View Bid Results For Cleaning Of Sump Pump Wells And Sump Drains Tenders

We found 93 Bid Results related to cleaning of sump pump wells and sump drains tenders. You can find Contractor details who won cleaning of sump pump wells and sump drains tenders along with contract details in Bid awards announcements section.

Indian Tenders
9
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
70
16
7
Tender Publishing Platform
3
90
State / UT
23
19
12
10
9
6
5
4
4
3
3
3
2
2
2
1
1
1
1
1
1
1
1
1
Contract Value
26
7
36
24
Publish Date
0
0
0
0
0
Sector
15
37
10
8
7
6
6
6
3
3
2
1
1
1
1
1
Ownership
5
37
34
14
7
1
Within keyword
Active filters:
Showing 1–2 of 93 tenders matching your filters
1.
Defence #11315637 Technical Bid
Tender for M&L For Taking Up Or Down Old Rusted Gi Tubings And Connections From Trenches Or From Walls/Ceilings For The 100 Mm Bore. , All As Per Item No -1 Above But 80 Mm Bore. , All As Per Item No -1 Above But 50 Mm Bore. , All As Per Item No -1 Above But 40 Mm Bore. , All As Per Item No -1 Above But 25 Mm Bore. , Supply And Lay Pipes Galvanised Gi Tubing 100 Mm Bore Medium Grade In Trenches And Connection In Old Or New Position Including Fitting Like Socket / Union / Tee / Reducer Nipple Etc Complete All As Directed. , All As Per Item No- 6 Above But 80 Mm Bore. , All As Per Item No- 6 Above But 50 Mm Bore. , All As Per Item No-6 Above But 40 Mm Bore. , All As Per Item No- 6 Above But 25 Mm Bore. , Taking Down And Refixing Old Steel Tubing After Cleaning And Connections In New Or Old Position (Walls, Ceiling,Floors) Including Earth Work And Fittings As Reqd At Site Of Size 100 Or 80 Mm Bore. , All As Per Item No -11 Above But Size 40 Or 50 Mm Bore. , All As Per Item No -11 Above But Size 25 Or 32 Mm Bore. , All As Per Item No -11 Above But Size 20 Mm Bore. , Cutting Existing Steel Tubing 100 Or 80 Mm Bore For Alterations Or Additions (Each Cut Measured) , All As Per Item No -15 Above But 40 Or 50 Mm Bore. , All As Per Item No -15 Above But 25 Or 32 Mm Bore. , Exacavation In Trenches , N.Exc 1.5 M Wide And N.Exc 1.5 M In Depth For Laying Of Pipes Or For Run Lead Joint And Getting Out In Hard/Dense Soil. , Returning, Filling In Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25Cm. , Removing Excavated Soil N.Exe 50Mtr & Depositing Where Directed At A Level N.Exe 1.5M Above The Starting Point. , Supply And Fix In Repair Sluice Valve 100 Mm Bore Of Cast Iron Body With Flanged Ends Duly Drilled Isi Marked As Per Is (14846-2000) Pn-1.6 With Spindle And Check Nut Including Operating Wheel Etc. And Fixed With New Bolts, Nuts, Washers And Rubber Insertion Packing Complete All As Specified And Directed. , All As Per Item No -21 Above But 80 Mm Bore. , Taking Down The Old Unserviceable Spindle From Sluice Valve 150 Mm Bore And Fixing With New Spindle As Per The Existing Size And Shape Of Manufactures Including Replacement Of Connected Check Nuts Washers, Rubber Gasket , And Gland Packing To Arrest Any Leakage And And Reassembling Complete For Smooth Functioning Of Sluice Valve All As Directed For Following Sizes , All As Per Item No -23 Above But 100 Mm Bore. , All As Per Item No -23 Above But 80 Mm Bore. , Supply And Fix In Repair Gun Metal Gate Valve With Iron Wheel Head Screwed Both Ends For Iron Pipe And Fixed Size 50 Mm Dia. , All As Per Item No -26 Above But 40 Mm Bore. , All As Per Item No -26 Above But 25 Mm Bore. , Dismantling Of Old Valve Chamber Of Any Size Including Taking Out Rusted Ms Sheet With Angle Iron Frame All As Directed At Site. , M & L For Construction Of Valve Chamber Of Size 900X900x900 Mm Including Necessary Earth Work Excavation Plain Cement Concrete 1:4:8 In Foundation Type D2 Using 40 Mm Grade Stone Aggregate, Brick Wall In Cm 1:4, Plain Cement Concrete 1:2:4 Type B1 For Copping, 15 Mm Thick Rendering In Cm 1:4 Including Provision Of Ms Sheet Cover 3.0Mm Thick With Ms Angle Frame 25X25x3mm All Round And At Diagnols Of Size 40 X 40 X 6Mm And Also Ms Plate Welded To Ms Angle, Embedded In Concrete With Suitable Hinges And Locking Arrangement, Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Necessary Excavation Earth Work Etc, All As Specified And As Directed. , All As Per Item No -30 Above But 600X600x600 Mm. , M&L Cutting The Road Hard Standing & Making Good Surface With Plain Cement Concrete 1:3:6 C-2 Type Using 40 Mm Graded Stone Aggregate & Removing The To Distance N.Exe 50Mtr All As Specified. , M&L For Stone Masonry For Walling Of Random Rubble, Uncaused, Well Bonded, Built In Cement Mortar 1:4 For Construction Of Thrust Block For The Support Of Water Supply Pipe Line. , M&L For Arrresting Of Leakge Of Pipe Line Of Size Upto 80 Mm Gi/Ppr Pipe Line By Using Of Short Length Of Gi/Ppr Pipe,Welding, Including All Fittings. Note:-(I) The Rate Included All Gi/Ppr Fittings,Nut,Bolts Etc (Ii) Earth Work Shall Be Measured And Paid Seperately (Iii) Gi/Ppr Pipe Will Be Mesured And Paid Seperately , S&F 3-Layer Pp-R P O L Y P R O P Y L E N E Random Copolymer) Pipes 110 Mm Dia Sdr 11 Uv, Pn 10 Stablised And A N T I M I C R O B I A L Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded P O L Y P R O P Y L E N E Random Fittings Fixed Complete To Walls, Ceilings In Floors Or Laid In Trenches Etc.Including Taking Down Of Old Pipe. , All As Per Item No -35 Above But 90 Mm Dia. , All As Per Item No -35 Above But 75 Mm Dia. , All As Per Item No -35 Above But 63 Mm Dia. , All As Per Item No- 35 Above But 50 Mm Dia. , All As Per Item No -35 Above But 40 Mm Dia. , All As Per Item No- 35 Above But 32 Mm Dia. , All As Per Item No -35 Above But 25 Mm Dia. , M&L For Making Connection Of Pp-R Distribution Branch 50 To 75 Mm With Pp-R Main Of Following Sizes By Providing And Fixing Tee Including Cutting And Making Fusion Joint Etc. , All As Per Item No -43 Above But 16 To 40 Mm Dia. , S&F Pp-R Gate Valves (Brass Insert) 63 Mm As Per Requirement Of The Site. , All As Per Item No- 45 Above But 50 Mm Dia. , All As Per Item No -45 Above But 40 Mm Dia. , All As Per Item No- 46 Above But 32 Mm Dia. , All As Per Item No -45 Above But 25 Mm Dia. , M&L For Disconnecting Existing Tanks, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required & Cleaning And Removing All Scale And Dirt, Etc, From Tanks And From Mouths Of Circulating Pipes,Reconnecting And Re-Fixing In Position And Etc Of Exc 250 Ltr But Not Exc 500 Ltrs , All As Per Item No -50 Above But Exc 500 Ltrs But Not Exc 1000 Ltrs , All As Per Item No -50 Above But Exc 1000 Ltrs But Not Exc 2000 Ltrs , S & F In Repair Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) 500 Ltr Capacity Hoisted And Fixed In Position All As Specified In Ssr Part I Including Taking Down Old One. , All As Per Item No- 53 Above But 750 Ltrs Capacity. , All As Per Item No- 53 Above But 1000 Ltrs Capacity. , All As Per Item No -53 Above But 2000 Ltrs Capacity. , S&F Ball Valves High Pressure Of Ptmt 15 Mm Bore With Epoxy Coated Aluminium Rod & Highdensity Plastic Ball Screwed For Iron Pipe And Fixed. (Minimum Weight 15Mm-142Gms/ 2 0 M M - 2 1 0 G M S . /25Mm-455Gms / 40Mm - 690 Gms) , All As Per Item No -57 Above But 20 Mm Bore. , All As Per Item No -57 Above But 25 Mm Bore. , All As Per Item No -57 Above But 40 Mm Bore. , M&L For Cleaning Of Of Under Ground/Above Ground Water Sump ,Sadmention Tank,Raw Water Tanks By Scraping The Internal Surface With Steel Wire Brushes,Pumping Out Water Up To Bottom Level Complete Drain Out Removing Slit/Debris Descaling With Soloution And Applying Two Coats Of Lime White Wash Internally As Diorested By The Engr In Charge ,Cleaning The Internal Surface Of The Tanks To The Complete Stasification And As Directed By Engr In Charge For The 20000 To 40000 Ltrs Capacity. , M&L For Cleaning Of Of Under Ground/Above Ground Water Sump ,Sadmention Tank,Raw Water Tanks By Scraping The Internal Surface With Steel Wire Brushes,Pumping Out Water Up To Bottom Level Complete Drain Out Removing Slit/Debris Descaling With Soloution And Applying Two Coats Of Lime White Wash Internally As Diorested By The Engr In Charge ,Cleaning The Internal Surface Of The Tanks To The Complete Stasification And As Directed By Engr In Charge For The 45000 To 80000 Ltrs Capacity. , S&F Mechnical Joint Suitable For Di/Ci/Gi Pipe Of 80 Mm Dia. , S&F Mechnical Joint Suitable For Di/Ci/Gi Pipe Of 100 Mm Dia. , S&F Mechnical Joint Suitable For Di/Ci/Gi Pipe Of 150 Mm Dia. , Taking Down Old Serviceable Ppr Pipe Of Any Size Or Rating (80 Mm To 110 Mm) From Site After Cleaning Of Pipe Line / Cutting Repair Of Water Leakage And Refixing At Site Including Gi / Ppr Fitting As Required At Site All As Directed And Specified By Engr In Charge. , Taking Down Old Serviceable Ppr Pipe Of Any Size Or Rating (25 Mm To 65 Mm) From Site After Cleaning Of Pipe Line / Cutting Repair Of Water Leakage And Refixing At Site Including Gi / Ppr Fitting As Required At Site All As Directed And Specified By Engr In Charge. , S & F In Repairs Valve Pit Chamber Cover Of Ms Sheet Cover 3 Mm Thick With Handle And Locking Arrangement Including Painting With Two Coats Of Synthetic Enamelled Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. , M & L For Servicing Of Monoblock Pump Sets 5 To 7.5 Hp Multistage Self Priming Including Painting With One Coat Of Synthetic Enamel Paint And Replacing Of Following Parts All As Directed :- (A) Bearing Of Pump (B) Suction Strainer (C) Worn Out Nuts And Bolts , M & L For Rewinding The Monoblock Motor With Super Enamelled Wire Of Existing Gauge And Weight In The Coil Terms With Other Materials For 3 Phase 415 Volts, 50Hz After Cutting Replacing Of Warn-Out Bolts And Nuts Including Changing Of Bearings All As Directed Of Capacity Upto 5 Hp. Note : Repairing & Transporting Charges Are Including Rates. , S & F In Repair Gi Flange 80 -100 Mm Dia With All Fixing Arrangement In Gi Pipe Line All As Directed And As Specified By Engr In Charge. , S & F In Repair Ms Flange 80 -100 Mm Dia With All Fixing Arrangement In Existing Pipe Line All As Directed And As Specified By Engr In Charge. , S & F In Repair Ms Flange 150 Mm Dia With All Fixing Arrangement In Existing Pipe Line All As Directed And As Specified By Engr In Charge. , Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning,Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm,In Hard/Dense Soil. , M&L For Providing Plain Cement Concrete 1:4:8 Type D2 Using 40Mm Graded Stone Agrigate As Foundations,Filling And Mass Concrete Complete All As Specified Directed. , Note : Above Work / Item Will Be Operated / Executed As Per Planning / Breake Down And User Requirment Basis,So Contractor Will Depute Their Man Power As Per User Requirment/Breake Down Basis As Directed By Je/Engr In Charge On Telephoncally . No Extra Cost Will Provided To The Contractor.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
2.
Railways #11310775 AOC
Bids Are Invited For Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Floor Cleaning By Dry Sweeping And Collect & Dump The Waste; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Floor Cleaning By Mechanized/Manual Scrubbing; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Floor Cleaning By Dry Sweeping Followed By Wet Moping; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Washing Of Canteen Floor By Applying Detergent; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Washing Of Toilet (Total 18 Nos) And Drinking Water Cooler; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Cleaning Of Surface & Underground Drains By Removing Plastics And Then De-Silting Of Waste; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Rag Picking, Jungle Cutting, Disposal Of Dead Animals, Collecting And Dumping Of Waste; Both Indoor And Outdoor , Collection & Disposal Waste Management Service - Collection Of Wheel Turning And Boring Scrap; Dry Waste , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Disposal Of Waste Accumaulated From All Cleaning Activities; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Loading Of Railway Loose Scrap/Brake Block Etc On Lorry From Various Location; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Cleaning Of 03 Nos Of Sump Well Of Pump House No -1,2,&3 And Dumping At Nominated Vat, Floating Object Removal & Foot Valve Cleaning; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Mechanized Cleaning Of 03 Nos Of Sump Well Of Pump House No-1,2,3 By Removing Slit And Sump; Both Indoor And Outdoor , Cleaning, Sanitation And Disinfection Service - Outcome Based - Emu Carshed Howrah; Mechanized Cleaning And De-Sliting Of Underground Septic Tank, Removal And Disposal Of Slit From Each Line Connecting Toilet To Septic Tank; Both Indoor And Outdoor
Contract Date: Ref. Documents Contract Value : ₹ 88.35 Lakh
Government Departments No of Bidders 11
West Bengal View Result →
3.
Defence #11213484 AOC
Tender For Repair And Maintenance Of Pumpsets, Submersible Pumpsets, Misc Works, Cleaning And Disnfecting Ug Sumps, Oh Reservoirs At 2Wing And 9Brd Afs Pune Under Ge (Af) Lohegaon.; 1 Taking out the submersible pump/Openwell Submersible Pump set forrepairsand lowering down after repairs the submersible pump set of any capacity& of any type from the bore well to a depth of not exc. 70 mtrs including scrapping of the existingpaint of submersible pump set and applying two coats of anti corrosive paint over a coat of primer complete after repair / replacement of spares and commisssioning all as directed by Engr-in-Charge.NOTE: COST OF REPAIR SHALL BE MEASURED AND PAID AGAINST RELEVANT ITEM 2 Repairs to submersible Pump set of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weightof PVC insulated copper conductor incl renewal of thrust plate,CI bowl,pump shaft,impeller ,Bearing,strainer,bush cable gaurd etc. reassembling, testing and commissioningcomplete all as directed by Engr-in-Charge. 3 Repairs toNon clog ,Open well submersible Pump set of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weightof PVC insulated copper conductor incl renewal of Mechanical seal, Bearing ,thrust plate,CI bowl,pump shaft,impeller ,strainer,bush cable gaurd etc. reassembling, testing and commissioningcomplete all as directed by Engr-in-Charge. 4 Renewal of column pipe 50 mm dia heavy duty ISI marked ,10 feet lengthboth ends machine threaded with longthread heavy duty socket complete all as directed by Engr-in-Charge. 5 Replacement of unserviceablePVC weather proof cable and replacementwithnewPVC weather proofcopper cable for size3 core2.5 sqmm suitable for submersible pump set complete all as directed by Engr-in-Charge. 6 Replace of non return valve gun metal 50 mm bore complete all as directed by Engr-in-Charge. 7 Replace of non return valve gun metal 150 mm bore complete all as directed by Engr-in-Charge. 8 Taking outold unserviceable MCCB 400/360 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,400 Ampsall as directed. 9 Taking outold unserviceable MCCB 250 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,250 Ampsall as directed. 10 Taking outold unserviceable MCCB 200 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,200 Ampsall as directed. 11 Taking outold unserviceable MCCB 160 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,160 Amps. 12 Taking outold unserviceable MCCB 100 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,100 Amps. 13 Taking outold unserviceable MCCB 63 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,63 Amps. 14 Material and labour for reparing/maintenance of existing electrical panel boards of pump sets by replaing worn out spares as starter/single phase preventor/relay /contactors MCCBs / MCBs / switch gear / cable glands/ lugs pin type,U type etc, cleaning of panel board, tightening of cable connection to avoid sparking, insulating bus bars bracket portion of conductor and to ensuring proper function of the panel board all as directed by Eng-in-Charge.NOTE: ( I ) Cost of spares as starter /single phase preventor/voltmeter/Amp meter/ relay / contactor /MCCBs/ MCBs / Switch gear / cable gland etc shall be measuredand paid against relevant item.(ii) Cost of lugs (pin type / U Type) ,insulation taps shall be included in quoted rate.(iii) Cost of fixing of spares shall deemed to be included in quoted rate. 15 Renewals/replacingthe followingspares to the existing elecrical panels complete all as directed by Engr-in-Charge. 16 S& F Voltmeter/Ammeter ,3 phase for range 0-200A Class-I, suitable as per existing 17 S&F in replacement of old unserviceable contactor ofcapacity upto 45 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contactor 18 S&F in replacement of old unserviceable contactor ofcapacity upto 95 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contactor 19 S&F in replacement of old unserviceable contactor ofcapacity upto 110/120 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contatctor 20 Over load relay 3 phase 415 Volts with range 16 to 45 A suitable for existing 21 Over load 3 phase 415 Volts relay with range 45 to 88 A suitable for existing 22 S& F Single phase preventor including Timer,415 V suitable for 100 HP motor. 23 Dismantling the centrifugal Pump/monoblock pumpset with motor of capacity Upto 3HP including disconnecting suction and delivery, power supply cable etc and reassembling same after replacement of necessary spares including greasing and painting of 2 coats of synthetic enamel paint using spray machine complete and replacing the same and testing all as specified and as directed by Engr in charge.NOTE: 1.In case of Centrifugal pump dismantling of pump and motor will be paid seperatly.2. In case of Monoblock pumpset pump/motor paid as one3. Spares such as bearing, bush, gland packing, coupling, capacitor will be measured & paid seperately 24 All as per item no 16 but for the capacity of 5 HP to 7.5 HP 25 All as per item no 16 but for the capacity of 10 HP to 15 HP 26 All as per item no 16 but for the capacity of 20 HP to 30 HP 27 All as per item no 16 but for the capacity of 40HP to 50HP. 28 All as per item no 16 but for the capacity of 60HP to 75 HP 29 All as per item no 16 but for the capacity of 90HP to 100HP 30 Supply only following worn out spares of Centrifugal/monoblock pump sets. 31 Bearing as per existing Size suitable for up to 3HP motor 32 Bearing as per existing Size suitable for 5HP to 7.5 HP motor 33 Bearing as per existing Size suitable for 10 HP to 12.5 HP motor 34 Bearing as per existing Size suitable for 20 HP to 30HP motor 35 Bearing as per existing Size suitable for 40HP to 50 HP motor 36 Bearing as per existing Size suitable for 60HP motor 37 Bearing as per existing Size suitable for 75 HP motor 38 Bearing as per existing Size suitable for 90 HP motor 39 Bearing as per existing Size suitable for 100 HP motor 40 Rubber bush/star rubber for coupling as per existing size for upto 30 HP motor 41 Rubber bush/star rubberfor coupling as per existing size forupto 50HP motor 42 Rubber bush/star rubber for coupling as per existing size forupto 75 HP motor 43 Rubber bush/star rubber for coupling as per existing size for upto90 HP motor 44 Rubber bush/star rubber for coupling as per existing size for upto 100 HP motor 45 Gland packingupto30 HP pump 46 Gland packing for 40 HP motor 47 Gland packing for 50 HP motor 48 Gland packing for 60 HP motor 49 Gland packing for 75 HP motor 50 Gland packing for 90 HP motor 51 Gland packing for 100 HP motor 52 Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 5HP,12.5HP,20HP 53 Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 30HP,40HP,50HP 54 Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 60HP,75HP,90HP,100HP 55 Overhauling/servicing of Suction sweeper assembly trolley mounted with mud pump motor head 11.5 mtr make; Kirloskar for swimming pool complete all as specified and directer by Engr-in-charge. Notes:- including spares require for making the assembly serviceable deemed to be included in subjected item. 56 M & L for Rewinding ofelectric motor 3 phase, 415 Volt capacity 1/2HP TO 3 HP, incoming disconnection electric connections, dismantling slots, taking out burnt windings and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing,greasing, painting with super enameled paint as per colour coad assembling the motor after rewinding and mounting at its ownposition, replacing the old nut,bolts and testing all as directed. 57 All as per item no. 28 but for the capacity of 5HP. 58 All as per item no. 28 but for the capacity of 10HP,12.5HP 59 All as per item no. 28 but for the capacity of 15HP,20HP. 60 All as per item no. 28 but for the capacity of 30HP. 61 All as per item no. 28 but for the capacity of 40HP 62 All as per item no. 28 but for the capacity of 50HP 63 All as per item no. 28 but for the capacity of 60HP. 64 All as per item no. 28 but for the capacity of 75HP. 65 All as per item no. 28 but for the capacity of 90HP. 66 All as per item no. 28 but for the capacity of 100HP. 67 Taking out unserviceable foot valve 80 mm dia from the UG sump and S & F new foot valve 80 mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. 68 Taking out unserviceable foot valve 100 mm dia from the UG sump and S & F new foot valve 100mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. 69 Taking out unserviceable foot valve 150 mm dia from the UG sump and S & F new foot valve 150mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. 70 Supply and fix spares for pumps of DSM 150/45, DSM 100/36, DSM 125/45, DBHS 71 a) Impeller 1st , II nd Stage 72 b) Pump Shaft 73 c) Shaft sleave 74 d) Cartrige bearing DE/NDE 75 e) Through bush 76 f) Split gland coupling 77 g) Wear ring 78 h) Lantern Ring 79 h) Gland coupling 80 Supply and replacing Automatic DOL starter suitable up to5 HP submersible/ centrifugal pump set 81 Supply and replacing Automatic star Delta starter suitable 7.5 HP to 12.5 HP submersible/ centrifugal pump set 82 Replacement of nuts bolts to top & bottom cover of DSM pump 100 HP, 90 HP, 75 HP. 83 Supply & fixing in replacement LT cable 1100 volts grade PVC insulated multistranded copper conductor cable single core of size 35 sqmm. 84 M&L for cleaning and sterilization of inside the RCC/ Steel Underground/semi underground/Over head/Sedmentation/clear water sumpsof capacity.(a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank .(c). Third strage is fresh water cleaning by high speed jet pump.(d). Fourth stage and first bacteria screening is decertification.(e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacterio screening and sterilizing method by using ultra violet ray within the tnk and kills all suspended bacteria. (g)Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent. NOTE:-(i) COMPANY WILL SUBMIT LABORATORY TEST CERTIFICATE OF CHEMICAL USED BEFORE CLEANING, FIX THE STICKER MENTIONING THE DATE OF CLEANING & NAME OF SITE AND ALSO PROVIDE CERTIFICATE CONFIRMING THE COMPLETION OF STERILIZATION OF WATER TANKS MENTIONING THE NAME OF STATION AND DATE OF CLEANING. ALL THE CLEANING & STERILIZATION STAFFS SHOULD BE UNDER ACCIDENTAL INSURANCE COVERAGE. (ii) OUTLET PIPE OF OHT SHOULD BE PLUGGED BEFORE CLEANING THE OHT TO AVOID.ENTERING SCALS AND THE SAME SHELL BE RECONNECTED AFTER CLEANING THE OHT AND THE QUOTED RATE IS DEEMED TO INCLUDE FOR THE ROVISION . (III) STERILIZATION TEAM WILL BE COMPRISED OF AT LEAST 30% MEMBERS WHO ARE MINIMUM03 MONTHS CERTIFICATE HOLDER IN WATER TANKS STERILIZATION. (IV) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK IE. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE/ BLOCKAGE TO BE INCLUDED IN QUOTED RATE. NOTE:-THE WORK SHALL BE CARRIED THROUGH SPECILIZED AGENCY. 85 a)All as per Item no. 50 but for UG sump 100000 gallons capacity 86 b) All as per Item no. 50 but for UG sump10,000 gallons capacity 87 c)All as per Item no. 50 but for UG sump50000/30000 gallons capacity 88 d)All as per Item no. 50 but for O H Reservoir 300000 glns capacity 89 e)All as per Item no. 50 but for O H Reservoir 50000 glns capacity 90 f)All as per Item no. 50 but for O H Reservoir 150000 glns capacity 91 g)All as per Item no. 50 but for O H Reservoir 10000 glns capacity 92 h)All as per Item no. 50 but for O H Reservoir 25000 glns capacity 93 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity up to 10000 Glns complete all as specified and directed by Engr-in-charge 94 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 10001 to 15000 Glns complete all as specified and directed by Engr-in-charge 95 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 15001 to25000 Glns complete all as specified and directed by Engr-in-charge 96 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 50000 Glns complete all as specified and directed by Engr-in-charge 97 S&F spare parts of chlorine dozers at various loaction as per directed by Engineer in charge 98 a) Pump head (ferrules 1/4 & duckbill included) 99 b) Pump Tube (pack of 5) 100 c) Injection cheack valve 3/8 101 d) 3/8 white suction/discharge tubing 102 e) Check valve duck bill only (pack of 5) 103 f) Connecting nut 3/8 104 g) Connecting nut 3/8 with adapter(pack of 5) 105 h) Ferrule 1/4 (pack of 24) 106 Supply and fix XLPE insulated, armoured heavy duty electric cable withn aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm,3.5 core as per direction of Engineer in charge 107 Supply and fix wall mounted metal enclosure consist of On load change over of capacity 250 Amps 415V, 4 pole to be installed as per the direction of Engineer in charge 108 Supply and fix wall mounted metal enclosure consist of On load change over of capacity 400 Amps 415V, 4 pole to be installed as per the direction of Engineer in charge 109 Supply only drinking water testing Kit having testing water parameter like PPM of chlorine,PH etc . 110 Supply only O tolidine reagent for testing of chlorine content in drinking water as per direction of engineer in charge. 111 Supply only swimming pool water clarifier as per direction of Engineer in charge 112 M & L for installation of sign board made of 3mm ACP sheet pasted on Recto Reflective Sign Board ncluding Frame working, SS Steel, fitting & Concreting work complete all as per direction and approval of Engineer in charge (Notes :- Matter/colour to be printed shall be provided by Deptt) 113 Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 12.5 HP 114 Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 50 HP 115 Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 100 HP
Contract Date: Jan 09, 2026 Contract Value : ₹ 15.52 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Maharashtra View Result →
4.
Power #11154703 AOC
Bids Are Invited For Revisioning Or Replacement Of De Journal Bearing Of Mdbfp Or Tdbfp Booster Pump One Job Consists Of One Pump - Revisioning Or Replacement Of De Journal Bearing Of Mdbfp Or Tdbfp Booster Pump One Job Consists Of One Pump , Revisioning Or Replacement Of Nde Journal Bearingof Mdbfp Or Tdbfp Booster Pump One Job Consists Of One Pump , Revisioning Or Replacement Of Thrust Bearing Of Booster Pump Of Mdbfp Or Tdbfp One Job Consists Of One Pump - Revisioning Or Replacement Of Thrust Bearing Of Booster Pump Of Mdbfp Or Tdbfp One Job Consists Of One Pump , Revisioning Or Replacement Of Nde Mech Seal Of Mdbfp Or Tdbfp Booster Pump One Job Consistsof One Pump , Revisioning Or Replacement Of De Mech Seal Of Mdbfp Or Tdbfp Booster Pump One Job Consistsof One Pump , Axial And Radial Alignment Of Mdbfp Booster Pump With Motor One Job Consists Of One Pump , Axial And Radial Alignment Of Tdbfp Booster Pump With Gear Box One Job Consists Of One Pump - Axial And Radial Alignment Of Tdbfp Booster Pump With Gear Box One Job Consists Of One Pump , Revisioning Or Replacement Of De Journal Bearing Of Feed Pump Of Mdbfp Or Tdbfp One Job Consists Of One Pump , Revisioning Or Replacement Of Nde Journal Bearing Of Feed Pump Of Mdbfp Or Tdbfp One Job Consistsof One Pump , Revisioning Or Replacement Of Thrust Bearing Of Feed Pump Of Mdbfp Or Tdbfp One Job Consists Ofone Pump , Revisioning Or Replacement Of Thrust Collar Of Feed Pump Of Mdbfp Or Tdbfp One Job Consists Of One Pump , Inspection Or Overhauling Of Tdbfp Gear Box , Revisioning Or Replacement Of Nde Mech Seal Of Feed Pump Of Mdbfp Or Tdbfp One Job Consists Of One Pump , Revisioning Or Replacement Of De Mech Seal Of Feed Pump Of Mdbfp One Job Consists Of One Pump , Revisioning Or Replacement Of De Mech Seal Of Feed Pump Of Tdbfp One Job Consists Of Onepump , Axial And Radial Alignment Of Mdbfp Motor With Hydraulic Coupling , Axial And Radial Alignment Of Mdbfp Feed Pump With Hydraulic Coupling , Axial And Radial Alignment Of Tdbfp Feed Pump With Drive Turbine , Axial And Radial Alignment Of Tdbfp Drive Turbine With Gear Box , Servicing Or Overhauling Portable Oil Purifier Of Mdbfp , Revisioning Or Replacement Of Thrust Bearing Of Bfp Turbine , Revisioning Or Replacement Of Front Journal Bearing Of Bfp Turbine , Revisioning Or Replacement Of Rear Journal Bearing Of Bfp Turbine , Revisioning Or Replacement Of The Burst Atmospheric Relief Diaphragm Of Tdbfp One Job Consists Of One Diaphragm , Overhauling Of Centrifuge Machine Of Tdbfp Onejob Consists Of One Centrifuge Machine , Revisioning Or Replacement Of Bearing Of Aop Or Eop Of Mainturbine One Job Consists Of One Pump , Revisioning Or Replacement Of Coupling Of Aop Or Eop Ofmain Turbine One Job Consists Of One Pump , Cleaning Inspection And Rectification Of Tube Leakages Of Turbine Oil Coolers If Any One Jobconsists Of One Oil Cooler , Overhauling Of Centrifuge Machine Of Main Turbineand Cot Or Dot One Job Consists Of One Machine , Revisioning Or Replacement Of Thrust Cum Radial Bearing Ofcep One Job Consists Of One Pump , Revisioning Or Replacement Of Mech Seal Of Cep One Job Consists Of One Pump , Complete Overhauling Of Condensate Extractionpump One Job Consists Of One Pump , Inspection Or Carrying Out Axial And Radial Alignment Of Cep With Motor , Complete Servicing Or Overhauling Of Vacuum Pump One Job Consists Of One Pump , Replacement Or Servicing Of De Bearing Of Vacuumspump , Replacement Or Servicing Of Nde Bearing Of Vacuumpump , Replacement Of De Mech Seal Of Vacuum Pump , Replacement Of Nde Mech Seal Of Vacuum Pump , Alignment And Adjustment Of Vacuum Pump Withmotor , Cleaning Inspection And Rectification Of Tube Leakages Of Vacuum Pump Heat Exchanger If Any One Job Consists Of One Heat Exchanger - Cleaning Inspection And Rectification Of Tube Leakages Of Vacuum Pump Heat Exchanger If Any One Job Consists Of One Heat Exchanger , Performing Of System Vacuum And Condenser Tube Leak Test And Attending All The Leakages By Plugging And Welding If Any , Repair Or Overhauling Of Ecw Pump One Jobconsists Of One Pump , Revisioning Or Replacement Of De Bearing Of Ecw Pump , Revisioning Or Replacement Of Nde Bearing Of Ecw Pump , Axial Or Radial Alignment Of Ecw Pump With Motor , Revisioning Or Replacement Of Nde Mech Seal Of Ecw Pump , Revisioning Or Replacement Of De Mech Seal Of Ecw Pump , Repair Or Overhauling Of Acw Pump One Job Consists Of One Pump , Revisioning Or Replacement Of De Bearing Of Acw Pump , Revisioning Or Replacement Of Nde Bearing Of Acw Pump , Axial Or Radial Alignment Of Acw Pump With Motor , Revisioning Or Replacement Of Nde Gland Of Acw Pump , Revisioning Or Replacement Of De Gland Of Acw Pump , Repair Or Overhauling Of Ball Circulation Pump , Axial Or Radial Alignment Of Ball Circulation Pump With Motor , Inspection Or Revisioning Of Hp Or Lp Bypass Oil Pump One Job Consists Of One Pump , Overhauling Of Dewatering Or Sump Pump One Job Consistsof One Pump , Revisioning Or Servicing Of Hanger Support Of Critical Pipe Lines And Their Resetting At Cold And Hot Set Value One Job Consists Of One Hanger Support - Revisioning Or Servicing Of Hanger Support Of Critical Pipe Lines And Their Resetting At Cold And Hot Set Value One Job Consists Of One Hanger Support , Revisioning Or Overhauling Of Tdbfp Over Speed Governor One Job Consists Of One Over Speed Governor , Coupling And Decoupling Of Bfp Turbine With Feedpump And Gear Box Only For Over Speed Test , Inspection Or Overhauling Of Control Fluid Pump , Inspection Or Overhauling Of Main Turbine Aop , Inspection Or Overhauling Of Main Turbine Eop , Inspection Or Overhauling Of Main Turbine Jop , Minor Inspection Or Replacement Of Bearing Of Control Fluid Pump Of Main Turbine One Job Consists Of One Pump , Rev Or Replacement Of Mdbfp Aop One Jobconsists Of One Pump , Minor Inspection Or Replacement Of Coupling Of Jopof Main Turbine One Job Consists Of One Pump , Major Inspection Or Overhauling Of Tdbfp Aop Onejob Consists Of One Pump , Major Inspection Or Overhauling Of Tdbfp Eop Onejob Consists Of One Pump , Cleaning Inspection And Rectification Of Tube Leakages If Any Of Lube Oil Coolers Of Mdbfp Onejob Consists Of One Cooler , Cleaning Inspection And Rectification Of Tube Leakages If Any Of Working Oil Coolers Of Mdbfp One Job Consists Of One Cooler , Inspection Oroverhauling Of Cot Or Dot Room Transferoil Pumps One Job Consists Of One Pump , Overhauling Of Transfer Oil Pumps Or Gear Oil Pumpsand Other Similar Pumps One Job Consists Of One Pump , Replacement Of Coupling Of Transfer Oil Pumps Or Gear Oil Pumps Or Tdbfp Jops And Other Similar Pumps One Job Consists Of One Pump - Replacement Of Coupling Of Transfer Oil Pumps Or Gear Oil Pumps Or Tdbfp Jops And Other Similar Pumps One Job Consists Of One Pump , Axial And Radial Alignment Of Transfer Oil Pump Or Recirculation Pump Or Tdbfp Jop Cot Or Dot Room Transfer Oil L Pump And Other Similar Pumps One Jobconsists Of One Pump , Overhauling Of Vapour Extractor Of Mot Or Control Fluid Tank Or Tdbfp Oil Tank And Seal Steam System One Job Consists One Vapour Extractor - Overhauling Of Vapour Extractor Of Mot Or Control Fluid Tank Or Tdbfp Oil Tank And Seal Steam System One Job Consists One Vapour Extractor , Cleaning Of Centrifuge Bowl Of Tdbfp One Job Consists Of One Centrifuge Bowl , Overhauling Of Recirculation Pump Of Vacuum Pump , Cleaning Of Tdbfp Oil Tank One Job Consists Ofone Oil Tank , Cleaning Of Main Oil Tank Of Turbine Or Cot Or Dot One Job Consists Of One Tank , Alignment And Adjustment Of Recirculation Pump Withmotor , Cleaning Of Centrifuge Bowl Of Main Turbine And Cot Or Dot One Job Consists Of One Centrifuge Bowl , Replacement Of The Burst Atmospheric Relief Diaphragm Of Lp Turbine , Inspection Or Cleaning Flushing And Normalization Of Condenser Hot Well , Inspection Or Cleaning Flushing And Normalization Of Deaerator , Inspection Or Cleaning Flushing And Normalization Of Feed Water Storage Tank , Inspection Or Cleaning Flushing And Normalization Of Tg Or Sg Ecw Tank One Job Consists Of One Tank , Replacement Of Turbine Hp Orlp Bypass Oil And Minor Revisioning Of Hp Bypass Oil System , Centrifuging Of Lube Oil Through Portable Centrifuging Machine , Inspection Or Cleaning Of Sg Plate Heat Exchanger , Inspection Or Cleaning Of Tg Plate Heat Exchanger , Inspection Cleaning And Revisioning Of Acw Pump Suction Strainer One Job Consists Of 01 Strainer , Filling Flushing And Normalization Of Tg Or Sg Ecw System One Job Per Cooling System , Cleaning And Revisioning Of Tdbfp Aop Suctionfilter One Job Per Filter , Cleaning And Revisioning Of Duplex Lube Oil Filterof Tdbfp One Job Per Filter , Cleaning And Revisioning Of Eop Filter Of Tdbfp , Cleaning And Revisioning Of Lube Oil Filter Of Mdbfp One Job Per Filter , Cleaning Of Duplex Lube Oil Filter Of Main Turbine One Job Per Filter , Cleaning Of Jop Duplex Filter Of Main Turbine One Job Per Filter , Cleaning Of Bucket Filter Of Main Oil Tank Or Control Fluid Tank One Job Per Filter , Cleaning Of Self Cleaning Filter Of Protection Rack Of Main Turbine 1 Job Consists Of Two Filters , Inspection Or Replacement Of Dry Filter Or Mechanical Filter Super Fine Filter One Job Per Set , Inspection Or Replacement Of Fuller Earth Filter One Job Per Set , Cleaning Of Duplex Filter Mounted On Valve Rack Of Governing System Of Main Turbine One Job Per Filter , Cleaning Of Cep Suction Strainer Or Bfp Booster Pump Suction Strainer One Job Per Strainer , Cleaning Of Bfp Conical Strainer One Job Per Strainer , Revisioning Or Replacement Or Cleaning Of Pilot Valve Of Main Turbine One Job Consists One Pilot , Revisioning Or Replacement Or Cleaning Of Pilot Valve Of M C V Or Aux C V Of Tdbfp One Job Consists One Pilot , Servicing Of Isolating Valve Control Valve And Nrvsof Condensate Line Tdbfp Extraction Extraction 5 And Booster Pump Suction Line Size400 Mm Class150 To 300 , Servicing Of Isolating Valve Control Valve And Nrvs Installed On Bfp Discharge Feed Discharge Line Hph Inlet Or Outlet Hph 50 Percentage Bypass And Other Similar Valve - Servicing Of Isolating Valve Control Valve And Nrvs Installed On Bfp Discharge Feed Discharge Line Hph Inlet Or Outlet Hph 50% Bypass And Other Similar Valve Size 350 Mm Class 2500 Design Press Up To 320Kg Per Cm2 Temp More Than 180 Oc , Servicing Of Hph 100 Percentage Bypass Valve And Feed Water Inlet To Economizer Of Size500 Mmclass2850 - Servicing Of Hph 100% Bypass Valve And Feed Water Inlet To Economizer Of Size500 Mmclass2850 , Servicing Of Bfp Recirculation Line Control Valve Size 200 Mm Class 2500 Design Press Up To 320 Kg Per Cm2 Temp More Than 180 Oc , Servicing Of Bfp Recirculation Line Isolating Valve And Scnrv Size200 Mm Class 2500 Design Press Up To 320 Kg Per Cm2 Temp More Than 180 Oc , Servicing Of Isolating Valve And Control Valve Frommain Steam Line To Auxiliary Steam Header Size200 Mm Class 2750 Spl Design Press 188 5Kg Orcm2 Temp 545 Oc , Servicing Of Main Steam Control Valve To Auxsteam Header Size 350 Mm Class 3500 Design Press 188 Point 5Kg Per Cm2 Temp 545 Oc , Servicing Of Isolating Control Valve And Scnrvs Installed On Aux Steam Extraction Steam Todeaerator Extraction Steam To Tdbfps Extraction Steam To Lph 3 - Servicing Of Isolating Control Valve And Scnrvs Installed On Aux Steam Extraction Steam Todeaerator Extraction Steam To Tdbfps Extraction Steam To Lph 3 Size 500 Mm Class 150 To 300 Design Press Less Than 40 Kg Per Cm2 Temp Less Than 330 Oc , Servicing Of Cep Suction Valve Size 500 Mmclass 150 Operating Press Less Than 40 Kg Per Cm2 Vacuum Temp 55 Oc , Servicing Of Isolating Valve And Scnrv From Crh To Deaerator Pegging Line Size800 Mm Class 600 Design Press 54 Kg Per Cm2 Temp 360 Oc , Servicing Of Isolating Valve From Crh To Deaerator Pegging Size300 Mm Class 1500 Design Press 54K G Per Cm2 Temp 360 Oc , Servicing Of Extraction Steam Valve Or Nrv To Lph 2 Size800 Mm Class 150 Design Press Vacuum Temp 135 Oc , Servicing Of Motor Operated Control Valve Motoroperated Gate Or Globe Valves Manually Operated Gate Or Globe Valves Check Valves Size 300 To 350 Mm - Servicing Of Motor Operated Control Valve Motoroperated Gate Or Globe Valves Manually Operated Gate Or Globe Valves Check Valves Size 300 To 350 Mm Class 150 To 300 Design Pr Less Than 40Kg Per Cm2 And Temp 350 Oc , Servicing Of Hp Bypass Spray Water Control Valves Spray Isolation Valves Nrvs On Turbine Side Size100 150 Mm Class2500 Pr 320Kg Per Cm2 And Temp 185 Oc , Servicing Of Hp Bypass Warm Up Line Regulating Valves Isolation Valves Nrvs And Other Similar Valve Size50 To 80 Mm Class 3000 Specials Pr 188 2Kg Per Cm2 And Temp 545 Oc , Servicing Of Turbine Mal Drain Valves Mal 11 Mal 12 Mal 22 Mal 26 Mal 27 Mal 31 Mal 32 Mal 47 Mal 51 Mal 52 Mal 54 Mal 55 Mal 65 Mal 81 Msv 105 Msv 106 Hrhv 105 Hrhv 106 And Other Similar Valves , Servicing Of Isolating Valve And Control Valve Of Feed Control Station Size250 Mm Class2500 Pr 320Kg Per Cm2 And Temp 260 Oc , Servicing Of Isolating Valve Control Valve And Nrvs Of Size250 Mm Class 150 To 600 , Servicing Of Isolating Valve Control Valve And Nrvsof Size150 Mm To 200 Mm Class1500 Pr 54 Kg Per Cm2 And Temp 360 Oc , Servicing Of Isolating Valve Control Valve And Nrvs Of Size150 Mm To 200 Mm Class 150 To 600 , Servicing Of Isolating Valve Control Valve And Nrvsof Size40 Mm To 50 Mm Class1500 To 2500 , Servicing Of Isolating Valve Size25 Mm Class 3000 Spl , Servicing Of Hp Evacuation Valve , Servicing Of Hydraulic Operated Vacuum Breaker Valve , Servicing Of Fisher Make Edr And Etr Series Control Valve For Tdbfp Oil System And Stroke Adjustment Of The Same , Servicing Of Change Over Valve For Coolers And Filters Of Bfps , Servicing Of Isolating Valve Control Valve And Nrvsof Size15 Mm To 100 Mm Class 1500 , Servicing Of Isolating Valve Control Valve And Nrvs Installed On Lp Lines And Oil Lines Size 15 Mm To 100 Mm Class Up To 800 , Replacement Of Lp Valves Of Different Floors Bycutting Of Damaged Valve And Arc Welding Of New Valve Size15 To 50 Mm , Replacement Of Hp Line Drain Valves Of Different Floors By Cutting Of Damaged Valve And Welding Ofnew Valve Size15 To 50 Mm , Replacement Of Hp Line Valves Of Different Floors Bycutting Of Damaged Valve And Welding Of New Valve Size Above50 To 65 Mm , Replacement Of Hp Valves Of Feed Water Or Main Steam Line Or Crh Line Or Hrh Line Etc Size Above Nb 65 To 150 Mm , Replacement Of Lp Valves Of Size Nb 300 Mm Pressure Rating Less Than 40Kg Per Cm2 , Replacement Of Lp Valves Of Nb 250 Mm Pressure Rating Less Than 40 Kg Per Cm2 , Replacement Of Lp Valves Of Nb 350 Mm Pressure Rating Less Than 40 Kg Per Cm2 , Replacement Of Heater Level Control Valves Ofpressure Rating Less Than 40 Kg Per Cm2 Size 150 Mm To 300 Mm , High Pressure Argon Or Arc Welding By Ibr Welder , Replacement Of Butt Welded Gate Or Globe Valves Oflp Lines Size80 To 100 Mm , Repair Or Replacement Of Lp Or Hp Piping By Cutting And Welding On Per Mm Id Basis , Replacement Of Flange Type Gate Or Globe Valves Oflp Lines Size75 To 100 Mm , Replacement Of Flange Gasket Of Hp Or Lp Valves And Piping On Per Mm Dia Basis Of Valve , Replacement Of Gland Packing Of Hp Or Lp Valves Onper Mm Dia Basis Of Valve , Replacement Of Hp Or Lp Heater Manhole Flange Gasket , Servicing Of Safety Valve Of Booster Pump Suction Cep Suction Condensate Side Of Lphs Valve Gland Sealing And Control Fluid Room , Servicing Of Safety Valve Of Hp Heater Deaerator And Fst Ht And Lt Header Of Aux Prds And Tdbfp Inlet Steam Line , Servicing Of Safety Valve Of Feed Water Line Of Hp Heaters , Revisioning Or Servicing Of Butterfly Valves Size 65 Mm To 250 Mm , Revisioning Or Servicing Of Butterfly Valves Size 300Mm To 800 Mm , Revisioning Or Servicing Of Tdbfp Exhaust Butterfly Valves Size1600 Mm , Revisioning Or Servicing Of Condenser Inlet Or Outlet Butterfly Valves Size 2200 Mm , Revisioning Or Servicing Of Nrv Installed On Acw Line And Ecw Line Size300 Mm To 500 Mm , Servicing Of Gear Boxes Of Butterfly Valves Installedon Acw And Ecw System Valve Size 65 To 250 Mm , Servicing Of Gear Boxes Of Butterfly Valves Installedon Acw And Ecw System Valve Size 300 To 600 Mm , Servicing Of Gear Boxes Of Butterfly Valves Installedon Acw System Valve Size 800 Mm , Servicing Of Gear Boxes Of Butterfly Valves Size 1600 Mm , Servicing Of Gear Boxes Of Butterfly Valves Size 2200Mm , Revisioning Or Servicing Of Ball Collector Ofcondenser Tube Cleaning System , Inspection Or Minor Repairing Of Ball Catch Strainer Of Condenser Tube Cleaning System Installed Inside Cw Return Line Of Size 2200 Mm , Round The Clock Up Keeping And Routine Maintenance Of Turbine Boiler Feed Pumps Ecw Acw System And Associated Auxiliaries - Round The Clock Up Keeping And Routine Maintenance Of Turbine Boiler Feed Pumps Ecw Acw System And Associated Auxiliaries Of Unit 6 In 03 Shifts During Running Of Unit Or Main Turbine Oil System Or Control Fluid System In Service One Jobconsists Of One Day Work In 03 Shifts For One Unit , Round The Clock Up Keeping And Routine Maintenance Of Turbine Boiler Feed Pumps Ecwacw System And Associated Auxiliaries - Round The Clock Up Keeping And Routine Maintenance Of Turbine Boiler Feed Pumps Ecwacw System And Associated Auxiliaries Of Unit 7 In 03 Shifts During Running Of Unit Or Main Turbine Oil System Or Control Fluid System In Service One Jobconsists Of One Day Work In 03 Shifts For One Unit , Preventive Minor Breakdown Maintenance And Cleaning Of Turbine Boiler Feed Pumps Ecw Acw System And Associated Auxiliaries - Preventive Minor Breakdown Maintenance And Cleaning Of Turbine Boiler Feed Pumps Ecw Acw System And Associated Auxiliaries Of Unit 6 In General Shift During Running Of Unit Or Main Turbine Oil System Or Control Fluid System In Service One Job Consists Of One Day Work For One Unit , Preventive Minor Breakdown Maintenance And Cleaning Of Turbine Boiler Feed Pumps Ecw Acw System And Associated Auxiliaries - Preventive Minor Breakdown Maintenance And Cleaning Of Turbine Boiler Feed Pumps Ecw Acw System And Associated Auxiliaries Of Unit 7 In General Shift During Running Of Unit Or Main Turbine Oil System Or Control Fluid System In Service One Job Consists Of One Day Work For One Unit , Checking And Filling Of Nitrogen Gas Of Unit 6 , Checking And Filling Of Nitrogen Gas Of Unit 7 , Replacement Of Bladder Or Servicing Of Accumulator One Job Per Accumulator , Cleaning Of Centrifuge Bowl For Trolley Mounted Portable Centrifuging Machine Makealfa Laval Model Ea Mab 103 , Cleaning Of Duplex Filter Installed In Tdbfp Governing Rack 2X500 Mw Dtps Anpara , Cleaning Of Edward Make Shr 22500 Vacuum Pump Cooler Filter Element , Cleaning Or Servicing Of Mechanical Seal Cooiling Skid Cooler Of Mdbfp Or Tdbfp 2X500 Mw Dtps Anpara , Cleaning Or Servicing Of Mechanical Seal Cooiling Skid Filter Of Mdbfp Or Tdbfp 2X500 Mw Dtps Anpara , Cleaning Of Water Tubes Of Tdbfp Oil Cooler Installed 2X500 Mw Dtps Anpara , Complete Overhauling Of Tdbfp Oil Cooler Installed 2X500 Mw Dtps Anpara , Inspection And Rectification Of Water Tube Leakages Of Tdbfp Oil Cooler Installed 2X500 Mw Dtps Anpara , Replacement Of Butt Welded Gate Or Globe Valve Of Lp Line Size 150 To 200 Mm , Replacement Or Servicing Of Main Pump Of Lpbp Hpsu Make Welland Tuxhorn Ag Dtps Anpara , Replacement Or Servicing Of Oil Cooler Of Lpbp Hpsu Make Welland Tuxhorn Ag Dtps Anpara , Replacement Or Servicing Of Recirculation Pump Of Lpbp Hpsu Make Welland Tuxhorn Ag Dtps Anpara , Replacement O Rservicing Of Regeneration Pump Of Lpbp Hpsu Make Welland Tuxhorn Ag Dtps Anpara , Replacement Of Tdbfp Mcv Or Acv Servo Cylinder For 2X500 Mw Dtps Anpara , Servicing Of Tdbfp Mcv O Racv Servo Cylinder For 2X500 Mw Dtps Anpara , Overhauling Or Servicing For Trolley Mounted Portable Centrifuging Machine Make Alfa Laval Model Ea Mab 103 , Attending Leakages From Stuffing Box Of Bfps , Inspection And Revisioning Of De Water Jackets Of Boiler Feed Pumps , Inspection And Revisioning Of Nde Water Jackets Of Boiler Feed Pumps , Threading Out Of Bfp Cartridge , Minor Overhauling Of Defective Bfp Cartridge Assembly , Threading In Spare Orrepaired Bfp Cartridge Assembly , Dis Assembly Checking Overhauling And Rectification Of Defective Booster Pump Assembly , Overhauling Of Hp Bypass Valve Bpv 1 Total Quantity : 21574
Contract Date: Ref. Documents Contract Value : ₹ 1.38 Crore
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
5.
Defence #10801071 Price Bid
Tender For Comprehensive B R And Em Repair Maintenance Works To 14 Asc Af Kakkanad Under Age I R D Kochi; 1 Hacking out old broken glass panes 4 mm thick from steel frame including putty/ metal beadings and supply and fix sheet glass ordinary 4 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete all as specified and as directed 2 Hacking out old broken glass panes 4 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 4 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary oil putty/wooden beads complete all as specified and as directed. 3 S&F in repairs extruded aluminium anodised 150 mm long handles fabricated type. 4 All as per item No 3 above but 100 mm long. 5 Supply and fix in repairs foot operated door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring and cover plate overall length 150 mm including taking down defective foot operated door stopper all as specified and as directed. 6 S&F in repairsmortice lock brass 4 levers vertical type 100 mm 7 S & Fin repairs door closer hydraulically regulated, castiron body, designation No -3, universal type ,suitable for door shuttersof 851 to1000 mm in width and of wt between 61 to 80 Kg and fixed 8 Re securing and easing to wooden shutters of any description area n.exc 1 Sqm each without taking down the shutter all as specified and as directed. 9 Re securing and easing to wooden shutters of any description exc 1 Sqmbut n.exc 2 Sqm each without taking down the shutters all as specified and as directed. 10 S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long. 11 All as per item No 10 above but 100 mm long. 12 S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long 13 Taking down shutters exc 1 sq. m and n exc2 sq. m each and re-fixing in same openings. 14 Taking down shutters n exc 1 sq. m each and re-fixing in same openings. 15 S&F in repairs Butt hinges, medium weight cold rolled mild steel 100 mm size. 16 All as per item No 15 above but 75 mm size. 17 Taking down and removing to or from store chowkats or framesexc 1.5 sq. m and not exc 4 sqm each but with shutters (without taking off shutters from the frames) 18 S&F Solid PVC door frame of size 50mm x 47mm made of of 5mm plain color PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing. 19 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain color PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain color PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 20 S&F Aluminium, anodised, barrel tower boltsof extruded section and fixed length of bolt in 200 mm complete all as specified and directed. 21 S&F Butt hinges, medium weight, cold rolled mild steel, and fixed size of hinges in 100 mm complete all as specified and directed. 22 S&F Aluminium handles, cast type, anodised size of handle in 150mm 23 Supply and fix in repair PVC low level flushing cistern 10 liters capacity with ISI mark including inlet, ball valve, float, handle and brackets etc. including taking down old defective low level flushing cistern all as specified and as directed. 24 Supply and fix plastic seat and cover superior quality closed pattern with flat bottom of heavy duty including necessary hinged devices, including taking down damaged/ broken plastic seat and cover from EWC all as specified and as directed. 25 Supply and Fix in repair PVC connection with PTMT nuts of length 450 mm screwed for iron pipe15 mm bore. 26 Supply and fix in repair 15 mm dia CP pillar cocks fancy type for wash hand basin including taking down existing pillar cock, all as specified and as directed. 27 Supply and fix 150 mm square grating of PTMT to floor trap/nahani trap including taking down existing damaged CI grating from floor tap/nahani trap all as specified and as directed. 28 Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore pipe, all as specified and as directed. 29 All as per item No 28 above but 20mm bore. 30 All as per item No 28 above but 25/32 mm bore. 31 Supply and fix Unplasticised PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 32 Supply and fix Unplasticised PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 33 Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 34 S&F in repairs bib taps 15mm bore, cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed for iron pipe or for brass ferrule all as specified and as directed 35 S&F in repairs stop valves 15mm bore, cast copper alloy chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. 36 S&F in repairs vitreous china wash basin white flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper including brackets all as specified and as directed. 37 S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe). 38 Supply and fix tubular towel rail aluminium anodised20 mm dia D type 60 cm long between flanges including taking down defective aluminium tubular towel rail all as specified and as directed. 39 Supply and fix in repair beveled edgedmirror of size 600 x 450 mm selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. 40 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore. 41 All as per item 40 above but 110 mm bore 42 S&F PVC (SWR) bends any radius 75 mm bore 43 Supply and fix in repairs 100 mm dia CIfloor trap/nahani trap including taking down existing damaged CI grating from floor trap/nahani trap 44 M&L Dismantling water tanks and removing to store exc 250 & n exc 500 capacity 45 M&L Dismantling water tanks and removing to store exc 500 & n exc 1000 capacity 46 M&L Rotational moulded polyethylene water storage tanks 500 litres capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia PTMT Ball valve high pressure all as directed. 47 Allas per item No 46 above but 1000 ltr capacity 48 M & L for PU injection grouting by making necessary holes of 8 to 10 mm in concrete to a depth of about 75mm using proper electric hammer drill. Fix new nipples of 8 to 10mm using aluminum pipes using neat cement or M-Seal for proper anchorage. Carry-out pressure grouting using shaligrout 2k /equivalent) using a proper grouting pump. Seal the holes properly after the grouting nipples have been removed all as specified and directed by Engg -In Charge. 49 Material and labour for taking down old plaster and rendering 10mm thick in CM 1:6 on other than fair faces of brickor concrete surfaces finishing smooth and even and smooth without using extra cement making good match the old surface finish. 50 M&L two coat of OBD over a coat of primer on newly plastered surfaces of wall including cornices and preparation of surfaces. 51 M&L pre laminated particle board 12mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixture with screws to frame work 52 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge 53 M&L Screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge 54 M&L Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces, finished fair and even for receiving wall tiles. 55 S&F glazed ceramic coloured tiles 300 x 200 x 7 mm thickon vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over 10 mm thick rendering (backing coat)in cm 1:3, complete all as specified and directed by Engineer-in-Charge. 56 M & L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm In floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge 57 S&F Vitrified ceramic coloured tiles 10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match 58 S&F in repairs health faucet 15mm size chromium plated standard size all as specified and directed. 59 Supply and fixed in repairs stainless steel wire cloth, 0.63mm nominal dia of wire and average width aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples 60 M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removingthe debris with in a lead of 100 meters as directed by Engineer-in-charge. 61 M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge. 62 M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd. or equivalent) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge. 63 M&L for plastering with Nitobond SBR (Styrene butadiene polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd or equivalent) modified cement mortar (1:4) under the slab to an average thickness of 40 mm (applied in two layers not exceeding 20mm each) , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge. 64 M&L Preparation of newsurfaces of ceiling and applying two coats of distemper oil emulsion on ceiling over a coat of primer over 3 mm thick wall care putty plastered and other surfaces with alkali resistant priming paint complete all as specified. 65 Taking down cement plaster of any description on walls incl raking out joints, hacking for key scrubbing down with water 66 M&L for plastering in CM1:6, 10 mm thick on interior walls finished even and smooth w/o using extra cement. 67 M&L for plasteringin CM 1:3, 5mm thick on ceiling finished even and smooth w/o using extra cement 68 M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Professional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces . 69 M&L Preparation of Newsurfaces of internal walland applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 70 M&L Preparation of oldsurfaces of internal wall by complete removal of existing treatment , and applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 71 M&L Preparation of old surfaces of ceiling by complete removal of existing treatment, and applying two coats of distemper oil emulsion on ceiling over a coat of primer, plastered and other surfaces with alkali resistant paint complete all as specified. 72 Demolition of brick work / PCC block masonry work built in cement mortar etc complete all as specified. 73 M&L Precast Concrete block masonry with solid blocks in PCC 1:3:6 type C1 (using 20 mm stone agg) exc 10 cm in width and setting in mortar 1:4with minimum compressive strength of 5N/ sq mm complete all as specified and as directed. 74 M&L for providing and fixing Gypsum Board 12mm thick in walls fixed with screw as per manufacturer’s instructions complete all as specified. 75 Dismantling in Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified. 76 M & L Anodised aluminium snap grid frame work (size of grid 605x 605) mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified and as directed. 77 M&L for providing and fixing Exposed metal frame ceiling with fire resistant calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) fixed with screw as per manufacturer’s instructions complete all as specified. 78 Cleaning (mechanically)of sewage line/effluent drains 150/110 mm dia and disposing offthe sludge outside MoD land complete all as directed. 79 Removing the chokes in drains of WC/bath room/kitchen up to 1st manhole including cleaning of gully traps in single storey/ground floor of multi storeyed buildings, all as specified and directed. 80 Removing chokes in drains of WC/bath room/kitchen other than ground floor all as specified and directed. 81 Destruction of growth of weed plants with roots level on wall/ roof of building any height with weedicides such as Round up manufactured by Excel Chemical Industries and sprayed in and around roots and the place of possible growth of weeds as per manufacturer’sinstructions and making good the surfacescomplete all as specifiedand as directed. 82 Demolition of reinforced cement concrete in any position not otherwise specifically provided for 83 M& L for Precast RCC Cover slabs type B-1, 1:2:4 (20 mm graded stone aggregate as in slabs of drains including necessary form works. (Reinforcement bar will be measuredand paid separately). 84 M&L TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips 85 Demolition of cement concrete in any position not otherwise specifically provided for complete all as specified and directed. 86 M & L for 1:3:6 Type C-2 (using 40 mm graded stone aggregate) for surface channels anddrains all as specified 87 Extra for forming fair finished drain or channel 30 Cminner girth in cement concrete ,using extra cement, including forms, moulds, mitered /stopped endsetc 88 Opening manhole of septic tank remove night soil and sediments including liquid by mechanical pumping into tanker lorry having cleaning internal surface with water and re-fix the manhole covers, complete all as specified and directed. Notes :-(i)Volume of the manhole will be worked out based on the depth or actual depth of sludge, whichever is less.(ii) Water shall be procured by the contractor for cleaning purpose. 89 Demolition of cement concretein ground floors and pavings n.exc 15 cm thickness (below or above ground level) 90 M&L for 100mm thick PCC ( 1:3:6)type C-2,using 40mm graded stone aggregate as in hard standing/path/sub basefinished to an even and fair surfaces. 91 M&L forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade A. 92 Dismantling structural steel work incl doors, gates but excluding framed trusses. 93 S & FMS work in railings, balusters, posts and struts in fencing etc including cutting tops to shapeas directed, includingall necessary welding, drilling bolting or riveting etc and similar work conforming to FE 290 Gd E-165 complete all as specified 94 S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging with and including hooks and hinges, also fastening and fixing complete conforming to Fe-410W (Gde-E-250) 95 M&L for Point wiring for light point /fan point/Exhaust fan /Bell Pointwith 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate and cover with GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. including dismantling /removing of burnt cable/making good surface asrequired . 96 M&L for submain wiring for 5 Amp socket outlet point on independent board with 2x 1.5 sqmm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with multi standard copper conductors and earth continuity wire with similar 1x1.5 sqmm cable (incl connecting to earth dolly) drawn through and single core cable in surface/recessed medium class PVC conduit including dismantling /removing of burnt cable/making good surface as persiterequirement . 97 Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular switch and 5/6A modular socket ,connection etc. as required atsitecomplete all as specified and directed (for Independent 5 Amp socket ) . 98 M&L for wiring for circuit along with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit as required .wire 2x22.5 sq.mm + 1x2.5 sq.mm earth wire for 15/25 power plug/socket. 99 All as per item above but Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 A modular switch and 15/16A modularsocket ,connection etc. as required atsitecomplete all as specified and directed( for 15/16 Amp Socket ). 100 M&L for wiring for circuit along with 4 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface /recessed steel conduit as required .wire 2x4 sq.mm + 1x4 sq.mm earth wire (for Ac & Geyser ) 101 S&F Electronic ceiling fan regulator, modular type stepped /socket type heavy duty suitable to work on 230 volts complete all as specified and directed. 102 Supply & Fixing piano type 5/6 amps switch on the existing Switch box including connection as required on site. 103 Supply & Fixing piano type 2 way 5/6 amps switch on the existing Switch box including connection as required on site. 104 Supply & Fixing piano type 15/16 amps switch on the existing Switch box including connection as required on site. 105 Supply & Fixing piano type 3 pin 5/6 amps socket outlet switch on the existing Switch box including connection as required on site. 106 Supply & Fixing piano type 6 pin 15/16 amps socket outlet switch on the existing Switch box including connection as required on site. 107 Supply & Fixing 5/6 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 108 Supply & Fixing 15/25 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 109 Supply & Fixing 3 pin 5/6 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 110 Supply & Fixing 6 pin 15/25 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 111 Supply & Fixing modular bell push on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 112 Supply and fixing 1 or 2 module base & cover plate on existing modular metal boxes etc as required. 113 Supply and fixing 3 module base & cover plate on existing modular metal boxes etc as required. 114 Supply and fixing 4 module base & cover plate on existing modular metal boxes etc as required. 115 Supply and fixing 6 module base & cover plate on existing modular metal boxes etc as required. 116 Supply and fixing 8 module base & cover plate on existing modular metal boxes etc as required. 117 Supply and fixing LED light fitting 1X20W,220V high efficiency(efficiency up to 100lm/w) polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-20-30/40/65-SL-DP-NWHor GM/ Panasonic/Havells etc. 118 Supply and fixing LED light fitting 1X10W,220V high efficiency(efficiency up to 100lm/w)polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-10-30/40/65-SL-DP-NWH or Havells /Panasonic/GM etc. 119 S & F in repairs LED 20W T8 Tube within built driver and efficiency of 100lm/w having glare free lighting distribution, double sided connection, housing made of high grade polycarbonate cover, 2.5 KV internal surge protection, IP20 ingress protection, PCB mounted on extruded metal plate. Make: Crompton model No LT8-20-865-(2) or equivalent in Havells/C&S/ Phillips/Bajaj. 120 S&F switch socket combination 5 Amp with PVC box suitable for 230 Volt on surface. 121 S&F switch socket combination 15 Amp with PVC box suitable for 230 Volt in surface 122 M&L switch socket combination2 in 1, 6/16 Amp flush type in existing switch box. 123 All as per item above but 6 Amp flush type in existing switch box. 124 M&L forbell AC 230 V Single pole ding dong type. 125 Supply and fixing angular type batten holder insulator body of PVC/ polycarbonate type suitable for 10/9 W Led bulb. 126 Supply and fixing fan condenser / capacitor of size 2.25/2.5 suitable for ceiling fan of any sweep. 127 Supply and fixingonly LED lamp of 9 watt, Make : Crompton/ Havells /Panasonic 128 S&F of 20 Amps 240 V , SPN Industrial type socket outlet, with 2 pole and earth ,metal enclosed plug top along with 20 A C Curve ,SP MCB , in sheet steel enclosure ,on surface or in recess with chained metal cover for the socket outlet and complete with connections ,testing and commissioning etc. as required . 129 Supplying and fixing 6 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 130 Supplying and fixing 8 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB / RCCB/Isolator) 131 Supplying and fixing 4 way, Horizontal type , Three pole and neutral Dl sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 132 Supply and fixing of 5A to 32 A rating, 240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole in the existing MCB DB Complete with connections, testing and commissioning etc ax required. 133 Supply and fixing of 5A to 32 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc ax required. 134 Supply and fixing of 63 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of Triplepole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc as required. Make: IndoAsain, HSN Code: 8536, Cat. Nos.: 810107 or equivalent make of LT/ Havells. 135 M & L LED Square surface mounted Led Panel 12w, PDC housing and high translucent frosted plastic diffuser makes it a robust Luminar and efficiency up to 100lm/w. Make: Crompton, Model no LCDSPLN-R-12-CDL or equivalent make of GM/Havells. 136 M & L LED Round and Square recess mounted 12w LED edge lit slim down light with die cast aluminium housing finished in premium white coating and efficacy up to 100lm/w suitable for false ceiling. Make Crompton, Model no LSCRM-12W-WW/NW/ CDL or equivalent make of GM/Havells. 137 Dismantling and taking down ceiling fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying and re fixing the same in position, connecting and testingall as specified and directed. 138 M & L for carry out rewinding of ceiling fan motor of any size/ make including taking down from any height ,dismantling ceiling fan motor , removing old burnt winding wire, cleaning the armature thoroughly and replacing the same with new enameled copper wire of adequate size/gauge including class B insulation, varnishing heating etc, reassembling and removing the old painting and providing newpainting to ceiling fanscompletewith synthetic enamel Grey paintby spraying using machine including filling cavities with filler one coat after cleaning all dust making the surface in good finishes etc , testing, re-fixing the same in original position complete all as specified and as directed by the Engineer - in - Charge.Note: Rate include the taking down the ceiling fan and deposited to MES store for checkingand repairing) 139 All as per Item above but for the Exhaust fan of 300 /450 mm sweep sizes: 140 S & F in repairs of LED 36W surface full lit luminaire with glare free uniform illumination with longer life and less maintenance available in 2x2 ft (> 100 lm/w).Make: Crompton, Model No LCTLSNE-36-FO-WW/TL/CDL or Havells /C&S/ Phillips/Bajaj. 141 Supply andLayingGI tubing medium grade of size 50 mm with and including all fittings such as bends, elbows, tees, short pieces etc complete in trenches of following sizes after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. Note- Excavation & earth work will be measured & paid separately. 142 All as per item above but 40 mm bore 143 All as per item above but 25 mm bore 144 Supply & Fixing of Size 50 mm GI tubing medium grade withand including all fittings such as bends, elbows, tees, short pieces etc complete on wall and ceiling or laid in floors after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. 145 All as per item No 4 above but 40 mm bore 146 All as per item No 4 above but 25 mm bore 147 All as per item No 4 above but 20 mm bore 148 Repairs to leakage /damaged G.I. pipe of size 50/40 mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples ,Bends etc. all asdirected by Engr- in- charge. Note:- G.I. pipe length will be measured and paid separately under relevant item of sch A 149 All as per item above but 25/20 mm bore 150 Supply and fix in repairs gun metal gate valve of size 50 mm ISI marked with iron wheel head screwed both ends all as directed. 151 All as per item above but 40 mm bore 152 All as per item above but 25 mm bore 153 All as per item above but 20 mm bore 154 All as per item above but 15 mm bore 155 S&F in repairs un plasticized PVC pipe, 25mm bore of pressure rating 10 Kg/ Sqcm with all fittings, fixed to walls, ceilings or in floors complete with snap clips hooks etc and taking out old unserviceable one all as specified an as directed 156 All as per item above butof size 20 mm bore dia 157 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil forlaying/taking out GI pipe line all as specified and directed. 158 Returning filling in including spreadingleveling watering and well rammingin layer not exceeding 25 cm in soft/loose soil all as specified and directed. 159 Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mabove the starting point all as specified and directed. 160 M & L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside of the RCC Under Ground Sump of10,000 Ltrscapacity by dewatering the sump and cleaning the complete inner surfaces by rubbing / scrapping by wire brush to removethe sludge, washing with bleaching powder solution and then with water and draining out sludge, water completely including applying one coat of white wash to all the inner surfaces, and details of tanks like date of cleaning ,capacity of tanks etc shall be written on the outside of the tank with synthetic enamel paint with lettersize 20 cm high in white color , over a black backgroundof size 100x60 cmand charges included for pump set for de watering incl operator all as specified anddirected 161 M&L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside PVC Service tanks kept on roof top of buildings or on stagings, cleaning the surface using brush and other cleaning materials such as bleaching powder as required including writing the capacity of the tank and date of cleaning with white enamel paint over black back ground all as specified and directed for the following capacity of tanks at different locations on Technical/Residential Buildings all as specified and directed by Engr-in-Charge. 162 2000 Ltr capacity 163 1000 Ltr Capacity 164 500/300 Ltr capacity 165 S&F in repairs float Valve 40mm bore (Ball brass valves) high pressure type with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and taking out old unserviceable one all as specified and directed 166 All as per item above but of size 25mm bore 167 All as per item above but of size 20mm bore 168 S&F in repair/replacement HDPE Tank cover suitable for 300 to 1000 Litr capacity and taking out old unserviceable one 169 All as per item above but for 2000Ltr capacity tanks 170 M&L for repair/replacement ofFoot valve of size 50mmbrass heavy duty including taking up the suction pipe and re-fixing the same after replacement of foot valve in to the sump for proper functioning of pump and taking out old unserviceable one all as specified and directed 171 Dismantling of Mono-block Pump set from the existing position for servicing including opening the pump replacing the unserviceable ball bearings of suitable size for capacities up to 5 HP including greasing complete all as specified and directed 172 Repairs and servicing of Electric chlorine dozing Pump/ system Make Sathya sai Aqua Pura Services with Ant siphon valve including servicing of pump and motor with repair/ replacement of unserviceable parts like piston, stroke controller, suction and delivery tubing, PVC foot valve, nozzle, solution tank inlet, PVC water tubing 15mmbore, gate valve 15mm size etc, complete all as specified and directed. 173 M&L for cleaning of pump sets starter panel after dismantling the incoming and outgoing connections from MCCBs /MCBs and replacing the old unserviceable gland, lugs, nuts &bolts, push buttons, indicating lamps, supporting insulators etc, and checking the serviceability of MCBs cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed 174 M&L for Replacement of unserviceable DOL Starter suitable for motor up to 5 HPincluding connections 175 M&L for Repairing the old Valve pit of dimension 60x45x45 cm by taking out plaster and rendering with 10mm thick CM(1:4) including PCC (1:3:6) TYPE C2 on base, brick work inCM (1:4) as required and applying two coats of white wash on plastered surface including applying two coats of synthetic enamel paint over one coat of red oxide primer over steel surfaces after preparation, complete all as specified and directed 176 M&L for painting pump set including preparation old surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer including marking the signs, letters, Nos on the pump setof capacity up to 2HP all as specified and as directed. 177 M&L for painting of old painted GI pipe of any size on the external surfaces after preparation, located in and out of Pump House, by scrapping and cleaning of external surfaces and applying two coats of Sky Blue paint over a coat of red oxide primer complete all as specified and directed. 178 Dismantling , taking out complete burnt winding wire of submersible motor including cleaning of statorslots replacement of defective parts and rewinding with existing type & gauge ofcopper wireas per motor capacity and using new insulation material such as insulating paper sleeves etc. replacement of submersible cable as required length complete all as directed of rating 1.5/2HP Single phase 179 Repairs to leakage /damaged G.I. pipe of size 80 to 100mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples, Bends etc. all asdirected by Engr- in- charge. Note:- (i) G.I. pipe length will be measured and paid separately under relevant item of sch A 180 Material Labour for fixing Mechanical joint suitable 80 mm dia GI pipe, fabricated and made out of MS sheet of thickness 6/8 mm including welding work, rubber gasket, nuts, bolts and washers complete all as specified and directed by Engr in charge. 181 Comprehensive Maintenance, Servicing and carrying out periodical service to DG set along with AMF panel or standard panel like carry out oil service and routine checkup/maintenance as per manufacturers schedule, checking complete system of lubrication, cooling systems, air intake systems, fuel systems, exhaust systems, DC/AC electrical systems in DG Set as well as in AMF/Standard Panel, tightening bolts and nuts in engine and alternator related systems, etc and repairs including material for renewal/ replacement of minor defective parts of like connectors, MCBs , phase indication lamps etc for following capacity of DG sets all as specified and directed by Engr in charge. 182 35 KVA with AMF Panel installed at 14 ASC, AF Kakkanad 183 20 KVA with AMF Panel installed at 14 ASC 184 Note:The spares to DG Sets items as listed below as SUPPLY ONLY will be used whenever required only and it shall measured and paid separately under respective items. 185 The rate is inclusive of all items as required at site except those items as SUPPLY ONLY below to keep the DG Set along with AMF / Standard panel on monthly basis complete all as specified and as directed by Engr-in-Charge. 186 The contractor should attend any complaint / breakdown immediately on call basis and even no. of times without any extra cost. 187 Contractor should submit the inspection / maintenance report of every visit in spite of no of visits during breakdown calls including mentioning the status of DG Sets and spares any replaced 188 The old unserviceable spares replaced under comprehensive maintenance i.e. in sl No 02 of above BOQ is the property of contractor for which credit shall be deducted under respective items in schedule of credit. 189 All AMF panels and standard DG set panels should be well cleaned with CTC solution checking all the electrical connection and tighten for any loose connection. 190 Supply and replace of heavy duty diesel engine oil of 20W40 grade for DG Sets having capacities varying from 15 KVA to 35 KVA complete all as specified and as directed. 191 Supply only Lub Oil Filter for DG set 15 KVA to 35 KVA 192 Supply only fuel filter forDG set 15 KVA to 35 KVA 193 Supply only Oil pressure gauge for DG set of any size/make 194 Recharging of Battery 12 Volts , up to180 AH any make / type by replacing electrolyte including replacement of unserviceable terminal posts , to the required standard complete all as specified andas directed . 195 Diesel hose of size 5/16 all as directed 196 Battery terminals one end socket and the other end clamp type including brazing work and applying jelly over the battery terminal and pole all as directed by the Engr in charge 197 Water hoses complete set of engineDG sets of cap 15 to 35 KVA 198 Repairs to 12 V self starter of DG set engine by dismantling, removing and replacing the old defective/worn-out bearings, servicing including replacement of carbon brush, bendix drive, cleaning commutator in armature etc assembling and testing for satisfactory function all as directed. 199 Supply only auxiliary contactor suitable for AMF panel of 15 to 35 KVA DG set 200 Supply only power contactor suitable for AMF Panel of 15 to 35 KVA DG set 201 Supply, install, testing & commissioning in repairs DC relay card/ PLA relay 12/24 volt DC for DG set any capacity including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed by Engr-in Charge, 202 Supply and mixing water coolant in radiator water of DG Sets having capacities varying from 15 KVA to 320 KVA complete all as specified and as directed. 203 Repairs to door of acoustic enclosure of DG set cap 20 KVA by taking down and replacing the door hinges and door lock including all M&L and as directed. 204 Supply only distilled water into battery capacity of 12/24 Volt 88/90/180 AH all as specified and as directed by Engineer-in-Charge. 205 Taking out old burnt out Automatic voltage regulator from DG setcapacity 15 KVA to 35 KVA alternator and replace with new AVR and includingtesting and checking voltage regulation ofthe DG set on full loadfor its satisfactory performance complete all as specified and directed by Engineer-in-Charge:- 206 M&L for dismantling of complete radiator assy for DG Set capacity 15KVA to 35 KVA from engine and taking out all, de scaling rusty, sludge and muddy particles inside the radiator by using of sodium hydroxide with water pressure cleaning complete, changing of radiator fan belt if required and re-fixing the radiator assy on its existing position and testing complete for its satisfactory performance with entire satisfaction of Engineer-in-Charge:- 207 M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm buried directly in ground level with top edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanized iron strip 25mm x 4mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire babric (APM) weight not less than 4 Kg/ Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and as directed by Engr-in-Charge. 208 Providing and fixing 25mm x 5mm G.I strip in 40 mm Dia G.I pipe from earth electrode including connection with G.I Nut, bolt, Spring, Waher excavation and refilling etc. as required. 209 Supply & Fix in replacement MCB SP 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 210 Supply & Fix in replacement MCB SPN 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 211 Supply & Fix in replacement MCB TPN, 40 -63 Amp, C-curve, 415 volt AC complete all as specified. 212 Supply & Fix in replacement AMF controller, three phases, 50 Hz, AC, auto/manual/test/off mode with necessary display complete all as specified. 213 Material & Labour for dismantling the alternator of DG Set of capacity 20 KVA to 75KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connection of the alternator, shifting the alternator to workshop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the “F” class insulation and existing gauge and type of magnet wire which was on original motor, varnishing, heating, drying, greasing the bearing including replacement unserviceable bearing ,re-fixing the complete including connection to the terminal box of the alternator at workshop and shifting the same to the site, fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with engine connecting all electrical connection of the alternator and testing the DG set “OFF/ FULL LOAD” , matching to the existing range of RPM of the engine output voltage for 415 volt and testing complete all as per the direction of Engineer In Charge. 214 Material & Labour for taking down unserviceable heat insulation from exhaust piping and providing new heat insulation to exhaust pipe using 50 mm thick mineral wool inside the container & up to the exhaust stack. The insulation shall be cladded/ covered with 24G aluminium sheet. Pipe length shall be maximum up to12 Meter long from engineincluding necessary welding works, cladding works with wire mesh and aluminium foil, replace unserviceable supporting MC,angle iron 50 mm X 50 mm X 6 mm, suitable size flange, nut, bolt and washers as required includingweather cowl complete all as specified. 215 Material & Labour for dismantling carefully fuel injection pump (FIP) up to 6 cylinders engine of DG set and transporting to workshop, opening into parts, for maintenance, servicing, overhauling, tuning and calibration, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-assembling, re-fixing the FIP on its original position including to and from conveyance charge from site to workshop and back complete all as specified. 216 Material & Labour for dismantling exhaust manifold from the engine to detect the smoke leak, clean the manifold including welding works, replacement of unserviceable spares, packing, bellows, nut, bolt, washers, insulators, etc. reassembling and re-fixing on its base, testing by running the DG set No LOAD/FULL LOAD complete all as specified. 217 S&F in repair 1.5 Sqmm three core PVC insulated, unsheathed multi stranded copper conductor flexible cable 1100 volts grade complete all as specified and directed by Engr in Charge. 218 M&L for preparation of old paintedsurfaces of the DG set and fuel tankof following capacity by cleaning oily and greasy spots using CTC and material and labour for one coat of synthetic enamel paint using spray machine to the fuel tank and one coat of heat resistance paint to Engine / alternator complete all as specified and directed. 219 Note: - Colour code to be followed as under:-(i) Engine body - OG.(ii) Alternator - Siemens grey(iii) Fly wheel guard - Red(iv)Radiator -Black(iv)DG set canopy/complete body with two coats of superior qualitysynthetic enamel paint using spray gun (Area of painting not exceeding 3 sqm) including writingof incoming/outgoing feeder with letters, MES/SM Nos etc completeall as specified. For DG Set capacity 15 KVA to 35 KVA 220 M&L for disconnection of Diesel Oil tank with inlet and outlet diesel pipe line hose/pipe and cleaning of complete oil tank and drain out slug, muddy oil particle complete and re-fixing after at the same place and connecting complete with existing system including marking of tank showing the capacity in Ltrs and replacement of transparent PVC pipe complete all as directed by Engineer-in-Charge:-For DG Set capacity15KVA to 35KVA 221 Supply, install, testing & commissioning in repairs controller- Procom DGC-6D Auto Mains failure control Module including Display, replacing contactors/Connectors and making all electrical connections good and renewed for up to DG set 35 KVA as per existing make complete all as specified and directed by Engr-in-charge. 222 M & L for Servicing of split type Air-conditioning unit comprising Indoor and Outdoor unit of any make/type having capacity 1.0/1.5/2 TR including attending breakdown including required tools and plants,minor electrical sparer like small piece of wire, insulation tape , screws required to rectify the complaints by replacing the spare partsin technical andresidentialbuildingat 14 ASC Kakkanad. Note: Spares required is measured and paid as respective items in Schedule A and all specified and directed by the Engineer - In - Charge. 223 Supply and charge refrigerant gas R-32/R-410 at site including testing all as specified and as directed by Engineer in charge . 224 Supply only Capacitor 36/40 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 225 Supply only Capacitor 50/60 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 226 Supply only Capacitor 80/100MFD suitable for 230 V 50 HZ AC supplyall as specified and as directed by Engineer in charge . Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 227 Taking out existing burnt fan motor single phase 230 Voltfrom the unit at site by carefully dismantling the same, taking out burnt copper winding and rewinding the same with super enameled copper winding wire of appropriate size and gauge, including replacement of defective bearing and bushes of existing size and standard make including varnishing to copper winding re-assembling the motor and testing the motor at medium and full load complete for the followingall as specified and as directed by Engineer - in - Charge. 228 Splittype AC capacity up to 1.5 Ton 229 Split type AC 2.0 Ton Capacity 230 Taking out old unserviceable PCB and replace the same with new PCB at site suitable for window/split type AC of capacity 1/1.5/2 TR all as specified and directed by Engg-in-charge 231 Taking out carefully existing defective sealed unit compressorSupply & fixing factory made rotary type sealed compressor unit same as per existing model and make including charging the gas and testing & commissioning under normal condition of following rating complete all as specified and directed by Engineer - in - Charge. 232 (a) Split type Ac 1.5/2.0 Ton capacity 233 Removing the damaged insulation of suction and discharge line & Supplying and fixing new Thermal sleeve insulation for suction line and discharge line including providing hard plastic tape over the thermal insulation of split type A/C 1.5 / 2.0 Ton capacity etc complete all as directed by Engineer - in - Charge. 234 M&L in replacement of old unserviceable remote by providing new remote suitable for window type/ split type AC of any capacity/any make as specified and directed by Engineer in Charge. 235 Supply only new capacitor of Fan motor of 4 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 236 Supply only new capacitor of Fan motor of 10 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 237 Suply only split type AC indoor unit oscillation motorcomplete all as directed by Engineer - in - Charge. 238 Supply only thermostat for split type AC 1.0/1.5/2.0 complete all as directed by Engineer - in - Charge. Make: INDFOSS / RANTROL / ANNAPURNA. 239 Supply & fix in replacement of factory made MS bracket or Stand duly painted suitable for outdoor unit of split AC including making good disturbed surfaces etc. , all as specified andas directed. 240 M & L Removing the split A/c unit from existing position, of capacity 1.5/2.0 Ton of any make and refix the same in other location by fixing the indoor and outdoor unit in position on fixing on wall/ floor as directed including piping refix the insulation, Gas charging filling the cavities on wall setting of grills alignment complete including, testing & commissioning to the entire satisfaction of Engineer - in - Charge. 241 Supply and fixreplacement 240V 20 Amp singlepole and earth enclosure with a two pin and earth plug and socket complete with one single poleMCB20 Amp SPAll as directedEIC .Make: Legrand , Cat No: 6078 41/Equivalent in L & T/Indo Asian. 242 Taking down the old sub main wiring and M/L for new sub main wiring with 2 run single core 4.0 sq mmPVC unsheathed copper multi stranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow, saddles etc of white/lvorycolour PVC conduit including multi stranded copper earth conductor 4.0 sq mm one run as earth continuity conductor all as directed by Engineer in Charge. 243 Supply and fixing in replacement of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make: Havells Cat Part No ENDURAPEARLNEOSL45LED757PASYTOPC or its equivalent make of Crompton/Bajaj/HPL/GM. 244 Supply, fixing, connecting and testing in replacement of 150 Watt LED flood light 230 Volt AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Havells Cat No JETAIRISFLS150WLED757PSYMLTG or its equivalent make of Crompton/GM/HPL. 245 Supply and fixing in replacement to ground with suitable pole mounting with OD of 76 mm, connecting and testing 40 Watt LED Post Top Luminaire, 230 Volt AC outdoor type with decorative post top for 360° indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Crompton Cat Part No LPTO-40-CDL/M or its equivalent make of Havells/Bajaj/GM/HPL. 246 Supply and fixing passing through pole cable 3 core PVC insulated unsheathed multi stranded copper conductor of size 2.5 Sqmm from junction box to lightfitting all as directed by EIC. Make: Havells/Finolex/Poly cab. 247 Supply & fixing in replacement of transparent cover type street light junction box of size 168 mm x 253 mm x 115 mm made of high quality thermoplastic type with hinged and 4 Nos DIN mounted terminal suitable for 10 Sqmm XLPE cable, IP-66 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of poly-urethane with copper bus bar 25 x 5 mm -04 strip, one noMCB SP 6 Amps with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to, 10Sqmm cable etc and fixing to the street light pole with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed. Make: Hensel Cat Part No KG 9002 or its equivalent make. 248 M & L for removal of existing treatment from PCC poles and applying two coats of weather proof exterior emulsion paint on old painted surface over a coat of primer, complete all as specified and directed by Engineer-in-Charge. 249 M&L for cleaning of feeder pillar/ panel after dismantling the Incoming and outgoing connections from MCBs and replacing the old unserviceable Gland, lugs, nuts & bolts, push buttons, indicating lamps, supporting insulators etc., and checking the serviceability of MCBs, cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed by Engineer-in-Charge.Note: Spares / materials charge for repair/replacement of worn-out parts shall be measured and paid separately under relevant items. 250 S & F in replacement of MCCB 4 Pole 100-125 Amps 415V 16 KA 251 S & F in replacement of MCB TPN63Amp, 4 Pole, C Curve 252 S & F in replacement of MCB DP 32-40Amp, C Curve 253 S & F in replacement of MCB SP 6 to 32Amp, C Curve 254 Comprehensive Maintenance, Servicing and carrying out periodical service to Voltage Stabilizer, servo type of capacity 63 KVA, 3 phase, 50 c/s, AC including along withrepairing/ replacing of all defective parts such as nut-bolts, washers and all other minor accessories as required at siteall as specified and directed by Engr in charge. Notes: 255 (a) Any additional parts required to be replaced will be measured and paid separately as Supply only against appropriate item of schedule. However labour element and painting involved in replacement are included in quoted rate against this item. 256 (b) Any minor repairs involved to make the voltage stabilizer functional if notified by the Engr-in-Charge shall be carried out by the contractor without any extra cost to the department. (c) Following parts (if renewed) shall be measured and paid separately under appropriate items at Supply only rates and unserviceable parts retrieved through replacement shall be measured under Sch of credit. 257 Disconnecting the complete unit of Servo Controlled voltage stabilizer of capacity 63 KVA, 3 phase, 50 c/s, AC supply of Make- Volteck or as per existing make and overhauling of the same by cleaning, servicing all serviceable accessories including painting with two coats of synthetic enameled paint externally after rubbing of old loose paint along with writing SM No. and capacity on the face of stabilizer and making all connections at both ends including providing lugs on existing cable and testing on full load after completion of repair / overhauling work complete all as specified and directed.NOTE: - (i) Supply only spare parts shall be measured and paid separately under relevant items of this schedule. (ii)Transportation charge / labour charge during the repair of voltage stabilizer from the site to workshop are included in the items of this schedule 258 Supply only following spare parts of 63KVA capacity Servo Voltage Stabilizer complete all as specified and directed: - 259 AC synchronous motor single phase, 50 Hz, 240 volts Make:UNI STEP or equivalent make suitable for volteck servo . 260 Variable auto transformer (Variac). 261 Sensing Transformer. 262 Carbon brush with holder complete. 263 Solid state sensing circuit. 264 RC Net work. 265 PCB connector. 266 Gear big. 267 Carbon fingers. 268 Variac Control CT. 269 Main Bushing with brass rod (insulator & rod). 270 High low cut off relay. 271 Series transformer. 272 Wiring Set. 273 Gear small. 274 Transformers oil filtering with test 275 Replacement of electronic control board 276 Fixing of top cover after repair and testing up to entire satisfaction of Engr in Charge. 277 Supply, installation, testing and commissioning of street light timer control panel, on pole/wall/floor mounting made out of CRCA steel sheet duly powder coated with locking arrangement, including internal wiring complete with bypass arrangements as per manufactures recommendation and design complete all as specified and as directed.Make: Havells Cat Part No IHXTS09120 or its equivalent make of above specification. 278 S&F bracket for fixing to street light poles, made out of suitable dia for fitting of LED street light fittingsmedium grade GI pipe bend to shape inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paintall as directed by the Engineer-in- Charge. Make: TATA / Jindal / Surya Praksh. 279 Supply, install, test and commissioning of outdoor type double door LT Feeder pillar box made out of 3.15 mm thick CRCA sheet outdoor type totally enclosed weather dust and vermin proof as per IS , CPRI Approved with front opening suitable locking arrangement having copper bus bar of 300 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary PCC 1:3:6 in foundation and made out of 50 mm x 50 mm x 6 mm angle iron grouted at ground above 30 cm from ground level comprising of the following etc complete all as specified and directed by Engineer-in-Charge. Note: Cost of necessary internal wiring from bus bar to MCCBs/MCBs/Enclosure connections etc shall be deemed to be included in the unit rate. 280 Incoming:(a) MCCB 200 Amp 4 pole 36 KA Ics=100% of Icu with spreader & rom -01 No. (b) Indication Lamp Red/Yellow - 03 No (c) SP MCB 6A -03 Nos (d) MFM Meter with CT- 01 No (g) Provision for installation of KESB 3 Phase meter with necessary accessories. 281 Outgoings.(a) 125 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (b) 100 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (c) 63 A 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No.(d) 32 Amp 4 MCCB 16 KA, Ics=100% of Ics with spreader & rom -01 No. 282 M & L for re-filling of chemicals (minimum 25-30 ltrof Bentonite chemical / Graphite compound for each earth pit) in existing chemical earthing at technical area for achieving satisfactory earthing value with comprising of the Bentonitecomponents including necessary excavation/drilling for lift of cylindrical copper tubes from the ground and re-fixing the same by using Rig machine and providingenclosure with heavy duty plastic cover having locking arrangement including changing of electrode with pure copper chemical earthing electrode (length ofRod : 3 mtr Approx) for excellent conductivity & work efficiencycomplete all as specified and as directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 9
Kerala View Result →
6.
Water Resources and Irrigation #10558790 Price Bid
Supplying, Installation, Testing & Commissioning of Mix-flow type Electric Pump Sets & equipments with all accessories etc. including development of Substation for New Pump House at Jahangirpuri drain near Gopalpur Regulator RD-1135m.- 1 Supplying, installation, testing and commissioning of totally enclosed fan cooled squirrel cage 3-Phase induction motor confirming to protection IP 55 Horizontal foot mounted suitable for open duct on 415+/- 10%, 3-Phase 50HZ +/- 5% AC supply with Ambient 50°C class F insulation 55 KW/75 HP , 6 Pole , 980 RPM with performance standard confirming to IS 12615 coupled with suitable size standard Coupling to MF 35x35 Size Pump set having 1400 m3/hr discharge at 10 mtr head and CI casing, SS Impeller, SS shaft, SS shaft sleeve with Gland packed shaft sealing complete with all standard accessories mounted on frame of suitable size with complete grouting or mounted on suitable cushyfoot vibration mounting pad completed etc. as required at site(Motor Make:- Kirloskar/Crompton/ A.B.B./ Siemens) (Pump Make:- Kirloskar/ Wilo/ Flowmore/KSB) 2 Supplying, installation, testing and commissioning of totally enclosed fan cooled squirrel cage 3-Phase induction motor confirming to protection IP 55 Horizontal foot mounted suitable for open duct on 415+/- 10%, 3-Phase 50HZ +/- 5% AC supply with Ambient 50°C class F insulation 75 KW/100 HP , 8 Pole , 740 RPM with performance standard confirming to IS 12615 coupled with suitable size standard Coupling to MF 40x45 Size Pump set having 2000 m3/hr discharge at 10 mtr head and CI casing, SS Impeller, SS shaft, SS shaft sleeve with Gland packed shaft sealing complete with all standard accessories mounted on frame of suitable size with complete grouting or mounted on suitable cushyfoot vibration mounting pad completed etc. as required at site(Motor Make:- Kirloskar/Crompton/ A.B.B./ Siemens) (Pump Make:- Kirloskar/ Wilo/ Flowmore/KSB) 3 Supplying , installation, testing and commissioning of Sound Proof Steel enclosure Water Cooled Engine coupled with Alternator 320KVA/256 KW silent DG Generator set including Base frame, Radiator/Heat Exchanger/Fuel Tank/ Control Panel /AMF panel, fuel piping foundation, all interconnections, loop Earthing, Silencer completed all as per CPWD/CPCB norms with standard accessories etc. as required.(Make:- Crompton Greaves/ Kirloskar/ Cummins or as approved by Engineer-in-charge) 4 M.S. Pipes:-Manufacturing , Supplying, erection & commissioning of Mild Steel ERW, (Electric Resistance welded) Pipe fabricated/manufactured out of Fe410 Mild Steel Grade 330 as per IS: 3589 of reputed & approved make , including painting with epoxy paint inside and outside surface with two coats of anticorrosive paint of approved brand and manufacture : all conforming to relevant IS codes: complete in all respect and with upto date amendments in relevant IS codes:(Pipe make:- Jindal/ Surya/ Tata or as approved by Engineer-in-charge)1200mm nominal dia pipes of 12mm thick complete as required at site. 5 350mm nominal dia pipes of 8mm thick complete as required at site. 6 400mm nominal dia pipes of 8mm thick complete as required at site. 7 450mm nominal dia pipes of 8mm thick complete as required at site. 8 MS Flanges:- Manufacturing, Supplying, fixing & welding of following sizes M.S. Flanges etc complete. as requiredat site. 1200mm dia. & 25mm thickness. 9 350mm dia. & 20mm thickness. 10 400mm dia. & 20mm thickness. 11 450mm dia. & 20mm thickness. 12 MS Bends:-Manufacturing, Supplying, fixing & welding of following sizes M.S. Bends etc. complete. as requiredat site. 1200mm dia. 13 350mm dia. 14 400mm dia. 15 450mm dia. 16 MS Dummy Flanges:-Manufacturing, Supplying & fixing of M.S. Dummy Flanges etc. of following sizes complete as required at site. 1200mm dia. & 25mm thickness. 17 350mm dia. & 16mm thickness. 18 400mm dia. & 25mm thickness. 19 C.I. Sluice Valves:-Providing & Fixing of following sizes Cast Iron Sluice gate Valve suitable for Pressure 1.0 PN complete in all respects as required at site. (Make: - Kirloskar/Kartar/Sant or as approved by Engineer-in-charge)350 mm nominal dia. 20 450 mm nominal dia. 21 C.I. Non Return Valves :-Providing & Fixing of following sizes Cast Iron Non Return Valve suitable for Pressure 1.0 PN complete in all respects as required at site. (Make: - Kirloskar/Kartar/Sant or as approved by Engineer-in-charge)350 mm nominal dia. 22 400 mm nominal dia. 23 Nut/Bolts/Washers:-Manufacturing & Supplying of Nuts,Bolts & Washers etc. of size 7/8 x 6 as required at site. 24 Rubber Gaskets:-Manufacturing, Supplying & Fixingof Rubber Gaskets of thickness 6mm or more for following sizes M.S. Pipelines Flanges as required at site.1200mm nominal dia. 25 350mm nominal dia. 26 400mm nominal dia. 27 450mm nominal dia. 28 Vaccum Pump:-Supplying, Installation, Testing and Commissioning of DV-50 Vaccum Pump sets having C.I. casing and C-40 shaft with 10 H.P. energy efficiency LV motor, 3 phase, 415volt 50hz, 1500RPM +/- 5%, TEFC induction motor mounted on suitable size M.S.base frame coupled on existing foundation withall accessories like ML 1.5 starter, anti vibration mounting pad, coupling, nut-bolts & packing etc. complete in all respect i/c providing, fitting & testing ofheavy class M.S. pipe of 50mm dia.of requiredlength with necessary Gate valve and mountings etc.for chargingof pump sets. ( Pump:- Kirloskar make or as approved by Engineer-in-charge) (Motor:- Kirloskar/Crompton /ABB or as approved by Engineer-in-charge) (Pipe make:- Jindal/ Surya/ Tata or as approved by Engineer-in-charge) 29 Supplying, installation, testing & commissioning of Energy efficient 630 KVA, 11/0.433 KV, 3 phase, 50Hz, Dyn11, outdoor ONAN type, copper wound Transformer with off load tap changing arrangement on HV side , Tapping range +5% to -10% in steps of 2.5%having Cable boxes on HV/LV side suitable for 3 x 240 Sq.mm. XLPE Cable of 11 KV grade with accessories, buckholz relay i/c first filling of filtered dehydrated oil and confirming to IS 335& Transformer losses as per IS 1180 level-2 & as per specification attached complete in all respects as required at site. • Max Continuous Rating = 630 KVA • Voltage Ratio = 11/0.433 KV• Tapping (Range/ Step) off Circuit Tap Changer = +5% to -10% in step of 2.5% off load • Insulation Class = A Class • Application of the Transformer = Distribution• Vector Group = Dyn 11• Temperature Rise at Rated Load over Ambient of 40°/50° C• Cooling = ONAN(Make:- Kirloskar/Schenider/ABB or as approved by Engineer-in-charge) 30 Supplying, Installation, Testing and Commissioning of Indoor Type Floor Mounted metal clad, 11KV VCB Panel with 1 No. VCB for ICOG System (Incoming-Outgoing System), Totally Enclosed. Horizontal drawout, Horizontal/Vertical Isolation type Breaker as per IS 13118 & as ammended upto date and additional specifications as mentioned below, manually charged and motorized /manually closing breaker suitable for use on 11 KV, 3 Phase, 50 Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated Aluminium Bus Bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories i/c connections suitable for 3 x 95 sqmm XLPE 11 KV cable (cable entry frombottom/top/side) (MAKE:- Kirloskar/ L&T/ Crompton/Schenider)1. All CTs and PTs shall be cast resin type.2. 2. All PTs should be Fixed type.Detailed Specifications:-1 Nos. 800A TP Electrically drawout type Vacuum Circuit Breaker, 11KV, 20KA/3 seconds suitable for 630A TP, EDO, 18.4KA/1 second with following accessories:a)Spring Charge Motor, 240V A.C, Closing Coil 24V DC, Shunt Trip Coil 24V DC, Operation Counter with Mechanical ON/OFF Push Buttonb)Mechanical Indicator ON/OFF, Aux. Contacts 4NO + 4NC, Spring Charge/Discharge,Mechanical Spring Charging Device.c)Mechanical Emeregency Push Button2. 1 No. 11 KV / 110V PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-15 kV), digital type, selector switch for voltmeter and protection fuses / MCB for HT metering up to 12 KV on incomer.3. 1 No. Microprocessor based numerical relay with O/L,E/F and S/C protection.4. 1 sets of 3 nos dual core dual ratio CTs 50/50/5/5A of 15 VA burden and accuracy class - 0.5 for metering and class 5P 10 for protection.5. Flush mounted Type High Speed Tripping Relay,6. Flush mounted Type DC Operated Auxiliary relay for Transformer Faults with Three Pair of Relay Element7. 1 Nos. Anti Pumping relay8. Annunciator Set 8 Window Type with Hooter for Fault Indication9. Supplying, Installation, Testing and Commissioning of Power pack with 220 volt AC input & 24 volt DC continuous output suitable for closing / tripping / indication of 1 No. HT Panel Boards with 2 Nos. 12 volts each maintenance free batteries of 100 AH each, charging unit, capacitor bank for emergency delivering for Trip system complete with suitable capacity of Ammeter & voltmeter i/c connections with 2.5 sqmm FRLS insulated copper conductor cable etc. as required. 31 Fabrication Supply Installation Testing and Commissioning of Main L.T Panel suitable for 415 Volt, 3 Phase 4 Wire System, 50Hz AC Supply. Panel Shall be fabricated out of 1.6MM thick CRCA Sheet for load bearing and non load bearing members, Gland Plate shall be fabricated out of 2MM thick CRCA Sheet. Panel shall be Powder coated with RAL 7032 Shade for Doors and Body and have suitable solid links for Incoming ond Outgoing of the ACB with Electrical Grade Aluminium of 1000 Ampere Capacity supported on DMC/SMC Bus Bar Supports. Earthing shall be done with 25 X 5MM G.I Strip running acroos the Panel Length. The Control Wiring for Metering and Display Instruments shall be done with PVC Insulated 1.1KV Grade multi stranded copper wire of 2.5 Sqmm. Proper Ventilation system for heat disipation shall be provided with Panel including ventialtion fan and louvers. The Panel Shall not be less than 1875 X 2000 X 750 m.m or Cm³(H,L&D) The Panel shall be fitted with the following switchgear & instruments as mentioned below:-Incoming:-a)1000A TP ACB, Manually Type with following protection features such as Overload and Shor Circuit protectionb)Digital Type Multifuntion Meter, bearing Cl 1 Accuracy without RS485 Portc)Phase Indication Lamps for R-Phase, Y-Phase and B-Phase, 240V A.Cd)ACB ON and OFF Indication Lampse)6A SP MCB, 10KA Breaking Capacity for Protection and Control Circuitf)1 Set of 1000/5 CT, CL-1.0, 15VA Burden Tape WoundOutgoing:-a)55KW Star Delta Starter with ML4 contractors and 200A TP MCCB 36KA Breaking Capacity with suitable Handle and Spreaders: 4 Nosb)30KW Star Delta Starter with ML3 contractors and 200A TP MCCB 36KA Breaking Capacity with suitable Handle and Spreaders: 4 Nosc)400A TP MCCB, 36KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 4 Nosd)200A TP MCCB, 25KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 1 Nos.e)125A TP MCCB, 25KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 1 Nos.f) 100A TP MCCB, 25KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 4 Nos. 32 Supplying, installation, testing & commissioning of Cubical Type Phase sequence corrector suitable for 415 Volt, 3 Phase 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 2mm thick CRCA sheet of size for frame work and covers, having Gland plate less than 3mm including cleaning and finishing complete with powder coating in approved shade, having links not less 600A capacity. the Bus Bar support (wherever required) with short curcuit withstand capacity of 31 MVA for 1 sec.Entire panel shall have a common Earth Bus of suitable size at the Rear with 2 Nos. Earth stud, solid connections from main Bus Bar to switch Gears with requires size of Aluminium Bus Bar (wherever required) and control wiring shall be done with 2.5 sq.mm PVC insulated copper conductor single core cables. Including providing and fixing the following switch Gear.A) Materiala) 580A Three Pole Power Contactors, AC3 Duty, Coil voltage 220 V A.C: 2 Nos. (Make:- ABB/L&T/C&S)b) LED type indication Lamps RYB (3 set) Aux. Supply: 220V A.Cc) Control Miniture Circuit Breaker (3 Nos.) SP, 10KA : 6Ad) Single Phase Digital Type Ampere Metre, 3 Phase 4 wire system, Flush type 96 Sq.mm. (1 Nos.) Class-1 accuracy, CT-Input-5A, Aux. Volt-220V,ACe) Ampere Selector Switch (1No.) Rating : 6Af) Single Phase Digital Type Volt Metre, 3 Phase 4 wire system, Flush type 96 Sq.mm. (1 Nos.) Class-1 Accuracy, Range:- 0-500 V, Aux. Volt:220V, A.Cg) Voltage Selector Switch (1No.) Rating : 6Ah) Current transformer 600/5A, Single Ratio, Single Core, 1Ø (3 Nos.) , Tape wound, CL-1.0 & 15VAi) LED type Indication LampsON/OFF (2 set) Aux. Supply: 220V A.Cj) Auto/ Manual selector switch (2 Nos.), Rating : 6Ak) Phase Sequence correction relay (1 Nos.) Aux Volt :220V, A.Cl) Audio Indication for Phase sequence Reversal(1 Nos.) Hooter : 220V A.C.m) On Delay Timer (1 Nos.) Aux Volt :220V, A.C 33 SITC of 200KVAR APFC Panel made out of 1.6mm Thick CRCA Sheet duly powder coated complete with suitable size of Al. Bus Bars & internal wiring with suitable size of Copper wire including Providing and Fixing following Switchgear and Metering instruments complete as required. Panel size shall not be less than 1575m.m or Cm³*1900*350.. the Capacitors Shall be Divided as per the mentioned Pattern for 200KVAR SystemA) MaterialMain Incomer:-a) 400A TP MCCB, Thermal based Release with O/L & S/C Protection: 1 Nos.b) Rotary Operating Mechanism: 1 Nos.c) Phase Spreaders: 1 Setd) 12 Stage APFC Relay, Microprocessor Based, with Different Display Parameters.e) Phase Indication Lamps, 220V-240V AC : 3 Nos.2) Outgoing:-a) 63A TP MCCB, Thermal Magnetic Release with O/L & S/C Protection, with ROH and Spreaders: 6 Nosb) 40A TP MCCB, Thermal Magnetic Release with O/L & S/C Protection, with ROH and Spreaders: 2 Nos.c) 25A TP MCCB, Thermal Magnetic Release with O/L & S/C Protection, with ROH and Spreaders: 2 Nos.3) 200 KVAR Capacitor, MPP and Cylindrical Type:-a) 25KVAR Capacitor Bank: 6 Nos.b) 15KVAR Capacitor Bank: 2 Nos.c) 10KVAR Capacitor Bank: 2 Nos.4) Capacitor Duty Contactors of Various Ratings for Capacitor Switching:-a) Capacitor Duty Contactors for 25KVAR Cap. Bank , MOC 25 or Equivalent : 6 Nosb) Capacitor Duty Contactors for 25KVAR Cap. Bank , MOC 15 or Equivalent : 2 Nosc) Capacitor Duty Contactors for 25KVAR Cap. Bank , MOC 10 or Equivalent : 2 Nosd) Side Mounting Block : 10 Nose) Push Button with Element Set for Manual Start & Stop of Capacitor Bank : 10 Setsf) Indication Lights for Capacitor ON Indication : 20 Nos.g) 4 Ventilation Fans with Louvers for Cross Air Ventilation : 1 Nosh) Auto/Manual Selector Switch for Auto/Manual mode of Operation : 1 Nos. 34 Copper Conductor LT Cables:-Supplying, Laying and fixing of following sizes P.V.C. insulated and P.V.C. sheathed/ XLPE CopperConductorarmoured Cable of 1.1 KV grade as per IS:1554 or amendment up-to-date on surface including connection making, taping etc. complete as required. (Make:- National/Grandlay/ Glouster/ Poly-Cab/ Havells/ Phinolex or as approved by the Engineer-in-charge)4C x 10 sqmm. 35 4C x 120 sqmm 36 4C x 150 sqmm 37 Aluminium Conductor LT Cables:-Supplying, Laying and fixing of following size P.V.C. insulated and P.V.C. sheathed/ XLPE AluminiumConductorarmoured Cable of 1.1 KV grade as per IS:7098 or amendment up-to-date on surface including connection making, taping etc. complete as required. (Make:- National/Grandlay/ Glouster/ Poly-Cab/ Havells/ Phinolex or as approved by the Engineer-in-charge)3.5C x 300 sqmm 38 3.5C x 150 sqmm 39 Aluminium Conductor HT Cables:-Supplying, Laying and fixing of following size P.V.C. insulated and P.V.C. sheathed/ XLPE AluminiumConductorarmoured Cable of 11 KV(E) grade as per IS:7098 or amendment up-to-date on surface including connection making, taping etc. complete as required. 3.5C x 300 sqmm(Make:- National/Grandlay/ Glouster/ Poly-Cab/ Havells/ Phinolex or as approved by the Engineer-in-charge) 40 Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 x 16 sq. mm 41 4 x 35 sq. mm 42 4 x 10 sq. mm 43 Supply and making outdoor end jointing with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 11 KV grade as required.3C x 300 sq. mm 44 Supplying & fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth busbar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 6 way, Double door 45 8way, Double door 46 Supplying and fixing metal box of 100mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 47 Supplying, installation, testing & commissioning of energy efficient LED Flood light luminaries of system wattage 72 watt complete with mounting brackets & accessories i/c connections complete as required.(Make:- Bajaj/Philips/Crompton/Halonix) 48 Supplying and fixing followingpiano type switch/socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch 49 15/16 amp switch 50 3 pin 5/6 amp socket outlet 51 6 pin15/16 amp socket outlet 52 Supplying and fixing (two module) stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required. 53 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, , miniature circuit breaker suitable for inductive load of folloeing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole 54 Single pole and neutral 55 Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVS insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular plate, sitable GI Box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Group C) 56 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.2x2.5 sq.m + 1x2.5 sq.m earth wire 57 2 x 4 sq. mm +1 x 4 sq.mmearth wire 58 Supplying, installation, testing and commissioning ofHeavyduty following sizes exhaust fan 900 RPM totally enclosed heavy duty motor with die castaluminium rotor suitable for operation on 240 volts 50 Hz AC single phase Supply including installation of exhaust fan in the existing opening, making good the damages as required. .(Bajaj, Usha, Khaitan, Havells, Orient ) or as approved by Engineer-in-charge.450 mm Sweep 59 Supplying, installation, testing and commissioning of 1200 mm sweep AC electric ceiling fan capacitortype with double ball bearing complete with down rod, canopies, shackles, blades but without regulator suitable for operation on 230/240 volts, 50 Hz single phase AC supply including wiring the down rod of standard lenth up to 1 mtr with 2x1.5 sq. mm PVC insulated copper conductor with fan sheet etc. as required.(Make:- Bajaj/ Usha/ Khaitan/ Havells/ orientor as approved by Engineer-in-charge) 60 Supplying, installation, testing & commissioning of prewired Indoor decorative 18/20 watt LEDbatten extruded aluminum housing& opal diffuser. IP20 complete with all accessories including connection making etc. as required. (Make:- Bajaj/ Halonix/ Havell’s/ Crompton/ Phillipsor as approved by Engineer-in-charge) 61 Supplying and fixing of following size P.V.C. insulated sheathed /XLPE Aluminum conductor cable of 1.1 KV Grade armoured as per IS:7098 on surface as required. (National,Grandlay, Glouster, Poly-Cab, Phinolex or as approved by Engineer-in-charge). 2 x 10 sq.mm 62 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. 63 Providing and fixing 25 x 5 mm G.I.strip on surface or in recess including connection etc. as required. 64 Providing and laying 6 SWG G.I wire on surface or in recess for loop earthing along with existing surface/recessed/conduit/submain wiring/cable etc. as required. 65 Supplying, Installation, Testing and commissioning of 7.5 Tonne capacity Single Girder E.O.T. Crane comprising of Main Girder, End carriages -02 nos with long travel motors – 02 Nos, 01 Nos 5 Tonne capacity Wire Rope Electric Hoist, pendant controlled along with brakes, limit switches and electric panel. All motors i.e. Hoisting/ Lowering, cross travel and long travel shall be compatible with VVVF drive and the speeds can be adjusted from zero to maximum speed. The complete system includes erection of columns, LT Girders, LT rail/ Sq Bar, 01 no DSL system (Shrouded type)(MAKE: - GLOBE/ WH BRADY/ GARLIC) 66 Supplying, Installation, Testing and commissioning ofNew Generation Energy Saving & Environment friendly long versatile pressure die cast aluminium IP 66 roadway luminaire with high power 150 Watt LED street lights complete with all accessories etc. as required.(Make:- Phillips/Bajaj/Crompton/Halonix/ Havells or as approved by Engineer-in-charge) 67 Supplying, Installation, Testing and commissioning ofNew Generation Energy Saving & Environment friendly long versatile pressure die cast aluminium IP 66 roadway luminaire with high power 100 Watt LED Flood lights complete with all accessories etc. as required.(Make:- Phillips/Bajaj/Crompton/Halonix/ Havells or as approved by Engineer-in-charge). 68 Fabrication & installation of S.S. Bar Screen/ Jaal inside Suction side of Pump Sump in slightly inclined position of required height with M.S. Platform etc. for ease of removal of foreign materials, hyacinth, jute, bags etc. from the suction side completed etc. as required at site.Construction, maintenance and subsequent removal of earthen bundies including cost of excavation earth filling of E.C. bags with earth, stitching and placing in position for care and diversion of all kinds of water entering or flowing in the drain and pumping out surface as well as under groung seepage water to keep the construction area completely dry for execution of entire work including its execution of work in or under water and or liquid mud wherever required with round the clock watch & ward/maintenance of earthen bundies to keep the working area/site dry complete as per specification & direction of Engineer-in-charge. 69 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500 D or more. 70 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 71 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cementconcrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverableseparately). All works upto plinth level. 72 Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 73 Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as Nuts, Bolts,fasteners etc.).
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Delhi View Result →
7.
Drinking Water Supply and Sanitation #10284392 Price Bid
Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Turku Tachloo Of Jal Shakti ( Phe ) Mechanical Division South Awantipora Under Jjm.- 1 Supply, Installation, Testing & Commissioning Of Submersible Horizontal Monoset Pumping Unit For Raw Water Of River As Per Is 8034 With Following Specification Are As Under :Pump : Discharge: 10000 Gph At 19 Mts Headefficiency= Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller = Stainless Steel Pump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelimpeller:Impeller Is Of The Enclosed Or Semi – Enclosed Type And Properly Balanced.Enclosed Impellers Equipped With Seal Rings On Their Hubs.Coupling:A Suitable Coupling Arrangement Provided With Pump Set.Non Return Valve:-Non Return Valve Of The Suitable Size Provided Above The Pump Discharge Case.Motor:-Method Ofstarting = Star – Delta Speed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90% Rating= Not Less Than 5 Hpclass Of Insulation =F / Suitable For Above Parameterssubmersible Motor Should Be Water Filled Water Lubricated Squirrel Cage Type Having Capacity For Above Pumping Parameters And Working On 3 Phase; Ac Supply Ranging From 380 To 415 Volts, 50Hz. The Motor Should Be Sealed By Radial Rings To Avoid Mixing Of Well Water With Motor Filled Water.A ) The Job Includes Providing And Fitting Of Interlocking Arrangement Against Any Failure Of Coupling. It Must Be Fabricated Out Of Ms Strips Of Suitable Size And Length.B ) The Job Includes Providing And Fitting Of Appropriate Size Ms Nipple 2 Feet Long Threaded On One End And Welded To Same Size Ms Flange Ofthickness ( As Per Table-17 ) At Other End For 80 Mm Diameter Column Pipe As Per Site Requirement. The Threaded Portion Should Be As Per Size Of Pumping Out Let For Proper Fixing.The Job Includes Providing And Fitting Of R. I. Cloth Joints / Rubber Washers With Nuts, Bolts And Washers For All Joints Of Column Pipe. The Job Also Includes Lowering Of Pumping Unit In The Well Then Proper Testing And Commissioning Of Pumping Unit On Full Load At Site.Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. 2 Supply, Installation, Testing & Commissioning Of Submersible Horizontal Monoset Pumping Unit For Pst / Sump To Liftwater Through Pressure Filterplant Upto Oht As Per Is 8034 With Following Specification Are As Under :Pump : Discharge: 10000 Gph At 45 Mts Headefficiency= Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller = Stainless Steel Pump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelimpeller:Impeller Is Of The Enclosed Or Semi – Enclosed Type And Properly Balanced.Enclosed Impellers Equipped With Seal Rings On Their Hubs.Coupling:A Suitable Coupling Arrangement Provided With Pump Set.Non Return Valve:-Non Return Valve Of The Suitable Size Provided Above The Pump Discharge Case.Motor:-Method Ofstarting = Star – Delta Speed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90% Rating= Not Less Than 15 Hpclass Of Insulation =F / Suitable For Above Parameterssubmersible Motor Should Be Water Filled Water Lubricated Squirrel Cage Type Having Capacity For Above Pumping Parameters And Working On 3 Phase; Ac Supply Ranging From 380 To 415 Volts, 50Hz. The Motor Should Be Sealed By Radial Rings To Avoid Mixing Of Well Water With Motor Filled Water.A ) The Job Includes Providing And Fitting Of Interlocking Arrangement Against Any Failure Of Coupling. It Must Be Fabricated Out Of Ms Strips Of Suitable Size And Length.B ) The Job Includes Providing And Fitting Of Appropriate Size Ms Nipple 2 Feet Long Threaded On One End And Welded To Same Size Ms Flange Ofthickness ( As Per Table-17 ) At Other End For 80 Mm Diameter Column Pipe As Per Site Requirement. The Threaded Portion Should Be As Per Size Of Pumping Out Let For Proper Fixing.The Job Includes Providing And Fitting Of R. I. Cloth Joints / Rubber Washers With Nuts, Bolts And Washers For All Joints Of Column Pipe. The Job Also Includes Lowering Of Pumping Unit In The Well Then Proper Testing And Commissioning Of Pumping Unit On Full Load At Site.Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. 3 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units.The Body And Bonnent Of The Valve Shall Be Of Ductile Iron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions Rest Specification As Per Cluase 12 Of Sbd. 4 Providing And Fitting Of 100 Mm Dia Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) .Rest Specification As Per Cluase 13 Of Sbd. 5 Fabrication, Providing And Fitting Of 100Mm Dia Washout Tee / Y Junctionwith Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I C-Class Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. 6 Fabrication, Providing And Fitting Of Modular Motor Control Panel Of Appropriate Size Fabricatedout Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted Withaccessoriesmu-G 10 Rest Specification As Per Cluase 43 ____ Of Sbd. 7 Providing, Fitting, Testing And Commissioning Of Voltage Stabilizer As Per Specifications Below:Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multistep.Type Of Regulator : Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50 ±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Rest Specification As Per Cluase 44 Of Sbd.Rating: 50 Kva 8 Providing And Fitting Of 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipment. The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. The Main Specification Of The Cable Is Given Below: Rest Specification As Per Cluase 47 Of Sbd.Size: 10 Sqmm 9 P / I Of Earthing Station For Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size : 80 Mm Dia , Length : 2000 Mmback Fill Compound : 30 Kg 10 Supply, Installation, Testing & Commissioning Of 1000 Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 11 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Belowshall Be Of Providing Of Tool Kit Consists Of Following Itemsi. Double Ended Spanner ( Chrome Plated ) 02 Sets Complete Ii. Double Ended Ring Spanners Chrome Plated 02 Sets Completeiii. Allen Key Set Black Finish 02 Sets Complete Iv. Combination Pliers Insulated With Thick C.A Sleeve; Size In Mm 165, 210, 255 Each – 02 No. V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205 Each – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205 Make – 02 No.Vii. Insulated Screw Driversblade Length In Mm Blade Dia. In Mm Tip Dimensions In Mm Quantity50 3 1.6 X 0.4 02 75 3 1.6 X0.4 02 100 3 3 X 0.4 02125 3.5 3.5 X 0.5 02150 3.5 3.5 X 0.5 02 200 4 4 X 0.6 02 300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg, 340 Gm , 600 Gm –Each – 1No. Ix. Heavy Duty Pipe Wrench Length In Mm - 200, 300, 600 Each – 01 No.X. Electric Multimeter=1No Xi. Digital Multimeter – 1No.Xii. Digital Clamp Tester Capable To Measure Up To 400A - 1 No. Xiii. Hack Saw Frame With Hack Saw Blade – 01 No.Xiv. S-16 Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. 12 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 13 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting, Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 14 Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’S Iv ) Single Bed Warm Blankets With One Sided Fur- 02 No’S The Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patella ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks 15 Providing & Fitting Of Lighting Points In 1.5 Mm Sq. Multi Strand Pvc Wire As Conductor To Be Laid / Carried In Pvc Channel / Conduit As Per Site Requirement. The Job Also Includes Providing And Fitting Of 5 Amp. Switch Button / Angle Holders To Be Fitted With 15 Watt Ledinside The Pump House. 16 Providing & Fitting Of Heating Points In 2.5 Sq. Multi Stand Conductor To Be Laid & Carried In Pvc Channel / Conduit As Per Site Requirement. The Job Includes Providing And Fitting Of 16 Amp. Switch Socket Combine 17 Providing And Fitting Of 18 Sweep Seiling Fan Of Standard Make Including The Cost Of All Cables , Connections , , Controlsystem Along With The Speed Regulator With Control Switches For The Power Supply 18 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 19 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 20 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 21 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department.Size:6’×1’6” 22 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site.Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 23 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items. 1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp.Rest Specification As Per Cluase 50 Of Sbd. 24 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36 Having Following Specs:Input: 90-240 V 50 Hz Power Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170° Lumens: >12000Operating Temperature: -20°C To 60°Crest Specification As Per Cluase 51 Of Sbd. 25 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 26 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 27 Providing And Laying Of Soling Stone 28 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With 1: 2 : 4 ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) . 29 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 30 Painting Of The 2 No. Gantry And Plate Form Of Wellusing One Coat Of Red Oxide Metal Primer And Two Coats Of Enamel Paintof Different Shades 31 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features Capacity=2 Ton ( P ) No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 Mdetailed Techinical Specification As Per Cluase 24 Of Sbd 32 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 33 Providing & Fitting Of Dozing Pumps To Doze Required Quantity Of Alum / Chlorine In The System. The Capacity Of The Dozing Units Shall Be 0-12 Lph Capacity. Dozing Pups Shall Be Provided With All Required Accessories Including 200 Ltrs. Pvc Tanks And Cable For Connection. Each Pump Shall Be Provided With 20 Mtrs. Cable As Per Required Specification. 34 Providing And Fitting Of Pressure Gauges With Adopters To Replace Damaged Ones .These Pressure Gauges Should Be In The Range Of 0-50 Kgf / Cm / Sg And Bereputed Make. 35 Removal Of Choked Filter Media From 5000 / 6000 Gph Pressure Filter Vessel. The Job Includes All Loads And Lifts, Disposal Of Choked Media To Dumping Site Outside The Premises Of The Plant Within A Lead Of 5 Km. The Vessel Needs To Be Cleaned Properly And Dried Before Laying Of Fresh Media.Providing And Laying Of Filter Media Of Specific Size And Grade To Be Laid In 5000 Gph Pressure Vessels ( 02 No ) Duly Washed, Free From Dust , Dirt , Loom And Any Other Inorganic Materialor Suspension .The Job Includes Carriage Of Filtermedia From Ganderbalto Site Including Allall Loads And Liftsrequired On The Site Condition. The Media Is To Be Lad In Different Layers Of Specific Size And Grade From Bottom To Top Over The Filter Bed Plate. The Bottom Layer Is To Be Laid Without Tilling / Damaging The Pressure Nozzles. Providing And Fitting Of 12 Mm Dia. Fine Threaded Pvc Nozzles Auxiliary Type To Be Fitted On Filter Bed Plate Of Pressure Vessels ( 02 Nos ) . Providing And Fitting Of 29 Inch. Dia. Rubber Washers / Gaskets For Manhole And Inspection Chamber And Opening Of Pressure Filter Vessel.Providing And Fitting Of 3”X5 / 8” Nuts And Bolts.Overhauling Of Backwash Unitof 5000 Pressure Vessel ( 02 No ) By Way Of Dismantling Of Unit Parts Assembling Cleaning, Oiling, Greasing, Replacement Of Any Damaged Parts, Refining Of Sub Assemblies & Installation Of Backwash Unit With Its Existing Suction & Delivery Outlet. Job Includes P / F Of Packing & Consumables. Painting With Synthetic Enamel Paint Two Or More Coats Of Approved Brand And Bar Pressure Clarifier Pressure Filter Vessel, Fittings And Complete Piping After Cleaning Of Dirt By Kerosene Oil And Application Of Steel Primer Of Specific Grade.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Jammu And Kashmir View Result →
8.
Housing Urban and Rular Development #10200585 Price Bid
Tender For Construction Of New Muthalvar Padaippagam At Bhakthavachalam Park, Chennai; 1 Civil Works 2 Dismantling removing the existing Reinforced Cement Concrete work etc., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 3 Dismantling removing the existing Brick work etc., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 4 Removing the existing ventilators,doors and windows including removal of frames ,hinges and fastenings arefully and stacking the same at site etc., complete. 5 Dismantling Floor finish and daddoing walls in cement mortar with mosaic tiles/glazed tiles/cuddapah slabs. 6 Carting away the surplus earth and debris to a lead of 5kgm.including Loading, unloading and dumping in the Corporation Land as directed during the execution. 7 Dismantling removing the existing closet, fitting, pipes, etc as per site., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 8 Civil Works 9 Providing and constructing cast in situ hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipments like piling rigs, temporary casing of appropriate length forsetting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method dulythrough all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap). 10 Boring or chiselling through any obstacles, boulders, weathered rock, etc. Upto founding level of piles for seating resting or socketting of files. The rate quoted shall include demobilising the site with all plants, equipment, piling rigs, necessary personnel brought for piling work, including removal and transportation of debrise away as directed, cleaning and reinstating site to original condition as acceptable by the Architect on completion of piling work. 11 450 mm Dia 12 Carrying out initial working pile load test on specified dia piles as specified in IS:291 1 (Part 4). Includes all plant, equipment, machinery. Instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete 13 Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. 14 Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 300 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. 15 Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive ofgiving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12to a depth of 8 in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., 16 Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation. 17 Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth. 18 Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over. 19 Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12 to a depth of 8 around the building before laying the plinth projection.This holes has to be be closed after the treatment. 20 Supplying and Filling withM-sand in floor and others sub structures for 150mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of river sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification. 21 Construction of Wet Mix Macadam 150mm compacted thickness in two layers by providing , laying , Paving , and compactingofaggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensorpavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work. 22 Providing and laying plain cement concrete 1 : 4 : 8 ratio of(1 cement , 4 sand and8 graded stone aggregate 40mm nominal size) in foundation and basement for 100mm thick including dewatering wherever necessary and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification. 23 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 24 For column footing plinth beam , pile cap staircase steps, piers raft beam raft slab etc., 25 For Plain surfaces such as RCC slab, Beam, Bed Block, waist slab, landing slab, lintel etc., 26 For square or rectangular column, boxing, sunshade etc., 27 Providing and Laying M 30 Standardised concrete Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by theEngineer-in-charge 28 Basement 29 GF 30 FF 31 Terrace 32 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 33 Brick work in cement mortar 1:6(one cement and four sand) using fly ash bricks of size 230mmx110mmx70mm for foundation and super structure as per detailed specifications and as directed by the departmental officers 34 Ground Floor 35 First Floor 36 Terrace 37 Brick partition walls of 11.50cm thickness using best quality Fly ashbricks of size 9 x 4-3/8 x 2-3/4(230x115x76) in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) 38 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc.. with cement Mortar 1:3 (1 of Cement : 3 ofP sand) according to the specification. The Rate including Cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 39 Plastering of 12 mm thick for Internal walls with cement mortar 1:4 (1 of cement : 4 of fine P.sand)according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 40 Plastering 12 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 4 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by theEngineer-in-charge. 41 Supply and painting oftwo coats of Plastic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge.(Internal surface) 42 Supplying and painting of2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 43 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete (M-0652) 44 Supplying and filling the sunken slabarea byBRICK-BATCOBA by adding CICO NO:1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- AcrylicPolymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc.Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 45 i) Includingapplying two coats not less than 2 mm thick of TAPECRETE- AcrylicPolymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 46 Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colourwith base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 47 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 48 Providing and laying factory-manufactured linoleum flooring in the form of Rolls in the size of 12192mm of length and 1981mm of wide with 2mm thickness which laying above in the vertified tiles using the adhesive the flooring shall be laid over a smooth, level subfloor using manufacturer-recommended adhesives, complete in all respectsRoll flooring shall be laid with butt joints; edges shall be cold-welded or heat-welded for seamless joints.Apply a coat of linoleum polish or sealant after laying (if uncoated variant is used). Proper rolling to remove air pockets and ensure bonding the rate is inclusive of all necessary material, labour, transportation etc asper standards. 49 Finshing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in cement Mortar 1:3 (one cement and threee sand ) 12mm thick mixed with water proofing compound conforming ti ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed withred oxide and water proofing compound including curing et,. complete complying with standard specification and as directed by the departmental officers 50 Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. 51 Supply and laying with best quality the following materials of Machine Polished granite slab not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge 52 Supplying and fixing plywood partition with Teakwood frames of75x50mm size and with 3mm thick commercial plywood fixedwith screws and nails including fixing in position with 4Nos of iron hold fasts 50x6x230mm size etc.,complete.(ISI STD) 53 Supply & fixing of Tamilnadu Logo & Symbols as per design & Elevation. 54 Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 55 Supplying and fixing UPVC windows of casement type Open from the profile the size of outer frame 60mm x58mm and shutter profileare reinforcement withGI/1mm125GSM and 100% Corrosion free,the profiles are multi Chambered sections with wall thick of 2mm. TheEPDM rubber covered with over all the edges of frame and shutter the shutter .will be provided with Espag multi power point locks and also it operates with Handle. The Corners and joint should bewelded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thk should be provided to the shutter and it should not allow leakege of water even at most ranging storms and should have key lockable action, security protective hinges , strong locking system and as per size for arresting noise and energyloss. The connecting mechanism between sash and windowshould be fixed to the wall with 100% packing with screws and silicon Packing all roundthe frames. The window should be got approved from the Executive Engineer before use on work. 56 Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work. 57 FRP Door Sutter with FRP Door Frames along with vision panel (as per drawing) made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers. 58 Supplying and fixing UPVC Louvered Ventilators of from the profile the size of outer frame 60mm x58mm and shutter profile size of 60mm x 78mm both profile are reinforcement withGI/1mm125GSM and 100% Corrosion free,the profiles are multi Chambered sections with wall thick of 2mm.The EPDM rubber covered with over all the edges of frame and shutter . The Corners and joint should bewelded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thk should be providedin the Louvers.The window should be fixed tothe wall with 100% packing with screws and silicon packing all round the frames.The Ventilator should be got approved from the Executive Engineer before useon work. 59 FALSE CEILING WITH GYPSUM PLAIN TILES (600x600)Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm(Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with 12mm Gypsum plain Tiles as per stansdards 60 Providing & fixing of Brick Cladding in elevation as per drawing. The rate is inclusive of all necessary material , labour, transportation etc complete as per standards. 61 Supplying and Fixing of aluminium Dye Cast Letters of approved size and colour treatment processis achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes aluminium Dye Cast Letters 6 Size. Tamil Stainless Steel Letters 25CM 62 Supplying and fixing M.S.Grill gate of required size in two shutters with necessary iron members, gun metal cups and wheels 75mm dia. with fittings locking arrangements,etc., complete,including painting a priming coat of approved primer,etc., complete (The design of gate furnished is subject to alteration during execution.) 63 Supplying and Painting the wall with Texture Finish Paint including thorough scraping, clean removal of dirt, Primer. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) 64 GYPBOARD DOUBLE SKIN PARTITIONProviding and fixing of Gypsum Dry wall Double skin partition of 75 mm thick using SAINT - GOBAIN GYPROC or Equivalent make and the partition shall be of one layers of tapered edge 12.5mm thk Gyp board screw fixed with dry wall screw of 25mm at 300mm c/c to either side of 48mm studs. GI steel sections to be placed at 610 mm c/c in 50mm floor and ceiling channel 0.55mm thick having equal flanges of 32mm made of GI steel with joints staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper and 2 coats of Drywall top Coat suitable for Gypsum upto primer level.As per India Gypsum Specs.Note: Angle Bead to be used at external angles to get straight line finish & protection from normal impacts. 65 Providing and laying water proofing treatment to vertical and surfaces for sunken portion of depressed portions of W.C., and the like consisting of :i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) 2nd course of 20mm cement plaster 1:2 (1 Cement : 2 Coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) 3rd course of applying blown or residual bitumen applied hot at 1.7Kg per sqm of area. iv) 4th course of 400 micron thick PVC Sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm) 66 PLUMBING WORKS 67 Supply,erection and testing & commisioning of 3HP Submersible pumpset in the capacity of 6000 LPH @ 300Ft, max. total head of 350 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge.( Sump to OHT transfer pump) 68 Labour charges for the erection of submersible pumpset in borewell/openwell including fixingand jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 69 Drilling of 6 dia vertical borewell so as to have a finished size of 6 dia borewell in boulder area to any required depth as decided by theincluding Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractors rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs. 70 300mm 71 Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by V notch method. 72 Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 73 200mm dia CS ( plain pipe) 74 150mm dia CS ( plain pipe) 75 Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. 76 200mm dia CS ( plain pipe) 77 150mm dia CS ( plain pipe) 78 Supply and fixing in position whiteEuropean Water Closet of approved make with low level concealed flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directedby the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.URINAL WITH FIXING ACCESSORIES SET, SIZE - URS-WHT- 13253N 79 Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia B Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass, wast couplingNipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers.(TheWash basin should be got approved by the Executive Engineer before use on works. 80 Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre longflexibletubeincludingcuttingandmakinggoodthe wallswherever requiredetc complete.complyingwithstandardspecificationandas directedbytheDepartmentofficers.Thequalityandmakeofhealth faucet should be got approvedby Concern department Engineer before use on work. 81 Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc.complete,complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work. 82 Supplying and fixing in position Mirror of size 600x450mm of approved quality and brand with necessary plastic back PVC frame with bottom stand using brass screws rawl plugs for fixing etc complete complying with standard specification and as directed by the Departmental officers.The colour of frame and quality of mirror should be got approved by the Executive Engineer before use on work 83 Supplying,installing,testing and commissioning of approved make CONCEALED STOP COCK for toilet including neccesary accessories etc,complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work. 84 Supplying and fixing CP angle cock with wall flange including cutting and making good the walls wherever required etc., complete complyingwithstandardspecificationandas directedbythe Engineer Incharge before use on work. 85 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg ,10 kg /sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). 86 160mm Dia 6kg 87 110mm Dia 6kg 88 75mm Dia 6kg 89 50mm dia 6kg 90 Supplying andfixingPVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge. 91 110mm dia 92 Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly limeconcrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) includingdismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ). 93 Constructing solid block masonry manhole various size of deep in cement mortar 1:3( 1 Cement: 4 coarse sand ) R.C.C. Raft & top slab with cement concrete 1:2:4, plain cement concrete 1:4:8 mixfor base course (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size )above that 150 mm thick RCC M25 raft slab inculding reinforcement 10mm dia 150mm c/c bothways. Plastering inside walls with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), finished with a floatingcoat of neat cement ,supplying and fixing SFRC manhole cover with farame , PVC foot rest as per detailed drawing etc the quoted rate shall also necessary excavation and back filling etc complete.complete as per standard design : (the chamber and cover should be got approved by the Executive Engineer before use on works) 94 Manhole 600 x 600 mm internal size ( Depth up to 1000mm) 95 Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesivesand fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works.Internal & Vertical 96 a) 20 mm dia 97 b) 25 mm dia 98 c) 32 mm dia 99 Supplying and fixing manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement,two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by theClient / Engineer-in-charge.Size:600x600mm 100 Supply & fixing of Bottle trap as per standards. BOTTLE TRAP (WITH INTERNAL PARTITION) 32 - ALD-CHR- 769L300X190 101 LANDSCAPING WORKS 102 Planting of Ixora hybrid foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inchincluding loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 103 Planting of Ficus black ornamentalfoliage shrub varietyof height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 104 Planting of Jasmine Plant foliage shrub varietyof height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 105 Planting of Travellers palm ornamental foliage Specimen plantvarietyof height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 106 FURNITURE WORKS 107 Linear type Workstation (1000mm(W) X 600mm(D) X 750+300mm(H)) as per below specificationTable Top: - Made of 25mm Thick E1 Grade Pre-Laminated Particle Board with 2mm PVC Edge Banding.Main Screen : -8mm Sandwitch Glass finishes of Sizes 1050x300mm htUnderstructure: - MS Square Leg cross-section of size 50 x 50mm is Made of Mild Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50*25mm. Rectangular Tube made of 1.6mm thick CRCA Powder coated.Raceways : -Vertical Raceways - 120 MM HT MS Powder Raceways Considered below the Table top With Intermediated legs considered for Wire Provision.Without Middle Cover.Wire Manager: - Wire Manager Hole considered. 108 Storage (Open Shelf) 1200mm 300mm 2100mmIs made 25mm top & all other panel 17 mm thick in prelam particle board finished in Laminate of approved shape, equal shutter 2mm thick edge banding finished. This also includes providing and fixing of hardware like locks, handles, spring loaded hinges etc 109 Supply of Chairs 110 ASPIRE MB (BLACK)* Black Backrest frame, Polished aluminum connected* Mesh back, Seat and headrest fabric* Height adjustable lumbar support with PU surface* Tiltable backrest (can be tiltable when locked inupright position)* 4D adjustable armrest with PU pads* Mould foam with plastic seat upholstery* Mechanism, with seat slide.* Chrome gaslift* Polished aluminum base with plastic cover,* 60mm nylon castors 111 * Versa Medium Back Mesh Chair* AN -70 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Armrests ( Height)* Nylon Base* Fabric Upholstered Cushion Seat 112 Meeting Room TableTable Top: -Made of 25mm Thick E1 Grade Pre-Laminated Particle Board with PVC Edge Banding,Understructure: - MS Leg 50mm 50mm is Made of Mild Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50*25mm.Raceways : Horizontal RacewaysMS Powder Raceways Considered below the Table top With Intermediated legs considered for Wire Provision.Wire Manager:- Flip Cover Considered. 113 Meeting Room Table (2400mm 800mm 750mm) 114 Cabin Main Table with Side Storage (Main Table 1500mm 750mm 750mm / Side Storage 1200mm 450mm 750mm)Side Storage 1200mm 450mm 750mmTable Top: Main and Side Table Made of 25mm Thick E1 Grade Single Top PLPB with 2mm PVC Edge Banding,Understructure: MS Square 50mm Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50mm x 25mm.Flip Cover : Flip Cover 400*143mm Made of AluminiumWire Manager: Wire Box with Socket Plate and Vertebra considered for wiringModesty : Front & Side PLPB Modesty Panel . 115 Librarian TableMain Table 1100mm 440mm 750mm 116 3 Seater Sofa with Table 117 INTERACTS-902 (Leatherette)3 SeaterSize : 1810 (W) x 720 (D) X 740 (H)Made off : the sofa is made of fine quality leatherrite (3s = 8.0 mtr,2s = 6.8 mtr, 1s= 5.3 mtr), the structure is made from silver wood& pine wood, 32 & 40 density foam is used which is covered withroll poly filling for giving comfort and extra softness to sofa. Extra(kangaro company)Legs : are made of stainless steel.Color : Black 118 ELECTRICAL 119 TNEB METER BOX 120 Supply andfixng of TNEB meter board suitable for 3phase100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size1-1/2x1-1/2x1/4rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.100A fuse units (500V), 1No .neutral link,copper earth flat of size1x1/4with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete. 121 M.S. Enclosure (IP65): Supply, Erection , Testing and commissioning of the followingtype M.S. powder coated enclosure for housing the Meteringing service, whch should be made outof16SWG enclosure with provision for cable entry, with Outdoorapplication IP65 as specified Protection, fixed on the wall/Floor withall accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth etc. 122 MAIN Panels 123 MAIN Panels:Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of14 SWG CRCA sheet steel with powder coated finishing, MS base frame, double internal earthing arrangements, 100Amps, rating TPN Copper busbars and Earth bar with interconnection busbar, etc., comprising of the followings:EB Incomer :1 No. 100Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMDG Incomer: 1 No. 100Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMCommon C/O Incomer: 1 No. 100Amps, 4Pole Automatic Changeover Switch with EB ON and DG ON LED Indication lampsMetering : 2 Set of RYB LED Indication lamps2 Nos. of Multifunction Meter with RS 4852 Set of Current Tranformers (200/5A, Cl-1), 1 No. 200/5A CT for APFCR2 Set of Control MCB and Electrical Interlocking between EB & DG Incomers Outgoings: 3 Nos. 63A, 25kA, TP+N, TM MCCB with Ext. RHOM (APFCR &AC)4Nos. 32A, 25kA, TP+N, TM MCCB with Ext. RHOM (Lighting & Spare),6Nos 32A DB MCB inclding all labour Charges And Transports Charges. 124 APFC PANEL: Supply, installation, testing and commissioning of 25 KVAR Automatic power factor correction panel ( APFC ) with 8 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel,enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 8 stage Digital Automatic power factor correction,( APFC ), Auto / Manual selector switch, cluster LED typeindicators, in the incomer,complete with electrolytic grade aluminium bus bars, MPP type Power capacitors, with 5 KVAR x 3 no. 3 KVAR x 2 nos. 2 KVAR x 1 nos. 1 KVAR x 2no. Contactors, MCCB’s, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting,Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, Main panel sensing CT interconnecting wiring etc., all inclusive. 125 Supply, Installation, testing and commissioning of 1 x 58.5KVA, Silent type Diesel Generator Set with AMF Panel complete with suitable size Acoustic enclosure CPCB IV and BIS. Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours operation generally confirms to BS:5514, directly coupled to 58.5KVA at 0.8 Power factor, 415V, 3Phase , 4wires, 50cycles per second self excited, self regulated, with brushless excitation, Alternator generally confirms to BS:5000/IS:4722. DG set shall be complete with radiator, residential type silencer, electronic governor, cable termination box, MS mounting frame, fuel piping, diesel day tank, 24VDC Battery, Battery mounting frame, oil level indicator with gauge board, andall other accessories as per standard specifications.Diesel Generator set shall be mounted on cushy foot or similar type of vibration Isolators. The cost of Exhaust pipe shall be included in this item with Sutable concrete Base at M30 Grade. The DG Set shall be suitable for auto-mains failure startand auto / manualoperations.The DG Should be supplied with Auto-Start-Stop Control panel with suitable rating switchgear 126 DISTRIBUTION BOARDS 127 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCBswitch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wallwith earth connection only.Higher End 128 Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution boardwith double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB asoutgoing in flush with wall with earth connection only. Higher End 129 Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm.with the following in flush with wall with earth connection only. i. 63A 4P MCB - 1 no.ii. 63A 4P 30MA RCCB/ELCB - 1 no.iii. 63A DP MCB Isolator -3 nos.iv. 6A to 32A SP MCB - 12 nos., 130 Supply and Laying of 3 1/2x 70 sq.mm. PVC armoured LTUG cablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 131 Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection. 132 Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. 133 Run of Mains 134 Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 135 Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. 136 Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 137 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. 138 Point Wiring 139 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) Higher End Primary Point. 140 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)Higher EndSecondary Point. 141 Switch & Sockets 142 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 143 Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 144 Supply and fixing of 1 no.6/16A two modulesocket , 1 no.16A one module switch with module cover plate (plastic) on Suitable module concealedBox (GI ) in flush with wall with connections. Higher End 145 Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) 146 Air Condition 147 Supply & Instalation of Air-Conditioner with Copper Coil 2.0 TR Split Type AC Unit - 5 Star Rated, 5 KVA capacity Automatic Voltage Stabilizer with time delay relay, 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit), Inculding MS stand for fixing outdoor unit. 148 Supply and fixing of Copper Refrigerant Piping of 3/8 dia and 5/8with Pipeline nitrle rubber insulation with 50mm PVC water drain pipe line with Non Adhesive Cotton Roll insulation and 3 core Power cable from indoor to Outdoor unit. 149 Supply and fixing of 450mm (18) Wall mounting 5 star rated complete (Higher end) with necessary accessories and hardwares as required. 150 Supply and fixing of 300mm (12) sweep(Heavy Duty) AC exhaust fan complete with necessary wall opening and making good of the wall . 151 Supply and fixing of louvers shutters arrangements for 300mm (12) sweep AC exhaust fan 152 Supply and fixing of 24W LED 2x2 square type Recessedfitting with LED (Higher end) on false Ceiling with suitable hanging support from ceilingwith PVC unsheathed copper leads from terminals to the fitting 153 Supply and fixing of 18W LEDRound type Recessedfitting with LED (Higher end) on false Ceiling from ceilingwith PVC unsheathed copper leads from terminals to the fitting. 154 Supply, installation, testing and commissioning of36 W, 900mm diaCircular LED pendantlight fitting, made out of CRCA powder coated body, aluminium reflectors,poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. KL 3232 155 Supply and fixing of28Watts GATE FIXTURE FITTINGwith cool day light suitable for wall / roof sheet mounting, made outCRCA powder coated body,IP65 aluminium reflectors,poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.(Klite/Millenium/Bajaj Equivalent) 156 Supply and fixing of 8W Light fitting (IP67) Inground fixture with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Klite/Millenium/Bajaj Equivalent) 157 Supply and fixing of MIRROR Light 20W LED Batten 158 Supply and erection of Canon Digital Photocopier (Xerox) Machine IR-3300 / 3235Type of Product : Laser Multi functionalCore Functions: Print, Copy, Scan & SendFirst Copy Time:3.9 SecMultiple Copies :1 to 999 SheetsPrint Speed :45ppmThe laser beams engrave the image or text that you have sent to print on the surface of the drum. When using a copier this process is done using light, the light scans the page required for printing and converts it into an image 159 Supply and erection ofAll-in-one Desktop of HP 27-cb1456in Core i5 (8GB DDR4 /Windows 11 Home/27 Inch Screen/27-cb1456in) with 600VA UPS, Keyboard, Mouse,27 inches, 11th Gen Intel Core i5-1235U6 x 1.8 GHz (Turbo Speed upto 4.2 GHz) Cores Hexa Core, 12 Threads, 18 MB Cache, UHD Graphics 730 Graphics, 8 GB DDR4 RAM Smallest and 512 GB SSD.Ethernet (LAN), HDMI, Multi Card Reader,WiFi, Bluetooth v5.03 x USB 3.0, 1 x USB Type-C and Inbuilt Microphone 160 PRINTER: Supply, installation, testing and commissioning of HP Smart Tank 790 WiFi All-in-One Printer Duplexer with ADF and Magic Touch Panel Inkjet Colour printer, print speed 11-20 sheets with multiple features like print, scan, copy, fax, multi-port connectivity (Hi-speed USB 2.0, Wifi, Bluetooth LE , 1 USB Host, LAN) , 2.4/5G dual band Wi-Fi, Wi-Fi Direct, mobile printing capability, etc 161 Supply, installation, testing and commissioning of Long Range Wifi Device of following Specification: Networking Interface: (1) GbE RJ45 PortPower Method: PoE+, Pasive poE(48V) Max TX power: 2.4 GHzAntenna gain: 2.4 GHzMounting: Wall or Ceiling MountingWifi Satndards : 802.11a/b/gWireless security: WPA-PSK, WPA- Enterprises(WPA/WPA2/WPA3)VLAN: 802.1Q Concurrent Clients: 300+ 162 CCTV 163 Supply, Installation, Testing and commissioning of 16 channel 2 SATA NVR, with 6TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected,Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony. 164 Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand and camera fixed connecting box. (Make: Dahua/Panasonic) 165 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN (Make: Sony/ LG /Samsung). 166 Supply and Clamping of CAT 6 unarmoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. ii)Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 167 Supply and Fixing of Rack with Accessories -Higher end9U Rack with fan extra for the above rack. (Amp/NVR/POE) 168 Supply and Fixing of Rack with Accessories -Higher end4U Rack with fan extra for the above rack. (speaker/data/cctv) 169 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 170 Supply and fixing of POE 8 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 171 Supply and fixing of outdoor4X6PVC box with 102mm x 77mm x 102mm with all fixing accessories. 172 Supply, Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges. 173 Supply and Installation for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up and battery stand . 174 Supply, Erection of 6mLengthpole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. 175 VOICE & DATA 176 Supply, Fixing and Termination ofRJ 11 Single Point ( Point to Point) Crimping, Testing and arrangement charges. 177 Supply & Installation of CAT 6 PVC Module Box I/o socket & face plate single socket Erection and arrangement chargers (Higher end) 178 Supply and fixingofLAN Network Switches Un-Managed 10/100/1000 - 24 Port and 24 Port Patch Panel- Unloaded erection and arrangement chargers. 179 Supply, runing, testing and commissioning of2 Pair Unarmoured 0.5mm Telephone cable in suitable Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 180 PA SYSTEM 181 Supply, Installation,Testing & commisioning of 15W Wall Speaker 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:AhujaAMH402T/Bosch or its equivalent) 182 Supply, Installation,Testing & commisioning of 120 watts P.A Mixer Amplifier with the output power of 120 watts maximum 160watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 wattsRMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000/Bosch) 183 Supply, runing, testing and commissioning of2Core x 1.5sq sqmm PVC insulated un Armoured Speaker Cable in suitable 20mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 184 Earthing 185 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm withcopperearthplateofsize125mmx50mmx6mmwithnecessaryfunnellingarrangementswithnecessary masonry work and with 38mm RCC cover slab for the brick masonry 186 Supply and erection of 17.2mm, 3mtr long, Copper Bonded earth rod with backfill compound, including civil worksof base PCC for chamber andheavy duty Chambercover,, heavy duty chamber cover, etc., as per IS 3043 standards 187 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection 188 Supply and Run of1 of No.8 SWG copper wire for earth connection 189 Supply and Run of1 of No.8 SWG copper wire in suitable PVC rigid pipeon wall / floor / ground for earth connection 190 Supply of 2mx1mRubberMatsuitablefor11KVinstallation confirming to IS(5 Nos) 191 Supply of First Aid Box complete with all First Aid Medicines 192 Supply and fixing of Shock Treatment chart with Glass frame 193 Supply and fixing of4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle 194 Supply and fixing of Fire Extinguishers Co2, 4.5Kg confirming to TAC norms 195 Supply and fixing of Metallic Danger Board as required by the Electrical Authorities 196 METAL SIGNAGE BOARDS: Supply and fixing of metal signages for the following:1. Mudhalvar Padaipagam text in Tamil of size 20 x 15with backlit LED placed over the base, fabricated using stainless steel sheet of minimum 16G thickness brush finish of required size and colour as required. 197 LOGO SIGNAGE BOARD 198 LOGO SIGNAGE BOARDS: Supply and fixing of acrylic signages for the following:1. Mudhalvar Padaipagam logo of size 2 x 22. CMDA logo of size 2 x 33. Directorate of Public Libraries logo of size 3 diawith backlit LED placed over the sun board base, SIDE EDGES(4): 5mm transparent white acrylic sheet with laser cut & 4inches manual raising all around with details. ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS:Front: a. 5mm Imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine.b. Flexi bond make 25mm Sun board for the back of the logo.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
9.
Power #10172978 AOC
Tender For Annual Maintenance Repair Of Md Dvvnl Office Vidyut Adhikari Colony At 220 Kv Sub Station, Sikandra, Agra - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: (DSR 2.1) All kinds of soil (DSR 2.1.1) 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (DSR 2.6) All kinds of soil (DSR 2.6.1) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(DSR 2.8) All kinds of soil. (DSR 2.8.1) 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (DSR )(DSR 2.25) 5 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (DSR )(DSR 2.25(a)) 6 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (DSR 2.26) All kinds of soil (DSR 2.26.1) 7 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. (DSR )(DSR 2.27) 8 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (DSR 2.28) All kinds of soil (DSR 2.28.1) 9 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (DSR 2.29) All kinds of soil (DSR 2.29.1) 10 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (DSR 2.3) All kinds of soil (DSR 2.30.1) 11 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.31) 12 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.32) 13 Supplying chemical emulsion in sealed containers including delivery as specified. (DSR 2.34) Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (DSR 2.34.1) 14 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2.35.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR 2.35.1.1) 15 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR 2.35.2.1) 16 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR 2.35.3.1) 17 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : 2.35.4 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR 2.35.4.1) 18 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (DSR 2.35.5) 19 Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge. (DSR )(DSR 2.36) 20 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.2) 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.3) 22 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8) 23 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.11) 24 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.2.2) 25 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.2.3) 26 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III)including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)). (DSR 4.2.3A) 27 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). (DSR 4.2.8) 28 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Foundations, footings, bases for columns (DSR 4.3.1) 29 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (DSR 4.3.2) 30 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Columns, piers, abutments, pillars, posts and struts (DSR 4.3.3) 31 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. (DSR 4.4) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.4.1) 32 Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. (DSR 4.5) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) (DSR 4.5.1) 33 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. (DSR 4.6) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.6.1) 34 Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : (DSR 4.7) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.7.1) 35 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. (DSR )(DSR 4.9) 36 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).(DSR )(DSR 4.11) 37 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. (DSR )(DSR 4.12) 38 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (DSR 5.1) C (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.1.2) 39 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (DSR 5.2) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2) 40 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.3) 41 Providing and laying reinforced cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.4) 42 Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.5) 43 Reinforced cement concrete work in chimneys, shafts, up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.6) 44 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). (DSR )(DSR 5.8) 45 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Foundations, footings, bases of columns, etc. for mass concrete (DSR 5.9.1) 46 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DSR 5.9.2) 47 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Suspended floors, roofs, landings, balconies and access platform (DSR 5.9.3) 48 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Shelves (Cast in situ) (DSR 5.9.4) 49 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR 5.9.5) 50 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Columns, Pillars, Piers, Abutments, Posts and Struts (DSR 5.9.6) 51 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Stairs, (excluding landings) except spiral-staircases (DSR 5.9.7) 52 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Chimneys and shafts (DSR 5.9.11) 53 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards(DSR 5.9.13) 54 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like (DSR 5.9.15) 55 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Edges of slabs and breaks in floors and walls 5.9.16 Under 20 cm wide (DSR 5.9.16.1) 56 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Weather shade, Chajjas, corbels etc., including edges (DSR 5.9.19) 57 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.12) 58 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.13) 59 Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR )(DSR 5.15) 60 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (DSR 5.22) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6) 61 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (DSR 5.22A) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22A.6) 62 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) 63 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2) 64 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) 65 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2) 66 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (DSR 6.13) Cement mortar 1:4 (1 cement :4 coarse sand) (DSR 6.13.2) 67 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab upto 0.50 sqm (DSR 8.2.1.1) 68 (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab over 0.50 sqm (DSR 8.2.1.2) 69 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of colour black, Cherry/Ruby red 8.2.2 Area of slab upto 0.50 sqm (DSR 8.2.2.1) 70 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of colour black, Cherry/Ruby red 8.2.2 Area of slab over 0.50 sqm (DSR 8.2.2.2) 71 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of all colour and texture except black, Cherry/Ruby red 8.2.3 Area of slab over 0.50 sqm (DSR 8.2.3.2) 72 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (DSR 8.3) Granite work (DSR 8.3.2) 73 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (DSR )(DSR 8.4) 74 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR )(DSR 8.5) 75 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (DSR )(DSR 8.6) 76 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (DSR 8.14) Red sand stone - exposed face fine dressed with rough backing. 8.14.1 30 mm thick (DSR 8.14.1.5) 77 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : (DSR 8.28) Decorative veneer facings of approved manufacture (DSR 8.28.1) 78 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 18 mm thick (DSR 8.30.1) 79 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 25 mm thick (DSR 8.30.2) 80 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 8.31) 81 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. (DSR )(DSR 8.32) 82 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR 9.1) Sal wood (DSR 9.1.2) 83 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 35 mm thick shutters (DSR 9.5.1.1) 84 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 30 mm thick shutters (DSR 9.5.1.2) 85 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (DSR 9.7) Second class teak wood (DSR 9.7.1) 86 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 35 mm thick (DSR 9.9.1.1) 87 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 30 mm thick (DSR 9.9.1.2) 88 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) (DSR 9.11) 5.0 mm thick(weight not less than 12.50 kg per sqm) instead of 4 mm thick(weight not less than 10 kg per sqm). (DSR 9.11.1) 89 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). (DSR )(DSR 9.12) 90 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). (DSR )(DSR 9.14) 91 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Panelled or panelled & glazed shutters : 9.16.1 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.1.2) 92 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Glazed shutters : 9.16.2 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.2.2) 93 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 12 mm thick (DSR 9.17.1) 94 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 18 mm thick (DSR 9.17.2) 95 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). (DSR 9.18) 18 mm thick (DSR 9.18.1) 96 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). (DSR 9.18) 25 mm thick (DSR 9.18.2) 97 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.20.1) 98 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.20.2) 99 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws (DSR 9.20.3) 100 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.1) 101 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2) 102 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.21.3) 103 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). (DSR 9.25) Decorative type door (DSR 9.25.1) 104 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). (DSR )(DSR 9.26) 105 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters (DSR 9.27.1) with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1 Second class teak wood (DSR 9.27.1.1.1 ) 106 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters (DSR 9.27.1) With ISI marked stainless steel butt hinges of required size 9.27.1.2 Second class teak wood (DSR 9.27.1.2.1) 107 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters (DSR 9.27.2) with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.2.1 Second class teak wood (DSR 9.27.2.1.1) 108 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters (DSR 9.27.2) With ISI marked stainless steel butt hinges of required size 9.27.2.2 Second class teak wood (DSR 9.27.2.2.1) 109 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) 2nd class teak wood 9.40.1 50x12 mm (DSR 9.40.1.1) 110 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) 2nd class teak wood 9.40.1 50 x 20 mm (DSR 9.40.1.2) 111 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x12 mm (DSR 9.40.2.1) 112 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x20 mm (DSR 9.40.2.2) 113 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 20 mm dia (heavy type) (DSR 9.47.1) 114 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 25 mm dia (heavy type) (DSR 9.47.2) 115 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to steel windows by welding (DSR 9.48.1) 116 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to openings /wooden frames with rawl plugs screws etc. (DSR 9.48.2) 117 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 125x90x4.00 mm (DSR 9.56.1) 118 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 100x75x3.50 mm (DSR 9.56.2) 119 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 75x60x3.10 mm (DSR 9.56.3) 120 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 125x65x2.12 mm (DSR 9.57.1) 121 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 100x58x1.90 mm (DSR 9.57.2) 122 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 75x47x1.70 mm (DSR 9.57.3) 123 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 150 mm (DSR 9.59.1) 124 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 125 mm (DSR 9.59.2) 125 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 100 mm (DSR 9.59.3) 126 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 150 mm (DSR 9.60.1) 127 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 125 mm (DSR 9.60.2) 128 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 100 mm (DSR 9.60.3) 129 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 300x16 mm (DSR 9.62.1) 130 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 250x16 mm (DSR 9.62.2) 131 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 250x10 mm (DSR 9.63.1) 132 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 200x10 mm (DSR 9.63.2) 133 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 150x10 mm (DSR 9.63.3) 134 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 100x10 mm (DSR 9.63.4) 135 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378). (DSR )(DSR 9.64) 136 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.65) 300x20x6 mm (DSR 9.65.1) 137 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.65) 250x20x6 mm (DSR 9.65.2) 138 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 125 mm (DSR 9.66.1) 139 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 100 mm (DSR 9.66.2) 140 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 75 mm (DSR 9.66.3) 141 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 150 mm (DSR 9.67.1) 142 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 115 mm (DSR 9.67.2) 143 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 90 mm (DSR 9.67.3) 144 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 125x64x1.90 mm (DSR 9.70.1) 145 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 100X58X1.90 mm (DSR 9.70.2) 146 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 75x47x1.80 mm (DSR 9.70.3) 147 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 50x37x1.50 mm (DSR 9.70.4) 148 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 125x64x2.50 mm (DSR 9.71.1) 149 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 100x60x2.50 mm (DSR 9.71.2) 150 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 75x50x2.50 mm (DSR 9.71.3) 151 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 250x10 mm (DSR 9.74.1) 152 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 200x10 mm (DSR 9.74.2) 153 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 150x10 mm (DSR 9.74.3) 154 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 100x10 mm (DSR 9.74.4) 155 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.76) 156 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.77) 157 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (DSR )(DSR 9.83) 158 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (DSR )(DSR 9.84) 159 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 150 mm (DSR 9.87.1) 160 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 115 mm (DSR 9.87.2) 161 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 90 mm (DSR 9.87.3) 162 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.88) 163 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (DSR )(DSR 9.89) 164 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 40 mm (DSR 9.90.1) 165 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 50 mm (DSR 9.90.2) 166 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 65 mm (DSR 9.90.3) 167 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 75 mm (DSR 9.90.4) 168 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. (DSR )(DSR 9.91) 169 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 125 mm (DSR 9.92.1) 170 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 100 mm (DSR 9.92.2) 171 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 75 mm (DSR 9.92.3) 172 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. (DSR )(DSR 9.93) 173 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 125x63x4 mm (DSR 9.95.2) 174 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 100x63x3.2 mm (DSR 9.95.5) 175 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 75x63x3.2 mm (DSR 9.95.7) 176 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR 9.96) 300x16 mm (DSR 9.96.1) 177 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR 9.96) 250x16 mm (DSR 9.96.2) 178 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 300x10 mm (DSR 9.97.1) 179 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 250x10 mm (DSR 9.97.2) 180 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 200x10 mm (DSR 9.97.3) 181 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 150x10 mm (DSR 9.97.4) 182 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 100x10 mm (DSR 9.97.5) 183 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. (DSR )(DSR 9.98) 184 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (DSR )(DSR 9.99) 185 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 125 mm (DSR 9.100.1) 186 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 100 mm (DSR 9.100.2) 187 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 75 mm (DSR 9.100.3) 188 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR 9.101) Single rubber stopper (DSR 9.101.1) 189 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR 9.101) Twin rubber stopper (DSR 9.101.2) 190 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.103) 191 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. (DSR )(DSR 9.104) 192 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. (DSR )(DSR 9.110) 193 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR 9.114) Triple strip vertical type (DSR 9.114.1) 194 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR 9.114) Double strip (horizontal type) (DSR 9.114.2) 195 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.115) 196 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) (DSR )(DSR 9.116) 197 Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (DSR 9.126) Marine plywood conforming to IS: 710 (DSR 9.126.1) 198 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (DSR 9.127) 1.5 mm thick (DSR 9.127.1) 199 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (DSR 9.127) 1.0 mm thick (DSR 9.127.2) 200 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge (DSR )(DSR 9.129) 201 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :30 mm thick shutters (DSR 9.134.2) With ISI marked stainless steel butt hinges of required size 9.134.2.2 Second class teak wood (DSR 9.134.2.2.1 ) 202 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. (DSR 9.135) With 2nd class teak wood beading 62X19 mm (DSR 9.135.1) 203 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 125 mm (DSR 9.165.1) 204 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 100mm (DSR 9.165.2) 205 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 75 mm (DSR 9.165.3) 206 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). (DSR 9.166) 18 mm thick (DSR 9.166.1) 207 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. (DSR )(DSR 9.167) 208 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)(DSR )(DSR 9.168) 209 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc.complete as per direction of Engineer-in-charge.(DSR )(DSR 9.169) 210 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. (DSR 9.17) 200 mm (DSR 9.170.1) 211 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 9.171) 212 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.172) 213 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensilbasket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) (DSR )(DSR 9.173) 214 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.174) 215 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.1) 216 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.2) 217 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. (DSR 10.1) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR 10.10.1) 218 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. (DSR 10.1) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.10.2) 219 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR 10.15.1) 220 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.15.2) 221 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (DSR 10.16) Electric resistance or induction butt welded tubes (DSR 10.16.3) 222 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. (DSR )(DSR 10.17) 223 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR )(DSR 10.18) 224 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete (DSR 10.25.1) 225 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2) 226 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (DSR 10.26) M.S. tube (DSR 10.26.1) 227 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (DSR 10.26) E.R.W. tubes (DSR 10.26.2) 228 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR )(DSR 10.28) 229 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (DSR 10.29) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides (DSR 10.29.2) 230 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (DSR 10.3) 4.0 mm thick glass panes (DSR 10.30.1) 231 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (DSR )(DSR 10.31) 232 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (DSR 11.1) 1:4 (1 cement : 4 coarse sand) (DSR 11.1.1) 233 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (DSR 11.1) 1:6 (1cement : 6 coarse sand) (DSR 11.1.2) 234 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. (DSR )(DSR 11.2) 235 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 11.3) 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) 236 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. (DSR 11.6) 18 mm thick (DSR 11.6.1) 237 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. (DSR )(DSR 11.7) 238 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. (DSR ) 40 mm wide and 4 mm thick (DSR 11.13.1) 239 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR 11.2) Dark shade pigment using ordinary cement (DSR 11.20.3) 240 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR 11.2) Ordinary cement without any pigment (DSR 11.20.4) 241 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (DSR 11.21) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.1 Acid and alkali resistant tile (DSR 11.21.1.1) 242 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (DSR 11.21) In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.2 Acid and alkali resistant tile (DSR 11.21.2.1) 243 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (DSR 11.23) Udaipur green marble (DSR 11.23.5) 244 Extra for pre finished nosing to treads of steps of marble stone. (DSR )(DSR 11.24) 245 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre. (DSR )(DSR 11.25) 246 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (DSR 11.26) 25 mm thick (DSR 11.26.1) 247 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR )(DSR 11.27) 248 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. (DSR 11.28) Red sand stone (DSR 11.28.1) 249 Extra for Kota stone/ sand stone in treads of steps and risers using single length above normal size up to 2.00 metre. (DSR )(DSR 11.32) 250 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR )(DSR 11.37) 251 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 11.37A) 252 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (DSR )(DSR 11.38) 253 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. (DSR 11.41) Size of Tile 600x600 mm (DSR 11.41.2) 254 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (DSR 11.41A) Double charge vitrified tile polished finish of size 11.41A.1 Size of Tile 600 x 600 mm (DSR 11.41A.1.1) 255 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. (DSR )(DSR 11.45) 256 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (DSR 11.48) Size of Tile 600x600 mm (DSR 11.48.2) 257 Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.30 kg / sqm including grouting thejoints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only.Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400mm of all colours and shades.(DSR )(DSR 11.49A) 258 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. (DSR )(DSR 11.50) 259 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 75 mm (DSR 12.42.1.1) 260 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 110 mm (DSR 12.42.1.2) 261 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (DSR 12.45) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) (DSR 12.45.1) 262 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. (DSR 12.47) 2 mm thick flat (DSR 12.47.2) 263 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (DSR 12.52) 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. (DSR 12.52.4) 264 Providing and fixing tiled false ceiling of specifiedmaterials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (DSR 12.58) 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. (DSR 12.58.1) 265 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: (DSR 12.59) 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. (DSR 12.59.1) 266 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloyIS designation31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). (DSR 12.64) 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. (DSR 12.64.1) 267 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Ridges plain (500- 600mm) (DSR 12.66.1) 268 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Crimp curve (DSR 12.66.5) 269 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Gutter (600 mm over all girth) (DSR 12.66.6) 270 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) 271 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:6 (1 cement: 6 coarse sand) (DSR 13.4.2) 272 12 mm cement plaster finished with a floating coat of neat cement of mix : (DSR 13.7) 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) 273 6 mm cement plaster of mix : (DSR 13.16) 1:3 (1 cement : 3 fine sand) (DSR 13.16.1) 274 Neat cement punning. (DSR )(DSR 13.18) 275 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (DSR )(DSR 13.21) 276 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : (DSR 13.41) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre (DSR 13.41.1) 277 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.46) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.46.1) 278 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (DSR 13.47) New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.47.1) 279 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (DSR 13.48.1) 280 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (DSR 13.48.2) 281 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture (DSR 13.48.3) 282 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadewith silicon additives. (DSR 13.48A) New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (DSR 13.48A.1) 283 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively. (DSR )(DSR 13.59) 284 Lettering with black Japan paint of approved brand and manufacture (DSR )(DSR 13.71) 285 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR )(DSR 13.80) 286 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour(DSR 13.81) Old work (one or more coats) (DSR 13.81.1) 287 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 13.82) One coat (DSR 13.82.1) 288 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 13.82) Two coats (DSR 13.82.2) 289 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (DSR 13.83) One coat (DSR 13.83.1) 290 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (DSR 13.83) Two coats (DSR 13.83.2) 291 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (DSR 13.85) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre (DSR 13.85.1) 292 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (DSR 13.85) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre (DSR 13.85.3) 293 White washing with lime to give an even shade : (DSR 13.87) Old work (two or more coats) (DSR 13.87.1) 294 White washing with lime to give an even shade : (DSR 13.87) Old work (one or more coats) (DSR 13.87.2) 295 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR )(DSR 13.88) 296 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR )(DSR 13.91) 297 Painting with oil type wood preservative of approved brand and manufacture: (DSR 13.97) Old work (one or more coats) (DSR 13.97.1) 298 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (DSR 13.99) One or more coats on old work (DSR 13.99.1) 299 Re-lettering with black Japan paint of approved brand and manufacture. (DSR )(DSR 13.105) 300 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. (DSR )(DSR 13.106) 301 Finishing walls with textured exterior paint of required shade : (DSR 13.11) Old work (One or more coats) applied @ 1.82 ltr/10 sqm. (DSR 13.110.2) 302 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR 13.111.1) 303 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2) 304 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (DSR 13.112) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (DSR 13.112.1) 305 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (DSR 13.112) Old work (one or more coats applied @ 0.83 ltr/10 sqm). (DSR 13.112.2) 306 Varnishing with varnish of approved brand and manufacture: (DSR 13.113) One or more coats with copal varnish (DSR 13.113.1) 307 Melamine polishing on wood work (one or more coat). (DSR )(DSR 13.114) 308 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1.The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) (DSR )(DSR 13.116) 309 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.2) Door chowkhats (DSR 14.2.1) 310 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.2) Window chowkhats (DSR 14.2.2) 311 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. (DSR )(DSR 14.3) 312 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.4) For door/ window/ clerestory window (DSR 14.4.1) 313 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.5.1) 314 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR 14.5.2) 315 Renewing glass panes and refixing existing wooden fillets: (DSR 14.7) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.7.1) 316 Renewing glass panes and refixing existing wooden fillets: (DSR 14.7) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR 14.7.2) 317 Supplying and fixing new wooden fillets wherever necessary: (DSR 14.8) Hollock wood fillets (DSR 14.8.2) 318 Renewal of old putty of glass panes (length) (DSR )(DSR 14.9) 319 Refixing old glass panes with putty and nails (DSR )(DSR 14.10) 320 Fixing old glass panes with wooden fillets (excluding cost of fillets) (DSR )(DSR 14.11) 321 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. (DSR )(DSR 14.12) 322 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR )(DSR 14.17) 323 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. (DSR 14.22) Wheel 50 mm dia and below (DSR 14.22.1) 324 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. (DSR 14.22) Wheel above 50 mm dia (DSR 14.22.2) 325 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (DSR )(DSR 14.23) 326 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Panelled or panelled & glazed shutters : 14.26.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.1.1) 327 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Panelled or panelled & glazed shutters : 14.26.1 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.1.2) 328 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Glazed shutters : 14.26.2 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.2.1) 329 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Glazed shutters : 14.26.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.2.2) 330 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. (DSR )(DSR 14.29) 331 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 125x70x4 mm (ordinary type) (DSR 14.40.1) 332 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 100x70x4 mm (ordinary type) (DSR 14.40.2) 333 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 75x65x4 mm (heavy type) (DSR 14.40.3) 334 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 75x40x2.5 mm (ordinary type) (DSR 14.40.4) 335 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 50x40x2.5 mm (ordinary type) (DSR 14.40.5) 336 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. (DSR )(DSR 14.41) 337 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (DSR )(DSR 14.75A) 338 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. (DSR )(DSR 14.76) 339 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm(DSR )(DSR 14.77) 340 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consistfollowing operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and otherdeposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. (DSR )(DSR 14.78) 341 Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR )(DSR 14.79) 342 Providing & fixing White vitreous china water closet squatting pan (Indian type) along withS or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (DSR 14.8) Orissa pattern W.C Pan of size 580x440 mm (DSR 14.80.2) 343 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 14.81) 344 DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR )(DSR 14.82) 345 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. (DSR )(DSR 14.83) 346 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall (DSR )(DSR 14.84) 347 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (DSR )(DSR 14.85) 348 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (DSR 15.2) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (DSR 15.2.2) 349 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR )(DSR 15.3) 350 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7) In cement mortar (DSR 15.7.4) 351 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): (DSR 15.8) From brick work in cement mortar (DSR 15.8.3) 352 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area 3 sq. metres and below (DSR 15.12.1) 353 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area beyond 3 sq. metres (DSR 15.12.2) 354 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (DSR 15.13) Of area 3 sq. metres and below (DSR 15.13.1) 355 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (DSR 15.13) Of area beyond 3 sq. metres (DSR 15.13.2) 356 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (DSR 15.17) R.S. Joists (DSR 15.17.1) 357 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (DSR 15.17) Channels, angles, tees and flats (DSR 15.17.2) 358 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. (DSR )(DSR 15.18) 359 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.19) 360 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : (DSR )(DSR 15.24) 361 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) G.S. Sheet (DSR 15.28.1) 362 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) Asbestos Cement sheet (DSR 15.28.2) 363 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. (DSR )(DSR 15.36) 364 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (DSR 15.44) 15 mm to 40 mm nominal bore (DSR 15.44.1) 365 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (DSR 15.44) Above 40 mm nominal bore (DSR 15.44.2) 366 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: (DSR 15.45) Up to 150 mm diameter (DSR 15.45.1) 367 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.48) 368 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.49) 369 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR )(DSR 15.52) 370 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres (DSR 15.53) Up to 150 mm diameter (DSR 15.53.1) 371 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. (DSR )(DSR 15.54) 372 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR )(DSR 15.56) 373 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (DSR )(DSR 15.57) 374 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. (DSR )(DSR 15.58) 375 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR )(DSR 15.60) 376 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. (DSR 16.7) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 16.7.1) 377 Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres : (DSR 16.8) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 16.8.1) 378 Supplying at site : (DSR 16.15) R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). (DSR 16.15.1) 379 Supplying at site : (DSR 16.15) Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). (DSR 16.15.2) 380 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. (DSR 16.17) With G.I. barbed wire (DSR 16.17.1) 381 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (DSR 16.18) With G.I. barbed wire (DSR 16.18.1) 382 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (DSR )(DSR 16.19) 383 Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. (DSR 16.31) With medium setting bitumen emulsion 16.31.2 On bituminous surface @ 0.25kg/sqm (DSR 16.31.2.2) 384 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). (DSR 16.33) With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt (DSR 16.33.1) 385 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. (DSR )(DSR 16.40) 386 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. (DSR )(DSR 16.42) 387 Extra for providing and mixing hardening compound of approved quality as per manufacturers specification in cement concrete. (DSR )(DSR 16.44) 388 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) (DSR )(DSR 16.45) 389 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR )(DSR 16.53) 390 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 16.64) 391 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 16.67) 392 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR )(DSR 16.68) 393 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR )(DSR 16.69) 394 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (DSR 16.7) Made of G.I. wire of dia 4 mm (DSR 16.70.1) 395 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). (DSR )(DSR 16.75) 396 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. (DSR )(DSR 16.76) 397 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (DSR 16.78) With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 (DSR 16.78.2) 398 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (DSR )(DSR 16.83) 399 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). (DSR )(DSR 16.84) 400 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR )(DSR 16.89) 401 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR 16.91.1) 402 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (DSR 16.91.2) 403 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR 17.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR 17.1.1) 404 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (DSR 17.2) W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) 405 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (DSR 17.3) W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.3.1) 406 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (DSR 17.7.3) 407 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.4) 408 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked (DSR 17.7.9) 409 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.11) 410 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (DSR )(DSR 17.7A) 411 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: (DSR 17.9) White glazed fire clay kitchen sink of size 600x450x 250 mm (DSR 17.9.1) 412 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (DSR 17.1) Kitchen sink with drain board510x1040 mm bowl depth 200 mm (DSR 17.10.1.3) 413 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (DSR 17.1) Kitchen sink without drain board 17.10.2 610x510 mm bowl depth 200 mm (DSR 17.10.2.1) 414 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (DSR )(DSR 17.15) 415 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (DSR )(DSR 17.16A) 416 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (DSR 17.18) 10 litre capacity - White (DSR 17.18.1) 417 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : (DSR 17.2) White solid plastic seat with lid (DSR 17.20.1) 418 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR )(DSR 17.22A) 419 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia (DSR )(DSR 17.22B) 420 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (DSR )(DSR 17.23) 421 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. (DSR )(DSR 17.24) 422 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 630x450 mm (DSR 17.25.1) 423 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 550x400 mm (DSR 17.25.2) 424 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 450x300 mm (DSR 17.25.5) 425 Providing and fixing kitchen sink including making all connections excluding cost of fittings. (DSR 17.26) White glazed fire clay sink of size 600x450x250 mm (DSR 17.26.1) 426 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Semi rigid pipe 17.28.1 32 mm dia (DSR 17.28.1.1) 427 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Flexible pipe 17.28.2 32 mm dia (DSR 17.28.2.1) 428 Providing and fixing 100 mm sand cast Iron grating for gully trap. (DSR )(DSR 17.29) 429 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. (DSR )(DSR 17.30) 430 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR )(DSR 17.31) 431 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (DSR )(DSR 17.33) 432 Providing and fixing toilet paper holder : (DSR 17.34) C.P. brass (DSR 17.34.1) 433 Providing and fixing toilet paper holder : (DSR 17.34) Vitreous china (DSR 17.34.2) 434 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (DSR 17.69.1) 435 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (DSR 17.69.2) 436 Providing and fixing PTMT Bottle Trap for Wash basin and sink. (DSR 17.7) Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms (DSR 17.70.1) 437 Providing and fixing PTMT Bottle Trap for Wash basin and sink. (DSR 17.7) Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms (DSR 17.70.2) 438 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR )(DSR 17.71) 439 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (DSR )(DSR 17.72) 440 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR 17.73) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (DSR 17.73.1) 441 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR 17.73) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR 17.73.2) 442 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. (DSR )(DSR 17.74) 443 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. (DSR )(DSR 17.75) 444 Providing and fixing PTMT urinal cock of approved quality and colour. (DSR 17.76) 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms (DSR 17.76.1) 445 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. (DSR 17.77) Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) (DSR 17.77.1) 446 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR )(DSR 17.78) 447 Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (DSR )(DSR 17.79) 448 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (DSR )(DSR 17.80) 449 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (DSR )(DSR 17.81) 450 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 20 mm nominal dia Pipes (DSR 18.8.2) 451 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 25 mm nominal dia Pipes (DSR 18.8.3) 452 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 15 mm nominal dia Pipes (DSR 18.9.1) 453 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 20 mm nominal dia Pipes (DSR 18.9.2) 454 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 25 mm nominal dia Pipes (DSR 18.9.3) 455 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 32 mm nominal dia Pipes (DSR 18.9.4) 456 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 40 mm nominal dia Pipes (DSR 18.9.5) 457 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 50 mm nominal dia Pipes (DSR 18.9.6) 458 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 80 mm nominal dia Pipes (DSR 18.9.8) 459 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work (DSR 18.12) 80 mm dia nominal bore (DSR 18.12.8) 460 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (DSR 18.13) 25 to 40 mm nominal bore (DSR 18.13.1) 461 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (DSR 18.13) 50 to 80 mm nominal bore (DSR 18.13.2) 462 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). (DSR )(DSR 18.14) 463 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 15 mm nominal bore (DSR 18.15.1) 464 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 20 mm nominal bore (DSR 18.15.2) 465 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 15 mm nominal bore (DSR 18.16.1) 466 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 20 mm nominal bore (DSR 18.16.2) 467 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 25 mm nominal bore (DSR 18.17.1) 468 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 20 mm nominal bore (DSR 18.17.1A) 469 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 32 mm nominal bore. (DSR 18.17.2) 470 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 40 mm nominal bore (DSR 18.17.3) 471 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 80 mm nominal bore (DSR 18.17.6) 472 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 25 mm nominal bore 18.19.1 Horizontal (DSR 18.19.1.1) 473 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 25 mm nominal bore 18.19.1 Vertical (DSR 18.19.1.2) 474 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 32 mm nominal bore 18.19.2 Horizontal (DSR 18.19.2.1) 475 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 32 mm nominal bore 18.19.2 Vertical (DSR 18.19.2.2) 476 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 40 mm nominal bore 18.19.3 Horizontal (DSR 18.19.3.1) 477 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 40 mm nominal bore 18.19.3 Vertical (DSR 18.19.3.2) 478 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 80 mm nominal bore 18.19.6 Vertical (DSR 18.19.6.2) 479 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 15 mm nominal bore (DSR 18.21.1.1) 480 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 20 mm nominal bore (DSR 18.21.1.2) 481 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 15 mm nominal bore (DSR 18.21.2.1) 482 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 20 mm nominal bore (DSR 18.21.2.2) 483 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (DSR 18.22) 100 mm diameter (DSR 18.22.1) 484 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (DSR 18.22) 150 mm diameter (DSR 18.22.2) 485 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : (DSR 18.27) 100 mm dia pipe (DSR 18.27.1) 486 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : (DSR 18.28) 100 mm diameter pipe (DSR 18.28.1) 487 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : (DSR 18.3) 80 mm diameter pipe (DSR 18.30.1) 488 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : (DSR 18.3) 100 mm diameter pipe (DSR 18.30.2) 489 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : (DSR 18.31) 100 mm diameter 18.31.1 Class I (DSR 18.31.1.1) 490 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : (DSR 18.31) 100 mm diameter 18.31.1 Class II (DSR 18.31.1.2) 491 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR )(DSR 18.48) 492 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (DSR 18.62) 20 mm nominal bore, 120 mm long, weighing not less than 198 gms (DSR 18.62.2) 493 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms (DSR )(DSR 18.63) 494 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms (DSR )(DSR 18.64) 495 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (DSR )(DSR 18.65) 496 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. (DSR 18.84) 15 mm nominal bore (DSR 18.84.1) 497 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : (DSR 19.5) 100 mm diameter (DSR 19.5.1) 498 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (DSR 19.6) 150 mm dia. R.C.C. pipe (DSR 19.6.2) 499 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (DSR 19.6) 300 mm dia. R.C.C. pipe (DSR 19.6.4) 500 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. (DSR 19.32) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.32.1) 501 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. (DSR )(DSR 19.33) 502 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.1.1) 503 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.1.2) 504 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.1.3) 505 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1) 506 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.2.2) 507 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.2.3) 508 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (DSR 21.3.1) 509 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR 21.3.2) 510 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (DSR 21.3.3) 511 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With stainless steel cover plate minimum 1.25 mm thickness (DSR 21.4.1) 512 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With brass cover plate minimum 1.25 mm thickness (DSR 21.4.2) 513 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). (DSR )(DSR 21.5) 514 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. (DSR )(DSR 21.6) 515 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (DSR 21.8) Upto 5mm depth and 5 mm width (DSR 21.8.1) 516 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. (DSR 21.9) For fixed portion (DSR 21.9.1) 517 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. (DSR 21.9) For shutters of doors, windows & ventilators (DSR 21.9.2) 518 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). (DSR )(DSR 21.14) 519 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). (DSR )(DSR 21.17) 520 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR )(DSR 21.18) 521 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11601 (DSR 21.19) Upto 5 mm depth and 5 mm width (DSR 21.19.1) 522 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11602 (DSR 21.19) Upto 10 mm depth and 10 mm width (DSR 21.19.2) 523 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) (DSR )(DSR 22.5) 524 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck ,using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturers specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (DSR )(DSR 22.22) 525 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. (DSR 23.1) All types of soil 23.1.1 300 mm dia (DSR 23.1.1.1) 526 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. (DSR 23.2) All types of soil 23.2.1 350 mm dia (DSR 23.2.1.2) 527 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (DSR 23.3) 150 mm nominal size dia (DSR 23.3.2) 528 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (DSR 23.4) 150 mm nominal size dia (DSR 23.4.2) 529 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.5) 530 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.6) 531 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (DSR )(DSR 23.7) 532 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.8) 533 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR )(DSR 23.12) 534 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: (DSR 23.13) 150 mm dia (DSR 23.13.2) 535 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (DSR 23.14) 150 mm clamp (DSR 23.14.2) 536 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). (DSR 23.15) 150 mm dia (DSR 23.15.2) 537 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. (DSR )(DSR 25.1) 538 Providing and fixing factory madeKitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardenthaving necessary screw holding capacity.Shutter shall be fixed to frame usingapproved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. (DSR )(DSR 26.10) 539 Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : (DSR )(DSR 26.11) 540 Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq mm frls pvc insulated copper conductor single core cable in surface /recessed medium class pvc conduit , with modular switch ,modular plate, suitable GI box and earething the pint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (DSR E&M 1.10)Group A (DSR E&M 1.10.1) 541 Wiring for light/power plug with 2x4 sq. mm FRLS PVC insulatted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR E&M 1.12) 542 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x2.5sq. Mm + 1x2.5 sq. mm eartrh wire (DSR E&M 1.14.2) 543 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x4sq. Mm + 1x4 sq. mm eartrh wire (DSR E&M 1.14.3) 544 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR E&M 1.21) 25mm (DSR E&M 1.21.2) 545 Supplying and fixing 6way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on Surface/recess,complete with tinned copper bus bar, heutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But with MCB/RCCB/Isolator) (DSR E&M 2022 2.3.1) 546 Supplying and fixing 5 amps to 32 amps rating,Single pole, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.10.1) 547 Supplying and fixing 63 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DSR E&M 2022 2.12.2) 548 Supplying and fixing 63 A, four pole, 415V, isolator in the existing MCB DB Complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.13.2) 549 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2022 5.2) 550 Smoke Detector with built in LED, mounting base complete with all connection etc. (DSR E&M 2022 4102) 551 Manual call boxes of MS Type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. (DSR E&M 2022 4103) 552 Manual call boxes of ABS Type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. (DSR E&M 2022 4104) 553 Response indicator on surface/recessed MS Box having two LEDs metallic covers complete with all connections etc.(DSR E&M 2022 4105) 554 Fire alarm sounders (electronic) with facility to make announcement, mounted in M.S. Box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. (DSR E&M 2022 4106) 555 Fire alarm sounders (electronic) with facility to make announcement, mounted in A,B.S. Box with hinged cover plate & suitable for operation with amplifier l/c line matching ttransformer etc. (DSR E&M 2022 4107) 556 Talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. Knob & speaker/microphone enclosed in a M.S (16 SWG)/ABS.Box, break glass in front etc. (DSR E&M 2022 4108) 557 6 Zone fire alarm control panel as per IS: 2189 with backlit LCD (DSR E&M 2022 4110) 558 Cost of25 mm outer dia PVC/ABS Pipe with end caps including making air sampling operning of appropriate dia on appropriate interval. (DSR E&M 2022 4143) 559 Cost of fire survival armoured cable, fibre, fibre glass tape wrapped, ZH inner, outer sheath 2x1.5 sq. mm cable(DSR E&M 2022 4144) 560 Cost of fire alarm armoured FRLS cable 2 x 1.5 sqmm (DSR E&M 2022 4145) 561 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required (DSR E&M 2022 19.1) 562 Concrete with 4cm gauge I class brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) 563 Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20) 564 Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) 565 Brick work in Super structure with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.19) 566 S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) 567 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29 c) 110 mm dia 568 Supply and Fixing of 3 blade wall fan of Havells platina 400 mm or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. (CSI No. 28.37) 569 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38) 570 Supply & fixing steel tubular pole 7 Metre long designated 410 SP-2 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 2018 PWD 603 571 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2018 PWD 641 572 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2018 PWD 642 573 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1131 574 Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1131(A) 575 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1132 576 Same as in item no. 1132 but of 6..5 kg. capacity 2018 PWD 1132 (A) 577 Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge 2018 PWD 1133 578 Supply and fixing of power plug with 15A/250 voltflushtype switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mmsize with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 2018 PWD 1139 579 Supply and fixing ofLED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 2018 PWD 1413(A)CAT AA 580 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. 2018 PWD 1421CAT AA 581 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66Protection complete in all respects.2018 PWD 1425(A)CAT AA 582 Supply and fixing of3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect. 2018 PWD 1441CAT AAA 583 Supply and fixing of 3 Watt to 6 Watt LED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect. 2018 PWD 1441 (A) CAT AAA 584 Supply and fixing ofdecorative 8 to 16 Watt LEDbollard luminaire with driver set confirming to IP 65 protection complete in all respect. 2018 PWD 1442CAT AAA 585 Supply and fixing ofdecorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and aboveprotection complete in all respect.2018 PWD 1443CAT AAA 586 Supply and fixing of 450mm size Exhaust fan of approved quality ISI mark (Bajaj/Havells/Usha/Crompton or equivalent make) complete with all respect as per sample approved by Engineer in charge including supply of all materials, labour and T&P etc requried for proper completion of the work as direction of E/I complete. (NSI ) 587 S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) 588 Supply and fixing of 200 mm Turbo ventilator Fan with ss Chimneycap & pipe of approved quality ISI mark (Bajaj/Havells/Usha/Crompton or equivalent make) complete with all respect as per sample approved by Engineer in charge including supply of all materials, labour and T&P etc requried for proper completion of the work as direction of E/I complete. (NSI ) 589 Providing and fixing 15 mm thick Industrial tiles size 600 x 600 mm to of Johnson Endura Meteor or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(NSI) 590 20-25 mm thick fine dressed Red sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.(NSI) 591 Providing/Laying 20-25 mm thick fine dressed Red sand stone flooring including supply of all materials, labour and T&P required for proper completion of work as perdirection of the Engineer-in charge.(NSI) 592 Providing and fixing prefab structure of size which does not require any structural steel frame at all heights of the existing building with following specifications: Manufactured by Epack polymers pvt ltd /Pronto panels Or Equivalent make.Walls: Outer & Inner walls made of 50 mm thick PUF insulated panels cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. The wall panels shall be connected to each other with Cam Locks @ 1.00 m C/C The walls shall be connected to the the base platform with 1mm thick channels & 100 to 150mm long dash fasteners. The walls & ceiling shall be connected to each other by 1mm thick flashing as per the manufacturer specifications. Any number of vertical partitions are to be provided in the structure as required at site & as per the directions of the E-in-C complete. All the inner / outer gaps, if any, are to be filled with silicon, rubber gasket or any material required complete & directions of the Engineer in charge.Ceiling: Made of 50 mm thick PUF insulated panels cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. The ceiling shall be extended from the wall on all sides by not less than 450mm & not more than 600mm with neccessary slopes in wall as required at the site & directions of the Engineer in charge complete. The outer edges of the roof shall be covered with the channel of the same material as of puff panel.Doors: Made out of 50 mm thick PUF insulated panels inner/outer side cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. complete with providing & fixing all accessories like locks, SS hinges, SS Tower Bolts,SS handles of required size not more than 300mm.Windows: The frame work shall be of aluminium work (Powder coated aluminium (minimum thickness of powder coating 50 micron)) for doors, windows(Sliding/Openable as required with requisite handles, tower bolts,20mm dia SS curtain rod & any other fitting required ), ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be of thickness not less than 14gauge, smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing with 5.50mm thick glass / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. The outer surface shall have fly proof stainless steel grade 304 wire gauge, using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete .Strengthing of door, window, ventilators & any other opening : Any opening provided will have the framework strengthened with 1mm thick MS Plate on all sides all complete & directions of the Engineer in charge.Measurements: Only the floor area of the pre fab outer structure will be measured for payment purpose.Conditions Rates include all lifts, leads, depths, material, labour, scaffolding, all heights for location, carriage, wastage, tools and plants and other all inputs for execution of the item. The colour of the panels for walls & ceiling should be got approved from the E-in-C prior to start of manufacturing of the structure. The Structure requires approx five partitions in the two structures besides two outer walls . Note: The zinc sheet of the puff panels can either be plain/corrugated on both sides or one side plain & one side corrugated upto any pitch in horizontal / verticals per the drawings & requirement at site. 593 Supply,Installation, testing & commissioning Battery 12 V 7 AH Exide or equivalent make for above fire alarm system. Complete as per direction of the Engineer-in charge. 594 Supply,Installation, testing & commissioning Response Indicator Agni Suraksha or equivalent make. Complete as per direction of the Engineer-in charge. 595 Supply,Installation, testing & commissioning Camera (3 MP) colour W Audio IP Dome Secureye or equivalent Indian make ,Lens-3.6mm. Complete as per direction of the Engineer-in charge. 596 Supply,Installation, testing & commissioning Camera (2 MP) IP Dome Falcon series Secureye or equivalent Indian make ,Lens-3.6mm. Complete as per direction of the Engineer-in charge. 597 Supply,Installation, testing & commissioning NVR 8 channelSecureye or equivalent Indian make, with 4TBHDD Hard Disk. Complete as per direction of the Engineer-in charge. 598 Supply,Installation, testing & commissioning Connector D link or equivalent make Complete as per direction of the Engineer-in charge. 599 Supply,Installation, testing & commissioning 8 Port POE Switch Secureye or equivalent Indian make Complete as per direction of the Engineer-in charge. 600 Supply,Installation, testing & commissioning Cable (CAT6) D link or equivalent make Complete as per direction of the Engineer-in charge. 601 Servicing of Air Conditioner (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.30) 602 Servicing of Air Conditioner and filling of GAS (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.31) 603 Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver setcomplete in all respect. 1401 PWD CAT AA 604 Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. 1402 PWD CAT AA 605 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.1406 PWD CAT AA 606 P/F of 30 W orevo make or equivalent make LED light 30 Watt over Hoarding frame along boundary wall of MD DVVNL Campus, 220 KV S/S Sikandra , Agra with necessary materials , labour, T&P etc required for proper completion of the work as per direction of Engineer in charge. (NSI) 607 Providing and fixing of 20 W Philips make or equivalent make LED Tube light 20 Watt with necessary materials labour, T&P etc requried for proper completion of the work as per direction of Engineer in charge (NSI) 608 S/F of 07 Watt LED bulb Syska or other equivalent make including cost of labour, T&P etc required for proper completion of the work (NSI) 609 Supply and fixing of vertical blinds with hanging/sliding rod of aluminium (vista or equivalent make), vertical cord for operation of blinds, L-type hooks, screws, gullies etc. including all T&P, labour etc required for proper completion of the work in all respect. (NSI) 610 Printing name and designation of occupants and other information on residence block/office building including preparation of the base with best quality synthetic enamel paint as directed by E/I including cost of all materials, labour and T&P etc. required for proper completion of work. (NSI) 611 Providing and fixing of Name plate Acrylic/Glow sign Sheet per mm thick without letter as per approved shade and design as per direction of Engineer in charge (NSI) 612 Providing and Pasting of Name plate letter cutting words laser machine without name plate including cost of necessary all fittings such as nut, screws, labour T&P etc requried for proper completion of the work as per direction of Engineer in charge (NSI)
Contract Date: Apr 23, 2026 Contract Value : ₹ 21.94 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
10.
Power #10151996 Price Bid
Rate Contract for preventive / routine / breakdown maintenance of TG and its Auxiliaries for 210 MW, Unit-6, PTPS, Panipat-- 1 Fixed activities (PART-A) 2 FIXED/ ROUTINE/ PREVENTIVE MAINTENANCE ACTIVITIES IN TG & AUXILIARIES OF TGM-IV, 210 MW, Unit-6, PTPS, Panipat 3 Welding works 4 Carbonsteel pipes/ Valves/ Bends / Tees/Vessel etc 5 M.S. pipes/ Valves/ Bends / Tees/Vesseletc 6 Alloy steel pipes/ Valves/ Bends / Tees / Vessel etc 7 Fabrication/Erection of structures by welding process 8 Fabrication of bend/ reducer 9 VALVES 10 Servicing/ overhauling of Valves/ NRV 11 Replacement of gasket in bonnets of valves >6 12 Replacement of valves (butt/flanged)>4 13 Attending of steam/ water/ oil/ gas/ air leakages from flanges with replacement of gasket >6 14 Mechanical works of Electrical Actuators 15 Servicingof actuators 16 Replacement of actuators 17 Replacement of bearing/ bush/ Gear of actuators 18 LP Heaters (3 Nos.)/ HP Heaters (2 Nos.) 19 Arresting condensate water/ feed water leakage 20 Checking/ Rectification the Internals of LPH/ HPH 21 GSC (1 Nos.) 22 Attending of water leakage/gasket replacement 23 Attending of tube leakage 24 Drain Cooler (1 Nos.) 25 Replacement of flange gasket 26 Attending of tube leakage 27 STATOR WATER PUMPS (2 Nos.), HOTWELL MAKE UP PUMPS (2 Nos.), BOILER FILL PUMP (1 Nos.), JOCKEY PUMPS (2 Nos.) 28 Replacement of mechanical seal 29 Replacement of Coupling of Pump-Motor 30 Replacement of coupling bush/ rubber pads 31 Servicing/ overhauling of pump 32 Deareator (1 No.) 33 Replacement of gaskets of man hole 34 Checking/ Rectification the Internals of Deareator 35 SUCTION STRAINERS 36 Cleaning of suction strainer of TLOCB pumps/ H2CB 37 Cleaning of suction strainer of BFP/ CEP 38 Cleaning of suction strainer of fire/ emulsifier/ jockey 39 BOILER FEED PUMPS (03 Nos.) 40 Alignment ofBooster pump & motor 41 Checking/replacement of BFP/ BP thrust brg 42 Mech. Seal replacement of BFP/ Booster pump 43 Suction ‘O’ ring replacement 44 Discharge ‘O’ ring replacement by removal of cartridge 45 Alignment checking, correction of motor & Hydraulic 46 Alignment checking/ correction Hyd Coupling & BFP 47 Attending parting plane leakage of Booster pump 48 Replacement of BFP cartridge 49 Cooling jacket cleaning BFP/ Booster pump 50 Checking of bearing of hydraulic coupling 51 BFP LUBE OIL/ WORKING OIL COOLER/ SEAL WATER COOLER(15 Nos) 52 Cleaning of coolers 53 Replacement gasket/ o-ringof coolers 54 Attending of tube leakage 55 MECHANICAL WORKS FOR BFP MOTOR 56 Decoupling & Coupling 57 Replacement of bearing & alignment 58 COLONY POTABLE PUMPs (5 Nos.), FILTER BACKWASH PUMPS (3 Nos.), POTABLE CLARIFIER PUMPS (3 Nos.) and associated system 59 Decoupling/ coupling 60 Overhauling of Colony potable Pump 61 Replacement/Servicing of bearing/ housing of colony potable pump 62 Overhauling of Filter Back wash Pump 63 Replacement/Servicing of bearing/ housing of Filter Back wash pump 64 Overhauling of Potable Clarifier Pump 65 Replacement/Servicing of bearing/ housing of Clarifierpump 66 Overhauling/ servicing of potable air blower 67 CEPs (02 Nos.) 68 Decoupling & Coupling 69 Checking & replacement ofCEP Thrust Bearing includinglifting & placement ofCEP motor 70 Replacement of CEP cartridge assembly 71 C.W. PUMPS (03 Nos.) 72 Decoupling & Coupling 73 Checking & replacement ofpump Thrust Bearing 74 BCW PUMP#5 (4 Nos.), BCW DRAIN PUMPS #5 (4 Nos.) 75 Decoupling & Coupling 76 Checking & replacement ofBCW pump thrust bearing including lifting/ replacement of motor 77 Servicing/ overhauling of BCW Pump/ bowl assembly including lifting & placement of motor 78 Checking & replacement ofBCW drain pump thrust bearing including lifting/ replacement of motor 79 Servicing/ overhauling of BCW drain Pump/ bowl assembly including lifting & placement of motor 80 RAW WATER PUMPS (07 Nos. i.e. 03 Nos. of Unit-6, 03 nos. of Unit-5 & 01 No. of Unit-1 to 4) 81 DECOUPLING & COUPLING. 82 Checking & replacement ofpump thrust bearing 83 Servicing/ overhauling of Pump 84 H2CB PUMP (2 Nos.), BACW PUMPS (3 Nos.), SERVICE WATER PUMP#5 (2 Nos.), SERVICE WATER#6 (3 Nos.), CLARIFIER PUMPS#5 (3 Nos.) 85 Decoupling & coupling 86 Replacement of coupling bushes/ rubber pads 87 Checking & replacement ofpump bearing 88 Servicing/ overhauling of Pump 89 VERTICAL SUMP PUMPS (2 Nos.), CABLE TRENCH PUMPS #5&6 (03 Nos. + 03 No.) 90 Decoupling & coupling 91 Checking & replacement ofpump bearing 92 Overhauling/ Servicing of pump 93 TLOCB PUMPS (2 Nos.), FIRE HYDRANT PUMPS (2 Nos.), EMULSIFIER PUMPS (2 Nos.), DIESEL FIRE HYDRANT PUMPS (2 Nos.), DIESEL EMULSIFIER PUMPS (2 Nos.) 94 Decoupling & coupling 95 Replacement of coupling bushes/ rubber pads 96 Checking & replacement ofpump bearing 97 Servicing/ overhauling of Pump 98 CONDENSER (01 Nos.) 99 Attending of Inlet/ outlet line manhole leakage 100 Attending of condenser Tube leakage 101 Condenser cleaning using air 102 CONDENSER VACUUM PUMP (2 Nos.) 103 Bearing checking and replacement 104 Cleaning of vacuum pump coolers 105 Replacement of O-ring/ Gasket ofvacuum p cooler 106 Attending of tube leakages of vacuum pump cooler 107 EOT CRANE of TG Hall/ CW System/ RWP House/ MISC. Pump House/ Compressor House etc. 108 seals replacement 109 Bearing replacement for main hoist / aux. hoist of 125/25T EOT 110 Bearing replacement for long travel/ cross travel of 125/25 T EOT 111 Bearing replacement of CW system/ Compressor/ Misc. pump house/ RWP house 112 TRENCH/ DRAIN PUMPS (04 Nos.), MISC. OIL PUMPS (02 Nos.), and RECIRCULATION PUMPS OF CONDENSER VACUUM PUMP (2 Nos.) 113 Decoupling & coupling 114 Servicing of pump 115 GLAND STEAM/ MOT OIL VAPOUR/ BEARING CHAMBER EXHAUST FAN (6 Nos.) 116 Coupling/ decoupling 117 Servicing/ Replacement of impeller 118 MOT CENTRIFUGE 119 Replacement of bottom ‘O’ ring/ bearing. 120 Replacement of oil seal 121 Suction / Booster gear pump coupling 122 Centrifuge coupling bush or shoe pad replacement 123 Repair/ replacement of bowl gear /gear pumps/heater 124 Servicing of centrifuge in presence of service engineer 125 AOP (2 Nos.)/ JOP (01 No. AC, 01 No. DC)/ EOP (01 No. AC, 01 No. DC ) 126 Servicing of pump 127 Replacement of pump 128 Coupling/ decoupling 129 Turbine Oil Coolers 130 Replacement of O-ring 131 Gasket replacementwater side 132 Vent valve/ equalizing valve replacement 133 Seal Oil Pump (2 No. AC & 1 No. DC), Seal Oil Vacuum Pump (2 Nos.), Seal Oil Coolers 134 Seal Oil Pump servicing/ replacement 135 Seal Oil vacuum pump servicing 136 Seal Oil Vacuum pump replacement 137 GOVERNING RACK/ LP BYPASS RACK 138 Replacement ofHC/ EHC/ MTV etc. of main governing rack/ Pressure switch/ Vacuum switch/ EHC/ Limiter etc. of LP Bypass rack 139 Replacement of oil seal/ o-ring water injection system 140 HP BYPASS SYSTEM 141 Replacement ofN2 Bladder (30L/ 10L) / associated 142 Replacement ofOSU Pump/ Spares inside OSU tank 143 Replacement of coupling bush of OSU pump 144 AIR COMPRESSORS- 10 Nos. (SAC of Unit 5 -04 Nos., IAC of Unit 5 -03 Nos. & IAC of Unit 6 -03 Nos.) 145 Replacement of gasket/ O-ring of inter/ after cooler 146 Replacement of bearing ring of LP/ HP piston 147 Servicing/ overhauling of LP/ HP cylinder assembly 148 Complete servicing of comp under supervision of OEM 149 Replacement of motor pulley/ compressor flywheel 150 Checking/attending water leakage from LP/ HP jacket 151 Checking/attending water leakage inter/ outer coolers 152 Replacement of silica gel of air dryer 153 CHLORINATION (40 kg/hr & 150Kg/hr) 154 Replacement ofHPDPE pipesup to 6 155 Replacement of PVC pipes 156 Replacement of GI pipes 157 Replacement of valves/ flanges 158 Servicing of Chlorinator ejector 159 Replacement of RVR/ Ejector/ Filter assembly 160 CLARIFIER BRIDGE #3&4, CLARIFIER BRIDGE #5, CLARIFIER BRIDGE #6 and associated system 161 Replacement of center bearing of clarifier bridges 162 Overhauling/ servicing of Clariflocculator 163 Replacement of bearing of Driving/Driven of main drive 164 Overhauling/ servicing of Sludge valve 165 Complete Overhauling of Main Drive system 166 Overhaulingof sluice gate shutter of bridge/Clear well 167 ALUM DILUTION AGITATORS- 5 Nos. (03 Nos. of U-5 & 02 Nos. of U-6) 168 Decoupling & coupling 169 Replacement/ servicing of gear mechanism 170 Servicing/ overhauling of agitator 171 MISCELLANEOUS WORKS 172 Replacement oflocal gauge glasses 173 LP Turbine diaphragm replacement 174 Visit of crane operator during odd hrs (4hrs/visit) for non-critical jobs 175 Painting works on piping/ equipments/ structures 176 Naming works (nomenclature) on piping/ equipments/ sites 177 Dismantling of usable material from phased out Unit of PTPS for the use of Unit-6
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Haryana View Result →
11.
Communications and Information Technology  #10092844 Price Bid
Day To Day Maintenance, Special Repairs, Petty Works And Other Miscellaneous Works Of Staff Quarters Compound At Nacharam, Hyderabad. ( 5Th Call ) . - 1 Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Up To 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : 2 A ) All Kinds Of Soil. 3 I ) Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia 4 Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50M Outside The Periphery Of The Area Cleared. 5 Felling Trees Of The Girth ( Measured At A Height Of 1 M Above Ground Level ) Including Cutting Of Trunks And Branches, Removing The Roots And Stacking Of Serviceable Material And Disposal Of Unserviceable Material. 6 A ) Beyond 30 Cm Girth Up To And Including 60 Cm Girth 7 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 8 A ) 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 9 Providing And Fixing Aluminium / Brass Sliding Door Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete : 10 A ) 250X16 Mm 11 Providing And Fixing Aluminium Tower Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : 12 A ) 300X10 Mm 13 B ) 150X10 Mm 14 Providing And Fixing Aluminium Handles Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : 15 A ) 100 Mm 16 Providing And Fixing To Existing Door Frames. 17 A ) 30 Mm Thick Factory Made Polyvinyl Chloride ( Pvc ) Door Shutter Made Of Styles And Rails Of A Upvc Hollow Section Of Size 60X30 Mm And Wall Thickness 2 Mm ( ± 0.2 Mm ) , With Inbuilt Decorative Moulding Edging On One Side. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised / Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 25X20 Mm And 1 Mm ( ± 0.1 Mm ) Wall Thickness. The Lock Rail Made Up Of ‘H’ Section, A Upvc Hollow Section Of Size 100X30 Mm And 2 Mm ( ± 0.2 Mm ) Wall Thickness Fixed To The Shutter Styles By Means Of Plastic / Galvanised M.S. ‘U’ Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm ( ± 18 0.1 Mm ) Wall Thickness . The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturer’S Specification And Direction Of Engineer-In-Charge. 19 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 20 A ) Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of C.C. 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) . 21 White Washing With Lime To Give An Even Shade : 22 A ) Old Work ( One Or More Coats ) . 23 Distempering With Dry Distemper Of Approved Brand And Manufacture ( One Or More Coats ) And Of Required Shade On Old Work To Give An Even Shade. 24 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 25 A ) One Or More Coats On Old Work. 26 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 27 A ) Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) . 28 Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side, Up To Seven Story Height Made With 40Mm Dia. M.S. Tube 1.5M Centre To Centre Horizontal & Vertical Tubes Joining With Cup & Lock System With M.S. Tubes, M.S. Tube Challies, M.S. Clamps And M.S. Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For The Required Duration As Approved And Removing It There After. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connection With The Building Etc. Wherever Required For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc. Complete As Per Directions And Approval Of Engineer-In-Charge .The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose. The Payment Will Be Made Once Irrespective Of Duration Of Scaffolding. 29 Note: - This Item To Be Used For Maintenance Work Judicially, Necessary Deduction For Scaffolding In The Existing Item To Be Done. 30 Demolishing Lime Concrete Manually / By Mechanical Means And Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer In-Charge 31 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge. 32 A ) Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 33 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm Ptmt Pillar Cock, 32 Mm Ptmt Waste Coupling Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm Ptmt Pillar Cock. 34 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings Andfixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 35 A ) W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 36 Providing And Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) : 37 A ) Orissa Pattern W.C. Pan Of Size 580X440 Mm 38 Providing And Fixing Mirror Of Superior Glass ( Of Approved Quality ) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6 Mm Thick Hard Board Backing : 39 Rectangular Shape 453X357 Mm 40 Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 41 100 Mm Inlet And 75 Mm Outlet 42 Sand Cast Iron S&S As Per Is- 1729. 43 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. : Internal Work - Exposed On Wall 44 A ) 20 Mm Nominal Outer Dia. Pipes. 45 B ) 25 Mm Nominal Outer Dia .Pipes. 46 C ) 40 Mm Nominal Outer Dia. Pipes. 47 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge : External Work 48 A ) 25 Mm Nominal Outer Dia. Pipes. 49 B ) 40 Mm Nominal Outer Dia. Pipes. 50 Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : 51 A ) 25 To 40 Mm Nominal Bore 52 Providing And Fixing Cpvc Union / Cpvc Nepple In G.I / Cpvc Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) 53 A ) 20 Mm Nominal Bore 54 B ) 25 Mm Nominal Bore 55 C ) 40 Mm Nominal Bore 56 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 57 Providing And Fixing Ptmt Extension Nipple For Water Tank Pipe, Fittings Of Approved Quality And Colour. 58 A ) 25Mm Nominal Bore. Weighing Not Less Than 62 Gms. 59 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 ( 1 Cement : 1 Fine Sand ) Including Testing Of Joints Etc. Complete : 60 A ) 100 Mm Diameter 61 B ) 150 Mm Diameter 62 Providing And Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design: 63 A ) 100 Mm Diameter S.W. Pipe 64 B ) 150 Mm Diameter S.W. Pipe 65 Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : 66 ( A ) First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. 67 ( B ) Second Layer Of Slurry Of Cement @ 0.242 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. 68 ( The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. ) 69 Providing And Fixing At All Floors Type B - Swr Pvc Pipes Of Approved Makeincluding All Fittings Such As Plain And Door Bends, Tees, Elbows, Equal And Unequal Junctions, Heel Rest Sanitary Bends, Collars Etc. ( Except Floor Traps / P Traps ) Confirming To Is13592, Is 14735, Including Jointing With Solvent And Providing Necessary Supports, Clamps / Ms Brackets At Specified Intervals. The Joints Of Pipe And Fittings Shall Be Of Drip Seal Jointingin Exposed Areas Like In Shafts Etc.And Pasted Type ( Solvent ) For All Other Locations All Complete And As Per Directions Of Engineer - In - Charge.Ms Brackets Shall Be Paid Separately 70 I ) 75Mm 71 Ii ) 100Mm 72 Removing Glass Panes From Windows And Replacing Them With New Glass Panes With Putty And Nails Wherever Necessary : Float Glass Panes Of Thickness 4Mm 73 A ) For Windows In Ground Floor And / Or For Windows Which Can Be Accessed From Inside Of The Room / Bolcony With Ladder Arrangement Wherever Necssary. 74 B ) For Windows In Upper Floors ( Other Than Ground Floor ) Up To 8 Floors With Necessary Jhoola Arrangement 75 Charges For Minor Repairs To Wooden Panelled / Flush Doors / Window Setc., . Cost Includes All Labour For Attending Minor Repairs Like Sides Planing For Proper Functioning And Refixing Screws After Attending Necessary Repairs Etc., With Necessary Screws, Nails Etc., Complete ( Cost Of Wood Will Be Paid Separately, But I / C Required Screws ) 76 A ) Wooden Door / Window / Cupboards 77 Cleaning Of Canopy / Chajjas By Removing Leaves Grass Dust, Rubbish And Other Deposited / Accumulated Materials Etc Including Removal Of Blockages / Chockages Of Khurras / Spouts Of Terrace / Chajjas Etc By Disposal Of Rubbish To The Dumping Ground Out Side Periphery Of The Building. ( Plan Area Of Thechajja / Canopy Will Be Measured For Payment ) 78 A ) Blocked Chajas, Inaccessible Canopy & Like Upto First Floor Level . 79 B ) Blocked Chajas, Inaccessible Canopy & Like Above First Floor Level . 80 Charges For Cleaning Of Terrace Slab, Rain Water Entry Spouts, Khurras / Depressions / Sunk Slabs And Surrounding Areas Etc., By Removing Leaves, Silt, Grass, Dust, Rubbish, Small Plants And Other Deposited / Accumulated Materials From Terrace Etc., For Smooth Flow Of Water Including Disposal Of Waste Etc., Complete As Per The Directions Of Engineer-In-Charge. ( Entaire Terrace Of One Buildingshall Be Measured For Payment ) . 81 Charges For Repairs To Wooden Windows By Removing And Changing The Required Wooden Panels And Making Repairs To Walls With The Cement Plaster And Providing Required Hold Fasts Etc., All Complete As Per The Directions Of The Engineer-In-Charge. 82 Charges For Arranging Carpenter / Plumber Along With Helper Whereever Required For Attending Minor Repair Works In The Compound Etc., Complete As Directed By The Engineer-In-Charge. ( The Required Fittings & Fixtures Exept Screws / Nails, Drilling Etc.Shall Be Paid Separately And Measured For Each Half Day ) 83 Removing The Damaged Sanitary And Water Supply Fittings And Replacing Them With New Fittings Including Necessary White Lead / Lead Wool Etc Complete As Directed By The Engineer In Charge. 84 A ) P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete.10 Litre Capacity - White 85 B ) P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete.Semi Rigid Pipe 86 I ) 32 Mm Dia 87 C ) Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour. 88 I ) 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms. 89 D ) Uplasticised Pvc Connection Pipe 15 Mm Nominal Boreand 45 Cm Length With Brass Unions : 90 E ) C.P. Brass Shower Rose 100 Mm Diameter With 15 Or 20 Mm Inlet : 91 F ) Ptmt Bib Cock 15Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms.Of Approved Quality And Colour. 92 G ) Ptmt Stop Cock15 Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms. Of Approved Quality And Colour. 93 H ) Ptmt Pillar Cock15mm Nominal Bore, 107 Mm Long. Weighing Not Less Than 110 Gms. Of Approved Quality And Colour . 94 I ) Ptmt Grating 100 Mm Nominal Dia.Circular Type. Of Approved Quality And Colour. 95 J ) 50Mm Dia C.P. Waste Coupling For Kitchen Sink.With New Washer 96 K ) Ball Valve ( Brass / Cpvc ) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : 97 I ) 20 Mm Nominal Bore 98 Ii ) 25 Mm Nominal Bore 99 Iii ) 40 Mm Nominal Bore 100 L ) C.P. Brass Bib Cock 15 Mm Nominal Bore. Of Approved Quality Conforming To Is:8931: 101 M ) C.P. Brass Stop Cock 15 Mm Nominal Bore.Of Standard Design And Of Approved Make Conforming To Is:8931. 102 N ) C.P. Brass Pillar Cock 15 Mm Nominal Bore.Of Standard Design And Of Approved Make Conforming To Is:8931. 103 O ) Health Pauset Set With Wall Support Lever Of 15Mm Nominal Bore Stainless Steel / Cp Brass Nozzle Jet And Handle Of Approved Quality And Make For Ewc 104 P ) C.P. Brasstwo In One Bib Cock 15 Mm Nominal Bore. Of Approved Quality Conforming To Is:8931: 105 Q ) Solid Plastic Seat With Lid For Pedestal Type W.C. Pan Complete :White Solid Plastic Seat With Lid 106 Repairs To Existing Pvc Flushing Cisterns As Per Directions Of Engineer-In-Charge. 107 A ) Attending Repair To Flushing Cistern By Replacing Suitable Internal Siphon System Set ., For Proper Functioning Of Cistern 108 Cleaning Of Sewer Lines, Manholes Etc., At All Depths. Cost Includes All Labour For Removing The Sludge, Silt, Slush, Waste Etc., From The Manholes And Rodding The Sewer Lines By Mobile Sewer Roding Equipment From Manhole To Manhole To Clear The Blockage, Including Chokes In Gully Traps Etc.And Disposing The Waste Outside The Compound Etc., 109 Providing Clog Cleaning Of Entair Drainage System In The Compound Consisting Of Manholes, Sewer Lines, Gully Traps Etc., Including Removing The Sludge, Silt, Slash, Waste Etc., From The Manholes And Disposing The Waste Out Side The Compound Etc., Complete As Per The Direction Of The Engineer-In-Charge. ( Rate For Cleaning Of Entair Drainage System Will Be Measured As One Job ) 110 Cleaning Of Open Drainage System In The Compound Including Removing The Sludge, Silt, Slash, Waste Etc., From The Drains And Disposing The Waste Out Side The Compound Etc., Complete As Per The Direction Of The Engineer-In-Charge. ( Rate For Cleaning Of Entair Open Drainage System Will Be Measured As One Job ) 111 Cleaning Of The Surroundings Of The Staff Quarters Block Including Removing The Dust, Dead Leaves, Silt, Waste Etc., And Disposing The Waste Out Side The Compound Etc., Complete As Per The Direction Of The Engineer-In-Charge. 112 Cleaning Of Choked Wcs ( Indian / European ) And Ensuring Smooth Flow Etc., Complete 113 Cleaning Of Nahni Traps / Floor Traps At All Levels For Removal Of Blockages Including Removing The Silt, Slush, Waste Etc Ensuring Smooth Flow Etc And Applying White Cement In Tile Joints Of Bath / Wc Including Water Proofing Compounds ( Like Forsroc ) Etc Wherever Required To Arrest Leakages Etc. 114 Cleaning Of The Choked Gully Trap Chambers And Sewer Line Upto Next Manhole From The Water Entry Outlet Point In Drainage System Using Rodding, Wire / Cables Etc., To Remove All The Waste, Debris Etc., Including Disposal Etc., As Per The Directions Of Engineer-In-Charge 115 Cleaning Of Existing Sanitary Pipe Alignment Of 150 / 100 / 75 Mm Dia In Vertical Or Horizontal Direction Of Existing All Floors By Opening Door Tee / Bend At Each Floor , Clearing The Deposited Obstacles Including Rodding And Refixing The Doors With New Rubber Washer And Jointing The Same Job Includes Replacing Door Covers, Bolts And Nuts Wherever Required To Arrest The Leakage All As Per Directions Of Engineer-In-Charge ( Each Opening Of Door Bend And Removal Of Blockages Including Above Operation Will Be Measured As One Job. ) 116 Cleaning Of Existing Over Head Tank / Underground Water Storage Tank By Mechanical Method Of Specified Tankclean Process In Stages: ( 1 ) Empty The Tank / Sump And Make It To Near Dry, ( 2 ) Wash The Tank Internal Surfaces And Top Of The Tank With Fresh Water And Clean / Rinse The Inside Surfaces Of Side Walls, Ceiling And Floor Surfaces Perfectly By Removing All Scalling, Fungus Etc., With Rotary Jet Mechanism, ( 3 ) Removing / Cleaning Mud, Silt, Waste, Sludge And Garbage From The Tankwith Sludge Pump / Vaccum Cleaner And Disposing Outside The Building, ( 4 ) After Drying Applt Uv Radiation With Specified Equipment In The Tank For 15 Minutes To Kill The Harmfull Bacteria Etc., Complete All As Per Directions Of The Engineer-In-Charge. 117 ( The Rate Includes Filling Of Outlets Of Tank With Cotton During Cleaning Marking Of Date Of Painting On The Tanks And Cleaning Of All The Dirt / Waste Etc., From The Terrace And Submission Of Certificate From Specialised Agency ) . 118 Uprooting & Removal Of Vegetation At Walls / Roofs / Chajjas And Floors / Drainage Systems / Water Supplying Stream Of The Building / Over Head Tanks Or At All Levels, Any Location And Applying Any Special Chemical To Defective Area To Prevent Vegetation Growth And Finishing The Same With Cement Concrete / Mortar To Match The Surface Of Walls / Floors / Roofs., Etc Complete As Per The Directions Of Engineer-In-Charge ( Cement Concrete / Mortar To Be Paid In Separate Item. ) ( Uprooting Of Vegetation In Each Location Will Be Measured As One Job ) 119 A ) Up To Floor Two Level 120 B ) Above Floor Two Level 121 Pruning / Cutting Branches Of Trees At All Levels For Avoiding Entering Houses And Obstructing Colony Lighting And Electrical Wire Free Passing And Disposing The Cutting Pieces Away From The Compound To The Dumping Ground As Directedby The Engineer-In-Charge. 122 Providing And Filling Cement Motar Sanded Grout Mixed With Fosrock Liquid Water Proofing Compound In Required Quantity For Grouting / Filling Around The Gaps Of Iwc, Floor Traps Sides And Inside Traps Including Finishing The Sides Neately And Grouting In Holes At Door Bottoms Etc., Complete In The Toilet Rooms To Fill The Holes Terrazo / Ceramic Flooring Tiles, Around The W.C.Pans, Corners Of Rooms, Floor Trap Openings After Neatly Cleaning / Scraching The Joints Etc., 123 In All Floors Complete As Per Directions Of Engineer-In-Charge. ( No. Of Bath / Wc Rooms Shall Be Measured For Payment ) 124 Removing The Broken Pipe / Coupling From The Water Line, Cutting To Required Size, Replacing With Suitable Upvc Pipe / Upvc Coupling With The Help Of Solution And Refixing The Pipe In Original Position On Emergency Basis ( Breakdown Operartion ) Complete As Directed By The Engineer-In-Charge. 125 Charges For Making Available The Welding Plant At Site Including To And From The Shoap, Providing Necessary Power Supply Arrangements, Lugs Etc., Complete As Per The Direction Of Engineer-In-Charge. 126 Charges For Removing Pvc Water Tanks From Position And Cleaning The Surroundings And Chipping Off Any Malba Existing Arround The Tank And Making Good The Surroundings With White Cement Complete As Per The Direction Of Engineer-In-Charge. 127 Rebate For Taking Away The Unserviceable Pvc Water Storage Tank & Fittings Including Removing From The Existing Position . Etc., Complete. 128 Rebate For Taking Away The Unserviceable Sanitary / Water Supply Fittings Including Removing From The Existing Position . Etc., Complete. 129 A ) Gi Pipes 15Mm / 20Mm / 25Mm / 32Mm / 40Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Telangana View Result →
Uttar Pradesh View Result →
13.
Defence #9835139 AOC
Tender For Completion Of Incomplete Work For Provn Of Otm Accommodation (Ph-I Of Two Phs) At Panagarh Mil Stn Under Ge (P) Panagarh.; 1 Sch A Part -I (Building Works)Note:- This Sch is notpre-priced by MES and the pre-priced rate indicatedas Rs 0.00 under Col 5 signifies this fact only. 2 Completion of incomplete Building for signal unit with all fitting and fixtures etc. Complete all as specified and as shown on complete drawings. 3 Completion of incompleteBuilding for office accn/ Adm block with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 4 Completion of incomplete Building for JCO Mess and single living JCO accn with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 5 Completion of incomplete Buildingfor single living ORs accn / Dinning and cook house with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 6 Completion of incomplete Building for Storage Accn (Armouries)& Guard House alongwith hardstanding with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 7 Completion of incomplete Building for Store Room (General Authorisation) with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 8 Completion of incomplete ramp with all fitting and fixtures etc. Complete all as specified and as shown on drawings 9 Completion of incomplete Building for sentry post with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 10 Completion of incomplete Building for Ironing Room with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 11 Completion of incomplete Building for Meter & Switch House with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 12 Completion of incomplete Pump House/ UG water tank with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 13 Completion of incomplete RCC OHT Tankwith 18mtr staging with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 14 Completion of incomplete Incinerator with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 15 Completion of incompleteFlag mast with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 16 Completion of incomplete Alarm post with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 17 Completion of incompleteFire point with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 18 Completion of incomplete Refuse bin with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 19 Completion of incompleteDhobi ghat with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 20 Lumpsum price worked out by the tenderer/ bidder for SITE CLEARENCE, AREA DEVELOPMENT, EARTH WORK AND EXCAVATIONas listed in Schedule ‘A’ Part-II on Serial Page No. __ 21 Lumpsum price worked out by the tenderer/ bidder for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III on Serial Page No. __ 22 Lumpsum price worked out by the tenderer/ bidder for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV on Serial Page No. __ 23 Lumpsum price worked out by the tenderer/ bidder for ROAD/ PATH/ CULVERT as listed in Schedule ‘A’ Part-V on Serial Page No. __ 24 Lumpsum price worked out by the tenderer/ bidder for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI on Serial Page No. __ 25 Lumpsum price worked out by the tenderer/ bidder for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VII on Serial Page No. ___ 26 Lumpsum price worked out by the tenderer/ bidder for SECURITY FENCING AND GATE as listed in Schedule ‘A’ Part-VIII on Serial Page No. ___ 27 Lumpsum price worked out by the tenderer/ bidder for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX on Serial Page No. ___ 28 Lumpsum price worked out by the tenderer/ bidder for EXTERNAL ELECTRIC SUPPLYas listed in Schedule ‘A’ Part-X on Serial Page No. ___ 29 Lumpsum price worked out by the tenderer/ bidder for LIGHTENING PROTECTIONas listed in Schedule ‘A’ Part-XI on Serial Page No. ___ 30 Lumpsum price worked out by the tenderer/ bidder for RAIN WATER HARVESTING / RECHARGE PIT as listed in Schedule ‘A’ Part-XII on Serial Page No. ___ 31 Schedule ‘A’ Part-XIII (MISCELLANEOUS ITEMS)Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under Col. 5 signifies this fact only. 32 M & L for mixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e10 %Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting with vibratory roller to get min CBR value 8% and Dry density 97 % placed at required camber and gradient complete as directed .Note:Break down details of this Items is shown in Annexure ‘B’ in Schedule ‘A’ Notes. 33 (INTERNALELECTRIFICATION)Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduitheavy grade of adequet size dia with all fittings and accessories for modules switch/socket etc in metal flush box screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point / call bell point controlled by one, one way switch complete all as specified and as directed. 34 All as per Ser Item No 13.02 here-in-above but for one ceiling/ exhaust fan point controlled by one switch complete all as specified and directed. 35 Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduitheavy grade of adequet size with all fittings and accessories for modules switch/socket etc in metal flush box modular with cadmium plated iron screws completeincluding PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one 5/6 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed. 36 All as per item No. 13.04 above but one 5/6amps socket outlet point on the same board with other switches complete all as specified and as directed. 37 All as per item No. 13.02 above but for one Point wiring controlled by two nos two switch complete all as specified and as directed. 38 Material and labour for point wiring with 4sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduitheavy grade of adequet size with all fittings and accessories for modules switch/socket etc in metal flush box modular with cadmium plated iron screws completeincluding PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 4 sqmm green colour as earth continuty conductor connected to common earth dolly for one15/16 Amps socket outlet points controlled by one, one way switch modular type on independent board complete all as specified and as directed. 39 Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed stove enameled steel conduit of adequet size dia with all fittings and accessories for modules switch/socket etc in metal flush box modular with cadmium plated iron screws completeincluding PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point controlled by one, one way flame proof rotary type switch complete all as specified and as directed. 40 Supply and fixing switch flame proof rotary type with terminal box in LM6, 16 amps single pole 230 volts complete all as specified and as directed. 41 M & L for modular metal flush box 12 Module complete all as specified and directed. 42 M & L for modular white cover plate with frame, 12 module complete all as specifed and directed. 43 S & F for LED lamp 7 watt (retrofit) complete all as specifed and directed. 44 S & F LED type conical shape wall metal body with 1 no 7 Watt retrofit LED Lamp minimum lumen 700, complete all as specifed and directed. 45 S & F LED type table lamp / bed side light ( 3000k) Metal body 2 Watt minimum 50 lumen complete all as specifed and directed. 46 S & F telephone Socket (RJ-11) modular type complete all as specifed and directed. 47 S & F TV Socket modular type complete all as specifed and directed. 48 Supplying and fixing ceiling fan five star rated withBrush Less direct current (BLDC) 1200 mm sweep (without remote ) , 28 W complete withblades,down rod and accessories,230v,Min delivery 210 CFM with service value 6.00 BEE complete all as specified and as directed. 49 All as per Ser Item No 13.17 here-in-above but for 1400mm sweep, Minium air delivery 245 CFM with service value 6.00 BEE, five star rating with brushless direct current motor (BLDC) complete all as specified and directed. 50 Supplying and fixing exhaust fan made of sturdy Engineering plastic complete with lovers shutters, AC single phase, 230 V, 50 HZ , 1200 RPM, Copper winding, 250mm Sweep complete all as specified and directed. 51 Supplying and fixing exhaust fan noiseless square type metal body case , 450mm sweep heavy duty single phase (1400 RPM) ISI marked with blades flush mounting withlouvers, AC single phase 230/240 volts, 50 Hz including necessary fixing accessories and make good of surfaces complete all as specified and as directed. 52 Supplying and fixing sheet metal enclouser for Vertical DBS Triple pole and neutral 6 way double door 415 Volts when MCCB 4 Pole to be used as incommer complete all as specified and as directed. 53 Supplying and fixing sheet metal enclouser for Vertical DBS Triple pole and neutral 8 way double door 415 Volts when MCCB 4 Pole to be used as incommer complete all as specified and as directed. 54 Supplying and fixing sheet metal enclouser for Vertical DBS Triple pole and neutral 4 way double door 415 Volts when MCCB 4 Pole to be used as incommer complete all as specified and as directed. 55 Supplying and fixing MCCB 125 Amps, capacity 25kA, 4 pole, 415 volts (Adjustable thermal type & fixed magnetic setting) complete all as specified and as directed. 56 Supplying and fixing sheet metal enclouser for DBS Single pole and neutral 6 way double door with 200 Amps rated bus bar 240 Volt complete all as specified and as directed. 57 Material and labour for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded,unsheathed1100 volts grade in PVC concealed rigid conduit (heavy grade) of not less than 20 mm diawith all fittings and conduit accessories concealed type including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694)as earth wire complete all as specified and as directed. {Note:-(i) Two runs of cable with one run earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.} 58 Material and labour for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded,unsheathed1100 volts grade in PVC concealed rigid conduit (heavy grade) of not less than 20 mm dia with all fittings and conduit accessories concealed type including one runs 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694)as earth wire complete all as specified and as directed. {Note :-(i) two runs of cable with one run earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.} 59 Material and labour for sub main wiring with four runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded,unsheathed1100 volts grade in PVC concealed rigid conduit (heavy grade) of not less tha 25 mm dia with all fittings and conduit accessories concealed type including two runs 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694)as earth wire complete all as specified and as directed. {Note :-(i) Four runs of cable with two runs earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.} 60 Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level,connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation andearth work insoft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregatepit, funnel,20mm dia GI medium grade watering pipe, 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @100mm c/c both ways, one lifting handle made out of 10mm dia TMT bar 250mm long embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick including complete all as specified and directed. {NOTE:- (i) Each protection pipe and earth lead upto and including 7.50m length is deemed to be included in unit rate of of this item..} 61 (ROAD/PATH)M & L 225 mm thick (compacted thickness)wet mix macadam( WMM), with curshed stone aggregate and stone dust (as per design mix)of specifiedgrading, spread using mechanical paver as specified, watered, rolled & consolidated as specified to required gradient and camber complate all as specified & directed. 62 M&L for laying polythene paper black 150 micron with laps complate all as specified & directed. (Area for polythene paper without considering lap shall be measured and paid) 63 M&L and laying 150 mm thick (compacted thickness) wet mix macadam (WMM) with crushed stone aggragate of specified grading,spread using mechanical paver as specified, watered, rolled and consolidated as per required greadeant and camber complate all as specified & directed. 64 M&L for 100 m thick dry lean concrete (DLC) over a prepared subgrade with coarse and fine aggregate conforming to IS : 383, Size of aggregate not exc 40 mm (Grading and other parameters as per table 600 - 1 of MORTH, IRC SPR : 49 Specification) complate all as specified & directed. 65 M&L for cleaning and preparing the road surface and making good for road marking applying reflective thermoplastic white road marking paint (HOT APPLICATION) comforming to BIS 3262 laid down through modern propelled road marking machine in a layer of CRYSTALEX and use of all ingredients such as binder, glass, beads, titanium dioxide, calcium carbonate, interfiller thermoplastic required for glass beads per square meter by incorporating the white glass beads for reflectivity in 100mm width complete all as specified and as directed.Make of Thermoplastic Road marking paint/Retro-Reflective paint - M/s Asian Apcomark, M/s STP or M/s Shalimar Paints Ltd or M/s Berger Paints Ltd, M/s Jhonson & Nicholson Paints Ltd or M/s Jotun India Pvt Ltd. 66 (SEWAGE DISPOSAL)M&Lfor constrution of RCC Septic tankcoventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 150 users Complete all as shown on drawing and as directed. 67 M&L for constrution Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 4.5 M effective depth Complete all as shown on drawing and as directed. 68 (EXTERNAL WATER SUPPLY) Design, supply, install, testing and commissioning Iron removal pressure feed type filtration plant 10000 GPH to with stand pressure 10 Kg/Sq cm with catalytic and filter media (as required size and grade / mesh to obtain potable water recommended parameters as per WHO) including MS frontal pipe (duly welded), Cocks, valves, (inlet outlet, back wash, rinse, bypass complete as per manufacturers instruction). Provision of main hole Hand hole strainer including air vent system, coagulant feeder with accessories, oxidation chamber with media, (MnO2) with all accessories suitable capacity with all fitting fixture, pressure gauges, RCC/PCC foundation as per OEM recommendation. Drainage system and connected to rising and delivery system including painting and writing complete. The technical details of Oxidation chamber and Multigrade filter are as given below:- 69 A) Oxidation Chamber- (i)Feed Flow - 40 M³/Hr. (ii) Operating pressure - 3.5 kg/cm². (iii) Max. allowable pressure drop - 0.5 Kg/cm. (iv) MOC of vessel - MS. (v) Frontal Pipeline Size - 150/100mm. (vi) Media type - Manganese-di-oxide. (vii) Thickness in mm (shell and dish-ends) - 6 mm. (viii)Media Quantity - 600 Kg. (B) Multigrade Filter- (i) Flow rate - 40 M³/Hr. (ii) Operating pressure - 3.5-5.5 kg/cm². (iii) Max. allowable pressure drop - 0.5 Kg/cm². (iv) Continuous duty cycle - 48 Hrs. (v) Backwash - 20 Min. (vi) Rinsing - 10 Min. (C) Filtering Media Details- (i) Media Type - Mixed sand. (ii)Depth of sand - 2800 Kg. (iii) Depth of Gravels support - 2000 Kg. (iv) Guaranteed life of filtering media - One year.(D) Vessels Details- (i) Type Cylindrical - Vertical. (ii)Dimension in mm (DIA X HOS) - 1600 X 2300 mm. (iii) Free board for back wash - 50%. (iv)Materials - MS. (v) Thickness in mm (shell and dish-ends) - 8-10mm. {Note:-- Rate deemed to be included with the followings:-(a)Raw water and treated water tested report of all parameter from National Test House Salt Lake. (b)Training to DEL Staff with required material and maintaining log book and other register as directed. (c) Electronic flow meter-01 including necessary wiring complete. (d)Butter fly and gate valves as required.(e) 2 Nos air compressor of capacity 210 CFM with 3 Phase Motor, Starter, air pipe connection including electrical connection complete. 70 Supply, install, lowering, testing & commissioning of submersible pump set 8 stage, suitable forminimum head 40 Mtr with 635 lpm dischage with electric driven motor of capacity 15 hp, 415 V AC, TP with operational efficeiency performance and durability wide voltage range 350-440 Volts, super finished water lubricated bush bearing, with less speed drop motors with reflon bearing and sand guard complete all as specified and directed by Engr-in-charge. 71 Trail drilling of bore of size 250 mm dia upto 120 mtr depthby direct rotary/ DTHmechanical system for injection wellin any kind of soil strata including hard stone/boulders and submitting the strata detail both graphically recorded as well as strata results including testing of yield , complete all as specified and as directed. 72 Reaming of bore well from 250 mm dia to 525 mm dia hole in three steps from 250 mm to 350 mm, 350 mm to 450 mm and 450 mm to 525 mm dia bore siutable for lowering ERW Mild steel casing pipes and gravel packing for the required length (i.e 50 mtr depth) below the ground level , complete all as specified and as directed. 73 All as per item no 13.41 here-in-before but exceeding 50 mtr and upto 170 mtr depth, complete all as specified and as directed. 74 Supply, assembling, lowering and fixing in position 250 mm nominal (10) bore ERW MS housing pipe, ISI marked,of 8 mm wall thickness, screwed and socketed in random length upto 6 mtr including fitting of centralizer at regular interval into bore hole to a depth upto 40 mtr from ground level, as per IS 3589, painted both inside and outside with black bituminous paint suitable for drinking water purpose including necessary fittings & fixtures by jointing electric Arc welding , complete all as specified and as directed. 75 Supply, assembling, lowering and fixing in position 200 mm nominal (8) bore ERW MS housing pipe, ISI marked,of minimum 8.0 mm wall thickness, screwed and socketed in random length upto 6 mtr including fitting of centralizer at regular interval into bore hole to a depth exceeding 40 mtr and upto 120 mtr from ground level, as per IS 3589, painted both inside and outside with black bituminous paint suitable for drinking water purpose including necessary fittings & fixtures by jointing electric Arc welding, complete all as specified and as directed. 76 Supply, assembling, lowering and fixing in position low carbon galvanized (LCG) steel strainer pipe 200 mm nominalbore of wall thickness 7.00 mm cagetype wire wound screen ‘V’ shaped profile in suitable length having slots of size 1.6 mm width including necessary end coupling,electric Arc welding as required and including special sockets for connecting to MS pipe, complete all as specified and as directed. 77 Supply and fixing mild steel reducer suitable for (250 x 200 mm ) bore casing pipe, 10 mm thick, fitted to casing pipe as per IS 2800 by means ofelectric Arc welding ,complete all as specified and as directed. 78 M&L for carrying out electro logging test upto complete drilling depth of tube well for fixing water strata and submitting of Report including its interpretation by a qualified Hydrologist/ground water expert , complete all as specified and as directed. 79 S&Fmild steel bail plug assembly suitable for 200 mm bore casing pipe internal threaded with strong iron hook, screwed and welded to casing pipe as per IS 2800 , complete all as specified and as directed. 80 Supply, filling and packing washed pea gravels of size 2 mm to 4.6 mm all around casing pipe and slotted pipe, complete all as specified andas directed 81 S&F mild steel housing clamps 1200 mm long 100 mm wide , made out of 20 mm thick MS plate made to shape for 250 mm bore casing pipe with necessary bolts, nuts and washers at ground level, complete all as specified and as directed. 82 Developing of tube well by means of air compressor, for number of hours, until sand free clear potable water is obtained including testing by using diesel engine driven turbine pump to get maximum yield and discharge including supply of yield test result , complete all as specified and as directed. (Note : The rates of DHPP is inclusive in the quoted rate) 83 S & F well cap made out of 5 mm thick MS Plate with provn of suitable holes for passing two runs of flat 3 core PVC insulated sumersible cable motor and one run of SWR, 100 MM dia column pipe and suitable for fixing 250 mm nominal bore ERW heavy duty MS of 8.0 Mm Wall thickness casing pipe complete all as specified andas directed. 84 S&F pressuregauge with isolation cock suitable for a working pressure of 7 Kg/cm² (Liquid based High Intensity), complete all as specified and as directed. 85 Supply and laying flat PVC insulated PVC sheathed copper couductor stranded submersible cable cores 1100 volt grade 10 Sqmm 3 core including jointing material and connection work , complete all as specified and as directed. 86 S&F round strand steel wire rope dia 12 mm and connected clamp nut bolts fixed ,complete all as per directed. 87 Supply , lowering and fixing MS column pipe 100 mm bore, medium grade, confirming to IS, 3 meter long pipe both end flanged, threading, welding and drilling of holes, cutting of ducts of size 10 mm x 20 mm 2 No. in each flange for fixing submersible cable, including rubber gasket of suitable size, nuts, bolts, washer etc including painted internally and externally with two coat of non corrosive non toxic bituminous paint including making all type of connections as required, complete all as specified and as directed. 88 Supply , install, testing and commissioning of cubical housing cabinet type weather proof powder coated LT panel board indoor type, platform mounted factory made, totally enclosed dust and vermin proofof CPRI approved,openablefrom both front and rear side made of2 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:- 89 (i) Aluminium Bus bar 160 Amps -25 KA breaking capacity(ii) Incoming MCCB, 4 pole, 100 Amps, 415 Volt AC, 25 KA rupturing capacityQty 1 No(iii) Outgoing MCCB, 3 pole, 32 Amps, 415 Volt AC, 10KA rupturing capacityQty 4 Nos(03 For submersible pump and 01 standby)(iv) Outgoing MCB 4 Pole 32 Amps, 10 KA, 240 Volts - 01 Nos(v) Star delta motor starter suitable for 15 HP motor pump - 03 Nos(vi) LED indicating lamps - 03 Nos(vii) Digital Volt meter (Size - 96 x 96mm) 0-500 Volts with selector switch - 01 No(viii) Digital Ammeter (Size96x96mm) With selector switch including CT ( 100/5Amp) with all connection- 01 No(xiv) Matering and accessories complete all as directed by Engr-in-Charge. 90 Supply, installation, commissioning and testing of 200mmsluice valveof cast iron body flangedconforming to IS-14816, PN-1.6 Non rising type spindle and hand wheel including all jointing materials such as nuts, bolts, washers, & fibre/ rubber gasket as required complete all as specified and as directed. 91 Supply, installation, commissioning and testing of 150mmsluice valveof cast iron body flanged conforming to IS-14816, PN-1.6 Non rising typespindle and hand wheel including all jointing materials such as nuts, bolts, washers, & fibre/ rubber gasket as required complete all as specified and as directed. 92 Material and labour for Construction of brick masonry valve pit of internal dimension 90 cm x 90 cm x 90 cm depth with fly ash brick in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping including formwork MS frame with 50 x 50 x 6 mm angle iron 5 mmthick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed. 93 Material and labour for Construction of brick masonry valve pit of internal dimension 60 cm x 60 cm x 60 cm depth with fly ash brick in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping including formwork MS frame with 50 x 50 x 6 mm angle iron 5 mmthick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed. 94 Supply, install, testing & commissioning of Centrifugal pump suitable for minimum, Discharge 635 LPM at 30 Mtr head with cast iron casing, bronze impeller, SS Shaft, electric driven motor of 10 HP, 415 V, TP suitable for under ground sump and install complete including PCC foundation as per manufacture instruction complete all as specified and directed. 95 Supply, install, connecting, testing & commissioning of high pressure single head adjustable chemical dozing system of the folowing specification : (a) Adjustable high pressure 100 PSIG Power input 230 V, 50 HZ, Max flow rate 02 US GPD to 40 US GPD with mandatory assecceries like lead tubing connecting ferrules, check valves, 170 ltr FRP solutin preparetion tank with lid, port hole, inlet/outlet/drain connection, level guage ete and fitted with 900 RPM motor PVC agitator combined with 100 ltr dosing tank lid port hole inlet/outlet/drain connection, level guage etc either fitted with 900 RPM moter and PVC agitator complete all as speficified and directed.Make : Any make of E-in-C approved or ISI Marked of any make as approved by Accepting Officer. 96 Supply and laying DI Pipe 200mm dia of class K-7 Spigot and socket type with and including titan joint gasket complete in any length laid in trenches complete all as specified and directored. 97 Supply and laying DI Pipe 150mm dia of class K-7 Spigot and socket type with and including titan joint gasket complete in any length laid in trenches complete all as specified and directored. 98 M&L DI Fittings bends (any type radius and angle) tapers any type, (straigth, bend, increasing, decreasing or double socket etc) Tee pieces single branch Y junctions double branch, cross (all sockets or socket and spigout ) collars, caps and plugs upto 300 mm bore complete all as specified and directored. 99 (EXTERNAL ELECTRIC SUPPLY)suply , installation and commissioning of compact secondary substation (CSS) 315KVA comprising to following parameters:-(a) Housing to made with conforming to the norms of CPRI, CRCA sheet steel housing 3.15mm thick with corrosion resistance and all side openable hinged door and lock and key arrangements.(b)Steel parts are tested as per IS 6988.(c)Engineered for smooth air flow for natural cooling.(d)No acces to high voltage parts.(e) GI strip earthing for lightening protection and lightening spike etc.(f)Separate earthing for lighrening protection and lightening spike etc.(g)Separation steel sheet wall for VCB/ Transformer/ LT Panel.(h) Heavy lifting lugs with all equipment load.(j) Slopped roof.(k) Necessary danger plates outside fo the CSS.(l) Necessary HT and LT cable / earth strips opening.(m)Necessary form work incl foundation as per OEM recommendation. 100 (n) Circuit Breaker (CB) in SF6 insulated stainless steel enclosure. commissioning of with metering module with necessary CTs adn PT, comprising the following :- (Complete unit is to be installed inside CSS, protection accessories, Enclosoure: Metal Clad, IP-54 Protection Relay : Self Powered Alfa neumatic LCD display type internal are tested for 1 sec, fully compartmentalized sheet enclosure with automatic sagety shutters, GI foundation bolts with provision of cable terminating facilities with powder coated smooth glossy finish and as per follows:(i) Rated Voltage - 12 KV(ii)Rated Frequency - 50 Hz.(iii)Rated continuous current rating - 630 Amps(iv)Impulse withstand voltage - 75 KV(v) Bus bar rating- 150% of continuous current.(vi)Operation: Spring closing mechanism- DC motor operated with 24 volt supply, Breaker Closing- manual & Electrical through TNC switch. 101 (vii)Shunt trip coil- 230 V, AC(viii) Safety interlock locking facility - Required(ix)Breaker panel indication - ON (RED)/ OFF (Green)(x) Accessories: Mechanical counter, space heater with thermostat, fuse adn ON/OFF switch, Aux relays for remote trip/ indication for PC interface etc, cubicle illumination lamp LED 9 watt retrofit type 230 V AC, T-N switch, anti pumping contractor etc.(xi) Mimic Diagram : An operating mimic diagram shall be provide on the front side of each cubicle(xii)Battery Bank with charger for SF 6 Circuit Breaker is included in the item rate and rating of battery as described by OEM.(Note : SF 6 Circuit Breaker complete will be obtained directly from the OEM and not from the authorised system assemblers of OEM.The installations, calibration and testing of CB will be conducted in the presence of authorised representative of OEM by the Contractor.) (o)Transformer 315 KVA Copper wounded dry resin cast distribution type 11/0.433 KV, 3 phase, 4 wire LT output 50 Hz DYN 11 suitable for indoor installation of load tape changer with step + 7.5% upto (-) 7.5% in step of 25.% on HT side all technical specification comprising to IS 11171 update version part with all necessary satndard fittings and accessories complete after necessary testing after completion with the following specification : (i) Standard KVA Rating- 315 KVA (ii)Primary Voltage - 11 KV AC(iii) Secondary Voltage - 433 Volts . 102 (iv)Neutral earthing should be solidly earth system (v) Rated Frequency - 50 Hz with + (-) 3% Tolerance (Note : All outgoing MCCBs should be adjustable thermal and magnetic protection and Ics = 100% Icu for all MCCBs). q) Necessary interconnections for HT and LT equipment with suitable size insulated copper bus bar.(r) Necessary foundation for installations of CSS. 103 Suply , installation and commissioning of Compact Secondary Substation (CSS) 250 KVA comprising to following parameters :-(a) Housing to bemade with Conforming to the norms of CPRI, CRCA sheet steel housing 3.15mm thick with corrosion resistance and all side openable hinged door and lock and key arrangements.(b)Steel parts are tested as per IS 6988.(c)Engineered for smooth air flow for natural cooling.(d)No acces to High voltage parts.(e) GI strip earthing for lightening protection and lightening spike etc.(f)Separate earthing for lightening protection and lightening spike etc.(g)Separation steel sheet wall for VCB/ Transformer/ LT Panel.(h)Heavy lifting lugs with all equipment load.(j) Slopped roof.(k) Necessary danger plates outside of the CSS.(l) Necessary HT and LT cable / Earth strips opening.(m)Necessary form work incl foundation as per OEM recommendation. 104 (n) Circuit Breaker (CB) in SF6 insulated stainless steel enclosure. commissioning of with metering module with necessary CTs and PT, comprising the following :- (Complete unit is to be installed inside CSS, protection accessories, Enclosoure: Metal Clad, IP-54 Protection Relay : Self Powered Alfa neumatic LCD display type internal are tested for 1 sec, fully compartmentalized sheet steel enclosure with automatic safety shutters, GI foundation bolts with provision of cable terminating facilities with powder coated smooth glossy finish and as per follows:(i) Rated Voltage - 12 KV(ii)Rated Frequency - 50 Hz.(iii)Rated continuous current rating - 630 Amps(iv)Impulse withstand voltage - 75 KV(v) Bus bar rating- 150% of continuous current.(vi)Operation: Spring closing mechanism- DC motor operated with 24 volt supply, Breaker Closing- manual & Electrical through TNC switch.(vii)Shunt trip coil- 230 V, AC(viii) Safety Interlock Locking facility - Required(ix)Breaker panel indication - ON (RED)/ OFF (Green)(x) Accessories: Mechanical counter, Space heater with Thermostat, Fuse and ON/OFF switch, Aux relays for remote trip/ indication for PC interface etc, cubicle illumination lamp LED 9 watt retrofit type 230 V AC, T-N switch, anti pumping contractor etc.(xi) Mimic Diagram : An operating mimic diagram shall be provide on the front side of each cubicle. 105 (xii)Battery Bank with charger for SF 6 Circuit Breaker is included in the item rate and rating of battery as described by OEM.(Note : SF 6 Circuit Breaker complete will be obtained directly from the OEM and not from the authorised system assemblers of OEM.The installations, calibration and testing of CB will be conducted in the presence of authorised representative of OEM by the Contractor.) (o)Transformer 250 KVA Copper wounded dry resin cast distribution type 11/0.433 KV, 3 phase, 4 wire LT output 50 Hz DYN 11 suitable for indoor installation of load tape changer with step + 7.5% upto (-) 7.5% in step of 2.5% on HT side all technical specification comprising to IS 11171 update version part with all necessary standard fittings and accessories complete after necessary testing after completion with the following specification : (i) Standard KVA Rating- 250 KVA (ii)Primary Voltage - 11 KV AC 106 (iii) Secondary Voltage - 433 Volts (iv)Neutral earthing should be solidly earth system. (v) Rated Frequency - 50 Hz with + (-) 3% Tolerance.(p)LT Panel for 250 KVA Transformer made with 2 mm CRCA sheet with necessary angle iron frame and vermin proof font side openable double door with necessary locing arrangement opening for bus bar / cable entry opening for natural air ventilation / cooling necesary Ammeter, Voltmeter, Selector switch, CTs , suitable size bus bar, paints and primer with Air Circuit Breaker (ACB) as incomer 630A, 50 KA, 415 V , AC, 50 Hz, 4 Pole with neccesary setting and microprocessor control draw out type bus bars, as outgoing MCCB 200 Amps, 35 KA - 02 Nos, MCCB 160 Amps, 35 KA - 02 Nos & 32 A MCB 4 Pole - 04 Nos. (Note : All outgoing MCCBs should be adjustable thermal and magnetic protection and Ics = 100% Icu for all MCCBs).(q) Necessary interconnections for HT and LT equipment with suitable size insulated copper bus bar.(r) Necessary foundation for installations of CSS. 107 Supply and fixing LED street light fittings on ploes capacity 45 Watts, high pressure die cast aluminum housing IP 66 rating front cover made of toughened clear glass, suitable for pole mounting wih bracket arm 40mm dia, Gl light grade pipe upto 1.4 m long, bend to required shape, clamp 40mmx6mm or required length including nuts & bolts fixed on steel poles complete all as specified.Model No : ENDURASUNDOWNSL45WLED765PASYBOTG of make : Havells or equivalent make as per Appendix D. 108 Supply & Fixing junction box with 3 Phase terminals and size of box 130mm x 180mm x 77mm or nearest higher size made of polycarbonate with IP 66/67 degree of protection, dust proof, water tight,shock proof, fire retardant,with internally embedded gasket fitted with heat treated bakelite for terminals block and PVC Glands for cable entry complete all as directed 109 M&L Three core 1.5sqmm(nominal area)service wire PVC insulated copper conductor FRLS, multi stranded, unsheathed 1100 volts grade IS-694 marked andfrom junction box to street light fitting through steel pole withPVC conduit & necessary clamps, bolts & nut etc required for fixing complete all as specified and directed. 110 Supply , install, testing and commissioning of cubical housing cabinet type conforming toCPRI approved LT panel board outdoor type, platform mounted factory made dust proof, weather proof powder coated totally enclosed dust and vermin proof openablefrom both front and rear side made of3.15 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer.The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowings :-System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -200 Amps , cable entry (incomming and outgoing ) form bottom with cable gland Incomming : 125 Amps MCCB FP,35 KA, 415 Volts, 50 Hz-01 No (Incoming from CSS)Outgoing -(a) MCCB 4 pole 100 Amps 25 kA - 02 Nos (for signal unit and 1 standby)(b) MCCB 4 pole 16 Amps 25 kA - 2 Nos (For OFFR Living ,meter or switch house and and 01 No for street lights)(c)Timeswitches astro type 250V sigle phase of 20 Amp rating with contactor(d) Digital volt meter (size -96x96mm) 0-500 volts with selector switch -01 Nos(e) Digital Ammeter (Size 96x96mm) with selector switch incl CT (500/5 Amp) with all connection -01 No (f) LED indicating lamps -03 Nos 111 Supply , install, testing and commissioning of cubical housing cabinet type CPRI approved LT panel board outdoor type, platform mounted factory made dust proof, weather proof powder coated totally enclosed dust and vermin proof openablefrom both front and rear side made of3.15 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer.The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:- System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -400 Amps , cable entry (incomming and outgoing ) form bottom with cable glandIncomming : 250 Amps MCCB FP,35 KA, 415 Volts, 50 Hz-01 No(incoming from CSS)Outgoing -(a) MCCB 4 pole 200 Amps 35 kA - 01 Nos (Adm buidling)(b) MCCB TPN 16 Amprs 25 KA-02 Nos (Guard house and standby)(c) Digital volt meter (size -96x96mm) 0-500 volts with selector switch -01 Nos(d) Digital Ammeter (Size 96x96mm) with selector switch incl CT (500/5 Amp) with all connection -01 No(e) LED indicating lamps -03 Nos. 112 Supply , install, testing and commissioning of cubical housing cabinet type CPRI approvedLT panel board Outdoor type, platform mounted factory made dust proof, weather proof powder coated totally enclosed dust and vermin proof openablefrom both front and rear side made of3.15 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers.The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:-System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -600 Amps , cable entry (incomming and outgoing ) form bottom with cable glandIncomming : 315 Amps MCCB FP,35 KA, 415 Volts, 50 Hz-01 No(incoming from CSS)Outgoing -(a) MCCB 4 pole 125 Amps 35 kA - 03 Nos(02 Nos for OR Accomodation and 01 Nos standby)(b) MCCB 4 pole 63 Amps 25 kA - 01 Nos(JCO Accomodation and JCO Club) (c) MCCB 4 Pole 25 Amprs 25 KA - 01 Nos (Drying and ironing room)(d) MCCB TPN 16 Amprs 25 KA - 02 Nos (Street lights and one standby)(e) Digital Ammeter (Size 96x96mm) with selector switch incl CT (500/5 Amp) with all connection -01 No (f) Digital volt meter (size -96x96mm) 0-500 volts with selector switch -01 Nos (g) LED indicating lamps -03 Nos (h)Timeswitches astro type 250V sigle phase of 20 Amp rating with contactor 113 Supply, install, testing and commissioning of Automatic Power Factor Correction (APFC) panel board of aggregate capacity 15 KVAR suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz, outdoor type, cubicle, floor mounted, free standing dust and vermin proof, air ventilation made out of 3 mm thick CRCA sheet duly powder coated, Manufactured shall be CPRI norms and as approved by GE, factory made.Panel board shall have front and rear opening with hinged type doors and rubber gasket, handles, industrial type locking arrangement, cable alleys, switch gear compartment, bottom cable, entry holes for incoming and outgoing cables, earthing terminals, danger notice plate, Aluminum bus bar duly covered with heat shrink sleeves of colour coded duly fixed on DMC / SMC insulators housed in a separate bus bar chamber including control wiring with PVC insulated, flexible, multistranded copper conductor cables of adequate size and of adequate length for connecting of capacitors, contactors etc duly ferruled crimped with suitable lugs / thimbles and including connecting of incoming and outgoing cables. Panel board shall be mounted on and including MS angle iron frame of suitable size duly painted and PCC1:2:4 type B1 for foundation / Platform to suit the site requirement complete all as specifiedand directed and comprising of following:-(i) APFC relay microprocessor based digital display type of 9 stages suitable for operation of PF upto unity – 01 No. 114 (ii) MCCB 320 Amps, 4 pole, 50KA, 415V, 50HZ – 01 No for incoming.(iii) MCCB 80 Amps, 4 pole, 25KA, 415V – 03 No’s for capacitor outgoing.(iv)MCCB 40 Amps, 4 pole, 25KA, 415V – 01 No for capacitor outgoing.(v)MCCB 16 Amps, 4 pole, 25KA, 415V – 05 Nos for capacitor outgoing(vi) MCB SP 0.5 to 5 AMPS, ‘C’ Curve, 240V-09 Nos as per circuit control.(vii) Capacitor Bank 2 KVAR, 3 phase, 440V MPP type including suitable rating contractor -05 Nos.(viii) Capacitor Bank 2 KVAR, 3 phase, 440V MPP type including suitable rating contractor -02 Nos.(ix) Capacitor Bank 1 KVAR, 3 phase, 440V MPP type including suitable rating contractor -01 Nos. 115 (x) LED indication lamps RYB – 01set.(xi) Auto / manual selector switch -01No.(xii) Push button and indication lamp for each capacitor bank -01 set.(xii) Digital voltameter with selector switch -01set.(xiv) Digital ammeter with selector switch & CT’s -01.(xv) Aluminium bus bar TPN 480 Amps rating -01 set.Note: The contractor should be factory inspection and drawings approval by the GE / Engineer-in-Charge before procurement after commissioning of APFC panel the power factor (PF) to achieve 0.95 to 0.99 mandatory at any load condition automatically. 116 Supply and fix solar street light smart integrated solar system all in one with MPPT (Maximum Power Point Tracking) charge controller ,Tilable LED Panel,Adjustable AIO mounting angle ,mono crystalline solar panel ,PIR motion sensor, and 6m tubular pole with 30 wattLED light at a rate 100 lm/w, 60wp, 75 AH (Lithium ferrous phosphate battery luminaries must have a life of greater than 50,000 hours and have IP 66 rating, the modules are to bedesigned to with stand corrosive atmosphere and heavy wind loads. the modules are to be certified for standers IEC 61215, IEC 61730 (Safely class I & II) complete all as specified and directed. 117 Supply and fix LED post top lantern decorative typeo fttings for 360 degreee indirect light on pillars of capacity 40 watts high pressure die cast aluminium housing IP 65 rating, suitable fr mounting 40 dia GIlight grade pipe upto 0.5 m long or required length including nuts and bolts and fixed complete all as specified and directed.Model No : RUBYPT40WLED757PSYMTOPC OF MAKE : Havels or equivalentmake as per Appendix D 118 M&L fpr boring holes horizontally under road without damaging the surface of road (minimum 1 mtr below the road surface/ footpath with the help of GI tubing not exceeding 100mm dia bore for passing of UG cable complete all as specified and directed. 119 (REFGIGERATION & WATER COOLER) Supply, installation, commissioningofrefrigerator single door, electric driven (single phase) 230V AC, 50 Hz, 308 - 315 ltrs capacity, conforming to IS 15750 (2006) for frost free, with power saver compressor with minimum BEE 5 star rating complete all as specified and as directed. 120 Supply, installation, commissioningofrefrigerator single door, electric driven (single phase) 230V AC, 50 Hz, 192 - 210 ltrs capacity, conforming to IS 1476 for direct cool with power saver compressor with minimum BEE 5 star rating complete all as specified and as directed. 121 Supply, installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hzminimum capacity 320 ltrs, BEE 5 star rating complete all as specified and directed. 122 Supply, installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hzminimum capacity 400 ltrs, BEE 5 star rating complete all as specified and directed. 123 Supply, installation, commissioning of Water cooler fullystainless steel, electric driven single phase having approx storage capacity of 80 Ltr and nominal cooling capacityof 40 Lts per Hour as per latest IS 1475 and BEE 5 star ratingcomplete all as specified and directed. 124 Supply, installation, commissioning of Water cooler fullystainless steel, electric driven single phase having approx storage capacity of 120 ltr and nominal cooling capacityof 60 Lts per Hour as per latest IS 1475 and BEE 5 star ratingcomplete all as specified and directed. 125 S & F Voltage stablizer of capacity 2 KVA for automatic operation, single phasewith neutral, air cooled indoor type and disign defore input Voltage variation between 170 Volts to 250 Volts with output Voltage stabiilized at 230 Volt with accuracy of + 2.5% complete all specified and director. 126 S & F Voltage stablizer of capacity 1 KVA for automatic operation, single phasewith neutral, air cooled indoor type and disign defore input Voltage variation between 170 Volts to 250 Volts with output Voltage stabiilized at 230 Volt with accuracy of + 2.5% complete all specified and director. 127 (DG SET) M&L Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected tousing galvanised iron strip 32×6mm as earthing lead earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated by Engr-in-charge including testing on completion. 128 Supply and installation testing and commissioning silent Diesel Enginegenerating set 415 volts 40 KVA3 phase 0.8 power factor, 50 Hz, 1500RPM self exicited self regulated brushlessAC generator installed including AMF panel,suitable for ambient condition at Panagarh and confirming to condition under ISO 3046, IS:10001/ 10002,BS 5514/5000 with capacity of 10% overloading for one hour in every twelve hour duration and including the following accessories :- (A) Alternator:- Synchrounous alternator rated at 40 KVA suitable for continuous operation at 1500 RPM generating 415 volts at 0.8 p.f (lag) suitable for 50 Hz, three phase, 4 wire system.The alternator shall be brushless, single bearing, self excited/ self regulated with an AVR. The alternator will be suitable for climate and shall generally confirm to IS: 4722 :2001. The salient features of the alternators are :- (a) +-1% voltage regulation (max) in static conditions.(b) IP:23 protections with class H insulation.(c) Permanent lubricating bearing. 129 (B) Diesel Engine:- Adquate capacity of diesel engine water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500RPM, as per relevant IS/BS complete with standard accessories. (C)ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent (to comply GRIHA and other agencies norms) canopy shall be of nut bolt type construction. Critical processes of punching is done on CNC machines to maintain dimentional accuracy of holes within 0.1 mm.Powder coating is done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam as acoustic material & Rock wool for hot zone.Adequate hinged doors shall be provided to canopy, one door shall have glass window for control panel visibility (D) AMF panel : Automatic Mains Failure (AMF) panel made of CRCA sheet of 2 MM thick including necessary arrangement to install, testing and commissioning & connecting ot load cable to up ot changeover switch, suitable capacity of 4 pole MCCB complete all as per OEM recommendation.(E) Civil Works :- All civil works including PCC platform and related foundations incl for panel and equipments incl making goodof disturbed area during installation and commissioning of genset. The depth and size of the foundation and PCC as recommendedby the manufacturer. 130 (F) AMF Panel Specification shall be as per manufacture instruction.Note :-The contractor shall be arrange for artificial load resistive for testingof DG set at site and the cost is deemed to be included in the quoted ratesMAKES :- Make of engine : CUMMINS/KIRLOSKARGREEN/ASHOK LEYLAND/ GREAVES COTTON.Make of alternator : KIRLOSKAR GREEN / ALSTOM / CROPTON GREAVES /SIEMENS 131 Supply, erecting,testing aand commissioning of solar water heating system with heat exchanger for cold & warm regions respectively with solar evacuated tube collection conforming to IS : 12933 (Part - i ) with amdt No 1 and IS : 12933 (Part 2) /2003 suitable for inlet water with chlorine and fluorine content up ot 100 ppm and supply hot water at the outlet of 200 litters capacity with elctrical back up meeting specifications as under and comprising of followings :-Supply and fixing rotational moulded polyethylene water storage tank (Cylindrical Vertical with closed lockable top with lid and locking arrangement) hoisted and fixed in position all as specified in SSR Part -I of capacity 200 Litters complete for storage of cold water feeding to solar water heater, including staging made out of MS Angle iron 50x50x6 mm all as specified and directed at site by Engineer-in-Charge.Material :- Soalr water heating System : Comprising of solar Evacuated tube Collector, Collectors stand assembly.Staniless steel insulated hot water Storage tank with heat exchange and various other components . Solar evacuated tube collector component shall have :Evacuated tube collector component shall have : solar Evacuated tube collector cover plate made of toughened glass.Sheet for absorber made of copperAbsorber made of copper sheet and copper tube.the minimum thickness of Aluminium shall be as under:- (a) Channel section for sides 1.6mm (b) Sheet for bottom 0.7 mm (c) Support for glass retaining 1.2 mm sheet for entire body 1.0 m AbsorberAbsorber shall consist of riser, header and sheet for absorer. The diameter of header shall be 25.4 +/- 0.5 mm and thickness 0.71 mm. The Diameter of riser shall be 12.7 +/- 0.5 mm and thickness 0.56 and made of copper only. 132 S & F Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore complete all as specified and directed. 133 Rain water Harvesting /Recharge PitS & F 150 MM perforated UPVC pipe with 20% Perforation complete all as specified and directed. 134 S & F 150mm bore PVC (SWR) vent cowl complete all as specified and directed. 135 M&L for hand packed gravel (Stone chips 12.50mm) for filling in bore holes and inside of recharge pit complete all as specified and directed. 136 Boring for 350 Mm Dia bore to a depth of 40 mtr in soil and getting out and disposal of spoil to a distance of 50 mtr using DMC method ( Direct mud Circulation) complete all as specified and directed. 137 GRIHA RATING FOR FOLLOWING BUILDING:-Minimum 3 star GRIHA rating shall be obtained for the following buildings which includes pre-certification and final ratings from approved aggency(a) OFFICER/ ADMIN BLOCK (b)SINGLE living JCOs ACCN(c) SINGLE living HAV/OR ACCN (T/S)Note :- 01The GBA (Green Building adviser) ofr obtaining GRIHA certification shall be approved by Accepting Officer.02. The GBA shall be responsible for all necessary actions for obtaining final GRIHA rating as per following guide lines:- (a) Pre-Cretification :-1. Submission of GRIHA per certification documents to certification agency as applicable immediately after the issue of Job/Work order.2. Analysis and suggest improvement/correction in the MEP/Other relevant drawings/documents and draft tender of the subject work for GRIHA star Rating (Min Three Star).3. Preparation, Submission & uploading all the documents in accordance with the GRIHA requirment, documentation shall be supported by drawings, test result quipment catalogues & calculations.4. Selection of equipment & material.5. To facilitate the planning team for selection of appropriate energy efficient & eco -friendly technologies, equipment & materials for the building e.g lighting system ,white goods, water treatment technologies, renewable energy, nontoxic paints, rapidlly renewable materials, recycled materials, ecofriendly materials etc.6. preparation of vendors & suppliers list for inclusion in the tender & working out specification of equiptment & materialto suit the GRIHA requirement. 138 7. Develop templates for GRIHA calculations to achieve certain points, this include materials related criteria, construction of waste management at site, energy calculation etc.8. conduct solar path analysis for each to achieve the best design ( shading device, Orientation etc.)9. Conduct solar path analysis for each fenestration to achieve the best design ( shading device, orientation etc)10 Perform day light analysis to ensure optimun condition achieved as per the guidelines provided by ECBC 2007.11. Perform day light analysis for window -wall ration, glass peropertiies (SHGC) & Providing recommendations to meet the compliance of ECBC 2007.12. Perform hourly calculation to show that thermal comfort condition as well as non-condition area are cachieved.13. Perform energy simulation to predict the energy performance of energy system in the bldg is less than the benchmarked energy perfomance as prescribed by GRIHA.14. Submit of ECBC compliance document to show that compliance fo mandatory requirment of ECBC are meet.15.Submission of draft specification to comply with relevant criteria of GRIHA for inclusion in tender documents.16. Liasoning and coordinating with GRIHA team for registration of project, uploading relevant document. Responding ot queries, observations, modification and corrections given by GRIHA team within specified time framed and reporting client with lates update.17. completion of all documentation requirement and formatlities before conclusion of main bldg. Contract and obtaining pre-certification with 3 or above star rating. 139 Final Rating:-Acquiring of Final Post GRIHA (minimum 3 star rating) certification approval from GRIHA including changes in drawings/ design during execution of work.Note:-The consultancy fees is inclusive of the following:-1. Pre-certification Registration Fees2. Certification registration Fees3. Site visit of GRIHA Official4. Site visit of GRIHA Official5. Third party EvaluatorPayment Schedule :-(i) 10% after pre-certification(ii) 50% at finalisation of specification(iii) 40% after obtaining GRIHA certification 140 Providing and fixing white vitreous china floor mounted water closet of size 360X640X685 mm of approved shape including providing and fixing vitreous china cistern with duel flush fitting, of flushing capacity 3 litre/6litre (adjustable to 4litre/8litre, including seat cover, and cistern fitting nuts, boltsand gasket etc complete all as specified and directed.Model No: SLS-WHT--6851P of make Jaquar of equivlent make/model as specified in Appendix D. 141 Providing and fixing white vitreous china wash basin for under counter mounting, specially fabricated brackets, painted whit, brass tap, 32 mm C.P. Wast, 15mm C.P. Brass self closing tap, connection pipe & rubber adopter for waste connection, complete including cutting and making food the walls, wherever requird complete all as specified and directed.Cat No : CNS_WHT_705 for wash basin ofmake Jaquar& Cat No PRS-031 for 15mm C.P brass tapof make Jaquar or equivlent make/model as specified in Appendix D. 142 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. Size 485 X 310 X 710 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitablebrackets all as per manufacturers specification and direction of Engineer-in-Charge.Cat No : URS-WHT-13255 of make of equivlent make/model as per Appendix D 143 Providing and Fixing of P.V.C waste Flexible pipe 40mm dia for sink and Urinal including PVC waste fittings complete including cutting and making good the walls, wherever required complete all as specified and directed 144 Providing and Fixing of P.V.C waste Flexible pipe 15mm dia for sink and Urinal including PVC waste fittings complete including cutting and making good the walls, wherever required complete all as specified and directed 145 Providing and fixing C.P. Brass angle valve 15mm dia for basin mixer and gyser pointsconforming to IS : 8931 complete all as specified and directedCat No FLR-CHR-5053N of make of equivlent make / model as per Appendix D. 146 Providing & fixing Liquid soap container of standard shape with bracket of the same material with snap fitting of approvedquality and colourcomplete all as specified and directedCat No : CAN-1135N of make of equivlent make / model as per Appendix D 147 Provinding & fixing Sink cock 15mm nominal bore of approved quality and colour complete all as specified and directedCat No : FLR-5347ND of make of equivlent make / model as per Appendix D 148 Provinding & fixingCP Brass Health faucet with 1.5M S.S Flexible Tube with wall hook including screw, Nut, bolts, cutting wall/floor and making good the same whatever required complete all as specified and directedCat No : ALD-CHR-583 of make of equivlent make / model as per Appendix D 149 Provinding & fixingCP Brass Bid cock Including wall fange, Connections, screws, nut, bolts, cutting wall/floor and makiing good the same whatever requiredcomplete all as specified and directedCat No : FLR 5037Nof make of equivlent make / model as per Appendix D 150 Provinding & fixing sink CP Wall mount double Robe Hookfixed to wooden cleats with C.P Brass screws, cutting wall/floor and making good the same whateverrequired complete all as specified and directedCat No : CAN-1161N of make of equivlent make / model as per Appendix D 151 Providing and fixing of straight type Macfit Single body push fit type WC pan connector with factory supplied srpring loaded seal guard of mcalpine, UK with integral single mould sealing fins made of flexible eva body, including bush/ adaptor for use with C.I pipe as supplied with the pan connecrtor complete all as specified and directed. Model : MAC 1 of make Macalpine of equivlent Model as approved by E-In-C or Accepting officer. 152 HOT WATER SUPPLYSupply, installation, commissioning and testing of water heater storage type, electric driven, capacity of 15 litres, single phase, 230V AC 50 Hz, closed type ISI marked vertical wall mounting, with steel body cover and Copper inner container, BEE 5 star rated. Complete with all accessorios such as safety valve thermostat connection pipe complete all as specified and directed. 153 Supply, installation, commissioning and testing of water heater storage type, electric driven, capacity of 25 litres, single phase, 230V AC 50 Hz, closed type ISI marked vertical wall mounting, with steel body cover and Copper inner container, BEE 5 star rated. Complete with all accessorios such as safety valve thermostat connection pipe complete all as specified and directed. 154 S&F CP Brass stop cock (concealed) of 100mm dia of standand design conforming to 15:8931 complete all as specified and directed. 155 Providing and fixing sound insulated PP piping system as per ON EN 1451 _ Part I-6 & EN 12056 part I-5 with 3 Layer pipe made of PP-C +PP-MV+PP-C in Blue Ral 5014 (Halogen and calcium free) colour, Push-fit type, food safe having high impact and stiffness, offering sound level of not more than 22dBA at a flow rate of 4 I/S and having pipe ring stiffness as per ISO/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560 with all necessary fillings in blue colour, filled with factory fitted lip ring of make : Polyplast or equivalent make as approved by GE suitable for PP110mm dia Pipes complete all as specified and directed. 156 All as per item No 14.24 here-in-after but for PP 75mm dia pipes 157 All as per item No 14.24 here-in-after but for PP 40/50mm outer dia meter pipe (For wash basin etc) 158 Providing and fixing floor trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connection, 110mm inlet& 110m outlet long hight complete all as specified and directed. 159 Providing and fixing 110 X 50mm UPVC Floor Drain / Plain Floor trap complete all as specified and directed. 160 Providing and fixing SS Grating Over Floor Trap& Floor Drain 127 X 127mm complete all as specified and directed. 161 M&L concrete bed to drain pipe including packing under and lacking against the side of pipe after they are laid and tested with PCC (1:4:8) type D-2, for 110mm dia complete all as specified and directed. 162 All as per srl item No 14.30 here-in-after but for PP 40/50mm outer dia meter pipes. 163 S&F clean out cap plug (FCO/COP) for cleaning of same materials (POLO KAL NG) for PP 110mm dia complete all as specified and directed. 164 S&F 3-layer PPR-polypropylene random copolymer conceled pipes SDR 7.6 (PN-16) UV stabilized and antimicro bial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random fitting for 50mm outer dia laid in trinches complete all as specified and directed.
Contract Date: Mar 17, 2026 Contract Value : ₹ 59.85 Crore
Statutory Bodies & Commissions/Committees No of Bidders 5
West Bengal View Result →
14.
Defence #9629534 AOC
Tender For Repair/ Maintenance Of Internal Electrification And External Water Supply At Parundu, External Electric Supply At 4N Det And External Water Supply At 7N Detunder Ge Tirunelveli.; 1 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking creditand making good disturbed surfaces of walls, floors etc. 2 Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia/ PVC Casing cappingalong with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof with and including 1.6 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc as required with 3mm thick laminated hylum sheet top cover all as specified and directed for :- 3 One light point controlled by one switch 4 One fan point controlled by one regulator / switch 5 One 3 pin socket outlet 5 amps socket onindependent board 6 One 3 pin socket outlet 5 amps socket on Same Board 7 One light point controlled by two Nosof two way switches 8 One bell/buzzer point controlled by one push button 9 All description as per item No. 2 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 2.5 sqmm cable as earthing conductor complete all as specified and as directed. 10 Supply and fix in replacement switch flush type single pole two way 5 A 240 Volts complete all as specified and as directed. 11 Supply and fixing in replacement Socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed. 12 Supply and fix in replacement switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed. 13 Supply and fix in replacement switch Socketcombination 2 in 1,5 Amps Flush type 240 Voltscomplete all as specified and as directed. 14 Supply and fix in replacement switch Socketcombination 5 Amps / 16 amps, 5 in 1 flush type 240 Voltscomplete all as specified and as directed. 15 Supply and fix in replacementceiling rose3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed. 16 Supply and fix in replacement Call bell, ding-dong, suitable for working on 230 volts AC supply, single pole, complete all as specified and as directed. 17 Supply and fix in replacementStepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc completeall as specified and as directed. 18 Supply and fix in replacement Bell push flush type5 A 240 Volts complete all as specified and as directed. 19 Supply and fix inreplacement Modular switch 1 way 5A, 1 Module complete all as specified and as directed. 20 Supply and fix inreplacement Modular switch 1 way 16A, 1 Module complete all as specified and as directed. 21 Supply and fix inreplacement Modular bell push ,5 A, 1 Module complete all as specified and as directed. 22 Supply and fix inreplacement Modular Socket 5A-2/3 pin combined 2 Module complete all as specified and as directed. 23 Supply and fix inreplacement Modular Socket5A / 15A - 2 / 3 pin combined 2 Module complete all as specified anddirected 24 Supply and fix in replacement Modular fan regulator step type , 2 Module complete all as specified and as directed. 25 Supply and fix inreplacement Modular switch 2 way 5A, 1 Module, flush type complete all as specified and as directed. 26 Taking down carefully old unserviceable sub main wiring with aluminum /copper conductor cable 4/6 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc. 27 Material and labour for sub main wiring with two run single core4 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor FRLS-H cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia/PVC casing capping 20 mm including conduit accessories all as specified and directed.Note: Three runs of 4 Sqmm cable and one run of 20mmconduit / casing capping will be measured as one unit length. 28 Material and labour for sub main wiring with two run single core 6 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and one run of 6 sq mm multi stranded copper conductor FRLS-H cableas earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed.Note: Three runs of 6 Sqmm cable and one run of 25 mm conduit / casing capping will be measured as one unit length. 29 Material and labour for sub main wiring with four runs single core 6 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and one run of 6 sq mm multi stranded copper conductor FRLS-H cableas earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed.Note: Five runs of 6 Sqmm cable and one run of 25 mm conduit / casing capping will be measured as one unit length. 30 Supply and fix in replacement Sheet metal enclosures with socket plug top and MCB SPN 20A, 240 volts, with a two pin and earth plug socket complete with one single MCB 20 Amps, 240 volts (for AC )complete all as specified and directed. 31 Supply and fix in replacement sheet metal enclosure powder coated double doorfor Distribution Board, SPN 4 way DB,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections,complete all as specified and as directed. 32 Supply and fix in replacement sheet metal enclosure powder coated double doorfor Distribution Board, SPN 8 way DBwith 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, complete all as specified and as directed. 33 Supply and fix in replacement sheet metal enclosure powder coated double door forDistribution Board,SPN 12 wayDB ,415 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, complete all as specified and as directed. 34 Supply and fix in replacement sheet metal enclosure powder coated double door forDistribution Board,TPN 4 wayDB ,415 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, complete all as specified and as directed. 35 Supply and fix in replacement sheet metal enclosure powder coated double door forDistribution Board,VTPN 4 wayDB with IP 43-IK 09 ,disconnecting electric connections, complete all as specified and as directed. 36 Supply and fix in replacementMCB SP 5 A to 32 A, B curve, 10 kA including , Disconnecting electric connections,completeall as specified and as directed. 37 Supply and fix in replacementMCB SPN 32 Amps, C curve 10 kAincluding , Disconnecting electric connections,completeall as specified and as directed. 38 Supply and fix in replacementMCB TP25A - 63 A, C curve 10 kA including , Disconnecting electric connections,completeall as specified and as directed. 39 Supply and fix in replacementMCB TPN 16 A- 32 Amps, C curve 10 kAincluding , Disconnecting electric connections,completeall as specified and as directed. 40 Supply and fix in replacementMCB TPN40A- 100 A, C curve 10 kA including , Disconnecting electric connections,completeall as specified and as directed. 41 Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth stripof size 32 X 6mm including taking down old unserviceable earth strip complete for taking into credit complete all as specified and as directed by the Engineer-in-Charge 42 Supply and fix in replacement Lightning Protection Single point air termination aluminum rod 12mm dia 300mm long with base plate complete all as specified and as directed by the Engineer-in-Charge . 43 Supply and fix in replacement Test point terminal box made out of Gun metal or Phosphorous bronze of size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screwscomplete all as specified and as directed by the Engineer-in-Charge . 44 Supply and fix in replacement Aluminium strip of 25x 3.15mm fixed with screws/ clamps / insulators for roof conductors and down conductors above ground level complete all as specified and as directed by the Engineer-in-Charge. 45 Supply and fix in replacement MCCB3 pole 415 volts25 to100 Amps, with rupturing capacity 16 KA complete all as specified and as directed 46 Supply and fix in replacement MCCB3 pole 415 volts125 Amps, with rupturing capacity 16 KA complete all as specified and as directed 47 Taking down geyser of any make/ type and any capacity after disconnecting the water and electric line connections from any height, bringing down to floor, dismantling the Geyser and overhauling by means of repair/replacement of the defective spares, cleaning externally and internally re-assembling the geyser, fixing in same position and testingfor satisfactory working etc complete.Note:Replacement of defective spares shall be measured and paid under relevant item separately. 48 Supply only Neon lamp indicator (Green and Red) 49 Supply only Bottom flange with inlet and outlet pipe (Apparatus plate) 50 Supply only Thermostat conforming to IS 3017 51 Supply only Flexible connection pipe set of two for cold and hot water 52 Supply only Heating element 2.0 KW 53 Supply Siphon assembly 54 Supply and fix Modular switch SP 1 way 16 Amp with indicator complete all as specified and as directed 55 Taking down ceiling fan 1200mm/1400mm sweep from any height and bringing down to floor, dismantling the ceiling fan and overhauling by means of replacing defective ball bearing, bushes, split pins, grease, packing, winding and cleaning externally, re-assembling the ceiling fan and checking, refixing in its position complete all as specified and directed.Note: (i) Rewinding, replacement of bearing and capacitors shall be measured and paid separately.(ii) All other petty repairs used for this work shall be included in the quoted rate. 56 All as per item No.55 but for exhaust fan 300mm including replacing of rusted nut and bolts complete all as specified and directed. 57 All as per item No.55 but for exhaust fan 450 mm including replacing of rusted nut and bolts complete all as specified and directed. 58 Supply and fix ball bearing suitable for any sweep ceiling fan complete all as specified and directed. 59 Material and labour for rewinding with super enameled copper wire including varnishing, drying and connection complete all as specified and directed. 60 Material and labour for painting of ceiling fans at site with synthetic enamel paint by spray painting including filing cavities with filler in one coat after cleaning dust complete all as specified and directed. 61 Supply and fixing exhaust fan heavy duty 250mm sweep plastic body 900RP, 230V, 50 Hz with louvers, cutting the wall and fixing all as specified and directed.(Note Old exhaust fan to be deposited after taking down to MES store) 62 Supply and fix in replacement louvers for exhaust fan of any sizeincluding taking down old unserviceable louvers and removing the material for taking credit complete all as specified and directed. 63 Supply and fix in replacement Condensor 2.5 to 4 mfd for Ceiling/exhaust fan, including taking down old unserviceable material for taking credit complete all as specified and directed. 64 Supply and fixin replacementFlame proof switch socket &plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earthcomplete all as specified and directed. 65 Supply and fixin replacement Switch flame proof rotary type with termination box in LM6, 16A, single pole 250Vcomplete all as specified and directed. 66 Supply and fix in replacement LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and directed 67 Supply and fixing LED light fitting in replacement 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed 68 Supply and fix in replacementLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed 69 Supply and fix in replacement LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed 70 Supply and fix in replacement round shape 6 watt (6 inch) 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed 71 Supply and fix in replacement round shape 12 watt (8 inch) 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed 72 Supply and fix in replacement square shape 300x30mm size 15 watt220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed 73 Supply and fix LED1x4 feet, 40Watt, recess mounted light fitting environment friendly, new generation, aesthetically designed ultra modern with high transmitive diffuser suitable for indoor spaces complete all as specified and directed 74 Supply and fix LED in replacement vertical mounting integral highbay/medium bay in hangar ceiling at 10 metre height LED IP65lumnnaire,luminous flux 15000 luminous efficacy 150 lmW, IK 08 surge protection luminaries surge protection level until 4kV along with necessary chain, hooks to hold the bolt and hang the light fitting complete all as specified and directed 75 Supply and fix in repairs LED Security light fitting 35 W LEDcomplete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable of suitable size from ceiling rose to fitting etc, including necessary bracket complete all as specified and as directed. 76 Supply and fix in replacement LED light fitting 2x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size including all accessoriescomplete all as specified and as directed. 77 Providing comprehensive annual maintenance periodical/preventive maintenanceincluding annual maintenance of cooling appliances ( Split type Air Conditioners, Water coolers, Refrigerators and Deep Freezers) as per manufacturer specificationby providing one AC/Refrigeration mechanic including replacement ofcomponents as listed in subsequent items here in after. The maintenance of cooling appliances includes the following:-(a) Cleaning of coil unit with dust blower, lubricate the indoor and outdoor fan motor with oil.(b) Cleaning of air filters, indoor unit grillSupply and fixingilters through air blower.(c) Checking and cleaning the drain connection and air filter periodically, washing of coil with ventiklean solution once in a contract period.(d) Check and replace the refrigerant pipe once in a contract period or as and when required.(e) Check and repair the minor electrical fault in incoming supply.(f) Check and replace the water PVC pipe.(g)Replacementof faulty spares/components(h) Carry out the monthly, quarterly and annual maintenance of all cooling appliances of any make & capacity with job card and making the Cooling Appliances functional(Each Job contains 3 Complaints) 78 Supply only the following new items for 1.5 / 2.00 Ton CapacitySplit type AC including testing and commissioning etc complete all as directed. 79 Capacitor 36/45/50 MFD. 80 Air filters. 81 Outdoor fan motor 82 Indoor fan motor 83 Indoor blower 84 Copper condenser coil unit (for A/C) 85 Indoor motor capacitor 2.5 MFD. 86 Outdoor fan motor capacitor 3 to 6 MFD 87 Non return valve (For gas top up charging) 88 Remote control suitable forinverter model Split AC. 89 Electronic components for repairs to PCB 90 PCB board suitable for indoor unit of Inverter model split AC 1.5/2.0 TR . 91 PCB board suitable for outdoor unit of Inverter model split AC 1.5/2.0 TR . 92 Copper pipe of size 1/2 for suction line with foam insulation 93 Copper pipe of size 1/4 for discharge line with foam insulation 94 Swing Motor for indoor unit 95 Supply and fixPVC insulated unsheathed cables of size 2.5 sqmm 3 core multi-stranded Copper conductor wire suitable for AC complete all as specified and as directed. 96 Supply and fixMetal plug top for AC 97 Supply and fixing compressor including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas (M-22/F-22) providing NRV for further topping up of gas and re-fixing in the position including complete testing and commissioning all as directed for the following appliances :- 98 Split type AC 1.5 Ton capacity. 99 Material and labour for SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SPMCB, complete all as specified and directed by Engr-in charge. 100 Supply and fix in repairs LED Security light fitting 25 W LEDcomplete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable of suitable size from ceiling rose to fitting etc, including necessary bracket complete all as specified and as directed. 101 Supply and fix in replacement flat panel 36 watt 2x2 feet 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed 102 Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for laying pipes and getting out in any type ofsoil, complete all as specified 103 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified 104 Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. 105 Spreading of riddled earth obtained from trenchesfor cable cushioning on top and bottom of cable as specified for cable protection complete all as specified and directed. (Note: Only punned thickness of riddled earth shall be measured) 106 Supply and laybricks in trenches , common burnt clay building bricks, subclass `B’ designation 75, old size ,with width equal to thelength of the brick; complete all as specified and directed. 107 Supply and fix in replacement MCCB4 pole 415 volts63 Amps, with rupturing capacity 16 KA complete all as specified and as directed 108 Supply and fix in replacement MCCB4 pole 415 volts100 Amps, with rupturing capacity 16 KA complete all as specified and as directed 109 Material and labour in replacement of GI pipe light grade of size 80mm diafor protection of UG cable on walls/under floors/road crossings/in trenches complete all as specified and as directed by the Engineer-in-Charge . 110 Servicing of high mast light control gear suspension system with stainless steel wire rope guage and double drum winch with luminaries mounting arm pulley assembly complete all as specified and directed by Engr-in-charge. 111 Supply and fixing in replacement LED flood light 150Watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP6 protectionwith impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-charge. 112 Supply and lay LT under ground cable 1100 volts grade Cross linked Polyethylene (XLPE) insulated PVC Sheathed Cables 3.5 core 70 sqmm, armoured multistranded heavy duty electric cable with aluminium conductor laid in trenches/ duct / walls including cable gland and lugs on both end termination including laying, connecting to various switches inpanel board, testing and commissioning complete all as directed & as specified. 113 Supply and fixing L bus bar box outdoor type made up of MS sheet 3mm thk of size 600x500x300mm CPRI approved with supporting angle of size 50x5xmm, 800mm long with nut, bolts and washers of suitable size for fixing on ground with PCC 1:3:6 mix, 20mm aggregate for foundation providing Aluminum bus bar 400m long and 40x5mm thick, 04 nos with supporting insulators and colour coded PVC sleeves including necessary bottom plat whole for entry o cables complete all as specified and directed. 114 Supply and fix in replacementGI tubingmedium gradeincluding provision of necessary fittings like Tee,Bend,Socket,Elbow, Short pieces connectors, plugs, unions, etc and accessories laid in trenchesall as specified and directed by Engineer-in-Charge of following bore sizes:- 115 (a) 20 mm bore steel tubing 116 (b) 25 mm bore steel tubing 117 (d) 40 mm bore steel tubing 118 (e) 50 mm bore steel tubing 119 (f) 80 mm bore steel tubing 120 Supply and FixingGI tubingmedium grade including provision of fittings like Tee,Bend,Socket,Elbow, Short pieces connectors, plugs, unions, etc and accessories on walls/roofs all as specified and directed by Engineer-in-Charge of following bore sizes:- 121 (a) 20 mm bore steel tubing 122 (b) 25 mmbore steel tubing 123 (d) 40 mm bore steel tubing 124 (e) 50 mm bore steel tubing 125 Monthly testing of potable water samples for checking fitness for drinking purposeat the district water testing lab complete all as specified and directed. 126 Monthly testing of raw water/potable water samples for checking fitness for domestic consumption at the district water testing lab complete all as specified and directed. 127 Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2,for iron pipe of following sizes complete all as specified and directed. 128 (a) 20 mm bore 129 (b) 25 mmbore 130 (c) 32 mmbore 131 (d) 40 mm bore 132 (e) 50 mm bore 133 Supply and fix in repairbrass float valve, ISI marked high pressure with polythene float and fly nut complete, screwed of following size / bore including necessary GI fittings such as elbow, reducer, nipple complete all as specified and directed. 134 (a) 20 mm dia 135 (b) 25 mm dia 136 (c) 40 mm dia 137 (d) 50 mm dia 138 Supply and fix Pressure gauge 5 dia, 0 to 14 Kg/cm2 range fixing on delivery pipe of pump set and removing existing defective pressure gauge and taken as credit complete all as specified and as directed. 139 Supply and fixsluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindlewith nut, long body, class P N 1.6, conforming to IS 14846 of 2000 for following sizesincluding all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed by Eng-in-Charge of following sizes. 140 (a) Sluice Valve, Class PN 1.6, 63mm dia 141 (b) Sluice Valve, Class PN 1.6, 80mm dia 142 (c) Non Return Sluice Valve, 80mm dia 143 Supply and fixFoot Valve screwed / flanged including necessary fittings like connectingflanges of following sizes. 144 (a) Foot Valve 50 mm dia 145 (b) Foot Valve63 mm dia 146 Replacement of GI flange having holes(ISI marked) suitable for 40mm bore pipe including jointing material such as rubber gasket bolt units and washers etc in place of unserviceable all as directed. 147 All as per item No.106 above but Suitable for 50 mm bore pipe 148 All as per item No.106 above but Suitable for 80 mm bore pipe 149 Replacement of GI union of both end lock nut screwed with leak proof washer connected to existing GI tubing of 20mm bore completeall as directed. 150 All as per item No.109 above but Suitable for 25 mm bore pipe 151 All as per item No.109 above but Suitable for 40 mm bore pipe 152 All as per item No.109 above but Suitable for 50 mm bore pipe 153 Material and labour forby scraping / cleaning with wire brushes to remove the old painting from pump, motor, coupling guard, MS common base frame and painting with two coats of synthetic enamel paint of approved quality over a coat of red oxide primer as specified below here in after for pump sets:-(a)Motor and pump - Smoke Grey colour (b) Coupling guard and motor air grill - Post office Red colour.(c)Common base frame - Black colour (d)Suction line and delivery line in side pump house - Navy blue colour for fresh water pipe lines. 154 Taking down defective mono block / Centrifugal pump setfrom foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and replacement of base foundation nuts and bolts and re-installing ,necessary electrical connection and testing for satisfactory performance complete all as specified and directed by Engineer - in - Charge.for electric driven pump set of 1 / 2 HP capacity Note:- (i) The rate quoted for this item shall includes labour charge only for main repair and replacement of defective/UNSV spares/accessories. Spares are to measured and paid separately under subsequent items.(ii) Cost of other minor items/spares such as nut, bolts washers, gaskets,etc which are not covered under Sch A but required for effective functioning of the plant shall be deemed to included in this item. (ii) The cost of spares shall be paid under relevant items given below(iii)In case of any damage to thepipes during the time of removal of the pump set ,contractor shall be responsible for repairing the same without any extra cost to the government. 155 Rewinding of motorcoil complete as per IS-396 of 1953 using super enamelled copper wire ofadequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional. 156 Supply onlyBall bearings (drive and non drive end)Make 157 Supply onlyElectro dynamically balanced bronze impeller 158 Supply onlyImpeller Key 159 Supply onlyWater Seal 160 Supply only Terminal connection with terminal box 161 Supply only Condensor suitable capacity / MFD 162 All as per item No 114 herein before but pump set of capacity 3 HP Note: The cost of spares shall be paid under relevant items given below as Supply only. 163 Rewinding of motorcoil complete as per IS-396 of 1953 using super enamelled copper wire ofadequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional. 164 Supply only Ball bearing (Drive and Non drive end) 165 Supply only Cooling fan blade 166 Supply only Cooling fan cover with suitable screws 167 Supply only Terminal box with terminal connection 168 Supply only Electric dynamically balanced bronze impeller 169 Supply only Shaft mild steel 170 Supply only Gun Metal bush 171 Supply only Gland cup with bolts and nuts 172 Supply only Flange drilled suitable size with bolts, nuts and washersincluding rubber gasket 173 Supply only Air cock nozzle brass 174 Supply only Shaft coupling 175 Supply only chlorine test kit. 176 Supply only impeller key 177 Supply only water seal 178 Supply only Condensor of suitable capacity/MFD 179 Supply only Calcium Hypochlorite 65% to 70% Chlorine content in granular form (Calcium based Granular disinfectant for water treatmentof drinking water ). Packed in 45 Kgs each Drum. Make:- Sree Rayalaseema Hi Strength Hypo Ltd.(Brand :- PURI CHLOR)or approved by NMPT Committee of E-in-Cs Branch.Note:- The contractormust submit the NSF Certificate of the product, FSSAI Registration and COC (Certificate of Compliance) in original from manufactures by All India Authorized MES Distributor for each batch of product delivered indicating. Including chemical analysis report by all India authorized MES Distributor. Product must have min. 65% Chlorine Contents suitable for Human Consumption. 180 Material and Labour Cleaning valve chamber of any size by removing all unwanted particles such as mud, sand, dust, dirt, decayed leaves etc. and applying two coats of white wash to all internal and external surfaces of valve chamber all as directed by Engineer-in-charge. 181 Material and labour for disconnectany size/ model of pump set from the foundation bed to carry out minor repair work such as greasing, gland rope packing, nut & bolts, washers and flanged and complete the correctrotational alignment for smooth functioning all as directed by the Engr-in- charge. 182 Supply and fix Gland rope (graphite rope ) (size 1/2,1/4,3/4) suitable for pump size 1 HP-5 HPincluding taking out old unserviceable all as directed. 183 Supply and fix Gland rope (graphite rope ) (size 1/2,1/4,3/4) suitable for pump size 2HP-5 HPincluding taking out old unserviceable all as directed. 184 Supply and fix Gland rope (graphite rope ) (size 1/2,1/4,3/4) suitable for sluice valve 63/80mm diaincluding taking out old unserviceable all as directed. 185 Removal of dust and cleaning the Earth pitand washingthe same, applying one coat of white wash , writing the letters such as for Pump set Numberas required at sitewith enamel paint of black colour on pit cover complete all as specified and as directed. 186 Material and labour for Sub main wiring with four runs single core 4sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and two runs of 4 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit, 25mm dia/PVC casing capping 32 mmand conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and directed.Note: Four runs of 4sqmm and two runs of 4 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. 187 Cutting existing bituminous road and excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth by cutting existing bituminous road not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in any type ofsoil, complete all as specified 188 Demolition of cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. 189 Material and labour for 100 mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate for making good the disturbed road surface after laying of pipe line over returned filled and compacted earth surface to match with existing road level complete all as specified and as directed. 190 Material and labour for preparation of new steel surface and applying two coats of approved colour synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 191 Material and labour for attending breakdown complaints like no water supply in service tank, pipe line leakages etc and also removing air lock in OTM/Single living accommodations with help of required tools and man power with items like GI fittings of any size/dia, union, elbow, tee, bend, nipple, socket etc including excavation upto 1.0 cum if required for rectification of leakage of GI pipe all as specified and directed.Note:-(i) Rate of items like union, elbow, nipple ,coupler, bend socket shall be included in the unit quoted rate.(ii) Rate of excavation upto 1 cum shall be included in the unit quoted rate. 192 Taking down defective mono block / Centrifugal pump setfrom foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and replacement of base foundation nuts and bolts and re-installing ,necessary electrical connection and testing for satisfactory performance complete all as specified and directed by Engineer - in - Charge.for electric driven pump set of 5 HP capacity Note:- (i) The rate quoted for this item shall includes labour charge only for main repair and replacement of defective/UNSV spares/accessories. Spares are to measured and paid separately under subsequent items.(ii) Cost of other minor items/spares such as nut, bolts washers, gaskets,etc which are not covered under Sch A but required for effective functioning of the plant shall be deemed to included in this item. (ii) The cost of spares shall be paid under relevant items given below(iii)In case of any damage to thepipes during the time of removal of the pump set ,contractor shall be responsible for repairing the same without any extra cost to the government. Note: The cost of spares shall be paid under relevant items given below as Supply only. 193 Rewinding of motorcoil complete as per IS-396 of 1953 using super enamelled copper wire ofadequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional. 194 Supply only Ball bearing (Drive and Non drive end) 195 Supply only Cooling fan blade 196 Supply only Cooling fan cover with suitable screws 197 Supply onlyTerminal box with terminal connection 198 Supply only Electric dynamically balanced bronze impeller 199 Supply only Flange drilled suitable size with bolts, nuts and washers including rubber gasket 200 Supply only Air cock nozzle brass 201 Supply only Shaft coupling 202 All as per Slitem No : 152herein before but defective open well submersible pump set of capacity1 HP/2 HP1 Ph, 240 Voltsincluding taking up the pump set fromopen well/UG sump after disconnecting the electrical and pipeline connection, completewithout any damage to the pump set or thepipes and transporting to workshop including repair/replacement of worn out parts, servicing and overhauling complete with oiling/greasing, lubricating the parts and reassembling and painting of submersible pump set with motor with two coat of synthetic enamel paint over a coat of red oxide after clearing and scrubbing and shifting back to bore well, lowering commissioning and testing on full load complete all as specified and directed by Engineer-in-charge.Note: In case of any damage to thepipes during the time of removal of the pump set ,contractor shall be responsible for repairing the same without any extra cost to the government. 203 Rewinding of motorcoil complete as per IS-396 of 1953 using super enamelled copper wire ofadequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional. 204 Supply only Thrust bearing 205 Supply only Electro dynamically balanced bronze impeller 206 Supply only Gun Metal bush 207 Supply only Gland Cup with bolts and nuts 208 Supply only GI Flange drilled suitable size bolts, nuts, washers and rubber gasket 209 Supply only Shaft Mild steel 210 Supply only Rotor sleeve 211 All as per Slitem No 152 herein before but pump set capacity 5 HP . Note: The cost of spares shall be paid under relevant items given below as Supply only. 212 Rewinding of motorcoil complete as per IS-396 of 1953 using super enamelled copper wire ofadequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional. 213 Supply only Thrust bearing 214 Supply only Electro dynamically balanced bronze impeller 215 Supply only Gun Metal bush 216 Supply only Gland Cup with bolts and nuts 217 Supply only GI Flange drilled suitable size bolts, nuts, washers and rubber gasket 218 Supply only Shaft Mild steel 219 Supply only Rotor sleeve 220 All as per Slitem No 152 herein before but Non- clogging submersible pump set capacity 7.5 HP . Note: The cost of spares shall be paid under relevant items given below as Supply only. 221 Rewinding of motorcoil complete as per IS-396 of 1953 using super enamelled copper wire ofadequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional. 222 Supply only Thrust/ball bearing 223 Supply only Electro dynamically balanced bronze impeller 224 Supply only Cooling fan blade 225 Supply only terminal box with terminal connectors 226 Supply only Shaft Mild steel 227 Supply only Gun Metal bush 228 Cleaning the internal and external surface of UG sump / Static water tankof capacity up to 10000 gallons and well by scrapping/brushing and removing all silt dust etc from walls, floors, clean with water and bleaching powder and applying one coat of lime wash to all internal surfaces and complete removal of sand,dust.dirt and other unwanted coatings from the exterior wall surfaces by suitable means and painting with weather proof oil bound distemper to complete side wall and top surface of sump including writing particulars such as capacity of sump, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to incoming and outgoing pipe lines and valves/valve chambers with approved colour (Pipe line exposed above surface) of any size complete all as directed 229 Cleaning the internal and external surface of Shallow well of size 4.50 mtr dia. and 6 mtr depth by scrapping/brushing and removing all silt dust etc from walls, floors, clean with water and bleaching powder and applying one coat of lime wash to all internal surfaces and complete removal of sand,dust.dirt and other unwanted coatings from the exterior wall surfaces by suitable means and painting with weather proof oil bound distemper to complete side wall of shallow well including writing particulars such as depth of shallow well, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting topipe lines and valves with approved colour (Pipe line exposed above surface) of any size complete all as directed 230 Cleaning the internal and external surface of deep Open well of size 7-10 mtr dia. and 10-15 mtr depth by scrapping/brushing and removing all silt dust etc from walls, floors, clean with water and bleaching powder and applying one coat of lime wash to all internal surfaces and complete removal of sand,dust.dirt and other unwanted coatings from the exterior wall surfaces by suitable means and painting with weather proof oil bound distemper to complete side wall of shallow well including writing particulars such as depth of shallow well, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting topipe lines and valves with approved colour (Pipe line exposed above surface) of any size complete all as directed 231 Cleaning the internal surfaces of Over Head Tank at 45 m height / staging by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and ceilings complete including writing particulars such as capacity of OH tank, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to incoming and outgoing pipe lines and valves/valve chambers with approved colour (Pipe line exposed above surface) of any size complete all as directed all as directed by Engineer-in-charge for 100000 Litres capacity 232 Cleaning the internal surfaces of Over Head Tank at 15 m height / staging by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and ceilings complete including writing particulars such as capacity of OH tank, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to incoming and outgoing pipe lines and valves/valve chambers with approved colour (Pipe line exposed above surface) of any size complete all as directed all as directed by Engineer-in-charge for 15000 Ltr capacity. 233 NOTE FOR SL ITEM NO 188 TO 192 -1. T & P for dewatering UG Sump / Static Tank has to be arranged by the contractor. Rate quoted is inclusive of material and labour required for dewatering. Nothing extra shall be paid separately. 2. All the operations should be executed by trained workers and technicians, properly dressed along with gum boots, safety harness to work as per the direction of Engineer in charge. Contractor shall bring suitable fittings to connect cleanout pipe and suitable length pipe using cleanout facility if available and operational without damaging water tank. Nothing extra shall be paid separately. Contractor shall be responsible for complete cleaning, suction, disposal activity and thereafter. Any damages to water tank during cleaning operation shall be repaired by the Contractor with no cost to MES. Contractor shall ensure and implement safe working conditions for his laborers during execution , all necessary safety measures and harness shall be used before taking-up work. Suitable lighting and ventilation should be provided by the contractor before cleaning of covered tanks. Agency shall be solitary responsible for the lapses in the safety during the work and allied compensations. Nothing extra shall be paid separately, etc. complete as per direction of Engineer In-charge. 234 Supply and fix Three phase direct online starter, suitable for 1 HP - 5 HP Pump/motor including necessary electrical connections and taking down old unserviceable all as directed. 235 Supply and fix Three phase direct online starter , suitable for7.5 HP Pump/motor. including necessary electrical connections and taking down old unserviceable all as directed. 236 Supply and fixSingle phase direct online starter, suitable for0.5 - 2 HP Pump/motor including necessary electrical connections and taking out old unserviceable all as directed. 237 Supply and fix single phase preventer 3 phase 415 voltsincluding taking out old unserviceable all as directed.. 238 Material and Labour Cleaning rain water collection well (depth 3 mtr: meant for collection of rain water and pumping away the collected water by submersible pumps of 7.5 HP during rainy season) by removing all unwanted particles such as mud, sand, dust, dirt, decayed leaves etc. and applying two coats of white wash to all internal and external surfaces of collection well including painting of submersible pumps 7.5 HP and connected pipe lines ( 2 Pump sets in each rain water collection chamber) with synthetic enamel paint of approved colour all as directed by Engineer-in-charge. 239 Supply and fix Gland rope (graphite rope ) (size 1/2,1/4,3/4) suitable for pump size 2HP-5 HPincluding taking out old unserviceable all as directed. 240 Supply and fix Gland rope (graphite rope ) (size 1/2,1/4,3/4) suitable for Sluice valves 63/80mm dia including taking out old unserviceable all as directed. 241 Supply and connecting flat three core, PVC insulated industrial Flat cable for submersible motor, 4 sqmm (Nominal area) with multi stranded copper conductor, 1100 volts grade connected from starter to submersible pump motor complete all as specified and directed. 242 Supply and connecting flat three core, PVC insulated industrial flat cable for submersible motor, 6 sqmm (Nominal area) with multi stranded copper conductor, 1100 volts grade connected from starter to submersible pump motor complete all as specified and directed. 243 Cutting existing bituminous road and excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth by cutting existing bituminous road not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in any type ofsoil, complete all as specified 244 Material and labour for rendering 10mm thickin cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and as directed by the Engineer-in-Charge. 245 Material and labour for providing cement concrete 1:2:4 Type B0 using 12.5mm graded aggregate as in copings, complete all as specified and as directed by the Engineer-in-Charge. 246 Material and labour for fixing valve chamber cover in replacement, fabricated from MS sheet 3mm thickness, fixing Angle at all sides, with two Nos of hinges and one No. handle made out of MS round bar 10mm dia with necessary locking arrangement complete all as specified and as directed by the Engineer-in-Charge.
Contract Date: Feb 07, 2026 Contract Value : ₹ 32.56 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
15.
Petroleum and Natural Gas #9544088 Technical Bid
Tender For Composite Works For Ambient Air Heating System Project At Kll Dabhol; 1 PIPING-OFFSITES 2 PIPING (ABOVE GROUND) :-Transportation of all piping items from Owners storage point to work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, pipe spools, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, and laying of pipes and pipe spools (spools along with supports) of all types and thickness over sleepers, overhead on racks and at all elevations, hook-ups with existing piping, connecting with equipment nozzles, strainers, steam traps, static mixers, sight flow indicators, thermal sleeve, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, sample coolers, closed sample system cabinets etc. and fixing of gaskets, bolts, nuts including application of torque wherever requiredandall other inline instruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer and blinds, piping specials such as mitres and fabricated fittings, vents, drains (but excluding reinforcingpads), SW valves upto 1.5 NB, Steam Supply/ Condensate Recovery stations(Cast/Fabricated), Supplyandwelding of Strip as per EIL Std 7-51-0112 to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaningandflushing by water/compressed air,hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified draining, drying by compressed air, performing Positive Material Identification(PMI) using alloy analysers, completing all such works in all respects (including preparation of isometrics as mentioned in the Scope of Work for the job) as per the specifications, drawings and instructions of Engineer-in-Charge. PMI shall be performed by third party as defined in PMI spec.Rates for tubing (if any) shall include rates for valves, fittings, all in line instruments and testing etc. Carbon steel piping includes LTCS piping also. Erectionof all inline instruments like flow instrumentsandspecialty items like static mixers, sample coolers, thermal sleeve, air mixers, exhaust head, rupture disk, flow meters, venturi tube, flame arrestor, thermal flow switch etc. except valve shall be considered as part of piping and separate payment shall not be made on this account. Note : Contractor to refer to Instrumentation SOR for specific details and rates of Instrumentation items not covered herein. 3 CARBON STEEL PIPING (NON IBR); THK. <= 10MM 4 FABRICATION (BUTT WELD- MANUAL) 5 NB UPTO 1.5 INCH 6 NB 2 INCH - 6 INCH 7 NB 8 INCH - 14 INCH 8 NB 16 INCH - 24 INCH 9 NB 26 INCH - 36 INCH 10 FABRICATION (FILLET WELD) 11 NB UPTO 1.5 INCH 12 ERECTION (OTHER THAN SPOOL) 13 NB UPTO 1.5 INCH 14 NB 2 INCH - 6 INCH 15 NB 8 INCH - 14 INCH 16 NB 16 INCH - 24 INCH 17 NB 26 INCH - 36 INCH 18 CARBON STEEL PIPING (NON IBR); THK. > 10MM AND <= 20MM 19 FABRICATION (BUTT WELD- MANUAL) 20 NB 8 INCH - 14 INCH 21 NB 16 INCH - 24 INCH 22 NB 38 INCH - 48 INCH 23 ERECTION (OTHER THAN SPOOL) 24 NB 8 INCH - 14 INCH 25 NB 16 INCH - 24 INCH 26 NB 38 INCH - 48 INCH 27 STAINLESS STEEL PIPING (NON-IBR); THK. <= 10MM 28 FABRICATION (BUTT WELD- MANUAL) 29 NB UPTO 1.5 INCH 30 NB 2 INCH - 6 INCH 31 FABRICATION (FILLET WELD) 32 NB UPTO 1.5 INCH 33 ERECTION (OTHER THAN SPOOL) 34 NB UPTO 1.5 INCH 35 NB 2 INCH - 6 INCH 36 VALVES :- Transportation of all types of valves (Including special valves and motor operatedvalves) from Owners storage points to contractors stores/worksite and installation of valvesfor all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. Note : For PRDS, PSVs, TSVs, Control valves, On-Off/Shutdown valvesandSelf actuating valves all details and rates shall be as per Instrumentation SOR. 37 FLANGED/WAFER VALVES INCLUDING MOV (UPTO 600#) 38 NB2.000 INCHES 39 NB3.000 INCHES 40 NB4.000 INCHES 41 NB6.000 INCHES 42 NB8.000 INCHES 43 NB 10.000 INCHES 44 NB 12.000 INCHES 45 NB 20.000 INCHES 46 NB 24.000 INCHES 47 NB 42.000 INCHES 48 SPRING SUPPORT ASSEMBLIES :- Transportation of all types of spring support assemblies from Owners storage points to contractors stores/worksite and installation of spring support assemblies for all rating including assembly, if any, fixing of gaskets bolts/nuts, welding attachments wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. Contractor to ensure that travel stops are removed and spring is locked in cold load position for Hydrotest. It shall be ensured that locking devices are removed and springs are properly set at hot load position during commissioning. 49 SOR Sl. No.: 49 || PART NO: 0 || SOR NO: B861-000-16-43-PK-SOR-3001-0-0M ||ITEM NO: M21901000000 50 BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types of piping as called for in EIL Specification No.6-76-0002 on already erected system including supply of all materials, recording devices, instruments etc; Providing all normal and special equipment and gadgets, skilled / un skilled labour, specialist, supervisory staff and completing the work in all respects as per specifications and instructions of engineer-in-charge. some joints may require bolt tensioning more than once, but, payment for one joint shall be made only once. 51 150# JOINTS 52 NB 12.000 INCHES 53 NB 16.000 INCHES 54 NB 18.000 INCHES 55 NB 20.000 INCHES 56 NB 24.000 INCHES 57 NB 42.000 INCHES 58 300# JOINTS 59 NB 12.000 INCHES 60 NB 24.000 INCHES 61 REINFORCING PADS FOR PIPES :- Fabrication ofreinforcingpads for pipeconnection wherever required (from pipes only suppliedbytheOwner) and erection, fitup, weldingandtesting (including DP/MP) if required of the same and performing Positive Material Identification(PMI) using alloy analysers as per the specifications, drawings and instructions ofthe Engineer-in-Charge. Note: Sizes mentioned forReinforcing Pads are for branch pipe 62 C.S REINFORCING PADS 63 NB2.000 INCHES 64 NB3.000 INCHES 65 NB6.000INCHES 66 NB8.000 INCHES 67 NB 10.000INCHES 68 NB 12.000 INCHES 69 NB 18.000INCHES 70 NB 24.000 INCHES 71 NB 28.000 INCHES 72 RADIOGRAPHY :- Performance of radiographic inspection on piping of all typesandthicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specificationsand instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractors fault and for additional radiography necessitated due to poor performance of contractors welders shall be done at contractors cost) Note: Unit for radiography quantity is Nos of circumferencial weld joints. 73 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF JOB NDE SPECIFICATION) 74 NB0.750 INCHES 75 NB1.000 INCHES 76 NB1.500 INCHES 77 NB2.000 INCHES 78 NB3.000 INCHES 79 NB4.000 INCHES 80 NB6.000 INCHES 81 FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE SPECIFICATION/AS/SS) 82 NB2.000 INCHES 83 FOR JOINTS ABOVE THK. 8MM 84 NB8.000 INCHES 85 NB 12.000 INCHES 86 NB 18.000 INCHES 87 NB 24.000 INCHES 88 NB 42.000 INCHES 89 DYE PENETRATION/MAGNETIC PARTICLE TEST :- Performance of magnetic particle/ dye penetrant test including supply of all necessary materials, equipment and labour for carrying out the work as per specification and directions of Engineer-in-Charge. 90 DYE PENETRANT TEST 91 MAGNETIC PARTICLE TEST 92 PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY OWNER) :- Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides,special supports, pads(including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply and application one coat of primer, all necessary equipments, consumables, labour,returning surplus materials and scrap etc to owners storage points and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; andadjustment/ alignment during precommisioning, commisioning as per the instructions ofEngineer-in-charge. Fabrication of extension of spindle for valves, provision of locking arrangement, etc. shall also be considered under this item. 93 DUMMY PIPE SUPPORTS FOR C.S (OWNER SUPPLIED) 94 DUMMY PIPE SUPPORTS FOR S.S (OWNER SUPPLIED) 95 PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY CONTRACTOR) :- Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides,special supports, pads(including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply and application one coat of primer, all necessary equipments, consumables, labour, and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; andadjustment/ alignment during precommisioning, commisioning as per the instructions ofEngineer-in-charge. Fabrication of extension of spindle for valves, provision of locking arrangement, etc. shall also be considered under this item. 96 C.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED) 97 S.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED) 98 DUMMY PIPE SUPPORTS FOR C.S (CONTRACTOR SUPPLIED) 99 DUMMY PIPE SUPPORTS FOR S.S (CONTRACTOR SUPPLIED) 100 WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLD LINES :- Supply, shaping, positioning and fixing of cold line supports as per EIL pipe support standard having the following specifications: Wood specification:Hard wood, chemically treated with creosote under pressure. Quality of wood to conform class-I durability as per IS-3629 & Grade-I timber of Group-A withpermissible compression strength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6 NB : 240 kg/cm3 Density for lines above 6 NB : 320 kg/cm3 101 WOODEN BLOCKS 102 HIGH DENSITY (240 Kg/Cu.M) PUF BLOCKS 103 HIGH DENSITY (320 Kg/Cu.M) PUF BLOCKS 104 CHEMICAL CLEANING/PICKLING :- Cleaning and pickling of equipment/pipeline includng preparation of circulation loop, supply of temporary piping, pumps, heater coils, gaskets, thermometer, hydrometer, valve, test coupon, spares, laboratoryfacilities, with all accessories for conducting test, chemicals, safety accessories and also providing or hiring all necessary equipment and whatever else even though not expressly mentionedhereinandinspecificaions but required to perform the work as per specifications and instructions ofEngineer-in-Charge. 105 PASSIVATION OF COOLING WATER LINES 106 NB0.500 INCHES 107 NB0.750 INCHES 108 NB1.000 INCHES 109 NB1.500 INCHES 110 NB2.000 INCHES 111 NB3.000 INCHES 112 NB4.000 INCHES 113 NB6.000 INCHES 114 NB8.000 INCHES 115 NB 10.000 INCHES 116 NB 12.000 INCHES 117 NB 14.000 INCHES 118 NB 16.000 INCHES 119 NB 18.000 INCHES 120 NB 20.000 INCHES 121 NB 24.000 INCHES 122 NB 42.000 INCHES 123 FABRICATION & ERECTION OF BLINDS/SPECTACLE BLINDS/SPACER & BLINDS ETC. :- Transportation from owners storage point to work site, fabrication and erection of blinds, spectacle blinds, spacers & blinds of all ratings from plate material of all thicknesses supplied by owner as free issue; cutting, edge preparation, rolling, fit up, welding, cleaning, testing (hydrotesting, MP/DP, radiography), wherever required bolts nuts & gaskets including supply of necessary equipment, consumables, labour etc as per standards / specifications and directions of Engineer-in-charge 124 BLINDS 125 NB0.750 INCHES 126 NB1.000 INCHES 127 NB1.500 INCHES 128 NB2.000 INCHES 129 NB3.000 INCHES 130 NB4.000 INCHES 131 NB6.000 INCHES 132 NB8.000 INCHES 133 NB 12.000 INCHES 134 NB 24.000 INCHES 135 NB 42.000 INCHES 136 SPECTACLE BLINDS 137 NB2.000 INCHES 138 NB3.000 INCHES 139 SPACERS & BLINDS 140 NB 24.000 INCHES 141 NB 42.000 INCHES 142 SUPPLY OF STUDS ALONG WITH NUTS: Supply as per Technical Notes for Fasteners (6-44-0057) from Vendor enlisted in Project Master Supplier List of Studs along with two nutsfor diameter < 1 and 3 nuts for diamemter >= 1of nuts, as per the direction of Engineer in-charge. All Alloy steel fasteners used in SS Piping shall be Hot Dip Galvanized. 143 AS FASTENERS(ASTM A193 GR.B7/B7M/A194 GR.2H/2HM) 144 MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owners storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. 145 FLAME CUTTING C.S PIPINGIBR/NON IBR 146 HACKSAW CUTTING C.S PIPINGIBR/NON IBR 147 BEVELLINGC.S PIPINGIBR/NON IBR 148 FITUP & WELDINGC.S PIPINGIBR/NON IBR 149 FLAME CUTTINGS.S PIPINGIBR/NON IBR 150 HACKSAW CUTTINGS.S PIPINGIBR/NON IBR 151 BEVELLINGS.S PIPINGIBR/NON IBR 152 FITUP & WELDINGS.S PIPINGIBR/NON IBR 153 REMOVAL ERECTED PIPING(ABOVE GROUND) :- Removal of piping existing/ erected including SW valves for modification as required as per Drawings/P and IDs/instructions of Engineer-in-charge at all elevations, including providing assistance to owner for draining, cleaning and purging of the lines to be removed , unbolting of flanged joints /cutting of pipe lines wherever required, installation of flanges and blind flanges, removal of insulation from insulated lines, removing supports, steam tracers, all fittings and flanges, instruments etc, cutting of pipes in appropriate length for transporting purposes, cleaning, flushing, drying and transporting all materials to storage point(within the complex battery limits) designated by Owner/EIL including stacking of material and disposing of waste etc as instructed by Engineer-in-charge. 154 C.S/A.S PIPING 155 S.S PIPING 156 REMOVAL OF ERECTED VALVES (ABOVE GROUND) :- Removal of all types and ratings of valves by unbolting, cutting etc. as required, cleaning by flushing with water/air etc. asrequiredand transportation of the same to Owners storage point (within thecomplex battery limits) and stacking as per instructions of Engineer-in-Charge. 157 VALVES OTHER THAN CONTROL VALVES 158 NB0.500 INCHES 159 NB0.750 INCHES 160 NB1.000 INCHES 161 NB1.500 INCHES 162 NB2.000 INCHES 163 NB3.000 INCHES 164 NB4.000 INCHES 165 NB6.000 INCHES 166 NB8.000 INCHES 167 NB 10.000 INCHES 168 NB 12.000 INCHES 169 NB 24.000 INCHES 170 NB 42.000 INCHES 171 LOW FRICTION PADS: Supply, fabrication and fixing of low friction pads with suitable bonding materials / fasteners, as specified in Drawings / Isometrics / Special support sketches. 172 TEFLON PAD WITH COMPRESSIVE STRENGTH (0.25 OFFSET) :1870 PSI 173 GRAPHITE PAD WITH COMPRESSIVE STRENGTH : 2877 PSI 174 PRE-COMMISSIONING / COMMISSIONING ASSISTANCE : Carrying out Pre-commissioning / Commissioning activities such as dropping the valves, control valves and spool pieces, air and water flushing and air-blasting, steam blowing, air drying, re-installing the valves, control valves and spool pieces, leak testing etc. as per pre-commissioning / commissioning specification/ procedure and instruction of Engineer-in-charge including supply of necessary hand tools, equipments/ machinery, consumables (electrodes, filler wire, gas, card board, target plate, scaffolding etc. wherever required) and with single point responsibility of Contractors supervision.Note : This manpower will be utilized forPre-commissioning & Commissioning requirement over and above that already described elsewhere in this SOR.One Man day is 12 hour duty. 175 SKILLED (WITH HAND TOOLS, EQUIPMENT/MACHINERY, CONSUMABLES) 176 SEMI SKILLED (WITH HAND TOOLS) 177 HELPER/ UNSKILLED 178 PIPE DAVITS :Supply, fabrication & erection of pipe davits as per EIL std. 7-12-023 for lowering of aircooler motors/safety valves from structural platforms, fixing the same to platforms, inspection as per specs., supply of all necessary materials, equipment, consumables, labour,supervision etc. The work shall be carried out as per the specifications, drawings & instruction of engineerincharge. 179 SOR Sl. No.: 179 || PART NO: 0 || SOR NO: B861-000-16-43-PK-SOR-3001-0-0M ||ITEM NO: M25201000000 180 SUPPLY OF BULK PIPING ITEMS :- Procurement andsupply of following bulk piping items to site/ownersstorage, transportation to work site/fabrication shop.Procurement shall be done as per EIL specifications andfrom Client/EIL approved suppliers.Contractor shall establish quantities from drawingsconsidering wastage, cutting allowance, escalation &spares required by Client 181 PIPES 182 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 0.5 INCH, S160 183 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 0.75 INCH, S160 184 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 1.0 INCH, XS 185 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 1.5 INCH, XS 186 PIPE, B-36.19, ASTM A 312 TP304, PE, SEAMLESS, 0.5 INCH, 80S 187 PIPE, B-36.19, ASTM A 312 TP304, PE, SEAMLESS, 0.75 INCH, 80S 188 PIPE, B-36.19, ASTM A 312 TP304L, PE, SEAMLESS, 0.75 INCH, 80S 189 FLANGES 190 FLNG.SW, B-16.5, ASTM A 105, 300, RF/125AARH, 1.0 INCH, XS 191 FLNG.SW, B-16.5, ASTM A 105, 300, RF/125AARH, 1.5 INCH, XS 192 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 0.75 INCH, S160 193 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 1.0 INCH, XS 194 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 1.5 INCH, XS 195 FLNG.WN, B-16.5, ASTM A 182 GR.F304, 150, RF/125AARH, 0.75 INCH, 80S 196 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 0.75 INCH 197 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 1.0 INCH 198 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 1.5 INCH 199 FLNG.BLIND, B-16.5, ASTM A 105, 300, RF/125AARH, 1.0 INCH 200 FLNG.BLIND, B-16.5, ASTM A 182 GR.F304, 150, RF/125AARH, 0.75 INCH 201 FITTINGS 202 ELBOW.90, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 203 ELBOW.90, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 204 ELBOW.90, B-16.11, ASTM A 105, SW, 6000, 0.75 INCH 205 ELBOW.90, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 206 T.EQUAL, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 207 T.EQUAL, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 208 T.RED, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH, 0.75 INCH 209 SWAGE.CONC, BS-3799, ASTM A 105, PBE, 0.75 INCH, S160, 0.5 INCH, S160 210 CPLNG.FULL, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 211 CPLNG.FULL, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 212 CPLNG.HALF, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 213 CPLNG.HALF, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 214 CPLNG.HALF, B-16.11, ASTM A 105, SW, 6000, 0.75 INCH 215 CPLNG.HALF, B-16.11, ASTM A 182 GR.F304, SW, 3000, 0.75 INCH 216 CPLNG.LH, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 217 VALVES 218 VLV.GATE, SHEET 51001, 0.5 INCH 219 VLV.GATE, SHEET 51001, 0.75 INCH 220 VLV.GATE, SHEET 51001, 1.0 INCH, LOCK OPEN 221 VLV.GATE, SHEET 51001, 1.0 INCH 222 VLV.GATE, SHEET 51001, 1.5 INCH, LOCK OPEN 223 VLV.GATE, SHEET 51001, 1.5 INCH 224 VLV.GATE, SHEET 51007, 0.75 INCH 225 VLV.GATE, SHEET 51045, 0.5 INCH 226 VLV.GATE, SHEET 51045, 0.75 INCH 227 VLV.GLOBE, SHEET 52001, 1.0 INCH 228 VLV.GLOBE, SHEET 52007, 1.0 INCH 229 VLV.CHECK, SHEET 53001, 1.0 INCH 230 VLV.CHECK, SHEET 53007, 1.0 INCH 231 VLV.CHECK, SHEET 53050, 0.75 INCH 232 GASKETS 233 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 0.75 INCH 234 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 1.0 INCH 235 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 1.5 INCH 236 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 300, 1.0 INCH 237 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 300, 1.5 INCH 238 FASTENERS 239 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.5 INCH X 2.5 INCH 240 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.5 INCH X 2.75 INCH 241 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.0 INCH 242 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.25 INCH 243 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.5 INCH 244 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.75 INCH 245 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 4.0 INCH 246 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 3.5 INCH 247 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 4.0 INCH 248 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 4.25 INCH 249 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7(HDG), A194 GR.2H(HDG), 0.5 INCH X 2.5 INCH 250 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7(HDG), A194 GR.2H(HDG), 0.625 INCH X 3.25 INCH 251 CLOSE PROXIMITY RADIOGRAPHY:-Performance of radiographic inspection on piping of all types & thicknesses includingproviding or hiring of all necessary equipment and whatever else even though notexpressly mentioned but required to perform the work as per specification andinstructions of Engineer-in-Charge by using SELENIUM& IRIDIUM source basedradiography system. Radiography shall be submitted tothe Engineer-in-charge.(Repeat Radiography due todefective radiograph on reparired joints due toContractors fault and for additional radiographynecessitated due to poor performance of contractorswelders shall be done at contractors cost).Note: Unit for radiography quantity is Nos ofcircumferencial weld joints, and rates are also inclusive of scaffoldings wherverrequired. 252 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF JOB NDE SPECIFICATION) 253 NB0.750 INCHES 254 NB1.000 INCHES 255 NB1.500 INCHES 256 NB2.000 INCHES 257 NB3.000 INCHES 258 NB4.000 INCHES 259 NB6.000 INCHES 260 FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE SPECIFICATION/AS/SS) 261 NB2.000 INCHES 262 FOR JOINTS ABOVE THK. 8MM 263 NB8.000 INCHES 264 NB 12.000 INCHES 265 NB 18.000 INCHES 266 NB 24.000 INCHES 267 Supply,fabrication and fixing of low friction pad (SS 304 mirror finish) with suitablebonding material/ fasteners as specified in drawing/documents/special supportsketches/isometrics/Gads etc. 268 STAINLESS STEEL 6 MM THK WITH MIRROR FINISH SS304 269 External Chemical Cleaning and Passivation of SSWelds:External chemical cleaning and pickling of SS welds as per latest approved pipingdrawings and as per Job Specification B861-000-06-42-CCS-011. Work shall includesupply of all chemicals, temporary facilities with all accessories for conducting test,safety accessories and also providing or hiring all necessary equipment and whateverelse even though not expressly mentioned herein and in specifications but required toperform the work as per specifications and instructions of Engineer-in-Charge.(Unit ofmeasurement- No. of Joints) 270 NB0.500 INCHES 271 NB0.750 INCHES 272 NB1.000 INCHES 273 NB1.500 INCHES 274 NB2.000 INCHES 275 PAINTING (OFFSITES) :- Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per EIL painting spec., drawings and direction of Engineer-in-Charge for all types of uninsulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified, in such cases finish paints shall also be applied inthe fabrication yard.The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabricationas well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. 276 SURFACE PREP, PRIMER & FINISH COAT FOR CS, AS & LTCS BARE SURFACES FORENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 277 DESIGN TEMP GROUP: -16 TO 80(DEG C)SURFACE PREPARATION:SSPC-SP-10;1coat of F-9 @ 65-75µ DFT/coat, PRIMER: 1 coat of P-6 @ 40µ DFT/coat, FINISH COAT: 2 coats of F-6B @ 100µ DFT/coat + 1 coat of F-2 @ 40µ DFT/coat (2x100 + 40= 240). Total DFT = 345-355. 278 PIPES 279 NB: .5Inches 280 NB: .75 Inches 281 NB: 1 Inches 282 NB: 1.5 Inches 283 NB: 2 Inches 284 NB: 3 Inches 285 NB: 4 Inches 286 NB: 6 Inches 287 NB: 8 Inches 288 NB: 12Inches 289 VALVES 290 NB: .5Inches 291 NB: .75 Inches 292 NB: 1 Inches 293 NB: 1.5 Inches 294 NB: 2 Inches 295 NB: 3 Inches 296 NB: 4 Inches 297 NB: 6 Inches 298 NB: 8 Inches 299 NB: 12Inches 300 SURFACE PREP, PRIMER &FINISH COAT FOR CS & LTCS INSULATED SURFACES FOR ALLENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 301 DESIGN TEMP GROUP: -45 TO 125(DEG C)SURFACE PREPARATION: SSPC-SP-10;1 coat of F-15 @ 75µ DFT/coat, PRIMER: None, FINISH COAT: 2 coats of F-15 @ 75µ DFT/coat. Total DFT = 225 302 PIPES 303 NB: .5Inches 304 NB: .75 Inches 305 NB: 1 Inches 306 NB: 1.5 Inches 307 NB: 2 Inches 308 NB: 3 Inches 309 NB: 4 Inches 310 NB: 6 Inches 311 NB: 8 Inches 312 NB: 12Inches 313 NB: 18Inches 314 NB: 24Inches 315 NB: 28Inches 316 NB: 36Inches 317 NB: 42Inches 318 VALVES 319 NB: .5Inches 320 NB: .75 Inches 321 NB: 1 Inches 322 NB: 1.5 Inches 323 NB: 2 Inches 324 NB: 3 Inches 325 NB: 4 Inches 326 NB: 6 Inches 327 NB: 8 Inches 328 NB: 12Inches 329 NB: 18Inches 330 NB: 24Inches 331 NB: 42Inches 332 SURFACE PREP, PRIMER & FINISH COAT FOR CS, AS & LTCS BARE SURFACES FOR ENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 333 DESIGN TEMP GROUP: -45 TO -15(DEG C)SURFACE PREPARATION:SSPC-SP-10; 1 coat of F-9 @ 65-75µ DFT/ coat. Total DFT = 65-75. 334 PIPES 335 NB0.50 INCHES 336 NB0.750 INCHES 337 NB1.000 INCHES 338 NB1.500 INCHES 339 NB2.000 INCHES 340 NB3.000 INCHES 341 NB4.000 INCHES 342 NB6.000 INCHES 343 NB12.000 INCHES 344 VALVES 345 NB0.50 INCHES 346 NB0.750 INCHES 347 NB1.000 INCHES 348 NB1.500 INCHES 349 NB2.000 INCHES 350 NB3.000 INCHES 351 NB4.000 INCHES 352 NB6.000 INCHES 353 NB12.000 INCHES 354 *************************************************************** LEGENDS / NOTES FOR INSULATION WORKS***************************************************************** Types of Insulation :CC =Cold Conservation Insulation SC =Surface Condensation InsulationH = Heat Conservation InsulationCPP =Cold Personal protectionHPP = Hot Personnel Protection Insulation** Basic Line Surface Materials:CS = Carbon Steel (Including LT Carbon Steel)AS = Alloy SteelSS = Stainless Steel ** Notes : 1. For Insulation specification, refer Job specification for Insulation of Piping and Equipment, B861-000-06-43-IL-S001*************************************************************** 355 COLD INSULATION (OFFSITES) Providing thermal insulation including supply of all insulating andancillary materials, Aluminium foil for SS surfaces, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required , including transportation of materials to work site, duly inspected by 3rd party inspector(Llyods/BV/DNV or any other Client approved party) at manufacturers shop & sample check/inspection at site by EIL Construction inspector,applying insulation on surfaces as specified including all preparatory works there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with cladding as per spec., providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. Providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions ofEngineer-in-charge. (Refer Legend for applicable EIL specification) 356 INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 357 INSULATION TYPE : CC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 358 PIPES 359 NB 00.75 INCHES; THICKNESS25 MM 360 NB 01.00INCHES; THICKNESS25 MM 361 NB 01.50 INCHES; THICKNESS50 MM 362 NB 02.00 INCHES; THICKNESS50 MM 363 NB 06.00INCHES; THICKNESS50 MM 364 NB 08.00INCHES; THICKNESS50 MM 365 NB 012.000INCHES; THICKNESS60 MM 366 NB 018.000INCHES; THICKNESS60 MM 367 NB 24.00 INCHES; THICKNESS60 MM 368 NB 28.00 INCHES; THICKNESS60 MM 369 NB 42.00 INCHES; THICKNESS60 MM 370 FLANGE ASSEMBLIES 371 NB 00.75INCHES; THICKNESS25 MM 372 NB 01.00INCHES; THICKNESS25 MM 373 NB 01.50 INCHES; THICKNESS50 MM 374 NB 02.00INCHES; THICKNESS50 MM 375 NB 06.00INCHES; THICKNESS50 MM 376 NB 08.00INCHES; THICKNESS50 MM 377 NB 012.000INCHES; THICKNESS60 MM 378 NB 018.000INCHES; THICKNESS60 MM 379 NB 24.00 INCHES; THICKNESS60 MM 380 NB 42.00 INCHES; THICKNESS60 MM 381 BLIND FLANGE ASSEMBLIES 382 NB 00.75 INCHES; THICKNESS25 MM 383 NB 08.00 INCHES; THICKNESS50 MM 384 VALVE ASSEMBLIES 385 NB 00.75 INCHES; THICKNESS25 MM 386 NB 01.00INCHES; THICKNESS25 MM 387 NB 01.50INCHES; THICKNESS50 MM 388 NB 02.00 INCHES; THICKNESS50 MM 389 NB 06.00INCHES; THICKNESS50 MM 390 NB 08.00 INCHES; THICKNESS50 MM 391 NB 012.000INCHES; THICKNESS60 MM 392 NB 018.000INCHES; THICKNESS60 MM 393 NB 24.00 INCHES; THICKNESS60 MM 394 NB 42.00 INCHES; THICKNESS60 MM 395 INSULATION TYPE : SC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 396 PIPES 397 NB 00.50 INCHES; THICKNESS25 MM 398 NB 00.75 INCHES; THICKNESS25 MM 399 NB 01.00 INCHES; THICKNESS25 MM 400 NB 01.50 INCHES; THICKNESS25 MM 401 NB 02.00 INCHES; THICKNESS25 MM 402 NB 03.00 INCHES; THICKNESS25 MM 403 NB 04.00 INCHES; THICKNESS40 MM 404 NB 06.00 INCHES; THICKNESS25 MM 405 NB 06.00 INCHES; THICKNESS40 MM 406 NB 08.00 INCHES; THICKNESS25 MM 407 NB 08.00 INCHES; THICKNESS40 MM 408 NB 12.00 INCHES; THICKNESS40 MM 409 NB 18.00 INCHES; THICKNESS40 MM 410 NB 24.00 INCHES; THICKNESS40 MM 411 NB 24.00 INCHES; THICKNESS50 MM 412 NB 28.00 INCHES; THICKNESS50 MM 413 NB 42.00 INCHES; THICKNESS50 MM 414 FLANGE ASSEMBLIES 415 NB 00.50INCHES; THICKNESS25 MM 416 NB 00.75INCHES; THICKNESS25 MM 417 NB 01.00INCHES; THICKNESS25 MM 418 NB 01.50 INCHES; THICKNESS25 MM 419 NB 02.00 INCHES; THICKNESS25 MM 420 NB 03.00INCHES; THICKNESS25 MM 421 NB 04.00INCHES; THICKNESS40 MM 422 NB 06.00 INCHES; THICKNESS25 MM 423 NB 06.00 INCHES; THICKNESS40 MM 424 NB 08.00INCHES; THICKNESS25 MM 425 NB 08.00INCHES; THICKNESS40 MM 426 NB 12.00 INCHES; THICKNESS40 MM 427 NB 018.000INCHES; THICKNESS40 MM 428 NB 24.00 INCHES; THICKNESS40 MM 429 NB 24.00 INCHES; THICKNESS50 MM 430 NB 42.00 INCHES; THICKNESS50 MM 431 BLIND FLANGE ASSEMBLIES 432 NB 00.75 INCHES; THICKNESS25 MM 433 NB 01.00 INCHES; THICKNESS25 MM 434 NB 01.50 INCHES; THICKNESS25 MM 435 NB 02.00 INCHES; THICKNESS25 MM 436 NB 08.00 INCHES; THICKNESS40 MM 437 NB 24.00 INCHES; THICKNESS50 MM 438 VALVE ASSEMBLIES 439 NB 00.50 INCHES; THICKNESS25 MM 440 NB 00.75 INCHES; THICKNESS25 MM 441 NB 01.00 INCHES; THICKNESS25 MM 442 NB 01.50 INCHES; THICKNESS25 MM 443 NB 02.00 INCHES; THICKNESS25 MM 444 NB 03.00 INCHES; THICKNESS25 MM 445 NB 04.00 INCHES; THICKNESS40 MM 446 NB 06.00INCHES; THICKNESS25 MM 447 NB 06.00INCHES; THICKNESS40 MM 448 NB 08.00 INCHES; THICKNESS25 MM 449 NB 08.00 INCHES; THICKNESS40 MM 450 NB 12.00 INCHES; THICKNESS40 MM 451 NB 018.000INCHES; THICKNESS40 MM 452 NB 24.00 INCHES; THICKNESS40 MM 453 NB 24.00 INCHES; THICKNESS50 MM 454 NB 42.00 INCHES; THICKNESS50 MM 455 ELECTRICAL WORKS 456 Design, detailed engineering, preparation of documents, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, preparation of graphics for the total microprocessor based analogue addressable type fire detection & alarm system including supply of required software, packing, delivery of the following, including supply of all commissioning spares & special tools and tackles, erection material & documentation as per the enclosed EIL standard specifications, scope of work/job specification, data sheets etc. and other codes and standards attached or referred. 457 8-loop microprocessor based DGFAP with HMI with battery &charger (refer block diagram) 458 Microprocessor based Repeater panel with battery and charger (refer block diagram) 459 Multi - sensor type addressable detectors with junction boxes for safe area 460 Intrinsically safeHeat Detector-addressable type 461 Addressable Linear Beam detectors with transmitter, receiver, reflector for safe area. 462 Zener barrier 463 Outdoor weather proof addressable Break Glass Unit (BGU)/Manual call point (IP-65)in safe area. 464 Indoor addressable Break Glass Unit (BGU) in safe area. 465 Addressable type electronic hooter with minimum 6W output 466 Wall mounting type one faced exit signs suitable for indoor location 467 Ceiling mounting type double faced exit signs suitable for indoor location 468 Weather proof (IP-65) Fault Isolating Modules for loops connecting outdoor break glass units 469 Fault Isolating Modules for loops connecting indoor break glass units/detectors/hooters etc. 470 Control modules with integral junction box installed within loop 471 Input Module with integral junction box installed within loop 472 Industrial type 5 km diametrical range siren with Siren control & starter panel 473 Response indicator for rooms and concealed area for Addressable Fire alarm system 474 Hooter acknowledge Box 475 Providing training for TWO Nos. OWNERs Engineers for a period of 4 days at manufacturer works for Fire Alarm system 476 Providing training for FIVE Nos. OWNERs Engineers at site for the complete fire alarm system 477 Mandatory spares for Fire Alarm system as perCl.6.1 (Mandatory spares), sr.no.15 of EDB document no. B861-000-16-50-EDB-1001 478 Supply, inspection at shop, delivery at site of safe area weatherproof/ indoor push button type desktop/ wallmounting type Analogue caller ID telephone handsets (corded landline phones) with numeric key pad and redialling facility complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-ChargeExisting exchange distribution boxes make is ADC Krone, UK 479 Supply, inspection at shop, delivery at site of safe area weatherproof/ indoor push button type desktop/ wall mounting type Analogue non caller ID telephone handsets complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.Existing exchange distribution boxes make is ADC Krone, UK 480 Installation, testing and commissioning of safe area weatherproof/ indoor push button type desktop/ wall mounting type telephone handsets complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 481 Design, detailed engineering, manufacture, preparation of documents, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, supply & delivery of plant communication system supply of all commissioning spares and special tools & tackles, erection & installation material & documentation as per the enclosed EIL specifications, Job specifications/scope of work, datasheets etc and other codes & standards attached or referred. 482 Desktop type Master Call Station (Central Control Unit withMain Master Control Controller with Gooseneck MIC and All Call & Inter-MCD Call facility) with 24 keys suitable for connection with existing 16 Way Microprocessor based Central Control Exchange of DD Electronic Equipment’s PVT Ltd make.Make & model no. of Desktop type Master call station shall be same/ similar make as that of existing.Existing make is DD Electronic Equipment’s PVT Ltd with Model No: LDD8950/20 483 480W BOOSTER AMPLIFIER UNIT including all accessories such as zonal relay cards, IOs, interconnection cables etc. suitable for integration with existing exchange of make DD equipments. Make & Model no. of Booster amplifier unit shall be same/similar make as that of existing.Existing make is BOSCH with Model No: LBD 1938 484 Weather proof IP-65 loud speaker 15/20 Watt suitable for integration with existing exchange of make DD equipments. Make & Model no. of Booster amplifier unit shall be same/similar make as that of existing. Existing make & model no. is Make – DNH ; Model - HS15T 485 Supply, installation and connection of CU earth plates ( 380x45x10) size, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge. 486 Unit Rates for UPS ACDB feeders/components 487 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU upto 32 A with Isolation Transformer 488 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 63 A with Isolation Transformer 489 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 100 A with Isolation Transformer 490 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU upto 32 A without Isolation Transformer 491 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 63 A without Isolation Transformer 492 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 100 A without Isolation Transformer 493 supply& connection of 300A, 230V ACDB Vertical Empty Panel along with bus bar 494 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 16 A with 230/240V step up transformer) 495 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 32 A with 230/240V step up transformer) 496 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 63 A with 230/240V step up transformer) 497 Supply, mounting & wiring of 100A switch 498 Supply, mounting & wiring of 63A switch 499 Supply, mounting & wiring of 32A switch 500 Supply, mounting & wiring of 100A semiconducting fuse 501 Supply, mounting & wiring of 63A semiconducting fuse 502 Supply, mounting & wiring of 32A semiconducting fuse 503 Supply, mounting & wiring of 100A HRC fuse 504 Supply, mounting & wiring of 63A HRC fuse 505 Supply, mounting & wiring of 32A HRC fuse 506 Supply, mounting & wiring of 6 kVA 230V/230V Isolating Transformer 507 Supply, mounting & wiring of 5 kVA 230V/230V Isolating Transformer 508 Supply, mounting & wiring of 4 kVA 230V/230V Isolating Transformer 509 Supply, mounting & wiring of 3 kVA 230V/230V Isolating Transformer 510 Supply, mounting & wiring of 2 kVA 230V/230V Isolating Transformer 511 Supply, mounting & wiring of 1 kVA 230V/230V Isolating Transformer 512 Unit rates for 110V DCDB feeders/components 513 supply& connection of 350A, 110V DCDB Vertical Empty Panel along with bus bar 514 Supply, mounting & wiring of 63A, 110V DC SFU fully equipped outgoing feeder 515 Supply, mounting & wiring of 32A, 110V DC SFU fully equipped outgoing feeder 516 Supply, mounting & wiring of 16A, 110V DC SFU fully equipped outgoing feeder 517 Supply, mounting & wiring of 32A, 110V DC SFC (switch fuse+ contactor) fully equipped outgoing feeder 518 Supply, mounting & wiring of 16A, 110V DC SFC (switch fuse+ contactor) fully equipped outgoing feeder 519 Supply, mounting & wiring of 100A, 110V DC Switch 520 Supply, mounting & wiring of 63A, 110V DC Switch 521 Supply, mounting & wiring of 32A, 110V DC Switch 522 Supply, mounting & wiring of 16A, 110V DC Switch 523 Supply, mounting & wiring of 100A, 110V DC fuse Link 524 Supply, mounting & wiring of 63A, 110V DC fuse Link 525 Supply, mounting & wiring of 32A, 110V DC fuse Link 526 Supply, mounting & wiring of 16A, 110V DC fuse Link 527 Supply, mounting & wiring of 100A, 110V DC contactor 528 Supply, mounting & wiring of 63A, 110V DC contactor 529 Supply, mounting & wiring of 32A, 110V DC contactor 530 Supply, mounting & wiring of 16A, 110V DC contactor 531 TRANSFORMERS 532 Installation of transformers of the following ratings excluding the construction of foundation, includingtransportation from store/yard to site at the place of installation, unpacking, positioning in place, site assembly of loosely furnished accessories, including connection of auxiliary circuits, topping up with oil and testing of oil with contractors own test equipment, including fixing of nuts and bolts etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 533 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV2.5 MV·A 534 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV1.6 MV·A 535 2 Winding ONAN/ONAF outdoor transformer with OLTC. 11 kV/ 6.9 kV6.3 MV·A 536 Filtration of transformer oil by stream line filter machine provided by the contractor for improving the insulation strength of oil to the required strength,including all labour and materials,specifications of this tender and directions of Engineer-in-Charge.(Excluding the supply of oil). 537 Filtration of transformer oil with dissolved gas analysis test. 538 Filtration of transformer oil without dissolved gas analysis test. 539 Supply of transformer oil conforming to IS-335 in non-returnable 220 litre drums for topping up various transformers. The oil shall be tested prior to filling up and improved by filtering, if required, including all labour and materials,specifications of this tender and directions of Engineer-in-Charge. 540 No. of Drums. 541 Supply of dry type transformers with accessories,including nuts and bolts etc., as per EIL standard specification No. 6-51-0042, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 542 2 Winding Dry type transformers. .415 kV/ .415 kV75 kV·A 543 2 Winding Dry type transformers. .415 kV/ .415 kV160 kV·A 544 Installation, testing and commissioning of dry transformer of following rating, including transportation from store/yard to site at the place of installation, unpacking, positioning in place, site assembly of loosely furnished accessories, connection of auxiliary circuits,including fixing of nuts and bolts etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 545 2 Winding Dry type transformers. .415 kV/ .415 kV75 kV·A 546 2 Winding Dry type transformers. .415 kV/ .415 kV160 kV·A 547 Testing and commissioning of transformers of the following rating including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. 548 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV2.5 MV·A 549 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV1.6 MV·A 550 2 Winding ONAN/ONAF outdoor transformer with OLTC. 11 kV/ 6.9 kV6.3 MV·A 551 SWITCHBOARDS / UPS / VSD / BATTERY CHARGERS / PANELS 552 Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 553 Weight of the Unit upto 100 kg. 554 Weight of the Unit from 101 upto 500 kg. 555 Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor etc., interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineers-in-Charge. 556 Weight of the Unit upto 100 kg. 557 Weight of the Unit from 101 upto 500 kg. 558 Installation, testing and commissioning of bus ducts of following ratings between transformer secondary and the switchgear incomer panel, including transportation from store/yard to site at the place of installation, unpacking, making connections and installation of bends, breaking of walls and making good of the same etc., (but excluding structural supports), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 559 Air Insulated/segregated bus ducts 415 V4000 A65 kAfor 1 second 560 Air Insulated/segregated bus ducts 415 V2500 A65 kAfor 1 second 561 Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 562 Weight of the Unit upto 100 kg 563 Weight of the Unit from 101 upto 500 kg. 564 Weight of the Unit from 501 upto 1000 kg. 565 Weight of the Unit from 1001 upto 1500 kg. 566 Weight of the Unit from 1501 upto 3000 kg. 567 Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 568 Weight of the Unit upto 100 kg 569 Weight of the Unit from 101 upto 500 kg. 570 Weight of the Unit from 501 upto 1000 kg. 571 Weight of the Unit from 1001 upto 1500 kg. 572 Weight of the Unit from 1501 upto 3000 kg. 573 Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery to site including all labour and materials along with supply of special tools & tackles for following Single Phase, 50 Hz UPS System along with associated accessories and AC Distribution Board complete with documentations as per approved drawings, specifications, data sheets and other codes & standards attached or referred with this tender and directions of Engineer-in-charge. 574 55KVA, 230V, 50 Hz, SPNParallel Redundant UPS withBypass as data sheet DS-440 575 1X100% NI-CD Battery Bank for 30 Min. backup along with all accessories & battery Isolator. 576 230V, 300 Amps, 50 Hz, AC Distribution Board as per Feeder Details listed in scope of work/job specification 577 Cell booster of adequate rating suitable for battery AH capacity. 578 Providing training to 2 nos. owners engineer at Vendor Works for a period of min. 3 days for 55KVA UPS system 579 Providing training to 5 nos. owners engineers at site for 55KVA UPS system 580 Mandatory spares for 230V, 55KVA UPS system as perCl.6.1 (Mandatory spares), sr.no.10 of EDB document no. B861-000-16-50-EDB-1001 581 MISCELLANEOUS CONTROL GEAR 582 Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations),including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 583 Weight of the unit above 5 kg. but upto 20 kg. 584 Weight of the unit above 20 kg. but upto 100 kg. 585 Weight of the unit up to 5 kg. 586 Supply of Industrial, weather proof type Push Button stations as per EIL specification No. 6-51-0014, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 587 With stop (latching type) push button. 588 With stop (non-latching type) push button. 589 With start and stop (latching type) push buttons. 590 With start, stop push buttons and ammeter. 591 With start,stop push buttons and one Three position selector switch. 592 With start,stop push buttons, one Three position selector switch and ammeter. 593 With stop push button (Break Glass Type). 594 With start and stop (non-latching type) push buttons. 595 Supply of flameproof and weather proof type Push Button station as per EIL standard specification No. 6-51-0006 as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 596 With start, stop push buttons and one Three position selector switch and ammeter. 597 DC SYSTEM / BATTERY BANK 598 Supply of following ratings of Nickel-cadmium batteries, battery charger, distribution board alongwith accessories as per EIL specification No. 6-51-0019, 6-51-0047, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 599 160A (Min.) , dual redundant battery charger as per data sheet DS-430 600 110V, 1x500AH(Min.), Ni-Cd battery bank 601 110V, 350A DC distribution board as per feeder details listed in scope of work/job specification 602 3P MCCB / DC Circuit Breaker Battery isolator in weatherproof enclosure(IP-55)of adequate rating. 603 Mandatory spares for 110V Battery & Battery charger as per Cl.6.1 (Mandatory spares), sr.no.11 of EDB document no. B861-000-16-50-EDB-1001 604 Installation, testing and commissioning of stationary nickel-cadmium battery banks of the following ratings, including transportation from store/yard to site at the place of installation, filling with electrolyte, charging and dischargng of cells, including capacity test etc., aligning, levelling, grouting, assembly of battery racks, fixing of inter-cell connectors etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 605 Nickel-cadmium battery banks (including capacity test) rated for 110 V500 Ah 606 Supply of following rating of cell boosters as per EIL specification No. 6-51-0019, including all labour and materials, as per data sheets, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 607 Cell booster rated for 12 V50 A 608 PLUGS, SOCKETS AND JUNCTION BOXES 609 Supply of weatherproof metal clad 415V, TPN, industrial type socket and plug with heavy duty interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, including supply of double compression brass nickel plated cable glands, tinned copper lugs,including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 610 63 A, 415 V, 5 pin sockets along with associated 5 pin plugs. 611 240 V, 15 A, 3 pin sockets. 612 240 V, 15 A, 3 pin sockets along with associated 3 pin plugs. 613 24 V, 5 A, 3 pin sockets along with associated 3 pin plugs. WITH TRANSFORMER.(240/24V) 614 Supply, installation, cable termination, connection, testing and commissioning of following types of FLP andWP junction boxes, as per EIL specification No. 6-51-0061, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 615 WP JB (IP-65) with 15 A, 16 terminals suitable for 1 No. incoming and6 Nos. outgoing cable entries complete with cable glands for incoming and outgoing cables and 3 Nos. blocking plugs 616 WP 3 way JB (IP-65) complete with 3 Nos. cable glands and 1 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable. 617 WP 4 way JB with IP-65 degree of protection complete with 4 Nos. cable glands and 2 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable. 618 NEUTRAL GROUNDING RESISTOR 619 Supply of following rating of outdoor type neutral grounding resistor, as per EIL standard specification no.6-51-0043,including all labour and materials, as per approved drawings, specifications of this tnder and directions of Engineer-in-Charge. 620 NGR rated for 3.81 kV400 A 621 Installation, testing and commissioning of outdoor type following neutral grounding resistor consisting of cast iron/stainless steel grid resistor with/without neutral CT including connection of one end of resistor with transformer neutral and the other end of the resistor to the earthing grid, including transportation from store/yard to site at the place of installation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 622 NGR rated for 3.81 kV400 A 623 CAPACITOR BANKS 624 Supply of following HV capacitor banks, series reactor and RVT, as per EIL standard specification NO. 6-51-0020, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 625 11kV, 3 Phase,indoor type APFC panel -1500kVAR 626 Mandatory spares for APFC as per Cl.6.1 (Mandatory spares), sr.no.20 of EDB document no. B861-000-16-50-EDB-1001 627 Installation of following H.V. capacitor banks,series reactor and RVT, including transportation from store/yard to site ofinstallation, unpacking, assembly of elevating structure, interconnection of loose parts supplied by equipment vendor, aligning, levelling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 628 HV capacitor banks rated for 1500 kVAR11 kV 629 Testing and commissioning of following H.V. capacitor banks,series reactor and RVT, including testing equipments, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 630 HV capacitor banks rated for 1500 kVAR11 kV 631 CANOPIES 632 Supply, fabrication and installation of FRP canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 633 Lighting Panel/Power panel/distribution junctions boxes. 634 Manual call points/field call stations. 635 Push button stations. 636 Supply, fabrication andinstallation of canopies for miscellaneous outdoor equipment like motors, fire alarm points, telephones, communication hand set stations etc. to render them weatherproof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 637 Supply, fabrication andinstallation of GI canopies for outdoor electrical motors of following frame sizes to render them weather proof including supply of necessary hardware for fixing and clamping with the motor foundation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 638 Frame size upto 80. 639 Frame size more than 80 and upto 112. 640 Frame size more than 112 and upto 180. 641 Frame size more than 180 and upto 250. 642 Supply, fabrication and installation of GI canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 643 Lighting Panel/Power panel/distribution junctions boxes. 644 Manual call points/field call stations. 645 Push button stations. 646 FLP receptacles. 647 ANCHOR FASTENERS 648 Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 649 3/16 BSW. 650 5/16 BSW. 651 1/4 BSW. 652 3/8 BSW. 653 5/8 BSW. 654 1/2 BSW. 655 SAFETY EQUIPMENT 656 Supply and installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required, mounting, including all labour and materials, complete and as per applicable standards and CEA Guidelines and as per directions of Engineer-in-Charge. 657 Shock hazard charts complete with frame and glass. 658 First Aid Boxes. 659 4.5 kg capacity CO2 type fire extinguishers. 660 6.8 kg capacity CO2 type fire extinguishers. 661 9 kg capacity CO2 type fire extinguishers. 662 Sand buckets with stand (Each with at least 3 sand buckets). 663 Shock hazard charts - Laminated type 664 Gas Mask for use in substation during fire & smoke as per CEA guidelines 665 Supply and laying of 900 mm wide safety insulation mats complying to IS-15652, of following grades required for maintenance of electrical equipment in substation, including cutting to required shape in running length, including all labour and materials, as per applicable Indian or International standards and CEA Guidelines and as per directions of Engineer-in-Charge. 666 3.3 kV grade. 667 11 kV grade. 668 Supply of following items as per applicable Indian standards/CEA Guidelines. 669 Rubber hand gloves (11 kV grade). 670 Rubber hand gloves (33 kV grade). 671 Enamelled caution boards. 672 Discharge rod with earthing facility (upto 11 kV grade). 673 HV fuse puller handle. 674 Supply and application/installation of epoxy based insulation coating with breakdown voltage as per IS, suitable for system voltage as marked and shall be suitable for installation on concrete flooring of substation in airconditioned/non-airconditioned area, having smooth finish, including all labour and materials, complete as per approved drawings, job & standard specification attached with this tender and directions of the engineer-in- charge 675 For highest systen voltage of 12.1kV 676 SUPPLY OF SPARES / LAMPS 677 MV HRC Fuses 678 16 A. 679 32 A. 680 63 A. 681 100 A. 682 160 A. 683 250 A. 684 SUPPLY OF MV CABLES 685 Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 686 2 C x 10 sq. mm 687 2C x 16 sq. mm 688 2 C x 2.5 sq. mm 689 3 C x 6 sq. mm 690 2 C x 4 sq. mm 691 3 C x 4 sq. mm 692 3 C x 10 sq. mm 693 3 C x 2.5 sq. mm 694 Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 695 3 C x 25 sq. mm 696 3.5 C x 25 sq. mm 697 3 C x 35 sq. mm 698 2 C x 50 sq. mm 699 3 C x 95 sq. mm 700 3 C x 120 sq. mm 701 3.5 C x 185 sq. mm 702 3 C x 240 sq. mm 703 3 C x 50 sq. mm 704 3.5 C x 35 sq. mm 705 3.5 C x 95 sq. mm 706 3.5 C x 300 sq. mm 707 3.5 C x 50 sq. mm 708 3.5 C x 120 sq. mm 709 Supply of 1100 V grade, Copper Conductor, Individual pair shielded & Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge. 710 1 Pair x 2.5 sq. mm 711 2 Pair x 2.5 sq. mm 712 4 Pair x 2.5 sq. mm 713 6 Pair x 2.5 sq. mm 714 12 Pair x 2.5 sq. mm 715 SUPPLY OF HV CABLES (MULTI CORE) 716 Supply of 6.6 kV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 717 3 C x 240sq. mm, Al 718 Supply of 11 kV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured cables of following sizes as per EIL standardspecification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 719 3 C x 240 sq. mm, Al 720 3 C x 300 sq. mm, Al 721 SUPPLY OF HV CABLES (SINGLE CORE) 722 Supply of 6.6 KV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured single core cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 723 1 C x 630 sq. mm, Al 724 Supply of 11 KV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured single core cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 725 1 C x 630 sq. mm, Al 726 LAYING OF CABLES 727 Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 728 Cables with OD above 80 mm but upto 100 mm. 729 Cables with OD above 50 mm but upto 60 mm. 730 Cables with OD above 60 mm but upto 80 mm. 731 Cables with OD above 30 mm but upto 40 mm. 732 Cables with OD above 20 mm but upto 30 mm. 733 Cables with OD upto 20 mm. 734 Cables with OD above 40 mm but upto 50 mm. 735 Laying of cables (using cable pulling by motorized winch with torque limits) of different voltage grade and types of the following overall diameters in ready trays/trenches/supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 736 Cables with OD upto 20 mm. 737 Cables with OD above 20 mm but upto 30 mm. 738 Cables with OD above 30 mm but upto 40 mm. 739 Cables with OD above 40 mm but upto 50 mm. 740 Cables with OD above 50 mm but upto 60 mm. 741 Cables with OD above 60 mm but upto 80 mm. 742 Cables with OD above 80 mm but upto 100 mm. 743 END TERMINATIONS 744 Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per IEC-60331, specifications of this tender and directions of Engineer-in- Charge. (Actual area of surface painted shall be measured). 745 Supply of Unearthed grade H.V. termination kits of (indoor/outdoor type) as per EIL standard specification No. 6-51-0051, excluding cable glands and lugs, as per approved drawings and as per specifications of this tender and directions of Engineer-in-Charge. 746 3 Core cable Indoor termination kit for 6.6 kV240 mm² 747 3 Core cable Outdoor termination kit for 6.6 kV240 mm² 748 3 Core cable Indoor termination kit for 6.6 kV300 mm² 749 3 Core cable Indoor termination kit for 11 kV300 mm² 750 3 Core cable Indoor termination kit for 11 kV240 mm² 751 1 Core cable Indoor termination kit for 6.6 kV630 mm² 752 1 Core cable Indoor termination kit for 11 kV630 mm² 753 Termination of Unearthed grade HV cables and connection of leads including fixing of cable glands,supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug onto the conductor, restoration of the insulation, clamping of cable cores and earthing of armour, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excluding supply of termination kits and cable glands). 754 3 Core cable termination kit for 6.6 kV300 mm² 755 3 Core cable termination kit for 6.6 kV240 mm² 756 3 Core cable termination kit for 11 kV300 mm² 757 3 Core cable termination kit for 11 kV240 mm² 758 1 Core cable termination kit for 6.6 kV630 mm² 759 1 Core cable termination kit for 11 kV630 mm² 760 Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but includingfixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 761 Cables with OD above 60 mm but upto 80 mm. 762 Cables with OD above 40 mm but upto 50 mm. 763 Cables with OD above 30 mm but upto 40 mm. 764 Cables with OD above 50 mm but upto 60 mm. 765 Cables with OD upto 20 mm. 766 Cables with OD above 20 mm but upto 30 mm. 767 Termination of communication, fire alarm & control paired cables and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations,cutting, stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable- cores, marking with wire number, ferrules etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 768 All sizes from 1P to 4P and upto 2.5 sq. mm 769 All sizes from 5P to 10P and upto 2.5 sq. mm 770 All sizes from 11P to 15P and upto 2.5 sq. mm 771 STRAIGHT THROUGH JOINTS 772 Supply and Making of heat shrinkable type straight through joints for 1100 volt grade power cablesas per EIL standard specification No. 6-51-0051, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 773 Cables with OD above 30 mm but upto 40 mm. 774 Cables with OD above 50 mm but upto 60 mm. 775 Cables with OD above 60 mm but upto 80 mm. 776 Cables with OD upto 20 mm. 777 Cables with OD above 40 mm but upto 50 mm. 778 Cables with OD above 20 mm but upto 30 mm. 779 Supply of heat shrinkable type Straight through jointing kits for Unearthed grade H.V. cables of the following sizes,as per EIL standard specification No. 6-51-0051, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 780 3 Core cable Straight through jointing kits for 6.6 kV240 mm² 781 3 Core cable Straight through jointing kits for 11 kV300 mm² 782 1 Core cable Straight through jointing kits for 6.6 kV630 mm² 783 1 Core cable Straight through jointing kits for 11 kV630 mm² 784 Making of Straight through joints for H.V. cables of following sizes excluding supply of jointing kit and accessories, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 785 3 Core cable Straight through jointing kits for 6.6 kV240 mm² 786 3 Core cable Straight through jointing kits for 11 kV300 mm² 787 1 Core cable Straight through jointing kits for 6.6 kV630 mm² 788 1 Core cable Straight through jointing kits for 11 kV630 mm² 789 Supply and Making of heat shrinkable type straight through joints for communication, fire alarm & control paired cables, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 790 All sizes from 5P to 10P and upto 2.5 sq. mm 791 All sizes from 11P to 15P and upto 2.5 sq. mm 792 All sizes from 1P to 4P and upto 2.5 sq. mm 793 G.I. & PVC PIPES 794 Supply and laying of following sizes ofG.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 795 100 mm NB. 796 150 mm NB. 797 50 mm NB. 798 STRUCTURAL STEEL 799 Supply, fabrication, galvanising andinstallation of base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including welding, bolting, rivetting, supply of necessary anchor bolts and grouting etc., including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Any item weighing up to 1 kg. or less shall neither be measured nor paid). 800 CABLE - TRAYS 801 Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 802 Reducers 750 - 450 RHS. 803 Reducers 750 - 600 RHS. 804 Reducers 750 - 600 LHS. 805 Horizontal bends for 450 mm wide tray with 1000 mm bending radius. 806 Horizontal bends for 600 mm wide tray with 1000 mm bending radius. 807 Vertical outside bends for 450 mm wide tray with 1000 mm bending radius. 808 Vertical outside bends for 600 mm wide tray with 1000 mm bending radius. 809 Vertical inside bends for 600 mm wide tray with 1000 mm bending radius. 810 Tee Joints for 450 mm wide tray with 1000 mm bending radius. 811 Tee Joints for 600 mm wide tray with 1000 mm bending radius. 812 Tee Joints for 750 mm wide tray with 1000 mm bending radius. 813 Cross Joints for 450 mm wide tray with 1000 mm bending radius. 814 Cross Joints for 750 mm wide tray with 1000 mm bending radius. 815 Vertical inside bends for 750 mm wide tray with 1000 mm bending radius. 816 300 mm wide Straight run cable tray. 817 Horizontal bends for 750 mm wide tray with 1000 mm bending radius. 818 Vertical outside bends for 750 mm wide tray with 1000 mm bending radius. 819 600 mm wide Straight run cable tray. 820 Reducers 750 - 300 RHS. 821 Reducers 600 - 300 RHS. 822 Horizontal bends for 300 mm wide tray with 1000 mm bending radius. 823 Vertical outside bends for 300 mm wide tray with 1000 mm bending radius 824 Vertical inside bends for 300 mm wide tray with 1000 mm bending radius 825 Tee Joints for 300 mm wide tray with 1000 mm bending radius. 826 450 mm wide Straight run cable tray. 827 750 mm wide Straight run cable tray. 828 Supply and installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 829 150 mm wide. 830 60 mm wide. 831 100 mm wide. 832 Supply, fabrication andinstallation of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 833 CABLE GLANDS 834 Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 835 Cables with OD above 50 mm but upto 60 mm. 836 Cables with OD above 30 mm but upto 40 mm. 837 Cables with OD above 40 mm but upto 50 mm. 838 Cables with OD above 60 mm but upto 80 mm. 839 Cables with OD above 20 mm but upto 30 mm. 840 Cables with OD upto 20 mm. 841 Supply of nickel plated brass double compression cable glands suitable for outdoor installations (WP) of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 842 Cables with OD upto 20 mm. 843 Cables with OD above 20 mm but upto 30 mm. 844 Cables with OD above 30 mm but upto 40 mm. 845 Cables with OD above 40 mm but upto 50 mm. 846 Cables with OD above 50 mm but upto 60 mm. 847 Cables with OD above 60 mm but upto 80 mm. 848 Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 849 Cables with OD upto 20 mm. 850 Cables with OD above 20 mm but upto 30 mm. 851 Cables with OD above 30 mm but upto 40 mm. 852 Cables with OD above 40 mm but upto 50 mm. 853 Cables with OD above 50 mm but upto 60 mm. 854 Cables with OD above 60 mm but upto 80 mm. 855 Cables with OD above 80 mm but upto 100 mm. 856 Supply and fixing of FLP(IIA/IIB) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 857 Cables with OD above 60 mm but upto 80 mm 858 Cables with OD above 30 mm but upto 40 mm 859 Cables with OD above 40 mm but upto 50 mm 860 Cables with OD above 50 mm but upto 60 mm 861 Cables with OD up to 20 mm 862 Cables with OD above 20 mm but upto 30 mm 863 MARKERS 864 Supply and installation of earth pit markers for directly buried GI pipe electrodes as per std. 7-51-0101 with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation, including all labour and materials, as per approved drawings, specifications of this tender and direction of Engineer-in-Charge. 865 Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 866 CABLE LUGS 867 Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 868 All sizes from 50 to 185 sq. mm 869 All sizes from 16 to 35 sq. mm 870 All sizes from 240 to 400 sq. mm 871 All sizes upto 10 sq. mm 872 All sizes from 500 to 1000 sq. mm 873 Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 874 All sizes upto 10 sq. mm 875 All sizes from 240 to 400 sq. mm 876 All sizes from 16 to 35 sq. mm 877 All sizes from 50 to 185 sq. mm 878 All sizes from 500 to 1000 sq. mm 879 Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 880 All sizes from 50 to 185 sq. mm 881 All sizes from 240 to 400 sq. mm 882 All sizes upto 10 sq. mm 883 All sizes from 16 to 35 sq. mm 884 All sizes from 500 to 1000 sq. mm 885 Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 886 All sizes upto 10 sq. mm 887 All sizes from 16 to 35 sq. mm 888 All sizes from 240 to 400 sq. mm 889 All sizes from 50 to 185 sq. mm 890 All sizes from 500 to 1000 sq. mm 891 FIRE PROOFING OF CABLES 892 Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. (Actual area of surface painted shall be measured). 893 ADAPTORS / REDUCERS / NIPPLES ETC. 894 Supply and fixing nickel-plated brass adaptors/ reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 895 Eqpt. Thread 3/4 PF (J.I.S.)-E.T. Thread 3/4ET 896 Eqpt. Thread 1 PF (J.I.S.) - E.T. Thread 3/4ET 897 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 1ET 898 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/4ET 899 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/2ET 900 Eqpt. Thread 2 PF (J.I.S.) -E.T. Thread 1-1/2ET 901 Supply and installation of GI reducers/enlargers of following sizes for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 902 Eqpt. Thread PG 13.5(DIN) - E.T. Thread 3/4 ET 903 Eqpt. Thread PG 16 (DIN) -E.T. Thread 3/4 ET 904 Eqpt. Thread PG 21 (DIN) -E.T. Thread 1ET 905 Eqpt. Thread PG 29 (DIN) -E.T. Thread 1-1/2 ET 906 Eqpt. Thread 1 ET (IS) -E.T. Thread 3/4 ET 907 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1 ET 908 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1-1/2 ET 909 Eqpt. Thread 2 ET (IS) -E.T. Thread 1-1/2 ET 910 Supply and fixing FLP(IIA/IIB), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 911 Eqpt. Thread 3/4 PF (J.I.S.)-E.T. Thread 3/4ET 912 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 3/4ET 913 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 1ET 914 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/4ET 915 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/2ET 916 Eqpt. Thread 2 PF (J.I.S.) -E.T. Thread 1-1/2ET 917 Supply and installation of FLP(IIA/IIB) GI reducers/ enlargers of following sizes for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 918 Eqpt. Thread PG 13.5(DIN) - E.T. Thread 3/4 ET 919 Eqpt. Thread PG 16 (DIN) -E.T. Thread 3/4 ET 920 Eqpt. Thread PG 21 (DIN) -E.T. Thread 1ET 921 Eqpt. Thread PG 29 (DIN) -E.T. Thread 1-1/2 ET 922 Eqpt. Thread 1 ET (IS) -E.T. Thread 3/4 ET 923 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1 ET 924 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1-1/2 ET 925 LIGHTING POLES 926 Supply and installation of Lighting Poles for floor mounting as per std. 7-51-0201, including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 927 Lighting poles including supply and connection of wires upto fixtures for safe areas. 928 Supply andinstallation of platform Lighting pole as per std. 7-51-0202,including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 929 Lighting poles including supply and connection of wires upto fixtures for safe areas. 930 Supply andinstallation of street lighting poles (single bracket/double bracket) including built in marshalling box andnecessary wire/cable running from marshalling box to the lighting fixture, cable termination and connection, fixing of cable glands and lugs,including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 931 Poles as per std. 7-51-0233 with MB as per 7-51-0208 for safe area 932 Poles as per std. 7-51-0234 sht. 2 of 2 (Single bracket) 933 HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES 934 Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 935 3-way, junction box. 936 4-way, junction box. 937 Well glass type pole mounting type for Ground Level. 938 Well glass type ceiling mounted. 939 Well glass type bracket mounted. 940 Well glass type pole mounting type for Platform. 941 Supply and installation of Type-`A clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 942 Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as per EIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer-in-Charge. 943 Supply and installation of Type-`B clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 944 SAFE AREA LIGHTING FIXTURES 945 Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of Engineer-in-Charge. 946 Type LED SFD-12 Fixtures. 947 Type LED BK-3 Fixtures. 948 Type LED ST-10 Fixtures. 949 Type LED FD-1 Fixtures. 950 Type LED FD-2 Fixtures. 951 Type LED FD-3 Fixtures. 952 JUNCTION BOXES (OUTDOOR / INDOOR TYPE) 953 Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 954 3 way. 955 4 way. 956 LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS 957 Supply, installation, connection, testing and commissioning offlame proof weather proof lighting/power panels(for gas group IIA/IIB) as per EIL std. spec. 6-51-0008, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 958 40 A, 4 pole incomer MCB isolator and 12 Nos. outgoingdouble poleMCBs with ELCB (upto 20 A). 959 40 A, 4 pole incomer MCB isolator and 6 Nos. outgoingdouble poleMCBs with ELCB (upto 20 A). 960 Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with completewiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 961 40 A, 4 pole incomer MCB isolator and 6 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 962 40 A, 4 pole incomer MCB isolator and 12 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 963 63 A, 4 pole incomer MCB isolator and 18 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 964 WIRING 965 Circuit wiring in non-hazardous areas using (size given below), copper conductor, PVC insulated, FRLS outer sleeve cables (third core for earthing),from lighting/powerpanel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 966 3 C x 2.5 sq. mm 967 3 C x 4 sq. mm 968 Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 969 3 C x 2.5 sq. mm 970 EARTH ELECTRODES 971 Supply, installation, testing and commissioning of GI earth electrodes, complete with earth pit as per std. 7-51-0102 and all necessary materials including excavation of earth pit, filling with charcoal and salt, back filling, providing necessary brickwork, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 972 GI earth electrode as per std. 7-51-0102. 973 COPPER EARTH ELECTRODES 974 Supply, installation, testing and commissioning of Cu earth electrodes complete with 38 mm outer dia x 3 mm thick Cu pipe in a depth of 25Mtr, 3mm Thick 4Inch X 12 Inch Copper plate, earth pit and all necessary materials including excavation of earth pit, filling with charcoal and salt, bentonite powder, back filling, providing necessary brickwork, connections, including all labour and materials, as per sketch B861-000-16-50-DS-4001, approved drawings, specifications of this tender and directions of Engineer-in-Charge 975 EARTH STRIPS 976 Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 977 100 X 12 mm 978 40 x 5 mm 979 25 x 3 mm 980 50 x 6 mm 981 Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 982 100 X 12 mm 983 40 x 5 mm 984 25 x 3 mm 985 50 x 6 mm 986 EARTHING CONNECTION 987 Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 988 3/8 dia (10 mm) flexible rope. 989 5/8 dia (16 mm) flexible rope. 990 8 SWG GI Wire. 991 Supply and installation of 25 sq. mm (168/0.01772) copper flexibles of following length with copper lugs crimped on both sides for earthing of pipeline vessels, equipments (non electrical) as per std. 7- 51-0112, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 992 300 mm 993 500 mm 994 1500 mm 995 EARTH PLATES 996 Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 997 GI earth plate as per std. 7-51-0103. 998 EARTHING CONNECTORS 999 Supply and installation of MS ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1000 Minimum 75mm to maximum 300 mm long 1001 Supply and installation of stainless steel ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1002 Minimum 75mm to maximum 300 mm long 1003 LIGHTNING RODS 1004 Supply and installation of GI lightning rod as per std. 7-51-0503 including supply of all hardware etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1005 GI lightning rod as per std. 7-51-0503. 1006 LAYING OF COMMUNICATION / FIRE ALARM CABLES 1007 Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1008 Cables of overall dia. above 35 mm. 1009 Cables of overall dia. upto 35 mm. 1010 Laying of HDPE ducts for laying of optical fiber cables between various substations, pulling through pipes or supported on structures including supplying and fixing of GI saddle and saddle bars, including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1011 HDPE duct with overall dia. Upto 60mm 1012 HDPE duct with overall dia. above 60mm 1013 Laying of optical fiber cables between various buildings in already laid HDPE conduits for plant communication and fire alarm data highway, feeder differential protection, etc., including supply of all hardware, splice connectors, accessories, pulling through pipes or supported on structures including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1014 Cables of overall dia. upto 40 mm. 1015 Cables of overall dia. above 40 mm. 1016 STRAIGHT THROUGH JOINTS COMMUNICATION / FIRE ALARM CABLES 1017 Making of straight through joints for polyethylene insulated armoured jelly filled/ non filled overall PVC jacketed, including supply of all necessary materials for the joint, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1018 For Non-Jelly filled cables of size .9 mm5 pair 1019 For Non-Jelly filled cables of size .9 mm20 pair 1020 For Non-Jelly filled cables of size .9 mm10 pair 1021 For Jelly filled cables of size .63 mm²20 pair 1022 For Non-Jelly filled cables of size 1.5 mm²2 pair 1023 Supply of straight through jointing kit for Mono mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1024 6 Fiber 1025 Supply of straight through jointing kit for Multi mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1026 6 Fiber 1027 Making of straight through jointing kit for Mono/Multi mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1028 6 Fiber 1029 END TERMINATIONS FOR COMMUNICATION/FIRE ALARM CABLES. 1030 Termination of following polyethylene insulated armoured jelly filled/ non filled cables including cutting, stripping of cable insulation, sealing of jacket including supply of termination kit, hardware, including all labour and materials, as per approved drawings, specification of this tender and directions of Engineer-in-Charge. 1031 For Non-Jelly filled cables of size .9 mm5 pair 1032 For Non-Jelly filled cables of size .9 mm2 pair 1033 For Non-Jelly filled cables of size .9 mm50 pair 1034 For Non-Jelly filled cables of size .63 mm20 pair 1035 For Non-Jelly filled cables of size 1.5 mm2 pair 1036 For Non-Jelly filled cables of size 1.5 mm²2 pair 1037 Supply ,Installation, testing and commissioning of Fiber Optic Patch panel (LIU) for following type & number of fiber for OFCs including all accessories for terminating, pigtails with Connectors, patch cords with connectors, Splicing sleeves and splice tray including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge 1038 For 6 fiber Mono mode cable with LC pigtails and LC patch cords 1039 For 6 fiber Mono mode cable with SC pigtails and LC patch cords 1040 For 6 fiber Mono mode cable with ST pigtails and LC patch cords 1041 For 6 fiber Mono mode cable with LC pigtails and SC patch cords 1042 For 6 fiber Mono mode cable with LC pigtails and ST patch cords 1043 For 6 fiber Mono mode cable with SC pigtails and SC patch cords 1044 For 6 fiber Mono mode cable with SC pigtails and ST patch cords 1045 For 6 fiber Mono mode cable with ST pigtails and SC patch cords 1046 For 6 fiber Mono mode cable with ST pigtails and ST patch cords 1047 Termination of optical fiber cables for various systems including supply of all hardware, splice connectors, accessories, including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge 1048 6 Fiber 1049 SUPPLY OF COMMUNICATION / FIRE ALALRM CABLE / CONDUITS / DUCTS 1050 Supply of communication, fire alarm & control paired cables of following sizes as per EIL standard specification No.6-51-0052, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1051 Jelly filled cables of size .9 mm20 pair 1052 Jelly filled cables of size .9 mm10 pair 1053 Non-Jelly filled cables of size .9 mm5 pair 1054 Non-Jelly filled cables of size .9 mm2 pair 1055 Non-Jelly filled cables of size 1.5 mm2 pair 1056 Non-Jelly filled cables of size .9 mm50 pair 1057 Non-Jelly filled cables of size .63 mm2 pair 1058 Supply of Mono mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1059 6 Fiber multitube construction 1060 Supply of Multi mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1061 6 Fiber multitube construction 1062 Supply of HDPE ducts for laying of optical fiber cables between various substations, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1063 HDPE duct with overall dia. Upto 60mm 1064 HDPE duct with overall dia. above 60mm 1065 CIVIL WORKS/M.S. CHEQUERED PLATE 1066 Making through and through cut outs in pockets of size 150 mm dia in the RCC floor/walls of trenches/buildings of thickness upto 200mm for facilitation cable entries using concrete cutting machines including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer -in-charge 1067 Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trench dimensions shall be measured). 1068 Excavation and backfilling of trenches in all types of soil including rock. 1069 Excavation and backfilling of trenches in all types of soil except rock. 1070 Supply and laying of 40 mm size gravel in one layer of 100/150 mm thick including dressing of soil surface and laying the aggregate in uniform layer and density, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge ( Aggregate will be measured in boxes of size 1.5 m x 1.5 m x 0.5 m which shall be taken as 1 cubic metre, the boxes are to be furnished by the contractor free of cost for measuring purposes). 1071 40 mm size gravel. 1072 Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge. 1073 Fine river sand. 1074 Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured). 1075 Bricks. 1076 Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1077 6 mm thick M.S. chequered plate. 1078 Making through and through cut outs in pockets of following shape and size in the RCC floor/ walls of trenches/ buildings of thickness above 200 mm and upto 400 mm for facilitating cable/ duct entries, using concrete cutting machines and making cut out good using plastering and painting including all material and labour as per approved drawings, specification of this tender and directions of Engineer-in-charge. 1079 Rectangular Cut Out of length 200 mmwidth 200 mm 1080 Circular Cut Out of diameter 150 mm 1081 LAN SYSTEMS 1082 Supply, installation, mounting, testing & commissioning of following Ethernet switches including performance warranty certification(for LAN) of 25 years through OEM, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-charge. 1083 Etherswitch Rack Type-I 1084 PAINTING & MARKING 1085 Letter painting and marking of all buses of switchboards, all incomers, bus couplers, outgoings with details of Tag No, feeder rating in KW/Amp, sending end source, in the front of the panels and bus bar, panel nos.etc. on the rear side of the panels for all switchboards, all other substation equipment viz.transformers, capacitors, neutral grounding resistors, VFD panels, other panels, etc for equipment housed in electrical substations including supply of all material such as stickers, enamel paints, stencil, etc including supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge. 1086 Each alphabet/character above 2 inch and Upto 4 inch in height/length 1087 Each alphabet/character upto 2 inch in height/length 1088 Each alphabet/character above 4 inch and Upto 8 inch in height/length 1089 Each alphabet/character above 8 inch and Upto 12 inch in height/length 1090 Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz.light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors,field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required,supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge. 1091 Each alphabet/character above 2 inch and Upto 4 inch in height/length 1092 Each alphabet/character upto 2 inch in height/length 1093 Each alphabet/character above 4 inch and Upto 8 inch in height/length 1094 Each alphabet/character above 8 inch and Upto 12 inch in height/length 1095 INSTRUMENTATION 1096 PRESSURE GAUGES AND ACCESSORIES (Incl. supply of Impulse pipe/Tubing material) 1097 Installation of Line mounted or Remote mounted or Local Gauge Board mounted Pressure gauge/ Pressure gauge with Pulsation Dampener/ Syphon/ Overrange Protector (direct/ surface mounted/ diaphragm seal type) inclusive of mounting of instrument, supply of piping and tubing materials such as valves, fittings, pipes, tubes, compression fittings, as per specification, supply and erection of supports, mounting on support, (if support required), laying of capillary on supports, fabrication and installation of manifolds/ impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Gauge Board, Yoke, and Calibration. 1098 In Carbon Steel as per Standard 7-52-1103 1099 In Carbon Steel as per Standard 7-52-4079. 1100 DIFFERENTIAL PRESSURE GAUGES (Incl. supply of Impulse pipe/Tubing materials) 1101 Installation of Differential Pressure gauge with/ without pulsation dampner/Syphon/ overrange protector including one side capillary type)/ Diaphragm seal type Differential Pressure gauge, surface/ yoke mounted inclusive of mounting of instrument, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply and erection of supports, mounting on support, laying of capillary on supports, fabrication and installation of manifolds/ impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument and Calibration 1102 In Carbon Steel as per Standard 7-52-4077. 1103 In Carbon Steel as per Standard 7-52-4078. 1104 PRESS.INSTRUMENTS (Incl. supply of Impulse pipe/Tubing material) 1105 Installation of Pressure Transmitters/ Pressure Switches (with or without Pulsation Dampener, Overrange Protector)/ Diaphragm seal type Pressure Transmitters/ Diaphragm seal type Pressure Switches including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration. 1106 In Carbon Steel as per Standard 7-52-1101 1107 In Carbon Steel as per Standard 7-52-1159 1108 In Carbon Steel as per Standard 7-52-1188 1109 In Carbon Steel as per Standard 7-52-1102 1110 In Carbon Steel as per Standard 7-52-1163 1111 In Stainless Steel as per Standard 7-52-1159 1112 DIFFERENTIAL PRESSURE INSTRUMENTS (Incl. supply of Impulse pipe/Tubing materials) 1113 Installation of Differential Pressure Transmitters (including one side capillary type)/ Differential Pressure Switch(including one side capillary type)/ Diaphragm seal type DP Transmitters/ Diaphragm seal type DP Switch including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, ,supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration. 1114 In Carbon Steel as per Standard 7-52-1140 1115 In Carbon Steel as per Standard 7-52-1192 1116 DIFFERENTIAL PRESSURE (FLOW) TRANSMITTERS (Incl. supply of Impulse pipe/Tubing material) 1117 Installation of Differential pressure(with or without integral manifold)/ Diaphragm Seal Type Differential Pressure flow instruments including Mounting on Yoke, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compressive fittings as per specifications enclosed,supply of supports for impulse lines/ manifolds/ capillary, fabrication and Installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instruments, all Electrical/ Pneumatic connections, Yoke and Calibration. 1118 In Carbon Steel as per Standard 7-52-3489. 1119 In Carbon Steel as per Standard 7-52-3490. 1120 In Carbon Steel as per Standard 7-52-3491. 1121 In Stainless Steel as per Standard 7-52-3490. 1122 ULTRASONIC FLOWMETER 1123 Installation of Transmitters/ Preamplifiers for ultrasonic flowmeters on yoke/ instrument (if required) including Straight length spool piece with pressure and temperature compensation loop including laying and termination of interconnection cable supports for cables as required, painting of supports but exclusive of supply of instrument, yoke and calibration. 1124 Installation of Transmitters/ Preamplifiers for Ultrasonic Flowmeters 1125 DIFFERENTIAL PRESSURE (LEVEL) TRANSMITTERS (Incl. supply of Impulse pipe/Tubing material) 1126 Installation of DP type/ Diaphragm Seal DP type Level Instrument including mounting on Yoke, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compressive fittings, as per specifications enclosed, supply of supports for impulse line/ capillary/ manifold, fabrication of manifolds and erection wherever required, laying of capillary on supports, fabrication and installation of impulse lines with support as per Standard indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument,all Electrical/ Pneumatic connections, Yoke and Calibration. 1127 In Carbon Steel as per Standard 7-52-1523. 1128 In Carbon Steel as per Standard 7-52-1524. 1129 LEVEL GAUGES (Incl. supply of Impulse pipe/Tubing material) 1130 Installation of Level Gauges on Vessel/ Piping/ Standpipes with minor modification wherever required, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings, as per specifications enclosed, fabrication of primary piping, fabrication and installation of drain valve/ vent valve assembly as per Standard indicated below, hydraulic testing of gauge, installation of illuminators/ non-frosting extension if required but exclusive of Supply of Gauges and Illuminators. 1131 In Carbon Steel as per Standard 7-52-1527 1132 SERVO TYPE TANK GAUGES 1133 Installation/ interconnection of Servo type Gauges with/ without Tank Farm Management (TFM) System components. Installation of Gauge, Isolation ball valve, Calibration chamber on flanged equipment nozzle, with or without still well, Junction boxes with barriers, power switch, all Electrical connections but exclusive of Supply of Instrument, still well and Calibration/ Setting of gauges. 1134 Servo Gauge Installation 1135 RADAR LEVEL INSTRUMENTS 1136 Installation of radar sensor and antenna, flanged type connection on equipment nozzle/ rail mounting with/without still well, but exclusive of supply of instruments. Installation of electronics units (total system for indication, transmission, marshalling etc. for one tank), including mounting on Yoke, supply of angle tray with supports, fabrication and erection of supports and laying of cable up to instrument/probe with clamps, termination of cables at both ends, but exclusive of supply of Instruments, supply of yokes and Calibration. 1137 Installation of Top Mounted Radar 1138 Installation of tank side indicator/electronic unit (total system for indication/ transmission/marshalling etc., as required for one tank) including mounting on yoke/support, fabrication and erection of supports, laying and termination of interconnecting cable up to instrument/ indicator with clamps, termination of cables at both ends, painting of supports but exclusive of supply of instruments, yoke, cables and calibration. 1139 Tank Side Indicator 1140 TEMPERATURE INSTRUMENTS 1141 Installation of Temperature Indicators/ Gauges (Filled system/ Bimetallic) RTD/ Thermocouple/ Temperature Switches/ Temperature transmitters with flanged thermowell inclusive of installation of machined/ built-up thermowells on the nozzle and installation of Instruments, Electrical/ Pneumatic connection but exclusive of Supply of Instruments/ Elements/ Thermowell, and Calibration. 1142 Temperature Indicator/ Gauges (Bimetallic Type) with thermowell on flanged wells 1143 TEMPERATURE TRANSMITTERS (REMOTE MOUNTED) 1144 Thermocouple/ RTD element with thermowell, along with Temperature Transmitter remote mounted. Installation of transmitter including mounting on yoke, fabrication and erection of supports with clamps and laying of extension/RTD cable upto thermocouple, termination of cables at both ends, painting of supports but exclusive of Supply of Instruments, Cable, Yoke and Calibration. 1145 Temperature transmitter and RTD. 1146 Temperature Transmitter and RTD with flanged well 1147 Multipoint temperature transmitter with Thermocouple / RTD 1148 MISCELLANEOUS ITEMS AND DEVICES 1149 Mounting of Miscellaneous instrument items as listed below on Yoke; fabrication and erection of Supports and including installation of instrument items,paintingofsupportsbutexclusiveofSupplyofInstrumentitems, Piping/ Tubing material / Calibration and supply and erection of Yoke support. 1150 ER probe assembly with accessories like flange, valve etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1151 Corrosion coupon assembly with accessories like flange, valve etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1152 Weather proof Push Button Station/ Selector Switches. 1153 Corrosion Transmitters 1154 CALIBRATION/ TESTING 1155 Cleaning, adjusting stroke/ positioner, stroke speed checking of Control and On-off (Shutdown) valves. Providing equipments, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable and loop testing. Excludes flow calibration 1156 Control Valves 1157 Self Actuated Pressure reducing valves 1158 Cleaning, set pressure tests of Pressure Relief and Thermal Relief Valves. Providing equipment, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable. Excludes flow calibration. 1159 Sizes upto 3/4 x 1 threaded 1160 Inlet Sizes upto 2 flanged, rating 150# to 2500# 1161 Cleaning, calibration of the instrumentslisted below including removal of instrumentfromreinstalledlocationslikepanels,enclosures,racks,field etc.,andfixingthembackinrespectiveplaces,providingequipments, necessarytestjig,InstrumentAir,NitrogenCylinders,testreports,all consumable, exceptforspecialimportedtestequipments for electronic instruments to be supplied by owner if available. 1162 Pressure gauges 1163 Pressure transmitters 1164 Differential Pressure Gauges 1165 Differential Pressure Transmitters for Flow, Level and D.P. 1166 Temperature gauges 1167 Temperature Transmitters 1168 Tank Level Instrument (Radar type) 1169 Servo Type Tank Gauges 1170 Electronic Local Indicator 1171 Cleaning, checking and functional tests for flowmeters. Providing equipments, necessary test jig, Instrument Air, test reports, all consumable, except for special imported test equipments for electronic instruments to be supplied by owner if available. Excludes flow calibration. 1172 Ultrasonic flowmeters 1173 LOOP CHECKING 1174 Loop checking (excluding calibration/ testing) of the instruments listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060. 1175 Pressure transmitters 1176 Differential Pressure Transmitters for Flow, Level and D.P. 1177 Temperature Transmitters 1178 Special Level Instruments/ Guided Wave / Ecclipse type Radar level instruments 1179 Tank Level Instruments (Radar type) 1180 Electronic Local Indicator 1181 Speed / Vibration Transmitter 1182 Push Button/Selector Switches/Lamps 1183 Control valve positioner 1184 Corrosion Transmitter 1185 Loop checking (excluding calibration/ testing) of the flowmeters listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060. 1186 Ultrasonic flowmeters 1187 SUPPLY ITEMS 1188 Supply of Instrument items as per specifications enclosed elsewhere in the Tender. 1189 24 Orifice plate as per Instrument data sheet no. B861-700-YF-DS-0001. 1190 2/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0001. 1191 3/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0001/B861-851-YF-DS-0001. 1192 4/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-851-YF-DS-0001. 1193 Magnetic Level Gauge as per Instrument data sheet no. B861-701-YL-DS-2900. 1194 Breather valve as per Instrument data sheet no. B861-701-YB-DS-3200. 1195 Retractor Tool for ER probes system & Corrosion coupon system as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1196 Tubular ER Probe system (Tag No. 701-CP-1701) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-1701), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3001 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1197 Tubular ER Probe system (Tag No. 701-CP-1801) with ER probe assembly,corrosion transmitter (Tag No. 701-CT-1801), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3002 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1198 Tubular ER Probe system (Tag No. 701-CP-1901) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-1901), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3003 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1199 Tubular ER Probe system (Tag No. 701-CP-2001) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-2001), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3004 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1200 Tubular ER Probe system (Tag No. 701-CP-2101) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-2101), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3005 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1201 Corrosion coupon system (Tag No. 701-CC-1701) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3001 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1202 Corrosion coupon system(Tag No. 701-CC-1801) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon locationas per data sheet no. B861-701-YI-DS- 3002 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1203 Corrosion coupon system(Tag No. 701-CC-1901) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3003 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1204 Corrosion coupon system(Tag No. 701-CC-2001) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3004 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1205 Corrosion coupon system(Tag No. 701-CC-2101) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3005 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1206 24 V DC loop powered spare corrosion Transmitter. 1207 Type: Non-contact type Radar Level Instrument (Tag No. 700-LT-1601)as per data sheet no.B861-700-YL-DS-2000 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART / 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1208 Type: Non-contact type Radar Level Instrument (Tag no. 700-LT-1602)as per data sheet no.B861-700-YL-DS-2001 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply,Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1209 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2201) as per data sheet no.B861-701-YL-DS-2000 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316 , Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1210 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2203) as per data sheet no.B861-701-YL-DS-2001 , Smart Transmitter with integral display, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1211 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2204) as per data sheet no.B861-701-YL-DS-2002 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply.Gauge Head: 6 Flanged connection / Top mounted , Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1212 Type: Non-contact type Radar Level Instrument (Tag No. 851-LT-5501) as per data sheet no.B861-851-YL-DS-2000 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART / 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1213 Type: Non-contact type Radar Level Instrument (Tag No. 851-LT-5502) as per data sheet no.B861-851-YL-DS-2001 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply.Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1214 Type: Servo Level Instrument (TagNo. 701-LT-2202) as per data sheet no.B861-701-YL-DS-2003 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART/ 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1215 Signal cableXLPE insulatedFRLS 2 QUAD X1.5 mm2 as per data sheet no.B861-000-YS-DS-7006. 1216 2/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0002. 1217 Signal cableFR2 QUAD X1.5 mm2 as per data sheet no.B861-000-YS-DS-7009. 1218 Industrial grade 4 1/2 digit digital Multimeter including accessories like battery, connecting pin, carry bag. 1219 Industrial grade digital mA loop calibrator including accessories like battery, connecting pin, carry bag. 1220 Industrial grade Multifunction calibrator with low , high pressure pump including accessories like charger, connecting pin, carry bag. 1221 Universal hand-held HART communicators with accessories including charger, connecting pin, carry bag. 1222 Differential Pressure (Flow) Transmitter-HART as per data sheet no. B861-700-YI-DS-3150 & B861-851-YI-DS-3150. 1223 Differential Pressure (Flow) Transmitter-HART as per data sheet no. B861-700-YI-DS-3151. 1224 Differential Pressure Transmitter-HART as per data sheet no. B861-700-YI-DS-3200. 1225 Differential Pressure (Level) Transmitter-HART as per data sheet no. B861-701-YI-DS-3050. 1226 Pressure Transmitter-HART as per data sheet no. B861-700-YP-DS-3001,B861-700-YP-DS-3002, B861-700-YP-DS-3003 & B861-701-YP-DS-3001. 1227 Pressure Transmitter-HART as per data sheet no. B861-701-YP-DS-3002 & B861-851-YP-DS-3002. 1228 Pressure Transmitter-HART as per data sheet no. B861-701-YP-DS-3003 & B861-851-YP-DS-3001. 1229 Multipoint Temperature Elements - RTD with thermowell as per data sheet no. B861-701-YT-DS-4050. 1230 Temperature Elements - RTD with thermowell as per data sheet no. B861-700-YT-DS-4101, B861-701-YT-DS-4002, B861-851-YT-DS-4001. 1231 Temperature Transmitter-HART as per data sheet no. B861-700-YI-DS-3100, B861-701-YI-DS-3100, B861-701-YI-DS-3101, B861-701-YI-DS-3102 & B861-851-YI-DS-3100. 1232 Temperature Elements - RTD as per data sheet no. B861-701-YT-DS-4001. 1233 Signal cableFR 1PX1.5 mm2 as per data sheet no.B861-000-YS-DS-7008. 1234 Pressure Gauges as per data sheet no. B861-851-YP-DS-1100 & B861-700-YP-DS-1100, B861-701-YP-DS-1100. 1235 Temperature Gauges with thermowell as per data sheet no. B861-851-YT-DS-4100, B861-700-YT-DS-4105, B861-701-YT-DS-4100. 1236 Pressure Gauges as per data sheet no. B861-700-YP-DS-1101, B861-701-YP-DS-1101. 1237 Differential Pressure Gauges as per data sheet no. B861-700-YP-DS-1102, B861-701-YP-DS-1102. 1238 Temperature Gauges with thermowell as per data sheet no. B861-700-YT-DS-4104, B861-701-YT-DS-4101. 1239 Signal cableXLPE insulatedFRLS 12PX1.5 mm2 1240 Signal cableXLPE insulatedFRLS 1PX1.5 mm2 1241 Supply of Junction boxes of various types and specifications 1242 Junction Box, Weatherproof type for 12 Pair Cable 1243 Junction Box, Weatherproof type for 3 Way 1244 Supply of Cable glands ofvarioustypes and specifications 1245 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 1/2 NPTM 1246 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 1 1/2 NPTM 1247 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 3/4 NPTM 1248 Supply of plugs for cable entries of varioustypes and specifications 1249 Plug ,weatherproof type, SS 304 material, 1/2 NPTM 1250 Plug ,weatherproof type, SS 304 material, 1 1/2 NPTM 1251 Plug ,weatherproof type, SS 304 material, 3/4 NPTM 1252 Supply of compression tube fittings in Stainless Steel of various types and specifications 1253 Male Connector: Material: SS-316 : Size: 1/2 NPTM X 1/2 OD 153 Bar 1254 Male Connector: Material: SS-316 : Size: 1/4 NPTM X 1/4 OD 153 Bar 1255 Male Connector: Material: SS-316 : Size: 1/2 NPTM X 1/4 OD 153 Bar 1256 SS 316 Ball Valve 1/2 TH 41 Bar. 1257 Tube Union: Material: SS-316 ; Size: 1/2 OD x 1/2 OD 153 Bar 1258 Tube Cap; Material: SS-316 ; Size : 1/2 OD 153 Bar 1259 6 Way Air Manifold SS316 1260 Supply of instrument tubes of different types and specifications 1261 SS316L tube 1/2 OD 153 Bar 1262 SS316L tube 1/4 OD 153 Bar 1263 Supply of pipe and pipe fittings 1264 SS316 Pipe 1 PL End, SCH. 40S 1265 10% of impulse piping / tubing material subject to minimum 1 number (1 meter for pipe / tube), whichever is higher, of each type, size, rating & material wise (such as valves, fittings, pipes, tubes, compression fittings as listed in the list of items of installation standard no. 7-52-3489, 7-52-3490, 7-52-3491, 7-52-1527, 7-52-1523, 7-52-1524, 7-52-4077, 7-52-4078, 7-52-1192, 7-52-1140, 7-52-1103, 7-52-4079 , 7-52-1101, 7-52-1102, 7-52-1159, 7-52-1188 & 7-52-1163) in the overall SOR quantity as per specification as a Mandatory spare. 1266 SS316 Nipple 1/2 TH x TH, SCH. 80S 1267 SS316 Nipple 1 TH x PL, SCH. 40S 1268 SS316 Nipple 1 PL x PL, SCH. 40S 1269 SS316 Equal Tee 1 SW, 3000# 1270 SS316 Elbow 1” SW, 3000# 1271 SS316 Cap 1/2” TH, 3000# 1272 SS316 Cap 1” TH, 3000# 1273 SS316 Coupling full 1” SW, 3000# 1274 SS316 Globe Valve 1 SW, body rating: 800#, end rating: 3000# 1275 JUNCTION BOX INSTALLATION 1276 Installation of weatherproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG Copper wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings for cable size 12Px0.5/1.0/1.5/2.5 mm² Signal/Alarm/ Control. 1277 Installation of weatherproof three way junction boxes for Power including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG Copper wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings for cable size 2C x 2.5 mm² 1278 LAYING OF CABLES 1279 Laying of instrumentation cables for signal, alarm, shutdown, control and signal cable on ducts, main trays, perforated trays, angle trays, trenches (including opening of cable duct covers if requiredthrough IRCs {Instrument Road Crossings}) including clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire, providing and fixing identifying tags and megger testing but exclusive of supply of cables and erection of ducts, main tray, perforated tray/ angle trays and preparation of cable trench. 1280 Signal / Alarm / Control Cables of cable sizes 1P x 1.5 / 2.5 mm² 1281 Signal/ Alarm/ Control Cables of cable sizes 24C /12P x 1.5/ 2.5mm² 1282 Laying of power cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/ angle tray and preparation of cable trench 1283 For cable size 2C x 2.5 mm² 1284 EARTHING 1285 Supply, laying and termination of both ends of earthing cables from earth grid pit to the DCS/ Local panels/ Barrier earth bus bars in trays/ conduits/ trenches as required. 1286 At both ends of earth grid/ Instruments of copper wire (12 AWG) in trays and conduits as required excluding earth-pit preparation and electrode installation. 1287 PIPING / TUBING / FABRICATION WORK 1288 Fabrication and erection of SS Air lines and fittings including supply/ fabrication/ erection of supports, installation of distribution, pneumatic testing and painting of supports but exclusive of supply of pipe and fittings as per standard 1289 For size 1 1290 Laying of Bare/ PVC covered copper tubes/ SS tubes on perforated trays including clamping, termination at both ends, providing identifying tags at both ends and Air testing, but exclusive of supply of copper/SS tubes, fitting and erection of perforated tray/ angle tray 1291 1/2 / 12 mm O.D . (for SS tubes) 1292 Erection of SS Air distribution manifold and fittingsincludingsupply/ fabrication/ erection of supports, pneumatic testing andpaintingofsupportsbutexclusiveofsupplyofSSAir distribution manifold and fittings 1293 Installation of 6-way Air Manifold (1/2) as per Standard 7-52-1905 1294 Tubing Hook-up of Control valves/ Pneumatic Transmitters etc. with air filter regulator / positioner / solenoid valves / Current to Pneumatic converters etc. as per Standards 1295 as per standard 7-52-3982. 1296 RADIOGRAPHY - CARBON STEEL WELD JOINTS 1297 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Gauges 1298 In Carbon Steel as per Standard 7-52-1103. 1299 In Carbon Steel as per Standard 7-52-4079. 1300 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differrential Pressure Gauge 1301 In Carbon Steel as per standard 7-52-4077. 1302 In Carbon Steel as per standard 7-52-4078. 1303 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations 1304 In Carbon Steel as per Standard 7-52-1101. 1305 In Carbon Steel as per Standard 7-52-1159. 1306 In Carbon Steel as per Standard 7-52-1188. 1307 In Carbon Steel as per Standard 7-52-1102. 1308 In Carbon Steel as per Standard 7-52-1163. 1309 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure Instruments 1310 In Carbon Steel as per Standard 7-52-1140. 1311 In Carbon Steel as per Standard 7-52-1192. 1312 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments 1313 In Carbon Steel as per Standard 7-52-3489. 1314 In Carbon Steel as per Standard 7-52-3490. 1315 In Carbon Steel as per Standard 7-52-3491. 1316 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Level) Instruments 1317 In Carbon Steel as per Standard 7-52-1523. 1318 In Carbon Steel as per Standard7-52-1524. 1319 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Magnetic Level Gauges 1320 In Carbon Steel as per Standard 7-52-1527. 1321 RADIOGRAPHY - CS SPECIAL, ALLOY STEEL, SS 1322 Radiography conforming to the requirements of the Piping Class for all weld joints in Piping of Instrument air supply distribution, In Stainless Steel as per Standard 7-52-1905. 1323 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations 1324 In Stainless Steel as per Standard 7-52-1159. 1325 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments 1326 In Stainless Steel as per Standard 7-52-3490. 1327 Fire protection of instrument cable duct/trays 1328 Supply and erection of fire protection material for instrument cable ducts as per specification enclosed elsewhere with tender 1329 Run of Duct 600mm(W) X 300mm(H) 1330 Supply and erection of fire protection of cable trays as per specification enclosed elsewhere with tender 1331 Run of Tray 100mm (W) X 30mm (H) 1332 Run of Tray 60 mm (W) X 20mm (H) 1333 Run of Tray 150 mm (W) X 75 mm (H) 1334 Run of Tray 300 mm (W) X 75 mm (H) 1335 STRUCTURAL 1336 Supply, Fabrication and erection of Galvanised Iron duct and its supports as per standard. Duct configurations include Duct Equal Tee, Duct Expander Tee, Duct Reducer Tee, Duct Offset Bend, Duct with Reducer, Vertical Plane Tee, Vertical Plane Elbow, Duct Bridge (jumpover), Sleeves. 1337 Run of Duct 1000mm (W) X 400mm (H) 1338 Run of Duct 600mm (W) X 300mm (H) 1339 Run of Duct 800mm (W) X 300mm (H) 1340 Supply and erection of prefabricated FRP perforated trays with covers as per specifications enclosed elsewhere in tenderdocument and its support including tees, bends and elbows 1341 tray of 60 mm (W) X 20 mm (H) 1342 tray of 150 mm (W) X 75 mm (H) 1343 tray of 300 mm (W) X 75 mm (H) 1344 tray of 100 mm (W) X 30 mm (H) 1345 CANOPY FOR INSTRUMENTS AND JUNCTION BOXES 1346 Supply of Prefabricated FRP canopies along with mounting accessories for local instruments, Transmitters, Junction Box etc. for mounting on the stanchion and alignment as per standard 7-52-0105 1347 FRP Canopy (All sides closed) - Field Instruments 1348 FRP Canopy (All Side Closed) - Temperature Transmitter and Loop Powered Indicator 1349 FRP Canopy For Junction Box - Front Side Open 1350 FRP Canopy (All Side Closed) - Guided Wave , Mass Flow Meter 1351 FRP Canopy for RTD / Thermocouple 1352 Erection of Prefabricated FRP canopies for local instruments, Transmitters, Junction Box etc. on the stanchion and alignmentas per standard 7-52-0105 1353 FRP Canopy (All sides closed) - Field Instruments 1354 FRP Canopy (All Side Closed) - Temperature Transmitter and Loop Powered Indicator 1355 FRP Canopy For Junction Box - Front Side Open 1356 FRP Canopy for RTD / Thermocouple 1357 FRP Canopy (All Side Closed) - Radar Level Instruments 1358 GENERAL SITE WORK 1359 Supply of Yoke supports for transmitters/ preamplifiers (wherever applicable) including supply, fabrication and erection of instrument yoke of all types and painting of yoke supports but exclusive of mounting of Instrument on supports. 1360 2 Yoke supports as per standard 7-52-0101 1361 Erection of 2 Yoke supports/ stanchions for Instruments but excluding supply and fabrication of Yoke support. 1362 Erection of2 Yoke supports for instruments excluding supply of Yoke 1363 Supply, fabrication and installation of structural supports with MS channel/angle/plates etc. for supports ofmiscellaneous instruments/cabinets/panels including cutting, welding , bolting, rivetting, groutingincluding supply and installation of installation hardware like anchor bolts/nuts etc., painting of supports including supply of paints as per specification, including all labours and materials and completion of jobs in all aspects as per drawings/directions of Engineer-in-Chargenor paid). 1364 Structural steel ISMC 100 1365 Identification of instrument items wherever required including supply of approved colour of paint/ paints (Fluorescent), painting of tag number (approx 25-50 mm high) on instrument item like transmitter, switches, level gauges, control valves etc. as specified by Engineer-in-Charge. 1366 Identification of instrument items 1367 Supply, Fabrication & Installation of Concrete Pedestal (RCC) for supporting JB/Yoke but exclusive of supply of JB/Yoke as per specifications/drawing attached 1368 Size 500 mm x 500 mm x 600 mm 1369 SITE ACTIVITIES BY MECHANICAL CONTRACTOR 1370 Supply & wrapping of single layer PIR Insulation (Cold conservation type insulation ) with thickness of 50mm for 1/2 impulse lineconsist of insulation blocks fixed with adhesives, joint sealants, protected from moisture/ water ingress by vapour barrier, vapour stop and covered with a weather protection jacket after cleaning the impulse lines of dust, rust, grease in line withJob specification for Insulation of piping & equipment ( B861-000-06-43-IL-S001 ) attached in the tender. The wrapping of the insulation around impulse line shall cover it completely without leaving any gap. Scope of supply & wrapping by Contractor includes all material, tools, tackles & labour etc. to complete the work in all respects. 1371 Supply & wrapping of single layer PIR Insulation (Surface condensation type insulation ) with thickness of 25mm for 1/2 impulse lineconsist of insulation blocks fixed with adhesives, joint sealants, protected from moisture/ water ingress by vapour barrier, vapour stop and covered with a weather protection jacket after cleaning the impulse lines of dust, rust, grease in line withJob specification for Insulation of piping & equipment ( B861-000-06-43-IL-S001 ) attached in the tender. The wrapping of the insulation around impulse line shall cover it completely without leaving any gap. Scope of supply & wrapping by Contractor includes all material, tools, tackles & labour etc. to complete the work in all respects. 1372 Transportation of all types of valves (Including Control Valves, Special Control Valves, Motor Operated Valves, PRDS, Control valves, On-Off/Shutdown valves, Self actuating valves) from Owners storage points to contractors stores/worksite and installation of valvesfor all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1373 Inlet Valve size - 12 , Rating - 300# 1374 Inlet Valve size - 1 , Rating - 300# 1375 Inlet Valve size - 1 1/2 , Rating - 300# 1376 Inlet Valve size - 3 , Rating - 300# 1377 Transportation of all types of Safety Valves, Pilot Operated Safety Valves from owners storage point to contractors store/worksite and installation of valves for all ratings including assembly of valves, accessories if any, at alllocations and fixing of gaskets, bolts/nuts wherever required as per drawings, specifications and as per the directions of engineer-in-charge. 1378 Inlet size - 1 , Rating - 150# 1379 Inlet size - 2 , Rating - 150# 1380 Inlet size - 4 , Rating - 150# 1381 Inlet size - 3/4 , Rating - NPT 1382 Impulse line painting (uninsulated) as per painting specification for project 1383 Instrumentation impulse line of size 1/2 for temp. (-)14 to 80 degC 1384 Impulse line painting (insulated) as per EIL painting specification for project. 1385 Impulse line size of 1/2 with material Carbon Steel for temp. (-)45 to 125 degC 1386 ENVIRONMENT 1387 Condensate Water Treatment Plant 1388 CONDENSATE WATER TREATMENT PLANT, WITH COMPLETE ACCESSORIES & AUXILLARIES (As per Document no. B861-000-17-42-SS-1001): The scope of work shall include design, engineering, procurement, fabrication, supply, transport, handling, storage at site, erection, civil, electrical, piping, painting, mechanical and instrumentation works, testing, pre-commissioning, commissioning, trial run and guarantee of condensate water treatment system and handing over of the same to the Owner. 1389 EQUIPMENT - PACKAGE 1390 Design, engineering, procurement of raw materials and bought out components, manufacture, assembly, inspection, testing, painting (both primer and finish coat) , erection, testing &commissioning of following Basket Strainers along with associated equipment/items complete in all respect for efficient & satisfactory operation as per enclosed Scope of Work (Doc no. B861-000-80-42-SOW-3001) & Process data sheets. 1391 BASKET STRAINERS, Tag Nos. 701-STR-1701/1702 1392 BASKET STRAINERS, Tag Nos. 701-STR-1801/1802 1393 BASKET STRAINERS, Tag Nos. 701-STR-1901/1902 1394 BASKET STRAINERS, Tag Nos. 701-STR-2001/2002 1395 BASKET STRAINERS, Tag Nos. 701-STR-2101/2102 1396 Supply and Installation of Wall mounted Split Air Conditioners for Store Officer cabin : Supply of single phase inverter controlled Split Air Conditioner with compatible stabilizer (copper winding) complete with all accessories and fittings, including supply of first fill of refrigerants (non-CFC and eco-friendly), remote control, transportation from vendors works to site, unloading at site, handling, transportation to contractors store and from contractors store to work site, storage at site, assembly at site, installation and other field works including civil-structural works complete in all respect, testing, painting, insulation, commissioning, handing over to client. Split unit shall have wall mounted indoor unit and outside located air cooled condenser (outdoor unit) with insulated refrigerant piping (considering approx 10 m length between indoor and outdoor unit), controls and accessories, electrical and civil works(e.g. civil work related to concealing of refrigerant piping, drain piping to the nearest drain, cabling (considering approx 10 m length between indoor and outdoor unit) of AC units) as required including the structural steel framework, pedestal/bracket to mount the indoor and outdoor units, supports & clamps for refrigerant piping/cables, stabilizer, hold down nuts & bolts, spares for commissioning and start up etc. as per the enclosed Job Specification and other documents referred therein and instruction of engineer-in-charge for each equipment including accessories. 1397 Inverter Type Split Air Conditioner of capacity 1.5 TR having star rating 5 (BEE 5 star rating or equivalent) 1398 EOT CRANE (SAFE AREA APPLICATION) FOR MATERIAL STORE/ WORKSHOP BUILDING :Radio Remote Control(1 Working+ 1 Stand by) Operated-Design, engineering, manufacture, procurement of raw materials and bought out components, supply, fabrication, assembly, shop painting (primer + finish coat), inspection, testing (at manufacturers shop), packing and supply of double girder type EOT Crane including supply of all commissioning spares, special tools and tackles as applicable, mandatory spares, first fill of lubricant, consumables,erection material & documentation, transportation from Vendors works to designated storage site, handling, loading, unloading and storage, complete site works including transportation from storage site to work site, storage & handling at work site, assembly at site, erection installation, testing, touch-up painting, pre commissioning, commissioning, performance guarantee test run including arrangement of test loads, completing thework in all respects and handling over to Client, as per drawing, specifications, scope of work and instructions of engineer in charge and other attachment included in Tender for following EOT Crane.NOTE 1: Span or/and travel length of crane may undergo minor changes of ±0.5 meter during detailed engineering, for which no price & time implication shall be entertained.NOTE 2: Height of lift may undergo minor changes by ±0.5 meter during detailed engineering, for which no price & time implication shall be entertained.NOTE-3: Contractor shall arrange/bring adequate certified test loads during testing at EOT crane location. To and Fro transportation of test loads with cage (including loading, handling, unloading etc.), including taking back of test load after successful performance test from worksite and supply of manpower shall be in scope of Contractor). 1399 1 No. Double Girder E.O.T Crane with Main hook SWL (Safe Working Load) 15 MT , Auxillary hook SWL 3 MT , Span -12.7 m, Long Travel - 30 m , Height of lift - 8 m, M5 duty along with rails, fixtures and other accessories.(Refer Scope of Work , Job Specification & Electrical specifications ) enclosed elsewhere with this tender document). 1400 UNIT RATES FOR E.O.T CRANE FOR ADDITION/DELETION PURPOSE 1401 Unit Rate (ADDITION / DELETION) for ±0.5m in HEIGHT OF LIFT (over & above 0.5 m from specified data) 1402 Unit Rate (ADDITION / DELETION) for ±0.5m in SPAN (over & above 0.5 m from specified data). 1403 Unit Rate (ADDITION / DELETION) for ±0.5m in LONG TRAVEL (over & above 0.5 m from specified data) including rail fixtures. 1404 EQUIPMENT - ROTATING 1405 Handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owners storage points to work site / contractors stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations,(including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipmentforNDT, testing, carrying out trial and start-up runs and testing under supervision of manufactures / customer personnel, rectifying defects (if any), insulation (as applicable),precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE: Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied prefabricated spools / commercial length between various skids of an equipment package (payable at the rate provided against piping SOR items). 1406 Pump Packages (all types) with drivers, auxiliaries and accessories. 1407 All Types of Pumps (Electric Motor Driven) along with driver, auxiliaries and accessories (Single Skid). 1408 Chemical Dosing Packages 1409 Skid mounted chemical dosing packages along with all auxiliaries and accessories. 1410 Procurement of Rotating Equipment Packages by Contractor.Engineering and Procurement of Rotating Equipment, handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owners storage points to work site / contractors stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations,(including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipmentforNDT, testing, carrying out trial and start-up runs and testing under supervision of manufactures / customer personnel, rectifying defects (if any), insulation (as applicable),precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE: Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied prefabricated spools / commercial length between various skids of an equipment package (payable at the rate provided against piping SOR items). 1411 Diesel Engine based Electric Generator Set Packages with auxiliaries and accessories. 1412 Equipment Tag No. 701-DG-001 as per Document No. B861-000-80-42-SOW-3001 1413 EQUIPMENT - STATIC 1414 STORAGE TANKS 1415 PLATE WORK 1416 Plate work for Fixed Roof Tanks (Cone and Dome roof tanks) and covered Floating Roof tanks except Floating Roof:Procurement of all plates as per specifications, transportation to work site, fabrication and erection of shell, bottom (Sketch plates and annular plates including backing strips), cone roof, Dome roof, compression ring/knuckle plate, plate fabricated wind girders, wind girder opening, bearing plates for pipe supports, datum plates, shell manhole- necks, bolting and cover flanges for shell-man-holes, reinforcement pads for shell manholes, nozzle reinforcing pads, roof manhole-necks, bolting and cover flanges for roof manholes, reinforcing pads for Roof manholes, clean-out door assembly (including davit assembly), gusset- support for wind girders, Sump for drain nozzle, pads for all appurtenances and attachments, fabrication and installation of all items as per drawing, conducting tests such as vacuum test, MP/DP test, pneumatic test, oil penetrant examination, Grouting work (including the supply of grouting material, as required for the tanks installed on ring wall foundation) underneath the Annular/ bottom plateas per the specifications attached, tank hydrotest, etc. for shell, bottom and roof as specified, radiography including supply of films, all heat treatment specified in drawings/ specifications/ codes, preparation of drawings as per specifications, standards and relevant codes and getting the same reviewed by Owner/EIL, providing all temporary structures, clamps, wedges, including arrangement of all materials, consumables, labour, equipment, machinery, tools, tackles etc. to complete the work in all respects as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge.All bolting, gaskets wherever required as per scope of supply and scope of work shall be supplied and installed by Contractor. Spares 10% bolting (min. 2 nos.) and 200% spare gaskets shall be included in Contractors scope. Any other (Commissioning etc.) spares as mentioned in tender specifications shall be also be included in Contractors scope.Quoted price shall be inclusive of supply of all bolts, nuts, gaskets including spares. 1417 IS 2062 Gr. E250 (A, BR, B0, C) 1418 SA 516 Gr. 60/ 70 1419 STRUCTURAL/PIPES 1420 STRUCTURAL/ PLATE WORK :Supply, fabrication, erection, inspection and testing of steel structure for cone roof/ dome roof supporting structure including curb angle, spiral stairway, cage ladder, handrail, top and intermediate platform, grating for stairway steps and platform, rolling ladder including track for floating roof, anchor chairs,name plates, earthing connections, ladder rungs for ladders in covered roof tanks, wind girder fabricated from rolled section, wind girder bracings/ support, external structural supports, supports for shell extension for foam nozzles in case of floating roof tanks, stiffeners for shell extension plate of stairway, ventilation slots and over flow slots for covered floating roof tank including SS wire mesh, preparation of drawings, getting the same reviewed/ approved by owner/ EIL, arrangement of all materials, consumables, labour, equipment/ machinery, tools and tackles required to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1421 Roof structure as per Standard/Drg. 1422 SA 36 1423 IS 2062 1424 SA 516 Gr.60/70 1425 STILL WELLS/ DIP PIPES :Supply, fabrication, erection, inspection and testing ofstill well for gauge hatch, still well for level transmitter/ level switches, still well for temperature element including flanges on all still wells, dip pipes (process / instrumentation), pipe fittings, drilling of holes in still well/ dip pipes, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1426 SA 333 GR6 1427 SA 106 Gr. B 1428 STRUCTURAL PIPES (CS GALVANISED):Supply, fabrication, erection, inspection and testing of pipe specification for pipe handrails (CS and galvanised), arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1429 PIPES(CS GALVANIZED) 1430 APPURTENANCES 1431 Supply, fabrication, installation, welding, radiography, heat treatment, inspection and testing as required for the following nozzles (reinforcing pads covered under plate work) pipe, nozzle flanges and blind / companion/matching flanges (including davit/ hinge assembly for Man way) wherever shown on drawings and standards along with gaskets and boltings including supply of mandatory spares, conducting air pressure test for reinforcing pads, preparation of drawings, getting the same reviewed by Owner/EIL, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications , standards, codes, scope of work, scope of supply and instructions of Engineer-in- Charge. All internal bolting shall be SS 304 as a minimum and contractor shall include the same in his scope of supply and shall be included in nozzleassembly quoted price. Spare gaskets ( 2 nos.) and 10% spare bolting (minimum 2 nos.) shall be included in Contractors scope of supply and shall be included in nozzle assembly quoted price. 1432 Roof Nozzle 150 Class WNRF Type 1.5 InchSize SA 350 LF2 Material 1433 Roof Nozzle 150 Class WNRF Type 2 InchSize SA 105 Material 1434 Roof Nozzle 150 Class WNRF Type 8 InchSize SA 105 Material 1435 Shell Nozzle 150 Class WNRF Type 2 InchSize SA 105 Material 1436 Shell Nozzle 150 Class WNRF Type 4 InchSize SA 105 Material 1437 Shell Nozzle 150 Class WNRF Type 6 InchSize SA 105 Material 1438 Roof Nozzle 150 Class WNRF Type 2 InchSize SA 350 LF2 Material 1439 Roof Nozzle 150 Class WNRF Type 3 InchSize SA 350 LF2 Material 1440 Roof Nozzle 300 Class WNRF Type 3 InchSize SA 350 LF2 Material 1441 Roof Nozzle 150 Class WNRF Type 6 InchSize SA 350 LF2 Material 1442 Roof Nozzle 150 Class WNRF Type 8 InchSize SA 350 LF2 Material 1443 Shell Nozzle 150 Class WNRF Type 2 InchSize SA 350 LF2 Material 1444 Shell Nozzle 150 Class WNRF Type 3 InchSize SA 350 LF2 Material 1445 GOOSE NECK VENT WITH WIRE MESH:supply of materials,fabrication, installation,welding, radiography, heat treatment, inspection and testing as required for the (reinforcement pads covered under Plate work) goose neck vent with wire mesh (SS 304 as minimum) for the following vent materials. 1446 Size 2 InchMaterial SA 106 Gr. B 1447 INSTRUMENTS 1448 Transportation of following instruments from Owner/Storage yard/stores and installation of the same in position as per instructions of Engineer-in-Charge/Supplier. (Contractor shall take care so that no damage occurs while handling these instruments). 1449 Pressure Transmitter Instrument 1450 Level Transmitter Instrument 1451 Breather Valve Instrument 1452 Emergency Vent Instrument 1453 Temperature Gauge Instrument 1454 CALIBRATIONCarrying out calibration of tanks including supply of strapping tapes, scaffolding wherever required, arranging the visit of competent authority, all accessories, labour, preparation and submission of calibration charts duly approved by Competent authority etc. and complete the work in all respect as per Codes, specifications, standards and instructions of Engineer-in-Charge 1455 Diameter (Meters) : upto 10 Height (Meters) : upto10 1456 Diameter (Meters) : > 10 to 25 Height (Meters) : > 10 1457 DESIGN, SUPPLY & INSTALLATION OF EMERGENCY VENT (Lumpsum)Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery, documentation as per the enclosed M/s EIL specification and installation of Emergency Vent etc. to the satisfaction of the Engineer- in Charge. 1458 DESIGN, SUPPLY & INSTALLATION OF BREATHER VALVE (Lumpsum):Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery, documentation as per the enclosed EIL specification and installation of breather valves etc. to the satisfaction of the Engineer-in-charge. 1459 Gauge Hatch with Cover:Supply & installation of Gauge Hatch with Cover for the tankages mentioned in the data sheets/ drawings/ specifications as per the Specifications & Standards attached with the tender. Arrangement of machinery, tools & tackles, labour etc. to accomplish the installation of the same shall also be in the scope of Contractor. The following Gauge Hatch with cover are required. 1460 Material: CS 1461 PAINTING OF TANKS 1462 PAINTING FOR CARBON STEEL AND LOW ALLOY STEEL TANKS 1463 ExternalSurfaces (except underside of bottom plate): Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint onallexternalsurfacesoftanksincluding insulatedtanks i.e.externalshell,windgirders,appurtenances,rooftops including top sideoffloatingroofofopentanksaswellascovered floatingrooftanks, external roof supporting structure,associatedstructuralsteelworks,ladders,walkways, platforms,handrails,spiralstairway,rollingladderandtrack, internal surface of shell above maximum liquid level exposed to atmosphere for open top or floating roof tanks asper painting system defined below and otherrequirementsasspecifiedinrespectiveEngg.datasheets, stencillingtankno., capacity, name of storedproduct,paintingEmblem aspertheattachedsample,includingsupply of metallicandnon-metallic materials,primerandpaintofapprovedquality,providingscaffolding, labour,equipment,consumables,etc.tocompletetheworkinall respect asperapplicable standard specifications,standardsattached elsewhere in the tender document andinstructionsofEngineer- in-Charge. All materials shall be supplied by Contractor. 1464 Design Temperature Range: (-) 14 °CTo 80 °CPrimer: 1coat of F-9 @ 65-75μ DFT/coat + 1coat of P-6 @ 40μ DFT/ coat Finish Paint: 2 coats of F-6B @ 100μ DFT /coat + 1 coat of F-2 @ 40μ DFT/ coat Remarks: Total DFT in Microns (minimum) = 345-355 1465 ExternalSurfaces (underside of bottom plate): Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint onunderside of bottom plate (soil side) asper painting system defined below and otherrequirementsasspecifiedinrespectiveEngg.datasheets includingsupplyofmetallicandnon-metallic materials,primerandpaintofapprovedquality,labour,equipment,consumables,etc.tocompletetheworkinall respect,asperapplicable standard specifications,standardsattached elsewhere in the tender document andinstructionsofEngineer- in-Charge. All materials shall be supplied by Contractor. 1466 Design Temperature range (-) 14°C to 80°C, Primer : 1 coat of F-9@ 65-75µ DFT/coat,Finish Paint : 3 coats of F-7 @ 100µ DFT /coat. 1467 Design Temperature Range: -29 °CTo 400 °CPrimer: 1 coat of F-16 @125 micron Finish Paint: 1 coat of F-16 @125 micron Remarks: total DFT : 250-300 micron 1468 InternalSurfaces:Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint oninternalsurfaceofbottomplate,shell full height,internal surfacesofcone/dome roof,roofstructure,oil side surfacesofpontoons & deck platesandoil side surfaces of doubledecks,internalladder,structuralsteel, internalsupportandinternalaccessories(exceptheatingcoil)asper painting system defined below and requirementsasgiven in the respective engg.datasheets. Supply of metallic and non-metallic materials, labour, primer andpaint of approved quality, equipment, consumables,etc. to complete the work in allrespect, as per applicable specifications, standardsattached elsewhere in the tender document and instructions of Engineer- in-Charge. All materials shall be supplied by Contractor. 1469 Design Temperature Range: -14 °CTo 60 °CPrimer: 1 Coat of F-6A@100 µ DFT/coat Finish Paint 2 Coats of F-6A@ 100µ DFT/Coat(2x100=200) Remarks: - 1470 Design Temperature Range: - °CTo - °CPrimer: - Finish Paint 3 coats of vinylchloride co- polymer @ 75µ/Coat; (3x75=225) Remarks: - 1471 EQUIPMENT ERECTION 1472 TOUCH-UP PAINT APPLICATION (UNINSULATED EQUIPMENT) FOR CS VESSEL 1473 Application of field primers and finish paint(Supply by Others) on C.S vessels, PHE and other equipment, including rubdown and touch up of shop primer (primer as per applicable specification) wherever required as per attached specification, providing scaffolding for all heights, labour, material, tools and tackles, consumables, supervision etc. to complete the work in all respect as per specifications, drawings, equipment details for painting and direction of Engineer in-Charge for all type of uninsulated equipment. The surface area is as per respective temperature ranges given in applicable specification. Note: Surface preparation, primer and finish paint already carried out by equipment supplier. 1474 EQUIPMENT ERECTION:Transportation of reactors, columns, vessels, silencers, heat exchangers (shell and tube, plate fin, plate) and electric heater etc. from owners storage point to work site, assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs, erection of wooden pillow for cold equipments, stacking of multi-tier exchanger(which are stored in unstacked condition), arranging hooks for test ring/ test flanges in heat exchangers, installation of demister, internal gratings, distributor, pipe davit, installation of mixer/agitator,cleaning and flushing by water, draining, drying by compressed air, arranging all tools, tackles, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1475 Equipment weighing less than 30 MT but 10 MT and above 1476 TOUCH-UP PAINT APPLICATION (INSULATED EQUIPMENT) FOR CS VESSEL 1477 Application of field primers and finish paint(Supply by Others) on C.S vessels, PHE and other equipment, including rubdown and touch up of shop primer (primer as per applicable specification) wherever required, as per attached specification, providing scaffolding for all heights, labour, materials, tools and tackles, consumables and supervision etc. to complete the work in all respect as per specifications, drawings, equipment details for painting and direction of Engineer in-Charge. The surface area is as per respective temperature ranges given in applicable specification. Note: Surface preparation, primer and finish paint shall be provided by equipment supplier. 1478 EQUIPMENT UNLOADING: Unloading of Equipment from trailer at designated receiving point, Transportation of the same and handling over to owner at designated storage point for the following as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1479 Equipment weighing less than 50 MT but 30 MT and Above 1480 Equipment weighing less than 30 MT but 10 MT and above 1481 LETTERING AND STENCILING:Surface preparation, supply and application of primer and paint on insulated and uninsulated equipment for lettering, stenciling on vessels, columns, drums, for the purposes of identification (Equipment Name, Equipment Number & Service Description) as per applicable painting specification enclosed elsewhere in the tender document, arranging scaffolding for all heights, labour, materials, tools, tackles, supervision etc. to complete the work as per specifications and instructions of Engineer-in- Charge. 1482 ERECTION OF DRESSED-UP EQUIPMENT:Transportation of columns and vessels from owners storage point to work site, dressing up of the column/vessel by contractor , assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs,arranging all tools, tackles, machinery, consumables,erection of completely dressed-up equipment, & arranging allinstruments, labour, ancillary, etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge.Dressing up of column(As applicable as per the requirement of the tender): Supply/Application/installation of insulation, installation of ladders and platforms, installation of piping spool and support (wherever applicable), installation of demister, internal gratings, distributor, pipe davit etc on the Column/Vessel, cleaning and flushing by water, draining, drying by compressed air etc to complete the job in all respects as per the requirements of the specifications & standards attached else where in the tender. 1483 Equipment(Dressed-up) weighing less than 50 MT but 30 MT and Above 1484 ERECTION OF BURIED EQUIPMENT : Transportation of vessels from Owners storage point to worksite, repair/ touch up of finish paint, arrangement of all accessories, equipments, labour etc., placing/erection of vessel in trenches/pits including assembly of parts, subassemblies, aligning, verticality checking, grouting, tightening of foundation bolts,arranging all tools, tackles, machinery, consumables etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1485 Equipment weighing less than 30 MT but 10 MT and Above 1486 WELDING & NDT OF CUT NOZZLES / SUMP / BOOT OF BURRIED VESSELS:Assembly of cut nozzles/Sump/Boot(as shown in Respective Engg. Data Sheet), vertically checking, alignment, Welding of cut nozzles , NDT such as 100% radiography ,UT , surface preparation of the weld seam portion, application of primer, painting, arranging all tools and tackles, machinery. Consumables, transportation/handling of equipment, labour etc to complete the work in all respects as per drawings & instruction of Engineer-in charge. 1487 MOC : Carbon Steel ,Nozzle size : 2 1488 MOC : Carbon Steel ,Nozzle size : 3 1489 MOC : Carbon Steel ,Nozzle size : 6 1490 MOC : Carbon Steel ,Nozzle size : 8 1491 MOC : Carbon Steel ,Nozzle size : 20 1492 MOC : Carbon Steel ,Nozzle size : 24 1493 EQUIPMENT INSULATION 1494 COLD INSULATION: Providing cold insulation including supply of all insulating andanciliarymaterial,protectivecovering,consumablesand othernecessarymaterials,testingofthematerialasrequiredincluding transportationofthematerialstoworksites,applyinginsulationon surfacesasspecified,includingallpreparatoryworksthereon,allbinding, tying,lacing,stitchingand/orotherwisesecuring,providingvapour barrier,finishingwithplain/corrugatedsheetcladdingorasspecified, providingbolts,rivets,providing vapour stop etc.arranging necessaryscaffolding,alltoolsand tackles,equipment,apparatusetc.labourandsupervisionandcompleting theworkinallrespectatallheightsasperdrawings,specificationsand instructionsofEngineer-in-Charge. 1495 Shells of vertical vessels, columns, exchangers, reactors, silencers etc.Surface material:CS/AS. Insulation type:Ic (Polyurethane foam). Service: Other than LNG. 1496 Insulation Thickness: 50mm 1497 Shells and heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material: CS/AS. Insulation type:Ic (Polyurethane foam). Service: Other than LNG. 1498 Insulation Thickness: 50mm 1499 STRUCTURAL 1500 EARTH WORK (REFER SPECIFICATION NO. 6-68-0003) 1501 Earthwork excavation in soil 1502 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1503 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 1.5m and upto and inclusive of 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1504 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 3.0m and upto & inclusive of 4.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1505 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 4.5m and upto & inclusive of 6.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1506 SHORING AND STRUTTING 1507 Providing and installing approved type of SHORING AND STRUTTING by open timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed. 1508 Providing and installing approved type of SHORING AND STRUTTING by close timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed. 1509 Backfilling after execution of work 1510 BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps within a LEAD OF 100M, including re- excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete. 1511 BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps beyond a LEAD OF 100M AND UPTO & INCLUSIVE OF 500M including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete. 1512 Transporting & Disposing the SURPLUS EARTH ANDDEBRIS 1513 Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 100M AND UPTO 1KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). 1514 Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 1.0KM AND UPTO & INCLUSIVE OF 3.0KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). 1515 PLAIN & REINFORCED CEMENT CONCRETE: (REFER SPECIFICATION NO. 6-68-0004) 1516 PCC - Non FIM Items 1517 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 Cement: 5 Coarse Sand: 10 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1518 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1519 RCC Substrutures - Non FIM Items 1520 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. foundations, raft, beams, slabs, pile caps, retaining walls, dyke walls, jambs, counterforts, buttresses, pedestals, pipe sleepers, columns, suspended floors, staircases, landings, steps, brackets etc., including equipment/ machine foundations & pedestals viz. compressors, ID & FD fans, pumps, generators, crushers, mills, etc., (including single pour concreting as specified on the drawing), applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1521 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. trenches, culverts, manholes, pipe encasement, catchpits, drains, pits, etc., applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1522 RCC Superstructures - Non FIM Items 1523 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, window sills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/ machine foundations, ramps etc. (including single pour concreting as specified on the drawing), providing cement wash (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING AND SPECIFIED ADMIXTURES) FOR ALL HEIGHTS UPTO & INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in any shape, position, thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1524 HYD Bars / MS Bars - Non FIM Items 1525 Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D (TMT) conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. 1526 Centering and Shuttering - Non FIM Items 1527 Providing and fixing CENTERING AND SHUTTERING in foundations, footings,raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/ silos/ shafts/ hoppers/liquid storage structures etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1528 Providing and fixing CENTERING AND SHUTTERING in superstrctures in retaining walls, jambs, counter-forts, buttresses, equipment/ machine foundations, abutments,columns, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/ bunkers/ silos/ shafts/ hoppers/ liquid storage structures etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1529 Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in foundations in all types of Structures such as Chimneys/ Shafts/ Silos/ tunnels/ bunkers/ hoppers/ liquid storage structures/ domes/ ring wall for tanks, etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1530 Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in superstructures in all types of Structures such as Chimneys/Shafts/Silos/ tunnels/bunkers/hoppers /liquid storage structures/ domes etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1531 Fixing Re-bars in already cast concrete - Non FIM Items 1532 Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm & 20 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturers recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE EXCLUDING REINFORCEMENT BARS. 1533 CONCRETE FOR LIQUID RETAINING/LEAK PROOF STRUCTURES (REFER SPECIFICATION NO.6-68-0005 1534 RCC- Non FIM Items 1535 Providing and laying Leak Proof Reinforced Cement Concrete of GRADE M-30 (minimum Cement content shall be as per EIL Specifications) with 20 mm and down size graded crushed stone aggregates/ gravel at all positions and in any shape and thickness, in SUB-STRUCTURE, leaving pockets, recesses, vibrating, tamping, curing, testing (for leak-proofness) and rendering (if required to give smooth and even surface) in foundations, walls , beams, buttresses, columns, piers, slabs, tunnels, basements, storage bins, reservoirs etc. including cement wash (if no other surface application is specified) but excluding the cost of Reinforcement, Shuttering and specified admixtures, all complete as specified and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR. 1536 Water Proofing Comp. - Non FIM Items 1537 Supplying and mixing of approved brand of integral WATER PROOFING COMPOUND in cement concrete, cement mortar etc. as per manufacturers specifications or 1% by weight of cement (whichever is minimum), to make it leak proof/ water tight etc. all complete as specified and directed. 1538 PVC Water bars - Non FIM Items 1539 Supplying and fixing in position 230mm wide x 5mm thick approved PVC WATER STOPS as per manufacturers specifications in R.C.C. Structures including cutting, fixing, jointing by vulcanising etc. all complete as shown specified and directed. 1540 Separation Layer - NonFIM Item 1541 Supplying and laying separating layer of approved polythylene sheet of mass 1 kg/sqm (minimum) in between base slab and the layer of lean concrete, including cleaning, preparing of surfaces, etc., all complete and as directed by the engineer-in-charge. 1542 STRUCTURAL STEEL WORKSSPEC NO. 6-68-0006 1543 General Steel Works - FIM Items 1544 Transporting from storage yard (or any other location as specified by engineer-in-charge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated STRUCTURAL STEEL (of any Grade)at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled/ hollow sections and/or plates/ bent plates in all types of structural frameworks, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified etc., all complete. ALREADY FABRICATED STRUCTURAL STEEL SHALL (WITH CONNECTION BOLTS) BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE. 1545 General Steel Works - Non FIM Items 1546 Supplying, transporting, storing, fabricating & erecting in position and testing/ examining bolted and/ or welded STRUCTURAL STEEL WORKS of Grade E350BR / E350B0 (conforming to IS:2062) at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled sections and/ or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per jOb Specification No. B861-000-06-42-PLS-01 after fabrication etc., all complete. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. 1547 Painting - Non FIM Items 1548 Supplying and applying FIELD PAINT SYSTEM of approved quality and shade as per Sl. No. 5.2 of Table 5.0 of JOB Specification No. B861-000-06-42-PLS-01 over the coat of shop primer already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat as per Sl. No. 3.1 of Table 3.0 of JOB Specification No. B861-000-06-42-PLS-01 for steel structures (excluding ladders, spiral stairways & hand rails) at all location & levels, all complete as specified, in OFFISTE (COASTAL) areas as well as UNIT (INLAND & COASTAL) areas. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. (Unit rate based on Structural steel weight). 1549 Supplying and applying COATING (Post-erection/ Field) of approved quality and shade as per Sl. No. 4.1 of Table 4.0 of JOB Specification No. B861-000-06-42-PLS-01 for painting over the coat of shop primer & galvanization already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat, for LADDERS, SPIRAL STAIRWAYS & HAND RAILS at all location & levels, all complete as specified. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. (Unit rate based on weight of steel). 1550 STRUCTURAL STEEL WORKS (TUBULAR/HOLLOW SECTION) (REFER SPECIFICATION NO.6-68-0007) 1551 Yst310 IS 4923 1552 Supplying, transporting, storing, fabricating, erecting in position & testing/examining at all locations and levels, bolted and/or welded STRUCTURAL STEEL WORKS of all types using COLD FORMED (RECTANGULAR/SQUARE) HOLLOW SECTIONS conforming to IS: 4923, Grade Yst-310 of approved make in all type of trusses, purlins, girders, side rails, columns, runners, beams, ties, portals, framework, bracing, brackets, sag rods etc. including all handling straightening/ bending if required, cutting to required size & shape, edge preparation, welding & bolting of joints, providing and fixing end caps and plugging holes, fixing in line and level with necessary temporary staging and removal of the same after erection, grouting with Ordinary/ premix free flow Non- Shrink Grout as specified, preparation and submission of detailed fabrication drawings, preparing the exposed surfaces for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per Job Specification No. B861-000-06-42-PLS-01. all complete as specified and directed (SUPPLY OF ALL MATERIALS INCLUDING PLATES IN CONTRACTORS SCOPE) 1553 MISCELLANEOUS STEEL WORKS SPECIFICATIONS NO. 6-68-0008 1554 Anchor Bolts - Non FIM Items 1555 Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxiliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.(SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1556 MS Metal Inserts - Non FIM Items 1557 Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/ any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of primer as per EIL Specification No. 6-79-0020 (or as per Job Specification wherever applicable), etc. all complete for all depths and heights as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1558 GI Pipe Sleeves - Non FIM Items 1559 Supplying, fabricating and fixing in position G.I. PIPE SLEEVES of all diameters including providing necessary staging, cutting, straightening if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support heavy sleeves etc. all complete for all depths and heights as specified and directed. 1560 MS Chequered Plates - Non FIM Items 1561 Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stair treads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per EIL Specification No. 6-79-0020 (or Job Specification, wherever applicable) after fabrication etc. all complete as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1562 MS Grating Cat. A,B - Non FIM Items 1563 Transporting from storage yard (or any other location as specified by engineer-incharge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated Grating for platforms etc., including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening, making the edges smooth, removing the burrs (if required), fixing, tack welding, all complete as specified and directed ALREADY FABRICATED GRATING (WITH CONNECTION BOLTS/CLAMPS) SHALL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE). 1564 Supplying, fabricating and erecting in position at all levels and locations ELECTROFORGED HOT-DIP GALVANISED GRATING (purchased from approved manufacturer by the Contractor) conforming to EIL Standard No. 7-68-0697 (in walkways, platforms, stair treads etc.) including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing with manufacturers supplied Hot-dip galvanised clamps, preparation and submission of fabrication drawings, all complete as specified and directed. SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE. 1565 Making openings in galvanized grating for pipes / ducts etc., at all levels and at at all locations by cutting the existing grating and providing 50x6 galvanised flat as toe protection for the openings by welding and application of galvanized paint as per EIL Standard No. 7-68-0697, all complete. Payment shall be made as per number of openings. 1566 MS Rungs - Non FIM Items 1567 Supplying, fabricating, fixing and keeping in position M.S. RUNGS in R.C.C. works at all depths and heights including handling, transporting the steel to site workshop and site of work, straightening, if required, cutting, bending to shape, necessary tying and welding with reinforcement, adjustment of shuttering, cleaning, surface preparation, shop primer as per EIL Spec. 6-79-0020 (or Job Specification, wherever applicable)and two coats of anticorrosive paint of approved quality on the exposed portion of rungs etc. all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1568 Hand Railing 1000mm - Non FIM Items 1569 Supplying, fabricating and fixing in position at all locations 1000mm high INCLINED HAND RAILING (for staircases) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade M.S. Tubes conforming to IS:1239 including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 4.1 of Table 4.0 of JOB SPEC. B861-000-06-42-PLS-01 preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed). 1570 Supplying, fabricating and fixing in position at all locations 1000mm high HORIZONTAL HAND RAILING (for platforms, walkways, etc. or any other location as directed) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade MS Tubes conforming to IS:1239 and 100x5 MS Toe Plate confirming to IS:2062 (Grade A/B), including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 4.1 of Table 4.0 of JOB SPEC. B861-000-06-42-PLS-01, preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed). 1571 Transporting from storage yard (or any other location as specified by engineer-incharge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated HAND RAILING for platforms etc. including straightening, cutting, bending (if required) welding, bolting, grouting with ordinary grout, all complete as specified and directed. ALREADY FABRICATED HANDRAILING (WITH CONNECTION BOLTS) SHALL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE. (Complete handrail workshall be measured as length of top rail only and not length of each element fixed) 1572 Mechanical Anchor fastners - Non FIM Items 1573 Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 12mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1574 Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 16mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1575 Chemical Anchor Fastner 1576 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 12mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1577 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 16mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1578 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete),packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 20mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1579 Threaded bolts for equipment fixing-Non FIM 1580 Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED BOLTS of Grade C property class 4.8 as per IS:1363 (part 2) of all diameters and length including nuts, washers for supporting equipment on steel structure as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading etc. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1581 BRICK MASONRY (REFER SPECIFICATION NO.6-68-0009) 1582 CLASS 5.0at all depths -Non FIM Items 1583 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths below plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1584 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all heights above plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1585 HALF BRICK MASONARYwith bricks of CLASS 5.0-Non FIM Items 1586 Providing and laying HALF BRICK MASONRY with bricks of CLASS 5.0 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR. 1587 DEMOLISHING AND DISMANTLING (REFER SPEC NO. 6-68-0012) 1588 Brickwork - Non FIM Items 1589 Demolishing BRICKWORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items). 1590 Demolishing BRICKWORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. 1591 RCC - Non FIM Items 1592 Demolishing RCC WORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items). 1593 Demolishing RCC WORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. 1594 Chipping of RCC WORK (taking all necessary safety precautions) by CHISELLING, upto & inclusive of 25mm thickness including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, lapping/welding of reinforcement bars as per drawings, disposal of the unserviceable material to spoil heaps anywhere within the plant boundary, all complete at all heights and depths, as specified and directed. (Excavation and backfilling shall be paid separately under relevant items). 1595 Cutting/ Dismantling RCC work in pavement, slabs, beams, columns, etc upto a depth of 450 mm by using vibration-less spark-free Diamond Saw Cutter of make HILTI (or equivalent) at all depths & heights, in hazardous areas within process units & offsite which are fire prone due to presence of hydrocarbon vapours etc. taking elaborate precautions for dismantling as per fire permit, clearance etc. and work is to be done with extreme caution. The work item includes cost of all necessary accessories, tools & tacklesincluding diamond saw cutter, disposal of RCC Debris upto lead of 100 m& for all lifts (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials, all complete as per drawings, specifications and directions of the Engineer-in-charge. Payment will be made per sq.m.of cross-sectional cut area. Contractor to submit dismantling plan prior to start of dismantling. Dismantling shall be planned in such a way that each cut piece shall weigh not less than 1.6 MT. 1596 Cutting/ Dismantling of RCC block foundations, raft foundations, pile caps, mass concrete, equipment foundations etc. by using vibration-less spark-free Diamond Wire Saw Cutter of make HILTI (or equivalent) at all depths & heights, in hazardous areas within process units & offsite which are fire prone due to presence of hydrocarbon vapours etc. taking elaborate precautions for dismantling as per fire permit, clearance etc. and work is to be done with extreme caution. The work item includes cost of all necessary accessories, tools & tacklesincluding diamond saw cutter , disposal of RCC Debris upto lead of 100 m& for all lifts (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials complete as per drawings, specificationsand directions of the Engineer-in-charge. Payment will be made per sq.m.of cross-sectional cut area. Contractor to submit dismantling plan prior to start of dismantling. Dismantling shall be planned in such a way that each cut piece shall weigh not less than 1.6 MT. 1597 Pockets - Non FIM Items 1598 Making POCKETS/HOLES of sizes upto & inclusive of 200 x200x500mm in RCC/PCC works (taking all necessary safety precautions) by chiselling/drilling, including supply of all tools & tackles, necessary scaffolding etc. cutting of reinforcement bars, cleaning the pockets of all debris, disposal of the unserviceable material to spoil heaps anywhere within the plant boundary all complete at all heights & depths as specified and directed. 1599 PCC _ Non FIM Items 1600 Demolishing PLAIN CEMENT CONCRETE work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation and backfilling shall be paid separately under relevant items) 1601 Demolishing PLAIN CEMENT CONCRETE work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. stacking of all the demolished concrete material at a designated location within the complex limits, all complete as per specifications and directions of Engineer-in-Charge for further processing in mechanical crushers for generating RA/ RCA as per the specifications. (Excavation & backfilling shall be paid separately under relevant items). 1602 Steelwork - Non FIM Items 1603 Dismantling bolted/rivetted/welded STRUCTURAL STEEL WORK of all descriptions (taking all necessary safety precautions), including supply of all tools and tackles, consumables, necessary scaffolding etc., providing temporary bracings as required, cutting (by flame or saw) gusset plates, bolts, nuts, weldings etc., transporting and stacking of the serviceable materials, cleaning the site of work of all unserviceable materials for disposal to spoil heaps anywhere within the plant boundary, all complete at all depths and heights, as specified and directed. 1604 MISCELLANEOUS ITEMS (REFER SPECIFICATION NO. 6-68-0013) 1605 Anticorrosive - Non FIM Items 1606 Providing and laying 50mm thick ANTI-CORROSIVE LAYER under steel storage tanks with screened dry coarse sand mixed with A90 grade bitumen conforming to IS:73 including mixing in drum, heating to the required temperature, with 3% kerosene if required, tamping, dressing to the required slopes to form hard mass of specified compacted thickness etc. all complete as directed. 1607 Sand Filling - Non FIM Items 1608 Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/or other equipment to the specified levels to achieve 85% relative density as per IS:2720 Part XIV, including preparation of subgrade to the required slope, providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge. The rates shall be inclusive of the cost of all labour, material, equipments etc. all complete . 1609 BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE 1610 Supplying and mixing of approved brand of BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE (confirming to EIL Specification No. 6-68-0017) in concrete as per manufacturers specification for protection of reinforcement against corrosion. Supply of admixture in Contractors scope. 1611 BONDING FRESH CONCRETE TO OLD CONCRETE BY EPOXY RESIN BONDING SYSTEM (REFER SPECIFICATION NO. 6-68-0056) 1612 Epoxy Resin - non FIM Items 1613 Providing and applying approved EPOXY RESIN (prepared as per manufacturers recommendation) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiselling, taking off the skin of concrete, application of Epoxy Resin System by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete as specified and directed. (Excavation, backfilling, removal of surplus earth, keeping pit dry by pumping/bailing subsoil water shall be paid separately under relevant items). 1614 FIREPROOFING OF STEEL STRUCTURES (REF SPEC NO 6-68-0033) 1615 Concrete - Non FIM Items 1616 Supply and laying of concrete of grade M30 as per Type-I of EIL Standard Specification 6-68-0033 as fire proofing material with 10 mm and down size graded coarse and fine aggregates including admixture around structural steel members (viz. beams, columns, bracings etc.) all complete; cleaning the steel surfaces, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, vibrating, tamping, curing or providing a layer of approved membrane of curing compound, rendering with cement sand mortar (1:3) wherever required to achieve a smooth and even surface, providing L50x50x6 at corners or as specified in the drawing, applying primer on MS nuts, angles and affected surfaces, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights upto & including 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS INCLUDING CEMENT TO BE SUPPLIED BY THE CONTRACTOR). 1617 Vermiculite Concrete for Structural Steel - Non-FIM Items 1618 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-II of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness around structural steel members (viz. beams, columns, bracings etc.) for the required fire protection from reaching temperature 538 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, applying primer on MS nuts and affected surfaces, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights upto & including 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1619 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-II of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness around structural steel members (viz. beams, columns, bracings etc.) for the required fire protection from reaching temperature 538 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, applying primer on MS nuts and affected surfaces, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights more than 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1620 Vermiculite Concrete for Equipments - Non-FIM Items 1621 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-III of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness on equipment/ vessel skirts, saddles and supports for the required fire protection from reaching temperature 427 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062, hot dipped galvanized welded wire fabric reinforcement of 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566 and tying the reinforcement with the pre welded nuts by galvanized 16 SWG tying wire, including straightening, cutting, bending of the reinforcement, including supplying and welding of additional MS nuts if directed by the Engineer-in-charge, applying primer wherever required, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1622 Mechanical works 1623 Supplying, fabricating and erecting in position MS plates as per detailed drawings, conforming to grade A of IS:2062 on top of all RCC pedestals supporting the sliding saddles of equipments, including cutting, straightening where necessary, rounding rounding unfinished edges by grinding, machining the exposed top surface, making necessary bolt holes, providing and laying ready mixed free flow non-shrink grout below the base plate at all levels & locations, machining top surfaces etc. all complete and as shown and directed. 1624 SAFETY (REFER EIL SPECIFICATION) 1625 Safety Structures - Non FIM Items 1626 Supplying, Transporting, Storing, Fabricating & Erecting in position and testing/ examining bolted and/ or welded Structural Steel Works at all locations and levels in HANGER SCAFFOLDING below piperack, comprising of hangar channels, fabricated pen wen ladder beams, steel planks bent to shape and size and any other sections, if required, all as per sketches/ specifications and load tested for statisfactory performance, including cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, including preparation and submission of detailed fabrication drawings, preparing the surface for painting as per BIS codes after fabrication etc. all complete as specified and directed. All items shall be removed & carried back by Contractor as per instructions of Engineer-in-Charge after completion of works. (Supply of All Material In Contractors Scope). 1627 Providing and fixing double scaffolding system of any height made with 40 mm dia MS tube 1.5 m centre to centre, horizontal & vertical tubes joining with MS tubes, MS tube challies, MS clamps and MS staircase system in the scaffolding for working platform/ staircase etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc., wherever required for inspection of work at required locations with essential safety features for the workmen etc., all complete as per directions and approval of Engineer-in-charge. (Height shall be measured from Floor/ platform from where scaffolding is erected) including providing Aluminium ladders for safe acess of workers. 1628 Supply of Safety Personnel 1629 Supply of HSE personnel SAFETY STEWARD over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1630 Supply of HSE personnel SAFETY SUPERVISOR over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1631 Supply of HSE personnel SAFETY OFFICER over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1632 Supply of HSE personnel HOUSE-KEEPING SUPERVISOR over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1633 GENERAL CIVIL 1634 TANK PADS 1635 PVC Liner 1636 Providing and laying of PVC LINER of thickness 30 MIL conforming to IS:15909 below tank pad foundations or any other placeat all heights & depths without any damage during subsequent activities including handling, transportation, unloading, storage, laying in position, jointing & overlapping as per manufacturers recommendations, including supply and providing Asphalt impregnated fiberboards for anchoring, etc., all complete as per drawings, specifications and directions of Engineer-in-charge. (All materials including consumables shall be in contractors scope of supply) 1637 Providing and laying in position 80mm dia. perforated uPVC pipes conforming to IS:9271 wrapped with 125mm thick layer of 40mm down size stone aggregates in Geotextile fabric, Terrum T 700 / equivalent, below tank pad foundations for all heights & depths complete as per drawings, specifications and directions of Engineer-in-Charge. (All materials including consumables shall be in contractors scope of supply) 1638 Providing and installation of uPVC leak detection well arrangement comprising of 80mm dia. uPVC pipe, tee, blind flange & threaded cap conforming to IS:13592 for leak detection purpose below tank pad foundations at all heights & depths including providing proper jointing as per code requirements or manufacturers recommendations for fitting in already installed uPVC pipes etc. all complete as per drawings, specifications & directions of Engineer-in charge. 1639 GENERAL CIVIL 1640 SITE GRADING & ROCK CUTTING FOR SITE GRADING 1641 Earthwork in excavation for general site grading, roads, embankments, etc. for all heights and depths in all types of soils except soft and hard rock, including clearing and stripping of the areas earmarked for excavation, removing shrubs, grass, bushes, vegetables growth and other objectionable materials, trees up to and inclusive of a girth of 30 cms. (girth measured at a height of one meter from ground level) including uprooting of roots, etc. taking spot levels, excavating to required depth, leveling, dressing and consolidating the excavated surface, sorting out the excavated soil into serviceable and unserviceable materials, transporting and stacking serviceable materials to demarcated areas anywhere inside plant boundary limitas per instructions of Engineer-in-Charge and disposal of unserviceable material anywhere inside plant boundary limit. All complete as per drawings, specifications and directions of Engineer-in-Charge. 1642 ROADS & FLEXIBLE PAVEMENT (UPTO WBM/WMM LAYER) 1643 Earthwork in filling with approved available earth for all heights and depths for road embankments, shoulders or any other place as directed to proper levels, slopes, grades and camber with selected earth (having CBR 8%) obtained from approved approved areas for all leads from Complex Limit including excavation of earth at approved areas, clearing and stripping at approved areas (if necessary) loading, unloading, transportation etc., clearing and stripping as per specifications, uprooting of vegetation, roots and disposal of the shrubs, bushes, roots etc., breaking clods, spreading in layers not exceeding 20 cm loose thickness, watering, ramming and compacting with road roller to give at least 97% of laboratory dry density with heavy compaction as perIS:2720 Part-VIII, providing testing apparatus and testing the degree of consolidation, dressing and leveling, etc. complete including disposal of allunserviceable materials if any within the boundary limit for all leads etc. as per drawings, specifications and directions of Engineer-in- Charge. 1644 Supplying and Laying of Wet Mix Macadam (WMM) in BASE COURSE (Section 406 of MORTH Specification of Road & Bridge works) using tough, clean, sound & durable stone aggregates including premixing the material (mixing in Plug Mill/ Pan Type Mixer), including transportation to site, laying & spreading in layers not exceeding 125 mm compacted thickness & rolling with vibratory roller 80-100 KN static weight or equivalent capacity to proper grade, camber & level with all leads & liftsetc. complete as per drawing, specifications (MORTH, EIL) & directions of Engineer-in-Charge. 1645 Supply of forged/ cast fittings 1646 Supplying the following forged fittings and flanges, conforming to piping material specifications of tender documents and delivering the same to Owners stores/workspot etc. all complete as per the directions of Engineer-in- Charge. 1647 Elbow 90 Degree for following Nominal Sizes and Piping Material Class 1648 Dia. 12 InchPipe Class A33A 1649 Dia. 3 InchPipe Class A91A 1650 Elbow 45 Degree for following Nominal Sizes and Piping Material Class 1651 Dia. 6 InchPipe Class A33A 1652 Dia. 8 InchPipe Class A33A 1653 Dia. 12 InchPipe Class A33A 1654 Dia. 3 InchPipe Class A91A 1655 Eccentric Reducer for following Nom. Dia. 1 x Nom. Dia. 2 and Piping Material Class 1656 Nom. Dia. 1 8 InchNom. Dia. 2 6 InchPipe Class A94A 1657 Equal Tees for following Nominal Sizes and Piping Material Class 1658 Dia. 12 InchPipe Class A33A 1659 Dia. 3 InchPipe Class A91A 1660 Flanges, complete with nuts, bolts, gasket etc., for following Nominal Sizes and Piping Material Class 1661 Dia. 3 InchPipe Class A91A 1662 Supplying the following spectacle blind assembly consisting of two number flanges, spectacle blind, nuts, bolts, gasket etc. complete conforming to piping material specifications of tender documents and all complete as per the directions of Engineer-in-charge. For following nominal size and piping material class 1663 Dia. 3 InchPipe Class A91A 1664 MISC. CIVIL AND STRUCTURAL WORKS FOR U/G PIPING AND OTHER CIVIL WORKS 1665 Providing and laying brick masonry with locally available bricks of specified class (Brick of class lower than specifiedshall not be accepted) in cement mortar 1:4 (1 cement : 4 Coarse sand) in one or more brick thickness and in any shape in foundation and plinth for valve pits, drains, circular/square maholes, wing walls, etc. including providing recesses, openings, etc. including curing, finishing the joints flush below ground level and raking out joints in plinth with all labour and material, etc. complete as per drawings, specifications and direction of Engineer-in-Charge.For following Brick Class. 1666 All materials including cement supplied by the Contractor and Following Brick Class 1667 Brick Class 5 1668 Providing 13mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge. 1669 All materials including cement supplied by the Contractor. 1670 MISCELLANEOUS ITEMS 1671 Supply and installation of combined safety shower and eyewash units as per spec. no.6-66-0038, including providing and fixing of necessary foundation bolts in foundations/ pavement etc. complete. Each safety shower shall have proper sign board with florescent letters showing their location, all complete as per specification, drawings and direction of Engineer-in-charge. 1672 Supplying & Laying 60mm thick interlocking Paver Blocks for footpaths and any other place etc. including providing 40 mm thick sand filling below Paver Blocks including compaction of sand layer, filling the joints by dry sand, providing precast kerb stone of PCC M 30 at edges and at every 6.0m across the foot path, including preparation of compacted base/ sub base etc. all complete as per drawing, standard, specificationand directions of Engineer-in-Charge. (All material including cement supplied by contractor, paver blocks shall confirm to category A as per IRC SP63. Colour and shape of paver block shall be as per Owner requirement.). 1673 Modification Works 1674 MODIFICATION AND EXTRA WORKS ( IF ANY ) Cuting,bevelling,fitup,welding of different sizes of CS piping of all thicknesses in shop ,in position, on ground and at all elevations, transportation of pipes,fittings,flanges etc. from owners storage point to work site/workshop,making necessary scaffolding,consumables,machinery,tools,tackles,labour and supervision including attending to repairs for completing the work as per instructions of Engineer -in -charge 1675 Flame cutting CS piping 1676 Beveling CS piping 1677 Fit-up and welding CS piping 1678 Removal and re-installation of fire hydrant 1679 Removal and re-installation of firefighting equipment (Fire Hydrant), including isolation valve and transporting the equipment, valve, flanges from removal point to work spot, and fixing of nuts, bolts, washers, gaskets as needed for fixing the equipment with matching flange etc. complete, including plugging the existing branch with blind flange as per specification, drawings and directions of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material) 1680 NDT Testing 1681 RADIOGRAPHY :- Performance of radiographic inspection on piping of all types & thicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specificationsand instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractors fault and for additional radiography necessitated due to poor performance of contractors welders shall be done at contractors cost) Note: Unit for radiography quantity is Nos of circumferential weld joints. 1682 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF SPEC FOR NDT REQUIREMENT OF PIPING) 1683 Nominal Dia. 3 Inch 1684 Nominal Dia. 4 Inch 1685 Nominal Dia. 6 Inch 1686 Nominal Dia. 8 Inch 1687 Nominal Dia. 12 Inch 1688 Micrograding 1689 Micrograding of the area as directed to proper level, grade and camber including earthwork in excavation in all types of soils up to a maximum depth of 150mm, removing shrubs, vegetation bushes, grass etc., earth work in filling with select material from available earlier excavated soil and borrow earth (in case the select material from excavated soil is short for filling, filling shall be done with borrow earth, supply & transportation of borrow earth shall be paid separately under relevant item) up to a maximum compacted thickness of 150mm by spreading in layers not exceeding200mm loose thickness, watering, ramming & compacting with road roller or hand roller including hand ramming where road rollers or hand rollers are not accessible to give at least 90% of max. laboratory dry density as per IS:2720 part VII, including transportation, leveling, dressing, disposal of surplus earth, debris, etc. all complete as per specifications, drawings and direction of Engineer-in-charge. (Disposal areas shall be anywhere within the plant complex limit as identified by Engineer-in-Charge.) 1690 Dismantling works 1691 Removal of existing A/G piping 1692 Removal of existing A/G piping of all thickness including cutting, unbolting of flanged joints / cutting of pipe lines wherever required, removing supports, all fittings, flanges etc., cutting of pipes in appropriate lengths for transporting purpose, transporting all material to owners storage point within the complex as designated by Owner including stacking of material and disposing of waste etc. as instructed by Engineer - in - charge. 1693 For C.S. A/G Pipe of following nominal dia. 1694 Nominal Dia 8 Inch 1695 Nominal Dia 4 Inch 1696 Nominal Dia 6 Inch 1697 Nominal Dia 12 Inch 1698 Removal of existing U/G piping 1699 Removal of existing U/G piping including excavation in all types of soils except soft rock and hard rock, including supply of any additional material required so as to expose the pipes for removal / dismantling, taking all safety precautions, supporting existing U/G services, dewatering of surface / sub-surface water as required to facilitate dismantling of pipes, cutting of pipes in appropriate lengths for transporting purpose, removal of soft material from bottom of trench and compacting, backfilling with available selected earth including re-excavating the deposited soil excavated earlier, breaking clods, laying in thickness not exceeding 15cms, watering rolling and ramming by manual methods / mechanical Compactors to achieve 90% laboratory maximum dry density as per IS:2720 Part VII or 85% relative density as per IS:2720 part XIV as applicable, stacking of serviceable / unserviceable material, transporting and stacking of all piping material to Owners storage point, disposal of unserviceable material anywhere inside the complex etc. , all complete as per directions of Engineer-in-Charge. 1700 For CS Piping dismantling, Thickness <=10 mm , For following Nominal Sizes 1701 NB 2 inch - 6 inch 1702 NB 8 inch - 14 inch 1703 Portable/ trolley mounted Extinguishers 1704 Supply and installation of portable DCP ( Dry Chemical Powder Type) extinguisher including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification and directions of Engineer-in-Charge. 1705 Capacity in Kg 10 1706 Supply and installation of portable CO2 extinguishers including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification, data sheet and directions of Engineer-in-Charge. 1707 Capacity in Kg 4.5 1708 Capacity in Kg 2 1709 Painting of A/G pipes and valves 1710 Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per painting specification, drawings and direction of Engineer-in-Charge for all types of un insulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydro testing. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. 1711 Painting of uninsulated surfaces for Industrial marine environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following pipe sizes 1712 Nominal Dia. 12 Inch 1713 Nominal Dia. 4 Inch 1714 Nominal Dia. 3 Inch 1715 Nominal Dia. 6 Inch 1716 Nominal Dia. 8 Inch 1717 Painting of uninsulated surfaces for Industrial marine environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following valve sizes 1718 Dia. Of Valve 12 Inch 1719 Dia. Of Valve 4 Inch 1720 Dia. Of Valve 6 Inch 1721 Dia. Of Valve 3 Inch 1722 Dia. Of Valve 8 Inch 1723 Fabrication and Erection of piping (underground) 1724 FABRICATION AND ERECTION OF PIPING (SPEC. NO.6-65-0030 and 6-44-0012) : Laying and joining of Carbon Steel pipes and specials underground including transportation of all material from Owners storage point to worksite, earthwork in excavation in all types of soilEXCLUDING SOFT ROCK AND HARD ROCK for pipe trenches, saddles, etc. including dewatering of rain and /or sub soil water, shoring & strutting if required, dressing of sides, levelining, grading & ramming of bottom of trench, cutting of pipes if required, fitup, edge preparation, providing corrosion protection tape coating as per specification, on pipes and specials, laying the pipes in trenches to required alignment and levels, welding the same after laying, installation of flanges, blind flanges, tapping for pressure gauges, temperature gauges and all other online instruments and fittings like elbows, reducers, tees, flanges, spectacle blinds and spacer blinds etc., as per piping material specification, fixing of nuts, bolts, gaskets and washers, welding, corrosion protection coating of field joints, cutting of road wherever required and making good the same, testing for the corrosion protection coating as per specification, cleaning and flushing by water/ compressed air, hydrostatic/ pnuematic testing of the system, flushing, backfilling the trenches with select material from available excavated soil including re-excavating the deposited soil excavated earlier, breaking clods and laying in layers of 15 cm compacted thickness, watering, compacting with mechanical means like vibro rammers etc. to 90% of dry density as per IS:2720 Part-VII, disposal of surplus earth/ unserviceable material to demarcated area anywhere within the complex limit etc. complete as per drawings, specifications and instructions of Engineer-in-Charge including connecting the pipes to manhole, including return of all unused / scrap pipe to owners storage point (Pipes and fittings shall be supplied by owner as free issuematerial.) (Depth of excavation for pipe trench shall be upto 3.0m) 1725 Carbon SteelPiping (Non IBR), Thickness <=10 mm 1726 Fabrication, For the following nominal sizes 1727 NB 2 inch - 6 inch 1728 NB 8 inch - 14 inch 1729 Erection including corrosion protection coating, for Water System (Pressure Piping), Forfollowing Nominal Sizes 1730 NB 2 inch - 6 inch 1731 NB 8 inch - 14 inch 1732 Erection including corrosion protection coating, for Waste Water Collection System (Gravity Flow), for following Nominal Sizes 1733 NB 2 inch - 6 inch 1734 Fabrication and Erection of piping (Above ground) 1735 PIPING (ABOVE GROUND): Transportation of all piping items from owners storage point to work site/workshop, fabrication including cutting, edge preparation (including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required), fitup, bending, preheating wherever required, welding, threading, and laying of pipes of all type and thickness over pipe sleepers, overhead on racks and at all elevations, connectingwith equipment nozzles, strainers, orifice assemblies, tapping for pressure gauges etc., fixing of gaskets, bolts, nuts including application of torque wherever required and all other inline instruments and fitting like elbows, reducers, tees, vents, drains, SW valves upto 1.5 NB, alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified,draining, drying by compressed air completing all such works in all respects (including preparation of isometrics as mentioned in the scope of work for the job)as per drawings, specifications and instruction of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material) 1736 Carbon SteelPiping (Non IBR), Thickness <=10 mm 1737 Fabrication, For the following nominal sizes 1738 NB 2 inch - 6 inch 1739 NB 8 inch -14 inch 1740 Erection , for Water System (Pressure Piping), Forfollowing Nominal Sizes 1741 NB 2 inch - 6 inch 1742 NB 8 inch -14 inch 1743 Supply of Carbon steel pipes 1744 Supply of Carbon steel pipes as per Piping material class including transportation of all material to owners store complete as per drawings, specifications and instruction of Engineer-in-Charge. For following nominal size and piping material class. 1745 Nominal Dia. 12 InchPiping Material Class A33A 1746 Nominal Dia. 4 InchPiping Material Class A33A 1747 Nominal Dia. 8 InchPiping Material Class A33A 1748 Nominal Dia. 6 InchPiping Material Class A33A 1749 Nominal Dia. 3 InchPiping Material Class A91A 1750 Supply and installation of valve assembly, flange assembly etc. 1751 Supply and installation of valve assembly consisting of valve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts & bolts per valve assembly, erection of valve in position including fixing of nuts, bolts, gaskets, washers etc. complete as per drawings, specifications and directions of Engineer-in-Charge. 1752 Gate valve assembly for following nominal sizes and piping material class 1753 Dia. 12 InchPMS A33A 1754 Dia. 8 InchPMS A33A 1755 Dia. 6 InchPMS A33A 1756 Dia. 3 InchPMS A91A 1757 Supply and installation of valve assembly consisting of valve, 1 no. flange, 2 no. gaskets and 2 sets of nuts & bolts per valve assembly, erection of valve in position including fixing of nuts, bolts, gaskets, washers etc. complete as per drawings, specifications and directions of Engineer-in-Charge. 1758 Dia. 4 InchPMS A33A 1759 Dia. 6 InchPMS A33A 1760 Globe valve assembly for following nominal sizes and piping material class 1761 Dia. 3 InchPMS A91A 1762 Supplying the flange assembly conforming to piping material specifications and delivering the same to owners stores/ work spot etc. Flange assembly shall consist of 2 no. flanges along with one no. matching gasket and one set of matching nuts &, bolts. All complete as per specifications and directions of Engineer-in-Charge. For following nominal size and piping material class 1763 Dia. 3 InchPMS A91A 1764 Supply, Fabrication and installation of strainers 1765 Supply, Fabrication and installation of strainers as per drawingsetc. complete as per specifications and directions of Engineer-in-Charge. 1766 T-type strainers for following nominal size and piping material class 1767 Dia. 3 InchPMS A91A 1768 fire fighting equipments 1769 Supply, installation, testing and commissioning of following firefighting equipment as per relevant specifications, data sheet, drawing, including transporting the equipment to worksite, fixing of nuts, bolts, washers, gaskets, welding needed for fixing the equipment with matching flange etc. all complete as per drawings, specifications, standards, data sheet and direction of Engineer-in-Charge. 1770 Double headed landing valve 1771 First Aid hose reel wall mounted type 1772 Hose box cabinet Type-II (Wall mounted type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall 1773 Hose box cabinet Type-II (self-supporting type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall 1774 Variable flow Water cum foam monitor of 500/750/1000 GPM capacity 1775 Stand Post Type Fire Hydrant without Pumper Connection 1776 Miscellaneous Items 1777 Miscellaneous 1778 Design, engineering, procurement, supply of all materials and equipment, machinery, civil, structural, electrical, mechanical, instrumentation, piping works including painting works, tape coating on U/G piping, commissioning spares and tools/tackles as per scope of work, specifications, drawings, data sheets etc. and as per directions of Engineer-in-Charge for Auto Actuated High Velocity Spray System on Transformers including taking approval of the complete system from agency appointed by insurance company /Client. Unloading at site, handling, transportation from store to work site, storage at site, fabrication, construction, assembly at site, supply of all labour, installation, field works including civil structural, electrical, mechanical, instrumentation, piping works and supports, testing, pre-commissioning, painting, commissioning and any other activity required to complete the works in all respects including performance guarantee run, handing over to client as per enclosed scope of work, drawings, specifications, instructions to vendors, data sheets and as per directions of Engineer in- Charge. Supply of mandatory spares as per specifications enclosed list/instructions to vendor as per scope of work and specification, drawings and documents as per attached vendor data requirement for all supplies and services etc. complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Delhi View Result →
16.
Defence #9492508 AOC
Tender For REPAIR TO EXTERNAL WATER SUPPLY WORK INCL WATER TREATMENT PLANTS, PUMPS, REPAIR TO BORE WELL, VALVE CHAMBERS AND CLEANING OF OVERHEAD TANK, UG SUMPS INCL MAP PH-II AND OTHER LOC AT RASPUNJA AND REPAIR REPLACEMENT OF LT UG CABLE, FEEDER PILLAR BOXES AND CONNECTED WORKS AT OD ALIPORE AND SAHAPORE MIL CAMP INCLUDING MAP PH-II UNDER GE (C) KOLKATA UNDER GE (C) KOLKATA; 1 Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. 2 Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed. 3 Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. 4 Taking up / down the following size of water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion complete all as specified and directed by the Engr-in-Charge. Note: Necessary earthwork, if any , will be measured and paid separately under relevant items(a) Bore size 150 mm 5 Bore size 100 mm 6 Bore size 80 mm 7 Bore size 50 mm 8 Bore size 40 mm 9 Bore size 25 mm 10 Bore size 20 mm 11 Supply and Laying Steel Water Tubing 150mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 12 Supply and Laying Steel Water Tubing 100mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 13 Supply and Laying Steel Water Tubing 80mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 14 Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 15 Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 16 Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 17 Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 18 Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 19 Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 20 Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 21 Relaying/Re-fixing Galvanised Steel Tubing 50mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed. 22 Relaying/Re-fixing Galvanised Steel Tubing 40mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed. 23 Relaying/Re-fixing Galvanised Steel Tubing 25mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed. 24 Relaying/Re-fixing Galvanised Steel Tubing 20mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed. 25 Supply, laying and testing150 mm bore CIwater mains with flanged ends,centrifugally cast of class LA in any length, laid in trenchescomplete all as specified and directed .Note : Necessary earth-work to be measured and paid separately under relevant items. 26 Supply, laying and testing100 mm bore CIwater mains with flanged ends,centrifugally cast of class LA in any length, laid in trenchescomplete all as specified and directed .Note : Necessary earth-work to be measured and paid separately under relevant items. 27 Supply, laying and testing80 mm bore CIwater mains with flanged ends,centrifugally cast of class LA in any length, laid in trenchescomplete all as specified and directed .Note : Necessary earth-work to be measured and paid separately under relevant items. 28 Supply, laying, connecting and testing of ductile iron pipe 150 DNwith spigot and socket ends class K-9in standard working length conforming to IS-8329-2000 laid in trenches as in repair complete all as specified and directed. 29 Supply, laying, connecting and testing of ductile iron pipe 100 DNwith spigot and socket ends class K-9in standard working length conforming to IS-8329-2000 laid in trenches as in repair complete all as specified and directed. 30 Supply and fixing MS pipe 150 mm dia medium grade and fixing the pipes with existing system by cutting welding including fixing of new flanged joints with rubber gasket including nuts,bolts and washer as per site requirements with proper alignment as in repair complete all as specified and directed. 31 Supply and fixing MS pipe 100 mm dia medium grade and fixing the pipes with existing system by cutting welding including fixing of new flanged joints with rubber gasket including nuts,bolts and washer as per site requirements with proper alignment as in repair complete all as specified and directed. 32 S&F Gun metal vertical check valve 100 mm dia heavy duty (ISI marked)flanged end including rubber gasket joints, nuts, bolts etcas in repair complete all as specified and directed. 33 S&F Gun metal vertical check valve 80 mm dia heavy duty (ISI marked)flanged end including rubber gasket joints, nuts, bolts etcas in repair complete all as specified and directed. 34 S&F Gun metal vertical check valve 50 mm dia heavy duty (ISI marked)flanged end including rubber gasket joints, nuts, bolts etcas in repair complete all as specified and directed. 35 S&F Gun metal vertical check valve 40 mm dia heavy duty (ISI marked)flanged end including rubber gasket joints, nuts, bolts etcas in repair complete all as specified and directed. 36 S&F Cast Iron Sluice valve of 150 mm bore of pressure rating PN-1.6 conforming to IS : 14846 – 2000 specifications comprising of cast iron body with control assembly of flanged both ends, stainless steel spindle with extended iron rod of 25mm dia & 3.00 m long alongwith iron wheel head, bolts, nuts & washers with 3mm thick rubber gasketsincluding taking out the old unserviceable one complete all as specified and directed. 37 Supply and fix Cast Iron Sluice valve of 100 mm bore of pressure rating PN-1.6 conforming to IS : 14846 – 2000 specifications comprising of cast iron body with control assembly of flanged both ends, stainless steel spindle with extended iron rod of 25mm dia & 3.00 m long alongwith iron wheel head, bolts, nuts & washers with 3mm thick rubber gaskets including taking out the old unserviceable one complete all as specified and directed. 38 Supply and fix Cast Iron Sluice valve of 80 mm bore of pressure rating PN-1.6 conforming to IS : 14846 – 2000 specifications comprising of cast iron body with control assembly of flanged both ends, stainless steel spindle with extended iron rod of 25mm dia & 3.00 m long alongwith iron wheel head, bolts, nuts & washers with 3mm thick rubber gaskets including taking out the old unserviceable one complete all as specified and directed. 39 Repair to u/s sluice valve 150mm bore bytaking out cleaning & derusting with acid washing all the parts after removing from site & replacement ofspindle, GM lock nuts, gaskets, nuts both & washer etc to make fully serviceable and re-fixing the samein original position including connection complete all as specified and directed.Note :Spindle will be measured & paid separately. 40 Repair to u/s sluice valve 100mm bore bytaking out cleaning & derusting with acid washing all the parts after removing from site & replacement ofspindle, GM lock nuts, gaskets, nuts both & washer etc to make fully serviceable and re-fixing the samein original position including connection complete all as specified and directed.Note : Spindle will be measured & paid separately. 41 Supply only stainless steel spindle suitable for 150mm bore sluice valve complete all as specified and directed. 42 All as per item No.41.00 but suitable for 100mm bore sluice valve complete all as specified and directed. 43 S&F 50 mm bore Gun metal gate valve as per IS : 778-84,marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed. 44 S&F 40 mm bore Gun metal gate valve as per IS : 778-84,marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed. 45 S&F 25 mm bore Gun metal gate valve as per IS : 778-84,marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed. 46 S&F 20 mm bore Gun metal gate valve as per IS : 778-84,marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed. 47 S&F 100mm bore Cast Iron butterfly valve, BS-5155 double flangedlever operated with necessary rubber gaskets, nuts and bolts and washers of suitable size as in repair complete all as specified and directed . 48 S&F 80mm bore Cast Iron butterfly valve, BS-5155 double flanged lever operated with necessary rubber gaskets, nuts and bolts and washers of suitable size as in repair complete all as specified and directed . 49 S&F 50mm bore Cast Iron butterfly valve, BS-5155 double flanged lever operated with necessary rubber gaskets, nuts and bolts and washers of suitable size as in repair complete all as specified and directed . 50 Lifting and lowering of submersible pump and motor of capacity 17.5/15 HP from bore well with the help of chain pully including scaffolding and all other necessary arrangement complete all as specified and directed by Engr-in-Charge.Note:- (i) One lifting and one lowering should be measued as one unit.(ii)Replacment of minor spare parts i.e impeller key, neck ring, coupling bush and key,nuts bolts, washer etc. reassembling the pump after routine maintenance of serviceable spares and replacment of spare part shall be measured and paid separatelyunder relevant items of BOQ. 51 Repairing thesubmersible pump 17.5/15 HP by cleaning, derusting, and replacment of minor spare parts i.e impeller key, neck ring, coupling bush and key,nuts bolts, washer etc. reassembling the pump after routine maintenance of serviceable spares and replacment of spare parts, testing and commissioning complete all as specified and directed.Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately under Supply only items below. 52 Supply only Suction Bush 53 Supply only Stage Casing Bush 54 Supply only Stainless Steel Shaft 55 Supply only Stainless Steel Sleeves 56 Supply only GM Impeller 57 Supply only Stage casing Ring 58 Supply only NRV 59 Supply only Sort piece with flange 60 Supply only Stainless Steel Nut and Bolt with washer 61 Supply only MS Nut and bolt with washer 62 Supply only Rubber Gasket 63 Material and Labour Rewinding of submersible electric motor AC 3phase 415 volts 50- HZ of capacity 17.5/15 HP with water proof PVC insulated copper wire of same specification after removing the old burnt out winding and replacment of bush bearing etc including testing & commissioning complete all as specified and directed by Engr-in-Charge. 64 Repairing thesubmersible pump 12.5/10 HP by cleaning, derusting, and replacment of minor spare parts i.e impeller key, neck ring, coupling bush and key,nuts bolts, washer etc. reassembling the pump after routine maintenance of serviceable spares and replacment of spare parts, testing and commissioning complete all as specified and directed.Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately under Supply only items below. 65 Supply only Suction Bush 66 Supply only Stage Casing Bush 67 Supply only Stainless Steel Shaft 68 Supply only Stainless Steel Sleeves 69 Supply only GM Impeller 70 Supply only Stage casing Ring 71 Supply only NRV 72 Supply only Sort piece with flange 73 Supply only Stainless Steel Nut and Bolt with washer 74 Supply only MS Nut and bolt with washer 75 Supply only Rubber Gasket 76 Material and Labour Rewinding of submersible electric motor AC 3phase 415 volts 50- HZ of capacity 12.5/10 HP with water proof PVC insulated copper wire of same specification after removing the old burnt out winding and replacment of bush bearing etc including testing & commissioning complete all as specified and directed by Engr-in-Charge. 77 S&F Water pressure gauge 100mm dia in the main line of pump including necessary dirlling welding, taping/Threading of existing line etcwith taking out unserviceable one complte all as specified directed by Engr-in-Charge. 78 Leakage detection in GI water mains upto 150mm bore and necessary repairs including cutting, threading for addition/alteration and insertion necessaryfittings like tee,elbow, branches pieces etc complete all as directed by the Engr-in-Charge. 79 M&L for Construction of brick masonary valve pit chamber of size 1050x1050x1050mm internal dimension using sub class-B bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed and directed. 80 Construction of brick masonary valve pit chamber of sizse 900 x 900 x 900 mm internal dimension using sub class-B bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed & directed. 81 Construction of brick masonary valve pit chamber of sizse 600 x 600 x 600 mm internal dimension using sub class-B bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed & directed. 82 Repair tobrick masonary valve pit chamber (1050x1050x1050 tosize 600 x 600 x 600 mm internal dimension) using sub class-B bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer complete all as specifed & directed. 83 Development of Tube well with suitable capacity compressed air for a period not less than 24 Hrs but till the sand free water is obtained (sand content of water shall not be more than 10ppm) complete all as specified and as directed by Engineer-in-Charge. 84 Lifting and lowering of mono block submersible pump & motor from open well of any capacity& provide all necessary items like new sporting chain ,clamp,nuts and bolts etc all as per directed by Engr-in-Charge.Note:-One lifting, and one lowering should be measued as one job. 85 M&L Rewinding of mono block submersible sewage setmotor of 7.5HP / 10 HPafter taking out the burnt out winding with new PVC water proof copper cable, overhauling and repacement of bush bearing etc complete all as specified and directed by Engr-in-Charge. 86 Dismantling and cleaning thoroughly 7.5HP/10 HPmonoblock submersible sewage pumps set complete and taking out unserviceable worn out spares and overhauling the serviceable spares by derusting etc. and repalcement of minor spares like collaring Impellar key, oil tube, gaskets, nuts, & bolts with washer and cleaning throughly and re-assembling the pump and testing commissioning complete all as directed by Engr-in-Charge.Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately as Supply only items below. 87 Angular contact bearing 88 Lock nut Stainless Steel 89 Impeller CI 90 Line shaft Stainless Steel 91 GI column pipe 5 long both end flange. 92 MS Supporting clamp 93 M&L Rewinding of mono block submersible sewage pump setmotor of 05 HPafter taking out the burnt out winding with new PVC water proof copper cable, overhauling and repacement of bush bearing etc complete all as specified and directed by Engr-in-Charge. 94 Dismantling and cleaning thoroughly 05 HP monoblock submersible sewage pumps set complete and taking out unserviceable worn out spares and overhauling the serviceable spares by derusting etc. and repalcement of minor spares like collaring Impellar key, oil tube, gaskets, nuts, & bolts with washer and cleaning throughly and re-assembling the pump and testing commissioning complete all as directed by Engr-in-Charge.Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately as Supply only items below. 95 Angular contact bearing 96 Lock nut Stainless Steel 97 Impeller CI 98 Line shaft Stainless Steel 99 GI column pipe 5 long both end flange. 100 MS Supporting clamp 101 Repairs Panel board for pump of any size/ any type by disconnecting and taking out old unserviceable wires and spare parts and rewiring the same with same size of copper wire, replacment of nut & bolts with washers,cleaning with blower, painting with one coat of synthetic enamel painting of existing colour including necessary preparation of surfaces including testing and commisioning complete all as specified and directed by Engr-in-Charge.Note:- Any other Electrical fittings connecting to panel board should be measured and paid separately. 102 Supply and fix Fully automatic star delta starter with steel enclosure AC 3 phase, 415 volt 50-60 Hz, type MN-25F relay range 14-23 Amps suitable for 10/15 HP pump motor set fixing on existing LT panel board including taking down old onecomplete all as specified and as directed.Make:- L&T Cat Part No.SS94364,C&S-BE3-D3235N322 or equivalent make of Schneider / Siemens / ABB.etc as specified in the particular specification. 103 Supply and fix 3 pole Power Contactor type ML-2,32A capacity, 2NO + 2NC, 415 V ratings fixing on existing LT panel boardincluding taking down old one complete all as specified and as directed.Make:- L&T Cat No SS90701, C&S-TC1D3210EN5+TAI-DN13 or equivalent make of Schneider / Siemens / ABB.etc as specified in the particular specification. 104 Supply and fix 3 pole Power Contactor type ML-1.5,32A capacity, 2NO + 2NC, 415 V ratings fixing on existing LT panel board including taking down old onecomplete all as specified and as directed.Make:- L&T Cat No SS91851, C&S-TC1D2510EN5+TA1-DN22 or equivalent make of Schneider / Siemens / ABB.etc as specified in the particular specification. 105 Supply and fix Electronic timer ET-100/ST-100, 415 V, 50 Hz fixing on existing LT panel board including taking down old onecomplete all as specified and as directed.Make:- L&T Cat No ST80329OOOO or equivalent make of Schneider / Siemens / ABB.etc as specified in the particular specification. 106 S&F CT Coil fixing on existing LT panel board,capacity 100 amps complete all as specified and as directed. 107 S&F Relay, thermal overload type for ML-2 contactor, 13-21 A fixing on existing LT panel board complete all as specified and as directed. 108 S&F Relay, thermal overload type for ML-1.5 contactor, 1.5-2.5 A fixing on existing LT panel boardcomplete all as specified and as directed. 109 S&F Single Phase Preventer used for oil emerged semi-automatic star delta starter with ( 9 wire ) ON Delay Timer (2-3 min.) and Auto/Manual Switch complete all as specified and directed. 110 Supply and fix PVC insulated round sheathed , copper conductor flexible ,industrial cable 3 core 4.0 sqmm suitable for pump/motorset, 1100 volts grade conforming to IS-694 including taking out the old unserviceable one complete all as specified and directed. 111 Dismantling the channel base and taking out the pump & motor of capacity 5 HP AC 3 phase 415 volt disconnecting the pump motor, opening the pump, cleaning derusting thoroughly, machining inside body of the pump & repairing by replacement collar rings, gaskets, Impeller locknuts, shaft key etc re-assembling the pump including installtion & testing commissioning complete all as specified and directed.Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately underSupply only items below. 112 Stainless Steel Shaft 113 Brass Impeller 114 Gun metal Bush 115 Pump Bearing 116 Motor Bearing 117 Stage casing ring 118 Gland packing 119 stainless Steel Shaft sleeve 120 Casing wear ring 121 Coupling pulley of Pump motor 122 Dismantling the channel base and taking out the pump & motor of capacity 10 HP AC 3 phase 415 volt disconnecting the pump motor, opening the pump, cleaning derusting thoroughly, machining inside body of the pump & repairing by replacement collar rings, gaskets, Impeller locknuts, shaft key etc re-assembling the pump including installtion & testing commissioning complete all as specified and directed.Note:- Spare parts other than minor spares required to be replaced shall be measured and paid seperately underSupply only items below. 123 Stainless Steel Shaft 124 Brass Impeller 125 Gun metal Bush 126 Pump Bearing 127 Motor Bearing 128 Stage casing ring 129 Gland packing 130 stainless Steel Shaft sleeve 131 Casing wear ring 132 Coupling pulley of Pump motor 133 Material and Labour Rewinding of electric motor AC 3phase 415 volts 50- HZ of capacity 05 HP with supper enamel copper wire of same size and heating and vernishing after removing the old burnt out winding including replacement of bearing etc testing & commissioning complete all as specified and directed by Engr-in-Charge. 134 Material and Labour Rewinding of electric motor AC 3phase 415 volts 50- HZ of capacity 10 HP with supper enamel copper wire of same size and heating and vernishing after removing the old burnt out winding including replacement of bearing etc testing & commissioning complete all as specified and directed by Engr-in-Charge. 135 Dismantling of high pressure single head adjustable gear motor of chemical dosing pump and separating the unserviceable parts cleaning the serviceable parts, re-assembling including replacement of old unserviceable parts complete all as specified and directed by Engr-in-Charge.Note:- Spare parts will be measured and paid separately as supply only.Make:-DECLIBAC. 136 Supply only Pump tube complete all as specified and directed by Engr-in-charge. 137 Supply only foot valve (clay weight -3/8 connction) complete all as specified and directed by Engr-in-charge. 138 Supply only Injection check valve 3/8. complete all as specified and directed by Engr-in-charge. 139 Supply only White discharge tube 3/8. complete all as specified and directed by Engr-in-charge. 140 Supply only Connecting nut 3/8 with adapter.complete all as specified and directed by Engr-in-charge. 141 Supply only dia phram valve for DDP complete all as specified and directed by Engr-in-charge. 142 Supply only discharge valve for decrine dosing pump complete all as specified and directed by Engr-in-charge. 143 Material and LabourCuttingPCC foundation for taking out the channel base replacing the same with new channel base complete foundation with PCC 1:4:8 D2 type, using 40mm graded crushed stone aggregate and fixed the pump and motor with grouting bolt of 9 long -4Nos complete all as specifed and directed by Engr-in-Charge. 144 Disconnecting the 2/3 HP unserviceable pump set for servicing , rewinding incl overhauling by replacement of bush bearing of motor/pump and refixing the same after testing & commissioning complete all specified and as directed by Engr-in-Charge. 145 Supplyonly Calcium based High strength Chlorination chemical, Make - Purichlor/Altoccontains chlorine contents not less than 65% with water in proportionate way for maintaining adequate chlorine at all time at Pump Houses as directed by competent authority for water Disinfectioncomplete all as specifed & as Directed. Make : Aquafit / ALTOCH GP/Chlorotech-90, 146 De-watering and cleaning of underground sumps or service tank upto 100000 Gln capacity ( sump of 2 part 50000 Gln capacity each ) cleaning the sump with wire brush,cloth ,bleaching powder,removing alll dirt scale from tank and from mouths of circulating pipes etc through drain pipe or by manually including writing with white paint in tank wall as TANK CLEANED ON with date ,month and year with a minimum 10 CM height capital lettrs/numbers and conducting all connections (if any) after cleaning and testing at different multi-storeyed buildings complete all as specified and directed by Engineer-In-Charge.(a) To drain out the water by using exit valve or our own high capacity dewatering system. (b) Cleaning all the algae formation insied the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks.(c) Fresh water cleaning by high speed jet pump(d) first bacteria screening is desertification by using TERBAC G5 a govt laboratory certified branded halogen compound. (e) Cleaning of the floor of the water tank by industrial vacuum cleaner. (f) The second bacteria screening and sterlizing method by using ultra violet ray with in the tank and kills all suspended bacteria. (g) Cleaning the third bacteria screening and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65. 147 All as per item No146.00 here-in-before but UG sump capacity upto 50000 Gln. 148 De-watering of existing overhead water tank size 50000 Gln capacity atupto 20 feet staging cleaning the overhead tank with wire brush,cloth ,bleaching powder,removing al dirt scale from tank and from mouths of circulating pipes etc through drain pipe or by manually including writing with white paint in tank wall as TANK CLEANED ON with date ,month and year with a minimum 10 CM height capital lettrs/numbers and conducting all connections (if any) after cleaning and testing at different multi-storeyed buildingscomplete all as specified and directed by Engineer-In-Charge.(a) To drain out the water by using exit valve or our own high capacity dewatering system. (b) Cleaning all the algae formation insied the tank by using TERBAC G5 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks.(c) Fresh water cleaning by high speed jet pump(d) first bacteria screening is desertification by using TERBAC G5 a govt laboratory certified branded halogen compound. (e) Cleaning of the floor of the water tank by industrial vacuum cleaner. (f) The second bacteria screening and sterlizing method by using ultra violet ray with in the tank and kills all suspended bacteria. (g) Cleaning the third bacteria screening and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65. 149 Opening of the first topcover from the sump and pumping out all dirt water from sewage sump,Blocking the sewage line to sump providing jute bags at first manhole and cleaning the sump thoroughly with the help of wire brush after removing the sludge/silt and other foreign materials complete removing the blockage fromsump complete of any capacity including removing the sludge from the pump house premises and depositing away from cantonment area complete all as specified and directed by Engineer-In-Charge. 150 Supply of bleaching powder of approved quality for cleaniang /washing the balanceing time, areation tower during descanning , refillling of fresh water in interval as directed by Engr-in-Charge for better cleaningness of valancing tank/areation tower are indicated places completed all as specified and directed. 151 Collecting of Water sample from different location every qtr under Raspunja mil camp in special sterilized container and submitting to Govt. approved test laboratory for chemical analysis complete.Submit to Govt approved Test Lab for Testing of following parameter and submit report to Engineer - in- Charge:-(a) arsenic & Iron (b) Flouride(C) Turbidity(d) Chloride(e) Total Hardness(f) Nitrate(g) Total Coliform,Total Dissolved solids,Copper,Alkalinity,Calcium,Mercury,pH Value,BOD at 27Degree C, COD, Total Hardness, Total coli forms count, Fecal Coli form,E. Coli.and as per ISI& etcNote :- Measurement shall be carried out for one sample including all the test mentioned 152 Materials and Labour Cutting /boreing of existing road / path , hardstandingetc for taking out cable and water pipe to protection with iron cover plate for passing cable,water pipe and making good the disturbed road top surfaces withcement concrete 1:3:6 type C-2, usingof suitable depth and finished withspeed breaker complete all as uder directed by Engineer-in-Charge. 153 S&F Making connection of PP-R distribution branch with PP-R main of Outer dia of pipes 16 to 40 mmby providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed. 154 S&F Making connection of PP-R distribution branch with PP-R main of Outer dia of pipes 50 to 75 mmby providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed. 155 S&F 25mm dia PP-R Gate valves (brass insert) complete all as specified and as directed. 156 S&F 32mm dia PP-R Gate valves (brass insert) complete all as specified and as directed. 157 Supply of laying UPVC pipe of pressure rating 10 KG per Sqcm of dia 20mm with all tube fitting (such is bend, elbow , tees, of medium grade, connector, caps, plug and union etc).Laying in trenches / duct /floor in also cutting pipes screwing and for making bend on pipeing as required after taking down old pipe complected all as specifeid and directed. 158 Supply of laying UPVC pipe of pressure rating 10 KG per Sqcm of dia 25mm with all tube fitting (such is bend, elbow , tees, of medium grade, connector, caps, plug and union etc).Laying in trenches / duct /floor in also cutting pipes screwing and for making bend on pipeing as required after taking down old pipe complected all as specifeid and directed. 159 Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge.Note:- Thickness after punning down shall be measured for payment. 160 Supply and laying in trenches, sub class B over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. 161 Supply and laying in trenches except bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.Note:- old serviceable bricks shall be obtained from taking down item. 162 Taking out old U/S LT UG cable of any size and any description including GI pipe of any dia and bricks for cable protection where ever appeared and all as directed by Engineer-in-Charge.Note:- (i)Serviceable bricks obtained shall be stacked properly for re-use.(ii)Excavation and earth work shall be measured and paid separately. 163 Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 185 Sqmm 3.5 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. 164 All as per item No. 163.00 mentioned here-in-before but 95 Sqmm 3.5 core 165 All as per item No. 163.00 mentioned here-in-before but 70 Sqmm 3.5 core 166 All as per item No. 163.00 mentioned here-in-before but 50 Sqmm 3.5 core 167 All as per item No. 163.00 mentioned here-in-before but 35 Sqmm 3.5 core 168 All as per item No. 163.00 mentioned here-in-before but 25 Sqmm 3.5 core 169 All as per item No. 163.00 mentioned here-in-before but 10 Sqm 2 core 170 S&F Straight through joint kit heat shrinkable 10 to 50 sqmm 4 core for LT 1100 Volts grade complete with jointing materials and accessories suitable for 3.5/4 core XLPEarmoured conductor cable of following sizes including testing of cable after joints all as specified and directed. 171 All as per item No. 170.00 mentioned here-in-before but 70 sqmm to 95 sqmm 3.5 core 172 All as per item No. 170.00 mentioned here-in-before but 120 sqmm to 185 sqmm3.5 core 173 M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation base of poles and other similar locations including demoltion of old PCC/broken PCC complete all as specified and as directed by the Engr-in-Charge. 174 M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate with and including all necessary form work complete all as specified & directed.including demoltion of old PCC/broken PCC 175 M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole/struts and other similar location etc with and including all necessary form workand plastering including demoltion of old PCC/broken PCC complete all as specified and as directed by the Engr-in-Charge. 176 Supply and fix PVC Pole boxes, outdoor type of size 182x180x111 mm IP 65 for pedestrin lighting including fixing with clamp including taking down old unserviceable one complete all as directed by Enginner-in-Charge. 177 Supply and fix PVC Pole boxes, outdoor type of size 250 x 200 x 105mm for flood lighting IP 65 including fixing with clamp including taking down old unserviceable one complete all as directed by Enginner-in-Charge. 178 Supply and fix Digital time switches 2 module 250 V single Phase of 20 Amp rating with contactor fitted inside steel enclosure including taking down old unserviceable one complete all as directed by Enginner-in-Charge. 179 Taking out unserviceable street light of any type and any sizes fromthe site of work complete all as specified and directed. 180 Supply and fix LED decorative post top lantern, 35/40 Watt capacity for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed. 181 Supply and fix LED IP65 rated inverted Pyramid Tripod type, LED Bollard 10/8 Watt capacity with soft 360° light distribution with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed. 182 Supply and fix Pressure die cast powder coated housing with PC diffuser efficient high output LED with IP 66 protection LED bollard light cylindrical shaped 9/10 watt capacity IP 65 protection including necessary connection and taking down old unserviceable one complete all as specified and as directed. 183 Supply and fix LED bollard light tulip shaped 9/10 watt capacity with opal acrylic IP 65 protection including necessary connection and taking down old unserviceable one complete all as specified and as directed. 184 Supply and drawn into thesteel tubular pole, by drilling holes just above the junction box and another holes near street light brackets including inserting PVC insulated stranded copper electric cable of size 2.5 sqmm 2 core& all necessary connetions with junction box andstreet light fittings, complete all as specified and as directed.Note:- Junction box andstreet light fittings shall be measured and paid saperately under relavent item of BOQ/ Sch A. 185 Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.Note-: Excavation to be measuredand paid under sch item no- 1 above and PCC will be& paid under sch item no 10 above.contractor its following iteams have not been considered against items no-29 (i) funnel with watering pipe,wire mesh and copper lugs. (ii) GI protector pipe (iii) Test point 186 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. 187 Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. 188 Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. 189 Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. 190 Material and labour for repair of LT panels/LT feeder piller boxes by carrying out checking thoroughly all electrical connections, lugs busbar, voltmeter, ammeter ,cable glands ,insulator on busbar, and tightening all connections properly with proper size of new nut, bolt, washer as per the site requirements and insulation of busbar with colour code insulation tapes including welding on damage panel and preparation of surfaces internal and external of panels/feeder piller boxes by cleaning with dry cloth /removal dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and rewriting existing letters /numbers as directed and repair the existing PCC basement of the feeder piller box/ LT panel as per site requirement or directed including applying one coat of cement base point after preparation of surfaces and testing complete as per direction of Engineer- in- charge.Note:- Cost ofPainting, Nuts, bolts, washer etc. are deemed to be included in quoted rates. 191 Taking out unserviceable steel poles of any type and any sizes fromthe site of work complete all as specified and directed. 192 M & L steel tubular sewaged pole 9 mtr long completed with MS base plate, finial taper plug nut bolts, screws as specified type 410 SP-31 as per relevant IS specifiecation including two coats of aluminimum paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Note : Earth work/excavation PCC shall be measured and paid seperately. 193 M & L for Scraping, cleaning and preparation of surface of all steel tubular sewaged pole 9 mtr long, cross arms, clamps GI street light bracket etc and applying two coat of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip allround between the juction of aluminium paint and black paint complete as directed and specified. 194 M&L Danger notice plate of 1.6mm thick for LT 20x15 cm mild steel sheet vitreous enamelled white with etters ,figures,and conventional skull and bones in signal redcolour and fixed with Ms clamp bolts and nuts complete all as specified and as directed. 195 Supply and Laying Steel Water Tubing 80mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 196 Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 197 Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings,laid in trenches or any other Situation, complete as all specified and as directed. 198 Supply & fixingManual Open Execution Changeover Switch in sheet steel enclosure, four pole,200 Amps, Manual type, 415 Vincluding taking down old unserviceable one complete all as specified and as directed. 199 Supply and fix MCCB 3 pole 400A, 36KA, 415V thermal and magneticadjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe paneland electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge. 200 Supply and fix MCCB 4 pole 250A, 36KA, 415V thermal and magneticadjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe paneland electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge. 201 Supply and fix MCCB 4 pole 200A, 36KA, 415V thermal and magneticadjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe paneland electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge. 202 Supply and fix MCCB 3 pole 100A, 25KA, 415V thermal and magneticadjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe paneland electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge. 203 Supply and fix MCCB 3 pole 63A, 16KA, 415V thermal and magneticadjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe paneland electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.
Contract Date: Feb 09, 2026 Contract Value : ₹ 25.88 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
West Bengal View Result →
17.
Housing Urban and Rular Development #9481195 Technical Bid
Tender For Special Repair Work At Jnv Gaya-I (Bihar) - SCHOOL BUILDING 2 Structural Repair & Retrofitting 3 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 4 50mm average thickness 5 25 mm average thickness 6 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 7 Bars upto 12 mm diameter 8 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 9 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 10 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 11 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 12 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 13 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 14 Expansion Joint Treatment 15 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to its components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063). 16 Floor Joint of 100 mm gap 17 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints Systemsuitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 18 Wall Joint of 100 mm gap 19 Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 20 Roof Joint of 100 mm gap 21 Repairs to Roof 22 Repairs to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd (Dr. Fixit Make), including cutting the area of plaster in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement: 4 coarse sand) 23 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 24 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 25 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 26 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: 27 Asbestos Cement sheet 28 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m* 29 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 30 Repair to Toilets + Plumbing Works 31 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 32 For thickness of tiles 10 mm to 25 mm 33 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 34 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 600 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 35 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) 36 Providing and filling of cinder in sunken portion. 37 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 38 75 to 80 mm dia pipe 39 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 40 15 mm to 40 mm nominal bore 41 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 42 Up to 150 mm diameter 43 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 44 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 45 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 46 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 47 Rectangular manhole 90x80 cm and 45 cm deep 48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 49 110 mm diameter 50 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 51 a) Coupler 52 110 mm 53 b) Bend 87.5° 54 110 mm bend 55 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 56 75 mm diameter pipes 57 100 mm diameter pipes 58 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 59 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 60 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 61 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 62 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 63 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 64 a) 32mm dia (for wash basin) 65 b) 40mm dia (for sink and urinal) 66 Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe. 67 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 68 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 69 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 70 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 71 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 72 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 73 P-Trap type Floor Trap 110 x 75 mm 74 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 75 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 76 Providing and fixing 100 mm sand cast Iron grating for gully trap. 77 Providing & fixing soil, waste and vent pipes. 78 a) 100mm dia centrifugally cast iron S & S pipe. 79 b)75mm dia centrifugally cast iron S & S pipe. 80 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 81 a) for 100mm dia pipe. 82 b) for 75mm dia pipe. 83 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 84 a) 100mm 85 Sand cast iron S&S as per IS - 3989 86 b) 75mm 87 Sand cast iron S&S as per IS- 3989 88 Providing and fixing plaincast iron S & S sanitary bend. 89 a) 100mm 90 Sand cast iron S&S as per IS - 1729 91 b) 75mm 92 Sand cast iron S&S as per IS - 3989 93 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 94 a) 100x100x100mm 95 b) 75x75x75mm 96 Providing and fixingcast iron terminal guard. 97 a) 100mm 98 b) 75mm 99 Providing & fixingcast iron coller. 100 a)100 mm 101 Sand cast iron S&S as per IS - 3989 102 b)75mm dia. 103 Sand cast iron S&S as per IS - 3989 104 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 105 a) 100mm 106 b) 75mm 107 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 108 a) 100mm inlet & 75mm outlet. 109 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. 110 Providing and fixing PTMT urinal cock of approved quality and colour. 111 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms 112 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 113 15 mm nominal outer dia Pipes 114 20 mm nominal outer dia Pipes 115 25 mm nominal outer dia Pipes 116 32 mm nominal outer dia Pipes 117 Providing and fixing brass stop cock of approved quality. 118 15 mm nominal bore 119 Providing and fixing gun metal gate valve with wheel of approved quality. 120 a) 25mm dia nominal bore 121 b) 32mm dia nominal bore 122 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 123 a) 25mm. Nominal bore 124 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 125 a) 15mm nominal bore 126 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 127 a) 15mm nominal bore 128 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 129 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 130 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 131 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 132 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 133 a) 15mm nominal bore 134 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 135 a) 15mm nominal bore 136 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 137 15mm nominal bore 138 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 139 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 140 25mm nominal bore, weighing not less than 62 gms 141 Cutting holes up to 30x30 cm in walls including making good the same: 142 With common burnt clay F.P.S. (non modular) bricks 143 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 144 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 145 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 146 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 147 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 148 Repair to Plaster and Plinth Protection 149 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 150 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 151 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 152 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 153 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 154 With cement mortar 1:4 (1cement: 4 coarse sand) 155 12mm cement plaster of mix : 156 1:6 (1 cement : 6 course sand) 157 6mm cement plaster to ceiling of mix : 158 1:3 ( 1 cement : 3 fine sand) 159 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 160 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 161 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 162 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 163 Old work (one or more coats) 164 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 165 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 166 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 167 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface 168 Repairs to Door / Windows 169 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 170 Of area 3 sq. metres and below 171 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 172 Of area 3 sq. metres and below 173 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 174 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 175 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 176 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 177 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete 178 Fixed to steel windows by welding 179 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 180 300 mm weighing not less than 200gms. 181 250 mm weighing not less than 150gms. 182 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 183 100X58X1.90 mm 184 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 185 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 186 300 x 10mm 187 200 x 10mm 188 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 189 125 mm 190 Providing and fixing factory made PVC Door shutter made of solid foam PVC profiles of thickness 5 mm and 15 mm at edges integrally extruded for vertical style and horizontal (top / bottom / lock) rails of minimum cross section of 70mm x 28mm, of shape and design as per manufacturers specifications having homogenous fine cellular structure and smooth integral outer skin, inserted with G.l. C section/ rectangular tube profile of minimum 0.30 mm thickness with 120 gsm coating as stiffeners as per manufacturers specifications Mitered cut joints for styles and rails provided with telescopic polymeric L corners are joined together using solvent adhesive and strengthened with fully threaded stainless steel screws (of required size) through reinforcement stiffener with paneling of specified solid foam PVC board / high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded headings of required size using PVC solvent adhesive / cement. The finished door shutter including SS hardware, 1 no. SS sliding door bolt 200 x 10mm, 1 no. SS tower bolt 200 x 10mm and 2 nos. SS handles 125 mm, shall be fixed to frame with 3 Nos. stainless steel hinges of minimum size 100x58x1.9mm and stainless steel screws of required size complete as per direction of the Engineer-in-Charge.(Cost of above hardware is inclusive in rates) 5 mm thick solid foam PVC panel of required size with moulded/extruded beading of appropriate design shape and size as per manufacturers specifications (to secure the panel insert tight in place within the style and rails of the shutter)matching the color &shade of shutter frame - Non decorative type. 191 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 192 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 193 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 194 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 195 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 196 4.0 mm thick glass panes 197 Applying priming coat : 198 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. 199 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 200 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 201 Two or more coats on new work 202 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 203 One or more coats on old work 204 Repairs to Flooring 205 Miscellaneous 206 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 207 In cement mortar 208 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 209 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 210 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 211 Edges of slabs and breaks in floors and walls 212 Under 20 cm wide 213 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 214 Suspended floors, roofs, landings, balconies and access platform. 215 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 216 Thermo-Mechanically Treated bars of grade Fe-500D or more. 217 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 218 Cement mortar 1:6 (1 cement : 6 coarse sand) 219 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 220 Cement mortar 1:4 (1 cement :4 coarse sand 221 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 222 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 223 ELECTRICAL WORK OF SCHOOL BUILDING 224 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 225 Group C 226 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 227 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 228 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 229 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 230 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 231 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 232 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 233 Group C 234 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 235 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 236 2 x 1.5 sq. mm 237 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 238 25 mm 239 32 mm 240 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 241 100 mm X 100 mm X 60 mm deep 242 150 mm X 75 mm X 60 mm deep 243 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 244 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 245 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 246 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 247 Supplying and fixing brass batten/ angle holder including connection etc. as required. 248 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 249 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 250 6 way, Double door 251 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 252 4 way (4 + 12), Double door 253 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 254 Single pole 255 Single pole and neutral 256 Triple pole 257 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 258 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 259 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 260 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Mtr long etc. with charcoal/ coke and salt as required. 261 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 262 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 263 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 264 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 265 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 266 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover 3on the fan box etc. as required. 267 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 268 Upto 450 mm sweep 269 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 270 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 271 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 272 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 273 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 274 Supplyof AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting FRLSame and other accessories etc.complete 275 450 mm sweep 1400 rpm 276 LIGHTNING CONDUCTOR 277 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 278 Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required. 279 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 280 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 281 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 282 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 283 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 284 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set 285 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 286 BILL OF QUANTITY FOR BOYS DINNING HALL 287 Repairs to Roof 288 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: 289 Asbestos Cement sheet 290 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m* 291 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m* 292 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 293 Repair to Plaster and Plinth Protection 294 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 295 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 296 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 297 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 298 With cement mortar 1:4 (1cement: 4 coarse sand) 299 12mm cement plaster of mix : 300 1:6 (1 cement : 6 course sand) 301 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 302 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 303 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 304 Old work (one or more coats) 305 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 306 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 307 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 308 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 309 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 310 Repairs to Door / Windows 311 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 312 Of area 3 sq. metres and below 313 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 314 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 315 Renewal of old putty of glass panes (length) 316 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 317 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 318 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 319 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 320 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 321 300 mm weighing not less than 200gms. 322 250 mm weighing not less than 150gms. 323 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 324 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 325 300 x 10mm 326 150 x 10mm 327 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 328 With 12 mm mild steel U beading 329 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 330 125 mm 331 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 332 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 333 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 334 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 335 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 336 4.0 mm thick glass panes 337 Applying priming coat : 338 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 339 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 340 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 341 Two or more coats on new work 342 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 343 One or more coats on old work 344 Flooring 345 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 346 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 347 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 348 25 mm thick 349 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 350 Miscellaneous 351 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 352 In cement mortar 353 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 354 Cement mortar 1:6 (1 cement : 6 coarse sand) 355 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 356 75 to 80 mm dia pipe 357 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 358 110 mm diameter 359 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 360 a) Coupler 361 110 mm 362 b) Bend 87.5° 363 110 mm bend 364 KITCHEN & DINNING 365 Structural Repair & Retrofitting 366 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 367 50mm average thickness 368 25 mm average thickness 369 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 370 Bars upto 12 mm diameter 371 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 372 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 373 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 374 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 375 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 376 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 377 Repairs to Roof 378 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 379 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 380 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 381 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: 382 Asbestos Cement sheet 383 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m* 384 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m* 385 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 386 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 387 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 388 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes. 389 Repair to Toilets + Plumbing Works 390 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 391 For thickness of tiles 10 mm to 25 mm 392 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 393 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 600 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 394 PLUMBING WORK 395 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 396 75 to 80 mm dia pipe 397 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 398 15 mm to 40 mm nominal bore 399 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 400 Up to 150 mm diameter 401 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 402 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 403 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 404 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 405 Rectangular manhole 90x80 cm and 45 cm deep 406 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 407 110 mm diameter 408 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 409 a) Coupler 410 110 mm 411 b) Bend 87.5° 412 110 mm bend 413 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 414 75 mm diameter pipes 415 100 mm diameter pipes 416 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 417 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 418 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 419 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 420 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 421 a) 32mm dia (for wash basin) 422 b) 40mm dia (for sink and urinal) 423 Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe. 424 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 425 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 426 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 427 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 428 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 429 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 430 P-Trap type Floor Trap 110 x 75 mm 431 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 432 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 433 Providing and fixing 100 mm sand cast Iron grating for gully trap. 434 Providing & fixing soil, waste and vent pipes. 435 a) 100mm dia centrifugally cast iron S & S pipe. 436 b)75mm dia centrifugally cast iron S & S pipe. 437 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 438 a) for 100mm dia pipe. 439 b) for 75mm dia pipe. 440 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 441 a) 100mm 442 Sand cast iron S&S as per IS - 3989 443 b) 75mm 444 Sand cast iron S&S as per IS- 3989 445 Providing and fixing plaincast iron S & S sanitary bend. 446 a) 100mm 447 Sand cast iron S&S as per IS - 1729 448 b) 75mm 449 Sand cast iron S&S as per IS - 3989 450 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 451 a) 100x100x100mm 452 b) 75x75x75mm 453 Providing and fixingcast iron terminal guard. 454 a) 100mm 455 b) 75mm 456 Providing & fixingcast iron coller. 457 a)100 mm 458 Sand cast iron S&S as per IS - 3989 459 b)75mm dia. 460 Sand cast iron S&S as per IS - 3989 461 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 462 a) 100mm 463 b) 75mm 464 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 465 a) 100mm inlet & 75mm outlet. 466 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. 467 Providing and fixing PTMT urinal cock of approved quality and colour. 468 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms 469 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 470 15 mm nominal outer dia Pipes 471 20 mm nominal outer dia Pipes 472 25 mm nominal outer dia Pipes 473 32 mm nominal outer dia Pipes 474 Providing and fixing brass stop cock of approved quality. 475 15 mm nominal bore 476 Providing and fixing gun metal gate valve with wheel of approved quality. 477 a) 25mm dia nominal bore 478 b) 32mm dia nominal bore 479 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 480 a) 25mm. Nominal bore 481 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 482 a) 15mm nominal bore 483 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 484 a) 15mm nominal bore 485 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 486 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 487 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 488 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 489 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 490 a) 15mm nominal bore 491 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 492 a) 15mm nominal bore 493 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 494 15mm nominal bore 495 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 496 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 497 25mm nominal bore, weighing not less than 62 gms 498 Cutting holes up to 30x30 cm in walls including making good the same: 499 With common burnt clay F.P.S. (non modular) bricks 500 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 501 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 502 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 503 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 504 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 505 Repair to Plaster and Plinth Protection 506 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 507 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 508 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 509 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 510 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 511 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 512 With cement mortar 1:4 (1cement: 4 coarse sand) 513 12mm cement plaster of mix : 514 1:6 (1 cement : 6 course sand) 515 6mm cement plaster to ceiling of mix : 516 1:3 ( 1 cement : 3 fine sand) 517 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 518 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 519 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 520 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 521 Old work (one or more coats) 522 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 523 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 524 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 525 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 526 Repairs to Door / Windows 527 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 528 Of area 3 sq. metres and below 529 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 530 Of area 3 sq. metres and below 531 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 532 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 533 Renewal of old putty of glass panes (length) 534 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 535 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 536 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 537 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 538 300 mm weighing not less than 200gms. 539 250 mm weighing not less than 150gms. 540 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 541 100X58X1.90 mm 542 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 543 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 544 300 x 10mm 545 200 x 10mm 546 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 547 125 mm 548 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 549 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) /Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 550 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 551 With 12 mm mild steel U beading 552 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 553 Using flats 30x6mm for diagonal braces and central cross piece 554 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 555 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 556 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size). 557 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 558 4.0 mm thick glass panes 559 Applying priming coat : 560 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 561 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 562 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 563 Two or more coats on new work 564 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 565 One or more coats on old work 566 Miscellaneous 567 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 568 In cement mortar 569 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 570 Cement mortar 1:6 (1 cement : 6 coarse sand) 571 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing andreinforcement : 572 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 573 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 574 Edges of slabs and breaks in floors and walls 575 Under 20 cm wide 576 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 577 Suspended floors, roofs, landings, balconies and access platform. 578 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 579 Thermo-Mechanically Treated bars of grade Fe-500D or more. 580 ELECTRICAL WORK OF KITCHEN & DINNING 581 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 582 Group C 583 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 584 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 585 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 586 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 587 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 588 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 589 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 590 Group C 591 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 592 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 593 2 x 1.5 sq. mm 594 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 595 25 mm 596 32 mm 597 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 598 100 mm X 100 mm X 60 mm deep 599 150 mm X 75 mm X 60 mm deep 600 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 601 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 602 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 603 Supplying and fixing brass batten/ angle holder including connection etc. as required. 604 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 605 4 way (4 + 12), Double door 606 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 607 Single pole 608 Single pole and neutral 609 Triple pole 610 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 611 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 612 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 613 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Mtr long etc. with charcoal/ coke and salt as required. 614 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 615 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 616 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 617 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 618 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 619 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 620 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 621 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 622 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 623 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 624 Supplyof AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting FRLSame and other accessories etc.complete 625 450 mm sweep 1400 rpm 626 COST OF MP HALL 627 Structural Repair & Retrofitting 628 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 629 50 mm average thickness 630 25 mm average thickness 631 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 632 Bars upto 12 mm diameter 633 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 634 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 635 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 636 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 637 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 638 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 639 Repairs to Roof 640 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 641 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 642 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 643 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: 644 Asbestos Cement sheet 645 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m* 646 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m* 647 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 648 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 649 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 650 Repair to Plaster and Plinth Protection 651 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 652 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 653 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 654 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 655 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 656 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 657 With cement mortar 1:4 (1cement: 4 coarse sand) 658 12mm cement plaster of mix : 659 1:6 (1 cement : 6 course sand) 660 6mm cement plaster to ceiling of mix : 661 1:3 ( 1 cement : 3 fine sand) 662 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 663 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 664 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 665 Old work (one or more coats) 666 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 667 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 668 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 669 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 670 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 671 Repairs to Door / Windows 672 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 673 Of area 3 sq. metres and below 674 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 675 Of area 3 sq. metres and below 676 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 677 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 678 Renewal of old putty of glass panes (length) 679 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 680 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 681 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 682 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 683 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 684 300 mm weighing not less than 200gms. 685 250 mm weighing not less than 150gms. 686 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 687 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 688 300 x 10mm 689 150 x 10mm 690 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 691 With 12 mm mild steel U beading 692 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 693 125 mm 694 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 695 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 696 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 697 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 698 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 699 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 700 4.0 mm thick glass panes 701 Applying priming coat : 702 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 703 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 704 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 705 Two or more coats on new work 706 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 707 One or more coats on old work 708 Flooring 709 Miscellaneous 710 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 711 In cement mortar 712 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 713 Cement mortar 1:6 (1 cement : 6 coarse sand) 714 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 715 Cement mortar 1:4 (1 cement :4 coarse sand 716 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 717 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 718 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 719 75 to 80 mm dia pipe 720 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 721 110 mm diameter 722 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 723 a) Coupler 724 110 mm 725 b) Bend 87.5° 726 110 mm bend 727 ELECTRICAL WORK 728 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 729 Group C 730 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 731 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 732 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 733 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 734 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 735 2 x 1.5 sq. mm 736 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 737 25 mm 738 32 mm 739 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 740 100 mm X 100 mm X 60 mm deep 741 150 mm X 75 mm X 60 mm deep 742 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 743 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 744 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 745 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 746 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 747 6 way, Double door 748 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 749 4 way (4 + 12), Double door 750 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 751 Single pole 752 Single pole and neutral 753 Triple pole 754 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 755 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 756 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 757 Upto 450 mm sweep 758 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 759 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 760 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 761 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 762 Supply of 30W LED recess mounted fixtureMAKE-PHILIPS CAT NO.RC380B LED30S-6500 L60W60 PSD OD S1 or equivalent. 763 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 764 Supplyof AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting FRLSame and other accessories etc.complete 765 450 mm sweep 1400 rpm 766 BOYSDORMITORY (G) FOR 72 STUDENTS 767 Structural Repair & Retrofitting 768 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 769 50 mm average thickness 770 25 mm average thickness 771 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 772 Bars upto 12 mm diameter 773 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 774 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 775 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 776 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 777 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 778 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 779 Expansion Joint Treatment 780 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to its components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063). 781 Floor Joint of 100 mm gap 782 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints Systemsuitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 783 Wall Joint of 100 mm gap 784 Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 785 Roof Joint of 100 mm gap 786 Repairs to Roof 787 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 788 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 789 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 790 Repair to Toilets 791 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 792 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 793 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 794 For thickness of tiles 10 mm to 25 mm 795 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 600 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 796 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 797 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 798 Providing and filling of cinder in sunken portions. 799 Repair to Plaster and Plinth Protection 800 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 801 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 802 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 803 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 804 With cement mortar 1:4 (1cement: 4 coarse sand) 805 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 806 15mm cement plaster on rough side of single or half brick wall of mix 807 1:6 (1 cement : 6 course sand) 808 6mm cement plaster to ceiling of mix : 809 1:3 ( 1 cement : 3 fine sand) 810 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 811 Two coats 812 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 813 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 814 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 815 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). 816 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 817 15 mm wide and 15 mm deep groove 818 Repairs to Door / Windows 819 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 820 Of area 3 sq. metres and below 821 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 822 Of area 3 sq. metres and below 823 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 824 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 825 Renewal of old putty of glass panes (length) 826 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 827 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 828 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 829 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete .Fixed to steel windows by welding 830 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 831 300 mm weighing not less than 200gms. 832 250 mm weighing not less than 150gms. 833 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 834 100X58X1.90 mm 835 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 836 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 837 300 x 10mm 838 150 x 10mm 839 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 840 125 mm 841 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 842 Twin rubber stopper 843 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 844 Providing and fixing to existing door frames. 845 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 846 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4mm in both directions for doors, windows and clerestory windows with necessary screws : 847 35 mm thick shutters.With ISI marked stainless steel butt hinges of required size. Kiln seasoned and chemically treated hollock wood. 848 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 849 With 12 mm mild steel U beading 850 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 851 Using flats 30x6mm for diagonal braces and central cross piece 852 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 853 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 854 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer 855 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 856 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 857 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 858 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 859 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 860 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 861 4.0 mm thick glass panes 862 Applying priming coat : 863 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 864 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 865 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 866 Two or more coats on new work 867 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 868 One or more coats on old work 869 Repairs to Flooring 870 Miscellaneous 871 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 872 In cement mortar 873 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 874 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 875 Cement mortar 1:6 (1 cement : 6 coarse sand) 876 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 877 Cement mortar 1:4 (1 cement :4 coarse sand 878 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 879 PLUMBING WORK OF BOYSDORMITORY (G) FOR 72 STUDENTS 880 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 881 75 to 80 mm dia pipe 882 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 883 15 mm to 40 mm nominal bore 884 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 885 Up to 150 mm diameter 886 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 887 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 888 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 889 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 890 Up to 150 mm diameter 891 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 892 Rectangular manhole 90x80 cm and 45 cm deep 893 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 894 110 mm diameter 895 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 896 a) Coupler 897 110 mm 898 b) Bend 87.5° 899 110 mm bend 900 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 901 75 mm diameter pipes 902 100 mm diameter pipes 903 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 904 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 905 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 906 W.C. pan with ISI marked white solid plastic seat and lid 907 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 908 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 909 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 910 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 911 a) 32mm dia (for wash basin) 912 b) 40mm dia (for sink and urinal) 913 Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories. 914 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 915 Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe. 916 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 917 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 918 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 919 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 920 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 921 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 922 P-Trap type Floor Trap 110 x 75 mm 923 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 924 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 925 Providing and fixing 100 mm sand cast Iron grating for gully trap. 926 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 927 Providing and fixing toilet paper holder : 928 Vitreous china 929 Providing & fixing soil, waste and vent pipes. 930 a) 100mm dia centrifugally cast iron S & S pipe. 931 b)75mm dia centrifugally cast iron S & S pipe. 932 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 933 a) for 100mm dia pipe. 934 b) for 75mm dia pipe. 935 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 936 a) 100mm 937 Sand cast iron S&S as per IS - 3989 938 b) 75mm 939 Sand cast iron S&S as per IS- 3989 940 Providing and fixing plaincast iron S & S sanitary bend. 941 a) 100mm 942 Sand cast iron S&S as per IS - 1729 943 b) 75mm 944 Sand cast iron S&S as per IS - 3989 945 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 946 a) 100x100x100mm 947 b) 75x75x75mm 948 Providing and fixingcast iron terminal guard. 949 a) 100mm 950 b) 75mm 951 Providing & fixingcast iron coller. 952 a)100 mm 953 Sand cast iron S&S as per IS - 3989 954 b)75mm dia. 955 Sand cast iron S&S as per IS - 3989 956 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 957 a) 100mm 958 b) 75mm 959 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 960 a) 100mm inlet & 75mm outlet. 961 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. 962 Providing and fixing PTMT urinal cock of approved quality and colour. 963 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms 964 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 965 15 mm nominal outer dia Pipes 966 20 mm nominal outer dia Pipes 967 25 mm nominal outer dia Pipes 968 32 mm nominal outer dia Pipes 969 Providing and fixing brass stop cock of approved quality. 970 15 mm nominal bore 971 Providing and fixing gun metal gate valve with wheel of approved quality. 972 a) 25mm dia nominal bore 973 b) 32mm dia nominal bore 974 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 975 a) 25mm. Nominal bore 976 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 977 a) 15mm nominal bore 978 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 979 a) 15mm nominal bore 980 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 981 a) 15mm nominal bore 982 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 983 a) 15mm nominal bore 984 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 985 15mm nominal bore 986 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 987 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 988 25mm nominal bore, weighing not less than 62 gms 989 Cutting holes up to 30x30 cm in walls including making good the same: 990 With common burnt clay F.P.S. (non modular) bricks 991 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 992 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 993 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 994 ELECTRICAL WORK OF BOYSDORMITORY (G) FOR 72 STUDENTS 995 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 996 Group B 997 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 998 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 999 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 1000 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1001 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 1002 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 1003 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 1004 Group B 1005 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 1006 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1007 2 x 1.5 sq. mm 1008 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1009 25 mm 1010 32 mm 1011 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1012 100 mm X 100 mm X 60 mm deep 1013 150 mm X 75 mm X 60 mm deep 1014 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 1015 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 1016 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 1017 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 1018 Supplying and fixing brass batten/ angle holder including connection etc. as required. 1019 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 1020 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1021 6 way, Double door 1022 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1023 4 way (4 + 12), Double door 1024 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1025 Single pole 1026 Single pole and neutral 1027 Triple pole 1028 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 1029 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 1030 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 1031 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 1032 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 1033 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 1034 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 1035 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1036 Girls Dormitories(CPWD Type) 1 Block 1037 Structural Repair & Retrofitting 1038 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 1039 50mm average thickness 1040 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 1041 Bars upto 12 mm diameter 1042 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 1043 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 1044 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 1045 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 1046 Repairs to Roof 1047 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 1048 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 1049 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 1050 Repair to Toilets 1051 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1052 For thickness of tiles 10 mm to 25 mm 1053 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 1054 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 1055 Repair to Plaster and Plinth Protection 1056 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. 1057 Two or more coats on new work 1058 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 1059 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1060 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 1061 15mm cement plaster on rough side of single or half brick wall of mix 1062 1:6 (1 cement : 6 course sand) 1063 6mm cement plaster to ceiling of mix : 1064 1:3 ( 1 cement : 3 fine sand) 1065 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 1066 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 1067 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 1068 Old work (one or more coats) 1069 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1070 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). 1071 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 1072 15 mm wide and 15 mm deep groove 1073 Repairs to Door / Windows 1074 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1075 Of area 3 sq. metres and below 1076 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 1077 Of area 3 sq. metres and below 1078 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 1079 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 1080 Renewal of old putty of glass panes (length) 1081 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete .Fixed to steel windows by welding 1082 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 1083 250 mm weighing not less than 150gms. 1084 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 1085 100X58X1.90 mm 1086 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 1087 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 1088 300 x 10mm 1089 150 x 10mm 1090 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 1091 125 mm 1092 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1093 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 1094 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 1095 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 1096 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick. 1097 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 1098 With 12 mm mild steel U beading 1099 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 1100 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 1101 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer 1102 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 1103 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 1104 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1105 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 1106 4.0 mm thick glass panes 1107 Applying priming coat : 1108 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. 1109 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 1110 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1111 Two or more coats on new work 1112 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1113 One or more coats on old work 1114 Miscellaneous 1115 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 1116 In cement mortar 1117 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1118 Cement mortar 1:6 (1 cement : 6 coarse sand) 1119 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 1120 Cement mortar 1:4 (1 cement :4 coarse sand 1121 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 1122 PLUMBING WORK OF GIRLSDORMITORY (G) FOR 48 STUDENTS 1123 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 1124 75 to 80 mm dia pipe 1125 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 1126 15 mm to 40 mm nominal bore 1127 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 1128 Up to 150 mm diameter 1129 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 1130 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 1131 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 1132 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 1133 Up to 150 mm diameter 1134 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 1135 Rectangular manhole 90x80 cm and 45 cm deep 1136 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1137 110 mm diameter 1138 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1139 a) Coupler 1140 110 mm 1141 b) Bend 87.5° 1142 110 mm bend 1143 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 1144 75 mm diameter pipes 1145 100 mm diameter pipes 1146 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1147 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1148 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 1149 W.C. pan with ISI marked white solid plastic seat and lid 1150 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 1151 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 1152 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 1153 a) 32mm dia (for wash basin) 1154 b) 40mm dia (for sink and urinal) 1155 Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories. 1156 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 1157 Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe. 1158 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 1159 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1160 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1161 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 1162 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 1163 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 1164 P-Trap type Floor Trap 110 x 75 mm 1165 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 1166 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 1167 Providing and fixing 100 mm sand cast Iron grating for gully trap. 1168 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 1169 Providing and fixing toilet paper holder : 1170 Vitreous china 1171 Providing & fixing soil, waste and vent pipes. 1172 a) 100mm dia centrifugally cast iron S & S pipe. 1173 b)75mm dia centrifugally cast iron S & S pipe. 1174 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 1175 a) for 100mm dia pipe. 1176 b) for 75mm dia pipe. 1177 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 1178 a) 100mm 1179 Sand cast iron S&S as per IS - 3989 1180 b) 75mm 1181 Sand cast iron S&S as per IS- 3989 1182 Providing and fixing plaincast iron S & S sanitary bend. 1183 a) 100mm 1184 Sand cast iron S&S as per IS - 1729 1185 b) 75mm 1186 Sand cast iron S&S as per IS - 3989 1187 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 1188 a) 100x100x100mm 1189 b) 75x75x75mm 1190 Providing and fixingcast iron terminal guard. 1191 a) 100mm 1192 b) 75mm 1193 Providing & fixingcast iron coller. 1194 a)100 mm 1195 Sand cast iron S&S as per IS - 3989 1196 b)75mm dia. 1197 Sand cast iron S&S as per IS - 3989 1198 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 1199 a) 100mm 1200 b) 75mm 1201 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 1202 a) 100mm inlet & 75mm outlet. 1203 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 1204 15 mm nominal outer dia Pipes 1205 20 mm nominal outer dia Pipes 1206 25 mm nominal outer dia Pipes 1207 32 mm nominal outer dia Pipes 1208 Providing and fixing brass stop cock of approved quality. 1209 15 mm nominal bore 1210 Providing and fixing gun metal gate valve with wheel of approved quality. 1211 a) 25mm dia nominal bore 1212 b) 32mm dia nominal bore 1213 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 1214 a) 25mm. Nominal bore 1215 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 1216 a) 15mm nominal bore 1217 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 1218 a) 15mm nominal bore 1219 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 1220 a) 15mm nominal bore 1221 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1222 a) 15mm nominal bore 1223 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1224 15mm nominal bore 1225 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 1226 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 1227 25mm nominal bore, weighing not less than 62 gms 1228 Cutting holes up to 30x30 cm in walls including making good the same: 1229 With common burnt clay F.P.S. (non modular) bricks 1230 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 1231 ELECTRICAL WORK OF GIRLSDORMITORY (G) FOR 48 STUDENTS 1232 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 1233 Group B 1234 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1235 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1236 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 1237 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1238 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 1239 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 1240 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 1241 Group B 1242 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 1243 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1244 2 x 1.5 sq. mm 1245 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1246 25 mm 1247 32 mm 1248 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1249 100 mm X 100 mm X 60 mm deep 1250 150 mm X 75 mm X 60 mm deep 1251 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 1252 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 1253 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 1254 Supplying and fixing brass batten/ angle holder including connection etc. as required. 1255 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 1256 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1257 4 way (4 + 12), Double door 1258 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1259 Single pole 1260 Single pole and neutral 1261 Triple pole 1262 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 1263 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 1264 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 1265 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 1266 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 1267 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 1268 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 1269 Staff Qtrs Type-III . 1270 Structural Repair & Retrofitting 1271 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 1272 50 mm average thickness 1273 25 mm average thickness 1274 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 1275 Bars upto 12 mm diameter 1276 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 1277 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 1278 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 1279 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 1280 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 1281 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 1282 Repairs to Roof 1283 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 1284 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 1285 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 1286 Repair to Toilets 1287 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1288 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 1289 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 1290 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 1291 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1292 Providing and filling of cinder in sunken portions. 1293 Repair to Plaster and Plinth Protection 1294 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1295 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 1296 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 1297 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1298 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 1299 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 1300 With cement mortar 1:4 (1cement: 4 coarse sand) 1301 12mm cement plaster of mix : 1302 1:6 (1 cement : 6 course sand) 1303 6mm cement plaster to ceiling of mix : 1304 1:3 ( 1 cement : 3 fine sand) 1305 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 1306 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 1307 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 1308 Old work (one or more coats) 1309 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1310 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 1311 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 1312 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 1313 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 1314 Repairs to Door / Windows 1315 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1316 Of area 3 sq. metres and below 1317 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 1318 Of area 3 sq. metres and below 1319 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 1320 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 1321 Renewal of old putty of glass panes (length) 1322 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1323 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 1324 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 1325 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 1326 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 1327 300 mm weighing not less than 200gms. 1328 250 mm weighing not less than 150gms. 1329 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 1330 100X58X1.90 mm 1331 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 1332 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 1333 300 x 10mm 1334 150 x 10mm 1335 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 1336 Providing and fixing to existing door frames. 1337 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 1338 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws. 1339 30 mm thick shutterswith ISI marked M.S. butt hinges with necessary screws 1340 With ISI marked stainless steel butt hinges of required size 1341 Kiln seasoned and chemically treated hollock wood 1342 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 1343 With 12 mm mild steel U beading 1344 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 1345 125 mm 1346 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1347 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 1348 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 1349 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 1350 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1351 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 1352 4.0 mm thick glass panes 1353 Applying priming coat : 1354 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 1355 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 1356 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1357 Two or more coats on new work 1358 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1359 One or more coats on old work 1360 Miscellaneous 1361 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1362 Cement mortar 1:6 (1 cement : 6 coarse sand) 1363 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 1364 Cement mortar 1:4 (1 cement :4 coarse sand 1365 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 1366 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 1367 PLUMBING WORK OF TYPE-III (G+1) 1368 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 1369 75 to 80 mm dia pipe 1370 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 1371 15 mm to 40 mm nominal bore 1372 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 1373 Up to 150 mm diameter 1374 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 1375 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 1376 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 1377 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 1378 Up to 150 mm diameter 1379 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 1380 Rectangular manhole 90x80 cm and 45 cm deep 1381 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1382 110 mm diameter 1383 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1384 a) Coupler 1385 110 mm 1386 b) Bend 87.5° 1387 110 mm bend 1388 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 1389 75 mm diameter pipes 1390 100 mm diameter pipes 1391 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1392 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1393 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 1394 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 1395 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : 1396 Kitchen sink without drain board 1397 610x510 mm bowl depth 200 mm 1398 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 1399 a) 32mm dia (for wash basin) 1400 b) 40mm dia (for sink and urinal) 1401 Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I allrespect 1402 Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets 1403 Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets 1404 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 1405 Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms 1406 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. 1407 The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 1408 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1409 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1410 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 1411 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 1412 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 1413 P-Trap type Floor Trap 110 x 75 mm 1414 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 1415 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 1416 Providing and fixing 100 mm sand cast Iron grating for gully trap. 1417 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 1418 Providing & fixing soil, waste and vent pipes. 1419 a) 100mm dia centrifugally cast iron S & S pipe. 1420 b)75mm dia centrifugally cast iron S & S pipe. 1421 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 1422 a) for 100mm dia pipe. 1423 b) for 75mm dia pipe. 1424 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 1425 a) 100mm 1426 Sand cast iron S&S as per IS - 3989 1427 b) 75mm 1428 Sand cast iron S&S as per IS- 3989 1429 Providing and fixing plaincast iron S & S sanitary bend. 1430 a) 100mm 1431 Sand cast iron S&S as per IS - 1729 1432 b) 75mm 1433 Sand cast iron S&S as per IS - 3989 1434 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 1435 a) 100x100x100mm 1436 b) 75x75x75mm 1437 Providing and fixingcast iron terminal guard. 1438 a) 100mm 1439 b) 75mm 1440 Providing & fixingcast iron coller. 1441 a)100 mm 1442 Sand cast iron S&S as per IS - 3989 1443 b)75mm dia. 1444 Sand cast iron S&S as per IS - 3989 1445 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 1446 a) 100mm 1447 b) 75mm 1448 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 1449 a) 100mm inlet & 75mm outlet. 1450 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 1451 15 mm nominal outer dia Pipes 1452 20 mm nominal outer dia Pipes 1453 25 mm nominal outer dia Pipes 1454 32 mm nominal outer dia Pipes 1455 Providing and fixing brass stop cock of approved quality. 1456 15 mm nominal bore 1457 Providing and fixing gun metal gate valve with wheel of approved quality. 1458 a) 25mm dia nominal bore 1459 b) 32mm dia nominal bore 1460 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 1461 a) 25mm. Nominal bore 1462 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 1463 a) 15mm nominal bore 1464 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 1465 a) 15mm nominal bore 1466 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 1467 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 1468 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 1469 With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 1470 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1471 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 1472 a) 15mm nominal bore 1473 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1474 a) 15mm nominal bore 1475 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 1476 a) 15mm nominal bore 1477 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 1478 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 1479 25mm nominal bore, weighing not less than 62 gms 1480 Cutting holes up to 30x30 cm in walls including making good the same: 1481 With common burnt clay F.P.S. (non modular) bricks 1482 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 1483 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1484 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 1485 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 1486 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 1487 ELECTRICAL WORK OF TYPE-III (G+1) 1488 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 1489 Group B 1490 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1491 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1492 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 1493 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1494 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 1495 xxxx 1496 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 1497 Group B 1498 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 1499 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1500 2 x 1.5 sq. mm 1501 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1502 25 mm 1503 32 mm 1504 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1505 100 mm X 100 mm X 60 mm deep 1506 150 mm X 75 mm X 60 mm deep 1507 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 1508 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 1509 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 1510 S/F light plug point Modular type accessories :- 1511 Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providingandfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required. 1512 S/F power plug point modular type accessories :- 1513 Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required. 1514 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 1515 Supplying and fixing brass batten/ angle holder including connection etc. as required. 1516 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 1517 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1518 6 way, Double door 1519 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1520 4 way (4 + 12), Double door 1521 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1522 Single pole 1523 Single pole and neutral 1524 Triple pole 1525 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 1526 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 1527 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 1528 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 1529 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 1530 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 1531 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 1532 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 1533 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 1534 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 1535 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 1536 Staff Qtrs Type-III . 1537 Structural Repair & Retrofitting 1538 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 1539 50 mm average thickness 1540 25 mm average thickness 1541 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 1542 Bars upto 12 mm diameter 1543 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 1544 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 1545 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 1546 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 1547 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 1548 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 1549 Repairs to Roof 1550 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 1551 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 1552 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 1553 Repair to Toilets 1554 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1555 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 1556 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 1557 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 1558 Repair to Plaster and Plinth Protection 1559 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1560 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 1561 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 1562 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1563 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 1564 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 1565 With cement mortar 1:4 (1cement: 4 coarse sand) 1566 12mm cement plaster of mix : 1567 1:6 (1 cement : 6 course sand) 1568 6mm cement plaster to ceiling of mix : 1569 1:3 ( 1 cement : 3 fine sand) 1570 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 1571 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 1572 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 1573 Old work (one or more coats) 1574 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1575 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 1576 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 1577 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 1578 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 1579 Repairs to Door / Windows 1580 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1581 Of area 3 sq. metres and below 1582 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 1583 Of area 3 sq. metres and below 1584 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 1585 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 1586 Renewal of old putty of glass panes (length) 1587 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1588 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 1589 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 1590 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 1591 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 1592 300 mm weighing not less than 200gms. 1593 250 mm weighing not less than 150gms. 1594 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 1595 100X58X1.90 mm 1596 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 1597 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 1598 300 x 10mm 1599 150 x 10mm 1600 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 1601 Providing and fixing to existing door frames. 1602 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 1603 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws. 1604 30 mm thick shutterswith ISI marked M.S. butt hinges with necessary screws 1605 With ISI marked stainless steel butt hinges of required size 1606 Kiln seasoned and chemically treated hollock wood 1607 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 1608 With 12 mm mild steel U beading 1609 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 1610 125 mm 1611 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1612 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 1613 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 1614 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 1615 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1616 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 1617 4.0 mm thick glass panes 1618 Applying priming coat : 1619 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 1620 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 1621 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1622 Two or more coats on new work 1623 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1624 One or more coats on old work 1625 Flooring 1626 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1627 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 1628 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 1629 25 mm thick 1630 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 1631 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.size of tile 600x 600 mm 1632 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.size of tile 600x 600 mm 1633 Miscellaneous 1634 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1635 Cement mortar 1:6 (1 cement : 6 coarse sand) 1636 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 1637 Cement mortar 1:4 (1 cement :4 coarse sand 1638 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 1639 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 1640 PLUMBING WORK OF TYPE-III (G) 1641 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 1642 75 to 80 mm dia pipe 1643 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 1644 15 mm to 40 mm nominal bore 1645 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 1646 Up to 150 mm diameter 1647 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 1648 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 1649 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 1650 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 1651 Up to 150 mm diameter 1652 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 1653 Rectangular manhole 90x80 cm and 45 cm deep 1654 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1655 110 mm diameter 1656 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1657 a) Coupler 1658 110 mm 1659 b) Bend 87.5° 1660 110 mm bend 1661 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 1662 75 mm diameter pipes 1663 100 mm diameter pipes 1664 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1665 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1666 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 1667 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 1668 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : 1669 Kitchen sink without drain board 1670 610x510 mm bowl depth 200 mm 1671 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 1672 a) 32mm dia (for wash basin) 1673 b) 40mm dia (for sink and urinal) 1674 Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I allrespect 1675 Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets 1676 Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets 1677 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 1678 Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms 1679 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. 1680 The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 1681 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1682 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1683 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 1684 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 1685 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 1686 P-Trap type Floor Trap 110 x 75 mm 1687 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 1688 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 1689 Providing and fixing 100 mm sand cast Iron grating for gully trap. 1690 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 1691 Providing & fixing soil, waste and vent pipes. 1692 a) 100mm dia centrifugally cast iron S & S pipe. 1693 b)75mm dia centrifugally cast iron S & S pipe. 1694 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 1695 a) for 100mm dia pipe. 1696 b) for 75mm dia pipe. 1697 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 1698 a) 100mm 1699 Sand cast iron S&S as per IS - 3989 1700 b) 75mm 1701 Sand cast iron S&S as per IS- 3989 1702 Providing and fixing plaincast iron S & S sanitary bend. 1703 a) 100mm 1704 Sand cast iron S&S as per IS - 1729 1705 b) 75mm 1706 Sand cast iron S&S as per IS - 3989 1707 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 1708 a) 100x100x100mm 1709 b) 75x75x75mm 1710 Providing and fixingcast iron terminal guard. 1711 a) 100mm 1712 b) 75mm 1713 Providing & fixingcast iron coller. 1714 a)100 mm 1715 Sand cast iron S&S as per IS - 3989 1716 b)75mm dia. 1717 Sand cast iron S&S as per IS - 3989 1718 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 1719 a) 100mm 1720 b) 75mm 1721 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 1722 a) 100mm inlet & 75mm outlet. 1723 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 1724 15 mm nominal outer dia Pipes 1725 20 mm nominal outer dia Pipes 1726 25 mm nominal outer dia Pipes 1727 32 mm nominal outer dia Pipes 1728 Providing and fixing brass stop cock of approved quality. 1729 15 mm nominal bore 1730 Providing and fixing gun metal gate valve with wheel of approved quality. 1731 a) 25mm dia nominal bore 1732 b) 32mm dia nominal bore 1733 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 1734 a) 25mm. Nominal bore 1735 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 1736 a) 15mm nominal bore 1737 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 1738 a) 15mm nominal bore 1739 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 1740 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 1741 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 1742 With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 1743 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1744 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 1745 a) 15mm nominal bore 1746 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1747 a) 15mm nominal bore 1748 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 1749 a) 15mm nominal bore 1750 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 1751 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 1752 25mm nominal bore, weighing not less than 62 gms 1753 Cutting holes up to 30x30 cm in walls including making good the same: 1754 With common burnt clay F.P.S. (non modular) bricks 1755 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 1756 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1757 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 1758 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 1759 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 1760 ELECTRICAL WORK OF TYPE-III (G) 1761 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 1762 Group B 1763 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1764 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1765 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 1766 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1767 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 1768 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 1769 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 1770 Group B 1771 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 1772 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1773 2 x 1.5 sq. mm 1774 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1775 25 mm 1776 32 mm 1777 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1778 100 mm X 100 mm X 60 mm deep 1779 150 mm X 75 mm X 60 mm deep 1780 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 1781 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 1782 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 1783 S/F light plug point Modular type accessories :- 1784 Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providingandfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required. 1785 S/F power plug point modular type accessories :- 1786 Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required. 1787 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 1788 Supplying and fixing brass batten/ angle holder including connection etc. as required. 1789 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 1790 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1791 6 way, Double door 1792 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1793 4 way (4 + 12), Double door 1794 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1795 Single pole 1796 Single pole and neutral 1797 Triple pole 1798 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 1799 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 1800 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 1801 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 1802 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 1803 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 1804 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 1805 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 1806 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 1807 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 1808 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 1809 Type-II Staff Qtrs. 1810 Structural Repair & Retrofitting 1811 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 1812 25 mm average thickness 1813 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 1814 Bars upto 12 mm diameter 1815 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 1816 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 1817 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 1818 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 1819 Repairs to Roof 1820 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 1821 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 1822 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 1823 Repair to Toilets 1824 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1825 For thickness of tiles 10 mm to 25 mm 1826 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 1827 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 1828 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1829 Providing and filling of cinder in sunken portions. 1830 Repair to Plaster and Plinth Protection 1831 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 1832 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 1833 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 1834 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1835 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 1836 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 1837 With cement mortar 1:4 (1cement: 4 coarse sand) 1838 15mm cement plaster of mix : 1839 1:6 (1 cement : 6 course sand) 1840 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 1841 Raised and cut pointing 1842 6mm cement plaster to ceiling of mix : 1843 1:3 ( 1 cement : 3 fine sand) 1844 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 1845 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 1846 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 1847 Old work (one or more coats) 1848 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1849 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 1850 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 1851 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 1852 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 1853 Repairs to Door / Windows 1854 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1855 Of area 3 sq. metres and below 1856 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 1857 Of area 3 sq. metres and below 1858 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 1859 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 1860 Renewal of old putty of glass panes (length) 1861 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 1862 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 1863 250 mm weighing not less than 150gms. 1864 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 1865 100X58X1.90 mm 1866 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 1867 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 1868 300 x 10mm 1869 150 x 10mm 1870 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 1871 125 mm 1872 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1873 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 1874 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick. 1875 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 1876 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 1877 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 1878 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1879 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 1880 4.0 mm thick glass panes 1881 Applying priming coat : 1882 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 1883 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1884 Two or more coats on new work 1885 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1886 One or more coats on old work 1887 Miscellaneous 1888 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1889 Cement mortar 1:6 (1 cement : 6 coarse sand) 1890 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 1891 Cement mortar 1:4 (1 cement :4 coarse sand 1892 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 1893 PLUMBING WORK 1894 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 1895 75 to 80 mm dia pipe 1896 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 1897 15 mm to 40 mm nominal bore 1898 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 1899 Up to 150 mm diameter 1900 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 1901 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 1902 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 1903 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 1904 Up to 150 mm diameter 1905 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 1906 Rectangular manhole 90x80 cm and 45 cm deep 1907 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1908 110 mm diameter 1909 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1910 a) Coupler 1911 110 mm 1912 b) Bend 87.5° 1913 110 mm bend 1914 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 1915 75 mm diameter pipes 1916 100 mm diameter pipes 1917 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1918 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1919 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 1920 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 1921 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : 1922 Kitchen sink without drain board 1923 610x510 mm bowl depth 200 mm 1924 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 1925 a) 32mm dia (for wash basin) 1926 b) 40mm dia (for sink and urinal) 1927 Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I allrespect 1928 Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets 1929 Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets 1930 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 1931 Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms 1932 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. 1933 The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 1934 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1935 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 1936 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 1937 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 1938 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 1939 P-Trap type Floor Trap 110 x 75 mm 1940 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 1941 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 1942 Providing and fixing 100 mm sand cast Iron grating for gully trap. 1943 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 1944 Providing & fixing soil, waste and vent pipes. 1945 a) 100mm dia centrifugally cast iron S & S pipe. 1946 b)75mm dia centrifugally cast iron S & S pipe. 1947 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 1948 a) for 100mm dia pipe. 1949 b) for 75mm dia pipe. 1950 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 1951 a) 100mm 1952 Sand cast iron S&S as per IS - 3989 1953 b) 75mm 1954 Sand cast iron S&S as per IS- 3989 1955 Providing and fixing plaincast iron S & S sanitary bend. 1956 a) 100mm 1957 Sand cast iron S&S as per IS - 1729 1958 b) 75mm 1959 Sand cast iron S&S as per IS - 3989 1960 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 1961 a) 100x100x100mm 1962 b) 75x75x75mm 1963 Providing and fixingcast iron terminal guard. 1964 a) 100mm 1965 b) 75mm 1966 Providing & fixingcast iron coller. 1967 a)100 mm 1968 Sand cast iron S&S as per IS - 3989 1969 b)75mm dia. 1970 Sand cast iron S&S as per IS - 3989 1971 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 1972 a) 100mm 1973 b) 75mm 1974 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 1975 a) 100mm inlet & 75mm outlet. 1976 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 1977 15 mm nominal outer dia Pipes 1978 20 mm nominal outer dia Pipes 1979 25 mm nominal outer dia Pipes 1980 32 mm nominal outer dia Pipes 1981 Providing and fixing brass stop cock of approved quality. 1982 15 mm nominal bore 1983 Providing and fixing gun metal gate valve with wheel of approved quality. 1984 a) 25mm dia nominal bore 1985 b) 32mm dia nominal bore 1986 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 1987 a) 25mm. Nominal bore 1988 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 1989 a) 15mm nominal bore 1990 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 1991 a) 15mm nominal bore 1992 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 1993 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 1994 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 1995 With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 1996 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1997 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 1998 a) 15mm nominal bore 1999 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 2000 a) 15mm nominal bore 2001 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 2002 a) 15mm nominal bore 2003 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 2004 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 2005 25mm nominal bore, weighing not less than 62 gms 2006 Cutting holes up to 30x30 cm in walls including making good the same: 2007 With common burnt clay F.P.S. (non modular) bricks 2008 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 2009 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 2010 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 2011 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 2012 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 2013 ELECTRICAL WORK 2014 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 2015 Group B 2016 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 2017 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 2018 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2019 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2020 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 2021 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 2022 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 2023 Group B 2024 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 2025 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2026 2 x 1.5 sq. mm 2027 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 2028 25 mm 2029 32 mm 2030 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 2031 100 mm X 100 mm X 60 mm deep 2032 150 mm X 75 mm X 60 mm deep 2033 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2034 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 2035 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 2036 S/F light plug point Modular type accessories :- 2037 Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providingandfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required. 2038 S/F power plug point modular type accessories :- 2039 Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required. 2040 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 2041 Supplying and fixing brass batten/ angle holder including connection etc. as required. 2042 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 2043 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2044 6 way, Double door 2045 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2046 4 way (4 + 12), Double door 2047 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2048 Single pole 2049 Single pole and neutral 2050 Triple pole 2051 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2052 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 2053 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 2054 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 2055 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 2056 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 2057 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 2058 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 2059 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 2060 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 2061 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 2062 Staff Qtrs Type-I . 2063 Structural Repair & Retrofitting 2064 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 2065 50 mm average thickness 2066 25 mm average thickness 2067 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 2068 Bars upto 12 mm diameter 2069 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 2070 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 2071 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 2072 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 2073 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 2074 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 2075 Repairs to Roof 2076 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 2077 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 2078 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 2079 Repair to Toilets 2080 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2081 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 2082 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 2083 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2084 Repair to Plaster and Plinth Protection 2085 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2086 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 2087 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 2088 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 2089 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2090 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 2091 With cement mortar 1:4 (1cement: 4 coarse sand) 2092 12mm cement plaster of mix : 2093 1:6 (1 cement : 6 course sand) 2094 6mm cement plaster to ceiling of mix : 2095 1:3 ( 1 cement : 3 fine sand) 2096 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 2097 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2098 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 2099 Old work (one or more coats) 2100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2101 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 2102 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2103 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 2104 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 2105 Repairs to Door / Windows 2106 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2107 Of area 3 sq. metres and below 2108 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 2109 Of area 3 sq. metres and below 2110 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 2111 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 2112 Renewal of old putty of glass panes (length) 2113 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 2114 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 2115 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 2116 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 2117 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 2118 300 mm weighing not less than 200gms. 2119 250 mm weighing not less than 150gms. 2120 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 2121 100X58X1.90 mm 2122 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 2123 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 2124 300 x 10mm 2125 150 x 10mm 2126 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 2127 Providing and fixing to existing door frames. 2128 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 2129 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws. 2130 30 mm thick shutterswith ISI marked M.S. butt hinges with necessary screws 2131 With ISI marked stainless steel butt hinges of required size 2132 Kiln seasoned and chemically treated hollock wood 2133 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 2134 With 12 mm mild steel U beading 2135 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 2136 125 mm 2137 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 2138 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 2139 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 2140 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 2141 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 2142 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 2143 4.0 mm thick glass panes 2144 Applying priming coat : 2145 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 2146 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2147 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2148 Two or more coats on new work 2149 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2150 One or more coats on old work 2151 Flooring 2152 Miscellaneous 2153 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 2154 Cement mortar 1:6 (1 cement : 6 coarse sand) 2155 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 2156 Cement mortar 1:4 (1 cement :4 coarse sand 2157 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 2158 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 2159 PLUMBING WORK OF TYPE-I (G) 2160 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 2161 75 to 80 mm dia pipe 2162 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 2163 15 mm to 40 mm nominal bore 2164 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 2165 Up to 150 mm diameter 2166 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 2167 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 2168 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 2169 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 2170 Up to 150 mm diameter 2171 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 2172 Rectangular manhole 90x80 cm and 45 cm deep 2173 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2174 110 mm diameter 2175 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2176 a) Coupler 2177 110 mm 2178 b) Bend 87.5° 2179 110 mm bend 2180 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 2181 75 mm diameter pipes 2182 100 mm diameter pipes 2183 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 2184 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 2185 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 2186 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 2187 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : 2188 Kitchen sink without drain board 2189 610x510 mm bowl depth 200 mm 2190 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 2191 a) 32mm dia (for wash basin) 2192 b) 40mm dia (for sink and urinal) 2193 Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I allrespect 2194 Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets 2195 Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets 2196 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 2197 Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms 2198 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. 2199 The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 2200 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 2201 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 2202 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 2203 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 2204 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 2205 P-Trap type Floor Trap 110 x 75 mm 2206 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 2207 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 2208 Providing and fixing 100 mm sand cast Iron grating for gully trap. 2209 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 2210 Providing & fixing soil, waste and vent pipes. 2211 a) 100mm dia centrifugally cast iron S & S pipe. 2212 b)75mm dia centrifugally cast iron S & S pipe. 2213 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 2214 a) for 100mm dia pipe. 2215 b) for 75mm dia pipe. 2216 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 2217 a) 100mm 2218 Sand cast iron S&S as per IS - 3989 2219 b) 75mm 2220 Sand cast iron S&S as per IS- 3989 2221 Providing and fixing plaincast iron S & S sanitary bend. 2222 a) 100mm 2223 Sand cast iron S&S as per IS - 1729 2224 b) 75mm 2225 Sand cast iron S&S as per IS - 3989 2226 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 2227 a) 100x100x100mm 2228 b) 75x75x75mm 2229 Providing and fixingcast iron terminal guard. 2230 a) 100mm 2231 b) 75mm 2232 Providing & fixingcast iron coller. 2233 a)100 mm 2234 Sand cast iron S&S as per IS - 3989 2235 b)75mm dia. 2236 Sand cast iron S&S as per IS - 3989 2237 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 2238 a) 100mm 2239 b) 75mm 2240 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 2241 a) 100mm inlet & 75mm outlet. 2242 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2243 15 mm nominal outer dia Pipes 2244 20 mm nominal outer dia Pipes 2245 25 mm nominal outer dia Pipes 2246 32 mm nominal outer dia Pipes 2247 Providing and fixing brass stop cock of approved quality. 2248 15 mm nominal bore 2249 Providing and fixing gun metal gate valve with wheel of approved quality. 2250 a) 25mm dia nominal bore 2251 b) 32mm dia nominal bore 2252 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 2253 a) 25mm. Nominal bore 2254 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 2255 a) 15mm nominal bore 2256 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 2257 a) 15mm nominal bore 2258 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 2259 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 2260 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 2261 With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 2262 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2263 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 2264 a) 15mm nominal bore 2265 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 2266 a) 15mm nominal bore 2267 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 2268 a) 15mm nominal bore 2269 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 2270 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 2271 25mm nominal bore, weighing not less than 62 gms 2272 Cutting holes up to 30x30 cm in walls including making good the same: 2273 With common burnt clay F.P.S. (non modular) bricks 2274 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 2275 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 2276 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 2277 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 2278 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 2279 ELECTRICAL WORK OF TYPE-I (G) 2280 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 2281 Group B 2282 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 2283 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 2284 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2285 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2286 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 2287 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 2288 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 2289 Group B 2290 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 2291 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2292 2 x 1.5 sq. mm 2293 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 2294 25 mm 2295 32 mm 2296 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 2297 100 mm X 100 mm X 60 mm deep 2298 150 mm X 75 mm X 60 mm deep 2299 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2300 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 2301 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 2302 S/F light plug point Modular type accessories :- 2303 Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providingandfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required. 2304 S/F power plug point modular type accessories :- 2305 Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required. 2306 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 2307 Supplying and fixing brass batten/ angle holder including connection etc. as required. 2308 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 2309 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2310 6 way, Double door 2311 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2312 4 way (4 + 12), Double door 2313 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2314 Single pole 2315 Single pole and neutral 2316 Triple pole 2317 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2318 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 2319 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 2320 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 2321 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 2322 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 2323 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 2324 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 2325 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 2326 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 2327 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 2328 TYPE-I (G) 5 UNITS 2329 REPAIRS TO ROOF 2330 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: 2331 Asbestos Cement sheet 2332 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m* 2333 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 2334 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, 2335 shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 2336 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 2337 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m* 2338 REPAIRS TO TOILETS 2339 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2340 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 2341 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 2342 For thickness of tiles 10 mm to 25 mm 2343 Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2344 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm 2345 REPAIR TO PLASTER & PLINTH PROTECTION 2346 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2347 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 2348 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 2349 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 2350 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 2351 With cement mortar 1:4 (1cement: 4 coarse sand) 2352 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2353 12mm cement plaster of mix : 2354 1:6 (1 cement : 6 course sand) 2355 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 2356 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2357 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 2358 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2359 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 2360 Old work (one or more coats) 2361 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. 2362 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface 2363 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2364 REPAIRS TO DOOR/WINDOWS 2365 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2366 Of area 3 sq. metres and below 2367 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 2368 Of area 3 sq. metres and below 2369 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 2370 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 2371 Renewal of old putty of glass panes (length) 2372 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 2373 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 2374 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 2375 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to steel windows by welding 2376 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 2377 300 mm weighing not less than 200gms. 2378 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 2379 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 2380 300 x 10mm 2381 150 x 10mm 2382 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 2383 125 mm 2384 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 2385 Twin rubber stopper 2386 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws. 2387 30 mm thick shutterswith ISI marked M.S. butt hinges with necessary screws 2388 With ISI marked stainless steel butt hinges of required size 2389 Kiln seasoned and chemically treated hollock wood 2390 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 2391 With 12 mm mild steel U beading 2392 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 2393 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 2394 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 2395 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 2396 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 2397 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 2398 4.0 mm thick glass panes 2399 Applying priming coat : 2400 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. 2401 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2402 over an under coat of suitableshadewithordinarypaint of approved brand and manufacture 2403 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2404 One or more coats on old work 2405 MISCELLANEOUS 2406 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 2407 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2408 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural ources) 2409 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 2410 Cement mortar 1:6 (1 cement : 6 coarse sand) 2411 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 2412 Cement mortar 1:4 (1 cement :4 coarse sand 2413 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 2414 PLUMBING WORK OF TYPE-I (G) 5 UNITS 2415 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 2416 15 mm to 40 mm nominal bore 2417 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 2418 Up to 150 mm diameter 2419 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 2420 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 2421 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 2422 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 2423 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 2424 Up to 150 mm diameter 2425 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 2426 Rectangular manhole 90x80 cm and 45 cm deep 2427 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2428 110 mm diameter 2429 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2430 a) Coupler 2431 110 mm 2432 b) Bend 87.5° 2433 110 mm bend 2434 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 2435 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 2436 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 2437 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 2438 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : 2439 Kitchen sink without drain board 2440 610x510 mm bowl depth 200 mm 2441 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 2442 a) 32mm dia (for wash basin) 2443 b) 40mm dia (for sink and urinal) 2444 Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I allrespect 2445 Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets 2446 Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets 2447 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 2448 Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe. 2449 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. 2450 The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 2451 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 2452 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 2453 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 2454 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 2455 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 2456 P-Trap type Floor Trap 110 x 75 mm 2457 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 2458 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 2459 Providing and fixing 100 mm sand cast Iron grating for gully trap. 2460 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 2461 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2462 15 mm nominal outer dia Pipes 2463 20 mm nominal outer dia Pipes 2464 25 mm nominal outer dia Pipes 2465 32 mm nominal outer dia Pipes 2466 Providing and fixing brass stop cock of approved quality. 2467 15 mm nominal bore 2468 Providing and fixing gun metal gate valve with wheel of approved quality. 2469 a) 25mm dia nominal bore 2470 b) 32mm dia nominal bore 2471 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 2472 a) 25mm. Nominal bore 2473 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 2474 a) 15mm nominal bore 2475 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 2476 a) 15mm nominal bore 2477 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 2478 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 2479 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 2480 With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 2481 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 2482 a) 15mm nominal bore 2483 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 2484 a) 15mm nominal bore 2485 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 2486 a) 15mm nominal bore 2487 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 2488 Cutting holes up to 30x30 cm in walls including making good the same: 2489 With common burnt clay F.P.S. (non modular) bricks 2490 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 2491 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 2492 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 2493 ELECTRICAL WORK OF TYPE-I (G) 5 UNITS 2494 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 2495 Group B 2496 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 2497 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 2498 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2499 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2500 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 2501 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 2502 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 2503 Group B 2504 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 2505 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2506 2 x 1.5 sq. mm 2507 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 2508 25 mm 2509 32 mm 2510 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 2511 100 mm X 100 mm X 60 mm deep 2512 150 mm X 75 mm X 60 mm deep 2513 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2514 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 2515 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 2516 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 2517 Supplying and fixing brass batten/ angle holder including connection etc. as required. 2518 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 2519 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2520 6 way, Double door 2521 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2522 4 way (4 + 12), Double door 2523 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2524 Single pole 2525 Single pole and neutral 2526 Triple pole 2527 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2528 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 2529 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 2530 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 2531 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 2532 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 2533 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 2534 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover 3on the fan box etc. as required. 2535 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 2536 Upto 450 mm sweep 2537 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 2538 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 2539 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 2540 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 2541 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 2542 Supplyof AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting FRLSame and other accessories etc.complete 2543 300 mm sweep 1300 rpm 2544 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. 2545 LIGHTNING CONDUCTOR 2546 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 2547 Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required. 2548 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 2549 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 2550 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 2551 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 2552 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 2553 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set 2554 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 2555 COST OF TYPE- 4 2556 Structural Repair & Retrofitting 2557 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 2558 50 mm average thickness 2559 25 mm average thickness 2560 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 2561 Bars upto 12 mm diameter 2562 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 2563 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge 2564 Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 2565 25mm thick in Grade M 25 with cement content not less than 330 kg per cum 2566 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 2567 Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge. 2568 Repairs to Roof 2569 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 2570 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 2571 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 2572 Repair to Toilets 2573 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 2574 For thickness of tiles 10 mm to 25 mm 2575 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2576 Repair to Plaster and Plinth Protection 2577 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2578 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 2579 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 2580 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2581 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 2582 With cement mortar 1:4 (1cement: 4 coarse sand) 2583 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 2584 15mm cement plaster on rough side of single or half brick wall of mix 2585 1:6 (1 cement : 6 course sand) 2586 6mm cement plaster to ceiling of mix : 2587 1:3 ( 1 cement : 3 fine sand) 2588 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2589 Two coats 2590 Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturers specification. 2591 One or more coats on old work 2592 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2593 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 2594 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2595 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 2596 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 2597 Repairs to Door / Windows 2598 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2599 Of area 3 sq. metres and below 2600 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 2601 Of area 3 sq. metres and below 2602 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 2603 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 2604 Renewal of old putty of glass panes (length) 2605 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 2606 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 2607 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 2608 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete Fixed to steel windows by welding 2609 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 2610 300 mm weighing not less than 200gms. 2611 250 mm weighing not less than 150gms. 2612 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 2613 100X58X1.90 mm 2614 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 2615 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 2616 300 x 10mm 2617 150 x 10mm 2618 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm. 2619 125 mm 2620 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 2621 Twin rubber stopper 2622 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 2623 Providing and fixing to existing door frames. 2624 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, castedmonolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 2625 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws. 2626 30 mm thick shutterswith ISI marked M.S. butt hinges with necessary screws 2627 With ISI marked stainless steel butt hinges of required size 2628 Kiln seasoned and chemically treated hollock wood 2629 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete. 2630 With 12 mm mild steel U beading 2631 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 2632 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 2633 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 2634 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 2635 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 2636 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 2637 4.0 mm thick glass panes 2638 Applying priming coat : 2639 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 2640 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2641 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2642 over an under coat of suitableshadewithordinarypaint of approved brand and manufacture 2643 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2644 One or more coats on old work 2645 Repairs to Flooring 2646 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2647 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 2648 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2649 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural ources) 2650 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 2651 25 mm thick 2652 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 2653 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 2654 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.size of tile 600x 600 mm 2655 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.size of tile 600x 600 mm 2656 Miscellaneous 2657 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 2658 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 2659 Cement mortar 1:6 (1 cement : 6 coarse sand) 2660 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 75 in superstructure above plinth level up to floor V level. 2661 Cement mortar 1:4 (1 cement :4 coarse sand 2662 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 2663 PLUMBING WORK OF TYPE-4 2664 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 2665 75 to 80 mm dia pipe 2666 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 2667 15 mm to 40 mm nominal bore 2668 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 2669 Up to 150 mm diameter 2670 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. 2671 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 2672 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 2673 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 2674 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 2675 Up to 150 mm diameter 2676 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : 2677 Rectangular manhole 90x80 cm and 45 cm deep 2678 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2679 110 mm diameter 2680 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2681 a) Coupler 2682 110 mm 2683 b) Bend 87.5° 2684 110 mm bend 2685 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 2686 75 mm diameter pipes 2687 100 mm diameter pipes 2688 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 2689 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 2690 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : 2691 W.C. pan with ISI marked white solid plastic seat and lid 2692 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required. 2693 a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. 2694 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : 2695 Kitchen sink without drain board 2696 610x510 mm bowl depth 200 mm 2697 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 2698 a) 32mm dia (for wash basin) 2699 b) 40mm dia (for sink and urinal) 2700 Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I allrespect 2701 Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets 2702 Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets 2703 Providing and fixing CP Brasssoap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour. 2704 Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe. 2705 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. 2706 The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 2707 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 2708 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 2709 Providing & fixing UPVC Floor trap of self cleansing designwith stainless steel grating complete in all respects. 2710 Multi Floor Trap (5 Ht) with height raiser and branch saddle strip of 50/75 mm outlet 2711 Plain Floor Trap (4 Ht) with 50 / 75 outlet and with height raiser 2712 P-Trap type Floor Trap 110 x 75 mm 2713 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 2714 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required. 2715 Providing and fixing 100 mm sand cast Iron grating for gully trap. 2716 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 2717 Providing & fixing soil, waste and vent pipes. 2718 a) 100mm dia centrifugally cast iron S & S pipe. 2719 b)75mm dia centrifugally cast iron S & S pipe. 2720 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. 2721 a) for 100mm dia pipe. 2722 b) for 75mm dia pipe. 2723 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 2724 a) 100mm 2725 Sand cast iron S&S as per IS - 3989 2726 b) 75mm 2727 Sand cast iron S&S as per IS- 3989 2728 Providing and fixing plaincast iron S & S sanitary bend. 2729 a) 100mm 2730 Sand cast iron S&S as per IS - 1729 2731 b) 75mm 2732 Sand cast iron S&S as per IS - 3989 2733 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 2734 a) 100x100x100mm 2735 b) 75x75x75mm 2736 Providing and fixingcast iron terminal guard. 2737 a) 100mm 2738 b) 75mm 2739 Providing & fixingcast iron coller. 2740 a)100 mm 2741 Sand cast iron S&S as per IS - 3989 2742 b)75mm dia. 2743 Sand cast iron S&S as per IS - 3989 2744 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 2745 a) 100mm 2746 b) 75mm 2747 Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 2748 a) 100mm inlet & 75mm outlet. 2749 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2750 15 mm nominal outer dia Pipes 2751 20 mm nominal outer dia Pipes 2752 25 mm nominal outer dia Pipes 2753 32 mm nominal outer dia Pipes 2754 Providing and fixing brass stop cock of approved quality. 2755 15 mm nominal bore 2756 Providing and fixing gun metal gate valve with wheel of approved quality. 2757 a) 25mm dia nominal bore 2758 b) 32mm dia nominal bore 2759 Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats). 2760 a) 25mm. Nominal bore 2761 Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions. 2762 a) 15mm nominal bore 2763 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 2764 a) 15mm nominal bore 2765 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 2766 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 2767 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 2768 With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 2769 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 2770 a) 15mm nominal bore 2771 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 2772 a) 15mm nominal bore 2773 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 2774 a) 15mm nominal bore 2775 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 2776 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 2777 25mm nominal bore, weighing not less than 62 gms 2778 Cutting holes up to 30x30 cm in walls including making good the same: 2779 With common burnt clay F.P.S. (non modular) bricks 2780 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 2781 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 2782 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 2783 Rectangular manhole 90x80 cm with rectangular cover600 x 450 mm of grade LD - 2.5 2784 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 2785 ELECTRICAL WORK OF TYPE-4 2786 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 2787 Group B 2788 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 2789 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 2790 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2791 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2792 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 2793 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 2794 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 2795 Group B 2796 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. 2797 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2798 2 x 1.5 sq. mm 2799 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 2800 25 mm 2801 32 mm 2802 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 2803 100 mm X 100 mm X 60 mm deep 2804 150 mm X 75 mm X 60 mm deep 2805 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2806 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 2807 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 2808 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 2809 Supplying and fixing brass batten/ angle holder including connection etc. as required. 2810 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 2811 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2812 6 way, Double door 2813 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2814 4 way (4 + 12), Double door 2815 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2816 Single pole 2817 Single pole and neutral 2818 Triple pole 2819 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2820 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 2821 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 2822 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 2823 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 2824 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 2825 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 2826 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 2827 Upto 450 mm sweep 2828 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 2829 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 2830 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 2831 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 2832 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 2833 Supplyof AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting FRLSame and other accessories etc.complete 2834 300 mm sweep 1300 rpm 2835 COST OF WORKSHOP 2836 Repairs to Roof 2837 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: 2838 Asbestos Cement sheet 2839 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m* 2840 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m* 2841 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 2842 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 2843 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 2844 Repair to Plaster and Plinth Protection 2845 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2846 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 2847 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 2848 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 2849 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2850 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 2851 With cement mortar 1:4 (1cement: 4 coarse sand) 2852 12mm cement plaster of mix : 2853 1:6 (1 cement : 6 course sand) 2854 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour 2855 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2856 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 2857 Old work (one or more coats) 2858 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2859 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 2860 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2861 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 2862 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 2863 Miscellaneous 2864 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 2865 In cement mortar 2866 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 2867 Cement mortar 1:6 (1 cement : 6 coarse sand) 2868 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 2869 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 2870 75 to 80 mm dia pipe 2871 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2872 110 mm diameter 2873 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2874 a) Coupler 2875 110 mm 2876 b) Bend 87.5° 2877 110 mm bend 2878 ELECTRICAL COST OF WORKSHOP 2879 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 2880 Group C 2881 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2882 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire 2883 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 2884 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 2885 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2886 2 x 1.5 sq. mm 2887 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 2888 25 mm 2889 32 mm 2890 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 2891 100 mm X 100 mm X 60 mm deep 2892 150 mm X 75 mm X 60 mm deep 2893 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2894 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 2895 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. 2896 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 2897 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2898 6 way, Double door 2899 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2900 4 way (4 + 12), Double door 2901 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2902 Single pole 2903 Single pole and neutral 2904 Triple pole 2905 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2906 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 2907 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 2908 Upto 450 mm sweep 2909 Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item.. 2910 Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent). 2911 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 2912 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 2913 Supply of 30W LED recess mounted fixtureMAKE-PHILIPS CAT NO.RC380B LED30S-6500 L60W60 PSD OD S1 or equivalent. 2914 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 2915 Supplyof AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting FRLSame and other accessories etc.complete 2916 450 mm sweep 1400 rpm 2917 ELECTRIC SUB STATION 2918 Repairs to Roof 2919 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 2920 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 2921 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 2922 Repair to Plaster and Plinth Protection 2923 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2924 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 2925 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 2926 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2927 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 2928 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 2929 With cement mortar 1:4 (1cement: 4 coarse sand) 2930 12mm cement plaster on rough side of single or half brick wall of mix 2931 1:6 (1 cement : 6 course sand) 2932 6mm cement plaster to ceiling of mix : 2933 1:3 ( 1 cement : 3 fine sand) 2934 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2935 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2936 over an under coat of suitableshadewithordinarypaint of approved brand and manufacture 2937 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2938 One or more coats on old work 2939 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2940 Two coats 2941 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 2942 Old work (one or more coats) 2943 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2944 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 2945 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2946 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. 2947 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface 2948 Repairs to Door / Windows 2949 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 2950 Of area 3 sq. metres and below 2951 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 2952 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 2953 Renewal of old putty of glass panes (length) 2954 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer. 2955 Using flats 30x6mm for diagonal braces and central cross piece 2956 Miscellaneous 2957 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 2958 Anti-termite treatment 2959 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2960 110 mm diameter 2961 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2962 a) Coupler 2963 110 mm 2964 b) Bend 87.5° 2965 110 mm bend 2966 PUMP ROOM. 2967 Repairs to Roof 2968 Repairs to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd (Dr. Fixit Make), including cutting the area of plaster in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1cement: 4 coarse sand) 2969 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 2970 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 2971 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 2972 Repair to Plaster and Plinth Protection 2973 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 2974 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. 2975 With cement mortar 1:4 (1cement: 4 coarse sand) 2976 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2977 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 2978 15mm cement plaster on rough side of single or half brick wall of mix 2979 1:6 (1 cement : 6 course sand) 2980 6mm cement plaster to ceiling of mix : 2981 1:3 ( 1 cement : 3 fine sand) 2982 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 2983 One or more coats on old work 2984 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2985 Two coats 2986 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) 2987 Old work (one or more coats) 2988 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 2989 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2990 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. 2991 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface 2992 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2993 Repairs to Door / Windows 2994 Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: 2995 Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) 2996 Renewal of old putty of glass panes (length) 2997 Miscellaneous 2998 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 2999 In cement mortar 3000 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3001 110 mm diameter 3002 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 3003 a) Coupler 3004 110 mm 3005 b) Bend 87.5° 3006 110 mm bend 3007 Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent). 3008 Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent). 3009 SEWERAGE SYSTEM 3010 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : 3011 All kinds of soil 3012 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 3013 Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 3014 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 3015 150 mm dia. R.C.C. pipe 3016 450 mm dia. R.C.C. pipe 3017 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) 3018 150 mm diameter S.W.Pipe (L*.35*.10) 3019 450 mm diameter S.W.Pipe (L*.6*.15 ) 3020 Constructing brick masonry manholein cement mortar 1 : 4 (1 cement : 4 coarse sand) with RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4gradestone aggregate 20mm nominal size); foundation concrete 1:4:8 mix(1 cement : 4 coarse sand : 8 gradedstoneaggregate40 mm nominalsize) insideplastering 12 mm thickwith cementmortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and makingchannels incementconcrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat ofneatcement completeasper standard design 3021 Inside size 90 x 80 cm & 45 cmdeep including CI cover with frame (light duty) 455 x 610mm internal dimensions, total weight of cover & frame to be not lessthan 38 kg (weight of cover 23 kg and weight of frame 15 kg) 3022 With common burnt clay F.P.S.(non modular) bricks of classic designation 7.5 3023 Extra for depth for manholes: 3024 size 90 X 80 cm 3025 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 3026 Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top with FPS bricksclass designation 75in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. 3027 0.91m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) 3028 with common burnt clay F.P.S.(non module) brick of class designation 7.5 3029 Extra depth for circuler type manholes 0.91 m internal dia ( at bottom ) beyond 0.91m to 1.67 m . 3030 with common burnt clay F.P.S.(non module) brick of class designation 7.5 3031 Providing and fixing square mouthS. W. Gully trapclass SP-1 complete with C.I. gratingbrickmasonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 3032 180 x 150 mm. size P type 3033 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 3034 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 3035 With 20x20 mm square bar 3036 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm 3037 Cleaning and desilting of gully trap chamber, including removal ofrubbish mixed with earth etc. and disposal of same, all as per thedirection of Engineer-in-charge. 3038 COST OF ENTRANCE GATE 3039 Earth Work 3040 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 3041 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil 3042 Concrete Work 3043 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 coarse sand (zoneIII) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 3044 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 3045 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 3046 Reinforced Cement Concrete 3047 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 3048 Upto plinth level 3049 (i) R.C.C. work in Footing 3050 (ii) R.C.C. work in Beam 3051 (iii) R.C.C. work in Columns 3052 Above plinth to floor-V lvl 3053 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 3054 (i) R.C.C. work in Beam 3055 (ii) R.C.C. work in Columns 3056 (iii) R.C.C. work in Slab 3057 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 3058 Foundations, footings, bases of columns, etc. for mass concrete. 3059 Columns,Pillars, Piers, Abutments, Posts and Struts. 3060 Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick 3061 Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick 3062 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 3063 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more. 3064 Masonry Work 3065 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 3066 Wood and PVC Work 3067 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 3068 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. 3069 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper 3070 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete(a) 125 mm. 3071 Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . 3072 Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. 3073 300 x 10mm 3074 200 x 10mm 3075 Steel Work 3076 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 3077 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 3078 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 3079 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. 3080 Flooring 3081 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 3082 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete 3083 Finishing 3084 12 mm cement plaster on the fair side of single or half brick wall (a) 1:6 (1 cement: 6 coarse sand) 3085 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand). 3086 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) 3087 6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand) 3088 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. 3089 Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) 3090 Applying priming coat: 3091 With ready mixed aluminium primer of approved brand andmanufacture on resinous wood and plywood 3092 With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works. 3093 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 3094 Finsihing with Epoxy paint (two or more coats) at all locations pepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work. 3095 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3096 Water Proofing 3097 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 3098 Supply & Fixing of Prepainted coloured Trapezoidal or approved profiled Sheeting 1000-1020 mm cover width, 28-30 mm high crests with subtle square fluting in the five pan at nominal 190-255 mm (as approved by EIC) centre-to-centre manufactured out of 0.50 mm TCT hi-tensile prepainted Zincalume /Galvalume steel (AZ-150 gsm. Aluminium –Zinc alloy metallic coating of total both sides 550 MPa yield stress as per AS-1397). Colour/ Exterior coat of RMP 20 micron top coat applied over 5 micron primer and a 5 micron polyester back coat applied over 5 microns primer OR equivalent coating/painting. The sheet shall have wide pans with stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side laps to prevent leakages. The sheet shall be fixed by means of anti corrosive approved make Rust Shield (Epoxy Polymer) coated self-drilling self tapping fasteners 12-14 X 55 mm with EPDM seals through crest for roofing and 12-24 X 20 mm through valley (pans) for wall cladding. The sheet shall be supplied in lengths maximum up to 6-12 meter long to suit site dimensions. The scope includes all sealing of joint, curves, edges or other accessories with silicon sealant. 3099 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 3100 ELECTRICALWorksMAIN GATE 3101 SUB HEAD - I: CIRCUIT CUM POINT WIRING 3102 SWITCH CONTROL LIGHT POINTS 3103 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 3104 Group C 3105 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Switch Control Secondary Points) 3106 Group C 3107 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) 3108 Group C 3109 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (withoutIndependent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Switch Control Secondary Points) 3110 Group C 3111 MCB CONTROL LIGHT POINTS 3112 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) 3113 Primary point controlled by one MCB. 3114 Same as item above but Secondary point. i.e. Points to be looped with Primary pointwith 2.5 sqmm wire and Point wiring 3115 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 3116 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 3117 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 3118 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 3119 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 3120 2 x 10 sq. mm + 1 x 10 sq.mm earth wire 3121 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 3122 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 3123 Supplying and fixingsuitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing3 pin 5/6 Amp modular socket outlet and 5/6 A modular switch, connection etc. as required. 3124 Supply and Wiringfor 250 volts singlephase and neutral 2 Nos 6 amps socket outlate with control by 1 No switched with 2.5 sq.mm PVCinsulatedcopper conductor1100 volts grade stranded flexible FRLS wires inconcealed or surface mounted 25 mm dia 2mm thickPVC conduit including providing and fixing of 6 amps 3 pin switch socket outlet of aprpoved make and design in 2 mm thick GI box with grid plate and earthingofthird pin of the socket with2.5Sq. mm PVC insulated copper conductor strandedflexibleFRLSwire.(maximum four no. of switches socket shall be connected on onecircuit) 3125 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 3126 Supplying and fixing 63 A, 415 V, TPN Industrial type socketoutlet, with 4 pole and earth, metal enclosed plug topalongwith 63 A C curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 3127 Supplying and fixing 80 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 80 A C curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 3128 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 3129 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required. (ACs & Gysers) 3130 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3131 Telephone socket outlet 3132 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3133 1 or 2 Module (75mmX75mm) 3134 6 module (78mm X 205 mm X 50 mm) 3135 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3136 3 pin , 5/6 amps socket outlet 3137 5/6 amps switch 3138 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 3139 25 mm 3140 32 mm 3141 SUBHEAD -II - FITTINGS & FIXTURES 3142 Supply, Installation, Testing and Commissioning of 10 W Bulk head Light. 3143 Supply, Installation, Testing and Commissioning of 5W Mirror Light. 3144 Supply, Installation, Testing and Commissioning of 18W Surface/Recessed Mounted LED circular Downlighter. 3145 Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mouted 4 ft. LED 3146 Supply, Installation, Testing and Commissioning of 15WSurface mountedLED Square Downlighter. 3147 Supply, Installation, Testing and Commissioning of 12/9WRecessed mountedLED circular Downlighter. 3148 Supply, Installation, Testing and Commissioning of9W (Nominal)Wall Bracket Light 3149 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 3150 SupplyInstallation, Testing and Commissioning of 250 mm dia Domestic Exhaust Fan 3151 SUBHEAD - III - DISTRIBUTION BOARDS 3152 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 3153 6 way, Double door 3154 8 way, Double door 3155 12 way, Double door 3156 Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 3157 4 way (4 + 12), Double door 3158 6 way (4 + 18), Double door 3159 8 way (4 + 24), Double door 3160 Supplyingand fixingoffollowingwayssurface/recessmounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 3161 12 way (4 + 36), Double door 3162 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 3163 Single Pole 3164 Single Pole Neutral 3165 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 3166 40 A 3167 63 A 3168 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 3169 25 A 3170 40 A 3171 63 A 3172 Supplying and fixing following rating, double pole, (single phaseand neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 3173 25 A 3174 40 A 3175 63 A 3176 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 3177 BASKET BALL COURT 3178 For One No. of Court 3179 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per directionof Engineer - in - charge Nominal concrete 1:3:6 or richer mix 3180 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 3181 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 3182 Thermo-Mechanically Treated bars of grade Fe-500D or more. 3183 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 3184 40 mm thick with 20 mm nominal size stone aggregate 3185 Providing and fixing AC strips in joints ofcement concrete floors.70 mm wide and 4 mm thick. 3186 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. 3187 On steel work: (ON POLES) 3188 Vertical member (8in dia & 3.2 m long) 3189 Horizontal member (8in dia & 2.5 m long) 3190 UGT WITH PUMP HOUSE 3191 Cost of Under Ground Sump 3192 Cost of 2 Set of 7.5 HP submersible pump (i.e. Rs 75,000, each) including all control panel and fitting charges, etc. 3193 EXTERNAL ELECTRICAL WORK 3194 SUBHEAD - I - MAIN BOARDS 3195 METER BOARDS 3196 Supply, installation, testing and commissioning of M.V. cubical type totally enclosed dust, dump and vermin proof Meter Bords complete with bus bars, MV danger notice plate, on surface ISI marked Electronic kWh meter, indication lamps, CTs, Interconnection with suitable capacity aluminium strips / rods, door covers, seperate compartment for each meter, glass inspection window, connection of incoming and outgoing cables with thimbles, powder coated having following incoming and outgoingMCBs MCCBs and kWh meters complete as required. 3197 PANEL- KITCHEN DINING 3198 INCOMER 3199 1 No.40 Amp FP MCCB, 15 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 3200 METERING & INDICATION 3201 1 set of R,Y,B phase indicating lamps 3202 Digital Multifunction meter for Voltage, Current & KW with selector switch. Each with 3nos. of 2A SP MCB & 3nos 40/5A CTs (40A/500V) rating 3203 1 Sets of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required. 3204 BUS-BAR 3205 1 Set of 50A TPN Aluminium Bus Bar with colour coded PVC Sleeves 3206 OUT GOING: 3207 2 Nos. 25A TPN MCB of 10kA 3208 3 No. 40A DP MCB of 10kA. 3209 Supplying,Receiving, fixing, testing & commissioning ofabove described Panel 3210 METER BOARDS - TYPE-III, TYPE II & TYPE I 3211 INCOMER 3212 1 No.63 Amp FP MCCB, 15 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 3213 METERING & INDICATION 3214 1 set of R,Y,B phase indicating lamps 3215 Digital Multifunction meter for Voltage, Current & KW with selector switch. Each with 3nos. of 2A SP MCB & 3nos 63/5A CTs (63A/500V) rating 3216 1 Sets of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required. 3217 BUS-BAR 3218 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves 3219 OUT GOING: 3220 4 Nos. 40A TPN MCB of 10kA 3221 2 Nos. 40A DP MCB of 10kA. 3222 Supplying,Receiving, fixing, testing & commissioning ofabove described Panel 3223 METER BOARDS -DORMITORY BOYS & GIRLS 3224 INCOMER 3225 1 No.63 Amp FP MCCB, 15 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 3226 METERING & INDICATION 3227 1 set of R,Y,B phase indicating lamps 3228 Digital Multifunction meter for Voltage, Current & KW with selector switch. Each with 3nos. of 2A SP MCB & 3nos 63/5A CTs (63A/500V) rating 3229 1 Sets of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required. 3230 BUS-BAR 3231 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves 3232 OUT GOING: 3233 4 Nos. 40A TPN MCB of 10kA 3234 2 Nos. 40A DP MCB of 10kA. 3235 Supplying,Receiving, fixing, testing & commissioning ofabove described Panel 3236 METER BOARDS - VICE PRINCIPLE RESIDENCE, GUEST HOUSE, WORKSHOP & GYM 3237 1 No.40Amp FP MCCB, 15 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 3238 PANEL -SCHOOL BUILDING & MP HALL 3239 INCOMER 3240 1 No.63 Amp FP MCCB, 15 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 3241 METERING & INDICATION 3242 1 set of R,Y,B phase indicating lamps 3243 Digital Multifunction meter for Voltage, Current & KW with selector switch. Each with 3nos. of 2A SP MCB & 3nos 63/5A CTs (63A/500V) rating 3244 1 Sets of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required. 3245 BUS-BAR 3246 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves 3247 OUT GOING: 3248 4 Nos. 40A TPN MCB of 10kA 3249 3 No. 40A DP MCB of 10kA. 3250 Supplying,Receiving, fixing, testing & commissioning ofabove described Panel 3251 SUBHEAD - II - EARTHING 3252 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 3253 Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick includingaccesssories, and providingmasonary enclosurewith cover plate (CI heavy duty) having locking arrangement and watering pipe pipe of 2.7 mtr long etc. with charcoal or coke and salt) as required. 3254 Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. 3255 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. 3256 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 3257 Cost of Septic Tank [For Repairing of existing Septic Tank]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Bihar View Result →
18.
Public Administrative Department #9463829 Technical Bid
Tender for the remaining work (development work and electrification work) of Sanskriti School under construction under CG City Scheme, 1 ROAD WORK 2 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. DSR 16.1 3 Construction of granular sub-base by providing close graded Materialspreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. PWD SOR 4 Providing and laying design mix cement concrete of M-30 grade, inroads/ taxi tracks/ runways, using cement content as per designmix, using coarse sand and graded stone aggregate of 40 mm nominalsize in appropriate proportions as per approved & specified designcriteria, providing dowel bars with sleeve/ tie bars wherever required,laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdyM.S. channel sections, curing, making provision for contraction/expansion, construction & longitudinal joints ( 10 mm wide x 50 mmdeep) by groove cutting machine, providing and filling joints withapproved joint filler and sealants, complete all as per direction ofEngineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement content in M-30 is @ 340 Kg/Cum. Excess/Less cement Used as per design mix is separately.DSR 16.43.2 5 Providing and fixing in position pre-moulded joint filler in expansion joints.DSR 16.45 6 Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level PWD SOR 504 7 PARKING 8 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.DSR 16.1 9 Construction of granular sub-base by providing close graded Materialspreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. PWD 10 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturers specifications & direction of Engineerin-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. DSR 16.91.2 11 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. DSR 16.63 12 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarsesand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment. (Precast C.C. kerb stone shall be approved by Engineer-in-charge). DSR 16.69 13 DRAIN 14 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.DSR 2.8.1 15 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)DSR 4.1.8 16 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level DSR 5.33.1 17 Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level PWD 504 18 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) DSR 13.7.1 19 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 20 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work DSR 13.61.1 21 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.DSR 23.9 22 COLUMN UPTO 10 FT 23 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6. 24 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work,including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately) All works upto plinth level DSR 5.37.1 25 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm per coat DSR 22.23.1 26 RETAINING WALL 27 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. DSR 2.8.1 28 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 29 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos emulsifiable concentrate of 20% DSR 2.34 30 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration DSR 2.35.3.1 31 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). DSR4.1.6 32 Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete DSR 5.9.1 33 Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR 5.9.2 34 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6 35 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 5.37.1 36 Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 37 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side.The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm per coat DSR 22.23.1 38 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side.The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm DSR 22.23.2 39 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. Using rough kota stone. DSR 22.1.1 40 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone DSR 22.2.1 41 SKYLIGHT & BRICK WORKS 42 Providing & fixing of roof with multilayer standing seam polycarbonate panel system of 18mm thickness (min) including all standard fixing accessories on top of the supporting structure (paid extra) complete & as per the direction of the engineer in charge. The panels should work on angular daylighting concept with translucent and opaque combination of louvers inside, for better thermal insulations and diffusion of light especially with white and clear combination designed for tropical regions & shading throughout the day for better ambient temperature below the roof. Panels shall have minimum seven layers with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. The entire panel system shall be with a width from min 1200mm. Bigger width and minimal junctions should be preferred for better performance. Panels shall be manufactured with vertical offset standing seam at both sides of the panel. Panels have to be fixed on purlin with snap on connectors with grip lock double tooth locking mechanism and will be secured on MS Structure/ purlins (will be paid separately) with HDSS Fastener and double tooth polycarbonate connector for best stability and having a pull-out load of min 7000N (7KN) tested as per ISO 6892:1998 and IS 1608:2005. Panels cell structure be in truss bridge design or commonly called X structure for better strength and stability. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on polycarbonate panel which have been exposed to UV for a min. of 500 hours as per ASTM G155. Panels shall not have yellowness Index as per ATSMD 1925 of 15 units when tested on a sample exposed to UV for 500 hours as per ASTM G 155. U value shall not be more than 2.0W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cp/ Aluminium U/F profile/ Glazing Bar (all mill finish) for ends as required. Trained and factory authorized layout with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge.Colour: as per approval. 43 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 44 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.4.2 45 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) DSR 13.4.2 46 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) DSR 13.5.2 47 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 48 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR 13.46.1 49 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 50 CHAIN LINK FENCING 51 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. DSR 2.8.1 52 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 53 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos emulsifiable concentrate of 20% DSR 2.34 54 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration DSR 2.35.3.1 55 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) DSR 4.1 56 Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete DSR 5.9.1 57 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6 58 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 5.37.1 59 Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 60 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade DSR 16.70.2 61 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel rimer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes DSR 10.16 62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 63 M.S. GRILL WORKS 64 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding DSR 9.48.1 65 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece DSR 10.5.2 66 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 67 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25 68 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 69 BASEMENT WORK 70 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 6 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 71 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos emulsifiable concentrate of 20% DSR 2.34 72 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration DSR 2.35.3.1 73 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). DSR 4.1.10 74 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick DSR 11.26.1 75 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 76 BASKETBALL COURT 77 Concrete Base:-Providing and laying of 75 mm thick PCC, 75mm RCC with 6mm bar, spacing 300 C/C as per slope & level specified by concern federation . 78 Synthetic Specification: -Providing and laying of ITF Classified material. 8 layers System Synthetic Acrylic for Synthetic Basketball Court:-(1 layer) Conrete Primer(2 layer) Resurfacer(3 layer) Cushion Rubber(4 layer) Top CoatWhite Line Marking as per standard 79 Basketball pole fix type 6” round pipe , Projection 2*20 Acrylic board 20mm Malaysia with dunking ring (3 spring) 80 Providing and fixing chain link fencing made with vertical pipe of 50 mm & horizontal 40 mm OD MS pipe frame size of 3 m x 3 m with 2”x2” of 10 SWG hot dip galvanized chain link fencing fixed with nut bolt/wire for ms flat patti and complete with all T&P. 81 Providing and fixing of lighting as per details. Nos of pole-4 nos with 20 ft light, Metel halide light 400 wt on each pole. No of MCB-05 ,cable, junction box with complete fit. 82 SPORTS FACILITIES 83 LAWN TENNIS COURT 84 Concrete Base:-Providing and laying of 75 mm thick PCC, 75mm RCC with 6mm bar, spacing 300 C/C as per slope & level specified by concern federation . 85 Synthetic Specification: -Providing and laying of ITF Classified imported material (AcryCoat Made In Europe)8 layers System Synthetic Acrylic for Synthetic Court :-• (1 Layer) Concrete Primer • (2 layers) Acrylic Resurfacer• (3 layers) Cushion • (2 layers) Top Coat•Line Marking 86 Providing and fixing chain link fencing made with vertical pipe of 50 mm & horizontal 40 mm OD MS pipe frame size of 3 m x 3 m with 2”x2” of 10 SWG hot dip galvanized chain link fencing fixed with nut bolt/wire for ms flat patti and complete with all T&P 87 Providing and fixing of lighting as per details. Nos of pole-4 nos with 20 ft light, Metel halide light 400 wt on each pole. No of MCB-05 ,cable, junction box with complete fit. 88 Pole socket type 80*80 mm , thickness (4 mm) with net 89 SKATING RING 90 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.DSR 16.1 91 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverableseparately). DSR 16.75 92 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksDSR 10.25.2 93 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.New work (Two or more coats) DSR 16.47.1 94 HORTRICULTURE AND LANSCAPING 95 Supply and stacking of of good earth at site including royaltyand carriage up to 1 Km DSR 2.2 96 Supply and stacking of sludge at site including royalty and carriage up to 1 Km DSR 2.3 97 Supply and stacking of dump manure from approved source at site including carriage up to 1 Km DSR 2.4.3 98 Rough dressing the trenched ground including breaking of clods DSR 2.5 99 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. DSR 2.6 100 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. DSR 2.7 101 Spreading of sludge, dump manure and or good earth and mixing as per direction of engineer incharge DSR 2.8+2.9 102 Grassing with selection No-1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn. free from weeds and fit for moving and disposal of rubbish as directed DSR 2.10.1 103 Half brick circular treeguard in brick 1.25 m internal dia and of ht 1.20 m above ground and 0.20 m below ground..... DSR 2.15 104 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. DSR 2.54 105 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. DSR 2.56 106 Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge DSR 7.5 107 Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge DSR 7.24 108 Supply and stacking of Ficus bengalensis (Bargad) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR 7.28 109 Supply and stacking of Ficus elastica Decora (Rubber plant) plant of height 45-60 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.DSR 7.31 110 Supply and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-incharge DSR 7.63 111 Supply and stacking of Polyalthia longifolia (Ashok) plant of height 180- 195 cm. in gunny bag of size 30 cm as per direction of the officer-incharge. DSR 7.75 112 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge DSR 2.28 113 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge DSR 2.33 114 Plumbing Detail 115 SANITARY FIXTURES 116 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR 17.1.1 117 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. DSR 17.78 118 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.. DSR 17.80 119 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 17.31 120 Providing and fixing toilet paper holder : C.P. brass DSR 17.34.1 121 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single holebasinmixer. 122 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. DSR 17.10.1.1 123 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore DSR 18.53.1 124 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore DSR 18.51.1 125 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore DSR 18.16.1 126 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. DSR 17.72 127 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. MR 128 Providing and fixing of SS coat hook complete in all respect as approved by Engineer In Charge MR 129 Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.DSR 17.70.1 130 Providing and fixing of SS grab bar complete in all respect as approved by Engineer In Charge MR 131 Providing and fixing urinal partition chinaware complete in all respect MR 132 Providing and fixing of sink mixer complete in all respect. MR 133 Providing and fixing SS labourtory sink as per detailMR 134 Providing and fixing laboratory sink mixer complete in all respect.MR 135 Providing and fixing drinking water sink complete in all respects MR 136 SOIL , WASTE AND VENT SYSTEM 137 Providing and fixing soil, waste and vent pipes-Hubless centrifugally cast (spun) iron pipes as perIS:15905 with stainless steel coupling with EPDM rubber complete in all respectincluding all required fittings: 75 mm dia 138 Providing and fixing soil, waste and vent pipes-Hubless centrifugally cast (spun) iron pipes as perIS:15905 with stainless steel coupling with EPDM rubber complete in all respectincluding all required fittings : 100 mm dia 139 Providing and fixing soil, waste and vent pipes-Hubless centrifugally cast (spun) iron pipes as perIS:15905 with stainless steel coupling with EPDM rubber complete in all respectincluding all required fittings : 150 mm dia 140 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Hubless : 100 mm inlet and 100 mm outlet DSR 17.60.1 141 Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. DSR 18.58.1.1 142 Providing and fixing floor clean out plug consist of CI bend & GI socket heavy class with Brass cap & key for opening male threaded cap etc. including lead caulked to CI pipescomplete in all respects as per drawing / sample approved by Engineer -in -ChargeFCO (floor clean out plug shall be flushed with floor finish: 100 mm dia/150 mm dia 143 Water Supply system 144 Inside Toilets 145 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work. DSR 18.9 146 15 mm nominal outer dia. Pipes. 147 20 mm nominal outer dia. Pipes. 148 25 mm nominal outer dia. Pipes. 149 Distribution lines 150 Providing and fixing of GI Pipes medium class IS :1239 including all required fittings etc. DSR 18.12 151 20 mm dia. nominal bore 152 25 mm dia. nominal bore 153 32 mm dia. nominal bore 154 40 mm dia. nominal bore 155 50 mm dia. nominal bore 156 65 mm dia. nominal bore 157 80 mm dia. nominal bore 158 100 mm dia. nominal bore 159 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore DSR 18.13.1 160 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore DSR 18.13.2 161 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). DSR 18.14 162 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore: DSR 18.17 163 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. DSR 18.17.2 164 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore DSR 18.17.3 165 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore DSR 18.17.4 166 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore DSR 18.17.5 167 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore DSR 18.17.6 168 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore DSR 18.18.1 169 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore DSR 18.18.2 170 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore DSR 18.18.3 171 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 172 Providing and fixing submrsible vertical drainage sump pumps in sumps including all required valve , fittings etc. complete in all respects. Fully auomatic type with level float control.Status (w+s)1 working + 1 stand bysolid hanldling 40 mm size.discharge 5 lps and head-15 mtr 173 Providing and fixing submrsible vertical sewage sump pumps in sumps including all required valve , fittings etc. complete in all respects. Fully auomatic type with level float control.Status (w+s)1 working + 1 stand by solid hanldling 40 mm size.discharge 5 lps and head-15 mtr 174 RAIN WATER SYSTEM 175 Providing and fixing of HDPE-80 pipes and fittings for rain water pipes complete in all respects. : 100 mm dia 176 Providing and fixing of HDPE-80 pipes and fittings for rain water pipes complete in all respects. : 150 mm dia 177 Providing and fixing of HDPE-80 pipes and fittings for rain water pipes complete in all respects. : 200 mm dia 178 Making of 600x600 mm size khurah complete in all respects including water proofing etc. 179 EXTERNAL SEWARAGE AND DRAINAGE 180 GARDEN IRRIGATION 181 Providing and fixing HDPE pipes conforming to IS:4984 PE 63 Class IV (6 kg/sqcm) including all fittings, e.g.couplings, tees, bends, reducers and screwed adoptors, welded joint as per manufacturers recommendations. 182 a) 32 mm O.D. 183 b) 40 mm O.D. 184 c) 63 mm O.D. 185 Providing and fixing uPVC Schedule 40 pipes conforming to ASTM D-1785complete with uPVC Schedule 40 fittings including necessary cutting of pipes, jointing with HDPE pipe with sadddle fitting completewith testing and commissioning of pipe lines : (a) 1 nominal size 186 Providing and fixing 25 mm brass dia quick coupling valve fitting with auto-close lid, SS spring, brass valve, complete in all respects (Harit model HT-71Bor eq.). 187 Providning and fixing bronze ball valve with screwed female/flangedends with stainless steel valve and spindle, glass fileed tefelon seating and gland packing, quarter turn lever operate full bore design, hydraulically tetsed to 20 kg/sqcm 188 a) 25 mm nominal bore 189 b) 40 mm nominal bore 190 a) 50 mm nominal bore 191 Providing and fixing cast iron flanged wafer type butterfly Valve with quarter turn operation complete in all respects confirming to IS:13095 PN1.0: (a) 65 mm dia 192 Constructing masonry chamber 60x60x75 cms inside with 75 class designation brick work in cement mortar 1:5 (1cement : 5 fine sand) for sluice valve with C.I. cover 500x450 mm R.C.C. top slab 1:2:4 mix (1cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3(1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement and outside plaster finished rough complete as per standard design. 193 Providing and fixing 15 mm N.B. air release valve alongwith FTA I/c 1 no. ball valve for fixing to HDPE pipeline complete 194 Constructing masonry chamber 60x60x75 cms inside with 75 class designation brick work in cement mortar 1:5 (1cement : 5 fine sand) for sluice valve with C.I. surface box 100 mm top dia 160 mm bottom dia and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3(1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement and outside plaster finished rough complete as per standard design. 195 SEWERAGE 196 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressingof sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 200 m. [All kinds of soil] : (a) Pipes, cables etc. exceeding 75 mm dia but not exceeding 300 mm dia. 197 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressingof sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 200 m. [All kinds of soil] : (b)Extra over 1 (a) above for excavation over 1.5 m depth . 198 Providing PVC-U sewer pipes confirming to IS:15328 (SN -10 kN/sqcm) with elastomeric sealing ring socket joints complete in all respects: (a) 200 mm OD 199 Providing PVC-U sewer pipes confirming to IS:15328 (SN -10 kN/sqcm) with elastomeric sealing ring socket joints complete in all respects: (b) 250 mm OD 200 Providing PVC-U sewer pipes confirming to IS:15328 (SN -10 kN/sqcm) with elastomeric sealing ring socket joints complete in all respects: (c) 300 mm OD 201 Providing and laying cement concrete 1:5:10 mix (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of PVC-U pipes including bed concrete as per standard design. :(a) 200 mm OD 202 Providing and laying cement concrete 1:5:10 mix (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of PVC-U pipes including bed concrete as per standard design. (b) 250 mm OD 203 Providing and fixing square mouth S.W. gully trap grade A complete with C.I. Grating brick masonary chamber with bricks of class designation 75 and water & gas tight SFRC Cover with frame of 260x260 mm size clear opening, frame of size 390x390 mm with weight of frame to be not less than 10 Kg and cover of size 300x300 mm with weightof cover not to be not less than 9 Kg as per standard design: (a) 180X 150 mm size P type with F.P.S. bricks of class designation 75 204 Constructing brick masonary chamber for underground C.I. Inspection chamber with and bends with 75 class designation bricks in cement mortar 1:5 (1 cement: 5 fine sand) C.I. Cover with frame (light duty) 455X610 mm internal diamensions, total weight of cover with frame to be not less than 38 Kg (weight of cover 23 Kg and weight of frame 15 Kg) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 ( 1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455X610 mm and 45 cm deep for single pipe line With F.P.S. bricks 205 Extra for depth beyond 45 cm of brick masonary chamber : for 455X610 mm size : With F.P.S. bricks 206 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand)inside cement plaster 12mm thick with cement mortar1:3 ( 1 cement :3 coarse sand ) finished with floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement 3 Coarse sand: 6graded stone aggregate 40mm nominal size) and making necessary channelin cement concrete 1:2:4 ( 1cement : 2 coarse sand :4 gradedstoneaggregate 20 mm nominal size ) finished witha floating coat of neat cement all complete as per standard design: 0.91 m deep with SFRC cover and frame ( Heavy duty HD-20 gradedesignation) 560mm internal diameter conforming to IS:12592 total weightof cover and frame to be not less than 182 kg, fixed in cement concrete1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (excavation, foot rests and 12 mm thick cement plaster at the surface shall be paid seperately): with F.P.S. bricks class desigantion 75 207 Extra depth for circular type manhole 0.91 m internal dia (at bottom) with beyond 0.91 m to 1.67 m, withF.P.S. bricks class designation 75 208 DRAINAGE SYSTEM 209 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressingof sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 200 m. [All kinds of soil]: (a) Pipes, cables etc. exceeding 75 mm dia but not exceeding 300 mm dia. 210 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressingof sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 200 m. [All kinds of soil]: (b) Pipes, cables etc. exceeding 300 mm dia. 211 Providing PVC-U sewer pipes confirming to IS:15328 (SN -10 kN/sqcm) with elastomeric sealing ring socket joints complete in all respects:(a) 200 mm OD 212 Providing PVC-U sewer pipes confirming to IS:15328 (SN -10 kN/sqcm) with elastomeric sealing ring socket joints complete in all respects:(b) 250 mm OD 213 Providing PVC-U sewer pipes confirming to IS:15328 (SN -10 kN/sqcm) with elastomeric sealing ring socket joints complete in all respects:(b) 300 mm OD 214 Providing and laying cement concrete 1:5:10 mix (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of PVC-U pipes including bed concrete as per standard design.: (a) 200 mm OD 215 Providing and laying cement concrete 1:5:10 mix (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of PVC-U pipes including bed concrete as per standard design.: (b) 250 mm OD 216 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement:2 coarse sabd : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 garded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with floating coat of neat cementand making channelsin cement concrete 1:2:4 ( 1cement : 2 coarse sand :4 gradedstoneaggregate 20 mm nominal size ) neatly finished witha floating coat of neat cement all complete as per standard design. (All earthwork and plastic foot rests included): (a) Inside size 90X80 cms and 60 cms deep including SFRC cover with frame (heavy duty) 500 mm dia clear opening 217 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement:2 coarse sabd : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 garded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with floating coat of neat cementand making channelsin cement concrete 1:2:4 ( 1cement : 2 coarse sand :4 gradedstoneaggregate 20 mm nominal size ) neatly finished witha floating coat of neat cement all complete as per standard design. (All earthwork and plastic foot rests included): (b) Inside size 120X90 cms and 90 cms deep including SFRC cover with frame (Extra heavy duty) 560 mm dia clear opening. 218 Extra for additional depth of manholes: (a) Size 90X80 cms beyond 60 cms depth 219 Extra for additional depth of manholes: (b) Size 120X90 cms beyond 90 cms depth 220 Constructing brick masonary chamber for underground C.I. Inspection chamber with and bends with 75 class designation bricks in cement mortar 1:5 (1 cement: 5 fine sand) C.I. Cover with frame (light duty) 455X610 mm internal diamensions, total weight of cover with frame to be not less than 38 Kg (weight of cover 23 Kg and weight of frame 15 Kg) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 ( 1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455X610 mm and 45 cm deep for single pipe line With F.P.S. bricks 221 Constructing brick masonary road gully chamber 50X45X60 cm with bricksof class designation 75 in cement mortar 1:5 (1 cement: 5 fine sand) including 500X450 mm precast RCC horizontal grating with frame complete as per standard design:With F.P.S. bricks 222 Making connection of stormwater lines with existing municipal manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: (a) For pipes 250 to 450 mm diameter 223 FIRE FIGHTING WORKS 224 FIRE FIGHTING 225 Supply, Installation, Testing and Commisioning in trenches the following sizes of M.S. class `C (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil, refilling, ramming and removing the excavated surplus material and making good the same complete as required. Providing protection toembedded M.S pipesandfittingsbywrapping allaround 4mm thick pypkote protection including proper overlaps on joints.:(a) 80 mm dia ( 4.85mm thickness) 226 Supply, Installation, Testing and Commisioning in trenches the following sizes of M.S. class `C (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil, refilling, ramming and removing the excavated surplus material and making good the same complete as required. Providing protection toembedded M.S pipesandfittingsbywrapping allaround 4mm thick pypkote protection including proper overlaps on joints.:(b) 100 mm dia ( 5.40mm thickness) 227 Supply, Installation, Testing and Commisioning in trenches the following sizes of M.S. class `C (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil, refilling, ramming and removing the excavated surplus material and making good the same complete as required. Providing protection toembedded M.S pipesandfittingsbywrapping allaround 4mm thick pypkote protection including proper overlaps on joints.:(c) 150 mm dia ( 5.40mm thickness) 228 Supply, Installation, Testing and Commisioning of butterfly valve suitableforworking pressure 15 Kg/Sqcm.& test pressure 30kg/sqcm with flanges, nut bolts&gasketscomplete required.:(a) 100 mm dia 229 Supply, Installation, Testing and Commisioning of butterfly valve suitableforworking pressure 15 Kg/Sqcm.& test pressure 30kg/sqcm with flanges, nut bolts&gasketscomplete required.:(b) 150 mm dia 230 Supply, Installation, Testing and Commisioning of C.I. dual plate wafer type check valve suitableforworking pressureof15 Kg/Sqcm & test pressure 30kg/sqcm withflanges, Nut, bolts & washers, painting etc.completeas required.:(a) 100 mm dia 231 Supply, Installation, Testing and Commisioning of C.I. dual plate wafer type check valve suitableforworking pressureof15 Kg/Sqcm & test pressure 30kg/sqcm withflanges, Nut, bolts & washers, painting etc.completeas required.:(b) 150 mm dia 232 Supply, Installation, Testing and Commisioning of double flanged flexicon expansion joint with unit control of standard length as per maufacturers specs tested to a pressure of 30Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required.:( a) 65 mm dia 233 Supply, Installation, Testing and Commisioning of double flanged flexicon expansion joint with unit control of standard length as per maufacturers specs tested to a pressure of 30Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required.:(b) 150 mm dia 234 Supply, Installation, Testing and Commisioning ofC.I.`Y strainer with bronzeperforatedsheetbasket includingrubber gasket, flanges, nuts, bolts and washers, complete as required.: (a) 150 mm dia 235 Supply, Installation, Testing and Commisioning of SS single head fire hydrant valvewith80 mm N.B.flangedinlet, brass spindal, one no. 63 mm dia femaleinstantaneousoutlet type. G.M. coupling,blank cap, chain. Conforming to IS:5290.Includingtappingfromwet riser complete as required. 236 Supply, Installation, Testing and Commisioning ofHose pipe, 63 mm diaand15mts long, duly reinforced, rubberlined suitable forbrusting pressurenot lessthan22Kg/Sqcm. conformingtoIS 636-1988type A with gun metal heavy dutyinstantaneous type coupling ( Pairmale&femaleparts) conforming to IS 903. Complete as required. 237 Supply, Installation, Testing and Commissioning of63 mm dia instantaneouspattern branchshort SSpipe,16 mmdia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required. 238 Supply, Installation, Commisioning of standard firemans axe with heavy rubber handle. 239 Supply, Installation, Testing and Commissioning ofinletbreaching havingC.I.bodyfourway SS 63 mm diainstantaneousinlets conforming toIS 903fittedwithnon returnvalves, 25 mm diagun metal drain cock, blank cap, brasschains and 150 mm dia flanges with allaccessories suitableforlocal fire tender complete as required. 240 Supply, Installation, Testing and Commissioning ofSS Fire Brigadeadopter assemblywith150mm diaoutlet,suitableforlocalfire tender complete as required. 241 Supply, Installation, Testing and Commissioning of weather proof cabinet of size not less than0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.)suitably markedon the outside with the letters FIRE HOSE including necessary lockingarrangement and painting in red coloursuitableto accomodate, externalyard hydrant valve, 2 nos15 mtrlongHose pipe, branch pipe, nozzle and fire mans axe. It shall be mounted on boundary wall complete as required. 242 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.: Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325.: M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 70 m Head 243 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump): Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.: 2280 lpm at 70 m Head 244 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) : Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.: Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325.: M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.: Suitable cement concrete foundation duly plastered and with anti vibration pads. : 180 lpm at 70 m Head 245 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : 246 INCOMING:250A, 50kA 4 Pole MCCB, Ics=100% Icu ratingDigital Voltmeter 0-500V with selector switchDigital Ammeter (0-250 A) with selector swtich & CTs etc:LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300AOUTGOING:( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 247 Jockey Pump : 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROL 248 Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 249 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe 250 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 251 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 252 FINISHING WORK 253 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.1.2 254 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)DSR 21.1.2.2 255 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides DSR 21.2.2 256 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness: DSR 21.3.2 257 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4 mm: DSR 9.95.1 258 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm: DSR 9.96.1 259 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm: DSR 9.97.1 260 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm: DSR 9.100.1 261 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: Twin rubber stopper: DSR 9.101.2 262 Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturers specification.: Two or more coats on new work: DSR 13.42.1 263 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to its components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -inCharge. (Material shall conform to ASTM 6063). : Floor Joint of 100 mm gap: DSR 5.44.1 264 Providing and fixing of expansion joint system related with wall joint (internal / external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063.): Wall Joint of 100 mm gap:DSR 5.45.1 265 Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) : Roof Joint of 100 mm gap : DSR 5.46.1 266 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 267 CONNECTING BRIDGE 268 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer allcomplete. DSR 10.2 269 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25 270 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62 271 ROOF SKYLIGHT -18 mm THK POLYCARBONATE SHEET Supply and Installation of polycarbonate multi-layered, Multicell Xfix Connectible modular panel system for, a complete assembly of coextruded UV protected polycarbonate panels incorporated into a complete system. Standing seam polycarbonate panel system of minimum 18 mm thick (Min.) Panels with bigger width will be preferred for reducing number of joints in the roof.Panels shall be with grip lock double tooth lockingmechanism with interlocking connectible connectors running lengthwise at both sides of the panel. Panels shall be fixed on Purlins of MS tructure (will be paid Separately) with self-drilling screws and specialsTrapezoidal Heavy Duty Fastener/ Al- Cleat to ensure a pull-out load of min. 7000N (7KN) testedas per ISO 6892:1998 and IS 1608: 2005. The min width of the panel system shall be 900mm (min.). 272 Panels shall be uniform in color UV protected in combination with seven layers for required lux level, along with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels with morelayers will be preferred for better insulation and improved shading coefficient. Prices includes All accessories including Aluminum profiles with EPDM Gaskets, at alternate edges with taper cutting to achieve the required profile, aesthetics and performance criteria. U value shall not be more than 1.8 Watt/m2K as per EN ISO 1077- 2:2018 and respective third Party test certificate shall be produced before procurement. 273 Panels shall have an X cell structure also called truss bracing design to have more strength and flexibility simultaneously. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G155.Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factoryauthorized labour with supervision to complete the entire panel installation as per drawing and direction of the engineering in charge. 274 LEVELLING 275 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 6 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. SOR 2.31 276 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. SOR 2.32 277 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. SOR 2.33 278 Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.: Beyond 60 cm girth upto and including 120 cm girth: SOR 2.33.2 279 EXTERNALELECTRICAL 280 COMPACT SUB STATIONS - 01 (with OLTC) 281 Supply, Installation, testing and Commissioning of 11 kV / 0.415 KV Compact Sub Station(with OLTC)outdoor plinth mounted type designed for natural cooling having type tested equipment comprising distribution transformers, SF6 insulated VCB compact switchgear (RMU) having metal enclosed robotically sealed/welded stainless steel tank , L T Panel, interconnection between HT switchgear & Transformer using single core cables and Transformer to LT switchgear using Al bus bars/Cables factory built / ready for connection type, otherassociated equipment etc. complete as required conforming to detailed specification. 282 The enclosure shall have modular construction usingG.I. sheets and shall be painted with polyurethane paint from the exterior of approved shade. The enclosure for LT switchgear & HT switchgear shall be provided with IP54ingress protection. The transformer compartment will have IP23 ingress protection. Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each compartment.Transformer compartment door shall be interlocked with HT breaker.The transformer used shall be specially designed for low losses and shall be hermetically sealed & with corrugated tank. 283 The L T ACB shall have inbuiltmicroprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases with Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947 284 L T Panel BUS : 415 Volts, 3 phase 50 HZTPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coading and insulated by heat shrinkable sleeves and clip on shrouds for joints. The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C. The temperature rise should be restricted to 35 deg C above design ambient temperature of 50 deg C. 285 The Transformer losses should confirm to IS - 1180 Part-1 (2014) efficiency Level - 2[ 1.86 KW at 50% load & 5.3 KW at 100% load shall not exceeds by 5.0% of the maximum total loss values. 286 The combination of CSS shall be as per details below:- 287 (a) Supply of 3 way 11kV ,3Phase, 50Hz, 3 wire , earthed neutral, Indoor type floor mounted, non extensible, having hinged arc proof cable doors, breaking capacity 18.4 kA,VCB Ring Main Unit enclosed in robotically laser welded stainless steel tank having IP67 degree of protection consisting of following:- 288 (i) 1 Nos. 630Amps Fault making load breaking spring assisted SF6 Ring Switches, fitted with fixed type voltage indicator device as per IEC 61958 along with associated sensor and fault passage indicator.(ii) 2 No. 630Amps tee off spring assisted type vacuum circuit breaker unit with self powered series trip microprocessor based numericalover current and Earth faultrelay for protection, fitted with fixed type voltage indicator device as per IEC 61958, along with associated sensor and fault passage indicator and ring core type protection Current transformer along with LV compartment with Ammeter with selector switches.(iii)Air Insulated Metering panel connected along with above unit , 18.4 kA , 630 amps, having Potential transformer,connected jumpers / Bus Bar, LV Compartment to incorporate Votmeter andEnergy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI as per the requirement (at incoming VCB) (Please refer SLD). 289 (b)1 No. 11 KV/415 V, 630 KVA three phase (with %Z is 4.5%) , 50 HZ, DYn11, +10% to -10%in 2.5% equal steps ON LOADTAP CHANGER (OLTC), oil cooled, outdoor mounting type, hermitically sealed, corrugated wall design low loss transformer with Cu winding and standard fittings.(minimum 240 Sq MM HT (E) XLPE AL cable are used for the connectivity between transformer &HT Breaker) 290 LT Bus Bars : 1000 AMP,500 Volts, 3 phase 50 HZTPN. The current density of bus bar shall not exceed1.0 sqmm / Amp 291 Neutral Bus : - Separate 2 nos 32 x 6 mm Copper insulated strip (with conductivity mim 99%) directly connected from neutral point of transformer. 292 (c )Incoming cum Outgoing - 415 VoltL.T. breaker Panel having 1000 Amp FP ACB, 50 kA fixed type, with microprocessor based O/L, E/F, S/C, Inst. S/C releases with CT/PT, ammeter with ASS, Voltmeter with VSS, PF meter, Hz meter, energy enalyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI,phase indicating lamps, On/Offf/Trip indication. 630 KVA Compact Sub Station. 293 DIESEL GENERATING SET 294 Supply, Installation, testing and Commissioning ofSilent type Diesel Generating Set at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel operation / PLC based synchronization / PLC based load manager, 0.85 load factor including circuit breaker for isolation, sound proof acoustic and weather proof enclosure, residential type silencer (as per CPCB norms-2) fabricated out of CRCA sheet of 16 SWG thickness with 9 tank pretreated before powder coating with ventillation system complete in all respects comprising of the following. 295 Diesel Engine suitable for driving alternator of above rating, compression ignition, 4 stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable for above output of alternator at 40oC, 50% RH & at 210 M MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after 12 hrs of prime continuous loading, complete with all the accessories i.e. tachometer with hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting rods, electronic governing system, dynamically balanced flywheel, air intake manifold, Air cleaner, anti vibration pads, starter motor, including all other accessories required to complete the system. 296 Instrument Panel - Engine mounted Instrument Panel fitted withand having digital display for followings : 297 Start stop switch with keyWater temperature indicationLubrication oil pressure indication.Lubrication oil temperature indication.Battery charging indicationRPM indicationOver speed indicationLow Lube oil trip indicationEngine hours indication 298 Alternator- Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles, 4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 210 meter above MSL, capable of taking 10% overlioading for one hour after 12 hrs of prime continuous loading, brushless, self excited, self regulated through AVR, continuous duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H insulation, including terminal box suitable for cable termination as required. 299 Note : - Alternator should have with all other accessories as per specified in Technical specfications. 300 Base Frame - Both the engine and alternator shall be mounted on suitable base frame made of MS channel which shall be installed on cement concrete foundation and vibration isolating arrangement as per recommendations of manufacturer.Inbuilt Fuel tank ofstandard capacity complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, fuel transfer system for automatic fuel refilling system with pump, piping, valves, level indicators etc. complete.Daily service Fuel tank of990 liters capacity fabricated out of 2 mm thick MS sheet complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, provision for fuel transfer system,level indicators and all standard accessories etc. as required.Exhaust Silencer - Exhaust manifold with residential silencer.The D G set should be supplied with required hardware for external PLC based auto load management system.Starting system - 24 Volt DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with 12/24 Volts suitable nos. lead acid type batteries of suitable AH.Ventillation System - Arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per standard specifications. 301 550 KVA 302 Supply, Fixing, testing and Commissioning of Exhaust gas piping system ofClass `B MS pipe as per IS:1239 for upto 150 mm dia and for 200 mm dia & above MS pipe as per IS:3589 with welded joints, cut to required lengths with necessary bends, fittings, flanges, painting over primer coat, with mineral wool / rock wool insulation of minimum 75mm thick of 150 Kg per cu M density on all sides of exhaust pipe, with chicken mesh wrapping and 26 SWG aluminium sheet cladding complete as required. The aluminum foil should be tightly cladded to insulation surface of pipe. The aluminum cladding shall be locked with sheet metal screws with other sections of aluminium foil.The measurement shall be doneon the basis of centre line. (Stack height should be in accordance with emission regulations of CPCB, which will gowell above the top most terrace) The exhaust piping system should be suitable for upto 550oC temperature, the surface temperature of exhaust pipe shall not exceed more than 60oC. (The rates are exclusive of support structure) (Note - Final size of exhaust pipe will beconfirmed by the DG vendor after calculating the actual back pressure and submit the same to client / consultant for approval): 300 mm dia (wall thickness - 4.85 mm) (for 625 KVA DG sets) 303 Supply & fixing of SSBellow of following diameter : 300 mm dia(for 500 KVA DG sets) 304 Supply & fabrication ofD G exhaust pipe supports by M.S angle iron of size not less than 100 x 50 mm x 6/8 mm duly grouted in the wall through minimum 8 mm thick plate and with suitable MSangle / channel iron structure. The entire MS support structure should be painted by 2 coats of anti corrosive paint over primer coat of approved shade and make. The design of support to be duly approved by the Structural Consultant / Architect before fabrication and installation. 305 FUEL PIPING 306 Providing and fixing in position the following MSpipes classC (As per IS : 1239) cut to required lenghts and installed with screwed joints including providing and fixing in position the necessary fittings like elbows, tees and reducers, sockets, MS supports and accessories including digging and refilling earth where required for buried pipes / suspended from ceiling including pipe hanger / clamped from wall including hardware complete as per site requirement.: 25 mm NB MS pipes (IS: 1239, 4.0 mm thick) 307 Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valve having forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, teflon seat, screwed ends tested to a pressure of 10 kg/sqcm suitable for HSD complete.:25 mm nominal bore 308 Supply, installation, testing and commissioning of Fuel Level sensor (for Low & high level) 309 MAIN LT PANEL & SUB DISTRIBUTION PANELS 310 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings,instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete withsuitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. 311 INCOMING-800 Amp. MCCB-1 Nos.OUTGOINGS -1 nos. 200 AMPS TP MCCB. (25 KA)2 no. 100 AMPS TP MCCB. (25 KA)2 nos. 63 AMPS TP MCCB. (25 KA)1 nos. 200 AMPS TP MCCB. (25 KA) (for spare)1 nos. 100 AMPS TP MCCB. (25 KA) (for spare)1 nos. 63 AMPS TP MCCB. (25 KA) (for spare) 312 AUTOMATIC POWER FACTOR CORRECTION PANEL(CAPACITOR PANEL) 313 Supply, Installation, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type 200 KVAR A P F C Panel consisting of 5 / 10 / 15 / 20 / 25 / 50 KVAR at 415 Volts (rated voltage of bank shall be 440 Volts) capacitor units in tier formation, housed in an integrated cubicle type automatic switching ON and OFF control panel, floor mounting, dust &vermin proof, front operated construction, enclosure class - IP 52, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623All outgoings MCCBs shall be thermal-magnetic based with inbuilt O/L & S/C release.All MCCBs shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics value. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CTs, PTs, etc 314 Capacitor duty contactors should be used for switching individual capacitor banks.The fault withstanding capacity of panel & its control gear shall be min. 25 KA rms for 1 sec.Each section of capacitor panel shall have Verticle hood & exhaust fans for ventilation purpose.The capacitor panel shall be integrated with the main L T Panel as per schematic diagram 315 INCOMINGIncomer circuit breaker has been included in the main panel.1 set- 3 CTs , ratio 600/5A Class 1.0 accuracy 15 VA burden formetering.1Nos- (0-600A) digital Ammeter with selector switchMicro processor based automatic power factor control relay (3phase) (including power factor meter) in 9 steps for automaticcut off or add on capacitor units to keep the power factor at0.95 with variation of loads. All associated auxiliary contactors /relays shall be provided with in the scope of work.Phase indicating lamps with HRC fuses, and indicating in eachcapacitor chamber unit to indicate On/Off status of capacitorunit.BUS BARS600 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivityelectrolytic Aluminium bus bar with conductivity on min 57 to58% of suitable length, SMC / DMC supports, with colourcoding and insulated by heat shrinkable sleeves and clips onshrouds for joints. The current density of bus bar shall beminimum 1.0 sq mm / amp.The Maximum allowable temperature for the Bus bar to berestricted to 85 deg C. The temperature rise should berestricted to 35 deg C above ambient temperature. 316 OUTGOINGS -2 nos. of 125 AMPS TPN 25 KA MCCB and 150 amps AC3 dutycontactor with 50 KVAR heavy duty MPP type at 415 Vcapacitor bank (rated Voltage 440 Volts) , auto-manual selectorswitch, start stop push button for manual operation includingon/off indicating lamps and delay timer complete.2 nos. of 63 AMPS TPN 25 KA MCCB and 80 amps AC3 dutycontactor with 25 KVAR heavy duty MPP type at 415 Vcapacitor bank (rated Voltage 440 Volts) , auto-manual selectorswitch, start stop push button for manual operation includingon/off indicating lamps and delay timer complete.1 no. of 63 AMPS TPN 25 KA MCCB and 80 amps AC3 dutycontactor with 20 KVAR heavy duty MPP type at 415 Vcapacitor bank (rated Voltage 440 Volts) , auto-manual selectorswitch, start stop push button for manual operation includingon/off indicating lamps and delay timer complete.1 no. of 40 AMPS TPN 25 KA MCCB and 50 amps AC3 dutycontactor with 15 KVAR heavy duty MPP type at 415 Vcapacitor bank (rated Voltage 440 Volts) , auto-manual selectorswitch, start stop push button for manual operation includingon/off indicating lamps and delay timer complete.1 no. of 32 AMPS TPN 25 KA MCCB and 40 amps AC3 dutycontactor with 10 KVAR heavy duty MPP type at 415 Vcapacitor bank (rated Voltage 440 Volts) , auto-manual selectorswitch, start stop push button for manual operation includingon/off indicating lamps and delay timer complete.1 no. of 16 AMPS TPN 25 KA MCCB and 20 amps AC3 dutycontactor with 5 KVAR heavy duty MPP type at 415 V capacitorbank (rated Voltage 440 Volts) , auto-manual selector switch,start stop push button for manual operation including on/offindicating lamps and delay timer complete.1 SET 200 KVAR CAPACITOR PANEL 317 Electrical Panel-1 (Block-1)Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamberetc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.INCOMING-400 Amp. MCCB-1 Nos.OUTGOINGS -100 AMP MCCB 2 nos.63 AMP MCCB 8 nos.40 AMP MCCB 8 nos.63 AMP MCCB 1 no. (spare)40 AMP MCCB 1 no. (spare) 318 Electrical Panel-2 (Block-2)Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall beseparate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving andmounted on non hygroscopic supports such as CMC/BMCsupport withdeteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.INCOMING-200 Amp. MCCB-1 Nos.OUTGOINGS -100 AMP MCCB 2 nos.63 AMP MCCB 5 nos.40 AMP MCCB 6 nos.63 AMP MCCB 1 no. (spare)40 AMP MCCB 1 no. (spare) 319 Electrical Panel-3 (Block-3)Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and otherparameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. SOR-2018 813 (E)INCOMING-400 Amp. MCCB-1 Nos.OUTGOINGS -100 AMP MCCB 2 nos.63 AMP MCCB 8 nos.40 AMP MCCB 8 nos.63 AMP MCCB 1 no. (spare)40 AMP MCCB 1 no. (spare) 320 Electrical Panel-4 (Block-4)Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall beseparate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMCsupport with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. SOR-2018/ 812 (C)INCOMING-200 Amp. MCCB-1 Nos.OUTGOINGS -100 AMP MCCB 2 nos.63 AMP MCCB 6 nos.40 AMP MCCB 6 nos.63 AMP MCCB 1 no. (spare)40 AMP MCCB 1 no. (spare) 321 Electrical Panel-5 (Block-5)Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall beseparate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMCsupport with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. SOR-2018/813(E)INCOMING-400 Amp. MCCB-1 Nos.OUTGOINGS -100 AMP MCCB 2 nos.63 AMP MCCB 6 nos.40 AMP MCCB 6 nos.63 AMP MCCB 1 no. (spare)40 AMP MCCB 1 no. (spare) 322 Lighting Panel for Basement :Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall beseparate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMCsupport with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. SOR-2018 / 811 (C)INCOMING-100 Amp. MCCB-1 Nos.OUTGOINGS -63 AMP MCCB 2 nos.40 AMP MCCB 5 nos.63 AMP MCCB 1 no. (spare)40 AMP MCCB 1 no. (spare) 323 UPS O/G Panel:Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall beseparate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as perIS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMCsupport with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. SOR-2018/811 (C)INCOMING-100 Amp. MCCB-1 Nos.OUTGOINGS -63 AMP MCCB 2 nos.40 AMP MCCB 2 nos.40 AMP MCCB 18 no.25 AMP MCCB 18 no.40 AMP MCCB 1 no. (spare)25 AMP MCCB 1 no. (spare) 324 CO2 Gas Flooding System For Main LT PanelSupply, installation, testing and commissioning of Polymer Tube Detection based CO2 Gas Flooding System For Main LT Panel, Consisting of the following components: CO2 Cylinder, 4.5 kg capacity, complete with all necessary CO2 Gas, fittings, support and accessories, connected with Valve (with manual release facility). 325 CO2 Cylinder, 2.5 kg capacity, complete with all necessary CO2 Gas, fittings, support and accessories, connected with Valve (with manual release facility). 326 Filling adopter 327 D/I Adopter for converting the indirect valve to function as Direct System. 328 FET End of Line adapter with Pressure gauge for Automatic fireuppression tube used for fitting at the end of the tube for pressurizing and re pressurizing the tube. Fitting made by brass (plated / unplated), Stainless steel, Elastomeric Sealings, Copper Nickle plated, Temperature range TS -20 Deg C till + 60 Deg C, Maximum working pressure 25 Bars, made as per PED Pressure Equipment Directives. 329 Pressure Switch to monitor Pressure drop in the tube, switchpoint 11 Bars. 330 Flexible Polymer Detection Tube made by special modified Polyamide (PA), Color Red, High grade quality, UV Stabilized, Inner diameter 4mm, Outer Diameter 6 MM, Melting Point approx. 220 degrees Celsius when heating up with 10 K/minute, Steady load tested upto max. 80° C. The lowest operating temperature is stipulated at minus 40°C. Service Pressure 20 Bar, Burst Pressure at 20 Deg C approx 120 Bars, Release Temperature : Rapid heat increase in temperature at 20 bars pressure approx 150 Deg to 180 Deg C (Without Flame) 331 Master Control Unit for connecting each system with electronic hooters and productivity input to Scada /Fire Alarm system including all necessaries +electrical wiring to make each entire system functional.(Indeginous) 332 Containing all required fitting and fixing 333 Installation & Commissioning Charges includes complete setup of the system, Installation of Cylinders on specially designed brackets, Laying of sensor tubes using tube attachments and Cable ties, fixing end of line plugs and end of line adapters, pressurizing tube @ 15-18 Bars using Nitrogen pressurizingagent. 334 Supplying and fixing and connection of the following rating, four Pole MCCB (25 KA), 415 volts, at the incomer / outgoing in seperate enclosure, complete with connections, testing and commissioning etc. as required : 100 AMP FP MCCB (25 KA) micro processor based. 335 (VI) INVERTORSupply, installation, testing and commissioning of on lineUPS with builtin parallal redundancy, as per following detailsTechnology : Micro processor based controls, True on line,Double conversion type, should have cold start facility.Input :- (mains / local D G set compatibility)a) Voltage : 415 V / 3 Phaseb) Voltage Variation : - 20% to + 20%c) Input Frequency : 50 Hz.d) Frequency Variation : + 10%e) Automatic phase sequence correction facilityOutput :-a) Voltage : 230 V / 1 Phase, 415 V / 3 Phaseb) Voltage Variation : + 1%c) Frequency Variation : 50 Hz. + 0.1%Overall Efficiency : > 90%Charger : Should have built in charger to suit systemrequirement.Battery type : Sealed Maintenance Free - SMF (Global Yuasa /Exide)Battery Backup = 15 min.External battery backup will be usedDisplay : Should have LCD display with event logging facility.Upgradeability : Should be upgradeable to work as parallelredundant UPS in load sharing mode.Software Communication : Should have SNMP (Simple NetworkManagement Protocol) compatibilityRating : 30 KVA 336 SUB-HEAD - 1 : S/F MODULAR TYPE SWITCH / SOCKET & SUBMAINS 337 Supplying & fixing suitable size Gl box with modular plate and cover in fronton surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required.DSR 1.57 338 Wiring for circuit/ submain wiring along with earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. DSR 1.14 339 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (DSR 1.14.4) 340 2 X 16 sq. mm + 1 X 6 sq. mm earth wire(DSR 1.14.6) 341 4 X 6 sq. mm + 2 X 6 sq. mm earth wire(DSR 1.14.9) 342 4 X 10 sq. mm + 2X6 sq. mm earth wire(DSR 1.14.10) 343 SUB-HEAD - 2 : DISTRIBUTION BOARDS & CIRCUIT BREAKERS 344 S/F of surface / flush mounting SPN Distribution board with additional metal door without MCB complete in all respects as directed at site by Engineer-in-charge. a) 12 WAYS CAT A (UPSOR 1025(A) 345 S/F of surface/flush mounting TPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.. (a) 4 WAYS CAT A (UPSOR 1026 (A) 346 S/F of surface/flush mounting TPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.. 6 WAYS : CAT A (UPSOR 1027(A) 347 S/F of surface/flush mounting TPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.. : 8 WAYS: CAT A (UPSOR UPSOR 1028(A) 348 Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) : CAT A(UPSOR 1002 349 Supply & fixing of 63 Amp DP MCB (10 KA) :CAT A : UPSOR 1011 350 S/F of 63 amp FP MCB (10 K.A.) :CAT A : UPSOR 1020 (A) 351 S&F and making connection of 63A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.UPSOR 394 352 S&F and making connection of 63 Amp. 4 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge. UPSOR 398 353 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. UPSOR 1109 354 S&F single pole MCB blanking plate UPSOR 1034(B) 355 SUPPLY AND LAYING OF CABLES & ACCESSORIES 356 Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor byclamps etc UPSOR (501) 357 6 sqmm 3 core 358 10 sqmm 4 core 359 16 sqmm 4 core 360 25 sqmm 3 1/2 core 361 35 sqmm 3 1/2 core 362 50 sqmm 3 1/2 core 363 95 sqmm 3 1/2 core 364 120 sqmm 3 1/2 core 365 150 sqmm 3 1/2 core 366 185 sqmm 3 1/2 core 367 240 sqmm 3 1/2 core 368 300 sqmm 3 1/2 core 369 deduct in above item when cables is passed through G.I/M.S. or Hume pipe in road crossing or along the wall.The cost of the G.I. pipe,hume pipe is to be extra when and where required. 370 Supply fixing of plam or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections etc. complete in all respects as per direction of Engineer-in-charge (UP SOR 504) 371 6 sqmm 372 10 sqmm 373 16 sqmm 374 25 sqmm 375 35 sqmm 376 50 sqmm 377 70 sqmm 378 95 sqmm 379 120 sqmm 380 150 sqmm 381 185 sqmm 382 240 sqmm 383 300 sqmm 384 Supply and fixing brass nickle plated compression glands for PVC insulated armoured, served, sheathed cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor UPSOR 503 385 6 sqmm 3 core 386 10 sqmm 4 core 387 16 sqmm 4 core 388 25 sqmm 3 1/2 core 389 35 sqmm 3 1/2 core 390 50 sqmm 3 1/2 core 391 95 sqmm 3 1/2 core 392 120 sqmm 3 1/2 core 393 150 sqmm 3 1/2 core 394 185 sqmm 3 1/2 core 395 240 sqmm 3 1/2 core 396 300 sqmm 3 1/2 core 397 Supply of ISI marked Copper conductor PVC insulated cable as per IS 1554 armoured, served, sheathed 1100 volts grade. : 25 sqmm 1 core 398 Laying and testing of aluminium / copper conductor cable PVC / XLPE insulated armoured, served, sheathed 1100 volts grade. On surface the cable run shall be fixed by GI clamps etc. of suitable size or on existing cable tray or inside existing RCC / HDPE DWC pipe complete in all respect .The armouring of the cable shall be properly connected with the earth conductor including fixing of palm or pin type copper tin plated cable socket (lug) / end terminations to the cable leads, insulating with tape and making connections with brass / nickle plated flame proof double compression glands, providing cable tags complete in all respect upto the satisfaction of Engineer-incharge. (The supply of terminations and glands shall be under seperate item): (a) 25 sqmm 1 core 399 Supply and laying of ISI marked Copper conductor PVC insulated control cable as per IS 1554 PVC sheathed 1100 volts grade. On surface the cable run shall be fixed by GI clamps etc. of suitable size or on existing cable tray complete in all respect .The armouring of the cable shall be properly connected with the earth conductor including fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections complete in all respect including end termination, double compression glands, supply of clamps, lugs, tape etc complete upto the satisfaction of Engineer-incharge. Armoured 400 6 x 2.5 sq mm armoured (DG to Main LT panel interfacing) 401 12 x 2.5 sq mm armoured (2 runs DG controlling) 402 12 x 2.5 sq mm armoured ( For Transformer contro wiring) 403 2 x 4 sq mm armoured (for Battery charging) 404 Supply of 3 core stranded aluminium conductor 11 KV grade XLPE (E) (Cross linked Polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cable confirming to IS : 7098 (part II with latest amendments) a) 240 sq. mm 3 core 405 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV of following size in the existing masonry open duct etc. as required.a) Size exceeding 120 sq. mm. But not exceeding 400 sq. mm. 406 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. a) 240 sq. mm 3 core 407 Supplying and making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories includinglugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. a) 240 sq. mm 3 core 408 CABLE TRAY 409 Supply and erection of Perforated type cable trays made out of prefabricated Galvanized sheet steel including tees, bends, crossings, reducers, couplings to be laid in cable trenches or installed over head on wall or hanged from ceiling including all neccessary supports, brackets at every 1500 mm c/c, grouting, levelling, suspention and fixing arrangements, dash fastners, G.I. nuts & bolts complete in all respects.: The support for 1000mm, 900 mm and 750 mm wide cable tray will be by 50 x 50 x 6 mm MS angle, for 600mm and 450 mm wide cable tray will be by 40 x 40 x 5 mm MS angle, for 300mmwide cable tray will be by 32 x 32 x 5 mm MS angle, for 150mmwide cable tray will be by 25 x 25 x 4 mm MS angle. 410 900 mm (W) X 50 mm (H) X 2 mm (T) 411 750 mm (W) X 50 mm (H) X 2 mm (T) 412 600 mm (W) X 50 mm (H) X 2 mm (T) 413 450 mm (W) X 50 mm (H) X 2 mm (T) 414 300 mm (W) X 35 mm (H) X 1.5 mm (T) 415 150 mm (W) X 35 mm (H) X 1.5 mm (T) 416 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplersetc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.. 417 90 mm dia (OD-90 mm & ID-76 mm nominal) (DSR 14.16.2) 418 160 mm dia (OD-160 mm & ID-135 mm nominal) DSR 14.16.4) 419 MISCELLANEOUS ITEMS EXTERNAL ELECTRICAL 420 Providing and fixing M.V. danger notice plate of 200 mm x 150 mm made of mild steel, 2 mm thick and vitreous enamelled painting white on both sides, and with inscription in single red colour on front side as required . DSR 2.21) 421 Providing and fixing H.V. danger notice plate of 250 mm x 200 mm made of mild steel, 2 mm thick and vitreous enamelled painting white on both sides, and with inscription in single red colour on front side as required . DSR 2.22 422 S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M) UPSOR 1134 423 Supply and fixing of Fist aid box as approved by Indian red cross conforming to IS : 2217. 424 Supply of rubber gloves of 11 KV grade as per IS : 4770. 425 Supply and fixing of cable route maker as directed by Engg-incharge. UPSOR 505 426 Supply and laying of 1800 mm x 900 mm x 20 mm thick chequered rubber matting of tested quality. to withstand 30 KV dielectric strength as per IS 15652 complete in all respects. (For LT Panels) UPSOR 1136 427 Supply and laying of 1800 mm x 900 mm x 20 mm thick chequered rubber matting of tested quality to withstand 45 KV dielectric strength as per IS 15652 complete in all respects. (For 11 KV Panels) UPSOR 1136 428 Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.a) 300 mm dia. DSR 14.14.4 429 Supply and erection of pregalvanized Ladder type cable trays made out 25mm x 75mm x 25mm x 2.5mm GI Section all along (as runner) and 20mm x 30mm x 20mm x 2.5 mm GI Section (as rungs) at every 250mm interval c/c including tees, bends, crossings, reducers, couplings to be laid over head on wall or hanged from ceiling including all neccessary supports, brackets (50x50x6 MS Angle) at every 1500 mm c/c, grouting, levelling, suspention and fixing arrangements, dash fastners, G.I. nuts &bolts complete in all respects. 430 900 mm (W) X 75 mm (H) 431 750 mm (W) X 75 mm (H) 432 EARTHING 433 BODY / SAFETY EARTHING (FOR BODY OF ALL ELECTRICAL EQUIPMENTS LIKE RISING MAINS, TRANSFORMER, DG SETS,LIFTS ETC. 434 Maintenance Free Earting : - Supply of Low carbon high tensile Copper Bonded Ground rods having min 250 micron of copper coating . The diameter of Rod should be 19 mm with the length of 3000 mm . The ground rod should be UL approved and tested from CPRI. The earthing include 400 mm square C.I. frame with hinged cover, masonry housing including excavation and back filling.The Rod should be surrounded with Earth Enhance compound of 25 Kg tested as per IEC 62561-2 for the rod & IEC 62561 -7 for compound. (borh are of same manufacturer) Exothermic welding shall be used for connection between main electrode (copper bonded rod) and copper strip of size 32 x 6 mm. Further GI strips from equipments shall be connected to Copper strips by means of special bi-matellic connector (i.e. stainless steel). please refer submitted drawing. 435 Providing & fixing 25mm x 5mm G.I. strip on surface, in recess or in ground including connections etc. as required (LT Panel,Cable Trays & Elevator). DSR 5.15 436 Providing & fixing 32mm x 6mm G.I. strip on surface, in recess or in ground including connections etc. as required (Pig tail) UPSOR 717 437 Providing & fixing 50mm x 6mm G.I. strip on surface, in recess or in ground including connections etc. as required (SubstationGrid) 438 NEUTRAL EARTHING 439 Maintenance Free Earting : - Supply of Low carbon high tensile Copper Bonded Ground rods having min 250 micron of copper coating . The diameter of Rod should be 19 mm with the length of 3000 mm . The ground rod should be UL approved and tested from CPRI. The earthing include 400 mm square C.I. frame with hinged cover, masonry housing including excavation and back filling.The Rod should be surrounded with Earth Enhance compound of 25 Kg tested as per IEC 62561-2 for the rod & IEC 62561 -7 for compound.(borh are of same manufacturer) Exothermic welding shall be used for connection between main electrode (copper bonded rod) and copper strip of size 32 x 6mm. please refer submitted drawing. 440 Providing & fixing 32mm x 6mm insulated Copper strip on surface, in recess or in ground including connections etc. asrequired. 441 SOLAR PLANT 442 ON-Line Solar Photovoltaic system plant including suitable rating Poly crystalline Silicon PV Modules having a efficiency of minimum 15% (without any power export arrangement), String combiner box, DC Distribution board etc. complete as required. Scope of work also includes supply, installation of GI structure, (80 micron) in suitable section complete with all accessories and hardware including civil work as required at site for mounting PV panels.: 15 kWp SET 170 415 V, 3 phase, 50 Hz AC power string inverter (Grid intractive) with stand & all protection and controls having overall efficeiency of not less than 95%. : 15 kWp (nominal) SET 171 AC distribution board made of 2 mm CRCA sheet, power coated having IP55 degree of protection (for indoor installation) for terminating 415 V, 3 phase, 50 Hz power suppled from inverter complete height with following multifunction: - Digital multifunction meter (EM 6400 of Schnieder or equal) - 40 Amp TPN MCB (10 KA) - Phase indicating lamps. SET 1Lighting Arrestor SET 1Surge Protector SET 1 443 STREET / EXTERNAL LIGHTING 444 Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(UPSOR 653) 445 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.Category AAA (UPSOR 1455) 446 Supply and fixingof LED Street light Fitting having die cast aluminium body and diffuserwith driver set suitable for 45 watt to 50 Watt. Confirmingto IP 65 and above protectioncomplete in all respect.Category AAA (UPSOR 1443) 447 Supply and fixingof 3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminiumbody with drive set . Confirming to IP 65 and above Protection complete in all respect.Category AAA (UPSOR) MR 448 Supply and fixingof 3 Watt to 4 Watt LED Spot/Spike light Confirming to IP 65 and above Protection complete in all respect. Category AAA (UPSOR 1441) 449 Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 and above protection complete in all respect.Category AAA 450 Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation,excavation & back filling and Required T&P completee in all respect. 451 Supply installation, testing and commissioning of 3x2.5 sqmm flexible fire retardant copper connecting wire of required length from MCB in cable junction box of pole to luminaire along with MCB & Connector complete as required. 452 Supply & burrying of 40 mm dia x 4.50 m long G.I. pipe vertically for earthing having 12 mm dia holes spaced 75 mm apart drilled upto 2 meter brom the bottom complete with one earthing lead of no. 6 to 8 SWG G.I.wire in 15 mm dia. GI pipe upto switch board (from apron to switch mm dia. GI pipe upto switchboard (from apron to switch board the cost of GI pipe & GI wire will be extra), 300 mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect. 453 Supply & burrying of 600mm x 600 mm x 6.0 mm G.I. plate, vertically for pole earthing with its top at least 3 m below ground level complete 20mm dia. G. I. pipe and funnel for watering and one earthing lead of no. 8 to 10 SWG G.I.wire in 15 mm dia. GI pipe upto switch board (from apron to switch mm dia. GI pipe upto switch board (from apron to switch board the cost of GI pipe & GI wire will be extra) 300 mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . 454 Supplying & Laying of one number 8 SWG G. I. wire in 15 mm. dia. G. I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P and other material required for proper completion of the work as directed at site. 455 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 456 INCOMER : 457 f (ii) 40 AMP TPN MCB (10 KA) 458 e (ii) 25 AMP TPN MCB (10 KA) 459 OUT GOINGS : 460 4 nos. 6-32 AMP DP MCB (10 KA) 461 24 nos. 6-32 AMP DP MCB (10 KA) 462 Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade. 10 sqmm 3 core 463 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Size not exceeding 35 sq. mm. 464 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. Size not exceeding 35 sq. mm. 465 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe etc. as required. Size not exceeding 35 sq. mm. 466 Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. e) 6 sqmm 3 core 467 Deduct in above item when cables is passed through G.I/M.S. or Hume pipe in road crossing or along the wall.The cost of the G.I. pipe,hume pipe is to be extra when and where required.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
19.
Drinking Water Supply and Sanitation #9460338 Technical Bid
Tender For Baragaon Nagar Panchayat Reorganization Water Supply Scheme Under Amrit 2.0; CIVIL WORK Pump House 2 Supply of all materials labour for Construction of Pumphouse (3.60 x 3.00 x 3.00 M) CUM Chloronating Room (2.80 x 1.50 x 3.00 M) Including all material labour t&p etc Complete as per design & drawing. As per type design of Jal Nigam as per direction of engineer incharge. 3 Supply of all materials labour for Construction of Additional Dozer Room at every zone for DMA (2..50 x 3.00 x 4.00 M) Including all material labour t&p etc Complete as per design & drawing. as per direction of engineer incharge 4 Supply of all materials labour for Construction ofMCS Room (8.00 x 5.00 x 4.00 M) Including all material labour t&p etc Complete as per design & drawing. as per direction of engineer incharge 5 RISING MAIN FOR ZONE 1 AND 2& BYE-PASS ARRANGEMENT 6 Supply of the following sizes of D.I. pipes Class K-9 conforming to latest I.S. 8329/2000 complete in all respect F.O.R. destination including all taxes and insurance including speials. 7 150 mm DI K-9 8 Supply of the following sizes of C.I. Double flanged sluice valves as per I.S. 780/1960 for testing 10kg/Sqcm F.O.R Destination including all taxes and Insurance. 9 150 mm. dia. 10 Excavation in ordinary soil (lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 10 KM from the center of the foundation trenches.as per direction of engineer incharge 11 Excavation for pipe line in all type of rock by chieselling /blastingincluding supply ofblasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within10 KM.as per direction of engineer incharge 12 Carting from the store (up to 8 Km.) The following sizes of D.I. double pipe K-9 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. 13 150 mm. dia. 14 Carting of D/F Sluice valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. 15 150 mm. dia. 16 Supply of all materials, labour T&P etc. required and construct masonry type sluice valves chamber as per type design including supply and materials labour, T&P etc. complete. 17 Supply of all materials, labour, T & P etc. required and construct thrust blocks in RCC 1:2:4 at the bends and below the Valves. 18 Dismantling and reinstatement of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. as per direction of engineer incharge 19 BITUMINOUS ROAD 20 C.C. ROAD 21 Renovation of O.H.T. :- Dismantiling of OHT Flooring , Removing weak concrete hacked, roughended and clean thoroughly of OHT Coloumn for strenthening of OHT Coloumn M S or Iron Work in Plain work Supply of Aporxy resin for Old surface to joint new surface of cement concrete.Jacketing of Cement Concrete 1:1:5:3 Coment Course Sand, Stone Grit Thickness 60 mm Around old coloumn in OHT Including labour T&P etc complete.Construction of RCC foundation of Coloumn Pedestal with 1:1:5:3 cement concrete Dismantling of inner portion old plaster including disposal of malba (vertical wall, cone wall, bottom dome and top dome ).Repairing of Railing of Stair and Balcony with 20mm GI Pipe including changing of old pipe and reflexing new pipe, 12 mm thick Plaster 1:3 Cement and Course sand andwater Proofing Coumpond Chemical over the tank intenal wall and bottom dome to remove the leakage and seepage of tank(vertical wall, cone wall, bottom dome and top dome ). Changing of old & Damaged manhole cover including its fixing Scafoldingfor repairing & Painting of OHT, Dismantling/ Fixing of Inlet, Outlet, Over Flow washout pipe of OHT ,Changing of inlet outlet and washout unserviceable DI Pipe including dismantiling of old pipeand fixing of new pipe 40mm thick PCC (1:2:4) flooring with cement coarse sand and 20mm gauge stone ballast laid in pannels finished with 3mm thick floating coat of neat cement over base concrete 75mm thick consisting of cement, local sand 40mm brick ballast in 1:4:8 including Painting two coats of approved paint Apex Ultima or varnish including supply of all materials, labour and T&P etc required for Proper completion of the work in OHT. as per direction of engineer incharge 22 Design & Supply of all materials, T&P etc required for construction of specified capacity OHT with specified stagingas per following requirements:- 23 Capacity-As Specified in Item No 1.1 to 1.12Grading of OHT- M--35 The food grade epoxy coating of FOSROC / CIEBA GAIKI or reputated brand on the all inside surface area of water container after treatment of water tightness.Stair case- Seperate two column basedRCC staircase and 1 m wide balcony with box type RCC structure at the entrance of the staircase to protect the entry of unwanted persons & locking arrangement with MS door.Railings- 20 mm dia G.I. Pipe (medium quality steel tubes as per IS 1239) railing consisting of 3 rows of with posts height (50x50x6 mm MS angle) (1.0 m) of same pipe around stair case (both sides), balcony & at the top dome periphery, including epoxy 3mm thick coating above base coat, 65mm dia GI pipe (medium quality steel tubes as per IS 1239) ladder with FRP coating from opening of top dome to inside the tank and top of bottom dome. Supply and fixing of CI man hole cover with locking device at opening on the top dome to go inside the tank. Ventilator and Water level indicator - RCC ventilator with SS grill (10 sqm at the spacing of 30 mm) with steel mosquito mesh,electronic digitalwater level indicator with ultrasonic sensor including supply & fixing of solar energy arrangements. Lightening conductor- A good quality lightening conductor covered with PVC casing Vertical pipes- Inlet Pipe - 150 mm, outlet pipe - 250 mm, overflow - 150 mm & washout pipe - 100 mmC.I. D/F pipe as per design criteria upto 1 m beyond the apron, IVC/Kirloskar sluice valve on inlet, out let & at wash out pipe, duck foot bend, puddle collers and bell mouths. 10 mm thick & 150 mm wide S S plate clamp for fixing of verticle pipes with RCC columns (minimum 2 clamps between ends of each pipe). It also includes bye pass arrangement of OHT. The velocity in the pipes shall not exceed 1.5 m/sFlooring, Apron & Drain- 100 mm thick PCC of 1:2:4 & 100 mm thick CC of 1:1:2 with 6 mm thick glass strips not more than 1 sqm area upto 2 m from outer edge of the columns of OHT, drain of size 200 mm x 200 mm with 150 mm thick CC of 1:1:2 including necessary sluice valve chambers and pipe line required for proper drainage of rain water from the campus.Sluice valve chambers- 3 nos. of sluice valve chamber (minimum size 1.5 x 1.5 x 1.5 m or larger size as per requirements of site) of brick work with 200 mm thick RCC slab..Sluice valve chambers- 3 nos. of sluice valve chamber (minimum size 1.5 x 1.5 x 1.5 m or larger size as per requirements of site) of brick work with 200 mm thick RCC slab.Two coat apex painting over one coat primer of approved colour of asian / berger paints after fixing of RCC surface with grinder, repair of minor holes, unevenness etc. proper completion of work.Soil bearing capacity- Structure shall be design on the basis of maximum bearing capacity of 8 tonne/sqm or minimum as per actual on the basis of test report of soil bearing capacity. as per direction of engineer incharge 24 Sub Zone of Proposed OHT 18 m Staging ( Including 1m made of Gl or as per site condition ) 25 Proposed OHT Zone-II 400 kl Capacity and 18 m Staging 26 Cost of Testing for bearing capacity of soil for various sites of proposed OHT 27 DISTRIBUTION SYSTEM 28 Supply of following sizes D.I. K-7 pipes,as per I.S.- 8329/2000 or its Latest ammenmendsuitable for pipe with rubber gasket, coupling, coupler, including supply of specials DI DF/DI DS like Tees, Vertical / Horizontal Bend, Gap Pieces required for case of sectional testing etc and making S/S joints all materials T&P etc. all complete. as per I.S. F.O.R. destination including all local cartage etc complete.. ( Rising main Purpose ) 29 250 mm dia D.I.K-7 30 200 mm dia D.I K-7 31 Supply of the following HDPE Pipes as per B.I.S. code no. 4984/2016 or its latest amendment including cost of 1 HDPE coupler per pipe length and all bend , reducer, tee and all type of spacial which are required in Electro fusion joint fitting inclusive of all taxes and duties, 3rd party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges etc. F.O.R. destination etc. complete 32 180 mm dia HDPE PN10/PE100 33 160 mm dia HDPE PN10/PE100 34 140 mm dia HDPE PN10/PE100 35 110 mm dia HDPE PN10/PE100 36 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 37 250 mm dia 38 200 mm dia 39 150 mm dia 40 100 mm dia 41 Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance. 42 80 mm dia 43 Supply of 50 mm dia screwed down type air valve with gun metal seat at site stone including all taxes. 44 Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to IS.369/1995 at site including all taxes. 45 Excavation for pipe line work in ordinary soil(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 10 KM from the center of the foundation trenches. as per direction of engineer incharge 46 Excavation for pipe line in all type of rock by chieselling /blastingincluding supply ofblasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 10 KMas per direction of engineer incharge 47 Dismantling and reinstatement of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. as per direction of engineer incharge 48 INTERLOCKING ROAD 49 BITUMINOUS ROAD 50 C.C. ROAD 51 Carting from store (upto 8 Km) the following sizes of D.1. Pipes (class K-9) and AC pipes (class-15) and specials to the site of work, lowering them in to trenches and taying true to alignment and gradient including testing of pipeline D.I. (K-9) pipes 52 250 mm dia D.I.K-7 53 200 mm dia D.I K-7 54 Carting of following pipes, specials and fittings from site store to site of work, lowering them into trenches, laying true to alignment and gradient, laying and jointing with electro fusion fitting of pipe line including cutting of pipe for making up lengths as required for proper completion of work. 55 180 mm dia HDPE PN10/PE100 56 160 mm dia HDPE PN10/PE100 57 140 mm dia HDPE PN10/PE100 58 110 mm dia HDPE PN10/PE100 59 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 60 250 mm dia 61 200 mm dia 62 150 mm dia 63 100 mm dia 64 Carting of scour valves to the site of workslowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 65 80 mm dia 66 Carting of 50 mm dia screwed down air valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 67 Carting of 80 mm dia flanges fire hydrant of the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 68 Supply of all materials, labour T&P etc. required and construct masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete. 69 Masonry type 70 Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 71 Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 72 Construction of thurst block in RCC 1:2:4 at bends & Tee in feeder main to DMAsincluding supply of all labour, material, T&P etc. complete as per the details given below :-No. of DMAs - 4Total no. of bends & Tee - 120 (considering 3 no. bends & Tee in each DMA)Qty. of concrete - 120 x 0.5 cum = 60 cum. (considering 0.5 cum concrete at each bend) 73 Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 74 Brick masonry in cement mortar 1:4 75 12mm thick plaster in cement mortar 1:4 76 Providing and laying in position reinforced cement concrete (mix 1:1.5:3)including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material (Providing nominal reinforcement @ 0.15% of above itemincluding cutting bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (including cost of binding wire and MS Bar)) and labour, tools and plants required with transportation, loading, unloading,etc., complete for all leads and lifts etc required for proper completion of the work. 77 Provision for crossing of Nalas (0.5mto 2.0 m width) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain. 78 0.3 - 0.5 m 79 0.5 - 1.0 m 80 1.0 - 1.5 m 81 1.5 - 2.0 m 82 Making House Connection in Distribution main including Dismantling of Road, Supply, carting of Specials lowering them into trenches, fixing them including bailing out of water necessary labour, T&P etc. required for proper completion of worksas per direction of engineer incharge 83 250 mm dia D.I.K-7 84 200 mm dia D.I K-7 85 180 mm dia HDPE PN10/PE100 86 160 mm dia HDPE PN10/PE100 87 140 mm dia HDPE PN10/PE100 88 110 mm dia HDPE PN10/PE100 89 Provision of Shifting water house hold connection. 90 For140 mmto 160 mm dia 91 For110 mm dia 92 Barricading of pipe line trenches by using 2 m high hard MS barricading board 2.5x2.0 M, with red flags, Glow-caution boards, diversion boards & red lights. 93 BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD 94 Construction of compound wall comprising of RCC Columns @ 3.0 m c/c distance with beam at plinth and top, brick work in 1:4 of as per type design including supply of all material, labour, T& P etc complete ( 2m height above plinth level 230 mm thick brick wall )as per direction of engineer incharge 95 Supply and fixing 3.60 m wide MS main gate & 1.0 m wide a wicket gate with RCC Columns as per type design & drawing including primer and painting, meterial, labour, T&P etc all complete, as per direction of engineer incharge 96 Supply and Carting of additional earth required to fill up the site to the required formation level At Zone -I and At Zone -II including leveling dressing ramming with proper compection work completed. as per direction of engineer incharge 97 Provide all materials, labour T&P etc. required for proper completion of work and construction of interlocking approach road in water works campous. At Zone -I and At Zone -IIas per direction of engineer incharge 98 Construction of 250X250 mm size drain at W/W sites At Zone -I and At Zone -IIas per direction of engineer incharge 99 GENERAL RESIDENTIAL QUARTERS 100 Construction of staff quarters (1 G.F) including other miscellaneous works. The plinth area of each staff quarter is 57.706 sqm. As per jal nigam type designas per direction of engineer incharge 101 construction ofStaff Quarter at Zone-I 102 construction ofStaff Quarter at Zone-II 103 E AND M WORKS 104 CONSTRUCTION OF NEW TUBEWELL (ZONE-1) 105 Resistivity and hydrological Survey 106 Transportation from store: 107 Transportation, Erection, Dismantiling of DC/RC/DTH Rig machine 108 Transportation, Erection, Dismantiling of 150 PSI Compressor 109 Transportation, Erection, Dismantiling of 1 Cusec / 3 Cusec OP Unit and Yield test 110 Drilling of Tube well bore : 111 Drilling and reaming of 600mm dia bore from GL to 60 m BGL by DC method 112 Bentonyte Powder Bags 113 Tube Well Assembly : 114 M.S. Tubewell Assembly with all required parts like planin pipe, slotted pipe, rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. 115 300mm dia M.S.E.R.W. houseing plain pipe of wall thickness 7.1 mm. 116 Lowering of Tube well Assembly 117 Electrical logging of the bore 118 Lowering of 300mm. Dia M.S. housing pipe G.L. to 59 mtr. BGL 119 Supply of 1.6 to 4.8mm size pea gravel and shrouding of tube well 120 Development of Tube well 121 By Air Compressor 122 Development of Tube well by 150 PSI capacity air compressor 123 By Over Pumping Unit 124 Development of Tube well by OP Unit 125 Chemical & Bacteriological test of water 126 PUMPING MACHINARY TO FEED 400 KL OHT (ZONE-1) 127 SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1000LPM , 61 m Head , 2900RPM, 25 H.P) 128 SITC of Main piping & Valves with 24 mtr. Column pipe, Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 150 mm dia 129 TOOLS (REPUTED MAKE ) IN A TOOL KIT - 1 Set1. Pipe wrenches - 2 No.2. D/E Spanner 22/6 mm - 6 Pcs3. Adjustable wrench 300 mm- 1No.4. Screw driver5. 250 mm- 1No.6. 200 mm - 1No.7. 150 mm- 1No.8. Combination pliers 200 mm- 1No.9. Nose pliers 150 mm - 1No.10.hammer with handle 1 kg.- 1No.11. Line tester (Taparia make)- 1No. 130 SITC of Soft Starter with RS 485 Port- 400 V Class, 18.5 KW, Rating 131 SITC of Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank. ( SCADA Compatible ) 132 SITC of Motor Operated Actuator with Sluice Valve - 150 mm size 133 SITC of CE/UL Certified Electromagnetic Flowmeter-150 mm size 134 SITC of Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable 135 SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1) 136 125 Amp Rating 137 ElectricalWorksfor Zone-1 138 Electrical System ( For Tubewell ) 139 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of 01 tubewell as follows:- 140 Indoor Lighting 141 Surface Mounting 142 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 143 Suspended Mounting / Surface Mounting 144 36W LED light fixture 2×2 with acrylic / prismatic front cover. 145 Outdoor Lighting 146 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 147 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW & MCS 148 Complete wiring of Pump house with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 149 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 150 Electrical System ( MCS ) 151 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of MCS as follows:- 152 Indoor Lighting 153 Surface Mounting 154 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 155 Suspended Mounting / Surface Mounting 156 36W LED light fixture 2×2 with acrylic / prismatic front cover. 157 Providing & Fixing of Heavy duty capacitor start, copper wind Double ball bearing 900/1400 RPM single phase Exhaust fan as per PWD specification for electrical Works, conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required.(For MCS) 158 450mm sweep (900/1400 RPM) 159 Outdoor Lighting 160 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 161 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW & MCS 162 Complete wiring of MCS with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 163 Instrumentation Worksfor Zone-1 164 Automation of Proposed OHT ( 400 KL ) with DMA 165 Supply of Motor operated actuator without sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater without sluice valve (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 166 250 mm dia 167 Supply of flow control valve with electric actuator for flow controling,pressure monitoring and web based with cable PLC etc Complete at DMA inlet. 168 200 mm 169 Supply of dismantling joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet. 170 200 mm 171 Supply of CE/UL Certified level transmitter for OHT :- Supply of Radartype leveltransmitter with CEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 172 Supply of CE/UL Certified Electromagnetic flow meter at DMA inlet :- SupplyofCE/ULFullBore ElectromagneticFlowMeterofapproved make for remote placesof following dia and specificationscomplete:Media: Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel. 173 200 mm dia 174 Supply of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 175 Supply of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) 176 Supply of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator andgives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must beprovided to avoid maintenance. IP 65 Nema 4 housing protection class required. 177 Installation, cabling of OHT including all equipments with all power and control cable,testingand commissioning complete in all respect. 178 Master Control Station (MCS) 179 CE & BIS approved manufacturers industrial grade LCD monitor with latest configuration as per specification of size 65 180 Desktop/PC as per spec. mentioned 181 CE/UL approved manufacturers 5 KVA UPS with batteries as spec. mentioned for Computer as per requirement 182 Full development version of required TAGS SCADA Software with customization of software for MCS as per requirement as per specification mentioned. 183 CE & UL approved manufacturers control room PLC with CPU & power supply at MCS in IP65 enclosure as per spec. mentioned 184 CE/UL certified field gateway agent for transfering data from MCS to control room 185 GSM based wireless / broadband/Equipment communication system for PLC capable to transfer and gather data from remote sites to control stations, including all accessories complete 186 CE/UL approved manufacturers Firewall for network protection 187 Lightning surge protector for ethernet communication protection 188 CE/UL approved manufacturers industrial grade ethernet switch 189 Mobile App facility system architecture complete. 190 Canon/HP 1018/equivalent Laser printer 191 Security Survelliance IP camera 192 Installation, testing and commissioning with required furniture,Air Conditioner etc 193 Automation of Tubewells (Zone-1) 194 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 195 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 196 CE & UL certified Inteligent Smart Energy Meter 197 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 198 CE & UL certified pressure transmitter 199 CE & UL certified Surge protector for above control panel 200 CE/UL approved manufacturers 3 KVA UPS with batteries as spec. mentioned for Computer as per requirement 201 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 202 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT both. 203 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 204 Installation, commissioning & testing for tubewells 205 AUTOMATION OF DMA (ZONE-1) 206 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit withCPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 207 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 208 CE/UL Certified Intelligent energy meters 209 CE/UL Certified Surge protector for control panel 210 CE/UL Certified 1 KVA UPS with batteries as per technical bid documents 211 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 212 Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments 213 Cable 214 (i) Complete cabling 215 Security Survelliance IP Camera with recorder (optional) 216 Installation, commissioning & testing 217 CONSTRUCTION OF NEW TUBEWELL ( ZONE-2) 218 Resistivity and hydrological Survey 219 Transportation from store: 220 Transportation, Erection, Dismantiling of DC/RC/DTH Rig machine 221 Transportation, Erection, Dismantiling of 150 PSI Compressor 222 Transportation, Erection, Dismantiling of 1 Cusec / 3 Cusec OP Unit and Yield test 223 Drilling of Tube well bore : 224 Drilling and reaming of 600mm dia bore from GL to 60 m BGL by DC method 225 Bentonyte Powder Bags 226 Tube Well Assembly : 227 M.S. Tubewell Assembly with all required parts like planin pipe, slotted pipe, rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. 228 300mm dia M.S.E.R.W. houseing plain pipe of wall thickness 7.1 mm. 229 Lowering of Tube well Assembly 230 Electrical logging of the bore 231 Lowering of 300mm. Dia M.S. housing pipe G.L. to 59 mtr. BGL 232 Supply of 1.6 to 4.8mm size pea gravel and shrouding of tube well 233 Development of Tube well 234 By Air Compressor 235 Development of Tube well by 150 PSI capacity air compressor 236 By Over Pumping Unit 237 Development of Tube well by OP Unit 238 Chemical & Bacteriological test of water 239 PUMPING MACHINARY TO FEED 450 KL OHT (ZONE-2) 240 SITC of Pumping Plant including , panel, cable, complete in all respect with all required material T&P labour etc. (1000LPM , 61 m Head , 2900RPM, 25H.P) 241 SITC of Main piping & Valves with 24 mtr. Column pipe, Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 150 mm dia 242 TOOLS (REPUTED MAKE ) IN A TOOL KIT1. Pipe wrenches - 2 No.2. D/E Spanner 22/6 mm - 6 Pcs3. Adjustable wrench 300 mm - 1 No.4. Screw driver5. 250 mm - 1 No.6. 200 mm- 1 No.7. 150 mm - 1 No.8. Combination pliers 200 mm - 1 No.9. Nose pliers 150 mm - 1 No.10. hammer with handle 1 kg. - 1 No. 243 SITC of Soft Starter with RS 485 Port- 400 V Class, 18.5 KW, Rating 244 SITC of Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank. ( SCADA Compatible ) 245 SITC of Motor Operated Actuator with Sluice Valve - 150 mm size 246 SITC of CE/UL Certified Electromagnetic Flowmeter-150 mm size 247 SITC of Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable 248 SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1) 249 125 Amp Rating 250 Electrical Worksfor Zone-2 251 Electrical System ( For Tubewell ) 252 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of 01 tubewell as follows:- 253 Indoor Lighting 254 Surface Mounting 255 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 256 Suspended Mounting / Surface Mounting 257 36W LED light fixture 2×2 with acrylic / prismatic front cover. 258 Outdoor Lighting 259 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 260 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW 261 Complete wiring of Pump house with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 262 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 263 Instrumentation Worksfor Zone-2 264 Automation of Proposed OHT ( 450 KL ) with DMA - Zone-2 265 Supply of Motor operated actuator without sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater without sluice valve (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 266 250 mm dia 267 Supply of flow control valve with electric actuator for flow controling,pressure monitoring and web based with cable PLC etc Complete at DMA inlet. 268 200 mm 269 Supply of dismantling joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet. 270 200 mm 271 Supply of CE/UL Certified level transmitter for OHT :- Supply of Radartype leveltransmitter with CEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 272 Supply of CE/UL Certified Electromagnetic flow meter at DMA inlet :- SupplyofCE/ULFullBore ElectromagneticFlowMeterofapproved make for remote placesof following dia and specificationscomplete:Media: Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel. 273 200 mm dia 274 Supply of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 275 Supply of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) 276 Supply of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator andgives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must beprovided to avoid maintenance. IP 65 Nema 4 housing protection class required. 277 Installation, cabling of OHT including all equipments with all power and control cable,testingand commissioning complete in all respect. 278 Automation of Tubewells (Zone-1) 279 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 280 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 281 CE & UL certified Inteligent Smart Energy Meter 282 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 283 CE & UL certified pressure transmitter 284 CE & UL certified Surge protector for above control panel 285 CE/UL approved manufacturers 3 KVA UPS with batteries as spec. mentioned for Computer as per requirement 286 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 287 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT both. 288 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 289 Installation, commissioning & testing for tubewells 290 AUTOMATION OF DMA (ZONE-2) 291 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit withCPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 292 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 293 CE/UL Certified Intelligent energy meters 294 CE/UL Certified Surge protector for control panel 295 CE/UL Certified 1 KVA UPS with batteries as per technical bid documents 296 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 297 Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments 298 Cable 299 (i) Complete cabling 300 Security Survelliance IP Camera with recorder (optional) 301 Installation, commissioning & testing 302 TRAIL & RUN (Without Electricity) for03 Months Trial & Run for Zone-1,2
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
20.
Drinking Water Supply and Sanitation #9460337 Technical Bid
tender for Baruasagarnagar Palikaparishad Reorganization Water Supply Scheme Under Amrut 2.0 Survey Soil Investigation Design Supply Of All Materials Labour Tandp Etc Required For Construction Erection Completion Testing And Commissioning Of Water Supply Works Such As Wtp Rcc Oht Zps Cwr Cum Pumping Station Rising Main Feeder Main, BARUASAGAR NAGAR PALIKA PARISHAD REORGANIZATION WATER SUPPLY SCHEME UNDER- AMRUT 2.0, DISTT. JHANSI Sl. No. Item Description 1 CIVIL WORK 2 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for Design and Drawing, Supply of all materials, labour, T&P etc. required for construction,of specified capacity (3.6MLD) of WTP based on 20 Hrs. operation (3.6MLD + 25%) extra over loading capacity includinginlet chamber, aeration fountain / cascade, inlet channels including mechanical/manual fine/coarse screens, flash mixer, mixing channel with Parshall flume and flow measuring arrangement, clariflocculator with conventional, filter house and filter plant including back wash tank and back wash pumps with 100% standby, chemical house, coagulant feed tank with feed mechanism, poly aluminium chloride (PAC) or other coagulant tank of specified capacity and nos. with mixing and dosing arrangement complete, vacuum feed gas chlorinator with 100% standby, sludge handling unit and recycling of collected water from sludge etc. complete,All WTP scada Opratedexternal and internal electrification, laboratory building with all specified lab equipment, admin building, Quarter (One no.), sanitary block with necessary water supply and drainage arrangement, campus roads, landscaping and other campus development works, rain water harvesting, etc. all required works complete as per the direction of Engineer-in-Charge.The WTP shall be fully automatic based on PLC/SCADA with real time remote monitoring system and online contineuous effluent monitoring system. 3 For water works compound Construction of Bituminious approach road including preparation of subgrade. 4 Earth filling inside the water works campus. 5 Cutting of bushes, removing garbage form w/w site and dewatering of sub soil water at wtp & including maintinance of existingintake well Painting of intake well and existing water works campus 6 CONSTRUCTION OF SUMP-CUM-CLEAR WATER RESERVOIR-CUM-PUMP HOUSE OF 250 KL CAPACITY AT ZONE-3WATER WORKS CAMPUS (CWR) 7 RCC CWR;Detailed Survey, Design and Drawing, supply of all material, labour, T&P etc. required for construction of250 KL Ractangular, R.C.C Clear Water Reservoir cum pump house including various works like 1 m wide stair case with stainless steel hand railing to go inside reservoir, sump below the pump house area, stainless steel railing over the R.C.C slab of reservoir, Granular texture finish on exterior surface of pump house, gantry beam, food grade epoxy coating of FOSROC / Ciba-Geigy or reputated brand on inside surface area of water container after testing for water tightness, kota ston floring,bypass arangment ,and soil testing for Bearing capacity of capacity mentioned as under:Note : The bid prices of Clear Water Reservoir / Pumping Stations are to be submitted considering the depth of excavation may extend up to 6 m BGL. Design and Drawing approved by competent authority and Design vetted by Reputed Govt. Engineering College.(250 KL capecity) 8 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction, Construction ofLT Panel Room (RCC Frame Structure) as per type design (5m x 5m x 4 m) 9 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction, Construction ofMeterRoom (RCC Frame Structure) as per type design (4m x 4m x 4 m) 10 Estimate of RCC OverHead Tank of 450 KL. Capacity / 22 M. Staging FOR ZONE -3 Barua Sagar 11 450 KL 22 M Staging Survey Design , drawing and Supply of all materials, labour and T&P etc. complete for the construction of OHT of 450 KL. capacity and staging 22 M with 1.00 m. wide P.C.C. appron all around with 15 cm. Semi circular P.C.C. drain, 1 m. wide RCC stair case from ground level upto balcony, M.S. Ladder with hand rails on both sides from balcony to top dome and inside the tank, 1 m wide RCC balcony alround the tank wall with proper railings of 20 mm. dia. medium quality G.I. pipes in 3 rows on both sides of staircase, balcony and at the top of domes and at each landing supported on RCC posts spaced at not more than 1.50 m. intervals, proper ventilators at top, electronic water level indicator with invertor, Lightening conductor as per latest I.S. code or electricity rules, 600 mm. dia. medium pattern C.I. Manhole cover hinged with locking arrangement, fixing and jointing vertical DID/F pipes, specials and duck foot bends of required size for Inlet, outlet, fixing of outlet sluice valve and washout sluice valves with all jointing materials for proper completion and other appurtenant works, including excavation in all type of soils, painting on exposed surface with one coat of primer and two coats of approved weather coat paint, painting of vertical pipes and railings with approved anticorrosive paints and also including testing of the Overhead Tank, including following items : Supply of following sizes of DID/F pipes conforming to IS 8329 / 2000 or its latest amendment upto rail head including all taxes, duties, insurance etc. Inlet pipe 250 mm. dia.,Outlet pipe 300 mm. dia.,Overflow pipe 300 mm. dia.Washout pipe 100 mm. dia.Carting of above size DI K-9 of pipes upto site of works and lowering them into the trenches and laying true to alignment and gradient and jointing of pipes complete ( including testing of pipelines and cutting of pipes for making up the length excluding the cost of trenches. ) Inlet pipe 350 mm. dia. Outlet pipe 400 mm. dia. Overflow pipe 300 mm. dia. Washout pipe 100 mm. dia . Supply of following diameter ISI Mark Sluice Valve conforming to IS 780/ 1984 or its latest amendment of standard make ( Kirloskar or IVC make ) including all taxes etc. and carting, loading and uploading upto departmental store and carting of following fittings / specials to the site of work, lowering them into the trenches, fixing in position and jointing them with pipe lines, fixing in position and jointing them with pipelines and testing etc. complete including supply of all jointing materials. 400 mm. dia. ( In outlet pipe )100 mm. dia. ( In washout pipe ) Supply of all materials, labours, T&P etc. all complete to construct sluice valve chamber of following sizes.For Outlet Pipe For Washout Pipe Provision for the disposal of overflow water, washout water from chambers to nearest suitable point of disposal including supply of pipes, its laying, jointing, excavation and protection works at the point of disposal. including Provision for soil testing. 12 DISTRIBUTION SYSTEM OF BARUASAGAR ZONE-1,2 and 3 and CLEAR WATERGRAVITY MAIN FROM WTP TO ZONAL WATER WORKS AND RISING MAIN FORZONES-03 (Chui Khadan) BARUASAGAR NAGAR PALIKA PARISHAD 13 Excavation for pipe line trenches in soil mix / all type of rocks with moorum/shingles/kanker requiring use of special T&P ie. pick axe, sabbals etc. lift upto 1.50 m lead upto 50 m. stacking and spreading as directed, normal dewatering,preparing the bed,Filling watering ramming of excavated earth into pipe line trenches and disposal of surplus earth upto a distance of 10 KM from the centre of the pipe line trenches 14 0.00 To 1.5 m Depth 15 Same as above but excavation in all type of rock 16 0.00 To 1.5 m Depth 17 Supply of ISI mark DI K-9 and K-7 S&S pipes (push on joints) of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) andand Supply of specialsconforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. with jointing Materials including all taxes, freight, loading, unloading, insurance, duties etc., all complete. and supply of all DI DF/DI DS specialslike Tees, all type bend ( For Distribution, Feedermain And Rising main Purpose ) 18 80 mm Dia DI K-7 19 100 mm diaDI K-7 20 125 mm diaDI K-7 21 150 mm diaDI K-7 22 200 mm dia Distribution system and Junction (B-D) to Cwr at zone -3DI K-7 23 250 mm diaDI K-7 24 200 mm dia DI-K-9 25 Lowering, laying and jointing with SBR ruber gasketsD.I. K-7/ D.I. K-9 of various classes with DI / MS specials of following diameter in proper position, grade and alignment including conveyance of material to site of work. It also includes cost of jointing materials and rubber rings labour,hydraulic testing etc. complete.Carting of following sizes (Dia. in mm.) of pipes and specials including jointing mateirals from store to site of work lowering the same into excavated pipe line trenches true to alignment and gradient and jointing the same including testing of pipe line including supply of all materials labour T&P etc complete and as per direction of Engineer Incharge. 26 80 mm Dia 27 100 mm dia 28 125 mm dia 29 150 mm dia 30 200 mm dia Distribution system and Junction (B-D) to Cwr at zone -3 31 250 mm dia 32 200 mm dia DI-K9 Zone-3 33 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 PN 1.0 34 D.I.Sluice valve 35 100 mm dia 36 150 mm dia 37 200 mm dia 38 250 mm dia 39 Fire Hydrant as per IS Code 908 : 1975 40 65 mm Dia 41 Air valves as per IS 14845 : 2000 PN 1.0 42 50 mm Dia 43 20mm Dia 44 Scour valves 45 50 mm dia 46 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 PN 1.0 47 100 mm dia 48 150 mm dia 49 200 mm dia For Zone -3 50 250 mm dia 51 Fire Hydrant as per IS Code 908 : 1975 52 65 mm Dia 53 Air valves as per IS 14845 : 2000 PN 1.0 54 50 mm Dia 55 20 mm Dia 56 Scour valves 57 50 mm dia 58 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design. 59 Sluice valve chambers (Masonry type) 60 100 mm to 250 mm dia 61 Scour valve chambers (Masonry type) 62 Fire hydrantschambers 63 Air valve chambers 64 Dismantling (cutting by sharp eage machine tools) and Reinstatment of following type of road surfaces for laying of pipe line and house connection work including sorting out of serviceable materials and disposal of unserviceable materials. 65 Bituminious Road 66 Cement Concrete Road (CC) 67 Interlocking Tiles Road 68 Construction of thurst block in RCC 1:2:4 at bends & Tee in feeder main including supply of all labour, material, T&P etc. complete as per the details given below :- 69 Mild steel or iron work in R.C.C. wrought to required shape as necessary including bending for proper completion of the work including supply of steel and wastage etc. 70 Provision for crossing of Nalas (0.5mto 2.0 m innerwidth) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain. 71 0.5 - 1.0 m 72 1.0 - 1.5 m 73 1.5 - 2.0 m 74 Providing new water supply house connection to the consumersfrom new distribution pipe line of following diametersincluding making ferrule connection, cost of ferrule, 15 mm dia HDPE and GI pipe, saddle piece, ball valve, specials, excavation, refilling of pit etc. complete. It also includes supply of all materials, labour, T&P Including Dismentling and Reinstatment etc. required for proper completion of the work. As per attached drawing. 75 In all tupe of soil and rock 76 Bituminious Road 77 For 80 to 100 mm dia 78 For 125 to 150 mm dia 79 For 200 mm dia 80 Cement Concrete Road 81 For 80 to 100 mm dia 82 For 125 to 150 mm dia 83 For 200 mm dia 84 Interlocking Tiles Road 85 For 80 to 100 mm dia 86 For 125 to 150 mm dia 87 For 200 mm dia 88 Kachha Road 89 For 80 to 100 mm dia 90 For 125 to 150 mm dia 91 For 200 mm dia 92 Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 93 Brick masonry in cement mortar 1:4 94 12mm thick plaster in cement mortar 1:4 95 RCC M-20 (including MS work) 96 Stone masonry in cement mortar 1:6 97 Shifting of Existinghouse connection from existing pipe line to new pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 98 Repairing of house connection which is coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 99 Barricating of pipe line trenches by using bamboo poles,sheets, rope with red flags, Glow-caution boards, diversion boards & red lights Complete as per the direction of engineer incharge 100 Interconnection of existing pipe line to new pipe line including fitting special pipe, tee, bend, reducer pipe all complete as per site requirment T&P etc material complete as per the direction of engineer incharge 101 80 mm dia 102 100 mm dia 103 125 mm dia 104 150 mm dia 105 Disposal of surplus earth includingmoorum/stone bolder /building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 106 Boundary wallat zone -3 (chhui khadan) Rcc column based boundary wall as per design 30x50 m BOUNDARY WALL Construction of Boundry wall around campus as per unit estimate with RCC Columns @ 3.0m c/c distance with plinth beam and brick work including supply of all Materials, Labour, Tools and Plants etc. complete., as per departmental type drawing.Construction of2.0 meter high compound wall from formation level of campus,comprising of 230mmx230mm RCC Columns @ 3.0 m c/c distance with 230 mm thick beam at plinth and top, brick work of 230 mm thick in 1:4 and 12 MM THICK 1:4 cement plaster over all surface of wall , two coat of Exterior emulsion paint of approved reputed make over one coat of primer and even surface preparation by applying 2-3 layer of approved reputed make Puttyas perdesign approved by engineer in Charge, including supply of all material, labour, T& P etc complete. 107 3.60 m wide mild steel gate with rcc columns with 1.0 m wicket gate 108 earth filingincludingmoorum/stone bolder /building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 109 Provide all materials, labour and T&P to construct single roomed staff quarter as per type design and quantities of unit estimate all complete , including common stair case and other miscellaneous works. The plinth area of each staff quarter is 57.706 sqm.Detailed Survey, Design& Drawing, Construction of Residential Building based Office Building on R.C.C frame structure at different location finished with all respect, flooring made up with vitrified Tile/ Kota stone , Flush door shutter , glazed window cum ventilation including mosquito proof shutter, waterproofing at roof , anti-skid tile at toilet / bathroom / kitchen , water supply and sanitary work & electrification with all fixture, painting with 3 coat apex at exterior surface and emulsion at interiorsurface including2 coat Birla white puttyofbuilding, apron around building, appropriate size of septic tank and soak pit, including supply of all material, labour, T&P complete as per the direction of the engineer in charge 110 Plinth area of building 57.706 Sqm 111 Re-instatement of following type of road surfaces after laying of pipe line and house connection work including supply of all materials, T&P etc. requuired for proper completion of the work as per direction of engineer-in-charge. The quantity of re-instatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movemen 112 Bitumen roadTYPE AConstruction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-GSB G-1 (One coat) (90-40 mm) = 12.5 cmG -2 (one coat) (45-63 mm) = 7.5 cmG - 3 (one coat) (22.5 - 53 mm) = 7.5 cmBM (One coat)= 7.5 cmSDBC (One coat)= 2.5 cm 113 TYPE BConstruction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-Bitumen Road (SDBC + Tack coat)SDBC (One coat)= 2.5 cmTack coat with bituminous emulsion (MS)= 0.25 kg/sqm(30% consider for over dismantling of existing road) 114 Cement Concrete Road(100mm Thick PCC 1:4:8 and 100mm Thick CC 1:2:4) 115 C.C. Interlocking Tiles Road Type AConstruction of 80 mm tihck C.C. Interlocking Tile road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:4:8 (cement, coarse sand & stone ballast of 20-40 mm)Sand= 50 mm thick local sand lair for preparation of surfaceTiles = 30% new + 70% old 116 E and M Work 117 PUMPING PLANT AND ACCESSORIES FOR EXISTING INTAKE WELL ( ZONE-1) KHANDI (2.5 MLD) 118 Supply of Vertical type self-oil lubricated statically, dynamically, hydraulically balanced turbine pumpcapable of discharging at thefollowingdutyconditionasgivenbelowduetoallcauseswith surface discharge head confirming to IS:1710 and as amended as on date with accessories as per IS 5120/1977(Reconfirmed 2011) and as amendedthereaftertosuitthesitecondition.ThePumpBowlassembly and casing shall be CI IS 210 FG: 260 with suitable coating inside casing of 500 DFT, suitable for protection against corroision,erosion and prevent oxidation.Impeller and Wearing / Neckringshall be Duplex stainless steel CD4MCu (Chromium-24.5% minimum,Carbon < 0.04% ) as per ASTM A890 GrlA or DIN 1.4474-EN 10088, Hardness 220-260 BHN,pump shaft-Stainless steel AISI 410, pumps and line shaft sleeve - stainless steel with ceremic coating 700 BHN,Strainer-SS 304,coupling between pump ang motor - Flexible pin bush type and bearings shall be Anti friction L-10 with 60000 Hrs life at 1450 rpm.14mtr/suitablelengthcolumnassembly, with vertical Solid shaft Squirrel cage induction motor(IS:126152011/IEC60034-1)suitablefortheabovepump continuous rated TEFC IP-55 with Class F insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump. Capacity as follows :- 119 2050LPM, 25.00 HP, 37m Head 120 MAIN PIPING AND VALVES :-Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side, bye pass arrangement and 150mm common Header upto 1 m. outsidethe pump house along with 150 x 150 x 150 mm A/F Tee,150 mm bend, 150 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions. 121 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 122 Valve actuator of size 150mm for pumps and common header 123 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 124 150 mm Dia 125 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 126 Electromagnetic flow meter of size 150mm for common header 127 ELECTRICAL ITEMS:- 128 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 16sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 129 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION125A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION80 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 3 No, SpreaderLinks &Extended ROH for MCCB- 3 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 130 CE/UL Certified level transmitter for Intake well :- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 131 CE/UL Certified Pressure transmitter :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 132 CE/UL Certified Pressure transmitter for pumps 133 CE/UL Certified Pressure transmitter forCommon Header 134 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 135 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 136 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 137 Cable trench Chequerred plate 138 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 139 Internal & External electrification of pumping station. 140 PUMPING PLANT AND ACCESSORIES FOR EXISTING INTAKE WELL ( ZONE-2)FOR (3.20 MLD+3.50 MLD) 141 Supply of Vertical type self-oil lubricated statically, dynamically, hydraulically balanced turbine pumpcapable of discharging at thefollowingdutyconditionasgivenbelowduetoallcauseswith surface discharge head confirming to IS:1710 and as amended as on date with accessories as per IS 5120/1977(Reconfirmed 2011) and as amendedthereaftertosuitthesitecondition.ThePumpBowlassembly and casing shall be CI IS 210 FG: 260 with suitable coating inside casing of 500 DFT, suitable for protection against corroision,erosion and prevent oxidation.Impeller and Wearing / Neckringshall be Duplex stainless steel CD4MCu (Chromium-24.5% minimum,Carbon < 0.04% ) as per ASTM A890 GrlA or DIN 1.4474-EN 10088, Hardness 220-260 BHN,pump shaft-Stainless steel AISI 410, pumps and line shaft sleeve - stainless steel with ceremic coating 700 BHN,Strainer-SS 304,coupling between pump ang motor - Flexible pin bush type and bearings shall be Anti friction L-10 with 60000 Hrs life at 1450 rpm.14mtr/suitablelengthcolumnassembly, with vertical Solid shaft Squirrel cage induction motor(IS:126152011/IEC60034-1)suitablefortheabovepump continuous rated TEFC IP-55 with Class F insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump. Capacity as follows :- 142 2500LPM, 30.00 HP, 37m Head 143 MAIN PIPING AND VALVES :-Supply of 200mm Main piping & valves complete of suitable size and quantity required for delivery side, bye pass arrangement and 250mm common Header upto 1 m. outsidethe pump house along with 250 x 200 x 250 mm A/F Tee,250 mm bend, 250 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions. 144 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 145 Valve actuator of size 200mm for pumps 146 Valve actuator of size 250mm for common header 147 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 148 200 mm Dia for pumps 149 250 mm Dia for common header 150 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 151 Electromagnetic flow meter of size 250mm for common header 152 ELECTRICAL ITEMS:- 153 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 25 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 154 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION250A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION100 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 3 No, SpreaderLinks &Extended ROH for MCCB- 3 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 155 CE/UL Certified Pressure transmitter :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 156 CE/UL Certified Pressure transmitter forpumps 157 CE/UL Certified Pressure transmitter forCommon Header 158 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 159 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 160 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 161 RENNOVATION OF EXISTING 160 KVA SUB STATION AT INTAKEWELL 162 Supplying of indoor type floor mounted metal clad, 11 KV VCB panel with 1No. VCBs, totally enclosed & fully interlocked, horizontal drawout, horizontal/ vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, manually charged and auto/manually closing breaker suitable for use on 11 KV, 3 Phase, 50 Hz A.C. supply with short circuit fault level of 100 KVa, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 1600Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories i/c connections suitable for 11 KV cable (cable entry from *bottom/ top/side) end termination with heat shrinkable jointing material etc. as required. (Note- Cost of end termination not included in this item)(a) Incoming – ½* No 800Amp. VCB(b) 1* No. – 11 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burder with 1 No. Voltmeter (0-15KV), analog/digital* type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on incomer.(c) 1* No. – (0-100 A) dual scale Ammeter, analog/digital* type, selector switches for ammeters.(d) 1* No. – Microprocessor based numerical relay with O/L, E/F and S/C protection.(e)1* No. – Set of dual core dual ratio 3 CTs 300/150/5/5 A of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection.(a) Outgoing – 2Nos. 800Amp. VCB(b) 2Nos. – (0-100 A) Ammeters, dual scale analog/digital* type & selector switches for Ammeters.(c) 2 Nos. – Microprocessor based numerical relays with O/L, E/F & S/C protections.(d) 2 Nos. – Setofdualcoredualratio3CTs 100/ 50/5/5 A of 15 VA burden and accuracy Class-1.0 for metering and class 5P10 for protection.1. Supply of power pack 24 volts complete with battery and charging device. 163 Supply of 50 Sq.mm size XLPE cable from 11 K.V.UPPCL metering panel to 11 KV incoming H.T. switch gear panel and panel to transformer. 164 Supplying of 160KVA, 11/0.415 KV, 3 Phase, 50 Hz, Dyn 11, indoor ONAN type, copper wound transformer with OFF load tap changing arrangement on HV side in steps of +/- 2.5% & -7.5%, having cable end boxes on HV side suitable for 3x150sqmm XLPE cable of 33 KV grade and bus trunking arrangement on LV side complete with all accessories i/c first filling of filtered dehydrated oil and confirming to IS 1180 & as per specification attached complete in all respects as required at site. 165 Supplying of cubicall type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for framework and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630Amp capacity extensible type TPN aluminium alloy bus bars of hight conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth barof size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from mainbus bar to switch gears with required size of Al. bus bars and control wiring with 50sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :-(I) Incoming : 2 Nos.. 630 Amps horizontal drawout type air circui+B12t breaker of fault breaking capacity 50 KA (Ics=Icu upto433 V manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON/ OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993 as amended up-to-date complete with following accessories for each ACB.(a) Independent manual spring closing mechanism- 1 No.B10(b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection- 1 set.(c) Analog 96 mm square flush pattern /Digital* type Voltmeter (0-500 V), with selector switch & back up HRC fuses/ MCBs-1 set.(d) Analog 96 mm. square flush pattern/ Digital* type Ammeter (0-630Amp), with selector switch and one set of 3 nos. CT’s of ratio10/5A Class I accuracy and 15 VA burden- 1set. (e) 3 Nos. Phase indication LED lamps with2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.(f) Shunt trip coil 220 V A.C.(II) Bus Couplers :1Nos. 630Amps drawout type, air circuit breakers offault breaking capacity 50 KA (Ics=Icu upto433 V) manually operated, with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact conforming to IS 13947- 2 : 1993 as amended upto date complete with following accessories for each ACB:(a) Independent manual spring closing mechanism- 1 No.(b) Breaker ‘ON’ indicating light with back up 2 A HRC fuse test terminal block, fuses, circuits contactors for positive electrical interlocking of breakers, etc. as required- 1 set.(III) Bus Bars :TPN aluminium bus bars of minimum of 630Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec. 166 (IV) Interlocking :Electrical through advance contacts in ACB’s (incomers & bus couplers) and mech- anical (castel key) interlocking should beprovided to ensure that only one supply is available at a time on each section of bus and to eliminate any possiblility of accidentally approaching two supplies at one bus section.(V) Outgoing :(a) 1Nos. 630Amp 4 Pole ACB (Ics = kA upto 433 V)/SFU with HRC fuse (BC : 80 kA)(b) CT’s of ratio 10/5Amps 4Nos.4Set (1 set of 2 Nos.)(c) Analog 96 mmsq/Digital* type ammeter (0-100Amp) with selector switch set. 167 Supply and laying of 650/1100 volt grade 185 sq mm 3½ core PVC Armoured Aluminium cable from transformer to L.Tpanel and from outgoing panel to distribution panel (1x3½x185 sq mm) 168 Making Earth pit for earthing complete in all respect. Earthing system shall executed as per IS:3043 and I.E. rules. 169 Installation and commissioning of 11 KV/0.4 KV substations including HT Panels and L.T. main control panel including all labor T&P complete in all respect. 170 Supply and making of indoor cable end termination joint kit of size 70 sq mm 3 core for 11 KV H.T. XLPE cable 171 Supply and making of outdoor cable end termination joint kit of size 240 sq mm 3 core for 11 KV H.T. XLPE cable 172 Provision for routine testing of equipments such as transformer, HT Panels and main LT Panel at manufacturer’s works. 173 NOC from Electrical safety department for all field installations such as pumping plants, substation etc.( 11KV Power connection is already available at site. 174 PUMPING PLANT AND ACCESSORIES FROM CWR TO OHT AT WTP ( EXISTING 125KL/20 M ) 175 Supply ofEnergy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motor (IE2) ( Enclosure conforming to protection IP55) Horizontal Foot Mounted Induction Motor, continuously rated suitable for operation on 415+/-10% ,50Hz+/-5% , A.C. supply with class F insulation for 50 Deg. C ambient temperature and altitude less than 1000 M above MSL and conforming to IEC:60034-1 & IS 12615:2018. with pump with following specifications. 176 1845 LPM, 25.00 HP, 32m Head 177 MAIN PIPING AND VALVES :-Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side and 150mm common Header upto 1 m. outsidethe pump house along with 150 x 150 x 150 mm A/F Tee,150 mm duckfoot bend, Enlargers, 150 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions suitable for above pumping plants. 178 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 179 Valve actuator of size 150mm for pumps 180 Valve actuator of size 150mm for common header 181 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 182 150 mm Dia for pumps 183 150 mm Dia for common header 184 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 185 Electromagnetic flow meter of size 150mm for common header 186 Electromagnetic flow meter of size 250mm at CWR Inlet 187 ELECTRICAL ITEMS:- 188 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 16 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 189 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION125A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION80 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 3 No, SpreaderLinks &Extended ROH for MCCB- 3 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 190 CE/UL Certified level transmitter for CWR :- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 191 CE/UL Certified Pressure transmitter:- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 192 CE/UL Certified Pressure transmitter for pumps 193 CE/UL Certified Pressure transmitter forCommon Header. 194 Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.(Competible to SCADA) 195 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 196 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 197 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 198 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 199 Internal & External electrification of CWR 200 PUMPING PLANT AND ACCESSORIES FROM CWR TO CWR HILLOCK ( EXISTING 850 KL) 201 Supply ofEnergy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motor (IE2) ( Enclosure conforming to protection IP55) Horizontal Foot Mounted Induction Motor, continuously rated suitable for operation on 415+/-10% ,50Hz+/-5% , A.C. supply with class F insulation for 50 Deg. C ambient temperature and altitude less than 1000 M above MSL and conforming to IEC:60034-1 & IS 12615:2018. with pump with following specifications. 202 1845 LPM, 20.00 HP, 22m Head 203 MAIN PIPING AND VALVES :-Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side and 300mm common Header upto 1 m. outsidethe pump house along with 150 x 150 x 150 mm A/F Tee,150 mm duckfoot bend, Enlargers, 150 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions suitable for above pumping plants. 204 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 205 Valve actuator of size 150mm for pumps 206 Valve actuator of size 150mm for common header 207 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 208 150 mm Dia for pumps 209 150 mm Dia for common header 210 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 211 Electromagnetic flow meter of size 150mm for common header 212 Electromagnetic flow meter of size 250mm at CWR Inlet 213 ELECTRICAL ITEMS:- 214 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 16 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 215 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION100A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No. OUTGOING SECTION63 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 6 No, SpreaderLinks &Extended ROH for MCCB- 6 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 216 CE/UL Certified level transmitter for CWR :- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 217 CE/UL Certified Pressure transmitter:- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 218 CE/UL Certified Pressure transmitter for pumps 219 CE/UL Certified Pressure transmitter forCommon Header. 220 Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.(Competible to SCADA) 221 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043 Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 222 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 223 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 224 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 225 Internal & External electrification of CWR 226 PUMPING PLANT AND ACCESSORIES FROM CWR WTP TO OHT 350 KL / 22 M 227 Supply ofEnergy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motor (IE2) ( Enclosure conforming to protection IP55) Horizontal Foot Mounted Induction Motor, continuously rated suitable for operation on 415+/-10% ,50Hz+/-5% , A.C. supply with class F insulation for 50 Deg. C ambient temperature and altitude less than 1000 M above MSL and conforming to IEC:60034-1 & IS 12615:2018. with pump with following specifications. 228 1680LPM, 30.00 HP, 44m Head 229 MAIN PIPING AND VALVES :-Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side, bye pass arrangement and 100mm common Header upto 1 m. outsidethe pump house along with 150 x 200 x 150 mm A/F Tee,200 mm duckfoot bend, 200 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions. 230 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 231 Valve actuator of size 150mm for pumps 232 Valve actuator of size 200mm for common header 233 Valve actuator of size 300mm at OHT Outlet 234 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 235 150 mm Dia for pumps 236 200 mm Dia for common header 237 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 238 Electromagnetic flow meter of size 200mm for common header 239 Electromagnetic flow meter of size 300mm at CWR Inlet 240 Electromagnetic flow meter of size 300mm at OHT Outlet 241 ELECTRICAL ITEMS:- 242 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 25 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 243 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION250A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No. OUTGOING SECTION100 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 6 No, SpreaderLinks &Extended ROH for MCCB- 6 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 244 CE/UL Certified level transmitter:- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 245 CE/UL Certified level transmitter for CWR 246 CE/UL Certified level transmitter for OHT 247 CE/UL Certified Pressure transmitter :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 248 CE/UL Certified Pressure transmitter for pumps 249 CE/UL Certified Pressure transmitter forCommon Header, OHT outlet etc. 250 Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.(Competible to SCADA) 251 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043 Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 252 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 253 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 254 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 255 Internal & External electrification of Pump house 256 PUMPING PLANT AND ACCESSORIES FROM CWR WTP TO EXISTING OHT 1100 KL / 17 M 257 Supply ofEnergy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motor (IE2) ( Enclosure conforming to protection IP55) Horizontal Foot Mounted Induction Motor, continuously rated suitable for operation on 415+/-10% ,50Hz+/-5% , A.C. supply with class F insulation for 50 Deg. C ambient temperature and altitude less than 1000 M above MSL and conforming to IEC:60034-1 & IS 12615:2018. with pump with following specifications. 258 1680LPM, 25.00 HP, 34m Head 259 MAIN PIPING AND VALVES :-Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side, bye pass arrangement and 100mm common Header upto 1 m. outsidethe pump house along with 150 x 200 x 150 mm A/F Tee,200 mm duckfoot bend, 200 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions. 260 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 261 Valve actuator of size 150mm for pumps 262 Valve actuator of size 200mm for common header 263 Valve actuator of size 400mm at OHT Outlet 264 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 265 150 mm Dia for pumps 266 200 mm Dia for common header 267 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 268 Electromagnetic flow meter of size 200mm for common header 269 Electromagnetic flow meter of size 300mm at CWR Inlet 270 Electromagnetic flow meter of size 400mm at OHT Outlet 271 ELECTRICAL ITEMS:- 272 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 16 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 273 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION200A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No. OUTGOING SECTION80 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 6 No, SpreaderLinks &Extended ROH for MCCB- 6 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 274 CE/UL Certified level transmitter:- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 275 CE/UL Certified level transmitter for CWR 276 CE/UL Certified level transmitter for OHT 277 CE/UL Certified Pressure transmitter:- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 278 CE/UL Certified Pressure transmitter for pumps 279 CE/UL Certified Pressure transmitter forCommon Header, OHT outlet etc. 280 Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.(Competible to SCADA) 281 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043 Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 282 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 283 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 284 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 285 Internal & External electrification of Pump house 286 PUMPING PLANT AND ACCESSORIES FROM CWR TO OHT AT CHUIKHADAN ( 450KL / 22M ) 287 Supply of Vertical type self-waterlubricated statically, dynamically, hydraulically balanced turbine pumpcapable of discharging at thefollowingdutyconditionasgivenbelowduetoallcauseswith surface discharge head confirming to IS:1710 and as amended as on date with accessories as per IS 5120/1977(Reconfirmed 2011) and as amendedthereaftertosuitthesitecondition.ThePumpBowlassembly and casing shall be CI IS 210 FG: 260 with suitable coating inside casing of 500 DFT, suitable for protection against corroision,erosion and prevent oxidation.Impeller and Wearing / Neckringshall be Duplex stainless steel CD4MCu (Chromium-24.5% minimum,Carbon < 0.04% ) as per ASTM A890 GrlA or DIN 1.4474-EN 10088, Hardness 220-260 BHN,pump shaft-Stainless steel AISI 410, pumps and line shaft sleeve - stainless steel with ceremic coating 700 BHN,Strainer-SS 304,coupling between pump ang motor - Flexible pin bush type and bearings shall be Anti friction L-10 with 60000 Hrs life at 1450 rpm.06mtr/suitablelengthcolumnassembly, with vertical Solid shaft Squirrel cage induction motor(IS:126152011/IEC60034-1)suitablefortheabovepump continuous rated TEFC IP-55 with Class F insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump. Capacity as follows :- 288 1860LPM, 30 HP, 40m Head 289 MAIN PIPING AND VALVES :-Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side and 150mm common Header upto 1 m. outsidethe pump house along with 150 x 150 x 150 mm A/F Tee,150 mm duckfoot bend, Enlargers, 200 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions suitable for above pumping plants. 290 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 291 Valve actuator of size 150mm for pumps 292 Valve actuator of size 150mm for common header 293 Valve actuator of size 300mm at OHT outlet 294 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 295 150 mm Dia for pumps 296 150 mm Dia for common header 297 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 298 Electromagnetic flow meter of size 150mm for common header 299 Electromagnetic flow meter of size 300mm at CWR Inlet 300 Electromagnetic flow meter of size 300mm at OHT outlet 301 ELECTRICAL ITEMS:- 302 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 25 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 303 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION125A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No. OUTGOING SECTION100 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 6 No, SpreaderLinks &Extended ROH for MCCB- 6 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 304 CE/UL Certified level transmitter for CWR :- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 305 CE/UL Certified level transmitter for CWR 306 CE/UL Certified level transmitter for OHT 307 CE/UL Certified Pressure transmitter:- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 308 CE/UL Certified Pressure transmitter for pumps 309 CE/UL Certified Pressure transmitter forCommon Header. 310 CE/UL Certified Pressure transmitter for OHT outlet 311 Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.(Competible to SCADA) 312 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043 Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 313 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 314 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 315 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 316 Internal & External electrification of CWR 317 PUMPING PLANT AND ACCESSORIES FROM CWR TO OHT AT KANSHIRAM COLONY (EXISTING) 318 Supply of Vertical type self-waterlubricated statically, dynamically, hydraulically balanced turbine pumpcapable of discharging at thefollowingdutyconditionasgivenbelowduetoallcauseswith surface discharge head confirming to IS:1710 and as amended as on date with accessories as per IS 5120/1977(Reconfirmed 2011) and as amendedthereaftertosuitthesitecondition.ThePumpBowlassembly and casing shall be CI IS 210 FG: 260 with suitable coating inside casing of 500 DFT, suitable for protection against corroision,erosion and prevent oxidation.Impeller and Wearing / Neckringshall be Duplex stainless steel CD4MCu (Chromium-24.5% minimum,Carbon < 0.04% ) as per ASTM A890 GrlA or DIN 1.4474-EN 10088, Hardness 220-260 BHN,pump shaft-Stainless steel AISI 410, pumps and line shaft sleeve - stainless steel with ceremic coating 700 BHN,Strainer-SS 304,coupling between pump ang motor - Flexible pin bush type and bearings shall be Anti friction L-10 with 60000 Hrs life at 1450 rpm.06mtr/suitablelengthcolumnassembly, with vertical Solid shaft Squirrel cage induction motor(IS:126152011/IEC60034-1)suitablefortheabovepump continuous rated TEFC IP-55 with Class F insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump. Capacity as follows :- 319 700LPM, 12.5 HP, 35m Head 320 MAIN PIPING AND VALVES :-Supply of 100mm Main piping & valves complete of suitable size and quantity required for delivery side and 100mm common Header upto 1 m. outsidethe pump house along with 100 x 100 x 100 mm A/F Tee,100 mm bend, Enlargers, 100 mm blind flange, D/F Pipes suitable sizeall necessary nuts, bolts, rubber packing, M.S Support for pipe,mechanical joints and valve etc. complete in all respect as per site conditions suitable for above pumping plants. 321 Motor operated actuator with sluice valve :- Supply of DI/DF sluice valve withElectrically integrated actuater (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 322 Valve actuator of size 100mm for pumps 323 Valve actuator of size 100mm for common header 324 Valve actuator of size 250mm at OHT outlet 325 Non return valve :- Supply of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(partI & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 326 100 mm Dia for pumps 327 100 mm Dia for common header 328 CE/UL Certified Electromagnetic flow meter :- SupplyofCE/ULFullBorecElectromagneticFlowMeterofapproved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable. 329 Electromagnetic flow meter of size 100mm for common header 330 Electromagnetic flow meter of size 250mm at CWR Inlet 331 Electromagnetic flow meter of size 250mm at OHT outlet 332 ELECTRICAL ITEMS:- 333 Supply& laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 10 sq.mmfrom control Panel to respective Motors with lugs etc. (copperconductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I / IS :7098 P I) 334 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitableto SCADA operation with RS485 Port consisting ofINCOMMING SECTION100A,50KA,TPN,ACB microprocessorbaseed (O/C,S/C)release-1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A- 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No. OUTGOING SECTION40 A, 50KA, TPN, MCCBmicroprocessorbased (O/C,S/C) RELEASE - 6 No, SpreaderLinks &Extended ROH for MCCB- 6 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 335 CE/UL Certified level transmitter:- SupplyofCE/ULcirtifiedof RadarleveltransmitterCEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 336 CE/UL Certified level transmitter for CWR 337 CE/UL Certified level transmitter for OHT 338 CE/UL Certified Pressure transmitter:- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 339 CE/UL Certified Pressure transmitter for pumps 340 CE/UL Certified Pressure transmitter forCommon Header. 341 CE/UL Certified Pressure transmitter for OHT outlet 342 Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.(Competible to SCADA) 343 Earthingwithcopperearthplate600mmX600mmX3mmthick including accessories, and providing masonry enclosure with cover plate havinglockingarrangementandwateringpipeof2.7metrelongetc. with charcoal/ coke and salt as required according to latest IS:3043 Supplyingandlaying50mmX6mmG.I. stripat0.50metrebelow groundas stripearth electrode, including connection/ terminatingwith nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 344 Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants 345 RubbermatsforelectricalpurposeasperIS:5424-1969, plain/chequered (1mX2m) - 10mm thickness 346 Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board. 347 Internal & External electrification of CWR 348 INTERNAL AND EXTERNAL ELECTRIFICATION FOR WTP 349 Internal and External Electrification 350 Outdoor Lighting 351 Supply installation tesling & Commissioning of IS0 certiftedcompany made high mast lighting system (as per PLG 07 of ILP UK technical report no 7 of ILE UK /IS:875 Part-1 - 2015//BSEN10025/and IS:2062 )consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, S.S. ropes (AISI 316, 7 / 19 costruction), EPR insulated PCP sheathed trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required as per IS 456/IS 2911. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal (Octogonal) section, telescopic jointed and welding as per BS 5135 and also provide test certificate for wind tunnel test for High mast fixtures. complete in all respect. 352 12.5 Mtr. HM (in 2 Section) 353 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy >=120 Im/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety . Input Frequency 50Hz‡3%, Power Factor >0.95 ,driver Efficiency >85% .THD(I) <10% , driver current <1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min >=4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index >70 and CCT 5700K + 1355K, Driver current <1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screenprinting on die cast housing to allow traceability/authenticity. Fixture-shall be IS 10322 Complianced and also provide test Certificate/ report with liable warranty of product/accessories. 354 High Power LED Flood Light 200W 355 Indoor Lighting 356 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with2.5 KV internal/external surge protection B|S certified isolated driver having efficiency > 85% , with Short & Open circuit protection and in compliance to IC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt ,THD < 10 % , p.f.>0.95,CRI >80 . life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000°K / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing and also provide test certificate of LED Fixtures from NABL. 357 36 W LED light Fixture 2 x 2 with acrylic / prismatic front cover. 358 Complete wiring of Pump house, HT & LT room with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 359 Automation For Intake Well 360 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 361 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 362 CE/UL Certified Intelligent energy meters 363 CE/UL Certified Surge protector for control panel 364 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 365 Cable 366 (i) Complete cabling above 3 Pumps 367 Security Survelliance IP Camera with recorder (optional) 368 Installation, commissioning & testing 369 AUTOMATION FOR CWR-1A 370 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 371 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 372 CE/UL Certified Intelligent energy meters 373 CE/UL Certified Surge protector for control panel 374 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 375 Turbidity Analyzer at CWR 376 PH Analyzer 377 Chlorine Analyzer 378 Cable 379 (i) Complete cabling upto 3 Pumps 380 Security Survelliance IP Camera with recorder (optional) 381 Installation, commissioning & testing 382 AUTOMATION FOR CWR-1B 383 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 384 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 385 CE/UL Certified Intelligent energy meters 386 CE/UL Certified Surge protector for control panel 387 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 388 Turbidity Analyzer at CWR 389 PH Analyzer 390 Chlorine Analyzer 391 Cable 392 (i) Complete cabling upto 3 Pumps 393 Security Survelliance IP Camera with recorder (optional) 394 Installation, commissioning & testing 395 AUTOMATION FOR CWR-2A 396 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 397 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 398 CE/UL Certified Intelligent energy meters 399 CE/UL Certified Surge protector for control panel 400 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 401 Turbidity Analyzer at CWR 402 PH Analyzer 403 Chlorine Analyzer 404 Cable 405 (i) Complete cabling upto 3 Pumps 406 Security Survelliance IP Camera with recorder (optional) 407 Installation, commissioning & testing 408 AUTOMATION FOR CWR-2B 409 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 410 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 411 CE/UL Certified Intelligent energy meters 412 CE/UL Certified Surge protector for control panel 413 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 414 Turbidity Analyzer at CWR 415 PH Analyzer 416 Chlorine Analyzer 417 Cable 418 (i) Complete cabling upto 3 Pumps 419 Security Survelliance IP Camera with recorder (optional) 420 Installation, commissioning & testing 421 AUTOMATION FOR CWR-2C 422 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 423 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 424 CE/UL Certified Intelligent energy meters 425 CE/UL Certified Surge protector for control panel 426 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 427 Turbidity Analyzer at CWR 428 PH Analyzer 429 Chlorine Analyzer 430 Cable 431 (i) Complete cabling upto 3 Pumps 432 Security Survelliance IP Camera with recorder (optional) 433 Installation, commissioning & testing 434 AUTOMATION FOR CWR-2D 435 CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 436 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 437 CE/UL Certified Intelligent energy meters 438 CE/UL Certified Surge protector for control panel 439 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 440 Turbidity Analyzer at CWR 441 PH Analyzer 442 Chlorine Analyzer 443 Cable 444 (i) Complete cabling upto 3 Pumps 445 Security Survelliance IP Camera with recorder (optional) 446 Installation, commissioning & testing 447 Local Control Station at WTP 448 CE/UL & BIS Certified industrial grade LED Monitor with latest configuration as per specification 449 Desktop / PC with i5/i7 processor for as per technical bid documents 450 CE/UL Certified 3 KVA UPS with batteries as per technical bid documents 451 Full development version of required TAGS SCADA Software with customization of software for LCS as per requirement as per spec. mentioned in technical bid documents. 452 CE/UL certified local control room PLC with redundant CPU & power supply at LCS in IP 54 enclouseras per spec. mentioned in technical bid documents. 453 GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & received data & gather from remote sites to control station, all accessories included signal enhancer anternna along with running expenses till DLP 454 CE/UL Certified firewall for network protection 455 SURGE PROTECTOR FOR ETHERNET communication protection. 456 CE/UL certified industrial grade Ethernet Swtich 457 Cannon/HP or equivalent Laser printer 1018 or equivalent 458 Security Survillance IP Camera with recorder (Optional) 459 Installation, Commissioning & testing including required furniture, A/C etc. 460 Trial & Run 461 03 Months trial & run
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
21.
Public Administrative Department #9441744 Technical Bid
tender for Servicing & Overhauling work of Diesel pump, Vacuum Pump & V.T. Pump Installed in Chachar Nala Permanent Flood Pumping Station & Cleaning work of sump well & Drain.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
22.
Educational and Research Institute #9437302 AOC
Tender For Civil maintenance Work Rate Contract- 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.(D.S.R.2023,Vol.1,Code-2.8)2.8.1 2 Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 2.9.1 Ordinary rock. (D.S.R.2023,Vol.1,Code-2.9)2.9.1 3 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. Complete. (D.S.R.2023,Vol.1,Code-2.25 A) 4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (D.S.R.2023,Vol.1,Code-2.31) 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources (D.S.R.2023,Vol.1,Code-4.1)4.1.8 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.2023,Vol.1,Code-4.1)4.1.3 7 Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) (D.S.R.2023,Vol.1,Code-4.5)4.5.1 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (D.S.R.2023,Vol.1,Code-5.1)5.1.2 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(D.S.R.2023,Vol.1,Code-5.3) 10 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.5.18.3 25 mm thick (D.S.R.2023,Vol.1,Code-5.18)5.18.3 11 Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). (D.S.R.2023,Vol.1,Code-5.23) 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (D.S.R.2023,Vol.1,Code-6.1)6.1.1 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (D.S.R.2023,Vol.1,Code-6.4)6.4.1 14 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) (D.S.R.2023,Vol.1,Code-6.13)6.13.2 15 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)(D.S.R.2023,Vol.1,Code-7.1)7.1.1 16 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) (D.S.R.2023,Vol.1,Code-7.2)7.2.1 17 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red8.2.2.2 Area of slab over 0.50 sqm(D.S.R.2023,Vol.1,Code-8.2)8.2.2/8.2.2.2 18 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.8.10.2 Granite Stone of approved shade (D.S.R.2023,Vol.1,Code-8.10)8.10.2 19 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete :8.30.1 18 mm thick (D.S.R.2023,Vol.1,Code-8.30)8.30.1 20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (D.S.R.2023,Vol.1,Code-9.21)9.21.1 21 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding (D.S.R.2023,Vol.1,Code-9.48)9.48.1 22 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. 9.51.1 With 2nd class teak wood beading 62X19 mm sqm (D.S.R.2023,Vol.1,Code-9.51)9.51.1 23 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.95.1 125x75x4 mm (D.S.R.2023,Vol.1,Code-9.95)9.95.1 24 Providing and fixing bright finished brass door latch with necessary screws etc. complete : 9.75.1 300x16x5 mm (D.S.R.2023,Vol.1,Code-9.75)9.75.1 25 Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125 mm (D.S.R.2023,Vol.1,Code-9.81)9.81.1 26 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(D.S.R.2023,Vol.1,Code-9.83) 27 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC C channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturers specification & drawing.9.120.2 30 mm thick pre laminated PVC door shutters. (D.S.R.2023,Vol.1,Code-9.120) 9.120.2 28 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) (D.S.R.2023,Vol.1,Code-9.168) 29 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.10.5.1 Using M.S. angels 40x40x6 mm for diagonal brac(D.S.R.2023,Vol.1,Code-10.5) 10.5.1 30 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover(D.S.R.2023,Vol.1,Code-10.6) 10.6.1 31 Providing and fixing ball bearing for rolling shutters. (D.S.R.2023,Vol.1,Code-10.7) 32 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (D.S.R.2023,Vol.1,Code-10.15) 10.15.1 33 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (D.S.R.2023,Vol.1,Code-10.31) 34 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.1 M.S. tube (D.S.R.2023,Vol.1,Code-10.26)10.26.1 35 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (D.S.R.2023,Vol.1,Code-10.28) 36 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. 10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both side (D.S.R.2023,Vol.1,Code-10.29)10.29.1 37 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 10.30.1 4.0 mm thick glass panes (D.S.R.2023,Vol.1,Code-10.30)10.30.1 38 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 10.30.2 5.5 mm thick glass panes(D.S.R.2023,Vol.1,Code-10.30)10.30.2 39 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate(D.S.R.2023,Vol.1,Code-11.3)11.3.1 40 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.(D.S.R.2023,Vol.1,Code-11.4) 41 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 11.13.1 40 mm wide and 4 mm thick (D.S.R.2023,Vol.1,Code-11.13)11.13.1 42 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. 11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.1.1 Acid and alkali resistant tilek(D.S.R.2023,Vol.1,Code-11.21)11.21.1/11.21.1.1 43 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.11.21.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.2.1 Acid and alkali resistant tile(D.S.R.2023,Vol.1,Code-11.21)11.21.2/11.21.2.1 44 Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.22.1 Marble tiles (polished) Raj Nagar 11.22.1.1 8 mm thick (D.S.R.2023,Vol.1,Code-11.22)11.22.1/11.22.1.1 45 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :11.23.1 Makrana white second quality(D.S.R.2023,Vol.1,Code-11.23)11.23.1 46 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick(D.S.R.2023,Vol.1,Code-11.26)11.26.1 47 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(D.S.R.2023,Vol.1,Code-11.27) 48 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.(D.S.R.2023,Vol.1,Code-11.34) 49 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.11.41.2 Size of Tile 600x600 mm(D.S.R.2023,Vol.1,Code-11.41)11.41.2 50 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.11.46.2 Size of Tile 600x600 mm (D.S.R.2023,Vol.1,Code-11.46)11.46.2 51 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.0 mm thick with zinc coating not less than 275 gm/m²(D.S.R.2023,Vol.1,Code-12.1)12.1.1 52 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 12.15.1 With residual type petroleum bitumen of grade VG -10(D.S.R.2023,Vol.1,Code-12.15)12.15.1 53 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): 12.31.1 Flat surfaces (D.S.R.2023,Vol.1,Code-12.31)12.31.1 54 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board(D.S.R.2023,Vol.1,Code-12.45)12.45.3 55 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.(D.S.R.2023,Vol.1,Code-12.52)12.52.3 56 15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 1:4 (1 cement: 4 fine sand) (D.S.R.2023,Vol.2,Code-13.2)13.2.1 57 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement: 4 fine sand) (D.S.R.2023,Vol.2,Code-13.3)13.3.1 58 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 13.8.1 1:3 (1 cement: 3 fine sand)(D.S.R.2023,Vol.2,Code-13.8)13.8.1 59 White washing with lime to give an even shade : 13.37.1 New work (three or more coats) (D.S.R.2023,Vol.2,Code-13.37)13.37.1 60 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer (D.S.R.2023,Vol.2,Code-13.41)13.41.1 61 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)(D.S.R.2023,Vol.2,Code-13.44)13.44.1 62 Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (D.S.R.2023,Vol.2,Code-13.45)13.45.1 63 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (D.S.R.2023,Vol.2,Code-13.46)13.46.1 64 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(D.S.R.2023,Vol.2,Code-13.47)13.47.1 65 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (D.S.R.2023,Vol.2,Code-13.48)13.48.1 66 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specification : 13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (D.S.R.2023,Vol.2,Code-13.48)13.48.2 67 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture (D.S.R.2023,Vol.2,Code-13.48)13.48.3 68 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (D.S.R.2023,Vol.2,Code-13.48A)13.48A.1 69 Applying priming coat:13.50.2 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood (D.S.R.2023,Vol.2,Code-13.50)13.50.2 70 Applying priming coat:13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works (D.S.R.2023,Vol.2,Code-13.50)13.50.3 71 Applying priming coat:13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) (D.S.R.2023,Vol.2,Code-13.50)13.50.4 72 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : 13.51.1 One coat (D.S.R.2023,Vol.2,Code-13.51)13.51.1 73 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : 13.51.2 Two coat (D.S.R.2023,Vol.2,Code-13.51)13.51.2 74 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work: 13.55.1 100 mm diameter pipes (D.S.R.2023,Vol.2,Code-13.55)13.55.1 75 Painting with oil type wood preservative of approved brand and manufacture : 13.57.1 New work (two or more coats) (D.S.R.2023,Vol.2,Code-13.57)13.57.1 76 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactur (D.S.R.2023,Vol.2,Code-13.62)13.62.1 77 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : 13.69.1 New work (D.S.R.2023,Vol.2,Code-13.69)13.69.1 78 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (D.S.R.2023,Vol.2,Code-13.80) 79 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.81.1 Old work(one or more coat)(D.S.R.2023,Vol.2,Code-13.81)13.81.1 80 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.82.1 One coat (D.S.R.2023,Vol.2,Code-13.82)13.82.1 81 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.82.2 Two coat (D.S.R.2023,Vol.2,Code-13.82)13.82.2 82 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.1 One coat (D.S.R.2023,Vol.2,Code-13.83)13.83.1 83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coat (D.S.R.2023,Vol.2,Code-13.83)13.83.2 84 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre (D.S.R.2023,Vol.2,Code-13.85)13.85.1 85 White washing with lime to give an even shade : 13.87.1 Old work (two or more coats) (D.S.R.2023,Vol.2,Code-13.87)13.87.1 86 White washing with lime to give an even shade : 13.87.2 Old work (one or more coats) (D.S.R.2023,Vol.2,Code-13.87)13.87.2 87 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Comple (D.S.R.2023,Vol.2,Code-13.88) 88 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : 13.90.1 Old work (one or more coats) (D.S.R.2023,Vol.2,Code-13.90)13.90.1 89 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (D.S.R.2023,Vol.2,Code-13.91) 90 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.92.1 Old work (one or more coats) (D.S.R.2023,Vol.2,Code-13.92)13.92.1 91 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work(D.S.R.2023,Vol.2,Code-13.99)13.99.1 92 Painting with aluminium paint of approved brand and manufacture to give an even shade: 13.100.1 One or more coats on old work(D.S.R.2023,Vol.2,Code-13.100)13.100.1 93 Polishing on wood work with ready made wax polish of approved brand and manufacture : 13.104.1 Old work (D.S.R.2023,Vol.2,Code-13.104)13.104.1 94 Finishing walls with textured exterior paint of required shade : 13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. (D.S.R.2023,Vol.2,Code-13.110)13.110.1 95 Finishing walls with textured exterior paint of required shade : 13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm.(D.S.R.2023,Vol.2,Code-13.110)13.110.2 96 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (D.S.R.2023,Vol.2,Code-13.111)13.111.1 97 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm)(D.S.R.2023,Vol.2,Code-13.111)13.111.2 98 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (D.S.R.2023,Vol.2,Code-13.112)13.112.1 99 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.112.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm) (D.S.R.2023,Vol.2,Code-13.112)13.112.2 100 Melamine polishing on wood work (one or more coat). (D.S.R.2023,Vol.2,Code-13.114) 101 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. (D.S.R.2023,Vol.2,Code-13.115) 102 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)(D.S.R.2023,Vol.2,Code-14.1)14.1.1 103 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.1 Door chowkhats (D.S.R.2023,Vol.2,Code-14.2)14.2.1 104 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.2 Window chowkhats (D.S.R.2023,Vol.2,Code-14.2)14.2.2 105 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.3 Clerestory window chowkhats (D.S.R.2023,Vol.2,Code-14.2)14.2.3 106 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. 14.4.1 For door/ window/ clerestory window (D.S.R.2023,Vol.2,Code-14.4)14.4.1 107 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (D.S.R.2023,Vol.2,Code-14.5)14.5.1 108 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (D.S.R.2023,Vol.2,Code-14.5)14.5.2 109 Renewing glass panes, with wooden fillets wherever necessary: 14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (D.S.R.2023,Vol.2,Code-14.6)14.6.1 110 Renewing glass panes, with wooden fillets wherever necessary: 14.6.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (D.S.R.2023,Vol.2,Code-14.6)14.6.2 111 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (D.S.R.2023,Vol.2,Code-14.7)14.7.1 112 Renewing glass panes and refixing existing wooden fillets: 14.7.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm (D.S.R.2023,Vol.2,Code-14.7)14.7.2 113 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets (D.S.R.2023,Vol.2,Code-14.8)14.8.1 114 Supplying and fixing new wooden fillets wherever necessary: 14.8.2 Hollock wood fillets (D.S.R.2023,Vol.2,Code-14.8)14.8.2 115 Renewal of old putty of glass panes (length (D.S.R.2023,Vol.2,Code-14.9) 116 Refixing old glass panes with putty and nails (D.S.R.2023,Vol.2,Code-14.10) 117 Fixing old glass panes with wooden fillets (excluding cost of fillets)(D.S.R.2023,Vol.2,Code-14.11) 118 Providing and fixing 25 mm thick shutters for cup board etc. : 14.26.1 Panelled or panelled & glazed shutters : 14.26.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (D.S.R.2023,Vol.2,Code-14.26)14.26.1.1 119 Providing and fixing 25 mm thick shutters for cup board etc. : 14.26.1 Panelled or panelled & glazed shutters : 14.26.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (D.S.R.2023,Vol.2,Code-14.26)14.26.1.2 120 Providing and fixing 25 mm thick shutters for cup board etc. : 14.26.2 Glazed shutters :14.26.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.(D.S.R.2023,Vol.2,Code-14.26)14.26.2.1 121 Providing and fixing 25 mm thick shutters for cup board etc. : 14.26.2 Glazed shutters :14.26.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.(D.S.R.2023,Vol.2,Code-14.26)14.26.2.2 122 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.28.1 20 mm diameter. (D.S.R.2023,Vol.2,Code-14.28)14.28.1 123 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.28.2 25 mm diameter. (D.S.R.2023,Vol.2,Code-14.28)14.28.2 124 Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 14.31.1 150 mm (D.S.R.2023,Vol.2,Code-14.31)14.31.1 125 Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 14.31.2 125 mm (D.S.R.2023,Vol.2,Code-14.31)14.31.2 126 Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 14.31.3 100 mm (D.S.R.2023,Vol.2,Code-14.31)14.31.3 127 Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete : 14.32.1 150 mm (D.S.R.2023,Vol.2,Code-14.32)14.32.1 128 Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete : 14.32.2 125 mm (D.S.R.2023,Vol.2,Code-14.32)14.32.2 129 Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete : 14.32.3 100 mm (D.S.R.2023,Vol.2,Code-14.32)14.32.3 130 Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete : 14.33.1 250 mm (D.S.R.2023,Vol.2,Code-14.33)14.33.1 131 Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete : 14.33.2 150 mm (D.S.R.2023,Vol.2,Code-14.33)14.33.2 132 Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete : 14.33.3 100 mm (D.S.R.2023,Vol.2,Code-14.33)14.33.3 133 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete (D.S.R.2023,Vol.2,Code-14.34) 134 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (D.S.R.2023,Vol.2,Code-14.75A) 135 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm (D.S.R.2023,Vol.2,Code-14.77) 136 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. (D.S.R.2023,Vol.2,Code-14.78) 137 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (D.S.R.2023,Vol.2,Code-14.79) 138 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 14.80.1 Long pattern W.C Pan of size 580x440 mm (D.S.R.2023,Vol.2,Code-14.80)14.80.1 139 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (D.S.R.2023,Vol.2,Code-14.81) 140 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge (D.S.R.2023,Vol.2,Code-14.82) 141 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.(D.S.R.2023,Vol.2,Code-14.85) 142 Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).(D.S.R.2023,Vol.2,Code-14.86) 143 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). (D.S.R.2023,Vol.2,Code-14.87) 144 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix(D.S.R.2023,Vol.2,Code-15.2)15.2.2 145 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge (D.S.R.2023,Vol.2,Code-15.3) 146 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar (D.S.R.2023,Vol.2,Code-15.7)15.7.4 147 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):15.8.3 From brick work in cement mortar (D.S.R.2023,Vol.2,Code-15.8)15.8.3 148 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 15.10.2 i n cement mortar (D.S.R.2023,Vol.2,Code-15.10)15.10.2 149 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below(D.S.R.2023,Vol.2,Code-15.12)15.12.1 150 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.2 Of area beyond 3 sq. Metres(D.S.R.2023,Vol.2,Code-15.12)15.12.2 151 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. (D.S.R.2023,Vol.2,Code-15.19) 152 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm(D.S.R.2023,Vol.2,Code-15.23)15.23.1 153 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 For thickness of tiles above 25 mm and up to 40 mm (D.S.R.2023,Vol.2,Code-15.23)15.23.2 154 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of: 15.34.1 T or L iron or pipe(D.S.R.2023,Vol.2,Code-15.34)15.34.1 155 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of: 15.34.2 R.C.C.(D.S.R.2023,Vol.2,Code-15.34)15.34.2 156 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.39.1 Up to 10 mm thick (D.S.R.2023,Vol.2,Code-15.39)15.39.1 157 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.39.2 Thickness above 10 mm up to 25 mm(D.S.R.2023,Vol.2,Code-15.39)15.39.2 158 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :15.39.3 Thickness above 25 mm up to 40 mm(D.S.R.2023,Vol.2,Code-15.39)15.39.3 159 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.42.1 75 to 80 mm dia pipe( D.S.R.2023,Vol.2,Code-15.42)15.42.1 160 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :15.42.2 100 mm dia pipe (D.S.R.2023,Vol.2,Code-15.42)15.42.2 161 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :15.42.3 150 mm dia pipe (D.S.R.2023,Vol.2,Code-15.42)15.42.3 162 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 15.45.1 Up to 150 mm diameter (D.S.R.2023,Vol.2,Code-15.45)15.45.1 163 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 15.45.2 Above 150 mm dia up to 300 mm dia (D.S.R.2023,Vol.2,Code-15.45)15.45.2 164 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 15.45.3 Above 300 mm diameter (D.S.R.2023,Vol.2,Code-15.45)15.45.3 165 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(D.S.R.2023,Vol.2,Code-15.56) 166 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (D.S.R.2023,Vol.2,Code-15.57) 167 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 16.70.1 Made of G.I. wire of dia 4 mm (D.S.R.2023,Vol.2,Code-16.70)16.70.1 168 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade (D.S.R.2023,Vol.2,Code-16.70)16.70.2 169 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.(D.S.R.2023,Vol.2,Code-16.71) 170 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. (D.S.R.2023,Vol.2,Code-16.72) 171 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (D.S.R.2023,Vol.2,Code-16.83) 172 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). (D.S.R.2023,Vol.2,Code-16.84) 173 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.(D.S.R.2023,Vol.2,Code-16.89) 174 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (D.S.R.2023,Vol.2,Code-16.91)16.91.1 175 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.2 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.(D.S.R.2023,Vol.2,Code-16.91)16.91.2 176 Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. (D.S.R.2023,Vol.2,Code-16.93) 177 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (D.S.R.2023,Vol.2,Code-17.1)17.1.1 178 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid (D.S.R.2023,Vol.2,Code-17.2)17.2.1 179 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid (D.S.R.2023,Vol.2,Code-17.3)17.3.1 180 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern(D.S.R.2023,Vol.2,Code-17.4)17.4.1 181 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern(D.S.R.2023,Vol.2,Code-17.5)17.5.1 182 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern(D.S.R.2023,Vol.2,Code-17.6)17.6.1 183 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (D.S.R.2023,Vol.2,Code-17.7)17.7.1 184 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (D.S.R.2023,Vol.2,Code-17.7)17.7.2 185 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer(D.S.R.2023,Vol.2,Code-17.7A) 186 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm(D.S.R.2023,Vol.2,Code-17.9)17.9.1 187 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 17.10.2.1 610x510mm bowl depth 200 mm (D.S.R.2023,Vol.2,Code-17.10.2)17.10.2.1 188 Providing and fixing white vitreous china water closet squatting pan (Indian type) : 17.13.1 Long pattern W.C. pan of size 580 mm (D.S.R.2023,Vol.2,Code-17.13)17.13.1 189 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan (D.S.R.2023,Vol.2,Code-17.15) 190 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (D.S.R.2023,Vol.2,Code-17.16A) 191 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 17.19.1 10 litre (full flush) capacity-white (D.S.R.2023,Vol.2,Code-17.19)17.19.1 192 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 17.19.2 10 litre (full flush) capacity-coloured (D.S.R.2023,Vol.2,Code-17.19)17.19.2 193 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.20.1 White solid plastic seat with lid (D.S.R.2023,Vol.2,Code-17.20)17.20.1 194 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.(D.S.R.2023,Vol.2,Code-17.22) 195 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (D.S.R.2023,Vol.2,Code-17.22A) 196 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia (D.S.R.2023,Vol.2,Code-17.22B)a 197 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (D.S.R.2023,Vol.2,Code-17.23) 198 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. (D.S.R.2023,Vol.2,Code-17.24) 199 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.1 32 mm dia. (D.S.R.2023,Vol.2,Code-17.28)17.28.2.1 200 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.S.R.2023,Vol.2,Code-17.31) 201 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete (D.S.R.2023,Vol.2,Code-17.78) 202 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (D.S.R.2023,Vol.2,Code-17.80) 203 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (D.S.R.2023,Vol.2,Code-17.81) 204 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.1 15 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.7)18.7.1 205 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall18.7.2 20 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.7)18.7.2 206 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall18.7.3 25 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.7)18.7.3 207 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.8)18.8.1 208 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.2 20 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.8)18.8.2 209 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.3 25 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.8)18.8.3 210 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.1 15 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.9)18.9.1 211 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.2 20 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.9)18.9.2 212 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.3 25 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.9)18.9.3 213 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.4 32 mm nominal dia Pipes (D.S.R.2023,Vol.2,Code-18.9)18.9.4 214 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.1 15 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.10)18.10.1 215 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.2 20 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.10)18.10.2 216 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.3 25 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.10)18.10.3 217 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.4 32 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.10)18.10.4 218 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 18.11.1 15 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.11)18.11.1 219 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 18.11.2 20 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.11)18.11.2 220 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.1 15 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.1 221 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.2 20 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.2 222 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.3 25 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.3 223 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.4 32 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.4 224 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.5 40 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.5 225 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.6 50 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.6 226 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.7 65 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.7 227 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.8 80 mm dia nominal bore (D.S.R.2023,Vol.2,Code-18.12)18.12.8 228 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.13.1 25 to 40 mm nominal bore (D.S.R.2023,Vol.2,Code-18.13)18.13.1 229 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.13.2 50 to 80 mm nominal bore (D.S.R.2023,Vol.2,Code-18.13)18.13.2 230 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). (D.S.R.2023,Vol.2,Code-18.14) 231 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore (D.S.R.2023,Vol.2,Code-18.17)18.17.1 232 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1A 20 mm nominal bore (D.S.R.2023,Vol.2,Code-18.17)18.17.1A 233 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.2 32 mm nominal bore. (D.S.R.2023,Vol.2,Code-18.17)18.17.2Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.2 32 mm nominal bore. (D.S.R.2023,Vol.2,Code-18.17)18.17.2 234 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.3 40 mm nominal bore. (D.S.R.2023,Vol.2,Code-18.17)18.17.3 235 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.4 50 mm nominal bore (D.S.R.2023,Vol.2,Code-18.17)18.17.4 236 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.5 65 mm nominal bore (D.S.R.2023,Vol.2,Code-18.17)18.17.5 237 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.6 80 mm nominal bore (D.S.R.2023,Vol.2,Code-18.17)18.17.6 238 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.1 15 mm nominal bore (D.S.R.2023,Vol.2,Code-18.18)18.18.1 239 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.2 20 mm nominal bore (D.S.R.2023,Vol.2,Code-18.18)18.18.2 240 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.3 25 mm nominal bore (D.S.R.2023,Vol.2,Code-18.18)18.18.3 241 Providing and fixing gun metal non- return valve of approved quality (screwed end) :18.19.4 50 mm nominal bore18.19.4.2 Vertical (D.S.R.2023,Vol.2,Code-18.19)18.19.4.2 242 Providing and fixing gun metal non- return valve of approved quality (screwed end) :18.19.6 80 mm nominal bore18.19.6.2 Vertical (D.S.R.2023,Vol.2,Code-18.19)18.19.6.2 243 Providing and fixing uplasticised PVC connection pipe with brass unions :18.21.2 45 cm length18.21.2.1 15 mm nominal bore (D.S.R.2023,Vol.2,Code-18.21)18.21.2.1 244 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 100 mm diameter18.31.1.2 Class II (D.S.R.2023,Vol.2,Code-18.31)18.31.1.2 245 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 18.31.3 150 mm diameter18.31.3.2 Class II (D.S.R.2023,Vol.2,Code-18.31)18.31.3.2 246 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (D.S.R.2023,Vol.2,Code-18.33)18.33.1 247 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.34.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (D.S.R.2023,Vol.2,Code-18.34)18.34.1 248 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.42.3 Beyond 12 m and up to 18 m depth (D.S.R.2023,Vol.2,Code-18.42)18.42.3 249 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 18.46.1 15 mm nominal bore.(D.S.R.2023,Vol.2,Code-18.46)18.46.1 250 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.2 20 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.2 251 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.3 25 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.3 252 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.4 32 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.4 253 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.5 40 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.5 254 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.6 50 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.6 255 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.7 65 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.7 256 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :18.46.8 80 mm nominal bore (D.S.R.2023,Vol.2,Code-18.46)18.46.8 257 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.1 15 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.1 258 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.2 20 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.2 259 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.3 25 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.3 260 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.4 32 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.4 261 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.5 40 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.5 262 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.6 50 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.6 263 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.7 65 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.7 264 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.8 80 mm nominal bore (D.S.R.2023,Vol.2,Code-18.47)18.47.8 265 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (D.S.R.2023,Vol.2,Code-18.48) 266 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore (D.S.R.2023,Vol.2,Code-18.49)18.49.1 267 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 15 mm nominal bore (D.S.R.2023,Vol.2,Code-18.50)18.50.1 268 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore (D.S.R.2023,Vol.2,Code-18.51)18.51.1 269 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore(D.S.R.2023,Vol.2,Code-18.52)18.52.1 270 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore (D.S.R.2023,Vol.2,Code-18.53)18.53.1 271 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (D.S.R.2023,Vol.2,Code-18.53)18.53A 272 Providing and fixing PTMT bib cock of approved quality and colour.18.54.4 15 mm nominal bore, 90 mm long, weighing not less than 93 gms(D.S.R.2023,Vol.2,Code-18.54)18.54.4 273 Providing and fixing PTMT stop cock of approved quality and colour.18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms (D.S.R.2023,Vol.2,Code-18.55)18.55.3 274 Providing and fixing PTMT pillar cock of approved quality and colour.18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms (D.S.R.2023,Vol.2,Code-18.56)18.56.2 275 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms (D.S.R.2023,Vol.2,Code-18.63) 276 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms (D.S.R.2023,Vol.2,Code-18.64) 277 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms(D.S.R.2023,Vol.2,Code-18.65) 278 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :18.73.1 100 mm dia Ductile Iron Double Flanged (D.S.R.2023,Vol.2,Code-18.73)18.73.1 279 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :18.73.2 150 mm dia Ductile Iron Double Flanged (D.S.R.2023,Vol.2,Code-18.73)18.73.2 280 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length (D.S.R.2023,Vol.2,Code-18.74)18.74.1 281 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.18.74.2 15 mm nominal bore with 45 cm length (D.S.R.2023,Vol.2,Code-18.74)18.74.2 282 Cutting holes up to 30x30 cm in walls including making good the same: 18.76.1 With common burnt clay F.P.S. (non modular) bricks(D.S.R.2023,Vol.2,Code-18.76)18.76.1 283 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. (D.S.R.2023,Vol.2,Code-18.77) 284 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc (D.S.R.2023,Vol.2,Code-18.78) 285 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. (D.S.R.2023,Vol.2,Code-18.79) 286 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 18.82.1 80 mm diameter C.I. pipe (D.S.R.2023,Vol.2,Code-18.82)18.82.1 287 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 18.82.2 100 mm diameter C.I. pipe (D.S.R.2023,Vol.2,Code-18.82)18.82.2 288 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 18.84.1 15 mm nominal bore(D.S.R.2023,Vol.2,Code-18.84)18.84.1 289 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 19.5.1 100 mm diameter (D.S.R.2023,Vol.2,Code-19.5)19.5.1 290 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 19.5.2 150 mm diameter (D.S.R.2023,Vol.2,Code-19.5)19.5.2 291 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (D.S.R.2023,Vol.2,Code-19.7)19.7.1.1 292 Supplying and fixing C.I. cover without frame for manholes : 19.18.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg (D.S.R.2023,Vol.2,Code-19.18)19.18.1 293 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg (D.S.R.2023,Vol.2,Code-19.20) 294 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.21.1 For pipes 100 to 250 mm diameter (D.S.R.2023,Vol.2,Code-19.21)19.21.1 295 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in-charge: 19.24.1 Rectangular manhole 90x80 cm and 45 cm deep (D.S.R.2023,Vol.2,Code-19.24)19.24.1 296 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(D.S.R.2023,Vol.2,Code-19.29)19.29.1 297 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (D.S.R.2023,Vol.2,Code-19.32)19.32.1 298 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.34.1 100 mm dia (D.S.R.2023,Vol.2,Code-19.34)19.34.1 299 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :19.34.2 150 mm dia (D.S.R.2023,Vol.2,Code-19.34)19.34.2 300 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)(D.S.R.2023,Vol.2,Code-21.1)21.1.1.1 301 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (D.S.R.2023,Vol.2,Code-21.1)21.1.1.2 302 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron (D.S.R.2023,Vol.2,Code-21.1)21.1.1.3 303 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (D.S.R.2023,Vol.2,Code-21.1.2)21.1.2.1 304 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (D.S.R.2023,Vol.2,Code-21.1.2)21.1.2.2 305 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (D.S.R.2023,Vol.2,Code-21.1.2)21.1.2.3 306 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side (D.S.R.2023,Vol.2,Code-21.2)21.2.1 307 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. 21.2.2 Pre-laminated particle board with decorative lamination on both sides(D.S.R.2023,Vol.2,Code-21.2)21.2.2 308 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(D.S.R.2023,Vol.2,Code-21.3)21.3.1 309 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (D.S.R.2023,Vol.2,Code-21.3)21.3.2 310 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)(D.S.R.2023,Vol.2,Code-21.3)21.3.3 311 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness(D.S.R.2023,Vol.2,Code-21.4)21.4.1 312 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.2 With brass cover plate minimum 1.25 mm thickness (D.S.R.2023,Vol.2,Code-21.4)21.4.2 313 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar (D.S.R.2023,Vol.2,Code-21.12)21.12.3 314 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharge21.16.3 Polyester powder coated minimum thickness 50 micron aluminium(D.S.R.2023,Vol.2,Code-21.16)21.16.3 315 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). (D.S.R.2023,Vol.2,Code-21.17) 316 Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) (D.S.R.2023,Vol.2,Code-21.18) 317 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm (D.S.R.2023,Vol.2,Code-22.3) 318 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (D.S.R.2023,Vol.2,Code-22.5) 319 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. (D.S.R.2023,Vol.2,Code-22.6) 320 Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre per sqm. (D.S.R.2023,Vol.2,Code-22.12) 321 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (D.S.R.2023,Vol.2,Code-22.14)22.14.1 322 Grading roof for water proofing treatment with22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand)(D.S.R.2023,Vol.2,Code-22.14)22.14.2 323 Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge (D.S.R.2023,Vol.2,Code-22.22A) 324 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.23.1 For vertical surface two coats @ 0.70 kg per sqm (D.S.R.2023,Vol.2,Code-22.23)22.23.1 325 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.23.2 For horizontal surface one coat @1.10 kg per sqm.(D.S.R.2023,Vol.2,Code-22.23)22.23.2 326 Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.(D.S.R.2023,Vol.2,Code-22.23A) 327 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures likebasement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturers specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (D.S.R.2023,Vol.2,Code-22.24) 328 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.(D.S.R.2023,Vol.2,Code-22.26) 329 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- inCharge. (D.S.R.2023,Vol.2,Code-25.4) 330 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. (D.S.R.2023,Vol.2,Code-25.8) 331 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate crossT of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.23.1 With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles(D.S.R.2023,Vol.2,Code-26.23)26.23.1 332 Supplying chemical emulsion in sealed containers including delivery as specified. 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (D.S.R.2023,Vol.1,Code-2.34)2.34.1 333 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (D.S.R.2023,Vol.1,Code-2.35)2.35.1.1 334 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration(D.S.R.2023,Vol.1,Code-2.35)2.35.2.1 335 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (D.S.R.2023,Vol.1,Code-2.35)2.35.3.1 336 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : 2.35.4.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (D.S.R.2023,Vol.1,Code-2.35)2.35.4.1 337 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (D.S.R.2023,Vol.1,Code-2.35)2.35.5 338 Cleaning of Chocked Main Holes of Sever lines including supply of all materials,Labour,T&P e.t.c. 339 Emptying and Cleaning of Septic Tank including labours,tools,and Machines e.t.c. 340 S/F of I.S.I. Marked Cistern function cylinder of wall mounted Europian Type W.C.Sheet including supply of all materials,Labour,T&P e.t.c. Make-Hindware,Pareware Please Enable Macros to View BoQ information
Contract Date: Jan 13, 2026 Contract Value : ₹ 2.22 Lakh
Boards / Undertakings / PSU No of Bidders 5
Uttar Pradesh View Result →
23.
Educational and Research Institute #9427508 Technical Bid
Supply Of Consumables/Non-Consumables For The Department Of Surgery , Consumables , Stoma Paste Hydrocolloid Based Skin Protection Paste - 50Gms , Disposable Single Piece Stomabag (Scissor Free Triple Hydrocolloid Based Cut To Fit Modified Flexible Tape Collor Skin Barrier With Elastomeric Polymers With 12 Pouch, 1-Sided Comfort Panel, Invisiclose Tail Closure And Charcoal Filter Suitable For 57-70 Mm Stoma) , Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved Assorted Sizes (9 X 25 Cm, 9 X 30Cm) , Cotton Soft Ostomy Appliance Belt Meant To Be Connected To A 2 Piece Pouch , Bag Urostomy,Single Piece , Lubricating Multi Purpose Deoderiser For Stoma Bag , Hydrocolloid Based Skin Protection Powder -28 Gms , Stoma Bag Supporting Belt (Cotton Soft Ostomy Appliance Belt Meant To Be Connected To A 2 Piece Pouch) , Sting Free Barrier Spray With 100% Blend Of Hexamethyldisiloxane, Hmdso, Trimethylated Silica, Trimethylsiloxysilicate (Tms) And Zanthalene Sting Free. Hypoallergic, Clear With Flexible Barrier. Provides On Going Protection For 72 Hours & Chg Compatible, Free From Oil, Alcohol, Fragrance & Preservatives. , Sting Free Adhesive Releaser/ Remover Spray With 100% Blendof Hexamethyldisiloxane, Hmdso, Octamethyltrisiloxane, Sting Free, Clear With Flexible Film Free From Alcohol, Preservatives Used For Removal Of Strong Adhesive Dressings, Helps In Removal Withour Pain & Skin Tear - 50Ml , Protective Sheets For Skin Barrier Wounds Of Stoma, Size - 20X20 Cm , Wound Manager Post-Op Bag With Attached Lid Spiral Adhesive Sizes - 10 Mm To 100 Mm , Wound Manager Post-Op Bag With Attached Lid Spiral Adhesive Sizes -10-75Mm , Sengstaken Blakemore Tube 14 Fr Size , Sengstaken Blakemore Tube 16 Fr Size , Sengstaken Blakemore Tube 18 Fr Size , Polyurethane Foam For Vacuum Assisted Closure/ Negative Pressure Wound Dressing Medium Size- 10 X 15 Cm , Hydrocolloid Dressing For Wound Management 15 X 15 Cm , Alginate Dressing For Wound Management 15 X 15 Cm , Disposable Abdominal Drain Catheter With Collection Bag 16Fr , Disposable Abdominal Drain Catheter With Collection Bag 18Fr , Disposable Abdominal Drain Catheter With Collection Bag 20Fr , Disposable Abdominal Drain Catheter With Collection Bag 28Fr , Disposable Abdominal Drain Catheter With Collection Bag 30Fr , Disposable Abdominal Drain Catheter With Collection Bag 32Fr , Sterile Disposable Pigtail Drainage Catheter 12 Fr , Sterile Disposable Pigtail Drainage Catheter 14 Fr , Yankaur Suction Set With Moulded Yankaur Handle Attached With 2.5 Meter Kink Resistant Tube. Length 250 Cm (2.5 Meter) And Diameter 9.00 Mm (27 Fg) With Universal Connectors On Both Ends Of The Tube To Accommodate The Suction Tip On One End And All Type Of Connectors Of Suction Apparatus At The Other End For Operating Room Vaccum Assisted Suction , Yankaur Suction Tip - Fine, Length: 250Mm With 2 Holesand With Vacuum Control Attachable With Above Suction Tube , Yankaur Suction Tip - Maxi, Length: 250Mm With 4 Holesand With Vacuum Control Attachable With Above Suction Tube , Abdominal Carcet/ Binder Medium/Large 46” - 62” Size With12 Width , Abdominal Corset/ Binder Large Size 63” - 74” With12 Width , Elastic Crep Bandage Length 4M, Width 10 Cm , Adult, Adjustable Venturi Mask Kit With Adjustable O2 Concentration , Disposable Proctoscope Set, Adult Size 70Mm Effective Length X 22Mm Diameter , Iodine Coated Steri Drapes 250 X 300 Cm , Automatic Spring Loaded Soft Tissue Biopsy System With Cutting Length 14 Gaugecms And Length Of Needle 10 Cms , Automatic Spring Loaded Soft Tissue Biopsy System With Cutting Length 16 Gaugecms And Length Of Needle 10 Cms , Automatic Core Biopsy Gun – 16G X 16Cm Should Be Spring Loaded Fully Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Sample Notch For Enhanced Needle Action. Instrument Should Have Choice Of Two Firing Buttons. One On The Body And One On The Rear End Should Have Double Press Cocking Mechanism, Should Have Penetration Depth Of 22Mm And Core Sample Should Be 19Mm , Fistula And Wound Management System-Wound Manager With Double-Layer Adhesive Barrier And Pouch, Tracing Guide, Removable Lid, Drain Port And A Clamp , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure(Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film.10X20 Cm , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure(Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film.15 X 19 Cm , Non Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi-Permeable .Patented Release Profile Of Ionic Silver Upto 7 Days.Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds And Burn Cases. 10 X 10Cm , Non Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi-Permeable .Patented Release Profile Of Ionic Silver Upto 7 Days.Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds And Burn Cases. 15 X 15Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable .Patented Release Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds .15 X 19Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable .Patented Release Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds .15 X 15 Cm , Highly Absorbent Polyurethane Foam Dressing For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure(Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film.10 X 10Cm , Calcium Alginate Dressing With 65-75 % Guluronic Acid , Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption. For Managing Sloughy Wounds With Cavity . 10 X 10Cm , Hydrogel Consisting Of Natural Ingredients Such As Highly Purified Water, Sodium Carboxy-Methylcellulose And Calcium Alginate Without Any Additives. For Effective And Gentle Autolytic Debridement Of Necrotic Tissue , Dry And Sloughy Necrotic Wounds. 15 Gm , Hydrocolloid Dressing Containing Calcium Alginate + Carboxy Methyl Cellulose With High Absorption Efficiency , Semi Permeable Waterproof And Bacteria Proof Top Film, Unique Dressing Change Indicator , Wound Mapping Grid Pattern , Free From Pectin Or Gelatin.For Managing Medium To Low Exuding Wounds . 15 X 15Cm , Thin Hydrocolloid Dressing With High Permeability Capabilities & Waterproof , Transparent, Wound Mapping Grid Pattern , Free From Pectin Or Gelatin. For Managing Low Exuding Wounds.10 X 10Cm , Thin Hydrocolloid Dressing With High Permeability Capabilities & Waterproof , Transparent, Wound Mapping Grid Pattern , Free From Pectin Or Gelatin. For Managing Low Exuding Wounds.5 X 25Cm , Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc) ,Petroleum Jelly, Polymers And Silver Salts Using Patented Lipido- Colloid Technology (Tlc) 10X12cm, , Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc) ,Petroleum Jelly, Polymers And Silver Salts Using Patented Lipido- Colloid Technology (Tlc) 15X20cm, , Sterilenon-Occulusive Wound Contact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc) ,Petroleum Jelly, Polymers And Silver Salts Using Patented Lipido- Colloid Technology (Tlc) 20X40 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres.6X6 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres.10X10 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres. 15X20 Cm , Ot Consumables , Patient Restrainerpolyester Strap With Adjustable Buckle,Universal Size (Ankle/Hand Cuff) , Urinary Drainage Bag (Urometer) For Collection Of Urine From Foley Catheter With Volume Measurement Compartment Separate From Bag Lines For As Little As 50 Ml So That Hourly Urine Output Can Be Monitored, Non-Return Valve And Transparent. , Bipolar Forceps For Diathermy Machine Straightcompatible Forerbe ,Excel, Shelarak And Valleylab , Cable For Bipolar Forceps Compatible Forerbe ,Excel, Shelarak And Valleylab , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Verbe ,Excel, Shelarak And Valleylab Bipolar Machine Along With Cable (Demo Required) , Bipolar Forceps Bayoneted (Micro Tip Non Stick, Compatible With Erbe ,Excel, Shelarak And Valleylab Bipolar Machine Along With Cable (Demo Required) , Bipolar Forceps Straight(Standard Tip Non Stick, Compatible With Erbe ,Excel, Shelarak And Valleylab Bipolar Machine Along With Cable (Demo Required) , Bipolar Forcepsstraight (Micro Tip Non Stick, Compatible With Erbe ,Excel, Shelarak And Valleylab Bipolar Machine Along With Cable (Demo Required) , Neutral Plate Twin, With Sensor For Complete Circuit Compatible With Erbe ,Excel, Shelarak And Valleylab Diathermy Machine, Disposable , Thromoembolism Stocking Lycra Containing Thromboembolism Prevention Stocking, Thigh To Ankle Level, Various Sizes For Patients In Icu, Immobile Patients. It Should Have Graduated Pressure Fit. Snug Fit. Exact Number Of Each Sizes Will Be Mentioned At The Time Of Purchase Order , Universal Camera Drape 18X250 Cms Telescopic Folding, Separate Tape Strip , Band Aid Wash Proof , Asepto Syringe , Surgeon Gown (Medium Size) Which Is A Fully Wrap Around Variety And Can Be Tied In Front, With Water, Alcohol Resistance. Outer Layer Spun Bound Repellant Layer With Inner Two Layers With Antibacterial Property (Melt Blown), And Innermost Layer For Fabric Strength (Spun Bound) Soft Elastic Wrist Cuff. Adjustable Neck Line Needed. Low Linting. Sample Absolutely Required. Must Meet Or Exceed En13795 Standards Or Else Will Not Be Considered.Quote Separately For Tape Covered Double-Stitched Seam Type Gown As Well As The One With Ultrasound Bonded Seam , Disposable Sheet For Large Tray Set (67X67 Inches) And(52X30 Inches) , Disposable Sheet For Small Tray Set (32X32 Inches) And(12X8 Inches) , Disposable Trolley Sheet (65X62 Inches) And(50X50 Inches) , Disposable Mayo Cover (32X32 Inches) , Drape Laparotomy,Sterile, Disposable - Consists Of Re-Inforced Mayo Stand Cover 120Cm/140Cm, Utility Drape Four Pieces 75/50 Cm, Transverse Drape 200/150 Cm,Head End Curtain 200/150 Cm, Hole Sheet 300/150 Cm And Tube Organiser , Tube Organiser Drape - Sticky Type , Open Intra Peritoneal Umbilicalhernia Mesh Patch With Absorbable Hydrogel Barrier, Straps,Positioning Pockets , Pdo Sorbaflex Memory Ring On One Side And Light Weight Polypropylene Mesh On The Other. Size 8 Cmx8 Cm , Elastic Vessel Loop For Retracting Vessels During Surgery Red Colour , Elastic Vessel Loop For Retracting Vessels During Surgery Blue Colour , Elastic Vessel Loop For Retracting Vessels During Surgery Green Colour , Sterile Disposable Diathermy Cable With Hand Control Probe Pencil And Cautery Scratchpad/ Tip Cleaner , Curved Circular Stapler 25Mm With Universal Closed Staple Height Ranges 1.5Mm-2.0Mm , Curved Circular Stapler 28Mm With Universal Closed Staple Height Ranges 1.5Mm-2.0Mm , Curved Circular Stapler 31Mm With Universal Closed Staple Height Ranges 1.5Mm-2.0Mm , Curved Circular Stapler 33Mm With Universal Closed Staple Height Ranges 1.5Mm-2.0Mm , Curved Circular Stapler 25Mm With Universal Closed Staple Height Ranges 1Mm-2.5Mm , Curved Circular Stapler 29Mm With Universal Closed Staple Height Ranges 1Mm-2.5Mm , Curved Circular Stapler 33Mm With Universal Closed Staple Height Ranges 1Mm-2.5Mm , Curved Cutter Stapler 40 Mm With 4 Staple Rows For Low Anterior Recession With Green Reload With Open Staple Height 4.7Mm And Closed Staple Height 2Mm , Green Reload For The Above 40Mmcurved Cutter Stapler For Low Anterior Recession , Curved Cutter Stapler 40Mm With 4 Staple Rows For Low Anterior Recession With Blue Reload With Open Staple Height 3.5Mm And Closed Staple Height 1.44 Mm , Blue Reload For The Above 40Mm Curved Cutter Stapler For Low Anterior Recession , Linear Cutter 55 Mm 3 Staggered Row With Selectable Staple Height , 3 Staggered Reloads For Linear Cutter 55Mm, Compatible With Above Linear Cutter , Linear Cutter 75 Mm 3 Staggered Row With Selectable Staple Height , 3 Staggered Reloads For Linear Cutter 75Mm, Compatible With Above Linear Cutter , Linear Cutter 100 Mm Inbuilt Knifewith 2.0Mm Cartridge , Green 2.0Mm Reloads For Linear Cutter 100Mm, Compatible With Above Linear Cutter , Hemorrhoidalcircular Stapler Set With Variable Closed Height Ranges From 0.75Mm-1.5Mm , Open Disposable Largeclip Applier With20 Preloaded Large Clips With 13 Inch Shaft Length , Open Disposable Mediumclip Applier With30 Preloaded Medium Clips With 11 Inch Shaft Length , Small Titanium Alloy Clip Reloads Compatible With Reusable Multipatient Single Clip Applier. , Skin Marking Pen For Preoperative Sugical Site Marking , Disposable Neutral Plate Compatyible With Force Triad Valley Lab , Skin Grafting Blades , Collagen Sheet- 15 X 30 Cm , Monopolar Cable Compatible With Erbe , Lone Star Retractor Disposable , Haemorrhoidal Multi-Band Ligator With Tri-View Anoscope , Battery Operated Circular Stapler Having Disposable Battery Pack With Gripping Surface Technology And 3D Stapling Technology With Detachable Anvil Andadjustable Closed Staple Height Of 1.5 - 2.2 Mm And Open Leg Length Of 5.2Mm Having Staple Housing Outer Diameter 23Mm And Two Staple Rows , Battery Operated Circular Stapler Having Disposable Battery Pack With Gripping Surface Technology An 3D Stapling Technology With Detachable Anvil Andadjustable Closed Staple Height Of 1.5 - 2.2 Mm And Open Leg Length Of 5.2Mm Having Staple Housing Outer Diameter 25Mm And Two Staple Rows , Battery Operated Circular Stapler Having Disposable Battery Pack With Gripping Surface Technology An 3D Stapling Technology With Detachable Anvil Andadjustable Closed Staple Height Of 1.5 - 2.2 Mm And Open Leg Length Of 5.2Mm Having Staple Housing Outer Diameter 29Mm And Two Staple Rows , Battery Operated Circular Stapler Having Disposable Battery Pack With Gripping Surface Technology An 3D Stapling Technology With Detachable Anvil Andadjustable Closed Staple Height Of 1.5 - 2.2 Mm And Open Leg Length Of 5.2Mm Having Staple Housing Outer Diameter 31Mm And Two Staple Rows , Disposable Cautery Pencils (Ptfe Coated Electrosurgical Electrode) With Blade Tip & Hand Control - Twin Switch For Cutting & Coagulation Mode Controls Compatible To All Diathermy Machines, Or Universal Connector With Shaft Diameter Preferably Less Than 2.5 Mm. Appropriate Certificate Usfda/Isi Certificate For Electrical Safety , Synthetic Absorbable Sterilized Surgical Suture ( Braided), Coated Polyglactin 910,Size 0, 18 Inch Long Ligature In A Plastic Tube That Is Narrow At One End And Scored At Other End. Suture Is In The Form Of Ligature Loop With A Knot , Bipolar Cautery Pencil , Tri-Staple Gia 60Mm -Three Staggered Rows With In Build New Knife Blade Purple Medium/Thick Reload With Tri-Staple Technology Having Staple Height Of 3.0 Mm, 3.5 Mm, And 4.0 Mm , Tri-Staple Gia 60Mm-Three Staggered Rowswith In Build New Knife Blade Black Extra-Thick Reload With Tri-Staple Technology Having Staple Height Of 4.0 Mm, 4.5 Mm, And 5.0 Mm , Tri-Staple Gia 60Mm-Three Staggered Rowspurple Medium/Thick Gia Stapler With Tri-Staple Technology , Tri-Staple Gia 60Mm-Three Staggered Rowsblack Extra-Thick Gia Stapler With Tri-Staple Technology , Tri-Staple Gia 80Mm-Three Staggered Rowswith In Build New Knife Blade Purple Medium/Thick Reload With Tri-Staple Technology Having Staple Height Of 3.0 Mm, 3.5 Mm, And 4.0 Mm , Tri-Staple Gia 80Mm-Three Staggered Rowswith In Build New Knife Blade Black Extra-Thick Reload With Tri-Staple Technology Having Staple Height Of 4.0 Mm, 4.5 Mm, And 5.0 Mm , Tri-Staple Gia 80Mm-Three Staggered Rowspurple Medium/Thick Gia Stapler With Tri-Staple Technology , Tri-Staple Gia 80Mm-Three Staggered Rowsblack Extra-Thick Gia Stapler With Tri-Staple Technology , Silicon Breast Implant , Round, Smooth Base -8-12 Cm, Volume -300- 350 Cc,Projection 4-6 Cm , Silicon Breast Implant , Round, Smooth Base -8-12 Cm, Volume -351-400Cc,Projection 4-6 Cm , Silicon Breast Implant , Round, Smooth Base -8-12 Cm, Volume -200-300 Cc,Projection 4-6 Cm , Breast Expander, Round, Smooth Base -8-12Cm, Volume -300- 350 Cc,Projection 4-6 Cm , Breast Expander, Round, Smooth Base -8-12Cm, Volume -200-300 Cc,Projection 4-6 Cm , Breast Expander, Round, Smooth Base -8-12Cm, Volume -351-400Cc,Projection 4-6 Cm , Acellular Dermal Matrix , 1-3 Mm , 10-20 Cm *5-15 Cm , Highly Absorbent Cotton And Polyester Fibre Pad On One Side And A Very Thin Perforated Polyester Film Size 10 X 10 Cm , Hemostat Dressing Kaolin Impregnated For External Usage - Size 10 X 10 Cm , Silk Protein And Nanocrystalline Silver Based Sterile Water-Proof Transparent Pu Film Surgical Wound Dressing With Adhesive Border And Center Non-Adherent Pu Foam High Absorbent Layer 15X15cm , Centella Asiatica Extract Based Skin Moisturization And Antiscar Gel, Comprised Of Centella Asiatica Extract, Glycerol And Vitamin E - 30 Ml , Silk Protein And Nanocrystalline Silver Basedhighly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer - 10 Cm X 20 Cm , Silk Protein And Nanocrystalline Silver Basedhighly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer - 15 Cm X 15 Cm , Biomodified Silk Protein Based Wound Healing Sprinkling Powder,Comprised Of Silk Powder 8% And Asiaticoside Nlt 0.6% . Conforms To Any Wound Shape And Size, Easy To Apply - 50 Gm , Endoscopic Consumables , Rubber Inlet Seal For Olympus, Fuji, Pentax Scopes , Multiband Ligator With 6 Bands , Shooter For Endoscopic Multiband Ligator , Percutaneous Endoscopic Gastrostomy Kit (Peg Kit) 24Fr , Upper G.I Endoscopy Mouth Piece , Colonoscopic Polypectomy Snare , Biopsy Forceps Ugie With Spike , Biopsy Forceps Ugie Without Spike , Biopsy Forceps Colonoscopy With Spike , Biopsy Forceps Colonoscopy Without Spike , Ballon Dilatation Catheter 10-12 Mm , Ballon Dilatation Catheter 12-15 Mm , Ballon Dilatation Catheter 15-18 Mm , Sclerotherapy Needle , Savary Gilliard Guide Wire , Zebra Guide Wire , Achalasia Bolloon Catheter 30 Size , Achalasia Bolloon Catheter 35 Size , Achalasia Bolloon Catheter 40 Size , Achalasia Pump , Balloon Dilatation Inflation Device , Foreign Body Removal Forceps , Esophageal Stents (Covered) 10, 12, 15 Cm Each 20 Nos. , Cre Esophageal Balloon Dilator (Cre Esophageal Balloon Dilator, * Rounded Shoulders Balloon For Endoscopic Visualization During Procedure, Balloon Length 8Cm, * Sizes In Mm: (6-7-8, 8-9-10, 10-11-12, 12-13.5-15, 15-16.5,18,18-19-20 ) * In-Built Guidewire In The Catheter , Fully Covered Removable Esophageal Metal Stent (Permalume™ Covering Avoids The Risk Of Tumor Ingrowth, Braided Wire Construction Design With Coaxial Deployment System, 18.5 Fr Coaxial Delivery System With 28 Mm Flare And 23 Mm Body (Large Flare With No Migration Possibility), Recons Trainability Up To 75% Of The Stent Deployment, Stent Length - 10,12 & 15 Cm , Partially Covered Removable Esophageal Metal Stent (Permalume™ Covering Avoids The Risk Of Tumor Ingrowth, Braided Wire Construction Design With Coaxial Deployment System, 18.5 Fr Coaxial Delivery System With 23 Mm Flare And 18 Mm Body, Recons Trainability Up To 75% Of The Stent Deployment, Stent Length - 10,12 & 15 Cm , Tts Colonic Highly Flexible Metal Stent (Nitinol Treatment Offers Complete Mesh Visibility Under Fluoroscopy And Superior Radial Force In A Patented Design, Coaxial Deployment System, Stent Length 9 Or 12 Cm, Reconstrianbility Upto 70% Stent Deployment, 30 Mm Flare And 25Mm Body , Tts Duodenal Highly Flexible Metal Stent (Nitinol Treatment Offers Complete Mesh Visibility Under Fluoroscopy And Superior Radial Force In A Patented Design, Coaxial Deployment System, Stent Length - 6,9 And 12 Cm, 27 Mm Flare And 22Mm Body, Reconstrianbility Upto 70% Stent Deployment , Ercp Standard Straight Guidewire. Specifications: Should Have A Hydrophilic Tip Of 5 Cm, Shaft Should Be Made Of Nitinol To Prevent Kinking And Enable Good Wire Manipulation And Control, Should Havea Coating To Promote Smooth Tracking And Tactilesensation Of The Wire During Exchange, Should Contain Working Length Of 450 Cm, A.035 Inch And B.0.25 Inch , Ercp Sphincterotome With Tip Size A) 3.9 Fr. - 1 Nos. B) 4.4 Fr. - 2 Nos. Specifications: 1) Steerable Tip With Rotatable Handle. 2) Merged Lumen Technology. 3) Handle Brake To Keep Bow Memory , Inflator Syringe For Endoscopic Controlled Radial Expansion Balloon Dilator , Inflator Handle For Endoscopic Controlled Radial Expansion Balloon Dilator , Controlled Radial Expansion Dilation Balloon , Laprascopic Consumables , Polymer Ligation System - Clips(Like Hem-O-Lok) - Extra-Large , Polymer Ligation System - Clips(Like Hem-O-Lok) - Large , Polymer Ligation System - Clips(Like Hem-O-Lok) - Medium-Large , Disposable Laparoscopic Cautery Hook With Hand Control Function , Laparoscopic Vascular Bulldog Clip With Jaw Length Of 25Mm And 45Mm Both Straight And Curved Tip Compatible With Laparoscopic Vascular Bulldog Clip Applier Of Shaft Length 34 Cm With Diameter 12.5Mm Made Of Stainless Steel. , Anti-Fog Kit, Comprehensive System , Anti-Fog Solution , Bipolar Maryland Dissecting Forceps 5Mm 310Mm, Reusable & Autoclavable Made Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. , Compatible Diathermy Cable For Above Item To Fit Olympus Diathermy Machine , Laparoscopicbipolar Macro Forceps 5Mm, 31Cm Reusable & Autoclavable Made Of High Quality Stainless Steel The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din , Monopolar Laparpscopy Diathermy Cable To Fit Erbe/Olympus Diathermy Machine , Cannula 5Mm Smoothwith Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Cannula 5Mm With Bladedthreaded Trocar, Sterile & Disposable For Laparoscopy , Cannula 5Mm With Bladeless Threaded Trocar, Sterile & Disposable For Laparoscopy , Cannula 5Mm, 15Cm Long For Bariatric Surgery With Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Cannula 11 Mm Smoothwith Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Cannula 11 Mm Smoothwith Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Cannula 12 Mm Blunt Trocar, Sterile & Disposable , Cannula 12 Mm Smoothwith Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Cannula 12 Mm Smoothwith Bladeless Trocar, Sterile & Disposable For Laparoscopy , Cannula 12 Mm, Long 15Cm For Bariatric Surgery Smoothwith Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Cannula 15 Mm Smoothwith Bladeless Trocar, Sterile & Disposable For Laparoscopy , Cannula 15 Mm, Long 15Cm For Baiatric Surgery Smoothwith Bladeless Optical Trocar, Sterile & Disposable For Laparoscopy , Disposable Bladeless Trocar With Bird Wing Tip Design, 5Mm In Diameter, 95Mm Standard Sleeve Length, Self -Adjusting & Detachable Secondary Seal Which Can Accommodate Instruments Diameter Upto 5Mm , Disposable Bladeless Trocar With Bird Wing Tip Design, 10Mm In Diameter, 95Mm Standard Sleeve Length, Self -Adjusting & Detachable Secondary Seal Which Can Accommodate Instruments Diameter Ranging From 5Mm To 10Mm , Disposable Bladeless Trocar With Bird Wing Tip Design & Optical Entry Feature, 12Mm In Diameter, 95Mm Standard Sleeve Length, Self -Adjusting & Detachable Secondary Seal Which Can Accommodate Instruments Diameter Ranging From 5Mm To 12Mm , Disposable Bladeless Trocar With Bird Wing Tip Design, 15Mm In Diameter, 110Mm Standard Sleeve Length, Self -Adjusting & Detachable Secondary Seal Which Can Accommodate Instruments Diameter Ranging From 5Mm To 15Mm , Laparoscopic Fixation Device With Articulating Technology, Interchangeable Reloads, And Screw-Like Tack Designs For Hernia Repair , Arista Ah Flextip Xl Applicator Length 38Cm , Laprascopic Polymer Type Vascular Clip Large Size Compatible With Laprascopic Reusable And Autoclavable 10Mm Applier For Large Polymer Type Vasular Clip , Laprascopic Polymer Type Vascular Clip Medium-Large Size Compatible With Laprascopic Reusable And Autoclavable 10Mm Applier For Medium-Large Polymer Type Vasular Clip , Cleaning Pistol For Laparascopic Instruments , Cleaning Brush For Laparascopic Instruments , Minimally Invasive Access System- Hand Port For Hand Assisted Laparascopic Surgery-Seal-Cap Assembly , Minimally Invasive Access System- For Hand Assisted Laparascopic Surgeryfixed-Length Access Retractor — Small (<4 Cm) , Minimally Invasive Access System- For Hand Assisted Laparascopic Surgeryfixed-Length Access Retractor -Fixed-Length Access Retractor — Medium (4–7Cm) , Minimally Invasive Access System- For Hand Assisted Laparascopic Surgeryfixed-Length Access Retractor -Fixed-Length Access Retractor —Fixed-Length Access Retractor — Large (>7Cm) , Veress Laparoscopicdisposable Insufflation Needle With Aspring-Loaded, Blunt Stylet Safety Mechanism 14 Gauge, 120 Mm Length , Laparoscopic Sterile & Disposable 5 Mm Bladeless Trocar With Bilateral Tissue Separator- Sleeve And Obturator Set , Laparoscopic Sterile & Disposable 5Mm Sleeve Compatible For Above 5Mm Bladeless Trocar With Bilateral Tissue Seperator , Laparoscopic Sterile & Disposable 11 Mm Bladeless Trocar With Bilateral Tissue Separator- Sleeve And Obturator Set , Laparoscopic Sterile & Disposable 11 Mm Sleeve Compatible For Above 11Mm Bladeless Trocar With Bilateral Tissue Seperator , Laparoscopic Sterile & Disposable 12 Mm Bladeless Trocar With Bilateral Tissue Separator- Sleeve And Obturator Set , Laparoscopic Sterile & Disposable 12 Mm Sleeve Compatible For Above 12Mm Bladeless Trocar With Bilateral Tissue Seperator , Laparoscopic Sterile & Disposable Laparoscopic 12 Mm Blunt Tip Optical Trocar- Sleeve And Obturator Set , Laparoscopic Sterile & Disposable 12 Mm Sleeve Compatible For Above 12Mm Blunt Tip Optical Trocar , Laparoscopic Sterile & Disposable 11 Mm Smooth Cannula With Bladeless Optical Trocar With Bilateral Tissue Separator , Laparoscopic Sterile & Disposable 11 Mm Sleeve Compatible For Above 11Mm Bladeless Optical Trocar With Bilateral Tissue Seperator , Laparoscopic Sterile & Disposable 12 Mm Smooth Cannula With Bladeless Optical Trocar With Bilateral Tissue Separator , Laparoscopic Sterile & Disposable 12 Mm Sleeve Compatible For Above 12 Mm Bladeless Optical Trocar With Bilateral Tissue Separator , Disposable Laparoscopic Clip Applicator 5 Mm With 15 Preloaded Medium-Large Clips Available With Colour Code Indicator For Last Clip , Disposable Laparoscopic Clip Applicator 10 Mm With 20 Preloaded Medium-Large Clips Available With Colour Code Indicator For Last Clip , Disposable Laparoscopic Clip Applicator 12 Mm With 20 Preloaded Large Clips Available With Colour Code Indicator For Last Clip , Laparoscopic Linear Cutter Stapler, 60 Mm, With Articulating Shaft, 340 Mm Shaft Length, Capable Of Firing White,Blue,Gold,Green Reloads , 60Mm Reloads 1.5Mm- Blue Cartridge, Compatible With Above Articulating 60Mm Laparoscopic Linear Cutter Stapler , 60Mm Reloads 2.0Mm-Green Cartridge, Compatible With Above Articulating 60Mm Laparoscopic Linear Cutter Stapler , 60Mm Reloads 1.8Mm- Gold Cartridge, Compatible With Above Articulating 60Mm Laparoscopic Linear Cutter Stapler , 60Mm Reloads 1.0Mm- White Cartridge, Compatible With Above Articulating 60Mm Laparoscopic Linear Cutter Stapler , Laparoscopic Linear Cutter Stapler, 45Mm, With Articulating Shaft, 340 Mm Shaft Length, Capable Of Firing White,Blue,Gold,Green Reloads , 45Mm Reloads 2.0Mm-Green Cartridge, Compatible With Above Articulating 45Mm Laparoscopic Linear Cutter Stapler , 45Mm Reloads 2.0Mm-Blue Cartridge, Compatible With Above Articulating 45Mm Laparoscopic Linear Cutter Stapler , 45Mm Reloads 1.8Mm- Gold Cartridge, Compatible With Above Articulating 45Mm Laparoscopic Linear Cutter Stapler , 45Mm Reloads 1.0Mm- White Cartridge, Compatible With Above Articulating 45Mm Laparoscopic Linear Cutter Stapler , Specimen Retrieval Bag Pouch With 10Mm Diameter & 4*6 Inch Bag Size , Sterile Disposable Laparoscopic Camera Cover- 100 Inches , Absorbable Fixation Device (5 Mm) Loaded With 25 Absorbable Straps With Two Point Fixation Design Made Of Polydiaxanone, Glycolide And Lactide For Mesh Fixation In Laparoscopic Hernia , Absorbable Fixation System (5 Mm) Loaded With 15 Absorbable Tacks With Screw Designmade Of Poly Glycolide-Co-Llactide (Pgla) For Mesh Fixation In Laparoscopic Hernia , Flexible Composite Mesh With Tissue Barrier On Both Side (Visceral Side And Parietal Side) Made Of Polyglycoprone, Polydiaxanone, Polypropylene: Size: 15 X 20 Cm , Single Use Laparoscopic Absorbable Mesh Fixation Device With 20 Tacks , Polyester Composite Dual Layer Mesh With Resorbable Collagen Film For Ventral Hernia Repair With Prefixed Sutures, Size 15X10cm. , Polyester Composite Dual Layer Mesh With Resorbable Collagen Film For Ventral Hernia Repair With Prefixed Sutures, Size 20X15cm , Polyester Composite Dual Layer Mesh With Resorbable Collagen Film For Ventral Hernia Repair With Prefixed Sutures, Size 25X20cm. , Anatomical Polypropylene Mesh For Laparoscopic Inguinal Hernia Repair- Left Side-10X 15 Cm , Anatomical Polypropylene Mesh For Laparoscopic Inguinal Hernia Repair- Right Side-10X 15 Cm , 3 Dimensional Polypropylene Anatomical Mesh For Lap Inguinal Hernia With Medial Inferior Flap And Partially Sealed Edges Size 16X12 Left , 3 Dimensional Polypropylene Anatomical Mesh For Lap Inguinal Hernia With Medial Inferior Flap And Partially Sealed Edges Size 16X12 Right. , Circular Stapler 28Mm With Three Staggered Rows And Tri-Staple Technology Purple, Staple Height 3.0Mm, 3.5Mm, 4.0Mm , Circular Stapler 28Mm With Three Staggered Rows And Tri-Staple Technology Black, Staple Height 4.0Mm, 4.5Mm, 5.0Mm , Circular Stapler 31Mm With Three Staggered Rows And Tri-Staple Technology Purple, Staple Height 3.0Mm, 3.5Mm, 4.0Mm , Circular Stapler 31Mm With Three Staggered Rows And Tri-Staple Technology Black, Staple Height 4.0Mm, 4.5Mm, 5.0Mm , Open Anatomical Mesh Made Of Monofilament Polyester With Pla Absorbable Grip For Suture Less Self-Fixation Semi Absorbable Mesh For Open Ventral Hernia. Size 20X15cm , Open Anatomical Mesh Made Of Monofilament Polyester With Pla Absorbable Grip For Suture Less Self-Fixation Semi Absorbable Mesh For Open Ventral Hernia. Size 15X15cm , Open Anatomical Mesh Made Of Monofilament Polyester With Pla Absorbable Grip For Suture Less Self-Fixation Semi Absorbable Mesh For Open Inguinal Hernia. Size 12X08cm Right Side , Open Anatomical Mesh Made Of Monofilament Polyester With Pla Absorbable Grip For Suture Less Self-Fixation Semi Absorbable Mesh For Open Inguinal Hernia. Size 12X08cm Left Side , Newly Designed 3-D Patented Anatomical Monofilament Polypropylene Textile With Large Pore Size ( >1Mm ), Ml Marking, Upper Sealed Edge, Unsealed Inferior Edge & Inferior Flap. Size 15*10Cm Large Right. , Newly Designed 3-D Patented Anatomical Monofilament Polypropylene Textile With Large Pore Size ( >1Mm ), Ml Marking, Upper Sealed Edge, Unsealed Inferior Edge & Inferior Flap. Size 15*10Cm Large Left. , Alligator Grasper With 2.4Mm Shaft & 12.5Mm Jaw Aperture With Minigrip Handle-Disposable - Torcar Less Usage , Clutch Grasper With 2.4Mm Shaft & 12.5Mm Jaw Aperture With Minigrip Handle-Disposable - Torcar Less Usage , Tong Grasper With 2.4Mm Shaft & 12.5Mm Jaw Aperture With Minigrip Handle-Disposable- Torcar Less Usage , Babcock Grasper With 2.4Mm Shaft & 12.5Mm Jaw Aperture With Minigrip Handle-Disposable - Torcar Less Usage , Precutaneous Alligator Grasper With 2.3Mm Shaft & 12.5Mm Jaw Aperture-Disposable - Torcar Less Usage , Precutaneous Clutch Grasper With 2.3Mm Shaft & 12.5Mm Jaw Aperture-Disposable - Torcar Less Usage , Precutaneous Bowel Grasper With 2.3Mm Shaft & 12.5Mm Jaw Aperture-Disposable - Torcar Less Usage , Precutaneous Babcock Grasper With 2.3Mm Shaft & 12.5Mm Jaw Aperture-Disposable - Torcar Less Usage , Hook Monopolar Probe With 2.4Mm Shaft-Disposable - Torcar Less Usage , Curved Spatula Monopolar Probe With 2.4Mm Shaft-Disposable - Torcar Less Usage , Straight Spatula Monopolar Probe With 2.4Mm Shaft-Disposable - Torcar Less Usage , Conical Monopolar Probe With 2.4Mm Shaft-Disposable - Torcar Less Usage , Laparoscopic Fascial Closure System With 12Mm Optical Bladeless Trocar , Laparoscopic Fascial Closure System With 12Mm Bladed Trocar , Endo Gia Tri- Staple 2.0 Intelligent Reload 45Mm Purple Medium/Thickwith Tri- Staple Technology Having A Height Of 3.0Mm, 3.5Mm And 4.0Mm Capable Of Placing In Manual And Power Stapler , Endo Gia Tri- Staple 2.0 Intelligent Reload 60Mm Purple Medium/Thickwith Tri- Staple Technology Having A Height Of 3.0Mm, 3.5Mm And 4.0Mm Capable Of Placing In Manual And Power Stapler. , Endo Gia Tri- Staple 2.0 Intelligent Reload 45Mm Tan Vascular/Medium With Tri- Staple Technology Having A Height Of 2.0Mm, 2.5Mm And 3.0Mm Capable Of Placing In Manual And Power Stapler. , Endo Gia Tri- Staple 2.0 Intelligent Reload 60Mm Tan Vascular/Medium With Tri- Staple Technology Having A Height Of 2.0Mm, 2.5Mm And 3.0Mm Capable Of Placing In Manual And Power Stapler , Endo Gia Tri- Staple 2.0 Intelligent 45Mm Loading Unit For Tan And Purple Tri- Staple Reloads Capable Of Placing In Manual And Power Stapler. , Endo Gia Tri- Staple 2.0 Intelligent 60Mm Loading Unit For Tan And Purple Tri- Staple Reloads Capable Of Placing In Manual And Power Stapler. , Laparoscopic Ultrasonic 5Mm Curved Shear With 36Cm Shaft Length Compatable With Ultrasonic Generator System , Laparoscopic Ultrasonic 5Mm Curved Shear With 45Cm Bariatric Shaft Length Compatable With Ultrasonic Generator System , Laparoscopic Transducer( Hand Piece) Compatable With Ultrasonic Energy System Shears - Grey , Open Ultrasonic Curved Shear With 17Cm Shaft Length For Open Surgery And Compatable With Ultrasonic Generator System , Open Transducer * Hand Piece) Compatable With Ultrasonic Energy System Open Shears - Blue , Endoscopic Multiple Clip Applicator 5 Mm (The 5 Mm Endoscopic Multiple Clip Applier Is A Sterile, Single Patient Use Instrument Designed To Provide A Means Of Ligation Shaft Diameter 5.5 Mm Clip Size: Medium/ Large Shaft Length: 33 Mm Closed Clip Dimension: 8.8 Mm Open Clip Width: 3.6 Mm. The Instrument Contains 15 Titanium Clips, And The Shaft Can Be Rotated 360 Degrees In Either Direction. , Endoscopic Rotating Clip Applier 12 Mm With 20 Preloaded Titanium Clips - Medium/ Large Size (It Is Designed To Rated 360 Degree In Either Direction. The Rotating Knob Is Located To Allow For A One - Handed Technirue. Endoscopic Rotating Clip Applier 12 Mm With 20 Preloaded Titanium Clips - Medium Large Size. Overall Shaft Length: 28.9 Cm Closed Clip Length Dimension: 8.8 Mm Open Clip Width: 4.2 Mm , Endoscopic Rotating Clip Applier 12 Mm With 20 Preloaded Titanium Large Size (It Is Designed To Rated 360 Degree In Either Direction. The Rotating Knob Is Located To Allow For A One - Handed Technirue. Endoscopic Rotating Clip Applier 12 Mm With 20 Preloaded Titanium Clips - Large Size. Overall Shaft Length: 31.1 Cm Closed Clip Length Dimension: 11 Mm Open Clip Width: 5.2 Mm , Capsure - Tacker (Fixation) - 30 Tacks: Permanent Fixation Device Made Of 316L Stainless Steel Having Cannula Length Of 37 Cm With Smooth Polyetheretherketone (Peek) Cap To Eliminate Exposed Metal Tip And Help Minimize Adhesions To The Fastener And Also With Fastner Level Indicator With Metric , Ventralight Echo Ps Mesh 15.2 Cm Circle: Echo Ps™ Positioning System Is A Low Profile Balloon That Comes Pre-Attached With Uncoated Lightweight Monofilament Polypropylene Mesh With Hydrogel Barrier Made Of Bioresorbable Coating [Sodium Hyaluronate (Ha) + Carboxymethylcellulose (Cmc) + Polyethylene Glycol (Peg)] On Visceral Side And Coated By Bioresorbable Pga Fibres On Both Sides For Laparoscopic Ventral Hernia Repair. Circle Shaped. Size 15.2 Cm , Ventralight Echo Ps Mesh 20.3Cm Circle: Echo Ps™ Positioning System Is A Low Profile Balloon That Comes Pre-Attached With Uncoated Lightweight Monofilament Polypropylene Mesh With Hydrogel Barrier Made Of Bioresorbable Coating [Sodium Hyaluronate (Ha) + Carboxymethylcellulose (Cmc) + Polyethylene Glycol (Peg)] On Visceral Side And Coated By Bioresorbable Pga Fibres On Both Sides For Laparoscopic Ventral Hernia Repair. Circle Shaped. Size 20.3 Cm , Ventralight Echo Ps Mesh 15.2 X 20.3 Cm Elliptical : Echo Ps™ Positioning System Is A Low Profile Balloon That Comes Pre-Attached With Uncoated Lightweight Monofilament Polypropylene Mesh With Hydrogel Barrier Made Of Bioresorbable Coating [Sodium Hyaluronate (Ha) + Carboxymethylcellulose (Cmc) + Polyethylene Glycol (Peg)] On Visceral Side And Coated By Bioresorbable Pga Fibres On Both Sides For Laparoscopic Ventral Hernia Repair. Circle Shaped. Size 15.2 Cm X 20.3 Cm , Ventralight Echo Ps Mesh 20.3 Cm X 25.4 Cm Elliptical : Echo Ps™ Positioning System Is A Low Profile Balloon That Comes Pre-Attached With Uncoated Lightweight Monofilament Polypropylene Mesh With Hydrogel Barrier Made Of Bioresorbable Coating [Sodium Hyaluronate (Ha) + Carboxymethylcellulose (Cmc) + Polyethylene Glycol (Peg)] On Visceral Side And Coated By Bioresorbable Pga Fibres On Both Sides For Laparoscopic Ventral Hernia Repair. Circle Shaped. Size 20.3 Cm X 25.4 Cm , Disposable Laproscopic Bladeless Optical Trocar 11Mm*100Mm Compatible With 10Mm Telescope With Gas Port , Disposable Laproscopic Bladeless Optical Trocar 5Mm*100Mm Compatible With 5Mm Telescope With Gas Port , Disposable Laproscopic Bladeless Threaded Trocar 10/11*100Mm With Gas Port , Disposable Laproscopic Bladeless Threaded Trocar 12Mm*150Mm With Gas Port , Disposable Laproscopic Bladeless Threaded Trocar 5Mm*100Mm With Gas Port , Laparoscopic Sterile Disposable 5 Mm X 75 Mm Optical Advance Fixation With Self Retaining Trocar With Balloon Stabilizer , Laparoscopic Sterile Disposable 5 Mm X 100 Mm Optical Advance Fixation With Self Retaining Trocar With Balloon Stabilizer , Laparoscopic Sterile Disposable 10 12 Mm 100 120 Mm Optical Advance Fixation With Self Retaining Trocar With Balloon Stabilizer , Disposable Laproscopic Curved Maryland Dissector And Grasper 5Mmwith Unipolar Cautrey Shaft Length 35Cm Without Rachet , Laparoscopic Suction And Irrigation With Elctrode Hook, 5Mm, Disposable, Clear Ergonomic Handpiece, With Multiple Re-Usable Probe Attachment Option And Built In Smoke Evacuation , Disposable Laproscopic Atraumatic Grasper 5Mm Low Profile Double Action Jaw With Latis Pads Technology, Shaft Length 35Cm , Without Rachet , Disposable Laproscopic Coagulating And Dissecting Electrode With A Sliding Sheath And Built In Smoke Evacuation With A Button, L-Shaped With Connector Pin For Unipolar Cautery, And Integrated Suction And Irrigation System , Size 5Mm, Shaft Length 33-36Cm , Disposable Laproscopic Preloaded Multifiremedium Large Titanium Universal Clip Applier With Tigold Clip Technology. Offers 20 Clips With 34 Cm Shaft Length , Disposable Spring Loaded Veress Needle With Blunt Stylet With Red Indicator Button And 13 Gauze High Flow Needle, 12-15Cm Length Luer Lock , Vessel Sealing Device Consumables , Ligasure Maryland Jaw 5 Mm Laparoscopic Sealer / Divider 37Cm. , Ligasure Small Jaw Open Sealer / Divider 16.8 Mm Electrode Length, 18.8 Cm Instrument Length , Ligasure Impact Open Sealer / Divider Shaft Length 18Cm , Ligasure Maryland Jaw 5 Mm Laparoscopic Sealer / Divider 23Cm , Ultrasonic Energy Device Consumables , Gray Handpiece Compatible With Harmonic Laparoscopic Shears , Blue Handpiece Compatible With Harmonic Laparoscopic Shears , Ultrasonic Curved Shear For Open Surgeries – Shaft Length 9 Cmswith Adaptive Tissue Technology, Compatable With Harmonic Gen11 , Ultrasonic Curved Shear For Open Surgeries – Shaft Length 9 Cm, Compatible With Harmonic Gen11 , Laproscopic 5Mm Diameter Ultrasonic Tissue Sealer Of 35Cm Shaft Length With Articulating Straight Jaw , Ultrasonic Curved Shear For Open Surgeries – Shaft Length 17 Cm,Compatible With Harmonic Gen11 , Ultrasonic 5Mm Shaft Diameter Open Curved Shear, Shaft Length With Adaptive Tissue Technology And Non Sticky Blade – 23 Cm Compatable With Harmonic Gen11 , Ultrasonic 5Mm Shaft Diameter Open Curved Shear, Shaft Length 23Cm Compatible With Harmonic Gen11 , Ultrasonic 5Mm Shaft Diameter Laparoscopic Curved Shear, Shaft Length 36Cm With Adaptive Tissue Technology And Non Sticky Blade –Compatible With Harmonic Gen11 , Ultrasonic 5Mm Shaft Diameter Laparoscopic Curved Shear, Shaft Length – 36Cm Compatible With Harmonic Gen11 , Tissue Sealing Ultrasonic Probe For Open Surgeries With 40Mm Curved Jaw And 22 Cm Shaft,12Mm Shaft Diameter, Compatible With Harmonic Gen11 , Ultrasonic 5Mm Shaft Diameter Laparoscopic Curved Shear With Advanced Hemostasis Curved Shears 36Cm Length , Shaft Length With Adaptive Tissue Technology And Non Sticky Blade – 36Cm Compatable With Harmonic Gen11 , Ultrasonic Curved Blade For Laproscopic Surgery With 32Cm Shaft Length Compatible With Gen11 , Ultrasonic Hook Blade For Laproscopic Surgery With 32Cm Shaft Length Compatible With Gen11 , Ultrasonic Ball Coagulator For Laproscopic Surgery With 31Cm Shaft Length Compatible With Gen11 , Ultrasonic Hook Blade For Open Surgeries Compatable With Harmonic Gen11 , Ultrasonic Combination Of Hook And Blade For Open Surgeries Compatable With Harmonic Gen11 , Ultrasonic Curved Blade For Open Surgeries Compatable With Harmonic Gen11 , Laparoscopic 5 Mm Ultrasonic Curved Shear With An Integrated Transducer, Shaft Length 20Cm, Indicated For Dissection, Grasping, Coagulation, Cutting & Coagulation Up To & Including 7Mm Vessels, Minimal Thermal Injury & Utilizes Adaptive Tissue Technology”) , Ultrasonic 5Mm Shaft Diameter Laparoscopic Curved Shear With Advanced Hemostasis Curved Shears 23Cm Length , Shaft Length With Adaptive Tissue Technology And Non Sticky Blade – 23Cm Compatable With Harmonic Gen11 , Laparoscopic Automatic Suturing Device Consumables , Automatic Endoscopic/ Laparoscopic 10 Mm (Endostitch) Suturing Device- One Handed Instrument With Needle Position Indicator At The Handle-With Shaft Length 38 Cm , Single Use Loading Units (Sulu)- Single Stitch Unit- Absorbable Glycolide/ Lactide Suture 2-0 With 18 Cm Length, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device , Single Use Loading Units -Single Stitch Unit- Absorbable Glycolide/Lactide Suture 2-0 With 120 Cm Length, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device , Single Use Loading Units (Sulu)- Single Stitch Unit- Absorbable Glycolide/Lactide Suture 3-0 With 18 Cm Length, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device , Single Use Loading Units (Sulu’S)- Single Stitch Unit- Absorbable Glycolide/Lactide Suture 3-0 With 120 Cm Length, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device , Single Use Loading Units (Sulu’S)- Single Stitch Unit- Non-Absorbable Silk Suture 1-0 With 120 Cm Length, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device , Single Use Loading Units (Sulu’S)- Single Stitch Unit- Non-Absorbable Silk Suture 2-0 With 120 Cm Length, Compatible With The Above Automatic Endoscopic/ Laparoscopic 10 Mm Suturing Device , Single Incision Laparoscopic Set Consumables , Single Incision Laparoscopic Surgery Port System 12 Mm With Three 5 Mm Cannulas, One 5 Mm Obturator, One 5 Mm-12 Mm Cannula, One 12 Mm Obturator , Single Incision Laparoscopic Surgerysingle Use Articulating Grasperhand Instrument 36 Cm Shaft Length With Ratchet , Single Incision Laparoscopic Surgery Single Use Articulating Dissector With Monopolar Cauteryhand Instrument 36 Cm Shaft Length With Ratchet , Single Incision Laparoscopic Surgery Single Use Articulating Shear With Monopolarcautery36 Cm Shaft Length With Ratchet , Single Incision Laparoscopic Surgery Single Use Articulating Hook With Monopolar Cauterywith 36 Cm Shaft Length , Single Incision Laparoscopic Surgery- Single Use Articulating Automatic Suturing Device , Reloads For Single Incision Laparoscopic Surgery- Single Use Loading Units 3-0 Absorbable 8’’/20 Cmlength Compatible With The Above Single Incision Laparoscopic Surgery Automatic Suturing Device , Reloads For Single Incision Laparoscopic Surgery- Single Use Loading Units 2-0 Non- Absorbable 8’’/20 Cmlength Compatible With The Above Single Incision Laparoscopic Surgery Automatic Suturing Device , Rfa Consumables , Closure Fast Catheter 7F (Radiofrequency Ablation Catheter Size: 60 Cm , Closure Fast Catheter 7F (Radiofrequency Ablation Catheter Size: 100 Cm , Introducer Sheath 7F , Staplers Consumables , Linear Cutter60mm(Reusasable And Autoclavable) , Blue Relaod Compatible With Abovereusable Linear Cutter60 Mm With In Build New Knife Bladeand Adjustable Firing Knob , Greenrelaod Compatible With Abovereusable Linear Cutter60 Mm With In Build New Knife Bladeand Adjustable Firing Knob , Linear Cutter80mm(Reusasable And Autoclavable) , Blue Relaod Compatible With Abovereusable Linear Cutter80 Mm With In Build New Knife Bladeand Adjustable Firing Knob , Greenrelaod Compatible With Abovereusable Linear Cutter80 Mm With In Build New Knife Bladeand Adjustable Firing Knob , Stapler 3.5Mm, 25Mmfor Trans Oral Anvil Device , Trans Oral Anvil Device, 25Mm , Wound Protector Small Incision Size 2-6.6Cm , Wound Protector Medium Incision Size 5-9Cm , Wound Protectorlarge Incision Size 9-14Cm , Wound Protector And Retractor, Sizes- Extra Large , Wound Protector Retractor With Rigid Ring Size 11 Or 17 Cm , Gelport Hand Exchange System , Linear Cutter 100Mm , Reloads Blue For Linear Cutter 100Mm , Reloads Green For Linear Cutter 100Mm , 60Mm Disposable Linear Cutter Stapler With Dual Side Firing Feature, Anti Slip Body,Rear Hinge Locking For Intermediate Position, Push Button For Quick Opening And Interchangeable Blue & Green Reloads , 80Mm Disposable Linear Cutter Stapler With Dual Side Firing Feature, Anti Slip Body,Rear Hinge Locking For Intermediate Position, Push Button For Quick Opening And Interchangeable Blue & Green Reloads , 100Mm Disposable Linear Cutter Stapler With Dual Side Firing Feature, Anti Slip Body,Rear Hinge Locking For Intermediate Position, Push Button For Quick Opening And Interchangeable Blue & Green Reloads , 60Mm Disposable Blue Reload For Use With 60Mm Linear Cutter Stapler With Fresh Knife & Safety Lock, Available In Pet Blister Tray, Reload Should Have Open Leg Length Of 3.8Mm And Closed Staple Height Of 1.5Mm, Staple Length Of 64Mm & Cut Length Of 60Mm , 60Mm Disposable Green Reload For Use With 60Mm Linear Cutter Stapler With Fresh Knife & Safety Lock, Available In Pet Blister Tray, Reload Should Have Open Leg Length Of 4.8Mm And Closed Staple Height Of 2.0Mm, Staple Length Of 64Mm & Cut Length Of 60Mm , 80Mm Disposable Blue Reload For Use With 80Mm Linear Cutter Stapler With Fresh Knife & Safety Lock, Available In Pet Blister Tray, Reload Should Have Open Leg Length Of 3.8Mm And Closed Staple Height Of 1.5Mm, Staple Length Of 84Mm & Cut Length Of 80Mm , 80Mm Disposable Green Reload For Use With 80Mm Linear Cutter Stapler With Fresh Knife & Safety Lock, Available In Pet Blister Tray, Reload Should Have Open Leg Length Of 4.8Mm And Closed Staple Height Of 2.0Mm, Staple Length Of 84Mm & Cut Length Of 80Mm , 100Mm Disposable Blue Reload For Use With 100Mm Linear Cutter Stapler With Fresh Knife & Safety Lock, Available In Pet Blister Tray, Reload Should Have Open Leg Length Of 3.8Mm And Closed Staple Height Of 1.5Mm, Staple Length Of 104Mm & Cut Length Of 100Mm , 100Mm Disposable Green Reload For Use With 100Mm Linear Cutter Stapler With Fresh Knife & Safety Lock, Available In Pet Blister Tray, Reload Should Have Open Leg Length Of 4.8Mm And Closed Staple Height Of 2.0Mm, Staple Length Of 104Mm & Cut Length Of 100Mm , Stapler Laparoscopic Linear Cutter With Articulating Shaft,Capable Of Firing White, Blue, Green,Radial,Tristaple Reloads And Capable To Load 30,45 , 60 Mm , Reload 30Mm(Articulating) Tan Vascular/Medium Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 30Mm Curved Tip (Articulating) Tan Vascular/Medium Tristaplecompatible With Above Lap Linear Cutter Stapler , Reload 30Mm(Articulating) Purple Medium/Thick Tristaplecompatible With Above Lap Linear Cutter Stapler , Reload 45Mm(Articulating) Tan Vascular/Medium Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload, 45Mm(Articulating) Purple Medium/Thick Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 45Mm(Articulating) Black Extra Thick Tristaplecompatible With Above Lap Linear Cutter Stapler , Reinforced Reload, 45Mm(Articulating) Purple Medium/Thick Tristaple Compatible With Above Lap Linear Cutter Stapler , Reinforced Reload, 45Mm(Articulating) Blackextra Thick Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 45Mm Curved Tip(Articulating) Tan Vascular/Medium Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 45Mm Curved Tip(Articulating) Purple Medium/Thick Tristaplecompatible With Above Lap Linear Cutter Stapler , Reload 60 Mm(Articulating) Tan Vascular/Medium Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload, 60Mm (Articulating) Purple Medium/Thick Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 60Mm (Articulating) Black Extra Thick Tristaplecompatible With Above Lap Linear Cutter Stapler , Reinforced Reload, 60Mm(Articulating) Purple Medium/Thick Tristaple Compatible With Above Lap Linear Cutter Stapler , Reinforced Reload, 60Mm(Articulating) Blackextra Thick Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 60Mm Curved Tip(Articulating) Tan Vascular/Medium Tristaple Compatible With Above Lap Linear Cutter Stapler , Reload 60Mm Curved Tip(Articulating) Purple Medium/Thick Tristaplecompatible With Above Lap Linear Cutter Stapler , Reload 60Mm Radialpurple Medium/Thick,Three Row Stapling Each Side,Access To Deep Pelvis,Better Vision,Accesssbilitytristaple Reload Compatible With Above Lap Linear Cutter Stapler , Endoscopic Linear Cutter Short 065 , Endoscopic Linear Cutter Medium 160 , Endoscopic Linear Cutter Long 255 , Reload 45 Mm(Articulating) Purple Medium/Thick3 Varied Heights Staples On Either Side Of Cut Line To Reduce The Tissue Trauma With Optimal Compression , Reload 60 Mm(Articulating) White Vascular/Medium 3 Varied Heights Staples On Either Side Of Cut Line To Reduce The Tissue Trauma With Optimal Compression , Reload 60 Mm(Articulating) Purple Medium/Thick3 Varied Heights Staples On Either Side Of Cut Line To Reduce The Tissue Trauma With Optimal Compression , Reload 60 Mm(Articulating) Blackextra Thick3 Varied Heights Staples On Either Side Of Cut Line To Reduce The Tissue Trauma With Optimal Compression , Endoscopic Linear Cutter 60Mmarticulating Shaft 340Mm Powered By Battery & Gripping Surface Technology , Endoscopic Linear Cutter 60Mmarticulating Shaft 440Mm Powered By Battery & Gripping Surface Technology , 60Mm Reloads 2.3Mm-Thick Cartridge, Compatiblewith Above Articulating 60Mm Laparoscopic Linearcutter Stapler , 60Mm Reloads 1.5Mm With Griping Surface Tecnology- Blue Cartridge, Compatiblewith Above Articulating 60Mm Laparoscopic Linearcutter Stapler , 60Mm Reloads 2.0Mmwith Griping Surface Tecnology-Green Cartridge, Compatiblewith Above Articulating 60Mm Laparoscopic Linearcutter Stapler , 60Mm Reloads 1.8Mmwith Griping Surface Tecnology- Gold Cartridge, Compatiblewith Above Articulating 60Mm Laparoscopic Linearcutter Stapler , 60Mm Reloads 1.0Mmwith Griping Surface Tecnology- White Cartridge, Compatiblewith Above Articulating 60Mm Laparoscopic Linearcutter Stapler , 60Mm Reloads 2.3Mmwith Griping Surface Tecnology- Thick Cartridge, Compatiblewith Above Articulating 60Mm Laparoscopic Linearcutter Stapler , Endoscopic Linear Cutter 45Mmarticulating Shaft 340Mm Powered By Battery , Endoscopic Linear Cutter 45Mmarticulating Shaft 440Mm Powered By Battery , 45Mm Reloads 1.5Mm With Griping Surface Tecnology- Blue Cartridge, Compatiblewith Above Articulating 45Mm Laparoscopic Linearcutter Stapler , 45Mm Reloads 2.0Mmwith Griping Surface Tecnology-Green Cartridge, Compatiblewith Above Articulating 45Mm Laparoscopic Linearcutter Stapler , 45Mm Reloads 1.8Mmwith Griping Surface Tecnology- Gold Cartridge, Compatiblewith Above Articulating 45Mm Laparoscopic Linearcutter Stapler , 45Mm Reloads 1.0Mmwith Griping Surface Tecnology- White Cartridge, Compatiblewith Above Articulating 45Mm Laparoscopic Linearcutter Stapler , 45Mm Reloads 2.3Mmwith Griping Surface Tecnology- Thick Cartridge, Compatiblewith Above Articulating 45Mm Laparoscopic Linearcutter Stapler , Harmonic Consumables , Advanced Bipolar Probe With Ptc Techonogyround Tip- 14Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogyround Tip- 25Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Round Tip- 35Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Round Tip- 45Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy 3Mm Curved Round Tip -14 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy 3Mm Curved Round Tip- 25Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy 3Mm Curved Round Tip- 35Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy 3Mm Curved Round Tip- 45Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Super Jaw Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Straight Jaw 35Cm With Articulation Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Curved Jaw 35Cm With Articulation Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Straight Jaw 45Cm With Articulation Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Curved Jaw 45Cm With Articulation Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Straight 14 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Curved 14 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Straight 25 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Curved 25 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Straight 35 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Curved 35 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Straight 45 Cm Compatiable With Gen 11 , Advanced Bipolar Probe With Ptc Techonogy Tissue Sealer Curved 45 Cm Compatiable With Gen 11 , Laparoscopic 5 Mm Ultrasonic Curved Shear With An Integrated Transducer, Shaft Length 36Cm, Indicated For Dissection, Grasping, Coagulation, Cutting & Coagulation Up To & Including 7Mm Vessels, Minimal Thermal Injury & Utilizes Adaptive Tissue Technology”) , 20 Cm Shaft Length, 38Mm Jaw Length, 6Mm Jaw Width Advance Bipolar Electrosurgical Instrument Intended For Use In Open Procedures Capable Of Cutting & Coagulationoftissue Bundle &Vessels Up To And Including 7 Mm , Ultrasonic 5Mm, Laparoscopic Curved Blade Shaft Length 36Cm With Advanced Hemostasis (Seal Up To 7Mm Vessel ) Compatible With Gen11 , Thunderbeat Consumables , Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.28Cm Curved, Bl/Bl, Black , Tungsten Carbide Metzenbaum-Dissec.18Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissec.20Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissec.23Cm,Cvd., Black Coated , Tungsten Carbide Metzenbaum-Dissect.Scis.20Cm,Cvd. Titan Nitrite Coated-Copper , Sterilisation Consumables , Class Iv Indicator For Eto Sterilisation (Pack Control) To Make Sure That The Item Within The Pack Is Adequately Exposed And Sterilised With Eto , Class V Integrator For Steam Sterilisation (Pack Control) To Make Sure That The Item Within The Pack Is Adequately Exposed And Sterilised With Eto , Self Contained Vial With Spore Strip Of Resistant Bacteria For Checking Steam Sterilization , Self Contained Vial With Spore Strip Of Resistant Bacteria For Checking Eto Sterilization , Radio Opaque, Gauze, Unsterile, Size- 10 X 10 Cms, 16 Ply , Radio Opaque, Gauze, Unsterile, Size- 10 X 10 Cms, 16 Ply , Common Items - Consumables , Iv Extension Set 200 Cm , Micro Infusion Set , Iv Flow Regulator Extension Set , Dial Flow , Sterile Disposable Ventilator Circuit , Intercostal Drainage Set , Pigtail Catheter 14 & 16 , Incentive Spirometer , Bain Circuit , Ventilator Circuit With Humidifire , Oxygen Mask - Adult , Oxygen Mask With Nebulizer - Adult , Et Tube (Pvc) Cuffed - Murphyeyes (All Sizes) , Suction Catheters (All Sizes) , High Pressure Monitoring Lines (M-F) , High Pressure Monitoring Lines (M-M) , Threeway Stop Cock With Extn Lines , Ambu Bag (Adult) , Closed Ventilator Suction Catheters (All Sizes) , Cvp Catheter (Triple Lumen) , Laryngoscope Bulb , Guedels Airways (Pvc) - All Sizes , Nasal Prongs , Stillet , Ecg Pre Gel , Ecg Gelly , Echo Gel/Ultra Sound , Alfa Bed , Glucose Strips With Meter , Ventilator T Connector , Nrbm Mask , Expandable Catheter Mount With Bacterial Filter Hme For Ventilator , Sutures - Consumables , Polyester Braided Green, 75Cm In Length, ½ Circle Round Body Alloy Double Needle With 26Mm Needle Dimension (3-0) , Polyester Braided Green, 75Cm In Length, ½ Circle Round Body Alloy Double Needle With 26Mm Needle Dimension (2-0) , Polyester Braided White, 90Cm In Length, ½ Circle Round Body Alloy Double Needle With 26Mm Needle Dimension (2-0) , Polyester Braided Green, 90Cm In Length, Ski 22 Needle (2-0) , Triclosan/Pds, 45 Cm In Length, 22Mm Alloy Needle, Unidirectional, Prime Reverse Cutting Knotless Suture Control Device- Barbed Suture (3-0) , Triclosan /Pds , 45Cm In Length, 22Mm Alloy Needle, Unidirectional,Prime Reverse Cutting Knotless Suture Control Device- Barbed Suture(2-0) , Non-Absorbable Polybutester Knotless Wound Closer Device With Unidirectional &Dual Angle Cut Barbs Suture Geometry **1, 45Cm, Blue 37Mm 1/2 Circle Taper Point. , Non-Absorbable Polybutester Knotless Wound Closer Device With Unidirectional &Dual Angle Cut Barbs Suture Geometry **1-0, 45Cm, Blue 37Mm 1/2 Circle Taper Point. , Non-Absorbable Polybutester Knotless Wound Closer Device With Unidirectional &Dual Angle Cut Barbs Suture Geometry **1-0, 15Cm, Blue 37Mm 1/2 Circle Taper Point , Non-Absorbable Polybutester Knotless Wound Closer Device With Unidirectional &Dual Angle Cut Barbs Suture Geometry **2-0, 45Cm, Blue 37Mm 1/2 Circle Taper Point , 180 Days Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry **3-0 15Cm, Green 17Mm 1/2 Circle Taper Point. , 180 Days Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry **1-0 45Cm, Green 37Mm 1/2 Circle Taper Point. , 180 Days Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry **2-0 30Cm, Green 26Mm 1/2 Circle Taper Point. , 180 Days Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry **1-0 30Cm, Green 37Mm 1/2 Circle Taper Point. , 180 Days Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry **2-0 15Cm, Green 37Mm 1/2 Circle Taper Point , 180 Days Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry **1-0 15Cm, Green 37Mm 1/2 Circle Taper Point , Sterilisation Non-Consumables , Hair Clipping Machine That Can Be Sterilized Or Capable Of Using Sterile Disposable (Or Resterilisable) Blade Head. The System Should Be Chargeable And Usable Without Cord. Should Be Fda Approved. Handle Should Be Water Proof And Can Be Disinfected. Should Be Capable Of Atleast 40 Minutes Of Use After Charging. (Please Quote For 100 Clipper Heads Along With Machine). . , Patient Pre-Operative Skin Preparation Solution 26Ml In One Step Sterile Applicator Container For Single Use With 2% Chlorhexidine Gluconate (Chg) And 70% Isopropyl Alcohol (Ipa) With Orange Tint Colour For Easy Visualization. , Patient Pre-Operative Skin Preparation Solution 10.5Ml In One Step Sterile Applicator Container For Single Use With 2% Chlorhexidine Gluconate (Chg) And 70% Isopropyl Alcohol (Ipa) With Orange Tint Colour For Easy Visualization. , Ward/Icu Non - Consumables , Nibp Cuff For Adult , Digital B.P Apparatus With Adult Cuff , Nebuliser Machine Electronic , Stainless Steel Bowll 60X30mm , Reusable Surgical Skin Stapler Remover , Alpha Bed With Motor , Two Fold Backrest With Metal Fram Which Can Be Adjusted From A Low Lying Angle To An Upright Sitting Position , Bedside Screen (Three Panels) With Curtain Cloth-Overall Approx Dimension: 1680 Mm ( H) X 2450 Mm ( W) Mild Steel Erw Tubular Frame Work > Mounted On Six Synthetic Body Cators 50 Mm Wheel Dia, Without Brake. Three Panels. Middle Panel 1210 Mm Wide Two Side Panels 610 Mm Wide Each . Supplied With Hooks , Springs And Cloth Curtains. Pre- Treated And Powder Coated Finish , Adult Proctoscope Set With Handle 70Mm Effective Length X 22Mm Diameter , Proctoscope Paediatric Set With Handle 40Mm Effective Length X 12Mm Diameter , Ecg Cable 5 Leads Compatible With Bpl, Ocean, Riransa, Skanray , Spo2 Probe Adult Compatible With Bpl, Ocean, Riransa, Skanray , Finger Tip Spo2 Measuring Device , Niv Mask , Digital Thermometer , Bougie , Ot Non-Consumablesall Items Should Have The Specific Standards Mentioned-The Instrument Must Be Of International Standards Having International Standards Such As Ce, Fda, Bis Ordin. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument.Should Have Iso 13485 Certification For Surgical Equipments , Laproscopicpolymer Locking Ligation System(Like Hem-O-Lok) Applicator - Extra-Large, 12 1/2 (32 Cm) Applier, 10 Mm , Laproscopicpolymer Locking Ligation System(Like Hem-O-Lok) Applicator -Large, 12 1/2 (32 Cm) Applier, 10 Mm , Laproscopicpolymer Locking Ligation System(Like Hem-O-Lok) Applicator -Medium-Large, 12 3/4 (32.5 Cm) Applier, 5 Mm , Laprascopic Reusable And Autoclavable 10Mm Applier For Large Polymer Type Vasular Clip , Laproscopicpolymer Locking Ligation System(Like Hem-O-Lok)-12 1/2 (32 Cm), Take-Apart Remover, 5 Mm (For Ml And L) , Laparoscopic Vascular Bulldog Clip Applier Of Shaft Length 34 Cm With Diameter 12.5Mm Made Of Stainless Steel. , Laprascopic Reusable And Autoclavable 10Mm Applier For Medium-Large Polymer Type Vasular Clip , Artery Forceps Straight 6 Inch , Artery Forceps Curved 6 Inch , Gillies Toothed Dissecting Forceps 16 Cm , Bone Nibbler Double Action 8 , Right Angled Forceps 8 Inches Long With Short 5Mm Long Fine Tip Made Of High Quality Surgical Grade Stainless Steel , Right Angled Forceps 9 Inches Long With Short 5Mm Long Fine Tip Made Of High Quality Surgical Grade Stainless Steel , Right Angled Forceps 9 Inches Long With 15Mm Long Blunt Tip Made Of High Quality Surgical Grade Stainless Steel , Allis Tissue Forceps Box Joint 8 Of High Quality Surgical Grade Stainless Steel , Babcock Intestinal Forceps 8 Box Joint Of High Quality Surgical Grade Stainless Steel , Angled (20 To 30 Degree) Babcock Forceps 9 Inches Long Of High Quality Surgical Grade Stainless Steel , Adson Forceps 4.5Inch Long Non-Tooth Serrated Jaws Of High Quality Surgical Grade Stainless Steel , Adsons Forceps 4.5 Inch Long, 1X2 Teeth, 1.4Mm Tip Of High Quality Surgical Grade Stainless Steel , Adsons Forceps 4.5 Inch Long, Ring Tip Of High Quality Surgical Grade Stainless Steel , Stainless Steel Cheatles Forceps 10 And 1/2 Inches Long , Crawford Artery Forceps Curved Of Dimension 245 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Overholt- Geissendörfer Dissecting Forceps Of Dimension 225 Mm. The Instrument Must Be Of International Standarords Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Overholt- Geissendörfer Dissecting Forceps Of Dimension 280 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Waugh Tissue Forceps 1X2 Teeth Of Dimension 200 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 3.5Mm Wide Tip And Dimension Of 200 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 3.5Mm Wide Tip And Dimension Of 240 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 3.5Mm Wide Tip And Dimension Of 300 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 2Mm Wide Tip And Dimension Of 150 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 2Mm Wide Tip And Dimension Of 200 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 2Mm Wide Tip And Dimension Of 240 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , De Bakey Atraumatic Dissecting Forceps Of 2Mm Wide Tip And Dimension Of 300 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Debakey Atraumatic Forceps 150Mm Long, 1Mm Tip Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Debakey Atraumatic Forceps 195Mm Long, 1Mm Tip Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Debakey Atraumatic Forceps 240Mm Long, 1Mm Tip Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Angled Debakey Atraumatic Forceps With Tip At 30 Deg Angle 6 Long, 2Mm Tip Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Angled Debakey Atraumatic Forceps With Tip At 30 Deg Angle 8 Long, 2Mm Tip Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Straight, Light Weight, Tapered Tip Debakey Type Vascular Forceps With 1:2 Serrations Of Total Length 24 Cm, Tip Width Around 1Mm, With Rounded Blades For Hand Grip, With Counter Balance, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Cooley Non-Traumatic Vascular Clamp Angled 45 Degree With 4 Cm Long Jaws 5 Inches Long Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Cooley Non-Traumatic Vascular Clamp Angled 60 Degree With 4 Cm Long Jaws 5 Inches Long Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Cooley Non-Traumatic Vascular Clamp Angled 90 Degree With 4 Cm Long Jaws 5 Inches Long Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Angled, Atraumatic Vascular Occlusion Clamp With Inner Jaw Of Debakey Type(1:2 Serrations), With An Angle Of 60 Degrees, Working Length Of Clamp Of Minimum 6.5Cm And Total Length Of 18 Cm, With Ring Handle And Ratchet, With Non-Reflecting Surface With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Straight, Atraumatic Vascular Occlusion Clamp With Inner Jaw Of Debakey Type(1:2 Serrations), With An Angle Of 60 Degrees, Working Length Of Clamp Of Minimum 6.5Cm And Total Length Of 18 Cm, With Ring Handle And Ratchet, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Satinsky Type Tangential Occlusion Clamps With Inner Jaw Of Debakey Type(1:2 Serrations), With Wide Angle U Shaped Occlusion Area, With44 Mm Distance Between Tip Of The Instrument And Starting Of The Working Length Respectively. Should Have Ring Handle 9 Inches Long With Ratchet, Should Be Made Of High Quality Stainless Steel, Should Be Non-Reflecting. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Satinsky Type Tangential Occlusion Clamps With Inner Jaw Of Debakey Type(1:2 Serrations), With Wide Angle U Shaped Occlusion Area, With 50 Mm Distance Between Tip Of The Instrument And Starting Of The Working Length Respectively. Should Have Ring Handle 9 Inches Long With Ratchet, Should Be Made Of High Quality Stainless Steel, Should Be Non-Reflecting The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Satinsky Type Tangential Occlusion Clamps With Inner Jaw Of Debakey Type(1:2 Serrations), With Wide Angle U Shaped Occlusion Area, With63 Mm Distance Between Tip Of The Instrument And Starting Of The Working Length Respectively. Should Have Ring Handle 9 Inches Long With Ratchet, Should Be Made Of High Quality Stainless Steel, Should Be Non-Reflecting. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Satinsky (Baby) Tangential Occlusion Clamps With Inner Jaw Of Debakey Type(1:2 Serrations), With Wide Angle U Shaped Occlusion Area, With44 Mm Distance Between Tip Of The Instrument And Starting Of The Working Length Respectively. Should Have Ring Handle 9 Inches Long With Ratchet, Should Be Made Of High Quality Stainless Steel, Should Be Non-Reflecting.The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Satinsky (Baby) Tangential Occlusion Clamps With Inner Jaw Of Debakey Type(1:2 Serrations), With Wide Angle U Shaped Occlusion Area, With50 Mm Distance Between Tip Of The Instrument And Starting Of The Working Length Respectively.Should Have Ring Handle 6 Inches Long With Ratchet, Should Be Made Of High Quality Stainless Steel, Should Be Non-Reflecting.The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Satinsky (Baby) Tangential Occlusion Clamps With Inner Jaw Of Debakey Type(1:2 Serrations), With Wide Angle U Shaped Occlusion Area, With63 Mm Distance Between Tip Of The Instrument And Starting Of The Working Length Respectively.Should Have Ring Handle 9 Inches Long With Ratchet, Should Be Made Of High Quality Stainless Steel, Should Be Non-Reflecting.The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Curved Smooth Jaw Vascular Clamp With A Longitudinal Groove In The Jaw 13 Cm Long 5.5 Cm Working Length. Should Be Made Of High Quality Stainless Steel, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Company’S Name, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Cross Action Bull Dog Vascular Clamp 8.5 Cm Long With 3 Cm Working Length Of Jaws, Jaw Width Of 2 To 3 Mm. Should Be Made Of High Quality Stainless Steel, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Company’S Name, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Cross Action Bull Dog Vascular Clamp With Straight Jaw Of Length Of 3 Cm, Jaw Width Of 2 To 3 Mm, Debakey Type Inner Jaw, Total Length Of 6 Cm. Should Be Made Of High Quality Stainless Steel, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Cross Action Bull Dog Vascular Clamp With Smoothly Curved Jaw Of Length Of 3 Cm, Jaw Width Of 2 To 3 Mm, Debakey Type Inner Jaw, Total Length Of 6 Cm. Should Be Made Of High Quality Stainless Steel, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Micro Bulldog Vascular Clamp With Straight Jaw Of Length 14 Mm, Debakey Type Inner Jaw, Total Length Of 5Cm, Approximate Occlusion Pressure Of 180Gm, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Atraumatic Micro Bulldog Vascular Clamp With Curved Jaw Of Length 14 Mm, Debakey Type Inner Jaw, Total Length Of 5Cm, Approximate Occlusion Pressure Of 180Gm, With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Straight Needle Holder Made Up Of High Quality Stainless Steel, With Tungsten Carbide Coated Slender Jaws, Should Hold Needles Of 5 ‘O’ To 7 ‘O’ Sutures With Good Grip, Jaw Length 1.5 Cm, Total Length 18Cm, With Ring Handle, With Ratchets With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Straight Needle Holder Made Up Of High Quality Stainless Steel, With Tungsten Carbide Coated Slender Jaws, Should Hold Needles Of 5 ‘O’ To 7 ‘O’ Sutures With Good Grip, Jaw Length 1.5 Cm, Total Length 23Cm, With Ring Handle, With Ratchets With Non-Reflecting Surface. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Mini Ryder Needle Holder With Tungsten Carbide (Tc) Jaws 15 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Mini Ryder Needle Holder With Tungsten Carbide (Tc) Jaws 18 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Mini Ryder Needle Holder With Tungsten Carbide (Tc) Jaws 20 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Mini Ryder Needle Holder With Tungsten Carbide (Tc) Jaws 23 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Ryder Slim Needle Holder With Tungsten Carbide (Tc) Jaws 15 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Ryder Slim Needle Holder With Tungsten Carbide (Tc) Jaws 18 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Ryder Slim Needle Holder With Tungsten Carbide (Tc) Jaws 20 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Ryder Slim Needle Holder With Tungsten Carbide (Tc) Jaws 23 Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Hegar- Mayo- Stille Tungsten Carbide Needle Holder Of Dimension 200 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Tungsten Carbide Needle Holder Of Very Delicate Build Recommended For Suture Material 6/0 - 10/0 Of Dimension 230 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Crile-Wood Tungsten Carbide Needle Holder Recommended For Suture Material 4/0 - 6/0 Of Dimension 305 Mm. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Potts Smith Scissors 45 Deg Angle 9 Long Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instruments Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument , Potts Smith Scissors 9 Bent On Flat At 90 Deg Angle Of High Quality Surgical Grade Stainless Steel With Non-Reflecting Surface. The Instruments Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument , Delicate Dissecting Scissors 20.5 Cm Metzenbaum-Fine Stainless Steel Slender Pattern, S-Shaped. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Deaver Retractor, 2” Wide, 7” Working Length, 13” Long Of High Quality Surgical Grade Stainless Steel , Czerny Retractor Made Of High Quality Surgical Grade Stainless Steel , Cushing’Svein Retractor Made Of Stainless Steel Of Size 20 Cm, 10 Mm Blade , Cushing’Svein Retractor Made Of Stainless Steel Of Size 20 Cm, 12 Mm Blade , Cushing’Svein Retractor Made Of Stainless Steel Of Size 24 Cm, 10 Mm Blade , Cushing’Svein Retractor Made Of Stainless Steel Of Size24 Cm, 12 Mm Blade , B.P Handle No. 7 Made Of High Quality Surgical Grade Stainless Steel , Balfour Self Retaining Retractor (Abdominal): Made Of High Quality Surgical Stainless Steel For Use In Abdominal Surgery As A Self Retaining Retractor With Lateral Blades Of Depth 60Mm And Central Blade Vertical Type Of Depth 75 X 50 Mm , Balfour Self Retaining Retractor (Abdominal): Made Of High Quality Surgical Stainless Steel For Use In Abdominal Surgery As A Self Retaining Retractor With Lateral Blades Of Depth 100Mm And Central Blade Vertical Type Of Depth 70 X 110 Mm , Retractors Harrington Made Of Surgical Grade Stainless Steel , Blood And Fluid Warmer, Pole Mountable, 3 L Capacity, Alarms With Safety Features With Mounting Hardware , Metzenbaum Scissor Curved 10 Inches Long Made Of High Quality Surgical Grade Stainless Steel , Deaver Retractor- 5 Cm Width X 30.5 Cm Long Blade Made Of High Quality Surgical Grade Stainless Steel , Deaver Retractor- 7.5Cm Widthx 37 Cm Long Blade Made Of High Quality Surgical Grade Stainless Steel The Instrument Must Be Of International Standards Having International Standards Such As Fda, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Balfour Transplant Retractor- Adult Size 2X2 Sharp Prongs, Blades 7Cm, Overall Length Of Arms 20 Cm , 17 Cm Spread Made Of High Quality Surgical Grade Stainless Steel The Instrument Must Be Of International Standards Having International Standards Such As Fda, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Debakey Vascular Forceps- Straight 2Mm Tip, 30.5 Cm Length Made Of High Quality Surgical Grade Stainless Steel The Instrument Must Be Of International Standards Having International Standards Such As Fda, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Debakey Vascular Forceps- - Angled 2 Mm Tip, 19.5 Cm Length Made Of High Quality Surgical Grade Stainless Steel The Instrument Must Be Of International Standards Having International Standards Such As Fda, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Debakey Vascular Forceps- - Angled 2 Mm Tip, 24 Cm Length Made Of High Quality Surgical Grade Stainless Steel The Instrument Must Be Of International Standards Having International Standards Such As Fda, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Gerald Debakey Tissue Forceps- Angled 17.5 Cm Length, 2Mm Tip Made Of High Quality Surgical Grade Stainless Steel The Instrument Must Be Of International Standards Having International Standards Such As Fda, Bis And Din. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Reusablecapacitive-Couplingreturn Electrodewhich Does Not Directly Conduct Hence Providing Highest Level Of Safety To The Patient By Completely Eliminating Pad Site Burns To Suit All Adult Patients, Made Of Akton Polymer . Usfda Approved , St. Mark`S Deep Pelvic Retractors 9 Inch With Lip And 15°Angle And Doyens Handle - , St. Mark`S Deep Pelvic Retractors 7 Inch With Lip And 15° Angle With Doyens Handle , St. Mark`S Deep Pelvic Retractors 7 Inch Straight Retractor With Doyens Handle , Reusable Stainless Steel Suction Hemorrhoid Ligator With 500 Bands , Overholt Dissecting And Ligature Forceps - With A Length Of 20.5Cm , Overholt-Miotti Dissecting And Ligature Forceps - With A Length Of 23 Cm , Hasson Retractor S Shaped - Malleable -10 Mm Wide , Hasson Retractor S Shaped - Malleable -13Mm Wide , Hasson Retractor S Shaped - Rigid-10 Mm Wide , Hasson Retractor S Shaped - Rigid-13 Mm Wide , Overholt-Geissendoerfer Dissecting And Ligature Forceps - With A Length Of 27 Cm , Taylor Cushing Delicate Dissecting Forceps With A Length Of 17.5 Cm And Tungsten Carbide Coated 4Mm Tip , Potts Smith Dissecting Forceps With A Length Of 21Cm And Tungsten Carbide Coated 4Mm Tip , Potts Smith Dissecting Forceps With A Length Of 26Cm And Tungsten Carbide Coated 4Mm Tip , Poole Suction Reusable - 25Cm In Length , Hegar-Mayo Needle Holder, 150Mm, 6, Tungsten Carbide Tip , Ssg Handle Humbys With Downs Blade , Gigli Saw Holder , Hegar-Mayo Needle Holder,, 8, Tungsten Carbide Tip , Hegar-Mayo Needle Holder, 10, Tungsten Carbide Tip , Reynolds-Jameson Vessels Scissors Curved 140 Mm , Diethrich Vessel Scissors 175Mm , Nelson Metzenbaun Dissecting Scissors Curved 260Mm , Microscissors With Round Handle Curved 145Mm , Fine Dissection Forceps 145 Mm , Mc Indoe Delicate Forceps 150 Mm , Debakey Angled Forceps 150 Mm , Ryder Needle Holder 125 Mm , Castroviejo Needle Holder145mm , Konig Vessel Retractor 180Mm , Davidson Scapula Retractor 195Mm, 75X 90Mm , Allison Lung Retractor 320Mm , John Hopkins Bulldog Clamp Curved 76Mm, 89Mm , Debakey Harken Venacava Clamp 245Mm , Finochietto Rib Spreader Medium 65X45mm Spread 210Mm , Ferguson Suction Canula With Finger Cut Off And Stylet, Thump Piece 90 Degree To Curve With Luer Hub, 160 Mm , Atraumatic Bulldog Clamp For Arteries35mm , Debakey Micro Forceps 150 Mm , Debakey Vena Cava Clamp Jaw 65Mm, 205Mm , Hegar-Mayo Needle Holder, 12, Tungsten Carbide Tip , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 20 Cm - Medium Size - Curved Jaw , Polymer Clipmedium Size - Compatible With Above Clip Applicator , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 20 Cm - Large Size - Curved Jaw , Polymer Cliplargesize - Compatible With Above Clip Applicator , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 20 Cm - Mediumlarge Size - Curved Jaw , Polymer Clip Mediumlargesize - Compatible With Above Clip Applicator , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Medium Size - Curved Jaw , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Large Size - Curved Jaw , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Extra Large Size - Curved Jaw , Polymer Clip Extralargesize - Compatible With Above Clip Applicator , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Mediumlarge Size - Curved Jaw , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Medium Size - 70 Degree Angledjaw , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Large Size - 70 Degree Angled Jaw , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Extra Large Size -70 Degree Angled Jaw , Reusable Polymer Clip Applicator( Like Hem - O- Lok)For Open Surgery - 27 Cm - Mediumlarge Size - 70 Degree Angled Jaw , Clip Remover For The Above Polymer Clip Applicator - Medium , Clip Remover For The Above Polymer Clip Applicator - Medium Large , Clip Remover For The Above Polymer Clip Applicator - Large , Clip Remover For The Above Polymer Clip Applicator - Extra Large , Reusable Multipatient Single Clip Applier For Small Size Clips, With Shaft Length 7 1/2 Inches , Small Titanium Alloy Clip Reloads Compatiblewith Reusable Multipatient Single Clip Applier For Small Size Clips, With Shaft Length 7 1/2 Inches , Reusable Multipatient Single Clip Applier For Medium Size Clips, With Shaft Length 7 1/2 Inches , Reusable Multipatient Single Clip Applier For Medium Size Clips, With Shaft Length 7 1/2 Inches With Right Angled Jaw , Medium Size Titanium Alloy Clip Reloads Compatiblewith Above Reusable Multipatient Single Clip Applier For Medium Size Clips, With Shaft Length 7 1/2 Inches & 7 1/2 Inches With Right Angled Jaw , Reusable Multipatient Single Clip Applier For Medium-Large Size Clips, With Shaft Length 7 1/2 Inches , Reusable Multipatient Single Clip Applier For Medium-Large Size Clips, With Shaft Length 10 1/2 Inches With Right Angled Jaw , Medium-Large Size Titanium Alloy Clip Reloads Compatiblewith Above Reusable Multipatient Single Clip Applier For Medium-Large Size Clips, With Shaft Length 7 1/2 Inches & 10 1/2 Inches With Right Angled Jaw , Reusable Multipatient Single Clip Applier For Large Size Clips, With Shaft Length 7 1/2 Inches , Reusable Multipatient Single Clip Applier For Large Size Clips, With Shaft Length 10 1/2 Inches , Reusable Multipatient Single Clip Applier For Large Size Clips, With Shaft Length 10 1/2 Inches Angled Jaw , Reusable Multipatient Single Clip Applier For Large Size Clips, With Shaft Length 10 1/2 Inches Right Angled Jaw , Large Size Titanium Alloy Clip Reloads Compatiblewith Reusable Multipatient Single Clip Applier. , Halsted Mosquito Curved Artery Forceps 5 , Lacrimal Probe Set 13 Cm , Forceps Jar 10 X 20 Cm , Langenbeck Abdominal Broad Retractor - Blade (W X D) 16 X 43 Mm, Length 222 Mm , Higgs Retractor 15Mm X 50Mm , Laparoscopic Stainless Steel Suture Passer , Digital Pneumatic Tourniquet With Microprocessor Control , Co2 Conversion Kit With German Index Pin , Lithotomy Clamps , Spencerwell Curved Artery 6 (150Mm) , Spencerwell Curved Artery 5 (130Mm) , Allis Forceps 6 (5X6 Teeth) 155Mm , Mayo Needle Holder 7 180Mm , Lanes Tissue Holding Forceps 7 180Mm , Babcocks Forceps 6 1/4 170Mm , Babcocks Forceps 8 200Mm , Roberts Forceps Canadian 8 Curved , Spencerwell Straight Artery 6 150Mm , Spencerwell Straight Artery 5 130Mm , Kellys Forceps Curved Box Jt. 8 200Mm , Paediatric Intestinal Clamp Straight. 6 , Paediatric Intestinal Clamp Curved. 6 , B.P Handle No.4 , B.P Handle No.3 , B.P Handle No.7 , Heiss Artery 7 (180Mm) , Heiss Artery 8 (200Mm) , Hibbs Laminectomy Retractor S/E 20Cm X 13Mm , Langenbeck Retractor S/E 22Mm X 6Mm , S-Shaped Retractors For Hasson Cannulas, 3/8? Width , Medzenbaum Curved Scissor 7 , Medzenbaum Curved Scissor 6 , Medzenbaum Curced Scissor 8 , Medzenbaum Straight Scissor 7 , Medzenbaum Straight Scissor 6 , Medzenbaum Straight Scissor 8 , Mcindole Fine Toothed Dissecting Forceps 6 , Mcindole Fine Toothed Dissecting Forceps 7 , Debakeys Non Toothed Forceps 8 , Debakeys Non Toothed Forceps 7 , Nibp Cuff With Velcro Compatible With Monitors In Icu. (Adult Size) , Catspaw Retractror 6.5 Inch Sharp Tip. , Czerny Retractor Blunt Tip Six Inch , Langenbecks Retractorx-Large, 25Mmx100mm , Supercut Scissors 6 Inch 20 Mm Curved , Mastoid Retractor (Wound Spreader), Curved Arms, 4X4 Blunt Prongs, 8 , Mastectomy Skin Hooks Double- 2 Mm Wide - 16 Cm , Landon Retractor -100 Mm * 25 Mm , Laparoscopic Insuflator Gas Tube Reusable. Compatible With 5Mm, 10Mm, 12Mm Sleeve , Laparoscopic Combined Suction And Irrigation Tubing Set Compatible With 5Mm And 10Mm Suction Irrigation Cannula , Light Source Cable Compatible With Olympus Laparascopic Light Source System , Laparoscopic Gas Insufflator Convension Kit , Littlewood Tissue Forceps, Reusable, Staight, Stainless Steel, 31 Cm Length , Ligature Of Catgut, Preformed Loop, Sterile(Endo-Loop) , Radio Opaque, Gauze, Unsterile, Size-10 X 10 Cms, 16 Ply , Interno External Biliary Drainage Catheter 8Fr , Pancreatic Duct Stent 4F, 18 Cm Long , Laparoscopic Dissector Gold Finger Dissector , Laparoscopic Overholt 60 Deg, Dissecting Forceps, 10Mm, 31Cm , Laparoscopic Overholt 90 Deg, Dissecting Forceps, 10Mm, 31Cm , Retractor, Laparoscopic Fan Shaped10 Mm Blade , Castro Viejo Round Body 21 Cm With Lock Micro Needle Holder , Bougie Device, 36 - 38 Fr Diameter, 90-100 Cm Length, Reusable, With Suction Connection, Luer Valve, Made Of Thermoplastic Polyurethane , Totally Implanted Chemoport Device With Distally Valved 8 Fr Catheter Power Injectable Port Chamber With Implantable Bumps For Easy Access, Micro Introducer Kit With J Tip Guide Wire Along With Malleable Metal Tunneler And Vein Pick. , Surgeons Shoes (With Anti Slippage Technology) : Pair, Washable, With Side Holes, Comfortable To Wear ( Three Sizes, Preferably Blue Or Green Colour) . Should Not Be Rubber Or Plastic But Be Made Of Closed Cell Resin Material Which Should Have Antibacterial Properties And Odor Free. The Top Should Be Of Strenghthened Material To Prevent Injuries Due To Falling Sharp Instruments. 1 Pair In Each Pack , Laparoscopic Non-Consumablesall Items Should Have The Specific Standards Mentioned-The Instrument Must Be Of International Standards Having International Standards Such As Ce, Fda, Bis Ordin. The Manufacturer’S Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument.Should Have Iso 13485 Certification For Surgical Equipments , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 12Mm Smooth With Stopcock, 11Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 12Mm With Stopcock, 11 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 12Mm Smooth Withoutstopcock, 11Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 12Mm Withoutstopcock, 11 Cm Long - Modular Construction And Color Coded , Sealing Unit Compatible With The Above 12 Mm Trocar , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10 Mm Smooth With Stopcock, 11Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10 Mm With Stopcock, 11 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10Mm Smooth Withoutstopcock, 11Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10Mm Threaded Withoutstopcock, 11 Cm Long - Modular Construction And Color Coded , Sealing Unit Compatible With The Above 10 Mm Trocar , Sealing Unit Compatible With The Above 12/10 Mm Trocar With 5Mm Converter , Sealing Unit Compatible With The Above 5 Mm Trocar , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Smooth With Stopcock, 11Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm With Stopcock, 11 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Smooth Withoutstopcock, 11Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Threaded Withoutstopcock, 11 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 12Mm Withoutstopcock, 15 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10 Mm Smooth With Stopcock, 15 Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10 Mm With Stopcock, 15 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10Mm Smooth Withoutstopcock, 15 Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 10Mm Withoutstopcock, 15 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Smooth With Stopcock, 15Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Threaded With Stopcock, 15 Cm Long - Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Smooth Withoutstopcock, 15 Cm Long- Modular Construction And Color Coded , Trocar Reusable Complete (Including Cannula, Obturator And Trocar Body) 5 Mm Threaded Withoutstopcock, 15 Cm Long - Modular Construction And Color Coded , Reducing Sleeve For 10 Mm Compatible With The Above Trocar With 5Mm Guide , Reducing Sleeve For 12 Mm Compatible With The Above Trocar With10 Mm And5mm Guide , Port/ Fascial Closure Grasping Forceps- Grasper Type , Laparoscopic Retraction Grasper With Two Teeth And Long Jaw , Suction Irrigation Shaft , Laparoscopic 5Mm Straight Reusable Self Righting Needle Holder With Ratchet Mechanism With Tungsten Plated Jaws For Enhanced Needle Grip, 30 Cm Metal Shaft , Articulating Applicator For Temoraray Bulldog Endoscopic Vascular Clip 12.5 Mm With 34 Cm Length , Atraumatic Temporary Bulldog Endovascular Clips 45 Mm Curved Compatible With Above Clip Applicator , Atraumatic Temporary Bulldog Endovascular Clips 45 Mm Straight Compatible With Above Clip Applicator , Laparoscopic Achalasia Scissors- Designed For Division Of Muscle Without Injuring The Mucosa In Laparoscopic Heller’S Cardiomyotomy , Laparoscopic Debakey Grasper With 50 Mm Jaw Length Curved , Laparoscopic Debakey Grasper With 50Mm Jaw Length Straight , Laparoscopic Esophageal/ Gastric Dissector With Long Jaw , Laparoscopic Dorsey Intestinal Forceps With 40 Mm Jaw , Laparoscopic Glassman Clamping Forceps With 60Mm Jaw , Laparoscopic Satinsky Atraumatic Clamp 51 Mm Jaw , Laparoscopic Satinsky Atraumatic Clamp 38 Mm Jaw , Laparoscopic Atraumatic Fenestrated Bowel Clamp , Laparoscopic Right Angle Forceps 5 Mm , Laparoscopic Bowel Holding Forceps 5 Mm- With Long Jaw , Laparoscopic Oslen’Scholangiogram Forceps –Clamp 5 Mm- For Cbd Exploration , Laparoscopic 5Mm Puncture Needle With Irrigation Shaft Length 32 Nos Cm , 5Mm Laparoscopic Articulating Liver Retractor- Medium , 5Mm Laparoscopic Articulating Liver Retractor- Medium Large , 5Mm Laparoscopic Articulating Liver Retractor- Larger , 5Mm Laparoscopic Trocar Reducer For 10Mm Cannula-50Mm , 5Mm Laparoscopic Trocar Reducer For 10Mm Cannula-30Mm , 3Mm Reducer For Laparoscopic Trocar Port , Hydatid Trocar With Cannula System For Laparoscopic Hydatid Sugery , Laparoscopic Combined Electrosurgical And Irrigation System To Facilitate Tissue Dissection, Coagulation, Irrigation And Fluid Evacuation Through A Common Trocar Sleeve With Interchangeable Shafts And Handles. Compatible With Commonly Used Irrigation And Suction Devices And Monopolar Electrosurgery Units- Hand Controlled- Pistol Grip Handle , 10 Mm Pool/Sump Suction/Irrigation Cannula With Shaft Length 34 Cm, Compatible With Above Laparoscopic Combined Electrosurgical And Irrigation System Unit , 5 Mm Hollow Tip-Hook Electrode, Compatible With Above Laparoscopic Combined Electrosurgical And Irrigation System , Laprascopic Reusable Knot Pusher 5Mm , Laprascopic Reusable Scissor 5Mm With Curved Jaw , Laprascopic Reusable Hook Type Scissor 5Mm , Hemorrhoidal Multi-Band Ligator With Triview , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-1X1cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-1X4cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-1X8cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-2X2cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-5X5x1cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-5X5cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-8X5cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-8X8cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-3.5X3.5Cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-10X10cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-7.6X50cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-7.6X100cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-7.6X150cm , Protonated Bioadhesive Technology (Pbt) In Sponge/Pad Made Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size-7.6X150cm , Advance Wound Dressing With Bioactive Microfiber Gelling Technology, Non-Woven Highly Absorbent, Haemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size:5X10cm , Advance Wound Dressing With Bioactive Microfiber Gelling Technology, Non-Woven Highly Absorbent, Haemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size:5X10cm , Advance Wound Dressing With Bioactive Microfiber Gelling Technology, Non-Woven Highly Absorbent, Haemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size:5X10cm , Advance Wound Dressing With Bioactive Microfiber Gelling Technology, Non-Woven Highly Absorbent, Haemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size:5X10cm , Advance Wound Dressing With Bioactive Microfiber Gelling Technology, Non-Woven Highly Absorbent, Haemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size:20X30cm , Advance Wound Dressing With Bioactive Microfiber Gelling Technology, Non-Woven Highly Absorbent, Haemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized & Moisture Proof Packing. Pack Size:45X45cm , Surgical 9X15cm Size Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver& Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce , Iso & Fda Approved , Surgical 9X25cm Size Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver& Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce , Iso & Fda Approved , Surgical 9X30cm Size Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver& Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce , Iso & Fda Approved , An Alcohol-Free Liquid Barrier Film Containing Acrylate Terpolymer, Polyphenylmethylsiloxane, Hexamethyldisoloxane And Isooctane Which Dries Quickly To Form A Breathable, Transparent, Hypoallergenic, Non-Cytotoxic Coating To Protect Damaged Or Intact Skin From Friction, Moisture, Shear, Bodily Fluids, Incontinence And Adhesive Trauma. Proven To Protect From Iad For 72 Hours, Size : 1Ml Wipe , Peripheral Iv Line Kit Consisting Of 1 Pc Of Advanced Iv Dressing 1683 Size 7Cm X 6.5 Cm ( Transparent, Semipermeable, Breathable, Water Proof, Bacterial And Viral Barrier, Synthetic Blood Penetration Resistance,Sterile, Polyurethane Film Reinforced With Soft Cloth Border And Notch Non-Latex, Hypoallergenic Pattern Coated Acrylic Adhesive, Lt Has A Picture Frame Delivery System And Complies With Iso-10993 Standards For Biocompatility). 1Pc Of Latex Free Disposable Tourniquet And An Alcohol-Free Liquid Barrier Film Containing 1Ml Wipe For Acrylate Terpolymer And Plasticizer Form A Breathable, Transparent Coating To Protect Damaged Or Intact Skin. , Laparoscopic Universal Grasping Forceps Fenestrated 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Babcop Grasping Forceps, Double Action 10Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Pott’S Scissors 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Dolphin Nose Dissecting Forceps 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Atraumatic Dissecting Forceps Fine Tip 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Dissecting Forceps Slim 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Overholt 90 Degree 10Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Croce/Olmi Dissecting Forceps Fenestrated 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Debakey Atraumatic Forceps Jaw Length 40Mm, 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Monopolar Electrodes With Handle And Inner Tube With L, J Hook, Ball And Spatula Electrode Tip 5Mm, 34Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Suction/ Irrigation With Monopolar Electrodes With Handle And Inner Tube With L And J Hook Electrode With Valve 5Mm, 33Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Metzenbaum Scissors Insulated To The Tip 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Micro Forceps Forceps 5Mm, 31Cm Long Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Articulating Bulldog Clip Applier/ Remover For The Above Clips, 12.5Mm Diameter And Shaft Length Of 35Mm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Duro Grip Tungston Carbide Needle Holder Straight With 5Mm Diameter And Shaft Length Of 31Cm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Duro Grip Tungston Carbide Needle Holder Straight With 5Mm Diameter And Shaft Length Of 37Cm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Duro Grip Tungston Carbide Curved To The Left Needle Holder With 5Mm Diameter And Shaft Length Of 31Cm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Duro Grip Tungston Carbide Curved To The Left Needle Holder With 5Mm Diameter And Shaft Length Of 37Cm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Reusable Atraumatic Clip Applicator With 500-550 G Closing Force Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Single Use Sterile Silicone Ring With Needle And The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Articulating Clip Applier/Remover 12.5 Mm Clip Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument , Laparoscopic Suction/ Irrigation Tube With Trumpet Valve, 10Mm Diameter With Shaft Length Of 40 Cm ( 2 Numbers) Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Anvil Grasper, 10 Mm Diameter With Shaft Length Of 37Cm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Laparoscopic Smooth Hassan Trocar Sleeve With Stop Cock , Obturator, Stability Cone For Trocar Sleeve , 12Mm With Sealing Unit For 10/12Mm Trocars With 5Mm Flap Cover Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument , Storage System For Laparoscopy Instruments Standard For Instruments With Shaft Length Upto 37 Cm, Compromising Of Storage Rack Standard Dimension Of 500*250*160Mm, Perforated Tray And Silicone Mesh Mat With Container Body External Dimension 600*280*190Mm And Lid For The 600*290*40Mm , Laparoscopic Vein Retractor 5Mm Diameter With Shaft Length Of 37Cm Made Up Of High Quality Stainless Steel. The Instrument Must Be Of International Standards Having At Least One Of The International Standards Such As Ce, Bis And Din. The Manufacturers Name Or Brand, Catalogue Number And Certification Details Should Be Engraved On The Instrument. , Gelport Laparoscopy System With Gel Seal Technology And Gel Seal Cap, Wound Protector/ Retractor And Sterile Lubricant , Endo Gia Intelligent Reload 30Mm White Vascular Curved Tip 8Mm Reload Capable Of Placing It In Manual And Powered Stapler. , Endo Gia Intelligent Reload 45Mm White Vascular Curved Tip 8Mm Reload Capable Of Placing It In Manual And Powered Stapler
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 50
Puducherry View Result →
24.
Defence #9416178 AOC
Tender For Provision Of Oh Tanks Ug Sumps And External Services For Map Ph-Ii Under Ge S Pune And Ge N Pune.; 1 SCH A PART-I TO VII:Note: These schedules are pre-priced by MES and the rate indicated as Rs 0.00 under Col 6 signifies this fact only 2 Total amount of Sch ‘A’ Part I (Building & Structure) 3 Total amount of Sch ‘A’ Part II (Internal Water supply) 4 Total amount of Sch ‘A’ Part III (Internal Electric Supply) 5 Total amount of Sch A Part-IV (Sewage Disposal) 6 Total amount of Sch A Part-V (External Water Supply) 7 Total amount of Sch A Part-VI (External Electric Supply) 8 Total amount of Sch A Part-VII ( LIGHTNING PROTECTION ) 9 Total amount of Sch A Part-VIII (Excavation and Earthwork) 10 SCHEDULE A PART-IX (MISC B/R ANDE/M WORKS)Note: This schedule is not pre-priced by MES and the rate indicated as Rs 0.00 under Col 6 signifies this fact only. 11 MISC ITEMS E/M WORKS OF INTERNAL & EXTERNALELECTRICAL SUPPLY 12 S&FLEDstreet light luminaire 25 W with pressure die castaluminium housing LED street light luminaries with IP66 with 25 W high power LED, maintenance free system and connecting up with cable, including 1.5 m long GI bracket of required dia, bent to shape, clamp and nut bolts of suitabler size complete all as specified and all as directed. 13 S&F solar powered aviation obstructionlamp complete sysytem make: Altos model AOL-Q-3 SP or equivalent model in philips / Crompton Greaves / bajaj consisting of : (a)LED based avitation obstruction lamp fitting (b) solar panel (c)Battery unit (d) Mounting structure for all above with inter connecting wiring complete all as specified and ditected. 14 Testing and commissioningtransformer copper wound step down, out door type, complete with all standard fitting of capacity 100 KVA, AC 3 phase, 3 wire primary, 4 wire secondary, 50 C/S type HT-22 KV, 3 PH, LT-433 Vand making compete connection of HT and LT Sidewith glands, lugs complete all as specified and directed.(Note- Transformer already installed /mounted on platform at site , before commisioning contractor will carried out Acidity Test,Sludge test, Insulation resistance Test,Break down voltage test of Oil.If test result not meet as per IS standard,contractor will carried out servicing of transformer at site In case of Sphare is out of order andreplacement requiredSphare part of transformer paid sapareatluy under relevent Item. 15 All as per item No- 11.003above but capacity22 KV 200 KVA. 16 Installation, testing and commissioningtransformer copper wound step down, out door type, complete with all standard fitting of capacity 300 KVA, AC 3 phase, 3 wire primary, 4 wire secondary, 50 C/S type HT-22 KV,LT-433 V and making connection on HT & LT side with gland and lugs , The transformer will mount on platform as per manufacturer instruction 0r Typical drawing or of size of size 2.00 M x 2.00 M x 3.50 M deep (1.00 m below GL) withPCC (1:3:6) type C2 and15 cm thick RCC (1:2:4) type B1 for top, reinforced with 10 mm dia TMT bars @ 150 mm C/C complete including excavation & earthwork in any type of strata viz soft/loose/hard/dense/Rock, frame work all as specified and directed(Note- Transformer shall be issued under Sch B free for fixing , before commisioning contractor will carried out Acidity Test,Sludge test, Insulation resistance Test,Break down voltage test of Oil.If test result not meet as per IS standard,contractor will carried out servicing of transformer at site In case of Sphare is out of order andreplacement requiredSphare part of transformer paid sapareatluy under relevent Item.The rate quoted by the contractor shall deemed to be included the cost offoundationa and transportation of transformer from MES yard to work site.No extra payment shall be made on this account.) 17 All as per item No- 11.005above but capacity 11 KV100 KVA. 18 All as per item No- 11.005 above but capacity 22 KV 400 KVA. 19 Servicing of existing LT electrical distribution/control panel of any size and capacity including cleaning of dust and debris, tightening of all connections, checking of contactors/relays, testing of insulation resistance, repair/replacement of defective control wiring (upto 1.5 sqmm copper) and faulty indicators (LED type), Testing and replacement of defective control MCBs upto 63A andensuring full operational status. Complete in all respects as per standard practice and directed by engineer-in-charge 20 Supply, jointing and testing outdoor cable end termination joint (heat shrinkable) suitable for 3 core 185 sqmm 22 KV XLPE cable suitable for earth system complete all as specified and directed. 21 Supply & fix heat shrinkable straight through joint 22 KV XLPE cable suitable for earth system of size 185 sqmm 3 core complete all as specified and directed. 22 M&L Earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge or the plate at a depth of not less than 1.5 m below ground level, connected to and including galvanised eath strip 32 mm x 6 mm by means of bolts,nuts and check nuts and washers of galvanised steel. Gl pipe 40 mm dia light grade pipe for protection of G.l. earth strip both to be provided to the extent of 7.5 meters as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per elctrical plate No. 3 of SSR Part 1·2009 including PCC chamber made up of PCC 1:3 :6 type C1 & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 6 mm round MS bar & 8 mm MS bar for handle , 20 mm dia medium grade G.I. Watering pipe from top edge of the earth plate upto M.S funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of soil and testing complete all as specified and directed. 23 Installation testing and commissioning of OUTDOOR TYPE ENCLOSURE, Double door, with angle iron pedastal frame & including steel structure required for installation on cable trench housing cubicle Type, free standing Panel CPRI approved working on 440 V 3 phase 50 Hz, AC supply with aluminium bus bar suitable for 800 Amps fully compartmentalized, dust-proof and vermin proof, 3.15 mm thick CRCA sheet steel enclosure painted asper the 7-tank process & suitable for IP-56 protection, as per section and having the following details and as shown in single line diagrams GE/1668/901:(a) Volt meter 0 – 500 Volt with selector switch – 01 (b) Ammeter 0.1000 Amps with CTs and selector switch – 01. (c) Indication Lamp assembly – RYB LED – 01 set.Incomer : 630 A 4 pole, ACB-02 Nos. Bus coupler : 630 A 4 Pole, ACB -01 No. Outgoing feeders :3 Pole, 315 A MCCB, 50 KA -05 Nos, 4 Pole, 250 A MCCB,35 KA-03, 3 Pole, 200 A MCCB, 35 KA -02Nos, 4 Pole, 100 A MCCB, 25 KA-01 Nos. Panel fabrication & Bus bar for above feeders. (Note- LT Panel with components as above shall be issued under Sch B free for fixing ) 24 Installation, testing & commissioning of OUTDOOR TYPE ENCLOSURE, Double door, with angle iron pedastal frame & including steel structure required for installationon cable trench housing cubicle type, free standing, panel CPRI approved 3 phase, 50 Hz, AC supply with aluminium bus bars, fully compartmentalized, dust-proof and vermin proof, 3.15 mm thick CRCA sheet steel enclosure painted as per the 7-tank process & suitable for IP-56 protection, as per specifications and having the following details and as shown in single line diagrams GE/1968/901 : (Note- LT Panel with components as above shall be issued under Sch B free for fixing )Incomer:160A, 4 pole 25 KA, MCCB with S/C adjustable, O/L & E/F thermal magnetic releases - 01 eachOutgoing Feeders:160A, TP, 25 KA, 415 VoltMCCB withS/C & adj. O/L& E/F thermal magnetic releases - 05 Nos25 KVAR APFC Compartment80A, TPN, 25KA - 1 No, MCCB with fixed neutral and S/C & adj. O/L thermal magnetic release 01 Each8 Stage APFC Relay16A, TPN, 25KA, MCCB with fixed neutral and S/C & adj. O/L thermal magnetic releases (for 5 KVAR Capacitor) 01 Each32A, TP, 25KA, MCCB with fixed neutral and S/C & adj. O/L thermal magnetic releases (for 10 KVAR Capacitor) - 02 NosCapacitor MD - XL 25 Installation testing and commissioning diesel engine/driven generating set of capacity 30 KVA (24 KW) 415 volts 0.8 power tractor at NTP, mounted on base platform with flexible coupling, 1500 RPM alongwith sound proof enclosure (Acoustic Enclosure) designed for reducing the sound level to 7+5 to B(A) (average) IS8528 part - 10 as per approved CPCB norms and as per GSR 371 (E) dated 17.05.2002 with silencer pipe and silencer muffler covered with asbestos rope 25 mm thick independently supported from engine to outside of power house upto 1 mtr, cold start kit, battery start with suitable size of standard dabbles for connecting from DG Set to panel board DG set shall be capable with and including the following:(A) PRIME MOVER: Diesel engine of suitable capacity water cooled (Radiator mounted) closed circuit as per BS-649 or IS-1002 direct injection type with turbo charger. Make: Cummins India Ltd/Kirloskar. The diesel engine shall be capable of running 24 hour continuously with 10% over loading for one hour in every 12 house as per BS 5514/- BS 649/- Engine shall be equipped with all standard fittings as per manufactures recommendations mounted on common base plate/form through flexible coupling with following accessories :(Note- DG Setwith components as above shall be issued under Sch B free for fixing ) (a) RPM cum hour meter(b) Battery Charging Ammeter(c) Ignition key and starting with push buttons(d) Lubricating oil pressure gauge(e) Electronic governor controlling 26 (f) Toggles switch for idle running(g) Oil Tem gauge (h) Water temp gauge(j) Safety control (Trip)(i) High water temperature(ii) Low Lubricant oil pressure(iii) Over speed(k) 24 hours starting equipment comprising with the following:(i) 1 No. 12 volt 180 AH batteries, Make: Exide type 25xnN21 or equivalent as recommended by manufacturer.(ii) Battery charging alternator with built in regulator.(iii) Starter motor assy of suitable capacity.(iv) Battery leads (copper stranded cable) of suitable size with brass thimbles and erminal Make of engine : Kirloskar/Cummings(B) ALTERNATOR: Alternator of capacity 30 KVA/24 KW at NTP, 415 volts, 50 C/S, 1500 RPM, 0.8 power factor, self excited, self regulated, screen protected with self excited field brush rotating fixed designed to be coupled with above engine through flexible coupling. the alternator shall be conformed to 4722 of BS-2613 MAKE: Kirloskar C) CONTROL PANEL : Alternator control panel floor mounted, cubical type with internal wiring with copper conductor for 30 KVA, 415 volts, 3 Phase 4 wire, 50 cycle alternator fabricated out of MS Sheet painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer equipped with the following accessories: 27 (i) AC voltmeter with selector switch 0-500V 01 No.(ii) Ammeter with CT and selector switch of suitable range 01 No(iii) Frequency meter - 01 No.(iv) KW and KWH meter - 01 No.(v) Power factor meter - 01 No(vi) MCCB (for incoming) as recommended by manufacturer - 01 No(vii) Set of copper bus bar of suitable size 01 No.(viii) Set of indicating lamps for 3 phase (RYB) 01 No(ix) Oil Pressure gauge 01 No(D) OTHER FITTINGS: (i) Battery Charger : Battery charger having electric circuit consisting of rectifiers, capacitors and resistance etc. The battery charger should be able to charge 12 volts 180 AH battery 2 Nos at a time(ii) Fuel tank of suitable capacity as per manufacturer recommendation mounted on steel frame at suitable height with all connecting pipes and fittings upto fuel pump and over flow pipe from engine to tank including level indicating gauge duly marked and drain valve and air vent plug etc. (E) Maintenance Spares:(i) Fuel filter element - 02 Nos(ii) Oil filter elements - 03 Nos(iii) Fan Belt - 01 Set(iv) Hose pipe - 01 Set(v) Tappet over gasket - 01 No(F) DG set shall be supplied along with acoustic original enclosure of the manufacture’s suitable for 30 KVA DG Set per CPCB Norms 28 Installation testing and Commissioning of INDOOR TYPE ENCLOSURE with angle iron pedestal frame & including steel structure required for installation on cable trench housing cubicle type, free standing, panel CPRI Approved working on 440 V, 3 Phase50 Hz, AC supply with aluminium bus bars, fully compartmentalized, dust-proof and vermin proof, 2 mm thick CRCA sheet steel enclosure painted as per the 7-tank process & suitable for IP-56 protection, as per section and having the following details and as shown in single line diagrams Ge/1968/905 (Note- LT Panel with components as above shall be issued under Sch B free for fixing )INCOMERFP pole MCCB 250 Amps 35 KA – 02 NosOut Going feeders:TPN pole 16A MCCB, 25 KA – 02 NosTPN pole 20A MCCB, 25 KA – 02 NosTPN pole 63A MCCB, 25 KA – 02 NosTPN pole 100A MCCB, 25 KA – 02 NosTPN pole 125A MCCB, 30 KA – 02 Nos3 KVAR capacitor duty contractor – 02 Nos5 KVAR capacitor duty contractor -02 Nos20 KVAR capacitor duty contractor -02 Nos30 KVAR capacitor duty contractor -02 Nos40 KVAR capacitor duty contractor -02 Nos8 stage APFC relay – 02Nos 29 Installation testing and commissioning diesel engine/driven generating set of capacity 160 KVA (128 KW) 415 volts 0.8 power tractor at NTP, mounted on base platform with flexible coupling, 1500 RPM alongwith sound proof enclosure (Acoustic Enclosure) designed for reducing the sound level to 7+5 to B(A) (average) IS8528 part - 10 as per approved CPCB norms and as per GSR 371 (E) dated 17.05.2002 with silencer pipe and silencer muffler covered with asbestos rope 25 mm thick independently supported from engine to outside of power house upto 1 mtr, cold start kit, battery start with suitable size of standard dabbles for connecting from DG Set to panel board DG set shall be capable with and including the following:(A) PRIME MOVER: Diesel engine of suitable capacity water cooled (Radiator mounted) closed circuit as per BS-649 or IS-1002 direct injection type with turbo charger. Make: Cummins India Ltd/Kirloskar. The diesel engine shall be capable of running 24 hour continuously with 10% over loading for one hour in every 12 house as per BS 5514/- BS 649/- Engine shall be equipped with all standard fittings as per manufactures recommendations mounted on common base plate/form through flexible coupling with following accessories : (Note- DG Set with components as above shall be issued under Sch B free for fixing ) complete all as specified and directed.(a) RPM cum hour meter(b) Battery Charging Ammeter(c) Ignition key and starting with push buttons(d) Lubricating oil pressure gauge(e) Electronic governor controlling(f) Toggles switch for idle running 30 (g) Oil Tem gauge (h) Water temp gauge(j) Safety control (Trip)(i) High water temperature(ii) Low Lubricant oil pressure(iii) Over speed(k) 24 hours starting equipment comprising with the following:(i) 1 No. 12 volt 180 AH batteries, Make: Exide type 25xnN21 or equivalent as recommended by manufacturer.(ii) Battery charging alternator with built in regulator.(iii) Starter motor assy of suitable capacity.(iv) Battery leads (copper stranded cable) of suitable size with brass thimbles and erminal Make of engine : Kirloskar/Cummings(B) ALTERNATOR: Alternator of capacity 160 KVA/128 KW at NTP, 415 volts, 50 C/S, 1500 RPM, 0.8 power factor, self excited, self regulated, screen protected with self excited field brush rotating fixed designed to be coupled with above engine through flexible coupling. the alternator shall be conformed to 4722 of BS-2613 C) CONTROL PANEL : Alternator control panel floor mounted, cubical type with internal wiring with copper conductor for 160 KVA, 415 volts, 3 Phase 4 wire, 50 cycle alternator fabricated out of MS Sheet painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer equipped with the following accessories: 31 (i) AC voltmeter with selector switch 0-500V 01 No.(ii) Ammeter with CT and selector switch of suitable range 01 No(iii) Frequency meter - 01 No.(iv) KW and KWH meter - 01 No.(v) Power factor meter - 01 No(vi) MCCB (for incoming) as recommended by manufacturer - 01 No(vii) Set of copper bus bar of suitable size 01 No.(viii) Set of indicating lamps for 3 phase (RYB) 01 No(ix) Oil Pressure gauge 01 No(D) OTHER FITTINGS:(i) Battery Charger : Battery charger having electric circuit consisting of rectifiers, capacitors and resistance etc. The battery charger should be able to charge 12 volts 180 AH battery 2 Nos at a time(ii) Fuel tank of suitable capacity as per manufacturer recommendation mounted on steel frame at suitable height with all connecting pipes and fittings upto fuel pump and over flow pipe from engine to tank including level indicating gauge duly marked and drain valve and air vent plug etc.(E) Maintenance Spares:(i) Fuel filter element - 02 Nos(ii) Oil filter elements - 03 Nos(iii) Fan Belt - 01 Set(iv) Hose pipe - 01 Set(v) Tappet over gasket - 01 No(F) DG set shall be supplied along with acoustic original enclosure of the manufacture’s suitable for 160 KVA DG Set per CPCB Norms 32 Installationtesting & commissioning of indoor cubic type, free standing floor mounted including of steel structure required for installation on cable trench with base frame, AMF panel CPRI approved on 440 V 3 phase 50 HZ, AC supply. It shall be extendible at both ends, with aluminium bus bars 200 amps capacity fully compartmentalized dust-proof and vermin proof, 2 mm thick CRCA sheet steel enclosure painted as per the 7-tank procress & suitable for IP-52 protection, as per section and having the following details and as shown in single line diagrams GE/1968/094 , complete all as specified and directed.( Note - AMF panel with components shall be issued under Sch B free for fixing ).Incomer100A 4 pole, 25 KA motorized MCCB – 01 NoOutgoingTPN 63 A MCCB, 25 KA – 02 NoTPN 32 A MCCB, 25 KA, 32 A MCCB, 25 KA – 2 NoPanel Fabrication & Busbar for above feeder 33 Installationtesting & commissioningof cubic type, free standing floor mounted weather proof type, pedestal mounted feeder pillar working on 440 V 3 phase 50 Hz, AC supply., It shall be with alum.bus bar 300 amps capacity weather proof dust proof with canopy on top 3.15 mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor weather proof IP-55 protection installation, as per specification and having the following details and as shown in single line diagrams GE/1968/903 complete all as specified and directed.(Note- LT Panel with components as above shall be issued under Sch B free for fixing )IncomerFP 315 A MCCB,50 KA- 01 NoOutgoingTPN 63A MCCB, 25 KA – 08 NosPanel Fabrication & Busbar for above feeder 34 Installationtesting & commissioningof cubic type, free standing floor mounted weather proof type, pedestal mounted feeder pillar working on 440 V 3 phase 50 Hz, AC supply., It shall be with alum.bus bar 300 amps capacity weather proof dust proof with canopy on top 3.15 mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor weather proof IP-55 protection installation, as per specification and having the following details and as shown in single line diagrams GE/1968/903 complete all as specified and directed.(Note- LT Panel with components as above shall be issued under Sch B free for fixing )IncomerFP 250 A MCCB,35 KA- 01 NoOutgoingTPN 63A MCCB, 35 KA – 08 NosPanel Fabrication & Busbar for above feeder 35 Supply, Install, testing, and commissioning of outdoor type, enclosure double door with angle iron pedestal frame & including steel structure required for installation on cable trenches, housing cubical type free standing,panel working on 440 volts, 3 phase 50 hz, AC supply with aluminium bus bar,full compartmentalised dust proof and vermin proof 3.15 thcik CRCA sheets steel enclosure, painted as per the 7-tank process & suitable as per IP-56 protection as per specification and having the following details and as shown in single line diagrams GE/1968/901 (Panel for 3 Alexander Road) complete all as specified and directed.a)MCCB 160 amps 4 pole, 25 KAbreaking capacity with short circuit adjustable overload& earth fault thermal magnetic release-8 Nos, CTs, ammeter with selector switch, voltmeterwith selector switch(Incomer)-01 Nos Bus bars: 250 A TPN aluminium Busbars suitable for 25kA for 1 Sec Outgoing Feeders :a) MCB TP 40 Amps 25 KA breaking capacity with short circuit adj overload and B/F thermal magnetic releaseb) Suitable enclose IE panel fabrication and bus bars for above MCB feeders. c) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legsand made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.d) M & L for necessary grouting as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job 36 Supply, installation, testing and commissioning of readymade 08 way TPN DB metal doorwith 200A rated busbar with following (CAT Part NoDBTPN008DDS of L& T or equivalent in Siemens/Legrand/C&S)Incomer: (a) MCB 4 Pole 60 Amps, 415 Volts breaking capacity 10kA 02 Nos (BB30630C of L &T)Outgoing feeders:(a) MCB TP 25 Amps, 415 Volts breaking capacity 10kA 04 Nos (BB30250C of L &T)(b)MCB SP 10 Amps, 230 Volts breaking capacity 10KA 04 Nos (BB10100C of L &T) 37 Supply, installation, testing and commissioning of outdoor line up of 11 KV RMU type compact panels, consisting of following :-11 KV 630 Amps 20KA for 3 sec. air/gas insulated RMU panel with 1 No incommingmanullay operated VCB and 02 Nos outgoing load break switches,CTs for protection as per detils given in specification complete in all respect inverse time over, current, short circuit & earth fault with instantaneous elements relay.Indication : ON, Off, Trip, R.Y.B. with facility for transformer buchholz relay trip with terminals for 230V AC supply aluminium Busbars 630 Amps, 11KV, TP busbars for 20 KA for 1 sec with PCC foundation all as per required & as per manufacturer instructions. complete all as specified and directed. 38 Supply, installation, testing and commissioning of 11KV 50/5 Amps ratio oil immersed vacume impragnated single phase current transformer with VA burden of 15 for class 0.5 class SP 10 with 25 KA short circuit rating for 1 second complete with all structure base and mounting arrangement as indicated and also as per specification and technical particulars. 39 Supply,Installation , testing and commissioning of outdoor line-up of 22 KV RMU type compact panels, consisting of : 22 KV 630A, 20KA for3 sec Air/Gas insulated RMU panel with 1 No Incomer & 2 Nos outgoing: 22 kV, 16 kA for 1 second, 630A HT VCB with 3 nos. resin cast 22000V/ sqrt. 3/ 110V/ sqrt. 3 withdraw-able PTs, HT and LT fuses ffor PTs, In comer 3 nos 50/1A & in outgoing 9 Nos. 20/1A CTs-core-1: class 0.5 CTs for metering, Core 2 : class 5 P10 for protection, inverse time over current, short circuit & each fault with intantenous elements relay, master trip, R.Y.B spring charge, trip circuit healthy. ON-OFF Push buttons illumination lamp, hooter, industrial socket with switch, space heater with thermostat, control MCB & control terminals etc complete all as specified and directed. 40 Laying only in trenches or fixing on wall or pole LT XLPE UG cable insulated screened PVC beded GI steel strip or wire armoured electric power cable (Heavy duty) with standard aluminium conductor 1100 volt grade of the follwing size including provision of necessyar lugs and glands as under : (Note- LT under ground cablementioned below at sl No (a) to (i) shall be issued under Sch Bfor laying/fixing ) 41 a) 300 sqmm 3.5 core 42 b) 240 Sqmm 3.5 core 43 c) 185 sqmm 3.5 core 44 d) 150 Sqmm 3.5 core 45 e) 120 Sqmm 3.5 Core 46 f) 50 Sqmm 3.5 Core 47 g) 35 Sqmm 3.5 core 48 h) 25 Sqmm 4 core 49 i)16 Sqmm 4 core 50 Supply and fixing and installation of fire extinguisher CO2 Map cap of 4.5 Kg as per IS 2878 Complete all as specified andas directed. 51 MS fire bucket 13 Ltr Cap of fire approved quality painted red filled with sand Complete all as specified andas directed. 52 Supply only hand gloves for safety,suitable for 22 KV grade. Complete all as specified andas directed. 53 Supply only hand gloves for safety,suitable for 11 KV grade. Complete all as specified andas directed. 54 MS padestal stand duly painted for suspending fire buckets 55 M&Lfor shock treatment chart in different languages (english, Hindi, Marathi) 56 Supply and placing of first aid box as per specification 57 Cable route marker made of galvanised iron supporting with GI angle for HT/LT cable root marking 58 M&L for Road cuttingby core cutting machine not less than 0.6 mtr wide and .45 mtr depthfor laying RCC and GI Pipe for the the HT/LT cable and making good surface with PCC 1:4:8 type D-2 using 40 mm graded stone aggergatecomplete all as specified and directed. 59 Supply and erect steel tubular poles swaged welded poles complete for two pole structure with MS base plate, MS pole cap, bolts nuts, and screws as per IS 2723 ( part II ) 1980 made out MS tyubing duly painted with metal primer and two coats of aluminium paint over exposed surface and Making 4 Nos of strips of 30 cm wide in alternate black and yellow colourup to 1.5 mtr hight, Writing pole number and voltage level encompassed by circle of suitable diausing two coats of synthetic enamel paint over a coat of red oxide zinc chrome primerbottomand one coat of red oxide and two coats of bituminous paint for embedded portion as specified type 410 SP - 31 of 9 mtrs long complete all as specified and as directed. ( Note- Excavation / earth work , PCC will be measured and paid separately ) 60 S&F FRP box,MCB SP 6 Amp-01 No and clamps made out of FI 32x6mm and GI nut bolts. Complete all as specified andas directed. make-syntex Model GSJB-3020 with 4 connectors or eqvt 61 S&Ftimer switch box fabricatedout of 16 SWG CRCA sheet with mounting arrangement duly powder coated consisting of the following :-a) Timmer astronomical-1, b) Power contactor 63 Amps make- -01 Noc) connector 100 Amps 230 Volts - 03 Nosd) MCB TPN 63 Amps 415 V - 01 Noe) Control fuse 2 Amps -01 NoComplete all as specified andas directed. 62 S&F pin type polymer/porcelain, vitreous, white, brown or green insulator including one galvanized mild steel spindle, two galvanized iron washer and one galvanized iron nut 150 mm height, 150 mm dia for suitable for 22 KV working pressure. Complete all as specified andas directed. 63 S&F Disc type porcelain, vitreous, white, brown or green i nsulator includingone galvanized mild steel spindle, two galvanized iron washer and one galvanized iron nut 145 mm height, 255 mm dia ball and socket type Two-in-assembly for tension with tension clamps for conductor suitable for 22 KV working pressure. Complete all as specified andas directed. 64 Supply and lay rubber mat 2 mtr x 1 mtr,10mm thick 11 KV grade AC elect supply. Complete all as specified andas directed. 65 Supply and lay rubber mat 2mtr x 1 mtr,30mm thick 22 KV grade AC elect supply. Complete all as specified andas directed. 66 Supply and lay rubber mat 2mtr x 1 mtr, 19mm thick 11 KV grade AC elect supply. Complete all as specified andas directed. 67 Supply, jointing and testing Outdoor type cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm. Complete all as specified andas directed. 68 Supply, jointing and testing Outdoor type cable jointing kit for 22 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm. Complete all as specified andas directed. 69 Supply, jointing and testing indoor typeCable jointing kit for 11 KV (Earthed)grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size ofsize 150 sqmm 70 M & L for discharge rod PVC coated suitable for 22KV. With PVC insulated copper conductor cable of size 7/20 of 10mtr long with crocodile clips at the end. Complete all as specified andas directed. 71 M & L for discharge rod PVC coated suitable for 11KV. With PVC insulated copper conductor cable of size 7/20 of 10mtr long with crocodile clips at the end. Complete all as specified andas directed. 72 Supply onlyEngine oil, multi grade premium Genuine oil 15W40 as per manufacturer recommendations in DG sets complete all as specified.Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL. 73 Supply and applying for petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed. Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL. 74 Supply and fill for genuine coolant in 5 litres plastic sealed containerfor topping up in Radiator of DG set located at different locations complete all as specified and as directed. 75 Material and labour for battery leads of PVC insulated, multistranded, copper conductor of size 50 Sqmm of 1.25 metres long each duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations including removal of existing unserviceable one complete all as specified and as directed. 76 Material and labour for battery teriminal brass clamps including removal of existing unserviceable one compete all as specified and as directed. 77 Maintenance and servicing for Comprehensive C Check maintenance service for DG Set of capacity 160 KVAincluding dismantling, cleaning, filter & oil replacement, fuel system overhauling, radiator inspection, valve clearance adjustment, load testing, FIP Caliberation, checking and repair of radiator for leakage,and detailed service report submission as per OEM recommendation to DG setincluding replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 100 KVA DG set installed at Southern Command Signal Centrecomplete all as directed by Engr- in- Charge.Note:- (i)Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii)The work of maintenance shall be carried out through respective authorized dealer whose certificate shall be produced to Engineer - in - charge (iv) Proper record & test results of the same shall be maintained as directed (v)Work shall be carried out at site at different location Work to be carried out by OEM certified technician or approved equivalent. Service reports to be submitted post-maintenance 78 All as per item no. 11.066here-in-above but of capacity 100 KVA. 79 All as per item no. 11.066here-in-above but of capacity 30 KVA. 80 S & FLub oil filter set with O ring, (as perexisting sample) suitable for DG set of capacity 160 KVA. compete all as specified and as directed. 81 S & FLub oil filter set with O ring, (as perexisting sample) suitable for DG set of capacity 100 KVA. compete all as specified and as directed. 82 S & FLub oil filter set with O ring, (as perexisting sample) suitable for DG set of capacity 30 KVA compete all as specified and as directed. 83 S & F diesel filter element set with O ring,suitable forcapacities ofD. G . Set 160 KVA compete all as specified and as directed. 84 S & F diesel filter element set with O ring,suitable forcapacities ofD. G . Set 100 KVA compete all as specified and as directed. 85 S & F diesel filter element set with O ring,suitable forcapacities ofD. G . Set 30 KVA compete all as specified and as directed. 86 S & F air filter element suitable for capacities ofD. G . Set 160 KVAcompete all as specified and as directed. 87 S & F air filter element suitable for capacities ofD. G . Set 100 KVAcompete all as specified and as directed. 88 S & Fair filter element suitable for capacities ofD. G . Set 30 KVAcompete all as specified and as directed. 89 S & F by-pass filter element with O ring suitable for 160KVA DG set compete all as specified and as directed. 90 S & F by-pass filter element with O ring suitable for 100KVA DG set compete all as specified and as directed. 91 S & F by-pass filter element with O ring suitable for 30KVA DG set compete all as specified and as directed. 92 S & Ffan beltcomplete suitable for 100KVA DG set complete all as specified. Make : Fenner/ Dunlop. 93 S & F belt for battery charging alternator complete suitable for 100KVA DG set complete all as specified. Make : Fenner/ Dunlop. 94 S & F rubber hose pipe set for water circuit with clamps complete suitable for 100KVA DG set complete all as specified. 95 M & L for carrying out repairs to AMF panel of 100 KVA DG set at various installation inclduing study, tracing out circuit, testing, replacing all defective parts, rewinding existing power and control wiring with same cables including testing and commissioning complete all as specified and as directed. (Note: Spares like Volt meter, CT, power contactor required for repair will be measuredand paid seperately under relevant items. 96 S & Ffor digital type frequency meter 96 x 96 mm flush/ square pattern compete all as specified. Make: L&T/ AE or equivalent. 97 S & Ffor digital type Ammeter 0-200 /5 Amps 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent 98 S & Ffor digital type Voltmeter 0-500 Volts 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent. 99 S & F for LED indicator lamps R, Y, B with holder 15 mm screw type compete all as specified. Make: Rishab/ L&T/AE/ Legrand or equivalent 100 S & F for battery low maintenance lead acid of capacity 12 volts 135 AH with initial charging including removal of exsting unserviceable one and hand over to store yard compete all as specified and as directed. Make: Exide/ AMCO/ Amaron. 101 S & F for CT cast resin type of ratio 200/5 Amps of suitable VA burden compete all as specified. Make: AE/ L&T/ Nutech/ Amol 102 Supply and fix for lead acid battery 12 Volts 180 AH with initial charging and having indicators to know the status of level of electrolyte complete all as specified and as directedMake- Exide/Amaron. 103 Supply &filling up of transformer oil conforming to IS -335 of 1993 as in topping up / replacementup to desired level of transformer oil capacity and Oil circuit brekar complete all as specified and as directed. [Note: Dielectric strength of oil should not be less than 42 KV/cm complete all as specified and directed.] 104 Supply only breather assembly as per existing size, shape and specification complete for capacity 315 KVA , 11/0.433 Voltstransformers including fresh blue silica gel 105 Painting of transformer after cleaning the body surface of transformer by rubbing with emery Paper to remove oil stains, dust etc and applying one coat of snthetic enamel paintby spray paint incl writing SM No/MES No , capacity of transformer of 315KVA capacity all as directed by Engr-in-Charge 106 Supply and fix for switch air break gang operated HT 11 KV Volt grade out door type, triple poleof capacity 200 amps rating mounted on Polymer based 09 insulator with expulsion fuse set single pole drop out type including Expulsion fuse carriers and fuse element Upto 25 Amp and fitted on steel frame horizontally mechanicallyoperated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangements incl pad locks with key flat iron clamp 50 mm x 6 mm including taking down old unseviceable one complete all as specified and directed. (Universal/Pactil) 107 Supplying, installing, fixing, connecting and testing of polymer based Drop-out fuse set (set of 3 nos), mounted on insulatorswith steel frame 200 Amps capacity, siutable for 11KV, HT system,out door type, including Expulsion fuse carriers and fuse element Upto 25 Amp, including taking down old unserviceable one complete all as specified and directed. Make : Universal/National or its equivalant.Note for Item No 11.094 & 11.095 : The work to be carried out in existing structure. Hence continues shut down will not be available. According to the availabity of shut down timing the contractor shall manage the work in quoated rate only. 108 M&L for Painting of HTpoles including cross arms complete with synthetic enamel paint including filling cavities with filler one coat after cleaning all dust/rust including writing the pole No. and all as directed by Engr-in-Charge 109 M & L for Servicing of Molded Case Circuit Breakers (MCCBs)/ACB in existing panelsincluding cleaning, tightening of connections, checking of mechanical operation, insulation resistance testing, functional testing, lubrication of moving parts, and recording of test results. All tools, materials, labor, and consumables to be included for following capacity:- 110 630 Amps ACB 4 pole,415 volt manual drawout type with micro processor release 111 3 Pole 350A MCCB, 36 kA 112 3 Pole 250A MCCB, 36 kA 113 3 Pole 160A MCCB, 36 kA 114 3 Pole 125A MCCB, 36 kA 115 3 Pole 100A MCCB, 36 kA 116 3 Pole 63A MCCB, 36 kA 117 3 Pole 32A MCCB, 16 kA 118 S & F in repairs ACB 4 Pole, current rating 630 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 kA at 415V, 50Hz, of(Make : L & T Cat No CM96111OOOOX1 or equivalent in Legrand / Schenedier) incl necessary spreaders / cable lugs / nut, bolt and washers if required all as directed. 119 S & F for 4 pole MCCB400 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 120 S & F for4 pole MCCB 250 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 121 S & F for4 pole MCCB 200 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 122 S & F for 4 pole MCCB 160 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand/ Schenedier)complete all as specified and as directed. 123 S & F for 4 pole MCCB 100 /125 A, having breaking capacity 36 kA (Make :L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 124 S & F for 4 pole MCCB 63 A, having breaking capacity 10 kA, (Make : L & Tor equivalent in Legrand / Scheneider) complete all as specified and as directed. 125 M&Lfor switch air break gang operated triple pole mechanically operated mounted on HT insulators horizontal type and MS galvanized steel frame with operating mechnizing worked from ground level including operating rod of size 32 mm dia / 25 mm dia as reqd GI medium grade for current rating upto 200 Amps 22000 volts complete with locking arrangement ,ms clamps ,bolts ,nuts and washers etc.including two coat of aluminium paint over a coat of red oxide primer on ms work complete all as specified complete all as specified and as directed. 126 S&F for drop out fuse assy single pole 22KV , 25 Amps rating complete expulsion fuse element mounted on four /two pole structures complete all as specified and as directed.(Necessaty Nut, bolt and washers should be included in above quoted rate) 127 S&F fordrop out fuse assy single pole 11KV , 25 Amps rating complete expulsion fuse element mounted on four / two pole structuresincluding dismanteling old existing UNSV all as specified and as directed.(Necessaty Nut, bolt and washers should be included in above quoted rate) 128 S&F for pin type insulator, HT Polymer/porcelain vitreous white, brown or green of size 150 mm high and 150 mm dia, ISI marked including one galvanised steel spindle, two galvanised iron washers and one galvanised iron nut suitable for 22000 volts including dismantling insulator any type / any sizecomplete all as specified and as directed. 129 S&F for insulator disc type single disc assembly, ISI marked working pressure 22000 volts, porcelain vitreous white, brown, or green size 145 mm high and 255 mm dia ball and socket with tension clamp to suit the size of conductor (ACSR)including dismantling insulator any type / any size complete all as specified and directed. 130 M&L for aluminium strip 25 x 4 mm of required lengthwith color sleeves for jumpering purpose in 11 /22 KV DP/FPincluding taking down existing aluminium conductor etc complete all as per the direction of Engineer-in-charge. 131 S & Ffor gasket set of 22/11 KV 100 KVA to 400 KVA transformer complete all as specified and directed. 132 S& F for silicagel breather complete all as specified and directed. 133 M&L for Testing of exisiting earthing resistance with suitable digital Earth tester complete all as specified and directed 134 S&Fepoxy based insulator with screw, nuts and bolts fixed on OH reservior roof top and on shaft surfaces not more than 2.00 m apart from fixing aluminium or GI strip complete with fixing arragnment complete all as specified and directed. 135 Supply, laying,testing and commissioning or passing through pipe,XLPE insulated, screened, PVC bedded, galvanisedsteel striporwire armoured,electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area of size 3 core 150 Sqmm 136 Laying in trenches and testing cable XLPE insulated screen PVC bedded galvanized steel strip or wire armoured, electric power cable heavy duty with stranded aluminium conductor, 22000 volts grade of size 3 core X 185 sq mm suitable for earthed system etc complete.(Note-HTcablewill be issued under Sch B free for fixing/laying). 137 Supply, installation and testing complete electronic digital type water level indicator devicesuitable for operating at 230V +/- 10%, 50 Hz sysytem having 150mm size digital display and alarm at low/high level of OHT / sump.The complete unit fitted in MS sheet base in two boxes, one box to be installes at sump/OHR and second at pump house bothunit to be connected with flrxible copper cable of .5 sqmm 8 pair and length from sensor to pump house building or OH reservoirs of 21 mtr and 15 mtr staging,All enclosed in sheet metal enclosures of 02mm thick with hinged door and locking arrangement and support GI wire/PVC pipe etc properly laid or fixed on wall / surface all as directed by Eingr-in-charge.Make- SECO type DDS-6 or equivalent model in Schneider/ Havels/ L&T. 138 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 40 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 139 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 50 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 140 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 75 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 141 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 90 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 142 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 110 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 143 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 120 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 144 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 160 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 145 MISC ITEMS OFEXTERNAL WATER SUPPLY 146 Laying and testing ductile iron pipe with internal cement mortor lining and external zink pipes confirming to IS:8329-2000 with class of pipe K-7 of size 150 mm including rubber tyton joints. Complete all as specified andas directed.Note - DI pipe 150mm bore will be issued under Sch B for fixing only. (Rates of DI fitting required for sch B items will be included in the quoted rates) 147 Laying and testingductile iron pipe with internal cement mortor lining and external zink pipes confirming to IS:8329-2000 with class of pipe K-7 of size 200 mm including rubber tyton joints. Complete all as specified andas directed.Note - DI pipe 200mm bore will be issued under Sch B for fixing only.(Rates of DI fitting required for sch B items will be included in the quoted rates) 148 Laying and testingductile iron pipe with internal cement mortor lining and external zink pipes confirming to IS:8329-2000 with class of pipe K-7 of size 100 mm including rubber tyton joints. Complete all as specified andas directed.Note - DI pipe 100mm bore will be issued under Sch B for fixing only.(Rates of DI fitting required for sch B items will be included in the quoted rates) 149 Supply, fix and testing dual type non return valve of 100 mm bore, cast iron body with both ends flanged,heavy duty (ISI marked) by pass arrangement ,including jointing material, bolts, nuts,rubber packing etc complete confirming to relevent IS. Complete all as specified andas directed. 150 Supply, fix andtesting gun metal dual type non return valve of25mm bore,iron body with both ends flanged,heavy duty (ISI marked) by pass arrangement ,including jointing material, bolts, nuts,rubber packing etc complete confirming to relevent ISComplete all as specified andas directed. 151 M& L for DI fittings & specials such as collar, bends (any type radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces (all socketed or all flanged with an equal & other end taperingbellmouth or flanged plates, connecting pieces straight (both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces ( one end flanged & other end spigot or socket or tatering as bell mouth or flanged ) caps blank flanges heavy duty suitable for run lead joints ofsize from 80 to 200 mm bore. Complete all as specified andas directed. 152 Supply, fix and testing GM gate/globe valves heavy duty conforming to IS 778 with iron wheel head screwed both ends suitable forfollowing sizes ofbore:-Complete all as specified andas directed. 153 25 mm bore 154 40 mm bore 155 50mm bore 156 80 mm bore 157 Install,testingand commissioning of LT distribution outdoor typepanel board compartmentalized fabricated, factory made cubical type dust and vermin proof indoor type power coated 415 volts 3 phase 4 wire 50 HZ front openable with locking arrangement made out of CRCA sheet of 3.15 mm thick with MS angle iron of size 50x50x6 mmto be mounted on floor / wall suitable to accommodate common bus bar and the following accessories:(a) MCCB TPN 100 Amp 25 KA 415 Volt thermal adjustable- 1 No. (b) Copper bus bar 400 Amps. 4 runs duly coloured PVC sleeve (c) Fully automatic star delta starter suitable for 7.5 HP pump set 440 V Model MK-1 Make L and T with electric connection - 02 No. (d) MCCB TP 10 KA 63 Amp - 02 N os (e) MCB DP 32 Amps - 02 Amps(f) Ammete 0-200 amps with CT & selector switch - 01 No (g) Voltmeter 0-500 V with selector switch - 01 No(h) lndiating lamp - LED type RYB ) Complete all as specified andas directed.( Note- LT panel with all fitment accessories shall be issued under Sch B free for fixing ) 158 Install test and commissioning of LT distribution panel board compartmentalized fabricated, factory made cubical type dust and vermin proof indoor type power coated 415 volts 3 phase 4 Wire 50 HZ front openable with locking arrangement made out of CRCA sheet of 2 mm thick with MS angle iron of size 50x50x6 mm to be mounted on floor / wall suitable to accommodate common bus bar and the following accessories :- (a) MCCB TPN 63 Amp 25 KV 415 Volt - 1 No.(b) Copper bus bar 400 amp - 4 runs duly coloured PVC sleeve (c) DOL starter suitable for 3.0 HP pump set 440 V Model MK-1 make L&T with electric connection :- 2 No. (d) MCCB TP 40 Amp 10 KA 415 Volt-2 No (e) MCB DP32 Amp - 2 No.(f) Ammeter 0-100 Amp with CT and selector switches – 1 No(g) voltmeter 0-500 V with selector switch 01 No (h) Indicating lamp LED type RYB – 01 Set.Complete all as specified andas directed.( Note- LT panel with all fitment accessories shall be issued under Sch B free for fixing ) 159 Install, Test, Commissioning of open well submersible pump set 80x80mm for pumping clear water at ambient temperature from UG sump for delivering 25 m3/hours at a total head of 40 mtr complete with suitable electric motor 7.5 HP, 3 phase, 415 volts, 50 HZ with dry run protector and delivering with GI medium grade pipe of 80 mm dia with flanged bend brought outside the sump GL upto 1.0 mtr and including having GI chain/rubber insulated rope of suitable length to lift the pump set with necessary submersible cable connection.Complete all as specified andas directed. ( Note- submersible pump setshall be issued under Sch B free for fixing ) 160 Install, Test, commissioning of open well submersible pump set 25x25 mm for pumping clear water at ambient temperature from UG sump for delivering 165 LPM at a total head of 25 mtr complete with suitable electric motor 3.0 HP, 3 phase, 415 volts, 50 HZ with dry run protector and delivering with GI medium grade pipe of 50 mmdia with flanged bend brought outside the sump GL upto 1.0 mtr and including having GI chain/rubber insulated rope of suitable length to lift the pump set with necessary submersible cable connection .Complete all as specified andas directed.( Note- submersible pump set shall be issued under Sch B free for fixing ) 161 Installation, testing and commissioning of 750 LPM capacity head105 M end suction type centrifugal pump set for water supply assembled and tested for rated efficiency complete with energy efficient motor conforming to IS-12615 common base frame, coupling guard and mechanical seal suitable for operation on 415 ± 10% 50 Hz AC supply slow speed up to 1500 Rpm multistage pump with Bronz impeller includsive of suitable star delta starter inclding cable from starter to motor drawn through flexible metallic conduit pipe starter and suitable PCC foundation etc complete as per manufacturers recommendation. Complete all as specified andas directed. ( Note- Centrifugal pump set shall be issued under Sch B free for fixing ) 162 Installation, testingend suction type centrifugal pump set for water supply assembled and tested for rated efficiency complete with energy efficient motor conforming to IS-12615 common base frame, coupling guard and mechanical seal suitable for operation on 415 Volt + 10%, 50Hz AC supply slow speed up to 1500 Rpm multistage pump with Bronz impeller inclusive of suitable star delta starter inlcuding cable from starter to motor drawn through flexible metallic conduit pipe following capacity inclusive of starter and PCC suitable foundation as per manufacturers recommendations. Capacity 1460 LPM, Head-100M. Complete all as specified andas directed.( Note- Centrifugal pump set shall be issued under Sch B free for fixing ) 163 Supply,install,testing & commissioning of end suction type centrifugal pump set, multistage,bronze impellor,water supply, assembled and tested for rated efficiancy complete with energy efficient motor conforming to IS 12615 common base frame,coupling guard and mechanical seal suitable for operation on 415 volts+/- 10%, 50HZ AC supply of capacity 1500 RPM, 700 LPM, head 70mtr inclusive of PCC foundation ,suction & discharge of pipes as per manufactures instruction.Complete all as specified andas directed.Note:- Cost of suction and discharge pipes upto 7.50 RM long each shall be deemed to be included in the rate quoted. 164 Supply installation,commissioning and testing ofDOSING SYSTEM ( MODEL: ADS-I of ALTOCH) consisting of 40 liter - 100 liter PE/FRP LID & leval gauge along with agitator with shaft and blade in plastic. mounted on tank Complete all as specified andas directed.. (Make : ALTOCH or Equvivalent as approved by Accepting officer) 165 S&F Cast iron body foot valve of size 150 mm bore flanged as per IS 4038 , including nuts, bolts, washers and rubber gaskets, complete all as specified & as directed. 166 Supply installation,commissioning and testing ofdosing pump model 96NGQ51 of Decrain,high presser single head gear motored adjustable dosing pump of following specification:-.(a) Adjustable high presser -0 to 100 PSI (b) Power-230v, 50HZ (c) RPM-44(d) HP 1/10 fractional(e) Out put -2 U.S GPD to 40 USGPDComplete all as specified andas directed.(Make : Decrainor Equvivalent as approved by Accepting officer) 167 S & F Cast iron air release valves with two air outlets of 50mm bore and fixing of cast iron pipe including necessary fittings. Complete all as specified andas directed. 168 Supply,Laying and jointing & testing DI pipe with socket & spigot ends, class K 7 with cement morter lining in side the pipe and zinc coatedout side asper IS 18329/2000 in standard length suitable for push onwith rubber gasket joints(tyton joints) laidintrenchesof size 150 mm bore. Complete all as specified andas directed. 169 Supply, laying, jointing and testing Ductile iron pipes with spigot and socket ends centrifugally cast, Class K-9 conforming to IS-8329of following sizes, in any length, laid in trenches/ pipe supports etc, pressure testing after laying complete a per IS-12288 including styrene butadiene rubber gasket joints, complete all as specified and as directed.NOTE: Tyton joints required are deemed to be included in the unit rate quoted. 170 100 mm bore pipe 171 200 mm bore pipe 172 M&L testing & Commissioning of LT pannel frame CPRI approved, outdoor type,factory made fabircated to CRCA sheet of with min 1.6mm mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of foillowing parts.INCOMER :-(a)MCCB 200 Amp, FP, Thermal Magnetic release, 35 KA- 01 No as IncomerOUTGOING :-(a)MCCB 160 Amp, TPN,Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos(b)MCB SPN 32 Amps - 01 Nos(c)Indicating lamps (Set of 03 Nos) - 01 Set.(d)Star Delta starter 02 Nos with overload relay ragne 60 Amp- 2 Nos (e) Aluminium bus bar chamber (4 Strips) 3 phase 415 volts 200 Amps fixed on insulatorsall as required - 01 Set 173 (f)Digital voltmeter 0-500 volts with selector switch - 01 Set(g)Digital ammeter with CTs & selector switch 0-100 A cap- 03 Set(h) Panel Wiring with suitable size PVC insulated PVC sheathed 1100 volts grade with copper conductor multi-stranded cable with lugs on both ends of cable.(i) Front operated on load change over switch 100 amps.-01 No .Make : L&T/C&S/ABB/Havells(j) Star Delta starter fully automatic, 3 phase, 415 volts, 50 Hzheavy duty with overload relay ragne 60 Amp having protection against single phase, over load and phase reversal protection. - 02 NosMake of starter BCH/L&T/ Seimen/C&S/Havellscomplete all as specified and directed. 174 M&L testing & Commissioning of LT pannel frame CPRI approved, outdoor type,factory made fabircated to CRCA sheet of with min 1.6mm mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of foillowing parts.INCOMER :-(a)MCCB 200 Amp, FP, Thermal Magnetic release, 35 KA- 01 No as IncomerOUTGOING :-(a)MCCB 160 Amp, TPN,Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos(b)MCB SPN 32 Amps - 01 Nos(c)Indicating lamps (Set of 03 Nos) - 01 Set.(d)Star Delta starter 02 Nos with overload relay ragne39 Amp- 2 Nos (e) Aluminium bus bar chamber (4 Strips) 3 phase 415 volts 200 Amps fixed on insulatorsall as required - 01 Set(f)Digital voltmeter 0-500 volts with selector switch - 01 Set(g)Digital ammeter with CTs & selector switch 0-100 A cap- 03 Set 175 (h) Panel Wiring with suitable size PVC insulated PVC sheathed 1100 volts grade with copper conductor multi-stranded cable with lugs on both ends of cable.(i) Front operated on load change over switch 100 amps.-01 No .Make : L&T/C&S/ABB/Havells(j) Star Delta starter fully automatic, 3 phase, 415 volts, 50 Hzheavy duty with overload relay ragne 60 Amp having protection against single phase, over load and phase reversal protection. - 02 NosMake of starter BCH/L&T/ Seimen/C&S/Havellscomplete all as specified and directed. 176 MISC ITEMS B/RWORKS 177 S&F factory made Steel fibre reinforced manhole frame and cover 100mm thick of size 1.20m x 0.60m complete all as specified and directed. 178 M & L for recharging of normal earth pits by excavating the earth at a radius of 600mm from the centre from the earth pit and at a depth of 900mm after removing the earth chambers and accessories carefully and keeping aside for reuse including adding and spreading chemicals as given below in 75mm layers each as ground level and watering, refixing the earth chambers and accessories after allowing the soil to settle down complete all as specified and directed by Engr-in charge.(a) Charcoal 10 kg. (b) Salt 10KgNote :- Excavation , refillingis included in quoated rate 179 Supply and fix for repairs earth chambers by demolishing unserviceable earth chambers and fixing new chambers ofPCC 1:3:6 type C1bed and chamber RCC 1:2:4 type B1of size (600X600X200)mm and thickness 120 mm andand CI cover 10mm thick hinged to CIframe duly groted with PCC, complete all as specified and directed. 180 Construction of valve chamber with PCC solid block masonry grade C-5, 200mm thick having 150mm thick hard core and PCC (1:4:8) type D-2 (using 40mm graded stone aggregate in foundation, including excavation & earth work in any type of soil, internal & external plaster to walls in cement morter 1:6, 15mm thick complete all asspecified and shownon drg No CEPZ/93/TD/20M Sht No 1/1 of following internal dimension:- 181 0.60mtr x 0.60mtr x 0.60mtr 182 1mtr x1mtr x1mtr 183 1.2mtr x1.2mtr x1.2mtr 184 Cutting the existing water line 300 mm dia for inserting Tee Reducer bend, coller etc complete ( Note : CI specials, lead joints excavation and earth work shall be measured and paid separately under relevant item of this schedule ) 185 Moblization of necessary equipment & manpower at site of work to carry out plate load test for determination of K Value (Modules of subgrade reaction) of Soil in the field in accordance to IS 9214-1979, complete in all respect, as specified & directed with & including following operations.(a) Digging out Pit of desired size & depth.(b) Placing & arranging Poclain, as per requirement & recording the settlement data with 03 Nos of dial Gauge in Horizontal Plain Placed at 120 degree, using Hydraulic Jack with proving ring & dial gauze of least count 0.002 mm & submission of report in sixtulicate determining modulus of subgrade reaction K Value.
Contract Date: Feb 06, 2026 Contract Value : ₹ 8.36 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
Maharashtra View Result →
25.
Educational and Research Institute #9407553 AOC
supply of Medicine And Consumable Items , Medicine / Consumable Items / X-Ray Items / Suture Items , 0.035 Coaxial Delivery Catheter 0.035 Distal Jd Coaxial Delivery Catheter Should Be Dgci And Usfda Approved , 0.068’’ Reperfusion Catheter 6F Proximal And Distal Od, 0.068’’ Proximal And Distal Id Should Be Dgci And Usfda Approved , 1.3 / 1.4 A Adult Dialyzer ( Dialyzer- Multiple Use ) , 2 Octyl Cynoacrylate Topical Skin Adhesive 0.5Ml Pen Shaped , 2 Octyl Cynoacrylate Topical Skin Adhesive 0.5Ml Vial , 2-Octyl Cyanoacrylate Liquid Topical Skin Adhesive Packaged Within A Pen Applicator Along-With A Self-Adhering Mesh Of 22Cm , 2-Octyl Cyanoacrylate Liquid Topical Skin Adhesive Packaged Within A Pen Applicator Along-With A Self-Adhering Mesh Of 60Cm , 9.0 Fr, Single Lumen Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Apositioning System For Lap Ventral Hernia Consisting Of A Echo Ps Balloon For Positioning With An Uncoated Light Weight Polypropylene Mesh On One Side And An Absorbable Hydrogel Based Barrier With Bio Resorbable Pga Fibres Based On Sepra Technology On The Other.Various Sizes ( 4.5 / 4.6 / 6 / 6*8 ) , A.V Blood Lines With Av Pressure Transducer Protector For All Machine Types And Dialysizer ( Acceptable For Fitting To All Standard Dializer ) , Set , A.V Fistula Needle 16 G , A.V Fistula Needle 17 G , Abatacept 250Mg. Inj. , Abdaminal Binder 28No. , Abdaminal Binder 30No. , Abdaminal Binder 32No. , Abdaminal Binder 34No. , Abdaminal Binder 36No. , Abdaminal Binder 38No. , Abdaminal Binder 40No. , Abdaminal Binder 42No. , Abdominal Drainage Kit ( Adk Drain ) ( Size - 20, 24, 28, 32 No. ) , Abdominal Drainage Kit 28, 30, 32, 34 , Abdominal Drainage Kit; 16 Size, 2Litre Bag Capacity , Abdominal Drainage Kit; 22 Size, 2Litre Bag Capacity , Abdominal Dressing With Viceral Protective Layer For Compartment Syndrom To Reduce Medial Tension, Ce Certified, Forthird Generation Npwt System, 66.5*80.2 Cm , Abg Sampling Syringe With Pre Heparin Dry Lithium ( 23.5 Iu / Ml ) , Above 40 Microns Sterile , Abscess / Bilary Drinage Catheter ( Pigtail ) With Needle , Abscess / Biliary Drinage Catheter ( Straight ) , Abscess / Biliary Drinage Catheter ( Pigtail ) , Abscess Biliary Drinage Sets Pigtail Type , Abscess / Biliary Drinage Sets Malecot Type , Absolute Ethanol100 Mlsolutions , Absorbable Adhension Prevention Orc Knitted Film 3X4 , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Absorbable Gelatin Spongeu.S.P Regular80mmx 50Mmx10mm ( 2 Pcs. Packet ) , Absorbable Gelatin Sponge Based Topical Absorbable Hemostat Without Formaldehyde. Should Be Sterilized By Dry Heat, 20Cmx7cmx0.05Cm. , Absorbable Gelatin Sponge Based Topical Absorbable Hemostat Without Formaldehyde. Should Be Sterilized By E-Beam Irradiationm 0.3X8cm , Absorbable Gelatin Sponge Should Not Be Cross Linked By Formaldehyde. Should Be Sterilized By Dry Heat, 7Cm X 5Cm X 1Cm. , Absorbable Hemostat Powder With Microporous Polysaccharide Hemosphere ( Mph ) Technology In One Single Sterile Pack For 5Gm In Bellow Applicator , Absorbable Hemostat Powder With Mph ( Microporous Polysaccharide Hemosphere ) Technology In One Single Sterile Pack Of 1Gm In Bellow Applicator-Us Fda Approved , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 0, 1 / 2 Circle Taper Point, 30Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 0, 1 / 2 Circle Taper Point, 45Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 30Cm, 26Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 30Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 45Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 3-0, 1 / 2 Circle Taper Point, 45Cm, 26Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 3-0, 3 / 8 Circle Rc, 45Cm, 19Mm. Unidirectional , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4204 Size : 2-0, Chromic-Straight R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4205 Size : 0, Chromic-Straight R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4208 Size : 2-0, Chromic-Straight R B, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4213 Size : 0, Chromic-Straight R B, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4216 Size : 2-0, Chromic-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4217 Size : 0, Chromic-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4220 Size : 2-0, Chromic-3 / 8 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4221 Size : 0, Chromic-3 / 8 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4225 Size : 0, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4275 Size : 1, Chromic-1 / 2 Circler B & 1 / 2 Circle R C Da, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4276 Size : 0, Chromic-1 / 2 Circler B &1 / 2 Circle R C Da, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4277 Size : 2-0, Chromic-1 / 2 Circler B &1 / 2 Circle R C Da, 36Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4278 Size : 2, Chromic-1 / 2 Circle R B, 65Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4279 Size : 0, Chromic-1 / 2 Circle T C Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4280 Size : 4-0, Chromic-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4281 Size : 5-0, Chromic-3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4288 Size : 3-0, Plain-Straight Cutting, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4295 Size : 2-0, Chromic-1 / 2 Circle R B, 38Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4296 Size : 0, Chromic-1 / 2 Circle R B, 38Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4297 Size : 1, Chromic-1 / 2 Circle T C Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4297A Size : 1, Chromic-1 / 2 Circle T C Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4826 Size : 1, Chromic-3 / 8 Circle R B D A, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5007 Size : 3-0, Plain-Straight R B, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5010 Size : 3-0, Plain-3 / 8 Circle Cutting, 22Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5020 Size : 3-0, Plain-3 / 8 Circle Cutting, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5033 Size : 2-0, Plain-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5048 Size : 4-0, Chromic-3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures4237 Size : 3-0, Chromic-1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2003 Ldl Size : 2-0, 1 / 2 Circle Cutting 30Mm, Da, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2214 Size : 0, Chromic-1 / 2 Circle R B, 30Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2215 Size : 1, Chromic-1 / 2 Cirle R B Heavy, 40Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2216 Size : 2, Chromic-1 / 2 Circle R.B.Mayo, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4113 Size : 2-0, Chromic-3 / 8 Circle R B, 32Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4114 Size : 0, Chromic-3 / 8 Circle R B, 32Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4123 Size : 2-0, Chromic-1 / 2 Circle R B, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4124 Size : 0, Chromic-1 / 2 Circle R B, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4200 Size : 2-0, Chromic-Straight R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4201 Size : 3-0, Chromic-3 / 8 Circle Cutting, 22Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4226 Size : 1, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4226T Size : 1, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4227 Size : 1, Chromic-1 / 2 Circle R B Mayo, 45Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4228 Size : 2, 1 / 2 Circle Rb 45Mm Mayo, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4229 Size : 0, Chromic-1 / 2 Circle R B Mayo, 45Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4232 Size : 2-0, Chromic-3 / 8 Circle R B, 65Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4233 Size : 0, Chromic-3 / 8 Circle R B, 65Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4237 Size : 3-0, Chromic-1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4238 Size : 3-0, Plain-1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4239 Size : 1, Chromic-1 / 2 Circle Tr P Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4241 Size : 2-0, Chromic-1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4242 Size : 0, Chromic-1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4244 Size : 2, Chromic-1 / 2 Circle Tr P Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4245 Size : 2-0, Chromic-1 / 2 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4246 Size : 0, Chromic-1 / 2 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4248 Size : 1, Chromic-1 / 2 Circle R B Heavy, 50Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4249 Size : 2-0, Chromic-1 / 2 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4250 Size : 0, Chromic-1 / 2 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4255 Size : 2-0, Chromic-1 / 2 Circle Cutting Heavy, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4258 Size : 0, Chromic-1 / 2 Circle R B Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4259 Size : 1, Chromic-1 / 2 Circle R B Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4262 Size : 1, Chromic-3 / 8 Circle Cutting, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4264 Size : 0, Chromic-5 / 8 Circle R B, 35Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4267 Size : 1, Chromic-3 / 8 Circle R B Blunt, 63Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4268 Size : 5-0, Chromic-3 / 8 Circle R C , 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4269 Size : 5-0, Plain-3 / 8 Circle R C , 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4270 Size : 4-0, Plain-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4271 Size : 3-0, Plain-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4272 Size : 3-0, Chromic-1 / 2 Circle R C, 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4273 Size : 1, Chromic-1 / 2 Circle R C, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4274 Size : 3-0, Chromic-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 26Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 36Mm 1 / 2 Circle Reverse Cutting Os-6 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 40Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 48Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 48Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Reverse Cutting Os-6 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 40Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 48Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 48Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 26Mm 1 / 2 Circle Taper Point Ct-2 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 26Mm 1 / 2 Circle Taper Point Sh Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 19Mm 3 / 8 Circle Reverse Cutting Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 24Mm 3 / 8 Circle Reverse Cutting Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 26Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbent Cotton Roll 100 Gm Each Consumable , Absorbent Cotton Wool Ip 500 Grms. , Aceborophylline 100 Mg Cap , Aceclofenac 200 Mg+Cyclobenzaprine 15Mg Tab. , Aceclofenac 200 Mg+Thiocolchicoside 16 Mg Tab. , Aceclofenac Ip 1.5%W / W + Linseed Oil 3.0%W / W + Capsaicin 0.025%W / W + Methyl Salicylate I Ip 10%W / W + Menthol Usp / Bp 5%W / W + Benzyl Alcohol 1%W / W - 30Gm Ointmentointment , Acitrom 2Mg Tablets , Actinomycin-D ( 0.5Mg Vial ) , Vial , Acyclovir 0.5 %W / Wointment , Acyclovir Ip- 400Mg / 5Ml ( 100Ml Bottle ) Syp , Acyclovir Ip- 800Mg Tab. , Adapalene 1 %W / W Gel , Adhesion Barrier Matrix2x2 Inch 2X2 Inch , Adhesion Barrier Matrix3x3 Inch 3X3 Inch , Adhesion Barrier Matrix ( 1X1 ) . , Adhesion Barrier Matrix ( 1X3 ) . , Adhesion Barrier Matrix ( 2X2 ) . , Adhesion Barrier Matrix ( 3X3 ) . , Adhesion Barrier Matrix ( 4X5 ) . , Adhesion Barrier Matrix 1X1 Inch , Adhesion Barrier Matrix 1X3 Inch , Adhesion Barrier Matrix 4X5 Inch , Adhesive Plaster 10 Cm X 8 Mtrs Each Roll , Adhesive Plaster 7.5 Cm X 10 Mtrs Each Roll , Adhesive Plasters Usp 7.5 Cm X 5 Mts / Roll , Adrenaline 0.005 Mg+ Lignocaine 2 %W / V Injection , Adrenochrome Monosemicarbazone0.75 Mg.Ml 2Ml Amp. Inj. , Adultarterial Filter Withbypass Loopthe Arterial Filter Should Be For Adult Use. Priming Volume Should Not Be More Than 120Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or 3 / 8. The Filter Should Allow Maximum Blood Flow Rate Of 4.0 To 6.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Adult Arterial Cannulae For Arch Cannulation Dlp Metal Tip Curved Arterial Cannulae Without Vented 3 / 8 Inch Connector, Sizes- 20, 22, 24 , Adult Arterial Cannulaefor Arch Cannulation. Dlp Straight Tip Arterial Cannulae, Connection Site 3 / 8 Inch, Sizes -16, 18, Fr , Adult Double Lumen Catheter Setfr-12 Fr, 16 Cm ( Curved ) , Adult Double Lumen Catheter Set Fr-12 Fr, 13 Cm. ( Curved ) , Adult Double Lumen Catheter Set Fr-12 Fr, 13 Cm. ( Straight ) , Adult Double Lumen Catheter Set Fr-12 Fr, 16 Cm ( Straight ) , Adult Penile Clamp; Made Of Soft Material, Reusable And Washable , Advance Bipolar Hand Activated Probe For Open Surgery With 13Mm Shaft Diameter And 20 Cm Shaft Length, 6 Mm Wide Straight Jaw Design With Jaw Length Of 38 Mm , Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy , Having Separate Seal And Cut Buttons, Capable Of 360 Degrees Rotation , Advanced Rf Energy Hand Instruments Of 12Mm Shaft Diameter For Open Procedureswith Shaft Lengths 22Cm And Should Be Both Hand & Foot Activated. Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated. Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedureswith Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Aicd Device+ Leads ( Fda Approved Not Ce Approved ) , Air Mattress , Albendazole Tab ( 200 Mg ) , Tablet , Albumin 25% Injection , Aldehyde Free Instand Surface Disinfectant Low Lintwipe, Size 12 X 12.5 Inches In Bucket Each 100Gms Contanins- 1 Propanol 6Gm 2 Orioabik 9Gms Abd Etgabik 10Gms , Aldehyde Free Surface Disinfactant Cleaner ( Conc. ) With Material Protection Factor Containing Dodecylbispropylene Triamine 5 Gm With Surfactants, Antifoaming Agents 500 Ml Solution , Alendronate 70 Mg Tab. , Alkyldimethyl Benzyl Ammonium Chloride ( Bkc ) I.P- 13.80%W / V, Didecyl Dimethyl Ammonium Chloride - 9.2% , Alkyldimethyl Benzyl Ammonium Chloride ( Bkc ) Ip- 13.6% W / V, Didecyl Dimethyl Ammonium Chloride 13.0% W / V, Polymeric Biguanide Hydrochloride ( Phmb ) - 5.0% , All Human ( Bovine Aprotinin Free ) Fibrin Sealant - 1Mla Package ( Different Skus - 1Ml, Containing : One Vial Of Bac2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions All Human Formulation Free Of Bovine Aprotinin Triple-Lumen Tip To Prevent Clogging Inside The Applicator Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , All Human ( Bovine Aprotinin Free ) Fibrin Sealant - 2Mla Package ( Different Skus - 1Ml, Containing : One Vial Of Bac2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions All Human Formulation Free Of Bovine Aprotinin Triple-Lumen Tip To Prevent Clogging Inside The Applicator Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , All In One Hand Control Device For Laparoscopic Suction, Irrigation, , Cut, Coag Assembly , All In One Ptfe Coated Ez Clean Laparoscopic Electrosurgical Electordes Compatible With All In One Hand Control Device , All-Human ( Bovine Aprotinin Free ) Fibrin Sealant , All-Human Formulation Free Of Bovine Aprotinin , Alprostadil ( Prostaglandin E1 ) Usp 500Mcg / 1Ml Inj. , Alteplase 50Mg.Inj. , Aluminium Hydroxide + Aluminium Hydroxide + Magnesium Hydroxide + Simethicone 200Ml Syp. , Ambo Bag Silicone Ruber Complete Set All Size , Ambo Lmadisposable Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. Sizes- 1, 2, 3, 4 5, 6 , Ambo Lma Reusable Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. Sizes- 1, 2, 3, 4, 5, 6 , Ambu Bag Adult ( Silicon ) , Ambu Bag Child ( Silicon ) , Amikacin + Dexa5gm. Ointment , Amikacin + Dexa 5Ml 5Ml Eye Drop , Amikacin Eye Dropeye Drop , Amino Acid 10% 500Ml With Taurine ( 51G ) Without Sorbitol & Xylitol Iv , Amino Acid 5% 250Ml Without Sorbitol ( 12.5G ) Iv , Amino Acid With Tauin 500Ml Ffs Bottle 500Ml ( 10% ) Iv , Aminoacid ( Essential ) Infusion ( 10% 100Ml Ffs Bottle ) , Bottle , Aminoacid 5% - Ivf ( 100Ml Bottle ) , Infusion , Aminocaproic Acid 5 Mg Inj. , Aminophylline 250 Mg / 10 Ml Vial Injection , Aminophylline 25Mg / Ml 10Ml Amp Inj. , Amiodarone 150Mg Tablets , Amipriprazol-10Mg. Tab. , Ammoidine 0.75 Solution , Ammoidine0.75%+Amminobenzoic Acid2% ( Melanocyl Ointmentment ) Ointment , Amniotomy Spike Cot. Inbuilt With Plastic Hook, Sterilized Single Pack . , Amoxicillin Cloxacillin And Lactic Acid Bacillus Capsules 250Mg , Amoxycylline+ Cloxacillinic 125Mg / 31.25Mg ( 30Ml ) Syp. , Ampicillin Trihydrate- 500Mgcap. , Amplatz Extra Stiff Guide Wire , Amplatz Extra Stiff Guide Wire Floppy Tip 0.035X150 & 260 Cm , Amplatz Extra Stiff Guide Wire J Tip 0.035X150 & 260 Cm , Amplatz Sheath With Dilator, No.20 , Amplatz Sheath With Dilator, No.26 , Amplatz Sheath With Dilator, No.28 , Amplatz Sheath With Dilator, No.30 , Analyser Cell Counter Printing Roll 5Cm. , Anattomical Facemask With Inflatable Seal Size 0 , Anattomical Facemask With Inflatable Seal Size 00 , Anattomical Facemask With Inflatable Seal Size 00, 0, 1, 2, 3, 4, 5 , Anattomical Facemask With Inflatable Seal Size 1 , Anattomical Facemask With Inflatable Seal Size 2 , Anattomical Facemask With Inflatable Seal Size 3 , Anattomical Facemask With Inflatable Seal Size 4 , Anattomical Facemask With Inflatable Seal Size 5 , Anesthesia Breathing Circuits - 16 - 40 ( 41Cm - 101Cm ) Adult Expandable Circuits . , Anesthesia Breathing Circuits - 20-40-60 ( 51 Cm-101 Cm-152 Cm ) Segmented Expandable Extension Set . , Anesthesia Breathing Circuits - 33-87 ( 84 Cm-221 Cm ) Adult Expandable Circuits . , Anesthesia Breathing Circuits - 72 ( 183 Cm ) Adult Circuits With Gas Sampling Connectors . , Anesthesia Silicon Airwaysize - 000, 00, 0, 1, 2, 3, 4, 5, 6 , Angio Kit , Angiographic Catheters 5F Al 1.0 , Angiographic Catheters 5F Al 2.0 , Angiographic Catheters 5F Ar 1.0 , Angiographic Catheters 5F Ar 2.0 , Angiographic Catheters 5F Ima 1.0 , Angiographic Catheters 5F Jl 3.0 , Angiographic Catheters 5F Jl 3.5 , Angiographic Catheters 5F Jl 4.0 , Angiographic Catheters 5F Jr 3.5 , Angiographic Catheters 5F Jr 4.0 , Angiographic Catheters 5F Mpa 1.0 , Angiographic Catheters 5F Ntr , Angiographic Catheters 5F Pigtail 110Cm , Angiographic Catheters 5F Pigtail 150Cm , Angiographic Catheters 5F, 6F , Angiographic Catheters 5Ftig 1 , Angiographic Catheters 6F Al 1.0 , Angiographic Catheters 6F Al 2.0 , Angiographic Catheters 6F Ar 1.0 , Angiographic Catheters 6F Ar 2.0 , Angiographic Catheters 6F Ima 1.0 , Angiographic Catheters 6F Jl 3.5 , Angiographic Catheters 6F Jl 4.0 , Angiographic Catheters 6F Jr 3.5 , Angiographic Catheters 6F Jr 4.0 , Angiographic Catheters 6F Mpa 1.0 , Angiographic Catheters 6F Ntr , Angiographic Catheters 6F Pigtail 110Cm , Angiographic Catheters 6F Pigtail 150Cm , Angiographyintroducer Set 5, 6, 7, 9 Fr With 15 & 23 Cm , Angiographyintroducer Sheath 5, 6 , 7, 9 Fr 15 Cm, 23Cm , Angiojet Boston , Ankle Brace S / M / L , Ankle Wrap S / M / L , Anti - D 50Iu Inj. , Anti Fungal Eye Ointmentointment , Anti Microbial Gloves Size - 6 To 8 , Anti Rabies Immunoglobulininj. , Anti Rabies Vaccines Curently Aooroved For Use In India Through Id Route Are Rabipur ( Pcec ) ( Verv ) , Abhayrab ( Pvrv ) And Pasteur Institute Of India, Coonoor ( Pvrv ) 1Ml Inj. , Anti Snake Venom Antiserum30 Ml Vial Polyvalent Anti Snake Venum Serum Enzyme Refined Reconstitute With10 Ml Of Sterile Water For Ection. Contain Equivalent Of 10 Ml Ofpurified Equine Globulin, 1 Ml Of Reconstitutedserum ( Powder Foam ) Inj. , Anti Uv Impregnated Pe Extension Tube For Light Sensitive Drugs.L-200Cm.. , Anti Uv Impregnated Pe Extension Tube For Light Sensitive Drugs. L-150Cm.. , Anti- Uv Impregnated Polyethylene Extention Tube For Light Sensitive Drugs, L- 150Cm, 200Cm. , Antibiotic Impregnated Medium Pressure Shunt / Shunt Should Be Impregnated With Rifampicin And Clindamycin Hydrochloride. It Should Leach Out For At Least 28 Days. Both Catheters To Have An Inner Diameter Of 1.3 Mm And An Outer Diameter Of 2.5 Mm And Should Have X-Ray Deductible Markings. . , Antimicrobial Silver Dressing With Nanocrystalline Technology 10X120 Cm , Antirust Solution With > 30% Phosphoric Acid- 1 Ltrsolution , Antiseptic Lotion ( Hospotal Const. ) Chlorodemine Glouconatesolu Ip 7.5%V / V +Cetrimide Ip15%W / V 1 Lt.Bot. Liquid , Aortic Punch Long Handle A Conical Tip Should Be There For Easy Insertion By Straight Orbutton Hole Technique, Ten Blade Sizes Fortrimming To Desired Size And Shape. Sizes - 3.5, 4Mm , Aortic Root Cannula With Vent Lineradioopaquetipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 , Aortic Root Cannula With Vent Line Radioopaque Tipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 12, 14Fr , Aortic Root Cannula With Vent Line Radioopaquetipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 , Applic-Instr F / Sternal Closure Implants , Aprin Polyster Std Size , Aqueous Solution Of Haemocoagulase, Isolated From Bothrops Atrox 0.2 Cu , Chlorhexidine Gluconate Solution Ip 0.1% V / V ( As Preservative ) 10Mlnasal Drop , Arm Pouch ( Regular ) S / M / L , Armored Tube Made Of100% Siliconized Latex, Radio Opague, Mounted Connector, Pilot Balloon With Universal Port Size- 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 . , Armored Tube Made Of 100% Silicon, Radio Opaque, Should Have Prefilled Stylet Mounted Connector, Pilot Balloon With Universal Port.All Sizes. Fda / Ce Approved All Sizes. Fr- 2, 2.5 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 , Arterialcatheter With Flow Switch Andstraight Guide Wire, G-18, L-6 / 13Cm . , Arterialcatheter With Flow Switch Andstraight Guide Wire, G-20, L-6 / 13Cm . , Arterial Cannulawith Flow Switchmechanism20 G , Arterial Catheter Made Of Polyurethanematerialwith Integral Extension Line.Havingangeled Suture Wingswith Lowprofile . Size 20 G , Arterial Catheter Made Of Polyurethanematerialwith Integral Extension Line.Havingangeled Suture Wingswith Lowprofile . Size - 18 G , Arterial Catheter With Straight Guide Wire G-20, L-8Cm, G-18, L- 10Cm . , Arterial Filter Adult The Arterial Filter Should Be For Adult Use. , Arterial Line 20G X 8Cm , Arterial Line 22G X 6Cms / 8Cms , Arterial Puncture Needle18 G , Arteriotomy Shunts ( Intracoronary Long Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.5, 2.0 , Arteriotomy Shunts ( Intracoronary Long Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.5, 2.0 , Arteriotomy Shunts ( Intracoronary Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 2.75 & 3.0 , Arteriotomy Shunts ( Intracoronary Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.00, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 2.75 & 3.0 , Artesunate + Sulphadoxine + Pyrimethamineip ( Age Group 15 Or Above ) ( 200 Mg ( 3Tab ) + 750 Mg ( 2Tab ) + 37.5 Mg ( 1Tab ) ) , Combi Blister Pack , Artesunate 100 Mg ( 3 ) + Sulphadoxine750mg + Pyrimethamine 37.5Mg Ip ( 1 ) Age Group Between 5 To 8 Years Tab. , Artesunate Lets ( 3 ) 200 Mg And 2Lets Of Sulphadoxine 750 Mg + Pyrimethamine 37.5 Mg Lets Ip ( Age Group 15 Or Above ) Tab , Artificial Heart Valve Bileaflet Mitralmade Up Of Pure Pyrolytic Carbon, Optimal Profile Height, Should Have 80-90 Degree Leaflet Opening Angle, Should Have Flared Inlet At Inflow Sizes- 25, 27, 29, 31 , Artificial Heart Valve Bileaflet Mitral Bileaflet Mechanical Heart Valve Rotatable, The Material Used Is Pyrolytic Carbon On A Graphite Substrate, 80-90 Degree Opening Angle Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Artificial Heart Valve Single Leaflet Mitralmade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle, Should Have Flared Inlet At Inflow, Sizes- 25Mm, 27Mm, 29Mm, 31Mm , Artificial Heart Valve Single Leaflet Mitral Sinlge Leaflet Tilting Disc Mechanical Heart Valve Rotatable Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Ascorbic Acid ( 75 Mcg ) + Vitamin D3 ( 400 Iu ) + Biotin ( 150 Mcg ) + Cyanocobalamin ( 7.5 Mcg ) + Zinc Sulphate Monohydrate ( 63 Mg ) Tab , Ascorbic Acid ( Vitamin C ) I.P. 500Mgtab , Ash Brace S / M / L , Aspiration Catheter , Aspiration Catheter 6F, 7F , Aspiration Pump Aspiration Pump , Along With 1000Mi Disposable Vacuum Cannister Capable For Maintaining And Delivering Pure Vacuum Should Be Dgci And Usfda Approved , Aspiration Pumpaspiration Pump , Along With 1000Ml Disposable Vacuum Cannister Capable For Maintaining And Delivering Pure Vacuum Should Be Dgci And Usfda Approved , Aspiration Tubing For Connection With Aspiration Pump Should Be Dgci And Usfda Approved , Aspiration Tubingfor Connection With Aspiration Pump Should Be Dgci And Usfda Approved , Aspirin ( 75Mg ) + Atorvastatin ( 20Mg ) + Clopidogrel ( 75Mg ) Tab. , Aspirin Low Dose 75Mgtab , Asthalin Nebulization Solution1 Solution , Atenolol . - 100Mg Tab. , Atraumatic Dual Density, Flexible, Ultra Soft, Round Distal Tip Catheter For Closed Suctioning With Bronchoscopy Provision , Atropine Sulphate Eye Drops - 1% ( 5 Ml Vial ) Eye Drop , Atropine Sulphate Eye Ointment 1% ( 3 Gm Tube ) Eye Ointment , Auto Collect Single Device Blood Container For Collection And Storage With Plain Polystyrene Crystals. Sterilized, Needle1, Red Cap1, Female Luer White Lock Cap, Self Destroy Plunger , Capacity- 3Ml, 5Ml. . , Av Cassette Blood Lines Adult + Filtrate Line ( A / V 143 Ml ) Compatible With Multifiltrate Machine , Avigomicro Guide Wire , Avigo Micro Guide Catheter , Azathioprine 50Mg. Cap. , Azithromycin Eye Ointment , B.B Silk ( 12 Foils / Pkt ) ( 3 / 8 Rcut Needle 45 Mm Length 76 Cm, Size 2 / 0 ) ) , Consumable , B.B Silk Size-3 / 0 ( 12 Foils / Pkt ) ( 3 / 8Cir Rcut Needle 26Mm Length 76 Cm ) , Needle , B.B Silk With 1 / 2 Cir Rb Needle Size:1 / 0 20 Mm Length 75 Cm Non Absorbable Surgical Sutures Usp Surgical Material , B.B Silk With 1 / 2 Cir Rb / Cutting Needle 30 Mm Length 75 Cm Non Absorbable ( Size 2-0, 12 Foils / Pkt ) , Consumable , B.B. Silk 6 Reels X 25 Mts Length 25 Mts.Black Braided Silk Without Needle In Reels Non Absorbable Surgical Sutures Usp-, 2-0 ( 6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ) , Surgical Material , B.B. Silk 6 Reels X 25 Mts Size:1 / 0 ( 6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ) , Surgical Material , B12.500Mg. Inj. , Baby Care Sheets Super Absorption Surface, Spill Proof, Antimicrobial Finish, Easy To Wash, Size: 0.7M X 0.5 M , Baby Drape Translucent Soft Polyfilm ( Size-1.2X1.2M ) Incise Area 25X20cm. . , Baclofen 25 Mg Tab. , Baclofen 30 Mg Tab. , Baclofen 5 Mg Tab. , Bain Circuit , Bains Circuit ( Ce Certified ) ( Set Comprisingpatient End Mount, 22Mm Corrugated Plastic Hose X 1.6 Mtrs Long, Short Tubing Nipple, 22Mm / 22Mm Male / Female Circuit Adaptors X2, Distal End Mound, Long Tubing Nipple, Pvc Tubing X3mtrs, 22Mm Heidbrink Expiratory Valve 158Mm / 22Mm Angle Mount, 2Ltr. Breathing Bag, With Mount, 23Mm Male Plug In Mount ( 9012 ) , 23Mm / 23Mm, Female / Famale Circuit Adaptor ( 9036 ) In A Plastic Bag Finish. . , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 10Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 10 Mm. Used Tor Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 10Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 10 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 15Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 15 Mm. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved. , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 15Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 15 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved. , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 20Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 20 Mm. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 20Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 20 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcation Aneurysm Coiling 4Mm Diameter Intracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 4 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascuiar Purpose.Shouldbe Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcation Aneurysm Coiling 4Mm Diameterintracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 4 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcationaneurysm Coiling 7Mmdiameter Intracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 7 Mm Used For Treatment Of Vascular Occlusive Disease & Bai|Oon Assisted Coiling Of Termina & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcationaneurysm Coiling 7Mmdiameterintracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 7 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Baloon Cahtheter4, 5, 6, 7, 8 Mm With 4, 6, 8, 10 Cm , Baloon Inflammation Pump20, 40Atm , Band Ligator Set , Bandage, Cast Plaster, 6X 5 . , Bandage, Cast Plaster, 6X 5Y . , Bandage, Plaster, Xfst 5X5yd . , Barium Sulphate500 Gm.Powder , Barium Sulphate Power Susp 95% W / V, Powder ( Hd ) 95% W / V 250% W / V 400 Gram100 Solution , Battery Operated Articulating Laparoscopic Vascular Stapler With 4 Rows Staple Line Of 35Mm, 30Mm Cut Line, 360 Degrees Rotation, 50 Degrees Articulation On Both Sides, 9Mm Shaft Width , Battery Operated Powered Circular Stapler With 3 Dimensional Stapler Design And Atraumatic Gripping Surface For End To End Anastomosis Size 21Mm / 23Mm / 25Mm / 29Mm / 31Mm , Bcg ( 1 Ml Each ) , Syrings , Beclomethasone Inhalation I.P. 200 Mcg Per Dose Inhaler , Benzathine Penicillin 6 Lac Inj. , Benzyl Nicotinate ( 2Mg ) + Heparin ( 50Iu ) Ointment , Benzyl Penicillin, I.P 10 Lac Vial Inj. , Betamathasone 0.1%, 5Ml Eye Drop , Betamethasone Dipropionate Ointment 0.05% ( 15Gm ) Tube Ointment , Betamethasone Valerate + Gentamicine Sulphatetolnafrate+ Iodochlorhydroxyquin Ointment , Betamethasone Valerate +Gentamycine Cream 0.1% + 3%, 10Gm. 0.1% + 3%10 Gm Cream , Betamethasone Valerate 0.0012 Ointment , Betamethosome Valerate Ointment Cream Ip 0.12% 15Gmointment , Bilary Stent Double Pigtail 10 Fr - 10 Cm Length , Bilary Stent Double Pigtail 10 Fr - 7 Cm Length , Bilary Stent Double Pigtail 7 Fr - 10 Cm Length , Bilary Stent Straight 10 Fr - 10 Cm Length , Bilary Stent Straight 10 Fr - 7 Cm Length , Bilary Stent Straight 7 Fr - 10 Cm Length , Bilary Stent Straight 7 Fr - 7 Cm Length , Bilary Stentdouble Pigtail 7 Fr - 7 Cm Length , Bilary Stents , Bilbao Dotter , Bilbao-Dotter Hypotonic Duodunography Sets- 14F, Tube Length125 Cm, Tube Sideports 06, Tube Tip- Closed End, Torque Cable Diameter- 0.0625, Torque Cable Length -125Cm. , Biliary Balloon Catheter ( Triple Lumen ) Disposable , Biliary Stent - Tannebaum , Biliary Stents10x100, 10X120 And 10X80 , Bioabsorbable & Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Bioabsorbable& Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Biodegradable Material Biomatress Cover Mattress Protection Sheath For Infant And Neonates Non Allergic, Latex Free, Environmental Friendly Size.Fda / Ce Certified. . , Biopsy Forcep For Endoscopic Upper Gi , Biopsy Forceps Lower Gi Endoscopy , Bioresorbable High Absorbent Pur Easter Foam For Endoscopic Sinus Surgery. Size-4 / 8Cm. Fda Approved . , Bi-Pap Full Face Mask Kit ( Adlut ) , Bi-Pap Full Face Mask Kit ( Pediatrics ) , Biphasic Isophane Insulin30 / 70 40Iu / Ml ( 10 Ml Vial ) Inj. , Biphasic Isophane Insulinip ( 30% As Soluble Insulin & 70% As Isophane Insulin ) , Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Suspension Contains 40 Iu ( 10Ml Vial ) Inj. , Bipolar Cautery Forceps Bayonet Shaped 6 Inches Working Length, 1Mm Tip , Bipolar Cautery Forcepsbayonet Shaped 8 Inches Working Length, 1Mm Tip , Bisacodyl - 5Mg Tab , Bisacodyl ( 5 Mg ) , Suppository , Bishmuth 500 Gm Powder , Bisoprolol 10Mg Tablets , Bi-Spectral Index Monitor For Measuring The Depth Of Anaesthesia , Black Braide Silk Reel 2-0, 25Mtr , Black Braide Silk Reel 3-0, 25Mtr , Black Braide Silk Reel 4-0, 25 Mtr , Black Braided Silk - Reels -Size 1 , Black Braided Silk - Reels -Size 2-0 , Black Braided Silk - Reels -Size 3-0 , Black Braided Silk - Size : 1-0, 1 / 2 Circle R C, 38Mm, 75Cm ( Each Foil ) , Black Braided Silk - Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm ( Each Foil ) , Black Braided Silk Nonabsorable Suture Usp Size 0 30Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Oval Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 22Mm, 1 / 2 Circle Oval Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 6 / 0 10Mm, 3 / 8 Circle Rc Micro Point, 38Cms , Black Braided Silk Nonabsorable Suture Usp Size 6 / 0 8Mm, 3 / 8 Circle Rc Micro Point, 38Cms , Black Braided Silk Nonabsorable Suture Usp Size 8 / 0 8Mm, 3 / 8 Circle Spatulated Micropoint, 38Cms Virginsilk , Black Braided Silk Reels Non Sterile Size 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 1 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 2 / 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 3 / 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 4 / 0 ( 25 Mtr ) , Black Braided Silk With Needle Suture , 1 / 2 Circle Round Body , 30Mm, 90Cm, 2-0 , Black Braided Silk With Needle Suture , 3 / 8 Circle Cutting, 45Mm, 76Cm, 2-0. , Black Braided Silk With Needle Suture , 3 / 8 Circle Cutting, 60Mm, 76Cm, 1No. , Black Braided Silk* 1 75Cm , 37Mm, 1 / 2 Circle, Taper Point, Black , Black Braided Silk* 2-0 75-76Cm , 25-26Mm, 1 / 2 Circle, Tapercut, Black , Black Braided Silk* 3-0 75-76Cm , 20Mm, 1 / 2 Circle, Taper Point, Black , Bladder Wash Syringe, 60Ml Or 70Ml, Piston Type , Blades For Craniotome ( Manman ) , Bleaching Powder Gr-Ii Is 1065 / 1989 With Upto Date Amendment Packed In 25 Kg Hdpe Bags Isi Marked Stable , Blood Administrations Set , Blood Bag Double 350 Ml . , Blood Bag Single 350 Ml . , Blood Bag Transfer 350 Ml . , Blood Bag Triple 350 Ml . , Blood Bag Triple 350 Ml Sagm . , Blood Glucose Testing Strip For Glucometer ( Compatible Glucometer Should Be Made Available Without Cost One For Every 500 Strip With Replacement Guarenty ) ( 50 Strip Box ) . , Bluthane Stent , Bmv Set 22, 24, 26 , Body Double Arm Needle , Bone Wax , Bone Wax , Bone Wax Sterile 2Gm , Bone Wax Sterile Usp , Boric Acid Ear Drops 10Ml Vial , Bosentan 62.5Mgtablets , Boswellin Cg 1.00% W / W Arbutin 0.5 % W / W Licorice Extract 40% Ca 1% W / W Coriander Seed Oil 0.3 % W / W In A Cream Base Tube Of 15 Gmcream , Bougie With Oxygen Port -Adult Size , Bougie With Oxygen Port -Adult Size And Paediatric Size , Bougie With Oxygen Port -Paediatric Size , Bovinebio Prosthetic Heart Valve Mitralshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Bovine Bio Prosthetic Heart Valve Aorticshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size- 19Mm, 21Mm, 23Mm , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 8In X 10In ( 20Cm X 25Cm ) 8In X 10In ( 20Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 2In X 2In ( 5Cm X 5Cm ) 2In X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 4In X 10In ( 10Cm X 25Cm ) 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 4In X 5In ( 10Cm X 12.5Cm ) 4In X 5In ( 10Cm X 12.5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer-Meshed ) Integra Meshed Dermal Regeneration Template ( 4In X 10In ( 10Cm X 25Cm ) 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer2in X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer8in X 10In ( 20Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer 4In X 5In ( 10Cm X 12.5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin2in X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin 4In X 5In ( 10Cm X 12.5Cm ) , Braided Coated Polyester Non Absorbable Suture Usp Size - 2, 44.8Mm, 1 / 2 Circle Tc Heavy, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Rb Sh, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 3 / 0 26Mm, 1 / 2 Circle Rb Sh, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 4 / 0 8Mm, 1 / 4 Circle Spatulated Micro Point, Green 90Cms , Braided Coated Polyester Non Absorbable Suture Usp Size 5 55Mm, 1 / 2 Circle Tc Heavy, 75Cms Green , Braided Long Sheath 6Fx45cm , Braided Long Sheath 6Fx65cm , Braided Long Sheath 7Fx45cm , Braided Long Sheath 7Fx65cm , Braided Polyamide * 0 6X45cm Pre-Cut , Blackmm , Braided Polyamide * 0 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 1 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 12X45cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 7X75cm Pre-Cut , Blackmm , Braided Polyester ( Green / Blue / White ) 75 Cm, 2-0, Ptfe Firm Pledget ( Oval / Square ) 3Mm X 6Mm X 1.5 Mm, 25Mm 1 / 2 Circle Taper Point / Cut Double Arm ( 10 / 8 Sutures Per Foil ) ( Preferably Us Fda Aproved ) , Braided Polyester ( Green / Blue / White ) 75 Cm, 2-0, Ptfe Firm Pledget ( Oval / Square ) 3Mm X 6Mm X 1.5 Mm, 16-17 Mm 1 / 2 Circle Taper Point / Cut Double Arm ( 10 / 8 Sutures Per Foil ) ( Preferably Us Fda Aproved ) , Braided Polyester 2-0 1X30 / 75Cm Da, Oval / Squarepledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm ( Preferably Us Fda Aproved ) , Braided Polyester 2-0 Blue 1X30 / 75Cm Da, Oval Pledget 3X6mm, Soft Pledget, Taper Point, 1 / 2 Circle, 16Mm ( Preferably Us Fda Aproved ) , Braided Polyester 75 Cm 2, 45Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Braided Polyester 75-76 Cm 2-0, 16-17 Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Braided Polyester 90 Cm 2-0, 25Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Breast Tissue Marker 17G. Rigid Needles Dual Trigger With Lifetime Visibility . , Bromelain 90 Mg+Rutoside Trihydrate 100 Mg+Trypsin-Chymotrypsin 50000 Au Tab. , Bromfenac, 5Ml Eye Drop , Bromocriptine 2.5 Mg Tab. , Broviac 2.7Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff With Basic Tray. , Broviac 4.2Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Broviac 6.6Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Bs Oxygen Connector For Ventilator , Bt Set With Luerlock , Budesonide Nasalspray , Budesonide Nebulising Suspension ( 0.5Mg / 2Ml Respule ) -Pack Of 5Respules , Budesonide Respules 0.25Mg / 2Mlrespule , Buprenorphine 0.3 Mg / Ml 1 Injection , Buprenorphine T.D. Patch 1 Mg Td Patch , Buprinorphine Patch 5, 7.5, 10, 15, 20 Micro Gm Per Hr , Buretteinfusion Set , Burs For Craniotome ( Manman ) , Butorphanol 1 Mg 2 Ml Ampoule Injection , Button Switch Pencil With Ptfe Coated Ez Clean Electrosurgical Tip , Button Switch Pencil With Ptfe Coated Modified Ez Clean Electrosurgical Tip , C 1, 2, 3Catheter5 F 90Cmand 65Cm , C ) Triple-Lumen Tip To Prevent Clogging Inside The Applicator , C.T.G. Paper Roll . Roll , Cabergoline 0.25Mg. Tab , Cable Plastic Strap Tie Lock Locked Tie , Caffeine ( 1Ml ) Syp. , Caffeine ( 1Ml ) Vial Inj. , Caffeine ( 2Ml ) Syp. , Caffeine ( 2Ml ) Vialinj. , Caffeine 60 Mg / 3Ml Injection , Calamine 500 Gm Powder , Calcitonin 200 Iu ( Nasal Spray ) , Calcitriol 0.25 Mcg+Elemental Calcium 200 Mg+Elemental Zinc 7.5 Mg+Ibandronic Acid 150 Mg Tab. , Calcitriol 0.25 Mcg+Elemental Calcium 500 Mg+Elemental Magnesium 50 Mg+Elemental Zinc 7.5 Mg+Ibandronic Acid 150 Mg+Vitamin K2-7 50 Mcg Tab. , Calcitriol 0.25 Mcg+Elemental Calcium 500 Mg+Elemental Zinc 20 Mg+Ibandronic Acid 150 Mg Tab. , Calcium 500 Mg + Vit D3 Sup , Calcium Aspartate Anhydrous 560 Mg Eq. To Elemental Calcium 75 Mgcap. , Calcium Carbonate 500 Mg Tab. , Calcium Chlorideinj. , Calcium Citrate 500Mg With Vitamin D3 200Mcg Tablet , Calcium Gluconate 10% 0F 10 Ml Ampoule Injection , Calcium Plolystyrene Sulphonate Powder 15Gm. Powder , Calcium With Vitamin D Tablets Usp Calcium Carbonate 1.25G Eq. To Elemental ( Calcium 500Mg And Cholecalciferol Ip 250 Iu ) , Tablet , Camera Cover , Canister With Gel Contains Isolizer & Filter. Size 500 Ml. Usfda Approved . , Canula Hub Protector Device Integrated With 70% Isopropyl Alcohal. Single Pack Sterilized . , Capamantadine 100Mg. Tab. , Carbamazepine 400Mg Tab. , Carbamizepine ( Standard Size ) Syp. , Carboxy Methyl Cellulose And Lipophillic - Tlc Agdressing, Size 10 Cm X 12 Cm , Carboxy Methyl Cellulose And Lipophillic - Tlc Ag Dressing, Size 15 Cm X 20 Cm , Cardioplegia Adapters - Y Types , Cardioplegia Heat Exchanger ( Bcd ) It Should Have Priming Volume Less Than 50 Ml, Blood Flow Rate Should Be Between 0 To 600 Ml / Min, Filter Pore Should Be Around 100 Um, Inlet Connection Should Be 1 / 4 , Outlet Connection Should Be 3 / 16. Heat Exchange Surface Area Should Be ?.20M 2, Heat Exchange Should Be Of Stainless Steelcorrugated / Convoluted Pipes. Bubble Trap Should Be Integrated For Highly Efficient Debubbling, Exchangeable Water In / Water Out Blood Flow Path Bottom Up It Should Have A Stopcockprime / Perfusion For Easypriming. It Should Have Tip In The Surgeon Pack So That It Can Beconnected To Cardioplegia Cannula. It Should Be Available Both In 4:1 Configurations. , C-Arm Cover , Carnitine 10 Ml Inj. , Cassette ( Blue Sensitivity ) 10 X 12 , Cassette ( Blue Sensitivity ) 12 X 12 , Cassette ( Blue Sensitivity ) 12 X 15 , Cassette ( Blue Sensitivity ) 12 X 6 , Cassette ( Blue Sensitivity ) 14 X 14 , Cassette ( Blue Sensitivity ) 14 X 17 , Cassette ( Blue Sensitivity ) 15 X 6 , Cassette ( Blue Sensitivity ) 6½ X 8½ , Cassette ( Blue Sensitivity ) 8 X 10 , Cassette With Intensifying Screen ( Blue Sensitivity ) 10 X 12 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 12 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 15 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 6 , Cassette With Intensifying Screen ( Blue Sensitivity ) 14 X 14 , Cassette With Intensifying Screen ( Blue Sensitivity ) 14 X 17 , Cassette With Intensifying Screen ( Blue Sensitivity ) 15 X 6 , Cassette With Intensifying Screen ( Blue Sensitivity ) 6½ X 8½ , Cassette With Intensifying Screen ( Blue Sensitivity ) 8 X 10 , Cast Bendage . , Cath Tap , Catheter Mount Expandable , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag ( Large ) . , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag ( Medium ) . , Catheter With Distally Mounted Non Compliant Balloon All Sizes , Cefdinir 1Gam. Inj. , Cefdinir 300 Mgcap. , Cefuroxime 30 Ml Syp. , Cencentrat Acidic Solution For Bicarbonat Dialysis 1.34, 1.83 Proporationing Solution - ( A ) , Sodium Bicarbonate Ip 600Gms. ( B ) , Sodium Chloride Ip Salts 235Gms.- ( C ) ( Abc ) Ffs Bottle 10 Lit.Can Iv , Centesis Drinage Sets , Cerebral & Somatic Oximeter Which Measures Rso2 ( Regional Blood Oxygen Saturation ) In The Brain And Skeletal Muscles ( Somatic ) Tissues Of The Body With The Help Of Nirs ( Near Infra Red Spectroscopy ) Technology. , Cerebral Protection Device , Cervical Ripering Baloon For Mechanical Dilation L-40Cm. Fr.-18, Balloon Capacity 80Ml . , Cetrimide + Choline Salicylate Gel For Oral Ulcer ( 0.01%+8%All / W / V ) 15 Ml 1 Solution , Cetrimide Cream Bp 20Gmointment , Chalk Powder 400Gms , Channel Hangers 10 X 12 , Channel Hangers 12 X 12 , Channel Hangers 12 X 15 , Channel Hangers 12 X 6 , Channel Hangers 14 X 14 , Channel Hangers 14 X 17 , Channel Hangers 15 X 6 , Channel Hangers 6½ X 8½ , Channel Hangers 8 X 10 , Cheprhonguiding Catheter6 Fr. , Chest Bag Size - 20, 24, 28, 32 , Chest Drainage Bottle Under Water Seal Drainage System. Double Chamber Compactunit With 2000 Ml Capacity , Chest Stand , Chibaneedle 21Gwith15 & 20 Cm Long , Chicken Pox Vaccine > 2000 Pfu Inj. , Chloramphenicol 250Mg Cap. , Chloramphenicol Eye Applicaps 1% ( 1X100 ) 1X100 Eye Drop , Chloramphenicol Eye Drops 1%, 5Ml Eye Drop , Chloramphenicol With Ploymyxin B Sulphate, 0.5%+5000Iu+0.5%, 5Ml 0.5%+5000Iu+0.5%5 Ml. Eye Drop , Chloramphenicol, Hydrocortisone 5Gm. Ointment Tube , Chlordipoxide-25Mg. Tab. , Chlorhexidine Gauze Dressing10cm X 10Cm. , Chlorhexidine Gluconate + Metronidazoe 20 Gm Tubeointment , Chlorhexidrine200 Solution , Chlorocol 0.5% Eye Drops , Chlorocresol 0.100%W / W, Clobetasol Propionate 0.050 % W / W, Miconazole Nitrate 2% W / W, Neomycin Sulphate 0.500 % W / W 15Gmointment , Chloroquine Phosphate - 250Mgtab , Chloroquine Phosphate40mg / Ml ( 5 Ml Amp ) Inj. , Chloroquine Phosphate60mg / Ml 3Ml Vial Inj. , Chloroquine Phosphate Suspension Equivalent To Chloroquine 50Mg / 5Ml ( 60 Ml Bottle ) Syp. , Chloroxylehol 4.8 W / V Terpineol 9% Alcohol 1800 Solution , Chlorphenamine 10Mg / Ml Solution For Injection , Chlorphenamine Maleate 100Ml Syp. , Chlorphenamine Maleate Amp / Vial 22.7Mg. Inj. , Chlorpheniramine Maleate Ip, 0.01% W V Eye Drops 5Ml 5Ml Eye Drop , Chlorpromazine 100Mg. Tab. , Chlorpromazine 50Mg. Tab. , Chlorpromazine Ip 25Mg Inj. , Chlorpromazine, 25Mg / Ml, 2Ml Amps Injection , Choline Salicylate Ip 9% W / V, Benzalkonium Chloride Solution Ip 0.02% 10Ml 10Ml Ointment , Chromium 0.4Mg., Copper 0.4Mg., Manganese 0.1Mg., Selenium 0.02Mg. Inj. , Chromostate 2Ml Inj. , Cilostazol 50 Mg Tab. , Cinacalcet 30Mg Tablets , Cinitapride 3Mg Extended Release Tab , Ciprofloxacin Eye Ointment 0.3% ( 3Gm Tube ) Eye Ointment , Citicholine 60Ml Syp. , Clavical Brace With Velcro S / M / L , Click Type Y Connector With Extn. Line Kit , Clindamycin 150 Mg Cap. , Clinical Thermometer. , Clobetasol Propionate 0.05 %W / Vlotion , Clobetasol Propionate 0.05 %W / W+Fusidic Acid 2 %W / Wointment , Clobetasol Propionate Bp 0.05% W / W Salicylic Acid 3.0% 30Gm Ointment , Clobetasol Propionate Bp, 0.05% W / W Gentamicin ( As Gentamicin Sulphate Ip ) 0.1% W / W Chlorocresolip ( As Preservative ) 0.1% W / W20gmointment , Clobetasone 0.05% + Gentamycinointment , Clobetasone 17 Butyrate 0.0005 Ointment , Clobitasol Proprionate 0.5% ( Lobate ) 15Gm Tube Cream , Clofazimine 100Mg. Cap. , Clomiphene Citrate 25 Mg Tab , Clomiphene Citrate 50 Mg Tab. , Clonazepam 2 Mg Inj. , Clonidine 150 Micro Gm / Ml Injection , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Large 26Cmx16cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing - Pu Foam Size Small 10Cmx8cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing - Pu Foam Size Small 18Cmx13cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Suction Drainage System All Size , Closed Suction Systemsystem Should Have Filtration System Along With Rotating Patient Access Valve To Enable Complete Isolation Of The Sleeved Suction Catheter From Patient Airway When Suctioning Is Not Required.System Should Have 03 Micron Hydrophobic Filter For Immediate Visual Identification Of Ch Size And Flushing Port Which Should Swivels 360 Degrees And Should Be Equipped With Built-In Non-Return Valve , Closed System For Hourly Urine Measurement - Closed Urine Measuring System With Graduated Transparent Chamber Starting From 1 Ml To 500Ml Capacity, Consisting Of Fine Measuring Sections With A Capacity And Two Non Return Valve, Collection Chamber. Dual Chambered 120Cm Kink Resistant Tubing, Tapered Connector With Kombicon Needle Free Sampling Port, Flexible Fastening Strap For Easy Hanging. Sterile Individually Packed In Peel Open Pack With 2 L Storage Capacity, , Closed Wound Suction Unit Size 12Fg , Closed Wound Suction Unit Size 14Fg With 800 Ml Chamber , Closed Wound Suction Unit Size 16Fg , Closed Wound Suction Unit Size 18Fg , Clotrimazole ( Vaginal Tab ) 500 Mg ( With Applicator ) , Tablet , Clotrimazole + Beclomethasone Eye Drop, 5Ml Eye Drop , Clotrimazole Ear Drop, 10Mleye Drop , Clotrimazole Vaginali.P. - 100Mg ( With Applicator ) Tab , Cloxacillin 500 Mg Cap , Cmc And Lipophillic - Tlc Colloid Contact Layer, Size 10 Cm X 10 Cm , Cmc And Lipophillic - Tlc Colloid Contact Layer, Size 15 Cm X 20 Cm , Coated, Braided Lactomer 91* 0 90Cm, Violet37mm1 / 2 Circlereverse Cutting , Coated, Braided Lactomer 91* 0 90Cm, Violet40mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 1 90Cm, Violet40mm1 / 2 Circlereverse Cutting , Coated, Braided Lactomer 91* 1 90Cm , Violet40mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 2-0 75Cm, Violet30mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 2-0 90Cm, Violet37mm1 / 2 Circlereverse Cutting , Coaxial Breathing Circuit -- It Should Be 1.8 Meterin Length+ T Piece+ Swivel Elbow Withleur Port And Cap + One 50 Cm Collapsible Circuit Adult , Codan Iv Drip Set , Codeine Phosphate 10 Mg+Triprolidine 1.25 Mg / 5Ml 100Ml Syp. , Codman Scalp Clip Forceps . , Coils For Embolization 35-5-5 / 35-5-6 / 35-5-7 , Colchicine 0.6 Mg Tablets , Collegin Dressing 2X2 & 4X4 , Colobag25 X 14Cm. , Colostomybag All Size , Colostomy Kit , Compact Portable Bedside Pulse Oximeter For Continuous Monitoring Of Spo2, Pulse Rate & Signal Strength , Complete Absorbable Mesh Fixation Device With Minimum Strap Length 7.0 Mm2 Point Fixation To Hold The Mesh And Device. 25 Absorbable Straps , Conectors For Cp Bypass 1 / 2X 1 / 2 X1 / 2 - ( Y Connector ) , Conectors For Cp Bypass 1 / 2X1 / 2 ( Single Connector ) , Conectors For Cp Bypass 1 / 2X3 / 8 ( Single Connector ) , Conectors For Cp Bypass 1 / 2X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass 1 / 4X Male Connector , Conectors For Cp Bypass 1 / 4X1 / 4 Luer Lock , Conectors For Cp Bypass 1 / 4X1 / 4 ( Single Connector ) , Conectors For Cp Bypass 1 / 4X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X1 / 4 ( Single Connector ) , Conectors For Cp Bypass 3 / 8X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8 ( Single Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8 Luer Lock , Conectors For Cp Bypass 3 / 8X3 / 8X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass1 / 2X1 / 2 ( Single Connector ) , Conectors For Cp Bypass1 / 2X3 / 8 ( Single Connector ) , Conectors For Cp Bypass1 / 2X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass1 / 4X Male Connector , Conectors For Cp Bypass1 / 4X1 / 4 Luer Lock , Conectors For Cp Bypass1 / 4X1 / 4 ( Single Connector ) , Conectors For Cp Bypass1 / 4X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X1 / 4 ( Single Connector ) , Conectors For Cp Bypass3 / 8X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X3 / 8 ( Single Connector ) , Conectors For Cp Bypass3 / 8X3 / 8 Luer Lock , Conectors For Cp Bypass3 / 8X3 / 8X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X3 / 8X3 / 8 ( Y Connector ) , Connector Y&W , Multi , Connector 1 / 2X1 / 2X1 / 2Y Type Connectors , Conquest 40 High Pressure Balloon Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cmdiameter ( 5Mm To 12Mm ) & Lengths ( 2, 4, 6, Cm ) . , Conquest Pro 12 , Conquest Pro 9.0 , Container Contains Isolizer To Convert Liquid Into Gel And Filter For Moisture Trap And Odour , Control Syringe 12Ml Rotate Luer , Control Syringe 20Ml Rotate Luer , Controle Syringe 20, 12Ml , Controller Should Be Indicated For Use : Deep Vein Thrombosis And Pulmonary, Embolism Prophylaxis.Controller Should Have Graphic User Interface Of 3.2-Inch Color Lcd & Provide Greater Visibility, Should Have Venous Refill Detection Technology For Superior Emptying Of Veins, Personalize Decompression Cycles For Individual Patients, Should Have Different Compression Level At All The Points ( Ankle, Calf And Thigh ) , Consumables Sleeves Should Have Three Bladders For Giving Optimal, Compression In Different Areas Of The Leg , Convective Patient Warming System For Delivering Warm Air Uniformly To The Patients Through Disposable Blankets , Copper Pipe 12Mm ( Per Meter ) , Copper Pipe 15Mm ( Per Meter ) , Copper Pipe 22Mm ( Per Meter ) , Corbolic Acid 400Gms Powder , Cord Clamp. , Coronary Balloons Abott Complete Sizes Sequencenc , Coronary Balloonsabott Complete Sizes Sequence Sc , Coronary Balloons Otwabott Complete Sizes Sequence , Coronary Dilators , Coronary Snare For Retrieval Of Intravascular Foreign Objects Neurovascular Snare For Retrieval Of Intravascular Foreign Objects Nitinol Shaft With Snare Catheter, Introducer & Torquedevice.Should Be Dcgi And Usfda Approved , Coronary Snare For Retrieval Of Intravascular Foreign Objectsneurovascular Snare For Retrieval Of Intravascular Foreign Objects Nitinol Shaft With Snare Catheter, Introducer & Torquedevice.Should Be Dcgi And Usfda Approved , Corrugated Drainage Sheet Pvc Disposable , Cotrimaxazole Ds 160Mg Tablets , Cotrimaxazole Ds 800Mg Tablets , Cotton Crape Bandage 10Cm X 4M ( Box Of 10 Bandages ) , Craniotome Cutter , Craniotomy Drape Sheet Size 1.6X3.2M. Adhesive Area 20Cm Dia 2 Pockets 15X18cm. 2 Tube And Cable Holders Side Channels And Collecting Funnel Side Channels And Collecting Funnel. Poly Sheet Lining 1.20Cm.X120.M. . , Crape Bandage 2 4 Mt . , Crape Bandage 4 4 Mt. . , Crape Bandage 6 4Mt. . , Cre Balloon 12Mm, 13.5Mm, 15Mm Each , Cross Over Sheath , Crtd Device+ Leads ( Fda Approved Not Ce Approved ) , Crtp Device+ Leads ( Fda Approved Not Ce Approved ) , Crystallineinsulin40 Inj. , Cse Kit- Pencil Point Spinal Needle - 115Mm, Locking Needle Hub, 10Ml Lor Syringe, Flat Filter, Hydrophilic Supported Membrance. . , Curved Blade Having Shaft Diameter 3 Cm & Shaft Leghth 4-9 Cmwith Integrated Hand Activation Control Buttons.Compatible With Gen 11 , Curved Cartridge Having Close Staple Height Of 1.5 Mm ( Blue ) , 2.0 Mm ( Green ) Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Curved Cutter Curved Cutter Closed Staple Height 2.00Mm , Curved Cutter Reloadcurved Cutter Reload Closed Staple Height 2.00Mm , Curved Cutter Stapler Delivering Curvelinear 4 Rows Of Staple And 40 Mm Cut Line In 30Mm Width Having Tissue Retaining Pin, Intermediate Locking Position , Customisedtubing Pack With ( Pediatric ) Design P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Silicon Headsuction / Gas Line 1 / 4 , Customised Tubing Pack With [ Adult ] Designp.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction Silicon / Gas Line 1 / 4 , Customised Tubing Pack With Arterial Filter ( Pediatric ) P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction / Gas Line 1 / 4 , Customised Tubing Pack With Arterial Filter [ Adult ] P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction / Gas Line 1 / 4 , Cutting Burr 4Mm , Cutting Loop, Bipolar, 24 / 26 Fr, For Use With Hopkins Telescope 27005 Fa / Ba, , Cutting Loops ( Single Stem ) Monopolar, For 26Fr Tur , Cvp Manometer , Cyanoacrylate Glue Ection Therapy ( For Oesophageal And Gastric Varices ) , Inj. , Cyanocobalamin 400Mcg + Folic Acid 1Mg + Pyridoxine 10Mg Tablets , Cyanocobalamin 500 Mcg+Folic Acid 15 Mg+Niacinamide 200 Mg - ( Vitcofol 10Ml Inj. ) , Cyclobenzerpine 15 Mg Tab. , Cyclophosphamide 50 Mg Tab , Cytology Brush , Dabigatran100 Mg Tab. , Dabigatran 110Mg Capsule , Dabigatran 150Mg Tab. , Dacron Marking Patch ( Filamentous Fabric ) Should Be Nominal Thickness; Around 0.6 Mm, Water Permeability Approximately 1800Ml, Popularly Known AsMarking Patch.Sizes - ( 2 X2 ) , ( 4X4 ) , ( 6X 6 ) , Dacron Marking Patch ( Filamentous Fabric ) Should Be Nominal Thickness; Around 0.6 Mm, Water Permeability Approximately 1800Ml, Popularly Known AsMarking Patch.Sizes - ( 2 X2 ) , ( 4X4 ) , ( 6X 6 ) , Dafflon ( Micronized Flavonoid Fraction 1000 Mg ) Tab. , Dafflon ( Micronized Flavonoid Fraction 500 Mg ) Tab. , Dalela Female Self Urethral Dilator , Dalela Triple J Stent , Danazol50 Mg Cap. , Dark Room Tank ( 22.5 Lit. ) , Datascopeintra Aortic Balloon 35Cc , Datascopeintra Aortic Balloon 40Cc , Daunorubicin 50 Mg / Vial Vial , Daunorubicin ( 20 Mg / Vial ) , Injection , Deferasirox Dispersible 100Mg Tab. , Deferasirox Dispersible 250Mg Tab. , Deferasirox Dispersible 500Mg Tab. , Deflazacort 12 Mg Tab. , Deflazacort 18 Mg Tab. , Deflux - E- Needle Inj. , Deionized Water 5 Liter 1 Solution , Denali Ivc Filter Optional Ivc Filter With One Piece Nitinol Body, Electropolished Conical Shaped Designwith Dual Level Filtration Having Both Caudal And Cranial Migration Resistant With Anchors Benefit With Highly Visible Snare Tip Seamlessly Welded To The Body For Easy Filter Retrieval Even After Long In-Dwell Times. Gives You Both Femoral And Jugular Approachesfemoral & Juglar , Depo-Provera 150Mg / Ml Ection Inj. , Desferrioxamine 500Mg. Inj. , Desmopressin Acetate Nasal Spray 0.1 Mg / Ml 5 Ml Vial , Desmopressin Inj. , Desmopressin Tab. , Dexamethasone ( 4 Mg ) , Tablet , Dexamethasone 0.1%+ Polyimexin+Chloromphenical 1% 0.1%+1%5 Ml. Eye Drop , Dexamethasone Acetate 0.1 %Ointment , Dexmedetomidine 50 Mcg / 0.5 Mlampoule Injection , Dexrabeprazole Sodium 10Mg Tab. , Dextran70 % Ffs Bottle 500 Ml Iv , Dextran 10 % Dextrose 5 % Nacl 0.9 % Ffs Bottle 500 Ml Iv , Dextromethorphan 10Mg / 5Ml Syrup ( 60Ml Bottle ) Syp. , Dextromethorphan Hydrobromide Ip 10Mg + Chlorpheniramine Maleate Ip 2Mg + Phenylephrine Hydrochloride Ip 5Mg Sugar Free And In Mouth Dissolving Form Tab. , Dextromethorphan Hydrobromide Syrup 13.5 Mg / 5Ml ( 30 Ml Bottle ) Syp , Dextromethorphane Hydrobromide Phenylephrine Hcl Softgel Cap , Dextrose 200 Gm Powder , Dextrose 50% Ffs Bottle 25Ml Iv. , Dextrose 500 Gm Powder , Diagnostic Catheter Sim 1 , Diagnostic Catheter Sim 1 , Diagnostic Catheter Sim2 , Diagnostic Catheter Sim2 , Diagnostic Catheter Vertebral , Diagnostic Catheter Vertebral , Diagnostic Catheterc2 , Diagnostic Catheterc2 , Dialysis Starting Kit Disposable :A Sterile Tray With Top , Dialyzer 1.6- Multiple Use , Diamond Burr 15 Cm X 4 Mm , Diamond Drill Bits Cutting 4 Mm, 6Mm, 8Mm For Asceulaphand Drill , Diazepam ( 5 Mg ) , Tablet , Diclofenac Sodium 0.1, %5 Ml. Eye Drop , Diclofenac Sodium Mouth Garglesolution , Diclofenac Suppository 12.5Mg Suppository , Diclofenac Suppository 25Mg Suppository , Diclofenac Suppository 50Mg Suppository , Dicyclomine- 10Mgtab , Diethylcarbamazine- 100Mg Tab. , Difluprednate5ml Eye Drop , Difluprednate 0.5 Mg+ Moxifloxacin 5Mg 5Ml Eye Drop , Digital X-Ray Cassetts10 X 12 , Digital X-Ray Cassetts14 X 17 , Digital X-Ray Cassetts8 X 10 , Digital X-Ray Cr Machine Films Fuzi Machine ( 8X10, 14X17, 11X14 ) , Digital X-Ray Cr Machine Films Kodak Machine ( 8X10, 14X17, 10X12 ) , Digital X-Ray Dr Machine Films Konika Machine ( 8X10, 14X17, 10X12 ) , Digital X-Ray Filmsize 8 X 10 ( 150 Film Per Pack ) , Digital X-Ray Film ( Make- Fuji ) Size 11X14 , Digital X-Ray Film ( Make- Fuji ) Size 14X17 , Digital X-Ray Film ( Make- Fuji ) Size 8X10 , Digital X-Ray Film ( Make- Kodak ) Size 11X14 , Digital X-Ray Film ( Make- Kodak ) Size 14X17 , Digital X-Ray Film ( Make- Kodak ) Size 8X10 , Digital X-Ray Film ( Make- Konika ) Size 11X14 , Digital X-Ray Film ( Make- Konika ) Size 14X17 , Digital X-Ray Film ( Make- Konika ) Size 8X10 , Digoxin 250Mcg ( 0.25Mg. ) / Ml ( 2Ml Amp ) , Injection , Digoxin I.P. 500Mcg, ( 0.5Mg ) / 2Ml Inj. , Digoxin Syp 30Ml Syp. , Diltiazem 2% W / W In Organogel Basegel , Diltiazem 25 Mg / 5Ml Vial Injection , Diltiazem 5Mg / 1Ml ( 5 Ml ) , Injection , Dimethyl Fumarate 240Mg. Tab. , Dinoprostone Gel 5%Gel , Diosmin 500Mg Tab. , Diphenhydramine + Ammonium Chloride + Sodium Citrate Cough Syrup 60Ml , Diphenhydramine 25Mg. Tab. , Diphenhydramine Syrup ( 12.5Mg / 5Ml ( 100 Ml Bottle ) ) , Syrup , Diphtheria Antitoxin 10000 Iu ( 10Ml Vial ) Inj. , Dispersible Zinc 20Mg Tab. , Disposablesteriledual Drape Sheath { 140*210Cms } Integrated With High Absorbent Capacity Fabric Sheath With Absorption Area 24*27 And C Shape Incision Window ( 6 ) , Self Adherent Adhesive, Iso / Ce Certified . , Disposable Amniotic Fluid Collection Spillage Free Sac. , Disposable Bilayered Leak Proof Sheet 23.5X35.4 With Absorbent Surface . , Disposable Breathing Circuit ( Ventilator Circuit ) Adultsize , Disposable Breathing Circuit ( Ventilator Circuit ) Paediatricsize , Disposable Closed System A.F.C. Pouch, Embossed Leak Proof, Eto Sterile. Ce Certified . , Disposable Electrosurgical Control Pencil , Disposable Endoscopic Cutting And Stapling Devices 45 Mm 45 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jaw Opening And 8 Mm Proximal, Shaft Length Of 340Mm. , Disposable Endoscopic Cutting And Stapling Devices 60Mm 60 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator, 22Mm Distal Jaw Opening And 8 Mm Proximal, With Single Handed Articulation Shaft Length Of 280, 340Mm & 440 Mm. , Disposable Eye Shield Protectoragainst U / V Light For Infant And Neonates , Steriloized, Single Pack . , Disposable Gynaec Dressing Kit, Ce Certified . , Disposable High Absorbent Lscs Drape Sheath With Self Adherent Incisional Window , Disposable Hiv Pack, 1 Kit , Disposable Insuline Syringe . , Disposable Intraluminal Stapler 19 To 25 Mm Curved Circular Stapler 19 To 25 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses. It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 25 To 29 Mm Curved Circular Stapler 25 To 29 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses. It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 29 To 33 Mm Curved Circular Stapler 29 To 33 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 33 Mm Curved Circular Stapler 33 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Linear Cutter- 55Mm Linear Cutterof 55 Mm With Inbuilt Selectable Staple Height. , Disposable Linear Cutter- 75Mm Linear Cutterof 75 Mm With Inbuilt Selectable Staple Height. , Disposable Linear Cutter Reloads- 55Mmuniversal Black Reload Compatible With The 55Mm Linear Cutter With Inbuilt Selectable Staple Height. , Disposable Linear Cutter Reloads - 75Mmuniversal Black Reload Compatible With The 75Mm Linear Cutter With Inbuilt Selectable Staple Height. , Disposable Linear Stapler 30Mmlinear Stapler 30 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler 60 Mm Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler 90 Mmlinear Stapler 90 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 30 Mm Reload For Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 60 Mm Reload Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 90 Mm Reload Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Disposable Liner Cutter 55 Mm Disposable Liner Cutter 55Mm , Disposable Liner Cutter 75 Mm Disposable Liner Cutter 75 Mm , Disposable Multifire Cliip Applier Long Size-15 Clips , Disposable Multifire Cliip Applier Long Size-15 Clips , Disposable Multifire Clip Applier Small Size 20 Clip , Disposable Multifire Clip Applier Small Size 20 Clip , Disposable Needles , Disposable Needles - 18G. , Disposable Needles - 20G. , Disposable Needles - 22G. , Disposable Needles - 23G. , Disposable Needles - 26G. , Disposable Needles 14 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 16 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 18 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 21 Gneedle ( 11 / 2 Inch ) , Disposable Needles 24 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 26 Gneedle ( 1 Inch ) , Disposable Paper Gloves Size 7 Inches Consumable , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 100 Kgs. , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 125 Kgs. , Disposable Patient Wrap With An A.F. Drain Bag With Measuring Device For The Assessment Of Blood Loss. Iso / Ce Certified . , Disposable Pcnl Drapes Kit; Size: 150 X 275 Cms, Adhesive Area : 20 Cms X 25Cms , Disposable Plastic Aprons ( Specs As Per Pollution Control Board ) , Disposable Plastic Aprons ( Specs As Per Pollution Control Board ) , Above 40 Microns Sterile , Disposable Plastic Leggings , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 1.5Mm ) Endoscopic Cutting And Stapling Devices 45Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of1.5Mm And Open Staple Leg Length Of 3.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 1.8Mm ) Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 2.0Mm ) Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - 1Mm Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 1.5Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.5Mm And Open Staple Leg Length Of 3.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 1.8Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 2.0Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - 1Mm Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Disposable Reloads For Reusable Linear Cutter-55 Knife Blade Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Disposable Reloads For Reusable Linear Cutter-55 No Knife Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Disposable Reloads For Reusable Linear Cutter-55 Reloads For Re-Usable Linear Cutter 55 Mm With Closed Staple Height Of 1.5 Mm & 2 Mm , Disposable Scalp Vein Set Size 20 No , Disposable Scalp Vein Set Size 22 No ( Each ) , Consumable , Disposable Spinal Needle 22 No , Disposable Spinal Needle 23 No , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6 Inch / Pair , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6.5 Inch / Pair, Consumable , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized 7 Inch / Pair , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized7 Inch / Pair , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized ( 7.5 Inch / Pair ) , Consumable , Disposable Suction Cather Size 12, . , Disposable Suction Catheter Assorted Covering All Sizes 10, 12, 14, 16, 18Consumable , Disposable Suction Catheter Size 14 . , Disposable Surgen Cap ( 100 Pcs Packet ) , Disposable Syringe ( For Vitamin K Inj ) ( 1Ml With Needle 26G ) , Consumable , Disposable Syringe With Needle - 10Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 20Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 2Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 3Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 50Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 5Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Three Layer Face Mask ( 100 Pcs Packet ) , Disposable Tuberculin Syringe. 1Ml , Dissecting Hook Having Shaft Diameter 3Cm & Shaft Length 4-9 Cm .Compatible With Gen 11 , Distal Embolic Protection Device , Dj Stent Removal Forceps, 4, 5 Fr, , Doc Extension145 / 165 Cm , Domperidone + Ranitidine 10Mg+150Mg Tab , Dormia Basket , Double J Stent; 3Fr, 18Cm, One End Open , Double J Stent; 4Fr, 18Cm, One End Open , Double J Stent; 5Fr, 22Cm, One End Open , Double Lumen Catheter Full Set With Rolleson Syringe. , Double Lumen Endobronchial Tubewith Ezee One Side Blockerno- 35, 37, 39, 40 ( Right Side ) , Double Lumen Endobronchial Tube With Ezee One Side Blocker No- 35, 37, 39, 40 ( Left Side ) , Double Lumen Hemo Dialysis Catheter Kit 15 Fr - 19Cm / 23Cm / 25Cm / 28Cm / 33Cm , Double Lumen Low Pressure Tracheal And Bronchial Cuffs Tubes For Minimising The Risk Of Mucosal Damage , Double Lumen Tube 33F , Double Lumen Tube 35F , Double Lumen Tube 37F , Double Lumen Tube 39F , Drain Under Water Seal Drainage System - 1000Ml , Dressing Tray , Dried Lvyleaf Extract 0.7Gm S - 100 Ml Syp. , Drill Bittool 15Ba30 Legend 15Cm 3Mm Ball , Drill Bittool 15Ba40 Legend 15Cm 4Mm Ba Compatible With Drill , Drill Bittool T15mg25 Legend 15Cm 2.5Mm Mh Compatible With Drill , Drill Bittool T15mh30d Legend 15Cm 3Mm Diam Compatible With Drill , Drill Bittool15ba20d Legend 15Cm 2Mm Ba Diam Compatible With Drill , Drill Bits Cutting 4 Mm, 6Mm, 8Mm For Asceulap Hand Drill , Drop Evion ( Standard Size ) , Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time. Size- 035 With 120Cm Shaft: Diameter 4Mm -6Mm , Lengthupto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm / 014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Drugs Affecting Hr , Dry Laser Films 125Sh 10X12cm Dvb , Dual ( Parietal And Visceral Sides ) Composite Mesh Made Of Polyesterand Absorbable Collagen Film For Laparoscopic Hernia Repair Surgery With Size Of 15X15 Cm, Us Fda Approved , Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushability. Size-Diameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm , Dulcolaxsuppository 10 Mg Bisacodyl -16 Per Pack , Duraflex T Stent ( Tumorstent ) , Duraform / The Dural Graft Substitute Should Be Onlay With One Side Rough For Better Handling During Surgery, Should Be Of Absorbable Collagen Material. On Wetting In Saline, Should Not Shrink And Should Be Capable Of Being Used Sutureless. The Dural Graft Substitute Should Be Fda / Ce Approvedsize -3X3 . , Duraform / The Dural Graft Substitute Should Be Onlay With One Side Rough For Better Handling During Surgery, Should Be Of Absorbable Collagen Material. On Wetting In Saline, Should Not Shrink And Should Be Capable Of Being Used Sutureless. The Dural Graft Substitute Should Be Fda / Ce Approvedsize -4X 5 . , Durapore Surgical Tape Plaster 2.5Cm X9.1 Meter , Durasil Stent , Duropotch10x12 , Duropotch8x10 , Dusting Powder, 10 Gm ( Neomycin Sulphate 5 Mg, Baccitracin 250 Unit, Sulphacetamide Sodium 60 Mg ) , Dynaplast 15Cm X 4.5Meter , Dynaplast Plaster 10 Cmx 4.5 Meter , E Ptfe Stretch Re-In Forced Removable Ringed Thin Wall Vascular Graftsize: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length , E Ptfe Stretch Re-In Forced Removable Ringed Thin Wallvascular Graft Size: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length , E ) Maintains Fibronectin / Fibrinogen Ratio Within Physiologic Ranges , E.C.G.Roll Three Chanel . , E.C.G.Roll Two Chenal. , Each Pre-Filled Syringe Contains 44 Micrograms ( 12 Miu ) Of Interferon Beta-1A In 0.5 Ml Solution.Other Ingredients : Benzyl Alcohol, D-Mannitol, L-Methionine, Poloxamer 188 And 0.01 M Sodium Acetatebuffer Ph 4.2 , Easy To Carry Power Source To Attach 3 Silicon Ring Mounted Illumination Consumable.With Three Switch Assembly For Each Silicon Ring.Robust Design Rectangle 3Kg Medical Devices. , Eberconazole 10Mg + Methylparaben Ip 0.25% W / W Cream Of 10 Gm Tube , Eberconazole Nitrate Equivalent To Eberconazole - 1.0% W / W Mometasoe Furoate Ip 0.1% W / W In A Cream Base Preservative Methylparaben Ip 0.25% W / W Cream Of 10 Gm Cream , Eberconazole+Mometasoneointment , Ecg Cable 10 Lead , Ecg Electrodes As Perdrugs Act. , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Mri Compatible Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag / Agcl Sensor. Adultfda / Ce Approved Adult, , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Mri Compatible Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag / Agcl Sensor. Adultfda / Ce Approved Paediatric , Ecg Gel 250 Gm / Bottle 250 Gm , Ecg Paper Computerizesd Triple Channel 20M , Ecg Paper Roll 80Mm X 20Cm , Ecg Paper ( Chemical Coated ) 50Mm X 20Mm Roll. , Ecg Paper ( Wax Coated ) 50Mm X 30 Mtr, Roll. , Ecg Plastic And Silicone Ecg Clamp And Chest Electrodes , Echo Jelly 20Ml Bottle , Ecosprin 150Mgtablets , Edaravone 1.5Mg / Ml, 20Ml Amp.Inj. , Elastic Adeshiv Bandage10cm. X 4 / 6 M. , Elastic Knee Support With Hinges . , Electro Surgical Cautery Lead , Electrocorticography Connecting Cabie4 Contact , Electrocorticography Grid 4 X 5 Inch , Electrocorticography Grid I X 4 Inch , Electrosurgical Patient Plate , Elemental Calcium 150 Mgcap. , Elemental Calcium 225 Mg+Ibandronic Acid 150 Mg+Vitamin D3 800 Iu Tab. , Elemental Iron ( 50 Mg / 5 Ml 150 Ml Bottle ) , Syrup , Embolic Protection Device Carotid 3 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 3 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 - 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 4 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 4 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 5 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 5 Mm Affixed To A 0.014 Sta Inless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Ofsr.No 1 -10 Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 6 Mm With Variable Wire Distalembolicprotectiondevicewithnitinolmeshofsize6 Mm Affixed To A 0.014 Stainless Steel Guidewirecompatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 7 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 7 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Enalapril 1.25 Mg Inj. , Endo Applicator- Matt Finishing Stainless Steel Applier, With Us Fda Approved Sizes- A- 32.5Cmfor Ml / L / Xl, B- 45Cm For Ml / L / Xl , Endobronchial Blocker Arndt Endobronchial Blocker , Endobronchial Blocker Cohen Endobronchial Blocker , Endobronchial Blocker Ez-Blocker Endobronchial Blocker , Endobronchial Tubes: The Endobronchial Tube Made Of Highly Flexible And Thermoplastic Materials With Excellent I.O. To O.D. Ratio As Well As The Continuous X-Ray Markers And Special X-Ray Indicators In The Cuff Area. Available In Extensive Range Of Sizes Starting From Smallest Available I.E. 26Fr. The Complete Set Contains Tube With Suction Catheter, Angled Connectors, Y- Connectors. No Latex Contents. Usfda Approved , Endocryl , Endopath Basx Bladeless 12Mm Trocar, Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Seal, Integrated Universal Seal, 100Mm Length. , Endopath Basx Bladeless 5Mm Trocar, Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Seal, Integrated Universal Seal, 100Mm Length. , Endopyelotomy Stent , Endoscope Mask Forpainless Gastroscopy And Fiberoptic Bronchoscopy For Continuous Ventilation, Should Havebite Block, Should Have Sealing Valve For Sealability Of The Mask.Allow Fiberoptic Bronchoscopy Through Nasal Cavity When Upper Airway Obstruction Occurs, Size-3, 4, 5. , Endoscopic Disposable Medium Large Clip Applicator 5Mm 1. It Should Go Through A 5Mm Port. 2. It Should Have A 8.8Mm Closed Clip Length.And The Jaws Should Be 8.4Mm Length. 3.It Hould Have 15 Titanium Clips With Lateral And Transverse Groove. 4. It Should Have Secure Clip For Confident Ligation. 5. It Should Have Long Thin Angled Jaws Which Provides Outstanding Access And Visibility.And Have A Lind Of Demarcation 6. It Should Have A 33Cm Long Shaft For Additional Reach. 7. It Should Have A Antibackup Ratchet Mechanism Which Provides Control Over Placement Closure. 8.It Should Have A Low Clip Indicator And A Last Clip Lockout , Endoscopic Evl Bands .Multiband Barrel , Endoscopic Foreign Body Forceps - Rotatable , Endoscopic Guidwire . , Endoscopic Linear Cutter Cartridge Having 35Mm Staple Line, 30 Mm Cut Line, Having Closed Staple Height Of 1 Mm And 4 Rows Of Staple Line , Endoscopic Linear Cutter Catridge With Reload Surface Having Pocket Extensions, 6 Rows Of Staples With Asymetric Bent Tip And Option Of Closed Staple Height Of 1 Mm ( White ) , 1.5Mm ( Blue ) , 1.8Mm ( Gold ) , 2Mm ( Green ) , Endoscopic Multi Band Shooter , Endoscopic Sclerotherapy Needle Upper Gi Endoscopy , Endoscopic Sphincterotome , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Large Size Clips , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Medium Size Clips , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Medium / Large Size Clips , Endoscopy Biopsy Forceps , Endoscopy Sclerotherapy Needle Lower Gi Endoscopy 21 G & 23 G Each , Endotoxin Iv Bacterial Filter With 0.22 Um Polyether Sulphone Material And Can Prevent Air Embolism. . , Endotracheal Tube - Cuffedno 4.5 Mm Internal Diameter , Endotracheal Tube - Cuffedno. 4.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.5.0 Mm Internal Diameter , Endotracheal Tube - Cuffedno.5.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.6.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.6.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.7.0 Mm Internal Diameter , Endotracheal Tube - Cuffedno.7.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.8.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.8.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.9.0 Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 2.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 3.0 Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 3.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 4.0Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 4.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 5.0Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 5.5Mm Internal Diameter , Endotracheal Tube- The Endotracheal Tube Made Of Ruschelit™ Pvc Technology With Right Degree Of Stiffness I.E. Thermo Sensitive, Flexibility, And Kink Resistance. Comply With Astm Standard Requirements And Are Marked Withf29 Notation. Tubes Feature An Outstanding I.D. To O.D. Ratio. Available In A Full Range Of Paediatric And Adult Sizes Starting From 2.5Mm In Cuffed & 2Mm In Uncuffed. No Latex Contents. Usfda Approved , Endotracheal Tubes Size 7 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue , Endotracheal Tubes Size 8.5 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue , Entacapone , Enteral Feeding Devise-Should Have Both Feed And Flush Options With Mistic Technology, Should Be Able To Set Feed And Flush Rates Up To 24Hrs, And It Should Have Compatibility For Both Intermittent And Bolus Feed, Should Be Compact And Easy To Use, Feeding Bags Should Of 1000M, Feeding Bags Should Be Dehp Free, , Envoyguiding Catheter6 Fr. , Ephedrine 10Ml 0.75%, 10 Ml Nasal Drop , Epidural Anesthesia Kit- 16G. Catheter, Filter, Tuohy Needle, Lor Syringeswith Fixationspad. . , Epidural Anesthesia Kit- 18G.Catheter, Filter, Tuohy Needle, Lor Syringes Withfixationspad. . , Epidural Needle ( Tuohy Needle Of 80Mm Length And 10Mm Graduations With Internal Stylet And Optional Snap On Wings ) . , Epinephrine Hydrochiloride . 1Mg / Ml Inj. , Ercp Accerssories ( Bloon / Sphinterotome ) . , Erythromycin 0.02 Ointment , Erythromycin 250Mg. Tab. , Erythromycin 30Ml ( 100 Mg. / 5 Ml. ) Syp. , Erythromycin 500Mg. Tab. , Erythropoietin10000 Units / Ml Inj. , Erythropoietin2000 Units / Ml Inj. , Erythropoietin3000 Units / Ml Inj. , Erythropoietin4000 Units / Ml Inj. , Esophageal Stent . , Esophageal Stent 20 Mm, Length 10Cm , Esophageal Stent 20 Mm, Length 12Cm , Est Needle 21G . , Est Needle 23G . , Esterified Fatty Acid Complex Gel , Ethanol 85% With Emoilients 475 Ml Solution , Ethiodized Oil Injection , Ethyl Glycerin Ear Drops 1 Eye Drop , Etiophylline ( 77 Mg ) + Theophylline ( 23 Mg ) Tab. , Etiophylline + Theophylline Pead ( 46.5+14Mg / 5Ml ) 100Ml Syp. , Etodolac 400 Mg+Paracetamol 325 Mg Tab. , Etodolac 400 Mg+Paracetamol 500 Mg Tab. , Etodolac 400 Mg+Thiocolchicoside 4 Mg Tab. , Etodolac 400 Mg+Thiocolchicoside 8 Mg Tab. , Etodolac 400Mg+Paracetamol 500Mg+Serratiopeptidase 15 Mg Tab. , Etophylline 231Mg. + Theophyllin 69Mg.Sr 300 Mg Tab. , Etoposide 50Mgcapsule , Etoricoxib 120Mg Tab. , Etoricoxib 60 Mg+Thiocolchicoside 4 Mg Tab. , Etoricoxib 60 Mg+Thiocolchicoside 8 Mg Tab. , Etoricoxib 60Mg Tab. , Euphorbia Prostrate 10 Mg +Lidocaine 30 Mg Cream Basecream , Evd Catheters / The External Ventricular Drainage Catheter Should Be Impregnated With Rifampicin And Clindamycin. The Catheters Should Be Soft, Flexible. The Catheters Should Have 20 Large Holes 0.46Mm Dia And 20 Small Holes 0.23Mm Diaandtotal Drainage Area Of 4.15Mm Square To Facilitate Drainage Of Csf, Blood & Proteins. The Catheter Should Have Tantalum Tip And Depth Makers For X-Ray Visualization.It Should Be Fda / Ce Approved . , Evd- Venticular External Drainage System Contains One Bag. One 30Cm. Ventricular Catheter With Stylet Connecter, Trocar, Catheter Anchoring Collar And Connecting Tube. . , Evoh ( Ethylene Vinyl Alcohol ) Copolymer Dissolved In Dmso ( Dimethyl Sulfoxide ) , And Suspended Micronized Tantalum Powder , Expandable Anaesthesia Circuits With Maximum Lenghth Of 1.8 Meter. +1 Pc X Y-Piece Connector +1 Pc X Swivel Elbow With Leur Port And Cap +2 Pc End Connector , 22F Adult , Expandable Anaesthesia Circuits With Maximum Lenghth Of 1.8 Meter. +1 Pc X Y-Piece Connector +1 Pc X Swivel Elbow With Leur Port And Cap +2 Pc End Connector , 22F Paediatric , Extension Line With Male Luer Lock And3-Way Stop Cock . , Extension Line With Two Female Luer Lock Length- 15Cm , Extention For Breathing Circuit ( Catheter Mount ) 15Cm , Externalpigtaildrainagecatheter8 F And 9Fand 45 Cm , External Ventricular Drainage System , External Ventricular Drainage System , Extra Large Acetyl Polymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Extranal Diameter 34Mm, 3Rows, Closed Stapel Hight 0.75Mm, Houshing Capacity 14Cc. , Extranal Diameter 36Mm, 3Rows, Closed Stapel Hight 0.75Mm, Houshing Capacity 14Cc. , Eye Drape With Drain Pouch Size - 100X75cm Adhesive 7X9 Cm. . , Eye Dress With Eye Pad . , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 3Mm Diamond Burr , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 4Mm Cutting Burr , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 4Mm Diamond Burr , F2 / 8Ta23 Dissecting Tool Midas Rex. Drill 2Mm Cutting Burr , F2 / 8Ta23 Dissecting Tool Midas Rex. Drill 2Mm Diamond Burr , Face Shield For Covid 19 As Per Who Guidelines , Facial Dilators Set, Teflon Make ( For Pcn ) Each Pack Consisting Of Dailator Size 6, 8, 10, 12, 14, 16Fr - 1 Each , Fallopiantuberecanalizationset. , Faramycetine 20 Gmointment , Faramycetine 250Gointment , Faropenem 300Mg.Tabtab. , Fax Paper Roll . , Feeding Tube 10. , Feeding Tube 6, . , Feeding Tube 7, . , Feeding Tube 8, . , Feeding Tube 9, . , Femoral Cathetor Double Lumen Kit Curved , Femoral Puncture Needle 18G , Femoral Sheath 10Fx11cm , Femoral Sheath 5F , Femoral Sheath 5F , Femoral Sheath 5Fx11cm , Femoral Sheath 6Fx11cm , Femoral Sheath 7Fx11cm , Femoral Sheath 8F , Femoral Sheath 8F , Femoral Sheath 8Fx11cm , Femoral Sheath 9Fx11cm , Fentanyl 100 Microgran ( 2 Ml ) Inj. , Feracrylum 1% ( 100Ml ) Solution Solution , Feracryylum 1% Sterile Solution 100Ml Solution , Ferocrylion 1%Solution , Ferrous Ascorbate Equivalent To Elemental Iron 100 Mg + Folic Acid 1.1 Mg Tab. , Fibrin Sealantlyo 2Ml Kit , Fibrin Sealant Lyo 4Ml Kit , Fielderxtr , Fielder Fc , Fielder Xt , Filgrastim 300 Mcg ( Prefilled Syrings ) , Vial , Film Corner Cutter , Film Cutter , Film Cutters Big Size , Filter Paper Sheet ( ( Whatmann No 01 ) Sheets ) , Consumable , Filtrate Bag 10 L ( Drainage Bag 10 L ) Compatible With Multifiltrate Machine , Fixerpowder 22.5Ltrs. , Flatus Tube All Size , Flexometallictube Internal Diameter ( 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5 ) Mm , Flow Diverterflow Diverter:Fully Re-Sheathable, 48 Wire Braded Made Up Of Cobalt Cromium & Platinium Tungusten Alloy With Shoft Distal And Angled Tip, Fda Approved. , Flucinalone .025 + Neomycin.5% 20Gm. Ointment , Fluconazoleffs Bottle 100Ml Iv. , Fluconazole Eye Drop 3 Mg / Ml ( 10 Ml Vial ) Eye Drop , Fluconazole Ip, 0.5% W / W 15Gmointment , Fluency Self Expandable Stent Graft Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts ( Both Luminal And External Surface Covered By Graft ) . Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism.Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm, 100Mm, 120M , Flumazenil 0.1 Mg / Ml5 Ml Multiple Dose Vial , Fluorescein Sodium Opthalmic Strips , Fluorscein Sodium 20% 3 Ml For Iv Use ( Inj. ) , Fluoxetine 10Mg Tab. , Flupenthixol 20 Mg / Ml. Inj. , Fluphenazine Deconate 25 Mg. Inj. , Flurbiprofen + Hpmc Ophthalmic Solution Eye Drops1 Eye Drop , Fluroscin Sodium Injection 10%Inj. , Fluticasonerespules0.5 Mg / 2 Mlinhaler , Fluticasone 0.05 % 10Gmcream , Fluticasone 0.05 % 20Gmointment , Fluvoxamine-100Mg Tab , Foamlite Dressings Transleucent Foam Dressings With Protective Barrier Against Water, Bacteria And Viruses, Water Proof Orshower Proof With Perforated With Gentle, Skin-Friendly Silicone Adhesive, Easy To Apply & Re-Position Designed To Absorb Low Exudate Levels And Helping Maintain A Moist Wound Healingenvironment Size 5X5 Cm , Fogarty Arterial Emblectomy Catheterfor Arterial Embolectomy Procedure, Usable Length 60-80 Cm. Sizes 3Fr, 4Fr, 5Fr, 6Fr, 7Fr , Foleys Urinary Bloon Catheter 3 Way Size 10. , Foleys Urinary Bloon Catheter 3 Way Size 12. , Foleys Urinary Bloon Catheter 3 Way Size 14 . , Foleys Urinary Bloon Catheter 3 Way Size 16 . , Foleys Urinary Bloon Catheter 3 Way Size 8. , Foleys Urinary Catheter Size8 - 2 Way. , Foleys Urinary Catheter Size 10 - 2 Way. , Foleys Urinary Catheter Size 12 - 2 Way. , Foleys Urinary Catheter Size 14 - 2 Way. , Foleys Urinary Catheter Size 16 - 2 Way. , Foleys Urinary Catheter Size 18 - 2 Way. , Folic Acid Tab ( 400 Mcg ) , Tablet , Fondaparinox 10 Mg / 0.8 Ml 1 Unitinj. , Formaldehyde ( Formalin ) 37% Acq Dilute 34 Ml Formaledehyde Solution With Water To Produce 100Ml ( 450 Ml Bottle ) , Formalin Tab. Bottle Of 100 Tab. , Formaline 450Ml Solution , Framycetin Drops 5Ml Eye Drop , Framycetin Sulfate 100Gm. Cream , Fully Automatic Disposable Biopsy Gun Should Have Penetration Depth 18 Mm, And Angle Sample Notch And Two Firing Bottom Option, With Color Coding For Easy Detection Of Gauzeall Size , Fully Automatic Disposable Biopsy Gun Should Have Penetration Depth 22Mm, And Angle Sample Notch And Single Firing Bottom Option, With Color Coding For Easy Detection Of Gauzeall Size , Furesemide 30Ml Syp. , Furosemide 20Mg. Tab , Furosemide 40Mg. Tab. , Fusidic Acid Ip 2% Betametasone Valerate Ipeq. To Betametasone--0.10% Preservative Chlorocresol Ip 0.12% 10Gmointment , G - Plast Non Woven Tape , G Lions For G8 Navigationndi Passive Sphere , G.V.Paint 500 Ml. Liquid , Gabapentin 300Mg Tablets , Gabapentin / Nortryptaline 300 + 10Mg Tablets , Gabapentine ( 100 Mg ) , Tablet , Gaia Wire 1 , Gaia Wire 2 , Ganciclovir 1.5 Mgointment , Gas Gangrene Antitoxin 10000 Iu / Ml 40000 Iuinj. , Gatifloxacin 100Ml Inj. , Gel Arm Rest , Gelofuscin 500 Ml Iv , Gentamycin + Betamethasone Eye / Ear Drop 3% 10Mleye Drop , Gentamycin Ear Drops + Hydrocortisone Ear Drops10mleye Drop , Gentamycine Cream , Gigli Saw Wire . , Glibenclamide Sr 5Mg Tab. , Glide Sheath Slender Terumo 7F , Glider Torque Device , Glucose In Glycerine Drop 25% 15Ml / Vial 1 Eye Drop , Glue ( N - Butyl Cyanoacrylate ) , Glycerine + Magnesium Sulphate Crystal250ml Jar , Glycerine Ip Solution ( 100Ml Bottle ) , Bottle , Glyceryl Cocoate, Cocoamidopropyl Betain, Glycerine, Disodium Laurth Sulfosuccinate , Sodium Citrate With Normal Ph Of 5.5 Offering Log 3 Reduction Virucidal And Bactericidal Hand Disinfection Products ( Hand Lotion ) 500 Mlbot. Liquid , Glyceryl Trinitrate 5Mg / Ml10ml Vial ( Nitroglycerine ) Inj. , Graft Master ( Covered Stent ) Complete Sizes Sequence1 Sets , Guide Catheter For Neurointervention 0.088 Id Full Length Stainless Steel Braid Reinforced Proximal Support Zone Transitioning To 4 Cm Distal Flexible Zone With Large .088 Inner Lumen Distal Shaft Hydrophilic Coating For Optimal Trackability 80 Cm Cm Lengths With Straight Tip Shape Should Be Dgci And Usfda Approved , Guide Catheter For Neurointervention 0.088’’ Idfull Length Stainless Steel Braid Reinforced Proximal Support Zone Transitioning To 4 Cm Distal Flexible Zone With Large .088 Inner Lumen Distal Shaft Hydrophilic Coating For Optimal Trackability 80 Cm Cm Lengths With Straight Tip Shape Should Be Dgci And Usfda Approved , Guide Liner V3 6F , Guide Wire - Teflon Coated - 0. 032 X 150 Cm J , Guide Wire - Teflon Coated - 0. 035 X 150 Cm J , Guide Wire - Teflon Coated - 0. 035 X 260 Cm J , Guide Wire ( Staight ) 0.035 Inch , Guide Wire 0.035 ( 0.89 Mm ) Hydrophilic Tip At Both End , Guide Wire 0.35 No . , Guide Wire 0.38 No . , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip, 0.014, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Compatable With Item Of Sr. No 3, 4, 52.Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip, 0.014, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 300 Cm Length High Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014, 300 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Should Be Compatable With Item Of Sr. No 3, 4 And S2. Used For Neurovascularpurpose Should Be Dcgi And Usa-Da Approved. , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 300Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014, 300 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascularpurpose Should Be Dcgi And Usfda Approved. , Guide Wire For Microcatheter For Avm Management Size 0.008 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.008, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Guide Wire Hydrophyliccoated Floppy Tip Straight; 0.018 , Guide Wire Hydrophyliccoated Floppy Tip Straight; 150Cm-0.025 , Guide Wire Hydrophyliccoated Floppy Tip Straight; 150Cm-0.035 , Guide Wire Hydrophylic Coated J-Tipped; 150Cm-0.035 , Guide Wire Ptfe, Straight Tip; 150Cm-0.025 , Guide Wire Ptfe, Straight Tip; 150Cm-0.035 , Guide Wire, Zebra, Straight Tip; 150Cm-0.035 , Guidewire 0.035, 150 Cms 0.035 , Hydrophilic Guidewire 150 Cms Length , Guidewire 0.035, 150 Cms0.035 , Hydrophilic Guidewire 150 Cms Length , Guiding Catheter 6F Jl Sh 3.0 , Guiding Catheter 6F Jl Sh 3.5 , Guiding Catheter 6F Jl Sh 4.0 , Guiding Catheter 6F Rdc , Guiding Catheter 7F Jl 3.0 , Guiding Catheter For Neurointervention 5F Neurovascular Guiding Catheter 5F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 6F Neurovascular Guiding Catheter 6F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 6F6 Fr Intracranial Support Catheterwith 0.072 Id, Upto 130 Cm Long With Flat Pitch Nitinol Braiding , Guiding Catheter For Neurointervention 7F Neurovascular Guiding Catheter 7F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 8F Neurovascular Guiding Catheter 8F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointerventiondistal Access Catheter: 5 Fr Intracranial Support Catheterwith 0.058 Id, Upto 130 Cm Long With Flat Pitch Nitinol Braiding , Guiding Catheters 6F 3D Rc , Guiding Catheters 6F Al 0.75 , Guiding Catheters 6F Al 1.0 , Guiding Catheters 6F Al 2.0 , Guiding Catheters 6F Ar 1.0 , Guiding Catheters 6F Ar 2.0 , Guiding Catheters 6F Ebu 3.0 , Guiding Catheters 6F Ebu 3.5 , Guiding Catheters 6F Ebu 4.0 , Guiding Catheters 6F Hockey Stick , Guiding Catheters 6F Jl 3.0 , Guiding Catheters 6F Jl 3.5 , Guiding Catheters 6F Jl 4.0 , Guiding Catheters 6F Jl 4.5 , Guiding Catheters 6F Jr Sh 3.0 , Guiding Catheters 6F Jr Sh 3.5 , Guiding Catheters 6F Jr Sh 4.0 , Guiding Catheters 6F M Radial , Guiding Catheters 6F Mpa 1.0 , Guiding Catheters 6F Mpa 2.0 , Guiding Catheters 6F Mpa 3.0 , Guiding Catheters 6F Rrd , Guiding Catheters 6F Xb 3.0 , Guiding Catheters 6F Xb 3.5 , Guiding Catheters 6F Xb 4.0 , Guiding Catheters 6F Xb Lad 3.0 , Guiding Catheters 6F Xb Lad 3.0 , Guiding Catheters 6F Xb Lad 3.5 , Guiding Catheters 6F Xb Lad 4.0 , Guiding Catheters 6F Xb Rc 3.5 , Guiding Catheters 7F 3D Rc , Guiding Catheters 7F Al 0.75 , Guiding Catheters 7F Al 1.0 , Guiding Catheters 7F Al 2.0 , Guiding Catheters 7F Ar 1.0 , Guiding Catheters 7F Ar 2.0 , Guiding Catheters 7F Ebu 3.0 , Guiding Catheters 7F Ebu 3.5 , Guiding Catheters 7F Ebu 4.0 , Guiding Catheters 7F Hockey Stick , Guiding Catheters 7F Jl 3.5 , Guiding Catheters 7F Jl 4.0 , Guiding Catheters 7F Jl 4.5 , Guiding Catheters 7F Jr 3.5 , Guiding Catheters 7F Jr 4.0 , Guiding Catheters 7F Jr Sh 3.0 , Guiding Catheters 7F Jr Sh 3.5 , Guiding Catheters 7F Jr Sh 4.0 , Guiding Catheters 7F M Radial , Guiding Catheters 7F Mpa 1.0 , Guiding Catheters 7F Mpa 2.0 , Guiding Catheters 7F Mpa 3.0 , Guiding Catheters 7F Rdc , Guiding Catheters 7F Xb 3.0 , Guiding Catheters 7F Xb 3.5 , Guiding Catheters 7F Xb 4.0 , Guiding Catheters 7F Xb Lad 3.0 , Guiding Catheters 7F Xb Lad 3.5 , Guiding Catheters 7F Xb Lad 3.5 , Guiding Catheters 7F Xb Lad 4.0 , Guiding Catheters 7F Xb Rc 3.5 , Guiding Catheters 7F Xb Sh 3.0 , Guiding Catheters 7F Xb Sh 3.5 , Guiding Catheters 7F Xb Sh 4.0 , Guiding Sheath , Guioe Wire For Microcatheter For Avm Management Size 0.008 Inch 200Cm Length High Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.008, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Compatabie With Item Of Sr. No 1, 2 And 3. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Gynae Belt . , H 1, 2, 3 Catheter5 F , H1 Catheter4 F , H1n1 Vaccine ( Swaine Flu Vaccine ) , Haemophilous Influenze B ( Hib ) Vaccine , Haemostasis Dressing , Halometasone 0.05%Ointment , Halometasone 0.05% Andfusidic Acid 2% W / Wointment , Halometasone Monohydrate 0.05% W / W + Fusidic Acid Ip 2.00% W / W + Propylparaben Ip 0.015% W / W Cream Of 10 Gm Tube , Halometasone Monohydrate 0.05% W / W, + Cholorocresol Ip 0.1 % W / W Cream Of 10Gm Tube , Haloperidol5mg / Ml ( 1 Ml Amp ) Inj. , Haloperidolnasal Drops , Haloperidol ( Long Acting ) Deconate 50 Mg. Inj. , Halothane 250Ml , Hand Activated Blade With Flat Tip For Spot Coagulation Sharp Edges For Cutting, Blunt Convex Surface For Broadest Area Of Coagulation And Concave Surface For Sealing Vessels, Compatible With Gen11 , Hand Activated Dissecting Hook Blunt Outer Radius For Captive Coagulating, 60-Degree Sharp Inner Radius For Cutting, Compatible With Gen11 , Hand Pressure Gauge For Intra Cuff Pressure Monitoring , Handpiece ( Blue ) Compatible With Gen 11 , Handpiece ( Transducer ) Compatible With Gen 11 , Hanger Channel Type 10 X 12 , Hanger Channel Type 12 X 12 , Hanger Channel Type 12 X 15 , Hanger Channel Type 12 X 6 , Hanger Channel Type 14 X 14 , Hanger Channel Type 14 X 17 , Hanger Channel Type 15 X 6 , Hanger Channel Type 6½ X 8½ , Hanger Channel Type 8 X 10 , Hanger Clip 10 X 12 , Hanger Clip 12 X 12 , Hanger Clip 12 X 15 , Hanger Clip 12 X 6 , Hanger Clip 14 X 14 , Hanger Clip 15 X 6 , Hanger Clip 6½ X 8½ , Hanger Clip 8 X 10 , Hcg5000 Iu 1Ml / Amp Unit Inj. , Hcg 2500 Iu 1Ml / Amp Unit Inj. , Heart Positioner For Beating Heartshould Be A Low Profile Positioner For Apex And Off Apex Position And To Lift The Heart. , Heart Positioner For Beating Heart Should Be A Low Profile Positioner For Apex And Off Apex Position And To Lift The Heart. , Heart Rail Ii Terumo , Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients , Hem - O - Lock Polymerclip, Usfda Approved , Hemmorhoidal Circular Staple Hemmorhoidal Circular Stapler 33Mm With Controlled Tissue Compression For Variable Tissue Thickness, Leg Length Of 4Mm. , Hemodaylasis - Blood Tubbing Full Set ( Ce Certified ) . , Hemodaylasis - Post Pum. , Hemodialysis Fluid For Bicarb Made ( Part A 10 Ltr +Part B 500Gm 2 / Pkt ) Solution , Hemodialysis Fluid For Bicarb Made ( Part A 10 Ltr +Part B 500Gm 2 / Pkt ) , Consumable , Hemodilaysis Catheter8f , Hemorrhoidal ( 33Mm ) Circular Stapler ( With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 5.5 Mm ) , Hemostatic Gelatin Thrombin Matrix 10 Ml Kit , Hepatitis A Vaccine - Administered By Ection Into The Muscle Of The Upper Arm. Two Separate Shots Of 0.5 Ml For Children Inj. , Hepatitis A Vaccine - Administered By Ection Into The Muscle Of The Upper Arm. Two Separate Shots Of 1Ml For Adults Inj. , Hernia Kit Containingpolypropylene Mesh 7.6Cm X 15Cm Polypropylene Suture Size 2-O, 90Cm , 30Mm ½ Circle Rb Needlepolyglactin910 , Triclosan Coated Usfda Approved Suture Size 2-O, 70Cm, 30Mm ½ Circle Rb Needle , Hernia Kit Containing Polypropylene Mesh 6Cm X 11Cm Polypropylene Suture Size 2-O, 90Cm , 30Mm ½ Circle Rb Needlepolyglactin910 , Triclosan Coated Usfda Approved Suture Size 2-O, 70Cm, 30Mm ½ Circle Rb Needle , Hf-Female Spike Adapter Compatible With Multifiltrate Machine , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma Silicon Elastomer Coated- 2 Way , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma. Silicon Elastomer Coated - 3 Way , High Flow Triple Lumen Polyurethanecatheter Tray.Fr-7, G-16X16x18, L-15 / 16Cm. With Guide Wire, Triple Lumen Catheter, Puncture Needle, Short Iv Canula, Rollerson Syringe, Dilator, Scalpel, 3 Injection Cap, Drape.. , High Pressure Line , High Speed Screen 10X12 X-Ray , High Speed Screen 6.5X8.5 X-Ray , High Speed Screen 8X10 X-Ray , High Torque Bmwpreformedj 190Cm , High Torque Bmw 0.014X 260Cm , High-Volume, Low-Pressure Cuff Preformed Oral And Nasal Rae Tubes For Reducing The Risk Of Kinking And Also To Allow Unobstructed Access For Surgical Procedures At Head And Neck , Hiv Disposable Preventive Kit ( For Surgeon ) , Homatropine Hydrobromide 2 %W / V 5Ml Eye Drop , Hormonal Intrauterine System Hius - B Erinna , Hubsite Huber Bebel Needle ( G-20, G-22, Length-22, 25Cm ) With Wings And Flexible Polyurethane Extension Tube ( L-30Cm ) . , Human Anti-D Immunoglobulin 300 Mcg , Human Hepatitis B Immunoglobulin ( 100Iu ) / 1Ml Injection , Human Mixtard 40Iu 10Ml Inj , Human Normal Immuneglobulin ( I.P. / E.P. ) 5Gm. / 100Ml Inj. , Humbeysknife Disposable Blade . , Humidifier { Hme Filter } Adultsize , Humidifier { Hme Filter } Paediatricssize , Hyaluronidase ( 1500Iu ) Amp. Injection , Hydralazine Hydrochloride 20Mg / Ml ( 1 Ml Amp / Vial ) Inj. , Hydrazaline 1 Lac Iu Inj. , Hydro Twister Guide Wire , Hydro Wire , Hydrocephalus Shunt System Complete Set Regular Size Vp Lp With Bacterial Resistant Tubing . , Hydrocephalus Shunt System Complete Set Regular Size Vp Mp With Bacterial Resistant Tubing . , Hydrocolloid Dressings Self Adherent Moist Wound Dressing Made Up Of Triple Hydrocolloid Matrix With Elastomeric Polymer Forpressure Ulcers / Dry Woundssize, 7.5X7.5 Cm, Oval, 15X15cm, 10X10cm , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified. , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified. , Hydrogel Barrier Based On Sepra Technology Swells Once In Contact With Moisture To Minimize Tissue Attachment , Hydromorphone 1Mg Tablets , Hydromorphone 2Mg Tablets , Hydrophilic Coated .032”, .035” X 150 Cm Angled & Straighttip Guide Wire With Glider Torque Device , Hydrophilic Guide Wire ( Terumo ) , Straight Tip, 150Cm, 0.035 Diameter , Hydroquinone 2 %W / W + Mometasone Furoate 0.1 %W / W + Tretinoin 0.025 %W / Wcream , Hydroquinone 2% + Oxybenzone 2.5% +Octinoxate 9% ( Melalite 15% ) 0.04 Ointment , Hydroquinone Usp..2.0% W / W Tretinoin Usp .0.025 % W / W Mometasone Furoate Usp ..0.1 % W / W 20Gmointment , Hydroxy Chloroquin 200 Mg Tablets , Hydroxy Chloroquin 400 Mg Tablets , Hydroxy Propyl Methyl Cellulose ( Hpmc ) 2 %W / W-Pfs With Cannula Injection , Hydroxypropyl Methylcellulose Opthalmic Solution ( Hpmc ) 2 %W / W , 5Gm. Gel ( Pfs Syringe ) , Hyoscine Butylbromide 10Mg. Tab. , Hyoscine Butyldromide 20Mg. / 1Ml Amp. For Im / Iv Use Injection , Hypoallergenicporous Adhesive 10Cm. X 2M. , Hypodermic Needles For Single Use -Gauze 23 Bis Length, 25 +1 / -2 , Hystocryl , I P Needle ( With Echogenic Tip ) , Ibandronic Acid 150 Mg Tab. , Ibandronic Acid 50 Mg Tab. , Ibuprofen - 400Mg Tab. , Ibuprofen 400 + Paracetamol 500Mg. Tab. , Ibuprofen Syrup 100Mg / 5Ml ( 60 Ml Bottle ) Syp. , Icp Monitor Patient Transducer Kit Compatible With Codeman Monitor , I-Gel Size-3 , I-Gel Size - 4 , I-Gel Size - 5 , Image Intensitycover , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 5Cmx 5Cm , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 7Cmx 7Cm , Impression Compound. , Incentive Spirometer 3 Balls With 3 Different Chambers , Indocyanine Greeninjection10ml , Indomethacin 1% 5Ml Eye Drop , Indomethacin 25Mg Cap. , Infaltion Device With Survival Kit , Infant Feeding Tube ( Catheter ) All Size . , Inflation Device , Inflation Device Gun Type , Influenza Vaccine 0.5 Ml Vaccine , Infusion Line With Three Way Extension Port And Closed Iv Connection Device . , Infusion Line With Two Way Extension Port And Closed Iv Connection Device. , Injection Protamine50mg. / Per 5Ml , Injection Tirofiban , Instillaion Mapc Tube , Instillaion Therapy Dressing Made Of Black Polyurethane Ester Spiral Cut Sheet Pore Size 400 To 600 Micronsize 12.5 X18 X3.3Cm , Instillaion Therapy Dressing Made Of Black Polyurethane Ester Spiral Cut Sheet Pore Size 400 To 600 Micron, Size 7.5X10 X3.3Cm , Instillation Therapy Largepu Foam. Pore Size 400-600 Micron , Insulin Glargine 100Iu - 10Ml Vialinj. , Insulin Pen Needle 32G ( 4Mm ) Packing 100 Units. , Insulin Syringe ( 1Ml With 31 G Needle ) , Intensifying Screen ( Blue Sensitivity ) 10 X 12 , Intensifying Screen ( Blue Sensitivity ) 12 X 12 , Intensifying Screen ( Blue Sensitivity ) 12 X 15 , Intensifying Screen ( Blue Sensitivity ) 12 X 6 , Intensifying Screen ( Blue Sensitivity ) 14 X 14 , Intensifying Screen ( Blue Sensitivity ) 14 X 17 , Intensifying Screen ( Blue Sensitivity ) 15 X 6 , Intensifying Screen ( Blue Sensitivity ) 6½ X 8½ , Intensifying Screen ( Blue Sensitivity ) 8 X 10 , Intercostal Drainage Bag All Size , Interferon Beta-1A 30Mcginj. , Intermittent Electric Pneumatic Leg Compression Device With Pump Per Pair , Internal - External Biliary Drinage Catheter , Internal Externalbiliarydrainagecatheter 8 F And 10F , Internal External Biliary Drinage Catheter Set , Intra Cameral Epitrate Inj. , Intra Cameral Pilocarpineinj. , Intra Cameral Xylocaine Inj. , Intracath 16G. , Intracranial Stent16 Wire Nitinol Braiding With Sliding Cell Technology Like Leo+. Two Radio-Opaque Helicoidal Markers Which Run On Entire Body Of Stent.Flared Ends For Better Wall Apposition In Tight Curves.Compatible With Vasco 21 / 25 / 28, Included Inside Stent Packing. Re-Sheathable Upto 90%, Available In Diameter Of 3.5 / 4.5 / 5.5 Mm Sizes With Various Lengths Like 18Mm To 75Mm. , Intracranial Stentlow Profile 16 Wire Nitinol Braiding With Sliding Cell Technology Like Leo+ Baby. Two Radio-Opaque Helicoidal Markers Which Run On Entire Body Of Stent.Flared Ends For Better Wall Apposition In Tight Curves.Compatible With Vasco 10 ( 0.017 ) , Eclipse 2L. Re-Sheathable Upto 90, Available In Diameter Of 2.0 / 2.5 / 3.0 Mm Sizes With Various Lengths Like 12Mm To 35Mm. , Intrauterine Access Balloon Catheter9f , Intravenous Set With Airway And Needle ( Adult ) As Per Drugs Act. Specification , Intravenous Set With Airway And Needle ( Pediatrics ) As Per Drugs Act. Specification , Intravesical Bcg Vaccine ( Oncovac ) ; 40Mg / Vial , Introducer Needle 18G X 7Cm , Introducer Needle 20G X 4Cm , Introducer Needle 21G X 4Cm , Introducer Sheath 5F Femoral , Introducer Sheath 6F Femoral , Introducer Sheath 7F Femoral , Intubating Lma ( Ilma ) Size ( 3, 4, 5 ) Size ( 3, 4, 5 ) , Intubating Stylets , Iodinated Non Ionic Contrast Iohexol 100Ml ( Omnipaque ) 350 , Iodoform 500 Gm Powder , Ionic Contrast Media 60% 20 Ml.Inj. , Ionic Contrast Media 60% 50 Ml.Inj. , Ionic Contrast Media 76% 50 Mlinj. , Ipratropium Bromide 40 Mcg + Solbutamol200 Mcginhaler , Irinotecan 100 Mg Inj ( 1 Ml Amp ) , Iron + Folic Acid 300Mg+ 0.5Mg Cap. , Iron 2Ml Inj. , Iron And Folic Acid Enteric Coated . Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid Ip 0.5 Mg Granulestab , Iron And Folic Acid Enteric Coated . Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid Ip 0.5 Mg Granules Tab. , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Equ. To Ferrous Iron 100 Mg And Folic Acid 0.5 Mg ( Blue Tablet ) , Iron Dextran50 Mg El Iron / Ml Inj. , Iron Drop15ml Eye Drop , Iron Sorbitolinj. , Isoflavones 60 Mg. In Control Release Form Cap , Isoflavones 60 Mg. In Control Release Form Cap. , Isophane Insulinip, Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Suspension Contains 40 Iu ( 10Ml Vial ) Inj. , Isoprenaline 2 Mg / Ml Inj. , Isoprenaline 2Mg / Ml Ampoule Injection , Isopropyl Alcohol Ip 55.0% W / W, Purified Water Ip 10.0% W / W, Propellant Hydrocarbon 35.0% W / Waerosol Spray 200Gm . Spray , Isosorbide Dinitrate ( 10Mg ) Tab. , Isosorbide Dinitrate ( 5Mg ) Tab. , Isosorbide Dinitrate Ip - 5Mg Tab. , Itraconazoleointment , Itraconazole Eye Drops 1% 1Ml Eye Drop , Iv C Filter , Iv Cannula Butterfly Sizes - 20G, 22G, 24G, , Iv Cannula With Inthracathsize 20G With Inj.Valve ( Port ) . , Iv Cannula With Inthracathsize 26G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 16G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 18G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 22G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 24G With Inj.Valve ( Port ) . , Iv Codan Drip Set . , Iv Extension Set With Three Way --10 Cm , Iv Extension Set With Three Way --100 Cm , Iv Extension Set With Three Way --150 Cm , Iv Set - 4X1.5 ( 0.80 X 38Mm ) Diameter . , Iv Set With Luer Lock , J Tipterrumoglidewire Beta0.022, 0.027 Inch, 150 Cms , J Tipultra Stiff / Super Spport Wire0.018 & 0.014Inch , J Tip Amplatz Ultra Stiff Wire0.035 Inch, 260 Cm, 300 Cm , J Tip Terrumoglidewire0.035 Inch 150Cm , J Tip Terrumoglidewire0.035 Inch, 150Cm, 260Cm , Jejunal Feeding Tube , Jelly Ecg Jelly 250 Gms , Jelly Ecg Jelly 250 Gms Jelly , Jelly Ultra Sound Jelly 250Ml Bottle , Jelly Ultra Sound Jelly 250Ml Bottlejelly , Kallis Pad. , Kenamycin 75Gm. Inj. , Ketamine 100 Mg2ml Inj. , Ketamine Hydrochloride 10Mg / Ml ( 10Ml Vial ) Inj. , Keto Diastix Strip 100Pcs , Ketoconazole 0.02 Ointment , Ketoconazole Ointment 2% 15Gm Tube ( 15 Gm ) , Ointment , Ketorolac Tromethamine + Ofloxacin 5Ml Eye Drop , Ketotifen 5Ml Eye Drop , Knee Cap Large . , Knee Cap Medium . , Knee Cap Small . , Knee Cap With Hinges . , Kojic Acid+Arbutin+Mulberry Extract+Octinoxateointment , Kojic Acid+Vit Cointment , L- Alanyl-L-Glutamine Ffs Bottle 50Ml Iv , L Argine Garanules 5Gms. , L- Isoleucine 560 Mg I - Methoionine 6.8 Mg I - Tryptophan 3 Mg I- Leucine 10 Mg & Arginine Combinationffs Bottle 200 Ml Iv , L S Belt Padded With Dc S / M / L , L S Belt With Pelvic Support S / M / L , L S Frame S / M / L , Labetalol 100 Mgtab , Labetalol 100 Mg Tab. , Labetalol ( 100 Mg ) , Tablet , Lacosamide 100 Mginj. , Lacosamide 200Mg / Vials Injection , Lactic Acid I P 6%W / Wglycine I P 3%W / Wammonium Chloride I P 0.5%W / Wsodium Chloride I P 0.5%W / Wpotassium Chloride I P 0.5%W / Wclacium Lactate I P 0.5%W / Wmagnesium Chloride I P 0. 3%W / Wsodium Dihydrogen Phosphate Dihydrte I P 0.5%W / W 50Gm.. , Lactobacillus Acidophilus & Bifidobacterium Capsulecap Cap , Lactobacillus ( ( Lactobacillus 60 Million Spores ) ) , Tablet , Lactogen Powder No-1, 400Gms Powder , Lactulose 10 G / 15 Ml Oral Solution Sachets Sachet , Lactulose Solution Usp Each 5 Ml Cointains Lactulose Concentrate Usp Equaient To Lactulose 3.325Gm Aqueous Base Q.S ( 200Ml ) Syp , Lactulose Solution Usp Each 5 Ml Cointains Lactulose Concentrate Usp Equivaient To Lactulose 3.325Gm Aqueous Base Q.S ( 200Ml ) Syp. , Lactulose Syrup 200Mlsolution , Lalanine 8.2G + Lglutamine13.46 Inj. , Lamino Spinal Material 50Gsm. Sms Polypropylene Water Repallant Sheet Size 1.5X3m. Incise Sheet 15X35cm. Poly Sheet Lining 1.20X1.20M . , Lamotrigine25 / 50 Tab. , Lancet Point Spinal Needle Sets ( Quincke ) All Size . , Laparoscopic ( 33Cm ) L Hook With Ptfe Coated Ez Clean Electrosurgicla Tip , Laparoscopic Absorbable Mesh Tacker 5 Mm With 30 Preloaded Pgla Tacks Having Ratcheted Mechanism Providing Tactile Feedback When Firing. Us Fda Approved , Laparoscopic Non-Absorbable Mesh Tacker 5 Mm With 30 Preloaded Titanium Tacks Having Ratcheted Mechanism Providing Tactile Feedback When Firing. Us Fda Approved. Us Fda Approved , Laproscopic Drape, Size:150 X 250 Cm, Aperture:30 X 35Cms, 1 Kit , Laproscopic Port Washers, For 10Mm Trocar , Laproscopic Port Washers, For 5Mm Trocar , Large Acetyl Homopolymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Large Size ( 26X15x3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Large Size ( 6.2 X 12.5Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Large Size Abdominal Dressing With Non Adherent For Abdominal Wounds. Usfda Approved. . , L-Arginine I.P. 3Gm Proanthocyanidin 75 Mgrespule , Larygenal Mask Airway Protector- Sterile, Phthalate Free, Single Use Silicone Material Airway Tube With Dynamic Curve And Elongated Cuff To Facilitate The Upper Esophageal Seal. Recommended Maximum Intracuff Pressure Of 60 Cm H20, Unique Cuff Pilot Technology ( In-Built Manometry ) For Continuous Cuff Pressure Monitoring, Allows Direct Intubation With Dual Gastric Access And Mr Safe, Available In Size 3, 4, 5 With Intubating Ability Of Et Tube Having Size Ranging From 6.5 To 7.5 And Larger Og Tube Insertion Ability Of 16 To 18 Fr Respectively. , Laryngeal Mask Airway Blockbuster Disposable Silicone .Fourway Connector Makes It Easy To Fix After Placement, Itegrated Bite Block Prevents Airway Occlusion, Airway Tube Is More Than 95 Degree Angulated Short Airway Tube Provides Easy Insertion And Matches Oropharyngeal Curve, Inlet And Outlet Of Gastric Access Channel Design For Easy Insertion Of Gastric Tube, Sputum Collection Device Can Collect Small Quantity Of Sputum, Guidance Device Allows The Et Tube To Direct Towards Laryngeal Opening At 30 Degree Angle, Which Enhances Success Rate Of Endotracheal Intubation, Better Flexibility And Biocompatibility With Silicone Material. Size - 1, 1.5, 2, 2.5, 3, 4, 5, Should Have Fda And Ce Marked , Laser Fiber - End Firing, 365 Micrometre, Compatible With 100W Laser System , Laser Fiber - End Firing, 550 Micrometre, Compatible With 100W Laser System , Laser Fiber - Side Firing, 550 Micrometre, Compatible With 100W Laser System , Lasilactone 40Mg Tablets , Latanoprost 50Mcg / Ml. 2.5Ml Eye Drop , Latex & Pvc Free Three Chambered Bag 625 Ml ( 740 Kcal ) With Mct Lct Ratio 1:1 For Central Venous Infusion. , Latex & Pvc Free Three Chambered Bag 625 Ml ( 740 Kcal ) With Mct Lct Ratio 1:1 For Central Venous Infusion. , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Latovision 0.005% Latanoprost Eye Drop 2.5Mleye Drop , Lead Appron -Skirt / Waist Type , Lead Aprons Adult Size , Lead Aprons With Detachable Thyroid Shield; Size: Large 0.5 Mm Lead Equivalent Radiation Protection , Lead Aprons With Detachable Thyroid Shield; Size: Medium 0.5 Mm Lead Equivalent Radiation Protection , Lead Aprons With Detachable Thyroid Shield; Size: Small, 0.5 Mm Lead Equivalent Radiation Protection , Lead Curtain , Lead Divider 12 X 5 , Lead Divider 15 X 6 , Lead Glass For Dsa 2X4 , Lead Gloves; 6.5 Size , Lead Gloves; 7 Size , Lead Gloves; 7.5 Size , Lead Gown Adult Size , Lead Lettersa To Z , Lead Letters R & L , Lead Markar , Lead Numbers 0 To 9 , Lead Pass Box , Lead Sheilds 11 X 6 , Lead Sheilds 12 X 6 , Lead Sheilds 14 X 17 , Lead Sheilds 14 X 7 , Lead Sheilds 15 X 6 , Lead Sheilds 17 X 7 , Lead Sheilds 7 X 4 , Lead Sheilds 9 X 5 , Lead Table Shield; Saddle Bag Style, Around 52 X 18 1 / 2 X 12 Size, 0.5 Mm Lead Equivalent Radiation Protection , Lead Under-Table Shield; For Attachable Into Table Side Rails, Around 36 X 36 Size0.5 Mm Lead Equivalent Radiation Protection , Lectodex 500Gm. Powder , Led Shield Cover , Led Viewing Box Size 14 X 17 , Left Heart Vent Catheterswith Perforated Tip, Malleable Bodies With Depth Mark, All Vents Should Terminate With A Vented Or Nonvented ¼ Inch Connector, Sizes- 15, 16, 18 , Left Heart Vent Catheters With Perforated Tip, Malleable Bodies With Depth Mark, All Vents Should Terminate With A Vented Or Nonvented ¼ Inch Connector, Sizes- 15, 16, 18 Fr , Lenolidamide 20Mg. Capsule , Leuprobide Depot3.75Iu Inj. , Leuprolide Depot Inj ( 3.75Mg ) , Injection , Levipril 65Mg / Ml Injection , Levodropropizine Ph Eur 30 Mg+Chlorpheniramine Maleate Ip 2Mg / 5Ml, 120Ml Bottle Syp. , Levolin ( 0.6Mg / 2.5Ml ) --Pack Of 5Respules , Levosalbutamol 0.31Mg, Each Respule 2.5 Ml , Levosalbutamol 0.63Mg, Each Respule 2.5 Ml , Levosalbutamol 1.25Mg, Each Respule 2.5 Ml , Levosimendan 12.5Mg / 5Ml Vial Injection , Lidocaine 4%Injection 30Ml Vial , Lidocaine And Prilocaine Cream Usp30gmcream , Lidocaine Hydrochloride 1% ( 10Mg / Ml ) Inj. , Lidocaine Usp 1.0% W / W, Cetrimoide Ip 0.1% W / W, Polyvinyl Polymer 2.8% W / W, Solvent And Propellant Q.S. To 100.0% W / Waerosol Spray 50Gsolution , Lidocaine Usp 1.0% W / W, Cetrimoide Ip 0.1% W / W, Polyvinyl Polymer 2.8% W / W, Solvent And Propellant Q.S. To 100.0% W / Waerosol Spray 50G . Spray , Lifestent:Sfa Stent Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm , Ligation Metal Clips Small , Ligation Polymer Clips Large , Ligation Polymer Clips Medium , Ligation Polymer Clips Medium And Large , Lignocaine 5% Spinal, 2Mlinj. , Lignocaine Hydrochloride 4% Eye5ml Vial5ml Eye Drop , Lignocaine Topical 10%. Solution , Lignocaine Topical 4%. Solution , Lignocaine Tropical Sol. Ups 30Ml Eye Drop , Lignocaine Viscousointment , Lipid Emulsion 20% 500Ml With Fish Oil, Soybean Oil And Vitamin E ( 1000 Kcal ) Iv , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 10 Cm X 25 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 13 Cm X 13 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 15 Cm X 15 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 20 Cm X 20 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 8 Cm X 8 Cm , Liquid Embolic System Used For Avm Management Liquid Embolic System Evoh Co-Polymer For Complete Occlusion In Controlled Embolization Procedures Like Avm, Compatable With Item Of Sr. No 1, 2 And 3. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Liquid Embolic System Used For Avm Managementliquid Embolic System Evoh Co-Polymer For Complete Occlusion In Controlled Embolization Procedures Like Avm, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approvedpack With 1.5Ml Liquid Embolic And 1.5Ml Dmso Per Pack , Liquid Hand Wash Solution With Dispenser ( 500Ml ) , Liquid Paraffin?: ?3.75 Ml, Magnesium Hydroxide, Milk Of Magnesia 170Ml Syp. , Liquid Soap 1Ltrsoap , Lithium -450Mg. Tab. , Lma Supreme Size ( 3, 4, 5 ) , Lomustin 40 Mg Cap. , Long 440 Mm, Battery Operated 60 Mm Articulating Endo Cutter ( 45 Degree Both Side ) With A Disposable Battery Pack, 360 Degree Rotation Shaft, 6 Row Staples Offering 60Mm Staple Line And 57 Mm Cut Line, Closed Channel Anvil, Delivering System Wide Pre Compression, ( Proximal 8 Mm, Distal 22 Mm ) , 3 Point Gap Control, Manual Override Safety Feature, Interchangeable Cartridge Options Of 1.0, 1.5, 1.8, 2.0 Closed Staple Height , Long Ergonomic ( 36Cm ) , 5Mm Laparoscopic Shears With 18Mm Curved Coated Blade, Capable Of Sealing, Vessels Up To And Including 7Mm, 360 Degrees Rotation, With Att Compatible With Gen 11 , Long Ergonomic 23Cm, 5Mm Laparoscopic Shears With 15Mm Curved Coated Blade, Capable Of Sealing Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, With Att Compatible With Gen11 , Long Term Hemodialysis Catheter Doluble Lumen 15 Fr , 19, 21, 23, 24, 28, 30, 32, 36, 40 Cm , Long Term Runnel Cuffed With Split Tip, Pre Loaded Hollow Style Hd Antimicrobialcatheter, Should Have Air Guard Valve L-23Cm. = Fr-14.5 . , Long Term Runnel Cuffed With Split Tip, Pre Loaded Hollow Style Hd Antimicrobial Catheter, Should Have Air Guard Valve L-19Cm. = Fr-14.5 . , Long-Term Heamo-Dialysis Catheter Double-Lumen Radio Opaque Split-Tip Catheter 14.5 Fr X 19 Cm With Air Guard Valves Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guide Wire 0.97 Mm X 70 Cm, Tunneled, 18 G Needle & 8 Fr Vessel Dilator , Long-Term Hemo-Dialysis Catheter Duble-Lumen Radioopaque Split-Tip Catheter 14.5 Fr X 19 Cm With Airguard Valved Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guidewire 0.97 Mm X 70 Cm, Tunneler, 18 G Needle & 8 Fr Vessel Dilator , Long-Term Hemo-Dialysis Catheter Duble-Lumen Radioopaque Split-Tip Catheter 14.5 Fr X 27 Cm With Airguard Valved Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guidewire 0.97 Mm X 70 Cm, Tunneler, 18 G Needle & 8 Fr Vessel Dilator , Loop Nylon, 0, 72, ½ Circle, Round Body , Loperamide 2Mg. Tablet , Lorazepam2 Mg / Ml1 Ml Vial , Lorazepam2 Mg / Ml2 Ml Vial , Lorezepam 4Mg. / Ml Inj. , Loteprojnal Etabnate 02%10Mleye Drop , Low Adherent Absorbent Wound Dressing With A Polyester Perforated Wound Contact Layer Size 50Cmx7mtr Roll , Low Molecular Weight Dextran 40000 Inj. , Low Pressure Cuffed Tracheostomy Canula With Sterile Disposable Or Reusable Inner Canula , Low Profile Chemo Plastic Port With Silicon Catheter, Desilet Anti Kinking Sleeves, Fr-9.6, 6.6, 3.9. . , Lp Needle16 G , Lp Shunt , Lp Shunt . , Ls Corset , Lumbar Drainage System ( Lumbar Drain ) , Lumbar Drainage System ( Lumbar Drain ) , Lumbar Puncture Needle20g , Lumber Peritonal Shunt System - Each System Is Supplied Complete With One Lumbar Catheter 40Cm Long. One Periitoneal Catheter 60Cm Long One Special Lumbar Catheter Connecters, Two Suture Collar & One 14 Gauge Thin Wall Touhey Needle. The System Is Sterilized By Ethylene Oxide Gas And Packed In Double Peel Open Packaging. . , Lung Excer Sizer. , Lutein + Zeaxanthin , Vita , C, E, S, Zinc Cap , Lutonix Drug Coated Balloon Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time035 With 120Cm Shaft: Diameter 4Mm -6Mm , Lengthupto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm / 014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Mac Intosh , Mackintosh -Size 1100Mm Width X 30 Meters Length Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr . , Mackintosh Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene. 6X12 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.7.6X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.10X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.15X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.15X30 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.30X30 Cm Sterile , Magills Forcepsadult Size , Magills Forcepspaediatric Size , Mag-Mag Oint Ointment , Magnesium Hydroxide + Aluminium Hydroxide Simethecon 250 Mg + 250 Mg + 50 Mg / 5 Ml 170 Ml Bottle ( Syrup ) , Syrup , Magnesium Sulphate25% W / V, Amp Inj. , Magnesium Suplhate Ection I.P.50 % W / V 10Ml Ampinj. , Magnesium Suplhate Injection I.P.50 % W / V ( 1 Ml Amp ) ( 1 Ml Amp ) , Ampule , Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures , Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures , Maleurethral Dilator Set; Teflon / Latex , Malecot Catheter , Malecot Catheter ( With Needele ) , Malvix Band . , Mammography Casette With Intensifying Screen 18X24 Cm 18X24cm , Management , Ce Approved., 1000 Ml , Manifold Right Off 3-Way , Mannitol Inj. 10% 350Ml Bottle ( ) , Injection Solution For , Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm*. Size- Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm. , Material Of Housingpolycarbonate ( Pc ) , Mattress Protectorshould Made Up Of Breathable And Spacer Fibers. Breathable, Antimicrobial Finish, Elastic Fit, Washable, 36 X 72 Inches, Colour White, Blue And Freen , Measure Volume Drip Set. , Meatal Dilator - Male , Mechanical Bileaflet Aortic Heart Valvemade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle Should Have Leaflet Guard Design Should Have Flared Inlet At Inflow. Sizes 19Mm, 21Mm, 23Mm, , Mechanical Bileaflet Aortic Heart Valve Bileaflet Mechanical Heart Valve Rotatable, The Material Used Is Pyrolytic Carbon On A Graphite Substrate, 80-90 Degree Opening Angle Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Mechanical Single Leaflet Aortic Heart Valvemade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle Should Have Leaflet Guard Design Should Have Flared Inlet At Inflow. Sizes- 19Mm, 21Mm, 23Mm , Mechanical Single Leaflet Aortic Heart Valve Sinlge Leaflet Tilting Disc Mechanical Heart Valve Rotatable Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Meclizine 25 Mg Tab. , Meclizine 25Mg. Tab. , Mecobalamin Jp 1000Mcg ( B12 ) , Pyridoxine Hydrochloride Ip 100Mg ( B6 ) , Nicotinamide Ip 100Mg ( B3 ) 2Ml Inj. , Medical Oxygen Central Gas Pipe Line Oxygen Outlet , Medical Oxygen Central Gas Pipe Line Vacuum Jar , Medical Oxygen Central Gas Pipe Line Vacuum Outlet , Medical Oxygen Sensor ( Oom202 ) For Ventilator , Medical Penlights , Medicast 3 , Medicated Spirit 1Ltr. Solution , Medicated Spirit 5Ltr. Solution , Medium Large Acetyl Homopolymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Medium Size ( 18X12.5X3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Medium Size ( 3.5 X 5.2Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Medium Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Medium / Large Size ( 5.5 X 8.8Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Mefenamic Acid + Drotaverine Hcl ( 250 Mg + 80 Mg ) , Tablet , Melatonin 3Mg Tab. , Menadione 10Mg / 1Ml Inj. ( Vitamin K-3 And Vitamint K ) , Meningococcal Polysaccharide Vaccine Inj. , Meningococcal Vaccine , Mercaptopurine 50Mg.Tablet , Mersilene Polyester Fibre Tap U.S.P 30Cm X 5Mm With D.A. Needle , Mesalamine 800Mg. Cap. , Methacarbamol 100 Mg. Inj. , Methotrexate 10 Mg Tab. , Methotrexate 15 Mg Tab. , Methotrexate 20 Mg Tab. , Methotrexate 5 Mg Tab. , Methotrexate 7.5 Mg Tab. , Methotrexate ( 10 Mg ) , Tablet , Methyl Cellulose Drops2%10Mleye Drop , Methyl Cellulose / Visco Elastic Pfs 2Ml Eye Drop , Methyl Prednisolone - 32 Mg Tab. , Methyl Prednisolone - 8 Mgcap. , Methyl Prednisolone ( 8Mg ) , Tablet , Methylcellulose Eye Drops , Metoclopramide- 10Mg Tab. , Metoprolol ( 5Mg / 5Ml Ampoule Injection , Metoprolol 1Mg. / Ml Inj. , Metoprolol Inj 1 Mg / Ml ( 5Ml Vial ) , Injection Solution For , Metresses 3X6 With Raxine Cover 4 Density , Metronidazole 100Mg / 5Ml Syrup ( 30Ml ) Syp. , Metronidazole 15Gm 0.01 Ointment , Miconazole 1% + Beclamethasone Dipropionate 0.025%Ointment , Miconazole Ear Drops 5Ml Eye Drop , Micro Catheter 1.8F Fine Cross / Corsier / Unirail 150Cm , Micro Drip Set With Chamber As Per Drugs Act. Specification . , Micro Laryngeal Tube- Clear Micro Laryngeal Tube Is Made Of Pvc With High-Volume Low-Pressure Cuff. Having Thinner And 360Mm Longer Length Tube Body With Smaller Diameter, Designed For Interventions In The Laryngeal Space. Clear Micro Laryngeal Tube, Has Semi-Seated Connector, Valve For Luer And Luer-Lock Syringes, Continuous X-Ray Marker And Graduated. Usfda Approved , Micro Titanium Ligation Device With Locking Mechanism, Sterile, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. , Micro Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing And Precise Tip To Tip Closure. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Microcatheter Superselective Braidedfor Avm Embolisation Super-Selective Flow Directed Braided Micro Catheter Usable Length At Least165cm With Hydrophilic Coating Used For Brain Avm Treatment. Dmso And Compatable With Item Of Sr No 5. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved. , Microcatheter Straight Endhole For Intracranial Stenting 0.027Inch Id 2.8 / 2.8F Od Compatable With 0.014 Inch Guide Wire Straight Tip Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.027 Id 2.8 / 2.8F Od Braided, 145 Cm Usable Length, Permitting 0.014“ Guide Wire Used For Intracranial Stenting, Should Be Compatable With Item Of Sr No 53 — 58. Used Forneurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight Endhole For Intracranial Stenting 0.027Inch Id 2.8 / 2.8F Od Compatable With 0.014 Inch Guide Wirestraight Tip Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.027 Id 2.8 / 2.8F Od Braided, 145 Cm Usable Length, Permitting 0.014 Guide Wire Used For Intracranial Stenting, Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight / Preshaped For Aneurysm Coiling 0.017 Inch Id 2.1 / 1.7F Od 150 Cm Length Compatable With 0.014 Inch Guide Wire Straight Tip / Preshaped 45* & 90* Endhole Single- Lumen Microtatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting0.024 Guide Wire For Intracranial Aneurysm Coiling, Should Be Compatable With Item Of Sr. No. 1, 2 & 5-45. Used For Neurovascular Purpose.Should Be Dcgiand Usfda Approved , Microcatheter Straight / Preshaped For Aneurysm Coiling 0.017 Inch Id 2.1 / 1.7F Od 150 Cm Length Compatable With 0.014 Inch Guide Wirestraight Tip / Preshaped 45* & 90* Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight / Preshpaed Foraneurysm Coiling 0.017 Inch Id 2.4 / 1.9F Od 150 Cm Length Compatable With 0.014 Inch Guide Wirestraight Tip / Preshaped 45* & 90* Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approvedmechanically / Electrically Detachable Bare Paltinum , Microcatheter Straight / Preshpaed For Aneurysm Coiling 0.017 Inch 10 2.4 / 1.9F Od 150 Cm Lengthcompatable With 0.014 Inch Guide Wire Straight Tip / Preshaped 45* & 90” Endhole Single Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7 F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Should Be Compatable With Item Of Sr. No. 1, 2 &5-45. Used For Neurovascular Purpose. Should Be Dcg I And Usfda Approved Mechanically / Electrically Oetachable Bare Paltinum , Microcatheter Superselective Braided For Avm Embolisationsuper-Selective Flow Directed Braided Micro Catheter Usable Length At Least165cm With Hydrophilic Coating Used For Brain Avm Treatment. Dmso Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved. , Microcatheter Superselective Detachable For Avm Embolisation Super-Selective High Flow Directed Micro Catheter With Detachable Tip With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Detachable For Avm Embolisationsuper-Selective High Flow Directed Micro Catheter With Detachable Tip With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Non Braided For Avm Embolisation Super-Selective High Flow Directed Non-Braided Micro Catheter Single Lumen, Endhole, Usable Length L70cm, With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Non Braided For Avm Embolisationsuper-Selective High Flow Directed Non-Braided Micro Catheter Single Lumen, Endhole, Usable Length 170Cm, With Hydrophilic Coating Used For Brain Avm Treatment, Dmso Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcoilsfor Embolization , Micronised Flavonoid Extract 500Mg Tab. , Micronized Progesterone 200 Ml Syp. , Micronized Purified Flavonoid Fraction 500Mg. Tab. , Microporesurgical Tape 3, Inch , Microporesurgical Tape 4, Inch , Microporesurgical Tape 6 Inch , Microporous Antimicrobial Fabric Tape All Size , Micropuncture Set4 F , Micropuncture Set4 Fr , Micropuncture Set 7Cm & 11Cm , Microscope Cover , Microwire For Catheter Tracking 0.014 Inch 200 Cm Length High Torque Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014 200 Cm Hydrophilic Guidewire With Torque Device For Use With Infusion Catheters Compatible With Sr No. 2. Used For Use Neurovascular Purpose, Should Be Dgci And Usfda Approved , Microwire For Catheter Tracking 0.014 Inch 200 Cm Lengthhigh Torque Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014 200 Cm Hydrophilic Guidewire With Torque Device For Use With Infusion Catheters Compatible With Sr No. 2. Used For Use Neurovascular Purpose, Should Be Dgci And Usfda Approved , Midazolam 5 Mg / Ml-Nassal Spray Nasal Spray , Mifepristone 200 Mg + Misoprostol 200 Mcg Kit Of 5 Tab , Mifepristone 200 Mg + Misoprostol 200 Mcg Kit Of 5 Tab , Milkywhite Gel Based Hand Sanitizer, Ethanol ( 60%-65%, Benzalkonium Chloride 0.09% - 1% 100Ml Gel , Milrinnone 1Mg / Ml, 10 Ml Vial ( Inj. ) , Milrinone 1Mg / Ml, 10Ml Vialsinj. , Mini Suction Drain Set , Minicap For Pd Catheter , Minoxidil Ip .....2.0% W / V In A Solution Base Ethyl Alcohol Ip Eq. To Absolute Alcohol ...60% V / V 60Mlointment , Miracle 3.0 , Miracle 6.0 , Mirage Micro Guide Catheter , Mirage Micro Guide Wire , Miscellanous Tablets , Misoprostol- 200Mcgtab , Mist Blowerwith Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery With Malleable Shaft , Mist Blower With Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery With Malleable Shaft , Mitrazapine-7.5Mg. Tab. , Mmr-Vialinj. , Mobile And Single Use Negative Pressure Wound , Modafinil 100Mg. Tab. , Moderate Indwelling Pur Catheter With 70%Isopropyl Alcohol Cap For Peripheral Veins With Siliconized Additional Port. . Sterilized . , Molded Cup Style Surgical N-95 Respirator Mask -Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified , Monifilament Polyamide3-0, 70-75Cm , 24-26Mm, 3 / 8 Circle, Reverse Cutting, , Monifilament Polyamide 2-0 75Cm , 39Mm, 3 / 8 Circle, Reverse Cutting, , Mono Components Insulin 5Mg. Inj. , Mono J Stent , Monofilament Black Polyamide Non Absorable Suture Usp Size 0 40Mm, 1 / 2 Circle Heavy Rb, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 48Mm, 1 / 2 Circle Heavy Rb Loop, 150Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 48Mm, 1 / 2 Circle Heavy Rc, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 4Mm, 3 / 8 Circle Rb Micro Point, 25Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point Da, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 90Mm, 3 / 8 Circle Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 / 0 45Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 / 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 10Mm, 3 / 8 Circle Rc, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 19Mm, 3 / 8 Circle Cutting Pc-5, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 19Mm, 3 / 8 Circle Prime Cutting Pc-5, 60Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 13Mm, 3 / 8 Circle Prime Rc P-3, 60Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Prime Cutting, 35Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 6 / 0 10Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 6 / 0 13Mm, 3 / 8 Circle Prime Cutting Pc-5, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 8 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point, 38Cms , Monofilament Glycomer3-0 75Cm, Undyed19mm3 / 8 Circlereverse Cutting , Monofilament Glycomer3-0 75Cm, Undyed19mm3 / 8 Circlereverse Cutting ( Preferably Us Fda Aproved ) , Monofilament Glycomer3-0 75Cm, Violet26mm1 / 2 Circletaper Point , Monofilament Glycomer3-0 75Cm, Violet26mm1 / 2 Circletaper Point ( Preferably Us Fda Aproved ) , Monofilament Glycomer 631* 0 75Cm, Undyed37mm1 / 2 Circlereverse Cutting , Monofilament Glycomer 631* 0, 90Cm, Violet40mm1 / 2 Circletaper Point , Monofilament Glycomer 631* 1 , 90Cm, Violet40mm1 / 2 Circletaper Point , Monofilament Glycomer 631* 2-0 75Cm, Undyed37mm1 / 2 Circlereverse Cutting , Monofilament Glycomer 631* 2-0 75Cm , Violet26mm1 / 2 Circletaper Point , Monofilament Polyamide * 1 100Cm, Black40mm1 / 2 Circletaper Point , Monofilament Polyglyconate* Cv 5-0 75Cm , Green13mm1 / 2 Circletaper Point , Double Arm , Monofilament Polyglyconate* Cv 5-0 75Cm , Green13mm1 / 2 Circletaper Point , Double Arm ( Preferably Us Fda Aproved ) , Monofilament Polypropylene Mesh With Bioresorbable Polyglycolic Acid Fibers & Hydrogel Coating , Hydrogel Barrier To Minimize Tissue Attachment, Bioresorbable Coating = Sodium Hyaluronate ( Ha ) Carboxymethylcellulose ( Cmc ) , And Polyethylene Glycol ( Peg ) , Ability To Tailor ( Can Easily Be Cut To Customize Shape And Size ) Various Sizes , Monofilament Stainless Steel 2 5X45cm, 40Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 4 2X45cm, 48Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 5 2X75cm, 45Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 5 4X45cm, 48Mm1 / 2 Circleconventional Cutting , Monofilament Stainless Steel 6 2X45cm, 45Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 6 4X45cm, 48Mm1 / 2 Circleconventional Cutting , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 14Cms X 14Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 24Cms X 24Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 30Cms X 30Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1-0 36Mm, 1 / 2 Circle Tp Da 14Cms X 14 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1-0 36Mm, 1 / 2 Circle Tp Da 24Cms X 24 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 2-0 36Mm, 1 / 2 Circle Tp 20 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 2-0 36Mm, 1 / 2 Circle Tp 30 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 40Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 45Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 50Mm, 1 / 2 Circle Rb Heavy Loop 150Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 2 / 0 31Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 3 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 4 / 0 16Mm, 3 / 8 Circle Rc 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 4 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 5 / 0 13Mm, 3 / 8 Circle Tp Da 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 5 / 0 16Mm, 3 / 8 Circle Rc 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 6 / 0 11Mm, 3 / 8 Circle Rb Da 45Cms Dyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 6 / 0 13Mm, 3 / 8 Circle Cc Pc1 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 7 / 0 9.3Mm, 3 / 8 Circle Tp Da 70Cms Violet , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 0 30Mm, 1 / 2 Circle Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Prime Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 26Mm, 1 / 2 Circle Angiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 60Mm, Straight Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Rc, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Prime Rc Ps-3, 45Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 1 40Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 1 50Mm, 1 / 2 Circle Rb Heavy Loop 150Cms Violet 65Mm & 122Cms , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 2 / 0 31Mm, 1 / 2 Circle Rb 70Cms Violet 26Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 3 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 3 / 0 30Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 4 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 2 / 0 26Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 2 / 0 30Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 3 / 0 25Mm, 3 / 8 Circle Prime Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 3 / 0 26 Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 4 / 0 16 Mm, 3 / 8 Circle Rc, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 5 / 0 16 Mm, 3 / 8 Circle Rc, 70Cms Undyed , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Heavy Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 30Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 30Mm, 1 / 2 Circle Heavy Tc , 100Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 45Mm, 1 / 2 Circle Heavy Rc , 100Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 22Mm, 1 / 2 Circle Cutting, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 1 / 2 Circle Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Cutting Pc-3, 60Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Cutting Pc-3, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb Da, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 6 / 0 13Mm ( 282 Microns ) , 3 / 8 Circle Rb Da, 102Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 6 / 0 15Mm, 3 / 8 Circle Cutting Pc-3, 70Cms , Monopolar Cautery Forceps , Morphine Sulphate 1 Ml / Amp Inj. , Morphine Sulphate 20Mg. Tablet , Moxifloxacin Ophthalmic Solution Usp 0.5% Pfs 1. Solution , Moxinidine 100Mg. Tab. , Mpff, 450 Mg Diosmin Plus 50 Mg Hesperidin , Mri Implantable Port With Close-Ended Attachable Groshong Silicone Catheter 8 Fr, J Tip Guide Wire 0.89Mm X 45Cm, 18G Introducer Peel-Apart Sheath 8 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Port With Open-Ended Attachable Hickman Silicone Catheter 9.6 Fr, J Tip Guide Wire 0.97Mm X 50Cm, 18G Introducer Peel-Apart Sheath 10 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Port With Open-Ended Pre Attached Hickman Silicone Catheter 6.6 Fr, J Tip Guide Wire 0.97Mm X 50Cm, 18G Introducer Peel-Apart Sheath 7 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Power Port With Close-Ended Attachable Groshong Silicone Catheter 8 Fr, J Tip Guide Wire 0.89Mm X 45Cm, 18G Introducer Peel-Apart Sheath 8 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mucopolyssacharide Polysulfate ( Heparinoid ) Corresponding To 250 Iuointment , Mucus Extator . , Multi Vitamin Syrup 200Ml Syp , Multiband Trigger ( Gi Band ) . , Multifiltrate Dialysate Line ( 158 Ml ) Compatible With Multifiltrate Machine , Multifiltrate Substitute Line -1 Heater Bag ( Cvvhd / Cvvhdf=159 Ml ) Compatible With Multifiltrate Machine , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Aerosol Mask, Bipap, Cpap Mask With 7 Oxygen Tube. Fda Approved. ( Adult ) , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Aerosol Mask, Bipap, Cpap Mask With 7 Oxygen Tube. Fda Approved. ( Paediatric ) , Multiple Perfusion Set Withpressure Monitoring Lines;Multiport Tip / Integral Stopcock.Femaleluer On Single Inlet With 4 Legs. 7.6 Cm Length Leg With Wide Clamps. , Multiside Pore Catheter / Spary5 Fr , Multivitamin Syrup 60 Ml ( Each 5Ml Contains-Vitamin A ( Palmitate ) Ip 1600 Iu+Vitamin D3 Ip 200 Iu ( +Vitamin B2 Ip 1.00Mg+Vitamin B6 Ip 0.50Mg+Niacinamide Ip 15.00Mg+D-Panthenol Ip 1.00Mg ) , Syrup , Mupriocin 2% + Beclomethasone Diprop. .025%Ointment , Mycophenolate 1000 Mg Tablets , Mycophenolate 720 Mg Tablets , N.G.Tube 5, 6, 7, 8, 10 . , Nadifloxacine Ointment 15 Gmointment , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 10Cm.X10cm , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 10Cm.X20cm. , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 5Cm.X5cm. , Naproxen Sodium 500Mg. Tab. , Nasal Prongs Adult Size , Nasal Prongs Paediatricssize , Naso Biliary Drinage , Naso Billary Drain Catheter 10 Fr , Nasogastrictube { Fr ) 10Fr , Nasogastrictube { Fr ) 12Fr , Nasogastrictube { Fr ) 14Fr , Nasogastrictube { Fr ) 16Fr , Nasogastrictube { Fr ) 8Fr , Nasogastric Tubes ( Ng Tube ) Size -14, 16, 18. , Nasogastric Tubes ( Ng Tube ) Size -5, 6, 7, , Nasogastric Tubes ( Ng Tube ) Size -8, 10, 12, , Nasopharyngealairway5mm , Nasopharyngealairway5mm, 6Mm, 7Mm, 8Mm , Nasopharyngealairway 6Mm , Nasopharyngealairway 7Mm , Nasopharyngealairway 8Mm , N-Butyl-2Cyanoacrylate 0.25Ml / Unit Each Mesh , Nebulization Full Kit ( Adult ) As Per Drugs Act. Specification , Nebulization Full Kit ( Pediatrics ) As Per Drugs Act. Specification , Nebulizinginhalation Cap.Inhaler , Needle Burner & Syringe Destroyer , Needle Knife Sphincterotome , Needle Of Nerve Locator ( Length 100Mm ) . , Needle Of Nerve Locator ( Length 150Mm ) . , Needle Of Nerve Locator ( Length 25Mm ) . , Needle Of Nerve Locator ( Length 50Mm ) . , Nekethamide Amp Inj. , Neomycin + Polyxmycin ( Nevasulf ) 10Gm. Powder , Neomycine1700 Iu5 Gm. Ointment , Neosporin + Dexamethasone 10 Gm. Ointment , Neosporin 10 Gm. Powder , Neosporin 5Gm.Eye Ointment , Neosporin Ear Drop+ Hydrocortisone Ear5ml Eye Drop , Neosporin Ear / Eye Drop 5Ml Eye Drop , Neostigmine 2.5Mg / 5Ml5 Ml Ampoule Injection , Neostigmine ( 0.5Mg / Ml ( 1Ml Amp ) , Injection , Nephazoline 5Ml Eye Drop , Nephrostomy Tube , Nerve Locator Needle ( 5Cm, 10Cm ) 5Cm , 10 Cm , Nicorandil 2Mg / Ml Vial Injection , Nicorandil 5 Mg Tab. , Nicotinamide ( 20 Mg ) + Riboflavin ( 5 Mg ) + Clavulanic Acid ( 125 Mg ) + Phosphate ( 0.6 Mg ) + L-Ornithine L-Aspartate ( 250 Mg ) 60Ml Syp. , Nifedipine- 5Mg Tab. , Nifedipine - 10Mg Tab. , Nifedipine 0.3% W / W + Lidocaine 1.5% W / W In Organogel Basecream , Nimodipine 20Mg / Vial Injection , Nimodipine 60 Mg Tablets , Nitroglycerine Patch 5 Mlointment , Nitrous Regulater With Tubing Set , Niv Mask ( Full Face ) . , Niv Mask ( Medium ) . , Non - Sterile Examination Latex Gloves Long Couf6, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf6.5, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf7, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf7½, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf8isi Mark . , Non - Sterile Surgical Latex Gloves6, Isi Mark . , Non - Sterile Surgical Latex Gloves6.5, Isi Mark . , Non - Sterile Surgical Latex Gloves7, Isi Mark . , Non - Sterile Surgical Latex Gloves7½, Isi Mark . , Non - Sterile Surgical Latex Gloves8 Isi Mark . , Non Absorbable 3 / 8 Circle, 9.3 Mm Polypropyleneblue 6-0, Round Body, Tungsten-Rhenium’S Needle, Cc Double ( 220 Microns ) Double Needle Monofilament 60 Cm , Non Absorbable 3 / 8 Circle, 9.3 Mm Polypropyleneblue 6-0, Taper Point, Bv-1, Tungsten-Rhenium’S Needle, Double Needle Monofilament 60 Cm , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate Coated With Polyster Braided Greenwith Size 5, 1 / 2 Circle Taper Cutv-55, 55Mm Braided 75 Cm, 4 Suture Per Foil ) , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate Coated With Polyster Braided Green Size 4-0 1 / 2 Circle Taper Cut 2 X V-5Double Needle 17Mm, 90Cm , Non Absorbable Surgical Suture, ( Synthetic ) Monofilament Polypropylene Blue, Prolene Size 2-0 1 / 2 Circle V-7 Tapercut Double Needle 26Mm , Non Absorbable Surgical Suture, ( Synthetic ) Monofilament Polypropylene Blue, Prolene Size 5-0 1 / 2 Circle R.B. ( 320 Microns ) 13Mm, Double Needle, Pledgets 3Mm X 3Mm X 1.5 Mm 60Cm , Non Alcohol, Aqueous Base Hand Sanitizer, Benzethonium Chloride Usp 0.2% 100Ml. Solution , Non Alcohol, Aqueous Base Hand Sanitizer, Benzethonium Chloride Usp 0.2% 500Ml. Solution , Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cm. Size- Diameter ( 5Mm To 12Mm ) & Lengths ( 2, 4&6Cm ) . , Non Ionic Contrast Media 300 Mg. 10 Ml.Inj. , Non Ionic Contrast Media 350 Mg. 20 Ml.Inj. , Non Shrinkable Polyurethane Material Iv Line For Long Term Iv Therapy, Should Have Infection Control Device Filled With Isopropyl Alcohol Xro, Siliconized Non Return Valve . , Non-Absorbable Polymer Locking Clips Provide Cool Secure Ligation; Clip Locks Onto The Vessel. Clip Sizes Medium, Medium-Large, Large And Extra-Large. The Non-Absorbable Polymer Clip Is Inert, Nonconductive, Radiolucent, And Does Not Interfere With Ct Or X-Ray Diagnostics. Us Fda Approved , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001t Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001vs Size : 4-0, 3 / 8 Circle Cutting 16Mm, 90Cms 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5002 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5003 Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5004 Size : 0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5005 Size : 1, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5006 Size : 2, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5011 Size : 1, 1 / 2 Circle Tc 30Mm, 110Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5017 Size : 0, 3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5028 Size : 3-0, 3 / 8 Circle R C, 26Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5028t Size : 3-0, 3 / 8 Circle R C, 26Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5029 Size : 6-0, 3 / 8 Circle R B, 13Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036 Size : 2-0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036a Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036at Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036t Size : 2-0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037 Size : 0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037a Size : 0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037t Size : 0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5049 Size : 4-0, 1 / 2 Circle R B, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5052 Size : 2-0, 1 / 2 Circle R C, 50Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5061pcm Size : 4, 1 / 2 Circle Rb 35Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5062 Size : 1, 3 / 8 Circle Cutting, 60Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5063 Size :1, 1 / 2 Circle Rb 40Mm, Heavy, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5070 Size : 3-0, 1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5080 Size : 5-0, 3 / 8 Circle R C, 12Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5082 Size : 4-0, 3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5083 Size : 3-0, 1 / 2 Circle R B, 35Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5085 Size ; 3-0, 1 / 2 Circle Rb 25Mm, 90Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5086 Size : 4-0, 1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5087 Size : 3-0, 1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5090 Size : 5-0, Straight R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5096 Size : 5-0, 3 / 8 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5098 Size : 5-0, 1 / 2 Circle T C, 17Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5290 Size : 2-0, Straight Cutting, 60Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5332n Size : 3-0, 1 / 2 Circle Rb 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5333 Size : 2-0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5333t Size : 2-0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5334 Size : 0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5334t Size : 0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5335 Size ; 0, 3 / 8 Circle Rb 25Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5610 Size : 2-0, 1 / 2 Circle T C, 17Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5670 Size : 2-0, 1 / 2 Circle T C, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 617 Size : Green 2-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 617A Size : White 2-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 625 Size : Green 3-0, 1 / 2 Circle R B Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 632 Size : Green 3-0, 1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 635 Size : Green 4-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 636 Size : Green 3-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 637 Size : Green 2-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 637A Size : White 2-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 640 Size : Green 4-0, Sraight Cutting Da, 53Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 643 Size : Green .2, 1 / 2 Circle T C Heavy, 45Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 645 Size : Green 5, 1 / 2 Circle T P Heavy, 55Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 652 Size : Green 3-0, 1 / 2 Circle R B Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 669 Size : Green 3-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 672 Size : Green 4-0, 3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 677 Size : Green 2-0, 1 / 2 Circle T C Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 677A Size : White 2-0, 1 / 2 Circle T C Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 679 Size : Green 0, 1 / 2 Circle R C , 50Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 680 Size : Green1, 1 / 2 Circle R C , 50Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687 Size : Green 2-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687A Size : White 2-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687L Size : White2-0, 1 / 2 Circle Taper Cut, Double Arm26mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 690 Size : Green 5-0, 3 / 8 Circle R B Da, 12Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 691 Size : Green 4-0, 3 / 8 Circle R B Da, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 695 Size : Green 4-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 696 Size : Green 5-0, 3 / 8 Circle R B Da, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3303 Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3304 Size : 0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3305 Size : 1, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3306 Size : 2 , 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3315 Size : 5-0, 3 / 8 Circle Cutting, 16Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3317 Size : 5-0, 3 / 8 Circle R C, 12Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3318 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3318S Size : 4-0, 3 / 8 Circle Cutting 16Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3321 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3326N Size : 4-0, 3 / 8 Circle Cutting, 10Mm, 38Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328 Size : 3-0, 3 / 8 Circle R C, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328A Size : 3-0, 3 / 8 Circle R C, 26Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328At Size : 3-0, 3 / 8 Circle R C, 26Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328T Size : 3-0, 3 / 8 Circle R C, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 6-0, 3 / 8 Circle Cutting, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 7-0, 3 / 8 Circle Cutting, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 8-0, 3 / 8 Circle Cutting, 13Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336 Size : 2-0, 3 / 8 Circle R C, 45Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336A Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336At Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336Dk Size : 2-0, 3 / 8 Circle R C, 45Mm, 110Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336T Size : 2-0, 3 / 8 Circle R C, 45Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3338 Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3338A Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 45Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3340 Size : 0 ( Loop ) , 1 / 2 Circle R B , 40Mm, 150Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3346 Size : 0, 1 / 2 Circle R B Heavy, 40Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3348 Size : 1 ( Loop ) , 1 / 2 Circle R B Heavy , 50Mm, 150Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3388 Size : 3-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3389 Size : 0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3390 Size : 2-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 9038 Size : 8-0, 1 / 2 Circle Cutting, 7Mm, 30Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 9038 Size : 8-0, 1 / 4 Circle Cutting, 6.5Mm, 30Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 18 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2070Lp Size : 7-0, 3 / 8 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2076Lp Size : 7-0, 3 / 8 Circle T P D A, 6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2078Lp Size : 7-0, 3 / 8 Circle T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2078S Lp Size : 7-0, 3 / 8 Circle T P D A, 8Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2079L Lp Size : 7-0, 3 / 8 Circle T P D A, 9.7Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2079Lp Size : 7-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2086Lp Size : 8-0, 3 / 8 Circle T P D A, 6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2087Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2088L Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2088Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 805 Size : 0, 1 / 2 Circle T C, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 806 Size : 2-0, 1 / 2 Circle T C, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 807 Size : 2-0, 1 / 2 Circle T C, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8121B Lp Size : 7-0, 3 / 8 Circle Antiglare T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204 Pl3 Size : 4-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204 Size : 4-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204Vs Size : 4-0, 1 / 2 Circle Rb 13Mm Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8205Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8207 Pl3 Size : 6-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8207Lp Size : 6-0, 1 / 2 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 822 Size : 3-0, 1 / 2 Circle R B Da, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 823 Size : 6-0, 3 / 8 Circle Slim Blade Cutting, 15Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 825 Size : 3-0, 1 / 2 Circle R B, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 829 Size : 6-0, 3 / 8 Circle R B Da, 13Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 830 Size : 0, 1 / 2 Circle R B ( Heavy ) , 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8304B Lp Size : 7-0, 3 / 8 Circle Antiglare T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8305B Lp Size : 6-0, 3 / 8 Circle Antiglare T Pd. A., 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8307B Lp Size : 6-0, 3 / 8 Circle Antiglare T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8321B Lp Size : 5-0, 3 / 8 Circle Antiglare T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 835 Size : 4-0, 1 / 2 Circle T C Da, 17Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 838 Size : 3-0, 1 / 2 Circle R B, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 840 Size : 1, 1 / 2 Circle R B ( Heavy ) , 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 840A Size : 1, 1 / 2 Circle R B ( Heavy ) , 30Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 841 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 842 Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 842T Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843 Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843A Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 35Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843T Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 849 Size : 4-0, 1 / 2 Circle R B, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8521 Size : 4-0, 1 / 2 Circle T P D A, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8522 Size : 3-0, 1 / 2 Circle T P D A, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8526 Size : 2-0, 1 / 2 Circle T P D A, 30Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 853 Size : 4-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8556 Pl3 Size : 5-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8556Lp Size : 5-0, 1 / 2 Circle T P D A, 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8557 Size : 4-0, 1 / 2 Circle T P D A, 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 857 Size : 4-0, 1 / 2 Circle Tc 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Lp Size : 5-0, 1 / 2 Circle T P D A, 10Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Mlp Size : 5-0, 1 / 2 Circle Tp 10Mm Da, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Slp Size : 5-0, 1 / 2 Circle Tp 10Mm, Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Spl3 Size : 5-0, 1 / 2 Circle Tp 10Mm, Da, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8611Lp Size : 6-0, 1 / 2 Circle T P D A, 10Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8612Lp Size : 6-0, 3 / 8 Circle R C, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8613Lp Size : 6-0, 1 / 2 Circle T P D A, 13Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8614B Lp Size : 8-0, 3 / 8 Circle Antiglare T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 867 Size : 4-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 870 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8702Lp Size : 7-0, 3 / 8 Circle T P D A, 9.7Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8703Lp Size : 8-0, 3 / 8 Circle Rb, Cc Needle 9.3Mm, Da , 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710 Pl3 Size : 5-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 13Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710S Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8725B Lp Size :6-0, 3 / 8 Circle Antiglare Tp 13Mm, Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726Lp Size : 6-0, 3 / 8 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726M Lp Size : 6-0, 3 / 8 Circle T P D A, 12.3Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726S Lp Size : 6-0, 3 / 8 Circle T P D A, 13Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8727Lp Size : 6-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8731Lp Size : 7-0, 3 / 8 Circle T P D A, 6.5Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8732Lp Size : 8-0, 3 / 8 Circle T P D A, 6.5Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8735Lp Size : 7-0, 3 / 8 Circle T P D A, 7.6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8741Lp Size : 8-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 878 Size : 6-0, 3 / 8 Circle R C, 12Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 878Vs Size : 6-0, 3 / 8 Circle Rc, 12Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 879 Size : 4-0, 3 / 8 Circle R C, 12Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 880 Size : 5-0, 3 / 8 Circle R C, 12Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804L Lp Size : 6-0, 3 / 8 Circle T P D A, 10Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804Lp Size : 6-0, 3 / 8 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804Vs Lp Size : 6-0, 3 / 8 Circle Rb 10Mm Da, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8805 Lp Size : 6-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8805M Lp Size : 6-0, 3 / 8 Circle T P D A, 9.7Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8806Lp Size : 6-0, 3 / 8 Circle T P D A, 9Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 880Vs Size : 5-0, 3 / 8 Circle Rc, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 881 Size : 5-0, 3 / 8 Circle R B, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 882 Size : 5-0, 3 / 8 Circle R B Da, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 883 Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8832 Size : 3-0, 1 / 2 Circle T P, 26Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 883Mb Size : 1, 1 / 2 Circle Rc Heavy, 40Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 887 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 888 Size : 3-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8935 Pl3 Size : 4-0, 1 / 2 Circle T C ( Pledget 3Mm X 3Mm X 1.5Mm ) , 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8935 Size : 4-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 S Size : 3-0, 1 / 2 Circle Tc 17.5Mm Single Arm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 Sa Size : 3-0, 1 / 2 Circle Tc 17.5Mm, Single Arm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 Size : 3-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8937 Size : 2-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 894 Size : 0, 1 / 2 Circle T C Heavy , 30Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 896 Size : 1, 1 / 2 Circle T C Heavy , 30Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8976 Size : 3-0, 1 / 2 Circle T C Da, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8977 Size : 2-0, 1 / 2 Circle T Cda, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8977L Size : 2-0, 1 / 2 Circle T C Da, 26Mm, 150Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 898 Size : 2-0, 1 / 2 Circle T C Da, 17Mm, 70Cm 1 Foils , Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate ) . It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Size - 5 , Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate ) . It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Size- 2 , Non-Pvcdeph With Micro Needle For Ntg . , Norfloxacin 400 Mg + Lactic Acid 120 Million Spores Tab. , Norfloxacin 400 Mg + Tinidazole 600 Mg + Lactic Acid Bacillus 120 Million Spores Tab. , Norfloxacine Suspension 30Ml ( 30 Ml Bottle ) Syp. , Nylon 2-0 Cutting Body , Nylon 3-0 Cutting Body , O.P.N.C. Ballooncomplete Sizes Sequence , O.P.N.C. Balloon Inflation Device , O2 Regulatore With Tubing Set , Octreotide Lar 30Mg Injection , Oestrogenointment , Ofloxacin 200Mg +Tinidazole 600Mg Tab , Ofloxacin With Dexamethasone0.3 %+0.1%5 Ml. Eye Drop , Ofloxacine + Betamethasone Eye Ointment. 5Gm Ointment , Ofloxacine Eye Ointment.Ointment , Olanzapine 10 Ml Inj. , Olmesartan Medoxomil Bp 20Mg, Amlodipine Besilate Ip, Equivalent To Amlodipine 5Mg, Hydrochlorthiazide Ip 12.5Mg, Colours: Ferric Oxide Usp-Nf ( Yellow ) And Titanium Dioxide Ip Tab. , Olopatadine 0.5% 5Ml Eye Drop , Omega 3 Fatty Acidffs Bottle 50Ml Iv , Omega 3 Fatty Acid Concentration Iv. , Ommaya Reservoir Pediatric Size , Ommaya Reservoiradult Size ( Large ) , Ommaya Reservoirpediatric Size , Onabotulinumtoxina 50Iuinj. , One Action Stent Introduction System , One Vial Each Of Bac2 ( 50-90 Mg / Ml Fibrinogen ) And Thrombin ( 800-1200 Iu / Ml Human Thrombin ) Frozen Solutions ( 1Ml ) , One Vial Each Of Bac2 ( 50-90 Mg / Ml Fibrinogen ) And Thrombin ( 800-1200 Iu / Ml Human Thrombin ) Frozen Solutions ( 2Ml ) , One Vial Of Bac 2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved.Sizes- A- 8 Inch In Size With Curved For Ml / L / Xl. B- 11 Inch In Size With Right Angle 70° , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved. Sizes- 6 And 8 , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Containing An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 10 X10 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 12 X 15 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 15 X 20 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 15 X 25 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 20 X 30 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 25 X 36 Cm , Ophthalmic Irigation Solution 500 Ml.. Solution , Optically Guided Bladeless 12 Mm Trocar With Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal, 100Mm Length. , Optically Guided Bladeless 5 Mm Trocar With Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal, 100Mm Length. , Optional Ivc Filter With One Piece Nitinol Body, Electropolished Conical Shaped Designwith Dual Level Filtration Having Both Caudal And Cranial Migration Resistant With Anchors Benefit With Highly Visible Snare Tip Seamlessly Welded To The Body For Easy Filter Retrieval Even After Long In-Dwell Times. Gives You Both Femoral And Jugular Approaches. Size- Femoral & Juglar , Oral Airways Black , Oral Airways Blue , Oral Airways Blue, Black, White, Green Orange , Yellow, Red , Oral Airways Green , Oral Airways Orange , Oral Airways Red , Oral Airways White , Oral Airways Yellow , Orinidazole Ffs Bottle 100Ml Iv , Oseltamivir H1 N1 Antiviral Cap 40 Mg Tab. , Oseltamivir H1 N1 Antiviral Cap 80 Mg Tab. , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tipflanged, Radiopaque Basket Tips / Soft Tips With 45 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tipflanged, Radiopaque Basket Tips / Soft Tips With 90 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Flanged, Radiopaque Basket Tips / Soft Tips With 45 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Flanged, Radiopaque Basket Tips / Soft Tips With 90 Degree Angle Tip , Oxcabazepine 300 Tab. , Oxcabazepine 450 Tab. , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 2X 14 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 2X 3 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 4X 8 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 6X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7 Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size -4X4, . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7 Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size - 1X2, . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size 4X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Wovenmaterial, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda Size 4X4 Inch , Oxidized Regenerated Cellulose, Based Topical Absorbable Hemostat Structured Non-Woven Material With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures- 1X 2 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Based Topical Absorbable Hemostat Structured Non-Woven Material With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures- 2X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 1X 1 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 1X 3.5 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 3X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 6X 9 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 1X3.5Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 3X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 1X1 Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 6X 9Approved By Us Fda , Oxygen Aerosol Mask ( Pediatrics Size ) . , Oxygen Catheter10no. . , Oxygen Catheter2no. . , Oxygen Catheter4no. . , Oxygen Catheter6no. . , Oxygen Catheter8no. . , Oxygen Centar Gas Pipe Line Oxygen Flow Meter Full Set With Ce - Certification ( ??? ?????? ?? ?? ?? ?? ????? ??? ???? ????? ??? ?? ?????? ???? ????? ?? ????? ?????? ???? ?? ?????? ???? ????? ???? ????? ?? ???? ?? ???? ??? ) ???????????? ?? ?????????? ??? ??????? ??????? Point ?? Flow Meter ??? ?? ??? ?? ?? ???? ????? Point ?? Flow Meter ??? ???? ?? ???? ???? ?????? ?? ?????? ???? ???? ???????? , Oxygen Flow Meter With Adjustment Valve Full Set Iso Certifide , Oxygen Mask Adult ( Standard Size ) . , Oxygen Mask Peadiatrics ( Standard Size ) . , Oxygen Mask With Tubing Set All Size , Oxygen Nasal Cannula ( Child ) . , Oxygen Nasal Cannula ( Infant ) . , Oxygen Outlet , Oxygen Regulater With Tubing Set , Oxymetazole Nasal Drops10mleye Drop , Oxymetazoline Nasal Drop 0.25% 10Mleye Drop , Oxymetazoline Nasal Solution Solution , Oxytetracycline Hcl 10 Mg. / Gm5 Gm. Ointment , P.O.P Bandage 4, , P.O.P Bandage 6, , Paediatric - Double Lumen Catheter, 4.5Fr Full Set With Rolleson Syringe. , Paediatric - Triple Lumen Catheter, 5.5 Fr Full Set With Rolleson Syringe. , Paediatric Adjustable Collar For Extrication:- Paediatric One-Piece Immobilisation Device With 12 Precise Setting In One , Collar Suitable To Different Neck Sizes, Dimensions: 56 X 18 X 1.5 Cm, Radio Translucent, Cat Mri Compatible. Iso Certified , Paediatric Arterial Cannulae , For Arch Cannulation.Dlp Pediatric One Piecearterial Cannulae. Vented ¼ Inch Connector With Bluehub, Sizes- 10, 12 , 14, 16 , Paediatric Drip Set. , Paediatric Epidural Setset , Paeditrics Oxygenatorspriming Volume Maximum Should Be Less Than 50Ml.Minimum Operating Volume Approx. 30 Ml • Maximum Blood Flow Rate Should Be 0.2-1.2.Ltrs / Min.• Oxygen Transfer Should Not Be Less • Oxygen Transfer Should Not Be Lessthan 250Ml / Min.• Heat Exchange Efficiency Should Not Be Less Than 0.65.Surface Areaof The Fibers Should Be Approx0.8 To 1.0M2 . • Heat Exchanger Fibre Material Should Be Made Of Polyurethane [ Tpu ] And Surface Area Should Be Approx. 0.22-0.50M2 . Blood Inlet Port 3 / 8 Blood Outlet Port 1 / 4Cardioplegia Port 1 / 4 Gas Inlet Port 1 / 4 Gas Outlet Port 1 / 4Water Port 1 / 2 Maximum Pressure Blood Inlet 1000Mmhg, Water Inlet 42 Psi • Blood Storage Capacity Of Hard Shellreservoir Should Be Max 3000Ml.• Minimum Operative Volume Of Hard Shell Reservoir Should Be 150Ml. , Pancreatic Stent 4 Fr - 7 Cm Length , Pancrunium10 Mg 5 Ml Inj. , Pancuronium 4Mg / 2Ml Ampoule Injection , Pancuronium2 Mg / Ml Inj. , Papain Enzyme Ip _> 481 / Mg Tu Of Activity 5% ( W / W ) + Urea 5% ( W / W ) , Silk Protein Hydrolysate 0.5% Emulsfier Qs 25G. , Papaverine 20Mg / Ml Ampoule Injection , Para Amino Benzoic Acid 100 Mg Biotin 5 Mg Zinc 25 Mg Calcium Pantothrnate 100 Mg Nicinamide 30 Mg Acetyl Cysteine 100 Mgtab1. Tab. , Paracetamolsuppository 160 Mg , Paracetamol 100 Mg / Ml, 150 Ml Drop ( 150 Ml ) , , Paracetamol 75 Mg / Ml ( 10 Ml Inj ) , Injection , Paracetamol Drop 15Ml Eye Drop , Paracetamol Suppositry 125Mg, ( 1X5 Cap ) , Paracetamol Suppositry 250Mg ( 1X5 Cap ) , Paracetamol Syrup / Suspension 125 Mg / 5Ml ( 60Ml Bottle ) Syp. , Paraffin Gauze ( One Box Of 20 Pcs ) Box , Paraffin Liquid ( Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Ml ) - Syrup , Parcaine Surface Anesthetic. Solution , Partially Absorbale Intraperitonial Umbilical Hernia Patch With Positioning Pockets, Straps.Pod Sorbaflex Memory Ring, With One Side Light Weight Polypropylene Mesh And A Unique Hydrogel Based Barrier On The Other. Size 6.4 Cm Circle , Partially Absorbale Intraperitonial Umbilical Hernia Patch With Positioning Pockets, Straps.Pod Sorbaflex Memory Ring, With One Side Light Weight Polypropylene Mesh And3a Unique Hydrogel Based Barrier On The Other. Size 4.3 Cm Circle , Patch Buprenorphine ( 20Mcg ) , Consumable , Patient Roller And Transfer Board , Pcn Set, 12Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcn Set, 14Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcn Set, 16Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcnl Alken Metal Dilators With Central Rod , Pcnl Basket , Pcnl Initial Puncture Needle; 18G, 15Cm , Pcnl Initial Puncture Needle;18G, 20Cm , Pcnl Nephrostomy Tube; 20 Fr 40 Cm , Pd ( Peritoneal Dialysis ) Catheter Adult , Pd ( Peritoneal Dialysis ) Catheter Pediatric , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cm , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cmtulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Pediatricarterial Filter Withbypass Loopthe Arterial Filter Should Be For Pediatric Use. Priming Volume Should Not Be More Than 90Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or ¼. The Filtershould Allow Maximum Blood Flow Rate Of 4.0 To 5.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Pediatric Arterial Filter With Bypass Loopthe Arterial Filter Should Be For Pediatric Use, Priming Volume Should Not Be More Than 90Ml, Filter Pore Size Should Be 30- 40 Micron, The Outlet And Inlet Blood Ports Should Be 3 / 8 Or 1 / 4 Inch, The Filtershould Allow Maximum Blood Flow Rate Of 4.0 To 5.0 L / Min, Thefilter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Pediatrics Endotoxin 0.22 Micron, Triple Layer 96 Hour Iv Filter . , Peg Set , Pegylated + L-Asparginase 3750Iu / 5Ml-Pfs Inj. , Penile Clamp , Pentoxifylline Tab. , Pentoxiphylline 20 Mg / Ml Inj. , Per Cuteneous Endscopic Gasrostomy Tube , Percutaneoustransluminalvalvuloplasty Super Thin Coaxially Constructed , Percutaneous Endoscopic Gastrostomy ( Peg ) Tube Full Set , Percutaneous Nephrostomy ( Pcn ) Catheter With Needle All Size , Percutaneous Nephrostomy Kit Containig Guidewire, Dialators-5 Pigtail Catheter Size- 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 30Cm. , Percutaneous Pigtail Nephrostomy Catheter Sizes-5F, 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 30Cm. , Percutaneous Pigtail Superapubic Catheter Set Containing Pigtail Catheter, S.S. Trocar Needle And Introducer Size- 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 22Cm. , Percutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers ( 2.3Mm ) B- Clutch Thumb Grip Graspers ( 2.3Mm ) C- Babcock Thumb Grip Graspers ( 2.3Mm ) D- Bowel Thumb Grip Graspers ( 2.3Mm ) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes-A-Curved Spatulaprobes ( 2.4Mm ) B-Straight Spatulaprobes ( 2.4Mm ) C-Hook Probes ( 2.4Mm ) D-Conical Probes ( 2.4Mm ) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes-A-Curved Spatulaprobes ( 2.4Mm ) B-Straight Spatulaprobes ( 2.4Mm ) C-Hook Probes ( 2.4Mm ) , D-Conical Probes ( 2.4Mm ) , Percutaneous Tracheostomy Tubesize 7 And Size 8 , Perforator Adult Size , Pericardial Sumps Size 20 Frshould Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. , Pericardial Sumps Size 20 Fr Should Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. , Perindopril 4Mg Tablets , Perindopril 8Mg Tablets , Peripheral L.V. Catheters . , Peripherally Inserted Central Cathetersize 22X40 , Peripherally Inserted Central Cathetersize 22X60 , Peripherally Inserted Central Cathetersize 22X80 , Peripherally Inseted Central Catheter With Distally Located Valve And Close-Ended 5 French Single-Lumen, 45Cm., 55Cm. . , Peritoneal Dialysis Transfer Set , Peritoneal Fluid -Dianeal 1.5% , Peritoneal Fluid -Dianeal 2.5% , Peritoneal Fluid -Dianeal 4.25% , Peritoneal Fluid -Extraneal 7.5% , Permanent Fixation Device Made Of 316L Stainless Steel Having Cannula Lenth Of 37Cm With Smooth Polyetheretherketone ( Peek ) Cap To Eliminate Exposed Metal Tip And Help Minimize Adhesions To The Fastener And Also With Fastner Level Indicator With Metric Scale To Facilitate Lap Measurments- 30 Fastners , Permanent Pacemaker Dual Chamber+ Leads ( Fda Approved Not Ce Approved ) , Permanent Tunnel Catheter19 Cm & 21 Cm , Permethrine 0.01 Ointment , Permethrine 0.05 Ointment , Pethidine 100 Mg Injection , Pethidine 50 Mginj. , Phenethyl 50 Mg Inj. , Phenibarbitone ( 250Mg / 5Ml ) Injection , Phenobarbitone100mg / Ml 1Ml Amp.Inj. , Phenobarbitone - 30 Mgcap. , Phenobarbitone ( 100Ml ) Syp. , Phenobarbitone . - 200 Mg / Mlinj. , Phenoxybenzamine 1Vial Inj. , Phenoxybenzamine 50 Mg / Ml Ampoule Injection , Phenylepherineophthal. Sol 5Ml Eye Drop , Phenylephrine 10Mg / Mlampoule Injection , Phenylephrine Hcl 10Mg / 1Ml Inj. , Phenytion Sodium Susp. 25Mg / Ml ( 200Ml ) Syp. , Phenytoin Sodium 250 Mg / 5 Ml ( 5Ml Vial ) Inj. , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. Ophy1010 - 10 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1215 - 12 Cm X 15 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1520 - 15 Cm X 20 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1525 - 15 Cm X 25 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy2030 - 20 Cm X 30 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy2536 - 25 Cm X 37.5 Cm , Picc Silicon Line For Infant. Xro, F-26, L-50Cm, Fr-1.9, With Peelable Canula, Protective Sleeves, Silicon Hub, Fda Approved Trimming Tool. . , Pigtailmarkercatheter5 Fr With 100 Cm , Pigtail Catheter Single Puncture With Dilator Set 14, 16 & 18 Each - 45 Cm Length , Pigtail Cathter ( Angiography ) 5Fr Long And Short , Pigtail Drainage Catheter Set With 10F / 12F Locking Catheterwith Dilator Set, Guide Wire, Connector, 2 Way Stop Cork, Needle, Scalpel In A Tray Pack , Pilocarpin Pfs Vialinj. , Pilocarpine 0.5 % / 1Mlinj. , Pilocarpine Eye Drops 2%5Ml Eye Drop , Pistol Grip Curved Coagulating Shears Ergonomic Handle With Att, Shaft Lengths 45Cm. Can Seal Blood Vessels Upto And Including 7Mm In Diameter, Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The Following Shaft Lengths 3 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 7Mm In Diameter With Att.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 45 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter.Compatible With Gen 11 , Placentntrex Inj. , Plain Catheter 14, 16, 17, 18, 20 , Plain Disposable Drape Sheet, 120Cm X 150Cm , Plain Sheet Size- 120X210cm ( Sky Blue ) , Plasma Expander Inferon 500Ml Ffs / Bfs Bottle . Solution , Plasma Filter For Plasmapheresis , Plasma Lyte-A- 500 Mla Sterile Non Pyrogenic Isotonic Solution , Plasma Lyte-A- 500 Ml A Sterile Nonpyrogenic Isotonic Solution , Plastar Of Paris ( Per Kg ) Per Kg , Plastic Apron ( Disposible ) . , Plastic Apron ( Reusable ) . , Platinum Coil$ For Aneurysm Embolisation 3D 7Mm X 20Cm Mechanically / Electritally Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 7 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneufiysm Embolisation 3D Smm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgl And Usfda Approved , Platinum Coils For Aneurysm Embolisation 30 16Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriale & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 16 Mm X 30 — 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgjand Usfda Approved , Platinum Coils For Aneurysm Embolisation 30 4Mm X Jocm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 10 Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 10 Mm X 30 Cm, Compatable With Sr. No.3 & 4. Used For Neurovascular Purpose .Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 10Mm X 20Cm Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 10 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfoa Approved , Platinum Coils For Aneurysm Embolisation 3D 12Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 12 Mm X 30 - 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 14Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 14 Mm X 30 - 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 18Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 18 Mm X 30 - 40 Cm, Comparable With Sr. No 3 & 4. Used For Neurovascular Purpose. , Platinum Coils For Aneurysm Embolisation 3D 20Mm X 30 - Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 20 Mm X 30 - S0 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 22Mm X Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 22 Mm X 50 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 25Mm X Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 25 Mm X 50 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 2Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 2Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 3Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 3Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 30 Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 4Mm X 12Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 12 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 4Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 20Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 7Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 7 Mm X I5 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 9Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropr ( Ate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 9 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 9Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 9 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D Smm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 2Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size2 Mm X 2 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 6 Cm, Compatable With Sr. No‘3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 6 Cm, Compatable With Sr. No 3 & 4.Should Be Dcgi And Usfdaapproved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System Helical Configuration, For Intra-Cranial Aneurysm ’Embolization, Of Size 4 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Pcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix Smm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helixsmm X 20Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Heiicaiconfiguration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular , Platinum Coils For Aneurysm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 2 Cm, Compatable With Sr.No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 4Mm X 8Cm Mechanically / Electrically Detachable Barepaltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra- Cranial Aneurysm Embolization, Of Size 4 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 8Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 8 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 8Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 8 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Pledget 3X3mm Firm 10 Starnds , Pledget Oval 3X6mm Firm 10 Starnds , Pledget Oval 3X6mm Firm 10 Starnds , Pledget Square 4.5X6mm Firm 10 Strands , Plegiocard ( 20Ml ) Potassium Solution , Ployglecaprone 25 & Polypropylene Hernia System Mesh Large With Pollyglicaprone 25 Underlay Film , Ployglecaprone 25 & Polypropylene Hernia System Mesh Meduim With Pollyglicaprone 25 Underlay Film , Ployglecaprone 25 & Polypropylene Hernia System Mesh Oval With Pollyglicaprone 25 Underlay Film , Pm O Line { M- F } ---200 Cm , Pm O Line { M- M } --- 200 Cm , Pneumococcal ( Polysaccharide ) Vaccine 13 Valent / 0.5Ml Inj Vaccine , Pneumococcal Conjugate Vaccine 13 ( O.5 Ml Pfs ) Inj. , Policresulen 50 Mg+ Cinchocaine Hydrochloride 10 Mg30 Mg Tube , Poliglactin 910, Size 2-0 With 26Mm, 5 / 8 Circle, Round Body Needle, 90Cm , Poliglactin 910, Size 2-0 With, 30Mm, Fish Hook Needle, 70Cm, Round Body , Poly Propylene Mono Filament Sterile Precut With 1 / 2 Cir Rb Heavy Needle 30Mm Length 70 Cm Non Absorbable ( Surgical Sutures Usp Size 1 ) , Digonstic , Poly Propylene Mono Filament Sterile Precut With 1 / 2 Cir Rb Needle 30 Mm Length 70 Cm Non Absorbable Surgical Sutures Usp Size 2 / 0 ( 12 Foils / Pkt ) , Surgical Material , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt , Size 6 Cm X6 Cm , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt, Size 10 Cm X 10 Cm , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt, Size 15 Cm X 25 Cm , Polyamide Black Monofilament, 1 / 2 Circle Reverse Cutting Heavy , 1 No., 45Mm , 100Cm , Polyamide Black Monofilament, 3 / 8 Circle Reverse Cutting, 2-0, 45Mm , 70Cm , Polyamide Black Monofilament, 3 / 8 Circle Reverse Cutting, 3-0, 26Mm , 70Cm , Polyamide Black Suture 70 Cm, Size 2-0, 45Mm 3 / 8 Circle Reverse Cutting Needle, 1 Foil , Polybutester With Polytribolate Coating* 2-0 90Cm, Blue26mm1 / 2 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 4-0 90Cm, Blue17mm1 / 2 Circletaper Point, Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm, Blue12mm3 / 8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm, Blue17mm1 / 2 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 6-0 75Cm, Blue9mm3 / 8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coatingl* 3-0 90Cm, Blue26mm1 / 2 Circletaper Point , Double Arm , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 5Fr 26Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 6Fr 16Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year . , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 6Fr 26Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year . , Polydiaxanone1 No.Voilet Monofilament 150 Cm Loop, 1 / 2 Circle Roundbody Ctx Needle 48Mm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Left Inguinal Hernia Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Left Inguinal Hernia Small Size 12Cm X 8Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia Small Size 12Cm X 8Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia / Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia / Small Size 12Cm X 8Cm , Polyester Monofilament Self Fixing Mesh With Absorbable Polylactic Acid Grips Size 15Cm X 15Cm , Polyester Monofilament Self Fixing Mesh With Absorbable Polylactic Acid Grips / Size 15Cm X 15Cm , Polyester Multifilament Collagen Ipom 3D Weave Mesh With Prefixed Sutures For Lap Ventral Hernia Surgery 20Cm X 15Cm , Polyglactin 910 Violet Sutre 180 Cm.Size 1, 40 Mm 1 / 2 Circle Round Body Tapercut Doubleneedle, 1 Foil , Polyglactin 910 Withtriclosan Coating1, 1 / 2 Circle Reverse Cutting O.S, 40 Mm, 100Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating1, 1 / 2 Circle Round Body, 40 Mm, 100 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating1-0, 1 / 2 Circle Reverse Cutting O.S, 40 Mm, 100 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating3-0, 1 / 2 Circle Round Body, 20 Mm, 75 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating 1-0, 1 / 2 Circle Round Body, 40 Mm, 100Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating 2-0, 1 / 2 Circle Round Body, 30 Mm, 100 Cm, Usfda Approved , Polyglycolic Acid Size -1, 130Cm. At One Suture End 50Mm, 1 / 2 Circle Round Body Heavy Needle And Another Needle 80Mm, Straight Round Body Attached At Loop, 80Cm, Away From Free End Of Suture , Polymaide Mono Filament ( Nylon ) With Cd Cut Needle 20 Mm Length 70 Cm Size 2 / 0 ( 12 Foils / Pkt ) , Polymer From Deagraded Gelaltin + Nitrogen + Elecrolytes Ffs Bottle 500 Ml Iv , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. Sizes- A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing.A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymer Pledget Ptfe Suture Buttress 6 Pledgets Per Packet, 7 Mm X 3 Mm X 1.5 Mm , Polymer Prosthesis For Cbd / Pancreatic Duct 10 / 12Cm . Single Pg Tail With Flaps At Proximal And Distal End. With Side Holes On Curves End And Spiral Holes At Straight End. Size 7 / 8 / 9 / 10 Fr. , Polymide Suture Size 3-O, 70Cm, 26Mm 3 / 8 Circle Rc Needle , Polymixicn + Chloromphenical +Dexamethasone 10 Gm.10 Gm. Ointment , Polypectomy Snare , Polypen Cannula ( Iv Cannula Without Flang ) 20 G , Polypen Cannula ( Iv Cannula Without Flang ) 22 G , Polypen Cannula ( Iv Cannula Without Flang ) 24 G , Polypropylene2-0 90 Cmblue26mm1 / 2Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene3-0 90 Cm, Blue17mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene4-0 75 Cm, Blue17mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene4-0 90 Cm, Blue22mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue12mm3 / 8 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue13mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue17mm1 / 2 Circletaper Poin, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene6-0 75 Cm, Blue11mm3 / 8 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene6-0 75 Cm, Blue13mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene7-0 60 Cm Blue9mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene7-0 75 Cm Blue10mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene8-0 60 Cm Blue8mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 10 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 15 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 30 X 30 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 6 X 11 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 10 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 15 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 30 X 30 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 6 X 11 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 7.5 X 15 Partialy Absorabable Mesh , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Extended , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Large , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Medium , Polypropylene, Size 6-0 , Polypropylene, Size 7-0 , Polyurethane Catheter With Introducer For Tpn, One Heparin Stopper, Non Return Valve. Should Have Integral Cap With 70% Isopropyl Alcohol Sterilized, Ce. . , Polyurethane Picc Line For Infant. Xro, F-24, L-15 / 20Cm, Fr-2, With Micro Flash Canula. Fda Approved Trimming Tool. . , Polyurethane Picc Line For Newborn. Xro, Fr-28, L-25Cm, Fr-1 With Splitting Canula And Stylet. Fda Approved Trimming Tool. . , Polyvinyl Alcohol 14Mg In 1Ml, Povidone 6Mg5ml Eye Drop , Porcine Bio Prosthetic Heart Valvemitralshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Porcine Bio Prosthetic Heart Valvemitral Should Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Porcine Bio Prosthetic Heart Valve Aortic Should Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size-19Mm, 21Mm, 23Mm , Porcine Bio Prosthetic Heart Valve Aorticshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size-19Mm, 21Mm, 23Mm , Portable Wound Closer System Three Pressure Settings:-75Mmhg, -100Mmhg And -125Mmhg, 7.5X20cm Pu Foam, 3 Layer Drape Canister 200Ml And Silicon Gel Dressing , Post Matum Gloves 6, Isi Mark . , Post Matum Gloves 6.5, Isi Mark . , Post Matum Gloves 7, Isi Mark . , Post Matum Gloves 7½, Isi Mark . , Post Matum Gloves 8 Isi Mark . , Postpartumhemorrhage Balloon Silicon Catheter For Control Of Obstetrical Bleeding Or Management Of Pph. Size- 24Fr, Length- 54Cm, Balloon Capacity-500Ml, . , Potassioum Iodide Calcium Chloride Dihydrate Eye Drops 1 Eye Drop , Potassium Free, Hemodialysis Fluid By Carbo Made ( Part A Part B ) , Povidine Iodine Gargle 1%, 100 Ml Liquid , Povidine Iodine Mouth Wash ( 100Ml ) Solution , Povidone Iodine 1% Eye Drop5ml Eye Drop , Povidone Iodine 7.5% Oitment500gm Ointment , Povidone Iodine Vaginal Pessary200mg. Ointment , Pramipexole 0.5 Tab. , Pramipexole 1.5 Tab. , Prasugrel 10Mg Tablets , Prazosinxl 2.5 Mgtab. , Prazosinxl 5 Mgtab. , Prednisolon Accetate Ophthal 5 Ml 5Ml Eye Drop , Prednisolon Eyrop5ml Eye Drop , Prednisolone 10 Mg Tab. , Premixed Human Insulin Analogue ( R-Dna Origin ) Mixture Of Soluble Insulin Aspart 30% And Protamine Crystallised Insulin Aspart 70% 100 Iu / Ml In 3Mlpfs ( 1 X 3Ml ) Inj. , Premixed Human Insulin Analogue ( R-Dna Origin ) Mixture Of Soluble Insulin Aspart 50% And Protamine Crystallised Insulin Aspart50% 100 Iu / Ml In 3Ml Pfs ( 1X3ml ) Inj. , Prenam 400Gmspowder , Pre-Operative Skin Preparation Solution- Patient Pre-Operative Skin Preparation Solution In One-Step Sterile Applicator Container For Single Use With 2% Chlorhexidine Gluconate ( Chg ) And 70% Isopropyl Alcohol ( Ipa ) With Orange Tint Colour For Easy Visualization, Fda Approved. Size-26 Ml, 10.5 Ml, , Pressure Bag 1000Ml , Pressure Bag 500Ml , Pressure Bags , Pressure Dome , Pressure Garment For Post Burn Deformity Pressure For Various Part Of The Hole Body . , Pressure Monitoring Line= Pm Oline { M- F } 200 Cm , Pressure Monitoring Line= Pm O Line { M- M } 200 Cm , Pressure Tranducer , Pressure Transducer Assembly , Pressure Tubing 200Cm , Primaquin 2.5Mg Tab. , Primaquin 7.5Mg Tab. , Priming Volume Should Not Be More Than 120Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or 3 / 8. The Filter , Prism0cal ( Bicarb 22 ) 5 Litre Bag For Crrt , Prism0cal ( Bicarb 32 ) 5 Litre Bag For Crrt , Prismosol ( Bicarb 22 ) 5 L Bag For Crrt , Prismosol ( Bicarb 32 ) 5 L Bag For Crrt , Procaine Penicillin Powder For0.4Mg Mv / Vial Inj. , Procaine Surface Anesthetic 3Ml Inj. , Procarbazin 50 Mg Cap. , Procedural Kits Henia Kit Size 6Cmx11cm Polypropylene Mesh & 3 Sutures 1 Prolene Mesh, 1 Polyglicapron 25 & 2 Polypropylene Suture , Procedural Kits Henia Kit Size 7.6Cm X15cm Polypropylene Mesh & 3 Sutures 1 Prolene Mesh, 1 Polyglicapron 25 & 2 Polypropylene Suture , Progesteronebp-100Mg Cap , Programmable Vp Shunt One Pack , Prolene Double Ended Round Body 6-0 , Prolene Double Ended Round Body 7-0 , Prolinate Depot Inj. , Promethazine 25 Mg / Ml ( 10 Ml Vail ) Inj. , Promethazine 5Mg / 5Ml ( 100Ml ) Syp. , Promethazine Inj 25 Mg / Ml ( 10 Ml Vail ) , Prone Bolsters , Propylene Glycl Ip 4.96 % W / W Carbomer Ip 0.76% W / W, Colloidal Silver 32 Ppm Triethanolamine Bp 0.32% W / W Purified Water Ip Qs Tube Of 50 Gm1. Solutions , Proseal Lma Size ( 3, 4, 5 ) Size ( 3, 4, 5 ) , Prostegmin Inj. , Protamine 10Mg / Ml-5Ml Ampoule Injection , Protective Disk With Chg Hydrophilic Polyurethane Absorptive Foam With 86.8 Mg Chlorhexidine Gluconate ( Chg ) 1 Disk ( 2.5 Cm ) 7 Mm Center Hole With Radial Slit, , Protein + Vitamins + Minerals + Dha Pwr 200Gm. Powder , Protein + Vitamins + Minerals + Dha Pwr 200Gm. Scrub , Prothrombin Complex Concentrate 1000Iu , Prothrombin Complex Concentrate 1000Iu Inj Injection , Prothrombin Complex Concentrate 500 Iu , Prothrombin Complex Concentrate 500 Iu Inj Injection , Protine Powder 200Gms , Providone Iodine + Metronidazole ( 5 % + 1 % 15 Gm Tube ) , Ointment , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 15X15 Each Mesh , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 30X30 Each Mesh , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 6X11 Each Mesh , Ptfearterial Catheterwith Guide Wireand Introducer Needle Xro. G- 20, Luer Lock. . , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm -2X12, 17Mm1 / 2 Circletaper Point , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm, 17Mm1 / 2 Circle Round Body And Straight Cutting Needle With Breakaway Point , Ptfe Feltptfe Felt ( Thick ) ( Nominal Thickness 2.87Mm ) . 4In X 4In, 10.2Cmx10.2Cm ) , Ptfe Feltuniquely Designed To Provide Non Absorbent Tissue Protection , Ptfe Felt Ptfe Felt ( Nominal Thickness 1.65Mm ) . 4In X 4In, 10.2Cmx10.2Cm ) , Ptfe Felt Uniquely Designed To Provide Nonabsorbent Tissue Protection , Ptfe Guide Wire, Straight Tip, 150Cm, 0.035 Diameter , Pu Foam 400 - 600 Microns Pore Size Foam Withtherapeutic Reticulated Accurate Care , Puncture Needle , Puncture Needle 16G, 7Cm Length , Pur Catheter Non Shrinkable Iv Line With Prefilled 70% Isopropyl Alcohol Cap For Peripheral Veins. Xro, And With Non- Return Valve . , Pur Material Xro Needle Prick Freei V Catheter With Metal Introducer. . , Pur Umbilical Venus Catheterwith Xro. Fr-2.5, L-30Cm. Luer Lock, Stopcock. . , Pur Umbilical Venus Catheterwith Xro. Fr-3.5, L-30Cm. Luer Lock, Stopcock. . , Pva Particals300, 500, 700, 1000 Micron , Pvccorrugated Rubber Drain . , Pvc Tubing - 12 Feet , Pyridium, 200Mg Tablets , Pyridoxine 40Mg Tablets , Quadrivalent Human Papillomavirustype 6, 11, 16, 18 Vaccineinj. , Quinine Dihydrochloride - 300Mg / Ml ( 2Ml Amp ) Inj. , Quinine Sulphate - 300Mgtab , Quinine Sulphateip-600Mg Tab. , Rabies Immunoglobines Vialinj. , Radial Introducer Puncture Set4 Fr , Radial Puncture Needle 18G , Radial Puncture Needle 20G , Radial Sheath 5Fx7cm , Radial Sheath 6Fx16cm , Radial Sheath 6Fx7cm , Radial Sheath 7Fx16c , Radial Sheath 7Fx7cm , Radiation Protection Screen6 X 3 , Ramosetron 0.3Mg / 2Ml Vial Inj , Ramosetron 5Mcgcap , Raney Clips / Raney Clips Provides For Hemostasis Of Scalp Flap Edges, Available In Stainless Steel, Plastic Sterile Removable Disposable Clips . , Raneys Clip Pack Of 30 , Ranibizumab 0.3 Mg / Ml Inj. Prefilled Syringe , Ranibizumab 0.5 Mg / Ml Inj. Prefilled Syringe , Ranibizumab 10Mg. / Ml Inj. Prefilled Syringe , Rapid Priming Set Length 35Cm And 40Cm With2 Spike , Rapidure Slab 75 Cm . , Rasigline 0.5Mg Tab. , Rasigline 1Mg Tab. , Rebrithing Beg 0.5 Ltr. , Rebrithing Beg 1 Ltr. . , Rebrithing Beg 1.5 Ltr. , Rebrithing Beg 2 Ltr. , Recombinant Human Growth Hormone 4 Iu / Vial Inj. , Recombinant Human Platelet Derived Growth Factor 100 Mcg Ointment , Reconstitution With The Contents Of The Bacteriostatic Solvent Cartridge Gives A Concentration Of 5.83 Mg Per Ml. , Rectified Spirit ( 90% ) Solution , Regular Human Insulin 40 Iu ( Actrapid ) 10Ml Vial Inj. , Regular Wall Patch Of Ptfe No Pre Clotting, Thickness -0.6Mm Sizes:- 3Cm X 3Cm, , Regular Wall Patch Of Ptfe No Pre Clotting, Thickness -0.6Mmsizes:- 3Cm X 3Cm, , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 5.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 5.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 6.0Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 6.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 7.0Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 7.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 8.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 8.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 9.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection, Sizes- 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 Mm. , Reinforced Epidural Wired Polyurethane Catheter Kit With Stainless Steel Needle. Size- Catheter-19G, Needle-17G. . , Reload For Liner Cutter 55 Mmreload For Liner Cutter 55 Blue , Reload For Liner Cutter 55 Mmreload For Liner Cutter 55 Green , Reload For Liner Cutter 75 Mmreload For Liner Cutter75 Green , Reload For Liner Cutter75 Mmreload For Liner Cutter 75 Blue , Remifentanil 1Mg / 1Ml Inj. , Reservoir Adult Size ( Large ) , Reservoir Bag1 Litr , Reservoir Bag2 Litr , Reservoir Bag500 Ml , Reservoir Bag ( 500Ml, 1Litr, 1.5 Litr, 2 Litr ) 500 Ml, 1;Iter, 1.5 Liter, 2 Liter , , Reservoir Bag 1.5 Litr , Respule Salbutamol 5Mg., 2.5Ml , Respules Budesonide Respules 0.25Mg / 2Ml , Retrieval Snare System , Reusable And Washable Antimicrobial Four Layern 99 Mask. Should Have Adjustable Clips To Prevent Air Leking And Fogging On The Eye Wear. , Reusable Linear Cutter-55 Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings & Separate Knife - Blade Module. , Rh-Erythropoetin ( 2000 I.U ) , Pfs , Riluzole 100Mginj. , Riluzole 50Mg. Tab. , Rinato Wire 190Cm , Ringer Lactateot Packffs Bottle 45 Ml Iv , Risedronate 35 Mg Tab. , Risedronate 70 Mg Tab. , Risperidone 1Mg Tab. , Risperidone Trihexyphenidyl Hydrochloride Lets 2+2Mg. Tab. , Risperidone Trihexyphenidyl Hydrochloride Lets 3+2Mg. Tab. , Rivastigmine 1.5Mg Tab. , Rivastigmine 2 Mg Cap. , Rivastigmine 3Mg Tab. , Ro Antiscalant Chemical 5 Liter Can For Autoclaves Machine , Robertsuterinecatheter 5F , Rocronium Bromide 100Mg / 10Ml Inj. , Rocronium Bromide 50Mg / 5Ml Inj. , Rocuronium 5Mlvial Injection , Ropinirole 0.2% ( 10Ml ) Inj. , Ropinirole 0.75% ( 20Ml ) Inj. , Ropivacaine 0.75%, 20 Ml Vial Injection , Roprinole 0.25 Tab. , Round Gel Head Rest Large Size , Round Gel Head Rest Small Size , Round Gel With Silicon Head Rest Large Size , Round Gel With Silicon Head Rest Small Size , Roxithromycin Ip-150Mg, Colours+Brilliant Blue Lake + Titanium Dioxide Ip. Tab. , Runthrough Ns Floppy Preformedj , Ryles Tube ( Pvc ) Adultsize 14, 16, 18 . , Ryles Tube ( Pvc ) Size : Adult ( 18, Each ) , Tube , Ryles Tube ( Pvc ) Size : Adult: 16 ( Each ) , Consumable , Ryles Tube ( Pvc ) Size : Children: All Size . , Ryles Tube ( Size 14 Each Piece ) , Consumable , Safe Delivery Kits - O Gauze Swab O Abdominal Sponge ( X-Ray Op. ) O Umblical Cord Clamp O Umblical Cord Ties O Umblical Tabular Band ( Elastic ) O Umblical Scissor O Sutures O Needle Holder O Mucus Extractor With Adopter O Syringe ( 20 Ml ) O Baby Wipe ( 60×60 ) O Baby Diapero Baby Blanket O Baby Garment O Feeding Bottle O Maternity Gown O Maternity Pads Omaternity Mesh Pantyo Surgeon Caps O Surgeon Gown O Surgeon Gloves ( Sterile Surgical Latex Glovesbeaded, 6½, 7, 7½, Each Three Pair Isi Mark ) O Lignocaine Gel O Povidone Iodine Solutions O Plastic Tray O Applicator Stick O Perineal Sheet With Legging O Maternity Drape Sheet O Under Pad With Collecting Bag O Instruction Sheet, O Measuring Tape, O Dimension Detail Sheet, O Pen O Id Band ( Pediatric ) , O Id Band Adult , O Waste Bag , Salbutamol 15Ml ( 5Mg. / Ml ) Solution , Salbutamol 2Mg. ( 5Ml ) Inj. , Salbutamol 5Mg., 2.5Ml Powder , Salbutamol Nebuliser Solution Bp-Sabutamol Sulphate Eq. To Salbutamol 1Mg Per Ml ( 2.5 Ml Amp ) , Ampule , Salbutamol Rota 200 Mcginha. , Salbutamol Rotacap ( 30 Caps ) Rotacap , Salbutamol Syp 2Mg / 5Ml 100 Mlsyp. , Salbutomol Solution For Nebulizer 5Mg / Ml Bott. . Solution , Saline ( Sodium Chloride ) 10Mlnasal Drop , Salisylic Acid 500Gm. Powder , Sartacanazole Nitrate 2% 10Gm. Ointment , Schirmer Tear Test Ophthalmic Strips Per 50 Sterip. Solution , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 17 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att.Compatible With Gen 11 , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 9 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att Compatible With Gen 11 , Sclerotherapy Needle , Scoline ( 10 Ml ) Vial ( 50Mg / Ml ) --10 Ml Vial Injection , Securestrap Open 2 Point Fixation Device For Open Hernia Repairs With A Curved Cannula & Strap-Positioning Tip Having A Forward-Tilted Handle & Metric Ruler. It Is A Trigger-Squeeze Mechanical Device With A Curved Cannula, Pre-Loaded With 20 Absorbable Straps Which Are Made Of A Blend Of Polydioxanone Dyed With D&C Violet No. 2 And An L ( - ) -Lactide / Glycolide Copolymer. Inserted Length Of Strap Should Be 6.7 Mm. , Selective Salpingography Catheter , Self Adhering Silicon External Catheter Should Be Built In Band, Clear Coated, Breathable, Odorless, Single . Sterilized, Size:- 6, 8, 10, 12, 14, 16, 18, 20, 22, , Self Expandable Biliary Stent- Electro Polished Self-Expanding Nitinol Stent With Four Tantalum Spoons Of Both Sides Of Stent. All Sizes 6F Sheath Compatible. Multiple Deployment Methods For Controlled And Accurate Deployment, , Self Expanding Nitinol Stent ( 5Mm To 14Mm ) & Lengths ( 2Cm, 4Cm, 6Cm, 8Cm, 10Cm, 12Cm ) With Shaft Length Of 80Cm & 135Cms , Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts ( Both Luminal And External Surface Covered By Graft ) . Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism. Size- Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm, 100Mm, 120M , Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Size- Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm. , Self Gripping Mesh With Polyester Monofilament Pre-Cut With Absorbable Polylactic Acid Grips For Left Inguinal Hernia / Small Size 12 X 08 Cm, Us Fda Approved , Selodermointment , Senquel Ad Gel Gel , Sequential Compression Device- Should Provide Sequential Gradient And Circumferential Compression Around The Ankle, Calf And Thighcontroller Should Provide The Pressure Of 45 Mmhg At The Ankle Area, 40 Mmhg At The Calf Area & 30 Mmhg At The Thigh Area. , Sequential Compression Sleeves Around The Ankle, Calfand Thigh, • Pressure Range From 45 Mm Hg-130 Hg With Therapeutic Pressure & Highest Pressure For Foot Cuff. • Should Have Different Compression Level At All The Points, • Sleeves Should Have Three Bladders For Giving Optimal Compression And Three Different Chambers With Different Pressure At Each Chamber, • Should Comply All Of This Safety Standard , Should Be Approved By Usfda & Ce , Serenase Nasal Drops 1 Pack , Sertaconazole Nitrate Bp ..20 % W / W Preservative:Benzyl Alcohol Ip 10Gm 0.05 Ointment , Sertraline Hydrochloride 100Mg. Tab. , Sertraline Hydrochloride 25Mg. Tab. , Sevelamer 400 Mg Tablets , Sevelamer 800 Mg Tab. , Shk Catheter1.0, 2.05F , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-10, Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-12Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-4, 22Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-6, 22Cm . , Short Pencil Point Spinal Needle G-25, L-38Mm . , Short Ptfe Material Emergency Catheter With Floswitch And Stabilising Device. G-16, L- 130, 160Mm. . , Should Allow Maximum Blood Flow Rate Of 4.0 To 6.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Sildenafil 25Mg Tablets , Silicon Condom Catheter , Silicon Feeding Tube For Long Term Access. Fr-5. L-125Cm. . , Silicon Feeding Tube For Long Term Access. Fr-6. L-125Cm. , Silicon Feeding Tube For Long Term Access. Fr-9. L-125Cm. , Silicon Nasopharyngeal Airway, With Adjustable Flange And Viden End Sterilized Sizes- 2022, 24, 26, 28, 30, 32, 34, 36, Fr. . , Silicon Ring Mounted Illumination Consumable.For Use With 5-8Mm Open Surgery Medical Devices .40 Gm Assembly With 3Mtr Cable Should Provide Five Hours Illumination, Ce Certified , Silicon Vessel Loop Blue Maxi , Silicon Vessel Loop Red Maxi , Silicone ( 100% ) Catheter Two Way 14 , 16, 18, 20 , Silicone ( 100% ) Catheter Two Way 6 , Silicone ( 100% ) Catheter Two Way 8 . , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X30 / 75Cm Da, Oval Pledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 16Mm , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X30 / 75Cm Da, Oval Pledget 4.5X6 Mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X36 / 90Cm Da, Oval Pledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Coated , Braided Polyester* 2-0 Blue 1X30 / 75Cm Da, Oval Pledget 3X6mm, Soft Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Sheet, Size 10 Cm X 10 Cm , Silicone Sheet, Size 6 Cm X 6 Cm , Silk 2-0 Cutting Body , Silk 2-0 Round Body , Silk 3-0 Round Body , Silk Protein And Antimicrobial Silver Dressing Pu Foam 10X10 Cm , Silk Protein And Silver Oxide Based Mesh Wound Dressing 10X25cm , Silk Protein And Silver Oxide Based Mesh Wound Dressing 20X40 Cm , Silk Protein And Silver Oxide Based Wound Dressing 10X25 Cm , Silk Protein Derived Wound Dressing 10X10 , Silk Reel 2-0 X 25Mtr , Silklikecloth , Hypoallergic Surgical Tape 2.5Cm X9.1 Meter , Silver Filling Instrument . , Silver Nitrate 0.2% Glycerol 2% & Purifired Water 25G. , Silver Nitrate Gel 0.2% W / W 20Ggel , Silver Sulphadiazine Cream Usp 1% W / W 25Gm Cream , Sim Catheter 1, 2 , Single Handed Scalpel Blade Removal. , Single Lumen Catheter Full Set With Rolleson Syringe. , Single Lumen -Cvc , Single Lumen Cvc 22G, 10Cm , Single Lumen Cvc 24G, 20 Cm , Single Lumen --Cvc Arrow , Single Stage Straightvenous Cannula Plastic Multi Port Tips , One Piece, Sizes - 10, 12, 14, 16, 18, 20, 22, 24, 28, 30 , Single Stage Straightvenous Cannula Malleableplastic Multi Port Tips And Malleable, One Piece, Sizes - 18, 20, 22, 24, 28, 30 , Single Stage Straightvenous Cannula Malleableplastic Multi Port Tips And Malleable, One Piece, Sizes - 18, 20, 22, 24, 28, 30, 32 Fr , Single Stage Venous Cannulae Straight Plastic Multi Port Tipsone Piece, Sizes - 10, 12, 14, 16, 18, 20, 22, 24, 28, 30, 32Fr , Single Stage Venous Cannulae With Right Angle Metal Tip Beveled Metal , Multi Port Tips Connectionsite 3 / 8 Inch, Sizes-10, 12, 14, 16, 18, 20, 22, 24 , Single Stage Venous Cannulae With Right Angle Metal Tip Beveled Metal , Multi Port Tips Connectionsite 3 / 8 Inch, Sizes-10, 12, 14, 16, 18, 20, 22, 24Fr , Single Use Portable Negative Pressure Wound Therapy System With A Small Portable Sterile Pump Maintaining A Pressure Of 80Mm Of Hg ( Nominal ) + / - 20Mm Of Hg Size 1 , Sion Blue , Skin Marker And Scale Set Of 1 , Sleeve Of Optically Guided 12Mm Bladeless Trocarwith Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal100mm Length. , Sleeve Of Optically Guided 5Mm Bladeless Trocarwith Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal100mm Length. , Sleeves Should Have Three Different Chambers With Different Pressure At Each Chamber, Should Have Passive Cooling Facility In Sleeves For Better Patient Comfort, Should Comply Ingress Protection Ip23 ( Iec 529 ) , Should Comply All Of Safety Standard, , Small Bore Y Extension Set With 2 Lad & Spin Lock Connector. Latex Free With No Metal Components. , Small Size ( 10X7.5X3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Small Size ( 2.6 X 3.4Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Small Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Small Wide Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Snare 5, 10, 25Mm , Snp ( Nitroprusside ) 50 Mg / 2Ml Vial Injection , Snugger Setall Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue &Pinkcolors For Vessel Identification. , Snugger Set All Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue &Pinkcolors For Vessel Identification. , Soda Lime For Anaesthesia Work Station ( Disposable, Carbon Dioxide Absorbent Medisorb Twin Pack, 4.5 Kg. ( 9.9 Lb ) White To Violet ) Inj. , Sodabicarb 1000 Mg Tablets , Sodabicarb 500 Mg Tablets , Sodalime Absorber Cannister , Sodium Bicarbonate 8.4% W / V25 Ml Ampoule Injection , Sodium Bycarb Glycerine Drops 8% 10Mleye Drop , Sodium Flourosceininjection3ml , Sodium Fusidate 0.02 Ointment , Sodium Hyaluronate For The Treatment Of Degenerative Joints Disease, Pre-Filled Syringe:25Mg / 2.5 Ml Pfs - 2.5 Ml / Pfs Inj. , Sodium Hypochlorite 10 %5 Lit. Solution , Sodium Hypochlorite 5% Solution 5Ltrcan , Sodium Nitroprusside 50 Mginj. , Sodium Pantolate Vials Inj. , Sodium Phosphate Enema B.P. ( Proctolysis Enema ) 18Gm / 100Ml 100Ml-Plastic Enema , Sodium Thiopentone0.5Gm Powder / Vial 20Ml Vialinj. , Sodium Valproate 100Mg. Inj. , Sodium Valproate 200Mg. Inj. , Sodium Valproate Sr-200Mg. Tab. , Sodium Valproate Sr-300Mg. Tab. , Sodium Valproate Sr-500Mg. Tab. , Soft Collar S / M / L , Soft Roll 6 . , Soluble Insulinip, Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Solution Contains 40 Iu ( 10Ml Vial ) Inj. , Sorafenib 200Mg, Tablet , Sorbiline 200Ml Syp. , Soya Isoflavone 100 Mg + Calcium Citrate 500 Mg + Zinc 15 Mg + Cromium With Vitamins Tab. , Spangestrongel Ointment , Speaking Valves , Specification Forpaeditric Oxygenator Priming Volume Maximum Should Be Less Than 105Ml.Minimum Operating Volume Approx. 30 Ml O Maximum Blood Flow Rate Should Be 2.8.Ltrs / Min. O Oxygen Transfer Should Not Be Less Than 250Ml / Min.O Pressure Drop Should Be Least-Up To 100Mmhg Or Less.O Heat Exchange Efficiency Should Not Be Less Than 0.65. Surface Area Of The Fibers Should Be Approx0.8 To 1.0M2 . O Heat Exchanger Fibre Material Shouldbe Made Of Polyurethane [ Tpu ] And Surface Area Should Be Approx. 0.13M2 To 0.15M2 . Blood Inlet Port 3 / 8 Blood Outlet Port 1 / 4 Cardioplegia Port 1 / 4 Gas Inlet Port 1 / 4 Gas Outlet Port 1 / 4Water Port 1 / 2 Maximum Pressure Blood Inlet 1000Mmhg, Water Inlet 42 Psi O Blood Storage Capacity Of Hard Shell Reservoir Should Be Max 3000Ml.O Minimum Operative Volume Of Hard Shell Reservoir Should Be 100Ml. , Specification Forsmall Adult Oxygenator Recommended Blood Flow Rating 0.5 - 5 L / Min Priming Volume Upto 140 Ml. Effective Gas Exchange Surface Area1.3 M² Effective Heat Exchange Surface Area0.3 M².Material Of Gas Exchange Fiberpolypropylene ( Pp ) Material Of Heat Exchange Fiber Polyurethane ( Tpu ) Max. Volume Capacity4.2 L Maximum Blood Flow Rates:- Venous Filter 7 L / Min- Cardiotomy Filter 5 L / Min- Combined 7 L / Min Minimum Operating Volume:- At Small Adult Blood Flow Rate Of 5 L / Min 150 Ml Cardiotomy Filter Pore Size 40 ?M Venous Filter Pore Size 68 ?Mmaterial Of Defoamerpolyurethane ( Pu ) Material Of Filterpolyester ( Pet ) , Polypropylene ( Pp ] , Specification For Adult Hemoconcentrator The Priming Volume Should Be 70 Ml O Effective Surface Area Of The Fibers Should Be ?1M 2 . O Blood Port Should Be ¼ With Luer Locks O Filtrate Port Should Be ½ ( 1 / 4Adapter ) . O Blood Flow , Specification For Adult Oxygenatorpriming Volume Should Be Less Than 300 Ml, Blood Flow Range Should Be 0 To 6 Liters / Min, Oxygen Transfer Should Be 400Ml / Min, Heat Exchange Efficiency Should Not Be Less Than 0.50, Housing Material Should Be Of Polycarbonate, Effective Gas Exchange Surface Area Of The Fibers Should Be From 1.2 To 2.4M2 , Gas Exchange Fibre Material Shud Be Polypropylene [ P P ] , Heat Exchanger Fibre Should Be Made Ofpolyurethane [ Tpu ] And Surface Area Should Be Approx. 0.2 To 0 .3 M2, Blood Inlet Port ( From Pump ) 3 / 8, Blood Outlet Port 3 / 8 , Cardioplegia Port 1 / 4, Gas Inlet Port1 / 4, Gas Outlet Port 1 / 4 , Water Port 1 / 2, Maximum Pressure Blood Inlet 1000 Mmhg And Water Inlet 42 Psi , Blood Storage Capacity Of Hard Shellreservoir Should Be 4000-5000Ml Minimum Operating Volume Of Reservoir Should Be 200Ml. , Specification For Adult Oxygenator O Priming Volume Should Be Less Than 190 Ml. O Blood Flow Range Should Be 0-6 Lts / Min.O Oxygen Transfer Should Be Atleast 400Ml / Min.O Heat Exchange Efficiency Should Not Be Less Than 0.50.O Housing Material Should Be Of Polycarbonate. O Effective Gas Exchange Surface Area Of The Fibers Should Be From 1.2 To 2.4M2 Gas Exchange Fibre Material Shud Bepolypropylene [ P P ] O Heat Exchanger Fibre Should Be Made Ofolyurethane [ Tpu ] And Surface Area Should Be Approx. 0.2 To 0 .3 M2 Blood Inlet Port ( From Pump ) 3 / 8 Blood Outlet Port 3 / 8 Cardioplegia Port 1 / 4 Gasinlet Port 1 / 4 Gas Outlet Port 1 / 4 Water Ports ½ Maximum Pressure Blood Inlet 1000 Mmhg Water Inlet 42 Psi O Blood Storage Capacity Of Hard Shell Reservoir Should Be Approx. 4000-5000Mlo Minimum Operating Volume Of Reservoir Should Be 200Ml. , Specification For Pedaitric Hemoconcentrator It Should Have Priming Volume Approx 35Ml. O Effective Surfacearea Of The Fibers Should Be Approx 0.5M 2 . O Blood Port Should Be ¼With Luer Locks. O Filtrate Port Should Be ½. Omaximum Trans-Membrane Pressure Should Be 500Mm Hg. O It Should Have Tubing Lines Along With Reservoir Bag.Should Be ¼With Luer Locks. O Filtrate Port Should Be ½. Opressure Should Not Be More Than 500Mm Hg. O It Should Have Tubing With Reservoir Bag. , Specification For Small Adult Oxygenatorrecommended Blood Flow Rating 0.5 To 5 L / Min, Priming Volume 175 Ml Effective Gas Exchange Surface Area 1.3 M² , Effective Heat Exchange Surface Area 0.3 M², Material Of Gas Exchange Fibershould Bepolypropylene ( Pp ) , Material Of Heat Exchange Fiber Should Be Polyurethane ( Tpu ) , Maximum Volume Capacity 4.2 Litres Maximum Blood Flow Rates:- Venous Filter- 7 L / Min, Cardiotomy Filter- 5L / Min, Minimum Operating Volume:150 Ml, Cardiotomy Filter Pore Size 40 ?M, Venous Filter Pore Size 68 ?M, Material Of Defoamer Should Be Polyurethane ( Pu ) , Material Of Filter Should Be Polyester ( Pet ) / Polypropylene ( Pp ] , Material Of Housing Should Be Polycarbonate ( Pc ) , Specifications For Cardioplegia Heat Exchanger ( Bcd ) It Should Have Priming Volume Less Than 50 Ml, Blood Flow Rate Should Be Between 0 To 600 Ml / Min, Filter Pore Should Be Around 100 Um, Inlet Connection Should Be 1 / 4 , Outlet Connection Should Be 3 / 16. Heat Exchange Surface Area Should Be ?.20M 2, Heat Exchange Should Be Of Stainless Steelcorrugated / Convoluted Pipes. Bubble Trap Should Be Integrated For Highly Efficient Debubbling, Exchangeable Water In / Water Out Blood Flow Path Bottom Up It Should Have A Stopcockprime / Perfusion For Easypriming. It Should Have Tip In The Surgeon Pack So That It Can Beconnected To Cardioplegia Cannula. It Should Be Available Both In 4:1 And 1:4 Configurations. , Spercutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers ( 2.3Mm ) B- Clutch Thumb Grip Graspers ( 2.3Mm ) C- Babcock Thumb Grip Graspers ( 2.3Mm ) D- Bowel Thumb Grip Graspers ( 2.3Mm ) , Spinal Needle.Ce Certified22 No. L-12Cm . , Spinal Needle.Ce Certified22 No. L-15Cm . , Spinal Needle.Ce Certified23 No. With Introducer And Metal Stylet . , Spinal Needle.Ce Certified26 No. . , Spinal Needle.Ce Certified27 No. L-120Mm . , Spinal Needle.Ce Certified28 No. . , Spinal Needle.Ce Certified29 No., L-120Mm. . , Spinal Needle. Ce Certified18 No. . , Spinal Needle. Ce Certified20 No. . , Spinal Needle. Ce Certified21 No. . , Spinal Needle. Ce Certified24 No. . , Spinal Needle. Iso, Ce Certified16 No. . , Spirally Coiled Pe Pmo Line All Sizes 150, 200, 300, 400 Cm , Spirally Coiled Pvc Pmo Line All Sizes 150, 200, 300, 400 Cm , Spironolactone ( 50 Mg ) + Torsemide ( 10 Mg ) Tab. , Srings 2Ml Leur Lock , Stainless Steel Dual Cuffed For Ventilation During Co2 And Ktp Laser Surgery Of The Laryngeal / Tracheal Area , Stand For Lead Aprons; S.S. Made With Wheels, With Minimum 6 Hangers , Steal Core Guide Wire0.035 Inch , Steam Inhaler , Steel Wire 1 X 45 Cm, 3 X 45 Cm, 6, 48Mm 1 / 2 Circle Cutting 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 2, 40Mm 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 4, 40Mm 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 5, 44Mm 1 / 2 Circle Blunt Point , Stent Delivery Microcathetermicrocatheter : Compatible With Flow Diverter Delivery, Id 0.027 , Stent Neurovascular Self Expandable Nitinol Fully Deplorable Partly Or Completely Retrievable With Radiopaque Markers 4.S Mm X14 - 16Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.S Mm X 14 — 16 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Should Be Dcgi Andusfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 19 - 20Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 19 - 20 Mm, Fully Deployable, Partlyor Completely Retrievabie, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 19 - 20Mmneurovascular Selfexpandablenitinolstentused For Stent Assisted Coiling, Of Size 3.5 Mm X 19 – 20 Mm, Fully Deployable, Partly Orcompletely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 24 - 25Mm Neurovascu |Ar Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 24 - 2S Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter. Should Be Dcgl And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 24 - 25Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 24 - 25 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X 34 - 38Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 34 — 38 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfdaapproved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X 34 - 38Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 34 – 38 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X14 - 16Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 14 – 16 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X22 - 24Mm Neurovascular Self Expandable Nitinolstent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 22 —24 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X22 - 24Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 22 – 24 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X28 - 30Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 28 – 30 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Raoiopaque Markers 4.5 Mm X28 - 30Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 28 — 30 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfda Approved , Stent Retriever Device Tigertriver , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X40 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 7Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 7 Mm X 30 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11- 15. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 7Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 7 Mm X 40 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stentj With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11— 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm H 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11— 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 40 Rum, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr. No 11 - 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 6Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 6 Mm X 30 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid‘ Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11- 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 6Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 6 Mm X 40Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11 Is. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotio Straight / Tapered 6Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 6 Mm X 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfoa Approved , Stent Self Expandable Nitinol Carotio Straight / Tapered 6Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 6 Mm X 40 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotio Straight / Tapereo 10Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Sterilant Cold Disinfectant For Dialysis Containing Peracetic , Sterilant Hot Disinfectant For Dialysis Containing21% , Sterile Absorbable Geltatin Sponge ( Porcine Origine ) , Size 80 X 50 X 10 Mm , Sterile Adhesive Post Op Dressing Large, Silver Impregnated Antibacterial Pu Hydrophilicfoam Dressing Size Should Be 05Cm X 25 Cm And Transparent Adhesive Pu Drape Size 10Cmx30cm , Sterile Adhesive Post Op Dressing Small, Silver Impregnated Antibacterial Pu Hydrophilic Foam Dressing Size Should Be 05Cm X 10 Cm And Transparent Adhesive Pu Drape Size 10Cmx15cm , Sterile Collagen Sheet In Dry Form, Size 10 Cm X 20 Cm , Sterile Collagen Sheet In Dry Form, Size 15 Cm X 30 Cm , Sterile Collagen Sheet In Dry Form, Size 20 Cm X 40 Cm , Sterile Collagen Sponge 10X10cm . , Sterile Collagen Sponge 5X5cm . , Sterile Disposable Large Dressing Pack Tray With Galipot, Cotton Balls, Disposable Dressing Forceps, Dressing Pad, Gauze Swabs, Gloves, Sterile Field, Hand Wipe Tissue, Bandage Roll And Disposal Bag , Sterile Disposable Medium Dressing Pack Tray With Galipot, Gauze Swabs, Dressingpad, Dressing Forceps, Cotton Balls, Hand Wipe Tissue, Disposal Bag And Gloves , Sterile Drum / Container20 Litre , Sterile Gauze Swabs 10X10cm 12 Ply With X-Ray Thread Pack Of 10 , Sterile Haemocoagulase Solution10mleye Drop , Sterile Medicated Collagen Particles10ml ( Approved By Dcgi ) . , Sterile Medicated Collagen Particles, 10 Ml , Sterile Medicated Collagen Sheet In Dry Form 10X10 . , Sterile Medicated Collagen Sheet In Dry Form 15X30 . , Sterile Native Collagen Sheets In Wet Formsize 10X10 . , Sterile Native Collagen Sheets In Wet Formsize 10X25 . , Sterile Native Collagen Sheets In Wet Formsize 15X30 . , Sterile Native Collagen Sheets In Wet Formsize 20X40 . , Sterile Powder Free Surgical Gloves Size - 6 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 6.5 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 7 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 7.5 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 8 ( Pair ) , Sterilized Polypropylene Mesh 10 Cm X 15 Cm , Sterilized Polypropylene Mesh 15 Cm X 15 Cm , Sterilized Polypropylene Mesh 30 Cm X 30 Cm , Sterilized Polypropylene Mesh 6 Cm X 11 Cm , Sterilized Polypropylene Mesh 7.6 Cm X 15 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 15 Cm X 15 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 35.6 Cm X 30 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 6.4 Cm X 11.4 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 7.6 Cm X 15 Cm , Sterlie Surgical Latex Gloves Beaded6, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 6.5, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 7, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 7½, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 8 Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 6, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 6.5, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 7, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 7½, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 8 Isi Mark . , Sternal Closure Implant Made Of Biocompatible Peek ( Polyetheretherketone ) Polymer With Consistent Tension Across Sternotomy Or Fracture Of The Sternum ( Pack Of 5 Bands ) , Stoma Bag Barrier Paste 60 Ml , Stone Basket : Flat Wire ( Stainless Steel ) , Stone Basket : Helical ( Stainless Steel ) , Stone Basket : Nitnol , Stone Basket Flexible , Straight Taper Point Surgical Suture Needles Size: 43Mm , Straight Taper Point Surgical Suture Needles Size: 64Mm , Streptomycin 0.75 Mginj. , Styllet -Adultsize , Styllet -Paediatricsize , Submicronic Eptfe, Anterior Side Is Monofilament Polypropylene Mesh, ( Bard Soft Mesh - Average Pore Size Of 2500-3000 Microns ) , Posterior Side Is 100% Submicronic Eptfe ( Sub Micronic Pore Structure < 1 Micron ) , Overlap Sub Micronic Eptfe Edges Protects The Edge Of Mesh From Visceral Attachment. Various Sizes , Sucral Fate 200 Ml Solution , Suctioncatheter ( Fr ) 10F , Suctioncatheter ( Fr ) 11F , Suctioncatheter ( Fr ) 12F, , Suctioncatheter ( Fr ) 14F, , Suctioncatheter ( Fr ) 16F , Suctioncatheter ( Fr ) 18F , Suctioncatheter ( Fr ) 6F, , Suctioncatheter ( Fr ) 8F , Suction Catheter ( Fr ) 6Fr , Suction Catheter ( Fr ) 8Fr , Sugamadex Vial 5Ml / 500Mg Injection , Sulfacetamide Eye Drops 20%10Mleye Drop , Sulfamethoxazole 100 Mg And Trimethoprim 20Mg Tab. , Sulfamethoxazole 400Mg And Trimethoprim 80Mginj. , Sulfamethoxazole 800Mg And Trimethoprim 160Mginj. , Sumag20g. Ointment , Sumag75g. Ointment , Sumag Oint. Spray , Sumitriptan 25Mg. Tab. , Suprapubic Catheter Set 16 Fr , Surface Disinfectant - 10 Minute Aldehyde Free Disinfectant Containing Potassium Mono Per Sulphate Powder 5Kg Packet , Surfacent5ml / Bovine With Natural Lavageinj. , Surfacent 2Ml / Bovine With Natural Lavageinj. , Surfacent 3Ml / Bovine With Natural Lavageinj. , Surgical Blade Size 11Pkt ( 100Pcs ) , Surgical Blade Size 15 Pkt ( 100Pcs ) . , Surgical Blade Size 22 Pkt ( 100Pcs ) , Surgical Blade Size 23 Pkt ( 100Pcs ) . , Surgical Blade Size 24 Pkt ( 100Pcs ) . , Surgical Blade Size 26 Pkt ( 100Pcs ) , Surgical Clipper- Cutting Height Should Be 0.21 Mm. Should Be Only Ixp-7 Waterproof-Rated Rechargebleclippers Fully- Ubmersible For Thorough Cleaning And Disinfection. Should Have Adeptar Usable In Wet Or / And Dry Clipping. 40 Degree Angled For Seamless Grip. Size- Neuro Clipper , Sensi Clipper , Surgical Cover Dressings Stich Bonded Hydrofiber Dresssings With 1.2% W / W Impregnated Ionic Silver With Sustained And On Demand Broad Spectrum Antimicrobial & Bactricidal Efficacy With High Exudate Management Capability And Self Adherent Waterproof Moist Wound Dressing Made Up Of Triple Hydrocolloid Elastomeric Polymer Matrixsize 9X10cm, 9X15cm, 9X25cm, 9X30 Cm, 9X35cm , Surgical Cover Dressings With Ionic Silver Stich Bonded Hydrofiber Dresssings With 1.2% W / W Impregnated Ionic Silver With Sustained On Demand Broad Spectrum Antimicrobial & Bactricidal Activity With High Exudate Management Capabilities Of Locking In Exudatesin Gelformand Self Adherent Waterpro Of Moistwound Dressing Made Upof Triple Hydrocolloidelastomeric Polymer Matrix Size 9X10cm, 9X15cm, 9X20 Cm, 9X25 Cm, 9X30cm, 9X35 Cm , Surgical Hand Wash, Didecyl Dimethyl Ammonium Chloride 1Gm., 1- Propanol 40Gm. Ph 6. 500Ml. Solution , Surgical Mini Drop 10X10 . , Surgical Pattie / Cottonoid Compressed Rayon Provides The Natural Softness, Absorbency And Pliability Of Cotton. Should Haverayon Fibers To Resist Shedding, Stretching Or Linting. X- Ray Detectable. Available In Sizes 3 X 3 ( 7.62Cm X 7.62Cm ) . , Surgical Pattie / Cottonoid Compressed Rayon Provides The Natural Softness, Absorbency And Pliability Of Cotton. Should Haverayon Fibers To Resist Shedding, Stretching Or Linting. X- Ray Detectable. Available In Sizes 1 X 1 ( 2.54Cm X 2.54Cm ) . , Surgical Skin Marker Pen With Scale , Surgical Sprit500ml Bottle , Surgical / Biopsy Gun- Jamshidi Bone Marrow Biopsy / Aspiration Needle Should Have Light Weight Handle With Bult-In Comfort Knob. Should Have Bevel Tip For Easy Coring Of Bone. Should Have Bevel Cannula Tip. Should Have Tapered Distal Cannula For Easy Recovery Of Sample. Should Be Us Fda Approved.8G*4, 11G*4, 11G*6, 13G*2, 13G*3.5 , Surgical / Drainge Catheter Kit- 15.5 Fr Silicone Catheter Witch Is Soft Flexible And Conforms To The Pleural Or Peritoneal Site Discomfort Comes With Polyester Cuff. Catheter Kit , Surgikit Drape Kit Contents: 3 X Surgeons Gowns ( Large ) , 6 X Hand Towels, 1 X Surgeons Cap, 2 X Nurses Hats, 1 X Patient Cap, 1 X Aperture Drape ( 160X210 Cm ) , 3 X Surface Drapes- Adhesive ( 60X80cm ) , 1 X Tegaderm Site Dressing, 3 X Hose Covers, 1 X Instrument Tray, 1 X Plast One Case Contains 6 Kits , Sustained Release Recombinant Human Growth Hormone 24Mg / Vial Inj. , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 0 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 0 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X35cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 2 / 0 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 2 / 0 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 3 / 0 2X75cm Black Braided Silk , Sutupak, 3-0, 3 X 45Cm , Sutupak; 1, 3 X 45Cm , Sutupak; 2-0, 3 X 45Cm , Suture 0 - Mersilksuture--- Cutting Needle , Suture 2-0 Silk Suture -- Cutting Needle , Suture Dyed Polyester Poly ( P-Dioxanone ) , 1, 36X36 Cm, 1 / 2 Circle Cutting 40Mm, 20 Anchors / Inch Biderctional Usfda Approved , Suture Free Securement Hydrocolloid Device For Picc Line Catheter . , Suture Free Securement Hydrocolloid Device For Umbilical Catheter . , Suture Needles Curved & 1 / 2 Circle Cutting All Size1 X 6 Needle , Swan Ganz Catheter , Switch Arterial Cannula --Bd 20 G , Synthetic Absorable Coated Poliglecaprone 25 With Irgacare Mp, 3 / 8 Circle Reverse Cutting Ps-1 Needle, 24Mm, 70Cm , Synthetic Absorable Coated Polyglactin 910 Usp Size 10 / 0 6.5Mm, 3 / 8 Circle Cs140-6 ( 150 Micron ) , 10Cms , Synthetic Absorable Coated Polyglactin 910 Usp Size 6 / 0 8Mm, 1 / 4 Micro Point Spatulated Da, 45Cms , Synthetic Absorable Coated Polyglactin 910 Usp Size 8 / 0 6Mm, 3 / 8 Micro Point Spatulated Da, 30Cms , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 0 90Cm Violet 40Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 1 90Cm Violet 40Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 2-0 75Cm Violet 26-30Mm 1 / 2 Circle Taper Point / Taper Cut ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 3-0 70-75Cm Violet 20-22Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2228 Size : 2, 1 / 2 Circle R B, 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2228Vs Size : 2, 1 / 2 Circle R B, 45Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2303 Size : 5-0, 1 / 2 Circle R B, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2304 Size : 4-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2304Vs Size : 4-0, 1 / 2 Circle Rb 20Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2305 Size : 4-0, 1 / 2 Circle R B, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2306 Size : 4-0, 3 / 8 Circle Cutting 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317 Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317Da Size : 2-0, 1 / 2 Circle R B & 1 / 2 Circle T C Da, 30Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317T Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2319 Size : 1, 1 / 2 Circle T C , Ob Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2338 Size : 0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2341 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2342 Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2343 Size : 1, 1 / 2 Circle R B Heavy, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2344 Size : 0, 1 / 2 Circle R B Heavy, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2345 Size : 2-0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346 Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346A Size : 0, 1 / 2 Circle R B, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Aa Size : 0, 1 / 2 Circle R B, 40Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Da Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Da / 180 Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Dat Size : 0, 1 / 2 Circle R B & 1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346T Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Vs Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Vst Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347A Size : 1, 1 / 2 Circle R Bheavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Aa Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da Size : 1, 1 / 2 Circle R B Heavy 1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 160 Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 160Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180 Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180N Size : 1, 1 / 2 Circle Rb Heavy 50Mm, Da, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180Rb Size : 1, 1 / 2 Circle Rb 40Mm, Da, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180T Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Dat Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Dat-N Size : 1, 1 / 2 Circle Taper Cutting 40Mm, Da, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347T Size : 1, 1 / 2 Circle R B.Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Vs Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Vst Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2350 Size : 1, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2359 Size : 1, 1 / 2 Circle R Bheavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2361 Size : 0, 1 / 2 Circle T C Heavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2362 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2363 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2364 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2364Vs Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2382 Size : 2-0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2382A Size : 2-0, 1 / 2 Circle Rc 40Mm, 45Cms 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2401 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2407 Size : 3-0, 3 / 8 Circle R C ( Undyed ) , 26Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421 Size : 1, 1 / 2 Circle R C Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421A Size : 1, 1 / 2 Circle Rc 40Mm, Or Needle, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421Da-Or Size : 1, 1 / 2 Circle R B & 1 / 2 Circle R C Or Needle, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421T Size : 1, 1 / 2 Circle Rc 40Mm, Or Needle, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2422 Size : 0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2437 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2437Dasize : 3-0, 3 / 8 Circle Rb 22Mm, Da, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2438 Size : 1, 1 / 2 Circle R C Heavy, 50Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2442 Size : 5-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2448 Size : 1, 1 / 2 Circle R B Heavy, 50Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2465 Size : 4-0, 5 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2471 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2472 Size : 3-0, 1 / 2 Circle Cutting, 22Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2473 Size : 2-0, 5 / 8 Circle R B, 27Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2473Ldl Size : 2-0, 5 / 8 Circle Rb 27Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2478 Size : 2, 1 / 2 Circle Rc 40Mm, Or Needle, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2493 Size : 5-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2494 Size : 4-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2495 Size : 3-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511 Size : 2-0, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511A Size : 2-0, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511Aa Size : 2-0, 1 / 2 Circle T C, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511A-N Size : 2-0, 3 / 8 Circle Rc 45Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2512 Size : 0, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2512A Size : 0, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513 Size : 1, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513A Size : 1, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513Aa Size : 1, 1 / 2 Circle T C, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2515 Size : 3-0, 1 / 2 Circle T C, 17Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2516 Size : 3-0, 1 / 2 Circle T C, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2517 Size : 2-0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2517N Size : 2-0, 3 / 8 Circle Rc 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518 Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518N Size : 0, 1 / 2 Circle Tc 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518T Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518Vs Size : 0, 1 / 2 Circle T C, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518Vst Size : 0, 1 / 2 Circle T C, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2534 Size : 0, 1 / 2 Circle R C Or Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2546 Size : 0, 1 / 2 Circle R B, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2825A Size : 0, 1 / 2 Circle R C, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2826 Size : 1, 1 / 2 Circle R C, 23Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2826A Size : 1, 1 / 2 Circle R C, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2944 Size : 4-0, 3 / 8 Circle R C, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 945 Size : 2-0, 1 / 2 Circle R B Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 946 Size : 0, 1 / 2 Circle R B Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9132 Size : 3-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9133 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9201H Size : 5-0, 1 / 2 Circle R B ( Da ) , 13Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9210 Size : 1-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9221 Size : 1, 1 / 2 Circle Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9233 Size : 1-0, 1 / 2 Circle R B, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9234 Size : 1, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9235Sa Size : 1, 1 / 2 Circle T C, 30Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9237 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9248 Size : 1, 1 / 2 Circle R B, 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9261 Size : 1-0, 1 / 2 Circle R B ( Heavy ) , 50Mm, 150Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9262 Size : 1 Loop, 1 / 2 Circle R B ( Heavy ) , 50Mm, 150Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9304 Size : 4-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9352 Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9371 Size : 1-0, 1 / 2 Circle R B ( Heavy ) , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2160da / 160 Size : 1, 1 / 2 Circle Taper Cut Da , 3 / 8 Circle Rb , 40, 50Mm, 160Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2304 Size : 4-0, 1 / 2 Circle Rb , 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2304sp Size : 4-0, Straight Tp, 19Mm, 75Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317 Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317da Size : 2-0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 30Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317t Size : 2-0, 1 / 2 Circle Rb, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2338 Size : 0, 1 / 2 Circle Rb, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2340 Size : 3-0, 1 / 2 Circle Rb, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2345 Size : 2-0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346 Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346da Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346t Size : 0, 1 / 2 Circle Rb, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346vs Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180 Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180N Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 50, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180-Nn Size : 1, 1 / 2 Circle Rb Heavy, 1 / 2 Circle Tc Heavy Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180T Size : 1, 1 / 2 Circle Rb & 1 / 2 Circle Tc Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347n Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 115Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347t Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347vs Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347vss Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 125Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2350 Size : 1, 1 / 2 Circle Rb, 36Mm, 120Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2360 Size : 1, 1 / 2 Circle Rb, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2363 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2382 Size : 2-0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2401 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2404 Size : 2-0, 3 / 8 Circle Cutting, 26Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2421 Size : 1, 1 / 2 Circle R C Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2421t Size: 1, 1 / 2 Circle Rc Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2437 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2437a Size : 3-0, 1 / 2 Circle Rb, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2438 Size : 1, 1 / 2 Circle Rc , 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2438 Size : 1, 1 / 2 Circle Rc Heavy, 50Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2448 Size : 1, 1 / 2 Circle R B, 50Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2471 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2472 Size : 3-0, 1 / 2 Circle Cutting ( Undyed ) , 22Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2473n Size : 2-0, 5 / 8 Circle Rb, 27Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2494 Size : 4-0, 3 / 8 Circle Rc, 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2516 Size : 3-0, 1 / 2 Circle T C , 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2517ob Size : 0, 1 / 2 Circle Tc, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2518 Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2518da / 180 Size : 0, 1 / 2 Circle Tc, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2519 Size : 1, 1 / 2 Circle T C , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2534 Size : 0, 1 / 2 Circle R C Or Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2825 Size : 0, 1 / 2 Circle Rc, 23Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2826 Size : 1, 1 / 2 Circle Rc, 23Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2826a Size : 1, 1 / 2 Circle Rc, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2944 Size : 4-0, 3 / 8 Circle Rc, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures945 Size : 2-0, 1 / 2 Circle Rb, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures946 Size : 0, 1 / 2 Circle Rb ( Undyed ) , 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures947 Size : 1, 1 / 2 Circle Tp Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size - 0, 30Mm, 1 / 2 Circle Round Body, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 30Mm, 1 / 2 Circle Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 40Mm, 1 / 2 Circle Taper Cut, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 36Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Heavy Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Heavy Round Body, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Taper Cut, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size -1, 23Mm, 1 / 2 Circle Heavy Rc, 35Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 40Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 40Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Rb, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Rb, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Round Body, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Prime Cutting Ps-1, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Prime Cutting Ps-1, 70Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Rc Ps-1, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Rc Ps-1, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Primecutting, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Primecutting, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 36Mm, 1 / 2 Circle Taper Cut, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 36Mm, 1 / 2 Circle Taper Cut, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 4 / 0 20Mm, 1 / 2 Circle Rb, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 4 / 0 20Mm, 1 / 2 Circle Rb, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 36Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-1, 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Casting ( Fiberglass Casting ) 3 . , Synthetic Casting ( Fiberglass Casting ) 4 . , Synthetic Casting ( Fiberglass Casting ) 5 . , Synthetic Fast Absorbable Surgical Suture U.S.P.2516Rb Fast Size : 3-0, 1 / 2 Circle Rb, 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2718 F Size: 4-0, 3 / 8 Circle Rc Cirkum, 16Mm, 45Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2718Rb F Size: 4-0, 3 / 8 Circle Rb Cirkum, 16Mm, 45Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2732 Fast Size : 3-0, 3 / 8 Circle Rc, 26Mm, 75Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2760 Fast Size : 2-0, 3 / 8 Circle Rc, 26Mm, 75Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2761 Fast Size : 2-0, 1 / 2 Circle Rb, 38Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762 Fast Size : 2-0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762 Fs Size : 2-0, 1 / 2 Circle Tc Epicio, 35Mm, 100Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762Dy F Size : 2-0, 1 / 2 Circle Cutting Da, 30Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762F Vs Size : 2-0, 1 / 2 Circle Rb , 35Mm, 110Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2763 Fast Size : 0, 1 / 2 Circle Tc, 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2763 Fs Size : 0, 1 / 2 Circle Tc, 35Mm, 100Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2777 Fast Size: 2-0, 1 / 2 Circle Rc & 1 / 2 Circle Rb Da, 36Mm, 140Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2739 Fast Size : 3-0, 1 / 2 Circle Rb, 30Mm, 70Cm 1 Foils , Synthetic Nonabsorbable Surgical Suturewith Controlled Linear Elongation Process & Plastic Knot Deformitypolypropylene 3-0, 26Mm, 1 / 2 Circle Round Body Taper Point Sh, Ethalloy, Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity Polypropylene 3-0, 17Mm, 1 / 2 Circle Round Body Rb-1, Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 17Mm, 1 / 2 Circle Round Body Rb-1, Blue Monofilament Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 26Mm, 1 / 2 Circle Taper Point Sh, Ethalloy, Double Needle Blue Monofilament, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 6-0 , Tungsten-Rhenium’S Needle, 13Mm , 3 / 8 Circle, Tp, C-1 Double Needle, ( Blue 60Cm ) , , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 13Mm, 1 / 2 Circle Round Body Cc-4 Hemo-Seal Multipass, Double Needle, 75Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 5-0, 13 Mm, 3 / 8 Circle Cc -1 ( 320 Microns ) , Double Needle, 75Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 5-0, 9.3Mm, 3 / 8 Circle Cc Hemo-Seal Multipass, Double Needle, 60Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 6-0, 3 / 8 Circle Round Body, Visi-Black C-1, Ethalloy Needle, 13.0 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0 , Tungsten-Rhenium’S Needle 9.3Mm, 3 / 8 Circle, Bv 175-8 Cc Tp, Double Needle ( Blue 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0, 3 / 8 Circle Round Body, Visi-Black Bv-1, Ethalloy, 9.3 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0, Tungsten-Rhenium’S Needle, 8.0Mm, 3 / 8 Circle Tp, Bv, 175-6, Double Needle ( Blue 60 Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 8-0, 3 / 8 Circle Visi-Black Cc-175-6, 8.0 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 8-0, Tungsten-Rhenium’S Needle, 8.0 Mm, 3 / 8 Circle Tp, Bv, 175-6 Double Needle ( Blue 60Cm ) , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 4 No., ½ Circle Cutting Ccs, 48Mm, Length 4X45cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 5 No., ½ Circle Round Body Blunt Point, 44Mm, Length 75Cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 6 No., ½ Circle Round Body Blunt Point, 44Mm, Length 75Cm , Synthetic Nonabsorbable Surgical Suture, Nonabsorbable Polybutylate Coated, Polyester 5, No. 1 / 2 Circle Tapercut V-55, 55Mm, Green Braided, 75Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 17Mm, 1 / 2 Circle Taper Cut 2X V-5 Double Needle Green Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 17Mm, 1 / 2 Circle Taper Cut V-5 Double Needle White Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 26Mm, 1 / 2 Circle Taper Cut 2X V-7 Double Needle White Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 1 No., 1 / 2 Circle Taper Cut V-37, 40Mm, 4X 45Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 7 No., 1 / 2 Circle Cutting Ccs, 48Mm, 4X 45Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 6 No., 1 / 2 Circle 3- Needles Round Body 1 Conventional Cutting ( Ccs ) Blunt Point, 48Mm, Length 45Cm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 17Mm , 2-0, Green Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 17Mm , 2-0, White Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 26Mm , 2-0, Green Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 26Mm , 2-0, White Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 2-0, 26Mm, 1 / 2 Circle Tapercut V-5 Double Needle, 75 Cm Multistrand 5 Green & 5 White Strands In A Foil Ptfe Polymer Pledget 3Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 2-0, 17Mm, 1 / 2 Circle Tapercut V-5 Double Needle, 75 Cm Multistrand 5 Green & 5 White Strands In A Foil Ptfe Polymer Pledget 3Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 44.8 Mm Green 1 / 2 Circle Tapercut V-39 , 26Mm , 2 No., 75 Cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 2 No., ½ Circle Round Body Blunt Point, 40Mm, Length 45Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 26Mm, 1 / 2 Circle Taper Cut 2X V-7 Double Needle Green Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated, Braided Polyester, 2-0 , 17Mm, 1 / 2 Circle Taper Cut Sx Double Needle, 5-Green, 5-White Sutures, 75Cm With Pledgets ( 6X3x1.5 ) Mm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated, Braided Polyester, 2-0 , 26Mm, 1 / 2 Circle Tapercut Sx Double Needle, 5-Green, 5-White Sutures, 75Cm With Pledgets ( 6X3x1.5 ) Mm , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 1, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 2-0, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 3-0, 3 / 8 Circle Cutting Ps1 Prime, Multi Pass Ethalloy, 24Mm, 70Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Triclosan Coated, Undyed 1-0, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polypropylene 5-0, 17 Mm, 3 / 8 Circle Round Body Sh Double Needle , 90Cm , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732 Fast Size : 3-0, 3 / 8 Circle R C , 26Mm, 75Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732 / 70 Size : 3-0, 3 / 8 Circle R C , 26Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732A Fast Size : 3-0, 3 / 8 Circle R C , 26Mm, 45Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2735A Fast Size : 3-0, 1 / 2 Circle Cutting , 22Mm, 45Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762 Fast Size : 2-0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762A Eco Size : 2-0, 1 / 2 Circle T C , 35Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762F Vs Size : 2-0, 1 / 2 Circle T C, 35Mm, 110Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2763 Fast Size : 0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2763A Eco Size : 0, 1 / 2 Circle T C , 35Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2777 Fast Size : 2-0, 1 / 2 Circle R B &1 / 2 Circle Rcda, 36Mm, 140Cm 1 Foils , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 0 35Mm, 3 / 8 Circle Rc, 60Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 0 36.4Mm, 1 / 2 Circle Tc, 90Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 35Mm, 1 / 2 Circle Tc, 90Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 36Mm, 1 / 2 Circle Rc & 1 / 2 Circle Rb, 140Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 36Mm, 3 / 8 Circle Rc, 60Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 16Mm, 3 / 8 Circle Cutting, 45Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting Pc-3, 75Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 22Mm, 1 / 2 Circle Cutting, 70Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 75Cms , Syringe 1Ml For Inflatin And Deflation Occulaion Balloon System Cadence Precision Injector Syringe 1Mi. For Inflation & Deflation Of Occlusion Balioon System. Should Be Compatable With Item Of Sr. No 46 -50.Should Be Dcgi And Usfda Approved , Syringe 1Ml For Inflatin And Deflation Occulaion Balloon Systemcadence Precision Injector Syringe 1Ml. For Inflation & Deflation Of Occlusion Balloon System. Should Be Dcgi And Usfdaapproved , Syringes With Luer Lock 10Ml , Syringes With Luer Lock 20Ml , Syringes With Luer Lock 50Ml , Syringes With Luer Lock 5Ml, , Syringes Without Luer Lock 10Ml With 21 G Needle , Syringes Without Luer Lock 2 Ml With 24 G Needle , Syringes Without Luer Lock 5Mlwith 21 G Needle , T- Piece With Oxygen Tubing . , Tab. Dabigatran Etexilate ( 110Mg ) , Tab. Dabigatran Etexilate ( 150Mg ) , Tab. Rivaroxaban ( 10Mg ) , Tab. Rivaroxaban ( 20Mg ) , Tacrolimus 0.0003 Ointment , Tamsulosin ( 0.4Mg ) + Dutasteride ( 0.5Mg ) Tab. , Tamsulosin ( 0.4Mg ) + Finasteride ( 5Mg ) Tab. , Tannic Acid ( With Glycerine ) Gum Paint 20% 15 Ml Vial. Solution , Taxes Micro Guide Catheter , Taxes Microguide Wire , Taylor Brace ( Regular ) S / M / L , Technology, Third Generation Npwt System Pu Foam Size 15 X26 X3.3Cm And Absorbent Cotton Gauze Swabs, Transparent Pu Drape, Disposable Scalpel And Gloves , Technology, Third Generation Npwt System, Pu Foam Size 12.5 X18 X3.3Cm And Absorbent Cotton Gauze Swabs, Transparent Pu Drape, Disposable Scalpel And Gloves , Teflon Pledgets 1 / 4, 1 / 8, 1 / 6 , Teflon Wire J Tip .025X150 & 260Cm , Tegaderm ( 8.5X10.5Cm ) , Tegaderm ( 8.5X10.5Cm ) Pack Of 50 , Telmisartan 20 Mg + Amlodipine 2.5 Mg + Hydrochlorothiazide ( Hctz ) 6.25 Mg Tab. , Temporary Pacemaker Dual Chamber , Temporary Pacing Wire 60Mm, Electrode Blu 60Cm, 17Mm 1 / 2 Circle Tapercut & 60Mm Straight , Temporary Pacing Wire 90Mm, Electrode Blu 60Cm, 26Mm 1 / 2 Circle Tapercut & 60Mm Straight , Tenceteplace 50Mg.Inj. , Tenecteplase 30Mg. Inj. , Tenecteplase 40Mg. Inj. , Tension Free Viganal Tape 1.1Cm X 8Cm Soft Polypropylene Mesh , Tension Free Viganal Tape 10Cm Wide X 45Cm Length With 2 Helical Passer For Inside Out , Tension Free Viganal Tape Medurethral Approach, Sling Of 1.1Cm X 8Cm Soft Polypropylene , Terbinafine 200Mg. Tab. , Terbinafine Hydrochloride 0.01 Ointment , Terbutaline Sulphate 2.5Mg Tab. , Teriparatide 250 Mcg / Ml 3Ml Vail Inj. , Terrumo Progreat Microcatheter 0.024 Inch , Terumo Guide Wire 0. 035 X 150 Cm J , Terumo Guide Wire 0. 035 X 260 Cm J , Terumo Guide Wire 0. 035 X 260 Cmst Tip , Testosterone Undecanoate 40 Mg Cap. , Tetanous Immuglobulin Human 1000Iu Inj. , Tetanus Immunoglobulin Usp 250 Iu / Vial Inj. , Tetanus Immunoglobulin Usp 500 Iu / Vialinj. , Tetanus Toxide0.5Ml Ampouleinj. , Tetra Starch 6%Ffs Bottle 500 Ml Iv , Tetrabenazine 25Mg. Tab. , Tetracycline 250Mg. Cap. , Thalidomide Cap. , The Codman Scalp Clip Applier Is A Sterile, Single-Use System Designed To Apply Scalp Clips To The Scalp Flap. Comes With Pre-Loaded Scalp Clips, Permits Rapid Application Of Scalp Clips, Provides Adequate Hemostasis. . , The Deviseshould Be Classified With Respect To Electrical Shock, Fire And Mechanical Hazards In Accordance With: Ul60601-1, Es60601-1:2005 And Standards Classified With Can / Csa C22.2No.60601-1:08 , Theophyline 25.3 Mg 3 Ml Inj. , Therapy System With Pressure Setting 05Cmx25cm Pu Foam, 45Ml Canister, 3 Layer Drape And Silicon Dressing , Thermosensitive Endotracheal Tube - The Usfda Approved Endotracheal Tube Made Of Ruschelit™ Pvc Technology With Right Degree Of Stiffness I.E. Thermosensitive, Flexibility, And Kink Resistance. Comply With Astm Standard Requirements And Are Marked Withf29 Notation. Tubes Feature An Outstanding I.D. To O.D. Ratio. Available In A Full Range Of Paediatric And Adult Sizes Starting From 2.5Mm In Cuffed & 2Mm In Uncuffed. No Latex Contents. , Thiocolchicoside 4 Mg+Aceclofenac 100 Mg Tab. , Thiocolchicoside 8 Mg+Aceclofenac 100 Mg Tab. , Thiopentonesodium ( 500 Gm ) -- Vial Injection , Thoracic Cathetermade Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Size - 24 , Thoracic Cathetermade Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes -28, 32 , Thoracic Catheter Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Size - 24 , Thoracic Catheter Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracicdrainage. Sizes -28, 32 , Thoracic Catheterright Angle ( 90° ) Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes: 24, 28, 32 , Thoracic Catheterright Angle ( 90° ) Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes: 24, 28, 32 , Thoracic Drinage Sets , Three Way Stop Cock . , Threeway Stop Cockwith Leur Lock , Thrombophob Ointment , Thrombus Cutter Catheter , Thymoblobulin Rabbit 25 Gm , Thymocyte Globulin Inj. , Thyroxine Sodium 0.25 Mg Tab , Tianeptine Sodium 12.5 Mg Tab. , Ticagrelor 60Mg. Tab. , Ticagrelor 90Mgtablets , Timolol Moleate - 5Ml 0.25% Eye Drop , Tinidazole300 Mg Tab. , Tinidazole500mg Tab. , Tinidazole Powder For Susp 150Mg / 5Mlsyp. , Tirfiban 5 Mg / 100 Ml Inj. , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 10X15 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 15X15 Square , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 15X20 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 20X25 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 7.5X15 Rectangle , Tissue Stabilizer For Beating Heartshould Be A Low Profile Tissuestabilizer With Auto Spreadfeature Of Pods. , Tissue Stabilizer For Beating Heart Should Be A Low Profile Tissuestabilizer With Auto Spreadfeature Of Pods. , Titanium Clip Applier For Large Size Titanium Clip ( 6.2X12.5Mm ) , 26.7 Cm Long For Open Surgery , Titanium Clip Applier For Medium Size Titanium Clip ( 3.2X5.2Mm ) , 19.0 Cm Long For Open Surgery , Titanium Clip Applier For Medium / Large Size Titanium Clip ( 5.5X8.8Mm ) , 26.7Cm Long For Open Surgery , Titanium Clip Applier For Small Size Titanium Clip ( 2.6X3.4Mm ) , 19.0Cm Long For Open Surgery , Titanium Liga Clips Set Of 10 , Titanium Ligating Clip For Laparoscopy , Titanium Ligating Clip For Laparoscopy Large , Titanium Ligating Clip For Laparoscopy Medium , Titanium Ligating Clip For Laparoscopy Small , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Tmt Graph Paper A4 Size, 100 Piece / Pkt. , Tmt Paper Uniem Concept Aprop. . , Tmt Stickers . , Tobramycine60 Mginj. , Tobramycine + Loteprednoleye Drops 5Ml Eye Drop , Tolperisone150mg Tablets , Tolperisone Sr 450 Mg Tab. , Tolvaptan 15 Mg Tablets , Tolvaptan 30Mg Tablets , Toomey Glass Syringes; 100Ml , Toomey Glass Syringes; 50Ml , Topiramate 100 Mg Tab. , Topiramate 25 Mg Tab. , Topiramate 50 Mg Tab. , Torasemide 20 Mginj. , Torsemide 100 Mg Inj. , Torsemide Tablets , Tpi Lead 5, 6F Balloon Tiped , Tr Band , Tracheostomy Tube ( Pvc ) Sterile Single Use - ( Adult ) ( Size 7 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each ) , Tube , Tracheostomy Tube ( Pvc ) Sterile Single Use - ( Adult ) ( Size 8 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each ) , Tube , Tracheostomy Tube With Inner Canula Brush. All Size , Tracheostomy Tubes Cuffed All Size , Tracheostomy Tubes Fuller Jaction All Size , Tracheostomy Tubes Plain All Size , Tramadol + Paracetamol 50+500Mg Tab , Tramadol 37.5+ Dicyclomine Hydrocloride 20 + Pracetamol 325 Tab. , Tramadol 50Mgcap , Transducer For Intraparenchymal Icp Measurement ( Disposable ) , Transducer Protector , Transobturator Tape Sling 45 Cm Length. , Transparent Non Adherent Intra Venous Fixation Device Size 3Cmx3cm , Transparent Non Adherent Intra Venous Fixation Device Size 3Cmx3cm , Transpore Surgical Tape 2.5Cmx 9.1 Meter , Travoprost 0.004 %W / V, 5Ml Eye Drops , Travoprost 0.004% 3Ml Eye Drop , Travoprost Ip 0.004%W / V + Benzalkonium Chloride Solution Ip 0.02%V / V ( As Preservative ) Eye Drop , Tretinoin 0.1 %W / W, Gel , Tretinoin Usp 0.04% W / W ( As Redispheres ) In Aqueous Gel Base, Preservative: Sorbic Acid Ip 0.1% W / W Benzyl Alcohol Ip 0.5 % W / W, Tubeointment , Triamcinolone Acetonide ( 0.1% W / W ) In Buccal Pastointment , Trichlor Acetic Acid Crystal ( 1 Kg ) Solution , Trichloroacetic Acidointment , Tricholine Citrate 0.275 G , Sorbitol 7.15 G / 10 Ml ( 200Ml ) Syp. , Triclofos Sodium 500 Mg Syp. , Triclofos Sodium Bp 500 Gm In A Flavoured Syrup Base Bottle Of 30 Ml Syp. , Trifluoperazine 5 Mg Tab. , Trineptin 12.5 Mg Tab. , Trioxalen5 Mg Tab. , Trioxalen 25 Mg Tab. , Trioxaleneointment , Triple Layer Molded Face Masks - Fluid Resistant, Latex Free, 50 / Pkg - , Triple Lumen -- Cvc 4.5 Fr / 6 Cm , Triple Lumen -- Cvc 5.5 Fr / 8 Cm , Triple Lumen Catheter Full Set With Rolleson Syringe. , Triple Lumen --Cvc7fr / 12Cm , Triple Lumen --Cvc7fr / 15Cm , Triple Lumen Hd Cath 11Fr , Triple-Lumen Tip To Prevent Clogging Inside The Applicator , Waterproof Transparent Film Dressing Size 6Cm Dia With 3.5 Cm Dia Non Adherent Absorbent Pad , Tripong Forceps For Pcnl , Tripong Forceps For Ursl , Triway Cannuala . , Trucut Biopsy Needle 18 G Length 15 Cm , Trus Guided Prostate Biopsy Gun; Coaxial, Trucut, 18G, 25Cm , Trypan Blue Solution1 Ml Eye Drop , Tryphan Blue Vials Inj. , Trypsin-Chymotrypsin 50000 Au+Diclofenac 50 Mg Tab , Ttravoprost - Timolol 5Ml Eye Drop , Tube Ex Changer With Insertion Aid In One With 15Mm Connectors And Lure Lock Connections Should Have Depath Mark- Sizes - 2.5, 6.0 . , Tube Kojic Acid 2% W / W Arbutin 1.5 % W / W Mulberry Extract 1 % W / W Octinoate 7.5 % W / W Tube Of 15 Gm 1. , Tulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Tur Set , Tur Sets For Irrigation, Y Shape , Tur Silicon Tubings , Turp Drape; Turp Drape With Release And Absorbent ( 60 Gsm Sms 228 Cm X 178 Cm 5 / Cm Width Release 229 Cm Absorbent Layer 112 Cm X 92 Cm With Release Paper 38 Cm X 38 Cm , Turp Set. , Turpentine Oilointment , Twister Guide Wire , Two Stage Venous Cannulamultiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr. , Two Stage Venous Cannula Multiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr, 36 / 46Fr. , Two Stage Venous Cannula Multiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr. , Typhoid Vaccine Ui25 Mgc Inj. , Tyshak Balloon / Atlas Balloon 20-30Mm , Ultra Guard With 0.02 Micro Pall Filter. , Ultra Sound Jelly 250Ml Bottle . , Ultraflux Av 600S; Effective Surface Area 1.4 Sqm ;Wall Thickness 35 Micrometer;Membrane Polysulphone , Housing Material Polycarbonate , Potting Compound Polyurethane With Inline Steam Sterilisation;Inner Wall Thickness 220 Micrometer;Blood Filling Volume 100 Ml , Ultrasound Thermal Printer Rolls . , Ultraverse 014 -Btk Balloon 014 Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushabilitydiameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm. , Ultraverse 035Atk Balloon 035 Geoalign™ Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm*Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm , Umbilical Cotton Tape Sterile76 Cm X 3 Mm X 2 , Umbilical Cotton Tape Usp 2 Mm Wide X Length 75Cms , Uncoated Bi-Layer Lets Of Paracetamol Ip Er 675 Mg Tab. , Uncoated Bi-Layer Lets Of Paracetamol Ip Ir 325 Mg Tab. , Uncoated Low Profile Lightweight Monofilament Polypropylene Mesh Allows Complete Tissue In Growth , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges. Left Side, Medium Size:8.5 Cm X13.7 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Left Side, Extra Large Size: 12.4 Cm X17.3 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Left Side, Large Size:10.8 Cm X16 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Right Side, Extra Large Size: 12.4 Cm X17.3 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Right Side, Large Size:10.8 Cm X16 Cm , Ureteral Catheter , Ureteral Dialator Set ( Teflon ) ; Serial Teflon Dialator, 6Fr To 16 Fr , Ureteral Indwelling Double Pigtail Stent, Both End Open / One End Closed ( D J Stent ) Sizes - 3, 3.5, 4., 4.5, 5.5, 6, 6.5, 7, 8, 9, 10F , Ureteral Stent Or Double J Stent , Ureteric Balloon Dilator; 5Cm, 15F, Burst Pressure 20 Atm , Ureteric Catheter - 6 Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 3Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 5Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 6Fr, Straight Tip, 70Cm, Open Ended , Ureteroscopic Stone Retrieval Forceps, 3, 4 Fr, Triprong , Urethral Catheter Made Up Of Soft Color Less, Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes- 6, 8. , Urethral Catheter Made Up Of Soft Color Less, Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes-14, 16, 18, 20. , Methacrylate Based Oxygen Permeable Non Adherent 3 Dimensional Transforming Powder Dressing Size-4X4 , Urethral Stent , Urinary Drainage Bag ( Uro Bag ) 1 Lit . , Urinary Drainage Bag 2 Litre Cap With Non Return Valve ( Clinical Grade Pvc Sheet And Specially Designed Hook Facilities ) . , Urinary Drainage Bag 2 Litre Cap With Non Return Valve ( Eo Sterile ) , Urinary Drainage Bag 2 Litre With Uroflow Meter , Urine Sugar Kitone Diagnostic Stick 50 Strip , Uro Bag 100Ml ( Urine Collecting Bag With Measuring & Self Adhesive Facility ) . , Urograffin 76% Solution For Injection 50Ml Vial Bottle , Urokinase 5000 Iu Catheder Flushing Inj. , Ursodeoxy Cholic Acid 75 Mg Tab. , Usg Guided Kidney Biopsy Gun 16 G , Usg Guided Kidney Biopsy Gun 16G , Uv Protection Eye Cover With Adjustable Harnace, Double Protection Uv Filter, Absorbent Inner Layer, Ce Certified. ( With Uv Protection Certtificate. ) . , Vaccum Jar , Vaccum Outlet , Vaku 8 ( Vaccume Blood Collection Tube ) . , Vancomycin + Cefriaxone 1.5 Mg Inj. , Vancomycin 125 Mg Tablets , Varicose Veins Stockings S / M / L , Vascularhaemostatic Pad To Stop External Bleeding And Catheterization Site Bleeding , Chitosin Material, Size-2X2 Single Pack. Sterilized. . , Vascular Closer Device , Vascular Graft ( Ptfe / Ringed Ptfacron ) For Restoring Vascular Continuity, [ Straight Configuration ] Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Graft ( Ptfe / Ringed Ptfacron ) ( Y Configuration ) .Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Graft ( Ptfe / Ringed Ptfe / Dacron ) ( Y Configuration ) .Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Hemostatic Dressing In Sponge / Pad Form Made Of 100% Natural Biopolymer With A Net Positive Charge, Gama Sterilize, Moisture Proof Packing. Ce, Usfda Approved. Sizes- 10*10, 8*8, 5*5, 8*5. , Vasopressin Ection 40 Iu / 1Ml ( Pfs ) Inj. , Vecuronium Bromide Inj 2Mg / Ml ( 2Ml Amp ) , Venlaflaxine 150 Mg Cap. , Venlaflaxine 37.5 Mg Cap. , Venlaflaxine Sr 150 Mg Cap. , Venlaflaxine Sr 75Mg Cap. , Venous Stent- Self Expanding, Nitinol Based, Should Be Designed Specifically For The Venous System, Should Be Self Expanding, Nitnol Based, Tri Axial Catheters And Dual Speed Thumbwheel System For Smooth And Controlled Stent Deployment , Ventricular External Csf Drainage System Contains One Bag 30Cm. Ventricular Catheter With Stylet, Connector, Trocar, Catheter, Anchoring Coller And Connecting Tube. . , Verapamil40 Mg Sugar Coated Tab. , Verapamil80 Mg Sugar Coated Tab. , Verapamil 5 Mg / 2 Ml Inj. , Vessel Cannula With And Without Valve.Should Have Clear And Radiopaque Bodies, With A Female Luer, Beveled And Blunt, Sizes- 3Mm, 4Mm , Vessel Cannula With And Without Valve. Should Have Clear And Radiopaque Bodies, With A Female Luer, Beveled And Blunt, Sizes- 3Mm, 4Mm , Vessel Sealer Rf-60 Proobs - Etrio 314H. , Vessel Sealer Rf-60 Proobs - Etrio 325H. , Vessel Sealer Rf-60 Proobs - Etrio 335H. , Vessel Sealer Rf-60 Proobs - Nseal514 Rh . , Vessel Sealer Rf-60 Proobs - Nseal525 Rh . , Vessel Sealer Rf-60 Proobs - Nseal535 Rh . , Vi B110mg, Vi B2 10Mg, Vi B6 3Mg, Vi B12 15Mcg, Nicotinamide 45Mg, Calcium Pantothenate 50Mg Tab. , Vibratory Positive Expiratory Pressure Device For Bronchial Hygiene Therapy With Green And Blue Color Coded , Vicryl 1 Cutting Body , Vicryl 2-0 Round Body , Vicryl 3-0 Round Body , Vicryl -Size - 1 ( 4.0 Metric ) 40Mm, 1 / 2 Circle Reverse Cutting, ( Os-8 ) 70Cm. , Video Camera Cable Cover Ultra Sound Cover ( Size-15X250cm. ) . , Vit A Syp 100000 Unit / Ml ( 100 Ml Bottle ) Syp. , Vit B12 500 Mcg / Ml 30 Ml Vail Inj. , Vit. E400 Mg Cap , Vitamin - B1 10Mg + B2 10Mg+ B6 3Mg+ B12 15Mcg+ Niacinamide 100Mg+ Calcium Panthenol 50Mg+ Folic Acid 1.5Mg+ Vitamin C 150Mg+ Biotin 100Mcg Tab , Vitamin A - 50000Iu Injection , Vitamin A ( Soft Gelatin ) 50000 I.U Cap , Vitamin A Cap Usp Soft Gelatin Capsule 1 Lakh Iu Tab. , Vitamin A Inj. , Vitamin A Usp Soft Gelatin Sule Each Contains Vitamin A-2 Lac Iucap. , Vitamin B12, 500Mg. Inj. , Vitamin C-100Mg Tab , Vitamin D Sachets 60000 Iu Sachet , Vitamin D3 1000Iutab. , Vitamin D3 2000Iutab. , Vitamin E 200 Mg Capsule , Vitamin. Asyrup. 200Ml Syp. , Vitamin. E400mg Cap. , Vitamin-C, 50Mg + Elemental Iron 30Mg + Folic Acid 200 Mcg + Vitamin B12 0.75 Mcg Film Coated Tablet Tab. , Voldyne Spirometer-Hand Held ( Built-In Handle ) Spirometer With 5000 Ml & 2500Ml Capacity To Measure Inspired Volume ( Volume-Oriented Device ) To Allow Accurate And Easy Recording Of Adult & Pediatric Patient Progress, Flow Rate Cup To Promote Slower Inhalation And Provide Effective Distribution Of Air To All Parts Of The Lung, Individually Calibrated And Tested, Graduations Printed On Both Sides Of Unit With Mouthpiece And Tubing , Volume Incentive Spirometer Oxygen Port. . , Voriconazole 200Mg / Vials Injection , Vp Shunt . , Vpmp Shunt , Warfarin 1Mg Tablets , Warfarin 2.5 Mg Tab. , Warfarin 2Mg Tablets , Warfarin 5Mgtablets , Water Bed . , White Field Ointment Jar 500Gm , White Petroleum Jellyointment , White Threat Coat Make No 10 , White Threat Coat Make No 40 , Winged Infusion Set With Injection Site 20 Gauge X 0.75 Inch . , Winged Infusion Set With Injection Site 20 Gauge X 1.00 Inch . , Winged Infusion Set With Injection Site 20 Gauge X 1.50 Inch . , Winged Infusion Set With Injection Site 22 Gauge X 1.00 Inch . , Winged Infusion Set With Injection Site 22 Gauge X 1.50 Inch . , Wound Irrigation Gel 30 Ml Pvc Free, Dehp Free Tube Containing 0.1% Polihexanide And 0.1% Betaine And Glycerol , Wound Irrigation Solution 350 Ml Pvc Free, Dehp Free Bottle Containing 0.1% Polihexanide And 0.1% Betaine , Wound Irrigation Spary Dressing Containing Silver In The Form Of Silver Nitrate, Peppermint Oil, Glycerol, Buffer & Tween 20, 100Ml , Wound Manager Drain Pouch With Skin Barrier 104-160 Mm / 160-208 Mm / 208-297 Mm , Wound Suctionset No 12 . , Wound Suctionset No 14 . , Wound Suctionset No 16 . , Wound Suction Set No. 18 . , Wrist Forearm Splint ( Left & Right ) S / M / L , Wypoll 10 Pcs With Bacto Foam 180 Ml. Spray , Xanthinol Nicotinate150 Mg Tab. , Xience Xpedition Stent Complete Sizes Sequence , Xpedionmicroguide Wire , Xpedion Micro Guide Catheter , X-Ray Draier , X-Ray Film ( Blue Sensitivity ) 10*12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 12*12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 12*15 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 14*14 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 14*17 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 6 * 12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 6.5 * 8.5 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 8 * 10 ( 50 Sheet Packet ) , X-Ray Lead Apron Heavy , Xylocaine 4% Injection , Xylocaine Spray 10%50Ml. Spray , Xylocan Spary 2% Spary , Y Connector Push & Click , Yankar Suction Catheter . , Yankauer Suction Set ( With Tube & Suction Handle ) , Yankauer Suction Setyankauer Suction Handle With Flexible Kink-Resistant Tube , Y-Connector , Yukon Choice Flex Stent Complete Sizes Sequence , Yukon Choice Pc Stent Complete Sizes Sequence , Z-Fold Paper ( 150 Sheet Packet ) A4-Size Paper , Zinc 50Mg. Tab. , Zinc Sulfate Monohydrate 20Mg Tab. , Ziprasidone20 Mg Tab. , Ziprasidone40 Mg Tab. , Ziprasidone50 Mg Tab. , Zoledronate 5 Mg / 100Ml Inj. , Zuclopenthixol 200 Mg. Inj. , Zuclopenthixol 50 Mg Inj.
Contract Date: Feb 06, 2026 Contract Value : ₹ 70
Boards / Undertakings / PSU No of Bidders 32
Madhya Pradesh View Result →
26.
Rural Development #9369129 Technical Bid
Tender For Constructing Liquid Waste Management Project At Rethre Bk. Tal Karad Dist Satara - LWM Under SBM Rethare Bk. Tq-Karad, Dist-Satara - Large Compost Pits 7 Nos- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) 2 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) 3 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) 4 Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B- 7, Page No. 38 5 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete. 6 Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 7 Leach Pit (3 Nos)- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) 8 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) 10 Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B- 7, Page No. 38 11 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete. 12 Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 13 Providing and fixing concreate manhole cover and light/medium/heavyduty with frame etc. complete. 14 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 15 Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 6 to 12.5 Kg./Sq.cm. 110 mm. 16 400 KLD STP- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete 0.0 to 1.5 m 17 3.0 to 4.5 m 18 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259) 0.0 to 1.5 m 19 1.5 to 3.0 m 20 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) 1.5 to 3.0 m 21 3.0 to 4.5 m 22 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) 3.0 to 4.5 m 23 Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) 24 Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B- 7, Page No. 38 25 Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) 26 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) 27 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17/306) c) Corrosion Resistant Steel (Fe 500) 28 Providing and fixing mild steel grill work for windows/ ventilators of 20 Kg/Sqm. As per drawings including necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, etc. complete. (Bd-U-1/537) 29 Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-3/275) 30 Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B .W .G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts , lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 kg/sq.m.). 31 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete. 32 Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 33 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:11 / 2:3 including scaffolding and fourteen days curingcomplete. 34 Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. 35 Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete. 36 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. 37 Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) 38 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. 39 Transportation as per STATEMENT VI Including loading, unloading and stacking Earth (4.8 Cum) lead 15 Km 40 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 41 Fine and Coarse Screen (Manual) of size 1.65 m length x 0.5 m width of SS 304 MOC and Manual hand rake for cleaning screen of SS handle 1 m in length and cleaning area of 6 nos 5 mm SS rod of total length 200 mm straight and 50 mm of 90 degree bend. 42 Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 1 HP (Up to 9000 LPH) 43 Erection 44 Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 3 HP (Up to 18000 LPH) 45 Erection 46 Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 3 HP (Up to 18000 LPH) 47 Erection 48 Pressure Sand Filter of FRP / MSEP vessel with suitable thickness to withstand a water pressure including MPV or 5 Valve system and PVC / UPVC / MSEP interconnecting and underdrain piping including fittings, with standard filter media layer with minimum depth of filter sand 1.0 m supported by gravels. The piping arrangement should provide sufficient pressure for backwash operations and avoid loss of sand during backwash operation. Suitable openings to be provided to ease addition and removal the media. Dia 1.7 m x 2 m minimum height 49 Activated Carbon Filter of FRP / MSEP vessel with suitable thickness to withstand a water pressure including MPV or 5 Valve system and PVC / UPVC / MSEP interconnecting and underdrain piping including fittings, with standard filter media layer with minimum depth of Activated Carbon 1.0 m supported by gravels.The piping arrangement should provide sufficient pressure for backwash operations and avoid loss of Activated carbon during backwash operation. Suitable openings to be provided to ease addition and removal the media. Dia 1.7 m x 2 m minimum height 50 NaOCl ChlorinatorPump Diaphragm Type / peristaltic type / Solenoid / Max Flow Rate Upto 10LPH Power Source Electric - Phase Single Material PP / PTFE(Teflon) / Voltage 230 Volt / Frequency 50Hz / Mixing Tank of 25 Ltrs capacity- 1 No / Dosing Pump- 2 Nos 51 Providing & erecting floor/wall mounted MCCB panel board, with door, suitable for four pole incoming 250A, 2 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs) 52 Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. > 7.5 HP & Up to 12.5 HP 53 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. 3 core 16 sq mm 54 Erection 55 Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cable Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner.4 Core 6 sq mm 56 Erection 57 Copper conductor PVC insulated, Unarmoured control cable Supplying and erecting Un-armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner. 4 core 2.5 sq mm 58 Erection 59 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).Working Pressure 8 Kg/Sq.cm 63 mm. 60 PVC Specials- 10% 61 40mm 62 PVC Specials- 10% 63 75 mm. 64 PVC Specials- 10% 65 20 mm 66 PVC Specials- 10% 67 63 mm. 68 PVC Specials- 10% 69 Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance fromstores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). 63 mm. 70 75 mm. 71 Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm. 72 75 mm. 73 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves - PN -1 (Without by pass) 65 mm. 74 65 mm. 75 Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement -PN -1 65 mm. 76 65 mm. 77 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of alllabour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.(Rate for all class of valves.) 65 mm. 78 Reflux valves (non-return valves ) 79 Supplying ofSpecially designed container for holding Bio media including mixture of cocohusk,bacterial culture with special worms per designed quantity including transportation & fixing in position as directed etc. complete. 80 Stone Aggregate - 40mm, 20 mm, 10 mm and 5 mm 81 Transportation as per STATEMENT VI Including loading, unloading and stacking Earth (4.8 Cum) lead 15 Km 82 Additional Sump-Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypass arrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to allexpose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure.MJP/ SSR/Corrigendum No.8/2021-22/SECTION - K : RCC GSR Item No.1 / Page no.8dated on 10/03/2022 83 Addition of 7.5% Raft Foundation 84 Addition of 5% Seismic zone 85 Addition of 5% sugar cane area 86 Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 3 HP (Up to 18000 LPH) MJP/SSR/EM/22-23/Item No. PM 9-1-1/Page No. 4,5 87 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 110 mmMJP/ SSR/Corrigendum No. 10 /21-22/SECTION -P.V.C. PIPES, Page no.3 dated 18/07/2022 88 Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
27.
Public Administrative Department #9349229 Technical Bid
Development Of Kasturba Nagar Walkway Under Urbs Panampally Nagar Kochi-- 1 SITE CLEARANCE ,COMPOUND WALL & FENCING WORKS 2 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 3 2.28.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil 4 15.6 Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved 5 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 6 od148366/2024_2025 DR rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand DR 7 5.1.3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8 5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide 9 5.22.1 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars 10 50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 11 13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 12 16.78.2 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 13 50.2.26.1 Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. 14 16.70.2 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade. 15 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 16 13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 17 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 18 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 19 od143791/2024_2025 Petty works at site, coolie 20 30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment). 21 SEATING WORKS 22 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 23 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 24 50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 25 13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 26 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm 27 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 28 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 29 od225918/2024_2025 Brick cladding work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.25mm thick brick tile 30 50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete 31 od237082/2024_2025 Supplying, Providing & placing of park seating benches with cast iron frame with wooden seating and of size 60 L, 16W, 20 H at site with primer and required finishes of paint including loading, unloading, carriage etc.and as per direction of officer in charge. 32 LANDSCAPING WORKS 33 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 34 2.1.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 35 60.7.1 DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 36 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 37 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 38 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 39 6.2.2 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand) 40 13.66.1 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work 41 5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide 42 5.1.3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 43 5.22.1 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars 44 4.6.1 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1.5:3 ( 1 cement : 1.5 coarse sand (Zone III): 3 graded stone aggregate 20 mm nominal size) 45 13.52.2 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work 46 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm 47 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 48 13.4.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) 49 13.45.1 Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 50 od143791/2024_2025 Petty works at site, coolie 51 od151619/2024_2025 providing ,supplying and installing waste bins with steel sheet covered with recycled plastic materiails as per required shape and colour 52 od151698/2024_2025 making , installing name board letters in acrylic material with steel pipe framing as per required design and dimensions. 53 od227248/2024_2025 Cleaning the surface and removing dirt,dust,greese,oil,algae,fungus including washing the surface with the help of required srubbers and cleaning with machine operated water jet etc. Without causing any damage to the existing structure 54 od227600/2024_2025 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of required shade and colour for inuaguration stones at carious parks 55 16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 56 16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 57 16.84 Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.) 58 22.12 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. 59 od233545/2024_2025 Providing and placing of Cycle Track as per specific grade M-25 decor concrete of average thickness of 100 mm, fiber used as re-inforcement 600gm/M3 level and finish the concrete by using straight edge vibrator with the screed action, Finish the concrete surfce by using Magnesium bull float, Expansion joint should be provided at 4.50 M interval, At top layer colour hardener should be provided and level with magnesium float, including markings, curing, etc. complete as per the direction of Engineer-in-charge. 60 GARDENING WORKS 61 od143766/2024_2025 Planting HIBISCUS RED by Digging pit in all kinds of soil and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and planting trees supplied with roots covered with appropriate natural containers from the source of availability including all conveyance, transported without any damage to the root pods, covering the stem with necessary hay etc., caring and protecting the plants transported and unloaded at site till planting in pits of size 120 cm diameter, and 120 cm deep, HIBISCUS RED . Appropriate Length of softwood props shall be provided as supports for the plants as directed. The trees have to be maintained for a period of 3 months after the entire planting of trees is completed. The Rate shall include necessary labour, supply of materials, safe keep of plants, cost of conveyance, removal of rubbish and surplus earth etc. Complete.HIBISCUS RED 62 od143767/2024_2025 Planting trees by Digging pit in all kinds of soil and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and planting trees supplied with roots covered with appropriate natural containers from the source of availability including all conveyance, transported without any damage to the root pods, covering the stem with necessary hay etc., caring and protecting the plants transported and unloaded at site till planting in pits of size 120 cm diameter, and 120 cm deep, MIMUSOPS ELENGI 1 MTR. Appropriate Length of softwood props shall be provided as supports for the plants as directed. The trees have to be maintained for a period of 3 months after the entire planting of trees is completed. The Rate shall include necessary labour, supply of materials, safe keep of plants, cost of conveyance, removal of rubbish and surplus earth etc. Complete.MIMUSOPS ELENGI 1 MTR 63 od143768/2024_2025 Planting STAR JASMINE by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the plants transported and unloaded at site. The plants have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of plants, cost of conveyance, removal of rubbish and surplus earth etc. Complete.45cm height 64 od143770/2024_2025 Planting JUNGLE JERANIUM by Digging pit in all kinds of soil and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and planting trees supplied with roots covered with appropriate natural containers from the source of availability including all conveyance, transported without any damage to the root pods, covering the stem with necessary hay etc., caring and protecting the plants transported and unloaded at site till planting in pits of size 120 cm diameter, and 120 cm deep, JUNGLE JERANIUM . Appropriate Length of softwood props shall be provided as supports for the plants as directed. The trees have to be maintained for a period of 3 months after the entire planting of trees is completed. The Rate shall include necessary labour, supply of materials, safe keep of plants, cost of conveyance, removal of rubbish and surplus earth etc. Complete.JUNGLE JERANIUM 65 od143775/2024_2025 Planting JASMINE VINES PLANTS by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete.90cm height 66 od143776/2024_2025 Planting LEMON GRASS SHRUBS by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete.30cm height 67 od143777/2024_2025 Planting GOLDEN SHOWER PLANT by Digging pit in all kinds of soil and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and planting trees supplied with roots covered with appropriate natural containers from the source of availability including all conveyance, transported without any damage to the root pods, covering the stem with necessary hay etc., caring and protecting the plants transported and unloaded at site till planting in pits of size 120 cm diameter, and 120 cm deep, GOLDEN SHOWER TREE 90CM HEIGHT . Appropriate Length of softwood props shall be provided as supports for the plants as directed. The trees have to be maintained for a period of 3 months after the entire planting of trees is completed. The Rate shall include necessary labour, supply of materials, safe keep of plants, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 68 od143778/2024_2025 Planting BERMUDA GRASS by excavating planting bed 30 cm deep at specified area shown in the planting plans and preparing the same with thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying and planting Grass Buffalo grass sod, machine cut at a uniform soil thickness of 15 mm, plus or minus 6 mm, at the time of cutting, measurement for thickness shall exclude top growth and thatch. Individual pieces of Buffalo grass sod shall be cut to the supplier’s standard width and length. Maximum allowable deviation from standard widths and lengths shall be plus or minus 15 mm on width and plus or minus five percent on length. Broken pads and torn or uneven ends will not be acceptable. Standard size sections of Buffalo grass sod shall be strong enough that it can be picked up and handled without damage. Buffalo grass sod shall not be harvested or transplanted when its moisture content (excessively dry or wet) may adversely affect its survival. Before harvesting, the turfgrass shall be mowed uniformly at a height of 25 to 60 mm on winter season grasses and 20 to 40 mm on summer season. Grass turfgrass sod should be transported unloaded at site with care and protection and without any damage. The planted Grass turf grass have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Grass , cost of conveyance, removal of rubbish and surplus earth etc. Complete.BERMUDA GRASSDetails of cost for 10 sqm. 69 od150306/2024_2025 Planting MUNTINGIA by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the plants transported and unloaded at site. The plants have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of plants, cost of conveyance, removal of rubbish and surplus earth etc. Complete.45cm height 70 od150918/2024_2025 Planting BOUENGENVILLA PLANTS by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 71 od226976/2024_2025 d128543/2024_2025 :Planting JUNGLE JERANIUM by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 1 FEET6 INCH JUNGLE JERANIUM 45cm height 72 od226977/2024_2025 d128543/2024_2025 :Planting ARABIAN JASMINE by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials,safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 1 FEET6 INCHARABIAN JASMINE 45cm height 73 od226978/2024_2025 d128543/2024_2025 :Planting GIANT ELEPHANT EAR PLANT by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 1 FEET6 INCHGIANT ELEPHANT EAR PLANT 90cm height 74 od226979/2024_2025 d128543/2024_2025 :Planting CANA LILLY by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3 months after the entire planting is completed. The Rate shall include necessary labour, supply of materials, safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 1 FEET6 INCHCANA LILLY 45cm height 75 od226980/2024_2025 od128543/2024_2025 :Planting UMBRELLA PLANT by excavating planting bed 45 cm deep at specified area shown in the planting plans and refilling the same with a thorough mix of good quality fertile soil, river sand, dried cow dung manure and leaf mould mixed in the ratio of 1:1:1:1, removal of rubbish and surplus earth if any, including lead, lift etc. as directed by the engineer in charge and supplying good healthy cuttings of groundcovers free of all pests and deceases from the source of availability including all conveyance, transported without any damage to the cuttings, covering, caring and protecting the groundcovers transported and unloaded at site. The Groundcovers have to be maintained for a period of 3safe keep of Groundcovers, cost of conveyance, removal of rubbish and surplus earth etc. Complete. 1 FEET6 INCHUMBRELLA PLANT 45cm height 76 PLUMBING WORKS 77 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 78 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes 79 50.18.8.2.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 80 18.49.1 Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore 81 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 82 50.18.9.14.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall 83 18.37.1 Constructing masonry chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand) for water meter complete with C.I double flap surface box 400x200x200 mm ( inside ) with locking arrangement and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grades stone aggregate 20 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 84 50.18.8.7.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 85 50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 86 50.18.9.20.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend 87 od143765/2024_2025 Supply, installation, testing & commissioning of Centrifugal Pressure pump of 20 LPM @ 19/27M 1 HP size 25x25 240 V, with pumps with control panel, with all necessary valves, flexible connections, supports, fixings and fittings electrical/ control panels, power and control cabling , cable trays etc. as specified and as shown on drawings and complying to relevant standards. 88 18.17.1A Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore 89 od143774/2024_2025 Providing and placing a polyethylene water storage tank :ISI 12701 marked,in UG tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ref . OD 18.48 90 od144640/2024_2025 Providing and placing Ferro cement UG soak pit with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per the direction of engineer in charge. 40 flush capacity od 51.19.ST1 91 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 92 od150721/2024_2025 Providing and placing Ferro cement tank, in UG water tank (2000 LTR) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per the direction of engineer in charge od 18.48 93 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 94 17.9.1 Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm 95 od168435/2024_2025 Supply and fixing of CI manhole frame and cover of lockable type ( Double Sealed ) over openings of under ground sump, overhead tank,rain water Sump, soak pits.600X600 Manhole cover with medium duty 96 od168436/2024_2025 Providing and fixing overall semi circular PVC GUTTER of 150 mm dia of with necessary clambs , bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 97 18.18.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore 98 SNACK BAR 99 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 100 60.7.1 DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 101 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 102 5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide 103 5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 104 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 105 5.22A.1 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars 106 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 107 9.18.2 Providing and fixing Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer ( fittings to be paid separately)25 mm thick 108 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 109 9.79.1 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.40 mm 110 9.80 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. 111 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type) 112 9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm 113 9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:Water thinnable cement primer 114 od144572/2024_2025 Providing & fixing Aluminum Galvanised Insulated Sandwich PUF Panels as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required. OD FROM 50.12.2.2 115 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 116 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 117 13.83.1 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.One coat 118 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 119 11.46.2 Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm 120 10.6.3 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover 121 od227165/2024_2025 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. 122 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) 123 Morth items 124 55.22 Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete. 125 Electrical Work-Kiosk 126 od232026/2024_2025 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI/ plastic box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B 127 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire. 128 1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire. 129 90.6.5.13 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 4.00 sq mm 130 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 131 1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 132 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 133 1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 134 90.10.1.2 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface 135 90.10.1.3 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface 136 90.10.1.6 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )8 module moulded plastic box on surface 137 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 138 2.3.2 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door 139 2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 140 2.10.2 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 141 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 142 2.14.1 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 143 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 144 90.16.1.11 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.06 mm GI conductor (8 SWG) 145 od231691/2024_2025 Supply, Installation, Testing and Commissioning of Nickel coated Copper bonded electrode made from low carbon steel. Earth rods and molecularly bonded with 99.9 % pure electrolytic copper with 250 micron coating, 17.2 mm dia with pressed contact including stainless steel nut, bolts and washers.Copper bonded rod of size (17.2mm x 2000mm) with chemical bag with all accessories.The earth rod should be properly covered with UV resistant earth pit Chamber complied to IEC62561-5 including boring of earth pit suitable for the earthing to be done as per the dimension of earth rod. 146 od231693/2024_2025 Supply, installation, testing and commissioning of outdoor type weather proof single phase energy meter box made of CRCA sheet with power coated including fuse upto 25 A rating but excluding energy meter of reputed make 147 od231776/2024_2025 Supply, Installation, Testing & Commissioning of 300 mm sweep Wall mounting oscillating type fan including all accessories of approved make as required for use on 240V AC supply. 148 od231695/2024_2025 Supply, Installation, Testing & Commissioning of 200mm sweep Exhaust Fan with self opening lowers suitable for operation on single phase 230V ,50Hz AC supply complete with all accessories as required complete. 149 od231734/2024_2025 Supply, Installation, Testing & Commissiong of Surface Mounted 12 W Round Led Panel Light of reputed make. 150 Electrical Work-Open Space 151 14.15.1 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal) 152 90.12.9.2 Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 50/38 mm or nearest size 153 90.16.1.4 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 4.00 mm copper conductor ( 8 SWG) 154 90.6.5.11 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm 155 90.12.5.39 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm 156 od231691/2024_2025 Supply, Installation, Testing and Commissioning of Nickel coated Copper bonded electrode made from low carbon steel. Earth rods and molecularly bonded with 99.9 % pure electrolytic copper with 250 micron coating, 17.2 mm dia with pressed contact including stainless steel nut, bolts and washers.Copper bonded rod of size (17.2mm x 2000mm) with chemical bag with all accessories.The earth rod should be properly covered with UV resistant earth pit Chamber complied to IEC62561-5 including boring of earth pit suitable for the earthing to be done as per the dimension of earth rod. 157 od231692/2024_2025 Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed XLPE aluminium conductor cable of 1.1 KV grade as required for input and output of the cable 4 X 6 Sq.mm in flush terminal box of pole. 158 90.12.5.12 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3 core 4 sq mm 159 od232441/2024_2025 Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed XLPE aluminium conductor cable of 1.1KV grade as required for input and output of the cable 3 X 4 Sq.mm in flush terminal box of pole 160 od232668/2024_2025 Supply and Installation of outdoor weather proof IP66 rated Junction Box including associated accessories of approved make 161 od232669/2024_2025 Supply and Installation of 7/7.5 Meter Height Decorative Twin Arm Differential Pole with minimum 500 mm arm length to mount luminaire and with bracket for provision of advertisement board which is fabricated using conical pole made of high tensile mild steel/steel tube with minimum thickness of 3 mm. The pole shall have single section having base dia of minimum 135 mm and top dia of minimum 70 mm. Structurally designed steel base plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. The pole shall be able to withstand wind speed pressure as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. The base section of Pole shall have an in-built junction box to fix connectors and MCB at the bottom. The complete structure shall be hot dip galvanized through seven stage process and minimum average coating shall not be less than 65 microns before treating with primer. After galvanisation structure shall be treated with high quality primer and thereafter coated with Polyurethane paint customized colour as approved by engineer in charge (final coating thickness of average DFT of 100 microns minimum). The complete structure should be hot dip galvanised and marine grade treated for the effective corrosion resistance. 162 od232386/2024_2025 Supply, Installation, Testing & Commissioning of Designer LED bollard light with Decorative Laser Design area or approved design as directed by engineer in charge engraved in the CRCA model. System wattage of 10-20 Watts having maximum output of 2000 lumen, Luminious Efficacy of => 40 lm /W, upto 4 Feet Height, Standard Electronic Driver having Inbuilt Surge Protection of 4KV minimum, LED Chips of approved make, LED Life expectancy shall be greater than 50000 hrs, efficiency of 85% or above, CCT of 3000K – 4500K, CRI of 80 or above, Powder Coated finish, Ingress Protection of IP65 or above. 163 od232630/2024_2025 Supply, Installation, Testing and commissioning of decorative LED street lantern with a suitable wattage with system lumens > 3500 Lumens having LED Chips of CREE/ NICHIA/ OSRAM/ SEOUL/ LUMILEDS make. Overall system efficiency of 115 lm/W at correlated colour temperature (CCT) of 4000- 5000K. The housing material should be spun Aluminium and PMMA/PC protector, CRI 70, LED Life expectancy @L70 > 50000 hrs, IP66 ingress protection, Impact ressitance - IK07, Power Factor>0.95, THD< 10%. System which offers Protection against Short Circuit, Over- Voltage & Over- Current with in-built surge protection up to 4kv and an additional surge protection device of 10kV. LM report should be submitted from NABL accredited lab 164 od232631/2024_2025 Supply, Installation, Testing and commissioning of decorative LED street lantern with a suitable wattage with system lumens > 6900 Lumens having LED Chips of CREE/ NICHIA/ OSRAM/ SEOUL/ LUMILEDS make. Overall system efficiency of 115 lm/W at correlated colour temperature (CCT) of 4000- 5000K. The housing material should be spun Aluminium and PMMA/PC protector, CRI 70, LED Life expectancy @L70 > 50000 hrs, IP66 ingress protection, Impact ressitance - IK07, Power Factor>0.95, THD< 10%. System which offers Protection against Short Circuit, Over- Voltage & Over- Current with in-built surge protection up to 4kv and an additional surge protection device of 10kV. LM report should be submitted from NABL accredited lab.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Kerala View Result →
28.
Public Administrative Department #9293471 Technical Bid
Servicing And Overhauling Work Of Diesel Pump, Vacuum Pump And V.T. Pump Installed In Chachar Nala Permanent Flood Pumping Station And Cleaning Work Of Sump Well And Drain
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
29.
Defence #9226571 AOC
Tender For Repairs To Hardstanding, Footpath And Misc In Domestic Area At Afs Yelahanka; 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 2 M&L for chequered tiles of size 300x300x25 mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match with grey pigment cement and pigments complete all as specified and directed. 3 M&L for 15 mm thick Screed bed or bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed. 4 M&L for sand filling under floors or in foundation including watering and consolidation. 5 M&L for rubber moulded machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment complete all as specified and directed. 6 Demolition of concrete of any description and in any position not otherwise specifically provided for Cement concrete (Un reinforced) all as specified and directed. 7 M&L for Hardcore of gauge of broken boulders not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 8 M&L for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, benching and similar works including weathering slightly rounded on chamfered angle and throating complete all as specified and directed. 9 M&L for 75mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed. 10 M&L for 50mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed. 11 M&L for 100 mm thick plain cement concrete type B-2, 1:2:4 (using 40 mm graded aggregate) as in path, hardstanding, bedcomplete all as specified and directed. 12 Cleaning of blocked / chocked Nahani trap/floor trap/WC/ Wash basin including drain/ sewer/sewage line of any description (SGSW/RCC/CI pipe/SWR Pipe) of75mm/100 mm/ 150 mm/ 200 mm dia and any depth by rodding or by mechanical means and well flushing the complete drain / sewer line upto first manhole to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers where required complete all as specified and directed.Note (i) Contractor or his supervisor /site Engineer will report daily at 0900hrs at complaint cell for collection of complaints from the concerned JE in -charge, in case after checking & attending the complaints, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE than after charge is satisfied with contractors view, no recovery will be made on this account. However complaints related tosewage line blockage/pipe replacement etc whatever is applicable shall be attended on same day whether it is “Sunday or Gazetted Holidays and nothing extra shall be payable to contractor on this account.(ii) Contractor or his supervisor/site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaint register, issue of complaints slip to tradesman and enter after completion in complaints register as instructed by JEs. In case of absence of contractor rep for noting complaints, a penalty of Rs 1000.00 per day will be deducted from the contractor bill.(iii) The complaint shall be attended & defects shall be rectified within 08 hrs i.e. from 0900 hrs to 1700 hrs excluding Sunday or gazetted holiday, commencing from date and time of notifying the complaint slip failing which a Penalty @ Rs. 500/- Per complaint per day (08 hrs) shall be levied upon/ imposed on the contractor and necessary recovery shall be made from his dues on this account.(iv) The above all aspect shall be deemed to be included in this quoted rate of the respective item. 13 Cleaning of manhole to manhole, usinghigh pressure water jettingmachine including cleaning/clearing blockages with all tools andlabours as per the site requirement pipe size 150 mm and over including man holes through chassis mounted diesel run vehicles mounted hydraulic operated high pressure suction cum getting sewer cleaning machine KAMBI-10 LCHB fitted with imported international standard pumps having minimum of3000 litres to 4500 litres suckingcapacity including skilled operator supervising engineer for cleaning/partial desilting of manholes and sewer line as per guide lines laid in IS -11972 (1987) and complete cleaning of site all as directedNote(a) Jetting of sewer line by high pressure jetting system of 2200w PSI/Suction.(b) The complaint has to be rectified within 24 hrs from the complaint assign to the contractor failing which penalty will be imposed @500/- per complaint per day. 14 M&L for de-watering /de-sludging of sewage well and septic tank of any size & approx. 2 to 3 metre depth ,excavation of waste water from collection tank using 4500 litres to 5000 litres vacuum suction tanker, de-watering of liquid or semi liquid waste by water suckinghydraulic pressure machine including cleaning of all sludge silt residue of both organic nature by manual labour or by mechanical scrappers etc in any position & disposal off all the waste outside the defence land, the de-sludging of sewage sump is to be carried out upto the bottom slab of sewage sump/sewage well complete. The sewage well wall & bottom slab to be cleaned by water with high pressure upto entire satisfaction of Engr-in-Charge with necessary safety precaution to be adhere during working. Note(a) Jetting of sewer line by high pressure jetting system of 2200w PSI/Suction.(b) The complaint has to be rectified within 24 hrs from the complaint assign to the contractor failing which penalty will be imposed @500/- per complaint per day. 15 Taking off existing manholes covers & cleaning of manholes depth upto 2 metre by de-watering and taking off the rubbish/sludge etc., removing the same upto 50 m distance and put into newly excavated pits of suitable size and covering with excavated earth and placing back in position of the removed covers complete all as specified and directed. 16 Taking off existing manholes covers & cleaning of grease pit (any type) not exceeding 3 metre depth by de-watering and taking off the rubbish/sludge etc., removing the same upto 50 m distance and put into newly excavated pits of suitable size and covering with excavated earth and placing back in position of the removed covers complete all as specified and directed. 17 Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. 18 M&L for precast cement concrete block masonry with solid blocks, exceeding 10 cm in width and setting in mortar, 1:6 type C1 1:3:6 (using 20 mm graded stone aggregate) complete all as specified and directed. 19 M&L for brickwork with sub class ‘B’ bricks straight or curved on plan exceeding 6 mmean radius built in CM 1:4 complete all as specified and directed 20 M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. 21 Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. 22 M&L for providing factory made precast cement concrete cover slabs (as required sizes) for manholes and plain faces in cement concrete M-30 including necessary reinforcement complete all as specified and directed. 23 Demolition and breaking up drain pipes internal dia of pipe in 150 mm (salt glazed ware, AC or reinforced concrete) set in cement mortar all as specified and directed 24 Demolition and breaking up drain pipes internal dia of pipe in 200 mm (salt glazed ware, AC or reinforced concrete) set in cement mortar all as specified and directed 25 M&L for 150 mm dia reinforced concrete pipes class NP-2 for following dia of pipe laid and jointed with collars complete all as specified and directed. 26 M&L for 200 mm dia reinforced concrete pipes class NP-2 for following dia of pipe laid and jointed with collars complete all as specified and directed. 27 M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) for 150 mm dia pipe concrete bed to drain pipes of including packing under and haunching against the sides of pipeafter they are laid and tested including necessary form work for the following bore of drain complete all as specified and directed. 28 M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) for 200 mm dia pipe concrete bed to drain pipes of including packing under and haunching against the sides of pipe after they are laid and tested including necessary form work for the following bore of drain complete all as specified and directed. 29 M&L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded crushed stone aggregate) as in benching, coping, channel of manholes and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. 30 M&L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed. 31 M&L for double wall corrugated pipe HDPE 150 mm dia in any length with rubber ring joints laid in trenches completed all as specified and directed 32 S&F in repairs of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors/wall complete all as specified and directed. 33 S&F in repairs of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors/wall complete all as specified and directed. 34 S&F in repairs of PVC (SWR) gully trap of size 125/110 mm setting and jointing with solvent cement complete all as specified and directed. 35 S&F in repairs of PVC (SWR) vent cowl 110 mm dia including taking down old unsuitable vent cowl complete all as specified and directed. 36 S&F in repairs of PVC (SWR) vent cowl 75mm dia including taking down old unsuitable vent cowl complete all as specified and directed. 37 S&F in repairs of PVC (SWR) 110mm dia bend any radius complete all as specified and directed. 38 S&F in repairs of PVC 75mmdia (SWR)bends any radius complete all as specified and directed. 39 S&F in repairs of PVC (SWR)110 mm single T complete all as specified and directed. 40 S&F in repairs of PVC(SWR) 75 mm single‘T’ complete all as specified and directed. 41 S&F in repairs of PVC(SWR) 110mm diabranch pieces single (Single Y) equal or unequal complete all as specified and directed. 42 S&F in repairs of PVC (SWR) 75 mm dia branch pieces single (Single Y) equal or unequal complete all as specified and directed. 43 S&F in repairs of 75 mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 44 S&F in repairs of vitreous China squatting pan orrisa pattern white colour of size 580x440 mm with integral foot rests including provision of lime concrete complete all as specified & directed 45 S&F in repairs of stainless steel grating dome 100 mm dia with or without hole complete all as specified and directed. 46 Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exceeding 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. 47 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soft / loosesoil complete all as specified and directed. 48 Removing surplus excavated material (SOIL) to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.
Contract Date: Jan 13, 2026 Contract Value : ₹ 14.49 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Karnataka View Result →
30.
Educational and Research Institute #9013399 Technical Bid
Rate Contract For Supply Of Consumables And Nonconsumables For The Department Of Clinical Immunology , Immunoflorescence, Elisa And Other Kits Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Ana-Hep-20-10 / Liver Monkey ( Igg, Ifa Slide Test ( Pack Size 10 X 10 Per Kit ) , Anca Ifa Slide Test Kit ( Granulocyte, Ethanol / Formaline Fixed ) ( Per Kit -250 Tests ) , Anca-Pr3, Elisa ( Per Kit - 96 Tests ) , Anca -Mpo, Elisa ( Per Kit - 96 Tests ) , Anti-Ds-Dna, Elisa ( Per Kit - 96 Tests ) , Anti-Cardiolipin-Igg, Elisa ( Per Kit - 96 Tests ) , Anti-Cardiolipin- Igm, Elisa ( Per Kit - 96 Tests ) , Anti B2gpi-Igg, Elisa ( Per Kit - 96 Tests ) , Anti B2gpi-Igm, Elisa ( Per Kit - 96 Tests ) , Anti Phosphotidyl Serine / Prothrombin Igg, Elisa ( Per Kit - 96 Tests ) , Anti Phosphotidyl Serine / Prothrombin Igm, Elisa ( Per Kit - 96 Tests ) , Anti Ccp, Elisa ( Per Kit - 96 Tests ) , Anti Carb P ( Per Kit - 96 Tests ) , Anti Gbm, Elisa ( Per Kit - 96 Tests ) , Functionality Test Of Complement Ch50 ( Per Kit - 96 Tests ) , Functionality Test Of Complement Ah50 ( Per Kit - 96 Tests ) , Human Anti-Tissue Transglutaminase ( Ttg ) Antibody Iga Elisa Kit ( Per Kit - 96 Tests ) , Ana Immunoblot - Line Immunoassay ( Containing 17 Antigens ) ( Per Kit-24 Strips ) , Myositis Profile 4- Line Immunoassay ( Containing 16 Antigens ) ( Per Kit-16 Strips ) , Autoimmune Liver Disease - Line Immunoassay ( Containing 14 Antigens ) ( Per Kit-16 Strips ) , Systemic Selerosis Profile ( Nucleoli ) Igg ( Containing 13 Antigens ) ( Per Kit -16 Strips ) , Molecular Biology Gradechemicals And Consumables: Calculate For 2500 Extraction Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Tritonx 100 , 50 Ml , Sucrose, 500 Gm , Mgcl2 , 500Gm , Disodium Edta , 500Gm , Sodium Chloride -500Gm , Chloroform- 500Ml , Tris Free Base - 500Gm , Ethanol ( Mb Grade ) - 500 Ml , Iso Propyl Alcohol ( Mb Grade ) - 500Ml , Trizol Ls - 200Ml , Tris Equilibiriated Phenol Ph 7.8 , Proteinase K - 100Gm , Ammonium Chloride - 500Gm , Ammonium Bicarbonate - 500Gm , Sodium Hydroxide - 500Gm , 10% Sodium Dodecyl Sulphate ( Sds ) - 500Gm , Octanol ( 1 Liter ) , Hydrochloric Acid ( 1 Liter ) , Hydroxy Quinoline -500Gm , Dimethyl Sulphoxide ( Dmso ) - 100Ml , Mgcl2 ( 25 Mm ) - 1Ml , Taq Dna Polymerase With 10 X Buffer Like Invitrogen - 1000U , Dntp’S Set- 100Mm , High Capacity Cdna Synthesis Kit ( 200 Reaction Per Kit ) , Protease Inhibitors - 10Ml , Hla B27 Primers B1: 5-Gct Acg Tgg Acg Aca Cgc T -3 ( 100 ?M ) , Hla B27 Primers B2: 5-Ctc Ggt Cag Tct Gtg Cct T -3 ( 100 ?M ) , Hla B27 Primers B3: 5-Tct Cgg Taa Gtc Tgt Gcc Tt -3 ( 100 ?M ) , Hla B27 Primers C1: 5-Tgc Caa Gtg Gag Cac Cca A -3 ( 100 ?M ) , Hla B27 Primers C2: 5-Gca Tct Tgc Tct Gtg Cag At -3 ( 100 ?M ) , Multiplex Pcr Kit With Q Solution ( 100 Reactions ) , Dnase Rnase Free Water ( 100Ml ) , Real Time Taqman Universal Mastermix ( Compatible For Abi Step One Plus System ) - 5Ml , Gel Red 10Ml , Agarose ( Low Eeo ) 500Gm , Dna Marker ( 100 Bp Ladder ) ( 100 ?G / Ml ) , Dna Marker ( 1 Kb Ladder ) ( 100 ?G / Ml ) , Ssrna Marker ( 28S, 18S ) ( 100 ?G / Ml ) , Rna Loading Dye ( 100 Ml ) , Diamino Benzidine10g , Analytical Grade ( Ar ) Chemicals Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Tris Buffer 500 Gm , Ethanol 500 Ml , Hydrochloric Acid 500 Ml , Beta-Mercapto Ethanol 100 Ml , Glacial Acetic Acid 500 Ml , Boric Acid 500 Gm , Sodium Dodecyl Sulphate ( Sds ) 500 Gm , Sodium Hydroxide Pellets 500 Gm , Potassium Permanganate 500 Gm , Formaldehyde Solution 500 Gm , Disodium Hydrogen Phosphate 500 Gm , Potassium Dihydrogen Phosphate 500 Gm , Sodium Azide 500 Gm , Potassium Chloride 500 Gm , Tissue Culture ( Tc ) Grade Chemicalsand Consumables Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Rpmi 1640 With L-Glutamine And Sodium Bi-Carbonate ( Solution ) ( 1 Liter ) , Penicillin – Streptomycin Solution100ml , Antimycotic Solution 100Ml , Fetal Calf Serum ( Fcs ) 500Ml , Hanks Balanced Salt Solution 1 Liter , Dmem With L Glutamine Without Sodium Bicarbonate 1 Liter , Sodium Bicarbonate 500Gm , Glycerol 500Ml , Bovine Serum Albumin 50Gm , Pbs ( Ph 7.4 ) Calcium And Mg Free 1 Liter , Phyto Haemagglutination ( Pha ) 50Mg , Concavalin A ( Con A ) 250Mg , Lipopolysaccharide ( Lps ) 500 ?G , Di-Sodium Edta ( Tc Grade ) 500Gm , Lymphocyteseparation Medium ( Ficoll ) ( Density 1.077 G / Ml - 500Ml , Trypan Blue Solution ( 0.4% ) 50Ml , Dmso - Tc Grade 100Ml , Formaldehyde Solution 1 Liter , Para Formaldehyde 16% , Pottasium Permanganate Powder 500 Gm , Sodium Citrate 500 Gm , X- Vivo 15 Medium 1 Litre , Human Collagenase Type I ( 50 Mg ) , Recombinant Human Gm-Csf ( 10 Ug ) , Recombinant Human Il-1Beta ( 1 Mg ) , Recombinant Human Il-4 ( 1 Mg ) , Recombinant Human Il-10 ( 25 Ug ) , Recombinant Human Il-2 ( 500 Ug ) , Recombinant Human Il-6 ( 50 Ug ) , Recombinant Human Tgf-Beta ( 10 Ug ) , Recombinant Human Tnf-Alpha ( 100 Ug ) , Citrullinated Vimentin ( 10 Ug ) , Trypsin 0.5% Powder ( 100 Mg ) , Anti Human Cd3 / Cd28 Monoclonal Antibody 100 Ug , Dmem Media, High Glucose, L- Glutamine, Phenol Red 500 Ml , Pbs Sachets ( Without Calcium, Magnesium And Phenol Red ) ( 1X ) ( Pack Size :10 / Pkt ) , Calcium Chloride 500 Gm , Magnesium Chloride 500 Gm , Hbss ( Without Calcium Magnesium / Phenol Red ) ( 1X ) 500 Ml , Hbss ( Without Calcium Magnesium / / Phenol Red ) ( 1X ) 500 Ml , Fbs, Us Origin, 500 Ml , Alkaline Hypochlorite Solution , Ammonium Chloride 500 Gm , Sodium Bicarbonate 500 Gm , Pma 1 Mg , Catalase ( C40 ) 100 Mg , Albumin ( Human Fraction V ) 1 Mg , Edta 500 Gm , Trypsin Edta ( 0.25% ) 100 Ml , Sodium Pyruvate ( 100 Mm ) 100 Ml , Dpbs, No Calcium, No Magnesium 1000 Ml , Mccoys 5A Medium With L-Glutamine Without Sodium Bicarbonate - 1 Liter ( Powder Form ) ( 10 / Pack ) , Cell Culture Flask ( Polystyrene, Angled Neck, Filter Cap, Treated- Cell Attachment ) ( 25 Cm2 ) , Cell Culture Flask ( Polystyrene ) ( Angled Neck, Filter Cap ) ( Treated-Cell Attachment ) ( 75 Cm2 ) , Cell Culture Flask ( Polystyrene ) ( Angled Neck, Filter Cap ) ( Treated For Cell Attachment ) ( 175 Cm2 ) , Cell-Culture Multidishes ( 6 Well ) ( Treated For Cell Attachment ) Polystyrene , Cell-Culture Multidishes ( 12 Wel ) ( Treated For Cell Attachment ) Polystyrene , Cell-Culture Multidishes ( 24 Well ) ( Treated For Cell Attachment ) Polystyrene , Cell-Culture Multidishes ( 96 Well ) ( Treated For Cell Attachment ) Polystyrene , Cell Strainers ( 70 ?M ) Sterile , Cell Strainers ( 100 ?M ) Sterile , Cell Strainer Pestle Sterile , Syringe Filters ( 0.2 ?M Ca Membrane, 28 Mm ) ( Sterile, Ready To Use ) , Syringe Filters ( 0.45 ?M Ca Membrane, 28 Mm ) ( Sterile, Ready To Use ) , Multiwell Cell Culture Plates ( 6 Wells ) ( Per Pack 100 Nos ) , Multiwell Cell Culture Plates ( 12 Wells ) ( Per Pack 100 Nos ) , Multiwell Cell Culture Plates ( 24 Wells ) ( Per Pack 100 Nos ) , Multiwell Cell Culture Plates ( 96 Wells ) ( Per Pack 100 Nos ) , Cell Culture Flasks ( 25 Cm2 ) ( Per Pack 100 Nos ) , Cell Culture Flasks ( 75 Cm2 ) ( Per Pack 100 Nos ) , Autoclavable Membrane Filter Holder ( Stainless Steel- 25 Mm Dia ) ( Per Pack 10 Nos ) , Autoclavable Membrane Filter Holder ( Stainless Steel-47 Mm Dia ) ( Per Pack 10 Nos ) , Autoclavable Suiny / Syringe Filteration Unit ( 25Mm Dia ) ( Per Pack 100 Nos ) , Autoclavable Suiny / Syringe Filteration Unit ( 47Mm Dia ) ( Per Pack 100 Nos ) , 0.22 ?M ( 25Mm ) Disposable Membrane Filter For Culture Medium Filtration ( Per Pack 100 Nos ) , 0.45 ?M ( 25Mm ) Disposable Membrane Filter For Culture Medium Filtration ( Per Pack 100 Nos ) , 0.22 ?M ( 47Mm ) Disposable Membrane Filter For Culture Medium Filtration ( Per Pack 100 Nos ) , 0.45 ?M ( 47Mm ) Disposable Membrane Filter For Culture Medium Filtration ( Per Pack 100 Nos ) , Color Changing Tape To For Adequacy Of Sterilization ( Per Pack 4 Rolls ) , Disposable Graduated Serological Pipettes Sterile ( 1Ml, 2Ml, 5Ml, 10Ml, 25Ml ) ( Per Pack 100 Nos ) , Vaccum Pump Tygon Tubing , Sterile Disposable Filter Units With Sfca Membrane ( 0.2 ?M, 30 Mm ) 150 Ml , Sepmate Tube 50Ml100 / Pack , Sepmate Tube 15Ml 100 / Pack , Vacutainer With Clot Activator, Silicone Coated - 5Ml 100 / Pack , Vacutainer With Sodium Heparin - 4Ml 100 / Pack , Mononuclear Cell Preparation Tubes ( Cpt ) With Sodium Citrate -8Ml ( 60 / Case ) , Mononuclear Cell Preparation Tubes ( Cpt ) With Sodium Heparin -8Ml ( 60 / Case ) , Mononuclear Cell Preparation Tubes ( Cpt ) With Sodium Citrate -4Ml ( 60 / Case ) , Mononuclear Cell Preparation Tubes ( Cpt ) With Sodium Heparin -4Ml ( 60 / Case ) , Hla Typing Kits - Pcr Ssp ( The Item No. 166 - 73 Are Part Of A Single Test And Therefore Required From A Single Manufacturer ) Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Hla Class I ( A ) Typing Kit ( Pcr Ssp ) ( Per Kit-24 Tests ) , Hla Class I ( B ) Typing Kit ( Pcr Ssp ) ( Per Kit-24 Tests ) , Hla Class I ( C ) Typing Kit ( Pcr Ssp ) ( Per Kit-24 Tests ) , Hla Class Ii ( Drb1 ) Typing Kit ( Pcr Ssp ) ( Per Kit-24 Tests ) , Hla Class Ii ( Dqb1 ) Typing Kit ( Pcr Ssp ) ( Per Kit-24 Tests ) , Hla Class I & Ii ( A, B, Dr ) Combitray ( Per Kit-10 Tests ) , Hla Drb1 & Dqb1 Combitray ( Per Kit-48 Tests ) , Hla B51 Typing Kit ( Real Time Pcr ) ( Per Kit-10 Tests ) , Hla Typing Kits - Pcr-Sso ( For Luminex ) Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Hla - A Sso Typing Kit , Hla - B Sso Typing Kit , Hla - C Sso Typing Kit , Hla - Drb1 Sso Typing Kit , Hla - Dqb1 Sso Typing Kit , Hla-A-B-Drb1 Pcr Sso Typing Kit , Hla-A-B-Drb1-Dqb1 Pcr Sso Typing Kit , 96 Well Filter Microplate , 96 Well Unskirted Costar Plates , Sealer For 96 Well Costar Plates , Sape Solution , Sheath Fluid20 Liters Compatible With Luminex 200 , Calibration Kit ( 25 Doses ) Compatible With Luminex 200 , Performance Verification Kit ( 25 Doses ) Compatible With Luminex 200 , 12 Month Pm Kit Compatible With Luminex 200 , Hla Antibody Screening ( Luminex Based ) Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Panel Reactive Antibodieshla Class I , Panel Reactive Antibodieshla Class Ii , Panel Reactive Antibodieshla Class I & Class Ii , Single Antigen Hla Class I , Single Antigen Hla Class Ii , Mixed Class I & Class Ii , Negative Controls , Pe Conjugated Goat Anti-Human Igg , Donor Specific Antibody Screening By Luminex ( Classi & Classii ) , Hla Antibody Screening ( Flow Cytometer Based ) Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Class I Positive Control , Class Ii Positive Control , Negative Control , Hla Class I & Ii Screening Test , Hla Class I Screening Test , Hla Class Ii Screening Test , Wash Buffer ( 10X ) , Reagent Pack , Control Beads , Dsa-Xm , Secondary Antibody For Flow Crossmatch , Percp Conjugated Anti Human-Cd3 , Pe Conjugated Anti Human-Cd19 , Fitc Conjugated Mouse Anti Human-Igg , Pe Conjugated Anti Human-Cd22 , Lymphocyte Isolation / Enrichment Kit , Lymphocyte Isolation / Enrichment Tube , Pbmc Isolation Kit , Pbmc Isolation Tube , Anti Hla Positive Control , Anti Hla Positive Control B Cell , Anti Hla Positive Control T Cell , Anti Hla Negative Control , General Consumbles Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Polypropylene Centrifuge Tube 50Ml Sterile. Dnase, Rnase Free ( Per Box 216 Nos ) , Polypropylene Centrifuge Tube 15Ml Sterile. Dnase, Rnase Free ( Per Box 500 Nos ) , Polypropylene Centrifuge Tube 2Ml Sterile. Dnase, Rnase Free ( Per Box 500 Nos ) , Polypropylene Centrifuge Tube 1.5Ml Sterile. Dnase, Rnase Free ( Per Box 500 Nos ) , Polypropylene Centrifuge Tube 0.5Ml Sterile. Dnase, Rnase Free ( Per Box 1000 Nos ) , Polypropylene Centrifuge Tube 0.2Ml Sterile. Dnase, Rnase Free ( Per Box 1000 Nos ) , Dnase Rnase Free Pcr Strips With Cap 0.2 Ml ( 8 Tube Per Strips ) ( Per Pack 100 Nos ) , Dnase Rnase Free Pcr Tubes With Cap 0.1 Ml - Compatible To Abi Veriti Pcr System ( Per Pack- 1000 Nos ) , Dnase Rnase Free Pcr Strips With Cap 0.1 Ml - Compatible To Abi Veriti Pcr System ( 8 Tube Per Strips ) ( Per Pack - 100 Nos ) , Polypropylene Pipette Tips 0.2 – 10 ?L Sterile. Dnase, Rnase Free ( Per Box 1000 Nos ) , Polypropylene Pipette Tips 20-200 ?L Sterile. Dnase, Rnase Free ( Per Box 1000 Nos ) , Polypropylene Pipette Tips 100-1000 ?L Sterile. Dnase, Rnase Free ( Per Box 500 Nos ) , Polypropylene Pipette Tipsbox0.2 – 10 ?L. ( Per Pack 4 Boxes ) , Polypropylene Pipette Tips Box20-200 ?L. ( Per Pack 4 Boxes ) , Polypropylene Pipette Tipsbox 100-1000 ?L ( Per Pack 4 Boxes ) , Polypropylene Pipette Tipsbox 1-10 Ml ( Per Pack 5 Boxes ) , Micro Centrifuge Tube Storage Box For 0.5Ml ( 81 Places ) ( Per Pack 4 Boxes ) , Cryostorage Box For 15Ml Conical Bottom Polypropylene Screw Cap Tubes ( Per Pack 4 Boxes ) , Micro Centrifuge Tube Storage Box For 2Ml / 1.8 Ml ( 81 Places ) ( Per Pack 4 Boxes ) , Micro Centrifuge Tube Rack For 0.5Ml ( Min 24 Places ) ( Per Pack 4 Nos ) , Micro Centrifuge Tube Rack For 2Ml ( Min 24 Places ) ( Per Pack 4 Nos ) , Storage Rack For 15 Ml For Poly Propylene Tubes , Storage Rack For 5 Ml For Poly Propylene Tubes , Storage Rack For 5 Mlfor Glass Tubes , Sterile Powder Free Nitrile Gloves ( Large ) ( Per Pack 100 Nos ) , Sterile Powder Free Nitrile Gloves ( Medium ) ( Per Pack 100 Nos ) , Sterile Powder Free Nitrile Gloves ( Small ) ( Per Pack 100 Nos ) , Autoclavable Disposable Bags For Sterilization. ( Per Pack 100 Nos ) , Autoclavablepolypropylene Ria Vials 12X75 Mm ( Per Pack 1000 Nos ) , Autoclavable Self Standing Dnase, Rnase, Pyrogen Free Cryogenic Vials ( For Liquid Nitrogen Storage ) - 2Ml ( Per Pack 500 Nos ) , Autoclavable Self Standing Dnase, Rnase, Pyrogen Free Cryogenic Vials ( For Liquid Nitrogen Storage ) - 5Ml ( Per Pack 500 Nos ) , Purified Protein Derivative ( Mantoux ) - Ppd, 5Ml Per Vial , Ph Tablets ( Ph 2-8 ) , Magnetic Stirring Bar With Pivot Ring ( 8 X 30 Mm ) . , Aluminium Foil , 3 Ply Laboratory Tissue Paper Roll ( Dimension 9X11 ) , Kim Wipes -4.5 X 8 Inch , Kim Wipes -15 X 17 Inch , Reservoir Cans With Tap ( 5 Litres ) , Pipette Stand For Eppendorf Micropipettes , Sterile Pasteur Pipettes Disposables , Ethidium Bromide ( 0.5Ug / Ml ) ( 50Ml ) , Countess Ii Automated Cell Counter Compatiblecell Counting Chamber Slides ( Each Slide With Two Counting Chamber- 10?L Samle And 10?L Trypanblue ) ( Per Pack - 50 Nos ) , Pe-Conjugated Streptavidin , Hemocytometer , Uristicks For Glucose Testing ( Per Box -100 Nos ) , Uristicks For Ketone Testing ( Per Box -100 Nos ) , Uristicks For Protein Tests ( Per Box -100 Nos ) , Laboratory Blotting Papers , Laboratory Blotting Papers - Aspiration , Skin Punch Biopsy Needle ( 2Mm / 3Mm ) , Cryotags For 2Ml, 1.5Ml & 0.5Ml Tubes , Rna Storage Solution ( With 10% Dmso ) - 100Ml , Glasswares Note: For All Items Sample Should Be Submitted. Without Sample Quotation Will Be Rejected , Graduated, Autoclavable, Glass Pipettes – 10 Ml , Graduated, Autoclavable, Glass Pipettes – 5 Ml , Graduated, Autoclavable, Glass Pipettes – 2 Ml , Graduated, Autoclavable, Glass Pipettes – 1Ml , Screw Capped Autoclavble Glass Bottles, 500Ml ( Schott Duran / Borosil ) , Screw Capped Autoclavble Glass Bottles, 1000Ml ( Schott Duran / Borosil ) , Screw Capped Autoclavble Glass Bottles, 250Ml ( Schott Duran / Borosil ) , Screw Capped Autoclavble Glass Bottles, 100 Ml ( Schott Duran / Borosil ) , Equipment ( Less Than Rs.100, 000 / - ) • Autoclavable Adjustable Volume Single Channel Research Pipettes 0.1-2.5?L; 0.5-10?L; 2-20?L, 10-100 ?L; 20-200?L, 100-1000?L With Carousel Specification For Pipette • Fully Autoclavable Precision Micropipette • Four Digit Volume Display With Magnifying Space • Quick Lock To Enable Easy Cleaning And Maintenance • Secondary Adjustment To Support For Accurate Pipetting • Spring Loaded Tip Cone • One-Button Operation With Reduced Operating Effort And Active Aerosol Reduction • Precision & Accuracy Above 98% • Lower Operating Forces For Aspiration / Dispensing / Tip Ejection To Limit Strain On The User. Specification For Pipette Carousel • Carries Up To Six Single Or Multi-Channel Pipettes • Includes Rotatable Stand With Design That Holds All Pipettes • Robust Design That Securely Holds And Protects Pipettes • Handle For Easy Transport From Bench To Bench , 1. Adjustable Volume Single Channel Research Pipettes 100-1000?L , 2. Adjustable Volume Single Channel Research Pipettes 20-200?L , 3. Adjustable Volume Single Channel Research Pipettes 0.5-10?L , 4. Adjustable Volume Single Channel Research Pipettes 0.1-2.5?L , 5. Adjustable Volume Single Channel Research Pipettes 2-20?L , 6. Adjustable Volume Single Channel Research Pipettes 10-100?L , 7. Pipette Carousel , Equipment ( Less Than Rs.100, 000 / - ) , Laboratory Centrifuge • Maximun Speed: 15000Rpm • Rotor: Fixed Angle • Maximum Capacity 12 X 1.5Ml Or 12X2mltubes & Compatible Adaptors For 0.5Ml And Pcr Strips • Rotor Should Be Autoclaved At 121°C For 20 Minutes • Minimal Sample Heat Transfer — Maximum Of 12°C After 20 Minutes At Max Speed • Aerosol Tight Rotors • Availability Of Short Spin & Soft Brake Options • Imbalance And Tilt Safety Cut-Off; Safety Interlock Lid To Prevent Opening While Rotor Is Turning • Soft-Touch Lid Closure For Ergonomic Lid Locking — And Releases Automatically At The End Of A Run • Digital Led Display • Noise Level: 49Db; Low-Vibration Operation , Vortex Mixer • Efficient Mixing With Minimal Vibration • Speed Range: 120 To 3200Rpm • Vibration Orbit: 5Mm • Operating Modes: Touch ( Or ) Continuous • Controls: 3-Way Power Switch; Speed Knob: Variable 1–10 Dial Marks • Cup Head For Single Tubes And Platform Suitable For Beakers, Flasks • Can Be Used At 4 To 40 °C ( 85% Relative Humidity, Non Condensing ) , In An Incubator Or Cold Room • Overall Dimensions ( Lxwxh ) : 4.8 X 6.8 X 4.8 In • Electrical ( 50 / 60Hz ) : 120 Volts, 1.2 Amps, 150 Watts • Weight: Around 5 Kg • Vortex Mixer Digital • Efficient Mixing With Minimal Vibration • Speed Range: 120 To 3500Rpm • Vibration Orbit: 3.5 To 5Mm • Microprocessor Controls • 3-Way Power Switch, Led Display For Time / Speed, Up / Down Keys For Set-Point Control • Cup Head For Tubes And Platform Suitable For Beakers, Flasks And Microplates • Operating Modes: Touch ( Or ) Continuous • Electrical ( 50 / 60Hz ) : 120 Volts, 1.2 Amps, 30 Watts , Magnetic Stirrer • Stirring Speed Should Be From 100 Rpm To 1500 Rpm. • Maximum Stirring Volume – 6 Litre. • Plate Temperature Regulation Range - +30 O C To +550O C. • Temperature Uniformity On The Plate - ±3 O C. • Working Plate Heating Time To Reach +300O C – 15 Min. • Maximum Continuous Operation Time – 24 Hour. • Dimension Of Working Plate - 160Cm ×160Cm×10Cm. • Weight – 3Kg • Working Surface Material – Stainless Steel Or Ceramic That Should Be Chemically Resist To Acid And Alkali • Control For Both Hotplate And Stirrer Should Be Provided With Suitable Indicators. • Exact Temperature Setting Via Digital Display ( Led ) , Digital Error Code Display And Elevated Control Panel For Protection Against Leaking Liquids • Automatic Over-Temperature Protection • 230V, 50 / 60Hz • Warranty – 1 Year , Tube Rotator • Variable Speed Tube Rotator With A Small Footprint, Flexible Design, And Simple Display • Accommodates A Variety Of Tubes From 0.5 – 50Ml By Simply Changing The Rotisserie; No Tools Are Required. • Paddles For Different Type Of Tubes ( 10 / 15Ml Paddles; 5Ml / 7Ml Paddles; 1.5Ml / 2Ml Paddles; 50Ml Paddles ) To Be Provided • Mixing Angle Adjusted From 0-90° • 360° Rotation For Thorough Mixing Of All Samples At The Same Time • Rpm: 2-40 • Can Be Used In Incubators And Cold Room Settings • Operating Mode: Continuous / Infinite • Display: Lcd / Led • Ambient Operating Range: 5°C-60°C • Motor Power: 5W • Timing Range: 0-99Min • Power Supply: 220 Volts 50 Hz • Maintenance-Free Motor, Quiet Operation , Digital Dry Bath / Block Heater• Advanced Internal Temperature Sensing Probe For Outstanding Temperature Accuracy And Control • Precise Temperature Control With Pid Circuit • Temperature Calibration Allows The User To Offset The Temperature To Desired Value • Model Should Hold Multiple Heat Blocks At A Time With Interchangeable Aluminum Alloy Heat Blocks For 6X2ml; 6X1.5Ml, 12X0.5Ml And 24X0.2Ml And Pcr Plate Block, 96 Well. • Should Allow For Easy Cleaning And Disinfecting • Powder-Coated Steel Body Construction To Ensure Durability • Built-In Over-Temperature Protection For Sample And User Safety And A Timer • Temperature Range: +5°C To 130°C • Heating Up Time := 25 Min. 30° To 130°C • Temperature Accuracy: = ± 0.5°C • Temperature Uniformity:= ± 1°C • Dimensions ( W X L X H ) , In: 21.1X7.9X3.9; Weight 5Kg • Small Footprint, Lightweight And Ce Certified , Platform / Gel Rocker• High-Capacity Rocker That Is Ideal For Western Blotting And General Mixing Applications. • Microprocessor Control With Adjustable Rocking Speed From 2 To 60 Rpm And Electronic Tilt Angle Adjustment From 0 To 25° • Timer For Up To 2 Hours Or For Continuous Operation. • The Unit Is Safe To Use In Temperature Controlled Environments Up To 70°C • Easy-To-Read, Independent Led Displays For Speed, Tilt Angle And Time • Non-Slip Rubber Pads To Prevent Sample Containers From Moving During Operation • Overload Protection By Activation Of Audible And Visual Signals • Speed Ramping Feature To Slowly Increase Speed To Desired Set-Point • Spill-Resistent Design • Maximum Load Capacity: Upto 5 Kg • Voltage Power: Ac220v, 50 / 60Hz / 6W , 96 Well Horizontal Gel Electrophoresis Unit 1. Cell Size ( Wxlxh ) 21X28x13cm 2. Gel Tray Sizes ( Od ) ( W X L ) 16 X17.5Cm 3.Must Be Suitable For Use In Combination With Two Or More Sample Combs, Ideal For High Throughput Electrophoresis. 4. Small Footprint Area Reduces Uptake Of Bench Space Within Lab.5. Acrylic Buffer Chamber And Safety Cover With 0.012 Inches Diameter Platinum Wired Electrodes. 6. Horizontal Flexi Casters With An Adjustable Barrier To Ensure Efficient Leak Free Casting. An Adjustable Leveling Feet And A Spirit Bubble To Facilitate Even Gel Pouring. 7. Buffer Recirculation Ports To Allow Maintenance Of Uniform Ph And Ionic Strength And Reduce Frequency Of Buffer Changes Necessary During Long Runs. 8. Tight Fitting Acrylic Safety Covers To Reduce Condensation During Electrophoresis. 9. A Coolant System Recirculated Beneath Gel To Provide Constant Temperature Runs. 10. Uv Transparent Gel Trays And Scoops. 11. Leveling Base With Bubble Level 12.The Distance Between The Electrodes Should Be 25Cms , Pocketph Tester With Batteries • Simultaneously Measure Ph And Temperature To Provide Accurate Measurements On The Go • Sensor : Ph- Glass Electrode , Temperature- Thermistor • Ph Measuring Range: -1To 15 Ph; Ph Resolution: 0.1Ph; Ph Accuracy: ±0.1% • 3-Point Calibration To Accurately Measure Ph Across The Acid And Alkali Ranges • Temperature Range: -5 To 60?C; Temperature Accuracy: ±0.6°C; Temperature Resolution: 0.1°C • Simultaneous Display Of Temperature; User Selectable Oc Or Of • Automatictemperaturecorrection / Compensation • Auto Buffer Recognition And Calibration • Battery Life: 250 Hours • Battery Type: 4X 1.5V Micro Alkaline • Display Resolution : Ph – 0.001, Temperature - 0.1?C • Display : 4 Digits, Lcd, Bar Graph Display, 0.8 Seconds / Cycle • Multi Language Operational Instructions • Operating Conditions: 0-45°C, 5 To 85% Humidity In The Absence Of Condensation • Should Provide Colourless Ph Buffer Set, Ph 4.01, 7.00, 10.01 Each Or Ph Buffer Sachet Set, Ph 4.01, 7.00, 10.01 • Should Provide Storage Solution For Ph Sensor, And Solution For Protein Remover And Replacement Sensor Cap • Ce, Fcc Class A Certified , Refrigetrator • Dual Compartments With Independent Compressors. • Automatic Defrost. • Disaster Recovery Safety Control. • Digital Controller Is Provided For Display Of Internal Temperature Along With Alarm Systems. • Capacity – 190 Litre • Temperature Range 0 - 10 O C. • Uniform Cooling By Forced Air Circulation. • Adjustable Plastic Coated Wire Mesh Selves. • Clear Product Visibility With Dual Glass. • High Performance. , Upright Aluminium Freezer Racks • Front Access, Sliding Drawer Type Freezer Rack Made Of Corrosion-Resistant Material With Folded Rails To Reduce Frost • 4X4 Freezer Rack For Storage Of 1 Inch And 2 Inch Standard Size Cryogenic Boxes • Should Fit Most Standard Upright Freezers • Should Be Designed To Reduce Scratching And Enable Easy Removal From The Shelf • Colored Labels For Drawer Sample Identification • Dehumidifier • Portable Digital Dehumidifier With Rolling Casters • Low Temperature Operation Down To 41F • Removes Upto 50 Pints Of Water / Day • Three Fan Speed • Custom Humidity Control • Loss Of Power Protection With Auto Restart • Automatic Defrost • Automatic Shut Off Timer And Full Tank Alert • Options For Continuous Drain Mode • Garden House Connector For Continuous Drainage • Easy-To-Clean Washable Filter • Approximately 11.6 X 15 X 24.4 Inches • Voltage: 115V , Laboratory Coolers • Benchtop Coolers That Hold Standard Tube And Vial Sizes In Various Matrixes And Featuring Labeled Grids For Fast Identification. • Inserts Compatible For0.2 To 2Ml Tubes • Gel Filled / Clear Lid Type • Holding Temperature -20°C For 60 Mins • Made Of Impact-Resistant Polycarbonate With Locking Handle For Long-Term Use • Stackable To Save Space , Automatic Pipette Controller• A Light, Ergonomic, Motorized Pipet Controller Designed For Use With Glass And Plastic Serological Pipets From 0.5 To 100Ml • Autoclavable Pipette Cone • Single Handed Operation With Variable Motor Speed • Separate Aspirate And Dispense Speed Controls For Precise Pipetting • Feature A Heavy-Duty Rechargeable Lithium-Ion Battery • Up To 12 Hours Of Continuous Operation Without Recharge • Direct Exhaust Of Liquid Vapour; With Safety Valve & Dual Hydrophilic, Hydrophobic Filter To Prevent Cross-Contamination. • Replaceable Membrane Filter To Protect Device From Contaminants Being Drawn Into Pipet • Lcd Display For Continuous Visualization Of Speed, Modes, And Battery Status • Can Be Used While It Is Charging , Infusion Pump 1. Capability For Working On Ac Power2. Internal Rechargeable Battery Lasting Over 3 Hours With Full Charge. 3. Capable Of Using50ml Syringe 4. Delivery Rate Should Be From 0.1 Ml / Hr 5. Microprocessor Accuracy Of <+5% 6. Alarms For Occlusion, Near Empty, Low Battery Etc , Pulse Oximeter 1. High Resolution 6.4 Color Tft Display 2. Graded And Color Coded Alarms ( 2 Stages ) 3. Critical Alaram Summary Page 4. 24 Hrs Graphical Trend With Zoom Facility ( Non-Voltive ) 5. Suitable For Adult And Paediatric Applications 6. Optional Thermal Array Recoder 7. Rechargeable Battery Backup 8. Includes: ( Per Set ) 9. Main Unit With Power Cable 10. Spo2 Extension Cable 11. Spo2 Dura Sensor ( Nellcore ) , Digitalph Meter • Perform Easy Measurements And Customizable Four-Meter Channels With Interchangeable Modules • Perform Up To A 6 Point Ph Calibration, Log Up To 2000 Data Point Sets With Time / Date Stamp And Easily Transfer Calibration And Data Logs Via Usb Or Rs232 To A Printer Or Computer • Lcd Display • Temperature Range:-5°C To +105°C; Temperature Accuracy: ±0.1°C; Temperature Resolution 0.1°C • Ph Range: -2 To 20; Ph Accuracy: ±0.002; Ph Resolution: 0.1 • Have Set Point Alarm, High / Low Limit Alarm, Calibration Due Alarm • Numeric Keypads With Menu-Specific Function Keys And Dual Purpose Scroll / Shortcut Keys • Should Come With Ph Electrode Probe, Electrode Stand, 100-240V Universal Power Adapter And Computer Cable • Dimensions ( W X L X H ) , Cm: 28 X 24 X 10; Weight 1Kg • Multi Language Operational Instructions , De-Humidifier Capacity1 90 Ppd Energy Factor1 2.2 L / Kw-H Airflow @ Varying E.S.P. ( External Static Pressure - Dry Coil ) 0.0” W.C.380 Cfm 0.2” W.C.350 Cfm 0.4” W.C.310 Cfm 0.6” W.C.250 Cfm Voltage, Phase, Frequency120v, 1?, 60 Hz Current Draw18.1 A Noise 48 Dba Ducted 54 Dba Unducted Dimensions:Width: 20.75” W / Filter Doors Height: 19.62” Cabinet, 20.62” - 22.62” W / Leveling Feet Length: 24” Cabinet, 29” W / Collars Operating Conditions Inlet Air Operating Conditions Installation 50°F - 105°F, 40° Dew Point Minimum 40°F - 140°F, 0% - 95% Rh ( Non-Condensing ) , Laboratory Timer• Easy Programmable Laboratory Timer • Aaa Alkaline Battery And Chemical-Resistant Abs Plastic Case • Two Or Three - Memory Timer With Digital Display • Accuracy: 0.001% • Resolution: 1 Sec. • Memory Recall • Timer Range: 99 Hours, 59 Minutes, 59 Seconds To 1 Second • Distinct Alarm For Each Channel, 1 Minute, Silenced Automatically Or Manually • Easel Stand, Clip, And Magnetic Back • Dimensions: 2.22L X 6.98W X 5.39Cmh ( 0.875 X 2.75 X 2.125 In. ) • Weight: 1.9 Oz. ( 54G ) . , Power Pack • Output Range ( Programmable ) : 10-300V, Fully Adjustable In 1 V Steps; 4-400Ma, Fully Adjustable In 1 Ma Steps • Type Of Output: Constant Voltage Or Constant Current With Automatic Crossover • 4 Pair Of Jacks In Parallel • Fully Adjustable Timer From 1 Min-99Hr 59 Min • Pause / Resume Function Essential. Automatic Recovery ( After Power Failure ) Eliminates Need To Restart The Unit • Operating Conditions: 0-40°C, 0-95% Humidity In The Absence Of Condensation • Safety Features: No- Load Detection, Sudden Load Change Detection, Overload / Short-Circuit Detection, Over Voltage Protection • Dimensions ( W X L X H ) , Cm / In: 21 X 24.5 X 6.5 / 8.3 X 9.6 X 2.6 • Input Power: 90-120 Or 198-264 Vac, 50 / 60 Hz Auto Switching • 3-Digit Led Display • Weight:1Kg , Digital Water Bath• General Purpose Digitalwater Baths, Designed To Maintain Water Temperature From Ambient To 100°C • Over-Temperature Safety Circuitry • Auto-On And Auto-Off Timers • Audible Alarms Protect Crucial Experiments • Epoxy Powder-Coated Exterior • Stainless Steel Interior • Should Be Provided With Clear Polycarbonate Gable Cover, Diffuser Tray, And Rubber Duck • Monochrome Lcd Display • Heating Capacity 300W • Temperature Range Ambient To100°C • Temperature Stability: ±0.1°C • Temperature Uniformity: ±0.2°C • Smaller Footprint • Ce Certified , Forehead And Ear Digital Infrared Thermometer For Babies And Adults.Technology: It Should Designed Ergonomic And Engineered With Latest Infrared Technology Smart Chips For Optimized Calibration, Probe Sensors Are Highly Accurate In Delivering Instant Readings Within 1 Second .Multi-Mode Measurement: It Should Built With Multiple Temperature Detection Modes, Not Only Supports Ear And Forehead Function, But Also Measures Temperature Of Any Given Object, Liquid Or Room. Suits All Ages: I Should Universally Made To Measure Temperature For Infants & Adults, Apart From Room / Object Temperature, Especially Suits Babies As Reading Can Be Taken Without Disturbing Or Waking Them Safe And Risk Free: Efficient Companion For The Family And Children, The Mute Mode Allows You To Check Temperature Of Toddlers Without Disturbance, Safest Device For Usage As It Is Fda Approved. Indicators: The Thermometer Should Indicates Temperature In Colours ( Green, Orange & Red ) Apart From Displaying The Reading On Lcd Screen With Backlight, Easily Toggle Between °C & °For.Memory: The Device Should Capable To Recall 35 Readings Through Memory Function, So You Can Easily Track Temperature Change When Needed, The Button Is Also Used In Detecting Object / Room Temperature. Service & Warranty: 1 Year Warranty On Manufacturing Defects To Ensure Quality Customer Support , Flammable Safety Cabinets • Material :Mild Steel • Durable & Chemical Resistant, Lead-Free Powder–Coat Paint Finish, Minimizes Effects Of Corrosion & Humidity • Dual Vent With Flame Arrestor • Vent Filtration Box For Removal Of Vapour • Safety Shelves Designed To Safely Direct Incidental Spills To Back & Bottom Of Leak Proof Sump • Door Opening Style: Manual • Numbers Of Adjustable Shelves: 3 • Double-Wall Cabinet Construction With Thickness Of 1.2Mm Steel And 38Mm Air Space. • Continuous Piano Hinge • Provides Smooth Closure • Gross Weight: 145 Kg • Dimension: 17200X1090x460 Mm • Capacity : 45 Gal / 170L , Laboratorymini Centrifuge • Speed: Upto 6000Rpm ; Fixed Speed • Rotor: Fixed Angle • Quick-Release Rotor System And Electronic Brake • Maximum Capacity 6-8 X 1.5Ml & Compatible Adaptors For 2Ml; 0.5Ml And Pcr Strips • Noise Level: 49Db, Low-Vibration Operation • Compact, Rugged Design Withstands Heavy Use In Crowded • Dual Lid Switch For Safe Operation , Pcr Cooler • Easy To Handle, Space Saving And Free Of Contamination • Temperature Of Single Tubes To Be Indicated By The Color Of The Individual Bores • Maintain A Sample Temperature Of 0°C For Over An Hour And Then Change Color When The Temperature Exceeds 7°C • Cooler To Accommodate Individual Tubes, Tubes In A Rack, Tube Strips, Or A 96-Well Plate. , Crash Cart -Overall Size Shall Be More Than 900Mm L X 500Mm W X 1500Mm H. -The Crash Cart Should Be Made Of 25.4Mmx18g Stainless Steel Tubular Frame Work. -Shall Have Epoxy / Anti-Microbial Powder Paint Inside And Out - Should Have Dual Push Handles On Either Side-Should Have S.S. Shelves, Six Colored Removable Bins & Two Polystyrene Lockable Storage Units With Three Drawers Each. -Facility To Carry Ecg Monitors, Defibrillators Etc On Open Areas At Top Centre And Bottom Shelves.-Should Have Stainless Steel Saline Rod Fixed With.-Two Accessory Mounting Brackets To Mount Accessories Anywhere Without The Need Of Pre-Threaded Holes. -Crash Cart Should Be Mounted On 12.5 Cms Dia Non-Rusting Swiveling Castor Wheels. Two Having Locking Arrangement. -Oxygen Cylinder Stand Epoxy Powder Coated, On One Side
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 16
Puducherry View Result →
31.
Public Administrative Department #8994223 Technical Bid
Inviting Item Rate Of Spare Parts Vehicles Of Different Make Model Of Ujjain Muncipal Corporation , Tata Mint / Dicor1st Speed Gear , 2Nd Speed Gear , 3Rd Gear , 4Th Gear , 5Th Gear , Accelerator Pedal , Ace 1Ton Recliner Plastic Cover Assembly , Ace 1Tonplastic Reclinercover , Actuator Motor Mode / Heater , Adaptor Male Brake Pipe , Adjuster Assy. Lh / Rh , Air Filter Element , Air Intake Elbow , Air Mass Sensor Near Airfilter , Allen Head Screw , Alternator 12V , Alternator Belt , Anti Roll Bar Front , Assembly Auxillary Tank With Pressure Cap , Assembly Propeller Shaft , Assembly Tumble Seat Latch , Assly Ecu Mtg Bkt , Assly Front Bumper , Assly Front Pivot Bush ( Lower Link ) , Assly Front Seat Belt Complete Kit , Assly Front Seat Lh-Non Sba-Venture-Gx , Assly Main Silencer With Hanger , Assly Pivot Bush Rear Trailing Arm ( Axle , Assly Trailing Arm With Bush , Assycat Con , Assy Air Filter , Assy Anti Roll Bar Complete ( Front ) , Assy Arb Link , Assy Bracket Arb Mounting Frame , Assy Bracket For Heater Casing Mounting , Assy Bracket -Lh / Rh ( Rack And Pinion Mounting ) , Assy Bracket Stone Gaurd-Air Duct , Assy Bracket ( Cable Clamping ) , Assy Bracket-Parking Brake Cable Rear , Assy Brake Fluid Reservoir , Assy Bump Stopper Rear , Assy Caliper Brake Lh / Rh , Assy Clutch Control Mounting , Assy Co-Driver Seat , Assy Counter Shaft , Assy Cross Member , Assy Cyl Head Cover / Tappet Cover , Assy Cyl.Head With Valves Superace Bs-Iv , Assy Driver Seat , Assy Egr Pipe , Assy Egr Valve , Assy Engine Mount ( Front ) , Assy Engine Mount ( Rear ) , Assy Filler Neck , Assy Front Anti Roll Bar Complete , Assy Front Door Complete Lh / Rh , Assy Front Door Dust Seal , Assy Front Door Matt Complete Lh / Rh - Pain , Assy Front Panel , Assy Front Seat Belt Kit , Assy Front Seat Belt Kit Rh Complete Aut , Assy Front Seat Lh / Rh - Non Sba - High End , Assy Front Seat Toggle Clamp , Assy Front Seat Track Rh , Assy Front Wiper Kit , Assy Fuel Filter , Assy Fuel Pre-Filter , Assy Fuel Rail ( Delphi ) / Common Rail , Assy Fuel Tank , Assy Fuel Tank Complete , Assy Guide Channel Front , Assy Heat Shield , Assy High Pressure Hose , Assy High Pressure Pump ( Delphi ) , Assy Hose Heater Inlet , Assy Hose Heater Outlet , Assy Hose Suction , Assy Injector With Washer , Assy Intercooler , Assy Kit For Venture Eng Cooling Improve , Assy Latch With Links Lh / Rh , Assy Leaf-Screen , Assy Link Lh / Rh Subframe , Assy Lower Link Front Lh / Rh , Assy Manual Window Regulator Lh / Rh , Assy Oil Filter , Assy Oil Pump , Assy Pan Hard Bush , Assy Pan Hard Rod Support Tube , Assy Parking Brake Cable , Assy Parking Brake Cable Rear Rh , Assy Pivot Bush Rear Trailing Arm Fram , Assy Post Silencer With Hooks , Assy Power Steering Pump , Assy Rad. With Fan Motor Shroud , Assy Rear Pivot Bush Lower Link , Assy Rear Spring Parabolic , Assy Rear Spring Parabolic , Assy Release Bearing , Assy Reservoir Mounting Bracket , Assy Return Line , Assy Return Line Middle , Assy Return Line-Complete ( Lhd ) , Assy Return Line-Gear End , Assy Rr Spring Semi Elliptical , Assy Rubber Bushing ( Rear Leaf Spring ) , Assy Shackle ( Rear Spring ) , Assy Shock Absorber ( Rear ) , Assy Spare Wheel Knob , Assy Steering Wheel With Damper , Assy Strut Top ( Front Strut ) , Assy Subframe , Assy Thermostat , Assy Trailing Arm With Bush , Assy Tumble Seat Latch , Assy Turbocharger , Assy Vacuum Hose Engine End , Assy Vent Line ( Canister To Atm. ) , Assy Water Pump , Assy. 9 In Vacuum Booster With Tmc , Assy. 9 Inch Vacuum Booster With Tmc , Assy. Accelerator Pedal Complete , Assy. Air Deflector , Assy. Ball Joint , Assy. Bellow Set , Assy. Bkt. Lspv Mtg. On Frame , Assy. Bracket , Assy. Bracket ( Fuel Line Mtg. Rear ) , Assy. Bracket Air Deflector , Assy. Bracket Arb Mounting Front , Assy. Bracket Engine Mtg. , Assy. Bracket Floor , Assy. Bracket ( Pstg Line ) , Assy. Brake Fluid Reservoir Lhd , Assy. Brake Pedal Lever Complete , Assy. Catalytic Converter , Assy. Clamp Parking Cable Front - Pelica , Assy. Clutch Cable , Assy. Clutch Pedal Lever , Assy. Co-Driver Seat , Assy. Control Mounting Bracket , Assy. Control Mtg.Bracket ( Brakeclutch ) , Assy. Cooler Loop ( Radiator Front ) , Assy. Cooler Loop ( Reservoir End ) , Assy. Cross Member ( Front ) , Assy. Cross Member ( Fuel Tank Mtg. ) , Assy. Damper Mounting Plate - Rh , Assy. Damper Plate - Lh , Assy. Dust Cover Tube-Front Strut , Assy. Filler Neck , Assy. First Leaf With Bush , Assy. Front Arb With Ring , Assy. Front Axle Lh / Rh , Assy. Front Brake Hose , Assy. Front Parking Brake Cable , Assy. Fuel Lines ( For Na Engine ) , Assy. Fuel Tank , Assy. Fuel Tank Complete , Assy. Fuel Tank Welded. , Assy. Guide Plate Lh / Rh ( Rear Spring ) , Assy. High Pressure Line Lhd , Assy. Housing Set , Assy. Hp Hose , Assy. Inlet Pipe With Flexible Bellow , Assy. L.S.P.V. , Assy. Outlet Pipe ( Presilencer ) , Assy. Panhard Rod With Bush , Assy. Parking Brake Cable Front , Assy. Parking Brake Lever , Assy. Parking Cable Front , Assy. Pinion Set , Assy. Pipe , Assy. Pipe All Type , Assy. Power Steering Pump , Assy. Power Steering Reservoir , Assy. Pre Silencer , Assy. Propeller Shaft-Super Ace , Assy. Pull Rod , Assy. Rack And Pinion Rhd-Power Assisted , Assy. Radiator Bracket And Guard , Assy. Rear Antiroll Bar Complete , Assy. Rear Brake Hose , Assy. Rear Brake Lh 17.46 W / C , Assy. Rear Brake Lh Dia 254 , Assy. Rear Brake Rh 17.46 W / C , Assy. Rear Brake Rh Dia 254 , Assy. Rear Shock Absorber , Assy. Rear Spring Hanger Bracket - Rear , Assy. Return Line , Assy. Return Line ( Gear End ) , Assy. Return Line ( Reservoir End ) , Assy. Rubber Bellow , Assy. Rubber Grommet , Assy. Silencer , Assy. Spare Wheel Carrier , Assy. Steering Column , Assy. Steering Column ( Bs-Iv ) , Assy. Steering Gear Lhd ( Power ) , Assy. Steering Wheel ( 3 Spoke ) , Assy. Stg. Column Mtg. Bracket , Assy. Subframe Complete With Stone Guard , Assy. Suction Line ( Filter To Fip ) , Assy. Suction Line ( Filter To Tank ) , Assy. Tailpipe , Assy. Top Cup ( Strut Top ) , Assy. Tube ( Spare Wheel Mtg. ) , Assy. Tube From Lh T Connector To Lcrv , Assy. Tube From Primary Adapter To Lcrv , Assy. Twin L.C.R.V. , Assy. Vaccum Pipe I ( Nylon ) , Assy. Vaccum Pipe Ii ( Nylon ) , Assy. Vacuum Hose Pump End ( 1.4Ltr Rhd ) , Assy. Vacuum Pipe Pump End , Assy. Vapour Line ( Pump To Tpv ) , Back Plate Assy. Lh / Rh , Baffle , Ball Bearing , Beading , Beading For Pan , Bearing Block , Bellow Kit , Bolt , Booster Assembly , Booster Tmc Minor Kit , Bottom Bush , Bottom Cover With Brass Contact Ring , Bracket ( Acc. Cable Mtg ) , Bracket ( Fuel Heater Mtg. ) , Bracket ( Fuel Lines Support ) , Bracket ( Radiator Mounting ) , Bracket ( Spare Wheel Mtg. ) , Bracket Alternator , Bracket Rear Brake Hose Mtg. On Axle , Bracket Starter Motor , Brake Disc Dust Cover-Lh / Rh , Bump Stopper Front , Cable For Rear Leg Folding , Cable Seat Cam Actuator , Cable Seat Cam Actuator ( 7+D ) Layout , Caliper Assy.Lh / Rh , Camshaft ( Exhaust ) , Camshaft ( Intake ) , Camshaft Gear Rear , Carpet Skirt Lh / Rh , Cartridge Assembly Kit , Centre Bolt ( Rear Leaf Spring ) , Circlip Removal Tool / G65 / Pelican , Clamp ( Frt Arb Bottom Mtg ) , Clamp ( Pstg Hose ) , Clamp ( Rear Leaf Spring ) , Clamp For 2 Brake Lines , Clamp For Brake And Fuel Line , Clamping Bolt ( Stone Gaurd-Air Duct ) , Closing Plate - Parking Front Brake Cabl , Clutch Hose , Clutch Pedal , Clutch Plate , Clutch Release Lever , Coil Spring ( M / S Tc Springs ) , Column Assembly Collapsible -Mechanical , Connecting Rod , Connecting Rod Bearing , Connecting Rod Bush , Counter Bearing , Cover Sheet , Crank Sensor , Crankshaft Bearing , Crankshaft Gear , Crankshaft Key , Crankshaft With Pin W / O Bearing , Cup ( Front Arb ) , Cup Washer , Cyl Head Gasket , Diesel Filter Body , Diesel Filter Element , Diesel Tank Fuel Pump Assembly , Dis Microbus , Dis_Temp_Sensor , Double Ended Stud M6 , Dowel Pin , Drg. Assy. Suction Line ( Fuel Heater T , Drift / Circlip Fitment / Gb65 / Pelican , Drift / R-4D Dowel / 28180402 / G65 / Pel , Drift / R-4D Dowel / 28180402 / G65 / Peli , Drift / R-5D Dowel / 28180402 / G65 / Peli , Drive Shaft - Tcic , Drive Shaft Bearing , Dual Temperature Trtansducer , Dust Cover With Cup Assy , Dust Seal Cap , Ecu , Engaging Gear ( 1 / 2 ) , Engaging Gear 3 / 4 , Engine Cover Front , Engine Cover Rear-Hardpad Version-Pelica , Exhaust Cyl Head Valve , Exhaust Manifold , Feed Pipe Assy Long , Feed Pipe Asy Short , Feed Tube Assy. Left / Right , Fifth Leaf , Fifth Speed Gear - Tcic , First Leaf , Flange Bolt , Flange Yoke , Flywheel , Flywheel Bearing , Flywheel Ring , Folding Mechanism Plastic Cover Lh / Rh , Fourth Leaf , Front Brake Disc , Front Cabin Seat Belts W / O Switch Comple , Front Coil Spring ( 20Kgf / Mm ) , Front Door Primary Seal Lh / Rh , Front Door Waist Seal Outer Lh / Rh , Front Engine - Pvc Cover , Front Hub , Front Panel Outer , Front Pipe Assy Silencer , Front Shockup , Front Spring Seat Top , Fuel Hose , Fuel Tank Cap With Lock For Ace 1Ton Pic , Fueltank Strap And Rubber , Funnel - Brake Fluid Reservoir , Garnish - Front Panel , Gasket ( Intake Manifold ) , Gasket Manifold , Gear Cable , Glow Plug / Heater Plug , Glow Plug Strip / Heater Plug , Grommet Power Steering Hose , Guard ( Propeller Shaft ) , Handbrake Lever Lh / Rh , Hardened Washer - Strut Top. , Hardpad Clip , Heat Shield - Engine Cover Front , Heat Shield - Engine Cover Rear , Heat Shield - Oil Filling Cap , Heat Shield ( Load Body ) , Hex Fl Scr M6x12 , Hex Thin Nut - M10x1 , Hex.Bolt - Cylinder Head , Hexagon Flange Bolt M12x1.25X160 , High Pressure Hose , High Pressure Line , High Pressure Line ( Pump To Rail ) , High Temperature Warning Unit , Hla , Horn Pad , Hose ( Fuel Filler Neck ) , Hose Blow-By / Hose Pipe Oil Seprator , Hose Brake Fluid , Hose Brake Fluid Primary , Hose Brake Fluid Secondry , Hose Pipe Outlet , Hose Reservoir Primary , Hose Reservoir Secondry , Hose Pipe Inlet , Hose ( Oil Adapter To Oil Sump ) , Housing Assy. Kit , I Shaft Assembly Middle , Ibj Assy ( M / S Rane-59602404 ) , Ibj Assy. , Ibj Nut , Idler , Injector Claw / Lock , Inlate Cyl Head Valve , Inner Ball Joint Assy. Kit , Insert Moulded Plastic Cap , Insulation Engine Cover Front , Insulation Engine Cover Rear , Insulation Oil Filling Cap , Insulation Panel Engine Shield - Lhd , Intake Manifold , Intercooler Duct , Kit Adaptor , Kit Assy Front Door Outer Handle Lh / Rh , Kit Assy Lock Kit Set , Kit Assy Lock Set , Kit Minor Washer , Kit Minor Wheel Cyl. , Kit Nrv , Kit_Reverse_Guiding_System , Kit-Bleed Screw , Kit-Bleed Screw Per W / Cyl Assy , Kit-Bracketrubber Mount , Kit-Carrier Assy , Kit-Feed Tube Assy , Kit-Lever Pawl Lh Per Brake Assy-Lh / Rh , Kit-Lined Shoe Per Vehicle , Kit-Pad Assy With Shim , Kit-Screw Per Brake Assy , Kit-Shoe Hold Down Per Brake Assy , Kit-Springs Per Brake Assy , Kit-Wheel Cyl. ( Minor ) Per W / Cyl. Assy , Knob M8 , Leaf-Screen Trim , Link , Link - Inner Handle Lh / Rh , Link - Locking Knob Lh / Rh , Link - Solenoide Lh / Rh , Link Antiroll Bar , Link-Outer Handle , Lockable Fuel Filler Cap One Way , Lower I Shaft Assy , Lower Link Front Lh / Rh , Lower Shaft , Lower Shaft Assy , M8 Triple Start Knob , Main Shaft , Matt For Engine Cover Front , Mc Assy , Mc Kit Major , Mint 10 No. Nut , Mint 12 No. Bolt With Nut 3 , Mint 13 No. Nut , Mint 2.5 Clip , Mint 30205 Wheel Bearing , Mint 48548 Wheel Bearing , Mint Aade Nut Bolt , Mint Air Cleaner Hose Pipe , Mint Alternator Bolt With Nut , Mint Altinator Belt 5Pk0732 , Mint Arm Bolt , Mint Arm Me Bush Fitting , Mint Arm Thhiya Rear , Mint Balance Rod Balkin , Mint Balance Rod Bush Kit , Mint Balance Rod Patti , Mint Balance Rod Pin , Mint Balance Rod Rubber Bush , Mint Balance Rod Thhiya With Nut , Mint Balance Rod Woisher , Mint Barme 2, 2.5, 3.4 Soot 3 Long , Mint Block Lath Work , Mint Block Repairing , Mint Block Se Tute Bolt Nikalana , Mint Bolt 12 No. 2.5 , Mint Bolt 14 No. 1.5 , Mint Bolt 14 No. 3 , Mint Brake Caliper Bolt With Woisher , Mint Brake Disc , Mint Brake Master Cylinder , Mint Brake Pad , Mint Brake Pipe 10 No. Nut 1Ft Long , Mint Brake Pipe 10 No. Nut 6Ft Long , Mint Cam Bolt , Mint Cam Shaft Bolt , Mint Clutch Fark Lever , Mint Clutch Work Labour , Mint Commonrail Servicing , Mint Coolant Pipe Repairing , Mint Coolent Bottle , Mint Coolent Box , Mint Coolent Hosepipe , Mint Coolent Mainifold Pipe , Mint Coolent Plate , Mint Crank Bolt , Mint Crank Key , Mint Crank Oil Seal ( Front ) , Mint Crank Oil Seal ( Rear ) , Mint Crank Repairing , Mint Crank Servicing , Mint Crown Pinion , Mint Crown Pinion Repairing , Mint Crown Side Bearing , Mint Cylinder Pipe Complete , Mint Damru Pipe , Mint Diesel Fluide Pipe , Mint Diesel Main Pipe ( Baloon Type ) , Mint Diesel Overflow Pipe , Mint Diesel Return Tee , Mint Diffrential Handi , Mint Dog Kit , Mint Door Glass Handle , Mint Door Lock Screw , Mint Dowel , Mint Elbow Hose Pipe Complete , Mint Engine Block , Mint Engine Oil , Mint Engine Oil Chamber , Mint Engine Packing , Mint Fark Bush , Mint Fark Lever , Mint Fip Pump Repairing , Mint Flywheel Bolt , Mint Flywheel Cut Polish , Mint Front Glass Rubber Channel , Mint Front Hub Woisher , Mint Front Main Glass Fitting , Mint Front Shockup Spring , Mint Front Wheel Checknut , Mint Front Wheel Hub Oil Seal , Mint Full Engine Over Oiling , Mint Full Engine Servicing , Mint Gear 3Rd Hub , Mint Gear 3Rd Top Slu , Mint Gear Box Repairing , Mint Gear Box Servicing , Mint Gear Cable Lock , Mint Gear Chilam , Mint Gear Handi , Mint Gear Hosing , Mint Gear Hozing Welding , Mint Gear Lever Bush Kit , Mint Gear Main Oil Seal , Mint Gear Oil Seal , Mint Gear Poilet Bearing , Mint Gear Tapa , Mint Gear Tapa Kit , Mint Gear Tapa Repairing , Mint Half Yoke , Mint Half Yoke Opening Fitting , Mint Head Cam Cap , Mint Head Me Stat Ke Thread Banana , Mint Head Repairing , Mint Head Se Tute Bolt Nikalana , Mint Head Seat , Mint Head Servicing , Mint Head Stud 13 No. , Mint Hla Fitting , Mint Hose Pipe Assy. , Mint Hosepipe , Mint Hub Bearing Cone , Mint Hub Spacer , Mint Hub Thrust Woisher , Mint Hydraulic Jack ( Jack Well ) , Mint Hydraulic Motor Bearing , Mint Hydraulic Motor Repairing , Mint Hydraulic Pipe , Mint Injector Nozzel Coupler , Mint Injector Nozzel Servicing , Mint Injector Pump Repairing , Mint Intercooler Hose Pipe Repairing , Mint Intercooler Transmission Pipe , Mint Jack Pin , Mint Jack Seal Kit , Mint Jack Seal Polish , Mint Jack Tee , Mint Jack Tube Polish , Mint Kamani Bush , Mint Kamani Center Bolt 3 , Mint Kamani Center Bolt 4 , Mint Kamani Patta 34 , Mint Kamani Patta 39 , Mint Liner Slu , Mint Linking Rod , Mint Main Bearing , Mint Main Bearing Std , Mint Milometer Sensor , Mint Nozzle Bolt 12 No. , Mint Nozzle Lock Unlocking , Mint Nozzle Return Pipe , Mint Nozzle Valve , Mint Nut Bolt 12 No. 4 , Mint Oil Chamber Bolt , Mint Oil Chamber Packing , Mint Oil Cooler Ring , Mint Oil Diston , Mint Oil Guage Pipe , Mint Oil Jet Bolt , Mint Oil Jet Removing From Block , Mint Oil Pump Jaali , Mint Oil Pump Oil Seal , Mint Oil Seal Kit , Mint Packing Kit , Mint Pinion Bearing Big , Mint Pinion Bearing Small , Mint Pinion Oil Seal , Mint Piston Puller , Mint Piston Ring , Mint Popular Shaft Through Work , Mint Popular Shaft Uj Cross Fitting , Mint Power Steering Oil , Mint Power Steering Pipe , Mint Power Steering Pipe Repairing , Mint Pressure Plate Bolt , Mint Quil Pad , Mint Radiator Fan Assy. , Mint Radiator Foundation , Mint Rear Kamani Bush , Mint Rear Wheel Bolt , Mint Rejmal Patti ( Cloth ) , Mint Shockup Alter Bolt 17 No. , Mint Shockup Bolt , Mint Shockup Bolt Without Alter 17 No. , Mint Silencer Pipe With Jaali , Mint Slu , Mint Spendal ( Rhs ) Complete , Mint Steering Arm Bush , Mint Steering Arm Bush Fitting , Mint Steering Arm Bush Kit , Mint Steering Coupling , Mint Steering Cross Assy. , Mint Steering Cross Rod , Mint Steering Oil Pipe , Mint Steering Rack Repairing , Mint Steering Rod , Mint Suspenion Bracket With Nut , Mint Suspension Arm Bolt , Mint Suspension Arm Bush Kit , Mint Suspension Arm Bush Kit Fitting , Mint Suspension Arm Bush Woisher , Mint Suspension Arm Spring , Mint Suspension Linkages Bush , Mint Suspension Thhiya Rear , Mint Tapit Cover Packing , Mint Thermostate Valve , Mint Timing Cover , Mint Timing Oil Seal , Mint Tube 165 / D-14 , Mint Tube Valve , Mint Turbo Oil Pipe , Mint Turbo Packing , Mint Turbo Pipe , Mint Turbo Repairing , Mint Turbo Servicing , Mint Vaccume Pressure Pipe , Mint Vaccume Pump Plate , Mint Valve Joint Fitting , Mint Vehicle Scanning , Mint Water Coolent Pipe , Mint Water Jacket Pipe , Mint Wheel Bearing ( Big ) , Mint Wheel Bearing ( Small ) , Mint Wheel Bearing Fitting , Mint Wheel Jack , Mint Wiper Blade , Mounting Bracket , Mounting Bush , Mounting Clamp , Mounting Rubber , Needle Roller Bearing ( 1St Speed Gear ) , Needle Roller Bearing ( 2Nd / 3Rd Gear ) , Nozzle Piston Cooling , Nut-Pulley , O_ Ring All Size And Type , Obj Assy ( M / S Rane-59552407 ) , Obj Assy. With Nut , Offer Drg Assy Nylon Fuel Lines For Tc , Offer Drg. Assy. Rear Brake Hose , Offer Drg. Clamp For Brake Line , Offer Drg.Assy.Lspv , Offer Drg.Assy.Suction Line ( Tank To Wat , Oil Filling Cap / Tappet Cover Cap Plastic , Oil Pressure Switch , Oil Seal , Oil Seal ( Camshaft ) , Oil Separator , Omega Clip , Outer Ball Joint Assy. Kit , Outer Rear View Mirror Lh / Rh , Packing Foam ( Control Mtg. Bracket ) , Pad ( Spare Wheel Support ) , Pan Assy Rh , Panel Inner Front Door Lh / Rh ( Plastic Membrane ) , Panel Roof - Mb , Pin Front Cable , Piston Set , Pivot Pin , Pivot Pin / Brake Pin , Plenum Seal , Poly Vee Belt / Power Stg Belt , Power Steering Gear Assembly , Power Steering Pump , Power Steering Rack And Pinion Assembly , Pressure Plate , Pressure Port Connector , Prop. Shaft Assy , Propeller Shaft For Ace 1 Ton 2380 Wb , Pulley-Drive , Rack , Rear Brake Drum-254 Dia , Rear Coil Spring , Rear Pivot Pin Link Mtg , Rear Shockup , Rear Spring Pad , Recliner Cover Assy Rh , Regulating Glass Front Door Lh / Rh , Release Lever Assembly , Reservoir - Assy Power Steering , Reservoir Bracket , Retaining Ring ( Int ) , Retaining Washer , Retro Kit For C Clip And Sleeve , Rev. Gear / Shifter Sleeve , Reverse Idler Gear , Rocker , Rubber Bellow , Rubber Grommet For Leaf Trim Wiper , Rubber Hose All Type And Size , Rubber Joint Assy , Rubber Packing , Rubber Packing ( Fuel Tank Mtg Bkt ) , Rubber Seal For Wiper Mounting Lh / Rh , Seal Kit , Seal Oil Filling Cut Out , Seal Race ( Stub Axle ) , Seat Pan Insulation Rh-Lhd , Seat Skirt Rh , Second Leaf , Self Starter , Servo Assy , Shaft , Sheet Metal C Clip , Shifter Sleeve 3 / 4 , Short Gear Assy. Kit , Slip Yoke Assy. , Spacer , Spacer - Strut Top. , Spacer ( 1St Gear ) , Spacer ( Rear Pivot Mtg. ) , Spacer Panhardrod Axle End , Spacer Tube , Special Screw M6x20 , Split Pin , Spring , Spring ( For Accelerator Rod ) , Spring Seat Top ( Rear ) , Spring Seat Top ( Rear ) ( One Lug ) ( 33 Mm ) , Spring Seat Top ( Rear ) ( Two Lugs ) ( 37 Mm , Spring-Shoe Return ( Lower ) , Spring-Shoe Return ( Upper ) , Spring-Strut Return-Lhrh , Starter Motor 1.4Kw , Steering Column , Steering Gear Tierod Assy , Steering Gear W / O Tie Rod , Stone Gaurd ( Air Duct And Inter Cooler ) , Stone Guard ( Engine ) , Stopper , Strip Mudflap 1 Ton , Strutquadrant , Stub Axle Lh / Rh , Sub Assy.Strut Top , Suction Hose , Suction Port Connector , Synchrocone ( 3Rd / 4Th & 5Th Speed , Synchrocone 1 / 2 Speed , Tandem Master Cylinder Assy. , Taper Roller Bearing ( Inner ) , Taper Roller Bearing ( Outer , Tapper Roller Bearing , Temperature Sensor , Tension Pulley , Tensioner , Thermal Insulation Lh / Rh , Thermistor Evaporator , Thermo Amplifier , Third Leaf , Third Row Plastic Cover Ib Lh / Rh , Third Speed Gear , Thrust Woisher , Timing Belt , Timing Gear ( Fip ) , Timing Gear-Camshaft , Torsional Vibration Damper , Turn Bukle Nut , U Clamp , Uj Cross , Uj Kit , Upper Bush , Upper Column Assembly , Vacuum Modulator , Vacuum Pump Gasket , Vacuum Pump / , Valve Guide Intake-Exhaust , Valve Guide Oil Seal , Valve Spring , Vibration Damper , Vibration Damper ( Rear Axle ) , Washer , Washer - Cylinder Head Bolt , Washer All Type , Wheel Cylinder Assy Lh / Rh , Wheel Rim Assy , Windshield Glass Clear , Wiper Arm And Blade ( Co-Driver ) - Microbu , Wiper Arm And Blade ( Driver ) - Microbus ) , Tata Ace Mega 1St Speed Gear , 2Nd Speed Gear , 3 Rd Speed Gear , 4Th Speed Gear , Accelerator Pedal Module , Adapter;Hp Pump , Air Filter Element , Alternator Assy. 12 V , Alternator Cutont , Alternator Rottor , Assly Engine Mount ( Rear ) , Assy 7 Booster With Dia.22.22 Tandem Master Cylinder , Assy Air Filter , Assy Catcon , Assy Clutch Cable , Assy Counter Shaft , Assy Egr Cooler , Assy Fuel Control Unit , Assy Fuel Filter , Assy Fuel Tank , Assy Idoler , Assy Intercooler , Assy Oil Filter , Assy Oil Pump , Assy Oil Separator , Assy Speedo Gear ( 13 / 3 ) Plastic Ver. , Assy Tank Unit , Assy Tensioner , Assy Tubrochager , Aux.Water Tank , Balancer Shaft Assy , Brake Disc , Brake Liner Set , Brake Pad Set , Bush ( 1St Gear ) , Cam Sensor , Camshaft , Carrier ( 1 / 2 Speed ) , Carrier ( 3 / 4 / 5 Speed ) , Clutch Plate , Common Rail , Conn Rod Bearing , Connecting Rod , Coolant Temperature Sensor , Counter Bearing , Crank Sensor , Crankshaft Assy , Crankshaft Bearing , Cyl Crankcase Assy / Block , Cyl Head Cover , Cyl Head Gasket , Cylinder Head Assy With Valves , Cylinder Head Assy Without Valves , Diesel Filter Body , Diesel Filter Element , Diesel Tank Fuel Pump Assembly , Drive Shaft , Drive Shaft Bearing , Duct;Intercooler , Ecu , Engaging Gear ( 1 / 2 ) , Engaging Gear 3 / 4 , Engaging Gear 5Th Speed , Fifth Speed Gear , Front Hubm , Front Shockup , Fuel Filter Assy ;Main Filter , Fuel Return Pipe Assy , Fuel Suction Pipe Assy , Gasket Oil Pump , Gasket; Water Pump , Gasket;Cyl Head Cover , Gear - Crankshaft , Gear Cable , Gear, 2Nd Speed , Hp Pump Assy , Injector Assy , Main Shaft , Mega 10No Tapit Cover Stat , Mega 2.5 Center Bolt , Mega 30205 Wheel Bearing , Mega 48548 Wheel Bearing , Mega 5Pk 730 Belt , Mega 5Pk 767 Belt , Mega 5Pk 835 Belt , Mega Accelarator Paddle Coupler , Mega Accelerator Paddle ( Xl ) , Mega Air Cleaner Hose Pipe , Mega Air Pipe ( Tapid Cover ) , Mega Alternator Nut Bolt , Mega Axel Bearing , Mega Axel Repairing , Mega Axel Slu , Mega Axle Bearing , Mega Axle Bearing Openning Fitting , Mega Axle Seal , Mega Axle Stud , Mega Balancer , Mega Block Lathe Work , Mega Block Me Slu Lagakar Thread Banana , Mega Block Repairing , Mega Bolt Thread Making In Block , Mega Brake Caliper , Mega Brake Cliper , Mega Brake Lsp Valve , Mega Brake Master Cylinder Kit , Mega Brake Pipe , Mega Brkae Pipe ( Master Cylinder ) , Mega Bypass Pipe , Mega Cabin Front Glass , Mega Cabin Front Glass Fitting , Mega Cage Body Repairing , Mega Cage Body Servicing , Mega Cam Bolt , Mega Cam Setting , Mega Center Bolt 3 Soot 4 , Mega Chamber Bolt , Mega Clutch Fark , Mega Clutch Fark Lever , Mega Clutch Paddle , Mega Clutch Paddle Pin , Mega Common Rail Fuel Pipe , Mega Common Rail Service , Mega Commonrail Sensor , Mega Coolent Hose Pipe , Mega Coolent Plate , Mega Cr Bush , Mega Crank Key , Mega Crank Oil Seal Rear , Mega Crank Polish Rejmark Patti , Mega Crank Repairing , Mega Crank Sensor Coupler ( Xl ) , Mega Crdi Pipe , Mega Crown Pinion , Mega Crown Pinion Bearing , Mega Crown Pinion Bearing Fitting , Mega Crown Pinion Me Se Tute Hue Bolt Nikalana , Mega Crown Pinion Opening Fitting , Mega Crown Pinion Repairing , Mega Diesel Filter , Mega Diesel Filter Assy. , Mega Diesel Mainpipe Iron , Mega Diesel Motor Coupler , Mega Diesel Pipe , Mega Diesel Tank Pipe ( Inner ) , Mega Diesel Tank Pipe ( Outer ) , Mega Door Glass ( Lhs ) , Mega Door Glass Handle , Mega Door Glass Machine ( Lhs ) , Mega Door Lock , Mega Door Lock Screw , Mega Door Outer Handle ( Lhs ) , Mega Egr Pipe , Mega Egr Valve , Mega Engine Opening Fitting , Mega Fan Assy. , Mega Fark Bush , Mega Fip , Mega Fip Pump High Pressure Valve , Mega Fip Pump Thhiya , Mega Fip Service , Mega Flywheel Bearing , Mega Flywheel Ring , Mega Front Front Hub Oil Seal , Mega Front Kamani 30.5 Patta Clip Wala , Mega Front Kamani Bush , Mega Front Kamani Jhula ( Lhs ) , Mega Front Kamani Mada Patta , Mega Front Kamani Main Patta 41 , Mega Front Kamani Patta 22 6Th , Mega Front Show Jaali , Mega Front Show Panel , Mega Fuel Pump Slu ( Rotter ) , Mega Full Engine Servicing , Mega Gear Box Repairing , Mega Gear Cable Catcher , Mega Gear Cable Lock , Mega Gear Chilam , Mega Gear Handi , Mega Gear Hosing , Mega Gear Hosing Servicing ( Xl ) , Mega Gear Lever Bush Kit , Mega Gear Main Shaft Bearing , Mega Gear Mechanism , Mega Gear Mounting , Mega Gear Servicing , Mega Gear Tapa , Mega Gear Tapa Kit , Mega Gear Tapa Repairing , Mega Gear Thhiya Nut Bolt , Mega Half Engine Servicing , Mega Half Yoke Opening Fitting , Mega Head Bolt , Mega Head Bolt Ke Block Me Thread Making , Mega Head Bolt Nikalana , Mega Head Bolt With Woisher , Mega Head Dowel , Mega Head Elbow , Mega Head Facing , Mega Head Lathe Work , Mega Head Repairing , Mega Head Seat , Mega Head Service , Mega Head State Top Ghumana , Mega Head Stud , Mega Head Stud Me Slu Lagakar Thread Banana , Mega Head Valve , Mega High Pressure Valve , Mega Hose Pipe , Mega Hose Pipe Kit , Mega Hub Rear Nut Bolt 2 Long , Mega Hub Spacer , Mega Hydraulic Pipe , Mega Injector Coupler , Mega Injector Nozzle , Mega Injector Nozzle Service , Mega Intercooler Hose , Mega Jack Seal Kit , Mega Jack Tube Polish , Mega Kamani Patta 30 , Mega Kamani Patta 39 ( Xl ) , Mega Kit Fitting In Brake Master Cyinder , Mega Lift Cable ( 3 Core ) , Mega Lift Motor Repairing ( Xl ) , Mega Lift Switch Box , Mega Liner Slu , Mega Main Line Boring , Mega Main Oil Seal , Mega Nozzle Lock , Mega Nozzle Overflow Pipe , Mega Nozzle Pipe Commonrail To Pump , Mega Nozzle Servicing , Mega Nut Bolt 14 No. 1 Coller Wale , Mega Oil Chamber , Mega Oil Cooler Plate , Mega Oil Guage ( Inner ) , Mega Oil Hose , Mega Oil Jaali , Mega Oil Pipe , Mega Oil Pump Seal , Mega Oil Separator Pipe , Mega Packing Kit , Mega Pinion Bearing , Mega Pinion Bearing Small , Mega Pinion Nut , Mega Pinion Oil Seal , Mega Pinion Plate Unbending , Mega Piston , Mega Piston Ring , Mega Plastic Woisher , Mega Popular Shaft Pipe , Mega Popular Shaft Repairing , Mega Power Steering Belt ( Xl ) , Mega Pump Rottor , Mega Radiator Cap , Mega Radiator Fan Motor Assy. , Mega Radiator Fan Shroud , Mega Radiator Foundation , Mega Radiator Hose Pipe , Mega Radiator Hose Pipe ( Xl ) , Mega Rear Axel ( Lhs ) , Mega Rear Hub Oil Seal ( Inner + Outer ) , Mega Rear Kamani Aade Bolt 13 No ( Xl ) , Mega Rear Kamani Bush , Mega Rear Kamani Clip 2.5 ( Xl ) , Mega Rear Kamani Jhule Complete 24 No. Nut , Mega Rear Kamani Main Patta 38 , Mega Rear Kamani U Clamp 7 ( Xl ) , Mega Side Bearing , Mega Side Bearing Ki Seat Fitting , Mega Side Glass , Mega Silencer Elbow , Mega Silencer Gutke , Mega Silencer Jali , Mega Silencer Jali Complete , Mega Silencer Kothi Catalytic Covertor Assy. ) , Mega Silencer Kothi Se Bolt Nikalna , Mega Silencer Load Rubber Gutke , Mega Silencer Pipe ( Turbo To Silencer Jaali ) , Mega Silener Kothi Upper ( Near Turbo ) , Mega Slu Shim , Mega Star Bewel Woisher , Mega Steering Coloumn , Mega Steering Coloumn Bearing , Mega Steering Pump Oil Seal , Mega Tapit Coil , Mega Tapit Coin , Mega Tapit Cover Bolt 6 10 No. , Mega Tapit Cover Bolt Woisher , Mega Tapit Cover Cap , Mega Tapit Cover Slu Kit , Mega Tapit Katori , Mega Tapit Rubber , Mega Thermo Hose , Mega Thermostate O Ring , Mega Thread Making Of Pinion , Mega Timing Bolt , Mega Timing Cover , Mega Timing Gear ( Xl ) , Mega Timing Tensioner , Mega Tube 165D14 , Mega Turbo , Mega Turbo Air Pipe , Mega Turbo Hose Pipe , Mega Turbo Hose Return Pipe , Mega Turbo Ki Elbow , Mega Turbo Oil Pipe , Mega Turbo Repairing , Mega Turbo Stud , Mega Tyrod Assy. , Mega Vaccum Modulator , Mega Vaccume Pipe , Mega Valve Catcher , Mega Valve Oil Seal , Mega Valve Seat , Mega Water Elbow , Mega Wheel Bolt , Mega Wheel Cylinder , Mega Woisher , Mega Xl Crank Sensor , Mega Xl Master Cylinder With Booster Assy. , Needle Bearing ( 5Th Gear Main Shaft ) , Needle Roller Bearing ( 1St Speed Gear , Needle Roller Bearing ( 2Nd / 3Rd Gear , Needle Roller Bearing ( 2Nd / 3Rd Gear ) , Nozzle Assy, Piston Cooling ( Oiljet ) , Oil Cooler Assy , Oil Pressure Switch , Oil Seal ( Camshaft ) , Oil Seal ( Front Hub ) , Oil Seal-Crankshaft Front , Oil Sump Assy , Pressure Cap Assy , Pressure Plate , Propeller Shaft Assy , Radiator Assy , Rear Shockup , Release Bearing , Rev. Gear / Shifter Sleeve , Reverse Idler Gear , Roller Tappet Assy , Self 12 V Make Lucas , Self Starter , Service Indicator , Set-Valve - Intake & Exhaust , Shifter Sleeve ( 5Th Speed ) , Shifter Sleeve 3 / 4 , Steering Gear Box Assy , Synchrocone ( 3Rd / 4Th & 5Th Speed , Synchrocone ( 3Rd / 4Th & 5Th Speed ) , Synchrocone 1 / 2 Speed , Tappet , Thermostat Assy , Third Speed Gear , Thrust Woisher , Tie Rod Assy . , Timing Belt , Timing Gear; Camshaft , Uj Cross , Vacuum Pump Assy , Valve Guide , Vibration Damper , Water Pump Assy , Wiring Harness Engine , Wiring Harness Main , Eicher - 1095, 2016, 1075, 1090 Ei Air Compressure Repairing , Ei Diesel Filter F-983510 , Ei Suction Pump Jubaan Sp3l ( 4 Holes ) , Ei Sweeping Machine Pressure Jack Repair , Ei1075 Air Filter , Ei1075 Alternator Bearing Seat Making , Ei1075 Alternator Oil Pipe , Ei1075 Alternator Pump O Ring , Ei1075 Axle Packing , Ei1075 Brake Liner Fitting , Ei1075 Break Liner , Ei1075 Center Bearing Jhula , Ei1075 Center Joint Pipe , Ei1075 Center Motor Seal Kit , Ei1075 Clutch Paddle Bush Kit , Ei1075 Clutch Plate Facing , Ei1075 Clutch Plate Facing Fitting , Ei1075 Control Valve Kit , Ei1075 Control Valve Lever , Ei1075 Cut In Slu , Ei1075 Dog Kit , Ei1075 Drum Polish Cut , Ei1075 Flywheel Cut Polish , Ei1075 Hosing Bearing , Ei1075 Hub Sheem , Ei1075 Hyd. Bore In Plate , Ei1075 Hydraulic Jack Rod Repairing , Ei1075 Hydraulic Pipe 12Ft , Ei1075 Hydraulic Pump Hand Liver , Ei1075 Hydraulic Pump Motor , Ei1075 Kit Fitting In Master Cylinder , Ei1075 Lift Down & Lift , Ei1075 Lock Kit , Ei1075 Main Shaft Bearing , Ei1075 Master Cylinder Kit Major , Ei1075 Oil Seal Rear , Ei1075 Pressure Plate Cut Polish , Ei1075 Pto Cable , Ei1075 Survey Cylinder Kit , Ei1075 Survey Cylinder Kit Fitting , Ei1075 Survey Kit Major , Ei1075 Wheel Cylinder , Ei1095 -- 22 No Benjo Bolt With Woisher , Ei1095 -- Accelator End Make Eicher , Ei1095 -- Accelator Panja Make Eicher , Ei1095 -- Accelator Rod Make Eicher , Ei1095 -- Accelator Spring Make Eicher , Ei1095 -- Accelator Tann Make Eicher , Ei1095 -- Accelator Wire Make Pricol , Ei1095 -- Air Breather Machine Kit Majorjumbomake Tvs , Ei1095 -- Air Cleaner Assy Make Eicher , Ei1095 -- Air Cleaner Hose Make Rider , Ei1095 -- Air Cleaner Jaban , Ei1095 -- Air Cleaner Jaban Clip , Ei1095 -- Air Cleaner Ring Make Rider , Ei1095 -- Air Clener Clip Make Wikman , Ei1095 -- Air Duct Pipe Id201782 , Ei1095 -- Air Filter Body , Ei1095 -- Air Filter Cap , Ei1095 -- Air Filter Hose Pipe , Ei1095 -- Air Filter Make Eicher , Ei1095 -- Air Filter Ring , Ei1095 -- Air Meter Pressure Pipe Make Eicher , Ei1095 -- Air Pressure Meter-1 Make Make Eicher , Ei1095 -- Air Tank Brackat Patti Make Eicher , Ei1095 -- Air Tank Make Eicher , Ei1095 -- Air Tank Pipe Steel Make Eicher , Ei1095 -- Air Tank Pressur Machine Make Cd Tvs , Ei1095 -- Air Tank Rubber Make Rider , Ei1095 -- Air Tank Valve Make Cd Tvs , Ei1095 -- Air Tee Make Eicher , Ei1095 -- Axel Bolt Make Tvs , Ei1095 -- Axel Hub Pin ( Makkhi ) Make Track , Ei1095 -- Axel Ka Stud Make Tvs , Ei1095 -- Axel Packing Make Eicher , Ei1095 -- Axle Guide Pin Make Track , Ei1095 -- Axle Rear Jumbomake Eicher , Ei1095 -- Axle Rear Make Eicher , Ei1095 -- Banjo Bolt Make Mico , Ei1095 -- Block Dowel Pin , Ei1095 -- Block Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Ei1095 -- Brake Booster Kit , Ei1095 -- Brake Booster Repairing , Ei1095 -- Brake Cam Oil Seal , Ei1095 -- Brake Drum Front Make Eicher , Ei1095 -- Brake Gulli Make Track , Ei1095 -- Brake Hose Rear Make Cd Tvs , Ei1095 -- Brake Liner Gutka Make Track , Ei1095 -- Brake Liner Opening Fitting , Ei1095 -- Brake Liner Spring Make Track , Ei1095 -- Brake Lock Make Track , Ei1095 -- Brake Main Brake Pipe ( Tabe Ka ) Make Eicher , Ei1095 -- Brake Master Cylinder Assembly Make Tvs , Ei1095 -- Brake Master Cylinder Kit Major Jumbomake Tvs , Ei1095 -- Brake Master Cylinder Kit Make Tvs , Ei1095 -- Brake Master Cylinder Tee Make Tvs , Ei1095 -- Brake Oil Bottle Make Eicher , Ei1095 -- Brake Paddle Rubber Gutka Make Track , Ei1095 -- Brake Patti Make Track , Ei1095 -- Brake Pipe Front Make Randeep , Ei1095 -- Brake Pipe Master Cylinder To Brake Bottle Make Randeep , Ei1095 -- Brake Thali Nut Bolt Make Tvs , Ei1095 -- Brake Thali Rear Make Eicher , Ei1095 -- Brake Unloder Valve Machine Make Cd Tvs , Ei1095 -- Break Hose Front Make Tvs , Ei1095 -- Break Liner Guide Pin Spring Make Vsr , Ei1095 -- Break Liner Spring Make Track , Ei1095 -- Break Liner With Rivitfront Make Tvs , Ei1095 -- Break Liner With Rivit Rear Make Tvs , Ei1095 -- Break Pipe 1.25 Size Front Make Randeep , Ei1095 -- Break Pipe Steel Make Randeep , Ei1095 -- Cabin Khamba Lhs , Ei1095 -- Center Bolt 12 Long , Ei1095 -- Clip 6 , Ei1095 -- Clutch Adjuster Kit Make Eicher , Ei1095 -- Clutch Chimta Make Make Track , Ei1095 -- Clutch Cylinder Assy. Lower ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Assy. Lower ( Old Model ) Make Saini , Ei1095 -- Clutch Cylinder Assy. Upper ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Assy. Upper ( Old Model ) Make Saini , Ei1095 -- Clutch Cylinder Kit Lower Major ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Kit Lower Major ( Old Model ) Make Saini , Ei1095 -- Clutch Cylinder Kit Upper Major ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Kit Upper Major ( Old Model ) Make Saini , Ei1095 -- Clutch Fork Make Eicher , Ei1095 -- Clutch Hub Make Eicher , Ei1095 -- Clutch Kit Lower Jumbo Majormake Tvs , Ei1095 -- Clutch Kit Upper Jumbo Majormake Tvs , Ei1095 -- Clutch Paddle Bush Make Eicher , Ei1095 -- Clutch Paddle Pin Make Eicher , Ei1095 -- Clutch Paddle Rubber Make Rider , Ei1095 -- Clutch Paddle Thhiya Complete , Ei1095 -- Clutch Plate Facing Make Eicher , Ei1095 -- Clutch Plate Jumbomake Eicher , Ei1095 -- Clutch Plate Ka Facing Jumbomake Eicher , Ei1095 -- Clutch Plate Make Eicher , Ei1095 -- Clutch Release Bearing Jumbomake Eicher , Ei1095 -- Clutch Release Bearing Make Eicher , Ei1095 -- Clutch Withdrawl Plate Jumbomake Eicher , Ei1095 -- Clutch Yoke , Ei1095 -- Coloumn Left Side , Ei1095 -- Compressure Belt , Ei1095 -- Crank Key , Ei1095 -- Ddu Machine Kit , Ei1095 -- Ddu Machine Kit Fitting , Ei1095 -- Diesel Filter Long Make Eicher , Ei1095 -- Diesel Filter Small Make Eicher , Ei1095 -- Diesel Main Pipe ( Rubber ) , Ei1095 -- Diesel Return Pipe , Ei1095 -- Diesel Tank Complite Make Eicher , Ei1095 -- Diesel Tank Dhakkan Make Eicher , Ei1095 -- Diesel Tank Jali Nut Make Eicher , Ei1095 -- Diesel Tank Patti Make Eicher , Ei1095 -- Diesel Tank Rubber Make Rider , Ei1095 -- Differentiol Cage Body Bolt Make Tvs , Ei1095 -- Differentiol Check Nut Make Gs , Ei1095 -- Differentiol Crown Bearing Side Wala Make Eicher , Ei1095 -- Differentiol Crown Cage Body Make Eicher , Ei1095 -- Differentiol Crown Check Nut Make Eicher , Ei1095 -- Differentiol Crown Spinder Kit Make Eicher , Ei1095 -- Differentiol Crown Thali With Pinion Make Eicher , Ei1095 -- Differentiol Pinion Bearing Make Eicher , Ei1095 -- Differentiol Pinion Flange Make Rds , Ei1095 -- Differentiol Pinion Oil Seal Make Rider , Ei1095 -- Differentiol Star Chowkdi Pin Make Eicher , Ei1095 -- Differentiol Star Chowkdi Make Eicher , Ei1095 -- Disel Pipe Main Steel Make Randeep , Ei1095 -- Disel Return Vave Make Mico , Ei1095 -- Disk Repairing 7.50X16 Make Genuine , Ei1095 -- Door Glass Mechine Make Eicher , Ei1095 -- Door Lock With Handle Make Eicher , Ei1095 -- Door Sliding Handle Lhs , Ei1095 -- Drum Polish , Ei1095 -- Engineideal Gear Bush Make Eicher , Ei1095 -- Enginekem Bush Make Eicher , Ei1095 -- Enginekem Shaft Chaabi Make Eicher , Ei1095 -- Engine A.C.Pipe Make Eicher , Ei1095 -- Engine A.C.Ring Make Eicher , Ei1095 -- Engine Aircompressure Kit Make Tvs , Ei1095 -- Engine Air Compressure Head Make Cd Tvs , Ei1095 -- Engine Begin Bearing Make Eicher , Ei1095 -- Engine Block Make Eicher , Ei1095 -- Engine Cam Shaft Make Eicher , Ei1095 -- Engine Connecting Bush Make Eicher , Ei1095 -- Engine Connecting Rod Make Eicher , Ei1095 -- Engine Crank Grinding, Polish , Ei1095 -- Engine Crank Make Eicher , Ei1095 -- Engine Crank Make Eicher , Ei1095 -- Engine Foudation Front Jumbo Make Rider , Ei1095 -- Engine Foudation Rear Jumbomake Rider , Ei1095 -- Engine Foundation Front Make Rider , Ei1095 -- Engine Foundation Rear Make Rider , Ei1095 -- Engine Gajan Pin Make Eicher , Ei1095 -- Engine Head Gaskit Make Eicher , Ei1095 -- Engine Head Guide, Headseat Opening Fitting And Griding Facing , Ei1095 -- Engine Head Head Valve Catcher Make Eicher , Ei1095 -- Engine Head Seat Make Eicher , Ei1095 -- Engine Head Stick Make Eicher , Ei1095 -- Engine Head Valve Cap Make Eicher , Ei1095 -- Engine Head Valve Guide Make Eicher , Ei1095 -- Engine Head Valve Make Eicher , Ei1095 -- Engine Head Valve Seal Make Eicher , Ei1095 -- Engine Head Valve Steel Cap Make Eicher , Ei1095 -- Engine Ideal Gear Make Eicher , Ei1095 -- Engine Lift & Down , Ei1095 -- Engine Liner Slu Make Tiger Power , Ei1095 -- Engine Main Bearing Make Eicher , Ei1095 -- Engine Mounting & Dismounting , Ei1095 -- Engine Oil Cooler Assy Make Eicher , Ei1095 -- Engine Oil Cooler Cluster Rear Make Eicher , Ei1095 -- Engine Oil Cooler Ring Make Eicher , Ei1095 -- Engine Oil Filter Make Eicher , Ei1095 -- Engine Oil Filter Plate Jumbomake Eicher , Ei1095 -- Engine Oil Filter Plate Nut Bolt Jumbomake Tvs , Ei1095 -- Engine Oil Filter Rear Make Eicher , Ei1095 -- Engine Oil Filter With Ring Jumbomake Eicher , Ei1095 -- Engine Oil Gage Make Eicher , Ei1095 -- Engine Oil Hose Pipe Make Eicher , Ei1095 -- Engine Oil Pump Make Eicher , Ei1095 -- Engine Oil Return Hose Pipe Make Eicher , Ei1095 -- Engine Oil Seal Front Make Eicher , Ei1095 -- Engine Oil Seal Rear Make Eicher , Ei1095 -- Engine Over Flow Pipe Return Make Mico , Ei1095 -- Engine Over Flow Valve Make Mico , Ei1095 -- Engine Packing Kit Make Eicher , Ei1095 -- Engine Piston Make Eicher , Ei1095 -- Engine Piston Ring Make Eicher , Ei1095 -- Engine Plate Rear Make Eicher , Ei1095 -- Engine Rocker Chiriya With Bush Make Eicher , Ei1095 -- Engine Rocker Push Rod Make Eicher , Ei1095 -- Engine Tapit Gas Pipe Make Eicher , Ei1095 -- Engine Thrust Voisher Make Eicher , Ei1095 -- Engine Water Pump Assembly Jumbomake Eicher , Ei1095 -- Engine Water Pump Assembly Make Eicher , Ei1095 -- Engine Water Separator Make Mico , Ei1095 -- Fan Belt Jumbomake Fenner , Ei1095 -- Feed Pump Assy. , Ei1095 -- Foot Door Lhs , Ei1095 -- Free Gear Bush , Ei1095 -- Frontwind Sheld Glass Air Make Atul , Ei1095 -- Frontwind Sheld Glass Rubber Channel Make Alp , Ei1095 -- Front Glass Fitting , Ei1095 -- Fry Wheel Nut Bolt Make Tvs , Ei1095 -- Fry Wheel Ring Make Eicher , Ei1095 -- Fuel Pump Repairing , Ei1095 -- Full Engine Servicing , Ei1095 -- Gear 1St Make Eicher , Ei1095 -- Gear 2Nd Make Eicher , Ei1095 -- Gear 3Rdeicher , Ei1095 -- Gear 4Th Make Eicher , Ei1095 -- Gear Bhogali Kit Make Vsr , Ei1095 -- Gear Box Hosing Bolt Big Make Tvs , Ei1095 -- Gear Changer Bhongle Kit Make Vsr , Ei1095 -- Gear Changer Kangni Make Eicher , Ei1095 -- Gear Counter Shaft Complete Make Eicher , Ei1095 -- Gear End Big Jumbo 20;16 Make Eicher , Ei1095 -- Gear End Small Jumbo 20;16 Make Eicher , Ei1095 -- Gear Foundation Make Rider , Ei1095 -- Gear Lever Changer , Ei1095 -- Gear Lever Danda , Ei1095 -- Gear Lever End Big Make Eicher , Ei1095 -- Gear Lever End Small Make Eicher , Ei1095 -- Gear Lever Jhula , Ei1095 -- Gear Lever Pipe Complete Make Eicher , Ei1095 -- Gear Lever Ring Make Eicher , Ei1095 -- Gear Lever Thiya Make Eicher , Ei1095 -- Gear Liver Bush Kit Naylon Make Eicher , Ei1095 -- Gear Liver End Complete Make Eicher , Ei1095 -- Gear Liver Make Eicher , Ei1095 -- Gear Liver Rod Steel Make Eicher , Ei1095 -- Gear Main Shaft Make Eicher , Ei1095 -- Gear Tapa Kit , Ei1095 -- Gear Tapa Repairing , Ei1095 -- Gear Top Shaft Make Eicher , Ei1095 -- Head Compressure Air Pipe 27 No. Nut , Ei1095 -- Head Compressure Benjo Tee , Ei1095 -- Head Compressure Oil Pipe , Ei1095 -- Head Compressure Repairing , Ei1095 -- Hydraulic Pipe , Ei1095 -- Hydraulic Pump , Ei1095 -- Injector Nozzle Over All Kit Make Mico , Ei1095 -- Injector Nozzle Pipe Make Eicher , Ei1095 -- Injector Nozzle Servicing , Ei1095 -- Injector Pump , Ei1095 -- Injector Pump Hosing , Ei1095 -- Injector Pump Over All Kit Make Mico , Ei1095 -- Injector Pump Piston , Ei1095 -- Injector Pump Rign , Ei1095 -- Injector Pump Servicing , Ei1095 -- Injector Pump Vain Pump , Ei1095 -- Inter Cooler Hose Pipe , Ei1095 -- Inter Cooler Hose Pipe Clip , Ei1095 -- Kamani 3 No. Patta Front Make Gs , Ei1095 -- Kamani 3 No. Patta Rear ( 1 ) Make Gs , Ei1095 -- Kamani 4 No. Patta Front Make Gs , Ei1095 -- Kamani 4 No. Patta Rear ( 2 ) Make Gs , Ei1095 -- Kamani 5 No. Patta Front Make Gs , Ei1095 -- Kamani 5 No. Patta Rear Make Gs , Ei1095 -- Kamani 6 No. Patta Front Make Gs , Ei1095 -- Kamani 6 No. Patta Rear Make Gs , Ei1095 -- Kamani A No. Patta Front Make Gs , Ei1095 -- Kamani A No. Patta Rear ( 3 ) Make Gs , Ei1095 -- Kamani Aade Nut Bolt Make Gs , Ei1095 -- Kamani B No. Patta Front Make Gs , Ei1095 -- Kamani B No. Patta Rear ( 4 ) Make Gs , Ei1095 -- Kamani Bolt And Nut Rear Make Gs , Ei1095 -- Kamani Bush Brass Make Gs , Ei1095 -- Kamani Bush Front Make Gs , Ei1095 -- Kamani Bush Rear Make Gs , Ei1095 -- Kamani Bush Rubber Make Gs , Ei1095 -- Kamani Center Bolt 7 Make Gs , Ei1095 -- Kamani Centre Bolt 6 Make Gs , Ei1095 -- Kamani Cup Bush Make Gs , Ei1095 -- Kamani Jhula Front Make Gs , Ei1095 -- Kamani Jhula Rear Make Gs , Ei1095 -- Kamani Mada Front Make Gs , Ei1095 -- Kamani Mada Rear Make Gs , Ei1095 -- Kamani Main Front Make Gs , Ei1095 -- Kamani Main Rear Make Gs , Ei1095 -- Kamani Pin Front Make Gs , Ei1095 -- Kamani Pin Rear Make Gs , Ei1095 -- Kamani Pin Rear Make Gs , Ei1095 -- Kamani Qvaterpin Make Gs , Ei1095 -- Kamani Thiya Bolt Nut Make Tvs , Ei1095 -- Kamani Thiya Front Make Gs , Ei1095 -- Kamani Thiya Rear Make Gs , Ei1095 -- Kamani U Clamp 14 Rear Make Gs , Ei1095 -- Kamani U Clamp 7 Front Make Gs , Ei1095 -- Kamani U Clamp Thiya Make Gs , Ei1095 -- King Pin Set Complete With Bearing, Bush, Pin Make Srmt , Ei1095 -- Main Line Boring , Ei1095 -- Main Line Switch , Ei1095 -- Mudpump Flanch Stud With Nut , Ei1095 -- Mudpump Impeller Nut , Ei1095 -- Nozzle , Ei1095 -- Nozzle O Ring , Ei1095 -- Nozzle Woisher , Ei1095 -- Nut Bolt 12 No. 1 , Ei1095 -- Oil Cooler Pipe , Ei1095 -- Oil Jet , Ei1095 -- Outer Handle Left Side , Ei1095 -- Pressure Plate Assembly Make Eicher , Ei1095 -- Pressure Plate Assy. Jumbomake Eicher , Ei1095 -- Pressure Plate Finger Kit Jumbomake Eicher , Ei1095 -- Pressure Plate Spring Jumbomake Eicher , Ei1095 -- Pressure Plate Tawa Jumbomake Eicher , Ei1095 -- Pro Seat Cover Fitting , Ei1095 -- Pro Seat Cushing Work , Ei1095 -- Pro Side Door Repairing , Ei1095 -- Propeller Shaft Centerbearingflange Jumbomake Rds , Ei1095 -- Propeller Shaft Center Bearing Bracket Make Eicher , Ei1095 -- Propeller Shaft Center Bearing Complete Eicher , Ei1095 -- Propeller Shaft Center Bearing Flanch Make Rds , Ei1095 -- Propeller Shaft Center Bearing Jumbomake Rds , Ei1095 -- Propeller Shaft Center Bearing Rubber Make Rider , Ei1095 -- Propeller Shaft Center Bearing Teeth Jumbomake Rds , Ei1095 -- Propeller Shaft Centre Bearing Teeth Make Rds , Ei1095 -- Propeller Shaft Cross Holder Jumbomake Rds , Ei1095 -- Propeller Shaft Cross Holder Make Rds , Ei1095 -- Propeller Shaft Cross Make Rds , Ei1095 -- Propeller Shaft Front Teeth Jumbomake Rds , Ei1095 -- Propeller Shaft Full Yog Make Rds , Ei1095 -- Propeller Shaft Nut Bolt 17 No. Make Tvs , Ei1095 -- Propeller Shaft Nut Bolt Jumbomake Tvs , Ei1095 -- Propeller Shaft Rear Teeth Make Rds , Ei1095 -- Propeller Shaft U.J.Cross Jumbomake Rds , Ei1095 -- Pto Flanch , Ei1095 -- Pto Pump , Ei1095 -- Pto Shaft , Ei1095 -- Push Rod Assy Make Eicher , Ei1095 -- Push Rod Kit Make Eicher , Ei1095 -- Radiator Bolt Spring Voisher With Nut Make Tvs , Ei1095 -- Radiator Cap , Ei1095 -- Radiator Fan Make Eicher , Ei1095 -- Radiator Filler Neck , Ei1095 -- Radiator Filter Neck , Ei1095 -- Radiator Foundation Make Rider , Ei1095 -- Radiator Hose Clip Make Wikman , Ei1095 -- Radiator Hose Pipe Set Jumbomake Rider , Ei1095 -- Radiator Hose Upper + Lower Make Rider , Ei1095 -- Radiator Thermostat Valve Make Eicher , Ei1095 -- Rivet 3 Soot Moti 1 Long , Ei1095 -- Side Door Glass Make Atul , Ei1095 -- Side Door Glass Rubber Channel Make Alp , Ei1095 -- Side Glass Make Somex , Ei1095 -- Side Glass Thhiya Make Vsr , Ei1095 -- Silencer Clip Make Gmi , Ei1095 -- Silencer Jaali Opening Fitting , Ei1095 -- Silencer Kothi With Packing Make Eicher , Ei1095 -- Silencer Packing ( Two Hole ) Make Eicher , Ei1095 -- Silencer Patti , Ei1095 -- Slu Opening Fitting , Ei1095 -- Steerin U Arm , Ei1095 -- Steering Bearing , Ei1095 -- Steering Box Bearing , Ei1095 -- Steering Chilam , Ei1095 -- Steering Cross Assembly Make Rds , Ei1095 -- Steering Oil Seal Big , Ei1095 -- Steering Oil Seal Small , Ei1095 -- Steering Rod Assy. Complete , Ei1095 -- Steering Verm Rod , Ei1095 -- Steering Warm Rod , Ei1095 -- Tapit Cover Ring , Ei1095 -- Tensioner Pully Assy. , Ei1095 -- Tie Rod Complete , Ei1095 -- Tie Rod End Make Rane , Ei1095 -- Timing Pully , Ei1095 -- Turbo Hose Pipe , Ei1095 -- Turbo Repairing , Ei1095 -- U Clamp 13 , Ei1095 -- Unloader Valve Machine Repairing , Ei1095 -- Unloadr Valve Machine Kit , Ei1095 -- Water Separetor , Ei1095 -- Wheel Alignment , Ei1095 -- Wheel Alignment Jumbo , Ei1095 -- Wheel Bearing Inner Front Make Eicher , Ei1095 -- Wheel Bearing Inner Rear Make Eicher , Ei1095 -- Wheel Bearing Outer Front Make Eicher , Ei1095 -- Wheel Bearing Outer Rear Make Eicher , Ei1095 -- Wheel Bolt & Nut Front N / M Make Gs , Ei1095 -- Wheel Bolt Front + Double Nut O / M Make Gs , Ei1095 -- Wheel Bolt Nut Rear N / M Make Gs , Ei1095 -- Wheel Bolt Rear + Double Nut O / M Make Gs , Ei1095 -- Wheel Cylinder Assembly Front N / M Make Tvs , Ei1095 -- Wheel Cylinder Assembly Front O / M Make Saini , Ei1095 -- Wheel Cylinder Assembly Rear N / M Make Tvs , Ei1095 -- Wheel Cylinder Assembly Rear O / M Make Saini , Ei1095 -- Wheel Cylinder Kit Front O / M Make Saini , Ei1095 -- Wheel Cylinder Kit Rear O / M Make Saini , Ei1095 -- Wheel Oil Seal Inner Front Make Eicher , Ei1095 -- Wheel Oil Seal Inner Rear Make Eicher , Ei1095 -- Wheel Oil Seal Outer Front Make Eicher , Ei1095 -- Wheel Oil Seal Outer Rear Make Eicher , Ei2016 Accelator End Make Eicher , Ei2016 Accelator Panja Make Eicher , Ei2016 Accelator Rod Make Eicher , Ei2016 Accelator Spring Make Eicher , Ei2016 Accelator Tann Make Eicher , Ei2016 Accelator Wire Make Pricol , Ei2016 Adopter , Ei2016 Air Breather , Ei2016 Air Breather Machine Kit Majorjumbo 20.16 Make Tvs , Ei2016 Air Cleaner Assy Make Eicher , Ei2016 Air Cleaner Hose Make Rider , Ei2016 Air Cleaner Ring Make Rider , Ei2016 Air Clener Clip Make Wikman , Ei2016 Air Filter Make Eicher , Ei2016 Air Meter Pressure Pipe Make Eicher , Ei2016 Air Pressure Meter-1 Make Make Eicher , Ei2016 Air Tank Brackat Patti Make Eicher , Ei2016 Air Tank Clip , Ei2016 Air Tank Make Eicher , Ei2016 Air Tank Pipe Steel Make Eicher , Ei2016 Air Tank Pressur Machine Make Cd Tvs , Ei2016 Air Tank Rubber Make Rider , Ei2016 Air Tank Valve Make Cd Tvs , Ei2016 Air Tee Make Eicher , Ei2016 Axel Bolt Make Tvs , Ei2016 Axel Hub Pin ( Makkhi ) Make Track , Ei2016 Axel Ka Stud Make Tvs , Ei2016 Axel Packing Make Eicher , Ei2016 Axle Guide Pin Make Track , Ei2016 Axle Rear Jumbomake Eicher , Ei2016 Axle Rear Make Eicher , Ei2016 Banjo Bolt Make Mico , Ei2016 Bearing 6009 , Ei2016 Bearing Nup-310 , Ei2016 Block Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Ei2016 Blower Pully , Ei2016 Blower Repairing , Ei2016 Brake Drum Front Make Eicher , Ei2016 Brake Gulli Make Track , Ei2016 Brake Hose Rear Make Cd Tvs , Ei2016 Brake Liner Gutka Make Track , Ei2016 Brake Liner Spring Make Track , Ei2016 Brake Lock Make Track , Ei2016 Brake Main Brake Pipe ( Tabe Ka ) Make Eicher , Ei2016 Brake Master Cylinder Assembly Make Tvs , Ei2016 Brake Master Cylinder Kit Major Jumbo 20.16 Make Tvs , Ei2016 Brake Master Cylinder Kit Make Tvs , Ei2016 Brake Master Cylinder Tee Make Tvs , Ei2016 Brake Oil Bottle Make Eicher , Ei2016 Brake Paddle Rubber Gutka Make Track , Ei2016 Brake Patti Make Track , Ei2016 Brake Pipe Front Make Randeep , Ei2016 Brake Pipe Master Cylinder To Brake Bottle Make Randeep , Ei2016 Brake Thali Nut Bolt Make Tvs , Ei2016 Brake Thali Rear Make Eicher , Ei2016 Brake Unloder Valve Machine Make Cd Tvs , Ei2016 Branded Bush Fitting , Ei2016 Break Booster Katora , Ei2016 Break Booster Kit , Ei2016 Break Booster Repairing , Ei2016 Break Hose Front Make Tvs , Ei2016 Break Liner Guide Pin Spring Make Vsr , Ei2016 Break Liner Spring Make Track , Ei2016 Break Liner With Rivitfront Make Tvs , Ei2016 Break Liner With Rivit Rear Make Tvs , Ei2016 Break Pipe 1.25 Size Front Make Randeep , Ei2016 Break Pipe Steel Make Randeep , Ei2016 Break Pressure Pipe , Ei2016 Cabin Lock , Ei2016 Catcher , Ei2016 Center Bearing Flanch , Ei2016 Center Bearing Nut , Ei2016 Center Bolt 22 No. 16 , Ei2016 Check Nut , Ei2016 Clutch Adjuster Kit Make Eicher , Ei2016 Clutch Chimta Make Make Track , Ei2016 Clutch Clavis , Ei2016 Clutch Cylinder Assy. Lower ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Assy. Lower ( Old Model ) Make Saini , Ei2016 Clutch Cylinder Assy. Upper ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Assy. Upper ( Old Model ) Make Saini , Ei2016 Clutch Cylinder Kit Lower Major ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Kit Lower Major ( Old Model ) Make Saini , Ei2016 Clutch Cylinder Kit Upper Major ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Kit Upper Major ( Old Model ) Make Saini , Ei2016 Clutch Fork Make Eicher , Ei2016 Clutch Hub Make Eicher , Ei2016 Clutch Kit Lower Jumbo Major 20.16 Make Tvs , Ei2016 Clutch Kit Upper Jumbo Major 20.16 Make Tvs , Ei2016 Clutch Paddle , Ei2016 Clutch Paddle Bush Make Eicher , Ei2016 Clutch Paddle Pin Make Eicher , Ei2016 Clutch Paddle Rubber Make Rider , Ei2016 Clutch Plate , Ei2016 Clutch Plate Facing Fitting , Ei2016 Clutch Plate Facing Make Eicher , Ei2016 Clutch Plate Jumbo 20.16 Make Eicher , Ei2016 Clutch Plate Ka Facing Jumbo 20.16 Make Eicher , Ei2016 Clutch Plate Make Eicher , Ei2016 Clutch Release Bearing Jumbo 20.16 Make Eicher , Ei2016 Clutch Release Bearing Make Eicher , Ei2016 Clutch Withdrawl Plate Jumbo 20.16 Make Eicher , Ei2016 Coolent Box , Ei2016 Crank Cut Polish Maal Filling , Ei2016 Ddu Machine Kit Repairing , Ei2016 Ddu Maching Kit , Ei2016 Ddu Maching Kit Fitting , Ei2016 Diesel Filter Long Make Eicher , Ei2016 Diesel Filter Small Make Eicher , Ei2016 Diesel Tank Complite Make Eicher , Ei2016 Diesel Tank Dhakkan Make Eicher , Ei2016 Diesel Tank Jali Nut Make Eicher , Ei2016 Diesel Tank Patti Make Eicher , Ei2016 Diesel Tank Rubber Make Rider , Ei2016 Differentiol Cage Body Bolt Make Tvs , Ei2016 Differentiol Check Nut Make Gs , Ei2016 Differentiol Crown Bearing Side Wala Make Eicher , Ei2016 Differentiol Crown Cage Body Make Eicher , Ei2016 Differentiol Crown Check Nut Make Eicher , Ei2016 Differentiol Crown Spinder Kit Make Eicher , Ei2016 Differentiol Crown Thali With Pinion Make Eicher , Ei2016 Differentiol Pinion Bearing Make Eicher , Ei2016 Differentiol Pinion Flange Make Rds , Ei2016 Differentiol Pinion Oil Seal Make Rider , Ei2016 Differentiol Star Chowkdi Pin Make Eicher , Ei2016 Differentiol Star Chowkdi Make Eicher , Ei2016 Disel Pipe Main Steel Make Randeep , Ei2016 Disel Return Vave Make Mico , Ei2016 Disk Repairing 7.50X16 Make Genuine , Ei2016 Dog Kit , Ei2016 Door Glass Handle , Ei2016 Door Glass Mechine Make Eicher , Ei2016 Door Inner Handle ( Rhs+Lhs ) , Ei2016 Door Lock Thessi ( Rhs+Lhs ) , Ei2016 Door Lock With Handle Make Eicher , Ei2016 Door Ply , Ei2016 Engaging Gear , Ei2016 Enginekem Bush Make Eicher , Ei2016 Enginekem Shaft Chaabi Make Eicher , Ei2016 Engine A.C.Pipe Make Eicher , Ei2016 Engine A.C.Ring Make Eicher , Ei2016 Engine Aircompressure Kit Make Tvs , Ei2016 Engine Air Compressure Head Make Cd Tvs , Ei2016 Engine Bigen Bearing Make Eicher , Ei2016 Engine Block Make Eicher , Ei2016 Engine Cam Shaft Make Eicher , Ei2016 Engine Connecting Bush Make Eicher , Ei2016 Engine Connecting Rod Make Eicher , Ei2016 Engine Crank Grinding, Polish , Ei2016 Engine Crank Make Eicher , Ei2016 Engine Crank Make Eicher , Ei2016 Engine Foudation Front Jumbo 20.16 Make Rider , Ei2016 Engine Foudation Rear Jumbo 20.16 Make Rider , Ei2016 Engine Foundation Front Make Rider , Ei2016 Engine Foundation Rear Make Rider , Ei2016 Engine Gajan Pin Make Eicher , Ei2016 Engine Head Gaskit Make Eicher , Ei2016 Engine Head Guide, Headseat Opening Fitting And Griding Facing , Ei2016 Engine Head Head Valve Catcher Make Eicher , Ei2016 Engine Head Seat Make Eicher , Ei2016 Engine Head Stick Make Eicher , Ei2016 Engine Head Valve Cap Make Eicher , Ei2016 Engine Head Valve Guide Make Eicher , Ei2016 Engine Head Valve Make Eicher , Ei2016 Engine Head Valve Seal Make Eicher , Ei2016 Engine Head Valve Steel Cap Make Eicher , Ei2016 Engine Ideal Gear Bush Make Eicher , Ei2016 Engine Ideal Gear Make Eicher , Ei2016 Engine Liner Slu Make Tiger Power , Ei2016 Engine Main Bearing Make Eicher , Ei2016 Engine Oil Cooler Assy Make Eicher , Ei2016 Engine Oil Cooler Cluster Rear Make Eicher , Ei2016 Engine Oil Cooler Ring Make Eicher , Ei2016 Engine Oil Filter Make Eicher , Ei2016 Engine Oil Filter Plate Jumbo 20.16 Make Eicher , Ei2016 Engine Oil Filter Plate Nut Bolt Jumbo 20.16 Make Tvs , Ei2016 Engine Oil Filter Rear Make Eicher , Ei2016 Engine Oil Filter With Ring Jumbo 20.16 Make Eicher , Ei2016 Engine Oil Gage Make Eicher , Ei2016 Engine Oil Hose Pipe Make Eicher , Ei2016 Engine Oil Pipe , Ei2016 Engine Oil Pump Make Eicher , Ei2016 Engine Oil Return Hose Pipe Make Eicher , Ei2016 Engine Oil Seal Front Make Eicher , Ei2016 Engine Oil Seal Rear Make Eicher , Ei2016 Engine Over Flow Pipe Return Make Mico , Ei2016 Engine Over Flow Valve Make Mico , Ei2016 Engine Packing Kit Make Eicher , Ei2016 Engine Piston Make Eicher , Ei2016 Engine Piston Ring Make Eicher , Ei2016 Engine Plate Rear Make Eicher , Ei2016 Engine Rocker Chiriya With Bush Make Eicher , Ei2016 Engine Rocker Push Rod Make Eicher , Ei2016 Engine Tapit Gas Pipe Make Eicher , Ei2016 Engine Thrust Voisher Make Eicher , Ei2016 Engine Water Pump Assembly Jumbo 20.16 Make Eicher , Ei2016 Engine Water Pump Assembly Make Eicher , Ei2016 Engine Water Separator Make Mico , Ei2016 Fan Belt Jumbo 20.16 Make Fenner , Ei2016 Frontwind Sheld Glass Air Make Atul , Ei2016 Frontwind Sheld Glass Rubber Channel Make Alp , Ei2016 Front Brake Richit , Ei2016 Fry Wheel Nut Bolt Make Tvs , Ei2016 Fry Wheel Ring Make Eicher , Ei2016 Gear 1St Make Eicher , Ei2016 Gear 2Nd Make Eicher , Ei2016 Gear 3Rd Make Eicher , Ei2016 Gear 4Th Make Eicher , Ei2016 Gear Bhogali Kit Make Vsr , Ei2016 Gear Box Hosing Bolt Big Make Tvs , Ei2016 Gear Changer Bhongle Kit Make Vsr , Ei2016 Gear Changer Kangni Make Eicher , Ei2016 Gear Counter Shaft Complete Make Eicher , Ei2016 Gear End Big Jumbo 20;16 Make Eicher , Ei2016 Gear End Small Jumbo 20;16 Make Eicher , Ei2016 Gear Foundation Make Rider , Ei2016 Gear Lever End Big Make Eicher , Ei2016 Gear Lever End Small Make Eicher , Ei2016 Gear Lever Pipe Complete Make Eicher , Ei2016 Gear Lever Ring Make Eicher , Ei2016 Gear Lever Thiya Make Eicher , Ei2016 Gear Liver Bush Kit Naylon Make Eicher , Ei2016 Gear Liver End Complete Make Eicher , Ei2016 Gear Liver Make Eicher , Ei2016 Gear Liver Rod Steel Make Eicher , Ei2016 Gear Main Shaft Make Eicher , Ei2016 Gear Main Shaft Opening Fitting , Ei2016 Gear Top Shaft Make Eicher , Ei2016 Half Yoke Fitting , Ei2016 Hydraulic Jack Repairing , Ei2016 Injector Nozzle Over All Kit Make Mico , Ei2016 Injector Nozzle Pipe Make Eicher , Ei2016 Injector Pump Over All Kit Make Mico , Ei2016 Jetting Crank Pin , Ei2016 Jetting Crank Seat Making , Ei2016 Jetting Head Ss Valve , Ei2016 Jetting O Ring , Ei2016 Jetting Oil Ring , Ei2016 Jetting Ring , Ei2016 Jetting Woisher , Ei2016 Jumbo Pressure Tank Bracket , Ei2016 Kamani 3 No. Patta Front Make Gs , Ei2016 Kamani 3 No. Patta Rear ( 1 ) Gs , Ei2016 Kamani 4 No. Patta Front Make Gs , Ei2016 Kamani 4 No. Patta Rear ( 2 ) Make Gs , Ei2016 Kamani 5 No. Patta Front Make Gs , Ei2016 Kamani 5 No. Patta Rear Make Gs , Ei2016 Kamani 6 No. Patta Front Make Gs , Ei2016 Kamani 6 No. Patta Rear Make Gs , Ei2016 Kamani A No. Patta Front Make Gs , Ei2016 Kamani A No. Patta Rear ( 3 ) Gs , Ei2016 Kamani Aade Nut Bolt Make Gs , Ei2016 Kamani B No. Patta Front Make Gs , Ei2016 Kamani B No. Patta Rear ( 4 ) Make Gs , Ei2016 Kamani Bolt And Nut Rear Make Gs , Ei2016 Kamani Bush Brass Make Gs , Ei2016 Kamani Bush Front Make Gs , Ei2016 Kamani Bush Rear Make Gs , Ei2016 Kamani Bush Rubber Make Gs , Ei2016 Kamani Center Bolt 7 Make Gs , Ei2016 Kamani Centre Bolt 6 Make Gs , Ei2016 Kamani Cup Bush Make Gs , Ei2016 Kamani Jhula Front Make Gs , Ei2016 Kamani Jhula Rear Make Gs , Ei2016 Kamani Mada Front Make Gs , Ei2016 Kamani Mada Rear Make Gs , Ei2016 Kamani Main Front Make Gs , Ei2016 Kamani Main Rear Make Gs , Ei2016 Kamani Pin Front Make Gs , Ei2016 Kamani Pin Rear Make Gs , Ei2016 Kamani Pin Rear Make Gs , Ei2016 Kamani Qvaterpin Make Gs , Ei2016 Kamani Thiya Bolt Nut Make Tvs , Ei2016 Kamani Thiya Front Make Gs , Ei2016 Kamani Thiya Rear Make Gs , Ei2016 Kamani U Clamp 14 Rear Make Gs , Ei2016 Kamani U Clamp 7 Front Make Gs , Ei2016 Kamani U Clamp Thiya Make Gs , Ei2016 King Pin Set Complete With Bearing, Bush, Pin Make Srmt , Ei2016 Lock Thessi Screw 4 Point , Ei2016 Main Shaft Bolt , Ei2016 New Bolt Fitting After Top Making , Ei2016 Niddle Bearing , Ei2016 Nut Bolt 2 13 No. , Ei2016 Nut Bolt 2 19 No. , Ei2016 P.T.O. Foundation , Ei2016 P.T.O. Gear , Ei2016 P.T.O. Gear Pin , Ei2016 P.T.O. Oil Ring , Ei2016 Paddle Bush Kit , Ei2016 Pinion Shaft , Ei2016 Popular Shaft , Ei2016 Press Propeller Shaft Pipe 4.5 Ft , Ei2016 Pressure Plate Assembly Make Eicher , Ei2016 Pressure Plate Assy. Jumbo 20.16 Make Eicher , Ei2016 Pressure Plate Chawal Bearing , Ei2016 Pressure Plate Cut Polish , Ei2016 Pressure Plate Finger Kit Fitting , Ei2016 Pressure Plate Finger Kit Jumbo 20.16 Make Eicher , Ei2016 Pressure Plate Spring Jumbo 20.16 Make Eicher , Ei2016 Pressure Plate Tawa Jumbo 20.16 Make Eicher , Ei2016 Pressure Polish Kit , Ei2016 Propeller Shaft Center Bearing Bracket Make Eicher , Ei2016 Propeller Shaft Center Bearing Complete Eicher , Ei2016 Propeller Shaft Center Bearing Flanch Make Rds , Ei2016 Propeller Shaft Center Bearing Flange Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Center Bearing Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Center Bearing Rubber Make Rider , Ei2016 Propeller Shaft Center Bearing Teeth Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Centre Bearing Teeth Make Rds , Ei2016 Propeller Shaft Cross Holder Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Cross Holder Make Rds , Ei2016 Propeller Shaft Cross Make Rds , Ei2016 Propeller Shaft Front Teeth Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Full Yog Make Rds , Ei2016 Propeller Shaft Nut Bolt 17 No. Make Tvs , Ei2016 Propeller Shaft Nut Bolt Jumbo 20.16 Make Tvs , Ei2016 Propeller Shaft Rear Teeth Make Rds , Ei2016 Propeller Shaft Teeth Opening Fitting , Ei2016 Propeller Shaft U.J.Cross Jumbo 20.16 Make Rds , Ei2016 Pto Bearing 6206 , Ei2016 Pto Gear Box Foundation , Ei2016 Pto Gear Shaft , Ei2016 Pto Shaft Thread Making , Ei2016 Push Rod Assy Make Eicher , Ei2016 Push Rod Kit Make Eicher , Ei2016 Radiator Bolt Spring Voisher With Nut Make Tvs , Ei2016 Radiator Fan Make Eicher , Ei2016 Radiator Foundation Make Rider , Ei2016 Radiator Hose Clip Make Wikman , Ei2016 Radiator Hose Pipe Set Jumbo 20.16 Make Rider , Ei2016 Radiator Hose Upper + Lower Make Rider , Ei2016 Radiator Thermostat Valve Make Eicher , Ei2016 Reduser 1X3 / 4 , Ei2016 Shaft Se Tute Bolt Nikalna , Ei2016 Side Door Glass Make Atul , Ei2016 Side Door Glass Rubber Channel Make Alp , Ei2016 Side Glass Make Somex , Ei2016 Side Glass Thhiya Make Vsr , Ei2016 Silencer Clip Make Gmi , Ei2016 Silencer Jaali , Ei2016 Silencer Kothi With Packing Make Eicher , Ei2016 Silencer Packing ( Two Hole ) Make Eicher , Ei2016 Sm Red Nozzle Scrapper 04 , Ei2016 Sm Red Nozzle Scrapper Pad 08 , Ei2016 Sm Red Nozzle Scrapper Pad 28 , Ei2016 Sm Rubber Hose 250X1250 Mm , Ei2016 Sm Rubber Sheet 8Mm , Ei2016 Sm Solid Tyre 10X2.5 , Ei2016 Solenoid Pressure Valve , Ei2016 Steering Benjo Bolt , Ei2016 Steering Cross Assembly Make Rds , Ei2016 Steering Oil Filter , Ei2016 Steering Pipe , Ei2016 Sweeping Mach. Blower Bearing Cup , Ei2016 Sweeping Machine Accelerator Cable , Ei2016 Sweeping Machine Blower Bearing , Ei2016 Sweeping Machine Jack Repair , Ei2016 Sweeping Maching 6 / 8 Pipe Jointer , Ei2016 Synchronizing Ring , Ei2016 Tapit Cover Packing , Ei2016 Teflon Valve ( Ss ) , Ei2016 Tie Rod End Make Rane , Ei2016 Top Shaft Bearing ( Big ) , Ei2016 Top Shaft Bearing ( Small ) , Ei2016 Valve , Ei2016 Valve 1 Brass , Ei2016 Wheel Alignment , Ei2016 Wheel Alignment Jumbo 20.16 , Ei2016 Wheel Bearing Inner Front Make Eicher , Ei2016 Wheel Bearing Inner Rear Make Eicher , Ei2016 Wheel Bearing Outer Front Make Eicher , Ei2016 Wheel Bearing Outer Rear Make Eicher , Ei2016 Wheel Bolt & Nut Front N / M Make Gs , Ei2016 Wheel Bolt Front + Double Nut O / M Make Gs , Ei2016 Wheel Bolt Nut Rear N / M Make Gs , Ei2016 Wheel Bolt Rear + Double Nut O / M Make Gs , Ei2016 Wheel Cylinder Assembly Front N / M Make Tvs , Ei2016 Wheel Cylinder Assembly Front O / M Make Saini , Ei2016 Wheel Cylinder Assembly Rear N / M Make Tvs , Ei2016 Wheel Cylinder Assembly Rear O / M Make Saini , Ei2016 Wheel Cylinder Kit Front O / M Make Saini , Ei2016 Wheel Cylinder Kit Rear O / M Make Saini , Ei2016 Wheel Oil Seal Inner Front Make Eicher , Ei2016 Wheel Oil Seal Inner Rear Make Eicher , Ei2016 Wheel Oil Seal Outer Front Make Eicher , Ei2016 Wheel Oil Seal Outer Rear Make Eicher , 4. Ashok Leyland Dost5th C / S Gear&Engaging Gear Assy , 5Th Gear O / P Sft , 5Th Gear Removal Tool , A Of Catalytic Convertercc , Abs Assy-Shock, Fr , Abs Assy-Shock, Rr , Abs-Compl Fr / Rr Shock , Accelarator Cable , Air Brthr ( Metallic ) , Air Filter Element , Al 307 Stg Gear W & N Sub Assy , Aluminium Oil Cooler , Arm Compl-Ws Wiper , Arm, Reverse Gear , Assembly Of Power Steering Pu , Assembly Reverse Idler Gear , Assy Air Filter , Assy–Frt Susp ( Lh + Rh ) , Auxiliary Belt Without Power , Axial Stopper, Rev. Gear Idler Sft , Back Leak Connectorinjector , Back Panel Assembly , Back Plate Assy Lh / Rh , Bag-Tool , Ball Brg Input Sft , Ball Brg O / P Sft Rr , Ball Joint 11.05Mm Groove Height ( Tyrod End ) , Ball;Detent Gear Shift , Ball;Thrust Wash , Band-Hose , Banjounit Pumpfuel Inlet , Banjo Bolt - All Type And Size , Bearing All Size And Type , Belleville Spr , Bellow Kit , Bellow-Air Pre Filter Outlet , Belt All Size And Type , Bracket Alternator And Power Steering , Bracket Alternatorbottom , Bracket Egr Cooler , Bracket Evrv Vacuum Modulator , Bracket Psp Bottom , Bracketac Compressor , Bracketalternator And Power S , Brake Assy-Rr, Lh / Rh , Breather , Brg Assy Tapered Roller , Brg Assy-Fr Wheel, Inr , Brg Assy-Fr Wheel, Otr , Brg Assy-Kingpin , Brg Cover , Brg;Ang Ball, Cluster , Brg;Ball Top Gear , Brg;Ball, Ctnrend , Brg;Ball, Ctnrfrt , Brg;Ball, Main Sftend , Brg;Ndl, Main Sft , Brg;Radial Ball, Main Sft , Brktassly Cbl Holding Selection , Brktassly Cbl Holding Shift , Brkt - Mbr Assy , Brkt - Rr Bmpr Rub , Caliper Assy-Fr Brake, Lh / Rh , Cam Oil Seal Pressing Jig , Cam Shaft , Camshaft Pulley , Cap-Hub , Carr Assy-Spare Wheel , Carrier 1St / 2Nd O / P Sft , Carrier 3Rd / 4Th O / P Sft 3 , Carrier 5Th Gear Counter Sft , Carrier Asm, Caps And , Cartridge-Fuel Filter , Case, Differential ( Mach ) , Circular Clip All Size And Type , Clip-Fr Fdr Protr , Cluster Gear - Msg5t , Clutch Cable , Clutch Plate , Clutch Release Return Spring , Collar-Bush Tens Rod Mtg , Common Rail , Common Rail Imv Pump , Companion Flg Fin , Coolant Temperature Sensor , Cooling Unit , Counter Sft , Diesel Filter Body , Diesel Filter Element , Diesel Tank Fuel Pump Assembly , Disc-Fr Brake , Door Assy-Fr, Lh / Rh , Dost 14 No. Bolt With Nut 1 Long , Dost Air Filter Hose Pipe , Dost Air Mark Coupler , Dost Alternator Hose Pipe , Dost Alternator Oil Pipe , Dost Alternator Oil Seal , Dost Alternator Slipring , Dost Altinator Bolt , Dost Axle Bearing , Dost Axle Hub , Dost Axle Hub Opening Fitting , Dost Axle Oil Seal , Dost Axle Slu , Dost Bearing Seat Making , Dost Begin Bearing , Dost Block Dowel Pin , Dost Block Repairing , Dost Brake Hose Pipe , Dost Brake Master Cylinder , Dost Brake Pad , Dost Brake Pipe 10 No. Nut 18 , Dost Brake Temperature Tee Remove , Dost Brake Woisher , Dost Cage Body Opening Fitting , Dost Cam Makkhi , Dost Cam Oil Seal , Dost Center Bolt 4 ( 3 Soot ) , Dost Chasis Buffer Gutke , Dost Check Nut , Dost Cliper Bolt , Dost Clutch Plate Bs-Iv , Dost Clutch Pressure Opening Fitting , Dost Commonrail Servicing , Dost Coolant Bottle With Cap , Dost Coolent Bottle , Dost Coolent Bottle Cap , Dost Coolent Bottle With Cap , Dost Coolent Hosepipe , Dost Cr Bearing , Dost Cr Bush , Dost Crank Repairing , Dost Crank Sensor , Dost Cross Holder , Dost Crown Pinion Repairing , Dost Dhadi Mouth Making , Dost Dhadi Repairing , Dost Dhadi Thhiya Nut Bolt , Dost Diesel Filter ( Steel ) 2 Mouth , Dost Diesel Filter Assy. ( Iron ) , Dost Diesel Filter Coupler , Dost Diesel Filter Sensor , Dost Diesel Fuel Tank Unit Assy. Bs-Iv , Dost Diesel Pipe , Dost Diesel Pipe 3 Mouth , Dost Diesel Pipe Bs-Iv , Dost Diesel Return Pipe , Dost Diesel Tank Cap , Dost Diesel Tank Patti , Dost Diffrential Hozing Assy , Dost Door Glass Catcher , Dost Door Glass Handle , Dost Ecu Flashing , Dost Egr Valve Coupler , Dost Engine Foundation , Dost Engine Foundation Bolt , Dost Engine Foundation Nut Bolt , Dost Engine Foundation Rubber , Dost Engine Head , Dost Engine Mounting , Dost Engine Oil Seal , Dost Fark Lever , Dost Fevikwik 20 Gm , Dost Field Bolt , Dost Field Bolt Soldering , Dost Fip , Dost Fip Pump Rotter , Dost Fip Pump Servicing , Dost Flashing , Dost Flywheel Bearing 6202 , Dost Flywheel Cut Polish , Dost Flywheel Facing , Dost Front Bumper , Dost Front Hub Lhs , Dost Front Kamani Bush , Dost Front Kamani Front Mouth Bush , Dost Front Kamani Rear Mouth Bush , Dost Front Main Glass Fitting , Dost Front Wheel Thrust Woisher , Dost Front Wheel Top Ghumana , Dost Fuel Pump Servicing , Dost Fuel Pump Solenoid Switch , Dost Fuel Pump Solenoid Switch Coupler , Dost Full Engine Service , Dost Full Yoke , Dost Gear Box Bolt , Dost Gear Box Repairing , Dost Gear Box Servicing , Dost Gear Cable Lock Patti , Dost Gear Chilam , Dost Gear Dog Kit , Dost Gear Foundation , Dost Gear Hosing Repairing , Dost Gear Mounting , Dost Gear Tapa , Dost Gear Tapa Kit , Dost Gear Tapa Repairing , Dost Glass Pest , Dost Half Yoke , Dost Half Yoke Opening Fitting , Dost Head Cam Pully , Dost Head Repairing , Dost Head Servicing , Dost Head Spring , Dost Hose Pipe , Dost Hose Pipe Kit , Dost Hose Pipe Kit Clip , Dost Hub Bolt No. 27 , Dost Hub Oil Seal , Dost Hydraulic Filter , Dost Hydraulic Guage Pipe , Dost Hydraulic Jack , Dost Hydraulic Jack Nut , Dost Hydraulic Jack Pin , Dost Hydraulic Jack Seal Kit , Dost Hydraulic Jack Tube Polish , Dost Hydraulic Lift Motor Bush , Dost Hydraulic Motor Repairing , Dost Hydraulic Pipe , Dost Idoler , Dost Injector Nozzle Bs-Iv , Dost Injector Nozzle Coupler , Dost Injector Nozzle Service , Dost Injector Pump Servicing , Dost Inner Handle Taan , Dost Jack Tube Polish , Dost Jointer 08 No. , Dost Jointer 10 No. , Dost Kamani Pin , Dost Kamani Tikli , Dost Kamani U Clamp I Bolt , Dost Kingpin Unit , Dost Lath Work , Dost Lift Motor Field Bolt Soldering , Dost Lift Switch Box , Dost Liner Slu , Dost Makkhi Woisher , Dost Master Cylinder Kit Major , Dost Master Cylinder Repairing , Dost New Accelerator Paddle , Dost New Altinator , Dost Nozzle Hosepipe , Dost Nozzle Overflow Pipe ( Lockwali ) , Dost Nozzle Return Overflow Pipe , Dost Nut 12 No. , Dost Oil Chamber , Dost Oil Chamber Packing , Dost Oil Cooler Body Bs-Iv , Dost Oil Guage Inner , Dost Oil Guage Outer , Dost Oil Hose Pipe , Dost Oil Jaali , Dost Oil Pressure Switch , Dost Oil Pump Jaali , Dost Oil Seal Set , Dost Oil Separator , Dost Outer Handle Taan , Dost Packing Kit , Dost Power Steering Pipe , Dost Power Steering Rack , Dost Pressure Plate Bs-Iv , Dost Propeller Shaft Nut Bolt 14 No. , Dost Propeller Shaft Repairing ( Pipe Change ) , Dost Pump Solenoid Switch Coupler , Dost Radiator Cap , Dost Radiator Fan Repairing , Dost Radiator Hose Pipe , Dost Release Bearing Bs-Iv , Dost Release Bearing Lock , Dost Retueb Tee ( Fip Tee ) , Dost Rfa Rear Axle Assy ( 4.1 ) , Dost Shaft Cross , Dost Shaft Teeth Welding , Dost Side Plate ( Oil Plate ) Packing , Dost Side Plate ( Oil Plate ) Bolt 1 , Dost Silencer Pipe With Jali , Dost Silencer Rubber ( Gutke ) , Dost Silicon Tube Black , Dost Solenoid Screw , Dost Spendal Nut , Dost Spendal Thread Making , Dost Spider Kit Opening Fitting , Dost Steering Coupling , Dost Steering Coupling Assy. , Dost Steering Cross Assy. , Dost Steering Cross Rod , Dost Steering Pipe Repairing , Dost Steering Rack , Dost Steering Rack Assy , Dost Steering Rack Boot , Dost Steering Rack Boot Clip Set , Dost Steering Rack Kit , Dost Steering Rack Repairing , Dost Steering Transmission Box Assy. , Dost Steering Yoke Rod , Dost Tank Repairing , Dost Tapit Bottle , Dost Tapit Coin , Dost Tapit Cover Packing , Dost Tapit Katori , Dost Temperature Tee , Dost Tikli Round , Dost Timing Gear , Dost Tmc Valve , Dost Top Plate , Dost Tube 165R14 , Dost Tube 185 D / 14 , Dost Tube 185R14 , Dost Tube Polish , Dost Turbo Main Oil Pipe , Dost Turbo Repairing , Dost Turbo Servicing , Dost Uj Cross , Dost Valve Cap , Dost Valve Catcher , Dost Wheel Bolt With Nut Rear , Dost Wheel Hub Rear , Dost Wiper Blade , Dost Woisher 18 No. , Dowel - Dia 10 X 37 Long , Dowelspring Dia 13.5 L10 , Dowelspring Dia15 L16 , Dowel Dia 1022 Long , Dowel Dia 8 18Long , Dowel Dia4 , Dowel Hollow , Dowel Target Wheel6mm , Dowelinjector Dia 8X10 Long , Dowell Hollow.Rr Hsg. / Int.Hsg , Dowell Pin Cl.Hsg / G.B Hsg Assy , Drift - Ctr Shaft Frt & Rr End Brg , Drift Air Breather - Gb - Dost , Drift -Diff Cage Side Bearing , Drift For Cam Brg In The Housing , Drift For Exhaust Valve Seat , Drift For Front Cover Oil Seal , Drift For Front Hub Grease Seal , Drift For Inlet Valve Seat , Drift For Rear Cover Oil Seal , Drift For Upper Link Bushing , Drift For Valve Guide , Drift Main Sft Frt End Inter Brg , Drift Pinion Inner Brg Race ( Frt ) , Drift Pinion Oil Seal , Drift Pinion Outer Bearing Race ( Rr ) , Drift-Inner Bearing Race ( Hub ) , Drift-Main Shaft Rr End Brg , Drift-Outboard Oil Seal , Drift-Outer Bearing Race ( Hub ) , Drift-Pinion Inner Bearing , Drive Belt Alternator And Pow , Drive Beltac Compressor , Drive Head Flange Puller , Drum-Rr Brake , Ecu ( Delphi ) , Egr Cooler Assembly , Egr Pipe1van , Egr Pipe4 , Egr Plate , Egr Valve Assy , Emblem-Fr , End Plate For P15 Starter Motor , Engaging Gear, 1St / 2Nd , Engaging Gear, 3Rd / 4Th , O / P Sft , Engine Assembly P15 Bs4 Spd Bom , Engine Mounting Bracketlh / Rh , Escut-Door Lock Knob , Escut-Inside Handle , Exhaust Manifold , Exhaust Manifoldbs3 , Fan Motor Assly - Non Ac , Feed Pipe Assy - Long , Feed Pipe Assy - Short , Fill Plug , Fin Assy-Fr Door, Lh / Rh , Fin-Fr Door Corner, Lh / Rh , Fip Cam Roller For P15 , First Gear O / P Sft , Fitment Tool , Flgdiff Brgcone ( Timken / Koyo ) , Flgext Diff Brg Cup ( Timken / Koyo ) , Fr Leaf No : 1 , Fr Leaf No : 1 Rfs , Fr Leaf No : 2 , Fr Leaf No : 2 Rfs , Fr Panel Assy-Corner, Lh / Rh , Fr Panel Assy-Ctr , Fr Spr Liner - Rfs , Fr Susp Rr-Brkt Assy , Fr Tip Insert Rfs , Frame Assy – Lwb 13+D Power Strng , Frame Assy # Lwb Ambu Power Strng , Fuel Control Unit , Fuel Feed - All Types , Fuel Filter , Fuel Filter Element For P15 - Bosch , Fuel Level Sen , Fuel Level Sen - Bosch , Fuel Pumpimv , Fuel Tank Assembly , Gaskettc Oil Drain Flange , Gasket Coolant Inlet Body , Gasket Cylinder Head , Gasket Exhaust Manifold , Gasket-Oil Pump , Gearpinion Mate & Side Net Form , Gearsidenet Form , Gear & Pinion Assy , Gear ;Rev. Idler , Gear Asm;2Nd Main , Gear Asm;3Rd Main Sft , Gear Asm;5Th Main Sft , Gear Asm;Low, With Synchro , Gear Assy-Ps , Gear Assy-Strg , Gear Assy-Transfer, Strg , Gear Box Assy ( Rsb ) , Gear Box Hsg , Gear Cable , Gear Set ( 4.44 Ratio ) , Gear Set, Ring And Pinion , Gear Train Holding Fixture , Gear, Diff Pinion ( Mach ) , Gear, Diff Side ( Mach ) , Gear; Speedo Drv , Gear;5Th, Ctnr , Gear;Ctnr , Rev , Gear;Rev, Main Sft , Glass-Back Wdw , Glass-Fr Door, Lh / Rh , Glass-Wind Shield , Grip-Asst , Grmt-Inst Pin , Handle Assy-Fr Door Inside , Handle Assy-Fr Door Outside, Lh / Rh , Handle-Jack , Handle-Pull , Hose - Pipe All Type , Hp Pump , Hp-Pipe 1&2 Rail To Injector , Hp-Pipe 3 Rail To Injector , Hp-Pipe Pump To Rail Bosch , Injector , Injector Clamp , Injector Dummy - Dost Bosch System , Inlet Manifold , Lever Assy-Brake Pedal , Lever Assy-Clutch Pedal , Lid - Resvr Brake Fluid , Main Bearing , O Ring Fip , O Ring Speedo Pinion Hsg , Obj Assy , Oil Collector , Oil Cooler With Oring , Oil Filler Cap , Oil Filterspin On Type , Oil Seal , P15 Enginelong Block , Pedal Stopper , Pilot Bearing , Pilot Bearing Puller , Pinall Types And Objrvt. , Pinion Oil Seal , Pin-Link Bush , Pin-Rr Spr, Rr , Pin-Snap 8 , Pipeegr Coolant Inlet , Pipe Assy-Compl , Pipe Compl Cooler, High , Pipe Flangedcoolant Inlet To , Pipe Oil Reciever , Pipe1-Common Rail To Injector , Pipe2-Common Rail To Injector , Pipe3 Egr , Pipe3-Common Rail To Injector , Pipe-Egr Cooler Return Hose To T Connec , Pipe-Pump To Common Rail - Vave , Pipe-Pump To Common Rail ( Imv Pump ) , Pipe-Rad, Lwr , Pipe-Second, Between Brake Boo , Pipetc Oil Drain , Pipetc Oil Inlet , Piston , Piston Ring Set , Plug-All Type And Size , Power Socket Assy , Power Steering Pump , Pre Fuel Filter - Dost , Pressure Cap Big , Pressure Cap Small , Pressure Plate , Protr Tube , Protr-Eng Cover , Protr-Harn , Psp-Bracket Top , Puller -Diff Cage Side Brg-Lh&Rh , Puller For Axle Shaft Bearing , Puller-Front Pinion Bearing , Pulleypower Steering Pump , Q Box Assy ; Cbl Shift , Rad Assy , Rail Assy-Eng Cover , Rcb Mntg Brkt , Rear Adaptor Housing Avtechge , Rear Adaptor Housing Zomaxgea , Rear Body Fender Set , Rear Combination Lamp- Rh , Rear Housing Oil Seal Installer Assly , Rear Oil Seal Pressing , Reflector Assy-Fr Side , Relay Drop Arm , Relay Housing , Relay Shaft Machined , Relay-Ems Ecu Feed , Relay-Rad Fan , Relay-Rad Fan - 50Amps , Release Bearing , Remover - Brush Holder Assembly , Rep Kit For Synchro - Rsb , Rep Kit T / M O / H , Resistor - Blower , Resistor - Radshroud , Resvr-Brake Fluid , Ret Assy Oil Seal , Retainer Wheel Bearing Inner - New , Retainer Whl Brg Inr , Retainer, Diff Pinion Shaft , Reverse Idler Gear Sft , Reverse Indicator Sw , Ring Gear For P15 Flyweel , Ring Gear Scr , Ring Gear Stopper , Ring Snap All Types And Size , Ring, Retaining , Rivet- Blind, Rd Hd, Pull 3.2X4 , Rocker Sftmachined - Al 307T , Rod Assy-Bat Cover , Rod Assy-Rad Mtg, Lh / Rh , Rod Assy-Relay , Rod Assy-Tie, Lh / Rh , Rod-Bat Fix , Rod-Compr, Fr Susp , Rod-Fr Door Handle, Lh / Rh , Roller Brg Pilot , Roller Brg, C / S Fr , Roller Brg, C / S Rr , Roller Tappet , Rotory Link Assy - Wiper , Rrcvr Assy , Rr Leaf No : 1 , Rr Leaf No : 1 Rfs , Rr Leaf No : 2 , Rr Leaf No : 2 Rfs , Rr Spr Liner - Rfs , Rub Pad , Rubber-Pedal Stopper , S / A Of Flywheel And Ring Gear , S / A Of Piston , S / A Of Water Pump , S / A Pipe Vacuum Pump Oil , S / A Piston Cooling Nozzle ( Assy ) , Sacrank Shaft With Crank Ge , Sa Arm , Sa Bracket - Idler , Sa Connecting Rod , Sa Dipstick Guide With Bracke , Sa Egr Valve Wo Feedback , Sa Of Camshaftbosch Fie , Sa Of Camshaft Dtvs , Sa Of Catalytic Convertercc , Sa Of Cover Cylinder Head , Sa Of Oil Pump , Sa Of Pipevsv To Egr Valve , Sa Of Pipe Vaccum Pump Oil In From Block , Sa Of Strainer , Sa Of Sump With Drain Plug , Sa Of Tensioner For Alternato , Sa Of Turbocharger , Sa Rev Sleeve Yoke , Sa Rev Sleeve Yoke ( Rsb ) , Sales Kit , Second Gear Assembly O / P Sft , Self Armature Make Comstar , Self Bendex Make Comstar , Self Body Make Comstar , Self Brush Plate Make Comstar , Self Egt Complete Make Comstar , Self Hosing Make Comstar , Self Katora Make Comstar , Self Lock Nut Flanged M8x125 , Self Solonoid Switch Make Comstar , Sens Assy Speed , Sensor Hfm , Serv Kit Inboard Seal , Serv Kit, Axle Shaft Each Side , Serv Kit, Bearing ( Axle Shaft ) , Serv Kit, Diff Case , Serv Kit, Ring And Pinion , Serv Kit, Seal ( Outboard ) , Serv Kit, Seal ( Pinion Seal ) , Serv Kit, Thrust Washer , Setting Block Pinion Height , Setting Dummy - Pinion Ht , Setting Tool Pinion Height , Sftdiff Std , Sftflg Axle Fin , Sft ;Rev Idle , Sft Assy- Prop , Shackle Assy-Rr Spr, Rr , Shackle-Plate, Rr Spr Rr , Shaft, Axle ( Mach ) , Shaft, Diff Pinion , Shift Arm Rev , Shift Arm;Low-2Nd , Shift Arm;Rev-5Th , Shift Arm;Top-3Rd , Shift Blk Assy , Shift Blk-Clutch , Shift Fork , Shift Fork;With Spr , Shift Rod Rev , Shift Rod;Low-2Nd , Shift Rod;Top-3Rd , Shifter Dog 1St / 2Nd , Shifter Dog, Reverse & 5Th Gear , Shifter Fork 1St / 2Nd , Shifter Fork 3Rd / 4Th , Shifter Fork, 5Th , Shifter Sft 1St / 2Nd , Shifter Sft 3Rd / 4Th , Shifter Sft Reverse Gear , Shifter Sft, 5Th , Shifter Sleeve 1St / 2Nd , Shifter Sleeve 3Rd / 4Th O / P Sft , Shifter Sleeve, 5Th Counter Gear , Shiftershoe, Reverse Bracket , Sho Adj-Cover , Shroud - No Loss Tank , Shroud Assy , Shroud Assy-W / Motor Fan , Side Glass Lh / Rh , Skirt Panel For Fuel Tank Guard , Sleevehub Asm;Top-3Rd , Sleeve & Hub Asm;Rev-5Th , Sleeve & Hub Assy Low 2Nd , Sliding Glass Assy-Back Wdw , Socassy- Lh ( Tra ) / Rh , Socassy- Rh ( Dla ) , Socket For Pcn Assembly , Socket Screw M6x1x30 , Spacer - Clamp , Spacer, 5Th C / S , Spacer, Pinion Bearing , Spacer-Tube , Spcr- Pinion Brg , Spcrrocker Sft ( W&R ) , Spcr ;Brg Drv Gear , Spcr Pinion Brg , Spd Long Block For P15 58Ps W , Spdl Assy-Knu, Lh / Rh , Speedo Gear O / P Sft , Speedo Pinion , Speedo Pinion Hsg , Spindl-Upr Link , Splash Guard-Fr Wh , Sprpin Assy; Shift Arm , Sprpin;Inr , Sprpin;Otr , Spr ;Blk To Fork , Spr ;Detent Ball , Spr ;Fork To Supt , Spr Assy-Fr , Spr Assy-Rr , Spr Pin-Check L B2 , Spr Ret, Withdrawal Lever , Spr Wa;Rrcvr , Spreader On Carrier , Spring Dowel Removal Chisel , Starter Motor , Stfnr Assy-Fr Bmpr , Stfnr-Door Lock, Rh , Stiffenerlh / Rh , Strap-Asst Seat , Striker Assy-Door , Striker-Glove Box Lid , Sunvisor Assy-Lh / Rh , Supt ;Clutch Fork Clutch , Supt Assy-Bat, Fr , Supt Assy-Engmtg, Lh / Rh , Supt-Rub, Fr Spr Lh / Rh , Swassy ;Rev Lamp , Sw Assy-Clutch , Sw Assy-Door Lock Cyl, Rh , Sw Assy-H / L Level , Sw Assy-Ign , Sw Comp-Comb , Swing Lever, Reverse Gear , Sync Cone 1St / 2Nd Gear , Sync Cone 3Rd / 4Th / 5Th C Gear O / P Sft , Sync Ring, 5Th Counter Gear , Tank Assy-Fuel , Tank Assy-Ps , Tank Assy-Rad Resvr , Tank Assy-Wash , Tank Compl-Fuel , Tank Compl-Rad Resvr , Tank Compl-Rad Resvr With No Loss Tank , Tensioner Gauge ( U508 Sonic Tester ) , Thermistor - Blower , Thermostat , Thermostat 88 Deg , Thermostat Exp Val - Blower , Third Gear Assembly O / P Sft , Threaded Insert , Thrust All Type And Size , Thrust Wshr H 8.3 , Timing Belt , T-Map Sensor , Top Bush-Rub Shock Abs, Rfs , Top Gear Sftwith Synchro , Touch Idler Pulleytiming Belt , Trans Assy , Transmission Case & Plate Im , Triangle - Warning , Tube Asm, Breather , Tube-Vac, Brake Booster , Turbo Outlet Pipe , Turbo Pipe Bracket , Upr  Col  Assy , Vaccuum Pump - P15 Alternator , Vacuum Modulator , Vacuum Solenoid Valve Vsv , Valveexhaust , Valve Assy-Load Sensing , Valve Inlet , Valve Oil Seal Drift , Valve Split Cone , Valve Spring Compressor , Valve Spring Inner , Valve Spring Outer , Valve Stem Seal ( Nok ) , Valve-Air , Vent Assy-Side, Lh / Rh , Vent Conzole , Venturi , Vibration Damper Pulley , Water In Fuel Sensor , Welt-Body Side, Fr , Wheel Assy-Disc , Wheel Assy-Strg , Wheel Bearing Carrier , Wheel Cap - Dost , Wheel End Shim All Type And Size , Whl Cyl Assy , Wiping System Assy , Wire-Bonding, Res , Wrench-Wheel Nut , Wstrip - Back Wdw , Wstrip Assy-Fr Door, Lh , Wstrip Assy-Fr Door, Rh , Wstrip-Back Wdw , Wstrip-Body Side, Lh / Rh , Wstrip-Ws , Yoke Cmpt Sliding , Yoke Cmpt  Cross Joint Flg , 5. Mahindra Maxximo2.5 Clip , Accl Pedal Assy , Adaptor Oil Filling , Air Filter Element , Air Filter Hosepipe , Allen Key Bolt ( Hub ) , Arm Bolt , Assembly Leak Off Pipe , Assembly Water Pump , Assy Connecting Rod - 2 Cyl. Eagle , Assy Fan And Shroud , Assy Fuel Tank , Assy Hose Radiator Outlet , Assy Hose Vac Reservior To Tmc , Assy Latch Tailgate , Assy Lower Control Arm Rh , Assy Oil Sump- 2 Cyl. Eagle , Assy Piston Cooling Jet , Assy Synchro Pack 5Th Mpv , Assy Vacuum Pump-2 Cyl. Eagle , Axel , Axel Bearing , Axel Bearing Opening Fitting , Axel Lock , Axel Slu , Axle Bearing , Axle Katora , Axle Repairing , Ball Bearing 6205.2Rsr.C3 , Ball Brg 5Th Support 61903.2Rsr.C3 Mpv , Ball Joint , Ball Joint Assembly , Ball Joint Lh / Rh , Beading Windsheild , Bearing Clutch Release , Bleeder Screw , Block Repairing , Bolt Banjo , Bolt Mass Balancer Cap , Bracket Oil Seperator Na Bs-Iv , Brake Disc , Brake Liner Lock , Brake Liner Spring Kit , Brake Pipe ( 3 Ft Long ) , Brake Pipe ( No.10 & 11 ) 2Ft. , Breather Assy , Brush Holder Complete , Bush Shock Absorber , Bush Silent Block , Cable Parking Brake Rear Lh / Rh , Cage Body Grinding , Cage Body Repairing , Caliper Assy Front Lh / Rh , Cam Coupler , Cam Sensor , Camshaft Intake , Center Bolt 3 Soot 4 , Center Bolt 6 ( 17 No. Nut ) , Center Pin , Circlip Int - Lug 47X1.75Xph , Clutch Cable Assy , Clutch Fark Bush , Clutch Plate , Clutch Release Bearing , Combination Lamp Rear Lh / Rh , Combination Switch , Common Rail , Common Rail Coupler , Commonrail Servicing , Completeclutchassy , Cone , Connecting Bush , Control Housing Cable Shift Ltv , Coolent Bottom Hose , Corss Holder , Counter Shaft 5 Speed , Cr Bush , Crank Repairing , Crank Sensor , Crankshaft Machined - 2 Cyl. Eagle , Crdi Pipe , Cross Mbr Degas Tank , Crown Bearing , Crown Lock Patti , Crown Pinion , Crown Pinion Repairing , Crown Thali Bolt , Degassing Tank , Dgbb 35*72 2Rsr 6207 Ltv Whl End Brg , Dgbb Bearing Carrier Ltv , Dgbb Bearing Carrier Mpv , Diesel Filter Body , Diesel Filter Element , Diesel Main Pipe , Diesel Motor Assy. Machine , Diesel Return Banjo Type , Diesel Return Pipe , Diesel Tank Cap , Diesel Tank Fuel Pump Assembly ( Diesel Motor Assy. ) , Diff Bevel Forged Pinion Mate 9T Ltv , Door Glass ( Rhs ) , Door Glass Catcher , Door Glass Handle , Door Glass Machine ( Lhs ) , Door Lock Screw , Drag Link Assy Steering , Ecu , Ecu Flushing , Egr Valve , Engine Cross Member Bush , Engine Foundation , Engine Foundation Thhiya , Engine Isolator , Engine Mounting , Engine Mounting Thhiya , Engine Servicing , Engine Wiring Harness , Etainer Housing Front Brg Ltv , F.I.P. Pump , Fabric Trim Pad Frt Door Lh / Rh , Fan Belt , Fan Motor , Fark Lever , Fip Pump , Fip Servicing , Fixed Guide - 2 Cyl. Eagle , Flip Pump , Flywheel Bearing , Flywheel Bearing 6000 , Front Caliper Assy Lh / Rh , Front Main Glass Fitting , Fuel Feed Pump W / O Fls , Fuel Filter Cartridge , Fuel Level Sensor Assy. , Fullyoke Complete , Gasket Cylinder Head- 2 Cyl. Eagle , Gasket Exhaust Manifold - Catcon , Gaskit , Gear Chilam , Gear Danda , Gear Dog Kit , Gear Foundation , Gear Lever Assy. Complete , Gear Rod Assy , Gear Shifter Cable Sys Assy , Gear Shifter Slu ( 2Nd-3Rd ) , Gear Tapa , Glass Tailgate , Grill-Front Bumper , Guide Dip Stick - 2 Cyl. Eagle , Half Yog , Head Repairing , Head Seat , Head Servicing , Headlight ( Lhs ) , Heater Tubes Assy Heater Side , Hla , Horn Pad Steering Wheel , Hose Air Filter Outlet , Hose Air Vent , Hose Assy Blow-By , Hose Assy Front Brake , Hose Egr Cooler Water Outlet , Hose Engine Out To Thermostat In , Hose Inlet Egr Side , Hose Moulded Clean Side , Hose Oil Sep. Drain Na Bs-Iv , Hose Oil Seperator , Hose Oil Seperator Drain , Hose Outlet Engine Side , Hose Radiator Outlet , Hose Thermostat To Radiator Inlet , Hose Vac Pump To Reservior , Hosepipe , Hosing Bearing , Housing Bearing , Hub , Hub Bearing , Hub Bearing Fitting , Hydraulic Jack Tee ( Adoptor ) , Hydraulic Motor Assy , Hydraulic Pipe , Hydraulic Tank Bolt , Hydraulic Tank Me Hole Karana , Hydraulic Tank Motor Repairing , Idler Box Assy , Injector Coupler , Injector Nozzle Servicing , Instrument Cluster Maxximo Obdii , Intermediate Shaft Assembly , Joint Patti , Kamanipatte 38 , Kamani A No. Patta , Kamani B No. Patta , Kamani Bush , Kamani Bush ( Shockup ) Dhol Type , Kamani Tikli Thick , Kit Con Rod Bearing ( Begin Bearing ) , Kit Front Caliper -Major , Kit Latch Assy Frt Door Lh / Rh , Kit Mass Balancer , Kit Pad Assy Disc Brake , Kit Pigtail And Fuel Filter Assy , Kit Pigtail Coolant Temp Sensor , Kit Pigtail Pressure Control Valv , Kit Pigtail Vehicle Speed Sensor , Kit Pigtail Wtr In Fuel Sensor , Kit Piston Pin N Rings Os 0.2 , Kit Ring Set Piston , Kit Ring Set Piston O / S 0.3 , Kit Service Degass Tank Bsiii , Kit Sliding Pin , Kitlatchassyfrtdoorrh , Kitpigtailvehiclespeedsensor , Latch Assy Rr Sliding Door Lh / Rh , Lift Coil , Lift Motor Brush , Lift Motor Field Bolt , Lift Motor Field Bolt Soldering , Lift Motor Field Coil Repairing , Lift Motor Repairing , Lined Kit ( Kbx 495 ) , Liner Slu , Lip Oil Seal , Lower Control Arm Comp Rh , Lsp Valve , M Nm Pad Kit Number , Main Bearing , Main Oil Seal , Major Kit - Tmc , Mass Balancer Bearing Front-2 Cyl. Eagle , Mass Balancer Bearing Rear -2 Cyl. Eagle , Mass Balancer Shaft - Na , Mesh-Grille Radiator Rh , Mirror-Rear View Inside , Mirror-Rear View Outer Lh / Rh , Needle Roller Brg 30X35x27 , Nef-Oil Seperator , Nipple Drain Hose , Non Return Pipe , Non Return Valve , Nozzle Assy, Piston Cooling , Nozzle Overflow Pipe , Oil Filter , Oil Guage , Oil Guage Pipe , Oil Jet , Oil Pressure Switch Mhawk2 , Oil Seal ( Maximo Axel Oil Seal ) , Oil Seal-Transm.Frt.Brg.Ret. , Oil Separator Assy , O-Ring Vacuum Pump , Overflow Pipe , Packing Kit , Pad Kit , Pad Spring , Park Brake Lever Assy , Parking Brake Cable Frt , Parking Brake Cable Rr , Parking Brake Frnt Cable Mpv , Parking Brake Lever Assy Mpv , Pinion Bearing , Pinion Bearing Small , Pinion Shim , Pinion Slu , Pinionoilsealltv , Pipe Cylinder Head Water Outlet , Pipe Degassing , Pipe High Pressure Pump To Rail , Pipe Water Pump Inlet , Pipe Water Pump Inlet-Tc , Popular Shaft , Popular Shaft Nut Bolt , Pressure Plate , Push Rod , Push Rod Arm ( Lhs+Rhs ) , Radiator Assembly , Rear Axle Semifloat Shaft Ltv , Rear Brake Drum Ltv , Rear Combination Lamp Lh / Rh , Rear Kamani Tikli , Rear Shock Absorber , Rev Idler Gear Assy Ltv , Ring Gear Flywheel - Two Cyl , Ring High Speed Synchronizer , Select Cable Assy , Shift Cable Assy Ltv , Shock Absorber Assy Rear , Shockup Front ( Rhs ) , Shoe Return Spring Lower , Shoe Return Spring Upper , Side Bearing , Silencer Jaali , Sliding Roller Assy Lwr Rr Dr Lh / Rh , Sliding Roller Assy Mid Rr Dr Lh / Rh , Sliding Roller Assy Upr Rr Dr Lh , Snap Ring Ltv , Solenoid Screw Bosch , Spindle , Square U Clamp 7 , Star Chowkdi Pin , Star Washer , Steering Arm Lhs , Steering Box Nut Bolt With Woisher 5 16 No. , Steering Box Nutbolt With Woisher 13 No. , Steering Coloumn Complete , Steering Cross Assy. , Steering Gear Assy , Steering Gear Assy With Out Drag , Steering Patti , Steering Pump , Steering Rack , Steering Rod , Strut Assy Complete Lh / Rh , Strut Body Assy , Strut Mtg.Brkt. , Strutassemblycomplete , Suspension Arm , Suspension Arm Bolt 17 No. 4 , Synchro Assy 3 N4 , Tandem Master Assly , Tapit Cover Me Tuta Bolt Nikalna , Tensioner Arm - 2 Cyl. Eagle , Thermostat Assy Na Engine , Thrust Woisher , Tie Rod End , Timing Chain , Timing Gear ( Big ) , Timing Gear ( Small ) , Timing Oil Seal , Timing Tensioner , Top Mount Assy Moulded Lh / Rh , Top Mount Assy Moulded Rh , Tube Whl Cyl Rear Rh , Uj Cross , Uj Kit_1130 , Valve Intake- Lxcrdi , Valve Oil Seal , Valve Sheet , Water Benjo Pipe , Water Pump Assembly , Weel Cylinder Assy Lh / Rh , Wheel Bearing Fitting , Wheel Bolt , Wheel Hub Assy , Wheel Hub Bearing Lock , Wheel Hub Oil Seal , Wheel Nut , Wheel Rim 4J X R12-55Mm Offset , Windshield Glass , Wiper Blade And Arm Assy Co-Dr / S , Wiper Blade Assy , Wire Harness Alternator And Start , Wiring Harness Chassis , Wiring Harness Engine , Wiring Harness Front , 6. Mahindra Jeepaccelator Panja Complite Make Napco , Accelator Wire Cable Make Napco , Accelator Wire Ka Bolt Make Napco , Accelator Wire Make Napco , Air Filtermake Lumax , Axel Bearing 25821 Rear Make Nbc , Axel Chabi Make Super , Axle Makkhi Woisher Front Make Super , Axle Nut Front Make Lokesh , Axle Rearmake Axlo , Back Door Glassmake Lacto , Back Door Glass Rubber Chennal Makehylex , Back Door Lock With Handle Makeanshu , Bail Cranckroller Bearing Make Nrb , Bail Cranck Assy Make Main , Body Mounting ( Foundation ) Make Vicas , Bonut Clip With Nut Bolt Make Napco , Bonut Ghutke Make Napco , Bonut Hook Clip ( 4 Nos ) Make Napco , Brake Bottle Thread Wali Make Tvs , Brake Liner & Rivit Front Make Tvs , Brake Liner & Rivit Rear Make Tvs , Brake Liner Spring Make Tvs , Brake Oil Dabbi Se Master Cylinder Tak Ka Pipe ( 6 Ft. ) ( Rubber Ka ) Make Eyelex , Brake Paddle Bracket Bush Make Napco , Brake Paddle Bracket Make Napco , Brake Pipe Left Front Make Tvs , Brake Pipe Rear Left Make Tvs , Brake Pipe Rear Right Make L.M.S , Brake Pipe Right Front Make Tvs , Brake Thali Nut Bolt Make Tvs , Break Liner Spring Make Tvs , Chasis Aade Bolt Make Tvs , Chasis Cross Member Foundation Make Vicas , Check Nut Make Tvs , Chock Wire Make Pricol , Clutch Aaye Bolt Make Tvs , Clutch Fark Make Napco , Clutch Paddle & Brake Paddle Ghutke Make N.P.R , Clutch Paddle Namda Kit Make Nepco , Clutch Paddle Pin Make Balcon , Clutch Patti Make Kpi , Clutch Pipe Make Napco , Clutch Plate Assy Make Mahindra , Clutch Plate Facing Make Ca , Clutch Release Bearing Make Rane , Clutch Release Bearing Spring Nepco , Clutch Release Hub Make Lokesh , Clutch Rod Make Lokesh , Clutch Stud Bolt Make Nepco , Clutch Taan Lever Make Lokesh , Diesel Filter Make Purolat , Diesel Overflow Pipe ( Nozzle ) Make Mico , Diesel Tank Dhakkan + Lock Make Ashu , Diesel Tank Hose Pipe Make Npr , Diesel Tank Patti Make Npr , Diesel Tank Rubber Make Npr , Differentiol Crown Adjusting Bolt Assy. Make Tvs , Differentiol Crown Cage Bearing Skf , Differentiol Crown Pinion Bearing Make Skf , Differentiol Crown Spider Kit Make Gajra , Differentiol Crown Wheel & Pinion Make Gajra , Differentiol Pinion Flanch Mahindra , Differentiol Pinion Oil Seal Make Pioneer , Differentiol Pinion Pilot Bearing Makeskf , Disel Nali Make Sak , Disel Tank Complite Make Nepco , Disel Tank Hose Pipe Make N.P.R , Engine Begin Bearing Make Kirloskar , Engine Block Makr Mahindra , Engine Cam Shaft Make Mahindra , Engine Connecting Rod Bush Make Kirloskar , Engine Connecting Rod Makebharat , Engine Crank Grinding, Polish , Engine Crank Make Mahindra , Engine Cylinder Liner Make Power , Engine Foundation Front Make Vicas , Engine Foundation Rear Make Vicas , Engine Half Gaskit Make Victor , Engine Head Guide, Headseat Opening Fitting And Griding Facing , Engine Head Make Mahindra , Engine Head Seat Make Grandles , Engine Kem Bush Make Kirloskar , Engine Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Engine Liner Rubber Ring Make Tvs , Engine Liner Sleeve Make Tiger , Engine Main Bearing Make Kirloskar , Engine Oil Body Voisher Make Nepco , Engine Oil Chamber Packing Make Nepco , Engine Oil Filter Paper Wala Make Elofik , Engine Oil Filter Pijo Make Elofik , Engine Oil Filter Ring Make Npr , Engine Oil Filter Steel Wala Elofik , Engine Oil Gage Withouter Make Nepco , Engine Oil Meter Pipe Make Tosy , Engine Oil Pump Assy. Make Mahindra , Engine Oil Pump Gear Make Mahindra , Engine Oil Seal Kit Make Nepco , Engine Packing Kit Make Victor , Engine Piston Ring Make Ipl , Engine Piston With Pin & Surclip Make Ipl , Engine Tapit Cover Packing Make Victor , Engine Tapit Cover Zonga Ka Pipe Make Nepco , Engine Tapit Cover Zonga Make Nepco , Engine Water Pumphub Make Nepco , Engine Water Pump Assy. & Packing Make Mahindra , Fan Belt Make Fanner , Front Main Glassmake Atul , Front Main Glass Rubber Channel Make Lecto , Fry Wheel Bush Make Msp , Fry Wheel Ring Make Bharat , Fuel Pump Meter Make Bharat , Gear 1St Dog Kit Make Mahindra , Gear 3Rd 5 Gear Wala Make Gajra , Gear Box Changer Shaft Make Balcon , Gear Box Chilam Oil Seal Make Chairman , Gear Box Fork Make Main , Gear Box Milometer Gear Make Napco , Gear Box Oil Retainer Make Lokesh , Gear Box Oil Seal Make Pioneer , Gear Box Packing Make Victor , Gear Box Taape Packing Make Victor , Gear Changer Sleeve Make Gajra , Gear Counter Gear Big 5 Gear Wala Make Gajra , Gear Counter Gear Small 5 Gear Wala Make Gajra , Gear Counter Shaft Make Gajra , Gear Foundation Make Vicas , Gear Hosing Bolt Make Tvs , Gear Lever Make Main , Gear Lever Top Cover Assy. 3 Gear Wala Make Main , Gear Lock Make Nepco , Gear Main Shaft 3 Gear Make Gajra , Gear Main Shaft Bearing Make Skf , Gear Main Shaft Pilot Bearing Make Skf , Gear Saconizer Ring With Hubmake Gajara , Gear Shaft Reverse Make Gajra , Gear Synchronising Ring Top & Third Make Gajra , Gear Synchronizing Assy. Complete Make Gajra , Gear Tapa Assy Complete Make Main , Gear Tapa Bolt Make Tvs , Gear Top Dog Kit Make Mahindra , Gear Top Shaft 3 Gear Make Mahindra , Gear Top Shaft 5 Gear Make Gajara , Gear Top Shaft Bearing Make Skf , Gear Top Shaft Roller Make Nrb , Injectornozzle Copper Woisher Make Mico , Injector Full Gaskit Make Victor , Injector Nozzle Over All Kit Make Mico , Injector Nozzle Pipe Make Mico , Injector Pump Over All Kit Make Mico , Jeep Pijo540 Clutch Taan , Jeep Pijo540 Clutch Taan Hundi , Jeep Pijo540 Diesel Tank Cap , Jeep Pijo540 Diesel Tank Hose Piajo , Jeep Pijo540 Radiator Cap , Jeep Pijo540 Silencer Manifold Stud , Jeep Pijo540 Silencer Packing , Jeep Pijo540 Stud Removing In Silencer , Jeepthar Block Lathe Work , Jeepthar Crank Repainring , Jeepthar Engine Connecting Rod Bush , Jeepthar Engine Foundation Frt , Jeepthar Engine Liner Rubber Ring , Jeepthar Engine Oil Pump Assy. , Jeepthar Main Bearing , Jeepthar Thrust Woisher , Jeepthar Wiper Machine , Kamani Aade Bolt Make Tvs , Kamani Bracket Front Make Napco , Kamani Bracket Rear Make Napco , Kamani Bush Front Make Napco , Kamani Bush Rear Make Napco , Kamani Center Bolt Front Make Lokesh , Kamani Center Bolt Rear Make Lokesh , Kamani Jhula Front Make Napco , Kamani Jhula Rear Make Napco , Kamani Katter Pin Make Napco , Kamani Patta Badane Wala Make Jaivijay , Kamani Patta Clip Wala Front Makejaivijay , Kamani Patta Main Front Make Jaivijay , Kamani Patta Main Rear Makejaivijay , Kamani Patta Second Front ( Mada ) Jaivijay , Kamani Patta Second Rear ( Mada ) Jaivijay , Kamani Pin Front Make Super , Kamani Pin Rear Make Lokesh , Kamani Rubber Bush Make Super , Kamani Thiya Front Make Napco , Kamani Thiya Rear Make Super , Kamani U Clamp Front Make Super , Kamani U Clamp Rear Make Napco , Kin Pin Bottam Plate Make Napco , King Pin Bearing Make Mahindra , King Pin Bush Make Mahindra , King Pin Set Make Mahindra , King Pin Shim 4 Hole Make Napco , King Pin Spandlemake Kafila , King Pin Thrust Bearing Make Lms , Main Shaft [ Mahindra Ki ] Make Gajara , Master Cylinder Double Piston Make Tvs , Milometer Chain Make Pricol , Milometer Gear Make Mahindra , Milometer Valve With Holder Make Napco , Mjeep 1St Gear , Mjeep 1St Gear ( Di ) , Mjeep 3Rd Gear ( Di ) , Mjeep 4 Gate Curtain Making , Mjeep Accelerator Paddle Rubber , Mjeep Accelerator Return Spring ( Pump ) Di , Mjeep Air Cleaner Hose , Mjeep Air Filter , Mjeep Balance Rod , Mjeep Balance Rod Bolt , Mjeep Balance Rod Clamp , Mjeep Balance Rod Gutke , Mjeep Bearing ( 11 Charre ) , Mjeep Bearing Sheet , Mjeep Bonut Hook Kit , Mjeep Bonut Hook Nut Bolt 10 No. , Mjeep Brake Booster Kit , Mjeep Brake Booster Repairing , Mjeep Brake Caliper Kit , Mjeep Brake Caliper Repairing , Mjeep Brake Disc , Mjeep Brake Disc Me Cut Lagwana , Mjeep Brake Liner Lock Kit , Mjeep Brake Master Cylinder , Mjeep Brake Master Cylinder Me Kit Fitting , Mjeep Brake Pad , Mjeep Brake Paddle Bush Fitting , Mjeep Brake Paddle Namda Kit , Mjeep Brake Paddle Pin , Mjeep Brake Paddle Rubber , Mjeep Brake Pipe , Mjeep Brake Shoe , Mjeep Brake Thali , Mjeep Brake Thali Polish Cut , Mjeep Bush Fitting , Mjeep Cage Body Opening Fitting , Mjeep Cage Body Repairing , Mjeep Center Bolt 3 3 Soot , Mjeep Center Bolt 4 , Mjeep Central Mirror ( Thar ) , Mjeep Central Mirror Screw ( Thar ) , Mjeep Charre , Mjeep Chokdi Pin , Mjeep Clamp Patti ( Thar ) , Mjeep Clutch Cylinder Lower , Mjeep Clutch Cylinder Pipe , Mjeep Clutch Cylinder Upper , Mjeep Clutch Fark Spring , Mjeep Clutch Kit Lower , Mjeep Clutch Kit Upper , Mjeep Clutch Paddle Return Spring , Mjeep Clutch Paddle Rubber , Mjeep Clutch Pin ( Thar ) , Mjeep Clutch Taan Bolt , Mjeep Clutch Valve Joint , Mjeep Coolent Bottle , Mjeep Counter , Mjeep Counter Bearing ( Di ) , Mjeep Counter Gear Charre , Mjeep Counter Shaft Ki Sheem , Mjeep Counter Shim Woisher , Mjeep Cr Bearing 10 No. , Mjeep Crank Side Brass , Mjeep Crank Side Brass Welding & Turning , Mjeep Crown Pinion Bearing , Mjeep Diesel Filter , Mjeep Diesel Main Pipe , Mjeep Diesel Tank Dhakkan ( Thar ) , Mjeep Diesel Tank Hose Pipe Clip , Mjeep Differential Lock Patti , Mjeep Differential Packing , Mjeep Differential Woisher , Mjeep Door Glass , Mjeep Door Inner Handle ( Lhs ) , Mjeep Door Lock Rhs , Mjeep Door Lock Screw , Mjeep Door Outer Handle , Mjeep Double Benjo Pipe 8 Ft 19X19 , Mjeep Drum Polish , Mjeep E.G.T. Bearing , Mjeep Engine Foundation Nut Bolt ( Di ) , Mjeep Engine Foundation Thhiya , Mjeep Engine Oil Filter , Mjeep Engine Servicing , Mjeep Feed Pump , Mjeep File 2 Flat , Mjeep Fitting Rubber Screw & Cut Woisher , Mjeep Foot Valve 4 , Mjeep Front Brake Hose , Mjeep Front Kamani 3 No Patta , Mjeep Front Kamani Clip 2.5 , Mjeep Front Kamani Clip 3 , Mjeep Front Kamani Patta 28 , Mjeep Front Kamani Patta 33.5 , Mjeep Front Kamani Rear Mouth Bush , Mjeep Front Main Glass , Mjeep Front Main Glass Fitting , Mjeep Gear Danda Lattu , Mjeep Gear Tapa Kit , Mjeep Gear Tapa Repairing , Mjeep Glass Frame Fitting Hook Set , Mjeep Glass Frame Lower Hitting Rubber , Mjeep Glass Sliding Handle , Mjeep Glass Velvet Channel , Mjeep Grease Gun ( Di ) , Mjeep Hand Brake Cable , Mjeep Head Bolt , Mjeep Head Gaskit , Mjeep Head Guide , Mjeep Head Se Nozzle Nikalna , Mjeep Head Seat ( Thar ) , Mjeep Head Servicing , Mjeep Head Valve , Mjeep Head Valve Spring , Mjeep Hood Repairing , Mjeep Hose Pipe ( Di ) , Mjeep Hub Bearing Front ( Thar ) , Mjeep Hub Oil Seal Front ( Thar ) , Mjeep Injector Nozzle ( Di ) , Mjeep Injector Nozzle Servicing , Mjeep Injector Nozzle Woisher , Mjeep Injector Pump Servicing , Mjeep Kamani Clip 1.5 , Mjeep Kamani Clip 2 , Mjeep Kamani Tikdi , Mjeep Kangan Bearing , Mjeep Kin Pin Gutke , Mjeep King Pin Bolt 14 No. , Mjeep Liner , Mjeep Liner Cutting & New Fitting , Mjeep Liner Fitting , Mjeep Lock Kit , Mjeep Lock Shaft , Mjeep Lower Clutch Pipe , Mjeep Main Line Boring , Mjeep Main Oil Seal , Mjeep Main Shaft Lock ( Di ) , Mjeep Master Cylinderkit Major , Mjeep Master Cylinder Kit Fitting , Mjeep Master Cylinder Kit Major , Mjeep Nakal Bolt 13 No. , Mjeep Nakal Bolt 14 No. , Mjeep New Seat Making , Mjeep Nozzle Pipe 02 No. , Mjeep Oil Chamber ( Di ) , Mjeep Oil Filter , Mjeep Oil Switch , Mjeep Packing Kit , Mjeep Pijo540 Engine Foundation With Nut Bolt , Mjeep Pijo540 Fuel Motor , Mjeep Pinion Nut , Mjeep Pinion Packing , Mjeep Pinion Sim , Mjeep Pipe Jointer ( 10Mm ) , Mjeep Piston Ring , Mjeep Popup Knob , Mjeep Pressure Plate , Mjeep Radiator Hose Pipe , Mjeep Rc Lock , Mjeep Rear Brake Patti With Bulb , Mjeep Rear Gear Plate , Mjeep Rear Kamani Front Mouth Bush , Mjeep Rear Kamani Patta 32 Tikdi , Mjeep Rear Kamani Patta 44 , Mjeep Rear Kamani Rear Mouth Bush , Mjeep Release Bearing , Mjeep Return Valve , Mjeep Reverse Big Gear , Mjeep Reverse Small Gear , Mjeep Rocker Stud With Nut , Mjeep Seat Cover Making , Mjeep Seat Repairing , Mjeep Self Bendex , Mjeep Side Glass ( Lhs ) , Mjeep Silencer Nut Bolt 13 No , Mjeep Silencer Patti , Mjeep Silencer Rubber , Mjeep Steering Bearing , Mjeep Steering Box Assy. ( Thar ) , Mjeep Steering Box Nut Bolt Big , Mjeep Steering Box Nut Bolt Small , Mjeep Steering Box Repairing , Mjeep Steering Box Stat Removing , Mjeep Steering Box Thhiye Bolt Removing , Mjeep Steering Bush , Mjeep Steering Cross , Mjeep Steering Oil , Mjeep Steering Oil Seal , Mjeep Steering Sheem , Mjeep Survey Cylinder Kit Major , Mjeep Survey Me Kit Fitting , Mjeep Tailgate Lock , Mjeep Tailgate Lock Thessi Knob , Mjeep Tailgate Outer Handle , Mjeep Tailgate Thessi , Mjeep Tapit Cover Ki Ring , Mjeep Thali Bolt Dalana , Mjeep Thali Bolt Nikalana , Mjeep Thar Di Clutch Plate , Mjeep Thar Di Fuel Pump Motor , Mjeep Thar Shockup Front , Mjeep Thhiye Ke Bolt , Mjeep Tie Rod End , Mjeep Timing Oil Seal , Mjeep Tube Repairing , Mjeep Turbo , Mjeep Tyrod Complete , Mjeep U Clamp , Mjeep U Clamp Plate , Mjeep Vaccume Pipe ( Thar ) , Mjeep Valve Catcher , Mjeep Valve Oil Seal , Mjeep Verm Rod , Mjeep Water Body Assy , Mjeep Water Pump , Mjeep Wheel Cap ( Di ) , Mjeep Wheel Disc ( Thar ) , Mjeep Wiper Blade , Mjeep Wiper Motor Patti ( Round ) , Mjeep Woisher , Mjeep Woisher Plan , Mjeep Woisher Spring , Mounting Bolt Kit Make Tvs , Mudguard Rubber Make Durga , Nakal Ka Cock Make Napco , Nakal Left Side Make Super , Nuckle Kit Make Napco , Paddle Namda Kit Make Napco , Pressure Plate Assy. Make Mahindra , Pressure Plate Bolt 13 No. Make Tvs , Pressure Plate Reapir Kit Make Napco , Propelloru.Clamp [ U.J.Cross Ka ] Make Napco , Propellor Shaft Cross Holder Make Rds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Half Yog Make Rds , Propellor Shaft Nut Bolt Make Tvs , Propellor Shaft Teeth Front Make Rds , Propellor Shaft Teeth Rear Make Rds , Propellor Shaft U J Cross Make Rds , Propellor Sllveyoke Assy Make Kafila , Push Rod Complete Make Balcon , Push Rod Repair Kit Make Balcon , Radiator Fan Make Napco , Radiator Foundation Make Rawart , Radiator Hose Pipe Clip Make Wikman , Radiator Hose Pipe Radiator ( Lower ) Make Npr , Radiator Hose Pipe Radiator ( Upper ) Make Npr , Shock Up Bush Make Gabriel , Shockup Front Make Gabriel , Shockup Rear Make Gabriel , Side Door Glass Make Davi , Side Door Glass Mechine Make Karan , Side Door Glass Rubber Channel Make Lacto , Silencer Assy. Complete Make Himos , Silencer Clip With Bolt Nut Make Napco , Silencer Kothi Ke Ghutke Make Npr , Silencer Kothi Make Hemos , Silencer Manifold Pipe Make Hemos , Silencer Packing Make Napco , Silencer Pipe Make Hemos , Silencer Tail Pipe Make Hemos , Steering Bearing Make Delux , Steering Box Assembly Complete Make Main , Steering Bush Make Napco , Steering Cross Assy. Make Main , Steering Oil Seal Make Pioneer , Steering Packing Make Napco , Steering Rod Make Main , Steering Sector Shaft Make Main , Steering Verm Assy. Make Main , Steering Wheel Make Lacto , Stop Wire Complete Make Napco , Tie Rod Assy Make Karan , Tie Rod End Kit Make Kaffila , Tie Rod End Make Kaffila , Wheel Alignment , Wheel Bearing Big Front Make Skf , Wheel Bearing Big Rear Make Skf , Wheel Bearing Small Front Make Skf , Wheel Bearing Small Rear Make Skf , Wheel Cylinder Assy. Front Make Tvs , Wheel Cylinder Assy. Rear Make Tvs , Wheel Cylinder Kit Front Make Tvs , Wheel Cylinder Kit Rear Make Tvs , Wheel Disc Front Make Godrej , Wheel Disc Rear Make Godrej , Wheel Lock Woisher Front Make Napco , Wheel Nut Bolt Front Make Tvs , Wheel Nut Bolt Rear Make Tvs , Wheel Oil Seal Front Make Pioneer , Wheel Oil Seal Rear Make Pioneer , Wheel Tube Gulla Check Nut Make Tvs , Whell Hub Rear Make Super , 7. Tata 1210 1210 1 / 2 13 No. Nut Bolt , 1210 13 No. Spring Woisher , 1210 1St Gear Changer Lever , 1210 Alternator Taan , 1210 Axle Me Kangani Fit Karna , 1210 Bearing Lock 13 No. , 1210 Bearing Lock 2209 , 1210 Bend 6 , 1210 Block Se Tuta Bolt Nikalna & Thread Banana , 1210 Brake Alter Patti , 1210 Brake Liner Opening Fitting , 1210 Brake Paddle , 1210 Brake Paddle Pin Bush Fitting , 1210 Brake Valve Mechine Me Kit Fitting , 1210 Brass Material Filling In Block , 1210 Cage Body Repairing , 1210 Center Bearing Lock , 1210 Center Bearing Opening Fitting , 1210 Center Bearing Sturd , 1210 Clutch Paddle , 1210 Clutch Plate Facing ( Dhagewali ) Gb40 , 1210 Clutch Plate Facing Fitting , 1210 Counter Gear Ki Chaabi , 1210 Counter Gear Ki Lock , 1210 Counter Gear Opening Fitting Gb30 , 1210 Counter Gear Tightling , 1210 Counter Key , 1210 Counter Lock , 1210 Counter Opening Fitting , 1210 Counter Shaft Rear Fitting , 1210 Cr Bush Fitting , 1210 Ddu Machine Kit Fitting , 1210 Dhadi Ke Muh Me Maal Bharkar Turning Karna , 1210 Dhadi Repairing , 1210 Differential Handi Me Thread Banana , 1210 Differential Oil Drain Cock , 1210 Differential Pilot Bearing Lock Big , 1210 Differential Pilot Bearing Lock Small , 1210 Differential Tube Ke Gulle Me Thread Making , 1210 Double Benjo Pipe 84 , 1210 Drum Cut Polish , 1210 Fark Lever , 1210 Fevi Bond , 1210 Field Bolt Soldering , 1210 First Second Liver Complete , 1210 Flyweel Hole Drilling , 1210 Flywhell Cut Polish , 1210 Full Engine Servicing , 1210 Gear Changer Lever , 1210 Gear Cover Packing ( Tv1 ) , 1210 Gear Danda Kit , 1210 Gear Tapa Fitting , 1210 Gear Tapa Repairing , 1210 Gear Woisher , 1210 Glass Fitting , 1210 Gulla Shim No. 19 , 1210 Half Yoke Opening Fitting , 1210 Hub Bearing Fitting , 1210 Hub Bolt Fitting , 1210 Hub Ka Lock Katora Fitting , 1210 Hub Katora 13 No. Bearing , 1210 Hub Katora Lock , 1210 Hub Me Kangani Fit Karna , 1210 Injector Nozzle Servicing , 1210 Injector Pump Servicing , 1210 Intercooler Hosepipe , 1210 Kamani Clip 14 , 1210 Kamani Ke Thhiye K Chasis Me Hole Karna , 1210 Kit Fitting In Master Cylinder , 1210 Liner Fitting , 1210 Liner Gulli Lock , 1210 Liner Nails 13 No. Nut , 1210 Lock Katori , 1210 Master Cylinder Repairing , 1210 Nut Bolt 17 No. 1 , 1210 Oil Filter Packing , 1210 Oil Filter Ring Brass , 1210 Oil Pump Assy. With Jaali , 1210 Oil Pump Jaali , 1210 Patti Par Maal Lagana , 1210 Popular Shaft 1 / 2 Decreasing , 1210 Popular Shaft Pipe 1.5 Increasing , 1210 Popular Shaft Rear Teeth Nut , 1210 Pressure Platecut Polish , 1210 Pully Bush , 1210 Radiator Fitting Nut Bolt , 1210 Rear Brake Cam , 1210 Rear Teeth Opening Fitting , 1210 Reverse Fank Bansi , 1210 Reverse Gear Changer Lever , 1210 Reverse Gear Lock , 1210 Roof Repairing , 1210 Seat Cover Fitting , 1210 Seat Cover Making & Fitting , 1210 Seat Cushing , 1210 Seat Repairing , 1210 Silencer Packing 3 Hole , 1210 Spring Woisher Packet , 1210 Steering Adjusting Bolt , 1210 Steering Box , 1210 Steering Check Nut 32 No. , 1210 Steering Check Nut Lock , 1210 Steering Cross Bolt , 1210 Steering Uj Corss Bolt , 1210 Stud , 1210 Survey Bracket , 1210 Tapit Cover Ring , 1210 Third Top Liver Complete , 1210 Thread Lock , 1210 Twin Gear , 1210 Twin Gear Opening Fitting , 1210 U Clamp 13 ( No. 270 ) , 1210 Valve 4 , 1210 Water Pump Major Kit Fitting , 1210 Weight Bolt , 1210 Weight Bolt Removing , 1210 Wheel Steering Lp1210 , 1210 Woisher 27 No. , A.C.Piece Make Mpr , A.C.Ring Make Goetzs , Accelarator Panja Make Gmi , Accelator End Make Airo , Accelator Rod Make R.P.W , Accelator Spring Make Olma , Accelator Tan Small Make Olma , Accelerator Taan S-Model Make Olma , Air Cleaner Assy Make Airo , Air Cleaner Clip Lower Side With Threadairo , Air Cleaner Rubber Make Rider , Air Cleaner Slu Rubber Small Rider , Air Clener 1612 Make Airo , Air Clener Clip 1612 Make Airo , Air Clener Hose 1612 Make Rider , Air Compressure Head Make Tvs , Air Compressure Kit Complite Make Tvs , Air Compressure Oilseal Make Rider , Air Filter Assy Make Mico , Air Meter Pressure Piperandeep , Air Pressure Meter Make Pricol , Air Pressure Pipe 84 Pvc Make Randeep , Air Pressure Pipe Make Randeep , Air Pressure Tank Bracket Pattitelco , Air Tank Brackat Make Telco , Air Tank Clip Make Hd , Air Tank Filter Machine Make Tvs , Air Tank Make Telco , Air Tank Pipe Steel Make Randeep , Air Tank Rubber Make Rider , Air Tank Valve Brass Make Tvs , Air Tee Make Olma , Air Went Screw Make Olma , Alter Bolt Kit Make Olma , Ampere Meter Make Pricol , Arm Nut Bolt Make Tvs , Axle Make Gajara , Axle Packing 6 Hole & 8 Hole Make Banco , Axle Plate 6 Hole & 8 Hole Make Olma , Axle Plate Bolt Make Tvs , Axle Rod Make Olma , Banjo Bolt Master Cylindermico , Benjo Tee Make Olma , Benjo Woisher Make Olma , Bharti Voisher Make Olma , Bonut Gutka Make Rider , Brake Alter Bolt Make Tvs , Brake Blading Screw Make Olma , Brake Bottle Pipe Make Randeep , Brake Cam Bush Make Tvs , Brake Drum Front Make Telco , Brake Hose Front Make Tvs , Brake Hose Pipe Rubber Make Tvs , Brake Hose Rear Make Tvs , Brake Kit 3 / 49 Unloader Valve Kittvs , Brake Liner Front With Rivit Tvs , Brake Liner Gulli Make Olma , Brake Liner Gutke Make Olma , Brake Liner Lock Make Olma , Brake Liner Patti Make Olma , Brake Liner Rear With Rivittvs , Brake Liner Spring Make Airo , Brake Lock Katori Make Olma , Brake M C Kit 6334 Make Tvs , Brake Master Cylinder Kit ( Double Tendum ) Tvs , Brake Master Cylinder Kit 57 No.Tvs , Brake Master Cylinder Make Tvs , Brake Master Cylinder Tee Make Tvs , Brake Oil Bottle Make Olma , Brake Oil Dabbi Of Master Cylinderolma , Brake Pipe ( Master Cylinder ) Steelrandeep , Brake Pipe Front Steel Make Randeep , Brake Pipe Steel Rear Make Randeep , Brake Shoe Front Make Tvs , Brake Shoe Rear Make Tvs , Brake Spring Front Make Olma , Brake Survey Kit 5 / 3 Make Tvs , Brake Survey Machine Complete Assy. Make Tvs , Brake Survey Piston Kit 2 / 24Tvs , Brake Survey Piston Kit Complete 2 / 21Tvs , Brake Survey Repair Kit 2 / 10Tvs , Brake Tee Make Airo , Brake Thali Nut Bolt Make Tvs , Brake Thali Rear Make Tata , Brake Unloader Valve Machine New Model Make Tvs , Brake Unloder Valve Machine 3 / 49Tvs , Break Drum 8 Hole 50 N0. Reartelco , Break Kem Rear Make Telco , Break Paddle Bush Make Delta , Break Paddle Pin Make Delta , Break Pipe Steel Double Banjo Randeep , Breake Bottle Make Olma , Breake Drum Front Make Telco , Breake Kit Master Cylinder 5 / 3Tvs , Breake Kit Survey 6902 Make Tvs , Breake M C Kit Double Tendum 6496Tvs , Breake Master Cylinderkit Major Make Tvs , Breake Master Cylinder Assembly Double Tendumtvs , Breake Pipe 144 N0. Make Randeep , Breake Pressure Pipe Make Randeep , Breake Servotee Make Tvs , Breake Servo Booster Assytvs , Breake Servo Kit Major Make Tvs , Breake Sleeve Make Olma , Breake Thali Complite Make Telco , Bumper Ke Nut Bolt Make Tvs , Chasis Cross Member Foundation Rider , Chasis Cross Member Kaanm Brand , Chasis Cross Member Nut Bolttvs , Clutch & Brake Padel Bushdelta , Clutch Fark Cone Make Olma , Clutch Fark Lever Bearing Make Olma , Clutch Fark Lever Make Olma , Clutch Fark Make Olma , Clutch Fark Patti Make Olma , Clutch Finger Kit ( 4 ) Finger ( 40 ) Ca , Clutch Finger Kit 3 Finger 30 Make Ca , Clutch Hosing 40 Make Gajra , Clutch Hosing Bolt Make Tvs , Clutch Hosing Gb 30 Make Gajara , Clutch Hub Gb 30 Make Rds , Clutch Hub Gb 40 Make Rds , Clutch Paddle Rubber Make Rider , Clutch Padel Pin Make Delta , Clutch Pin Make Delta , Clutch Plateka Fencing 40 Rane / Ca , Clutch Plate 30 Make Rane / Ca , Clutch Plate 40 Make Rane / Ca , Clutch Plate Fencing 30 Makerane / Ca , Clutch Release Bearing 1888180 Make Skf , Clutch Rod Make Olma , Clutch Tan Long Make Olma , Dash Board Rubber Ghutke Front [ Cabin ] Rider , Dash Board Rubber Ghutke Rear [ Cabin ] Rider , Dash Board Thhiya Make M Brand , Deshboard Nut Bolt Make Tvs , Diesel Connection Pipe Make Rider , Diesel Filter 1.1 Lit. Make Mico , Diesel Filter Bowl Make Mico , Diesel Filter Plate Make Mico , Diesel Filter Thhia Make R.P.W , Diesel Return Pipe [ Main ] Make Randeep , Diesel Return Pipe Ironrandeep , Diesel Tank Jali With Nut Make Airo , Diesel Tank Patti Make H.D , Diesel Tank With All Fittiting Completetelco , Differential Cover Jamshedpurtelco , Differentiol Cage Body Bolttvs , Differentiol Crown Adjusting Bolt Tikditvs , Differentiol Crown And Pinion Make Gajra , Differentiol Crown Bearing ( 32213 ) Skf , Differentiol Crown Bewal Woisher Make Airo , Differentiol Crown Cage Bodytelco , Differentiol Crown Make Gajara , Differentiol Crown Packing Make Banco , Differentiol Crown Side Bearin 47487Skf , Differentiol Crown Side Check Nuttvs , Differentiol Crown Spider Kit Complete Make Star , Differentiol Crown Star Woisher Std Make Airo ( 1210 Differentiol Crown Star Woisher ) , Differentiol Crown Stud + Nuttvs , Differentiol Crown Thali Bolttvs , Differentiol Pilot Bearingskf , Differentiol Pinion Bearingskf , Differentiol Pinion Check Nut Big Make Tvs ( 1210 Differentiol Pinion Check Nut Big ) , Differentiol Pinion Crown Kagajara , Differentiol Pinion Diston Slur.P.W , Differentiol Pinion Flanch Make Rds , Differentiol Pinion Flanch Woisherolma , Differentiol Pinion Jalebi Woisherairo , Differentiol Pinion Nut Make Gs , Differentiol Pinion Oil Sealrider , Disel Tank Cock Make R.P.W , Disel Tank Dhakkan Compliter.P.W , Disel Tank Rubber Make Rider , Disk Repairing 9.00X20 / 10.00X20 , Door Glass Mechine Make Ci , Door Lock + Handle With Key Make Ci , Double Banjo Pipe 10 Feet Longrider , Double Banjo Pipe 30 Longrider , Double Benjo Pipe 144 Inch Stee Longrider , Double Benjo Pipe 18 Inch Long Rider , Double Benjo Pipe 24 Inch Make Rider , Double Benjo Pipe 36 Inch Make Rider , Double Benjo Pipe 48 Inch Make Rider , Double Benjo Pipe 60 Inch Make Rider , Double Benjo Pipe 72 Inch Make Rider , Dumper Pad Make Rider , Dumper Pad Nut Bolt Make Tvs , Engine Begin Bearing Make Kirloskar , Engine Block Make Telco , Engine Cam Shaft Make Telco , Engine Chamber Bolt No.10 Make Tvs , Engine Chamber Make Telco , Engine Chamber Packing Make Banco , Engine Connectingrod Bolt Make Tvs , Engine Connecting Bearing Platetelco , Engine Connecting Rod Bushbanara , Engine Connecting Rod Make Telco , Engine Crank Bearing 6204 Make Skf , Engine Crank Make Telco , Engine Crankcrank Grinding, Polish , Engine Cylinder Liner ( Sleeve ) Tiger , Engine Foundation Bolt Front No.22 With Washertvs , Engine Foundation Bolt Rear No.19 With Washertvs , Engine Foundation Front Make Rider , Engine Foundation Rear Make Rider , Engine Foundation Thhiya Make Metro , Engine Free Chamber Make Banco , Engine Free Chamber Ring Make Banco , Engine Gaskit Full Make Benko , Engine Gaskit Half Make Benko , Engine Head Guide, Headseat Opening Fitting And Griding , Engine Head Make Telco , Engine Head Seat Make Evl , Engine Head State Make Tvs , Engine Head Valve Guide Make Evl , Engine Head Valve Make Evl , Engine Head Washer Make Airo , Engine Helper Ring Make Mpr , Engine Kaan Nut Bolt Make Tvs , Engine Kaan With Nut Bolt Make Tvs , Engine Kem Bush Make Kirlosker , Engine Kem Tickli Aluminiummpr , Engine Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting , Engine Main Bearing Make Banara , Engine Main Oil Seal Make Pioneer , Engine Nagin Pipe Make Randeep , Engine Oilmeter Pipe Make Randeep , Engine Oil Chamber Nut & Bolt Make Tvs , Engine Oil Filter Make Mico , Engine Oil Gauge + Outer Make Olma , Engine Oil Gauge Make R.P.W , Engine Oil Jhonga Pipe Make Rider , Engine Oil Pipe Steel Make Randeep , Engine Oil Pump Gear Make Telco , Engine Oil Pump Valve Make Telco , Engine Oil Seal 1312 Make Pioneer , Engine Oil Zonga Make R.P.W , Engine Piston Make Mpr , Engine Piston Ring Make Mpr , Engine Pully Bush Make R.P.W , Engine Pully Make R.P.W , Engine Rocker Bush Make Mpr , Engine Rocker Shaft ( Baasuri ) Mpr , Engine Tapit Cover Dhakkan Make R.P.W , Engine Tapit Cover Make Telco , Engine Tapit Cover Packingbanco , Engine Tapit Screw Make Airo , Engine Thrust Voisher Make Banara , Engine Timer Gear Big Make Telco , Engine Timer Gear Bolt Make Tvs , Engine Timer Gear Small Make Telco , Engine Timer Kit Make Telco , Engine Timing Oil Seal Make Rider , Engine Water Jacket Pipe Tee Olma , Engine Water Pump Assy. Make Indosuri , Engine Water Pump Bearing Make Skf , Engine Water Pump Hub Make Olma , Engine Water Pump Kit Majorindosuri , Engine Water Pump Major With Bearingindosuri , Engine Water Pump Packing Make Banco , Engine Water Pump Packing Pistol Shape Banco , Engine Water Pump Pipe Make Olma , Engine Water Pump Pulley Make Tata , Engine Water Pump Stud & Nuttvs , Engineoil Meter Make Pricol , Fan Belt No.571 Make Fenner , Fly Whell Assy 40 Make Telco , Front Main Glass With Rubber Channel Fittingatul , Front Wind Sheld Glass Lptatul , Front Wind Sheld Glass Lptrubber Chanelalp , Front Wind Sheld Glass Se Make Atul , Front Wind Sheld Glass Se Rubber Chanelalp , Fry Wheel Assembly Make Telco , Fry Wheel Bearing Make Skf , Fry Wheel Bolt Make Tvs , Fry Wheel Ring 30 Make Gajra , Fry Wheel Ring 40 Make Gajra , Fuel Pump Valve Kit Make Mico , Gear Bansuri Top 3Rd Make Gajra , Gear Batik Ring Make R.P.W , Gear Bearing 32207 Counter Make Skf , Gear Bearing Nu 209 Make Skf , Gear Bearing Nu 309 Make Skf , Gear Bearing Nu2209 Make Skf , Gear Bearing Qj 209 Make Skf , Gear Bearing Qj 309 Make Skf , Gear Box Bolt Make Tvs , Gear Box Chilam Gb 30 Make Delta , Gear Box Chilam Gb 40 Make Delta , Gear Box Oil Seal Make Rider , Gear Box Packing 40 Make Banco , Gear Box Packing Gb 30 Make Banco , Gear Butter Ring Gb 30 Make R.P.W , Gear Butter Ring Gb 40 Make R.P.W , Gear Changer Kangni 30 Make Gajra , Gear Changer Kangni 40 Make Gajra , Gear Changer Plate 30 Big Make Telco , Gear Changer Plate 30 Small Telco , Gear Changer Plate 40 Big Maketelco , Gear Chawal Charra Makenrb , Gear Chharra Spring Maker.P.W , Gear Chilam Bolt Make T.V.S. , Gear Chilam Oil Seal Make Rider , Gear Chilam Ring Make R.P.W , Gear Coller Bush Make R.P.W , Gear Counter Shaft Gb 30 Make Gajra , Gear Counter Shaft Gb 40 Make Gajra , Gear Counter Shaft Shim Thick Make R.P.W , Gear Counter Shaft Shim Thin Make R.P.W , Gear Danda 30 Make Telco , Gear Danda 40 Make Telco , Gear Danda Katora Gb 30 Makeolma , Gear Danda Katora Gb 40 Make Olma , Gear Danda Lattu Make Olma , Gear Danda Makkhi Gb 40 Make Airo , Gear Danda Spring Gb 30 Make Airo , Gear Danda Spring Gb 40 Make Airo , Gear Dande Ki Makkhi 30Make Airo , Gear Dog Kit Gb 30 Make T.V.S. , Gear Dog Kit Gb 40 Make T.V.S. , Gear Double Big Gb 30 Make Gajra , Gear Double Big Gb 40 Makegajra , Gear Double Small Gb 30 Make Gajra , Gear Double Small Gb 40 Make Gajra , Gear Engag. Second Third Gear Gb 30 Make Gajra , Gear Engaging Fourth Fifth Gear Gb 30 Makegajra , Gear Engaging Fourth Fifth Gear Gb 40Gajra , Gear Engaging Second Third Gear Gb 40 Gajra , Gear First Gb 30 Make Gajra , Gear First Gb 40 Make Gajra , Gear First Kangni 30 Make Gajra , Gear First Kangni 40 Make Gajra , Gear Flanch Gb 30 Make Rds , Gear Flanch Gb 40 Make Rds , Gear Fourth Gb 30 Make Gajara , Gear Fourth Gb 40 Make Gajara , Gear Fourth Slu Gb 30 Makegajara , Gear Fourth Slu Gb 40 Make Gajara , Gear Hose / Handi Gb 30 Makegajara , Gear Hose / Handi Gb 40 Make Gajara , Gear Hosing Bolt Maketvs , Gear Kangan Bearing Double Jali40 Make Deluxe , Gear Kangan Bearing Double Jali 30 Skf , Gear Kangan Bearing Gb 30 Make Skf , Gear Kangan Bearing Gb 40 Make Skf , Gear Kangan Bearing Slu 30 Makegajra , Gear Kangan Bearing Slu 40 Gajra , Gear Lever Gb 30 Make Telco , Gear Lever Gb 40 Make Telco , Gear Main Shaft Gb 30 Make Gajra , Gear Main Shaft Gb 40 Make Gajra , Gear Main Shaft Nut 30Make Tvs , Gear Main Shaft Nut Gb 40 Make Tvs , Gear Main Shaft Pilot Bearing 30 Make Skf , Gear Main Shaft Pilot Bearing 40 Make Skf , Gear Main Shaft Sheem Woisher 30 & 40 Make R.P.W ( Main Shaft Shim ) , Gear Packing Kit 1612 Makebanco , Gear Packing Kit Danda Showbanco , Gear Plate Milometer Gear30 Gajra , Gear Plate Milometer Gear40gajra , Gear Reverse Bearing Gb 30 Make Skf , Gear Reverse Bearing Gb 40 Make Skf , Gear Reverse Gb 30 Make Gajra , Gear Reverse Gb 40 Make Gajra , Gear Reverse Idoler Gb 30 Make Gajra , Gear Reverse Idoler Gb 40 Make Gajra , Gear Reverse Pin 30 Make Gajra , Gear Reverse Pin 40 Make Gajra , Gear Second Gb 30 Make Gajra , Gear Second Gb 40 Make Gajra , Gear Second Slu Gb 30 Make Gajra , Gear Second Slu Gb 40 Make Gajara , Gear Synchronising Ring 30 Make Gajra , Gear Synchronising Ring 40Gajra , Gear Tapa Boltgb 40 Make Tvs , Gear Tapa Bolt 30 Make Tvs , Gear Tapa Gb 30 Make Telco , Gear Tapa Gb 40 Make Telco , Gear Tapa Kit Gb 30 Make Gajra , Gear Tapa Kit Gb 40 Make Gajara , Gear Tapa Lever + Bansuri 30Gajara , Gear Tapa Lever + Bansuri 40Gajara , Gear Tapa Spring Gb 30 Make Olma , Gear Tapa Spring Gb 40 Make Olma , Gear Third Gb 30 Make Gajra , Gear Third Gb 40 Make Gajra , Gear Top Kangani Gb 30 Make Gajra , Gear Top Kangani Gb 40 Make Gajra , Gear Top Shaft Gb 30 Make Gajra , Gear Top Shaft Gb 40 Make Gajra , Gear Top Shaft Nut 30 Make Rana , Gear Top Shaft Nut 40 Make Rane , Gulla Sheem 13 No. Make R.P.W , Gulla Sheem 16No. Make R.P.W , Injectornozzle Over All Kitmico , Injector Diesel Connection Pipe Make Randeep , Injector Fuel Pump Assy. Make Mico , Injector Hand Primer Make Mico , Injector Nozzle Woisher Make Mico , Injector Pump Over All Kitmico , Injector Pump Pipe Mico Make Mico , Kamani Aade Bolt Make Tvs , Kamani Bush Front Make Gs , Kamani Bush Rear Gs Make Gs , Kamani Center Bolt 10 Make Gs , Kamani Center Bolt 12 Make Gs , Kamani Center Bolt 14 Make Gs , Kamani Center Bolt 16 Make Gs , Kamani Center Bolt 6 Make Gs , Kamani Center Bolt 7 Make Gs , Kamani Clip 4 Inch Make Heavy Duty , Kamani Clip 5 Inch Make Heavy Duty , Kamani Clip 6 Inch Make Heavy Duty , Kamani Clip Small 7 Inchheavy Duty , Kamani Clip Small 8Inchheavy Duty , Kamani Clip Small 9 Inchheavy Duty , Kamani Clip Small Make Heavy Duty , Kamani Hanger Bolt & Nut Make Tvs , Kamani Helper Palang / Khatiyags , Kamani Helper Thhiye Rear Make Gs , Kamani Jhula Front Make Gs , Kamani Jhula Rear Make Gs , Kamani Katter Bolt Make Tvs , Kamani Katter Patti Make Heavy Duty , Kamani Pattab No Helper Make Gs , Kamani Patta 3 No. Front Make Gs , Kamani Patta 3 No. Rear Make Gs , Kamani Patta 4 No. Front Make Gs , Kamani Patta 4 No. Rear Make Gs , Kamani Patta 5 No. Front Make Gs , Kamani Patta 5 No. Rear Make Gs , Kamani Patta 6 No. Front Make Gs , Kamani Patta 6 No. Rear Make Gs , Kamani Patta A No Helper Make Gs , Kamani Patta A No. Front Make Gs , Kamani Patta A No. Rear Make Gs , Kamani Patta B No. Front Make Gs , Kamani Patta B No. Rear Make Gs , Kamani Patta Mada Front Make Gs , Kamani Patta Mada Rear Make Gs , Kamani Patta Main Front Make Gs , Kamani Patta Main Helper Make Gs , Kamani Patta Main Rear Make Gs , Kamani Pin Front Make Gs , Kamani Pin Rear Make Gs , Kamani Repeat Make R.P.W , Kamani Tapper Patti Frontr.P.W , Kamani Thhiya Front Make Gs , Kamani Thhiya Rear Make Gs , Kamani U Clamp 10 Inch Make Gs , Kamani U Clamp 10 Make Gs , Kamani U Clamp 12 Inch Make Gs , Kamani U Clamp 14 Inch Make Gs , Kamani U Clamp 15 Inch Make Gs , Kamani U Clamp 16 Inch Make Gs , Kamani U Clamp 17 Inch Make Gs , Kamani U Clamp 18 Inch Make Gs , Kamani U Clamp 19 Inch Make Gs , Kamani U Clamp 20Inch Make Gs , Kamani U Clamp 22Inch Make Gs , Kamani U Clamp 23 Inch Make Gs , Kamani U Clamp 8 Inch Make Gs , Kamani U Clamp 9 Inch Make Gs , Kamani U Clamp Thhiya Make Gs , Kamani U Clamp Woisher Make R.P.W , Kamani Woisher Make R.P.W , King Pin Bearing Make Srmt , King Pin Bush Make Srmt , King Pin Complete Set Make Srmt , King Pin Lock Kit Make Srmt , Kit 25 / 8 Make Tvs , Kit 3 / 65 Make Tvs , Kit 6 / 8 Make Tvs , Milometer Chain ( Rod ) Make Pricol , Milometer Gear Make Pricol , Over Flow Banjo Bolt Make Mico , Over Flow Return Valve Make Mico , Pressure Pipe Make Tvs , Pressure Plate Bolt Make Tvs , Pressure Plate Cover 30 Make Ca , Pressure Plate Cover 40 Make Ca , Pressure Plate Gb 30 Make Ca , Pressure Plate Gb 40 Make Ca , Pressure Plate Spring Gb 30 Make Ca , Pressure Plate Spring Gb 40 Make Ca , Pressure Plate Tawa Gb 30 Make Ca , Pressure Plate Tawa Gb 40 Make Ca , Propel.Shaft Cent Bearing Complete 6208 Skf , Propeller Shaft Center Bearing Flanch Rds , Propeller Shaft Center Bearing Rubber All Sizerider , Propeller Shaft Center Bearing Rubber Cut Walarider , Propeller Shaft Centre Bearing 1612Skf , Propeller Shaft Centre Bearing Flanch 1612Rds , Propeller Shaft Centre Bearing Nut 1612Tvs , Propeller Shaft Full Yoke 1612Rds , Propeller Shaft Full Yoke Assy 1612Rds , Propeller Shaft Rear Teeth 1612Rds , Propeller Shaft Sleeve Yoke Assyrds , Propeller Shaft U.J.Cross 1612Rds , Propellor Shaft Center Bearing Coner.P.W , Propellor Shaft Center Bearing Thhiye Nut Bolttvs , Propellor Shaft Centre Bearing Nutgs , Propellor Shaft Centre Bearing Oil Sealrider , Propellor Shaft Centre Bearing Teethrds , Propellor Shaft Centre Bearing Thhiyer.P.W , Propellor Shaft Cross Holderrds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Half Yog Make Rds , Propellor Shaft Nut Bolt 17 No. Make Tvs , Propellor Shaft Teeth Rear Make Rds , Propellor Shaft U J Cross Make Rds , Propullar Shaft Rear Completetelco , Pump Cap Make R.P.W , Pump Packing Make Banco , Push Rod Complete ( With Ends ) Rds , Push Rod Kit Make Chhener , Quarter Pin Spandle Make R.P.W , Quterpin Tie Rod Make R.P.W , Radiator Fan 1210 Make Inter Nationl , Radiator Fan 1612 Make Inter Nationl , Radiator Foundation Make Rider , Radiator Taan Long Make Rider , Radiator Thermostat Valve Make R.P.W , Radiotor Hose Pipekit Make Rider , Radiotor Hose Pipe Clip Make Wikman , Radiotor Hose Pipe Damru Type Make Rider , Radiotor Hose Pipe L Type Make Rider , Radiotor Hose Pipe S Type Make Rider , Radiotor Hose Pipe State Make Rider , Sidedoor Glass Make Atul , Side Door Glass Rubber Channelalp , Silencer Clip Make Gmi , Silencer Clip Nut Bolt Make Tvs , Silencer Hockey Pipe Make Gmi , Silencer Kothi Clip With Nut Boltgmi , Silencer Kothi Make Gmi , Silencer L Type Pipe Make Gmi , Silencer Manifold Pipe Make Gmi , Silencer Patti Big Make Gmi , Silencer Tail Pipe Big Make Gmi , Silencer Tail Pipe Straight Make Gmi , Silincer Pipes Type Make Gmi , Steering Adjusting Bolt + Lock Tvs , Steering Alter Bolt Make Tvs , Steering Arm Make Gajara , Steering Arm Nut Make Tvs , Steering Arm O Ring Make Rider , Steering Bearing 509043 Make Skf , Steering Bolt 19 No. Make Tvs , Steering Box Packing Make Banco , Steering Box Stud Make Tvs , Steering Bush Brass Make Make Srmt , Steering Bush Make Rider , Steering Check Nut Make Rana , Steering Column Bush Make Rider , Steering Cross Assembly Make Rds , Steering Oil Seal Make Rider , Steering Packing Make Banco , Steering Sector Shaft Make Telco , Steering Verm Rod Assy. Make Telco , Steering Verm Rod Cone Make Olma , Steering Wheel Lpt Make R.P.W , Steering Wheel S Model Make R.P.W , Tempreture Meter Make Pricol , Third Arm Bolt Make Tvs , Third Arm Make Telco , Tyrod Arm Make Rds , Tyrod End Make Chhener , Tyrod Kit Make Chhener , Water Body Stud With Nut 13 No. Make Tvs , Water Jacket Pipe Make Olma , Water Jacket Pipe Packing Make Banco , Wheel Alignment , Wheel Bearing 30209 Make Skf , Wheel Bearing 32212 Make Skf , Wheel Bearing 32213 Make Skf , Wheel Bearing 32214 Make Skf , Wheel Bearing 32216 Make Skf , Wheel Bearing 33019 Make Skf , Wheel Bearing Front 30312 Make Skf , Wheel Bearing Front 32308 Make Skf , Wheel Bearing Front 565 Make Skf , Wheel Bolt With Nut Front Make Tvs , Wheel Bolt With Nut Rear Make Tvs , Wheel Check Nut 1210 Make Gs , Wheel Check Nut 1612 Make Gs , Wheel Check Nut O / S Make Gs , Wheel Check Std Make Gs , Wheel Cut Woisher 6 / 8 Make Olma , Wheel Cylinderwasher44 No. Make Tvs , Wheel Cylinder Assembly 1.5 Tvs Make Tvs , Wheel Cylinder Assembly Fronttvs , Wheel Cylinder Assembly Rear Tvs , Wheel Cylinder Washer 50 No Make Tvs , Wheel Disc Plate 8Mm Make R.P.W , Wheel Disk Plate 10Mm Make R.P.W , Wheel Hub Axle Kangni Rear Make Rds , Wheel Hub Steel 7 / 8 Hole Reartata , Wheel Lock Woisher + Makkhi Woisher Make R.P.W , Wheel Nut Rear 6 / 8 Make Tvs , Wheel Nut Rear 7 / 8 Make Tvs , Wheel Oil Seal Front Make Rider , Wheel Oil Seal Rear Make Rider , Wheel Oil Seal Spacer Make Airo , Wheel Ring+Kada 900X20 Make Sr , Wheel Spandle Nut Front Wheeltvs , Wheel Woisher Plane 6 / 8 & 7 / 8 Make Olma , 8. Tata 709 A.C Pistion Make Mpr , A.C Pistion Pin Make Mpr , A.C. Piece Make Kirloskar , A.C. Ring Make Goetze , Accelator Tann Small Make Olma , Acceletor End Make Rpw , Acceletor Tann Big Make Olma , Acceletor Wire Lpt Make Pricol , Air Cleaner Clip Make Wikman , Air Cleaner Hose Pipe Big Make Rider , Air Cleaner Hose Pipe Make Rider , Air Cleaner Make Airo , Air Cleaner Ring Make Rider , Air Compressure Head Packing Make Banco , Axel Bolt Make Tvs , Axel Kangni Make Rpw , Axel Packing Make Banco , Axel Plate Make Olma , Axle Kagani Wala Make Eye , Axle Stud Std & Nut Make Tvs , Axle Stud Wala Make Eye , Benjo Bolt Make Tvs , Bharti Voisher Make Rpw , Brakebooster 45 / 2 Make Tvs , Brake Alter Rachit Make Tvs , Brake Booster Kit Major Make Tvs , Brake Booster Rubber Make Tvs , Brake Booster Tee Make Tvs , Brake Bottle Make Rpw , Brake Dyefram Rubber 470130 Make Tvs , Brake Liner Front With Rivit Maketvs , Brake Liner Rear With Rivit Make Tvs , Brake Main Pipe ( 10 Feet ) ( Steel ) Make Randeep , Brake Master Cylinder Assy. Make Tvs , Brake Master Cylinder Kit Major Make Tvs , Brake Master Cylinder Kit Minor Make Tvs , Brake Master Cylinder Pipe No.10 Randeep , Brake Paddle Pin Make Delta , Brake Paddle Pin Nut Bolt Make Tvs , Brake Pipe Front Steel Make Randeep , Brake Pipe Rear Steel Make Randeep , Brake Thali Bolt Make Tvs , Break Liner Kit Make Tvs , Break Pipe T ( Of Master Cylinder ) Rpw , Cabin Foundation Make Rider , Cabin Foundation Nut Bolt Make Tvs , Chasis Cross Member Center Bearing Wala Make M Brand , Chasis Cross Member Engine Wala Make M Brand , Chasis Cross Member Gear Wala Make M Brand , Chasis Cross Member Nut Bolt Make Tvs , Clutch Cylinder Assy. Lower Make Tvs , Clutch Cylinder Assy. Upper Make Tvs , Clutch Cylinder Bottle Make Rpw , Clutch Cylinder Hose Make Tvs , Clutch Cylinder Kituppermajor Make Tvs , Clutch Cylinder Kit Lower Major Make Tvs , Clutch Fark Lever Cone Make Rpw , Clutch Fingerkit Make Ca , Clutch Fork Lever Make Rpw , Clutch Fork Lever Patti Make Rpw , Clutch Hub Make Rds , Clutch Plate Ka Facing Make Ca , Clutch Plate New Make Ca , Clutch Release Bearing Make Skf , Clutch Taan Make Olma , Defentional Crown Bearing Make Skf , Defentional Crown Pinion Nut Make Tvs , Defentional Crown Pinion Oil Seal , Defentional Crown Star Woisher Make Airo , Defentional Crown Thrust Woisher Standard Make Airo , Defentional Crown With Pinion Make Gajara , Defentional Packing Make Banco , Defentional Pinion Bearing Make Skf , Defentional Pinion Flanch Make Rds , Defentionalcrown Pilot Bearing Make Skf , Defentionalcrown Pinion Jalebi Woisher Make Airo , Defentionalcrown Spider Kit Make Gajra , Diesel Benjo Pipe Make Randeep , Diesel Connection Overflow Pipe Make Randeep , Diesel Connection Pipe Double Banjo Make Randeep , Diesel Filter Bowel 0.5 Lt Make Mico , Diesel Filter Plate Make Mico , Diesel Filter Thhiya Make Rpm , Diesel Filter Thhiya Nut Bolt Make Tvs , Diesel Tank Bracket Make Telco , Diesel Tank Cock Nut Jali Wala Make Rpw , Diesel Tank Patti Make H.D. , Diesel Tanki Complete Make Telco , Disk Reparing 7.50X16 Make Genuine , Door Glass Machine Make Ci , Door Lock With Handle Make Ci , Double Banjo Pipe 12 Make Randeep , Double Banjo Pipe 24 Make Randeep , Double Banjo Pipe 36 Make Randeep , Dumper Pad Make Rider , Dumper Pad Nut Bolt Make Rider , Engine Slu ( Air Block ) Make Gajra , Engine Begin Bearing Make Kirloskar , Engine Block Make Telco , Engine Connecting Rod Bolt Make Tvs , Engine Connecting Rod Make Telco , Engine Cranck Shaft Assy Make Telco , Engine Crank Bearing 6205 Make Skf , Engine Foundation Bolt Make Tvs , Engine Foundation Left / Right Make Rider , Engine Foundation Thhiye Make R.P.W , Engine Foundation Woisher Make Tvs , Engine Headgaskit Half Make Banko , Engine Head Compressure Pipe Make Randeep , Engine Head Free Chamber Ring Make Banco , Engine Head Gaskit Full Make Banko , Engine Head Make Telco , Engine Head Valve Catcher Make R.P.W , Engine Head Valve Guide Make Friends , Engine Head Valve Make Evl , Engine Head Valve Seal Make Goetze , Engine Head Valve Seat Make Cosmo , Engine Head Woisher Make Airo , Engine Kem Bush Make Banara , Engine Kem Shaft Make Telco , Engine Kem Tikli Make Airo , Engine Liner Lock Make Airo , Engine Liner Slu Make Tiger Power , Engine Main Bearing Make Kirloskar , Engine Main Oil Seal Make Pioneer , Engine Oil Chamber Make Telco , Engine Oil Chamber Packing Make Banco , Engine Oil Filter Make Mico , Engine Oil Filter Thhiya Make Santo , Engine Oil Gauge Inner & Outer Make Randeep , Engine Oil Pipe Make Randeep , Engine Oil Pressure Pipe Make Randeep , Engine Oil Pump Gear Set Make Tata , Engine Oil Pump Valve Make Tata , Engine Oil Zhonga Ring Make R.P.W , Engine Oil Zonga Make R.P.W , Engine Oil Zonga Pipe Make Rider , Engine Over Flowvalve Make Mico , Engine Pistion Pin Make Mpr , Engine Piston Ring Make Mpr , Engine Piston Set Make Mpr , Engine Rocker Box Chiriya Make Telco , Engine Rocker Bush Make Mpr , Engine Rocker Shaft Make Mpr , Engine Tapit Cover Complete Make Telco , Engine Tapit Cover Oil Zonga Make R.P.W , Engine Tapit Cover Packing Make Banco , Engine Tapit Cover Pipe Lohe Wala Make Olma , Engine Tapit Screw Make R.P.W , Engine Thrust Voisher Make Banara , Engine Timer Gear Make Tata , Engine Timer Kit Make Tata , Engine Timing Cover Packing Make Banco , Engine Timing Oil Seal Kada Make Kross , Engine Timing Oil Seal Make Pioneer , Engine Timing Plate Packing Make Banco , Engine Water Pump Assy Make Indosuri , Engine Water Pump Bearing 15123 Make Skf , Engine Water Pump Bearing 30204 Make Skf , Engine Water Pump Major Kit Make Indosuri , Engine Water Pump Packing Make Banco , Engineconnecting Bush Make Kirloskar , Fan Belt 1325 Make Fanner , Frontwind Sheld Glass Make Atul , Frontwind Sheld Glass Rubber Channel Make Alp , Fry Wheel Bolt Make Tvs , Fry Wheel Patti Make R.P.W , Fry Whell Bearing 6204 Make Skf , Frywheel Ring Make Gajra , Gear 2Nd Make Gajra , Gear 2Nd Slu Make Gajra , Gear 3Rd Make Gajra , Gear 3Rd Top Main Slu Make Gajra , Gear 4Thring Make Gajra , Gear 4Th & Top Wheel Ring Make Gajra , Gear 4Th Make Gajra , Gear 4Th Slu Make Gajra , Gear Bearing Nu 209 Make Skf , Gear Bearing Qj 209 Make Skf , Gear Bolt 22 No. Make Tvs , Gear Box Chilam Make Rds , Gear Box Foundation Cover Make R.P.W , Gear Box Packing Make Banco , Gear Butter Ring Make R.P.W , Gear Changer Kangani Make Gajra , Gear Changer Lever Make Telco , Gear Charra Spring Make Olma , Gear Chilam Oil Seal Make Rider , Gear Counter Bearing 30207 Make Skf , Gear Counter Bearing 30308 Make Skf , Gear Counter Gear Big Double Make Gajra , Gear Counter Shaft Make Gajra , Gear Counter Shaft Shim Make Olma , Gear Dandacomplete Make Telco , Gear Dande Ka Lattoo Make Olma , Gear Dande Ki Katori Make Olma , Gear Dande Ki Spring Make Olma , Gear Dog Kit Make Tvs , Gear Double Small Make Gajra , Gear First Engaging Make Gajra , Gear First Kangni Lohe Ki Make Gajra , Gear First Make Gajra , Gear First Ring Make Gajra , Gear Flanch Make Rds , Gear Foundation Make Rider , Gear Handi Make Gajra , Gear Handi Ofpto Make Gajra , Gear Kangan Bearing Double Jali Make Deluxe , Gear Kangan Bearing Make Deluxe , Gear Kangni Third & Fourth Make Gajra , Gear Lever End Big Make Rane , Gear Lever End Small Make Rane , Gear Liver Lock Make R.P.W , Gear Main Shaft Make Gajra , Gear Main Shaft Shim Make R.P.W , Gear Main Shaft Voisher Make R.P.W , Gear Oil Seal Make Rider , Gear Pilot Bearing 2028 Make Deluxe , Gear Plate Alluminium Complete Make Telco , Gear Reverse Bearing Make Skf , Gear Reverse Idoler Make Gajra , Gear Reverse Make Gajra , Gear Reverse Pin Make Gajra , Gear Reverse Woisher Make R.P.W , Gear Synchronising Ring Make Gajra , Gear Tapa Kit Lpt Make Gajra , Gear Third Ring Make Gajra , Gear Topplate Make Gajra , Gear Top Ring Make Gajra , Gear Top Shaft Make Gajra , Gear Top Shaft Nut Make Tvs , Injectorfuel Pump Assy. Make Mico , Injector Diesel Pipe L Type & Z Type Make Randeep , Injector Nozzle Over All Kit Make Mico , Injector Nozzle Pipe Make Mico , Injector Nozzle Voisher Make Mico , Injector Packing Make Banco , Injector Pump Glassy Complete Make Mico , Injector Pump Over All Kit Make Mico , Kamaniclip 5 Make Gs , Kamani Aade Bolt 13 No. Make Tvs , Kamani Aade Bolt Nut 21 No. Make Tvs , Kamani Bush Make Gs , Kamani Clip 3.5 Rear Make Gs , Kamani Clip 4 Rear Make Gs , Kamani Clip 6 Make Gs , Kamani Clip 7 Make Gs , Kamani Clip 8 Make Gs , Kamani Hanger Bolt 18 No. Make Tvs , Kamani Helper Thhiye Make Gs , Kamani Jhula Front Make Gs , Kamani Jhula Rear Make Gs , Kamani Katar Bolt Make Tvs , Kamani Patta 3 No. Front Make Gs , Kamani Patta 3 No. Rear Make Gs , Kamani Patta 4 No. Front Make Gs , Kamani Patta 4 No. Rear Make Gs , Kamani Patta 5 No. Front Make Gs , Kamani Patta 5 No. Rear Make Gs , Kamani Patta 6 No. Clipwala Front Make Gs , Kamani Patta 6 No. Clipwala Rear Make Gs , Kamani Patta 7 No. Front Make Gs , Kamani Patta 7 No. Rear Make Gs , Kamani Patta 8 No. Front Make Gs , Kamani Patta 8 No. Rear Make Gs , Kamani Patta A No. Front Make Gs , Kamani Patta A No. Helper Make Gs , Kamani Patta A No. Rear Make Gs , Kamani Patta B No. Front Make Gs , Kamani Patta B No. Helper Make Gs , Kamani Patta B No. Rear Make Gs , Kamani Patta Mada Front Make Gs , Kamani Patta Mada Rear Make Gs , Kamani Patta Main Front Make Gs , Kamani Patta Main Helper Make Gs , Kamani Patta Main Rear Make Gs , Kamani Pin Front Make Gs , Kamani Pin Rear Make Gs , Kamani Shim Thick Make R.P.W , Kamani Shim Thin Make R.P.W , Kamani Thhiya Front Make Gs , Kamani Thiya Rear Make Gs , Kamani U Clamp 10 Inch Make Gs , Kamani U Clamp 11 Inch Make Gs , Kamani U Clamp 12 Inch Make Gs , Kamani U Clamp 6 Inch Make Gs , Kamani U Clamp 7 Inch Make Gs , Kamani U Clamp 8 Inch Make Gs , Kamani U Clamp Bracket Make Gs , Kamanicenter Bolt 12 Make Gs , King Pin Set ( Incl.Pin Bush Bearing ) Make Srmt , Milometer Chain Make Pricol , Milometer Rod Make R.P.W , Pressure Plate Assembly ( Finger ) Make Ca , Pressure Plate Assy. Sunflower Make Ca , Pressure Plate Bolt Make Tvs , Pressure Plate Tawa Make Ca , Propellor Shaftcenter Bearing Bracket Nut Bolt Make Tvs , Propellor Shaft Center Bearing Bracket Make R.P.W , Propellor Shaft Center Bearing Complete Make Skf , Propellor Shaft Center Bearing Cone Make R.P.W , Propellor Shaft Center Bearing Flanch Make Rds , Propellor Shaft Cent. Bearing Rubber , Propellor Shaft Center Bearing Teeth Make Rds , Propellor Shaft Cross Holder Make Rds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Nut Bolt Make Tvs , Propellor Shaft Rear Teeth Make Rds , Propellor Shaft U J Cross Make Rds , Radiatorhose Pipe L Type Make Rider , Radiator Cap Make R.P.W , Radiator Fan Make Inter National , Radiator Foundation Lower Make Rider , Radiator Foundation Upper Make Rider , Radiator Hose Clip Make Wikman , Radiator Hose Pipe Damroo Type Make Rider , Radiator Hose Pipe Kit Make Rider , Radiator Hose Pipe S Type Make Rider , Radiator Tan Long Make Rider , Radiator Thermostat Valve Make R.P.W , Radiator Thermostat Water Body Make Olma , Side Door Glass Make Atul , Side Door Glass Rubber Channel Make Alp , Silencer Band Pipe Make Gmi , Silencer Clipbigkothi Make Gmi , Silencer Clip Make Gmi , Silencer Haaki Pipe Make Gmi , Silencer Kothi Make Gmi , Silencer L Type Pipe Make Gmi , Silencer Manifold Make Gmi , Silencer Manifold Nut Bolt Make Tvs , Silencer Manifold Packing Make Banco , Silencer Manifold Pipe Make Gmi , Silencer Patti Make Gmi , Silencer Pipe Straight Make Gmi , Silencer S Pipe Make Gmi , Silincer Clip Fitting Nut Bolt Make Tvs , Spendal Nut Make Tvs , Spendle Quarterpin Make Rane , Steering Bearing Make Skf , Steering Bolt Make Tvs , Steering Cross Assembly Make Rds , Steering Nut Bolt Big Make Tvs , Steering O Ring Make Rider , Steering Packing Make Banco , Steering Push Rod End Make Chhener , Steering Push Rod Kit Make Rane , Steering Push Rod Make Airo , Steering Rod Group Type Make Indosuri , Steering Sector Shaft Make Indosuri , Steering Verm Rod Make Indosuri , Stering Cross Nut Bolt Make Tvs , Third Arm Bolt & Nut Make Tvs , Third Arm Make Telco , Tie Rod Assy Make Rds , Tie Rod End Kit Make Chhener , Tie Rod End Make Chhener , Wheel Hub With Drum Rear Make Franko , Wheel Alignment , Wheel Bearing 32307 Make Skf , Wheel Bearing Front 33111 Make Skf , Wheel Bolt Front Make Tvs , Wheel Bolt Rear Make Tvs , Wheel Cap Make Olma , Wheel Check Nut Make Gs , Wheel Cylinder Assy. Front Make Tvs , Wheel Cylinder Assy. Rear Tvs Make Tvs , Wheel Cylinder Bolt 10 No. Make Tvs , Wheel Cylinder Woisher Kit Front Make Tvs , Wheel Cylinder Woisher Kit Rear Make Tvs , Wheel Disk7.00X19 Make Havey Duty , Wheel Disk7.50 X 16 Make Havey Duty , Wheel Disk Plate 7.50X16 ( 8 Mm. ) Make Havey Duty , Wheel Disk Plate 700X 19 ( 10 Mm ) Make Havey Duty , Wheel Lock Woisher Make R.P.W , Wheel Makkhi Woisher Make R.P.W , Wheel Nut Front Make Tvs , Wheel Nut Rear Make Tvs , Wheel Oil Seal Front Make Rider , Wheel Oil Seal Kada Make R.P.W , Wheel Oil Seal Rear Inner Make Rider , Wheel Oil Seal Rear Outer Make Rider , Engine Head Guide, Headseat Opening Fitting And Griding , Engine Liner Fitting, Block Honing ( Boring ) , Rocker Bush, Connecting Bush, Cam Bush Fitting , Engine Crank Grinding, Polish , 709 1.5 Length Nut Bolt 4Soot Thick , 709 1St Gear Lever , 709 2 Width 12Mm Thick 20 Ft. Long Patta , 709 3Rd Top Fark , 709 3Rd Top Gear Liver , 709 6 Length Nut Bolt 4Soot Thick , 709 A.C. Head Repairing , 709 Accelerator Wire , 709 Axle Me Dye Ghumana ( Thread Banana ) , 709 Bearing 30205 , 709 Bearing 30306 , 709 Bearing 32305 , 709 Bearing 32306 , 709 Benjo Bolt Ke Woisher , 709 Bolt 2.5 , 709 Brake Liner Fitting , 709 Brake Paddle Spring , 709 Brake Paddle Spring , 709 Cabin Rear Glass , 709 Cabin Rear Glass Fitting , 709 Center Bolt 5 4 Soot , 709 Chassis Thiya , 709 Clip Of Oil Jhonga Pipe , 709 Clutc Plate Dhaagewali , 709 Clutc Plate Dhaagewali , 709 Clutch Fark Bolt ( Ghundiwala ) , 709 Clutch Plate ( Dhhagewali ) Gb30 , 709 Clutch Plate ( Dhhagewali ) Gb30 , 709 Clutch Plate Facing , 709 Clutch Plate Facing Fitting , 709 Control Valve O Ring Kit , 709 Control Valve Spool Rod , 709 Counter Opening Fitting , 709 Crank Gear , 709 Dhadi Repairing , 709 Diesel Pipe 19 No Benjo , 709 Diesel Pipe Filter To Pump , 709 Diesel Tank Nut , 709 Diesel Tank Nut Fitting , 709 Differential Oil Drain Cock , 709 Door Outer Handle , 709 Door Outer Handle , 709 Drum Cut Polish , 709 Engine Ac Block , 709 Engine Opening Fitting , 709 Engine Starter Relay , 709 Ex2 Air Filter , 709 Ex2 Diesel Filter , 709 Fark 1St & 2Nd , 709 Fark 1St & 2Nd , 709 Fark Rod , 709 Feed Pump Assy. Packing , 709 Fevibond Tube , 709 Flywheel Bolt Removing , 709 Flywheel Cut Polish , 709 Flywheel Facing , 709 Flywheel Top Drilling , 709 Front Main Glass Opening Fitting , 709 Full Engine Servicing , 709 Gear Changer Lever Gb30 , 709 Gear Chilam Packing , 709 Gear Danda Kit , 709 Gear Danda Lattu , 709 Gear Danda Patti , 709 Gear Lever Bansuri , 709 Gear Opening Fitting , 709 Gear Tapa Lever , 709 Gear Tapa Repairing , 709 Gear Tapa Rod , 709 Group Making In Axle , 709 Group Making Of Hub , 709 Hanger Bolt Woisher , 709 Hub Bearing Lock No. 12 , 709 Injector Nozzle Servicing , 709 Injector Pump Body , 709 Injector Pump Nozzle Repairing , 709 Injector Pump Servicing , 709 Inner Door Lock ( Lhs ) , 709 Kit Fitting In Master Cylinder , 709 Kit Fitting In Master Cylinder , 709 Kit Fitting In Survery , 709 Lift Hydraulic Pump , 709 Liner Cutting , 709 Liner Fitting , 709 Manifold Nut 5 No.17 , 709 Master Cylinder Repairing , 709 Oil Filter , 709 Oil Filter , 709 Oil Pipe ( Big ) , 709 Pilot Bearing Lock , 709 Pinion Lock Ka Gala , 709 Pressure Plate Cut Polish , 709 Pressure Plate Facing , 709 Pto Gear Lever Thread Making , 709 Pto Shaft , 709 Quarter Patti , 709 Rear Teeth Opening Fitting , 709 Rear Teeth Opening Fitting , 709 Reverse Special Fark , 709 Reverse Special Fark , 709 Rocker Rod Lock , 709 Rubber Coupling Of Pto , 709 Self Stud Nut , 709 Sheem , 709 Silencer Clip Nut Bolt Ke Woisher , 709 Slu , 709 Spring Woisher 10 No. , 709 Spring Woisher 12 No. , 709 Spring Woisher 17 No. , 709 Spring Woisher 19 No. , 709 Spring Woisher 22 No. , 709 Spring Woisher 24 No. , 709 Steering Bush , 709 Steering Rod , 709 Supporter Bolt , 709 Survey Repairing , 709 Tapid Push Rod , 709 Timer Gear Opening Fitting , 709 Uj Corss , 709 Water Pump Assy. , 709 Water Pump Packing , 9. Tata 407407 Brake Paddle Gutke , 407 Clutch Paddle Gutke , 407 Cut In Main Shaft , 407 Diesel Pipe , 407 Engaging Gear Fitting , 407 Filling In Gear Tapa , 407 Flywheel Facing , 407 Fog Lever , 407 Gear Danda , 407 Gear Foundation Thhiya , 407 Gear Gande Ki Pin , 407 Gear Tapa Repairing , 407 Half Yog , 407 Half Yog Opening Fitting , 407 Hydraulic Pump Belt , 407 Kit Fitting In Master Cylinder , 407 Liner Opening Fitting , 407 Main Shaft Bearing , 407 Main Shaft Gear Opening Fitting , 407 Main Shaft Lock , 407 Main Shaft Nut , 407 Rc Cable ( Rhs ) , 407 Rc Handle Taan ( Rhs ) , 407 Servo Me Kit Dalana , 407 Servo Tee Valve , 407 Shaft Nut Bolt 12 No. 1.5 , 407 Side Door Inner Handle ( Rhs ) , 407 Side Door Outer Handle ( Rhs ) , 407 Side Thessi ( Rhs ) With Nut Screw 13 No. , 407 Top Shaft Bearing , 407 Water Pump , Air Cleaner Clip Make Hevay Duty , Air Cleaner Hose Pipe Big Make Rider , Air Cleaner Hose Pipe Make Rider , Air Cleaner Make Olma , Air Cleaner Ring Make Rider , Air Compressure Head Packing Make Banco , Axel Bolt Make Tvs , Axel Kangni Make R.P.W , Axel Packing Make Banco , Axel Plate Make R.P.W , Axle Group Wala ( Dogla Axle ) Make Eye , Axle Stud Std & Nut Make Tvs , Benjo Bolt Make Mico , Bharti Voisher Make Hevay Duty , Brake Alter Rachit Make Rane , Brake Booster Assy. Make Tvs , Brake Booster Kit 45 / 1 Make Tvs , Brake Booster Rubber Make Tvs , Brake Booster Tee Make Tvs , Brake Bottle Make R.P.W , Brake Liner Front With Rivit Make Tvs , Brake Liner Rear With Rivit Make Tvs , Brake Pipe Front Steel Make Randeep , Brake Pipe Rear Steel Make Randeep , Brake Thali Bolt Make Tvs , Break Dibbi Make R.P.W , Break Liner Kit Make Tvs , Break Master Cylinder Assy Make Tvs , Break Master Cylinder Assy. ( Double Cylinder ) Make Tvs , Break Master Cylinder Kit Major Make Tvs , Break Master Cylinder Kit Minor Make Tvs , Break Master Cylinder Pipe No.10 Make Randeep , Break Pipe T ( Of Master Cylinder ) Make R.P.W , Cabin Foundation Make Rider , Cabin Foundation Nut Bolt Make Telco , Chasis Cross Member Center Bearing Wala Make Telco , Chasis Cross Member Engine Wala Make Telco , Chasis Cross Member Gear Wala Make Telco , Chasis Cross Member Nut Bolt Make Tvs , Clutch Cylinder Assy. Lower Make Tvs , Clutch Cylinder Assy. Upper Make Tvs , Clutch Cylinder Bottle Make R.P.W , Clutch Cylinder Kit Lower Major Make Tvs , Clutch Cylinder Kit Upper Major Make Tvs , Clutch Fark Lever Cone Make R.P.W , Clutch Figure Kit Make Ca , Clutch Fork Lever Make R.P.W , Clutch Fork Lever Patti Make R.P.W , Clutch Hub Make Delta , Clutch Plate Kafacing Make Ca , Clutch Plate New Make Ca , Clutch Release Bearing Make Skf , Clutch Taan Make R.P.W , Defentional Crown Pinion Make Gajra0 , Defentional Crown Pinion Nut Make Tvs , Defentional Crown Pinion Oil Seal Make Rider , Defentional Crown Spider Kit Make Gajara , Defentional Crown Star Woisher Make Airo , Defentional Crown Thrust Woisher Standard Make Airo , Defentional Packing Make Banco , Diesel Benjo Pipe Make Randeep , Diesel Connection Overflow Pipe Make Randeep , Diesel Connection Pipe Double Banjo Make Randeep , Diesel Filter Bowel Make Mico , Diesel Filter Plate Make Mico , Diesel Filter Thhiya Make R.P.W , Diesel Filter Thhiya Nut Bolt Make Tvs , Diesel Pipe L Type & Z Type Make Randeep , Diesel Tank Bracket Make Telco , Diesel Tank Cock Nut Jali Wala Make R.P.W , Diesel Tank Patti Make Hevay Duty , Diesel Tanki Complete Make Telco , Disk Repairing 7.50X16 Make Genuine , Door Glass Machine Make Ci , Door Lock And Handle Make Ci , Engine A.C. Piece Make Kirloskar , Engine A.C. Ring Make Goetze , Engine Begin Bearing Make Kirloskar , Engine Block Make Telco , Engine Cam Shaft Make Telco , Engine Connecting Bush Make Kirloskar , Engine Connecting Rod Bolt Make Tvs , Engine Connecting Rod Make Telco , Engine Cranck Shaft Make Bharat , Engine Crank Grinding, Polish , Engine Crank Make Telco , Engine Foundation Bolt Make Tvs , Engine Foundation Left Make Rider , Engine Foundation Right Make Rider , Engine Foundation Thhiye Make R.P.W , Engine Headgaskit Half Make Banko , Engine Head Compressure Pipe Make Randeep , Engine Head Gaskit Full Make Banko , Engine Head Guide, Headseat Opening Fitting And Griding Facing , Engine Head Make Telco , Engine Head Valve Catcher Make R.P.W , Engine Head Valve Guide Make Evl , Engine Head Valve Make Evl , Engine Head Valve Seal Make Goetze , Engine Head Valve Seat Make Evl , Engine Head Woisher Make R.P.W , Engine Kem Bush Make Mpr , Engine Kem Tikli Make Airo , Engine Liner Lock Make Airo , Engine Liner Slu Make Tiger Power , Engine Main Bearing Make Kirloskar , Engine Main Oil Seal Make Pioneer , Engine Oil Chamber Make Telco , Engine Oil Filter Make Mico , Engine Oil Gauge Inner & Outer Make R.P.W , Engine Oil Pipe Make Randeep , Engine Oil Pressure Pipe Make Randeep , Engine Oil Pump Gear Set Make Tata , Engine Oil Pump Valve Make Tata , Engine Oil Zhonga Ring Make Rider , Engine Oil Zonga Make Olma , Engine Oil Zonga Pipe Make Rider , Engine Over Flow Voisher Make Olma , Engine Piston Pin Make Goetze , Engine Piston Ring Make Goetze , Engine Piston Set Make Goetze , Engine Rocker Bush Make Kirloskar , Engine Rocker Shaft Make Telco , Engine Tapit Cover Complete Make Telco , Engine Tapit Cover Packing Make Banco , Engine Tapit Cover Pipe Lohe Wala Make Olma , Engine Tapit Screw Make Tvs , Engine Thrust Voisher Make Mpr , Engine Timer Gear Make Telco , Engine Timer Kit Make Telco , Engine Timing Cover Packing Make Banco , Engine Timing Oil Seal Kada Make Kross , Engine Timing Oil Seal Make Pioneer , Engine Timing Plate Packing Make Banco , Engine Water Pump Major Kit Make Indosuri , Engine Water Pump Packing Make Banco , Engineoil Chamber Packing Make Banco , Fan Belt1338 Make Fanner , Fly Whell Assy Make Telco , Front Glass Rubber Channel Make Alp , Front Wind Sheld Glass Make Atul , Fry Wheel Bolt Make Tvs , Fry Wheel Patti Make R.P.W , Frywheel Ring Make Gajra , Gear 2Nd Make Gajra , Gear 2Nd Slu Make Gajra , Gear 3Rd Make Gajra , Gear 3Rd Top Main Slu Make Gajra , Gear 4Thring Make Gajra , Gear 4Th & Top Wheel Ring Make Gajra , Gear 4Th Make Gajra , Gear 4Th Slu Make Gajra , Gear Box Chilam Make Rds , Gear Box Foundation Cover Make R.P.W , Gear Box Packing Make Banco , Gear Butter Ring Make Olma , Gear Changer Kangani Make Gajra , Gear Charra Spring Make Olma , Gear Chilam Oil Seal Make Rider , Gear Counter Gear Big Double Make Gajra , Gear Counter Shaft Make Gajra , Gear Dande Ka Lattoo Make Olma , Gear Dande Ki Katori Make Olma , Gear Dande Ki Spring Make Olma , Gear Dog Kit Make Tvs , Gear Double Small Make Gajra , Gear Engaging Make Gajra , Gear First Kangni Lohe Ki Make Gajra , Gear First Make Gajra , Gear First Ring Make Gajra , Gear Flanch Make Rds , Gear Foundation Make Rider , Gear Handi Pto Wali Make Gajra , Gear Kangan Bearing Double Jali Make Skf , Gear Kangan Bearing Make Skf , Gear Kangni 1St & 2Nd Make Gajra , Gear Kangni Special Make Gajra , Gear Kangni Third & Fourth Make Gajra , Gear Lever End Big Make Rane , Gear Lever End Small Make Rane , Gear Main Shaft Make Gajra , Gear Main Shaft Shim Make R.P.W , Gear Main Shaft Voisher Make R.P.W , Gear Oil Seal Make Rider , Gear Pilot Bearing Make Skf , Gear Plate Alluminium Complete Make Telco , Gear Plate Milometer Make Telco , Gear Reverse Bearing Make Skf , Gear Reverse Idoler Make Gajra , Gear Reverse Make Gajra , Gear Reverse Pin Make Gajra , Gear Reverse Woisher Make R.P.W , Gear Synchronising Ring Make Gajra , Gear Tapa Kit Lpt Make R.P.W , Gear Top Gear Plate Make Gajra , Gear Top Ring Make Gajra , Gear Top Shaft Make Gajra , Gear Top Shaft Nut Make Rane , Injector Fuel Pump Assy. Make Mico , Injector Glassy Complete Make Mico , Injector Nozzle Over All Kit Make Mico , Injector Nozzle Pipe Make Mico , Injector Nozzle Voisher Make Mico , Injector Packing Make Banco , Injector Pump Over All Kit Make Mico , Kamani Bush Front Make Gs , Kamani Bush Rear Make Gs , Kamani Helper Thhiye Make Gs , Kamani Jhula Front Make Gs , Kamani Jhula Rear Make Gs , Kamani Katar Bolt Make Gs , Kamani Patta 3 No. Front Make Gs , Kamani Patta 3 No. Rear Make Gs , Kamani Patta 4 No. Front Make Gs , Kamani Patta 4 No. Rear Make Gs , Kamani Patta 5 No. Front Make Gs , Kamani Patta 5 No. Rear Make Gs , Kamani Patta 6 No. Clipwala Front Make Gs , Kamani Patta 6 No. Clipwala Rear Make Gs , Kamani Patta 7 No. Front Make Gs , Kamani Patta 7 No. Rear Make Gs , Kamani Patta 8 No. Front Make Gs , Kamani Patta 8 No. Rear Make Gs , Kamani Patta A No. Front Make Gs , Kamani Patta A No. Helper Make Gs , Kamani Patta A No. Rear Make Gs , Kamani Patta B No. Front Make Gs , Kamani Patta B No. Helper Make Gs , Kamani Patta B No. Rear Make Gs , Kamani Patta Mada Front Make Gs , Kamani Patta Mada Rear Make Gs , Kamani Patta Main Front Make Gs , Kamani Patta Main Helper Make Gs , Kamani Patta Main Rear Make Gs , Kamani Pin Front Make Gs , Kamani Pin Rear Make Gs , Kamani Shim Thin Make Gs , Kamani Thhiya Front Make Gs , Kamani Thiya Rear Make Gs , Kamani U Clamp Bracket Make Gs , Kamani Woisher Thick Make Gs , King Pin Katter Pin Make Tvs , King Pin Set ( Including Pin Bush Bearing ) Make Srmt , King Pin Spendal Nut Make Tvs , Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Milometer Chain Make Pricol , Milometer Rod Make R.P.W , Pressure Plate Assembly Finger Wali Make Ca , Pressure Plate Assy. Sunflower Make Ca , Pressure Plate Bolt Make Tvs , Pressure Plate Tawa Make Ca , Propellor Shaft Cross Holder Make Rds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Nut Bolt Make Tvs , Propellor Shaft U J Cross Make Rds , Propullar Shaft Center Bearing Bracket Nut Bolt Make Tvs , Propuller Shaft Cent Bearing Complete Make Skf , Propuller Shaft Cent Bearing Rubber Make Rider , Propuller Shaft Center Bearing Bracket Make R.P.W , Propuller Shaft Center Bearing Cone Make R.P.W , Propuller Shaft Center Bearing Flanch Make Rds , Propuller Shaft Center Bearing Teeth Make Rds , Push Rod Repairing Kit Make Chhener , Radiator Cap Make R.P.W , Radiator Fan Make Inter National , Radiator Foundation Lower Make Rider , Radiator Foundation Upeer Make Rider , Radiator Hose Clip Make Wikman , Radiator Hose Pipe Damroo Wala Make Rider , Radiator Hose Pipe Kit Make Rider , Radiator Hose Pipe L Type Make Rider , Radiator Hose Pipe S Type Make Rider , Radiator Tan Long Make Rider , Radiator Thermostat Valve Make R.P.W , Radiator Thermostat Water Body Make R.P.W , Side Door Glass Make Atul , Side Door Glass Rubber Channel Make Alp , Silencer Bend Pipe Make Gmi , Silencer Clipkothi Big Make Gmi , Silencer Clip Make Gmi , Silencer Haaki Pipe Make Gmi , Silencer Kothi Make Gmi , Silencer L Type Pipe Make Gmi , Silencer Manifold Make Telco , Silencer Manifold Nut Bolt Make Tvs , Silencer Manifold Packing Make Banco , Silencer Manifold Pipe Make Gmi , Silencer Patti Make Gmi , Silencer Pipe Straight Make Gmi , Silencer S Pipe Make Gmi , Silincer Fitting Nut Bolt Make Tvs , Steering Bearing Make Skf , Steering Bolt Make Tvs , Steering Cross Assembly Make Rds , Steering Nut Bolt Big Make Tvs , Steering O Ring Make Rider , Steering Packing Make Banco , Steering Push Rod End Make Chhener , Steering Push Rod Make R.P.W , Steering Rod Groupwali Make R.P.W , Steering Sector Shaft Make Gajara , Steering Verm Rod Make Rds , Third Arm Bolt & Nut Make Tvs , Third Arm Bolt 6 Inch Make Tvs , Tie Rod End Kit Make Rane , Tie Rod End Make Rane , Wheel Alignment , Wheel Bearing Front Big Make Skf , Wheel Bearing Front Small Make Skf , Wheel Bearing Rear Big Make Skf , Wheel Bearing Rear Small Make Skf , Wheel Bolt Front With Nut Make Tvs , Wheel Bolt Rear With Nut Make Tvs , Wheel Cap Make Olma , Wheel Check Nut Make Gs , Wheel Cylinder Assy. Front Make Tvs , Wheel Cylinder Assy. Rear Make Tvs , Wheel Cylinder Bolt 10 No. Make Tvs , Wheel Cylinder Woisher Kit Front Make Tvs , Wheel Cylinder Woisher Kit Rear Make Tvs , Wheel Lock Woisher Make Tvs , Wheel Makkhi Woisher Make Tvs , Wheel Nut Front Make Tvs , Wheel Nut Rear Make Tvs , Wheel Oil Seal Front Make Rider , Wheel Oil Seal Kada Make R.P.W , Wheel Oil Seal Rear Inner Make Rider , Wheel Oil Seal Rear Outer Make Rider , 10. Tractor Parts ( Sonalica, Eicher, New Holland, Swaraj Mazada, Farmtrac ) Assy Engine Comp. W / Clutch , Assy Half Block , Assy Long Block , Gasket Kit ( Engine Overhaul ) , Decarbonising Gasket Kit , Assy Cyl Crankcase Without Cl Hsg:E Iii With 77 Dia Air Compressor For Rope Seal , Cylinder Liner , Screw Plug , Sealing Washer 18X22 Is3175 Cu , Sealing Plug , Sleeve Cyl Block , Clamping Sleeve Cyl Block , Cyl. Pin 12 H 8X30 , Locking Cover , Sealing Plug Am 16X1.5 ( Oil Gallery ) , Sealing Washer 16X22 , Cyl. Pin ( Cyl Head To Cyl Block ) , Cyl Pin 8 M 6X16 , Bolt For Main Bearing Cap , Locating Pin , Assy Tube Dipsitck W / O Nut & Ferrule , Assy Oil Dipstick Complete , Assy Timing Gear Hsg With Bottom Cover , Cyl Pin 8 M 6X16 , Gasket ( Timing Gear Housing ) , Locking Plate , Hex Screw M 10X25 , Assy Tgh Cover With Helicoil , Stud Bm 8X20 , Oil Seal-Crankshaft Front , Tgh Cover Gasket , Integral Shaft Bearing ( Mech Feed Pump ) , Cam ( Mech Feed Pump ) , Stud ( Cm6x16 ) , Spider- ( Mech Feed Pump ) , Assy Breather , Hose ( Breather ) , Hose Clip 25 , Assy Cover Push Rod Chamber , Gasket-Pushrod Chamber Cover , Assy.Oilsump W / O Dipstick Flanges , Sealing Washer 18X22 Is3175 Cu , Assy Magnetic Drain Plug , Retaining Flange On Oil Sump , Spring Washer B 6 , Hex Screw M 6X12 , Gasket ( Bracket To Oil Sump ) Bsiv , Flange Oil Sump Dipstick , Hex Screw M 8X22 , Spring Washer B8 Is3063 Ss8451-8C , Double Socket , Set Oil Sump Gaskets , Oil Pan Damper , Oil Pan Damper-Small , Prc Baffle Cover , Assy Combi Screw , Engine Speed Sensor , Assy Cyl.Hd.W.Vales ( 60Deg Inlet ) :4Spbs3 , Assy Cylinder Head W / O Valves , Plug Mc 30X1.5 , Seat Plug ( On Cyl Head ) , Core Plug 20 Dia , Set Of Valve Seat Ring E-Iii Std , Consists Of: , Valve Seat Ring Inlet Bs-Iii Normal , Valve Seat Ring-Exhaust ( Cng ) -Normal , Valve Guide Inlet Std 15.00 Mm Dia , Valve Guide-Exhaust ( Std ) , Valve Guide Seal-Inlet , Valve Guide Seal-Exhaust , Valve Spring ( Inner ) , Valve Spring ( Outer ) , Valve Spring Washer , Lock Retainer Valve Spring , Valve Spring Lock Half , Inlet Valve ( 60 Deg ) -Rane Evl , Valve-Exhaust ( Euro-Iii ) -Evl , Cylinder Head Gasket-1.35 Thick , Assy Cylinder Head Cover ( Alluminium Side ) , Cap ( For Cyl Head Cover ) , Gasket , Gasket ( Intake Mani.Cum Head Cover ) -Ssl , Hex Flange Bolt ( M 8X 122 L ) , Hex Collar Bolt , Air Inlet Elbow , Gasket With Beading ( Air Intake Elbow ) , Boost Pressure / Temp Sensor , Assy Crankshaft ( Int ) With Pin:Normal , Ball Bearing , Locking Ring Crankshaft , Crank Shaft Gear , Key 8X13 , Oil Slwinger , Spacer ( Suitable For Oil Slwinger ) , Assy Pulley With Cover ( 2 Groove ) , Thrust Spacer , Vibration Damper Lock , Kit-Sealing Ring C / Shaft W / Loc.Pins , Consists Of: , Sealing Ring Half , Locating Pin , Flywheel , Assy Flywheel With Ring Gear: Bs-Iii , Ring Gear , Locking Plate , Hex Head Bolt , Connecting Rod , Assy Connecting Rod Without Brg Shells , Assy Con Rod Wbush & Bolt :Fs:Normal , Consists Of: , Connecting Rod , Connecting Rod Bush Normal , Connecting Rod Bolt , Con.Rod Cap , Bush Set Connecting Rod Std , Consists Of: , Connecting Rod Bush Std , Connecting Rod Bolt ( Fully Threaded ) , Connecting Rod Bearing Set , Connecting Rod Bearing Set Std , Consists Of: , Connecting Rod Bearing Half Std , Connecting Rod Bearing Set R / S I , Consists Of: , Connecting Rod Bearing Half R / S I , Connecting Rod Bearing Set R / S Ii , Consists Of: , Connecting Rod Bearing Half R / S Ii , Set-Bearing, Connecting Rod , Consists Of: , Connecting Rod Bearing Half R / S Iii , Connecting Rod Bearing Set R / S Iv , Consists Of: , Connecting Rod Bearing Half R / S Iv , Main Bearing And Thrust Washer Set , Set Main Bearing Upper / Lower Std Consists Of: , Main Bearing Half Upper Std , Main Bearing Half Lower Std , Set-Main Bearing, Upper / Lower, Repair Size -I Consists Of: , Main Bearing Half Upper Repair Size -I , Main Bearing Half Lower Repair Size -I , Set-Main Bearing, Upper / Lower, Repair Size -Ii Consists Of: , Main Bearing Half Upper Repair Size - Ii , Main Bearing Half Lower Repair Size -Ii , Set-Main Bearing, Upper / Lower, Repair Size -Iii Consists Of: , Main Bearing Half Upper Repair Size -Iii , Main Bearing Half Lower Repair Size -Iii , Set-Main Bearing, Upper / Lower, Repair Size -Iv Consists Of: , Main Bearing Half Upper Repair Size -Iv , Main Bearing Half Lower Repair Size -Iv , Consists Of: , Main Bearing Half Upper Std , Main Bearing Half Lower Std , Set Of Thrust Washer Std , Consists Of: , Thrust Washer Lower Half Std , Thrust Washer Upper Half Std , Set Of Thrust Washer R / S I , Consists Of: , Thrust Washer Lower Half R / S I , Thrust Washer Upper Half R / S I , Set Of Thrust Washer R / S Ii , Consists Of: , Thrust Washer Lower Half R / S Ii , Thrust Washer Upper Half R / S Ii , Piston And Piston Ring Set , Set : Bare Piston ( Goe India ) :497 Bsiii , Piston Set 497 Bs-Iii Std , Piston , Pin , Circlip , Set : Piston Ring :497Bsiii / 4Sp Bs Iii , Plasma Filled Keystone Ring-I , Inter Stepped Compression Ring , Assy Oil Control Ring Groove Iii , Piston Ring Set 497 Bs-Iii Std , Plasma Filled Keystone Ring-I , Inter Stepped Compression Ring , Assy Oil Control Ring Groo , Assy Camshaft W Cyl Pin:Normal , Cylinder Pin ( Cam Shaft ) , Cam Shaft Gear , Bolt ( Cam Shaft Gear Mtg ) , Thrust Washer , Hex Screw , Drive Gear ( Fip ) , Butting Ring , Parallel Key , Valve Tappet Inlet & Exhaust Std , Valve Push Rod Inlet & Exhaust , Assy Rocker Arm Left With Bush , Assy Rocker Arm Right With Bush , Bush , Ball End Tappet Adjuster , Hex Nut ( Ball Pin -Rocker Arm ) , Spring Long , Assy Rocker Arm Shaft With Arms Complete , Assy Rocker Arm Shaft , Sealing Cap 14 , Connecting Nipple Inside , Spring Connecting Nipple , Connecting Nipple Outside , Rocker Arm Support No. 1 , Rocker Arm Support No. 3 & 4 , Bolt ( Rocker Arm ) , Grub Screw Em6x10 , Spring Short , Spring Clip , Set Of Camshaft Bearing Std , Consist Of : , Camshaft Bearing No. 1 , Assy Fip Rotary 497 Bsiii , Fip Support Plate , Inj.Pump Gear ( Mech.Feed Pump ) , Gasket ( Fip To Support ) , Gasket ( Support Injection Pump ) , Rubber Tube ( 140 ) , Hose ( Reducer For Leak Off ) L350 Mm , Clamp ( Injector Overflow Tube ) , Assy Bracket ( Fip Mtg.On Cyl.Crankcase ) , Fuel Pressure Lines ( Euro Iii ) , Set:Assy Fuel Pr.Line:Bsiii-Fltg Filter , Assy Injector ( Nbfe Type ) , Connector One Tube , Assy Injector Normal , Connector Two Tubes , Injector Claw , Hex Fl. Bolt-M8x33.5 , Sph Washer 8.4 , Assy Fuel-Water Separator , Fuel - Water Seperator Spin On , Catridge - Fuel Water Seperator - Spinon , Water In Fuel Sensor , Bracket ( Fuel Filter Mtg ) , Assy Fuel Line ( F.Pump To Filter ) , Clamp , Bracket , Assy Fuel Line ( Filter To Fip ) , Pipe Union Bolt 8 M12x1.5 , Sealing Washer 12X15.5 , Assy Overflow Line , Support Bracket ( Over Flow Line ) , Clamp , Sealing Washer 14X18 Is3175 Al , Pipe Union Bolt 10 M14x1.5 Ts16405 , Assy Feed Pump ( Mechanical ) , Gasket ( Mechfeed Pump ) , Hose ( Reducer For Leak Off ) L350 Mm , Assy Connecting Rod ( W / O Brgs ) , Guide Screw , Hex Nut , Bush ( Connecting Rod ) , Cylinder Sleeve. , Gasket, Cylinder Sleeve To Cyl. Block , Assy Cylinder Head , Gasket ( For 77 Dia.A.C.Head To Cylsleeve ) , Air Compressor Cyl Head Gas / Kit , Hex Head -Coller Bolt , Lock Nut M22x1.5 Ts17408 Ss8451-8C , Screw M 8X30 , Spring Washer B 8 , Assy Piston With Rings , Set Piston Ring Std 77D , Set, A / C Con Rod Bearing , Consisting Of : , Bearing Half, Upper , Bearing Half, Lower , Assy Pipe , Rubber Hose , Hose Clamp ( 23 Dia ) , Elbow K15 M 22X1.5 , Bracket , Hex Screw M12x25 Is1364p2-8.8-Ss8451-8C , Assy Turbocharger M / S Turboenergy , Assy Turbocharger M / S Holset , Assy Turbocharger ( Honeywell ) , Intermediate Pipe ( Turbocharger To Exh. Pipe ) , Exhaust Manifold , Gasket Exhaust Manifold , Gasket ( Exh Manifold To Turbo Charger ) , Stud Bm 8X25 ( Manifold To Turbocharger ) , Self Locking Nut , Stud Bm 8X35 ( Tc To Intermediate Pipe ) , Self Locking Nut , Heat Shield ( For Exhaust Manifold ) , Gasket ( Turbocharger To Intermediate Pipe ) , Assy Heat Shield ( For Starter Motor ) , Assy Bracket ( Tc Intermediate Pipe ) , Assy Flange ( Tc Outlet To Oil Sump ) , Gasket ( Tc Outlet ) , Gasket Turbocharger Outlet , Rubber Hose ( Tc To Cyl.Block ) , Repair Kit For Turbo Charger , Consists Of : , Journal Bearing , Thrust Bearing , Split Seal Ring , Split Seal Ring ( Compressor ) , O Ring ( Bearing Housing ) , O Ring ( Compressor ) , Lock Nut ( Compressor Wheel ) , Retaining Ring , Assy Adaptor With Pipe ( Tel Tc ) , Vee Band Clamp , Hose Clamp Tb 64 , Hose ( Int Cooler To Pipe ) , Assy Pipe ( Tc To Ic ) , Support ( For Pipe Tc To Ic ) , Hump Hose , Assy Intercooler ( Vave ) , Intercooler:Lpt709 Bsiiex:M / S Tata Toyo , Assy Intercooler ( Vave ) :M / S Alkraft , Assy Pipe ( Ic To Air Intake Elbow ) :Lpt , P Type Clamp , Support ( For Fill Pipe & Ic Pipe ) , Assy Support ( On Bridge ) Ic To Elbow , Starter Motor 12V , Spacer , Earth Strap , Alternator 14V, 65 Amps, 2 Groove Pulley ( Mico ) , Alternator 2Sa28 12 65A ( Ltvs ) , Bracket ( Alternator Mounting ) , Assy Clamp Rod Complete , Clamping Piece , Clamping Nut , Bolt For Fixing Alternator , Spring Alternator , Locking Plate , V Belt Cogged 1280 Long , Ecu, Ems Vp37 For Diesel Engine Euro-Iii , Assy Ecu Mounting Bracket , Oil Pump , Assy Oil Pump Without Strainer , Oil Pump Housing , Assy Strainer Oil Pump , Assy Strainer , Shaft Driven Gear , Oil Pump Gear ( Driven ) , Drive Shaft Oil Pump , Oil Pump Gear Driveshat , Woodruff Key 3X6.5 , Drive Gear Oil Pump , Valve Housing Oil Pr Relief Valve , Spring Pressure Relief Valve , Plunger ( For Oil Pressure Relief Valve ) , Plug Relief Valve -Oil Pump , Gasket , Kit, Oil Pump Gear , Consists Of : , Gear ( Driven ) , Gear ( Drive Shaft ) , Oil Filter , Assy Oil Filter Complete ( Spinon ) , Lube Oil Filter-Spin On , Assy Oil Filter , Gasket ( Oil Filter To Cyl Block ) , Assy Oil Cooler , Gasket ( Cover On Oil Cooler ) , Gasket Washer ( Oil Cooler Cover ) , Sealing Washer 22X27 , Pressure Spring Pr Relief Valve , Screw Plug , Sealing Washer A 8X12 , Hex Screw M 8X20 , Gasket ( Assy Cooler On Cyl Block ) , Hex Fl Bolt M8x40 , Tc Oil Supply Line Assy , Pipe Union Bolt 10 M14x1.5 Ts16405 , Hose ( Tc Outlet To Cyl Crankcase ) , Assy Flange ( Tc Outlet To Oil Sump ) , Gasket Turbocharger Outlet , Hose Clamp ( 32 Dia ) , Adaptor Tc Oil Return , Low Oil Pressure Switch , Assy Piston Cooling Nozzle With Dowel Pin , Assy Relief Valve , Assy Water Pump , Housing, Water Pump , Cover , Back Cover , Pulley 3 Groove , Assy Fan , Spacer ( For Fan ) , Lock Plate , V-Belt ( Cogged ) 1280 Mm Length , Assy Thermostat Wjiggle Pins:83 Deg , Rubber Hose ( Thermostat To Radiator ) , Spring Band Clamp 47Dx12w , Rubber Hose ( Thermostat To Water Pump ) , Spring Band Clamp 30Dx12w , Assy Upper Cooling Water Line , Gasket ( Ucw Line ) , Screw M 8X20 , Temp. Transducer , Water Temp Sensor , Rubber Hose ( Cooling Water Line To Thermostat ) , Hose Clamp 50 , Water Pump Repair Kit ( Major ) , Consisting Of : , Sealing Member , Sliding Ring , Axle Slide Ring Seal , Cyclam Slide Ring Seal , Rubber Seal Ring , Taper Roller Bearing , Impeller, Plastic , Shaft , Oil Seal , Gasket Water Pump , Shim Thick , Gasket , Circlip A 28X2 ( Heavy Duty ) , Hub , Water Pump Repair Kit ( Minor ) , Consisting Of : , Sealing Member , Seal Sliding Ring , Oil Seal , Gasket Water Pump , Gasket Water Pump , Gasket Clutch , Circlip A 28X2 , Set:A / F, Pipes & Hoses , Assy Air Cleaner With Mtg.Bkt , Elem.Air Cleaner ( Primary ) , Elem.Air Cleaner ( Safety ) , Elbow Hose , T Bolt Type Hose Clamp-Tb 90 , Hose:Holset Tc , Reducer Elbow Hose , T Bolt Type Hose Clamp-Tb64 , Connector Pipe , Outlet Pipe, Bracket Assy , Assy Air Inlet Duct , Straight Hose , T Bolt Type Hose Clamp-Tb108 , Support , Service Indicator ( Enginetech ) , Adaptor , Nylon Tube 8 Odx6id , Rubber Buffer , Assy Bkt Dipstic Mtg , Clamp For Dipstic Mtg , Assy Bracket ( Bottom ) For Air Inlet Duct , Assy Bracket ( Top ) For Air Inlet Duct , Pulley ( Power Steering ) , Assy Pump Power Strg. ( Chinese ) , Bracket ( Pstrg Pump Mtg ) , V-Belt ( Cogged ) 980 Mm Length , Pulley:Cast ( For Zf Pstg ) , Assy Clamping Rod Complete , Clamping Piece , Clamping Nut , Pivot Pin , Bracket-Steering Pump ( On Cyl.Head ) , Assy Engine Mounting Front ( Lh ) , Assy Engine Mounting Front ( Rh ) , Cover Eng.Mtg.Front / Rh. , Tab Washer , Assy Rubber Support. , Washer , Engine Mountig Arm Right. ( Painted ) , Bracket Assy, Engine Mtg , Lifting Hook ( Rear ) , Set A - Ceekay Daikin , Assy Cover Plate 310 Dia. ( Reinforced ) , Driven Plate Assy 310 Dia. ( Reinforced ) , Set B- M / S Setco , 310 Dia. ( Reinf ) Clutch Cover Assy , 310 Dia. ( Reinf. ) Assy Clutch Disc , Clutch Housing ( 310Dia Cl ) :497Tcic Bs:Iii , Protective Cover ( Cl.Housing Front ) , Clutch Housing Lower Part ( 310Dia Cl ) , Clutch Cover Housing Upper , Pin , Assy Clutch Release Bearing With Sleeve , Clutch Release Bearing , Clutch Release Fork ( Reinforced ) , Ball Pin , Bracket, Inside , Assy Outer Race , Assy Bracket Outside , Rubber Bellow ( Clutch Release Fork ) , Cover ( Clutch Housing Silde ) , Cover ( Inspection Window ) , Gasket ( Inspection Window ) , Cover Diaphragm Sub Assy , Consisting Of : , Cover Plate , Clutch Cover Housing , Fulcrum Plate , Diaphragm Plate , Diaphragm Spring , Diaphragm Rivets , Kit For Strap And Rivets , Consisting Of : , Strap , Rivet ( Pressure Plate ) , Rivet ( Cover ) , Kit For Clutch Disc , Consisting Of : , Clutch Facings ( 310 Dia. ) , Facing Rivet , Assy Gear Box Comp.Gbs40-5 / 8.02W / 6Bcf , Gear Box Housing , Cylindrical Pin 10 H X 20 Is 2393 , Gasket ( Cover Front Lower ) , G.B.Hsg Cover Front Lower , Gasket ( Cover Front Top To Hsg ) , Gearbox Housing Cover ( Front Top-Nup Brg ) , Oil Slwinger ( Gb Hsg. Front Cover ) , Double Lip Oil Seal ( Serrated ) , Butting Ring Thick , Gear Case Cover Rear , Oil Seal ( Main Shaft ) , Assy Threaded Bush , Adapter , Oil Seal , Plug Speedo Drive , Shim Thick , Gasket ( Gear Case Cover Rear To Housing ) , Gear Case Cover Top ( Lower Half ) , Gasket ( Top Cover ) , Cyl Pin 10 H 8 X 20 Is 2393 , Stud , Pin Swing Lever , Pressure Relief Valve , Thrust Pin ( Reverse Indicator Switch ) , Pressure Spring ( Reverse Indicator Switch ) , Reverse Light Switch With Pigtail , Swing Lever Shifter Fork ( 1St Speed ) , Roller 2X13.8 , Washer , Pressure Piece For Check Plate , Pressure Spring For Pressure Piece , Slotted Plug , Interlocking Pin , Pressure Spring For Interlocking Pin , Sealing Plug M 24X1.5 , Assy Check Plate , Stopper Piece Check Plate , Support Piece Check Plate , Slotted Nut M 8 Ts 17412 , Spring Washer , Selector Shaft For First Speed , Selector Shaft ( 2 / 3 ) , Selector Shaft ( For Reverse Gear ) , Gear Shift Dog ( For First Gear ) , Selector Fork ( 2 / 3 ) , Selector Fork ( For 1St Speed Gear ) , Selector Fork ( For Reverse Gear ) , Pressure Spring , Steel Ball 11 Mm Dia. , Clamp ( Selector Shaft To Gear Box Housing ) , Locking Plate ( Selector Shaft To Gear Box Housing ) , Cover Top ( Upper Half ) , Needle Bearing , Shifter Fwinger , Selector & Shifter Shaft , Dowel Sleeve Heavy 10X40 , Oil Seal , Scraper Ring , Shifting Lever , Cap , Bellow , Hose Clip 25 , Gasket ( Between Upper & Lower Half ) , Pivot Pin , Intermediate Lever ( Rev. Gear ) , Sliding Key , Gear Box Gasket Kit Consists Of: , Gasket Front Cover Lower , Gasket Front Cover Upper , Gasket Rear Cover , Gasket Top Cover , Drive Shaft T=15, 497 ( Eng. ) , Compression Spring , Clamping Plate , Cylindrical Roller Bearing , Snap Ring Thick , Spacer On Drive Shaft , Oil Slwinger ( Front Side ) , Lock Nut Lh Thread , Roller Cage ( Longer ) 28X48x30.8 , Circlip ( Layshaft ) , Main Shaft ( Longer Pilot Bearing ) , Four Point Ball Bearing , Pressure Spring , Pin On Main Shaft , Butting Ring Thick , Butting Ring 8.00 Mm Thick , Synchronising Ring 5Th Speed , Synchronising Sleeve 4Th & 5Th , Synchronising Cone , Shifting Sleeve , Assy Helical Gear 4Th Speed , Double Row Needle Cage , Collar Bushing 44.6 Mm Long ( For Third Speed Gear ) , Roller Cage ( Double Row ) , Assy Helical Gear 3Rd Speed , Synchronising Ring 3Rd Speed , Synchronising Sleeve 2 / 3 , Synchronising Cone , Shifting Sleeve , Roller Cage ( Double Row ) , Helical Gear 2Nd Speed , Reverse Gear On Main Shaft , Shifter Sleeve 1St Speed , Collar Bushing 47.9 Mm Long , Gear Wheel 1St Speed , Gear Speedometer Drive W / Oil Slwinger , Shaft ( Speedo Drive ) , Speedo Gear ( Nylon ) , Coupling Flange ( 120 Od ) , Hex. Nut , Counter Shaft , 2Nd Gear ( T17 ) Counter Shaft , 3Rd Speed Gear Counter Shaft , 4Th Gear Counter Shaft , Constant Mesh Gear , Circlip A 52X2.5 Ts 17637 , Taper Roller Bearing , Reverse Idle Gear With Bush , Bush Reverse Idler Gear , Reverse Idler Gear Shaft , Plug Oil Filling , Magnetic Drain Plug , Synchro Kit Gbs 40 Consists Of : , Carrier 4 / 5 & 2 / 3 , Carrier 1St , Retention Pin 4 / 5, 2 / 3 , Retention Pin 1St , Comp. Spring , Assy Bkt.G.S.L.Mtg. ( For Power Stg.Veh ) , Assy Bracket ( For W / O Power Stg.Veh ) , Assy Gear Shift Lever ( With Bushes ) , Sub Assy G.S.Lever ( Upper & Lower Part ) , Sub. Assy Cup , Bush ( G.S.L.Ball Seat ) , Bush ( Shperical Seat G.S.Lever ) , Spacer , Bellow Holder , Retainer Plate , Spring Ring , Rubber Bellow , Spacer Gear Shift Lever , Assy Gearshift Lever Knob , Rubber Seal , Flap ( For Cab Version ) , Flanged Bolt ( With Serrations ) , Assy Bellow , Assy Turning Tube W / O Ball Joint , Assy Ball Joint , Hex Thin Nut M18x1.5 , Hex Bolt ( Turning Tube To Gs Lever ) , O-Ring 10X2 A Nitrile ( Turning Tube To Gs Lever ) , Link Rod , Assy Ball Joint Lh Threads , Assy Ball Joint Rh Threads , Hex Thin Nut M12x1.25 , Assy Bracket , Assy Clutch Pedal Complete , Sintered Bush , Spacer , Rubber Cover , Assy Support Complete ( Clutch ) , Torsion Spring , Clutch Master Cylinder ( 19.05 Dia ) , Clutch Pedal Pin , Bush ( Clutch Pedal ) , Clutch Booster Assy ( 90 Dia ) , Rubbe Stopper , Assy Connecting Line , Pipe Union Bolt , Sealing Washer 12X15.5 Is3175 Al , Assy Hose , Assy Tube , Assy High Pressure Hose , Thrust Ring , O-Ring 12.37X2.62 Ts16220 , Socket , Assy Bracket ( Clutch Booster. ) , Bracket ( Clutch Booster Support ) , Assy Push Rod , Assy Brake Pedal Complete , Sintered Bush , Rubber Cover , Sleeve , Hex Bolt M10x140 Is1364p1-8.8-Ss8451-8C , Brake Pin , Torsion Spring , Assy Fluid Container , Dual Brake Valve With Bias , Purge Tank ( Suitable For Voss ) , Repair Kit ( Major ) Clutch Master Cylinder , Minor Kit Clutch M / Cyl , Crimping Sleeve , Seal , Push Rod , Fork , Circlip , Rubber Bellow , Repair Kit ( Minor ) Clutch Master Cylinder , Valve Seal , Spring Washer , Spring , Gland Seal , Circlip , Rubber Bellow , Crimping Sleeve , Assy Major Repair Kit ( 90 Dia Booster ) , , Consisting Of :- , Gasket , Air Proof Gasket , Banjo Bolt , O Ring , Rubber Pipe , Seal , Air Seal , Seal , Cup Seal , Spring , Washer , Gaiter , Hydraulic Piston , Circlip , Spring Clip , Valve Poppet , Assy Minor Repair Kit ( 90 Dia Booster ) , , Consisting Of :- , Gasket , Air Proof Gasket , O Ring29 X 3.4 , Seal , Air Seal , Seal , Cup Seal , Spring , Circlip , Accl Pedal Module , Hex Fl Scr M6x18 , Nyloc Nut M6 , H / Fl Screw M8x18 , Bracket ( Accl. Pedal Mtg. ) , Assy Frame ( Lpk - / 27 Ex ) , Assy Cross Member ( With Towing Hook ) , Pin , Cross Member Front , Reinforcement - Rh ( Front Spg. Front Bkt ) N , Reinforcement - Lh ( Front Spg.Front Bkt ) , Assy Front Bracket ( For Front Spring ) , Bracket Assy, Engine Mtg , Assy.Reinforcement , Assy Bracket ( Front Brake Hose Mtg. ) , Assy Front Spring Bracket ( Rear ) , Assy Support Lh ( Eng. C.M. - Rear ) , Assy Support Rh ( Eng. C.M. - Rear ) , Reinforcement - Rh , Reinforcement - Lh , Assy Bracket ( Bump Stop Frt. Spring ) , Bracket , Engine Cross Member ( Rear ) , Assy Cross Member , Reinforcement -Rh ( Top ) , Reinforcement -Lh ( Top ) , Reinforcement -Rh ( Bottom ) , Reinforcement -Lh ( Bottom ) , Assy Cross Member ( Rsb Front ) , Spacer ( Rear Spring Bkt. ) , Spring Hanger Bracket ( Rear ) , Slide Support Rear Spring Front , Slide Support Rear Spring Rear , Assy Cross Member ( Rr Sh. Absorber ) , Reinforcement Assy , Reinforcement ( Rh ) Near 7Th Cm , Reinforcement ( Lh ) Near 7Th Cm , Assy Cross Member ( Rear Spring Rear ) , End Cross Member , Assy Air Deflector , Front Underrun Protective Device ( Fupd ) , Assy Beam Fupd , Assy Support Bracket ( Rh ) , Assy Support Bracket ( Lh ) , Tube , Washer , Hex Bolt ( M12x1.5X150 ) , Assy Front Spring ( Normal Camber ) , Assy First Leaf With Bushes ( Normal Camber ) , Bush , Second Leaf ( Normal Camber ) , Third Leaf ( Normal Camber ) , Fourth Leaf ( Normal Camber ) , Fifth Leaf ( Normal Camber ) , Sixth Leaf ( Normal Camber ) , Seventh Leaf ( Normal Camber ) , Eighth Leaf ( Normal Camber ) , Ninth Leaf ( Normal Camber ) , Tenth Leaf ( Normal Camber ) , Eleventh Leaf ( Normal Camber ) , Twelveth Leaf ( Normal Camber ) , Spring Clip ( Normal Camber ) , Spring Clip ( Normal Camber ) , Centre Bolt ( Extended Head ) Front Spring , Assy Front Spring ( Higher Camber ) , Assy First Leaf With Bushes ( Higher Camber ) , Bush , Second Leaf ( Higher Camber ) , Third Leaf ( Higher Camber ) , Fourth Leaf ( Higher Camber ) , Fifth Leaf ( Higher Camber ) , Sixth Leaf ( Higher Camber ) , Seventh Leaf ( Higher Camber ) , Eighth Leaf ( Higher Camber ) , Ninth Leaf ( Higher Camber ) , Tenth Leaf ( Higher Camber ) , Eleventh Leaf ( Higher Camber ) , Twelveth Leaf ( Higher Camber ) , Spring Clip ( Higher Camber ) , Centre Bolt ( Extended Head ) Front Spring , Assy Shackle With Bush , Bush , Spring Pin , Assy Sealing Ring , Locking Plate , Grease Nipple Am8x1 , Rubber Buffer ( Front ) , Hex Nut M 16X1.5 , Caster Plate , U - Clamp , Guide Plate ( Cast ) Front , Assy Front Shock Absorber , Bush ( Front Shock Absorber ) , Assy Front Shock Absorber Bracket , Washer , Nyloc Nut M 16X1.5 , Bracket Bottom ( Front Shock Absorber Mtg. ) , Hex Bolt M 12X1.5X52 , Tab Washer 13 , Assy Rear Spring With Aux. Spring , Assy First Leaf With Bushes , Bimetallic Spring Bush - 22 Dia , Second Leaf ( Main Spring ) , Third Leaf ( Main Spring ) , Fourth Leaf ( Main Spring ) , Fifth Leaf ( Main Spring ) , Sixth Leaf ( Main Spring ) , Seventh Leaf ( Main Spring ) , Eighth Leaf ( Main Spring ) , Support Plate ( Rear Spr. Assy With Aux.Spr ) , First Leaf ( Aux. Spring ) , Second Leaf ( Aux. Spring ) , Third Leaf ( Aux. Spring ) , Fourth Leaf ( Aux. Spring ) , Fifth Leaf ( Aux. Spring ) , Sixth Leaf ( Aux. Spring ) , Seventh Leaf ( Aux. Spring ) , Spring Clip , Spring Pin , Assy Sealing Ring , Locking Plate , Hex. Screw M 8X16 , Grease Nipple , Assy Shackle With Bush , Bimetallic Spring Bush - 22 Dia , Assy Rubber Buffer , Guide Plate Cast , U Bolt For Rear Leaf Spring Assy , Hex. Nut M 16X1.5 , Spherical Washer , Assy Rear Shock Absorber , Washer , Hex Bolt M 16X1.5X125 , Nyloc Nut M 16X1.5 , Assy Front Axle With Brakes , Front Axle Beam ( Std ) , Cotter Pin , Hex Nut M 12 , Assy Stub Axle With Bush Std , Seal Race ( Stub Axle ) , Steering Bush , Thrust Washer , Split Nut , Cap Screw M 10X25 , Washer , Dust Cap , Grease Nipple Am8x1 , King Pin Cap , Sealing Ring , Internal Circlip 40X1.75 N , King Pin ( Std ) , Thrust Bearing ( Normal ) , Thrust Bearing ( Std ) , Shim Thk. , Oil Seal , Spacer ( Between Bearings ) , Taper Roller Bearing ( Frnt.Hub Inner ) , Shim Thk. , Brake Drum , Front Hub , Hub Pin Front , Taper Roller Bearing , Hub Cover Front , Tie Rod Arm ( Lh ) , Tie Rod Arm ( Rh ) , Steering Arm Rh , Assy Tie Rod , Assy Ball Joint L.H , Assy Ball Joint R.H. , King Pin Minor Kit - - , Consists Of: , Cotter Pin , Spring Washer B - 12 , Hex Nut M - 12 , Internal Circlip , Assy Cap, Ring & Grease Nipple , Repair Kit King Pin - -Std Full , Consists Of: , King Pin -Std. , King Pin Bush , Thrust Bearing , Thrust Pad , King Pin Pair -Std , King Pin Set Minor Kit -Std , King Pin Minor Kit - - , King Pin Unit Minor Kit & Bush -Std , King Pin -Std. , King Pin Bush , King Pin Minor Kit - - , Assy Fa Brk Rh With Dust Cover , Assy Fa Brk Lh With Dust Cover. , Spider Front Lh , Spider Front Rh , Assy Chamber Mtg. Bracket Lh , Assy Chamber Mtg. Bracket Rh , Cam Shaft Lh , Cam Shaft Rh , Oil Seal , Bush ( Bronze ) , Sleeve ( Delrin ) , Shim , Circlip , Brake Lining Set Std.Kit , Brake Lining Set Os1 Kit , Brake Lining Set Os2 Kit , Roller , Spring Pull Off ( Cam End ) , Spring Pull Off ( Fulcrum End ) , Fulcrum Pin , Drum Brake Bush Fulcrum , Dust Cover Front ( Bottom ) , Dust Cover Front ( Top ) , Grommet , Collered Pin , Pin , Hex Bolt ( Strg. Arm Rear Side ) , Hex Bolt ( W / O Strg. Arm Side ) , Hex Bolt ( Strg. Arm Front Side ) , Assy Rear Axle Ra-1068 Comp W / S-Cam Brks33 / 8 , Assy Rear Axle Beam W / Pressure Ring Dowelstuds. , Assy Rear Axle Beam Machined ( Ra 1068 ) -Bus , Pressure Ring , Stud , Cyl Pin , Assy Carrier Housing Comp ( 33 / 8 ) W / Diff. , Bright Washer , Spring Washer , Hex Nut M10 , Hex Thin Nut M10 , Collar Scr M12x70 , Assy Rear Hub Comp ( W / O Abs ) , Rear Hub ( Ra 1068 ) , Hub Pin , Taper Roller Bearing ( Hub Inner 75X125x37 ) , Tapered Roller Brg , Spacer Ring For Hub Inner Oil Seal , Hub Inner Seal ( 100 X 125 X 12 ) , Oil Seal ( Hub Outer ) , Oil Catcher ( Ra 1068 ) , Spacer ( Between Rear Hub Bearing ) , Shim Thk , Shim 1.5 Thk , Spacer ( Oil Seal Mtg ) , Hub Locking Nut , Tongue Spacer ( With Holes ) , Spring Washer B8 Is3063 Ss8451-8C , Hex Screw M8x18 , Gasket ( Betn Rear Hub & Axle Shaft ) , Rear Axle Shaft ( Ra 1068 ) , Serrated Hex Bolt ( Axle Shaft To Hub ) , Pressure Relief Valve , Magnetic Drain Plug ( Allen Type ) , Assy Carrier Housing ( Ra 1068 ) , Cyl Pin 6H8x16 , Boltplummer Block Cover , Differential Threaded Ring , Dowel Sleeve Heavy 6X24 , Adjusting Pin , Hex Thin Nut M18x1.5 , Depth Setting Shim 0.1 Thk ( Between Carrier Hsg ) , Assy Crown Wheel & Pinion33 / 8Spirac , Spring Washer B10 , Screw M10x30 8.8 , Tail Pinion Nose Bearing ( 35X72x23 ) , Taper Roller Brg ( 54X124x36.5 ) , Spacer ( Bet.Hyp.Pinion Brgs. ) , Pinion Bearing Preloading Shim Thk , Pinion Bearing Preloading Shim Thk , Pinion Housing ( Cast ) , O Ring , Oil Slwinger ( For Tail Pinion ) , Spacer ( Bet.Pinion Brg.& Flange ) , Oil Seal Housing ( Tail Pinion ) , Oil Seal ( Rear ) Cr Seals ( 58X75x11 ) , Dust Seal ( Mechanical ) , Assy Coupling Fange ( 130 Od ) , Coupling Flange ( 130 Od ) , Hex Nut ( Tail Pinion Coupling Flange ) , Differential Housing Assy ( Ra 1068 ) , Serrated Bolt ( M12x1.75X55 ) , Diff.Bevel Pinion , Rear Axle Shaft Gear , Spherical Washer , Thrust Washer Rear Axle Shaft Gear , Thrust Washer 2.05 Thk , Differential Spider , Taper Roller Bearing ( 70X115x29 ) , Assy Rear Axle Brake Rh W / Dust Cover , Assy Rear Axle Brake Lh W / Dust Cover , Spring Washer , Hexbolt M14x1.5X45 , Hex Nut M14x1.5 , Brake Chember Assy Mtg Bkt Rh , Rear Brake Chember Mtg Bkt Lh , Cam Bush , Oil Seal B32x45x7 , Grease Nipple Am8x1 , Slack Adjustor Lh 16 Mm Offset , Automatic Slack Adjuster Rear Lh Mei , Slack Adjustor Rh 16 Mm Offset , Autimatic Slack Adjuster Rear Rh-Mei , Anchor Bracket-Rh , Anchor Bracket-Lh , Spacer , Shim , Nyloc Nut M8 , Rear Brake Drum , Spring Brake Actuator ( T-12 / 12 ) Scl-Voss , Anchor Bracket-Front , Assy Rear Axle Brake Rh W / Dust Cover , Assy Rear Axle Brake Lh W / Dust Cover , Torque Plate , Rear Camshaft Lh , Rear Camshaft Rh , Kit Bush Assy , Consists Of : , Bush , Bush Fulcrum , Oil Seal , Circlip , Washer , Shim , Washer , Spring-Abutment End , Spring-Cam End , Grease Nipple , Dust Cover Top , Dust Cover Bottom , Bush ( Bronze ) , Drum Brake Bush Fulcrum , Oil Seal , Roller , Fulcrum Pin , Spring Pull Off-Cam End , Spring-Fulcrum End , Grommet , Assy Brake Shoe With Af235 Liner , Brake Lining Set Std.Kit , Brake Lining Set Os1 Kit , Brake Lining Set Os2 Kit , Assy Wheel Rim6.00Gx16 , Assy Wheel Nut , Assy Spare Wheel Carrier , Reinforcement , Propeller Shaft Assy;Rear , Flange Yoke Full Rnd , Uj Kit , Slip Yoke Assy , Propeller Shaft, Seal , Propeller Shaft, Seal Guard , Cross Assy , Flange Yoke Full Rnd , Propeller Shaft Assy Guard , Bolt , Locking Plate , Double Socket , Sealing Washer 22X27 Is3175 Al , Assy Metal Pipe With Crimped Teflon Hose , Assy Metal Pipe Second From Comp To Ddu , Assy Metal Pipe Third From Comp To Ddu , Ddu Hi Prvoss Portwo Cntl Port-120Mm , Nylon Pipe , Assy Mag.Valve ( Ex.Brake ) W / Voss , Nylon Pipe , Sub Assy Air Tank-110 Strap Centre Dist , Assy Strap , Pin , Spacer Block , Drain Valve With Filter , Thrust Ring , O-Ring 20.30X2.62 Ts16220 , Nylon Pipe , Dual Brake Valve With Bias , Nylon Pipe , Quick Release Valve ( 3 Port Voss ) , Bracket For Quick Release Valve , Nylon Pipe , Lock Nut M18x1.5 , Assy Hose 3 / 8With O-Ring & 490Mm Length , Front Brake Chamber , Assy Slack Adjuster Straight , Anchor Bracket-Front , Shim , Spacer , Collared Pin , Pin , Hex. Bolt ( Stg. Arm Rear Side ) , Hex. Bolt ( W / O Stg. Arm Side ) , Hex. Bolt ( Stg.Arm Front Side ) , Nylon Pipe , Auto.Load Sensing Valve , Bracket Lcrv Mtg , Assy Pull Rod ( For M / S.Scl L.C.R.V. ) , Assy Bracket ( Lcrv Pull Rod ) , Voss Connector M16x1.5 ( Ng8m16 ) -Lcrv Del.Port , Nylon Pipe , Rg2 Relay Valve Delivery Port Metric , Bracket ( Relay Valve Mtg. ) , Nylon Pipe , 3 / 8Hose Assy With Oring Nipple 615Lg , Double Socket , Spring Brake Actuator ( Type-12 / 12 ) , Automatic Slack Adjuster Lh , Mei Automatic Slack Adjuster Rear Lh , Automatic Slack Adjuster Rh , Mei Autimatic Slack Adjuster Rear Rh , Assy Hose 3 / 8With O-Ring & 490Mm Length , Graduated Hand Control Valve , Nylon Pipe , Bracket ( Hose Mtg Rear ) , Assy Bracket ( Front Brake Hose Mtg. ) , Assy Nylon Pipe Set Chassis Comp. , Assy Nylon Pipe Set Cab Compl. , Assy Type 14 Brake Chamber M / S.Scl , Diaphragm ( Type 14 ) , Spring Brake Actuator ( Type-12 / 12 ) , Repair Kit ( Type12 / 12 Sba ) , Consists Of : , Bearing , Dust Seal , Elbow , Knurl Pin , Gaiter , Tube ( Spring Brak Accuator ) , Check Valve , Sealing Ring , Diaphragm , Split Pin , Sealing Ring , Retainer Ng-12 , Sealing Ring Ng12 , Washer , Spring Element Ng12 , Grease Sachet , Seal , Ddu Hi Pr, Voss Port, Wo Cntl Port120mm , Repair Kit Drying & Distribution Unit Hi Pr Voss ( Scl ) , Dessicant Cartridge , Filter , Spring , Valve Seat , Spherical Valve , Silencer Assy , Gasket , Sealing Ring , Valve , Spring , Diaphragm , Lip Seal Assy , Special Washer , Cap , Gasket , Bonded Valve , Inlet Valve Spring , Diaphragm , Exhaust Flap , Sealing Ring , Spherical Valve , Ng12 Retaining Clip , Ng8 Spring Element , Spring Element , P2c Fitting , Grease Sachet , Dual Brake Valve With Bias , Repair Kit ( Msp6 / 23 ) Dual Brake Valve , Consists Of: , Boot , Spring Seat , Sealing Ring , Valve , Spring , O Ring , Sealing Ring Ng12 , Spring Element Ng12 , Filter-Dual Brake Valve , Bottom Cover , Mesh , Rubber Spring , Sealing Ring Ng8 , Spring Element Ng8 , Guide Ring , Retaing Clip Ng12 , Retaing Clip Ng8 , Sealing Ring Ng12 , Sealing Ring Ng8 , O Ring , Grease Sachet , Quick Release Valve ( 3 Port Voss ) , Repair Kit Quick Release Valve , Consists Of: , Sealing Ring , Diaphragm , Grease Sachet , Auto.Load Sensing Valve For Voss , Repair Kit For Automatic Load Sensing Valve, , Consists Of: , Sealing Ring , Bonded Valve , Retaing Clip , Diaphragm Disc , Diaphragm , Seal , Dust Seal , Split Pin , Split Bush , Sealing Ring Ng12 , Spring Element Ng8 , Grease Sachet , Rg2 Relay Valve- Delivery Port Metric , Repair Kit ( Relay Valve ) , Consists Of : , Sealing Ring Ng8 , Retaing Clip Ng8 , Spring Element Ng8 , Sealing Ring , Retaing Clip Ng12 , Spring Element Ng12 , Valve , Valve Spring , Sealing Ring , Silencer Assy , Valve Guide , Sealing Ring , Sealing Ring Ng8 , Filter , Graduated Hand Control Valve , Repair Kit Graduated Hand Brake Valve, , Consists Of: , Valve , Sealing Ring , Valve Spring , Filter , Strainer Plate , Washer , Shim , Sealing Ring , Tension Pin , Gaiter , Spring , Ng8 Retaining Clip , Ng8 Spring Element , Ng12 Retaining Clip , Split Pin , Spring Element , P2c Fitting , Grease Sachet , Assy Column W / O Steering Wheel W / Spindle , Assy Steering Column , Assy Steering Spindle Top , Circlip 20X1.2 N , S.R.D.G. Ball Bearing , Spacer , Spring Seat , Compression Spring , Spring Seat Cup , Assy Universal Joint , Bolt. , Assy Steering Wheel ( 420 Dia.Gray ) , T Emblem , Assy Strg. Spindle , Steering Spindle Bottom , Rubber Bellow , Clamping Ring , Pitman Arm , Assy Drag Link Rhd , Ball Joint End Assy, Rh , Rubber Bellow ( Floor ) , Power Steering Pipe Lines , Assy Pipe ( Res. Tank To Pump ) , Hose Clamp 35 , Banjo Body , Banjo , Assy Pipe ( Pump To Gear Box ) , Assy Pipe Return Line ( G.B To Res.Tank ) , Assy Male Adaptor , Assy. Steering Gear Box Mtg. Bkt ( Rhd ) , Set A ( Optional Set B ) , Banjo Body , Sealing Washer 16X20 Is3175 Cu , Set B ( Optional Set A ) , Elbow ( M16x1.5 ) , Lock Nut M16x1.5 Is10410 Ss8451-8C , Sealing Ring Assy , Set C ( Optional Set D ) , Elbow ( M18x1.5 ) , Lock Nut M18x1.5 Is10410 Ss8451-8C , Thrust Ring , O-Ring 17.12X2.62 , Set D ( Optional Set C ) , Banjo Body , Banjo M18x1.5 Ts 16408 , Sealing Washer 18X22 Is3175 Cu , Power Steering Components M / S Zf , Plastic Oil Tank With Bracket Assly ( Zf ) , Assy Steering Gear Box ( Zf ) Rh , Assy Strg.Pump-Zf , Power Steering Components ( Chinese ) , Plastic Reservoir Assy , Assy Power Strg Gear Box-Rh ( Chinese ) , Strg Pump Assy Complete ( Hubei Triring ) , Assy Strg.Pump-Zf , Pump Seal Kit, Zf , Consisting Of : , Oil Seal , O Ring , Support Ring , Protecting Sealing Ring , Assy Power Steering Gear Box ( Zf ) , Rh , Seal Kit ( Power Steering Gear Box ) , Dust Seal , Support Ring , Sealing Ring , Sealing Nut , O Ring , Protective Cap , Gasket , Assy Power Steering Hydraulic Tank ( Zf ) , Assy Filter , Assy Power Strg Gear Box-Rh ( Chinese ) , Major Spare Part Kits , Dust Cover For Input Shaft , Dirt And Water Seal , Retaining Ring , Oil Seal Assy , Sealing Ring For Input Shaft , O Ring For Input Shaft , O Ring For Valve Housing , Thrust Needle Roller Bearing , Sealing Ring For Valve Sleeve , O Ring For Valve Sleeve , O Ring For Worm Shaft , Sealing Ring For Worm Shaft , Sealing Ring For Rack Piston , O Ring For Rack Piston , Rectangular Seal For Ball Pipe Clamp , Sealing Nut , Sealing Ring , High Pressure Sealing Ring , Side Cover Washer , O Ring For Housing , Sealing Nut , Rubber Cover For Preventing Dust , Tab Washer / Locking Plate , Housing Assy , Needle Roller Bearing , Housing , Sealing Ring , High Pressure Sealing Ring , Valve Housing Assy , Retaining Ring , Dirt And Water Seal , Oil Seal Washer , Oil Seal Assy , Sealing Ring For Input Shaft , O Ring For Input Shaft , Taper Screw Plugs , Valve Housing , Input Shaft, Worm Shaft And Valve Assy , Sealing Ring For Valve Sleeve , O Ring For Valve Sleeve , Valve Sleeve , Input Shaft , Pin , O Ring For Screw Shaft , Sealing Ring For Screw Shaft , Torsion Bar , Driving Ring , Worm Shaft , Pin , Holding Device , Worm Shaft Plug , Piston Assy , Unloading Valve Socket , Unloading Valve Pole , Compression Spring , Nylon Pole , Rack Piston , Sealing Ring Piston , O Ring For Piston , Sector Shaft Assy , Holding Device For Sector Sht , Adjusting Screw , Sector Shaft Plug , Sector Shaft , Side Cover Assy , Needle Roller Bearing , Housing Cover-Side Cover , Sealing Ring , High Pressure Sealing Ring , Assy Pump Power Strg. ( Chinese ) , Major Repair Kit For Small Pump-Chines , Oil Seal 15286 , O-Ring 131.5G , O-Ring 662G , Rotor , Vane , Cam Ring , O-Ring 152G , O-Ring 121.5G , O-Ring 9.51.5G , Front Oil Plate , Back Oil Plate , Minor Repair Kit For Small Pump-Chines , Oil Seal 15286 , O-Ring 131.5G , O-Ring 662G , O-Ring 152G , O-Ring 9.51.5G , O-Ring 121.5G , Plastic Reservoir Assy , Repair Kit For Reservoir , Consists Of: , O Ring Filter Element Top , Top Cover Seal Ring , Cap Seal , Baffle Cap Seal , Seal Oil Filter Bottom , Filter Element Assy , Assy Fuel Tank Comp With Strap & Support , Assy Fuel Tank Complete ( W / O Strap & Sup ) , Sealing Washer 38X44 Al , Assy Fuel Tank Cap , Tank Unit , Assy Bracket ( Fuel Tank Mtg ) , Assy Strap , Rubber Packing , Hose Clip 17 Ts17669 , Assy Suction Line ( Tank To Strainer ) , Pipe Union Bolt 10 M14x1.5 Ts16405 , Assy Suction Line ( Strnr To Feed Pump ) , Assy Return Line ( Fip To Long Member-Lh ) , Assy Return Line ( Long Member- Fuel Tank ) , Assy Pipe Union Bolt , Fuel Strainer , Assy Clamp , Sealing Washer 14X18 Is3175 Al , Assy Front Exhaust Pipe , Sealing Flange , Assy Mag.Valve ( Ex.Brake ) W / Voss 12V , Assy Exhaust Brake Unit. , Gasket , Assy Bracket. , Pin , Assy Silencetr ( With Tailpipe ) , Assy Mounting Strap ( Nt6 Silencer ) , Assy Plate With Hook ( Silencer Mtg. ) , Rubber Hanger. , Assy Bracket ( Silencer Mtg.Top ) , Assy Plate With Hook , Assy Bottom Noise Shield Complete , Assy Bottom Noise Shield Rear , Bracket Assy , Assy Bracket , Bracket ( Noise Shield ) , Assy Radiator W / O Frame ( Vave Type ) -Alkraft , Assy Radiator ( Vave Type ) :Tata Toyo , Assy Radiator : No Loss Tank-Tata Toyo , Assy Radiator Mtg. Pad Bottom 50 Mm , Pressure Cap ( Tata Toyo ) , Drain Cock , Assy Radiator Frame , Assy Bracket Radiator Bottom Mounting , Assy Radiator Mtg. Pad Side , Radiator Mounting Bracket ( On Long Member ) , Fan Shroud ( 515 Dia Fan ) :497 Tcic Bs:Iii , Recovery Coolant Tank , Coolant Fill Pipe With Pressure Cap , Rubber Hose ( Coolant Fill Pipe To Radiator ) , Spring Band Clamp 55Dx12w , Rubber Hose ( Radiator To Water Pump ) , Hose Clamp ( 53 Dia. ) , Hose Clamp ( 72 Dia. ) , Hose ( No Loss Tank To Filler Pipe ) , Hose Clamp ( 16 Dia. ) , Hose ( T.Vent To Coolant Filling Pipe ) , Hose ( Coolant Filling Pipe To Rad Vent ) , Hose Clamp ( 18 Dia. ) , Support Plate For Coolant Filler Pipe , Assy Thermostat Wjiggle Pins:83 Deg:Nlt , Hose ( Ucw Line To Thermostat ) :Euro Iii , Hose Clamp ( 50 Dia. ) , Rubber Hose ( Thermostat To Water Pump ) , Spr. Bd Clamp 17Dx12w , Hose Clamp ( 50 Dia. ) , Spr. Bd Clamp 15Dx12w , Spr. Bd Clamp 14Dx12w , Assy Batt.Cable Ve 1.15Lg W / Cot 35Sq , Assy Batt.Cable -Ve 1.35Lg W / Cot 35Sq , Assy Batt.Carrier , Channel ( Battary Clamping ) , Clamping Stud , Assy Horn ( M26 ) With Pig Tail , Earth Strap , Assy Engine Lamp W / 12V Bulb , Head Lamp 1.3 Lh Clr Lens 12V , Head Lamp 1.3 Rh Clr Lens 12V , Assy Front Blinker Lamp-Lh-12V , Assy Front Blinker Lamp-Rh-12V , 4Ch Clr Lens Tail Lamp W / Bulb-Lh-12V , 4Ch Clr Lens Tail Lamp W / Bulb-Rh-12V , Assy Tail Lamp Bracket Rh-Rhd , Assy Tail Lamp Bracket Lh-Rhd , Steering Lock Cum Ignition Switch , Assy Cab Lamp ( With Bulb ) , Lamp 12V 10W M12 / 6 Ba15s , Wiring Harness Main , Wiring Harness Tail , Wiring Harness Parking -Mssl , Wiring Harness Pig Tail L.P.Sw.And B / F Bottle-Mssl , Wiring Harness Engine , Wiring Harness Roof , Wiring Harness Sensor , Wiring Harness Switch With Pto , Ecu, Ems Vp37 For Diesel Engine Euro-Iii , Boost Pressure / Temp Sensor , Water Temp Sensor , Engine Speed Sensor , Speed Sensor 12 / 24V ( 8 Pulse ) Espeedo , Water In Fuel Indicator , Fan Out Unit For Eiii Espeedo12v / 24V , Assy Seat Belt&Door Ajar Bepper , End Outline Marker Lamp , Head Lamp Levelling Switch , Double Contact Brake Switch , Assy Bracket ( For Fuse Box & Relay ) , Digital Hour Meter , Inst Cluster Espeedo Lpk912 1:0.76- Ms / . Minda , Fuel Gauge , Temperature Gauge , Air Pressure Gauge , Speedometer 0.76 Espeedo , Piano Switch Exhaust Brake On , Piano Switch ( Engine Lamp ) , Piano Sw. ( Power Take Off ) W / O Conn. , Combi Switch , Low Air Pressure Switch , Partially Fitted Cab W / O Electicals & Controls , Assy Body Shell Painted- ( Bare Cab ) , Assy Fender Complete Lh , Assy Fender Complete Rh , Assy Panel Corner Bottom Lh , Assy Panel Corner Bottom Rh , Assy Outer Panel Corner Comp. ( Front ) Lh , Assy Outer Panel Corner Comp. ( Front ) Rh , Assy Cover ( Grey ) -Lh ( Panel Outer Corner Front ) , Assy Cover ( Grey ) -Rh ( Panel Outer Corner Front ) , Assy Centre Flap , Assy Side Wall Complete Lh , Assy Side Wall Complete Rh , Assy Support Front ( Grill ) , Step Board. , Roof Panel Rhd , Assy Pvc Floor Mat-Rhd , Rubber Mould ( Windshield Glass 5.76 Thick ) , Windshield ( Tinted Band ) , Rubber Mould-Rear Window Keyless Prof. , Assy Rear Window Compt.With Tinted Glass , Assy Panel Inner W / S Bottom , Gusset ( Panel Inner W / S Bottom ) , Assy Panel Outer W / S Bottom , Dashboard Centre ( Grey Pigmented ) -Rhd , Reinforcement Middle-Lh , Reinforcement Middle-Rh , Assy Cross Member-Rhd ( D.B.Mtg. ) , Assy Suport ( D.B.Cross Member ) , Dashboard Lh ( Grey ) , Dashboard Rh ( Grey ) , Reinforcement ( Front ) , Assy Reinforcement Inside ( Glove Box ) , Assy Reinforcement Complete Inside Rhd , Assy Reinforcement ( Outside ) , Assy.Reinforcement ( Top ) , Assy Bracket Dash Board Mtg , Assy Glove Box ( Grey ) , Cover Dash Mounting ( Grey ) , Assy Bracket Dash Board Mtg , Assy Kit For Nacelle ( Grey ) , Nacelle Front , Nacelle Rear , Assy Bracket Lh , Assy Bracket Rh , Cover Clutch Bottle , Assy Ventilation Nozzle , Cover Centre ( Dark Grey ) , Speaker Grill , Garnish ( For Middle Defrost ) , Garnish ( For Side Defrost ) , Cover ( T -Emblem ) Dashboard Assy Door Shell-Lh , Assy Door Shell-Rh , Assy Hinge Top Lh ( Door ) , Assy Hinge Top Rh ( Door ) , Assy Hinge Bottom Lh ( Door ) , Assy Hinge Bottom Rh ( Door ) , Assy Guide Channel Lh , Assy Guide Channel Rh , Assy Dovetail Bottom ( Door ) , Dovetail Bottom ( Body Side ) , Cover Panel Inner ( Front Corner ) -Lh , Cover Panel Inner ( Front Corner ) -Rh , Velvet Channel , Assy Padding Door L.H. , Assy Padding Door Rh , Assy Door Pad Clip. , Holder Outer Sealing Rh ( Rear ) , Holder Outer Sealing Lh ( Rear ) , Assy Sealing Mould Rh ( Outer ) , Assy Sealing Mould Lh ( Outer ) , Assy Sealing Inner Lh , Assy Sealing Inner Rh , Magazine Pocket ( Grey ) Lh , Magazine Pocket ( Grey ) Rh , Grab_Handle_Door , Reflex Reflector ( Front Door ) , Weather Strip R.H. , Weather Strip L.H. , Protective Cover-Rh ( Door Inner Beading ) , Protective Cover-Lh ( Door Inner Beading ) , Door Lock Front Lh , Door Lock Front Rh , Assy Inner Handle , Assy Outer Handle Lh , Assy Outer Door Handle Rh , Link Lh ( Inner Handle ) , Link Rh ( Inner Handle ) , Link ( Pop - Up Knob ) Lh , Link Rh ( Pop-Up Knob ) , Knob ( Inner Lock ) , Link ( Outer Handle ) , Lever Lh ( Lock Cylinder To Latch ) , Lever Rh ( Lock Cylinder To Latch ) , Assy Striker ( Door Lock ) , Lock Kits , Kit For Locks , Consisting Of : , Assy Outer Door Handle Lh , Assy Outer Door Handle Rh , Assy Key , Assy Glove Box Lock , Steering Lock Cum Ignition Switch , Assy.Winding Regulator Lh , Window Regulator Lh , Assy.Winding Regulator Rh , Window Regulator Rh , Assy.Handle ( For Window Regulator ) , Assy Handle Window Winding , Door Glass Lh Tinted ( Light Green ) , Door Glass Rh Tinted ( Light Green ) , Holder ( Regulating Glass ) , Assy Door Strap Complete , Assy Centre Flap , Bottom Beading ( Centre Flap ) , Beading Front Panel , Beading ( Fire Wall ) , Assy Hinge ( Centre Flap ) , Assy Lock ( Centre Flap ) , Assy Stay Rod Complete , Bush C / Flap Stay Rod , Pin C / Flap Stay Rod , Assy Rubber Buffer , Assy Release Cable Complete ( Centre Flap ) , Assy Striker ( Centre Flap ) , Clamp Bonnet Stay Rod , Assy Grab Handle , Assy Centre Grill With T Emblem & Net - Grey , Assy Centre Grill With T Emblm & Net - Black , T-Emblem ( Mesh Center Grill Front ) , Assy Bazzle-Rh , Assy Bazzle-Lh ( Grey ) , Bracket ( Bazzle Mtg ) , Assy Cover Bazzle-Lh , Assy Cover Bazzle-Rh , Assy Cover Side-Lh ( Centre Flap ) , Assy Cover Side-Rh ( Centre Flap ) , Assy Cover Middle With Tataletters - Grey Colour , Assy Cover Middle With Tata C / Flap-Black Colour , Grill Side Lh, ( W / S ) , Grill Side Rh, ( W / S ) , Grill Middle , Packing Grill W / S Bottom , Spring Clip Inner Lining , Screw Grommet , Grab Handle , Assy Cover Lh ( Centre Flap Hinge ) , Assy Cover Rh ( Centre Flap Hinge ) , Assy Sunvisor Lh , Assy Sunvisor Rh , Assy Door Cladding -Lh , Assy Door Cladding -Rh , Assy Kit For Rvm With Frame-Lh , Assy Kit For Rvm With Frame-Rh , Assy Rear View Mirror-Lh , Assy Rear View Mirror-Rh , Bracket Top Lh. ( R.V.M. ) , Bracket Top Rh. ( R.V.M. ) , Sleeve ( For Frame R.V.M ) , Rubber Pad ( Bracket Top R.V.M ) , Bracket Bottom Lh. ( R.V.M. ) , Bracket Bottom Rh. ( R.V.M. ) , Cap For Rear View Mirror , Assy Wide Angle Mirror , Assy -Hd Bs-Iii Mascot , Assy Mascot Bsiii , Letter T , Letter A , Ex Decal ( Silver ) , Assy Sticker Turbo Intercooler , Cover Step Board , Assy Head Lamp Dome. , Assy Head Lamp Dome-Lh ( Rhd ) , Assy Knob , Retro-Reflective Tape ( White 1955 Lg ) , Wiper Motor 17Wh / P-Rhd-140-Mssl-Lucas , Assy Wiper Arm & Blade ( 550 Mm. ) Rhd-Bcs , Assy Wiper Arm , Assy Wiper Blade , Assy Bracket ( Wiper Motor Mtg. ) , Gasket ( Bracket To Fire Wall ) , Repair Kit For Accessories Wiper , Consisting Of : , Assy Wheel Box ( 58.13 Mm ) , Assy Link ( 792 ) , Assy Link ( 183 ) , Assy Wheel Box Co-Driver ( 45 Mm ) , Kit W / S Washer Unit Lhd 12V-Prabha , Consisting Of : , Assy Twin Self Nozzle , Tube ( 1750 Mm Long ) , Pump With Motor And Tank , Omega Clip , Assy Bracket W / S Washer Mounting , Assy Ventilation Nozzle , Duct Outer Lh ( W / S Bottom ) , Duct Outer Rh ( W / S Bottom ) , Duct Inner ( Wind Shield Bottom ) , Hose ( Ventilation ) , Elbow Duct Lh , Elbow Duct Rh , Assy Ventilation Grill ( Leg Room ) , Assy Bracket ( Elbow Duct Mtg. ) , Air Deflector ( Leg Room Ventilation ) , Assy Bumper Complete , Assy Support Lh ( Bumper Mtg ) , Assy Support Rh ( Bumper Mtg ) , Assy Bracket-Lh ( Bumper Mtg. ) , Assy Bracket-Rh ( Bumper Mtg. ) , Assy Reflex Reflector - White , Assy Cross Tube ( Torsion Bar ) Rhd , Serrated Bush Rh ( Cross Tube ) , Spacer Bush , Assy_Rubber_Bush ( Frt_Mtg ) , Mounting Bracket Bottom Lh Rhd ( Front ) , Mounting Bracket Bottom Rh Rhd , Torsion Bar , Adjuster Rh ( Torsion Bar ) , Shim , Special_Adjuster_Bolt , Assy Nutplate ( Front Mtg. ) , Assy Stay Complete , Assy Cab Mtg Mechanism ( Cab Side Lh ) , Assy Cab Mtg Mechanism ( Cab Side Rh ) , Pin ( Lock Mechanism ) , Assy Handle Mtg ( Cab Locking Mechanism ) , Assy Connecting Link Lh , Assy Connecting Link Rh , Assy Secondary Lock ( Locking Mechanism ) , Assy Mtg.Bracket Lh ( Chassis Side ) , Assy Mtg.Bracket Rh ( Chassis Side ) , Assy Tie Member ( Rear Mtg. ) Rhd Cowl , Washer , Assy Mtg. Hook ( Cab Locking Mech. ) , Plate ( Cab Locking Mechanism ) , Mounting Cup ( Cab Locking Mechanism ) , Rubber Mounting ( Upper ) , Assy_Rubber_Mtg_Lower_ ( Cablocking_Mechan , Spacer ( Rear Mounting ) , Bright Washer 17 , Spring Washer B8 Is3063 Ss8451-8C , Nyloc Nut M 16X1.5 , Assy Bracket Upper ( Chassis Side ) , Assy_Mtg_Pad ( Cab_Locking_Mechanism ) , Mudguard, Lh , Mudguard_Rh , Support ( Rear Mudgaurd Mtg. ) , Assy Support Bottom L.H. ( Mudguard ) . , Assy Support Bottom R.H. ( Mudguard ) . , Clamp Rear Mudguard Mounting , Sealing ( Rear Mudguard ) , Assy Kit For Mudflap-Lh , Assy Kit For Mudflap-Rh , Mud Flap Front Inner Lh-Rhd , Mud Flap Front Inner Rh-Rhd , Assy Mudflap Front Outer-Lh , Assy Mudflap Front Outer-Rh , Assy Mudflap Middle Inner W / Extn.Comp-Rh , Assy Mudflap Middle Inner W / Extn.Comp-Lh , Mudflap Rear ( Spray Suppression ) , Assy Bracket Bottom Lh ( Mud Flap Mtg ) , Assy Bracket Bottom Rh Mudflap Mtg , Assy Driver Seat With Head Rest-Rhd. , Assy Co-Driver Seat Complete-Rhd , Assy Seat Belt Kit Complete ( Passive ) , Seat Belt ( Middle Passenger ) , Seat Belt ( Co - Driver Side ) , Seat Belt ( Driver Side ) , Assy Bracket Bottom L.H.Seat Belt Mtg , Assy Seat Box Compl.Rhd ( Driver Seat ) , Cover ( Seat Belt Anchorage ) , Group ( B ) Machining Work Radiator Tank Repair , Chokup Radiator Cleaning , New Cylinder Liner Fitting To Engine Block , Cutting The Engine Crank And Make It According To The Size , Making Connecting Rod Bush Standard And Fitting , Camshaft Bush Cutting And Fitting , Cylinder Head Wall Guide Fitting , Surfacing The Head Cylinder , Fitting Cylinder Head Valve Seat , Fuel Injection Pump Overall , Fuel Injection Pump Repair , Fuel Injector Overall , Fuel Injector Repair , G.B Main Shaft Machining Of Gear Box , G.B Top Shaft Machining , Fitting Lining To The Clutch Plate , Flywheel Machining , Pressure Plate Machining , Fitting Joint Yoke To Propeller Shaft , Fitting Sleeve Shaft To Propeller Shaft , Fitting Of D.D Valve Repair Kit , Fitting Of Brake Valve Kit , Brake Drum Cutting , Fitting Of Kingpin Bush To Stub Axle , Removing Wheel Disc Out , Making A New Holes To The Wheel Disc , Removing Out Of Joint , Welding Of Crowning Teeth , Welding Of Pinion Teeth , Leaf Spring Set Cambering ( Spring Bending ) , Fitting Center Bolts , Removing Bend Of Front Axle , Rear Axle Bearing Slot Welding And Making Standard Size , Front Axle Bearing Slot Welding And Making Standard Size , Front Body Show Denting Work Of Vehicle , Side Body Show Denting Work Of Vehicle , Rear Body Show Denting Work Of Vehicle , All Vehicle Body Painting Work , Front Wind Shield Glass Fitting Of Vehicle , “D” Glass Fitting Of Vehicle , Repair Vehicle Carriage ( Houda ) , Realign Of Carriage Falaka , Cushing And Repairing Of Vehicle Seat’S , Wheel Alignment Of The Vehicle , Wheel Balancing Of The Vehicle , Overhauling Ofwater Pump , Repair Of Water Pump , Repair Of Brake Air Compressor , Group ( C ) Electrical Worksbattery Cell Repairing , Battery Charging , Starter Over Oiling , Starter Repairing , Alternator Over Oiling , Alternator Repairing , All Vehicle Wiring , Headlight Fitting , Wiper Repairing , A.C Repairing , A.C Gas Filling , A.C Overhauling , Fitting The Combination Switch , Group ( D ) Mechanical Work Fitting Of Radiator , Removing And Fitting The Fuel Injection Pump , Removing And Fitting The Fuel Injector , Removing And Fitting Water Pump , Removing And Fitting Cylinder Head , Engine Half Over Hauling Work , Engine Full Over Hauling Work , Front Axle Over- Hauling Work , Rear Axle Over- Hauling Work , Removing And Fitting Clutch Plate , Gear Box Over-Hauling Work , Propeller Shaft Over-Hauling Work , Crown- Pinion Over-Hauling Work , Steering Box Over-Hauling Work , Engine Oil Change Work , Engine Tune-Up Work , Group ( E ) Electrical Spars Partsstarter Armature , Starter Field Coil Set , Starter Solenoid Switch , Starter Brush Gear , Starter Bush Set , Starter Fork , Starter Bendex , Back Side Starter Casing , Front Starter Rocker Cover , Starter Armature Plate ( Front Casing ) , Starter Body , Starter Main Wire , Alternator Rotor , Alternator Stator , Alternator Cut-Out , Alternator Rectifier , Alternator Brush Set , Alternator Bearing , Alternator Upper Cover , Alternator Body , Alternator Setting Bolt , Alternator Pully , Alternator Foundation , Alternator Foundation Bolt , Wiper , Wiper Armature , Wiper Body , Wiper Brush Set , Wiper Brush Gear , Wiper Wheel , Wiper Arm , Wiper Bled , Wiper Mining Wheel Set , Wiper Setting Rod , Head Light Assembly ( Retail Accessories ) , Key Switch , Ignition Switch , Head Light Bulb , Head Light Button , 1141 Bulb , 67 No. Bulb , Backside Danger Light Assembly , Indicator Assembly , Brake Switch , Battery Terminal , Battery Clip , Starter Button , Pull Push Button , Horn Button , Horn , Lt Wire 4 Mm , Lt Wire 5 Mm , Lt Wire 8 Mm , Living Lamp Bulb , Press Clip , Insulation Tape , Plastic Tape , Cabin Fan , Fuse Set , Front Indicator , Mudguard Indicator , 11. Auto Electric Parts 4 St Relay 12V Make Autolek , 4 St Relay 12V Make Lucas , 4 St Relay 24V Make Autolek , 4 St Relay 24V Make Lucas , Aeb 10 Mfd 50V Capacitor , Aeb 10K Preset , Aeb 10K Volume Controller , Aeb 1176 Bulb 24V ( Single Point ) , Aeb 3 Core Cable Mint , Aeb 3 Core Wire , Aeb 3 Way Switch , Aeb Adapter 1X3.4 , Aeb Alternater Cutout Jcb Robot , Aeb Alternator 24V Lucas , Aeb Alternator Batti Holder , Aeb Alternator Bearing , Aeb Alternator Bearing Dost , Aeb Alternator Bearing Eicher , Aeb Alternator Bearing Js120 , Aeb Alternator Bearing Mjeep , Aeb Alternator Bearing Plate Lucas Maxximo , Aeb Alternator Belt Tata Mega Xl , Aeb Alternator Bolt 17 No. , Aeb Alternator Bolt Dost , Aeb Alternator Brush Dost , Aeb Alternator Coupler Tata Mega , Aeb Alternator Cut Out Mbhl , Aeb Alternator Cut Out Tata 207 , Aeb Alternator Cutout Eicher , Aeb Alternator Cutout Jcb 3Dx , Aeb Alternator Cutout Js120 , Aeb Alternator Cutout Mjeep , Aeb Alternator Fuse Mbhl , Aeb Alternator Katora Bearing , Aeb Alternator Oil Seal , Aeb Alternator Oil Seal Dost , Aeb Alternator Oil Seal Mjeep , Aeb Alternator Pipe , Aeb Alternator Pulli Tata 709 , Aeb Alternator Pully Key , Aeb Alternator Rectifire Plate Bhl , Aeb Alternator Rectifire Plate Eicher 3025 , Aeb Alternator Rectifire Plate Tata Mega , Aeb Alternator Repairing Bhl 3Dx , Aeb Alternator Repairing Eicher 1075 , Aeb Alternator Repairing Js120 , Aeb Alternator Repairing Mbhl , Aeb Alternator Rotter , Aeb Alternator Rotter Mahindra Maxximo , Aeb Alternator Slip Ring , Aeb Alternator Slip Ring Js120 , Aeb Alternator Slip Ring Mjeep , Aeb Alternator Stator Coil Js120 , Aeb Alternator Stator Soldering , Aeb Alternator Thhiya Tata Mega , Aeb Alternetor Brush Holder Screw A / L Comet , Aeb Altinator Belt Maxximo , Aeb Altinator Cutout , Aeb Altinator Cutout Dost , Aeb Altinator Cutout Eicher 1075 , Aeb Altinator Cutout Lucas Maxximo , Aeb Altinator Cutout Mint , Aeb Altinator Cutout Tata Ace , Aeb Altinator Katora Eicher 1075 , Aeb Altinator Oil Seal Eicher 1075 , Aeb Altinator Quil Mahindra Jeep , Aeb Altinator Repairing Dost , Aeb Altinator Repairing Mahindra Jeep , Aeb Altinator Rotter Bhl , Aeb Altinator Starter , Aeb Altinator Stator Coil Eicher 1075 , Aeb Altinator Tensioner Maxximo , Aeb Altrnator Rotter Seal , Aeb Ampere Meter ( 50X50 ) Small Ashok L / L Comet , Aeb Ampere Meter 24V ( 30-30 ) Js200 , Aeb Ampere Meter 30X30 Jeep , Aeb Armature , Aeb Armature ( Comstar ) Mint , Aeb Armature Bhl Jcb 3Dx , Aeb Armature Combitator , Aeb Armature Combitator 608 Lucas , Aeb Armature Cut Mjeep , Aeb Armature Cut Polish Tata Mega Xl , Aeb Armature Eicher 3025 , Aeb Armature Face Cut Mjeep , Aeb Armature Face Cut Tata 709 , Aeb Armature Face Cut Tata Di ( Old ) , Aeb Armature Js120 , Aeb Armature L&T Case , Aeb Armature Lucas Mega , Aeb Armature Nut Kit , Aeb Armature Rewinding , Aeb Armature Soldering , Aeb Batter Transmitter Innova , Aeb Battery Exide Deen 60 , Aeb Bendex ( Comstar ) Mint , Aeb Bendex Bosch Tata 207 , Aeb Bendex Eicher 3025 , Aeb Bendex Fitting Maxximo , Aeb Bendex Js30 , Aeb Bendex Kit Mahindra Maxximo , Aeb Bendex Lntbh , Aeb Bendex Lock Fitting , Aeb Bendex Lock Kit , Aeb Bendex Lock Kit Mahindra Maxximo , Aeb Bendex Lock Mahindra Maxximo , Aeb Bendex Lucas 24 V Js200 , Aeb Bendex Lucas Mbhl , Aeb Bendex Lucas Mega , Aeb Bendex Mahindra Tractor , Aeb Bendex Robot Vectra , Aeb Brush Bosch Mbhl , Aeb Brush Lucas Mahindra Tractor , Aeb Brush Mahindra Maxximo , Aeb Brush Mint , Aeb Brush Plate , Aeb Brush Plate 1613 , Aeb Brush Plate Bhl Jcb , Aeb Brush Plate Bolt Mega , Aeb Brush Plate Comstar Mint , Aeb Brush Plate Eicher 2016 , Aeb Brush Plate Js30 , Aeb Brush Plate L&T Case , Aeb Brush Plate Lntbh , Aeb Brush Plate Lucas Eicher 2016 , Aeb Brush Plate Lucas Mega , Aeb Brush Plate Mahindra Bolero , Aeb Brush Plate Mbhl , Aeb Brush Plate Mint Lucas , Aeb Brush Plate Tata Ace , Aeb Brush Robot Vectra , Aeb Brush Set Eicher 2016 , Aeb Brush Set Eicher 3025 , Aeb Brush Set Js120 , Aeb Brush Set Lntbh , Aeb Brush Set Lucas Eicher 2016 , Aeb Brush Ttractr , Aeb Bulb 1016 , Aeb Bulb 2441 , Aeb Bulb 67 No. , Aeb Bush Making Of Armature , Aeb Cabin Bulb Jeep Thar , Aeb Catcher , Aeb Chock Wire Eicher , Aeb Coil Resistor ( 5W ) , Aeb Combination Switch Bhl , Aeb Combination Switch Mjeep Thar , Aeb Combination Switch Tata Mega , Aeb Common Rail Coupler Mega , Aeb Common Rail Maxximo , Aeb Commonrail Servicing Dost , Aeb Condensor , Aeb Contact Patti , Aeb Cut In Armature , Aeb Diaphragm , Aeb Diode ( It 55258 6A02 ) , Aeb Door Indicator ( Lhs ) Eicher 2016 , Aeb Earthing Wire , Aeb Egt & Katora Complete Lucas Mega , Aeb Egt Bearing , Aeb Egt Bearing Tata 207 Di , Aeb Egt Bendex Fitting Eicher 1095 , Aeb Egt Bendex Fitting Maxximo , Aeb Egt Complete , Aeb Egt Complete Jeep Thar , Aeb Egt Complete Mahindra Bolero , Aeb Egt Complete Mint , Aeb Egt Complete Tata 207 , Aeb Egt Gear , Aeb Egt Gear Maxximo , Aeb Egt Gear Mega , Aeb Egt Katora Dost , Aeb Egt Katora Mahindra Bolero , Aeb Egt Katora Mint , Aeb Egt Lock ( Chand Wali ) Mint , Aeb Egt Lock Katori Fitting Eicher 1095 , Aeb Engine Starter Relay , Aeb Est Comstar Mint , Aeb Fan Bolt Robot , Aeb Field Body Complete Js120 , Aeb Field Body Eicher Terra 16 , Aeb Field Bolt Lift Mahindra Maxxmo , Aeb Field Bolt Soldering , Aeb Field Coil Eicher 2016 , Aeb Field Coil Fitting Jeep , Aeb Field Coil Jsb 3Dx , Aeb Field Coil Lucas Eicher 2016 , Aeb Field Coil Soldering , Aeb Field Coil Taping Cargo , Aeb Field Coil Ttractr , Aeb Field Wire Soldering , Aeb Filament Patta , Aeb Front Indicatortata 407 , Aeb Front Indicator ( Lhs ) , Aeb Front Indicator ( Lhs ) Eicher Terra 16 , Aeb Front Indicator ( Lhs ) Tata 207 , Aeb Front Indicator ( Rhs ) Mjeep , Aeb Front Indicator Cover Mjeep , Aeb Front Indicator Lhs+Rhs Eicher 10.75 , Aeb Fuse 05 Amp , Aeb Fuse 10 Amp , Aeb Fuse 15 Amp , Aeb Fuse 20 Amp , Aeb Fuse 250 Amp , Aeb Fuse 60 Amp , Aeb Fuse 80 Amp , Aeb Head Light ( Lhs ) Eicher Terra 16 , Aeb Head Light ( Lhs ) Mahindra Jeep Thar , Aeb Head Light Bajel Lhs , Aeb Head Light Bejal Eicher Terra16 , Aeb Head Light Dost , Aeb Head Light Eicher , Aeb Head Light Mahindra Supro , Aeb Head Light Maxximo , Aeb Head Light Mega , Aeb Head Light Ring Square Eicher 1075 , Aeb Head Light Tata 207 , Aeb Headlight Beam With Ring , Aeb Headlight Beem Ring , Aeb Headlight Cover , Aeb Headlight Cover ( Black ) Eicher Terra16 , Aeb Headlight Mahindra Backhoeloader , Aeb Headlight Mahindra Bolero Lhs+Rhs , Aeb Headlight Set Complete With Cover & Bulb , Aeb Heat Sink Paste , Aeb Heater Plug , Aeb Heater Plug Tata Ace , Aeb Hosing Bearing Eicher 1095 , Aeb Hosing Bearing Maxximo , Aeb Hosing Bolt Ashok Leyland , Aeb Hour Meter Digital , Aeb Hydro Meter , Aeb Indicator Bulb 1167 Bhl , Aeb Js200 16Mm Top , Aeb Led Bulb 1612 , Aeb Lift Cable ( 3-Core ) , Aeb Lift Motor Armature Face Cut Tata Mega Xl , Aeb Lift Motor Armature Soldering Mega Xl , Aeb Lift Motor Bearing Tata Ace , Aeb Lift Motor Field Coil Repairing Tata Mega Xl , Aeb Lift Motor Field Wire Dost , Aeb Lift Motor Repairing Tata Mint , Aeb Lift Solenoid Coil , Aeb Lift Solenoid Relay , Aeb Lift Solenoid Switch Dost , Aeb Lift Solenoid Valve Mega , Aeb Lift Solenoid Valve Mint , Aeb Lift Solenoid Valve Supro , Aeb Lift Switch Box Dost , Aeb Lift Switch Box Mega , Aeb Lock Katori , Aeb Lock Katori Bhl Jcb 3Dx , Aeb Lock Katori Lucas Mega , Aeb Lock Katori Lucas Mint , Aeb Lock Kit Lucas Maxximo , Aeb Lugs Fitting In Battery Wire , Aeb Lugs Soldering In Battery Wire , Aeb Magnet Coil Riksha , Aeb Main Coil Fitting Tata 709 , Aeb Main Line Switch , Aeb Main Line Switch Bhl , Aeb Main Line Switch Cargo , Aeb Main Line Switch Eicher 1095 , Aeb Main Line Switch Jeep Pijo540 , Aeb Main Line Switch Mahindra Maxximo , Aeb Main Line Switch Mega , Aeb Main Line Switch Mjeep , Aeb Main Line Switch Roller , Aeb Mastech Digital Meter , Aeb Mcb Roller , Aeb Mega Brush Plate , Aeb Mega Self Katora Lucas , Aeb Meter Bult Holder 709 , Aeb Meter Holder Massey Tractor , Aeb Micro Relay , Aeb Micro Relay Coupler Mega Xl , Aeb Micro Relay Holder , Aeb Milometer Coupler , Aeb Milometer Coupler Eicher Terra16 , Aeb Milometer Sensor , Aeb Milometer Sensor Maxximo , Aeb Mini Fuse 05 Amp , Aeb Mini Fuse 10 Amp , Aeb Mini Fuse 15 Amp , Aeb Mini Fuse 20 Amp , Aeb Mini Fuse 25 Amp , Aeb Mini Halogen Bulb Bhl , Aeb Mini Helogen , Aeb M-Seal ( Big ) , Aeb M-Seal ( Small ) , Aeb Mudguard Indicator Jeep Thar , Aeb New Alternator Bosch , Aeb New Alternator Ex100 Hitachi , Aeb New Alternator Lucas Maxximo , Aeb New Self 12V Tata Ace , Aeb New Self Bosch Eicher 1110 , Aeb New Self Eicher 20.16 , Aeb New Self Lucas Roller , Aeb New Self Lucas Tata Ace , Aeb New Self Mjeep , Aeb New Self Riksha , Aeb Number Plate Light Mahindra Jeep , Aeb On / Off Switch , Aeb Panel Switch Dost , Aeb Pendrive 16Gb , Aeb Pilot Bearing Tata Mega , Aeb Rear Indicator ( Lhs+Rhs ) Mjeep , Aeb Rectifier Plate Cargo , Aeb Rectifier Plate Dost , Aeb Rectifier Plate Jcb 3Dx , Aeb Rectifier Plate Mahindra Jeep , Aeb Rectifier Plate Maxximo , Aeb Rectifier Plate Mega , Aeb Rectifier Plate Tata Ace , Aeb Screw 1 / 2 , Aeb Search Light Bulb 24V , Aeb Search Light Js30 , Aeb Self 4St Relay ( 24V ) , Aeb Self Armature ( Lucas ) Riksha Alpha , Aeb Self Armature 1613 , Aeb Self Armature Bosch Eicher Terra 16 , Aeb Self Armature Bosch Lntbh , Aeb Self Armature Eicher 2016 , Aeb Self Armature Lucas Eicher 2016 , Aeb Self Armature Lucas Mint , Aeb Self Armature Mahindra Bolero , Aeb Self Armature Mahindra Tractor , Aeb Self Armature Tata 207 Di , Aeb Self Armature Ttractr , Aeb Self Bendex Bosch , Aeb Self Bendex Eicher 2016 , Aeb Self Bendex Jcb 3Dx , Aeb Self Bendex Lucas Mjeep , Aeb Self Bendex Mahindra Bolero , Aeb Self Bendex Mico Eicher 2016 , Aeb Self Bendex Mint Lucas , Aeb Self Bendex Tata 207 Di , Aeb Self Body , Aeb Self Body Stud Leyland Cargo , Aeb Self Body Stud Long Tata 1210 , Aeb Self Bolt Riksha , Aeb Self Brush Bhl , Aeb Self Brush Eicher Terra 16 , Aeb Self Brush Holder Riksha , Aeb Self Brush Mahindra Jayo , Aeb Self Brush Plate Eicher Terra 16 , Aeb Self Brush Plate Jeep , Aeb Self Brush Plate Riksha , Aeb Self Brush Plate Riksha Alpha , Aeb Self Brush Plate Tata 207 Di , Aeb Self Brush Riksha , Aeb Self Brush Tata Ace , Aeb Self Center Plate Tata 709 , Aeb Self Coupling Tata 1210 , Aeb Self Egt Eicher 1075 , Aeb Self Egt Gear Dost , Aeb Self Egt Katora , Aeb Self Egt Lucas Mega , Aeb Self Egt Mint , Aeb Self Field Bolt Soldering , Aeb Self Field Coil Lucas 24V 1613 , Aeb Self Hole Topping , Aeb Self Hosing Bosch Tata 207 Di , Aeb Self Hosing Comstar , Aeb Self Hosing Lucas , Aeb Self Hosing Lucas Jcb 3Dx , Aeb Self Hosing Lucas Tata Mega , Aeb Self Hosing Mahindra Bolero , Aeb Self Hosing Stud Remove , Aeb Self Hozing Bearing , Aeb Self Opening Fitting Tata 709 , Aeb Self Scew 4 Point ( 3 / 4 ) , Aeb Self Screw 1 , Aeb Self Screw 3 / 4 4 Point , Aeb Self Screw Beat , Aeb Self Solenoid Switch Eicher Terra 16 , Aeb Self Solenoid Switch Js120 , Aeb Self Solenoid Switch Lucas Eicher 1110 Pro , Aeb Self Stud Mega Xl , Aeb Self Stud Woisher , Aeb Self Top Katora , Aeb Self Top Plate Dost , Aeb Sholdering Iron , Aeb Soldering Wire , Aeb Soldering Wire Oswal 250 Gm , Aeb Solenoid Coil Eicher 50.25 , Aeb Solenoid Coil Js120 , Aeb Solenoid Quil Dost , Aeb Solenoid Quil Maxximo , Aeb Solenoid Relay 24V Tata 1613 , Aeb Solenoid Relay Ashok L / L Comet , Aeb Solenoid Screw Eicher 1110 Pro , Aeb Solenoid Switch ( Comstar ) Mint , Aeb Solenoid Switch Bhl , Aeb Solenoid Switch Coupler , Aeb Solenoid Switch Eicher 2016 , Aeb Solenoid Switch Eicher 3025 , Aeb Solenoid Switch Hmt Tractor , Aeb Solenoid Switch Js30 , Aeb Solenoid Switch Lock Patti Tata 207 , Aeb Solenoid Switch Lucas Mega , Aeb Solenoid Switch Lucas Mint , Aeb Solenoid Switch Mahindra Bolero , Aeb Solenoid Switch Mahindra Maxximo , Aeb Solenoid Switch Mbhl , Aeb Solenoid Switch Mico Eicher 2016 , Aeb Solenoid Switch Mjeep , Aeb Solenoid Switch Mtractor 475 Di , Aeb Solenoid Switch Robot Victra , Aeb Solenoid Switch Screw Dost , Aeb Solenoid Switch Screw Lucas Mega , Aeb Solenoid Switch Screw Lucas Mint , Aeb Solenoid Switch Tata 207 , Aeb Solenoid Switch Tata 207 Di , Aeb Solenoid Valve Dost , Aeb Solenoid Valve Mahindra Maxximo , Aeb Speaker Wire , Aeb Spindal Quarter Pin , Aeb Startin Relay Maxximo , Aeb Starting Switch Jcb 3Dx , Aeb Stator Coil , Aeb Sturd Mint , Aeb Tail Light ( 3 Chamber ) , Aeb Tail Light Assy. ( 03 Chamber ) Eicher 1059 , Aeb Tail Light Bhl , Aeb Tail Light Cover , Aeb Tail Light Mahindra Bolero , Aeb Tda 5200 Transistor , Aeb Temperature Meter , Aeb Temperature Tee ( Big ) , Aeb Temperature Tee ( Small ) , Aeb Temperature Tee Mahindra Supro , Aeb Temperature Tee Removing , Aeb Tempreature Coupler Maxximo , Aeb Tempreature Tee Coupler Mega , Aeb Tempreature Tee Dost , Aeb Tempreature Tee Mega , Aeb Tie Rod Quarter Pin , Aeb Top Katora Mint , Aeb Transfarmer 12012 Js120 , Aeb Transformer Ahuja ( Op 4202 ) , Aeb Transformer Repairing , Aeb Tube Light , Aeb Tube Light Complete L & T Case , Aeb Usb Board , Aeb Usb Socket , Aeb Wiper Blade Complete Bhl Jcb 3Dx , Aeb Wiper Machine Armature Rewinding Bhl Jcb 3Dx , Aeb Wiper Machine Bolt Bhl Jcb 3Dx , Aeb Wiper Machine Woisher Bhl Jcb 3Dx , Aeb Wiper Motor Repairing Bhl Jcb 3Dx , Aeb Wire Rope 8Mm , Aeb Zoric Spray , Alternatir Bearing Plate 407 Lucas , Alternator Assy. 407 Make Autolek , Alternator Assy. 407 Make Lucas , Alternator Assy. Cargo 909 L / L. Make Mico , Alternator Assy. Leyland Cometlucas , Alternator Assy. Leyland Comet Autolek , Alternator Bearing 6203 Maruti Make Skf , Alternator Bearing 6304 Leyland Skf , Alternator Brush Cargo 909 L / L. Mico , Alternator Brush Holder 407 .Make Autolek , Alternator Brush Holder 407 Make Lucas , Alternator Brush Holder Leyland Make Lucas , Alternator Brush Holder Maruti Lucas , Alternator Brush Leyland Comet Lucas , Alternator Brush Leyland Comet Make Autolek , Alternator Brush Tata 407 Lucas , Alternator Brush Tata 407 Make Autolek , Alternator Cutout 407 Make Autolek , Alternator Cutout 407 Make Lucas , Alternator Cutout Cargo 909 Bosch , Alternator Cutout Leyland Make Lucas , Alternator Cutout Maruti Make Lucas , Alternator Rectifire Plate 407 Make Autolek , Alternator Rectifire Plate 407 Make Lucas , Alternator Rottor 407 Make Autolek , Alternator Rottor 407 Make Lucas , Alternator Rottor Cargo 909 Make Bosch , Alternator Rottor Leyland Make Lucas , Alternator Rottor Maruti Make Lucas , Alternator Starter Quil 407 Make Autolek , Alternator Starter Quil 407 Make Lucas , Alternator Stator Coil Leyland Make Lucas , Alternator Stator Coil Maruti Lucas , Bearing 6303-Zz Make Ngk , Bearing 6303-Zz Make Skf , Breake Light Switch Make Jcb , Brush Holder Complete Make Autolek , Brush Holder Complete Make Lucas , Bulb 1141 Make Power , Cab Harness Make Jcb , Cabin Light Make Lumax , Combination Switch 12 V Jeep Mahindra , Combination Switch 12 V.Make Lumax , Combination Switch 12 V.Make Minda , Combination Switch 24 V. Make Minda , Combination Switch 24 V.Make Lumax , Combination Switch Double Rod 709 / 407 Lumax , Combination Switch Double Rod 709 / 407 Make Minda , Coper Wire 10Mm Make Finolex , Coper Wire 10Mm Make Shanco , Coper Wire 4 Mm Make Finolex , Coper Wire 4 Mm Make Shanco , Coper Wire 5Mmfinolex , Coper Wire 5Mm Make Shanco , Coper Wire 6Mm Make Finolex , Coper Wire 6Mm Make Shanco , Coper Wire 7Mm Make Finolex , Coper Wire 7Mm Make Shanco , Coper Wire 8Mm Make Finolex , Coper Wire 8Mm Make Shanco , Flasher Unit 12 V Make Hella , Flasher Unit 12 V Make Pmp , Flasher Unit 24Vhella , Flasher Unit 24V Make Pmp , Focus Light Switch Make Jcb , Forward / Reverse Dump Relay Harness Make Jcb , Front Indicator & Head Lamp Mtg. Left Hand Side Make Jcb , Front Indicator & Head Lamp Mtg. Right H. S.Make Jcb , Fuse Box Make Hella , Fuse Box Make Shanco , Fuse Gole Wale Make Aspa , Fuse Gole Wale Make Shanco , Halozen Bulb 12 V. Tata Make Philips , Halozen Bulb 12 V.Tata Make Halonix , Halozen Bulb 24 V. Make Halonix , Halozen Bulb 24 V. Make Philips , Head Lamp Make Jcb , Head Light Bulb 12 V. Make Halonix , Head Light Bulb 12 V. Make Philips , Head Light Bulb 24 V. Make Philips , Head Light Bulb 24 V.Mkae Halonix , Head Light Cargo 909 L / L. Make Lumax , Head Light Cargo 909 L / L.Make Aitopal , Head Light Clip Make Shanco , Head Light Cutout Make Hella , Head Light Cutout Make Minda , Head Light Eicher Make Autopal , Head Light Eicher Make Lumax , Head Light Holder Make Minda , Head Light Holder Make Shanco , Head Light Ley. Comet Biasan & Jeeplumax , Head Light Leyland Comet Biasan & Jeep Make Minda , Head Light Reley Makehella , Head Light Reley Make Shanco , Head Light Switch L Type Make Minda , Head Light Switch L Type Make Nulite , Head Light Tata 1210 Make Autopal , Head Light Tata 1210 Make Lumax , Head Light Tata 709 Make Autopal , Head Light Tata 709 Make Lumax , Horn 12 V. Make Autolek , Horn 12 V. Make Minda , Horn 24 V. Make Autolek , Horn 24 V. Make Minda , Horn Button Of Steel Make Minda , Horn Rile 12 V Make Hella , Horn Rile 12 V Make Minda , Horn Switch Make Kkk , Horn Switch Make Minda , Hour Meter Make Jcb , Indicator Front 709, 1210, Cargo, Liteman , Indicator Front 709, 1210, Cargo, Minda , Indicator Front 709, 1210, Cargo, Leyland Make Hella , Ingnition Switch Make Jcb , Instrument Cluster Make Jcb , Instrument Panel Make Jcb , Insulation Tape Make Shanco , Insulation Tape Make Stilgrip , Main Line Switch Jeep Make Minda , Main Line Switch Tata Make Minda , Meter Bulb 12 V Make Minda , Meter Bulb 12 V Make Shanco , Panel Harness Make Jcb , Panel Light Switch Make Jcb , Pinion Bush 12 V Make Banara , Pinion Bush 12 V Make Gmk , Piyano Switch Make Minda , Piyano Switch Make Shanco , Pressure Transducer Make Jcb , Push Pull Switch Make Minda , Relay Dump Make Jcb , Relay Forward / Reverse Make Jcb , Relay, Start Make Jcb , Saloind Switch Cargo 909 L / L.Mico , Saloind Switch Eicher N / M Make Mico , Saloind Switch Eicher O / M Make Mitsubishi , Saloind Switch L / L Comet & Biasanlucas , Saloind Switch Leyland Comet & Biasan Make Autolek , Saloind Switch Tata 1210 Make Autolek , Saloind Switch Tata 1210 Make Lucas , Saloind Switch Tata 709 & 608 Make Autolek , Saloind Switch Tata 709 & 608 Make Lucas , Salonoid Switch Jeep Make Autolek , Salonoid Switch Jeep Make Lucas , Salonoid Switch Mahindra Maximo Bosch , Salonoid Switch Maximo Make Lucas , Search Light ( Round ) Make Lumax , Self 1210 Make Autolek , Self 1210 Make Lucas , Self 407 N / M Makeautolek , Self 407 N / M Make Lucas , Self 709, 608 Make Autolek , Self 709, 608 Make Lucas , Self Armature Mahindra Maximo Bosch , Self Armature Maximo Make Lucas , Self Armeture Ambasder Make Autolek , Self Armeture Ambasder Make Lucas , Self Armeture Cargo 909 L / L. Mico , Self Armeture Eichern / M Make Mico , Self Armeture Eicher O / Mmake Mitsubishi , Self Armeture Jeep Di Make Autolek , Self Armeture Jeep Di Make Lucas , Self Armeture Leyland Comet Lucas , Self Armeture Leyland Comet Make Autolek , Self Armeture Tata 1210 Make Autolek , Self Armeture Tata 1210 Make Lucas , Self Armeture Tata 709 & 608 Lucas , Self Armeture Tata 709 & 608 Make Autolek , Self Aux Coil 12 V.Make Autolek , Self Aux Coil 12 V.Make Lucas , Self Bendex Ambasder Make Autolek , Self Bendex Ambasder Make Lucas , Self Bendex Cargo 909 L / L. Make Autolek , Self Bendex Cargo 909 L / L. Make Lucas , Self Bendex Eichern / M Make Mico , Self Bendex Eicher O / M Make Mitsubishi , Self Bendex Jeep Di Make Autolek , Self Bendex Jeep Di Make Lucas , Self Bendex Leyland Comet Make Autolek , Self Bendex Leyland Comet Make Lucas , Self Bendex Maximo Make Lucas , Self Bendex Maxximo Make Bosch , Self Bendex Tata 1210 Make Autolek , Self Bendex Tata 1210 Make Lucas , Self Bendex Tata 709 & 608 Make Autolek , Self Bendex Tata 709 & 608 Make Lucas , Self Brush Ambasder Make Autolek , Self Brush Ambasder Make Lucas , Self Brush Cargo 909 L / L. Make Lucas , Self Brush Eichern / M Make Mico , Self Brush Eicher O / Mmake Mitsubishi , Self Brush Jeep Di Make Autolek , Self Brush Jeep Di Make Lucas , Self Brush Ley. Comet & Biasan Lucas , Self Brush Leyland Comet & Biasanautolek , Self Brush Tata 1210 Make Autolek , Self Brush Tata 1210 Make Lucas , Self Brush Tata 709 & 608 Make Autolek , Self Brush Tata 709 & 608 Make Lucas , Self Bush 031, 237, 649, 888, 1089, 1090, 1110, 471, 430 Make Msp / Star , Self Clutch Assembly All Models Lucas , Self Clutch Assembly All Models Make Autolek , Self Connect Point Comet Make Autolek , Self Connect Point Comet Make Lucas , Self Connect Point Jcb Make Autolek , Self Connect Point Jcb Make Lucas , Self Connect Point Tata Make Autolek , Self Connect Point Tata Make Lucas , Self E.G.T. Complete Leyland Autolek , Self E.G.T. Complete Mahindra Maximo Lucas , Self E.G.T. Complete Mahindra Maximo Make Bosch , Self Eicher O / M Make Mitsubishi , Self Field Body Complete Mahindra Maximo Make Bosch , Self Field Body Complete Maximo Make Lucas , Self Field Bolt 608 Make Autolek , Self Field Bolt 608 Make Lucas , Self Field Bolt Kit Make Autolek , Self Field Bolt Kit Make Lucas , Self Field Coil 1210.709.407 Lucas , Self Field Coil 1210.709.407 Make Autolek , Self Field Wire Cargo Make Lucas , Self Fild Body Cargo 909 L / L. Make Mico , Self Fild Body Eicher O / M Make Mitsubishi , Self Fild Body L / L Comet & Biasan Autolek , Self Fild Body Leyland Comet & Biasan Make Lucas , Self Fild Body Tata 1210 Make Autolek , Self Fild Body Tata 1210 Make Lucas , Self Fild Body Tata 709 & 608 Make Autolek , Self Fild Body Tata 709 & 608 Make Lucas , Self Hosing Ambasder Make Autolek , Self Hosing Ambasder Make Lucas , Self Hosing Cargo 909 L / L. Make Lucas , Self Hosing Eicher O / M Make Mitsubishi , Self Hosing Jeep Di Make Autolek , Self Hosing Jeep Di Make Lucas , Self Hosing Leyland Comet & Biasan Autolek , Self Hosing Leyland Comet & Biasan Lucas , Self Hosing Maximo Make Bosch , Self Hosing Maximo Make Lucas , Self Hosing Tata 1210 Make Autolek , Self Hosing Tata 1210 Make Lucas , Self Hosing Tata 709 & 608 Make Autolek , Self Hosing Tata 709 & 608 Make Lucas , Self Jcb Make Autolek , Self Jcb Make Lucas , Self Jeep Make Lucas , Self Jeep Make Mico , Self Katora Maximo Make Bosch , Self Katora Maximo Make Lucas , Self Leyland Cargo Make Mico , Self Leyland Comet Biason 24 V.Mico , Self Leyland Comet Biason 24 V. Make Lucas , Self Mahindra Maximo Make Bosch , Self Maxximo Make Lucas , Self Pinion Bush Cargo 909 L / L.Banara , Self Pinion Bush Cargo 909 L / L.Gmk , Self Pinion Bush Eicher O / Mbanara , Self Pinion Bush Eicher O / Mgmk , Self Pinion Bush Leyland Cometgmk , Self Pinion Bush Leyland Comet Banara , Self Pinion Bush Tata 1210Banara , Self Pinion Bush Tata 1210Gmk , Self Pinion Ley.Comet & Biasan Lucas , Self Pinion Leyland Comet & Biasanautolek , Self Pinion Tata 1210 Make Autolek , Self Pinion Tata 1210 Make Lucas , Self Plenger Comet Make Autolek , Self Plenger Comet Make Lucas , Self Rocker Plate Ambasder Make Autolek , Self Rocker Plate Ambasder Make Lucas , Self Rocker Plate Cargo 909 L / L.Mico , Self Rocker Plate Complete Maximo Bosch , Self Rocker Plate Complete Maximo Make Lucas , Self Rocker Plate Eicher O / Mmake Mitsubishi , Self Rocker Plate Jeep Di Make Autolek , Self Rocker Plate Jeep Di Make Lucas , Self Rocker Plate Leyland Comet Lucas , Self Rocker Plate Leyland Cometautolek , Self Rocker Plate Tata 1210Autolek , Self Rocker Plate Tata 1210Lucas , Self Rocker Plate Tata 709 & 609Autolek , Self Rocker Plate Tata 709 & 609 Make Lucas , Side Glass Pvc ( All Vehicles ) Marshal , Side Glass Steel ( All Vehicles ) Somex , Siren Amplifier 12V Make Ahuja , Siren Amplifier Mic 12V Make Ahuja , Siren Bhonga 12 V Make Ahuja , Start Relay Make Jcb , Starter Push Button 24 V Make Camel , Starter Push Button 24 V Make Minda , Starter Push Button Make Camel , Starter Push Button Make Minda , Steering Ignition Switch 709 Make Minda , Switch Column Make Jcb , Switch Reverse Horn Make Jcb , Tale Lamp Assy. 4 Chamber Make Hifi , Tale Lamp Assy. 4 Chamber Make Liteman , Tape Roll Non-Sticky Make Shanco , Tape Roll Non-Sticky Make Solar , Toggle Switch Make Camel , Toggle Switch Make Minda , Tub Light Make Jcb , Water Temp Sensor Make Jcb , Wiperarm Tata 407 Make Syndicate , Wiper Arm Cargomake Syndicate , Wiper Arm Eichermake Syndicate , Wiper Arm Jeep Make Syndicate , Wiper Arm Leyland Make Syndicate , Wiper Arm Tata 1210 Make Syndicate , Wiper Arm Tata 709 Make Syndicate , Wiper Bladejeepmake Syndicate , Wiper Bladetata 407 Make Syndicate , Wiper Blade Cargomake Syndicate , Wiper Blade Eicher Make Syndicate , Wiper Blade Leyland Make Syndicate , Wiper Blade Tata 1210 Make Syndicate , Wiper Blade Tata 709 Make Syndicate , Wiper Machineeicher Make Lucas , Wiper Machine Armature Cargolucas , Wiper Machine Armature Eicherlucas , Wiper Machine Armature Jeeplucas , Wiper Machine Armature Leyandlucas , Wiper Machine Armature Tata 1210Lucas , Wiper Machine Armature Tata 407Lucas , Wiper Machine Armature Tata 709Lucas , Wiper Machine Cargo Make Lucas , Wiper Machine Jeepmake Lucas , Wiper Machine Lelyandmake Lucas , Wiper Machine Tata 1210 Make Lucas , Wiper Machine Tata 407 Make Lucas , Wiper Machine Tata 709 Make Lucas , Wiper Motor Make Lucas , Wiring Clip 18 No. Make Shanco , Wiring Clip 2A No. Make Shanco , Wiring Clip 4 No. Make Shanco , Wiring Clip 5 No. Make Shanco , Wiring Loom Cop. Ambasder Nova Dlxshanco , Wiring Loom Cop. Ambasder Nova Dlx Finolex , Wiring Loom Cop. Cargo 909 L / L. Finolex , Wiring Loom Cop. Cargo 909 L / L. Shanco , Wiring Loom Cop. Dcm Make Shanco , Wiring Loom Cop. Dcm Makefinolex , Wiring Loom Cop. Eicher O / Mfinolex , Wiring Loom Cop. Eicher O / M Shanco , Wiring Loom Cop. Jeep Difinolex , Wiring Loom Cop. Jeep Dishanco , Wiring Loom Cop. Ley Comet & Biasanshanco , Wiring Loom Cop. Leyland Comet & Biasanfinolex , Wiring Loom Cop. Tata 1210 Make Finolex , Wiring Loom Cop. Tata 1210 Make Shanco , Wiring Loom Cop. Tata 709 Make Finolex , Wiring Loom Cop. Tata 709 Make Shanco , Working Light ( Search Light ) Jcb , Working Light Switch Make Jcb , 12. Oil Paint 10 Mm / 3 Soot 2 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 3 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 4 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 5 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 6 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 7 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 8 Bolt With Nut Make Tvs , 10 Mm / 3Soot 1Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 1 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 2 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 3 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 4 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 5 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 6 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 7 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 8 Bolt With Nut Make Tvs , 14 Mm / 0.5 1 Bolt With Nut Make Tvs , 14 Mm / 0.5 2 Bolt With Nut Make Tvs , 14 Mm / 0.5 3 Bolt With Nut Make Tvs , 14 Mm / 0.5 4 Bolt With Nut Make Tvs , 14 Mm / 0.5 6 Bolt With Nut Make Tvs , 14 Mm / 0.5 7 Bolt With Nut Make Tvs , 14 Mm / 0.5 8 Bolt With Nut Make Tvs , 14 Mm / 0.5 Inch5 Bolt With Nut Make Tvs , 2.1 / 2 Soot 2 Bolt With Nut Make Tvs , 3 Soot 2.1 / 2Bolt With Nut Make Tvs , 3 / 41 Bolt With Nut Make Tvs , 3 / 42 Bolt With Nut Make Tvs , 3 / 43 Bolt With Nut Make Tvs , 3 / 44 Bolt With Nut Make Tvs , 3 / 45 Bolt With Nut Make Tvs , 3 / 46 Bolt With Nut Make Tvs , 3 / 47 Bolt With Nut Make Tvs , 3 / 48 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 4 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 5 Bolt With Nut Maketvs , 6 Mm / 2 Soot 6 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 7 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 8 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 1 Bolt With Nut Tvs , 6 Mm / 2 Soot 2 Bolt With Nut Tvs , 6 Mm / 2 Soot 3 Bolt With Nut Tvs , 6 X 25 Mm / 1 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 1 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 2 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 2 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 3 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 3 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 4 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 4 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 5 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 5 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 6 Bolt With Nuttvs , 8 Mm / 2.5 Soot 6 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 7 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 7 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 8 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 8 Bolt With Nut Make Tvs , Aari Patte Make Taparia , Band 1 Make B Class , Band 1.5 Make B Class , Band 1 / 2 Make B Class , Band 2 Make B Class , Band 2.5 Make B Class , Band 3 Make B Class , Band 3 / 4 Make B Class , Band 4 Make B Class , Battery Khunti Making , Bonet 1210 Make Gmi , Bonet 709 Make Gmi , Bonet Cargo Make Gmi , Bonet Leyland Make Gmi , Brass Welding Rods , Brush Taar Ka , Bumfer Cargo Make Gmi , Bumfer Dcm Make Gmi , Bumfer Eicher Make Gmi , Bumfer Leyland Make Gmi , Bumfer Tata 1210 Make Gmi , Bumfer Tata 1210 Se Make Gmi , Bumfer Tata 709 Make Gmi , Cabin L.P. Shoe Ke Left Right Pankhe , Cabin L.P. Shoe Radiator Frot With Kabje Jaali , Charging Clip , Chasis Welding Rod Ss 10 No. Make Advani , Chasis Welding Rod Ss 8 No. Make Advani , Clear Varnish Make Asian , Color Chhan Ne Ka Kapda , Cotton Waste , Cotton Waste , Diaphragm , Dico Putty , Door Heavy Parliament Kabje , Elbow 1 Make B Class , Elbow 1.5 Make B Class , Elbow 1 / 2 Make B Class , Elbow 2 Make B Class , Elbow 2.5 Make B Class , Elbow 3 Make B Class , Elbow 3 / 4 Make B Class , Elbow 4 Make B Class , G.I. Pipe 1 25 Mm Make B Class , G.I. Pipe 1.5 40 Mm Make B Class , G.I. Pipe 1 / 2 15 Mm Make B Class , G.I. Pipe 2.5 65 Mm Make B Class , G.I. Pipe 3 80 Mm Make B Class , G.I. Pipe 4 100 Mm Make B Class , G.I.Pipe 2 50 Mm Make B Class , Gas Welding Holder Make Genuine , Gas Welding Nozzle Make Genuine , Gas Welding Regulator Brass Make Genuine , Gear Oil 90 No. , H.R. Sheet All Size Make Tata , Hinch Mahindra Jeep , Hose Joint 2 , Hose Joint 3 , Hose Nipple 3 Make Arti , Hp Colour Toner 130A , Jeepfront Glass Fram Make Mahindra , Jeepmudgaurd Make Mahindra , Kabje 3 , Kabje Nut Bolt , Kunde Nakhuche , Lohe Ki Welding Rods , M.S. Agles All Size Make Tata , M.S. Beam All Size Make Tata , M.S. Channle All Sizemake Tata , M.S. Round Bar All Size Make Tata , M.S. Sheet All Sizemake National , M.S. Sqre Bar All Size Make Tata , M.S. Squre Pipe All Size Make Tata , Meta Fil Putty Make Pan , Mudguardside Tata 709 Make Gmi , Mudguard Left / Right 1210 S Model Make Gmi , Nipple 3 80 Mm12 Make B Class , Nipple 3 80 Mm18 Make B Class , Nipple 3 80 Mm4 Make B Class , Nipple 3 80 Mm6 Make B Class , Nipple 3 80 Mm7 Make B Class , Nipple 3 80 Mm8 Make B Class , Nipple 3 80 Mm9 Make B Class , Nipple 3 80 Mm 24 Make B Class , Nipple 3 80 Mm 3 Make B Class , Nipple 3 80 Mm 5 Make B Class , Nut Bolt 10 No. 1.5 Long , Nut Bolt With Woisher ( 10 No. ) , Oil Paint Aspa Black Color , Oil Paint Aspa Blue , Oil Paint Aspa Blue Color , Oil Paint Aspa Golden Yellow Color , Oil Paint Aspa Green , Oil Paint Aspa Grey Color , Oil Paint Aspa Passion Yellow Color , Oil Paint Aspa Post Office Red Color , Oil Paint Aspa Signal Red Color , Oil Paint Aspa Taxi Yellow , Oil Paint Aspa White Color , Oil Paint Black Make Asian Apcolite , Oil Paint Deep Orange Make Asian Apcolite , Oil Paint Ferozi Makeasian Apcolite , Oil Paint Golden Yellowmake Asian Apcolite , Oil Paint Oxford Blue Makeasian Apcolite , Oil Paint Post Office Red Make Asian Apcolite , Oil Paint Signal Redmakeasian Apcolite , Oil Paint Sky Blue Make Asian Apcolite , Oil Paint Smoke Grey Make Asian Apcolite , Oil Paint White Colour Make Asian Apcolite , Op 01 Ltr Naap , Op 02 Ltr Naap , Op 1.5 Soot Nut Bolt 2 , Op 1.5 Soot Woisher , Op 1 / 2 Ltr Naap , Op 10 No. Jointer , Op 10 No. Woisher , Op 14 Cutter Plate , Op 2 Soot Drill Barma , Op 2 Soot Nut Bolt 2 , Op 2 Soot Woisher , Op 2 Nut Bolt Woisher , Op 3 Soot Nut Bolt 1.5 , Op 3 Soot Nut Bolt 2 , Op 3 Soot Nut Bolt 3 , Op 3 Soot Woisher , Op 320 No. Patte , Op 4 Soot Nut Bolt 3 , Op 4 Soot Woisher , Op 4 Cutter Plate , Op 5 Cutter Plate , Op 6 Chaini , Op 6 Round Sandasi 2.5 Ft Long , Op 750 Tube Nali , Op 8 No. Nut Bolt Robot , Op 8Mm Plate Molding L / L , Op Axle 3 Ft Long , Op Banner Set Brush , Op Block Kaan Welding , Op Block Welding Tata Mint , Op Both Seat Cover Fitting , Op Brass Gas Welding Flex 100 Gm , Op Carbide , Op Carbide Tank Lid Rubber Channel , Op Catcher Patti , Op Chain 14 Guage 3 Ft , Op Chain 4Mm , Op Chitakni 4 , Op Compressure Pipe , Op Cut Job In Hub Bearing Seat , Op Cutter Machine Repairing , Op Door Kabje Eicher 1095 , Op Door Kabje Maxximo , Op Door Kabje Mega Xl , Op Door Kabje Mjeep Di , Op Door Lock L & T Case , Op Door Lock Screw 0.5 , Op Door Lock Screw 0.75 , Op Door Lock Thessi Screw With Nut , Op Door Stopper Belt Mjeep Di , Op Door Trim Mjeep Di , Op Fiber Gate Sheet 72X28 , Op Filter Paane Paate Wale , Op Flat Small Ball Ke Brush , Op Foot Board Mahindra Jeep Di , Op Front Both Seat Making Eicher 1075 , Op G.I. Nipple 2 ( Long 6 ) , Op Galvanized Cotted Chaddar 19 Guage 4Ft , Op Garden Jaali 1X1 ( Gale Wali ) , Op Gas Light Stone , Op Gas Regulator Repairing , Op Gas Welding Pipe , Op Gate Hole Drop , Op Gear Lever Welding , Op Grese , Op Grinder Patte 4 , Op Haath Thela Axle 3 Ft , Op Haath Thela Wheel , Op Haath Thela Wheel Bearing , Op Hand Gloves , Op Hole Drop Heavy ( Steel ) , Op Hydraulic Kenchi Jack Repairing , Op Joint Nipple , Op Kabje 4 , Op Kabje 5 , Op Kenchi Brass Mouth 16 , Op Kenchi Peetal Ke Mouth Wali 12 , Op Left Side Door Shockup Robot , Op Lpg Gas Tanki Filling , Op Manifold Welding , Op Marker Pen , Op Mask , Op Masking Tap , Op Ms Sheet Moulding , Op New Gas Cutter , Op Nipple , Op Nipple 2.5 , Op Nipple 32 , Op Nipple 4 , Op Nipple Opening Fitting , Op Nut Bolt 13 No. Mjeep Di , Op Nut Bolt 14 No. Mjeep Di , Op Oil Bottle , Op Oil Jhabbi Big , Op Oil Jhabbi Small , Op Outer Handle Robot , Op Paddle With Fitting , Op Paint Removal , Op Pilament Kabje , Op Plate Cutting Welding & Hole Work , Op Puncher Ke Pench 3 No , Op Raddi Paper , Op Reducer 2X3 , Op Rejimal Patti Cloth , Op Robot Bonet Lock , Op Roof Cushing Eicher 1095 , Op Round Sable Brush 12 No , Op Sandasi 8 , Op Simple Ply 9Mm 4X8 Ft , Op Spray Color Gun ( Pilot ) , Op Stool Box ( Taxi Yellow ) , Op Tailgatekabje Mjeep Di , Op Tower Patti , Op Tube Valve , Op Vaasu Lock , Op Valve Die Big , Op Valve Pvc 4 , Op Water Proof Checker Ply 16 Mm 4X8 Ft , Op Water Proof Ply 18 Mm 4X8 Ft , Op Wheel Nut Bolt , Op Wheel Woisher , Op Woisher 19 No. Js200 , Op Woisher 4 Soot , Op Woisher Spring 13 No Bolt Mjeep Di , Op Woisher Spring 14 No Bolt Mjeep Di , Oxygen Cylinder Feeling , Paint Brush 2 , Paint Brush 3 , Paint Brush 4 , Paint Brush 5 , Pipejointer 10Mm , Pipejointer 12Mm , Polyester Putty , Radiator Assy.Model Cargo 909 , Radiator Assy.Model Dcm , Radiator Assy.Model Eicher , Radiator Assy.Model Jcb , Radiator Assy.Model Jeep , Radiator Assy.Model Jumbo 1612 , Radiator Assy.Model Leyland , Radiator Assy.Model Tata 1210 , Radiator Assy.Model Tata 407 , Radiator Assy.Model Tata 709 , Radiator Assy.Model Tractor , Radiator Bottomex With Labourdcm , Radiator Bottomex With Laboureicher , Radiator Bottomex With Labourjumbo 1612 , Radiator Bottomex With Labourtata 407 , Radiator Bottomex With Labourtractor , Radiator Bottomex With Labour L Jeep , Radiator Bottomex With Labour Tata 1210 , Radiator Bottomexchange With Labour Model Cargo 909 , Radiator Bottomexwith Labour L Tata 709 , Radiator Bottom With Labourleyland , Radiator Bottom With Labour L Jcb , Radiator Brackatex With Labourjcb , Radiator Brackatex With Labourjeep , Radiator Brackatex With Labourjumbo 1612 , Radiator Brackatex With Labourtata 1210 , Radiator Brackatex With Labour Cargo 909 , Radiator Brackatex With Labour Mo Leyland , Radiator Brackatex With Labour Model Dcm , Radiator Brackatex With Labour Tata 407 , Radiator Brackatex With Labour Tractor , Radiator Brackatwith Labour Model Eicher , Radiator Brackat With Labour Tata 709 , Radiator Framewith Labourjcb , Radiator Framewith Labourjeep , Radiator Framewith Labourjumbo 1612 , Radiator Framewith Labourleyland , Radiator Framewith Labourtata 407 , Radiator Framewith Labour Model Cargo 909 , Radiator Frame Ex With Labourdcm , Radiator Frame Ex With Labourtata 709 , Radiator Frame Ex With Labourtata1210 , Radiator Frame Exwith Labourtractor , Radiator Frame With Laboureicher , Radiator Jali Ex With Labourcargo 909 , Radiator Jali Ex With Laboureicher , Radiator Jali Ex With Labourjcb , Radiator Jali Ex With Labourjeep , Radiator Jali Ex With Labourleyland , Radiator Jali Ex With Labourtata 1210 , Radiator Jali Ex With Labourtata 407 , Radiator Jali Ex With Labourtractor , Radiator Jali Ex With Labour Dcm , Radiator Jali Exc With Labourtata 709 , Radiator Jali With Labourjumbo 1612 , Radiator Neck Ex With Labourdcm , Radiator Neck Ex With Laboureicher , Radiator Neck Ex With Labourjcb , Radiator Neck Ex With Labourjeep , Radiator Neck Ex With Labourjumbo 1612 , Radiator Neck Ex With Labourleyland , Radiator Neck Ex With Labourtata 407 , Radiator Neck Ex With Labourtata1210 , Radiator Neck Ex With Labourtractor , Radiator Neck Ex With Labour Tata 709 , Radiator Neck With Labour Cargo 909 , Radiator Service , Washing Lab Tata 1210 , Radiator Service , Washing Lab Tata 407 , Radiator Service , Washing Labourdcm , Radiator Service , Washing Laboureicher , Radiator Service , Washing Labourjcb , Radiator Service , Washing Labourjeep , Radiator Service , Washing Labourleyland , Radiator Service , Washing Labour 1612 , Radiator Service , Washing Labour Model Cargo 909 , Radiator Service , Washing Tata 709 , Radiator Service , Washing Tractor , Radiator Top Exchange With Jumbo 1612 , Radiator Top Exchange With Lab Tata 709 , Radiator Top Exchange With Labour Dcm , Radiator Top Exchange With Labour Eicher , Radiator Top Exchange With Labour Jcb , Radiator Top Exchange With Labour Leyland , Radiator Top Exchange With Labour Model Cargo 909 , Radiator Top Exchange With Labour Model Jeep , Radiator Top Exchange With Labour Tata 1210 , Radiator Top Exchange With Labour Tata 407 , Radiator Top Exchange With Labour Tractor , Red Oxide / Metal Primer Make Asian , Rejmal Paper ( All Size ) , Rejmal Paper ( All Size ) Feet , Shoe Jaali Lattu , Socket 1 Make B Class , Socket 1.5 Make B Class , Socket 1 / 2 Make B Class , Socket 2 Make B Class , Socket 2.5 Make B Class , Socket 3 Make B Class , Socket 3 / 4 Make B Class , Socket 4 Make B Class , Socket Nipple 3 Make Arti , Tai Lever , Tank Mastik Paints / Rubber Paints Make Shalimar , Tarpinmake Genuine , Tata 1210 Moulded Foot Rest Make Gmi , Tata 1210 Mudgaurd Half Round Rip Make Gmi , Tata 709Mudgard ( Pakkhe ) Make Gmi , Tee 1 Make B Class , Tee 1.5 Make B Class , Tee 1 / 2 Make B Class , Tee 2 Make B Class , Tee 2.5 Make B Class , Tee 3 Make B Class , Tee 3 / 4 Make B Class , Tee 4 Make B Class , Tee Tomy 7, 8, 10 , Thinner Make Genuine , Totiya1 Make Brass , Totiya1 Make G.I , Totiya1 Make Steel , Totiya1 / 2 Make Brass , Totiya1 / 2 Make G.I , Totiya1 / 2 Make Steel , Totiya3 / 4 Make Brass , Totiya3 / 4 Make G.I , Totiya3 / 4 Make Steel , Union 1 Make B Class , Union 1.5 Make B Class , Union 1 / 2 Make B Class , Union 2 Make B Class , Union 2.5 Make B Class , Union 3 Make B Class , Union 3 / 4 Make B Class , Union 4 Make B Class , Welding Cable , Welding Glass Black , Welding Glass White , Welding Goggles , Welding Rod 3.15 Mm Make Advani , Welding Rod 3.15 Mm Make Manglam , Welding Rod 4 Mm Make Advani , Welding Rod 4 Mm Make Manglam , Welding Rod Brass Make Ngenuine , Wooden Patiye 1 Make Genuine , Wooden Patiye 2 Make Genine , Wooden Patiye 3 Make Genuine , Wooden Patiye 4 Make Genuine , Wooden Patiye 5 Make Genuine , Wooden Patiye 6 Make Genuine
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
32.
Housing Urban and Rular Development #8979082 Technical Bid
Tender For Electrical Work - &P 2 Fire Fighting Work Fire Pumps And Accessories: Supplying, Installation, Testingand Commissioningof Electric Driven Main Fire Pump Suitablefor Automatic Operationandconsistingoffollowing, Completeinall Respects, As Required :A ) Horizontal Type, Multistage, Centrifugal, Split Casing Pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft, Mechanical Seal Conforming To Is 1520.B ) Suitable Hp Squirrel Cage Induction Motor, Tefc, Synchronousspeed1500rpm, Suitableforoperation On415volts, 3Phase50hz, Acsupplywithip55 Protectionforenclosure, Horizontalfootmountedtype With Class-F Insulation, Conforming To Is-325.C ) Suitable Hp Squirrel Cage Induction Motor, Tefc, Synchronousspeed1500rpm, Suitableforoperation On415volts, 3Phase50hz, Acsupplywithip55 Protectionforenclosure, Horizontalfootmountedtype With Class-F Insulation, Conforming To Is-325.D ) M.S. Fabricated Common Base Plate, Coupling, Coupling Guard, Foundation Bolts Etc. As Required. E ) Suitablecementconcretefoundationdulyplastered With Anti Vibration Pads. F ) 2850 Lpm At 70 M Headnote: * The Head Of The Pump Is Selected In A Manner Soastogivea Minimum 3.5Kgf / Cm 2 Pressureat The Highest / Farthest Point. 3 Supplying, Installation, Testingandcommissioningof Diesel Engine Driven Main Fire Pump Suitable For Automatic Operation And Consisting Of Following, Complete In All Respects, As Required : ( Diesel Driven Pump ) A ) Horizontal Type, Multistage, Centrifugal Pump Of Cast Of Iron Body And Bronze Impeller With Stainless Steel Shaft, Mechanical Seal Conforming To Is 1520.B ) Suitablehp, 1500Rpmwatercooledwithradiator, Diesel Engine Conforming To Relevant Is Standard Completewithautostartingmechanism, 12 / 24Volts Electricstartingequipment, Dieseltank, Exhaustpipe Extended Upto 10 M Outside Pump House Duly Insulated With 50 Mm Thick Glass Wool With 1.0 Mm Thick Aluminium Sheet Cladding, Residential Silencer, Instruments And Protection As Per Standard Specification, Stop Solenoid For Auto Stop In The Event Of Fault With Audio Indications, Painted With Post Office Red Colour Etc. As Required. C ) M.S Fabricated, Common Base Plate, Coupling, Coupling Guard, Foundation Bolts Etc. As Required. D ) Suitablecementconcretefoundationdulyplastered And With Anti Vibration Pads.2850 Lpm At 70 M Headnote: * The Head Of The Pump Is Selected In A Manner Soastogivea Minimum 3.5Kgf / Cm 2 Pressureat The Highest / Farthest Point. 4 Supplying, Installation, Testingandcommissioningof Electricdrivenpressurisationpumpsuitablefor Automaticoperationandconsistingoffollowing, Complete In All Respects, As Required : ( Jockey Pump ) A ) .Horizontaltype, Multistage, Centrifugalpumpofcast Iron Body And Bronze Impeller With Stainless Steel Shaft, Mechanical Seal Conforming To Is : 1520. B ) .Suitablehpsquirellcageinductionmotortefctype Suitableforoperationon415volts, 3Phase50hz Ac Supply With Ip 55 Class Of Protection For Enclosure, Horizontalfootmountedtypewithclass-FInsulation, Conforming To Is : 325. C ) .M.S.Fabricated Common Base Plate, Coupling, Coupling Guard, Foundation Bolts Etc. As Required.D ) .Suitablecementconcretefoundationdulyplastered And With Anti Vibration Pads.180 Lpm At 70 M Head 5 Control Panels: Fabrication, Supply, Insallation Testing & Commissioning Of Electrical Control Panel Of Cubical Construction, Floor Mounted Type, Fabricated Out Of 2Mm Thick Crca Sheet, Compartmentalisedwithhingedlockabledoors, Dustandverminproof, Powdercoatedofapproved Shade After 7 Tank Treatment Process, Cable Alley, Inter-Connection With Suitable Sizecopperconductor Cable / Solidcopper Strip, Havingswitchgears And Accessories, Mountings And Internal Wiring, Earth Terminals, Numbering Etc. Complete In All Respect, Suitableformainfirepump, Pressurisationpump& Dieselpumpsetcompleteaspercpwdspecification Withfollowingincomingandoutgoings, Suitablefor Operationon415v, 3Phase, 50Hzacsupplywith Enclosure Protection Class Ip 42 As Required :Incomings:A ) 630A, 50Ka4 Pole Mccb, Ics=100% Icu Rating Digital Voltmeter 0-500V With Selector Switch Ammeter ( 0-630 A ) With Selector Swtich & Cts Etc.B ) Ledtyperybphaseindicatinglamps, On, Off, Trip Indicating Lampsset Of Copperbus Bar 800Ampsoutgoings: Main Fire Pump :200Amp, 50Katpnmccb, Ics=100%Icu, Withfully Automatic Star / Delta Starter Suitable For 75 Hp Pump With Overloadprotection, Currentsensingtypesinglephase Preventorcompletewithallacceessoriesandinternal Wiringrequiredforautomaticoperation, Selectorswitch For Local / Remote, Auto / Manual / Off Operation. - 2 Setsjockey Pump:100 Amp, 50Ka Tpn Mccb, Ics=100% Icu, With Suitable Hp Fully Automatic Star / Delta Starter With Overload Protection, Currentsensingtypesinglephasepreventor Complete With All Acceessories And Internal Wiring Requiredforautomaticoperation, Selector Switchfor Local / Remote, Auto / Manual / Off Operation. - 2 Setsdiesel Engine Controla ) Control For Diesel Engine Comprising - Automatic / Manualselctorswitch&3Attemptsstarting Device, Timersandrelaysasrequired, Pushbuttons, Start / Stop In Manual Modeb ) Indicatinglampforhigh / Lowlub.Oilpressure, High Water Temp And Engine On Indicationc ) Batterychargersuitbalefor12v / 24Vdcwithboost And Trickle Selector Switch, 0-30 V Dc Volt Meter, And 020 A Dc Ammeter All Standard Relays And Accessories For Automatic Operation Of Diesel Engine.System Controller: Designing, Supply, Installation, Testingand Commissioning Of System Controller To Control Operation Of Main Electric Fire Pump, Diesel Pump, Pressurization Pump, Terrace Pump In Sequence As Per Specification Consisting Of Relays, Timers. Sensors, Annunciation Windowforfaultindication, Complete As Per Specification 6 Providinglaying, Testing&CommissioningofCClass Heavydutymspipeconformingtois1239 / 3589I / C Fittingslikeelbows, Tees, Flanges, Tapers, Nutsbolts, Gasketsetc.Ingroundincludingwelding, Excavation& Providingcementconcreteblocksassupports, Anticorrosivetreatmentwithcoaltar / Asphalttapeasper Is10221, Refillingthetrenchetc.Offollowingsizes Complete As Required. 200 Mm. Dia ( Wall Thickness = 6.3 Mm ) 7 150 Mm. Dia 8 Providing, Laying, Testing&Commissioningof CClass Heavydutymspipeconformingtois3589 / Is1239 Includingwelding, Fittingslikeelbows, Tees, Flanges, Tapers, Nuts Bolts, Gaskets Etc. And Fixing The Pipe On The Wall / Ceiling With Suitable Clamp / Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : 25 Mm Dia 9 32 Mm Dia 10 40 Mm Dia 11 50 Mm Dia 12 65 Mm Dia 13 80 Mm Dia 14 100 Mm Dia 15 150 Mm Dia 16 Providing, Laying, Testing&CommissioningofBClass Heavydutyg.I.Pipeconformingtois1239including Welding, Fittings Like Elbows, Tees, Flanges, Tapers, Nuts, Bolts, Gaskets Etc. And Fixing The Pipe On The Wall / Ceiling With Suitable Clamp / Support Frame And Painting With Two Ormorecoatsofsyntheticenamelpaintofrequired Shade Complete As Required: 25 Mm 17 32 Mm 18 40 Mm 19 50 Mm 20 65 Mm 21 80 Mm 22 100 Mm 23 150 Mm 24 Supplyingandfixingsingleheadedinternalhydrant Valve With Instantaneous Gunmetal / Stainless Steel Coupling Of 63 Mm Dia With Cast Iron Wheelisi Marked Conformingtois5290 ( Type-A ) Withblank Gunmetal / Stainless Steel Cap And Chain As Required :Single Headed Gunmetal 25 Supplying And Fixing Single Headed External Yard Hydrant Valve With 1 No. 63 Mm Dia Instantaneous Fm Gunmetal / Stainlesssteel Couplingand Cast Iron Wheel, Isimarked, Conformingtois5290 ( Typea ) Withblank Gunmetal / Stainless Steel Cap And Chain As Required :Single Headed Gunmetal 26 Supplying, Fixing, Testing And Commissioning Of Butterfly Valve Of Pn 1.6 Rating With Bronze / Gunmetal Seat Duly Isi Markedcompletewithnuts, Bolts, Washers, Gaskets Conforming To Is 13095 Of Following Sizes As Required :80 Mm Dia 27 100 Mm Dia 28 150 Mm Dia 29 Supplying, Fixing, Testing&Commissioningofdouble Flangedsluicevalveofratingpn1.6Withnonrising Spindle, Bronze / Gunmetalseat, Isimarkedcomplete With Nuts, Bolts, Washers, Gaskets And Conforming To Is 780 Of Following Sizes As Required : 80Mm Dia 30 100Mm Dia 31 150Mm Dia 32 200Mm Dia 33 250Mm Dia 34 Supplyingandfixingorificeplatemadeoutof6mm Thick Stainless Steel ( Grade 304 ) With Orifice Of Required Sizetobefitted Betweenflange&Landingvalveof Externalandinternalhydrantstoreducepressureat The Outlettothe Levelof 3.5Kg / Cm2 Complete As Required. 35 Providing, Installation, Testingandcommissioningof Non-Returnvalveoffollowingsizesconfirmingtois: 5312 Complete With Rubber Gasket, Gi Bolts, Nuts, Washers Etc.As Required.100Mm Dia 36 150Mm Dia 37 200Mm Dia 38 Providing, Installation, Testingandcommissioningof Stainlesssteely-Strainerfabricatedoutof1.6Mm Thickstainlesssteel, Grade304, Sheetwith3mmdia Holes With Stainless Steel Flange.150Mm Dia 39 200Mm Dia 40 Supplying And Fixing 63 Mm Dia, 15 M Long Rrl Hose Pipewith63mmdiamaleandfemalecouplingsduly Boundwithgiwire, Rivetsetc.Conformingtois636 ( Type-A ) As Required : Gun Metal 41 Supplying Andfixing First-Aidhosereelwithms Constructionspraypaintedinpostofficered, Conformingtois884completewiththefollowingas Required. A ) . 20Mmnominalinternaldiawaterhosethermoplastic ( Textile Reinforced ) Type -2 As Per Is: 12585 B ) .20Mmnominalinternaldiagunmetalglobevalve& Nozzle. C ) .Drum And Brackets For Fixing The Equipmets On Wall.D ) .Connections From Riser With 25 Mm Dia Stop Gun Metal Valve & M.S. Pipe And Socket. E ) .40 M 42 Supplying & Fixing 63 Mm Dia Gun Metal Short Branch Pipe With 20 Mm Nominal Internal Diameter Sizenozzle Conforming To Is 903 Suitable For Instantaneous Connection To Interconnect Hose Pipe Coupling As Required : Gun Metal 43 Supplyingandfixingoffirebrigadeconnectionof Cast Iron Body With Gun Metal Male Instantaneous Inlet Couplingscompletewithcapandchainasreqd.For Suitabledia Ms Pipe Connectionconforming To Is 904 As Required :2 Way-100 Mm Dia M.S. Pipe 44 4 Way - 150 Mm Dia M.S. Pipe 45 3 Way - 150 Mm Dia M.S. Pipe 46 Supplying And Fixing Air Vessel Made Of 250 Mm Dia, 8 Mm Thick Ms Sheet, 1200 Mm In Height With Air Release Valveontopandflangedconnectiontoriser, Drain Arrangementwith25mmdiagunmetalwheelvalve Withrequiredaccessories, Pressuregaugeand Paintingwith Synthetic Enamel Paint Of Approved Shade As Required. 47 Providing, Fixing, Testing & Commissioning Of 15Mm Dia Quartzoidbulbtypesprinklersofrating68degree Centigrade With Required Accessories :Pendent Sprinkler 48 Upright Sprinkler 49 Horizontal Side Wall Sprinkler 50 Concealed Sprinkler 51 Providing & Fixing Of Pressure Switch In M.S. Pipe Line Including Connection Etc. As Required. 52 Providing& Fixingflowswitchinfollowingsizesm.S. Pipe Including Connection Etc As Required. 53 100Mm Dia 54 150Mm Dia 55 Providing, Fixing, Testing & Commissioning Of Installationcontrolvalveofcastironbody, Brass / Bronzeworking Partscomprisingofwater Motor Alarm, Bronzeseatclapper, Clapperarmand Hydraulicallydrivenmechanicalgongbelltosound Continuousalarmwhenthewetriser / Sprinklersystem Activates, Pressuregauges, Emergencyreleases, Strainer, Pressureswitch, Cockvalvecompletewith Drainvalveandbypass, Testcontrolbox, Ballvalves, Ms Pipe Of Required Size, Flanges, Orifice Plate, Gasket Etc Of Follwing Sizes Asrequired : 150Mm Dia 56 Supplying, Installation, Testing & Commissioning Of Sprinklerflexiblepipe ( Ullisted ) Ofstainlesssteel Complete With 15 Npt On Reducer Thread With Maximum Working Pressure Of 175 Psi Test Pressure Of 875Psi ( Burst ) Withbranchline ( Inlet ) 25Mmnpt Malethreadtosprinklerhead ( Outlet ) 15Mmnpt Femalethreadwithreducer, Nipple, 2Sidebrackets, Center Bracket, Stockbar Of Following Sizes Complete As Required.700Mm 57 1000Mm 58 1200Mm 59 1500Mm 60 Providing And Fixing In Position The Industrial Type Pressure Gauges With Gun Metal / Brass Valves Complete As Required ( E&M ) 61 Providing And Fixing Ms Cabinet ( Size 750X600x250 Mm ) Fabricated From 16 Gauge Ms Sheet With Full Front Glass Door & Locking Arrangement For Pad Lockwith Suitable Shelves For Keeping 25 Nos. Spare Sprinklers & One No. Spanner Properly Fixed In Shelves. Cabinet Shall Be Painted With Enamel Paint Of Approved Shade. ( Cost Shall Include 20 Nos. Spare Sprinklers ( 5 Nos Side Wall 20Nos Pendent, One No. Spanner And 5 Rolls Of Teflon Tape ) . Note: All Valves Shall Be Of Pn16 Rating 62 Portable Fire Extinguishers: Providing & Fixing Of Isi Marked ( Is:15683 ) Portable Fire Extinguisher, Carbondioxide Type Flat Base Including Valve, Discharge Hose Of Not Less Than 10 Mm Dia. 1 M Long & Complete In All Respects Including Initial Fill With Co2 Gas Confirming To Is:307-1966 Filled To A Filling Ratio Of Not More Than 0.667 Of Not More Than 0.667 And Wall Suspension Bracket Capacity 4.5 Kg 63 6 Kg. Abc Powder Type Fire Extinguishers Are Manufactured And Marked To Indian Standard Is: 15683. Suitable First Aid Appliance For Fighting Fires In Class A, B & C Fire That Is Wood, Textile, Flammable Liquids & Gases. 64 Providing And Fixing Mechanical Foam Type Fire Extingushers Consisting Of Welded M.S. Trolley Mounted Cylindrical Body, Squeeze Lever Discharge Valve Fitted With Pressure Discharge Hose, Discharge Nozzle, Trolley Etc., Isi Marked As Per Is:Is:13386 Finished Externally With Red Enamel Paint.Capacity 50 Lit ( D.G.Room ) 65 Providing And Fixing Carbon-Di-Oxide Fire Extingushers Trolley Mounted With All Accessories Internal Discharge Tube, High Pressure Discharge Hose, Discharge Nozzle, Isi Marked As Per Is:2878 Finished Externally With Red Enamel Paint. Capacity 22.5 Kg. 66 Boq-D: Plumbing Pump & Equipmentswater Supply, Drainage, Pumps & Equipment :Providingand Fixing Centralized Water Level Controller Cum Indicator System, As Per The Following Details:Centralised Plc Control Panel : Along With Touch-Screen Display Board ( Min. 8 Diag. Size ) Along With All Accessories For Complete Controls & Indication. Panel Shall Be Made Out Of Crca Sheet Min. 2Mm Thick Having Necessary Interlocks, I / OS, Required Number Of Repeater Amplifiers, All Audio-Visual Alarms As Required Specifications As Listed Below. An Emergency Stop Push Button Shall Be Provided In The Panel. The Panel Shall Have Modbus Compatibility For Seamless Bms / Bas Integration And Shall Be Of Approved Make. The Complete System Control Matrix, Wiring Diagram, SldS And Technical Details Shall Be Submitted By The Vendor And Gotten Approved Before Commencement Of Execution Of Works. Water Level Indicators Cum Controllers :Working On Hydrostatic Pressure Measurement Principle Made Of Stainless Steel For Installation On Storage Tanks, And Capable Of Providnig 4 To 20 Ma Analog Signal Compatiblewith Plc Signal Inputs And Completeas Per Working Requirements For Details Of Equipment Below. All Control Outputs To Mcc Panel Shall Be Included As Per Requierments. A ) .Fire Static Underground Tanksb ) .Real-Time Water Level Indication Monitoring 67 V. Low Level Audio-Visual Alarm At Less Than 25% Total Capacity.Raw Water Underground Tanksreal-Time Water Level Indication Monitoring V. Low Level Audio-Visual Alarm At Less Than 30% Total Capacity. V. High Level Audio-Visual Alarm At More Than 100% Total Capacity.Auto Cut-In Of Tubewell Pumps At 35%Auto Cut-Out Of Tubewell Pumps At 95% 68 Auto Cut-Out Of Raw Water Pumps At 35%Domestic Water Underground Tanks Real-Time Water Level Indication Monitoring V. Low Level Audio-Visual Alarm At Less Than 30% Total Capacity. V. High Level Audio-Visual Alarm At More Than 100% Total Capacity. Auto Cut-In Of Raw Water Pumps At 35% 69 Auto Cut-Out Of Domestic Water Pumps At 35% Flushing Water Underground Tanks At Stpreal-Time Water Level Indication Monitoringv. Low Level Audio-Visual Alarm At Less Than 30% Total Capacity.V. High Level Audio-Visual Alarm At More Than 100% Total Capacity.Auto Cut-In Of Raw Water Pumps ( From Stp ) At 35% 70 Auto Cut-Out Of Flushing Water Pumps At 35% Domestic Water Overhead Tanksreal-Time Water Level Indication Monitoring V. Low Level Audio-Visual Alarm At Less Than 30% Total Capacity. 71 V. High Level Audio-Visual Alarm At More Than 100% Total Capacity. Flushing Water Overhead Tanksreal-Time Water Level Indication Monitoring V. Low Level Audio-Visual Alarm At Less Than 30% Total Capacity. 72 V. High Level Audio-Visual Alarm At More Than 100% Total Capacity. 73 Providing Complete Testing Kit With All Chemicals Complete Suitable For Conducting Test On Water Quality.The Test Kit Shall Be Suitable To Measure Tds, Ph, Hardness, Iron Content And Other Parameters 74 Hydro-Pneumatic Pumping System For Domestic Supply To Fixture ( Toilet Kitchen ) : Providing, Fixing And Testing Of Packaged Type Skid Mounted Hydropneumatic System With Variable Frequency Drive Type Comprising Of : ( I ) Vertical, Inline Multistage Centrifugal Pumping Set With Stainless Steel Ss-304Stage Casing And Ss-304 Impellers With Stainless Steel Ss-304 Shaft As Per Iecstandards And Gjl250 Cast Iron Suction& Discharge Casing, Connected To Tefc Ventilated Induction Motor Of2 Pole, 2900Rpm, Suitable For 400 / 440 Volts, 3 Phase, 50 Hz A.C. Supply. ( Ii ) Pressure Vessel Of Non Corrosivefrp Composite Construction Lined With Nsf And / Or Fda Listed Material, Likehigh Density Polyethylene With Fully Replaceable Polyurethane. Air Cell Burstpressure Of Minimum Of 5 Times The Vessel Operating Pressure And Cycle Tested For 2, 50, 000 Cycles. ( Iii ) Control Panel With Programmable Logic Controller ( Plc ) For Cyclic Operation Of Pumps + Variable Frequency Drive. The Pump Workingsequence Should Change After Every Operation.Contractor Overload Relays And Mcbs Should Confirm To Iec 898 – 1995 / Specifications. Blinking Indications For Pumps Start, Trip, Low Level Trip, Health Supply Should Be Provided In The Panel Along With The Ammeter& Voltmeter. Control Panel Should Also Consist Of Cooling Fan. ( Iv ) Pressure Switches Bellowtypefittedwithmicro Switch And Having Maximum Pressure And Differentialscaleshould Confirming Bs-6134 Standards And Ip55 Protection Class. ( V ) All Required Ball Valves, Non-Return Valves, Flexible Connectors Etc. And All Required Accessories, Heavy Duty S.S 316 Manifold To Make The System Completely Operational As A Skid Mounted System. Ball Valves Tobe Used Should Be Hot Pressed Brass Ot-58Withstainless Steelballand P.T.F.Eseal And O-Ring. Nrvs To Be Used Shouldbewithspringsando-Ring Arrangement. ( Vendor To Submit Performance Curves And Technical Catalog Of The Proposed Model For Review & Information ) Complete Manifold System Shall Be Factory Aasembled & Totally Mounted On A Common Base Frame With Following Duties:Note: Contractor To Note That The Suction Header Is Required To Have Inlet Connection From The Puddle Flange @ Water Tanks And To The Pump Suction. Provision Of Delivery Header Is Required To Have Outlet Connection From The Pumps. Suitable Outlet Flanges From The Delivery Mainfold / Header Shall Be Provided As Required.A.For Domestic Water Supply For Club & Benquet Hall: No. Ofpumps :1 ( 1 Working +1 Standby ) Capacity: 350 Lpm Each Pump Head: 55 Meters Apx. Hp ( Motors ) : 3 Hp Location : Plumbing Plant Room 75 For Flushing Water Relift Pump :No. Ofpumps :1 ( 1 Working +1 Standby ) Capacity: 250 Lpm Each Pump Head: 55 Metersapx. Hp ( Motors ) : 2 Hplocation : Stp Plant Room 76 Garden Hydrents & Floor Washing Relift Pump:Providingand Fixing Vertical, Inline Multistage Centrifugalpumpingset ( Complete Manufactured Skid-Mounted Arrangement With Manifold And Accessories ) Withstainlesssteelss-304Stage Casingandss-304Impellerswith Stainless Steel Shaft As Per Iec Standards And Gjl250 Cast Iron Suction & Discharge Casing, Connected To Tefc Ventilated Induction Motor Of 2 Pole, 2900 Rpm, Suitablefor 400 / 440 Volts, 3 Phase, 50 Hz A.C. Supply With Pressure Gauge And With Gunmetal Isolationcocks, Vibrationelimination Pads Etc. Complete With Base And Frame, Nuts And Boltsandnecessary Rcc Foundations As Per Requirementasper Instructionsandpumpshallhave Following Duty:No. Ofpumps :2 ( 1 Working +1 Standby ) Capacity: 200 Lpm Each Pumphead: 45 Metersapx. Hp ( Motors ) : 4 Hplocation : Stp Plant Room 77 Supply, Installation, Testing & Commissioning Of Continuous Duty Submersible Centrifugal Non-Clogging Drainage Pumps Of Efficiency Of Approved Make Complete With 3 Phase Motor With All Necessary Protection And Mechanical Seal Etc. Complete With All Ancillaries Including Float Type Level Controllers, Electrical Control Panels Fabricatd From 14 Gauge Crca Sheet Volt Meter Ammeter With Selector Switch, Tpmcb, 5 Va Cl : Cts, Phase Indicating Lamps Protected By 2 Amp Sp Mcb, Dol Starter, Necessary Wiring, Cable Alleys, Earthing, Interlocking, Starter With Automatic Float Type Level Controller, Providion Of High Level Alarm, Sequence Timer, Potential Free Contact To Starter For Connection To Bas, Both Pumps May Run Simultaneously At Pre Determind Level. ( 1 Working + 1 Standby ) Vendor To Submit Proposed Pump Model With Duty Curve.A ) . For Wtp & Stp Plant Room Drainage :Flow Rate : 450 Lpm Head : 15 Mtssolid Handling : 100 Mmlocation : Sump Of Basement Purpose : Plant Room & General Area Drainage Moc : Ss Body Ss Impeller & Shaft 78 B ) .For Basement Drainage : Flow Rate : 450 Lpm Head : 15 Mts Solid Handling : 100 Mmlocation : Sump Of Basement Purpose : Basement Area Drainage Moc : Ss Body Ss Impeller & Shaft 79 C ) .Manhole Cover For U.G Tanks And Sumps :Supplying And Fixing C.I. Cover Without Frame For Manholes :560Mm Diameter C.I Cover ( Heavy Duty ) The Weight Of The Cover To Be Not Less Than 108Kg. 80 F ) .Providing And Fixing Stainless Steel Ladder, Wall Mounted Of 4M Height ( App ) For Underground Tanks Complete With Flanged Ends And Inserts ( Removable Type ) Made Of 38Mm / 42Mm Dia 16 G S / S 304 Quality Pipe Made As Per International Quality Standards Of Approved Shape And Size With Non Skidding Stepsat 300Mm Vertical Spacing, Completeas Directed By The Engineer In Charge. 81 Water Treatment Plant: Providing & Fixing Vertical, Inline Multistage Centrifugalpumping Set ( Complete Manufactured Skid-Mounted Arrangement With Manifold And Accessories ) With Stainlesssteel Ss-304 Stage Casing And Ss-304 Impellers With Stainless Steel Shaft As Per Iec Standards And Gjl250 Cast Iron Suction & Discharge Casing, Connected To Tefc Ventilated Induction Motor Of 2 Pole, 2900 Rpm, Suitable For 400 / 440 Volts, 3 Phase, 50 Hz A.C. Supply With Pressure Gauge And With Gunmetal Isolation Cocks, Vibration Elimination Pads Etc. Complete With Base And Frame, Nuts And Bolts And Necessary Rcc Foundations As Per Requirement As Per Instructions And Pump Shall Have Following Duty:A ) .For Club Building Only : No. Ofpumps: 2 ( 1 Working + 1 Standby ) Flow Rate :150 Lpm Each Head : 30 Mtsrequired For : Filter Feed Pump In Plumbing Plant Room ( 1Working + 1Standby ) 82 Providing And Fixing Vertical Pressure Filter With Dual Media Filter ( Comprising Of 600Mm Bed Depth Of Graded Sand Gravel And 600Mm Bed Depth Of Anthracite ) Fabricated From High Performance M.S Plate Of Minimum 8Mm Thick For Shell & 10Mm Thickfor Dished Ends With Top And Bottom Flanged Openings Including Top And Bottom Hub And Lateral Distribution And Collection System Complete With Initial Charge Of Filter Media, Face Piping, Valves, Accessories, Painting, Testing And Commissioning Complete. ( Tested To 6 Kg / M2 ) Discharge : 150 Lpm Filtration Rate: 17500 Lit. / M2 / H Discharge : 150 Lpm Suggested Dia App.: 0.90 M 83 Activated Carbon Filter ( Domestic Water ) : Providing And Fixing Vertical Activated Carbon Filter Comprising Ofactivated Carbon Filter Media Fabricated From High Performance M.S Plate Of Minimum 8Mm Thick For Shell & 10Mm Thickfor Dished Ends With Top And Bottom Flanged Openings Including Top And Bottom Hub And Lateral Distribution And Collection System Complete With Initial Charge Of Filter Media, Face Piping, Valves, Accessories, Epoxy Painting, Testing And Commissioning Complete. ( Tested To 6 Kg / M2 ) Discharge :100 Lpm Filtration Rate: 15000 Lit. / M2 / H Suggested Dia App.: 0.60 M 84 Providing, Fixing, Testing & Commissioning Of Msep Water Softening Plant ( Suitable For 3 Kg / Sqcm Workingpressure ) Complete With Initial Charge With T-40 Na Resin, Multiport Valve With Built In Ejector For Controlling All Operations ) , Regeneration System And Hdpe Tank, Pressure Gauge At Inlet, Outlet And Back Wash ( Each With Isolation Cock ) , Valves, Fittings And Water Hardness Testing Kit & Associatedworks. Softener Shall Be Suitable For The Following Duty:Note:The Successful Contractor Will Have To Carry Out A Test Of Raw Water From All The Sources Of Water For The Commercial, Residential & Apartment At Their Own Cost From A Reputed Lab As Approved By The Engineer-In-Charge / Consultant. On The Basis Of These Results The Contractor Has To Submit His Shop Drawings, Design Calculations And Specifications Accordingly.Please Note That It Is Ultimately The Responsibility Of The Contractor To Provide Treated Water For Different Use As Per International Standard As Given In The Attached Guidelines. Raw Water Hardness: 500 Mg / Ltreated Water Hardness:100 Mg / L Regeneration Period:12 Hrs.Capacity : 100 Lpm 85 Supplying, Installing, Testing And Commissioning Of Dosing System ( For Domestic Water Treatment Plant ) Consisting Of One Hdpe Tank Of 100 Litres Capacity With A Positive Displacement Diphragm Dosing Pump Having Variable Flowrate Of 0-6 Lph. The Motor Shall Be Suitable For Operation At 240 V / Single Phase / 50 Hz. Supply. The Pump Shall Be Supplied Complete With Necessary Polypropylene Piping, Valves, Strainers, Low Level Switch Andinjection Fittings. The Pump Shall Be Speed & Stroke Control Asialmi / Equivalent Make. The Cost Shall Be Inclusive Of Providing Salt For The Testing And Operation Of System Before Handover To The Owner. 86 Plumbing Panel: Design, Manufacture, Assembly, Wiring, Testing At Works And Supply To Site Of Following Panels / Distribution Boards / Switch Boards. The Boards Shall Be Designed And Fabricated As Per General Specifications, Technical Details, Specifications And Notes As Part Of This Tender / Boq And Relevant Bis Codes. ( Any Load Veriation In System As Technical Document Of Manifactureno Cost Shall Be Paid Extra For System Requirments ) Ip Rating: Ip 54 Incomer:1 No. 250 A 25 Ka, 3P Mccb Of Motor Duty - Only Magnetic Release. ( Adjustable Magnetic Release Upto 250A Mccb Or Micro-Processor Based Release Above 250A Mccb ) .Incomer Metering & Indication: A ) .415V / V3 / 110V / V3ptS, Cast Resin Type, 3 Phase For Metering & Indications, Suitable Rated 6A, Tp Mpcb Of The Fault Withstand Capacity As Of The Panel On The Primary Side Of Pt & Suitable Rated 6A, Tp Mcb On The Secondary Side Of Pt.B ) .R, Y, B Phase Indication Lamps ( 110V ) Led Type C ) .Cast Resin Metering CtS For Each Phase Of Class-1 Accuracy & Of Suitable Burden & Ratio D ) .1 No. Digital Vaf + Pf Meter ( 110V ) ( *With / Without Rs 485 Port ) Bus Bars : 400A, Tp, Aluminium Bus Bars Of Electrolytic Grade With Heat Shrinkable Sleeves 25 Ka. Control Transformer & Control Circuiting For Starters / Contactors & Indication Lamps : A ) .1 No. 415V / 55-0-55Vcast Resin Dry Type Control Transformer Of Adequate Va Burden To Take Care Of Load Of All The Contactor Coils. ( Transformer With Primary Taps At ± 2.5%, ± 5%, 50 Hz, Centre Tap Earthed ) .B ) .Suitable Rated 6A, Dp, Mpcb Of The Fault Withstand Capacity As Of The Panel For Control Circuiting For Contactors Coils On The Primary Side Of Control Transformer & Suitable Rated 6A, Dp Mcb On The Secondary Side Of Control Transformer.C ) .110V Control Circuiting D ) .110V Control Supply Healthy Indication ( Led Type ) .Outgoings: A ) .Dol Starter Comprising The Following ( For Upto 2 Hp Motors ) For Raw Water Pumps / Treated Water Transfer Pump / Flushing Water Transfer Pump / Borewell / Soft Water Transfer Pump / For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan:A ) . For 1Hp. ( 2 Nos. ) ( Chamical Dosingpump ) B ) .Type-2 Co-Ordinationc ) . 1 No. Suitable Rated Tp Mpcb, 10Ka, With Inbuilt O / L Relay & Inbuilt Spp Feature ( Site Adjustable ) D ) .Suitable Sized 3P Contactor With 2 No & 2 Nc Auxiliary Contactse ) . On / Off / Trip Indication Lamps ( 110V ) ( Led Type ) F ) .On / Off Push Buttons G ) Star-Delta Timerh.2 Pole A / M Selector Switch For Bms Application I ) .Suitable Rated Single Cast Resin Ct For Metering On Y Phase, Of Class-1 Accuracy & Of Suitable Burden & Ratio. J ) .Digital Ammeter K ) .On / Off-Trip / A / M Potential Free Contacts For Bmsl ) .Control Wiring Terminals For Auto Operation Through Potential Free Contacts Ofwater Tank Level Controllers.B ) .Dol Starter Comprising The Following ( For 3 Hp To 5 Hp Motors ) For Raw Water Pumps / Treated Water Transfer Pump / Flushing Water Transfer Pump / Borewell / Soft Water Transfer Pump / For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan :A ) For 4 Hp. ( 2 Nos. ) ( For Pump Room Exhaust Air Fan ) B ) Type-2 Co-Ordination C ) 1 No. Suitable Rated Tp Mpcb, 25 Ka, With Inbuilt O / L Relay & Inbuilt Spp Feature ( Site Adjustable ) D ) Suitable Sized 3P Contactor With 2 No & 2 Nc Auxiliary Contactse ) On / Off / Trip Indication Lamps ( 110V ) ( Led Type ) F ) 2 Pole A / M Selector Switch For Bms Application G ) Suitable Rated Single Cast Resin Ct For Metering On Y Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratioh ) Digital Ammeter With Inbuilt Selector Switch I ) Digital Ammeter J ) On / Off-Trip / A / M Potential Free Contacts For Bmsk ) Control Wiring Terminals For Auto Operation Through Potential Free Contacts Ofwater Tank Level Controllers.C ) .Dol Starter Comprising The Following ( For 7.5 Hp To 10 Hp Motors ) For Raw Water Pumps / Treated Water Transfer Pump / Flushing Water Transfer Pump / Borewell / Soft Water Transfer Pump / For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan:A ) For 7.5Hp. ( 2 Nos. ) ( Raw Water / Filter Feedpump ) B ) . For 6 Hp. ( 2 Nos. ) ( Soft Water Reliftingpump ) C ) .Type-2 Co-Ordinationd ) .1 No. Suitable Rated Tp Mpcb, 10 Ka, With Inbuilt O / L Relay & Inbuilt Spp Feature ( Site Adjustable ) E ) .Suitable Sized 3P Contactor With 2 No & 2 Nc Auxiliary Contacts F ) .On / Off / Trip Indication Lamps ( 110V ) ( Led Type ) G ) .On / Off Push Buttons ( With Lockable Off ) H ) . Pole A / M Selector Switch For Bms Application I ) .Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratioj ) .Digital Ammeter With Inbuilt Selector Switch K ) On / Off-Trip / A / M Potential Free Contacts For Bms L ) .Control Wiring Terminals For Auto Operation Through Potential Free Contacts Ofwater Tank Level Controllers. D ) .Star-Delta Starter Comprising The Following ( For 12.5 Hp To 25 Hp Motors ) For Raw Water Pumps / Treated Water Transfer Pump / Flushing Water Transfer Pump / Borewell / Soft Water Transfer Pump / For Pump Room Fresh Air Fan / For Pump Room Exhaust Air Fan:A ) .12.5 Hp. ( 3 Nos. ) ( Tubewells Pump ) B ) .Type-2 Co-Ordinationc ) .1 No. Suitable Rated Tp Mpcb, -----Ka, Without Inbuilt O / L Relay ( Only Magnetic ) D ) .Suitable Sized 3P Contactors ( Star, Delta & Run Contactors ) With 2 No & 2 Nc Auxiliary Contactse ) Suitable O / L Relay With Inbuilt Spp F ) .On / Off / Trip Indication Lamps ( 110V ) ( Led Type ) G ) .2 Pole A / M Selector Switch For Bms Application H ) .Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratioi ) Digital H Inbuilt Selector Switch J ) On / Off-Trip / A / M Potential Free Contacts For Bms K ) Control Wiring Terminals For Auto Operation Through Potential Free Contacts Ofwater Tank Level Controllers. Feeders ( Without Starters ) For Hydronumatic Pump Panels :1 No. Suitable Rated 15 Ka, Tp, Mpcb Without Inbuilt O / L Relay & With 1 No + 1 Nc Auxiliary Contacts & On Indication Lamp 110V ( Led Type ) For 10 Hp Sump Pump Panel. Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratio. Digital Ammeter With Inbuilt Selector Switch. Feeders ( Without Starters ) For Sump Pump Panels : 2 No. Suitable Rated 15 Ka, Tp, Mpcb Without Inbuilt O / L Relay & With 1 No + 1 Nc Auxiliary Contacts & On Indication Lamp 110V ( Led Type ) For 15 Hp Sewarage Sump Pump Panel. Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratio. Digital Ammeter With Inbuilt Selector Switch. Feeders ( Without Starters ) For R.O Water Booster Pump Panels : 1 No. Suitable Rated 10 Ka, Tp, Mpcb Without Inbuilt O / L Relay & With 1 No + 1 Nc Auxiliary Contacts & On Indication Lamp 110V ( Led Type ) For 3 Hp R.O Waterbooster Pump Panel. Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratio. Digital Ammeter With Inbuilt Selector Switch.Spare Starter Feeders ( Without Starters ) With Same Components As Described In Above Written Similar Starter Feeders:5 Hp Motors, Dol Starter ( 2 Nos. ) ( Spare Feeders ) Spare Motor Feeders ( Without Starters ) With Same Components As Described In Above Written Similar Feeders: 2 No. Suitable Rated 15 Ka, Tp, Mpcb Without Inbuilt O / L Relay & 1 No + 1 Nc Auxiliary Contacts & On Indication Lamp ( 110V ) Led Type For 10 Hp Feeder. Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratio. Digital Ammeter With Inbuilt Selector Switch. 1 No. Suitable Rated 10 Ka, Tp, Mpcb Without Inbuilt O / L Relay & 1 No + 1 Nc Auxiliary Contacts & On Indication Lamp ( 110V ) Led Type For 5 Hp Feeder. Suitable Rated Cast Resin CtS For Metering On Each Phase, Of Class-1 Accuracy And Of Suitable Burden & Ratio. Digital Ammeter With Inbuilt Selector Switch.Vendor Can Also Consider Integrated Total Co-Ordinated Starter Upto 15Hp.Plumbing Panel As Described Above. 87 Sump Pump Panel ( Upto 5.0Hp Motor ) : A ) .It Shall Control Two Pumps P-1 And P-2. The Operation Sequence Will Be As Under :B ) .P-1 & P-2 To Stop At L-1 C ) .P-1 To Start At L-2 D ) .P-2 To Start At L-3 ( At L-3 Both Pump Will Be Running ) Audible Alarm At L-4 ( 50 Mtr Range ) .E ) .Hooter For Annunciation ( Solid State Buzzer ) F ) .Where L-1 < L-2 < L-3 < L-4 ( Level Of Water In The Sump ) ( Probes / Sensors To Control Operation ) G ) .There Shall Be Selector Switch To Interchange The Starting Sequence Between P1 & P2. ( Selection Mode ) Important Features : Sump Pump Panel Shall Have Following Essential Features: R, Y, B Phase Indicating Lamps With Backup. Auto / Manual Selector Switch. Starter On / Off & High Level Indications, Digital Ammeters For Both Pumps. Mpcb With Inbuilt O / L & Spp, Dol Starter And Dry Run Protection Suitable For Motors And As Per Details Given Below : Incomer:1 No. Suitable Rated 35 Ka, Tp, Mpcb Without Inbuilt O / L & With 1No + 1Nc Auxiliary Contacts For Total 10 Hp Of Sump Pumps ( Both Pumps Working Simultaneously ) .Incomer Metering & PtS :415V / V3 / 110V / V3ptS, Cast Resin Type, 3 Phase For Metering & Indications, Suitable Rated 6A, Tp Mpcb Of The Fault Withstand Capacity As Of The Panel On The Primary Side Of Pt & Suitable Rated 6A, Tp Mcb On The Secondary Side Of Pt. 3 Nos. Cast Resin CtS Of Adequate Class, Burden & Ratio At The Incomer Metering.R, Y, B ( 110V Ac ) Led Lamp & On / Off Indications ( 110V Ac ) Led Type.Digital Vaf Meter At The Incomer ( 110V ) . Control Transformer & Control Circuiting For Starters / Contactors & Indication Lamps : A ) .1 No. 415V / 55-0-55Vcast Resin Dry Type Control Transformer Of Adequate Va Burden To Take Care Of Load Of All The Contactor Coils. B ) .Suitable Rated 6A, Dp, Mpcb Of The Fault Withstand Capacity As Of The Panel For Control Circuiting For Contactors Coils On The Primary Side Of Control Transformer & Suitable Rated 6A, Dp Mcb On The Secondary Side Of Control Transformer. ( Transformer With Primary Taps At ± 2.5%, ± 5%, 50 Hz, Centre Tap Earthed ) . C ) .110V Control Circuitingd ) .110V Control Supply Healthy Indication ( Led Type ) .E ) .Pt Of Adequate Burden Can Also Be Used For Powering Contactor Coils Of Starters And In That Case Control Transformer Can Be Eliminated. Bus Bars : 100A, Tp, Aluminium Bus Bars Of Required Capacity & Ka Rating With Heat Shrinkable Sleeves.Outgoings:Sump Pump Panel ( Upto 5.0Hp Motors ) : 2 Sets Suitable Rated 15 Ka, Tp, MpcbS With Inbuilt O / L Relay & Inbuilt Spp Features ( Site Adjustable ) & With 1No + 1Nc Auxiliary Contacts For 5Hp Each Sump Pump Motor & Each Set With The Following:A ) .Suitable Sized 3P Contactor With 2No + 2Nc Auxiliary Contacts B ) .On / Off / Trip Led Indications ( 110V ) C ) .On / Off Push Buttons D ) .2 Pole A / M Selector Switch For Bms Application E ) .Suitable Rated Single Cast Resin Ct For Metering On Y Phase, Class-1 Accuracy & Of Suitable Burden & Ratio. F ) . Digital Ammeter G ) .On / Off / Trip / A / M Potential Free Contacts For Bmsh ) .3 Nos. Suitable Water Level Controllers With Three Electrodes ( 110Ac ) The Sump Pump Control Panel Shall Be Complete With All Interconnections, Water Level Controllers & Sensors / Probes, Risers, Internal Wiring, Labels, Terminal Block Etc Complete As Required. 88 Sump Pump Panel ( For 7.5Hp To 10.0Hp Motor ) : A ) .It Shall Control Two Pumps P-1 And P-2. The Operation Sequence Will Be As Under :B ) .P-1 & P-2 To Stop At L-1 C ) .P-1 To Start At L-2 D ) .P-2 To Start At L-3 ( At L-3 Both Pump Will Be Running ) Audible Alarm At L-4 ( 50 Mtr Range ) .E ) .Hooter For Annunciation ( Solid State Buzzer ) F ) .Where L-1 < L-2 < L-3 < L-4 ( Level Of Water In The Sump ) ( Probes / Sensors To Control Operation ) G ) .There Shall Be Selector Switch To Interchange The Starting Sequence Between P1 & P2. ( Selection Mode ) Important Features : Sump Pump Panel Shall Have Following Essential Features: R, Y, B Phase Indicating Lamps With Backup. Auto / Manual Selector Switch. Starter On / Off & High Level Indications, Digital Ammeters For Both Pumps. Mpcb With Inbuilt O / L & Spp, Dol Starter And Dry Run Protection Suitable For Motors And As Per Details Given Below : Incomer:1 No. Suitable Rated 35 Ka, Tp, Mpcb Without Inbuilt O / L & With 1No + 1Nc Auxiliary Contacts For Total 10 Hp Of Sump Pumps ( Both Pumps Working Simultaneously ) .Incomer Metering & PtS :A ) .415V / V3 / 110V / V3ptS, Cast Resin Type, 3 Phase For Metering & Indications, Suitable Rated 6A, Tp Mpcb Of The Fault Withstand Capacity As Of The Panel On The Primary Side Of Pt & Suitable Rated 6A, Tp Mcb On The Secondary Side Of Pt. B ) .3 Nos. Cast Resin CtS Of Adequate Class, Burden & Ratio At The Incomer Metering.C ) .R, Y, B ( 110V Ac ) Led Lamp & On / Off Indications ( 110V Ac ) Led Type.D ) .Digital Vaf Meter At The Incomer ( 110V ) . Control Transformer & Control Circuiting For Starters / Contactors & Indication Lamps : A ) .1 No. 415V / 55-0-55Vcast Resin Dry Type Control Transformer Of Adequate Va Burden To Take Care Of Load Of All The Contactor Coils. B ) .Suitable Rated 6A, Dp, Mpcb Of The Fault Withstand Capacity As Of The Panel For Control Circuiting For Contactors Coils On The Primary Side Of Control Transformer & Suitable Rated 6A, Dp Mcb On The Secondary Side Of Control Transformer. ( Transformer With Primary Taps At ± 2.5%, ± 5%, 50 Hz, Centre Tap Earthed ) . C ) .110V Control Circuitingd ) .110V Control Supply Healthy Indication ( Led Type ) .Pt Of Adequate Burden Can Also Be Used For Powering Contactor Coils Of Starters And In That Case Control Transformer Can Be Eliminated. Bus Bars : 100A, Tp, Aluminium Bus Bars Of Required Capacity & Ka Rating With Heat Shrinkable Sleeves.Outgoings:Sump Pump Panel ( For7.5Hp To 10.0Hp Motor ) : 2 Sets Suitable Rated 15 Ka, Tp, MpcbS With Inbuilt O / L Relay & Inbuilt Spp Features ( Site Adjustable ) & With 1No + 1Nc Auxiliary Contacts For 5Hp Each Sump Pump Motor & Each Set With The Following:A ) .Suitable Sized 3P Contactor With 2No + 2Nc Auxiliary Contacts B ) .On / Off / Trip Led Indications ( 110V ) C ) .On / Off Push Buttons D ) .2 Pole A / M Selector Switch For Bms Application E ) .Suitable Rated Single Cast Resin Ct For Metering Oneach Phase Of Class-1 Accuracy & Of Suitable Burden & Ratio. F ) . Digital Ammeter G ) .On / Off / Trip / A / M Potential Free Contacts For Bmsh ) .3 Nos. Suitable Water Level Controllers With Three Electrodes ( 110Ac ) The Sump Pump Control Panel Shall Be Complete With All Interconnections, Water Level Controllers & Sensors / Probes, Risers, Internal Wiring, Labels, Terminal Block Etc Complete As Required. 89 Sewage Treatment Plant:Sewage Treatment Plant Based On Mbbr ( Moving Bed Bio Reactor ) Technology :Supply, Installation, Testing And Commissioning Of Package Type Pre-Fabricated Sewage Treatment Plant Based On Mbbr Technology ( Moving Bed Aerobic Bio-Reactor ) Of 65 Kld Capacity Including All Ms Structure, Mechanical, Electrical And Instrumentation Works As Per Technical Specification Mentioned In The Document. The Scope Shall Also Include To Provide The Ss Bar Screen In Grit Screen Chambers, Grease Separator, Primary & Secondary Treatment Of Waste Water, Air Blowers, All Necessary Interconnecting Piping & Valves, Pumps, Dmf And Acf Filters, Chlorinator, Ultravoilet Dis-Infection Unit, Mcc For Operation Of All Motors, All Inter Connecting Power And Control Wiring, Level Controllers & Other Controls, Ms Puddle Flange ( Hot Dip Galvanized After Fabrication ) , Inlet, Outlet, Overflow, Vent, Manhole Cover Etc, Completed In All Respect In Ready To Use And Easy To Transport Condition. ( The Entire System Tobe Installed Above Ground ) .A ) .Nature Of Effluent - Domestic Sewage From Toilets / Kitchen.B ) .Flow Rate - 65 Kld C ) .Sewage Incoming Characteristics D ) .Ph - 6.5 - 8.5 E ) .Bod5 - Upto 250 - 400 Mg / L F ) .S. Solid - 250 To 450 Mg / Lg ) .Cod 5 - Upto 600 Mg / L H ) .Oil & Grease - 50 Mg / L I ) .Effluent Discharge Standard After Treatment J ) .Ph - 6.5 - 7.5K ) .Bod5 - Less Than 10 Mg / L L ) .S. Solids - Less Than 10 Mg / L M ) .Cod - Less Than80 Mg / L N ) .Oil & Grease - Less Than 5 Mg / L Sewage Treatment Plant Shall Include The Following Items:A ) .Oil & Grease Chamber B ) . Sewage Equalization Tank C ) .Mbbr Tank ( Moving Bed Bio Reactor ) D ) .Tube Settling Tanke ) .Sludge Holding Tank F ) .Chlorine Contact Tank G ) .Filtration Through Mgf, Acf, Chlorinator & Uv Sterlizerh ) .Air Blowers, Pumps & Equipmenti ) .Filter Pressj ) .Piping, Valves Etc K ) .Electrical Panel & Cablingl ) .All Piping, Valves & Level Indicator / Controller Etc. Within Plant Room. Note: A ) .Contractor Shall Ensure Submission Of Detailed Civil General Arrangement Drawings ( Plan & Section ) , P & I ( Programming & Instrumentation ) Diagram, Schematic Diagram For The Above Mention Component & Additional Component Such As Inserts, Puddle Flanges, Vent Pipes Etc. If So Required For The Complete Working Of The Stp And Got It Approved By The Engineer In Charge. B ) .Only Plateform For Stp Plant Shall Be In The Scope Of The Owners. The Sewerage Treatment Contractor Shall Co-Ordinate, Supervise And Get All The Inserts Installed. All Supply Of Ms / Insert Plates Shall Be In The Scope Of The Sewerage Treatment Contractor.Supply, Installation, Testing & Commissioning Of 2 Nos Mild Steel 5Mm Frp Coatingperforated Corrugated Bar Screen With Vertical Grating Made By 3 Mm Thick Stainless Steel Plate, Spacing Of Plates 20 Mm C / C Both Sides With Suitable Lifting Arrangement ( Size 750 Mm Wide X 600 Mm High Approx ) C ) .Supply, Installation, Testing & Commissioning Of 2 Nos Mild Steel 5Mm Frp Coatingperforated Corrugated Bar Screen With Vertical Grating Made By 3 Mm Thick Stainless Steel Plate, Spacing Of Plates 20 Mm C / C Both Sides With Suitable Lifting Arrangement ( Size 750 Mm Wide X 600 Mm High Approx ) D ) .Supply, Installation, Testing And Commissioning Of The Following Tanks And Chambers In Hdpe / Pvc As Per Approved Drawings And Directions Of Engineer Incharge. The Cost Shall Include All The Required Mswalking Platform, Handrail, Staircase, Manhole Cover Etc. All Above Quoted With Minimum 10Mm M.S Tanks With 5Mm Frp Coating Protectiona ) .Mbbr Tank Of Capacity 25000 Litersb ) .Tube Settler Tank Of M Sc ) .Sludge Holding Tank Of Capacity 5000 Litresd ) .Chlorine Contact Tank Of Capacity 10000 Litrese ) .Treated Water Tank Of Capacity 15000 Litres Quoted With Minimum 10Mm M.S Tanks And All Above Item As Per Design Requirments ( No Extra Payment Shall Be Paid ) 90 Supply, Installation, Testing & Commissioning Of Horizontal Type Pumps, Having Cast Iron Body, C.I. Impeller & Shaft Connected To Tefc Motor For 415 Volts, 3 Phase, 50 Cycles A.C. Power Supply Withmechanical / Gland Seal. Protection Complete In All Respects Including Suction And Delivery Headers With Upvc Pipe Of Required Dia, Isolation Valves, Nrv & Pumps Shall Have Following Duty: A ) .Raw Sewage Transfer Pump ( Pumps To Be Suitable To Handle Solid Handling Capacity Upto 40 Mm Size ) Set Of Two Pumps ( 1 Working + 1 Standby ) Capacity - 2.5 Lps ( Required- 2.5M3 / Hr ) Head - 10-12 Mtr.H.P.-2 Hp Approx. 91 B ) .Submersible Sewage Lifting Pumpset Of Two Pumps ( 1 Working + 1 Standby ) Capacity - 1.5 Lpshead - 10-12 Mtr.H.P.-2 Hp Approx. ( Solid Handling Capacity Upto 40 Mm Size ) 92 Supply, Installation, Testing & Commissioning Of Electromagnetic Type Flow Meter At The Outlet Point Of Raw Sewage Transfer Pump Of 50 Mm Size Suitable For 0 - 15 Klh Flow. 93 Supply, Installation, Testing & Commissioning Of Twin Type Rotary Air Blower With Acoustic Encloser, Driven Through “V” Belt Or Directly Coupled Through Flexible Coupling To A Tefc Motor Of Suitable Hp Suitable For 415 ± 10% Volts, 3 Phase, 50 Cycles A / C Supply. Capable Of Delivering 70 Cum / Hr Of Free Air At 0.5 Kg / Cm2. 94 Supply, Installation, Testing & Commissioning Of Air Piping Shall Comprise Of Pipes Droppers / Laterals With Ms ( Epoxy Coated ) Header Complete With All Fittings Such As Tees, Crosses, Plugs, Sockets, Elbows, Reducers, Supports & Clamps, Puddle Flanges Etc Including Cutting Holes In Wall, Makes Chases In Wall And Making Good The Same. Contractor To Submit Detailed P&I Indicating Their Proposal. 95 Supply, Installation, Testing & Commissioning Of Fine Air Diffusers Capable Of Delivering 10-12 Cum / Hr In Mbbr Tank For Providing Areation. 96 Supply, Installation, Testing & Commissioning Of Coarse Air Diffusers Capable Of Delivering 3-6 Cum / Hr In Equalization Tank And Sludge Holding Tank For Providing Areation. 97 Supply, Installation, Testing And Commissioning Of High Surface Area @ 400 M2 / M3 At Least Ring Type Media To Be Used For Bacterial Growth Installed In Moving Bed Bio Reactor Tanks. 98 Supply, Installation, Testing And Commissioning Of Pvc Tube Deck Settling Media To Be Installed In Tube Settling Tank. The Media To Be Supported On Msep Frame With Baffle Plate & Overflow Launder. 99 Supply, Installation, Testing And Commissioning Of Single Stage Horizontal Centrifugal Self Priming Pump With With C.I Body, Bronze Impeller, Shaft Of Stainless Steel, Shaft Sleeve Of Chrome Steel And Delivery Casing In C.I With Mechanical Seal, Connected To A Tefc Inductionmotor Suitable For 415+ / - 10%Volts, 3Phase50 Cycles A.C. Supply With 150Mm Dia Pressure Gauge With Gunmetal Isolation Cock, Vibration Eliminating Pads Under Foundation, Sequence Running Controller, Dry Running Protection, 80X40 Mm I Section Base Plate Bolted To Cement Concrete Foundations Complete Includingisolation Valves, Nrv & Vibration Eliminators On Both Suction & Delivery Side Of Pumps .Vendor To Submit Performance Curves And Technical Catalogue Of The Proposed Model For Review And Information. A ) .Sludge Feed / Transfer Pump ( Pumps To Be Suitable To Handle Solid Handling Capacity Upto 8-10 Mm Size ) B ) .Set Of Two Pumps ( 1 Working + 1 Standby ) C ) . Capacity- 1.5 Lpsd ) .Head - 10.0 Mtr. E ) .H.P.-1.5 Hp Approx. 100 Supply, Installation, Testing And Commissioning Of Horizontal Centrifugal Pumping Set With Cast Iron Body, Bronze Impeller, Shaft Of Ss And C.I. Base & Head With Mechanical Seal, Connected To A Tefc Inductionmotor Suitable For 415 + / - 10%Volts, 3 Phase 50 Cycles A.C Supply With 150Mm Dia Pressure Gauge With Gunmetal Isolation Cock, Vibration Eliminating Pads Under Foundation, Dry Running Protection, 80X40 Mm I Section Base Plate Bolted To Cement Concrete Foundations Complete Including Isolation Valves, Vibration Eliminators On Both Suction & Delivery Side Of Pumps And Nrv On Delivery Side Of Pumps Vendor To Submit Performance Curves And Technical Catalogue Of The Proposed Model For Review And Information.A ) .Filter Feed Pumpsb.Set Of Two Pumps ( 1 Working + 1 Standby ) C ) .Capacity- 3.0 Lps ( Suggested And Quoted For 5000Lph ) D ) .Head - 30.0 Mtr.E ) .H.P.-3.0 Hp Approx. 101 Supply, Installation, Testing & Commissioning Of Vertical Self Supporting Filtration Unit Fabricated From Ms Sheet As Per Is: 2825 ( Minimum Thickness Of Shell 8 Mm And Dished Ends 10 Mm ) Pressure Gauges, Sample Cock, Gi Class C Face Piping, Ci Butterfly Valves And All Accessories, With Initial Charge Of Filter Media Including Anthracite, Painting Inside With Epoxy Paint And Outside With Two Coat Of Red Oxide Primer And Two Or More Coat Of Synthetic Enamel Paint, Testingand Commissioning Complete.A ) .Mulitgrade Pressure Sand Filtercapacity - 5000 Lph Filtration Rate -14000Lph / Sqm Filter Dia Approx. - 800 Mm Working Pressure: 3.0 Kg / Sqcm. Test Pressure : 4. 5 Kg / Sq Cm 102 B ) .Activated Carbon Filter Filtration Rate -14000Lph / Sqm Filter Dia Approx. - 800 Mm Working Pressure: 3.0 Kg / Sqcm.Test Pressure : 4. 5 Kg / Sq Cm 103 Supply, Installation, Testing & Commissioning Of Metering Pump Type Chemical Doser With 100 Lits. Pvc / Hdpe Solution Tank, Injection Fitting Assembly, Suction And Delivery Hose Upto The Point Of Injection, Capacity 0-6 Lph, Complete In All Respects. 104 Supply, Installation, Testing & Commissioning Of Ultravoilet Dis-Infection Unit. The Unit Shall Have Over 99.9 % Bacterial Reduction From Inlet To Outlet. The Dis-Infection Chamber Shall Be Constructed Of Ss 316L On All Welted Parts. The Uv Lamp Shall Be Of Low Pressure Mercury Vapour Type With Hard Glass Enclosure, The Sockets Shall Be Water Tight & Vibration Resistant. The Lamp Life Shall Be Rated For 6000 Hours. The Unit Shall Be Complete With Temperature Safety Control, Lamp Out Alert Circuit & Uv Radiometer With 4 – 20 Ma Output. The Uv Unit Shall Have With Reactor, Cabinet Housing, Cabinet Cooling, Treatment Chamber, Electrical Panel, Temperature Safety Control, Lampout Alert, Uv Radiometer Along With Uv Monitoring System And Uv Monitoring Readout Panel.The Uv Dosage Should Be > 60, 000 Uw – Sec / Sq.Cm. The Lamps Should Be Selected Based Upon The Flow Requirement Of Respective Unit.Flow Rate : 5 Cum / Hr 105 Supply, Installation, Testing & Commissioning Of All Pipings ( As Described Below ) And Isolation Control Valves Including All Necessary Fittings And Clamps, Supports, Hangers As Required I / C Cutting And Making Good The Walls Wherever Required Complete In All Respects For Making The System Complete.A ) .Gi : Submerged Air Piping ( We Suggest Upvc. Gi Is Never Used For Submerged Piping ) Ms Epoxy: Air Piping & Pumped Effluent Riser ( Non-Submerged ) Upvc : Interconnecting Pipe Line After Delivery Header Of Pump / Filtercontrollers With Low Voltage Relays, Stainless Steel Probes And Pvc Shroud, Control Cabling As Required Length. ( No Of Probes As Required For Function Of Each Controller ) . 106 B ) .Filter Feed Pumps To Cut Off Duty Pump On Low Water Level In The Chlorine Contact Tank And High Water Level In The Treated Water Tank And To Start Pump At Low Water Level In The Treated Water Tank. 107 Supply, Installation, Testing & Commissioning Of Filter Press Of Plate Size 18X 18X 12 Nos. Plate With Screw Feed Pumps Of 5 M3 / Hr @ 40 M Head Capacity ( 1 Working + 1 Standby ) Complete In All Respects. 108 Providing Installing Testing And Commissioning Of Ultra Filteration ( Uf ) System For Further Polishing Treated Effluent And Capable Of Producing 5, 000 Litre / Hour. The System Shall Be Complete With Uf Feed Pumps ( 1W+1S ) , Backwash Pumps ( 1W+1S ) , Cartridge Filters ( Fabricated| ) , Uf Membranes Flushing / Cleaning System Complete Instrumentation For Automation And Monitoring Rotameters Pressure Gauges Interconnecting Pipeword Electrical Cabling And Switchgear, All Complete Electrical Installation For Stp 109 Design, Fabrication, Assembling, Wiring, Supply, Installation, Testing And Commissioning Of Motor Control Centre Fabricated Out Of 14 Gauge Crca Sheet Steel. Cable Gland Plates Shall Be Provided On Top As Well As At The Bottom Of The Panels. Panels Shall Be Treated With All Anticorrosive Process Before Painting As Per Specifications With 2 Coats Of Red Oxide Primer And Final Approved Shade Of Powder Coated Paint. 2 Nos. Earthing Terminals Shall Be Provided For 3 Phase, 4 Wire, 50 Hz Supply System. Lifting Hooks Shall Also Be Provided In Case Of Large Panels. Approval Shall Be Taken For Each Panel Before Fabrication. Quoted Rates Shall Be Inclusive Of Cables ( In Accordance To Specification ) With Earthing From Panel To Each Motor / Equipment.Motor Control Centreincoming: A ) .200 Amps Tpn Mccb With The Following Accessories:B ) .0-500 Volts 96 X 96 Mm Square Electronic Voltmeter With Selector Switch Shall Be Protected By 2 Amps Tp Mcb. 1 Set.C ) .0-100 Volts 96 X 96 Mm Square Electronic Voltmeter With Selector Switch And Shall Be 100. / 5 Amps 10 Va Cl: Cts. 1 Set. D ) .Pharse Indicating Lamps Shall Be Protected By 2 Amp Sp Mcb 3 Sets. Bus Bar:A ) .200 Amps Tpn ( 15 Ka ) Copper Bus Bar With Heat Shrinkable Insulation Sleeves.Outgoing; A ) .10 Nos. Of 25 Amp Capacity Tpn Mcb With 10 Nos. Dol Starters And Out Going Feeders To All The Pumps Etc. ( Including Standbies ) . Each Compartment Shall Contain Auto / Manual Selector Switch Andindicating Lamp With Mcb’S For ‘On / Off / Trip’ Status Of Motor B ) .Spare 25 Amps TpnmcbS2 Nos. C ) .Spare 32 Amps TpnmcbS2 Nos. D ) .Necessary Cable Alleys, Internal / Cabling, Wiring, Cabling From Mcc To Various Pumps / Equipment And Interlocking, Earthing For All Equipment Shall Also Included Mcc For All Stp Equipments / Pumps As Described Above.Notes : A ) .All Mccbs / Mcbs Shall Be Of 15 Ka Breaking Capacity And Suitable For Motor Duty Application.B ) .All Motor Starters Shall Be Provided With Automatic Level Controller. C ) .Dol Starters Shall Be Used For Motors Below 10Hp And Star-Delta Starters For Other Motors . Motor Control Centre Incoming 200 Amps Tpn Mccb With The Following Accessories:0-500 Volts 96 X 96 Mm Square Electronic Voltmeter With Selector Switch Shall Be Protected By 2 Amps Tp Mcb. 1 Set.0-100 Volts 96 X 96 Mm Square Electronic Voltmeter With Selector Switch And Shall Be 100. / 5 Amps 10 Va Cl: Cts. 1 Set.Phase Indicating Lamps Shall Be Protected By 2 Amp Sp Mcb 3 Sets.Bus Bar 200 Amps Tpn ( 15 Ka ) Copper Bus Bar With Heat Shrinkable Insulation Sleeves.Outgoing10 Nos. Of 25 Amp Capacity Tpn Mcb With 10 Nos. Dol Starters And Out Going Feeders To All The Pumps Etc. ( Including Standbies ) . Each Compartment Shall Contain Auto / Manual Selector Switch Andindicating Lamp With Mcb’S For‘On / Off / Trip’ Status Of Motorspare 25 Amps TpnmcbS2 Nos. Spare 32 Amps TpnmcbS2 Nos. Necessary Cable Alleys, Internal / Cabling, Wiring, Cabling From Mcc To Various Pumps / Equipment And Interlocking, Earthing For All Equipment Shall Also Included Notes : All Mccbs / Mcbs Shall Be Of 15 Ka Breaking Capacity And Suitable For Motor Duty Application.All Motor Starters Shall Be Provided With Automatic Level Controller.Dol Starters Shall Be Used For Motors Below 10Hp And Star-Delta Starters For Other Motors .Provision Shall Be Made For Providing Potential Free Contacts To All Pumps Starters.Mcc For All Stp Equipments / Pumps As Described Above. Sub Total Of Part A 110 Part B ( O & M Cost ) ( For 5 Years ( 60 Months ) From Final Handing Over Of All Works. ) ( Optional ) Trained Operator To Operate The Stp Round The Clockincluding Operator And Regular Visit Of Supervisor. Perannum Including All Charges Like Amc , Monthly Charges Of Water Analysis And All Consumables Etc Included. Sub Total Of Part B ( Rate Only ) 111 Part:C Providing & Laying Upvc Pressure Pipes Of 6 Kg / Sq.Cm Pressure Rating Class 3 ( Is : 4985-2000 ) Including Fittings, Tees, Bends, Clamps, Coupling And Adaptors Supports, And Jointing With Solvent Joint, Testing And Necessary Earth Work In Excavation, Backfilling, Disposal Of Surplus Earth With A Lead Up To 100M Complete, Compaction And Consolidation Including Sand Bedding All Around Upvc Pipe & Fittings And Thrust Blocks At Bends As Per Standard Design.200Od 112 Constructing Rccchamber Of Holding Capacity 10 M3 With Grade Of M25 Including Cost Of Centering , Shuttering & Pcc Below Foundation In 1: 5:10 & 75 Mm Thick And Inside Chamber Of 75Mm Thick As Per Standard Design Including Inside Plastering With Cement Mortar 1:6 ( 1 Cement :6 Coarse Sand ) 12 Mm Thick Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design .Rate To Include Cost Of Reinforcement , Excavation And Filling Of Earth. Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. The Contractor Has To Detect Different Unilities Like Sewer Line , Water Supply Line , Electrical Cable , Telephone Cable , Gas Pipe Line Etc. Using Utility Detecting Machine Before Start Of Excavation And Shall Start Excavation Only After Getting Permission Of Engineer In Charge.All Kinds Of Soil.Depth Upto 1.5M From Existing Ground Level 113 B ) Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 114 Providing & Laying Cement Concrete - All Works Upto Plinth Level : C ) 1:4:8 ( 1 Cement : 4 Coarse Sand ( Zone-Iii ) : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 115 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. ( Note :- Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess / Less Cement Used As Per Design Mix Is Payable / Recoverable Separately ) . A ) Uptoplinth 116 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.B ) Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More 117 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : C ) Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete 118 D ) Suspended Floors, Roofs, Landings, Balconies And Access Platform 119 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 10 In Foundation And Plinth In: A ) Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) For 230Mm Thick Brick Work 120 B ) 12 Mm Cement Plaster Of Mix :1:4 ( 1 Cement: 4 Fine Sand ) 121 C ) 15 Mm Cement Plaster On Rough Side Of Single Orbrick Wall Of Mix:1:4 ( 1 Cement: 4 Fine Sand ) 122 D ) 6 Mm Cement Plaster Of Mix :1:3 ( 1 Cement : 3 Fine Sand ) 123 Designing, Preparation Of Shop Drawings, Supplying, Erection, Testing, Commissioning Of All Mechanical, Electrical And Other Components Including Getting Approval Of Successful Test Results From Approved / Authorized Agency From Pollution & Environmental Authorities, Operating & Maintaining Upto Successful Commissioning, For 5 M3 / Day Capacity Sewage Treatment Plant Sewage Treatment Plant Near Workshop Area ( Complete System To Be Compact Type, Skid-Mounted / Cabinet Enclosed, As Per Detailed Shop Drawings To Be Approved ) Suprime / Sintex Maketotal C / F To Summary 124 R.O Water Treatmentplant: Supply, Installation, Testing And Commissioning Of R.O. Plant Capacity Of 750 Lph ( Complete System To Be Compact Type, Skid-Mounted / Cabinet Enclosed, As Per Detailed Shop Drawings To Be Approved ) For The Following Parameters And Consisting Of ( But Not Limited To ) The Following Main Components:- ( I ) Inlet Quantity : As Per Detailing ( Ii ) Output Quantity : 750 Lph ( Iii ) Inlet Tds : 600 Ppm ( Iv ) Outlet Tds : 75 Ppm ( V ) Inlet Hardness : 350 Ppm ) ( Vi ) Outlet Hardness : 50 Ppm ) Raw Water Pumps Of Horizontal, Centrifugal Type Suitable For A Flow Rate Of 1500 Lph At 25M Head. The Pump Construction Shall Be Of Ss-304 & Impeller Shall Be Also Ss-304. The Motor Shall Be Tefc Suitable For A Supply Of 415V / 3-Phase / 50Hz Supply. The Pump Shall Be Supplied Complete With Base Channel Coupling Foundations, Bolts, Pressure Gauge At Inlet And Outlet Of Each Pump. -- 2 Nos. ( 1W+1S ) Special Antiscalant Dosing System Consisting Of One Hdpe Tank Of 100 Litre Capacity With A Positive Displacement Diaphragm Dosing Pump Having Variable Flowrate Of 0-6 Lph. The Motor Shall Be Suitable For Operation At 240V / Single Phase / 50Hz Supply. The Pump Shall Be Supplied Complete With Necessary Polypropylene Piping, Valves, Strainers & Injection Fittings. -- 1 Set Micron Cartridge Filter Suitable For A Flowrate Of 1500 Lph To Achieve Particle Filtration Of Less Than 5 Microns. The Unit Shall Be Supplied Complete With Inlet And Outlet Branches Removal Cap For Replacement Of Element, Inlet And Outlet Pressure Indicators. ( One For The Pressure Treatment & Other For Cip System ) Moc: Polypropylene -- 2 Sets R.O High Pressure Feed Pumps Of Vertical, Multistage Centrifugal Type Suitable For A Flowrate Of2000 Lph At 14 Kg / Sq.Cm. The Pump Construction Shall Be Of Ss-316-L & Impeller Shall Be Also Ss-316-L. The Motor Shall Be Of Tefc Suitable For A Supply Of 415V / 3 Phase / 50 Hz Supply. The Pump Shall Be Supplied Complete With Base Channel Coupling Foundation, Bolt, Pressure Gauge At Inlet And Outlet Of Each Pump.- 2 Nos.R.O. Modules Made Out Of Spiral Wound Thin Film Composite Suitable To Withstand Pressure Of 20Kg / Sq.Cm. Suitable Bspt / Npt Connections Shall Be Used For Connecting Feed & Reject Ends. The Modules Shall Be Supplied Complete With All Necessary Instrumentation, Valves For Sampling, Drain, Reject & Permeate, Epoxy-Coated Structural Steel Bases And Supports, As Per Following System Capacity Requirements: ( I ) Total Net Treated Water Output Of System = 750 Lph ( Ii ) System Recovery= 50 - 60 % ( Iii ) Filtration Area Per Membrane = 85 Sq.Ft. ( Iv ) Number Of Membranes = The Total Number Of Membranes Required Shall Beas Per Requirements, Supported By Calculations From The Vendor. Centralised Plc Control Panelalong With Touch-Screen Digitial Display Board Along With All Digital Sensors For Tds & Flow, Made Out Of Crca Sheet Min. 2Mm Thick Having Main Contactors For All Pumps ( Listed Above ) Including Spp, 3 Phase Thermal Overload Relay. The Control Panel For Monitoring And Control Of P.O. System Shall Include All Required Signal Lamps, Hrc Fuses, Annunciation Box With Hooter. All Control And Power Cabling Along With Double Earthing Between The Panel Shall Be Included In The Scope Of Supply Of The Contractor. An Emergency Stop Push Button Shall Be Provided In The Panel. The Mcc Panel Shall Have The Following Interlocks:- I ) High Pressure Pump Unit Trip In Case Of Low Suction Pressure. Ii ) High Pressure Pump Unit Trip In Case Of High Discharge Pressure.Iii ) Special Anti-Scalant Dosing Pump Trips In Case High Pressure Pump Trips And Vice Versa.Iv ) High Pressure Pump Trip In Case Of High Conductivity In Permeate.V ) Shc Dosing Pump Trips Incase High Pressure Pump Trips And Vice Versa. Vi ) Orp With Dump Valve.-- 1 Seti ) First Fill Of All Chemicals And Lubricants To Commission And Operate The Plants. --1Lotj ) All Interconnecting Piping Work With Valves:- I ) Low Pressure Side Till R.O. Feed Water Pump. Piping Shall Be Of Extra Strong Pvc And All Valves Shall Be Of Extra Strong Pvc And All Valves Shall Be Pvc Ball Valves. -- 1 Lotii ) High Pressure Side Piping From The R.O. High Pressure Pumps To The Reject Stream Control Valves Shall Be Of Ss - 304 Using All Ss Fittings Ball Valves Of Suitable Pressure Rating Shall Be Used Till 25 Mm Size, Above 25 Mm, Flanged Globe / Wafer Butterfly Valves In Ss Construction Shall Be Used. Rejects Pressure Control Valves Shall Be Globe Valve And Feed Flow Control Valve Shall Be Of Ss-304. -- Lotiii ) Before Procurement Of Material Contractor Should Be Get Technical Approval From Consultants. ( All For Above From A To J Complete ) 125 R.O Water Storage Complete 316 Stainless Steel Treated Water Storage Tank ( Double Wall ) Of Capacity 2000 Litres Including All Inlet / Outlet Connections, Accessories, Valves, Double Seal Manhole Covers, Insulation Etc.The Stainless Steel Tank Must Be Ozone Resistant And To Be Used As Ozone Contact Tank. Fabrication To Be Done As Per Approved Shop Drawing. ( Make :Nector ) 126 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflowpipes But Without Fittings And The Base Support For Tank.. 127 Activated Carbon Filter ( Automatic Type For Online Installation Before The Micron Filters ) Suitable For A Flow Rate Of 1500 Lph. The Material Of Construction Shall Be Composite Frp. The Unit Shall Be Supplied Complete With Multi-Port Valves, Inlet And Outlet Branches Removal Caps Of Replacement Of Elements Inlet And Outlet Pressure Indicators. -- 1 Set 128 Hydropneumatic System For R.O Supply Providing Fixing And Commissioning Suitable Complete Composite Hydropneumatic System Consisting Ofhorizontal / Vertical Multistage Centrifugal Pump Having Stainless Steel Impellers, Stainlesssteel Shaft, Stainless Housing And Single Mechanical Seal And Pressurised Tankof Required Specifications And Of Non-Toxic Rubber Diaphragm, Complete With All Accessories Including Pressure Switch, Pressure Gauge And Electrical Panel With All Necessary Protection And Operational Devices I.E Alternate Pumping Operation And Shut Off During Dry Running Conditions Etc., And Inclusive Of Ss 316 Suction And Delivery Manifold Of Required Size With Non-Return Valve And Ball Valveand Withsuitableelectrical Motor To Be Operated On 210 / 220 Or 400 / 440 Volt 50 Cycle Suitable For Following Duty And With Total No. Of Pumps - 2 Nos. ( 1 Working+ 1 Standby ) Complete With The Approval Of Engineer-In-Charge.- Before Procurement Of Material Contractor Should Be Get Technical Approval From Consultants.A ) Discharge:150 Lpmb ) Head:45 M C ) App. Capacity Of Thevessel ( Frp ) : As Requiredtotal C / O To Summary 129 Hot Waterboilers And Other Related Accessories Electrical Hot Water Generators System With Solar Back Up.Hot Water Mixing Storage Tank ( 2 Sets For Club And Benquet Hall ) Supply, Installation, Testing And Commissioningof Solarwater Heating System Capable Of Generating 7500Lpd Of Hot Water Per Day At 60 Oc Along Withinsulated Horizontalhot Watermixing Tank Capacityand Design Code I.S: 2825 Fabricatedof 6 Mm Thick S.S. 304Plateand 10 Mmthickdishedend And Nozzles Complete With Inlet, Cold Waterinlet / Outlet Chain Connection Withflanges, Manhole With Bolted Cover With 72 Kw Electrical Back Up Along With Control Panels . Tankshall Beinsulated With 50 Mm Thickresin Bondedfibre Glass ( Density 24 Kg / Cum ) And Covered With500gpolythene Sheetand 24 Gauge Aluminumsheet Cladding Giving Proper Overlaps And Sealing The Joints With Suitable Adhesive Compound, Including The Following Additional Accessories / Specifications:Working Pressure : 7.5 Kg / Cm²i ) Safety Valveii ) Dial Type Thermometer Iii ) Thermowell For Thermostat Elements Cold Water Inlet Valve 80 Mm Dia Check Valve In Cold Water Inlet 80 Mm Dia.Hot Water Inlet / Outletsecondary Side 50 Mm Dia Valve Plate Type Heat Exchanger Compleate With Pumps Required Specification.Hot Water Outlet Connection Valve To System 100Mm Diaplate Type Heat Exchanger Compleate With Pumps Required Specification.Hot Water Outlet Connection Valve To System 100Mm Dia Hot Water Return Inlet 65 Mm Dia Drain Valve 50 Mm Diaair Release Valve 25Mm Diahot Water Return Nrv 65 Mm Dia Solar Pre Heating Working Inlet 80 Mm Dia Butterfly Valvesolar Pre Heating Working Inlet 80 Mm Dia Nrv Electrical Control Panel As Per Approved Apecification Temp. Controller 130 Hot Water Returnpumps For Domestic Waterprovidingand Fixing Horizontal Multistage Centrifugal Pumping Set With Stainless Steel Ss-304 Stage Casing And Ss-304 Impellers With Stainless Steel Ss-304 Shaft As Per Iec Standards Andss - 304 Suction & Discharge Casing, Connected To Tefc Ventilated Induction Motor Of 2 Pole, 2900 Rpm, Suitable For 400 / 440 V Phase, 50 Hz A.C. Supply With Pressure Gauge And With Gunmetal Isolation Cocks, Vibrationelimination Pads Etc. Complete With Base And Frame, Nuts & Bolts And Necessary Rcc Foundations As Per Requirement As Per Instructions And Pump Shall Follow Following Dutynos : 2 ( 1 W +1 S ) Capacity: App.100 Lpm Head :15 M 131 Solar Hot Water Re-Curculation Pumps : Providingand Fixing Horizontal Multistage Centrifugal Pumping Set With Stainless Steel Ss-304 Stage Casing And Ss-304 Impellers With Stainless Steel Ss-304 Shaft As Per Iec Standards Andss - 304 Suction & Discharge Casing, Connected To Tefc Ventilated Induction Motor Of 2 Pole, 2900 Rpm, Suitable For 400 / 440 V Phase, 50 Hz A.C. Supply With Pressure Gauge And With Gunmetal Isolation Cocks, Vibrationelimination Pads Etc. Complete With Base And Frame, Nuts & Bolts And Necessary Rcc Foundations As Per Requirement As Per Instructions And Pump Shall Follow Following Duty Nos : 2 ( 1 W +1 S ) Capacity: App100 Lpm Head :55 M 132 Electrical Panel Providing Motor Control Centres Fabricated From 16 Gauges M.S. Sheet With Powder Coated Finish. The Control Panels Should Be Comparable With H.P. Of The Motor As Specified.For Hot Water , Steam Genration Systemshot Water Recuculation Pumps, Hot Water Supply Pumps Condensate Pumps Etc.A ) One Incoming Main Isolation Mccb Of Required Rating.B ) Fully Taped Aluminum Bus Bar Ofrequiredcapacity In A Separate Bus Bar Chamber.C ) Isolation Switch Units With Mccbof Required Rating, For Each Unit.D ) Fully Automatic Dol Starter With Pushbutton And On / Off Indicating Lights For Each Unit, For Following Requirements:I ) Hot Water Boilers 2 Nos. Of Required 74 Kw Eachii ) Hot Water Re-Circulation Pumps 2 Nos. ( 1 Working+ 1 Stand By ) Of Required Hp Iii ) Solar Hot Water Recirculation Pumps 2 Nos. ( 1 Working+ 1 Stand By ) Of Required Hpiv ) One No. Spare Feeder Required 5 Hprotary Switches For Auto / Manual On / Off Operations For Each Unit.Rotary Duty Selector Switches.Panel Type Voltmeter 150Mm With Rotary Selector Switch For Reading Voltage Between Phases.Neon Phases Indicating Lights On The Incoming Mains. Single Phasepreventorfor Each Motor. Ct Operated Relayall Internal Wiring Colour Coded From Incoming Mains To Various Switchgear, Starter, Meter, Indicating Lamp And Bus Bar. All The Cable Entry To The Panel Shall Be From The Top. ( All For Above From Item ( A ) To ( L ) Complete Set ) . ( The Shop Drawing To Be Preparedand Approved Before Fabrication ) Total C / O To Summary 133 Swimming Pool Filteration System Recirculation Pumps Main Pool + Jacuzziarea : 550 M2 X 1.2 M Balancing Tank : 60 M3total Pool Volume : 660 M3 + 60 M3 = 720 M3filtration Flow Rate : 180M3 / Hr Filtration Plant With Pumpsupply, Instalation, Testing & Commissioning Of Bobbin Wound Side Mount Sand Filter Manufactured With Fiber Glass And Polyester Resin, Uv Resistance Surface, Fitted With Collector Arms And Diffuser Made From Unplasticised Pvc And Polypropylenewith Lid In Polyester Resin And Fibre Glass, Manual Air Purgeand 4 Pvc Flanged Connection For Inlet And Outlet, Pressure Gauge, Water Drain / Empty Drain For Filter Etc.Complete In All Respects. Including Corse & Fine Silica Sand Media For Filterapx. 7200Kgcapacity 60000 Ltrs / Hrdesign @30000 Ltrs / Sqm / Hr.Diameter1600 Mm Working Pressure4.0 Kg / Cm² 134 Valve Battery Valve Battery Manifold Made In Pvc With Flanges For Connecting To Filters Consists Of Set Of 5 - Buttterfly Valves For Carrying Out Filtration, Back-Washing, Rinsing And Shut Down Of The Filters. Size : 4 Inchsupply, Instalation, Testing & Commissioning Of Self Primingpumps With Ci Body, In Built Ci Strainer Basket, Impeller In Ci / Bronge, Motor Shaft In Stainless Steel Aisi-420, Mechanical Seal In Sic - Sic / Carbon - Ceramic, Motor Housing In Aluminium, Withmotor -2850Rpm, F Class Insulation, Protection Ip-55. ( 3W+1S ) 135 Supply, Instalation, Testing & Commissioning Of Self Primingpumps With Ci Body, In Built Ci Strainer Basket, Impeller In Ci / Bronge, Motor Shaft In Stainless Steel Aisi-420, Mechanical Seal In Sic - Sic / Carbon - Ceramic, Motor Housing In Aluminium, Withmotor -2850Rpm, F Class Insulation, Protection Ip-55. ( 3W+1S ) Capacity60000 Ltrs / Hrhead 16 Mtrhp 7.5, Three Phase 136 Swimming Pool U.V. Sterlizersupply, Instalation, Testing & Commissioning Of U.V. Sterlizer With S.S. Housing Outside, U.V. Lamp, Glass Tube And All Other Accessories With Cleaning Arrangement, Supports, Inlet Outlet Connection With Bypass Arrangement Including S.S. Cabinet With Glass Door Of Suitable Size To House The U.V. Sterlizer Complete With Required Accessories. Flow Rate = 60000 Ltr / Hrworking Pressure = 4.0 Kg / Sqm Uv Lamp Wattage = 400 W 137 Dosing Pumpsupply, Instalation, Testing & Commissioning Of Chemical Dosing Pumpfor Chlorination With 200 Ltrs. Sintex Tank And Accessories Capacity0-20 Litres / Hr.Head35 M 138 Stainless Steel Drain Supply, Instalation, Testing & Commissioning Ofstainless Steel Drain Grating Plate Made Out Of 316 Quality S S Plates With Suitable Supporting Frame And Of Following Sizes And Having Holes Of Required Size For Drainout Chamber.Size 400X400 Mm 139 Inlet Nozzlesupply, Instalation, Testing & Commissioning Of Flow Adjastable Abs Inlet Nozzles Uv Treated With S.S. Screws To Fit In The 2 Pvc Pipes 140 Suction Inlets ( Vacuum Points ) Supply, Instalation, Testing & Commissioning Of Abs White Plastic Suction Port / Vacuum Nozzle With 2 Inch Solvent Cement Connection 141 Supply, Instalation, Testing & Commissioning Of Stainless Laddersteel 316 Ladders, Width: 500Mm Wide, Handrails Dia 43Mm Stainless Steel, Non-Slip Stepsprovided With Anchoring Socket.A ) 3 Step Standard Ladder With Anti-Skid Steps 142 B ) 4 Step Standard Ladder With Anti-Skid Steps 143 Underwater Led Lights Supply, Instalation, Testing & Commissioning Of 12Volt 54 W Under Water Stainless Steel 316L Led Light Fixture ( Ip 68 ) Including All Required Assessories & Making Connection As Required. With 2 Mtr Power Cord. 144 Power Supply Supply, Instalation, Testing & Commissioning Oftransformer For Led Lights 12V Dc, 30 Amp 145 Deck Box Supply, Instalation, Testing & Commissioning Of Abs White Plastic Deck. 146 Cleaning Accessories A ) Extensivetelescopic Handle, ( 2.4 - 4.8 ) Metres Long &1.1Mm Thick For Cleaning Attachment In Anodized Almunium. 147 B ) Transparent Blue Polyethylene Hose 40Mm ( 1-1 / 2 ) Dia 30 M Length. 148 C ) Surface Net Skimmer Made In Polypropylne 149 D ) Deep Bag Net Skimmer Made In Polypropylne 150 E ) Curved Polybristle Wall Brush 450 Mm 151 F ) Test Kit For Ph And Chlorine. 152 G ) Hi-Grade Stainless Steel Algae Brush - 10 153 H ) Vacuum Head With Ss-Body, 1 1 / 2 Connection Size 900 Mm Long 154 I ) Deluxe Large Vacuum Head With 4 Wheels, Alu-Body, Plastic Handle, 1 1 / 2 Connection Size 445X130 Mm 155 J ) Polybristle Wall Brush 10 ( 26Cm ) 156 K ) Chemical Tcca 90 ( 50 Kg. ) & Alum ( 30 Kg. ) 157 L ) Nylon Rope 158 Upvc Pipesproviding And Fixing Upvc Pressure Pipes ( 10Kg / Cm2 ) With Plain Socket Suitable For Solvent Cement Jointing Conforming To Is:4985 / 2000 & Fittings Conforming To Is 7834 / 87.Cut To Required Lengths Including All Necessary Fittings And Specials Such As Bends, Tees, Unions, Reducers, Flanges And Plugs Etc. The Pipes & Fittings Shall Be Tested To A Pressure Of 10 Kg / Sq.Cm.A ) 32 Mm Dia 159 B ) 50 Mm Dia 160 C ) 63 Mm Dia 161 D ) 75 Mm Dia 162 E ) 90 Mm Dia 163 F ) 110 Mm Dia 164 G ) 160 Mm Dia 165 H ) 200 Mm Dia 166 I ) 250 Mm Dia 167 Ball Valveproviding And Fixing Pvc Lever Operated Ball Valve Of Full Flow With Setting And Gland Of Superior Quality Having Minimum Working Pressure Of 10 Kg / Cm2 With Union, Flanges Where As Required.A ) 32Mm Dia 168 40Mm Dia ( Rate Only ) 169 50Mm Dia ( Rate Only ) 170 63Mm Dia 171 75Mm Dia ( Rate Only ) 172 90Mm Dia ( Rate Only ) 173 Butterfly Valve Providing And Fixing Upvc Butterfly Valves. Tested To A Pressure Not Less Than10 Kg / Sq.Cm. Including Rubber Gasket, Flanges, Nuts, Bolts, Washers Complete As Required. A ) 90 Mm Dia 174 B ) 110 Mm Dia 175 C ) 160 Mm Dia 176 D ) 200 Mm Dia 177 E ) 250 Mm Dia 178 Non Return Valveproviding And Fixing Pvc Ball Type Or Spring Loaded Non Return Valve With Setting And Gland Of Superior Quality Having Minimum Working Pressure Of 10 Kg / Cm2 With Union, Flanges Where As Required.A ) 50Mm Dia 179 B ) 63Mm Dia 180 C ) 75Mm Dia 181 Providing And Fixing Of Upvc Wafer Check Valve Non-Return Valves ( Pn 10 ) Complete With Matching Flanges, Rubber Insertion, Nuts, Bolts And Washer Etc. Of Following Sizes.A ) 75Mm Dia 182 B ) 90 Mm Dia 183 C ) 110 Mm Dia 184 D ) 160 Mm Dia 185 E ) 200 Mm Dia 186 F ) 250 Mm Dia 187 Puddles Sleevesupply & Fixing Of Following Sizes Of Heavy Duty Pvc Puddle Flanges ( Upvc Pipe ( 10 Kg / Cm2 ) Fixed With Flanges, Length 400 To 600 Mm Length ) On The Wall Of Plantroom, Balancing Tank And The Water Body Walls & Slab ( As Required ) . To Be Laid In Between The Steel Reinforcement Before Rcc. Does Not Include Any Civil Work. A ) 32 Mm Dia 188 C ) 50 Mm Dia 189 D ) 63 Mm Dia 190 E ) 75 Mm Dia 191 F ) 90 Mm Dia 192 G ) 110 Mm Dia 193 H ) 160 Mm Dia 194 I ) 200 Mm Dia 195 J ) 250 Mm Dia 196 Supply, Laying, Testing And Commissioning Of Ss 304 Grade 300Mm Dia Pump Suction Header With 2 Nos 200Mm Dia Flange Connection For Balancing Tank To Pump Suction Header, 1 No. 90 Mm Dia Flange Connection For Vacuum Pipe & 1 No. 200 Mm Dia Flange Connection For Pool Drain Pipe & 4No. 200Mm Dia & 2 No. 160Mm Diaflange Connection For Pump Suction. 197 Supply, Laying, Testing And Commissioning Of Ss 304 Grade 200Mm Dia Pump Delivery Header With 1 Nos 200Mm Dia Flange Connection For Filter Inlet Header, 1 No. 160 Mm Dia Flange Connection For Drain Pipe & 4 No. 160Mm Dia Flange Connection For Pump Delivery. 198 Supply, Laying, Testing And Commissioning Of Following Size Pvc Insulated Sheathed Copperconductor 1100 V Grade Unarmoured Cable With Required Size Of Sleeves Complete As Required. A ) 4 X 16 Sq.Mm 199 C ) 4 X 6 Sq.Mm ( Rate Only ) 200 D ) 4 X 4 Sq.Mm ( Rate Only ) 201 E ) 4 X 2.5 Sq.Mm 202 F ) 4 X 1.5 Sq.Mm ( Rate Only ) 203 G ) 3 X 6 Sq.Mm ( Rate Only ) 204 H ) 3 X 4 Sq.Mm 205 I ) 3 X 2.5 Sq.Mm ( Rate Only ) 206 J ) 3 X 1.5 Sq.Mm ( Rate Only ) 207 K ) 2 X 6 Sq.Mm 208 L ) 2 X 4 Sq.Mm ( Rate Only ) 209 M ) 2 X 2.5 Sq.Mm 210 N ) 2 X 1.5 Sq.Mm 211 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In 6 Gauge Gi Wire Recess For Loop Earthing As Required. 212 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. A ) 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 213 B ) 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 214 Providing & Fixing M.S. Structural Work Fabricated From Standard Section E.G. M.S Rounds, Angles, Channels, Plates Including Cutting To Size, Drilling, Welding Fixing And Welding To Insert Plates In Rcc Structural Members As Directed By Engineer-In-Charge Including Cutting And Making Good The Walls, Ceilings And Floors ( For Pipe Supports, Clamps Etc. ) 215 Electrical Control Panel Supply, Installation, Testing And Commissioning Of Following Swimming Pool Panel 415 V, 1 / 3 Phase And 50 Hz Power Distribution System. Thepanel Shall Be Free Standing Floor Mounting Sheet Metal Enclosed Dust And Vermin Proof Confirming To Ip-54, Compartmentalized Design Fabricated Out Of 16 Swg Sheet Steel, Painting Earthing Numbering, Danger Plate As Per Specifications And Drawings. Flush Front With Aluminium Busbars, Seperate Earth Bus Bars To Be Provided Throughout The Length Of The Panel The Incoming And Outgoing Feeder Breakers, Fuses, Indicating Lamps Etc Shall Be Accomadated In A Modular Multilier Arrangement. The Panel Shall Be Powder Coated Through 9 Tank Process. Adequate Size Cable Alley Shall Be Provided Forcable Termination.The Outgoing Feeders Inside Shall Be Connected Through Bus Bars / Flexible Cable Links. Incoming: One ( 1 ) No. 200A Tp 25 Ka Mccb With Thermomagnetic Digital Flush Mounted 0-200A Ammeter With 3 Way And Off Selection Switch With 3 Nos. 200 / 5 Amp Ct. 1 Set ( 3 Nos. ) Of Phase Indication Lamps 200A 25 Ka Tpn Aluminium Bus Bar. It Shall Be Insulated With Heat Shrinkable Sleeves And Shall Be Color Coded. Outgoing: Recirculation Pumpsix ( 6 ) Nos. Star Delta Starter Complete With Separate Single Phasing Protection Feature. On / Off Indicating Lamps, Relay, Contractors, Start / Stop Push Button, Auto / Manual Selector Switch, Sufficient Nos Of Potential Free Spare Contacts, Etc For Suitable Hp3 Nos. 6Amp Dp Mcb Of Suitable Rating With Correct Thermal Range Suitable For Chemical Dosing3 Nos. Toggle Switch For Doser3 Nos. 6Amp Dp Mcb Of Suitable Rating With Correct Thermal Range Suitable For Uv 3 Nos. Toggle Switch For Uv 1 Nos.16Amp Dp Mcb Of Suitable Rating With Correct Thermal Range Suitable For Underwater Lights 1 Nos. Toggle Switch For Led Pool Lightstotal C / O To Summary 216 Entry Water Bodypressure Sand Filtersupply, Instalation, Testing & Commissioning Of Bobbin Wound Top Mount Sand Filter Manufactured With Fiber Glass And Polyester Resin, Uv Resistance Surface, Non Corrosive Material, Complete With 6-Way 2 Multiport Valve With Filter Connection / Inter-Connecting Piping, Pressure Gauge, Water Drain / Empty Drain For Filter.Including Corse & Fine Sand Media For Filter As Per Approved Calculation Capacity15000 Ltrs / Hr Design @35000Ltrs / Sqm / Hr. Diameter750 Mm 217 Filter Re-Circulation Pumpsupply, Instalation, Testing & Commissioning Of Self Primingpumps With Plastic Body, In Built Strainer Basket, Impeller In Ppo, Motor Shaft In Stainless Steel Aisi-420, Mechanical Seal In Sic / Graphite And Steatite, Motor Housing In Aluminium, Withmotor -2800Rpm, F Class Insulation, Protection Ip-55. ( 1W+1S ) Capacity15000 Ltrs / Hr Head 12 Mtrhp 2.0, Three Phase 218 Fountain Re-Circulation Pump Single Stage High Speed Horizontal Centrifugal Monobloc With Volute Type Delivery Casing Pool Recirculation Submersible Pump, Delivery Casing & Motor Body In Ci, Motorshafts In Carbon Steel, Impeller In Ci Withmotor Hp7.5, Three Phase 219 Single Stage High Speed Horizontal Centrifugal Monobloc With Volute Type Delivery Casing Pool Recirculation Submersible Pump, Delivery Casing & Motor Body In Ci, Motorshafts In Carbon Steel, Impeller In Ci Withmotor Hp2.0, Single Phase 220 Swimming Pool U.V. Sterlizer Supply, Instalation, Testing & Commissioning Of U.V. Sterlizer With S.S. Housing Outside, U.V. Lamp, Glass Tube And All Other Accessories With Cleaning Arrangement, Supports, Inlet Outlet Connection With Bypass Arrangement Including S.S. Cabinet With Glass Door Of Suitable Size To House The U.V. Sterlizer Complete With Required Accessories. Flow Rate = 20000 Ltr / Hrworking Pressure = 2.5 Kg / Sqmuv Lamp Wattage = 40 W 221 Chlorine Tablet Feedersupply, Instalation, Testing & Commissioning Of Chlorine Tablet Feeder With Accessories Capacity = 4.5 Kg 222 Stainless Steel Drain Supply, Instalation, Testing & Commissioning Ofstainless Steel Drain Grating Plate Made Out Of 316 Quality S S Plates With Suitable Supporting Frame And Of Following Sizes And Having Holes Of Required Size For Drainout Chamber.Size 200X200 Mm 223 Fountain Nozzlesupply, Instalation, Testing & Commissioning Of Brass Crome Plated Gyserjet Nozzle With 1 Connection With Required Accessories. 224 Suction Inlets ( Vacuum Points ) Supply, Instalation, Testing & Commissioning Of Abs White Plastic Suction Port / Vacuum Nozzle With 2 Inch Solvent Cement Connection 225 Supply Of12volt 12W Under Water Stainless Steel 316 Ring Underwater Led Lightstype Led Warm White Light ( Ip 68 ) Including All Required Assessories & Making Connection As Required. With 2 Mtr Power Cord.For Fountain Nozzle 226 Power Supplysupply, Instalation, Testing & Commissioning Oftransformer For Led Lights 12V Dc, 30 Amp 227 Supply, Instalation, Testing & Commissioning Ofrgb Programmer For Led Lights. 228 Deck Boxsupply, Instalation, Testing & Commissioning Of Abs White Plastic Deck. 229 Upvc Pipes Providing And Fixing Upvc Pressure Pipes ( 10Kg / Cm2 ) With Plain Socket Suitable For Solvent Cement Jointing Conforming To Is:4985 / 2000 & Fittings Conforming To Is 7834 / 87.Cut To Required Lengths Including All Necessary Fittings And Specials Such As Bends, Tees, Unions, Reducers, Flanges And Plugs Etc. The Pipes & Fittings Shall Be Tested To A Pressure Of 10 Kg / Sq.Cm.A ) 32 Mm Dia 230 50 Mm Dia 231 63 Mm Dia 232 75 Mm Dia 233 90 Mm Dia 234 110 Mm Dia 235 160 Mm Dia ( Rate Only ) 236 200 Mm Dia ( Rate Only ) 237 Ball Valve Providing And Fixing Pvc Lever Operated Ball Valve Of Full Flow With Setting And Gland Of Superior Quality Having Minimum Ball Working Pressure Of 10 Kg / Cm2 With Union, Flanges Where As Required.A ) 32Mm Dia ( Rate Only ) 238 40Mm Dia ( Rate Only ) 239 50Mm Dia 240 63Mm Dia 241 75Mm Dia 242 90Mm Dia ( Rate Only ) 243 Butterfly Valveproviding And Fixing Upvc Butterfly Valves. Tested To A Pressure Not Less Than10 Kg / Sq.Cm. Including Rubber Gasket, Flanges, Nuts, Bolts, Washers Complete As Required.A ) 90 Mm Dia ( Rate Only ) 244 110Mm Dia 245 160 Mm Dia ( Rate Only ) 246 200 Mm Dia ( Rate Only ) 247 Non Return Valve Providing And Fixing Pvc Ball Type Or Spring Loaded Non Return Valve With Setting And Gland Of Superior Quality Having Minimum Working Pressure Of 10 Kg / Cm2 With Union, Flanges Where As Required. 50Mm Dia ( Rate Only ) 248 63Mm Dia 249 75Mm Dia 250 Providing And Fixing Of Upvc Wafer Check Valve Non-Return Valves ( Pn 10 ) Complete With Matching Flanges, Rubber Insertion, Nuts, Bolts And Washer Etc. Of Following Sizes. A ) 75Mm Dia ( Rate Only ) 251 90 Mm Dia 252 110 Mm Dia 253 Puddles Sleeve Supply & Fixing Of Following Sizes Of Heavy Duty Pvc Puddle Flanges ( Upvc Pipe ( 10 Kg / Cm2 ) Fixed With Flanges, Length 400 To 600 Mm Length ) On The Wall Of Plantroom, Balancing Tank And The Water Body Walls & Slab ( As Required ) . To Be Laid In Between The Steel Reinforcement Before Rcc. Does Not Include Any Civil Work. A ) 32 Mm Dia ( Rate Only ) 254 50Mm Dia ( Rate Only ) 255 Supply, Laying, Testing And Commissioning Of Ss 304 Grade 200Mm Dia Pump Delivery Header With 1 Nos 200Mm Dia Flange Connection For Filter Inlet Header, 1 No. 160 Mm Dia Flange Connection For Drain Pipe & 4 No. 160Mm Dia Flange Connection For Pump Delivery. 256 Supply, Laying, Testing And Commissioning Of Following Size Pvc Insulated Sheathed Copperconductor 1100 V Grade Unarmoured Cable With Required Size Of Sleeves Complete As Required. A ) 4 X 16 Sq.Mm 257 4 X 2.5 Sq.Mm 258 3 X 4 Sq.Mm 259 2 X 6 Sq.Mm 260 2 X 4 Sq.Mm ( Rate Only ) 261 2 X 1.5 Sq.Mm 262 Providing & Fixing M.S. Structural Work Fabricated From Standard Section E.G. M.S Rounds, Angles, Channels, Plates Including Cutting To Size, Drilling, Welding Fixing And Welding To Insert Plates In Rcc Structural Members As Directed By Engineer-In-Charge Including Cutting And Making Good The Walls, Ceilings And Floors ( For Pipe Supports, Clamps Etc. ) 263 Electrical Control Panelsupply, Installation, Testing And Commissioning Of 415 V, 1 / 3 Phase And 50 Hz Motor. The Switchboard Cubical Indoor Type Made Of 16 Swg Crca Sheet Painted With Powder Coated Paint Of Siemens Grey Shade. The Cubical Is Wall Mounted With Dust & Vermin Proof Construction With Inter Connection. It Comprise With The Following:A ) One Incoming Mains Of 63 Amps. Mccb – Tp, Schneider B ) One No. 0 – 600 V Digital Voltmeter, Mecon Make 96 Sq.Mm With Voltage Selector Switch. Make. C ) Three Phase Led Type Indicating Lights For Incoming Mains. D ) One No. Ct Operated 0 – 60 / 5 A Digital Ammeter, Mecon E ) Two No. Star Delta Starter Schneider Make With On / Off Push Button And On / Off Indication Light F ) Two No. Star Delta Starter Schneider Make With On / Off Push Button And On / Off Indication Light G ) Four No. Auto / Manual Selector Switches, Salzer Make H ) One No. Mcb Dp 6 Amps. For U / V System, Schneider Make. I ) One No. Toggle Switch For U / V System, Hsd Make. J ) One No. Mcb Sp 6 Amps. For Smps Dc Power Supply For Led Light, Schneider Make. K ) One No. Toggle Switch For Led Pool Lights, Hsd Make.Total C / O To Summary 264 Pond Aerationsupply, Instalation, Testing & Commissioning Of Surface Aerating Fountain With Pump, Float, Spray / Fountain Nozzle, Conrtol, Lights And Cable, Pump Capacity 1-3 Hp The Aerator Shall Be A Floating 265 Supply, Instalation, Testing & Commissioning Of Surface Aerating Fountain With Pump, Float, Spray / Fountain Nozzle, Conrtol, Lights And Cable, Pump Capacity 5-7.5 Hp The Aerator Shall Be A Floating 266 Supply, Instalation, Testing & Commissioning Of Surface Aerating Fountain With Pump, Float, Spray / Fountain Nozzle, Conrtol, Lights And Cable, Pump Capacity 10 Hp The Aerator Shall Be A Floating 267 Supply, Instalation, Testing & Commissioning Of Surface Aerating Fountain With Pump, Float, Spray / Fountain Nozzle, Conrtol, Lights Ss Frame And Cable, Pump Capacity 10 Hp The Aerator Shall Be A Floating 268 Miscellaneous Item ( Hanging Wire Etc ) Total C / O To Summary 269 Golf Course Water Bodies / Ponds Stpwater Supply:Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : A ) 25 To 40 Mm Nominal Bore 270 B ) 50 To 80 Mm Nominal Bore 271 Fixing Water Meter And Stop Cock In G.I. Pipe Line Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( Cost Of Water Meter And Stop Cock To Be Paid Separately ) . 272 Brass Fittings Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) :A ) 25 Mm Nominal Bore 273 B ) 20 Mm Nominal Bore 274 C ) 32 Mm Nominal Bore. 275 D ) 40 Mm Nominal Bore 276 E ) 50 Mm Nominal Bore 277 F ) 65 Mm Nominal Bore 278 G ) 80 Mm Nominal Bore 279 Providing And Fixing Ball Valve ( Brass ) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : A ) 15 Mm Nominal Bore 280 B ) 20 Mm Nominal Bore 281 C ) 25 Mm Nominal Bore 282 Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality ( Screwed End ) :A ) 25 Mm Nominal Bore Horizontal 283 Vertical 284 B ) 32 Mm Nominal Borehorizontal 285 Vertical 286 C ) 40 Mm Nominal Bore Horizontal 287 Vertical 288 D ) 50 Mm Nominal Bore Horizontal 289 Vertical 290 E ) 65 Mm Nominal Bore Horizontal 291 Vertical 292 F ) 80 Mm Nominal Borehorizontal 293 Vertical 294 Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main :Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main :15 Mm Nominal Bore 295 Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main :Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main :15 Mm Nominal Bore 296 25 Mm Nominal Bore 297 C.I. / Ductile Iron Pipes & Specialsproviding And Laying S&S C.I. Standard Specials Such As Tees, Bends, Collars, Tapers, Caps Etc. ( Heavy Class ) : A ) Up To 300 Mm Dia 298 B ) Over 300 Mm Dia 299 Providing And Laying Flanged C.I. Standard Specials Such As Tees, Bends, Collars, Tapers, Caps Etc., Suitable For Flanged Jointing As Per Is : 1538 :A ) Up To 300 Mm Dia 300 B ) Over 300 Mm Dia 301 Providing And Laying S&S Centrifugally Cast ( Spun ) Iron Pipes ( Class La ) Conforming To Is - 1536 :A ) 100 Mm Dia Pipe 302 B ) 125 Mm Dia Pipe 303 C ) 150 Mm Dia Pipe 304 D ) 200 Mm Dia Pipe 305 E ) 250 Mm Dia Pipe 306 Providing Lead Caulked Joints To Spun Iron Or C.I. Pipes And Specials, Including Testing Of Joints But Excluding The Cost Of Pig Lead : A ) 100 Mm Diameter Pipe 307 B ) 125 Mm Diameter Pipe 308 C ) 150 Mm Diameter Pipe 309 D ) 200 Mm Diameter Pipe 310 E ) 250 Mm Diameter Pipe 311 Providing Flanged Joints To Double Flanged C.I. / D.I. Pipes And Specials, Including Testing Of Joints : A ) 100 Mm Diameter Pipe 312 B ) 125 Mm Diameter Pipe 313 C ) 150 Mm Diameter Pipe 314 D ) 200 Mm Diameter Pipe 315 E ) 250 Mm Diameter Pipe 316 C.I. Sluice Valves / Fire Hydrants & Fixturesproviding And Fixing C.I. Sluice Valves ( With Cap ) Complete With Bolts, Nuts, Rubber Insertions Etc. ( The Tail Pieces If Required Will Be Paid Separately ) :A ) 100 Mm Diameterclass I 317 Class Ii 318 B ) 150 Mm Diameter Class I 319 Class Ii 320 200 Mm Diameter Class I 321 Class Ii 322 250 Mm Diameterclass I 323 Class Ii 324 300 Mm Diameter Class I 325 Class Ii 326 Constructing Masonry Chamber 60X60x75 Cm Inside, In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Sluice Valve, With C.I. Surface Box 100Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 327 Constructing Masonry Chamber 90X90x100 Cm Inside, In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement 3 Coarse Sand ) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 ( Rate Only ) 328 Constructing Masonry Chamber 120X120x100 Cm Inside, In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 329 Constructing Masonry Chamber 60X60x75 Cm, Inside In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Fire Hydrants, With C.I. Surface Box 350X350 Mm Top And 165 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand:10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 ( Rate Only ) 330 Air Valve & Water Meter ( Bulk Type ) : Providing And Fixing C.I. Double Acting Air Valve Of Approved Quality With Bolts, Nuts, Rubber Insertions Etc. Complete ( The Tail Pieces, Tapers Etc If Required Will Be Paid Separately ) :50 Mm Dia 331 80 Mm Dia 332 100 Mm Dia 333 Providing And Fixing Enclosed Type Water Meter ( Bulk Type ) Conforming To Is : 2373 And Tested By Municipal Board Complete With Bolts, Nuts, Rubber Insertions Etc. ( The Tail Pieces If Required Will Be Paid Separately ) :150 Mm Dia Nominal Bore 334 200 Mm Dia Nominal Bore 335 Providing And Fixing C.I. Dirt Box Strainer For Bulk Type Water Meter With Nuts, Bolts, Rubber Insertions Etc. Complete Conforming To Is : 2373 :80 Mm Dia 336 100 Mm Dia 337 150 Mm Dia 338 200 Mm Dia 339 Providingandlayings&Sc.I.Standardspecialssuitablefor Mechanical Jointing As Per Is : 13382 :Up To 300 Mm Dia 340 Filter Feedpump :Providingand Fixing Vertical, Inline Multistage Centrifugalpumpingset ( Complete Manufactured Skid-Mounted Arrangement With Manifold And Accessories ) Withstainlesssteelss-304Stage Casingandss-304Impellerswith Stainless Steel Shaft As Per Iec Standards And Gjl250 Cast Iron Suction & Discharge Casing, Connected To Tefc Ventilated Induction Motor Of 2 Pole, 2900 Rpm, Suitablefor 400 / 440 Volts, 3 Phase, 50 Hz A.C. Supply With Pressure Gauge And With Gunmetal Isolationcocks, Vibrationelimination Pads Etc. Complete With Base And Frame, Nuts And Boltsandnecessary Rcc Foundations As Per Requirementasper Instructionsandpumpshallhave Following Duty: A ) .No. Ofpumps: 3 ( 2 Working + 1 Standby ) B ) .Capacity :2000 Lpmc ) .Head :35 Md ) .Capacity :2000 Lpm E ) .Hp ( Motors ) : 75 Hp 341 Pressure Filter ( Domestic Water ) :Providing And Fixing Vertical Dual Media Pressure Filter ( Comprising Of Minimum 300Mm Bed Depth Of Anthracite And Support Media And Minimum Height On Straight 2500Mm ) Fabricated From High Performance M.S Plate Of Minimum 10Mm Thick For Shell & 12Mm Thickfor Dished Ends ( Quality Of Steel As Per Is:2062 Grade B, Thickness As Per Asme Section 8 ) Internally Treated With Coal-Tar Epoxy, Complete With Air Scouring, Collection System Complete With Initial Charge Of Media, M.S Facepiping, Valves, Accessories, External Painting With 2 Coats Of Red Oxide Primer And Enamel Paint, Testing And Commissioning Complete. ( Tested To 5.0 Kg / M2 ) A ) .Discharge : App.120000 Lph ( Each ) B ) .Filtration Rate : 24, 500 Lit. / M2 / H C ) .Each Suggested Dia App.:As Per Manifacture Detail 342 Water Softener:Providing And Fixing ‘Cation’ Ion Exchange Water Softener Fabricated From Minimum 10Mm Thick M.S. Plateon Min. Shell And 12Mm Thick M.S. Plate On Dished Ends ( Quality Of Steel As Per Is:2062 Grade B, Thickness As Per Asme Section 8 ) Complete With Initial Charge Of Filter Media And Ion Exchange Resins, Face Piping Accessories, Diaphragm Valves Of Approved Specifications, Hdpe Brine Tank Of Min. 500 Liters, Piping Testing And Commissioning Complete With Resins Of Approved Quality And Make And Regeneration Assembly Complete With Valves, Ejector, Brine Suction Valves And Piping. ( Bidder Must Indicate Type And Quantity Of Resin Used And Quantity Of Salt Required Per Regeneration ) . All Internal Parts Of The Softener Shall Be Rubber Lined As Per Approved Specifications.A ) .Minimum Expected Rate Of Flow:App.32, 000 Lph B ) .Total Soft Water To Be Produced Between Two Regenerations: App. 256 Cu.M C ) .Expected Raw Water Hardness : App. 450-500 Ppmd ) .Expected Treated Water Hardness: Less Than 5 Ppm ( Zero Commercial Hardness ) E ) .Max. Working Pressure: 4 Kg / Cm2 343 Cubical Panel Board - Plumbing : Supply, Installation, Testing And Commissioning Of Cubical Type Sectionalised Floor Standing Switch Board Of 31 Mva Fault Capacity At 415 V Complete With 3.5 Strip, 160 A Capacity Aluminium Bus - Bar Electrolytic Grade, Cable Alley, Switchgears Of Following Capacity & As Per Specifications.Incomer : 600 A Tp Mccb With Heavy Duty Solid Neutral Link With ( 0-100A ) Ammeter With 3 Ct And Selector Switch, ( 0 - 500 V ) Voltmeter With Selector Switch, Phase Indication Light Withprotection Fuse. - 01 Setoutgoings : I ) For 5 X 75 Hp Domestic Water Fixed Speed Hydroneumatic Pumps ( 1 Duty + 1 Stand By ) Ii ) For 2 X 5 Hp Sump Pump ( 1 Duty + 1 Stand By ) 150 A Tp Mcb With 40 A Dol Starter, Overload Relay, 96 Mm ( 0-40A ) Ammeter With Single Ct, Start / Stop Push Buttons, On / Off / Trip Indication Lights With Protection Fuse, Single Phase Preventer. - 01Set. 40A Tp Mcb With 25 A Dol Starter, Overload Relay, 96 Mm ( 0-25A ) Ammeter With Single Ct, Start / Stop Push Buttons, On / Off / Trip Indication Lights With Protection Fuse, Single Phase Preventer. - 01 Set.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
33.
Tourism #8811610 Technical Bid
Supply Of Various Electrical Spares For The Year 2020-21 At Rsgc Srinagar-1 Supply Of Non Return Valve, 80 Mm Nominal Dia ( Kirlosker / Ivc Make ) 2 Supply Of Sluice Valve, 80 Mm Nominal Dia. ( Kirlosker / Ivc Make ) 3 Supply Of Foot Valve, 125 Mm Nominal Dia. ( As Per Sample ) 4 Supply Of Grease 5 Supply Of Gland Packing 8 Mm 6 Supply Of Alum 7 Supply Of Chain Pulley, 2 Ton 8 Supply Of Butterfly Valve, Dn 100 ( As Per Sample ) ( Kirlosker / Ivc Make ) 9 Supply Of Rubber Gasket Sheet 10 Supply Of Ball Valve, 25 Mm 25 Mm Nominal Dia. 11 Supply Of Aluminium Ladder, 12 Ft, Wall Supporting Type 12 Replacing Of Filter Media ( Sand, Gravel, Etc ) 13 Supply Of Tool Kit Having Hammer, Spanner, Wrench, Pliers, Screwdriver, Adjustable Spanner ( Taparia / Reputed Make ) 14 Supply Of Rubber Gloves ( Reputed Make ) 15 Supply Of Flexible, Pvc Water Pipe. 16 Supply And Fixing Of 2 X 1.5 Sqmm Wire For Dozing Pump 17 Supply And Fixing Of 1 Inch Gi Pipe ( Including The Cost Of Unions, Elbows, Tees Etc ) For Dozing Pump 18 Providing, Hoisting And Fixing Of Ms Trash Guard 20 Sft Square With Angle Iron Frame ( 60 X 60 X 6 Mm ) Incl. Steel Mesh Fixed On All Sides Over Angle Iron Frame With The Arrangement Of Collar To Be Fixed With Suction Pipe . 19 Sitc Of Water Geyser, 50 Litres Capacity ( Racold / Reputed Make ) 20 Supply Of Single Phase Preventer 21 Supply Of Timer For Star Delta Starter 22 Supply Of Mnx A2 Block / Auxiliary Switch 23 Repair Of Line Shaft Of 20 Hp Pumping Unit 24 Complete Cleaning Of Incoming Drain From Silt, Trash Etc 25 Complete Desalting Of Sump Well Including Dewatering 26 Sitc Of Heat Shrinkable Cable Kit, 35 Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
34.
Defence #8724029 Technical Bid
Tender For Short Refit Work Package 50T Tug Sahas-1 Short Refit Work Package:- General Service. Scaffolding ( With Material ) To Be Arranged For Survey Purpose For A Total Number Of 80 Days. Quote For Services. 2 Fire Sentries With Necessary Fire Fighting Equipment, To Fight Fire Are To Be Provisioned. Quote For Services. 3 Cleaning Of All Tanks And Provide Gas Free Certificate. The Vendor Is To Be Provide All Consumables Required For Cleaning. Repair Plating, Structures And Fittings Of Water Ballast Tank And Fresh Water Tank As Per Survey Report. Damaged Area To Be Blasted Up To Bare Metal And Recoated As Per Existing Paint Scheme. Quote For Services. 4 Degutting & Regutting – Removal And Refiting Of Panels ( Approx 30 Sqm ) And Pipes. Quote For Both Services And Material. 5 Carry Out Non-Destructive Testing For Bollards, Fairleads And Hull Structure Including Stiffening Members In The Vicinity. ( A ) Survey To Be Done In Presence Of Nsry / Fab Survey Teams And Survey Reports To Be Provided. ( B ) Requirement To Undertake Renewal Of Structures, Based On Survey Report, To Be Included In Sow. Quote For Services And Material. 6 Testing Of Wt Compartment. All Tanks, Cofferdams And Sea Tubes Which Have Been Repaired By Build-Up / Renewal Or Have Been Subjected To Hot Work Through Welding Of Pad Piece / Foundation On Any Of Their Boundaries, Are To Be Air Pressure Tested. The Pressure Applied Should Never Exceed That Which Corresponds To A Pressure Of 0.2 Kh / Cm2 ( 02 Mtr Of Water Or 0.2 Bars Or 2 1 / 2 Ibf / In2 ) . Ballast Tank - Qty 03 , Fuel Tank – Qty 05, Fw Tank – Qty 02, Misc Tank - 04. Clearance Of Areas, Subject To Apt Will Be Accorded By Nsry / Fab Survey Team. Quote For Services . 7 Mast And Riggings. ( A ) Examine Mast Structure, Whip Aerial Platforms And The Surrounding Structure On Deck, Eye Plates, Load Carrying Members, For Signs Of Corrosion. Examine Bolted, Riveted And Intermittent Welded Structure Connections For Signs Of Fracture. Portable And Semi Portable Fittings To Be Removed For Closer Examination Of Structure Underneath. Defect To Be Rectified And Paint To Be Restored. All Marks Of Corrosion And Rust Are To Be Removed. Requirement Of Paint And Other Consumables To Be Catered For By The Vendor. Quote For Services And Material. 8 ( A ) Test All Standing & Running Riggings Fitted On Mast Structure Along With Associated Fittings. Renew All Wire Ropes And Associated Fittings As Necessary. ( B ) Carry Out Load Testing Of All Deck Eye Plates ( Qty 14 ) , Bottle Screws ( Qty 14 ) And Provide Load Test Certificate. Damaged Eye Plates And Bottle Screws Are To Be Renewed By The Vendor, Together With Relevant Load Test Certificates / Guarantee / Warrantee. Quote For Services. 9 Steel Renewal. Any Requirement To Include Transportation Of Steel And Preparation Of The Plates, Including Shaping And Positioning At Location Has To Be Catered For By The Vendor.Quote For Services. 10 Funnel. Examine, Clean And Restore Paint Of Eye Plates And Surroundings Structure, Funnel Structure ( Internal And External ) . Portable Or Semi-Portable Fittings That Obscure Structure Are To Be Removed And To Be Recoated Before The Fittings Are Replaced. Requirement To Ensure That Damaged Areas Requiring Steel Renewal Together With Paint Renewal Will Have To Be Undertaken By The Vendor. Quote For Services And Material. 11 Accommodation And Office. Repair / Renewal Of Wooden Furniture And Wooden Fittings Including Table, Chairs And Wooden Cupboards In Compartment And Accommodation Spaces. Quote For Services And Material. 12 Repair / Renewal Of Bunks, Mess Lockers And Their Securing Arrangements. Lockers And Securing Arrangements That Are Beyond Repairs, Are To Be Replaced With Suitable Alternatives. Quote For Services And Material. 13 Repair / Renewal Of Defective Deck Covering And Renewal Of Deck Plates Underneath As Per Survey Report Of Yard. Deck Coverings Being Renewed, Should Be Those That Have Been Approved By Navy. Quote For Services And Material. 14 Anchor, Chain Cable And Cable Locker. Lay Out All Cables, Survey Cable And Shackles, Break, Clean And Grease All Joining Shackles, Strip And Grease Slip In Cable Locker. Re-Arrange Cable Length To Ensure Equality Of Wear. Re-Mark Cable Length. Examine Hull Associated Fittings. Examine All Spare Chain Cable And Fittings, Clean And Coat With Boiled Linseed Oil. Dismantle Anchor. Clean And Grease Trunion Pin And Housing. Grease To Be Used:- Lg-280 Patt.No. 0474 / 910-0502. Hydrojet Lasting Of The Anchor Chain Cable To Be Carried Out. The Machined Surfaces Of The Joints Of Lugless Joining Shackles Are To Be Examined For Corrosion And All Such Shackles Are To Be Stripped, Greased And Re-Assembled. The Anchor, Chain And Cable Locker To Be Restored To Factory Fit Functionality. Quote For Services And Material. 15 Machinery Spaces. Clean All Bilges Using Approved Chemical Method. Clean Out All Limber Holes And Drain Holes. Examine Structures Not Covered By Lagging, Paying Particular Attention To Position Where Water Is Likely To Accumulate, Junctions Of Longitudinal With Side Platings And Machinery Bearers With Bottom Plating, Horizontal Surfaces Such As Tank Tops, Horizontal Stiffeners And Structure Obscured By Cable Plating. Portable Fittings That Obscure Structure Are To Be Removed For Examination Of Structure Behind. Carry Out Surface Preparation In Accordance With No 53 / 16 And Recoat The Damage Paint. Disposal Of Sludge ( Approx 50 Tons ) To Be Catered For By The Vendor. Consumables For Cleaning Also To Be Catered For By Vendor. Paint Scheme Restoration In All Areas As Per Existing Navy Standards. Quote For Services And Material. 16 Check The Condition Of The Vibration Mounts. Clean And Apply Necol Lacquer. Spm Readings Of Equipment Will Need To Be Certified By Nsry / Engg / Ele Teams. Vibration Damping If Not Adequate, Will Need To Be Replaced By The Vendor After Grouping Of Mounts. Certification I.R.O The Same May Be Provided. Quote For Services And Material. 17 Renew Damaged / Perished Lagging At Various Places Using Pin Method. Renew Paint Scheme Of Affected Areas Before Renewal Of Lagging. All Consumables Are To Be Catered For By The Vendor. Quote For Services And Material. 18 Capstan ( Oem - Geeta Engg ) . All Structural And Functional Defects Pertaining To Motor And Capstan Assembly To Be Rectified By The Vendor By Repairs / Renewal. Requisite Fluids To Be Positioned For Lubrication. Motor Spm Values And Power Ratings For Safe Operation To Be Proved During Trials. Offer For Trials To Ss Post Completion. 19 Anchor Windlass ( Oem - Geeta Engg ) . All Structural And Functional Defects Pertaining To Motor And Capstan Assembly To Be Rectified By The Vendor By Repairs / Renewal. Requisite Fluids To Be Positioned For Lubrication. Motor Spm Values And Power Ratings For Safe Operation. Offer For Trials To Ss Post Completion. Quote For Services And Material / Spares. 20 Renewal Of Mushroom Head With Spindle And Valves. Renewal To Also Include Safety Nets / Fasteners As Per Requirement / Joints And Gaskets. Quote For Services And Material. 21 Sewage Treatment Plant ( Oem – M / S Eva Coy N40ce ) . ( A ) Functioning Of Level Switches Of V-1 Tank. Operate All The Valves Which Have Not Been Changed From A Set Position To Prevent Jamming. Carryout De-Sludging Of V-2 Tank By Back-Flushing Line. Clean The Seawater ‘Y’ Type Strainer At The Inlet To ‘Bookcell’. Check Macerator Pump Oil Level By Removing The Pipe Plug Located On Top Of The Pump Casing. Oil To Be Renewed. Vendor To Cater For Disposal Of 5 Ton Sludge Associated With Stp System. Overhauling Of System And Auxiliaries To Be Undertaken. Qc Coverage For Overhauling To Be Provided By Nsry / Qc Team. Ber Valves / Pipes / Joints And Fittings To Be Renewed. All Fluid Replenishment To Be Undertaken As Required. ( B ) Clean Air Supply Filter / Regulator Element In Solvent By Removing The Screws That Secure The Air Chamber To The Filter Body. Drain, Inspect & Clean The ‘Bookcell’. Remove Large Deposits Of Hard Material With Diluted Hydrochloric Acid. Post Completion Of Routines, Operate System And Inspect For Leaks And Proper Cell Amperage. ( C ) Inspect The Tightness Of Belt And Check Leakage From Gland Of Discharge Pump. Repack The Gland ( If Required ) . Quote For Services And Material / Spares. 22 Macerator Pump. Carry Out The Following :- ( A ) Check To Ensure There Are No Leakages From The Main Seals. Renew Drive End Bearing And Seals If Required. ( B ) Check And Ensure That The Impeller Rotates Freely With No Vibration. ( C ) Inspect And Tighten Nuts And Bolts As Necessary. ( D ) Check Overload Units Operating Correctly. ( E ) Check All Valves For Correct Operation. ( F ) Remove Drain Plugs Provided At Each End Of The Bracket Of The Electric Motor And Allow Any Accumulated Moisture To Drain Away And Replace Plugs. Note. Replacement Of The Pump Assembly To Be Undertaken By The Vendor, If The Discharge Rate Does Not Meet Oem Designed Standards. Quote For Services And Material / Spares. 23 Clean And Lubricate All Plug Cock Valves. Lubricate Valves In Fully Opened Or Fully Closed Position Only. Quote For Services And Material. 24 ( A ) Undertake Effluent Test From Nabl Accredited Lab And Check Compliance To Marpol Norms. ( B ) Carry Out In-Situ Calibration Of Fixed H2s Sensor. Certificate Of Calibration To Be Obtained From The Oem. Date Of Calibration And Next Due Date Should Be Clearly Indicated On The Certificate. ( C ) Sewage Pollution Prevention Certificate Valid For Duration Of Five Years From A State Authorised Accredited Agencies As Specified In Mepc 115 ( 51 ) And 227 ( 64 ) For The Ship Adopted On 01 Apr 04 As Per Regulation 5 Of Revised Annex Iv Of Marpol 73 / 78 ( Ncd 3930, Issue 3, Sep 16 Is Relevant ) . Quote For Services. 25 Towing Hook With Quick Release Mechanism ( Oem - M / S Nautiluis Eng & Construction Company ) . Carry Out Load Testing Of Towing Hook And Undertake Repairs. Job Involves Serviceability Of Release Line And Repairs. Replacement Of The Towing Hook With Quick Release Mechanism To Be Undertaken If Existing Unit Exceeds Service Life / Not Functioning As Per Design. Quote For Services And Material / Spares. 26 Grease Filters Inside Exhaust Trunking In Galleys To Be Cleaned And Preserved. Renew If Defective. Quote For Services And Material. 27 Doors - Water Tight And Non-Wt Doors. Check Clips, Hinges For Looseness And Wedge Pieces For Signs Of Wear. Examine Leather Washers, Toridal Sealing Rings And Rubber Sealing. Renew Worn Out Parts And Carry Out Chalk Test Of All Wt Doors. Quote For Services And Material. 28 Scuttles & Windows. Check Hinge Fitting, Toughened Glass And Glass Rails For Looseness And Sign Of Wear / Damage. Renew Worn Out Parts As Necessary. Windows – Qty 32, Scuttles – Qty 18. Quote For Services And Material. 29 Hatch And Manholes. Survey Hatch And Manholes Covers. Remove And Clean Hatch And Tumbler Hinges & Pins. Apply Grease. Deteriorated Hatches And Manhole Covers To Be Fabricated. Securing Fasteners Wherever Damaged To Be Renewed With Stainless Steel Fasteners As Per Recommendations Of Survey Team. Carry Out Chalk Test Of All Wt Hatches And Renew Worn Out Parts As Necessary. Quote For Services And Material. 30 Ladders. Repair The Ladders With Associated Footsteps. Structural Defects In The Ladder Assembly Other Than Steps Also To Be Catered.Quote For Services And Material. 31 Single Arm Boat Davit ( Oem - Hemant Engg ) . Overhauling Of Boat Davit Along With Motor Assembly. Offer For Trials To Ss Post Completion. Structural And Functional Defects Of The Single Arm Boat Davit To Be Rectified By Repairs / Renewal Of Components. Quote For Services And Material. 32 Survey Wire Rope, Spare Gear And Other Associated Lifting Gears. Renew As Necessary. Renewal Of Wire Ropes To Be Undertaken As Per Existing Naval Guidelines. Quote For Services And Material. 33 Carry Out Load Testing With Davit Fully Rigged Up. After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Defects Etc. Flaws Must Be Examined And Repairs To Be Undertaken, Followed By Retesting. Quote For Services And Material. 34 Water Accumulation Observed On Both Side Of Foxle. Scupper System To Be Re-Positioned For Clearance Of Water Accumulation. Painting In Areas Affected By Hot-Work / Steel Renewal To Be Restored By Vendor. Quote For Services And Material. 35 02 Bullwark Doors Damaged. Hinges Corroded. To Be Renewed. Mat – Ms. Quote For Services And Material. 36 Bullwark Damaged / Deformed At Various Location. To Be Repaired / Renewed. Mat – Ms. Quote For Services And Material. 37 ( A ) Rubber Fenders On Both Side Of Tug Found Damaged / Perished. Fenders To Be Renewed. Length- 50 Mtr. ( B ) Securing Fasteners For Fenders Found Perished / Corroded. To Be Manufactured As Per Sample And Fitted Back. Note. Deformation Of Base Structure / Strengthening Members On To Which The Fenders Are Secured Are To Be Surveyed And Deformations, If Any To Be Rectified By Hotwork / Steel Renewal. Quote For Services And Material. 38 Wooden Fenders Damaged In Port And Stbd Side. To Be Renewed. Job Involves Re-Fitment Of Fenders On Ship Side. Quote For Services And Material. 39 Natural Air Vent Of All Compartments Wire Mesh Broken, Air Vent Corroded, Flaps Rubber Beading Perished. Hinges And Butterfly Nuts Corroded. To Be Renewed. Quote For Services And Material. 40 Sounding Points Of Fresh Water Tank Threads Worn Out. To Be Repaired / Renewed. Quote For Services And Material. 41 Securing Bracket Of Fire Hose Box Corroded At Multiple Locations. To Be Renewed. Quote For Services And Material. 42 Lifebuoy With Self Igniting Light And Smoke Signal ( Mob Marker ) Quick Release Type To Be Renew On Bridge Deck. Quote For Service And Mat. 43 Fibre Sheet For Weather Deck Canopy Damaged. To Be Renewed. Quote For Services And Material. 44 Platform For Head Bollard Corroded / Damaged. To Be Repaired / Renewed. Quote For Services And Material. 45 Platform For Quarterdeck Bollard Corroded / Damaged. To Be Repaired / Renewed. Mat - Wood. Quote For Services And Material. 46 ( A ) Fisherman Plate Along With Securing Pin Corroded. To Be Manufactured As Per Existing Plate And Pin ( Qty 02 ) . ( B ) Bottle Screw For Anchor Chain Stopper Corroded. To Be Renewed ( Qty 02 ) . Quote For Services And Material. 47 Life Raft Stowing Brackets ( Qty 02 ) Along With Sliding Ladder Damaged / Corroded. To Be Repaired / Renewed And Operational. Job Involves Renewal Of Life Raft Securing Straps. Quote For Services And Material. 48 Serviceability Checks Of Life-Rafts ( Qty 02 ) And Hru ( Qty 02 ) By Nabl Accredited Agency. Webbing Of Life-Raft To Be Renewed, If Damaged Beyond Repair. Quote For Services And Material. 49 Covers ( Both Compressor Safety Mesh Cover And Control Panel Cover ) For 02 Ac Compressor Units On Upper Deck Damaged / Broken. To Be Manufactured. Mat - Al Plate. Quote For Services And Material. 50 15 Cm Ms Strip On Upper Deck Wt Doors Damaged / Corroded. To Be Manufactured And Welded In-Situ. Quote For Services And Material. 51 Internal Super Structure - Repair Works To Be Under Taken On Internal Hull Structure Including Bulkhead And Fittings As Per Survey Report. Painting To Be Under Taken Post Repairs. Quote For Services And Material. 52 Refrigerator On-Board Defective. To Be Repaired / Renewed. Quote For Services And Material. 53 01 Weather Deck Locker Damaged. To Be Repaired / Renewed. Quote For Services And Material. 54 Executive Chairs Fitted At Wheel House Observed To Be Damaged. To Be Renewed. Quote For Services And Material. 55 Engine Room Blower Wire Mesh And Securing Ms Strips Broken / Corroded. To Be Renewed. Quote For Services And Material. 56 Sunmica And Wooden Beading Of Dining Hall Table Broken / Damaged. To Be Repaired / Renewed. Quote For Services And Material. 57 Canvas Covers Of Following Deck Equipment Torn / Perished. To Be Renewed. Windlass, And Control Stand, Rescue Boat, Search Light ( Qty 02 ) , Magnetic Compass, Capstan And Capstan Control, Boat Davit Motor, Me And Da Exhaust And Intake. Quote For Services And Material. 58 Anchor Cleaning Sea Water Line Chocked / Damaged. To Be Repaired / Renewed. Quote For Services And Material. 59 Mob Stand ( Qty 04 ) And Bracket Damaged. To Be Renewed. Quote For Services And Material. 60 ( A ) Foundation Of Port And Stbd Search Light Found Deteriorated. Repair To Be Carried Out. ( B ) Rotating Mechanism Of Port And Stbd Search Lights To Be Renewed. Quote For Services And Material. 61 Hull Survey. Clean All Tank Tops, Bilges Of Machinery Spaces And Other Accessible Internal Surfaces Of Underwater Hull. Damaged Area To Be Blasted And Paint To Be Restored As Per Existing Paint Scheme. Quote For Services And Material. 62 Underwater Platings. ( A ) Remove Marine Fouling From The Hull Using Hydro Jet With Maximum Pressure Not Exceeding 3000 Psi. ( B ) Areas Where Breakdown Of Abrasive Anticorrosive Paints Observed, To Be Blasted And Recoated With Full Paint Scheme. ( C ) Paint Scheme On Full Underwater Hull And Boot Top Including Wind And Water Areas I.E. Area Up To 500Mm Above Boot Top Area Is To Be Restored. ( D ) Application Of One Coat Of A / F Paint On Underwater Hull And Boot Top Area To Be Carried Out Post Adequate Surface Preparation. Quote For Services And Material. 63 Draught Marks. Draught Marks To Be Painted With Paint Scheme As Under Water Area And Top Coat To Be Painted With White Paint. ( A ) Fwd ( B ) Midship & ( C ) Aft. Renew Defective Draught Marks. Quote For Services And Material. 64 Above Water Area ( Ship Side, Superstructure And Fittings, Davit, Windlass, Capstan ) . ( A ) Clean The Hull Using Hydro Jet With Maximum Pressure Not Exceeding 3000 Psi. Damaged Area To Be Blasted Up To Bare Metal. ( B ) Carry Out Painting Of Above Water Area With High Performance ( Hpp ) Advanced Hybrid Coating System For Above Water Area ( Ship Side & Superstructure ) As Per Paint Scheme Mentioned Below:- ( I ) 02 Coats Of Primer To Achieve 80 Microns Dft. ( Ii ) 02 Coats Of Ral 7040 Colour Specification To Achieve 80 Microns Thickness. ( Iii ) Total Dft - 320 Microns. Note. Navy Approved Paint To Be Used. Requirement Of Paint, Other Consumables And Staging To Be Catered For By The Vendor. Quote For Services And Material. 65 Life Saving Appliances. ( A ) Stretcher ( Qty 01 ) For Life Saving Damaged. To Be Renewed. Size - Standard. ( B ) First Aid Box Locker Damaged At Various Location. To Be Renew And Fitted On Specific Locations. ( Oem - M / S Godrej & Boyce Mfg Co Ltd. ) . ( C ) Life Jacket With Light And Whistle Damaged ( Qty 19 ) . To Be Renewed As Per ( Lsa Code Msc 207 ( 81 ) ) . Testing Of Life Jackets To Be Carried Out. Quote For Service And Material. 66 Water Filter Cum Purifier Defective / Damaged In Crew Dining Hall. To Be Renewed. Job Involves Fitment. Quote For Services And Material. 67 Following Defective Wc And Bathroom Accessories To Be Renewed. ( A ) Shower - 05, ( B ) Water Tap - 06, ( C ) Urinal With Full Fittings And Accessories - 03, ( D ) Commode With Full Fittings And Accessories - 04, ( E ) Two Way Basin / Sink - 04. Note. Defective Valves And Reducers, To Be Renewed. Quote For Services And Material. 68 Carryout Chemical Cleaning Of All Trunkings. Renew Perished / Damaged Trunkings On Upper Deck And Mess. Paint To Be Restored Post Repairs As Per Existing Paint Scheme ( Qty - 80 Sqm ) . Quote For Services And Material. 69 Hose Box Damaged / Broken At Various Location ( Qty 07 ) . Securing Brackets Corroded. To Be Manufactured And Refitted In-Situ. Mat - Grp. Quote For Services And Material. 70 Weather Deck & Bridge Top Deck Corroded / Undulation At Various Location. Hydro Blasting To Be Under Taken Prior Survey. Defects To Be Rectified As Per Survey Report Of Yard. ( A ) Aarea To Be Painted With High Performance Non- Skid Coating System For Weather Decks ( Hpp ) Paint Scheme As Mentioned Below Post Defect Rectification And Plate Renewal As Per Survey Report. ( B ) 07 Years Guarantee Paint Scheme Of Da Grey Colour To Be Used. ( C ) Navy Approved Paint Scheme To Be Used. ( D ) Paint Scheme Of Weather Deck And Platforms:- ( I ) 01 Coat Primer Coat - Dft 50 Microns. ( Ii ) 01Coat Anti Corrosive Intermediate Coat - Dft 200 Microns. ( Iii ) 01 Coat Non-Skid Top Coat - Dft - 800 Micron. ( Iv ) Total Dft - 1050 Microns. Note. Paint To Be Restored As Per Paint Scheme Post Repair And Inspection. Paint To Be Provided By Refitting Firm.Quote For Services And Material. 71 Combing Around Wheel House Deck Corroded / Damaged. To Be Repaired / Renewed In Situ. Mat - Ms Quote For Services And Material. 72 Panelling Damaged / Corroded At Various Location. To Be Renewed. Mat - Ss. Job Involves Removal Of Existing Panels And Fitment. Quote For Services And Material. 73 02 Mooring Rope Reel, 01 Towing Rope Reel And 01 Cable Reel Broken. To Be Manufactured And Replaced In-Situ. Job Involves Welding And Cutting Assistance And Fitment. Quote For Services And Material. 74 ( A ) Ships Name Box Along With Lighting Arrangement Defective. To Be Renewed. Mat - Ms ( Qty – 02 ) . ( B ) Ships Name Board On Port And Stbd Side To Be Renewed. Mat - Wood ( Qty – 02 ) . Quote For Services And Material. 75 Microtech Damaged At Various Location. Removal Of Old Microtech To Be Undertaken. Surface Preparation To Be Carried Out For Hull Survey. Defects To Be Rectified As Per Survey Report Of Yard. Microtech To Be Renewed Post Application Of Primer On Deck. Quote For Services And Material. 76 Dado Area In Wet Compartment Corroded / Damaged. To Be Repaired / Renewed. Job Involves Removing Of Gutting Degutting Of Panels. Quote For Services And Material. 77 Heavy Duty Tyre Fenders Of Barge Found Damaged. Renewal Of Fenders To Be Carried Out. Hot Work Required For Removal And Fitment Of Tyre Fenders To Be Carried Out ( Qty -20 ) With 60 Eye Pads And 16 Mm Galvanised Chain Along With D Shackle. Undertake Apt Of Hot Work Tanks If Any. New Heavy Duty Tyre Fenders To Be Provided By Firm. Quote For Services And Material. 78 Wire Mesh And Ball Valve Of Air Vent On Upper Decks Be Replaced If Required. Structural Defects On Air Vents To Be Repaired. Quote For Services And Material. 79 Strip, Clean And Overhaul Domestic Fresh Water System Valves, Stop Cock ( Qty 05 ) , Basin Beep Cock ( Pillar ) ( Qty 04 ) , Sink Beep Cock ( Pillar ) ( Qty 01 ) . Mat - Brass ( Chrome Plated ) . Quote For Services And Material. 80 ( A ) Ventilation Flaps Of All Compartments, Wire Mesh Broken, Air Vent Corroded, Flaps Rubber Beading Perished, Hinges And Butterfly Nuts Corroded, Ventilation Lowers Damaged / Corroded. To Be Renewed ( Qty 16 ) . ( B ) Punka Lowers Damaged At Various Trunkings. To Be Renewed And Fitted. Material To Be Provided By Firm ( Qty - 05 ) . Quote For Services And Material. 81 Cathodic Protection Sacrificial Anodes-Renew Sacrificial Anodes Fitted To Under Water Hull, Voith Blade, Rope Guard, Shaft Tunnel, Stern Tubes, Inlet And Outlets, Seachest, Biges And Cofferdams. 82 Enginering Dl: ( Port And Stbd Main Engine, Wartsilla, Model : 8L-26 2000H ) :- Carry Out 2000 Hourly Routine Of Main Engine :- ( A ) Check Engine Oil Leakage, Fixation Of Piping, Cables And Wring Rectify Leakage And Loose Cable Connection. N ( B ) Check Engine On Bolt Connection, Repair Loose Bolts. N ( C ) Check Engine Drain Points Of Charge Air Receiver And Possible Water. N ( D ) Check Oil Level, Charge Oil If Required. N ( E ) Check Foundation Bolt And Chocks. Repair If Required. N ( F ) Renew Fuel And Lub Oil Filter. N ( G ) Clean Centrifugal Filer. N ( H ) Drain Starting Air Vessels And Air Treatment Units. N ( J ) Servicebility Checks Of Ht And Lt Cooling Water. N ( K ) Clean Air Compressor By Water Injection. N ( L ) Inspect And Clean Air Filter To The Turbo Charger. N ( M ) Check Function Of By-Pass And Waste Gate Assembly. N ( N ) Lubricate Fuel Control Mechanism Linkage. N ( P ) Check If Alarm And Safety System Is On With Running Engine, Rectify If Not Working. N ( Q ) Check Function Of Measuring Devices, Calibrate If Not Working Properly. N ( R ) Check Function Of Oil Mist Detector, Calibrate If Not Working Properly. N ( S ) Check Operation Of Turning Gear And Start Inter Lock Device, Repair / Calibrate If Malfunctioning. N ( T ) Check / Adjust Valve Clearance. N ( U ) Main Engine Ups Control Panel Door Damaged. To Be Renewed. N ( V ) Main Engine Fresh Water Cerculating Pump No.1 Breaker Tripping Frequently. Defect To Be Rectified. N ( W ) Both Me Lcp Display Malfunctioning. To Be Renewed. N ( X ) Turbocharger Outlet Temperature Sensor Faulty, To Be Replaced ( Port Main Engine ) N ( Y ) Both Main Engine Starting Air Line Water Trap Valves To Be Overhauled N ( Z ) Both Pre-Heater To Be Dismantled, Mechanically Cleaned And Boxed Back. System To Be Pressure Tested And Proved For Operation Post Fitment Of Pre-Heater. Test Pr- 3 Kg / Cm2. N ( Aa ) Both Pre- Hetaer Circulating Pump Alongwith Motor To Be Overhauled N ( Ab ) Main Engine Expansion Tanks ( Qty - 03 ) To Be Cleaned And Paint To Be Restored As Per Paint Scheme. Respective Sight Glass ( Qty-01 ) To Be Renewed. N ( Ac ) Stbd Main Engine Rpm Not Exceeding Beyond 260 At Idle As Against 600 Rpm, Defect To Be Rectified ( M / S Wartsila Engine ) N ( Ad ) Fuel Injectors Of Both Main Engines To Be Calibrated ( M / S Wartsila Engine ) N ( Ae ) Governor Calibration Of Stbd Main Engine To Be Undertaken ( M / S Europe Actuatore ) N ( Af ) Excessive Lub Oil Consumption On Both Main Engine. Dr To Be Undertaken N N 83 ( Port And Stbd Da, M / S Cummins India Ltd, 3000H ) :- Carry Out 3000 Hourly Routine :- N ( A ) Remove Injectors. Clean, Inspect, Repair & Calibrate With New Spares. N ( B ) Remove Heat Exchanger. Clean & Pressure Test. N ( C ) Remove Turbocharger. Clean, Inspect & Repair With New Repair N Kit ( Check Turbocharger End Play And Radial Clearance ) Ntighten Nut & Cap Screw Of Air Inlet And Exhaust System. Ncheck Vibration Damper Visuallyrepair If Defective. N ( D ) Replace Belts And Accessories. N ( E ) Check All Cut-Out & Safety Controls. Renwe If Defective. N ( F ) Flush Cooling System With Restore Plus, Run Engine To Bring It To Operating Temperature. Stop The Engine Reflush Cooling System With Portable Water 2-3 Times. Refill Cooling System With Coolant. Run The Engine For Three To Five Minutes. N ( G ) Post Completion Of Routines, Start The Engine And Check All Gauges, Replace If Required, Check For Oil / Water Leakage, Exhaust Leakage, Stop The Engine And Recheck Engine Oil Level, Top Up If Required. After Necessary Inspection Restart The Engine. Run At Idle Speed For 15 Minutes; Carry Out Safety Device Checks. Undertake Full Load Trials On Completion. Post Complition Of Routine Carry Out Sdc Checks And Load Trails, Calibrate / Renw Defective Safety Divices. N ( H ) Da Control Panel Door Damaged. To Be Renewed. 84 Port And Stbd Voith Turbo Schneider, Model - 21 R 5 / 150-2:- Carry Out Docking Routines And 5000 Hourly Routines :- ( A ) Check The Screw Joint Renew If Dfective. N ( B ) Check For The Leakage From Blade Shaft Sealing, If There Any Keajage Rectify It. N ( C ) Check For The Leakage From Main Seal, Change Seal If Defective. N ( D ) Check Main Gear Toothing For Any Damage, Rpair It If Damaged. N ( E ) Check The Input Gear Rpair It If Damaged. N ( F ) Check For The Leakage From Mounting Gear. If There Is Any Leakage Rectify It. N ( H ) Check For Leakage From The Propeller Well. If There Is Any Keajage Rectified It. N ( J ) Check For Correct Fuctionnig Of Rotor Space Ventilation Repaired It If Defective. N ( K ) Renew Corrosin Protection. Note. Quote For Services And Material / Spares. N 85 Fuel And Lub Oil Centrifuge Make-Alfa Laval Pa 605:- Carry Out Five Yearly Routines On Fuel And Lub Oil Centrifuge :- ( A ) Clean And Inspect Inlet And Outlet Pipe Threads, Paring Disc, Housings And Frame Hood. Renewed Damaged / Defective Parts. N ( B ) Clean And Inspect Separator Bowl, Top Disc, Bowl Discs, Distributor, Nozzles In Bowl Body, Sliding Bowl Bottom, Discharge Mechanism, Threads On Bowl Hood And Bowl Body, Bowl Spindle Cone And Bowl Body Nave, Renewed Damaged / Defective Parts. N ( C ) Clean And Inspect Oil Mist Fan, Oil Pump, Water Tank, Bowl Spindle, Ball Bearing Housing, Indentations And Radial Bobble Of Bowl Spindle, Renewed Damaged / Defective Parts. N ( D ) Clean Oil Sump, Change Oil And Oil Filling Device. N ( E ) Clean And Inspect Friction Coupling, Renewed If Defective. N ( F ) Replace Electric Motor Bearing. N 86 Ows Make-Suyash, Modle-Sd0.5:- Carry Out Five Yearly Routines :- ( A ) Replace Coalesce. N ( B ) Replace Adsorber Elements. N ( C ) Replace Stuffing Box Packing. N ( D ) Check Stator And Rotor, Replace Worn Out Component. N ( E ) Replace Zinc Anode. N ( F ) Check Oil Level Of Pump Gear, Fill Up If Required. N ( G ) Open The Inspection Port Of The Oil Separator Housing, The Oil Separator Housing And The Adsorber Housing. Replace Worn Out Parts. N ( H ) Remove The Sludge And Clean Container. N ( I ) Check Seal And Piston Valves, Replace Damaged Seal And Components. N ( J ) Replace Sensor Electrode. N ( K ) Checks The Function Of Heater, If Defective Replace It. N ( L ) Shore Suuply Connection Box Damaged. Box To Be Renewed To Ensure Water Tight Integrity. N 87 Reciprocating Air Compressors Make Elgi ( Model Hp 10 300 ) :- Carry Out 1000 Houlry Routines Of Air Compressor :- ( A ) Change Oil. N ( B ) Observed Noise And Vibration. N ( C ) Check Fasteners, Renwed If Dfective. N ( D ) Check For Air Leakage, Rectify If There Any Air Leakage. N ( E ) Adjust Pressure Setting As Per Manual. N ( F ) Change Inlet Air Filter. N ( G ) Clean Breather Valve. N ( H ) Inspect Valves, Renewed If Defective. N ( I ) Check Nrv, Repaired If Defective. N ( J ) Check Cooler, Repaired If Defective. N 88 Co2 Fire Fighting System:- Carry Out Sr Yearly Routines On Co2 Fire Fighting System :- ( A ) Carry Out Survey Of Piping. Repair / Renew As Required. N ( B ) Calibrate Weighing Beam Scale ( Where Fitted ) . N ( C ) Check All Flexible Hoses For Cracks, Embrittlement And Sign Of Cracking. Renew Them After Assessing The Condition N ( D ) Overhaul Non-Return Valves And Safety Stop Valves ( Where Fitted ) . N ( E ) Remove And Inspect Cylinder Operating Heads. Test For Correct Functioning. N ( F ) Renew Bursting Discs Fitted In Pipe System ( Where Fitted ) . N ( G ) Weigh The Co2 Cylinder Using Beam Scale. If The Weight Falls Below 10% Of Initial Weight, Recharge The Cylinders. Maintain Record In Log Book. N ( H ) Admit Lp Air Into Ring Main Checking The System For ( J ) Leaks. Ensure That All The Discharge Pipes And Nozzles Are Clear. Calibrate Pressure Gauges Fitted In The System. N ( K ) Check Audio Visual Alarm Function, Limit Switches In Control Penal For Operation, Renewed If Defective . Note- Quote For Services And Material / Spares 89 Serviceability Checks Of Co2 Fire Fighting Control System To Be Undertaken And Repaired With Spares As Required. Note- Quote For Services And Material / Spares 90 Hinges To Be Provided On Chequred Plates Of Engine Room For Operating System Valves. Note- Quote For Services And Material / Spares 91 Sea Water Suction Strainers :- Remove Inspect, Clean And Paint With Epoxy Coating For Following Suction Strainers : Main Sea Chest, Bilge Suction And Da Suction. Renew If Required. Mat - Ss As Per Sample Note- Quote For Services And Material / Spares 92 System Pipelines :- Removal, Chemical Clean And Repair System Pipelines. Pressure Testing To 1.5Xworking Pressure ( Kg / Cm2 ) , Undertake Fitment Onboard And Prove For Satisfactory Performance :- Galvanised Steel ( A ) 100Mm 93 ( B ) 80Mm 94 ( C ) 65Mm 95 ( D ) 50Mm 96 Copper. ( A ) 40Mm 97 ( B ) 32Mm 98 ( C ) 25Mm 99 ( D ) 20Mm 100 ( E ) 18Mm 101 ( F ) 15Mm 102 Cu-Ni ( A ) 125Mm 103 ( B ) 100Mm 104 ( C ) 80Mm 105 ( E ) 65Mm 106 ( F ) 50Mm 107 ( G ) 40Mm 108 ( H ) 25Mm 109 System Pipelines :- Renew With End Fittings, Pressure Test To 1.5Xworking Pressure ( Kg / Cm2 ) , Fit Onboard And Prove. ( A ) Air Vent & Filling System, 150Mm 110 100Mm 111 65 Mm 112 50 Mm 113 Copper ( A ) Lub Oil & Sanitary System, 40Mm 114 32Mm 115 25Mm 116 20Mm 117 18Mm 118 15Mm 119 12Mm 120 Both Main Engine Fly Wheel Safety Guards Damaged. Guards To Be Manufactured. Note- Quote For Services And Material / Spares 121 Flap Cover Perished, To Be Renewed N ( A ) Stbd Main Engine Exhaust Funnel. N ( B ) Provision Of New Dd Compressure Exhaust Outlet Flap Cover Note- Quote For Services And Material / Spares 122 External Fire Fighting System Make-Jason Engg Ais, Modle-Sru-C255 Vk1.8Ccw-02 :- Port Fi Fi Clutch Lub Oil Cooler To Be Cleaned And Pressure Test To Be Carried Out. Serviceability Checks Of System To Be Undertaken Including Necessqary Spares. Note- Quote For Services And Material / Spares 123 Lub Oil Transfer Pump Make-Tushaco, Modle-R-20-Dg :- Pump To Be Overhauled View High Vibration. Note- Quote For Services And Material / Spares 124 External Fire Fighting System:- Actuator Of Nozzle Of Fifi System On Top Of Bridge Not Operating. Same To Be Repaired / Renewed Note- Quote For Services And Material / Spares 125 Following Defects On Fifi System N ( A ) Clutch Not Engaging In Remote Mode. Dr To Be Undertaken. N ( B ) Fifi System Pipe Line Cracked / Damaged At 08 N Locations. Leakages To Be Rectified And System To Be Pressure Tested. Dia- 300 Mm, Mat- Cu Ni N ( C ) Operating Wheels Of Fifi System Valves ( 08 Nos ) Damaged. Same To Be Renewed. N ( D ) Hydraulic Valves Of Fifi System To Be Overhauled With Spares, Size - 300Mm, Qty-02 Note- Quote For Services And Material / Spares 126 Pressure Regulating Valves N ( A ) Operating At High Pressure Than Normal ( 01 In No ) , To Be Overhauled ( Range- 30 To 5 Bar ) N ( B ) Prv Operating At High Pressure Than Normal ( 02 Nos ) , To Be Overhauled ( Range- 30 To 9 Bar ) Note- Quote For Services And Material / Spares 127 Both Ru Tank Sight Glass Damaged. To Be Renewed. Note- Quote For Services And Material / Spares 128 Overhaul Air Starting Motor Of Main Engine, Make Wartsila Note- Quote For Services And Material / Spares 129 Fresh Water System Filling Point At Weather Deck Perished Same To Be Renewed With Flanges ( Aprrox Length- 0.25 Mtr. Mat-Gun Metal, Dia-65 Mm Nnote- Quote For Services And Material / Spares 130 Repair / Renewal Of Hand Pump Fitted On Foxle Note- Quote For Services And Material / Spares 131 Following Oil Pressure Setting To Be Adjusted On Both Voith-: ( A ) Lub Oil Pressure ( B ) Control Oil Pressure , Rotor Oil Pressure. 132 Voith Turbo Schneider, Model - 21 R 5 / 150-2 :- Following Voith Parameter Not Showing In Mcr Alarm Monitor Panel:- ( A ) Control Oil Pressure, ( B ) Lub Oil Pressure, ( C ) Rotor Oil Pressure, ( D ) Bearing Oil Temperature. To Be Rectified. 133 Safety Device Checks To Be Undertaken On Both The Voith System 134 Air Starting Motor Of Port Main Engine Defective, To Be Repaired With Oem Listed Spares As Required . 135 Valves Of Various Systems :- Removal, Overhauling, Pressure Testing And Fitment Of Following System Valves:- ( A ) 65 Mm Sdnr Valve 136 ( B ) 65 Mm Sd Valve 137 ( C ) 80 Mm Gate Valve 138 ( D ) 80Mm Globe Valve 139 ( E ) 125 Mm Strom Valve 140 ( F ) 150 Mm Sdnr Valve 141 ( G ) 200 Mm Gate Valve 142 ( H ) 200 Mm Butter Fly Valve 143 ( J ) 300 Mm Butter Fly Valve 144 ( K ) 100 Mm Gate Valve 145 ( L ) 40 Mm Sdnr Valve 146 ( M ) 40 Mm Globe Sd Valve 147 ( N ) 40 Mm Sd Valve 148 ( O ) 32 Mm Sd Valve 149 ( P ) 15 Mm Sdnr Valve 150 ( Q ) 65 Mm Strom Valve 151 ( R ) 80 Mm Strom Valve 152 ( S ) 125 Mm Sdnr Valve 153 ( T ) 50 Mm Quick Shut Down Valve 154 ( U ) 50 Mm Sdnr Valve 155 ( V ) 20 Mm Sdnr Valve 156 ( W ) 25 Mm Quick Shut Down Valve 157 ( X ) 15 Mm Cock Valve 158 Remove, Dismantle, Chemically Clean, Assemble And Pressure Test To Required Pressure With Spares For The Following N ( A ) Lub Oil Heat Exchangers Of Both Main Engine N ( B ) Both Alfa Cooler To Be Insitu Dismantled, Nmechanically Cleaned And Boxed Back With New Gaskets. System To Be Pressure Tested And Proved For Operation Post Fitment Of Coolers. Test Pr- 3.5 Kg / Cm2. N ( C ) Existing Inlet And Outlet Pipe Of Both Alfa Coolers To Be Repaced With Cu-Ni Pipe. Length- 0.3 Mtr, Mat- Ss, Dia- 80 Mm N ( D ) Sea Water Inlet Pressure Guage Line Adaptor Of Both Alfa Cooler Damaged, To Be Renewed Note- Quote For Services And Material / Spares 159 Renewal Of Hot Lagging For Da And Main Engine Compartment Note- Quote For Services And Material / Spares 160 Temperature Gauges Of Various System Lines To Be Renewed. Note- Quote For Services And Material / Spares 161 Suction And Discharge Pressure Gauges Of Various System Lines To Be Renewed. Note- Quote For Services And Material / Spares 162 Overhauling Of Fire Hydrants To Be Carried Out.Note- Quote For Services And Material / Spares 163 Leakage Observed From Dirty Oil Pipe Flange. Brazing And Pressure Test To Be Carried Out. Mat-Cu Ni, Dia-50 Mm. Note- Quote For Services And Material / Spares 164 Leakage Observed From Fuel Filling Line In Engine Room. Pipe To Be Replaced. Dia-50 Mm. Lenght-0.5Mtr, Mat-Ms.Note- Quote For Services And Material / Spares 165 Port Main Engine Breather Line Cracked. Pipe To Be Renewed. Mat-Ms, Dia-85 Mm, Length-0.5 Mtr.Note- Quote For Services And Material / Spares 166 Both Da Lub Oil Temperature Increasing. Both Lub Oil Cooler To Be Cleaned And Pressure Tested.Note- Quote For Services And Material / Spares 167 Both Da Sea Water Pressure Line Perished. Line To Be Replaced. Dia-5 Mm. Lenght-10 Mtr, Mat-Copper. Note- Quote For Services And Material / Spares 168 Port Main Engine Speed Sensor No-St173 And Temperature Sensor Is Not Operational. Sensors To Be Replaced With New Sensor. Note- Quote For Services And Material / Spares 169 Lub Oil Leakage Observed From Turbo Charger Return Line. Defect To Be Rectified. 170 Fuel Centrifugal Filter Of Main Engine Defective. Fuel Centrifugal To Be Replaced. Note- Quote For Services And Material / Spares 171 Air And Co2 Bottles To Be Pressure Tested At 1.5 Times Of Working Pressure. 172 Electrical Dl:Clean Winding And Ventilation Ducts. Check Condition Of Winding Insulation Including End Connections And Renew Windings If Insulation Values Below 1 M Ohm. Check Stator Connection For Good Contact, Retighten Screws. Replace Earthing Terminals. Carry Out The Complete Overhaulling Of Excitation Panel And Replace Spares Required For Factory Designed Performance. Check For Healthiness Of Avr. Avr Tuning To Be Undertaken By Vendor If Required Based On Trial / Performance Reports. Vendor To Also Cater For Avr Replacement If Required. Load Trials To Prove Performance Of Alternator To Be Undertaken By The Vendor. Requisite Load Bank Also To Be Arranged By The Vendor. Quote For Services And Spares. 173 Navigation Control Panel To Be Overhauled And Repair Of Defective Lamps To Be Undertaken . Note- Quote For Services And Material / Spares 174 Repair Of Mb Sre Amplifier Unit To Be Carried Out 175 Emergency Lights With Assembly In Various Locations Defective. To Be Replaced With New Lights. Quote For Services And Spares. N 176 Fifi Monitor Remote Operation Non-Ops. Suspected Cable Damaged. Cable To Be Replaced And Rotary Switch To Be Renewed. Cable Specifications : 1 Sq Mm, 2 Core. Note- Quote For Services And Material / Spares 177 Carry Out Sr Routines Of All Transformers Fitted Onboard With Oem Recommended Components As Required:- ( A ) Using A Soft Brush And Vacuum Cleaner, Clean And Blow-Out Dust Nand Dirt From The Terminal Insulation Block, Between Lamination And Nthe Side And Bottom Ventilation Grills. N ( B ) Check Tightness Of All Connections And Earth Bonding Straps. Tight Loose Connections. N ( C ) Check All Lamination Securing Nuts For Tightness. Tight Loose Nuts. N ( D ) Examine Condition Of Insulation And Cable Spills For Sign Of Ncracking And Over-Heating. Change Low Insulations / Damaged Cable. N ( E ) Grease Threads Of Cover Securing Nuts And Bolts Using Anti-Seize Ngrease And Replace Covers. N ( F ) Examine Shock / Vibration Mountings, Renew If Required. N ( G ) Clean Out Using Soft Brush And Blower. N ( H ) Check All Connections And Terminal Screws Are Tight. N ( I ) Examine All Wiring For Signs Of Deterioration. Renewed Defective N ( J ) Examine Components For Over-Heating / Cracking And Capacitors Nfor Leakage. Renewed Defective Parts. N ( K ) Revarnishing Of The Coils To Be Undertaken Post Routines N N 178 Motors & Starters:- Carry Out Overhauling Of Following Motors And Starters ( Including Remote Operation ) . Motor Bearings To Be Replaced And Trials To Be Offered To Ship Staff. Rewinding Of The Motors To Be Undertaken If Insulation Values Below 1 M Ohm. Replacement Of Ber / Aber Motors To Be Undertaken As One To One Replacement. Vendor To Also Cater For Dismantling And Refitment Of The Motor. Equipment Performance To Be Restored To Factory Designed Condition. Replacement Of All Defective Parts To Be Catered By The Vendor. Note- Quote For Services And Material / Spares - ( A ) Fire & Gs P / P ( 7.5Kw ) 179 ( B ) Bilge Ballast Gs Pp ( 11Kw ) 180 ( C ) Fo Transfer Pump ( 0.75Kw ) 181 ( D ) Lo Transfer Pp ( 0.75Kw ) 182 ( E ) E / Room Supply Fan ( 7.5Kw ) 183 ( F ) Dirty Oil Pp ( 0.75Kw ) 184 ( G ) Lub Oil Cetrifuge ( 0.75Kw ) 185 ( H ) Voith Cooling Pp ( 3.7Kw ) 186 ( J ) Windlass Motor ( 5.6Kw ) 187 ( K ) Capstan Motor ( 7.5Kw ) 188 ( L ) O / Bilge Water Seperator ( 0.55Kw ) 189 ( M ) Boat Davit ( 7.5Kw ) 190 Lighting Circuit Cable And Switches ( 30 Nos ) At Various Locations Perished / Damaged. Cable / Switch Renewal To Be Undertaken. Cable Specifications 2.5 Sq Mm, 2 Core. 191 Rewinding Of 10Kva Lighting Transformers View Low Insulation Of Primary And Secondary Windings. Note- Quote For Services And Material / Spares 192 Sart Battery To Be Replaced And Instruments To Be Tested On Board. Battery Specification 12 V, 7 Ah. Note- Quote For Services And Material / Spares 193 Renewal Of 08 In No. Mob Fitted On Weather Deck, Type Lsa Code Msc 207 ( 81 ) . Note- Quote For Services And Material / Spares 194 Repair Of Navigational Lights Fitted On Main Mast Qty - 04 . Note- Quote For Services And Material / Spares 195 Replacement Of Test Equipments:- Multimeter Make- Fluke. 196 Tong Tester . Make- Fluke. 197 Analog Megger. Make- Fluke. 198 Replacement Of Battery And Hrg ( Hydrostatic Release Gear ) Of Epirb. Battery Specs - 12 V, 7 Ah.Note- Quote For Services And Material / Spares 199 Echo Sounder Calibration Including Fitting Of Hull Appendages To Be Undertaken. Printer Fitted In Wheel House Defective. To Be Replaced. Note- Quote For Services And Material / Spares 200 E / R Alarm Panel Display Monitor Not Working. To Be Replaced. 201 Split Ac Fitted In Wheel House Defective. To Be Repaired. Note- Quote For Services And Material / Spares 202 Control Batteries Of Da To Be Replaced. 12 V 120 Ah 203 Control Batteries Of Da To Be Replaced . 12 V 150 Ah 204 Control Batteries Of Da To Be Replaced . 12 V 180 Ah 205 Control Batteries Of Da To Be Replaced . 12 V 200 Ah 206 Tank Content Gauges ( Nivo System ) Not Working. Functional Checks All Gauges To Be Carried Out. Defective Components And Sensors To Be Replaced. Tank Level Calibration To Be Undertaken Thereafter. Display Module Serviceability Checks And Calibration To Be Undertaken. Replace If Ber / Defective. Quote For Services 207 Tubelight Fitted Onboard At Various Locations To Be Replaced With Led Tubelights . Note- Quote For Services And Material / Spares 208 Serviceability Of Magnetic Compass And Anemometer To Be Undertaken Followed By Calibration With Spares. Renew If Defective. Qoute For Services And Spares 209 Air Whistle Not Working. Overhauling And Repair To Be Undertaken With Oem Recommended Components As Required. Quote For Services And Spares 210 E / R General Calling Alarm Not Working. To Be Repaired 211 Spt Fitted Onboard At Various Locations Found Defective, To Be Replaced. 212 Window Wiper And Associated Mechanisms And Clear View In Wheel House Defective. To Be Renewed Including Spares. Quote For Services And Spares. 213 E / R Alarm Panel Display Key Board In Wheel House Not Working. To Be Repaired With Oem Recommended Components As Required. 214 03 In No Flood Light And 02 In No Search Light Not Working. To Be Replaced. Note- Quote For Services And Material / Spares 215 Port Main Engine Emergency Stop Push Button Is Defective At The Wheel House. To Be Replaced With New One. 216 Renewal Of Flood Lights Fitted In Engine Room With Led Lights. Note- Quote For Services And Material / Spares 217 Double Pole Switch With Single Way Are Defective. To Be Replaced With New One. Note- Quote For Services And Material / Spares 218 Deck Lights Guard / Fitting Are Broken. To Be Replaced With New One. Note- Quote For Services And Material / Spares 219 Repair Gps Display Unit Garmin With Oem Recommended Components As Required And Undertake Serviceability Checks. Note- Quote For Services And Material / Spares 220 Tru Batteries Not Holding Charge. To Be Replaced With New One 12V 180 Ah Maintenance Free Batteries . Note- Quote For Services And Material / Spares 221 Following Defective. To Be Repaired / Replaced N ( A ) Wall Mounted Fan Defective ( 20 Nos ) . N ( B ) Galley Hot Plate ( 02 Nos ) 222 5Kva Ups Defective. Batteries To Be Renewed. Battery Specification 12 V, 150 Ah ( 2 Nos ) 223 Deck Washing Machine Non Opertional To Be Renewed. Note- Quote For Services And Material / Spares 224 Lighting Switches Are Broken At Various Locations. To Be Replaced With Holder Assembly. Note- Quote For Services And Material / Spares 225 Serviceability Checks Of Navigational Radar Including Vswr And Power Output Checks. Replace Defective Transreceiver Pcb And Other Components As Necessary. Qoute For Services And Spares. 226 Hull Spares: Capstan Fixed Contacts. ( Ser No. 18 ) 227 Moving Contacts ( Ser No. 213 ) 228 Indicating Lamps ( Red ) . ( Ser No. 210 ) 229 Fuse Links ( Ser No. 206 ) 230 Controller Contacts ( Fixed ) ( Ser No. 190 ) 231 Controller Contacts ( Moved ) ( Ser No. 190 ) 232 Friction Lining For Disc Brake ( Ser No. 14 ) 233 Boat Davit Limit Switch ( Ser No. 31 ) 234 Fuse Elements ( 2A, 4A, 32A ) ( Ser No. 200 ) 235 Indicating Lamps ( Red ) ( Ser No. 206 ) 236 Push Button ( Green ) ( Ser No. 206 ) 237 Liner For Brake ( Ser No. 25 ) 238 Fuse For ( 1A, 2A, 4A, 10A, 16A, 32A ) ( Ser No. 178 ) 239 Master Controller Contact Kits ( Ser No. 177 ) 240 Contractor Kits ( Ser No. 174 ) 241 Lamps ( Ser No. 173 ) 242 Bearing For Motor ( Ser No. 179 ) 243 Friction Liner For Disc Brake ( Ser No. 14 ) 244 Gland Packing, Walker Remix ( P.No.Bba2522-879 ) ( Ser No. 26 ) 245 Indication Lamps ( Ser No. 21 ) 246 Mp Filter Hp0372a10an, Italy ( P. No. Hp0372a10an ) ( Ser No. 24 ) 247 Washer Od 100X1d 80 ( Ser No. 24 ) 248 Main Engine, Wartsilla, Model : 8L-26 Spares :- Fuel Filter ( 4761002 ) ( Ser No. 82 & 158 ) 249 Filter Paper ( 4713047 ) ( Ser No. 82 & 158 ) 250 Gasket ( 1072002 ) ( Ser No. 82 & 158 ) 251 Gasket ( 1072003 ) ( Ser No. 82 & 158 ) 252 O-Ring 20X3 ( 121007 ) ( Ser No. 82 & 158 ) 253 O-Ring ( 4712063 ) ( Ser No. 82 & 158 ) 254 Gasket ( 4712062 ) ( Ser No. 82 & 158 ) 255 Screw ( 218003 ) ( Ser No. 82 & 158 ) 256 Valve ( 2180049 ) ( Ser No. 82 & 158 ) 257 O-Ring ( 2180059 ) ( Ser No. 82 & 158 ) 258 Starting Air Pipe ( 2180063 ) ( Ser No. 82 & 158 ) 259 Sealing Ring ( 2180076 ) ( Ser No. 82 & 158 ) 260 O-Ring ( 2180077 ) ( Ser No. 82 & 158 ) 261 Washer ( 2180085 ) ( Ser No. 82 & 158 ) 262 Gasket ( 2180086 ) ( Ser No. 82 & 158 ) 263 Following Spares Main Diesel Alternator Model:6Cta8.3D / M ( Mandatory Spares ) :- Element Lub Oil ( Lube Oil Filter ) Make : Fleetguard ( 3401544 ) ( Ser No. 83 ) 264 Ring Compress ( 3919918 ) ( Ser No. 83 ) 265 Ring Compress ( 3922686 ) ( Ser No. 83 ) 266 Ring Retainer ( 3920692 ) ( Ser No. 83 ) 267 Ring, Oil Piston ( 3921919 ) ( Ser No. 83 ) 268 Regulator, Vol. Stamford Mx321, Eoo-23212 ( 2890759 ) ( Ser No. 83 ) 269 Rectifier ( 2890014 ) ( Ser No. 83 ) 270 Bearing, Main ( Thrust ) ( 3944153 ) ( Ser No. 83 ) 271 Bearing, Main ( Thrust ) ( 3944158 ) ( Ser No. 83 ) 272 Bearing Crank ( Thrust ) ( 3944163 ) ( Ser No. 83 ) 273 Valve, Intake ( 3924492 ) ( Ser No. 83 ) 274 Valve, Intake ( 3921444 ) ( Ser No. 83 ) 275 Collet, Valve ( 3901177 ) ( Ser No. 83 ) 276 Guide, Valve ( 3925863 ) ( Ser No. 83 ) 277 Injector ( 3926787 ) ( Ser No. 83 ) 278 Valve Spring ( 3991085 ) ( Ser No. 83 ) 279 Gasket, Exh. Ou; ( 3873509 ) ( Ser No. 83 ) 280 Valve Insert ( 3970278 ) ( Ser No. 83 ) 281 Bearing Connection ( 3901430 ) ( Ser No. 83 ) 282 Piston Pin ( 3934046 ) ( Ser No. 83 ) 283 Fuel Filter ( 3931063 ) ( Ser No. 83 ) 284 Valve Insert ( 3908830 ) ( Ser No. 83 ) 285 Element Air Cleaner ( 3814313 ) ( Ser No. 83 ) 286 Element Air Cleaner ( 3814312 ) ( Ser No. 83 ) 287 Gasket Set ( Gasket Turbo ) ( 3755843 ) ( Ser No. 83 ) 288 Belt V Ribbed ( 3289124 ) ( Ser No. 83 ) 289 Seal, Valve St ( 3927642 ) ( Ser No. 83 ) 290 Bolt, Connection ( 3928870 ) ( Ser No. 83 ) 291 Nut Connection ( 3934864 ) ( Ser No. 83 ) 292 Pump Fuel Injector ( 5263870 ) ( Ser No. 83 ) 293 Tube Injector ( 5271935 ) ( Ser No. 83 ) 294 Sensors, Pr. ( 2 To 10 Bar ) ( 4911882 ) ( Ser No. 83 ) 295 Sensors ( Temperature ) ( 4911877 ) ( Ser No. 83 ) 296 Pump, Sea Water ( 4963510 ) ( Ser No. 83 ) 297 Seal Oil ( 3942535 ) ( Ser No. 83 ) 298 Seal Oil ( 5259499 ) ( Ser No. 83 ) 299 Seal Injector ( 3909886 ) ( Ser No. 83 ) 300 Gasket Exhaust ( 3932063 ) ( Ser No. 83 ) 301 Gasket Gear , H ( 3944293 ) ( Ser No. 83 ) 302 Gasket Cover ( 3939258 ) ( Ser No. 83 ) 303 Gasket Hydraulic ( 3940245 ) ( Ser No. 83 ) 304 Gasket Cylinder ( 3938267 ) ( Ser No. 83 ) 305 Washers Lock ( 611 ) ( Ser No. 83 ) 306 Screw Hex, Flange ( 3243948 ) ( Ser No. 83 ) 307 Plug Pipe ( S911b ) ( Ser No. 83 ) 308 Hardness Wiring ( 3875359 ) ( Ser No. 83 ) 309 Control Governor ( 3974704 ) ( Ser No. 83 ) 310 Washer Plain ( 640 ) ( Ser No. 83 ) 311 Nut Heavy Hex ( 204 ) ( Ser No. 83 ) 312 Screw Haxagon ( 112C ) ( Ser No. 83 ) 313 Washers Plain ( S602 ) ( Ser No. 83 ) 314 Washers Lock ( 604 ) ( Ser No. 83 ) 315 Clamp Hose ( 43828 ) ( Ser No. 83 ) 316 Brace, Tube ( 101470 ) ( Ser No. 83 ) 317 Clip ( 107460 ) ( Ser No. 83 ) 318 Screw Hexagon ( 109 ) ( Ser No. 83 ) 319 Connection Ex ( 3814793 ) ( Ser No. 83 ) 320 Flange, Weld ( 3226087 ) ( Ser No. 83 ) 321 Clip ( 500694 ) ( Ser No. 83 ) 322 Screw Hexagon 112C ) ( Ser No. 83 ) 323 Screw Hexagon ( 1137 ) ( Ser No. 83 ) 324 Nut Hex Heavy ( 204 ) ( Ser No. 83 ) 325 Nut Hex Heavy ( 203 ) ( Ser No. 83 ) 326 Washers Lock ( 604 ) ( Ser No. 83 ) 327 Washers Lock ( 611 ) ( Ser No. 83 ) 328 Washers Plain ( 640 ) ( Ser No. 83 ) 329 Gasket Exhaust Ou 2880039 ) ( Ser No. 83 ) 330 Gasket Dia 135 Pcd 115 Dia ( 3940245 ) ( Ser No. 83 ) 331 Washer Plain ( 640 ) ( Ser No. 83 ) 332 Connection Se ( 2867840 ) ( Ser No. 83 ) 333 Connection Se ( 2867838 ) ( Ser No. 83 ) 334 Tools :-½ Breaker Bar-15’’ Long ( Ser No. 83 ) 335 Procurement Of Following Spares Of Voith Turbo Schneider Propulsion Type Vsp 28R5 / 234-2Ae45 Kw Rpm ( Mandatory Spares ) :- Shaft Seal Ring Adck-300X340x16 ( H01.067195 ) ( Ser No. 84 ) 336 Round Cord Ring V-420X4.5Nbr70 ( H01.086366 ) ( Ser No. 84 ) 337 O - Ring 560X5 Nbr70 ( H01.032840 ) ( Ser No. 84 ) 338 O- Ring 454X8 Nbr 70 ( H01.064102 ) ( Ser No. 84 ) 339 Bulb Lamp 35X18.5-24V 5W ( H01.095322 ) ( Ser No. 84 ) 340 Filter Element Hydac 12782361300R020 ( H01.016221 ) ( Ser No. 84 ) 341 Repair Kit ( H01.012435 ) ( Ser No. 84 ) 342 Alfa Laval Fuel Oil Centrifuge:- Major Service Kit - 546670-07-08 343 Ows Make-Suyash, Modle-Sd0.5:- Cover Gasket ( 8320025002 ) ( Ser No 86 ) 344 Coaleser Element ( 2704002501 ) ( Ser No 86 ) 345 Sacrificial Anode ( 6453020001 ) ( Ser No 86 ) 346 Set Stuffing Box-Packing ( 546040207Ep1 ) ( Ser No 86 ) 347 Desicator Cartridge ( 51110Em027 ) ( Ser No 86 ) 348 Reciprocating Air Compressors Make Elgi ( Model Hp 10 300 ) :- V Belt ( 000905283 ) ( Ser No 87 ) 349 Inlet Air Filter ( 022100929 ) ( Ser No 87 ) 350 Gasket Free End Civer ( 020365450 ) ( Ser No 87 ) 351 Gasket Fly End ( 000425510 ) ( Ser No 87 ) 352 Gasket Valve Flate ( 000411530 ) ( Ser No 87 ) 353 Valve Finger Type ( 0003300950 ) ( Ser No 87 ) 354 Valve Finger Type ( 000330970 ) ( Ser No 87 ) 355 Gasket ( 0001004A ) ( Ser No 87 ) 356 Anchor Windlass:- Packing For Top Cover ( 02211-6235-1015 ) ( Ser No. 19 ) 357 Friction Lining For Slipping Clutch ( 02-18-6232-Sc-875240 ) ( Ser No. 19 ) 358 Spring For Slipping Clutch ( 02-18-6232-Sc-875270 ) ( Ser No. 19 ) 359 Rivets For Friction Lining ( 02-18-6232-Sc-875 ) ( Ser No. 19 ) 360 Friction Lining For Emb ( B-Emb-2451-B-3024 ) ( Ser No. 19 ) 361 Rivets For Friction Lining ( A-Emb-1900-180-3092 ) ( Ser No. 19 ) 362 Spring For Emb ( B-Emb-2451-B-3017 ) ( Ser No. 19 ) 363 Procurement Of Following Maintenance Free Lead Acid Batteries ( A ) 120 Ah - 12 Nos ( Ser No. 19 ) 364 ( B ) 150 Ah - 12 Nos ( Ser No. 19 ) 365 ( C ) 180 Ah - 12 Nos ( Ser No. 19 ) 366 ( D ) 200 Ah - 10 Nos ( Ser No. 19 ) 367 Fuse ( 0219-6232-9000-F1-F10 ) ( Ser No. 19 ) 368 Indication Lamp ( 02-19-6232-9000-H1-H2 ) ( Ser No. 19 ) 369 Service Charge For Third Party Inspection ( For Hull Survey And Qc )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Karnataka View Result →
35.
Defence #8672737 AOC
REPAIR/MAINT OF PUMP SETS, MOTORS, WATER FILTERATION PLANT, CHLORINE DOZING SYSTEM, RO PLANT, AND ITS ALLIED WORKS AT PROTHRAPUR FILTERATION PLANT, RWH, CHOULDHARI DAM,NTS, NAD MARCOS, PORT MOUNT UNDER AGE EM-II OF GE MINNIEBAY, SRI VIJAYA PURAM; 1 Supply, layig, testing and commissioning in replacement of ERW NB MS pipes of size 150mm dia, ISI marked grade 8 mm thick as per IS : 3589 grade 330 suitable for welded joints and flanged joints including fabricating tailor made as per site requirement including painting with two coats of anticorrosive paint complete all as specified ad as directed.Make : Jindal, Allied Pipes, after bailingout water from existing semi UG sump of Cap.150000 Gallons with Appx. 7 Mtr.depth at porthrapur filtration Plant and other places as directed by Engr-in-charge. 2 M&L in replacement for tyton joints of 200/350/400 mm dia using rubber gasket ISI marked suitable for spigot and socket pipes and fittings for CI / DI all as specified and directed. 3 Supply & fixing in replacement of Mechanical joint of size 250/350mm borewithbolts, nuts, washers for pipe line leakages complete all as specified and as directed by Engineer-in-Charge. 4 Supply & fixing in replacement of Mechanical joint of size 400mm borewithbolts, nuts, washers for pipe line leakages complete all as specified and as directed by Engineer-in-Charge. 5 M& L for spray painting with synthetic enamel paint on old painted surfaces of pumps,motors, sluice valve ,NRV & other machineries including necessary preparation of surfacesfor each job at Chouldari dam pump house, Porthrapur filteration plant, NTS Pump house including using white paint for letter writing of existing SM/MES No complete all as specified and as directed by Engineer-in-Charge. 6 M&L for attending repairing of pipeline of size 200 to 400 mm bore through caulking / welding execavation and earthwork in mud/soil by using labour to a length of 1 m approx (from chouldari to minniebay pump house) and depth upto 1 Mtr and forming bund with excavated Hard / soft soil to avoid sea/raw water entering into the working area including pumping/ bailing out water by using portable diesel engine driven pumpset complete all as directed and including the following:- (i) Cutting of CI/DI pipe of sixe upto 400/350/300/250/200 mm dia after through inspection for the damage incl bailing out water using portable pumpset. 7 Supply and laying in replacement submersible flat cable PVC insulated and screened PVC beddedgalvanised steel strip or wire armoured electric power cable (Heavy duty) LT UG cable with stranded copper conductor for 1100 volts grade of 10 sqmm 3 corein trenches or passing through pipe complete in all respects to the entire satisfaction of Engineer-in-Charge. 8 Supply and fixing in replacement of reducer eccentric type 200 x 150 mm heavy duty, pressure rating2A PN 16 bar, including nut bolts, washer andgaskete for suitable size complete all as specified and directed by Engineer-in-Charge. 9 Material and labour in repair, Composition, Supply & Installation of 4 inch thick ACP Box of size 10 feet x 3 feet with MS pipe structure fix inside with 3 mm Acrylic sheet with digitally printed 3m backlite Vinyl on HP Latex Printer, Display both side, LED modules complete upto 100 letters as specified size directed by Engineer-in-Charge with Andaman & Nicobar command and MES logo fixed with four nos of MS pipe Heavy duty 50 mm bore up to 6m height by nuts/bolts and welding as required at site, spray painting with two coat synthetic enamel paint comlete Mild Steel pipe including necessary excavation and PCC work for foundation complete all as specified and direced by Engineer-in-Charge 10 M&L for attending break down, execavation and earthwork in mud/soil by using earthmoving machinery (Hitachi)/labour to a length of 10 m approx (from chouldhari to Minniebay Pump House) and depth upto 3 Mtr and forming bund with excavated Hard/soft soil to avoid sea/raw water entering into the working area including pumping/bailing out water by using portable diesel engine driven pumpset complete all as directed and including the following :-(i) Cutting of CI/DI pipe of size upto 500/400/350/300 mm dia after thorough inspection for the damage incl bailing out water using portable pumpset.(ii) Taking out CI/DI pipe after removing from tyton joints at both ends with the help of Hitachi and keeping aside for further disposal.(iii) Transporting CI/DI pipe of size upto 500/400/350/300 mm dia to the site from Chouldhari dam or any area as directed by Engr-in-Charge, cutting the pipe into two pieces as per requirement and laying into the trenches using machinery.(iv) Jointing by using rubber tyton rings upto 500/400/350/300mm dia pipe to the corresponding socket and spigot ends of the existing pipeline after aligning the pipe line as per site condition, inserting the CI collar of size 500/400/350/300 mm dia complete all as directed.(v) CI/DI special will be measure separately in respective item 11 Note :- (i) The contractor shall provide team comprising of pipe fitter and an assistant for cutting and re-jointing with existing pipe line all as per direction of Engineer-in-charge. The cost for the above items including all type of tools and plants / any type of vehicle / earth moving plant / hitchi / JCB as required at site is deemed to be included in unit rate quoted for above items. (ii) The contractor shall take due care while executing the work (i.e non damage of electrical cable, telephone cable, water supply pipe line etc) during execution of work if any fault / cutting occurred shall carry out repair immediately and cost of the same shall deemed to be included in quoted rates. (iii) During execution of work if any liaison required for laying of pipe at site, from civil Administative department, local people gram panchayat, police station etc are the sole responsiblity for contractor. The contractor shall not claim and financial liabilities on this matter on bills. (iv) The cost of necessary encasing of pipe in culvert shall deemed to be included in this quoted rate all as specified and directed by Engr-in-Charge. 12 All as per Item No.10.00 above but depth above 3 Mtr all as directed by Engineer in ChargeNote : (i) The rate is deemed to include cost towards tools and plants and transportation required for attending the repair work. (ii) The rate deemed to inclusives of soil additional required to refilling/ making bunds to prevent sea water entering into the work place complete.(iii) The cost of pipes, specials, Tyton/lead joints shall be measured and paid seperatelyunder relevent item of this schedule. 13 M&L for detecting and repairing leakage in CI/DI pipe lines of size 250/200 mmbore, taking up unserviceable /serviceable CI/DI water main with spigot and socket ends (including fittings) of any type/grade and joints from trenches and layingnew CI/DI pipe lines of size 300 mm bore in trenches or placing on existion pillers /supports as directed to perform the following activities :-(a) Execution and earth work in soil / mud by using machinery/labour to suitable length (Appx 10 mtrs) and forming bund with excavated soil to avoid sea / row water entering into the working area including pumping/bailing out water by using portable desal engine driven pump set. (b) Cutting of CI / DI pipe of size 200 mm bore after through inspetion for the damaged pipe line including disconnecting / dismentling.(c ) Taking out CI/DI pipewith CI/DI specials after removing from joints/burning out joints and removing lead at both ends with the help of hydrolic crane other machinery and keeping aside fr further disposal.(d) Cutting of new pipe into pieces as per rquirement and laying using machinery.( e) Alinging the pipe line as per sie condition, in setting theCollar suitable for 200 mm CI/DI pipe.(f) Attending repair work within the minimum time frame/period as specified by Engr - in - charge. 14 Notes for the Itemsi) The unit rate is deemed to include cost of tools and plants and transprtation required for attending the repair work.ii)Supply only CI/DI pipe shall be measured & paid for seperately under relevant item of this schedule.iii) Extra soil required for refilling /making bunds to prevent water entering into the work place shall be deemed to include in the unit rate.iv) Specials / rubber or fiber/ lead joints shal be measured and paid for seperately under relevent items of this schedule.v) Old unsv CI/DI pipes, fittings, lead, nuts, bolts, washer, gaskets etc. shall become contractors property and necessary recovery as per schedule of credit shall be deducted from contractor.(vi) The contractor shall take due care while executing the work (i.e non damage of electrical cable, telephone cable, water supply pipe line etc) during execution of work if any fault / cutting occurred shall carry out repair immediately and cost of the same shall deemed to be included in quoted rates. (vii) During execution of work if any liaison required for laying of pipe at site, from civil Administative department, local people gram panchayat, police station etc are the sole responsiblity for contractor. The contractor shall not claim and financial liabilities on this matter on bills. 15 All as per item No:12.00 here-in - before but for CI/DI pipe line of size 80/100/150mm 16 M&L for attending of water supply complaints for any leakage/blockage in GI /CPVC/PPR pipe lines of size 20mm/25mm bore taking up serviceable / unserviceable GI water pipe lines all fitings/fixtures from trench including supply and laying GI / CPVC/PPR tubing 20mm/25mm bore up to 1 mtr length (max) including necessary cutting, threading and replacement of unserviceable GI/CPVC/PPR fittings such as GI/CPVC/PPR socket /Nipple/union socket, Tee, Tee reducer etc. of size 20mm/25mm including necessary excavation and earth work upto 1 mtr length to repair the leakage/clearing the blockage in the pipe line and testing on completion. (Replacement of unserviceable GI fittingssuch as GI socket /Nipple/union socket/Tee/Tee reducer etc. shall be measured and paid for separately under relevant items of this schedule here-in-after) 17 All as per item No 14.00 here-in- before but of size 40/50/80/100mm bore GI pipe line and -do- 18 All as per item No 14.00 here-in-before but in GI /CPVC pipe lines on wall/floor/roof of the bldg (20/25/40/50mm) 19 All as per item No 14.00 here-in-before but in GI /CPVC pipe lines on wall/floor/roof of the bldg. (80/100m) 20 Taking up or down old/chocked water tubing of CPVC pipes of size 20/25/50/80/100 mm bore with fittings from trenchs/walls cleaning for refixing in new or old position or credit to contractor all as specified and as directed. 21 Supply and fix in replacement of 20mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed. 22 Supply and fix in replacement of 25mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed. 23 Supply and fix in replacement of 50mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed. 24 Supply and Fix in replacemet of CPVC Union suitable for 25 mm CPVC pipe complete all as specified and directed 25 Supply and Fix in replacement of CPVC Union suitable for 50 mm CPVC pipe complete all as specified and directed 26 Supply and Fix in replacement of CPVC ball valve suitable for 25 mm CPVC pipe complete all as specified and directed 27 Supply and Fixin replacement of CPVC ball valvesuitable for 50 mm CPVC pipe complete all as specified and directed 28 S&F in replacement tubes medium grade galvanized iron pipes of following size with all fittings laid in trenches/fixed on wall/on roof etc including taking down of old rusted pipe of as under:- 29 (a)20mm dia 30 (b)25mm dia 31 (c)40mm dia 32 (d)50mm dia 33 (e)80mm dia 34 (f)100mm dia 35 S&F 3- layer PP-R Polypropylene random copolymer) concea end pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches in following sizes:- 36 (a) 32 mm dia 37 (b) 40mm dia 38 (c) 50mm dia 39 (d) 90 mm dia 40 M&L for DI pipes with spigot and socket ends/flange type as required on site, Taking up unserviceable CI/DI Water Mains ( including fittings) with spigot and socket ends and lead joints from trench of any type/grade including burning out of joints and recovering lead complete all as specified and as directed by Engineer-in-Charge of the following sizes :-:-(i) The contractor shall take due care while executing the work (i.e non damage of electrical cable, telephone cable, water supply pipe line etc) during execution of work if any fault / cutting occurred shall carry out repair immediately and cost of the same shall deemed to be included in quoted rates. (ii) During execution of work if any liaison required for laying of pipe at site, from civil Administative department, local people gram panchayat, police station etc are the sole responsiblity for contractor. The contractor shall not claim and financial liabilities on this matter on bills. 41 (a) 100mm bore 42 (b) 150 mm bore 43 (c) 200mm bore 44 (d) 250 mm bore 45 (e) 350 mm bore 46 (f) 400 mm bore 47 M&L for Painting to GI / CI/DI water pipe line including Sluice Valves,valve chambers, NRV etcwith two coat of synthetic enamel paint of black colour/shade or approved colour duly preparing the existing painted surfacesto the entire satisfaction of Engineer in charge of following dia of pipes :- 48 (a) 80/100/150 mm Dia 49 (b) 200/250 mm Dia 50 (c) 350/400 mm Dia 51 S&F in repairs safety instruction/pump motor details display notice board for water supply installation made out of acrylic board in rectangle shape with heavy duty aluminium frame of size 0.5mtr x.75 mtr with details of pump/motor using letters as given and directed by Engineer-in-Charge and screwing the same on the wall properly complete all as specified and as directed by Engineer-in-Charge. 52 Material and labour for heavy duty rubberised Hose pipe dia of 350 mm with MS flange type in black colour, high quality synthetic rubber bend resistant to abrasion,high tensile synthetic textile cord, working pressure 25 bar all as per IS 13070-1991 specification including taking up unserviceable old existing pipe all as specified and directed by Engineer-in-charge. 53 Supply and fixing in replacement Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed of the following sizes :- 54 (a) 20 mm bore 55 (b) 25 mm bore 56 (c) 40 mm bore 57 (d) 50 mm bore 58 (e) 80 mm bore 59 Supply and fix in replacement cast iron sluice valve ISI marked class PN 1.6 heavy duty ISI marked both ends flanged, suitable for following bore conforming to IS 14846 of 2000 duly with wheel operated handle with high tensile stainless steel spindle including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and making arrangement for safe working complete all as specified and as directed by Engineer-in-Charge. 60 (a) 100mm bore 61 (b) 150mm bore 62 (c) 200/250 mm bore 63 (d) 350/400 mm dia bore 64 (e) 500mm dia bore 65 M&L for repairing and Servicing of Sluice valve by removing the nut and taking out spindle for turning in Lathe workshop replacement of necessary spare parts and refix at original position after service complete all as specified and directed for the following sizes:- 66 (a) 100/150/200/250 mm dia bore 67 (b) 350/400 mm dia bore 68 Supply and fix in replacement flangedNon return valve flap type, cast iron body, PN1.6,confirming with IS provision of 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete including dismantling of unserviceable valve all as directed of following sizes:- 69 (a) 100/150 mm dia bore 70 (b) 200/250 mm dia bore 71 Repairs to existing 100/150 mm bore Air release valve by remvoing the valve and repairing the same by replacing gaskes,nut,bolts, top cover and ball refixing the same, cast iron body, on both sides of the flanges, bolts and nuts complete all as specified and directed. 72 Supply and fix in replacement of air release valve suitable for 80/100 mm dia pipe all as specified and directed. 73 S&F in replacement, Cast Iron foot valve ball type of size 150mm, heavy duty confirming to relevant ISfixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump all as specified and as directed. Make : Normax,Kirlosker or equivqlent. 74 S&F in replacement, Cast Iron foot valve ball type of size 200mm, heavy duty confirming to relevant ISfixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump all as specified and as directed. Make : Normax,Kirlosker or equivqlent. 75 S&F in replacement, Cast Iron foot valve ball type of size 250mm, heavy duty confirming to relevant ISfixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump all as specified and as directed. Make : Normax,Kirlosker or equivqlent. 76 S&F in replacement of Gun Metal Foot valve 50/80 mm bore complete all as specified and as directed by Engr-in-Charge. 77 S&F in replacement of Butter fly valve Flange type suitable for 200/250mm bore with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-13095 complete including dismantling of unserviceable valve all as directed. 78 S&F in replacement of Butter fly valve Flange type suitable for 150mm bore with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-13095 complete including dismantling of unserviceable valve all as directed. 79 S&F in replacement of CI/DI Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.)Tee pieces single branch.Y junction, double branch, cross (all sockets or socket and spigot or flanged) collars, caps and plugs upto 400 mm boreISI Marked all as specified and directed by Engr-in-Charge 80 S&F in replacement joint with rubber or fiber board gasket (flange joints) suitable for flanged pipes and fittingsof thefollowing sizes :- 81 (a)80mm bore 82 (b) 100mm bore 83 (c ) 150mm bore 84 S&F Gland packing 12.5mm/10mm dia / thickMake Champion / equivalent for sluice valve / pumps, leakage rectification. 85 Supply and fix nuts,bolts, washers for valves and pump sets of various grade as required. 86 Supply only TDS/chlorine test for pump house to check TDS valve as per directed. 87 Supply only Orthotodiline chemicalsolution for Chlorine checking as per directed. 88 S&F in replacement rubber (star) coupling of existing size for suitable 40HP/50HP/60/125/165/170HP pump set all as specified and directed at site by engr-in-charge. 89 M & L in replacement of MS coupling with rubber( spider type) L-276 or required on site of existingpump suitable for 60/165 /125/100 Hp pump sets complete all as specified and as directed. 90 S & F in replacement insulation rubber mat of size 1x2 mtr in black colour, 19 mm thick confirming to IS 15652/IE 61111 of suitable size all as specified and directed to the entire satisfaction of Engr-in-charge. 91 Repair/ Maint of masonry pit of existing size (internal) for sluice valves with sub PCC block wallstraight or curvedradius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 3 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangements, hold fasts and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all asincluding demolition of existing broken valve pit chamber complete in all respects to the entire satisfaction of Engr-in-Charge Note : MS sheet will be measured and paid seperately under relevant item of the schedule. 92 Material and labour for construction of block masonry valve pit of size 60 cm x 60 cm x 60 cm (internal dimensions) with one brick thick wall in cement mortar (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded agrregate) as in foundation, 15 mm thick rendering in cement mortar (1:4) internally and externally upto 15 cm below ground level including, provision of valve pit cover made out of 3 mm thick MS sheet welded with 40 x 5 mm thick flat iron all round, on ISA 40 x 40 x 6 mm frame, fixed with hold fast 150 mm long, emebedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100 mm) with necessary hinges, handles, locking arrangement, including applying two coats of white wash on plastered surfaces and two coats of dituminious paint over a coat of red oxide primer on steel surfaces and necessary earth work in soft/ loose soil & demolition of old unserviceable valve chamber complete all as specified and as directed by Engineer-in-Charge. 93 Material and labour for construction of block masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimensions) with one brick thick wall in cement mortar (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded agrregate) as in foundation, 15 mm thick rendering in cement mortar (1:4) internally and externally upto 15 cm below ground level including, provision of valve pit cover made out of 3 mm thick MS sheet welded with 40 x 5 mm thick flat iron all round, on ISA 40 x 40 x 6 mm frame, fixed with hold fast 150 mm long, emebedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100 mm) with necessary hinges, handles, locking arrangement, including applying two coats of white wash on plastered surfaces and two coats of dituminious paint over a coat of red oxide primer on steel surfaces and necessary earth work in soft/ loose soil & demolition of old unserviceable valve chamber complete all as specified and as directed by Engineer-in-Charge. 94 Excavating in trenches in soft / loose soil, n.exc 1.5m wide and n.exc 1.5m in depth: for foundation, etc. Or for shafts, wells, cessapits, manholes, pier holes, etc. n.exc10 Sq.m on plan and in.exc 1.5m in depth and getting out all as specified and directed by Engr-in-Charge 95 Excavating in trenches in hard / dense soil, n.exc 1.5m wide and n.exc 1.5m in depth: for foundation, etc. Or for shafts, wells, cessapits, manholes, pier holes, etc. n.exc10 Sq.m on plan and in.exc 1.5m in depth and getting out all as specified and directed by Engr-in-Charge 96 Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc.25cm in any type of soil all as specified and as directed. 97 Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point in any type of soil getting out all as specified and as directed by engr-in-charge. 98 M & L for precast cement concrete 1:2:4 type B2 using 40 mm graded stone aggregates as in mass concrete/foundation/for supporting (encasing) of DI pipes of any size and in any position including plastering of surfaces complete all as specified and directed. 99 M & L for precast cement concrete1:3:6 type B1 using 20 mm graded stone aggregates as in mass concrete/foundation/for supporting (encasing) of DI pipes of any size and in any position including plastering of surfaces complete all as specified and directed. 100 M&L for testing of water samples and obtain the test result for the parametrsas per IS 10500 like TDS,Colour,odour,TSS,PH,coliform turbidity,etc by carrying physical,chemical,microbiology examiniationfrom any govt authoarised /NABL approved laboratary complete all as specified and as directed by Engr-in-Charge. Note :(i) Source/location of water samples shall be decided by the Engineer-In-Charge. (ii) Test test report shall be submitted by the contractor along with RAR/FB for payment of this item 101 M&L in replacement for MS sheet (3.15)mm thick) for valve chamber cover/cable duct cover with plates of Fe 410W, Gde E-250, quality -A(Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment for locking arrangements complete including painting with two coat of synthetic enamel paint black colour/shade over a coat of red oxide primer complete all as specified and directed by Engineer - in - Charge. 102 S & F in replacement Fe410 W (Gde E-250) quality A for chamber ,RCC tank and heavy bracket framing ( Beam,tee, angle channel or flat section) including distance pieces, clests etc. complete including painting with two coat of synthetic enamel paint black colour/shade over a coat of red oxide primer complete all as specified and directed by Engineer - in - Charge. 103 M&L for fabrication of MS channel baseof existing size and grade made out of Steel channel MC75,MC100 &MC125 (As per existing dimensions) for pump and motor capacity 100 HP / 125 HP as mentioned against item including necessary cutting, welding, grinding etc., and fixing the same on newly provided PCC foundation, foundation bolt etc., as per manufacturer recommendations to ensure proper alingment of both pump and motor complete, carry out painting the complete base plate with two coat of synthetic enamel paint Black shade / colour over a coat of Red oxide primer complete all as specified and as directed by Engineer-in-charge. 104 Takng down old unservicable cable and Supply and Laying in replacement ofXLPE insulated, screened, PVC bedded, galvanised steel strip or wire unarmoured, electric power cables (heavyduty) with Copper conductor, 1100 volts Earthed, 3 Core, grade cross sectional area 25 sqmm as specified and directed. 105 S&F in replacement Fully automatic star-Delta starter suitable for 30/40/50/60HP Motor of centrifugal pump including voltmeter, Ammeter, Indicator, OL protector, SP preventer, relay if required on site complete with suitable factory made sheet enclosure of complete all as specified and as directed by engineer-in-charge. 106 S&F in replacement Fully automatic star-Delta starter suitable for 125/170HP Motor of centrifugal pump including voltmeter, Ammeter, Indicator, OL protector, SP preventer, relay if required on site complete with suitable factory made sheet enclosure of complete all as specified and as directed by engineer-in-charge. 107 S & F in repair for DOL startor of capacity upto 10 HP motor fully automatic type complete all as specified and as directed. 108 S & F in repair for DOL startor of capacity upto 20 HP motor fully automatic type complete all as specified and as directed. 109 Supply and fix in repalcement of Contactor 3 pole 415 volts upto 95 Ampsadjustable type(control voltage 415 as per existing model.) all as specified and directed. 110 Supply and fix in repalcement of Contactor 3 pole 415 volts for motor upto capacity 170 Amps (control voltage 415 as per existing model.) all as specified and directed. 111 Supply and fix in repalcement of over load relay for 30/40/50/60/125/170 Hp motor (control voltage 415 as per existing model.) all as specified and directed. 112 Supply and fix in repalcement of connector for motor of capacity upto 170 HP (control voltage 415 as per existing model.) all as specified and directed. 113 M & L for repair/maintenance ofback side cover of motor of capacity 30/40/50/ 60/125/170 HPas per existing model. all as specified and directed. 114 M & L for replacement of ball bearings of reduction gear box of lime/flash mixture and alum dosing unit at Prothrapur filteration plant complete all as specified and as directed. Make: SKF or as per site requirement as approved by GE 115 M & L for replacement of ball bearings of reduction gear box of clarifloculator bridge motor at Prothrapur filteration plant complete all as specified and as directed.Make: SKF or as per site requirement as approved by GE 116 M & L in replacement lugs upto 35 sqmm, copper conductor suitable for all 40HP/50HP/60HP as specified and directed by Engr in charger at site. 117 M&L for repair / maintenance to Decrin dozing pump including replacement of UNSV spare parts Rotor assy with bearings bracket, Pump tube,Injection check valve 3/8,Weighted suction line strainer 3/8,Connecting nut 3/8 with adopter,Ferrule 1/4 etc which will required on site and testing on completion for its smooth functioning to the entire satisfaction of Engr-in-Charge. 118 Supply, install, test and commissioning Altoch Gp Chlorine dosing system made up of non metallic thermoplastic with solution tank of capacity 100 Ltr to be fixed in 150/250/200mm bore CI/DI pipe line with following accessories:-(i) Dosing pump 230V, 50 Hz(ii) Agitator(iii) Water Intet / outlet regulator(iv) Overflow vent(v) Drain valve(vi) Fluid level controllerNote : The quoted rate includes all other accessories for operation of dosing system. 119 M&L Repair/Maint / Disconnecting electrical connection of pump set of capacity 1 HP to 7.5 HP and taking out complete assembly with electric motor and testing the complete and refixing with new, nuts, bolts & washers and fitting the sameafter the following repairs as mentioned here in after all as directed by Engr- in Charge. 120 Attending breakdown for pump/motor i.e minor repair (Changing of gand,nut bolt,connector etc) ,Panels/MCCB/Changeover Switch to check and locate / detect fault related to breakdown complete all as directed by Engineer-in-charge.Note:- (a) Spares will be measured and paid separately under relavant items. (b)The break down complaint should be attended within 2 hours with the intimation of Engr-in-charge or concern JE E/M by telephonically / verbally. 121 M&L Repair/Maint/servicing to Twin lobe Compressor unit single Phase,240 Volts 50 Hz, Type- SP-IH, Head 9 to 18 Meter,2800 RPM, used for back washing of filteration plant including oiling/greasing & provn of gland packing etc. and replacement of unserviceable parts for its smooth functioning to the entire satisfaction of Engr-in-Charge. 122 M&L Repair/Maint /Disconnecting electrical connection of Centrifugal pump set of capacity 50HP/60/125/165/170 HP and taking out complete assembly with electric motor, testing the complete and refixing with new, nuts, bolts,bearings, & washers and fitting the sameafter therepairs as mentioned here in after all as directed by Engr- in Charge. 123 S&F ,testing and commisioning in replacement of Alum/lime dosing pump reciprocating , mechanicaly actuated diaphragm type for dosing of liquid products.Pump capacity upto 1.5 HP, 440 Volts AC 1440 RPM motor/existing capacity as required on site of filteration plant complete with 100 ltrs per hour capacity or existing capacity of site inluding indicator and agitaor (1280 rpm) all as per direction of Engr-in-Charge 124 Dismantling and taking out the existing mono block / centrifugal/ Submersible type pump set, by disconnecting suction and delivery pipe lines of pump set, separate the motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class B insulation keeping for drying, connecting electricconnection, testing and commissioning to itssatisfactory of Engr-in-Charge complete all as directed for the following capacity :- 125 (a) 100/125 HP pump set. 126 (b) 165/170HP pump set. 127 Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 7.5 HP capacity, pump set overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paintincluding preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge 128 Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 10/15/20 HP capacity, pump set overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paintincluding preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge 129 Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 30/40 HP capacity, pump set overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paintincluding preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge 130 Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 50/60 HP capacity, pump set overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paintincluding preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge 131 Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set of Capacity Upto 7.5 HP Pump set, by disconnecting suction and delivery pipe linesof pump set , separatethe motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class B insulation keeping for drying, connecting electricconnection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed. 132 Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set of Capacity 1015/20 HP Pump set, by disconnecting suction and delivery pipe linesof pump set , separatethe motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class B insulation keeping for drying, connecting electricconnection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed. 133 Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set of Capacity 30/40 HP Pump set, by disconnecting suction and delivery pipe linesof pump set , separatethe motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class B insulation keeping for drying, connecting electricconnection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed. 134 Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set of Capacity 50/60 HP Pump set, by disconnecting suction and delivery pipe linesof pump set , separatethe motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class B insulation keeping for drying, connecting electricconnection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed. 135 M&L Graphite gland packing, suitable for sluice valves or pump sets, fixed in position including taking down unserviceable gland packing as per site requirement etc complete all as specified and as directed by Engineer-in-Charge. 136 Supply and fix in replacement of pressure gauge suitable for 125HP/100HP pump of pressure 0-150 Kg/Sq CM rating for suction pipe/ Discharge pipe complete with connected pipe and stop cock of suitable size complete all as specified and as directed by Engineer-in-Charge. 137 Supply and fix in replacement ofpressure gauge suitable for 165HP/170HP pump of pressure 0-250 Kg/Sq CM rating for suction pipe/ Discharge pipe complete with connected pipe and stop cock of suitable size complete all as specified and as directed by Engineer-in-Charge. 138 Supply only 125HP/165HP/132KWpump impellor Gun metal model No. UP 150/45- 29 part , impellor part code No. 15900 complete all as specified and as directed by Engineer-in-Charge. 139 M&L for taking out existing centrifugal pump of capacity 170/ 165 Hp for servicing ( as per manufacturer instructions) by disconnecting motor and pump set, pipe line and removing of all parts like bearing, bushes, impeller, shaft etc cleaning all rusted surfaces and scales formed inside/out side pumpset etc cleaning, oiling, greasing at proper places and re-fixing with oil paper packingin position, duly aligned with motor with all serviceable partsincluding painting with one coat of anti corrosive paint over red oxide primer and writing MES /SM No and testing and commissioningcomplete all as specified and as directed by Engineer-in-Charge.Notes: i) Item requires replacement if found unserviceable then the same be replaced & measured and paid separately.ii) Spares will be measured and paid seperately. 140 M&L for taking out existing centrifugal pump of capacity 125/ 100 Hp for servicing ( as per manufacturer instructions) by disconnecting motor and pump set, pipe line and removing of all parts like bearing, bushes, impeller, shaft etc cleaning all rusted surfaces and scales formed inside/out side pumpset etc cleaning, oiling, greasing at proper places and re-fixing with oil paper packingin position, duly aligned with motor with all serviceable partsincluding painting with one coat of anti corrosive paint over red oxide primer and writing MES /SM No and testing and commissioningcomplete all as specified and as directed by Engineer-in-Charge.Notes: i) Item requires replacement if found unserviceable then the same be replaced & measured and paid separately.ii) Spares will be measured and paid seperately. 141 M&L for Cleaning of RCC Semi underground drainage sump of appx size 50MtrX40Mtr and depth appx 6 Mtr situated by emptying the reservoirs, taking down the scale / sludge /mud / algae formed by JCB or manually including and other foreign materials got deposited on side of walls and bottom of the tanks by scrapping and brushing with wire brush, cleaning with pressure pump, washing with bleaching powder slurry and allowing to dry and then washing and cleaning the tank with fresh water including applying two coat of white wash on internal surface of reservoirs/sumps and written details on tanks like date of cleaning, capacity of tanks etc on the out side of the tankwith synthetic enamel paint with letter size 20cm high, 10cm width in white colour, over a black background of size 120 x 80cm all as specified and directed by Engr-in-Charge. 142 Suppy, installing, testing and commissioning 10 HP horizontal submersible Pump set at rated voltage 415V, 3 Phase 50Hz AC suppy , discharge @ 32 LPS at 30 mtr head,size 100x100mm, supply and installation complete including 60 Metre long submersible water proof 10 Sqmm 3 core cable,submersible pump shall be protected with metal cageing complete all as specified and directed by Engineer-in Charge.Make : Kirloskar/Crompton Greaves or equivalent.Model:- KOS-1030+ equivalent model in Greaves or equivalent. 143 Supply only stainless steel shaft as per sample for pumpset of capacity 170/165 HP complete all as specified and as directed by Engineer-in-Charge. 144 Supply only stainless steel shaft as per samplefor pumpset of capacity 125/100 HP complete all as specified and as directed by Engineer-in-Charge. 145 Supply only in replacement shaft sleeves of model No-UP150/45 with check nuts (Br) for 170/ 165 HP pump set complete all as specified and as directed by Engineer-in-Charge. 146 Supply only in replacement shaft shaft sleeves of with check nuts (Br) for 125/100 HP pump setModel DSM 125/40 complete all as specified and as directed by Engineer-in-Charge. 147 M & L inreplacement of old connection of Alum/ Lime dosing and providing new connection with CPVC pipe of dia 25mm /50mm and CPVC ball vale,SS bucket for lime doser as required on site,painting of old lime doser iron part , with cutting of wall/PCC which is required,plastering of broken part if required and two coatpaint with distemper of alum/lime dosing plant of existing colour all as specified and directed by Engineer-in-Charge. 148 Supply only ball bearingfor centrifugal pump of capacity 100/125/165/170 HP complete all as specified and as directed by Engineer-in-Charge. 149 S&F in repair MCCB 4 Pole, 415 V,250 Amps with breaking capacity 36 KA.Adjustable type. complete all as directed. 150 M&L to carry out periodical repair / maint of RO filtration plant of capacity 1000 ltrs per hour for its smooth functioning comprising the following equipments / plants including replacement of filter media, carbon media, membrane and micro filter etc including cleaning of 04 Nos PVC service tanks of 5000 ltr capacity each, and testing on completion for leakage to the entire satisfaction of Engr-in-Charge all as specified and directed Note:- The cost of parts / items to be replaced shall be measured and paid for separately under relevant items of this schedule here-in-after as supply only and cost of fixing charges including replacement of small parts such as screws, nut bolt and washers etc., are deemed to be included in this item 151 M& Lfor repair and topup different size offilter mediafor capacity 1000 LPH RO plant operating pressure 3.0 Kg/cm2 or suitable for site requirement complete all as specified and as directed by Engr-in-Charge 152 Supply & fixing,testing in replacement for different size of filters suitable for site requirement of capacity 1000 LPHcomplete all as specified and as directed by Engr-in-Charge 153 Supply and fixing replacement Membraneof size 2x500 of capacity 1000 ltrs/hr as per existing filter in RO Plant along with rubber ring complete complete all as specified and as directed by Engr-in-Charge
Contract Date: Jan 19, 2026 Contract Value : ₹ 47.63 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Andaman And Nicobar Islands View Result →
36.
Defence #8632122 AOC
Tender For Cleaning Of Over Head Tanks, Ug Sump And Swts With Connected Items At Cad Pulgaon; 1 Desilting of sedimentation tanks at CMPH of size 28 feet x 28 feet x 6 feet deep straight and 21 feet – 9 inch deep hopper type in two parts by dewatering of sedimentation tank completely by using diesel pump sets and desiltingapprox 2.50Mtr deep silt accumlated at bottom and removing the silt to a distance not exceeding 50Mincluding cleaning of settling tank by scraping the surface with bleaching powder & applying two coats white wash to wall surfaces internallyall as directed by EIC.NOTE : Two parts of settling tank shall be considered as one single unit. 2 Cleaning of 06 Manholes and connected hume pipe of washout drain of filtration plant at CMPH by removing foreign materials like plastic bags, bottles, tree roots,clothes, Mud etc. blocking the free flow of drain during back wash of filtration plant and disposing off garbage materials removed during cleaning to not less than 50m from site complete all as specified and as directed. Note:- Rates for any tools and plants(like wire brush, iron rod, axe etc.) required to complete the job deemed to be included in the quoted rate of this item. 3 Desilting and cleaning of Jack well at Gunjkheda Pump House intake jack well of size 15.80 M deep and 9.10 M dia from top, bailing out water from bottom, desilting approx 3.0 M deep silt accumlated at bottom and removing to a distance not exceeding 50 M including cleaning of walls and 02 Nos platform of the Jack well all as directed by EIC. 4 Desilting of round shallow well at Gunjkheda pumphouse on the bank of wardha river of dia 3 mtr and depth 3mtr by desilting approx 2 mtr deep silt accumlated at the bottom of the well and disposing off silt removed during cleaning to not less than 50m from site and Cutting/weeding of vegetation around the shallow well upto 3mtr complete all as specified and as directed. 5 Desilting and cleaning of Raw water under ground sump at CMPH of 4,50,000 litres capacity of size 12 feet deep and 40 feet dia and having one manhole of sump by bailing out water by using dewatering pump set and desilting approx 2.0 M silt accumlated at bottom and removing to a distance not exc 50 M including cleaning of side walls and applying two coats of white wash internally including painting to all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge 6 Desilting and cleaning of fillter water under ground sump at CMPH of 4,50,000 ltrs capacity of size 16 feet deep and 36 feet dia and having one manhole of sump by bailing out water by using dewatering pump set and desilting approx 1.0 M silt accumlated at bottom and removing to a distance not exc 50 M including cleaning of side walls and applying two coats of white wash internally including all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge. 7 Desilting and cleaning of filter water reservoir square type at picket hill of capacity 6,75,000 ltrs of size 86 feet x 41 feet x 11 feet and having only one manhole and bailing out water from bottom by dewatering pump set and desilting approx 1.0 M silt accumlated at bottom and removing to a distance not exc. 50 M including cleaning of side walls and applying two coates of white wash internally all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge. 8 All as per item No 7 here-in-before but of raw water at picket hill. 9 Desilting and cleaning of filter water reservoir 39 feet dia and 26 feet depth round type at picket hill of capacity 4,54,000/ 6,75,000 litres andhaving one manhole and bailing out water from bottom by using dewatering pump set and desilting approx 1.50 M silt accumlated at bottom and removing to a distance not exc. 50 M including cleaning of side wall and applying two coats of white wash internally & all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly, painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge. 10 Desilting and cleaning of Raw water reservoir (U/G Sump) round type at ‘Zone six’ of depot area of 4.90 M dia and 3.00 M depth of capacity 45,000 litres having one manhole and bailing out water from bottom by using dewatering pump set and desilting approx 0.60 M silt accumlated at bottom and removing to a distance not exc. 500 M including cleaning of side walls and applying two coats of white wash internally all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge. 11 Desilting and cleaning of Raw water U/G sump round type at ‘Zone six’ of depot of size 5. 90 M dia and 3.00 M depth of capacity 2,25,000 ltrs having one manhole and bailing out water from bottom by using dewatering pump set and desilting approx 1.50 M silt accumlated at bottom and removing to a distance not exc. 500m including cleaning of side walls and applying two coats of white wash internally all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge. 12 Desilting and cleaning of filter water reservoirs (U/G Sump) round type at ‘Zone six’ of depot of size 4.90 M dia and 3.0 M depth of capacity 45000 ltrs having one manhole and bailing out water from bottom by using dewatering Pump set and desilting approx 0.25 M silt accumlated at bottom and deposited to a distance not exc. .50 M including cleaning of side walls and applying two coats of white wash internally all as directed by EIC. 13 All as per item No 12 here-in-before but at MAP pump house CRLC area. 14 All as per item No 12 here-in-before but at perimeter near GP No 29 of Depot area. 15 Desilting and cleaning of Raw water OH tank round type at ‘Zone six’ of (P-1 & P-6) depot area, of size 18 M height and 4.00 M depth of capacity 67500 ltrs having one manhole and bailing out water from bottom by using dewatering pump set and desilting approx 0.30 M silt accumlated at bottom and deposited to a distance not exc. 500m including cleaning of side walls and applying two coats of white wash internally all as directed by EIC. 16 Desilting and cleaning of fresh water OH tank round type at depot perimeter near guard post No.24 of size 11 M heightand 3.00 M depth of capacity 10000 Gln having one manhole and bailing out water from bottom by using dewatering pump set and desilting approx 0.30 M silt accumlated at bottom and deposited to a distance not exc. 500m including cleaning of side walls and applying two coats of white wash internally all as directed by EIC. 17 Supply & mix Aluminium Sulfate ( Non FerricAlum) suitable for cleaning swimming pool water all as specifed and as directed by Engn-In-Charge. 18 Supply & mix Chlorine (TCCA 90) suitable for cleaning swimming pool water all as specifed and as directed by Engn-In-Charge. 19 Material and labour in replacement for filling filter bedfine crystal clear yellow sand washed before filling complete all as specified and directed. 20 Desilting and cleaning of Raw water under ground sump at CMPH of 1.35 lakh gallons capacity of size 12 feet deep and 40 feet dia and having one manhole of sump by bailing out water by using dewatering pump set and desilting approx 2.0 M silt accumlated at bottom and removing to a distance not exc 50 M including cleaning of side walls and applying two coats of white wash internally including painting to all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall not be less than 60cm x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-Charge 21 Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed. 22 M&L forRCC type B1 1:2:4 (20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete all as specified and as directed. 23 M&L forRCC type B1 1:2:4 (20mm graded stone aggregate) as in columns, piers, pillars, posts, pedestals & struts complete all as specified and as directed. 24 M&L in repair of rusted & crack CI water branch connection 150 to 300mm dia by using mechanical joint with connecting all accessoriescomplete all as specified and directed byEngineer-in-Charge. Note :(i)cost ofgasket and nut bolts ,washersjointing of materials as required are inclusive in above job.ii)Required T&P for job is provided by the Contractor is deemed to be included in the item rate.(iii)Excavation for pipe is included in job Work. 25 M&L for replacement of old CI special/fittings with new suitable for CI flanged/socket ends pipe upto 100 to 300 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch Y junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers, mechanical joint alongwith new rubber washer and nut bolts, etc. complete all as specified and as directed, 26 S&F in repair Mild steel work in Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framedbalusters, walk ways, railings, framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 27 Cleaning of Static water tank (SWTs) 50000 Gallan capacity upto(Depth of sludge/mud/silt 1.5 to 2.5) ( Round type) (Internal dia 7.8M, Depth of SWTs2.530M) in depot area ofdiffrent capacity and draining out water from bottomusing dewatering pump set and removing ALGEA/SLUDGE/Foreign impurities deposted at bottom, and throwing to a distance not exc. 50 M including cleaning of 2mtr from side walls and applying onecoats of white wash internally all as directed by EIC 28 All as per item No 27 above but of size … 50000 Gallan capacity upto (Depth of sludge/mud/silt 1.5 to 2.5)( Square type) (Internal dia 14.98M X 14.98M and depth of SWTS1.83M) 29 All as per item No 27 above but of size … 25000 Gallan capacity upto (Depth of sludge/mud/silt1.5 to 2) ( Round type) (Internal dia 9.144M, Depth of SWTs 1.930M 30 Cleaning of Static water tank (SWTs) in depot area ofdiffrent capacity and without draining out water and removing ALGEA/SLUDGE/Foreign impurities deposted at top by using net of the waterand throwing to a distance not exc. 50 M, all as directed by EIC. 31 Supply and fixing in replacement Onload changeover switch AC-23 (side handle) in sheet enclosure 415 Volt , 50 Hz doublepole 100 Amp all as specified and directed by EIC.
Contract Date: Jan 10, 2026 Contract Value : ₹ 15.95 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Maharashtra View Result →
37.
Defence #8627665 AOC
Tender For Provision Of Water Supply Scheme Alongwith Allied Infra At Rajouri Under Ge 862 Ews; 1 Schedule A Part-I (Building Work) Note :This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under Col. 5 siginifies this fact only. 2 Construction of Pump House building complete all as specified and shown on drawing. 3 Construction of RCC UG Sumpof capacity 40,000.00 Gallon complete all as specified and shown on drawing. 4 Schedule A Part-II (Internal electrification works) 5 Total amount of Sch A Part-II (Internal electrification works) brought forward from srl page No-22 6 Schedule A Part-III (Internal water supply works) 7 Total amount of Sch A Part-III (Internal water supply works) brought forward from srl page No-26 8 Schedule A Part-IV(DG Set Works) 9 Total amount of Sch A Part-IV (DG Set Works) brought forward from srl page No-25 10 Schedule A Part-V(Sewage Disposal Works) 11 Total amount of Sch A Part-V (Sewage Disposal Works) brought forward from srl page No-27 12 Schedule A Part-VI (External electrification Works) 13 Total amount of Sch A Part-VI (External electrification Works) brought forward from srl page No-31 14 Schedule A Part-VII (External water supply Works) 15 Total amount of Sch A Part-VII (External water supply Works) brought forward from srl page No-33 16 Schedule APart-VIII (Misc Items of Works) Note :This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under Col. 5 siginifies this fact only. 17 Construction of conventional type on site LLDPE septic tank designed to carry sewage and sludge water for 05 users with & including earthwork in any type of soil, PCC 1:4:8 below foundation, vent shaft & making connection, complete all as specified and directed. 18 Costruction of soakage well 2.40 mtr dia and 3.00 mtr depp below inlet (depth) from inlet pipe to ground level 45cm including excavation and earth work in any type of soil, PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate in foundation, wall in honey combed brick work in CM 1:4 cover slab of M-25 filling with brick bats, earth cushion on brick lining on top and inlet pipe 150mm dia and complete all as specified and shown on drawing 19 Supply Insttalation and testing of30 HP centrifugal, Pump set heavy duty with fully automatic star delta starterelectric driven,415 volt 3 phase 50 Hz. discharge capacity of pump set should be440 LPM at 135 Mtr head.completerequired with all necessary fitting and copper cablesingle core 70 sqmm for connection from LT panel to Starteras per suitable length in three phase supply including panel board of suitable size for fixing the starter and PCC foundation with chasis complete with nut bolt and channal all as directed at side(01+01 nos stand by) complete all as specified and as directed by Engineer-in-Charge. 20 Supply and fixing of CI Foot valve unit, suitable for 100mmbore conforming to IS-4038 including nuts ,bolts and washersetcfixing the same to the suction pipe for suitable depth in the UG sump ofthe pump set complete all as specified and directed. 21 M&L for valve chamber and construction of brick masonarry new valve pit chamber of size 1200mmx1200mmx1200mm (internal ) size 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick built in CM 1:6rendering in cement 1:6 finished even smooth using extra cement internally and 20mmthickin CM 1:4and finished fair and even supply and fix 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle ironframe embbeded in PCC copingwith locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron appplyingtwo coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified and directed. 22 supply and fixing Air release Valve Cast Ironwith two air Outlets, 100 mm dia bore and fixing Up in cast iron water supply mains, complete all as specified and as directed. 23 Supply fabrication and and erection structuarl steel workmade out of angle iron channels flats etc by riveted bolted or welded in built up section trusses in and including cutting hoisting fixing in position and applying two coat of wether proof synthetic enamel paint over a primera coat of anti-corrosive primer of approved colour suitable for base platform of 50000 ltr Smc watertank complete all as specified and as directed . 24 Supply & fixing of sintex SMC panel tank capacity 50000Ltrsquare type, made out of HOT PRESSMOULDED SHEET MOULDING COMPOUND panelsof size 1005mm x 1005mm x 75mm (flange), 1005mm x 2010mm x 75mm (flange) and 1005mm x 502mm x (flange) the flange should be perpendicular to the main surface. The shape shouldbe Trunked type for extra strength and 90 degree flanges pre drilled for bolting. All the Flanges of the 1 mt Panel should have 13 Nos. holes per sidefor fastening/joining the panels to one another. Hot Pressed Moulded SMC Pre Drilled Corner Pieces with built-in ribs of the size 75mm x 75mm should be provided for 90 degree joints of tanks wall to roof jointscomplete with olive green nuts, bolts and washers. Special sealent having excellentUV Resistance as well as suitable for portable water, complete with top covered construction having man hole with cover dia 600mm and internal FRP Ladder.The SMC Panelmust be ISI marked meeteing BIS 14399(part 1 & 2).Tank inlet and outlet size 80mm dia for connection of GI pipe all as specified and directed.(Make - Sintex or equivalent make as approved by GE) including cross arms works panel hight from grond level to 20feet all as directed at site. Note-:Structural work like cross arms, bracings etc shall bemeasured and paid separetlly . 25 Supply, installation, commissioning and testing ofservo controlled Voltage Stabiliser fully automatic operation, unbalanced type (individual phase control), copper wound 415 V, 50 Hz confirming to BIS 9815 : Part 1 : 1994 reaffirmed 2009, IP-45, three phase naturally oil cooled, indoor type & designed for input variation between 300 volts to 480 volts with output voltage stabilised at 415 volt with accuracy ±1.0% and speed of correction 15 volts per second of capacity 100 KVA including first filling of transformer oil having dielectric strength not less than 150 KV as per IS:335, 0-500 volts voltmeter, arrangment to check input voltage and output voltage, RYB indication lamp, high & low voltage cut off system, single phase preventor, time delay relay, servo byepass switch, overload & short circuit trip system, ammeter, oil level gauge& capacity overload 20% overload for one hour etc.,completeall as specified & directed 26 Supply,install,testing and commissioning outdoor type step down transformer 11000 volts/433 volts (at no load) ,AC , 3 phase 50Hz capacity 100 KVA corec type double copper wound , oil immersed , naturally cooled, oil natural, air natural (ONAN) with external cooling fins , delta connected on primary side (HV) ) star connected on secondary side (LV) in accordance with vector symbol , Dyn 11 (vector group) with neutral brought out on secondary side (LV side) and having tapping at +5% to -10% (at 2.5% each step) HV side to be changed by means of hand operated off load tap changer gear. The Transformer shall be IS 1180Part 1:2014 (level -2) and BEE certied and shall comprise of the following :- (a) cable end box on HT side suitable for 95sqmm 3 core XLPE cable (b) cable end box on LV side suitable for 150sqmm 3.5 core XLPE cable (c)Oil conservator with filter type frain valve and oil level gauge (d)dehyderating breather with first fill dehyderating agent (silica gel)(e) explosive vent(f)Thermometer pocket on tank cover(h) Two earthing terminals on tank cover to facilate fixing of 32x6mm copper earth strip for earthing of neutral body. 27 (g)one no 100mm dia , dial type thermometer , vapour pressure type , having range 0-120 degree celcius with metal guard having maximim perimeter reading , temperature indicator with resisting device for transformer. (i)Rating plate and terminal making plate (j)oil level gauge (k)oil drain/filter valve(l) lifting lugs (m) Oil filling hole with cap / plug with connecting plate complete (n) air release valve plug(o)Four plain solid cast steel deattachable rollers(p)extra bushing for neutral , outside the LT cable box for providing independent earthing for Neutral(q)First filling of new and unused transformer oil IS:35/93(4th revision), marked (Make:Savita/Poweroil) filtered and tested upto 40KV dielectric strength at 2.5mm air gap between testing. 28 Supply , installation, testing and commissioning ofLT Panel outdoor typefabicrated of 3.15mm thick CRCA sheet dust and vermin proof powder coated double door type independent cabin including locking arrangement for each MCCBs, bus bar rated 400 Ampenclosed complete suitable for operating on 415 volt 50 Hz AC supply internally wired with copper conductor/strip of adequate size from main incoming MCCB to bus bar and bus bar to outgoing MCCB/MCBs having legs 45cm made out of 65x65x6mm angle iron grouted on brick masonary platfor upto 30 Cm. Brick masonary platform should be 60Cm above the ground level, comprising the following:- (a) 4 Pole MCCB 25 KA 250 A - 1 Nos(b) Digital Ammeter with CTs& selector switch - 1 Nos(c) Digital Voltmeter & selector switch - 1 Nos(d) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA -03 Nos(e) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA - 01 Nos(f) SPN MCB 40A- 01 Nos.(g) Onload changeover TPN 250 A - 01 No. (h)copper bus bar TPN 250 Amps rating -01 set 29 Angle Lamp holder insulated body with back plate for batten fittings and including one15 Watt LED Bulb non dimmable B-22 cool daylight all as specified and as directed. 30 Supply and fixingEnvironmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, complete all as specified and as directed. 31 Supplying, installing, testing & commissioning of factory assembled Diesel Engine withdriven generating set coupled withalternator AC to give continuous output of 100KVA at a power factor of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, directly coupled with diesel engine, watercooled, mounted on common base frame complete with in built fuel tank (service tank) of adequatecapacity with fuel line, built in electronic governor & accessories, PCC foundation work as per manufacturers instructions, vibration damper pads,control panelshowing all parameters of engine & alternator, sound proof canopy & other accessories etc. and confirming to the under-mentioned technical specifications confirming to BS:5514 & IS 10000 complete in all respect with following accessories, parts all as specified & directed.(a) DIESEL ENGINE :4 cylinders , turbo charged watercooledat 1500 RPM under NTP conditionsIS 4722, BS 5000, IEC 3411, ISO 8528, BS 5514, ISO 3046, conforming to with an overload capacity of 10% for one hour in 12 hrsof continuousoperationwith the following accessories 32 (i) Radiator with blower fan or heat exchanger with guard .(ii) Pipe coupling for engine cooling system piping (iii) Corrosion inhibitor coolant(iv) Paper element filters-(i)Fuel(ii) Lube oil(iii) By Pass(vi) Fly wheel housing and fly wheel to suit (vii) Engine bearing mechanism in fly wheel housing (viii) shut off coil with safety for LLOP /HWT./ Over speed.(ix) Dry type air cleaners and vacuum indicators .(x)Residentialsilencers.(xi)Stainless steel exhaust flexible bellows.(xii)Motor driven priming pump.(xiii) Electric starter.(xiv)Battery charging alternator.(xv) Exhaust piping made outof STICC class MS Pipe inclusive of all accessories and hardware , necessary supportas per manufacturer’s recommendations to sustain back pressure with rain cap(xvi) Mineral wool insulation 2 inch thick covered with aluminium sheets of 30 gauges for the entire length of exhaust pipe.(xvii) First fill of oil coolant and diesel during commission and 12 hours testing.(xviii)Interconnecting copper cabling of adequate capacity between batteries andcontroller.(xix) Fuel pipe. Fuel Tank_ 24 hours full load diesel storage capacity inbuilt fuel tank with mounting brackets factory fabricated made of MS sheet with level indicator fuel inlet , fuel outlet , air vent, drain plug,inlet arrangement filling from exterior of canopy etc. 33 (xx) Battery :- 150 AH,12 Volts maintenance free battery of Qty-2 Nos with leads and terminal. (xxi) PCC Foundation :- Civil work and PCC foundation for installation DG Set as per manufacturers instruction.(b) ALTRERNATOR : 100 KVA at 0.8 PF lagging, 415 volts, 3 Phase, 4 wire, 50 Hz at 1500 RPM self excited and self regulated with AVR brushless excitation band of voltage ± 1% of rated voltage from no load to full load insulation class H, IP-23 self ventilated and conforming to IS4722, BS5000, IEC 34/1, ISO 8528, BS5514, ISO3046, suitable for above mentioned diesel engine complete all as specified and directed . (c) ACOUSTIC ENCLOSURE : Factory made acoustic enclosure (canopy) 100 KVA DG set to reduce noise level to 75 db (A), measuredat 1.00, meter distance @75% load auditable frequencies as per guidelines of CPCB & comprising of following-:(i) Sound proof insulation 100mmthick Rock wool (Density 65 Kg/cum) (ii) Outer body: Not less than 1.6 mm thick CRCA. (iii) Door 1.6 mm thick CRCA(iv) Inner surface: 1.0 mm thick powder coated & perforated CRCA / GI sheet (v)Common base frame: ISMC 250 34 (d)AMF CONTROL PANEL :LT panelmadeout of 2mm thick CRCAsheets in suitable compartmentsfront openable duly powder coated for a weather proof and long lasting finishing including the following:- (i) MCCB suitaibly rated ,qty OEM recommended(Make: Legrand/Havells/L&T).(ii) contactor of suvitable size of 2 Nos. Set of phase indicating lamps with HRC fuses - 01 Set.(iii)Voltmeter 96 sq.mmdigital type 0 to500 volts rangewith selector switch: 01 set(iv) Amp meter 96 sq.mmdigital type 0 to 400 Amps range with suitable CTs complete - 01 set.(v) KWH meter digital type (vi)Digital PF meter (vii) Set of suitable CT”s(viii) Indicating lamps for supply and load on (ix)Instrument fuses (HRC type)(x) Bottom gland plates for incoming and outing cable(xi)Circuit diagram plateNOTEl: Testingh of DG Set must be done on ground by the contractor as per ground execution requirment and providing the fuel and heat load is tested by the machine for minimum of 24 Hrs. 35 Cleaning of site by way of bush cutting for operating theSuitable truck Mounted DTH drilling rigs along with accessories etc to the site of work & erecting of rig including leveling for required area for starting the job workall as specified & directed 36 Provision of trial bore hole /well of size less than 250 mm dia size pilot bore through any kind of soil/strata including hard dense stone /boulder by means of direct rotary method below ground level upto 150meter depth complete all as specified and directed by Engineer in charge.Note :- 1. The depth of trial boring of the tube well at the site indicated by the Eng-in-charge is anticipated to be 120 meter below ground level. 2. The depth may, however be ordered in writing to be varied by the Eng-in-charge up to a maximum of 25 %/150 mtr of the above mentioned depth (plus or minus). 3. If the Eng-in-charge decided that suitable water bearing strata is not available in the aforesaid bore or the boring cannot be continued further on account of the type of strata ,4c Further Eng-in-charge may order the contractor to bore at other site(s) 5. Eng-in-charge shall give three no. of directionto the contractor for trial hole/well of size less than 250mm dia.6. No any extra charge to be provided to contractor 37 M & L for reaming of developmentbore by reaming of 250mmfor 60 RM from ground level complete all as specified and directed. 38 M & L for Reaming of development bore from depth exceeding 60 metre to 120 meter of dia 250 mmcomplete all as specified and directed. 39 Supply ,assembling including jointing lowering and fixing MS ERW blind pipe200 mm dia and thickness 8mm including all fittings and fixtures upto 100m deep complete all as specified & directed. 40 Supply ,assembling including jointing lowering and fixing slotted MS ERW pipe 200 mm dia and thickness 8mm including all fittings and fixtures complete all as specified & directed. 41 M&L for strata sample (at every 6 meters depth) one set in suitable box pattern, earth sample strata should be produced as per IS and submitted to the department. The box shall be 2nd class hard wood with suitable locking arrangement etc complete all as specified and directed. 42 M&L for borewell chart on acrylic sheet of size 60 cm x 15 cm duly marked permanent marking including 12mm thick plywood frame, clamps for fixing on wall etc all as specified and directed. 43 M&L for development of tubewell by means of over puming high velocity jetting with 600 PSI Air compressor all as specified in IS 8110-2000 PARA 4.3 including arrangement for equipment fitting and supplyl of sodium hepta sulphate 60 kg complete all as specified & directed. 44 All asper Sl item no 8.23 above but by means of over pumping muddy water for subsequent hours until clear discharge as per clause 9.3 of IS 2800(Part-1)-2009 complete all as specified and directed. 45 Collection of sample of water and conduct testing in Govt lab for all parameters (Chemical and Bacteriological Tests) of water to assess the potability and submit the report complete all as spcified and directed. 46 Supply & Fixing of MS well cap for 200mm dia of thickness 8 mm of pipe at the top of casing pipe of bore well with locking arrangement complete all as specified and directed. 47 Supply & packing of pea gravel 20mm to 25mm size of approaved quality as ordered to packed around the casing pipe/slotted pipe in the bore well to entire depth complete all as specified & directed 48 Supply & Fixing MS flat Iron clamp 100mm x 10mm thicksize clamp fixed with 16mm dia nut bolts and washers 2 on both sides of clampfor holding 65mm MS column pipe,2Noscomplete all as specified and directed. 49 Supply, installation, commissioning and testing of submersible pump setof capacity 15 HP ,electric driven, 415 volts discharge430 LPMat 135 mtr headwith CI Impeller, CI diffuser, EN-8 shaft, stainless steel stainer comprising with suitable capacity of Electric motor designed for working on 415 volts, 3 Phase, 50Hz, filled with oil for effective cooling and life long lubrication of heavy duty ball bearing and mechanical seal complete with Digital electronic softstardelta starter of suitable capacity includidfitted on suitable size panel board included with & including protections against over load, single phase, phase seque nce reversalcomplete all as specifed and as directed. Note: the capacity od Submersible pump may be change as per depth of borewell for required yield of water. No extra payment shall be made to contractor. Note:- 1. Rate quoted by contractor deemed to be inclusive for the cost for calculating the capacity of submersible pump set . In this regard a certificate along with the copy of the design of the pump by manufactrer shall be furnished by the contractor for suitability of the motor for selected pump suitable for bore as to deliver continuous water with stable LPM. 2. Rates quoted by contractor deemed to be inclusive of one set of submersible pump and conected items are installed in borewell and one set of submersible pump and connected items as stand by. 50 M&L for provision of MS Tie rod for anchoring of submersible pump set fabricating out ofIron rod of size 8 to 10 mm, 2 Nos. vertical to hold the submersible pump set alongwith column pipes, length suitable to length of submersible pump set including suitable nut bolts and washers including tail piece of size 65mm of 1mtr length having one side flaged end and other end threaded for fixing with submersible pump including two Nos suitable size welded Flat Iron 40mmx6mm size with holes for fixing of tie rod complete all as directed. 51 Supply and fix PVC insulated and PVC sheathed multi stranded copper conductor cable for submersible pump set, ISI marked, conforming to IS-864 of size 3 core 10 Sqmm, 1100 volts grade, including necessary water proof connection to submersible pump at cable lead complete all as specified and directed. 52 Supply & Fixing pipe GI tubing heavy grade 80 mm bore duly welded flanged (thickness of flange 12mm having 04 holes) with and including rubber packing of 6mm thick, nuts, bolts, washers complete in 3 mtr length as column pipe in bore well complete all as specified and directed. 53 Supply and lowering stainless steel V wire screen 150mm dia, K type packet(wall thickness should not be less than 8mm), with opening 0.50mm, inside the tube well assembly in the manner with top of the packet resting on the lowermost end of the assembly complete all as specifed & directed.Note:-1. The Screen pipe shall be lowered as per requirement of the borewell at desired depth inside the MS casing pipe.2. Screen pipe shall be lowered as to hang with the end of MS casing pipe lowered. 54 Supply & fixing suitable casing drive shoe for 200mm dia and bit tube as per requirement of depth or ODEX attachment all as specifed & directed by Engr -in-charge.
Contract Date: Jan 19, 2026 Contract Value : ₹ 1.29 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Jammu And Kashmir View Result →
38.
Science and Technology #8572991 AOC
Tender For Various Petty Maintenance Nature Jobs At Ncl Colony; 1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. 4 In cement mortar 5 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 6 In cement mortar 7 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 8 For thickness of tiles 10 mm to 25 mm 9 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 10 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 11 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: 12 All kinds of soil 13 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. 14 All kinds of soil 15 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-Charge. 16 Ordinary rock 17 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : In All Kind s of Soil 18 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 19 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 20 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 21 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth. 22 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 23 Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete 24 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars 25 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 26 Cement mortar 1:6 (1 cement : 6 coarse sand) 27 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : 28 Cement mortar 1:6 (1 cement : 6 coarse sand). 29 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. 30 Area of slab over 0.50 sqm 31 Providing and fixing machine cut and both side machine polished Kadappa stoneslab for vertical and horizontal shelves for wardrob, open shelves, cooking platform, windows sills and soap racks laid over 12mm thick cement mortar 1:3 (1cement : 3 coarse sand) wherever required and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting chase in walls and making good the same etc. complete. With 40 mm thick stone slab for cooking platform 32 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 33 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 34 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 35 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 36 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 37 300x16 mm 38 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 39 125 mm 40 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 41 300x16 mm 42 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 43 300x10 mm 44 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 45 125 mm 46 Providing and fixing to existing door frames. 47 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 48 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge. 49 With non decorative veneering on both sides. 50 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fix Portion 51 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 52 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) 53 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 54 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 55 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 56 With stainless steel cover plate minimum 1.25 mm thickness. 57 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 58 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 59 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 60 Hot finished welded type tubes. 61 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. 62 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. 63 Providing and laying Rough shahabad stone flooring of the 25 to 40mm thick & of required width in plain / diamond pattern on a bed of 1:6 cement mortor including cement float, skirting,joints,pointing in cemnet mortor 1:3 curing and cleaning etc. complete. 64 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (i)Single socketed pipes. 65 75 mm diameter 66 110 mm diameter 67 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 68 Single Tee with Door 69 75x75x75 mm 70 110x110x110 mm 71 Bend 87.5° 72 75 mm bend 73 110 mm bend 74 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 75 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture inthe grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 76 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. 77 15 mm cement plaster on the rough side of single or half brick wall of mix : 78 1:4 (1 cement: 4 fine sand) 79 Neeru finish to plastered surface in all position including scaffolding and curing etc.complete item as per instruction of Engineer-in-charge.. 80 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. 81 Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : 82 Flush/ Ruled pointing 83 Painting with aluminium paint of approved brand and manufacture to give an even shade . 84 Two or more coats on new work 85 French spirit polishing : 86 Two or more coats on new works including a coat of wood filler. 87 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. 88 With cement mortar 1:4 (1 cement : 4 fine sand). 89 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 90 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 91 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 92 Two or more coats on old work 93 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 94 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. 95 Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. 96 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 97 Orissa pattern W.C Pan of size 580x440 mm 98 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 99 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. 100 (a) Internal Work- Exposed on wall 101 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 102 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 103 3 mm thick 104 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. 105 With G.I. barbed wire 106 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 107 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 108 Made of G.I. wire of dia 4 mm 109 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 110 Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 111 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : 112 W.C. pan with ISI marked white solid plastic seat and lid 113 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 114 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 115 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 116 15 mm dia. nominal bore 117 20 mm dia. nominal bore 118 25 mm dia. nominal bore 119 40 mm dia. nominal bore 120 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 121 50 mm dia. nominal bore 122 80 mm dia. nominal bore 123 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 124 150 mm diameter 125 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 126 150 x 100 mm size P type. 127 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 128 150 mm diameter 129 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 130 150 mm dia. R.C.C. pipe 131 300 mm dia. R.C.C. pipe 132 Extra for depth for manholes With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 133 With common burnt clay FPS bricks of class designation 7.5. Size of chamber 90x80 cm 134 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 135 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D - 2.5 136 Rectangular shape 600x450 mm internal dimensions 137 Shifting of building rubbish,malba,excavated soils,etc by truck /small dumperof capacity 1 to 1.25 brasswith in NCL campus, rates are inculding loading and unloadingcomplete item to be executed as directed by Engineer-in-charge. 138 Levelling of unwanted of debries at various location by JCB including excavation pit /tenches and lifting of excess materials in dumpers / truck as per instruction of Engineer-in-charge. 139 Cleaning of the road side gutters,drains and shoulders including necessary earth excavation uptothe bottom of gutters/drains ,including clearing of vegetation, grass,brush and after cleanning the gutter/drains lifting the excavated earth upto 1km with in campus by trucks and clean the area in full respect complete item as per directed by Engineer-incharge.
Contract Date: Jan 06, 2026 Contract Value : ₹ 30.03 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
39.
Defence #8526849 AOC
Tender For Repair And Cleaning Of Sewage Line, Septic Tank, Soakage Well Etc And Other Misc Works In Hq 10 Sect Rr And 29 Rr Bn Under Age (I) Cif (K); 1 Taking out liquid/ solid content/ soil/ garbage from sump/ septic tank and sewage line either manually, by pumping or by machine or cleaning throughly including disposal of liquid/ solid/ soil/ garbage content out of the cantonment area and covering with layer of earth complete all as specified and as directed by the Engineer-in-Charge (Note:- Bamboos/cleaning rods will be used for prodding/desludging purpose strictly or by machine transport i.e. sewer cleaning suction machine if necessary or pumping through machine if necessary) 2 Bailing out water directly from septic tank/ soakage well of any size and depth with suitable capacity pumps to the nearest open drain or low lying area in such a manner so as to preclude the possibility of movement of water through any structure and not to cause inconvenience/ nuisance in the areanearby, complete all as specified and as directed by the Engineer-in-Charge. 3 Removing of manhole/drain cover for cleaning of sewage lines/ drain pipes 100mm bore laid to any slope or gradient, depth upto 3.00 mtrs including manholes with manual or mechanical method, removing the sludge outside the cantonment area and depositing the sludge in a pit (including digging of pit)and covering the sludge with layer of 25mm thick layer of earth and spreading unslaked lime on the pit, refixing the manhole cover in its original position, complete all as specified and as directed by the Engineer-in-Charge 4 Removing of manhole/drain cover for cleaning of sewage lines/drain pipes 150mm bore laid to any slope or gradient,depth upto 3.00 mtrs including man holeswith manual or mechanical method, removing the sludge outside the cantonment area and depositing the sludge in a pit (including digging of pit)and covering the sludge with layer of 25mm thick layer of earth and spreading unslaked lime on the pit, refixing the manhole cover in its original position , complete all as specified and as directed by the Engineer-in-Charge. 5 Removing of manhole/drain cover for cleaning of sewage lines/drain pipes 200mm bore laid to any slope or gradient,depth exc 3.00 mtrs but n.exc.3.00 mtrs including man holeswith manual or mechanical method, removing the sludge outside the cantonment area and depositing the sludge in a pit (including digging of pit)and covering the sludge with layer of 25mm thick layer of earth and spreading unslaked lime on the pit,refixing the manhole cover in its original position, complete all as specified and as directed by the Engineer-in-Charge. 6 Cleaning of blocked WC including and upto first manhole manually and well flushing with clear water, making the seat functional including deposting the sludge in a pit (including digging of pit) not less than 100 meter away from site of cleaning and covering the deposited sludge with minimum 25cm thick layer of earth and spreading unslaked lime on the pit, completeall as specified and as directed by the Engineer-in-Charge. 7 Cleaning of blocked nahani/gully traps by removing mud/sludge manually ,washing thoroughly gratings of the trap, CI waste pipes by opening the inspection eyesmanually and well flushing with clear water,including deposting the sludge in a pit (including digging of pit) not less than 100 meter away from site of cleaning and covering the deposited sludge with minimum 25cm thick layer of earth and spreading unslaked lime on the pit, complete all as specified and as directed by the Engineer-in-Charge. 8 Notes for Srl item Nos. 01 to 07 : Rates against these items includes for :(i) Cleaning and clearing/disposing off all the sludge/ sewage contaminated water in solid / semi solid / liquid state from sewage lines, manholes, septic tanks etc as detailed initemsshall be maintained for blockage freeand smooth functioning of all the sewage lines and related sewage items as detailed in itemsfor a period of 330 (Three Hundred Thirty) days i.e., the date of completion of contract given in work order No-1. (ii) The complaints shall be collected from theoffice of Engineer-in-chargeat 9.00 AM by contractor/Contractors representative and shall be got signed from the user occupantafter clearing the complaints. These complaint slips will also be got signed at Engineer-in-charge office after the satisfactory completion of each complaint. No complaint shall be kept pending/unattentedfor a period of 48 hours. Any damage to manhole covers, gully trap covers, CI access doors of CI pipes any dia, PVC pipes/fitting, P traps, floor traps during the process of cleaning/clearing shall be made good by the contractor by replacing same with newwithout any extra cost to the Govt.(iii) If contractor fails to complete the complaint within stipulated period i.e 48 Hrs, a recovery of Rs 200 per complaint per day shall be levied.(iv)Length of pipeline shall be measured from centre to centre of manhole. 9 Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc., or for shafts, wells, cesspits, manholes etc., not exceeding 10 Sqm on plan and n. exc. 1.5 metre in depth and getting out, in hard/dense soil, complete all as specified and as directed by Engineer-in-Charge. 10 Returning, filling in, including spreading , leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed by Engineer-in-Charge. 11 Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed by Engineer-in-Charge. 12 Demolition and breaking up of drain pipes 150mmbore(Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and as directed by Engineer-in-Charge. 13 Demolition and breaking up of drain pipes 200mmbore(Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and as directed by Engineer-in-Charge. 14 Demolition and breaking up of drain pipes 300mmbore(Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and as directed by Engineer-in-Charge. 15 M&L for 150 mm bore reinforcement concrete pipe, Class NP2,laid in trenches and jointed in CM 1:1 and tested on concrete bed or directly on hard grounds, jointing and testing, complete, all as specified and as directed by Engineer-in- Charge. Note:- Excavation, earth work and concrete bed shall be measured and paid for separately under respective items of this BOQ. 16 M&L for 200 mm bore reinforcement concrete pipe, Class NP2,laid in trenches and jointed in CM 1:1 and tested on concrete bed or directly on hard grounds, jointing and testing, complete, all as specified and as directed by Engineer-in- Charge. Note:- Excavation, earth work and concrete bed shall be measured and paid for separately under respective items of this BOQ. 17 M&L for 300 mm bore reinforcement concrete pipe, Class NP2,laid in trenches and jointed in CM 1:1 and tested on concrete bed or directly on hard grounds, jointing and testing, complete, all as specified and as directed by Engineer-in- Charge. Note:- Excavation, earth work and concrete bed shall be measured and paid for separately under respective items of this BOQ. 18 M&L for Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes 150mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. 19 M&L for Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes 200mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. 20 M&L for Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes 300mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. 21 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as requiredcomplete all as specified and as directed by the Engineer-in-Charge. 22 Demolition of brickwork or stone/boulder masonry, built in cementmortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles including removing of rubish, complete all as specified and as directed by Engineer-in-Charge. 23 M&L for Brick work with sub class B bricks, straight or curved on plan exceeding6m mean radius, built in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge. 24 Taking down cement plaster, of any description on brick or stone or cement concrete walls/ceiling including raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed by Engineer-in-Charge. 25 Rendering 15 mm thick, on other than fair faces of brick or concrete surfacesin cement mortar 1:4 and surfaces finishedeven and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. 26 Rendering 15 mm thick, on fair faces of brick or concrete surfacesin cement mortar 1:6 and surfaces finishedeven and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. 27 Demolition of cement concrete ( un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) includingremoval of broken material from site, complete all as specified and as directed by Engineer-in-Charge. 28 Providing precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate, as in landings, cover slabs (for manholes etc.), septic tank, drain, chullah hoods and similar articles with plain faces set in cement mortar 1:4 including necessary formwork, complete all as specified and as directed by Engineer-in-Charge.Note:- Reinforcement shall me measured and paid for separately. 29 M&L for Plain cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in channels/benching of manholes, drains, laid to shape and slope and surfaces finished even and smooth using extra cement, complete all as specified and asdirected by Engineer-in-Charge. 30 M&L for Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete, complete all as specified and asdirected by Engineer-in-Charge. 31 TMT steel bars8mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engineer-in-Charge. 32 M&L for Plain cement concrete 1:2:4,type B-1 ( using 20 mm graded crushed stone aggregate) as in lintels upto 1.50 metre clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork,complete all as specified and as directed by Engineer-in-Charge. 33 Dismantling of 100/75mm dia cast iron, PVC pipe or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required,complete all as specified and as directed by the Engineer-in-Charge. 34 S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by the Engineer-in-Charge. 35 S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by the Engineer-in-Charge. 36 S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by the Engineer-in-Charge. 37 S&F PVC (SWR) bends any radius having bore 110mm with or without oval access door, complete all as specified and as directed by Engineer-in-Charge. 38 S&F PVC (SWR) bends any radius having bore 75mm with or without oval access door, complete all as specified and as directed by Engineer-in-Charge. 39 S&F PVC (SWR) 110mm vent cowl, complete all as specified and as directed by Engineer-in-Charge. 40 S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed by Engineer-in-Charge. 41 Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed. 42 M&L 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. 43 Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed. 44 M&L 32mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. 45 Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves, for water tubing etc andmaking good, cutting exc 10cm girth but not exc 20cm girth in stone walls 46 M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over chalk whiting complete all as specified. 47 S&F Vitreous China urinals, hallf stall urinals (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) 48 Note:-An amount of Rs. Rs 21,350.00 on account of credit schdule for Sch A Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
Contract Date: Dec 30, 2025 Contract Value : ₹ 6.66 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Jammu And Kashmir View Result →
40.
Housing Urban and Rular Development #8500687 AOC
Tender For E0001: Earth Work Excavation For Foundation In All Soils (Including Refilling) A) 0 To 2M Depth. , E0003: Earth Work Excavation In Soft Disintegrated Rock (Including Refilling) A) 0 To 2M Depth. , E0005: Earth Work Excavation For Open Foundation (Excluding Refilling). A) 0 To 2M Depth. , E0006: Earth Work Excavation For Open Foundation For Drains In All Soils (Excluding Refilling) A) 0 To 2M Depth. , Re0006: Providing Pre-Constructional Antitermite Treatment , F0040: Supplying And Filling In Foundation And Basement With Filling Crushed Stone Sand , F0006: Supplying And Filling With 40Mm Size Hard Broken Stone Jelly In Foundation And Basement And Other Similar Works Including Cost Of Materials , F0007: Supplying And Filling With 20Mm Size Hard Broken Stone Jelly In Foundation And Basement And Other Similar Works Including Cost Of Materials , F0026: Filling In Foundation And Basement And Other Similar Works With Excavated Earth , F0015: Supply And Filling In Foundation And Basement With Stone Dust (Sand And Stone Dust Mixed In The Ratio Of 1:1) In Layers Of Not More Than 10Cm Thick , F0013: Supply And Filling In Foundation And Basement With Gravel , F0043: Supplying Of 3 To 10Mm Size Hbsj Including Conveyance And Cost Of Materials Etc , Fl0115: Supplying And Laying Of Rubber Molded Hydraulic Pressed Paver Blocks Following Thick Using Stone Dust With Required Design & Color Including Cost, Conveyance Of Paver Block And Labour Charges For Laying With Proper Slope And Gradient Etc B.83Mm Thick Paver Block , Csmp0002: Plain Cement Concrete 1:5:10 (One Of Cement, Five Of Crushed Stone Sand And Ten Of Hard Broken Stone Jelly Including Mortar Plasticizer , Csmp0003: Plain Cement Concrete 1:2:4 (One Of Cement Two Of Crushed Stone Sand And Four Of Hard Broken Stone Jelly) , Csmp0004: Plain Cement Concrete 1:8:16 (One Of Cement, Eight Of Crushed Stone Sand And Sixteen Of Broken Brick Jelly Including Mortar Plasticizer , Cs0037: Supplying And Fixing Of Precast Cement Concrete Slab For Cupboard/Ward Robes Shelves, Cover Slab For Chambers, Baffle Walls Side Slabs Of Boxing Around Windows And Other Similar Works In Standardised Concrete Mix M-20 Grade Ii. 40Mm Thick A. In In Foundation & Basement , C0065: Providing And Laying In Position, Standardised Concrete Mix M-20 Grade A. In Foundation And Basement , B. In Stilt/ Ground Floor , C. In First Floor , D. In Second Floor , C0055: Supplying And Fixing Monolithic Reinforced Cement Concrete Door Frames Of Size 100X75mm With One Edge Groove Size T X 20 Mm (T Represents The Shutter Thickness) Using Standardised Concrete Mix M20 Without Vibrating Including Cost Of Steel And Fabrication Of Reinforcement Grills A. 1000 X 2100 Mm , Csmp0001: Supplying And Fixing Of Fibre Mixed Precast Slab Of 50Mm Thick Of All Required Shapes Made In Cement Concrete 1:3:6 Used Including Cost Of All Materials, Moulding, Curing, Transportation, Laying, Pointing Etc., For Approach Road,Pavement Slab And Other Similar Works Etc., , Bmp0010 : Brick Partition Walls 50Mm Thick Using Kiln Burnt Country Bricks Of Size 8¾X4¼x2 (22X11x5cm) In Cement Mortar 1:4 (One Of Cement And Four Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) For Super Structure In The Following Floors B. In Ground Floor , C. In First Floor , Bmp0011: Brick Work In Cement Mortar 1:5 (One Of Cement And Five Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) Using Fly Ash Bricks Of Size 230X110x70mm Having The Compressive Strength Of Not Less Than 100 Kg/Cm² In Foundation And Basement , Bmp0012: Brick Work In Cement Mortar 1:6 (One Of Cement And Six Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) Using Fly Ash Bricks Of Size 230X110x70mm Having The Compressive Strength Of Not Less Than 100 Kg/Cm² For Superstructure In The Following Floors B. In Ground Floor/Stilt Floor , C. In First Floor , D. In Second Floor , Bmp0013: Brick Partition Wall In Cement Mortar 1:4 (One Of Cement And Four Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 110Mm Thick For Super Structure In The Following Floors Using Fly Ash Bricks Of Size 230X110x70mm Having The Compressive Strength Of Not Less Than 100 Kg/Cm² In The Following Floors A. In Foundation And Basement , B. In Ground Floor/Stilt Floor , C. In First Floor , Bmp0014 :Brick Partition Wall In Cement Mortar 1:4 (One Of Cement And Four Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 70Mm Thick For Super Structure In The Following Floors Using Fly Ash Bricks Of Size 230X110x70mm Having The Compressive Strength Of Not Less Than 100 Kg/Cm² In The Following Floors B. In Ground Floor/Stilt Floor , C. In First Floor , D. In Second Floor , Flmp0001: Flooring With A Bed Of Cement Concrete 1:5:10 (One Of Cement, Five Of Crushed Stone Sand And Ten Of Hard Broken Stone Jelly Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) Using 40Mm Size Hard Broken Stone Jelly , Flmp0002: Plastering The Top Of Flooring In Cm 1:4 (One Of Cement And Four Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 20Mm Thick , Fl0024: Finishing The Top Of Flooring With Cement Concrete 1:3 (One Of Cement And Three Of Blue Granite Chips Of Size 10Mm And Below) 20 Mm Thick Ellispattern Flooring (No Sand) , Fl0025: Weathering Course With Concrete Broken Brick Jelly 20Mm Gauge , Flmp0004: Finishing Top Of Roof With One Course Of Pressed Tiles Of Approved Superior Quality Of Size 23Cmx 23Cmx20mm Thick Laid Over Weathering Course In Cm 1:3 (One Of Cement And Three Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag,) 12Mm Thick Mixed With Water Proofing Compound At 2% , Flmp0005: Supplying And Fixing Of Colour Glazed Tiles (Best Approved Quality And The Same Shall Be Got Approved From The Executive Engineer Before Using) Over Cement Plastering In Cm 1:2 (One Of Cement And Two Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 10Mm Thick , Flmp0006: Supplying And Fixing Of Colour Ceramic Tiles Anti Skid Without Corrugated Design For Flooring And Other Similar Works (Best Approved Quality, Colour And Shade Shall Be Got Approved From The Executive Engineer Before Using) Over Cement Mortor 1:3 (One Of Cement And Three Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 20Mm Thick , Flmp0010: Supplying And Fixing Of Ivory Colour Vitrified Tiles Of Size 59.5X59.5Cmx10mm For Flooring And Other Similar Works (Best Approved Quality, Colour And Shade And The Same Shall Be Got Approved From The Executive Engineer Before Use) In Cement Mortar 1:3 (One Of Cement And Three Of Curshed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 20Mm Thick , Flmp0011:Supply And Laying Superior Variety Concrete Designer Tiles For Flooring In Cm 1:3 (One Of Cement And Three Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 20Mm Thick , Fl0154 : Providing Water Proofing Treatment For The Toilet Sunken Portion With Epoxy Coat As Per The Following Specification: Surface Preparation: Cleaning And Preparation Of Surface With The Help Of Wire Brush. Wash The Roof With Clean Water. Repair And Fill Cracks. Water Proof Coating: Providing And Applying 2 Coats Of Acrylic Polymer Modified Cementitious Coating Dr.Fixit Pidifin 2K Of M/S.Pidilite Industries Having Elongation At Break 50%; 5 Bar Resistance To Positive Water Pressure, Adhesive Strength Astm D 7234-1 N/Mm2, And Crack Bridging Ability Two Coats Coat To Dry For 6 To 8 Hours. , Fw0004: Providing Form Work And Centering For Reinforced Cement Concrete Works A. For Column Footings, Plinth Beam, Grade Beam, Raft Beam, Raft Slab Etc., , B.Plain Surfaces Such As Roof Slab, Floor Slab, Beams, Lintels, Lofts, Sill Slab, Staircase Waist, Portico Slab And Other Similar Works , C.For Square And Rectangular Columns And Small Quantities Such As Sunshade, Parapet Cum Drops Window Boxiing, Fin Projection And Other Similar Works. , D.For Vertical Walls (Sump) , F.Curved Surface , Plmp0001: Plastering With Cm 1:5 (One Of Cement And Five Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 12Mm Thick , Plmp0002: Plastering With Cm 1:4 (One Of Cement And Four Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 12Mm Thick , Plmp0003: Special Ceiling Plastering In Cement Mortar 1:3 (One Of Cement And Three Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 10Mm Thick , Plmp0004: Plastering In Cm 1:3 (One Of Cement And Three Of Crushed Stone Sand (One Of Cement And Three Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 12Mm Tk. Mixed With Water Proof Compound At 2% , Plmp0005: Plastering In Cm 1:5 (One Of Cement And Five Of Crushed Stone Sand Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) 12Mm Thick For Border Finish In All Floors A) 150Mm Wide Border , B) 75Mm Wide Border , C) 50Mm Wide Border , Pa0022: Painting The New Wood Work With Two Coats Of Approved First Class Synthetic Enamel , Pa0026: Painting The New Iron Work And Other Similar Works Such As Pvc /Astm Pipes, Kerb Stone And Grills With Two Coats , Pa0032: Supplying And Applying Of Full Putty One Coat With Aproved Make Wall Putty For Smooth Finishing The New Cement Plastered Walls , Pa0037: Painting Two Coats With Ready Mixed Plastic Emulsion Paint Of First Class Quality Paint Of Approved Colour And Shade Including A Priming Coat On Cement , Pa0042: Painting Two Coats With Ready Mixed Exterior Emulsion Paint , Pa0037.A: Painting The Ceiling With One Coat Plastic Emulsion Paint Incl. Primer , Pa0027: Providing Wooden ( Melamen Door ) Polish For New Wood By Removing By Blade Scrapping The Exisiting Dirt , J0001: Supplying And Fixing Of Teak Wood Wrought And Put Up For Frames Of Doors A) Teak Wood Over 2.00 Metre And Below 3 Metre Length , B) Teak Wood Below 2.00 Metre Length , J0021: Supply And Fixing Of Best Approved Superior Variety Magnetic Door Catches , Jw0007: Supplying And Fixing Of Best Indian Teak Wood Openable French Window Of Following Size Having Single Bay Openable With Frame Made Up Of Tw Scantling 75 Mm X 37.50 Mm (Verticals- 2 Nos. And Horizontals - 2 Nos. Top & Bottom) Shutters With Styles, Glass Panels Using Frosted Glass 4 /5.5 Mm Thick Fixed With T.W. Beading Of Size 15 Mm X 12 Mm Including Cost Of All Materials, Labour Charges For Wrought And Putup And Fixing In Position And Brass Furniture Fitting Such As 3 Nos Of 5 Butt Hinges, 2 Nos Of 6/12 Tower Bolt, 1 No Handle, 1 No Nylon Bush And With Required Brass Screws Etc., C) 1.00X1.95M , J0029: Supplying Of Mild Steel Hold Fasts Horizontally Twisted Of Size 230X40x4mm , Jv0022: Supplying And Fixing Upvc (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators , Jw0042: Supplying And Fixing Upvc (Un-Plasticized Polyvinyl Chloride) Windows Of Casement Type , Jw0044: Supplying & Fixing In Position Of Upvc Sliding Windows , Jd0095: Supply And Fixing Of 25Mm (+/- 1Mm) Thick Wpc Decora Door Which Is Extruded As A Single Core Door With Lead-Free Compound. The Door Is Suggested To Be Hinged To The Wpc Frame Of Size 75 X 50Mm With Minimum Of 5 Inch Butt Hinges Of Ss Including Cost Of Wpc Door Frame, Shutter, Ss Cylindrical Lock And Door Closer And Labour Charges Etc., Complete Complying With Standard Specifications And As Directed By Department Officers. (The Brand Should Be Got Approved From The Executive Engineer Before Use.) , Jd0098: Supplying And Fixing Of Best Indian Teak Wood Paneled Door Of Double Leaves Shutters With Brass Fittings A) Double Leaf Suitable For Door Size 1800Mm X 2100Mm , Jd0059: Supplying And Fixing Of Single Leaf Solid Core Flush Door Shutters Suitable For Door Of Size C) 1000 X 2100 Mm , Gr0001: Supplying And Fixing Mild Steel Grills As Per The Design Approved To Verandah Enclosure , Re0005: Supplying, Fabricating And Placing In Position Of Mild Steel Grills / Ribbed Tor Steels (Without Cement Slurry) , Cs0012: Providing Cuddappah Slab Of 20Mm Thick, Finishing With Two Sides For Cupboard (A) In Ground Floor , (B) In First Floor , Cs0015: Providing Cuddappah Slab Of 40Mm Thick, Finishing With Two Sides For Cupboard A. In Ground Floor , B. In First Floor , Jd0094: Providing T.W. Double Leaf Shutters For Cupboard/Ward Robes With 9Mm Thick Phenol Bonded Bwr Grade Ply Wood , Flmp0018: Supplying And Fixing Of Pre-Cast Kerb Stone Of Size 450X300x150mm Made In Cement Concrete 1:3:6 , Ws0002: Supplying And Fixing Of 110Mm Dia Pvc Swr Pipe Rain Water Downfall Pipe , Ms0050) C.I Steps 5Kg , Ws0033: Supplying And Fixing Of Half Turn C.P Long Body Tap Of 15Mm Dia , Ws0036: Supplying And Fixing Of Half Turn C.P Short Body Tap Of 15Mm Dia , Ms0053) Supplying And Fixing Of C.I Manhole Cover 60 X 60 Cm (50 Kgweight) , Ws0006: Supplying, Laying, Fixing And Jointing The Following Pvc Pipes As Per Astm A) 32Mm Dia Astm D Schedule 40 Threaded Pvc Pipe With Necessary Pvc/Gi/Gm Specials , B) 25Mm Dia Astm D Schedule 40 Threaded Pvc Pipe With Necessary Pvc/Gi/Gm Specials , Ws0007: Supplying, Laying And Fixing Of 20 Mm Dia Gi Pipe ‘B Class Of Best Approved Quality For Hot Water Line , Ws0276: Supplying, Laying, Fixing And Jointing The Following Pvc Pipes As Per Astm A) 20Mm Astm D Schedule 40 Threaded Pvc Pipe With Necessary Upvc Specials , Ws0107: Supplying And Fixing Of 32Mm Dia Pvc Tee With End Cap Of Best Approved Quality With Is , El0337: Supplying And Delivery Of Following Pvc Aluminium Armoured Ltugcable (Pvc Aluminium Armoured Ltug 1100V Grade) With Isi Mark Including Cost Of Cable And Conveying To The Site Of Work Etc., All Complete And As Directed By The Departmental Officers. [The Brand And Quality Of The Ug Cable Should Be Got Approved From The Executive Engineer Before Use]. H). 3.5 Core 50 Sq.Mm. , El0343: Supplying And Fixing Of Brass Cable Gland Suitable For Following Core Sqmm Pvc Armoured Ltug Cable With Earth Strip H). 3.5 Core 50 Sq.Mm. , El0346: Supply And Laying Of Pvc Insulated And Sheathed Following Core And Sq.Mm Flat Type Copper Cable Confirming To Is 694/1990,Cable For Submersible Motor Etc., B) 3 Core 2.5 Sq.Mm Flat Type Copper Cable , El0548: Labour Charges For Conveying And Fixing Of Ug Cable Of Size Of 4 To 25 Sq.Mm And 2, 3, 3 1/2 , 4 Core (Agl) , El0549: Labour Charges For Conveying And Laying Of Ug Cables In The Cable Trench Including Earth Work And Providing Sand Cushion With Brick Layers Below Ground Level , Ws0236: Drilling Of (150Mm) Vertical Bores In Hard Rock Area To Any Required Depth As Desired By Tnphc A) Upto 150M Depth Ending Below Ground Level , B) From 151M Upto 180M Depth Ending Below Ground Level , C) From 181M Upto 210M Depth Ending From Ground Level , D) From 211M Upto 240M Depth Ending From Ground Level , E) From 241M Upto 250M Depth Ending From Ground Level , Ws0162: Labour Charges For The Erection Of Three Phase Upto 5 Hp Submersible Pumpset In Borewell / Openwell , Ws0265: Three Phase Panel Board- D.O.L With Two Level Guard And Auto Start Supply For 3 Hp Motor , Ws0266: Three Phase Panel Board- D.O.L With Two Level Guard And Auto Start Supply For 5 Hp Motor , Ws0278: Supply And Delivery Of Clear Water Vertical Wet Type Submersible Pump Suitable For 100Mm/150Mm Dia Borewell Conforming To Is 8034/2002 As Amended Thereafter And Bee 3 Star Rated Capable Of Discharging Noted Lpm Against Head Of Water Column Due To All Causes O. 50 Lpm X 175 M , Ws0279: Supply And Delivery Of Open Well Submersible Pump Set Conforming To Is 14220 /2002 And As Amended Thereafter And Bee 3 Star Q) 100 Lpm X 50M , Ws0017: Supply And Fixing Of Following Gi Pipes B Class Of Best Approved Quality,With Isi Mark Including Cost And Conveyence And Fixing In Position D) 25Mm Dia Gi Pipe B Class , Ws0020 : Labour Charges For The Following Dia Gi Pipe Below Ground Level Including Earth Work Excavation, Cutting, Threading, Jointing, Lowering, Laying To Proper Grade And Alignment And Refilling The Trench With Excavated Earth Etc., C) 25 Mm Dia Gi Pipe , Sa0123: Supplying, Laying And Jointing The Following Dia Of Upvc Pipes With Isi Mark Of Best Approved Quality Including Labour Charges For Cutting, Threading Jointing The Pipes Wherever Necessary Wrapping The Pipes With Teflon Tape And Fixing The Same With Clamps And Screws Etc. A. 32Mm Dia Upvc Pipe , B. 50Mm Dia Upvc Pipe , Ws0234 : Labour Charges For The Following Dia Pvc/Upvc Pipe Below Ground Level Including Earth Work Excavation, Cutting, Threading, Jointing, Lowering, Laying To Proper Grade Alignment And Refilling The Trench With Excavated Earth Etc. A) 50Mm Dia Pvc Pipe , C) 32Mm Dia Pvc Pipe , Ws0018: Supply And Fixing Of Following Gi Pipes B Class Of Best Approved Quality,With Isi Mark Including Cost And Conveyence And Fixing In Position Ws0018.X.A. 50Mm Gm Non Return Valve , Ws0018.Vi.A : 50Mm Dia Gi Union , Ws0018.I.A: 32Mm Dia Gi Coupling , Ws0018.V.C : 32Mm Dia Gi Elbow , Ws0018.Vii.C. 32Mm Dia G.I Hex Nipple , Ws0018.X: 32 Gm Non Return Valve , Ws0018.Ix.C : 32Mm Dia Gun Metal Gate Valve , Ws0280: Supplying And Fixing Of Following Dia Upvc Specials Of Best Approved Quality Including Cost Of Specials And Labour Charges For Fixing Etc., Ws0280.Iii.A : 50 Mm Dia Union , Ws0280.Ii.A : 50 Mm Dia Tee , Ws0280.I.A : 50 Mm Dia Elbow , Ws0280.Ix.A : 50 Mm Dia Hex Nipple , Ws0280.V.A : 50 Mm Dia Coupler , Ws0280.I.C : 32 Mm Dia Elbow , Ws0280.Iii.C : 32 Mm Dia Union , Ws00280.V.C: 32 Mm Dia Coupling , Ws0280.X.C : 32 Mm Dia Mta , Ws0280.Xi.C : 32 Mm Dia Fta , Ws0280.X.A : 50 Mm Dia Mta , Ws0280.Xi.A : 50 Mm Dia Fta , Ws0280.Vii.A :50 Mm X 40 Mm Dia Reducer Tee , Ws0243: Supplying Of Following Dia Upvc Column Pipe For Borewell A) 32Mm Dia Upvc Column Pipe , Ws0235: Supply And Delivery Of Nylon Rope Of Best Appred Quality. , Ws0239: Supply And Erection Of 150Mm Dia Of Pvc Casing Pipes (6Kg/Cm2) Without As Per Is 12818/2010 Of Approved Quality For Bore Wells , Ws0240: Supplying And Fixing Of 160Mm Dia Pvc End Cap For Borewell Casing Pipe Of Approved Brand Etc., All Complete And As Directed By The Departmental Officers (The Quality And Brand Of Pvc End Cap Should Be Got Approved By The Executive Engineer Before Use) , Nl0006: Supplying And Fixing Of Following Size Aluminium Die Casting Lettering And Numbering With Approved Coloured Powder Coated In Matt Finishing A) 9 Dia Aluminium Dye Casting Letters , C) 12 Dia Aluminium Dye Casting Letters , Nl0005 : Supplying And Fixing In Position Of Following Size Aluminium Diecasting Tnphc Logo / Emblem With Approved Coloured Powder Coated In Matt Finishing Including Drawing Model Letters On The Paper, Preparing The Design, Moulding, Casting, Filing, Colouring To The Requirement By Spraying The Paint, Transporting To Site And Labour For Scaffolding Drilling And Fixing The Letters By Using Projected Rod Fevicol Quick Fix And Cement Slurry And Redoing The Damaged Area And Colouring Etc., A) 2 (24) Height Tnphc Emblem , Nl0007) Supplying And Fixing Of Following Size Plastic Foam Plate Of 3Mm Thick With 3 Height Vinyl Cutting Numbers With Approved Colours Etc., Complete And As Directed By The Departmental Officers. (The Quality Of The Material Should Be Got Approved From Executive Engineer Before Use) D) 18 X 4 Plastic Foam Plate , Ms0058: Supplying And Delivery Of Nav-Tal 7 Levers Hardened (4 Keys)-7169 (5002) Including Cost Of Materials And Labour Charges For Fixing In Position Etc., All Complete And As Directed By The Departmental Officers. (The Brand Should Be Got Approved By The Executive Engineer Before Use In Work) , Sa0002: Supplying And Fixing Of Porcelin Wash Hand Basin (White Without Pedastal), Superior Variety Of Size 550X400mm , Sa0036: Supplying And Fixing The Following Dia Pvc(Swr) Pipe With Isi Mark Confirming To Is 13952:1992- Type A With Pvc Cowl And Relevant Specials Confirming To Is , Samp0006: Supplying And Fixing 150Mm X 100Mm Size Stone Ware Gully Trap With Iron Gratings Over A Bed Of 150Mm Thick Brick Jelly Concrete In Cement Concrete 1:8:16 (One Of Cement, Eight Of Crushed Stone Sand And Sixteen Of Broken Brick Jelly) Using 40Mm Size Brick Jelly And Brick Masonry Wall 110 Mm Thick Using Kiln Burnt Country Bricks Of Size 8¾X4¼x2¾ (22X11x7cm) In Cm 1:5 (One Of Cement And Five Of Crushed Stone Sand) Plastered With Cm 1:3 (One Of Cement And Three Of Crushed Stone Sand) 12Mm Thick Including Mortar Plasticizer (Liquid) At 200Ml Per Bag , Samp0003: Supplying And Fixing Of Pvc Nahani Trap Not Less Than 75Mm 4 Way / 2 Way (Superior Variety) Having Minimum Of Water Seal Of 50Mm Confirm To Relevant I.S. Specifications With Its Latest Amendments Including Resting On The Bed Of Brick Jelly Concrete 1:5:10 (One Of Cement, Five Of Crushed Stone Sand And Ten Of 40 Mm Gauge Brick Jelly) Including Mortar Plasticizer (Liquid) At 200Ml Per Bag Etc., Complete , Samp0004: Supplying And Fixing Of Indian Water Closet White Glazed (Oriya Type) Of Size 580 Mm X 440 Mm Of Approved Make With Isi Mark (To Be Got Approved From Ee Before Use) With Pvc Swr Grade P Or S Trap (Using Crushed Stone Sand) (Including Mortar Plasticizer (Liquid) At 200Ml Per Bag) In Ground Floor. , Samp0005: Supplying And Fixing Of Indian Water Closet White Glazed (Oriya Type) Of Size 580 Mm X 440 Mm Of Approved Make With Isi Mark (To Be Got Approved From Ee Before Use) With Pvc Swr Grade P Or S Trap (Using Crushed Stone Sand) (Including Mortar Plasticizer (Liquid) At 200Ml Per Bag). (Other Than Ground Floor) , Sa0025: Supplying And Fixing Ewc Superior Variety (White) 500Mm With Pvc Swr Grade ‘P Or ‘S Trap , Sa0031: Supplying And Fixing The Following Dia Pvc (Swr) Pipe And Relevant Specials Including Packing The Joints With Rubber Lubricant A) 110Mm Dia Pvc Swr Pipe Including All Required Pvc Specials Etc., All Complete., , B) 75Mm Dia Pvc Swr Pipe Including All Required Pvc Specials Etc., All Complete., , Sa0035: Supplying, Laying And Concealing The 50Mm Dia Pvc (Swr) Pipe With Isi Mark Confirmed To Is 13952-1992 Type-B For Waste Water Line , Sa0048: Supplying, Laying And Jointing The Following Dia Upvc Non Pressure Pipe A) 110 Mm Dia Upvc Non Pressure Pipe , B. 160 Mm Upvc Non Pressure Pipe , Sa0053: Supplying And Fixing Of The Following Dia Pvc Equal Tee As Per Is 10124/1982 B) 160 Mm Dia Pvc Equal Tee (Bis 7834/1975). , Sa0155: Supplying And Fixing Of Cp Two Way Bib Cock With Health Faucet , Ms0002: Supplying And Fixing Of 20Mm Dia Aluminium Hanger Rods , Ms0003: Supplying And Fixing Of Aluminium Towel Rail Of 75Cm , Ms0006: Supplying And Fixing Of Aluminium Plate With Five Pin For Coat Stand , Ms0007: Providing And Fixing Iron Chromium Plated 8 Gauge Picture Hooks , Ms0008: Supplying And Fixing Of Beveled Edge Mirror Of Approved Quality And Brand Of Size 500X400x5.5Mm , L0001: Supplying And Planting Of Avenue Trees , L0004: Supplying And Fixing Of Triangular Shape Chicken Mesh Tree Guard Using 8Cm Dia , El0002: Wiring With 1.5 Sqmm Pvc Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable A) Light Point With Ceiling Rose , B) Light Point With Bakelite Battern Type Holder , C) Point Wiring For Calling Bell/Buzzer With Push Type Switch With Required Buzzer. , El0010: Wiring With 1.5 Sqmm Pvc Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable For Fan Point , El0018: Wiring With 1.5 Sqmm Pvc Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable For Stair Case Light Point , El0026: Wiring With 1.5 Sqmm Copper Pvc Insulated Unsheathed Single Core 1.1 K.V. Grade Cable For 5 Amps 5 Pin Plug Socket Point @ Switch Board Itself , El0034: Wiring With 1.5 Sqmm Copper Pvc Insulated Unsheathed Single Core 1.1 Kv Grade Cable For 5 Amps 5 Pin Plug Socket Point At Convenient Places , El0041: Supplying And Fixing 15 Amps 3 Pin Plug Type Socket With Switch , El0214: Earthing And Earth Connections: Providing Earthing Station Using Pipe Electrode As Per Is 3043 Using 2.5M Of 40Mm Dia Gi Pipe , El0074: Supply And Fixing Of Best Approved Superior Variety Concealed Type Fibre Box With M.S. Fan Hook , El0075: Charges For Assembling And Fixing Of Ceiling Fan Of Different Sweep With Necessary Connections And Fixing Of Fan Regulator , El0312: Supply And Fixing Of 6 Way Horizontal Triple Pole And Neutral Mcb Sheet Steel Enclosure Distribution Board With Double Door (Metal) With 1 No. 63 A 4 P Mcb Switch As Incoming And 18 Nos. 6A To 32A Sp Mcb As Outgoing On Wall With Earth Connection Only. , El0078: Supply And Delivery Of Following Electric Ceiling Fan With Isi Mark With Blades And Double Ball Bearing, Capacitor,Etc., Complete A) 48 Electric Fan 1200Mm Sweep , El0085: Supplying And Fixing Of 225 Mm Dia Sweep Ac Exhaust Fan Of Approved Isi Quality Including Necessary Wall Opening, Fixing And Finishing The Wall Opening And Making Good Including Cost Of Materials, Labour For Fixing, Chipping And Redoing Necessary Inter Connection, Scaffolding, Hire Charges For Tools And Plants Etc., , El0070: Supplying & Fixing Of Led Bulbs Suitable For Fixing It To Pendent / Bakelite Battern Holder Of Best Approved Variety A) 9 Watts Led Bulb , B) 12 Watts Led Bulb , El0047: Supply And Fixing Of 18 Watts Led Tube Light With Fitting Of Four Feet Long , El0252: Supply And Fixing Of 20A Flush Type Wall Socket, 20A Dp Mcb And 32A Dp Mcb Complete Set For Ac Plug In Flush With Wall With Earth Connection (For Ac Plug) Including Cost Of Materials And Labour Charges Etc., All Complete As Directed By The Departmental Officers. (The Brand And Quality Should Be Got Approved By The Executive Engineer Before Use). , El0045: Supplying And Fixing Of Water Tight Bulk Head Fitting With Guard Suitable For 12W Led Lamp , El0100: Supply And Fixing Of Led Street Lighting Luminaries Suitable For Fixing Led Street Light Fitting With Led (Light Emitting Diode) Lower End Lamp With Heavy Gauge Aluminium Sheet Fabricated Canopy Treated Primered And Painted With Stove Enameled Crca Sheet Steel Contact Gear Cum Reflector Tray Duly Finished Glossy White For Optimum Reflection With Clear Ribbed Acrylic Bowl Fixed To Aluminium Frame With Gasket Lining Secured To Canopy By Means Of Hinges For One Side And Foggle A.25W Led Street Light Fitting With Led , El0298: Supply And Fixing Of Electro Mechanically Operated Three Phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker , El0190: Run Off Main With 2 Wires Of 2.5 Sq.Mm. Pvc Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable , El0191: Supply And Run Off Main With 2 Wires Of 4 Sq.Mm. Pvc Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable , El0202: Supply And Run Off Main With 4 Wires Of 4 Sq.Mm Pvc Insulated Single Core Multi Strand Fire , El0174: Supplying And Laying Of 8 Swg Gi Wire For Earth Connection On Wall , El0227: Supplying And Fixing 3 Nos Of 63 Amps 500 Volts Grade , Nl0002: Supplying Fabrication And Erection In Position Of M.S. Scheme Name And Layout Board , El0165 : Supply And Fixing Of 63 Amps Triple Pole Main Switch With Fuse And Neutral Link On A Suitable Well Varnished Teak Wood Board Including Necessary Interconnection,Cost Of All Materials Etc., , El0434: Supply And Fixing Of 63A Three Phase 500V 4 Pole Change Over Switch On Suitable Angle Iron Frame (Angle Iron Frame 38 Mm X 38 Mm X 6 Mm) Work With Ms Cable Entry Boxes With Earth Connection Only
Contract Date: Dec 26, 2025 Contract Value : ₹ 1.24 Crore
Government Departments No of Bidders 5
Tamil Nadu View Result →
41.
Defence #8437161 AOC
Tender For Maintenance & Repair Of Stp And Sewage Pump Installation Replacement Of Parts Under Ge (East) Bareilly; 1 Dewateringandpumpingoutofexistingaccumulatedsewage/sludgeat STP MHof Capacity 150 KLDfromTube Settler tankby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, including removingduck mediaand followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls after that replacing of duck media with new as per existing complete all as specified and directed. 2 All as per Srl item No.1 here-in-before but STP 80 OR of Capacity 90 KLD 3 All as per Srl item No.1 here-in-before but STP42 Map and Lal Phatak of Capacity upto 461 KLD 4 All as per Srl item No.1 here-in-before but STP JRC of Capacity01 MLD. 5 Note for item no. 1 to 4 :- (a)The followings are deemed to be included in the rate quoted.(i) The disposal of accumulated/deposited sludge after dryingoutsidethedefence landtoa distance exceeding1.5 KM and notexceeding 5.00KM fromthe STP. (ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge bemade and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days.(iii) Cutting and rewelding of supporting MS frame structure.(b)Replacement of unsv rusted portion of supporting MS frame structure. The cost of MS frame will be measured and paid separately 6 DewateringandpumpingoutofexistingaccumulatedsewagefromChlorine Contact Tank and Treated Water Tank at STP 80 OR of capacity of 90 MLDby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note :- (i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP.(iii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. 7 All as per Srl item No. 6 here-in-before but STP MHOR of Capacity of 150 KLD complete all as specified and directed 8 All as per Srl item No.6 here-in-before but STP JRCof Capacity 01 MLD complete all as specified and directed. 9 All as per Srl item No.6 here-in-before but STP 42 Map , Lal Phatakof Capacity 461 KLD complete all as specified and directed. 10 DewateringandpumpingoutofexistingaccumulatedSludge and Water from Sludge Holding Tank at STP 80 ORs of Capacity of 90 KLDby using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note:- (i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. (iii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP. 11 All as per Srl item No.10here-in-before but STP MHOR of Capacity of 150 KLD complete all as specified and directed. 12 All as per Srl item No. 10 here-in-before but STP JRCof Capacity 01 MLD complete all as specified and directed. 13 All as per Srl item No. 10 here-in-before but STP 42 Map& Lal PhatakSTP of Capacity 461 KLD complete all as specified and directed. 14 DewateringandpumpingoutofexistingaccumulatedSludge and mud including cutting of grass, bushes, plant growth fromSludge Drying Beds at STP under GE East bareilly by using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note:-(i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account.(ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. (iii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP. (iv) Cleaning of sludgetransfer line from tube settler tank to Sludge holding tank 15 Supply and fix in replacement of Glass tube type Air Rotameterincluding taking down existing unserviceable Air Rotameter of any description complete all as specified and directed.Make: Flowstar / Microflow / Aster 16 M&L forreplacement of Unsv MBBR Mediafrom the tank and supply of filling Fresh media of MBBR Media in the main reactor as specified of existing /suitable Make with the following specificatios:-Effective surface area of media Approx - 400 Sqm/Cum(b) Mesdia ht Approx - 15/10 mm(c)Media dia Approx-22 mm(d) Weight per unit surface area approx -22 mm(e) Voidage - >093 gm/Cucm(g) Media fill Range - 25-55% of volume 17 S&F in replacement, heavy duty cloth strips of filter press as per existing frame of capacity ofupto 01 MLDand complete over hauling of filter press including testing complete all as specified and directed. 18 S&F in replacement, heavy duty cloth strips of filter press as per existing frame of capacity of 150KLDand complete over hauling of filter press including testing complete all as specified and directed. 19 Supply and fixed in replacement, connecting and testing of(non return valve ISI - 5312) CI of 150 mm sizes bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers complete all as specified and directed. 20 Supply and fix in replacement of CI Butterfly valve of following size as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts,bolts,washersetc.includingtakingup/downofexistingunserviceablebutterflyvalveofanydescription complete of size 50 mm all as specified and directed.Make : Leader / Crawley / Audco / L&T / Zoloto 21 All as per Srl item No.20 here-in-before but 100 mm completeall as specified and directed. 22 All as per Srl item No.20 here-in-before but 150 mm completeall as specified and directed. 23 Material and labour for M.S. Black Pipe of size 80mm bore, plain end as per IS:1239 (I), nominal bore, heavy Grade (C class)with all fittings like elnow, tee reducer, flange nut bolt with washer including cutting, welding and joining etc as per site requirement and applying two coats of syntheticenamelpaintofapproved colourover acoat ofred oxideprimer includingtaking up/ downof existing unserviceable pipe of any description complete all as specified and directed.Make : Tata / Jindal / Prakash Surya. Note:- fixing of pipe line will be carried out on wall or floor and cost of the same will be deemed to be included in tthe rate quoted however for the pipe line laid under ground by digging trench will be paid saperately. 24 All as per Srl item No.23here-in-before but 100 mm completeall as specified and directed. 25 All as per Srl item No.23 here-in-before but 150 mm completeall as specified and directed. 26 All as per Srl item No.23 here-in-before but 50 mm mm completeall as specified and directed. 27 M&L for Structure Steel Work, made out of godquality-A Rolled Mild Steel Chaneel, Angle or Tee Sections, MS Sheet with hinges & looking arrangements et. Cut to shape / ordinary length, drilled and counter sunk for screws / Bolts, including bending and welding duly painted with 2 coats of anticorrosive synthetic enamel paint over a coat of Zinc Chromate as in framed work with MS Sheet cover complete all as specified and directed. 28 M&L for complete overhauling and repairing of multi-grade sand filter and carbon filter unit with replacement of filter media as per existing and activated carbon filter media including replacement of filter media including other connected assessories as required at site of STP JRC capacity of 1 MLD including testing and wire mesh size shuold as per existing, colour in Black, Grade of GAC8x30 and bulk density approx 450kg /cum, Hardness (abrasion number) approx 95-99 and PH value - 7 complete all as specified and directed 29 All as per item Ser No. 28 here-in-before butSTP 80 (OR) capacity of 90 KLD completeall as specified and directed. 30 All as per item Ser No. 28 here-in-before butSTP MH capacity of 150 KLD completeall as specified and directed. 31 All as per item Ser No. 28 here-in-before butSTP No. 42 and Lal Phatakcapacity of461/500 KLD completeall as specified and directed. 32 M&L for cleaning, scrapping out side of vessel properly including painting with one coat zinc chrome primer & two coats of best quality synthetic enamel paint etc. complete all as specified and directed 33 M&L for servicing / maintenance of air compressor 415 volts 50 Hz motor complete with cleaning of air tank incl replacement of all defective parts and lubricating oil complete all as specified and directed.Note:-Spare parts will be measured and paid under relevant item separately.All minor consumables incl T&P and Tpt required shall be deemed as included in the rates quoted. 34 Supply only rotor roller machineing and alignmentcomplete all as specified and directed. 35 Supply only all packingfor casing complete all as specified and directed. 36 Supply only air filtercomplete all as specified and directed. 37 Supply only O-Ring complete all as specified and directed. 38 Supply only oil seal complete all as specified and directed. 39 Supply only Gear wheel pair complete all as specified and directed. 40 Supply only lock nut complete all as specified and directed. 41 Supply only lock washer complete all as specified and directed. 42 Supply only ball bearing No. 2211 complete all as specified and directed. 43 Supply only ball bearing No. 3211 complete all as specified and directed. 44 Supply only ball bearing No. 6211 complete all as specified and directed. 45 Supply only V belt complete all as specified and directed.Make Fainiyar 46 M&L removing the submersbile pump set from existing position, Shifting to authorised workshop for repair work, dismantle/open, removing the burnt winding, cleaning of rotor / stator, re-winding the motor with F Class insulation super enameled copper wire of size equivalent to the original winding incl insulate packing materials, Varnishing, Drying incl replacement of both water seal, compound, both bearing, fill with new lub oil etc. re-assembling the pump set, installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed. Note : Rate quoted shall deemed to be inclusive ofdraining out the sewage water from collection tankfor taking out the unserviceable motor and pump including lowering and lifting 47 All as per Srl item No. 46here-in-before but more than 7.5 HP and upto 10 HP. 48 All as per Ser item No. 46here-in-before but more than 11 HP and upto 15 HP. 49 M&L for removing the submersbile pump set from existing position, Shifting to authorised workshop for repair work, overhauling and servicing of submersible pump set with motor incl replacement of unsv nuts, bolts & washers, seals, packing, opening of delivery casing volute for checking of non clog type impeller checking & replacement of stuffing box unit seals and match seal housing /casing cover for checking/filling of suitable grade lubricating oil upto required, checking of seat & replacement of seat ring, checking for smoothness of motor runnning and clearance between impeller and casing ring and casing cover, greasing of flower bearing of pump set, incl cleaning of 3 phase electric submersible squirrel cage induction motor in water tight housing testing it for its water tightness by air for its joints incl replacements of unsv parts as required re-assembling the pump set, installing back to the original position testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed.Note :- 1. Spares parts will be measured and paid under relevant items separately all minor consumable/Eqpt/Tpt required shall be deemed as included in the rates quoted2. Note : Rate quoted shall deemed to be inclusive ofdraining out the sewage water from collection tankfor taking out the unserviceable motor and pump including lowering and lifting 50 All as per Srl item No. 49 here-in-before but more than 5 HP and upto 10 HP complete all as specified and directed. 51 All as per Srl item No. 49 here-in-before but more than 10 HP and upto 15 HP complete all as specified and directed.. 52 Supply only Non Clog impeller suitable for and upto 5 HP submersible pump set complete all as specified and directed. 53 All as per Srl item No. 52 here-in-before but more than 5 HP and upto 10HP complete all as specified and directed.. 54 All as per Srl item No. 52 here-in-before but more than 10 HP and upto 15 HP complete all as specified and directed.. 55 Supply only upper/lower or back to back roller or Ball bearing suitable for and 3 HP to 15 HP non clog submersible pump set complete all as specified and directed.Make FAG/SKF 56 Supply only Mechinical seal carbonite25 mm suitable for and upto 3 Hp to 5 HP non clog submersible pump set complete all as specified and directed 57 Supply only Mechinical seal carbonite33 mm suitable for and 7.5HP to 20 HP non clog submersible pump set complete all as specified and directed 58 Supply only oil seal2 HP to 5 HP non clog submersible pump set complete all as specified and directed. 59 M&L for dismantling and removing the motorof the mono block / coupled Pump set or Air Compressor from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding cleaning rotor/stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding incl insulate packing materials, Varnishing, Drying etc inclinstalling back to the original position, testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed. 60 All as per Srl item No. 59 here-in-before but more than 5 HP and 10 HP completeall as specified and directed.. 61 All as per Srl item No. 59 here-in-before but more than 10 HP and upto 20 HP completeall as specified and directed.. 62 M&L for Dismantling and removing the mono block / Coupled pump set from the existing position after disconnecting the inlet/outlet pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, opening the pump side, servicing the pump set including cleaning the shaft including replacement of worn out bearing, bushes, check nut, shaft sleeves etc. and installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the capacity of pump upto 5HP complete all as specified and directed.Note: Spares parts will be measured and paid under relevent item separately. Allminor consumables / Eqpt /Tpt required shallbe deemed as included in the rates quoted. 63 All as per Srl item No. 62 here-in-before butmore than 5HP upto 10HP complete all as specified and directed. 64 All as per Srl item No. 62 here-in-before butmore than 10HP upto 20 HP complete all as specified and directed. 65 Supply only Ballbearing of suitable size for and upto 5 HP mono block / Coupled pump set. Make: SKF / NBCcomplete all as specified and directed. 66 All as per Srl item No. 65 here-in-before butmore than 5HP upto 10 HP complete all as specified and directed. 67 All as per Srl item No. 65 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 68 Supply only brass bush of suitable size for and upto 5 HP mono block / Coupled pump set complete all as specified and directed. 69 Allas per Srl item No 68 here-in-before butmore than 5 HP upto 10 HP complete all as specified and directed. 70 All as per Srl item No. 68 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 71 Supply only new impeller of suitable size for and upto 5 HP mono block / Coupled pump set complete all as specified and directed. 72 All as per Srl item No. 71 here-in-before butmore than 5 HP upto 10 HP complete all as specified and directed. 73 All as per Srl item No. 71 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 74 M & L in repairs for Gland packing of thickness upto 14mm complete all as specified and directed. Make: Spitmaan Graflon / Charminar / Champion 75 M&L in repairs Air Cobe, suitable size for mono block / Coupled pump set, made outof brass, as per site complete all as specified and directed. 76 M&L for cleaning and desiIting the sewage intermediate well of any capacity, dewatering the complete well,removing allthe deposited sludge, soil and other material from the well including bailing / pumping out muddy water from the well by manually or by providing suitable pump sets from bottom level of well, scrapping out the scales / deposits from inner surface of the well throughly, washing with bleaching powder and soda ash, cleaning / bailing out settled materials completely by any means and removing sludge to a distance up to 3 km out side of defence land limit and dispose off in low lying area including dewatering as required including writing Tank cleaned on ......(date) with 10 cm size white letter on black surface by engaging skilled artist using first quality synthetic enamel paint complete all as specified and directed.Note:-(i) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in Lift well.(ii) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe Lift wellcost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. (iii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at lift well in order to complete the work at the earliest. 77 Allas per Srl item No 76 here-in-before but Collection tank ofSTP JRC complete all as specified and directed. 78 Allas per Srl item No 76 here-in-before but Collectiontank ofSTP MH complete all as specified and directed. 79 Allas per Srl item No 76 here-in-before butcollection tank of STP 80 Ors complete all as specified and directed. 80 Allas per Srl item No 76 here-in-before butcollection tank of STP 42 Map& Lal Phatak complete all as specified and directed. 81 M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS pipes with one coat of black Japan paint over a coat of Zync Chromate complete incl its MS supports / clamps / nuts / bolts and marking / writing flow arrows and name with white paint by skilled painter Allas directed of 150 - 200mm dia complete all as specified and directed. 82 All as per Srl item No. 81 here-in-before but80 to 100 mm dia complete all as specified and directed. 83 All as per Srl item No.81 here-in-before but 50 mm dia complete all as specified and directed. 84 All as per Srl item No. 81 here-in-before but 25mm dia complete all as specified and directed. 85 S&F in repair and connect, MCB SP 6 to 32 A, AC, 240V, ISI Marked complete all as specified and directed. 86 S&F in repair and connect, Isolator DP, 40A, AC, 240V, ISI Marked complete all as specified and directed. 87 S&F in repair and connect, Isolator 4P, 63A, AC, 415V, ISI Marked complete all as specified and directed. 88 S&F in repairs and connect, Single Phase Preventer suitable for motor protection complete all as specified and directed. 89 S&F in repairs and connect, NO-NC auxiliary contact block suitable for 20 to 40A 3 phase contactors complete all as specified and directed.. 90 S&F in repairstimer suitable for starter complete all as specified and directed. 91 S&F in repairs and connect, over load Relay 3 Phase, 415V, 25 Amp to 40 Amp complete all as specified and directed. 92 S&F in repairs and connect, DOL starter suitable 2 to7.5HP motor, 3 Phase, 415 V, with 1Ø preventer and thermal relays complete all as specified and directed. 93 Allas per Srl item No 92 here-in-before butfor more than 7.5to15HP complete all as specified and directed. 94 S&F in repairs, fully automatic star delta motor starter suitable for 15/ 20HP pumpset, 3 phase, 415 V with relay of suitable rangeincl enclosure complete all as specified and directed.Make : L&T, model No. ML- 4FASD or equivalent of C&S / Legrand complete all as specified and directed. 95 S&F in repairs, 3Pole MCCB 25 -100 Amp, 50 Hz, 415 V with rupturing capacity 18KA with Thermal - Magnetic Release. complete all as specified and directed. 96 All as per Srl item No 100 here-in-before but 4 Pole100-200Amps. 25KA complete all as specified and directed. 97 S&F in repairs, testing Volt meter 0-500 Volts complete all as specified and directed. Make: AE/ Rishab/Meco/Enercon. 98 S&F in repairs, Pressure Gauge, 100/80 mm dia, 0 - 100 lb/Sq inchpressure rating complete all as specified and directed. Make: Lub / Meco / H Guru / Pfizer 99 Supply and fixing ofnon clog sewage submersible pump set, 3HP, 3Ø, AC, 4150V,25 Mtr Head complete all as specified and directed. Make: CG/ Kirloskar / KSB 100 Supply and fixing ofnon clog sewage submersible pump set, 2HP, 1Ø, AC, 240V,complete all as specified and directed. Make: CG/ Kirloskar / KSB 101 Supply only DWPE (Dewatering Polyelectrolyte) powder, pack of 10/25Kg in polythene bags / HDPE drums complete all as specified and directed 102 Supply only AQUAFIT-CHLORINE-65%-70% (Calcium based granular disinfectant for water treatment, more stable than Chlorine gas, and stronger than Bleaching powder, and sodium Hypochlorite) in 45 kg Drums complete all as specified and directed.Make : Sree Rayalaseema HI-Strtength HYPO LTD . 103 Supply only Calcium Hydro-Oxide (Lime, 80-85%) in Powder form as pH Booster for STP water, packing in 40 Kg Packs complete all as specified and directed. 104 Supply only Ortho Tolidin solution for testing of dissolved chlorine in water complete all as specified and directed 105 Supply only Chlorination testing glass test Tube kit complete all as specified and directed 106 Supply only Alum Ferric(Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm Max and arsenic 6 ppm Max) confirming to IS-299/2012 (Revised) as amended upto date complete all as specified and ddirected by Engineer-in-Charge.(Note :- The Alumino Ferric Sulphate shall be supplied in superior quality bricks (slabs) as per IS specifications.Manufacturers Name/trade mark shall be engraved on each brick (slab) in addition to marking of relavant clause of IS specification). 107 M&L for replacementfilteration media of sixdrying bed with ten layer of sand gravals and stone gravels as per existing all as specified and directed 108 Supply only bacteria culture areobicin 30 Kg of drum complete all as specified and directed. 109 Supply only DAP fertiliser for day to day use in sewage treatment plant complete all as specified and directed. 110 Supply only molassesfor day to day use in Sewage treatment plant complete all as specified and directed. 111 Supply only PAC (Poly Aluminium Chloride AC 1005 in organic soluable Polymer Powder packed in 25 Kg Poly bags completed all as specified and directed. 112 M&L for testing of treated sewage water from out letof chlorine contact tank once in every threemonths from NABL accredited authorized lab as per IS 3025 forrecording essential parameters such as BOD, COD, PH, suspended solids and total dissolved solids complete for STP JRC , 80 OR,MH and 42 Map and Lal Phatak all as specified & directed. 113 Supply only compressor oil 320 grade complete for top up oil levelall as specified and directed . 114 Supply and fix in replacement u/s selector switchcomplete 230 volt complete all as specified and as directed. Make L&T/Kaycee 115 Supply & fix in repairpush buttonswitch with mounting adaptor complete 230 volt complete all as specified and as directed. Make-L & T/Kaycee./BCH 116 M&L for cleaning panel bdbusbar and de carbounising of panel board and replacement of unsv parts including wiringand testing complete all as specified and as directed. 117 M&L for taking outunserviceable Air diffuser andreplacement with new one air diffuser complete as per existingall as spefified and directed 118 M&L for complete overhauling and repairing of cake formation Machine and airCompressor of capacity upto 5 HPand all the connection of chemicalmixerincluding other connected assessories as required at site for STP JRC Capacity of 1 MLDas specified and directed.Note:- 1. Payment will be made aftertesting of forming of cake 119 Supply and fixing ofFilter press Plate as per existing size in Cake formation machine complete all as specified and directed 120 Supplying and fixing in repair Switch Gear Change over of 400 Amps 3 Pole 415 volts complete all as specified and directed 121 Supplying and fixing Contactor 40-50 Amps3 phase Volts all as specified and directed 122 M&L for taking out floating wasteplastic and other particles from collection tanks of STPs as and when required and directed by Engr-in-charge and disposing them out of the cantonment area in waste dumping area 123 M&L for Disconnection flange of MS pipe and replacement of rubber packing to arrest the leakage of 50mm to 100 mm all as specified and directed 124 Supply and laying or fixing or passing throughpipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed mmnominal cross section inservice connections of 3 core of 10 sqmm stranded conductor type. 125 M&L for Cleaning ,sweeping, ofopen area of STP JRC and furniture yardSump, 42 STP, MH STP, 80 OR STP includingcleaning of installed machinary at both STPs and Cleaning / Cutting of bushes , grass, vegetation trimming of tree branches , surface dressingof STPopen area , Drying Bed, open drain, and removing the wasteoutside the cantonment areaNote : Rate quoted shall deemed to be inclusive of leveling the uneven surface using suitable machine or manually as per ground requirement and spreding weed killerafter cleaning on complete area usingspray machine 126 Taking out of booster pump from foundation/electric motor manually ormachnically and transporting to workshop for repair and back to site incl reinstallation refixing and reconnecting after necessary repair complete all as specified and as directed. Note :- Repair/Replacement of unserviceable parts will be measured and paid under relevent items 127 S&F in repair of Star coupling suitable for 2HP multi stage pump set, complete all as specified and as directed.MAKE:- NE or equivalent as approved by GE 128 S&F in repair of GM impeller for booster pump motor ,3 phase 415 v, 2HP/3HP capacity complete all as specified and as directed. 129 Supply, installing, testingand commissioning Factory made outdoor LT feeder piller box, double door type of suitable size, padestal mounted, CPRI approved totally enclosed, dust and vermin proof, Front and rear openable type made of 3 mm thick CRCA sheet and having proper locking arrangement duly paintedto both internal and External surfaces with super enaleled paint over a coat of red oxide and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising ofthree phase copperbusbarr of current carrying capacity 200 Ampsmounted on angle iron legs of size 50 x 50 x 6 mm x 80 cm long embedded inPCC 1:3:6,including excavation / preparation of ground complete connecting UG cable with cable glands of suitable size Make :SMS Panels and Switch Gears/ Universal switch gears Control and equivalent 130 ( a)3 pole power contactor type ML 4 suitable for operation on,440 Volts, AC, 50 Hz-06 Nos(b) over load protection relaywith relay range 45-75Asuitable for operation on 3 phase, 415 V-02 Nos(c)voltmeter three phase anologue typeclass 1 voltage range 0-500 V flush mounting 96x96mm(d)ammeter three phaseanologue type 5A class 1 ofrange 0-200 A flush mounting 96x96mm inculding CT 200/5(e)MCCB 100A , 25 KA Adjustable type 3 pole for 415V -02 Nos(f) Supply and fix in repair MCCB 200 A capacity 4 pole, 35 KAfor 415V -01Nos(g) indicating lamp on all 3 phases R Y B -01 set(h) PVC insulated multistranded copper conductor single core cable 4 sq mm (Nominal cross sectional area) as per site requirement including suitable size of copper lugs etc all as specified and directed-01 Job(j) single phase preventer direct mounting type with relay range 28-40 A 230 Volts suitable for electric motor of water supply installation-02 Nos(k)Electronic timer type ST 100 suitable for operation on 240/360/415 volts 50 Hz for 3-10 Sec-02 Nos.(l) Automatic phase corrector 131 Supply and fix in repair energy saving and environemntal friendly long life versatile pressure die-cast aluminium IP-65 roadway luminaire 72W LEDfitting with high power LEDs light source and electronic driver etc complete as specified and directed 132 Supply and fix 35 W new generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aestheticallydesigned with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. clear cover offers bright illumination for different applications. 133 S & F in replacement of street light brackets 40 mm bore GI pipe medicum grade upto 1.5 mtr long bend to shape including flat iron clamps and sutable nuts and bolts .etc complete all as specified and directed 134 M&L forshifting and emptying chlorine Gas cylinderof any size and capacityby trained and experience personnel in handling the chlorine gas incl taking all safety measuresandappropriate tools andeqptrequired to safeguard the area and technician while emptying the cylinderand arranging all material and chemicalto neutralize the chlorine gas incase of leakage complete all as specified and directed 135 S&F Bldg Security light energy efficient 1X20 Watt LED 6K Endura cityliner leaf (with Toughned glass) die cast aluminium and fixing arrangement of fitting including 1 mtr 35/50mm GI 90 degree bend pipe complete all as specified. 136 M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plateupto external faceof the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia@ 150 mm c/c both ways with 10 mm dia mild steel bars as in liftinghandle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt). 137 Supply fixing testing and commissioning copper submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 138 All as per item ser no. 137here-in-before but of size 6 Sqmm complete all as specified and directed 139 Supply fixing testing and commissioning submersible cable flat 2.5 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 140 Supply, installation, commissioning and testing in replacement of APFC panel of capacity 40 KVAR (20 KVAR X1,10 KVAR X 1,5 KVAR X 2)powder coated factory made outdoor type of suitable size made ofCRCA sheetmade from min 3.15 mm thick sheet CPRI manufactureswith countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay complete panel prewired with suitable size of copper cable not less than 2.5 sqmm and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, PCC (1:2:4) type C-1 with 20mm graded stone aggregate.Panel comprising with following:- 141 (a) Incoming MCCB 4 pole 100 Amp 16 KA alongwith Spreader terminals with adjustable thermal setting– 01 Nos(b) Multifunctional 4 in 1 meter like Amp,Voltage, frequency, powerfactor as per capacity of panel = 01 No.(c) Phase Indicator Lamp RYB with sheds LED Type - 01 Set of three(d) Capacitor MPPH type with suitable size 3 phase power contactors and with individual 3 pole 415 volt MCBs of suitable capacity including indication lamp of each capacitor.(e) Microprocessor based 3 phase current transformer sencing relay 4 stage = 01 No( for operating of capacitor bank)(f) Auto/Manually switch of capacitor bank(g) PCC 1:2:4 for installation of panel 142 Supply and fixing all in one solar LED street light IP66 with high efficiency mono crystaline solar panel PV module not less than 12V, 25W lithium ferro phosphate battery with in-built BMS technology, capacity 12.8V, 10.5 Ah high efficiency LED 100LM/W, MPPT solar charge controller and aluminium extruded body & is specially programmed to automatically control the dimming and brightness of light, which increase the backup time and minimum 10 Hrs backup. 143 Dismantling and Taking Out old U/S LT Busbar chamber and Supply, installation, Commissioning and testing LT Busbar chamber,size of 600x600x400 mm for 3 phase, 6 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 25mm x 25mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement and including PCC work for fixing panel legsand bus bar of Copper conductor suitable shape and size , 6 No of 200 amps rating including taking out end connectinons of the existing cablesand fixing the cable with the panelusing new lugs and glands of suitable size. 144 Supplying, installing, testing, commissioningofmonoblock Horizontal Filter Feedpumps 5 HP Complete in CI body& CI impeller with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply .Pumps = 02 Nos.(1w + 1s)Flow rate (each)= 20 m³/hrHead = 25 - 30 m 145 Supply and fixing in replacement of non clog type of submersible pump set with motor of capacity 12.5 HP, 415V, 50 Hz, discharge 1000 LPM and head 40 Mtrall as specified and directed by Engr-in-charge.Note:- Old unsv pumpset with motor will be deposited in MES store. 146 Supply & laying/fixing Floor & Trench,3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size:- 147 (a) PN-16, 50 mm OD (SDR– 7.4) 148 (b) PN-16, 32 mm OD (SDR– 7.4) 149 (c) PN-16, 50 mm OD (SDR– 7.4) 150 M&L for repair/rectification of leakage/blockageto water supply distribution lines 50/80mm bore of GI/HDPE/PPR/PVC tubing by necessary excavatio , returning /filling as required , including replacement of,elbow, socket, nipple, D joint, welding as per site requirementas required complete all asdirected. 151 S&F in replacement PPR gate valve (brass insert) of size 50 mm bore including connection and testing complete all as directed. 152 M&L for attendingelect and mechanical breakdownof sewage submersible pump sets, monoblock pump set, Air compressor and electric break downas and when any breakdown occurred .The contractor shall provide the technician within2 hrs after breakdown of Submersible and monloblock pump sets and motor, starter, incase of failure for non attending complaint a penalty of 2000 per compaint will be imposed complete all as directed. Note : Rates quoted shall be inclusive of draining out the collection tank and lifting and lowering pumpset for checking and inspecting the submersible pump set andmaking functional 153 M&L for providing and lowering, connecting submersible pump set 5 to12.5 HP for drainingout the collection tank during the unserviceability of existing pump set including connectingdrain pipe cable etc as per site requirement complete all as directed. 154 Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope / gradient forlaying cables/ pipes etc.all as specified and directed including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed.Note : Excavation shall be made carefully in order to avoid damage of existing cables/pipes and protection covers. 155 Returning, filling in including spreading, leveling, watering and well ramming in layers of25 cm thickafter the cables etc. are laid, jointed & tested complete all as specified and directed 156 Removal of surplus excavated soilexc. 50 mtr butn. exc. 250 mtr distance and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all as directed. 157 Supply and fixing in replacement of PVC suction currugated hose pipe with flanged ends of green colourof bearing capacity 2500 Pa, temperature range 0deg-100deg and velocity 30-40 m/s of foloowing size all as specified and directed by Engr-in-Charge. 158 (a) 50 mm bore 159 (b) 80 mm bore
Contract Date: Dec 16, 2025 Contract Value : ₹ 32.15 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
42.
Petroleum and Natural Gas #8436902 AOC
Annual Rate Contract For Civil And Other Miscellaneous Maintenance Works At Wrpl Beawar And Sendra Station=10 NRECIV0001: Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots a nd polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. 20 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 30 NRECIV0003: Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the a rea clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall b e measured). 40 NRECIV0004: Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water wi th wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete as per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with clea ning powder,paint remover as per requirement all labour, material etc.complete. 50 NRECIV0005: Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, c leaning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with all labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 60 NRECIV0006: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane not exceeding 1.00 sq.m in area 70 NRECIV0007: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane exceeding 1.00 sq.m in area 80 NRECIV0008: Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Exec utive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, segregate the waste into biodegradable & non bio-degradeable waste and finally dispose themseparately at designated place (Dumping Yard/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc . complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to wo rkmen, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engi neer-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepe rately. The unit MONTH (MON) shall mean per house/building per month 90 NRECIV0009: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain upto 2.0 sqm. 100 NRECIV0010: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 2.0 sqm. and upto 4.0 sqm. 110 NRECIV0011: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 4.0 sqm. and upto 10.0 sqm. 120 NRECIV0012: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 10.0 sqm and upto 15.0 sqm. 130 NRECIV0013: Labour charges for cleaning and dechoking of the nahani trap, gully trap and inspection chambers alongwith the CI and S W pipe connection of house drainage including flushing, removal of sludge muck outside all labour, tools etc. complete. The contract or has to clean the line from Nahani trap upto inspection chamber or vice-versa complete. 140 NRECIV0014: Cleaning and removing choking from existing rain water pipe including removing the shoe or grating if necessary & fixin g the same without damaging & fitting of specials all labour etc.complete. Up to 5 mtr. Height 150 NRECIV0015: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth upto 2.0 M 160 NRECIV0016: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 170 NRECIV0017: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 3.0M 180 NRECIV0018: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth upto 2.0 M 190 NRECIV0019: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 200 NRECIV0020: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 3.0M 210 NRECIV0021: Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compres sed air, steaming etc. removal of oily muck outside the chamber completed upto 100M lead. The item includes transportation of all ma chinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. 220 NRECIV0022: Cleaning, dechoking and flushing 100mm/ 50mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sew er cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of the Engineer-in-Charge. 230 NRECIV0025: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Upto a lead of 1 km 240 NRECIV0026: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 1 km but upto 2 km 250 NRECIV0027: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 2 km but upto 3 km 260 NRECIV0028: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Upto a lead of 50 m. 270 NRECIV0029: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. 280 NRECIV0030: Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driv er, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Eng ineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit EACH (EA) stands for tractor days. 290 NRECIV0031: Edging with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, laid dry length wise, including requ ired excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50m. 300 NRECIV0038: Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of th e establishment, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroa ches, mosquitoes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide ba its, glue trays, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trench es upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, c onsumables etc complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when required as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designate d by EIC. Rate is For (PER SQM PER MONTH) 310 NRECIV0039: Lifting, shifting, loading, unloading on of heavy equipment / material etc etc with the help of hydra/crane etc (Min 12T ) including all accessories like belt, sling etc as per directions of EIC/ Site- Engineer. (Unit EA shall mean carrying out abov e activities for 8 hrs. a day). 320 NRECIV0040: Hire and running charges of loader. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 330 PJEALU2634: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubul ar sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM ru bber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever require d including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per arc hitectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separat ely] : 340 PJEALU2636: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 350 PJEALU2637: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 360 PJEALU2638: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 370 PJEALU2639: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixi ng of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for sepa rately] : 380 PJEALU2640: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 390 PJEALU2641: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 400 PJEALU2642: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 410 PJEALU2650: Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, havin g brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cut ting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. : 420 PJEALU2651: With stainless steel cover plate minimum 1.25 mm thickness 430 PJEALU2652: With brass cover plate minimum 1.25 mm thickness 440 PJEALU2685: Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by pr oviding weather/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and dir ections of the Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : 450 PJEALU2686: Up to 5 mm depth and 5 mm width 460 PJEALU2687: Up to 10 mm depth and 10 mm width 470 PJEALU2688: Up to 20 mm depth and 20 mm width 480 PJEALU2689: Providing and fixing, on fixed glazing/ doors/ window panes, sun control film HP NATURAL 35 SAFETY COMBINATION FILM-4Mi l of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturers specification and as per directions of the Engineer-in-Charge. 490 PJECLA0192: Marble work gang saw cut (polished and machine cut) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marb le of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 ceme nt : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment t o match the marble shade [Note: To be secured to the backing by means of cramps, which shall be paid for separately] : 500 PJECLA0193: Area of slab up to 0.50 sqm 510 PJECLA0194: Area of slab over 0.50 sqm 520 PJECLA0195: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 530 PJECLA0196: Area of slab up to 0.50 sqm 540 PJECLA0197: Area of slab over 0.50 sqm 550 PJECLA0198: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone sl ab of colour black, Cherry/Ruby red for kitchen platforms, vanity counters, window sills, facias and similar locations of required s ize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with जोधर्पुर matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 560 PJECLA0199: Area of slab up to 0.50 sqm 570 PJECLA0200: Area of slab over 0.50 sqm 580 PJECLA0201: Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edg e to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge : 590 PJECLA0202: Marble work 600 PJECLA0203: Granite work 610 PJECLA0206: Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete. 620 PJECLA0220: Providing and fixing machine cut, mirror/ eggshell polished Italian Marble stone slab (Perlato, Rosso verona, Fire Red o r Dark Emperadore etc.) of 18 mm thickness for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 c ement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 Kg/sq.m. including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directe d by the Engineer-in-Charge : 630 PJECLA0221: Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional h eight of 3 m or part thereof. 640 PJECLA0222: TILE WORK IN CLADDING : 650 PJECLA0223: Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the ma nufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-i n-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. 660 PJECON0069: CEMENT CONCRETE (CAST IN-SITU) : 670 PJECON0070: Providing and laying in position cement concrete of specified grade at all depths including ramming & shuttering etc. c omplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directio n of Site Engineer: 680 PJECON0071: 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal siz e derived from natural sources] 690 PJECON0072: 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources] 700 PJECON0074: 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size de rived from natural sources] 710 PJECON0078: Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) deriv ed from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] laid to proper level & line incl uding providing shuttering & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per sq uare metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd direction of Site Engineer. 720 PJECON0080: Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal siz e, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specificatio ns and directions of the Engineer-in-Charge. 730 PJECON0082: Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manuf acturers specification. [Note: Unit KG shall mean PER BAG OF 50 KG OF CEMENT]. 740 PJECON0085: Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centerin g, shuttering and finishing: 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 2 0 mm nominal size derived from natural sources] 750 PJECON0087: Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, ancho r blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mort ar 1:3 (1 cement : 3 coarse sand), cost of required centering complete: 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources] 760 PJECON0088: Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] 770 PJEDIS1159: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per th e directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same s hall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : 780 PJEDIS1160: Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 790 PJEDIS1161: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 800 PJEDIS1162: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mat erial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift o nly & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be d one prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] 810 PJEDIS1163: Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mate rial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of n ecessary covers/ barricades around the work area shall be done prior to dismantling operations] 820 PJEDIS1164: Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engine er-in-Charge. [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by th e Engineer-in-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work] 830 PJEDIS1165: Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 840 PJEDIS1166: Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and d isposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall b e allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades aro und the work area shall be done prior to dismantling operations] 850 PJEDIS1168: Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable materi al and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. 860 PJEDIS1171: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc . complete and stacking within 50 metres lead : 870 PJEDIS1172: Of area 3.0 sq. metres and below 880 PJEDIS1173: Of area beyond 3.0 sq. metres 890 PJEDIS1177: Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in : 900 PJEDIS1178: Rolled Steel Joists 910 PJEDIS1179: Channels, angles, tees and flats 920 PJEDIS1181: Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 me tres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantlin g operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge .] 930 PJEDIS1185: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : 940 PJEDIS1186: For thickness of tiles 10 mm to 25 mm 950 PJEDIS1187: For thickness of tiles above 25 mm and up to 40 mm 960 PJEDIS1188: Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unservicea ble material within 50 metres lead. 970 PJEDIS1190: Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable ma terial within 50 metres lead. 980 PJEDIS1191: Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 990 PJEDIS1192: Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : 1000 PJEDIS1193: G.S. Sheet 1010 PJEDIS1194: Asbestos Sheet 1020 PJEDIS1198: Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 1030 PJEDIS1200: Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : 1040 PJEDIS1201: Thickness up to 40 mm 1050 PJEDIS1202: Thickness above 40 mm up to 75 mm 1060 PJEDIS1204: Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres l ead : 1070 PJEDIS1205: 75 to 80 mm dia pipe 1080 PJEDIS1206: 100 mm dia pipe 1090 PJEDIS1207: 150 mm dia pipe 1100 PJEDIS1208: Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable mater ial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift onl y & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be don e prior to dismantling operations.(3) Adequate safety precautions shall also be taken care before commencement of any activity] : 1110 PJEDIS1209: Water Bound Macadam Road 1120 PJEDIS1210: Bituminous Road 1130 PJEDIS1211: Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1140 PJEDIS1212: 15 mm to 40 mm nominal bore 1150 PJEDIS1213: Above 40 mm nominal bore 1160 PJEDIS1214: Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical m eans breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per the directions of Engineer-in-Charge : 1170 PJEDIS1215: Up to 150 mm diameter 1180 PJEDIS1216: Above 150 mm dia up to 300 mm dia 1190 PJEDIS1217: Above 300 mm diameter 1200 PJEDIS1221: Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manual ly/ by mechanical means and stacking the pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1210 PJEDIS1222: Up to 150 mm diameter 1220 PJEDIS1223: Above 150 mm diameter 1230 PJEDIS1224: Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metre s lead as per the directions of Engineer-in-Charge. 1240 PJEDIS1228: Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 1250 PJEDIS1232: Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 1260 PJEDIS1233: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1270 PJEDIS1234: Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservic eable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. 1280 PJEDIS1237: Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved. 1290 PJEDRA2505: Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Kg 1300 PJEDRA2506: Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : 1310 PJEDRA2507: Light Duty-2.5 : 1320 PJEDRA2508: Rectangular shape 600x450 mm internal dimensions 1330 PJEDRA2509: Square shape 450 mm internal dimensions 1340 PJEDRA2510: Circular shape 450 mm internal diameter 1350 PJEDRA2511: Medium Duty-10 : 1360 PJEDRA2512: Square shape 450 mm internal dimensions 1370 PJEDRA2513: Circular shape 500 mm internal diameter 1380 PJEDRA2514: Heavy Duty-20 : 1390 PJEDRA2515: Circular shape 560 mm internal diameter 1400 PJEDRA2516: Extra Heavy Duty-35 : 1410 PJEDRA2517: Circular shape 560 mm internal diameter 1420 PJEDRA2518: Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both si des with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels fo r the drain etc. complete : 1430 PJEDRA2519: For pipes 100 to 250 mm diameter 1440 PJEDRA2520: For pipes 250 to 300 mm diameter 1450 PJEDRA2521: For pipes 350 to 450 mm diameter 1460 PJEDRA2550: Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floor s, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materi als, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 1470 PJEDRA2551: Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure coppe r floats, complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications a nd directions of the Engineer-in-Charge. 1480 PJEDRA2553: Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i ncluding making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat c ement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per s tandard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling , curing etc., as per specifications and directions of the Engineer-in-Charge. 1490 PJEDRA2588: Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL shall mean KILO LITRE] 1500 PJEDRA2589: Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, a ll as per the directions of Engineer-in-Charge. 1510 PJEDRA2590: Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting s ewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including ski lled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking an d flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up t o 300 mm dia for all depth. 1520 PJEEAR0002: Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) i n all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Ch arge. 1530 PJEEAR0004: Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. including filling in sid es of foundation trenches, plinth etc. with the excavated earth available and/or depositing the excess earth within station area l imits, in layers not exceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing to level and grade , complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tion of Site Engineer. 1540 PJEEAR0005: In all kinds of soil 1550 PJEEAR0006: In Ordinary rock 1560 PJEEAR0009: Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractors own borrow areas including royalty, with all leads and lifts in trenches, plinth, sides of foundation etc. including watering, compacting in layers not exceed ing 20cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specif ications and direction of Site Engineer. 1570 PJEEAR0011: Supplying and filling coarse sand under floors, in foundations and plinth including cost-of sand, royalty, transportatio n, loading , unloading, spreading in layers not exceeding 20 cm., watering, ramming, compacting, dressing and levelling etc. compl ete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1580 PJEEAR0013: Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment]. 1590 PJEEAR0014: Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including deli very as specified. 1600 PJEEAR0015: Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 1610 PJEEAR0016: Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : 1620 PJEEAR0017: Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. : 1630 PJEEAR0020: Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based soluti on) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same : 1640 PJEEAR0021: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measu red at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 1650 PJEEAR0022: Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 1660 PJEEAR0023: Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, r emoving the roots and stacking of serviceable material and disposal of unserviceable material : 1670 PJEEAR0024: Beyond 30 cm girth upto and including 60 cm girth 1680 PJEEAR0025: Beyond 60 cm girth upto and including 120 cm girth 1690 PJEEAR0026: Beyond 120 cm girth upto and including 240 cm girth 1700 PJEEAR0027: Above 240 cm girth 1710 PJEEAR0028: Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for a ll lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having dire ctions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] 1720 PJEEAR0030: Excavating trenches by mechinical / manual means of required width in all kinds of soil for pipes, cables, etc. includin g excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and th en returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : 1730 PJEEAR0031: Pipes, cables etc. not exceeding 80 mm dia. 1740 PJEEAR0032: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 1750 PJEEAR0033: Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 1760 PJEEAR0034: Excavating trenches of required width in ordinary rock for pipes, cables, etc. including excavation for sockets, getting out the excavated materials, returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. , stacking servicable materials for measurements and disposal of unservicable materials, all work up to any lead & lift as directed by the Engineer-in-Charge : 1770 PJEEAR0035: Trench depth upto 1.5m : 1780 PJEEAR0036: Pipes, cables etc. not exceeding 80 mm dia 1790 PJEEAR0037: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1800 PJEEAR0038: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1810 PJEEAR0039: Trench depth exceeding 1.5 m but not exceeding 3 m: 1820 PJEEAR0040: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1830 PJEEAR0041: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1840 PJEEAR0042: Trench depth exceeding 3 m but not exceeding 4.5 m: 1850 PJEEAR0043: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1860 PJEEAR0066: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceedin g 20 cm in depth, consolidating each deposited layer by ramming and watering, all works up to any lead and lift 1870 PJEFIN0898: CEMENT PLASTER (IN FINE SAND) : 1880 PJEFIN0899: 12 mm cement plaster of mix : 1890 PJEFIN0900: 1:4 (1 cement : 4 fine sand) 1900 PJEFIN0901: 1:6 (1 cement : 6 fine sand) 1910 PJEFIN0905: 20 mm cement plaster of mix : 1920 PJEFIN0906: 1:4 (1 cement : 4 fine sand) 1930 PJEFIN0907: 1:6 (1 cement : 6 fine sand) 1940 PJEFIN0908: CEMENT PLASTER (IN COARSE SAND) : 1950 PJEFIN0909: 12 mm cement plaster of mix : 1960 PJEFIN0910: 1:4 (1 cement : 4 coarse sand) 1970 PJEFIN0911: 1:6 (1 cement : 6 coarse sand) 1980 PJEFIN0915: 20 mm cement plaster of mix : 1990 PJEFIN0916: 1:4 (1 cement : 4 coarse sand) 2000 PJEFIN0917: 1:6 (1 cement : 6 coarse sand) 2010 PJEFIN0918: CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 2020 PJEFIN0919: 12 mm cement plaster finished with a floating coat of neat cement of mix : 2030 PJEFIN0920: 1:3 (1 cement : 3 fine sand) 2040 PJEFIN0921: 1:4 (1 cement : 4 fine sand) 2050 PJEFIN0925: Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement : 2060 PJEFIN0926: 12 mm cement plaster 2070 PJEFIN0927: 20 mm cement plaster 2080 PJEFIN0942: Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufactu rers [Note: Unit BAG shall mean PER BAG OF 50 KG CEMENT USED IN THE MIX). 2090 PJEFIN0943: Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or par t thereof. 2100 PJEFIN0944: Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and s mooth complete. 2110 PJEFIN0945: Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Colum ns/ Beams brickwork as directed by the Engineer-in-Charge. 2120 PJEFIN0963: Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved ma nufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and inc luding water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2130 PJEFIN0964: EXTERIOR FINISHING : 2140 PJEFIN0965: Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 Kg/10 sq m) 2150 PJEFIN0966: Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 2160 PJEFIN0967: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2170 PJEFIN0968: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2180 PJEFIN0969: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifica tions : 2190 PJEFIN0970: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm 2200 PJEFIN0971: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. 2210 PJEFIN0972: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm ov er an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. 2220 PJEFIN0973: Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon ad ditives: New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 2230 PJEFIN0974: Applying priming coat : 2240 PJEFIN0975: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 2250 PJEFIN0976: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2260 PJEFIN0977: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 2270 PJEFIN0978: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specification s including appropriate priming coat, preparation of surface, etc. complete : 2280 PJEFIN0979: On steel work 2290 PJEFIN0980: On concrete work 2300 PJEFIN0981: Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 2310 PJEFIN0982: 75 mm diameter pipes 2320 PJEFIN0983: 100 mm diameter pipes 2330 PJEFIN0984: 150 mm diameter pipes 2340 PJEFIN0985: Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats) 2350 PJEFIN0986: Providing and applying two coats of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat inclu ding preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 2360 PJEFIN0987: Coal tarring two coats on new work using 0.16 Litre and 0.12 Litre coal tar per sqm in the first coat and second coat re spectively. 2370 PJEFIN0988: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2380 PJEFIN0989: Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2390 PJEFIN0990: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or mor e coats on new work 2400 PJEFIN0991: Varnishing with varnish of approved brand and manufacture : 2410 PJEFIN0992: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 2420 PJEFIN0993: Two or more coats glue sizing with spar varnish or an under coat of flatting varnish 2430 PJEFIN0996: Lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HEIGH T]. 2440 PJEFIN0997: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2450 PJEFIN0998: Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litr e, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Old work (one or more coats) 2460 PJEFIN0999: Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : 2470 PJEFIN1000: One coat 2480 PJEFIN1001: Two coats 2490 PJEFIN1002: Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : 2500 PJEFIN1003: One coat 2510 PJEFIN1004: Two coats 2520 PJEFIN1005: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : 2530 PJEFIN1006: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 2540 PJEFIN1007: With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. 2550 PJEFIN1008: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair s to scratches etc. complete. 2560 PJEFIN1009: Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2570 PJEFIN1010: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 2580 PJEFIN1011: 75 mm diameter pipes 2590 PJEFIN1012: 100 mm diameter pipes 2600 PJEFIN1013: 150 mm diameter pipes 2610 PJEFIN1014: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of appro ved brand and manufacture and required colour on old work : 2620 PJEFIN1015: 75 mm diameter pipes 2630 PJEFIN1016: 100 mm diameter pipes 2640 PJEFIN1017: 150 mm diameter pipes 2650 PJEFIN1018: Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats) 2660 PJEFIN1019: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 2670 PJEFIN1020: Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work 2680 PJEFIN1021: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or mor e coats on old work 2690 PJEFIN1022: French spirit polishing : One or more coats on old work 2700 PJEFIN1023: Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work 2710 PJEFIN1024: Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HE IGHT]. 2720 PJEFIN1025: Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 2730 PJEFIN1026: Finishing walls with water proofing cement paint of required shade : 2740 PJEFIN1027: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete i ncluding cost of Priming coat. 2750 PJEFIN1028: Old work (one or more coats applied @ 2.20 kg/10 sqm) complete. 2760 PJEFIN1029: Finishing walls with textured exterior paint of required shade 2770 PJEFIN1030: Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 2780 PJEFIN1031: Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 2790 PJEFIN1032: Finishing walls with Acrylic Smooth exterior paint of required shade : 2800 PJEFIN1033: Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface. 2810 PJEFIN1034: Old work (One or more coat applied @ 0.90 ltr/10 sqm) 2820 PJEFIN1035: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 2830 PJEFIN1036: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 2840 PJEFIN1037: Old work (one or more coats applied @ 0.83 ltr/10 sqm) 2850 PJEFIN1038: Varnishing with varnish of approved brand and manufacture : 2860 PJEFIN1039: One or more coats with copal varnish 2870 PJEFIN1040: One or more coats with spar varnish 2880 PJEFIN1041: Melamine polishing on wood work (one or more coat). 2890 PJEFIN1042: Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 2900 PJEFIN1043: Providing Plaster of Paris coating on ceiling as per approved design complete in all respects inclusive of cost of all l abour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 2910 PJEFLO0706: FLOORING : 2920 PJEFLO0707: Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar, including filling the joint s with same mortar, with common burnt clay non modular bricks : 2930 PJEFLO0708: 1:4 (1 cement : 4 coarse sand) 2940 PJEFLO0709: 1:6 (1 cement : 6 coarse sand) 2950 PJEFLO0710: Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, includ ing filling joints with sand, with common burnt clay non modular bricks. 2960 PJEFLO0711: Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class desig nation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 2970 PJEFLO0712: Providing and laying cement concrete flooring 25 mm thick of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreg ates 12.5 mm nominal thickness), laid monolithically over base of concrete in panels at all locations and heights including treads o f steps, nosing, landing slab etc. and finished with a floating coat of neat cement @ 2.20 Kg of cement per sqm of flooring, supplyi ng and fixing 1.5 mm thick aluminium strips for full depth, chequering in floor finish if required, rounding, sloping, curing, finis hing, preparation of slab, steps, etc., complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for base concrete shall be made under relevant item]. 2980 PJEFLO0713: 40 mm thick cement concrete Flooring with P.C.C. of grade mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of step s etc. complete : 2990 PJEFLO0714: Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener c onsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 li tre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosi ng of steps etc. complete. 3000 PJEFLO0715: 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cemen t or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. comple te. 3010 PJEFLO0716: Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick ceme nt concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic con crete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compoun d such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of met allic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge. 3020 PJEFLO0722: TILE FLOORING : 3030 PJEFLO0723: Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : 3040 PJEFLO0724: Light shade pigment using white cement 3050 PJEFLO0725: Medium shade pigment using 50% white cement 50% Grey cement 3060 PJEFLO0726: Dark shade pigment using ordinary cement 3070 PJEFLO0727: Ordinary cement without any pigment 3080 PJEFLO0728: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali r esisting mortar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcation s and directions of the Engineer-in-Charge : 3090 PJEFLO0729: In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3100 PJEFLO0730: In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3110 PJEFLO0731: MARBLE STONE FLOORING : 3120 PJEFLO0732: Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by the Engineer-in-Charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 3130 PJEFLO0733: Makrana White Second Quality 3140 PJEFLO0734: Raj Nagar Plain 3150 PJEFLO0735: Agaria White 3160 PJEFLO0736: Black Zebra 3170 PJEFLO0737: Udaipur Green Marble 3180 PJEFLO0738: Pink Plain Marble 3190 PJEFLO0742: Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab (Perlato, Rosso verona, Fire Re d or Dark Emperadore, etc.) flooring laid in required pattern in linear portion of the building all complete as per architectural dr awings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jo inted with white cement slurry @ 4.4 Kg/sq.m., including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 3200 PJEFLO0743: Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstrac t etc.) and in patterns in combination with Italian marble stone slabs (Perlato, Rosso verona, Fire Red or Dark Emperadore, etc.) of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectu ral drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 Kg/sq.m. including pointing with white cement slurry admixed with pigment to match the ma rble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 3210 PJEFLO0744: Providing and laying natural Rajnagar White Marble tile strips 50 mm wide in flooring/ stairs laid over 20 mm thick ceme nt mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per d rawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3220 PJEFLO0745: GRANITE STONE FLOORING : 3230 PJEFLO0746: Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) floori ng in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointe d with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and poli shing etc. all complete as specified and as directed by the Engineer-in-Charge. 3240 PJEFLO0747: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear p ortions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base o f cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed wit h pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer- in-Charge. 3250 PJEFLO0748: Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 3260 PJEFLO0749: Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red 3270 PJEFLO0750: Providing and laying natural granite stone tile strips 50 mm wide in flooring of approved shade laid over 20 mm thick ce ment mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3280 PJEFLO0761: VITRIFIED FLOOR TILES : 3290 PJEFLO0762: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mort ar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement a nd matching pigments etc., complete : 3300 PJEFLO0763: Size of Tile 500x500 mm 3310 PJEFLO0764: Size of Tile 600x600 mm 3320 PJEFLO0765: Size of Tile 800x800 mm 3330 PJEFLO0766: Size of Tile 1000x1000 mm 3340 PJEFLO0767: Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, includin g grouting of joints. [Note: Payment for grouting of joints shall be made separately] : 3350 PJEFLO0768: Size of Tile 500x500 mm 3360 PJEFLO0769: Size of Tile 600x600 mm 3370 PJEFLO0770: Size of Tile 800x800 mm 3380 PJEFLO0771: Size of Tile 1000x1000 mm 3390 PJEFLO0772: Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by th e Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours an d shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. L aying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3400 PJEFLO0773: Size of Tile 600 x 600 mm 3410 PJEFLO0774: Size of Tile 600 x 1200 mm 3420 PJEFLO0775: Size of Tile 800 x 800 mm 3430 PJEFLO0776: Size of Tile 800 x 1600 mm 3440 PJEFLO0777: Size of Tile 1000 x 1000 mm 3450 PJEFLO0778: Providing and laying Glazed Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manuf acturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shade s, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including groutin g the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying o f tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placin g the tiles gently and easily : 3460 PJEFLO0779: Size of Tile 600 x 600 mm 3470 PJEFLO0780: Size of Tile 600 x 1200 mm 3480 PJEFLO0781: Size of Tile 800 x 800 mm 3490 PJEFLO0782: Size of Tile 800 x 1200 mm 3500 PJEFLO0783: Size of Tile 1200 x 1200 mm 3510 PJEFLO0784: Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including g routing the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. La ying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3520 PJEFLO0785: Size of Tile 600 x 600 mm 3530 PJEFLO0786: Size of Tile 600 x 1200 mm 3540 PJEFLO0787: Size of Tile 800 x 800 mm 3550 PJEFLO0788: Size of Tile 800 x 1200 mm 3560 PJEFLO0789: Size of Tile 1200 x 1200 mm 3570 PJEFLO0790: Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorpti on less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm th ick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : 3580 PJEFLO0791: Size of Tile 500x500 mm 3590 PJEFLO0792: Size of Tile 600x600 mm 3600 PJEFLO0793: Size of Tile 800x800 mm 3610 PJEFLO0794: Size of Tile 1000x1000 mm 3620 PJEGEN2809: GENERAL WORKS : 3630 PJEGEN2816: Supply, installation, testing & commissioning of Turbo Roof Air Ventilators of Fan Size- 24 inch (neck/ throat dia.), Ve ntilator Diameter- 30 inch, Ventilator Base (FRP)- standard width 1.8m x dome height 750mm, Opening for ventilation dome- 860mm x 68 0mm x 608mm, thickness 2mm etc. complete in all respects and as per specifications and directions of the Engineer-in-Charge. 3640 PJEGEN2821: Providing and erecting 2.0 metre high temporary barricading at site; each panel of size 2.5m x 2.0m made of 40x40x6mm an gle iron or 50x50x3mm hollow MS tube posts/ horizontal members/ bracings covered with 1.63mm thick MS Sheet. The steel shall be fixe d with 30x5mm MS flat by suitable welding/ riveting. The panels shall be made so that gap of 50cm above the ground is available maki ng overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of E ngineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The ba rricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for da mages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be r emoved without prior approval of the Engineer-in-Charge. [Note: One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on co mpletion of the work]. 3650 PJEGEN2824: Providing and laying Non-Woven Geo Textile Mat NW 300 made from high quality polypropylene fibres having mass of 300 gra ms/ SQ.M of GAYATRI or approved equivalent make inclusive of cost of all labour, materials, tools, tackles etc. as per manufacturer s recommendations and directions of the Engineer-in-Charge. 3660 PJEHOR2827: HORTICULTURE & LANDSCAPING : 3670 PJEHOR2828: Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of ea rth measured in stacks will be reduced by 20% for payment]. 3680 PJEHOR2829: Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge me asured in stacks will be reduced by 8% for payment]. 3690 PJEHOR2830: Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [No te: Volume of cattle manure measured in stacks will reduced by 8% for payment]. 3700 PJEHOR2835: Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 3710 PJEHOR2836: Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material , consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. 3720 PJEHOR2837: Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [ Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR]. 3730 PJEHOR2838: Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then dispo sing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by fi lling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. 3740 PJEHOR2839: Rough dressing the trenched ground including breaking clods. 3750 PJEHOR2840: Flooding the ground with water including making kiaries and dismantling the same. 3760 PJEHOR2841: Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted veg etation. 3770 PJEHOR2844: Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with ro ots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 3780 PJEHOR2845: Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further dep th of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of sta cked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with w ater, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of material s declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Cost of sludge, manure or extra earth shall be paid for separately under relevant item of SOR]. 3790 PJEHOR2846: Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of m anure, sludge or extra good earth if needed shall be paid separately under relevant item of SOR]. 3800 PJEHOR2847: Holes 1.2 m diameter and 1.2 m deep 3810 PJEHOR2848: Holes 90 cm diameter and 90 cm deep 3820 PJEHOR2849: Holes 60 cm diameter and 60 cm deep 3830 PJEHOR2850: Holes 45 cm diameter and 45 cm deep 3840 PJEHOR2851: Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green includin g loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. 3850 PJEHOR2852: Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the gr ass forms a thick lawn, free from weeds and fit for mowing including supply and filling of good earth, if required during maintenanc e period. [Note: The grass and good earth shall be paid for separately under relevant item of SOR] : 3860 PJEHOR2853: In rows 5 cm apart in both directions 3870 PJEHOR2854: With grass Turf 3880 PJEHOR2855: Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with pro per level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the En gineer-in-Charge. 3890 PJEHOR2856: Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light wate ring the same maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge . 3900 PJEHOR2857: Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per directio n of the Engineer-in-Charge (excluding cost of plant & water): 3910 PJEHOR2858: Tree Plant 3920 PJEHOR2859: Shrub Plant 3930 PJEHOR2860: Hedge Plant/ Ground Cover 3940 PJEHOR2861: Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, As hokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days min imum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions o f the Engineer-in-Charge. 3950 PJEHOR2862: Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 c oarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wi res of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specifie d period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge. 3960 PJEHOR2863: Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm 3970 PJEHOR2864: Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm 3980 PJEHOR2873: Filling of the Polythene bags by mixture of good earth and manure in the ratio of 2:1 (2 part of Good Earth and 1 part o f the Manure) and placing the same at appropriate place including supply & providing Polythene bags, all complete as per direction o f the Engineer-in-Charge. [Note:The Good Earth & Manure shall be paid separately under relevant item of SOR]. 3990 PJEHOR2874: Polythene bags size 12.5 cm diameter & 17.5 cm height 4000 PJEHOR2890: Edging with common burnt clay F.P.S (non modular) bricks of class designation 7.5, laid dry length wise including requir ed excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within any lead. 4010 PJEHOR2894: Providing & fixing of White River (Stone) Pebbles size of 2 to 2.50 dia in natural colour at site of work including lo ading, unloading, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. 4020 PJEHOR2895: Providing and fixing of TUFLEX Garden Fencing Hexagonal Net or approved equivalent of green colour (Weight 510 (+/-8%) g rams/SQ.M) in width of 60 cm with bamboo of 90 cm length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm below ground level and 60 cm above ground level at a distance of 1.50 metres. The n et and bamboo should be binded with 2 mm G.I. wire at three places properly as per directions of the Engineer-in-Charge. 4030 PJEHOR2896: MAINTENANCE WORKS 4040 PJEHOR2897: Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing t he same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds an d fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or m anure. [Note: The good earth shall be paid for separately under relevant item of SOR]. 4050 PJEHOR2898: Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and a pplying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4060 PJEHOR2899: Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manur ing and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Ch arge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4070 PJEHOR2903: Pruning, trimming, shaping of trees/ shrubs (height 15 feet above) and removal of cut materials up to 50m lead inclusi ve of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 4080 PJEHOR2904: Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation water at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering inclu ding cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 4090 PJEHOR2905: Anti-termite treatment of trees by digging holes 30 cm deep & 4 cm dia, 6 to 7 holes around the tree using chemical emul sion (Chlorpyriphos 20% EC in the ratio of 1% concentration) at the rate of 1.5 liter per hole in two time or more application to ge t the trees free from termite infection, complete as per directions of the Engineer-in-Charge. [Note: Unit EA shall mean EACH TRE E]. 4100 PJEHOR2908: Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, deb ris, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per dire ction of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 4110 PJEHOR2909: Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km l ead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP] . 4120 PJEMAS0143: MASONRY WORK : 4130 PJEMAS0144: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : 4140 PJEMAS0145: Cement mortar 1:4 (1 cement : 4 coarse sand) 4150 PJEMAS0146: Cement mortar 1:6 (1 cement : 6 coarse sand) 4160 PJEMAS0147: Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : 4170 PJEMAS0148: Cement mortar 1:4 (1 cement : 4 coarse sand) 4180 PJEMAS0149: Cement Mortar 1:6 (1 cement : 6 coarse sand) 4190 PJEMAS0150: Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth le vel up to floor V level in all shapes and sizes in : 4200 PJEMAS0151: Cement mortar 1:4 (1 cement : 4 coarse sand) 4210 PJEMAS0152: Cement mortar 1:6 (1 cement : 6 coarse sand) 4220 PJERAI2738: Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required th ickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4230 PJERAI2739: Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing lay er of boulders, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4240 PJERAI2740: Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4250 PJERAI2742: Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, o f size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all a s per directions of the Engineer-in-Charge. 4260 PJEREI0090: RCC (CAST IN-SITU) : 4270 PJEREI0091: Providing and laying structural reinforced cement concrete work (1:1.5:3) conforming to IS:456 (1 cement : 1.5 coarse sa nd : 3 graded stone aggregate 20 mm nominal size) at all heights and depth for construction of foundations, beams, columns, stairca ses, chajja,lintels, balconies, shelves, plain window sills, roof slabs, facia, canopies, fins, porch, water tank etc. including pro viding centering, shuttering, staging, scaffolding, form work etc compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engin eer. (Payment for Reinforcement shall be made as per relevant item of SOR). 4280 PJEREI0092: a) All work up to plinth level 4290 PJEREI0093: b) In superstructure at all floors up to floor five level, 4300 PJEREI0106: Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutti ng, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more 4310 PJEREP1046: Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper sha pe, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable are a outside Ownders premises, all complete as per directions of the Engineer-in-Charge : 4320 PJEREP1047: With cement mortar 1:4 (1 cement : 4 fine sand) 4330 PJEREP1048: With cement mortar 1:4 (1 cement : 4 coarse sand) 4340 PJEREP1103: Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube ch allies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condi tion for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runn ers, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shal l be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be use d for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] 4350 PJEREP1108: Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per the directions of Engineer-in-Charge. 4360 PJEREP1109: Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per the dir ections of Engineer-in-Charge. 4370 PJEREP1113: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer o f membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/3 00 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C . (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane. 4380 PJEREP1114: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 l itre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physic al and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C a s 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less tha n 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got d one through the authorised applicator of the manufacturer of membrane. 4390 PJEREP1115: Extra for covering top of membrane with Geotextile, 120 GSM non woven, 100% polyester of thickness 1 to 1.25 mm bonded t o the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 4400 PJEREP1116: STRUCTURAL REPAIR WORKS : 4410 PJEREP1117: Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning t he exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as p er directions of the Engineer-in-Charge : 4420 PJEREP1118: 75 mm average thickness 4430 PJEREP1119: 50 mm average thickness 4440 PJEREP1120: 25 mm average thickness 4450 PJEREP1121: Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkali ne chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per directions of the Engineer-in-Charge : 4460 PJEREP1122: Bars up to 12 mm diameter 4470 PJEREP1123: Bars above 12 mm diameter 4480 PJEREP1124: Providing and applying anticorrosive treatment to exposed structural reinforcement with two coats of IPNET RB or equival ent with time interval of minimum 8-10 hours between each coat after the application of two coats of alkaline rust converting primer . The application shall be done by brush after cleaning existing reinforecement with wire/ rotary wire brush to make the surface fre e from loose material, dirt etc. and thoroughly washing with water and allowing it to dry inclusive of all materials, labour, equipm ent, etc. complete as per specifications and directions of the Engineer-in-Charge. The application of anticorrosive treatment shall be strictly as per technical specifications and directions of the Engineer-in-Charge. [Note: Unit M shall mean RUNNING METRE. Th e running metre of rebars shall be measured for payment purpose]. 4490 PJEREP1125: Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the stee l bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per dire ctions of the Engineer-in-Charge : Up to and including 12 mm diameter 4500 PJEREP1126: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and dir ections of the Engineer-in-Charge complete in all respect : 4510 PJEREP1127: SBR Polymer (@ 10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. 4520 PJEREP1128: Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. 4530 PJEREP1129: Providing, mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 g raded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of the Engineer-in-Charge. [No te: Measurement and Payment- The pre-measurement of thickness shall be done just after the surface preparation is completed and paym ent under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by soundi ng/ tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/sq.mm] : 4540 PJEREP1130: 12 mm average thickness. 4550 PJEREP1131: 25 mm average thickness in 2 layers. 4560 PJEREP1132: 50 mm average thickness in 3 layers. 4570 PJEREP1140: Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of con crete/ masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engineer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : 4580 PJEREP1141: Stirrer mixed Acrylic Polymer of approved make (@ 2% of weight of cement used) modified cement slurry made with non shri nk compound in Concrete/ RCC work. 4590 PJEREP1142: Stirrer mixed SBR Polymer (of approved make) modified cement slurry made with Shrinkage Compensating Cement in Concrete/ RCC work. 4600 PJEREP1143: Epoxy injection grout in Concrete/ RCC work of approved make. 4610 PJEROA1249: Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand pic king, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required de nsity. 4620 PJEROA1250: SURFACE DRESSING : 4630 PJEROA1251: Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25 Kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete. 4640 PJEROA1252: Surface dressing on new surface in two coats with bitumen of grade VG-10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. 4650 PJEROA1253: Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm wit h 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity, etc. complete. 4660 PJEROA1254: Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 Kg/sqm of surface area with 1 .5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete :Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4670 PJEROA1255: Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area wit h 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity etc. complete : Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4680 PJEROA1285: SEAL COAT : 4690 PJEROA1286: Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitume n using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surfac e, including rolling and finishing with road roller all complete. [Note: This item to be operated only with the prior approval of th e Engineer-in-Charge]. 4700 PJEROA1298: PAINTING AREA / RUNWAY MARKING : 4710 PJEROA1299: Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conf orming to IS:164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete 4720 PJEROA1300: New work (Two or more coats) 4730 PJEROA1301: Old work (One or more coats) 4740 PJEROA1309: Providing and fixing Glow Studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylore trite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by the Engineer-in-Charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope o f retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as re commended in BS: 873 (Part-4):1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedu re recommended by the manufacturer complete and as per directions of the Engineer-in-Charge. 4750 PJEROA1315: Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermopl astic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, prop ane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cle aning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charg e and accordance with applicable specifications. 4760 PJEROA1359: Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material withi n 50 metre lead as per directions of the Engineer-in-Charge. 4770 PJEROA1360: Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., dispos al of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. 4780 PJEROA1361: Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost]. 4790 PJEROA1362: Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, joint ed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except a t sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be suppl ied by the department free of cost.] 4800 PJEROO0824: THERMAL INSULATION: 4810 PJEROO0825: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS:8183, density 24 kg/cu.m., 50mm thick, wrapped in 200G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. 4820 PJEROO0826: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183, Density 16 Kg/cu.m., 5 0 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing G.I. wir e. 4830 PJEROO0827: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183 having density 24 Kg/cu .m., 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing G.I. wire etc. complete as per directions of the Engineer-in-Charge. 4840 PJEROO0828: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8 183, density 48 Kg/cu.m., 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 Gauge wire mesh, for top most ceiling of building. 4850 PJEROO0872: FALSE CEILING : 4860 PJEROO0873: Providing and fixing tiled false ceiling of specified materials size 595x595 mm in true horizontal level, suspended o n inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, sp aced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between m ain T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of siz e 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for servi like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods w ith galvanised butterfly level clips size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings a nd as directed by the Engineer-in-Charge : 4870 PJEROO0874: G.I. Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm dro p; made of G. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and electro-statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 4880 PJEROO0875: G.I. Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made G.I. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and 20% perforation area with 1.8 mm dia. holes and having NRC (Noise Reduction Coefficient) of 0.5, electro-statically polyester powder coated thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 4890 PJEROO0876: 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from n atural gypsum as per IS:2095 (Part-1) and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 4900 PJEROO0877: 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 (Part-1 ), of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm center to center with center borders of 48 mm and the side border s of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bon ded glass wool backing. 4910 PJESAN1368: SANITARY INSTALLATIONS : 4920 PJESAN1369: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 l itre low level white P.V.C. dual flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming t o IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 4930 PJESAN1370: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litr e low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:72 31, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 4940 PJESAN1371: W.C. pan with ISI marked white solid plastic seat and lid. 4950 PJESAN1373: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low lev el white vitreous china dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangemen t with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings a nd brackets, cutting and making good the walls and floors wherever required : 4960 PJESAN1374: W.C. pan with ISI marked white solid plastic seat and lid 4970 PJESAN1376: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union s and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requir ed : 4980 PJESAN1377: One urinal basin with 5 litre white P.V.C. automatic flushing cistern 4990 PJESAN1378: Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 5000 PJESAN1379: Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 5010 PJESAN1391: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pat tern, including painting of fittings and brackets, cutting and making good the walls wherever require : 5020 PJESAN1392: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 5030 PJESAN1407: Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 5040 PJESAN1408: Kitchen sink with drain board : 5050 PJESAN1409: 510x1040 mm bowl depth 250 mm 5060 PJESAN1410: 510x1040 mm bowl depth 225 mm 5070 PJESAN1411: 510x1040 mm bowl depth 200 mm 5080 PJESAN1412: 510x1040 mm bowl depth 178 mm 5090 PJESAN1457: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : 5100 PJESAN1466: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick har d board ground fixed to wooden cleats with C.P. brass screws and washers complete. 5110 PJESAN1473: Providing and fixing toilet paper holder : 5120 PJESAN1474: C.P. Brass 5130 PJESAN1665: Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : 5140 PJESAN1666: Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 5150 PJESAN1667: Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. 5160 PJESAN1668: Providing and fixing PTMT Bottle Trap for Wash basin and sink : 5170 PJESAN1669: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 5180 PJESAN1670: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. 5190 PJESAN1671: Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5200 PJESAN1672: Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wal l face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 5210 PJESAN1673: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed f ittings arrangement of approved quality and colour : 5220 PJESAN1674: 450 mm long towel rail with total length of 495 mm, 78 mm width and effective height of 88 mm, weighing not less than 17 0 gms. 5230 PJESAN1675: 600 mm long towel rail with total length of 645 mm, 78 mm width and effective height of 88 mm, weighing not less than 19 0 gms. 5240 PJESTE0618: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, lock ing arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 5250 PJESTE0619: Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respe ctively, including applying a priming coat of approved steel primer. 5260 PJESTE0623: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through t heir entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing n ecessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top cover of required thickness for rolling shutters : 5270 PJESTE0624: 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover 5280 PJESTE0627: Providing and fixing ball bearing for rolling shutters. 5290 PJESTE0628: Extra for providing mechanical device chain and crank operation for operating rolling shutters : 5300 PJESTE0629: Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area 5310 PJESTE0630: Exceeding 16.80 sq.m. in area 5320 PJESTE0664: Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase rail ing and similar works, including applying priming coat of approved steel primer : 5330 PJESTE0665: M.S. Tube 5340 PJESTE0666: E.R.W. Tubes 5350 PJESTE0667: G.I. Pipes 5360 PJESTE0674: Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. , of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-C harge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nu ts, bolts, fasteners etc.] 5370 PJESTE0675: Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts c omplete : 5380 PJESTE0676: Galvanised M.S. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. 5390 PJESTE0677: Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 5400 PJESTE0687: Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the bo dy of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects i nclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Cha rge. 5410 PJESTE0690: Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provis ion for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawing s, specifications and directions of the Engineer-in-Charge. 5420 PJESTE0691: Supplying & fixing Pigeon Protection net of mesh 15 mm x 15 mm & Gauge SW14 in sheds including specials required for bol ting with tie members of truss, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer comp lete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction o f the Engineer-in-Charge. 5430 PJESTE0698: G.I. Barbed Wire Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizon tal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 Kg/100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. [Notes: (1) Cost of posts, struts, earth work and concrete work to be paid for separately. (2) Payment to be made per metre cost of total length of barbed wire used]. 5440 PJESTE0704: Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diamet er made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating th ickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched al l along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thick ness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficien tly at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the cl osed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles et c. as per drawings, specifications and directions of the Engineer-in-Charge. 5450 PJESTE0705: Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (tota l length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron Y shaped placed 2.4 m o r 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the directions of Engineer-in-Charge, with re inforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre. [Note: Cost of M.S. angle, C.C. blocks shall be paid separately]. 5460 PJESTO0175: STONE WORK : 5470 PJESTO0176: RANDOM RUBBLE MASONRY : 5480 PJESTO0177: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cem ent : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5490 PJESTO0178: Cement mortar 1:6 (1 cement : 6 coarse sand) 5500 PJESTO0179: Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling l evel and the like. 5510 PJESTO0180: Cement mortar 1:6 (1 cement : 6 coarse sand) 5520 PJEWAT1698: WATER SUPPLY : 5530 PJEWAT1699: CPVC PIPES : 5540 PJEWAT1700: Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabil ity for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directi ons of the Engineer-in-Charge : 5550 PJEWAT1701: 15 mm nominal outer dia pipes 5560 PJEWAT1702: 20 mm nominal outer dia pipes 5570 PJEWAT1703: 25 mm nominal outer dia pipes 5580 PJEWAT1704: 32 mm nominal outer dia pipes 5590 PJEWAT1705: 40 mm nominal outer dia pipes 5600 PJEWAT1706: 50 mm nominal outer dia pipes 5610 PJEWAT1707: Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stab ility for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spa cing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good th e same including testing of joints complete as per directions of the Engineer-in-Charge : 5620 PJEWAT1708: 15 mm nominal dia pipes 5630 PJEWAT1709: 20 mm nominal dia pipes 5640 PJEWAT1710: 25 mm nominal dia pipes 5650 PJEWAT1711: 32 mm nominal dia pipes 5660 PJEWAT1712: External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solve nt cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge : 5670 PJEWAT1713: 15 mm nominal dia pipes 5680 PJEWAT1714: 20 mm nominal dia pipes 5690 PJEWAT1715: 25 mm nominal dia pipes 5700 PJEWAT1716: 32 mm nominal dia pipes 5710 PJEWAT1717: 40 mm nominal dia pipes 5720 PJEWAT1718: 50 mm nominal dia pipes 5730 PJEWAT1719: 65 mm nominal dia pipes 5740 PJEWAT1720: 80 mm nominal dia pipes 5750 PJEWAT1721: 100 mm nominal dia pipes 5760 PJEWAT1722: 150 mm nominal dia pipes 5770 PJEWAT1723: G.I. PIPES : 5780 PJEWAT1724: Internal Work - Exposed on Wall: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutti ng and making good the walls etc. : 5790 PJEWAT1725: 15 mm dia nominal bore 5800 PJEWAT1726: 20 mm dia nominal bore 5810 PJEWAT1727: 25 mm dia nominal bore 5820 PJEWAT1728: 32 mm dia nominal bore 5830 PJEWAT1729: 40 mm dia nominal bore 5840 PJEWAT1730: 50 mm dia nominal bore 5850 PJEWAT1731: Internal Work - Concealed in wall: Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including mak ing good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall : 5860 PJEWAT1732: 15 mm dia nominal bore 5870 PJEWAT1733: 20 mm dia nominal bore 5880 PJEWAT1734: External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 5890 PJEWAT1735: 15 mm dia nominal bore 5900 PJEWAT1736: 20 mm dia nominal bore 5910 PJEWAT1737: 25 mm dia nominal bore 5920 PJEWAT1738: 32 mm dia nominal bore 5930 PJEWAT1739: 40 mm dia nominal bore 5940 PJEWAT1740: 50 mm dia nominal bore 5950 PJEWAT1741: 65 mm dia nominal bore 5960 PJEWAT1742: 80 mm dia nominal bore 5970 PJEWAT1743: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including c utting and threading the pipe etc. complete : 5980 PJEWAT1744: 25 to 40 mm nominal bore 5990 PJEWAT1745: 50 to 80 mm nominal bore 6000 PJEWAT1746: Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete. [Note: Cost of water meter and stop cock to be paid separately]. 6010 PJEWAT1799: BRASS FITTINGS : 6020 PJEWAT1800: Providing and fixing brass bib cock of approved quality : 6030 PJEWAT1801: 15 mm nominal bore 6040 PJEWAT1802: 20 mm nominal bore 6050 PJEWAT1803: Providing and fixing brass stop cock of approved quality : 6060 PJEWAT1804: 15 mm nominal bore 6070 PJEWAT1805: 20 mm nominal bore 6080 PJEWAT1806: Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 6090 PJEWAT1807: 20 mm nominal bore 6100 PJEWAT1808: 25 mm nominal bore 6110 PJEWAT1809: 32 mm nominal bore 6120 PJEWAT1810: 40 mm nominal bore 6130 PJEWAT1811: 50 mm nominal bore 6140 PJEWAT1812: 65 mm nominal bore 6150 PJEWAT1813: 80 mm nominal bore 6160 PJEWAT1971: C.P. BRASS FITTINGS : 6170 PJEWAT1972: Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 : 15 mm nominal bore 6180 PJEWAT1973: Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore 6190 PJEWAT1974: Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore 6200 PJEWAT1975: Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 : 15 mm nominal bore 6210 PJEWAT1976: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore 6220 PJEWAT1977: Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per directions of th e Engineer-in-Charge. 6230 PJEWAT1978: Providing and fixing following C.P. Brass central hole wash basin mixer with copper pipe/ pipes and brass nuts of size 1 5mm, etc. complete including cutting & making good the walls wherever required complete in all respects as per specifications and di rections of the Engineer-in-Charge : 6240 PJEWAT1979: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-7171 Queens or approved equivalent) with 2 nos. x 10mm diameter & 450mm long copper pipes. 6250 PJEWAT1980: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-167 or approved equivalent) with 1 no. x 10mm dia meter & 450mm long copper pipe. 6260 PJEWAT2382: Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleani ng the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main t ested in the municipal laboratory : 6270 PJEWAT2383: 80 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6280 PJEWAT2384: 100 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6290 PJEWAT2385: 125 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6300 PJEWAT2434: Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching pow der @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deductio n will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contr actor at his own cost and nothing extra will be paid on this account]. 6310 PJEWAT2435: Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (1) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (2) Entire surface area of the sump shall then scrubbed thoroughly with wir e brush etc. and pressure washed with water. (3) Chlorination of RCC internal surface by liquid chlorine. (4) The treated surface sh all be dried using air jetting and all loose particles shall be removal from the surface. (5) Finally the surface shall be treated w ith ultra-violet radiation etc. as per direction of the Engineer-in-Charge. 6320 PJEWAT2436: Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from th e terrace including shifting at ground level as per the directions of Engineer-in-Charge. 6330 PJEWOO0237: Providing and fixing panelled or panelled & glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6340 PJEWOO0238: Second class teak wood 6350 PJEWOO0239: Kiln seasoned and chemically treated hollock wood 6360 PJEWOO0240: Kiln seasoned selected planks of sheesham wood 6370 PJEWOO0241: Providing and fixing panelled or panelled & glazed shutters 30 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6380 PJEWOO0242: Second class teak wood 6390 PJEWOO0243: Kiln seasoned and chemically treated hollock wood 6400 PJEWOO0244: Kiln seasoned selected planks of sheesham wood 6410 PJEWOO0245: Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:20 01 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of the Engineer-in-Charg e and panelling with panels of: [Note: Butt hinges and necessary screws shall be paid separately] : 6420 PJEWOO0246: 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FP T-I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS:848 : 6430 PJEWOO0247: 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, th ree layer particle board FPT-I or graded wood particle board FPT-I, conforming to IS:3087, bonded with BWP type synthetic resin adhe sive as per IS : 848 and pre-laminated conforming to IS:12823, Grade 1, Type-II marked. 6440 PJEWOO0248: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing laminatio n) grade-1, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT-1 conforming to IS:3087 bonded with BWP type synthetic resin adhesive as per IS:848 and pre-laminated conforming to IS:12823, Grade-1, Type-II marked. 6450 PJEWOO0249: Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick s hutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside gr ooves or rebates shall be measured for payment] : 6460 PJEWOO0250: Second class teak wood 6470 PJEWOO0251: Kiln seasoned and chemically treated hollock wood 6480 PJEWOO0252: Float Glass Panes - 4.0 mm thick (weight not less than 10 Kg/SQM) 6490 PJEWOO0253: Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM) 6500 PJEWOO0254: Fly proof Stainless Steel (Grade 304) wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beadi ng 6510 PJEWOO0255: 12 mm thick Exterior Grade-I MDF Board conforming to IS:14587, pre-laminated with decorative lamination on both side 6520 PJEWOO0256: 12 mm thick Marine plywood conforming to IS:710 6530 PJEWOO0257: 12 mm thick Fire retardant plywood conforming to IS:5509 6540 PJEWOO0258: Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4.0 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : 6550 PJEWOO0259: Second class teak wood 6560 PJEWOO0260: Kiln seasoned and chemically treated hollock wood 6570 PJEWOO0261: Kiln seasoned selected planks of sheesham wood : 6580 PJEWOO0291: Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block bo ard construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands a nd face veneers on both faces of shutters : 6590 PJEWOO0292: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6600 PJEWOO0293: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6610 PJEWOO0294: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 6620 PJEWOO0295: Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shu tters conforming to IS:2202 (Part-I) : On one side only 6630 PJEWOO0296: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (ov er all area of door shutter to be measured). 6640 PJEWOO0297: Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors. [Notes: (1) Cost of glass excluded. ( 2) Overall area of door shutter to be measured] : 6650 PJEWOO0298: Rectangular or square 6660 PJEWOO0299: Circular 6670 PJEWOO0300: Extra for cutting rebate in flush door shutters. [Note: Total area of the shutter to be measured]. 6680 PJEWOO0301: Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 6690 PJEWOO0302: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size : 6700 PJEWOO0303: Second class teak wood 6710 PJEWOO0304: Kiln seasoned and chemically treated hollock wood 6720 PJEWOO0305: Kiln seasoned selected class of sheesham wood 6730 PJEWOO0328: Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 6740 PJEWOO0329: 12 mm dia. 6750 PJEWOO0330: 20 mm dia. 6760 PJEWOO0331: 25 mm dia. 6770 PJEWPF2691: WATERPROOFING : 6780 PJEWPF2692: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (a) First course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (b) Second course of 20 m m cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (c) Third course of applying blown or residual bitumen applied hot at 1.7 Kg/ sqm of ar ea. (d) Fourth course of 400 micron thick PVC sheet. [Note: Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm]. 6790 PJEWPF2698: Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing ceme nt compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 K g/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the pu rpose of measurement the entire treated surface will be measured. 6800 PJEWPF2699: Grading roof for water proofing treatment with : 6810 PJEWPF2700: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6820 PJEWPF2701: Cement mortar 1:3 (1 cement : 3 coarse sand) 6830 PJEWPF2702: Cement mortar 1:4 (1 cement : 4 coarse sand) 6840 PJEWPF2703: Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers havin g Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elast omeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid ( dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping an d properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per directions of the Engine er-in-Charge. 6850 PJEWPF2704: Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC struc tures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ su bway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative ( internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrost atic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : 6860 PJEWPF2705: For vertical surface two coats @ 0.70 kg per sqm per coat 6870 PJEWPF2706: For horizontal surface one coat @ 1.10 kg per sqm 6880 PJEWPF2707: Providing and applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterpro ofing polymers on interior wall plaster surface in three coats @ 14.35 Kg/10 sqm. One coat of self priming of cementatious waterproo fing polymer (dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in t he ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per 10 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 20 NRECIV0003Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI g rade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes Finit in required proportion to make the are a clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured). 30 NRECIV0004Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water with wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete a s per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with cleani ng powder,paint remover as per requirement all labour, material etc.complete. 40 NRECIV0005Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, cle aning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with al l labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 50 NRECIV0008Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Execut ive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, se gregate the waste into biodegradable & non bio-degradeable waste and finally dispose them separately at designated place (Dumping Ya rd/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc. complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to work men, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engine er-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepera tely. The unit MONTH (MON) shall mean per house/building per month 60 PJEDRA2588Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL s hall mean KILO LITRE] 70 PJEHOR2828Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of eart h measured in stacks will be reduced by 20% for payment]. 80 PJEHOR2830Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note : Volume of cattle manure measured in stacks will reduced by 8% for payment]. 90 PJEHOR2835Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 100 PJEHOR2836Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, du mp manure and/or good earth shall be paid separately under relevant item of SOR]. 110 PJEHOR2861Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Asho kas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minim um complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 120 PJEHOR2898Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and app lying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [ Note: Unit SQM shall mean PER SQM PER MONTH.] 130 PJEHOR2903Pruning, trimming, shaping of trees/ shrubs (height 15 feet & above) and removal of cut materials up to 50m lead inclusive of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 140 PJEHOR2904Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation wa ter at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering includi ng cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Un it EA shall mean PER TRIP]. 150 PJEHOR2908Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, debri s, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direct ion of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 160 PJEHOR2909Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lea d & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 170 PJEWAT2434Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut b rushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powde r @ 0.5gm per litre capaci ty of tank, including marking the date of cleaning on the side of tank body with the help of stencil and p aint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank s hould be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contrac tor at his own cost and nothing extra will be paid on this account].
Contract Date: Dec 16, 2025 Contract Value : ₹ 38.05 Lakh
Boards / Undertakings / PSU No of Bidders 10
Rajasthan View Result →
43.
Public Administrative Department #8426969 AOC
Conservation And Repairs Of Shri Mahaganpati Temple, Ranjangaon, Tal.Shirur, Dist. Pune- 1 Dismantling the existing lights, tublelight, bulbs, fans, independent plug points, wiring including circuit mains of all types along with accessories etc. complete as per specification No.WG-DM / PW 2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works. 3 G.I sheet (Patra) Partition As per Instruction erect the vertical poles at a distance of 8to 10 feet & on that provide the horizontal poles & prepare the square, on that fix the GIsheet (patra) . Provide the opening in patra where required. Instructions:- 1) In this work Excavation in any type of road, soil, loose or hard rock should be done and after the workExcavated pits should be refill. 2) The rate of the above work is for 3 days and because of ifany reason days exceed beyond 3 days Rate as per following will be given a) for 4th day to30 th day - 3% of original rate 4 Removing the existing cement/ lime plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 m or spreading in the compound and cleaning the site etc. complete. 5 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 6 Dismantling the R.C.C. Work 1: 2: 4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 7 Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.. 8 Removing the tiles, battens and dungry cloth purlins, rafters and ridges etc. from roof, sorting out the serviceable and unserviceable materials and stacking the same as and where directed in the compound, scaffolding etc. complete. 9 Removing planking from roof or ceiling and stacking them as directed with all leads and lifts etc. complete. 10 Removing iron pipe railing having wooden or R.C.C or C.C or iron posts and stacking the materials as directed etc. complete. 11 Removing cement tiles or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all lead, lifts, etc. complete. 12 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 13 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 14 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting service able and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 15 Removing rafters from roof including the materials as directed with all leads, lifts etc. complete. 16 Removing R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound scaffolding etc. complete. 17 Dismantling wooden boardings in lining of walls and partitions and plankings in ceiling, eaves or barge board, eaves plate, excluding supporting members but including stacking within 50 metres lead :Thickness above 25 mm up to 40 mm 18 Dismantling brick masonary in lime or cement mortar and stacking the materials as directed with all lead, lifts, etc. 19 Dismantling stone masonary in lime or cement mortar including stacking the materials as directed with all lead, lifts, etc.. 20 Lowering down carefully existing stone masonry of the monument manually in proper order including shifting the stone elements up to a distance of 50 meter beyond the monument area and stacking them as directed by Engineer in-charge, removing building rubbish and cleaning the site etc. complete. 21 Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete (lift upto 1.50 m) By Manual Means. 22 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 23 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. 24 Filling in plinth and floors with approved excavated material in 15 cm . To 20 cm. layers including watering and compacting etc. complete. 25 Conveying the excavated materials, debris of brick or stone masonary, R.C.C. slab, water proofing, stone members/ materials, cement/ lime concrete, tiles/ marbles/ stone slab/ brick bat coba, etc. upto 2.5 km, away from the site and cleaning the site properly. 26 Providing and applying a Silicon Base Water Repellent Stone Sealers, on Brick / Stone masonry / Concrete surfaces in Two coats by spraying. Including cleaning / sand blasting forremoving dirt / cement mortar patches etc. by force water jet, wire brushing etc. complete. 27 Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects, etc. with 4 operations in a year and monthly checkup. 28 Providing anti termite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part-III) by punching holes 6 mm dia. drilled at a distance of 30 cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 29 Providing antitermite treatment to the wooden frames of doors/windows of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on one side and four corners on other side at a downward angle of about 45 degree at the junction of wood work and masonary and injecting150ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 30 Providing antitermite treatment to the joints of wooden beams / joist used for the roof work of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at a downward angle of about 45 degree at the junction of wood work and masonary and injecting 80ml. of chlorodane 5%W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 31 ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)bytreatingthe bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifospersquaremeterofsurfaceareacovering10yearsguaranteeon bond paper. 32 ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 33 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steelcenteringformwork,cover blockslaying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 34 Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 35 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 36 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 37 Providing and fixing in position HCRM / CRS (CorrosionResistant Steel) bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings,foundations,slabs,beamscolumns, canopies,staircase,newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 38 Providing and fixingIndian T.W Columns, beams of size (Length of 1.20 to 2.90 (9.51ft) msecition of 0.10 x 0.10 m (3.93 x 3.93 inch) for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 39 Providing and fixingIndian T.W beams and Stringer beams of size (Length of 3.00 to 3.12m (10.23ft) secition of 0.10 x 0.20 m (3.93 x 7.87 inch) for wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 40 Providing and fixingIndian T.W rafters, purlins, decorative elements of size length 1.05 to 1.70 m (3.44 x 5.57 ft) and(0.075 x 0.075 m (2.95 x 2.95inch) thick for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 41 Providing and fixingIndian T.W frames and floor joists of size ( length 1 m (3.28ft) 0.075 x 0.05 m(2.95 x 1.96 inch) thick) for roofing wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 42 Providing and fixingIndian T.W Battensof size (0.05 x 0.05 m thick length 3 m ) for roofing wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 43 Providingstructuralsteelworkinhollowsectionofvariousthicknessandsizesinsquare, rectanular and round shape from 25mm to 450mmsection as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 44 Providing and fixing solid wooden door of thickness 0.15 m including frame,fixing Big and small motifs, defensive bolts, pivot and pointed nails and providing steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 45 Providing and fixing solid wooden door of thickness 0.05 m including frame,fixing Big and small motifs, defensive bolts, pivot and pointed nails and providing steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 46 Providing and fixing jaali wooden door of thickness 0.05 m including fixing 8mm dia MS round bars,frame, pivot and providing rust proof paint to iron patti, pointed nails, steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 47 Providing & applying Polyurethane based wood coating to the new or old work in two coats including knotting, preparing the surface by scrapping, scaffolding etc. complete as per manufacturers specifications and as directed. 48 Providing and fixing teak wood railing of 1.05 m height in the temple mandap as per detailed drawings with top and bottom rails of size 0.075 x 0.15m andbalusters of 0.05 x 0.05m, each supported by the vertical newel posts of0.075 x 0.15 x 1.05 m with newel cap of size 0.1 x 0.1mas directed by the Engineer, removing the existing railing members and fixtures, including french polishing, and hardwares and joinery etc. complete. (Note: The work to be executed on preapproval of conservation architect).“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 49 Providing and fixing 38 mm.(1½″) thick Teak Wood Flooring or Planking, as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 50 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer. 51 Providing and Fixing Decorative / Ornamental grills as per design for compound wall / Fencing including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc. complete as directed. 52 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75mmdiameteretc.complete(PriorapprovalofsampleandbrandbyEx.Engineeris necessary before use) 53 Providing Un-coursed Rubble Masonry of trapstones in lime mortar 1:1½, in foundation and plinth as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking off weak corners and edges with the masons hammer, the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, bailing out water, watering and all exposed masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 54 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Flooringas per the site requirement of size of stone [0.45 x 0.30 x 0.15 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 55 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Bracketsas per the site requirement of size of stone [0.60 x 0.60 x 0.30 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 56 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Chajjaas per the site requirement of size of stone [0.90 x 0.60 x 0.21 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 57 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Walls and Parapetas per the site requirement of size of stone [0.60 x 0.60 x 0.45 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 58 Providing Ashlar Arching of trap / granite stones in lime mortar 1:1, with size of stone 45 cm. x 30 cm. x 40 cm. as per detailed specifications and drawings or as directed including the arch stones be of approved quality, colour, hard and free from defect of any kind, the arch stones in all cases of the entire thickness, the arch stones shall be dressed full and true to their proper shapes with the necessary summering, twist or winding and be set in fine mortar, the intrados, joints and beds to fairtooled and left full, the cast or keying course to be accurately fitted, at all horizontal joints the intrados to have a 2 cm. (¾″) chamfer, the face stone may be tooled or rock-faced with or without chamfer as directed, in arches up to 60 cm. (2ꞌ) in depth all stones shall be of the full thickness of the ring, arches to be built on proper centring, the bed joints shall be radial and the side joints shall be at right angles to the bed joints and the thickness of the joints shall not exceed 5 mm. (3/16″) preparing the lime mortar in lime miller, cantering/scaffolding, watering and all arch work when handed over to be perfectly clean and free from all mortar stains etc. complete. 59 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Talkhadaas per the site requirement of size of stone [0.35 x 0.35 x 0.35Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 60 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Deepmal stoneas per the site requirement of size of stone [0.60 x 0.45 x 0.30 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 61 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Domeas per the site requirement of size of stone [0.45 x 0.30 x 0.15 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 62 Providing/Re-setting Ashlar Fine Masonry of reuse-stones in lime mortar 1:1 in superstructure as per detailed specifications and drawings or as directed including the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 63 Providing Block In Course Masonry of trap (black basalt) in lime mortar 1:1½ with size of stone [0.60 x 0.60 x 0.60 m] for steps as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the face of stones shall be rough-tooled, rustic (with or without chisel draft, except at quoins), or chamfered as specified, the beds and joints of all ashlar stones to be dressed perfectly true, square and full, headers shall not be less in length than breadth of ashlar stone plus 45 cm. (1ꞌ6″), the stones shall be set in mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 17.5 cm. (7″) in height, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 64 Providing/Re-setting Ashlar Rough-tooled Stone Steps of reuse-stones in lime mortar 1:1½ as per detailed specifications and drawings or as directed including each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 65 Providing Semi-circular Coping Cut-stone Second Sort, 22.5 cm. (9″) height and 52.5 cm. (1ꞌ9″) wide of trap / granite stones in lime mortar 1:1½ with size of stone [0.75 x 0.55 x 0.20 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stone shall be dressed full or to template, exposed face of the stones shall be fine rough tooled, semi-circular and all joints shall be in line and close and not more than 3 mm. (⅛″) thick, preparing the lime mortar in lime miller, scaffolding, watering and all coping work when handed over to be perfectly clean and free from all mortar stains etc. complete. 66 Providing and fixing Trap Stone Paving, Second Sort in lime mortar 1:1, with size of stone [0.45 x 0.30 x 0.15 meter], as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete. 67 Making of moulding/ grooving/ chamfering on the surface of the formed stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 68 Making of relief architectural carving on the surface of the formed stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 69 Making of moulding or relief architectural carving on the surface of the formed wooden member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 70 Providing Brick Masonry First Class in superstructure with size of brick 0.20 x 0.15 x 0.07 in lime mortar 1:1½, as per detailed specifications and drawings or as directed including the bricks to be of uniform size, moulded ground, thoroughly well burnt and sound, ringing clearly when stuck with trowel, the bricks to be soaked in water for 12 hours before used, the bricks are to be laid flush in mortar in such bond as directed, as far as possible, bricks of uniform colour are to be selected for the face work when it is not to be plastered, the joints are not to exceed 12.5 mm. (½″), no bats or half brick to be used in the work, racking out joints where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 71 Dutchman repairs of stone sections that severely distressed, reinstallation of new Black basalt stone piece to match existing stone as a fascia of minimum 75mm depth of similar colour and texture and size. The size of the stone piece would be approx. of 150 x 300mm. The fixing of the new stone would employ mortar grout and anchoring technique after neatly cutting out damaged stone profile using one of the following tehnniques : a) Stainless steel pins of 6mm dia threaded at end. b) Helifix treatment 72 Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete 73 Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete. 74 Providing injection grouting with a slurry of lime and fine screened sand in proportion 1 : 1 with a proper pressurized jet pump, including cleaning, washing and packing the exisitng cracks or holes in the brick or stone masonry properly upwards with the slurry, scaffolding, curing etc. complete 75 Providing 12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1½:1 in superstructure, as per detailed specifications and drawings or as directed including all joints in masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete. 76 Stucco work in lime, surkhi and sand (1:1:1) as per traditional practices and design, the mortar should be prepared by grinding mill only. The thickness varies from 10mm to 100mm as per design. 77 Providing and applying integral fine coat, with addition of colour pigments, as paint to the plain lime stucco plaster in 2 layers, including scaffolding, curing, all leads and lifts, etc. complete. 1) The first coat to be laid is a mixture of fine lime and white washing lime in proportion of 2:1,made smooth with wooden rubbers and very lightly beaten. 2)The finishing coat consisting of fine lime, white washing lime, mixed with the appropriate pigment in 1:2:1 proportion is to be applied and well polished with trowels. 78 Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). 79 Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincluding cleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. NOTE: Forn Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary 80 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (300 mm dia. R.C.C. pipe) 81 Providing and fixing Mangalore tiled roofing with class AA tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc. complete (Excluding ridge and hip tiles). 82 Providing and fixing Mangalore tile ridge and hip tiles of class AA including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. 83 Providing and fixing Teak wood Eaves Board 15 cm.(6″) wide and 12.5 mm. (½″) thick, as per detailed specifications and drawings or as directed including the planks to be best Moulmein teak to be 12.5 mm. (½″) thick and 15 cm.(6″) in width, of a uniform colour and planed, the planks to be laid truly parallel to the floor so as to cover the end rows of the tiling and to be fixed with screws of the proper length driven countersunk, all joints to be neat and close, scaffoldingetc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 84 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). 85 Galvanised iron sheet 1 mm (20 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth upto 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed. 86 Preparing Shrubbery : Excavating the ground to a required depth of 30 cms. Removing rubbish and Conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proporstion to a height of 30 cms. Mixing garden soil and manure thoroughly well, leveling, watering on previous night. Planting well developed shrub plants. 0.5 m height, 0.45 mt. apart as directed and maintaining till well established by watering, weedings, stirring replacing, replacing casualatie etc. complete. Following Species to be Included in shrubbery : A) Kaner, B) Spider Lily 87 Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC 88 Documentation (still photography & videography) of the conservation process(before, after & every 3 months during process) 89 Preparation of 5 - 6 min documentary film on “ Conservation works at shree Mahaganpati premise, ranjhangaon” of which will include Script Development, Shooting, Voiceover, Post Production wherever required as per the script 90 Providing cultural and directionalsignage for information dissemination about the temple in GRC as per the design and location provided by the conservation architect. 91 Providing and fixing Directional & Instructional Signage in the acrylic board to be used indoor spaces. SS screws to be used for fixing the signage to the wall/ wooden surface.. 92 Providing lettering as part of the signage (Cultural, directional and informatory) for information dissemination about the temple in GRC as per the design and location provided by the conservation architect. 93 Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. 94 Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) 95 Providingandfixingweldedmeshof11gaugewireshavingmeshsize50mmx25mm including M.S Angle frame of size 35 mm x 35 mm x5 mm in position with oil painting 3 coats etc. complete 96 Providing andfixing 10cm C.I.NahaniTrapincludingC.I.gratingbendandpiece ofC.I. pipe upto the outside face of the wall complete. 97 Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical: 12 Part of Turpentine oil), on the existing Basalt stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding). 98 ProvidingandfixingP.V.C.Rainwaterpipesof110mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket withsolvent cementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. 99 Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs. 100 ProvidingandfixingheavydutyinterlockingconcreteColouredpavingblocksof60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 101 Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge 102 ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cm including1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfround G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete 103 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. 104 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 105 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. 106 Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish- ing, cleaning etc complete. 107 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 108 Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exteriorgrade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete 109 Providing and fixing 30mm thickPVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom railsandtwo19x19mm MStubesinsertedhorizontallyinsidethe hollowprofile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thickx20mmwidthonstilesandrailsusingsolventcement.Theinnerpanelshallbe laminatedwith5mm thicktermite proofwaterproof plain/prelam PVCsheet using solvent cementonthebothsidesofthepanelincludingstainlesssteelfixturesandfasteningetc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. 110 Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended falseceilingconsistingofalluminiumT2”x1½”(50mmx40mm)weighing0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. 111 Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75mmx50mmframeat60cmcenterand9mmthickcommercialplyonbothsides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc.complete 112 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 113 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete 114 Providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm size as per detaileddrawing including vertical bothside polishedkadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two verticalgranitesupports15cmheightandtopgraniteof75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 115 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. 116 Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:3without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. 117 Providingandapplyingplaster/wallpunningwithplasterofparis(withplasterofparis material)in10to13millimeterthicknessto previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. 118 ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 119 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. 120 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to oldplastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. 121 Providing and fixing white european type wall-hung, Size 360mm x 360mm x 575 mm with flush valvehaving flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmakeincluding PVC soil pipe, vent pipe upto outside face of wall, 100mm diaPVCplug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) 122 ProvidingandfixingOrissatypewhiteglazedearthenware575mmwaterclosetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 123 Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete 124 Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. 125 Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. 126 Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 127 Providing and fixing white glazed urinal with Pressmatic auto closing valvehaving flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmake with P.V.C. waste pipewith fittingarrangementetc.complete as directed by Engineer in charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) 128 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 129 Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. 130 Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BARof IZE-600MM (H) X600MM (D) and 32MM DIA. and thicknessmm of the approved brand and make.27c) Straight grab bar (2 NOS)Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. 131 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. 132 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 133 Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 134 Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, 135 Sofa Set 3+1+1Providing & fixingSofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms)Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 136 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. 137 Providing & Arrangemnt of MiId Back chair, Normal SyncroMechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery 138 Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 139 3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm.3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 140 Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing 141 Book Case with Glass Shutter @ 825Lx300Dx1650HTProviding & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. 142 Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. 143 Stainless Steel Pipe curtain rod . Providing & fixing of SS pipe curtain rodsincluding Brackets as per site in charge instructions & all necessary Fittings etc. completed 144 CurtainsProviding clothes for curtain of Bombay Dyeing/Binni/Mafatlal etc brands, stitching as per required size with Frill (Zaller) & fixing at required places ( including rings )Note:-Measurement would be taken as per actual length of window & default width ( i.e . 48” panha) Curtain (Material Synthetic Clothes & cost of clothes starting from Rs 250/- onwards) 145 Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface 146 Providing and fixing H.D.P container one piece moulded water tank made out oflowdensitypolythylerandbuiltcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet, outlet overflow of alltanks capacityabove 1000 to 20,000 litres 147 ProvidingwaterproofbeddingforflooringofBathandWC25mmthickinC.M.1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. 148 Providing waterproof plaster in W.C. and bath12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) 149 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete. 150 Providingandlayingdampproofcourse50mmthickinM20cementconcretelayerand bitumen / using cement with waterproofing compound curing, formwork etc. complete. 151 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre a sper drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.
Contract Date: Dec 13, 2025 Contract Value : ₹ 7.26 Crore
Local Bodies No of Bidders 4
Maharashtra View Result →
44.
Petroleum and Natural Gas #8419808 AOC
Providing Miscellaneous Services For Maintenance/Upkeep/Cleaning Of All Type Of Equipment, Office And Store Assistance, Housekeeping, Horticulture Works And Handling Of All Materials At Erpl-Bolpur Pump Station-Assistance in condition based monthly/ yearly maintenance of mainline pump including cleaning, refilling of oil, disposal of waste in proper place including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 2 Providing support service in Mainline engine 250 Hrs maintenance by shifting of Glacier filter to workshop, cleaning of filter, disposal of waste in proper place, oiling of fuel rack etc. including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 3 Service support in condition based quarterly/monthly maintenance of compressor including engine of the diesel compressor. Cleaning of filter, external cleaning of cooling pipe and general cleaning of the compressor including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 4 Service support in condition based qtrly/half yearly maintenance of the compressor, Cleaning of filter, external cleaning of cooling pipe and general cleaning of the compressor. Shifting of old lube oil from Air compressor room to sump pump etc. Shifting & cleaning of all parts like valves and heads of Air Compressor, inter stage cooler etc. from compressor room to workshop & back including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 5 Service support in condition based yrly maintenance of the compressor, Cleaning of filter, external cleaning of cooling pipe and general cleaning of the compressor. Shifting of old lube oil from Air compressor room to sump pump etc. Shifting & cleaning of all parts like valves and heads of Air Compressor, inter stage cooler etc. from compressor room to workshop & back including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 6 Service support in condition based qtrly maintenance of centrifuge in shifting of Centrifugal Bowl from shed to workshop and vice versa, cleaning, including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 7 Service support in condition based Half yrly/ yrly/ 2 yrly maintenance of centrifuge in shifting of Centrifugal Bowl from shed to workshop and vice versa, cleaning, including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 8 Assistance in condition based monthly maintenance of fire fighting engine and pump, cleaning of engine & pump including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 9 Assistance in condition based 2 yrly/ 4 yrly maintenance of fire fighting engine and pump, cleaning of engine & pump including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 10 Assistance in condition based monthly maintenance of Jockey pump, cleaning including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 11 Assistance in replacement of engine lube oil in mainline engine (1450 ltrs approx). Lube Oil from engine shed to sump pump, shifting of old & new filter element, shifting of old & new engine oil. Cleaning of engine sump, cam chamber, oil bath chamber and removing old lube oil from pipings including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 12 Providing support service in Mainline engine 1500/3000/1800 Hrs. Maintenance by shifting of heavy components and materials from pump shed to workshop and vice versa. Service support in removal of Breather valve from M/L engines, cleaning and refitting; cleaning of injectors components including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 13 Service support in cylinder head replacement of mainline engine including assistance in removing & fitting of head, cleaning of parts shifting of tools, and tackles as per instruction of EIC/Site Engineer. 14 Assistance in shifting of new lube oil filled drum each 210 ltrs from lubeoilshed to pump shed for top up in mainline engine by operation dept. 15 Support service for condition based Qtrly/ 2 yrly maintenance of DU pump including general cleaning of the unit, Suction strainer cleaning and assistance in Loosening and tightening of the bolts and nuts including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 16 Assistance for condition based Qtrly/ 4 yrly maintenance of sump pump including assistance in general cleaning of the unit and greasing of all the valves including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 17 Assistance for condition based Qtrly/ Hyrly/ Yrly maintenance of OWS pump including assistance in general cleaning of the unit and greasing of all the valves including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 18 Providing support service for condition based Hyrly/ Yrly maintenance of station valves including assistance in general cleaning and greasing including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 19 Providing support service in cleaning of mainline pumping unit including auxilliaries with cotton waste, cloth(supplied by owner) including disposing of all oilly waste into proper dustbinincluding shifting of tools, and tackles as per instruction of EIC/Site Engineer. 20 Providing support services of labour for all other miscellaneous job in station. 21 Providing support services of labour as and when required for assistance in breakdown, predictive proactive maintenance, defective attending and exigency in extended hours. This item will be operated if the service of labour is utilized beyond normal working of 8 hours per day. 22 Cleaning of rupture tank of mainline engine including cleaning of drain line including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 23 Support service for PIG preparation, lunching, retrieving including shifting, cleaning of PIG retrieved from barrel, cleaning of barrel, pit etc. including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 24 Providing assistance in M/L Engine oil filter (lube oil & fuel oil) replacement including shifting of old & new filters (in each bank) including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 25 Cleaning of compressors & fire fighting enginesincluding their starting vessel and pipings etc. including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 26 Providing support service for condition based Hyrly/ Yrly maintenance of Basket Strainerincluding assistance in general cleaningand greasing including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 27 Providing support service for condition based Monthly maintenance of EG at Pump station including assistance in general cleaningand greasing including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 28 Providing support service for condition based Qtrly/ Hyrly/ Yrly maintenance of Foam Pump station including assistance in general cleaning and greasing including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 29 Providing support service formaintenance of DRA Skid including assistance in general cleaningand greasing including shifting of tools, and tackles as per instruction of EIC/Site Engineer. 30 Assistance for refilling of DRA Chemical in storage tank forinjection pumpby operation dept. 31 Cleaning of CF Unit, DMFA Pump, DU Pump, DRA Skid unit, Foam Pump, 250KL Crude storage tank etc.including tools and tackles as per instruction of EIC/Site Engineer. 32 Assistance in condition based monthly maintenance of 800 KVA transformer including cleaning of transformer, oil and winding temperature checking, silica gel replacement, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 33 Assistance in condition based yearly maintenance of 800 KVA transformer including cleaning of transformer, oil and winding temperature checking, silica gel replacement, IR value checking of transformer windings, earthing connection checking, nut bolt tightening, dismantling and reassembling of Transformer terminals, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 34 Assistance in condition based half -yearly maintenance of 11 KV VCB maintenance including IR value measurement and checking, greasing and general cleaning of VCB, tightening of jaw of VCB, checking of electrical controls of VCB etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 35 Assistance in condition based yearly maintenance of Bus duct including cleaning, tightening of nut-bolts, terminal checking complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 36 Assistance in condition based half yearly maintenance of 400 KVA DG including general cleaning, IR checking, tightening of nut bolts, earthing connections etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 37 Assistance in condition based half yearly maintenance of LT motors including IR value checking, general cleaning, panel and terminal block cleaning, greasing, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 38 Assistance in condition based half yearly measurement of earth pit readings inside ERPL, Bolpur including measurement of individual earth pit as well as grid resistance values complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 39 Assistance in condition based half-yearly maintenance of cable trench including general cleaning, cable inspection and checking, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 40 Assistance in condition based half yearly maintenance of bulk storage heater including cable inspection and checking, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 41 Assistance in condition based half yearly maintenance of OWS system electrical panels and related motors including general cleaning, cable inspection and checking, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 42 Assistance in condition based quarterly maintenance of PCC/ MCC Panels at ERPL, Bolpur including cleaning of bus bars, electrical components, checking of control and power system, tightening of jaw, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 43 Assistance in condition based half yearly maintenance of Centrifuge system electrical panels and related motors including general cleaning, cable inspection and checking, etc. complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 44 Assistance in condition based yearly checking of Insulating Joint/Coupling complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 45 Assistance in condition based half- yearly general checking of FLT & High Mast Towers including replacement of light fittings with owner supplied luminaries and associated accessories, greasing of Gearbox and motor of High Masts, cable replacement etc., complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 46 Assistance in condition based half yearly/yearly general maintenance of Mainline Engine Electrical Auxiliaries including IR value checking, General cleaning and panel and terminal block checkingetc., complete in all respect including tools, tackles, etc. as per instruction of EIC/ Site Engineer. 47 Providing support services of labour as and when required for assistance in breakdown, predictive proactive maintenance, defective attending and exigency. 48 Providing support services of labour as and when required for assistance in breakdown, predictive proactive maintenance, defective attending and exigency in extended hours. This item will be operated if the service of labour is utilized beyond normal working of 8 hours per day. 49 Dusting of inside and cleaning of outside surface of various electrical and electronicpanels like PCC, MCC, PLC, UPS, Chargers etc. as per instruction of EIC/ Site Engineer (fortnightly). 50 Carrying telephone instruments for repair/ replacement from control building to site, admin. building, assistance in checking of telephone cables, restoration of telephone service as per instruction. 51 Assistance in taking battery readings, pouring of distilled water, applying petroleum jelly in lead acid batteries, cleaning of battery terminals taking all precautions for safety, cleaning of battery terminals for maintenance free/ sealed batteries taking all precautions as instruction. 52 Assistance during taking reading of equipment, telecom panels, carrying test equipment, laptops, multimeters, straight and cross ethernet cables, tools and tackles etc. for schedule maintenance/breakdown activity as per instruction. 53 Assistance in cleaning of telecom equipment, monitors, routers, switches, connectors, media converters, telecom exchange, telephones etc. as per instruction. 54 Assistance in cleaning of servers, workstations, computer peripherals, shifting of equipment, keeping & arranging various types of cables, adaptors, Software CDs, manuals properlyin racks as per instruction. 55 Assistance in dismantling, calibration, rectification, cable removal and termination, re-installation, leak arrestingin instruments of engines, boosters, MOVs, Fire Fighting engines, Tanks, Compressors, DG, centrifuge, OWS and other field instrument during carrying outschedule maintenance and calibration of instruments in workshop, cleaning of the instruments and assistance in keeping ready for spare & field use as per instruction. 56 Assistance in dismantling, calibration, rectification, cable removal and termination, re-installation of engines during 250 hrs,3000 hrs,9000 hrs and 18000 hrs. schedule maintenance. 57 Providing support services of labour as and when required in dismantling, calibration, rectification, cable removal and termination, re-installation, leak arrestingin instruments of engines, boosters, MOVs, Fire Fighting engines, Tanks, Compressors, DG, centrifuge, OWS and other field instrument during carrying out predictive, breakdown maintenance etc. as per direction of EIC/Site Engineer. 58 Providing support services of labour as and when required for assistance in breakdown, predictive proactive maintenance, defective attending and exigency in extended hours. This item will be operated if the service of labour is utilized beyond normal working of 8 hours per day. 59 Support service for Operation of oil water separator/sumpincluding cleaning, servicing of various equipment/crude tank in general Shift including Sunday, holiday(including monsoon period/ rainy day) the year as per direction of Engineer-in-Charge. 60 Support service for Operation of oil water separator/sumpincluding cleaning, servicing of various equipment/crude tankin beyond general shift including Sunday, holiday(including monsoon period/ rainy day) as per direction of Engineer-in-Charge. 61 Assistance for up keeping & segregation of registers, document photocopy, maintaining dispatch register, file shifting, preparation & servicing of tea/ coffee etc.as per instruction in general shift duty. 62 Assistance for keeping record of incoming & outgoing materials, maintaining materials register for spare, consumption record, materials staking in proper order, up keeping of store etc. as per instruction. 63 Assistance for up keeping of registers, document photocopy, maintaining dispatch register, file shifting, preparation & servicing of tea/ coffee etc.as per instruction beyond general shift duty. 64 Providing service support during 9000/12000/18000 hrs major maintenance of Mainline Pumping Units including dismantling, cleaning & fitting back of cylinder heads, turbocharger and associated ducts, jacket water header, exhaust header, injectors, fuel pumps, rocker arms, tappet covers, pistons, liners, connecting rods, Pumps, Pump seal, damper etc. Handling/shifting of various components of engine,pump and gearbox, loading& unloading of spares in vehicles as per requirement, emptying out oil from engine/GB/Pump/DSTs, shifting of lube oil barrels, draining of Jacket water/coolant/fuel/lube/diesel circuits, engine lube oil sump, oil bath filter sump, descaling of diff parts, cleaning of DSTs and oil bath filters mesh, C/A intercoolers. Filling of jacket water/coolant, lube oil in engine sump, oil bath filter sump,etc, and other associated works. Whole work is to be completed withing 24 working days. 65 Cutting grass and removal of the same outside the boundary area within 3 km lead all as per direction of EiC. (5500 sqm per month) 66 Vim powder / cleaning powder 67 ISI grade phenyl 68 Acid / Naphtha Ball 69 Coir Brushes / wire brushes 70 Finit. 71 Supplying & providing odonil cake (small)in wash basins, w.c. & other specified places as instructed. 72 Regular removing of cob web, spider nets, from all rooms, ceilings of Control Building, compressor room, lub.shed, store etc. complete 73 Regular removing of cob web, spider nets, from all rooms, ceilings of Pump shed,Fire fighting pump shed, Security room, water pump shed, foam pumpshed etc. complete 74 Maintaining all the rooms of the control building at pump station by daily cleaning through mechanical or other means including daily removal of garbage from waste paper baskets of the pump station complex and throwing the same to outside of boundary wall as directed. 75 Maintaining all the tables, chairs and other furnitures, equipments of the control room, all rooms of adm. building, security room by daily dusting off & swabbing (with water). 76 Cleaning & sweeping of all the roads, approach roads to the brick pavements, plinth protections of the pump station & tank farm. 77 Regular maintenance of lawn,hedge border plants, trees/ shrubs including weeding out all undesirable vegetation growth,watering forking & applying of manure, insecticides etc. with all labours tools, tackles complete as per direction of EIC (Total area approx 8000sq. M) Rate isper sq.m. per month. 78 Regular maintenance of trees & shrubs including weeding out all undesirable growth, watering forking & growth of plants including cutting of unwanted trees and trimming of branches of trees etc. as per direction of EIC with all labour manure, insecticides, etc. 79 Supplypreparation and application of brickcolour/ Ala wash/ Lime wash as and when required on the brick/tub & other area as per the direction of EIC including all labour tools, tackles complete in all respects. 80 Supplying at site manure & cowdung & good earth of approve quality by the Engineer- in- Charge including carrying, transportation, loading, unloading i.e. manpower, materials all inclusive. 81 Supplying and planting essential flowers annual flowers in flower bed including preparation of soil, application of required inclusive of all labour, tools, tackles etc. complete in all manure, medicine and water as and when required inclusive of all labour, tools tackles etc. complete in all respects . 82 Supply and planting seasonal flowers, annual flowers in flower bed including preparation of soil, application of manure, medicine and water as and when required inclusive of all labour, tools, tackles etc. complete in all respects- HYBRID VARIETIES 83 Cleaning, dusting & removal of stains of electrical fittings like ceiling fans, wall mounted fans and tube light fittings, etc. of the Control Building, Store, Security,Lubeshed,Compressor room,Pump shed, F/F shed etc complete as per direction of EIC/Site Engineer. 84 Cleaning of drinking water tanks located at the roof top of the buildings with bleaching/detergent or any other solvent/ powder with all labour and materials complete. 85 Cleaning & stripping bushes, grass, jungle, vegetation, shrubs, etc. including uprooting and collecting rotten hogla and removal of the same outside the boundary wall for a lead upto 5 km, dewatering if required, with all labour, tools & tackles and materials complete. 86 Cleaning of entire surface drains including removal of all rubbish, garbage, bush, uprooting vegetations (both sides of drain), debris, muck and all unwanted materials including throwing outside of the compound wall, including supply of all tools tackles required for the operation. 87 Cleaning soak pit 2.5m dia and disposal of unwanted materials to a distance of 500m 88 Material Loading, Unloading, shifting & handling of all types of materials such as loose pipes (bare/in bundles), fittings (loose/in lot), valves, electrical & instrumentation items and various other materials etc as received in packed/unpacked condition/wooden crates/boxes/pallets etcfromtruck/trailer using hydra with valid Fitness certificate issued by RTO and Load test certificate issued by competent authority & necessary insurance, to be carried out as per directions of Engineer-In-Charge/Site Engineer including cost of labour, slings, D shackles, tools & tackles etc. as required for proper handling of materials with necessarysafety precautions including the cost of Personal protective equipment such as helmets, safety shoes, hand gloves etc. and complete in all respects. 89 Manual handling of material such as loading/ unloading, packing/ unpacking, shifting, greasing, removal of rust, applying primer/paint over metal surfaces of pipes/fittings, vlaves etc and various miscellaneous jobs at material store yard/plant premises as required to complete the jobas per directionEIC/site engineer including cost of labour, tools, tackles, insurance of labour etc., considering all necessary safety precautions including the cost of Personal protective equipment such as helmets, safety shoes, hand gloves etc and complete in all respects.
Contract Date: Dec 11, 2025 Contract Value : ₹ 43.53 Lakh
Boards / Undertakings / PSU No of Bidders 2
West Bengal View Result →
45.
Defence #8411800 AOC
Tender For Day To Day Maintenance Misc Repairs At 42 Weu And Repairs To Cooling Appliances Internal Electrification And Water Supply Distribution Line At 42 Weu At Sac Under Ge Af Tvm; 1 Day to day maint at Pkt A, B, D & E and petty repair services at HQ SAC Trivandrum. 2 Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional.Note : Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. 3 S&Fin repairs 25mm dia decorative anodised Aluminium curtain rodsincluding supporting brackets and end caps/dome complete all as specified and directed 4 Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins. complete all as specified and directed 5 S&F in repairs looking mirror 600mmx450mm beveled edge 5mm thick selected quality glass, mounted on 6mm thick commercial plywood, aluminum frame around and fixed to wooden plugs with chromium plated brass screws and cup washers complete. 6 S&F in repairs aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.complete all as specified and directed 7 S&F in repairs 150mm extruded brass handles fabricated and polishedcomplete all as specified and directed 8 S&F in repairs 150 mm aluminium handles, cast type, anodised.complete all as specified and directed 9 S&F in repairs 125 mm aluminium handles, cast type, anodised. complete all as specified and directed 10 S&F in repairs 200 mm long brass tower bolts complete all as specified and directed 11 S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section. complete all as specified and directed 12 S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section. complete all as specified and directed 13 S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges. complete all as specified and directed 14 S&F in repairs stainless steel butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding. complete all as specified and directed 15 S&F in repairs Aluminium CP towel ring fixed with flanges and brackets as per specifications complete all as specified and as directed 16 S&F in repairs to decorative 150mm brass mortice lock complete all as specified and directed 17 S&F in repairs decorative brass handles (size not exceed 300mm) for doors including mortice lock complete all as specified and directed 18 M & L 18/19mm thick Prelaminated plywood, prelaminatedon both sides with decorative choice laminations, fixed with screws to incupbords, warddrops, kitchen covered cabinetetc around the plywood/ teakwood lipping shall be finished with two coats of French polish. 19 Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed 20 Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.)complete all as specified and directed. 21 Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each, resecuring or easing and refixing in the same opening, including finishes complete all as specified and directed 22 Taking down Shutters of any description n.exc 1 sqm each, resecuring or easing and refixing in the same opening, including finishes complete all as specified and directed 23 S&F plain, solid, 2nd class hard wood straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with pinned at joint etc complete. 24 S&F 75 mm longstainless steel butt hinges, medium weight, cold rolled and fixed. complete all as specified and directed 25 S&F 100 mm long stainless steel butt hinges, medium weight, cold rolled and fixed. complete all as specified and directed 26 S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed. complete all as specified and directed 27 S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed. complete all as specified and directed 28 S&F 100 mm long aluminium handles, cast type, anodised and fixed. complete all as specified and directed 29 S&F 150 mm long aluminium handles, cast type, anodised and fixed. complete all as specified and directed 30 S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring,size 140 mm.anodised with hard drawn steel spring overall length suitable for aluminium/wooden door complete all as specified and directed 31 S&F in repairs floor door stopper of brass body and tongue, anodised with hard drawn steel spring,size 140 mm.anodised with hard drawn steel spring overall length suitable for aluminium/wooden door complete all as specified and directed 32 S&F in repairs door closers of aluminium die cast bodyhydraulically regulated designation No 2, universal type, suitable for door shutters of 800 to1000 mm in width and of weight between 61 to 80 kgs and fixedcomplete all as specified and directed 33 S&F 4.80 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squaresexceeding 0.50 Sqm in each pane.complete all as specified and directed 34 Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work andcarryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof.Note :Any item required to be replaced shall be paid under respective item and in that case this above item shall not be measured and paid. 35 S&F in repair pillar taps, fancy type chromium plated copper alloy, with capstan heads, chromium plated, fancy type ,screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mmcomplete all as specified and directed. 36 S&F in repairs 15 mm stop valves/Angle cock, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipecomplete all as specified and directed 37 S&F in repairs 15 mm CP fancy type bib tap cast copper alloywith crutch or butter fly handle, scewed down, screwed for iron pipe or for brass ferruleand fixedcomplete all as specified and directed 38 Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm diacomplete all as specified and directed. 39 S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm longcomplete all as specified and directed 40 S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed 41 S&F in repair C.P. grating 100mm square/round with or without holecomplete all as specified and directed 42 S&F in repairs 32 mm dia PVC waste pipe for WHB complete all as specified 43 S&F in repairs 40 mm dia PVC waste pipe for sink, complete all as specified 44 S&F in repairs stainlesssteel toilet paper holder fixed with wooden gutties and screws to wall surfacescomplete all as specified and directed 45 S&F in repairs stainless steel soap tray fixed with wooden gutties and screws to wall surfaces. complete all as specified and directed 46 S & F in repairs, vitreous china WHBwhite, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed. 47 S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe but fixed complete all as specified. 48 Cleaning ofwater tank capacity 500 ltrs and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed. 49 Cleaning of water tank capacity 1000 ltrsand removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed. 50 S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed. 51 S&F in repairsPVCwater tank cover of any pattern,colourand any size complete all as specified and directed. 52 S&F in repairs health faucet, CP with flexible pipe of bore 15mm with necessary holder , screws and fasterens fitted to wall complete all as specified and directed. 53 Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and Health Faucet with pipe complete all as specified 54 S & F in repair 3 layer (white colour) 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as in repairs after removing existing damaged water tankall as specified and directed 55 S & F in repair 3 layer (white colour)750 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as in repairs after removing existing damaged water tankall as specified and directed 56 S & F in repair 3 layer (white colour)1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as in repairs after removing existing damaged water tankall as specified and directed 57 S & F in repair 25 mm bore,ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed .(Minimumweight 15mm-142 gms/20mm -210 gms/25mm -455 gms/40 mm-690 gms) complete all as specified and directed 58 S&F in repairs spindle for stop cock complete all as specifed and directed. 59 Cleaning of pipes of any dia after opening of bib taps, stop cock, angle cock, pillar taps and gate valve etc and refixing in same position after cleaning of pipes complete all as specified and directed. 60 S&F in repairs tank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore commplete all as specified and directed. 61 S&F in repairs PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed. 62 S & F in repairs 125 mm size chromium plated brass shower rose with or without swivel joints and swivel arms for fixing with 15 mm dia bore pipe complete all as specified and directed. 63 S & F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed 64 S & F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed 65 M&L for preparation of new woodensurfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimercomplete all as specified and directed 66 S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed in wooden windows, doors and upvc windows with beading, aluminium wire staples and necessary arrangement also including necessary scaffolding wherever is required Note : Work in G+4 building Scaffolding shall be included in quoted rate complete all as specified and directed. 67 Dismantling of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etccomplete all as specified and directed 68 M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite including 10 mm thick screed bed in CM 1:4 complete all as specified and directed 69 Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functional complete all as directed by Engr-in- Charge. 70 Taking down cement or cement lime plaster of any description on brick or stone walls, ceilings etc.including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed 71 M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finished the surface even and smooth with out using extra cement complete all as specified and directed. 72 M&L for rendering 15mm thick on fair face of brick work or concrete surface in CM 1:6including finished the surface even and smooth with out using extra cement complete all as specified and directed. 73 M&L for rendering 5mm thick on fair face of brick work or concrete surface in CM 1:3including finished the surface even and smooth with out using extra cement complete all as specified and directed. 74 M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper on wall over a coat of primer complete all as specified and directed. 75 M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint over a coat of primer complete all as specified. 76 M&L for preparing new plastered surface of ceiling and applying two coat of white wash on ceiling all as specified and directed 77 S& F in repairs basin mixer with 450mm braided connection pipecomplete all as specified and directed by Engr-in-Charge.Make :Jaquar/CERA/Prayag or equivalent 78 S& F in repairs brass chormium plated 3 in 1 wall mixer wth the provision of overhead shower and telephonic shower arrangementcomplete all as specified and directed by Engr-in-Charge.Make :Jaquar/CERA/Prayag or equivalent 79 M&L for arresting Leakage of joint of UPVC/PVC/CPVC pipe of any size with solutioncomplete all as specified and directed 80 Removing basin mixer/ wall mixer and refixing in the same position after repairs/replacement of washer/plunger for arresting leakages including cleaning etc complete all as specified and directed. 81 Taking down glass corner shelf/straight glass shelf and refixing with new CP bracket and fitting with screws, complete all as specified and directed. 82 Fixing only Bib tap 15mm complete all as specified and directed. Note : Item to be procured from 83 Fixing only 600mm towel rail complete all as specified and directed 84 Fixing only 150mm Aluminium handle complete all as specified and directed 85 Fixing only 15mm concealed stop cock complete all as specified and directed. Note : Item from Sl No 81 to 84 should be issued under Schedule - B 86 Dismantling of broken laterite tile including cement mortar and fixing of new laterite tile of any size (as per site) over CM 1:3 on vertical surfaces complete all as specified and directed. 87 Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similarpattern roof coverings complete all as specified and directed. 88 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 89 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick but except sheeting of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 90 Taking down of rain gutter pipe and refixing after cleaning and including brackets/fittings wherever is rquired complete all as specified and directed 91 Removing urinal waste coupling & pipe and refixing after arresting leakage including cleaning of waste coupling, complete all as specified and directed 92 Repairs to broken water pipe line including fittings as required, complete all as directed by Engr-in-charge. Note : Contractor must employ Plumber at urgent basis whether it may be day or night failing to which penalty will be imposed against the contract amount 93 Removing Push stop cock of urinal and refixing after replace plunger/washer including cleaning complete all as specified and directed. 94 M&L for removal of tree/bush from holes in walls and repair with CM 1:3 including WPC compound and including necessary scaffolding wherever is required, complete all as specified and directed. 95 Taking down Toughened glass door/Partition any size and refixing after making good including replacements of handles, brackets and necessary fittings wherever is required,complete all as specified and directed. 96 S&F in repairs aluminium weather strip with Nylon brush insert suitable for bottom of door shutters of wooden/aluminum all as specified and directed. 97 S & F in repairs Brass, 2 lever, locks, drawer, grade-I of 50 mm size complete all as specified and directed. 98 S & F in repairs mild steel 2 lever mortice lock, vertical type 100 mm size complete all as specified and directed. 99 S & F in repairs mild steel 4 lever mortice lock, vertical type 100 mm size complete all as specified and directed. 100 S&F in repairs 75mm long half folded auto hingescomplete all as specified and directed. 101 S&F in repairs venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc all as specified and directed. 102 S&F in repairs bathroom cabinet with mirror 250x400 mm size, complete all as specified and directed. 103 S&F in repairs Solar control film 50micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed. 104 S&F in repairs flush pipe of Polyethylene low or high density PVC 32mm dia for low level including fixed to WC and cistern complete all as specified and directed. 105 Taking down towel rail of any description from the wall and refixing after tiling work complete all as specified and directed 106 Taking down PVC cabinet of any description from the wall and refixing after tiling work complete all as specified and directed 107 Repairs only to flush pipe, soil waste pipe of WC for arresting leakage by providing bushes, washers, white cement, putty etc complete all as specified and directed. 108 Arresting leakage from joints between sink and granite slab by providing white cement, putty, M Seal etc complete all as specified and directed. 109 Repairs only to high/low level flushing cistern and arresting leakage of its internal fittings/washers complete all as specified and directed. 110 S&F in repairs internal fittings such as ball valve and float for flushing cistern complete all as specified and directed. 111 S&F in repairs complete set ofinternal fittings of Cascade type EWC for arresting leakage complete all as specified and directed. 112 S&F in repairs PVC eaves gutters half roundwith rounded edges of dia 110mm thickness of sheet 1.25mm complete all as specified and directed 113 S&F in repairs PVC eaves gutters half roundwith rounded edges of dia 75mm thickness of sheet 1.25mm complete all as specified and directed 114 Certain repairs/ Maintenance to complaints of B/R works and internal watersupply, sanitary fitting at 42 WEU at AF area TVM 115 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing . 116 S&F unplasticised PVC pipes 20 mm bore of prerssure rating 10 kgf/sqcm fixed complete to wall, ceiling or in floors any type of pipe 117 Supply andfixed in repairs Vitreous chinawash down water closet pan (Pedestal pattern), white,excluding flushing cistern 118 S & Fin repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 119 S&F in repairs extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long complete all as specified and directed. 120 S&F plain sheet glass 3 mm thick ordinary quality and glazing with oil putty/beading etc n.exc 0.50 Sqm each all as specified including removal of old broken glass 121 S&F in repairs Vitreous China wash basin, white, flat back, size 550x400excluding taps, waste, chain and plug andporcelainstopper but including brackets complete all as specified and directed 122 S&Fixed in repairs looking mirror 600x450 mm size Covered with aluminium frame with ply wood/black board/AC building board fixed with screw 123 S & Fixed in repairs PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement. 124 S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed on walls 125 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints lfixed on walls 126 S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. 127 S & F Brass chromium plated showerrose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore,fixed in repair. 128 Supply and fix PVC (SWR) branch piece double(double Y) equal or unequal 110mm dia 129 Supply and fix PVC (SWR) bends 75mm diaany radius. 130 Supply and fix PVC (SWR) bends 110mm diaany radius. 131 Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing ,removing serviceable tiles to store and rubbish off the premises. 132 M&L cement concrete type B0, 1:2:4 25 mm thick using 12.5 mm graded aggregate as in sub base for floor. 133 M&L Screed bed or bedding layerin cement mortar 1:4 15mm thick for laying floor finishes 134 S & F coloured ceramic tiles 7 t0 8mm thk (square /Rectangular ) area of each tile exc 0.06 sqn and n.exc 0.11 sqm ,in floors etcset and jointed in neat cement slurry and pointed with white cement or pigment to match with the shade of the tilesall as specified and as directed byEngineer-in-Charge. 135 M/L10mnm thick plastering in cement mortar 1:4 as backing coat for receiving finishes as skirting /dado. 136 M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 137 S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with aluminium wire staplescomplete all as specified and directed. 138 S & F in repair alumimum extruted section body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 801 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. 139 S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 140 S&F in repairs stop cock fancy type cast copper alloy (concealed type) 15 mm borescrewed down high pressure, with crutch or butter fly handle screwed both ends for pipe or for unions complete all as specified and directed by Engineer in charge. 141 Repairs to drain, fencing, compound all/retaining wall, footpath and cleaning of septic tank, manholes sewage line at 42 WEU at AF area Trivandrum. 142 M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius built in CM 1:6, complete all as specified and directed. 143 M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM 1:4, complete all as specified and directed. 144 M&L forPre-cast cement concrete block (PCC 1:3:6 Type C-1) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. 145 M&L for Boulder pitching, pitching is grouted with cement and sand mortar 1:6, complete all as specified and directed.Note : Thickness of stone shall be 20cm. 146 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, builtin CM 1:6 complete all as specified and directed. 147 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, builtin CM 1:6 (Except stone) complete all as specified and directed. 148 Demolition of brickwork/blockwork or stone/ boulder masonry, built in cement or cement lime mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 149 M&L for chequered cement concrete tiles 300x300x20mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and no pigment complete all as specified and directed. 150 M&L 75mm thick PCC 1:4:8 type D2, using 40mm graded stone aggregate as in floors complete all as specified and directed. 151 M&L for 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed. 152 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. 153 S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment. complete all as specified and directed. 154 -ditto- same as tem No.153 butexcept tiles complete all as specified and directed. 155 Supply and spreading coarse aggregate from 12.5mm to 4.75mm not exc 25cm thick complete all as specified and directed. 156 Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole not exceeding 15mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size from the line/clony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified andas directed by Engineer-in-Charge. Note :- Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government 157 Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole exceeding 15mtr but not exceeding 30mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system by mechanically sewage suction pump making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size from the line/clony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified andas directed by Engineer-in-Charge. Note :- Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government 158 CleaningSWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 75mm dia pipe in vertical walls/floors complete all as specified and directed. 159 CleaningSWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 110mm dia pipe on vertical walls/floors complete all as specified and directed. 160 Material and labour for Cleaning/removal of blockage from bathroom, kitchen, WHB and urinals including connected Nahani traps / gully traps/floor traps, grating of trap, waste pipes, pipe in any length upto Ist manhole etc choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users,including refixing of oval assess door covers with new nuts & washers, refixing manhole covers and for making good damaged surfaces of sorroundings of nahani trap, Gulli trap/floor traps etc with CM 1:3 or white cement complete all as directed by Engineer in Charge. Note :- Obtained waste materials shall be disposedto a distance not less than 100 mtrs as directed by Hygenic authorities) and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases complete all as specified and directed. 161 Material and labour for Cleaning/removal of blockage from EWC/IWC (any type) including connected traps (any type), pipe in any length upto Ist manhole etc choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users,including refixing of oval assess door covers with new nuts & washers andrefixing manhole covers, complete all as specified andas directed by Engineer-in-Charge. Note :- Obtained waste materials shall be disposedto a distance not less than 100 mtrs as directed by Hygenic authorities) and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases complete all as specified and directed. 162 S&F in repairs150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed 163 M&L for cement concrete bed to drain pipe 150 mm dia in cement concrete 1:3:6 type C2 including packing under the haunching on sides all as directed and specified 164 S&Fin repairs 50mm bore Unplasticized PVC pipes of pressure rating 10 kgf/sqcm in repairs complete all as specified and directed 165 S&Fin repairs 75 mm,bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed. 166 S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed. 167 S&F in reapirs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement and making good the surfaces all as directed and specified 168 S & F in repair 110 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . 169 S & F in repair 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal etc, complete all as specified and directed . 170 S & F in repair 75 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . 171 S & F in repair 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal etc, complete all as specified and directed . 172 Supply and fixed in repair SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation) sizeof cover 600 x 600mm/ 700 x 700mmconfirming to IS 12592, fixed in cement concrete 1:2:4, complete all as specified and directed. 173 Maint/ Repair to cooling appliances refrigeration at HQ SAC under GE (AF) Tvm 174 M&L Servicing of indoor unit of split type AC of 1.0 to 3.0 Ton Capacity of any make by air blowing, cleaning the filter in water and drying in sun, cleaning of drain tray and rectifing water leak, checking and tightning the electrical connection all as directed. 175 M & L for servicing of outdoor unit of Split type air conditioner of1.0 to 3.0 Ton capacity any make by compressed air and water washing,descaling of condeser coil and oiling of outdoor fan motor, checking and tightning of all the electrical connections, nuts, bolts, washers all as specified and as directed. 176 M & L for painting of outdoor unit of Split type air conditioner of 1.5/2.0/3.0 ton capacity any make including preparation of old painted surfacecomplete and painting with one coat of Synthetic enamel paint complete in position all as specified and as directed. 177 M& L for stickering of MES/SM Nos on indoor and outdoor unit of any type of air conditioning in any location all as directed. 178 M& L for Removing the Split type AC 1.0 ton to 2.0 Ton, by taking out from the existing position after pumping down gas from position with frame, outdoor / indoor unit carefully, shifting to new position, cutting opening wall of required size & fix in new position, topping up of gas and making good distrubed surface of wall opening by plastering and appling white wash including closing the old opening making good distrubed surface plastering and appling white wash all as required and directed 179 M& L for Removing the Split type/ tower / cassette typeAC 3.0 ton to 4.0 ton capacity after pumping down gas from position, refixing to new position alongwith and charging of gas in the compressor after rectifing leak and rat cutting complete all as directed. 180 Supply and charge of gas R-410/R32 for inverter typre split AC of 1.0/1.5/2.0/3.0/4.0 Ton capacity after leak testing and rectification of leak all as specified & directed. 181 Supply and charge of gas R22/R134a to Split AC,Tower AC, Cassette Type AC of 1.0/1.5/2.0/3.0/4.0 Ton capacity after leak testing and rectification of leak all as specified & directed. 182 M&L for taking out old unserviceable capillary and stainer from refrigerator and supply and fix new capillary & stainer of any capacity.all as specified and as directed. 183 All as per item No 182 above but for inverter typre split AC and split type AC 1.0/1.5 /2.0 Ton capacity. 184 Servicing of refrigerator by air blowing, cleaning of condensor coil, rubber bedding & checking and tightning the electrical connection all as directedof capacity 165to 430 Ltrs all as specified and as directed. 185 Servicing of water cooler by air blowing, cleaning of condensor coil, checking and tightning the electrical connection all as directed for water cooler of capacity 40/80 ltrsall as specified and as directed. 186 Supply and fix in replacement of outdoor capacitor 36 + 5% uFD 187 Supply and fix in replacement of outdoor capacitor 46 + 5% uFD 188 Supply and fix in replacement of outdoor capacitor 62 + 5% uFD 189 Supply & replace timer switch for refrigerator of any capacity all as specified and directed. 190 Supply & replace bimetal switch for refrigerator of any capacity all as specified and directed. 191 Removing defective over load protector and supply and fixing new over load protector for Deep freezer/ refrigerator of any capacity and testing completeall as specified and as directed. 192 Supply and fix in replacement of defective fan motor with new fan motorsuitable for water cooler/deep freezer of any capacity and testing complete all as directed. 193 All as per No 192 above but forouter unit of split AC 1.5 Ton capacity all as specified and directed. 194 All as per No 192 above but forouter unit of split AC 2.0 Ton capacity all as specified and directed. 195 All as per No 192 above but forouter unit of inverter type split AC of 1.5 Ton capacity all as specified and directed. 196 All as per No 192 above but forouter unit of inverter type split AC of 2.0 Ton capacity all as specified and directed 197 All as per No 192 above but forinner unit of split AC of 1.5 Ton capacity all as specified and directed. 198 All as per No 192 above but forinner unit of split AC of 2.0 Ton capacity all as specified and directed. 199 All as per No 192 above but forinner unit of inverter type split AC of 1.5 Ton capacity all as specified and directed. 200 All as per No 192 above but forinner unit of inverter type split AC of 2.0 Ton capacity all as specified and directed. 201 All as per No 192 above but swing motor of split AC 1.5 /2.0/3.0 Ton capacity all as specified and directed. 202 M&L for rewinding of defective outdoor unit fan motor of split type AC 1.0/1.5/2.0 ton capacity any capacity and testing complete all as directed. 203 Removing and Repairs to electronic control PCBfor split type AC 1.0/1.5/2.0 ton capacity of existing make all as directed. 204 All as per item No 203 above but for mega split, towerAC type AC 3.0/ 4.0 ton ton capacity all as specified and directed. 205 All as per item No 203 above but forinverter type split AC of 1.0/1.5 ton capacity (outdoor & indoor) of existing make all as directed. 206 Supply and fix in repairs electronic control PCB with panel for 3.0/ 4.0 ton Tower/cassette type AC of existing make all as directed. 207 Supply and replace electronic control PCB for Smart Inverter Refrigerator all as directed. 208 Supply and replace sensor / anti ice thermostate for split type ACof any model all as directed. 209 Supply and replace remote unit for split type ACof any model all as specified and directed. 210 Supply and replace remote battery 1.5 Volts for split type ACof any model all as specified and directed. 211 supply and fix in repairs compressor suitable for split type AC 1.5 Ton capacity by removing unserviceable compressor after cutting the refrigerant line including supply and fixing new hermetically sealed compressor unit suitable to operate on 230 volt AC including connecting back the suction & discharge refrigerant lines, vaccumising charging of refrigerant testing and commissioning for smoot functioning all as specified & directed. 212 All as per item No 211 above, but for 2.0 Ton capacity all as specified and directed. 213 All as per item No 211 above, but for 4.0 Ton Tower AC capacity all as specified and directed. 214 All as per item No 211 above, but for inverter type split AC of 1.5 Ton capacity all as specified and directed. 215 All as per item No 211 above, but for inverter type split AC of 2.0 Ton capacity all as specified and directed. 216 All as per item No 211 above,but for split type AC 3.0 ton/4.0 Ton capacity, 425 Volts 3 phase all as specified and directed. 217 Supply and fix push tap CP brass, 15 mm suitable for water cooler of any capacity all as specified and directed. 218 Material and labour for repair of voltage stabilizer after removig the burnt out unserviceable winding cleaning the slots, insulate properly and rewindingtransformer including testing of capacity 5 KVA, single phase, 230 V AC, 50 Hz all as specified and directed. 219 All as per item No 218 above, but of capacity 3/ 2 /1/0.5 KVA all as specified and directed 220 Material and labour for repair of voltage stabilizer by replacing time delay relay /main relay unit of voltage stabilizer with new of capacity 5 KVA, 4KVA including testing complete all as directed. 221 All as per item No 220 above, but of capacity 3/ 2 /1/0.5 KVA all as specified and directed. 222 Supply and replace service valve for split type AC of 1/4 Size all as specified and as directed. 223 Supply and replace service valve for split type AC of1/2 Size all as specified and as directed. 224 Supply and replace service valve for split type AC of5/8 Size all as specified and as directed. 225 Supply & replace condenser unitfor split AC of the following type and any make / capacity all as specified and as directed: 226 1.5 Ton capacity 227 2.0Ton capacity 228 Supply & replace outer body kit for split type AC of following capacities complete with condensor coil and fan motor complete of existing make all as specified and directed. Note: Compressor, condensor coils and fan motorwill be measured and paid separately. 229 1.5 Ton capacity 230 2.0Ton capacity 231 Supply and replace copper pipe 1/4all as specified and as directed. 232 Supply and replace copper pipe 1/2all as specified and as directed. 233 Supply and replace copper pipe 3/4all as specified and as directed. 234 Supply and replace copper pip 5/8all as specified and as directed. 235 Supply and replace flair nut 1/4all as specified and as directed. 236 Supply and replace flair nut 1/2all as specified and as directed. 237 Supply & replace drain PVCpipe for split type AC any capacity all as directred. 238 Supply and replace PC Board of indoor for inverter type split AC of 1.5 to 2.0 ton capacity of existing make all as directed 239 Supply and replace PC Board of outdoor for inverter type split AC of 1.5 to 2.0 ton capacity of existing make all as directed 240 S & F Grill for enclosing the outer unut of air conditioners of any capacity 241 Supply & fix flexible PVC pipe for drinking purpose of any dia suitable for any type of water cooler 242 Supply & replace MS/GI bracket for fixing of outer unit of Air conditioners of capacity 1.5 ton/2.0 ton all as specified and as directed 243 Supply and replace Metal plug and socket with MCB 20 Amps and steel enclosureall as specified and as directed 244 Supply and replace MCB SP5 to 30 Amps 230 Vall as specified and as directed 245 M&L for sub main wiring surface/ concealed type including cutting chases and making good in CM 1:3 complete with (2 runs of 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth continuity) 1100 Volts grade PVC insulated unsheathed single core multistranded cable FR grade with copper conductorconfirming to IS 694 drawn inconduit including provision of suitable dia PVC rigid conduit (medium grade) with conduit accessories such as bends, elbows, saddles all as specified and as directed. 246 Ditto as per item ser No 245here in after but for4x6.0 sq. mm + 1x6.0 sq. mm earth wire All as specified 247 Supply and replace thermocool insulation for copper pipe for split type AC of any type and capacity.all as specified and as directed 248 Supply and replace unserviceable fan blade of outdoor unit fan motor of split type AC 1.0/1.5/2.0/ 3.0 ton capacity with new fan blade all as specified and directed. 249 Comprehensive Annual Maintenance Contract (AMC)of water cooler by OEM . Make :Cross field Water Purifiers Pvt Ltd (17 Qty) complete all as specified and as directed.Note : The work includes changing of filter element, PC board,UV lamp, UV choke, hose, angle cock tap including pipe connection etc as per site requirement and all as specified. 250 Supply and replace of all filter of water cooler / purifire CANTT RO or any type and capacity of existing make complete all as specified and as directed 251 Supply and installation of 3/4 PVC drain piping system for outdoor motor unit, including all necessary fittings and connections to ensure proper drainage of condensate water complete all as specified and as directed. 252 Repairs/ Replacement of internal electrification including fittings and fixtures of buildings at 42 WEUunder GE (AF) Tvm 253 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as directed. 254 M&L for point wiring complete with 1.5 Sqmmsingle core FRLSH PVC insulated sheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessoriesconcealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including2mmModular metal flush Box and suitable Modular white cover plate with frame andall as specified and directed. 255 One fan/light /bell point controlled by one switch/bell push 256 One switch socket outlet 5 Amps on independent board 257 One 3 pin socket outlet, 5 Amps on the same board with other swictches with cables 1.5 Sq mm size all as directed. 258 All as per Item No 257 here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for power Socket on independent board on the existing/new PVC surface conduit all as directed. 259 Supply and fix in replacement switch piano flush button single pole oneway 6 amps all as directed. 260 Supply and fix in replacement socket flush type 2 in 1, 3 pin 6 amps. 261 Supply and fix switch socket combination 3 pin 5 Amps flush type in repairs. 262 Supply and fix switch socket combination 6A/16 A , 5 in 1 flush type , universal flush type. 263 Supply and fix in replacement ceiling rose surface bakelite with three terminals all as directed.Make- Anchor/Havells/Legrand. 264 Supply and fix bell push flush type 5 Amps 230V singlepole all as directed. Make- Anchor/Havells/Legrand. 265 Supply and Replaceelectric bell Ding Dong, AC 230 voltsall as specified. Make- Anchor/Havells/Legrand. 266 Supply and Replace buzzer, AC 230 voltsall as specified. Make- Anchor/Havells/Legrand. 267 S & F electronic type fan regulator rotary step 120/280 watt all as specified and directed. Make- Anchor/Havells/Legrand 268 Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit with two runs of 4 Sq mm and one run of 4 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid connduit includung accessories such as bends, supports etc all as specified 269 Taking down unserviceable MCB distribution board, S & F SPN 4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed.Make- Anchor/Havells/Legrand. 270 All as per item No 269 here in before but SPN 8 way. Make- Havells/Legrand/ABB 271 All as per item No 269 here in before but SPN 12 way. Make- Havells/Legrand/ABB 272 Supply and fix in replacement sheet metal enclosure distribution board for fixing MCBs with double door, TPN 4 way, 415 volts with suitable bus bar complete all as directed. Make- Anchor/Havells/Legrand. 273 Disconnecting and removing the existing metal plug and socket and and provn ofmetal plug and socket single phase two pin and earth plug with MCB, SP 20 Amps and steel enclosure. Make- Anchor/Havells/Legrand. 274 Removing of exsitingCeiling fan 1200mm sweepfrom postion, painting with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, kept in safe custodyand refixing after completion of work to postion, alongwith required accessoriesin new postion as directed 275 All as per Item No.274 above but for exhaust fan 300mm sweep including replacing of rusted nut and bolts. 276 M & L for cutting & removing the burnt winding of ceiling fan of 1200mm sweep and cleaning the slot, rewinding with super enamelled copper wire of suitable size, varnishing heating and insulating and reassembling the spares complete all as specified. 277 All as per item No. 276 above but for exhaust fan 300mm sweep. 278 Supply and Replacecapacitor 2.5 mfd suitable for ceiling fanMake – KELTRON/KEIL/BHEL/UNIVERSAL/TIBCON 279 Supply and Replacecapacitor 4 mfd suitable for exhaust fan. Make – KELTRON/KEIL/BHEL/UNIVERSAL/TIBCON 280 Disconnecting and removing the old unserviceable light fitting box type 1 x 40W / 1 x 28 Watts T-5 fitting and supply and fix new energy efficentLED batten 1 x 20 watts 4 feet long CRCA body powder coated whitebatten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete all as directed. Make; Havells/Wipro/Crompton 281 Disconnecting and removing the old unserviceablelight fitting box type 1 x 20W / 1 x 14 Watts T-5 fitting and supply and fix new energy efficentLED batten 1 x 10watts 2 feet long powder coated white batten type all prewired including LED tube and connection with twin core flexible PVC 0.5 Sqmm complete all as directed. Make- Havells/Wipro/Crompton 282 Removing existing Unserviceable surface mounting light fittings CFL 36 watt typeand supply and fix surface mounting LED light fittings1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for armstrong/grid/POP false ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton 283 Removing existing Unserviceable recess mounting light fittings CFL 36 watt typeand supply and fix recess mounting LEDlight fittings1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for fitting infalse ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton 284 Supply and fix inreplacement 415V 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning MCB TPN40A- 100A 285 Supply and fix only the MCB/RCCB 240V,50Hz,AC with repturing capacity 10kA of the following capacities all as specified and as directed. Make-Havells/Legrand/ABB. 286 MCB SP 6A - 32A 287 RCCB Double pole, 30mA 25 A 288 SPN 32 AMP 289 Maint/ Repair of water supply distribution system repair of pump sets, shallow wells and allied works at 42 WEU at GE (AF) Tvm 290 Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth forlaying UG cable/steel tubing etc and getting out in hard/dense soil complete all as specified and directed. 291 Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm thick with soil complete all as specified and directed. 292 Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 293 Taking up or down steel tubing and connections of size 25mm dia bore including cleaning for refixing or removal to store complete all as specified and directed.Note: Excavation and earth work shall be measured and paid seperately 294 All as per item No. 293 here in above but of size 50mm dia bore 295 Supply and laying and testing ofmedium grade galvanised iron steel tubing of size 25mm dia bore, ISI marked, including GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tees, checknuts, caps, plugsetc complete laid in trenches/floors etc complete all as specified and directed. Make : Jindal/Tata/Prakash 296 All as per item No. 295 here in above but of size 50mm dia bore 297 Taking up or down UPVC(Unplaticised PVC)pipe and connections of size 25mm dia bore including cleaning for refixing or removal to store complete all as specified and directed.Note :Excavation and earth work shall be measured and paid seperately 298 All as per item No. 297 here in above but of size 50mm dia bore 299 Supply and fix replacement 3-layer UPVC pipes of pressure rating 10 kgf/sqr cm having thermal stabilityincluding all UPVC plain and brass threaded polypropylene random fittings fixed for size 25mm dia bore complete to walls,ceillings or in floorscomplete all as specfied and directed 300 All as per item No. 299 here in above but of size 50mm dia bore 301 S & F in replacement of Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of size 25mm diabore and conforming to IS 778 of 1984 complete all as specified and directed.Make : Leader/Kirloskar/Zoloto 302 All as per item No. 301 here in above but of size 50mm dia bore 303 S & F in replacement of gun metal non return valve of 50 mm dia bore, screwed complete all as specified and directed.Make:leader/ Kirloskar/ zoloto 304 S & F in replacement of CIfoot valveBall type flanged end of size 50mm dia bore, flanged/as per IS - 4038 with nuts, bolts and gaskets etc complete all as specified and directed. Make Normax,/Kirloskar/ Leader 305 S & F in replacementofDOL starter suitable for induction motor of current rating 2 to 6 A, 3 Phase 415 Volts, 50 Hz AC complete all as specified and directed.Make: L&T/ siemens/Schineder 306 Dismantling three phase 440 volts motors of 3 HP capacities, cutting and removing burnt motor winding, cleaning the slots and rewinding with approved quality super enamelled copper conductor winding wire of existing size and capacity including insulating materials, varnishing baking etc and reinstalling in existing position, testing etc complete all as specified and directed. 307 M & L for cleaning Static water tank of 15000 ltr capacity by draining/ pumping out completely , cleaning with high pressure pump and pipe lines for removing scales, algae,silt accumulated at the bottom of the tank, flushing out completely and cleaningthe tank usingchlorine based disinfectans like sodium hypochlorite (liquid beach) or Hydrogen peroxide of not less than 10 KG using high pressure dosing pump and keep it for min 4 hours to the bacteria and painting the wall with food grade synthetic paint and keeping in UV light for minimum of 2 to 3 hrs, writing the date of cleaning and capacity on outside of sump in bold letters etc as per the existing colour and fontcomplete all as specified and directed.
Contract Date: Dec 02, 2025 Contract Value : ₹ 27.42 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Kerala View Result →
46.
Defence #8325783 AOC
Tender For Repair And Cleaning Of Sewage Line, Manholes, Septic Tanks, Soakage Wells Etc And Certain Misc Works In Zone ‘A’ And Zone ‘B’ At Shahjahanpur Cantt Under Ge (East) Bareilly; 1 Cleaning /clearing blocked sewage line 100mm to 300mm dia (PVC/ SGSW/RCC hume pipe) any depth by rodding between manhole to manhole manually incl pumping out sludge water from manholes septic tank/soak well etc (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 30 mtr delivery pipe including clearing spot blockages of WC, wash hand basins, sinks floor traps, NT and drainage pipes etc withand incl 2 safaiwala at 0900hrs to 1700 hrs on working days incl disposal of debris spoils and sludge hygiencially complete all a specified and directed.(Notes:- i) The contractor /his authorise supervisor of the work will report daily at complain cell AGE B/Rat0830 hours to receiveday to day complaints.ii) All sewage complaints must be attended immediatly on receipt but not later than 24 hours. iii) Recovery (penalty ) for not attending complaint beyond 24 hours shall be Rs. 100.00 per compaints per day delayed 2 Digging out sludge etc from oxidation pond, septic tank, sump well, man holes including depositing in pits where directed to a distance exc 50m but n exc 250m complete all as specified and directed .Note- The unitrate quoted under this item shall deemed to include all the arrangement ofnecessary T&P with man and materialfor lifting up sludge from oxidation pond, septic tank, sump well, man holes,excavation ofpit ,deposing sludge and cover with earth complete all as specified and directed. 3 Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for complete. 4 M&L cementconcrete 1:2:4 tpe-B1 as in landings, cover slabs (for manholes etc) Chula hoods, chajjas, water through managers shelves and similar articles with plain faces set in cementmortar 1:4 complete all as specified. 5 M&L precast cement concrete with outer MS lining & reinforcement of size exc 0.3 sqm and n exc 1 sqm,75 mm thick with handle,etc 6 M&L mild steelbars (TMT) 10mm dia, and overcut to lengthbent to shaperequired includingcranking, bendingspirally for hopingends forcolumns, hookingends and bindingwith andincludingmild steelwire annealed not less than 0.9 mm dia or securing with clips 7 Excavatingin trenches , not exceeding 1.5 mtr widebut not exceeding1.5 m in depthfor foundation etc or for shafts, well cess pits manholes, pier holes etc and gettingout in soft/loose soil completeall as specified. 8 All as per Srl item No 7 here in before but exc 1.5 m but n exc 3 m in depth 9 Demolition and breaking up drain pipes 200mm internal diaof pipe (Salt glazed stone ware) , AC or Reinforced concrete) set in cement mortar. 10 Demolition and breaking up drain pipes 150mm internal diaof pipe (Salt glazed ware , AC or Reinforced concrete) set in cement mortar. 11 M&L200mm boreRCC NP2 stone ware drainpipe laidin trenchesand jointedas specified. 12 M&L 150mm bore RCC NP2 stone waredrain pipes laid intrenchesand jointedas specified. 13 M&L plaincementconcrete(1:4:8) type D2 (using 40mm graded stone aggregate)bedto 200mm bore drain pipes including packingunderand hunchingagainst thesidesofthe pipesafter they arelaidand tested in. complete all as specified and directed. 14 M&Lplain cementconcrete(1:4:8) type D2 (Using 40mm graded stone aggregate) bed to 150mm bore drainpipes includingpacking under hunchingagainst the sides of pipes afterthey are laidand tested in complete all as specified and directed. 15 Retuning, fillingin includingspreading, levellingwateringand wellrammingin layer not exceeding25cm thick in soft/loose soil completeall as specified. 16 Removingexcavatedmaterialssoils not exceeding50m anddepositingwhere directed at a levelnot exceeding1.5m abovethe startingpoint complete all as specified. 17 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level). 18 M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed. 19 Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd. 20 M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed. 21 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for. 22 M&L for cement concrete (1:5:10) type E-2 as infoundation filling and mass concrete 23 M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mmmicron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where requiredover 10 mm thick rendering in CM 1:4 includingintegral waterproofing compound 3% and taking down existing plasteringas per manufacturer instruction and complete all as specified and directed 24 Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles 25 M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. 26 M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed 27 Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. 28 M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement 29 M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified 30 M&L for two coats of cement base paintincl preparation of newsurface of wall complete all as specified and as directed. 31 M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified 32 M&L preparation of old decorated surfaces & applying one coat of white wash on ceiling complete all as specified and directed. 33 M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed. 34 M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd. 35 Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises 36 M & L Glazed ceramic coloured tilesin vertical surface 350 mm x 250 mm x 7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white cementor colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed. 37 M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to matchcoloured tiles including 15 mm thick cement screed bed in CM 1:6complete all as specified and as directed. 38 M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etcincluding 15 mm thick screed bedin CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement incluto matchcoloured tiles complete all as specified and as directed. 39 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. 40 S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. 41 S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC C channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing. 42 S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed. 43 S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 44 S&F, 150 mmaluminium handles cast type, anodised complete all as specified and as directed. 45 S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. 46 Supply only plastic water closet seat cover closed pattern with flat bottom and coverand mild steel chromium plated or aluminium hinging device 47 S&F in repair vitreous china squatting pan orissa pattern size 580mm*440mm white with integral foot rests excluding flushing cistern and flush pipe all as specified and directed 48 S&F in repair for CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified an directed. 49 Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed 50 All as above herein before but 20 mm dia 51 S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 52 Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceilingand wall all as specified and dircted 53 S&F, GI tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors. 54 Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceilingand wall all as specified and dircted 55 Dismantling ofexisting water tanks capacityn exc 500 ltr and removing to store 56 Dismantling ofexisting water tanks capacityexc 500 ltr n exc 1000Ltsand removing to store 57 S&F rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) hoistedand fixed in position all as pacific SSR Part- I 58 S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoistedand fixed in position all as pacific SSR Part- I 59 S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms). 60 S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 61 S&F in repairvitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified 62 S&Fin repairs 15mm bore pillar tap cast copper allloy with capstan headChromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. 63 S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified. 64 S&F in repair15mmbore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms). 65 Taking down old 110/75mm borePVC(SWR) pipes in any position .complete all as specified and directed. 66 S&Fin repair 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed. 67 S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches orall as specified and directed. 68 S&F 75 mm bore.PVC(SWR) junction single (single T)equal or unequal with access door.complete all as specified and directed. 69 S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints fixed to wall all as specified and directed. 70 S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed. 71 S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door.complete all as specified and directed. 72 S&F 110 mm dia PVC (SWR) vent cowl. .complete all as specified and directed. 73 S&F 110 mm PVC (SWR) bend any radius.complete all as specified and directed. 74 S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.complete all as specified and directed. 75 S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed 76 S&F,20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 77 Supply and fix 32mm/40mm dia waste pipe for wash hand basin/urinals complte all as specified and directed 78 S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose with chromium plated nuts complete all as specified and directed. 79 S & F in Repair 10 ltrs capasityPVC valveless syphonic action typeflushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high densityor PVC 32 mm dia for low level cistern complete all as specified and as directed. 80 S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) 81 S&F (in repairs) angle cock cast copper alloy chromium plated fancy type screwed both end for iron pipe or or brass ferrulefor 15 mm bpre of pipe complete all as specified and as directed. 82 S&F (in repairs) Stop cock (Concealed)cast copper alloy chromium plated ,screwed both end for iron pipe or or brass ferrule with long shank and cupfor 15 mm bpre of pipe complete all as specified and as directed. 83 S&Fin repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified 84 S&F (in repairs) Bib taps cast copper alloychromium plated ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..
Contract Date: Nov 26, 2025 Contract Value : ₹ 24.30 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
47.
Educational and Research Institute #8295208 AOC
Nit For Supply Of Surgical Items At Rims, Ranchi , Surgical Items : , Absorbable Gelatine Spoons Tampon Size 80Mm X 30Mm , Absorbent Cotton Roll, 400Gm Nett , Absorbent Cotton Roll, 500Gm Nett , Air Cushion , Air Way Disposable (Different Size) , Ambu Bag (Adult Size ) 100% Silicon Material Only , Ambu Bag (Neonatal Size ) 100% Silicon Material Only , Ambu Bag (Paediatric Size ) 100% Silicon Material Only , B.P Blade (Size 10 To 24) , Bain Circuit (Pediatrics Size) , Bandage Than (100Cm X 20 Mtr) As Per Schedule F-Ii , Bandage Than (90Cm X 18 Mtr) As Per Schedule F-Ii , Banin Circuit (Adult Size) , Bed Pan (Plastic) , Blood Lancet , Blood Line Tubbing Set , Blood Transfusion Kit , Consist Of B T Set, I V Canulla, Canulla Fixator, Syringe With Needle 5Ml, Alco Swab , Bone Wax , Catheter Introducer , Central Line F (Femoral Double Lumen Size 7, Length 20 Cms, Usfda Approved) , Central Line F (Femoral Tripal Lumen Size 7, Length 20 Cms,Usfda Approved) , Colo Bag , Colostomy Kit , Crepe Bandage 4 Inch , Crepe Bandage 6 Inch , Disposable Face Mask ( 3 Layer) , Disposable Gloves For Examination - Poly, Non Sterile , Disposable Gloves For Examination - Powder Free, Odourless ,Non Sterile , Disposable Nurses Cap , Disposable Shoe Cover , Disposable Surgeon Cap , Disposable Syringe With Needle(Non Reusable) 10Ml , Disposable Syringe With Needle(Non Reusable) 20Ml , Disposable Syringe With Needle(Non Reusable) 2Ml , Disposable Syringe With Needle(Non Reusable) 3 Ml , Disposable Syringe With Needle(Non Reusable) 5Ml , Disposable Syringe Without Needle(Non Reusable) 50Ml , Disposable Tuberculin Syringe , Double Lumen Femoral Catheter , E.C.G Jelly - 250 Gm , E.C.G Jelly - 5 Kg Jar , E.C.G Paper Size 280Cm X 215Cm , E.E.G Paste 250 Grm , Ecg Paper 3 Channel 80Mmx20mtrs , Elastic Adhesive Bandage Size 10Cm 4/6 Mtr. (Stretched Length) , Electrodes For E.C.G. , Endotracheal Tube Disposable - Pvc , Cuffed 2.0 To 10.0 , Endotracheal Tube Disposable - Pvc , Plain 2.0 To 5.0 , Enema Can , Et Tube All Size , Eye Drape , Femoral Catheter , Gauge Than(18Mtr X 90Cm) As Per Schedule F-Ii , Gluco Strip(Glucometer Need To Besupplied Free Of Cost,Usfda Approved ) , Hot Water Bag (1Ltr Cap) , I.V. Cannula Fixator With Semipremeabke Transparent Flim With Pad , Ice Caps , Ice Caps , Laryngoscope With Disposable Blades O Should Meet International Quality Standards.O Equipment Should Have Anti Fog Lens And White Led Light Sourceo Monitor Should Have Video Output Capability To Be Compatible With External Monitor And Recording Devices.O It Should Work On Common Batteries And Can Be Used Continuously For More Than 1 Hour.O The Disposable Blade Should Have Design To Provide Minimal Lifting Of Soft Tissue And Impact On Teeth During Laryngoscopy And Intubation. Display Monitor Can Be Attached To The Blades. O It Should Be Supplied With Disposable Blades 10 Each Of Both Channelled And Non-Channelled Blades.O Should Have Iso And Ce Marks Confirming To International Standards Of Safety , Leucoplast 4X5mtr , Macintosh Sheet , Metal Skin Staple Extractor , Mini Vac Set , Nasal Oxygen Catheter , Nubulizer Tubing Mask Adult & Pediartic , Paediatric Drip Set , Pediatric Breathing Circuit Disposable , Plain Rubber Catheter , Quinke Type Spinal Needle, Size 25 For Adult , Quinke Type Spinal Needle, Size 26 For Adult , Quinke Type Spinal Needle, Size 27 For Adult , Ryles Tube -Pvc Adult Size , Ryles Tube -Pvc Paediatric Size , Ryles Tube -Pvc With Silicon Elastometer Coating -Adult Size , Ryles Tube -Pvc With Silicon Elastometer Coating -Paediatric Size , Scalp Vein Set (Different Sizes) , Silicon Foleys Catheter All Size , Sterile Gauze Swab- 12 Ply , Sizes- 10Cm X 10Cm , Sterile Gauze Swab- 12 Ply , Sizes- 5Cm X 5Cm , Sterile Gauze Swab- 12 Ply , Sizes- 7.5Cm X 7.5Cm , Surgeon Gloves (Latex,Sterile,Isi Marked) Size 6.0 , Surgeon Gloves (Latex,Sterile,Isi Marked) Size 6.5 , Surgeon Gloves (Latex,Sterile,Isi Marked) Size 7.0 , Surgeon Gloves (Latex,Sterile,Isi Marked) Size 7.5 , Surgeon Gloves (Latex,Sterile,Isi Marked) Size 8.0 , Surgeon Gloves (Latex,Sterile,Isi Marked) Size 8.5 , Surgeon Gloves (Sterile, Powder Free & Polymer Coated) Size 6.0 To 8.0 , Surgeons Gloves (Latex Resuable,Sterile,Isi Marked) Size 6.0 To 8.5 , Three Way Catheter , Tube Extension For 3 Way Stop Cock, 10Cm , Ultrasound Jelly 250 Gm , Ultrasound Jelly 5 Kg Jar , Urinal ( Plastic) , Urine Collection Bag - With Hanger & Bottom T-Type Outlet (For Adult) , Urine Collection Bag - With Hanger (For Paediatric) , Water Bed , Disposable Semiautomatic Biopsy Instruments Kit. ; Having Dual Penetration Throw 10Mm And 20Mm. ; Should Be Available With One Gauge Lower Compatible Coaxial Needle With Fire Ready Indicator. ; Should Be Available With A Blunt Tip Needle. Sizes Are- 18Gx16cm, 18Gx10cm, 20Gx16cm ; Should Be Us Fda And Ce Approved , Straight Supraglottic Airway ; O It Should Be Straight, Designed For Use Both In Anaesthesia And Emergency Medicine ; O Cuff And Airway Tube Should Be Moulded As A Single Unit For Safety - No Separation ; O The Cuff Should Have Reinforced Tip To Avoid Kinking During Insertion ; O The Pilot Balloon Should Provide Mask Size & Tactile Indication Of Degree Of Inflation ; O It Should Allow Placement Of Maximum 6.5 Et Tube Through The Airway ; O It Should Have Depth Marks For Monitoring Correct Positioning Of The Mask ; O It Should Provide Maximum Intra-Cuff Pressure Of Up To 60 Cmh20 ; O It Should Have 15 Mm Male (Iso) Airway Connector ; O It Should Be Disposable, Eliminating Chances Of Cross Contamination ; O It Should Be Made Of 100% Latex-Free Medical Graded Material ; O Should Be Available In All Standard Sizes To Accommodate Any Age Group Of Patients ; O It Should Be Mr Safe ; O Should Be Us Fda, Ce & Iso Certified For Quality Assurance , Hme Bacterial Filter , Micro Drip Infusion Seto Micro Drip Infusion Set With Drop Size Reduced To 60 Drops Per Ml For Paediatric And Critical Therapy. ; O Manufactured From Non-Toxic, Clear And Transparent P.V.C. Material. ; O Sharp Piercing Spike For Easy Insertion In Fluid Container Along With Built-In Preventive Bacterial Air Vent. ; O Infusion Set Has A Cylindrical Collapsible Drip Chamber For Proper Visualization Of The Drop Rate. ; O Provided With Disc Type Fluid Filter To Filter Any Particulate Matter In The I.V Fluid. ; O Long Super Smooth Kink Resistant Tubing With Efficient Roller Controller For Accurate And Unrestricted Flow. ; O Y Type Injection Port Made Up Of Silicone Provided For Extra Medication. ; O Luer Lock Connector For Secure Fitment To All Standard Devices. ; O Sterile And Individually Ribbon Packed. , 0.1 Gperaceticacid ; Other Ingredients : Corrosion Inhibitors, Surfactants, Stabilising Agents, Excipients. Hydrogen Peroxide, Acetic Acid ; Passes En 13624, En 13727, En 14348, En 14347, En 14476 Standards , 100 G Of Granules Contain The Following Active Ingredients: 43 G Sodium Per Carbonate, 22 G Tetraacetylethylenediamine. ; Passes En 13624, En 13727, En 14348, En 14561, En 14562, En 14563, En 13704 And En 14476 Standards, , 205 Disposable Hose , 316L Stainless Steel,Endo Mechanical Angled Head Contains 35 Staples Staplers , 5 Leads Ecg Limb Leads , 60Mm Disposable Linear Cutter Stapler , 80Mm Disposable Linear Cutter Stapler , 900Mr805electrical Adaptor - Dual Heated, Rt Circuits , 900Mr869probe, Airway Temp & Flow, For Use With 1.5M Circuits . With Right Angle Connector, , 900Pt913filter For Airvo 2, Pack Of 2 , Abdominal Drainage Kit O Specially Designed Kit For Post-Operative Abdominal Drainage. ; O Consists Of Super Smooth Drainage Catheter Along With A Collection Bag. ; O Made From Non-Toxic And Non-Irritant Medical Grade Pvc. ; O Provided With Specialised Foldable Handle Which Holds The Tube Upright, Prevents Accidental Kinking During Handling And Suitable For Bedside Hanging. ; O Soft And Smooth Catheter With Large Atraumatic Eyes For Efficient Drainage. ; O Radio-Opaque Line Throughout Catheter Length Help X-Ray Visualization. ; O Catheter Is Colour Coded For Instant Size Identification. ; O Sterile, Individually Packed In A Peelable Pouch. Size: 16Fg/20Fg/24Fg/28Fg/32Fg , Abdominal Pad / Gauze Sponge With X-Ray Thread,12 Ply Different Size 20 Cm X20cm , Abdominal Pad / Gauze Sponge With X-Ray Thread,12 Ply Different Size 25 Cm X25cm , Abdominal Pad / Gauze Sponge With X-Ray Thread,12 Ply Different Size 30 Cm X30cm , Abdominal Pad / Gauze Sponge With X-Ray Thread,12 Ply Different Size 45 Cm X45cm , Absorbable Gelatine Sponge Piles Pack Tampon ,80Mm*30Mm , Absorbable Gelatine Sponge,80Mm*50Mm*10Mm , Act Tube , Acumen Iq Sensor: A. It Must Be Compatible With Hamo Sphere Monitor. B. It Must Able To Provide Co,Ci,Svv,Ppv,Sv,Svi,Svri,Svr, Hypotension Prediction Index, Dp/Dt, Eadyn. , Adhesive Plaster (10Mtr X 7.5 Cm) , Adult Bp Cuff , Adult Bp Cuff , Adult Diapers- Extra Large , Adult Diapers-Large , Adult Diapers-Medium , Adult Electrodes With Mvp Gel For Zoll Defibrillator , Aerogene Pro Adult Tee With Silicone Plug (Autoclavable) (Pkt 5) , Aerogene Pro Control Module Kit - International , Aerogene Pro Filler Cap (Pkt 5) , Aerogene Pro Mask Kit Intl (Inc. Vented Elbow & 22 Mm F/22 Mm M Elbow) (Autoclavable) (Pkt 5) , Aerogene Pro Nebuliser Assembly , Aerogene Pro Paediatric Tee With Silicone Plug (Autoclavable) (Pkt 5) , Aerogene Pro Usb Controller Starter Kit , Aerogene Pro-X Controller Only , Aerogene Solo Single Patient Use Mask Kit Intl (Pack Of 5) , Aerogene Solo Single Patient Use Vented Elbow (Pack Of 5) , Aerosol Oxygen Mask Adult/Ped , Air Cushion Mask , Airway Sets Combi Tube Sets Size Fr.37 , Airway Sets Combi Tube Sets Size Fr.38 , Airway Sets Combi Tube Sets Size Fr.39 , Airway Sets Combi Tube Sets Size Fr.40 , Airway Sets Combi Tube Sets Size Fr.41 , Anaesthetic Tube Holder , Anatomically Curved Supraglottic Airway O It Should Be Anatomically Curvedfor Fast And Easyinsertiono The Cuff Should Have Reinforced Tip To Avoid Kinking During Insertiono Cuff And Airway Tube Should Be Moulded As A Single Unit For Safety - No Separationo The Pilot Balloon Should Provide Mask Size & Tactile Indication Of Degree Of Inflationo It Should Allow Placement Of Maximum 7.0 Et Tube Through The Airwayo It Should Have Depth Marks For Monitoring Correct Positioning Of The Masko It Should Have D-Shaped Airway Tube Design For Firm Grip During Insertiono It Should Provide Maximum Intra-Cuff Pressure Of Up To 60 Cmh20o It Should Have 15 Mm Male (Iso) Airway Connectoro It Should Be Disposable, Eliminating Chances Of Cross Contaminationo It Should Be Made Of 100% Latex-Free Medical Graded Materialo It Should Be Mr Safeo Should Be Available In All Standard Sizes To Accommodate Any Age Group Of Patientso Should Be Us Fda, Ce & Iso Certified For Quality Assurance , Anesthesia Circuit O A Co-Axial Modification Of The Basic T-Piece System, Developed To Facilitate Scavenging Of Waste Gases. ; O The Process Includes Patient Inspiring Fresh Gas From The Outer Reservoir Tube And Expiring Into Reservoir Tube. ; O Convenient, Lightweight Anesthesia Delivery System. ; O It Is Based On Mapleson D System, Provided With A Corrugated Tube, Expiratory Valve And Antistatic Bag. ; O The Modification Improves Clinical Utility. ; O It Is Simpler, Has Single Tube Convenience And Low Resistance To Breathing. ; O Compact And Inexpensive With Low Dead-Space. ; O Sterile And Individually Packed. , Annuloplasty Ring , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 7.5X7.5 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified.Usage- Upto 7 Days. Size- 10X10 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 12.5X12..5 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified.Usage- Upto 7 Days. Size- 23X23 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 17.5X17.5 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 10X20 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 10X25 Cm , Antimicrobial Five Layered Highly Absorbent Foam Dressing With Activated Carbon And Sliver Content 1.2Mg/Cm2, Active Release For 168Hrs (7 Days) With Self Adherent Borders And With Soft-Silicone Safetac Wound Contact Layer For Atraumatic Dressing Removal. Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 10X30 Cm , Arotic Cannula , Av Cassette Blood Lines Adults + Filtrate Line(A/V 143 Ml) , Ayre”S Spatula For Cervical Pap Smear – Sterile Ayre Spatula, Wood / Plastic Lenght: 18 Cm / 18.8 Cmindividually Packed In Sterile Pouch, In Box Of 100 , Baby Delivery Cloth/Kit , Baby Drapefor All Kind Of Surgeries N Baby . Translucent Sof Poly Film Size 1.2 X 1.2M Incise Area 25 X 20Cm Eto Sterlized. 5Year Expiry Self Life. Packing Material 45Gsm Polypropylene One Side And Another Side Tyvek Paper Packing. , Bacteria Filter Membrane , Bacteria Filter Membrane , Baladder Wash Syringe , Balloon Frontal Sinus Kits(Each Kit Consist Of 1 Balloon, 1 Guide Catheter ,1 Latch,1 Illumination Wire) , Balloon Maxillary Sinus Kits(Each Kit Consist Of 1 Balloon, 1 Guide Catheter ,1 Latch,1 Illumination Wire) , Balloon Sphenoid Sinus Kits(Each Kit Consist Of 1 Balloon, 1 Guide Catheter ,1 Latch,1 Illumination Wire) , Bcd With Delvido , Big Knife For Grossing Tissue , Biological Indicator , Biopatch Protective Disc With Chg - Biopatch Antimicrobial Dressing,1 Disk (2.5 Cm) W/4.0 Mm Center Hole , Biopatch Protective Disc With Chg - Biopatch Antimicrobial Dressing,1 Disk (2.5 Cm) W/7.0 Mm Center Hole , Biopatch Protective Disc With Chg - Biopatch Antimicrobial Dressing,3/4 Disk (1.9 Cm) W/1.5 Mm Center Hole , Bipolar Forceps Handle Flat & Insulated , Bladeless Trocars With Tissue Separatingflap - 10Mm Contain- Two 10Mmo100mm Sleeve/Cannula And One 10 Mm Obturator , Bladeless Trocars With Tissue Separatingflap - 12Mm Contain- Two 12Mmo100mm Sleeve/Cannula And One 12 Mm Obturator , Bladeless Trocars With Tissue Separatingflap - 5Mm Contain- Two 05Mmo100mm Sleeve/Cannula And One 05 Mm Obturator , Blood Transfusion Set O Conforms To Iso 1135-4 Standard. ; O Sharp Non-Vented Spike Suitable For Blood Bags And All Type Of Standard Blood Containers. ; O Provided With A Cylindrical Drip Chamber With 200? Filter To Prevent The Passage Of Any Clot Into The Chamber. ; O Flash Ball Type Injection Port For Extra Medication. ; O Comes With Smooth 150 Cm Long, Kink Resistant Tube. ; O Efficient Roller Controller For Accurate Adjustment Of Transfusion Rate. ; O Sterile, Individually Packed. , Bone Cement , Bone Cutter , Bone Marrow Aspiration Needle ; Jamshidi Bone Marrow Aspiration Needle ; Sizes Are- 18G And 15G ; Should Be Us Fda And Ce Approved. , Bone Marrow Aspiration Needle –Metal,Reusable , Salah Type With Component Includingtrocar , Cannula & Adjustable Side Guard, Size –No 14 , No – 16 & No – 18 G , 5 Cm Longneedle , Bone Marrow Biopsy Needle Should Be T-Handle With Trocar-Tapered Stylet Point And A Triple -Crown Cannula Tip. ; Sizes:- 13G X 9Cm, 11G X (10Cm/15Cm) And 8G X (10Cm/15Cm).Should Be Us Fda And Ce Approved. , Bone Marrow Biopsy Needle- Ergonomic Handle.Material : Stainless Steel, Remover Guide Provided With Indicators To Facilitate The Sample, Expulsion And That Allows,Samples Length Check, Provided With A Special Lock For A Safe Removal Of The Sample , Bone Marrow Biopsy Needle ; Original Jamshidi With Sharp Bevel Tip. ; Sizes:- 13G X (5Cm,9Cm), 11G X (10Cm, 15Cm) And 8G X 10Cm. ; Should Be Us Fda And Ce Approved , Bone Marrow Needle No.16 , Bone Marrow Needle No.18 , Brain Biopsy Cannula (Needle) Diff Diameter , Breathing Exercisero Breathing Exerciser. ; O Innovative System To Exercise Respiration Through Inspiration. ; O Specially Designed With 3 Stage Chambers To Provide For Efficient Exercise To Patient On A Step Up Basis. ; O Device Comprises Of Base Plate With Central Part Containing Volume ; Designated Three Chambers With A Colored Sphere. ; O The Central Part Is Attached To A Kink-Resistant Tube With A Mouth Piece With An Integrated Filter. ; O Three Spheres Rise Proportionately To The Inspiration Exerted By The User. ; O Innovative Design, Can Be Dismantled Into Parts For Cleaning And Disinfection. ; O Non Sterile, Individually Packed In A Box , Bulb Irrigation Syringe O Bulb Irrigation Syringe. ; O Syringe Barrel Manufactured From Pp And Adjoining Bulb From Tpe. ; O Indicated For Varied Applications Like Wound Cleansing, Urinary Bladder Irrigation, General Medical Or Surgical Irrigation, Suction Applications And Feeding Or Aspiration. ; O Syringe Consists Of Catheter Mount Centric Nozzle Which Is Compatible To ; Catheter Connectors. ; O Tapered Tip Facilitates Easy And Safe Connection To Any Catheter Or Gastric Tube. ; O Finger Flanges On The Syringe Help In Firm Grip And Facilitate Controlled And ; Precise Pumping. ; O Flanges Also Prevent Accidental Roll-Over Of The Syringe. ; O Soft Transparent Bulb Facilitates Easy Pumping And Suction. ; O Sterile, Individually Packed In A Peelable Pouch. , Bupivacaine Injection 0.5% (Glass Vial) , Bvf Filter Adult , Bvf Hme Filter Adult , Bvf Hme Filter Paed , Cabg Kit 1. Cardio Drape - 1Nos. Material: 77Gsm Sms Non-Woven Porus One Side Another Side Laminated. Cautery Bag 4Inbuilt Incise Drape With Iodine Adhesive Coating. Inbuilt Water Proof Laminated Drape Size 1.20M X 1.20M Drape Size : 2.4M X 4.1M. 2. Main Drape (U Split With Perineal Drape) 1 Nos. Material:Sms Non Woven Laminated Drape. Size240x 260Cm. 3.Under Patient Sheet. 1Nos. Material : Water Proof Sms Non Woven Fabric. Size: 140X 180Cm. 4. Adhesive Towel2 Nos. Material : Sms Non Woven With 2 Adhesive Strip. Size: 100X100cm. 5. Shoe Cover. 1Nos.6. Feet Holder. 1Nos. 7. Hand Towel 4 Pcs. 8. Full Gown Eco Wrap Around2nos.Sterlized Pack. Packing Material 45Gsm Polypropylene One Side And Another Side Tyvek 25Gsm Paper Packing. 5Years Expiry Life. , Catheter Mount O Specialised Catheter Mount With Double Ports For Specific Application. ; O Corrugated Tube Made Up Of Medical Grade Pe Offers Durability, Flexibility And Strength. ; O Double Flip Tap Cap With Seal Having Provision For Both Bronchoscopes As Well As For Suctioning. ; O Opening The First Tab On The Cap Allows For The Introduction Of A Bronchoscope Whilst Maintaining Airway Pressure And Opening The Second Tab Allows For Suctioning If Required. ; O Double Swivel Elbow With 15 Mm I.D. / 22 Mm O.D. Connector Fits All ; Standard Tracheal Tubes. ; O 22 Mm Standard Female Connector Is Compatible With All Breathing And Ventilator Circuits. ; O Sterile And Individually Packed. , Central Cath Arterial Line All Size , Chest Valve , Chiba Needle ; Sizes Are- 18Gx15cm, 18Gx20cm, 20Gx10cm, 20Gx15cm, 20Gx20cm ; Should Be Us Fda And Ce Approved , Chromic Gut Suture, With Needle, Size 1, 100Cm, 1/2 Circle Rb Heavy 50Mm , Chromic Gut Suture, With Needle, Size 1, 100Cm, 1/2 Circle Rb Mayo 45Mm , Chromic Gut Suture, With Needle, Size 1, 152Cm, 1/2 Circle Rb Heavy 40Mm , Chromic Gut Suture, With Needle, Size 1, 76Cm, 1/2 Circle Rb Heavy 40Mm , Chromic Gut Suture, With Needle, Size 1-0, 100Cm, 1/2 Circle Rb Mayo 45Mm , Chromic Gut Suture, With Needle, Size 1-0, 152Cm, 1/2 Circle Rb 30Mm , Chromic Gut Suture, With Needle, Size 1-0, 76Cm, 1/2 Circle Rb 30Mm , Chromic Gut Suture, With Needle, Size 1-0, 76Cm, 1/2 Circle Rb 40Mm , Chromic Gut Suture, With Needle, Size 2, 100Cm, 1/2 Circle Rb Mayo 45Mm , Chromic Gut Suture, With Needle, Size 2, 152Cm, 1/2 Circle Rb Mayo 45Mm , Chromic Gut Suture, With Needle, Size 2-0, 76Cm, 1/2 Circle Rb 30Mm , Chromic Gut Suture, With Needle, Size 2-0, 76Cm, 1/2 Circle Rb 40Mm , Chromic Gut Suture, With Needle, Size 3-0, 76Cm, 1/2 Circle Rb 20Mm , Circuit Adaptors Size 15M/22F , Circuit Adaptors Size 22F/22F , Clinical Thermometer, Oval , Clinical Thermometer,Oval , Clip Sensor , Closed Luer Iv Access System , Closed Port Device (Needle Less Connector):Needless Iv System With Closed Luer Access Having Self Sealing Silicone Split Septum With15cm Extension Set Bi& Tri (Not Reverse Septum) And Transparent Housing. Sizes: Plain, 15Cm Macro Bore Ext Set , Closed Port Device (Needle Less Connector):Needless Iv System With Closed Luer Access Having Self Sealing Silicone Split Septum With15cm Extension Set Bi& Tri (Not Reverse Septum) And Transparent Housing. Size: 15Cm Macro Bore Bi - Ext Set , Closed Port Device (Needle Less Connector):Needless Iv System With Closed Luer Access Having Self Sealing Silicone Split Septum With15cm Extension Set Bi& Tri (Not Reverse Septum) And Transparent Housing. Size: 15Cm Macro Bore Tri - Ext Set. , Closed Suction Systemo Closed Suction System Minimizes The Vap Incidences In Ventilated Patients. ; O Offers Convenience Of Attachment To Ventilator On One Side And Tracheal Tube On The Other, Resulting In Seamless Access Of Tracheo-Bronchial Cavity. ; O Dual Swivel Elbow Offers Convenience Of Rotatability For Optimal Comfort. ; O Atraumatic, Soft Catheter Minimizes The Damage To Mucosal Membranes. ; O Clear Depth Markings Help To Reduce Mucosal Trauma And Infection Potential By Allowing The Practitioner To Limit The Distance Of Catheter For Safe Suctioning. ; O Catheter Comes In A Protective Sleeve Which Completely Isolates It From Direct Contact To Caregivers And Avoids Disturbances. ; O Thumb Control Facility At The Proximal End Prevents Inadvertent Suctioning. ; O Provided With Separate Ports For Flushing And Mdi Administration. ; O Day-Of-The-Week Stickers Which Easily Identify Change Requirements. ; O Same Catheter Is Suitable To Be Used For Upto 72 Hours. ; O Sterile, Latex Free And Individually Packed. , Closed Wound Suction Unit O Close Wound Drainage Device Under Negative Pressure. ; O Provided With The Option To Use One Or Two Catheters Post-Operatively. ; O Connecting Tube Is Kink Resistant And Is Provided With Additional Strength To Withstand The Suction. ; O Multiperforated Catheters Provided With Radio Opaque Line And Satin Smooth ; Perforation/ Eyes For Trauma Free Performance. ; O Available In Different Sizes With Matching Size Curved Needle To Meet ; Moderate To Heavy Drainage Needs. ; O Graduated Bellow Allows User To Measure The Drainage Volume. ; O Flexible Bottle Chamber Is Easy To Be Depressed By One Person Single Handedly For Activating The Suction Of Bellow Unit. ; O Sterile, Individually Packed In A Box. Size: 10Fg/12Fg/14Fg/16Fg/18Fg , Combined Spinal Epidural Set , Compatible Part A With Bibag , Condom Catheter , Consumables For Aerogen Solo Ultrasonic Nebulisers , Consumables For Crrt And Bcm Machines,Make- Fresenius Medical , Consumables For Dvt Pumps And Enteral Feeding Pump - Make Cardinal Health , Consumables For Hotline Fluid Warmers , Continuous Neb Tube Set, Syringe & Cap Only (Pack Of 5) , Continuous Neb Tube Set, Syringe & Cap Only (Pack Of 50) , Continuous Neb Tube Set, Tubing Assembly Only (Pack Of 5) , Coplin Jar (Plastic) , Coplin Jar (Plastic) , Correguated Drainage Sheet Disposable , Coscos Speculum - Medium Size And Large Size , Craniotomy Drapematerial: 50 Gsm Sms Polypropylene Fabric Water Repellent . Sheet Size: 1.6 X 3.2M Adhesive Area 20Cm Dia.Side Channel & Collecting Funnel.Polysheet Lining 1.20 X 1.20M.Sterlized Pack. 5Years Expiry Life. Packing Material 45Gsm Polypropylene One Side And Another Side Tyvek Paper 25 Gsm. , Cresent Blade , Cryostat Blade-Low Profile, Made Of Stainless Steel With High Durability, Disposable Blades, 80 Mm Long X 8 Mm High X 0.25 Mm Thick Blades , Csf Flow Control Device , Cuff Controller , Cuff Pressure Gauge O It Should Be Designed To Monitor Air Pressure Of All Laryngeal Masks And Tracheal Tubeso It Should Have Integrated Inflation Bulb And Release Valveo The Diameter Of Dial Should Be At Least 68 Mm Or Moreo The Measurement Unit Should Be Graded In Cm H2oo The Measurement Zone Should Be With Colour Coding For Optimum Visibilityo It Should Have Standard Luer Connectiono The Equipment Should Be Latex-Freeo Standard Operating Temperature Should Be In Between +5 To + 40-Degree Celsiuso 100Cm Connecting Tube Should Be Provided With The Deviceo It Should Be European Ce Certified From Notified Body , Cuff Presure Gauzes , Custom Tubingpack , Cvp Line With Ecg Lead , Cvp Measuring Device O Suitable For Continuous Or Intermittent Monitoring Of Central Venous Pressure ; During Infusion, Particularly In Icu, Ccu, Ots And Casualty Departments. ; O Manometer Tube With Graduation From -4 Cm To +34 Cm And Attached To Three Way Tap. ; O Provided With 120 Cm Long Extension Tube, Fitted With Female Luer Lock On One End And Male Luer Lock On The Other End For Safe Connection To The Central Venous Catheter. ; O Latex Free Injection Site Is Provided For Extra Medication. ; O Sliding Indicator Provided To Record Previous Reading. ; O Moulded Clamps With Latex Free Rubber Strings For Easy Fixation On The Intravenous Stand. ; O Sterile, Individually Packed In Peelable Pouch. ; O Individually Packed In A Box. , Cvp Tranducer , Cvp Transducer With Pm Line And Iv Set: A. It Should Be Able To Give A Pressure & Waveform On Minimally Invasive Continuous Cardiac Out Put Monitor. B.It Should Be Able To Give A Pressure & Waveform On Any Multipara Monitor With Ibp Module. C.It Must Have 3±1 Ml/Hr Flow Rate Across Flush Device With Iv Bag Pressurized To 300 Mm Hg. D.It Must Have Moisture Resistance Connector Sheath Without Pin. E.It Should Have Gold/Copper/Aluminium- Plated Connector Wires. F.It Must Have An Operating Pressure Range Of -50 To 300Mmhg, With Overpressure Tolerance Range Of -500 To +5000Mm Hg. G. It Must Have A Provision To Put Arm Strap. H.It Should Have An Integrated Flush Device Which Can Be Operated From Any Direction For Easy Accessibility. I.It Should Have A Test Port That Can Be Used To Check The Performance Of The Transducer When Used Along With A Simulator Device For The Purpose. , Cytobrush , Dark Glasses , Disp. Wrap Spu Vest Medium , Disp. Wrap Spu Vest Small , Disposable Biopsy Gun Having Two Sample Notch 17Mm And 19Mm In The Same Device. ; Devicealso Has Two Depth Penetration Option 18Mm And 25Mm In A Same Device And Comes With Delay Firing Mode Option(Semiautomatic And Automatic Option) ; Sizes Are-14G,10Cm ,14G,16Cm ,16G,10Cm ,16G,16Cm 18G,10Cm ,18G,16Cm ,18G,25Cm ; Should Be Us Fda And Ce Approved. , Disposable Bougie (For Et Tubeintubating) , Disposable Bougie Vented (For Et Tubeintubating) , Disposable Bronchoscope O There Should Be No Optical Image Fibre Bundles In The Scope ; O It Should Have The Capability Of Easy Navigation And Fast Identification Of Anatomical Landmarks ; O The Scope Should Be Packaged Sterile To Eliminate The Risk Of Cross Contamination ; O It Should Be Integrated With One Cmos Camera And Two Led Light Source On Distal End ; O Minimum Length Of The Scope Should Be At Least 600Mm ; O The Working Channel Should Allow Fluid Instillation And Oxygen Flushing In Therapeutic Scope. ; O An Introducer Should Be Provided To Facilitate Introduction Of Endoscopic Accessories With Therapeutic Scope. ; O The Control Lever On Handle For The Movement Of Distal Tip Up & Down In A Single Plane ; O Should Have Intermittent Suction Controller To Control Suction Of Pressing. ; O It Should Be Us-Fda And European Ce Approved.Inner Diameter 1.2 Mm/ 2.2 Mm/ 2.8 Mm ; Outer Diameter 3.8 Mm/ 5.0 Mm/ 5.8 Mm ; Working Length 600 Mm; Bending Range 180Deg Up, 180Deg Down; Field Of View 85Deg ; Depth Of Field 6 - 50 Mm , Disposable Curved Circular Stapler 29 Mm-Row-3 , Disposable Curved Circular Stapler 32Mm-Row-3 , Disposable Cystoscope O There Should Be No Optical Image Fibre Bundles In The Scope ; O It Should Have The Capability Of Easy Navigation And Fast Identification Of Anatomical Landmarks ; O The Scope Should Be Packaged Sterile To Eliminate The Risk Of Cross Contamination ; O It Should Be Integrated With One Cmos Camera And Two Led Light Source On Distal End ; O Minimum Length Of The Scope Should Be At Least 390Mm ; O The Working Channel Should Allow Fluid Instillation. ; O An Introducer Should Be Provided To Facilitate Introduction Of Endoscopic Accessories With Therapeutic Scope. ; O The Control Lever On Handle For The Movement Of Distal Tip Up & Down In A Single Plane ; O It Should Be Us-Fda And European Ce Approved. ; Features Adult Scope ; Inner Diameter 6.6Fr ; Outer Diameter 16.2Fr ; Working Length 390 Mm ; Bending Range 210O Up, 120O Down ; Field Of View 120O ; Depth Of Field 3 -100 Mm , Disposable Endocapsular Rings , Disposable Iris Hook , Disposable Linear Cutter Reload 60-3.8 Blue,Cut Line 60Mm,Staple Line 64Mm , Disposable Linear Cutter Reload 60-4.8 Green,Cut Line 60Mm,Staple Line 64Mm , Disposable Linear Cutter Reload 80-3.8 Blue,Cut Line 80Mm,Staple Line 84Mm , Disposable Linear Cutter Reload 80-4.8 Green,Cut Line 80Mm,Staple Line 84Mm , Disposable Neonatal Spo2 Adhesive Sensor (20/Box) , Disposable Pace Maker Pad For External Pacing For Zoll Defillator , Disposable Perforator 11Mm/8Mm , Disposable Perforator 9Mm/6Mm , Disposable Perforator- Size 14Mm/11Mm , Disposable Rhinolaryngo Scopeo There Should Be No Optical Image Fibre Bundles In The Scope ; O It Should Have The Capability Of Easy Navigation And Fast Identification Of Anatomical Landmarks ; O The Scope Should Be Packaged Sterile To Eliminate The Risk Of Cross Contamination ; O It Should Be Integrated With One Cmos Camera And Two Led Light Source On Distal End ; O Minimum Length Of The Scope Should Be At Least 300Mm ; O The Working Channel Should Allow Fluid Instillation And Oxygen Flushing In Therapeutic Scope. ; O An Introducer Should Be Provided To Facilitate Introduction Of Endoscopic Accessories With Therapeutic Scope. ; O The Control Lever On Handle For The Movement Of Distal Tip Up & Down In A Single Plane ; O Should Have Intermittent Suction Controller To Control Suction Of Pressing With Therapeutic Scope ; O It Should Be Us-Fda And European Ce Approved. Inner Diameter 2.2 Mm ; Outer Diameter 5.0 Mm ; Working Length 350 Mm ; Bending Range 130O Up, 130O Down ; Field Of View 85O ; Depth Of Field 6 - 50 Mm ; Direction Of View Oo (Forward View) ; Illumination Method Led , Disposable Scalpel-Different Size , Disposable Shear 36Mm For Ultrasonic Generator , Disposable Shoe Cover- 45 Micron Thick Wate Proof,Length Cover Upto Knee, Note:- Product Should Be In Sterilized Pack.Packet Material 35 Gsm Polypropylene One Side And Another Side Tyvek Paper 35 Gsm Packing. , Disposable Skin Grafting Blades , Disposable Vaginal Speculum O Disposable Vaginal Speculum. ; O Speculum Is Used To Widen The Opening Of Vagina For Providing Clear Visibility Of The Cervix. ; O Made Of Clear, High Strength, Non-Toxic Polymer. ; O Designed To Eliminate The Time And Expense Of Reprocessing Metal Specula. ; O Single Use Speculum Also Minimizes The Risk Of Cross-Contamination ; Associated With Improper Cleaning And Sterilization. ; O Smooth And Ergonomically Designed For Comfort. ; O Built-In Led Illumination Light Source For Proper Examination. ; O Locking Facility Enables Necessary Vaginal Widening Adjustments. ; O Facilitates Self-Holding In A Variety Of Positions. ; O Allows Single-Handed Operation. ; O Sterile And Individually Packed. , Disposables And Modules For Cardiac Monitor, Make- Edwards , Disposables For Portable Deployable Isolation System With Negative Flow Make- Bed Air , Double Lumen Femoral Catheter Curved , Double Lumen Femoral Catheter St. , Double Lumen Laryngeal Mask Airwayo Specialised Mask To Enable An Effective Oro-Pharyngeal Seal Accompanied By The Oeso-Phageal Seal At The Oeso-Phageal Sphincter. ; O 100% Silicone Mask Enables Smooth Intubation And Extubation And Also Offers Enhanced User Safety. ; O Uniquely Designed Device With Special Port To Provide Tracheal Ventilation Along With Gastric Access. ; O Shaped As Per Anatomical Structure To Facilitate Successful Intubation. ; O Primary Seal Enables Independent Ventilation And The Secondary Seal Offers Improved Safety And Encourages Drainage Of Digestive Tract Contents Independent Of Ventilation. ; O Diminishes The Chances Of Aspiration. ; O Ventilation Tube Clearly Marked With All Information Like Mask Size, Patients Weight And Cuff Inflation Volume. ; O Single Use, Sterile Device. , Double Lumen Tube O Robertshaw Tube Designed To Fit Patients Anatomy For Thoracic Or Pulmonary Surgery And Single Lung Long-Term Ventilation. ; O Anatomically-Correct Curvatures Facilitate Proper Placement And Intubation. ; O High Volume/ Low Pressure Tracheal Cuff Has A True Barrel Shape That Minimizes Pressure On The Tracheal Tissue And A Uniquely Shaped Bronchial Cuff Helps Prevent Accidental Upper Lobe Occlusion. ; O Tracheal Cuff Separates The Lung From The Environment. ; O Bronchial Cuff Separates The Lungs From Each Other. ; O Colour-Coded Pilot Balloons With Luer-Lock Connector, Marked With The Name Of The Lumen (Tracheal Or Bronchial) For Easy Identification. ; O D Shaped Lumina Provide Maximum Cross Sectional Area, Minimising Resistance To Gas Flows. ; O Provided With Double Swivel Connections With Double Caps. ; O Sterile, Individually Packed. , Dry View Flims For Mri Size 14 17 , Durepore , Dviu Knife , Ear Rubber Bulb , Ecg Electrodeneonatal With Wire O It Should Be Design With Silver/Silver Chloridesensor And Highly Conductive Solid Gel Ensures Clear Recordings For A Precise Diagnosis. ; O It Should Have Hydrophobic Adhesive. ; O Lead Wires Should Be Radiolucent, So There Is No Need To Either Remove The Electrodes Or Touch The Neonate ; O During X-Ray Procedures. ; O It Should Be Ce/Iso,Us Fda Certified , Ecg Electrode Blue Sensor Neonatal O It Should Be Design With Offset Connector And Wet Gel Ensures Clear Recordings For A Precise Diagnosis. ; O It Should Be Oval Shape Design With Silver/Silver Chloride Sensor. ; O It Should Be Ce/Iso,Us Fda Certified , Ecg Paper At-102 G2 , Ecg Paper For 12 Channel E.C.G Machine, Model:Cardiomin 12B , Echo Jelly , Edward Oxymeter Central Venous Catheter , Endotracheal Tube Cuffed Thermo-Sensitive Tube Conforms To The Tract Anatomy. ; O Conforms To F-29 Standards. ; O Kink Resistant Tube Ensures Patient Safety. ; O Strong Tube Walls To Ensure Proper Ventilation. ; O Murphy Eye Has A Polished Smoothness Ensuring Atraumatic Intubation And Extubation. ; O Features A High-Volume, Low Pressure Cuff. ; O Soft Cuff Allows Air Tight Fit Between The Tube And Trachea. ; O Wide Black Ring Above Cuff Gives Visual Indication Of Tube Passing The Vocal Cords To Aid In Placement. ; O Radio-Opaque Line Determines Exact Location. ; O Standard 15Mm Connector. ; O Sterile Individually Packed In Peelable Blister Pack. , Endotracheal Tube Plaino Manufactured From Thermo-Sensitive Material Readily Conforming To Body Contours At Body Temperature. ; O Kink Resistant And Transparent Material To Reduce Any Possibility Of Occlusion In The Tube Bore. ; O Nasoral Tip Suitable For Nasal/ Oral Intubation. ; O Murphy Eye With Smooth Edges And Tip To Reduce Any Trauma To The Patient During Procedure. ; O Provided With Radio-Opaque Line Throughout The Length For X-Ray Detection And Assistance In Placement. ; O Proximal End Is Fitted With Standard 15 Mm Connector Which Can Snugly Fit With Other Commonly Used Connectors. ; O Sterile Individually Packed In Peelable Blister Pack. , Endotracheal Tube With Subglotic Suction - Different Size , Ent Adult - Airway Balloon Catheter-10Mm*40Mm/12Mm*40Mm/14Mm*40Mm/16Mm*40Mm , Ent Pediatric - Airway Balloon Catheter-5Mm*24Mm/7Mm*24Mm/9Mm*24Mm , Ent-Balloon Inflation Device , Epidural Kit , Epidural Anesthesia Kito Epidural/Tuohy Needle : Tuohy Type Needle Is Provided With Clear Depth Marking For Accurate Insertion And Depth Reading With Polished Inner Bevel Edge To Minimize The Risk Of Catheter Shearing. ; O Epidural Catheter : Closed Round Soft Tip With Three Lateral Eyes. ; O Lor Syringe : Specially Designed Syringe Suitable For Air And Saline Technique, Provides Clear Identification Of Epidural Space. ; O Threading Assist Guide : Fits Securely Into The ; Needle & Assists In Easy Advancement Of Catheter. ; O Detachable Connector : Separate Twist Lock ; Connector. ; O Hydrophillic Filter : Hydrophillic 0.2 Micron Filter Provides Additional Safety & Control Against Microbial Infections. ; O Sterile, Individually Packed In A Box. , Epidural Catheter O Soft Tip Epidural Catheter Is Specially Designed For Continuous Anaesthesia And Pain Relief Therapy. ; O Catheter Is Made From Unique Plasticizer Free Polymer With Excellent Bio-Compatibility. ; O Flexible And Atraumatic Soft Tip With Three Lateral Eyes. ; O Catheter Is Printed To Determine The Depth Of Insertion And Accurate Placement In The Epidural Space. ; O Luer Lock Twist Connector. ; O Crystal Clear Catheter With Radio Opaque Line. ; O Sterile, Individually Packed In Peelable Pack. , Epidural Catheter Size 22G , Epidural Needle 20G , Esmarch Bandage 3 , Esmarch Bandage 4 , Esmarch Bandage 5 , Et Tube Extension ( For Ventilator) , Ett Intubating Stylet (Small, Medium, Large) , Eusachian Balloon Catheter- It Should Have A Non Complaint Balloon With Puncture Resistance. It Should Have A Working Length Of 256Mm. It Should Have A Flexible Shaft. .It Should Have Marker Bands For Endoscopic & Direct Visualization. It Should Have Separate Port For Inflation / Deflation And A Separate Port For Introduction Of The Guide Wire. Balloon Should Reach Its Stated Size At 6Mm * 17Mm Atmosphere And Should Withstand 10 Atmospheric Pressure. , Eustachian Balloon Catheter- It Should Have A Non Complaint Balloon With Puncture Resistance. It Should Have A Working Length Of 256Mm. It Should Have A Flexible Shaft. .It Should Have Marker Bands For Endoscopic & Direct Visualization. It Should Have Separate Port For Inflation / Deflation And A Separate Port For Introduction Of The Guide Wire. Balloon Should Reach Its Stated Size At 6Mm * 14Mm Atmosphere And Should Withstand 10 Atmospheric Pressure. , Eustachian Balloon Inflation Device -It Should Have A Ergonomic Piston Handle For Safe And Controlled Inflation/Deflation Of The Balloon Catheter. It Should Have Clear Grading Of Different Pressure Levels. It Should Have High Pressure Connector Tubing To Connect To The Balloon Catheter. It Should Be Compatible With Different Sinus Balloon Catheters. It Should Have Clear High Pressure Cylinder Barrel To Indicate The Level Of Saline/ Fluid Inside The Inflation Device. It Should Have A Piston Locking System To Prevent Accidentalinflation/Deflation Of The Balloon Catheter , Eustachian Guide Catheter- It Should Have A Non-Malleable Stainless Stell Shaft. It Should Have Clear Distal Portion For Endoscopic Visualizationof Tuboplasty Instrumentation And A Coloured Atraumatic Tio For Endoscopic Visualization.It Should Consist Of A Scetion Barb And Hub For Clearing Thin Secretions. It Should Be Compatible With Guide Handle To Enable Single Handed Operation Of The Scope And Tuboplasty Kit.It Should Becompact In Size To Acess The Eustachian Tube Cannel.Guide Catheter Should Be Approved By Credible Authorities For Futher Safety Of Patients. Authority Like Cdsco Of India. , Eustachian Guide Handle- It Should Be Compatible With Guide Catheter. It Should Be Malleable To Suit Different Users. It Should Have A Hand Tight Grip Surface For Better Control And Stability.It Should Have A Lumen To Introduce Ballooninstrumentation , Express Cable (Connecting Cable Between Icp Monitor & Microsensor Icp Transsducer) , External Lumber(Csf) Drainage System With Double Chamber Bag. , External Ventribular Drainage System With Double Chamber Bag , Eye Drapematerial : 25Gsm Sms Polypropylene Febric Water Repellent Blue Colour. Sheet Size. 90X70cm Incise Area. 7X9cmeye Lid Holder. 6 Pcs. Drainage Pouch Of Transparent Film 1Nos. Eto Sterlized Packing Material: 45 G Polypropylene Film One Side And Another Side 25Gsm Tyvek Paper With 5 Years Expiry Life. , Facial Oxygen Tent Mask Adult/Ped , Fast Absorbing Polyglactin 910 Undyed 140 Cm,1/2 Circle Round Body 1/2 Circle Reverse Cutting Double Needle,Needle-36 Mm,Size-2-0,Box Of-12 Foils , Fast Absorbing Polyglactin 910 Undyed Braided 45 Cm,3/8 Circle Cutting,Needle-16 Mm,Size-3-0,Box Of-12 Foils , Fast Absorbing Polyglactin 910 Undyed Braided 70 Cm,1/2 Circle Round Body,Needle-26 Mm,Size-3-0,Box Of-12 Foils , Fast Absorbing Polyglactin 910 Undyed Braided 70 Cm,3/8 Curved Reverse Cutting,Needle-26 Mm,Size-3-0,Box Of-12 Foils , Fast Absorbing Polyglactin 910 Undyed Braided 75 Cm,3/8 Circle Cutting Pc 3 Ethiprime,Needle-16 Mm,Size-3-0,Box Of-12 Foil , Fast Absorbing Polyglactin 910 Undyed Braided 75 Cm,3/8 Circle Reverse Cutting Prime Ps,Needle-26 Mm,Size-3-0,Box Of-12 Foil , Fast Absorbing Polyglactin 910 Undyed Braided 90 Cm,1/2 Circle Tapercut V-34,Needle-36 Mm,Size-2-0,Box Of-12 Foil , Fast Absorbing Polyglactin 910 Undyed Braided 90 Cm,1/2 Circle Tapercut,Needle-35 Mm,Size-2-0,Box Of-12 Foils , Feeding Bago Feeding Bag Is An Enteral Feeding Bag Intended For Gastro-Intestinal Feeding. ; O Specially Designed 1.2 Litre Capacity Bag Made Up Of Dehp Free Pvc. ; O An Ice Pouch Is Provided On The Rear Side Of The Bag For Preserving The Food For Longer Intervals Of Time. ; O A Dehp Free Transfer Set Is Directly Connected To The Bag. ; O Roller Controller Provided On The Transfer Set Facilitates Control On The Administered Feed. ; O The Feeding Bag Is Graduated To Determine Precisely The Quantity Of The ; Administered Feed. ; O Feeding Bag Is Provided With A Closure Cap And Also A Hanger For Safe Hanging During And After Use. ; O Sterile, Individually Packed In Peelable Pouch. , Femoral Catheter 16G , Fenestrated Tracheostomy Tube Diff Size , Filliform Urethral Dialators , Filter Cartridge 20 20?M Big Blue Cat No. 6349711 , Filter Pod , Filters Pod For Bed Air , Filtrate Bag 10L , Fistula Imported , Fistula Needle , Five Layered Highly Absorbent Foam Dressingwith Self Adherent Borders Soft-Silicone Safetec Wound Contact Layer For Painles Dressing And Wound Pad Comes With Flex Cut Techonology For 360 Degree Flexibility Of Dressing . Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 7.5X7.5 Cm , Five Layered Highly Absorbent Foam Dressingwith Self Adherent Borders Soft-Silicone Safetec Wound Contact Layer For Painles Dressing And Wound Pad Comes With Flex Cut Techonology For 360 Degree Flexibility Of Dressing . Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 12.5X12.5 Cm , Five Layered Highly Absorbent Foam Dressingwith Self Adherent Borders Soft-Silicone Safetec Wound Contact Layer For Painles Dressing And Wound Pad Comes With Flex Cut Techonology For 360 Degree Flexibility Of Dressing . Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 15X15 Cm , Five Layered Highly Absorbent Foam Dressingwith Self Adherent Borders Soft-Silicone Safetec Wound Contact Layer For Painles Dressing And Wound Pad Comes With Flex Cut Techonology For 360 Degree Flexibility Of Dressing . Product Should Be Usfda/Ce Certified. Usage- Upto 7 Days. Size- 17.5X17.5 Cm , Five Layered Highly Absorbent Foam Dressingwith Self Adherent Borders Soft-Silicone Safetec Wound Contact Layer For Painles Dressing And Wound Pad Comes With Flex Cut Techonology For 360 Degree Flexibility Of Dressing . Product Should Be Usfda/Ce Certified.Usage- Upto 7 Days. Size- 15X20 Cm , Five Layered Self- Adhesive Absorbent Heel Dressing Designed For Exuding Wounds, With Soft Silicone Adhesivesafetecwound Contact Layer, With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Acquisition Layer Made Up Of Polyurethane Foam & Spreading Layer Made Up Of Non-Woven Viscose Polyester, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 22X23 Cm , Five Layered Self- Adhesive Absorbent Sacral Dressing Designed For Exuding Wounds, With Soft Silicone Adhesive Safetec Wound Contact Layer, With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Acquisition Layer Made Up Of Polyurethane Foam & Spreading Layer Made Up Of Non-Woven Viscose Polyester, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 22X25 Cm , Five Layered Self- Adhesive Absorbent Sacral Dressing Designed For Exuding Wounds, With Soft Silicone Safetacwound Contact Layer, With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Acquisition Layer Made Up Of Polyurethane Foam & Spreading Layer Made Up Of Non-Woven Viscose Polyester, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 16X20 Cm , Flexometalic Armoured Tracheal Tube With Cuff Size -5 , Flexometalic Armoured Tracheal Tube With Cuff Size -5.5 , Flexometalic Tubesize -5Mm To 9Mm , Flexometalic Armoured Tracheal Tube With Cuff Size -6.5 , Flexometalic Armoured Tracheal Tube With Cuff Size -7 , Flexometalic Armoured Tracheal Tube With Cuff Size -7.5 , Flexometalic Armoured Tracheal Tube With Cuff Size -8 , Flexometalic Armoured Tracheal Tube With Cuff Size -8.5 , Flexo-Metallic Endotracheal Tubeo Flexo-Metallic Endotracheal Tube For Airway Management Intended For Use In Surgeries Demanding Flexible Head Or Neck Position. ; O Specially Designed Suitable To Laryngeo-Tracheal Anatomy. ; O Tubes Are Fitted With A Reinforced Stainless Steel Spiral Core To Overcome Any Possibility Of The Bore Occlusion Due To Kinking Or Collapse Of The Tube. ; O Flexo-Metallic Feature Provides 100% Kink Resistance And Anti-Crushing Strength To The Endotracheal Tube. ; O Completely Flexible Tube With A Thin, Strong Wall. ; O High Volume, Low Pressure Cuff Provides Effective Seal Between Tube And Trachea And Minimizes The Risk Of Folds. ; O Radio Opaque Line With Precise Graduation Marking Guarantees Proper Placement Of The Tube. ; O Murphy Eye Ensures Clear Airway And No Mucus Blockage. ; O Conforms To F-29 Standards. ; O Sterile, Individually Packed. , Flexometallic Supraglottic Airway O The Airway Tube Should Be Wire-Reinforced To Eliminate The Risk Of Occlusiono It Should Be Specially Designed For Ent, Ophthalmic, Dental And Other Head And Neck Surgerieso The Pilot Balloontube Should Be Integrated With Airway Tube, Eliminating Risk Of Accidental Cutting During Surgerieso It Should Have Reinforced Tip At Cuff To Avoid Kinking During Insertiono Cuff And Airway Tube Should Be Moulded As A Single Unit For Safety - No Separationo It Should Have Depth Marks For Monitoring Correct Positioning Of The Masko It Should Provide Maximum Intra-Cuff Pressure Of Up To 60 Cmh20o It Should Have 15 Mm Male (Iso) Airway Connectoro It Should Be Disposable, Eliminating Chances Of Cross Contaminationo It Should Be Made Of 100% Phthalate-Free And Latex-Free Medical Graded Materialo Should Be Available In All Standard Sizes To Accommodate Paediatric & Adult Patientso Should Be Us Fda, Ce & Iso Certified For Quality Assurance , Flotrac Cardiac Output Sensor For Hemo Sphere Monitor , Flow Trac , Flow Trach Catheter For Measuring Cardiac Output , Flower Tip Suction Cathetero Endo-Bronchial Suction Catheter With Patented Non-Traumatic Flower Tip. ; O Manufactured From Non-Toxic And Non-Irritant Medical Grade Pvc. ; O Provided With Unique Integrated Ring Type, Open End Flower-Shaped Tip To ; Minimize Any Mucosal Damage During The Suction Procedure. ; O Specially Designed Oro-Bronchial Catheter Is Automatically Centered During Suctioning Due To Its Integral Ring Type Design. ; O Smooth Tip Prevents Irritation To Tracheal Mucosa And Adds To Patient Comfort. ; O Provided With Two Round Lateral Eyes At The Distal End Which Enables Uniform Pressure Distribution And Facilitate Efficient And Uninterrupted Suctioningeven If The Main Tip Gets Occluded. ; O Sterile, Individually Packed In A Peel Open Soft Blister Pack. ; O Size: 6,8,10,12,14,16 Fg , Fnac Franzen Handle , Foldable Lens No.19 , Foldable Lens No.20 , Foldable Lens No.21 , Foldable Lens No.22 , Foldable Lens No.23 , Foldable Lens No.24 , Foldable Lens No.25 , Foldable Lens No.26 , Foldable Lens Of Differente Power +17D To +26D , Foleys Cathetero Foley Catheter Used For Short Or Long Term Urine Drainage. ; O Made Up Of Latex Bonded With Silicone Elastomer Which Eliminates The Risk Of Encrustation. ; O Smooth Surface Facilitates Non-Traumatic Intubation. ; O Distal End Is Coned And Provided With Super Smooth, Burr Free Eyes For Atraumatic Intubation. ; O Provided With Symmetrical Large Capacity Balloon That Ensures Straight Tip For ; Proper Urine Flow And Good Sphincter Action, Preventing Bladder Leakage. ; O Hard Non-Return Valve Ensures Trouble Free Inflation And Deflation Of Balloon. ; O Valve Is Colour Coded For Instant Size Identification. ; O Sterile, Ready For Use. Size: 12Fg To 24Fg , Fougarte Catheter , Full Gown Material : 60 Gsm Nw Sms Spun Lace Wrap Around Full Gown. Length 120Cm. 2Nos Hand Towel. Sterlized With 5Years Expiry Life. 45 Gsm Polypropylene Material One Side And Another Side 25 Gsm Tyvek Paper. , H.F Filter , Half Gown Material : 25 Micron Thick Pe Hygiene Film . Size :110Cm Length Half Gown Waterproofeto Sterlized Packing Material: 45 G Polypropylene Film One Side And Another Side 25Gsm Tyvek Paper With 5 Years Expiry Life. , Handpiece Set With Coaxial High Flow Tip And Suction Tube , Hard Cervical Collar , Hemorrhoids Stapler-34Mm-Row-3 , Hewoeon Ceutralize , Hf Female Spike Adapter , High Concentration Oxygen Mask O Specially Designed For High Concentration Oxygen Therapy. ; O Soft, Transparent And Odor Free Vinyl Mask For Greater Patient Comfort. ; O The Smooth, Feathered Edges Are Designed For Patient Comfort While Reducing Irritation Points. ; O The Mask Fits Snugly Over The Patients Mouth And Nose. ; O Adjustable Elastic Strap Fits Over The Patients Head Holding The Mask In Place. ; O The Mask Also Has A Reservoir Bag That Is Inflated With Pure Oxygen. ; O The Reservoir Bag Allows For Adequate Oxygen To Be Available To Meet The Unpredicted Patients Breathing Pattern And Tidal Volume. ; O Non-Return Valves Provided At Inhale And Exhale Points Prevent Carbon-Dioxide Retention. ; O Light Weight Reservoir Improves The Oxygen Efficiency. ; O Non-Sterile, Individually Packed. ; Unit Consists Of : ; O Mask With Elastic Strap ; O Mask Connector With Non-Return Valve ; O 600 Ml Reservoir Bag ; O 200 Cm Long Multichannel Tube , High Flow Circuit-F&P(Air Vo2)900Pt561, Heated Humdifire Chamber Kit , High Pressure Monitoring Line O Dehp Free Polyethylene High Pressure Monitoring Extension Line. ; O Non-Reactive And Highly Compatible To All The Commonly Infused Fluids. ; O Small Bore High Pressure Extension Line Suitable For High Pressure Applications, For Example As Connection Between Syringe, Infusion Pump And The Patient. ; O Provided With Male And Female Luer Lock At Either Ends, ; Which Facilitates Secure Fitting To All Standard Equipment. ; O Luer Lock Connectors Provide Secure Fitting. ; O Can Sustain A Pressure Upto 40 Kg/ Cm² Or 560 Psi. ; O Sterile, Individually Packed In Blister Pack. , Highly Compressed Silicone Dressings For Scars, With Shower Proof Backing Film Made Up Of Polyurethane Film, With Textile Core Made Up Of Non-Woven Polyester, With Ultra Violet Protection Factor 5. A Protective Release Liner Made Up Of Polypropylene Film. Self Adherent Soft Silicone Adhesive Technology. Size- 5X7.5 Cm Ce And Usfda Certified , Highly Compressed Silicone Dressings For Scars, With Shower Proof Backing Film Made Up Of Polyurethane Film, With Textile Core Made Up Of Non-Woven Polyester, With Ultra Violet Protection Factor 5. A Protective Release Liner Made Up Of Polypropylene Film. Self Adherent Soft Silicone Adhesive Technology. Size- 10X18 Cm Ce And Usfda Certified , Highly Compressed Silicone Dressings For Scars, With Shower Proof Backing Film Made Up Of Polyurethane Film, With Textile Core Made Up Of Non-Woven Polyester, With Ultra Violet Protection Factor 5. A Protective Release Liner Made Up Of Polypropylene Film. Self Adherent Soft Silicone Adhesive Technology. Size- 4X30 Cm Ce And Usfda Certified , Hiv Protection Kit1. Wrap Around Full Gown 55Gsm Sms Material, Water Repellent, 120Cm Length. 1Nos. 2. 25 Micron Polyproplene Plain Sheet 1.2 X 2.1M Length. 2Nos. 3. 1Nos 1Pair Water Proof Leggings. 4.1Nos Non Woven Cap.5.1Nos 3Ply Surgical Mask.6. 1 Nos Disposable Bag. Sterlized Pack.Packing Material 45Gsm Polypropylene One Side And Another Side Tyvek 25Gsm Paper Packing. 5Years Expiry Life. , Hme Fillterh.M.Es Are Passive Humidification Systems That Retain Heat And Moisture ; From The Patients Exhaled Gas. ; O Provides Effective Protection Against Various Types Of Particles Including ; Bacteria, Viruses, And Moisture Droplets. ; O Precisely Engineered And Easy To Use Device Made Up Of High Strength Plastic Material Offering Reliable Performance. ; O Provided With High Efficiency Electrostatic Filters To Address Concerns Associated With Ventilated Patients. ; O The Filters Help Protect The Patient, The Equipment, And The Breathing Circuit From Contamination. ; O Enhances Particle Capture Efficiency And Give A Low And Stable Breathing Resistance Even When Wet. ; O A Conveniently Located Port Or Connection Permits Gas Sampling At The Top Of The Housing, ; O H.M.E.Fs Are Designed According To Iso Standards To Help Facilitate Connection To Different Ventilators And Anesthesia Systems. ; O Sterile, Single Use Device, Individually Packed. , Hme Filter With Encloser , Hme Membrane , Hme Membrane , Hormonal Intra-Uterine System With Applier , Hotline Warming Set-Disp 30/Ca, L 70 , Hub Cuttersafety Portable Box For Disposal Of Hypodermic Needles.; O For Single, One -Time Use To Prevent Risk Of Needle Stick Injuries To Hcw Handling Sharps ; O No Electricity Required; O Ability To Cut The Needle From The Hub Of Syringe ; O Container With Yellow Casing And Cap Of Volume 0.3Lts Where, Exterior Can Be Cleaned With 70% Alcohol.; O Puncture Resistant Hard And Can Be Locked , Hub Cutter With 100 Hypodermic Needle Collection Capacity, Made Of Polypropylene (Pvc Free Plastic), Autoclavable For Final Disposal, Slide Door For Temporary Closure While Usage , Portable To Dispose Needle At Bedside, No Heavy Metals Used For Construction, Translucent Container For Visualization Of Fill Level , Label With Biohazard Symbol, Meeting All Requirements Of Bio Medical Waste Management Rule- Sharp Disposal, Non-Burn Technology Device , Hydrocolloid Dressing, Size- 10.5 X 12 , Hydrocolloid Dressing, Size- 10.5 X 17 , Hydrogen Peroxide Gas Cassette , Hydrophilic Acrylic Foldable Lens Optic Diameter -6.00Mm,; Overall Length-12.50Mm ; A Constant -118.00 , Hydrophilic Acrylic Foldable Lens Optic Diameter -6.00Mm,; Overall Length-12.50Mm ; A Constant -118.00 ; Fully Aspheric Optics With 360 Degree Square Edge , Hydrophobic Acrylic Foldable Lens Dimeter 6.00Mm,Overall Length-13.00Mm, A Constant -118.80 , Hydrophobic Acrylic Foldable Lens Dimeter 6.00Mm,Overall Length-13.00Mm, A Constant -118.80 , Hydrophobic Foldable Acrylic Lens Semi Preloaded ,Natural Yellowchromophore,360 Deg Square Edge- Fully Aspheric Opticsdiameter -6.00Mm, Overall Length-13.00Mm ;A Constant -118.8 , Hydrophobic Foldable Acrylic Lens With Preloaded Injecting Systemdiameter -6.00Mm, Overall Length-13.00Mma Constant -118.8Fully Aspheric Optics With , Hydrophobic Foldable Single Piece Intraocular Lens , Hydroxypropyl Methyl Cellulose Opthalmic Solution Usp 2.0%Appavisc3ml , Hydroxypropyl Methyl Cellulose Opthalmic Solution Usp 2.0%Appavisc5ml , I V Cannula Vialon Made Venous Access Device For Prevention Of Needle Stick Injuries And Safety From Unanticipated Blood Exposure (Or Splatter), The Needle Tip Should Be Totally Encapsulated In A Plastic Shield. Sizes : 14G, 16G, 18G, 20G & 22G. , I V Cannula-Adultported Intravenous Cannula Having Back Cut Needle Bevel & Ptfe Catheter With Tapered End With Noise Needle And Intra Flush Technology ; Sizes : 14G, 16G, 18G, 20G & 22G. , I V Cannula-Pediatric Non-Ported Virgin Ptfe Cannula With Flexible Wings, Made Of Polypropylene, Vailon, Stainless Still304, Polydimethylsilosne, Hdpf,Ldpe. ; Sizes: 24G, 26G , I V Set O Safety Infusion Set, Dehp Free. ; O Vented Spike Fits Tightly, Ensuring Easy Insertion And Removal. ; O Comes With Unique Air Stop Feature Which Is A Hydrophilic Filter Membrane Present At The Bottom Of The Drip Chamber Which Prevents The Ingress Of Air In Case Of Emptied Fluid Container. ; O Provided With An Innovative Prime Stop, Which Is A Hydrophobic Membrane ; Placed On The Luer Lock Fitting That Stops Fluid Leaking And Dripping On The Floor. ; O Longer Drip Chamber Fits Firmly In The Users Hands, Ensuring A Better Grip. ; O Specially Designed Y Type Injection Port Made Up Of Silicone Having Re-Sealing Property Is Provided For Additional Medication. ; O Soft, See-Through, Clear 180 Cm Long Dehp Free Pvc Tubing, Which Is Kink Resistant For Uninterrupted And Smooth Flow. ; O Advance, Handy Roller Clamp For Efficient Control. ; O Sterile And Individually Blister Packed. , I.B.P Electrodes (Disposable) , I.V. Cannula With Three Way Stop Cock , I.V. Extension Line 150 Cc , I.V. Fexater Transparent , Icd Chest Tube Set With Trocar Size-16,18,20,22,24 , I-Gel Laryngeal Mask All Size1 To 6 , Implant Blade , Incentive Spirometer , Infant Feedingtube O Infant Feeding Tube With Graduation. ; O Made From Dehp Free, Non-Toxic Pvc Material Completely Non-Irritant To Delicate Mucosa. ; O The Tube Features Low Friction, Super Smooth Frozen Surface Ensuring ; Non-Traumatic Intubation. ; O The Tube Is Marked At Every Cm Starting From Tip At 5Cm To 40Cm To Enable Accurate Placement. ; O Distal End Of The Tube Is Coned For Smooth Intubation And Equipped With Two ; Lateral Eyes For Efficient Drainage And Administration. ; O Proximal End Is Provided With Female Luer Mount For Easy Connection To Feeding Funnel Or Syringe. ; O Radio-Opaque Line Facilitates Accurate Tube Placement. ; O Color Coded For Immediate Size Identification. ; O Sterile, Straight Packed In Peelable Soft Blister Pack. ; Size: 5Fg To 10Fg , Infusion Pipe Pump , Insuline Syringedisposable Single Use Insulin Syringe With Integrated Needle Made Of Polypropylene Plastic With Tbl Technology . Should Have No Dead Space Design & Tribevel Needle Tip. ; Strength: U40 & U100 With 31G Needle. , Integrated Closed Iv Catheter System With Pre-Attached High Pressure Extension Set (Upto 300 Psi) With Two Split Septum Needle Less Connector, Needle Tip Fully Encapsulated In Plastic Cap For Nsi Prevention, Size- 18G/20G/22G/24G , Integrated Closed Iv Catheter System:Integrated Closed Iv Catheter System With Pre-Attached High-Pressure Extension Set (Up To 300 Psi) With Two Split Septum Needle Less Connector, Needle Tip Fully Encapsulated In Plastic Cap For Nsi Prevention. Available Sizes: 18G, 20G, 22G, 24G.Pack Sizes: 20 Pcs Box. , Intercostal Drainage Tube , Intra Cardiac Sump , Intubating Supraglottic Airway O It Should Be Anatomically Curvedfor Fast And Easy Insertion ; O It Should Have Intubation Capability Using Standard Et-Tubes ; O It Should Allow Placement Of Maximum 8.0 Et Tube Through The Airway ; O Cuff And Airway Tube Should Be Moulded As A Single Unit For Safety - No Separation ; O The Cuff Should Have Reinforced Tip To Avoid Kinking During Insertion ; O Should Have Integrated Bite Resistance To Prevent Airway Occlusion ; O It Should Have Depth Marks For Monitoring Correct Positioning Of The Mask ; O The Pilot Balloon Should Provide Mask Size & Tactile Indication Of Degree Of Inflation ; O It Should Have Navigation Marks For Guiding Flexible Scope During Intubation ; O It Should Provide Maximum Intra-Cuff Pressure Of Up To 60 Cmh20 ; O It Should Have 15 Mm Male (Iso) Airway Connector ; O It Should Be Made Of 100% Dehp-Free Medical Graded Material ; O It Should Be Disposable, Eliminating Chances Of Cross Contamination ; O It Should Be Mr Safe ; O Should Be Available In All Standard Sizes To Accommodate Any Age Group Of Patients ; O Should Be Us Fda, Ce & Iso Certified For Quality Assurance , Intubation Pressure Bag , Io Drape Extra Large Size: 90X45cm Adhesive Area : 60X45cm. For Covering Incision Area In All Kindof Surgeries Povidine Iodine 5% Adhesive Coated (45 Gsm Approx)Pu Film. Eto Strlized . 5Years Expiry Self Life. , Io Drape Large Size: 50X35cm Adhesive Area 35X35cm. For Covering Incision Area In All Kindof Surgeries Povidine Iodine 5% Adhesive Coated (45 Gsm Approx)Pu Film. Eto Strlized . 5Years Expiry Self Life. , Io Drape Medium Size: 50X25cm Adhesive Area : 30X25cm. For Covering Incision Area In All Kindof Surgeries Povidine Iodine 5% Adhesive Coated (45 Gsm Approx)Pu Film. Eto Strlized . 5Years Expiry Self Life. , Io Drape Small Size 15X10cm Adhesive Area : 10X10cm. For Covering Incision Area In All Kindof Surgeries Povidine Iodine 5% Adhesive Coated (45 Gsm Approx)Pu Film. Eto Strlized . 5Years Expiry Self Life. , Iodine Adhesive Drape Size 15X20) Adhesive 10X20 , Iodine Adhesive Drape Size 25X50) Adhesive 30X25 , Iodine Adhesive Drape Size 35X60) Adhesive 35X35 , Iodine Adhesive Drape Size 90 X 45) Adhesive 60X45 , Iodine Adhesive Drape Size 90 X 45) Adhesive 60X45 , Iv Extension Line 100Cm Doule Lumen , Iv Extension Line 100Cm Tripal Lumen , Iv Extension Line 10Cm Doule Lumen , Iv Extension Line 10Cm Tripal Lumen , Iv Infusion Kit I.V Infusion Kit. ; O Convenient Kit For Quick And Easy Administration Of Intravenous Infusion To A Patient In An Emergency Setting. ; O Kit Contains All The Items Needed To Facilitate Intravenous Delivery. ; O Each Item Is Individually Wrapped, Conveniently Assembled And Packed. ; O Sterile, Individually Packed In A Peel Open Pack. ;; Kit Consists Of : ; O Infusion Set : Standard Non-Vented ; O I.V Cannula : 18, 20, 22 G ; O I.V. Cannula Fixator : 5 X 6 Cm ; O Syringe With Needle : 5 Ml (24 Ng X 1) ; O Alcohol Swab : 45 X 50 Mm ; O Cannula Site Protection Tab : Standard , Jelonet (Paraffom Impregrated Dressing Material , Kehrs T Tube Different Size , Keratome Bevel Down 2.8Mm , Keratome Bevel Down 5.2Mm , Keratome Blade , Knee Drape Material : 50 Gsm Sms Polypropylene Water Repellent.Overall Size240x340cmelastic Aperture. 5Cm Dia. Polysheet Lining. 120X120. Funnel.Polysheet Lining 1.20 X 1.20M.Sterlized Pack. 5Years Expiry Life. Packing Material 45Gsm Polypropylene One Side And Another Side Tyvek Paper 25 Gsm. , L Block - Brass Made , L.P Needle 18, 20 , Lament Needle , Laminospinal Drape Material : 50 Gsmpolypropylene Water Repellent Febric .Sheet Size : 1.5 X 3Mincise Sheet 15 X 35Cm Poly Sheet Lining 1.20 X 1.20Cmpacking Material: 45 Gsm Polypropylene One Side Another Side 25Gsm Tyvek Paper. Strlized Packed With 5 Years Expiry Life. , Laparoscopic Powered Endocutter Stapler 60Mm Medium.Mec60-340 , Laparoscopy Pack- Waterproof Transparent File Dressing With Non Adherant Absorbent Pad., Transparent P.U Films With Hypoallergic Adhesive, Non Woven Absorbent Pad Pkt Of 4 Dressings. Silicon Paper Release Liner , Laproscopic Applicator For 300 Clips , Laproscopic Applicator For 400 Clips , Laryngealmask With Gastric Suction And Intubation Laryngeal Mask With Integrated Gastric Access And Intubation. ; Oit Should Have A Reinforced Tip With Gastric Drainage Port And Should Be Used As An Intubating Laryngeal Mask For Any Brand Or Make. ; O Should Have Pilot Balloon To Identify Mask Size And To Provide Tactile Indication Of Degree Of Inflation. ; O Should Be Mr Safe And Phthalate Free Material. ; O Should Be With Integrated Bite Absorption Area For Airway Occlusion. ; O The Cuff Should Be Soft , Thin & Designed To Deliver High Seal Pressure Upto 40 Cmh20 ; O Available With Sizes 1,1.5,2,2.5,3,4,5,6 ; O Should Have Iso And Ce Marks Confirming To International Standards Of Safety. , Laryngeal Mask Preformed Laryngeal Mask Made Up Of Silicon, ; O Cuff And Tube Moulded As A Single Unit For Extra Safety ; Oit Should Have Reinforced Tip At Cuff To Avoid Kink/Bending During Insertion And To Ensure Proper Sealing, ; O It Should Be Autoclaved Up To Minimum 40 Time. ; O It Should Have Soft Cuff To Ensure Best Possible Seal With Least Possible Internal Pressure. ; O It Should Have Colour Coded Pilot Balloon To Identify Mask Size And To Provide Precise Tactile Indication Of Degree Of Inflation. ; O It Should Have Available Sizes Of 1,1.5,2,2.5,3,4,5,6 ; O Should Be Iso And Ce Certified. , Laryngeal Mask Airwayo Used For Routine And Elective Surgical Procedures. ; O Made Of Soft Pvc, Which Is Thermo-Sensitive Material, For An Atraumatic Insertion And Patient Comfort. ; O Anatomically Correct Curve For Fast And Easy Insertion. ; O Ergonomically Shaped Tube For Firm Grip During Insertion. ; O Aperture Bars To Prevent Blockage Of The Ventilation Lumen From The Epiglottis. ; O Cuff And Airway Tube Molded As One Unit For Extra Safety. ; O Soft Cuff Ensures A Good Seal With Low Mucosal Pressure. ; O Pilot Balloon Identifies Mask Size And Provides Precise Tactile Indication Of Degree Of Inflation. ; O Ventilation Tube Clearly Marked With All Information Like Mask Size, Patients Weight And Cuff Inflation Volume. ; O Supplied Sterile Individually Packed In Blister Pack Lid. , Latex Free, Mri Compatible Needle Free Devices Dou , Latex Free, Mri Compatible Needle Free Devices Trio , Latex Free, Mri Compatible Needle Free Devices Uno , Leader Cath Aeterial Line All Size , Leak & Puncture Resistant Sharps Collectors With Brackets Facilitating One Handed Disposal, Satisfying Niosh Guidelines On Sharps Disposal Containers, Made Of Nontoxic Colorants And Compliance With Coneg Heavy Metal Limits. 1.5Qt , Leak & Puncture Resistant Sharps Collectors With Brackets Facilitating One Handed Disposal, Satisfying Niosh Guidelines On Sharps Disposal Containers, Made Of Nontoxic Colorants And Compliance With Coneg Heavy Metal Limits. 1Qt , Leak & Puncture Resistant Sharps Collectors With Brackets Facilitating One Handed Disposal, Satisfying Niosh Guidelines On Sharps Disposal Containers, Made Of Nontoxic Colorants And Compliance With Coneg Heavy Metal Limits. 5.4Qt , Light Wt Layer Form Hemostate With Bactericidal 2X4 , Lightweight Elasticated Tubular Dressing For Retention With 2-Way Stretch Technology (Radial & Longitudinal Stretch) With Blue Color Coding For Identification Size. Fabric Is Of Viscose Elastane. Size- 7.5X1000 Cm , Lightweight Elasticated Tubular Dressing For Retention With 2-Way Stretch Technology (Radial & Longitudinal Stretch) With Green Color Coding For Identification Size. Fabric Is Of Viscose Elastane. Size- 5X1000 Cm , Lightweight Elasticated Tubular Dressing For Retention With 2-Way Stretch Technology (Radial & Longitudinal Stretch) With Purple Color Coding For Identification Size. Fabric Is Of Viscose Elastane. Size- 20X1000 Cm , Lightweight Elasticated Tubular Dressing For Retention With 2-Way Stretch Technology (Radial & Longitudinal Stretch) With Red Color Coding For Identification Size. Fabric Is Of Viscose Elastane. Size- 3.5X1000 Cm , Lightweight Elasticated Tubular Dressing For Retention With 2-Way Stretch Technology (Radial & Longitudinal Stretch) With Yellow Color Coding For Identification Size. Fabric Is Of Viscose Elastane. Size- 10.75X1000 Cm , Lma Diff Size, Double Lumen With Gastric Access & 100% Silicone , Luer Lok Disposable Syringes:Syringe Made Of Polypropylene Plastic (Pvc Free Plastic) ; Syringe Nozzle Design: Luer Lok ; Packing: Blister With Medical Grade Paper ; Sterilized With Eto ; Polyisoprene Used As Stopper (Latex Free Syringe) ; Silicone Oil Used As Lubricant ; 1Ml With Needle , Luer Lok Disposable Syringes:Syringe Made Of Polypropylene Plastic (Pvc Free Plastic) ; Syringe Nozzle Design: Luer Lok ; Packing: Blister With Medical Grade Paper ; Sterilized With Eto ; Polyisoprene Used As Stopper (Latex Free Syringe) ; Silicone Oil Used As Lubricant ; 2Ml With Needle , Luer Lok Disposable Syringes:Syringe Made Of Polypropylene Plastic (Pvc Free Plastic) ; Syringe Nozzle Design: Luer Lok ; Packing: Blister With Medical Grade Paper ; Sterilized With Eto ; Polyisoprene Used As Stopper (Latex Free Syringe) ; Silicone Oil Used As Lubricant ; 3Ml With Needle , Luer Lok Disposable Syringes:Syringe Made Of Polypropylene Plastic (Pvc Free Plastic) ; Syringe Nozzle Design: Luer Lok ; Packing: Blister With Medical Grade Paper ; Sterilized With Eto ; Polyisoprene Used As Stopper (Latex Free Syringe) ; Silicone Oil Used As Lubricant ; 5Ml With Needle , Luer Lok Disposable Syringes:Syringe Made Of Polypropylene Plastic (Pvc Free Plastic) ; Syringe Nozzle Design: Luer Lok ; Packing: Blister With Medical Grade Paper ; Sterilized With Eto ; Polyisoprene Used As Stopper (Latex Free Syringe) ; Silicone Oil Used As Lubricant ; 10Ml With Needle , Luer Lok Disposable Syringes:Syringe Made Of Polypropylene Plastic (Pvc Free Plastic) ; Syringe Nozzle Design: Luer Lok ; Packing: Blister With Medical Grade Paper ; Sterilized With Eto ; Polyisoprene Used As Stopper (Latex Free Syringe) ; Silicone Oil Used As Lubricant ; 20Ml Without Needle , Lumber External Csf Drainage Systems.Contains One Double Chamber Bag, Bag Anchoring Panel, One 30Cm Lumber Catheter With 14G Touhey Needle,Connecter,Suture Collar And Connecting Tube. , Malleable Stylet All Sizes , Mammography Flims Size (18X24cm) , Measured Volume Seto 100% Latex Free Set Provided With Y Type Injection Port Made Up Of Silicone For Additional Medication And Luer Slip Connector.O Equipped With A Micro Drip With Reduced Drop Size Of 60 Drops Per Ml. ; O Provided With A Burette Type Chamber Of 100 Ml Capacity With 10 Ml Overflow Limit. ; O Burette Chamber Is Made Of Bio-Compatible Medical Grade Transparent Styrene Polymer, Suitable For Infusing All Types Of Fluids. ; O Patent Design Hanger Facilitates Hanging On The I.V. Stand. ; O Unique Floating Auto Shut Off Valve Acts As A Floating Indicator And Automatically Shuts Off The Drain Path To Prevent The Passage Of Air In The Line. ; O No-Kink Device Prevents Kinking Of Tube During Transportation And Transfers. ; O Separate Plugs For Extra Medication And Change Over. ; O Sterile, Individually Packed. , Medicated Bath Wipes- Anti-Bacterial Bath Wipes Ready To Use Protecting Against Nosocomial Infection .Ingredient Chlorhexidine Gluconate Solution I.P 2% W/V , Purified Aqua, Tocopheryl Acetate, Glycerin, Phenoxyethanol, Fragrance, Aloevera Liquid Extract, Ph Stabilizers And Excipients. Ph Of Formulation: 5.5, . Material - Non Woven Fabric. Size - 32X30 Cm, Pack Of 10S In Ziplock Pack. , Melicot Catheter Diff Size , Mersilk Black Braided 76 Cm,1/2 Circle Oval Round Body Jb,Needle-26 Mm,Size-2-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,1/2 Circle Reverse Cutting,Needle-50 Mm,Size-2-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-3-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-4-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,1/2 Circle Tapercut,Needle-25 Mm,Size-2-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,3/8 Circle Cutting,Needle-60 Mm,Size-1,Box Of-12 Foils , Mersilk Black Braided 76 Cm,3/8 Circle Reverse Cutting,Needle-26 Mm,Size-3-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,3/8 Circle Reverse Cutting,Needle-45 Mm,Size-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,3/8 Circle Reverse Cutting,Needle-45 Mm,Size-2-0,Box Of-12 Foils , Mersilk Black Braided 76 Cm,3/8 Circle Round Body,Needle-30 Mm,Size-0,Box Of-12 Foils , Mersilk Black Braided 90 Cm,1/2 Circle Round Body,Needle-16 Mm,Size-4-0,Box Of-12 Foils , Mersilk Black Braided 90 Cm,1/2 Circle Round Body,Needle-25 Mm,Size-3-0,Box Of-12 Foils , Mersilk Black Braided 90 Cm,1/2 Circle Round Body,Needle-30 Mm,Size-0,Box Of-12 Foils , Mersilk Black Braided 90 Cm,1/2 Circle Round Body,Needle-30 Mm,Size-2-0,Box Of-12 Foils , Mersilk Black Braided 90 Cm,3/8 Circle Cutting Ethiprime,Needle-16 Mm,Size-3-0,Box Of-12 Foils , Mersilk Black Braided 90 Cm,3/8 Circle Cutting Ethiprime,Needle-16 Mm,Size-4-0,Box Of-12 Foils , Mersilk Blackbraided 76 Cm,3/8 Circle Round Body,Needle-16 Mm,Size-4-0,Box Of-12 Foils , Mesh Fixation Device-Absorbable-15 Spikes , Mesh Fixation Device-Absorbable-30 Spikes , Mesh Fixation Device-Non Absorbable-15 Spikes , Mesh Fixation Device-Non Absorbable-30 Spikes , Metalic Airway (Adult) , Micro Driplnfusion Set , Micro Suction Cannula , Microlaryngeal Tube Size 5.5,6.5 , Microsensor Basic Kit (Contains Codman Microsensor Icp Transducer & 14 Gauge Touchy Needle With Stylet) (Can Be Used In Both Subdural & Intraparenchymal Pressure Monitoring Applications) , Microsensor Skull Bolt Kit (Contains Codman Microsensor Icp Transducer Along With Winged, 0.7 Mm Skull Bolt With Leak Proof Compression Cap, Spacing Washer, Obturator / Durapierce, 2.7 Mm Drill Bit, Hex Wrench) , Microsensor Ventricular Catheter Kit (Contains 38 Cm Clear Ventricular Cathetor With Preloaded Stylet, Integrated Maniature Strain Gauge Pressure Transducer, 7 Gauge Tunneling Trocar For Placement, Catheter Anchoring Clip) (In Conjunction With Icp Express Monitor This Can Be Used Wide Variety Of Patient Monitring Systems For Display Of Icp Wave Form Or For Consideration Of Icp Data With Other Vital Clinical Monitoring Information) , Microtome Blades-High Profile,Disposable Blades, Stainless Steel , Mini Closed Wound Suction Set O Close Wound Drainage Device Under Negative Pressure. ; O Suitable For Minor Surgery. ; O The Drain Has Been Provided With A Radio-Opaque Line For X-Ray Visualization. ; O Burr Free Smooth Eyes At The Distal End For Efficient Trauma Free Performance. ; O Easy To Use By One Person To Depress The Chamber To Activate The Suction Of Bellow Unit. ; O Sterile, Individually Packed., Size: 8Fg , Mist Blowero Surgical Blower Humidifier Intended For Use During Cardiac And Other Fine Surgeries. ; O Made Up Of Latex Free, Non-Toxic Medical Grade Material. ; O Specially Designed For Improving The Visibility At Anastomotic Or Other Fine Surgical Sites. ; O It Creates A Consistent And Predictable Blood Clearing Mist. ; O An Irrigation Mist Gently Clears Blood From The Site, Improving Visualization Without Drying Or Desiccating Delicate Tissue. ; O Design Of The Device Is Such That It Enables Easy Maneuverability And ; Convenient Handling. ; O Consists Of An Extra Soft Tip, Preceded By A Shaft And A Soft Textured, Ergonomic Handle Followed By A Flexible Connector Provided With A Dual Lumen Tubing That Entails Passage Of Normal Saline At Gentle Air Pressure. ; O Combination Of Fluid And Gentle Air Forms A Fine Humidifier Spray, Enabling ; Easy Visibility At The Anastomosis Sites. ; O Sterile, Individually Packed In A Box. , Mucus Extractoro Specially Designed For Aspiration Of Secretions From Oropharynx In Newly Born Babies To Ensure Free Respiration. ; O Also Ideal For Obtaining Mucus Specimen For Micro Biological Examinations. ; O Transparent Container Manufactured From Medical Grade Polypropylene. ; O Clear Transparent Container Permits Immediate Visual Examination Of The Aspirate Collected. ; O Low Friction Surface Of Catheter Is Provided With Open End Silk Smooth Round ; Tip, For Trauma Free Insertion And Suction. ; O Spare Plug Cap Is Provided To Seal The Container For Safe Transportation Of Specimen To Laboratory Or For Aseptic Disposal Of Container. ; O Sterile, Individually Packed In A Peelable Soft Blister Pack. , Multibic Solution , Multifiltrate Dialysate Line (158Ml) , Multifiltrate Substituate Line- 1Heater Bags , Mvr Blade , Mvr Vitrectomy Blade , N-95 Mask , Nasal Cannula Ojr 412-M , Nasal Cannula Ojr 412-S , Nasal Prong For Oxygen Therapy - Adult , Nasal Prong For Oxygen Therapy - Paediatric , Nasogastric Tubeplain Nasogastric Tube/ Ryles Tube. ; O The Tube Is Marked At 50, 60 And 70 Cm From The Tip For Accurate Placement. ; O Designed For Introduction Of Nutrition And Aspiration Of Gastric Contents. ; O Made Up Of Non-Toxic, Non-Irritant And Kink Resistant Medical Grade Pvc. ; O Super Smooth, Low Friction, Frozen Surface Facilitates Atraumatic Intubation. ; O Four Lateral Eyes Are Provided For Efficient Aspiration And Administration. ; O Smooth Outer Surface Also Ensures To Reduce Chances Of Tissue Irritation. ; O Distal End Is Coned With Radio Opaque Material For Easy Intubation. ; O Patented Soft Dual Port Connector At The Proximal End To Fit Easily With The Syringe Or Feeding Bag. ; O Radio-Opaque Line For X-Ray Visualization. ; O Colour Coded For Instant Size Identification. ; O Sterile, Individually Packed In Peelable Soft Blister Pack, Size: 8Fg To 20Fg , Nasopharyngeal Airway Suitable For Suctioning In I.C.Us And Provide An Alternative Way When Oro- Pharyngeal Airway Is Occluded. ; O Design Of The Tube Conforms To The Nasopharyngeal Anatomy. ; O Flexible For Maximum Patient Comfort ; O Tube Manufactured In Medical Grade Pvc Is Soft, Flexible And Kink Resistant. ; O Soft Material For Enhanced Nasal Passage Comfort. ; O Atraumatic Soft-Rounded Edges And Smooth Surface. ; O Specially Designed Bevel Tip Reduces Mucosal Trauma During Insertion. ; O Tube Marked With The Internal Diameter For Easier Size Identification. ; O Thin Wall Construction Provides Maximum Inner Diameter. ;Interior Walls With Channel Grooves Facilitate Easy Insertion Of Catheter. ; O Removable 15 Mm Connector To Allow Connection To Ventilation Systems. ;Individually Packed In Peelable Pack. , Nasopharyngeal Airway With Roatator-Diff. Size , Nasorbable Airway With Roatator-Diff.Size , Nebulizer T-Piece With 2 Mtr Oxygen Tube , Nebulizer Tubing Set , Nebulizing Masko Mask With Soft Seal And Strap For Better Fit And Comfort. ; O Manufactured From Medical Grade Pp Material, Making It Lighter Than A Pvc Mask. ; O No Unpleasant Odor As Associated With Other Masks. ; O Special Soft Seal Provides Comfort Around The Face. ; O Enables The Patient To Wear The Mask For Longer Duration. ; O The Cushion Also Provides Better Concentration As It Forms A Seal Between Facial Muscles And Mask Thereby Reducing The Wastage Of Medication. ; O Leaves Little Air Blind Angle Which Limits Breath Of Exhaust. ; O Sealing Edge Of Contour Line Greatly Eliminates Discomfort Caused By The Oppression To Facial Nerve. ; O No Metal Nose Clip, Making The Product Mri Compatible. ; O Individually Packed In Poly Bag. , Needle Bone Marrow/Puncture Needle/Bone Marrow Display Needle, Size-14/16 Gauze , Needle Certrofix (Duo) (Adult) , Needle Certrofix (Duo) (Paediatric) , Needle Certrofix (Mono) (Adult) , Needle Certrofix (Mono) (Paediatric) , Needle Certrofix (Trio) (Adult) , Needle Combined Epidural And Spinal Needle With Catheter Set , Needle Disposable For Nerve Locator Shor Bevel Needle For Plexus Anaesthesia (0.7*50Mm,18G*2) , Needle Disposable For Nerve Locator Shor Bevel Needle For Plexus Anaesthesia (0.7*50Mm,20G*2) , Needle Disposable For Nerve Locator Shor Bevel Needle For Plexus Anaesthesia (0.7*50Mm,22G*2) , Needle Epidural No 16G , Needle Epidural No 18G , Needle Epidural With Catheter Set No 16G , Needle Epidural With Catheter Set No 18G , Needle Liver,Kidney ,Pleural Biopsy Needle(Different Size) , Needle Spinal Quinckle Bibcock No 25 , Needle Spinal Quinckle Bibcock No 26 , Needle Spinal Quinckle Bibcock No 27 , Needle Trephine Biopsy Needle , Needless Iv System With Closed Luer Access Having Self Sealing Silicone Split Septum With15cm Extension Set Bi& Tri (Not Reverse Septum) And Transparent Housing. , Negative Flow Attachment , Nelataion Cathetero Designed For Short Term Bladder Catheterization Through Urethera. ; O Manufactured From Medical Grade Pvc Compatible With Catheter Lubricants. ; O Frozen Surface Tubing For Super Smooth Intubation. ; O Atraumatic, Soft Rounded And Closed Tip Catheter Facilitates Drainage. ; O Coned Distal End Ensures An Optimal Sliding Quality And Care For The Sensitive Tissue To Achieve Atraumatic Catheterization. ; O Two Lateral Eyes For Efficient Drainage. ; Oradio-Opaque Line Provided Throughout The Length Of The Catheter For Proper X-Ray Visualization. ; O Universal Funnel Shape Connector For Easy Connection To Urine Bag. ; O Colour-Coded Funnel Connector Of The Catheter Provides Instant Identification Of The Sizes. ; O Sterile, Ready For Use. Size: 6Fg To 20Fg , Neonatal Diaper , Nibp Cuff With Hose Adult , Nirs/ Cerebral Oximetry Module For Hemosphere Monitor. ; Nirs/ Cerebral Oximetry Sensors - Large ,Medium, Small, Neonatal , Niterial Gloves , Nitrile Gloves - No.- 7 , Niv Mask With Resuable Gel (S, M, L) , Non Rebreathing Mask , Non Rebrething Mask , Nylon Black Monofilament 100 Cm,1/2 Circle Reverse Cutting (Heavy),Needle-45 Mm,Size-1,Box Of-12 Foils , Nylon Black Monofilament 100 Cm,1/2 Circle Reverse Cutting (Heavy),Needle-50 Mm,Size-1,Box Of-12 Foils , Nylon Black Monofilament 150 Cm Loop,1/2 Circle Round Body (Heavy),Needle-48 Mm,Size-1,Box Of-12 Foils , Nylon Black Monofilament 25 Cm,3/8 Circle Round Body Micro-Point,Needle-4 Mm,Size-10-0,Box Of-12 Foils , Nylon Black Monofilament 30 Cm,3/8 Circle Spatulated Micro-Point 140-6 Cs-Ultima Double Needle,Needle-6 Mm,Size-10-0,Box Of-12 Foils, , Nylon Black Monofilament 38 Cm,3/8 Circle Spatulated Micro-Point Double Needle,Needle-6 Mm,Size-10-0,Box Of-12 Foils , Nylon Black Monofilament 38 Cm,3/8 Circle Spatulated Micro-Point,Needle-6 Mm,Size-10-0,Box Of-12 Foils , Nylon Black Monofilament 70 Cm,3/8 Circle Cutting Ethiprime,Needle-16 Mm,Size-3-0,Box Of-12 Foils , Nylon Black Monofilament 70 Cm,3/8 Circle Reverse Cutting,Needle-26 Mm,Size-3-0,Box Of-12 Foils , Nylon Black Monofilament 70 Cm,3/8 Circle Reverse Cutting,Needle-45 Mm,Size-2-0,Box Of-12 Foils , Octenidine Based Wash Lotion With Neutral Ph, Tested As Per European Norms Containing Octenidine Hcl, Aqua, Cocamidopropylamine Oxide, Peg-7 Glyceryl Cocoate, Glycerin, Hydroxyethyl-Cellulose, Lactic Acid, Contains Allantoin ; For Full Body Wash - Head To Toe , Octenidine Based Wash Mitts With Pratical Hand Dimension, Tested As Per European Norms Containing Octenidine Hcl,Aqua, Glycerine, Cocamidopropylamine Oxide, Sodium Lactate, Allantoin,Ethylhexyl Glycerine, , Oesophageal Stethoscope With Continious Core Body , Open Applicator Small 20Cm Length For 100Clips , Open Applicator Small 20Cm Length For 200Clips , Open Applicator Small 20Cm Length For 300Clips , Open Applicator Small 20Cm Length For 400Clips , Operating Microscope Drainage (Sterile) , Oro-Pharyngeal Airway O Guedel Airways Are Designed To Maintain An Unobstructed Oropharyngeal Airway During Or Following General Anaesthesia And In Patients Who Are Unconscious For Other Reasons. ; O Manufactured From Non-Toxic, Non-Irritant Pe Polymer. ; O Atraumatic Soft-Rounded Edges. ; O Provides Access For The Insertion Of Suction Catheters. ; O Flexible To Ensure Dental Protection. ; O Integral Hard Bite Block Avoids Airway Occlusion And Biting Of Tongue. ; O Design Of The Tube Conforms To The Oropharyngeal Anatomy. ; O Stepless Airway Path For Easy Cleaning. ; O Bite Blocks Are Color Coded For Instant Size Identification. ; O Individually Packed In Peelable Soft Blister Pack. ; O Sterile, Ready For Use. , Oropharyngeal Guedles Airway Size 0 , Oropharyngeal Guedles Airway Size 1 , Oropharyngeal Guedles Airway Size 2 , Oropharyngeal Guedles Airway Size 3 , Oropharyngeal Guedles Airway Size 4 , Oxidized Regenerated Cellulose,1*2In Fiber , Oxidized Regenerated Cellulose,2*14In Standard , Oxidized Regenerated Cellulose,2*3In Standard , Oxidized Regenerated Cellulose,2*4In Fiber , Oxidized Regenerated Cellulose,4*4In Fiber , Oxidized Regenerated Cellulose,4*8In Standard , Oxygen Extension Tube , Oxygen Maskoxygenmask With Soft Seal And Strap For Better Fit And Comfort. ; O Manufactured From Medical Grade Pp Material, Making It Lighter Than A Pvc Mask. ; O No Unpleasant Odor As Associated With Other Masks. ; O Special Soft Seal Provides Comfort Around The Face. ; O Enables The Patient To Wear The Mask For Longer Duration. ; O The Cushion Also Provides Better Concentration Of Oxygen As It Forms A Seal Between Facial Muscles And Mask Thereby Reducing The Wastage Of Oxygen. ; O Leaves Little Air Blind Angle, Limiting Breath Of Exhaust. ; O Sealing Edge Of Contour Line Greatly Eliminates Discomfort Caused By The Oppression To Facial Nerve. ; O No Metal Nose Clip, Making The Product Mri Compatible. ; O Individually Packed In Poly Bag. , Oxygen Mask Kit , Oxygen T-Piece Kit , Oxygenator With Intergrated Filter , P M Line 150 Cm , P M Line 200 Cm , Pacing Wire , Paper Roll For Records On Multi Para Monitor , Paper Tapeo Non-Woven Microporous Surgical Tape. ; O Skin Colored Tape Is Gentle To The Skin. ; O Provided With Unique Wavy Pattern Throughout The Surface Which Allows High Air Permeability And Ensures Painless Removal. ; O Uniformly Coated With Hypoallergenic Adhesive. ; O Excellent Adhesion To The Skin Due To Superior Quality Of The Glue. ; O Tape Is Thin, Soft And Flexible For Improved Patient Comfort. ; O Tape Is Easy To Tear From Roll And Apply. ; O Easy To Peel Off From The Skin Without Causing Any Discomfort. ; O Non-Sterile, Packed In A Box. , Patient Circuit Disposable , Patient Circuit Hose Connector Tube Long Type For Ventilator , Patient Identification Band Along With Logo Of Rims For Adult & Pediatric , Patient Identification Band Along With Logo Of Rims For Mother & Baby (Combined) , Patient Identification Band Along With Logo Of Rims For Mother & Baby(Combined) , Pcn Set 10Fr , Pediatric Anaesthesia Circuit , Pediatric For Regional Oximetry , Pediatric For Regional Oximetry , Peep Valve O It Can Be Used With Manual Resuscitators, Ventilators, Anaesthesia Machines And Cpap Systemso It Should Maintain A Wide Range Of Pressure Between 1.5 - 20 Cmh2oo It Should Have 30 Mminlet Connector To Be Fitted With Any Circuit And System , Pencil Point Spinal Needlepencil Point Spinal Needle With Precision Formed Side Hole Having Sculptured And Translucent Hub. Sizes: 27G & 25G With Introducer. , Pencil Point Spinal Needle With Precision Formed Side Hole Having Sculptured And Translucent Hub. Size- 25G & 27G With Introducer. , Percutaneous Tracheostomy Kito Specially Designed Kit Permits A Safe, Fast, And Cost-Effective Percutaneous Tracheostomy Procedure With Minimal Complications. Complete Kit Consists Of : ; O Percutaneous Tracheostomy Tube ; O Dilating Forceps ; O J-Tip Guide Wire ; O Syringe-10 Ml ; O Dilating Cannula ; O Dilator ; O Scalpel ; O Cotton Tape , Percutaneous Tracheostomy Tubeo Percutaneous Tracheostomy Tube, An Artificial Airway To Provide Access To Patients Airway, Protection From Aspiration And To Provide Access To Lower Respiratory Tract For Airway Clearance. ; O Minimal Invasive Approach Leads To Small Incisions. ; O Enables The Procedure To Be Performed At The Point Of Care, When The Doctor And Patient Are Readily Available. ; O Tapered Tip For Easy Passage Into The Stoma. ; O Low-Pressure Cuff And Tip Reduce Insertion Force, And Conform To The Individual Patients Anatomy. ; O Sterile, Individually Packed In A Box. ; O Ready For Use. , Peripherally Insrted Centralvenous Polyurethane Catheter Pucc Line , Plain Sheet Material : 25 Micron Thick Pe Hygiene Film . Size :1.20 X 1.20Cmeto Sterlized Packing Material: 45 G Polypropylene Film One Side And Another Side 25Gsm Tyvek Paper With 5 Years Expiry Life. , Plain Sheetmaterial : 25 Micron Thick Pe Hygiene Film . Size :150 X 1.20Cmeto Sterlized Packing Material: 45 G Polypropylene Film One Side And Another Side 25Gsm Tyvek Paper With 5 Years Expiry Life. , Plain Sheet Large Material : 25 Micron Thick Pe Hygiene Film . Size :2.1 X 1.20Cmeto Sterlized Packing Material: 45 G Polypropylene Film One Side And Another Side 25Gsm Tyvek Paper With 5 Years Expiry Life , Plain Towelmaterial : 25 Micron Thick Pe Hygiene Film . Size : 66 X 1.20Cmeto Sterlized Packing Material: 45 G Polypropylene Film One Side And Another Side 25Gsm Tyvek Paper With 5 Years Expiry Life , Plasma Filter (P1 Dry) , Plasma Filter (P2 Dry) , Plastic Dropper , Plastic Eye Shields , Plastic Slide Box , Plastic Slide Box , Pleural Catheterindwelling Pleural Catheter Of 15.5 Fr Made Up Of Silicone With Beveled Fenestration, Proprietary Safety Valve And Polyester Cuff To Prevent The Dislodgment Of The Catheter ; A.) Guidewire Introducer With Needle ; B.) J-Tip Guidewire ,60Cm ; C.) Syringe 10Cc ; D.) Peel-Away Introducer ,16Fr ; E.) Tunneler ; F.) Blue Wrap ; G.) Drainage Line With Lockable Access Tip ; H.) Needle ,17G * 2.5Cm ; I.) 5-In-1 Drainage Line Adapter And Valve Cap ; Also System Has Dressing Set Of 6 Gauze Pad (10.2Cm *10.2Cm) , Foam Catheter Pad, Needle Foam Stop , Self-Adhesive Transparent Water Proof Dressing And Chart Labels ;1000 Ml Vacuum Bottle With Active Vacuum Technology Which Drains Quickly And Comfortably Without The Need Of Gravity. , Plypropylene Mesh Size 15Cm X 15Cm , Plypropylene Mesh Size 30Cm X 30Cm , Plypropylene Mesh Size 6Cm X 11Cm , Plypropylene Mesh Size 7.6Cm X 15.2Cm , Pmma , Pocket Mask /Rescue Mask Adult Pocket Mask It Should Be Made Of Soft Medical 100% Latex Free Material It Should Be Transparent, Reusable, Easy-To-Clean It Should Have A Replaceable One-Way Valve With Bacterial Filter Valve Should Be Sterilisable It Should Be Supplied In Hard Carry Box Mask Should Be Provided With An Elastic Band To Place It Around The Patients Head (Helps Keep The Mask In Place). It Should Be Supplied In Soft Case With One Adult And One Paediatric Mask. ; With Iso And Ce Marks Confirming To International Standards Of Safety , Poliglecapron Antibacterial Monofilament Undyed 70 Cm,3/8 Circle Reverse Cutting Fs,Needle-26 Mm,Size-3-0,Box Of-12 Foils, , Poliglecapron Antibacterial Monofilament Undyed 70 Cm,3/8 Circle Reverse Cutting Ps-1 Ethiprime,Needle-24 Mm,Size-3-0,Box Of-36 Foils, , Poliglecapron Dyed Monofilament 70 Cm,1/2 Circle Oval Round Body Visi-Black Jb,Needle-26 Mm,Size-3-0,Box Of-12 Foils , Poliglecapron Undyed Monofilament 70 Cm,1/2 Circle Oval Round Body Jb,Needle-26 Mm,Size-3-0,Box Of-12 Foils , Poliglecapron Undyed Monofilament 70 Cm,3/8 Circle Cutting Ethiprime,Needle-25 Mm,Size-3-0,Box Of-12 Foils , Polydioxanone Undyed Monofilament 45 Cm,3/8 Circle Reverse Cutting Ps 3,Needle-16 Mm,Size-4-0,Box Of-24 Foils , Polydioxanone Undyed Monofilament 45 Cm,3/8 Circle Reverse Cutting Ps 3,Needle-16 Mm,Size-5-0,Box Of-24 Foils , Polydioxanone Voilet Monofilament 150 Cm Loop,1/2 Circle Round Body (Heavy),Needle-40 Mm,Size-0,Box Of-12 Foils , Polydioxanone Voilet Monofilament 150 Cm Loop,1/2 Circle Round Body (Heavy),Needle-50 Mm,Size-1,Box Of-12 Foils , Polydioxanone Voilet Monofilament 150 Cm Loop,1/2 Circle Round Body Ctx,Needle-48 Mm,Size-1,Box Of-24 Foils , Polydioxanone Voilet Monofilament 45 Cm,1/2 Circle Round Body Rb-2,Needle-13 Mm,Size-4-0,Box Of-36 Foils , Polydioxanone Voilet Monofilament 70 Cm,1/2 Circle Round Body Ct,Needle-40 Mm,Size-0,Box Of-24 Foils , Polydioxanone Voilet Monofilament 70 Cm,1/2 Circle Round Body Mh-1,Needle-31 Mm,Size-3-0,Box Of-36 Foils , Polydioxanone Voilet Monofilament 70 Cm,1/2 Circle Round Body Rb-2 Double Needle,Needle-13 Mm,Size-5-0,Box Of-36 Foils , Polydioxanone Voilet Monofilament 70 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-3-0,Box Of-12 Foils , Polydioxanone Voilet Monofilament 70 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-4-0,Box Of-12 Foils , Polydioxanone Voilet Monofilament 75 Cm,1/2 Circle Round Body Double Needle,Needle-20 Mm,Size-3-0,Box Of-12 Foils , Polydioxanone Voilet Monofilament 90 Cm,1/2 Circle Reverse Cutting (Heavy),Needle-50 Mm,Size-1,Box Of-12 Foils , Polydioxanone Voilet Monofilament 90 Cm,1/2 Circle Reverse Cutting Os,Needle-40 Mm,Size-1,Box Of-12 Foils , Polydioxanone Voilet Monofilament 90 Cm,1/2 Circle Round Body (Heavy),Needle-40 Mm,Size-0,Box Of-12 Foils , Polydioxanone Voilet Monofilament 90 Cm,1/2 Circle Round Body (Heavy),Needle-40 Mm,Size-1,Box Of-12 Foils , Polydioxanone Voilet Monofilament 90 Cm,1/2 Circle Taper Cut V-34,Needle-36 Mm,Size-1,Box Of-24 Foils , Polydioxanone Voilet Monofilament 90 Cm,1/2 Circle Tapercut V-37,Needle-40 Mm,Size-0,Box Of-24 Foils , Polyether Ether Ketone Sternal Closure Device With Needle. , Polymer Clip Extra Large,Size-400 , Polymer Clip Large,Size-300 , Polymer Clip Medium - Large,Size-200 , Polymer Clip Open Applicator 200-30 Deg , Polymer Clip Open Applicator 300-30 Deg , Polymer Clip Open Applicator 400-30 Deg , Polypropylene Blue Monofilament 100 Cm,1/2 Circle Reverse Cutting (Heavy),Needle-45 Mm,Size-1,Box Of-12 Foil , Polypropylene Blue Monofilament 100 Cm,1/2 Circle Tapercut (Heavy),Needle-30 Mm,Size-1,Box Of-12 Foil , Polypropylene Blue Monofilament 122 Cm,1/2 Circle Taper Point Mh Ethalloy Double Needle,Needle-36 Mm,Size-2-0,Box Of-36 Foil , Polypropylene Blue Monofilament 150 Cm Loop,1/2 Circle Round Body (Heavy),Needle-48 Mm,Size-1,Box Of-12 Foil , Polypropylene Blue Monofilament 150 Cm Loop,1/2 Circle Round Body,Needle-40 Mm,Size-0,Box Of-12 Foil , Polypropylene Blue Monofilament 45 Cm,3/8 Circle Reverse Cutting,Needle-12 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,1/2 Circle Cc-5 (320 Microns) Double Needle,Needle-11 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,1/2 Circle Taper Point Tf Double Needle,Needle-13 Mm,Size-5-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,1/2 Circle Taper Point Tf Ethalloy Double Needle,Needle-13 Mm,Size-4-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cc (220 Microns) Double Needle,Needle-9.3 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cc (220 Microns) Double Needle,Needle-9.3 Mm,Size-8-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cc (220 Microns) Multipass Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cc Hemo-Seal Multipass Double Needle,Needle-9.3 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cc-1 (282 Microns) Multipass Double Needle,Needle-13 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cc-11 (220 Microns) Double Needle,Needle-11 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Curved Round Body Ethigltde Double Needle,Needle-6 Mm,Size-7-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Curved Round Body Ethigltde Double Needle,Needle-9 Mm,Size-8-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Cutting Cc (220 Microns) Double Needle,Needle-8 Mm,Size-7-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body (282 Microns) Double Needle,Needle-13 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body (282 Microns)Bv Double Needle,Needle-11 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body Bv-1 Double Needle,Needle-9 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body Bv-1 Double Needle,Needle-9 Mm,Size-7-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body C-1 (282 Microns) Double Needle,Needle-13 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body Visi-Black (220 Microns) Bv-1 Ethalloy Double Needle,Needle-9.3 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body Visi-Black (220 Microns) Bv-1 Ethalloy Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body Visi-Black (320 Microns) Double Needle,Needle-13 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Round Body Visi-Black C-1 (220 Microns) Double Needle,Needle-13 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv 175-6 Ethalloy Double Needle,Needle-8 Mm,Size-8-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv 175-7 Ethalloy Double Needle,Needle-8 Mm,Size-7-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv 175-8 Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv-1 30-5 Ethalloy Double Needle,Needle-6.5 Mm,Size-8-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv-1 Ethalloy Double Needle,Needle-9.3 Mm,Size-6-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv-1 Ethalloy Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv-1 Ethalloy Hemo-Seal Double Needle,Needle-9.3 Mm,Size-5-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point Bv175-6 Ethalloy Double Needle,Needle-8 Mm,Size-7-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Taper Point C-1 Ethalloy Double Needle,Needle-13 Mm,Size-6-0,Box Of-36 Foil , Polypropylene Blue Monofilament 60 Cm,3/8 Circle Visi-Black Cc175-6 Double Needle,Needle-8 Mm,Size-8-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Round Body (Heavy),Needle-30 Mm,Size-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Round Body (Heavy),Needle-30 Mm,Size-1,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Round Body (Heavy),Needle-40 Mm,Size-1,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Round Body Double Needle,Needle-25 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Round Body,Needle-25 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Tapercut,Needle-25 Mm,Size-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,1/2 Circle Tapercut,Needle-25 Mm,Size-2-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,3/8 Circle Cutting Precision Cosmetic Pc-3,Needle-15 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,3/8 Circle Cutting,Needle-22 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,3/8 Circle Reverse Cutting,Needle-45 Mm,Size-2-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,3/8 Circle Round Body Double Needle,Needle-10 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,3/8 Circle Round Body Double Needle,Needle-13 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 70 Cm,3/8 Circle Round Body,Needle-16 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 75 Cm,1/2 Circle Round Body (320 Microns) Double Needle,Needle-13 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 75 Cm,1/2 Circle Round Body Cc-4 Hemo-Seal Multipass Double Needle,Needle-13 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 75 Cm,1/2 Circle Round Body Rb-2 Double Needle,Needle-13 Mm,Size-6-0,Box Of-36 Foil , Polypropylene Blue Monofilament 75 Cm,1/2 Circle Round Body Rb-2 Ethalloy Double Needle,Needle-13 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 75 Cm,1/2 Circle Taper Point Sh-1 Ethalloy Double Needle,Needle-22 Mm,Size-3-0,Box Of-36 Foil , Polypropylene Blue Monofilament 75 Cm,1/2 Circle Taper Point Sh-1 Ethalloy Double Needle,Needle-22 Mm,Size-4-0,Box Of-36 Foil , Polypropylene Blue Monofilament 75 Cm,3/8 Circle Cc-1 (320 Microns) Double Needle,Needle-13 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 75 Cm,3/8 Circle Round Body C-1 (380 Microns) Double Needle,Needle-13 Mm,Size-6-0,Box Of-12 Foil , Polypropylene Blue Monofilament 75 Cm,3/8 Circle Taper Point Bv-1 Ethalloy Double Needle,Needle-9.3 Mm,Size-6-0,Box Of-36 Foil , Polypropylene Blue Monofilament 75 Cm,3/8 Circle Taper Point Bv-1 Ethalloy Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-36 Foil , Polypropylene Blue Monofilament 75 Cm,3/8 Circle Taper Point C-1 Ethalloy Double Needle,Needle-13 Mm,Size-6-0,Box Of-36 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Cc-25 Double Needle,Needle-26 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Double Needle,Needle-16 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Double Needle,Needle-26 Mm,Size-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Mh-1 Double Needle,Needle-31 Mm,Size-2-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Rb-1 Double Needle,Needle-17 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Rb-1 Double Needle,Needle-17 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Rb-1 Ethalloy Double Needle,Needle-17 Mm,Size-5-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Sh Double Needle,Needle-26 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body Sh2 Double Needle,Needle-20 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body,Needle-25 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body,Needle-30 Mm,Size-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Round Body,Needle-30 Mm,Size-2-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Taper Point Sh Ethalloy Double Needle,Needle-26 Mm,Size-4-0,Box Of-36 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut (Heavy),Needle-30 Mm,Size-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut V-5 Double Needle,Needle-17 Mm,Size-2-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut V-5 Double Needle,Needle-17 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut V-5 Double Needle,Needle-17 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut V-7 Double Needle,Needle-26 Mm,Size-3-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut,Needle-17 Mm,Size-4-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circle Tapercut,Needle-25 Mm,Size-2-0,Box Of-12 Foil , Polypropylene Blue Monofilament 90 Cm,1/2 Circletaper Point Sh Ethalloy Double Needle,Needle-26 Mm,Size-3-0,Box Of-36 Foil , Polypropylene Bluemonofilament 90 Cm,1/2 Circle Tapercut V-7 Double Needle,Needle-26 Mm,Size-2-0,Box Of-12 Foil , Polyster, Poly(P-Dioxanone)Irgacare Mp No More Than 2360?G/M Suture Various Strenght And Various Size , Polyurethane Transperent Dressing With Pad Different Size , Portable Mainstream Capnograph , Powder Free Polymer Coated Sterile Gloves, Confirms To En-550, Iso 13485, 9001, 14001,11135,2858-1, Astm D2557, Protein Content Less Than 50Meugram/Dm Square, Length 275 To 285Mm, Size- 6, 6.5, 7, 7.5 , Power Endocutter Reload Used With Endoscopic Linear Cutter, 60Mm Blue,Articulation 60 Degree Both Side And Rotation-360 Degree , Power Endocutter Reload Used With Endoscopic Linear Cutter, 60Mm Green,Articulation 60 Degree Both Side And Rotation-360 Degree , Power Endocutter Reload Used With Endoscopic Linear Cutter, 60Mm White,Articulation 60 Degree Both Side And Rotation-360 Degree , Pre Filled Saline Water:Prefilled Terminally Sterile Single Use Device For Flushing Of Catheter With 0.9% Saline Solution Having Standard 10Ml Syringe Diameter With Design To Minimize Syringe Induced Reflux. Should Be Latex & Pvc Free. The Saline Should Be Preservative Free. Size: 3Ml , Pre Filled Saline Water:Prefilled Terminally Sterile Single Use Device For Flushing Of Catheter With 0.9% Saline Solution Having Standard 10Ml Syringe Diameter With Design To Minimize Syringe Induced Reflux. Should Be Latex & Pvc Free. The Saline Should Be Preservative Free. Size: 5Ml , Pre Filled Saline Water:Prefilled Terminally Sterile Single Use Device For Flushing Of Catheter With 0.9% Saline Solution Having Standard 10Ml Syringe Diameter With Design To Minimize Syringe Induced Reflux. Should Be Latex & Pvc Free. The Saline Should Be Preservative Free. Size: 10Ml , Precision Controller With Extension Set O Flow Regulator With Extension Set For Precise Flow Control. ; O Ensures Safe Application In Demanding Critical Care Settings. ; O Reliable Flow Rate Accuracy Across The Full Adjustable Scale. ; O Ergonomic Dial Design With Ridges For Easy Grip And Adjustment. ; O Precise Flow Rate Control Of Iv Fluids With Range Of 5Ml/Hr To 250 Ml/Hr. ; O Double Scale For 10% And 40% Solution Strengths. ; O Dehp Free Soft And Kink Resistant Pvc Tubing. ; O Male Luer Connector At One End And Female Luer Connector At Other End. ; O Provided With A Latex FreeY Type Injection Port Made Up Of Silicone For Intermittent Medication. ; O Can Be Used With All Standard I.V Sets Using Luer Lock Connections. ; O Sterile And Individually Blister Packed. , Precision Infusion Set O Dehp Free I.V Set With Dial Flow Controller Specially Designed For Controlling The Flow Rates Of Fluid. ; O Eliminates The Need Of Expensive Electronic I.V. Pumps. ; O Provided With Soft And Kink Resitant Clear Pvc Tubing For Uniterrupted Flow. ; O Gentle Gravity Drive Is Self-Correcting. ; O Wide Dial Operates As Thumb Wheel Like Roller Clamp. ; O Security Door Prevents The Accidental Change Of Flow Rate. ; O Low Cost Disposable Set Provides Maximum Safety, Traditional Grip, Reliable Flow Control, And Ergonomic Shape. ; O Provided With Specialised Y Type Injection Port Made Up Of Silicone For Additional Medication. ; O Sterile, Individually Packed. , Pre-Filled Saline Water For Catheter Flushing, Preservative Free And Non-Pyrogenic Ce Certified. Latex& Pvc Free. 10Ml , Pre-Filled Saline Water For Catheter Flushing, Preservative Free And Non-Pyrogenic Ce Certified. Latex& Pvc Free. 3Ml , Pre-Filled Saline Water For Catheter Flushing, Preservative Free And Non-Pyrogenic Ce Certified. Latex& Pvc Free. 5Ml , Pressure Extension Linelow Pressure Large Bore Extension Line Made Up Of Pvc. ; O Used Primarily To Connect The Transducer System To The Indwelling Catheter. ; O Male Luer Lock At One End And 3-Way Stop Cock At Other Enabling The User To Run Two Lines Simultaneously. ; O Three Way Stop Cock May Be Used For Blood Sampling Or Extra Medication. ; O Can Sustain A Pressure Upto 7 Kg/ Cm² Or 100 Psi. ; O Sterile, Individually Packed In Blister Pack. , Pressure Extension Line Small Bore High Pressure Extension Line. ; O Made Of Clear, Non-Toxic Medical Grade Pvc Material. ; O Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient. ; O Multi-Purpose Extension Line Provided With Male Luerlock At One End And Female Luer Lock At Other End And Fits All Standard Equipment. ; O Luer Lock Connectors Provide Secure Fitting. ; O Can Sustain A Pressure Upto 10 Kg/ Cm² Or 140 Psi. ; O Sterile, Individually Packed In Blister Pack , Pressure Infusion Bag Heavy Duty Pressure Cuff Specially Designed For Quick Infusion/ Fluid Container Setup And Replacement. ; O Robust Pressure Cuff Facilitates Fast Fluid Transfer Suitable To Patients Indication And Paramedics Satisfaction. ; O Clear Material Enhances Visibility Of The Fluid Transfer/Flow. ; O Suitable For Pressure Up To 400Mm Of Hg. ; O Instant Venting Through The 3-Way Stop Cock Enables Quick Deflation Of The Pressure Cuff. ; O Clear, Precise Pressure Gauge Facilitates Rapid And Reliable Pressure Control. ; O Easy To Use, Hook-And-Loop Fastener Enables Easy Replacement Of Infusion Bag Without Removal Of Pressure Cuff From Drip Stand. ; O Squeeze Bulb Provided Is Supple And Easy To Operate For Fast Inflation. ; O Sterile And Individually Packed. 1000Ml , Pressure Infusion Bago Heavy Duty Pressure Cuff Specially Designed For Quick Infusion/ Fluid Container Setup And Replacement. ; O Robust Pressure Cuff Facilitates Fast Fluid Transfer Suitable To Patients Indication And Paramedics Satisfaction. ; O Clear Material Enhances Visibility Of The Fluid Transfer/Flow. ; O Suitable For Pressure Up To 400Mm Of Hg. ; O Instant Venting Through The 3-Way Stop Cock Enables Quick Deflation Of The Pressure Cuff. ; O Clear, Precise Pressure Gauge Facilitates Rapid And Reliable Pressure Control. ; O Easy To Use, Hook-And-Loop Fastener Enables Easy Replacement Of Infusion Bag Without Removal Of Pressure Cuff From Drip Stand. ; O Squeeze Bulb Provided Is Supple And Easy To Operate For Fast Inflation. ; O Sterile And Individually Packed. 500Ml , Prolene Blue60 Cm,3/8 Circle, Tp, Bv-1 Everpoint, Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-36 Foils, , Prolene Blue 2 X 75 Cm,3/8 Circle, Tp, Bv 175-6, Everpoint, Double Needle,Needle-8 Mm,Size-7-0,Box Of-12 Foils, , Prolene Blue 60 Cm,3/8 Circle, Bv 175-8, Cc Point, Everpoint, Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, C-1 , Everpoint, Double Needle,Needle-13 Mm,Size-6-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, Tp, Bv 130-5, Everpoint, Double Needle,Needle-6.5 Mm,Size-8-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, Tp, Bv 175-6, Everpoint, Double Needle,Needle-8 Mm,Size-7-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, Tp, Bv 175-6, Everpoint, Double Needle,Needle-8 Mm,Size-8-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, Tp, Bv 175-6, Everpoint, Double Needle,Needle-9.3 Mm,Size-6-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, Tp, Bv 175-8, Everpoint, Double Needle,Needle-9.3 Mm,Size-7-0,Box Of-36 Foils, , Prolene Blue 60 Cm,3/8 Circle, Tp, C-V Everpoint, Double Needle,Needle-13 Mm,Size-6-0,Box Of-36 Foils, , Proven Bactericidal Powder Hemostate 3Rm , Pulse Oxymeter , Pvc Appron , Pvc Laryngeal Mask Airway ( Lma) Size 1.0,1.5,2.0,2.5,3.0,4.0,5.0 , R.A.E Tube North Pole -4 , R.A.E Tube North Pole -4.5 , R.A.E Tube North Pole -5 , R.A.E Tube North Pole -5.5 , R.A.E Tube North Pole -6 , R.A.E Tube North Pole -6.5 , R.A.E Tube North Pole -7 , R.A.E Tube North Pole -7.5 , R.A.E Tube North Pole -8 , R.A.E Tube North Pole -8.5 , R.A.E Tube South Pole -4 , R.A.E Tube South Pole -4.5 , R.A.E Tube South Pole -5 , R.A.E Tube South Pole -5.5 , R.A.E Tube South Pole -6 , R.A.E Tube South Pole -6.5 , R.A.E Tube South Pole -7 , R.A.E Tube South Pole -7.5 , R.A.E Tube South Pole -8 , R.A.E Tube South Pole -8.5 , Raney Reusable Scalp Clip Applying Forceps , Raney Scalp Clip- Disposable & Plastic. ( 10 Clips Per Package & 20 Packages Per Case) Compatable With 205115 Raney Clip Applying Forcep) , Rebreathing Bag ( 1 Ltr/ 2Ltr) , Recorder Printer Paper For Zoll Defibillator , Redial Cannula , Reinforced Laryngeal Mask Disposable Reinforced Laryngeal Mask Having Kink Free Wire Reinforced In Flexible Tube To Eliminate The Risk Of Airway Tube Occlusion. ; O Should Have Depth Marks For Visual Control Of Correct Positioning Of The Mask. ; O Should Have Integrated Pilot Tube For Easy Handling And Insertion. ; O Availability Of Sizes From 2,2.5,3,4,5,6; O Should Be Made Up Of Phthalate Free Material; O With Iso And Ce Marks Confirming To International Standards Of Safety , Resuscitators - Adult Double Layered Resuscitator Bag Adult With Face Mask Of Size Deliver A Max. Tidal Volume Of Approximate 1300 Ml ; Volume Of O2 Reservoir Should Be Approx. 1500 Ml ; Outer Cover Of Bag Should Be 100% Latex Free. Should Be Provides Built-In- Pressure Limitation For Patient Safety. Should Be Unique Single Shutter Valve System For Reliable Functionality. Should Be Integrated With Hand Strap Which Ensures A Good Grip, Which Helps To Reduce Fatigue During Manual Ventilation. Should Be Autoclavable At 134 C°, Including The Closed Reservoir Bag. There Should Be Provision To Attach Peep Valve.Expiratory Connector Should Be 30 Mm. Should Be C€ Approved.In Paediatric Age Group Should Be Pressure-Limiting Valve With Override Cap To Release Any Extra Pressure. There Should Be Provision To Attach Pressure Manometer. ; With Iso And Ce Marks Confirming To International Standards Of Safety , Resuscitators - Paediatric/Neonate Double Layered Resuscitator Bag Adult With Face Mask Of Size Deliver A Max. Tidal Volume Of Approximate 300 Ml; Volume Of O2 Reservoir Should Be Approx. 1500 Ml/Volume Of Oxygen Reservoir Tube Should Be 100 Ml; Outer Cover Of Bag Should Be 100% Latex Free. Should Be Provides Built-In- Pressure Limitation For Patient Safety. Should Be Unique Single Shutter Valve System For Reliable Functionality. Should Be Integrated With Hand Strap Which Ensures A Good Grip, Which Helps To Reduce Fatigue During Manual Ventilation. Should Be Autoclavable At 134 C°, Including The Closed Reservoir Bag. There Should Be Provision To Attach Peep Valve.Expiratory Connector Should Be 30 Mm. Should Be C€ Approved.In Paediatric Age Group Should Be Pressure-Limiting Valve With Override Cap To Release Any Extra Pressure. There Should Be Provision To Attach Pressure Manometer. ; With Iso And Ce Marks Confirming To International Standards Of Safety , Reusable Bougie (Imported, For Et Tube Intubation) , Reusable Transparent Face Mask Transparent Facemasks (Silicon) Having Inflating Cuff For Better Air Seal. ; Fully Autoclavable, Size 0 For Anaesthesia And ; Resuscitation. With Iso And Ce Marks Confirming To International Standards Of Safety , Reuse Prevention Syringesterile Single Use Reuse Prevention Syringe With Detachable Needles Compliant To Iso 7886:4 Type Iand Type B , Flow Wrap Package Using Medical Grade Breathable Paper, Eto Sterilized Conforming To Iso 10993-7, Stopper Made Of Non-Latex Preferred Material Thermoplastic Elastomer (Tpe) , Riboflavin And Dextran Sterile Solution , Right Lens (Pc Iol ) +17D To +26D , Round Shape Band-Aid , Rt380adult Ventilator Circuit Dual Heated + Rt019 Filter + Mr290 Chamber (Box 10) Dual Heated , Rubber Sheet , Saline Set Vented With Filter, Luer Lock & Y Injection Port , Section Catheter , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 6X8 Cm , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X10 Cm , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 10X15 Cm , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 10X20 Cm , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 10X25 Cm , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 10X30 Cm , Self- Adhesive 4 Layered Absorbent Surgical Dressing With Soft Silicone Safetec Adhesive Wound Contact Layer Designed For Exuding Wounds With Wound Pad Absorption Layer Made Up Of Polyacrylate Fibres & Polyester Fibres, Wound Pad Comes With Flex Cut Techonology, Wound Pad Acquisition & Spreading Layer Made Up Of Polyethylene/Polypropylene Fibres And With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 10X35 Cm , Self Adhesive Polyacrylate Porous Non-Woven Cloth Fixation Dressings For Swabs, Catheters And Tubes, With Backing Material Made Up Of Hydrophobic Polyester And Protective Release Liner Made Up Of Siliconised Paper. Size- 10X1000 Cm , Self Adhesive Polyacrylate Porous Non-Woven Cloth Fixation Dressings For Swabs, Catheters And Tubes, With Backing Material Made Up Of Hydrophobic Polyester And Protective Release Liner Made Up Of Siliconised Paper. Size- 15X1000 Cm , Self Adhesive Polyacrylate Porous Non-Woven Cloth Fixation Dressings For Swabs, Catheters And Tubes, With Backing Material Made Up Of Hydrophobic Polyester And Protective Release Liner Made Up Of Siliconised Paper. Size- 5X1000 Cm , Self Adhesive Sterile Absorbent Dressing With Borders Made Up Of Polyacrylate Adhesive, With Viscose Non-Woven Wound Pad As Absorption Layer And With Polyester Nonwoven Backing Material. A Protective Release Liner Made Up Of Siliconised Paper. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X10 Cm , Self Adhesive Sterile Absorbent Dressing With Borders Made Up Of Polyacrylate Adhesive, With Viscose Non-Woven Wound Pad As Absorption Layer And With Polyester Nonwoven Backing Material. A Protective Release Liner Made Up Of Siliconised Paper. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X15 Cm , Self Adhesive Sterile Absorbent Dressing With Borders Made Up Of Polyacrylate Adhesive, With Viscose Non-Woven Wound Pad As Absorption Layer And With Polyester Nonwoven Backing Material. A Protective Release Liner Made Up Of Siliconised Paper. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X20 Cm , Self Adhesive Sterile Absorbent Dressing With Borders Made Up Of Polyacrylate Adhesive, With Viscose Non-Woven Wound Pad As Absorption Layer And With Polyester Nonwoven Backing Material. A Protective Release Liner Made Up Of Siliconised Paper. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X25 Cm , Self Adhesive Sterile Absorbent Dressing With Borders Made Up Of Polyacrylate Adhesive, With Viscose Non-Woven Wound Pad As Absorption Layer And With Polyester Nonwoven Backing Material. A Protective Release Liner Made Up Of Siliconised Paper. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X30 Cm , Self Adhesive Sterile Absorbent Dressing With Borders Made Up Of Polyacrylate Adhesive, With Viscose Non-Woven Wound Pad As Absorption Layer And With Polyester Nonwoven Backing Material. A Protective Release Liner Made Up Of Siliconised Paper. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 9X35 Cm , Self Seal Sterilization Pouch Transparent / White Sterilization Compatibility Gas Plasma; Included Chemical Indicators Eliminate The Need To Place Separate Indicators Within The Pouch, Saving Valuable Packaging Time Includes A Convenient Thumb Notch For Easy Opening The Triple-Sealed Design Provides Three Independent Barriers To Contamination ; Size: 4 X 14In , Self Seal Sterilization Pouch Transparent / White Sterilization Compatibility Gas Plasma; Included Chemical Indicators Eliminate The Need To Place Separate Indicators Within The Pouch, Saving Valuable Packaging Time Includes A Convenient Thumb Notch For Easy Opening The Triple-Sealed Design Provides Three Independent Barriers To Contamination ; Size: 10 X 19In , Self Seal Sterilization Pouch Transparent / White Sterilization Compatibility Gas Plasma; Included Chemical Indicators Eliminate The Need To Place Separate Indicators Within The Pouch, Saving Valuable Packaging Time Includes A Convenient Thumb Notch For Easy Opening The Triple-Sealed Design Provides Three Independent Barriers To Contamination ; Size: 8 X 16In , Self Seal Sterilization Pouch Transparent / White Sterilization Compatibility Gas Plasma Included Chemical Indicators Eliminate The Need To Place Separate Indicators Within The Pouch, Saving Valuable Packaging Time Includes A Convenient Thumb Notch For Easy Opening The Triple-Sealed Design Provides Three Independent Barriers To Contamination Size: 12.5 X 22In , Sensor Disposable For Brain Function Monitoring (25/Box) , Sensor Disposable For Continuous Hemoglobin, Ori, Pvi, Spo2, Pi (10/Box) , Sensor Disposable For Regional Oximetery (20/Box) , Side Port , Side Port Blade , Silicon Face Mask 0 To 4 Disposable , Silicon Gel Tape - For Paediatric , Silicon Laryngeal Mask Airway No 1.0,1.5,2.0 , Silicon Laryngeal Mask Airway No 2.5,3.0,4.0,5.0 , Silicon Male Extractor Catheter - Diff. Sizes. , Silicon Rubber Tubing 6Mm , Silicon Rubber Tubing 8Mm , Silicon Suprapubic Cystostomy Catheter - Sizes 16/18/20/22 , Silicone External Catheter O 100% Silicone External Catheter. ; O Soft Silicone Catheter Is Designed To Be Non-Irritating, Non-Reactive And For Soft And Gentle Feel. ; O Ergonomically Shaped And Easily Rolls Over The Penis. ; O Highly Safe And Free From Any Kind Of Allergic Reactions. ; O Transparent Material Allows Better Skin Health Monitoring While The Catheter Is In Place. ; O Provided With Soft Adhesive Strip For Proper Fixation To Penis Shaft. ; O Skin-Friendly Adhesive Helps To Maximize Wear Time And Also Prevents Accidental Detachment. ; O Gentle Adhesive Keeps The Catheter In Place Yet Allows For Easy Removal. ; O Proximal End Is Designed For Safe And Easy Connection To Urine Bag/ Leg Bag. ; O Individually Packed In Peelable Soft Blister Pack. ; O Sterile, Ready For Use. Size: Small/Medium/Large/Extra Large , Silicone Foleys Catheter- Adult100% Silicone Material Foley Catheter. ; O Inert Silicone Material Reduces Irritation For Optimal Patient Comfort For Long Term Use And Enhanced Safety. ; O Remarkably Smooth, Non-Stick Surface Of Silicone Catheter Makes It Highly ; Resistant To Encrustation. ; O Smooth Tapered Tip Of Catheter Facilitates Easy Introduction Into The Urethra. ; O Clear Material Enables Visualization Of Drained Urine. ; O Distal Eyes Are Super Smooth And Proportional To Provide Atraumatic Insertion And Are Accurately Formed To Permit Effective Drainage. ; O Hard Non Return Valve Ensures Easy Inflation And Deflation Of Balloon. ; O Symmetrical Balloon Facilitates Proper Bladder Retention. ; O Colour Coded Valve For Easy Size Identification. ; O Sterile, Individually Packed And Ready For Use. Size: 12Fg To 24 Fg , Silicone Foleys Catheter- Pediatric 100% Silicone Material Foley Catheter. ; O Inert Silicone Material Reduces Irritation For Optimal Patient Comfort For Long Term Use And Enhanced Safety. ; O Remarkably Smooth, Non-Stick Surface Of Silicone Catheter Makes It Highly ; Resistant To Encrustation. ; O Smooth Tapered Tip Of Catheter Facilitates Easy Introduction Into The Urethra. ; O Clear Material Enables Visualization Of Drained Urine. ; O Distal Eyes Are Super Smooth And Proportional To Provide Atraumatic Insertion And Are Accurately Formed To Permit Effective Drainage. ; O Hard Non Return Valve Ensures Easy Inflation And Deflation Of Balloon. ; O Symmetrical Balloon Facilitates Proper Bladder Retention. ; O Colour Coded Valve For Easy Size Identification. ; O Sterile, Individually Packed And Ready For Use. Size: 6Fg. 8Fg & 10 Fg , Sims Speculum , Single Use Tips. (8.5 Total Length And 3.5 Working Length (Isocl Lpt 8.5L 3.5Wl .25Mm Ea) , Sirolimus Eluting Bioresorbable Vascular Scaffold System With 100 Micron Strut Thickness , Size: Plain, 15Cm Macro Bore Bi - Ext Set , Size: Plain, 15Cm Macro Bore Ext Set , Size: Plain, 15Cm Macro Bore Tri - Ext Set , Skin Electrode , Skin Grafting Blades , Skin Marker Pen , Skin Marker Pen Skin Marker Pen( Thick Point Marking) Sterile Packed In Peel Open Pouches With A Flexible Scale. , Sodium Hyaluronate Ophthalmic Soulution 1.4%W/V , Sodium Hyaluronate Ophthalmic Soulution 1.8%W/V , Sp02 Probe Adult , Sp02 Probe With Extension Cable , Spinal Needle : O Spinal Needle With Key/Slot Arrangement Of Stylet And Cannula ; O Unique Translucent Window Hub Featuring Contact Clarity ; O Fitted Stylet , Spo2 Probe Peadiatric , Sponge Holding Forcep , Ss Wire Asorted Thickness , Staining Trough , Sterile Adedive Towel (Eye Drape) 70Cm X 70Cm , Sterile Adedive Towel (Eye Drape) 90Cm X 90Cm , Sterile Adhesive Towel (Eye Draps) 90Cmx90cm , Sterile Ophthalmic Irrigation Solution (Bss , Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliant To Iso 7886:4 Type Iand Type B , Flow Wrap Package Using Medical Grade Breathable Paper, Eto Sterilized Conforming To Iso 10993-7, Stopper Made Of Non-Latex Preferred Material Thermoplastic Elastomer (Tpe) 2Ml With Needle , Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliant To Iso 7886:4 Type Iand Type B , Flow Wrap Package Using Medical Grade Breathable Paper, Eto Sterilized Conforming To Iso 10993-7, Stopper Made Of Non-Latex Preferred Material Thermoplastic Elastomer (Tpe) 3Ml With Needle , Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliant To Iso 7886:4 Type Iand Type B , Flow Wrap Package Using Medical Grade Breathable Paper, Eto Sterilized Conforming To Iso 10993-7, Stopper Made Of Non-Latex Preferred Material Thermoplastic Elastomer (Tpe) 5Ml With Needle , Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliant To Iso 7886:4 Type Iand Type B , Flow Wrap Package Using Medical Grade Breathable Paper, Eto Sterilized Conforming To Iso 10993-7, Stopper Made Of Non-Latex Preferred Material Thermoplastic Elastomer (Tpe) 10Ml With Needle , Sterile Surgical Pad/Combine Dressing (Absorbent Cotton Pad With Non Woven Fabric)Size -10Cm X 20Cm , Sterile Surgical Pad/Combine Dressing (Absorbent Cotton Pad With Non Woven Fabric)Size -10Cmx10cm , Sternal Closure Device Applicator With Cutter. , Stone Basket Different Sizes , Suction Cannula (S/S) With Thumb Tip , Suction Catheter Oro-Bronchial Catheter To Remove Respiratory Secretions From A Persons Airway To Keep It Clear And Prevent Mucus Build-Up. ; O Suitable For Removal Of Secretions From Mouth, Trachea ; And Bronchial Tubes. ; O Made From Non-Toxic, Kink-Resistant Medical Grade Pvc. ; O Provided With Universal Funnel Shaped Connector For Safe Connection To The Standard Suction Equipment. ; O Atraumatic, Soft-Rounded Distal End Is Open With One Lateral Eye To Avoid Trauma During Suctioning. ; O Soft And Smooth Tubing Specially Made Using Frozen Surface Technique For Easy Insertion. ; O Color Coded Funnel End For Instant Size Identification. ; O Sterile, Peelable Soft Blister Pack ; O Size: 6,8,10,12,14,16,18 Fr , Suction Nosal , Supra Glotic Airway , Supra Glotic Endotracheal Tube With Cuff , Supra Pubic Drainage System Suprapubic Drainage Catheter. ; O Designed For Cystostomy And Supra-Pubic Drainage. ; O Manufactured From 100% Silicone. ; O Super Smooth Catheter Material Ensures Atraumatic Intubation. ; O Low Risk Of Encrustation Helps Maintain A High Level Of Drainage Performance Even When The Catheter Is Inserted For A Longer Duration. ; O Symmetrical Inflated Balloon Facilitates Self-Retention. ; O Catheter Provided With A Radio-Opaque Line Throughout Its Length For X-Ray Visualization. ; O Distally Located Lateral Eye Enables Efficient Drainage. ; O Sterile, Individually Packed In A Box. Size: 16Fg/18Fg/20Fg/22Fg , Surgical Scissors , Suturing Needle (Cuttingall Sizes 4,5,6,7,8,9,10) , Suturing Needle (Round Body All Sizes 4,5,6,7,8,9,10) , Synthetic Biodegradable Temporizing Tri-Layered, 2Mm Thick (10X10cm),Foam Matrix Of Biodegradable (Pu) Polyurethane. No Animal Proteins/Polymer Crosslinking, Inert In Infection, Not A Food Source For Bacteria. Usfda, Ec, Dcgi Approved. Easy To Apply With Sutures Or Staples. , Synthetic Biodegradable Temporizing Tri-Layered, 2Mm Thick (10X20cm),Foam Matrix Of Biodegradable (Pu) Polyurethane. No Animal Proteins/Polymer Crosslinking, Inert In Infection, Not A Food Source For Bacteria. Usfda, Ec, Dcgi Approved .Easy To Apply With Sutures Or Staples. , Synthetic Biodegradable Temporizing Tri-Layered, 2Mm Thick (20X40cm),Foam Matrix Of Biodegradable (Pu) Polyurethane. No Animal Proteins/Polymer Crosslinking, Inert In Infection, Not A Food Source For Bacteria. Usfda, Ec, Dcgi Approved. Easy To Apply With Sutures Or Staples. , Synthetic Biodegradable Temporizing Tri-Layered, 2Mm Thick (5X5cm),Foam Matrix Of Biodegradable (Pu) Polyurethane. No Animal Proteins/Polymer Crosslinking, Inert In Infection, Not A Food Source For Bacteria. Usfda, Ec, Dcgi Approved. Easy To Apply With Sutures Or Staples , Synthetic Powder Free Non-Latex Gloves, Length 280-300Mm, Gamma Sterilized,Confirms To En455-1-2000, En455-2:2015, En455-3-2015, Iso 10282:2014 & Astm D 3577:2009, Ce Mark-Mdd Class Iia/Ppe Cat.Iii All Sizes , Syringe - 2Ml ,3Ml ,5Ml, 10 Ml , T.M Paper , T-Connector , Tegaderm All Size , Temperature Monitoring And Gastric Suction Lumen 24F,32F,25 , Terumo Hydrophilic Glide Guide Wire 0.032 , Thermal Printer Paper , Thermameter , Thermovent , Thin Perforated& Transparent Film, With Wound Contact Layer Made Up Of Soft-Silicone, With Transferring Layer Made Up Of Polyurethane Film And Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 14 Days. Size- 5X7.5 Cm , Thin Perforated& Transparent Film, With Wound Contact Layer Made Up Of Soft-Silicone, With Transferring Layer Made Up Of Polyurethane Film And Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 14 Days. Size- 7.5X10 Cm , Thin Perforated& Transparent Film, With Wound Contact Layer Made Up Of Soft-Silicone, With Transferring Layer Made Up Of Polyurethane Film And Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 14 Days. Size- 10X18 Cm , Thoraci Catheter With Trocar O Designed For Quick Non-Operative Pleural And Chest Drainage. ; O Specialised Catheter Is Provided With Trocar For Easy Penetration, Placement And Handling. ; O Flat Handle Facilitates Easy Maneuverability. ; O Large Smooth Drainage Eyes For Efficient Drainage. ; O Markings Provided At 5, 10, 15 And 20 Cm From The Distal Tip To Help Ascertain The Depth Of Penetration. ; O Proximal End Is Fitted With An Universal Tapered Connector For Easy Connection ; To The Drainage Bottle. ; O Sterile, Individually Double Packed In A Peelable Pouch. Size: 12Fg/16Fg/20Fg/24Fg/28Fg/32Fg , Thoraci Drainage Cathetero Specially Designed 100% Silicone Material Thoracic Drainage Catheter. ; O Completely Non-Reactive, Inert, Extra Soft, Smooth ; Catheter Ideal For Inter-Coastal Drainage. ; O Extremely Gentle To The Body Tissues. ; O Bio-Compatible Silicone Catheter Ensures High Patient Safety And Comfort. ; O Sterile, Double Packed In Peelable Pouch Pack., Size: 16Fg/20Fg/24Fg/28Fg/32Fg , Thorasic Drainage Catheter- Diff. Size , Thorasic Drainage Catheter With Trocar - Diff. Size , Thread Cotton Thread No- 2.0 Black , Three Layered Thin Highly Absorbent Foam Dressing With Self Adherent Borders And With Soft-Silicone Wound Contact Layer, With Wound Pad Absorption And Spreading Layer Made Up Of Viscose Non-Woven Polyester Fibres, With Wound Pad Acquisition Layer Made Up Of Polyurethane Foam, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 4X5 Cm , Three Layered Thin Highly Absorbent Foam Dressing With Self Adherent Borders And With Soft-Silicone Wound Contact Layer, With Wound Pad Absorption And Spreading Layer Made Up Of Viscose Non-Woven Polyester Fibres, With Wound Pad Acquisition Layer Made Up Of Polyurethane Foam, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 5X12.5 Cm , Three Layered Thin Highly Absorbent Foam Dressing With Self Adherent Borders And With Soft-Silicone Wound Contact Layer, With Wound Pad Absorption And Spreading Layer Made Up Of Viscose Non-Woven Polyester Fibres, With Wound Pad Acquisition Layer Made Up Of Polyurethane Foam, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 7.5X7.5 Cm , Three Layered Thin Highly Absorbent Foam Dressing With Self Adherent Borders And With Soft-Silicone Wound Contact Layer, With Wound Pad Absorption And Spreading Layer Made Up Of Viscose Non-Woven Polyester Fibres, With Wound Pad Acquisition Layer Made Up Of Polyurethane Foam, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 10X10 Cm , Three Layered Thin Highly Absorbent Foam Dressing With Self Adherent Borders And With Soft-Silicone Wound Contact Layer, With Wound Pad Absorption And Spreading Layer Made Up Of Viscose Non-Woven Polyester Fibres, With Wound Pad Acquisition Layer Made Up Of Polyurethane Foam, With Polyurethane Backing Film As Water, Bacterial And Viral Barrier. A Protective Release Liner Made Up Of Polyethylene Film. Product Should Be Ce Certified. Usage- Upto 7 Days. Size- 15X15 Cm , Three Way Stop Cock Through-Hole Stop Cock Made Of Polycarbonate & Polyethylene Biomaterial, Should Withstand A Pressure Of 40 Psi, Packing Should Be In Tyvek Paper. Size: 10Cm , Three Way Stop Cock Through-Hole Stop Cock Made Of Polycarbonate & Polyethylene Biomaterial, Should Withstand A Pressure Of 40 Psi, Packing Should Be In Tyvek Paper. Size: 100Cm , Through-Hole Stop Cock Made Of Polycarbonate & Polyethylene Biomaterial, Should Withstand A Pressure Of 40 Psi, Packing Should Be In Tyvek Paper.;; Sizes : Plain, 10Cm Extension & 100Cm Extension. , Tinanium Clip Engulfs Tissue Tip To Tip Closure,Blue Small 6Clips,20Cartrides,Size 100 , Tinanium Clip Engulfs Tissue Tip To Tip Closure,Green Medium-Large 6Clips,20Cartrides,Size 300 , Tinanium Clip Engulfs Tissue Tip To Tip Closure,White Medium 6Clips,20Cartrides,Size 200 , Tinanium Clip Engulfs Tissue Tip To Tip Closure,Yellow Large 6Clips, 20Cartrides,Size 400 , Tissue Separating Dual Layer Mesh With Plcl Barrier-15*15 Square , Tissue Separating Dual Layer Mesh With Plcl Barrier-15*20 Oval , Tissue Separating Dual Layer Mesh With Plcl Barrier-20*25 Oval , Tmt Paper , Tooth Forcep , Top Syringe For Blasdder Wash , Tracheal Culture Testing Bottle. , Tracheastomy Kit C Dett All Size , Tracheostomy Tube (Cuffed) Adult , Tracheostomy Tube (Cuffed) Paediatic , Tracheostomy Tube (Plain) All Size , Tracheostomy Tube With Subglotic Suction (Adult & Paediatic) , Trans Urethral Resection Set O Y- Shaped Set For Endoscopic Irrigation During Turp Procedure (Trans Uretheral Resection Of Prostate Gland). ; O Manufactured From Non-Toxic And Non-Irritant Medical Grade Pvc. ; O Provided With Thumb Operated Clamps That Help In Quick And Smooth Changeover Of Bottles. ; O Proximal End Is Equipped With Flexible Latex Tubing For Easy Connection To ; The Endoscope. ; O Sterile, Ready For Use. ; O Individually Packed In Peelable Pouch Pack. , Transducer Protector , Transducer Set , Transparent Iv Dressing O Transparent Pu Drape Which Provides Visibility Of Skin Around Cannula. ; O High Permeability Of The Pu Film Prevents Moisture Build Up, Responsible For Bacterial Growth And Thereby Reduces The Risk Of Infection. ; O Adequate Adhesion To The Skin Due To Hypoallergenic Adhesive Quality. ; O Flexible And Gentle On The Skin. ; O The Film Ensures Excellent Cannula Stability. ; O Keeps The Cannula Site Secure, Clean, Tidy And Prevents Any Infection. ; O Convenient And Timely Visual Inspection Because Of Transparent Film. ; O Provided With A Patient Identification Sticker. ; O Easy To Peel Off After Use. ; O Sterile, Individually Packed. , Transparent Strele Dressing 6X7 Tegadram , Treachea Tee Plus (T-Piece With 2 Mtr Oxygen Tube) , Triclosan Coated Polyglactin 910 35 Cm,1/2 Circle Reverse Cutting (Heavy)Portt,Needle-23 Mm,Size-1,Box Of-12 Foils , Triclosan Coated Polyglactin 910 45 Cm,1/2 Circle Reverse Cutting Os-8,Needle-40 Mm,Size-2,Box Of-24 Foils , Triclosan Coated Polyglactin 910 45 Cm,3/8 Circle Cutting,Needle-22 Mm,Size-3-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 45 Cm,5/8 Circle Cutting,Needle-16 Mm,Size-4-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 70 Cm,1/2 Circle Reverse Cutting (Heavy) Portt,Needle-23 Mm,Size-1,Box Of-12 Foils , Triclosan Coated Polyglactin 910 70 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-3-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 70 Cm,1/2 Circle Round Body,Needle-30 Mm,Size-2-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 70 Cm,3/8 Circle Cutting Ps-1 Prime Multi Pass Ethalloy,Needle-24 Mm,Size-3-0,Box Of-36 Foils , Triclosan Coated Polyglactin 910 70 Cm,3/8 Circle Reverse Cutting Ps-1,Needle-24 Mm,Size-3-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Cutting,Needle-22 Mm,Size-3-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Reverse Cutting Os,Needle-36 Mm,Size-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Reverse Cutting Os,Needle-40 Mm,Size-2,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Reverse Cutting,Needle-40 Mm,Size-2-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Round Body Gs,Needle-40 Mm,Size-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Round Body Gs,Needle-40 Mm,Size-2-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Round Body,Needle-30 Mm,Size-2-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Round Body,Needle-40 Mm,Size-2-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Tapercut V-34 Ob,Needle-36 Mm,Size-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Tapercut V-37 Ob,Needle-40 Mm,Size-1,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,1/2 Circle Tapercut,Needle-36 Mm,Size-3-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,3/8 Circle Cutting Ethiprime,Needle-25 Mm,Size-3-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910 90 Cm,3/8 Circle Cutting,Needle-26 Mm,Size-2-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910Antibacterial 70 Cm,1/2 Circle Round Body,Needle-20 Mm,Size-4-0,Box Of-12 Foils , Triclosan Coated Polyglactin 910Antibacterial 90 Cm,1/2 Circle Round Body,Needle-40 Mm,Size-1,Box Of-12 Foils , Triclosen/Pgl 910 Ct Braided Undyed Suture Various Strenght And Varous Size , Triple Layered Antimicrobial Foam Dressing With Silver Sulphate, Silver Content 1.2Mg/Cm2 With Active Relaease Of Silver Upto 7 Days With Soft Silicon Saftac Wound Contact Layer For Atraumatic Dressing Change. Product Should Be Ce/ Usfda Certified Size 20X20 Cm , Triple Layered Antimicrobial Foam Dressing With Silver Sulphate, Silver Content 1.2Mg/Cm2 With Active Relaease Of Silver Upto 7 Days With Soft Silicon Saftac Wound Contact Layer For Atraumatic Dressing Change. Product Should Be Ce/ Usfda Certified Size 20X50 Cm , Tripple Lumen Catheter,Std , Trypan Blue Sterile Solution Rhex- Id 1Ml(0.8Mg Intra Ocular Solution) , Tube Set Non Filtered Patient Circuit(Set Of 10) , Tur Loop Cutting , Tur Set , Twin Bore Nasal Seto Suitable For Easy Application And Efficient Administration Of Oxygen For Greater Comfort Of The Patient. ; O Manufactured From Soft, Light Weight Non-Toxic Material, Thus Non-Irritating Even In Long Term Use. ; O Improved Anatomical Fit For Increased Comfort. ; O The System Of Attachment Provides Maximum Freedom To The Patient And Leaves The Patients Mouth Free For Nutritional And Communication Purposes. ; O Multichannel Tube Ensures Continuous Supply Of Oxygen, Even If The Tube Is Accidentally Kinked. ; O Twin Prong/ Nasal Tips Are Designed To Ensure Equal Volume Of Oxygen To Both The Air Passages. ; O Soft Funnel Shaped Connector Facilitates Easy Connection To Oxygen Source. ; O Nasal Prong Ensures An Uninterrupted Flow Of Oxygen To The Patient And Offers Better Comfort For Continuous Use. ; O Non-Sterile, Individually Packed In Poly Bag. , Tyvek Pouch , Ultra And Solo (Pack Of 10) , Ultra Flux Av600 , Ultra Only (Pack Of 10) Adult , Ultra Only (Pack Of 10) Paediatric , Ultra Starter Kit (Pack Of 10) Adult Mask &Solo , Ultra Starter Kit (Pack Of 10) Paed Mask & Solo , Under Pads , Under Water Seal Drainage Bag , Underwater Seal Drainage Systemo Under Water Seal Drainage System. ; O Specially Designed Drainage Bottle Suitable For Pleural Drainage In Conjunction With Intercoastal Drainage Catheters. ; O Double Chamber And Single Chamber Compact Unit Suitable For All Cardiac And ; Thoracic Procedures. ; O Range Suitable For Management Of Major, Moderate And Minor Drainages. ; O Easy To Read Markings Help Note The Drainage Volume. ; O Clearly Marked Initial Level Ensures Effective Under Water Seal. ; O Write On Facility On The Side Of Scale Helps In Monitoring The Collected Drained Volume Precisely. ; O Suction Port Is Provided For Connection With Suction Unit. ; O Kink Resistant Large Bore Tubing Facilitates Unrestricted Flow. ; O Metallic Hangers For Easy Attachment To Patients Bedside. ; O Sterile, Individually Packed. ; Capacity: 2000Ml , Underwater Seal Drainage Systemunder Water Seal Drainage System. ; O Specially Designed Drainage Bottle Suitable For Pleural Drainage In Conjunction With Intercoastal Drainage Catheters. ; O Double Chamber And Single Chamber Compact Unit Suitable For All Cardiac And ; Thoracic Procedures. ; O Range Suitable For Management Of Major, Moderate And Minor Drainages. ; O Easy To Read Markings Help Note The Drainage Volume. ; O Clearly Marked Initial Level Ensures Effective Under Water Seal. ; O Write On Facility On The Side Of Scale Helps In Monitoring The Collected Drained Volume Precisely. ; O Suction Port Is Provided For Connection With Suction Unit. ; O Kink Resistant Large Bore Tubing Facilitates Unrestricted Flow. ; O Metallic Hangers For Easy Attachment To Patients Bedside. ; O Sterile, Individually Packed. ; Capacity: 1200Ml , Underwater Seal Drainage System Under Water Seal Drainage System. ; O Specially Designed Drainage Bottle Suitable For Pleural Drainage In Conjunction With Intercoastal Drainage Catheters. ; O Double Chamber And Single Chamber Compact Unit Suitable For All Cardiac And ; Thoracic Procedures. ; O Range Suitable For Management Of Major, Moderate And Minor Drainages. ; O Easy To Read Markings Help Note The Drainage Volume. ; O Clearly Marked Initial Level Ensures Effective Under Water Seal. ; O Write On Facility On The Side Of Scale Helps In Monitoring The Collected Drained Volume Precisely. ; O Suction Port Is Provided For Connection With Suction Unit. ; O Kink Resistant Large Bore Tubing Facilitates Unrestricted Flow. ; O Metallic Hangers For Easy Attachment To Patients Bedside. ; O Sterile, Individually Packed. ; Capacity: 500Ml , Universal Extrimity Drape , Uretric Catheter 6Fr , Uretric Catheter Open End +Closed End- Different Sizes. , Urine Bag With Measured Volume Chamber O Graduated Measured Volume Meter For Accurate Measurement Of The Urine Output. ; O Clear And Transparent Measured Volume Chamber Allows Precise Reading. ; O Urine Meter Is Directly Attached To A Two Litre Capacity Urine Bag Having Overflow Facility. ; O Fully Closed Circuit Drainage Eliminates The Risk Of Contamination. ; O Soft And Kink Resistant Pvc Tubing. ; O Universal Tapered Connector Provided Facilitates Secure Connection With The Uretheral Catheter. ; O Foldable Hanger With Tube Holder For Bed Side Hanging. ; O Sterile, Individually Packed , Urine Collection Bag - Without Hanger (For Adult) , Urine Collection Bag - Without Hanger (For Paediatric) , Urometer C Urobag With Cuff , V Cannula Fixatoro Skin Colored, Soft Breathable Fabric, Flexible And Gentle To The Skin. ; O Ergonomically Shaped. ; O Keeps The Cannula Site Secure, Clean, Tidy And Prevents Any Infection. ; O Adequate Adhesion To The Skin Due To Hypoallergenic ; Adhesive Quality. ; O Easy To Peel Free From Skin After Use. ; O Sterile, Individually Packed.I , Vaccum Section Set , Venaus Cannula , Ventilator Circuito Corrugated, Flexible And Lightweight Tubing Made Of High Quality Plastic. ; O Transparent For Easy Monitoring Of Water Build-Up Or Blockages. ; O Circuits Provides A Better Airflow And Are Cost Effective. ; O Standard Connectors For Secure Fitment With High Performance. ; O Sterile, Latex Free And Individually Packed. ; O 22 Mm Cap With 22 Mm Corrugated Tube. ; O 15Mm Male/ 22Mm Male And 15Mm Female Angle Connector With Luer Port. , Ventilator Filter , Ventricular Cannula , Ventricular External Csf Drainage System Contains One Double Chamber Bag, Bag Anchoring Panel,One 30Cm Id 1.5 Od 3.0Mm Ventricular Catheter With Stylet,Connecter, Anchoring Collar, Trocar Catheter And Connecting Tube. Eto Sterilized . , Ventriculo Peritoneal Medium Pressure With Regular Reservoir. , Venturi Mask O Variable Venturi System To Ensure Accurate Or Predicted Concentration Of Oxygen With Single Unit. ; O Often Used For Critically Ill Patients Who Require Administration Of A Specific Concentration Of Oxygen. ; O Made Up Of Medical-Grade Pvc Material, Completely Latex Free. ; O Transparent Air Entrainment Mask With Soft Anatomical Form With Easily Adjustable Elastic Strap. ; O Specially Designed Mask Has Entrainment Ports That Are Adjustable To Allow Regulation Of The Concentration Of Oxygen Administered. ; O Wide, Adjustable Strap For Proper Positioning Of Mask On The Nasal Area. ; O Provided With Rotating Type Connector For Patients Comfort. ; O Unique Spring Loaded Mechanism Locks Prescribed Concentration In Place Ensuring Safety And Correct Oxygen Concentrations. ; O Two Meter Multichannel Tube Provided, Ensures Continuous Flow Of Oxygen. ; O Non-Sterile, Individually Packed In A Polybag. , Venturi Mask With Reservpoir Bag - Adult , Venturi Mask With Reservpoir Bag - Paediatric , Vpmp Shunt , Water Inlet Filter Cat No. M395061 , Water Seal Deainage System , Water Seal Drainage System , Waterproof Wound Dressing With Non-Adherent Absorbent Pad, Transparent P.U. Film Dressing With Hypoallergenic Adhesive, Non Woven Absorbent Pad, Silicon Paper Release Liner, Size-10Cm X 10Cm , Waterproof Wound Dressing With Non-Adherent Absorbent Pad, Transparent P.U. Film Dressing With Hypoallergenic Adhesive, Non Woven Absorbent Pad, Silicon Paper Release Liner, Size-10Cm X 25Cm , Waterproof Wound Dressing With Non-Adherent Absorbent Pad, Transparent P.U. Film Dressing With Hypoallergenic Adhesive, Non Woven Absorbent Pad, Silicon Paper Release Liner, Szie-10Cm X 20Cm , Wrights Respirometer , X Ray Flim Size 08X10 , X Ray Flimsize 10X12 , Battery , Dermal Regeneration Template:Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer (Bilayer)Ce Certified, Sizes: 2In X 2In (5Cm X 5Cm),4In X 5In (10Cm X 12.5Cm),4In X 10In (10Cm X 25Cm),8In X 10In (20Cm X 25Cm) , Meshed Dermal Regeneration Template:Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer (Bilayer-Meshed)Ce Certified, Sizes: 2In X 2In (5Cm X 5Cm),4In X 10In (10Cm X 25Cm),4In X 10In (10Cm X 25Cm),8In X 10In (20Cm X 25Cm) , Dermal Regeneration Template: Single Layer: Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate Dermal Regeneration Template: Single Layer: Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate Ce Certified, Sizes:8In X 10In (20Cm X 25Cm),2In X 2In (5Cm X 5Cm),4In X 5In (10Cm X 12.5Cm),4In X 10In (10Cm X 25Cm) , Wound Matrix Thin:Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) Ce Certified, Sizes:4In X 10In (10Cm X 25Cm),4In X 5In (10Cm X 12.5Cm),2In X 2In (5Cm X 5Cm) , Programmable Valve Right Angle (Valve With Integrated Plastic Connectors & Priming Adaptor Plastic) , Programmable Valve Right Angle Unitized With 120 Cm Distal Catheter Without Siphongaurd (Comes As Valve With Integrated Plastic Connector, 14 Cm Ventricular Cathetor, Stain Less Steel Stylet, 120 Cm Distal Catheter Unitized & Priming Adaptor Plastic) , Programmable Valve Right Angle With Siphongaurd(Valve With Integrated Plastic Connectors & Priming Adaptor Plastic) , Programmable Valve Right Angle Unitized With 120 Cm Distal Catheter With Siphongaurd (Comes As Valve With Integrated Plastic Connector, 14 Cm Ventricular Cathetor, Stain Less Steel Stylet, 120 Cm Distal Catheter Unitized & Priming Adaptor Plastic) , Programmable Valve Inline Without Siphongaurd (Valve With Integrated Plastic Connectors & Priming Adaptor Plastic) , Micro Prog Valve With Rickam (Comes With 14Cm Ventricular Catheter, Stainless Steel Stylet, 120 Cm Distal Cathetor Unitized & Priming Adaptor Plastic) , Programmable Valve Micro W Rickham Res Only (Comes With Valve &Priming Adaptor Plastic) , Csf Flow Control Device , Express Cable (Connecting Cable Between Icp Monitor & Microsensor Icp Transsducer) , Microsensor Basic Kit (Contains Codman Microsensor Icp Transducer & 14 Gauge Touchy Needle With Stylet) (Can Be Used In Both Subdural & Intraparenchymal Pressure Monitoring Applications) , Microsensor Skull Bolt Kit (Contains Codman Microsensor Icp Transducer Along With Winged, 0.7 Mm Skull Bolt With Leak Proof Compression Cap, Spacing Washer, Obturator / Durapierce, 2.7 Mm Drill Bit, Hex Wrench) , Microsensor Ventricular Catheter Kit (Contains 38 Cm Clear Ventricular Cathetor With Preloaded Stylet, Integrated Maniature Strain Gauge Pressure Transducer, 7 Gauge Tunneling Trocar For Placement, Catheter Anchoring Clip) (In Conjunction With Icp Express Monitor This Can Be Used Wide Variety Of Patient Monitring Systems For Display Of Icp Wave Form Or For Consideration Of Icp Data With Other Vital Clinical Monitoring Information) , Raney Scalp Clip- Disposable & Plastic. ( 10 Clips Per Package & 20 Packages Per Case) Compatable With 205115 Raney Clip Applying Forcep) , Raney Reusable Scalp Clip Applying Forceps , Disposable Perforator- Size 14Mm/11Mm , Disposable Perforator 11Mm/8Mm , Disposable Perforator 9Mm/6Mm , Bipolar Forceps Handle Flat & Insulated , Single Use Tips. (8.5 Total Length And 3.5 Working Length (Isocl Lpt 8.5L 3.5Wl .25Mm Ea) , Adhesion Barrier Matrix For Duraplast Made From Ultra Pure Collagen For Dural Regeneration. Clinical Studies Have Shown Effective Protection Against Csf Leakage With Sutureless Closure And No Reports Of Foreign Body Reactions Or Graft Rejections Usfda Approved. Available In Many Sizes:1 X 1,1 X 3,2 X 2,3 X 3,4 X 5 , Absorbable Gelatin Sponge Film, Without Formaldehyde, Should Be Sterilized By Dry Heat. , Size: 20Cm*7Cm*.05Cm, Box Of 20 , Absorbable Gelatin Sponge Standard, Without Formaldehyde, Should Be Sterilized By Dry Heat. , Size: 7Cm*5Cm*1.0Cm, Box Of 20 , Absorbable Gelatin Sponge Special, Without Formaldehyde, Should Be Sterilized By Dry Heat. , Size: 7Cm*5Cm*0.1Cm, Box Of 20 , Absorbable Gelatin Sponge, Anal Without Formaldehyde, Should Be Sterilized By E Beam Irradiation. Size: 0.3Cm*8Cm , Box Of 20 , Absorbable Gelatin Sponge Powder Without Formaldehyde,,Size: 1Gm, Box Of 6 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, 2X14, Box Of 12 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, - 4X8, Box Of 12 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With Proven Bactericidal Property & Efficacyand Fully Absorbable In 1-2 Weeks,- 2X3, Box Of 12 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Lightweight Fibrillar/Layer Form, With Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, Fibril Material (7Layers) For Broad Surface Area Coverage. Approved By Us Fda Size 1X2 Inch, Box Of 10 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Lightweight Fibrillar/Layer Form, Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, Fibril Material (7Layers) For Broad Surface Area Coverage. Approved By Us Fda Size 2X4 Inch, Box Of 10 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Lightweight Fibrillar/Layer Form, Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, Fibril Material (7Layers) For Broad Surface Area Coverage. Approved By Us Fda Size 4X4 Inch, Box Of 10 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With High Tensile Strength And Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, , Can Be Wrapped And Sutured, Approved By Usfda,1 In X 1 In, Box Of 12 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With High Tensile Strength And With Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks,Can Be Wrapped And Sutured, Approved By Usfda, 1 In X,3.5 In, Box Of 10 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With High Tensile Strength And With Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks,Approved By Usfda, 3 In X 4 In, Box Of 24 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat With High Tensile Strength Andwith Proven Bactericidal Property & Efficacy And Fully Absorbable In 1-2 Weeks, ,Can Be Wrapped And Sutured, Approved By Usfda, 6 In X 9 In, Box Of 10 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Documented Fast Hemostatis.Ease-Of-Use In Both Open And Minimally Invasive Procedures. Can Be Repositioned Easily Without Sticking To Instruments, Approved By Us Fda Size 1X2 Inches , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Can Be Repositioned Easily Without Sticking To Instruments, Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Can Be Repositioned Easily Without Sticking To Instruments, Approved By Us Fda Size 4X4 Inch , All-Human (Bovine Aprotinin Free) Fibrin Sealant A) A Package- 1Mlcontaining: One Vial Each Of Bac2 (50-90 Mg/Ml Fibrinogen) And Thrombin (800-1200 Iu/Ml Human Thrombin) Frozen Solutions B) All-Human Formulation Free Of Bovine Aprotinin C) Triple-Lumen Tip To Prevent Clogging Inside The Applicator D) Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures E) Maintains Fibronectin/Fibrinogen Ratio Within Physiologic Ranges , All-Human (Bovine Aprotinin Free) Fibrin Sealant A) A Package- 2Mlcontaining: One Vial Each Of Bac2 (50-90 Mg/Ml Fibrinogen) And Thrombin (800-1200 Iu/Ml Human Thrombin) Frozen Solutions B) All-Human Formulation Free Of Bovine Aprotinin C) Triple-Lumen Tip To Prevent Clogging Inside The Applicator D) Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures. E) Maintains Fibronectin/Fibrinogen Ratio Within Physiologic Ranges , All-Human (Bovine Aprotinin Free) Fibrin Sealant Laparoscopic Tip Of 35Cm , All-Human (Bovine Aprotinin Free) Fibrin Sealant Robotic Tip Of 45Cm , All-Human (Bovine Aprotinin Free) Fibrin Sealantairless Spray Accessory , All-Human (Bovine Aprotinin Free) Fibrin Sealant Control Tip Of 4 Cm , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Chg Impregnated Foam Disc, Containing 250Ug Of Chg Per Mg Of Disc ,1” Disk (2.5 Cm) W/4.0 Mm Center Hole , Chg Impregnated Foam Disc, Containing 250Ug Of Chg Per Mg Of Disc , 3/4” Disk (1.9 Cm) W/1.5 Mm Center Hole , Chg Impregnated Foam Disc, Containing 250Ug Of Chg Per Mg Of Disc ,1” Disk (2.5 Cm) W/7.0 Mm Center Hole , Absorbable Adhesion Barrier, 3X4 ( C ), Box Of 10 , Absorbable Adhesion Barrier,3X4 ( C ) Single Foil , Usfda/Ece & Iso Certified Power Port Isp M.R.I. Implanted Port With Suture Plugs With Attachable 8F Chronoflex Polyurethane Open-Ended Single-Lumen Venous Catheter With Palpation Points On Septum. Sterile Pack Biocompatible Sterile Sink Resistant Material, Should Be Biocompatible. Radiopaque Marking Should Be Available. Complete Sterile Pack Including Complete Kit, Catheter Must Allowed Injection Of Contras Media At 5Ml/Sec, Allow Cvp Momnitoringf Allow. , 48Cm Curved Jaw Cordless Ultrasonic Disssector , Intermediate Sized Port With Large Septum & Silicon Filled Suture Plugs Usfda / Ece & Iso Certified, Should Be M.R.I. Compatible With Cathlock Radioopaque Ring, Attachable 8F Choroflex Polyurethane Single Lumen Venous Catheter. Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible Radiopaque Marking Should Be Available Complete Sterile Pack Including Peel Apart Percutaneous Introducer System With Complete Kit. , Intermediate Sized Port With Large Septum & Silicon Filled Suture Plugs Usfda / Ece & Iso Certified, Should Be M.R.I. Compatible With Cathlock Radioopaque Ring, Attachable 9.6F Choroflex Polyurethane Single Lumen Venous Catheter. Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible Radiopaque Marking Should Be Available Complete Sterile Pack Including Peel Apart Percutaneous Introducer System With Complete Kit. , Intermediate Sized Port With Large Septum & Silicon Filled Suture Plugs Usfda / Ece & Iso Certified, Should Be M.R.I. Compatible With Cathlock Radioopaque Ring, Attachable 8F Groshong Catheter. Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible Radiopaque Marking Should Be Available Complete Sterile Pack Including Peel Apart Percutaneous Introducer System With Complete Kit. , M.R.I. Plastic Single Lumen Port Usfda / Ece & Iso Certified, Peel-Apart Percutaneous Introducer System With Attachable Groshong 8Fr Catheter , M.R.I. Plastic Single Lumen Port Usfda / Ece & Iso Certified, Peel-Apart Percutaneous Introducer System With Attachable Open-Ended Silicone 9.6Fr Catheter ( 75 Cm Length) , M.R.I. Plastic Single Lumen Port Usfda / Ece & Iso Certified, Peel-Apart Percutaneous Introducer System With Attachable Chronoflex 8Fr Catheter , 13Cm Curved Jaw Cordless Ultrasonic Disssector , Usfda/Ece & Iso Certified Power Port Isp M.R.I. Implanted Port With Suture Plugs Having Attachable 8F Catheter With Close-Ended Single-Lumen Venous Catheter At Distal Tip And Palpation Points On Septum. Sterile Pack Biocompatible Sterile Sink Resistant Material, Should Be Biocompatible. Radiopaque Marking Should Be Available. Complete Sterile Pack Including Complete Kit, Catheter Must Allowed Injection Of Contras Media At 5Ml/Sec, Allow Cvp Momnitoringf Allow. , M.R.I. Plastic Single Lumen Port Usfda / Ece & Iso Certified, Peel-Apart Percutaneous Introducer System With Pre-Attach Open-Ended Silicone 9.6Fr Catheter ( 75 Cm Length) , M.R.I. Plastic Single Lumen Port Usfda / Ece & Iso Certified, Peel-Apart Percutaneous Introducer System With Attachable Groshong 8Fr Catheter With Open Suture Plugs , Usfda / Ece & Iso Certified, Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Sterile Pack Including Complete Kit. Chronic Hd Catheter With Split Tip Design, Insetion Lenght 14.5F, Split Tip, Straight Catheter Having Length - 19Cm , Usfda / Ece & Iso Certified, Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Sterile Pack Including Complete Kit. Chronic Hd Catheter With Split Tip Design, Insetion Lenght 14.5F, Split Tip, Straight Catheter Having Length - 23Cm , Usfda / Ece & Iso Certified, Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Sterile Pack Including Complete Kit. Chronic Hd Catheter With Split Tip Design, Insetion Lenght 14.5F, Split Tip, Alphacurve Catheter Having Length - 19Cm , Usfda / Ece & Iso Certified, Sterile Pack Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Sterile Pack Including Complete Kit. Chronic Hd Catheter With Split Tip Design, Insetion Lenght 14.5F, Split Tip, Alphacurve Catheter Having Length - 23Cm , Battery Guide , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Straight Catheter, Catheter Length - 19Cm , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Straight Catheter, Catheter Length - 23Cm , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Straight Catheter, Catheter Length - 27Cm , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Straight Catheter, Catheter Length - 35Cm , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Straight Catheter, Catheter Length - 42Cm , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Alphacurve Catheter, Catheter Length - 19Cm , Usfda / Ece & Iso Certified, Sterile Pack, Biocompatible Sterile Kink Resistant Material Should Be Biocompatible. Complete Sterile Pack Including Preloaded Stylet Kit. Chronic Hd Catheter With Symmetric Tip Design, Insertion Length 14.5Fr, Less Than 1% Recirculation Rate, Tapered Cuff And 360 Degree Side Holes With Air Guard, Alphacurve Catheter, Catheter Length - 23Cm , 39Cm Curved Jaw Cordless Ultrasonic Disssector , Glycolide, Caprolactone And Calcium Stearoyl Lactylate -90 Absorbable Wound Closure Device 3-0 Clear 45Cm P-14 X12 , Glycolide, Caprolactone And Calcium Stearoyl Lactylate -90 Absorbable Wound Closure Device 3-0 Clear 60Cm P-14 X12 , Polyglyconate Copolymer Ofglycolic Acid Trimethylene Carbonate-Absorbable Wound Closure Device 3-0 Green 30Cm Cv-23 X12 , Polyglyconate Copolymer Ofglycolic Acid Trimethylene Carbonate-Absorbable Wound Closure Device 3-0 Green 15Cm V-20 X12 , Polyglyconate Copolymer Ofglycolic Acid Trimethylene Carbonate-Absorbable Wound Closure Device 3-0 Green 15Cm Cv-23 X12 , Polyglyconate Copolymer Ofglycolic Acid Trimethylene Carbonate-Absorbable Wound Closure Device 4-0 Green 15Cm Cv-23 X12 , Polyglyconate Copolymer Ofglycolic Acid Trimethylene Carbonate- Absorbable Wound Closure Device 0 Green 45Cm Gs-21 X12 , Copolymer Of Butylene Terephthalate And Polytetra Methylene Ether Glycol- Non Absorbable Wound Closure Device 1 Blue 45Cm Gs-21 X12 , Polyester With Absorbable Collegen Film & Pre Placed Suture -Pcox 20X15cm , Polyester With Absorbable Collegen Film & Pre Placed Suture-Parietex Pcox Thr 25X20cm , 26Cm Curved Jaw Cordless Ultrasonic Disssector , Polyester With Absorbable Collegen Film & Pre Placed Suture-Parietex Pcox Thr 30X20cm , Polyester With Absorbable Collegen Film & Pre Placed Suture-Parietex Pcox Rnd Thr 15Cm , Polyester With Absorbable Collegen Film & Pre Placed Suture-Parietex Pcox Rnd Thr 15Cm , Polypropylene Mesh-Parietene Std Pp 6X11cm X3 , Polypropylene Mesh- Parietene Std Pp 15X15cm X1 , Polypropylene Mesh-D84 Parietene Std Pp 30X30cm X1 , Polypropylene Mesh-Parietene Std Pp 15X10cm X3 , Polypropylene Mesh-Ppm1515x3 Parietene Macro Pp 15X15cm , Mesh Fixation Device -Protack* 5Mm Instrument - Titanium- Non Absorbable , Copolymer Of Glycolic Acid & Lactic Acid (Poly- Glycolide- Co-Lactide )-Mesh Fixation Device -Abs Fixation Device 30 Tacks , Generator , Linear Cutter With With Selectable Reload Stapler60mm , Linear Cutter With With Selectable Reload Stapler80mm , Linear Cutter With With Selectable Reload Stapler1000mm , Linear Cutter Cartridge 60Mm ( White) , Linear Cutter Cartridge 60Mm (Blue) , Linear Cutter Cartridge 60 (Green) , Linear Cutter Cartridge 80Mm ( White) , Linear Cutter Cartridge 80Mm ( Blue) , Linear Cutter Cartridge 80Mm ( Green) , Linear Cutter Cartridge 100Mm ( Blue ) , Linear Cutter Cartridge 100Mm ( Green) , Endoscopic Linear Cutter Stapler , Endoscopic Linear Cutter Reloads , Open Linear Stapler , Reload For Open Linear Stapler , X Ray Flimsize14X17 , Y Connector Kit ( Y Connector With Extra Long Ventricular Catheter) , Yankur Suction O Moulded Yankaur Suction Handle With Flexible Kink Resistant Tube. ; O Used For Removal Of Secretions And Blood Peri-Operatively By Providing ; Unobstructed Suction During Prolonged Use. ; O Soft Flexible Adaptors At Both Ends Of The Tube Provide Safe Grip To The Handle As Well As Suction Source. ; O Suitable For Use With Or Without Vent Control Facility. ; O Vent Port Is Closed With Tight Fit Sleeve, Which Can Be Removed By Small Incision To Shift To Vent Control System. ; O Sterile, Individually Packed In A Peelable Soft Blister Pack. ; O Available In Two Versions : Handle With Standard Tip And Crown Tip. , B P Bladesize- 10 To 27 , Cotton Bandage Size-06M X15 Cm , Liga Clip 100 , Micropore Tape 2Inch , Micropore Tape 4 Inch , Nagal Prong Oxy Set , Nebulizer Machine , Oxy Set Chield , Skin Stepler , Skin Stepler Remover , 1 Ml Syringe` , Tecustomy Tube , Urine Collection Bag With Meter , Vaccum Suction Set , Rigid Lens Power Size-15 To25 , Hydrophobic Lens Power Size-16 To 25 , Adhesive Eye Pad , Sterile Eye Drape(70Cmx90cm) , Dark Glasses , Cord Clamp , Endotracheal Tube With Subglottic Suction Size-5Mm To 9Mm , Endotracheal Tube With Cuff(Plain) Size-5Mm To 9Mm , Tracheostomy Tube With Subglottic Suction Size-5Mm To 9Mm , Oral Pharyngeal Airway Size-5Mm To 9Mm , Trusilk Typer Cutting Size-0 To2 , Close Suction Catheter Size-10Fr To 18 Fr , Nasogastric Tube Silicon Size-10 Fr To 18Fr , Folye’S Catheter Plain All Size , Folye’S Catheter Triple Lumen ( Irrigation ) Size- 16To 30Fr , Centera Cath ( Arterial Line ) Size- 16G, 18G, 20G, 22G.( Length- 15Cm/8Cm ) , Venflon Iv Cannula Size 14 To 24G , Butter Fly Iv Cannula Size 14 To 2G , Tracheostomy Mask. , Tracheostomyset Percutaneous , Tracheostomyset-Open. , Nasal Prong-Adult , Nasal Prong-Pediatric , Venture Mask , Non- Rebreathing Mask. , High Flow Nasal Cannula Size- Medium, Large, Small , Stylets ( Intubation) Size- Adult , Pediatric , , Bougie ( Intubation) Size Adult, Pediatric , Laryngoscope Battery , Water Seal Bag , Condom Catheter , Cvp Tranducer , Flow Trac , Infusar Pressure Bag , Tranducer Stand , Big Scale , Peripherally Insrted Centeral Venous Polyurethane Catheter ( Picc Line). , Pmo Line , Iv Extension Line 10 Cm- Double Lumen , Iv Fixater Transparent , Beurrettic ( Pediatric ) Set , Tegaderm Size- Large, Medium, Small , Leukoplast Size- 2 & 3 Inch , Irrigation Syringe , Cotton Ball
Contract Date: Nov 20, 2025 Contract Value : ₹ 20.00 Crore
Boards / Undertakings / PSU No of Bidders 15
Jharkhand View Result →
48.
Defence #8195446 AOC
Tender For Cleaning Sanitizing Maintenance Of Oh Tanks Reservoirs Ug Sumps Swimming Pool Filtration Plant And Other Connected Works Under Ge Narangi.; 1 Material and labourfor seven stage cleaning and sterilization of insideof overhead RCC tank atC block MD Accn Area of capacity 2.00 Lakh Gallon through bacteriological treatment by using chemical as approved byE-in-cs Branch or as recommended by GE and ultra voilet rayincluding arrangement of necessary tools & plants, labouretccomplete all as specified and as directed. Seven stages are as under follows :-(a)First stage is to drain out the water by using exit valve orown high capacity dewatering ststem.(b) Second stage is cleaning all the algae fromation inside the tank by using approved chemical as recommended by GE including scrubbing the walls of the tank.(c)Third stage is scrubbing the wall with mechanical scrubber and fresh water cleaning by high speed jet pump (rotary & flat) to remove all scalling, algae and other formed particles on internal surface of the tank completely. (d)Forth stage and first bacteria screening is sterilization by using approved chemical as recommended by GE.(e) Fifth stage is cleaning the floor of the water tank by heavy duty industrial vacuum cleaner and sludge sucker having maximum 1200W with sutable heavy duty rugged motor to free of any foreign and loose particles on any nature.(f)Sixth stage is the second bacteria screening and sterilizing method by usingultra violet ray by heavy duty UV radiation which shall havecovering 360 degree of sterilization withthe tank to kill all suspended bacteria.(g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor and wall of the water tank by using oxidizing agent Bleaching powder or equivalent non- toxic bio- degradable eco friendly anti bacterial agent certified by Govt approved laboratory to disinfect the over head tank from all harmful pathogens complete all as specified and directed . 2 All as per item No. 1 Above but atB block MD Accn area ( Havalder Pump House),of capacity 1.00 Lakh gallon. 3 All as per item No. 1Above but atB block MD Accn area ( Havalder Pump House) & 14 FAD OTM of capacity 0.50 Lakh gallon. 4 All as per item No. 1Above but at Jintu Vihar MD Accn areaof capacity1.00 Lakh gallon. 5 All as per item No. 1 Above but atPhase-II MD Accn areaof capacity 1.00 Lakh gallon. 6 All as per item No. 1Above but at17 CZW areaof capacity 1.00 Lakh gallon 7 All as per item No. 1Above but atPhase-II MD Accn area & 222 ABOD OTM of capacity upto 0.25 Lakh gallon. 8 All as per item No. 1 Above but atABOD OTM Accn areaof capacity 1.00 Lakh gallon. 9 Material and labourfor seven stage cleaning and sterilization of insideof overhead pressed steel tank at Ph-II MD Accn Area of capacity 0.75 Lakh Gallon through bacteriological treatment by using chemical as approved byE-in-cs Branch or as recommended by GE and ultra voilet rayincluding arrangement of necessary tools & plants, labouretccomplete all as specified and as directed. Seven stages are as under follows :-(a)First stage is to drain out the water by using exit valve orown high capacity dewatering ststem.(b) Second stage is cleaning all the algae fromation inside the tank by using approved chemical as recommended by GE including scrubbing the walls of the tank.(c)Third stage is scrubbing the wall with mechanical scrubber and fresh water cleaning by high speed jet pump (rotary & flat) to remove all scalling, algae and other formed particles on internal surface of the tank completely. (d)Forth stage and first bacteria screening is sterilization by using approved chemical as recommended by GE.(e) Fifth stage is cleaning the floor of the water tank by heavy duty industrial vacuum cleaner and sludge sucker having maximum 1200W with sutable heavy duty rugged motor to free of any foreign and loose particles on any nature.(f)Sixth stage is the second bacteria screening and sterilizing method by usingultra violet ray by heavy duty UV radiation which shall havecovering 360 degree of sterilization withthe tank to kill all suspended bacteria.(g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor and wall of the water tank by using oxidizing agent Bleaching powder or equivalent non- toxic bio- degradable eco friendly anti bacterial agent certified by Govt approved laboratory to disinfect the over head tank from all harmful pathogens complete all as specified and directed . 10 All as per item No. 9Above but at 41 Veh Coy of capacity 0.072 Lakh gallon capacity. 11 All as per item No. 9Above but attarapore Enclave area of capacity 0.50 Lakh gallon. 12 All as per item No. 9Above but atPeer Baba colony area of capacity 0.072 Lakh gallon. 13 All as per item No. 9Above but atShopping Complex area of capacity 0.168 Lakh gallon. 14 All as per item No.9Above but atADG Complex area of capacity 1.00 Lakh gallon. 15 All as per item No 9 Above but atC block MD Accn area area of capacity 2.00 Lakh gallon. 16 All as per item No. 9 Above but atJorabat Colony of capacity 0.072 Lakh gallon. 17 Material and labourfor seven stage cleaning and sterilization of insideof Semi underground sump of capacity 0.20 Lakh gallon capacity at Jorabat Colony pump house , 41 Veh Coy Pump house, Peerbaba colony pump house and 1 ABW Madhuban Officers Mess through bacteriological treatment by using chemical as approved byE-in-cs Branch and as recommended by GE and ultra voilet rayincluding arrangement of necessary tools & plants, labouretccomplete all as specified and as directed. Seven stages are as under follows :-(a)First stage is to drain out the water by using exit valve orown high capacity dewatering ststem.(b) Second stage is cleaning all the algae fromation inside the tank by using approved chemical as recommended by GE including scrubbing the walls of the tank.(c)Third stage is scrubbing the wall with mechanical scrubber and fresh water cleaning by high speed jet pump (rotary & flat) to remove all scalling, algae and other formed particles on internal surface of the tank completely. (d)Forth stage and first bacteria screening is sterilization by using approved chemical as recommended by GE.(e) Fifth stage is cleaning the floor of the water tank by heavy duty industrial vacuum cleaner and sludge sucker having maximum 1200W with sutable heavy duty rugged motor to free of any foreign and loose particles on any nature.(f)Sixth stage is the second bacteria screening and sterilizing method by usingultra violet ray by heavy duty UV radiation which shall havecovering 360 degree of sterilization withthe tank to kill all suspended bacteria.(g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor and wall of the water tank by using oxidizing agent Bleaching powder or equivalent non- toxic bio- degradable eco friendly anti bacterial agent certified by Govt approved laboratory to disinfect the over head tank from all harmful pathogens. Complete all as specified and directed. 18 All as per item No 17above but of capacity 1.00 Lakh gallon at New Havalder pump house 19 All as per item No 17above but of capacity 3 x 1.5 Lakh gallon at Main pump house Reservior Tank. Note : 1.5 LG Tank to be measured as one job. 20 All as per item No 17 above but of capacity 1.50 Lakh gallon at Main pump house (Circular Intake sump). 21 All as per item No 17above but of capacity 0.50 Lakh gallon at Hav pump house (Old) and 1 ABW Madhuban Officers Mess 22 All as per Item No.17 above but for Semi-UG Sumps at Swimming Pool Pump House capacity 0.5 Lakh Gallon. 23 Material and labourfor seven stage cleaning and sterilization of insideof2X semi underground sumps at water filtration plant of capacity 0.50 Lakh gallon of each semiundergroundsump atE Block pump housethrough bacteriological treatment by using chemical as approved byE-in-cs Branch and or as recommended by GE and ultra voilet rayincluding arrangement of necessary tools & plants, labouretccomplete all as specified and as directed. Seven stages are as under follows :-(a)First stage is to drain out the water by using exit valve orown high capacity dewatering ststem.(b) Second stage is cleaning all the algae fromation inside the tank by usingE-in-cs Branch approved chemical as recommended by GE including scrubbing the walls of the tank..(c)Third stage is scrubbing the wall with mechanical scrubber and fresh water cleaning by high speed jet pump (rotary & flat) to remove all scalling, algae and other formed particles on internal surface of the tank completely. (d)Forth stage and first bacteria screening is sterilization by using E-in-cs Branch approved chemical as recommended by GE.(e) Fifth stage is cleaning the floor of the water tank by heavy duty industrial vacuum cleane rand sludge sucker having maximum 1200W with sutable heavy duty rugged motor to free of any foreign and loose particles on any nature.(f)Sixth stage is the second bacteria screening and sterilizing method by usingultra violet ray by heavy duty UV radiation which shall havecovering 360 degree of sterilization withthe tank to kill all suspended bacteria.(g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor and wall of the water tank by using oxidizing agent terbac G65/ Sodium Peraoxide or equivalent non- toxic bio- degradable eco friendly anti bacterial agent certified by Govt approved laboratory to disinfect the over head tank from all harmful pathogens complete all as specified and directed.(Note : cleaning of2x Semi UG sump of capacity 0.50 LGis considered as one job)Note for item No. 1 To 23 :(a) The cleaning will be done as per mechanised seven stage process and results will be verified by the competant authority. (b) The notice for the interruption of water supply shall be intimated to the concerned Engineer In Charge prior to execution of the work and and the process shall be completed within 24 hours of begining the work to avoid inconvenience of water supply in the effected areas. In case the contractor fails to complete the complete cleaning process and resuming the water suooly within 24 Hours , panel recovery of Rs 5000.00 per day will be recovered for the job effected forwhich the contractor shalll not have any extra claim whatsoever from the Dept.. (c)The unit rates quoted by the contractor shall be deemed to be inclusive of Writing date of cleaning in white letters of size as directed on black background. 24 All as per Item No. 23 above but for Water Treatment plant capacity 9 MLD consisting of 06 Nos Sumps, 04 Nos Filtration beds, 02 Nos Intake tanks, raw water passing drains, Treated water collection tanks - 04 Nos, Sludge/back washing drains approx 60RM.The job also include two coat of synthetic enamel painting of pipe lines, gear boxex, MS mixersincude valves of various sizes and white wash of filters beds in a interval of 3 months complete all as specified and directed . 25 Material and labour for comprehensive cleaning of B Block Natural Water Resource and FAD Natural Water Resource of approx 1.0 lakh litres by complete washing out of old settled muddy sand, soil mixture (sludge) etc and removal of settled sludge to a suitable distance not exc. 50mtr complete all as specified and as directed. The rate includes cleaning of pipe lines of approx distance of 1KM from pump house each side include one coat of lime white wash complete all as specified and directed. (Note : 1.Cleaning of one Natural resource be considered as one job . 2. Cleaning of Natural resources be carried out as per requirement on urgent basis). 26 Material and labour for comprehensive cleaning of swimming pool of size 50m X 21m (Olympic Size with Diving Zone)metres situated near Rhino Shopping Complex by complete washing out of old settled water including scrapping off the old surfaces using wire brush/stainless steel wiper etc and removal of settled sludge to a suitable distance all as directed at site and cleaning of entire swimming pool by using bleaching powder, tiles cleaning chemicals, detergent and wiping off residual waste water through the drain out chamberincluding sun drying complete all as specified and as directed.(Note: The work shall be carried out by the contractor after seasonal closure of swimming pool) 27 All as per item No 26 here-in-before but for Swimming Diving Pool of size 15m X 15m. 28 Material and labourfor lifting of submersible non clogging pump set from sewage well including dismantling all connections and keeping aside for reinstalling after comprehensive cleaning of sewage treatment plant reservoirs at Phase-II area such as collection cum equalization tank, CC tank, tube settler tank and clear water sump by dewatering and removal of existing sludge from various chambers and scrapping off after draining out waste/sludge and depositing to a suitable location as directed at site, cleaning of all reservoirs mentioned above using bleaching powder and wire brush and wiping off properly including sun drying before re commissioning at site complete all as specified and as directed. Note: Proper shut down shall be taken before commencement of subject work 29 Taking out old UNSV MS Angle/ channel/ Sheet from Open well & Jack well sumps and supply and fabricated MS Covers from 50x50x6mm thck MS Angle Iron frame, MS sheet of size 3mm thick, MS rods, (Fe.290.Gde-E-165) include handle for lifting completeinclude painting with one coat of Red oxide paintand two coat of synthetic enamel paint as per existing size complete all as specified and directed. (Note : Job include cutting corroded structure by welding, fabrication of new structure by welding, cutting and fixing with suitable arrangements). 30 Taking out Old UNSV MS level gauge and supply aqnd fix new MS level gauge of same length as existing having marking of levels at various intervals with bold letters so that it is visible from distance.The work include fixing the gauge by welding , painting and connected assy such as level indicator, float ball, SWR rope and fixing level in floor of UG sump of2 Mtr height complete all as specified and directed. 31 Taking out suction pipe of 150mm bore with defective CI foot valve of 100 mm dia for replacement of the foot valve (ISI marked) including necessary nut, bolt, washers and cutting threading of GI pipe/MS Pipe and lowering in the sump complete all as specified and as directed. 32 Taking out suction pipe of 150mm bore with defective CI foot valve of 150 mm dia for replacement of the foot valve (ISI marked) including necessary nut, bolt, washers and cutting threading of GI pipe/MS Pipe and lowering in the sump complete all as specified and as directed. 33 Taking out suction pipe of 200mm bore with defective CI foot valveof 200 mm dia for replacement of the foot valve (ISI marked) including necessary nut, bolt, washers and cutting threading of GI pipe/MS Pipe and lowering in the sump complete all as specified and as directed. 34 Supply and fixing in repair 100 mm bore CI non-return sluice valve, heavy duty, ISI marked (IS 5312), flanged end including rubber gasket joints, nuts, bolts etc including testing complete all as specified and as directed. 35 Supply and fixing in repair 150 mm bore CI non-return sluice valve, heavy duty, ISI marked (IS 5312), flanged end including rubber gasket joints, nuts, bolts etc including testing ccomplete all as specified and as directed. 36 Material and labour labour for painting of MS structure of of PSS tank of capacity 0.10 LG from outside tank all sides including MS staging upto height of 20 Mtr height having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow include fittings and various type of valve as per colour code in 41 Veh coy complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed .. 37 Material and labour for complete cleaning of inside surface of Pressed steel tank (over a height of approx 20 mtr) with wire brush (including hammering, sand blasting to remove heavy rust) removing of mild scale and rust by application of rust removing chemical by brush and leave the surface to react for 15-30 Mins.Then the rusty surface will change their colour.After that remove the loose particles of rust by wire brush complete all as specified and directed.Make:- Sika Rustoff 100 or equivalent in Pidilite/ FOSROC 38 Material and labour for one coat food grade epoxy based Zinc rich corrosion protection primer by stirring the hardner and resin individually with mechanized strirrer of proper size.Then add the entire content of the hardner into Resin container and stir the two components throughly using a low speed mixer for about 2 to 3 minutes until a uniform colour of the mixture is obtained.One coat of 100 micron need to be applied on total inside steel surface and external surface where needed complete all as specified and directed. Make:- Sika Friazinc R or equivalent in Pidilite/ FOSROC) 39 Material and labour for coating with foodgrade coaltar epoxy resin (two part reaction hardening chemical resistant coating of low solvent content based on coal tar epoxy resin in combination with mineral fillers)after through mixing of a base and hardner, the mixed material is applied on the steel surface including second coat where it is needed.Since the pot-life is very short, application must be done very quickly (Inside of tank application only). complete all as specified and directed.Make:-Sika Interol poxitar or equivalent in Pidilite/ FOSROC) 40 Material and labour for removal of old inter panel sealant and use a solvent free two component epoxy resin, mixing the component A and Bat recommended ratio and prepare the sealing material and use it in between the jointing panel as sealant to assure all the interplate joints are sealed in appropriate manner complete all as specified and directed.Make:- Sika Guard 694F (I) or equivalent in Pidilite/ FOSROC) 41 Material and labour labour for preparation of existing painted surfaces, painting of RCC structure of of RCC OH tank of capacity 2.0 LG in C block MD Accn area from outside tank including MS staging upto height of 24 Mtr heightas exixting having, RCC structure, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow include fittings and various type of valve as per colour code complete from ground level to tank includingone under coat and one finishing coat of weather coat paint ofexisting colur or as directed by Engineer-in-chargecomplete include marking arrows all as specified and directed by Engr-in-Charge. Note : Contractor will approve colour schemes to be approved before start painting works complete all as specified and directed . 42 All as per item No. 41 Above but atB block MD Accn ( Havalder Pump House), Jintu Vihar MD Accn area,17 CZW , Phase-II MD Accn,ABOD OTM Accn area of capacity 1.00 Lakh gallon. 43 All as per item No. 41 Above but atJintu Vihar MD Accn area,of capacity 1.00 Lakh gallon. 44 All as per item No.41Above but atB block MD Accn area ( Havalder Pump House) of capacity 0.50 Lakh gallon. 45 All as per item No. 41 Above but at areaof capacity 0.25 Lakh gallon. Note for item No. 1To 45:(a) The cleaning will be done as per mechanised seven stage process and results will be verified by the competant authority. (b) The notice for the interruption of water supply shall be intimated to the concerned Engineer In Charge prior to execution of the work and and the process shall be completed within 24 hours of begining the work to avoid inconvenience of water supply in the effected areas. In case the contractor fails to complete the complete cleaning process and resuming the water supoly within 24 Hours , panel recovery ofRs 5000.00 per day will be recovered for the job effected forwhich the contractor shalll not have any extra claim whatsoever from the Dept. (c)The unit rates quoted by the contractor shall be deemed to be inclusive of Writing date of cleaning in white letters of size as directed on black background.(d) Rates include T&P and staging requiredfor the job in the quoted rates against BOQ items nothing extra not to be paid on this account.(e)Necessary saffety equipments, saffety measure should be strictly maintained by the persons employed in the work during execution of work as per norms or as directed or required at site during execution of work.Competent person should be present during execution of work. (f) All waste material/ sludge /mud/ muddy sand retrieved after repair/ cleaning worksto be removing from site and dispossed off in low lying area out side the cantt.Rates of transportation to be included in the quoted rates. If contractor fails to doing the job a panel recovery of Rs 3000.00 will be recovered from the job effected forwhich the contractor shalll not have any extra claim whatsoever from the Dept.. 46 Material and labour for scrapping , hammering, chseling scrubbing to surfaces of tank at any height using electric/mechenical means, hand brush blower, etc as recommended by the manufacturer and disposal of all unserviceable complete upto a distance n exc 50 m complete all as specified and directed . 47 Material and labour for applying two coats of hygienic coating of inner walls & floors/bottoms of OHT/UG Sumps using 2 parts, solvent free epoxy resin coating for lining and potable water structure having 100% solid contents, approved by CFTRI(USFDA-175, 300) and complies to ASTM D 2370, etc non toxic cured film meets requirement as per IS 9883 : 1981, Coating to be applied after proper surface preparation to remove loose dust, dirt etc.cleaning , mixing cement in ratio as per OEM instruction by using slow speed electric drill and application of 2 coats at 200 microns DFT complete as per specification and as directed by Engineer in charge. Make : Thermax Ltd, Trimurti (India), Tikitar Danosa (Pvt) Ltd/ Sikka/Pidilite 48 Material and labour for preparation of existing painted surfaces of IRPs of capacity 6000 GPH installed at various locations by applying two coat of synthetic enamel paint to outside surfaces of water lines, inlet and out, overflow pipes of inlet & outlet of pumping linesas per colour code include support structure, fitting & valves, include replacement of flexible pipes of same size complete include marking flow arrow with white synthetic enamel paint complete all as specified and directed. 49 Surface dressing not exc 15cm deep including cleaning away all grass vefetation, saplings, shrubs, brushwood, under growth, rooth , levelling & spreading water and removing rubbish, accumulated sand/mud/wastage up to a distance 200 mtrs outside the periphery of the area under clearance complete all as specified and directed. 50 Material and labour for complete removal of painton newely plastered or old unplastered surfaces including preperation of surfaces by Scrubbing, cleaning the exterior surface of Semi UGreservoir of various capacity and applying two coats of cement base paint on the outer surfaces of height up to 3 meter as existing in various Pump Houses include marking tank cleaning and other details base with black paint over white colour by synthetic enamel paint complete all as specified and directed. 51 Material and labour for cement concrete 1:3:6 type C-2,(using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and directed. 52 Material and labour for cement concrete1:2:4 type B-1,(using 20 mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and directed. 53 Material and labour for rendering 10mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces, water line support pillar and three coat of white wash andinclude taking down old complete all as specified and directed . 54 Material and labour for writing the letters TANK CAP ____ LG as specified andSAVE WATERon the tank having uo to height of upto 24 mtr staging with white synthetic enamel painton front side and MES on other side.Size of letter not less than 40 CMs complete all as specified and directed . 55 Taking down old UNSV and Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm including fixing arrangement with OH Tank complete all as specified and directed. 56 Material and labour for preparation of existing painted surfaces of CI/DI/MS pipe line and applying two coat of synthetic enamel paint to outside surfaces of water lines, inlet and out, overflow pipes of inlet & outlet of pumping linesas per colour code include support structure, fitting & valves complete of sizes 300 mm dia pipe complete include marking flow arrow with white synthetic enamel paint complete all as specified and directed . 57 Ditto but of size 200mm bore 58 Ditto but of size 150mm bore 59 Ditto but of size 100mm bore 60 Ditto but of size 50mm to 80mm bore Note for item No. 1To 60:(a) The cleaning will be done as per mechanised seven stage process and results will be verified by the competant authority. (b) The notice for the interruption of water supply shall be intimated to the concerned Engineer In Charge prior to execution of the work and and the process shall be completed within 24 hours of begining the work to avoid inconvenience of water supply in the effected areas. In case the contractor fails to complete the complete cleaning process and resuming the water supoly within 24 Hours , panel recovery of Rs 5000.00 per day will be recovered for the job effected forwhich the contractor shalll not have any extra claim whatsoever from the Dept.(c)The unit rates quoted by the contractor shall be deemed to be inclusive of Writing date of cleaning in white letters of size as directed on black background.(d) Rates include T&P and staging requiredfor the job in the quoted rates against BOQ items nothing extra not to be paid on this account.(e)Necessary saffety equipments, saffety measure should be strictly maintained by the persons employed in the work during execution of work as per norms or as directed or required at site during execution of work.Competent person should be present during execution of work. (f) The complete work will be carried by or in persons supervision of M/s Rays Cleantech/M/s M L Treatment/ M/s MS Tank Cleaning Pvt Ltd or other professional agency for doing such type of work and after completion of work necessary testing certification be obtain by them by the contractor rates to be included in the quoted rates.(g) All waste material/ sludge /mud/ muddy sand retrieved after repair/ cleaning worksto be removing from site and dispossed off in low lying area out side the cantt.Rates of transportation to be included in the quoted rates. If contractor fails to doing the job a panel recovery of Rs 3000.00 will be recovered from the job effected forwhich the contractor shalll not have any extra claim whatsoever from the Dept.. 61 Material and labour for earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.50Mtr below ground level.The earth plate to be connetced with earth strip 25×4mm thick galvanised iron or steel wire all as shown in para no 4 the earthing test pointall as specified and directd. The GI earthing stripto be protected by galvanised iron pipe 40 mm bore (medium grade) up to ground level and there after with40mm dia HDPE pipe up to test point. Earthing shall be include withproviding funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) up to 90 cm all around earth platefurther filled with60 cm thick Tibba sandand 2nd layer with30 cm of Magnesium sulphate powder (compact thickness ) , 3rd layerwithtibba sand up to the ground level. Earthing shall also be include for providingconcrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work 62 Taking down old UNSV light fittings andsupply and fixing LED flood light 100watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant include MS bracket , nuts & bolts fixed on wall or OHT pillar, or MS Structure complete with driver and lamp complete all as specified and directed. 63 Material and labour for earth continuity conductor or main earthing lead for down conductor fixed to wall on porceline insulators/saddle/PVC saddle or on button or recess or chases or burried in ground or drawn in conduit/ pipe or fixed to bldg/roof/pole or any other etc as required aluminium strip of size 25 x 3.15mm include screws, nuts & bolts complete all as specified and directed. 64 Material and labour for GI pipe medium grade40 mm dia with socket at one end in the length of 1.2mtr for supporting of air termination rod or protection of earth conitnuity strip. 65 Supply and fix in repair Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm longhex. head screw complete. 66 Supply and fix in repair thermoplastic ( Polycarbonate) junction box for test point without terminal block of dimension 130x180x77mm IP 66 halogen free and weather proof including four hexagonal anticorrosive screws for outdoor installation completeall as specified and as directed. 67 Taking down UNSV and supply and fix air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed. 68 Material and labour for taking out existing filter media from factory fabricated Multi Grade IRPs/sand filter (as per IS:2825) .Filter shall be provided with inlet, outlet pressure gauge,sample cocks, charge of filter media graded sand and internals consisting of strainer fitted on plate for collection. cylindrical shape mild steel construction, Dia of vessel 2400x 2000(H) ,Operating Pressure 1 to 2 kg/sqcm,capacity 6000 LPHtreatment plant of any description carefully and removing out to distance 50 Mtrs away from installations, including cleaning, washing inside of filter including painting Inside, replacement of UNSV PVC threaded hose pipe, rubber washers, Nuts & Bolts , testing and commissioning complete all as specified and directed. 69 Supply and fix and levelling gravel of size 20 x 12mm thickness as per OEM design for forming media filter of filter beds/bio filter complete all as specified andas directed . 70 Supply and fix and levelling gravel of size 12 x 6mm thickness as per OEM design for forming media filter of filter beds/filter complete all as specified andas directed. 71 Supply and fix and levelling gravel of size 6 x 3mm thickness as per OEM design for forming media filter of filter beds/filter complete all as specified andas directed . 72 Supply and fix and levelling gravel of size 3 x 1.5mm thickness as per OEM design for forming media filter of filter beds/ filter complete all as specified andas directed . 73 Supply and fix and levelling ferrimenix (MNO2) compound as per OEM design complete all as specified and directed. 74 Supply and fix and levelling Activated carbon (Arthritic coal) as per OEM design for forming media filter of filter complete all as specified andas directed . 75 Supply and fix and levelling fine sand of size 0.45mm to 1mmas per OEM design for forming media filter of filter beds/bio filter complete all as specified andas directed .
Contract Date: Oct 31, 2025 Contract Value : ₹ 38.12 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Assam View Result →
49.
Housing Urban and Rular Development #8186196 AOC
Engaging Essential Service To The Maintenance Of 116 At Rajakulipet, Chengalpet For The Period From 01.11.25 To 30.4.26; 1 Maintenance of Engaging Essential Service to the 116 MSB flats in S.No. 42pt of Rajakulipet, Chengelpet from 01.11.2025 to 30.04.2026 by engaging the required and properly trained Plumber cum Electrician for lifting water from sump, well or bore ,well to the over head tank in each block, maintenance of pump sets, attending the repair works in water supply and sanitary line and removal of blockages in water closets, inspection chambers and gullies, attending electrical fault in wiring and electrical installations in the flats, replacing the bulb in common areas, sweeping the common areas including clearing the cowdung and clearing of vegetations, bushes and jungle clearance in and around the scheme area, desilting and cleaning the storm water drains and removal of debris away from the schme area, maintaining the avenue trees, and garden plants and to maintain the scheme area in a neat and tidy condition, operating to lift smoothly without any complaints from the residents of the scheme and also staying in the lift itselfas per time schedule indicated, etc., complete in all respect and as directed by department officers. 2 Plumber cum Electrician 3 Sweeper cum scavenger 4 Pump Operator 5 Providing Security arrangements for the Maintenance of 116 MSB flats in S.No. 42pt of Rajakulipet, Chengelpet from 01.11.2025 to 30.04.2026 with necessary regular day and night watchman and to safe guard the installation such as pump sets, generators, fire service equipments, common lights, etc all complete and as directed by the departmental officers. 1st shift - 6.00 am to 2.00 pm, 2nd shift - 2.00 pm to 10.00 pm & 3rd shift - 10.00 pm to 6.00 am
Contract Date: Oct 31, 2025 Contract Value : ₹ 13.46 Lakh
Government Departments No of Bidders 2
Tamil Nadu View Result →
50.
Housing Urban and Rular Development #8182276 AOC
Engaging Essential Service to the Maintenance of 120 Residential building (MIG) with Stilt + 5 floors at Kalaivanar Street, Jafferkhanpet, Chennai - 600083,comprised in T.S.No.47/1(Pt.), of Block No.133 of Kodambakkam Village, MambalamTaluk, Chennai District. Division no. 138 Zone - X, of Greater Chennai Corporation from 01.11.2025 to 31.03.2026 (5 Months); 1 Maintenance of Engaging Essential Service to the 120 Residential building (MIG) with Stilt + 5 floors at Kalaivanar Street, Jafferkhanpet, Chennai District for the period from 01.11.2025 to 30.03.2026 by engaging the required and properly trained Plumber cum Electrician for lifting water from sump, well or bore ,well to the over head tank in each block, maintenance of pump sets, attending the repair works in water supply and sanitary line and removal of blockages in water closets, inspection chambers and gullies, attending electrical fault in wiring and electrical installations in the flats, replacing the bulb in common areas, sweeping the common areas including clearing the cowdung and clearing of vegetations, bushes and jungle clearance in and around the scheme area, desilting and cleaning the storm water drains and removal of debris away from the schme area, maintaining the avenue trees, and garden plants and to maintain the scheme area in a neat and tidy condition, operating to lift smoothly without any complaints from the residents of the scheme and also staying in the lift itselfas per time schedule indicated, etc., complete in all respect and as directed by department officers. 2 Plumber cum Electrician 3 Sweeper cum scavenger 4 Providing Security arrangements for the Maintenance of 120 Residential building (MIG) with Stilt + 5 floors at Kalaivanar Street, Jafferkhanpet, Chennai District for the period from 01.11.2025 to 30.03.2026for the period from 01.11.2025 to 28.02.2026 with necessary regular day and night watchman and to safe guard the installation such as pump sets, generators, fire service equipments, common lights, etc all complete and as directed by the departmental officers. 1st shift - 6.00 am to 2.00 pm, 2nd shift - 2.00 pm to 10.00 pm & 3rd shift - 10.00 pm to 6.00 am
Contract Date: Oct 31, 2025 Contract Value : ₹ 9.90 Lakh
Government Departments No of Bidders 2
Tamil Nadu View Result →
TenderDetail
Loading tenders