View Bid Results For Automatic Warning System Tenders

We found 132 Bid Results related to automatic warning system tenders. You can find Contractor details who won automatic warning system tenders along with contract details in Bid awards announcements section.

Indian Tenders
10
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
102
20
10
Tender Publishing Platform
20
112
State / UT
31
19
12
12
11
9
7
6
6
5
4
4
4
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
Contract Value
35
24
44
29
Publish Date
0
0
0
0
0
Sector
24
27
19
18
13
10
8
5
5
4
3
3
2
2
2
2
1
1
1
1
1
1
1
1
1
Ownership
5
59
40
26
6
1
Within keyword
Active filters:
Showing 1–3 of 132 tenders matching your filters
1.
Environment and Forests #11416980 AOC
Tender For Solar Fencing Work- 1 Supply Of Powerfence Energizer (10Kv)Of Standard Make Conforming Tonimpulse Repetition Period Greater Than Or Equal To 1 Second And Impulse Duration With 500 Ohm Load Of About 5 Joules And Capable Of Energizing Over A Distance Of 2 Kilometers.-3 Year Warranty 2 Suply Of Crystalline Silicone Terrestrial Photo Voltanic Module Conforming To Ilc 612115/Is 14286 With Peak Wattage0F 150 Watts Carrying The Name Of The Manufature Of Pvmodule And Manufacturer Of Solar Cells-3 Year Warranty 3 Supply 12 V Battery To Be Charged With Solar Photo Voltanic Module With Rated Capacity Of 100 Ah Generally Lead Acid Tubular Battery For Energizing The Energizer. -5 Year Warranty 4 Supply Of Charge Controller Unit(10 Amp) Of Standard Make Suitableto Control The Charging Of The Tubular Battery. Automatic System 5 Supply Of Lightning Diverter Of Standard Make Having Capacity To Divert Up To 20 Kv 6 Supply Of Intermediate Posts Including Cost Of T Angle,Cutting,Welding And Painting Charges (8 Ft, 25Mmx25Mmx3Mm) 7 Supply Of Corner Posts Assembly Including Cost Of Gi Pipe,Cutting, Welding And Painting Charges (8Ft Gi 2\ 14 Guage) 8 Supply Of Support Post To The Corner Post Made Of Gi Pipe, Cutting,Welding And Painting Charges (8 Ft Gi 1.5) 9 Supply Of Ht Wire Of Standard Make 2.59 Mm Size (12Gauge) Zinc Coating For Use As Conducting Wire. 10 Supply Of 14Gauge Wire, High Tensile, Zinc Coated For Winding The Pp Reel Insulator Etc. (14 Gauge) 11 Supply Of Lead Out Cable-Double Insulated Inner Core Wire Of Withstanding 15 Kv Voltage For Connecting Purposesuper Strain Insulator Made Of Virgin Polymer Uv Stabilized Eire Resistant 12 Supply Of Super Strain Insulator Made Of Vergin Polymer Uv Stabilized Fire Resistant And Suitable To Withstand 15 Kv Voltage. 13 Supply Of Pp Reel Insulator Madeof Virgin High Density Poly Propylene With Break Down Voltage Of 15 Kv 14 Supply Of Tension Spring Made Of Hot Dipped Steel Of Standard Make 15 Supply Of Wire Tightner Made Of Aluminium-Silicon Alloy 16 Supply Of Warning Signs Made Of Long Standing Polymer Sheet Of Yellow Colour With Black Lettering 17 Supply Of Rope Gate Set Consisting Of Steel Rope Of 5 Meters Along With One Super Strain Insulator, Insulated Handle And Hook Assembly. 18 Supply Of Earth Device Consisting Of Steel Rod With Earthing Mixture - Bentonite Clay (1.5\Pipe) 5 Feet Length. 19 Supply Of Base Unit Box For Housing Energizer Battery, Charge Control Unit Etc. Body Of Which Is Made Of Alumminium Plate, Painted Coated Provided With Stand Of 1 Meter Height Made Of Four Legs Of Mspipe Of 25Mmor Ms 25Mm X25Mm X 3Mm Or Single Leg Of Painted Ms Pipe Of 50Mm Diameter.
Contract Date: Jul 06, 2026 Contract Value : ₹ 2.11 Lakh
Government Departments No of Bidders 5
Kerala View Result →
Tamil Nadu View Result →
Jammu And Kashmir View Result →
4.
Banking and Finance #11236945 AOC
Bids Are invited for Loss Prevention Active And Passive Fire Protection Systems Fire Door - Providing, Fixing, Testing And Commissioning Of Two Hour Fire-Rated Single/Double Panel Door & Door Frame According To Approved Design & Shop Drawing Door Frame Made Using 1.2 Mm Thick Galvanized Steel Sheet Conforming Is 277 For Formed To Single Rebate Profile Of Size 100Mmx50mm & With Maximum Bending Radius Of 1.4 Mm. Door Frame With Mitred Joints To Have 40Mm Width All Around The Lobby Side. Frame To Be Provided With Back Plate Bracket For Installation Using Anchors. The Frame To Be Fixed Using 8Mm Expansion Anchors (Hilti/Equivalent) As Per Approved Design. Rate To Also Include Providing, Erecting & Fixing Single/Double Leaf Minimum 44Mm Thick Metal Finish Door Shutter Constructed From 0.8Mm Thick Galvanized Steel (Gpsp) Sheet Conforming Is 277, Fully Flush, Double Skin Door Shell With Lock Seam Joints And Stile Edges, Internal Reinforcements Provided At Top, Bottom & Stile Edges For Fire Rating. The Internal Construction Of The Door Should Be A Resin-Bonded Specially Designed Honeycomb Structure With Reinforcements At Top, Bottom & Stile Surrounds. Doors Shall Be Factory Prepped For Receiving Specified Hardware. Vision Panel, Where Specified, Shall Be 6Mm Thick Clear 2 Hour Fire Rated Glass. The Door Assembly Shall Be Fire Rated For 120 Minutes , A - Double Door , B - Single Door , Fire Rated Paint - Fire Rated Paints For All Partition Wall Are Specialized Intumescent Coating That Swell When Exposed To High Heat, Forming A Thick, Char-Like Barrier For 30 To Over 120 Minutes. Ensure The Paint Complies With Local Fire Safety Codes, Such As Bs 476, Din En 13501,Or Astm. Varies By Product With Some Providing 10-12 Sq.M/Ltr. , Fire Suppression System - Supplying, Installation, Testing And Commissioning Of 58.5Kg Cylinder/Valve Assembly. , B - Supplying, Installation, Testing And Commissioning Of Novec 1230 - Agent Filled In The Above Cylinder. , C - Supplying, Installation, Testing And Commissioning Of Master Valve With Automatic Cum Manual Actuator, Including Trim Complete With All Accessories. , D - Supplying, Installation, Testing And Commissioning Of Slave Valve With Actuator, Including Trim Complete With All Accessories. , E - Supplying, Installation, Testing And Commissioning Of Actuation Hose , F - Supplying, Installation, Testing And Commissioning Of Discharge Hose , G - Supplying, Installation, Testing And Commissioning Of Nrv , H - Supplying, Installation, Testing And Commissioning Of 58.5 Kg Cylinder Strap. , I - Supplying, Installation, Testing And Commissioning Of Nozzles , J - Supplying, Installation, Testing And Commissioning Of Warning Sign Stickers. , K - Supplying, Installation, Testing And Commissioning Of Astm Schedule 40(Seamless Pipe) (A106 Grade B) , K I - I) 25Mm (6.2 Mm) , K Ii - Ii) 32Mm (Header) (8 Mm Minimum) , Fire Alarm And Detectors - Supply, Installation, Testing & Commissioning Of 1 Zone Gas Release Panel (Control Panel) , B - Supply, Installation, Testing & Commissioning Of Smoke Detector , C - Supply, Installation, Testing & Commissioning Of Abort Switch. , D - Supply, Installation, Testing & Commissioning Of Manula Call Points. , E - Supply, Installation, Testing & Commissioning Of Electronic Strobe With Hooter. , F - Supply And Laying Of Frls Armoured Cable 2Cx1.5 Sqmm , Portable Fire Extinguishers - Supply And Installing Isi Marked As Per 15683 Fire Extinguisher, Carbon-Di-Oxide Type Capacity 4.5 Kgs Complete In All Respect. , B - Supply And Installing Abc (Powder Type) Fire Extinguisher Mild Steel Cylinders Isi Complete Confirming To Is 15683. , C - 6 Kgs. , D - 2 Kgs. , E - Supply, Installation, Testing And Commissioning Of Exit Sinage Of Photo Luminescent On Aluminium Sheet Of 1.0 Mm Containing Lumigen-Iii As Base Chemical, Covered With Uv Stabilized Coating Size 450 X 200. Total Quantity : 1003
Contract Date: Ref. Documents Contract Value : ₹ 8.71 Lakh
Government Departments No of Bidders 3
Haryana View Result →
Maharashtra View Result →
6.
Heavy Industries and Public Enterprises #10888526 AOC
Bids Are Invited For Custom Bid For Services - Amc For Automatic Fire Detection And Warning System Attested/Notarized Copy of Work Order meeting similar works as specified in PQC with Scope of Work, Special Conditions of Contract and Schedule of Rates/Bill of Quantity Attested/Notarized Copy of Work Completion Certificate/Part Completion Certificate against above Work Order Attested/Notarized Copy of Audited financial statements/profit & loss accounts of the last three Financial Years, duly certified by a Chartered Accountant or Annual Report indicating annual turnover. Attested/Notarized Copy of audited balance sheet for the last Financial Year duly certified by a Chartered Accountant. EMD Amount in form of RTGS/NEFT/DD/BC/BG as per NIT specification / Copy of EMD exemption Certificate like UDYAM/NSIC. UDYAM/NSIC Certificate (if regd. with MSME) Attested/Notarized Copy of Independent E.P.F. A/c CODE of Bidder Attested/Notarized Copy of Independent E.S.I.C. A/c CODE of Bidder Copy of PAN Card of bidder Copy of GSTIN of bidder Solvency Certificate from a Bank Copy of Proprietorship deed/ Partnership Deed / Article & Memorandum of Association of the bidder Copy of Power of Attorney of the signatory of the bid, if signed by other than proprietor Pre-Contract Integrity Pact duly filled in & signed in all pages Tender Document duly digitally signed Filled-up Internet Banking / R.T.G.S. Banking mandate form (Annexure-V) Declaration form duly filled in & signed by authorized signatory of Bid (Annex-III) Undertaking letter on downloaded tender documents duly filled in & signed by authorized signatory of Bid (Annexure-VI Total Quantity :
Contract Date: Ref. Documents Contract Value : ₹ 59.65 Lakh
Boards / Undertakings / PSU No of Bidders 3
Odisha View Result →
7.
Drinking Water Supply and Sanitation #10490367 Price Bid
Nit No. 18(21-22)/Cwa(Wns)Ii Hp/Item No. 01 Sitc Of Fume Hood X 1, Body Shower And Eye Shower For Quality Control Laboratory, Haiderpur (Iso-9001-2015 Certified). , Ducted High Performance Fume Hood Specifications A Fume Hood Sometimes Called A Fume Cupboard Or Fume Closet Is A Type Of Ventilation Device That Is Designed To Limit Exposure To Hazardous Or Toxic Fumes In Lab Environment. It Bypasses All Toxic Fumes From Lab By A Duct. Internal Material Of Fume Hood Is Made By 6 Mm Phenolic Resin Laminate Which Has A Very Good Chemical Resistance Properties And Outer Body Also Made By Gi Sheet With Epoxy Powder Coating. The Size Of Fume Hood Varies As Per The Requirement Of User And It Starts From 1200Mm, 1500Mm, 1800Mm And So On. Internal Size Also Varies In Same Manner. Moc Also Can Be Changed As Per The Criticality Of Chemicals That A User Is Using In Their Labs. In Conclusion We Can Shay That Fume Hood Is Safety Equipment Which Is Necessary For A Lab To Make A Healthy Environment. Overall Dimensions With Base Cabinet:1800 Mm W X 1000 Mm D X 2400 Mm H Fume Hood Dimensions: 1800 Mm W X 1000 Mm D X 1555 Mm H Base Cabinet Dimensions: 860 Mm W X 600 Mm D X 655 Mm H With Castors – 2Nos Inside Fume Hood Working Volume: 1740 Mm W X 750 Mm D X 1180 Mm H Bed Size:1740 Mm W X 750 Mm D Quantity: 1. Model - High Performance Fume Hood 2. Design Basis-American Design Standard: Ashrae110-2016 All Tests Including “Tracer Gas Containment Test” Passed. European Design Standard: En-14175- 2003 ‘Inner Plane Containment Test’ Passed. 3. Design Structure-Aerodynamic, Floor Mounted 4. Airflow Type-Low Constant Volume (For A.C. Environment) 5. Colour Combination-(May Select As Per Our Standard Colour List) 6. Powder Coating -Complete Metallic Parts Are Processed With Multi Tank Pre- Treatment And Finished With Highly Corrosion Resistant Kansai Nerolac/Equiv Epoxy Powder Coating With 70 - 80 Microns Thickness. Our Automatic Coating Plant And Fully Conveyorized Ovan Ensures That Coating Surface Get Appropriate Temperature To Bond With The Surface. The Paint Surface Was Tested For Quality And Longevity Out Of Which 1000 Hours Salt Spray Test Is Important Factor. 7. Material Of Construction Of Superstructure-Galvanized Iron (Gi) As Per Is 277: 2003 Standard Of • 1.0 Mm Thickness For All Sheet Metal Paneling • 1.2 Mm For Back Pillars • 1.2 Mm For Front Corner Post 8. Front Top Panel -Easily Openable Hinged Gas Spring Based Top Panel For Easy Access To Flow Control Valve And Electrical Lighting Fixtures For Maintenance. 9. Corner Post -Triangular Profiled Corner Post Is Placed On Lhs And Rhs Of The Fume Hood And It Houses The Utility Line Fittings And Electrical Receptacles. 10. Inside Liner -Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels Made Out Of Durable Prl Integral Work Walls (6 Mm Thick). Astm Flame Spread Index < 25. 11. Active Kinetics Exhaust System -Interstitial 7-Point Active Kinetics Exhaust System (For Light, Normal & Heavy Fumes) With Baffle To Ensure Rapid Exhaust Of Fumes. 12. Airfoil -Aerodynamic Design, Horizontal Fixed Airfoil Mounted On The Worktop Made Of Ss 304 (1.2Mm) Teflon Coated. 13. Worktop -Chemical Resistant Splash & Spillage Proof Dished ‘Jet Black Granite’ Worktop (18 +1 Mm Thick). Skirting Of 15 Mm From All Sides For No Chemical Spillage. 14. Sink, Water Tap With Drain Arrangement -Worktop Will Have Sink Sealed With Silicon Sealant For Drainage With Water Tap On Left Back Side Of Worktop. Sink Will Have A Trap For Waste Collection. Oval Shaped 100 Mm X 200 Mm Sink 15. Sash (Shutter) -Vertical/Combinational Rising Sash Counter-Balanced With Pulley And Counter-Weight System. Toughened Float Glass Sash (5 Mm Thick). Smooth And Light Sash Operation. Clear Openable Height = 750 Mm. Impact Resistance Of The Sash (Toughened Glass) Is Four Times Higher Than Other Sash Materials (Like Safety Glass And Polycarbonate). Breaking Stress Value For Fully Toughened Glass (Tempered Glass) = 24,000 Psi. • Aerodynamic Sash Handle • Single Finger Movement • Timing Belt For Movement 16. Wet & Dry Services Valves-Remotely Operated Colour Coded Valves For Fine Control Over Utilities (As Per Din 12920 Norms) Total 5 Nos. Service Valves With Flexible Hose With 6Mm Internal Dia, Withstands Up To 5Kgf Pressure (All Lhs) • 1 For Raw Water (Pu) • 1 For Vacuum(Teflon) • 1 For Comp. Air (Pu) • 1 For Chilled Water Supply (Cws) • 1 For Chilled Water Return (Cwr) – No Valve Only Nozzle 17. Maintenace Ports -Openable Top Panel For Easy Maintenance Of Tube Light And Flow Control Valve. Rectangular Service Panel For Maintenance Of Utility Valves And Tubing. 18. Internal Nozzles-Brass Powder Coated Fittings Are Staggered In The Fume Hood To Avoid The Intermingling Of The Flexible Tubes. Also, The Taps Are Tapered In Shape To Use With Flexible Tubing Of Sizes From ¼” To ½” In Dia, To Provide Greater Flexibility To The User. 19. Lighting -Fluorescent Light (40 Watt, 2 Nos.) With Vapour-Proof Fitting For Proper Illumination. Intensity Approx 400 Lux At Worktop Level. Diffused Light Only, No Direct Lighting. 20. Electrical Utilities- 6 Nos. Electrical Sockets ‘North-West’ Make (230 V, 6/16 A, 50 Hz), 6 Nos. ‘North-West’ Make Mcbs. Light Switch On Front Fascia. Cables & Wires ‘Fire Retardant Low Smoke’ Grade. Emergency Stop Push Button For Fume Hood Switches. 21. Cable Entering Port -Dia 100 Mm Cable Entry Tunnel From Fume Hood Front Post To Inner Liner. With A Plastic Cover. For Easy Access Of Cables From Fume Hood To Electrical Sockets. 22. Chemical Storage Base Cabinet (Ventilated & On Castors) Base Cabinet Will Be Ready To Receive The Fume Hood At Its Top. It Will Have Following Features: 1) Completely Made From 1Mm Thick Gi Sheet With Highly Corrosion Resistant Epoxy Powder Coating,60-80 Microns Thickness. 2) Cabinet Integral Work Walls Will Be Special Chemical & Heat Resistant, Smooth Finish, Easily Cleanable Panels Made From Durable Prl Sheets. 3) Two Exhaust Ports Connected To The Fume Hood Exhaust System Internally. 4) One Removable Horizontal Partition To Store Chemicals. 5) Pp Trays For Chemical Storage. 6) Cabinets On Castors. 7) Roller Catch Of “Hafele”– Germany” Make For The Base Cabinet Doors. 8) Polyamide Hinges From Outside Of Base Cabinet.Overall Dimensions: 860Mm(W) X 600Mm(D) X 655Mm(H) With Castors – 2Nos. 23. Apparatus Holding Grid (Lattice Assembly)- A Grid Made Up Of Epoxy Powder Coated Rod (Dia. 12.7 Mm) To Hold The Apparatus. It Will Cover The Entire Length Of The Fume Hood And Will Be Built-In At Fume Hood Backside. Installed At The Distance Of 150 Mm From Backside Of Fume Hood. 24. Air Flow Meter -This Device Is An Accessory For Fume Hood To Indicate The Approximate Face Velocity Of Airflow With Primary Purpose Of Warning When A Low Flow Condition Occurs. Red & Green Leds Correspond To Low & Normal Flow Rates. When Flow Decreases From Normal To Low, An Audible Alarm Will Also Actuate Requiring Manual Acknowledgement For Silence. Digital Display Of Face Velocity In M/Sec Or Fpm. On Screen Display For Safe And Alarm Conditions With Audible Alarm And Led Indication. Push Button Calibration And Configuration. Plug-In Connections For Power Supply And Airflow Sensor 25. Temperature Indicator -Size 48 X 48 X 110, Mm (Panel Cutout - 44 X 44 Mm). Accuracy ±0.25% Of Reading ±1 Lsd, ±1°C Supply Voltage 85 To 264 V Ac, 50 / 60 Hz User Interface Display: 2 Rows Of 3-Digit X 7 Segment High Intensity Led Upper Row : Process Value For Pid 1 Lower Row: Process Value For Pid 2 Key Board: 3 Front Panel Keys For Settings 26. Level Adjusting Screws -Made Of Ss Bolts To Adjust The Fume Hood Level By ± 10 Mm 27. Exhaust Port -Unique Exhaust Port Design Ensures That The Fumes Will Be Exhausted Smoothly Without Any Turbulence At The Exhaust Port. Also, It Ensures Low Noise Level. 28. Flow Control Valve -To Regulate Airflow. 29. Noise Level - < 70Db At 1 Meter From Fume Hood. 30. Sash Lock -At 450 Mm To Restrict Movement Of Sash 31. Face Velocity -Should Pass Ashrae 110: 2016 Test At 60 Fpm 32. Drawer -Drawer Within The Fume Hood Structure To Keep Stationery 33. Pull Out Tray -For Keeping Notebook 34. White Board -300 Mm X 450 Mm White Board For Writing Centrifugal Blower: (For Air Suction In Cluster Of - Nos. Of 6 Ft. Fume Hood & - No. Of Spot Extractor) Silent Pp + Frp High Efficiency Remote Blower, Consisting Of Continuous Rating Motor And Chemical Resistant Impeller. It Satisfies International Safe Velocity Norms. 1. Construction-Sisw Type, Chemical & Heat Resistant Pp + Frp Blower With Aerodynamically Balanced Pp Impeller, With Drain Plug. 2. Air Suction Capacity -2400 Cfm Confirming To International Face Velocity Norms And As Per Safe Fume Hood Airflow Pattern. 3. Motor-‘Crompton / Lhp/Other Reputed’ Make, --Hp Motor 3 Phase Tefc, Ip 55, Class F, Continuous Rating. As Per Is 325. 4. Drive -Direct Drive Ducting: Chemical Resistant Pp + Frp (3Mm + 2Mm) Rigid & Flexible Ductwork From Fume Hood To Exhaust Stack Point With Weatherproof Canopy. Total Ducting With Horizontal, Vertical Members, Flanges, Bends, Bracketed Supports And Gooseneck Exhaust Stack. Installation : It Will Be Carried Out By Skilled Team With Ductwork Design, Fitting, Fixing Of Blower, Commissioning & Testing Of The Same At A Fixed Extra Cost Testing: All Fume Hoods Should Be “Factory Tested” As Per Ashrae110:2016 Face Velocity Norms. Also, “Onsite Validation” To Be Carried Out To Ensure Working Of Fume Hood As Per International Norms. “Tracer Gas Containment Testing’ Can Be Carried Out At Vendor’S Factory. , Supply Of Body & Eye Shower With Glass Bathing Enclosure And Ss Frame The Vendor Shall Provide Overhead Safety Shower Integrated With Eye Washer And Fume Hood With Installation And Also Do The Necessary Civil And Well As Wiring Work In A Scientific Required Manner. Specifications For Safety Shower Enclosed In Glass Shower Enclosure There Shall Be Safety Shower Cum Eye Washer For Decontamination Of Body In Case Of Any Toxic Or Chemical Contamination. It Shall Be Dual Operation With Hand Or Foot. The Same Will Be Enclosed In Glass Enclosure With Proper Water Supply System And Drainage System. The Height Of Shower And Bowl Will Be Adjustable. Material Of Construction: Shower: Ss 304 Basin Bowl: Ss 304 Shower Foundation: Ss 304 Filter Screens: Ss 304 Activation Push Plates: Ss 304 Piping: Ss 304 Waste Strainer: Ss 304 Water Flow Atomizer: Abs Dimensions: A. Total Height: 2445+-30Mm B. Shower Height 2100-2400Mm C. Eyewash Height 850-1150Mm D. Shower Bowl: 10.5/8” E. Eye Water Bowl: 11” F. Piping: ¾” Wall Thickness 2.5-3Mm G. Inlet: 1” Bsp, Outlet ¾” H. Ss Push Plate: 2 Mm Thickness I. Ss Pull Rod: 6 Mm Thickness J. Foundation Diameter: 165 Mm Water Flow: 1. Inverted Directional Laminar Flow. 2. Protects Nasal Cavity. 3. Filter Capsule Prevents Water Clogs For Uninterrupted Water Flow. 4. Attached Dust Cover (Ppcp). 5. Provided With Filter Capsule With Flow Controller (Pressure Range: 2.1-3Kgf/Cm2). 6. Provided With Ss Filter Screen To Protect From Unwanted Impurities. 7. Additional Flow Controller For Pressure Higher Than 3Kgf/Cm2 8. Under Conditions Of Adequate Pressure, Minimum Flow 11 L/Min. Receptor Bowl: 1. Straight Edged And Raised Basin To Prevent Splashing. 2. Ss Bowl Valve Equipped With Ss Ball And Steam Ss .304 (1/2 For Eyewash, 1For Shower). Drainage System: There Will Be A Rectangular Ss Drain Platform With Perforation. The Same Will Be Minimum 60% Of The Area Of The Enclosure Platform. This Is Need In An Scientific Manner To Flush Out The Water From The System In Seconds. Glass Enclosure: The Above Safety Shower Cum Eye Washer Will Be Enclosed In U Type-Glass Enclosure So At The Time Of Decontamination No Spill Spread Takes Place. The Glass Enclosure Will Have Tiles Of Good Quality At The Back Side And Three Side Glass That Include Gate (U Type). All Glass Will Be Toughened. Glass Thickness: 10 Mm Toughened (Tufnik Or Jaguar) Glass Door: 2135 Mm X 750 Mm (Minimum) Glass Enclosure Dimensions: 1066 Mm Width X 1220 Mm Depth X 2133 Mm Height Fittings, Hinges And Towel Bar Handle, L Connectors: Tufnik Or Jaguar Shower Cubical Size: As Per Site Requirement Over-Head Tank: 1000 Ltr (Syntex) Water Supply Fittings: Will Be Pp (Astral) Drain Pipes: Pvc (Astral/Prince) Installation Of Safety Shower And Fume Hood With Ducting, Electric Connections And Plumbing And Required Civil Work: It Will Be Carried Out By Skilled Team With Ductwork Design, Fitting, Electrical Work (All Wiring Will Be In The Concealed Conduit), Required Civil Repairs, Commissioning & Tetsing Of The Same. (Vendor May Visit The Site). The Whole Work Will Be Done Scientifically Keep In View All And Future Requirements Of Both The Systems. Between The Two Systems I.E. Safety Shower And Fume Hood There Will Be Backlit Glass/Acrylic Djb Logo And Lab Certifications. Civil Work:Demolition Of Existing Slab And Back Wall Tiles, Re-Plastering Of Back Wall And Tile Work. 10 X 18 Including Corner Of Another Wall (180 Sq Feet). Platform 10 X 5 Of 2 Height Where Safety Shower And Fume Hood Will Be Installed. Vitrified Tile Of Best Quality On Floor 12 X 6. There Will Be Black Granite On The Platform Front(12X2). The Plumbring Work That Include Installation Of 1000 Ltr Water Tank On The Roof Of The Lab, Connection Of Water Of The Systems, And Drainage From Safety Shower To The Drain As Per Specifications. , Demolition Of Existing Slabs, Tiles, Sink, Floor Tiles, Cupboard, Electrical Fixtures And Plumbing Fixtures , Installation Of Body Shower And Eye Shower With Glass Bath And Ss Frame , Installation Chemical Styorage With Fume Suction System Including Carriage. , Fixing Of Eye Shower With Complete Plumbing Work To Maintain Pressure From Djb Mainline Administration Block With Overhead Tank Including All Necessary Work. , Fixing Of Floor Tiles, Wall Tiles, Complete Electrical Work And Civil Cutting Of Window, Manhole With Cover Frame And All Other Necessary Jobs. , Testing & Commissioning With 365 Days Of On-Site Warranty
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Delhi View Result →
8.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
9.
Housing Urban and Rular Development #10427022 Price Bid
Construction Of Sump Well Pump Room And Sitc Of Rotary Lobe Pump Sets Along With Related Eandm Equipments At Rahim Khan Road Nizamuddin East New Delhi Under Ser-1 Civil And Electrical Work-SH-I Pump Set WorkSupplying, installation, testing and commissioning of Positive displacement Rotary Lobe Pump for draining/dewatering of storm water/sewer water compatiblefor VFD (variable frequency drive) having minimum discharge 500 m3 /hr at 68Hz and 170 m3/hr at 25 Hz for 10 mtr. head and 5 mtr. suction Lift capacity complete withGeared Motorwith minimum power 45 kW/60 HP, 4 Pole suitable for operation on 415 Volt 50 Hzas per additional specification etc. as required. 2 Supplying, fabrication & installation of45KW VFD AUTO CONTROL PANEL made out of CRCA sheet steel of thickness 2mm for load bearing members, 1.6mm for non load bearing section with necessary stiffeners as required. 3 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 4 250 m.m dia 5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required: 6 250 m.m dia 7 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 8 40 mm dia 9 80 mm dia 10 250 mm dia (wall thickness 6.3 mm) 11 450 mm dia (wall thickness 7.0 mm) 12 Fabrication, Supplying, Installation Testing & commissioning of automatic motorised Mechanical Coarse Bar Screen Suitable for channel dimension:i) Channel width: 1000mmii) Channel Depth: 3500 mmiii) Water Depth: 1500 mmiv) Bar Spacing: 20 mmv) Bar size : 12X6X50 mm vi) Angle: 75 Degreevii) MOC: SS304 Peak Flow/ Screen: 27MLDi/c Supplying, Installation, Testing & commissioning of 1No relay based control panel made out of 2mm thick CRCA sheet for 2Nos. Mechanical Coarse Bar Screen & 1No.Belt Conveyor etc. complete as required. - 13 Supplying, Installation, Testing & commissioning of Differential Level Sensorcomprises of Two Ultrasonic Level Sensors and One Differential Transmitter for Mechanical coarse bar screenetc. complete as required. 14 Supplying, Installation Testing & commissioning ofBelt Conveyor of size 600 mm width and2000mm Length i/c accessories for screen etc. complete as required. 15 Supplying, Installation Testing & commissioning of Gate Assy FG A101 Cast Iron Side Wall Embedded Oen Channel Gate (101) Size: 1000(W) X 1000 (H) mm Suitable for 1.75 m Seating water head (From invert Level) , Flush Bottom Closure Arrangement , Manually operated, Close Top Frame Gate etc. complete as required. 16 Supplying, Installation Testing & commissioning of Ultrasonic Level Transmitter with 4 ANSI PP Flange etc. complete as required. 17 Supplying, Installation Testing & commissioning of Local Control Stations for Pump Motors having following accessories i/c making connections etc. complete as required:a)DP MCB, 10kA, C-Curve for Control, 6A;: 1 No.b)Ampere meter, SIF-96, CI-1, Aux Supply 230V AC; 4-20mA I/P;1 No.c)Indicating Light-RED for ON;1 No.d)Indicating Light-AMBER for TRIP;1 No.e)Push Button with 1 NO contact - GREEN for VFD START;1 No.f)Push Button with 1 NC contact - RED for VFD STOP;1 No.g)Push Button with 1 NC contact - Mushroom head RED;1 No.h)Thermistor Relay 252 PMTG;1 No.i)Control Terminals, 2.5 sqmm; 6A;22 Nos. 18 SH-II Diesel Generator SetSupply, installation, testing and commissioning of Silent Type, CPCB IV + emission compliants Diesel Generating set having Prime Power Rating of 200 KVA, at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 Phase system & for 0.85 Load Factor with all necessary equipments and accessories and consisting of followings :(a)Diesel EngineDiesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C, 50 % RH & at 1000 meterMSL and conforming to BS 5514, BS 649, IS 10000(amended upto date), capable of taking 10 % overloading for 1 hourafter12hourofcontinuousoperation.Theenginewillbefittedcompletewithall accessories as per specifications .(b)Enginemountedinstrumentpanelfittedwithandhavingdigitaldisplayforthe following :-(i) Start stop switch with Key (ii) Water temperature indication (iii) lubrication oiltemperatureindication(iv)lubricationoilpressureindication(v) Batterycharging indication (vi) RPM indication (vii) Over speed indication (viii)Low lube oil trip indication(ix) Engine hour indication. 19 (c)AlternatorSynchronous alternator rated at 200 KVA, 415V, at 1500 RPM, 3 Phase, 50Hz, AC Supply with 0.8 lagging power factor at 40 Degree C, 50% Relative Humidity & at 1000m above MSL. The alternator shallbehavingSPDPenclosure,brushless,continuousduty,self-excitedandself-regulatedthrough AVR, confirming to IS: 4722 /BS : 2613suitable for tropical conditions and withF/H insulation.(d) Base Frame &foundation: Both the Engine & alternator shall be mounted on suitable baseframemadeofMSchannelwithnecessaryreinforcementwhichshallbeinstalledon suitablecementconcretefoundationandvibrationisolationarrangementasper recommendations of manufacturer.(e) Fuel Tank : Daily service fuel tank ofminimum 385 Ltr capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank & diesel engine with MS class C Pipe of suitable dia complete with valves, level indicators, and accessories as required as per specification.(f) Exhaust System : Dry exhaust manifold withsuitable exhaust residential gradesilencer . 20 (g) Starting system : 24V DC starting system comprising of starter motors, voltage regulator and arrangementforinitialexcitation,completewith suitableno. of batteries(25Plates,180 AmpsHour Capacitylead acid type) as required as per specification.(h) Acoustic Enclosure : Acoustic and weather proof enclosure with arrangement for fresh airintakeforcoolingoftheengineandalternator,extractiondischargeofhotairinto atmosphere as per specifications. 21 AMF Panel(i) Fabricating,Installation, Testing & Commissioningofautomaticmainsfailurecontrolincludingautobypasspanel,suitable for 200 KVAsilenttypeDGsetcompletewithrelays,timers,setofCTs,formeteringand protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH& Provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to Diesel Engine and elsewhere, if required, all complete and interlocking including the following :-(a) 3 nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release.(b)Auto / manual /test/off selector switch.(c) 2 nos. over voltage relay, 2 nos. reverse power relay and 2 nos. under voltage relay.(d)1 no. Auto mains failure relay(e) 3 sets of current transformer15P 10 accuracy for protection andclass 1, 15VA class-Ifor metering and. AMF Relay.(f) Energy analyzer unit to indicate current, voltage, frequency power factor and KWH.(g) Indicating lamps for load on mains and load on set.(h) Fuse for instruments.(i) Battery charger, complete with all accessoriesand Ammeter,voltmeter etc. 22 (j) Supply failure& restoration timer(k) Main supply failure monitor(l) Control unit with three impulse automatic engine start/stop and failure to start lock out.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator.(o)Aux. contactor 2NO+2NC(p) Audio/Video annunciation for :(i) High water temperature.(ii) Low lubricating oil pressure.(iii) Engine over speed(iv) Engine fails to start.(v) Full load/ Maximum load warning. 23 Main LT PanelSupplying, installation, testing & commissioning of LT panel of minimum front area 3.15 sq. mtr. and depth not less than 45 cm, made out ofCRCA Sheet Steel 2mm for section with necessary stiffeners as required. Free standing, self supported, floor mounting, single front, indoorinstallation, non draw out and compartmented. ISMC-100 fabricated channel frame with undrilled holes.Bottom with undrilled detachable 3mm gland plate as per order .Welding will be carried out with no external deposition of welded material in particular places and there will not be any gap between the welded materials.Siemens Grey RAL 7032CRCA Structures shall be pre-treated in seven tank chemical process, heated in baking oven.Minimum 60 micron of approved shade (RAL-7032).230V AC for Main LT Panel and Other Panels415+/- 5% , 50Hz+/-5%, 3 Phase 4 Wire 50KA – 1 Sec TPN Aluminum Electrolytic Grade ( E-91E) busbar shall be provided as per suitable sze, duly supported on SMC/DMC, busbar supports & insulated with color coded heat shrinkable sleeve. Power wiring will be through Vertical Bus -Bar and 1.1 KV grade PVC multistrand copper flexible cable . All control wiring will be done by 1.5 sq mm copper flexible PVC multi strand wire. CT wiring shall be carried out with 2.5 sq mm copper flexible PVC multistrand wire.1. All R,Y,B,N phases will be Red, Yellow , Blue & Black 2.All control wiring will be Grey colour. Earthing shall 24 be be with Green color wire.3.C.T. - Wiring through Red, Yellow, Blue, Black coloured wiring with shorting link type terminals.EPDM gasket provided at all joints, doors & covers to make panels dust & vermin proof (IP-52)Section-I(a) INCOMER :-1No. 4nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release. Ics=100%Icu i/c extended rotary handle and spreaders and all required accessaries Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch & back up HRC fuses/MCBs … complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set(b) 400 AOnload Change over SwitchIcs=100%Icu i/c extended rotary handle and spreaders and all required accessories- 1setIndicating lamp On, OFF, TRIP /R/Y/B/Ready to close complete 1set(c) OUT GOINGS:- 4Nos. 100A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etc complete as reqd. 25 Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch etc complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set3 Nos. 63A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etcwith indicating Lamps complete as reqd. 26 SH-III EI Work Supplying & Laying of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following size on cable tray as required. 27 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable (clamped with 40x3mm MS flat clamp) 28 3 X 50 sq mm (clamped with 25x3mm MS flat clamp) 29 Supplying, Laying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cableof 1.1 KV grade of following sizes on wall surface etc. as required. 30 4X25 Sq. mm. (clamped with 1mm thick saddle) 31 Supplying & Laying and fixing of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following sizedirect in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 32 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable 33 Supplying and Laying of XLPE insulated and PVC sheathed Copper conductor armoured Power Cable of 1.1 KV grade of following size on cable tray as required. 34 4x4 Sq.mm. 35 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 36 3½ X 240 sq. mm (62mm) 37 3 X 50 sq. mm (32mm) 38 4 X 25 sq. mm (28mm) 39 Supplying and drawing following size of PVC insulated copper conductor multicore cable of following size on cable tray as required. 40 10 core 1.5 sq.mm 41 24 core 0.5 sq.mm 42 4 core 0.5 sq.mm 43 2 core 1.5 sq.mm 44 6 core 0.5 sq.mm 45 3 core 0.75 sq.mm 46 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 47 100 mm width X 50 mm depth X 1.6 mm thickness 48 450 mm width X 50 mm depth X 2.0 mm thickness 49 EarthingEarthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 50 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 51 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithbrassnut,bolt,spring,washerexcavationandre-fillingetc.as required. 52 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 53 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithG.I.nut,bolt,spring,washerexcavationandre-fillingetc.as required. 54 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. asrequired. 55 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 56 Group C 57 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 58 3 x 4 sq. mm 59 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 60 25 mm 61 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 62 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 63 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 64 4 way (4 + 12), Double door 65 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 66 Single pole 67 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 68 63 amps 69 Supplying, Installation, testing & commissioning of weather proof LED Corrosion resistant battentype LED fitting of following wattagewith IP65 body made out of polycarbonate housing & opal diffuser with better thermal managementCCT-5700°KLumen Efficacy ≥110 Lm/W Power Factor≥ 0.95, CRI≥70, with constant current driver etc. complete as reqd. 70 36 Watt (4 feet ) 71 SITC of 450 mm heavy duty Exhaust Fan 1400 RPMsingle phase 240 Volt 50 Hz in the existing opening, complete with heavy duty louver/ shutter i/c making the hole to suit the size of the above fan, making good the damages, connection, testing, commissioning & earthing etc. as required 72 SITC of 600mmwall mounted fan having 3 nos. of blades, 1440RPM etc complete as reqd. 73 SH-IV AMCAMC for pump sets, Motor control panel and other accessories starting after satisfactory completion defect liability period from date of completion and commissioning of the pumping system.Annual Comprehensive maintenance for all 3 Nos. Pump sets, Motor, VFD Auto control panel, Mechanical Course Bar Screen, Differential Level sensor, Ultra Sonic Level Transmeter, Belt conveyor, Gate assembly including all accessories and consumables etc. all complete and as per site requirement as per Engineer-in-charge. 74 For 1st Year (Free Maintenance period) 75 For 2nd Year 76 For 3rd Year 77 Comprehensive maintenance of 200 KVA Silent type DG Set with AMF Panel. Annual Comprehensive maintenance of 200 KVA DG set and its accessories with AMF Panel i/c repairing, servicing, cleaning, checking and Descaling with replacment of following consumable parts i.e oil filter, fuel filter, air filters, coolant, lube oil, coolant filter, battery water, V Belts and batteries etc. complete and as per site requirement as per Engineer-in-charge. 78 For 1st Year (Free Maintenance period) 79 For 2nd Year 80 For 3rd Year 81 Civil WorkDemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 82 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 83 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 84 All kind of soil. 85 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 86 Providing and laying in position ready mixed or site batched design mix cement concrete for plai plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads: but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 87 Concrete of M10 grade with minimum cement content of 220 kg /cum 88 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 89 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 90 Suspended floors, roofs, landings, balconies and access platform 91 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick 92 Edges of slabs and breaks in floors and wallsAbove 20 cm wide 93 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slagcement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge;for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade withminimum cement content of 330 kg /cum 94 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 95 Thermo-Mechanically Treated bars of grade Fe-500D or more. 96 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 97 Cement mortar 1:4 (1 cement : 4 coarse sand) 98 12mm cement plaster of mix 1:4 (1cement:4 fine sand). 99 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 101 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 102 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre 103 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :Ordinary roack 104 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 105 Providing and fixing soil, waste and vent pipes : 100 mm dia. : 106 Sand cast iron S&S pipe as per IS: 1729. 107 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 108 Circular shape 450 mm dia 109 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 110 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 111 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 112 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 113 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm : 114 Sand cast iron S&S as per IS - 1729 115 Providing and fixing plain bend of required degree : 100 mm 116 Sand cast iron S&S as per IS - 1729 117 Providing and fixing single equal plain junction of required degree: 100x100x100mm, 118 Sand cast iron S&S as per IS-1729. 119 Providing and fixing terminal guard: 100mm : 120 Sand cast iron S&S as per IS:1729. 121 Providing and fixing collar:100mm : 122 Sand cast iron S&S as per IS:1729. 123 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 124 100mm : 125 Providing and fixing trap of self cleanising design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet and 100mm outlet : 126 Sand cast iron S&S as per IS:3989. 127 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 128 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 129 25mm dia nominal bore. 130 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tees including cutting andthreading the pipe etc. complete : 131 25 to 40mm nominal bore. 132 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 133 32mm dia nominal bore. 134 Providing and fixing C.P. brass bib cock of approved quality confirming to IS :8931 : 135 15mm nominal bore. 136 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931 : 137 15mm nominal bore. 138 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 139 25mm nominal bore. 140 Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats : 141 25mm nominal bore. 142 Providing and fixing brass ferrule C.I. mouth cover including boring and taping the main : 143 25mm nominal bore. 144 Providing and fixing unplasticised PVC connection pipe with brass unions : 45cm length : 145 15mm nominal bore. 146 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 147 Providing and fixing PTMT grating of approved quality and colour : Circular type : 148 100mm nominal dia. 149 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer : E.R.W. tubes. 150 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 151 Size of tile600x600mm. 152 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.Single socketed pipes : 153 110mm diameter. 154 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Bend 87. 5° : 155 110mm bend. 156 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Shoe (Plain) : 157 110mm Shoe. 158 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 159 Two or more coats on new work. 160 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : 161 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 162 Providing and laying in position ready mixedor site batched design mix cement concrete for plain cement concrete work;usingcoarse aggregateandfine aggregate derived from natural sources and usingrecycled concrete aggregate (RCA)as coarse aggregate and fine aggregate within thepermissible utilization,PortlandPozzolana / Ordinary Portland/Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concreteto improvedurability andworkabilitywithout impairing strength;including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering and finishingas per direction of the engineer-in-charge; for thefollowing grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level 163 Concrete of M25 grade with minimum cement content of 300 kg /cum.(Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 25% each). 164 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: 165 With 20x20 mm square bar 166 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 167 450 mm dia Ductile Iron Class K-9 pipes. *For use of bigger dia. pipes other than 450mm, net difference in basic rate as per applicable DSR shall be reimbursed to the contractor. 168 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) including applying of twice ( at base and top of mortar ) cement slurry @ 2.2kg/m2 (each time) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. 169 (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone. 170 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 171 Using rough Kota stone 172 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 173 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : 174 Red sand stone slab40 to 50 mm thick 175 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces 176 40 to 50 mm thick 177 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 178 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 179 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 180 Made of G.I. wire of dia 4 mm 181 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 182 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 183 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 Modified estimated cost after using correction factor on DSR-2023 on account of GST @0.973 vide O.M. dated 08.08.2024.(i.e. 9720555 *0.973 = 9458100 185 Carrying out structural analysis and design of all civil work, Design of all E&M works, foundation and superstructure of work such as pump-room, UGT and Delivery line upto Barapullah Drainage etc. all complete and submission of input data, check print structural drawing, 6 Nos. prints with soft copy of analysis and drawings as per direction of Engineer-in-Charge by approved structural consultant agency. The profile of structural consultant shall be got approved from NIT approving authority. The structural design shall be comprehensive to enable easy servicing of pumps and other heavy equipment’s etc. possible. The Hydrological data shall be provided to the consultant for drainage design.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
10.
Heavy Industries and Public Enterprises #10390733 AOC
Vertical Extension & Other Development Works at Academic Block Annex-2 Palayad Campus, Kannur University, Kannur, Kerala under PM-USHA scheme- 1 Civil work -General Structural work 2 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness 3 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter 4 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 5 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar 6 Core Cutting of RCC slabs(12cm Maxi.thickness) by using mechanical core cutting equipment of required diameter of the pipe in full depth etc to the satisfaction of engineer in charge including all cost and conveyance materials and labours charge etc complete (dia 80-200mm) 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 8 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. 9 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 10 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock 11 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 13 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 14 Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 15 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level 16 Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). 17 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 18 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 19 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 20 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 21 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 22 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges 23 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. 24 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 25 Block work & Finishing Work 26 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 27 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 28 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) 29 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 30 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 32 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats 33 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 35 Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. 36 Teracotta Clay Jali work, For Building work, minimum 7.5 cm thick as per approved design and pattern of Engineer in charge in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) with neat finish, polishing work all complete. 37 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wallwith suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channelof 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG),plaster board conforming to IS : 2095 : (part 3) 1996 (Board with BIS Certification marks) 38 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 39 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 40 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides 41 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness 42 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 43 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge. 44 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm 45 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 46 Joinery 47 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 48 Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge. 49 Providing and fixing factory made uPVC white colour casement/casement cum fixedglazedwindowscomprisingofuPVCmulti-chamberedframe,sashand mullion(whereeverrequired)extrudedprofilesduly reinforcedwith1.60+/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension,EPDMgasket,stainlesssteel(SS304grade)friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mmsizeforfixingframetofinishedwall,plasticpackers,plasticcapsand necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). 50 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness 51 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood 52 Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood 53 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc 54 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 55 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm 56 Providing and fixing CP Brass Handle 450mm in all types of doors with the necessary fittings and arrangements all complete. 57 Providingand fixing chromium plated brass handles with necessary screws etc. complete:200 mm 58 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality, with necessary screws etc complete as per direction of Engineer- in- charge. 59 French spirit polishing:Two or more coats on new works including a coat of wood filler 60 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece 61 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1800X2250 mm. 62 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1000X2200 mm. 63 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) 64 Providing and fixing SS H handle having min 45 cm length in toughed glass door including all necessary screws etc. complete. 65 Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete 66 Fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in- charge. 67 Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self- adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge. 68 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 69 Providing and fixing ball bearing for rolling shutters. 70 Sanitary and CP Fittings 71 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 72 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid 73 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 74 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 75 Providing and fixing ceramic urinal partitions of standard size as per direction of Engineer-in Charge and of approved shade 76 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 77 Providing and fixing uplasticised PVC connectionpipe with brass unions: 30 cm length15 mm nominal bore 78 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter 79 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore 80 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm 82 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm 83 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge. 84 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 85 Flexible pipe32 mm dia 86 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with C.P. brass screws and washers complete. 87 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 88 Providing and fixing SS grating of approved quality and colour. Rectangular type with openable lid150 mm nominal size square 100 mm diameter of the inner hinged grating. 89 Providing and fixing disabled friendly bathroom kit with all accessories including wash closet with soft close seat cover and cistern with twin flush setting, wash basin of min dimensions 510mm x 400mm with all necessary fittings including Angle cock, Connection pipe, waste pipe, Spatula Lever basin mixer, Wall mounted 600mm long, Wall mounted grab bar 600 mm long and wall mounted hinged rail 750 x 750, Health Faucet with angle cock. Recommended Makes : CERA , Hindware, Jaguar or equivalent . 90 Plumbing 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall32 mm nominal outer dia pipes 92 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall40 mm nominal outer dia pipes 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall50 mm nominal outer dia pipes 94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes 95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes 96 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore 97 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore 98 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore 99 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 100 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall 101 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall 102 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall 103 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow 104 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee 105 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer 106 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 107 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 108 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 109 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall 110 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend 111 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee 112 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl 113 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap 114 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow 115 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall 116 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 117 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee 118 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl 119 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap 120 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 121 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer 122 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore 123 Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 124 Yard Plumbing 125 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 126 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling 127 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 128 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single pushfit Coupler110 mm 129 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.50110 mm bend 130 Tile and Granite work 131 Providing and laying Matt Finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1200 x 600 mm. 132 Providing and laying Matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1200x600 mm 133 Providing and laying Anti Skid matt vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 134 Providing and laying premium vitrified bathroom wall tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 135 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm 136 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately).Area of slab over 0.50 sqm 137 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade. Area of slab over 0.50 sqm 138 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 139 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 140 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 141 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 142 Providing and fixing 12 mm thick gang saw cut, mat /rough finished granite, machine cut for steps, ramps or inclined plate form with raking and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 143 Structural steel 144 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 145 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 146 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 147 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 148 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 149 False ceiling 150 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board 151 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. 152 Rainwater Harvesting ,Fire Tank,Septic Tank 153 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock 154 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock 155 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 156 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 157 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level 158 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 159 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm 160 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. 161 Supplying and fixing C.I with frame for manholes: 600mm x 600mm ( heavy duty) the weight of the cover and frame shall not be less than 208 kg 162 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 163 Providing and placing on terrace (at all floor levels) Stainless Steel 304as per IS 5522:1992 of capacity 5000 Litreswith suitable fixing arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 164 Providing and fixing of Fire Rated door 1200x2100mm- Hollow metal fire doors at all levels from ISO 9001-2015 certified Manufacturer. Fire door should be as per NFPA 80 and NFPA 252. All fire doors should be tested at UL for 120 minutes and should pass both UL10B and UL10C. Doors shall be made from pressed galvanized steel confirming to IS277 as per following specification.Frame:Door frame shall be single rebate grooved profile of size 125 x 55 mm made out of 1.6 mm (16 gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate ANSI UL labeled hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant.Shutter: Door leaf shall be 46 mm thick fully flush double skin door without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet.The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI standard. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.Door and frames shall be finished Pure Polyester Powder coated and shall have passed minimum 500 hours of salt spray test.Vision glass: The glass shall be 5mm clear fire rated glass of equal rating and not exceeding size of 114 sq. inches.Door Hardware: Stainless steel Ball bearing Hinges 3 Nos, Minimum 90Kg hydraulic surface applied rack and pinion door closers, Mortice Sash Lock with cylinder. One Side Handle and Other Side with 2 point Panic Bar. 165 Road Work 166 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 167 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 168 Water proofing 169 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 170 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) 171 Landscaping 172 Supplying of Flowering Shrubs (Heliconiya st. Vincent red, Ixora bush, Cana durf etc..) 173 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removalof unsaverieable material?s as per direction of officer in charge (including cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) 174 Providing and Laying Landscaping of outdoor area with buffalo grass and small plants with all necessary levelling and filling as required. 175 Signage 176 Providing and fixing in position the signage board made out of 3 mm opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyl painted foam board of required size and colour. 177 Providing and fixing non lit Signages made of CNC Cut Stainless Steel projected letters and fixing it at site with all necessary fitting arrangements and accessories as per the design and requirement on instructions of the engineer in charge. 178 Furniture 179 Two tiered reagent racks (MS with powder coating) with granite top of 150 mm depth for side workbenches. The two tier should be placed at a minimum spacing of 300 mm. The item should be in compliance with IS 4209 (2013), NABL etc. The Length should be customized as per lab workbench and vertical posts must be placed at appropriate spacing. 180 Supply and Installation of Sink Module with SinkEach sink module should have a minimum dimension of 900 mm (L) x 900 mm (W) x 900 mm (H) and made of MS as per IS 1730 shall be designed with a single cabinet (with 2 shutter, SS304 hinges for easy and noiseless opening and closing mechanism). This module should include a sink made of 5 mm thick polypropylene with black color body. Minimum Dimension of the sink: 450 mm (L) x 600 mm (W). Sink should include PVC tap connection-15mm diameter (Goose neck type), grating etc. The sink module shall be portable and provided with 18mm thick granite table top (with cut out for providing sink). Item to be inclusive of all necessary fitting arrangement.The item should be in compliance with IS 4209 (2013), NABL, WHO etc. 181 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 750 mm D 182 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 890mm D 183 Supply, Installation, Testing and Commissioning of Eye wash with Brass inject mould with epoxy powder coated body with auto released Valve and cup shaped water dispenser with min 1/2 HP power pressure booster pump 184 Counter Height Stools :Supply and erection of counter height stools ( bar stools ) of following specifications : Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion. Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. 185 Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm) 186 Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 187 Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 188 Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick Multi wood board with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate: Greenlam/ Merino / Century. Only front elevation will be measured. 189 Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape. 190 Table of size Min 2300x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour. 191 Supply of wooden table with one drawer and Cupboard unit made of hard wood varnishing/painting all complete. Size: 1200x600x750mm 192 Providing & supply of Conference Table with executive chair of 13 Pax with the following specifications.Table top size :3600 x 1200mm. Table Tops –made of 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics & long lasting use. Under structure – Legs made of 25 mm thick standard Black matt colour post formed panels interconnected with 18mm thick standard Black matt colour pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management & Concealed wire management to take care of basic wiring requirements both horizontally & vertically. For closed configurations, liftable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager, popup grommet with power & RJ45 Socket. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs. 13 Nos Revolving adjustable type Medium height Back Office Chair with arm rest with back tilt and swivel mechanism constructed out of mild steel and high quality plastic. 193 Supply of wooded Chairs with armrest of Hard Wood Plank Seat and Reaper Back. 194 Supply of Wooden Bench and Desk made up of Mahagani of minimum size - Bench Size :1 83x30X46cm Desk Size :183x41x75 cm 195 Supply and installation of steel podium made of SS304 with min dimensions 500mm X 450 mm X 1200mm and having a sloped top surface, and having a decorative/ plain front face all made of SS 304 as per the design and approvals of the architect/ Engineer - In - Charge 196 Wiring-General Electrical work 197 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 198 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 199 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 200 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 201 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 202 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 203 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 204 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 205 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 206 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 207 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 208 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 209 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 210 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm 211 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm 212 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair 213 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 214 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 215 Fixtures 216 Supply and Fixing suitable size modular GI box with cover in front on and providing and fixing 1 no RJ 45 including connections as required. 217 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 218 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 219 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet 220 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 221 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet 222 Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI > 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro or equivalent 223 Supply, conveyance and Installation of compact, 2 feet,10-15W,LED tube light with high lumen giving soft glare free light including all required mounting accessories, frames complete. (Philips/WIPRO/Havells or equivalent) 224 Supply, Installation of surface mounted LED Tubelight. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 30 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 25k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make - Philips, Crompton, Wipro, Havells 225 Supply, Installation of surface/recess mounted LED Round/Square luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 110 lumen/watt and Minimum system wattage of 10 -15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro 226 Supply, conveyance and Installation of compact 10-15W LED Bulkhead Light giving soft glare free, Cool White light & complete with electronic driver including all required mounting accessories, frames, complete ( Make: Philips/WIPRO/Havells or equivalent) 227 Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 228 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 229 Supplying, conveyance and Installation of 150-250 mm sweep,1350 rpm, 3 - 5 blade BLDC Exhaust Fan including frames and all mounting accessories complete.Recommended Make: Atomberg Efficio/Crompton Brisk Air 230 Supplying, conveyance and Installation of BLDC Type Wall Fan having 3 blade, 400 mm sweep, Speed 1350 rpm, Air Delivery 70 CMM minimum, Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Renesa/V-Guard ENVIRO WF BLDC/Havells Platina 231 Supply, Installation, Testing and Commissioning of 450 mm sweep, 900 rpm heavy duty exhaust fan with louver in existing opening including making good the hole to suite the size of above fan complete with connections using 3 core 1.5sqmm multi core pvc sheathed copper conductor cable etc as required. 232 SITC of skirting light fitting with white LED 3 module along with suitable size modular metal box with inner and outer plates with all accessories. 233 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 234 Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. lCD 235 Supply and installation of 2 Nos. 4 ft MS powder-coated hanging rods for tube lights, including supply and laying of 1.5 sqmm copper PVC insulated FRLS wire (3 runs: Phase, Neutral, Earth), necessary hardware (ceiling clamps, saddles, junction box, connectors), complete mounting, terminations, testing, and labour charges — complete in all respects. 236 Network and CCTV System 237 Supply of 16 ports Network Switch, Rack-mountable 10/100/1000 Mbps, Switching capacity 35.7 Mbps Features: Flow control, Layer 2 switching, auto-negotiation, auto- uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, Quality of Service (QoS) Power: AC 120/230 V (50/60 Hz) complete. Make D-Link/TP Link/Cisco or equivalent 238 Supply Installation Testing and Commissioning of 32 channel embedded Linux NVR (Network Video Recorder), must connect 32 channel IP cameras, Should support min 2 SATA HDD and each should support Min 2TB and must record video simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smart Event, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(HEVC)/H.264+/H.264, 2 Year Warranty, Image quality should be maintained throughout the warranty period. Make: CP Plus/Hikivision/Dahua or equivalent 239 Network Switch for CCTV. 16 Port PoE Switch 1000BASE-T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 16 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az) Make: CP Plus/Netgear or equivalent 240 Supply, Conveyance and Installing of 2MP IP Dome/Bullet Camera having Progressive Scan True Day and Night Colour IR Camera having effective pixel of 2 MP, Video frame rate of 2MP @30FPS, Minimum illumination of 0.01 [email protected], 0 lux@IR On, 20 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell or equivalent 241 Supply and fixing of 6U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete 242 Supply Installation Testing & Commissioning of 16 Port Loaded Cat 6 - U/UTP Modular Toolless Patch Panel having a metal structure enabling them to be durably fixed to the uprights of the 19 chassis. Include rear cable manager to hold cables without need for cable ties. The termination of I/0s shall be without any manual crimping tools. 243 Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete. 244 Supply and connecting 2 meter long CAT6 cable Patch cord having RJ45 connectors crimped at both ends, to the existing outlets as required. Make: D-Link/TP-Link or equivalent 245 Supply and Installation of LED Color display of minimum 32 inch screen, complete, UHD display Make: LG/Samsung/Panasonic or equivalent. 246 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 247 Supply, Installation and Integration of Dual Band WiFi Access Point on false ceiling along with accessories, having Fast Wireless Speed, simultaneous 2.4GHz 300Mbps and 5GHz, 867Mbps Dual Band connections for 1.2Gbps of total available bandwidth, Superior Coverage of Four Fixed External antennas provide stable wireless connections and optimal coverage, App Control, Interface of 1× 10/100 Mbps WAN Port and 4× 10/100 Mbps LAN Ports having Working Modes (Router Mode / Access Point Mode). Make: TP-Link/Netgear/DLink or equivalent 248 UPS 249 Supply, Installation, Testing and Commissioning of True on-line Double Conversion 10 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase – Three Phase with ground b)Voltage range 190 VAC – 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range – 200VAC – 240 VAC ) Frequency range – 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range – 200VAC – 240 VAC i)Frequency range – 50/60 Hz j)Voltage distortion – linear load <= 2% k)Voltage distortion – nonlinear load <= 5% l)Output waveform – pure sinewave m) Crest Factor – 3:1 Minimum Back up time : Continuous 30 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation &Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand 250 Cable Trays 251 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness 252 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness 253 Fan Clamp 254 Providing and fixing 16 mm S.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 255 DB and Switchgear 256 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 257 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 258 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 259 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 260 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 261 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 262 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 263 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 264 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 265 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 266 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 267 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 268 Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts C curve TP MCB complete with connections, testing and commissioning etc. as required. 269 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 270 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral 271 Earthing and Lightning Arrestor 272 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required. 273 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 274 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 275 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 276 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 277 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 278 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 279 Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 280 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 281 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 282 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 283 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 284 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) 285 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) 286 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) 287 Street Lights 288 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 289 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 290 Water Purifier 291 Supply and Installation of Water Purifier having Multi-Stage Filtration: RO (Reverse Osmosis), UV (Ultraviolet), UF (Ultrafiltration), Storage Capacity: 7-9 Liters, Purification Features: RO: Removes dissolved impurities, heavy metals, and salts.UV: Kills bacteria, viruses, and other microorganisms. UF: Filters out fine particles and microorganisms. Mineral Booster: Adds essential minerals to enhance water taste.TDS Controller: Adjusts Total Dissolved Solids for taste preference. ActiveCopper: Infuses copper ions into the water for added health benefits.Aqua Taste Booster: Enhances the taste and maintains optimum pH level. In-Tank UV Disinfection: Keeps stored water pure.Smart Display/Indicators: Alerts for filter change, UV fail, water level, and service needs. Super Fine Sediment Filter: Removes fine and coarse particulate impurities. Water Level Indicator: Monitors the purified water level in the storage tank. Make: Aquaguard Aura 7L/ Bluestar Aristo 7L/Kent Grand Plus ZWW 9-Litre/ LG 8L 292 LT Cabling and Termination 293 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 294 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 295 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp 296 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 297 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 298 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm 299 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) 300 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm 301 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm) 302 LT Panels 303 Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work. General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall befl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 400A 3kA 4 Pole MCCB - 1no Ics = 100% Icu rating Digital Voltmeter 0- 500V with selector switch & Digital ammeter (0-400A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 400A. Out going : 250A ,50kA 4 Pole MCCB - 2no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 304 Lift panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 40A ,16-25kA TP MCB - 6 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list.Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 305 Sub Panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required. Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch &Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 32A ,16-25kA 4 Pole MCCB - 4 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 306 SSB2- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 250A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-250A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 250A. Out going : 1) 63A ,16-25kA 4 Pole MCCB - 8 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 307 Transformer 308 Supply , Installation, Testing and commissioning of 500 kVA outdoor unitized substation with an 11kV/433V dry-type cast resin transformer and a 630A VCB typically includes a compact prefabricated design conforming to IEC62271-202 standards, offering IP53/IP23 protection, and featuring compartmentalized construction to prevent accidental entry into energized areas. The substation is designed to withstand electrical impulses, thermal, and dynamic stresses, ensuring reliable and robust performance with low power loss and noise levels. The installation involves placing the substation on a prepared concrete plinth, connecting high-tension (HT) and low-tension (LT) cables, and ensuring proper earthing and safety measures. The commissioning process includes testing the transformer, switchgear, and protection systems to verify operational integrity. Make: Unipower/Intrans/Voltamp 309 MSB and APFC Panel 310 Supplying, installation, testing & commissioning of cubical type MAIN SWITCH BOARD suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area 6 sq.mtr (Approx.) fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630 Amp capacity extensible type TPN aluminium alloy bus bars of height conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :- Interlocking:Electrical through advance contacts in MCCB/ ACB’s (incomers & bus couplers) and mechanical (castel key) interlocking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section.Interlocking b(I) Incoming : 2 Nos 800 Amps (DG and MAINS) each four pole ACB of fault breaking capacity 50 KA (Ics=Icu upto 433 V manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993 as amended up-to-date complete with following accessories for each MCCB(a) Independent manual spring closing mechanism- 1 No.(b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection- 1 set.(c) Digital* type Voltmeter (0-500 V), with selector switch & back up HRC fuses/MCBs-1 set. (d) Digital* type Ammeter (0-.600 Amp), with selector switch and one set of 3 nos. CT’s of ratio. 800/5A Class I accuracy and 15 VA burden- 1set. (Ratio to be fi lled up).(e) 3 Nos. Phase indication LED lamps with 2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.(f) Shunt trip coil 220 V A.C. (II) Bus Bars :TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec (II) Outgoing :(1) (a) 4 Nos. 250 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 250/5 Amps Nos. (c) Digital* type ammeter (0- 400 Ap) with selector switch set. (2) (a) 1 Nos. 200 Amp4 Pole MCCB for (Ics = 35 kA upto 433 V) (b) CT’s of ratio 200/5 Amps set (c) Digital* type ammeter (0- 250 Amp) with selector switch set. (3) 3 Nos 160 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 160/5 Amps set (c) Digital* type ammeter (0- 200 Amp) with selector switch set. The switchgears/measuring instruments shall be as per the Choice of the Engineer in charge. The panel shall be mounted on required structural steel supports and frames for mounting, the price quoted shall be inclusive of the same. The panel shall have suitable provision for connecting to the incoming cables of 3R x 400 sqmm XLPE Aluminium cables and shall be provided with necessary earth leakage relays as per the Inspectorate Norms. The panel shall be as per the IS standards and shall conform to all norms of EB/Inspectorate/CEA. Make of Switchgear : ABB/L & T/Schneider Electric/Siemens/Legrand 311 Design, Manufacture, Supply, Installation, Testing and Commissioning of Automatic Power correction Panel having Incomer: 250A, TPN MCCB, Digital Multifunction meter for V,A,F,PF With CTs CL:1 with RYB Indication lamps-1 Set 250A Aluminium bus bar with heat shrinkable insulation sleeves-1 set, Intelligent power factor controller with control MCBs etc. complete The panel shall comprise of suitable combination of capacitor banks upto a total of 100 kVAR and shall be designed as per the standards of Electrical Inspectorate/CEA. 312 DG and AMF Panel 313 Supply, Installing, Testing and Commissioning of & Silent Type& Diesel Generating set having CPCB IV+ acoustic enclosure having Prime Power Rating of 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel engine radiator cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display and necessary indication coupled to Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor. Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Daily service fuel tank of 440-460 litres capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (lead acid type) as required as per specifications. Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. 314 Design, Fabricating, Supply, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 500 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: (a) 1 Nos. 630 Amp., 50 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50-100% having adjustable OL & SC. Set at 350A (b) Auto/Manual/Test/Off selector switch (c) 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay. (d) 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering(e) Energy analyser unit to indicate current voltage frequency power factor and KWH(f) Indicating lamps for load on mains and load on set(g) Fuse for instruments(h) Battery charger, complete with transformer/ rectifi er, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.(i) Main supply failure monitor(j) Supply failure timer(k) Restoration timer(l) Control unit with three impulse automatic engine start/stop and failure to start lockout.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator(o) Audio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load/maximum load warning. AMF Panel shall be connected to Main Switch Board incomer with necessary interlocking arrangement to prevent simultaneous switching on of power supplies. All integration between Main Switchboard and AMF Panel is under contractor scope. 315 HT Cable 316 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 300 sq mm 317 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm 318 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm 319 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm 320 Air Conditioning Works 321 Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1 dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE 322 Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through 100mm PVC duct inside false ceiling. 323 Electrical Dismantling Works 324 Dismantling of existing outdoor transformer and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 325 Dismantling of existing DG set 100 kVA, AMF panel etc and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 326 Electrical Works- Fire 327 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm 328 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 329 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 330 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 331 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) 332 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) 333 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm) 334 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 335 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 336 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 337 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 338 First Aid Hose reel &Wet Riser system 339 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m 340 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 341 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe 342 Supply and fixing of Air release valve SS body of 25 mm dia (UL Listed). 343 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 344 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 345 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) 346 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) 347 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel 348 Hose Box - Supply, Installation, Testing and Commissioning of Hose Box -Double door - (cabinet) to accommodate Two pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of MS sheet, painted in approved red colour with glass fronted hinged doors and lock &key (UL Listed). 349 Supply and Installation of Fire Brigade Draw-out Collecting head of CI Body having gunmetal 63mm dia instantaneous male draw out confirming to IS:903 suitable to fit on 100mm dia pipe with necessary flanges, rubber gasket, nut & bolts and other items. 350 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 351 Fire extinguishers 352 Supply &installation of ISI ABC type fire extinguisher of 4 kgs. Make SAFEX/ MINIMAX / CEASEFIRE or equivalent(UL Listed) 353 Supply &installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 354 Supply & installation of water mist type fire extinguisher of 9 liters. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 355 Supplying & Installing of Clean agent based automatic modular fire extinguisher (ceiling mounted) suitable for A,B,C class fires & electrical fires, Capacity- 5Kg 356 Supplying & Installing of Mechanical Foam (Stored Pressure) Type fire extinguisher of 9L capacity with mounting clamp. ISI approved. Make : SAFEX/MINIMAX/CEASEFIRE or equivalent 357 Fire Pumps & Fire Panel 358 Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head 359 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 360 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)a.Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325.c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head 361 Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROLControl for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 362 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 150mm 363 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 80mm 364 Supply and Installation of 12V DC, 200Ah maintenace free battery suitable for Diesel Engine driven fire pump operation with required connect cable set, battery stand. 365 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 100mm 366 Signages 367 Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Staircase/FIRE/Fire Station/Fire Fighting Equipment/Fire Duct/ Fire Extinguisher/ Floor/Fire Command Centre/Fire Pump Room/ No Smoking / Danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ In case of the fire do not use lift, use stairs and other mandatory signages recommended by Fire Departments having dimension 30 cm x 15 cm complete inculding fixing mechanism. 368 Supplying and Installing in position the signages approved by Kerala state fire service - of minimum size 1ft x 1.5ft made out of PVC rigid sheet 3mm thick with computer cut PVC non- reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with mirror screws. with lettering- ASSEMBLY AREA 369 Signboards: Supply and Installation of Fire Escape Plan with fire fighting equipment location, exit in A3 Foam sheet with plastic lamination with necessory accessories to fix it on wall. 370 Supply and fixing in position & Fire Order& signage in suitable size made of high quality PVC foam sheet with photo luminescent lamination to make it glow automatically in the dark, with suitable arrangement to fix it on wall. 371 Supplying & fixing in position Assembly Point sigange in suitable size on aluminium composite panel with suitable stand to fix it on open area outside building. Assembly Point 372 Terrace pump 373 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head 374 Design, Supply, Installation, Testing, and Commissioning of an Automatic Terrace Fire Pump Panel, including:- IP54-rated enclosure with powder-coated CRCA sheet steel.- 32A 16kA MCCB, 15 HP-rated pump 3P contactor, overload relay, and pressure switch for automatic pump operation.- Auto/Manual selector switch, START/STOP push buttons, hooter, timer, and protection features (dry-run, phase failure, etc.).- Indicators (Power ON, Pump Running, Fault, Low Pressure), meters (Voltmeter, Ammeter with selector switches).- Copper wiring, termination, and provision for cable glands.- Installation, onsite calibration, and full functional testing for pressure-based automation. 375 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 376 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 377 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 378 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 379 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm dia 380 Pressure Guage-Supply, Installation, Testing and Commissioning of pressure guage, 4 & dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 381 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations (UL Listed).20 mm dia Make : Kartar/ Atom 382 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 383 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 384 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 385 Above Ground Piping 386 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia 387 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia 388 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia 389 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :250 mm dia (wall thickness 6.3 mm) 390 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia 391 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :200 mm dia (wall thickness 6.3 mm) 392 Supply and Installation of 80mm dia M.S. &C& Class Diesel Engine exhaust pipe duly insulated with 50mm thick Glass wool with 1mm thick aluminium sheet cladding with bellows, flexible joint, necessary support, making hole in brick wall for pipe installation.Pipe dia 80mm 393 Underground piping 394 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 150 mm. Make - TATA / JINDAL 395 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 200 mm. Make - TATA / JINDAL 396 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (1m below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 100 mm. Make - TATA / JINDAL 397 Valves, measuring devices & switches 398 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:200mm dia 399 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia 400 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 401 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia 402 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia 403 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia 404 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150mm dia 405 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 406 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 407 Pressure Gauge-Supply, Installation, Testing and Commissioning of pressure gauge, 4 dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 408 Supply and fixing of Air release valve Brass body of 25 mm dia (UL Listed) following IS standards, with required pressure rated. 409 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 410 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 411 MOEFA system, Automatic Detection & Fire Alarm System 412 Supplying, installing, testing and commissioning approved make Microprocessor based Multi-loop, Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 trouble events including1000 alarm log history events, Self Programmable alphanumeric keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 Loops. Each loop shall have a capacity of minimum 125 detectors & 125 other devices exculding 20% spare. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable of connecting to the cloud platform/solution. Complied to meet UL864, 10th Edition 6 Loop Networkable Addressable Fire Alarm Control Panel(Make: Honeywell or Equivalent) 413 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 414 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 415 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 416 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 417 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 418 Supplying, Installation, testing & commissioning of external power supply unit provides regulated and filtered 24 VDC power for hooter operation.Battery backup with built in charging. 419 CABLING & WIRING Supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 420 Miscellaneous 421 Preparation of initial and final drawings, submission to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval, sanction and No Objection Certificate for building permit and completion from Fire Department and other department. Quoted rate shall be excluding statutory fee (All statutory fees shall be borne by Client-actual statutory fees shall be reimbursed on submission of original bill/challans from authorities).
Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore
Boards / Undertakings / PSU No of Bidders 1
Kerala View Result →
11.
Civil Aviation #10262204 Price Bid
Dsitc Of 06 Passenger Lift Including Aicmc For 05 Years At Mssr Station Berhampur.; 1 Design, Supply, Installation, Testing and Commissioningof following capacity Machine room less electric traction typeElevator suitable for following travel height, 5 stops & 5 openings [Ground floor, First floor,2nd floor , 3rd floor and 5th floor] and entrance at front side on all the serving floors, automatic centre opening stainless steel hairline finish door, car enclosure provided with stainless steel hairline finish panel on sides and with travel height of 15.5 Meters ( approx) andsuitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency type traction control, Speed of 1.00 Mtr/sec,electromagnetic brake system, simplex mode operations, operating panel with Braille Luminous buttons, overload warning indicator, battery operated alarm bell, LED typeemergency light, intercom suitable for hook up to AAI’s EPABX, infrared ray sensing door protection for suitalbe height, reverse phase relayon controller, fireman’s switch at ground floor, digital car positions indicator in car and at all positions indicator in car and at all floors with UP/DOWN direction, suitable protocol for BMS connentivity,light fixtures, ventilation fan, etc Complete withall accessoriesincluding Automatic Rescue Device(ARD) and Manual Rescue Device (MRD) in the event of power failure etc., and confirming to tender requirment. Capacity: 6 passenger (minimum capacity 408 Kgs),Floors: 06 Floor(G+05 & Each Floor height:3.1 mtr approx.), Travel height : 15.5 Mtrs(Approx)Stops & opening: 05 (Stops & Opening) 2 All Inclusive Comprehensive Maintenance Contract(AICMC) of 06 passenger Machine Room Less Lift for BOQ Item Number 1which include routine, monthly visit, preventive & break down maintenance including repair and replacement of all worn out items i/c batteries & mechanical damage parts with minimum downtime and warranty & guaranty of repaired and replaced items after completion of 01year defect liability period as per specifications given & as per direction of EIC. 3 First Year - 6.35% of SITC cost of Lift at BOQ Item No 1(After completion DLP of 01-Year) 4 Second Year - 8.45% on cumulative enhancement of 1st year cost shall be applicable for 2nd year. 5 Third Year - 8.45% on cumulative enhancement of 2nd year cost shall be applicable for 3rd year. 6 Fourth Year - 8.45% on cumulative enhancement of 3rd year cost shall be applicable for 4th year. 7 Fifth Year - 8.45% on cumulative enhancement of 4th year cost shall be applicable for 5th year.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Odisha View Result →
12.
New and Renewable Energy #10170087 Price Bid
Annual Rate Contract For Eimco Elecon Make Spares. , Annual Rate Contract For Eimco Elecon Make Spares. , Arm Assembly Part No-917A070000001 , Bush, Metric Part No-Mbh100 / 116 / 70A , Bush ( Metric ) Part No-Mbh100 / 116 / 50A , Pin Part No-917A060000007 , Lock Plate Part No-917A060000001 , Hex Socket Head Cap Screw Part No-370-2411 , Spring Washer Part No-Mdw12sa , Grease Nipple Part No-Bp1fg , Pin Part No-917A060000014 , Lock Plate Part No-917A060000005 , Hex Socket Head Cap Screw Part No-370-2311 , Spring Washer Part No-Mdw10sa , Bush Part No-Mbh125_135_101 , Lever Assembly Part No-917A070000002 , Bush ( Metric ) Part No-Mbh125 / 145 / 85A , Bush ( Metric ) Part No-Mbh90 / 106 / 100A , Pin Part No-917A060000008 , Lock Plate Part No-917A060000002 , Hex Socket Head Cap Screw Part No-370-2311 , Spring Washer Part No-Mdw10sa , Grease Nipple Part No-Bp1fg , Bush Part No-Mbh90_98_60 , Link Assembly Part No-917A070000006 , Pin Part No-917A060000009 , Lock Plate Part No-907A060000006 , Hex Socket Head Cap Screw Part No-370-2311 , Spring Washer Part No-Mdw10sa , Grease Nipple Part No-Bp1fg , Bush ( Metric ) Part No-Mbh90 / 106 / 60A , Push Plate Bucket Assy. Part No-907B070000063 , Bucket Lip Part No-Eea0032174 , Twisting Bumper Part No-19Wl429091510 , Spacer Part No-19Wl425091303 , Washer Part No-19Wl425091304 , Hex Head Screw Part No-Mt12lg40g , Plate Part No-Eea0005530 , Locking Ring Part No-Eea0002017 , Lock Ring Part No-Ssla020000023 , Push Plate Upper Mac. Part No-907B020000089 , Push Plate Lower Part No-907B020000090 , Pin, Push Plate Lower Part No-907A060000008 , Pin, Push Plate Upper Part No-907A060000009 , Hex Head Bolt Part No-Mt10lg65g , Spring Washer Part No-Mdw10sa , Hex Nut, Nyloc Part No-Mt10ln , Push Plate Cylinder Part No-907B050000080 , Tube S / A-2 Part No-Eea0032090 , Piston Rod S / A Part No-Eea0032091 , Head End Cover Part No-Eea0032092 , Piston Part No-Eea0028785 , Retainer Part No-Eea0028786 , Snap Ring Part No-Eea0028787 , Grub Screw, Piston Part No-Eea0024567 , Gub Screw Part No-Eea0023564 , Circlip Part No-Eea0022817 , Spherical Bearing Part No-Stdc003 / 036 , Grease Nipple With Cap Part No-Eea0020796 , Bush Part No-Eea0023556 , Piston Seal Ring ( * ) Part No-Eea0023563 , Piston Wiper Ring ( * ) Part No-Eea0023562 , Piston Rod O-Ring ( * ) Part No-Eea0023561 , Back Up Ring ( * ) Part No-Eea0023560 , O-Ring ( * ) Part No-Eea0023555 , O-Ring ( * ) Part No-Eea0023554 , Step Seal ( * ) Part No-Eea0023558 , Rod Seal ( * ) Part No-Eea0023559 , Wiper Seal ( * ) Part No-Eea0023747 , Seal Kit ( * Items ) Part No-Eea0032093 , Pin ( Bucket ) Part No-907A060000004 , Pin, Upper Push Plate Part No-907A060000007 , Pin Part No-917A060000010 , Bush ( Metric ) Part No-Mbh100 / 116 / 55A , Bush ( Metric ) Part No-Mbh90 / 106 / 100A , Spacer Part No-811A060000106 , Lock Plate Part No-907A060000010 , Grease Nipple Part No-Bp1fg , Hex Socket Head Cap Screw Part No-370-2309 , Hex Socket Head Cap Screw Part No-370-2311 , Hex Head Bolt Part No-370-0326 , Spring Washer Part No-Mdw10sa , Hex Nut, Nyloc Part No-Mt10ln , Front Frame Assembly Part No-917A070000003 , Locking Ring Part No-Eea0003926 , Pin Assy. Part No-917A020000001 , Pin Part No-917A060000017 , Chain Part No-103451 , Hex Socket Head Cap Screw Part No-370-2409 , Spring Washer Part No-Mdw12sa , Pin Part No-917A060000015 , Hex Socket Head Cap Screw Part No-370-2329 , Spring Washer Part No-Mdw10sa , Hex Nut Part No-369-0110 , Pin Part No-917A060000012 , Lock Plate Part No-907A060000011 , Hex Socket Head Cap Screw Part No-370-2311 , Grease Nipple Part No-Bp1fg , Pin Part No-917A060000013 , Lock Plate Part No-917A060000002 , Lock Plate Part No-917A060000004 , Pin Part No-917A060000011 , Spherical Bearing Part No-Stdc003 / 056 , Seal Part No-Seg251 , O Ring Part No-Seg1099 , Hex Socket Head Cap Screw Part No-370-2232B , Wear Washer Part No-912B060000117 , Plate Part No-Eea0024855 , Bush ( Metric ) Part No-Mbh70 / 82 / 100A , Bush Part No-Mbh100_110_64 , Bush Part No-Mbh100_110_68 , Bush Part No-Mbh90_100_78 , Bush Part No-Mbh90_100_82 , Wheel Arch Lh Part No-917A020000010 , Wheel Arch Rh Part No-917A020000011 , Guard Part No-917A020000012 , Clamp Part No-917A020000009 , Front Axle Part No-917B050000011 , Axle Housing Part No-Eea0025425 , Breather Part No-Eea0025426 , Screw Plug Part No-Eea0025427 , Sealing Ring Part No-Eea0025428 , Screw Plug Part No-Eea0025429 , Sealing Ring Part No-Eea0025430 , Axle Shaft Part No-Eea0025431 , Wheel Stud Part No-Eea0025434 , Ring Part No-Eea0025435 , Radial Seal Ring Part No-Eea0025436 , Radial Seal Ring Part No-Eea0025437 , Tapered Roller Bearing Part No-Eea0025438 , Tapered Roller Bearing Part No-Eea0025439 , Ring Part No-Eea0025440 , Nut Part No-Eea0025441 , Hexagon Socket Screw Part No-Eea0025442 , O-Ring Part No-Eea0025443 , Sealing Ring Part No-Eea0025444 , Inner Disk Part No-Eea0025445 , Outer Disk Part No-Eea0025446 , Brake Group Kit Part No-907A070000085 , Piston Part No-Eea0025447 , Gasket Part No-Eea0025448 , Gasket Part No-Eea0025449 , Brake Carrier Part No-Eea0025450 , Brake Housing Part No-Eea0025451 , O-Ring Part No-Eea0025452 , O-Ring Part No-Eea0025453 , O-Ring Part No-Eea0025454 , Hexagon Socket Screw Part No-Eea0025455 , Hexagon Socket Screw Part No-Eea0025456 , Face Seal Part No-Eea0025457 , Screw Plug Part No-Eea0025458 , Sealing Ring Part No-Eea0025459 , Bleeding Socket Part No-Eea0025460 , Sealing Ring Part No-Eea0025461 , Bleeder Valve Part No-Eea0025462 , Compression Spring Part No-Eea0025463 , Compression Spring Part No-Eea0025464 , Intermediate Piece Part No-Eea0025465 , Piston Guide Ring Part No-Eea0025466 , Warning Label Part No-Eea0025467 , O-Ring Part No-Eea0025468 , Thread Bushing Part No-Eea0025469 , O-Ring Part No-Eea0025472 , Cap Part No-Eea0025473 , Planetary Housing Part No-Eea0025474 , O-Ring Part No-Eea0025475 , Screw Plug Part No-Eea0025476 , Disk Part No-Eea0025480 , Hexagon Socket Screw Part No-Eea0025481 , Sun Gear Part No-Eea0025482 , Bushing Part No-Eea0025483 , Hexagon Socket Screw Part No-Eea0025484 , Ring Part No-Eea0025485 , Planetary Gear Part No-Eea0025486 , Disk Part No-Eea0025487 , Ring Part No-Eea0025488 , Needle Bearing Part No-Eea0025489 , Planetary Pin Part No-Eea0025490 , Locking Pin Part No-Eea0025491 , Ring Gear Part No-Eea0025492 , Ring Gear Carrier Part No-Eea0025493 , Retainer Part No-Eea0025494 , Hexagon Screw Part No-Eea0025495 , O-Ring Part No-Eea0025496 , Differential And Carrier Assembly Part No-Eea0025497 , Drive Pinion Part No-Eea0025498 , Ring Gear Part No-Eea0025499 , Differential Housing Part No-Eea0025500 , Differential Spider Part No-Eea0025502 , Differential Side Gear Part No-Eea0025503 , Differential Pinion Part No-Eea0025504 , Bushing Part No-Eea0025505 , Hexagon Screw Part No-Eea0025507 , Tapered Roller Bearing Part No-Eea0025508 , Tapered Roller Bearing Part No-Eea0025509 , Differential Carrier Part No-Eea0025510 , Hexagon Screw Part No-Eea0025511 , Setting Ring Part No-Eea0025512 , Lock Plate Part No-Eea0025513 , Hexagon Screw Part No-Eea0025515 , Hexagon Screw Part No-Eea0025516 , Bolt Part No-Eea0025517 , Bolt Part No-Eea0025518 , Hexagon Nut Part No-Eea0025519 , Tapered Roller Bearing Part No-Eea0025520 , Bushing Part No-Eea0025521 , Tapered Roller Bearing Part No-Eea0025522 , Bearing Flange Part No-Eea0025523 , Cover Part No-Eea0025524 , Radial Seal Ring Part No-Eea0025525 , Hexagon Screw Part No-Eea0025526 , Compensation Plate Part No-Eea0025527 , Drive Flange Part No-Eea0025528 , Adjusting Nut Part No-Eea0025529 , Bearing Part No-Eea0025530 , Circlip Part No-Eea0025531 , Circlip Part No-Eea0025532 , Outer Disk Part No-Eea0025534 , Inner Disk Part No-Eea0025535 , Disk Part No-Eea0025536 , Disk Part No-Eea0025537 , O-Ring Part No-Eea0025538 , Disk Part No-Eea0025539 , Disk Part No-Eea0025540 , Ring Part No-Eea0025541 , Axle Bolt Part No-917A060000019 , Clamp Plate Part No-917A020000008 , Hex Head Bolt Part No-370-0405 , Spring Washer Part No-Mdw12sa , Hex Head Bolt Part No-370-0310 , Spring Washer Part No-Mdw10sa , Hex Nut Part No-369-0110 , Lock Wire ( As Required ) Part No-L400 , Spring Washer Part No-Mdw24sa , Spacer Part No-Eea0025806 , Spacer Part No-Eea0032217 , Spacer Part No-Eea0027058 , Spacer Part No-Eea0027059 , Roll Back Cylinder Part No-917B050000093 , Tube S / A Part No-Eea0027156 , Piston Rod S / A Part No-Eea0027157 , Head End Cover Part No-Eea0027158 , Piston Part No-Eea0027159 , Circlip Part No-Eea0025685 , Sph. Bearing Part No-Eea0025686 , Grease Nipple With Cap Part No-Eea0025669 , Grub Screw Part No-Eea0025670 , Rod Wear Ring ( * ) Part No-Eea0025688 , Piston Seal-Glydring ( * ) Part No-Eea0025689 , Piston Rod O Ring ( * ) Part No-Eea0025690 , Piston Rod Backup Ring ( * ) Part No-Eea0025691 , Hec O Ring ( * ) Part No-Eea0025692 , Hec Backup Ring ( * ) Part No-Eea0025693 , Piston Wear Ring ( * ) Part No-Eea0025694 , Rod Seal-Bs Type ( * ) Part No-Eea0025677 , Rod Wiper-H860 ( * ) Part No-Eea0025695 , Stop Tube O Ring ( * ) Part No-Eea0025696 , Step Seal ( * ) Part No-Eea0025676 , Steel Ball ( * ) Part No-Eea0025679 , Counter Balance Valve Part No-Eea0027160 , Grub Csrew Part No-Eea0029180 , Seal Kit ( * ) Marked Items Part No-Eea0027161 , Lift Cylinder Part No-917B050000094 , Tube S / A Part No-Eea0027162 , Piston Rod S / A Part No-Eea0027163 , Head End Cover Part No-Eea0027164 , Piston Part No-Eea0027165 , Circlip Part No-Eea0025667 , Sph Bearing Part No-Eea0025668 , Grease Nipple With Cap Part No-Eea0025669 , Grub Screw Part No-Eea0025670 , Piston Wear Ring ( * ) Part No-Eea0025672 , Piston Seal, Glydring ( * ) Part No-Eea0025673 , O-Ring, Piston Rod ( * ) Part No-Eea0022809 , Piston Rod Back Up Ring ( * ) Part No-Eea0022810 , Hec O Ring ( * ) Part No-Eea0025674 , Hec Backup Ring ( * ) Part No-Eea0025675 , Step Seal ( * ) Part No-Eea0025676 , Rod Seal-Bs Type ( * ) Part No-Eea0025677 , Rod Wiper-860 ( * ) Part No-Eea0025678 , Steel Ball ( * ) Part No-Eea0025679 , Counter Balance Valve Part No-Eea0027167 , Seal Kit ( * ) Marked Items Part No-Eea0027168 , Rear Frame Part No-907C020000099 , Plate, Switch Mtg Part No-Eea0002375 , Coupling Part No-Stdd017 / 015 , Coupling ( 1Bsp ) Part No-Stdd017 / 16 , Clamp, Half Part No-912B060000098 , Hex Head Bolt Part No-370-0402 , Plate Part No-Eea0031318 , Hex Nut Part No-369-0116 , Bracket Part No-907A070000082 , Plate Part No-Eea0033367 , Flat Washer Part No-Maw10ga , Spring Washer Part No-Mdw10sa , Hex Head Bolt Part No-370-0306 , Threaded Boss Part No-Eea0033366 , Spring Washer Part No-Mdw10sa , Fuel Level Gauge Part No-912B050000314 , Plug Part No-1027A050000003 , Rear Axle Part No-917B050000012 , Axle Housing Part No-Eea0025425 , Breather Part No-Eea0025426 , Screw Plug Part No-Eea0025427 , Planetary Group Kit Part No-907A070000086 , Sealing Ring Part No-Eea0025428 , Screw Plug Part No-Eea0025429 , Sealing Ring Part No-Eea0025430 , Axle Shaft Part No-Eea0025431 , Axle Shaft Part No-Eea0025432 , Wheel Stud Part No-Eea0025434 , Hub Reduction Group Kit Part No-907A070000087 , Ring Part No-Eea0025435 , Radial Seal Ring Part No-Eea0025436 , Radial Seal Ring Part No-Eea0025437 , Tapered Roller Bearing Part No-Eea0025438 , Tapered Roller Bearing Part No-Eea0025439 , Ring Part No-Eea0025440 , Nut Part No-Eea0025441 , Hexagon Socket Screw Part No-Eea0025442 , O-Ring Part No-Eea0025443 , Sealing Ring Part No-Eea0025444 , Inner Disk Part No-Eea0025445 , Outer Disk Part No-Eea0025446 , Piston Part No-Eea0025447 , Gasket Part No-Eea0025448 , Gasket Part No-Eea0025449 , Brake Carrier Part No-Eea0025450 , Brake Housing Part No-Eea0025451 , O-Ring Part No-Eea0025452 , O-Ring Part No-Eea0025453 , O-Ring Part No-Eea0025454 , Hexagon Socket Screw Part No-Eea0025455 , Hexagon Socket Screw Part No-Eea0025456 , Face Seal Part No-Eea0025457 , Screw Plug Part No-Eea0025458 , Sealing Ring Part No-Eea0025459 , Bleeding Socket Part No-Eea0025460 , Sealing Ring Part No-Eea0025461 , Bleeder Valve Part No-Eea0025462 , Compression Spring Part No-Eea0025463 , Compression Spring Part No-Eea0025464 , Intermediate Piece Part No-Eea0025465 , Piston Guide Ring Part No-Eea0025466 , Warning Label Part No-Eea0025467 , O-Ring Part No-Eea0025468 , Thread Bushing Part No-Eea0025469 , O-Ring Part No-Eea0025472 , Cap Part No-Eea0025473 , Planetary Housing Part No-Eea0025474 , O-Ring Part No-Eea0025475 , Screw Plug Part No-Eea0025476 , Disk Part No-Eea0025480 , Hexagon Socket Screw Part No-Eea0025481 , Sun Gear Part No-Eea0025482 , Bushing Part No-Eea0025483 , Hexagon Socket Screw Part No-Eea0025484 , Ring Part No-Eea0025485 , Planetary Gear Part No-Eea0025486 , Disk Part No-Eea0025487 , Ring Part No-Eea0025488 , Needle Bearing Part No-Eea0025489 , Planetary Pin Part No-Eea0025490 , Locking Pin Part No-Eea0025491 , Ring Gear Part No-Eea0025492 , Ring Gear Carrier Part No-Eea0025493 , Retainer Part No-Eea0025494 , Hexagon Screw Part No-Eea0025495 , O-Ring Part No-Eea0025496 , Differential And Carrier Assembly Part No-Eea0025470 , Drive Pinion Part No-Eea0025498 , Ring Gear Part No-Eea0025499 , Differential Housing Part No-Eea0025500 , Differential Housing Part No-Eea0025501 , Hexagon Screw Part No-Eea0025507 , Tapered Roller Bearing Part No-Eea0025508 , Differential Carrier Part No-Eea0025510 , Hexagon Screw Part No-Eea0025511 , Setting Ring Part No-Eea0025512 , Lock Plate Part No-Eea0025513 , Hexagon Screw Part No-Eea0025515 , Hexagon Screw Part No-Eea0025516 , Bolt Part No-Eea0025517 , Bolt Part No-Eea0025518 , Hexagon Nut Part No-Eea0025519 , Tapered Roller Bearing Part No-Eea0025520 , Bushing Part No-Eea0025521 , Tapered Roller Bearing Part No-Eea0025522 , Bearing Flange Part No-Eea0025523 , Cover Part No-Eea0025524 , Radial Seal Ring Part No-Eea0025525 , Hexagon Screw Part No-Eea0025526 , Compensation Plate Part No-Eea0025527 , Drive Flange Part No-Eea0025528 , Adjusting Nut Part No-Eea0025529 , Bearing Part No-Eea0025530 , Circlip Part No-Eea0025531 , Circlip Part No-Eea0025532 , Nospin Differential Part No-Eea0025533 , O-Ring Part No-Eea0025538 , Disk Part No-Eea0025539 , Disk Part No-Eea0025540 , Credle Kit For Axle Part No-907A070000084 , Plate Part No-Eea0025542 , Ring Part No-Eea0025543 , Disk Part No-Eea0025544 , Disk Part No-Eea0025545 , Bushing Part No-Eea0025546 , Bracket Part No-Eea0025547 , Disk Part No-Eea0025548 , Plate Part No-Eea0025549 , Plate Part No-Eea0025550 , Plate Part No-Eea0025551 , Hexagon Screw Part No-Eea0025552 , Hexagon Screw Part No-Eea0025553 , Hexagon Screw Part No-Eea0025554 , O-Ring Part No-Eea0025555 , Grease Nipple Part No-Eea0025556 , Locking Pin Part No-Eea0025557 , Sunk Screw Part No-Eea0025558 , Hex Head Bolt Part No-917A060000023 , Spring Washer Part No-Mdw20sa , Dowelpin Part No-Mkb30m40 , Hex Head Bolt Part No-917A060000024 , Steering Cylinder Part No-917B050000008 , Tube S / A Part No-Eea0025637 , Piston Rod S / A Part No-Eea0025638 , Head End Cover Part No-Eea0022798 , Piston Part No-Eea0025639 , Circlip Part No-Eea0022800 , Spherical Bearing Part No-Eea0022799 , Grease Nipple With Cap Part No-Eea0020796 , Grub Screw Part No-Eea0022801 , Snap Ring Part No-Eea0025634 , Piston Wear Ring ( * ) Part No-Eea0022803 , Piston Seal ( * ) Part No-Eea0022802 , Piston Rod O Ring ( * ) Part No-Eea0022804 , Back Up Ring ( * ) Part No-Eea0022805 , O-Ring, Piston Rod ( * ) Part No-Eea0022809 , Hec B / U Ring ( * ) Part No-Eea0025698 , Rod Wear Ring ( * ) Part No-Eea0022808 , Rod Seal ( * ) Part No-Eea0022807 , Wiper ( * ) Part No-Eea0025635 , Seal Kit ( * ) Marked Items Part No-Eea0025645 , Spacer Part No-907A020000046 , Pin Part No-917A060000016 , Lock Plate Part No-822A060000013 , Hex Socket Head Cap Screw Part No-370-2311 , Pin Assy. Part No-917A020000002 , Pin Part No-917A060000018 , R. Bar Part No-Eea0012035 , Pin ( F.F.-R.F. ) Part No-907B060000005 , Clamp Half Part No-912B060000115 , Hex Head Bolt Part No-370-0631 , Hex Nut Part No-369-0116 , Spring Washer Part No-Mdw16sa , Hex Head Bolt Part No-370-0236 , Spring Washer Part No-Mdw08sa , Cover Part No-811B020000150 , Gasket Part No-811B050000067 , Tank Relief Cartridge Part No-613M000001081 , Bonded Seal Part No-Sc011 / 013 , Steel Ball Part No-Gr6 , Bonded Seal Part No-Sc011 / 019 , Drain Cock, Valve Part No-Bp2rve , Suction Strainer ( 40 Mesh ) Part No-625B050000122 , Hex Bushing Part No-Bp11bb10 , Oil Level Window Part No-241A000000284 , Bonded Seal Part No-Sc011 / 027 , Grease Nipple Part No-Bp1fg , Lock Plate Part No-912A020000551 , Hex Head Bolt Part No-370-0306 , Flat Washer Part No-Maw08ga , Lock Wire ( As Required ) Part No-L400 , Plate Part No-Eea0025704 , Spacer Part No-Eea0025803 , Guard Part No-Eea0028536 , Hex Head Bolt Part No-370-0237 , Tank Breather Part No-917A050000078 , Clamp Plate Part No-Eea0026327 , Hex Head Bolt Part No-370-0409 , Hex Nut Part No-369-0112 , Spring Washer Part No-Mdw12sa , Flat Washer Part No-Maw12ga , Seat- Hyd Suspension Part No-907A050000093 , Hex Head Bolt Part No-370-0240 , Fuel Level Guard Part No-907A020000043 , Bush Part No-Mbh100_120_50 , Bush Part No-Mbh100_120_45 , Bush Part No-Mbh100_120_61 , Canopy Assembly Part No-907A070000007 , Threaded Boss Part No-811A060000056 , Threaded Boss Part No-016A000099060 , Eimco Logo Assy. Part No-19Wl020000262 , Logo E ( Big ) Part No-19Wl020000263 , Logo E Small Part No-19Wl020000264 , Name Plate Part No-Eeb0018997 , Clamp Part No-Eea0007780 , Plate Part No-Eea0027695 , Beacon Mtg. Bkt. Part No-910A020000114 , Flashing Light Bracket Part No-Eea0031660 , Hex Head Bolt Part No-370-0204 , Spring Washer Part No-Mdw06sa , Hex Head Bolt Part No-370-1013B , Spring Washer Part No-Mdw24sa , Hex Head Bolt Part No-370-1015 , Hex Nut Part No-369-0124 , Hex Head Bolt Part No-370-1009 , Diesel Engine Part No-907B050000005 , Engine Bracket Part No-907A020000059 , Engine Bracket, Rh Part No-907B020000060 , Engine Bracket, Lh Part No-907B020000061 , Avm ( Engine ) Part No-19Wl050000865 , Avm, Engine Part No-910A050000025 , Hex Head Bolt Part No-370-0612 , Hex Head Bolt Part No-370-0623 , Spacer Part No-Eea0027233 , Hex Head Bolt Part No-370-1026 , Hex Nut, Nyloc Part No-Mt24ln , Spring Washer Part No-Mdw16sa , Hex Nut Part No-369-0124 , Flat Washer Part No-Maw24ga , Washer, Avm Part No-907A020000068 , Transmission Part No-917B050000002 , Pipe Plug Part No-Eea0026623 , Assembly-Conv Housing & Tube Part No-Eea0022609 , Sleeve Part No-Eea0013072 , Tube Slleve Part No-Eea0005696 , Sleeve Part No-Eea0008045 , Sleeve Lock Part No-Eea0008046 , Lock Washer Part No-Eea0013073 , Tube Clip Screw Part No-Eea0005690 , O Ring Part No-Eea0013079 , Spacer Ring Part No-Eea0013080 , Tube Assy. Part No-Eea0013081 , Lock Washer Part No-Eea0005729 , Screw, Cover Part No-Eea0010946 , Tube Clip Part No-Eea0008041 , Rev. Tube Assy. Part No-Eea0011579 , O Ring Part No-Eea0013082 , Lube Tube Assy. Part No-Eea0011578 , Tube Assy. Part No-Eea0011580 , Supply Tube Part No-Eea0011583 , Sleeve Part No-Eea0013072 , Tube Slleve Part No-Eea0005696 , Sleeve Part No-Eea0008045 , Sleeve Lock Part No-Eea0008046 , Lock Washer Part No-Eea0013073 , Tube Clip Screw Part No-Eea0005690 , Air Breather Part No-Eea0005680 , Elbow Part No-Eea0011641 , Breather Bushing Part No-Eea0011556 , Lock Washer Part No-Eea0005685 , Screw-Conv Hsg To Trans Case Part No-Eea0026624 , Lockwasher-Pump Mounting Screw Part No-Eea0026625 , Screw-Conv Hsg To Trans Case Part No-Eea0026626 , O Ring Part No-Eea0013079 , Spacer Ring Part No-Eea0013080 , Tube Assy. Part No-Eea0013081 , Lock Washer Part No-Eea0005729 , Screw, Cover Part No-Eea0010946 , Tube Clip Part No-Eea0008041 , Rev. Tube Assy. Part No-Eea0011579 , O Ring Part No-Eea0013082 , Lube Tube Assy. Part No-Eea0011578 , Tube Assy. Part No-Eea0011580 , Supply Tube Part No-Eea0011583 , Screw-Conv Hsg To Trans Case Part No-Eea0026627 , Gasket Part No-Eea0008057 , Pin Part No-Eea0023186 , Spacer Part No-Eea0023187 , Seal Part No-Eea0005936 , Cover-Converter Housing Front Part No-Eea0026655 , Screw Part No-Eea0011557 , Stud Nut Part No-Eea0013069 , Stud ( Not Shown ) Part No-Eea0019387 , Lock Washer Part No-Eea0005729 , Gasket Part No-Eea0005917 , Hose Fitting Part No-Eea0013102 , Hose Fitting Part No-Eea0013103 , Trans. Case & Tube Assy. Part No-Eea0013750 , Tube Assy. Part No-Eea0013110 , Clip Part No-Eea0013109 , Tube Slleve Part No-Eea0005696 , Pressure Tube Part No-Eea0008060 , Rivet Part No-Eea0008072 , Cap Screw Part No-Eea0019350 , Washer Part No-Eea0013112 , Oring, Suction Line Part No-Eea0005966 , Baffle, Oil Part No-Eea0008073 , Baffle, Oil Part No-Eea0008074 , O Ring Part No-Eea0011654 , Pressure Tube Part No-Eea0011587 , Tube Part No-Eea0011588 , Retainer Ring Part No-Eea0008035 , Oil Distributor Part No-Eea0011609 , Ball Part No-Eea0019351 , Tube Assy. Part No-Eea0013110 , Clip Part No-Eea0013109 , Tube Slleve Part No-Eea0005696 , Pressure Tube Part No-Eea0008060 , Rivet Part No-Eea0008072 , Cap Screw Part No-Eea0019350 , Washer Part No-Eea0013112 , O Ring Part No-Eea0026628 , Baffle, Oil Part No-Eea0008073 , Baffle, Oil Part No-Eea0008074 , O Ring Part No-Eea0026629 , Pressure Tube Part No-Eea0011587 , Tube Part No-Eea0011588 , Retainer Ring Part No-Eea0008035 , Oil Distributor Part No-Eea0011609 , Ball Part No-Eea0019351 , Dowel Pin Part No-Eea0008061 , O Ring Part No-Eea0026630 , Magnetic Drain Plug Part No-Eea0005708 , Plug-Oil Level / Plug-Lockup Port Part No-Eea0026631 , Screen Assembly Part No-Eea0005688 , Screen Assy. Gasket Part No-Eea0005687 , Cover Part No-Eea0013751 , Gasket Part No-Eea0008075 , Capscrew Part No-Eea0026633 , Lockwasher-Pump Mounting Screw Part No-Eea0026625 , Nut Part No-Eea0026634 , Stud Part No-Eea0011561 , Pipe Plug Part No-Eea0005683 , Capscrew Part No-Eea0026635 , Lockwasher Part No-Eea0026636 , Assy-Stator Support Sleeve Part No-Eea0011616 , Turbine Shaft Part No-Eea0013121 , Piston Ring Part No-Eea0008293 , Bearing Part No-Eea0019389 , Snap Ring Part No-Eea0008050 , Piston Ring Part No-Eea0008278 , Oil Baffle Part No-Eea0011573 , Seal Ring Part No-Eea0011586 , Ring, Oil Baffle Retaining Part No-Eea0010858 , Turbine Hub Part No-Eea0013122 , Snap Ring Part No-Eea0008268 , Reaction Member Part No-Eea0013123 , Spacer Part No-Eea0011571 , Snap Ring Part No-Eea0013124 , Bearing Part No-Eea0013125 , Impeller Hub Part No-Eea0013126 , O Ring Part No-Eea0013127 , Impeller Part No-Eea0026638 , Backing Ring Part No-Eea0013129 , Screw Part No-Eea0013130 , Turbine Part No-Eea0011622 , Screw Part No-Eea0008272 , Cap Screw Part No-Eea0019390 , Oring Part No-Eea0005753 , Impeller Cover Part No-Eea0013132 , Capscrew Part No-Eea0026639 , Lock Washer Part No-Eea0005729 , Bearing Part No-Eea0013133 , Bearing Washer Part No-Eea0013134 , Snap Ring Part No-Eea0013135 , O Ring Part No-Eea0013136 , Input Shaft Part No-Eea0013137 , Capscrew Part No-Eea0026640 , Shaft Bearing Part No-Eea0011568 , Lock Washer Part No-Eea0005685 , Screw Part No-Eea0011642 , Gear Part No-Eea0013139 , Bearing Support Part No-Eea0011574 , Bearing Ball Part No-Eea0019391 , Ring - Snap Part No-Eea0019392 , Ring-Span Part No-Eea0008296 , Gear-Imppeller Hub - 46T Part No-Eea0013084 , Gear- Pump Drive Idler 47T Part No-Eea0019393 , Support- Pump Drive Idler Part No-Eea0019394 , Bearing- Ball 6309 Part No-Eea0019395 , Snap-Ring-Internal Part No-Eea0019376 , Gear Clutch Driven 25T Part No-Eea0026653 , Gear-High Range 52T Part No-Eea0011585 , Gear-Drive Low 4Th. 26T Part No-Eea0013737 , Gear-2Nd 30T Part No-Eea0011621 , Reverse 2Nd Shaft Piston Ring Part No-Eea0005807 , Front Bearing Retaing Ring Part No-Eea0005808 , Washer Part No-Eea0013140 , End Plate Balend Plate Ball Part No-Eea0013141 , Front Bearing Part No-Eea0013142 , Bearing Part No-Eea0023197 , Retaninng Ring Part No-Eea0023198 , Baffle Ring Part No-Eea0008085 , Retainer Ring Part No-Eea0008086 , End Plate Part No-Eea0013143 , Clutch Outer Disc Part No-Eea0008088 , Inner Disc Part No-Eea0013144 , Assy. Clutch Piston & Seals Part No-Eea0019377 , Outer Seal Part No-Eea0008091 , Inner Seal Part No-Eea0008092 , Seal-Clutch Piston Metering Part No-Eea0019354 , Assy-Rev & 3Rd Shaft Part No-Eea0023199 , Seal-Clutch Piston -Outer Part No-Eea0022170 , Assy-Clutch Piston & Seals Part No-Eea0022169 , End Plate Part No-Eea0013149 , Retainer Spring Part No-Eea0022171 , Washer Assy. Part No-Eea0013150 , Snap Ring Retainer Part No-Eea0008098 , Spring Retainer Snap Ring Part No-Eea0005820 , Low Speed Gear Bearing Part No-Eea0005826 , Spring Retainer Part No-Eea0008101 , Return Spring Part No-Eea0008102 , Spring Retainer Part No-Eea0008103 , Bearing Part No-Eea0008104 , Snap Ring Part No-Eea0008105 , Spacer Part No-Eea0008106 , Shield Out Part No-Eea0008107 , Rear Bearing Part No-Eea0013151 , Retainer Ring Part No-Eea0008109 , Reverse 2Nd Shaft Piston Ring Part No-Eea0005807 , Front Bearing Retaing Ring Part No-Eea0005808 , Washer Part No-Eea0013140 , End Plate Balend Plate Ball Part No-Eea0013141 , Front Bearing Part No-Eea0013142 , Front Bearing Snap Ring Part No-Eea0005809 , Bearing Part No-Eea0023197 , Retaninng Ring Part No-Eea0023198 , Baffle Ring Part No-Eea0008085 , Low Speed Gear Bearing Part No-Eea0005826 , Spring Retainer Snap Ring Part No-Eea0005820 , Snap Ring Retainer Part No-Eea0008098 , Washer Assy. Part No-Eea0013150 , Retainer Spring Part No-Eea0022171 , Ring Retainer Part No-Eea0013162 , Sanp Ring Part No-Eea0013163 , Spring Retainer Part No-Eea0008103 , Return Spring Part No-Eea0008102 , Spring Retainer Part No-Eea0008101 , Retainer Ring Part No-Eea0008086 , End Plate Part No-Eea0013143 , Clutch Outer Disc Part No-Eea0008088 , Inner Disc Part No-Eea0013144 , Assy. Clutch Piston & Seals Part No-Eea0019377 , Outer Seal Part No-Eea0008091 , Inner Seal Part No-Eea0008092 , Seal-Clutch Piston Metering Part No-Eea0019354 , Assy.-Fwd & 2Nd Shaft, Hub, Drum & Plug Part No-Eea0023243 , Seal-Clutch Piston -Outer Part No-Eea0022170 , Assy-Clutch Piston & Seals Part No-Eea0022169 , End Plate Part No-Eea0013149 , Gear-Clutch Driven 27T Part No-Eea0023193 , Gear-2Nd 30T Part No-Eea0011621 , Assy-Low Shaft, Hub, Drum & Plug Part No-Eea0019357 , Assy-Low Hub & Drum Part No-Eea0019358 , O Ring Part No-Eea0013178 , Retaining Ring Part No-Eea0013175 , Shaft Part No-Eea0013753 , Plug Part No-Eea0013179 , Assy-Low Hub & Drum Part No-Eea0019358 , O Ring Part No-Eea0013178 , Retaining Ring Part No-Eea0013175 , Shaft Part No-Eea0013753 , Plug Part No-Eea0013179 , Seal-Clutch Piston Metering Part No-Eea0019354 , Assy-Clutch Piston & Seals Part No-Eea0019359 , Inner Seal Part No-Eea0008092 , Seal-Clutch Piston -Outer Part No-Eea0022170 , Clutch Inner Disc Part No-Eea0008115 , Clutch Outer Disc Part No-Eea0008088 , End Plate Part No-Eea0008087 , Retainer Ring Part No-Eea0008086 , Spring Part No-Eea0013167 , Retainer Spring Part No-Eea0013168 , Bearing Spacer Part No-Eea0013170 , Spring Retainer Part No-Eea0008124 , Snap Ring Part No-Eea0008050 , Ring Retainer Part No-Eea0013169 , Gear ( 54T ) Part No-Eea0013752 , Bearing Assy. Part No-Eea0013171 , Piston Ring Part No-Eea0008227 , Pilot Bearing Part No-Eea0008130 , Bearing Cup Part No-Eea0008156 , Bearing Cone Part No-Eea0013191 , Cap Part No-Eea0013756 , Capscrew Part No-Eea0026639 , Lock Washer Part No-Eea0005729 , Lock Washer Part No-Eea0005729 , Pipe Plug Part No-Eea0005683 , O Ring Part No-Eea0026644 , O Ring Part No-Eea0026645 , Bearing Cup Part No-Eea0014098 , Bearing Cone Part No-Eea0013173 , Seal-Clutch Piston Metering Part No-Eea0019354 , Inner Seal Part No-Eea0008092 , Snap Ring Part No-Eea0013135 , Assy-4Th Hub & Drum Part No-Eea0019360 , Assy-Idler Shaft, Gear And Plugs Part No-Eea0019361 , Shaft And Bearing Assy. Part No-Eea0013189 , Bearing Lock Ball Part No-Eea0008138 , Locating Ring Part No-Eea0008139 , Washer Part No-Eea0013764 , Disc Hub Nut Part No-Eea0013224 , Gasket Part No-Eea0008141 , Cap Part No-Eea0013765 , Ber.Cap Stud Lock Washer Part No-Eea0005861 , Screw Part No-Eea0013766 , Outer Seal Part No-Eea0008091 , Assy-Clutch Piston & Seals Part No-Eea0019359 , Clutch Outer Disc Part No-Eea0008088 , Inner Disc Part No-Eea0013144 , End Plate Part No-Eea0008087 , Retainer Ring Part No-Eea0008086 , Spring Retainer Part No-Eea0008101 , Return Spring Part No-Eea0008102 , Spring Retainer Part No-Eea0008103 , Snap Ring Part No-Eea0011575 , Impeller Hub Gear Bearing Part No-Eea0005738 , Gear-4Th Clutch & Hub 23T Part No-Eea0019363 , Spacer Part No-Eea0011595 , Bearing Part No-Eea0011566 , Piston Ring Part No-Eea0008224 , Oil Seal Part No-Eea0013190 , Bearing Cap Part No-Eea0008145 , O Ring Part No-Eea0026648 , Bearing Cup Part No-Eea0011629 , Bearing Cone Part No-Eea0013191 , Gear Spacer Part No-Eea0013192 , Output Shaft Part No-Eea0013193 , Bearing Cup Part No-Eea0008156 , O Ring Part No-Eea0026649 , O Ring Part No-Eea0026650 , Ber.Cap Stud Lock Washer Part No-Eea0005861 , Capscrew Part No-Eea0026651 , Capscrew Part No-Eea0026652 , Gasket Part No-Eea0011617 , O Ring Part No-Eea0013311 , O Ring Part No-Eea0005695 , O Rong Part No-Eea0013214 , Stud Part No-Eea0011577 , Gasket Part No-Eea0011637 , Lock Washer Part No-Eea0005685 , Bearing Cap Stud Nut Part No-Eea0005836 , Pressure Regulator Part No-Eea0013213 , Plug-Oil Level / Plug-Lockup Port Part No-Eea0026631 , Valve Seat Part No-Eea0011600 , Spacer Part No-Eea0011601 , Safety Valve Plunger Part No-Eea0013198 , Valve Spring Part No-Eea0008250 , O Ring Part No-Eea0026656 , Valve Stop Part No-Eea0011569 , Roll Pin Part No-Eea0011652 , Valve Stop Part No-Eea0008243 , O Ring Part No-Eea0026657 , Valve Piston Part No-Eea0011638 , Valve Spring , Inner Part No-Eea0008247 , Valve Spring Outer Part No-Eea0011613 , Oil Seal Part No-Eea0013212 , Roll Pin Part No-Eea0011602 , Charging Pump & Cover Part No-Eea0026646 , Assyembly Charging Pump 20 Gpm Part No-Eea0022635 , Lockwasher Part No-Eea0026658 , Capscrew Part No-Eea0026659 , Gasket Part No-Eea0013215 , Pump Cover Part No-Eea0013216 , Gasket Part No-Eea0013780 , Capscrew Part No-Eea0026683 , Lock Washer Part No-Eea0005729 , Assembly-Control Valve Cover Part No-Eea0026661 , Plug Part No-Eea0021168 , Gasket Part No-Eea0013780 , Plug-Filler Part No-Eea0021190 , Spool Part No-Eea0013781 , Pin Part No-Eea0013782 , Accumulator Spring Inner Part No-Eea0005908 , Spring Part No-Eea0013783 , Spring Part No-Eea0026662 , Fitting Plug Part No-Eea0026663 , Spool Part No-Eea0026664 , Spring Part No-Eea0026665 , Pin Part No-Eea0026666 , Shuttle Valve-Bottom Part No-Eea0013786 , Ctrl Valve & Hsg. Assy. Part No-Eea0013770 , O Ring Part No-Eea0026667 , O Ring Part No-Eea0026668 , O Ring Part No-Eea0026669 , O Ring Part No-Eea0026670 , O Ring Part No-Eea0026671 , Assy-Spool Type Solenoid Cartrigde Part No-Eea0026672 , Fitting-Plug, O Ring Seal Part No-Eea0026703 , O Ring Part No-Eea0026673 , Spring Part No-Eea0013768 , Spool-Regulator Part No-Eea0026674 , Plug Part No-Eea0013179 , Cover-Solenoid Part No-Eea0026676 , Cover-Solenoid Part No-Eea0026677 , Capscrew Part No-Eea0026678 , Lock Washer Part No-Eea0013073 , Retainer-Wire Part No-Eea0026679 , Retainer Part No-Eea0026680 , Spacer-Wire Retainer Part No-Eea0026681 , Gasket Part No-Eea0013767 , Capscrew Part No-Eea0026683 , Lock Washer Part No-Eea0005729 , Flange Part No-Eea0011972 , O Ring, Flange Part No-Eea0010959 , Washer Part No-Eea0011872 , Nut Part No-Eea0008317 , Flange Part No-Eea0013732 , O Ring Part No-Eea0013065 , Washer Part No-Eea0013064 , Nut Part No-Eea0008140 , Pump Adaptor Part No-Eea0026684 , Gasket Part No-4697203 , Lockwasher Part No-Eea0026636 , Capscrew Part No-Eea0026686 , Pump Drive Sleeve & Snap Ring Part No-Eea0019402 , Pump Drive Hole Cover Part No-Eea0019386 , Snap Ring Part No-Eea0013814 , Snap Ring Part No-Eea0008309 , Gasket Part No-Eea0011597 , Adaptor-Pump Part No-Eea0026688 , Lock Washer Part No-Eea0005685 , Capscrew Part No-Eea0026689 , Lock Washer Part No-Eea0005729 , Capscrew Part No-Eea0026690 , Pump Drive Sleeve And Snap Ring Assembly Part No-Eea0026691 , Sleeve Pump Drive Part No-Eea0026692 , Snap Ring Part No-Eea0008309 , Kit-Connector, Wire & Seal Part No-Eea0026654 , Taps - Oil Fill Part No-Eea0013091 , Cab Control Part No-Eea0025805 , Duel Element Filter Assy. Part No-Eea0026879 , Filter Head Assy. Part No-Eea0026880 , Electrical Indicator Assy. Part No-Eea0026881 , Indicator Seal & Connector Nut Kit Part No-Eea0026882 , Filter Element Assy. Part No-Eea0026790 , Bracket Part No-917A020000043 , Bracket Part No-917A020000044 , Bracket Part No-917A020000045 , Bracket Part No-917A020000046 , Hex Head Bolt Part No-917A060000022 , Spring Washer Part No-W12gf , Dip Stick Part No-912A050000080 , Lock Wire ( As Required ) Part No-L400 , Reducer ( Bsp-Npt ) , M / M Part No-Sc089 / 046 , Elbow, 90 Degree M / F Part No-Se012 / 026 , Hose Assembly Part No-623D02584 / 148 , Bonded Seal Part No-Sc011 / 024 , Elbow, Street 90 Degree M / F Part No-Bp6blb , Pipe Part No-Eea0026870 , Pillow Block Bearing Part No-917A050000016 , Drive Line ( Front ) Part No-912B050000206 , Spider Assy. ( 7C ) Part No-912A050000208 , Drive Line ( Articulation ) Part No-912B050000218 , Spider Assy. ( 7C ) Part No-912A050000208 , Drive Line ( Tr. To Rear Axle ) Part No-917B050000020 , Hex Head Bolt Part No-T8hg40 , Spring Washer Part No-W8gfb , Hex Head Bolt Part No-370-0612 , Hex Nut Part No-369-0116 , Spring Washer Part No-Mdw16sa , Flat Washer Part No-Maw16ga , Hex Head Bolt Part No-370-0815 , Hex Nut Part No-369-0120 , Spring Washer Part No-Mdw20sa , Hex Head Bolt Part No-T6hg32 , Spring Washer Part No-W6gf , Upbox Part No-917B050000090 , Radial Seal Ring Part No-Eea0027541 , Drive Flange Part No-Eea0027542 , Hexagon Screw Part No-Eea0027543 , Disk Part No-Eea0027544 , Disk Part No-Eea0027545 , Housing Part No-Eea0027546 , Screw Plug Part No-Eea0027547 , Sealing Ring Part No-Eea0027548 , Screw Plug Part No-Eea0027549 , Breather Part No-Eea0027550 , Plate Part No-Eea0027551 , Hexagon Socket Screw Part No-Eea0027552 , Sleeve Part No-Eea0027553 , Hexagon Screw Part No-Eea0027554 , Radial Seal Ring Part No-Eea0027555 , Angle Piece Part No-Eea0027556 , Cover Part No-Eea0027557 , Gear Wheel Part No-Eea0027558 , Pinion Part No-Eea0027559 , Shaft Part No-Eea0027560 , Hexagon Socket Screw Part No-Eea0027561 , Bearing Part No-Eea0027562 , Bearing Part No-Eea0027563 , Cover Part No-Eea0027564 , Hexagon Screw Part No-Eea0027565 , Pinion Part No-Eea0027566 , Grooved Ball Bearing Part No-Eea0027567 , Grooved Ball Bearing Part No-Eea0027568 , Flange Part No-Eea0027569 , Hexagon Screw Part No-Eea0027570 , Cover Part No-Eea0027571 , Hexagon Screw Part No-Eea0027572 , Driver Part No-Eea0027573 , Pipe Part No-Eea0027574 , Sealing Ring Part No-Eea0027575 , O-Ring Part No-Eea0027576 , O-Ring Part No-Eea0027577 , Coupling Part No-917B050000118 , Adaptor Plate Part No-Eea0026883 , Stud Part No-907A020000017 , Hex Nut Part No-369-0110 , Flat Washer Part No-Maw10ga , Drive Line Part No-917B050000092 , Spider Assy. - 6C Part No-907A050000050 , Spring Washer Part No-Mdw10sa , Hex Head Bolt Part No-370-0310 , Spacer Part No-912A060000178 , Wheel Assy. Part No-907B070000067 , Wheel Rim Part No-917B050000009 , Sleek Tyre 17.5 X R25 Part No-907A050000091 , Valve, Wheel Rim Part No-907A050000075 , Steering Hydraulic Group Part No-907B070000029 , Feeder Unit Block Part No-19Wl050000019 , Accumulator Part No-12Wl050000999 , Relief Valve Assy. Part No-625B050000064 , Relief Cartridge Part No-Eea0008997 , Seal Kit-Relief Valve, ( * ) Marked Items Part No-Eea0009001 , Accumulator ( 4-Ltr ) Part No-811A050000191 , Seal Kit For ( * ) Marked Items Part No-Eea0019109 , Sealing Ring Part No-Eea0022384 , O-Ring Part No-Eea0022385 , Pilot Valve Part No-910B050000055 , 2 Way Poppet Valve ( Nc ) Part No-907A050000001 , Gasket Part No-912A050000229 , Accumulator Charge Valve Part No-912B050000309 , Repair Kit Part No-Eea0018821 , Suction Flange Part No-917A020000061 , Suction Flange Part No-917A020000062 , Feeder Block Mounting Bracket Part No-917A020000068 , Check Valve Part No-907A050000004 , Steering Contrl Valve Part No-917B050000115 , Hydraulic Pump ( Steering And Brake ) Part No-917B050000017 , M14 Screw Part No-Eea0026292 , M14 Nut Part No-Eea0026293 , Oil Seal Part No-Eea0011535 , Thr. Plate Part No-Eea0026294 , Seal. Chann Part No-Eea0026295 , Seal. Bk-Up Part No-Eea0026296 , Seal Sect. Part No-Eea0026297 , Plug Part No-Eea0022648 , Seal Kit Part No-Eea0026838 , Split Flange Half ( Code 61 ) Part No-D10a010000032 , Special Fitting Part No-907A050000067 , Manifold Part No-907B020000051 , Bracket, Acc. Charge Vlv Part No-912A020000652 , Pipe Bend ( 90 Degree ) Part No-917A050000058 , Clamp Part No-Eea0019155 , Hose Clip Part No-P105phb , O Ring Part No-S2712 , O Ring Part No-S2803 , O Ring 32.92X3.53-N-Nbr90 Part No-341-5030 , Hose Assy. Part No-907A050000065 , Hose Assy. Part No-907A050000066 , Hyd.Hose Part No-Stdb025 / 004 , Hyd.Hose Part No-625A050000113 , Hose Assy. Part No-Stdd026 / 039 , Hose Assy. Part No-Stdd026 / 084 , Hose Assy. Part No-Stdd026 / 112 , Hose Assy. Part No-Stdd026 / 301 , Hose Assy. Part No-Stdd026 / 309 , Hose Assy. Part No-Stdd026 / 310 , Hose Assy. Part No-Stdd026 / 317 , Hose Assy. Part No-Stdd026 / 321 , Hose Assy. Part No-Stdd026 / 323 , Hose Assy. Part No-Stdd026 / 327 , Hose Assy. Part No-Stdd026 / 334 , Hose Assy. Part No-Stdd033 / 033 , Hose Assy. Part No-Stdd033 / 037 , Hose Assy. Part No-Stdd033 / 094 , Hex Bushing Part No-Bp8bb7 , Bonded Seal Part No-Sc011 / 009 , Bonded Seal Part No-Sc011 / 013 , Bonded Seal Part No-Sc011 / 016 , Bonded Seal Part No-Sc011 / 019 , Bonded Seal Part No-Sc011 / 024 , Bonded Seal Part No-Sc011 / 027 , Straight Adaptor Part No-Se024 / 201 , Straight Adaptor Part No-Se024 / 202 , Straight Adaptor Part No-Se024 / 203 , Straight Adaptor Part No-Se024 / 208 , Straight Adaptor Part No-Se024 / 209 , Straight Adaptor Part No-Se024 / 211 , Straight Adaptor Part No-Se024 / 212 , Straight Adaptor Part No-Se024 / 217 , Straight Adaptor Part No-Se024 / 218 , Straight Adaptor Part No-Se024 / 219 , Straight Adaptor Part No-Se024 / 429 , Straight Adaptor Part No-Se024 / 430 , Swivel Adaptor ( F / F ) Part No-Se024 / 431 , Adaptor Part No-Se024 / 454 , Tee Part No-Vu10f10e01ds , Swivel Nut Elbow Part No-Vu10f10e21bs , Elbow 45 Deg Part No-Vu10f10e21cs , Reducer Part No-Vu10f16e16as , St. Adaptor Part No-Vu10f8e16as , St. Adaptor Part No-Vu12f12e16as , Swivel Elbow, 90 Deg. Part No-Vu12f12e21bs , Adaptor Part No-Vu12f12e33ds , Adaptor Part No-Vu12f16e16as , Elbow 90 Degree Part No-Vu16f16e20bs , Swivel Nut Elbow Part No-Vu16f16e21bs , Straight Adaptor Part No-Vu6f6e16as , Swivel Nut Elbow Part No-Vu6f6e21bs , Swivel, Tee Part No-Vu6f6e25ds , Swivel Nut Branch Tee Part No-Vu6f6e33ds , Elbow 90 Degree Part No-Vu6f8e20bs , Elbow 90 Degree Part No-Vu8f8e21bs , Hex Nut Part No-369-0106 , Hex Nut Part No-369-0110 , Hex Nut Part No-369-0112 , Hex Head Bolt Part No-370-0206 , Hex Head Bolt Part No-370-0237 , Hex Head Bolt Part No-370-0304 , Hex Head Bolt Part No-370-0306 , Hex Head Bolt Part No-370-0312 , Hex Head Bolt Part No-370-0402 , Hex Head Bolt Part No-370-0403 , Hex Socket Head Cap Screw Part No-370-2411 , Threaded Boss ( M12x15lg ) Part No-Eea0016795 , Flat Washer Part No-Maw06ga , Flat Washer Part No-Maw08ga , Flat Washer Part No-Maw10ga , Flat Washer Part No-Maw12ga , Spring Washer Part No-Mdw06sa , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Spring Washer Part No-Mdw12sa , Hex Head Bolt Part No-T6gg12 , Hex Head Bolt Part No-T8gg28 , Spring Washer Part No-W8gf , Pressure Filter Part No-811A050000182 , Filter Element Part No-Eea0018438 , Filter Mounting Bracket Part No-917A020000087 , Hex Head Bolt Part No-370-0420 , Bracket, Pilot Valve Part No-910A020000187 , Bracket Part No-Eea0025607 , Plate Part No-Eea0025606 , Hex Nut Part No-Mt28mgg , Hose Assy. Part No-Stdd033 / 114 , Boss Part No-Eea0001567 , Service Hydraulic Group Part No-907B070000030 , Manifold Block Part No-910A050000019 , Check Valve Part No-Eea0030269 , Seal Kit, Check Valve Part No-Eea0030272 , Direction Valve Part No-Eea0030270 , Seal Kit, Direction Valve Part No-Eea0030273 , Solenoid Valve Part No-Eea0030271 , Seal Kit, Solenoid Valve Part No-Eea0030274 , 3 / 2 Way Valve Part No-19Wl050000655 , Check Valve Part No-625A050000111 , Gasket Part No-912A050000229 , Hydraulic Hand Pump Part No-611B050000326 , Hydraulic Pump ( Steering And Brake ) Part No-917B050000017 , M14 Screw Part No-Eea0026292 , M14 Nut Part No-Eea0026293 , Oil Seal Part No-Eea0011535 , Thr. Plate Part No-Eea0026294 , Seal. Chann Part No-Eea0026295 , Seal. Bk-Up Part No-Eea0026296 , Seal Sect. Part No-Eea0026297 , Plug Part No-Eea0022648 , Seal Kit Part No-Eea0026838 , Relief Valve Assy. Part No-625B050000064 , Relief Cartridge Part No-Eea0008997 , Seal Kit-Relief Valve, ( * ) Marked Items Part No-Eea0009001 , Return Filter Part No-611A050000018 , Filter Element Part No-Eea0003479 , Container Part No-Eea0000029 , O Ring ( * ) Part No-Eea0000031 , O Ring ( * ) Part No-Eea0000032 , O Ring ( * ) Part No-Eea0000033 , Hex Socket Head Cap Screw Part No-370-2409 , Sealkit, ( * ) Marked Items Part No-Eea0001034 , Service Control Vale Part No-907B050000089 , T-Bolt Clamp Part No-12Wl050000817 , Suction Flange Part No-917A020000064 , Suction Flange Part No-917A020000063 , Stand Pipe Part No-803A000000337 , Split Flange Half ( Code 61 ) Part No-D10a010000032 , Quick Release Coupling Part No-625A050000011 , Bspp Socket Part No-625A050000106 , Bspp Plug Part No-625A050000107 , Plug For Qrc Part No-625A060000008 , Pipe Bend ( 90 Degree ) Part No-917A050000058 , Manifold Part No-907B020000051 , Hose Clip Part No-P105phb , Flanged Pipe Part No-Eea0025628 , Elbow Part No-D06a050000150 , O Ring 32.92X3.53-N-Nbr90 Part No-341-5030 , O Ring Part No-S2816 , O Ring Part No-S2803 , Hose Assy. Part No-917A050000068 , Hose Assy. Part No-Stdd026 / 039 , Hose Assy. Part No-Stdd026 / 289 , Hose Assy. Part No-Stdd026 / 295 , Hose Assy. Part No-Stdd026 / 301 , Hose Assy. Part No-Stdd026 / 310 , Hose Assy. Part No-Stdd026 / 315 , Hose Assy. Part No-Stdd026 / 380 , Hose Assy. Part No-Stdd032 / 030 , Hose Assy. Part No-Stdd032 / 042 , Hose Assy. Part No-Stdd032 / 047 , Hose Assy. Part No-Stdd033 / 014 , Hose Assy. Part No-Stdd033 / 106 , Hyd. Hose Part No-Stdb025 / 013 , Hyd.Hose ( 51 Mm ) Part No-625A050000113 , Hyd. Hose Part No-Stdb025 / 014 , Hyd.Hose ( 51 Mm ) Part No-625A050000113 , Hyd.Hose Part No-Stdb025 / 004 , Hyd.Hose ( 51 Mm ) Part No-625A050000113 , Hydraulic Hose Part No-19Wl050000562 , Adaptor Part No-D06a050000132 , Adaptor Part No-Vu12f12e33ds , Adaptor Part No-Vu12f16e16as , Adaptor Part No-Vu16f16e16asb , Adaptor Part No-Vu8f8e21cs , Adaptor ( Unf To Jic ) Part No-Vu20f20e20asa , Elbow 45 Deg. Part No-Vu12f12e21cs , Elbow 90 Degree Part No-Vu8f8e21bs , Elbow, 90 Degree M / F Part No-Se012 / 022B , Elbow, 90 Degree M / F Part No-Se012 / 026 , Elbow, Std.90 Degree F / F Part No-Bp8bl , Gauge Adaptor Part No-Eea0003750 , Reducer, M / M Part No-Se012 / 096 , Reducer, M / M Part No-Se012 / 097 , Special Elbow Part No-Eea0028571 , Special Elbow Part No-Eea0017326 , St. Adaptor Part No-Se024 / 081 , St.Swivel Adaptor M / F Part No-Se012 / 062 , Straight Adaptor Part No-Se024 / 201 , Straight Adaptor Part No-Se024 / 202 , Straight Adaptor Part No-Se024 / 203 , Straight Adaptor Part No-Se024 / 206 , Straight Adaptor Part No-Se024 / 208 , Straight Adaptor Part No-Se024 / 209 , Straight Adaptor Part No-Se024 / 211 , Straight Adaptor Part No-Se024 / 217 , Straight Adaptor Part No-Se024 / 427 , Straight Adaptor Part No-Vu6f6e16as , Straight Adaptor M / M Part No-Se024 / 207 , Straight Adaptor, M / M Part No-Se012 / 085 , Swivel Adaptor ( F / F ) Part No-Se024 / 431 , Swivel Elbow, 90 Deg. Part No-Vu12f12e21bs , Swivel Nut Branch Tee Part No-Vu6f6e33ds , Swivel Nut Elbow Part No-Vu16f16e21bs , Swivel Nut Elbow Part No-Vu6f6e21bs , Swivel, Tee Part No-Vu6f6e25ds , Bonded Seal Part No-Sc011 / 009 , Bonded Seal Part No-Sc011 / 016 , Bonded Seal Part No-Sc011 / 019 , Bonded Seal Part No-Sc011 / 024 , Bonded Seal Part No-Sc011 / 027 , Flat Washer Part No-Maw12ga , Hex Bushing Part No-Bp9bb8 , Hex Head Bolt Part No-370-0308 , Hex Head Bolt Part No-370-0312 , Hex Head Bolt Part No-370-0402 , Hex Head Bolt Part No-370-0405 , Hex Head Bolt Part No-370-0420 , Hex Head Bolt Part No-370-0607 , Hex Head Bolt Part No-T8gg28 , Hex Head Plug ( Bsp ) Part No-Sc036 / 002 , Hex Head Plug ( Bsp ) Part No-Sc036 / 004 , Hex Nut Part No-369-0110 , Hex Socket Head Cap Screw Part No-370-2411 , Hex. Head Plug ( 1-5 / 8Unf-2A ) Part No-Sc036 / 056 , Spring Washer Part No-Mdw10sa , Spring Washer Part No-Mdw12sa , Spring Washer Part No-Mdw16sa , Spring Washer Part No-W8gf , Hose Sleeve Part No-611A050000139 , Hex Head Bolt Part No-370-0306 , Flat Washer Part No-Maw10ga , Manifold Block Part No-910B050000054 , Pressure Filter Part No-811A050000182 , Filter Element Part No-Eea0018438 , Filter Mounting Bracket Part No-917A020000087 , Hose Assy. Part No-Stdd033 / 114 , Hex Head Bolt Part No-370-0304 , Boss Part No-Eea0001567 , Hose Assy. Part No-Stdd033 / 037 , Hose Assy. Part No-Stdd026 / 024 , Hose Assy. Part No-Stdd033 / 024 , Hose Assembly Part No-623D02584 / 182 , Hose Assembly Part No-623D02584 / 201 , Hose Assy. Part No-Stdd026 / 323 , Hose Assy. Part No-Stdd026 / 092 , Hose Assy. Part No-Stdd026 / 047 , Hose Assy. Part No-Stdd026 / 317 , Hose Assy. Part No-Stdd026 / 328 , Hose Assembly Part No-623D02584 / 753 , Hose Assembly Part No-623D02584 / 756 , Speical Fitting Part No-Eea0029310 , Threaded Boss Part No-Eea0027253 , Swivel Elbow, 90 Deg. Part No-Vu12f12e21bs , Reducer, M / M Part No-Se012 / 095 , Bonded Seal Part No-Sc011 / 013 , Hex Head Plug ( Bsp ) Part No-Sc036 / 003 , Threaded Boss ( M12x15lg ) Part No-Eea0016795 , Straight Adaptor Part No-Se024 / 219 , Swivel Nut Elbow Part No-Vu10f10e21bs , Hose Assy. Part No-907A050000065 , Straight Adaptor Part No-Vu10f10e01as , St. Adaptor Part No-Se024 / 210 , Straight Adaptor Part No-Se024 / 430 , St.Swivel Adaptor M / F Part No-Se012 / 066 , Reducer, M / M Part No-Se012 / 101 , Straight Adaptor Part No-Se024 / 212 , Hose Assy. Part No-Stdd026 / 314 , Hose Assy. Part No-Stdd026 / 025 , Hose Assy Part No-Stdd033 / 023 , Hose Assy. Part No-Stdd033 / 039 , Hose Assy. Part No-Stdd033 / 031 , Special Fitting Part No-Eea0029315 , Hydraulic Pump Part No-910B050000063 , Hydraulic Pump, Brake Oil Part No-907B050000025 , Screw Part No-Eea0027587 , Washer Part No-Eea0027588 , Seal Part No-Eea0027589 , Standard Seal Part No-Eea0027590 , Shaft Seal Part No-Eea0027591 , Ring Part No-Eea0027592 , Anti Extrusion Part No-Eea0027593 , Dowel Pin Part No-Eea0027594 , Seal Kit Part No-Eea0029260 , Pressure Filter Part No-811A050000182 , Filter Element Part No-Eea0018438 , Relief Valve Assy. Part No-625B050000064b , Relief Cartridge Part No-Eea0008997 , Seal Kit-Relief Valve, ( * ) Marked Items Part No-Eea0009001 , Valve, Check 50 Psi Crack Part No-117439 , Accumulator ( 4-Ltr ) Part No-811A050000191 , Seal Kit For ( * ) Marked Items Part No-Eea0019109 , Sealing Ring Part No-Eea0022384 , O-Ring Part No-Eea0022385 , Brake Valve Part No-917B050000013 , Repair Kit, Brake Valve Part No-Eea0025375 , 3 Way Dcv Part No-811A050000158 , 3 / 2 Way Valve Part No-19Wl050000655 , Gasket Part No-907A050000047 , Gasket Part No-912A050000229 , Suction Flanged Part No-910A020000228 , Stand Pipe Part No-625A060000092 , Stand Pipe ( 1 1 / 4 Bspt ) Part No-621A000000202 , Special Elbow Part No-Eea0012523 , Elbow, 90 Degree M / F Part No-Se012 / 024 , Half Coupling Part No-Bp2fka , Special Elbow Part No-912A020000477 , Return Manifold Part No-822B020000066 , Half Coupling Part No-Bp7fka , Half Coupling Part No-Bp8fka , Coupling Part No-Stdd017 / 014 , Coupling Part No-Stdd017 / 015 , Quick Release Coupling Part No-912A050000201 , Plug Part No-912A060000188 , Manifold Block Part No-917B060000025 , Manifold Block Part No-917B060000021 , Gauge Panel Assy. Part No-907A070000028 , Bracket For Gauge Isolator Part No-907B020000064 , Pres.Gauge Isolator Valve Part No-811A050000013 , Drive Oil Pressure Gauge Part No-813B000000182 , Oil Pressure Gauge Part No-917B050000080 , Hex Nut Part No-369-0110 , Hex Head Bolt Part No-Stdb035-10-25 , Spring Washer Part No-Mdw10sa , Hex Socket Head Cap Screw Part No-370-2141 , Hex Nut Part No-369-0105 , Spring Washer Part No-Mdw05sa , Gauge Adaptor Part No-811A060000088 , St.Swivel Adaptor M / F Part No-Se012 / 062 , Filter Mounting Bracket Part No-917A020000087 , Bulkhead Bar Weldment Part No-917A020000072 , Plate Part No-Eea0025411 , Tee Adaptor Part No-105635 , Tee Adaptor Part No-102273 , O Ring Part No-S3308 , Clamp Part No-Eea0019155 , Gauge Adaptor Part No-Eea0009296 , Hose Assembly Part No-623D02584 / 333 , Hose Part No-625A00397 / 026 , Hyd.Hose ( 38 Mm ) Part No-Eea0009461 , Hose Clamp Part No-P9phb , Hose Assy. Part No-Stdd026 / 010 , Hose Assy. Part No-Stdd026 / 019 , Hose Assy. Part No-Stdd026 / 024 , Hose Assy. Part No-Stdd026 / 031 , Hose Assy. Part No-Stdd026 / 034 , Hose Assy. Part No-Stdd026 / 035 , Hose Assy. Part No-Stdd026 / 045 , Hose Assy. Part No-Stdd026 / 047 , Hose Assy. Part No-Stdd026 / 051 , Hose Assy. Part No-Stdd026 / 065 , Hose Assy. Part No-Stdd026 / 085 , Hose Assy. Part No-Stdd026 / 092 , Hose Assy. Part No-Stdd026 / 108 , Hose Assy. Part No-Stdd026 / 123 , Hose Assy. Part No-Stdd026 / 182 , Hose Assy. Part No-Stdd026 / 190 , Hose Assy. Part No-Stdd026 / 283 , Hose Assy. Part No-Stdd026 / 285 , Hose Assy. Part No-Stdd026 / 295 , Hose Assy. Part No-Stdd026 / 301 , Hose Assy. Part No-Stdd026 / 309 , Hose Assy. Part No-Stdd026 / 314 , Hose Assy. Part No-Stdd026 / 315 , Hose Assy. Part No-Stdd026 / 317 , Hose Assy. Part No-Stdd026 / 328 , Hose Assy. Part No-Stdd026 / 335 , Hose Assy. Part No-Stdd033 / 014 , Hose Assy. Part No-Stdd033 / 041 , Hoseassy. Part No-Stdd033 / 047 , Adaptor Part No-907A050000039 , St. Adaptor ( Metric To Jic ) Part No-917A050000060 , St. Adaptor ( Metric To Jic ) Part No-917A050000061 , St. Adaptor ( Metric To Jic ) Part No-917A050000062 , Fitting Part No-Eea0004895 , Bonded Seal Part No-Sc011 / 009 , Bonded Seal Part No-Sc011 / 016 , Bonded Seal Part No-Sc011 / 019 , Bonded Seal Part No-Sc011 / 024 , Bonded Seal Part No-Sc011 / 027 , Elbow, 90 Degree M / F Part No-Se012 / 024 , Elbow, 90 Degree M / F Part No-Se012 / 026 , St.Swivel Adst.Swivel Adaptor F / F Part No-Se012 / 044 , St.Swivel Adst.Swivel Adaptor F / F Part No-Se012 / 046 , St.Swivel Adaptor M / F Part No-Se012 / 066 , St.Swivel Adaptor M / F Part No-Se012 / 067 , Straight Adaptor, M / M Part No-Se012 / 082 , Straight Adaptor, M / M Part No-Se012 / 085 , Straight Adaptor, M / M Part No-Se012 / 086 , Reducer, M / M Part No-Se012 / 100 , Reducer, M / M Part No-Se012 / 101 , St. Adaptor Part No-Se024 / 008 , St. Adaptor Part No-Se024 / 009 , St. Adaptor Part No-Se024 / 078 , Straight Adaptor Part No-Se024 / 201 , Straight Adaptor Part No-Se024 / 202 , Straight Adaptor Part No-Se024 / 203 , Straight Adaptor Part No-Se024 / 208 , Straight Adaptor Part No-Se024 / 211 , Straight Adaptor Part No-Se024 / 214 , Straight Adaptor Part No-Se024 / 217 , Straight Adaptor Part No-Se024 / 218 , Straight Adaptor Part No-Se024 / 219 , Straight Adaptor Part No-Se024 / 220 , Straight Adaptor Part No-Se024 / 287 , Tee, M / M / F Part No-Se024 / 330 , Straight Adaptor Part No-Vu10f10e16as , Swivel Tee, 7 / 8 Part No-Vu10f10e20ds , Swivel Nut Elbow Part No-Vu10f10e21bs , St. Adaptor Part No-Vu10f8e16as , St. Adaptor Part No-Vu12f12e16as , Swivel Elbow, 90 Deg. Part No-Vu12f12e21bs , Adaptor Part No-Vu12f12e33ds , Adaptor Part No-Vu12f16e16as , Swivel Nut Elbow Part No-Vu6f6e21bs , Swivel Nut Elbow Part No-Vu6f6e21cs , Swivel, Tee Part No-Vu6f6e25ds , Swivel Nut Branch Tee Part No-Vu6f6e33ds , Straight Adaptor Part No-Vu8f12e02as , Fitting Part No-Vu8f12e02bs , Hyd Fitting Part No-Vu8f12e16as , Hyd Fitting Part No-Vu8f8e16as , Elbow 90 Degree Part No-Vu8f8e21bs , Adaptor Part No-Vu8f8e21cs , Swivel Tee, 3 / 4 Part No-Vu8f8e26ds , Hex Nut Part No-369-0112 , Bolt Hex M6x35 8.8 Zyp 5-8 M Part No-370-0212 , Hex Head Bolt Part No-370-0240 , Hex Head Bolt Part No-370-0304 , Hex Head Bolt Part No-370-0306 , Hex Head Bolt Part No-370-0310 , Hex Head Bolt Part No-370-0404 , Hex Head Bolt Part No-370-0405 , Hex Socket Head Cap Screw Part No-370-2338 , Hex Socket Head Cap Screw Part No-370-2411 , Flat Washer Part No-Maw08ga , Flat Washer Part No-Maw10ga , Flat Washer Part No-Maw12ga , Spring Washer Part No-Mdw06sa , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Spring Washer Part No-Mdw12sa , Hex Head Plug ( Bsp ) Part No-Sc036 / 002 , Hex. Head Plug ( 1-1 / 16Unf-2A ) Part No-Sc036 / 054 , Sp. Elbow Part No-Eea0027448 , Pipe Manifold Part No-907A020000056 , Coupling Part No-Stdd017 / 012 , Coupling Part No-Stdd017 / 013 , Coupling Part No-Stdd017 / 014 , Hex Head Plug ( Bsp ) Part No-Sc036 / 001 , Hex Head Plug ( Bsp ) Part No-Sc036 / 006 , Hex Head Plug ( Bsp ) Part No-Sc036 / 008 , O Ring Part No-S3306 , O Ring Part No-S3310n , O Ring Part No-S3312n , O Ring Part No-S3316n , O Ring Part No-S3320 , Flow Control Valve Part No-R2c050000101 , O Ring Part No-S2803 , Hex Head Bolt Part No-Stdb035-12-30 , Flanged Adaptor Part No-910A020000227 , Straight Adaptor Part No-Se024 / 201 , O Ring Part No-S2722 , Hex Head Bolt Part No-Stdb035-10-30 , Manifold Block Part No-910B050000054 , Straight Adaptor Part No-Se024 / 221 , Special Fitting Part No-Eea0029644 , Hose Assy. Part No-Stdd026 / 084 , Bonded Seal Part No-Sc011 / 013 , Straight Adaptor Part No-Se024 / 222 , Straight Adaptor Part No-Se024 / 430 , Straight Adaptor M / M Part No-Se024 / 207 , Straight Adaptor Part No-Se024 / 209 , Straight Adaptor Part No-Se024 / 212 , Banjo Adaptor Assy. M / M Part No-Se012 / 144 , St. Adaptor Part No-Se024 / 079 , Swivel Nut Elbow Part No-Vu16f16e21bs , Hose Assy. Part No-Stdd033 / 031 , Hose Assy. Part No-Stdd033 / 110 , Hose Assy. Part No-Stdd026 / 152 , Hose Assy. Part No-Stdd026 / 104 , Hex Head Bolt Part No-Stdb035-10-25 , Threaded Boss ( M10x15lg ) Part No-Eea0016870 , Hose Assy. Part No-Stdd026 / 110 , Transmission Hydraulic Group Part No-907B070000032 , Bracket For Trans. Filter Part No-917A020000075 , Flange Elbow Part No-917A050000046 , Adapter Male / Female - Jic Part No-D06a050000050 , Gauge Adaptor Part No-Eea0009296 , Sp. Fitting Part No-Eea0026859 , Hose Assy. Part No-Stdd026 / 306 , Hose Assy. Part No-Stdd033 / 055 , Hose Assy. Part No-Stdd033 / 060 , Hose Assy. Part No-Stdd033 / 062 , St. Adaptor Part No-Vu12f12e16as , Swivel Elbow, 90 Deg. Part No-Vu12f12e21bs , Elbow 45 Deg. Part No-Vu12f12e21cs , Straight Adaptor Part No-Vu6f2e02as , Swivel Nut Elbow Part No-Vu6f6e21bs , Hex Head Bolt Part No-370-0402 , Spring Washer Part No-Mdw12sa , Bonded Seal Part No-Sc011 / 024 , Straight Adaptor Part No-Se024 / 208 , Hex Head Bolt Part No-T6gg16 , Hex Head Bolt Part No-T8gg26 , Hex Socket Head Cap Screw Part No-T8gh28 , Spring Washer Part No-W6gf , Spring Washer Part No-W8gf , Hyd. Oil Cooler Part No-917B050000120 , Hydraulic Cooler Matrix ( 40Kw ) Part No-Eea0027901 , Transmission Cooler Matrix ( 70Kw ) Part No-Eea0027902 , Brake Cooler Matrix ( 15Kw ) Part No-Eea0027903 , Fan House-Em Part No-Eea0027904 , Fan-580 / 7 / S38zl / 38 / Pag / 74.75 Part No-Eea0027905 , Motor Bracket-Em Part No-Eea0027906 , Hydraulic Motor Part No-Eea0027907 , Seal Kit For Hyd. Motor Part No-Eea0028875 , Ring, Snap Part No-Eea0028876 , Lip Seal Part No-Eea0028877 , Spacer Part No-907A020000070 , Hex Head Bolt Part No-370-0328 , Flat Washer Part No-W6ga , Spring Washer Part No-Mdw10sa , Hex Head Bolt Part No-370-0306 , Spring Washer Part No-Mdw12sa , Hyd. Oil Cooler Mtg. Bracket Part No-907B020000069 , Hex Head Bolt Part No-370-0240 , Spring Washer Part No-Mdw08sa , Hex Head Bolt Part No-370-0244 , Hex Head Bolt Part No-370-0405 , Flat Washer Part No-W5ga , Front Control Panel Group Part No-907B070000054 , Front Control Panel Box Assy Part No-907B040000006 , Hex Head Bolt Part No-370-0237 , Hex Head Bolt Part No-370-0306 , Hex Head Bolt Part No-370-0412 , Mounting Plate Part No-917A020000078 , Front Panel Box Part No-917B020000057 , Clamp Part No-Eea0007778 , Front Control Panel Part No-907B050000087 , Rubber Sheet Part No-Eea0025389 , Flat Washer Part No-Maw10ga , Flat Washer Part No-Maw12ga , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Spring Washer Part No-Mdw12sa , 7 Display Part No-910B040000044 , Connector Kit ( Pv780 ) Part No-910A040000045 , Starting Switch Part No-19Wl040000073 , Emergency Stop Push Button Part No-Eea0022291 , Emergency Stop Marker Part No-Eea0029991 , Relay Module Part No-Epra040000007 , Buzzer 24V Dc Part No-19Wl040000084 , On Delay Timer ( Crouzet ) Part No-910A040000059 , Terminals Part No-Eea0022453 , Terminal Block ( Black ) Part No-Eea0029389 , Terminal End Plate Part No-Eea0022455 , End Clamps Part No-Eea0021276 , Terminal Block Part No-Eea0028566 , Terminal Block ( Kut10, Yellow ) Part No-Eea0029453 , Terminal Block ( Kut10, Green ) Part No-Eea0029454 , End Plate Part No-Eea0028567 , Mounting Rail Part No-Eea0021275 , Rect.Fork Type Terminal Part No-912A040000095 , Cable End Sleeve Terminal ( 2.5 Sq.Mm ) Part No-Eea0030029 , Cable End Sleeve Terminal ( 1.5 Sq.Mm ) Part No-Eea0030028 , Cable End Sleeve Terminal ( 6 Sq.Mm ) Part No-Eea0030117 , Plate Part No-Eea0029723 , Slotted Pan Head Screw Part No-Mt05eb16g , Hex. Nut Part No-Mt05lgg , Rubber Sheet Part No-Eea0026924 , Rubber Sheet Part No-Eea0026925 , Plate Part No-Eea0028469 , Threaded Boss Part No-811A060000056 , Hex Head Bolt Part No-370-0205 , Spring Washer Part No-Mdw06sa , Slotted Button Head Screw Part No-370-5113 , Flat Washer Part No-Maw06ga , S.C Cable Gland ( 3 / 4Et ) Part No-Eea0029761 , S.C Cable Gland ( 3 / 4Et ) Part No-Eea0030009 , S.C Cable Gland ( 1Et ) Part No-Eea0029760 , Cable Gland Pvc Hood ( 3 / 4 Et ) Part No-Eea0029992 , Cable Gland Pvc Hood ( 1 Et ) Part No-Eea0029993 , Contact Block ( No ) Part No-Eea0027986 , Side Control Panel Box Assy Part No-907B040000008 , Hex Head Bolt Part No-370-0238 , Hex Head Bolt Part No-370-0314B , Side Control Panel Box Part No-917B020000056 , Mounting Rail Part No-Eea0021275 , Flat Washer Part No-Maw08ga , Flat Washer Part No-Maw10ga , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Rubber Sheet Part No-Eea0025422 , Hex Head Bolt Part No-370-0308 , Slotted Pan Head Screw Part No-Mt05eb16g , Hex Head Bolt Part No-370-0205 , Spring Washer Part No-Mdw06sa , Flat Washer Part No-Maw06ga , Hex Nut Part No-369-0106 , Hex Nut Part No-369-0110 , Side Control Panel Part No-907B050000099 , Push Button - 3 Position Part No-116602 , Selector Switch Part No-Epra040000001 , Selector Switch ( 3 Pos. ) Part No-910A040000014 , Mecan1905 Part No-907B040000001 , Relay - 24 Volt Part No-116600 , Relay Module Part No-Epra040000007 , Timer Part No-Eea0020754 , Dc / Dc Convertor Part No-907A040000030 , Circuit Breaker, 32A Part No-Eea0024825 , Circuit Breaker, 6A Part No-19Wl871050265 , Circuit Breaker, 10A Part No-19Wl871050023 , Circuit Breaker, 16A Part No-Eea0025390 , Mcb Link ( 10 Way ) Part No-907A040000004 , Multi-Level Terminal Part No-Eea0029579 , End Plate Part No-Eea0029611 , Terminal Block ( Black ) Part No-Eea0029389 , Terminal End Plate Part No-Eea0022455 , End Clamps Part No-Eea0021276 , Terminal Block Part No-Eea0028566 , Terminal Block ( Kut10, Yellow ) Part No-Eea0029453 , Terminal Block ( Kut10, Green ) Part No-Eea0029454 , End Plate Part No-Eea0028567 , Mounting Din Rail Part No-Eea0022456 , Marker ( 15 ) Part No-910A040000026 , S.C Cable Gland ( 3 / 4Et ) Part No-Eea0029761 , S.C Cable Gland ( 3 / 4Et ) Part No-Eea0030009 , S.C Cable Gland ( 1Et ) Part No-Eea0029760 , Cable Gland Pvc Hood ( 3 / 4 Et ) Part No-Eea0029992 , Cable Gland Pvc Hood ( 1 Et ) Part No-Eea0029993 , Positive Lock Female Terminal Part No-Eea0025631 , Diode Terminal Block Part No-Eea0028499 , Diode Block End Plate Part No-Eea0029314 , Rect.Fork Type Terminal Part No-912A040000095 , Diode Circuit Part No-12Wl040000213 , Threaded Boss Part No-811A060000056 , Hex Head Bolt Part No-370-0205 , Flat Washer Part No-Maw06ga , Spring Washer Part No-Mdw06sa , Slotted Pan Head Screw Part No-Mt05eb16g , Hex Nut Part No-369-0106 , Cable Duct Part No-Eea0030113 , Sleeve, Flexib ( Bend ) Spireal Cut Part No-912A040000144 , Cable End Sleeve Terminal ( 2.5 Sq.Mm ) Part No-Eea0030029 , Cable End Sleeve Terminal ( 1.5 Sq.Mm ) Part No-Eea0030028 , Cable End Sleeve Terminal ( 6 Sq.Mm ) Part No-Eea0030117 , Male Connector Housing ( 12 Way ) Part No-Eea0028690 , Male Wedge Lock ( 12 Way ) Part No-Eea0028698 , Female Connector Housing ( 12 Way ) Part No-Eea0028694 , Female Wedge Lock ( 12 Way ) Part No-Eea0028702 , Male Connector Housing ( 6 Way ) Part No-Eea0028688 , Male Wedge Lock ( 6 Way ) Part No-Eea0028696 , Female Connector Housing ( 6 Way ) Part No-Eea0028692 , Female Wedge Lock ( 6 Way ) Part No-Eea0028700 , Socket For Dt Plug Part No-Eea0027064 , Pin For Dt Receptacle Part No-Eea0027062 , Terminating Resistor Link Part No-Eea0026749 , Cross Connection Link Assy Part No-Stda038 / 05 , Marker ( 0-100 ) Part No-910A040000024 , Marker ( 30 ) Part No-910A040000025 , Flexible Wire, 1.5 Sq.Mm, Pink Part No-Eea0025274 , Flexible Wire, 1.5 Sq.Mm, Blue Part No-Eea0025275 , Flexible Wire, 1.5 Sq.Mm, Yellow Part No-Eea0025276 , Flexible Wire, 1.5 Sq.Mm, Green Part No-Eea0025277 , Flexible Wire, 1.5 Sq.Mm, Violet Part No-Eea0025278 , Flexible Wire, 1.5 Sq.Mm, Red Part No-Eea0025279 , Flexible Wire, 1.5 Sq.Mm, Grey Part No-Eea0025280 , Flexible Wire, 1.5 Sq.Mm, White Part No-Eea0025281 , Flexible Wire, 1.5 Sq.Mm, Black Part No-Eea0025282 , Flexible Wire, 2.5 Sq.Mm, Red Part No-Eea0025283 , Flexible Wire, 6 Sq.Mm, Red Part No-Eea0025285 , Adjustable Cable Clamp Part No-912A040000170 , Heat Sleeve ( 5Mm ) Part No-Eea0027285 , Ring Tongue Terminal Part No-625A040000148 , By-127 Diode For P.B.Station Part No-Eea0002174 , Rubber Sheet Part No-Eea0026927 , Rubber Sheet Part No-Eea0026928 , Straight Wire Butt Connector Part No-Epra040000014 , Gland Plate Part No-Eea0030650 , Duel Head Lamp Relay ( 24V ) Part No-Eea0030031 , 6 Pole Female Connector Part No-12Wl040000181 , Terminal Part No-Eea0026062 , Hex. Nut Part No-Mt05lgg , Female Connector Housing ( 2 Way ) Part No-Eea0028691 , Female Wedge Lock ( 2 Way ) Part No-Eea0028699 , Male Connector Housing ( 2 Way ) Part No-Eea0028687 , Male Wedge Lock ( 2 Way ) Part No-Eea0028695 , Multicore Control Cable ( 4X1.5 ) Part No-907A040000025 , Hose Sleeve Part No-907A050000072 , On Delay Timer ( Crouzet ) Part No-910A040000059 , Twin Cable End Sleeve Terminal ( 1.5 Sq.Mm ) Part No-Eea0030690 , Led Work Light, 45W, Low Beam Part No-917A040000021 , Led Work Light, 45W, Wide Flood Part No-917A040000022 , Led Beacon Part No-917A040000024 , Led Flashing Light ( Amber ) Part No-917A040000023 , Led Tail Light Part No-907A040000018 , Led Work Light ( 15W ) Part No-Ssla040000019 , Paired Horn Part No-919A002910934 , Hyd. Oil Temp Sensor Part No-917A040000006 , Bracket Temp Prob. Mnt. Part No-912A060000126 , Side Mnt. Level Switch ( N Part No-912C040000105 , Gasket Part No-627B000000121 , Hyd. Oil Filter Clogging Indicator Part No-917A040000007 , Capacitance Oil Level Switch ( Falling ) Part No-917A040000026 , Fuel Sensor ( 907 ) Part No-907B040000013 , Brake Oil Temp. Switch Part No-917A040000005 , Pressure Transmitter, 250 Bar Part No-910A040000001 , Wireless Camera Recording System Part No-917B040000025 , Wireless Camera Part No-910A040000034 , Wireless Camera Display Part No-910A040000056 , Reversing Alarm Part No-Eea0022223 , Emergency Stop Control Station Part No-Eea0028455 , Emergency Stop Marker Part No-Eea0029991 , Interior Light Part No-910A040000029 , 2 Pole Amp Connector Part No-Eea0025257 , 3 Pole Delphi Packard Connector Part No-Eea0025258 , Female Terminal-Metri Pack 150 Part No-Eea0026863 , Apc 312 Harness With Connector Part No-910A040000002 , Rd120 Harness Cum Connector Part No-Eea0025260 , Multicore Control Cable ( 2X1.5 ) Part No-907A040000024 , Multicore Control Cable ( 4X1.5 ) Part No-907A040000025 , Multicore Control Cable ( 7X2.5 ) Part No-907A040000022 , Multicore Control Cable ( 18X2.5 ) Part No-907A040000023 , Multicore Control Cable For Rc Part No-912A040000157 , Can Bus Cable Part No-907A040000012 , 6 Pole Female Sealed Connector ( Dtm Series ) Part No-Eea0028818 , Female Connector Housing ( 2 Way ) Part No-Eea0028691 , Female Wedge Lock ( 2 Way ) Part No-Eea0028699 , Male Connector Housing ( 2 Way ) Part No-Eea0028687 , Male Wedge Lock ( 2 Way ) Part No-Eea0028695 , Female Connector Housing ( 6 Way ) Part No-Eea0028692 , Female Wedge Lock ( 6 Way ) Part No-Eea0028700 , Male Connector Housing ( 6 Way ) Part No-Eea0028688 , Male Wedge Lock ( 6 Way ) Part No-Eea0028696 , Pin For Dt Receptacle Part No-Eea0027062 , Socket For Dt Plug Part No-Eea0027064 , Junction Box Part No-907B040000026 , Local Control Station Part No-907B040000029 , Cable Gland Pvc Hood ( 3 / 4 Et ) Part No-Eea0029992 , Cable Gland Pvc Hood ( 1 Et ) Part No-Eea0029993 , Cable End Sleeve Terminal ( 2.5 Sq.Mm ) Part No-Eea0030029 , Cable End Sleeve Terminal ( 1.5 Sq.Mm ) Part No-Eea0030028 , Positive Lock Female Terminal Part No-Eea0025631 , Cross Connection Link Assy Part No-Stda038 / 05 , Cross Connection Link Assy Part No-Stda038 / 03 , Cross Connection Link Assy Part No-Stda038 / 02 , Mounting Din Rail Part No-Eea0022456 , Multi-Level Terminal Part No-Eea0029579 , End Clamps Part No-Eea0021276 , Terminal End Plate Part No-Eea0022455 , Terminal Block ( Black ) Part No-Eea0029389 , Partition Plate Without Foot Part No-Eea0030102 , Battery, 12V Part No-12Wl040000162 , Battery Cut-Off Switch ( Lockable ) Part No-910A040000033 , Battery Switch Bracket Part No-910A020000116 , Battery Cable Assy. Pos. To Sw. Part No-907B040000038 , Battery Cable Assy Part No-910A040000017 , Battery Cable Assy. Sw. To Starter Part No-907B040000039 , Battery Cable Assy. Neg To Ground Part No-907B040000040 , Battery Cable Assy Part No-910A040000020 , Rubber Pad Part No-Eea0027280 , Rubber Pad Part No-Eea0027279 , Rubber Pad Part No-Eea0027278 , Airfilter Extension Cable Part No-Eea0027658 , Solenoid Connector ( Led ) Part No-Eea0029713 , Pg Cable Gland Pg13.5 Part No-Eea0028456 , Limit Switch Part No-910A040000022 , Plate Part No-Eea0029957 , Cable Gland ( 1 / 2 Npt ) Part No-Eea0029456 , Roof Light Mtg. Bracket Part No-907A020000019 , Beacon Mtg. Bkt. Part No-910A020000114 , Light Mounting Bracket Part No-Eea0029720 , Guard Part No-Eea0014429 , Sleeve ( 10 Mm Dia ) Part No-19Wl040000061 , Sleeve ( 20 Mm Dia. ) Part No-19Wl040000062 , Cable Tie 3.6Mm X150mm Black Part No-12Wl040000035 , Cable Tie 4.8Mm X 200 Mm Black Part No-12Wl040000040 , Cab Lock Cable Ties Part No-811A050000033 , Clamp Part No-Eea0028574 , Clamp Part No-Eea0007779 , Clamp Part No-Eea0007778 , Hose Support Clamp Part No-Stda037 / 32 , Hose Support Clamp Part No-Stda037 / 40 , Hose Support Clamp Part No-Stda037 / 76 , Threaded Boss Part No-811A020000105 , Threaded Boss Part No-811A060000056 , Socket Head Cap Screw M5x35 L Part No-370-2146 , Slotted Button Head Screw Part No-370-5113 , Hex Socket Head Cap Screw Part No-370-2171 , Hex Socket Head Cap Screw Part No-Mt05nh16 , Slotted Button Head Screw Part No-370-5122 , Hex. Head Screw Part No-Mt05lg16g , Hex Head Bolt Part No-370-0304 , Hex Head Bolt Part No-370-0238 , Hex Head Bolt Part No-370-0404 , Hex Head Bolt Part No-370-0306 , Hex Head Bolt Part No-370-0237 , Hex Head Bolt Part No-370-0240 , Hex Head Bolt Part No-370-0204 , Hex Head Bolt Part No-370-0242 , Hex Head Bolt Part No-370-0142 , Hex Socket Head Cap Screw Part No-370-2170 , Hex Head Bolt Part No-370-0140 , Spring Washer Part No-Mdw05sa , Spring Washer Part No-Mdw06sa , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Spring Washer Part No-Mdw12sa , Spring Washer Part No-Mdw04sa , Flat Washer Part No-Maw05gag , Flat Washer Part No-Maw06ga , Flat Washer Part No-Maw08ga , Flat Washer Part No-Maw10ga , Medium Washer Part No-Maw04gcg , Hex Nut Part No-369-0106 , Hex Nut Part No-369-0108 , Cable Tags ( 910 ) Part No-910B040000036 , Hose Sleeve Part No-907A050000072 , Hose Sleeve Part No-907A050000073 , Electronic Joystick ( 2 Axis ) Part No-917B040000013 , Deutsche 6 Pole Male Connector Part No-Eea0025246 , Deutsche 6 Pole Female Connector Part No-Eea0025247 , Controller Part No-910A040000046 , Connector Kit ( Iqan-Mc42 ) Part No-910A040000047 , Bracket Part No-917A020000051 , Bracket Part No-917A020000052 , Plate Part No-Eea0027696 , Hex Head Bolt Part No-370-0205 , Slotted Button Head Screw Part No-370-5114 , Hex Nut Part No-369-0103 , Hex Head Bolt Part No-370-0308 , Hex Nut Part No-369-0110 , Hex Socket Head Cap Screw Part No-370-2141 , Battery Guard Part No-907A020000052 , Flashing Led, Red Part No-912A040000216 , Rubber Pad Part No-Eea0029908 , Yellow Sticker Kit Part No-910B040000037 , Bracket Part No-Eea0031308 , Flange Pipe Weldment Part No-907B020000103 , Expansion Bellow Part No-907B050000096 , Flange Pipe Weldment Part No-907B020000100 , Silencer Weldment Assy. Part No-907B020000009 , Flane Top Part No-Eea0027144 , Catalytic Converter With Muffler Part No-917B050000121 , Flane Bottom Part No-Eea0027145 , Flange Pipe Weldment Part No-907B020000082 , Bracket, Exhaust Part No-907B020000008 , Gasket For Exhaust Part No-907A050000011 , Gasket Part No-907A050000085 , Threaded Boss Part No-Eea0027140 , Hex Head Bolt Part No-370-0611 , Flat Washer Part No-Maw16ga , Spring Washer Part No-Mdw16sa , Flat Washer Part No-W6ga , Flat Washer Part No-W5ga , Hex Head Bolt Part No-370-0244 , Hex Head Bolt Part No-370-0250 , Hex Nut Part No-369-0108 , Hex Head Bolt Part No-370-0308 , Spring Washer Part No-Mdw10sa , Hex Nut Part No-369-0110 , Spring Washer Part No-Mdw08sa , Hex Head Bolt Part No-370-0312 , Fume Diluter Group Part No-907B070000072 , Mounting Plate, Fume Diluter Part No-907B020000104 , Flange Pipe Weldment Part No-907B020000105 , Clamp Part No-912B020000419 , Exhaust Gas Diluter Part No-912B050000318 , Gasket Part No-Eea0028557 , Hex Nut Part No-369-0112 , Flat Washer Part No-Maw12ga , Spring Washer Part No-Mdw12sa , Spring Washer Part No-Mdw16sa , Hex Head Bolt Part No-Stdb035-12-40 , Hex Head Bolt Part No-Stdb035-16-30 , Hex Head Bolt Part No-T7gg20 , Spring Washer. Part No-W7gf , Fibre Glass Tape Part No-910A050000031 , Fiber Glass Wool Part No-907A050000045 , Galvanise Wire Part No-Eea0027482 , Heat Insulation Jacket Part No-907A050000100 , Cooler Guard Part No-907B020000106 , Grill Part No-907B070000075 , Flat Washer Part No-Maw08ga , Spring Washer Part No-Mdw08sa , Hex Nut Part No-369-0108 , Hex Head Bolt Part No-370-0248 , Hex Head Bolt Part No-370-0250 , Support Bracket Part No-907B020000037 , Support Bracket Part No-907A020000038 , Support Bracket Part No-907A020000039 , Support Bracket Part No-907A020000107 , Support Bracket Part No-907A020000108 , Support Bracket Part No-907A020000119 , Support Bracket Part No-917A020000021 , Cover Part No-907A020000004 , Cover, Air Intake Part No-907A020000057 , Cover Part No-907A020000109 , Cover Part No-907A020000110 , Guard Plate Part No-907A020000114 , Guard Plate Part No-907A020000115 , Plate Part No-907A020000116 , Cover Part No-907B020000036 , Cover Part No-907B020000111 , Cover Part No-907B020000112 , Cover Part No-907B020000113 , Cover Part No-917A020000038 , Cover Part No-917A020000039 , Clamp Part No-Eea0007778b , Flat Washer Part No-Maw12ga , Cover Part No-917A020000041 , Cover Part No-917A020000042 , Exhaust Cover Assy. Part No-907B070000074 , Exhaust Cover Part No-907A020000117 , Exhaust Cover Part No-907A020000118 , Cover Plate Part No-Eea0033191 , Cover Plate Part No-Eeb0033187 , Plate Part No-Eea0033188 , Plate Part No-Eea0033189 , Threaded Boss ( M10x15lg ) Part No-Eea0016870 , Hex Head Bolt Part No-370-0206 , Hex Head Bolt Part No-370-0240 , Hex Head Bolt Part No-370-0304 , Flat Washer Part No-Maw06ga , Flat Washer Part No-Maw08ga , Spring Washer Part No-Mdw06sa , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Stopper Part No-917A020000040 , Hand Rest Seat Part No-907A050000069 , Hex Nut Part No-369-0108 , Avm Part No-907A050000092 , Threaded Boss Part No-Eea0003462 , Flat Washer Part No-Maw10ga , Flat Washer Part No-Maw12ga , Flat Washer Part No-Maw16ga , Flat Washer Part No-Maw20ga , Spring Washer Part No-Mdw08sa , Spring Washer Part No-Mdw10sa , Spring Washer Part No-Mdw12sa , Spring Washer Part No-Mdw16sa , Spring Washer Part No-Mdw20sa , Hex Nut Part No-369-0110 , Hex Nut Part No-369-0112 , Hex Nut Part No-369-0116 , Hex Head Bolt Part No-370-0240 , Hex Head Bolt Part No-370-0306 , Hex Head Bolt Part No-370-0308 , Hex Head Bolt Part No-370-0310 , Hex Head Bolt Part No-370-0312 , Hex Head Bolt Part No-370-0316 , Hex Head Bolt Part No-370-0404 , Hex Head Bolt Part No-370-0406 , Hex Head Bolt Part No-370-0412 , Hex Head Bolt Part No-370-0606 , Hex Head Bolt Part No-370-0609 , Hex Head Bolt Part No-370-0613 , Hex Head Bolt Part No-370-0809 , Cover, Fuel Tank Part No-910A020000239 , Gasket Part No-910A050000068 , Hex Head Bolt Part No-Stdb035-12-30 , Battery Box Part No-907B020000125 , Cover, Battery Part No-910A020000213 , Clamp, Battery Part No-Eea0031720 , Flat Washer Part No-Maw10ga , Spring Washer Part No-Mdw10sa , Hex Head Bolt Part No-Stdb035-10-20 , Hex Head Bolt Part No-Stdb035-10-30 , Hex Nut Part No-369-0110 , Threaded Boss Part No-Eea0007149 , Hex Head Bolt Part No-370-0304 , Hex Head Bolt Part No-370-0403 , Cover Part No-811B020000150 , Gasket Part No-811B050000067 , Conveyor Assy. Part No-907A070000080 , Threaded Boss Part No-Eea0007149 , Spring Washer Part No-Mdw10sa , Hex Head Bolt Part No-370-0310 , Bracket Part No-907A070000081 , Bracket Part No-907B020000124 , Name Plate ( Fuel ) Part No-912A050000001 , Name Plate ( Hyd. Oil ) Part No-912A050000003 , Name Plate ( M / C Sr. No ) Part No-100618 , Warning Plate ( Do Not Stand Here ) Part No-016B000091012 , Name Plate, Model Part No-907A050000009 , Decal, Tire Pres. Part No-246918 , Name Plate, Pressure Reading Part No-907A050000077 , Name Plate, Caution Safety Link Part No-Xa1365 , Name Plate, Joy Stick Operation Part No-907A050000078 , Warning Plate - Caution Crush Hazard Part No-822A050000034 , Hydraulic Oil - Identification Plate Part No-822A050000035 , Lubrication Plate Part No-907A050000010 , Voltage Indicator Plate Part No-822A050000037 , Warning Plate Part No-917A050000040 , Warning Plate - Danger Area Part No-822A050000039 , Name Plate - Steering Operation Part No-822A050000040 , Name Plate - Operator Control Part No-822A050000041 , Brake Hyd. Oil Identification Plate Part No-917A050000044 , Warning Plate- Do Not Touch Part No-917A050000045 , Name Plate-Pressure Check Points Part No-917A050000083 , Name Plate, Emergency Steering Part No-907A050000076 , Name Plate, Air Filter Part No-907A050000058 , Name Plate, Park Brake Release Part No-907A050000059 , Name Plate, Engine Start Stop Part No-907A050000060 , Name Plate, Weld Instruction Part No-907A050000061 , Name Plate, Battery Switch Part No-907A050000062 , Air Intake Kit Part No-907B050000013 , Air Cleaner Assy Part No-Eea0027315 , Hose Part No-Eea0027316 , Hose Clamp, T Bolt Part No-Eea0027317 , Precleaner, Metal Part No-Eea0027318 , Bracket Mounting Assy Part No-Eea0027319 , Bracket Mounting, Powder Coated Part No-Eea0027320 , Rain Hood, Metal Part No-Eea0027321 , Hose Elbow Part No-Eea0027322 , Hose Clamp, T Bolt Part No-Eea0027323 , Pipe Assy, Powder Coated Part No-Eea0027324 , Hose Part No-Eea0027325 , Pipe Assy, Powder Coated Part No-Eea0027326 , Bracket Assy Part No-Eea0027327 , Restriction Indicator Part No-Eea0027328 , Hose Clamp T-Bolt Part No-Eea0029203 , Hose Reducer Part No-Eea0029205 , Bracket, Air Cleaner Part No-907A020000025 , Hex Head Bolt Part No-370-0304 , Hex Head Bolt Part No-370-0308 , Spring Washer Part No-Mdw10sa , Flat Washer Part No-Maw10ga , Hex Nut Part No-369-0110 , Adapter Part No-907A050000020 , Bracket, Air Filter Part No-Eea0027682 , Th. Boss Part No-Eea0027216 , Hex Head Bolt Part No-370-0310 , Filter Element, Primary Part No-Eea0027698 , Filter Element, Safety Part No-Eea0027699 , Tool Kit Part No-907A070000017 , Axle Oil Part No-12Wl050000144 , Lithium Base Grease Part No-Xa1417 , Fire Extinguisher Part No-625A050000110 , Drive Screw Part No-T1000 , Engine Oil Part No-907A050000006 , Fastner Sealant Part No-00Ea000001155 , Hydraulic Oil Part No-D10a050000093 , Brake Oil Part No-917A050000049 , Centralised Lubrication System ( Automatic ) Part No-917B050000022 , Engine Coolant Part No-907A050000007 , Front Reflector Part No-12Wl040000125 , Rear Reflector Part No-12Wl040000126 , Reflective Tape ( Red ) Part No-19Wl050000631 , Reflective Tape ( White ) Part No-19Wl050000630 , Reflective Tape ( Yellow ) Part No-19Wl050000632 , O Ring Kit Part No-917A050000113 , Automatic Fire Suprression System Part No-907A070000027 , Automatic Fire Detection & Supression System Part No-19Wl050000868 , Bracket ( Fire System ) Part No-19Wl020000733 , Threaded Boss Part No-811A020000105 , Hex Head Screw Part No-Mt08lg16g , Spring Washer Part No-Mdw08sag , Hex Nut Part No-Mt08lgg , Flat Washer Part No-Maw08gag , Accumulator Charging Kit Part No-811A050000124 , Hand Pump Part No-907A050000048 , Hand Pump Part No-917A050000106 , Single Core Wire Rubber Bidding Part No-D06a050000189 , Logo-Eimco Elecon ( Engine Hood ) Part No-12Wl050000047 , Wheel Choke Part No-910A050000034 , E.M Tyre Inflating & Checking Device Lb Part No-907A050000064 , Engine Cooler Group Part No-907B070000070 , Cac Cooler Assy. Part No-907B070000071 , Cac With Radiator Part No-907B050000094 , Cac Cooler Mtg. Bracket Part No-907B020000092 , Hex Head Bolt Part No-Stdb035-16-35 , Spring Washer Part No-Mdw16sa , Hex Head Bolt Part No-Stdb035-10-35 , Spring Washer Part No-Mdw10sa , Flat Washer Part No-Maw10gab , Cac Tube, Inlet Part No-907B020000093 , Cac Silicone Hose Part No-907A050000028 , T-Bolt Hose Clamp Part No-907A050000034 , Cac Tube, Outlet Part No-907B020000094 , Elbow, Cac Part No-910A050000074 , Radiator Tube, Inlet Part No-907B020000095 , Silicone Hose, Coolant Part No-907A050000029 , Silicone Hose, Coolant Part No-Eea0027283 , T-Bolt Hose Clamp Part No-907A050000032 , Silicone Hose, Coolant Part No-907A050000030 , Silicone Hose, Coolant Part No-Eea0027284 , T-Bolt Hose Clamp Part No-907A050000033 , Radiator Tube, Outlet Part No-907B020000096 , Elbow Hose, Coolant Part No-907A050000031 , Coolant Hose Part No-Eea0027289 / 006 , Hose Clamp Part No-P9phb , Coolant Hose Part No-Eea0027287 / 004 , Hose Clamp ( Fuel Circuit ) Part No-12Wl050000172 , Nipple Part No-907A020000024 , Bonded Seal Part No-Sc011 / 016 , Coolant Hose Part No-Eea0027287 / 001 , Coolant Hose Part No-Eea0027287 / 006 , Hex Head Plug ( Bsp ) Part No-Sc036 / 004 , Bonded Seal Part No-Sc011 / 024 , Hex Head Plug ( Bsp ) Part No-Sc036 / 008 , T-Bolt ( Hose-Clamp ) ( Heavey Duty ) Part No-19Wl050000052 , Hex Head Plug ( Bsp ) Part No-Sc036 / 002 , Bonded Seal Part No-Sc011 / 009 , Sponge ( Side ) Part No-12Wl050000123 , Rubber Sheet Part No-Eea0032933 , Ball Valve ( G 1 / 2 ) Part No-Rb2c050000137 , Hose Assembly Part No-623D02584 / 113 , St.Swivel Adaptor M / F Part No-Se012 / 064 , Straight Adaptor, M / M Part No-Se012 / 084 , Tank Mounting Bracket Part No-910B020000254 , Threaded Boss ( M12 ) Part No-Eea0002561 , Threaded Boss Part No-Eea0033008 , Hex Nut Part No-369-0110 , Hex Head Bolt Part No-370-0308 , Th. Boss Part No-Eea0027216 , Flat Washer Part No-Maw10ga , Elbow, Coolant Tube Part No-910B020000178 , Bush ( Metric ) Part No-Mbh100 / 116 / 50A , Bush, Metric Part No-Mbh100 / 116 / 70A , Bush ( Metric ) Part No-Mbh90 / 106 / 100A , Pin Part No-917A060000009 , Bush ( Metric ) Part No-Mbh90 / 106 / 60A , Pin Part No-917A060000015 , Pin Part No-917A060000012 , Spherical Bearing Part No-Stdc003 / 056 , Seal Part No-Seg251 , O Ring Part No-Seg1099 , Wear Washer Part No-912B060000117 , Counter Balance Valve Part No-Eea0027160 , Valve Seal Kit Part No-Eea0028796 , Counter Balance Valve Part No-Eea0027167 , Valve Seal Kit Part No-Eea0028811 , Spherical Bearing Part No-Eea0022799 , Avm, Engine Part No-910A050000025 , Avm, Engine Part No-19Wl050000865 , Spider Assembly ( 7C ) Part No-912A050000208 , Radial Seal Ringpart No-Eea0027541 , Radial Seal Ring Part No-Eea0027555 , Spider Assy. - 6C Part No-907A050000050 , Relief Valve Assy. Part No-625B050000064 , Pres.Gauge Isolator Valve Part No-811A050000013 , Drive Oil Pressure Gauge Part No-813B000000182 , Oil Pressure Gauge Part No-917B050000080 , Hydraulic Motor Part No-Eea0027907 , Fan Part No-Eea0027905 , Lip Seal Part No-Eea0028877 , Selector Switch ( 2 Pos. ) Part No-910A040000013 , Joystick Handle ( Walvoil ) Part No-12Wl040000189 , Temperature Sensor Part No-Eea0027843 , Sensor Part No-Eea0027837 , Sensor Part No-Eea0027819 , V-Ribbed Belt Part No-Eea0027827 , Accelerator Pedal Part No-Eea0027831 , Cab Control Part No-Eea0025805 , Transmission Temp. Sensor ( 917 ) Part No-Eea0026850 , Transmission Pressure Sensor ( 917 Part No-Eea0026851 , Hyd. Motor - Cr Part No-611B050000321 , Hose Assy. Part No-Stdd026 / 301 , Gauge Adaptor Part No-811A060000088 , Oil Filter Kit Part No-907A050000055 , Bonded Seal Part No-Sc011 / 006 , Fuel Filter Insert Part No-907A050000052 , Fuel Filter Part No-907A050000053 , Fuel Filter Insert Part No-907A050000054 , Minimess Coupling Part No-822A050000031 , Service Control Valve Part No-917B050000015 , Repair Kit ( Accumulator Charge Valve ) Part No-Eea0025349 , Twin Oil Cooler Part No-917B050000021 , Power Relay ( 24V ) Part No-19Wl040000115 , Base For Change Over Relay Part No-12Wl040000024 , Fuel Tank Cap With Neck Part No-907A050000068 , Suspension Tube Type-A Part No-Clsa020000034 , Cac With Radiator Part No-907B050000023 , Radiator Cooler Matrix ( 115Kw ) Part No-Eea0027908 , Seal Kit Part No-Eea0029259 , Transmission Control Unit ( Econ.A312 ) Part No-Eea0028730 , Tcu Harness ( Apc - 312 ) Part No-Eea0033374 , Cooler Fan, Sucker Part No-907B050000095 , Piston Part No- 201C000000054 Model-21 , Comp. Ring Part No- 201A000000072 Model-21 , Oil Ring Part No- 201A000000073 Model-21 , Connecting Rod Part No- 201E000000053 Model-21 , Retaining Ring Part No- 201A000000048 Model-21 , Bushing Part No- 201A000000049 Model-21 , Hex Head Bolt Part No- T8hg24 Model-21 , Crank Sleeve Part No- 201B000000759 Model-21 , Crank Shaft Part No- 201M000000087 Model-21 , Bearing Part No- G201 Model-21 , Vent Cap Assy Part No- 200M000000084 Model-21 , Valve And Housing Group Part No- 201M000000110 Model-21 , Valve Housing Cover Part No- 201B000000066 Model-21 , Valve Housing Gasket Part No- 201A000000065 Model-21 , Gasket For Motor Housing Part No- 021A000000196 Model-21 , Wrist Pin Assembly Part No- 201M000000086 Model-21 , Hex Head Bolt Part No- T8gg16 Model-21 , Cylinder Part No- 201C000000744 Model-21 , Cylinder Gasket Part No- 201A000000064 Model-21 , Gasket Set Part No- 201M000000637 Model-21 , Valve Housing Part No- 201M000000090 Model-21 , Gasket, Cover Part No- 021D000000182 Model-21 , Seal Part No- S1301 Model-21 , Shim Set Part No- Ga62a Model-21 , Axle Bearing Cap Part No- 021C000000181 Model-21 , Motor Pinion Part No- 021B000000198 Model-21 , Motor Pinion Spacer Part No- 021A000000197 Model-21 , Bearing Part No- G132 Model-21 , Motor Pinion Assy Part No- 021M000000114 Model-21 , Clutch Group Part No- 021M000003075 Model-21 , Clutch Shaft Assy Part No- 021M000003076 Model-21 , Bearing Part No- G135 Model-21 , Clucth Thrust Washer Part No- 021A000003082 Model-21 , Clucth Coller Assy Part No- 021M000000148 Model-21 , Clutch Jaw Part No- 021B000003081 Model-21 , Key Part No- Kwt Model-21 , Clutch Pinion Assy. Part No- 021M000003078 Model-21 , Clucth Gear Part No- 021C000003080 Model-21 , Clutch Rod Part No- 012A000000029 Model-21 , Spring Part No- Za63 Model-21 , Seal Rod Part No- 021A000000030 Model-21 , Shim Set Part No- Gb32a Model-21 , Lower Deck Intermediate G Part No- 021M000000115 Model-21 , Lower Deck Intermediate Part No- 021M000000116 Model-21 , L.D.Gear Part No- 021B000000016 Model-21 , Key Part No- Kwv Model-21 , L.D.Int.Pinion Part No- 021B000000035 Model-21 , Lower Deck Idler Group Part No- 021M000000117 Model-21 , Lower Deck Idler Shaft As Part No- 021M000000118 Model-21 , Bearing Part No- G140 Model-21 , Shaft-L.D.Gear Part No- 021B000000036 Model-21 , L.D.Idler Gear Part No- 021B000000017 Model-21 , Axle Gear Part No- 021B000000178 Model-21 , Key Part No- Kw36 Model-21 , Axle Guage - 610 Mm Part No- 021A000000211 Model-21 , King Bolt Type B Part No- 021M000000160 Model-21 , Centering Roller Group Part No- 021M000001708 Model-21 , Hex Nut, Slotted Part No- T16gv Model-21 , Roller Assy Part No- 024M000000819 Model-21 , Anchor Roller Centering Part No- 021B000001707 Model-21 , Ball Race, Ud Part No- 021C000000150 Model-21 , Balls Part No- Gr16 Model-21 , Ball Race, Ld Part No- 021C000000151 Model-21 , Ud Gr Housing Covr Gasket Part No- 021C000000042 Model-21 , Upper Deck Idler Shaft Assy. Part No- 021M000000123 Model-21 , Upper Deck Idler Shaft Part No- 021A000000037 Model-21 , U.D.Idler Gear Part No- 021B000000018 Model-21 , Upper Deck Intermediate G Part No- 021M000000124 Model-21 , Upper Deck Inter. Shaft A Part No- 021M000000125 Model-21 , Gear Part No- 021B000000019 Model-21 , Woodruff Key Part No- Kw29 Model-21 , U.D.Int.Shaft & Pinion Part No- 021A000000038 Model-21 , Bearing Part No- G138 Model-21 , Chain Reel Group Part No- 021M000000126 Model-21 , Chain Reel Shaft Assy Part No- 021M000000127 Model-21 , Chain Reel Gear Part No- 021B000000020 Model-21 , Chain Reel Shaft Part No- 021B000000039 Model-21 , Key Part No- Kw34 Model-21 , Bearing Part No- G144 Model-21 , Bearing Part No- G145 Model-21 , Seal Part No- S265 Model-21 , Chain Reel Part No- 021C000000014 Model-21 , Chain Link Pin Part No- 012A000000041 Model-21 , Spring Washer Part No- W6gf Model-21 , Chain Roller Assy Part No- 021M000000132 Model-21 , Hex Nut Part No- T24gg Model-21 , Chain Roller Shaft Part No- 021B000000052 Model-21 , Roller, Bucket Chain Part No- 021A000000053 Model-21 , Lock Washer Part No- L49 Model-21 , Lock Nut Part No- L819 Model-21 , Bearing Part No- G121 Model-21 , Grease Nipple Part No- Bp1fg Model-21 , Linkage Pin Cen.Drum Levr Part No- 021A000000046 Model-21 , Bush, Centring Drum Linkage Part No- 021A000000045 Model-21 , Hex Nut Part No- T20gg Model-21 , Centering Drum Lever Part No- 021C000000043 Model-21 , Seal Part No- S219 Model-21 , Bearing Cup Part No- G510 Model-21 , Bearing Cone Part No- G511 Model-21 , Shim Set Part No- Gb80a Model-21 , Hex Head Bolt Part No- T10gg24 Model-21 , Centering Drum Cover Gasket Part No- 021A000000051 Model-21 , Hex Nut Part No- T18gg Model-21 , Spring Washer Part No- W18gf Model-21 , Thrust Stop Part No- 021B000000068 Model-21 , Bumper Spring Clamp Part No- 021A000000070 Model-21 , Bumper Spring Part No- 021A050000003 Model-21 , Spring Washer Part No- W8gf Model-21 , Hex Nut Part No- T8gg Model-21 , Hex Head Bolt Part No- T6gg32 Model-21 , Spring Part No- 012A000000085 Model-21 , Bucket Handle Part No- 012D000000084 Model-21 , Traction Valve Lever Part No- 012B000000093 Model-21 , Balance Spring Part No- 012A000000094 Model-21 , Spring Washer Part No- W5gf Model-21 , Hex Nut Part No- T5hg Model-21 , Hex Head Bolt Part No- T6gg24 Model-21 , Handle Assy Part No- 012M000000141 Model-21 , Traction Control Handle Part No- 012B000000096 Model-21 , Traction Handle Retainer Part No- 012B000000099 Model-21 , Traction Pivot Bushing Part No- 012A000000097 Model-21 , Shim Set Part No- Ga31a Model-21 , Pivot Handle Part No- 012A000000098 Model-21 , Traction Bonnet Group Part No- 012M000000140 Model-21 , Traction Valve Bonnet Part No- 012C000000090 Model-21 , Gasket Part No- Sga30 Model-21 , Valve Stem Part No- 012A000000088 Model-21 , Traction Valve Disc Part No- 012B000000086 Model-21 , Valve Disc Spring Part No- 012A000000081 Model-21 , Bucket Bonnet Group Part No- 021M000000139 Model-21 , Valve Stem Part No- 012A000000082 Model-21 , Bucket Valve Disc Part No- 012C000000079 Model-21 , Swivel Sleeve Assy Part No- 012M000000138 Model-21 , Air Screen Part No- 012A000000076 Model-21 , Swivel Gasket Part No- 012A000000077 Model-21 , Drain Cock Part No- Bp3rvd Model-21 , Gasket Part No- Sga36 Model-21 , Bonnet Part No- 021D000000080 Model-21 , Grease Nipple Part No- Bp1fg Model-21 , Hex Nut Part No- T8gg Model-21 , Traction Air Hose Assy Part No- 021M000000270 Model-21 , Hex Nut, Nyloc Part No- L211 Model-21 , Flat Washer Part No- W12ga Model-21 , Cable Spring Part No- 021A000000297 Model-21 , Rocker Arm Cable Long Part No- 021B000000290 Model-21 , Rocker Arm Cable Short Part No- 021B000000295 Model-21 , End Link Pin Part No- 021A000000040 Model-21 , Split Pin Part No- L119 Model-21 , End Link Part No- 021A000000057 Model-21 , Bucket Chain Assy Part No- 021M000000134 Model-21 , Chain Repair Kit Part No- 021M000000939 Model-21 , Bucket Bottom, Casting Part No- 021A030000011 Model-21 , Bucket Assy. ( Type48 ) Part No- 021M000002620 Model-21 , Air Motor Assy. Part No- 201M000000091 Model-21 , Piston Group Assy Part No- 201M000000085 Model-21 , Crank Shaft Group Part No- 201M000000088 Model-21 , Plain Crankshaft Assembly Part No- 201M000000760 Model-21 , Rotary Valve Assembly Part No- 201M000000089 Model-21 , Axle Cap ( 18-30 Ga. ) Part No- 021M000000253 Model-21 , L.D. Motor Pinion Part No- 150B060000001 Model-150 , Spacer Part No- 012A000000197 Model-150 , Bearing Part No- G130 Model-150 , L.D. Pinion Part No- 150B060000002 Model-150 , Bearing Part No- G132 Model-150 , Gear Part No- 021C000003080 Model-150 , Key Part No- Kw29 Model-150 , Gear Part No- 021B000000016 Model-150 , Bearing Part No- G135 Model-150 , Gear Part No- 150B060000005 Model-150 , Axle Cap Part No- 021C000000181 Model-150 , Shim Set Part No- Ga62a Model-150 , Seal Part No- S1301 Model-150 , Hub Part No- 150C060000009 Model-150 , Wheel Tyre Assy. Part No- 150M100000004 Model-150 , Key Part No- K12r66 Model-150 , Drain Cock Part No- Bp2rve Model-150 , Hex Head Bolt Part No- T10gg24 Model-150 , Washer Part No- W10gf Model-150 , Key Part No- Kwt Model-150 , Bolt Part No- T8gsk8 Model-150 , Bolt Part No- T10gg28 Model-150 , Axle Nut Part No- 021A000000185 Model-150 , Washer Part No- 021A000000184 Model-150 , Wheel Stud Part No- 802A000000708 Model-150 , Wheel Nut Part No- 802A000000709 Model-150 , Wheel Nut Part No- L262t Model-150 , Gasket Part No- 012A000000196 Model-150 , Washer Part No- W6gf Model-150 , Cap Screw Part No- T6gg28 Model-150 , Cap Screw Part No- T6gg24 Model-150 , Gasket Part No- 200A000000065 Model-150 , Valve Housing Cover Part No- 200A000000066 Model-150 , Cap Screw Part No- T6gg64 Model-150 , Cap Screw Part No- T6gg14 Model-150 , Gasket Part No- 200A000000064 Model-150 , Cylinder Part No- 200C000000050 Model-150 , Washer Part No- 200A000000099 Model-150 , Cap Screw Part No- T7gg16 Model-150 , Wrist Pin Part No- 200M000000086 Model-150 , Oil Ring Part No- 200A000000073 Model-150 , Comp. Ring Part No- 200A000000072 Model-150 , Piston Part No- 200C000000054 Model-150 , Connecting Rod Part No- 200D000000053 Model-150 , Connecting Rod Bushing Part No- 200A000000049 Model-150 , Retainer Ring Part No- 200A000000048 Model-150 , Bearing Part No- G200 Model-150 , Valve Housing Assy Part No- 200M000000090 Model-150 , Rotary Valve Assy Part No- 200M000000089 Model-150 , Air Motor Part No- 270M000000006 Model-150 , Bearing Part No- G107 Model-150 , Bush Part No- 150A060000011 Model-150 , U D Idler Gear Part No- 012B000000018 Model-150 , Pinionpart No- 012A000000038 Model-150 , U D Intetmediate Gear Part No- 012B000000019 Model-150 , Chain Reel Shaft Part No- 012B000000039 Model-150 , Bearing Part No- G138 Model-150 , Chain Reel Gear Part No- 012B000000020 Model-150 , Bearing Part No- G142 Model-150 , Chain Reel Part No- 150C030000001 Model-150 , Seal Part No- S197 Model-150 , Chain Link Pin Part No- 012A000000041 Model-150 , Gasket Part No- 012B000000042 Model-150 , Shim Set Part No- Ga16ax Model-150 , Chain Roller Shaft Part No- 630B000000081 Model-150 , Roller Part No- 630C000000083 Model-150 , Chain Assy. Part No- 021M000000133 Model-150 , End Link Pin Part No- 021A000000040 Model-150 , Cotter Pin Part No- L119 Model-150 , End Link Part No- 021A000000057 Model-150 , Spring Part No- 012A000000069 Model-150 , Bolt Part No- T6gg16 Model-150 , Bolt Part No- T8gg24 Model-150 , Washer Part No- W8gf Model-150 , Bolt Part No- T10gg20 Model-150 , Bolt Part No- T12gg48 Model-150 , Bolt Part No- T12gg20 Model-150 , Washer Part No- W12gf Model-150 , Washer Part No- W20gf Model-150 , Cap Screw Part No- T8gg20 Model-150 , Gasket Part No- Sga32a Model-150 , Seal Part No- S2300 Model-150 , Cap Screw Part No- T6ggw16 Model-150 , Cap Screw Part No- T6gg20 Model-150 , Bearing Part No- G280 Model-150 , Crank Shaft Part No- 200M000000517 Model-150 , Rotary Valve Part No- 270D000000002 Model-150 , Valve Housing Part No- 270D000000003 Model-150 , Bearing Part No- G2003 Model-150 , Bearing Part No- G2004 Model-150 , Bucket Part No- 150E020000094 Model-150 , Bucket Lip Part No- Eea0004865 Model-150 , Seal Part No- S300 Model-150 , Bush Part No- Ibh48 / 56 / 48A Model-150 , Cap Screw Part No- T8gh24 Model-150 , Nut Part No- T10gg Model-150 , Flat Washer Part No- W24gab Model-150 , Connecting Link Part No- 150B020000022 Model-150 , Bolt Part No- T4gg8 Model-150 , Locking Plate Part No- Sc009 / 003 Model-150 , Locking Plate Part No- Sc009 / 002 Model-150 , Pin Part No- 150A060000016 Model-150 , Spring Bush Part No- Ibh24 / 32 / 16A Model-150 , Nut Part No- T8gg Model-150 , Pin Part No- 150A060000015 Model-150 , Bolt Part No- T4gg16 Model-150 , Lock Washer Part No- W4gf Model-150 , Bolt Part No- T12gg28 Model-150 , Nut Part No- T12gg Model-150 , Pneumatic Cyl. Part No- 150B050000043 Model-150 , Pin Part No- 150A060000014 Model-150 , Seal Kit ( Suitable For # 150M10000005 ) Part No- Eea0000690 Model-150 , Nipple Part No- Bp8fna Model-150 , Union Elbow Part No- Bp8bsl Model-150 , Adaptor Part No- Se012 / 085 Model-150 , Manifold Part No- 150B020000028 Model-150 , Elbow Part No- Se012 / 026 Model-150 , Adaptor Part No- Se012 / 086 Model-150 , Adaptor Part No- Se012 / 007 Model-150 , Elbow Part No- Bp6bl Model-150 , Pipe Part No- Bp6fn28 Model-150 , Elbow Part No- Bp6bl Model-150 , Pipe Part No- Bp6fn40 Model-150 , Hose Assy Part No- 623D02584 / 230 Model-150 , Adaptor Part No- Se012 / 006 Model-150 , Adaptor Part No- Se012 / 097 Model-150 , Elbow Part No- Se012 / 027 Model-150 , Hose Assy Part No- 623D02584 / 238 Model-150 , Hose Assy Part No- 623D02584 / 242 Model-150 , Allen Bolt Part No- 370-2235 Model-150 , Washer Part No- Mdw08sa Model-150 , Nut Part No- 369-0108 Model-150 , Bolt Part No- 370-0264 Model-150 , Adaptor Part No- Se012 / 046 Model-150 , Adaptor Part No- Se012 / 066 Model-150 , Union Part No- Bp6bs Model-150 , Hose Clip Part No- P9phb Model-150 , Pn.Control Valve ( 1 / 2Bsp ) Part No- Eeb0010031 Model-150 , Gear Part No- 150C060000019 Model-150 , Side Ring Part No- 802B060000003 Model-150 , Locking Ring Part No- 802B060000002 Model-150 , Seal Part No- S115 Model-150 , Motor Pinion Part No- 150B060000018 Model-150 , Retaining Ring Part No- L1118 Model-150 , Circlip Part No- L1166 Model-150 , Gasket Part No- Sga24a Model-150 , Gasket Part No- 150B050000024 Model-150 , Gasket Part No- 150B050000025 Model-150 , Motor Pinion Part No- 150B060000031 Model-150 , Spacer Part No- 150A060000032 Model-150 , Shaft Part No- 150A060000035 Model-150 , Pinion Part No- 150B060000033 Model-150 , Bearing Part No- 150A050000029 Model-150 , Gear Part No- 150B060000034 Model-150 , Key Part No- Mk64r40 Model-150 , Key Part No- Mk75r56 Model-150 , Shim Set Part No- 150A050000026 Model-150 , Pinion Part No- 150B060000037 Model-150 , Gear Part No- 150B060000038 Model-150 , Shaft Part No- 150A060000040 Model-150 , Bearing Housing Part No- 150B060000036 Model-150 , Gear Part No- 150B060000041 Model-150 , Axle Part No- 150C060000043 Model-150 , Gear Part No- 150B060000044 Model-150 , Spacer Part No- 150A060000042 Model-150 , Bearing Part No- 150A050000030 Model-150 , Seal Part No- Seg242 Model-150 , Shim Set Part No- 150A050000027 Model-150 , Hub Part No- 150C060000054 Model-150 , Wheel Rim Assy Part No- 150D050000021 Model-150 , Tube Part No- 802A050000002 Model-150 , Flap Part No- 802A050000003 Model-150 , Bkt.Chain Roller Part No- 021A000000053 Model-150 , Pin Part No- 150B060000060 Model-150 , Spacer Part No- 150A060000062 Model-150 , Bearing Part No- G121 Model-150 , Gasket Part No- 150B050000023 Model-150 , Motor Pinion Part No- 150B060000047 Model-150 , Spacer Part No- 150A060000061 Model-150 , Seal Part No- Seg170 Model-150 , Shaft Part No- 150A060000049 Model-150 , Gear Part No- 150B060000048 Model-150 , Pinion Part No- 150B060000051 Model-150 , Key Part No- Mk60r45 Model-150 , Gear Part No- 150B060000050 Model-150 , Chain Reel Shaft Part No- 150B060000053 Model-150 , Seal Part No- Seg203 Model-150 , Gear Part No- 150B060000052 Model-150 , Key Part No- Mk66r63 Model-150 , Bumper Spring Part No- 150A050000022 Model-150 , Cylinder Part No- 150B020000108 Model-150 , Pin Part No- 150A060000056 Model-150 , Lock Plate Part No- 150A020000112 Model-150 , Keeper Plate Part No- Lka24a Model-150 , Bearing Part No- 150A050000028 Model-150 , Circlip Part No- 912A050000006 Model-150 , Pin Part No- 150B060000058 Model-150 , Spacer Part No- 150A060000057 Model-150 , Chain Assy Part No- 150B070000021 Model-150 , Bumper Spring Clamp Part No- 021A000000070 Model-150 , Pin Part No- Mkd25a66 Model-150 , Bush Part No- Ibh32 / 40 / 32A Model-150 , Spacer Part No- 150A020000047 Model-150 , Spring Part No- 824A000000277 Model-150 , Spacer Part No- Gsa8d Model-150 , Gasket Part No- 824B000000215 Model-150 , Bush Part No- Sd001 / 014 Model-150 , Link Part No- 623A000003189 Model-150 , Link Part No- 623A000003190 Model-150 , Pin Part No- 623A000003191 Model-150 , Pin Part No- 623A000003856 Model-150 , Hose Assy Part No- Stdd018 / 108 Model-150 , Hose Assy Part No- Stdd018 / 223 Model-150 , Hose Assy Part No- Stdd018 / 226 Model-150 , Hose Assy Part No- Stdd018 / 246 Model-150 , Hose Assy Part No- Stdd018 / 250 Model-150 , Wheel Stud Part No- 150A060000064 Model-150 , Wheel Nut Part No- 150A060000065 Model-150 , Lock Nut Part No- 803B000000488 Model-150 , Collar Assy Part No- 00Eb000000037 Model-150 , Arm ( L H ) Part No- 150D020000099 Model-150 , Arm ( R H ) Part No- 150D020000100 Model-150 , Lock Nut Part No- L274 Model-150 , Pn.Control Valve ( 1 / 2Bsp ) Part No- Eeb0010031 Model-150 , Motor Pinion Part No- 150B060000039 Model-150 , Cover, Lower Deck Gear Bo Part No- 150B020000113 Model-150 New , Cover, L.D.Gear Box Part No- 150B020000114 Model-150 New , Bearing Housing Part No- 150B060000046 Model-150 New , Bearing Housing Part No- 150B060000045 Model-150 New , Air Motor Arrangement Part No- 270M100000004 Model-150 New , Valve Housing Group Part No- 270M000000194 Model-150 New , Complete Crankshaft Group Part No- 200M000000530 Model-150 New , Piston Group Part No- 200M000000085 Model-150 New , Motor Housing Assembly Part No- 270M000000007 Model-150 New , Crank Sleeve Part No- 200B000000047 Model-150 New , Upper Deck Part No- 150D020000102 Model-150 New , Upper Deck Gear Box Part No- 150D020000101 Model-150 New , Gear Box Part No- 150D020000098 Model-150 New , Hopper Assy Part No- 150B070000074 Model-150 New , Hopper Support Bracket Part No- 150D020000110 Model-150 New , Upper Deck Gbox Assy. Part No- 150M100000055 Model-150 New , Guard, Upper Deck Part No- 150B020000049 Model-150 New , Hopper-Lh Part No- 150B020000136 Model-150 New , Hopper-Rh Part No- 150B020000137 Model-150 New , Hopper Door Part No- 150B020000134 Model-150 New , Side Plate, Rh Part No- 150B020000052 Model-150 New , Side Plate, Lh Part No- 150B020000053 Model-150 New , Shaft Part No- 803B000000004 Model-824 , Gear ( Model 824 ) Part No- 803B000000182 Model-824 , Key Part No- K58r40 Model-824 , Motor Pinion Spacer Part No- 021A000000197 Model-824 , Tab Washer Part No- 803A000000441 Model-824 , Gear Part No- 803B000000183 Model-824 , Bearing Part No- G140 Model-824 , Shaft Part No- 803B000000007 Model-824 , Gear Part No- 803B000000008 Model-824 , Bearing Part No- G142 Model-824 , Key Part No- K60r40 Model-824 , Gear Part No- 803B000000010 Model-824 , Bearing Part No- G144 Model-824 , Shaft Part No- 803B000000011 Model-824 , Gasket Part No- 803A000000223 Model-824 , Bearing Part No- G138 Model-824 , Key Part No- K12r66 Model-824 , Hex Socket Set Screw Part No- T10gs12 Model-824 , Shaft Assy Part No- 803M000000304 Model-824 , Bearing Part No- G146 Model-824 , Bearing Part No- 803A000000019 Model-824 , Bearing Cup Part No- G484 Model-824 , Bearing [ Cone ] Part No- 803A000000022 Model-824 , Key Part No- K64r58 Model-824 , Gear Part No- 803B000000012 Model-824 , Bearing Part No- G427 Model-824 , Bearing Cup Part No- G444 Model-824 , Oil Seal Part No- 803A000000020 Model-824 , Gasket Part No- 803D000000003 Model-824 , Shim Set Part No- 803B000000016 Model-824 , Plug Part No- 1027A050000003 Model-824 , Axle Cap Part No- 00Eb000000094 Model-824 , Gear Box Cover Part No- 00Ec000000131 Model-824 , Key Part No- K60r36 Model-824 , Spacer Part No- 803A000000124 Model-824 , Sealing Plate Part No- 803B000000015 Model-824 , Square Head Plug Part No- P9bp Model-824 , Dowel Pin Part No- 012A000001102 Model-824 , Spacer Part No- 803A000000121 Model-824 , Spacer Part No- 803A000000122 Model-824 , Spacer Part No- 803A000000123 Model-824 , Washer Part No- 621A000000074 Model-824 , Hex Nut, Nyloc Part No- L274 Model-824 , Lock Nut Part No- 803B000000488 Model-824 , Wheel Stud Part No- 802A000000708 Model-824 , Hex Nut, Nyloc Part No- L262t Model-824 , Wheel Nut Part No- 802A000000709 Model-824 , Upper Deck Assy. Part No- 824M000000324 Model-824 , Slotted Bolt ( A Size ) Part No- 824B000000415 Model-824 , Wedge Part No- 824B000000416 Model-824 , Spring Washer Part No- W10gf Model-824 , Hex Nut Part No- T10gg Model-824 , Hex Nut, Slotted Part No- T24gk Model-824 , Cotter Pin Part No- L153 Model-824 , Stud Part No- 00Ea000000122 Model-824 , Side Sheet-Lh Part No- 824C000000327 Model-824 , Side Sheet-Rh Part No- 824C000000328 Model-824 , Bumper Bar Assy. Part No- 824M000000113 Model-824 , Hex Nut Part No- T14gg Model-824 , Spring Washer Part No- W14gf Model-824 , Lock Plate For Model 824 Part No- 00Ea000000168 Model-824 , Taper Wedge Part No- 00Ea000000158 Model-824 , Spring Washer Part No- W16gf Model-824 , Gear Box Assy.-Bucket Drive Part No- 824M000000334 Model-824 , Upper Chain Roller Assy Part No- 824M000000193 Model-824 , First Intermediate Pinion Part No- 630B000000247 Model-824 , Gear Chain Reel Bucket Drive Part No- 630C000000248 Model-824 , Bearing Cartridge Part No- 630B000000272 Model-824 , Brg.Cartridge Chain Reel Shaft Part No- 630C000000274 Model-824 , 1St Int.Brg.Cartridge Part No- 630B000000275 Model-824 , Gasket, Motor Pinion Cap Part No- 630A000000290 Model-824 , Gasket, Bucket Drive Cover Part No- 630C000000292 Model-824 , Chain Reel Part No- 004C000000169 Model-824 , Chain End Pin Lock Part No- 004A000000182 Model-824 , Intermediate Gear Part No- 824C000000041 Model-824 , Chain Roller Assy Part No- 021M000000132 Model-824 , Bearing Part No- G204 Model-824 , Bucket Drive Hsg.Cover Plate Part No- 824E000000420 Model-824 , Motor Pinion Bucket Drive Part No- 824B000000040 Model-824 , Bearing Part No- G448 Model-824 , Bearing Cone Part No- G449 Model-824 , Bearing Part No- G546 Model-824 , Bearing Part No- G547 Model-824 , Bearing Part No- G548 Model-824 , Bearing Part No- G549 Model-824 , Bearing Part No- G562 Model-824 , Bearing Part No- G563 Model-824 , Brass Shim Set Part No- G1214 Model-824 , Shim Set Part No- G1215 Model-824 , Shim Set Part No- G1227 Model-824 , Seal Part No- S300 Model-824 , Key Part No- K10e60 Model-824 , Key Part No- K12e58 Model-824 , Key Part No- K8r34 Model-824 , Hex Head Bolt Part No- T8ggw20 Model-824 , Hex Head Bolt Part No- T8ggw16 Model-824 , Inter.Gear For Buc.Drive Part No- 630C000000245 Model-824 , 2Nd Int.Pinion Bucket Drive Part No- 630C000000249 Model-824 , Bearing Cone Part No- G533 Model-824 , Bearing Cup Part No- G534 Model-824 , Bearing Cone Part No- G531 Model-824 , Bearing Cup Part No- G532 Model-824 , Key Part No- K12e28 Model-824 , Chain Real Shaft Part No- 630C000000258 Model-824 , Square Head Plug Part No- Bp2bp Model-824 , Pipe Plug Part No- Bp6bp Model-824 , Plug, Csk Square Part No- Bp5bpa Model-824 , Chain Roller Shaft Part No- 630B000000081 Model-824 , Shim Set Part No- Ga16ax Model-824 , Bearing Cone Part No- G403 Model-824 , Bearing Cup Part No- G416 Model-824 , Chain Roller Part No- 630C000000083 Model-824 , Gasket Part No- Sga32a Model-824 , Seal Part No- S2300 Model-824 , Grease Fitting Part No- P2fg Model-824 , Retainer Plate Part No- 630A000000138 Model-824 , Chain Roller Cap Part No- 630B000000084 Model-824 , Chain Roller Shaft Part No- 021B000000052 Model-824 , Bearing Part No- G121 Model-824 , Roller, Bucket Chain Part No- 021A000000053 Model-824 , Lock Washer Part No- L49 Model-824 , Lock Nut Part No- L819 Model-824 , Spring Washer Part No- W24gf Model-824 , Hex Nut Part No- T24gg Model-824 , Bucket Chain Part No- 824M000000157 Model-824 , Bucket Chain Assy Part No- 630M000002361 Model-824 , End Link Pin Part No- 621A000000666b Model-824 , Cylinder Assy Part No- 803M000000099 Model-824 , Collar Assy Part No- 00Eb000000037 Model-824 , Rocker Arm Cable Part No- 630B000002487 Model-824 , Cable Spring Part No- 630A000000042 Model-824 , Bumper Spring Part No- 024B000000220 Model-824 , Pin Part No- 803B000000138 Model-824 , Cable Pin Part No- Hra196 Model-824 , Hex Nut, Nyloc Part No- L213 Model-824 , Cotter Pin Part No- L163 Model-824 , Rocker Arm R.H. Part No- 824M000000380 Model-824 , Rocker Arm L.H. Part No- 824M000000378 Model-824 , Rocker Arm Yoke Bar Part No- 824D000000101 Model-824 , Air Motor Assy Part No- 201M000005046 Model-824 , Gasket For Motor Housing Part No- 021A000000196 Model-824 , Wrist Pin Assembly Part No- 201M000000086 Model-824 , Cylinder Part No- 201C000000744 Model-824 , Cylinder Gasket Part No- 201A000000064 Model-824 , Bearing Part No- G267 Model-824 , O Ring Part No- 621A000000545 Model-824 , Valve Housing Cover Part No- 271C000000020 Model-824 , Ext Circlip 5100-255 Part No- L1126 Model-824 , Bearing Part No- G134 Model-824 , Oil Ring Part No- 201A000000073 Model-824 , Piston Part No- 201C000000054 Model-824 , Comp. Ring Part No- 201A000000072 Model-824 , Vent Cap Assy Part No- 200M000000084 Model-824 , Drain Cock, Valve Part No- Bp2rve Model-824 , Plug, Sq.Head Part No- P2fp Model-824 , Crank Shaft Group Plain Part No- 201M000000465 Model-824 , Bearing Part No- G278 Model-824 , Bushing Part No- 201A000000049 Model-824 , Crank Sleeve Part No- 201B000000759 Model-824 , Retaining Ring Part No- 201A000000048 Model-824 , Connecting Rod Part No- 201E000000053 Model-824 , Bearing Adaptor Part No- 201A000000733 Model-824 , Crank Shaft Assy Part No- 201M000000761 Model-824 , Hex Head Bolt Part No- T8hg24 Model-824 , Cap Screw Washer Part No- 201A000000099 Model-824 , Rotary Valve Part No- 271D000000002 Model-824 , Valve Housing Part No- 271E000000004 Model-824 , Motor Housing Part No- 201E000000763 Model-824 , Pitcher Tee Part No- 623A000002559 Model-824 , Elbow M / F Taper Seat Part No- Bp7bsla Model-824 , Sediment Trap Assy. Part No- 623M000002511 Model-824 , Union Elbow, 90 Degree F / F Part No- Bp7bsl Model-824 , Union Part No- Bp7bsa Model-824 , Union, Female Part No- Bp7bs Model-824 , Elbow, Std.90 Degree F / F Part No- Bp7bl Model-824 , Elbow Std 45 Deg. Part No- P9bla Model-824 , Elbow Street, 45 Degree M / F Part No- Bp7blc Model-824 , Close Nipple Part No- Bp9fna Model-824 , Nipple Part No- Bp7fna Model-824 , Elbow, 45 Degree F / F Part No- Bp7bla Model-824 , Stand Pipe Part No- 623A000002655 Model-824 , Hose Clip Part No- P105phb Model-824 , Stand Pipe ( 1 1 / 4 Bspt ) Part No- 621A000000202 Model-824 , Hose Clamp Part No- P9phb Model-824 , Hose Clip Part No- P13phb Model-824 , Hose Clamp Part No- P10phb Model-824 , Nipple Part No- Bp7fn40 Model-824 , Nipple Part No- Bp7fn32 Model-824 , Nipple Part No- Bp7fn20 Model-824 , Nipple Part No- Bp7fn28 Model-824 , Nipple Part No- Bp7fn44 Model-824 , Nipple Part No- Bp7fn48 Model-824 , Nipple Part No- Bp9fn30 Model-824 , Nipple Part No- Bp7fn34 Model-824 , Air Control Valve Assy Part No- 824M000000272 Model-824 , Air Control Valve Assy. Part No- 824M000000274 Model-824 , Control Handle Assy Part No- 623C000003187 Model-824 , Control Handle Assy.L.H. Part No- 623C000003195 Model-824 , Link Part No- 623A000003189 Model-824 , Link Part No- 623A000003190 Model-824 , Pin Part No- 623A000003191 Model-824 , Pin Part No- 623A000003856 Model-824 , Valve Manifold ( Traction ) Part No- 824C000000267 Model-824 , Tab Washer Part No- Sd014 / 019 Model-824 , E Clip - 9 Mm Part No- Sc020 / 012 Model-824 , Valve Manifold Part No- 824C000000294 Model-824 , Control Handle Part No- 824C000000295 Model-824 , Air Control Vlv Assy-Service Part No- 824B070000011 Model-824 , Latch Part No- 824B000000268 Model-824 , Valve Handle Grip Part No- 621A000000110 Model-824 , Cap Part No- 024B000000794 Model-824 , Spacer Part No- Gsa8d Model-824 , Spring Part No- 824A000000277 Model-824 , Hex Socket Head Cap Screw Part No- T8gmn32 Model-824 , Gasket For Cont.Valvebody Part No- 824B000000215 Model-824 , Bush Part No- Sd001 / 014 Model-824 , Flat Washer Part No- W8ga Model-824 , Spring Washer Part No- W6gf Model-824 , Valve End Plate. Part No- 824M000000269 Model-824 , Swivel Assy Part No- 623M000004263 Model-824 , Oiler Head Assy Part No- 623M000002749 Model-824 , Screen Oiler Cap Part No- 630A000000273 Model-824 , Oiler Filler Plug Part No- 630A000000271 Model-824 , Drain Cock Part No- Bp3rvd Model-824 , Air Screen Part No- 012A000000076 Model-824 , Lock Washer Part No- Lla5 Model-824 , Gasket Part No- Sga24a Model-824 , Flat Washer Part No- Wa1 Model-824 , Flat Washer Part No- Wa2 Model-824 , Bucket Bottom, Cast Part No- 824D000000229 Model-824 , Bucket Assy. ( 0.425 Cu.M. ) Part No- 824M000000231 Model-824 , Hull Group Part No- 824M100000013 Model-824 New , Basic Gear Box Part No- 824M100000014 Model-824 New , Square Head Plug Part No- P4bp Model-824 New , Gear Box Part No- 824M000000314 Model-824 New , Spacer ( Large ) Part No- 824B000000401 Model-824 New , Spacer ( Small ) Part No- 824B000000402 Model-824 New , Tab Washers Part No- Sd014 / 065 Model-824 New , Tab Washers Part No- Sd014 / 013 Model-824 New , Tab Washer Part No- Sd014 / 063 Model-824 New , Wheel Assy. Part No- 824A070000012 Model-824 New , Tyre 7.00X12x14 Ply Part No- 824A050000006 Model-824 New , Upper Deck Group Part No- 824B070000013 Model-824 New , Motor Mtg. Cover Part No- 201C000005043 Model-824 New , Motor Housing Assy Part No- 201M000000762 Model-824 New , Hex Head Plug ( Bsp ) Part No- Sc036 / 009 Model-824 New , Crank Shaft Group Part No- 201M000005052 Model-824 New , Bucket Drive Housing Part No- 824E000000333 Model-824 New , Upper Deck Part No- 824C020000033 Model-824 New , Rail Thrust End-Rh Part No- 824D000000344 Model-824 New , Rail Thrust End-Lh Part No- 824D000000345 Model-824 New , Rocker Arm Group Part No- 824M000000382 Model-824 New , Pneumatic Control Group Part No- 824B070000016 Model-824 New , Oiler Bottle Assy. Part No- 630M000005161 Model-824 New , Air Control Valve Assy.-Traction Part No- 824B070000014 Model-824 New , Air Control Valve , Service Part No- 824B070000015 Model-824 New , Ball Valve Part No- 150A050000039 Model-824 New , Needle Valve Part No- 150A050000033 Model-824 New , Tee, Special Part No- 824A020000024 Model-824 New , Tee, Reducing Branch Part No- Bp8bts7 Model-824 New , Coupling Part No- Stdd017 / 012 Model-824 New , Bearing Cup / Cone Part No- G484 / 803A000000022 , Bearing Cup / Cone Part No- G427 / 444 , Bearing Cup / Cone Part No- G448 / 449 , Bearing Cup / Cone Part No- G546 / 547 , Bearing Cup / Cone Part No- G548 / 549 , Bearing Cup / Cone Part No- G562 / 563 , Bearing Cup / Cone Part No- G533 / 534 , Bearing Cup / Cone Part No- G531 / 532 , Bearing Cup / Cone Part No- G403 / 416 , Bearing Cup / Cone Part No- G510 / G511
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
13.
Defence #10169790 Price Bid
Tender For Procurement Of Tata Spare Parts, Tata Spares Part : , Clutch Releaser Brg , Assy Clutch Release Brg With Sleev , Oil Seal , Sliding Sleeve , Tapper Roller Bearing (Rear Hub Outer) , Tapper Roller Bearing (Rear Hub Outer) , Taper Roller Bearing Outer ( 70X 125 X33.250 ) , Taper Roller Bearing , Taper Roller Brg , Synchronising Ring With Sleeve 5Th Speed , Synchronising Ring (5Th Speed Gear) , Helical Gear 2Nd Speed , Helical Gear 4Th Speed , Steering Pump , Vane Pump , Clutch Release Bearing , Clutch Release Brg , Oil Seal (To Hubs Inner) , Coller Bushing 47.2 Mm Long , Shifting Sleeve , Rear Axle Shaft , Mainshaft , Hekicalgear3rd Speed , Rear Hub Greasing Kit , Synchronsing Sleeve4th And 5Th Speed , Element Air Cleaner(Primary)Sfc 410 Fltg , G/Box Housing Cover Frt Top , Synchronising Body 4Th And 5Th , Reverse Gear On Main Shaft , Counter Shaft , Gear Rear , Element Air Cleaner(Safety) , Assy Ball Joint Rh Thd , Assy Universal Joint (For Zf P/Strg) , Head Lub Oil Filter With Adopter , Assy Clutch Master Cylinder , Thermostat , Assy Auxiliary , Water Pump Assy , Pump Water , Kit Brake Lining Set Front (Std) , Core Cooler , Brake Drum Spigotted , Assy Stub Axle Std , Assy Drag Link , Pump Lucricating Oil , Power Stg Pump 80Bar (Rane) , Assy Ball Joint Lh Thd , Assy Clutch Master Cylinder , Drag Link Kit , Repair Kit Turbocharger , Set Of Brake Linings W/O Rivets(Wheel Set)Rear Std , Assy Universal Joint , Assy Crank Shaft , Assy Oil Filter (Purolator) , Housing Fly Wheel , Oil Seal , Oil Seal Valve Stem , Seal Valve Stem , Gear Flywheel Ring , Oil Seal (C R Seals) , Gear Fly Wheel Ring , Gear Fly Wheel Ring , Gear Fly Wheel Ring , Oil Seal , Oil Seal , Kit Oil Seal , Valve Guide Seal Exhaust(Chicago Rawhide) , Oil Seal (Hand Beake Shaft) , Oil Seal , Oil Seal ( Cr Seals ) , Oil Seal (Inner )135X170x15 , Concord Brg(Bimetal)Normal 1 , Synchronising Cone , Oil Seal(Outer ) 125X150x12 , Assy Ball Joint , Sealing Ring , Assy Housing Block , Gasket Therm Hsg Cyl Hd , Oil Seal Cam Shaft Rear (Cover) , Sealing Ring , Oil Seal , Seal O Ring (Big) , Shaft Seal , Gasket Exh Manifold Pipe , Gasket , Gasket Tube To Tc , Brake Lining Std , Oil Pump Drive Shaft , Repair Kit (Minor)M/C , Fulcrurn Pin , Fuel Line (Fuel Filter To Fip) , Fuel Flexible Pipe (From Fuel Filler To Fip) , Assy Refilling Container Complete , Gasket(Turbine Inlet) Sankar , Repair Kit Major Master Cylinder Consisting Of , Retainer Oil Seal Dana , Oil Sump Gasket , Fuel Line (Feed Pump To Fuel Filter) , Drive Gear , Oil Seal , Brake Lining Std , Major Repair Kit Clutch Booster 70 Dia , Drain Cock , Slave Cylinder , Gear Fly Wheel Ring , Pully (3 Grooved) , Water Pump Repair Kit , Sealing Ring , Water Pump Kit (Minor) , Kit Repair Water Pump , Sealing Ring , Set Of Brake Linings W/O Rivets(Wheel Set)Rear Rs I , Kit Brake Lining Set Front(R/Si) , Wheel Set Brake Lining Frt R/S Ii , Dual Brake Valve , Water Pump Assy , Water Pump Kit (Major) , Tube Injector Kit (1 2 3) , Fuel Line Nls Filter To F1 , Ball Joint Assy (Lowre) , Assy Tie Rod , Oil Seal , Assy Fuel Line , Tube Injector Kit(4 5 6) , Assy Hub Front , Assy Bkt Shac , Kit Lining Set(Rear)(R/Si)M/S Bil , Set Of Brake Linings W/O Riverts (Wheel Set) Front Std , Caliper Brake Rh W/Shim , Oil Sealinstallation Tool , Dual Brake Valve , Kit Caliper(With Piston) , Assy Fuel Filter ( Lucas) , Brake Drum(Front) , Wheel Set Brake Lining Frt R/S 1 , Assy Oil Pump(Shorter Version) , Assy Oil Filter Complete(Spin On 138 Ht) , Assy Exhaust Brake Unit , Kit Rear Lining Set (Std) , Brake Shoe Lining And Roller Assy , Assy Steering Wheel Without T Emblem , Wheel Cylinder Assy 50.8 Mm , Hand Brake Valve , Tie Rod End Rh , Assy Pressure Valve Cap (14Psi) , Front Brake Overhaul Kit Minor , Clutch Slave Cylinder , Assy Pressure Valve Cap (7Psi) , Thermostst(Caltherm 120Lph) , Oilseal , Thermostate(78 Sot Gasket Cover To Thermostate Hsg) , Seal Kit (Valve Sleeve) Comprises Of , Oil Seal(Crank Shaft Front) , Rack Pad Adjuster , Pressure Line 6Th Cyl , Seal O Ring (Small) , Oil Seal , Assy Cap , Oil Seal 39X57x9 , Washersealing , Oil Seal , `O` Ring , Side Seal(M.B.Cap Rear) , Sealing Ring Rubber , Rubber Seal (Seal Holder To Joint , Gasket (For Top Cover) , Gasket ( Water Pump ) , Gasket Water Pump Nls , Rear Axcel Shaft (Through Headned) , Gasket Water Pump Nls , Shifter Fork (Reverse) , Gear Speedometer Drive , Shifting Fork (For Second And Third Gear) , Selector And Shifter Shaft , Bush King Pin , Oil Seal , Oil Seal , Assygear Shifting Lever Knob , Reverse Indicator Switch , Reverse Light Switch , Shifter Fork (1/23/4 Speed) , Drive Shaft , Counter Shaft , Synchronising Ring (5Th Speed) , Shiffer Sleeve , Synchroring 5Th Speed , Gear Front , Needle Cage Double Row , Bearing Housing , Transmission Housing Cover Front , Gear Shift Lever Assy (With Bushes) , Magnetic Drain Plug , Bearing Ball , Thrust Washer , Taper Roller Bearing 92.075X50 8X24.6 (28580/28521) , Tappet Roller Brg For Counter Shaft (40X90x25.25) , Brg Taper Roller , Four Point Ball Bearing , Angular Contact Ball Bearing [Skf][100X45x25] , Taper Roller Bearing Inner 80X140x35.25) , Taper Roller Brg ( 95X145x39) M/S Abc , Tapper Roller Bearing (Pinion) (65X145x39.75) , Tapered Roller Brg(Hyp Pinion) , King Pin Lower , Bearing Cyl Roller , Cylinderical Roller Brg , Brg Taper Roller For Differantial , Bearing Cyl Roller (For Tail Pinion) , Cylindrical Roller Thrust Bearing 100X75x 7.5 , Cylinderical Roller Brg , Four Point Ball Bearing (100X45x25) , Pulleyfan , Tapered Roller Thrust Bearing Normal (72.6X38.65X21.43) , Assy Fly Wheel , Main Shaft (Thrust Brg Arrgmt) , Taper Roller Brg Outer , Assy Flywheel , Assy Fly Wheel , Assy Helical Gear (5Th Speed) , Ring Gear , 6 Pk 1060 El Epdm Belt Samsons , Ring Gear , Seal Oil , Hose Rubber ( From Engine Outlet) , Assy Cl Rel Brg(Self Centering) Texspin , Seal Injector , Needle 2X13.8 Br 11 Is 4217 , Ball Brg (6204 2Rsr C3) , Needle Bush , Srdg Brg 20 Bc 02Xee/47X14 6204 2 Rs , Spring Pin (Rear Spring) , Oil Seal(Crank Shaft Rear) , Bearing Needle Cage , Bushing Unboard Std , Brg Assy W/O Race , Stop Light Switch , Bush , Sre Bearing , Cylindrical Roller Bearing , V Belt Nls 6Gr 1316 Mm , Taper Roller Bearing , Rpm Meter 24V 552H M/S Minda , Bearing Wheel Hub Inner , Front Spring Shackle With Bush , Assy Drag Link , Cylindericalroller Bearing , Bearing Taper Roller (133.35 X 85.725 X 30.163) , Tapper Roller Bearing Rear Hub , Taper Roller Brg (100X445x27.25) (Skf) , Assy Radiator Pipe With Hose , Hose Engine To Radiator , Assy Spring Shackle Rear , Ball Bearing , Srdg Ball Bearing 42X20x12 60042 Zr , Roller Cage (Double Row) , Roller Cage (Double Row) , Roller Cage Single Row , Poly Vee Belt (6 Groove) , Needle Bearing (Input Shft ) , Cylindrical Roller Bearing(Drive Pinion) , Roller Ring , King Pin (Upper ) , Srdg Ball Bearing (Skf 62110) , Brg Needle , Taper Roller Brg (Skf) , Spring Pin , Roller Cage (Double Row) , Poly V Belt 6 Pk 1255 L(Samsons) , Ball Bearing , Rubber Bush , D G Ball Brg(6202-2Rs 1/C3 Ht 22B) , D.G Ball Brg.( 6203-2Rs/C3htb) , Pivot Bush , Assy Drive Shaft Rh Inner , Cylindrecal Roller 4X8 , Bush , Twin Gear Counter Shaft 2/3Speed , Sewling Ring Assy , Rubber Hanger , Kit Brg Strap Bolt Dana , Assy Shackle (Rear Sprg.) , Rubber Bush , Set Piston W/O Rings Gr A , Set Of Piston Ring Std , Reston Ring Set Std , Steel Ball 11Mm Iii , Cylinder Head Gasket(Mls)Reinz Euro Iii , Engine Gasket Kit Upper , Bearing Block , Bever/Pinion Differential , Gasketcylinder Head , Rubber Support Front , Rubber Bush , Gasket Cyl Head , Assy Hose , Hose Flexible , Gear Flywheel (138 Teeth Bolt Type) , Gasketvalve , Rubber Mould (Wind Screen ) , Gear Camshaft , Gasket(Cyl Hd Cover) , Gasket Head Cover , Shifter Finger , Shifter Finger , Spider Differtial , Shaft Speedometer Drive , Assy Combi Screw (To Cover Timing Gear Housing) , Set Ofcon.Rod Bearing R/S-I Consistingof Bearing Con Rod (0.25 Mm Oversize) , Brass Pad(2Per Fork) , Cover Push Rod , Cover Push Rod , Set Of Connecting Road Brg R/S Ii , Gasket (Cover To Thermostat Housing) , Gasket Cover (Rh) , Clamp Hose , Oil Pump Gear (Driven) , Gasket Gear Cover , Bolt M8x55 Is-1364 , Repair Kit For Pistonring , Sleeve Salvage/Liner , Set Of Main Bearing 0.25 Mm Over Size(R/S-I) Consisting Of Three Items. , Gasket Inlet Manifold Cover , Hose Flexible , Gasket , Closing Ring , Shim 0.16Mm Thick , Oil Catcher , Boot , Con Rod Bearing Set Std , Link Rod (W/O Ball Joints) , Stud , Bracket(On Cyl. Block) , Tube Oil Gauge , Lever Shut Off Plate , Slinger Oil , Bearing Assy , Gasket , Packing Ring , Bearing Bush Ce , Sealing Ring , Blinker Glass Rh , Cup Moulding , Adapter Filter Head , Banjo , Assy Control Shaft With Lever , Ring Valve Seat Std-1 , Feed Pump Plunger(Blue) , Lever & Peg Assy , Oil Seal , Hose Pump , Major Kit Wheel Cyl , Suction Valve Seat , Lamp Interior , Cover Locker Wier , Slector Shaft , U Clamp (Rh) , Screw , Oring Rack Pad Adjuster , Front Spring Leaf 10Th , Impeller , Reducing Nipple , Assy Turnindicator , Gasket For Inspection Cover , Brush Assy , Hose Back Leak (270 Mm Length) , Dips Stick Liquid , U Clamp (Lh) , Rubberhose , Banjo Bolt , Piston (Plunger) , Assy Pull Road (Exhaust Manifold Side) , Piston , Adapter Oil Filter , Bal Brg (Skf) (62X25x17) , Oil Seal , Pad Spring , Assy Pipe , Amplifier Relay , Assy Hose , Injection Plug , Seal Ring , Assy Air Filter , Connector Banjo , Spring Housing , Rubber Buffer , Sealingring , Butting Ring 3.2Mm Thick , Handle(Door Inner Without Electro Plating) , Delivery Valve Holder , Spanner Adjustable A-300-Is-6149-G-2 , Assy Tube , Idling Spg , Connection Water Outlet , Capsule(Mico) , Gear For Drive Shaft , Connector , Clutch Plate Steel , Bearing Bush(Int Bracket) , Fuel Gauge , Centre Pin , Gasket (Shift Cyl) , Brake Shoe , Mtg Bkt Top , Plunger Spring , Gasket , Gaskt (Betweenupper & Lower Half) , Compression Valve Seat , O Ring Worm Cover , Screw For Inspection Cover , Screw For Inspection Cover , Ring Spanner 8X 9 , Hazard Warning Switch (Pec) , Suction Pipe (Air Filter) , Gasket , Fexing Bolt , Gasket Turbine Outlet , Set Of Gasket Kit , Seal Ring (Mico) , Gasket , Pinion Spring , Brush Spring , Shim 0.10Mm , Bearing Ball , Delivery Spring Valve , Shim 0.12Mm Thick , Woodruf Key (On Cam Shaft) , Rubber Grommet (In Brackets) (Brake House) , Setof Con Rod Bearing Std , Set & Connecting Rod Bearing Std , Ring , O Ring , Clampv Band , Hex Collar Bolt Dicor Euro Iii , Bush Bonnet Hinge , Bracket , Gasket Ring , Gasket Lub Cooler , Bracket (On Timing , Oil Tray In Rear Housing , Clamp Lower , Asy Oil Separator , Assy Wiper Arm , Gasket , Hoseflexible , Hose Flexible , Hose Flexible , Hose Flexible , Hose Plain , Hose Plain , Valve Pressure Relife , Ring Spanner 8.0 24X27 , Valve Exhaust(Euro Iii)Evl , Hoseplain , Hose Plain , Cover Lower , Kit Insert Exhaust Valve , Needle Brg , Bush Con Rod , Bush Con Rod , Cover(Rear Hub) , Gasket (Intake Mani.Cum. Head Cover Ssl) , Slider , Gasket Filter Head , Threaded Ring , Hub Bolt , Insert Valve Exhaust , Insert Valve Intake , Support Camshaft , Assy Gasket Oil Sump , Wheel Mounting Bolts , Butting Ring 6.95Mm Thick , Valve Exhaust , Valve Exhaust , Gasket Gear Housing , Valve Intake , Dipstick , Gasketvalve Cover , Gasket Valve Cover , Valve Intake , Compression Spring , Snapring2.83Mm Thick , Snapring 2.68Mm Thick , Scraper Ring , Compression Spring , Gasket (Benco Talbros) , Kit Insert Inlet Valve , Washer Sealing , Carrier , Rod Push , Valve Exhaust , Cartridge , Gasket Rr Cover Adp Hsg , Synchronising Cone , Nut M 12X1.5 Is-1364(Mig Pad To Engine Cross Member Front) , Screw Hex Head Cap , Seal Valve Steam , Seal Valve Steam , Bush Rod , Oil Seal , Ring Retaining , Spring Seat , Stud For Timing Belt Tensioner , Spring (For Accord) , Sealing Ring , Shim 0.10Mm Thick , Pressure Spring(Rev Ind Switch) , Spring , Nut Hexagon Flanmge , Collet Valve , Shim 0.5 Mm Thick , Dowel Pin M10x16 , Bolt M8x35 Is 1364 , Wood Ruf Key 8X13 Is : 2294 , Gasket Cover To Crank Case , Gasket (Exhaust Elbow To Turbo Charge) , Nut Hexflange Head Cap , Pin Cotter , Circlip A 28X2 , Plunger , Hose(Vent Tube To Radiator) , Stud , Valve Guide Inlet Std 15 S7d , Adapter Filter Head , Hose Clip , Shim 0.80 Mm Thick , Dowel Pin (12Hbx30 Is 2393)(For Connecting Clutch Housing) , Felt Washer (Sludge D/Screw) , Washer , Hose Clip 16 , Rubber Buffer Rear , Sealing Washer(Injector 4 Sp Dicor) , Hose Plain , Gasket (Cover Front On Hsg) , T Connector , Locking Plate , Valve Guide Std (Exhaust) , Lock Nut , Screw Hex Flange Head Cap , Hex Bolt For Clutch Housing , Lock (For Threaded Ring) , Gasket Front Cover , Hose Clip Screw Type , Hose Clip 21 Ts 17669 , Bushing , Screw. Hex Flange Head Cap , Washer Plain , Gasketflange , Gasket (Cooling W/Line Thermostat Housing With Flange) , Gasket Flange , Spanner De 8 X10 , Gasket(Air Intake Elbow) , Adapter , Pin , Screw Hex Flange Head Cap , Seal O Ring , Seal O Ring , Ring Retaining , Retainer Valve Spring , Bracket Lifting Engine Rear , Assy Hose (B1) , Thrust Washer (Cam Shaft To Cyl Block) , Nut M12x1.5 Is 1364 , Seal O Ring , Elbow Diff Lock Lines Tcone Below Substructur To Diff Lock , Stud Bm12x55 Is 1862 , Valve Spring(Inner) , Brace Fuel Pump , Stud Bolt(For Mtg Cyl Hd) , Plug Thrreaded , Washer Sealing , Ball End , Valve Spring , Hose Clamp Tb 54 , Hoseclamp Tb36 , Sleeve (For Cyl Block) , Hose Scoop To Tc , Sealrectangular Ring , Main Bearing Cap Bolt , Hose Tc Re Pipe To Sump , Vacuum And Pressure Cap , Valve Lock Half , Retainer Valve Spring , Screw Connecting Rod , Connecting Rod Bolt(Fully Threaded) , Clamp Hose , Hose (Scope To Tc) , Set Thrust Washer (Upper/Lower) , Nozzle Piston Cooling , Gasket , Connector Engine Vent , Seal O Ring , Hose (20X110) , Valve Guide Exhaust(Std) , Cover Access , Clamp Hose , Rubber Hose , Link Rod (224 Long ) , Seal Rectangular Ring , Rubber Hose (Overflow Line To Joint) , Clip , Thrust Spacer , Valve Seat Ring Exhaust Normal-1 , Adjusting Screw , Tube , Connector Female , Spacer Ring , Tube Fuel Supply , Assy Wheel Nut , Tube Fuel Supply , Tube Fuel Supply , Tube Oil Filter , Nuthexagon Flange , Hose Therm Bypass Pipe , Connecting Road Bearing Std 1 , Rubber Hose Moulded (Cover To Pipe) , Assy Engine Mtg Head Rear , Cylinder Liner , Rubber Hose ( Water Fill Pipe ) , Screw Banjo Connector M 10X1 X19 , Collar Screw , Dipstick , Ball Pin A 10 , Hose Rubber( Radiator Water Pump ) , Tube Oil Guage , Rubber Hose (Radiator To Engine) , Hose , Rubber Hose (Radiator To Eng) , Spacer , Rubber Hose Engine Vent , Dipstick , Sealing Ring (Mico) , Cover Valve , Hose Plain , Hose Plain , Gasket Rear Cover , Banjo Connector , Oil Seal Camshaft Front , Assy Throtle Valve , Cap Rubber Protective (On Gear Box Top) , Guard Plate 2.90Mm Thick , Valve Cover , Assy Hose , Hex Screw M6x20 Is 1364 P2 88 Ss 8451 , Hex Screw M8x25 Is 1364 P2 8.8 Ss 84 , Rubber Hose , Assy Hose , Tube Fuel Supply From Filter To Fip , Screw M16x1.5X40 , Hose Assy , Asd , Banjo Bolt , Liner (Ipl) , Hose Clamp Tb 126 , Fuse 50A Light Blue , Over Flow Valve , Centre Pin , Assy Bracket Rh(Eng Mount Rear On Frame) , Hoseelbow , Hose Plain , Assy High Pressure Hose , Breakhose 550 Mm Long , Hose (Pipe To Pipe) , Cover Intake Manifold , Assy Hose , Assy Pull Cable Engine , Engine Screw Driver 1.2 X8 X150 , Hose (Radiator Top) , Compression Ring , Rubber Hose , Hose(Radiator To Water Pump) , Rubberhose( Engine To Radiator ) , Spring Valve , Hose Flexible , Hose Flexible , Hose Flexible , Oil Seal (For Hub) , Thrust Washer Lower Std(Menon) , Repair Kit For Piston Consisting Of- Sixitem , Spanner For Wheel Nuts , Liquid Gasket , Hose Plain , Drive Square , Assy Bracket Top , Assy Timing Belt Tensioner Complete , Rubber Hose (Radiator To Thermostat , Rubber Elbow ( 12 Id X150x 150 ) , Set Of Main Bearing 0.75Mm Over Size (Rs-Iii) Consisting Of Three Items , Radiator Hose Outlet , Assy Hose , Hose Assy , Decarburising Gasket Subkit , Hose Straight , Spacer Pilot Taper Roller Bearing Of Main Shaft , Gasket Cylinder Head Std 0.15Mm Over Size , Nut For Pulley , Hose Aux Tank To Water Fill Pipe , Assy Exhaust Pipe(Manifold) , Bearing Set R/S 11 , Eng Gasket Subkit , Housing Thermostat , 4X4 Shaft Joint Assy , Engine Overhaul Gasket Kit Tc , Engine Gasket Kit Lower , Wrench For Hub Lock Nut , Gasket Exh Manifold , Connection Turbo Oil Drain , Cover Gear , Clamp Hose , Bearing Set R/Si , Major Repair Kit Consisting Of -16 Items , Rubber Hose(Radiator To Engine) , Stud , Platecylinder Block Stiffner( Bed Plate ) , Plate Cyl Block Stiffner(Bed Plate) , Pin Piston , Clamp Hose , Hose Elbow , Hose Elbow , Exhaust Valve , Assy Hose , Poly V Belt 6 Pk 1245 (Samsons) , Engine Overhaul Seal Kit Bs Iii , Set Of Con Rod Bearing R/S Iii Consisting Of , Set Of Con Rod Bearing R/S-Iii , Set Conrod Brg Normal , Spacer Fan , Assy Pump From Stg Pump To Stg G Box , U Clamp Rear Spring , Reducer Hose(Ontc) , Tube Oil Filler , Bolt Connecting Rod , Assy Hose , U Clamp , Rubber Hose , Mounting Pad Rear , Pin Timing , Poly V Belt(6 Pk 1360 El) , Poly V Belt(1360 Svl A/C Fan Samsons) , Rubber Hose Engine To Radiator Inlet , Capfiller , Manifold Fuel , Rubber Hose , Spacer Fan , Thrust Washer 2.05Mm Thick , Repair Kit Quick Release Valve , Compressionring , Braceair Compressor , Hose Clamp Tb 38 , Gasket , Flat Seal Ring (Mico) , Hose Int Cool Pipe Bottom , Hose Plain , Piston Pin , Connection Water Inlet , Valve Seat Ring Inlet Normal , Gasket , Rubber Hose , Thrust Washer 2.00 Mm Thick , Spherical Washer , Leakage Oil Line , Hose ( Radiator To Water Pump ) , Alternator (12V 55 Amp) , Assy Oil Ring Iii(G) , Pipe(Tc To Ic) , Screw Hex Head Cap M14x2.0X119 , Hose (102 1Dx120l) , Torqure Support Front , Rubber Hose (Cooling Water Line To Thermostar) , Assy Rubber Stoper (Bump) , Tube Fuel Supply , Tube Fuel Supply , 1St 3Rd 5Th 7Th 9Th And 11Th Rocker Arm Left With Bushing , 2Nd 4Th 6Th 8Th 10 & 12Th Rocker Arm Right With Bushing , 1St 3Rd 5Th 7Th 9Th 11Th Rocker Arm Left With Bushing , 2Nd 4Th 6Th 8Th 10Th 12Throcker Arm Right W/Bush , Screw M12x1.5X24 Banjo Connector , Assy P/Stg Crimp Pipe Stg G.B To Tank , Flat Collar Nut , Plunger Pressure Regulator , Bell End Amb10 Ts15624 , Gasket , Seal Rectangular Ring , Hub Bolt Front (M 20) , Plate Cover , Valve , Banjo Bolt , Thrust Washer (Idler Arm) , Intake Valve , Spring Valve , Spring Valve , Gasket , Gasket (Fip To Support) , Hose(To Assy Oil Separator , Sealing Ring Half (Set Of 2) , Bolt M12x1.5X40 , Dial Gauge Attachment , Ring Retaining , Clamping Nut , Seal Rectangular Ring , Seal Rectangular Ring , Plug Pipe , Assy Hose (To Air Pressure Gauge) , Spring (Brake Return) , Bracket Lifting Engine , Centre Bolt M12x187x11 Is 9484 , Locking Ring S10 Ts 15624 , Seal Benjo Connector 6.2 Mm , Plate Locking , Bolt M18x1.5X55 , Hose , Thrust Washer , Spring Compression , Dust Valve , Dust Valve , Center Bolt M 10 X75 X9 , Stood Bm12x40is1862 , Gasket Turbocharger , Gasket Turbo Charger , Teefemale Branch , Spacer Pump Support , Banjo Bolt , Bolt M18x1.5X65 , Hallow Screw , Housing Timing Pin , Brace Fuel Pump , Seal `O`Ring , Plug Pipe , Gasket , Tube Turbo Oil Drain , Seal O Ring , Bracealternator , Seal Rectangular Ring , Seal Rectangular Ring , Hose(Breather) , Thrust Washer Upper Std(Menon) , Retorn Spring , Main Bearing Upper Normal , Main Bearing Lower Normal , Spacer , Bolt , Sealing Washer 18X22 Is-3175 , Bush-Connecting Rod , Stud , Screw Twelve Point Cap M10x1.5X35 , Gasket(For Support) , Rubber Hose (Assy Pipe Elbow To Assy Pipe) , Rubber Hose (Thermostate Cover Yo Radiator) , Gasket , Gasket Oil Drain , Screw Twelve Point Cap , Rubber Mounting (Bottom) , Plug Expension , Screw Banjo Connector , Screw Banjo Connector M 12X1.5X24 , Hose , Hose Back Leak(35 Mm Length) , Screw Hexflange Head Cap M8x1.25X90 , Lock Retainer Valve Spring , Connecting Bushing(Unbored) , Seal Grommet , Stud Bm12x80 Is 1862 , Screw Hex Head Cap , Shim 0.40 Mm Thick , Screwhex Flange Head Cap , Pipe Union Bolt 8M12x1.5 Ts 16405 , Spring Compression , Pole Screw , Connecting Nipple Inner , Screwbanjo Connector , Gasket Timing Gear Housing , Clip Hose , Plug Expansion , Valve Spring Retainer , Lock Retainer Valve Spring , Seal O Ring , Hose Back Leak(60 Mm Length) , Assy Combi Screw , Nut , Anti Rattle Clip , Clip , Shim(2.40) , Hose Clip 17.Ts 17669 , Hose Back Leak(35 Mm Length) , Sph.Washer 8.4 Is 4297 Ss 8400 , Rubber Hose (6 Idx80 Long) , Dowel Ring M16x10 , Screw Round Head Cap M5x0.8X17 , Plug Expansion , Sealing Washer , Clamp , Dowel Sleeve (For Starter) , Wheel Bolt 45842-1 , Screw M 12X35 Is 1364 , Tappet Valve , Screw Hexflang , Seal Rectangular Ring , Screw Hex Flange Head Cap , Screw M 10X25 Is 1364 , Spacer Washer 0.2 Mm Thick , Hex Screw M8x18 Is 1364 P2 8.8 Ss 84 , Screwhex Flange Head Cap , Nut(Connecting Rod) , Rubber Bush , Seal Rectangular Ring , Dowel Ring , Screw Hexflange Head Cap , Screw , Gasket Connection , Connecting Nipple Iner , Bolt M10 X 85 Is 1364 , Screw Hexhead Cap , Washer Plain 1.65 Thick , Hose Clip 30A Is 4762 , Valve Spg Pressure And Suction Valve , Shim 0.05 Mm Thick , Bolt M6x60 Is1364 , Shim 0.20Mm Thick , Spacer Washer 0.1 Mm Thick , Key Plain Woddruff , Spring Washer B12 Is 3063(Mtg Pad To Eng Cross Member F) , Bright Washer 6.4 Is 2016 St Ss 8451 , Pin Cylindrical 8X16 Is 2393 , Spring Washer B6 Is 3063 Ss 8451 8C , Screw M6x12 Br1364 , Roller 4X12 11 Js 4217 , Shim 0.1Mm Thk , Snap Ring 2.68Mm Thk , Hose Clamp(50 Dia)(Jupitor) , Screw Connecting Rod Mj11x1.25X59 , Oil Seal , Washerplain , Isolatornoise , Gasketexhaust Main Fold , Isolator Noise , Screwflange Head Cap , Assy Pipe(Sig Pump To Power Stg Tank) , Kit Brake Lining Front Std (Per Axle ) , Assy 228 Dia Clpressure Plate , Gasket Connection , Cap , Washing Sealing (1/2) , Bushing(Oversize For No 1 Bore) , Eng Overhaul Gasket + Seal , Minor Repair Kit Consisting Of -8 Items , Valve Cone Half , Plugexpansion , Bush , Pump Water , Screw Plug , Plug Expansion , Gasket , Collet Valve , Valve Kit , Cartridge , Drain Valvewater Separator , Filter Assy , Assy Clutch Pressure Plate 310Mm Dia) , Assy Clutch Pressure Plate , Strainer Fuel , V Belt (1325 Mm) , Cl. Cover Assy.310 Dia-Luk India (Ph-Iii) , Strainerfuel , Straines Fuel , Pump Water , Assy Rubber Support Rear , Guide Valve Stem Inlet , Sealing Washer 16X20 Is - 3175 , Gasket Cap Cyl Hd Cover Tc , Valve Guide Seal , Sprocket(On Crankshaft) , Minor Repair Kit Cylinder Head , Cap Main Brg , Mandrel For Clutch Plate Alignment , Hand Priming Pump , Pipeair Inlet , Drift For Installing Spigot Bearing In Camshaft , Drift For Crank Shaft Rear Oil Seal , Major Reair Kit , Drift For Outer Race Of Taper Roller Bearing Of Drive And Main Shaft , Cover Air Compressor , Head Fuel Filter (Bottom) , Drift For Removal Of Liners , Drift For Removal Of Exhaust Valve Guides And Installation , Engine Overhaul Gasket Kit Tc Bs Iii , Set Of Bare Piston (Rs Ii ) , Piston , Eng O/H Gasket Kit , Puller For Revarse Shaft , Puller For Reverse Idler Shaft , Handle To Be Used With Drift , Drift For Oil Seal , Drift For Installation Of Oil Seal Front Cover , Bearing Set Upper And Lowerr/S 11(Binetal) , Drift For Crank Shaft Oil Seal , Valve Spring(Outer) , Support , Assy Adaptor For Fip Timing Checking(Mico) , Valve Inlet(Euro Iii)Evl , Drift For Installing And Removal Of Con Rod Bushes , Support Engine Suspension Front , Hand Priming Pump , Gasket(Push Rod Chamber Cover) , Set Thrust Washer U/L Std(Menon) , Tube Dip Stick , Drift For Installation Of Water Pump Bearing Outer Race , Vacuum Indicator , Valve Seat Ring Inlet(Cng) Normal , Gasket , Gasket (Cylinder Head Cover) , Guide Valve Stem Exhaust , Assy Timing Belt Idler , Collar Bushing 47.6 Mm Long , Release Lever Kit , Tab Washer(Mico) , Bush , Cartridge , Filter Fuel , Steering Pump(Direct Drive) , Steering Pump ( Direct Drive ) , Auto Slake Adjuster Straight , Sub Assy Clutch Housing , Assy Radiator Complete , Assy Radiator (Banco) , Assy Radiator Complete , Inter Cooler Tubular Type , Cartridge Lub Oil Filter , Assy Radiator Complete , Reservoir Viso F 27/4 , Caliper Brake Lh W/Shim , Clutch Release Yoke , Assy Steering Oil Reservoir , Filter Element Safety , Separator Fuel Water(Cartridge) , Cartridge Lub Oil Filter , Assy U.J. Steering , Manifoldexhaust , Pressure Cap , Return Spring(Brake Shoe) , Assy Centre Brg Bracket Greasable , Sleeve Wear (Rear) , Sleeve Wear(Front) , Connector Oilsection , Damper Vibration , Assy Pull Cable , Rubber Housing , Speedo Cable (Jis) 4300 Lg , Speedo Cable 3.2 Dia 4300 Mm Long , Speedo Cable 3.2 Dia 4300 Mm Long , Assy Relly Cable Eng Stop , Rubber Buffer(Upper) , Gasket(Carrier) , Rexehe Bellow , Pull Cable Accelerator , Release Lever Service Kit , Gasket Set , Assy Outer Handle Rh , Assy Outer Handle Lh , Stud,Camshaft Bearing Caps , Assy Accl Stopper , Bush (Stay Rod) , Gasket(In Between Cover To Hub) , Gasket , Gasket Cover Plate , Rubber Buffer(Radiator To Cab Bracket) , Delrin Bush , Gasket , Gasket , Prefilter Seive , Spanner Deac 9X11 , Hose(Radiator Pipe To Engine) , Gasket For Feed Pump , Gasket , Centre Bolt M12x246x11 Is 9484 , Rubber Bellow(On Release Fork) , Thin Castle Nut M 32X1.5 , Assy Engine Mount(Rear) , Assy Connecting Line , Door Handle Inner , Handle (Lh) , Assy Cap Radiator , Nut M18x1.5 (Is 1364) , Assy Wiper Arm , Head Fuel , Adaptor For Oil Pressure Transducer , Pipe (Engine To Radiator) , Assy Support Arm , Minor Repair Kit Clutch Booster 70 Dia , Bolt M12x1.5X45 Is 1364(Assy Support Towing Hook To End Cross Member) , Assy Refilling Container , Assy Sunvisor Rh , Assy Sunvisor Lh , Assy Hose , Assy Precleaner , Service Kit Minor Rear , Assy 228 Dia Clutch Cover Luk India , Element (Primary) , W/Cyl Assy 26.99 Dia M/S Bil 2966568 , Steering Spindle(Bottom) , Kit Pad (Consisting Of 4 Pads) , Steering Spindle Top , Tie Rod End Lh , Piston Rack Seal Kit , Assy Radiator , Cross Universal Joint , Kit Brake Lining Frt O/S I (Frtrear) , Brake Fluid Reservoir , O/S Hub Assy , Assy Fuel Pressure Line ( 1 & 2) , Assy 228 Dia Driven Plate (Wad) Luk India , Rear Brake Chamber/Acuator Assy , Trailer Control Valve , Minor Kit Wheel Cyl , Assy Hub Front , Kit Automatic Slack Adjuster , Cylinder Head , Assy Radiator , Spindle Wheel Bearing , Clutch Disc Repair Kit , Assy Air Filter , Assy Power Stg Gaer Box , Hand Brake Valve(Voss) , Kit Lining Set , Assy Steering Column Support , Assy Radiator Complete , Roller , Break Auide Container , Assy Oil Cooler , Clutch Disc 228 Dia , Pad Assy , Speedo Cable ( Jis) 3000 Mm , Return Spg , Gasket (Gear Box Hsg Cover Rear) , Service Kit Cam Shaft (Rear) , Assy Master Cylinder (38.1X75 Stroke) , Repair Kit For Clutch Disc , Mounting Pin ( Lower)) , Major Repair Kit For M/Cyl , Seal Kit (Trunior) Comprises Of , Repair Kit Minor Clutch M/Cyl , Gasket (Between Rr Axle & Cover) , Tube( On Rank Case) , Assy Tube , Assy Inner Handle Rh , Gasket , Assy Guide Channel Rh , Assy Guide Channel Lh , Spanner De 13 X 16 , Assy Rubber Mounting Top , Gasket (Hub) , Assy Spacer Block Complete , Assy Pull Cableaccelerator , Spacer Lh , Spring Brake Shoe Return , Mud Flap Outer Rh Wheels , Gasket , Link Rod (1004 Long ) , Pressure Spring Complete , Bush Fulerum Pin , Gasket (Coveer Gear Box Hsg Rear) , Assy Gear Shift Lever Knob (6 Speed) , Flange Gasket , First Aid Kit , Gasket , Kit (Cam Adjuster) , Rubber Cover , Security Ring , Rubber Buffer(Radiator Frame Mounting) , Reflex Reflector , Grease Nipple , Gaskrt (Front Cover Upper) , Assy Propeller Shaft Reaar (From Aux Gear Box To Per Axle) , Gear Box Housing , Gasket To Front Locking Cover , Shifting Fork (For First Gear) , U J Kit Assy , Engaging Gear (Reverse) , Gasket (In Between Over To Hub) , Gasket Push Rod Cover , Driven Shaft , Assy Winding Regulator [Rh] , Assy Winding Regulator [Lh] , Wind Shield Glass (Single Piece ) , Air Filter Element Tc , Glow Plug , Assy Cyl Head , Pump Fuel Transfer , Camshaft , Cam Shaft , Housing Gear , Seal Oil , Set Of Bare Piston R/S-I Consisting Of -Piston Pin Pistonring Retaining , Set Of Bare Piston R/S 1 , Cyl Head Gasket , Fuse 20A Yellow , Safety Cartridge , Side Indi . Lamp Lh , Side Indi . Lamp Rh , Lamp H4 12V 60/55W For Head Lamp , Lamp H4 12V 60/55W , Assy Blinkerlamp Rh , Assy Horn (100 Dia) 12V Low Tone Padmini , Starter Push Button , Assy Rear Shock Absorber , Water Temp Guage , Crank Shaft Gear , Drift For Installation Of Taper Roller Bearing , Assy Nozzle Holder , Assy Connecting Rod W/O Brg Shells , Puller For Front Wheel Hub Outer Bearing Outer Race , Fuel Pump Timing Tool (Extension) , Puller For Coupling Flange , Connecting Rod With Serreted (W/O Brg) , Puller For Helical Gear Of Oil Pump , Puller For Taper Roller Brg Drive Shaft , Drift Installation Of Taper Roller Bearing Of Main Shaft (Inner Race) , Assy Fuel Rail(Delphi) , Puller For Pilot Taper Roller Brg Main Shaft , Angle Indexing Tool , Assy Feed Pump , Fuel Lift Pump , Fuel Liftg Pump , Alternate With Pulley 90 Dia 35 Amp , Main Fold Exhaust , Asm Motor , Puller For Needle Roller Bearingsoil Seal And Spacer , Battery Cable Positive , Release Travel Setting Gauge , Assy Fuel Heater , Drift For Installation Of Liners , Assy Front Sprg , Injector Assy , 8 Ton Hydraulic Jack With Handle And Spacer Block , Fuel Feed Pump , T Map Sensor , Pivot Bush Frt Suspn , Puller , Drive Gear Fip , Pinion With Bearing [Steel] , Assy Rlease Cable Complete L H , Assy Blinker Lamp Lh , Assy Wiper Blade , Engaging Ring (Reverse Speed) , Shifter Finger , Assy Drive Shaf Lh Inner , Assy Gear 2Nd Stage , Synchronysing Sleeve (2Nd /3Rd) , Wiper Blade , Spacer Ring 7.76 Mm , Kit For Spare Bulb , Fuse 25A Natural , Wiper Motor 24V 17W(2 Speed) , Ring Pin (Std) , Locking Wire , Wind Screen Glass ( Laminated ) , Drive Shaft With Oil Seal Ring , Shifter Fork Upper , Fuse 10A Red , Assy Drive Shaft Outer , Wind Shield Glass , Assy Padding Door Lh , Assy Padding Door Rh , Assy Window Regulator Lh , Assy Window Regulator Rh , Assy Wiper Blade , Assy Coupling Flange (Assy Cover To Bracking Housing , Fuse 5A Light Brown , Shifting Fork For Reverse Gear , Door Glass Lh , Door Glass Rh , Shifting Lever , Butting Ring 7.30 Mm Thick , Rear View Mirror , Brg Wheel Hub Outer , Handle Outer Lh , Assy Rear View Mirror Outer Rh , Assy Rear View Mirror Outer (Lh) , Assy Lock Complete Rh , Assy Lock Complete Lh , Oil Pressure Gauge , Oil Pressure Gauge , Leaf 8Th(Lh) , Terminal Positive , Needle Bearing (Roller Shaft) , Leaf 7Th , Thrust Collar , Rubber Bellow ( Air Filter To Assy Pipe) , Shaft Water Pump , Bal Bearing (85X45x19)(Skf) , Sre Ball Bearing , Terminal Positive , Brush Set , Suction Valve Cap , Leaf 10Th , Nozzle , Pump Element , Air Filter Safety , Worm Adjustercover , Pivot Pin , Moulded Cover , Hoseair Intake , Insulator , Regulator And Brush Set , Rubber Hose (Due To Air Filter) , Assy Reserve Tank ( Aux Water Tank ) , De Bracket , Brake Shoe Rear With Brake Lining 10.3 Mm Thick Std , Plunger , Shifter Fork (1St/Rev) , Heat Sink Assy +Ve , Assy Control Mounting Bracket With Tube , Aux Water Tank Cover , Statar Assy , R P M Meter , Lead Assy Negative , Kit For Cooling Water Thermostat Consisting Of-Six Items , High Press Hose P/S Pump To Gb , Rpm Meter , Bearing Housing , Hose (Radiator To Water Pump ) , Cross Member Rear (Eng) , Clutch Plate Brass , Piston Rack Kit 80 Bar , Clutch Assembly , Slip Ring Assy , Assy Head Lamp (Lh) , Axle Shaft Gear , Transmission Housing , Assy Air Filter , Starter Motor(Lucas Tvs) , Assy Propeller Shaft Rear ( Aux Gear Box To Rear Axle ) , Armature Assy , Pulley , Leaf 5Th , Kit For Clutch (Diaphram) Consisting Of- Three Items , Assy Propeller Shaft Ft Complete , Armature Assy , Kit For Pressure Spring , Air Filter Primary , Assy Radiator Complete , Front Spring Assy Lh , Rotor Assy , Kit Fornozzle Holder Consisting Of -Two Items , Assy Propeller Shaft Rear Comp , Injector , Injector , Kit Connecting Rod Consisting Of - Four Items , Starter Motor 35M 127 (M/S Ltvs) , Solonid Switch , Kit For Cylinder Head & Cover Consisting Of- Thirteen Items , Spring Fixture , Wiring Harness Main , Assydistributor Pump , Assy Fip Complete , Clutch Housing (High Prdie Casting) , Assy Radiator , Fuel Injection Pump , Pump Fuel Injection (125 Hp) , Kit For Water Pump Consisting Of- Thirteen Items , Kit For Steering Gear Pump Mounting & Belt Adjustment Consisting Of-Four Items , Armature , Assy Hub With Stud & Hub Hole (W/O Brg) , Transfer Case Housing , Kit For Main Bearing Consisting Of - Eight Items , Fuel Injection Pump With Governor Feed Pump W/O Inj Timber , Rotor , Solenoid Switch , Sub Assy Clutch Housing , Ce Bracket Assy , Assy Propeller Shaft With Centre Bearing , Kit For Clutch Housing Consisting Of- Eighteen Items , Assy Propeller Shaft ( Gear Box Aux Gear Box ) , Assy Propeller Shaft ( Aux Gear Box To Front Axle ) , Glass Rh , Assy Rear Spring With Aux Spring , Assy First Leaf With Bush , Spray Fluid Refill Can , Piston Ring Expander , Cover , Speedometer (Ratio/0 80) , Brake Drum Rear , Rpm Meter 24V , Assy Head Lamp (Rh) , Drift For Outer Race Of Tapper Roller Brg , C E Shield With Bearing , Rectifier , Assy Aux Water Tank , Air Filter With Sound Deadening Pads , Fd Coil Assy , D E Bearing , Ball Bearing , Heat Sink Assy -Ve , Release Lever Rep Kit (Major) , Sre Bracket , Speedo Meter , Field Coil Auxiliary , Leaf 9Th , Pressure Control Valve , Fan , Locking Bolt , Pumpncartridge Kit Consisting Of -Six Items , Spanner For Crank Shaft , Regulator , Leaf 5Th (Rh & Lh) , Assy Hose With O Ring(Aspiration) , Element , Element , Terminal Negative , Speedometer 1.0.825 , Convoy Lamp , Air Pressure Guage , Leaf 10Th , Oil Pressure Guage , Assy Hose , Major Repair Kit , Assy Bazzle Rh , Leaf 11Th , Clutch Pressure Plate , Hub (Water Pump) , Oil Catcher (Rear Brk Drum Hub) , Assy Wiper Blade , Assy Handle With Out Lock , Wiper Blade Front (Co Driver Side) , Door Lock Front Rh , Dr Square Tmg Belt Tensr , Set Mb Shell(Upper/Lower Normal) , Go Nogo Gauge For Exhaust Valve Guides , Set Piston Rings Std , Holder For Coupling Flange , Extender Timing Pin , High Temp Buzzer Unit 12V , Wiper Arm , Assy Cable Complete , Rubber Moulding Wind Shield , Assy Suction Tube With Strainer , Belt `V` Ribbed , Fan Shroud , Air Pressure Gauge M/S Minda , Assy Hinge Top Rh (Door) , Assy Exhaust Pipe , Doorlock Front Lh , Assy Mudflap Rear , Assy Silencer With Pipe , Pipe To Ic To Engine Turbo Apriated , Engine Mounting Bracket Attachment(To Be Used With Eng Stand Pt No 2573 5890 2401) , Rubber Mould (Rear Window) , Mudguard Rh , Assy Bracket(Rh) Slave Cylinder Mounting , Glass Pane Rear Window , Assy Engine Hood Complete , Assy Propeller Shaft Rear (From Aux. Gb To Rear Axle) , Mudguard Lh , Assy Joint Cross Left , Rubber Moulding (Lh) , Assy Propeller Shaft Front (From Gear Boxto Auxgear Box) , Air Pressure Gauge , Assy Prop Shaft W/Centrebearing Front ( Length 90X1586 ) , Assy Propeller Shaft Front ( From Aux. Gbto Frt Axle) , Assy Propeller Shaft , Repair Kit For Accesories Wiper , Assy Propeller Shaft Front ( Aux Gear Box To Front Axle ) , Assy Intermediate Spindle , Assy Prop Shaft Rear Complete (Length 90X1154 ) , Assy Prop Shaft W/ Centre Bearing Middle (Length 90X808 ) , Propeller Shaft Front , Engine Bearing Tool , Glass Lh , Supporting Sleeve Right , Assy Silencer With Tail Pipe , Assy Propeller Shaft With Centre Brg , Speedometer Electronic (0 80 0 100)Minda , Assy Cable Complete , Supporting Sleeve Lh , Assy Cover Side Lh , Assy Pre Silencer , Assembly Suction Jack With 3 Pcs Handle , Assy Sealing Mould Rh (Outer) , Assy Bazzle Lh , Wipper Controller Ed , Assy Rear View Mirror Out Side , Wiper Timer 24V , Assy Sealing Mould Lh (Outer) , Cross , Electronic Speedometer , Assy Lock Lh , Assy Eng Mount Front Lh , Assy Eng Mount Front Rh , Assy Wiper Blade , Side Cover Gasket , Assy Wiper Blade , Shifter Shaft , Suction Hose Complete , Assy Lock Rh , Speed Sensor 12/24V (8 Pulse) Espeedo , Tappet Removal Tool Kit , Drift For Installing Neddle Roller Brg In Top Cover , Ball Bearing , Ball Bearing , Bush (Idler Arm) , Assy Air Filter , Seperator Fuel Water , Assy Water Pump(M/S Autolec Industries) , Cross Assy , Air Filter Element Safety , Filter Assy , Minorkit Caliper Kb X280 , Filter Wrench , Clutch Housing Lever Part , Assy Twin Pot Caliper Lh Brakes India , Housing , Assy Prop Shaft Complete (Front) , Assy Rear Brake Actuator (Scl) , Assy Radiator(Plastic Tank 560 Core) , Repair Kit (Major) Tmc B1 , Assy Wheel Cyl , Sleeve (Slack Adj End) , Repair Kit For Slane Cylinder , Repair Kit Minor Slave Cyl , Assy Fuel Filter , Oil Filter Cartridge , Clutch Master Cylinder (19.05 Dia) , Slack Adjuster , Assy Clutch Slave Cyl , Clutch Slave Cylinder , Assy Clutch Master Cylinder , Timing Belt(136 Teeth) , Fip Gear(Reduced Module) , Connecting Rod Brg Set R/S-I , Puller , Set Back Leak Hoses , Dial Indicator Assy And Sleeve , Drift For Installing Crankshaft Gear , Set Piston(4 Each) , Set Piston Rings Std , Box Spanner 27 Af , Kit For Oil Separator Consisting Of - Four Items , Inj Puller , Reamer For New Inlet Valve Guides 10 Dia , Ring Gear , Vibration Damper Lock , Set Ofbare Piston Std Consisting Ofthree Items , Set Of Bare Piston Std , Pressure Plate And Needle Roller Service Kit , Master Cylinder (Bi) , Assy Clutch Booster Dia 70 , Assy Raditor Tayatoyo , Assy Aux Water Tank , Cartridge Lub.Oil Filter , Fan Engine With Viscous , Assy Connecting Rod W/O Bearing Shells , Assy Cross Kit , Gasket Flange Exhaust Pipe , Repair Kit(Minor) Clutch Sleev Cylinder , Assy Handle (For Window Regulator) , Thermostat (78 Set) , Flasher Kit (Electronic) , Major Cliper Kbx281 , Major Kit Slave Cylinder , Assy Hp Line (Rail To Injector No 3) , Air Cylinder (Sundarm Cloxton) , Accelerator Cable , Assy Coupling Flange , Desiccant Cartridge , P Way System Protection Valve , Assy Tandem M/Cylinder , Assy Wheel Cylinder 44.45 Mm Dia , Assy Twin Pot Caliper Rh Brakes India , Master Cylinder (Bi) , Vane Pump New (Steering) , Steering Pump , Assy Spring Brake Actuator Type 16/56 , Assy Tie Rod , Universal Joint Yoke , Air Filter Assy , Brake Fluid Container , Drying And Distributor Unit , Assy Master Cylinder(Bi) , Bracket Belt , Rear Brake Overehaul Kit (Minor) , Speedo Cable 3000Mm Long Procal , Minor Rep Kit For Clutch M/Cyl Consisting Of-Seal Sealseal , Assy Air Cylinder , Wheel Brakecyl 38.1Mm Dia , Low Pr Switch , Onloader Valve Assy , Seal Kit (Steering Gear Box) Zf , Assy Clutch Master Cylinder , Repair Kit , Brake Disc , Kit Wheel Cylinder , Repair Kit (Major)M/C , Major Repair Kit For Master Cylinder , Kit Caliper W/O Piston , Assy Inner Handle Lh , Assy Hp Line (Rail To Injector No 2) , Assy Hp Line (Rail To Injector No 4) , Minor Repair Kit For M/Cyl Consisting Of , Bushing , Cylinder Block , Gasket Pushrod Cover , Crankshaft Normal With Pin , Joint Piece , Filter Insert (Stage -I) , Assy Pull Cable (Accel) , Pressure Protection Valve , Bearing Cyl Roller (For Tail Pinion) , Crown Wheel & Pinion 41/7 Ratio , Ignition Cum Steering Lock , Turbocharger , Fan(Viscous) 10 Blades , Pump Water , Fan Engine With Viscous , Sealing Washer A16x20din 7603 Cu , Assy Auxiliary Water Tank , Shift Fork 4/5 Speed , Guard Plate 3.40 Mm Thk , 4Th Gear On Counter Shaft , Reverse Idler Gear Shaft , Cold Start Pilot Kit , Assy Master Cylinder 25.4 Dia , Kit Decarb Gasket Tc , Service Indicator , Assy 310 Dia Clutch Disc , Leaf 10Th , Throwaway Filter , Fuel Gauge (Pricol) , Brush Assy , Axual Roller Brg , Tapper Roller Bearing Front Hub , Housing (Front Axle Joint Cross Left) , Spg Brake Chamber Repair Kit(Msp5/1) , Repair Kit (Msp/2/2&6/7) , Repair Kit (Msp 3/65) , Repair Kit Trailer Control Valve , Door Glass Lh , Door Glass Rh , Assy Window Regulator Lh , Assy Window Regulator Rh , Temperature Gauge M/S Minda , Air Dryer With Unloader Valve , Rep Kit Air Dryer Assy , Wiper Blade , Reverse Light Switch , Wiper Blade Front (Driver Co Driver ) , Lining Kit (Std) , 352 Dia Clutch Disc Assy (1.75Spline) , Cover Assy(1.75 Inch Spline Dia) , Element Fuel Water Seprator , Air Filter Element Primary , Gasket Kit Cyl Head(Air Compressor) , Repair Kit Piston Assy ( Air Compressor , Alternator 24 Volts 75 Amps , Alternator (12V 55 Amp ) , Shim 0.4 Mm Thick , Roller Cage Single Row , Handle Inner Rh , Gasket Kit Oil Sump , (Deleted) Alternator 12V 135 Amp , 17W Hi Power Wiper Motor , 2Nd Leaf , 3 R D Leaf Front Spring , 3.2 Dia Speedo Cable 3600L , 3Rd Leaf , Adjusting Eccentric With Hex Nut , Adjusting Fork , Air Pressure Gauge , Alternator 24 Volts 45 Amp , Assy6 Btaa 155H.P.Engine Completewit , Assy 240 Dia Cl Disc Luk Ind (F 810 Ds) , Assy 6Bt 5-9 125 Hp Engine Complete With , Assy Arm Wiper , Assy Battery Cable Negative , Assy Battery Cable Positive , Assy Blade Wipper , Assy Blinker Lamp R.H , Assy Blinker Lamp With Bulb Lh , Assy Canopy , Assy Clutch Disak 330 Dia (Double Ring) , Assy Clutch Pressure Plate 330 Dia , Assy Combination Switch , Assy Cyl Head With Valve(Mico Injector) , Assy Cylinder Head Complete , Assy Door Lock Lh , Assy Drive Shaft Left Complete , Assy Drive Shaft Right Complete , Assy G-600-6/6.58 Gear Bos Complete Rhd , Assy Fan (Emdet) , Assy Front Shock Absorber Gabriel , Assy Fuel Injection Pump (Lucas) Euro Ii , Assy Fuel Line (Fuel Feed Pump To Fuel F , Assy Fuel Water Seperator With Valve , Engine 697Na (Lowered) Engine Complete W , Assy Handle Outer (Door Lh) , Assy Head Lamp Lh (Lumax) , Assy Head Lamp With Bulb Rh (Motorised) , Assy Head Lamp With Halogen Bulb Lh , Assy Head Lamp With Halogen Bulb Rh , Assy Housing With Diaphragm Spg , Assy Joint Cross Right , Assy Lamp Warning Indicator-4 Bank 24V , Assy Lamp With Switch , Assy Link Rod , Assy Link Rod , Assy Motorised Head Lamp Complete 24V Lh , Assy Oil Filter(Spin On Type 4X4) , Assy Oil Separator , Assy Outer Handle Lh , Assy Outer Handle Rh , Assy Pick Head Bkt , Assy Pipe , Assy Radiator Block W/Filler Cap W/Vaccu , Assy Release Bearing (1.75 Dia) , Assy Release Cable Comp. (Centre Flap) , Assy Safety Belt Lh , Assy Service Indicator , Assy Side Ind.Lamp 24V-Lh , Assy Tail Lamp Lh , Assy Tail Lamp Rh , Assy Wiper Arm (Driver ) , Assy Wipper Arm And Blade Co-Driver , Battery Cut Off Switch , Bearing Needle , Beeper Alarm Unit , Blinker Glass Lh , Blinker Lh , Blinker Rh , Blinker Transmitter , Boot , Bracket (Shovel End) , Brake Actuator(Voss)24/75 , Brake Chamber Type 24 , Brake Shoe With Lining Std , Breakactuator (Voss Lh) 24/75 , Brg Drive End , Brush Box Assy , Brush Carrier Assy , Brush Carrier Assy , Brush Gear Assembly , Brush Set(4) , Bulb 12/3 21/5 W , Bulb F15 Wts 29201 , Bulb G12 V 10W Din 72601 , Bulb Rl 12V 21Din 72601 , Bush , Bush (For King Pin) , Butting Ring 3.10Mm Thik , Butting Ring 3.15Mm Thk , Butting Ring 3.20Mm Thick , Butting Ring 3.25Mm Thk , Butting Ring 3.5Mm Thick , Butting Ring 3.9Mm Thick , Butting Ring 7.00Mm Thick , Butting Ring 7.10Mm Thick , Butting Ring 7.20Mm Thick , Butting Ring 7.4 Mm Thick , Canopy (Top) , Centre Bolt M12x200 Is9484 , Centre Pin Filter Cover To Filter Hsg , Change Over Switch , Clamp , Clutch Release Bearing , Clutch Release Bearing (Self Centering ) , Combi Switch(Ms Harness) , Connecting Rod Brg Set Std-1 , Constant Mesh Gear Counter Shaft(Ratio 1 , Cover Electronic Blinker Glass Rh , Crank Shaft Normal , Crown Wheel & Pinion (41.7) , Cup , Diaphragm , Diaphragm , Diode Aux , Door Handle Outer Rh , Door Lock Lh , Door Lock Rh , Drain Hose , Drive Assy , Drive Engine Electrical Starter , Drive Shaft With Raito 1:8:98 , Dual Brake Valve , Dual Brake Valve(Voss) , Elbow Km 22X1 Sts-16558 , Elect Temp Gauge T , Eng Overhaul Seal Subkit , Assy Engine Complete W/O Starter Motor B , Engine Assy 6 Btaa 5.9 130Hp Bs Iii Engi , Engine Assy With Peripherals For Tata Su , Engine Comple With 3 Rvlineralternat , Engine Screw Driver 08 X 5.5X125 , Exhaust Flap , Fan Assy , Field Terminal , Filler Profile ( Wild Shield Glass ) , Fixing Bracket Assy , Flasher Kit , Flasher(24V) , Flasher(24V) , Follower , Front Spg Assy , Front Spring Leaf 2Nd , Fuel Flexible Pipe , Fuel Gauge , Fuel Water Seprator , Fuse Link 8 , Gasket , Gasket , Gasket , Gasket (Cover) , Gasket Between Cover & Hub , Gear Spur , Glass Regulator , Governor Plunger , Graduated Hand Brake Valve , Halogen Lamp 12V 60/55W , Halogen Lamp 24V 75/70 W , Head Lamp Bulb A 12V 45/40Wdin 72601 , Hex Head Bolt , Hexagonal Key 12 Is 3082 , Horn 12 V , Horn 24 V , Hose Assembly Nonmetalic , Housing (Front Axle Joint Cross Right , Hp Engine Complete With 3Rvliner Alter , Injection Nozzle , Joint Bushing(Top) , Joint Rubber(Bottom) , Key Woodruff Key , King Pin Upper , Kit Lining Set Std Non Asbestos , Kit Starter Motor Cinsisting Of , Knob Gear Shift Lever , L/D Screw Driver 0.4X2.5X50 , Lamp 12V 2W(Black Out Lamp Rear)Ts 29201 , Lamp 24 V-10W 24/1 , Lamp 24V 2 W , Lamp 24V 21Wd 24/1 T529201 , Lamp 24V-4W , Lamp Unit Vehicular , Leaf 6Th , Leaf 6Th (Front Spring) , Leaf 6Th (Lh) , Leaf 7Th , Leaf 8Th , Leaf 8Th , Leaf 9Th , Leaf 9Th(Lh) , Lining Std 12.2Mm Thick , Locator Negative , Lock Washer , Locking Plate , Low Oil Pressure Switch , Main Bearing Set Std 1 , Main Brg Set Std , Main Line Switch , Major Repair Kit Air Compressor , Map Reading Lamp , Master Cylinder Repair Kit , Minor Rep Kit (Tmc) , Nozzle Holder Without Injection Nozzle , Offr Drg 10 Vacuum Booster , Oil Bath Air Filter , Oil Filter , Oil Pressure Switch , Oil Seal , Oil Seal , Oil Seal(Fuel Load Stop) , Plate (Radiator Mtg)Rh , Plate Clutch ( Discclutch ) , Plunger , Power Steering Gear Assy , Pulley , Pump Fuel Injection (Rotary) , Pump Fuel Injection(Rotary) , Quick Release Valvevos W/Adaptor , Radiator Cap , Rear Sprg Assy (Lever) , Rectifier Assy , Reducer Oil Separator , Regulator , Relay , Relay 24V , Relay For Auxilliaries 12V E D , Relay Solehoid Engine Starter Electrical , Relay Starter Solenoid , Relay Valve 1 Del Port Plug , Relay Valve Frt Br Circuit , Relay With Resistor , Repair Kit Air Cylinder , Repair Kit Brake Chamber Type 24 , Repair Kit Drying And Distributtion Unit , Repair Kit Dual Brake Valve , Repair Kit Foot Control Valve , Repair Kit For Stack Adjuster , Repair Kit For Valve Pump , Repair Kit Frt Spring Brake Actuator , Repair Kit Spring Brake Actuator Type 24 , Rotor Assy , Rubber Bellow , Rubber Bellow(Dust Boot) , Rubber Bush , Rubber Hose (Air Filter End) , Rubber Hose (Engine To Radiator) , Rubber Hose Air Filter Outlet , Rubber Hose Engine To Radiator , Rubber Mould W/S Glass , Rubber Pad , Rubber Support Rear Lh , Rubber Support Rear Rh , Screen Filter Assy , Sealing Kit Zf Vane Pump , Shaft Sealing Ring , Shim 0.14Mm Thick , Shim 1.16 Mm Thk , Snap Ring 2.78Mm Thk , Snap Ring 2.88Mm Thick , Spacer Washer 3.35 Mm Thk , Spanner Double End 8X10 , Speedo Cable 3200 Mm Long , Spring Bush , Spring Pin ( To Fix Rear Spring Shackle , Starter Motor 12 Volts , Starter Motor 12V (Make Tvs Lucas Steel , Starter Motor 24 Volts , Starter Motor 24 Volts , Starter Relay 24V 50A , Starter Solenoid Switch , Stator Assy , Stator Assy , Stearing Mtdcombi Switch , Tail Light Vehicular , Tail Light Vehicular , Tapered Roller Brg(Outer) (75X130x41) , Tempe Transducer , Thrust Washer , Thrust Washer 2.30 Mm Thick , Tool Bag , Trailer Control Valve Voss , Un Loader Plunger , Valve , Valve , Valve Seat Ring Exhaust(Cng)Normal , Wheel Cyl With Citradelip 44.45 Mm Dia , Wheel Cylinder 44.45 Mm Dia (Bi) , Wheel Spanner 27X30 A/F , Wind Shield Glass Lh , Wiper Motor , Wiper Motor 17W , Woodruff Key , Assy Blinker Lamp (Lh) , Assy Handle(Winding Regulator) , Assy Blower , Master Cylinder Repair Kit(Api) Consisti , Assy Cab Lamp (With Buib-24 V) , Spring Brake Actuator W/Adoptor Type (12 , Assy Cab Complete(With Roof Hatch) , Assylamp Warning Indicator 4 Bank 24V , Rivet , Pressure Transducer , Crown Wheel And Tail Pinn (41/71Orlikon) , Stearingmtd Combi Switch , Assy Drive Shaft Right Complete , Assy Drive Shaft Left Complete , Rear Shock Absorber , Repairkit Consists Of 17 Items , Drying & Distri Unit Hi Pr Voss , Assy Side Ind.Lamp 24V-Rh , Electric Buzzer , Wiper Timer 24V , Elect.Temp Gauge 24 V (Backlit) , Blinker Lamp Rh 24V , Blinker Lamp Lh 24V , Wind Shield Glass(5.76 Thk) E Certified , Assy Clutch Disc Pressure Plate , Starter Motor 12 Volts , Rubber Hose , Head Fuel Filter , Rpm Meter 24V (Backlit 1200-2000) , Cartridge Fuze Link 10 Amp , Drive Assy , Armature Assy , Field Coil Assy , Oil Ring , Assy Steering Spindle , Temp Transducer , Assy 6Bt 5 9 125Hp Engine Complete With , Assy Gbs-40 Gear Box 8.02 1St Gear Ratio , (Deleted) Engine 697 Ina (Lowered) , Assy Rer Axle Comp Wt Dfrntl Lockr A 104 , Assy Rear Axle Compwith Differental Lo , Ball Socket Hd Comp , Cooling Water Tele Thermometer W/O Plug , Main Light Switch , Glow Plug Switch , Saloon/Out Side Mirror , Radial Seal Ring , Centre Bolt , Centre Bolt , Door Lock (Rh) W/O Locking Device , Door Lock (Lh) With Locking Device , Cover Clutch Housing Upper , Fuel Tank Cap , Castle Nut , Fuel Injection Pump W/Ksb Exptc (Mico) , Pump Fuel Injection(Rotary) , Pumpfuel Injector ( Rotary ) , Pump Fuel Injection(Rotary)Ve 6 , Bolt 083 Ts 17140 , Stud Am10x60 Is 1862 , Hex Nut M8x Is1363 , Wood Ruff Key4x6.5-Is 2294 , Worm Drive Hose Clip 100A Is 4762 , Felt Disc , Return Spring(Clutchrelease For Long T , Air Take Elbow , Clutch Master Cylinder With Bottle , Water Temprature Guage , Assy Tube (15X925) , Speedometer ( 0.84 ) , Alternator With Built In Regulator , Main Line Switch , Cylinderical Roller Brg , Assy Pto W/O Shift Lever , Gasket , Rubber Cap For Rev Ind Switch , Gear Boxhousing , Assy Gear First Speed , Cylinder Head Gasket , Assy Fly Wheel , Fuel Flexible Pipe From Feed Pump To Fue , Rubber Sleeve , Mounting Rubber Lh & Rh (For Front Suspe , Valve Seat Ring Inlet(Normal) , Assy Crank Shaft , Main Brg Set For Shaft Dia 87.75 Mm R/Si , Assy Piston Set ( For Cyl Bore 97.00 Mm , Cam Shaft With Cylinder Pin , Cam Shaft With Cyl Pin , Assy Fuel Filter With Strainer , Rubber Cuff/Hose (For Precleaner) , Piston Pin Circlip With Rings Std , Bracket For Alternator , Seal Kit , Repair Kit Hyd Brake Wheel Cyl Front , Assy Injector Euro Iii/Bs Iii , Claw(For D1 Cr Injector) , Assy Fip (Dicor) Rotary Type , Turbo Charger , Cogged V Belt 1135M Lg , Cylinder Head W/Valves , Valve Guide(Normal) , Roller Chain(Oil Pump) , Alternator With Double Groove Pulley 65 , Kit For Release Lever , Joint Rubber Upper , Joint Rubber(Lower & Upper) , Sealing Ring , Tenth Leaf , Joint Rubber , Friction Pad , Brake Shoe With Lining Std , Stop Washer , Repair Kit Dual Bake Valve , Zf Tank Assy , Steering Assy Complete , Major Seal Kit Steering Gear Box , Assy Power Steering Gear Box , Ammeter (Flat Rim) , Speedometer ( Li ) , Assy Head Lamp With Halogen Bulb Rh , Assy Hd Lamp Lh Withhalogen Bulb 24V , Tommy Bar , Heat Sink Assy(-Ve) , Starter Assy , Slip Ring End Shield , Negative Terminal , Lead Assy , Wood Ruff Key , Insul Washer , Heat Sink Assy , Brush Box Assy , Pulley , Fan Assy , Protective Cap Rubber , Assy Frt Axle Hsg W/Supporting Tube , U Clamp , U Clamp Rh , Assy Drive Shaft Right Complete , Assy Drive Shaft Left Complete) , Rear Axle Shaft , Gaiter , Assy Steering (Zf) , Exhaust Pipe Front Part , Battery Cable (Positive) , Battery Cable (Negative) , Air Pressure Gauge , Switch Key , Assy Hazard Warning Switch ( Push Pull , Assy Clip Locking (Shovel) , Clip Valve End , First Leaf With Bush , Front Spring Assy Rh , Bush , U Clamp , Centre Pin , U-Clamp , Gaiter , Spherical Washer , Bearing Slip Ring End , Assy Hub Rear , Rear Axle Shaft , Rubber Sleeve , Pr Transducer (Oil Pr-Switch) , Assy Indicator Lamp (Hand Brake) , Assy Blinker Lamp (Rh) , Low Air Pressure Switch , Puller For Front Wheel Hub , Wiper Arm , Wiper Motor 17W -Hi Power , Assy Spring Cab Mounting Rear , Rubber Buffer Upper , Brake Lining Front 13.3Mm Thick Std , Brake Lining Front , Assy Boot Rear , Accelerator Lever Assy , Relay With Resister 24V , Brake Lining Rr.Rs , Acessories Kit Wiper , Assy Housing W/Intermediate Flange , Flasher 24V , Assy Blinker Lamp L.H , Hazard Warm Switch , Assy Indicator Lamp (Low Air Pressure) , Graduated Hand Control Valve , Oil Pressure Gauge , Water Temp Gauge , Fuel Gauge 24V , Assy Blinker Lamp Lh With Bulb , Heat Sink Assy (Aux ) , Spacer Ring (Swivel Head) , Megnetic Valve , Magnetic Valve (24 V) , Rotor Final Assy , Push Pull Switch , Kit For Electrical Wind Shield Washer , Door Handle With Key Rh , Assembly Door Lock Rh , Assy Crown Wheel And Pinion(37/7) , Synchroring (1/2/3 Carbon Lining) , Fuel Gauge , Temperature Gauge With A/C Cut Off , Assy Tail Lamp , Knock Sensor 25348220 Delphi , Stator , Ecu ( Transfer Case ) , Assy 240 Dia Cl Cover Luk India , 352 Dia Clutch Dis Assy , Releasing Bearing Costing Service Kit , Assy Front Shock Absorber , Assy Rubber Bellow , Set Of Main Bearing(Std) , Assy Con. Rod , Clamp Hose , Air Compressor , Minor Repair Kit Air Compressor , Repair Kit Piston Ring , Turbo Charger , Starter Motor 12 V , Fan , Viscous Fan 22 Inch , Valve Delivery , Rod Seal-1 , Rod Seal-2 , Rod Seal-3 , Rod Seal-4 , O Ring , Sealing Washer , Wiper , Quard Ring , Sealing Washer , Sealing Washer , Gasket , Plunger Seat , Square Ring , Oil Seal , O Ring , O Ring , Sealing Washer , Sealing Washer , Ssk For Manual Valve Rotary , Gasket Pto , Gasket Pump , Shifling Shoe , Rlf Catridger , Oil Strainer , Gasket , O Ring , Copper Washer , Bonded Seal , Hose Clamp , Bonded Seal , Gasket Cyl Hd , Gasket Oil Filter Housing , Impeller , Wire For Locking (Releasing To Sleeve) , Bushing (To Rear Spring Shackle) , Rear Spring Pin , Stud Bolt , Pressure Spring , Pressure Spring , Assy Cyl Head With Valves , Cyl Head , Crown Wheel Assy , Protective Cap Rubber , Rubber Fastner , Wiper Blade , Valve Seat Ring Exh Std , Inj Timer Device Assy , Shifting Fork , Starter Motor 12V , Hose Clip Screw Type , Parking Bulb Hl 12V4w Din 72601 , Main Bearing Set Std , Delivery Hose Cavas 38 Mmx20mm With Gm C , Multy Cylinder Pump , Pump Element , Delivery Valve Assy , Governor Assy , Assy Engine Mounting Front , Passenger/Driver Fan 24V , Piston Pin , Leaf 7Th , Assy Main Line Switch , Wiring Harness Main , Assy Cable Set , Assy Main Cable Set (Front To Tail ) , Rubber Hose , Instrument Cluster(1:0. 80)M/S Minda , Ins Cluster Ms Ii L , Shim 1.24 Mm Thk , Rubber Sealing Ring , Assy Strainer Oil Pump , Assy Fan (Borg Warner) , Rep Kit L.S.E.Coil , Repair Kit Solonoid Switch Minor , Locking Ring , Diode Plate Assyve , Field Coil , Regulator Assy 12V , Armature , Rotor Assy 12V , Assy Wiper Blade(Driver) , Horn(Low Tone)24V , Assy Blinker Lamp With Bulb Rh , Assy Combi Switch (Pec) , Wiring Harness Stop Lt Swand Lp Sw , Repair Kit Graduated Hand Brake Valve , Temperature Tranducer , Assy Ball Joint Top Wish Bone , Oil Seal Hub Outer(110X129x9) , Assy Bracket Rh On Eng Mtg Rear , 352 Dia Clutch Cover Assy , Water In Fuel Ind 12V/24V , Repair Kit Relay Valve , Turbo Charger , Bearing Bushing , Lamp H4 24V 75/70W (For Motorised Head L , Assy Aux Gear Box Completewith 8 Bolt , Assy 6Bt (125 Hp) Engine Complete With 3 , Assy Gbs-40 Gear Box , Assy Gear Box Gbs-50 , Assy Engine 4Sp Dicor Bs Iii(Assy Engine , Assy Rear Axle Complete , Assy Aux Gear Box Complete , Assy Front Axle Withouthub-4.56 (Std) , Assy G-76-5/3.86 Gear Box Complete , Assy Front Axle(Live) Complete With Brak , Engine Complete With 3Rv Liner Alternato , Engine Assy 6 Bt-5.9-145 Hp Engine Compl , Engine (697 Turbo Charger) , Assy Gear Box G 600 6/8. 47 Complete , Break Bleeding Tube , Brake Bleeding Hose , Regulator , Tail Light(Lh) 4 Chamber Rectangular , Assy Filter Element (Lumax) , Rectifire Assy , Speedo Cable 3.2Mm Dia 3000Mm Long (I.I. , Rear Wind Shield Rh , Assy Water Pump , Nozzle , Key Ring , Switch Key Ring , Laminated Passenger Door Glass , Assy Water Tank 55 Ltrs , Lock Nut , Release Bearing Assy , Cylinder Head Gasket( 1.7Mm Thick) , Priming Pump Hand , Repair Kit (Msp 3/62) Hand Control Valve , Clutch Sleeve With Brg , Filter Element , Regulator Handle , Front Spring Leaf 8Th , Assy First Leaf With Bush , Third Leaf , Sealing Ring , Wheel Cylinder Repair Kit (Bi) , Friction Washer , Universal Joint , Gear Ring , Clutch Release Sleeve With Bearing , Rear Axle Shaft Gear , Yoke Universal Joint , Transfer Label , Fuel Filter , Terminal Negative , Distributor Head , Joint Bushing , Speaker (Ahuja Make ) , Music System Cassette Player(Ahuja Make) , Flag Red Post Dia 20Mm Welded On Both Si , Pole Screw , Oil Seal , Cover Electronic Blinker Glass Lh , Gasket , Blinker Lamp Lh , Bulb 21 W Ts-29201 , Horn Electrical , Injector , Seal Kit(Valve Sleeve) , Transmission Mechanical Vehicular/Assy G , C.E. Bracket Assy , Axle Assy Automotive Driving , Sealing Gasket 0.50Mm Thk , Clutch Release Bearing , Alternator Assy With Double Gnved Pully , Oil Seal , Lamp 24 V 2W , Solenoid , Spacer Ring Swivel Head , Sump Packing , Spanner Deac 08X10 , Radiator Engine Coolant , Shaft Straight , Shaft Straight , Screw Banjo Connector , Ball Pivot , Steering Lever Left , Steering Lever Right , Stud Bolt (For Mtg Cyl Hd) , Hex Nut , V Belt (Cogged 980 Ig) , Bushing , Prefilter Sleve (Mfr Part No. 1450-410-0 , Assembly Door Lock Rh , Solenoid Switch , Field Coil Assy , Starter Motor(Rf 78M45) , C E Bush , Hose Plain , Air Compressor (Top Port) , Flasher(24 V) , Assy Comb Switch , Cover Filter , Assy Head Lamp With Bulb 24 V Offer , Rubber Hose (T Connector To Radiator) , Field Coil Assy , Bearing Bush Ce , Pole Screw , Thrust Collar , Terminal , Assy Canvas Cover , Air Filter Element Primary , Solenoid Switch , Brush Set (Insul Brush) , Solenoid Switch , Brush Gear Assy , Stainless Steel Bolt M6x20 Long With Nyl , Push Tap , Gasket , Stainless Steel Brush 5Cm Widthx20cm Wit , Bearing Bush Inter Bkt , Filter Fuel , Suction Hose Cavas 38Mmx30m With Gm Coup , Driven Disc&Cover Assy , Gasket Rear Axle Housing Cover , Fuse 8Din 72581 , Repair Kit Hyd Brake Wheel Cylinder , Cartridge Lub Oil Filter , Brake Drum Rear , Armature Assy , Drive Assy , Relay With 6 Pin , Fan , Rep Kit(For Wheel Cyl) , Brake Shoe Rear With Brake Lining , Locking Washer , Nut Wheel M20x2.5 , Piston Cup , Bushing Sleeve , Assy Rectangular Head Lamp Rh , Bulb D 12/3-21/6 Ts 29 201 , Assy Tail Light Four Chamber Lh , Assy Rear View Mirror (Outside) Rh (Luma , Assy Rear View Mirror (Outside) Lh (Luma , Wiper Motor , Stop Light Switch (Pec) , Regulator And Brush Box Assy , Brg Bush , Ignition Key , Tool Bag , Inspection Lamp With 10 Mtr Long Cable E , Speedometer , Solenoid Operated Valve , Sealing Kit , Cab Lifting Bar , Assy Pipe (To Air Gauge 2) , Grab Handle Lh , Assy Pipe , Grease Gun , Timing Device Piston , C E Bearing , Pushing Electromagnet , Solenoid , First Aid Kit , Electronic Flasher Kit , Electric Buzzer , Triangle Kit Bag/Small , Banjo Bolt A8n 15011 , Pressure Line Cyl No. 5 , Pressure Line 4Th Cyl , Spring Assy Leaf , Pressure Line 2Nd Cyl , Pressure Plate Assy , Oil Seal , Slave Cyl Clutch , Governor Shaft , Needle , Cylindrical Roller Brg , Repair Kit Water Pump Major , Insp Lamp With 10M Cable Comp W/Single , Three Way Fuel Lock , Gasket Cyl Head , Main Leaf With Bush , Cylinder Roller Bearing , Filter Fuel , Filter Fuel , Assy Tail Lamp Lh , Assy Tail Lamp Rh , Assy Spare Wheel Lifting Unit , Thermostate , Solenoid Switch , Fluid Container (Clutch) , Assy. Nozzle , Seal Sealing Ring , Assy 6Bt Aa-5.9-155 Hp Engine Complete , Sppaner Deac 13X17 , Wiper Motor24v
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 1
Multi State View Result →
14.
Housing Urban and Rular Development #10080121 Price Bid
Supply And Installation Of Integrated Gandd And Flood Ews Pdhep Supply And Installation Of Integrated Gandd ( Automatic Velocity Meter ) And Flood Ews ( Early Warning System ) At Two Sites For Pakal Dul He Project, Cvpppl, Kishtwar, Jandk , Integrated Automatic Water Level Recorder ( Non-Contact Radar / Rf Type ) For Flood Early Warning Including , Integrated Automatic Precipitation Gauge For Flood Early Warning , Integrated Automatic Velocity Meter For Discharge Measurement & Flood Early Warning , Common Data Logger For Automatic Water Level Recorder ( Non- Contact Radar Type ) Automatic Precipitation Gauge And Automatic Velocity Meter , Complete Computer System For Control Room With Online Remote Monitoring Software Including Sensor Dashboard , Integrated Hooters With Rechargeable Battery Backup , Integrated Warning Lights ( Amber, Green And Red ) Rechargeable Battery Backup , Batteries With Solar Panel And Charge Controller With Enclosures For Two Location Of Flood Early Warning System , Complete Installation And Commissioning Of Integrated G&D ( Automatic Velocity Meter ) And Flood Ews At Two Sites Of Pakal Dul He Project Including Supply Of Accessories & Enclosures Required For Complete Installation And Commissioning
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Private Organizations No of Bidders 4
Jammu And Kashmir View Result →
15.
New and Renewable Energy #10053821 Price Bid
Rate Contract For Spares For Eimco Elecon Make Equipment Rate Contract For Spares For Eimco Elecon Make Equipment , Rate Contract For Spares For Eimco Elecon Make Equipment , Arm Assembly Part No917a070000001 Model 907 , Bush,Metric Part Nombh100/116/70A Model 907 , Bush (Metric) Part Nombh100/116/50A Model 907 , Pin Part No917a060000007 Model 907 , Lock Plate Part No917a060000001 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Grease Nipple Part Nobp1fg Model 907 , Pin Part No917a060000014 Model 907 , Lock Plate Part No917a060000005 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Bush Part Nombh125_135_101 Model 907 , Lever Assembly Part No917a070000002 Model 907 , Bush (Metric) Part Nombh125/145/85A Model 907 , Bush (Metric) Part Nombh90/106/100A Model 907 , Pin Part No917a060000008 Model 907 , Lock Plate Part No917a060000002 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Grease Nipple Part Nobp1fg Model 907 , Bush Part Nombh90_98_60 Model 907 , Link Assembly Part No917a070000006 Model 907 , Pin Part No917a060000009 Model 907 , Lock Plate Part No907a060000006 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Grease Nipple Part Nobp1fg Model 907 , Bush(Metric) Part Nombh90/106/60A Model 907 , Push Plate Bucket Assy. Part No907b070000063 Model 907 , Bucket Lip Part Noeea0032174 Model 907 , Twisting Bumper Part No19wl429091510 Model 907 , Spacer Part No19wl425091303 Model 907 , Washer Part No19wl425091304 Model 907 , Hex Head Screw Part Nomt12lg40g Model 907 , Plate Part Noeea0005530 Model 907 , Locking Ring Part Noeea0002017 Model 907 , Lock Ring Part Nossla020000023 Model 907 , Push Plate Upper Mac. Part No907b020000089 Model 907 , Push Plate Lower Part No907b020000090 Model 907 , Pin, Push Plate Lower Part No907a060000008 Model 907 , Pin, Push Plate Upper Part No907a060000009 Model 907 , Hex Head Bolt Part Nomt10lg65g Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut, Nyloc Part Nomt10ln Model 907 , Push Plate Cylinder Part No907b050000080 Model 907 , Tube S/A-2 Part Noeea0032090 Model 907 , Piston Rod S/A Part Noeea0032091 Model 907 , Head End Cover Part Noeea0032092 Model 907 , Piston Part Noeea0028785 Model 907 , Retainer Part Noeea0028786 Model 907 , Snap Ring Part Noeea0028787 Model 907 , Grub Screw, Piston Part Noeea0024567 Model 907 , Gub Screw Part Noeea0023564 Model 907 , Circlip Part Noeea0022817 Model 907 , Spherical Bearing Part Nostdc003/036 Model 907 , Grease Nipple With Cap Part Noeea0020796 Model 907 , Bush Part Noeea0023556 Model 907 , Piston Seal Ring (*) Part Noeea0023563 Model 907 , Piston Wiper Ring (*) Part Noeea0023562 Model 907 , Piston Rod O-Ring (*) Part Noeea0023561 Model 907 , Back Up Ring (*) Part Noeea0023560 Model 907 , O-Ring (*) Part Noeea0023555 Model 907 , O-Ring (*) Part Noeea0023554 Model 907 , Step Seal (*) Part Noeea0023558 Model 907 , Rod Seal (*) Part Noeea0023559 Model 907 , Wiper Seal (*) Part Noeea0023747 Model 907 , Seal Kit (* Items ) Part Noeea0032093 Model 907 , Pin (Bucket) Part No907a060000004 Model 907 , Pin, Upper Push Plate Part No907a060000007 Model 907 , Pin Part No917a060000010 Model 907 , Bush (Metric) Part Nombh100/116/55A Model 907 , Bush (Metric) Part Nombh90/106/100A Model 907 , Spacer Part No811a060000106 Model 907 , Lock Plate Part No907a060000010 Model 907 , Grease Nipple Part Nobp1fg Model 907 , Hex Socket Head Cap Screw Part No370-2309 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Hex Head Bolt Part No370-0326 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut, Nyloc Part Nomt10ln Model 907 , Front Frame Assembly Part No917a070000003 Model 907 , Locking Ring Part Noeea0003926 Model 907 , Pin Assy. Part No917a020000001 Model 907 , Pin Part No917a060000017 Model 907 , Chain Part No103451 Model 907 , Hex Socket Head Cap Screw Part No370-2409 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Pin Part No917a060000015 Model 907 , Hex Socket Head Cap Screw Part No370-2329 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut Part No369-0110 Model 907 , Pin Part No917a060000012 Model 907 , Lock Plate Part No907a060000011 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Grease Nipple Part Nobp1fg Model 907 , Pin Part No917a060000013 Model 907 , Lock Plate Part No917a060000002 Model 907 , Lock Plate Part No917a060000004 Model 907 , Pin Part No917a060000011 Model 907 , Spherical Bearing Part Nostdc003/056 Model 907 , Seal Part Noseg251 Model 907 , O Ring Part Noseg1099 Model 907 , Hex Socket Head Cap Screw Part No370-2232B Model 907 , Wear Washer Part No912b060000117 Model 907 , Plate Part Noeea0024855 Model 907 , Bush (Metric) Part Nombh70/82/100A Model 907 , Bush Part Nombh100_110_64 Model 907 , Bush Part Nombh100_110_68 Model 907 , Bush Part Nombh90_100_78 Model 907 , Bush Part Nombh90_100_82 Model 907 , Wheel Arch Lh Part No917a020000010 Model 907 , Wheel Arch Rh Part No917a020000011 Model 907 , Guard Part No917a020000012 Model 907 , Clamp Part No917a020000009 Model 907 , Front Axle Part No917b050000011 Model 907 , Axle Housing Part Noeea0025425 Model 907 , Breather Part Noeea0025426 Model 907 , Screw Plug Part Noeea0025427 Model 907 , Sealing Ring Part Noeea0025428 Model 907 , Screw Plug Part Noeea0025429 Model 907 , Sealing Ring Part Noeea0025430 Model 907 , Axle Shaft Part Noeea0025431 Model 907 , Wheel Stud Part Noeea0025434 Model 907 , Ring Part Noeea0025435 Model 907 , Radial Seal Ring Part Noeea0025436 Model 907 , Radial Seal Ring Part Noeea0025437 Model 907 , Tapered Roller Bearing Part Noeea0025438 Model 907 , Tapered Roller Bearing Part Noeea0025439 Model 907 , Ring Part Noeea0025440 Model 907 , Nut Part Noeea0025441 Model 907 , Hexagon Socket Screw Part Noeea0025442 Model 907 , O-Ring Part Noeea0025443 Model 907 , Sealing Ring Part Noeea0025444 Model 907 , Inner Disk Part Noeea0025445 Model 907 , Outer Disk Part Noeea0025446 Model 907 , Brake Group Kit Part No907a070000085 Model 907 , Piston Part Noeea0025447 Model 907 , Gasket Part Noeea0025448 Model 907 , Gasket Part Noeea0025449 Model 907 , Brake Carrier Part Noeea0025450 Model 907 , Brake Housing Part Noeea0025451 Model 907 , O-Ring Part Noeea0025452 Model 907 , O-Ring Part Noeea0025453 Model 907 , O-Ring Part Noeea0025454 Model 907 , Hexagon Socket Screw Part Noeea0025455 Model 907 , Hexagon Socket Screw Part Noeea0025456 Model 907 , Face Seal Part Noeea0025457 Model 907 , Screw Plug Part Noeea0025458 Model 907 , Sealing Ring Part Noeea0025459 Model 907 , Bleeding Socket Part Noeea0025460 Model 907 , Sealing Ring Part Noeea0025461 Model 907 , Bleeder Valve Part Noeea0025462 Model 907 , Compression Spring Part Noeea0025463 Model 907 , Compression Spring Part Noeea0025464 Model 907 , Intermediate Piece Part Noeea0025465 Model 907 , Piston Guide Ring Part Noeea0025466 Model 907 , Warning Label Part Noeea0025467 Model 907 , O-Ring Part Noeea0025468 Model 907 , Thread Bushing Part Noeea0025469 Model 907 , O-Ring Part Noeea0025472 Model 907 , Cap Part Noeea0025473 Model 907 , Planetary Housing Part Noeea0025474 Model 907 , O-Ring Part Noeea0025475 Model 907 , Screw Plug Part Noeea0025476 Model 907 , Disk Part Noeea0025480 Model 907 , Hexagon Socket Screw Part Noeea0025481 Model 907 , Sun Gear Part Noeea0025482 Model 907 , Bushing Part Noeea0025483 Model 907 , Hexagon Socket Screw Part Noeea0025484 Model 907 , Ring Part Noeea0025485 Model 907 , Planetary Gear Part Noeea0025486 Model 907 , Disk Part Noeea0025487 Model 907 , Ring Part Noeea0025488 Model 907 , Needle Bearing Part Noeea0025489 Model 907 , Planetary Pin Part Noeea0025490 Model 907 , Locking Pin Part Noeea0025491 Model 907 , Ring Gear Part Noeea0025492 Model 907 , Ring Gear Carrier Part Noeea0025493 Model 907 , Retainer Part Noeea0025494 Model 907 , Hexagon Screw Part Noeea0025495 Model 907 , O-Ring Part Noeea0025496 Model 907 , Differential And Carrier Assembly Part Noeea0025497 Model 907 , Drive Pinion Part Noeea0025498 Model 907 , Ring Gear Part Noeea0025499 Model 907 , Differential Housing Part Noeea0025500 Model 907 , Differential Spider Part Noeea0025502 Model 907 , Differential Side Gear Part Noeea0025503 Model 907 , Differential Pinion Part Noeea0025504 Model 907 , Bushing Part Noeea0025505 Model 907 , Hexagon Screw Part Noeea0025507 Model 907 , Tapered Roller Bearing Part Noeea0025508 Model 907 , Tapered Roller Bearing Part Noeea0025509 Model 907 , Differential Carrier Part Noeea0025510 Model 907 , Hexagon Screw Part Noeea0025511 Model 907 , Setting Ring Part Noeea0025512 Model 907 , Lock Plate Part Noeea0025513 Model 907 , Hexagon Screw Part Noeea0025515 Model 907 , Hexagon Screw Part Noeea0025516 Model 907 , Bolt Part Noeea0025517 Model 907 , Bolt Part Noeea0025518 Model 907 , Hexagon Nut Part Noeea0025519 Model 907 , Tapered Roller Bearing Part Noeea0025520 Model 907 , Bushing Part Noeea0025521 Model 907 , Tapered Roller Bearing Part Noeea0025522 Model 907 , Bearing Flange Part Noeea0025523 Model 907 , Cover Part Noeea0025524 Model 907 , Radial Seal Ring Part Noeea0025525 Model 907 , Hexagon Screw Part Noeea0025526 Model 907 , Compensation Plate Part Noeea0025527 Model 907 , Drive Flange Part Noeea0025528 Model 907 , Adjusting Nut Part Noeea0025529 Model 907 , Bearing Part Noeea0025530 Model 907 , Circlip Part Noeea0025531 Model 907 , Circlip Part Noeea0025532 Model 907 , Outer Disk Part Noeea0025534 Model 907 , Inner Disk Part Noeea0025535 Model 907 , Disk Part Noeea0025536 Model 907 , Disk Part Noeea0025537 Model 907 , O-Ring Part Noeea0025538 Model 907 , Disk Part Noeea0025539 Model 907 , Disk Part Noeea0025540 Model 907 , Ring Part Noeea0025541 Model 907 , Axle Bolt Part No917a060000019 Model 907 , Clamp Plate Part No917a020000008 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut Part No369-0110 Model 907 , Lock Wire (As Required) Part Nol400 Model 907 , Spring Washer Part Nomdw24sa Model 907 , Spacer Part Noeea0025806 Model 907 , Spacer Part Noeea0032217 Model 907 , Spacer Part Noeea0027058 Model 907 , Spacer Part Noeea0027059 Model 907 , Roll Back Cylinder Part No917b050000093 Model 907 , Tube S/A Part Noeea0027156 Model 907 , Piston Rod S/A Part Noeea0027157 Model 907 , Head End Cover Part Noeea0027158 Model 907 , Piston Part Noeea0027159 Model 907 , Circlip Part Noeea0025685 Model 907 , Sph. Bearing Part Noeea0025686 Model 907 , Grease Nipple With Cap Part Noeea0025669 Model 907 , Grub Screw Part Noeea0025670 Model 907 , Rod Wear Ring(*) Part Noeea0025688 Model 907 , Piston Seal-Glydring(*) Part Noeea0025689 Model 907 , Piston Rod O Ring(*) Part Noeea0025690 Model 907 , Piston Rod Backup Ring(*) Part Noeea0025691 Model 907 , Hec O Ring(*) Part Noeea0025692 Model 907 , Hec Backup Ring(*) Part Noeea0025693 Model 907 , Piston Wear Ring(*) Part Noeea0025694 Model 907 , Rod Seal-Bs Type(*) Part Noeea0025677 Model 907 , Rod Wiper-H860(*) Part Noeea0025695 Model 907 , Stop Tube O Ring(*) Part Noeea0025696 Model 907 , Step Seal (*) Part Noeea0025676 Model 907 , Steel Ball(*) Part Noeea0025679 Model 907 , Counter Balance Valve Part Noeea0027160 Model 907 , Grub Csrew Part Noeea0029180 Model 907 , Seal Kit (*) Marked Items Part Noeea0027161 Model 907 , Lift Cylinder Part No917b050000094 Model 907 , Tube S/A Part Noeea0027162 Model 907 , Piston Rod S/A Part Noeea0027163 Model 907 , Head End Cover Part Noeea0027164 Model 907 , Piston Part Noeea0027165 Model 907 , Circlip Part Noeea0025667 Model 907 , Sph Bearing Part Noeea0025668 Model 907 , Grease Nipple With Cap Part Noeea0025669 Model 907 , Grub Screw Part Noeea0025670 Model 907 , Piston Wear Ring (*) Part Noeea0025672 Model 907 , Piston Seal, Glydring (*) Part Noeea0025673 Model 907 , O-Ring, Piston Rod (*) Part Noeea0022809 Model 907 , Piston Rod Back Up Ring (*) Part Noeea0022810 Model 907 , Hec O Ring(*) Part Noeea0025674 Model 907 , Hec Backup Ring(*) Part Noeea0025675 Model 907 , Step Seal (*) Part Noeea0025676 Model 907 , Rod Seal-Bs Type(*) Part Noeea0025677 Model 907 , Rod Wiper-860(*) Part Noeea0025678 Model 907 , Steel Ball(*) Part Noeea0025679 Model 907 , Counter Balance Valve Part Noeea0027167 Model 907 , Seal Kit (*) Marked Items Part Noeea0027168 Model 907 , Rear Frame Part No907c020000099 Model 907 , Plate, Switch Mtg Part Noeea0002375 Model 907 , Coupling Part Nostdd017/015 Model 907 , Coupling (1Bsp) Part Nostdd017/16 Model 907 , Clamp, Half Part No912b060000098 Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Plate Part Noeea0031318 Model 907 , Hex Nut Part No369-0116 Model 907 , Bracket Part No907a070000082 Model 907 , Plate Part Noeea0033367 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Threaded Boss Part Noeea0033366 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Fuel Level Gauge Part No912b050000314 Model 907 , Plug Part No1027a050000003 Model 907 , Rear Axle Part No917b050000012 Model 907 , Axle Housing Part Noeea0025425 Model 907 , Breather Part Noeea0025426 Model 907 , Screw Plug Part Noeea0025427 Model 907 , Planetary Group Kit Part No907a070000086 Model 907 , Sealing Ring Part Noeea0025428 Model 907 , Screw Plug Part Noeea0025429 Model 907 , Sealing Ring Part Noeea0025430 Model 907 , Axle Shaft Part Noeea0025431 Model 907 , Axle Shaft Part Noeea0025432 Model 907 , Wheel Stud Part Noeea0025434 Model 907 , Hub Reduction Group Kit Part No907a070000087 Model 907 , Ring Part Noeea0025435 Model 907 , Radial Seal Ring Part Noeea0025436 Model 907 , Radial Seal Ring Part Noeea0025437 Model 907 , Tapered Roller Bearing Part Noeea0025438 Model 907 , Tapered Roller Bearing Part Noeea0025439 Model 907 , Ring Part Noeea0025440 Model 907 , Nut Part Noeea0025441 Model 907 , Hexagon Socket Screw Part Noeea0025442 Model 907 , O-Ring Part Noeea0025443 Model 907 , Sealing Ring Part Noeea0025444 Model 907 , Inner Disk Part Noeea0025445 Model 907 , Outer Disk Part Noeea0025446 Model 907 , Piston Part Noeea0025447 Model 907 , Gasket Part Noeea0025448 Model 907 , Gasket Part Noeea0025449 Model 907 , Brake Carrier Part Noeea0025450 Model 907 , Brake Housing Part Noeea0025451 Model 907 , O-Ring Part Noeea0025452 Model 907 , O-Ring Part Noeea0025453 Model 907 , O-Ring Part Noeea0025454 Model 907 , Hexagon Socket Screw Part Noeea0025455 Model 907 , Hexagon Socket Screw Part Noeea0025456 Model 907 , Face Seal Part Noeea0025457 Model 907 , Screw Plug Part Noeea0025458 Model 907 , Sealing Ring Part Noeea0025459 Model 907 , Bleeding Socket Part Noeea0025460 Model 907 , Sealing Ring Part Noeea0025461 Model 907 , Bleeder Valve Part Noeea0025462 Model 907 , Compression Spring Part Noeea0025463 Model 907 , Compression Spring Part Noeea0025464 Model 907 , Intermediate Piece Part Noeea0025465 Model 907 , Piston Guide Ring Part Noeea0025466 Model 907 , Warning Label Part Noeea0025467 Model 907 , O-Ring Part Noeea0025468 Model 907 , Thread Bushing Part Noeea0025469 Model 907 , O-Ring Part Noeea0025472 Model 907 , Cap Part Noeea0025473 Model 907 , Planetary Housing Part Noeea0025474 Model 907 , O-Ring Part Noeea0025475 Model 907 , Screw Plug Part Noeea0025476 Model 907 , Disk Part Noeea0025480 Model 907 , Hexagon Socket Screw Part Noeea0025481 Model 907 , Sun Gear Part Noeea0025482 Model 907 , Bushing Part Noeea0025483 Model 907 , Hexagon Socket Screw Part Noeea0025484 Model 907 , Ring Part Noeea0025485 Model 907 , Planetary Gear Part Noeea0025486 Model 907 , Disk Part Noeea0025487 Model 907 , Ring Part Noeea0025488 Model 907 , Needle Bearing Part Noeea0025489 Model 907 , Planetary Pin Part Noeea0025490 Model 907 , Locking Pin Part Noeea0025491 Model 907 , Ring Gear Part Noeea0025492 Model 907 , Ring Gear Carrier Part Noeea0025493 Model 907 , Retainer Part Noeea0025494 Model 907 , Hexagon Screw Part Noeea0025495 Model 907 , O-Ring Part Noeea0025496 Model 907 , Differential And Carrier Assembly Part Noeea0025470 Model 907 , Drive Pinion Part Noeea0025498 Model 907 , Ring Gear Part Noeea0025499 Model 907 , Differential Housing Part Noeea0025500 Model 907 , Differential Housing Part Noeea0025501 Model 907 , Hexagon Screw Part Noeea0025507 Model 907 , Tapered Roller Bearing Part Noeea0025508 Model 907 , Differential Carrier Part Noeea0025510 Model 907 , Hexagon Screw Part Noeea0025511 Model 907 , Setting Ring Part Noeea0025512 Model 907 , Lock Plate Part Noeea0025513 Model 907 , Hexagon Screw Part Noeea0025515 Model 907 , Hexagon Screw Part Noeea0025516 Model 907 , Bolt Part Noeea0025517 Model 907 , Bolt Part Noeea0025518 Model 907 , Hexagon Nut Part Noeea0025519 Model 907 , Tapered Roller Bearing Part Noeea0025520 Model 907 , Bushing Part Noeea0025521 Model 907 , Tapered Roller Bearing Part Noeea0025522 Model 907 , Bearing Flange Part Noeea0025523 Model 907 , Cover Part Noeea0025524 Model 907 , Radial Seal Ring Part Noeea0025525 Model 907 , Hexagon Screw Part Noeea0025526 Model 907 , Compensation Plate Part Noeea0025527 Model 907 , Drive Flange Part Noeea0025528 Model 907 , Adjusting Nut Part Noeea0025529 Model 907 , Bearing Part Noeea0025530 Model 907 , Circlip Part Noeea0025531 Model 907 , Circlip Part Noeea0025532 Model 907 , Nospin Differential Part Noeea0025533 Model 907 , O-Ring Part Noeea0025538 Model 907 , Disk Part Noeea0025539 Model 907 , Disk Part Noeea0025540 Model 907 , Credle Kit For Axle Part No907a070000084 Model 907 , Plate Part Noeea0025542 Model 907 , Ring Part Noeea0025543 Model 907 , Disk Part Noeea0025544 Model 907 , Disk Part Noeea0025545 Model 907 , Bushing Part Noeea0025546 Model 907 , Bracket Part Noeea0025547 Model 907 , Disk Part Noeea0025548 Model 907 , Plate Part Noeea0025549 Model 907 , Plate Part Noeea0025550 Model 907 , Plate Part Noeea0025551 Model 907 , Hexagon Screw Part Noeea0025552 Model 907 , Hexagon Screw Part Noeea0025553 Model 907 , Hexagon Screw Part Noeea0025554 Model 907 , O-Ring Part Noeea0025555 Model 907 , Grease Nipple Part Noeea0025556 Model 907 , Locking Pin Part Noeea0025557 Model 907 , Sunk Screw Part Noeea0025558 Model 907 , Hex Head Bolt Part No917a060000023 Model 907 , Spring Washer Part Nomdw20sa Model 907 , Dowelpin Part Nomkb30m40 Model 907 , Hex Head Bolt Part No917a060000024 Model 907 , Steering Cylinder Part No917b050000008 Model 907 , Tube S/A Part Noeea0025637 Model 907 , Piston Rod S/A Part Noeea0025638 Model 907 , Head End Cover Part Noeea0022798 Model 907 , Piston Part Noeea0025639 Model 907 , Circlip Part Noeea0022800 Model 907 , Spherical Bearing Part Noeea0022799 Model 907 , Grease Nipple With Cap Part Noeea0020796 Model 907 , Grub Screw Part Noeea0022801 Model 907 , Snap Ring Part Noeea0025634 Model 907 , Piston Wear Ring (*) Part Noeea0022803 Model 907 , Piston Seal (*) Part Noeea0022802 Model 907 , Piston Rod O Ring (*) Part Noeea0022804 Model 907 , Back Up Ring (*) Part Noeea0022805 Model 907 , O-Ring, Piston Rod (*) Part Noeea0022809 Model 907 , Hec B/U Ring(*) Part Noeea0025698 Model 907 , Rod Wear Ring (*) Part Noeea0022808 Model 907 , Rod Seal (*) Part Noeea0022807 Model 907 , Wiper(*) Part Noeea0025635 Model 907 , Seal Kit (*) Marked Items Part Noeea0025645 Model 907 , Spacer Part No907a020000046 Model 907 , Pin Part No917a060000016 Model 907 , Lock Plate Part No822a060000013 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Pin Assy. Part No917a020000002 Model 907 , Pin Part No917a060000018 Model 907 , R. Bar Part Noeea0012035 Model 907 , Pin (F.F.-R.F.) Part No907b060000005 Model 907 , Clamp Half Part No912b060000115 Model 907 , Hex Head Bolt Part No370-0631 Model 907 , Hex Nut Part No369-0116 Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Head Bolt Part No370-0236 Model 907 , Spring Washer Part Nomdw08sa Model 907 , Cover Part No811b020000150 Model 907 , Gasket Part No811b050000067 Model 907 , Tank Relief Cartridge Part No613m000001081 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Steel Ball Part Nogr6 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Drain Cock, Valve Part Nobp2rve Model 907 , Suction Strainer (40 Mesh) Part No625b050000122 Model 907 , Hex Bushing Part Nobp11bb10 Model 907 , Oil Level Window Part No241a000000284 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Grease Nipple Part Nobp1fg Model 907 , Lock Plate Part No912a020000551 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Lock Wire (As Required) Part Nol400 Model 907 , Plate Part Noeea0025704 Model 907 , Spacer Part Noeea0025803 Model 907 , Guard Part Noeea0028536 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Tank Breather Part No917a050000078 Model 907 , Clamp Plate Part Noeea0026327 Model 907 , Hex Head Bolt Part No370-0409 Model 907 , Hex Nut Part No369-0112 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Flat Washer Part Nomaw12ga Model 907 , Seat- Hyd Suspension Part No907a050000093 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Fuel Level Guard Part No907a020000043 Model 907 , Bush Part Nombh100_120_50 Model 907 , Bush Part Nombh100_120_45 Model 907 , Bush Part Nombh100_120_61 Model 907 , Canopy Assembly Part No907a070000007 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Threaded Boss Part No016a000099060 Model 907 , Eimco Logo Assy. Part No19wl020000262 Model 907 , Logo E (Big) Part No19wl020000263 Model 907 , Logo E Small Part No19wl020000264 Model 907 , Name Plate Part Noeeb0018997 Model 907 , Clamp Part Noeea0007780 Model 907 , Plate Part Noeea0027695 Model 907 , Beacon Mtg. Bkt. Part No910a020000114 Model 907 , Flashing Light Bracket Part Noeea0031660 Model 907 , Hex Head Bolt Part No370-0204 Model 907 , Spring Washer Part Nomdw06sa Model 907 , Hex Head Bolt Part No370-1013B Model 907 , Spring Washer Part Nomdw24sa Model 907 , Hex Head Bolt Part No370-1015 Model 907 , Hex Nut Part No369-0124 Model 907 , Hex Head Bolt Part No370-1009 Model 907 , Diesel Engine Part No907b050000005 Model 907 , Engine Bracket Part No907a020000059 Model 907 , Engine Bracket, Rh Part No907b020000060 Model 907 , Engine Bracket, Lh Part No907b020000061 Model 907 , Avm (Engine) Part No19wl050000865 Model 907 , Avm, Engine Part No910a050000025 Model 907 , Hex Head Bolt Part No370-0612 Model 907 , Hex Head Bolt Part No370-0623 Model 907 , Spacer Part Noeea0027233 Model 907 , Hex Head Bolt Part No370-1026 Model 907 , Hex Nut, Nyloc Part Nomt24ln Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Nut Part No369-0124 Model 907 , Flat Washer Part Nomaw24ga Model 907 , Washer, Avm Part No907a020000068 Model 907 , Transmission Part No917b050000002 Model 907 , Pipe Plug Part Noeea0026623 Model 907 , Assembly-Conv Housing & Tube Part Noeea0022609 Model 907 , Sleeve Part Noeea0013072 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Sleeve Part Noeea0008045 Model 907 , Sleeve Lock Part Noeea0008046 Model 907 , Lock Washer Part Noeea0013073 Model 907 , Tube Clip Screw Part Noeea0005690 Model 907 , O Ring Part Noeea0013079 Model 907 , Spacer Ring Part Noeea0013080 Model 907 , Tube Assy. Part Noeea0013081 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Screw, Cover Part Noeea0010946 Model 907 , Tube Clip Part Noeea0008041 Model 907 , Rev. Tube Assy. Part Noeea0011579 Model 907 , O Ring Part Noeea0013082 Model 907 , Lube Tube Assy. Part Noeea0011578 Model 907 , Tube Assy. Part Noeea0011580 Model 907 , Supply Tube Part Noeea0011583 Model 907 , Sleeve Part Noeea0013072 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Sleeve Part Noeea0008045 Model 907 , Sleeve Lock Part Noeea0008046 Model 907 , Lock Washer Part Noeea0013073 Model 907 , Tube Clip Screw Part Noeea0005690 Model 907 , Air Breather Part Noeea0005680 Model 907 , Elbow Part Noeea0011641 Model 907 , Breather Bushing Part Noeea0011556 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Screw-Conv Hsg To Trans Case Part Noeea0026624 Model 907 , Lockwasher-Pump Mounting Screw Part Noeea0026625 Model 907 , Screw-Conv Hsg To Trans Case Part Noeea0026626 Model 907 , O Ring Part Noeea0013079 Model 907 , Spacer Ring Part Noeea0013080 Model 907 , Tube Assy. Part Noeea0013081 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Screw, Cover Part Noeea0010946 Model 907 , Tube Clip Part Noeea0008041 Model 907 , Rev. Tube Assy. Part Noeea0011579 Model 907 , O Ring Part Noeea0013082 Model 907 , Lube Tube Assy. Part Noeea0011578 Model 907 , Tube Assy. Part Noeea0011580 Model 907 , Supply Tube Part Noeea0011583 Model 907 , Screw-Conv Hsg To Trans Case Part Noeea0026627 Model 907 , Gasket Part Noeea0008057 Model 907 , Pin Part Noeea0023186 Model 907 , Spacer Part Noeea0023187 Model 907 , Seal Part Noeea0005936 Model 907 , Cover-Converter Housing Front Part Noeea0026655 Model 907 , Screw Part Noeea0011557 Model 907 , Stud Nut Part Noeea0013069 Model 907 , Stud (Not Shown) Part Noeea0019387 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Gasket Part Noeea0005917 Model 907 , Hose Fitting Part Noeea0013102 Model 907 , Hose Fitting Part Noeea0013103 Model 907 , Trans. Case & Tube Assy. Part Noeea0013750 Model 907 , Tube Assy. Part Noeea0013110 Model 907 , Clip Part Noeea0013109 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Pressure Tube Part Noeea0008060 Model 907 , Rivet Part Noeea0008072 Model 907 , Cap Screw Part Noeea0019350 Model 907 , Washer Part Noeea0013112 Model 907 , Oring, Suction Line Part Noeea0005966 Model 907 , Baffle, Oil Part Noeea0008073 Model 907 , Baffle, Oil Part Noeea0008074 Model 907 , O Ring Part Noeea0011654 Model 907 , Pressure Tube Part Noeea0011587 Model 907 , Tube Part Noeea0011588 Model 907 , Retainer Ring Part Noeea0008035 Model 907 , Oil Distributor Part Noeea0011609 Model 907 , Ball Part Noeea0019351 Model 907 , Tube Assy. Part Noeea0013110 Model 907 , Clip Part Noeea0013109 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Pressure Tube Part Noeea0008060 Model 907 , Rivet Part Noeea0008072 Model 907 , Cap Screw Part Noeea0019350 Model 907 , Washer Part Noeea0013112 Model 907 , O Ring Part Noeea0026628 Model 907 , Baffle, Oil Part Noeea0008073 Model 907 , Baffle, Oil Part Noeea0008074 Model 907 , O Ring Part Noeea0026629 Model 907 , Pressure Tube Part Noeea0011587 Model 907 , Tube Part Noeea0011588 Model 907 , Retainer Ring Part Noeea0008035 Model 907 , Oil Distributor Part Noeea0011609 Model 907 , Ball Part Noeea0019351 Model 907 , Dowel Pin Part Noeea0008061 Model 907 , O Ring Part Noeea0026630 Model 907 , Magnetic Drain Plug Part Noeea0005708 Model 907 , Plug-Oil Level/Plug-Lockup Port Part Noeea0026631 Model 907 , Screen Assembly Part Noeea0005688 Model 907 , Screen Assy. Gasket Part Noeea0005687 Model 907 , Cover Part Noeea0013751 Model 907 , Gasket Part Noeea0008075 Model 907 , Capscrew Part Noeea0026633 Model 907 , Lockwasher-Pump Mounting Screw Part Noeea0026625 Model 907 , Nut Part Noeea0026634 Model 907 , Stud Part Noeea0011561 Model 907 , Pipe Plug Part Noeea0005683 Model 907 , Capscrew Part Noeea0026635 Model 907 , Lockwasher Part Noeea0026636 Model 907 , Assy-Stator Support Sleeve Part Noeea0011616 Model 907 , Turbine Shaft Part Noeea0013121 Model 907 , Piston Ring Part Noeea0008293 Model 907 , Bearing Part Noeea0019389 Model 907 , Snap Ring Part Noeea0008050 Model 907 , Piston Ring Part Noeea0008278 Model 907 , Oil Baffle Part Noeea0011573 Model 907 , Seal Ring Part Noeea0011586 Model 907 , Ring, Oil Baffle Retaining Part Noeea0010858 Model 907 , Turbine Hub Part Noeea0013122 Model 907 , Snap Ring Part Noeea0008268 Model 907 , Reaction Member Part Noeea0013123 Model 907 , Spacer Part Noeea0011571 Model 907 , Snap Ring Part Noeea0013124 Model 907 , Bearing Part Noeea0013125 Model 907 , Impeller Hub Part Noeea0013126 Model 907 , O Ring Part Noeea0013127 Model 907 , Impeller Part Noeea0026638 Model 907 , Backing Ring Part Noeea0013129 Model 907 , Screw Part Noeea0013130 Model 907 , Turbine Part Noeea0011622 Model 907 , Screw Part Noeea0008272 Model 907 , Cap Screw Part Noeea0019390 Model 907 , Oring Part Noeea0005753 Model 907 , Impeller Cover Part Noeea0013132 Model 907 , Capscrew Part Noeea0026639 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Bearing Part Noeea0013133 Model 907 , Bearing Washer Part Noeea0013134 Model 907 , Snap Ring Part Noeea0013135 Model 907 , O Ring Part Noeea0013136 Model 907 , Input Shaft Part Noeea0013137 Model 907 , Capscrew Part Noeea0026640 Model 907 , Shaft Bearing Part Noeea0011568 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Screw Part Noeea0011642 Model 907 , Gear Part Noeea0013139 Model 907 , Bearing Support Part Noeea0011574 Model 907 , Bearing Ball Part Noeea0019391 Model 907 , Ring - Snap Part Noeea0019392 Model 907 , Ring-Span Part Noeea0008296 Model 907 , Gear-Imppeller Hub - 46T Part Noeea0013084 Model 907 , Gear- Pump Drive Idler 47T Part Noeea0019393 Model 907 , Support- Pump Drive Idler Part Noeea0019394 Model 907 , Bearing- Ball 6309 Part Noeea0019395 Model 907 , Snap-Ring-Internal Part Noeea0019376 Model 907 , Gear Clutch Driven 25T Part Noeea0026653 Model 907 , Gear-High Range 52T Part Noeea0011585 Model 907 , Gear-Drive Low 4Th. 26T Part Noeea0013737 Model 907 , Gear-2Nd 30T Part Noeea0011621 Model 907 , Reverse 2Nd Shaft Piston Ring Part Noeea0005807 Model 907 , Front Bearing Retaing Ring Part Noeea0005808 Model 907 , Washer Part Noeea0013140 Model 907 , End Plate Balend Plate Ball Part Noeea0013141 Model 907 , Front Bearing Part Noeea0013142 Model 907 , Bearing Part Noeea0023197 Model 907 , Retaninng Ring Part Noeea0023198 Model 907 , Baffle Ring Part Noeea0008085 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , End Plate Part Noeea0013143 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , Inner Disc Part Noeea0013144 Model 907 , Assy. Clutch Piston & Seals Part Noeea0019377 Model 907 , Outer Seal Part Noeea0008091 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Assy-Rev & 3Rd Shaft Part Noeea0023199 Model 907 , Seal-Clutch Piston -Outer Part Noeea0022170 Model 907 , Assy-Clutch Piston & Seals Part Noeea0022169 Model 907 , End Plate Part Noeea0013149 Model 907 , Retainer Spring Part Noeea0022171 Model 907 , Washer Assy. Part Noeea0013150 Model 907 , Snap Ring Retainer Part Noeea0008098 Model 907 , Spring Retainer Snap Ring Part Noeea0005820 Model 907 , Low Speed Gear Bearing Part Noeea0005826 Model 907 , Spring Retainer Part Noeea0008101 Model 907 , Return Spring Part Noeea0008102 Model 907 , Spring Retainer Part Noeea0008103 Model 907 , Bearing Part Noeea0008104 Model 907 , Snap Ring Part Noeea0008105 Model 907 , Spacer Part Noeea0008106 Model 907 , Shield Out Part Noeea0008107 Model 907 , Rear Bearing Part Noeea0013151 Model 907 , Retainer Ring Part Noeea0008109 Model 907 , Reverse 2Nd Shaft Piston Ring Part Noeea0005807 Model 907 , Front Bearing Retaing Ring Part Noeea0005808 Model 907 , Washer Part Noeea0013140 Model 907 , End Plate Balend Plate Ball Part Noeea0013141 Model 907 , Front Bearing Part Noeea0013142 Model 907 , Front Bearing Snap Ring Part Noeea0005809 Model 907 , Bearing Part Noeea0023197 Model 907 , Retaninng Ring Part Noeea0023198 Model 907 , Baffle Ring Part Noeea0008085 Model 907 , Low Speed Gear Bearing Part Noeea0005826 Model 907 , Spring Retainer Snap Ring Part Noeea0005820 Model 907 , Snap Ring Retainer Part Noeea0008098 Model 907 , Washer Assy. Part Noeea0013150 Model 907 , Retainer Spring Part Noeea0022171 Model 907 , Ring Retainer Part Noeea0013162 Model 907 , Sanp Ring Part Noeea0013163 Model 907 , Spring Retainer Part Noeea0008103 Model 907 , Return Spring Part Noeea0008102 Model 907 , Spring Retainer Part Noeea0008101 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , End Plate Part Noeea0013143 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , Inner Disc Part Noeea0013144 Model 907 , Assy. Clutch Piston & Seals Part Noeea0019377 Model 907 , Outer Seal Part Noeea0008091 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Assy.-Fwd & 2Nd Shaft, Hub, Drum & Plug Part Noeea0023243 Model 907 , Seal-Clutch Piston -Outer Part Noeea0022170 Model 907 , Assy-Clutch Piston & Seals Part Noeea0022169 Model 907 , End Plate Part Noeea0013149 Model 907 , Gear-Clutch Driven 27T Part Noeea0023193 Model 907 , Gear-2Nd 30T Part Noeea0011621 Model 907 , Assy-Low Shaft,Hub,Drum & Plug Part Noeea0019357 Model 907 , Assy-Low Hub & Drum Part Noeea0019358 Model 907 , O Ring Part Noeea0013178 Model 907 , Retaining Ring Part Noeea0013175 Model 907 , Shaft Part Noeea0013753 Model 907 , Plug Part Noeea0013179 Model 907 , Assy-Low Hub & Drum Part Noeea0019358 Model 907 , O Ring Part Noeea0013178 Model 907 , Retaining Ring Part Noeea0013175 Model 907 , Shaft Part Noeea0013753 Model 907 , Plug Part Noeea0013179 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Assy-Clutch Piston & Seals Part Noeea0019359 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Seal-Clutch Piston -Outer Part Noeea0022170 Model 907 , Clutch Inner Disc Part Noeea0008115 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , End Plate Part Noeea0008087 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , Spring Part Noeea0013167 Model 907 , Retainer Spring Part Noeea0013168 Model 907 , Bearing Spacer Part Noeea0013170 Model 907 , Spring Retainer Part Noeea0008124 Model 907 , Snap Ring Part Noeea0008050 Model 907 , Ring Retainer Part Noeea0013169 Model 907 , Gear(54T) Part Noeea0013752 Model 907 , Bearing Assy. Part Noeea0013171 Model 907 , Piston Ring Part Noeea0008227 Model 907 , Pilot Bearing Part Noeea0008130 Model 907 , Bearing Cup Part Noeea0008156 Model 907 , Bearing Cone Part Noeea0013191 Model 907 , Cap Part Noeea0013756 Model 907 , Capscrew Part Noeea0026639 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Pipe Plug Part Noeea0005683 Model 907 , O Ring Part Noeea0026644 Model 907 , O Ring Part Noeea0026645 Model 907 , Bearing Cup Part Noeea0014098 Model 907 , Bearing Cone Part Noeea0013173 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Snap Ring Part Noeea0013135 Model 907 , Assy-4Th Hub & Drum Part Noeea0019360 Model 907 , Assy-Idler Shaft,Gear And Plugs Part Noeea0019361 Model 907 , Shaft And Bearing Assy. Part Noeea0013189 Model 907 , Bearing Lock Ball Part Noeea0008138 Model 907 , Locating Ring Part Noeea0008139 Model 907 , Washer Part Noeea0013764 Model 907 , Disc Hub Nut Part Noeea0013224 Model 907 , Gasket Part Noeea0008141 Model 907 , Cap Part Noeea0013765 Model 907 , Ber.Cap Stud Lock Washer Part Noeea0005861 Model 907 , Screw Part Noeea0013766 Model 907 , Outer Seal Part Noeea0008091 Model 907 , Assy-Clutch Piston & Seals Part Noeea0019359 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , Inner Disc Part Noeea0013144 Model 907 , End Plate Part Noeea0008087 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , Spring Retainer Part Noeea0008101 Model 907 , Return Spring Part Noeea0008102 Model 907 , Spring Retainer Part Noeea0008103 Model 907 , Snap Ring Part Noeea0011575 Model 907 , Impeller Hub Gear Bearing Part Noeea0005738 Model 907 , Gear-4Th Clutch & Hub 23T Part Noeea0019363 Model 907 , Spacer Part Noeea0011595 Model 907 , Bearing Part Noeea0011566 Model 907 , Piston Ring Part Noeea0008224 Model 907 , Oil Seal Part Noeea0013190 Model 907 , Bearing Cap Part Noeea0008145 Model 907 , O Ring Part Noeea0026648 Model 907 , Bearing Cup Part Noeea0011629 Model 907 , Bearing Cone Part Noeea0013191 Model 907 , Gear Spacer Part Noeea0013192 Model 907 , Output Shaft Part Noeea0013193 Model 907 , Bearing Cup Part Noeea0008156 Model 907 , O Ring Part Noeea0026649 Model 907 , O Ring Part Noeea0026650 Model 907 , Ber.Cap Stud Lock Washer Part Noeea0005861 Model 907 , Capscrew Part Noeea0026651 Model 907 , Capscrew Part Noeea0026652 Model 907 , Gasket Part Noeea0011617 Model 907 , O Ring Part Noeea0013311 Model 907 , O Ring Part Noeea0005695 Model 907 , O Rong Part Noeea0013214 Model 907 , Stud Part Noeea0011577 Model 907 , Gasket Part Noeea0011637 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Bearing Cap Stud Nut Part Noeea0005836 Model 907 , Pressure Regulator Part Noeea0013213 Model 907 , Plug-Oil Level/Plug-Lockup Port Part Noeea0026631 Model 907 , Valve Seat Part Noeea0011600 Model 907 , Spacer Part Noeea0011601 Model 907 , Safety Valve Plunger Part Noeea0013198 Model 907 , Valve Spring Part Noeea0008250 Model 907 , O Ring Part Noeea0026656 Model 907 , Valve Stop Part Noeea0011569 Model 907 , Roll Pin Part Noeea0011652 Model 907 , Valve Stop Part Noeea0008243 Model 907 , O Ring Part Noeea0026657 Model 907 , Valve Piston Part Noeea0011638 Model 907 , Valve Spring , Inner Part Noeea0008247 Model 907 , Valve Spring Outer Part Noeea0011613 Model 907 , Oil Seal Part Noeea0013212 Model 907 , Roll Pin Part Noeea0011602 Model 907 , Charging Pump & Cover Part Noeea0026646 Model 907 , Assyembly Charging Pump 20 Gpm Part Noeea0022635 Model 907 , Lockwasher Part Noeea0026658 Model 907 , Capscrew Part Noeea0026659 Model 907 , Gasket Part Noeea0013215 Model 907 , Pump Cover Part Noeea0013216 Model 907 , Gasket Part Noeea0013780 Model 907 , Capscrew Part Noeea0026683 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Assembly-Control Valve Cover Part Noeea0026661 Model 907 , Plug Part Noeea0021168 Model 907 , Gasket Part Noeea0013780 Model 907 , Plug-Filler Part Noeea0021190 Model 907 , Spool Part Noeea0013781 Model 907 , Pin Part Noeea0013782 Model 907 , Accumulator Spring Inner Part Noeea0005908 Model 907 , Spring Part Noeea0013783 Model 907 , Spring Part Noeea0026662 Model 907 , Fitting Plug Part Noeea0026663 Model 907 , Spool Part Noeea0026664 Model 907 , Spring Part Noeea0026665 Model 907 , Pin Part Noeea0026666 Model 907 , Shuttle Valve-Bottom Part Noeea0013786 Model 907 , Ctrl Valve & Hsg. Assy. Part Noeea0013770 Model 907 , O Ring Part Noeea0026667 Model 907 , O Ring Part Noeea0026668 Model 907 , O Ring Part Noeea0026669 Model 907 , O Ring Part Noeea0026670 Model 907 , O Ring Part Noeea0026671 Model 907 , Assy-Spool Type Solenoid Cartrigde Part Noeea0026672 Model 907 , Fitting-Plug, O Ring Seal Part Noeea0026703 Model 907 , O Ring Part Noeea0026673 Model 907 , Spring Part Noeea0013768 Model 907 , Spool-Regulator Part Noeea0026674 Model 907 , Plug Part Noeea0013179 Model 907 , Cover-Solenoid Part Noeea0026676 Model 907 , Cover-Solenoid Part Noeea0026677 Model 907 , Capscrew Part Noeea0026678 Model 907 , Lock Washer Part Noeea0013073 Model 907 , Retainer-Wire Part Noeea0026679 Model 907 , Retainer Part Noeea0026680 Model 907 , Spacer-Wire Retainer Part Noeea0026681 Model 907 , Gasket Part Noeea0013767 Model 907 , Capscrew Part Noeea0026683 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Flange Part Noeea0011972 Model 907 , O Ring, Flange Part Noeea0010959 Model 907 , Washer Part Noeea0011872 Model 907 , Nut Part Noeea0008317 Model 907 , Flange Part Noeea0013732 Model 907 , O Ring Part Noeea0013065 Model 907 , Washer Part Noeea0013064 Model 907 , Nut Part Noeea0008140 Model 907 , Pump Adaptor Part Noeea0026684 Model 907 , Gasket Part No4697203 Model 907 , Lockwasher Part Noeea0026636 Model 907 , Capscrew Part Noeea0026686 Model 907 , Pump Drive Sleeve & Snap Ring Part Noeea0019402 Model 907 , Pump Drive Hole Cover Part Noeea0019386 Model 907 , Snap Ring Part Noeea0013814 Model 907 , Snap Ring Part Noeea0008309 Model 907 , Gasket Part Noeea0011597 Model 907 , Adaptor-Pump Part Noeea0026688 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Capscrew Part Noeea0026689 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Capscrew Part Noeea0026690 Model 907 , Pump Drive Sleeve And Snap Ring Assembly Part Noeea0026691 Model 907 , Sleeve Pump Drive Part Noeea0026692 Model 907 , Snap Ring Part Noeea0008309 Model 907 , Kit-Connector, Wire & Seal Part Noeea0026654 Model 907 , Taps - Oil Fill Part Noeea0013091 Model 907 , Cab Control Part Noeea0025805 Model 907 , Duel Element Filter Assy. Part Noeea0026879 Model 907 , Filter Head Assy. Part Noeea0026880 Model 907 , Electrical Indicator Assy. Part Noeea0026881 Model 907 , Indicator Seal & Connector Nut Kit Part Noeea0026882 Model 907 , Filter Element Assy. Part Noeea0026790 Model 907 , Bracket Part No917a020000043 Model 907 , Bracket Part No917a020000044 Model 907 , Bracket Part No917a020000045 Model 907 , Bracket Part No917a020000046 Model 907 , Hex Head Bolt Part No917a060000022 Model 907 , Spring Washer Part Now12gf Model 907 , Dip Stick Part No912a050000080 Model 907 , Lock Wire (As Required) Part Nol400 Model 907 , Reducer(Bsp-Npt),M/M Part Nosc089/046 Model 907 , Elbow, 90 Degree M/F Part Nose012/026 Model 907 , Hose Assembly Part No623d02584/148 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Elbow, Street 90 Degree M/F Part Nobp6blb Model 907 , Pipe Part Noeea0026870 Model 907 , Pillow Block Bearing Part No917a050000016 Model 907 , Drive Line(Front) Part No912b050000206 Model 907 , Spider Assy. (7C) Part No912a050000208 Model 907 , Drive Line(Articulation) Part No912b050000218 Model 907 , Spider Assy. (7C) Part No912a050000208 Model 907 , Drive Line(Tr. To Rear Axle) Part No917b050000020 Model 907 , Hex Head Bolt Part Not8hg40 Model 907 , Spring Washer Part Now8gfb Model 907 , Hex Head Bolt Part No370-0612 Model 907 , Hex Nut Part No369-0116 Model 907 , Spring Washer Part Nomdw16sa Model 907 , Flat Washer Part Nomaw16ga Model 907 , Hex Head Bolt Part No370-0815 Model 907 , Hex Nut Part No369-0120 Model 907 , Spring Washer Part Nomdw20sa Model 907 , Hex Head Bolt Part Not6hg32 Model 907 , Spring Washer Part Now6gf Model 907 , Upbox Part No917b050000090 Model 907 , Radial Seal Ring Part Noeea0027541 Model 907 , Drive Flange Part Noeea0027542 Model 907 , Hexagon Screw Part Noeea0027543 Model 907 , Disk Part Noeea0027544 Model 907 , Disk Part Noeea0027545 Model 907 , Housing Part Noeea0027546 Model 907 , Screw Plug Part Noeea0027547 Model 907 , Sealing Ring Part Noeea0027548 Model 907 , Screw Plug Part Noeea0027549 Model 907 , Breather Part Noeea0027550 Model 907 , Plate Part Noeea0027551 Model 907 , Hexagon Socket Screw Part Noeea0027552 Model 907 , Sleeve Part Noeea0027553 Model 907 , Hexagon Screw Part Noeea0027554 Model 907 , Radial Seal Ring Part Noeea0027555 Model 907 , Angle Piece Part Noeea0027556 Model 907 , Cover Part Noeea0027557 Model 907 , Gear Wheel Part Noeea0027558 Model 907 , Pinion Part Noeea0027559 Model 907 , Shaft Part Noeea0027560 Model 907 , Hexagon Socket Screw Part Noeea0027561 Model 907 , Bearing Part Noeea0027562 Model 907 , Bearing Part Noeea0027563 Model 907 , Cover Part Noeea0027564 Model 907 , Hexagon Screw Part Noeea0027565 Model 907 , Pinion Part Noeea0027566 Model 907 , Grooved Ball Bearing Part Noeea0027567 Model 907 , Grooved Ball Bearing Part Noeea0027568 Model 907 , Flange Part Noeea0027569 Model 907 , Hexagon Screw Part Noeea0027570 Model 907 , Cover Part Noeea0027571 Model 907 , Hexagon Screw Part Noeea0027572 Model 907 , Driver Part Noeea0027573 Model 907 , Pipe Part Noeea0027574 Model 907 , Sealing Ring Part Noeea0027575 Model 907 , O-Ring Part Noeea0027576 Model 907 , O-Ring Part Noeea0027577 Model 907 , Coupling Part No917b050000118 Model 907 , Adaptor Plate Part Noeea0026883 Model 907 , Stud Part No907a020000017 Model 907 , Hex Nut Part No369-0110 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Drive Line Part No917b050000092 Model 907 , Spider Assy. - 6C Part No907a050000050 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Spacer Part No912a060000178 Model 907 , Wheel Assy. Part No907b070000067 Model 907 , Wheel Rim Part No917b050000009 Model 907 , Sleek Tyre 17.5 X R25 Part No907a050000091 Model 907 , Valve, Wheel Rim Part No907a050000075 Model 907 , Steering Hydraulic Group Part No907b070000029 Model 907 , Feeder Unit Block Part No19wl050000019 Model 907 , Accumulator Part No12wl050000999 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Relief Cartridge Part Noeea0008997 Model 907 , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 907 , Accumulator (4-Ltr) Part No811a050000191 Model 907 , Seal Kit For (*) Marked Items Part Noeea0019109 Model 907 , Sealing Ring Part Noeea0022384 Model 907 , O-Ring Part Noeea0022385 Model 907 , Pilot Valve Part No910b050000055 Model 907 , 2 Way Poppet Valve(Nc) Part No907a050000001 Model 907 , Gasket Part No912a050000229 Model 907 , Accumulator Charge Valve Part No912b050000309 Model 907 , Repair Kit Part Noeea0018821 Model 907 , Suction Flange Part No917a020000061 Model 907 , Suction Flange Part No917a020000062 Model 907 , Feeder Block Mounting Bracket Part No917a020000068 Model 907 , Check Valve Part No907a050000004 Model 907 , Steering Contrl Valve Part No917b050000115 Model 907 , Hydraulic Pump(Steering And Brake) Part No917b050000017 Model 907 , M14 Screw Part Noeea0026292 Model 907 , M14 Nut Part Noeea0026293 Model 907 , Oil Seal Part Noeea0011535 Model 907 , Thr. Plate Part Noeea0026294 Model 907 , Seal. Chann Part Noeea0026295 Model 907 , Seal. Bk-Up Part Noeea0026296 Model 907 , Seal Sect. Part Noeea0026297 Model 907 , Plug Part Noeea0022648 Model 907 , Seal Kit Part Noeea0026838 Model 907 , Split Flange Half (Code 61) Part Nod10a010000032 Model 907 , Special Fitting Part No907a050000067 Model 907 , Manifold Part No907b020000051 Model 907 , Bracket, Acc. Charge Vlv Part No912a020000652 Model 907 , Pipe Bend (90 Degree) Part No917a050000058 Model 907 , Clamp Part Noeea0019155 Model 907 , Hose Clip Part Nop105phb Model 907 , O Ring Part Nos2712 Model 907 , O Ring Part Nos2803 Model 907 , O Ring 32.92X3.53-N-Nbr90 Part No341-5030 Model 907 , Hose Assy. Part No907a050000065 Model 907 , Hose Assy. Part No907a050000066 Model 907 , Hyd.Hose Part Nostdb025/004 Model 907 , Hyd.Hose Part No625a050000113 Model 907 , Hose Assy. Part Nostdd026/039 Model 907 , Hose Assy. Part Nostdd026/084 Model 907 , Hose Assy. Part Nostdd026/112 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Hose Assy. Part Nostdd026/309 Model 907 , Hose Assy. Part Nostdd026/310 Model 907 , Hose Assy. Part Nostdd026/317 Model 907 , Hose Assy. Part Nostdd026/321 Model 907 , Hose Assy. Part Nostdd026/323 Model 907 , Hose Assy. Part Nostdd026/327 Model 907 , Hose Assy. Part Nostdd026/334 Model 907 , Hose Assy. Part Nostdd033/033 Model 907 , Hose Assy. Part Nostdd033/037 Model 907 , Hose Assy. Part Nostdd033/094 Model 907 , Hex Bushing Part Nobp8bb7 Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , Straight Adaptor Part Nose024/202 Model 907 , Straight Adaptor Part Nose024/203 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Straight Adaptor Part Nose024/209 Model 907 , Straight Adaptor Part Nose024/211 Model 907 , Straight Adaptor Part Nose024/212 Model 907 , Straight Adaptor Part Nose024/217 Model 907 , Straight Adaptor Part Nose024/218 Model 907 , Straight Adaptor Part Nose024/219 Model 907 , Straight Adaptor Part Nose024/429 Model 907 , Straight Adaptor Part Nose024/430 Model 907 , Swivel Adaptor (F/F) Part Nose024/431 Model 907 , Adaptor Part Nose024/454 Model 907 , Tee Part Novu10f10e01ds Model 907 , Swivel Nut Elbow Part Novu10f10e21bs Model 907 , Elbow 45 Deg Part Novu10f10e21cs Model 907 , Reducer Part Novu10f16e16as Model 907 , St. Adaptor Part Novu10f8e16as Model 907 , St. Adaptor Part Novu12f12e16as Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Adaptor Part Novu12f12e33ds Model 907 , Adaptor Part Novu12f16e16as Model 907 , Elbow 90 Degree Part Novu16f16e20bs Model 907 , Swivel Nut Elbow Part Novu16f16e21bs Model 907 , Straight Adaptor Part Novu6f6e16as Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Swivel, Tee Part Novu6f6e25ds Model 907 , Swivel Nut Branch Tee Part Novu6f6e33ds Model 907 , Elbow 90 Degree Part Novu6f8e20bs Model 907 , Elbow 90 Degree Part Novu8f8e21bs Model 907 , Hex Nut Part No369-0106 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Nut Part No369-0112 Model 907 , Hex Head Bolt Part No370-0206 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Hex Head Bolt Part No370-0403 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Threaded Boss (M12x15lg) Part Noeea0016795 Model 907 , Flat Washer Part Nomaw06ga Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hex Head Bolt Part Not6gg12 Model 907 , Hex Head Bolt Part Not8gg28 Model 907 , Spring Washer Part Now8gf Model 907 , Pressure Filter Part No811a050000182 Model 907 , Filter Element Part Noeea0018438 Model 907 , Filter Mounting Bracket Part No917a020000087 Model 907 , Hex Head Bolt Part No370-0420 Model 907 , Bracket, Pilot Valve Part No910a020000187 Model 907 , Bracket Part Noeea0025607 Model 907 , Plate Part Noeea0025606 Model 907 , Hex Nut Part Nomt28mgg Model 907 , Hose Assy. Part Nostdd033/114 Model 907 , Boss Part Noeea0001567 Model 907 , Service Hydraulic Group Part No907b070000030 Model 907 , Manifold Block Part No910a050000019 Model 907 , Check Valve Part Noeea0030269 Model 907 , Seal Kit, Check Valve Part Noeea0030272 Model 907 , Direction Valve Part Noeea0030270 Model 907 , Seal Kit, Direction Valve Part Noeea0030273 Model 907 , Solenoid Valve Part Noeea0030271 Model 907 , Seal Kit, Solenoid Valve Part Noeea0030274 Model 907 , 3/2 Way Valve Part No19wl050000655 Model 907 , Check Valve Part No625a050000111 Model 907 , Gasket Part No912a050000229 Model 907 , Hydraulic Hand Pump Part No611b050000326 Model 907 , Hydraulic Pump(Steering And Brake) Part No917b050000017 Model 907 , M14 Screw Part Noeea0026292 Model 907 , M14 Nut Part Noeea0026293 Model 907 , Oil Seal Part Noeea0011535 Model 907 , Thr. Plate Part Noeea0026294 Model 907 , Seal. Chann Part Noeea0026295 Model 907 , Seal. Bk-Up Part Noeea0026296 Model 907 , Seal Sect. Part Noeea0026297 Model 907 , Plug Part Noeea0022648 Model 907 , Seal Kit Part Noeea0026838 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Relief Cartridge Part Noeea0008997 Model 907 , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 907 , Return Filter Part No611a050000018 Model 907 , Filter Element Part Noeea0003479 Model 907 , Container Part Noeea0000029 Model 907 , O Ring (*) Part Noeea0000031 Model 907 , O Ring (*) Part Noeea0000032 Model 907 , O Ring (*) Part Noeea0000033 Model 907 , Hex Socket Head Cap Screw Part No370-2409 Model 907 , Sealkit,(*)Marked Items Part Noeea0001034 Model 907 , Service Control Vale Part No907b050000089 Model 907 , T-Bolt Clamp Part No12wl050000817 Model 907 , Suction Flange Part No917a020000064 Model 907 , Suction Flange Part No917a020000063 Model 907 , Stand Pipe Part No803a000000337 Model 907 , Split Flange Half (Code 61) Part Nod10a010000032 Model 907 , Quick Release Coupling Part No625a050000011 Model 907 , Bspp Socket Part No625a050000106 Model 907 , Bspp Plug Part No625a050000107 Model 907 , Plug For Qrc Part No625a060000008 Model 907 , Pipe Bend (90 Degree) Part No917a050000058 Model 907 , Manifold Part No907b020000051 Model 907 , Hose Clip Part Nop105phb Model 907 , Flanged Pipe Part Noeea0025628 Model 907 , Elbow Part Nod06a050000150 Model 907 , O Ring 32.92X3.53-N-Nbr90 Part No341-5030 Model 907 , O Ring Part Nos2816 Model 907 , O Ring Part Nos2803 Model 907 , Hose Assy. Part No917a050000068 Model 907 , Hose Assy. Part Nostdd026/039 Model 907 , Hose Assy. Part Nostdd026/289 Model 907 , Hose Assy. Part Nostdd026/295 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Hose Assy. Part Nostdd026/310 Model 907 , Hose Assy. Part Nostdd026/315 Model 907 , Hose Assy. Part Nostdd026/380 Model 907 , Hose Assy. Part Nostdd032/030 Model 907 , Hose Assy. Part Nostdd032/042 Model 907 , Hose Assy. Part Nostdd032/047 Model 907 , Hose Assy. Part Nostdd033/014 Model 907 , Hose Assy. Part Nostdd033/106 Model 907 , Hyd. Hose Part Nostdb025/013 Model 907 , Hyd.Hose (51 Mm) Part No625a050000113 Model 907 , Hyd. Hose Part Nostdb025/014 Model 907 , Hyd.Hose (51 Mm) Part No625a050000113 Model 907 , Hyd.Hose Part Nostdb025/004 Model 907 , Hyd.Hose (51 Mm) Part No625a050000113 Model 907 , Hydraulic Hose Part No19wl050000562 Model 907 , Adaptor Part Nod06a050000132 Model 907 , Adaptor Part Novu12f12e33ds Model 907 , Adaptor Part Novu12f16e16as Model 907 , Adaptor Part Novu16f16e16asb Model 907 , Adaptor Part Novu8f8e21cs Model 907 , Adaptor (Unf To Jic) Part Novu20f20e20asa Model 907 , Elbow 45 Deg. Part Novu12f12e21cs Model 907 , Elbow 90 Degree Part Novu8f8e21bs Model 907 , Elbow, 90 Degree M/F Part Nose012/022B Model 907 , Elbow, 90 Degree M/F Part Nose012/026 Model 907 , Elbow,Std.90 Degree F/F Part Nobp8bl Model 907 , Gauge Adaptor Part Noeea0003750 Model 907 , Reducer, M/M Part Nose012/096 Model 907 , Reducer, M/M Part Nose012/097 Model 907 , Special Elbow Part Noeea0028571 Model 907 , Special Elbow Part Noeea0017326 Model 907 , St. Adaptor Part Nose024/081 Model 907 , St.Swivel Adaptor M/F Part Nose012/062 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , Straight Adaptor Part Nose024/202 Model 907 , Straight Adaptor Part Nose024/203 Model 907 , Straight Adaptor Part Nose024/206 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Straight Adaptor Part Nose024/209 Model 907 , Straight Adaptor Part Nose024/211 Model 907 , Straight Adaptor Part Nose024/217 Model 907 , Straight Adaptor Part Nose024/427 Model 907 , Straight Adaptor Part Novu6f6e16as Model 907 , Straight Adaptor M/M Part Nose024/207 Model 907 , Straight Adaptor, M/M Part Nose012/085 Model 907 , Swivel Adaptor (F/F) Part Nose024/431 Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Swivel Nut Branch Tee Part Novu6f6e33ds Model 907 , Swivel Nut Elbow Part Novu16f16e21bs Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Swivel, Tee Part Novu6f6e25ds Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Flat Washer Part Nomaw12ga Model 907 , Hex Bushing Part Nobp9bb8 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Hex Head Bolt Part No370-0420 Model 907 , Hex Head Bolt Part No370-0607 Model 907 , Hex Head Bolt Part Not8gg28 Model 907 , Hex Head Plug (Bsp) Part Nosc036/002 Model 907 , Hex Head Plug (Bsp) Part Nosc036/004 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Hex. Head Plug (1-5/8Unf-2A) Part Nosc036/056 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw16sa Model 907 , Spring Washer Part Now8gf Model 907 , Hose Sleeve Part No611a050000139 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Manifold Block Part No910b050000054 Model 907 , Pressure Filter Part No811a050000182 Model 907 , Filter Element Part Noeea0018438 Model 907 , Filter Mounting Bracket Part No917a020000087 Model 907 , Hose Assy. Part Nostdd033/114 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Boss Part Noeea0001567 Model 907 , Hose Assy. Part Nostdd033/037 Model 907 , Hose Assy. Part Nostdd026/024 Model 907 , Hose Assy. Part Nostdd033/024 Model 907 , Hose Assembly Part No623d02584/182 Model 907 , Hose Assembly Part No623d02584/201 Model 907 , Hose Assy. Part Nostdd026/323 Model 907 , Hose Assy. Part Nostdd026/092 Model 907 , Hose Assy. Part Nostdd026/047 Model 907 , Hose Assy. Part Nostdd026/317 Model 907 , Hose Assy. Part Nostdd026/328 Model 907 , Hose Assembly Part No623d02584/753 Model 907 , Hose Assembly Part No623d02584/756 Model 907 , Speical Fitting Part Noeea0029310 Model 907 , Threaded Boss Part Noeea0027253 Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Reducer, M/M Part Nose012/095 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Hex Head Plug (Bsp) Part Nosc036/003 Model 907 , Threaded Boss (M12x15lg) Part Noeea0016795 Model 907 , Straight Adaptor Part Nose024/219 Model 907 , Swivel Nut Elbow Part Novu10f10e21bs Model 907 , Hose Assy. Part No907a050000065 Model 907 , Straight Adaptor Part Novu10f10e01as Model 907 , St. Adaptor Part Nose024/210 Model 907 , Straight Adaptor Part Nose024/430 Model 907 , St.Swivel Adaptor M/F Part Nose012/066 Model 907 , Reducer, M/M Part Nose012/101 Model 907 , Straight Adaptor Part Nose024/212 Model 907 , Hose Assy. Part Nostdd026/314 Model 907 , Hose Assy. Part Nostdd026/025 Model 907 , Hose Assy Part Nostdd033/023 Model 907 , Hose Assy. Part Nostdd033/039 Model 907 , Hose Assy. Part Nostdd033/031 Model 907 , Special Fitting Part Noeea0029315 Model 907 , Hydraulic Pump Part No910b050000063 Model 907 , Hydraulic Pump, Brake Oil Part No907b050000025 Model 907 , Screw Part Noeea0027587 Model 907 , Washer Part Noeea0027588 Model 907 , Seal Part Noeea0027589 Model 907 , Standard Seal Part Noeea0027590 Model 907 , Shaft Seal Part Noeea0027591 Model 907 , Ring Part Noeea0027592 Model 907 , Anti Extrusion Part Noeea0027593 Model 907 , Dowel Pin Part Noeea0027594 Model 907 , Seal Kit Part Noeea0029260 Model 907 , Pressure Filter Part No811a050000182 Model 907 , Filter Element Part Noeea0018438 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Relief Cartridge Part Noeea0008997 Model 907 , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 907 , Valve, Check 50 Psi Crack Part No117439 Model 907 , Accumulator (4-Ltr) Part No811a050000191 Model 907 , Seal Kit For (*) Marked Items Part Noeea0019109 Model 907 , Sealing Ring Part Noeea0022384 Model 907 , O-Ring Part Noeea0022385 Model 907 , Brake Valve Part No917b050000013 Model 907 , Repair Kit, Brake Valve Part Noeea0025375 Model 907 , 3 Way Dcv Part No811a050000158 Model 907 , 3/2 Way Valve Part No19wl050000655 Model 907 , Gasket Part No907a050000047 Model 907 , Gasket Part No912a050000229 Model 907 , Suction Flanged Part No910a020000228 Model 907 , Stand Pipe Part No625a060000092 Model 907 , Stand Pipe (1 1/4 Bspt) Part No621a000000202 Model 907 , Special Elbow Part Noeea0012523 Model 907 , Elbow, 90 Degree M/F Part Nose012/024 Model 907 , Half Coupling Part Nobp2fka Model 907 , Special Elbow Part No912a020000477 Model 907 , Return Manifold Part No822b020000066 Model 907 , Half Coupling Part Nobp7fka Model 907 , Half Coupling Part Nobp8fka Model 907 , Coupling Part Nostdd017/014 Model 907 , Coupling Part Nostdd017/015 Model 907 , Quick Release Coupling Part No912a050000201 Model 907 , Plug Part No912a060000188 Model 907 , Manifold Block Part No917b060000025 Model 907 , Manifold Block Part No917b060000021 Model 907 , Gauge Panel Assy. Part No907a070000028 Model 907 , Bracket For Gauge Isolator Part No907b020000064 Model 907 , Pres.Gauge Isolator Valve Part No811a050000013 Model 907 , Drive Oil Pressure Gauge Part No813b000000182 Model 907 , Oil Pressure Gauge Part No917b050000080 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Head Bolt Part Nostdb035-10-25 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Socket Head Cap Screw Part No370-2141 Model 907 , Hex Nut Part No369-0105 Model 907 , Spring Washer Part Nomdw05sa Model 907 , Gauge Adaptor Part No811a060000088 Model 907 , St.Swivel Adaptor M/F Part Nose012/062 Model 907 , Filter Mounting Bracket Part No917a020000087 Model 907 , Bulkhead Bar Weldment Part No917a020000072 Model 907 , Plate Part Noeea0025411 Model 907 , Tee Adaptor Part No105635 Model 907 , Tee Adaptor Part No102273 Model 907 , O Ring Part Nos3308 Model 907 , Clamp Part Noeea0019155 Model 907 , Gauge Adaptor Part Noeea0009296 Model 907 , Hose Assembly Part No623d02584/333 Model 907 , Hose Part No625a00397/026 Model 907 , Hyd.Hose (38 Mm) Part Noeea0009461 Model 907 , Hose Clamp Part Nop9phb Model 907 , Hose Assy. Part Nostdd026/010 Model 907 , Hose Assy. Part Nostdd026/019 Model 907 , Hose Assy. Part Nostdd026/024 Model 907 , Hose Assy. Part Nostdd026/031 Model 907 , Hose Assy. Part Nostdd026/034 Model 907 , Hose Assy. Part Nostdd026/035 Model 907 , Hose Assy. Part Nostdd026/045 Model 907 , Hose Assy. Part Nostdd026/047 Model 907 , Hose Assy. Part Nostdd026/051 Model 907 , Hose Assy. Part Nostdd026/065 Model 907 , Hose Assy. Part Nostdd026/085 Model 907 , Hose Assy. Part Nostdd026/092 Model 907 , Hose Assy. Part Nostdd026/108 Model 907 , Hose Assy. Part Nostdd026/123 Model 907 , Hose Assy. Part Nostdd026/182 Model 907 , Hose Assy. Part Nostdd026/190 Model 907 , Hose Assy. Part Nostdd026/283 Model 907 , Hose Assy. Part Nostdd026/285 Model 907 , Hose Assy. Part Nostdd026/295 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Hose Assy. Part Nostdd026/309 Model 907 , Hose Assy. Part Nostdd026/314 Model 907 , Hose Assy. Part Nostdd026/315 Model 907 , Hose Assy. Part Nostdd026/317 Model 907 , Hose Assy. Part Nostdd026/328 Model 907 , Hose Assy. Part Nostdd026/335 Model 907 , Hose Assy. Part Nostdd033/014 Model 907 , Hose Assy. Part Nostdd033/041 Model 907 , Hoseassy. Part Nostdd033/047 Model 907 , Adaptor Part No907a050000039 Model 907 , St. Adaptor (Metric To Jic) Part No917a050000060 Model 907 , St. Adaptor(Metric To Jic) Part No917a050000061 Model 907 , St. Adaptor(Metric To Jic) Part No917a050000062 Model 907 , Fitting Part Noeea0004895 Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Elbow, 90 Degree M/F Part Nose012/024 Model 907 , Elbow, 90 Degree M/F Part Nose012/026 Model 907 , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/044 Model 907 , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/046 Model 907 , St.Swivel Adaptor M/F Part Nose012/066 Model 907 , St.Swivel Adaptor M/F Part Nose012/067 Model 907 , Straight Adaptor, M/M Part Nose012/082 Model 907 , Straight Adaptor, M/M Part Nose012/085 Model 907 , Straight Adaptor, M/M Part Nose012/086 Model 907 , Reducer, M/M Part Nose012/100 Model 907 , Reducer, M/M Part Nose012/101 Model 907 , St. Adaptor Part Nose024/008 Model 907 , St. Adaptor Part Nose024/009 Model 907 , St. Adaptor Part Nose024/078 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , Straight Adaptor Part Nose024/202 Model 907 , Straight Adaptor Part Nose024/203 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Straight Adaptor Part Nose024/211 Model 907 , Straight Adaptor Part Nose024/214 Model 907 , Straight Adaptor Part Nose024/217 Model 907 , Straight Adaptor Part Nose024/218 Model 907 , Straight Adaptor Part Nose024/219 Model 907 , Straight Adaptor Part Nose024/220 Model 907 , Straight Adaptor Part Nose024/287 Model 907 , Tee, M/M/F Part Nose024/330 Model 907 , Straight Adaptor Part Novu10f10e16as Model 907 , Swivel Tee, 7/8 Part Novu10f10e20ds Model 907 , Swivel Nut Elbow Part Novu10f10e21bs Model 907 , St. Adaptor Part Novu10f8e16as Model 907 , St. Adaptor Part Novu12f12e16as Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Adaptor Part Novu12f12e33ds Model 907 , Adaptor Part Novu12f16e16as Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Swivel Nut Elbow Part Novu6f6e21cs Model 907 , Swivel, Tee Part Novu6f6e25ds Model 907 , Swivel Nut Branch Tee Part Novu6f6e33ds Model 907 , Straight Adaptor Part Novu8f12e02as Model 907 , Fitting Part Novu8f12e02bs Model 907 , Hyd Fitting Part Novu8f12e16as Model 907 , Hyd Fitting Part Novu8f8e16as Model 907 , Elbow 90 Degree Part Novu8f8e21bs Model 907 , Adaptor Part Novu8f8e21cs Model 907 , Swivel Tee, 3/4 Part Novu8f8e26ds Model 907 , Hex Nut Part No369-0112 Model 907 , Bolt Hex M6x35 8.8 Zyp 5-8 M Part No370-0212 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Hex Head Bolt Part No370-0404 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Hex Socket Head Cap Screw Part No370-2338 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hex Head Plug (Bsp) Part Nosc036/002 Model 907 , Hex. Head Plug (1-1/16Unf-2A) Part Nosc036/054 Model 907 , Sp. Elbow Part Noeea0027448 Model 907 , Pipe Manifold Part No907a020000056 Model 907 , Coupling Part Nostdd017/012 Model 907 , Coupling Part Nostdd017/013 Model 907 , Coupling Part Nostdd017/014 Model 907 , Hex Head Plug (Bsp) Part Nosc036/001 Model 907 , Hex Head Plug (Bsp) Part Nosc036/006 Model 907 , Hex Head Plug (Bsp) Part Nosc036/008 Model 907 , O Ring Part Nos3306 Model 907 , O Ring Part Nos3310n Model 907 , O Ring Part Nos3312n Model 907 , O Ring Part Nos3316n Model 907 , O Ring Part Nos3320 Model 907 , Flow Control Valve Part Nor2c050000101 Model 907 , O Ring Part Nos2803 Model 907 , Hex Head Bolt Part Nostdb035-12-30 Model 907 , Flanged Adaptor Part No910a020000227 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , O Ring Part Nos2722 Model 907 , Hex Head Bolt Part Nostdb035-10-30 Model 907 , Manifold Block Part No910b050000054 Model 907 , Straight Adaptor Part Nose024/221 Model 907 , Special Fitting Part Noeea0029644 Model 907 , Hose Assy. Part Nostdd026/084 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Straight Adaptor Part Nose024/222 Model 907 , Straight Adaptor Part Nose024/430 Model 907 , Straight Adaptor M/M Part Nose024/207 Model 907 , Straight Adaptor Part Nose024/209 Model 907 , Straight Adaptor Part Nose024/212 Model 907 , Banjo Adaptor Assy. M/M Part Nose012/144 Model 907 , St. Adaptor Part Nose024/079 Model 907 , Swivel Nut Elbow Part Novu16f16e21bs Model 907 , Hose Assy. Part Nostdd033/031 Model 907 , Hose Assy. Part Nostdd033/110 Model 907 , Hose Assy. Part Nostdd026/152 Model 907 , Hose Assy. Part Nostdd026/104 Model 907 , Hex Head Bolt Part Nostdb035-10-25 Model 907 , Threaded Boss(M10x15lg) Part Noeea0016870 Model 907 , Hose Assy. Part Nostdd026/110 Model 907 , Transmission Hydraulic Group Part No907b070000032 Model 907 , Bracket For Trans. Filter Part No917a020000075 Model 907 , Flange Elbow Part No917a050000046 Model 907 , Adapter Male/Female - Jic Part Nod06a050000050 Model 907 , Gauge Adaptor Part Noeea0009296 Model 907 , Sp. Fitting Part Noeea0026859 Model 907 , Hose Assy. Part Nostdd026/306 Model 907 , Hose Assy. Part Nostdd033/055 Model 907 , Hose Assy. Part Nostdd033/060 Model 907 , Hose Assy. Part Nostdd033/062 Model 907 , St. Adaptor Part Novu12f12e16as Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Elbow 45 Deg. Part Novu12f12e21cs Model 907 , Straight Adaptor Part Novu6f2e02as Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Hex Head Bolt Part Not6gg16 Model 907 , Hex Head Bolt Part Not8gg26 Model 907 , Hex Socket Head Cap Screw Part Not8gh28 Model 907 , Spring Washer Part Now6gf Model 907 , Spring Washer Part Now8gf Model 907 , Hyd. Oil Cooler Part No917b050000120 Model 907 , Hydraulic Cooler Matrix(40Kw) Part Noeea0027901 Model 907 , Transmission Cooler Matrix(70Kw) Part Noeea0027902 Model 907 , Brake Cooler Matrix(15Kw) Part Noeea0027903 Model 907 , Fan House-Em Part Noeea0027904 Model 907 , Fan-580/7/S38zl/38/Pag/74.75 Part Noeea0027905 Model 907 , Motor Bracket-Em Part Noeea0027906 Model 907 , Hydraulic Motor Part Noeea0027907 Model 907 , Seal Kit For Hyd. Motor Part Noeea0028875 Model 907 , Ring, Snap Part Noeea0028876 Model 907 , Lip Seal Part Noeea0028877 Model 907 , Spacer Part No907a020000070 Model 907 , Hex Head Bolt Part No370-0328 Model 907 , Flat Washer Part Now6ga Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hyd. Oil Cooler Mtg. Bracket Part No907b020000069 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Spring Washer Part Nomdw08sa Model 907 , Hex Head Bolt Part No370-0244 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Flat Washer Part Now5ga Model 907 , Front Control Panel Group Part No907b070000054 Model 907 , Front Control Panel Box Assy Part No907b040000006 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0412 Model 907 , Mounting Plate Part No917a020000078 Model 907 , Front Panel Box Part No917b020000057 Model 907 , Clamp Part Noeea0007778 Model 907 , Front Control Panel Part No907b050000087 Model 907 , Rubber Sheet Part Noeea0025389 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , 7 Display Part No910b040000044 Model 907 , Connector Kit(Pv780) Part No910a040000045 Model 907 , Starting Switch Part No19wl040000073 Model 907 , Emergency Stop Push Button Part Noeea0022291 Model 907 , Emergency Stop Marker Part Noeea0029991 Model 907 , Relay Module Part Noepra040000007 Model 907 , Buzzer 24V Dc Part No19wl040000084 Model 907 , On Delay Timer (Crouzet) Part No910a040000059 Model 907 , Terminals Part Noeea0022453 Model 907 , Terminal Block(Black) Part Noeea0029389 Model 907 , Terminal End Plate Part Noeea0022455 Model 907 , End Clamps Part Noeea0021276 Model 907 , Terminal Block Part Noeea0028566 Model 907 , Terminal Block(Kut10,Yellow) Part Noeea0029453 Model 907 , Terminal Block(Kut10,Green) Part Noeea0029454 Model 907 , End Plate Part Noeea0028567 Model 907 , Mounting Rail Part Noeea0021275 Model 907 , Rect.Fork Type Terminal Part No912a040000095 Model 907 , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 907 , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 907 , Cable End Sleeve Terminal(6 Sq.Mm) Part Noeea0030117 Model 907 , Plate Part Noeea0029723 Model 907 , Slotted Pan Head Screw Part Nomt05eb16g Model 907 , Hex. Nut Part Nomt05lgg Model 907 , Rubber Sheet Part Noeea0026924 Model 907 , Rubber Sheet Part Noeea0026925 Model 907 , Plate Part Noeea0028469 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Spring Washer Part Nomdw06sa Model 907 , Slotted Button Head Screw Part No370-5113 Model 907 , Flat Washer Part Nomaw06ga Model 907 , S.C Cable Gland(3/4Et) Part Noeea0029761 Model 907 , S.C Cable Gland(3/4Et) Part Noeea0030009 Model 907 , S.C Cable Gland(1Et) Part Noeea0029760 Model 907 , Cable Gland Pvc Hood (3/4 Et) Part Noeea0029992 Model 907 , Cable Gland Pvc Hood (1 Et) Part Noeea0029993 Model 907 , Contact Block(No) Part Noeea0027986 Model 907 , Side Control Panel Box Assy Part No907b040000008 Model 907 , Hex Head Bolt Part No370-0238 Model 907 , Hex Head Bolt Part No370-0314B Model 907 , Side Control Panel Box Part No917b020000056 Model 907 , Mounting Rail Part Noeea0021275 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Rubber Sheet Part Noeea0025422 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Slotted Pan Head Screw Part Nomt05eb16g Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Spring Washer Part Nomdw06sa Model 907 , Flat Washer Part Nomaw06ga Model 907 , Hex Nut Part No369-0106 Model 907 , Hex Nut Part No369-0110 Model 907 , Side Control Panel Part No907b050000099 Model 907 , Push Button - 3 Position Part No116602 Model 907 , Selector Switch Part Noepra040000001 Model 907 , Selector Switch (3 Pos.) Part No910a040000014 Model 907 , Mecan1905 Part No907b040000001 Model 907 , Relay - 24 Volt Part No116600 Model 907 , Relay Module Part Noepra040000007 Model 907 , Timer Part Noeea0020754 Model 907 , Dc/Dc Convertor Part No907a040000030 Model 907 , Circuit Breaker, 32A Part Noeea0024825 Model 907 , Circuit Breaker, 6A Part No19wl871050265 Model 907 , Circuit Breaker,10A Part No19wl871050023 Model 907 , Circuit Breaker, 16A Part Noeea0025390 Model 907 , Mcb Link(10 Way) Part No907a040000004 Model 907 , Multi-Level Terminal Part Noeea0029579 Model 907 , End Plate Part Noeea0029611 Model 907 , Terminal Block(Black) Part Noeea0029389 Model 907 , Terminal End Plate Part Noeea0022455 Model 907 , End Clamps Part Noeea0021276 Model 907 , Terminal Block Part Noeea0028566 Model 907 , Terminal Block(Kut10,Yellow) Part Noeea0029453 Model 907 , Terminal Block(Kut10,Green) Part Noeea0029454 Model 907 , End Plate Part Noeea0028567 Model 907 , Mounting Din Rail Part Noeea0022456 Model 907 , Marker(15) Part No910a040000026 Model 907 , S.C Cable Gland(3/4Et) Part Noeea0029761 Model 907 , S.C Cable Gland(3/4Et) Part Noeea0030009 Model 907 , S.C Cable Gland(1Et) Part Noeea0029760 Model 907 , Cable Gland Pvc Hood (3/4 Et) Part Noeea0029992 Model 907 , Cable Gland Pvc Hood (1 Et) Part Noeea0029993 Model 907 , Positive Lock Female Terminal Part Noeea0025631 Model 907 , Diode Terminal Block Part Noeea0028499 Model 907 , Diode Block End Plate Part Noeea0029314 Model 907 , Rect.Fork Type Terminal Part No912a040000095 Model 907 , Diode Circuit Part No12wl040000213 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Flat Washer Part Nomaw06ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Slotted Pan Head Screw Part Nomt05eb16g Model 907 , Hex Nut Part No369-0106 Model 907 , Cable Duct Part Noeea0030113 Model 907 , Sleeve,Flexib(Bend)Spireal Cut Part No912a040000144 Model 907 , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 907 , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 907 , Cable End Sleeve Terminal(6 Sq.Mm) Part Noeea0030117 Model 907 , Male Connector Housing(12 Way) Part Noeea0028690 Model 907 , Male Wedge Lock(12 Way) Part Noeea0028698 Model 907 , Female Connector Housing(12 Way) Part Noeea0028694 Model 907 , Female Wedge Lock(12 Way) Part Noeea0028702 Model 907 , Male Connector Housing(6 Way) Part Noeea0028688 Model 907 , Male Wedge Lock(6 Way) Part Noeea0028696 Model 907 , Female Connector Housing(6 Way) Part Noeea0028692 Model 907 , Female Wedge Lock(6 Way) Part Noeea0028700 Model 907 , Socket For Dt Plug Part Noeea0027064 Model 907 , Pin For Dt Receptacle Part Noeea0027062 Model 907 , Terminating Resistor Link Part Noeea0026749 Model 907 , Cross Connection Link Assy Part Nostda038/05 Model 907 , Marker(0-100) Part No910a040000024 Model 907 , Marker(30) Part No910a040000025 Model 907 , Flexible Wire, 1.5 Sq.Mm, Pink Part Noeea0025274 Model 907 , Flexible Wire, 1.5 Sq.Mm, Blue Part Noeea0025275 Model 907 , Flexible Wire, 1.5 Sq.Mm, Yellow Part Noeea0025276 Model 907 , Flexible Wire, 1.5 Sq.Mm, Green Part Noeea0025277 Model 907 , Flexible Wire, 1.5 Sq.Mm, Violet Part Noeea0025278 Model 907 , Flexible Wire, 1.5 Sq.Mm, Red Part Noeea0025279 Model 907 , Flexible Wire, 1.5 Sq.Mm, Grey Part Noeea0025280 Model 907 , Flexible Wire, 1.5 Sq.Mm, White Part Noeea0025281 Model 907 , Flexible Wire, 1.5 Sq.Mm, Black Part Noeea0025282 Model 907 , Flexible Wire, 2.5 Sq.Mm, Red Part Noeea0025283 Model 907 , Flexible Wire, 6 Sq.Mm, Red Part Noeea0025285 Model 907 , Adjustable Cable Clamp Part No912a040000170 Model 907 , Heat Sleeve (5Mm) Part Noeea0027285 Model 907 , Ring Tongue Terminal Part No625a040000148 Model 907 , By-127 Diode For P.B.Station Part Noeea0002174 Model 907 , Rubber Sheet Part Noeea0026927 Model 907 , Rubber Sheet Part Noeea0026928 Model 907 , Straight Wire Butt Connector Part Noepra040000014 Model 907 , Gland Plate Part Noeea0030650 Model 907 , Duel Head Lamp Relay(24V) Part Noeea0030031 Model 907 , 6 Pole Female Connector Part No12wl040000181 Model 907 , Terminal Part Noeea0026062 Model 907 , Hex. Nut Part Nomt05lgg Model 907 , Female Connector Housing(2 Way) Part Noeea0028691 Model 907 , Female Wedge Lock(2 Way) Part Noeea0028699 Model 907 , Male Connector Housing(2 Way) Part Noeea0028687 Model 907 , Male Wedge Lock(2 Way) Part Noeea0028695 Model 907 , Multicore Control Cable(4X1.5) Part No907a040000025 Model 907 , Hose Sleeve Part No907a050000072 Model 907 , On Delay Timer (Crouzet) Part No910a040000059 Model 907 , Twin Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030690 Model 907 , Led Work Light,45W,Low Beam Part No917a040000021 Model 907 , Led Work Light,45W,Wide Flood Part No917a040000022 Model 907 , Led Beacon Part No917a040000024 Model 907 , Led Flashing Light(Amber) Part No917a040000023 Model 907 , Led Tail Light Part No907a040000018 Model 907 , Led Work Light(15W) Part Nossla040000019 Model 907 , Paired Horn Part No919a002910934 Model 907 , Hyd. Oil Temp Sensor Part No917a040000006 Model 907 , Bracket Temp Prob. Mnt. Part No912a060000126 Model 907 , Side Mnt. Level Switch (N Part No912c040000105 Model 907 , Gasket Part No627b000000121 Model 907 , Hyd. Oil Filter Clogging Indicator Part No917a040000007 Model 907 , Capacitance Oil Level Switch(Falling) Part No917a040000026 Model 907 , Fuel Sensor(907) Part No907b040000013 Model 907 , Brake Oil Temp. Switch Part No917a040000005 Model 907 , Pressure Transmitter, 250 Bar Part No910a040000001 Model 907 , Wireless Camera Recording System Part No917b040000025 Model 907 , Wireless Camera Part No910a040000034 Model 907 , Wireless Camera Display Part No910a040000056 Model 907 , Reversing Alarm Part Noeea0022223 Model 907 , Emergency Stop Control Station Part Noeea0028455 Model 907 , Emergency Stop Marker Part Noeea0029991 Model 907 , Interior Light Part No910a040000029 Model 907 , 2 Pole Amp Connector Part Noeea0025257 Model 907 , 3 Pole Delphi Packard Connector Part Noeea0025258 Model 907 , Female Terminal-Metri Pack 150 Part Noeea0026863 Model 907 , Apc 312 Harness With Connector Part No910a040000002 Model 907 , Rd120 Harness Cum Connector Part Noeea0025260 Model 907 , Multicore Control Cable(2X1.5) Part No907a040000024 Model 907 , Multicore Control Cable(4X1.5) Part No907a040000025 Model 907 , Multicore Control Cable(7X2.5) Part No907a040000022 Model 907 , Multicore Control Cable(18X2.5) Part No907a040000023 Model 907 , Multicore Control Cable For Rc Part No912a040000157 Model 907 , Can Bus Cable Part No907a040000012 Model 907 , 6 Pole Female Sealed Connector(Dtm Series) Part Noeea0028818 Model 907 , Female Connector Housing(2 Way) Part Noeea0028691 Model 907 , Female Wedge Lock(2 Way) Part Noeea0028699 Model 907 , Male Connector Housing(2 Way) Part Noeea0028687 Model 907 , Male Wedge Lock(2 Way) Part Noeea0028695 Model 907 , Female Connector Housing(6 Way) Part Noeea0028692 Model 907 , Female Wedge Lock(6 Way) Part Noeea0028700 Model 907 , Male Connector Housing(6 Way) Part Noeea0028688 Model 907 , Male Wedge Lock(6 Way) Part Noeea0028696 Model 907 , Pin For Dt Receptacle Part Noeea0027062 Model 907 , Socket For Dt Plug Part Noeea0027064 Model 907 , Junction Box Part No907b040000026 Model 907 , Local Control Station Part No907b040000029 Model 907 , Cable Gland Pvc Hood (3/4 Et) Part Noeea0029992 Model 907 , Cable Gland Pvc Hood (1 Et) Part Noeea0029993 Model 907 , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 907 , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 907 , Positive Lock Female Terminal Part Noeea0025631 Model 907 , Cross Connection Link Assy Part Nostda038/05 Model 907 , Cross Connection Link Assy Part Nostda038/03 Model 907 , Cross Connection Link Assy Part Nostda038/02 Model 907 , Mounting Din Rail Part Noeea0022456 Model 907 , Multi-Level Terminal Part Noeea0029579 Model 907 , End Clamps Part Noeea0021276 Model 907 , Terminal End Plate Part Noeea0022455 Model 907 , Terminal Block(Black) Part Noeea0029389 Model 907 , Partition Plate Without Foot Part Noeea0030102 Model 907 , Battery,12V Part No12wl040000162 Model 907 , Battery Cut-Off Switch(Lockable) Part No910a040000033 Model 907 , Battery Switch Bracket Part No910a020000116 Model 907 , Battery Cable Assy. Pos. To Sw. Part No907b040000038 Model 907 , Battery Cable Assy Part No910a040000017 Model 907 , Battery Cable Assy. Sw. To Starter Part No907b040000039 Model 907 , Battery Cable Assy. Neg To Ground Part No907b040000040 Model 907 , Battery Cable Assy Part No910a040000020 Model 907 , Rubber Pad Part Noeea0027280 Model 907 , Rubber Pad Part Noeea0027279 Model 907 , Rubber Pad Part Noeea0027278 Model 907 , Airfilter Extension Cable Part Noeea0027658 Model 907 , Solenoid Connector(Led) Part Noeea0029713 Model 907 , Pg Cable Gland Pg13.5 Part Noeea0028456 Model 907 , Limit Switch Part No910a040000022 Model 907 , Plate Part Noeea0029957 Model 907 , Cable Gland(1/2 Npt) Part Noeea0029456 Model 907 , Roof Light Mtg. Bracket Part No907a020000019 Model 907 , Beacon Mtg. Bkt. Part No910a020000114 Model 907 , Light Mounting Bracket Part Noeea0029720 Model 907 , Guard Part Noeea0014429 Model 907 , Sleeve(10 Mm Dia) Part No19wl040000061 Model 907 , Sleeve(20 Mm Dia.) Part No19wl040000062 Model 907 , Cable Tie 3.6Mm X150mm Black Part No12wl040000035 Model 907 , Cable Tie 4.8Mm X 200 Mm Black Part No12wl040000040 Model 907 , Cab Lock Cable Ties Part No811a050000033 Model 907 , Clamp Part Noeea0028574 Model 907 , Clamp Part Noeea0007779 Model 907 , Clamp Part Noeea0007778 Model 907 , Hose Support Clamp Part Nostda037/32 Model 907 , Hose Support Clamp Part Nostda037/40 Model 907 , Hose Support Clamp Part Nostda037/76 Model 907 , Threaded Boss Part No811a020000105 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Socket Head Cap Screw M5x35 L Part No370-2146 Model 907 , Slotted Button Head Screw Part No370-5113 Model 907 , Hex Socket Head Cap Screw Part No370-2171 Model 907 , Hex Socket Head Cap Screw Part Nomt05nh16 Model 907 , Slotted Button Head Screw Part No370-5122 Model 907 , Hex. Head Screw Part Nomt05lg16g Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0238 Model 907 , Hex Head Bolt Part No370-0404 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0204 Model 907 , Hex Head Bolt Part No370-0242 Model 907 , Hex Head Bolt Part No370-0142 Model 907 , Hex Socket Head Cap Screw Part No370-2170 Model 907 , Hex Head Bolt Part No370-0140 Model 907 , Spring Washer Part Nomdw05sa Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw04sa Model 907 , Flat Washer Part Nomaw05gag Model 907 , Flat Washer Part Nomaw06ga Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Medium Washer Part Nomaw04gcg Model 907 , Hex Nut Part No369-0106 Model 907 , Hex Nut Part No369-0108 Model 907 , Cable Tags(910) Part No910b040000036 Model 907 , Hose Sleeve Part No907a050000072 Model 907 , Hose Sleeve Part No907a050000073 Model 907 , Electronic Joystick(2 Axis) Part No917b040000013 Model 907 , Deutsche 6 Pole Male Connector Part Noeea0025246 Model 907 , Deutsche 6 Pole Female Connector Part Noeea0025247 Model 907 , Controller Part No910a040000046 Model 907 , Connector Kit(Iqan-Mc42) Part No910a040000047 Model 907 , Bracket Part No917a020000051 Model 907 , Bracket Part No917a020000052 Model 907 , Plate Part Noeea0027696 Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Slotted Button Head Screw Part No370-5114 Model 907 , Hex Nut Part No369-0103 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Socket Head Cap Screw Part No370-2141 Model 907 , Battery Guard Part No907a020000052 Model 907 , Flashing Led,Red Part No912a040000216 Model 907 , Rubber Pad Part Noeea0029908 Model 907 , Yellow Sticker Kit Part No910b040000037 Model 907 , Bracket Part Noeea0031308 Model 907 , Flange Pipe Weldment Part No907b020000103 Model 907 , Expansion Bellow Part No907b050000096 Model 907 , Flange Pipe Weldment Part No907b020000100 Model 907 , Silencer Weldment Assy. Part No907b020000009 Model 907 , Flane Top Part Noeea0027144 Model 907 , Catalytic Converter With Muffler Part No917b050000121 Model 907 , Flane Bottom Part Noeea0027145 Model 907 , Flange Pipe Weldment Part No907b020000082 Model 907 , Bracket, Exhaust Part No907b020000008 Model 907 , Gasket For Exhaust Part No907a050000011 Model 907 , Gasket Part No907a050000085 Model 907 , Threaded Boss Part Noeea0027140 Model 907 , Hex Head Bolt Part No370-0611 Model 907 , Flat Washer Part Nomaw16ga Model 907 , Spring Washer Part Nomdw16sa Model 907 , Flat Washer Part Now6ga Model 907 , Flat Washer Part Now5ga Model 907 , Hex Head Bolt Part No370-0244 Model 907 , Hex Head Bolt Part No370-0250 Model 907 , Hex Nut Part No369-0108 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut Part No369-0110 Model 907 , Spring Washer Part Nomdw08sa Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Fume Diluter Group Part No907b070000072 Model 907 , Mounting Plate, Fume Diluter Part No907b020000104 Model 907 , Flange Pipe Weldment Part No907b020000105 Model 907 , Clamp Part No912b020000419 Model 907 , Exhaust Gas Diluter Part No912b050000318 Model 907 , Gasket Part Noeea0028557 Model 907 , Hex Nut Part No369-0112 Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Head Bolt Part Nostdb035-12-40 Model 907 , Hex Head Bolt Part Nostdb035-16-30 Model 907 , Hex Head Bolt Part Not7gg20 Model 907 , Spring Washer. Part Now7gf Model 907 , Fibre Glass Tape Part No910a050000031 Model 907 , Fiber Glass Wool Part No907a050000045 Model 907 , Galvanise Wire Part Noeea0027482 Model 907 , Heat Insulation Jacket Part No907a050000100 Model 907 , Cooler Guard Part No907b020000106 Model 907 , Grill Part No907b070000075 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Hex Nut Part No369-0108 Model 907 , Hex Head Bolt Part No370-0248 Model 907 , Hex Head Bolt Part No370-0250 Model 907 , Support Bracket Part No907b020000037 Model 907 , Support Bracket Part No907a020000038 Model 907 , Support Bracket Part No907a020000039 Model 907 , Support Bracket Part No907a020000107 Model 907 , Support Bracket Part No907a020000108 Model 907 , Support Bracket Part No907a020000119 Model 907 , Support Bracket Part No917a020000021 Model 907 , Cover Part No907a020000004 Model 907 , Cover, Air Intake Part No907a020000057 Model 907 , Cover Part No907a020000109 Model 907 , Cover Part No907a020000110 Model 907 , Guard Plate Part No907a020000114 Model 907 , Guard Plate Part No907a020000115 Model 907 , Plate Part No907a020000116 Model 907 , Cover Part No907b020000036 Model 907 , Cover Part No907b020000111 Model 907 , Cover Part No907b020000112 Model 907 , Cover Part No907b020000113 Model 907 , Cover Part No917a020000038 Model 907 , Cover Part No917a020000039 Model 907 , Clamp Part Noeea0007778b Model 907 , Flat Washer Part Nomaw12ga Model 907 , Cover Part No917a020000041 Model 907 , Cover Part No917a020000042 Model 907 , Exhaust Cover Assy. Part No907b070000074 Model 907 , Exhaust Cover Part No907a020000117 Model 907 , Exhaust Cover Part No907a020000118 Model 907 , Cover Plate Part Noeea0033191 Model 907 , Cover Plate Part Noeeb0033187 Model 907 , Plate Part Noeea0033188 Model 907 , Plate Part Noeea0033189 Model 907 , Threaded Boss(M10x15lg) Part Noeea0016870 Model 907 , Hex Head Bolt Part No370-0206 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Flat Washer Part Nomaw06ga Model 907 , Flat Washer Part Nomaw08ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Stopper Part No917a020000040 Model 907 , Hand Rest Seat Part No907a050000069 Model 907 , Hex Nut Part No369-0108 Model 907 , Avm Part No907a050000092 Model 907 , Threaded Boss Part Noeea0003462 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Flat Washer Part Nomaw16ga Model 907 , Flat Washer Part Nomaw20ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw16sa Model 907 , Spring Washer Part Nomdw20sa Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Nut Part No369-0112 Model 907 , Hex Nut Part No369-0116 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Hex Head Bolt Part No370-0316 Model 907 , Hex Head Bolt Part No370-0404 Model 907 , Hex Head Bolt Part No370-0406 Model 907 , Hex Head Bolt Part No370-0412 Model 907 , Hex Head Bolt Part No370-0606 Model 907 , Hex Head Bolt Part No370-0609 Model 907 , Hex Head Bolt Part No370-0613 Model 907 , Hex Head Bolt Part No370-0809 Model 907 , Cover, Fuel Tank Part No910a020000239 Model 907 , Gasket Part No910a050000068 Model 907 , Hex Head Bolt Part Nostdb035-12-30 Model 907 , Battery Box Part No907b020000125 Model 907 , Cover,Battery Part No910a020000213 Model 907 , Clamp, Battery Part Noeea0031720 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part Nostdb035-10-20 Model 907 , Hex Head Bolt Part Nostdb035-10-30 Model 907 , Hex Nut Part No369-0110 Model 907 , Threaded Boss Part Noeea0007149 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0403 Model 907 , Cover Part No811b020000150 Model 907 , Gasket Part No811b050000067 Model 907 , Conveyor Assy. Part No907a070000080 Model 907 , Threaded Boss Part Noeea0007149 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Bracket Part No907a070000081 Model 907 , Bracket Part No907b020000124 Model 907 , Name Plate (Fuel) Part No912a050000001 Model 907 , Name Plate (Hyd. Oil) Part No912a050000003 Model 907 , Name Plate (M/C Sr. No) Part No100618 Model 907 , Warning Plate(Do Not Stand Here) Part No016b000091012 Model 907 , Name Plate, Model Part No907a050000009 Model 907 , Decal, Tire Pres. Part No246918 Model 907 , Name Plate, Pressure Reading Part No907a050000077 Model 907 , Name Plate,Caution Safety Link Part Noxa1365 Model 907 , Name Plate, Joy Stick Operation Part No907a050000078 Model 907 , Warning Plate - Caution Crush Hazard Part No822a050000034 Model 907 , Hydraulic Oil - Identification Plate Part No822a050000035 Model 907 , Lubrication Plate Part No907a050000010 Model 907 , Voltage Indicator Plate Part No822a050000037 Model 907 , Warning Plate Part No917a050000040 Model 907 , Warning Plate - Danger Area Part No822a050000039 Model 907 , Name Plate - Steering Operation Part No822a050000040 Model 907 , Name Plate - Operator Control Part No822a050000041 Model 907 , Brake Hyd. Oil Identification Plate Part No917a050000044 Model 907 , Warning Plate- Do Not Touch Part No917a050000045 Model 907 , Name Plate-Pressure Check Points Part No917a050000083 Model 907 , Name Plate, Emergency Steering Part No907a050000076 Model 907 , Name Plate, Air Filter Part No907a050000058 Model 907 , Name Plate, Park Brake Release Part No907a050000059 Model 907 , Name Plate, Engine Start Stop Part No907a050000060 Model 907 , Name Plate, Weld Instruction Part No907a050000061 Model 907 , Name Plate, Battery Switch Part No907a050000062 Model 907 , Air Intake Kit Part No907b050000013 Model 907 , Air Cleaner Assy Part Noeea0027315 Model 907 , Hose Part Noeea0027316 Model 907 , Hose Clamp, T Bolt Part Noeea0027317 Model 907 , Precleaner, Metal Part Noeea0027318 Model 907 , Bracket Mounting Assy Part Noeea0027319 Model 907 , Bracket Mounting, Powder Coated Part Noeea0027320 Model 907 , Rain Hood, Metal Part Noeea0027321 Model 907 , Hose Elbow Part Noeea0027322 Model 907 , Hose Clamp, T Bolt Part Noeea0027323 Model 907 , Pipe Assy, Powder Coated Part Noeea0027324 Model 907 , Hose Part Noeea0027325 Model 907 , Pipe Assy, Powder Coated Part Noeea0027326 Model 907 , Bracket Assy Part Noeea0027327 Model 907 , Restriction Indicator Part Noeea0027328 Model 907 , Hose Clamp T-Bolt Part Noeea0029203 Model 907 , Hose Reducer Part Noeea0029205 Model 907 , Bracket, Air Cleaner Part No907a020000025 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Flat Washer Part Nomaw10ga Model 907 , Hex Nut Part No369-0110 Model 907 , Adapter Part No907a050000020 Model 907 , Bracket, Air Filter Part Noeea0027682 Model 907 , Th. Boss Part Noeea0027216 Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Filter Element, Primary Part Noeea0027698 Model 907 , Filter Element, Safety Part Noeea0027699 Model 907 , Tool Kit Part No907a070000017 Model 907 , Axle Oil Part No12wl050000144 Model 907 , Lithium Base Grease Part Noxa1417 Model 907 , Fire Extinguisher Part No625a050000110 Model 907 , Drive Screw Part Not1000 Model 907 , Engine Oil Part No907a050000006 Model 907 , Fastner Sealant Part No00ea000001155 Model 907 , Hydraulic Oil Part Nod10a050000093 Model 907 , Brake Oil Part No917a050000049 Model 907 , Centralised Lubrication System (Automatic) Part No917b050000022 Model 907 , Engine Coolant Part No907a050000007 Model 907 , Front Reflector Part No12wl040000125 Model 907 , Rear Reflector Part No12wl040000126 Model 907 , Reflective Tape (Red) Part No19wl050000631 Model 907 , Reflective Tape (White) Part No19wl050000630 Model 907 , Reflective Tape (Yellow) Part No19wl050000632 Model 907 , O Ring Kit Part No917a050000113 Model 907 , Automatic Fire Suprression System Part No907a070000027 Model 907 , Automatic Fire Detection & Supression System Part No19wl050000868 Model 907 , Bracket (Fire System) Part No19wl020000733 Model 907 , Threaded Boss Part No811a020000105 Model 907 , Hex Head Screw Part Nomt08lg16g Model 907 , Spring Washer Part Nomdw08sag Model 907 , Hex Nut Part Nomt08lgg Model 907 , Flat Washer Part Nomaw08gag Model 907 , Accumulator Charging Kit Part No811a050000124 Model 907 , Hand Pump Part No907a050000048 Model 907 , Hand Pump Part No917a050000106 Model 907 , Single Core Wire Rubber Bidding Part Nod06a050000189 Model 907 , Logo-Eimco Elecon(Engine Hood) Part No12wl050000047 Model 907 , Wheel Choke Part No910a050000034 Model 907 , E.M Tyre Inflating & Checking Device Lb Part No907a050000064 Model 907 , Engine Cooler Group Part No907b070000070 Model 907 , Cac Cooler Assy. Part No907b070000071 Model 907 , Cac With Radiator Part No907b050000094 Model 907 , Cac Cooler Mtg. Bracket Part No907b020000092 Model 907 , Hex Head Bolt Part Nostdb035-16-35 Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Head Bolt Part Nostdb035-10-35 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Flat Washer Part Nomaw10gab Model 907 , Cac Tube, Inlet Part No907b020000093 Model 907 , Cac Silicone Hose Part No907a050000028 Model 907 , T-Bolt Hose Clamp Part No907a050000034 Model 907 , Cac Tube, Outlet Part No907b020000094 Model 907 , Elbow,Cac Part No910a050000074 Model 907 , Radiator Tube, Inlet Part No907b020000095 Model 907 , Silicone Hose, Coolant Part No907a050000029 Model 907 , Silicone Hose, Coolant Part Noeea0027283 Model 907 , T-Bolt Hose Clamp Part No907a050000032 Model 907 , Silicone Hose, Coolant Part No907a050000030 Model 907 , Silicone Hose, Coolant Part Noeea0027284 Model 907 , T-Bolt Hose Clamp Part No907a050000033 Model 907 , Radiator Tube, Outlet Part No907b020000096 Model 907 , Elbow Hose, Coolant Part No907a050000031 Model 907 , Coolant Hose Part Noeea0027289/006 Model 907 , Hose Clamp Part Nop9phb Model 907 , Coolant Hose Part Noeea0027287/004 Model 907 , Hose Clamp (Fuel Circuit) Part No12wl050000172 Model 907 , Nipple Part No907a020000024 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Coolant Hose Part Noeea0027287/001 Model 907 , Coolant Hose Part Noeea0027287/006 Model 907 , Hex Head Plug (Bsp) Part Nosc036/004 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Hex Head Plug (Bsp) Part Nosc036/008 Model 907 , T-Bolt ( Hose-Clamp) (Heavey Duty) Part No19wl050000052 Model 907 , Hex Head Plug (Bsp) Part Nosc036/002 Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Sponge (Side) Part No12wl050000123 Model 907 , Rubber Sheet Part Noeea0032933 Model 907 , Ball Valve(G 1/2) Part Norb2c050000137 Model 907 , Hose Assembly Part No623d02584/113 Model 907 , St.Swivel Adaptor M/F Part Nose012/064 Model 907 , Straight Adaptor, M/M Part Nose012/084 Model 907 , Tank Mounting Bracket Part No910b020000254 Model 907 , Threaded Boss (M12) Part Noeea0002561 Model 907 , Threaded Boss Part Noeea0033008 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Th. Boss Part Noeea0027216 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Elbow, Coolant Tube Part No910b020000178 Model 907 , Bush (Metric) Part Nombh100/116/50A Model 907 , Bush,Metric Part Nombh100/116/70A Model 907 , Bush (Metric) Part Nombh90/106/100A Model 907 , Pin Part No917a060000009 Model 907 , Bush (Metric) Part Nombh90/106/60A Model 907 , Pin Part No917a060000015 Model 907 , Pin Part No917a060000012 Model 907 , Spherical Bearing Part Nostdc003/056 Model 907 , Seal Part Noseg251 Model 907 , O Ring Part Noseg1099 Model 907 , Wear Washer Part No912b060000117 Model 907 , Counter Balance Valve Part Noeea0027160 Model 907 , Valve Seal Kit Part Noeea0028796 Model 907 , Counter Balance Valve Part Noeea0027167 Model 907 , Valve Seal Kit Part Noeea0028811 Model 907 , Spherical Bearing Part Noeea0022799 Model 907 , Avm, Engine Part No910a050000025 Model 907 , Avm, Engine Part No19wl050000865 Model 907 , Spider Assembly (7C) Part No912a050000208 Model 907 , Radial Seal Ring Part Noeea0027541 Model 907 , Radial Seal Ring Part Noeea0027555 Model 907 , Spider Assy. - 6C Part No907a050000050 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Pres.Gauge Isolator Valve Part No811a050000013 Model 907 , Drive Oil Pressure Gauge Part No813b000000182 Model 907 , Oil Pressure Gauge Part No917b050000080 Model 907 , Hydraulic Motor Part Noeea0027907 Model 907 , Fan Part Noeea0027905 Model 907 , Lip Seal Part Noeea0028877 Model 907 , Selector Switch (2 Pos.) Part No910a040000013 Model 907 , Joystick Handle(Walvoil) Part No12wl040000189 Model 907 , Temperature Sensor Part Noeea0027843 Model 907 , Sensor Part Noeea0027837 Model 907 , Sensor Part Noeea0027819 Model 907 , V-Ribbed Belt Part Noeea0027827 Model 907 , Accelerator Pedal Part Noeea0027831 Model 907 , Cab Control Part Noeea0025805 Model 907 , Transmission Temp. Sensor(917) Part Noeea0026850 Model 907 , Transmission Pressure Sensor(917 Part Noeea0026851 Model 907 , Hyd. Motor - Cr Part No611b050000321 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Gauge Adaptor Part No811a060000088 Model 907 , Oil Filter Kit Part No907a050000055 Model 907 , Bonded Seal Part Nosc011/006 Model 907 , Fuel Filter Insert Part No907a050000052 Model 907 , Fuel Filter Part No907a050000053 Model 907 , Fuel Filter Insert Part No907a050000054 Model 907 , Minimess Coupling Part No822a050000031 Model 907 , Service Control Valve Part No917b050000015 Model 907 , Repair Kit (Accumulator Charge Valve) Part Noeea0025349 Model 907 , Twin Oil Cooler Part No917b050000021 Model 907 , Power Relay(24V) Part No19wl040000115 Model 907 , Base For Change Over Relay Part No12wl040000024 Model 907 , Fuel Tank Cap With Neck Part No907a050000068 Model 907 , Suspension Tube Type-A Part Noclsa020000034 Model 907 , Cac With Radiator Part No907b050000023 Model 907 , Radiator Cooler Matrix(115Kw) Part Noeea0027908 Model 907 , Seal Kit Part Noeea0029259 Model 907 , Transmission Control Unit(Econ.A312) Part Noeea0028730 Model 907 , Tcu Harness (Apc - 312) Part Noeea0033374 Model 907 , Cooler Fan, Sucker Part No907b050000095 Model 907 , Smart Relay Part Noeea0035781c Model 907 , Bearing Shell Part Noeea0037186c Model 907 , Cylinder Head Gasket Part Noeea0031824 Model 907 , Gasket Part Noeea0031839 Model 907 , Injector Part Noeea0031872 Model 907 , Valve Cover Gasket Part Noeea0027749 Model 907 , Flange Screw Part Noeea0037183c Model 907 , Flange Screw Part Noeea0037184c Model 907 , Waste Gate Solenoid Valve Part Noeea0029451 Model 907 , Coil Part Noeea0026837 Model 907 , Up To 1000 Hrs Filter Kit Part No907a070000088 Model 907 , Oil Filter Part Noeea0035443c Model 907 , Cylinder Head Part Noeea0035983c Model 907 , Cylinder Liner Kit Part Noeea0031825 Model 907 , Gasket Part Noeea0031828 Model 907 , Plane Gasket Part Noeea0031853 Model 907 , Ecu (Without Software) Part Noeea0032212 Model 907 , Piston Part No201c000000054 Model 21 , Comp. Ring Part No201a000000072 Model 21 , Oil Ring Part No201a000000073 Model 21 , Connecting Rod Part No201e000000053 Model 21 , Retaining Ring Part No201a000000048 Model 21 , Bushing Part No201a000000049 Model 21 , Hex Head Bolt Part Not8hg24 Model 21 , Crank Sleeve Part No201b000000759 Model 21 , Crank Shaft Part No201m000000087 Model 21 , Bearing Part Nog201 Model 21 , Vent Cap Assy Part No200m000000084 Model 21 , Valve And Housing Group Part No201m000000110 Model 21 , Valve Housing Cover Part No201b000000066 Model 21 , Valve Housing Gasket Part No201a000000065 Model 21 , Gasket For Motor Housing Part No021a000000196 Model 21 , Wrist Pin Assembly Part No201m000000086 Model 21 , Hex Head Bolt Part Not8gg16 Model 21 , Cylinder Part No201c000000744 Model 21 , Cylinder Gasket Part No201a000000064 Model 21 , Gasket Set Part No201m000000637 Model 21 , Valve Housing Part No201m000000090 Model 21 , Gasket,Cover Part No021d000000182 Model 21 , Seal Part Nos1301 Model 21 , Shim Set Part Noga62a Model 21 , Axle Bearing Cap Part No021c000000181 Model 21 , Motor Pinion Part No021b000000198 Model 21 , Motor Pinion Spacer Part No021a000000197 Model 21 , Bearing Part Nog132 Model 21 , Motor Pinion Assy Part No021m000000114 Model 21 , Clutch Group Part No021m000003075 Model 21 , Clutch Shaft Assy Part No021m000003076 Model 21 , Bearing Part Nog135 Model 21 , Clucth Thrust Washer Part No021a000003082 Model 21 , Clucth Coller Assy Part No021m000000148 Model 21 , Clutch Jaw Part No021b000003081 Model 21 , Key Part Nokwt Model 21 , Clutch Pinion Assy. Part No021m000003078 Model 21 , Clucth Gear Part No021c000003080 Model 21 , Clutch Rod Part No012a000000029 Model 21 , Spring Part Noza63 Model 21 , Seal Rod Part No021a000000030 Model 21 , Shim Set Part Nogb32a Model 21 , Lower Deck Intermediate G Part No021m000000115 Model 21 , Lower Deck Intermediate Part No021m000000116 Model 21 , L.D.Gear Part No021b000000016 Model 21 , Key Part Nokwv Model 21 , L.D.Int.Pinion Part No021b000000035 Model 21 , Lower Deck Idler Group Part No021m000000117 Model 21 , Lower Deck Idler Shaft As Part No021m000000118 Model 21 , Bearing Part Nog140 Model 21 , Shaft-L.D.Gear Part No021b000000036 Model 21 , L.D.Idler Gear Part No021b000000017 Model 21 , Axle Gear Part No021b000000178 Model 21 , Key Part Nokw36 Model 21 , Axle Guage - 610 Mm Part No021a000000211 Model 21 , King Bolt Type B Part No021m000000160 Model 21 , Centering Roller Group Part No021m000001708 Model 21 , Hex Nut, Slotted Part Not16gv Model 21 , Roller Assy Part No024m000000819 Model 21 , Anchor Roller Centering Part No021b000001707 Model 21 , Ball Race,Ud Part No021c000000150 Model 21 , Balls Part Nogr16 Model 21 , Ball Race,Ld Part No021c000000151 Model 21 , Ud Gr Housing Covr Gasket Part No021c000000042 Model 21 , Upper Deck Idler Shaft Assy. Part No021m000000123 Model 21 , Upper Deck Idler Shaft Part No021a000000037 Model 21 , U.D.Idler Gear Part No021b000000018 Model 21 , Upper Deck Intermediate G Part No021m000000124 Model 21 , Upper Deck Inter. Shaft A Part No021m000000125 Model 21 , Gear Part No021b000000019 Model 21 , Woodruff Key Part Nokw29 Model 21 , U.D.Int.Shaft & Pinion Part No021a000000038 Model 21 , Bearing Part Nog138 Model 21 , Chain Reel Group Part No021m000000126 Model 21 , Chain Reel Shaft Assy Part No021m000000127 Model 21 , Chain Reel Gear Part No021b000000020 Model 21 , Chain Reel Shaft Part No021b000000039 Model 21 , Key Part Nokw34 Model 21 , Bearing Part Nog144 Model 21 , Bearing Part Nog145 Model 21 , Seal Part Nos265 Model 21 , Chain Reel Part No021c000000014 Model 21 , Chain Link Pin Part No012a000000041 Model 21 , Spring Washer Part Now6gf Model 21 , Chain Roller Assy Part No021m000000132 Model 21 , Hex Nut Part Not24gg Model 21 , Chain Roller Shaft Part No021b000000052 Model 21 , Roller, Bucket Chain Part No021a000000053 Model 21 , Lock Washer Part Nol49 Model 21 , Lock Nut Part Nol819 Model 21 , Bearing Part Nog121 Model 21 , Grease Nipple Part Nobp1fg Model 21 , Linkage Pin Cen.Drum Levr Part No021a000000046 Model 21 , Bush,Centring Drum Linkage Part No021a000000045 Model 21 , Hex Nut Part Not20gg Model 21 , Centering Drum Lever Part No021c000000043 Model 21 , Seal Part Nos219 Model 21 , Bearing Cup Part Nog510 Model 21 , Bearing Cone Part Nog511 Model 21 , Shim Set Part Nogb80a Model 21 , Hex Head Bolt Part Not10gg24 Model 21 , Centering Drum Cover Gasket Part No021a000000051 Model 21 , Hex Nut Part Not18gg Model 21 , Spring Washer Part Now18gf Model 21 , Thrust Stop Part No021b000000068 Model 21 , Bumper Spring Clamp Part No021a000000070 Model 21 , Bumper Spring Part No021a050000003 Model 21 , Spring Washer Part Now8gf Model 21 , Hex Nut Part Not8gg Model 21 , Hex Head Bolt Part Not6gg32 Model 21 , Spring Part No012a000000085 Model 21 , Bucket Handle Part No012d000000084 Model 21 , Traction Valve Lever Part No012b000000093 Model 21 , Balance Spring Part No012a000000094 Model 21 , Spring Washer Part Now5gf Model 21 , Hex Nut Part Not5hg Model 21 , Hex Head Bolt Part Not6gg24 Model 21 , Handle Assy Part No012m000000141 Model 21 , Traction Control Handle Part No012b000000096 Model 21 , Traction Handle Retainer Part No012b000000099 Model 21 , Traction Pivot Bushing Part No012a000000097 Model 21 , Shim Set Part Noga31a Model 21 , Pivot Handle Part No012a000000098 Model 21 , Traction Bonnet Group Part No012m000000140 Model 21 , Traction Valve Bonnet Part No012c000000090 Model 21 , Gasket Part Nosga30 Model 21 , Valve Stem Part No012a000000088 Model 21 , Traction Valve Disc Part No012b000000086 Model 21 , Valve Disc Spring Part No012a000000081 Model 21 , Bucket Bonnet Group Part No021m000000139 Model 21 , Valve Stem Part No012a000000082 Model 21 , Bucket Valve Disc Part No012c000000079 Model 21 , Swivel Sleeve Assy Part No012m000000138 Model 21 , Air Screen Part No012a000000076 Model 21 , Swivel Gasket Part No012a000000077 Model 21 , Drain Cock Part Nobp3rvd Model 21 , Gasket Part Nosga36 Model 21 , Bonnet Part No021d000000080 Model 21 , Grease Nipple Part Nobp1fg Model 21 , Hex Nut Part Not8gg Model 21 , Traction Air Hose Assy Part No021m000000270 Model 21 , Hex Nut, Nyloc Part Nol211 Model 21 , Flat Washer Part Now12ga Model 21 , Cable Spring Part No021a000000297 Model 21 , Rocker Arm Cable Long Part No021b000000290 Model 21 , Rocker Arm Cable Short Part No021b000000295 Model 21 , End Link Pin Part No021a000000040 Model 21 , Split Pin Part Nol119 Model 21 , End Link Part No021a000000057 Model 21 , Bucket Chain Assy Part No021m000000134 Model 21 , Chain Repair Kit Part No021m000000939 Model 21 , Bucket Bottom,Casting Part No021a030000011 Model 21 , Bucket Assy.(Type48) Part No021m000002620 Model 21 , Air Motor Assy. Part No201m000000091 Model 21 , Piston Group Assy Part No201m000000085 Model 21 , Crank Shaft Group Part No201m000000088 Model 21 , Plain Crankshaft Assembly Part No201m000000760 Model 21 , Rotary Valve Assembly Part No201m000000089 Model 21 , Axle Cap (18-30 Ga.) Part No021m000000253 Model 21 , L.D. Motor Pinion Part No150b060000001 Model 150 , Spacer Part No012a000000197 Model 150 , Bearing Part Nog130 Model 150 , L.D. Pinion Part No150b060000002 Model 150 , Bearing Part Nog132 Model 150 , Gear Part No021c000003080 Model 150 , Woodruff Key Part Nokw29 Model 150 , Gear Part No021b000000016 Model 150 , Bearing Part Nog135 Model 150 , Gear Part No150b060000005 Model 150 , Axle Cap Part No021c000000181 Model 150 , Shim Set Part Noga62a Model 150 , Seal Part Nos1301 Model 150 , Hub Part No150c060000009 Model 150 , Wheel Tyre Assy. Part No150m100000004 Model 150 , Key Part Nok12r66 Model 150 , Drain Cock Part Nobp2rve Model 150 , Hex Head Bolt Part Not10gg24 Model 150 , Washer Part Now10gf Model 150 , Key Part Nokwt Model 150 , Bolt Part Not8gsk8 Model 150 , Bolt Part Not10gg28 Model 150 , Axle Nut Part No021a000000185 Model 150 , Washer Part No021a000000184 Model 150 , Wheel Stud Part No802a000000708 Model 150 , Wheel Nut Part No802a000000709 Model 150 , Wheel Nut Part Nol262t Model 150 , Gasket Part No012a000000196 Model 150 , Washer Part Now6gf Model 150 , Cap Screw Part Not6gg28 Model 150 , Cap Screw Part Not6gg24 Model 150 , Gasket Part No200a000000065 Model 150 , Valve Housing Cover Part No200a000000066 Model 150 , Cap Screw Part Not6gg64 Model 150 , Cap Screw Part Not6gg14 Model 150 , Gasket Part No200a000000064 Model 150 , Cylinder Part No200c000000050 Model 150 , Washer Part No200a000000099 Model 150 , Cap Screw Part Not7gg16 Model 150 , Wrist Pin Part No200m000000086 Model 150 , Oil Ring Part No200a000000073 Model 150 , Comp. Ring Part No200a000000072 Model 150 , Piston Part No200c000000054 Model 150 , Connecting Rod Part No200d000000053 Model 150 , Connecting Rod Bushing Part No200a000000049 Model 150 , Retainer Ring Part No200a000000048 Model 150 , Bearing Part Nog200 Model 150 , Valve Housing Assy Part No200m000000090 Model 150 , Rotary Valve Assy Part No200m000000089 Model 150 , Air Motor Part No270m000000006 Model 150 , Bearing Part Nog107 Model 150 , Bush Part No150a060000011 Model 150 , U D Idler Gear Part No012b000000018 Model 150 , Pinion Part No012a000000038 Model 150 , U D Intetmediate Gear Part No012b000000019 Model 150 , Chain Reel Shaft Part No012b000000039 Model 150 , Bearing Part Nog138 Model 150 , Chain Reel Gear Part No012b000000020 Model 150 , Bearing Part Nog142 Model 150 , Chain Reel Part No150c030000001 Model 150 , Seal Part Nos197 Model 150 , Chain Link Pin Part No012a000000041 Model 150 , Gasket Part No012b000000042 Model 150 , Shim Set Part Noga16ax Model 150 , Chain Roller Shaft Part No630b000000081 Model 150 , Roller Part No630c000000083 Model 150 , Chain Assy. Part No021m000000133 Model 150 , End Link Pin Part No021a000000040 Model 150 , Cotter Pin Part Nol119 Model 150 , End Link Part No021a000000057 Model 150 , Spring Part No012a000000069 Model 150 , Bolt Part Not6gg16 Model 150 , Bolt Part Not8gg24 Model 150 , Washer Part Now8gf Model 150 , Bolt Part Not10gg20 Model 150 , Bolt Part Not12gg48 Model 150 , Bolt Part Not12gg20 Model 150 , Washer Part Now12gf Model 150 , Washer Part Now20gf Model 150 , Cap Screw Part Not8gg20 Model 150 , Gasket Part Nosga32a Model 150 , Seal Part Nos2300 Model 150 , Cap Screw Part Not6ggw16 Model 150 , Cap Screw Part Not6gg20 Model 150 , Bearing Part Nog280 Model 150 , Crank Shaft Part No200m000000517 Model 150 , Rotary Valve Part No270d000000002 Model 150 , Valve Housing Part No270d000000003 Model 150 , Bearing Part Nog2003 Model 150 , Bearing Part Nog2004 Model 150 , Bucket Part No150e020000094 Model 150 , Bucket Lip Part Noeea0004865 Model 150 , Seal Part Nos300 Model 150 , Bush Part Noibh48/56/48A Model 150 , Cap Screw Part Not8gh24 Model 150 , Nut Part Not10gg Model 150 , Flat Washer Part Now24gab Model 150 , Connecting Link Part No150b020000022 Model 150 , Bolt Part Not4gg8 Model 150 , Locking Plate Part Nosc009/003 Model 150 , Locking Plate Part Nosc009/002 Model 150 , Pin Part No150a060000016 Model 150 , Spring Bush Part Noibh24/32/16A Model 150 , Nut Part Not8gg Model 150 , Pin Part No150a060000015 Model 150 , Bolt Part Not4gg16 Model 150 , Lock Washer Part Now4gf Model 150 , Bolt Part Not12gg28 Model 150 , Nut Part Not12gg Model 150 , Pneumatic Cyl. Part No150b050000043 Model 150 , Pin Part No150a060000014 Model 150 , Seal Kit ( Suitable For # 150M10000005) Part Noeea0000690 Model 150 , Nipple Part Nobp8fna Model 150 , Union Elbow Part Nobp8bsl Model 150 , Adaptor Part Nose012/085 Model 150 , Manifold Part No150b020000028 Model 150 , Elbow Part Nose012/026 Model 150 , Adaptor Part Nose012/086 Model 150 , Adaptor Part Nose012/007 Model 150 , Elbow Part Nobp6bl Model 150 , Pipe Part Nobp6fn28 Model 150 , Elbow Part Nobp6bl Model 150 , Pipe Part Nobp6fn40 Model 150 , Hose Assy Part No623d02584/230 Model 150 , Adaptor Part Nose012/006 Model 150 , Adaptor Part Nose012/097 Model 150 , Elbow Part Nose012/027 Model 150 , Hose Assy Part No623d02584/238 Model 150 , Hose Assy Part No623d02584/242 Model 150 , Allen Bolt Part No370-2235 Model 150 , Washer Part Nomdw08sa Model 150 , Nut Part No369-0108 Model 150 , Bolt Part No370-0264 Model 150 , Adaptor Part Nose012/046 Model 150 , Adaptor Part Nose012/066 Model 150 , Union Part Nobp6bs Model 150 , Hose Clip Part Nop9phb Model 150 , Pn.Control Valve(1/2Bsp) Part Noeeb0010031 Model 150 , Gear Part No150c060000019 Model 150 , Side Ring Part No802b060000003 Model 150 , Locking Ring Part No802b060000002 Model 150 , Seal Part Nos115 Model 150 , Motor Pinion Part No150b060000018 Model 150 , Retaining Ring Part Nol1118 Model 150 , Circlip Part Nol1166 Model 150 , Gasket Part Nosga24a Model 150 , Gasket Part No150b050000024 Model 150 , Gasket Part No150b050000025 Model 150 , Motor Pinion Part No150b060000031 Model 150 , Spacer Part No150a060000032 Model 150 , Shaft Part No150a060000035 Model 150 , Pinion Part No150b060000033 Model 150 , Bearing Part No150a050000029 Model 150 , Gear Part No150b060000034 Model 150 , Key Part Nomk64r40 Model 150 , Key Part Nomk75r56 Model 150 , Shim Set Part No150a050000026 Model 150 , Pinion Part No150b060000037 Model 150 , Gear Part No150b060000038 Model 150 , Shaft Part No150a060000040 Model 150 , Bearing Housing Part No150b060000036 Model 150 , Gear Part No150b060000041 Model 150 , Axle Part No150c060000043 Model 150 , Gear Part No150b060000044 Model 150 , Spacer Part No150a060000042 Model 150 , Bearing Part No150a050000030 Model 150 , Seal Part Noseg242 Model 150 , Shim Set Part No150a050000027 Model 150 , Hub Part No150c060000054 Model 150 , Wheel Rim Assy Part No150d050000021 Model 150 , Tube Part No802a050000002 Model 150 , Flap Part No802a050000003 Model 150 , Bkt.Chain Roller Part No021a000000053 Model 150 , Pin Part No150b060000060 Model 150 , Spacer Part No150a060000062 Model 150 , Bearing Part Nog121 Model 150 , Gasket Part No150b050000023 Model 150 , Motor Pinion Part No150b060000047 Model 150 , Spacer Part No150a060000061 Model 150 , Seal Part Noseg170 Model 150 , Shaft Part No150a060000049 Model 150 , Gear Part No150b060000048 Model 150 , Pinion Part No150b060000051 Model 150 , Key Part Nomk60r45 Model 150 , Gear Part No150b060000050 Model 150 , Chain Reel Shaft Part No150b060000053 Model 150 , Seal Part Noseg203 Model 150 , Gear Part No150b060000052 Model 150 , Key Part Nomk66r63 Model 150 , Bumper Spring Part No150a050000022 Model 150 , Cylinder Part No150b020000108 Model 150 , Pin Part No150a060000056 Model 150 , Lock Plate Part No150a020000112 Model 150 , Keeper Plate Part Nolka24a Model 150 , Bearing Part No150a050000028 Model 150 , Circlip Part No912a050000006 Model 150 , Pin Part No150b060000058 Model 150 , Spacer Part No150a060000057 Model 150 , Chain Assy Part No150b070000021 Model 150 , Bumper Spring Clamp Part No021a000000070 Model 150 , Pin Part Nomkd25a66 Model 150 , Bush Part Noibh32/40/32A Model 150 , Spacer Part No150a020000047 Model 150 , Spring Part No824a000000277 Model 150 , Spacer Part Nogsa8d Model 150 , Gasket Part No824b000000215 Model 150 , Bush Part Nosd001/014 Model 150 , Link Part No623a000003189 Model 150 , Link Part No623a000003190 Model 150 , Pin Part No623a000003191 Model 150 , Pin Part No623a000003856 Model 150 , Hose Assy Part Nostdd018/108 Model 150 , Hose Assy Part Nostdd018/223 Model 150 , Hose Assy Part Nostdd018/226 Model 150 , Hose Assy Part Nostdd018/246 Model 150 , Hose Assy Part Nostdd018/250 Model 150 , Wheel Stud Part No150a060000064 Model 150 , Wheel Nut Part No150a060000065 Model 150 , Lock Nut Part No803b000000488 Model 150 , Collar Assy Part No00eb000000037 Model 150 , Arm (L H) Part No150d020000099 Model 150 , Arm (R H) Part No150d020000100 Model 150 , Lock Nut Part Nol274 Model 150 , Pn.Control Valve(1/2Bsp) Part Noeeb0010031 Model 150 , Motor Pinion Part No150b060000039 Model 150 , Cover, Lower Deck Gear Bo Part No150b020000113 Model 150 New , Cover,L.D.Gear Box Part No150b020000114 Model 150 New , Bearing Housing Part No150b060000046 Model 150 New , Bearing Housing Part No150b060000045 Model 150 New , Air Motor Arrangement Part No270m100000004 Model 150 New , Valve Housing Group Part No270m000000194 Model 150 New , Complete Crankshaft Group Part No200m000000530 Model 150 New , Piston Group Part No200m000000085 Model 150 New , Motor Housing Assembly Part No270m000000007 Model 150 New , Crank Sleeve Part No200b000000047 Model 150 New , Upper Deck Part No150d020000102 Model 150 New , Upper Deck Gear Box Part No150d020000101 Model 150 New , Gear Box Part No150d020000098 Model 150 New , Hopper Assy Part No150b070000074 Model 150 New , Hopper Support Bracket Part No150d020000110 Model 150 New , Upper Deck Gbox Assy. Part No150m100000055 Model 150 New , Guard, Upper Deck Part No150b020000049 Model 150 New , Hopper-Lh Part No150b020000136 Model 150 New , Hopper-Rh Part No150b020000137 Model 150 New , Hopper Door Part No150b020000134 Model 150 New , Side Plate,Rh Part No150b020000052 Model 150 New , Side Plate,Lh Part No150b020000053 Model 150 New , Shaft Part No803b000000004 Model 824 , Gear (Model 824) Part No803b000000182 Model 824 , Key Part Nok58r40 Model 824 , Motor Pinion Spacer Part No021a000000197 Model 824 , Tab Washer Part No803a000000441 Model 824 , Gear Part No803b000000183 Model 824 , Bearing Part Nog140 Model 824 , Shaft Part No803b000000007 Model 824 , Gear Part No803b000000008 Model 824 , Bearing Part Nog142 Model 824 , Key Part Nok60r40 Model 824 , Gear Part No803b000000010 Model 824 , Bearing Part Nog144 Model 824 , Shaft Part No803b000000011 Model 824 , Gasket Part No803a000000223 Model 824 , Bearing Part Nog138 Model 824 , Key Part Nok12r66 Model 824 , Hex Socket Set Screw Part Not10gs12 Model 824 , Shaft Assy Part No803m000000304 Model 824 , Bearing Part Nog146 Model 824 , Bearing Part No803a000000019 Model 824 , Bearing Cup Part Nog484 Model 824 , Bearing [Cone] Part No803a000000022 Model 824 , Key Part Nok64r58 Model 824 , Gear Part No803b000000012 Model 824 , Bearing Part Nog427 Model 824 , Bearing Cup Part Nog444 Model 824 , Oil Seal Part No803a000000020 Model 824 , Gasket Part No803d000000003 Model 824 , Shim Set Part No803b000000016 Model 824 , Plug Part No1027a050000003 Model 824 , Axle Cap Part No00eb000000094 Model 824 , Gear Box Cover Part No00ec000000131 Model 824 , Key Part Nok60r36 Model 824 , Spacer Part No803a000000124 Model 824 , Sealing Plate Part No803b000000015 Model 824 , Square Head Plug Part Nop9bp Model 824 , Dowel Pin Part No012a000001102 Model 824 , Spacer Part No803a000000121 Model 824 , Spacer Part No803a000000122 Model 824 , Spacer Part No803a000000123 Model 824 , Washer Part No621a000000074 Model 824 , Hex Nut, Nyloc Part Nol274 Model 824 , Lock Nut Part No803b000000488 Model 824 , Wheel Stud Part No802a000000708 Model 824 , Hex Nut, Nyloc Part Nol262t Model 824 , Wheel Nut Part No802a000000709 Model 824 , Upper Deck Assy. Part No824m000000324 Model 824 , Slotted Bolt (A Size) Part No824b000000415 Model 824 , Wedge Part No824b000000416 Model 824 , Spring Washer Part Now10gf Model 824 , Hex Nut Part Not10gg Model 824 , Hex Nut, Slotted Part Not24gk Model 824 , Cotter Pin Part Nol153 Model 824 , Stud Part No00ea000000122 Model 824 , Side Sheet-Lh Part No824c000000327 Model 824 , Side Sheet-Rh Part No824c000000328 Model 824 , Bumper Bar Assy. Part No824m000000113 Model 824 , Hex Nut Part Not14gg Model 824 , Spring Washer Part Now14gf Model 824 , Lock Plate For Model 824 Part No00ea000000168 Model 824 , Taper Wedge Part No00ea000000158 Model 824 , Spring Washer Part Now16gf Model 824 , Gear Box Assy. -Bucket Drive Part No824m000000334 Model 824 , Upper Chain Roller Assy Part No824m000000193 Model 824 , First Intermediate Pinion Part No630b000000247 Model 824 , Gear Chain Reel Bucket Drive Part No630c000000248 Model 824 , Bearing Cartridge Part No630b000000272 Model 824 , Brg.Cartridge Chain Reel Shaft Part No630c000000274 Model 824 , 1St Int.Brg.Cartridge Part No630b000000275 Model 824 , Gasket,Motor Pinion Cap Part No630a000000290 Model 824 , Gasket,Bucket Drive Cover Part No630c000000292 Model 824 , Chain Reel Part No004c000000169 Model 824 , Chain End Pin Lock Part No004a000000182 Model 824 , Intermediate Gear Part No824c000000041 Model 824 , Chain Roller Assy Part No021m000000132 Model 824 , Bearing Part Nog204 Model 824 , Bucket Drive Hsg.Cover Plate Part No824e000000420 Model 824 , Motor Pinion Bucket Drive Part No824b000000040 Model 824 , Bearing Part Nog448 Model 824 , Bearing Cone Part Nog449 Model 824 , Bearing Part Nog546 Model 824 , Bearing Part Nog547 Model 824 , Bearing Part Nog548 Model 824 , Bearing Part Nog549 Model 824 , Bearing Part Nog562 Model 824 , Bearing Part Nog563 Model 824 , Brass Shim Set Part Nog1214 Model 824 , Shim Set Part Nog1215 Model 824 , Shim Set Part Nog1227 Model 824 , Seal Part Nos300 Model 824 , Key Part Nok10e60 Model 824 , Key Part Nok12e58 Model 824 , Key Part Nok8r34 Model 824 , Hex Head Bolt Part Not8ggw20 Model 824 , Hex Head Bolt Part Not8ggw16 Model 824 , Inter.Gear For Buc.Drive Part No630c000000245 Model 824 , 2Nd Int.Pinion Bucket Drive Part No630c000000249 Model 824 , Bearing Cone Part Nog533 Model 824 , Bearing Cup Part Nog534 Model 824 , Bearing Cone Part Nog531 Model 824 , Bearing Cup Part Nog532 Model 824 , Key Part Nok12e28 Model 824 , Chain Real Shaft Part No630c000000258 Model 824 , Square Head Plug Part Nobp2bp Model 824 , Pipe Plug Part Nobp6bp Model 824 , Plug, Csk Square Part Nobp5bpa Model 824 , Chain Roller Shaft Part No630b000000081 Model 824 , Shim Set Part Noga16ax Model 824 , Bearing Cone Part Nog403 Model 824 , Bearing Cup Part Nog416 Model 824 , Chain Roller Part No630c000000083 Model 824 , Gasket Part Nosga32a Model 824 , Seal Part Nos2300 Model 824 , Grease Fitting Part Nop2fg Model 824 , Retainer Plate Part No630a000000138 Model 824 , Chain Roller Cap Part No630b000000084 Model 824 , Chain Roller Shaft Part No021b000000052 Model 824 , Bearing Part Nog121 Model 824 , Roller, Bucket Chain Part No021a000000053 Model 824 , Lock Washer Part Nol49 Model 824 , Lock Nut Part Nol819 Model 824 , Spring Washer Part Now24gf Model 824 , Hex Nut Part Not24gg Model 824 , Bucket Chain Part No824m000000157 Model 824 , Bucket Chain Assy Part No630m000002361 Model 824 , End Link Pin Part No621a000000666b Model 824 , Cylinder Assy Part No803m000000099 Model 824 , Collar Assy Part No00eb000000037 Model 824 , Rocker Arm Cable Part No630b000002487 Model 824 , Cable Spring Part No630a000000042 Model 824 , Bumper Spring Part No024b000000220 Model 824 , Pin Part No803b000000138 Model 824 , Cable Pin Part Nohra196 Model 824 , Hex Nut, Nyloc Part Nol213 Model 824 , Cotter Pin Part Nol163 Model 824 , Rocker Arm R.H. Part No824m000000380 Model 824 , Rocker Arm L.H. Part No824m000000378 Model 824 , Rocker Arm Yoke Bar Part No824d000000101 Model 824 , Air Motor Assy Part No201m000005046 Model 824 , Gasket For Motor Housing Part No021a000000196 Model 824 , Wrist Pin Assembly Part No201m000000086 Model 824 , Cylinder Part No201c000000744 Model 824 , Cylinder Gasket Part No201a000000064 Model 824 , Bearing Part Nog267 Model 824 , O Ring Part No621a000000545 Model 824 , Valve Housing Cover Part No271c000000020 Model 824 , Ext Circlip 5100-255 Part Nol1126 Model 824 , Bearing Part Nog134 Model 824 , Oil Ring Part No201a000000073 Model 824 , Piston Part No201c000000054 Model 824 , Comp. Ring Part No201a000000072 Model 824 , Vent Cap Assy Part No200m000000084 Model 824 , Drain Cock, Valve Part Nobp2rve Model 824 , Plug,Sq.Head Part Nop2fp Model 824 , Crank Shaft Group Plain Part No201m000000465 Model 824 , Bearing Part Nog278 Model 824 , Bushing Part No201a000000049 Model 824 , Crank Sleeve Part No201b000000759 Model 824 , Retaining Ring Part No201a000000048 Model 824 , Connecting Rod Part No201e000000053 Model 824 , Bearing Adaptor Part No201a000000733 Model 824 , Crank Shaft Assy Part No201m000000761 Model 824 , Hex Head Bolt Part Not8hg24 Model 824 , Cap Screw Washer Part No201a000000099 Model 824 , Rotary Valve Part No271d000000002 Model 824 , Valve Housing Part No271e000000004 Model 824 , Motor Housing Part No201e000000763 Model 824 , Pitcher Tee Part No623a000002559 Model 824 , Elbow M/F Taper Seat Part Nobp7bsla Model 824 , Sediment Trap Assy. Part No623m000002511 Model 824 , Union Elbow,90 Degree F/F Part Nobp7bsl Model 824 , Union Part Nobp7bsa Model 824 , Union, Female Part Nobp7bs Model 824 , Elbow,Std.90 Degree F/F Part Nobp7bl Model 824 , Elbow Std 45 Deg. Part Nop9bla Model 824 , Elbow Street, 45 Degree M/F Part Nobp7blc Model 824 , Close Nipple Part Nobp9fna Model 824 , Nipple Part Nobp7fna Model 824 , Elbow,45 Degree F/F Part Nobp7bla Model 824 , Stand Pipe Part No623a000002655 Model 824 , Hose Clip Part Nop105phb Model 824 , Stand Pipe (1 1/4 Bspt) Part No621a000000202 Model 824 , Hose Clamp Part Nop9phb Model 824 , Hose Clip Part Nop13phb Model 824 , Hose Clamp Part Nop10phb Model 824 , Nipple Part Nobp7fn40 Model 824 , Nipple Part Nobp7fn32 Model 824 , Nipple Part Nobp7fn20 Model 824 , Nipple Part Nobp7fn28 Model 824 , Nipple Part Nobp7fn44 Model 824 , Nipple Part Nobp7fn48 Model 824 , Nipple Part Nobp9fn30 Model 824 , Nipple Part Nobp7fn34 Model 824 , Air Control Valve Assy Part No824m000000272 Model 824 , Air Control Valve Assy. Part No824m000000274 Model 824 , Control Handle Assy Part No623c000003187 Model 824 , Control Handle Assy.L.H. Part No623c000003195 Model 824 , Link Part No623a000003189 Model 824 , Link Part No623a000003190 Model 824 , Pin Part No623a000003191 Model 824 , Pin Part No623a000003856 Model 824 , Valve Manifold (Traction) Part No824c000000267 Model 824 , Tab Washer Part Nosd014/019 Model 824 , E Clip - 9 Mm Part Nosc020/012 Model 824 , Valve Manifold Part No824c000000294 Model 824 , Control Handle Part No824c000000295 Model 824 , Air Control Vlv Assy-Service Part No824b070000011 Model 824 , Latch Part No824b000000268 Model 824 , Valve Handle Grip Part No621a000000110 Model 824 , Cap Part No024b000000794 Model 824 , Spacer Part Nogsa8d Model 824 , Spring Part No824a000000277 Model 824 , Hex Socket Head Cap Screw Part Not8gmn32 Model 824 , Gasket For Cont.Valvebody Part No824b000000215 Model 824 , Bush Part Nosd001/014 Model 824 , Flat Washer Part Now8ga Model 824 , Spring Washer Part Now6gf Model 824 , Valve End Plate. Part No824m000000269 Model 824 , Swivel Assy Part No623m000004263 Model 824 , Oiler Head Assy Part No623m000002749 Model 824 , Screen Oiler Cap Part No630a000000273 Model 824 , Oiler Filler Plug Part No630a000000271 Model 824 , Drain Cock Part Nobp3rvd Model 824 , Air Screen Part No012a000000076 Model 824 , Lock Washer Part Nolla5 Model 824 , Gasket Part Nosga24a Model 824 , Flat Washer Part Nowa1 Model 824 , Flat Washer Part Nowa2 Model 824 , Bucket Bottom,Cast Part No824d000000229 Model 824 , Bucket Assy.(0.425 Cu.M.) Part No824m000000231 Model 824 , Hull Group Part No824m100000013 Model 824 New , Basic Gear Box Part No824m100000014 Model 824 New , Square Head Plug Part Nop4bp Model 824 New , Gear Box Part No824m000000314 Model 824 New , Spacer(Large) Part No824b000000401 Model 824 New , Spacer (Small) Part No824b000000402 Model 824 New , Tab Washers Part Nosd014/065 Model 824 New , Tab Washers Part Nosd014/013 Model 824 New , Tab Washer Part Nosd014/063 Model 824 New , Wheel Assy. Part No824a070000012 Model 824 New , Tyre 7.00X12x14 Ply Part No824a050000006 Model 824 New , Upper Deck Group Part No824b070000013 Model 824 New , Motor Mtg. Cover Part No201c000005043 Model 824 New , Motor Housing Assy Part No201m000000762 Model 824 New , Hex Head Plug (Bsp) Part Nosc036/009 Model 824 New , Crank Shaft Group Part No201m000005052 Model 824 New , Bucket Drive Housing Part No824e000000333 Model 824 New , Upper Deck Part No824c020000033 Model 824 New , Rail Thrust End-Rh Part No824d000000344 Model 824 New , Rail Thrust End-Lh Part No824d000000345 Model 824 New , Rocker Arm Group Part No824m000000382 Model 824 New , Pneumatic Control Group Part No824b070000016 Model 824 New , Oiler Bottle Assy. Part No630m000005161 Model 824 New , Air Control Valve Assy.-Traction Part No824b070000014 Model 824 New , Air Control Valve , Service Part No824b070000015 Model 824 New , Ball Valve Part No150a050000039 Model 824 New , Needle Valve Part No150a050000033 Model 824 New , Tee,Special Part No824a020000024 Model 824 New , Tee, Reducing Branch Part Nobp8bts7 Model 824 New , Coupling Part Nostdd017/012 Model 824 New , Bearing Cup/Cone Part Nog484/803A000000022 Model 824 New , Bearing Cup/Cone Part Nog427/444 Model 824 New , Bearing Cup/Cone Part Nog448/449 Model 824 New , Bearing Cup/Cone Part Nog546/547 Model 824 New , Bearing Cup/Cone Part Nog548/549 Model 824 New , Bearing Cup/Cone Part Nog562/563 Model 824 New , Bearing Cup/Cone Part Nog533/534 Model 824 New , Bearing Cup/Cone Part Nog531/532 Model 824 New , Bearing Cup/Cone Part Nog403/416 Model 824 New , Bearing Cup/Cone Part Nog510/G511 Model 824 New , Front End Assy.(Pp 2.0 Cu.M.) Part No912b070000383 Model 912Lhd , Arm Assy.(Pp Bkt.) Part No912m100000299 Model 912Lhd , Arm (P.P. Bucket) Part No912d020000409 Model 912Lhd , Bush,Metric Part Nombh100/116/70A Model 912Lhd , Lever Assy. Part No912m100000249 Model 912Lhd , Dump Lever Part No912c030000021 Model 912Lhd , Bush (Metric) Part Nombh125/145/100A Model 912Lhd , Link Assy. Part No912a070000297 Model 912Lhd , Link Part No912a030000031 Model 912Lhd , Bush (Metric) Part Nombh75/85/75A Model 912Lhd , Roll Back Cylinder Part No912b050000282 Model 912Lhd , Spherical Bearing Part Nostdc003/047 Model 912Lhd , Circlip Part Noeea0016332 Model 912Lhd , Grease Nipple Part Noeea0015106 Model 912Lhd , Seal Kit (* Marked Items) Part Noeea0016352 Model 912Lhd , Valve -Seal Kit ( * ) Part Noeea0020818 Model 912Lhd , Circlip Part Noeea0021612 Model 912Lhd , Grease Nipple With Cap Part Noeea0020796 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021634 Model 912Lhd , Lift Cylinder Part No912b050000283 Model 912Lhd , Head End Cover Part Noeea0016338 Model 912Lhd , Load Cartridge Valve Part Noeea0015117 Model 912Lhd , Counter Balance Valve Part Noeea0020817 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021635 Model 912Lhd , P.P. Bucket Assy.(2.0 Cu.M.) Part No912m100000265 Model 912Lhd , Bucket,Push Plate Part No912m100000266 Model 912Lhd , Lip, Bucket Part No912c030000017 Model 912Lhd , Spacer Part Noeea0020665 Model 912Lhd , Locking Ring Part Noeea0002017 Model 912Lhd , Push Plate,Upper Part No912d020000355 Model 912Lhd , Spacer Part Noeea0009768 Model 912Lhd , Spacer Part Noeea0020664 Model 912Lhd , Push Plate,Lower Part No912c020000356 Model 912Lhd , Shaft Upper Part No912a060000130 Model 912Lhd , Shaft Lower Part No912a060000129 Model 912Lhd , Flat Washer Part Nomaw24ga Model 912Lhd , Push Plate Cylinder Part No912b050000285 Model 912Lhd , Circlip Part Noeea0015103 Model 912Lhd , Circlip Part Noeea0020952 Model 912Lhd , Spherical Bearing Part Nostdc003/036 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021637 Model 912Lhd , Pin Part No912b060000138 Model 912Lhd , Pin (F.F. To R/B) Part No811b060000117 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-120 Model 912Lhd , Spring Washer Part Nomdw10sa Model 912Lhd , Hex Head Bolt Part Nostdb035-10-75 Model 912Lhd , Pin (Arm - Bucket) Part No912b060000113 Model 912Lhd , Pin (Arm - Bucket) Part No912b060000114 Model 912Lhd , Pin (Link-Lev/Bucket) Part No912b060000136 Model 912Lhd , Pin (F.F.- Dump Cyl.) Part No912b060000101 Model 912Lhd , Pin (Lever-Dump Cyl.) Part No912b060000137 Model 912Lhd , Pin (F.F.- Arm) Part No912b060000106 Model 912Lhd , Pin (F.F.- Arm) Part No912b060000107 Model 912Lhd , Pin (F.F.- Lift Cyl.) Part No912b060000108 Model 912Lhd , Pin (Arm - Lift Cyl.) Part No912b060000111 Model 912Lhd , Pin (Arm/Lever) Part No912b060000135 Model 912Lhd , Hex Head Bolt Part Nostdb035-20-55 Model 912Lhd , Hex Head Bolt Part Nostdb035-20-45 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2608 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-150 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-35 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-35 Model 912Lhd , Spring Washer Part Nomdw20sa Model 912Lhd , Spring Washer Part Nomdw16sa Model 912Lhd , Hex Nut Part No369-0112 Model 912Lhd , Grease Nipple Part Nobp1fg Model 912Lhd , Hex Head Bolt Part Nostdb035-16-35 Model 912Lhd , Pin Assy. Part No912b020000479 Model 912Lhd , Pin Part No912b060000161 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-70 Model 912Lhd , Pin Assy. Part No912b020000480 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-25 Model 912Lhd , Rubber Guard-Wheel Part No912a050000232 Model 912Lhd , Clamp Part Noeea0007778 Model 912Lhd , Clamp Part Noeea0007779 Model 912Lhd , Clamp Part Noeea0007780 Model 912Lhd , Rear End Assy Part No912c070000398 Model 912Lhd , Boss Part No19wl020000427 Model 912Lhd , Suction Pipe Assy Part Noeea0033572 Model 912Lhd , Threaded Boss Part Noeea0028450 Model 912Lhd , Canopy Bkt Part No912a020000826 Model 912Lhd , Spherical Bearing Part Nostdc003/056 Model 912Lhd , Bush,Metric Part Nombh150/170/140A Model 912Lhd , Wear Washer Part No912b060000117 Model 912Lhd , Seal Part Noseg251 Model 912Lhd , O Ring Part Noseg1099 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2232 Model 912Lhd , Steering Cylinder Part No912b050000284 Model 912Lhd , Circlip Part Noeea0016355 Model 912Lhd , Bearing Part Nostdc003/030 Model 912Lhd , Seal Kit (* Marked Items) Part Noeea0016353 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021636 Model 912Lhd , Canopy Assy Part No912b070000379 Model 912Lhd , Flat Washer Part Nomaw16gag Model 912Lhd , Hex Head Bolt Part Nostdb035-16-45 Model 912Lhd , Flat Washer Part Nomaw20gag Model 912Lhd , Washer Part Nomaw16gcg Model 912Lhd , Hex Head Bolt Part Nostdb035-16-60 Model 912Lhd , Spacer Part No912a060000195 Model 912Lhd , Bolster (M/C) Part No912b020000839 Model 912Lhd , Seat- Hyd Suspension Part No907a050000093 Model 912Lhd , Fuel Tank Cover Part No912a020000797 Model 912Lhd , Return Pipe Part Noeea0033571 Model 912Lhd , Pipe Part Noeea0031079 Model 912Lhd , Fuel Tank Cap With Neck Part No907a050000068 Model 912Lhd , Gasket,Diesel Tank Cover Part No910a050000078 Model 912Lhd , Cover Part No811b020000150 Model 912Lhd , Gasket Part No811b050000067 Model 912Lhd , Plug Part No1027a050000003 Model 912Lhd , Steel Ball Part Nogr6 Model 912Lhd , Oil Level Window Part No241a000000284 Model 912Lhd , Hex Hd Bolt (Bolster) Part No912a060000133 Model 912Lhd , Suction Strainer Part No625b050000070 Model 912Lhd , Pin (F.F.- St.Cyl.) Part No912b060000104 Model 912Lhd , Pin (R.F.- St.Cyl.) Part No912b060000105 Model 912Lhd , Spacer Part No912a060000123 Model 912Lhd , Clamp Half Part No912b060000115 Model 912Lhd , Pin (F.F.- R.F.) Part No912b060000109 Model 912Lhd , Clamp Half Part No912b060000116 Model 912Lhd , Bonded Seal Part Nosc011/027 Model 912Lhd , Drain Cock, Valve Part Nobp2rve Model 912Lhd , Strainer Part No102135 Model 912Lhd , O Ring Part No103967 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-25 Model 912Lhd , Tank Cap Assembly Part No229334 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-30 Model 912Lhd , Spring Washer Part Nomdw08sa Model 912Lhd , Spring Washer Part Nomdw24sa Model 912Lhd , Hex Head Bolt Part Nostdb035-12-90 Model 912Lhd , Flat Washer Part Nomaw12ga Model 912Lhd , Hex Head Bolt Part Nostdb035-08-80 Model 912Lhd , Hex Nut Part No369-0108 Model 912Lhd , Hex Head Bolt Part Nostdb035-16-160 Model 912Lhd , Hex Nut Part No369-0116 Model 912Lhd , Lock Wire (As Required) Part Nol400 Model 912Lhd , Rear Reflector Part No12wl040000126 Model 912Lhd , Threaded Boss Part No016a000099060 Model 912Lhd , Link Part Noeea0004049 Model 912Lhd , Hex Head Bolt Part Not12gg24 Model 912Lhd , Handle, Operator Part No912a020000557 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-45 Model 912Lhd , Spring Washer Part Now12gf Model 912Lhd , Fuel Level Gauge Part No912b050000314 Model 912Lhd , Fuel Level Guard Part Noeea0025768 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2206 Model 912Lhd , Gasket Part No910a050000068 Model 912Lhd , Cover, Fuel Tank Part No910a020000239 Model 912Lhd , Cover, Battery Part No912a020000897 Model 912Lhd , Pipe Part No912a020000830 Model 912Lhd , Engine Assy (Deutz) Part No912b070000393 Model 912Lhd , Engine (Deutz 90 Kw) Part No912b050000336 Model 912Lhd , Engine Mtg. Front Part No912a020000783 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-110 Model 912Lhd , Nyloc Nut Part No369-0612 Model 912Lhd , Fuel Line (Circuit) Part No912b070000384 Model 912Lhd , Diesel Hose Part No917a050000052 Model 912Lhd , Hollow Screw Part No12wl4195996a Model 912Lhd , Sealing Ring Part No12wl050000087 Model 912Lhd , Banjo Bolt Part No822a050000047 Model 912Lhd , Washer, Banjo Bolt Part No822a050000046 Model 912Lhd , Diesel Hose Part No912a050000371 Model 912Lhd , Fuel Hose Part No12wl050000404 Model 912Lhd , Hose Clamp (Fuel Circuit) Part No12wl050000172 Model 912Lhd , Bracket (Fuel Filter) Part Noeea0033563 Model 912Lhd , Hex Head Screw Part Nomt05lg10g Model 912Lhd , Spring Washer Part Nomdw05sa Model 912Lhd , Banjo Connector Part No12wl050000213 Model 912Lhd , Transmission (912B Mk-Ii) Part No912d050000160 Model 912Lhd , Tube Assy. Part Noeea0013743 Model 912Lhd , O Ring Part Noeea0013082 Model 912Lhd , Tube Clip Part Noeea0019348 Model 912Lhd , Tube Assy. Part Noeea0013741 Model 912Lhd , Tube Slleve Part Noeea0005696 Model 912Lhd , Sleeve Lock Part Noeea0008046 Model 912Lhd , Input Shaft Part Noeea0013744 Model 912Lhd , Output Shaft Front Bearing Part Noeea0005866 Model 912Lhd , Retainer Ring Part Noeea0008035 Model 912Lhd , Gear Part Noeea0013746 Model 912Lhd , Bearing Part Noeea0013745 Model 912Lhd , Output Shaft Oil Seal Part Noeea0005867 Model 912Lhd , Air Breather Part Noeea0005680 Model 912Lhd , Plug Part Noeea0013748 Model 912Lhd , Screen Assy. Gasket Part Noeea0005687 Model 912Lhd , Screw Part Noeea0008056 Model 912Lhd , Screw-Converter Housing Part Noeea0013076 Model 912Lhd , Lock Washer Part Noeea0005685 Model 912Lhd , Screw Part Noeea0008052 Model 912Lhd , Cap Screw Part Noeea0019349 Model 912Lhd , Lock Washer Part Noeea0013742 Model 912Lhd , Sleeve Part Noeea0008045 Model 912Lhd , Trans. Case & Tube Assy. Part Noeea0013750 Model 912Lhd , Clip Part Noeea0013109 Model 912Lhd , Pressure Tube Part Noeea0008060 Model 912Lhd , Rivet Part Noeea0008072 Model 912Lhd , Cap Screw Part Noeea0019350 Model 912Lhd , Washer Part Noeea0013112 Model 912Lhd , O Ring Part Noeea0011654 Model 912Lhd , Tube Part Noeea0011588 Model 912Lhd , Oil Distributor Part Noeea0011609 Model 912Lhd , Dowel Pin Part Noeea0008061 Model 912Lhd , Magnetic Drain Plug Part Noeea0005708 Model 912Lhd , Screen Assembly Part Noeea0005688 Model 912Lhd , Bushing (Not Shown) Part Noeea0013116 Model 912Lhd , Washer-Shim (Not Shown) Part Noeea0013117 Model 912Lhd , O Ring (Not Shown) Part Noeea0019352 Model 912Lhd , Tube Assy. Part Noeea0013110 Model 912Lhd , Oring, Suction Line Part Noeea0005966 Model 912Lhd , Pressure Tube Part Noeea0011587 Model 912Lhd , Cover Part Noeea0013751 Model 912Lhd , Nut Part Noeea0008079 Model 912Lhd , Stud Part Noeea0011561 Model 912Lhd , Pipe Plug Part Noeea0005683 Model 912Lhd , Gear(27T) Part Noeea0013738 Model 912Lhd , Gear-High Range 52T Part Noeea0011585 Model 912Lhd , Gear-Drive Low 4Th. 26T Part Noeea0013737 Model 912Lhd , Group Reverse 3Rd Shaft Part Noeea0019403 Model 912Lhd , Piston Ring Part Noeea0008081 Model 912Lhd , Front Bearing Retaing Ring Part Noeea0005808 Model 912Lhd , Washer Part Noeea0013140 Model 912Lhd , Snap Ring Part Noeea0008084 Model 912Lhd , Retainer Ring Part Noeea0008086 Model 912Lhd , Inner Disc Part Noeea0013144 Model 912Lhd , Assy. Clutch Piston & Seals Part Noeea0019377 Model 912Lhd , Outer Seal Part Noeea0008091 Model 912Lhd , Seal-Clutch Piston Metering Part Noeea0019354 Model 912Lhd , Assy-Clutch Piston & Seals Part Noeea0022169 Model 912Lhd , Retainer Spring Part Noeea0022171 Model 912Lhd , Snap Ring Retainer Part Noeea0008098 Model 912Lhd , Clutch Drive Gear Bearing Part Noeea0005814 Model 912Lhd , Return Spring Part Noeea0008102 Model 912Lhd , Bearing Part Noeea0008104 Model 912Lhd , Snap Ring Part Noeea0008105 Model 912Lhd , Spacer Part Noeea0008106 Model 912Lhd , Shield Out Part Noeea0008107 Model 912Lhd , Rear Bearing Part Noeea0013151 Model 912Lhd , Retainer Ring Part Noeea0008109 Model 912Lhd , Front Bearing Part Noeea0013142 Model 912Lhd , Front Bearing Snap Ring Part Noeea0005809 Model 912Lhd , Clutch Driven Gear Bearing Part Noeea0005811 Model 912Lhd , Spring Retainer Snap Ring Part Noeea0005820 Model 912Lhd , Washer Assy. Part Noeea0013150 Model 912Lhd , Ring Retainer Part Noeea0013162 Model 912Lhd , Sanp Ring Part Noeea0013163 Model 912Lhd , Assy-Fwd & 2Nd Shaft,Hub,Drum & Plug Part Noeea0019356 Model 912Lhd , Seal-Clutch Piston -Outer Part Noeea0022170 Model 912Lhd , Gear-2Nd 30T Part Noeea0011621 Model 912Lhd , Assy-Low Shaft,Hub,Drum & Plug Part Noeea0019357 Model 912Lhd , Assy-Low Hub & Drum Part Noeea0019358 Model 912Lhd , O Ring Part Noeea0013178 Model 912Lhd , Retaining Ring Part Noeea0013175 Model 912Lhd , Shaft Part Noeea0013753 Model 912Lhd , Plug Part Noeea0013179 Model 912Lhd , Assy-Clutch Piston & Seals Part Noeea0019359 Model 912Lhd , Clutch Inner Disc Part Noeea0008115 Model 912Lhd , Spring Part Noeea0013167 Model 912Lhd , Retainer Spring Part Noeea0013168 Model 912Lhd , Bearing Spacer Part Noeea0013170 Model 912Lhd , Spring Retainer Part Noeea0008124 Model 912Lhd , Ring Retainer Part Noeea0013169 Model 912Lhd , Gear(54T) Part Noeea0013752 Model 912Lhd , Bearing Assy. Part Noeea0013171 Model 912Lhd , Pilot Bearing Part Noeea0008130 Model 912Lhd , Bearing Cup Part Noeea0008156 Model 912Lhd , Cap Part Noeea0013756 Model 912Lhd , Screw Part Noeea0008122 Model 912Lhd , Lock Washer Part Noeea0005729 Model 912Lhd , O-Ring Part Noeea0013755 Model 912Lhd , O Ring Part Noeea0005960 Model 912Lhd , Bearing Cup Part Noeea0014098 Model 912Lhd , Bearing Cone Part Noeea0013173 Model 912Lhd , Shim (.004) Part Noeea0013757 Model 912Lhd , Shim (.007) Part Noeea0013758 Model 912Lhd , Shim (.01) Part Noeea0013759 Model 912Lhd , Shim (.02) Part Noeea0013760 Model 912Lhd , Snap Ring Part Noeea0013135 Model 912Lhd , Assy-4Th Hub & Drum Part Noeea0019360 Model 912Lhd , Assy-Idler Shaft,Gear And Plugs Part Noeea0019361 Model 912Lhd , Shaft And Bearing Assy. Part Noeea0013189 Model 912Lhd , Bearing Lock Ball Part Noeea0008138 Model 912Lhd , Locating Ring Part Noeea0008139 Model 912Lhd , Washer Part Noeea0013764 Model 912Lhd , Disc Hub Nut Part Noeea0013224 Model 912Lhd , Gasket Part Noeea0008141 Model 912Lhd , Cap Part Noeea0013765 Model 912Lhd , Ber.Cap Stud Lock Washer Part Noeea0005861 Model 912Lhd , Screw Part Noeea0013766 Model 912Lhd , Clutch Outer Disc Part Noeea0008088 Model 912Lhd , Spring Retainer Part Noeea0008101 Model 912Lhd , Spring Retainer Part Noeea0008103 Model 912Lhd , Snap Ring Part Noeea0011575 Model 912Lhd , Impeller Hub Gear Bearing Part Noeea0005738 Model 912Lhd , Gear-4Th Clutch & Hub 23T Part Noeea0019363 Model 912Lhd , Spacer Part Noeea0011595 Model 912Lhd , Bearing Part Noeea0011566 Model 912Lhd , Piston Ring Part Noeea0008224 Model 912Lhd , Oil Seal Part Noeea0013190 Model 912Lhd , Bearing Cap Part Noeea0008145 Model 912Lhd , Shim (.010) Part Noeea0008148 Model 912Lhd , Shim (.020) Part Noeea0008149 Model 912Lhd , Oring Part Noeea0008150 Model 912Lhd , Bearing Cup Part Noeea0011629 Model 912Lhd , Bearing Cone Part Noeea0013191 Model 912Lhd , Gear Spacer Part Noeea0013192 Model 912Lhd , Output Shaft Part Noeea0013193 Model 912Lhd , O Ring Part Noeea0008157 Model 912Lhd , O Ring Part Noeea0013195 Model 912Lhd , Screw Part Noeea0008160 Model 912Lhd , Screw Part Noeea0008143 Model 912Lhd , Bearing Cap Part Noeea0013088 Model 912Lhd , Gear(38T) Part Noeea0013739 Model 912Lhd , Group-Control Valve Assyy. Part Noeea0022603 Model 912Lhd , Detent Spring Part Noeea0011562 Model 912Lhd , Detent Ball Part Noeea0005905 Model 912Lhd , Assy. -Control Valve Housing Part Noeea0022636 Model 912Lhd , Seal Oil Part Noeea0019381 Model 912Lhd , Retainer Ring Part Noeea0011634 Model 912Lhd , Oil Seal Washer Part Noeea0005990 Model 912Lhd , Fwd & Rev Valve Spool Part Noeea0019379 Model 912Lhd , Switch Part Noeea0013281 Model 912Lhd , Plug Part Noeea0021156 Model 912Lhd , Plug Part Noeea0013217 Model 912Lhd , Pipe Plug Part Noeea0005881 Model 912Lhd , Speed Sel Valve Spool & Plug Part Noeea0019380 Model 912Lhd , Plug Part Noeea0006012 Model 912Lhd , Washer Part Noeea0006013 Model 912Lhd , Screw Part Noeea0011557 Model 912Lhd , Spacer Part Noeea0006002 Model 912Lhd , Valve Spool Part Noeea0011581 Model 912Lhd , Spool Spring Part Noeea0011582 Model 912Lhd , Screw Part Noeea0014100 Model 912Lhd , Plug Part Noeea0013430 Model 912Lhd , Modulated Valve Assy. Part Noeea0008162 Model 912Lhd , O Ring Part Noeea0005912 Model 912Lhd , Accu. Spring Outer Part Noeea0008163 Model 912Lhd , Accu. Spring Inner Part Noeea0008164 Model 912Lhd , Regulator Spring Part Noeea0005914 Model 912Lhd , Gasket, Control Valve Part Noeea0014466 Model 912Lhd , Flange Part Noeea0005872 Model 912Lhd , O-Ring Part Noeea0013736 Model 912Lhd , Nut Part Noeea0013734 Model 912Lhd , Flange Part Noeea0013732 Model 912Lhd , O Ring Part Noeea0013065 Model 912Lhd , Washer Part Noeea0013064 Model 912Lhd , Nut Part Noeea0008140 Model 912Lhd , Seal-Kit For Transmission Part Noeea0023870 Model 912Lhd , Inner Seal Part Noeea0008092 Model 912Lhd , Piston Ring Part Noeea0008227 Model 912Lhd , Outer Clutch Piston Ring Part Noeea0005790 Model 912Lhd , Inner Clutch Piston Seal Part Noeea0005791 Model 912Lhd , Gasket, Cover Part Noeea0010918 Model 912Lhd , O-Ring Part Noeea0014464 Model 912Lhd , Gasket Part Noeea0008075 Model 912Lhd , Gasket Part Noeea0008057 Model 912Lhd , O-Ring Part Noeea0023036 Model 912Lhd , Oil Ring Part Noeea0014477 Model 912Lhd , O Ring Part Noeea0014481 Model 912Lhd , Seal-Oil Part Noeea0023055 Model 912Lhd , Gasket Part Noeea0012193 Model 912Lhd , Gasket Part Noeea0013279 Model 912Lhd , Gasket Part Noeea0023037 Model 912Lhd , Gasket Part Noeea0023039 Model 912Lhd , Gasket Part Noeea0023040 Model 912Lhd , Seal-Oil Part Noeea0023041 Model 912Lhd , Gasket Part Noeea0023051 Model 912Lhd , Gasket Part Noeea0023052 Model 912Lhd , Flange Output (6C) Part Noeea0033418 Model 912Lhd , O-Ring Part Noeea0033419 Model 912Lhd , Washer Part Noeea0033420 Model 912Lhd , Nut (Idler Shaft) Part Noeea0033421 Model 912Lhd , Transmission Mounting Bra Part No912c020000287 Model 912Lhd , Transmission Mounting Bra Part No912c020000288 Model 912Lhd , Nipple Part Nobp6fn32 Model 912Lhd , Rubber Guard-Trans. Part No912a050000242 Model 912Lhd , Dip Stick Part No912a050000080 Model 912Lhd , Pipe Part No912a020000298 Model 912Lhd , Hex Head Bolt Part No912a060000191 Model 912Lhd , Elbow,Std.90 Degree F/F Part Nobp6bl Model 912Lhd , Hex Head Bolt Part No912a060000192 Model 912Lhd , Flat Washer Part Nomaw08ga Model 912Lhd , Torque Converter (912B Mk-Ii) Part No912a050000159 Model 912Lhd , Pressure Regulatingvalve Group Part Noeea0013880 Model 912Lhd , Regulator Valve Assy Part Noeea0013820 Model 912Lhd , Valve Piston Part Noeea0013817 Model 912Lhd , Valve Spring , Inner Part Noeea0008247 Model 912Lhd , Valve Spring Part Noeea0013816 Model 912Lhd , Valve Stop Part Noeea0008243 Model 912Lhd , O Ring Part Noeea0005697 Model 912Lhd , Roll Pin Part Noeea0013815 Model 912Lhd , Safety Valve Seat Part Noeea0013819 Model 912Lhd , Valve Spring Part Noeea0008250 Model 912Lhd , Safety Valve Plunger Part Noeea0013198 Model 912Lhd , Gasket Part Noeea0013818 Model 912Lhd , O Ring, Suction Line Part Noeea0005712 Model 912Lhd , Plug(Not Shown) Part Noeea0013113 Model 912Lhd , Pipe Plug Part Noeea0005682 Model 912Lhd , Impeller To Cover ORing Part Noeea0005972 Model 912Lhd , Screw Part Noeea0013825 Model 912Lhd , Plug(Not Shown) Part Noeea0013118 Model 912Lhd , Bushing Part Noeea0013827 Model 912Lhd , O Ring (Not Shown) Part Noeea0013119 Model 912Lhd , Plug Part Noeea0013826 Model 912Lhd , Impeller Part Noeea0013862 Model 912Lhd , O-Ring Part Noeea0013863 Model 912Lhd , Hub Part Noeea0013864 Model 912Lhd , Bearing Part Noeea0013865 Model 912Lhd , Snap Ring Part Noeea0008265 Model 912Lhd , Spacer Part Noeea0011571 Model 912Lhd , Snap Ring Part Noeea0008268 Model 912Lhd , Retaining Ring Part Noeea0008269 Model 912Lhd , Turbine Hub Part Noeea0008270 Model 912Lhd , Screw Part Noeea0008272 Model 912Lhd , Cap Screw Part Noeea0019390 Model 912Lhd , Snap Ring Part Noeea0008275 Model 912Lhd , Bearing Part Noeea0008276 Model 912Lhd , Screw, Cover Part Noeea0010946 Model 912Lhd , Piston Ring Part Noeea0008278 Model 912Lhd , Sleeve Assy. Part Noeea0013842 Model 912Lhd , Lock Washer Part Noeea0008280 Model 912Lhd , Screw Part Noeea0008281 Model 912Lhd , Snap Ring Part Noeea0013829 Model 912Lhd , Bearing Part Noeea0008283 Model 912Lhd , Gear (28T) Part Noeea0013831 Model 912Lhd , Output Shaft Part Noeea0013832 Model 912Lhd , Ball Bearing Part Noeea0010850 Model 912Lhd , O Ring Part Noeea0013136 Model 912Lhd , Bearing Retainer Part Noeea0013834 Model 912Lhd , Washer Part Noeea0013735 Model 912Lhd , Oil Seal Part Noeea0013838 Model 912Lhd , Stud Part Noeea0013840 Model 912Lhd , Snap Ring Part Noeea0008050 Model 912Lhd , Gear (21T) Part Noeea0013841 Model 912Lhd , Ball Bearing Part Noeea0010887 Model 912Lhd , Piston Ring Part Noeea0008293 Model 912Lhd , Turbine Shaft Part Noeea0008294 Model 912Lhd , Hub Gear Part Noeea0013851 Model 912Lhd , Ring-Span Part Noeea0008296 Model 912Lhd , Charging Pump Sleeve Part Noeea0008297 Model 912Lhd , Gasket Part Noeea0013857 Model 912Lhd , Converter Charging Pump Part Noeea0008299 Model 912Lhd , Stud Part Noeea0013853 Model 912Lhd , Stud Nut Part Noeea0013069 Model 912Lhd , Gear (39T) Part Noeea0013844 Model 912Lhd , Bearing Part Noeea0013845 Model 912Lhd , Spacer Part Noeea0013846 Model 912Lhd , Bearing Part Noeea0013847 Model 912Lhd , Snap Ring Part Noeea0013848 Model 912Lhd , Drive Shaft Part Noeea0013849 Model 912Lhd , Snap Ring Part Noeea0008309 Model 912Lhd , Washer Part Noeea0013850 Model 912Lhd , Pump Adaptor Part Noeea0013858 Model 912Lhd , Stator Support Screw Part Noeea0005728 Model 912Lhd , Group Pump Adaptor Position -A Part Noeea0013887 Model 912Lhd , Pump Adaptor Part Noeea0013855 Model 912Lhd , Screw Part Noeea0013856 Model 912Lhd , Filter Assy. Part Noeea0008213 Model 912Lhd , Filter Element Assy. Part Noeea0023005 Model 912Lhd , Pump Drive Sleeve Snap Ring Assy. Part Noeea0023007 Model 912Lhd , Snap Ring Part Noeea0013814 Model 912Lhd , Seal Kit For Torque Converter Part Noeea0008320i Model 912Lhd , O-Ring Part Noeea0023009 Model 912Lhd , O-Ring Part Noeea0013833 Model 912Lhd , Oil Baffle Seal Part Noeea0008256 Model 912Lhd , Piston Ring Part Noeea0023019 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-55 Model 912Lhd , Engine Stud Part No912a060000210 Model 912Lhd , Hex Nut Part Nomt10lgg Model 912Lhd , Drive Line Assy.(Tc To Trans.) Part No912d050000162 Model 912Lhd , Propeller Shaft (Front) Part No912b050000339 Model 912Lhd , Spring Washer Part Now6gf Model 912Lhd , Hex Head Bolt Part Not6hg32 Model 912Lhd , Pillow Block Bearing Part No912a050000377 Model 912Lhd , Flat Washer Part Nomaw18ga Model 912Lhd , Spring Washer Part Nomdw18sa Model 912Lhd , Hex Head Bolt Part Nostdb035-18-65 Model 912Lhd , Propeller Shaft (Middle) Part No912b050000340 Model 912Lhd , Propeller Shaft (Rear) Part No912b050000341 Model 912Lhd , Front Axle Part No912b050000328 Model 912Lhd , Wheel Nut Part No912a060000204 Model 912Lhd , Axle Bolt Part No910a060000020 Model 912Lhd , Rear Axle Part No912b050000329 Model 912Lhd , Hex Head Bolt Part No912a060000212 Model 912Lhd , Bracket Part No912b020000803 Model 912Lhd , Clamp Half Part No912a020000334 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-55 Model 912Lhd , Hex Nut Part Nomt12lgg Model 912Lhd , Steering Wheel Part No912b070000278 Model 912Lhd , Steering Wheel(41741074A) Part No12wl23103032 Model 912Lhd , Bush, St. Wheel Part No912a060000190 Model 912Lhd , Pipe (Air Intake) Part No912a050000372 Model 912Lhd , T-Bolt Hose Clamp Part No19wl050001351 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-25 Model 912Lhd , Exhaust Module Part No912b070000376 Model 912Lhd , Gasket Part Noeea0028557 Model 912Lhd , Flange Weldment Assy. Part No822b020000091 Model 912Lhd , Catalytic Converter Part No912b050000342 Model 912Lhd , Gasket Part Noeea0033695 Model 912Lhd , Expansion Bellow Assy Part No912b020000849 Model 912Lhd , Flexible Bellow Part No912a050000343 Model 912Lhd , Exhaust Pipe Part No912b050000344 Model 912Lhd , V-Flange Part No822b020000099 Model 912Lhd , Pipe Part No912a050000347 Model 912Lhd , Flange Slotted Part Noeea0033697 Model 912Lhd , Bracket Part No912b020000850 Model 912Lhd , Clamp Part No912b020000419 Model 912Lhd , Flat Washer Part Now5ga Model 912Lhd , Spring Washer. Part Now7gf Model 912Lhd , Hex Head Bolt Part Not7gg20 Model 912Lhd , Heat Insulation Jacket Kit Part No912a050000380 Model 912Lhd , Exhaust Clamp Part No912a050000391 Model 912Lhd , Cooler Group Part No912b070000390 Model 912Lhd , Cooler (Radiator+Cac) Part No912b050000365 Model 912Lhd , Cable Reel Motor Part No611b050000320 Model 912Lhd , Shaft Seal Part Noeea0034480 Model 912Lhd , Spring Washer Part Now8gf Model 912Lhd , Hex Head Bolt Part Not8vg24 Model 912Lhd , Hex Nut Part Not8vg Model 912Lhd , Fan (Radiator+Cac) Part No912b050000363 Model 912Lhd , Hex Head Bolt Part Not4vg20 Model 912Lhd , Spring Washer Part Now4gf Model 912Lhd , Cooler Bracket Part No912b020000840 Model 912Lhd , Bracket Assy Part No912a020000901 Model 912Lhd , Rubber Sheet Part No912a050000373 Model 912Lhd , Pipe ( Cac In) Part No912a050000350 Model 912Lhd , Pipe ( Cac In) Part No912a050000351 Model 912Lhd , Silicon Hose (Cac) Part No912a050000355 Model 912Lhd , T-Bolt Hose Clamp Part No19wl050001411 Model 912Lhd , Pipe ( Cac Out) Part No912a050000352 Model 912Lhd , Silicon Hose (Cac) Part No912a050000369 Model 912Lhd , T-Bolt Hose Clamp Part No907a050000032 Model 912Lhd , Pipe ( Radiator In) Part No912a050000354 Model 912Lhd , Pipe ( Radiator Out) Part No912a050000353 Model 912Lhd , Silicon Hose (Radiator) Part No912a050000370 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-20 Model 912Lhd , Hose Part No19wl050001405 Model 912Lhd , Hose Clip Part Nop8phb Model 912Lhd , Coolant Hose Part Noeea0027287/001 Model 912Lhd , Coolant Hose Part Noeea0027286 Model 912Lhd , Coolant Hose Part Noeea0027287/002 Model 912Lhd , Fuel Hose Clip Part No12wl050000143 Model 912Lhd , Cooler (Hoc+Toc) Part No912b050000366 Model 912Lhd , Fan (Hoc+Toc) Part No912b050000364 Model 912Lhd , Flat Washer Part Nomaw12gag Model 912Lhd , U-Clamp Part No912a020000902 Model 912Lhd , Hex Nut Part No369-0106 Model 912Lhd , Cooler Guard Assy Part No912b070000391 Model 912Lhd , Cooler Guard Fab. Part No912b020000846 Model 912Lhd , Threaded Boss Part No811a060000056 Model 912Lhd , Hex Head Bolt Part Nostdb035-16-40 Model 912Lhd , Flat Washer Part Nomaw16ga Model 912Lhd , Hex Head Bolt Part Nostdb035-12-70 Model 912Lhd , Motor Guard Part No912a020000861 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-40 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-40 Model 912Lhd , Hydraulic Group (Front Tip) Part No912m100000366 Model 912Lhd , Transmission Hyd. Group Part No912c070000229 Model 912Lhd , O Ring Part Nos3306 Model 912Lhd , O Ring Part Nos3312 Model 912Lhd , O Ring Part Nos3316 Model 912Lhd , Swivel Nut Elbow Part Novu10f10e21bs Model 912Lhd , Swivel Nut Elbow Part Novu16f16e21bs Model 912Lhd , Straight Adaptor Part Novu6f6e16as Model 912Lhd , St. Adaptor Part Novu10f8e16as Model 912Lhd , St. Adaptor Part Novu12f12e16as Model 912Lhd , Adaptor Part Novu16f16e16as Model 912Lhd , Adaptor Part Novu16f16e02as Model 912Lhd , Hose Assy. Part Nostdd026/100 Model 912Lhd , Hose Assy. Part Nostdd026/108 Model 912Lhd , Hose Assy. Part Nostdd026/169 Model 912Lhd , Hose Assy. Part Nostdd026/173 Model 912Lhd , Hose Assy. Part Nostdd026/175 Model 912Lhd , Hose Assy. Part Nostdd026/242 Model 912Lhd , Hose Assy. Part Nostdd026/309 Model 912Lhd , Special Fitting Part Noeea0026099 Model 912Lhd , Hyd Fitting Part Novw16fb20 Model 912Lhd , Hex Socket Plug Part Nop1fpc Model 912Lhd , Trans. Control Valve Assy. Part No912b070000230 Model 912Lhd , Control Valve Assy. Part Noeea0014810 Model 912Lhd , Control Valve Mtg.Bracket Part No912b020000571 Model 912Lhd , Lever-Lh,Control Valve Assy. Part No912a020000572 Model 912Lhd , Lever-Rh,Control Valve Assy. Part No912a020000573 Model 912Lhd , Link Part No912a020000564 Model 912Lhd , Link Part No912a020000565 Model 912Lhd , Link (5/16) Part No912a060000174 Model 912Lhd , Pin Part No912a060000197 Model 912Lhd , Bushing Part Nogla12j Model 912Lhd , Pin Part Nohra4 Model 912Lhd , Pin Part Nohra3 Model 912Lhd , Cotter Pin Part Nol101 Model 912Lhd , Hex Head Bolt Part Not6gg12 Model 912Lhd , Flat Washer Part Now12g Model 912Lhd , Cotter Pin Part Nol110 Model 912Lhd , Hex Nut Part Not5hg Model 912Lhd , Handle Part No912a020000649 Model 912Lhd , Hex Socket Csk Head Screw Part No370-3037 Model 912Lhd , Tee Part Novu10f10e01ds Model 912Lhd , Straight Adaptor Part Nose024/429 Model 912Lhd , Special Elbow Part No912a020000477 Model 912Lhd , Adaptor Part Novu12f16e02as Model 912Lhd , Adaptor Part Novu12f16e16as Model 912Lhd , Valve Mounting Bracket Part No912a020000319 Model 912Lhd , Reducer(Bsp-Npt),M/M Part Nosc089/056 Model 912Lhd , Elbow 45 Deg. Part Novu12f12e21cs Model 912Lhd , Tee Assy. Part No912a020000617 Model 912Lhd , Union Tee Part Novu12f12e01ds Model 912Lhd , Tee Part Nop1rt Model 912Lhd , Filter Element Assembly. Part Noeea0008221 Model 912Lhd , Hex Head Bolt Part Not6gg20 Model 912Lhd , St. Adaptor Part Novu10f8e02as Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/022 Model 912Lhd , Hose Assembly Part No623d02584/319 Model 912Lhd , Hose Assy. Part Nostdd026/104 Model 912Lhd , Swivel Nut Branch Tee Part Novu6f6e33ds Model 912Lhd , Straight Adaptor Part Nose024/427 Model 912Lhd , Fitting Part Novu6f2e03bs Model 912Lhd , Adaptor Part Nodta001062-012 Model 912Lhd , Hose Assy. Part Nostdd026/089 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/042 Model 912Lhd , O Ring Part Nos2803 Model 912Lhd , Adaptor Metric/Jic Part Noeea0026098 Model 912Lhd , Service Hyd.Group(Front Tip) Part No912m100000257 Model 912Lhd , Bonded Seal Part Nosc011/016 Model 912Lhd , Bonded Seal Part Nosc011/024 Model 912Lhd , Bonded Seal Part Nosc011/009 Model 912Lhd , Fitting Part Novu6f4e02as Model 912Lhd , Straight Adaptor Part Novu10f10e01as Model 912Lhd , Straight Adaptor Part Nose024/206 Model 912Lhd , Hose Assy. Part Nostdd026/101 Model 912Lhd , Hose Assy. Part Nostdd026/114 Model 912Lhd , Hose Assembly Part No623d02584/283 Model 912Lhd , Hose Assy. Part Nostdd026/310 Model 912Lhd , Hose Assy. Part Nostdd026/319 Model 912Lhd , Hose Assy. Part Nostdd033/037 Model 912Lhd , Hose Assy. Part Nostdd026/240 Model 912Lhd , Hose Clip Part Nop105phb Model 912Lhd , Elbow, Street 90 Degree M/F Part Nobp7blb Model 912Lhd , Stand Pipe Part No625a060000092 Model 912Lhd , Special Elbow Part No912a020000315 Model 912Lhd , Stand Pipe (1 1/4 Bspt) Part No621a000000202 Model 912Lhd , Gauge Adaptor Part No811a060000088 Model 912Lhd , Elbow,Std.90 Degree F/F Part Nobp7bl Model 912Lhd , Standpipe Part No625a000001003 Model 912Lhd , Hose Part No623a01515/006 Model 912Lhd , Hyd.Hose (44 Mm) Part Noeea0009445 Model 912Lhd , Hose Clamp Part Nop10phb Model 912Lhd , Nipple Part Nobp7fna Model 912Lhd , Special Elbow Part Noeea0009295 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/002 Model 912Lhd , Hose Assy. Part Nostdd026/306 Model 912Lhd , Hex Head Bolt Part Nostdb035-06-16 Model 912Lhd , Spring Washer Part Nomdw06sa Model 912Lhd , Elbow Part Nose024/232 Model 912Lhd , Hydraulic Pump (Service) Part No912b050000385 Model 912Lhd , Gasket Part No912a050000230 Model 912Lhd , Pressure Filter Part No811a050000182 Model 912Lhd , Filter Element Part Noeea0018438 Model 912Lhd , Service Valve Part No912b050000238 Model 912Lhd , Pilot Vavle Part No912b050000216 Model 912Lhd , Filter Mounting Bracket Part No917a020000087 Model 912Lhd , Hex Head Bolt Part Not8gg24 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/008 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/009 Model 912Lhd , Bonded Seal Part Nosc011/026 Model 912Lhd , Hose Sleeve Part Noeea0023531 Model 912Lhd , Hose Clamp Part Noeea0018063 Model 912Lhd , Bonded Seal Part Nosc011/033 Model 912Lhd , Hex Bushing Part Nop98 Model 912Lhd , Straight Adaptor, M/M Part Nose012/088 Model 912Lhd , Plug For Qrc Part No625a060000008 Model 912Lhd , Quick Release Coupling Part No625a050000011 Model 912Lhd , Bspp Socket Part No625a050000106 Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/026 Model 912Lhd , Straight Adaptor, M/M Part Nose012/085 Model 912Lhd , Hydraulic Hand Pump Part No611b050000326 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-30 Model 912Lhd , Hex Nut Part No369-0110B Model 912Lhd , Relief Valve Assy. Part No625b050000064 Model 912Lhd , Relief Cartridge Part Noeea0008997 Model 912Lhd , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 912Lhd , Hyd.Hose (51 Mm) Part No625a050000113 Model 912Lhd , Return Line Filter Part Nosc100500205 Model 912Lhd , Filter Element Part Noeea0033330 Model 912Lhd , Straight Adaptor Part Nose024/213 Model 912Lhd , Straight Adaptor Part Nose024/209 Model 912Lhd , Straight Adaptor Part Nose024/219 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/006 Model 912Lhd , St. Adaptor Part Nose024/210 Model 912Lhd , St.Swivel Adaptor M/F Part Nose012/063 Model 912Lhd , Port Block Part No625c000000836 Model 912Lhd , Port Block Part Noeea0009305 Model 912Lhd , Straight Adaptor, M/M Part Nose012/106B Model 912Lhd , Hose Assembly Part No623d02584/703 Model 912Lhd , Hose Assly Part No623d02584/708 Model 912Lhd , Reducer, M/M Part Nose012/101 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/048 Model 912Lhd , Hose Assy. Part Nostdd026/266 Model 912Lhd , Tee M/M/M Part Nose012/137 Model 912Lhd , Straight Adaptor Part Nose024/212 Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/028 Model 912Lhd , Reducer, M/M Part Nose012/098 Model 912Lhd , Hose Assembly Part No623d02584/754 Model 912Lhd , Stand Pipe Part No803a000000337 Model 912Lhd , Stud(M8) Part No250a050000021 Model 912Lhd , Reducer, M/M Part Nose012/099 Model 912Lhd , Brake Hyd. Group Part No912b070000262 Model 912Lhd , Straight Adaptor Part Novu8f6e16as Model 912Lhd , Hose Assy. Part Nostdd026/039 Model 912Lhd , Adaptor Part Novu8f8e21cs Model 912Lhd , Hose Assy. Part Nostdd026/047 Model 912Lhd , Hose Assy. Part Nostdd026/051 Model 912Lhd , O Ring Part Nos3304 Model 912Lhd , Straight Adaptor (Unf To Bsp) Part Nose015/303 Model 912Lhd , Tee M/M/M Part Nose012/133 Model 912Lhd , Union Tee Part Novu6f6e01ds Model 912Lhd , Straight Adaptor (Long) Part Novu8f6e22as Model 912Lhd , Hose Assy. Part Nostdd026/283 Model 912Lhd , Tee Piece Assy. Part No813m000000226 Model 912Lhd , Tee M/M/M Part Nose012/131 Model 912Lhd , Hose Assembly Part No623d02584/289 Model 912Lhd , St.Swivel Adaptor M/F Part Nose012/062 Model 912Lhd , Straight Adaptor Part Nose024/222 Model 912Lhd , Hose Assembly Part No623d02584/333 Model 912Lhd , Hose Assy. Part Nostdd026/325 Model 912Lhd , Hose Assembly Part No623d02584/306 Model 912Lhd , Hose Assy. Part Nostdd026/315 Model 912Lhd , 3/2 Way Valve Part No19wl050000655 Model 912Lhd , Piston Accumulator(2 Ltr.) Part No912a050000241 Model 912Lhd , Seal Kit For Piston Accumulator Part Noeea0022044 Model 912Lhd , Sealing Ring Part Noeea0022384 Model 912Lhd , 3 Way Dcv Part No811a050000158 Model 912Lhd , Brake Valve Part No912b050000362 Model 912Lhd , Repair Kit, Brake Valve Part Noeea0025375 Model 912Lhd , Elbow, 135 Degree M/F Part Nose012/002 Model 912Lhd , Hex Head Bolt Part Nostdb035-06-35 Model 912Lhd , Flat Washer Part Nomaw06ga Model 912Lhd , Hose Assy. Part Nostdd026/014 Model 912Lhd , Pressure Reducing Valve Part No611a050000004 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-40 Model 912Lhd , Plug Adaptor Part No109793 Model 912Lhd , Plug Adaptor Part No110516 Model 912Lhd , Hose Assembly Part No623d02584/104 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/004 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/044 Model 912Lhd , Straight Adaptor, M/M Part Nose012/084 Model 912Lhd , Hex Head Bolt Part Not8gg16 Model 912Lhd , Threaded Boss Part No625a060000044 Model 912Lhd , Bracket, Pr Valve Part No625b020000362 Model 912Lhd , Reducer, M/M Part Nose012/094 Model 912Lhd , Straight Connector Part Novu6f8e16as Model 912Lhd , Flow Control Valve Part Norb2c050000101 Model 912Lhd , Manifold Block Part No917b060000025 Model 912Lhd , Hyd Fitting Part Novu8f8e16as Model 912Lhd , O Ring Part Nos3308 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2338 Model 912Lhd , Adapter Swivel Part Nose024/428 Model 912Lhd , Hose Assy. Part Nostdd026/179 Model 912Lhd , Straight Adaptor M/M Part Nose024/207 Model 912Lhd , Hose Assembly Part No623d02584/315 Model 912Lhd , Hose Assembly Part No623d02584/033 Model 912Lhd , Hose Assy. Part Nostdd026/025 Model 912Lhd , Hose Assy. Part Nostdd026/065 Model 912Lhd , Hose Assy. Part Nostdd026/031 Model 912Lhd , Pres.Gauge Isolator Valve Part No811a050000013 Model 912Lhd , Bracket, Acc. Charge Vlv Part No912a020000652 Model 912Lhd , Oil Pressure Gauge Part No813b000000185 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-30 Model 912Lhd , Clamp Part No912b020000628 Model 912Lhd , Hose Assy. Part Nostdd026/034 Model 912Lhd , Swivel Tee, 3/4 Part Novu8f8e26ds Model 912Lhd , Straight Adaptor Part Nose024/202 Model 912Lhd , Steering Hyd. Group Part No912m100000259 Model 912Lhd , Stand Pipe Part No623a000001490 Model 912Lhd , Hyd.Hose Part No625a00554/004 Model 912Lhd , Hyd.Hose (32 Mm) Part Noeea0009494 Model 912Lhd , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 912Lhd , St. Adaptor Part Novu10f12e02as Model 912Lhd , Straight Adaptor Part Nose024/221 Model 912Lhd , Straight Adaptor Part Nose024/208 Model 912Lhd , Special Elbow Part Noeea0009299 Model 912Lhd , Adaptor Part Novu12f12e33ds Model 912Lhd , St. Adaptor Part Novu12f12e02as Model 912Lhd , Straight Adaptor Part Novu12f8e16as Model 912Lhd , Hex Head Bolt Part Not6gg24 Model 912Lhd , Reducer, M/M Part Nose012/095 Model 912Lhd , Straight Adaptor Part Nose024/430 Model 912Lhd , Straight Adaptor Part Nose024/282 Model 912Lhd , Hose Assy. Part Nostdd026/130 Model 912Lhd , Hose Assy. Part Nostdd026/110 Model 912Lhd , Hose Assy. Part Nostdd026/172 Model 912Lhd , Gasket Part No912a050000229 Model 912Lhd , Accumulator Charge Valve Part No912b050000245 Model 912Lhd , Repair Kit Part Noeea0018821 Model 912Lhd , Hydraulic Pump (Str. & Br Part No912b050000069 Model 912Lhd , Orbitrol Steering Valve Part No912a050000384 Model 912Lhd , Steering Column Part No912b050000277 Model 912Lhd , Accumulator (4-Ltr) Part No811a050000191 Model 912Lhd , Seal Kit For (*) Marked Items Part Noeea0019109 Model 912Lhd , O-Ring Part Noeea0022385 Model 912Lhd , Elbow Part No912a050000021 Model 912Lhd , Clamp Part Noeea0019155 Model 912Lhd , Elbow, Street 90 Degree M/F Part Nobp6blb Model 912Lhd , Straight Adaptor Part Nose024/201 Model 912Lhd , Hose Assy Part Nostdd026/073 Model 912Lhd , Swivel Nut Elbow Part Novu6f6e21bs Model 912Lhd , Hex Head Bolt Part Nostdb035-08-100 Model 912Lhd , Hex Nut, Nyloc Part Nomt12ln Model 912Lhd , Bonded Seal Part Nosc011/013 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/003 Model 912Lhd , Straight Adaptor Part Nose024/211 Model 912Lhd , Hex Head Bolt Part Not8gg20 Model 912Lhd , Bonded Seal Part Nosc011/006 Model 912Lhd , Straight Adaptor, M/M Part Nose012/082 Model 912Lhd , Reducer, M/M Part Nose012/093 Model 912Lhd , Hose Assembly Part No623d02584/309 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/046 Model 912Lhd , Manifold Block Part No910a050000021 Model 912Lhd , Manifold Block Part Noeea0031939 Model 912Lhd , Solenoid Cartridge Part Noeea0030276 Model 912Lhd , Check Cartridge Part Noeea0030277 Model 912Lhd , Straight Adaptor Part Novu6f12e16as Model 912Lhd , Straight Adaptor Part Nose024/218 Model 912Lhd , Elbow 90 Degree Part Novu8f8e21bs Model 912Lhd , Hose Assy. Part Nostdd026/112 Model 912Lhd , Hose Assy. Part Nostdd026/092 Model 912Lhd , Straight Adaptor Part Nose024/203 Model 912Lhd , Check Valve Part No77728871 Model 912Lhd , Check Valve Part No625a050000111 Model 912Lhd , Swivel Nut Elbow Part Novu16f16e21cs Model 912Lhd , Hyd. Cooler Group Part No912c070000280 Model 912Lhd , Hyd. Pump Part No912b050000358 Model 912Lhd , Gasket Part No907a050000047 Model 912Lhd , Straight Adaptor, M/M Part Nose012/087 Model 912Lhd , Hose Assembly Part No623d02584/400 Model 912Lhd , Reducer, M/M Part Nose012/097 Model 912Lhd , Bonded Seal Part Nosc011/019 Model 912Lhd , Hose Assembly Part No623d02584/175 Model 912Lhd , Hose Assy. Part Nostdd033/041 Model 912Lhd , Hose Assy. Part Nostdd026/314 Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/023 Model 912Lhd , Hose Assy. Part Nostdd026/321 Model 912Lhd , Tee M/M/M Part Nose012/132 Model 912Lhd , Straight Adaptor, M/M Part Nose012/083 Model 912Lhd , Hose Assy. Part Nostdd026/326 Model 912Lhd , Bushing Part Nobp7bb6 Model 912Lhd , Elbow Street, 45 Degree M/F Part Nobp7blc Model 912Lhd , Nipple Part Nobp7fn32 Model 912Lhd , Straight Adaptor, M/M Part Nose012/086 Model 912Lhd , Electric Group Part No912a040000218 Model 912Lhd , 7 Display Part No910b040000044 Model 912Lhd , Connector Kit(Pv780) Part No910a040000045 Model 912Lhd , Starting Switch Part No19wl040000073 Model 912Lhd , Emergency Stop Control Station Part Noeea0028455 Model 912Lhd , Emergency Stop Marker Part Noeea0029991 Model 912Lhd , Emergency Stop Push Button Part Noeea0022291 Model 912Lhd , Timer Part Noeea0020754 Model 912Lhd , Relay Module Part Noepra040000007 Model 912Lhd , Buzzer 24V Dc Part No19wl040000084 Model 912Lhd , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 912Lhd , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 912Lhd , Cable End Sleeve Terminal(6 Sq.Mm) Part Noeea0030117 Model 912Lhd , Selector Switch Part Noepra040000001 Model 912Lhd , Selector Switch (3 Pos.) Part No910a040000014 Model 912Lhd , Mecan1905 Part No907b040000001 Model 912Lhd , Push Button - 3 Position Part No116602 Model 912Lhd , Duel Head Lamp Relay(24V) Part Noeea0030031 Model 912Lhd , Led Work Light,45W,Low Beam Part No917a040000021 Model 912Lhd , Led Work Light,45W,Wide Flood Part No917a040000022 Model 912Lhd , Led Beacon Part No917a040000024 Model 912Lhd , Led Flashing Light(Amber) Part No917a040000023 Model 912Lhd , Led Tail Light Part No907a040000018 Model 912Lhd , Led Work Light(15W) Part Nossla040000019 Model 912Lhd , Paired Horn Part No919a002910934 Model 912Lhd , Circuit Breaker, 32A Part Noeea0024825 Model 912Lhd , Circuit Breaker, 6A Part No19wl871050265 Model 912Lhd , Circuit Breaker,10A Part No19wl871050023 Model 912Lhd , Circuit Breaker, 16A Part Noeea0025390 Model 912Lhd , Hyd. Oil Temp Sensor Part No917a040000006 Model 912Lhd , Capacitance Oil Level Switch Part No917a040000026 Model 912Lhd , Multicore Control Cable(2X1.5) Part No907a040000024 Model 912Lhd , Multicore Control Cable(4X1.5) Part No907a040000025 Model 912Lhd , Multicore Control Cable(7X2.5) Part No907a040000022 Model 912Lhd , Multicore Control Cable(18X2.5) Part No907a040000023 Model 912Lhd , Multicore Control Cable For Rc Part No912a040000157 Model 912Lhd , Can Bus Cable Part No907a040000012 Model 912Lhd , Solenoid Connector(Led) Part Noeea0029713 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Pink Part Noeea0025274 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Blue Part Noeea0025275 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Yellow Part Noeea0025276 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Green Part Noeea0025277 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Violet Part Noeea0025278 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Red Part Noeea0025279 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Grey Part Noeea0025280 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, White Part Noeea0025281 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Black Part Noeea0025282 Model 912Lhd , Flexible Wire, 2.5 Sq.Mm, Red Part Noeea0025283 Model 912Lhd , Flexible Wire, 6 Sq.Mm, Red Part Noeea0025285 Model 912Lhd , Multi-Level Terminal Part Noeea0029579 Model 912Lhd , Terminal Block(Black) Part Noeea0029389 Model 912Lhd , Terminal End Plate Part Noeea0022455 Model 912Lhd , End Clamps Part Noeea0021276 Model 912Lhd , Terminal Block Part Noeea0028566 Model 912Lhd , Terminal Block(Kut10,Yellow) Part Noeea0029453 Model 912Lhd , Terminal Block(Kut10,Green) Part Noeea0029454 Model 912Lhd , End Plate Part Noeea0028567 Model 912Lhd , Mounting Din Rail Part Noeea0022456 Model 912Lhd , Pressure Switch Part No103483 Model 912Lhd , Reversing Alarm Part Noeea0022223 Model 912Lhd , Interior Light Part No910a040000029 Model 912Lhd , Multicore Control Cable(14X1.5) Part No910a040000043 Model 912Lhd , Flashing Led,Red Part No912a040000216 Model 912Lhd , Contact Block(No) Part Noeea0027986 Model 912Lhd , Contact Block(Nc) Part Noeea0027987 Model 912Lhd , On Delay Timer (Crouzet) Part No910a040000059 Model 912Lhd , Tyre Assy (12X24, Tl) Part No912b070000389 Model 912Lhd , Wheel Rim (M/C) Part No912b020000834 Model 912Lhd , Tyre (12X24), Tl Part No912b050000360 Model 912Lhd , Valve Assy (Tl) Part No912b050000367 Model 912Lhd , Cover & Guard Group Part No912b070000397 Model 912Lhd , Support Bracket Part No912a020000874 Model 912Lhd , Hex Head Bolt Part Nostdb035-20-60 Model 912Lhd , Hex Nut Part No369-0120 Model 912Lhd , Bracket Assy Part No912a020000883 Model 912Lhd , Plate Assy Part No912a020000890 Model 912Lhd , Cover Assy Part No912a020000862 Model 912Lhd , Spring Washer Part Nomdw12sa Model 912Lhd , Flat Washer Part Nomaw10gag Model 912Lhd , Hex Head Bolt Part Nostdb035-10-20 Model 912Lhd , Decal, Transmission Oil Part No912a050000297 Model 912Lhd , Pressure Checking Unit Part No150a050000036 Model 912Lhd , Air Nozzle Part No912a050000147 Model 912Lhd , Misc. Group Part No912a070000399 Model 912Lhd , Fire Extinguisher Part No625a050000110 Model 912Lhd , Drive Screw Part Not1000 Model 912Lhd , Trans. Oil Part No00ea000001198 Model 912Lhd , Hydraulic Oil Part Nod10a050000093 Model 912Lhd , Gear Oil(Axle&Transfer Case) Part No115575 Model 912Lhd , Engine Coolant Part No912a050000375 Model 912Lhd , Engine Oil Part No912a050000376 Model 912Lhd , Centralised Lubrication System (Automatic) Part No917b050000022 Model 912Lhd , Automatic Fire Suprression System Part No907a070000027 Model 912Lhd , Automatic Fire Detection & Supression System Part No19wl050000868 Model 912Lhd , Bracket (Fire System) Part No19wl020000733 Model 912Lhd , Threaded Boss Part No811a020000105 Model 912Lhd , Hex Head Screw Part Nomt08lg16g Model 912Lhd , Spring Washer Part Nomdw08sag Model 912Lhd , Hex Nut Part Nomt08lgg Model 912Lhd , Accumulator Charging Kit Part No811a050000124 Model 912Lhd , Electrical Tools Part No907a050000049 Model 912Lhd , Single Core Wire Rubber Bidding Part Nod06a050000189 Model 912Lhd , Logo-Eimco Elecon(Engine Hood) Part No12wl050000047 Model 912Lhd , Fastner Sealant Part No00ea000001155 Model 912Lhd , Hand Pump Part No917a050000106 Model 912Lhd , E.M Tyre Inflating & Checking Device Lb Part No907a050000064 Model 912Lhd , O Ring Kit Part No917a050000113 Model 912Lhd , Wheel Chock Part No822b050000102 Model 912Lhd , Water In Fuel Sensor Part Noeea0035123 Model 912Lhd , Low Fuel Pressure Sensor Part Noeea0035124 Model 912Lhd , Fuel Supply Pump Part Noeea0035125 Model 912Lhd , Common Rail Repair Kit Part Noeea0035126 Model 912Lhd , Boost Pressure Sensor Part Noeea0035127 Model 912Lhd , Control Unit (Ecu) Part Noeea0035128 Model 912Lhd , Temprature Sensor Part Noeea0035129 Model 912Lhd , Starter Motor Part Noeea0035130 Model 912Lhd , Alternator Part Noeea0035131 Model 912Lhd , Colant Level Switch Part Noeea0035132 Model 912Lhd , Accelerator Pedal Part Noeea0035133 Model 912Lhd , Cranck Shaft Sensor/Cam Shaft Sensor Part Noeea0035134 Model 912Lhd , Oil Pressure Sensor Part Noeea0035135 Model 912Lhd , V-Ribbed Belt Part Noeea0035137 Model 912Lhd , Turbocharger Oil Return Gasket Part Noeea0035140 Model 912Lhd , Turbocharger Gasket Part Noeea0035141 Model 912Lhd , Coupling Part Noeea0034760 Model 912Lhd , Spin-On Oil Filter Part Noeea0030669 Model 912Lhd , Pre Fuel Filter Part Noeea0030670 Model 912Lhd , Spin-On Fuel Filt. Part Noeea0030671 Model 912Lhd , Air Filter Outer Part Noeea0030675 Model 912Lhd , Air Filter Inner Part Noeea0030676 Model 912Lhd , Suction Strainer (40 Mesh) Part No625b050000122 Model 912Lhd , Axle Oil Part No12wl050000144 Model 912Lhd , Belt Tensioner Part Noeea0035138 Model 912Lhd , Turbocharger Part Noeea0035139 Model 912Lhd , Plate Intermediate Part Noeea0005576 Model 912Lhd , Drive Shaft Part Noeea0005555 Model 912Lhd , Axle Bolt Part No912a060000124 Model 912Lhd , Axle Bolt Part No811a060000121 Model 912Lhd , Axle Bolt Part No912a060000140 Model 912Lhd , Pinion Nut Part Noeea0012870 Model 912Lhd , Pilot Bearing Part Noeea0005605 Model 912Lhd , Bearing Set Part Noeea0010499 Model 912Lhd , D/L Assy Part No912b050000205 Model 912Lhd , Wheel Stud Part Noeea0013320 Model 912Lhd , Wheel Nut Part Noeea0005573 Model 912Lhd , Link Assy Part No912m100000250 Model 912Lhd , Pilot Valve Part No912b050000098 Model 912Lhd , Spider Assy Part No811m100000417 Model 912Lhd , High Block Spider Assy Part No912m100000348 Model 912Lhd , Service Brake Cylinder Assy Part Noeea0013682 Model 912Lhd , Tank Relief Cartridge Part No613m000001081 Model 912Lhd , Bearing Set Part Noeea0010500 Model 912Lhd , Oil Seal Part Noeea0005558 Model 912Lhd , Oil Seal Part Noeea0005584 Model 912Lhd , Middle Plate Part Noeea0005577 Model 912Lhd , Spiral Beval Wheel Part Noeea0005590 Model 912Lhd , Drive Line Assy Part No912m100000365 Model 912Lhd , Drive Line Assy Part No912b050000218 Model 912Lhd , Coolant Pump Part Noeea0035136 Model 912Lhd , Combination Air Filter Part Noeea0035424 Model 912Lhd , Gasket For Exhaust Manifold Part Noeea0035849c Model 912Lhd , Connecting Line (Engine-Ecu Harness) Part Noeea0035854c Model 912Lhd , Valve Mechan.Cover Part Noeea0035831c Model 912Lhd , Gasket For Tappet Cover Part Noeea0035828c Model 912Lhd , Screw/Bolt For Tappet Cover Part Noeea0035829c Model 912Lhd , Gasketfor Breathing Line In Tappet Cover Part Noeea0035830c Model 912Lhd , Pipe Clamp Part Noeea0035790c Model 912Lhd , Intake Pipe Part Noeea0035791c Model 912Lhd , Spring Band Clamp Part Noeea0035792c Model 912Lhd , Pre Fuel Filter Part Noeea0026786 Model 912Lhd
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
16.
Housing Urban and Rular Development #10023544 AOC
Construction And Installation Of Various Items For Government Buildings, In The State Of Goa To Create Barrier- Free Environment For Persons With Disabilities (South Goa). (Re-Tender)-SS Studs with carborundum insert of approved colourProviding and fixing SS-304 studs of the approved brand and make, having 35mm dia. and 5mm thickness and a 12 mm long cylindrical plug of 7mm dia. at the centre of the rear side of the stud and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 2 SS Strips with carborundum insert of approved colourProviding and fixing SS-304 strips of the approved brand and make, of size 280mm x 35mm and 5mm thickness and having minimum 3 nos. 12 mm long cylindrical plugs having 7mm dia. located on the rear side of the strip and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 3 PU Warning Tiles :Providing and fixing in place 300 mm x 300 mm polyurethane stick on tactilewarning tiles with provision for screwing at corenrs with matching colour screw cap , having beveled edges and tactile elements protruding by 5mm from the base of the tile. The tiles should be of the approved brand, make and colour and be fixed inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and as per the installation instructionsgiven by the manufacturer complete 4 PU Directional tilesPolyurethane stripsof Barrierfree/ equivalent brand of size 300 mm x 300 mm and 5mm thickness with proision for screwing at 4 corners with matching colour cap. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner)/proprietary self adhesive tape including finishing work up to the satisfaction of the engineer in charge complete. 5 Providing a S.S. 304 SWING GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm, of the approved brand and make and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 6 ProvidingS.S. 304 L SHAPED GRAB BAR of SIZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness 1.5mm, of the approved brand and make andto be installed at the specified location as per accessibility standards and to be fixed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware as per the direction of the engineer in charge 7 Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm, of the approved brand and make, to be installed vertically at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 8 Parking SignageDesign, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the Universal Accessibility Symbol and Upper case Sans Serif words ofheight 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm.Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge. 9 Building entrance and Accessible entrance signageDesign, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the Universal Accessibility Symbol and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 10 Acrylic tactile audio mapDesign, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuildinglayout of size 2ft x 1.5ft min., of the approved design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of height not less than 12mm, with the equivalent word/s written in Hindi with acrylic cut out Devnagri letters of height not less than 12mm,raised 1 to 2mm above base plate and of the approved colour such that there is adequate visual contrast with the base plate. A multilingual audio indicating the names of the relevant spaces to be triggered on pressing the respective button. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 11 Overhanging directional signageDesign, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 12 Overhanging directional signageDesign, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 13 Floor Directories with tactile lettersProviding and fixing acrylic multilingual Braille (raised domes) floor directories on all floors of size 1.5 ft x 2 ft , showing the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having Base plate: 4mm thick blue/ approved colour acrylic non glare Text: Upper Case San Serif words made of white acrylic non glare cut out letters of height 20mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 20mm raised 0.8mm above base plate. Symbols: Signage to have relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Arrows: Signage to have arrows pointing in the relevant direction made of cut out acrylic and raised by 3mm min. above base plateLetters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Braille: Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 14 Emergency Evacuation signage (6 x 9 format)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 emergency exits and evacuation instructions, designed as per the drawings issued and having 4mm thick green/red acrylic non glare base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height not less than 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height not less than 15mm raised 0.8mm above base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 15 FIRE ORDERDesign, supply, fabrication and fixingmultilingual FIRE ORDER signage of size 700mm x 900mm made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet. Signage giving evacuation instructions during fire using black/ red/ green non glareUpper Case Sans Serif words of height not less than 15mm and the equivalent translation written in Hindi using Devnagri non glare black letters of height not less than 15mm , designed as per the drawings issued. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 16 Emergency evacuation map:photoluminiscentProviding and installing an Emergency evacuation map of each floor indicating the current position of the viewer saying YOU ARE HERE of 15mm high letters in red/ green /black with white background, indicating the emergency exits, locations of fire extinguishers etc.Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters not less than 3/4 in height. The size of the board shall be 2ft x 2ft made out of Ecosolvent self adhesive,reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet, complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand shall be oriented to the position of the viewer up to the satisfaction of the engineer in charge. 17 Photoluminescent Fire exit and floor identification signage with Braille: PHOTOLUMINISCENT Fire Exit and floor identification signage of size 400 x 100mm min. made out of computer cut opaque, non reflective, self adhesive vinyle letters, pasted on a self adhesive photoluminiscent film, pasted on 3mm thick PVC foam sheet, having a 2mm acrylic baseplate. Braille strip comprising of Acrylic base plate and PVC rasters to be provide below the signage. Signage to be of the approved colour with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand up to the satisfaction of the engineer in charge. 18 Anodised Aluminium Braille indicators with SS-304 cable fasteners for handrails Providing and fixing 0.5 mm thick Anodised Aluminiumpre rolled signs of size 100mm x 80mm to fit any handrail circumference with hygeinically clean pressed aluminium with no add ons that can be picked off or removed and having the required word written in Grade 1 Braille (raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI) raised by 0.6mm to 0.9mm above base plate. To be installed in place around the handrail using SS-304 cable ties of dimension 7.9mm x 200mm with press fit mechanism. 19 Providing a folding wheelchair of the approved brand and make having chrome steel finish, fixed arm and footrest, solid castor front wheel of 8 dia and rear pneumatic mag wheel of 24 dia, self weight of 17.4 kg and load bearing capacity of 150 kg . Seat width of 16 and overall wheelchair width 24 and 25mm pipe dia. 20 Providing a emergency evacuation chair of approved brand ( Resguardo or equivalent )with a self weight of 16.5 kg and load bearing capacity of 130 kg. The frame of the chair to be made of aluminium powder coated sections of 32 mm outer dis and 3 mm thickness. 21 Door signage : 6 x 3 format (without symbols, without text, only Braille)Design, supply, fabrication and fixing acrylicBraille (raised domes) signboards of size 6x 3 for room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 22 Conducting post implementation access audit and submission of post implementation report certified by Access Auditor empanelled under Accessible India Campaign by Ministry of Social Justice and Empowerment, Govt. Of India . The Post implementation access audit report shall comply with the report format under AIC and demonstrate the measures adopted for accessibily of the building which has been retrofitted through sufficient photographic evidences as deemed necessary. 23 Providing and Fixing in position in custom sizes accessible railing system as per design mandated under accessibility norms, fabricated out of modular and non modular components made of Stainless Steel Grade 304. Railing system to be fabricated out of SS pipe of 38 to 50 mm dia for horizontal supports of 16 gauge thickness at two levels of 760 mm and 900 mm with adequte vertical and horizontal supports for stability and safety of persons with disabilities. 24 Modular Unisex Accessible Toilet : Providing and installing in position a prefabricated modular unisex accessible toilet unit of size 2200 x 2100 mm as per accessibility norms fabricated out of SS, GI framing and panelling surfaces along with ACP exterior surafce as per manufacturers specifications inclding all service lines for water supply and drainage. ech Specifications for Prefabricated Accessible Toilet in India1. Structure: Frame: GI (Galvanized Iron), powder-coated for durability, 2mm thickness.Cladding: ACP (Aluminum Composite Panel), 3mm thickness, weather-resistant, available in matte, glossy, or wood finishes.2. Flooring: Anti-slip vinyl or rubber flooring (3mm thickness), water-resistant, slip-resistant, and easy to clean.3. Roof: ACP or insulated roofing panels, weather-resistant, soundproof, and thermal-insulated.4. Doors & Windows: Doors: Minimum 900mm width for wheelchair accessibility. Windows: Frosted glass for privacy, small, strategically placed.5. Accessibility Features: Interior Layout: 1500mm turning radius, wheelchair-friendly. Grab Bars: Stainless steel or powder-coated at appropriate heights.Toilet Seat: Accessible height (450-480mm) with side armrests. Shower Area (Optional): Foldable seat, handheld shower. 25 6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light. 26 7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures. Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m). 27 8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance. 28 9. Sustainability: Eco-friendly, recyclable materials. Energy-efficient features (LED lights, water-saving fixtures). Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors. 29 Providing and installing on all floors a building an audio navigational and wayfinding system of Disha / Iwayplus brand or equivalent based on BLE Beacons and custom app for use on smart phones, integrated with QR codes in designated locations enabled with AR/VR technology as per manufacturers specifications.Cost to include generation of CAD files for as built layouts of all structures. 30 Accessible Modular Ramp : Providing and installing on designatedlocation as per the directions of Engineer In Charge a customised modular ramp of gradient 1:12 gradient 1. Structure:Frame & Support: Fabricated from stainless steel for corrosion resistance and durability, ensuring rust-free performance.Surface: Aluminum components for lightweight, strength, and resistance to corrosion.Design: Modular design for easy installation and adjustments, ensuring flexibility in various environments.2. Ramp Dimensions:Slope: Compliance with accessibility norms – a maximum slope ratio of 1:12 (1 part rise to 12 parts horizontal run).Width: Minimum 900mm to accommodate wheelchairs and mobility devices.Height: Customizable based on the locations requirements (e.g., 1000mm to 1500mm rise).Clearance: A minimum of 150mm clearance at the lowest point. 31 3. Safety Features: Handrails: Stainless steel handrails on both sides, 900mm to 1100mm in height, providing support and stability. Edge Protection: Raised edges (50mm-75mm) on both sides to prevent accidental slipping. Surface Texture: Anti-slip surface treatment on the ramp and handrails for added grip in wet conditions. 32 4. Weather Protection: Cover: A weatherproof cover (e.g., PVC or UV-resistant fabric) to protect the ramp from rain, ensuring its longevity and usability in all weather conditions. Drainage: Integrated drainage system or slotted surface to prevent water pooling. 33 5. Materials & Finish: Material: High-quality stainless steel for the frame, aluminum for surface components. Finish: Powder-coated or brushed stainless steel for a modern aesthetic and added corrosion resistance. Durability: All materials are rust-resistant, ensuring long-term functionality, even in coastal or humid areas. 34 6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light. 35 7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures.Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m). 36 8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance. 37 9. Sustainability: Eco-friendly, recyclable materials.Energy-efficient features (LED lights, water-saving fixtures).Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors 38 roviding a Accessible Help desk manufactured in adherence to accessibility norms made out of 18 mm ply and all surafces finished with solid surface of Corian or equivalent material with all edges rounded and or champfered to avoid sharp edge hazard to any person with disability ( Visual impairment, blood disorders) as per standrad drawing issued by access consultant 39 Supplying a Stair Climber Wheelchair as per manufacturers specifications and accessibility norms Type of stair climbing / descending : Battery operatedMovement on flat ground : self operated by manual push as well as attendantNet weight /gross weight : 40kg / 51kgRequired turning radius on staircase : 40×40 inches / 1×1 meterBattery voltage : 24 VStair climber motor : 120 WPower motor : n/aMax load : 125kgOptimum stair angle : 35 degMotor out put voltage : 20-29.4 VBattery charging voltage :110-240 V
Contract Date: Apr 20, 2026 Contract Value : ₹ 4.10 Crore
Government Departments No of Bidders 2
Goa View Result →
17.
Civil Aviation #9968288 AOC
Bids Are Invited For Supply Of Hot Dip Galvanized Octagonal Street Light Pole Of 7 Mtrs Length - Supply Of Hot Dip Galvanized Octagonal Street Light Pole Of 7 Mtrs Length, 3 Mm Thick Having Minimum 130 Mm Bottom Diameter, 70 Mm Top Diameter With Minimum 200Mm X200mmx12mm Size Base Plate And 4 Nos, 16Mm Dia X 450 Mm Length J Type Foundation Bolts/As Recommended By Oem With Templates And The Pole Should Have Suitable Door Opening At The Bottom, The Door Opening Should Be Reinforced, Water Proofed And With Proper Lock And Key Arrangement And Arrangement Of In Built Junction Box For Terminal Box With Provision For Connecting One Number 6A Dp Mcb And Power Studs Or Connector To Receive Loop In And Out Loop 4 Core Armoured Aluminium Cables Of Size Upto 25 Sq.Mm, Providing M10 Bolt For Earthing Etc. As Required. , Supply Of Outdoor Type 100W Led Type Flood Light Luminaire - Supply Of Outdoor Type 100W Led Type Flood Light Luminaire With 5700K Colour Temperature, Efficiency Of Led Light Fitting Minimum 110Lm/W, Pf Equal To 0.95 Or More, Thd Should Be Less Than 10 Percent , Minimum Ip 65 Protection With Housing Material Made Of High Pressure Die Cast Aluminium Or Standard Alloy Suitable For Outdoor Application With Manufacturer Name/Logo Embossed In The Housing Body Or On Aluminium Plate Etc. Complete As Required, Surge Protection Of Greaterthan4kv, All Prewired Up To Terminal Block And Suitable For Operation On 230 V+/- 10 Percent, 50Hz, Single Phase Ac Supply And As Per Technical Specification With All Its Accessories, Driver Etc. As Complete. , Supply Of Outdoor Type 90W Led Streetlight Luminaire - Supply Of Outdoor Type 90W Led Streetlight Luminaire Having Minimum Output Of 110 Lm/Watt, And Designed With Powder Coated Pressure Die Cast Aluminium Housing, Frame, Integral Driver With Surge Protection Of Greaterthan4kv, Conforming To Ip 65/Ip66 And Ik 07 Protection Etc. Complete As Required. (Led And Power Drive Should Meet The Aai Specifications). , Design, Fabrication, Supply, Installation, Testing And Commissioning Of Cubicle Type, Outdoor Type Feeder Pillar Panel - Design, Fabrication, Supply, Installation, Testing And Commissioning Of Cubicle Type, Totally Enclosed, Double Door With Sloped Roof, Outdoor Type (Ip55 Or Higher), Floor Mounted, Fully Crca Steel Built Feeder Pillar Fabricated In Compartmentalized Design Made Out Of 2.0 Mm Thick Crca Sheet, Duly Powder Coated In Approved Shade Suitable For Operation On 415 V, 3 Phase, 4 Wire, 50 Hz Ac Supply, Tpn Aluminium Busbars Of High Conductivity, Dmc Or Smc Busbar Supports With Bottom Base Channel With Mounting Legs Made Out Of Steel Section Of Not Less Than 3Mm Thickness, Entire Panel Shall Have A Common Copper Earth Bar Of Size 20Mm X 3 Mm At The Rear With 2 Nos. Earth Studs, Solid Connection From Main Busbar To Switchgears With Required Size Of Aluminium Busbar, Control Wiring With Frls Insulated Copper Conductor Cables, Cable Alleys , Cable Gland Plates, Neoprene Gaskets, Terminal Blocks Etc To Accommodate The Following Accessories Etc. Complete As Required. I) Incomer Mccbs - 63 A, Fp, Breaking Capacity Of 25Ka At 415 Volts Mccb (Ics- 100 Percent Icu) With Thermal Magnetic Release Having O Or L And S Or C Protection - 1 Set Ii) Led Phase Indication (R,Y,B) Lamps On And Off Indication Lamps With Control Mcbs And 1.5 Sq.Mm Frls Copper Wiring -01 Set For Incomer. Iii) Outgoing Mccb- 63 A, Fp, Breaking Capacity Of 25Ka At 415 Volts Mccb (Ics- 100 Percent Icu) With Thermal Magnetic Release Having O Or L And S Or C Protection - 1 Set For Future Provision And Extension Of Supply Iv) Outgoing Mcbs - 32 A, 10 Ka, 4P, C Series Mcb - 5 Nos V) Common 4 Pole,100A Capacity Aluminium Busbar. Vi) Single Dial Time Switch With 32A Fp Contactor With 2No+2Nc Auxiliary Contacts For The Automatic Switching Of Street Light Feeders -02 Set Vii) Necessary Internal Control Wiring And Earthing Strip As Per Specifications I/C Providing And Fixing Of Suitable Rail Mounted Terminal Connectors Etc. , Sitc Of Lt Feeder Pillar Panel - Design, Engineering, Fabrication, Supply, Transportation, Installation, Testing And Commissioning Of Double Door Outdoor Type Lt Power Supply Feeder Pillar Of Minimum Ip-54 Protection, Floor Mounted, Dust-Tight And Vermin-Proof, Cubical And Compartmentalized Construction, Suitable For Outdoor Operation. The Feeder Pillar Shall Be Fabricated From High-Quality Crca Sheet Steel Of Minimum 2.0 Mm Thickness For Main Enclosure And Minimum 3.0 Mm Thickness For Gland Plates, Stiffeners And Load-Bearing Members. The Enclosure Shall Be Fabricated With Proper Bends, Welded Joints, Gaskets, Hinged Doors, Padlocking Arrangement And Provision For Cable Entry From Bottom As Per Site Conditions. The Feeder Pillar Shall Be Suitable For Operation On 415 Volts, 3 Phase, 4 Wire, 50 Hz Ac Supply System. The Feeder Pillar Shall Be Complete With Aluminium Bus Bars Of Adequate Size And Cross-Section, Having A Continuous Current Rating Of Minimum 400 Amps For Phase And Neutral, Supported On Suitable Non-Hygroscopic, Heat-Resistant Insulators. Separate Earth Bus Of Suitable Size Shall Be Provided Throughout The Panel Length With Two External Earth Terminals. The Panel Shall Be Provided With Mechanical Interlocking Arrangement For Incomers And Bus Coupler, Three-Lock Two-Key System For Operational Safety, Terminal Blocks For Proper Termination Of Power And Control Cables, Danger Notices, Circuit Identification Labels, And All Necessary Mounting Hardware. Incomer, Bus Bar And Outgoins As Per Soq Mentioned In Tender Document. Refer Tender Document And Schedule Of Quantities (Soq). , Supply Power Cable Of 3.5 X 50 Sq. Mm Sqmm. - Supply Of Xlpe Insulated And Pvc Sheathed Armoured Aluminium Conductor Ug Power Cable Of 1.1 Kv Grade Of Following Sizes Confirming To Is 7098(Part 1 1988) With Upto Date Amendments Etc Complete As Required. 3.5 X 50 Sq. Mm Sqmm. , Supply Of Xlpe Insulated And Pvc Sheathed Armoured Aluminium Conductor Ug Power Cable Of 4 X 16 Sqmm. - Supply Of Xlpe Insulated And Pvc Sheathed Armoured Aluminium Conductor Ug Power Cable Of 1.1 Kv Grade Of Following Sizes Confirming To Is 7098(Part -1/1988) With Upto Date Amendments Etc Complete As Required. 4 X 16 Sqmm. , Supply Of Xlpe Insulated And Pvc Sheathed Armoured Aluminium Conductor Ug Power Cable Of 3.5 X 300 Sqmm. - Supply Of Xlpe Insulated And Pvc Sheathed Armoured Aluminium Conductor Ug Power Cable Of 1.1 Kv Grade Of Following Sizes Confirming To Is 7098 (Part -1/1988) With Upto Date Amendments Etc Complete As Required. 3.5 X 300 Sqmm. , Supply Of 50 Mm Od Hdpe Pipe Of Pe 80 Pn 6 Isi Marked - Supply Of Following Od Hdpe Pipe Of Pe 80 Pn 6 Isi Marked Along With All Accessories Like Hdpe Socket, Bend, Tees, Couplers Etc., Conforming To Is 4984 Complete Etc., As Required. 50 Mm , Supply Of 63 Mm Od Hdpe Pipe Of Pe 80 Pn 6 - Supply Of Following Od Hdpe Pipe Of Pe 80 Pn 6 Isi Marked Along With All Accessories Like Hdpe Socket, Bend, Tees, Couplers Etc., Conforming To Is 4984 Complete Etc., As Required. 63 Mm , Supply Of 110 Mm Od Hdpe Pipe Of Pe 80 Pn 6 - Supply Of Following Od Hdpe Pipe Of Pe 80 Pn 6 Isi Marked Along With All Accessories Like Hdpe Socket, Bend, Tees, Couplers Etc., Conforming To Is 4984 Complete Etc., As Required. 110 Mm , Supply Of Underground Warning Or Caution Tape Size 6 X 250 Mtr - Supply Of Underground Warning Or Caution Tape - Electric Cable Line 6, Made From Polyethylene Tube Type With Printing, Size 6 X 250 Mtr, Color Red, Weight Approx. 3.5 Kg Per Roll Complete As Required. , Supplying And Making End Termination 3.5 X 50 Sq. Mm - Supplying And Making End Termination With Double Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed Or Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3.5 X 50 Sq. Mm (35Mm) , Supplying And Making End Termination 4 X 16 Sq.Mm - Supplying And Making End Termination (W/O Glands ) With Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed/ Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 4 X 16 Sq.Mm , Supplying And Making End Termination 3.5 X 300 Sq. Mm - Supplying And Making End Termination With Double Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed Or Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3.5 X 300 Sq. Mm (70Mm) , Excavation For Cable Trenches In Soft Soil - Excavation For Cable Trenches In Soft Soil, Depth Upto 1.2 M Including Dressing Of Sides Lift Upto 1.5 M, Including Getting Out The Excavated Soil, Refilling With Sand And Or Good Soil After Laying Of Cable/ Pipe Etc And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 Metres. , Laying Of Upto 63 Mm Dia Size Dwc Or Hdpe Pipe - Laying Of Following Size Dwc/Hdpe Pipe Along With All Accessories Like Socket, Bend, Couplers Etc. Complete With Fitting And Cutting, Jointing Etc. Direct In Ground (75 Cm Below Ground Level) In Existing Trench Etc., Complete As Required. Upto 63 Mm Dia , Laying Of 110 Mm Dia Size Dwc Or Hdpe Pipe - Laying Of Following Size Dwc/Hdpe Pipe Along With All Accessories Like Socket, Bend, Couplers Etc. Complete With Fitting And Cutting, Jointing Etc. Direct In Ground (75 Cm Below Ground Level) In Existing Trench Etc., Complete As Required. 110 Mm Dia , Laying Of Cable Up To 35 Sq.Mm In The Existing Rccor Hume Or Duct Or Metal Or Dwc Or Hdpe Pipe As Required. - Laying Of One Number Pvc Insulated And Pvc Sheathed Or Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Duct/ Metal/Dwc/Hdpe Pipe As Required. Up To 35 Sq.Mm , Laying Of Cable Above 35 Sq. Mm And Upto 95 Sq. Mm In The Existing Rccor Hume Or Duct Or Metal Or Dwc Or Hdpe Pipe As Required. - Laying Of One Number Pvc Insulated And Pvc Sheathed Or Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Duct/ Metal/Dwc/Hdpe Pipe As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm , Laying Of Cable Above 185 Sq. Mm And Upto 400 Sq. Mm In The Existing Rccor Hume Or Duct Or Metal Or Dwc Or Hdpe Pipe As Required. - Laying Of One Number Pvc Insulated And Pvc Sheathed Or Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Duct/ Metal/Dwc/Hdpe Pipe As Required. Above 185 Sq. Mm And Upto 400 Sq. Mm , Laying And Fixing Of Cable Above 185 Sq. Mm And Upto 400 Sq. Mm On Wall Surface - Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed Or Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Wall Surface As Required. Above 185 Sq. Mm And Upto 400 Sq. Mm (Clamped With 40X3mm Ms Flat Clamp) , Supplying And Making Of Straight Through Joint With Heat Shrinkable Kit 3.5 X 300 Sq. Mm - Supplying And Making Of Straight Through Joint With Heat Shrinkable Kit Including Ferrules And Other Jointing Materials For The Following Size Of Pvc Insulated And Pvc Sheathed Or Xlpe Aluminium Conductor Cable Of 1.1Kv Grade As Required. 3.5 X 300 Sq. Mm , Dismantling Bituminous Road By Manually Or Mechanical - Dismantling Bituminous Road By Manually/ Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge And Providing And Laying In Position Cement Concrete 1.2.4 (1 Cement . 2 Coarse Sand .4 Graded Stone Aggregate 20 Mm Nominal Size) Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level Including Form Work Etc As Required. , Supply And Fixing Of Single Arm Bracket Having Arm Length Of 1.2 Mtr - Supply And Fixing Of The Following Size Cross Arm At Top Of Pole, These Cross Arm Shall Be Suitable For Top Of 7 Mtr Pole Including 3 Nos 10Mm Dia Hdg Pinch Bolts, Stiffness Plates Etc. As Required. Single Arm Bracket Having Arm Length Of 1.2 Mtr , Supply And Fixing Of Double Arm Bracket Having Arm Length Of 1.2 Mtr - Supply And Fixing Of The Following Size Cross Arm At Top Of Pole, These Cross Arm Shall Be Suitable For Top Of 7 Mtr Pole Including 3 Nos 10Mm Dia Hdg Pinch Bolts, Stiffness Plates Etc. As Required. Double Arm Bracket Having Arm Length Of 1.2 Mtr , Supply Of Dp Mcb, 6 A, C Curve - Supply Of Miniature Circuit Breaker (Mcb) Having Breaking Capacity Of 10Ka Suitable For Operation On 230V Or 415V, 50 Hz Ac Supply. Dp Mcb, 6 A, C Curve , Supplying 3 Core 1.5 Sqmm Of Frls Pvc Round Sheathed Copper Conductor Industrial Cable - Supplying 3 Core 1.5 Sqmm Of Frls Pvc Round Sheathed Copper Conductor (Flexible) Industrial Cable, 1.1 Kv Grade Conforming To Is 694 Etc As Required. , Erection Of Metallic Pole Upto 7 Mtr Length Including Rcc Foundation - Erection Of Metallic Pole Upto 7 Mtr Length Including Provision Of Rcc Foundation For Erection Of The Metallic Pole (Details Are Mentioned In Item-4) Including Design Of Rcc Foundation With Resistance Capacity Of 296 Km/Hr Wind Speed, By Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete 1.3.6 (1 Cement . 3 Coarse Sand . 6 Graded Stone Aggregate 40 Mm) And Providing Suitable Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In The Foundation Of Minimum Size Of 450 Mm(L) X 450 Mm(W) X 1500 Mm (H) As Per Oem Recommendation Or Vetted Design Including Fixing Of J Bolts And Providing Suitable Size Hdpe/Dwc Pipe In The Foundation For Looping Of Cable, Installation Of Suitable 4 Way Cable Connector For Connecting The Loop In Loop Out Cable Inside The Pole, Fixing Of Departmentally Supplied Mcb, Including Excavation And Refilling Etc. Complete As Required. , Installation, Testing, And Commissioning Of 90W Led Type Street Light Fixture - Installation, Testing, And Commissioning Of 90W Led Type Street Light Fixture On The Existing Street Light Wall Bracket With Nut Bolts, Making Inter Connections From Cable Junction Box To Fitting With Already Supplied 3C X 1.5 Sqmm Pvc Insulated Copper Conductor Cable/Looping Of Fitting At The Top Of Pole If Required As Per Instructions Of Engineer-In-Charge. , Installation, Testing, And Commissioning Of 100W Led Type Flood Light Fixture - Installation, Testing, And Commissioning Of 100W Led Type Flood Light Fixture On The Existing Street Light Wall Bracket With Nut Bolts, Making Inter Connections From Cable Junction Box To Fitting With Already Supplied 3C X 1.5 Sqmm Pvc Insulated Copper Conductor Cable/Looping Of Fitting At The Top Of Pole If Required As Per Instructions Of Engineer-In-Charge. , Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories - Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Frp Cover Plate Of Mini 2.5 Ton Capacity, 18X18 Mini Size And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Providing And Fixing 6 Swg Dia G.I. Wire - Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Including Connection/ Termination With Gi Thimble Etc. As Required. , Providing And Fixing 25 Mm X 5 Mm G.I. Strip In 40 Mm Dia G.I. Pipe - Providing And Fixing 25 Mm X 5 Mm G.I. Strip In 40 Mm Dia G.I. Pipe From Earth Electrode At 0.5 Meter Below The Ground Including Connection With G.I. Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required. , Providing And Laying In Position Cement Concrete - Providing And Laying In Position Cement Concrete 1.2.4 (1 Cement . 2 Coarse Sand . 4 Graded Stone Aggregate 20 Mm Nominal Size) In Foundation Including Form Work Etc As Required. , Dismantling Of Existing Street Light Poles Up To 9 Meters - Dismantling Of Existing Street Light Poles Up To 9 Meters In Height, Including Breaking Of The Concrete Pedestal Or By Removal Of Nuts, Washers, And Other Mounting Accessories Without Causing Any Damage To The Pole. The Scope Also Includes Dismantling Of Led Light Fixtures, Removal Of Cables, Wires, Junction Boxes, And Safe Shifting/Transportation Of The Dismantled Poles To A Designated Location Within A Lead Of 300 Meters. All Works Shall Be Carried Out As Per Site Requirements And Directions Of The Engineer-In-Charge, Including All Labour, Tools, Equipment, And Incidental Charges, Complete In All Respects. , Supply And Erection Of Extra Supporting Ms Structure With L Channel - Supply And Erection Of Extra Supporting Ms Structure With L Channel As Required For Installation Of Flood Light/Street Light Over The Pole Including Cutting, Welding, Fixing In Position And Applying One Coat Of Primer, Two Coats Of Paint Complete As Required. , Laying Of Caution Tape Over The Cable Trench - Laying Of Caution Tape Over The Cable Trench At Approved Depth, Complete As Directed. Total Quantity : 21062
Contract Date: Ref. Documents Contract Value : ₹ 83.13 Lakh
Boards / Undertakings / PSU No of Bidders 5
Tamil Nadu View Result →
18.
Housing Urban and Rular Development #9953219 AOC
Construction and installation of various items for Government buildings in the State of Goa to create a barrier - free environment for persons with disabilities (North Goa), (11 Buildings) Phase II State Budget 2022-23. S.H: Electricity Board Pernem, Government Complex Pernem, Muncipal Council Pernem, Police Station Pernem.-SS Studs with carborundum insert of approved colourProviding and fixing SS-304 studs of the approved brand and make, having 35mm dia. and 5mm thickness and a 12 mm long cylindrical plug of 7mm dia. at the centre of the rear side of the stud and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 2 SS Strips with carborundum insert of approved colourProviding and fixing SS-304 strips of the approved brand and make, of size 280mm x 35mm and 5mm thickness and having minimum 3 Nos.. 12 mm long cylindrical plugs having 7mm dia. located on the rear side of the strip and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 3 PU Warning Tiles :Providing and fixing in place 300 mm x 300 mm polyurethane stick on tactilewarning tiles with provision for screwing at corenrs with matching colour screw cap , having beveled edges and tactile elements protruding by 5mm from the base of the tile. The tiles should be of the approved brand, make and colour and be fixed inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and as per the installation instructionsgiven by the manufacturer complete 4 PU Directional tilesPolyurethane stripsof Barrierfree/ equivalent brand of size 300 mm x 300 mm and 5mm thickness with proision for screwing at 4 corners with matching colour cap. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner)/proprietary self adhesive tape including finishing work up to the satisfaction of the engineer in charge complete. 5 Providing a S.S. 304 SWING GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm, of the approved brand and make and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 6 ProvidingS.S. 304 L SHAPED GRAB BAR of SIZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness 1.5mm, of the approved brand and make andto be installed at the specified location as per accessibility standards and to be fixed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware as per the direction of the engineer in charge 7 Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm, of the approved brand and make, to be installed vertically at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 8 Parking SignageDesign, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the Universal Accessibility Symbol and Upper case Sans Serif words ofheight 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm.Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge. 9 Building entrance and Accessible entrance signageDesign, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the Universal Accessibility Symbol and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 10 Acrylic tactile audio mapDesign, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuildinglayout of size 2ft x 1.5ft min., of the approved design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of height not less than 12mm, with the equivalent word/s written in Hindi with acrylic cut out Devnagri letters of height not less than 12mm,raised 1 to 2mm above base plate and of the approved colour such that there is adequate visual contrast with the base plate. A multilingual audio indicating the names of the relevant spaces to be triggered on pressing the respective button. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 11 Overhanging directional signageDesign, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 12 Door and Directional signage : 6 x 9 format (with symbols / without symbols)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 for directions and room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate with Upper Case San Serif words made of acrylic non glare cut out letters of height 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised 0.8mm above base plate. Signage to have a relevant symbol made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 13 Floor Directories with tactile lettersProviding and fixing acrylic multilingual Braille (raised domes) floor directories on all floors of size 1.5 ft x 2 ft , showing the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having Base plate: 4mm thick blue/ approved colour acrylic non glare Text: Upper Case San Serif words made of white acrylic non glare cut out letters of height 20mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 20mm raised 0.8mm above base plate. Symbols: Signage to have relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Arrows: Signage to have arrows pointing in the relevant direction made of cut out acrylic and raised by 3mm min. above base plateLetters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Braille: Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 14 Emergency Evacuation signage (6 x 9 format)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 emergency exits and evacuation instructions, designed as per the drawings issued and having 4mm thick green/red acrylic non glare base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height not less than 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height not less than 15mm raised 0.8mm above base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 15 FIRE ORDERDesign, supply, fabrication and fixingmultilingual FIRE ORDER signage of size 700mm x 900mm made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet. Signage giving evacuation instructions during fire using black/ red/ green non glareUpper Case Sans Serif words of height not less than 15mm and the equivalent translation written in Hindi using Devnagri non glare black letters of height not less than 15mm , designed as per the drawings issued. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 16 Emergency evacuation map:photoluminiscentProviding and installing an Emergency evacuation map of each floor indicating the current position of the viewer saying YOU ARE HERE of 15mm high letters in red/ green /black with white background, indicating the emergency exits, locations of fire extinguishers etc.Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters not less than 3/4 in height. The size of the board shall be 2ft x 2ft made out of Ecosolvent self adhesive,reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet, complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand shall be oriented to the position of the viewer up to the satisfaction of the engineer in charge. 17 Photoluminescent Fire exit and floor identification signage with Braille: PHOTOLUMINISCENT Fire Exit and floor identification signage of size 400 x 100mm min. made out of computer cut opaque, non reflective, self adhesive vinyle letters, pasted on a self adhesive photoluminiscent film, pasted on 3mm thick PVC foam sheet, having a 2mm acrylic baseplate. Braille strip comprising of Acrylic base plate and PVC rasters to be provide below the signage. Signage to be of the approved colour with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand up to the satisfaction of the engineer in charge. 18 Anodised Aluminium Braille indicators with SS-304 cable fasteners for handrails Providing and fixing 0.5 mm thick Anodised Aluminiumpre rolled signs of size 100mm x 80mm to fit any handrail circumference with hygeinically clean pressed aluminium with no add ons that can be picked off or removed and having the required word written in Grade 1 Braille (raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI) raised by 0.6mm to 0.9mm above base plate. To be installed in place around the handrail using SS-304 cable ties of dimension 7.9mm x 200mm with press fit mechanism. 19 Providing a folding wheelchair of the approved brand and make having chrome steel finish, fixed arm and footrest, solid castor front wheel of 8 dia and rear pneumatic mag wheel of 24 dia, self weight of 17.4 kg and load bearing capacity of 150 kg . Seat width of 16 and overall wheelchair width 24 and 25mm pipe dia. 20 Providing a emergency evacuation chair of approved brand ( Resguardo or equivalent )with a self weight of 16.5 kg and load bearing capacity of 130 kg. The frame of the chair to be made of aluminium powder coated sections of 32 mm outer dis and 3 mm thickness. 21 Door signage : 6 x 3 format (without symbols, without text, only Braille)Design, supply, fabrication and fixing acrylicBraille (raised domes) signboards of size 6x 3 for room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 22 Conducting post implementation access audit and submission of post implementation report certified by Access Auditor empanelled under Accessible India Campaign by Ministry of Social Justice and Empowerment, Govt. Of India . The Post implementation access audit report shall comply with the report format under AIC and demonstrate the measures adopted for accessibily of the building which has been retrofitted through sufficient photographic evidences as deemed necessary. 23 Providing and Fixing in position in custom sizes accessible railing system as per design mandated under accessibility norms, fabricated out of modular and non modular components made of Stainless Steel Grade 304. Railing system to be fabricated out of SS pipe of 38 to 50 mm dia for horizontal supports of 16 gauge thickness at two levels of 760 mm and 900 mm with adequte vertical and horizontal supports for stability and safety of persons with disabilities. 24 Modular Unisex Accessible Toilet : Providing and installing in position a prefabricated modular unisex accessible toilet unit of size 2200 x 2100 mm as per accessibility norms fabricated out of SS, GI framing and panelling surfaces along with ACP exterior surafce as per manufacturers specifications inclding all service lines for water supply and drainage. ech Specifications for Prefabricated Accessible Toilet in India 1. Structure: Frame: GI (Galvanized Iron), powder-coated for durability, 2mm thickness.Cladding: ACP (Aluminum Composite Panel), 3mm thickness, weather-resistant, available in matte, glossy, or wood finishes.2. Flooring: Anti-slip vinyl or rubber flooring (3mm thickness), water-resistant, slip-resistant, and easy to clean.3. Roof: ACP or insulated roofing panels, weather-resistant, soundproof, and thermal-insulated.4. Doors & Windows: Doors: Minimum 900mm width for wheelchair accessibility. Windows: Frosted glass for privacy, small, strategically placed.5. Accessibility Features: Interior Layout: 1500mm turning radius, wheelchair-friendly. Grab Bars: Stainless steel or powder-coated at appropriate heights.Toilet Seat: Accessible height (450-480mm) with side armrests. Shower Area (Optional): Foldable seat, handheld shower.6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light.7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures.Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m).8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance.9. Sustainability: Eco-friendly, recyclable materials.Energy-efficient features (LED lights, water-saving fixtures).Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors. 25 Providing and installing on all floors a building an audio navigational and wayfinding system of Disha / Iwayplus brand or equivalent based on BLE Beacons and custom app for use on smart phones, integrated with QR codes in designated locations enabled with AR/VR technology as per manufacturers specifications.Cost to include generation of CAD files for as built layouts of all structures. 26 Accessible Modular Ramp : Providing and installing on designatedlocation as per the directions of Engineer In Charge a customised modular ramp of gradient 1:12 gradient 1. Structure:Frame & Support: Fabricated from stainless steel for corrosion resistance and durability, ensuring rust-free performance.Surface: Aluminum components for lightweight, strength, and resistance to corrosion.Design: Modular design for easy installation and adjustments, ensuring flexibility in various environments.2. Ramp Dimensions:Slope: Compliance with accessibility norms – a maximum slope ratio of 1:12 (1 part rise to 12 parts horizontal run).Width: Minimum 900mm to accommodate wheelchairs and mobility devices.Height: Customizable based on the locations requirements (e.g., 1000mm to 1500mm rise).Clearance: A minimum of 150mm clearance at the lowest point.3. Safety Features:Handrails: Stainless steel handrails on both sides, 900mm to 1100mm in height, providing support and stability.Edge Protection: Raised edges (50mm-75mm) on both sides to prevent accidental slipping.Surface Texture: Anti-slip surface treatment on the ramp and handrails for added grip in wet conditions.4. Weather Protection:Cover: A weatherproof cover (e.g., PVC or UV-resistant fabric) to protect the ramp from rain, ensuring its longevity and usability in all weather conditions.Drainage: Integrated drainage system or slotted surface to prevent water pooling.5. Materials & Finish:Material: High-quality stainless steel for the frame, aluminum for surface components.Finish: Powder-coated or brushed stainless steel for a modern aesthetic and added corrosion resistance.Durability: All materials are rust-resistant, ensuring long-term functionality, even in coastal or humid areas.6. Compliance:Accessibility Standards: Complies with the National Building Code of India (NBC) and International Accessibility Guidelines (e.g., ADA – Americans with Disabilities Act) for ramps.Load-bearing: Designed to support a minimum load of 300kg (to accommodate users and attendants).7. Maintenance:Low Maintenance: The stainless steel and aluminum components require minimal upkeep, with a periodic cleaning schedule.Corrosion Protection: Stainless steel and aluminum components treated to prevent rust and degradation in all environmental conditions.8. Installation & Assembly:Modular parts for quick and easy assembly on-site.Designed for ease of installation, with pre-fabricated components that can be bolted or welded together as needed. 27 Providing a Accessible Help desk manufactured in adherence to accessibility norms made out of 18 mm ply and all surafces finished with solid surface of Corian or equivalent material with all edges rounded and or champfered to avoid sharp edge hazard to any person with disability ( Visual impairment, blood disorders) as per standrad drawing issued by access consultant 28 Supplying a Stair Climber Wheelchair as per manufacturers specifications and accessibility norms Type of stair climbing / descending : Battery operatedMovement on flat ground : self operated by manual push as well as attendantNet weight /gross weight : 40kg / 51kgRequired turning radius on staircase : 40×40 inches / 1×1 meterBattery voltage : 24 VStair climber motor : 120 WPower motor : n/aMax load : 125kgOptimum stair angle : 35 degMotor out put voltage : 20-29.4 VBattery charging voltage :110-240 V
Contract Date: Apr 08, 2026 Contract Value : ₹ 1.13 Crore
Government Departments No of Bidders 1
Goa View Result →
19.
Housing Urban and Rular Development #9793897 AOC
Construction N Installation Of Various Items For Govt Bldg In The State Of Goa To Create A Barrier Free Env For Persons With Disabilities (Ng), (11 Bdg) Phaseiistate Budget 22-23S.H Muncipal Council Mapusa, Asilo Hospital, Govt.Complex Mapusa.-SS Studs with carborundum insert of approved colourProviding and fixing SS-304 studs of the approved brand and make, having 35mm dia. and 5mm thickness and a 12 mm long cylindrical plug of 7mm dia. at the centre of the rear side of the stud and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 2 SS Strips with carborundum insert of approved colourProviding and fixing SS-304 strips of the approved brand and make, of size 280mm x 35mm and 5mm thickness and having minimum 3 Nos.. 12 mm long cylindrical plugs having 7mm dia. located on the rear side of the strip and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 3 PU Warning Tiles :Providing and fixing in place 300 mm x 300 mm polyurethane stick on tactilewarning tiles with provision for screwing at corenrs with matching colour screw cap , having beveled edges and tactile elements protruding by 5mm from the base of the tile. The tiles should be of the approved brand, make and colour and be fixed inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and as per the installation instructionsgiven by the manufacturer complete 4 PU Directional tilesPolyurethane stripsof Barrierfree/ equivalent brand of size 300 mm x 300 mm and 5mm thickness with proision for screwing at 4 corners with matching colour cap. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner)/proprietary self adhesive tape including finishing work up to the satisfaction of the engineer in charge complete. 5 Providing a S.S. 304 SWING GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm, of the approved brand and make and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 6 ProvidingS.S. 304 L SHAPED GRAB BAR of SIZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness 1.5mm, of the approved brand and make andto be installed at the specified location as per accessibility standards and to be fixed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware as per the direction of the engineer in charge 7 Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm, of the approved brand and make, to be installed vertically at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 8 Parking SignageDesign, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the Universal Accessibility Symbol and Upper case Sans Serif words ofheight 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm.Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge. 9 Building entrance and Accessible entrance signageDesign, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the Universal Accessibility Symbol and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 10 Acrylic tactile audio mapDesign, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuildinglayout of size 2ft x 1.5ft min., of the approved design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of height not less than 12mm, with the equivalent word/s written in Hindi with acrylic cut out Devnagri letters of height not less than 12mm,raised 1 to 2mm above base plate and of the approved colour such that there is adequate visual contrast with the base plate. A multilingual audio indicating the names of the relevant spaces to be triggered on pressing the respective button. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 11 Overhanging directional signageDesign, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 12 Door and Directional signage : 6 x 9 format (with symbols / without symbols)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 for directions and room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate with Upper Case San Serif words made of acrylic non glare cut out letters of height 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised 0.8mm above base plate. Signage to have a relevant symbol made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 13 Floor Directories with tactile lettersProviding and fixing acrylic multilingual Braille (raised domes) floor directories on all floors of size 1.5 ft x 2 ft , showing the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having Base plate: 4mm thick blue/ approved colour acrylic non glare Text: Upper Case San Serif words made of white acrylic non glare cut out letters of height 20mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 20mm raised 0.8mm above base plate. Symbols: Signage to have relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Arrows: Signage to have arrows pointing in the relevant direction made of cut out acrylic and raised by 3mm min. above base plateLetters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Braille: Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 14 Emergency Evacuation signage (6 x 9 format)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 emergency exits and evacuation instructions, designed as per the drawings issued and having 4mm thick green/red acrylic non glare base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height not less than 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height not less than 15mm raised 0.8mm above base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 15 FIRE ORDERDesign, supply, fabrication and fixingmultilingual FIRE ORDER signage of size 700mm x 900mm made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet. Signage giving evacuation instructions during fire using black/ red/ green non glareUpper Case Sans Serif words of height not less than 15mm and the equivalent translation written in Hindi using Devnagri non glare black letters of height not less than 15mm , designed as per the drawings issued. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 16 Emergency evacuation map:photoluminiscentProviding and installing an Emergency evacuation map of each floor indicating the current position of the viewer saying YOU ARE HERE of 15mm high letters in red/ green /black with white background, indicating the emergency exits, locations of fire extinguishers etc.Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters not less than 3/4 in height. The size of the board shall be 2ft x 2ft made out of Ecosolvent self adhesive,reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet, complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand shall be oriented to the position of the viewer up to the satisfaction of the engineer in charge. 17 Photoluminescent Fire exit and floor identification signage with Braille: PHOTOLUMINISCENT Fire Exit and floor identification signage of size 400 x 100mm min. made out of computer cut opaque, non reflective, self adhesive vinyle letters, pasted on a self adhesive photoluminiscent film, pasted on 3mm thick PVC foam sheet, having a 2mm acrylic baseplate. Braille strip comprising of Acrylic base plate and PVC rasters to be provide below the signage. Signage to be of the approved colour with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand up to the satisfaction of the engineer in charge. 18 Anodised Aluminium Braille indicators with SS-304 cable fasteners for handrails Providing and fixing 0.5 mm thick Anodised Aluminiumpre rolled signs of size 100mm x 80mm to fit any handrail circumference with hygeinically clean pressed aluminium with no add ons that can be picked off or removed and having the required word written in Grade 1 Braille (raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI) raised by 0.6mm to 0.9mm above base plate. To be installed in place around the handrail using SS-304 cable ties of dimension 7.9mm x 200mm with press fit mechanism. 19 Providing a folding wheelchair of the approved brand and make having chrome steel finish, fixed arm and footrest, solid castor front wheel of 8 dia and rear pneumatic mag wheel of 24 dia, self weight of 17.4 kg and load bearing capacity of 150 kg . Seat width of 16 and overall wheelchair width 24 and 25mm pipe dia. 20 Providing a emergency evacuation chair of approved brand ( Resguardo or equivalent )with a self weight of 16.5 kg and load bearing capacity of 130 kg. The frame of the chair to be made of aluminium powder coated sections of 32 mm outer dis and 3 mm thickness. 21 Door signage : 6 x 3 format (without symbols, without text, only Braille)Design, supply, fabrication and fixing acrylicBraille (raised domes) signboards of size 6x 3 for room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 22 Conducting post implementation access audit and submission of post implementation report certified by Access Auditor empanelled under Accessible India Campaign by Ministry of Social Justice and Empowerment, Govt. Of India . The Post implementation access audit report shall comply with the report format under AIC and demonstrate the measures adopted for accessibily of the building which has been retrofitted through sufficient photographic evidences as deemed necessary. 23 Providing and Fixing in position in custom sizes accessible railing system as per design mandated under accessibility norms, fabricated out of modular and non modular components made of Stainless Steel Grade 304. Railing system to be fabricated out of SS pipe of 38 to 50 mm dia for horizontal supports of 16 gauge thickness at two levels of 760 mm and 900 mm with adequte vertical and horizontal supports for stability and safety of persons with disabilities. 24 Modular Unisex Accessible Toilet : Providing and installing in position a prefabricated modular unisex accessible toilet unit of size 2200 x 2100 mm as per accessibility norms fabricated out of SS, GI framing and panelling surfaces along with ACP exterior surafce as per manufacturers specifications inclding all service lines for water supply and drainage. ech Specifications for Prefabricated Accessible Toilet in India 1. Structure: Frame: GI (Galvanized Iron), powder-coated for durability, 2mm thickness.Cladding: ACP (Aluminum Composite Panel), 3mm thickness, weather-resistant, available in matte, glossy, or wood finishes.2. Flooring: Anti-slip vinyl or rubber flooring (3mm thickness), water-resistant, slip-resistant, and easy to clean.3. Roof: ACP or insulated roofing panels, weather-resistant, soundproof, and thermal-insulated.4. Doors & Windows: Doors: Minimum 900mm width for wheelchair accessibility. Windows: Frosted glass for privacy, small, strategically placed.5. Accessibility Features: Interior Layout: 1500mm turning radius, wheelchair-friendly. Grab Bars: Stainless steel or powder-coated at appropriate heights.Toilet Seat: Accessible height (450-480mm) with side armrests. Shower Area (Optional): Foldable seat, handheld shower.6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light.7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures.Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m).8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance.9. Sustainability: Eco-friendly, recyclable materials.Energy-efficient features (LED lights, water-saving fixtures).Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors. 25 Providing and installing on all floors a building an audio navigational and wayfinding system of Disha / Iwayplus brand or equivalent based on BLE Beacons and custom app for use on smart phones, integrated with QR codes in designated locations enabled with AR/VR technology as per manufacturers specifications.Cost to include generation of CAD files for as built layouts of all structures. 26 Accessible Modular Ramp : Providing and installing on designatedlocation as per the directions of Engineer In Charge a customised modular ramp of gradient 1:12 gradient 1. Structure:Frame & Support: Fabricated from stainless steel for corrosion resistance and durability, ensuring rust-free performance.Surface: Aluminum components for lightweight, strength, and resistance to corrosion.Design: Modular design for easy installation and adjustments, ensuring flexibility in various environments.2. Ramp Dimensions:Slope: Compliance with accessibility norms – a maximum slope ratio of 1:12 (1 part rise to 12 parts horizontal run).Width: Minimum 900mm to accommodate wheelchairs and mobility devices.Height: Customizable based on the locations requirements (e.g., 1000mm to 1500mm rise).Clearance: A minimum of 150mm clearance at the lowest point.3. Safety Features:Handrails: Stainless steel handrails on both sides, 900mm to 1100mm in height, providing support and stability.Edge Protection: Raised edges (50mm-75mm) on both sides to prevent accidental slipping.Surface Texture: Anti-slip surface treatment on the ramp and handrails for added grip in wet conditions.4. Weather Protection:Cover: A weatherproof cover (e.g., PVC or UV-resistant fabric) to protect the ramp from rain, ensuring its longevity and usability in all weather conditions.Drainage: Integrated drainage system or slotted surface to prevent water pooling.5. Materials & Finish:Material: High-quality stainless steel for the frame, aluminum for surface components.Finish: Powder-coated or brushed stainless steel for a modern aesthetic and added corrosion resistance.Durability: All materials are rust-resistant, ensuring long-term functionality, even in coastal or humid areas.6. Compliance:Accessibility Standards: Complies with the National Building Code of India (NBC) and International Accessibility Guidelines (e.g., ADA – Americans with Disabilities Act) for ramps.Load-bearing: Designed to support a minimum load of 300kg (to accommodate users and attendants).7. Maintenance:Low Maintenance: The stainless steel and aluminum components require minimal upkeep, with a periodic cleaning schedule.Corrosion Protection: Stainless steel and aluminum components treated to prevent rust and degradation in all environmental conditions.8. Installation & Assembly:Modular parts for quick and easy assembly on-site.Designed for ease of installation, with pre-fabricated components that can be bolted or welded together as needed. 27 Providing a Accessible Help desk manufactured in adherence to accessibility norms made out of 18 mm ply and all surafces finished with solid surface of Corian or equivalent material with all edges rounded and or champfered to avoid sharp edge hazard to any person with disability ( Visual impairment, blood disorders) as per standrad drawing issued by access consultant 28 Supplying a Stair Climber Wheelchair as per manufacturers specifications and accessibility norms Type of stair climbing / descending : Battery operatedMovement on flat ground : self operated by manual push as well as attendantNet weight /gross weight : 40kg / 51kgRequired turning radius on staircase : 40×40 inches / 1×1 meterBattery voltage : 24 VStair climber motor : 120 WPower motor : n/aMax load : 125kgOptimum stair angle : 35 degMotor out put voltage : 20-29.4 VBattery charging voltage :110-240 V
Contract Date: Mar 13, 2026 Contract Value : ₹ 1.05 Crore
Government Departments No of Bidders 1
Goa View Result →
20.
Heavy Industries and Public Enterprises #9706820 AOC
Bids Are Invited For Supply, installation, commissioning, training & prove out of Automatic Fire Detection & Informer system and Suppression system at the following locations of HAL Engine Division, BangaloreLocation-1: Stores-E29, E34, E48, E55. Location-2: Stores- E30, E64.Location-3: Stores-E40, E43Location-4: DR Room (IT server Room), Adour MK 871 Final assembly. (Automatic Detection & FireSuppression System) Total Quantity : A Location-1: Stores-E29, E34, E48, E55 Engine Division, HAL, Bangalore SL. No. Description 1 Supply of 4 Zone Conventional panel with Battery Backup 2 Supply of Conventional Multi sensor (Smoke + Heat) Detectors 3 Supply of Conventional Manual Call Point 4 Supply of Conventional Hooter Cum Flasher 5 Supply of 2 x 1.5 sq.mm Armoured Copper Cable FRLS Red Colour as per IS Standards. 6 Supply of 25mm dia Casing and Capping. 7 Installation and Commissioning 8 Any other itmes required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.) B Location-2: Stores- E30, E64 Engine Division, HAL, Bangalore 1 Supply of 4 Zone Conventional panel with Battery Backup 2 Supply of Conventional Multi sensor (Smoke + Heat) Detectors 3 Supply of Conventional Manual Call Point Technical Specification for Installation of Automatic Fire Detection & Informer System SN Description 4 Supply of Conventional Hooter Cum Flasher 5 Supply of 2 x 1.5 sq.mm Armoured Copper Cable FRLS Red Colour as per IS Standards, 6 Supply of 25mm dia Casing and Capping. 7 Installation and Commissioning 8 Any other items required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.) C Location-3: E40, E43 Engine Division, HAL, Bangalore 1 Supply of 4 Zone Conventional panel with Battery Backup 2 Supply of Conventional Multi sensor (Smoke + Heat) Detectors 3 Supply of beam type Smoke Detectors 4 Supply of Conventional Manual Call Point 5 Supply of Conventional Hooter Cum Flasher 6 Supply of 2 x 1.5 sq.mm Armoured Copper Cable FRLS Red Colour as per IS 7 Supply of 25mm Dia casing & capping. 8 Installation and Commissioning Charges 9 Any other items required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.) Technical Specification of Clean agent Fire Suppression system for “DR Room” of Engine Division D Location-4: DR Room (IT server Room), Adour MK 871 final assembly, Engine Division, HAL, Bangalore 1 Supply of 80 Litters water capacity seamless cylinder with Valve for filling clean Agent Gas with CCOE/PESO approval 2 Clean Agent Gas 1,1,1,2,2,4,5,5,5-Nonafluoro-4-(trifluoromethyl)3-pentanone. 3 Master Cylinder Accessories: Electric Control Head, 24 V DCDischarge Hose, 2 x 31 4 Discharge Nozzles 5 Schedule 80 Seamless Pipe & manifold with necessary fitting, supports etc., 6 Cylinder Low Gas alert Monitoring System Electronic Display Type with Load Cell and ON & OFF Switchfacility each unit. (Bottom Flat type unit. 7 Control panel LCD Touch Screen for Low Gas alert Monitoring System. 8 12 Volts DC SMPS Power Supply 5 Amps and Board Designed especially for cylinder monitoring system. 9 Supply & installation of 2 Zone conventional Microprocessor based Fire Alarm Control panel with Auto gasrelease module and Battery Backup. 10 Conventional type Multi-sensor Smoke Detectors 11 Electronic Hooters cum flasher 12 2 x 1.5 sqmm. Armoured Copper Cable 13 Gas Abort Switch 14 Manual Gas Release Switch. 15 Auto Dialer System with minimum 05 Telephone numbers connectivity. (Provision of P&T Dedicatedtelephone line will be under HAL scope.) 16 MS Stand for mounting clean agent cylinder and accessories for Low gas Alert Monitoring System WithMS Mesh covering for all sides 17 Warning Board 18 Installation, testing & commissioning 19 Any other items required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.)
Contract Date: Ref. Documents Contract Value : ₹ 14.49 Lakh
Boards / Undertakings / PSU No of Bidders 5
Karnataka View Result →
21.
Defence #9663793 AOC
Tender For Special Repair/ Replacement Of Ber Pac And Allied Items At Imac Under Ge (Af) Gurgaon; 1 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletsall as specifiedand directed by Engr-in-Charge. 2 S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding mild steel frame work using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedand directed. 3 Supply and fixing Perforated particle board/ tiles 12 mm thick for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap gridall as specifiedand directed by Engr-in-Charge. 4 Dismentling of existing raised floor system OA 60 (Office Access 600mmx600mm) with load capacity not less than 1200 Kg Extra heavy Casino long term life including grid frame wo0rk (or equivalent) and keep aside safe for refixing complete all as specified and directed. Note : Quoted rates are incl of all dismantling and refixing of accessories and parts. 5 Fixing only perforated/ plain raised floor system OA 60 (Office Access 600mm x600mm) with load capacity not less than 1200 Kg Extra heavy casion long term life incl refixing of frame work (or equivalent) complete all as specified and directed. 6 Supply and fixinggrid frame work suitable for plain / perforated raised floor system OA 60 (Office Access 600mmx600mm) with load capacity not less than 1200 Kg Extra heavy casino long term life (or equivalent) and complete all as specifiedand directed by Engr-in-Charge.Note : Flooring will measured and paid in seperate item) 7 Supply and fixingperforated raised floor system OA 60 (Office Access 600mmx600mm) with load capacity not less than 1200 Kg Extra heavy casino long term life (or equivalent) and complete all as specifiedand directed by Engr-in-Charge. 8 Supply and fixingraised floor system OA 60 (Office Access 600mmx600mm) with load capacity not less than 1200 Kg Extra heavy casino long term life (or equivalent) and complete all as specifiedand directed by Engr-in-Charge. 9 Taking down cement plaster on brick or stone or concrete surfaces of wall/ ceilings etc including raking out joints, hacking fr key, scrubbing down waith water etc and including removal of debris and rubbish from the site complete all as specifiedand directed by Engr-in-Charge. 10 M&L for rendering 5 mm thick in CM (1:3) on concrete ceiling surface complete all as specifiedand directed by Engr-in-Charge. 11 M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specifiedand directed by Engr-in-Charge. 12 M&L for preparing new plastered surface of walls/ceiling and applying two coats of oil bound distemper over pne coat of white wash complete all as specified and directed. 13 Supply, installation, testing and commissioning of 23 TR DX (80KW) PAC with double circuit (1 Digital 1 Fixed Scroll) Compressor Bottom Discharge.Make :- VERTIV / STULZ / SCHNEIDER ELECTRIC / MITSUBISHI 14 The indoor unit shall comprise of 1 Digital & 1 Fixed Scroll Compressor, corrossion resistant EC fans with in the indoor unit, Evaporator DX Cooling Coil with hydrophilic coating, Touch/Keypad Screen Display with Microprocessor controllers, Electronic Expansion valves, Heater and non electrode(Infrared) type humidifier, Driers, G4 Filter, Suction and Discharge piping, Internal power and Control wiring, Crankcase heaters, HP/LP Cutouts, Power and Control contactors, water leak detectors and Other Electrical accessories 15 The Outdoor Condenser unit shall comprise of axail Condenser fans & motor, Condenser cooling coil (Copper coil with aluminium fins), fan speed controller, isolater switch. The matching air cooled condenser should be able to operate upto 48 Deg C of ambient temperatures. 16 The unit shall be suitable for operation on 415 Volts, 50 Hz, 3 Phase, 4 Wire AC supply. Each indoor unit should be having individual display panel, which shall display date, time, actual & set values, operating conditions, signal faults, collective faults, limiting values and PAC wellness alarm/service alarm to reduce the down time and unit memory shall hold the 400 most recent events with ID number, time and date stamp for each event. Unit should have Modbus and SNMP conectivity card. 17 Components Included for DX units:(i) Individual double circuit - 1 Digital 1 Fixed Compressor scroll compressor for R410A refrigerant.(ii) Backward curved Fan with EC Motor.(iii) Evaporator Cooling Coil with electronic expansion valve for DX.(iv) Condenser with Axial Fan Motor with Fan speed control-1 circuit/unit with Anti corrsoive coating.(v) Microprocessor (ICOM) controller with Team mode, Load sharing, standy and Cascading feature.(vi) Steam non-electrode(Infrared) type humidifier to avoid any scaling and quick response.(vii) G4 Filter Clogged Fliter (95% down to micron) with feature of filter clog alarm.(viii) Card for BMS-Backnet/ Modbus and SNMP connectivity. (ix) Temperature and Humidity sensors.(x) Return Air: 24 Deg ± 1 Deg C.(xi) Humidity: 55 Deg ± 5 Deg C.(xii) Ambient Temp. 48 Deg C(xiii) External Static Pressure : 20 PA 18 Low side work during replacement of new PAC units and paid sepaerately in the following items:- 19 Unloading, lifting, shifting & positioning during installation of the new PAC units. 20 Supply, Installation, Testing & Commissioning of hard drawn copper refregerant piping complete with fittings between indoor units and remote condensers. Refrigerant piping within the Server room and above ceiling and in comfort AC areas shall be insulated with 13mm thick closed cell elastomeric insulation with class O fire retardant properties in tubing form. Piping shall be supported properly in a neat & clean manner using clamps & supports. 21 Copper refrigerant piping not less than 18 gauge thick for Precision Packaged units having single refrigerant circuits.Pipe- 7/8 for liquid line 22 Copper refrigerant piping not less than 18 gauge thick for Precision Packaged units having single refrigerant circuits.Pipe-3/4 for liquid line 23 S&F of extended piping kit complete with fittings. 24 S&F Electrical copper Cabling (Armoured) considering the distance between indoor to outdoor-3 Core x 2.5 sq.mm 25 S&F Electrical power copper cable (Armoured) of size 3.5 Core 25 Sqmm for main power upto units with required gland, support and fittings. 26 S&F of CPVC pipes cut to required lengths and installed with all screwed joints for condensate drain. Quoted price shall be inclusive of supply and fixing in position the necessary fittings like elbows, tees reducers etc. and supporting arrangement in accordance with the approved shop drawings and specifications. Pipes shall be insulated with 6mm thick closed cell elastomeric insulation. Pipes shall be of following sizes :Drain piping 40 mm Dia 27 S&F CPVC pipes cut to required lengths and installed with all screwed joints for Humidifier soft water supply. Quoted price shall be inclusive of supply and fixing in position the necessary fittings like elbows, tees, reducers, sockets etc. and supporting arrangement in accordance with the approved shop drawings and specifications. All pipe supports shall be of Galvanised Steel. All sleeves in Fire wall/slab shall be sealed using fireproof sealant. Pipes shall be of following sizes : 25 mm dia 28 S&F MS base frame duly painted with the black enamel paint for mounting of Indoor unit and tubular MS base frame with adjustable legs duly painted for mounting of indoor unit. 29 S&F MS base frame duly painted with the black enamel paint for mounting of remote air cooled condensers with rubber pads for vibrations and required supoorting to hold on terrance. 30 Installation, positioning and commissioning of units. Commissioning of units should be done by OEM engineers after verification and complete check of installation as per OEM guidelines and under OEM engineer supervision. 31 S&F Refrigerant gas R407C/R410 to units with required compressor oil after complete pressure testing, vacumzing. 32 S&F of single louvered powder coated extruded aluminium supplyair grilles in accordance with PAC OEM guidelines. Grilles shall be provided with removable key - operated volume control dampers. Grilles shall be strong enough suitable for floor installation. (600 mm X 600 mm). 33 S&F of one way blow linear supply cum return air grilles completewithremovable/fixed corein accordance with PAC OEM guidelines. Powder coated aluminium grilles of extruded sections with integral flanges on both sides & ends as required complete with corner pieces. All grilles to be installed in ceiling to be properly supported from real slab using chains or gripple wires. (600 mm X 600 mm). 34 S&F fabricated double skin return air plenums with provision of motorized damper fixing. Plenum should have access for filters. Height of the plenum shall be as per approved drawing to touch the false ceiling for return air pick up return air plennum (2550 mm x 900 mm x 600mm). 35 S&F reputed make and suitable torque motorised damper with actuator to operate as per working and standby mode operation. Suitable for return air plenums (2550 mm x1970 mm x150mm). 36 Dismantling of existing old-age Stulz Make PAC units from location and shifting to scrap yard:- 37 Removal/ dismantling of Indoor/outdoor with connected accessories(piping cabling) units one by one as per engineer incarge instructions and permisssions. 38 Shifting of Indoor unit from Server Room to scrap yard/ store yard of AGE E&M 39 Shifting of old outdoor unit from terrance of server room to scrap yard of store yard of AGE E&M 40 NOTES FOR PAC UNITS (ITEM No 13.00 of BOQ)GENERALThe AC Units should have high sensible heat ratios, to match high sensible loads of Computer/Server Rooms/ Switch room/UPS. A Microprocessor Controlled Precision package AC system with R-410a refrigerant (compulsory) shall be suitable to take thermal and air qty. inputs from the server and adjust its operation accordingly so as to achieve highest levels of performance and efficiency.The Indoor unit shall comprise of Variable Capacity Digital Compressor in independent or Tandem circuit, corrosion resistant EC fans, Evaporator DX Cooling Coil with hydrophilic coating, Microprocessor controllers, Expansion valves, Driers, G4 Filter, Suction and Discharge piping, Internal power and Control wiring, Crankcase heaters, Humidifier, Heaters, HP/LP Cutouts, Power and Control contactors, water leak detectors and Other Electrical accessories. Fixed capacity compressor technology like multiple scrolls or Fixed capacity Tandem scrolls are strictly not allowed. Systems should mandatorily be having variable capacity compressors and performance as per above specifications. 41 THE AIR-COOLED PRECISION PACKAGE UNIT SHALL BE DESIGNED AS PER FOLLOWING CONDITIONS1. Unit return air temperature : As per BoQ (Unit Shall be Compulsory capable of taking 40 Deg C As return Air temp)2. Ambient air design température : 40 Deg C 3. Cooling Capacity : As per BoQ4. Air Flow Direction : Bottom discharge-top return 5. Air inlet Temp & RH : Set point ± 1°C (DB) & Set point ± 5% (Return Air)6. Air Quantity : Modulating as per server (110 cfm/kW (min) 7. Units should be able to provide 1 SHR at part load 42 8. Units should be able to work for fixed supply air logic instead of return air control logic. Units should be also connected to cold aisle remote sensors and should be capable of taking the temperatureand CFM feedback from the top of the racks at multiple places. This would help to regulate the fan for required airflow in the cold aisles. 9. The Units shall be designed for 68-69 DBA at 1.5 meter from the unit outlet quiet operation with all moving parts mounted on anti-vibration mounting and carefully balanced to ensure minimum vibration. 10. If required, the unit shall be tested at site for performance rating before acceptance. Performance test shall be a heat load test using heater supplied by the Precision unit supplier.11. Its mandatory to submit software selection output of the proposed unit. The specific power consumption and other performance details shall be as mentioned in BoQ. 43 Design RequirementsThe environmental control system shall be Factory assembled unit. It shall be floor mounted, optimized for maximum cooling capacity in a minimum footprint. It shall be specifically designed for service from the front of the unit. The system shall be designed for draw-through air arrangement to insure even air distribution to the entire face area of the coil. The unit shall modulate cooling capacity and airflow based on requirements.The unit shall be ready to allow the installation of shackles for top handling. Forklift handling should be possible as well. 44 Quality AssuranceThe specified system shall be factory end of line tested (functionality test) before shipment and designed to meet CE requirements. The system shall be designed and manufactured according to world-class quality standards. The manufacturer shall be ISO 9001 certified. 45 CabinetThe cabinet is manufactured from galvanized steel sheet, externally painted with RAL 7021 colour epoxy-polyester powder paint and assembled using stainless steel screws and high tensile rivets.The rear and the fans section panels are double-skinned, with 20mm (frontal fan section panel with 40mm) Class ‘O’ (A1 EU) fireproof insulation sandwiched between the skins to reduce noise emission and heat loss.The side panels, which are isolated from the inside of the unit to form a complete double-skinned cabinet, the small service panel for electrical heaters, are also lined with 10mm Class ‘O’ (A1 EU) fireproof insulation .The frontal panel(s) are assembled on hinges to make the access easier; this can be opened by the fast closing lock.The rear and side panels are screwed to the supports. The rear panel(s) are screwed directly to the frame. 46 Cooling circuitsOne or Tworefrigeration circuit(s), incorporating one high efficiency, fully hermetic Variable Scrolls with crankcase heater, air-cooled condenser, liquid receiver with outlet service valve, safety valve, filter drier, moisture indicating sight glass, liquid line solenoid valve and an electronic expansion valve directly controlled by the unit microprocessor to allow the highest energy saving.Each circuit is equipped with pre-set high-pressure switch and low-pressure transducer for protection against high condensing and low evaporating temperatures. The low-pressure transducer is managed by microprocessor controller, whilst to avoid compressor cycling at high discharge pressures, the high-pressure switch is equipped with a manual reset.The inclined evaporator coil is manufactured from copper tubes, mechanically bonded to hydrophilic painted aluminum fins, with a stainless-steel condensate drain pan.The large face area/low velocity coil allows precise control of temperature and humidity during cooling and dehumidification and is designed to optimize fluid velocity and minimize pressure drop.The evaporator shall be staged coil to allow a maximum efficiency on partial loads.The moisture indicating sight glass and liquid line solenoid valve for each circuit are mounted visible from a service window, immediately accessible once open the frontal door/s, to allow checking and adjustment while the unit is in operation. 47 Fan sectionThe unit is fitted with one (two,three) direct-driven, high efficiency, single inlet, backward curved, centrifugal ‘plug’ type innovating EC fan(s). The fan(s) have an impeller with curved blades corrosion resistant made of fibreglass plastic. This new technology allows keeping the current high strength of aluminium alloy adding the benefits of light weight and full flexibility on blade design of the new material. The good dampening behavior of the plastic also helps to reduce noise emissions.The fan motors are Electronically Commutated, IP54, with internal protections, continuous speed regulation via controller signal. The motor is three-phase with IP54 protection; provided with internal thermal protection.The fan wheel is statically and dynamically balanced; the bearings are self-lubricating.Between the fans shall be installed an “S” shape separator design to eliminate turbulence effects of one fan to the others; it shall be also designed to increase efficiency compared to simple plate separator.Fan(s) removal(s) shall be made faster thanks to the use of buttonhole specifically designed and tested to allow 10 cm increasing height during the operation. 48 The humidification system is provided by an electronic control humidifier. The dehumidification function, which is supplied as standard when the humidifier option is installed, acts by reducing the fan speed with consequent reduction of the air flow and at the same time operating the variable capacity compressors at full capacityHumidification control may be of the proportional or of the on-off type, according to the requirements of the installation: on/off is set as standard. Any amongstthe following two may be used for Humidification: 49 Humidifier.The unit Should be fitted with an Humidifier (Non Heating type) suitable for use with water of varying degrees of hardness.The humidifier Should be complete with a water inlet valve, and a maximum water level sensor; the humidifier Should include 3 high-intensity quartz lamps shine on water creating instantaneous moisture using almost any water quality. The cleanable stainless-steel humidifier pan is removable from front of the unit 50 Heating / reheatingThe heating resistors are of a rigid design for extended operational life and are normally utilized to maintain room dry-bulb conditions during a system call for dehumidification. Each stage of heaters is made of finned armoured stainless steel AISI 304 to maintain a low surfaces power density. Ionization effects are eliminated owing to the low heater surface temperature.Heating control is of the ON-OFF type.The heaters are phase balanced and are provided with a manual reset safety thermostat to disable them in the event of a high temperature.The heating system also incorporates Miniature Circuit Breaker(s) which protect the heater(s) from short circuits, should the harness be damaged accidentally. 51 Air filtrationThe standard filtration grade is G4 (95% down to 5 microns). The filter pleated structure gives high filtration efficiency, low pressure drop and permit to use the filter without metallic or cardboard frame. They are easily accessed/replaced by opening the front panels. The unit is fitted with a filter differential pressure switch, connected to the microprocessor controller to provide ‘Filter Clogged’ warning indication. 52 MonitoringThe unit shall be supplied with suitable card for both SNMP & Modbus connectivity. 53 Electrical panelThe electrical panel, located at the front of the unit in a compartment isolated from the airflow, contains the MCB’s, contactors, transformers, controller PCB, overload relays etc. Each high voltage system component is provided with an MCB over-current protective device.All high voltage components are touch protected by means of a plastic cover.The electrical panel complies with the IEC norm en60204-1. Electrical power supply is 400V (±10%) / 3Ph / 50Hz (±2Hz) +N +E and are fitted with a mains isolator, mechanically interlocked with the electrical panel cover. 54 Microprocessor controllerThe Control System is microprocessor based, 32 bit RISC. It can be programmed to control the function of every device within the unit via I/O.The controller allows setting and monitoring of the following room parameters via a 3 button keypad:• Air Temperature• Temperature set-point• Temperature band• Humidity• Humidity set-point• Humidity band The parameters are indicated using symbols and text on a back-lit, 3 digits Liquid Crystal Display. Cooling and heating modes are also indicated on the LCD screen. Alarm conditions activate a visual indicator. Three LED’s indicate the unit status – ‘Power on’ (Yellow), ‘Unit on’ (Green) and ‘Warning/Alarm activated’ (Red) The controller shall provide Unit to Unit Ethernet connection to operate with multiple units, run/stand-by rotation, automatic changeover and parameter sharing functions, external communications through BMS, sequential auto restart timer, with adjustable time delays to be applied to unit restart after a power loss. 55 The following warnings / alarms are included:• High temperature• Low temperature• High relative humidity• Low relative humidity• Humidifier failure• Fan failure• Electrical heater high temperature (When applicable)• Sensor failure• Controller errorsTerminals are provided for remote start/stop control plus Volt-free ‘Common Alarm’ and ‘Unit Run’ indicationThe display shall provide with track recorded of temperature and humidity with graphically display on the screen.A buzzer provides audible indication of a ‘Warning’ or ‘Alarm’ conditionUnit memory shall hold the 200 most recent alarms with time and date stamp for each alarmUnit memory shall hold the 400 most recent events with id number, time and date stamp for each eventMenu shall display accumulative component operating hours for major components including compressors, fan motor, humidifier and reheat. 56 Safety interlocks:Operation of heaters & humidifiers shall be possible only when blower fan is in operation. Fire detection signal from fire detector system shall be able to switch off the package unit operation in event of fire in conditioned space. 57 Refrigerant piping:Each refrigerant circuit shall be suitable for operation on R410a and shall include the following items:(a) Expansion valve with pressure equalization;(b) Removable liquid line drier / filter.(c) Liquid line sight glass with moisture indicator.(d) Hand shut off valves. 58 Electrical workEach Precision AC unit should be provided with in-built electrical panel. Necessary 415 Volts +/- 10%, 3 Phase, 4 Wire (With Neutral), 50 Hz +/- 5% Power shall be provided by Customer at each unit’s electrical panel. Balance distribution of Power is in the Scope of Bidder. All Electrical cabling should be of armored Copper. 59 Manufacturers qualification criteria:• Manufacturer should have experience in manufacturing & installation of Precision AC units in India for at least 10 (Ten) years;• Manufacturer should have ISO 9001, ISO 14001 Certification;• Manufacturer should have installation base in the respective location for such Units and fully equipped Service center (For Precision AC units) to give prompt & efficient service;• Bidder to submit Variable capacity units installation list – Top 20 large installations in India • Software generated output of proposed unit is must 60 Net Contract Sum will be after deducting Sch of Credit of Rs 5400.00
Contract Date: Feb 24, 2026 Contract Value : ₹ 97.59 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Haryana View Result →
22.
Defence #9609183 AOC
Tender For Special Repair Against Ber Dg Set At Af Stn Lonavla; 1 Supply ,installation, testing and commissioning of 160 kVA DIESEL GENERATOR SET CPCB IV+ Compliant with following description of items. A) ENGINE :CUMMINS: Make (Model QSB6.7-G21) Diesel Engines, 6 cylinders, Water–cooled, developing 206.8 Horse Power at 1500 RPM as per BS: 5514. The engine is Electric start system and suitable for DG-SET Application.Fuel Tank 385 ltr, Battery Charging Alternator, Spin -on dual filter with water, parator & Lube oil Filter, Dry type air cleaner, Turbocharger, 12 v battery, Anti vibratrion mountings, Shut off coil with safety protections viz.LLOP,HWT, Silencer andFirst fill of Lube,oil & coolant.(B) ALTERNATOR :STAMFORD: make Inductive type AC generator of 160With Std. Tools and accessories.C) BASE FRAME AND ARRANGEMENTSturdy, Fabricated, welded construction, channel iron Base frame for mountingthe above Engine and Alternator.D) CANOPY: CPCB COMPLIANT WITH D.G.SETThe acoustic enclosure manufactured with heavy gauge CRCA 1.6/2 SWG sheetof M.S. and powder coated is suitable for D.G. Set. (sound level 75 dB at 1 Mtrdistance in open field condition)E) Control Panel:PS0602Keyswitch/Autostart Micro processor based Generator Set controller with multifunction meter display LCD type – Voltage, current, frequency, Starting batteryVoltage, Engine Temp., oil pressure, kVA, Kw, engine running hours. Protectivefunction indicates the following function:Low Lub oil pressure warning & shutdown, High water temp and warning, Low coolant temp warning & temp. sensor failure indication, Low &High voltage warningFail to start shutdown, High & Low AC voltage shut down, Under & over frequency shut down/warning, Loss of sensing voltage input shut down, MCCB for overload & short circuit protection, current transformer, Aluminium busbar for incoming & outgoing termination, instrument fuses, etc. 2 Supply and fixing 250 Amp change over suitable for DG SET of capacity 160 KVAcomplete all as specified and directed by Engineer-in-Charge. 3 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3½ core 4 All as per item No.3 here-in-before but of size 70 sq mm 3½ core 5 Supply,Installation,testing and Commissioning of Centrifugal pump set with Electric Driven TEFC Sq.Cage Induction motor speed - 1450 RPM Cap- 12 Lps Head - 35 Mtrs Motor - 15 HP/11 KW,Volt - 415, 17.5 Amps Pump - 1460 RPM inclusive of starter and PCC foundation complete all as specified and as directed by Engineer-in-Charge. 6 Supply,Installation,testing and Commissioning of Centrifugal Multistage pump - 50 HP with 7 stage bronze impeller ,Rate of Flow - 9 LPS ,total Head - 210 Mtrs with Suitable Induction Motor 2900 RPM including PCC foundation complete all as specified and as directed by Engineer-in-Charge. 7 Supply and fix Fully automatic star delta stater L&T with conforms to Standard IEC 60947-1/IS, Relay Range (A) 45 - 75A,Rated Coil Voltage 240V, Rated Voltage 415V,Frequency 50 Hz all as specified and as directed by Engineer-in-Charge. 8 All as per item no.7 but of 15 HP capacity,Power 15 HP,Relay Range (A) 13-22ARated Coil Voltage 240V,Rated Voltage 415V,Frequency 50 Hz 9 Supply and lay on PCC pillars or on any position MS pipe(ERW) 100 mm dia (heavy duty), Apply two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engineer-in-Charge 10 All as per item No.9 here-in-before but of size 150 mm 11 All as per item No.9 here-in-before but of size 200 mm 12 S & F Non return sluicevalve of size 150 mm 13 S&F in foot valve of following sizecomplete, Ball type (Brass) all as specified and as directed by Engineer-in-Charge.a . 150 mm dia 14 All as per item No.13 here-in-before 100 mm dia
Contract Date: Feb 19, 2026 Contract Value : ₹ 28.95 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Maharashtra View Result →
23.
Defence #9578160 AOC
Tender For Provision Of Otm Accommodation (Phase -I) At Bagrakote Under Ge Sevoke; 1 BUILDINGS & STRUCTURE (Sch A PART-I) 2 Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE”as listed in Schedule ‘A’ Part-I.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 36,31,20,000.00 inserted by the MES in Schedule ‘A’ Part-I. 3 EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT (Sch A PART-II) 4 Lump sum price worked out by the Contractor for “EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT”as listed in Schedule ‘A’ Part-II.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 52,49,260.89 inserted by the MES in Schedule ‘A’ Part-II. 5 INTERNAL WATER SUPPLY (Sch A PART-III) 6 Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY”as listed in Schedule ‘A’ Part-III.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 46,308.98inserted by the MES in Schedule ‘A’ Part-III. 7 INTERNAL ELECTRIFICATION (Sch A PART-IV) 8 Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)”as listed in Schedule ‘A’ Part-IV.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 96,32,540.67 inserted by the MES in Schedule ‘A’ Part-IV. 9 ROAD, PATH & CULVERT (Sch A PART-V) 10 Lump sum price worked out by the Contractor for “ROAD, PATH & CULVERT)”as listed in Schedule ‘A’ Part-V.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 86,86,643.57 inserted by the MES in Schedule ‘A’ Part-V. 11 SEWAGE DISPOSAL (Sch A PART-VI) 12 Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL”as listed in Schedule ‘A’ Part-VI.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 23,70,861.02inserted by the MES in Schedule ‘A’ Part-VI. 13 AREA DRAINAGE(Sch A Part-VII) 14 Lump sum price worked out by the Contractor for “(AREA DRAINAGE)”as listed in Schedule ‘A’ Part-VII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 64,06,702.01 inserted by the MES in Schedule ‘A’ Part-VII. 15 CHAIN LINK FENCING AND GATE (Sch A PART-VIII) 16 Lump sum price worked out by the Contractor for “(CHAIN LINK FENCING AND GATE )”as listed in Schedule ‘A’ Part-VIII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 16,99,635.84 inserted by the MES in Schedule ‘A’ Part-VIII. 17 EXTERNAL WATER SUPPLY (Sch A PART-IX) 18 Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY”as listed in Schedule ‘A’ Part-IX.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 4,04,432.28inserted by the MES in Schedule ‘A’ Part-IX. 19 EXTERNAL ELECTRIFICATION (Sch A PART-X) 20 Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)”as listed in Schedule ‘A’ Part-X.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 66,58,717.06 inserted by the MES in Schedule ‘A’ Part-X. 21 FIRE FIGHTING & FIRE ALARM SYSTEM (Sch A PART-XI) 22 Lump sum price worked out by the Contractor for “FIRE FIGHTING & FIRE ALARM SYSTEM”as listed in Schedule ‘A’ Part-XI.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 32,30,010.00inserted by the MES in Schedule ‘A’ Part-XI. 23 HOT WATER SUPPLY (Sch A PART-XII) 24 Lump sum price worked out by the Contractor for “HOT WATER SUPPLY”as listed in Schedule ‘A’ Part-XII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 6,63,253.28 inserted by the MES in Schedule ‘A’ Part-XII. 25 LIGHTNING PROTECTION (Sch A PART-XIII) 26 Lump sum price worked out by the Contractor for “LIGHTNING PROTECTION”as listed in Schedule ‘A’ Part-XIII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 29,821.10 inserted by the MES in Schedule ‘A’ Part-XIII. 27 COOLING APPLIANCES (Sch A PART-XIV) 28 Lump sum price worked out by the Contractor for “COOLING APPLIANCES”as listed in Schedule ‘A’ Part-XIV.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 4,24,714.16 inserted by the MES in Schedule ‘A’ Part-XIV. 29 DEMOLITION & DISMANTLING (Sch A PART-XV) 30 Lump sum price worked out by the Contractor for “DEMOLITION & DISMANTLING”as listed in Schedule ‘A’ Part-XV.Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 12,25,480.08 inserted by the MES in Schedule ‘A’ Part-XV. 31 MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch A Part-XVI) 32 INTERNAL WATER SUPPLYS&F ofGun-metal, globe or gate valve, 65 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 33 S&F ofGun-metal, globe or gate valves, 80 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 34 S&F 15 mmbore brass CP mixer for hot & cold water screwed down for iron / CPVC pipe and fixed (3-in-1) complete all as specified and directed. 35 S&F 15 mm bore fancy type, chromium plated basin inlet connection (angle valve), cast copper alloy, screwed down, high pressure, screwed both ends for iron / CPVC pipe for unions and fixed complete all as specified and directed. 36 S&F two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron / CPVC pipe 15 mm borecomplete all as specified and directed. 37 S&F health faucet with stainless steeltube and wall hook suitable for 15 mm dia pipe with 1 meter long flexible tube including making connections and fixed in pipe etccomplete all as specified and directed. 38 INTERNAL ELECTRIFICATIONS & F modular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed.(AC& GYSER POINT) 39 S & F MCB 25A, 230 V, 50 Hz, 2P MCB (C curve) conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed. 40 All as per Srl Item No. 16.08 here-in-above but for 16A, 230 V, 50 Hz, 2P MCB (C curve) complete all as specified and directed. 41 S&F load line distribution board TPN vertical, 6 way double door type, fixed on wall semi flush with incoming MCCB 4 poles and, busbars , neutral link, blanking plates complete with all accessories all as specified and as directed. NOTE : Outgoing MCBs shall be measured and paid separately. 42 S & F of 125A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply complete all as specified and directed. 43 S & F 40 W surface / wall mountedLED batten capable of delivering minimum 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K,independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. 44 S & F 9W LED Study light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz complete all as specified and directed. 45 S & F surface mound Flame proof LED Batten, 20W, CRI > 70, suitable for Hazardous area group IIA and IIB and zone 1 & 2, IP 65 Protection with 100 lumens/watt with Die Cast Aluminium Housing, THD < 15% complete all as specified and directed. 46 SEWAGE DISPOSALConstruction of Septic tank (for 10 Users) conventional type, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Brick wall RCC M-25 in Roof Slabetc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.30 meter complete all as shown on TD drawings No CESZ/2019/TD-115 Sheets 1/4 to 4/4 and directed.NOTE : Necessary Earthwork shall be included in the quoted rate. 47 Construction of Soakage wells excavation, in any type of soil, walls of honey combed masonry, RCC cover slab in M25, bat filling interconnecting pipes of DWC complete filled with brick bats of size 1.20 M dia X 3.00 M effective depth complete all as shown on TD drawings No SZ/TD-14 Sheets 1/1 and directed.NOTE : Necessary Earthwork shall be included in the quoted rate. 48 M&L for 200 mm (inner dia) DWCPE (SN-8) pipe as per IS:16098 (Part-I) with all fittings and laid in trenches and jointed complete all as specified and directed. 49 EXTERNAL WATER SUPPLYSupply, laying and testing of 150 mm bore ductile iron pressure pipe socket and spigot end, class K-7, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating laid in trenches etc complete all as specified and directed. 50 Supply, laying and testing of 100 mm bore ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating laid in trenches etc complete all as specified and directed. 51 M&L for construction of brick masonary valves pit of internal dimensions 900mm x 900 mm x 900 mm complete and fabrication of 3.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as shown TD Drawing all as specified and directed. 52 S& F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Water supply mains of size 150 mm dia complete all as specified and directed. 53 Supply and fix valve, reflux with by pass arrangement 150 mm (6) dia complete all as specified and as directed. 54 M & L for Trial bore of 200 mm dia below ground level in any kind of soil strata including hard stone/ boulder by deploying direct/reverse or universal method to achieve desired depth including cost of consumable stores like fuel,lubricants, bentonite mud, material and transportation of machinery etc., complete all as specified and as directed..NOTE : -(a) Erection and dismantling of boring plant including all arrangement for the transportation of boring equipment to site of work from the store of contractor at site and back are to be made by contractor at his own cost. All rates should be quoted for supplying the material at site of work.Pits for collection of water and water for drilling tubewell will be arranged by the firm/contractor at site his own cost.(b) Borewell to be done subject to permission by CGWB. 55 M & L for electro logging for identification of aquafier zone with report enterpretation, including fabrication of strata chart in wooden glass frame and strata box of size 1000x600x100mm made by woodshisham and 3mm glass in front of box for display in pump house complete all as specified and directed. 56 Reaming up to 350 mm dia for depth upto 60 mtr from ground level complete all as specified and directed. 57 Reaming up to 300 mm dia for depth from 60mtr from ground level to 110 mtr complete all as specified and directed. 58 S & F of including lowering in borewell ERW/ MS casing pipe electric resistant welded pipe with socket confirming to IS:3589 of 250mm dia and thickness 8mm including two coats of anti corrosive bituminous paint of approved brand complete all as specified and directed. 59 S & F of including lowering in borewell ERW/ MS casing pipe electric resistant welded pipe with socket confirming to IS:3589 of 200mm dia and thickness 8mm including two coats of anti corrosive bituminous paint of approved brand complete all as specified and directed. 60 All as per Srl Item No. 16.41 here-in-above but slotted pipe as per IS: 8110 strainer complete all as specified and directed. 61 S & F of end cap of for 200mm dia MS pipe, complete all as specified and directed. 62 S & F of MS reducer socket of 250x200 mm dia to be fabricated out of 12 mm sheet plate with the housing pipe of 250 mm dia for fixing 250 mm dia MS pipe to 200 mm dia MS pipe, complete all as specified and directed. 63 S & F of well cap of for 250mm dia MS pipe complete all as specified and directed. 64 S & F of clamp of size 150mmx10mm of length 1.5mtr including MS nut bolts of 10mm dia and washer etc for supporting casing pipe complete all as specified and directed. 65 S & F of clamp of size 150mmx10mm of length 1.0 mtr including MS nut bolts of 10mm dia with washer etc for supporting column pipe complete all as specified and directed. 66 S & F Steel wire rope, PVC insulated of size 10 mm dia of suitable size/ length as directed with clamps, nuts & boltsand washers etc for holdingcolumn pipes/GI pipes of submersible pump set, complete all as specified and directed. 67 S & F of cage fabricated from strips of size 25x4suitable for protection of submerssible pump set with two coat of anti corrosive black bituminous paint, complete all as specified and directed. 68 S & F of flat submersible cable 3 coremulti stranded copper conductor of size 6 sqmm ISI marked, complete all as specified and directed. 69 Supply and filling pebels of size 6 to 10mm around the casing pipe of borewell including all lead and lifts free from dust dirt or vegetation manure, complete all as specified and directed. 70 Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water of borewell using air compressor of 350psi , 600cfm pressure for required number of hours including fuel etc.,complete all as specified and directed. 71 Conducting following tests for the bore well to determine safe water pumping from government approved laboratory including submitting the report to the department, complete all as specified and directed :-(i) Yield Test(ii) bacteriological Test(iii) chemical test (systematic analysis) 72 S & F of FASD submerssible motor panel starter of capacity 7.5 HPincl overload,single phasing prevention, complete all as specified and directed. 73 Design, supply, installation, testing and commissioning Iron Removal/ water treatment Plant of capacity 40 Cum/Hr (8000 GPH) complete to achive the permissible parameters of of treated waterconsisting of 01 set multi grade filter, 01 set Oxidation Chamber, 01 Set of Chemical Dosing System for Soda Ash, 01 Set ofChemical Dosing System for Sodium Hypo-chloride. The plant incld allinterconnecting piping valves & other accessories incld necessary internal cabling, termination support stays, clamps, inlet & outlet pipe connection for filtration and back wash etc confirming to relevant IS, foundationworks as per OEM. The plant to be painted with 2 coats of non-toxic anti-corrossive epoxy paint (suitable for drinking water quality) inside and 2 coats of synthetic enamel over a coat of red oxide primer complete comprising of the followings :- Item Continued as 16.43 to 16.46 74 (a)Oxidation Chamber, vertical cylindrical type, fabricated vessel of suitable size as per IS-2062, incld pipe line 100 mm dia, butterfly valve of suitable size incld 2 nos. pressure gauge ,sampling cocks filled with Oxidation Chamber. Theshell thickness shall be of 6 mm and dished end having 6mm and bed plate under drain collecting system will be strainer on bed plate. Diameter of vessel shall be - 900MM and Height on Straight - 750MM. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate). - 01 Set 75 (b)Multi Grade Filter, vertical cylindrical type , MS fabricated vessel of suitable size as per IS-2062, incld pipeline 150 mm dia, butterfly valve of suitable size incld 2 nos. pressure gauge, sampling cocks filled with Sand media having 915 mm media depth. The shell thickness shall be of 6mm and dished end having 6mm with header and lateral collecting system. Multi Grade filter should have Epoxy paint from inside and outside red oxide paint. The shell shall also be provided with adequate size of air ventline with valve etc. Diameter of vesselof MGF shall be - 2000 MM and Height on Straight - 1875MM. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate). - 01 Set 76 (c) Chemical Dosing System (CDS-4 with High Speed Agitator ) for Soda Ash at raw water collection tank with electromagnetic metering run on 220 V AC for 100% accurate dosing with all electrical connections with 200 ltrs PVC tank- 1 No. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate).- 01 Set(d) Chemical Dosing System (CDS-4 with High Speed Agitator) for Sodium Hypo-chloride after iron Removal Plant with electromagnetic metering pump run on 220 V AC for 100% accuratedosing with all accessories with 200 ltrs PVC tank- 2 Nos. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate).- 01 Set 77 Note :- (i)Minimum working pressure of the plant shall be- 2 Kgs/Sqcm Maximum working pressure of the plant shall be - 3.5Kgs/Sqcm(ii) Backwashing shall be 30 minutes at an interval of 8 hrs.(i) Contractor has to carry out necessary water testing and design of the plant accordingly. Chemical / bacteriogical test of water has to be recorded and submitted by the contractor before & after filteration. (ii)All necessary pipes, flange, fittings, valves for bypass pipe line connection, and inter connetion the plantdeemed to be included to the quoted rate. 78 Supply, installation, testing and commissioning multi stage submersible pump setwith bronze impeller, directly coupled with motor, suitable for 200/250 mm bore well water lubricated against minimum total head 45 meter and discharge min 600 LPM operated on AC 3 phase, voltage range 200V-440V, 50 Hz. The motor casing shall be of stainless steel, pump shaft/ motor shaft shall be of stainless steel, pump bowls shall be of high graded cast iron all as specified and directed. The pump and motor shall comply to all the requirements of relevant IS. NOTE :The pump size, i.e head and discharge mentioned is minimum required at site, however, the actual size shall be arrived after doing necessary yield test. 79 Supply,installation, testing and commissioning open well Submersible pump of capacity 10 HP,electric driven 415 V, TPand completeinclusive ofsubmersible cable and starter including dry run preventor and single phasing preventor complete all as specified and directed. 80 M&L for DI fittings for spigot and socket pipes of size 80 mm to 350 bore such as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket etc)Tee pieces single branch, Yjunction, double branch, cross(all sockets or socket and spigot) collars caps and plugs complete all as specified and directed. 81 FIRE FIGHTING & FIRE ALARM SYSTEMSupply, installation, testing, and commissioning of Fully automatic DOL starter, suitable for the booster pump, complete with contactors, push button, LED type indicators, auto/manual selector switch, overload protection, current sensing type single phase preventer complete with all accessories and wiring etc.with ncomplete all as specified and directed. 82 M & L for 2 core, 2.5 sqmm (for instrumentation)low smoke zero halogen (LS0H) flame retardant Fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica Fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed. 83 M & L for 3 core, 2.5 sqmm (for auto start/stop panel)low smoke zero halogen (LS0H) flame retardant Fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica Fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed. 84 S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed. 85 S & F ofCL 150 # rated ball valve25 mm NB, designed & manufactured as per IS 9890: 1981 and tested as per BS 6755-1, having floating type three piece design, CS body, SS- 304 ball, PTFE seal / packing / gasket, CS fastners and lever and screwed / socket weld end connection, etc. with accessories complete all as specified and directed. 86 S & F ofCL 150 # rated ball valve80 mm NB, designed & manufactured as per IS 9890: 1981 and tested as per BS 6755-1, having floating type three piece design, CS body, SS- 304 ball, PTFE seal / packing / gasket, CS fastners and lever and screwed / socket weld end connection, etc. with accessories complete all as specified and directed. 87 M & L for FM approved and UL listed, PN 1.6 rated lever operated, wafer type CI butterfly valve, 100 mm NB, conforming to IS 13095: 1991,fitted with visual indicator & temper switch, having Cast iron (CI) body with ductile iron EPDM coated disc, SS431 stub shaft, PTFE bushing, flange drilling standard end connection conforming to IS: 1538- 1993 along with necessary accessories complete as specified and directed by the engineer-in-charge (for Zone control valve assembly). 88 M & L for FM approved and UL listed 25 mm NB compact 3 position ball valve with drain orifice (Test and drain valve) to test and drain water flow through sprinkler systems having OFF-TEST-DRAIN position, integral sight glass, rated pressure 300 psi, orifice size 15 mm and K factor 5.6, conforming to NFPA 13, along with necessary accessories complete as specified and directed. 89 S & F 6 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed by the engineer-in-charge. NOTES: [i] Operating temperature :-300C to + 550C[ii] Performance criteria : Discharge time not less than 45 sec , throw not less than 4 meters[iii] Hydro test and burst pressure test : Shall pass hydro test pressure of 35 bars 2.5 minutes and with stand a burst pressure of 55 bar 90 S & F of the following type of signages made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners as specified and directed:-Item Continued as 16.60 & 16.61 91 Sign of size 250 mm X 300 mm reading IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE in 12.5 mm block letters in red and white background, properly spaced to provide good legibility located directly above the call-button and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level. 92 Sign of size 150 mm X 600 mm, posted and maintained at each lift landing and on the side of the stairway door from which egress is to be made on every floor, indicating the lift / lift bank / stairway by an alphabetical letter in bold type and at 75 mm high letters in red and white background, securely attached to the side of the stairway door from which egress is to be made in a way that the bottom of the sign is not above 1.5 m from the finished floor level. 93 S & F Galvanised Iron Fire bucket 9 ltr Red in colourheavy duty all as specified and as directed 94 EXTERNAL ELECTRIFICATIONS & L 50 mm outside dia double corrugated pipe(DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. 95 S & L 75 mm outside dia double corrugated pipe(DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. 96 S & L 90 mm outside dia double corrugated pipe(DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. 97 Design, Manufacturing, Supply, Installation, Testing and Commissioning of 3 way 12 kV rated Ring Main Unit ofand LT Fault Level 21KA , consisiting of 630A12 kV rated , 1 nos load break switchesas incomers &2 nos motorized type VCB as outgoings with metering modules along with necessary Earth Switches,battery and battery charger for shunt trip arrangement andMotor and other auxiliary circuit operation, HT CopperBus bar as per detailed description as follows:- Item Continued as 16.67 to 16.74 98 RMU Construction: The switchgear and busbar shall all be contained in a stainless steel enclosure filled with SF6 at 0.3 bar (300 hPa) relative pressure to ensure the insulation and breaking functions. Sealed for life, the enclosure shall meet the sealed pressure system criterion in accordance with the IEC 62271-1 standard (§ 3.6.5.4): a volume for which no further gas processing is required during its entire expected life”. In addition, manufacturer shall confirm that maximum leakage rate is lower than 0,1 % / year. It shall provide full insulation, making the switchgear insensitive to the environment (temporary flooding, high humidity...), IP67 degrees of protection in accordance with recommendation IEC 60529 § 14.2.7. Thus assembled, the active parts of the switchgear shall be maintenance-free and the switchboard shall be low-maintenance. The switchboards drives shall have an IP2X protection index. The tank shall be made of at least 2mm unpainted stainless steel.SF6 gas is the preferred dielectric medium for MV RMUs. Oil filled switchgear will not be considered.SF6 gas used for the filling of the RMU shall be in accordance with IEC 60376.Any accidental overpressure inside the sealed chamber will be limited by the opening of a pressure limiting device in the lower part of the enclosure. Gas will be released to the rear or the bottom of the switchboard away from the operator. Number of mechanical operations of Circuit breaker 2000 O/C , Number of electrical operations at full loop current for LBS: 100 O/C , Number of electrical operations at full loop current for CB: 2000 O/C,. Manufacturer shall provide type test report to prove compliance with IEC 62271-200 Annex A, Internal arc classification class AFL with 21kA 1s for the SF6 enclosure. Make of the RMU, vaccum intrtupter , relay & meter shall be of same OEM. All the test certificate shall be in the name of the OEM only . If there is any name change / acquisition by other OEM happened for the RMU then test cerificates shall contain the new OEM name only. 99 HT system : 3 phase -3 wire , HT Fault level21 kA, Power System earthing - solindly earthed at up stream source, HT Copper Bus with Short Time Curent rating 21 kA for 1 Sec ( 3Sec), Continuous current rating at least 630 A. Enclosure of RMU must be IAC rated for 21 kA for 1 Sec. Design ambient to be considered as 40 Deg C.HT Circuit Breaker : i) There shall be 1nos.load break switches as incomings and 2 nos 12 kV rated VCBas outgoing ( total 3 nos.) . The circuit breakers shall behorizontal isolation - horinzontal draw out type. All of the switchgear shall be capable of withstanding this current without any damage being caused, in accordance with the recommendations IEC 62271-1 and IEC 62271-200.Loss of service continuity class: LSC2Aii) The Circuit Breaker must be rated for 12 kV ( nominal Voltage), 28 kV/75 kVp ,3 Phase, 50 Hz, Short Circuit Fault Level of 21 kA for 1 secs. Iii) No. Of Close Coils - 01 no. operable at 24 V DC (85% - 110%) , No. of Trip Coils - 02 nos. ,operabale at 24 V DC ( 70% - 110%) for shunt trip Feature forseries trip shall also be enabled. iv) Provision for supervision of the two indepandent Trip Circuits for the two Trip Coils to be provided. v)Switchgear classification: PM classvi) Loss of service continuity class: LSC2A 100 vii) Duty Cycle : O – 0.3sec – CO – 3min – CO, Vacuum Circuit breaker shall be of M2, E2, C2 duty and capable for minimum 100 short circuit breaking operation at full short circuit level.viii) STC rating 21 kA for 1 Sec (for Vacuum Interrupter).ix)Vacuum Interrupter must be hermetically sealed and must comply IEC 60056 ( along with latest amendments). x)Circuit Breaker to be equipped with Suitable tripping arrangement with push button, Mechanical counter to assess the total number of operations of the breaker, Mechanical ON / OFF indicator, Auxiliary switches, Auxiliary Contacts( at least 2 NO + 2 NC of Class 2 category), Emergency trip push button.xi) The Operating mechanism shall be spring charged motor operated type with Spring Charge Universal motor operable on 24 V DC / 230 V AC.xii)Suitable monitoring of Circuit Breaker status ( ON, OFF, Trip, CB Spring Charged), Trip Circuit Healthy / Unhealthy, DC healthy/unhealthyto be provided using IoT based online monitoring system using microprocessor / digital RTU with historical data saving, capable of updating status and sending alarm signal on IoT monitoring unit, GSM and GPRS platform through which live monitoring status and equipment reading and fault related history can be accessed by user remotely. 101 xiii) Voltage Presence Indicator shall be provided against each HT circuit ( against each VCB) on line side for knowing the presence of line enerzisation status.xiv)Number of Mechanical operations at full rated current for breaker: 2000 O/CHT CT /PT i) One set of 03 nos. ( for 3 phases) dual core Cast Resin CTs for Eachincomer VCBcomplying with IEC:60185 & IS 2705 ( along with latest amendments) , Core -1 - 400-200/1 A , 15 VA, Cl 0.5 for metering ; Core-2 - 400-200/1 A, 15 VA , 5P10 for Protection.ii) 01 no. of 03 phase Dual Core PT forHT bus ( 11 kV)with protection HRC fuseCore 1- 11kV-6 kV /√3 / 110V/√3, Cl 0.2s, 100VACore 2- 11kV- 6 kV /√3 / 110V/3, Cl 3P, 50VA 102 Multifunction Meteriii) 2 Nos. 3 phaseDigital Multifunction Meter6400NGwith Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.for each VCB panel ( 96 mm x 96 mm) , Flush mounted, Class 1 conforming to IEC 62053-22 ( along with latest amendments) .Protection Relayi) 2 Nos. of Numerical Type IDMT Relay (50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Additionally, condition monitoring CB wear, condition monitoring CT supervision, disturbance recorder, undervoltage & over voltage protection, trip circuit supervisioncan be measured through the relay. The device shall support webserver/web HMI through which we can monitor and control the relays over a ethernet Lan network. Licenses for theprogramming software shall be provided free of cost.The numerical relay shall have large mimic-based LCD screen display . .The relay shall have 8 Digital inputs and 8 Digital Outputs and one additional watchdog ouput.The device has to aloe controlling of min. six objects (circuit breakers, disconnectors and grounding switches). Controlling has to be done by “select-execute” or “direct control” principle. Controlling has to be possible by: through local HMI, remote communication, via digital input or via function key. Events has to be readable to SCADA systems, front panel or by setting software.The sample rate of the recording has to settable to 32samples/cycle.The devices shall provide storage up to events 2000 based on the resolution.The device shall support following communication protocols: Native IEC 61850 ed1 & ed2, Modbus TCP. The IEC 61850 communication has to support peer to peer communication (GOOSE) if requiredThe IEC 61850 interface must be able to configure through setting software. Also the same setting software has to be able to generate ICD filesThe device shall have KEMA IEC61850 edition 2 certificates. 103 ii) Master Trip Relay :High Impedance and High speed relay flush mounted having coil cut-off contact with at least 4NO and 4NC contact and electrical reset facility capable to make, carry and break trip coil current of Circuit Breaker and capable for future integration with SCADA.iii) Each VCB must have separate Anti Pumping Relay.Fault Passageindicator: 104 The FPI shall facilitate quick detection of faulty section of line. The fault indication may be on the basis of monitoring fault current flow through the device. The FPI should be self-powered and should have internal lithium battery for external indication and setting of FPI in the absence of current.The FPIs shall include:Fault detection - Phase to phase and Phase to earth faults.One potential-free output contacts for hardwiring to RTUs. On this basis, the SCADA/DMS will be able to monitor phase / earth fault condition.Local fault indications - LCD display on FPI front panel along with LED indication on front panel of RMU enclosure.Multiple reset option –End of time delay (Adjustable from 2 to 16 Hrs)Remote reset (Via potential free input contact of FPI)Manual reset (Reset button on front panel of FPI)Automatic reset on current restoration.The characteristics of the FPIs shall include:Phase fault thresholds configurable from at least 100 to 800 AEarth fault thresholds configurable from at least 20 to 200 AMultiple number of steps for adjusting phase and earth fault thresholds.Fault current duration range configurable from at least 40 ms to 100 ms in 20 ms steps and further 100 ms to 300 ms in 50 ms steps. Variations with respect to these characteristics may be acceptable as long as they prove applicable and provide the same or better flexibility. 105 Earthing The cables shall be earthed by an earthing switch with short-circuit making capacity, in compliance with IEC 62271-102 standard. The earthing switch can only be operated when the switch is open. The switch and earthing switch operating mechanism shall have a mechanical endurance of at least 1000 operations.Separate line side Earth switches shall be provided in each HT Circuit ( against each VCB)RMU Bushing & Cable termination:It is preferable to have all bushings accessible from the front of the RMU. Bushings along the sides or the rear of the RMU are not acceptable.For each cable compartment, the bushing shall be at the same height in order to facilitate a possible reversal of the cablesThe bushing should be conveniently located for working with cables specified and allow for the termination of these cables: -630 A M16 bolted connectors for switch-disconnectors and vacuum circuit breakers functions.The profiles of the cable connection bushings shall be in compliance with IEC-60137 standard.Cable clamps:A cable clamp arrangement must be provided for all network cables terminated on the RMU. Provision for Cable Entry: There shall be suitable provsion for Cable entry from bottom through 3 mm thick CRCA steel thick detachable gland plate along with provision for termination of 2 runs of 3 c X 400 Sq mm 11 kV (E ) , XLPE insulated Aluminium Cables ( for HT side) and at LT side runs of cables matching with outgoing MCCB current rating. 106 S&F 8.0 Mtr Long Hot Dip Galvanised Street Light Octagonal Pole with Foundation type Base Plate and Foundation Bolts and additional structural steel as reqd, dimentions of Pole as Top Diameter - 70 mm, Bottom Diameter- 130 mm, Section Length - 8000 mm, Thickness - 3 mm, Foundation type Base Plate (200 x 200 x 16 mm), Foundation Bolts - 4 Nos 20 mm dia, pitch circle dia 200 mm, bolt length 600 mm, projects bolt length 100 mm , with Single type arm bracket 1500 mm long , top dia 70 mm , suitable for LED Street Light fitting. The Pole shaft shall have octagonal cross section and continuously tapered with single longitudinal welding all as specified and as directed. 107 M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed. 108 S&F factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 260 mm x 210 mm x 116mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact(IK 08) totally insulatedmade of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable glandand one M32 size gland suitable up to 35 Sqmm cable etc complete all as specified and directed. . 109 S&F HT/LT made up of PCC block (1:3:6) type. C-1 using 20mm graded stone aggregated of size 900 mm x 300mm x 100 mm thick (45 Cm burried in ground) and properly painted as per approved colour Brown/Blue (HT/LT) and written both side with signed red colour paint( HT cable 11 KV orLT cable 1100 Volts) on Cable route marker including necessary excavation and earthwork complete all as specified and directed. 110 Supply, installation, testing and commissioning outdoor type stainless steel (SS 304) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 304 sheet. The fixing of doubledoors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304.Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm).Incoming :-(i) Aluminium busbar rating 600 Amps rating 4 Nos. (ii) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation-01 No.Outgoing :-(i) MCCB 400 Amp 4 pole 01 Nos breaking capacity 36 KA , MCCB 63 Amp 4 pole 02 Nos breaking capacity 16 KA,, thermal magnetic release with Icu = 100% & rated impulse with stand volta.(Vimp) 8 KV with over current & short circuit protec-tion having double insulation & positive insulation featers. MCB SPN 32 Amp02 Nos. Item Continued as 16.80 111 (ii) Current transformer 100/5Amps class-1 15 VA - 1 Nos, Digital Ammeter with inbuilt selector switch -01 No, Digital Voltmeter with in built selector switch -01 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-1 Set All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape.Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class B, old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. 112 Supply, installation, testing and commissioning outdoor type stainless steel (SS 304) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 304 sheet. The fixing of doubledoors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304.Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm).Incoming :- (i) Aluminium busbar rating 600 Amps rating 4 Nos. (ii) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation-01 No.Outgoing :-(i) MCCB 100 Amp 4 pole 03 Nos, MCCB 63 Amp 4 pole 02 Nos breaking capacity 16 KA, MCCB 40 Amp 4 pole 01 Nos breaking capacity 16 KA thermal magnetic release with Icu = 100% & rated impulse with stand volta.(Vimp) 8 KV with over current & short circuit protec-tion having double insulation & positive insulation featers. (ii) Current transformer 100/5Amps class-1 15 VA - 1 Nos, Digital Ammeter with inbuilt selector switch -01 No, Digital Voltmeter with in built selector switch -01 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-1 Set Item Continued as 16.82 113 All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape.Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class B, old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. 114 Supply, installation, testing and commissioning indoor type stainless steel (SS 316) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 316 sheet. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 316 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm).Incoming :- (i) Aluminium busbar rating 150 Amps rating 4 Nos. (ii) MCCB 63 Amps 4 pole breaking capacity 16 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation-02 No ( for incomer mains and incomer DG supply) (iii) Onload change over switch 63Amps modular type - 01 nos(Note: Busbar will be connected at changeover output)Outgoing :-(i) MCCB 32 Amp 4 pole 03 Nos breaking capacity 16 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation, MCB TPN 40Amps - 02 Nos, 3 Phase timer switch 40 Amps- 1 Nos(ii) Current transformer 100/5Amps class-1 15 VA - 2 Nos, Digital Ammeter with inbuilt selector switch -02 No, Digital Voltmeter with in built selector switch -02 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-2 Set (at both incomer MCCB)Item Continued as 16.84 115 All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape.Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class B, old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. 116 SEWAGE TREATMENT PLANT (STP)Design, Supply, Installation, testing & commissioning of PACKAGED Sewage Treatment Plant(NBF Model)of capacity 50,000 Ltrs per Day with FRP Intermediate Cum Treated Water Tank of 20 KL capacity and tertiary treatment based on principle of aerobic attached growth non clogging randomly Moving Bed Bio-reactor (MBBR) complete with Recirculation Pump(Non clog submersible type of capacity 9 m3/Hr, Motor-1HP, Head- 8m) - 01 No,Air Blowers twin lobe type of capacity 3.0 HP - 02 Nos, Filter feed pump (Non clog submersible type of capacity 18.0 m3/Hr, Motor-1 HP, Head- 15 m) - 2 Nos ,Pressure Sand Filter FRP based complete with connection pipes (capacity-3.0 m3/Hr, Max Pressure- 10 PSI)- 1 NosActivated Carbon Filter FRP based complete with connection pipes (capacity-3.0 m3/Hr, Max Pressure- 10 PSI)- 1 NosChlorine Dosing Pump of capacity 0-6 LPH- 1 NosMCC Control Panel ,FRP tank accessories , including all connecting PVC pipes and all others accessories and necessary civil works for installation as per recommendation of OEM.Note:-(a)The minimum life of STP shall be 15 years. A certificate from manufacturer shall be provided by the contractor.(b)The RCC Collection Sump of suitable capacity before STP and necessary pumping arrangement (as required) is deemed to be included in the rate quoted by the contractor.(c)All accessories required to achieve the outlet parameter shall be included in the quoted rate.(d)Necessary arrangements to accomodate the inlet sewer Pipe line as per invert level deemed to be included in the quoted rate.(e)The contractor has to get the design and other parameters for complete sewage system including STP approved from GE before placing of order for procurement 117 COOLING APPLIANCESSupply , installation, testing & commissioning of refrigerator, ISI marked electric driven , single phase having capaciy 360 ltrs or nearest higher size , frost -free smoothflow type seprate chill compartment with plastic shelves, Ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement working with non-CFC refrigerant & 3 star rated including electric connection complete all as specified and directed. 118 Supply , installation, testing & commissioning of refrigerator, ISI marked electric driven , single phase having capaciy 310 ltrs or nearest higher size , frost -free smoothflow type seprate chill compartment with plastic shelves, Ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement working with non-CFC refrigerant & 5 star rated including electric connection complete all as specified and directed. 119 Supply,Installation, testing and commissioning of copper wound volatge stablizer , ISI marked for automaticoperation , single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stablization at 230 V with accuracy of +/- 2.5% with high & low voltage cut out & time delay & of capacity 01 KVA incl electric connection complete all as specified and directed. 120 Supply,Installation, testing and commissioning of copper wound volatge stablizer , ISI marked for automaticoperation , single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stablization at 230 V with accuracy of +/- 2.5% with high & low voltage cut out & time delay & of capacity 02 KVA incl electric connection complete all as specified and as directed 121 DG SETSupply, installation, testing and commissioning totally enclosed (silent operation with canopy, CPCB-IV+ complaint), static type deidel engine driven, liquied cooled, generating set of 30 KVA, 24KW capacity accommodated with accoustic encloser (at 0.8 lagging P.F), 415V,50Hz, 3 phase system & for 0.85 load factor , base plinth as per manufacturer recommendation, (A) Disel Engine:- Diesel engine shall be 4 stroke liquid cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at ambient temp of 50 dgree celcius, 50% RH & 1000m above MSL, electronic governer, confroms to BS:5514/ISO 3046, BS 649,IS 10000 with capacity of 10% overload for one hour in every 12 hours of continuous operation. The engine shall have noise limit of 75 dB(A The OEM shall undertake type approval and conformity of production certificate for emission standard for engine from agencies approved by GoI. Copy of the same shall be produced,(A1) Air intake system(i) Air intake manifold,(ii) Dry type air cleaner(A2) Exhaust system(i) Dry exhaust manifold with residental silencer and catalytic converter(A3) Cooling system(i) Engine water pump(ii) Radiator with fan(iii) coolant additive concertrate(A4) Lubricant system (i) Oil pan(ii) Engine mounted lube Oil pump (iii) Lube oil filter(A5) Starting System,(i) 12/24 V DC starter motor, voltage regulatorsItem Continued as 16.91 to 16.94 122 (ii) 12/24 V DC alternator for battery charging, (iii) 12/24 V suitable maintenance free battery of suitable capacity(A6) Engine mounted microprocesser based (perferably) instrument panel with digital display for the following:-(i) LED indicating lamps-for Genret running, remote start, shutdown, warning, manual, auto and stop(ii) Data Logs-engine run time and controller on time(iii) Start/Stop switch with key(iv) Indication/Display of for water temp, lub oil pressure, lub oil temp, battery charging,RPM, over speed, low lub oil trip, Engine hours(v) Engine and alternator data - startingf batter voltage, Engine running hours, engine temp, engine oil pressure, alternator voltage, current, KVA, frequency, KWH shall be displayed.(B) protection to Genret, (i) Low lube oil pressure warning/shutdown, (ii) High engine temp warning/shutdown,(iii) Low coolant temp warning, (iv) Sensor failure indication,(v) Low/High battery voltage warning,(vi) weak battery warning, (vii) fail to start shutdown,(viii) Cranking lockout, 123 (ix)High/Low AC voltage shutdown,(x) under/over frequency shutdown,(xi) loss of sencing voltage shutdown.(C) Others(i) AVM Pads, (ii) First fill of lubricating oils(iii) flywheel with housing(iv) Residental silencer,(D) Alternator synchronous alternator copper wounded rated 30 KVA, 415 volts, 1500 RPM,3 phase,50Hz,AC supply with 0.8 lagging power factor at 50 degree c, 50% RH and at 500 MSL, brushless type, self exicited, SPDP encl , contineous duty, voltage regulated through AVR conforming to IS:4722 with class F/H insulation. The sailent feature are as under: (a) Permanent lubricating beraing (b) Permissible overloading of 10% for one hour in every 12 hrs of contineous operation (c) permissible unbalancing capability minimum 25% per phase .(E) ACCOUSTIC ENCLOSER FOR DG SET :-S & F accustic enclosers suitable for 30 KVA capacity diesel generator set duly fabricated of channel and CRCA sheet 2 mm of required size having doors , insulation sides and top by minral rock wool confirming to IS-8183 of adequate thickness accoustic louvers / outlet ventilation system etc. complete as per manufacturers instruction with wiring and lighting arrangments duky painted of three coats of delux gloss synthetic enamelled paint over a primer coat or as directed of suitable size all as requried at site and comprising of the following:- (i) Base: MS channel fabricate MS channel made out of 5 mm thick MS sheet of ISMC suitable section, (ii) Structure heavy duty rectangular MS box channel , (iii) Doors fabricated from MS CRCA 2 mm thick air tight with neoprene rubber gasket and gun metal heavy duty spring loaded locks, 124 (iv) Out side cover : Made out of 2 mm thick ,(v) Accoustic insulation(side & top) sound proffing mineral rock wool slab thickness 100 mm of density 96Kg/m3 confriming to IS 8183 , covered by fire resistant fiber tissue as per manufacturer recommendation. Test report from original manufacturer to be submitted before incorporation in the work authenticity of material, (vi) Inspection port : Aluminium frame with double walled glass fixed type sealed with neoprene rubber gasket for viewing instrument panel. (F) FOUNDATION :- PCC Foundation M 20 ( or as per manufacturere design ) , 450 mm overall height , 300 mm above floor level and 150 mm below floor level of requried size. The price of foundation of DG Set is included in quoted rate. (G) FUEL TANK:- One no of sheet metal steel tank made out of 3.0 mm thick MS sheet of suitable capacity of hold diesel sufficient for 12 hours running at full load , tank shall be fitted with incanopy as per manufacturers design including the following:- (i) Level indicator to indicate level of diesel in tank,(ii) Drain plug with 2.0 mtrs pipe for drain oil, (iii) fuel strainer, (iv) pipe for fuel,(v) air vent. 125 NOTE:- (a) Generating set will be placed on suitable foundation as recommended by manufacturer and cost thereof shall be included on the prices quoted. (b) Tools shall be supplied as per manufacturers instruction and cost therof shall be included in the price quoted. (c) DG Set shall be placved at the site directyed by Engr-in-Charge. (d) Testing of DG Set shall be done as per relivant IS clause or min 10 hour running with 01 hour with no load, 02 hr with 25% load, 02 hrs with 50% load, 02 hrs with 75% load, 02 hrs with 100% load, 01 hr with 110% load. The required Fuel and artificial load/tools, etc to be included in quoted rate. 126 DEMOLITION & DISMANTLINGTaking down carefully old unserviciable DB including of any size/way complete including MCBs for keeping in safe custody or for taking credit all as directed. 127 Taking down carefully old unserviciable service cable of any size for keeping in safe custody or for taking credit all as directed. 128 Taking up or down from any position existing CI water tubing and connections carefully or for taking credit complete all as specified and as directed for 100 mm size 129 Taking up or down from any position existing CI water tubing and connections carefully or for taking credit complete all as specified and as directed for 100 mm size 130 Taking down carefully old unserviciable sluice valve 100 mm for keeping in safe custody or for taking credit all as directed. 131 Taking down carefully old unserviciable sluice valve 150 mm for keeping in safe custody or for taking credit all as directed. 132 Taking down carefully old unserviciable gate valve 25 mm for keeping in safe custody or for taking credit all as directed.
Contract Date: Feb 12, 2026 Contract Value : ₹ 39.08 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
West Bengal View Result →
24.
Rural Development #9576768 AOC
Tender For Providing & Fixing Side Bin Lifter At Kesnand Tal Haveli Dist Pune - Side Bin Lifter 2 Technical Specification for Side Bin lifter Assembly :A vehicle-mounted side dustbin lifter is a mechanical device used to lift and empty bins (typicallystandard DIN containers) into a garbage truck or compactor. These systems are hydraulicallyoperated and can be customized for different bin sizes and capacities. They often include featureslike safety valves, emergency stop switches, and safety features for operators.Key Specifications: Bin Compatibility:The lifter should be compatible with standard DIN containers (120, 240, typically plastic or galvanized). Lifting Capacity:The lifting capacity should be specified for different bin sizes, and may include options for lifting one 120L bin or two 240L bins. Hydraulic System:The system will utilize hydraulic cylinders for lifting and lowering the bins. The flow rate and pressure of the hydraulic system will be important specifications. Cycle Time:The time it takes to complete a lifting cycle (lift, empty, return is a critical performance indicator. Safety Features: Safety features are crucial and may include safety valves to prevent sudden descent, emergency stop switches, and safety mechanisms to protect operators. Mounting:The lifter may be designed for bolt-on attachment to the vehicle chassis with a relatively short rear overhang, designed to reduce the impact on the vehicles rear axle load and increase payload capacity. Additional Features:Some systems may include features like footsteps for operators, handrails, and warning lights. Automation Grade:Some systems are semi-automatic, with features like automated bin collection and discharge, while others may have full manual operation. Material and Finish:The lifters construction material (e.g., stainless steel, conventional steel) and surface finish (e.g., 35μin Ra) are important for durability and hygiene. Weight:The weight of the lifter itself is a factor in overall vehicle payload and performance. Dimensions: The length of the lifter (e.g., minimum 1.40 meters) and its overall dimensions in relation to the vehicle are important for installation and operation.
Contract Date: Aug 06, 2025 Contract Value : ₹ 1.18 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
25.
Tourism #9575405 AOC
Conservation And Site Management Plan Of Shri Conservation And Site Management Plan Of Shri Ballaleshwar Temple, Pali, Tal. Sudhagad, Dist. Raigad= 1 Dismantling the existing lights, tublelight, bulbs, fans, independent plug points, wiring including circuit mains of all types along with accessories etc. complete as per specification No.WG-DM / PW 2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works. 3 providing and laying green net of minimum shade dencity 75 percent as per requrinment on site as per instruction by engr incharge 4 Removing the existing cement/ lime plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 m or spreading in the compound and cleaning the site etc. complete. 5 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 6 Dismantling the R.C.C. Work 1: 2: 4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 7 Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.. 8 Removing iron pipe railing having wooden or R.C.C or C.C or iron posts and stacking the materials as directed etc. complete. 9 Removing cement tiles or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all lead, lifts, etc. complete. 10 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 11 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 12 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting service able and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 13 Removing R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound scaffolding etc. complete. 14 Dismantling brick masonary in lime or cement mortar and stacking the materials as directed with all lead, lifts, etc. 15 Dismantling stone masonary in lime or cement mortar including stacking the materials as directed with all lead, lifts, etc.. 16 Lowering down carefully existing stone masonry of the monument manually in proper order including shifting the stone elements up to a distance of 50 meter beyond the monument area and stacking them as directed by Engineer in-charge, removing building rubbish and cleaning the site etc. complete. 17 Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete (lift upto 1.50 m) By Manual Means. 18 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 19 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. 20 Filling in plinth and floors with approved excavated material in 15 cm . To 20 cm. layers including watering and compacting etc. complete. 21 Conveying the excavated materials, debris of brick or stone masonary, R.C.C. slab, water proofing, stone members/ materials, cement/ lime concrete, tiles/ marbles/ stone slab/ brick bat coba, etc. upto 2.5 km, away from the site and cleaning the site properly. 22 Clean or remove the dust cement plastercolour patches or any other cement or lime patches from the any stone surface with nichesgroovesmoulds architectural designs by using dry/ micro dry/ wet air abrasion method using calcium silicate particlesAluminium silicate particles any crushed stone particles crushed calcium carbonate particles mineral slag copper slagcoconut, almond shells particles glass beads Aluminium oxide particles, It is binding to use any of the above mentioned material with any number of coats until surface gets clean as per the requirement of site engineer, deputed conservation architect. This process includes all required tools, equipment and machinery of any shape and size as per stone surface requirement. This also includes all materials like potable water and scaffolding. At the end clean the surface by using water jet pump. 23 Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects, etc. with 4 operations in a year and monthly checkup. 24 Providing anti termite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part-III) by punching holes 6 mm dia. drilled at a distance of 30 cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 25 Providing antitermite treatment to the wooden frames of doors/windows of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on one side and four corners on other side at a downward angle of about 45 degree at the junction of wood work and masonary and injecting150ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 26 Providing antitermite treatment to the joints of wooden beams / joist used for the roof work of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at a downward angle of about 45 degree at the junction of wood work and masonary and injecting 80ml. of chlorodane 5%W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 27 ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)bytreatingthe bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifospersquaremeterofsurfaceareacovering10yearsguaranteeon bond paper. 28 Providing and fixingIndian T.W Columns, beams of size 0.30 x 0.30 andmin height - 4.50 m (12 x 12 inch x 15ft) for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 29 Providing and fixingIndian T.W beams and Stringer beams of size beam- 0.20 x 0.10 - upto 5 m(7.87 x 4 inch x17ft) for wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 30 Providing and fixingIndian T.W rafters of size length 0.075 x 0.075 - upto 5 m (2.95 x 2.95 inch x17ft) thick for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 31 Providing and fixingIndian T.W Purlins, frames and floor joists, and secondary beams of size length 0.125 x 0.075- upto 3.20 m(4.9 x 2.95 inch x 11 ft) for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 32 Providing and fixingIndian T.W Battensof size (0.025 x 0.025 (1 x 1 inch) thick length 3 m ) for roofing wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 33 Providingstructuralsteelworkinhollowsectionofvariousthicknessandsizesinsquare, rectanular and round shape from 25mm to 450mmsection as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 34 Providing and fixing solid wooden door of thickness 0.15 m including frame,fixing Big and small motifs, defensive bolts, pivot and pointed nails and providing steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge 35 Providing and fixing solid wooden door of thickness 0.050 m including frame,fixing Big and small motifs, defensive bolts, pivot and pointed nails and providing steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge 36 Providing and fixing jaali wooden door of thickness 0.050 m including fixing 8mm dia MS round bars,frame, pivot and providing rust proof paint to iron patti, pointed nails, steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge 37 Providingandapplyingmelaminepolishofrequiredfinishtothewoodworkbyspray machineincludingknottingandpreparingtheevensurfacebyscraping,applyingFrench polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 38 Providing & applying Polyurethane based wood coating to the new or old work in two coats including knotting, preparing the surface by scrapping, scaffolding etc. complete as per manufacturers specifications and as directed. 39 Providing and fixing teak wood railing of 1.05 m height in the temple mandap as per detailed drawings with top and bottom rails of size 0.075 x 0.15m andbalusters of 0.05 x 0.05m, each supported by the vertical newel posts of0.075 x 0.15 x 1.05 m with newel cap of size 0.1 x 0.1mas directed by the Engineer, removing the existing railing members and fixtures, including french polishing, and hardwares and joinery etc. complete. (Note: The work to be executed on preapproval of conservation architect). 40 Providing and fixing 50 mm.(1½″) thick Teak Wood Flooring or Planking for floor, as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 41 Providing and fixing 25 mm.(1½″) thick Teak Wood Flooring or Planking for ceiling, as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 42 Providing and fixing 75 mm.(1½″) thick Teak Woodfor decorative elements like arches , as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” Including carving, moulding, etc complete 43 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer. 44 Providing and Fixing Decorative / Ornamental grills as per design for compound wall / Fencing including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc. complete as directed. 45 Providing Un-coursed Rubble Masonry of trapstones in lime mortar 1:1½, in foundation and plinth as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking off weak corners and edges with the masons hammer, the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, bailing out water, watering and all exposed masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 46 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Flooringas per the site requirement of size of stone [0.60 x 0.45 x 0.15 Meter] (24 x 18 x 6) asper detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 47 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Bracketsas per the site requirement of size of stone [0.60 x 0.45 x 0.30 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 48 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Chajja as per the site requirement of size of stone [0.90 x 0.60 x 0.21 Meter] (36 x 24 x 8.5) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 49 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Walls, Parapetas per the site requirement of size of stone [0.60 x 0.45 x 0.30 Meter] (24 x 18 x 12) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 50 Providing Semi-circular Coping Cut-stone Second Sort, 22.5 cm. (9″) height and 52.5 cm. (1ꞌ9″) wide of trap / granite stones in lime mortar 1:1½ with size of stone [0.75 x 0.55 x 0.20 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stone shall be dressed full or to template, exposed face of the stones shall be fine rough tooled, semi-circular and all joints shall be in line and close and not more than 3 mm. (⅛″) thick, preparing the lime mortar in lime miller, scaffolding, watering and all coping work when handed over to be perfectly clean and free from all mortar stains etc. complete. 51 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Talkhadaas per the site requirement of size of stone [0.50 x 0.50 x 0.30Meter] (18 x 18 x 12) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 52 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Domeas per the site requirement of size of stone [0.45 x 0.30 x 0.15 Meter] (18 x 12 x 6) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 53 Providing/Re-setting Ashlar Fine Masonry of reuse-stones in lime mortar 1:1 in superstructure as per detailed specifications and drawings or as directed including the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 54 Providing Block In Course Masonry of trap (black basalt) in lime mortar 1:1½ with size of stone [0.45 x 0.35 x 0.20 m] (18 x 14 x 8) for steps as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the face of stones shall be rough-tooled, rustic (with or without chisel draft, except at quoins), or chamfered as specified, the beds and joints of all ashlar stones to be dressed perfectly true, square and full, headers shall not be less in length than breadth of ashlar stone plus 45 cm. (1ꞌ6″), the stones shall be set in mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 17.5 cm. (7″) in height, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 55 Providing Ashlar Rough-tooled Stone Steps of trap / granite stones in lime mortar 1:1½ with size of stone[0.60 x 0.40 x 0.213 Meter]as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall be rough-tooled on exposed surface, holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 56 Providing/Re-setting Ashlar Rough-tooled Stone Steps of reuse-stones in lime mortar 1:1½ as per detailed specifications and drawings or as directed including each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 57 Providing and fixing Trap Stone Paving, Second Sort in lime mortar 1:1, with size of stone [0.60 x 0.45 x 0.15 meter] (24 x 18 x 6) , as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete. 58 Providing Ashlar Arching of trap / granite stones in lime mortar 1:1, with size of stone 0.60 x 0.45 x 0.30 (24 x 18 x 12) as per detailed specifications and drawings or as directed including the arch stones be of approved quality, colour, hard and free from defect of any kind, the arch stones in all cases of the entire thickness, the arch stones shall be dressed full and true to their proper shapes with the necessary summering, twist or winding and be set in fine mortar, the intrados, joints and beds to fairtooled and left full, the cast or keying course to be accurately fitted, at all horizontal joints the intrados to have a 2 cm. (¾″) chamfer, the face stone may be tooled or rock-faced with or without chamfer as directed, in arches up to 60 cm. (2ꞌ) in depth all stones shall be of the full thickness of the ring, arches to be built on proper centring, the bed joints shall be radial and the side joints shall be at right angles to the bed joints and the thickness of the joints shall not exceed 5 mm. (3/16″) preparing the lime mortar in lime miller, cantering/scaffolding, watering and all arch work when handed over to be perfectly clean and free from all mortar stains etc. complete. 59 Making of moulding/ grooving/ chamfering on the surface of the formed stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 60 Making of relief architectural carving on the surface of the formed stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 61 Providing Brick Masonry First Class in superstructure with size of brick 0.20 x 0.15 x 0.07 in lime mortar 1:1½, as per detailed specifications and drawings or as directed including the bricks to be of uniform size, moulded ground, thoroughly well burnt and sound, ringing clearly when stuck with trowel, the bricks to be soaked in water for 12 hours before used, the bricks are to be laid flush in mortar in such bond as directed, as far as possible, bricks of uniform colour are to be selected for the face work when it is not to be plastered, the joints are not to exceed 12.5 mm. (½″), no bats or half brick to be used in the work, racking out joints where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 62 Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete. 63 Providing injection grouting with a slurry of lime and fine screened sand in proportion 1 : 1 with a proper pressurized jet pump, including cleaning, washing and packing the exisitng cracks or holes in the brick or stone masonry properly upwards with the slurry, scaffolding, curing etc. complete 64 Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete 65 Providing 12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1½:1 in superstructure, as per detailed specifications and drawings or as directed including all joints in masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete. 66 Stucco work in lime, surkhi and sand (1:1:1) as per traditional practices and design, the mortar should be prepared by grinding mill only. The thickness varies from 10mm to 100mm as per design. 67 Providing and applying integral fine coat, with addition of colour pigments, as paint to the plain lime stucco plaster in 2 layers, including scaffolding, curing, all leads and lifts, etc. complete. 1) The first coat to be laid is a mixture of fine lime and white washing lime in proportion of 2:1,made smooth with wooden rubbers and very lightly beaten. 2)The finishing coat consisting of fine lime, white washing lime, mixed with the appropriate pigment in 1:2:1 proportion is to be applied and well polished with trowels. 68 Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). 69 Application of water, oil and stain repellent, Non film forming, breathable, Water/Chlorophyllin based Protectguard MG of Killickguard or equivalent with brush on Stone Façade in two coats. Applications to be done 70 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (300 mm dia. R.C.C. pipe) 71 Providing and laying Hyperplas standard or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 Kilogram/ One Square Metre) & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/ One Square Metre maximum as per surface condition or Hyperplas primer @ 250 gms/ One Square Metre as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate). 72 Shingles on Roof : Providing and fixing shingles on Roof of size 17x40 inch to 13.1/4 B2042to 39.1/8 of asphalt. The material are resistance against fire and atmospheric aggressions and are developed using high quality material and cutting edge technology.R.A. Unit : 1 / Square Metre 73 Providing and fixing Teak wood Eaves Board 15 cm.(6″) wide and 12.5 mm. (½″) thick, as per detailed specifications and drawings or as directed including the planks to be best Moulmein teak to be 12.5 mm. (½″) thick and 15 cm.(6″) in width, of a uniform colour and planed, the planks to be laid truly parallel to the floor so as to cover the end rows of the tiling and to be fixed with screws of the proper length driven countersunk, all joints to be neat and close, scaffoldingetc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 74 Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 75 Galvanised iron sheet 1 mm (20 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth upto 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed. 76 Providing andfixing 10cm C.I.NahaniTrapincludingC.I.gratingbendandpiece ofC.I. pipe upto the outside face of the wall complete. 77 Supplying and Fixing 100 mm internal dia. 4.0 mm thk. (weight approx.10.0 Kg./Rm.) centrifugally cast C. I. pipes Confirming to IS 3989, sockets spigots type pipe for rain water/soil waste and ventilation with all fittings including scffolding, 1 : 1 CM jointing proper embedding and fixing on wall & column etc complete as directed. 78 Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs. 79 Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75mmx50mmframeat60cmcenterand9mmthickcommercialplyonbothsides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc.complete 80 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 81 Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, 82 Providing & Arrangemnt of MiId Back chair, Normal SyncroMechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery 83 Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 84 Providing cultural and directionalsignage for information dissemination about the temple in GRC as per the design and location provided by the conservation architect. 85 Providing and fixing Directional & Instructional Signage in the acrylic board to be used indoor spaces. SS screws to be used for fixing the signage to the wall/ wooden surface.. 86 Providing lettering as part of the signage (Cultural, directional and informatory) for information dissemination about the fort in GRC as per the design and location provided by the conservation architect. 87 Providing 120 litre SS litter bins of approved quality and design as per conservation architect of size 0.90 x 0.50 x 0.90 m in desired location 88 ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 89 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steelcenteringformwork,cover blockslaying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 90 Providing and laying Cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 91 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 92 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 93 Providing and laying in-situM30 Grade unreinforced plain cement concretepavementover a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradationas per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcheras per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and gradesas directed by Engineer-in-charge and curingby curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top withdepth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 94 Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. 95 Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directedincluding handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. 96 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. 97 Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) 98 Providing and fixing in position HCRM / CRS (CorrosionResistant Steel) bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings,foundations,slabs,beamscolumns, canopies,staircase,newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 99 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75mmdiameteretc.complete(PriorapprovalofsampleandbrandbyEx.Engineeris necessary before use) 100 Providing and installing the water cooler with Seam welded food grade Stainless steel body and tank, voltage overload compressor protection and adjustable thermostat, precoated outer body for corrosion resistance, cooling rate minimum 80 litres per hour and tank storage capacity 100 litres etc complete as per engineer incharge 101 ProvidingandfixingheavydutyinterlockingconcreteColouredpavingblocksof60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 102 Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge 103 ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cm including1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfround G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete 104 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. 105 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 106 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. 107 Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish- ing, cleaning etc complete. 108 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 109 Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exteriorgrade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete 110 Providing and fixing 30mm thickPVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom railsandtwo19x19mm MStubesinsertedhorizontallyinsidethe hollowprofile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thickx20mmwidthonstilesandrailsusingsolventcement.Theinnerpanelshallbe laminatedwith5mm thicktermite proofwaterproof plain/prelam PVCsheet using solvent cementonthebothsidesofthepanelincludingstainlesssteelfixturesandfasteningetc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. 111 Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended falseceilingconsistingofalluminiumT2”x1½”(50mmx40mm)weighing0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. 112 Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75mmx50mmframeat60cmcenterand9mmthickcommercialplyonbothsides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc.complete 113 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 114 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete 115 Providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm size as per detaileddrawing including vertical bothside polishedkadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two verticalgranitesupports15cmheightandtopgraniteof75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 116 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. 117 Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:3without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. 118 Providingandapplyingplaster/wallpunningwithplasterofparis(withplasterofparis material)in10to13millimeterthicknessto previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. 119 ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 120 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. 121 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to oldplastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. 122 Providing and fixing white european type wall-hung, Size 360mm x 360mm x 575 mm with flush valvehaving flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmakeincluding PVC soil pipe, vent pipe upto outside face of wall, 100mm diaPVCplug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) 123 ProvidingandfixingOrissatypewhiteglazedearthenware575mmwaterclosetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 124 Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete 125 Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. 126 Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. 127 Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 128 Providing and fixing white glazed urinal with Pressmatic auto closing valvehaving flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmake with P.V.C. waste pipewith fittingarrangementetc.complete as directed by Engineer in charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) 129 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 130 Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. 131 Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BARof IZE-600MM (H) X600MM (D) and 32MM DIA. and thicknessmm of the approved brand and make.27c) Straight grab bar (2 NOS)Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. 132 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. 133 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 134 Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 135 Sofa Set 3+1+1Providing & fixingSofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms)Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 136 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. 137 3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm.3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 138 Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing 139 Book Case with Glass Shutter @ 825Lx300Dx1650HTProviding & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. 140 Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. 141 Stainless Steel Pipe curtain rod . Providing & fixing of SS pipe curtain rodsincluding Brackets as per site in charge instructions & all necessary Fittings etc. completed 142 CurtainsProviding clothes for curtain of Bombay Dyeing/Binni/Mafatlal etc brands, stitching as per required size with Frill (Zaller) & fixing at required places ( including rings )Note:-Measurement would be taken as per actual length of window & default width ( i.e . 48” panha) Curtain (Material Synthetic Clothes & cost of clothes starting from Rs 250/- onwards) 143 Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface 144 Providing and fixing H.D.P container one piece moulded water tank made out oflowdensitypolythylerandbuiltcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet, outlet overflow of alltanks capacityabove 1000 to 20,000 litres 145 ProvidingwaterproofbeddingforflooringofBathandWC25mmthickinC.M.1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. 146 Providing waterproof plaster in W.C. and bath12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) 147 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete. 148 Providingandlayingdampproofcourse50mmthickinM20cementconcretelayerand bitumen / using cement with waterproofing compound curing, formwork etc. complete. 149 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metreasperdrawingincludingfixturesnecessaryweldingandpaintingwithonecoatof anticorrosive paint and two coats of oil painting complete. 150 Supply and Making of New Heritage Building Models In Acrylic /FRP material , Duco Painting , Artificial lawn and Surrounding Gardening work for Beautification of model,preparation of Base in Ply and other materials as per requirement of model by Instruction of Engineer In charge . Site Visit , Permissions and Approvals for models making , Drawings Preparation and Making . Providing and Fixing of MS Frame and Transparent Acrylic Cover to this Models . Transportation of material and Complete Model transportation at Museum/ location instructed 151 Providing and Fixing of Transparent Acrylic Cover For Heritage building Model include Cutting of Sheet as per require size, hole drill, Joint covering of Tape , installation of cover along with material transportation Cost . 152 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thickwith 3 mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete. 153 Providing and fixing in position Terracotta Jali block wall as per desired shape as a decorative feature in interior as well as exterior, block size - 200 x 200 x 60, and weight of 2 - 2.5 kg for each block in natural red color. Jali wall to be installed in specific openings as a fenestration detail, with neccessary fixtures, chemicals etc completes as specified by the conservation arhitect.
Contract Date: Feb 12, 2026 Contract Value : ₹ 22.65 Crore
Government Departments No of Bidders 3
Maharashtra View Result →
26.
Defence #9509529 AOC
Tender For Repair/Maintenance Of Fire Hydrant System At Mil Stn Kota; 1 S&F in renewal of MS flanged pipe of 100mm nominal bore, heavy duty, for multistorey building duly painted with two coats of synthetic enamel paint (color as per IS norms of fire fighting color code) over a coat of Zinc chromate pirmer complete all as specified and directed. 2 S&F in renewal of Butterfly valve, 100 mm dia bore, heavy duty with CI body, liver operated IS-13095 marked including jointing materials i.e rubber gaskets, nuts, bolts etc complete all as specified and directed. 3 S & F in renewal of 3 phase contactor of suitable size and as per site requirment for pump motor of any capacities starters complete all as specified and directed. 4 S&F in renewal of existing single phase preventer complete all as specified and directed. 5 Supply only rubber gaskets for flanged joint superior quality for 100 mm dia flanges pipe complete all as specified and directed. 6 Dismantling carefully the AC electric motors of capacity upto 12.5 HP induction type, three phase, from the foundation, cutting down and removing the old burnt winding wire from the motor unit,rewinding the same with new super enameled copper winding wire as per existingsize/gauge of wire, providing necessary insulation by varnishing and drying the same upto specific temperature of heat, replacing insulation paper sleeves with connecting insulating material, tapping and providing necessary connection to the motors assembly reinstalling, commissioning and testing the pumping set upto good working performance complete all as specified and directed. 7 M & L for metal filling, welding, turning cutting, preparing the centrifugal pump/jockey pump shaft uptostandard size including hardening smoothing etc and bearing housings NDE andDE side, including checking & servicing of impeller and making pump fully functional for 440 volt 3 phase 50 Hz 35 M head 54 cubmetre per hr discharge complete on lath machineasper site requirement complete all as specified and as directed. 8 Supply only in renewal of following spare parts of existing make for centrifugal pump capacity upto 12.5 HP for srl item No 7.00 (here-in-before) : -Inter staging rings (Set of two Nos) 9 Inter casing rings (Set of two Nos) 10 Bushes Gun Metal 11 BearingNDE/DE 12 Motor terminal plate having Nuts and bolts studs. 13 Shaft sleeves mild steel. 14 Coupling set with nut bolt and washer. 15 S&F in renewal of Star-Delta Starter with sheet enclosure outdoor type 3mm thickof suitable size for 12.5 HP capacities motor in existing location incl making electric connections with PVC insulated 1100 volts grade single core multi stranded copper conductor complete all as specified & directed. 16 S&F in renewal of cast iron non return valve ball type, heavy duty both ends flanged drilled holesincluding two nos of flanged ends including 2 flanged joints and jointing material i.e. nuts, bolts, washers, rubber gaskets etc of size 100 mm dia NRV complete all as specified & directed. 17 M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 50 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI earth strip of 25x4 mm size for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old unserviceable earthing complete all as specified and directed. (Earth lead strip and GI protection pipe beyond 7.50 m shall be measured and paid separately). 18 M & L for repair of Non return valvevalve alongwith its gasket & connected accessories upto 100 mm dia complete all as specified and directed. 19 M & L in renewal of worn out MS sheet portion of hose window framelocated at shaft of building using 18 SWG MS sheetdouble door& fixing of glass in replacement of brokenwith 4 mm thick glasses including painting of MS sheet with fire red outside and brilliant white inside complete all as specified and directed. 20 S & F in renewal of Hose reel drum for upto length 36 m, ISI Marked complete all as specified and directed. 21 M & L for painting MS pipe 100 mm dia, hose reel drum & metallic accessorieswith two coats of synthetic enamel paint (color as per IS norms of fire fighting color code) over a coat of Zinc chromate pirmer complete al as specified and as directed. Note :- Cost of T&P required for painting fire structure shall be included in the rate quoted. 22 M & L for welding, cleaning and any other minor repairrequired for smooth functioning ofAir Cushioin Tank/Air vessel upto 400 mm dia & upto 1500 mm high with dished top, made of minimum 6 mm thick MS Pipe/Plate complete including replacement (if required) of stop valve, pressure gauge and all accessories as per existing arrangement required including mounting bracket complete all as specified and as directed. ` 23 Attending complaints to pump & motors by qualified mechanic to check and test DOL/star-delta starter connections including settings of relay and timer, NO & NC contacts, main power connections, fixing of cable joints,fixing gland packing of approprate size to the pump motors, rectifying pump leakages alongwith pipe line leakges then welding, filling the leakage/gap including replacing flange, rubber packing and nut bolts of existing size and cleaning of pump motors to confirm the satisfactory running with replacement of following items. The cost of minor spares such as lugs of all size, wires, nut, bolts, washer, Flanges, rubber packing, gland packing, cable joints etc are included in quoted rate bycontractor.Note:-Repair to defects after informing within 24 hours, in case of failure noticed more than 24 hrs recovery shall be effected @ Rs.500/- per hour beyond 24 hrs. 24 Supply and fixing in renewal of hose reel of 20 mm innerdia and 30 meter length complete all as specified and as directed. 25 Supply and fixing in renewal of branch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090 (one FHC each floor) complete all as specified and as directed. 26 Providing and fixing in renewal of High Pressure – 10L Water Mist And CAF Fire Extinguisher Constant operating pressure of 34 bar with negligible recoil, Light weighted gun of 750 grams, Suitable for Class A, Class B and Live Electrical Fire, Ý System suitable for 35 KV as per EN 3 standard & 36 KV as per IS:15683:2006, Backpack and Hand Held System, Light weight anti corrosive aluminum alloy vessel/ CFRP - Carbon.,Fiber Reinforced PolymerPressure gauge on the vessel as per EN 3 standard cmplete all as specified and as directed. 27 Providing and fixing in renewal of 6 kg capacity Multipurpose dry chemical powder (ABC) type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/charged complete all as specified and as directed. 28 Providing and fixing in renewal of CO2 type fire extinguisher of 3 Kgs capacity with steel cylinder with a discharge valve and confirming to IS : 15683.Extinguisher shall be painted with red enamel apint and fixed to wall with bracket complete all as specified and as directed. 29 Supply, installing, testing and commissioning in renewal of microprocessor based Single-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel equipped with sufficient numbers of loops considering 10% spare capacity in each loop. Each loop shall have a capacity of minimum 399 analog addressable devices. 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories, wires, circuits, fasteners, clamps etc., complete all as specified and as directed with following specifications :- • Features & Benefits: Optional 40 or 80 zone alarm LEDs, Easy 5 key-press set-up, Large blue LCD display, Supports USB upload/download, Battery backed real-time clock (2 & 4 loop), 2 independent sounder circuits 500mA, multi-protocol loop driver, PC configuration software (supplied with panel), Sensitivity adjustment e.g. between day and night Input/output logic, Indicators: Fire, Fault, Disablement, Test, Buzzer Muted, Delayed Mode, Sounders Silenced, Sounders Disabled and Power. Also dedicated fault LEDs for System Fault, Sounder Fault, Supply Fault and Earth Fault. (F)Loop Capacity: 500mA per loop(G) NUMBER OF DEVICES CONNECT:Total number of devices 399 (199 NOS. MCPs, Modules & AV product + 200 SENSORS)MAKE: HONEYWELL MORELY- IAS DX MODEL-DXC4 (Networkable multi-protocol, analogue addressable fire alarm control panel). 30 Supply, installing, testing and commissioning in renewal of Sounder cum Strobe (Hooter) rated at 75 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. Wall Mount Sounder by KAC’s base sounder, high quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. Triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications., complete all as specified and as directed with following Features & Benefits:- -Reduced install errors and easy fault finding-Reduced full life costs-Excellent system performance-Reduced inventory countCertifications:• EN54-3• VdS• LPCB 31 Supply, installing, testing and commissioning in renewal of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device.UL and FM ApprovedInstallation efficiency, compliance with the latest standards are at the heart of the call point range LED Status The LED status is controlled by fire panel and shows blinking RED each time the device is polled, or continuous RED to indicate fire complete all as specified and as directed with following :- FEATURES & BENEFITS• Unique ‘Plug & Play’ installation concept • Analogue addressable communications • Fully compliant with EN54, Part 11 • Integral LEHM-MCP-GLASS SPECIFICATIONS MECHANICAL Dimensions Semi-flush mounting: 89 x 93 x 27.5 (WxHxD) Surface mounting : 89 x 93 x 59.5 (WxHxD) Weight IP Rating Operating Temperature Relative Humidity: 110g IP24D 0°C to 49°C 10% - 93% non condensing PART NUMBERS HM/MCP/GLASS Addressable break glass manual call point Operating Voltage 15V to 32Vdc max Current Consumption Quiescent: 385µA Alarm Current: 7.8 mA With TEST KEYS. 32 Supply, installation, testing & commissioning in renewal of HPSR 2C x 1.5sq.mm. MICA taped fire survival cable insulated overall shielded BASEC & LPCB certified cable conforming to BSL7846 & BS6837 CWZ, BSEN 50200. The cable shall withstand 950 degree centigrade for 3 hours conforming to BSL6387 standard with mounting accessories required for mounting & tagging with clamps, plastic pipes, fasteners and all accessories. (FOR Fire Alarm and Detection System) complete all as specified and as directed.MAKE: POLYCAB/KEI/RR. 33 Supply, installation, testing & commissioning in renewal of FIRE SIGNAGES for indication / information of fire exit, alarm panel, fire extinguishers fire axe, hose reel, hydrents, lifts etc of size 12×4inches complete all as specified and as directed. 34 Supplying and fixing in renewal of Stainles Steel Single headed oblique pattern hydrant landing valve (internal/external) with 75 / 100 mm dia flanged inlet & 63 mm dia instantaneous type female outlet coupling with cast iron wheel complete with ABS cap and chain and all accessories as per IS:5290-93 (Type-A) in cluding matching flange (14 mm thick),nuts, bolts, washers, gaskets,etc as required complete all as specified and as directed & as per approved by GE. (Make -Safex) 35 Supplying and fixing in renewal of flexible hose made with 100% polyester, black EPDM internal rubber lining with External coat of canvass (IS:636, type-A)63 mm dia, 15 mtr. Long RRL hose pipe with instanteneous type 63 mm dia SS-304male and female couplings(IS:903) duly bound and riveted to hose pipes with GI rivets and GI wire etc. as required. Appropriate Test Certificate/ report with liable warranty of product/accessories from OEM shall be submitted., complete all as specified and as directed & as per approved by GE. (MAKE-SAFEX) 36 Supplying & fixing in renewal of SS-304 Short Branch Pipe conforming to IS: 903:93 fitted with 20mm (nominal internal diameter)bore nozzle, for projecting water in form of solid jet. The Branch shall have 63mm Male Instantaneous Inlet, suitable for use with 63 mm size Fire fighting hoses. H.P. tested to 21 kgf/cm² for 2.5 minutes complete all as specified and as directed & as per approved by GE. (MAKE- SAFEX) 37 Supplying and fixing in renewal of Single Door Hose Box Outdoor application Fire Hose Cabinet made of 1.6 mm thick MS sheetDuly powder coated in red color externally and white internally with 6 mm thick glazeddoors with Expanded Metal 2 mm thick Jali including necessary locking arrangement suitable to accommodate 1 Nos 15 Mtr.Long RRL Hose and 1 NoS. branch pipe on Existing Wall / Angle Iron Frame as required. (Cost of MS structure for mounting Frame is to be Paid Extra) complete all as specified and as directed & as per approved by GE. (MAKE-SAFEX) 38 Supply and fixing in renewal of water pressure gauge 0-300 Psiincl necessary valves reducers and nipple pipe as per existing complete all as specified and directed. (Make: H-Guru) 39 Supply, installation, testing & commissioning in renewal of Pressure switch For auto start/OFF of fire hydrant system complete all as specified and directed. (Make: DANFOSS) 40 S & F in renewal of feeder pillar box of outdoor type fabricated out of 3.0 mm thick CRCA sheet double door (front & back opening),CPRIapprovedcomplete with powder coating with seven tank process mounted on M.Sangle Iron frame of size 40x40x6mm, duly grouted with PCC reqd complete all as specified and directed with the following:-(a) Aluminium bus bar 400 Amp (R Y B & N) with colouredheat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set.(b) MCCB FP 250 Amps, 415 V, 25 KA- 01 No for main in coming (c) MCCB FP 100 Amps25 KA- 02(d) MCCB FP 63 Amps25 KA- 02(e) MCB SPN 6-32 A 10 kA-01 Nos(f) LED indicator for RYB of size 22.5 mm- Set of 3(g) Multifunctional meter forfreq, power factor, amperes, voltage etc.- 01 setNote: All MCCBs must conforms Fixed thermal and fixed thermal magnetic setting and Ics= 100% of IcuNote: Leg height of angle iron frame for panel must not be less than 100 cm above the PCC base to avoid water logging. 41 S& F in renewal of feeder pillar box of outdoor type fabricated out of 3.0 mm thick CRCA sheet double door(front & back opening),CPRIapprovedcomplete with powder coating with seven tank process mounted on M.Sangle Iron frame of size 40x40x6mm, duly grouted with PCC reqd complete all as specified and directed with the following:-(a) Aluminium bus bar 400 Amp (R Y B & N) with colouredheat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set.(b) MCCB FP 160 Amps, 415 V, 25 KA- 01 No for main in coming(c) MCCB FP 100 Amps25 KA- 02(e) MCB SPN 25 A 10 kA-02 Nos(f) LED indicator for RYB of size 22.5 mm- Set of 3(g) Multifunctional meter forfreq, power factor, amperes, voltage etc.- 01 setNote: All MCCBs must conforms Fixed thermal and fixed thermal magnetic setting and Ics= 100% of IcuNote: Leg height of angle iron frame for panel must not be less than 100 cm above the PCC base to avoid water logging.
Contract Date: Feb 09, 2026 Contract Value : ₹ 35.13 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Rajasthan View Result →
27.
Housing Urban and Rular Development #9502542 Technical Bid
Tender For Electrical Work At Thdc Singrauli . - INTERNAL WIRING 2 Point wiring in PVC conduit, with modular type switch :- 3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 4 Group C 5 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 6 Group C 7 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 8 Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- 9 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 10 Circuit / Sub main wiring in PVC conduit :- 11 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 12 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. 13 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. 14 2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire 15 4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire 16 S/F light plug point Modular Type Accessories :- 17 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 18 S/F power plug point modular Type Accessories :- 19 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 20 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 21 DISTRIBUTION BOARDS & MCBs 22 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 23 Single pole 24 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 25 Supplying and Fixing Following way, Horizontal Type Three Pole and Neutral, Sheet Steel, MCB Distribution Board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 26 6 Way (4 + 18), Double Door 27 8 Way (4 + 24), Double Door 28 Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 29 8 way , Double door 30 12 way , Double door 31 S/F DP MCB Isolator 32 Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 33 40 Amps 34 S/F 4P MCB Isolator 35 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 36 63 Amps 37 S/F DP (RCCB) 38 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 39 40 Amps 40 TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only) 41 S/F MODULAR BOXES, BASE & COVER PLATE :- 42 Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required. 43 1 or 2 Module (75 mm x 75 mm) 44 S/F MODULAR TYPE SWITCH / SOCKET :- 45 Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. 46 Telephone Socket outlet. 47 TV Antenna socket outlet. 48 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 49 25 mm. 50 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, Unarmored Telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 51 2 Pair 52 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 54 1 run of cable 55 LIGHTINGFIXTURESANDFANS 56 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 57 Installation, testing and commissioning of pre-wired, fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as Required. 58 Installation of Exhaust fan in the existing opening, including making good the damage, Connection, Testing, Commissioning etc. as Required. 59 Upto 450 mm sweep 60 Fixing Louvers / Shutters for Exhaust Fan: 61 Extra for Fixing the Louvers/ Shutters Complete with Frame for a Exhaust Fan of all sizes. 62 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing 63 CABLE & ACCESSORIES 64 LT CABLE LAYING 65 Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. 66 Upto 35 sq. mm 67 Above 35 sq. mm and upto 95 sq. mm 68 Above 95 sq. mm and upto 185 sq. mm 69 Above 185 sq. mm and upto 400 sq. mm 70 LT CABLE JOINTING & END TERMINATION 71 Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 72 3½ X 25 sq. mm (28mm) 73 3½ X 35 sq. mm (32mm) 74 3½ X 50 sq. mm (35mm) 75 3½ X 95 sq. mm (45mm) 76 3½ X 120 sq. mm (45mm) 77 3½ X 150 sq. mm (50mm) 78 3½ X 185 sq. mm (57mm) 79 3½ X 240 sq. mm (62mm) 80 MISCELLANEOUS ITEMS 81 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 82 EARTHING 83 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. 84 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.. (NEUTRAL EARTHING) 85 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 86 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 87 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 88 11KV HT Board, 250 KVA Transformer, 200 KVA DG Set, HT Cable & Accessories 89 H V CABLE LAYING 90 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 91 Above 120 sq. mm and upto 400 sq. mm 92 Supply and making Indoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. 93 3 C x 240 Sq.mm 94 Supply and making Outdoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. 95 3 C x 240 Sq.mm 96 Supply and Making Straight Through Cable Jointing With Cast Resin Compund, Including Ferrule & Other Jointing Materials for Following Size of 3 core, XLPE Aluminium conductor cable of 11KV grade as required. 97 3 C x 240 Sq.mm 98 RCC Hume pipes 99 Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 250 mm dia 101 300 mm dia 102 100 mm dia 103 Manholes 104 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 105 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 106 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 107 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 108 HDPE PIPES 109 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 110 200 mm dia (OD-200 mm & ID-175 mm nominal) 111 CABLE TRAYS 112 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement) 113 150 mm width X 50 mm depth X 1.6 mm thickness 114 300 mm width X 50 mm depth X 1.6 mm thickness 115 450 mm width X 50 mm depth X 2.0 mm thickness 116 600 mm width X 50 mm depth X 2.0 mm thickness 117 EXTERNAL LIGHTING 118 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 119 Above 4.5 metre and upto 6.5 metre 120 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape , Hole Seeling to be done complete as required. 121 32 mm dia 122 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. 123 Upto 35 sq. mm 124 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 125 Upto 35 sq. mm 126 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 127 3 core 2.5 sq.mm (for6/4 Mtr Poles) 128 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 129 63 mm dia (OD-63 mm & ID-51 mm nominal) 130 TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only) 131 Supplying & Fixing Modular Type Computer jack RJ 45 ISI mark 1 Module on existing Mounting plate and box Complete with all accessories as required. 132 Light Fixtures and Fans 133 Supply of 40W LED Recessed Light Fixture Aesthetically designed 2x2 LED Flat panel light which provides soft-light and glare free symmetrical illumination complete with all accessories as required. 134 Supply of Surface Mounted Energy Efficient, LED Luminaires 12W LED DOWN LIGHT (Round/Square) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc as required. 135 Supply of Recess Mounted Energy Efficient, LED Luminaires 12W LED DOWN LIGHT (Round/Square) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc as required. 136 Supply of Recess Mounted Energy Efficient, LED Luminaires18W LED DOWN LIGHT (Round/Square) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc as required. 137 Supply, of Linear & Compact 10W Mirror Light with Decorative Grey Caps, Polycarbonate Body & Ribbed Opal Diffuser. 138 Supply of LED LuminairesBATTEN20W LED Tube Light of Box Type Prewired Indoor Luminairewith Energy Efficient Electronic Ballast, with End Caps Complete as Required. 139 Supply of Bulk Head Luminaire, heat resistant Glass cover suitable for 10W to 15W LED complete as Required. 140 Supply of Following sweep exhaust fan with guard suitable operation on single phase 230 V, 50Hz. AC Supply, with lowers /shutters in the existing opening. 141 300 mm Sweep 900 rpm 142 Supply & Fixing of 400mm Wall Mounted Fan with all accesseries as required complete for installation. 143 DISTRIBUTION PANELS 144 MAIN LT PANEL 145 NOTE:- MCCBs Wherever Specified shall have Rotary Handle. 146 Suppy , installation, testing, Design, manufacture, supply inspection, handling, assembling, affecting proper connections, testing and commissioningof2mm CRCA sheet steel fabricated cubical type Main L.T. Panel (Totally Type Test Assembled - TTA) floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 52,As per IEC 61439 after proper treatment with 9 tank process with top/bottomremovable gland plates, as required, double compression type cableglands,earth bus, hinged and lockable doorsto achieve dust and vermin proofcomplete with all inter connectionssmall wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc.The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel Should Be Internal Arc tested at 50ka for .3 sec as per IEC61641. 147 (Under no case temperature of main LT panel shall be more at any point of the panel. To avoid heating necessary exhaust fans shall have to be provided along with top louvers). 148 Degree of protection IP-42 149 The internal control wiring shall fuse less. All control wiring and metering protection shall be by MCBs. 150 Colour: Siemens Gray Powder Coated or as per approved shade. 151 INCOMER 1 FROM 250 KVA OUTDOOR TRANSFORMER 152 1 Nos. 400 amps four pole MCCB of fault breaking capacity 50 KA (Ics=Icu)fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicator and frame earthing contact ,confiming to IS 13947-21993 as amended upto date complete with following Accessories. 153 1 set of 3 CTs of ratio 400/5A, Class 1.0 accuracy 15 VA burden for APFCR. 154 Independent manual spring closing mechanism - 1 No. 155 Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection - 1Set . 156 Multifunction meter with selector switch with suitable CTs and back up MCBs. 157 3Nos. Phase indicatingLED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required. 158 Shunt trip coil 220 Volt AC. 159 INCOMER FROM DG SET (200 KVA) - 1 Nos 160 1 Nos. 400 amps four pole MCCB of fault breaking capacity 50 KA (Ics=Icu)fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicator and frame earthing contact ,confiming to IS 13947-21993 as amended upto date complete with following Accessories . 161 1 set of 3 CTs of ratio 400/5A, Class 1.0 162 Independent manual spring closing mechanism - 1 No. 163 Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection- 1Set . 164 Multifunction meter with selector switch with suitable CTs and back up MCBs. 165 Protection releaseswith LSIG and Over voltage ,under voltage,Reverse power protection Relay & Metering & Accessories for each D G set incomers 166 3 Nos. Phase indicatingLED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required . 167 Shunt trip coil 220 Volt AC. 168 1 nos battery charger with DC voltmeter and ammeter suitable for the DG sets (200 KVA) 169 INTERLOCKING 170 Interlocking logic electrical Interlocking betweenincomers and bus coupler and it should have auto start and auto trip facility for Automatic Operation of The Breakers Wit Manual Over Rid Facility 171 BUS COUPLER 172 One Number 400A 50KA 4 poleMCCB as Bus Coupler with ON/OFF Indication. 173 BUS BAR 174 500 A TPN Aluminium bus bar with heat Shrink Sleeve 175 OUTGOINGs 176 All the MCCBs Shall be Equiped/Provided with all accessories & Inbuid protection releas & MCCBs Shall be Thermal Magnetic upto 250A & Above Microprocessor Based with inbuiltO/L & S/C release. 177 1 Nos. 200 AMPSTP MCCB (Capacitor Panel) 178 1 No. 125A 36KA4P MCCB. (Ground Floor Panel) 179 1 No. 125A 36KA4P MCCB. (First Floor Panel) 180 1 No. 125A 36KA4P MCCB. (UPS Panel) 181 1 No. 100A 36KA 4P MCCB (Lift Panel) 182 1 No. 100A 36KA 4P MCCB (Fire Fighting) 183 1 No. 100A 36KA 4P MCCB (Plumbing) 184 1 No. 125A 36KA4P MCCB. (External Lighting) 185 2 No. 125A 36KA4P MCCB (Spare) 186 2 No. 100A 36KA4P MCCB (Spare) 187 Other items such as 188 1 set of control wiring 189 1 Set of designation plates 190 NOTE :- Adequate Quantity of Fire Suppression system with Pneumatic gas cylinder and Heat Sensitive Pneumatic tubing to be used in panel as perthe current fire norms & SURGE PROTECTION DEVICES Type 1 ( Class B), 4 Mode, spar type suitable for 10/350µs surge,3Nos. phase to earth and 1Nos. neutral to earth with impulse Current Iimp. ≥ 50KA Per mode & In ≥ 25kA per Mode. 191 Complete Panel as Above and complete 192 AUTOMATICPOWERFACTORCORRECTIONPANEL(CAPACITOR PANEL) - 90 KVAR- INNOVATION CENTER BLOCK 193 Supplying, Installation, Testing and Commissioning of cubicle type capacitior panel suitable for 415 & 3 phase 50 HZ A.C. supply System fabricated in compartmentalised design from CRCA Sheet Steel of2 mm thick for frame work and cover, 3 mm thick for gland plates i/cpowder coating in approve shade having 500 AMP capacityTPN Aluminium bus bar DMC/SMC bus bar supprot entire pannel should have common Al. earth bar for size 50 mm x 5 mm i/c Providing & fixing following switch gear mounting there on fans,grills for propor ventillation complete with gaskets & inner connection i/c connection with existing CTS in the main CT Panel complete as reqd. The panel board shall be of dust and verm proof with degree of protection IP 42) 194 a) 200 Amps TP MCCB with Microprocessor Based release and E/F proctection with time dely(Ics=100% Icu) - 1 No. 195 b) 250A, 4 strip Tinned Aluminium busbar -1 Set 196 c) Micro processor based automatic Power factor control relay i/c power factor metre in 8 steps 197 d) Multi functional meters with suitable CTS and protection MCBS 1 set. 198 e) 3 Nos. Phase indieating right (lamp) with MCBs protection. 199 OUTGOINGS- 200 1 Set - 63 Amp TP MCB 10 KA and Capacitor duly switching contactor for 20 KVAR capacity auto mannual selector switch start/stop puch button on/off indicatting lamp with protection MCB & delay timer complete i/c 20 KVAR mixed dielectric with 7% detuned filter copper reactor type capacitor bank with inter Connection 201 7 Set - 40 Amp TP MCB 10 KA and Capacitor duly switching contactor for 10 KVAR capacity auto mannual selector switch start/stop puch button on/off indicatting lamp with protection MCB & delay timer complete i/c 10 KVAR mixed dielectric with 7% detuned filter copper reactor type capacitor bank with inter Connection 202 complete panel as above and complete 203 GROUND & FIRST FLOOR PANEL (TYPICAL) 204 SITC of cubicle LT pannel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick,entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :- 205 INCOMER : 125 AMP 36KA FP MCCB 206 BUS BAR :160 AMP,500 Volts, 3 phase 50 HZ4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. 207 OUT GOINGS: 208 63 AMP 4P MCB Including 1 no. of Indication Lamp (DBs) - 6 209 63 AMP 4P MCB with1 no. of Indication Lamp (Spare) - 2 210 40 AMP DP MCB with1 no. of Indication Lamp (Spare) - 1 211 complete panel as above and complete 212 UPS PANEL 213 SITC of cubicle LT pannel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick,entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :- 214 INCOMER : 160 AMP 25KA FP MCCB (Including BY Pass Switch for 50 KVA UPS) 215 BY PASS Switch for UPS 160 AMP FP- 1 no. 216 BUS BAR :200 AMP,500 Volts, 3 phase 50 HZ4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. 217 OUT GOINGS: 218 63 AMP 4P MCB Including 1 no. of Indication Lamp (DBs) - 7 219 40 AMP DP MCB Including 1 no. of Indication Lamp (DBs) - 2 220 63 AMP 4P MCB Including 1 no. of Indication Lamp - 2 221 100 AMP 4P MCCB Including 1 no. of Indication Lamp - 1 222 63 AMP 4P MCB with1 no. of Indication Lamp (Spare) - 1 223 40 AMP DP MCB with1 no. of Indication Lamp (Spare) - 2 224 complete panel as above and complete 225 LIFT PANEL 226 Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out ofCRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ completewith aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. 227 INCOMER :100 AMP FP MCCB 228 BUS BAR : 125 AMP, 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp. 229 The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. 230 OUT GOINGS: 231 1 No 63 AMP 4P MCB(Lift) 232 1 No 40 AMP DP MCB(Machine Room DB) 233 1 No 40 AMP DP MCB(Spare) 234 1 No 63 AMP 4P MCB(Spare) 235 complete panel as above and complete 236 EXTERNAL LIGHT FEEDER PILLAR 237 Design,Manufacture, Supply, Installation,Testing and CommissioningofPanelFabricated out of 16 SWG CRCA sheet steel,IP 54, wall / floor mounting type with rain canopyThe sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands,including connection with outgoing feeders completeinall respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. 238 INCOMER: 239 1 no. 125A, 25KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with Selector Switch, Matching Cast Resin CTs. + 3 Nos 63A DP MCB For each Phase.with 3 Nos Astronomical Weekly programmabletime switch (SST- 1min) ON Phase for automaitc switching of landscape light fixtures at sun set and sun rise or twilight (auto on/ auto off and auto mode) with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site. 240 BUS BAR 241 TPN Aluminium bus bar with heat Shrink Sleeve rated for 125A. 242 OUTGOING 243 18 nos 16A DP MCB 244 2 nos 40A DP MCB 245 1 nos 40A 4P MCB (SPARE) 246 Other items such as 247 1 Set of control wiring 248 1 Set of designation plates 249 All Items complete as above 250 CABLE & ACCESSORIES 251 Supplying of Following Sizes of 1.1 KV Grade MulticoreAluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etcand should be NABL certified as required. 252 3.5 C X 240 Sq.mm Al. XLPE arm. 253 3.5 C X 185 Sq.mm Al. XLPE arm. 254 3.5 C X 150 Sq.mm Al. XLPE arm. 255 3.5 C X 120 Sq.mm Al. XLPE arm. 256 3.5 C X 95 Sq.mm Al. XLPE arm. 257 3.5 C X 50 Sq.mm Al. XLPE arm. 258 3.5 C X 35 Sq.mm Al. XLPE arm. 259 3.5 C X 25 Sq.mm Al. XLPE arm. 260 MISCELLANEOUS ITEMS 261 SITC of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked. As per Safety plus extinguisher fire carbondioxide 4.5kg, duly charged, portable and complete as per defence specification (safetyplus SPEC 4.5) 262 UPS 263 UNINTERRUPTED POWER SUPPLY (UPS) - 50 KVA 264 Supply of 50 Kva Online UPS, IGBT UPS(Transformer-less Design). 265 Supply of SMF Batteries (12Volt VRLA, 120 Ah, 28 Numbersto provide 30 Min Backup in total for 50 kva UPS at 0.8PF and ECV=1.7V. 266 Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the static bypass line integrated in UPS module. 267 Supply of Local Accessories (like Cabling Between UPS and the Battery onsidering Cable Routing ,Battery Interlinks , Battery Rack etc). 268 Backfeed protection at Mains & Bypass (Inbuilt / External). 269 Installation and Commissioning of 50 kVA UPS, Battery and Accessories. 270 Supply , installation , testing and commissioning 160A FP MCCB of25KA breaking Capacity in metal sheet enclosure with ON/OFF, TYB Indication lamps for Incoming of UPSComplete in All Respect as Required. 271 SUB STATION - 11KV HT BOARD, 250 KVA TRANSFORMER, 200 KVA DG SET, HT CABLE & ACCESSORIES 272 11KV SINGLE VCB PANEL BOARD 273 11KV SINGLE PANEL HT VCB (Indoor Type) - ONE INCOMERS CUM OUTGOING 274 Design, Manufacture and Supply of 1 Panel, 11 kV HT VCB Switch Board with Following Accessories : 275 Incoming Cum Outgoing 276 Indoor Type - 630A, 11kV, 350MVA for 3 Sec., TP, Horizontally isolated, horizontally drawout type, motorised spring charged, closing mechanism, motor voltage 230V AC, shunt tripping & Closing coil Voltage 24V DC, Electrically Operated, Trip Free, Dust & Vermin Proof, Vacuum Circuit Breaker (VCB) With Mechanical & Electrical OFF/ON Indicators & Provided with Following -1 No. 277 CT chamber with double wound single phase, cast resin CT, 15VA burden with core-1 for metering (CL-1) and core-2 for protection (CL-5P10) and of 60/5/5A ratio - 3Nos. 278 IDMT relay with 3 elements for over current (50-200%) and 1 element for earth fault protection(10-40%). - 1 Set 279 Anti Pumping Relay - 1 Set. 280 Master Trip Relay - 1 Set. 281 Trip circuit supervision relay - 1 Set. 282 Potential Transformers, 3 Phase, 3 Limb,Drawout Type, Resin Cast 11000/(Root 3)/110/(Root 3) Ratio Class 1 Accuracy, 100 VA Burden, with HV fuse on primary side and MCB/ MPCB on secondary side. - 1 Set 283 6 Windows Annunciator with Hooter - 1 Set 284 1 Window for over current trip - 1 Set 285 1 Window for earth fault trip - 1 Set 286 1 Window for master trip relay - 1 Set 287 1 Window for Emergency Stop Push Button - 1 Set 288 2 Windows Spare - 1 Set 289 Digital Ammeter with inbuilt selector switch - 1 Set 290 Digital Voltmeter with inbuilt selector switch - 1 Set 291 A set of breaker ON/OFF/Trip/DC control supply healthy/Trip circuit healthy/ Spring Charged VCB in test / VCB in service & R,Y,B phase indication lamps. - 1 Set 292 Emergency stop push button -1 Set 293 Limit switches with 6 NO/ 6 NC breaker auxiliary contacts - 1 Set 294 Control:- T-N-C (Trip, Neutral, Close) breaker control switch with indication arrangement. - 1 Set 295 All control wiring with protection & test terminal block as required. - 1 Set 296 Space heater with thermostat for moisture absorption. - 1 Set 297 Suitable for connection to 3C x 240 sq.mm. Cross linked polythelene(XLPE) 11kV cables or as called for. - 1 Set 298 Cable box for 3C x 240 sq.mm 11kV XLPE Al. conductor cable. - 1 Set 299 HT Danger Plate - 2 Set 300 Incoming as described above. 1 Sets 301 Powerpack as Required to Be Included (220V/24V DC), 7AH Battery for Each Breaker Module. 302 SINGLE PANEL 11KV HT VCB PANEL AS DESCRIBED ABOVE 303 11KV TRANSFORMER(11 KV /0.433 KV) (250 KVA) 304 11KV TRANSFORMER(11 KV /433 V) (250 KVA) 305 Supply Installtion, Testing and commissioning of outdoorOil cooled Outdoor Type Transformer11 KV/433 Volt Rating 3 phase, Double Wound with copper Winding.(as per IS : 1180 (part 1) : 2014Level 2 (AMENDMENT 4)/ Equivalent IEC Standard , OLTCin Steps (+10% to -10% @ 1.25%), Insulation Class : Class A , Temperature Rise : 40 Deg.c in Oil , 45 deg.c by Resistance, 50 deg.c by Ambient , Dyn 11 Vector Group and other Standard Accessories as Required Including Followings : 306 PLEASE NOTE THE TRASNFOREMR SHALL BE IN COMPLINACE WITH NEW REGUALTION IS 1180 or Equivalent IEC Standard FOR LOSSES AND EFFICIENCY and ammended upto date 307 Civil work shall be paid extra as per actual. 308 Cable Termination box with disconnecting facility for 11 KV 3C-240 sq mm XLPE cable at 11 KV side 309 ON Load Tap Changer on HV side+10% to -10% @ 1.25%. 310 Standard Fittings , Accessories /Spares :- 311 Rating and Terminal Marking Plate - 1 312 Earthing Terminals - 2 313 Lifting Lugs - 2 314 Drain Valve with Blanking Plate - 1 315 Filter Valve with Blanking Plate - 1 316 Conservator - 1 317 Conservator Oil Filling Hole With Cap - 1 318 Oil Level Indicator with Min. Marking - 1 319 Dehydrating Breather - 1 320 Conservator Drain Plug - 1 321 Air Release Device - 1 322 Pressure Relief Valve - 1 323 Thermometer Pocket - 1 324 Rollers uni directional - 4 325 Radiators Detachable - 4 326 HV Cable Box- 1 327 LT Cable Box - 1 328 Seperate Neutral Terminal - 1 329 ON Load Tap Changer - 1 330 OTI with alarm and trip contacts 331 Buchholz relay with alarm & trip contact 332 Current Transformer 333 Radiator Valve 334 Marshalling Box 335 WTI with alarm & trip contact 336 WTI Pocket 337 Drain Valve with Blanking Plate (OLTC) 338 Filter Valve with Blanking Plate (OLTC) 339 OLTC Surge Relay 340 RTCC Indoor 341 AVR 342 250 KVA (11/433V) AS DESCRIBE ABOVE 343 DIESEL GENERATOR SET - 200 KVA DG SET :- 344 200 KVA DG SET 345 Supply, intastallation, Testing & Commissioning of200 KVA Capacity Radiator cooled DG Set with Suitable StandardAMF Panel & suitable capacity engine directly coupled withalternator for 415 volt, 3 phase, 50 Hz, 4 wire, Generation system complete with accessories, Fuel Oil Tank & Control Panel etc as Required and sound proof acquastic enclosurefor the DG SET (75 db @ 1m) , including supply,fixing of antivibration pads suitable for 200 KVA DG Set as per standards of Engine manufacture, provision of conrol cablefrom engine to control panelto engine. Provision of pipe fuel pipe line of suitable size from fuel tank to engine and over flow pipe engineto fuel tank complete gatevalve and fitting leader maker etc. Supply , Intallation of starting batteries of suitableAH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials silencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by Engineer Incharge. 346 Diesel Engine (CPCB-4 NORMS COMPLANT) 4 Stroke, Radiator Cooled, Diesel Engine Model Developing Output Prime 160 KW Having Following Arrangement :- 347 Flywheel With Starter Ring for Generating Set 348 Air Filter , Lube Oil Cooler Assembly with Accessories. 349 Exhaust Air Manifold 350 Exhaust Bellow 351 Fuel Fiter 352 Diesel engine pre heating arrangement 353 Lube Oil Filter 354 Exhaust Gas Turbo Charger with After Coller 355 Day Tank For fuel with Markings 356 ECP Panel mounted on a Separate Frame. 357 Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump. 358 12V Electrical Starting System with Starter Motor and Battery Charging Alternator. 359 Engine Mounting Supports 360 ALTERNATOR Rated at 200 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 /IEC 60034 as per following Specification. 361 Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation. 362 Voltage Regulation: Provided with Fast Response Thyristor Type Electronic automatic voltage regulator, which holds output voltage within desired limits. (+/- 1%). 363 Excitation: Self Excited - Self Regulated. 364 Alternator Loading: Suitable for Taking Rated load Immediately After Machine Reaches Rated Voltage and Speed. 365 Vibration: Suitable for Direct Coupling with Engine and Mounted on Common M.S. Channel Base Frame. 366 Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection. 367 Cooling: Air Cooled type with radial fan mounted on Rotor. 368 Winding and Insulation: Insulation class H as defined in IEC – 60034-1 369 ACCESSORIES :- 370 MS Base Frame Suitable for Mounting of the Offered Engine and Alternator. 371 Day Fuel Tank of Standard Capacity as per Rating Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc. 372 Residential Silencer (1.5 Meter with 750 mm diaApprox) Including Insulation of Silencer. 373 2 Nos 12 Volts DC Battery of Suitable Capacity with Leads. 374 1 Set of AVM Pads Fitted in Base Frame. 375 TOTAL FOR 200 KVA DG SET 376 Supply of H.T. Cable 377 Supply & Testing of following 11 KV (E) grade multicore Aluminium conductor XLPE insulated cable, insulation screening withextruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. 378 3 C x 240 Sq. mm11 KV (E) 379 Supply , Installation, Testing & Commissioning of Integrated Post Top Lantern With 40W LED Lampincluding Pole &connection with 3 x 2.5 sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. 380 Supply , Installation, Testing & Commissioning of 50 W LED withcomplete with pot optic reflector connection with 3x2.5sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. 381 Supply, Installation, Testing and Commissioning of 200x160x98 (KVPC) Polycarbonate thermoplastics enclosure - junction box with I.P - 65 Protection with Terminals &cable hinged cover of approved design complete having gasket of internally embedded & made of polyeutherene & should be weather proof, rust proof, dust proof, water proof - box shall be tested as per IEC - 60670-2/60670-22. the box shall have self threaded holes & provision for mounting din rail. with 2 Nos cable gland including supplying & fixing crimping 2 nos lugs & 1 nos 32A connector 6 way for looping the incoming & outgoing cables and also connection of the street light one 6A SP MCB Including Connection of 2x6 sqmm Cable etc as Required. 382 Supplying of 6 mtr long hot dip Galvanized octagonal Pole with top of the pole 70 mm dia (A/F) and bottom of the pole 130 mm dia (A/F) made out of 3mm sheet with MS base plate of size 200mm (NS) x 200mm (NS) x 16mm (NS) on precast RCC foundation complete with suitable size openinginside the pole with flush weather proof door with locking facility preferably with LN key having proper arrangement with Accommodating of 1 Nos. 6 Amp.,10 KA MCB & neutral link4 way connector suitable for 25 Sqmm cable complete with electrically safe including inside cable termination with thimbles i/c wiring from pole box to fitting with 3x1.5 sq.mm. FRLS PVC insulated copper conductor wire, earth connection, din channel, earth stud and other accessories pertaining to this pole (But without street light fitting) etc as reqd.including providing & laying in position suitable RCC foundation as required for 6 mtr. octagonal hot dip Galvanized Pole as per Manufacturers drawing with 1:1.5:3 concrete (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including excavation of all kind of earth such as all type of soil/soft rock or hard rock etc. as per existing site condition i/c providing, cutting, bending and placing reinforcement & IncludingJ typefoundation bolts , anchor plate and templates in position as per manufacturer Standard and Providing PVC Pipe for Cable Entry and Exits Including Disposal of Surplus Malba / Softrock / Hardrock Stone etc.as Required. 383 Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including saddles fixing bolts, Connection Testing and commissioning as Required. 384 2x6 sqmm 385 Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches/pipes, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning as Required. 386 2x6 sqmm 387 Supply, Installation, Testing and Commissioning of 120w Flood Light, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light, suitable for highlighting architectural facade and general purpose lighting. 388 SOLAR POWER SYSTEM 389 Supplying, installation, testing and commissioning of Grid interactive roof top solar photo voltaic power generation system including space frame 390 (SCHEDULED ITEMS - AS PER DSR (E&M) 2022 391 (A) Supplying , installation , testing and commissioning of electric driven terrace pump suitable for automatic opeartion and consisiting of the following, complete in all respects as required:( Terrace pump) 392 (B) Horizontal type, multistage, centifugal, split casing pump of cast iron body & bronze impeller with stainless shaft, mechanical conforming to IS:1520 393 © Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 hz, AC supply with IP55 clas of protection for enclosure, horizontal foot mounted type with class-F insulation, conforming to IS-325. 394 (d)M.S fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. 395 (E)Suitbalecement concrete foundation duly plastered and with anti vibration pads. 396 Discharge : 450 liter per minute 397 Head : 35 meter 398 Providing, laying, testing & commissioningof C class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flangers, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 399 100 mm dia 400 Providing, laying, testing & commissioning of B class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc, and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 401 100mm dia 402 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required: 403 Single headed Stainless steel. 404 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. 405 100 MM NB 406 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 407 100 NB 408 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 409 100 mm dia. 410 Supplyinig and fixing 63 mm dia , 15 mm long RRL hose pipe with 63 mm dia male and female couplings duly bound with GIwire , rivets etc.confirming to IS 636 (type-A) as required: 411 Supply, fixing first aid Hose Reel with MS costruction spray painted in post office red , conforming to IS 884 complete with the following as required 20 mm nominal internals diawater hoseThermo plastic (Textile reinforced) type -2as per IS 12585) 20 mm nominal internal dia gun metal globe valve & nozzle Drum and brackets for fixing the equipments on wall .connections from riser with 25 mm dia stop gun metalvalve & M.S . Pipe and socket.40 M 412 Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS 903 Suitable for instantaneous connection to interconnect hose pipe coupling as required:Stainless steel (Grade 304) 413 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 414 2 way-100 mm dia M.S. Pipe 415 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 416 TOTAL- A(SCHEDULED ITEMS - AS PER DSR E&M 2022) 417 (NON SCHEDULED ITEMS - AS PER MARKET RATES) 418 Supply & erection of ISI marked portable fire extinguishers, confirming to IS:15683, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions ofEngineer-in-charge. 419 Water CO2type. 9 Lt. capacity 420 D.C.P.Type 6 kg. capacity 421 ABC dry powder Type 6 kg. capacity 422 CO2 gas type. 6.5 kg. cap. -Trolley mounted 423 Providing & fixing neoprene rubber double flangedrubber expansion joint(anti vibration bellow) of standard length as per manufacturers specifications. suitable for hydrostatic test pressure of 21 kg/sqcm including all necessary fittings i.e. rubber gasket, nuts, bolts, washers etc complete as required. 424 100 mm dia. 425 150 mm dia. 426 Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts. 427 Supply, fixing, testing & commissioning of 25 mm dia inspecting and testing assembly with gun metal valve, sight glass, by pass valve and connection to the drain line as required to complete the system. 428 Providing and fixing of cast iron body 100 mm dia Draw out connection in Under ground water storage tankwith heavy class MS suction pipe of required length,foot valve, suction coupling in conformity with local regulations complete in all respects. 429 Providing and fixing weather proof standard fire hose cabinet (750 mm x 600 mm x 250 mm)outdoor typemade of not less than 16 SWG MS sheethaving glassed hinged door (5 mm thick glass) including necessary locking arrangement with handle for housing two nos.15 meter long fire hose pipes, branch pipeas required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coat of fire red colour). The cabinet shall be mounted onself standing mounted type MS Angle iron frame as required. The words FIRE HOSE to be painted on the box. 430 Providing and fixing standard fire hose cabinet door with frame (900 mm x 2000 mm ) or (suitable to fit in the duct made of not less than 16 SWG MS sheethavingglass hinged door (5 mm thick glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red colour). The door shall be fixed in the masonry wall or as required. The words FIRE HOSE to be painted on the box. 431 Supply, installation and testing of cylindrical type flanged pressurevessel tank, 450 mm dia, 2 m long and of 10 mm thick M.S., common for a set of fire pumpsincluding flanged connection, suitable supporting legswith MS plate of size 75x75x5 mm at the bottom and grouted in CC foundation. The air vessel tank shall be provided with air release valve, stop cock, safety valve, pressure gauge, 50 mm dia drain valve, suitable length of connecting pipe and valve from delivery header to vessel tank, suitable pressure switches to operate all pumps (1 nos each), tested to min 25 KG/cm2complete including painting with synthetic enamel paint of approved shade with all accessories as per direction of the Engineer-in-charge. (For Pump House) 432 Providing & fixing 100 mm dia dial pressure gauge including making connections with MS pipecomplete in all respects. 433 PART-A EQUIPMENT 434 OUTDOOR UNITS (HEAT PUMP TYPE) 435 Supplying,installing,testingandcommissioningofaircooled variable refrigerant volume / Flow modular typeairconditioning system with R410a refrigerant. The PCB Chamber of outdoor unit should be refrigerant cooled suitable for 415±10% 3 Phase, 50 cycles. The unit shall consist of indoor and out door units withindividual controllerasperdetailgiveninspecifications andhaving followingitems:(Theseitemsareto be giveninIndian rupeeswithcustomduites,inlandfrt,clearanceetconSitebasis) 436 Modular type outdoor units equippedwith highlyefficient 100% inverter type hermitically sealed scroll compressors, minimum two comprossors for and above 14 HP modules, with special precoated heat exchanger, low noise condenser fan housed in compact housing duly powder coated and manufacturer of compressor and outdoor unit should be same. The Unit should have automatic refrigerant charge function. The static pressure of the outdoor unit shall be more then78Patoavoidhotairrecirculation.The unitshallbeabletooperateuptoto45°Cin coolingmode.The unit shall also have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respecttoloadforbettercomfortandenergy efficiency etc complete as reqd. The units should have free phase technology for countinued operation. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping .The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 of following capacitites: 437 Cost of R 410 A Gas should be inclusive 438 The outdoor unit should include all loading, unloading, transportation, power cabling/wiring from near the indoor and outdoor units respectively. 439 The outdoor unit should include all loading, unloading, transportation, power cabling/wiring,( Y/T joints which is required for ODU Zone requirement Modules) from near the indoor and outdoor units respectively. Outdoor Units-Heat Pump , Fully Gas Charged and Aluminum fins within the ODU (condensing) unit shall be coated with polysiloxane based coating. 440 The Vendor should considere the deration on ODU election as per Singroli MP Ambient conditions 441 18 HP Outdoor unit VRV/VRF Zone-01 442 16 HP Outdoor unit VRV/VRF Zone-02 443 22 HP Outdoor unit VRV/VRF Zone-03 444 26 HP Outdoor unit VRV/VRF Zone-02 445 INDOOR UNITS 446 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree CDB and 19 Degree C WB temperature. 447 Ceiling Mounted Cassette Unit 448 300-318 CFM / 0.63-0.80 TR 449 310-335 CFM / 1.0 TR 450 600-670 CFM / 1.2-1.3 TR 451 812-830 CFM / 1.6-2.0 TR 452 850-865 CFM / 2.5-2.8 TR 453 1130-1165 CFM / 3.1-3.2 TR 454 Ceiling Mounted HSP Ductable Unit 455 1130 -1150 CFM / 3.0-3.40 TR 456 1200-1377 CFM / 3.95-4.0 TR 457 1600-2050 CFM / 4.5-5.5 TR 458 2047-2295 CFM / 6.36-7.1 TR 459 REMOTE CONTROLLERS 460 Supply, installation, tesing and commissioning of Imported Remote controllers (Corded) for operation of ductable indoor units and AHUs. 461 Touch screen controller for indoor units controller - VRV 462 Supply, installation, testing and commissioning of touch screen controller (Which is controlled 45 nos. indoor units in terms of ON/Off Status, temp. Status, Fan Speed, ODU On/Off Status etc.) with all accessories and controls. 463 REFNUTS /T/ Y-JOINTS 464 Supply, installation, tesing and commissioning of Imported fittings Y-joints insulated, distributer and headers for all Indoor units at both the ends floors layout as per layout drawings.All interconnecting joints, Y Joints withpolysiloxane based coating 465 REFRIGERANT PIPING 466 Supply, installation, testing and commissioning of Interconnectingrefrigerantpipe work with (13/ 19mm thick) cross linked closed cell Oxide Acetate Foam tubular insulation between each set ofindoor & outdoor units asper specifications, allpiping inside the room shall be properly supported with hangersandv All interconnecting Copper piping, joints, U bends withoxycoat dual barrier coating shall run incable tray. (Note: Ref. Piping Length may be review as per site routing) 467 06.35 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 468 09.52 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 469 12.70 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 470 15.88 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 471 19.05 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 472 22.22 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 473 28.58 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 474 34.92 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 475 41.30 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 476 TRANSMISSION & CONTROL WIRING 477 Supply, installation, testing, termination and commissioning of control cum transimission wiring (should be shielded cable in PVC Pipe) of 2C x 1.5 Sqmm Cu between indoor unit and out door unit and indoor units and its remote controller. 478 2C x 1.5 Sqmm Cu Cable or as per Manufacturer OEM 479 Perforated GITray with hangers & supports for copper piping (250 mm wide) 480 Refrigerant-410a 481 Supply , charging & Leackage testing of refrigerant -410a in additionalcopper piping circuit. 482 CONDENSATE DRAIN PIPE 483 Supplying, fixing,testing and commissioning offollowing PVC pipes for condensate drain duly insulated with Fire rated Class O kinny foam /Nitrile Rubber & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers) 484 65mm dia 485 50mm dia 486 40mm dia 487 30mm dia 488 25 mm dia 489 TOTAL CARRIED OVER TO SUMMARY ( PART-A EQUIPMENTS) 490 PART-B VENTILATION 491 Propeller fan 492 Supply,installation,testing and commissioning of Certified Propeller fan of the following capacity of approved make and specification. Fan shall be supplied with aluminum gravity louver & bird screen and Speed Regulator. 493 200 mmdia propeller fan,with single phase motor 494 300 mmdia propeller fan,with single phase motor 495 450 mmdia propeller fan ,with single phase motor 496 Inline fan 497 Supply, installation, testing and commissioning ofCertified Circular/Rectangular swing type Inline fan with fiire retardent Canvas connection Speed Regulatorof the following capacity of approved make and specification. 498 100-300 CFM,5-7 mm SP WG with Single phase motor 499 350-400 CFM,10-12 mm SP WG with Single phase motor 500 600-800 CFM,10-12 mm SP WG with Single phase motor 501 Tube Axial Flow fans 502 SITC of Long case Tube axial flow fans, as per specifications and approved makes suitable for three phase operation respectively Normal/Smoke case. 503 SITC of AMCA Certified (For Air and Sound Performance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. The electric motor coupler shall be squirrel cage induction motor (IE-2 type) confirming to IS - 325-IP - 55 with class `F insulation.Fan efficiency should not be less than 70 %, noise level should not be more than 85 db @ 3 m distance when measured in hemisperical reverberant room conditions. Fans should be as per specification and drawings. (As per Vent. Fan Schedule ) (Makeup Air & Pressurization Fans with St. Press. of 40 mmWG/Make Up Air Fan at 30mm WG) 504 6000 CFM (For Stairwell/Liftwell Pressurization) 505 6500 CFM (For Smoke Extract,with H Class insulation) 506 AIR SIDE WORKS 507 Site Fabricated Duct - GI duct 508 Supply,Installation,balancing and commissioning of fabricated at site GSS sheet metal ducts (rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter,vanes, hangers, Gripple supportsetc.) in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 509 0.63mm (24 gauge) GSS 510 0.8 mm (22 gauge)GSS 511 Factory Fabricated Duct - GI duct 512 Supply,Installation,balancing and commissioning of factory fabricated GSS sheet metal ducts (rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter,vanes, hangers, Gripple supportsetc.) in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 513 0.63mm (24 gauge) GSS 514 0.8 mm (22 gauge)GSS 515 Supply, Fabrication, Installation and testing of Insulated Al. Flexible ducts in accordance with the approved shop floor drawings and specifications and shall also confirm to the BIS specifications. 516 200 mm Dia. 517 150 mm Dia. 518 Grilles/Diffusers 519 Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. 520 Aluminium supply air grilles with damper. 521 Aluminium return air grilles without damper. 522 Aluminium supply air square diffuser with damper 523 Aluminium return/exhaust air square diffuser without damper. 524 Aluminium return/exhaust airValve circular/squirell diffuser without damper. 525 Fresh Air/Exhaust Air Louvers 526 Supplying and fixing ofextruded aluminium louvres with frame bird screeen , mounting arrangement etc. as per specifications and drawings. 527 Fresh Air/Exhaust Louvers 528 Supply,Installation,Testing and commissioning of doble layer canvas connection with 1/2 hr. fire ratingasper specification. 529 MECHANICAL INSULATION 530 DUCT LINE ACOUSTIC TREATMENT 531 Supply and installation of cross linked open cell Oxide Acetate( AccoIsolate) Foam Acoustic insulation on ducts having density of 30 to 60Kg/ M³ ,having K value 0.029 W/m ° K at 0°C Deg temp and temp range of-70°C to +100°C and fire rating Class O as per BS 476 Part 6 fromCBRI,Roorkee and CFC/HCFC free as per US EPA 5021 A(2014 ). • Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010 Anexx 1 Pt 2 andas per the approved specifications. 532 15mm thick Oxice Acetate Acco IsolateAcoustic open cell insulation on one side for Duct acoustic insulation 533 DUCT LINE THERMAL INSULATION 534 Supply and installation of cross linked closed cell Oxide Acetate( Thermo Isolate) Foam Thermal insulation on ducts having density 0f 30 ±3Kg/ M³ ,having K value 0.029 W/m ° K at 0°C Deg temp and temp range of-70°C to +100°C and fire rating Class O as per BS 476 Part 6 fromCBRI,Roorkee and CFC/HCFC free as per US EPA 5021 A(2014 ). • Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010 Anexx 1 Pt 2 andas per the approved specifications. 535 25 mm thick insulation oxide acetatefoam with 2 coat layer of 7 mile cloth with starbond or eql. adhesive on Exposed supply air duct 536 13 mm thick insulation oxide acetatefoam laminated with aluminium foil supply air duct 537 9mm thick insulation oxide acetatefoam laminated with aluminium foil supply air duct 538 EXPOSED ROOF INSULATION 539 Supply and installation of cross linked closed cell Oxide Acetate( Thermo Isolate) Foam Thermal insulation on ducts having density 0f 30 ±3Kg/ M³ ,having K value 0.029 W/m ° K at 0°C Deg temp and temp range of-70°C to +100°C and fire rating Class O as per BS 476 Part 6 fromCBRI,Roorkee and CFC/HCFC free as per US EPA 5021 A(2014 ). • Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010 Anexx 1 Pt 2 andas per the approved specifications. 540 19mmthick oxide acetate insulation for underceck plain 541 TOTAL CARRIED TOSUMMARY(Mechanical Insulation works) 542 ASSOCIATED ELECTRICAL WORKS 543 Therates for the distribution boards from the Breakers andinstrumentsshall also include the following : 544 Wiring forlight / Fan points with 1.5 sq. mm PVC insulatedcopper conductor1100 Volt grade strandedflexible FRLS wiresofapproved makein1.6mmthick25mmdiaMS conduitincluding costof providing & fixing saddles, hangers, supports, cutting chases and filling chases for recessed conduiting, and including the cost of providing and fixing a6 amp240Volt ModularPlatetypeswitchesof approved quality,colour, makeanddesign with mouldedcover platein zinc chromate passivated MS box and including the cost of running 1.5 sq. mm PVC insulated copper earth wire for loop earthing etc. complete 545 TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequatesize of neutral link. 546 All MCB’s shall be of minimum 10 KA breaking capacity and MCCB s shall be not lessthan 25KA 547 The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermalmagnetic microprocessorreleasesas per BOQand following : 548 i.MCCB rating upto 250 Amps with thermal magnetic releases. 549 ii. MCCB above 250 Amps with microprocessor releases. 550 All MCB’s used for protection ofresistiveand lightlyinductive loadshallbetype “B”characteristic and inductive(motor)loadshall be of type “C” characteristic. 551 Degree of protection for following type of distribution panel enclosureshall be as per IS:13947-1993. 552 i.IP 42 for indoor panels. 553 ii. IP 55 for ODU panel. 554 AllMCCB’sshall beprovidedwithoperatingmechanismfordoorinterlock. 555 All hinged door shall be earthedthrough2.5 sq mm tinnedbraidedcopper wire. 556 Providing cableclamps/ supportswithin distributionboardscablealley. 557 Current density of aluminium shall be 1sq mm for 1.0 Amps for ratedcurrent of bus bars. 558 Model, current capacity location and frame size of switchgear shall be writteninside of thepanel doors with paint / permanent marker asapproved shop drawings / site requirment. 559 All meter shall be digital type and all starter shall be as per Type-2 Coordination chart 560 Current Transfomer shall be resin cast. 561 All Panel Shall be BMS Compitable 562 AHU/Fan Panel 563 Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following LT panels fabricated out of 14 guage CRCA sheet steel in cubical formationwith reinforecment of suitable size angle iron and channel T iron flats. All steel material used in the construction of panels shall be powder coated. A solid busbar shall be provided at the bottom of the panel with two connecting eyes for termination. The boards shall be suitable for 415 volts, 50 Hz, 3 phase , 4 wire supply system. All the hardware used in the fabrication of the panel shall be galvanized with zinc passivation. The panel shall be compartmentalized to accommodate one feeder in each compartment. A vertcal cable alley of suitable width shall be provided to serve on or two vertical feeder sections. Also the opening between the busbar chamber and the feeder section shall be shrouded with bakelite / hylam sheet with min.3 mm thickness. 564 The panel drawing shall be approved before taking up the fabrication and compitable BMS if in future required. (ALL AHU PANEL WITH 565 In All panel Each starter should have remote control and interlocking facilities including auto manual switch, NO/NC contacts for control and must have auto manual operation suitable to take signal from fire alarm panel for automatic operation of fan in case of fire.All smoke /vent. fan panel the starters shall have suitable facility to operate with fire sensing control modules. 566 Vent. Fan Panel- MCC -1 567 Incoming 568 1 no. 63 amp MCCB 569 Phase indicating lights with control fuses. 570 Breaker ON/OFF/TRIP indicating lights. 571 Bus Bars 572 100 amp TPN Aluminum Bus Bar with heat shrinkable insulation colored sleeves. 573 Outgoings 574 3 nos. 6-10 A,TP MPCB(With DOL Starter) 575 The base frame shall be 75 mm x 5 mm. 576 Panel as described above and in drawings. 577 METER BOARD / SUB PANELS 578 Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing / wall mounted factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. 579 ODUs Panel-01-TERRHVAC 580 Same as above item but outdoor Panel with following accessories. 581 INCOMING: 582 1 No. 200 amps, 415VTPN MCCB with overcurrent and short circuit releases, all indication, push button etc. 583 Coloured (Red, Yellow, Blue) phase indicating lamp - 1 set 584 (0 - 200 A) CT operated Ammeter with selector switch& 3 nos. CTs ratio 200/5A , 15VA burden & accuracy class of 1.0 - 1 set 585 0-500 V Voltmeter with selector switch - 1 set 586 BUSBAR: 587 250 Amp. TPN, 35 kA Al. Bus Bar 588 OUTGOINGS: 589 80A, TPN ELCB with 300mA- 3 Nos. (Incl. 1No. Spare) 590 40A, TPN ELCB with 300mA- 5 Nos. (Incl. 1No. Spare) 591 ODU Panel Described as above/As per Manufacturer ODU Configuration. 592 Spcl. Note : All Above mentionedpanel SITC as per actual GA dwgs. equipments and final config,. Of ODUs. 593 CABLING (POWER ) 594 Power Cabling and Earthing: 595 Spcl. All Cables Should be fire survival Cables (FRLS) 596 Supply, installation, testing & commisioning of LPCB approved mineral insulated copper conductor cables, construction as per BSEN 60702-1:2002 suitable for withstanding 950 deg under fire conditions as per BS 6387 CWZ and 850 deg under fire conditions on one single sample as per BSEN 50200. Cable should be manufactured with seamless copper tube and should be HFLS sheathed. (Tagging to be provided with aluminium strips on both the ends as approved). 597 3Cx10 Sqmm 598 3Cx06 Sqmm 599 3Cx04 Sqmm 600 4Cx06 Sqmm Cu 601 4Cx10 Sqmm Cu 602 Control Cabling 603 Supply, installation, testing & commisioning ofCopper conductor , PVC insulated, PVC sheathed armoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alarm system with the AHU and the smoke dampers and AHU to Control Consol Panel). 604 8C x 1.5 Sqmm 605 Supply, installation, testing & commisioning of cable termination of above cables with copper lugs & flameproof brass compression glands on both the ends with inhibting compound etc. complete as required. 606 3Cx10 Sqmm 607 3Cx06 Sqmm 608 3Cx04 Sqmm 609 4Cx06 Sqmm Cu 610 4Cx10 Sqmm Cu 611 Supplying and installing following size of perforated G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders including G.I. bolts & nuts, painting of suspenders etc. complete as required. 612 100 mm. Width x 50mm. Depth x 1.6mm. Thickness. 613 150 mm. Width x 50mm. Depth x 1.6mm. Thickness. 614 225 mm. Width x 50mm. Depth x 1.6mm. Thickness. 615 Providing and fixing following size of G.I. strip / G.I. wire on surface or in recess for loop earthing alongwith the existing surface/ recessed conduit/ submain wiring / on cable tray/ on surface including G.I. clamps etc. complete as required. 616 6 SWG G.I. wire 617 Electrical work i.e. 618 3 Pin socket switch for Cassette, fcu, inline fan, propeller fan etc. near to the each unit. 619 Isolator Switch (Weather Proof) near to the each ODU. 620 Copper wiring /earthing from Isolator switch to M/C (chillers, pump, AHU , Fan etc.) 621 All DOL Starter Panel and Power cable for Fans/AHU 622 RCC Foundation for chiller, pumps, panels/outdoor units etc.. 623 Spcl. Note:The work includes design, supply, fabrication, erection, testing & commissioning of the complete air conditioning system with items specified above. 624 Supply Installation , Testing & Commissioning of 8 Passangers, 544 Kg. 1mps. Automatic Elevator, with VVVF and Microprocessor based Simplex Collective Selectivewith/without Provision ofattendant control. Separate Landing Push Button Box for all Landings with scrolling indicator. with provision of Attendant control, having 2 stops , 2 Openings with SS Cabin (Hair Line Finish) havingCross flow fan for Ventillation , having sleek (SS hair Line finish-PVC) and LED small Circular lighting all complete. 625 Other Features 626 Battery Operated Emergency Light And Alarm Bell 627 Call Register Signal And Vf Door Operator 628 False Ceiling In Car 629 Vandal Proof S.S. Button With S.S. Cover 630 Firemans Switch 631 Infra Red Door Screen 632 Full Car Operating Panel 633 3 Way Intercom / Press And Speak Phone 634 Push Button - Orange L E D Illumination 635 Dot Matrix Led D & P Indicators In Car & Landings -Orange Colour 636 Automatic Rescue Device 637 Minor Builders Work 638 Scaffolding 639 Floor Annunciator With Music 640 Braille Buttons 641 Sill Support 642 Lift License 643 Overload Warning Indicator With Audio Announcement 644 Pit Ladder 645 Auto Light & Fan Switch Off (Pod) 646 SUB HEAD - I: CIRCUIT CUM POINT WIRING 647 SWITCH CONTROL LIGHT POINTS 648 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 649 Group C 650 MCB CONTROL LIGHT POINTS 651 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) 652 Primary point controlled by one MCB. 653 Same as item above but Secondary point. i.e. Points to be looped with Primary pointwith 2.5 sqmm wire and Point wiring 654 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 655 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 656 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 657 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 658 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 659 2 x 10 sq. mm + 1 x 10 sq.mm earth wire 660 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 661 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 662 Supplying and fixingsuitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing3 pin 5/6 Amp modular socket outlet and 5/6 A modular switch, connection etc. as required. 663 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 664 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 665 Telephone socket outlet 666 SUBHEAD -II - FITTINGS & FIXTURES 667 Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mouted 4 ft. LED 668 Supply, Installation, Testing and Commissioning of 40W LED POST TOP LANTERN 669 Supply, Installation, Testing and Commissioning of 40W LED GATE LIGHT 670 Supply, Installation, Testing and Commissioning of9W (Nominal)Wall Bracket Light 671 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 672 SUBHEAD - III - DISTRIBUTION BOARDS 673 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 674 12 way, Double door 675 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 676 Single Pole 677 Single Pole Neutral 678 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 679 40 A 680 63 A 681 Supplying and fixing following rating, double pole, (single phaseand neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 682 40 A 683 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
28.
Housing Urban and Rular Development #9493817 Technical Bid
Tender For Kareli - Nurulla Road to Askari Market Road Block C and Block D Housing Scheme and Nurulla Road from Mahavir Chauraha to Karamat Ki Chowki near Sasur Khedari River and also till the connecting road - Clearing grass and removal of rubbish upto a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. 3 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 60 metres as per instructions of E-I-C. (By Mechanical means). 4 i) Cement Concrete 5 ii) Reinforced cement concrete/ R.B. 6 Dismantling of flexible pavements and disposal of dismantled material up to a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical specification Clause 202. Bituminous / Granular Courses (By Mechanical means) 7 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 8 Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including T&P, Earthwork and Dismantling of Masonry Works. 9 (i) Up to 600 mm dia 10 Removal of telephone / Electric poles / Street light / Lamp post including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately 11 Disposal of moorum/building rubbish malba/ similar unserviceable, dismantled or waste material by mechanical transport Including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note- Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. 12 Dewatering using 10HP to 70HP diesel engine pump set including Hire charges, cost of Diesel, Engine oil, pump operator, labor charges, conveyance of pump set and fuel to site and back, loading, unloading and any other incidental charges etc., complete. (Hire charges for Diesel Pump set for 10 HP) 13 [B] Bill No. 2 - Earthworks 14 Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m 15 Removal of unserviceable soil including excavation loading and disposal but excluding replacement by suitable soil which shall be paid separately as per clause 305 16 i) Lead upto 1000 M 17 ii) Lead upto 8000 M 18 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out construction of shoring and bracing, removal of stumps and other deleterious matter dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work. 19 Mechanical Means (Depth upto 1.5 m) 20 i) Excavation 21 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 22 [C] Bill no. 3 - Development of Carriageway 23 Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 5 - 7% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fited on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP- 72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipments to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic TyreRoller (20 Tonne) 24 SAMI LAYERProviding and laying Stress Absorbing Membrane Interlayer (SAMI)/bitumen impregnated geotextile layer after clearing of the road surface geotextile conforming to physical requirements of claues 703-3, laid over a tack coat of paving grade Bitumen 80- 100 penetration, laid at the rate of 1.05 kg per sqm over thoroughly cleaned and repaired surface to provide a water resistance membrane and crack retarding layer paving fabric to be free of wrinkling and folding and to be laid before cooling of tack coat, brooming and rolling of surface with pneumatic roller to maximise paving fabric contact with pavement Surface. 25 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Tack Coat on Bituminous surfaces ) 26 Providing and laying 40mmthickBitumencarpete(B.C.) with 100-120 TPh hot mix plant producing and average output of 75 tonege par hour using crushed aggregates of specified grading premixed with bitumen binder(VG-30) @ 5.40% of mix as per MOST specification clause. etc all comp of work. 27 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from aggregat aggregate natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall. be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 28 M.S. (TOR steel or plain) in plain work such as RCC or RB work including binding for proper shape and including supply of steel and its wastage bend, hooks and authorized overlapping shall be measured and including cost of binding wire. Excluding GST (SOR-504). 29 [D] Bill No. 4 - Pedestrian Infrastructure (Footpath) 30 Sand Filling in Foundation Trenches as per Drawing & Technical Specification and as per direction of Engineer-in-charge. (including beneath all paver blocks, cobble areas for levelling purpose, etc.) 31 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (PCC below all paving area, Kerb Channel, Road edge kerb, Table top, Property edge beam) 32 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 33 i) For Grading-I Material 34 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications, PCC Grade M30using batching plant transit mixer & manual placing(80 mm thickness) r & manual placingand giving broom finish. (PCC with broom finish thickness 80 mm) 35 Providing and laying 75mm thick M-30 grade batch mix cement concrete and Applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer-in-Charge. The process shall include the following:-The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the hole surface to be stamped is completed within the time while concrete is in plastic stage of setting.After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per theequirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface.The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) 36 80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. 37 Supply and fixing of Tactile indicators made from SS-304 grade stainless steel. Warning Tactile indicator Shall be installed on the walking surface in a raised grid pattern of dots or stud. Minimum 36 studs to be placed in 300X300 mm area. Dimensions - 35mm Outer Dia x25mm Inner Dia, Stem Dia 8mmx12mm, Weight - 28grm.All the indicator will be installed into correctly drilled holes and place any suitable adhesive, All the indicators shall be aligned property, all complete as per direction of Engineer-in-charge. 38 Supply & fixing of Tactile indicators made from SS-304 grade stainless steel. Directorial Tactile indicator shall be installed on walking surface, consisting of a series of raised bar/strip. Min 4 bars/strip to be placed in direction perpendicular to distance of travel in 300X300 mm area. Dimensions-280mm L x 35mm W x 4.5mm, Stem Dia 8mmx12mm, Weight - 250grm All the indicator will be installed into correctly drilled holes and place any suitable adhesive, All the indicators shall be aligned property., all complete as per direction of Engineer-in-charge. 39 Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colors and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 40 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR-11.20) 41 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. (Saucer drain along the road edge, Curved Kerbs at Property Entry/Exit, Curved Kerbs at side roads) 42 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 43 CC Grade M20 using batching plant transit mixer & manual placing all complete as per direction of E-I-C. 44 [E] Bill No. 5 -Parking 45 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 46 i) For Grading-I Material 47 Supplying and filling in plinth with sand under floors/in trenches, including watering, ramming, consolidating and dressing all complete with material (from source to site), labor and T&P etc. required for proper completion of the work. (Including Royalty). 48 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days and giving broom finish. (PCC) 49 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. 50 [F] Bill No. 6 -Cycle track 51 Nil 52 [G] Bill No. 7 - Traffic Signs, Markings and Other Road Appurtenances 53 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer[1]in-Charge.(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 54 Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-impact Polystyrene) or Acrylonitrile Butadiene Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4260. The Reflective panels shall consist, of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. Lenses shall be moulded of methyl methacrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably ba 5+/.5 degree lo base and the area of each retro -reflecting surface shall not be less than 13.00 $Q.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the Engineer . In addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are, displaced , damaged . get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer , at his own cost. The rate shall include all materials, labor, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge, 55 RPM With Shank 56 Solar Power Road Marker The solar studs shall be made of aluminum alloy and polycarbonate material which shall be absolutely weather resistant and strong enough to support to load of 13,635 kg tested in accordance with ASTM D4280. Its color may be white, red, yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirements of IP 65 in accordance with IS: 12063:1987 category 2 for the protection against water ingress. The dimensions of solar studs shall not be less than 100 mm * 100 mm * 10 mm. It shall have super bright LEDs so as the provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. Its should be able to give the prescribed performance in the temperature range of -40 degree C to +55 degree C. Its life shall be not less than 3 Years. The rate shall include all material, labor, equipments, fabrication, transportation erection, installation and incidentals all complete as per direction of the engineer-in-charge 57 R.CC work (1:1.5:3) (M-20) with cement course sand &20mm the stone grit including all complete cement concrete with cement sand &20mm gauge stone Grit with the proportion of (1:1.5:3)including all complete the work (MORTH RA-12.8 C, Case-II) 58 M.S. or Iron work plain or Tor for RCC work including cutting, bending, rivetting or welding etc. where necessary. Excluding GST (S.I.No-504) 59 Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces 60 M.S. or Iron work of heavy sizes section such as Trusses, built up gates, record racks, roof work, gates etc. Including rivetting or welding where necessary. Excluding GST (S.I.No-503) 61 Painting of M.S. Grill with enamul paint etc all complete work. (S.I. 15.15 new item no.) 62 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 63 Providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IVvide clause 801.3, 2mm thick aluminum sheeting, 1.5 mm thick supported on mild steel angle iron post 75mm* 75mm *6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm* 45cm*60 cm, 60 cm below ground level as per the approved drawing. The retroreflective sheeting shall be tested for a certificate of having the sheeting coefficient of retro reflection, daytime, color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoors weathering and its having passed these tests shall be obtained from international/ government laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be also obtained from Indian condition within 3 years of launching ofproduct by the manufacturing abroad. Alternatively, a certificate conforming to ASTM specification (D4956-09) on Artificial accelerated weathering requirement from a reputed laboratory in India can be accepted provisionally. In such a situation , the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of 3 years outdoor weathering of the sheeting as per IRC 67:2012 . Legends, letters, numerals, and borders etc. should be as per MoRT&H specification 801.3.7. Proof of the same in form of government reports shall be uploaded while quoting tender. 64 90 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 65 60 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 66 60 cm circular with diffinitation plate size (20cm x 60 cm) 67 80mm x 60mm rectangularwith diffinitation plate size (20cm x 60 cm) 68 60 mm x 45 mm rectangularwith diffinitationplate size (20cm x 60 cm) 69 60cm x 60cm square with diffinitation plate size (20cm x 60 cm) 70 90 cm high octagon 71 Direction and place Identification signs up to 0.90 sqm size Board Providing and erecting direction and place identification retro-reflectorized sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/ Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MoRT&H specification No-801.3.7. Sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60cm., below ground level as per approved drawing, complete. 72 Direction and place Identification signs with size more than 0.90 sqm size BoardProviding and erecting direction and place identification retro-reflectorized sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility. liner removal, adhesion, Impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MoRT&H specification No-801.3.7. Sheet fixed over aluminum sheeting 2 mm thick with area exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing, complete. 73 Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per IRC :67 74 Brick Masonry Work in Cement Mortar 1:4 (1Cement: 4 Coarse Sand) in Foundation complete with Cement Concrete Bricks procured from C&D Waste Recycling Plant Baswar excluding Pointing and Plastering, as per Drawing and Technical Specifications. 75 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 finerness modulus.SOR 2022 SI no574 76 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement :3 sand)and as per direction of Engineer in charge. 77 Finishing walls with ready mixed Premium acrylic emulsion paint (company depot tinted) having Volatile Organic Compound (VOC)less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali, & fungal resistance, dirt resistance exterior paint of required shade with silicon additive(for painting wall, street furniture) New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm) 78 Supplying and Fixing of cast iron antique style bench having weight of sides not less than 72 kg (36 kg each) fitted with fibre rectangle strip (should not be less than 50 mm X 25 mm and 1.6mm thick. Length of Bench should not be less than 6 ft (end to end of castiron support). 79 [H] Bill no. 8 - Utility and street light cabling 80 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(PCC below pipe of Storm water, Sewer, Water, Inspection chamber for storm water, telecom chamber, power chamber and sewer) 81 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (Storm water, sewer) 82 600 mm dia RCC pipes 83 Providing of 7- Way 40mm Multi Ducts with solid permanently solidly lubricated Silicone in inner layer for ICT fiber cables conforming to ASTM F 2160, ASTM D 2444 and /or equivalent Indian standard. External Sheathshall be in Orange Colorand shall be free from visual defects like blisters, shrink holes,flaking, scratches, groove lines & surface roughness. The color of the 7 nos. PLB HDPE ducts shall be Green, blue, yellow, Brown, violet, Grey , Red for differentiation. Outer sheet thicknessshall be 1.2mm +/-0.2mm. The inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. Wall thickness(mm) of each of the ducts Excluding rib height shall be 2.9mm +/- 0.3mm. ISO Requirements- ISO 9001, 14001, 18001, complete as per specifications and directions of Engineer-in-charge. (7 way multi utility duct for OFC) 84 Supply of HDPE pipe of size 110mm for distribution system conformingn to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in-charge.110mm dia HDPE pipe PN-6 class PE-100 85 Supply of HDPE pipe of size 63mm for distribution system conformingn to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in-charge.63mm dia HDPE pipe PN-6 class PE-100 86 RCC Grade M20 using batching plant transit mixer & manual placing ( Side wall, bottom slab for all inspection chamber i.e. storm water, telecom, power, sewer, water) 87 Supply and installation on site - Recessed double seal ofwith a clear opening of750*750 mm DI manhole cover and frame(material- ductile iron grade 500/7) of class B125 having minimum load capacity 125 KN Load as per EN124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by Engineer in chargedesign approved by Engineer in charge. 88 Supply and installation on site - Recessed double seal ofwith a clear opening of750*750 mm DI manhole cover and frame(material- ductile iron grade 500/7) of class D400 having minimum load capacity 400 KN Load as per EN124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by Engineer in chargedesign approved by Engineer in charge. (storm water) 89 Supply and fixing Gully Grates RED 048 GRH – 300* 750mm D.I. GULLY GRATE & FRAME IN D400 LOAD CLASS , as per BS EN 124 Black Bitumen Paint, all complete as per direction of Engineer-in-charge. 90 Constructing rcc rectangular type manholewith a floating coat of neat cement, foundation concrete 1:6:12mix (1 cement : 6 coarse sand : 12 graded brick bats 40 mm nominal size), and making necessary channel in cement concrete of M-25 grade finished with a floating coat of neat cement, all complete as per standard design and instruction of E-I-C. 91 Restoration of water pipeline in case of damage 92 [I] Bill no. 9 - Horticulture / Landscaping works 93 Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. 94 Supplying and stacking of good earth at site including royalty but including carriage1km (earth measusred in stacks will be reduced by 20% for payment). 95 Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 96 Mixing earth and manure in specified proportion or as directed. 97 Rough dressing the trenched ground including breaking the clods. 98 Fine dressing the ground 99 Spreading ofmixed good earth and manure in specified proportions as above and in required thickness. 100 Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. 101 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 102 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 103 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete. 104 Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 105 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 106 Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. 107 Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 108 Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 109 Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.. 110 Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.. 111 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. 112 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 113 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge. 114 Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. 115 Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 116 Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. 117 Providing and fixing MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 Nos (25 x 6 mm) and 8 Nos (25 x 3 mm) vertical MS riveted to 3 Nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects. 118 Street Light Works (Excluding GST) 119 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect 120 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Cat: AAA 121 Supply and laying of 16 sq.mm. 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 122 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. 123 Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia38mm terminal Dia 12 mm ,outer GIpipe of 16 SWG and inner GI pipe of 12 SWG withHot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 124 Making Connection of each street light by S/L 1.5 sqmm FRLSH copper wire complete as per Direction of engineer in charge. 125 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 126 Supply & Laying of 63 mm Dia (OD-63 mm & ID- 51 mm Nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 127 Supply and fixing for automatic street light cubical control Juction Box painted with anti-corrosive alkali and acid proof pait consisting of 6 Amps MCB (B - Curve) complete in all respect 128 Supply and fixing of 16 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 129 Supply and fixing of 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 130 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 131 Supply/ erection of surface mounted decorative pole 4500 mm long having Base plate 300x300x12 mm with the bottom dia 139 mm upto 1 mtr long with the thickness of 3.6 mm and the top dia is 76 mm upto 3.5 mtr. Log. Decorative pole made out of Galvanized iron tube with cast Aluminium embellishments. The poles are painted with Polyturetnane paint. The pole have service window at the bottom on the pole for housing the MCB and terminal strips and as per attached drawings. 132 S/F of Single Arm decorative Bracket 100 mm long made of Cast iron/ Aluminium embellishments painted with Polyturetnane paint. 133 Supply of LED decorative drop down light made of aluminium housing fitted with polycarbonate diffuser having 500 mm dia with 70 w. 134 Supplyandlayingof aluminiumconductorPVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 135 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN 136 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm 137 Supply & Laying of 63 mm Dia (OD-63 mm & ID- 51 mm Nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 138 Supply and Laying 6 swg G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. 139 Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia38mm terminal Dia 12 mm ,outer GIpipe of 16 SWG and inner GI pipe of 12 SWG withHot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 140 Part - B Utility Shifting (Including GST) 141 Converstion of LT Overhead Line by Underground LT Line 142 LT XLPE insulated cable of size 3.5x400 sqmm. 143 LT XLPE insulated cable of size 3.5x240 sqmm. 144 LT XLPE insulated cable of size 3.5x150 sqmm. 145 LT XLPE insulated cable of size 3.5x70 sqmm. 146 9 mtr long stp 147 HDPE Pipe 140mm dia PEB0, PN-6 148 HDPE Pipe 120 mm dia PEB0, PN-6 149 HDPE Pipe 75 mm dia P880, PN-6 150 Aluminium Crimping Lugs 400sqmm 151 Aluminium Crimping Lugs 240sqmm 152 Aluminium Crimping Lugs 150sqmm 153 Aluminium Crimping Lugs 70sqmm 154 6 SWG G.l. wire for earthing along cables. 155 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x400 Sqmm. LT Cable 156 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x240 Sqmm. LT Cable 157 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x150 Sqmm. LT Cable 158 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x70 Sqmm. LT Cable 159 MAIN LT PANEL AT SUB STATION- 400 KVA (Type A-2)lncomer- 1 Set of 800 Amp. TP MCCB with Spreader & Extended handleMetering on lncomer - 1 Set of Digital Ammeter with ASS- 1 Set of Digatal Voltmeter with VSS- 1 Set of LED type Phase lndicating Light (22.5 mm.)with Control MCBsOutgoing- 6 Set of 250 Amp. TP MCCB with Spreader & Extended handte( 5 Nos. + 1 No. for capacitor panel)- 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle 160 MAIN LT PANEL AT SUB STATTON- 250 KVA (Type A-2) lncomer- 1 No. 630 Amp. TP MDO ACB with Inbuilt MPR Release with I onToff tnai.ating LightMetering on lncomer - 1 Set of Digital Ammeter with ASS- I Set olDigital Volt-meLer wirh VSS- 1 Set of LED type Phase Indicating Light (22.5 mm.J with Control MCBs Outgoing - 5 Set of 250 Amp. TP MCCB with Spreader & Exrended handle- 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle flnstallation ofLT Distribution Boards for LT underground system (Type A,B&CJ) 161 Supply , installation, testing & commissioning of outdoor type feeder pillar panetto be made of 2 mm CRCA sheet and covers will be j.6mm CRCA sheet dulypowder coated paint with 300 amps Al. busbar. (Type-B2)lncomer - 250 Amp. TP MCCB - 1 No.Outgoing - 63 Amp. TP MCCB - 5 Nos.lnstallation of LT Distribution Boards forLT underground system (Type-A, B & C) 162 Outdoor type feeder pillar panel to be made of 2 mm CRCA sheet and covers will be 1.6mm CRCA sheet duly powder coated paint with 300 amps Al. busbar. [Type-B3] Incomer - 100 Amp. TP MCCB - 1 No. Outgoing - 63 Amp. TP MCCB - 4 Nos.lnstallation of LT Distribution Boards for LT qnderground system [Tvpe-A, B & Cl 163 Lockable distribution boxes of size 450X400mm with bus bar 100 Amp. TPN to feed upto 10 houses (Type C) 164 XLPE LT Service armoured Cable for single phase,2x6 sq. mm.(pVC armoured Consumer Service Cablel 165 XLPE LT Service armoured Cable for single phase,2x10 sq. mm.(pVC armoured Consumer Service CableJ 166 XLPE LT Service armoured Cable for three phase,4x10 sq. mm.[pVC armoured Consumer Service Cablel 167 XLPE LT Service armoured Cable for three phase,4x1.6 sq. mm.(pVC armoured Consumer Service Cablel 168 XLPE LT Service armoured Cable for three phase,4x25 sq. mm.(PVC armou[ed Consumer Service Cable) 169 PVC PIPE 32 MM DIA 170 PVC PIPE 50 MM DIA 171 Electronic KWH Meter 1PX2W with Box. For single phase consumer 172 Electronic KWH Meter 3PX4W Static meter with Box.For three phase consumer 173 carriage , Laying of 3.5Cx400 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 140 mm dia. 174 carriage, Laying of 3.5Cx150/240 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 1.20 mm dia. 175 carriage ,Laying of 3.5CX70 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 75mm dia. 176 Painting of STP incuding paints [2 ltr red oxide and 2 Ltr Alluminum paint for each pole.l 177 Grouting of ST pole 178 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 179 Conversion of 11KV Overhead/Underground Line by 11KV Line Underground 180 11 Kv cable size 3x185 sq.mm XLPE 181 STP 11M-IS 410 SP-55 182 G.l pipe 4 dia 183 TOP channel 100x50x2240 mm 184 HDPE Pipe 160 mm dia PE 80, pN-6 185 Service clamp O/S 186 Clamp for fixing pipe to pole 187 11 Kv cable jointing kit size 3x185 sq.mm XLPE O/D 188 11 Kv cable jointing kit size 3x185 sq.mm XLPE S/T 189 Earthing complete. 190 M.S. Nut & Bolt with washer 191 Bracing angle 65x65x6x2700 mm with clamp 192 Stone Pad 193 Number plates with Clamp 194 Danger board & clamp with bolts & nuts 195 Stay complete 196 G I Barbed Wire 197 carriage , Layrng of 3X185 sq.mm size 11 KV XLPE insulated cable underground in HDPE pipe dia 160 mm. 198 Painting of STP incuding paints (2 Itr red oxide and Z Lt. Allrn inrm pal,1t for each pole.) 199 Grouting of ST pole 200 Grouting of Stay set 201 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 202 Conversion of 33KV Overhead/ Underground Line by 33KV Line underground 203 Cable Al. 3x300 sq.mm. XLPE 33 KV 204 STP 11M-IS 410 SP-55 205 G.l pipe 6 dia 206 M.S.Top channel 100x50x2240 mm 207 HDPE Pipe 200 mm dia PE 80, pN-6 208 Service clamp O/S 209 Clamp for fixing pipe to pole 210 Bracing angle 65x65x6x4300 mm with clamp 211 33 KV cable jointing kit 3X300 Se MM outdoor 212 33 KV cable jointing kit 3X300 Se MM Straight Through 213 Earthing of pole by MS earthing rod of 2OX25O0 mm & 6 SWG earthr.ng wire etc. 214 M.S. Nut & Bolt with washer 215 Number plates with Clamp 216 Danger board & clamp with bolts & nuts 217 Stay complete (Stay rod 15X1800mm, Stay wire 5 KG,, Stay clamp, Boult & nut rvith grouting 218 Daner bqard barbed wire includin jumpering 219 carriage , Layrng of 3X300 sq.mm size 33 KV XLPE insulated cable underground in HDPE pipe dia 200 mm. 220 Painting of STP incuding paints (2 Itr red oxide and Z Lt. Allrn inrm pal,1t for each pole.) 221 Grouting of ST pole 222 Grouting of Stay set 223 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 224 INSTALLATION OF 250 KVA TRANSFORMER ON DP FOR THE SHIFTING OF 3 No. 250 KVA. 9 No.400 KVA & 3 NO. 630 KVA TRANSFORMER 225 STP 11M-IS 410 SP-55 226 MS channel 100x50x2240 mm 227 SERVICE CLAMP FOR ROUND POLE 228 M.S. BOLT AND NUTS OFF SIZE WITH WASHER 229 L.T. CABLE 3.5OX4OO SO M 230 LTXLPE Insulated,Unarmoured Aluminium Singlc Corc Cable,1x240sq. mm.Sizc 231 LT XLPE Insulatcd,Unarmoured Aluminium Singlc Core Cablc,1x400 sq. mm.Size 232 EARTHING OF 250 KVA T/F WITH G.I. PIP[ 233 EARTHING ROD COMPLET. 234 1 1 KV D.O. FI]SE SETS 235 1 1 KV TPMO 236 D.D. WIRE 70 qs mm 237 250 KVA T/F 238 L.T. CUBICAL B0X complete 239 L,T. CABLE 3.50X240 SQ MM 240 STAY SET COMPLETE, 241 ALUMINIMUM LUG 70 SQMM 242 ALUMINIMUM LUG 240 SQMM 243 ALUMINIMUM LUG 400 SQMM 244 PVC TAPE 245 T/F BUSHING CONNECTOR OF COPPER STRIP 246 Labour , Cartage & Errection Charges and Dismentaling of existing T/F 247 Dismentling and Cartage from site to store Charges 7% (Other Misclenous Charges)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Uttar Pradesh View Result →
29.
Housing Urban and Rular Development #9443229 Technical Bid
Tender For Tourism Development And Beautification Works Of Khidariya Mandir And Shiv Temple At Padrauna District Kushinagar, 1 Yatri Hall Building (Civil) 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 3 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift 4 Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors. 5 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 6 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mmapart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor 7 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) All work up to plinth level : 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR SLAB] 10 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR BEAM] 11 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR COLUMN] 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in.foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 14 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. 15 (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured 16 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 17 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) [Plinth Plaster] 18 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) 19 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 20 12 mm cement plaster in ceiling to finshed even and smooth with mix of 1 cement : 4 coarse sand.( Ceiling plaster) 21 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the costof nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 22 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the approved make & colours) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 23 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). 24 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour. New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre(For Internal wall surface) 25 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 26 Making of draing along with apron 150 X 150 MM 27 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 28 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 29 (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 30 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 31 Hold fast for chaukhats of doors/windows. 32 Door / windows & Staircase grill. 33 Angle iron chaukhats size 40x40x5 34 Z Section steel window 35 Fixing of Door, windows/ventilators chaukhats in position. 36 (a) Door 37 (b) Windows 38 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/ sqm). 39 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 40 Providing & fixingAluminiumsliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm. 41 Providing and fixingAluminium. anodised towerbolts (barrel type) with necessary screws etc. complete. 42 (a)250 mm x 10mm 43 (b) 200 mm x 10mm 44 Providing and fixing S.S anodised handles with screws etc. complete (a) 125 mm. 45 Centering and shuttering including strutting, propping etc. and removal of form for 46 Foundations, footings, bases of columns, etc. for mass concrete 47 Suspended floors, roofs, landings, balconies and access platform 48 Lintels, beams, plinth beams, girders, bressumers andcantilevers 49 Columns, Pillars, Piers, Abutments, Posts and Struts 50 Providing and fixing art work of YATRI HALL Window arch required size and shape Elevational work & other oramental work included in over all rates complete in all respect 51 Providing and fixing sand stone chattriwork of YATRI HALL terrace in four corner required size and shape Elevational work & other oramentalwork included in over all rates complete in all respect 52 Rain Water Pipe 53 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 54 a) 110mm diameter 55 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 56 a) 110mm 57 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 58 Electrical Works 59 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 60 Group C 61 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 62 Submains : 63 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 64 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 65 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 66 4 X 6 sq. mm + 2 X 6 sq. mm earth wire 67 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 68 20 mm 69 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 70 5/6 A switch 71 3 pin 5/6 A socket outlet 72 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 73 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 74 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 75 1 or 2 Module (75mmX75mm) 76 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 77 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 78 MCBs & DB’s : 79 Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 80 4 way (4 + 12), Double door 81 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 82 4 way (4 + 12), Double door 83 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 84 Single pole 85 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 86 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 87 100 A,30KA,FPMCCB 88 Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. CAT A 89 Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A 90 ELCB/RCCB Switches : 91 Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 92 40 A 93 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 94 Earthing Work : 95 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 96 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 97 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 98 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 99 100 mm width X 50 mm depth X 1.6 mm thickness 100 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 101 Lighting Fixtures (Lights/Fans) : 102 Supply and fixing of Single light Wall Bracketon matching M.D.F.E.G. Board base etc.Complete in all respect. CAT. - AAA 103 Supply and fixing of LED Tube Light fitting suitable for up to 1X22 Watt LED Tube Light on surface complete in all Respect . 104 Supply & fixing of recess mounting round 10 to 15 watt LED down Lighter complete in all respect. 105 Armoured Cables (Cable/Gland/Lug) : 106 Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 107 size 25 sq mm x 3-1/2core 108 Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earthas per direction of engineer-incharge. for cable 109 size 25 sq mm x 3-1/2core 110 Supply and fixing ofplain or pin type copper tin plated cable socket (lug) to cable leadsfor pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable 111 size 25 sq mm 112 Miscellaneous Items : 113 S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. 114 Toilet Block 115 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 116 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift 117 Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors. 118 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 119 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mmapart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor 120 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 121 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 122 Lintel 123 G.F. 124 Slab (Using 1:1.5:3 Mix concrete). 125 G.F. 126 Beams (Using 1:1.5:3 Mix concrete). 127 G.F. 128 Column (Using 1:1.5:3 Mix concrete). 129 G.F. 130 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 131 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 132 Foundation (Using 1:1.5:3 Mix concrete). 133 M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 134 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 135 NOT REQUIRED 136 Painting on D.P.C with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 Kg/Sq. M. approx including cost of fuel if any. 137 M-150 Brick work in super-structure above plinth level up to floor fifth level includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand) 138 Same as in item no. 16 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 139 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. 140 (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured 141 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 142 (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 143 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 144 Hold fast for chaukhats of doors/windows. 145 Door / windows & Staircase grill. 146 Angle iron chaukhats size 40x40x5 147 Z Section steel window 148 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 149 Fixing of Door, windows/ventilators chaukhats in position. 150 (a) Door 151 (b) Windows 152 (c) Ventilator chaukhats 153 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) [Plinth Plaster] 154 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 155 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) 156 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the costof nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 157 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 158 Size of Tile 600x600 mm 159 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 160 Size of Tile 600x600 mm 161 P/L 25mm thick kota stone flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. 162 P/L Kota stone slab 25 mm thick in riser of steps,skirting,dado & pillers laid on 10 mm thick mortar 1:3 (1 cement : 3 coarse sand), jointed with grey cement slurry mixed with pigment to match the shade of slabs including rubbing and polishing complete. 163 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 164 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 165 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). 166 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour. New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre(For Internal wall surface) 167 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 168 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/ sqm). 169 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 170 Providing & fixingAluminiumsliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm. 171 Providing and fixingAluminium. anodised towerbolts (barrel type) with necessary screws etc. complete. 172 (a)250 mm x 10mm 173 (a) 200 mm x 10mm 174 Providing and fixing S.S anodised handles with screws etc. complete (a) 125 mm. 175 Making drain along with the apron. 176 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 177 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 178 Providing and fixing sand stone art work of verandaha arch 3 nos required size and shape Elevational work& other oramental workincluded in over all rates complete in all respect. 179 Centering and shuttering including strutting, propping etc. and removal of form for : 180 (a) Suspended floors, roofs, landings, balconies and access platform 181 (b) Lintels, beams, plinth beams, girders, bressumers and cantilevers 182 (c) Foundations, footings, bases of columns, etc. for mass concrete 183 (d) Columns, Pillars, Piers, Abutments, Posts and Struts 184 ELECTRICAL WORK 185 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C (Light Point) 186 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C (Fan Point) 187 Wiring point for exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash. 188 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch socket, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Plug and conduit) 189 Wiring forcircuit / submainwiringalongwith earth wire withthe following sizes of FRLS PVC insulated, copper conductor single core cable insurface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. 190 Wiring forcircuit / submainwiringalongwith earth wire withthe following sizes of FRLS PVC insulated, copper conductor single core cable insurface/ recessed medium class PVC conduit as required. 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire 191 Wiring forcircuit / submainwiringalongwith earth wire withthe following sizes of FRLS PVC insulated, copper conductor single core cable insurface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. 192 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 4 way (4 + 12), Double door 193 Supply and fixing of single pole MCB blanking plate 194 CAT A 195 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 196 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep 197 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.. 198 CABLES 199 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 200 50 sqmm 3.5 core 201 Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire 202 50 sqmm 3.5 core 203 Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 204 100 mm Dia 205 water supply & plumbingWORK 206 Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. 207 Orissa Pattern W.C. pan of size580x 440mwith integral type foot rests flush pipe and over flow arrangement. 208 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 209 W.C. pan with ISI marked black solid plastic seat and lid 210 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mmbrass pillar taps, brass chain with rubber plug, 32mmbrass waste of standard pattern including cutting & making good the walls wherever required. 211 a)White Vitreous China Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar taps 212 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the wallsand floors wherever required : 213 Range of two half stall urinals with 5 litre P.V.C.automatic flushing cistern 214 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 215 32 mm dia (for wash basin) 216 40 mm dia(for sink and urinal) 217 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 218 Providing & fixing PTMT towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw 450mm. Long with total length of 495mm, width 78mm and effective height of 88mm 219 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 220 Providing and fixing unplasticised PVC connection pipe with brass unions 221 45 cm length 222 15 mm nominal bore 223 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 224 a) 15 mm nominal bore 225 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 226 a) 15 mm nominal bore 227 PVC PIPES & FITTINGS AND RAN WATER PIPES 228 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 229 110 mm 230 75 mm dia 231 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 232 110 mm 233 75 mm dia 234 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. 235 Coupler 236 110 mm 237 Bend 87.5° 238 110 mm bend 239 75 mm bend 240 Shoe plain 241 110 mm bend 242 75 mm bend 243 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 244 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 245 INTERNAL & EXTERNAL WATER SUPPLY WORKS 246 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 247 20 mm dia nominal outer dia 248 Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. 249 Exposed on wall.(internal work) 250 15mm dia nominal bore 251 20mm dia nominal bore 252 25mm dia nominal bore 253 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality. 254 15mm dia nominal bore. 255 20mm dia nominal bore. 256 25mm dia nominal bore. 257 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork) : 258 15mm dia nominal bore. 259 20mm dia nominal bore. 260 25mm dia nominal bore. 261 Providing and fixing gun metal gate valve with wheel of approved quality. 262 25mm dia nominal bore 263 Providing and fixing brass stop cock of approved quality : 264 20 mm nominal bore 265 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 266 SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - IV 267 Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. 268 a) Pipes 80mm to 300mm diameter. 269 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 270 a) 150mm diameter 271 Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 272 a) 150mm diameter 273 P & fixing square mouth S.W. Gully trap grade A comp. with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 & water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg & frame to be not less than 2.70 Kg as per standard design. 274 a) 150 x 100 mm. size P type 275 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 276 nside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets : 277 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 278 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 279 With 20x20 mm square bar 280 SOAK PIT & SEPTIK TANK 281 Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. 282 In all kind of soil upto 1.5m depth 283 In all kind of soil upto 1.5m to 3.0m. depth 284 In all kind of soil upto 3.0m to 4.5m. depth 285 Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size) 286 Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) 287 Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. 288 TMT Fe-500 or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 289 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) 290 Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. 291 Providing and fixing C.I. tee at the inlet and outlet of septic tank. 292 Providing & fixing 75mm dia vent pipes. 293 Providing & fixing of 75mm dia cast iron terminal guard. 294 Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. 295 M.D. -10- Circular shape 500mm internal diameter 296 M.D. -2.5- Circular shape 450mm internal diameter 297 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks 298 Drain 300X450 (70 RM) 299 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 300 Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors. 301 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in.foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) 302 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 coarse sand) 303 25 mm cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregate of size 12.5 mm and below by volume) laid over set and hardened surface of sturctural slab or base concretefinished with a floating coat of neat cement using cement . 304 Interloking Flooring 297 SQM 305 Earth work in Excavation in trenches for foundations pipes cable etc in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 50 meter and including filling, watering and ramming of excavated earthdisposal of sur-plus earth as directed by the Engineer incharge up to a distance of 50 meters from the foundation trenches. (DSR 2.8.1) 306 Providing and layingin cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost ofform-work, in foundation and floors. DSR 4.1.8 307 M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 308 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 309 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern 310 SAND STONE FLOORING KUND STEP (280 Sqm) 311 Earth work in Excavation in trenches for foundations pipes cable etc in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 50 meter and including filling, watering and ramming of excavated earthdisposal of sur-plus earth as directed by the Engineer incharge up to a distance of 50 meters from the foundation trenches. 312 Providing and layingin cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost ofform-work, in foundation and floors. 313 M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 314 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar 315 Red sand stone 316 STONE BENCHES-Supply, and fixing in position 3 seater sand Stone Benches, 1800*900*450 mm at site as per approved quality and design. including all cost of accesories, transportation etc. complete in all respect. 317 TREE CHABUTRA (3 Nos) 318 Earth work in excavation 319 P.C.C. 1:4:8 320 Brick work in 1:4in foundation. 321 12 MM thick plaster (1:3) 322 C.C. flooring 323 GRANIET FLOORING YATRI CHABUTRA (35 sqm) 324 Providing and layingin cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost ofform-work, in foundation and floors. DSR 4.1.8 325 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 326 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 327 Signage 328 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work with Engraving letters in hard stone on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. 329 Engraving letters in hard stone 330 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols andborders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. 331 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm 332 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side ofluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment) 333 SOLAR LIGHT (As per U.P.NEDA) (as per TS Estimate) 334 Boaring 335 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level, All types of soil 300 mm dia 336 Supplying, assembling, lowering of 110 mm pvc pipe and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia 337 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 338 150 mm nominal size dia 339 Supplying, filling, spreading & leveling coarse sand of size range 1.5n mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. 340 Providing and fixing M.S. clamp 4 dia of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 341 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix Inside size 90x80cms and 45cms deep. 342 Providing and fixing G.I.Pipe complete 40 mm dia 343 Supplying, & fixing of Nylon jali arround the slotted jali 344 Supply of 2 HP submersible pump varuna/KSB/CRI or equivalent make. 345 Supply of single phase strater for pump 346 Supply and fixing of flat cable for pump 2.50 sqm 3 core copper cable 347 100 mm dia PVC end Cap 348 GST Extra As per Applicable
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
30.
Educational and Research Institute #9426408 Technical Bid
Rate Contract For The Procurement Of Consumables/Non-Consumables For The Department Of Transfusion Medicine , Note:1.*Samples For Kits, Reagents And Consumables Marked With Star (*)/Brochure Listing Product Details/Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender. 2. #Samples For Kits, Reagents And Consumables Marked With Star (#), Distributor Authorization Letter From The Manufacturer Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender.3. In Case Of Non-Receipt Of Samplesas Specifed For Above Within One Week After Display Of E-Tender, An E-Mail Remainder (Mentioned In Tender Form) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled. Only Bidders Who Have Provides Samples Will Be Taken For Final Evaluation 4. Selection Will Be Made Only After Evaluation Of Samples/Brochure, Certificate/ Demonstration Etc.Consumables , Anti-A Grouping Sera Igm (Monoclonal)* (10 Ml Vials)Specifications For All Above Antiseras And Bovine Albumin (Item No: 1 To 13) 1. All Antiseras Should Meet Minimum Quality Control Specifications As Per Transfusion Medicine Technical Manual, 2Nd Edition, Pg.No: 346-351; Director General Health Services, Ministry Of Health And Family Welfare, Govt. Of India Publication2. The Manufacturers Should Have Supplied All Above Mentioned Antiseras And Bovine Albumin Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years.3. The Quantity Quoted May Be Increased Or Decreased Without Assigning Any Reasons. , Anti-B Grouping Sera Igm (Monoclonal)* (10 Ml Vials) , Anti-Ab Grouping Sera Igm (Monoclonal)* (10 Ml Vials) , Anti-D Grouping Sera Igm (Monoclonal)* (10 Ml Vials) , Anti-A1 (Lectin)* (5 Ml Vials) , Anti-D Igm + Igg Grouping Sera (Monoclonal)* (10 Ml Vials) , Anti-D Igg Grouping Sera (Monoclonal)* (10 Ml Vials) , Anti -D Igg Grouping Sera (Polyclonal)* (5 Ml Vials) , Anti -H (Lectin)* (5 Ml Vials) , Bovine Albumin 22%* (5 Ml Vials) , Anti Human Globulin Sera Igg+C3d (Polyspecifc)* (5 Ml Vials) , Anti Human Globulin Sera Igg (Monospecific)* (10 Ml Vials) , Anti Human Globulin Sera C3d (Monospecific)* (10 Ml Vials) , Instant Abd Blood Grouping Pad/Cards/Strips For Voluntary Blood Donation Camps. (Ready To Use For Blood Grouping Anti-A, Anti-B And Anti-D Igm)* Specifications:1. The Above Pad/Cards/Strips Should Be Approved By Statutory Authority Like Drug Control General Of India/National Inst. Of Biologicals. 2. The Pad/Cards/Stripes Should Contain Wells With Precoated Monoclonal Antisera With Color Coading And Suitable Medium/Matrix To Immobilize Agglutinated Red Cells So As Results Are Read Witin 30-45 Seconds3. The Pad/Cards/Strips Can Be Used At An Ambient Temperature Of 20-40Deg C. 4. It Should Compatible With All Types Of Blood Samples, Namely Whole Blood, Heparin, Finger Prick, Blood Bag Segments Etc.,5. It Should Easily Readable For 24 Hours After Testing,Fully Traceable By Photography/Other Media. 6. Should Be Able To Detect Weak Abd Antigens7. Necessary Dispensing Micro Pipettes/Pasteur Pipettes And Tips Should Be Provided Along With The Kits. 8. Necessary Buffers And Other Consumables Should Be Provided In Enough Quantity Including Wastage If Any For Complete Usage Of All Cards/Pads/Stripes Along With The Kits. 9. The Bidder/Supplier Should Provide Satisfactory Certificates From 3 Blood Banks Which Are Already Using Such Pads/Stripes/Cards.10. Product Should Be Ce Marked11. Expiry After Opening Minimum 14 Days , Copper Sulphate Cuso 4.5H2o - Ar Grade* (500 Gms) , Polygrid Test Tube Stand (For 12 X 100Mm) - 48 Tubes , Stands For Blood Grouping Antisera , Round Adhesive Wound Plaster - Disposable* (100 Nos) , Round Blood Lancets - Disposable And Sterile* (100 Nos) , Disposable Pasteur Pipettes 1 Ml.(500 Nos) , Disposable Pasteur Pipettes 3 Ml.(500 Nos) , Disposable Pasteur Pipettes 10 Ml.(500 Nos) , Blotting Paper (White Ordinary) 60 X 60 Cm* (500 Nos) , Cryo Gloves - Water Proof, Mid Arm, Size-Medium , Tissue Roll* , K3 Edta- Non-Vacuum Tubes 2 Ml* (100 Nos) , K3 Edta- Vacutainer 2 Ml* (100 Nos) , Vacutainer Needle With Holder And With Needle Protector (100 Nos) , Microtip Boxes 2-20 ?L -Autoclavable , Microtip Boxes 2-200 ?L -Autoclavable , Microtip Boxes 200-1000 ?L -Autoclavable , Acrylic Beakers - 50 Ml , Acrylic Beakers - 100 Ml , Acrylic Beakers - 250 Ml , Acrylic Beakers - 500 Ml , Conical Flask - 50 Ml , Conical Flask - 100 Ml , Conical Flask - 250 Ml , Conical Flask - 500 Ml , Conical Flask - 1000 Ml , Thermal Paper For Elisa Reader 110 X 20 (11 Cms Width)* , Pipette Stand (For 6 Pipettes) , Reagent Bottle Stand , Blood Bag/Ffp Storage Racks , Teepol Liquid Cleaner* (10 Litres) , Sodium Hypochlorite Solution 4%* (5 Litres) , Isopropyl Alcohol (500 Ml) , Electronic Thermometer (Wettable)-Range Upto Minus 80 , Surface Temperature Measuring Thermometer , Magnetic Stirrer Bar , Specific Gravity Meter-With Range 1.000 To 1.100 , Nageottes Chamber , Volumetric Flask -500 Ml , Mortar & Pestle , Capillary Tubes (100 Nos) , Ulex Europeus For Lectin Preparation-1Mg , Dolichos Biflorus For Lectin Preparation (1 Mg) , Arachis Hypogea For Lectin Preparation (1 Mg) , Thrombin From Bovine Plasma - Lyophilized Powder (1 Ku) , Protamine Sulfate Reagent (5 Gms.) , Epsilon Amino Caproic Acid-Reagent Grade (1 Gm) , Sodium Dihydrogen Phosphate-Reagent Grade (500 Gms.) , Disodium Hydrogen Phosphate -Reagent Grade (500 Gms.) , Bovine Albumin 6%-Reagent Grade (100 Ml) , Papain Powder-Reagent Grade (100 Gms.) , Ficin Powder-Reagent Grade (100 Gms.) , Phosphate Buffer Saline - Ph 7.4 (100 Ml) , Dithiothreitol (Dtt) (5 Gms.) , Glycine-Reagent Grade -500G , Glycine-Reagent Grade -0.1M , 2- Mercaptoethanol-Reagent Grade (100 Ml) , Chloroquine-Disphosphate-Reagent Grade (25 Gms.) , Wax Sealant (500 Gms.) , 3350 Mw Polythelene Glycol (500 Gms.) , L-Cysteine Hydrocholride Reagent Grade (25 Gms.) , Nacl (Lr) (500 Gms.) , Disodium Edta (500 Gms.) , Tris (Tris Hydroxymethyl) Aminomethane (25 Gms.) , Sodium Barbital-Reagent Grade (25 Gms.) , Ethyl Alcohol-Reagent Grade (500 Ml) , Erythrosin-Reagent Grade (25 Gms.) , Harris Haematoxylin Solution (500 Ml) , Glycerol Lactate (500 Ml) , Turks Solution (250 Ml) , Ph Strips 0.0-6.0 Ph, Resolution: 0.5 Ph Unit (50 Strips) , Ph Strips 6.0-7.7 Ph, Resolution: 0.3-0.4 Ph Unit (50 Strips) , Ph Strips 7.0-14.0 Ph, Resolution: 0.5 Ph Unit (50 Strips) , Ph Buffer Capsules (3 Standard Buffers- Ph 4, Ph 7 & Ph 10)-2 Each , Microtitre Plate U Bottom - 96 Wells (50 Plates) , Test Tubes With Rim (12X100 Mm) (100 Nos) , Test Tubes With Rim (12X75 Mm) (100 Nos) , Capillary Microhematocrit Tubes (2.9) (200 Nos) Specification:1. Size: Length: 75 Mm, Innder Diameter: 1.2 Mm, Wall: 0.2 Mm 2. Capacity: 70 Ul3. Ends Can Be Sealed With Sealing Clay 4. Interior Surface Of Heparinized Tubes Is Evenly Coated With Ammonium Heparin Which Will Not Interfere With Sodium Determination , Sterile Conical Tubes (100 Nos)Specification:1. Capacity: 15 Ml2. Length: 120 Mm 3. Width: 17 Mm 4. Material: Polypropelene5. Dome Top 6. Rcf: 12000 Rpm 7. Storage: -80°C , Sterile Conical Tubes (100 Nos)-50Ml , Sodium Hydroxide Powder (80-100 Mesh) Extrapure (500 Gms.) , Hydro Chloric Acid (500 Ml) , Citric Acid (> 99.5%) (500 Gms) , Potasium Citrate (500 Gms) , Tri-Sodium Citrate Dihydrate (500 Gms) , Sodium Azide (100 Gms) , Bromylin Crude Powder (100 Gms) , Chloroform (500 Ml) , Neutralizing Solution (24 Ml) , Digitonin (1 Gm) , Di-Ethyl Ether (500 Ml) , Ethanol 50%(500 Ml) , Methylene Chloride(500 Ml) , Xylene (500 Ml) , Chymotrypsin(1 Gm) , Vicia Graminea Lectin (Anti-N Lectin)(5 Ml) , Polybrene (5 Gms.) , Pronase (5 Gms.) , Trypsin (100 Gms.) , Di-Butyl Phthalate (500 Ml) , Di-Methyl Phthalate (500 G) , Sucrose (500 Gms.) , Di-Potasium Edta (500 Gms.) , Magnesium Chloride (100 Gms.) , Chromic Chloride (500 Gms.) , Chloramphenicol (5 Gms.) , Dextrose (500 Gms.) , Inosine (500 Gms.) , Neomycin Sulphate (5 Gms.) , Calcium Chloride (500 Gms.) , Sodium Bicarbonate (500 Gms.) , Sodium Carbonate (500 Gms.) , P Nitrophenyl Phosphate (25 Gms.) , Whatmans Filter Paper-100Mm (100 Nos) , Ficoll Hypaque (100 Ml) , Single Channel Variable Pipettes 20 -200 ?L* Technical Specifications For Single Channel Variable Pipettes (Item No: 130 To 132) 1.Extremely Light Pipetting Action By Tension Free Spring Mechanism2.Fully Autoclavable(121°C):Uv Resistant Material, 3.Volume Locking System4.Increments At Least 0.1?1 Fine Adjustment For Pipettes Expect For 100-1000 ?I Volume Pipette Where Increments Can Be Read As 0.5 ?I 5.Suitable For All Brands Of Tips.6.Adjustable For Variable Volume; Fixation Of Adjustable Volumes7.Three Defined Stops(Single Button Operation Preferred)A. Take Up From First Stop,B. Dispensing And Blow Out, C. Tip Ejection 8.Slim Pipette Shaft, 9.Cone For Standard Tips, 10. Safe Cone Filter Lock11. Easy And Safe Tip Ejector Mechanism., 12. Made Of Corrosion Proof Material.13. Accuracy <.98.5%, 14. Precision<. 99.4%, 14. 2 Years Warranty15. Returnable Samples Should Be Provided For Evaluation , Single Channel Variable Pipettes 100 -1000 ?L* , Single Channel Variable Pipettes 5-20 ?L* , Multi Channel Variable Pipettes 30 - 300 ?L*- 8 Channel Technical Specifications (Item No: 133 To 136) 1. Iso 8655 Certified Digital Multichannel Pipettes Of Variable Volume Suitable For All Brands Of Tips. 2. Pipetting Modes: Autodispense, Dispense, Pipetting, Pipetting And Mixing, Manual Pipetting, Sequential Pipetting And Dispensingrangeincrementprecisiontype 5 To 50?L 0.5 Ul2.0 To 0.7%8 Channel5 To 50?L 0.5 Ul2.0 To 0.7%12 Channel 30-300 ?L5 Ul1.5 To 0.3%8 Channel30-300 ?L5 Ul1.5 To 0.3%12 Channel 3.Extremely Light Pipetting Action By Tension Free Spring Mechanism 4. Fully Autoclavable(121°C):Uv Resistant Material 5.Volume Locking System6.Adjustable For Variable Volume;Fixation Of Adjustable Volumes7. Desirable: A History Function, Service Interval Warning, Sequential Tip Ejection8. Should Be Duly Ce Certified Or Approved9. 2 Years Warranty 10. Returnable Samples Should Be Provided For Evaluation , Multi Channel Variable Pipettes 30 - 300 ?L*- 12 Channel , Multi Channel Variable Pipettes 5 - 50 ?L*- 8 Channel , Multi Channel Variable Pipettes 5-50 ?L*- 12 Channel , Pipette Tips 2-20 Ul* (1000 Nos)Description: Used For Accurate Measurement Of Small Volume Fluid Dispensing. Useful For Safety Of Laboratory Personnelspecification: (Item No: 137 To 139)1. Compatible With International Standard Pipettes Attachable By Firm Grip 2. Available In Packs Of 1000 Tips3. Non Sticky In Nature4. Smooth Internal Surface 5. Pipette Should Be Clean, With Patent Tips That Are Sharp And Pointed6. Pink And Blue Transparent In Colour7. Should Not Be Made Of Reused Plastic , Pipette Tips 2-200 Ul* (1000 Nos) , Pipette Tips 200-1000 Ul* (1000 Nos) , Hemocue Cuvettes# (200 Nos) Specification:1. Compattible With Hemocue 301 Instrument+C2372. Should Be Able To Measure The Hb Using Blood From Finger Prickbased On Azide Methohemoglobin Method. , Cuvettes For Plasma Hemoglobin Estimation(100 Nos) Specification: 1. Compattible With Hemocueinstrument 2. Modified Azidemethemoglobin Method , Leishmans Stain Powder (100 Gms.) , Grams Stain Solution Kit , Methanol (5 Litres) , Sponge Ball For Blood Donors , Paper Tumbler For Drinking Milk - Donor Refreshment (100 Nos) , Test Tube - 5Ml With Clot Activator (100 Nos)-Non Vaccum , Test Tube - 5Ml With Clot Activator (100 Nos)-Vacutainer , Glass Slides (100 Nos) , Temperature - Sensitive Indicators (2-6°C) For Monitoring Red Cell Blood Bags , Blood Irradiation Indicator Labels , Autoclave Indicators , Oxygen Mask With All Sizes Venturie Adapter , Re-Breathing Bags - All Sizes , Round Bottom Test Tube (Without Rim: 12X75cm) (100 Nos) , Round Bottom Test Tube (Without Rim: 12X100cm) (100 Nos) , Test Tube Rack Stand For 72 Tubes , Test Tube Rack Standfor 18 Tubes , Vacutainer – 10 Ml Tube Sterile With Acda (100 Nos) , Measuring Cylinder - 250 Ml , Measuring Cylinder - 500 Ml , Measuring Cylinder - 1 Litre , Stainless Steal Forceps - 18 Inch , Storage Vial - 1 Ml (1000 Nos) , Storage Vial - 2 Ml (1000 Nos) , Storage Vial - 3 Ml (1000 Nos) , Storage Vial - 5 Ml (1000 Nos) , Storage Vial - 10 Ml (1000 Nos) , Sterile Microcentrifuge Tubes-0.5Ml (1000 Nos) , Sterile Microcentrifuge Tubes-1.5Ml (1000 Nos) , Papain Cystein Activated -1% W/V , Cell Pack For Hematology Analyser -20 L , Stomatolyser -500Ml , Cell Clean , Plasmalyte( For Cryo Preservation) , Acd Solution- 500 Ml , Autoclave Bags , Coagulation Reagents (Should Be Compatible With Meril Semi Automated Coagulometer-Merilyser) Pt Reagent-10 X 2 Ml , Aptt Reagent-10 X 2 Ml , Factor Viii Assay-3Ml , Fibrinogen- 20 Test , Coagulation Cuvettes-1000 , Calcium Chloride-10Ml , Note:* Item Nos From 184 To 203 - To Be Procure Only After Ascertaining Stock On Hand And Requirement At The Time Of Placement Of Supply Order. General Specification: ( Should Meet Technical Specification As Specified In Minutes Of Technical Specification Committee To Review Specifications Of Blood Bags For The Use In Blood Banks Held On 15-02-2017 Under Ministry Of Health Govt Of India New Delhi)1. Flexible Pre-Sterilized, 2. Pyrogen Free, 3. Non-Toxic, Non-Haemolytic, Biocompatible Material4. No Risk Of Contamination And Air Embolism (Closed System) With All Leak Proof Seals (Disposable Bags)5. Slit On The Both Sides Of The Bags Should Be Enough To Accommodate 5 – 10 Ml Volume Test Tubes6. The Capacity Of The Bag Should Be Enough To Prevent Any Ballooning/Rupture Of The Bag From The Seam When It Is Filled Up With The Requisite Volume Of Blood7. Flexible Non-Kinking, 8. Non-Sticking, 9. Transparent, 10. Leak-Proof, 11. The Tubing Should Have Same Id/Segment Number As That On The Bag12. The Tubes Should Have Multiple Printed Id/Segment Numbers, 13. Side Diversion Pouch, 14. 16 Gauge Ultra-Thin Walled And Straight, 15. Sharp Regular Margins And Beveled Tip22. Cpda-1 (49 Ml I.E. 14 Ml/100 Ml Of Blood) In Collecting Bag, 23. Sagm (100 Ml) In Satellite Bag,24. Clear & Colourless, 25. No Discolouration On Storage At Room Temperature 26. Manufacturer To Supply Anticoagulant Quality Check Certificate, 27. Non-Peal Off, Heat Sealed Labels, 28. Remain Attached Between Room Temperature To -800C With A Transparent Adhesive29. Date Of Manufacturing, Date Of Expiry And Lot Number Must Be Mentioned On Each Bag, 30. The Expiry Date Should Be At Least 2 Years From The Date Of Supply Of Blood Bags To The Institute31. Filled To Normal Capacity Shall Withstand An Acceleration Of 5000G For 30 Min At Temperature 4°C To 24°C Without Becoming Permanently Distorted And Should Withstand Temperature Up To -80°C Without Breakage.32. The Manufacturers Should Have Supplied Blood Bags Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years.Blood Bags * Blood Bags With Cpda1 - Single (350 Ml.)* , Blood Bags With Cpda1- Double (350 Ml.)* , Blood Bags With Cpda1- Double (450 Ml.)* , Blood Bags With Cpda1 - Triple (350 Ml.)* , Blood Bags With Cpda1 - Triple (450 Ml.)* , Triple Sagm Blood Bags (450 Ml.)* , Triple Sagm Blood Bags(350 Ml.)* , Transfer Blood Bags (300Ml.)* , Blood Bags (450 Ml.) With Pre Storage Leukocyte Reduction Filters * , Blood Administration Set With Filter* (25 Nos) , Rbc Leukocyte Reduction Filters (Lab Side With Transfer Bag)- 3Rd Generation* , Rbc Leukocyte Reduction Filters (Bed Side)- 3Rd Generation* , Platelet Leukocyte Reduction Filters (Lab Side With Transfer Bag)- 3Rd Generation* , Platelet Leukocyte Reduction Filters (Bed Side)- 3Rd Generation* , Paediatric Blood Bags With Cpda1 (100Ml)* , Blood Bag For Platelet Pooling By Buffy Coat Method With Leukoreduction Filter (4 To 6 Bags) , Platelet Additive Solution (500 Ml) , Penta Blood Bags With Cpda1* , Apheresis Kits For Plateletpheresis , Apheresis Kits For Therapuetic Plasma Exchange , Specifications For All Above Testing Kits From Item No: 204 To 2151. All The Above Mentioned Test Kits Should Be Duly Certified By Statutory Authorities Namely Drug Controller General Of India And Dghs For Use In Blood Banks 2. The Manufacturers Should Have Supplied Test Kits Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years.3. 4Th Generation Test Kits Mentioned Above Should Meet Standard Definitions, Parameters As Per Standard Text Books And Duly Certified As 4Th Generation Test Kits By Drug Controller Of India.Testing Kits*Hiv Elisa Test Kits* (96 Tests) , Hiv Elisa 4Th Generation Test Kits* (96 Tests) , Hiv Rapid Test Kits*(50 Tests) , Hcv Elisa Test Kits* (96 Tests) , Hcv Elisa 4Th Generation Test Kits* (96 Tests) , Hcv Rapid Test Kits*(50 Tests) , Hbsag Elisa Test Kits* (96 Tests) , Hbsag Elisa 4Th Generation Test Kits* (96 Tests) , Hbsag Rapid Test Kits Whole Blood/Serum*(50 Tests) , Syphilis Card Test*(100 Tests) -Tpha Method , Vdrl Rpr Test Kits*(100 Tests) , Card Test For Detection Of Pan Malaria (Pf & Pv) Specific Ldh Using Whole Blood * (25 Tests) , Specifications For Gel Card Centrifuge And Incubatorplacement Specificatons (From Item No 216 To 235)1. Thegel Card Centrifuge And Incubatorequipment Should Be Placed And Maintained Free Of Cost Against The Purchase Of Gel Cards Under Contract Agreement For One Year. 2. The Gel Card Centrifuge And Incubator Will Be Placed On The Condition That It Will Be Owned And Maintained By The Firm Entering Into The Contract For Supplying The Entire Immunohematology Items From 194 To 208 3. Equipment To Be Placed In The Premises Of Blood Bank At Jipmer Under A Guarantee For Free Maintenance For The Contract Period.4. Necessary Inspections And Calibration Certificates To Verify The Compliance Of The Placed Equipment For Immunohematology Workup5. Necessary Training Will Have Tobe Given To The Blood Bank Staff Members, If Needed, From Time To Time.6. Supplier Will Place Another Additional Equipment Of The Same Specification And Model Under The Same Terms And Conditions To Cater For Uninterrupted Trouble Free Services. 7. The Supplier Will Give An Undertaking That The Equipment Supplied Is Of The Latest Model And Version Available As On Date Of Entering Into The Contract. 8. The Supplier Should Ensure That Both The Equipments Are Functioning At All Times. In Case Of Failure Of Any One Of The Instruments The Downtime Should Not Be More Than 24 Hours. Only Under Extraordinary Circumstances The Downtime For The Equipment Can Be Increased By A Period, Which Should Not Exceed 72 Hours.9. Suppliers Should Quote For The All Above Items Mentioned Item No From 216 To 235. No Partial Quote Will Be Entertained. If Partial Quote, The Tender For The Above Items Will Be Summarily Rejected. 10. Authorized Distributor Certificate From The Original Manufacturer Should Be Provided.Immunology Kits ( Should Providesamples For Evaluation. Final Selection Will Be Based On The Results Of Such Evalaution. Any Demonstration Or Training Has To Be Provided Before Evaluation)*# Liss Diluent Ii (500 Ml) , Antibody Screening 3 Red Cell Panel-For Column Agglutination Technique (0.8%) , Antibody Screening 3 Red Cell Panel- For Conventional Tube Technique( 3-5% Cells) , Antibody Identification 11 Red Cell Panel For Column Agglutination Technique (0.8%) , Antibody Identification 11 Red Cell Panel- For Conventional Tube Technique( 3-5% Cells) , Antibody Identification 11 Red Cell Panel (Enzyme) For Column Agglutination Technique (0.8%) , Antibody Identitication Extendedred Cell Panel , Red Cell Preserving Solution For Serological Applications , Diluent-I, Modified Bromelin For Blood Grouping And Enzyme Tests (500 Ml) , Red Cell Elution Kits (10 Tests) , Coombs Gel Cardsfor Antibody Screening And Identification-(Igg+C3d)- 6 Tests Per Card , Coombs Gel Cards For Crossmatching(Igg+C3d)-6 Tests Per Card , Coombs Anti Igg Gel Cards-6 Tests Per Card , Abo/D+ Reverse Grouping Gel Cards (24 Tests) , Rh Subgroup +Cw+K Gel Cards (48 Profile) , Dc Screening Gel Cards (12 Profile)-Igg,Igm,Iga,C3d,Ctrl , Dat Igg-Dilution Gel Cards (12 Profile) , Dat Igg1/Igg3 Gel Cards (12 Profile) , Anti Igg1/Igg3/Igg2/Igg4 Dat Card , Nacl Gel Cards--6 Tests Per Card , For Reagents236-284 Igm Will Be Preferred Over Igg Rare Antiserasanti K Card-72Tests , Anti Jka Card-72Tests , Anti Jkb Card-72Tests , Anti Lea Card-72Tests , Anti Leb Card-72Tests , Anti Lua Card-72Tests , Anti Lub Card-72Tests , Anti M Card-72Tests , Anti N Card-72Tests , Anti S Card-72Tests , Anti S (Small) Card-72Tests , Anti Fya Card-72Tests , Anti Fyb Card-72Tests , Coombs Gel Cards For Direct And Indirect Antiglobulin Testing)-6 Tests Per Card , Check Cell , Panocell 16 , Panoscreen 3/4 , Gamma Elu Kit Ii , Gamma Ega Kit , Gamma Lectin System , Gamma Quin , Freeze Dried Papain , R.E.St. , W.A.R.M. , Gamma Peg , Anti-Ina , Anti Inb , Anti-Mia , Anti Mib , Anti K Igm (1-5Ml) , Anti C Igm (1-5Ml) , Anti C (Small C) Igm (1-5Ml) , Anti E Igm (1-5Ml) , Anti E (Small E) Igm (1-5Ml) , Anti K (Small K) Igm (1-5Ml) , Anti Fya(1-2Ml) , Anti Fyb(1-2Ml) , Anti Jka(1-2 Ml) , Anti Jkb (1-2 Ml) , Anti M (1-2 Ml) , Anti N (1-2Ml) , Anti S (1-2Ml) , Anti S (Small S) (1-2 Ml) , Anti Lea (1-2 Ml) , Anti Leb (1-2 Ml) , Anti Lua (1-2Ml) , Anti Lub (1-2Ml) , Anti P (1-2 Ml) , Anti I(1-2 Ml) , Blood Bags For Total Automated Blood Component Extraction* See Also Above As For Blood Bags Specificationsnote:1. Samples/Brochure Listing Product Details/Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender.2. In Case Of Non-Receipt Of Samples Within One Week After Display Of E-Tender, An E-Mail Remainder (Mentioned In Tender Form) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled.3. Selection Will Be Made After Evaluation Of Samples/Brochure, Certificatetop And Bottom Quadra And Penta Blood Bags For Totally Automated Component Extraction.*- 350Ml (For Specification Refer Tender Document) , Top And Bottom Quadra And Penta Blood Bags For Totally Automated Component Extraction.*- 450Ml (For Specification Refer Tender Document) , Molecular Typing Reagents Dna Blood Extraction Kit , Primer (500 Ml) , Ssp Kits For Abo Type , Ssp Kits For Rh Type , Ssp Kits For Abo Type- Variant , Ssp Kits For Rh-Partial D , Ssp Kits For Weak D , Ssp Kits For Kkd Type , Ssp Kits For Mns Type , Ssp Kits For Minor Blood Group Type , Ssp Kits For Hpatype , Ssp Kits For Hna Type , Tbe Buffer-1L , Ethidium Bromide , Ethanol-70% , Microtips- 20 To 200 Microlitre (1000 Nos) , Microtips -1Ml-500Ml , Agarose Powder , Bromophenol Blue , Acrylamide , Ammonium Persulphate , Sodium Dodecyl Sulphate-10% , Ammonium Chloride , Ammonium Bicarbonate , Protininase K , Boric Acid , Consumables For Chemiluminscence Systemnote: 1. Samples/Brochure Listing Product Details/Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender.2. In Case Of Non-Receipt Of Samples Within One Week After Display Of E-Tender, An E-Mail Remainder (Mentioned In Tender Form) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled. 3. Selection Will Be Made After Evaluation Of Samples/Brochure, Certificatetesting Kits For Fully Automated Immunoassay System – Chemiluminscence, Floor Model Hiv – Fourth Generation Kit With Fourth Generation Controls, Calibrators From Same Manufacturer. (Who P24ag Int Std90/636) < 0.90Iu/Ml) (100 Tests) (For Specification Refer Tender Document) , Hbsag - Capable Of Qualitative Detection Of Hepatitis B Surface Antigen (Hbsag) With Excellent Mutant Detection. (100 Tests) (For Specification Refer Tender Document) , Hcv - Capable Of Qualitative Detection Of Antibody To Hepatitis C Virus (Anti-Hcv). (100 Tests) (For Specification Refer Tender Document) , Syphilis - The Assay Should Be Able To Detect Treponema Pallidum Specific Antibodies Of Both Igm And Igg (100 Tests) (For Spec Please Refer Tender Document) , Equipments , Water Bath-Laboratory Rangespecifications:1. Dimensions (External) 40 Cm X 40 Cm X 20Hcm (Approx.) 2. Dimensions (Internal) 30 Cm X 30 Cm X 15Hcm (Approx.) 3. Double Wall Insulated Metal Body, 4. Temperature Range 37ºc -100ºc, 5. Digital Temperature Control And Display6. Temperature Precision 0.1ºc, 7. Should Have Provision To Maintain Uniformity Of Temperature8. Should Have The Provision To Incubate Racks Of All Size Of Test Tubes, 9. Illuminated On Switch, 10. Indicator Light Showing Heating Element Operation, 11. Temperature Control 12. Demonstration Of Performance Of Equipment Is Compulsory In Nearby Area Failing To Which Will Lead To Disqualification., 13. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision 14. Should Be Bis/Ce/Fda Approved Product, 15. Warranty-02 Yrs. , Blood Transportation Box Specification: 1. Extended Cold Life, 2. Fixed Two Temperatures Setting Adjustable To +4°C And +22°C. 3. Capacity To Accommodate Minimum 48 Blood Bags Of 450 Ml.C33, 4. External Dimension Of Each Transportation Box Should Be Within 1000 -1500Mm (L)X 800-1000 Mm (W)X 600- 700 Mm (H)5. Chest / Vertical Cabinet With Built In Handles And Hinged Door., 6. Body Material Should Be Polyethylene (Corrosion Free)7. Smooth Castors With Stabilizers For Flexibility And Movement., 8. Ambient Working Temperature -2°C To +43°C, 9. Main Power Switch.10. Microprocessor Based Temperature Controller With Integrated Audio Visual Temperature Alarm Function On Digital Monitoring Display. 11 .Separate Selector Switch For + 4°C And +22°C Temperature Settings., 12. Nominal Dc Power 12 / 24 Volt And Nominal Ac Power 100 – 240 Volt, 50/60Hz. 13. Automatic Ac / Dc Power Supply Selection., 14. Automatic Cooling / Heating Operation., 15. Air Cooled Hermetically Sealed Dc Compressor., 16. Vehicle Fixation Kit.17. Controlled Fan Cooling System For Constant Air/Temperature Distribution., 18. For Storage Of Blood Bags, Minimum Two (2) Wire Basket Should Be Provided In Each Box.19. Power Alarm Audio And Visual By Led. Audio Alarm Can Be Switched Off. Temperature Audio And Visual High And Low Alarm By Led.20 .Minimum Polyurethane Insulation Cfc Free For The Cabinet And The Door., 21. Warranty-02 Yrs. , Binocular Microscope (Without D.G) Specification: 1. Head:Binocular 30° Inclined And Rotatable 360° 2. Eyepieces:10X 20Mm Fov 3. Nosepiece:Reversed, Quadruple 4. Objectives:Plan Achromat 4X, 10X, 40X, 100X Oil5. Condenser:1.25 N.A. 6. Stage:Rackless Mechanical Stage 7. Focusing:Coaxial Coarse/Fine Focus System With Limit Stopper And Torque Adjustment 8.Focusing:Coaxial Focusing System With An Adjustable Tension Control And Upper Limit Stop To Prevent Accidental Damage To Slides; All Metal Gears, Brass Fine Focus Gear 9. Illumination:Led Illumination Variable With Cord Holder 10. Warranty: 5 Years , Table Top Centrifugespecification: 1. Speed Max : 100-6000 Rpm, Rcf: 5030Xg, 2. Automatic Rotor Identification.3. Heavy Duty Brushless Induction Motor For Low Vibration And Noise < 65 Db, 4. Presetting Of Speed And Time And 0-99 Minutes Digital Timer5. Safety Lid Interlock, 6. Digital Speed Indication, 7. Digital Indicator Cum Controller, 8. Dynamic Break And Imbalance Detector With Cutoff 9. Angle Head Rotor With 24 X (5-15Ml Tubes) With Appropriate Tube Adapters Should Achieve Rpm 4500 Or More & Rcf 3300 G Or More 10. Rust Proof Stainless Steel Inner Chamber, 11. To Work On 220 Volts Ac, 50 Cycles12. To Be Supplied With Suitable Servo Controlled Stabilizer, 13. Manufacturer Should Be Iso 13485 Certified., 14. Warranty - 2 Years , Rh View Boxspecification: 1. Built-In Temperature Indicator For Easy, Accurate Monitoring Of Viewing Area. Viewing Area Temperature Adjusts Easily To Compensate For Ambient 2. Temperature Changes. (Range: 45°C To 50°C) 3. Rh Slides Reaches Temperature Of 37°C To 39°C In Two Minutes, Eliminating Wasted Heat Up Time. 4. Soft, Fluorescent, Glare Free Light Provide Uniform Illumination Of Slide Contents. 5. View Box Can Be Gently Rocked Using Large Knob On Support Cradle. 6. Sturdly, Easy-To-Clean Metallic Powder Compact Case. Utilizes Minimal Bench Space. 7. Meets Rh Slide Test Standard Set By The Aabb., 8. Unit Conveniently Includes Three-Wire Cord And Plug. 9. Light - Fluorescent Glare Free, 10. Temp Display - 37°C ± 2°C11. Power - 220 V - 50Hz, 12. Warranty - 2 Years , Specific Gravity Meter Specification: 1. Should Read Specific Gravity From 1.000 To 1.140?2. Hydrometer Should Have A Solid Shot-Weighted Float And An Extra Long Stem For Grasping3. Jar Should Be 5 In. (13Cm) High With Extra Wide Base 4. Warranty - 2 Years , Digital Specific Gravity Meter Specification: 1. Should Read Specific Gravity From 1.000 To 1.100?2. Digital Display3. Warranty - 2 Years , Hot Air Oven - Laboratory Usespecification:Operational Requirementsmicroprocessor Based System With Pid-Temperature Controller With Integrated .Auto Diagnostic System With Fault Indicator.Technical Specifications1. External: Stainless Steel Casing :Insulated Stainless Steel Door With Locking And Rear Zincplated Steel 2.Interior - Internal Volume More Than 200 Liters Easy-To-Clean Interior, Made Of Stainless Steel,With Supports On The Three Sides For Three Adjustable Perforated Stainless Steel Shelves 3. Forced Air Circulation By Quiet Air Turbine/Fan To Ensure Uniform Temperature 4.Fitted With Load Indicator And Safety Thermostat Take Over Indicator Lamp. Lcd/Led Indicator5. Temperature Variation +/- 1 Deg C., 6. Temperature Range- Ambient To 250 Deg C., 7. Output Available For Data Acquisition. Environmental Factors: 1. The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 -50Deg C 2. The Unit Shall Be Capable Of Operating Continuously In Ambient Temperature Of 10 -40Deg C And Relative Humidity Of 15-90%3. Warranty - 2 Years , Agglutination Viewers For Blood Bank Specification: 1. Designed For Use In Blood Typing, Cross Matching, Antigen Typing, Titers And Other Agglutinations Tests 2. Illuminates Test Tube Contents Through The Use Of A 5-Watt Bulb From Above And A Magnifying Mirror From Below3. Easy To Use Side-Mounted On/Off Switch 4. Flexible Neck Allows For Easy Manipulation Of Light Source 5. Input: 120V 60 Hz, 18W; Output: 12Vac 500Ma6. Warranty: 2 Years , Cold Chain Boxes (4 Pack Vaccine Carriers) To Transport Blood To Wards (Blue - 150 Nos, Pink-150- Nos, Yellow - 100 Nos, White-100 Nos)Specification: 1. Storage Capacity: 1.63 Litres2. Lid Type And Fixings: Removable 3. External Surface Material: Hdpc4. Internal Lining Material: Hips5. Insulation Material: Cfc-Free Polyurrethane 6. Insulation Thickness: 35-38 Mm7. Number Of Ice Packs: 4 X 0.4 Litres 8. Cold Life Without Opening , Tested By Who Approved Laboratory: 4 Hours At 6°C 9. Warranty: 2 Years , Vdrl Shakerspecification: 1. Platform Size 12” X 12” For Keeping Reaction Trays.2. Timer With 0 To 30 Minutes For Control Of Shaking Duration With 1 Minute Interval.3. Should Have Built In Speed Regulator With Maximum Speed Of 150-180 Rpm. 4. Warranty: 2 Years , Plasma Thawing Bathspecification: 1.Unit Should Thaw Atleast 8 Plasma Units In Less Than 20 Minutes. 2.Digital Electronic Bench Top System With Led Display. 3.Should Have 2 Separate Basket Asemblies Securely Holding Plasma Bags4.Water Bath Based Operating System At A Preset And Precise Temperature Of 37°C ± 0.5°C5.Should Give An Alarm When The Plasma Bags Are Thawed. 6. Provision For Programmable Time Setting For Length Of Thawing With Audio Completion Signal.7. Should Have Audio Visual Over-Temperature Alarm System8. Should Have A System To Drain The Chamber. 9. Should Have A Deep Thawing Chamber With A Stirrer10. Warranty: 2 Years , Blood Bag Digital Weighing Balance - Double Pan Specification: 1. Should Be An Electronic Differential Scale. 2. Weight Measurement - 0-2500 Grams (Range) 3. For Weighing 2 Blood Bags Simultaneously For Balancing For Centrifugation Purposes & Should Display The Difference Of Two Loads.4. Maximum Weight Difference - 2500 Grams, 5. Weight Sensors - Load Cells 6. Weight Display Panel - 4-Digit Led Display, 7. Weight Calibration Tolerance - +/-1 Gram 8. Decimal Truncation Error - 1 Gram, 9. Total Accuracy Of Display - +/-2 Grams 10. Weight Accuracy - 4 Grams, 11. 18V Dc (A/C Power Adapter 100-120/220-240 V A/C In) 12. Power Consumption - 5 Watts, 13. Warranty - 2 Years , Blood Bag Digital Weighing Balance - Single Panspecification: 1. Should Have A Microprocessor Based Single Pan Analytical Balance With High Accurary And Precision Is Required 2. Should Have Weigh Accuracy Of Upto Iii Decimal Place, 3. Should Have A Auto-Self Calibration Facility4. Should Have A Auto Zero Setting., 5. Shoud Have One Touch Calibrationj.6. Should Have Weighing Capacity Upto 500 Gm, 7. Should Have A Readability And Repeatability 0.001/G 8. Should Have Stabilization Time <5 Secs., 9. Should Have Lcd Display For Showing Weight. 10. Power Input To Be 220 V To 240 V. Ac, 50 Hz 11. Should Provide With Suitable Ups With Maintenance Free Batteries For Minimum One Hour Back Up, 12. Warranty: 2 Years , Hemocue Testing Systemspecification: 1. Should Be Able To Measure The Hb Using Blood From Finger Prick (Should Be Based On Azide Methohemoglobin Method).2. Should Be Capable Of Displaying Results Within 1 Minute, 3. Accuracy ± 1 %4. Disposable Cuvettes. Cost Of Consumables To Be Quoted Along With This Tender As It Will Be Considered For Financial Comparison., 5. Should Be Portable And Should Have The Battery Backup For 8 Hours Or More With Provision Of Electric Operations .6. Factory Calibrated And Calibration Should Be Verified Automatically Time When The Instrument Is Turned On., 7. Should Have The Memory To Store At Least 500 Results With Date And Time And Should Be Able To Transfer The Results To Pc.8. Should Be Us Fda Or European Ce Class-2A Or Bis, 9. Should Be Iso 13485 Approved Product., 10. Original Literature Of Equipment Should Be Submitted., 11. Warranty: 2 Years , Table Top Incubatorspecification: 1. The Incubator Should Be Suitable For Incubation Of Elisa Plates Of Tti Markers, 2. Dimensions Should Be Approximately 355 X 355 X 355 Mm3. Should Be Sturdy, Double Walled Construction With Complete Inner Chamber Made Of Anodized Aluminum Or Highly Polished Stainless Steel. 4. Gap Between The Walls Should Be Filled With Special Grade Insulation Material For Proper Insulation And To Avoid Heat Losses. 5. Should Have Inner Chamber Fabricated With Ribs For Adjusting Shelves To Convenient Height., 6. Should Be Supplied With 2 Or 3 Removable Shelves. 7. Heating Element Should Be Placed At The Bottom And Side Ribs For Uniform Temperature All Over The Space.8. Should Have The Temperature Control By Thermostat From 20ºc Above Ambient To 50ºc ±0.5ºc. Temperature Control Knob Should Be Graduated In Degrees Centigrade. 9. Should Be Provided With Air Ventilators Port On Sides At Top For Ventilate Fumes & To Assist Convection Process. 10. The Equipment Should Be Provided With A Panel Having A Thermostat Control Knob, On/Off Switch And Indicator Light. 11. Firm Should Also Provide The Relevant Temperature Calibration Certificate For The Equipment From Any Nabl Accredited Lab., 17. Warranty: 2 Years , Domestic Refrigerator Specification: 1. Capacity: 300 Ltrs ( Double Door)2. Material: Stainlees Steel Puf3. Interior Light4. Reversible Door Opening 5. Condensation Drain 6. Voltage: 220 V 7. Warranty: 2 Years , Bp Apparatus Self Check Dial Arm Type Sphygmomanometerspecification: 1. Should Be Aneroid Type, 2. Should Have Isi Mark., 3. Should Have A Measuring Range From 0 To 300 Mmhg 4. Should Be Provided With Adult Arm Cuffs Of Size Medium & Large And Paediatric Cuff. 5. The Dial Mano Meter Markings And Graduations Should Be Permanent And Clearly Visible And Filled With Pigments, With Diameter Of Minimum Diameter Of 160 Mm 6. Body & Bazel – Aluminium Die Casted (Powder Coated), Screw Type Bazel, 7. Sensing-Corrogated Phosphorous Bronze Twin Capsule Bellows., 8. Movement Mechanism – Brass, 9. Connection : Brass, Nickel Plated For 3-4 Mm Rubber Hose 10. Dial – Aluminium, 11. Pointer – White Coated, Thin & Sharp Made Of Phosphorous Bronze, 12. Window Lenses – Clear Plastic. 13. All Plastic Parts, If Any Used Should Not Crack, Flake, Peel Or Disintegrate In Normal Use., 14. The Inflating Rubber Bag Should Be Capable Of Withstanding An Internal Pressure Of 450 Mmhg Without Leaking.15. The Inflating Bulb Should Be Soft And Should Not Have Any Joints Or Ridges., 16. The Fastening Arrangements Of The Cuff Should Be Of Hook And Loop Type (Velcro) 17. The Threading And Fastening Arrangement Of The Cuff Should Show No Sign Of Slip Or Failure When Subjected To The Maximum Test Conditions.18. The Rubber Tubes Used Should Have An Internal Diameter Of 3 ± 0.5Mm And The External Diameter Should Not Be Less Than 8Mm., 19. The Tubes Should Be Fitted With Male And Female Leur Connectors.20 .Should Provide A Carry Bag To Keep The Whole System Safe And Sound. All Parts Should Be Replaceable In Case Of Breakage., 21. Warranty: 2 Years , Insecticutors Description: Insecticutors Are Required In Bleeding Area, Donors Screening Area, Issue Section For Controlling Flies And Other Insects Which May Contaminate Blood Components. Specification: 1. Powder Coated Body For Long Lasting & Durability2. Phillips Uv Tubes 3. Copper Wiring And Copper Choke For Electricity Saving4. Rugged 3 Kv Transformer 5. Zinc Coated Grid To Prevent Rusting 6. Collection Tray For Killed Flies7. Pvc Coated Guard To Avoid Shock8. Low Power Consumption 9. Warranty: 2 Years , Hot And Cold Water Dispenser For Drinking Purposedescription: Provides Safe Drinking Water For Blood Donors 1) Provides Cool Drinking Water At Blood Donation Camps 2) Decreases Chances Of Vasovagal Blood Donor Reactions. 3) Positively Enhances Donor Reaction Affecting Donor Retention. Specification: 1. Quiet Operation, Runs On Electricity And Easy To Clean., 2. Anti Corrosive And No Costly Maintenance3. Plain / Hot / Cold Water Option Available, 4. Compact Design Taking Very Less Space.5. Long Lasting Plastic Front Panel And Faucets, 6. Convenient Removable Drip Tray 7. Led’S To Indicate Primary Function, 8. Low Power Consumption 9. Bimetal Sensors To Ensure Overheating Protection, 10. Weight Less Than 20 Kg, Compact And Mobile 11. Spill Proof Bottle Holder - Optional, 12. Warranty: 2 Years , Vein Illumination Device Description:It Is Used To Visualize Subcutaneous Veins By The Phlebotomist. Useful For A) Prevent Deferrals Because Of Poor Venous Access B) Preventing Loss Of Unit Because Of Inefficient / Insufficient Collection C) Useful For Training Phlebotomist And Building Their Confidence D) Enhances Donor Experience E) Decreases Chances Of Apheresis Procedure Failure F) Non Contact Venous Assessment For Phlebotomyspecification: 1. Based On Infra Red Technology, 2. Clearly Displays Subcutaneous Vasculature Without Any Contact With Skin3. No Need For Calibration Or Adjustments, 4. Includes Charging Cradle And Power Supply Cord 5. Run Time Of At Least Two Hours Per Charge, 6. More Than 300 Vasculature Visualizations Per Charge7. Accessories Available Like: 1) Stand For Hands Free Operation With And Without Charger 2) Clamps For Fixing For Hands Free Operation 3) Mobile Hands Free Operation 6) Padded Carry Case With Shoulder Sling 4) Belt Carry Case., 8. Warranty: 2 Years , Microplate Shaker Specification:1. Platform Size 12” X 12” For Keeping Reaction Trays.2. 4 Number Of Microplates Can Be Kept At A Time3. Timer With 0 To 30 Minutes For Control Of Shaking Duration With 1 Minute Interval.4. Should Have Built In Speed Regulator With Maximum Speed Of 150-180 Rpm. 5. Warranty: 2 Years , Vacuum Cleaner (Hand Held) Specification:1. Special Features: 2 Tier Radial Cyclones, Direct-Drive Motor, Washable Pre-Motor Filter 2. Cleaning Method: Dry 3. Cleaner Type: Handheld 4. Included Tools: Combination Nozzle, Extension Hose, Futon Tool, Gap Nozzle, Mini Motorized Tool 5. Warranty: 2 Years , Phlebotomy Mannequinspecification:1. Advanced Venipuncture And Injection Arm - White Which Gives Complete Venous Access For Phlebotomy As Well As Iv Therapy, Plus Sites For Intra-Dermal And Intramuscular Injections.2. Injectable Metacarpal, 3. Digital And Thumb Veins4. Median Cephalic, 5. Median Basilic 6. Median Cubital Veins, 7. Basilic 8. Cephalic, 9. Accessory Cephalic10. Median Antibacterial Veins, 11. Deltoid Muscle, 12 .Warranty: 1 Year , Microplate Centrifuge Specification:1. Speed: 300-3000 Rpm With Increment Of 10 Rpm, 2. Max Rcf: 2000 X G Or More, 3. Automatic Rotor Recognition And Imbalance Detection. 4. Manufacturer Should Provide Compatible Set Of Microplates With Specifications Of The Same., 5. Timer: 0 To 60 Mins. Continuous Operation 6. Drive System: Brush Less Induction Drive, 7. Noise Level At Max Speed Should Be Less Than 60Db 8. System Should Have Safety Features Like Lid Lock And Interlock9. System Should Have Microprocessor Controlled Pre-Selection And Display Of Speed And Time.10. Manufacturer Should Be Iso 13485 Certified., 11. The Centrifuge Should Be Provided With The Following Accessories 12. Speed: 300-4000 Rpm Or More, 13. Rcf: 2000X G Or More 14. Capacity: Should Be Able To Centrifuge 2 Microplate Of 96 Wells 15. Rotor Head Should Be Available With The Firm For Immediate Replacement, 16. Warranty: 2 Years , Cryoprecipitatebath Specification:The Cryo Bath Is Designed For Rapid And Uniform Thawing Of Fresh Frozen Plasma Bags At 4 ºc +/- 0.2 ºc Such That The Cryoprecipitate Remains Solid, And A Cryosupernatant Liquid Is Formed That Can Be Transferred Out Of The Bag In Order To Manufacture Cryoprecipitate Units.Ii Operational Requirements: 1. Floor Standing System, Mounted On Lockable Castors. 2. Should Be Having Capacity Of 12-18 Bags Per Run For One Cycle. 3. Should Be Able To Thaw Ten To Twelve Plasma Units (Ffp ~200-300 Ml) At A Time. 4. Should Have Stainless Steel Tank Of 22G, And An Insulated Lid Covered With 20G Stainless Steel, 5. Should Be Fitted With Compartments That Have Removable Rack/Tray System For Securely Holding The Plasma Bags And Ensuring That Entry Ports Are Not Contaminated With Water.6. Should Be A Microprocessor Controlled Water Bath Based System Operating At A Temperature At 4 ºc +/- 0.2 ºc Or Alternative Can Also Be Safely Set At 37 ºc +/- 0.2 ºc.7. Digital, Electronic System With Provision For Programmable Temperature Adjustment Setting With Led Display With Temperature Resolution Of 0.1 ºc, 8. Should Not Take More Than 2 Hours At Full Loads To Thaw The Plasma Into Cryosupernatant. 9. Should Have A Deep Thawing Chamber With A Stirrer For Water Circulation & Gentle Rocking For Uniform Heating By High Capacity Pump, 10. Should Have A System To Drain The Chamber Without Lifting Or Tilting, And Should Be Fitted With A Shut Off Valve.11. The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 -50Deg C And Relative Humidity Of 15-90% Without Getting Rusted. 12. Compatible With Input Voltage: 240V 50 Hz Single Phase Ac14. Should Have An Integrated Voltage Stabilizer Or External Servo Stabilizer Of Appropriate Ratings Meeting Isi Specifications (Input 160-260 V And Output 220-240 V And 50 Hz). 15. Resettable Overcurrent Breaker Shall Be Fitted For Protection, 16. Warranty: 2 Years , Blood Collection Monitorspecification:1. The System Is Used To Collect Donated Blood From The Donor At The Same Time Mixing The Blood For Quality Collection Of Blood.2. Pre-Selection Of Volume To Be Collected. Tarring Of Bag Volume Before Collection. Tarring Range: 0 – 600 G. Automatic Storage And Recall Of Set Volume. Measure Volume With Best Accuracy 3. Led Indication On Commencement Of Collection., 4. Led Indication And Audible Alarm At The End Of Collection., 5. Indication Of Time Taken For Collection.6. Indication Of Blood Flow With Audio Alarm When Blood Flow Is Higher Or Lower Than Desired. Continuous Display Of Collected Volume, Flow And Time During Collection7. Automatic Clamping At Termination Of Preset Volume Collection, 8. Automatic Release Of Bag When Lifted., 9. Continuous Agitation Of Blood Bags During Collection: 12 – 16 Rpm., 10. Easy Provision To Change Preset Volume. 11. Should Operate On Mains As Well As Rechargeable Battery. On Battery It Should Operate For A Minimum Of 5-8 Hours., 12. Should Be Less Than 5 Kg 13. “ Pause Facility” To Pause The Collection. 14. Optional- Memory To Store Donation Data Such As Donor Number, Name Of Operator, Volume Collected, 15. Should Measure Volume With Accuracy Less Than 1 %16. The Unit Shall Be Capable Of Operating Continuously In Ambient Temperature Of 10 - 400 C And Relative Humidity Of 15-90%, 17. Power Input To Be 220-240V Ac, 50Hz As Appropriate Fitted With Indian Plug18. Should Be Technologically Advanced With Modern Blood Collection Scale And Mixer. It Should Be Light Weight & Portable., 19. Warranty: 2 Years , Gelcard Incubator Specification:1. Dedicated To Centrifuge Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”.2. Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 3. Incubator Should Have The Capacity To Incubate The Gel Card And Test Tubes For 37° 4. Automatic Balance Control 5. Warranty: 2 Years , Gelcard Centrifugespecification:1. Dedicated To Centrifuge Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 2. Centrifuge Should Have Option To Run Gel Card And Test Tubes, 3. Silent Centrifuge For Holding 24 Cards. Each Card With 6 Micro Wells 4. Automatic Balance Control, 5. Centrifugation Time: 10 Minutes Or Less 6. Speed, Time And Functions Are Digital Display, 7. Typing System Cards With ‘V” Shaped Bottom For Clarity In Results. 8. Monitored By Microprocessor., 9. Suitable Rpm.10. Gel Cards Should Be Made Available For Abo& Rh Grouping, Rare Blood Group Antigens, Coombs Test, Pnh, Partial D Typing And Etc., 11. The Price Of The Card Should Be Frozen For A Minimum Period Of Three Years12. 110V-240V/50Hz- 120Hz., 13. Bis/Ec Conformity.11. The Price Of The Card Should Be Frozen For A Minimum Period Of Three Years14. Enough Diluents And Abo Grouping Cards For 100 Tests And Coomb’S Card For 400 Tests With Adequate Diluents., 15. Warranty: 2 Years , Colorimeter- For Hemoglobin Estimation By Drabkins Method Specification:1. It Should Be Portable & Work On 220V & 5 Amp.2.It Should Have Built In Minimum Of 3 Filters With 500, 540 And 600Nm 3. It Should Come With Minimum Of 5 Cuvettes4. Display Should Be Digital5. It Should Be Easily Calibrated 6. Warranty-2 Years , Digital Ph Meter With 3 Standard Buffersspecification: 1. Should Have Working Range From 0 To 14., 2. Should Have Resolution 0.1/0.01 Ph 3. Should Have Temperature Compensation Zero To 100 Degree C With Atc4. Should Have Rs.232C Output And Supply Data Connector Cable5. Should Have Automatic Calibration Facility., 6. Should Have 3 Stage Calibration.7. Should Have Digital Display With 0.001 Ph Unit Readability, 8. Should Supply Tri-Combination Ph/Atc Electrode 9. Should Supply Electrode + Standard Buffer Solution (Ph 4.0, 7.0, 10.01 X 50Ml For Each Bottle) + Standard Electrode Holder +Ac /Dc Adaptor. 10. Should Be Provided With An Electrode Holder/Arm With Smooth Movement, 11. Warranty - 1 Year , Blood Bag Multifunction Hand Striper, Sealer And Cutterspecification: 1. The Body Should Be Made Of Pure Stainless Steel 2.The Handles Should Be Covered With Plastisol 3. Weight Should Be Less Than 200 Gms. 4. Should Be Certified By Ce And Iso 9001 5. Easy To Handle, Strip, Mix, Seal And Cut During Non Use 6. Warranty: 2 Years , Induction Stove Description: Required To Boil Milk And Water For Donor Refreshment Specification: 1. Single Stove, 2. Heating With Warming Facility3. Child Lock, 4. Capable Of Cooking Under Fan/In Ac 5. Protection From Over Heating, 6. Surface Safe To Touch During Operation 7. Protection From Spilling Of Food Items, 8. Programmable For Time And Temperature 9. One Touch Fixed Program And Fixed Timer Facility, 10. Digital Display11. Auto Menu, 12. Utensil Detection, 13. Power Saving 14. Bis/Ce/Iso Certified, 15. Warranty - 2 Years , Sonicator - Ultrasoundcleaning Bath Specification: 1. Fitted With Microprocessor Based Digital Temperature Indicator-Cum-Controller At Any Temperature From Ambient +5ºc To 60ºc.2. Should Have A Digital Timer With Settable Range From 0-15 Min Or 0-30 Min (Depending Upon The Capacity Ordered). 3. Extensively Protected Electronic Circuits Means Longer And Safer Operations., 4. High Frequency Electrical Energy Is Converted Into Ultrasound Waves By Means Of Ultrsonic Transducers. 5. Compact, Rugged And Highly Durable System., 6. Efficiency Of 90% Permits Maximum Cleaning Action, Low Power Consumption.7. Extensively Protected Electronic Circuits Means Longer And Safer Operations., 8. Automatic Frequency Tuning For Maximum Output. 9. Input Range Of 170Vac-270Vac, Highest Immunity To Input Supply Variations.10. Pre-Set Auto Degassing Function., 11. Pulse Sweep Power For Better Effective Cleaning.12. To Work On 220/230 V Ac Supply., 13. Warranty: 2 Years , Spectrophotometerspecification: 1. Wave Length Range: 190 To 1100 Nm 2.Spectral Band Width: 1 Nm3. Wave Length Display: 0.1 Nm Increments 4. Wave Length Accuracy: ± 0.1 Nm 5. Photometric System: Double Beam6. Photometric Accuracy: ± 0.002 Abs 7. Baseline Statbility: Less Than 0.0003 Abs8. Noise Level: Within 0.00005 Abs Rms Value (At 700Nm) 9. Warranty: 2 Years , Plasma Expressormanual Specification: 1. Should Be Suitable To Manually Express Blood Components (Plasma, Platelets) From Collection Blood Bags. 2. Front Panel Should Be Spring Loaded To Apply Uniform Pressure On Container Causing Transfer Of Fluid. 3. Compression Plate Should Be Made Of Durable Transparent Acrylic4. Metal Used For The Apparatus Should Be Non-Corrosive And Can Be Cleaned With Antiseptics 5. Base Portion And Vertical Surface Should Be Made To Have Better Strength And Longlasting Performance 6. Quality Certification: Iso 13485 Certified7. User?S List Should Be Attached With Satisfactory Report For The Last Three Years From Three Users With Contact Details. 8. Demonstration Of Performance Of Equipment Is Compulsory In Nearby Area Failing To Which Will Be Disqualification.9. Warranty - 1 Year , Dry Block Incubator Specification: 1. Basic Device Without Exchangeable Thermoblocks. 2. 16 Tube Holders- Test Tube Size 12 X 75Mm And 12 X 100Mm3. Temperature Control Range:-50C To 99 º C. 4. Accuracy Of Temperature Control : At 0º C ± 1.0ºc 5. At 37º C± 0.5ºc And At 90º C± 1.0ºc, 6. Heating-Up Speed: Approx. 5º C / Min 7. Range Of Time Phases 0:01To 99.59 Hrs, 8. Power Supply: 100 - 240 V, 50 - 60 Hz, 9. Precise Temperature Control10. The Temperature And Run Time Can Be Programmed Individually Upto 4 Temperature Levels And 4 Time Phase In Succession, 11. Warranty - 2 Years , Vertical Reagent Refrigeratorspecification: 1. Storage Capacity: Should Be At Least 300 Liters Capacity, 2. Set Temperature 4ºc With Temperature Range 2ºc To 6ºc And Adjustable With Setting Accuracy Of ±0.5ºc3. Refrigeration: Non- Cfc Cooled Refrigeration, 4. Should Have Good Insulation To Maintain Required Temperature5. Should Have Good Metallic Door With Removable Shelves Inside For Easy Cleaning.6. Microprocessor Based Temperature Controller With Integrated Audiovisual Temperature And Power Alarm Function With Digital Monitoring Display.7. Safety Features: Audio Alarm For All The Following Parameters Should Be There: Temperature Fluctuation & Power Failure, Set Point Alarm, Low Alarm Point, Door Opening Audio And Visual Display Alarm. 8. Safety Thermostat To Avoid Negative Temperatures., 9. Should Have Battery Back Up For Temperature Display And Power Alarm., 10. Interval Temperature Hold Over Time In Case Of Power Failure Should Be At Least 1.5 Hours. 11. Should Have Castor Wheels With Locking Facility, 12. Original Literature Of Equipment Should Be Submitted., 13. Manufacturer Should Be Iso 13485 Certified. 14. Firm Should Supply The Relevant Calibration Certificate For The Equipment From Nabl Accredited Lab., 15. User?S List Should Be Provided With Satisfactory Report For The Last Years From Three Licensed Blood Banks With Contact Details.16.Firm Will Have To Supply The Stabilizer If Required Along With The Equipment Free Of Cost., 17. Bidder Have To Arrange Demonstration Of The Quoted Model (If Required)18. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision, 19. Should Provide Datalogger Or Circular Chart Recorder, 20. Warranty: 2 Years , Blood Bag Tube Sealer (Table Top)Specification: 1.Blood Bag Tube Sealer Is A Compact Equipment To Seal The Blood Bag Pilot Tube By Radio Frequency Sealing System, 2. Should Be Capable Of 750 Seals Per Hour Or 1500 Sealing Per Charge Battery. Capable Of Sealing Tubes Of Various Manufacturers Of Blood Bag.3. Should Be For Table Top Use., 4. The Sealing Time Should Be Adjustable Between 0.5-5 Seconds, 5. Sealing Triggering Should Be Automatic 6. Should Detect Wet Tubes, Leakage Or Any Sealing Defect., 7. Should Have Indication Lamps For “Sealing Process” On Handle As Well As Main Unit And Led To Show The Battery Test., 8. No Warm-Up Time Should Be Required.9. Should Ensure Easy Separation Of Tube Segments After The Sealing. Should Have Separable Rupture Line., 10. System Should Run On Both Mains And Battery (More Than 10Hrs. Back Up When Fully Charged).11. Should Be Light Weight Less Than 3 Kg With Carry Bag., 12. Tube Thickness Of Up To 6 Mm Of Diameter And Wall Thickness Up To 0.75 Mm Can Besensed And Sealed Automatically.13. Should Be Able To Making Wide Seal Of 2Mm Thickness., 14. Indication Of Seal In Progress Should Be There., 15. Sealing Time Should Be Less Than 2 Sec., 16. Separable Rupture Line To Separate Tube After Sealing.17. Should Ensure Safety Against Electrical Shock Hazards, Fire Hazards, And Mechanical Hazards. 18. There Should Be No Hemolysis Of Blood In The Tube Segments, 19. No Warm-Up Time Should Be Required, 20. Should Be Able To Withstand Voltage Fluctuation, 21. It Should Be Easy To Clean. 22. Should Be Easy To Handle With The Grip To Hold The Sealers, 23. Splashguard To Protect User From Any Kind Of Blood Splash During Operation., 24. Manufacturer Should Be Iso 13485 Certified. 25. Weight Of Equipment Should Not Exceed 7 Kg., 26. Original Literature Of Equipment Should Be Submitted., 27. Firm Will Have To Supply The Suitable Stabilizer With The Equipment If It Is Essential For The Performance Of The Equipment., 28. Warranty: 2 Years , Electronic Analytical Balancespecification: 1. Electronic Balance With Transparent Case., 2. Digital Display Of Weight And Other Parameters Should Be Available. 3. Readability 1 Mg, 4. Capacity 1 Mg – 2000G, 5. Accuracy ±1 Mg 6. Stabilization Time Less Than 10 Sec, 7. Should Have Facility For Automatic Calibration With Tare Option.8. Original Literature Should Be Attached, 9. User?S List Should Be Attached With Satisfactory Report For The Last Three Years From Three Users With Contact Details.10. Firm Should Supply The Relevant Calibration Certificate For The Equipment From Nabl Accredited Lab., 11. Firm Will Have To Supply The Stabilizer If Required Along With The Equipment Free Of Cost12. Original Literature Of Equipment Should Be Submitted., 13.Firm Should Also Provide The Relevant Temperature Calibration Certificate For The Equipment From Any Nabl Accredited Lab. 14.User?S List Should Be Attached With Satisfactory Report For The Last Three Years From Three Users With Contact Details., 15. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision. 16. Manufacturer Should Be Iso 13485 Certified., 17. Warranty 2 Yrs , Non-Invasive Hemoglobulin Meter Specification: 1. Hemoglobin ° Measurement Range: 7-17 G/Dl ° Precision (1 Sd): 1 G/Dlresolution: 0.1 G/Dl 2. Data Logger With Real Time And Date3. Measured Values Automatically Stored4. Multilingual Data Interface5. Warranty - 2 Yrs , Refrigerated Centrifuge Specification: For Nucleic Acid Or Protein Lysate Preparation And Pcr Reaction 1. Maximum Speed: 20,000 Rpm Or More., 2. Speed Control Accuracy: ± 10 Rpm. 3. Maximum Rcf: 80,000 G (Approx.), 4. Maximum Capacity:20Ml 5. Tube Volume Range: 1.5 Ml – 20Ml, 6. Set Temperature: 0 To 40°C 7. Ambient Temperature 10 To 35°C, 8. Cooling System: Cfc & Hcfc Free 9. Acceleration / Deceleration Profile: 10/10 Or More, 10. Programmability: 20 Or More With Step Run Facility, 11. Power: 210-240 Vac, 50 Hz, 30 A. 12. Machine Should Have Features Like Eye-Balancing Of Samples, Delayed Start/ Stop, Dual Display Of =Run‘ & =Set‘ Parameters, Data Entry Through Key Pad & Touch Pad, Rpm/Rcf Mode, Rotor Life Management Etc.13. Machine Should Accept Rotors Of Other Makes., 14. Should Be Fda Or Ce Or Bis Approved Product, 15. Warranty - 2 Yrs , Donor Couch Specification: 1. Based On Haemodynamic Principles To Allow Blood Volumes To Redistribute With Cushioned Surface For Donor Comfort., 2. Armrest Suitable For Phlebotomy And Better Blood Flow. 3. Automatic Adjustment Of Arm- Rest To Adjust Length More Than 50 Cm And Width Of 15 Cm To Set The Arm Position To The Donor?S Comfort With Adjustment Of Height Mandatory For The Equipment.4. Material Should Be Waterproof With Rounded Borders And Easy To Clean., 5. The Length Of The Couch Should Be 200 Cm To 215 Cm To Accommodate All Type Of Donors.6. Specially Designed For Comfort Of Donor And Phlebotomist, 7. Should Be Able To Accommodate Donor Weight Capacity Of 150Kg Or More., 8. Electronic Remote Adjustment For Height And Comfortable Sitting Position. 9. Provision To Shift The Donor?S Position From “Head High – Foot Low” To “Foot High- Head Low” Or Any Position In Between For Optimal Blood Collection., 10. Only One Button To Reach Shock Position: Head Low In Case Donor Reaction., 11. 2/3 Motors With Separate Control Through Remote For Positioning Of Couch., 12. Electric Motor Should Have Microprocessor Controlled Limit Switch And Safety Circuit. 16. Trolley (Ss 304, Having Atleast Two Shelves With Adjustable Height, Suitable Size) Should Be Provided With Each Couch For Keeping Blood Collection Monitor And Other Consumables., 17. Good Quality Couch Covers (Two Sets) To Be Provided Along With The Couches Including Handles., 18. Original Literature Of Equipment Should Be Submitted. 19. User?S List Should Be Attached With Satisfactory Report For The Last There Years From Three Users With Contact Details., 20. Bidder Have To Arrange Demonstration Of The Quoted Model (If Required) 21. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision., 22. Manufacturer Should Be Iso 13485 Certified., 23. Should Be Supply With Suitable Stabilizer With Bis/Ce Mark. Accessories:- 24. Dust Cover -1, 25. Power Cable-1, 26. Additional Arm Rest (Pair)-01 Pair., 27. Remote Control-1 No, 28. Warranty - 2 Yrs , Automated Tube Stripperspecification: Motorized Metallic Roller & One Free Roller For Smooth Tube Strippingdesigned For Easy Manual Operation With Convenienceeasy To Use Hand Rollerportable Battery Pack, Backup 1000 Cyclesautomatically Strips Tube Once The Metallic Handle Is Pressed Uniform Radial Force Across The Tube-Prevents Abrupt Manual Pressureaudio Vishual Alarm For Over Load Protectionguiding Groove For Correct Tubing Position, Fed Through Rollerssuitable For All Commercially Available Blood Bags3. Warranty - 2 Yrs , Votex Mixer Specification: 1. Adjustable To 100 To 2500Rpm 2. Continuous And Intermittent Touch Control Modes 3. Heavy Cast Metal Base And Suction Cup To Assure Stability Prevent Walking 4. 220-230 Volts Ac, 50 Hz 5. Digital Display:Led6. Capacity Of 2-3 Kg And Orbit Of 35 Mm 7. Ce/Bis Approved8. Warranty - 2 Yrs , Magnetic Strirrer And Barspecification: 1. Digital Temperature Control With Max. Temperature At 380°C.2. Digital Speed Control With Max. Speed Up To 1500Rpm.3. High Resolution Lcd Displays For Actual Temperature And Speed.4. Brushless Dc Motorandmaintenance Free.5. Ceramic Plate For Chemical Resistance And Easy Clean. 6. Aluminium Cover With Ceramic Work Plate7. Hot Warning Sign If Temperature Is Above 50°C.8. Max. Stirring Quantity Of H2o At 5L. 9. External Temperature Control Is Available As Temperature Sensor Pt1000. 10. Warranty - 2 Yrs , Autoclave Specification: 1. Capacity 80-100L, 2. Sterilization Temperature 105-135 Deg C. 3. Pressure Gauge 1 To 1.5 Kg/Sq.Cm., 4. Safety Valve Releasing Pressure200kpa.5. Automatic Adjustable Working Pressure System., 6. Double Walled.7. Inside Boiler Made Of Stainless Steel & Outside Mild Steel Finished In Cream Enamel., 8. Radial Locking System Lid.9. The Panel Is Provided With On/Off Switch, Pressure Gauge, Steam Release Valve & Indicators To Show The Working Of Mains & Pressure Control System.10. Electrically Operated On 220V A/C With Stainless Steel Basket.11. Digital Temperature Controller With Inbuilt Timer That Will Cut Off The Heaters Automatically Afterlapse Of Pre Set Time At The Pre Set Temperature. 12. Microprocessor Based Pid Controller., 13. Height:600Mm. 14. Diameter Inside: 450Mm(24”X18”), 15. Manufacturer Should Be Iso 13485 Certified., 16. Warranty - 2 Yrs , Plasma Hemoglobinometer 1. Modified Azidemethemoglobin Method 2. Warranty - 2 Yrs , Millipore Waterplant1. Warranty - 2 Yrs , Microwave Oven1. Warranty - 2 Yrs , Thermal Temperature Monitor1. Infrared Thermometer2. Rechargeable3. Warranty - 2 Yrs
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 33
Puducherry View Result →
31.
Agriculture #9411218 Technical Bid
Tender For Sitc Of 58.5 Kva Dg Set Along With Amf Panel (As Per Cpcb Norms) Including Providing Earthing, Foundation At Fsd Sakti; 1 Providing, Installation, Testing and Commissioning of Silent Type Diesel Generating set which is factory assembled, factory tested diesel engine alternator set with acoustic enclosure, conforming to the latest CPCB Norms as and when amended, capable of delivering not less than 58.5 KVA, 415 volts at 1500 RPM, minimum 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load factor at typical site conditions (i.e FSD Sakti) including all accessories like common base frame, AVR (with max +/-1% limit), starting batteries of low maintenance type suitable for cranking duty and capacity not less than 120 AH for 12V/24V DC system (or OEM manufacturer recommendation AH in case the battery is same make as that of engine and supplied by the engine manufacturer only) with leads and terminals, including battery charging dynamo,12V/24V DC Starting system comprising of starter motor, Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor, in built min.120 Ltr fuel tank fabricated out of 3mm thick M.S sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class C pipes of suitable dia. completed with valves, level indications & accessories as required.All required cabling, interconnection like extension of control cables from AMF to DG set shall be provided by the Contractor to support the above controls.Approval/clearance of the complete installation shall be obtained by the contractor from CPCB/State Pollution Control Board/Local Bodies/Central Electricity Authority (CEA)/ other licensing authorities wherever required. 2 ENGINE- Diesel engine 4 stroke liquid cooled, electric start continuous rated engine of suitable BHP at 1500 RPM suitable for above output of alternator at typical site conditions and conforming to BS 5514,BS 649, IS 10000 or latest, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. 3 Engine mounted Instrument panel fitted with and having digital display for: Start-Stop switch with key, Water temperature indication, Lubrication oil pressure indication, Lubrication oil temperature indication, Battery charging indication, RPM indication, Over speed indication, low lub. Oil trip indication, Engine hours indication. 4 Alternator: Synchronous alternator, Brushless and single bearing type alternator capable of delivering a minimum 58.5 KVA (Corresponding to typical site condition ) 415V at 1500 RPM, 3 phase 50Hz, AC supply with 0.8 lagging Power factor. The alternator shall be having Screen protected Drip Proof enclosure, brushless, continuous duty, self-excited and self regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions alongwith suitable size PVC insulated copper conductor interconnection cable in suitable pipe between alternator and AMF control panel. 5 ACOUSTIC ENCLOSURE (noise level less than or equal to 75 db at a distance of 1 m from of Acoustic enclosure): Weather proof pre-fabricated factory built, free standing, floor mounting type acoustic encloser of modular construction suitable for accommodating 58.5 KVA Engine Alternator set with standard control/ instrument panel, fuel tank etc with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per CPWD specifications. The inside of enclosure should have atleast two nos. LED tubelight luminaire controlled by an adequate switch. 6 Control panel: Fabricating, Installing, Testing & Commissioing of weather proof outdoor type Automatic mains Failure Control Panel including auto by-pass panel, suitable for 58.5 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, resticted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all completed and inter locking including the following: 7 100 Amps. (minimum or as per directions) Four poleMCCB, withrotary operating mechanism with phase barriers - 2 nos or suitable (For mains and alternator) 8 100 Amps. (minimum or as per directions), FPpowercontactor- 2 sets or suitable (For mains and alternator) with interlocking arrangement. 9 Auto/Manual/Off selector switch 10 2 Nos over voltage relay, 2Nos reverse power relay and 2 Nos under voltage relay 11 3 sets of current transformers 15P 10 accuracy for protection and 15 VA class-I for metering 12 Energy analyser unit to indicate current volatge frequency power factor and KWH 13 Indicating lamps for load on mains and load on set 14 Fuse for instruments 15 Battery charger, complete with transformer/rectifier, DC voltmeter and ammeter, selector switch for tricker, off and boost and current adjustment. 16 Main supply failure monitor 17 Supply failure timer 18 Restoration timer 19 Control unit with three impulse automatic engine start/stop and failure to start lockout 20 Impulse counter with locking and reset facility 21 ON/OFF/Control circuit switch with indicator 22 Audio/Video annuciation fori) High water temperatureii) Low lubricating oil pressureiii) Engine over speediv) Engine fails to startv) Full load/maximum load warning 23 Providing, Installation, Testing and Commissioning of the above 58.5 KVA DG set with acoustic enclosure and AMF control panel (if) with all equipments, accessories and associated items on the cement concrete floor / foundation (with vibration isolation arrangement) (A PCC(1:2:4, M-20 grade) foundation of weight 2.5 times the operating weight of the Genset with enclosure or as recommended by the Genset manufacturer OEM/OEA, whichever is higher. The foundation should be min 300 mm high from the ground level. The length and breath of foundation should be at least 250mm more on all sides than the size of the enclosure) including providing necessary fuel MS piping and conducting Acceptance Testing of the Engine Alternator by arranging necessary consumables like Lube oil, fuel oil, providing artificial resistive load with cabling ,switching arrangements etc. for pre Acceptance Testing ( i.e, 10 hours full load, 1 hour 10% overload and 1 hour at no load or as per directions/specifications) and final Acceptance Testing of DG set (i.e.running of DG set on full load for 6 hours and running on 10% overload for 1 houror as per directions/specifications) including topping up of lube oil up to full marksuitable for 2 hours full load working etc. as per specifications as required. The Construction of DG Sets PCC Foundation (upto depth of 200 mm) and other materials as required for ITC of DG Set shall be in the scope of contractor. 24 Supply of PVC insulated and PVC sheathed XPLE power cable of 1.1 KV grade armoured aluminium conductor cable conforming to IS 7098 part 1 with up-to-date amendment of the following size as required. 25 4 x 35 sq. mm 26 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 27 4 x 35 sq. mm (32 mm) 28 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size directly in ground including excavation ,sand cusioning, protective coveringandrefilling the trench as required. 29 Upto 35 sq. mm 30 LayingandfixingofonenumberPVCinsulatedandPVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 31 Upto 35 sq. mm (Clamped with 1 mm thick saddle) 32 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. 33 Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I, nut, bolt, spring, washer excavation and re-filling etc. as required. 34 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required 35 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 36 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. 37 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Chhattisgarh View Result →
32.
Housing Urban and Rular Development #9381143 Technical Bid
Construction of Proposed Interior Works at office ofChakradharpur Nagar Parishad (Jharkhand) , Table 1 – 2100 L X 900 W X 750 H Mm 2) Side Table- 900 L X 450 W X 675 H Mm 3) Table Top & Gable End - 25Mm Thick Moisture Resistant Board.4) Side Combo Undercounter Storage -As Per Approved Shade With Handles/Locks & Required Accessories. The Back Of The Unit Is Made From 18 Mm Moisture Resistant Board. 5) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly.6) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. 7) In Under Table Storage: Moisture Resistant Board With 3 Drawer (2 Drawer + 1 Filing) With Roller Slide Mechanism For 2 Drawers And Ball Bearing Slide For 1 Filing Unit. , Table 3 – 1200 L X 675 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Table 5 – 1500 L X 675 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Table 6 – 1500 L X 600 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Table 7 – 1200 L X 450 W X 900 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Table 8 – 2400 L X 525 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Table 9 – 7200 L X 1500 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Table 10 – 5175 L X 750 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Executive Chair - Product Dimensions: Length (76 Cm), Width (67 Cm), Height (101 Cm) (2)High Back Chair With Back & Seat: Ply Base Construction With High Density Foam & High Grade Leatherite Upholstery With Height Adjustment, Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 48Kg/M³ And The Back Shall Be Made Of Plywood Padded With High Resilience Polyurethane Foam Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. (3) Arm Rest: Wooden Fixed Armrest With Leatherite Padded, The Chair Shall Be Supplied With Hard Wood With Polish Cushion Arm Having Leatherite Top Completely Joint With Seat & Back. (4) Mechanism: Multi Locking Synchronized Tilt; For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat.(5) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , High Back Chair - Product Dimensions: Length (70 Cm), Width (67 Cm), Height (100 Cm) 2. Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. 3. Primary Material: Glass-Filled Poly-Amide, Upholstery Material: Fabric/Color: Carbon Black/ Navy Blue, Finish: Matte, Style: Contemporary/Adjustable Armrest 4. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. 5. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. 6. For Seating Durability The Chair Shall Have Centre Tilt 360 Degree Revolving Mechanism And Tilt Tension Adjustment Which Provides Back Strength For The Chair. 7. Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Mid Back Chair -Product Dimensions: Length (51 Cm), Width (65 Cm), Height (95 Cm) 2. Providing And Supplying A Mid Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. 3. Primary Material: Glass-Filled Poly-Amide, Upholstery Material: Fabric/Color: Carbon Black/ Navy Blue, Finish: Matte, Style: Contemporary/Adjustable Armrest 4. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. 5. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. 6. For Seating Durability The Chair Shall Have Centre Tilt 360 Degree Revolving Mechanism And Tilt Tension Adjustment Which Provides Back Strength For The Chair. 7. Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Static Visitor Chair - Sled Based Visitor: The Visitor Chairs For Office Have A Cantilevered, Tubular Under Structure That Is Responsive To Body Movements And Provides Greater Comfort. (2). Contoured Backrest: The Backrest Is Specifically Designed For The Human Body With Contoured Lumbar Support Which Protects The Spine And Leaves The Shoulder Free For Easy Movement. (3). Thick Foam: The Backrest And Seat Comes With A Thick Foam That Makes Seating A Pleasure. (4). One Piece Armrest: The Armrests Are Made Of One Piece , Well Rounded Polyurethane, That Is Indifferent To Climatic Conditions. (5). Ergonomic Seat: The Seat Is Scientifically Designed For Even Distribution Of Body Weight Which Reduces Fatigue (6). Dimensions W X H X D (Cm): 55 X 80.5 X 61 (7). Finish Color : Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Table 13 – 1375 L X 450 W X 750 H Mm2) Table Top & Gable End - 25Mm Thick Moisture Resistant Board .3) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly. 4) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority.. , Sofa Set 1 Seater -Armrest Frame: Plywood, Polyurethane Foam 2.0 Lb/Cu.Ft., Polyester Wadding, Particleboard, Nonwoven Polypropylene, Solid Wood, Fiberboard 2. Leg: Polypropylene 3. Coated Fabric Parts: 100 % Polyurethane, 75 % Polyester, 25 % Cotton 4. Main Parts: Dyed Through Top-Grain Leather With A Treated, Embossed And Pigmented Surface Sofa Section 5. Frame: Plywood, Polyurethane Foam 1.2 Lb/Cu.Ft., Polyester Wadding, Particleboard, Solid Wood, Fiberboard 6. Seat Cushion: High-Resilience Polyurethane Foam (Cold Foam) 2.2 Lb/Cu.Ft., Polyester Wadding 7. Back Cushion: 30% Cut Polyurethane Foam/ 70% Polyester Fibers 8. Coated Fabric Parts: 100 % Polyurethane, 75 % Polyester, 25 % Cotton Main Parts: 9. Dyed Through Top-Grain Leather With A Treated, Embossed And Pigmented Surface10. Measurements Height Including Back Cushions: 80 Cm Width: 92 Cm Depth: 86 Cm Height Under Furniture: 4 Cm Armrest Width: 15 Cm Armrest Height: 65 Cm Seat Width: 65 Cm Seat Depth: 55 Cm Seat Height: 45 Cm11. Finish Color: Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Sofa Set 2 Seater -Armrest Frame: Plywood, Polyurethane Foam 2.0 Lb/Cu.Ft., Polyester Wadding, Particleboard, Nonwoven Polypropylene, Solid Wood, Fiberboard 2. Leg: Polypropylene 3. Coated Fabric Parts: 100 % Polyurethane, 75 % Polyester, 25 % Cotton 4. Main Parts: Dyed Through Top-Grain Leather With A Treated, Embossed And Pigmented Surface Sofa Section 5. Frame: Plywood, Polyurethane Foam 1.2 Lb/Cu.Ft., Polyester Wadding, Particleboard, Solid Wood, Fiberboard 6. Seat Cushion: High-Resilience Polyurethane Foam (Cold Foam) 2.2 Lb/Cu.Ft., Polyester Wadding 7. Back Cushion: 30% Cut Polyurethane Foam/ 70% Polyester Fibers 8. Coated Fabric Parts: 100 % Polyurethane, 75 % Polyester, 25 % Cotton Main Parts: 9. Dyed Through Top-Grain Leather With A Treated, Embossed And Pigmented Surface10. Measurements Height Including Back Cushions: 80 Cmwidth: 92 Cm Depth: 90 Cm Height Under Furniture: 4 Cm Armrest Width: 15 Cm Armrest Height: 65 Cm Seat Width: 140 Cm Seat Depth: 55 Cm Seat Height: 45 Cm11. Finish Color: Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Sofa Set 3 Seater -Armrest Frame: Plywood, Polyurethane Foam 2.0 Lb/Cu.Ft., Polyester Wadding, Particleboard, Nonwoven Polypropylene, Solid Wood, Fiberboard 2. Leg: Polypropylene 3. Coated Fabric Parts: 100 % Polyurethane, 75 % Polyester, 25 % Cotton 4. Main Parts: Dyed Through Top-Grain Leather With A Treated, Embossed And Pigmented Surface Sofa Section 5. Frame: Plywood, Polyurethane Foam 1.2 Lb/Cu.Ft., Polyester Wadding, Particleboard, Solid Wood, Fiberboard 6. Seat Cushion: High-Resilience Polyurethane Foam (Cold Foam) 2.2 Lb/Cu.Ft., Polyester Wadding 7. Back Cushion: 30% Cut Polyurethane Foam/ 70% Polyester Fibers 8. Coated Fabric Parts: 100 % Polyurethane, 75 % Polyester, 25 % Cotton Main Parts: 9. Dyed Through Top-Grain Leather With A Treated, Embossed And Pigmented Surface10. Measurements Height Including Back Cushions: 80 Cm (31 1/2 )Width: 241 Cm (94 7/8 ) Depth: 98 Cm (38 5/8 ) Height Under Furniture: 4 Cm (1 5/8 ) Armrest Width: 15 Cm (5 7/8 ) Armrest Height: 65 Cm (25 5/8 ) Seat Width: 211 Cm (83 1/8 ) Seat Depth: 55 Cm (21 5/8 ) Seat Height: 45 Cm (17 3/4 )11. Finish Color: Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Central Table -Dimensions W X H X D (Cm):100 X 45 X 65 (2). Finish Colour : Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. (3). Primary Material : Solid Wood(4). Style: Contemporary & Modern (5). Complementing Design & Aestehtics The Simple Yet Sleek Design Of The Coffee Table Will Help It Complement The Existing Decor Of Your Living Space And Blend In Well With Your Choice Of Sofas And Couches (6). Tempered Glass Top The 10Mm Thick Tempered Glass Top Is Built To Hold Up To 40 Kgs Of Weight. So Stack The Table Up With Your Essentials And More! (7). Storage Space The Tables Storage Neatly Tucks Away All Your Essential Tit-Bits Like Magazines And Board Games To Maintain The Aesthetic Look. (8). Easy Maintenance With Its Smooth And Neat Finish. , 3 Seater Steel Chrome Chair Product Dimensions ?64D X 180W X 80H Centimeters Size ?Standard Back Style ?Solid Back Special Feature ?Steel Product Care Instructions Wipe Clean Seat Material Type Metal Recommended Uses For Product Offie Finish Type Chrome Finish Steel Included Components Powder Coated Steel Seat , Chrome Plated Handles And Legs Ms Beam In Black Colour Shape Rectangle Surface Recommendation Hard Floor Form Factor Contemporary Furniture Finish Chrome Colour Silver All Complete As Per The Direction Of Engineer-In-Charge , Decorative Flower Pot - Material - Steel Usage - Decoration Feature - For Office, Home Decor & Gardenetc Color - Black, White , Grey, Cream, Golden Etc. All Complete As Per The Direction Of Engineer-In-Charge , File Cabinet-Dimension: 900 Mm(W) X 400Mm(D) X2100 Mm(Ht) 2) Storage Top Is Made Up Of 18Mm Thick, Moisture Resistant Board. Storage Carcass 18Mm Thick Plpb & Shutter Is 18Mm Thick Plpb. Back In 9Mm Thickmoisture Resistant Board Storage Is Having Openable Shutter With Locking Arrangement & 18Mm Thick.3) Hardware Included (I.E. Hinges , Handle & Lock) 4) Performance: Material Should Be Of Anti-Scratch, Anti-Dirty, Anti-Fungal/ Moistureresistant Under Humid Conditions, Water Proof, Shock Resistance And Environmentally Friendly.5) Colour/ Shade Can Be Finalized After Communication With Bid Inviting Authority. , Premium Quality Manually Operated Vertical Blinds Of Prescribed Size With Prestressed Micro-Aerated Solar Protection Fabric Of High Tenacity Polyester Yarn With Pvc Coating &Fungistatic Treatment And Should Block The Light Flux & Offer Elimination Of Glare And Sunlight. Fabric For Blinds: Composition: 40% Polyester / 60% Pvc, Weight:400 G/M2 (+/-5%), Thickness:0.45 Mm (+/-5%), Fabric Openess Factor: 4% , Tensile Strength (Warp/Weft): 220/220 Dan / 5Cm, Tearing Strength (Warp/Weft): 30/25 Dan, Fire Retardancy:M2 (Nfp92-507)- Roller Tube Shall Be Of Extruded Aluminum Alloy 38Mm O.D (Or As Per System Dimension) With A Minimum Wall Thickness Of 1.0Mm Duly Anodized For Long Life. Clutch Shall Be Wrap Spring Design With High Strength Fiberglass Reinforced Polyester Assembly And High Carbon Steel Springs To Transmit Motion From Driving To Driven Members Of Clutch Mechanism. Clutch Shall Operate Directionally With The Use Of An Endless Beaded Chain. Clutch Mechanism Shall Be Crash Proof, Prevent Slippage And Shall Raise And Lower Smoothly To Any Desired Height. Clutch Shall Never Need Adjustment. Idler Shall Be Of High Strength Fiberglass Reinforced Polyester,Consisting Of An Outside Sleeve And Center Shaft. Sleeve Shall Provide Bearing Surface For Roller Tube And Rotate Freely On Center Shaft, Providing Smooth, Quiet And Long Wearing Operation. Etc All Complete As Per The Direction Of Engineer-In-Charge , Door Pinning- 4 X 3 Wide Bit Of 18 Mm Thick Moisture Resistant Plyboard Shall Be Used On Door Frame & Finished With 0.8 Mm Decorative High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Etc All Complete As Per The Direction Of Engineer In Charge , Aluminium Partition System Having Minimum Main Frame Size Of Vertical Of 100Mm X 55Mm X 2Mm Thick And Aluminium Horizontal Minimum Size Of 75Mm X 65 X 2Mm Made Out Of Specially Designed Extruded Aluminium Sections To Withstand Support Section And Fabricated, Fixed At All Levels, Elevation And Heights To The Masonry / Rc Walls / Rc Supporting Elements With Necessary Clamps, Brackets And Anchor Fasteners. All Clamps And Brackets Shall Be Mild Steel Hot Dip Galvanized Minimum 80 Microns Thick And Shall Conform To Is: 4759-1996. The Extruded Aluminium Section Shall Be Powder Coated In Approved Colour With A Anodic Coating Of Minimum 15 Microns. Extruded Section Shall Be Of 6063 T5 Or T6 Alloy Conforming To Astm B 221. Any Other Fastening Straps, Nuts, Bolts, Rivets, Washers, Etc. Shall Be In Stainless Steel Ss 304 Grade. , Ac 1.5 Ton - Type - Split Capacity - 1.5 Ton Star Rating - 3Star Colours - White Cooling Capacity - 5150W Compressor - Rotary Refrigerant - R32 Operating Modes - Comfort Sleep, Modes - (Auto/Cool/ Fan / Dry), Precision Cooling-Decimal Setting, Turbo Cooling Dehumidification -Yescondenser Coil - Copper Remote Control - Yes Indoor W X H X D - 965 Mm X 319 Mm X 215 Mm Indoor Unit Weight - 9 Kg Outdoor W X H X D - 968 Mm X 652.5 Mm X 367 Mm Outdoor Unit Weight - 32Kg Cooling Coverage Area - Upto 165 Sqft Power Requirement - Ac 230 V 50Hz Power Consumption - 1450 W Auto Air Swing - Yes Other Air Flow Features - Air Vent: Cross Flow Anti-Bacteria Filter - Yes Dust Filter - Yes Auto Restart - Yes Brand - Any Approved Brand As Per The Direction Of Engineer - In- Charge , Ac 2 Ton - Type - Split Capacity - 2 Ton Star Rating - 3Star Colours - White Cooling Capacity - 5150W Compressor - Rotary Refrigerant - R32 Operating Modes - Comfort Sleep, Modes - (Auto/Cool/ Fan / Dry), Precision Cooling-Decimal Setting, Turbo Cooling Dehumidification -Yescondenser Coil - Copper Remote Control - Yes Indoor W X H X D - 965 Mm X 319 Mm X 215 Mm Indoor Unit Weight - 9 Kg Outdoor W X H X D - 968 Mm X 652.5 Mm X 367 Mm Outdoor Unit Weight - 32Kg Cooling Coverage Area - Upto 165 Sqft Power Requirement - Ac 230 V 50Hz Power Consumption - 1450 W Auto Air Swing - Yes Other Air Flow Features - Air Vent: Cross Flow Anti-Bacteria Filter - Yes Dust Filter - Yes Auto Restart - Yes Brand - Any Approved Brand As Per The Direction Of Engineer - In- Charge , Desktop All In One - Operating System - Windows 11 Home Processor - Min. Amd Ryzen-3 Or Equivalent Memory - 8 Gb Ram Memory Slots - 2 Sodimm Hard Drive - 512 Gb Ssd Screen Size - 20 Graphics - Inbuilt Keyboard & Mouse Power - 65 W Smart Ac Power Adapter Dimension - 49.03 X 20.45 X 38.07 Cm Weight - 5.7 Kg Any Approved Brand All Complete As Per The Direction Of Engineer-In-Charge , Printer - Cartridge Technology Composite Cartridge Printing Technology Laser Type Of Printing Mono Paper Size A4 Print Speed Per Minute As Per Iso/Iec 24734 In (A4) Size - Mono 20 Resolution (Dpi) 600X600 Memory (Mb) 64 Processor Speed 400 Mhz Network Connectivity Yes Wireless Connectivity Yes If Yes, Type Of Wireless Connectivity Wireless (802.11 B/G/N) Usb Port Yes Number Of Main Paper Trays 1 Each Main Paper Tray Capacity 150 Yield Of The Cartridge/Ink Tank/Ink Pack Supplied With Machine As Per Iso/Iec: 19752/2004(E) For Black (Number Of Prints) 1500 Duty Cycle (No Of Prints/Month) 10000 Minimum Operating Temperature (Degree C) 10 Maximum Operating Temperature (Degree C) 30 Minimum Operating Humidity (%Rh) 20 Maximum Operating Humidity (% Rh) 70 Dimensions(In Mm X Mm X Mm ) 331 X 215 X 178 Weight (In Kg) 4.18Brand Any Approved Brand All Complete As Per The Direction Of Engineer-In-Charge , Logo Shall Be Of Approved Design With 4 Mm Thick Acrylic Sheet Finished With Vinyl Coating. , Cool White 15W Led Surface Light Luminaire Class (As Per Cl. 2.1 Section 2 Of Is: 10322 (Part-1) Class I Types Of Led Modules As Per The Is: 16103(Part-2)/2012 Type 3 Photo Biological Safety Of Leds Used Shall Be As Per Is:16108/2012 (Exempt Group) Yes Dc Or Ac Supplied Electronic Control Gear For Led Module Shall Comply Is:15885 (Part 2/Sec.13) Yes Conformity To Indian Standard Is:10322-5-2(2012) Type Of Fixture Square Material Pvc Color Temperature (+/-10%)6000K Wattage 5 Watt Constructionalall Fasteners Must Be Of Nickel/Chrome Plated Yes The Luminaire Body Must Be Corrosion Resistant Epoxy Powder Coated / Anodizing Yes Mounting Type Surface Diffuser Material Poly Carbonate (Uv Stabilized) Mounting Fixture Ss Spring Clip Ingress Protection (Ip Rating) As Per Is:10322 (Part 1) Latest Ip20electrical Efficiency Management The Total Circuit Power Shall Not Be More Than 110 Percent Of The Value Declared By The Manufacturer (As Per Cl 8 Of Is:16104:2012 Lates) Yes Total Harmonics Distortion 15% Frequency 50 Hertz Ac Power Factor 0.95 Operating Voltage 230 Volt Driver Independent Optical Management Light Color Warm White Reflector Type Diffuser System Lumen Output 900 Lumen System Luminous Flux Efficacy (Lm/W) 100 Brand Any Approved Brand As Per The Direction Of Engineer-In-Charge , Inverter Set Optimus 2300 Pure Sine Wave 2000Va/24V Inverter With Red Charge Rc18000 Tall Tabular 150Ah Battery - 2 Batteries Inverter Details- Type: Pure Sine Wave ; Va Rating: 2000Va/24V; Supports: Double Battery Each Of 12 Volt; Peak Load: 1600W; Output Voltage : 220V (Inverter Mode) Battery Details- Type: Tall Tubular Battery; Construction: Rugged, Rated Capacity: 150 Ah/12V, Water Level Indicators: 6 Informative Lcd Display : Smart Lcd Display With Unique Indication That Displays Backup And Charging Time, Along With Mains On, Eco/Ups Mode; Super Fast Battery Charging : Maximum Charging Current 21A For The Faster Battery Charging Inverter Dimensions: 30X32.6X28.4 Cm Battery Dimensions: 50.2 X 19.1 X 44.0 Cm Material: Metal & Plastic Brand: Any Approved Brand As Per The Direction Of Engineer-Incharge , Sound Syetem Inconference Hall Ceiling Speaker Ahuja - 8 Nos.Cma 5400 Amplifier - 1 Nos.Cmd 5100 Mike - 1 Nos.Cmc 5200 Mike - 25 Nos.Speaker Wire - 200 Mtr Ceiling Speaker 10 W - 8 Nos Input Power 10W Rms Power Taps On 100V 10/5/2.5W Impedance 1K/2K/4K? Frequency Response 60-15,000Hz Spl At 1Khz (1W/1M) 92Db Dimensions Ø204 × H79 Mm Weight 0.89Kg Central Mixer Amplifier - 1 Nos Line Output 1 17.5V Dc/3A Max.; -34Dbv (20Mv) Line Output 2 17.5V Dc/3A Max.; -34Dbv (20Mv) Power Output 50W Rms At 2% Thd, 90W Max. Inputs 3×Mic 0.65Mv/4.7K?, 1×Aux 100Mv/470K? Frequency Response 60-14,000Hz (± 3Db) S/N Ratio > 60Db Tone Controls Bass: -10Db At 100Hz, Treble: -10Db At 10Khz Preamp Output 200Mv/600O Line Output 1V/1K? Send Output 200Mv/600O Return Input 200Mv/10K? Speaker Output 4O, 8O, 16O, 70V & 100V Power Requirement Ac: 220-240V, 50/60Hz, Dc: 24V (2×12V Car Battery) Power Consumption 250Va Protections Ac Fuse 1×3 Amp , Dc Fuse 2×10 Amp. Dimensions W483 × H110× D325 Mm Weight 10.50Kg Mike For Principle Authority - 1 Nos Microphone -63Dbv/?Bar (7.5Mv/Pa) Current Consumption < 50Ma Max. Mic Auto Switch-Off Time 75 Seconds Approx. Input Line Output Line, Headphone Speaker Max Input 300Mw Controls Priority Switch, Talk Switch, Speaker Volume Control, Headphone Volume Control Dimensions W118 × H70 × D160 Mm Weight 1.05 Kg (W/O Cable) Accessories Foam Windshield, 2.5M Interconnecting Cable Mike For Delegate - 25 Nos Microphone -63Dbv/?Bar (7.5Mv/Pa) Current Consumption < 50Ma Max. Mic Auto Switch-Off Time 75 Seconds Approx. Input Line Output Line, Headphone Speaker Max Input 300Mw Controls Talk Switch, Speaker Volume Control, Headphone Volume Control Dimensions W118 × H70 × D160 Mm Weight 1.05 Kg (W/O Cable) Accessories Foam Windshield, 2.5M Interconnectingcable Speaker Wire Packaging Type Coil Temperature Range Processing Andoperating , Deg C (-30 To +80 ) Colour Code Transparentwarranty 1 Year Size (Awg) 20 Width 6 Millimeter Conductors Material Tinned Copperinsulation Material Pvc Thickness 0.7 Millimeter Size (Square Mm) 0.5 Number Of Conductors 2 Power Loss In % 33 Height 2.5 Millimeter Conductor Resistance (Ohms/Km 20 C )(Max) 33Brand Any Approved Brand Like Ahuja Or Equivalent Or As Per The Direction Of E/I , Diesel Engine Engine Shall Conform To Relevant Is/Bs Specifications And Be Complete With Heat Exchanger, Reciprocating Pump And Cooling Water Pump, Oil Pump,Diesel (Fuel) Tank, Selfstarting Motor, Batteries Of Adequate Ampere Hour Capacity For Self-Starting And To Give At Least Three Attempts At One Time. The Engine Shall Be Capable Of Developing Required Hp At Site Conditions And At 1500 Rpm Continuous Duty. Speed Regulation Shall Be Such That From No Load To Full Load, The Variation In Speed Is Minimum, Say Within 5%. Alternator - The Alternator Shall Conform To Is 4722 And Iec 34-1 And Shall Be Of Salient Stationary Pole Revolving Armature Self-Excited Self Compensated Type And Designed For 415 Volts, 50 Hz, 3 Phase Output At 1500 Rpm Capacity Of 160 Kva At 0.8 Pf Lag, At Site Condition. The Voltage Regulation Shall Not Be More Than 5% Over The Full Load Range Including The 5% Speed Regulation Of Prime Mover. The Alternator Shall Be Directlycoupled To The Diesel Engine Through Flexible Coupling. The Design Shall Be Such That The Harmonics Are Minimum. The Power Supply Terminals Including The Neutral Shall Be Brought Out In A Suitable Cable Entry Box As Directed. Acoustic Enclosure - The Generating Sets Are Housed Inside A High Quality Acoustic Enclosure Having Salient Features & Constructional Features Such As Compact, Modular Construction And Sleek Design With Low Noise Level (75 Dba) At A Distance Of 1 Meter In Open Environment. Soundproof, Weatherproof, And Environment Friendly Silent Set. The Acoustic Enclosure Is Manufactured, Powder Coated And Lined With Fire Proof Acoustic Material Light Resin Rock Wool As Per International Standards & Meeting Latest Cpcb/Local Pcb Norms. Made Out Of 1.5 To 2 Mm Thick Crca Sheet, Compact Sleek Design Confirming To International Standards & Meeting Cpcb/ Local Pcb Norms. Exhaust Silencer To Be Of Residential Grade Type Mounted Outside The Enclosure, Exhausting To Atmosphere. Micro-Processor Based Amf Control Panel: - The Microprocessor Based Control Panel Shall Be Designed For Automatic On Mains Failure’ Operation Of The Generatorset. The Panel Shall Be Floor Standing Cubicle Pattern, Fabricated Out Of 14 & 16 Swg. M.S. Sheet And Paintedwith Powder Coated Of Approved Quality Shade Withappropriate Ventilating Arrangement. The Panel Shall Becomplete With The Inter Connections, Insulators 2Numbers Earthling Plug And Shall Incorporate Thefollowing: Selector Switch Voltmeter - Off/Ry/Yb/Br Ammeter 0-100 A Selector Switch Ammeter - Off/R/Y/B Voltmeter 0-600 V Frequency Meter (Digital) Set Of Current Transformer Of Suitable Ratio Built-In Smps Charger Or Boost Cum Trickle Battery Charger Consisting Of- (A) Transformer/Rectifier (B) Dc Ammeter (C) Dc Voltmeter (D) Charging Rate Selector Switch Set Of Led Lamps For Start Failure, High Temperature Trip, Protection For Ac Generator Main Supply Voltage Monitor With Under/Over Voltage Adjustable Setting. Set Of Control Relays Set Of Indicating Lamp Load On Set, Load On Mains, Start Failure, High Temperature Trip, Low Oil Pressure, High Temperature Warning, Battery Low. Push Buttons For Start, Stop, Reset/Alarm Acknowledge/Dg/Mains Supply Contractors Close/Open And Test Toggle Switch For Hooter On/Off 3 Phase 4 Wire Unbalanced Type , External Logo As Per Approved Design Of Size 885 Mmx 750 Mm Made Up Of Acrylic Material. , Technology Lcd Projection Method Front And Rear Both Native Resolution 1920 X 1080 (Full Hd) Brightness (Lumens) 4000 Contrast Ratio (Minimum) (Pixels )( X :1) 1000 Optical Zoom Yes If Yes, Optical Zoom (%) 135 Availability Of Lens Yes Remotely Controlled Yes If Yes, Type Of Projector Long Throw (Above 2.5) Aspect Ratio 16:09 Keystone Correction Automatic & Manual Both Type Of Light Source Led Minimum Life Of Light Source (In Normal Mode) (Hours) 30000 Lamp Hour Counter (In-Built) Yes Inbuilt Speaker Yes If Yes, Wattage Of Speaker 2 3D Projection Capability No Interactive Feature Yes Power Consumption In Sleep Mode (Watts) 327 Power Consumption In Normal Mode (Watt) 3 Noise Level In Echo Mode (Db) 35 Noise Level In Normal Mode (Db) 34 Power Supply 210V-240V, 50 Hz Dimensions (Length X Breadth X Height) (Mm X Mm X Mm) 325 X 240 X 106 Mm Weight (Kg) 2.5 Minimum Operating Temperature (Degree C) -18 Maximum Operating Temperature (Degree C) 36 Minimum Operating Humidity ( % Rh) 10 Maximum Operating Humidity ( % Rh) 65 Ports & Connectivity Number Of Hdmi In Port 2 Number Of Hdmi Out Port 2Audio In Yes Audio Outyes Video In Yes Storage Media Port Yes If Yes, Supported File Formats Mpeg -1,Mpeg-2,Dvd-Lpcm Number Of Usb Type A 1 Number Of Usb Type B 1 Wi Fi Connectivity Yes Wireless Screen Share Yes Lan Connectivity Yes Technology Lcd Projection Method Front And Rear Both Native Resolution 1920 X 1080 (Full Hd) Brightness (Lumens) 4000 Contrast Ratio (Minimum) (Pixels )( X :1) 1000 Optical Zoom Yes If Yes, Optical Zoom (%) 135 Availability Of Lens Yes Remotely Controlled Yes If Yes, Type Of Projector Long Throw (Above 2.5) Aspect Ratio 16:09 Keystone Correction Automatic & Manual Both Type Of Light Source Led Minimum Life Of Light Source (In Normal Mode) (Hours) 30000 Lamp Hour Counter (In-Built) Yes Inbuilt Speaker Yes If Yes, Wattage Of Speaker 2 3D Projection Capability No Interactive Feature Yes Power Consumption In Sleep Mode (Watts) 327 Power Consumption In Normal Mode (Watt) 3 Noise Level In Echo Mode (Db) 35 Noise Level In Normal Mode (Db) 34 Power Supply210v-240V, 50 Hz Dimensions (Length X Breadth X Height) (Mm X Mm X Mm) 325 X 240 X 106 Mm Weight (Kg) 2.5 Minimum Operating Temperature (Degree C)-18 Maximum Operating Temperature (Degree C)36 Minimum Operating Humidity ( % Rh) 10 Maximum Operating Humidity ( % Rh) 65 Ports & Connectivity Number Of Hdmi In Port 2 Number Of Hdmi Out Port 2 Audio In Yes Audio Out Yes Video In Yes Storage Media Port Yes If Yes, Supported File Formats Mpeg -1,Mpeg-2,Dvd-Lpcm Number Of Usb Type A 1 Number Of Usb Type B 1 Wi Fi Connectivityyeswireless Screen Shareyeslan Connectivity Yes , Ptz Camera , Electric Podium , Integrative Panel For Conference Hall , All In One P.C. I7, 13Th Generation , Smart Tv , Kitchen Basic Items (Gas Stove, Cup Set, Glass Etc) , Water Dispenser Hot, Cold, Normal Water Dispenser , Wood Flooring 25 Mm Wooden Planking, Tongued And Grooved In Flooring, Including Fixing With Iron Screws Complete With Second Class Teak Wood , Providing 12Mm. Flat Pressed Particles Board Ceiling With Ceiling With 120X60mm. Sal Wood Beams At 122Cm. Centers And 60X40mm . Sal Wood Runners At 122Cm Centers Including Cost Of 2 Coats Of Wood Preservative Paint Of Approved Make, Fixing At Site And Taxes All Complete As Per Approved Drawing, Building Specification Anddirection Of E/I. , Providing Wall Panelling Witn 3.5Mm Thick Teak Veneered Decorative Ply Wood: Of Standard Make. Fitted And Fixed Over, 50X12mm Sal Wood Beads At 122Mm Centres Properly Screwed To Walls Including Cost Of Spirit Polishing Over Ply Wood And 2 Coals Of Wood Preservative Paint Over The Beads Of Approved Shade And Make All Complete As Per Specification And Directionofe/I , Providing Two Coats Of Plastic Emulsion Paint Of Approved Shade_And Make Over A Coat Of Cement Primer Over New Surface Including Preparing Plastered Surface By Rubbing Smooth With Pumice Stone Or Fine Sand Paper, Applying Putty Wherever Required, Scaffolding Do-
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jharkhand View Result →
33.
Health and Family Welfare #9361795 Price Bid
Tender Invitation For Purchase Of Medicines/Materials/Equipment Etc. For District Hospital Shivpuri , Tender Invitation For Purchase Of Medicines/Materials/Equipment Etc. For District Hospital Shivpuri , 10% Amino Acid + Electrolyte Inj. , 10% Entravenec Fate Emlusion 10% Inj. , 5 Fu 250Mg. Inj. , 5 Fu 500Mg. Inj. , 5% Amino Acid + 5% Sarbitol Inj. , 5% Amino Acid + Sarbitol Inj. , A&D Cap , Aaya Gown Pink Colour , Abacavir 300Mg Tablet , Abdominal Belt , Abdominal Drain Kit All Size , Abdominal Gauze Sponge 30X30 , Abgel , Absorbant Cotton 100 Gm Net , Absorbant Cotton 250 Gm Net , Absorbant Cotton 400 Gm Net , Absorbant Cotton 500 Gm Net , Acarbose 50Mg Tablet , Aceclofenac 100Mg + Paracetamol 325Mg + Chlorzoxazone 250Mg Tablet , Aceclofenac 100Mg + Paracetamol 325Mg + Serratiopepdise10mg Tablet , Aceclofenac 100Mg + Paracetamol 325Mg Tablet , Aceclofenac 100Mg Tablet , Aceclofenac 50Mg + Paracetamol 125Mg 60Mlsyrup , Aceclofenac 50Mg/5Ml Syrup , Acetazolomide 250Mg Tablet , Acetone Detection Kit 150 Tests , Acetylsalicylic Acid (Aspirin 25 Mg)Tablet , Acetylsalicylic Acid 150Mg Tablet , Activated Charcoal 400Mg Tablet , Acyclovin 3Mg Oint , Acyclovir 0.5% 5Ml Eye Drop , Acyclovir 200Mg Tablet , Acyclovir 250Mg Injection , Acyclovir 400Mg Tablet , Acyclovir 500Mg Injection , Acyclovir 800Mg Tablet , Ad Tape10cm X5mtr , Ad Tape10cm X8mtr , Ad Tape2.5Cm X 5Mtr , Ad Tape2.5Cm X 8Mtr , Ad Tape7.5Cm X 5Mtr , Ad Tape7.5Cm X 8Mtr , Ad Tape 5Cm X 5Mtr , Ad Tape 5Cm X 8Mtr , Adenachrome (Chromstate) Tablet , Adenachrome 3Mg/2Ml 2Ml Injection , Adenachrome 5Mg/5Ml 5Ml Injection , Adenosine 6Mg/2Ml Injection , Adrenaline 1Ml Injection , Aed , Aero Mist (Neonate) , Ags 10000Iu/Ml Injection , Air Bad Romsons , Airbed , Alb, Glucose, Ph Strips 100 , Albendazole 200Mg/5Ml 10Ml Syrup , Albendazole 400Mg Tablet , Albert Stain I,Ii Setper Set , Albumin & Glucose Strips 100 , Albumin (Bcg Method) (Liquistat) 4 X50ml , Albumin (Erba)5X50ml , Alchohol Tester , Alkaline Phosphatas Each , Alkaline Phosphatase(Pnpp) Kinetic 4 X50ml , Alklinephosphet Kit10*5 Ml , Allies Tissue Forcep 6 , Allies Tissue Forcep 7 , Allies Tissue Forcep 8 , Allopurinol 100Mg Tablet , Allopurinol 300Mg Tablet , Alluminium Foil Roll , Alpha-Beta Arteether 150Mg/2Ml 2Ml Injection , Alphacalcidol Cap , Alprazolam 0.25Mg Tablet , Alprazolam 0.50Mg Tablet , Ambroxol Hcl 15Mg+Terbutaline Sulphate 1.25Mg+Guaiphenesin 50Mg 5Ml((Additional Composition Of Menthol Also Acceptable) 100Ml Bottle),Syrup , Amikacin 100Mg 2Ml Injection , Amikacin 250Mg 2Ml Injection , Amikacin 500Mg 2Ml Injection , Amino Acid 7% + Eaa 61% Injection , Amino Acid 8% + Bcaa 42% Injection , Aminophyline 100Mg Tablet , Aminophyline Injection 10Ml , Amiodarone 100Mg Tablet , Amiodarone 200Mg Tablet , Amiodarone Hydrochloride Injection(50Mg /Ml) 3Ml , Amlodipine 10Mg Tablet , Amlodipine 2.5Mg + Ramipril 2.5Mg Tablet , Amlodipine 2.5Mg Tablet , Amlodipine 5Mg + Atenolol 50Mg Tablet , Amlodipine 5Mg + Ramipril 2.5Mg Tablet , Amlodipine 5Mg Tablet , Ammonium Oxited Powder500mg , Amoxicillin + Clavulanic Acid Tablet Kid 228Mg. , Amoxicillin 1000 + Clavulanic Acid 200Mg Tablet , Amoxicillin 200Mg + Clavulanic Acid 28.5 30 Ml Syp , Amoxicillin 250 Mg+ Bromhexine 8 Mg Cap , Amoxicillin 250Mg+ Lactic Acid Basilus 60 Million Spores Cap , Amoxicillin 500Mg + Clavulanic Acid 125Mg Tablet , Amoxycillin 1000Mg+ Potassium Clavulanate 200Mg Injection , Amoxycillin 250Mg + Potassium Clavulanate 50Mg Injection , Amoxycillin 500Mg+ Potassium Clavulanate 100Mginjection , Amoxycillin Inj 250 Mg/Vial Vial , Amoxycillin Trihydrate Disp. Tab. 125Mg. , Amoxycilline 250Mg Cap , Amoxycilline 500Mg Cap , Amoxycilline 5Ml/125Mg30 Ml Syp , Amoxycilline Injection 250Mg , Amoxycilline Injection 500Mg , Amphotericin B Inj Ip 50 Mg(Liposomal Amphotericin B Also Acceptable),Injection , Ampicilline + Cloxacilline Injection(250 Mg +250Mg ) , Ampicilline + Cloxacilline Injection(500 Mg +500Mg) , Ampicilline 125Mg+ Cloxacilline 125Mg Cap , Ampicilline 250Mg + Cloxacilline 250Mg Cap , Ampicilline 250Mg Cap , Ampicilline 30Ml /125Mg Syp , Ampicilline 500Mg Cap , Ampicilline Injection 1000Mg , Ampicilline Injection 250Mg , Ampicilline Injection 500Mg , Ampul Box 12 Hol , Ampul Box 24 Hol , Ampul Box 36 Hol , Amylase (Cnpg3) (Liquistat) 5X10 Ml , Aneroid Sphygmomanometer , Antacid 170Ml Syrup , Antacid Tablet , Antesera A 10 Mlper Pack , Antesera Abd 3*10 Ml Per Pack , Antesera B 10 Mlper Pack , Antesera D 10 Mlper Pack , Anti D Immunoglobulin For Iv/Im Use (Monoclonal) Inj 150Mcg 1 Ml Vial , Anti D Immunoglobulin For Iv/Im Use (Monoclonal) Inj 300Mcg Pfs/Vial , Anti Rabies Vaccine I.P. Inj. Human (Tissue Culture) For I/D And I/M Route 2.5 Iu With(1Ml Diluents),Vial , Anti Scorpion Venom Injection 10 Ml , Anti Snake Venom Inj Polyvalent 10 Ml (Lyophilized) 10 Ml Vial , Anti Tetanus Human Immunoglobulininjection250 Iu /Vial , Anticold 30Ml Drop , Anticold 60Ml Syp. , Anticold Tab. , Antifungal 5 Gm Oint . , Antioxidant Lycopen, Vitamins & Multi Minerals 200Ml Syrup , Antioxidants+ Lycopene+ Vitamins& Multimineralscap , Antioxident Cap , Antioxident With Vitamine & Ginseng Cap. + 15 Ingredients , Arm Siling Balt , Arteether Injection1 Ml , Artemether + Lumefantrine Tab 20Mg +120Mg , Artemether Inj 80 Mg/ Ml 1Ml Amp , Arterly Long 11 Inch Ss , Artery Forcep Straight & Curved5 , Artery Forcep Straight & Curved6 , Artery Forcep Straight & Curved7 , Artery Forcep Straight & Curved8 , Artery Forcep Straight & Curved9 , Artery Forcep Straight & Curved10 , Artesunate + Sulphadoxine + Pyrimethamine(Age Group Of Less Than 1Year) Tab Artesunate 25Mg(3Tab) + Sulphadoxine 250Mg(1Tab)+Pyrimethamine 12.5Mg Tablets Ip(1Tab) 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group 15 Or Above) Tab Artesunate 200Mg (3 Tab) + Sulphadoxine 750Mg (2 Tab) + Pyrimethamine 37.5 Mg (2 Tab) Tab. Ip 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group Between 1-4 Years) Tab Artesunate 50Mg (3 Tab) + Sulphadoxine 500Mg (1 Tab) + Pyrimethamine 25 Mg (1 Tab) Tab. Ip 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group Between 5 To 8 Years) Tab Artesunate 100Mg (3 Tab) + Sulphadoxine 750Mg (1 Tab) + Pyrimethamine 37.5 Mg (1 Tab) Tab. Ip 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group Between 9 To 14 Years) Tab Artesunate 150Mg (3 Tab) + Sulphadoxine 500Mg (2 Tab) + Pyrimethamine 25 Mg (2 Tab) Tab. Ip 1 Combi Pack , Artesunate 60 Mg Tablet , Artesunate 60Mg Injection , Artesunate Powder For Injection 120 Mg(Vial Of 1 Powder Injection With Appropriate Diluents),Injection , Arv Rabies Vaccine Injection I.P. 2.5 Iu Single Dose , Ascorbic Acid 100Mg Tablet , Ascorbic Acid 500Mg Tablet , Aso Titre {Latex Aglatrination}Per Test , Aso Turbilatex (Quantitative)50 Ml , Asprin 150Mg Tablet , Asprin 75Mg Tablet , Atenolol 100 Mg Tablet , Atenolol 25 Mg Tablet , Atenolol 50 Mg Tablet , Atorvastatin 10 Mg Tablet , Atorvastatin 20 Mg Tablet , Atorvastatin 40 Mg Tablet , Atracurium 10Mg/Ml 2.5Ml Vial/Amp Injection , Atropine Sulphateinjection 0.6Mg/Ml 1Ml , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection , Atropine Sulphate 1% 5Ml Eye Drop , Atropine Sulphate Eye 1% Ointment , Attender Gown Grey Colour , Auto Pipete 1 Mlper , Auto Pipete 10 Mlper , Auto Pipete 100 Mlper , Auto Pipete 2 Mlper , Auto Pipete 25 Mlper , Auto Pipete 5 Mlper , Auto Pipete 50 Mlper , Auto Pipete Tipswhite / Blue Bigper , Auto Pipete Tips 0-100 Ml White Per , Auto Scope , Autoclave Electric 20 Lte , Autoclave Indicator Tape , Autoscope , Avastin 100Mg. Inj. , Azithromycininjection 100Mg 5Ml , Azithromycininjection 200Mg 5Ml , Azithromycin 200Mg/5Ml 15Ml Syp , Azithromycine 250Mg Tablet , Azithromycine 500Mg Tablet , B.P. Instument Dial Type , B.P. Instument Digital , B.P. Instument Wall Type , B.P.Handle 3 & 4 , B.P.Instument Mercuri , B.P.Instument Mercuri Free Lcd , B.P.Instument Mercuri Stand Modle , Baby Clothkit 4Pcs , Baby Credle , Baby Diaper , Baby Feeding Spoon , Baby Warmer , Baclofen(40 Mg Tab),Tablet , Bad Side Locker , Bag For Carrying Kit / Material During Home Visit For Asha , Bain Circuit Adult , Bain Circuit Child , Bandage 2X10m , Bandage 2X5m , Bandage 3X10m , Bandage 3X5m , Bandage 4X10m , Bandage 4X5m , Bandage 6X10m , Bandage 6X5m , Bandage Cutting Si , Bandage Than 18Cmx100cm , Barbar Thared 100No , Barbar Thared 30No , Barbar Thared 40No , Barbar Thared 60No , Barbar Thared 80No , Barium Chloride 10% W/V 500 Ml , Barium Chloride450 Ml , Basic Fuchsin Powder 25 Grams , B-Complexinjection 10Ml , B-Complexinjection 3 Ml , B-Complexinjection 30Ml , B-Complexminerals With Zinc Cap , Bcomplex + Zinc + Ginsengcap. , B-Complex 100Ml Syp , B-Complex Tablet Nfi , Bed Pan Female S.S. With Cover , Bed Pan Female S.S. Without Cover , Bed Pan Male S.S. With Cover , Bed Sheet Single Bed(Coloured) , Bed Sheet Single Bed(White) , Bed Side Locker Deluxe S.S.Top , Bed Side Screen 4Fold With Green Curtain , Bed Side Screen Cloth , Bedsheet Double Bed(Coloured) , Bedsheet Double Bed(White) , Bendamustine(100Mg Vial),Injection , Benedict Solution 5000 Ml , Benedicts Reagent (Qualitative) 1000Ml , Benzathain Penicillininjection 12 Lac , Benzathain Penicillininjection 6 Lac , Benzoyl Peroxide Gel 5% 15Gm Tube , Betahistidine 16 Mg Tablet , Betahistidine 24 Mg Tablet , Betahistidine 8 Mg Tablet , Betamethasoneinjection 4Mg Ml 1 Ml , Betamethasone Dipropionate Ointment 0.05% 15 Gram Tube , Betamethasone Sodium Phosphate(Ml Contain Betamethasone Sodium Phosphate Equal To 4Mg Of Betamethasone (1Ml Amp)),Injection , Betamethasone Tab 0.5 Mg , Bicalutamide 50Mg Tablet , Bilirubin (Erba)4X50ml , Bilirubin (Liquistat) 2X100 Ml (Dmso Total & Direct Auto & Manual) , Bio Bags Large (Bio Hazard Bag) , Bio Bags Medium (Bio Hazard Bag) , Bio Bags Small(Bio Hazard Bag) , Bio Medical West Polythin 30 Kg. With Bio Hazard Symbol Mark (Red,Black,Yellow,Blue) , Bio Medical West Polythin 5 Kg. With Bio Hazard Symbol Mark (Red,Black,Yellow,Blue) , Bio Waste Trolly Sswith Three Color Buckets , Bioles Nitries Cylander , Bioles Oxygencylander , Biolyse (Detergent, Deodorant) - 35000Ml , Biomedical Disposable Waste Bag With Colour (Red, Black,Blue, Yellow ) Per Piece Size 01 Lt Per Polution Control Board Norm , Biomedical Disposable Waste Bag With Colour (Red, Black,Blue, Yellow ) Per Piece Size 20 Lt As Per Polution Control Board Norm , Biomedical Disposable Waste Bag With Colour (Red, Black,Blue, Yellow ) Per Piece Size 45 Lt Per Polution Control Board Norm , Biomedical Waste Collection Plastic Dustbinfoot Pedal Large (All Colours) , Biomedical Waste Collection Plastic Dustbinfoot Pedal Medium (All Colours) , Biomedical Waste Collection Plastic Dustbin Foot Pedal Small (All Colours) , Bipap , Bi-Phasic Defebrillator , Bisacodyl Suppositories 5 Mg , Bisacodyl Tab 5Mg , Black Phenyl 1Ltr , Black Phenyl 1Ltr Jar , Blade Handle S.S. 3No & 4No , Blancket For Neonates , Bleaching Powder Containing Not Less Than 30% W/W Of Available Chlorine(As Per I.P),Powder , Bleomycin(15 Units / Vial),Injection , Bloodadministration Set , Blood Bag(Disposable Sterilised) With Needle(100 Ml) , Blood Bag With (Disposable Sterilised) With Needle(350 Ml) , Blood Collection Vial 5 Mlper , Blood Culture Bottele With Browthper , Blood Grouping Regent Anti - A 10 Ml , Blood Grouping Regent Anti - B10 Ml , Blood Grouping Regent Anti - D 10 Ml , Blood Grouping Regent Anti Comboa+ B + D3x10ml , Blood Pressure Blader , Blood Pressure Bulb , Blood Transfusion Bag 100 Mlper , Blood Transfusion Bag 350 Mlper , Blood Transfusion Setper , Blood Weighing Machine Elecronic 500 Mlper , Bmw Poly Bags(1 Kg) , Bmw Poly Bags(18 Kg) , Bmw Poly Bags(28 Kg) , Bmw Poly Bags(45 Kg) , Bmw Poly Bags(5 Kg) , Bmw Small Box (Red, Yello, Blue) Capacity 2 Ltr. , Bob Cock Forcep 6 , Bob Cock Forcep 8 , Body Wipes , Boiler Approx 10 Ltr. , Boro-Spirit Ear Drops-(0.183 Gm Boric Acid In 2.08 Ml Of Alcohol 10 Ml Vial) Drop , Bortezomib(2Mg),Injection , Botropase Injection(Haemocoagulase 1Cu) 1Ml , Bougie All Size , Bowl Ss 100 Ml Capacity , Brimonidine Eye Drops , Bromhexin (4Mg ) + Salbutamol (2Mg) 60Ml Syp , Bromhexine 4Mg/5Ml 50Ml Bottle Syp , Room Broom Stick1x100 , Brown Glass Bottels500 Ml Size , Bucket Foot Oprated15 Ltr , Budesonide Nebulising Suspension Containing Budesonide(0.5 Mg/2Ml 2Ml Amp) Suspension , Bupivacaine Hcl For Spinal Anaesthesia 4Ml Amp Injection , Bupivacaine Hydrochloride 0.5% 20Ml Vial Injection , Bupivacaine Hydrochloride With Dextrose 5% Spinalinjection , C.R.P. Kit 100 Testper Kit , C.V.P. Manometer , Cabergoline Tab 0.5 Mg , Caffeine Citrate Inj. 20Mg/Ml 3Ml Vial Injection , Caffine Citrate Drop , Calamine Lotion 50 Ml Bottle , Calamine Lotion Ip (Contains Per 1000 Ml:- Calamine 150 Gm,Zinc Oxide 50 Gm, Bentonite 30 Gm, Sodium Citrate 5Gm, Liquified Phenol 5Ml, Glycerin 50 Ml Purified Waterfreshly Boiled And Cooled To Produced 1000Ml) 50 Ml Bottle(50 Ml Bottle),Bottle , Calcium 100Ml. Syp , Calcium 2X50 Ml , Calcium 75Mg + Phosphorus 58Mg + Vitamin C 25Mg + Niacinamide 15Mg + Vit A 6.4Mg + Vit E 5Mg + Magnesium 3Mg + Potassium 2Mg + Vit B1 1Mg + Vit B2 1Mg + Calcium Phosphorus 1Mg + Manganese 0.5Mg + Molybdenum 0.1Mg Iodine 0.075Mg + Vit D3 0.0025Mg + Folic Acid 50Mcg + Copper 45Mcg + Vit B12 0.5Mcg Cap. , Calcium Carbonate 500Mg Tablet . , Calcium Carbonate Vita. D3500 Mg Tablet . , Calcium Chloride Injection , Calcium Citrate Vita D3 Tablet , Calcium Dobesilate 15 Gm Oint . , Calcium Dobesilate Cap , Calcium Drpo 30Ml. , Calcium Gluconate Injection 10 Ml , Calcium Leucovorin 15Mg. Inj. , Calcium Leucovorin 50Mg. Inj. , Calcium Test 2*50 Mlper Kit , Calcium With Vitamin D Tablets Usp Calcium Carbonate 1.25G Eq. To Elemental(Calcium 500Mg And Cholecalciferol Ip 250 Iu) Tablet , Calibetter Cartridgeper , Calium With Vit D 3 Iu 100 Ml Syp , Calutide 50Mg. Tab. , Camer Wire All Size , Camra Cover , Canada Balsam (Cytology Mountant) 500Ml , Cannula Fixator , Capecitabine 500Mg Tablet , Capecitabine Tab 500 Mg , Capillary Tube , Capillary Tube For Bt/Ct1*100 , Capillary Tube Hepranised 75 Mmper Test , Carbamazepine Syp 100Mg/5Ml 100Ml Bottle , Carbamazepine Tab 200 Mg , Carbamazepine Tab 400 Mg , Carbimazole 10Mg Tablet , Carbol Fuchsin (Zn Strong) 500 Ml , Carbolic Acid 1000 Ml , Carboplatin 150Mg. Inj. , Carboplatin 450Mg. Inj. , Carboprost 250Mg Injection , Carboxy Methyl Cellulose Sodium Drops 1% Eye Drops 10 Ml , Carboxymethyl Hydroxyethyl Cellulose , Carboxymethylcellulose Sodium Eye Drop 0.5% 10Ml Eye Drop , Carmancannula , Carpinol (Sunway) Injection2 Ml , Cary & Blayer Mediaper Pack , Catheter Mount , Ccnu (Lomustine) 40Mg. Cap , Cedar Wood Oil 30 Ml30 Ml , Cedar Wood Oil 450 Ml450 Ml , Cefaodoxil 125Mg/30Ml Syp , Cefaodoxil 250Mg Tablet , Cefaodoxil 500Mg Tablet , Cefepime500mg Injection , Cefepime 1000Mg Injection , Cefepime 250Mg Injection , Cefixime 100Mg Dispersible Tablet , Cefixime 200Mg + Ofloxacin 200Mg Tab , Cefixime 200Mg Tablet , Cefixime 50Mg Dispersible Tablet , Cefixime Oral 100Mg/5Ml 30Ml Suspension , Cefixime Oral 10Ml Bottle Drop , Cefixime Oral 50Mg/5Ml 30Ml Suspension , Cefoparazone 1000Mg Injection , Cefoparazone 250Mg Injection , Cefotaxime Sod500mg Injection , Cefotaxime Sod 1000Mg Injection , Cefotaxime Sod 250Mg Injection , Cefozoline Sodium 250Mg Injection , Cefozoline Sodium 500Mg Injection , Cefozoline Sodium1gm Injection , Cefpodoxime 100Mg Tablet , Cefpodoxime 100Mg/5Ml 30Ml Syrup , Cefpodoxime 200Mg Tablet , Cefpodoxime 200Mg With Ofloxacin 200Mg Tablet , Cefpodoxime 50Mg Tablet , Cefpodoxime 50Mg/5Ml 30Ml Syrup , Ceftazidime 1000Mg Injection , Ceftazidime 250Mg Injection , Ceftazidime 500Mg Injection , Ceftriaxone 1000Mg + Sulbactam Sodium500mg Vial Injection , Ceftriaxone 1000Mg + Tazobactum 125Mg Vial Injection , Ceftriaxone 1000Mg Injection , Ceftriaxone 125Mg Injection , Ceftriaxone 250Mg + Sulbactam 125Mg Vial Injection , Ceftriaxone 250Mg Injection , Ceftriaxone 500Mg + Sulbactam 250Mg Vial Injection , Cefuroximeinjection 250Mg , Cefuroximeinjection 750Mg , Cefuroxime 250Mg Tablet , Cefuroxime 500Mg Tablet , Centreline Flowmeter , Centrifuge Machine 4*15 Ml Remi , Centrifuge Machine 6*15 Ml Remi , Centreline Flowmeter Connector , Cephalexin 250Mg Cap , Cephalexin 500Mg Cap , Cephalexin Dispersible 125Mg Tablet , Cephalexin Syp 125Mg/5Ml 30 Ml Bottle , Cervical Collar , Cetrimide Cream Solution 20% Concentrative For Dilution(0.2 Mg),Cream , Cetrimide+Chlorhexidine Conc. Solution 15% + 7.5% 1 Litre Bottle , Cetrizine 10Mg Tablet , Cetrizine 30Ml Syp , Chair Cushion Box Type , Chair Cushion Cover , Cheatal Forcep 10 , Chest Drain Catheterfg-16 , Chest Drainage Catheter All Size , Chikungunia Card Testper Test , Chinkungunia Card , Chittle Forcep Ss , Chittle Forcep Stand , Chloramphenicolinjection20ml , Chloramphenicol + Dexamethasone 10Ml Eye Drop , Chloramphenicol 10 Ml Eye Drop , Chloramphenicol 500Mg Cap , Chloramphenicol Eye Ointment 0.5% Ointment , Chloramphenicol Eye Ointment 1% 4G/5G Tube , Chlorhexadineacetate 0.5% White Soft Parafin Medicated Gauze 1X10 , Chlorhexidine Gluconate Mouthwash 0.2 % W/V Solution50ml Bottle , Chlorine 75Mg Tablet Isi Mark , Chlorocal H 1.5 Gm Eye Oint , Chloroquine Phosphateinjection 40Mg/Ml (5Ml Amp) , Chloroquine Phosphate Syp 160Mg /10Ml(50Mg/5Ml Base) 60Ml Bottle , Chloroquine Phosphate Tab 250 Mg , Chlorphenaramine Miltinjection 2Ml , Chlorphenaramine Miltinjection10ml , Chlorpheniramine Maleate 4Mg Tablet , Chlorpheniramine(Oral Liquid 2 Mg/5 Ml 30 Ml Bottel),Liquid , Chlorpromazineinjection 25Mg /Ml 2Ml , Chlorpromazine 100Mg Tablet , Chlorthalidone 12.5Mg Tablet , Chlorthalidone 25Mg Tablet , Chlorthalidone Tab 50Mg , Chlotrimazole 2%+ Metronidazole 10%45 Gm Oint . , Cholesterol(Erba)2X50ml , Cholesterol Total 250Ml (Wybenga Manual With Hdl Ppt Reagent) , Cinnargin 25 Mg Tablet , Cinnargin 50 Mg Tablet , Ciprofloxacin + Dexamethasone 5Ml Eye Drop , Ciprofloxacin 250Mg + Tinidazole 300Mg Tablet , Ciprofloxacin 250Mg Tablet , Ciprofloxacin 500Mg + Tinidazole 600Mg Tablet , Ciprofloxacin 500Mg Tablet , Ciprofloxacin Eye Drop , Ciprofloxacin Eye Ointment 0.3% 3/3.5 Gram Tube , Ciprofloxacin Inj 200 Mg/100Ml 100Ml Ffs Bottle Infusion , Cisplatin 10Mg. Inj. , Cisplatin 50Mg. Inj. , Ck Nac (Ifcc) 5X10 Ml , Clarithromycin 250Mg Tablet , Clindamycin Inj 150 Mg/ Ml 2 Ml Vial , Clindamycine 150 Mg Capsule , Clindamycine 300 Mg Capsule , Clinidipne 10Mg Tab. , Clobetasol Propionate Oint . , Clofazimine 100Mg Capsule , Clofazimine 50Mg Tablet , Clomiphene Citrate 50 Mg Tab , Clonazepam 0.5Mg Tablet , Clonazepam Injection , Clonidineinjection10ml Vial (1Mg ) , Clonidine 100 Mcgtablet , Clopidogrel + Aspirin 150Mg Cap , Clopidogrel + Aspirin 75Mg Cap , Clopidogrel 75Mg Tablet , Cloting Soap Small , Clotrimazole (Vaginal Tab) 100 Mg (With Applicator) Tab. , Clotrimazole (Vaginal Tab) 500 Mg (With Applicator) Tab. , Clotrimazole + Lignocaine Ear Drop 1% 5 Ml Vial , Clotrimoxazole 15Gm 1% Tube Oint . , Clotrimoxazole 15Gm 2% Tube Oint . , Cloxacillin(500Mg),Capsule , Cloxacillin(Capsule 125 Mg),Capsule , Clozapine(25 Mg),Tablet , Clozapine(50 Mg),Tablet , Cmc Eye Drop , Codan Set , Codeine(Oral Solution 15 Mg/5 Ml 60 Ml Bottle),Solution , Codon Filter Set , Cold/Hot Pack , Collodal Calcium With B-12Injection 15Ml , Colo Bag , Colore Meter 8 Filterper , Colostomy Kitadult , Colostomy Kitpaediatric , Combo Ear Drop(Chloramphenicol 5% W/V + Clotrimazole 1% + Lignocaine Hydrochloride 2%),Ear Drop , Compounder Coat/Lab Tec /Xry Tec Std Size , Compunder Dress (Male) , Copper Sulphate Powder500 Gm , Corbolic Acid500 Ml Bottle , Cord Clamp , Corneal Scissor , Corrugated Drainage Sheet , Cottan Thared , Cotton Bundel500 Gm , Cough Drop 15Ml , Counting Chamber , Coupling Jar 100 Ml , Cover Slip 18 X 18 Mm - 10Gm , Cover Slip200 Piece , Covid Self Testkit , Cpap , Cpap/Bipapmask Tubing , Cpap/Bipap Mask Airvent , Cpk-Mb Kit 1*10Mlper Kit , Cpm + Ammonium Chloride+ Sdodium Citrate+ Menthol 100Ml Syp , Cr System Film(Size 10X12) Care Streem , Cr System Film(Size 10X12) Fuji , Cr System Film(Size 14X17) Care Streem , Cr System Film(Size 14X17) Fuji , Cr System Film(Size 8X10 Care Streem , Cr System Film(Size 8X10 Fuji , Crash Cart , Creatinine (Erba)4X60ml , Creatinine Ep (Liquistat) 25 Test (Manual End Point Jaffs) , Creatinine Fk (Kinetic) (Liquistat) 2X50 Ml , Crep Bandage 2 , Crep Bandage 3 , Crep Bandage 4 , Crep Bandage 6 , Cresent Blade 2.2 , Cristaline Panicilline 10 Lac (Cp 10Lac) Inj. , Chromic Catgut 4 , Chromic Catgut 1 , Chromic Catgut 1-0 , Chromic Catgut 2 , Chromic Catgut 2-0 , Chromic Catgut 3 , Chromic Catgut 3-0 , Crp Test Kit (Latex Aglatrination)20 Test , Crp Test Kit Qualitative100 Test , Crp Turbilatex (Quantitative) 50Ml , Crystal Viaolet Stain Solu125 Ml , Crystal Viaolet Stain Solu500 Ml , Crystal Violet (Gention Violet) 500 Ml , Csf Diluting Fluid 100Ml , Csf Diluting Fluid125 Ml , Csf Diluting Fluid500 Ml , Csf Protein (Liquistat) 2 X 50Ml (Auto & Manual - For Urine Micro Proteins) , Culture Media (High Media) A1per Kit , Culture Plates {Brosill}Per , Curtain Green Redymade , Curton Cloth Rangeen , Cvc Double Lumen , Cvc Single Lumen , Cvc Triple Lumen , Cyclophosphamide Inj 500 Mg/Vial Vial , Cycloserine(Capsule 125 Mg),Capsule , Cynocobalamineinjection10ml (B-12) , Cynocobalamineinjection30ml (B-12) , Cyproheptadine 4 Mg Tablet , Cytochrom Kit With Buffer 2X (Modified Leishmans Stain)500Ml , Cytoheptadine 1.5 Mg Drop 15Ml , Cytology Collection Kit 50 Smears , D & C Sat , Dacarbazine (Dtic) 500Mg With Solvent Inj. , Dacarbazine(200 Mg Per Vial),Injection , De Colouriser For Hematoxylene (1% Hcl In A.A.) 500 Ml , Deferasirox Dispersible 250Mg Tablet , Deferasirox Dispersible 500Mg Tablet , Deferasirox Dispersible Tab 500 Mg , Deferiprone 500Mg Capsule , Dehydrated Media500 Gm , Deionised Water1 Ltr , Deionised Water5 Ltr , Delivery Kit , Dengue Combo Card , Dengue Igg/Igm Card , Dengue Ns1 Card , Dengue Test Cardper Card , Deriphylline (Sustained Release) Tablet , Desferrioxamine Injection 500Mg Vial , Dexamethasoneinjection4mg/Ml.10Ml , Dexamethasone Eye Drop(0.1%, 5Ml),Eye Drop , Dexamethasone Sodium Phosphate 8Mg/2Ml 2Ml Injection , Dexamthasone 0.5Mg Tablet , Dextran -40 + 0.9% Sodium Chloride Inj. , Dextran-40 + 5% Dextrose Inj. , Dextran-70 Injection , Dextromethorphan 10Mg/5Ml 100Ml Syrup , Dextromethorphan 10Mg/5Ml 60Ml Syrup , Diagnostic Kit For Iodine In Saltper , Dialater Sat 8Pcs. , Diapers Baby , Diazepaminjection5 Mg/2Ml , Diazepam 5Mg Tablet , Diclofenac + Methyl Salicylate + Menthol Ointment 10Gm Oint , Diclofenac 50Mg + Paracetamol 325Mg + Chlorzoxazone 250Mg Tablet , Diclofenac 50Mg + Paracetamol 325Mg + Serratiopeptidase 10Mg , Diclofenac 50Mg+ Paracetamol 500Mg Tablet , Diclofenac Potassium 50 Mg + Paracetamol 325 Mg + Cpm 4Mg +Magnasium Trisillicate 100Mg + Chlorpheniramine Meleate 4Mg Tab. , Diclofenac Sodium 25 Mg/Ml(3Ml Amp),Injection , Diclofenac Sodium 50Mg Tablet , Diclofenac With Menthol 30Gm Ointment , Diclofenac(1%),Gel 30Gm Ointment , Diclophenic Sodinjection 1Ml , Dicyclominedrop , Dicyclomineinjection 2Ml , Dicyclomine Hydrochloride 20Mg + Paracetamal 325Mg Tablet , Dicyclomine Hydrochloride 20Mg Tablet , Dicyclomine Hydrochloride Tab 10Mg , Diethycarbomazim 50Mg Tablet , Diethylcarbamazine Tab 100Mg , Diethylcarbamazine(Oral Liquid 120 Mg/5 Ml 100 Ml Bottel),Liquid , Digital B.P Cuff , Digital Hemoglobino Meter , Digital Thermometer , Digital Tourniquet , Digital Wall Clock , Digital Wrist Watch , Digital X Ray Film -10X12 , Digital X Ray Film -11X14 , Digital X Ray Film -14X17 , Digital X Ray Film -8X10 , Digoxin 0.25Mg Tablet , Digoxin Injection(0.5Mg /2Ml) 2Ml , Dilasis Cathator Double Lumen , Dilasis Cathator Triple Lumen , Dilitizem Injection , Diloxanide Furoate(Tablet 500 Mg),Tablet , Diltiazem Sr 90Mg Tablet , Diltizime 30Mg Tablet , Diltizime 60Mg Tablet , Diluent (Bc -300 Plus) For Cell Counter10 Ltr , Dionised Water 5 Ltr , Dipers Adult , Diphenhdramine Hcl 12.50 Mg + Ammonium Cloriede 125 Mg + Sodium Citrate 55 Mg Syrup 100Ml , Diphenhydramineinjection50 Mg /Ml , Diphenhydramine 12.5Mg/Ml. Syp , Diphenhydramine 25Mg. Cap , Diphenhydramine Sg Inj. , Diphenylhydantoin 100Mg Tablet , Diphenylhydantoin 30Mg Tablet , Diphtheria Antitoxin 10000 Iu 10 Ml Vial , Direct Hdl (Liquistat) 5X10 Ml , Direct Ldl (Liquistat) 5 X 10Ml , Disodium Hydrogen Citrate (Alkalizer) 100 Ml Syp , Disposable Adis Kit , Disposable Appron Pvc , Disposable Callys Pad , Disposable Cups For Urine Sputumper 100 , Disposable Esr Tube , Disposable Face Mask , Disposable Gown , Disposable Hme Filter , Disposable N95 Face Mask , Disposable Needle 22,23,24,26 , Disposable Non Wovanbed Sheet , Disposable Nursecap , Disposable Opration Kit , Disposable Paper Gloves , Disposable Plasticbed Sheet , Disposable Plastic Apron , Disposable Plastic Lancet , Disposable Ppe Kit , Disposable Pricking Lancet Needle200 Per Pack , Disposable Sharp Collection Containers 1.5 L , Disposable Sharp Collection Containers 5 Ltr , Disposable Shoe Cover , Disposable Sprit Swab , Disposable Sputum Cupper 100 , Disposable Sterile Gloves 6 , Disposable Sterile Gloves 6 1/2 , Disposable Sterile Gloves 7 , Disposable Sterile Gloves 7 1/2 , Disposable Surgeon Cap , Disposable Syringe 10Ml , Disposable Syringe 20Ml , Disposable Syringe 2Ml , Disposable Syringe 3Ml , Disposable Syringe 50Ml , Disposable Syringe 5Ml , Disposable Woodan Tongue Depressor , Distilled Water5000ml , Distilled Water 5 Ltr , Disulfiram 250Mg Tablet , Dobutamine 50Mg/Ml 5Ml Ampinjection , Dobutamine Inj 12.5 Mg/ Ml 20 Ml Vial , Docetaxel 120Mg. Inj. , Docetaxel 20Mg. Inj. , Docetaxel 80Mg. Inj. , Doctor Apron , Doctor Chair , Domperidone 10Mg Tablet , Domperidone 1Mg Per 1Ml Suspension 30 Ml Bottle , Donepezil 5Mg Tablet , Dopamine Hydrochlorideinjection40mg /Ml (5Ml Amp) , Doripenem Inj. , Double Oxalate Solution 100Ml , Double Stage Nitrogen Regulator , Double Stage Oxygen Regulator , Doxorubicin Lypholozed 10Mg Vial Injection , Doxorubicin Lypholozed 50Mg Vial Injection , Doxycyclin Hyclate 100Mg Cap , Doxycycline 100Mg Tablet , Doxycycline Dry 50Mg/5Ml Syrup , Doxylamine Succinate Tab 10 Mg , Dpx Mountant (Cytology Mountant) 500 Ml , Dr System Film(Size 10X12) Conica , Dr System Film(Size 14X17)Conica , Dr System Film(Size 8X10conica , Drabkins Solution With Standard (Ready To Used For Hb) 1000Ml , Dressing Forcep Plain & Toeth 10 , Dressing Forcep Plain & Toeth 5 , Dressing Forcep Plain & Toeth 6 , Dressing Forcep Plain & Toeth 8 , Dressing Pad 10*10 , Dressing Pad 10*20 , Dressing Scissor Straight & Curved 10 , Dressing Scissor Straight & Curved 5 , Dressing Scissor Straight & Curved 6 , Dressing Scissor Straight & Curved 8 , Dressing Trolley M.S , Dressing Trolley S.S , Droping Bottels500ml , Drotaverine Inj 40 Mg/2 Ml 2 Ml Amp , Drotaverine Tab 40 Mg , Dry Mop Big , Dual Testing Kit For Hiv And Syphilis Screening, Rapid Diagnostic Test Kit(Total No. Of Test 900000),Consumable , Dust Bin 10 Ltr. (Red,Black,Yellow,Blue) , Dust Bin 20 Ltr. (Red,Black,Yellow,Blue) , Dust Bin 40 Ltr. (Red,Black,Yellow,Blue) , Dust Bin, Foot Operated, Metal , Dydrogesterone 10 Mg Tab , Dylazer & Tubing Set For Adult , Dylazer & Tubing Set For Child , E.N.T Set , Easyfix Spray (Blood Smear Fixative) 50 Ml , Ecg 210 X 300 X 200 Sheets , Ecg Electrode , Ecg Gel 250Gm , Ecg Gelly 200 Ml , Ecg Machinesix Channel , Ecg Machinethreechannel , Ecg Machinetwelvechannel , Ecg Machine Battery , Ecg Machine Charger , Ecg Machine Single Channel , Ecg Roll50 X 20 Mtrs , Ecg Roll 106 X 20 Mtrs , Ecg Roll 210 X 20 Mtrs , Ecg Roll 215 X 20 Mtrs , Ecg Roll 60 X 15 Mtrs , Ecg Roll 80 Mm X 20 Mtrs , Edta 5% W/V 500Ml , Edta Disod Salt100 Gm , Edta K3 Concentrate 150Ml (Dropping Bottle) , Edta Powder500 Gm Pkt , Edta Solution 5%125 Ml , Edta Solution 5%500 Ml , Edta Tri Sod. Salt100 Gm , Elastic Adhesive Bandage 4 X 1Mtr , Elastic Adhesive Bandage 4 X 4/6Mtr , Elecrto Surgical Pencil , Elevated Calibrator (Liquistat) (With Multi Parameter Assigned Value) 5Ml , Elisa Reader And Washerper , Empagliflozin 25Mg Tablet , Enalapril Injection , Enalapril Maleate 10Mg Tablet , Enalapril Maleate 2.5Mg Tablet , Enalapril Maleate 5Mg Tablet , Endotracheal Tube Cuffed All Size , Endotracheal Tube Plain All Size , Endoxan (Cyclophosphamide) Inj. , Endoxan (Cyclophosphamide) Tab. , Enema Pot(Douche Sat) , Enoxaparin Inj 40 Mg Equivalent To- 4000 Iu Vial/Pfs , Enoxaparin Inj 60 Mg Equivalent To- 6000 Iu Vial/Pfs , Entravenec Fate Emlusion 20%Inj. , Enzyme With Vitaminsdrop 15Ml , Eosin 2% (For Hematoxylin Stain) 500 Ml , Eosine Solu 2% 125Ml125bottele , Eosine Yellow Powder100 Gm Btl , Eosine Yellow Powder25 Gm Btl , Eosinophil Diluting Fluid 100Ml , Epidural Cathator 16 , 18 , Epidural Kit16 , 18 , Epidural Needle Ng 16 , Epirubicin 10Mg. Inj. , Epirubicin 50Mg. Inj. , Epirubicin Inj 100 Mg /Vial Vial , Erba Wash4*50 Ml , Erithroprotine 10 K Inj. , Erithroprotine 2 K Inj. , Erithroprotine 4 K Inj. , Erlotinib 150Mg Tablet , Erlotinib(150 Mg),Tablet , Ertapenem Inj. , Erythromycine 250Mg Tablet , Erythromycine 500Mg Tablet , Erythropoetin 2000 Iu Injection , Erythropoietin10000iu Injection , Erythropoietin 2000 Iu/Ml Prefilled Syringe Of 1Ml Injection , Escitalopram 10Mg Tablet , Esmolol 100Mg/Vial(10Mg/Ml),Injection , Esr Pippete Western Green 12 Inchper , Esr Tube 4 Inchper , Esr Tube Stand Largeper , Esr Tube Stand Mediumper , Esr Tube Stand Smallper , Essence-Nebulizer (Home) , Ethamsylate 250Mg Tablet , Ethamsylate Injection 2Ml , Ethanol Consontate 99.99 2.5 Ltr. , Ethinylestradiol (A) + Levonorgestrel (B)(Tablet 0.03 Mg (A) + 0.15 Mg (B) Tablet , Ethinylestradiol + Norethisterone Tab 35 Mcg +1Mg 21 Tablets/Strip , Ethinylestradiol 0.01Mg Tablet , Ethinylestradiol 0.05Mg Tablet , Ethylealchohol ( Absolute ) 99%500 Ml Pack , Etiophylline And Theophylline 220Mg/2Ml Injection , Etophylline 231Mg + Theophylline 69Mg Sr Tablet , Etophylline 77Mg + Theophylline 23Mg Tablet , Etoposide 100Mg. Inj. , Ett Intubation Stylet , Examination Gloves , Examination Table Three Fold , Extention Duo , External Catheter Male Condom Cathator , Eye,Ear & Ulcer Syringe , Fire Extinguisher Co2 , Fire Extinguisher Abc Type , Famotidine 20Mg Tablet , Famotidine 40Mg Tablet , Feeding Bag , Feeding Tube Fg All Size , Fenofibrate 200Mg Tab. , Fentanyl Citrate 50 Microgram/Ml 2 Ml Amp , Fentanyl Citrate 50Mcg/Ml 2Ml Ampinj , Ferric Ammonium Citrate 110Mg + Folic Acid1.5Mg + Cyanocobalamin 15Mcg+ Sorbitol Solution Syrup 200Ml , Ferric Ammonium Citrate Ip 25Mg + Lysine Hydrochlorideusp 50 Mg. + Cyanocobalamin Ip 5Mcg. + Folic Acid Ip 200Mcgper Mldrop 15Ml , Ferric Ammoniun Citrate 200 Mg+ Folic Acid 0.5 Mg / 5Ml 200Ml Syp , Ferric Carboxymaltose 50Mg/Ml(20Ml Vial),Injection , Ferric Carboxymaltose Inj Equ.To Elemental Iron 500Mg/10Ml , Ferrous Ascorbate 100 Mg , Folic Acid 1.5 Mg ,Zink 22.5 ,D3 -200I.U.,Cynocobalamin 2 Mg , Ferrous Ascorbate 100Mg (Elemental Iron)+Folic Acid 1.5Mg(Tablet),Tablet , Fetal Doppler , Fetal Monitor , Field Stain - A 500 Ml , Field Stain - B 500 Ml , Field Stain A & B2 X 500Ml (Combined Kit With Easyfix Spray Fixative) , Filgrastim 300Mcg. Prefilled Syring Contains Inj. , Filter Paper12.5*100 Circle , Fingartippulse Oximeter , Finofibrate 160Mg Tablet , Finofibrate 40Mg Tablet , Fix Wakar , Flasksconical 2 Ltr , Flasksround Bottom 2 Ltr , Flatus Tube All Size , Flaxomatalic Endotracheal Tube All Size , Flouride Solution (Pot.Oxalate 5%, Flouride 1%) 500 Ml , Flow Cell Cleaner (Ready To Use) 500 Ml , Fluconazole 100Ml Inj. , Fluconazole 150Mg Tablet , Fluconazole 400Mg Tab. , Fluconazole(Eye Drop 3 Mg/Ml(10 Ml Vial),Eye Drop 5 Ml Eye Drop),Drop , Flumazenil Inj 0.1 Mg/ Ml 5 Ml Multiple Dose Vial , Flunarizine 5Mg Tablet , Fluoride Concentrate 150Ml (Dropping Bottle) , Fluoxetine 20Mg Capsule , Fluphenazine 1Ml 25Mg/Ml Injection , Fly Catcher Big , Folding Wakar , Foleron (Iron Iii) Hydroxide Polymaltose Complex Tablet , Foley Catheterpaed. 8 , 10 , Foley Catheter 2 Way , Foley Catheter 3 Way , Folic Acid 5Mg Tablet , Folic Acid Tab(400 Mcg),Tablet , Foot Stap Double , Foot Stap Single , Forcep Plan Pointed 4 , Formal Saline 5000Ml (For Histology Sample Preservation) , Formalin 450Ml , Formalin Chambers 21X 8X 8 Three Tray , Formalin Chambers 26X 8X 8 Three Tray , Formoterol 6Mcg + Budesonide 200Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps , Fortifield Procane Penicillineinjection 20 Lac , Fortifield Procane Penicillineinjection 4 Lac , Fouchet’S Reagent 150Ml , Fouchets Reagent125 Ml , Framycetin Sulphate 1% Cream 30Gm Tube Cream , Freeze Thermometer , Front Aprin , Frusemide 10Mg/Ml 2Ml Amp Injection , Fullyautomatic Biochemistry Analyzer Ce/Fda With 3 Year Warrenty , Fulvestrant 500Mg 10Ml Injection , Funel Glass45,60,90,125 Ml , Furazolidone 100Mg Tablet , Furazolidone 60Ml Syp , Furosemide 40Mg Tablet , Furosemide Drop , Fusidic Acid Cream/Sodium Fusidic Ointment 2% 5Gm 5Gm Tube , G 6 P.D. Test Kit10 Test , G6 Pd Deficiency Test Kitper , G-6Pdh (Quantitative, Uv) Kinetic 15 X 1.1Ml , G-6Pdh (Screening) 15 X 1Ml , Gamji Roll 4X3m. , Gamji Roll 6X3m. , Gamma Benzene Hexachloride Solution/Lotion 1% 100Ml Bottle , Gamma Gt (Ifcc Kinetic) (Liquistat) 2X50 Ml , Ganesh Pump Metal For Maleria , Gatifloxacin 5Ml Eye Drop , Gatifloxacine 200Mg Tablet , Gauze 18X90 Super Fine , Gauze Swab10cm X 10Cm , Gauze Swab 7.5Cm X 7.5Cm , Gefitinib(250Mg),Tablet , Geimsa Stain Kit 500Ml (With Buffer 10X & Easyfix Spray) , Gel Pack , Gemcitabine 1Gm. Inj. , Gemcitabine 200Mg. Inj. , Gemcitabine Inj 1.4 Gram/Vial Vial , Gentamicin + Hydrocortisone Ear Drop (0.3%+1%) 5 Ml Vial , Gentamicin 0.3% Eye/Ear Drops 5Ml , Gentamicin 40Mg/Ml 2Ml Amp Injection , Gentamycine Sulpfate 15Gmoint . , Giemsa Stain 125Mlper Pack , Giglisaw Handal , Giglisaw Wire , Glacial Acetic Acid (2.5 Liter) , Glass Slide , Glass Slide1x50 Slide , Glass Test Tube 12 X 100 (Medium Size) , Glass Test Tube 12 X 75 (Small Size) , Glibenclamide 5Mg Tablet , Gliclazide 80Mg Tab , Glimepiride 1Mg Tablet , Glimepiride 2Mg Tablet , Glipizide 5Mg Tablet , Glucometer Morephan / Acuchesck/Sdper , Glucometer Sd , Glucometer Strip Morephan / Acuchesck/Sdper , Glucose 5X60ml , Glucose (Enxymatic God-Pod)9*50 Ml , Glucose (God-Pod) 5 X100ml , Glucose Kit (Godpod) 9*50Mlper , Glucose Pouch 100Gm Powder , Glucose Pouch 75Gm Powder , Glycereen 15% Sod Chlor 15% Enema 20Ml , Glycerin 500Gm , Glycerin Oral Liquid 30Ml Bottel Liquid , Glycerine + Magsulph Crystal500 Gm , Glycerine Ip Solution 100 Ml Bottle , Glycerine500 Ml Bottle , Glycerol 100Ml , Glyceryl Trinitrateinjection5mg/Ml 5 Ml , Glyceryl Trinitrate Sub-Lingual Tab 0.5 Mg 10 Tab , Glycopyrolate 0.2Mg/Ml 1Ml Vial Injection , Gonio Meter Medium , Got (Ast) Kinetic (Liquistat)2X50 Ml , Gpt (Alt) Kinetic (Liquistat)1 X50ml , Gram Iodine125 Ml , Gram Stain4*100Ml , Gram’S Stain Kit (Ready To Use) 4 X 100Ml , Grams Iodine 500 Ml , Griesofulvin 125Mg Tablet , Group Sera Abd Kit3*10Ml , Guedel Airways All Size , Gum Paint (Tannic Acid)(2% W/V 15 Ml Bottle),Bottle , H2so4 25 % Solution 500 Ml , Haemocue Hb 301 Cuvette , Haemocytometerper , Haemoglobin Std (Cynmeth) 10Ml , Haloperidol 5Mg Tablet , Haloperidol 5Mg/Ml 1Ml Amp Injection , Haloperiodol 1.5Mg Tablet , Halothane 250Ml Inhalation , Halothane 50Ml Inhalation , Hamar With Brush , Hand Hold Pulse Oximeter , Hand Wash Liquid 500Ml With Dispensor , Hbsag Card Whole Blood Std. Qwality , Hbsag Kitper Card , Hbsag Rapid Card Test S Dper Test , Hbsag Strip , Hcg Card , Hcg Strip , Hcv Card , Hcv Rapid Card Testper Card , Hdl (Erba)2X50ml , Hdl- Cholestrol (Direct)80 Ml , Head Strap For Cpap/Bipap Mask , Heamoglobin Colour Scale Book With Strip , Heamoglobino Meter , Heamstrips (Occult Blood Strips) , Heamtest 200 Test (For Occult Blood With Positive & Negative Control) , Heavy Duty Pallet Racks , Height Scale With Stand , Hematoxylene (Harris) 500 Ml , Hemoglobin Meter Set Complete Indiaper , Hemoglobino Strips , Heparin Sodiuminjection 1000Iu/Ml 5Ml , Heparin Sodiuminjection 5000Iu/Ml 5Ml , Hepatitis B Immunoglobulin 100 Iu/Vial Vial , Herceptin 440Mg. Inj. , High Risk Wristred Band For Child , High Risk Wrist Red Band For Mothr , Hight Scale With Stand , Hiv Rapid Card Testper , Horizontol Sterlizer 10 Ltr Ss , Hub Cutter Needle Syring Cutter Ele. , Hub Cutter Needle Syring Cutter Non Ele. , Human Albumin Solution Ip I/V 20% W/V 100 Ml Ffs Bottle , Human Chorionic Gonadotropin(Injection 10000 Iu 1Ml Injection , Human Chorionic Gonadotropin(Injection 5000 Iu +2Mlinjection , Human Immunoglobin 5% Iv Ig((5Mg/100Ml Each),Injection 100Ml Injection),Injection , Humidifeder Bottal , Humidifier Clock 3 In 1 , Hyaluronidase , Hydrochloric Acid N/10 500 Ml , Hydrochloric Alcohol , Hydrochlorothiazid 12.5Mg Tablet , Hydrochlorothiazide 25Mg Tablet , Hydrochlorothiazide 50Mg Tablet , Hydrocloric Acid Concentrate 100% 500 Ml , Hydrocortisone 0.5% 15Gm Ointment Or Cream , Hydrocortisone 1% 15Gm Ointment Or Cream , Hydrocortisone Sodium Succinateinjection 200 Mg/Ml Vial , Hydrocortisone Sodium Succinate Injection400 Mg /Ml Vial , Hydrocortisone Sodium Succinate Injection 100 Mg /Ml Vial , Hydrogen Peroxide 400Ml , Hydrogen Peroxide 6% Solution (Who-Gmp Certification Exempted For This Item)(400 Ml ),Bottle , Hydroxy Ethyl Starch-200/3% Inj. , Hydroxy Progesterone Injection250mg 2Ml , Hydroxychloroquine 200Mg Tablet , Hydroxyethyl (6% Saline Solution For Infusion)(Starch 6%Ip 500 Ml Bottel),Infusion , Hydroxyethylstarch 6% Solution With Sodium Chloride 0.9% Iv Infusion I/V 500 Ml Ffs Bottle 0.90% , Hydroxyurea 500Mg Capsule , Hydroxyurea Dispersable 100Mg Tablet , Hydroxyzine 10Mg/5Ml Syrup,(100Ml Bottle),Syrup , Hydroxyzine 25Mg Tablet , Hygrometer , Hylace Injection 1Ml , Hyoscine Butylbromide 20Mg/Ml 1Ml Vial/Amp Injection , Hypersol 10Mleye Drop , Hypersoninjection 5Ml , Hypochloride Solu Conc.10 Ltr , I.V. (Electrolyte M) 500Ml Ffs Dextrose Anhydous 5Gm Kcl 150Mgnacl 100Mgna Acetate 280Mgna Meisulphite21 Mg Dibasic K Phosphate 130Mg/100Ml 500Ml Ffs , I.V. 10% Amino Acid + Electrolyte Inj. , I.V. Ciprofloxacine100ml Ffs , I.V. D.N.S.500 Ml Glass Bottle500ml , I.V. D.N.S.500 Ml Plastic Bottle500ml Ffs , I.V. Dextrose 5% Glass Bottle500ml , I.V. Dextrose 5% Plastic Bottle500ml Ffs , I.V. Dextrose10%Glass Bottle500ml , I.V. Dextrose10%Plastic Bottle500ml Ffs , I.V. Dextrose 25% 100Ml Ffs Bottle Injection , I.V. Dextrose 25% 25Ml Ffs , I.V. Dextrose 25% 500Ml Ffs Bottle Injection , I.V. Dextrose 50% 25 Ml Ffs , I.V. Electrolyte E I.V 500Ml Ffs/Bfs Bottle 500Ml Ffs. Dextrose 5Gsodium Acetate 0.64Gsodium Chloride 5Gpotassium Chloride 75Mgsodoium Citrate 75Mgcalcium Chloride Solution Correcting Water Electrolyte & Nutrition 52Mg Magnesium Chloride 31 Mg Tabletsodium Meta Bi Sulphate 20 Mg , I.V. Electrolyte P (Multi-Electrolytes And Dextrose Injection Type I Ip) I/V Fluid (Each 100Ml Contains: Anhydrous Dextrose 5Gm Potassium Chloride 0.13Gm, Sodium Acetate 0.32Gm, Dibasic Potassium Phosphate 0.026Gm)(500 Ml Ffs Bottle),Injection , I.V. Glycin 3000Ml. Inj. Bottle Plastic , I.V. Linozolidine Ffs , I.V. Mannitol 10% 100Ml Ffs , I.V. Normal Saline 0.9 % 100 Ml Glass Bottle , I.V. Normal Saline 0.9 % 100 Ml Plastic Bottleffs , I.V. Normal Saline 0.9 % 500 Ml Glass Bottle , I.V. Normal Saline 0.9 % 500 Ml Plastic Bottle Ffs , I.V. Ofloxacine 100 Ml Ffs , I.V. Ornidazole 100Ml Ffs , I.V. Ringer Lactate Plasticbottle 500 Ml Ffs , I.V. Set (Regular) , I.V. Tinidazole 400Ml Ffs , I.V.( Electrolyte ‘G’) 500Ml Ffs Dextrose Anhydrous 5 Gmkcl 130 Mgnacl 370 Mg Tabletammon Cl 370 Mg Na Sulphite 15 Mg /100Ml 500Mlffs , I.V.Stand , I.V.Stand With Whill , Ibuprofen400 Mg + Paracetamole 325 Tablet , Ibuprofen + Paracetamole Syrup , Ibuprofen 100Mg/5Ml 60Ml Syp , Ibuprofen 200Mg. Tab. , Ibuprofen 400Mg Tablet , Icthamol 100Gm , Icthamol Glycerin 100Gm , Icu Bed Deluxe , Identifiation Band , Idetification Tag Adult , Ifosfamide(1Gm),Injection , Imatinib Mesylate Cap 400 Mg , Imipromine 25Mg Tablet , Immersion Oil (Microscopy Grade) Dropping Bottle25ml , Incubator Pathology Useper , Indomethacine 25Mg Tablet , Infantometer , Infantometer , Infrared Digitalthermometer , Infusion Pump , Inj Strepto Mycine. 750 Gm Vial , Insline Nph Inj. , Insulin Soluble (Bovine + Porcine Or Porcine) 40Iu/Mlinjection10ml , Insulin Soluble Inj. 40Iu/Ml 10Ml , Insulin Syringe 100 Unit , Insulin Syringe 40 Unit , Insulins Human Mixtard30:70 Injection10ml , Intera Kit 18 ,20 ,22 , Intnsified Screen With Cassete 10*12Per , Intnsified Screen With Cassete 12*12Per , Intnsified Screen With Cassete 12*15Per , Intnsified Screen With Cassete 14*17Per , Intnsified Screen With Cassete 6.5*8.5Per , Intnsified Screen With Cassete 8*10Per , Intracath 26 , Intracath24 , Intracathg 18 , 20 ,22 , Intraperitoneal Dialysis Solution 0.015 1.5% 500Ml Solution , Intraperitoneal Dialysis Solution 0.025 2.5% 500Ml Solution , Intravenous Set With Airway And Needle , Intrvenous Immunoglobulin Inj. , Iol Foldable , Iol Non Foldable , Ipratropium Bromide 250 Mcg/Ml Respules Inhalation , Ipratropium Bromide Inhaler 20Mcg Per Puff(200 Metered Dose Container),Inhaler , Irinotecan Hydrochloride 100Mg Injection , Irinotecan(100 Mg Inj (1 Ml Amp)),Injection , Iris Scissor , Iron & Folic Acid Enteric Coated Blue (As Per Nipi Guidelines) 100 Mg + 0.5 Mg Tablet , Iron 100Ml Syp. , Iron 30Ml Drop , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Equ. To Ferrous Iron 100 Mg And Folic Acid 0.5 Mg (Blue Tablet) , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Ip Eq. To 45 Mg Elemental Iron And 400 Mcg Folic Acid Ip (Pink Color) - Wifs Junior , Iron And Folic Acid Enteric Coated Tab. Ferrous Sulphate Ip To Ferrous Iron 100 Mg & Folic Acid Ip 0.5 Mg Granules (Red Tablet) , Iron Ferras Sulphate Folic Acid 100Ml Syp , Iron Folic Acid Sugar Coated (Blue Tablet) Ferrous Sulphate Ip Equivalent To 60 Mg Elemental Iron & 500 Mcg Folic Acid Ip(60 Mg + 500 Mcg),Tablet , Iron Folic Acid Sugar Coated Tablet Dried Ferrous Sulphate Ip Eq. To 45Mg Ferrous Iron And 400Mcg Folic Acid Ip (Pink Coloured Tab) -Wifs Junior Ifa Tablets (Detail Specification As Per Tender)(45Mg + 400Mcg),Tablet , Iron Folic Acid Syrup, Each Ml Containing 20Mg Elemental Iron&100Mcgfolic Acid With Suitable Anti-Oxidant, Antimicrobial Agent And Food Grade Flavouring Agent.The Bottle Should Have 6 Fragmented Markings At Equal Intervals(If An Artificial Sweetening Is Used It Should Be Highlighted On The Label. Warning Should Be Put On Label Medication Should Be Kept Out Of Reach Of Children. (As Per Attached Specification) (50Ml Bottle With Auto Dispenser)),Syrup , Iron Polymaltoseinjection , Iron Rack Almirah 6X3 , Iron Racks , Iron Sucroseinjection 2.5Ml , Iron Sucroseinjection 5Ml , Iron Tibc (Ferrozin) 2X50 Ml , Isoflurane Inhalation , Isopropyle Alchohol 500Ml , Isosorbite Dinitra.10 Mg Tablet(Sub) {Sorbitrate} , Isosorbite Dinitra.5 Mg Tablet(Sub.) {Sorbitrate} , Isosorbite Mononitrate 20 Mg Tablet , Isoxsuprine 10Mg Tablet , Isoxsuprine Hcl Injection , Itraconazole Cap 100Mg , Itraconazole Cap 200Mg , Iui Cannula , Iv Paracetamol 100Ml Bottle , Iv Stand , Ivabradine 5Mg Tab. , Ivermectin 12Mg Tablet , Jaundice Meter , Jsb Stain500 Gm , K3 Blood Vaccutainer(Edta-100 Tubes/Pkt),Consumable [700465] , Kehr’S ‘T’ Tubefg All Size , Kellys Pad Disposable , Keratome2.8 Mm , Keratome3.2 Mm , Keratome5.1 Mm , Ketamine Hydrochlorideinjection 10Mg/10Ml In Each Vial , Ketone & Glucose Strips 100 , Ketorolac 10Mg Tablet , Ketorolac Eye Drop 0.5% 5Ml Drop , Kidney Tray S.S. 10 , Kidney Tray S.S. 12 , Kidney Tray S.S. 6 , Kidney Tray S.S. 8 , Kmc Thaali 5 Portion , Kmno 4(Pottasium Permagnate) 400 Gm , Kmno 4(Pottasium Permagnate)400 Gm , Knee Cap , Knife No 11 , Koh 10% Solu.500 Ml , Kwire All Size , L S Belt , Labetalol Inj 20 Mg/4Ml 4Ml Amp , Labetalol Tablet 100Mg. , Labour Table 2 Lighotomy Rod , Labour Tray Ss , Lactobacillus Tab 60 Million Spores , Lactulose 10Gm/15Ml 100Ml Bottle Syrup , Lakhani Sleeper 9 No. , Lancet Ss (Magnedorn Needle ) 75 Mm 200*6 Pktper , Lancetper 200 Pack , Lanse Tip , Lantanoprost Eye Drop 0.005% 5Ml Eye Drop , Laringoscop Adult 3 Blade , Laringoscop Adult 4 Blade , Laringoscop Bulb , Laringoscop Peidatric 2 Blade , Laryngeal Mask All Size , Laryngoscope , Ldh (Uv Kinetic) (Liquistat) 5X10 Ml , Led Torch , Lenalidomide 25Mg Capsule , Lens Paper/ Cleaning Paper50 Leaves , Lens Sleaning Solu.500 Ml , Lense Blade 2.1 Mm , Letrozole 2.5Mg Tablet , Levetiracetam 250 Mg Tablet , Levocetirizine + Monteleukast 2.5 Mg + 4Mg/5Ml 60Ml Suspension , Levocetirizine 5Mg + Montelukast 10Mg Tablet , Levocetirizine Dihydrochloride Ip 2.5Mg+ Ambroxol Hydrochloride Ip 30Mg Per 5Ml Syp. 60Ml , Levocetrizine Dihydrochloride 5Mg Tablet , Levodopa (A) + Carbidopa (B)(Tablet 100 Mg (A) + 10 Mg (B) Cr),Tablet , Levodopa (A) + Carbidopa (B)(Tablet 100 Mg (A) + 25 Mg (B) Cr),Tablet , Levodopa (A) + Carbidopa (B)(Tablet 250 Mg (A) + 25 Mg (B)),Tablet , Levofloxacin Inj 500 Mg/100 Ml 100 Ml Ffs Bottle , Levofloxacine250mg Tablet , Levofloxacoine 500Mg Tablet , Levonorgeastrelemergency Contraceptives0.75 Mg Tablet2 No , Levosalbutamol(50Mcg/Dose 30 Capsule In 6 Pack With 1 Dispecing Device),Capsule , Levosulbutamol(100 Mcg 30 Capsule In 6 Pack With 1 Dispecing Device),Capsule , Levothyroxine 100Mcg Tablet , Levothyroxine 50Mcg Tablet , Lignocain Spray , Lignocaine 2 % 21.3Mg/Ml 30Ml Injection , Lignocaine 2% + Adrenaline 5Mcg/Ml 30Mlinjection , Lignocaine 4%Injection30 Ml , Lignocaine Hydrochloride 2% 30Gm Tube Gel , Lignocaine Hydrochloride 4% Eye Drops 5Ml Vial , Lignocaine Hydrocloride And Dextorse Injection Hevy 5% Spinal 2 Ml Amp. , Linagliptin 5 Mg Tablet , Linezolid 600Mg Tablet , Lint Cloth 100 Gm , Lipase (Liquistat) 2X25 Ml , Liquid Hand Wash 500Ml , Liquid Paraffin 400Ml , Liquid Paraffin 500 Ml , Liquid Paraffin 50Ml , Lishmen Stain500 Ml , Lisinopril 5 Mg Tablet , Lithium Carbonate 300Mg Tablet , Loperamide(2Mg),Tablet , Lorazepam 1Mg Tablet , Lorazepam 2 Mg/Ml 2Ml Amp , Losartan 10Mg Tablet , Losartan Potassium 25Mg Tablet , Losartan Potassium 50Mg Tablet , Lotion Benzyl Benzoate 100 Ml 25% , Lotion Gama Benzyne Hexachloride 100Ml , Lquid Cresol With Soap Solu. 400Ml , Lugol’S Iodine 100 Ml , Luliconazole Cream 10Gm Ointment , Luliconazole Cream 20Gm Ointment , Luliconazole Cream 30Gm Ointment , Lycopen + Niacinamide + Pyridoxine H + C + Vitamins + Methylcobalamin200ml Syrup , Lycopene + Antioxidant + Multivitamine Cap. , Lycopene With Multivitamins + Multiminerals Cap , Lysol 5 Ltr. , Lysol 5 Ltr. Jar , M.V. Set 110Ml , M.V. Set 150Ml , M.V.A. Cannula All Size , M.V.A. Kit , M-30 Lyse500 Ml , Mabthera 100Mg. Inj. , Mabthera 500Mg. Inj. , Macanical Wight Machine Adult , Macanical Wight Machine Pedatric , Mackoniky Agr Media500 Grm Pakt , Magnesium (Calmagite) (Liquistat) 5X10 Ml , Magnesium Hydroxide+Aluminium Hydroxide Tablet 500Mg. + 250Mg. , Magnesium Sulphate 50 % 1Ml Amp Injection , Magnesium Sulphate 50 % 2Ml Amp Injection , Malaria Antigen Pf/Pv Card , Malicot Cathater All Size , Mannitol Inj. 20% 350Ml Ffs Bottle , Mannitol(20% 100 Ml Ffs Bottle),Injection , Manual Breast Pump , Masquitoforcep Straight & Curved 5 , Matarnity Pad , Mattress 5Kg Cotton 3 Ft X 6 Ft , Mayo Scissor 6 1/2 , Mayo Scissor 8 1/2 , Mayos Instument Trolley , Meassuring Cylinder10 Ml,50 Ml, 200 Ml , Mebendazole 100Mg Tablet , Mebendazole 30Ml Syp , Mebeverine 200Mg Tablet , Medroxy Progesterone Acetate(10 Mg),Tablet , Medroxyprogesterone Acetate(Injection 150 Mg 1 Ml / Vial),Injection , Mefenamic Acid 250Mg + Dicyclomine 10Mg Tablet , Mefenamic Acid 500 Mg+ Dicyclomine 10Mg Tablet , Mefloquine Tab 250 Mg , Menadione (Vit.K3) Injection10mg/Ml 2Ml , Mepafotic Eye Drop , Mephentermine Inj 30Mg/Ml(10 Ml Vial),Injection , Mercury Free Sphygmomanometer , Meropanam 1000Mg Inj. , Meropanam 125Mg Inj. , Meropanam 500Mg Inj. , Metaclopromide10ml Injection , Metaclopromide2ml Injection , Metaclopromide 10Mg Tablet , Metformin 500Mg + Glim. + Piog. Mp1 Tab. , Metformin 500Mg + Glim. + Piog. Mp2 Tab. , Metformin(1000Mg),Sr Tablet , Metformin(500 Mg),Tablet , Methanol / Methyl Alcohol500 Ml , Methanol / Methyl Alcohol500ml , Methanol Consontate 99.9 2.5 Ltr. , Methelene Blue25 Gm Btl , Methlyin Blue125 Ml , Methotraxate 2.5Mg. Tab. , Methotraxate 50Mg. Inj. , Methotrexate Tab 5 Mg , Methyl Ergometrin Injection 2Ml , Methyl Ergometrine Maleate0.125Mg Tablet , Methyl Sacicylate 100Gm Oint. , Methylated Spirit 500 Ml , Methylcobalmin 1500Mg Cap , Methyldopa 250Mg Tablet , Methylene Blue 100 Ml , Methylprednisolone125mg Injection , Methylprednisolone250mg Injection , Methylprednisolone40mg Injection , Methylprednisolone500mg Injection , Methylprednisolone 1000Mg Injection , Methylprednisolone 16Mg Tablet , Methylprednisolone 4Mg Tablet , Methylprednisolone 8Mg Tablet , Metoclopramide 10Mg Tab , Metoclopramide 5Mg/Ml 2 Ml Amp Injection , Metoprololinjection1mg /Ml , Metoprolol 25Mg Sustained Release Tablet , Metoprolol 25Mg Tab , Metoprolol 50Mg Sustained Release Tablet , Metoprolol 50Mg Tab , Metresses 3X6 With Raxine Cover 40 Density , Metronidazole 1% Ointment 15 Gram Tube , Metronidazole 200Mg Tablet , Metronidazole 400Mg Tablet , Metronidazole 500Mg/100 Ml(100 Ml Ffs Bottle),Injection , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension , Miconazole Ip Cream 2% W/W 15 Gram Tube , Micro Drip Set , Micro Pipette Stand 03 Tubeper , Micro Pipette Stand 06 Tubeper , Micro Protein (Pyrogallol Red) 5 X 10Ml , Micro Protein (Turbidometry) 2 X 25Ml , Microanatomy Spray Fixative 50Ml , Micronised Progestroninjection200mg1 Ml -2Ml , Micropipettes 10 To 100 Adjustable With Tipsper , Micropipettes 100 To 1000 Adjustable With Tipsper , Micropipettes 5 To 50 Adjustable With Tipsper , Micropiptte 0-100 Fix And Variable , Micropiptte 100-1000 Fix And Variable , Microscope Binocular Ce Certified Carlzesisper , Microscope Binocular Ce Certified Olympusper , Microscope Binocular Ce Certified Otherper , Microscope Minocular Ce Carlzesisper , Microscope Minocular Ce Certified Labometper , Microscope Minocular Ce Certified Olympusper , Microscope Minocular Ce Certified Otherper , Midazolam 1Mg/Ml 10Ml Injection , Midazolam 1Mg/Ml 5Ml Injection , Mifepristone 200Mg Tablet , Mifepristone-200Mg (1 Tab)+Misoprostol-200Mcg (4 Tab)(Combipack),Tablet , Milk Of Magnasia 11.25Ml Liquid Paraffin 3.75Ml/15Ml ( Creamafin Formula ) 170 Ml Syp , Mini Vac Set , Misoprostal200mcg Tablet , Mob , Monitor 2 Parameter , Montelukast 10Mg Tablet , Montelukast 5Mg Tablet , Morphine15mg/Ml 1Ml Injection , Morphine Sulphate 10Mg Tablet , Morphine Sulphate Inj. Ip 10Mg/Ml(1Ml Ampoule),Injection , Mother And Child Idetification Tag , Motorized Icu Bed , Mouthgag , Moxifloxacine 5Ml Eye Drop , Mucus Extractor , Multi Stic For Urine Parameter100 Strip Pck , Multipara Monitor 5 Parameter , Multivitamin 200Ml Syp. , Multivitamin Sugar Coated Tab Nfi Formula Multivitamin Sugar(Item With Additional Vitamin Will Also Be Considered),Tablet , Multivitamin With Protein 100Ml Syp , Multivitamin With Protein 200Ml Syp , Multivitamine Drop , Multivitamine With Zincdrop , Mupirocin 2% 5Gm Tube Ointment , Mupirocin Cream/Ointment 2% 15 Gram Tube , Myner Opration Tray , N/10 Hcl450 Ml , N-Acetyl Cysteine Inj 200 Mg/ Ml 1 Ml Amp , Nalidixic Acid 500Mg Tablet , Nalidixic Acid Susp 30Ml Syp , Naloxoneinjection 0.4Mg/Ml -1Ml Amp , Naloxone Injection 0.1Mg/Ml- 1Ml Amp , Napkin Sup. Quality Std Size(White) , Nasopharyngeal Airwayall Size , Natamycin Eye Drop , Natural Progesteron Injection 100Mg/2Ml , Nebulizer , Nebulizer Kit (Adult) , Nebulizer Kit (Child) , Nebulizer Machine , Needle Holder , Nelaton Cathetar All Size , Neomycin Sulfate 10Gm Oint . , Neonatal Laryngoscope , Neonatle / Infent Weighing Scale With Sling Weighing Machine / Scale , Neosporin H 5Gm Eye Oint , Neostigmineinjection 2.5Mg/Ml , Neostigmine 0.5Mg/Ml 1Ml Injection , Netimycin 250Mg. Inj. , Netlimycineinjection300 Mg , New Warce Chamberper , Nibp Cuff , Nicotinamide 15Mg + Thiamine Mononitrate (Vitamin B1) 1Mg+ Riboflavine (Vitamin B2) 1Mg + Pyridoxine Hcl (Vitamin B6) 0.5Mg + Cyanocobalamin (Vitamin B12) 1Mcg Tab. , Nicotinamide 50Mg Tablet , Nifedipine 10Mg Tablet , Nifedipine 5Mg Capsule , Nikethamideinjection 2Ml , Nitazoxanide 500Mg Tab. , Nitric Acid Conc.500 Ml , Nitril Powder Freeexaminationglovesalll Size , Nitroglycerine Inj. - 25 Mg/5Ml(5Ml),Ampule , Nitroglycerine(Glyceryl Trinitrate)(Sublingual Tab 0.5 Mg),Tablet , Non.Ster. Glovesall Size , Nondrolon Deconateinjection25 Mg , Nondrolon Deconateinjection50 Mg , Noraderanaline Bitartrate 2Mg/2Ml2ml Injection , Norfloxacin + Dexamethasone 10 Ml Eye Drop , Norfloxacin 100Mg Tablet , Norfloxacin 5Ml Eye Drop , Norfloxacine 400Mg + Tinidazole 600Mg Tablet , Norfloxacine 400Mg Tablet , Normal Delivery Set , Normal Saline(Nasal Drops: Sodium Chloride Drops 0.05% W/V 10 Ml Vial),Drop , Nutient Agr Media500 Grm Pck , Nutient Broth500 Ml , Nylon 1 , Nylon 2 , Nylon 2-0 , Nylon 3 , Nylon 3-0 , Nylon1-0 , O2 Mox Regulator , Office Almirah , Office Chair , Office Table , Ofloxacin 10 Mleye Drop , Ofloxacin 200Mg Tablet , Ofloxacin Eye Drops 0.3% W/V 5 Ml Vial , Ofloxacin Tab 400 Mg , Ofloxacine 200 + Ornidazole 500 Tablet , Ofloxacine Dexamethasone Eye Drop , Oil Emmersion Lense For Microscopeper , Olanzapine 10Mg Tablet , Olanzapine 5Mg Tablet , Olopotadine Antiallergic Eye Drop 0.1% 5 Ml Vial , Omeprazole 20Mg + Domperidone 10Mg Cap , Ondansetroninjection 2 Ml , Ondansetron 4 Mg Tablet , Ondansetron Syp 2Mg/5 Ml 30 Ml Bottle , Ondansetron Tab 2 Mg , Opthalmic Sol. Hydroxypropyl Methyl Cellulose 10Ml Nasal Drop , Opthalmoscope , Opticare - Microscope Lens Cleaner 150Ml , Ormeloxifene(Tablet 30 Mg 10X10),Tablet , Ornidazole 60Ml. Syp , Ors Who Powder Glucose Anhydrous 13.5G/L, Sodium Chloride 2.6G/L, Potassium Chloride 1.5G/L, Trisodium Citrate 2.9G/L(As Per Attached Pack Specification),Powder , Orthipadictourniquet With Belt Electric , Orthipadictourniquet With Belt Manual , Ortho Bandage 4X 10M , Ortho Bandage 6X 10M , Oseltamivir Ip 100Ml. Syp , Oseltamivir Ip 30Mg Cap , Oseltamivir Ip 45Mg Cap , Oseltamivir Ip 75Mg Cap , Over Bad Trolly Adjustable , Ovum Forcep 10 , Oxalic Acid 500 Gm , Oxaliplatin 100Mg. Inj. , Oxaliplatin 50Mg. Inj. , Oxygen Concentrator 10 Lpm , Oxygen Cyilnder Trolley Jambo , Oxygen Cyilnder Trolley Medium , Oxygen Cylander 20Cft , Oxygen Cylander 44Cft , Oxygen Cylander Jambo , Oxygen Cylander Key , Oxygen Flow Meter , Oxygen Gas(Oxygen Gas For Inhalation),Inhalation , Oxygen Hood (L)10X 8X 9 , Oxygen Hood (M)8X 7X 9 , Oxygen Hood (S) 6X6x6 , Oxygen Mask (Adult) , Oxygen Mask (Child) , Oxygen Nasal Cannula (Child) 2 Mtr , Oxytocin Inj(5 Iu/Ml (1Ml Amp)),Injection , Paclitaxel 100Mg. 260/3005 Inj. , Paclitaxel 260Mg(43.34Ml Vial),Injection , Paclitaxel 30Mg.Inj. , Pancuroniuminjection2mg/Ml , Pantoparazole 40Mg Injection , Pantoprazole 40Mg + Domperidone 10Mg Tablet , Pantoprazole 40Mg + Domperidone 30Mg Cap. , Pantoprazole 40Mg + Levosulpiride 75Mg Cap. , Pantoprazole 40Mg Tablet , Rapid Pap Smear Kit 250 Ml , Papanicolaou Ea -36 500 Ml , Papanicolaou Ea- 65 500 Ml , Papanicolaou Og - 6 500 Ml , Paper Tape 5Cm X 9Mtr , Paper Tape10cm X 9Mtr , Paper Tape 2.5Cm X 9Mtr , Paper Tape 7.5Cm X 9Mtr , Paracetamol + Phenylephrine Hydrochloride + Caffeine + Diphemhydramine Hcl Tab. , Paracetamol 125 Mg/5Ml 60Ml Bottle Suspension , Paracetamol 125 Mg/5Ml 60Ml Bottle Syrup , Paracetamol 125 Mg/Ml Drop , Paracetamol 150Mg/Ml 2Ml Amp Injection , Paracetamol 500Mg Tablet , Paracetamol 650Mg Tablet , Paracetamole 325 Mg + Mefenamic Acid 500Mg Tablet , Paraffin Strip Roll , Paraffin Wax 58°-60°C With Cerecin 1Kg , Parafin Film 4X250 , Pasture Pipat (Big Plastic Droper ) , Patient Body Wipes , Patient Dress Paint Shirt , Patient Gown , Pead. Urine Bag 100Ml , Pedes Reagent For Csf Analysis100 Ml , Pediatric B.P. Cuff , Pediatric Jacson Rees System , Pediatric Solution Like Isolyte(P N/2 And N/5),Solution , Pemetrexed(500Mg),Injection , Penicillin V Tab 125 Mg , Penicillin V Tab 250 Mg , Penicillin V(Phenoxymethyl Penicillin Potassium)(250 Mg),Tablet , Pentazocine Lactate(30Mg/Ml (1 Ml Amp)),Injection , Peprazine Citrate 30Ml Syp , Peritoneal Dialysiscatheter Set Adult , Peritoneal Dialysiscatheter Set Child , Permethrin Cream 5% 30Gm Tube , Permethrin Lotion 5% 60Ml Bottle Lotion , Peticote Blauge Cloth Shuti Rangeen , Ph Meter , Phacco Cassets Alhcon Loureate Machine , Pheniramine Maleate 22.75 Mg/Ml 2Ml Injection , Pheniramine Meleate 25Mg Tablet , Phenobarbitone 200 Mg/Ml Injection , Phenobarbitone 200Mg/5Ml Syp , Phenobarbitone 30Mg Tablet , Phenobarbitone 60Mg Tablet , Phenol Crystallin 500 Ml Pack , Phenytoin Sodium 100Mg Tablet , Phenytoin Sodium 50Mg/Ml 2Ml Amp Injection , Phenytoin Sodium Oral Suspension 25Mg/Ml 100 Ml Bottle , Phosphorus (End Point) New (Liquistat) 2 X 50Ml , Phototheraphy , Phototherepy Unit Single Surface Meditrin/Zeel , Phytomenadione Injection 10Mg/Ml Injection , Pillow Cover Cloth Bleach , Pillow With 2Kg Cotton , Pilocarpin Pfs Injection , Pilocarpine Eye Drops 2% 5Ml Vial , Pilocarpine Eye Drops 4% 5Ml Vial , Pioglitazone 15Mg Tablet , Piperacillin 1Gm + Tazobactam 125Mg Injection , Piperacillin 2Gm + Tazobactam 0.25Mg Injection , Piperacillin 4Gm + Tazobactam 0.5Gm Injection , Pipete 1 Mlper , Pipete 10 Mlper , Pipete 10.1 Ml Glassper , Pipete 2 Mlper , Pipete 5 Mlper , Pipete Valve Mlper , Pipette Bulb , Pipettes 0.20 Upper , Piroxicam 20Mg Cap. , Piroxicam Gel 30Gm Oint . , Plain Rubber Catater All Size , Plasma Derived Activated Prothrombin Complex Concentrate(500 Units/Vial),Injection , Plasma Derived Factor Viii 500 Iu / Anti Hemophillic Factor Viii 500 Iu(Vial),Vial , Plasma Derived Factor Viii(250Iu/Vial),Vial , Plaster Of Paris 410X2.7Mtr , Plaster Of Paris 6 15X 2.7Mtr , Plaster Of Paris Powder 1 Kg , Plastic Kidny Tray 8 , Plastic Kidny Tray 10 , Plastic Kidny Tray 12 , Plastic Sputom Cap , Plastic Urin Pot Male , Plastic Vialsper , Platelet Diluting Fluid 100 Ml , Platelet Diluting Fluid125 Ml , Plstic Bad Pan , Plstic Urin Pot Femail , Polyglactin 0 No. Round Body (12 Foils/Pkt) , Polyglactin 1 No. Round Body (12 Foils/Pkt) , Pomalidomide 2Mg Capsule , Portable Suction Machine , Portneb - Handheld Nebulizer , Post Mortem Sat , Potassium (Stpb) (Liquistat) 2X50 Ml , Potassium Chloride 150Mg/10Ml Injection , Potassium Chloride Oral Solution 100Mg/Ml 100Ml Bottle , Potassium Chloride Oral Solution 100Mg/Ml 200Ml Bottle , Pottacium Permagnate100 Gm , Povidine-Iodine Germicide(Gargle 20% W/V 100 Ml Bottel),Bottle , Povidine-Iodine(Gargle 2% W/V 100 Ml Bottel),Bottle , Povidone Iodine + Metronidazol 15Gm Ointment , Povidone Iodine Cream 125Gm Oint . , Povidone Iodine Cream 15 Mg Oint . , Povidone Iodine Cream 250Gm Oint . , Povidone Iodine Solution 5% 100Ml , Povidone Iodine Solution 5% 500Ml , Povidone Iodine Solution 7.5% 100Ml , Povidone Iodine Solution 7.5% 500Ml , Povidone Iodine Surgical Scrub 7.5% 500Ml Bottle , Povidone Iodine Vaginal 200Mg Pessary , Powder Acriflavin 20Gm , Powder Bleaching 25Kg , Powder Boric Acid 400Gm , Powder Cetrimide 100Gm , Powder Glucose 100 Gm , Powder Magnesium Sulphate 400Gm , Powder Mercurochrome 20Gm , Powder Nitrofurazone 20% 10Gm , Powder Of Buffer Water500 Ml , Powder Povidoine , Powder Sulfanilamide Dusting 400Gm , Powderd Examinationgloves All Size , Power Drool , Ppd Vials ( Mantaux ) 2 Tu , Ppd Vials ( Mantaux )2 Tu/ 5Tu , Pralidoxime (Pam)Injection25 Mg/Ml 20 Ml , Pralidoxime Chloride (2-Pam)Injection , Prazosin Tab 1Mg , Prednisolone 10Mg Tablet , Prednisolone 20Mg Tablet , Prednisolone(1% Eye Drop),Drop , Prednisolone(Drops 1% Eye 5 Ml Drop),Drop , Pregabalin 150Mg Cap. , Premix Insulin(30:70 Injection (Regular: Nph)2Vial Of 100Ml Injection , Prep Razor , Presaure Monitiring Line All Size , Pressure Monitering Kit , Prgenecy Test Card Per Card , Prgenecy Test Strip100 Strip Pck , Primaquin 15Mg Tablet , Primaquin 2.5 Mg Tablet , Primaquin 7.5 Mg Tablet , Procarbazine 50Mg. Cap. , Procto Scopes,M,L, , Proctocedyl Ointment30 Gm. Tube , Proline , Promethazine 25 Mg/Ml(2 Ml Amp),Injection , Promethazine 5 Mg/5Ml(60 Ml Bottle),Syrup , Promethazine Tab 25 Mg , Proparacaine Hydrochloride Eye Drop , Propofal 10Mg/Ml 10Ml Injection , Propofal 10Mg/Ml 20Ml Injection , Propranolol 10Mg Tablet , Propranolol 40Mg Tablet , Protamine 50Mg/5Ml 5Ml Vial Injection , Protein (Biuret) (Liquistat) 4 X 50Ml , Proteine Hydrolysate 1Gm + Choline Citrate 1Mg Pyridoxine Hcl 2Mg Cyanocobalamin 10 Mcg + Folic Acid 1Mg Per 15Ml Syp200ml , Protin Hydrolysate + Pyridoxin + Niacinamide + Iron Cholin Citrate + Magnesium Chloride + Maganese Chloride + Zinc Sulphate + Lysine , Protin Tonic Syrup 200Ml , Pyridoxine 100Mg Tablet , Pyridoxine 10Mg Tablet , Pyridoxine 40Mg Tablet , Quadripot Stik , Quinine Dihydrochloride 300Mg/Ml 2Ml Injection , Quinine Sulphate 300Mg Tablet , R.A. Factor Kit20 Test , R.A. Factor Test {Latex Agglution}100 Test , Rabeprazole 20Mg + Domperidone 30Mg Cap. , Rabeprazole 20Mg + Domperidone10mg Tablet , Rabeprazole 20Mg + Levosulpiride 75Mg Cap. , Rabeprazole 20Mg Tablet , Rabies Immunoglobinesinjection150iu , Rabies Immunoglobulin Inj-300 Iu((2Ml Vial Pfs)),Injection , Rabies Vaccine Human (Tissue Culture) Id/Im(Inj 2.5 Iu/ Ml 1 Vial With 1 Ml Diluents),Injection , Rabies Vaccine Human Injection. (Intra Dermal) , Radient Warmer Zeil/Meditrin( With 3 Year Free Repair Warranty) , Ramipril 2.5 Mg Tablet , Ramipril 5 Mg Tablet , Ranitidine 150Mg Tablet , Ranitidine 300 Mg Tablet , Ranitidine 50Mg/2Ml 2Ml Injection , Ranolazine 500Mg Tablet , Rapid Afb Stain Kit (Cold Method) 2 X 100Ml , Rapid Aso (Latex Slide Test) 50 Tests , Rapid Bile Pigment Reagent 25Ml , Rapid Crp (Latex Slide Test) 50 Tests , Rapid Fructose Kit (With Positive Control) 100 Ml , Rapid H & E Stain Kit 250 Smears (Only 03 Minute H & E Staining Kit) , Rapid Malaria Stain Kit (Jsb I & Ii)2 X500ml (One Minute Stain For Blood Parasite) , Rapid Mp Stain Kit 2 X 100Ml (One Minute Stain For Blood Parasite) , Rapid Ra (Latex Slide Test) 50 Tests , Rapid Test Card For Dangue 1Gg / 1Gmper Test , Rapid Widal (O, & H) Slide Test(2+2) X5 Ml , Rapid Widal (O, H, Ah, Bh) Slide Test 4 X 5Ml , Rapid-Pap Cytoplasm Stain - A 500 Ml , Rapid-Pap Cytoplasm Stain - B 500 Ml , Rapid-Pap Dehydrant 500 Ml , Rapid-Pap Nuclear Stain 500 Ml , Rapid-Pap Stain Kit 250 Smears (A3 Minute Pap Staining Kit) , Rbc Diluting Fluid 500 Ml , Rbc Diluting Fluid500 Ml , Re-Breathing Bag , Recombiant Fviia(1Mg/Vial),Vial , Recombinant Anti - Hemophilic Factor Viii(250 Iu Inj / Vial),Injection , Recombinant Anti - Hemophilic Factor Viii(500 Iu Inj / Vial),Injection , Recombinant F Ix(500Iu/Vial),Vial , Reduced Osmolarity Ors Pkt. Who Formula Sodium Chloride 2.5Mg Potessium Chloride 1.5Mgsodium Citrtr 2.09G Dextrose 13.6G 20.5Gm , Refrigerator 180 Ltr. , Respirometer , Reticulocyte Counting 25Ml , Reticview 125 Smears (With Counter Stain & Buffer) , Revolving Chair , Revolving Stool , Rf Turbilatex 50 Ml (Rheumtoid Factor) Quantitative , Ria Plain Vial Disposable , Riboflavin 5Mg Tablet , Right Angle Forcep 8 , Right Angle Forcep 9 1/2 , Risperidone 12.5Mg Injection , Risperidone 2Mg Tablet , Risperidone 50Mg 2Ml Injection , Rituximab 500Mg Injection , Romo Drain Bag , Romo Vac Set All Size , Room Spray 225 Ml , Room Thermo Meter Digital , Rosuvastatin 10Mg + Fenofibrate 145Mg Tablet , Rosuvastatin 10Mg Tablet , Rosuvastatin 20Mg Tablet , Rosuvastatin 5Mg Tablet , Round Bottam Flask 2000 Ml , Roxithromycin50mg Tablet , Roxithromycin 150Mg Tablet , Roxithromycine 30 Ml Syp , Rubber Bed Pan , Rubber Corrugated Drainage Sheet , Rubber Kellys Pad , Rubber Lung Excise Bag , Rubber Post Mortam Gloves All Size , Ruber Mac & Tose Sheetper Metre , Ryles Tube All Size , S.Amylase1*10 Ml , S.Cholestrol2*50 Ml , S.S Autoclove 12 X 12 , S.S. Bad Pan Female W/O Cover , S.S. Bad Pan Female With Cover , S.S. Bad Pan Male With Cover , S.S. Bowel 10Cm , S.S. Bowel 12Cm , S.S. Bowel 14Cm , S.S. Bowel 16Cm , S.S. Bowel 20Cm , S.S. Fumigater5liters , S.S. Urinal Female , S.S. Urinal Male , S.S.Autoclove 12 X 20 , S.S.Catheter Tray 17 X 6 X 4 , S.S.Catheter Tray 8 X 5 X 3 , S.S.Dressing Drums (Jointed)6X6 , S.S.Dressing Drums (Jointed)9X9 , S.S.Dressing Drums (Jointed) 11X 9 , S.S.Dressing Drums (Jointed) 12X10 , S.S.Dressing Drums (Jointed) 15X12 , S.S.Fogar , S.S.Kidney Tray 10 , S.S.Kidney Tray 12 , S.S.Kidney Tray 6 , S.S.Kidney Tray 8 , S.S.Sterilizer 10 X 5 X 3 , S.S.Sterilizer 14 X 6 X 4 , S.S.Sterilizer 16 X 6 X 4 , S.S.Sterilizer 18 X 8 X 6 , S.S.Sterilizer 20 X 8 X 6 , S.S.Tray W/O Cover New Born Baby , S.S.Tray With Cover 10 X 8 , S.S.Tray With Cover 12 X8 , S.S.Tray With Cover 12X 10 , S.S.Tray With Cover 14 X10 , S.S.Tray With Cover 15 X 12 , S.S.Tray With Cover 18 X12 , S.S.Tray With Cover 8 X6 , S.S.Tray With Cover 9 X6 , S.Triglyceride -Des5*20 Ml , Safranine 0.5% W/V (Grams) 500 Ml , Salbutamol 2Mg Tablet , Salbutamol 4Mg Tablet , Salbutamol Inhalation Ip 100Mcg/Dose(200 Metered Dose Container),Inhaler , Salbutamol Sulphate (2Mg/5Ml 60Ml)(60Ml Bottle),Syrup , Sales Diluting Fluid125 Ml , Sales Tube Hb%Per , Salicylic Acid 2% Ointment 30 Gram Tube , Salicylic Acid 6 % Ointment 30 Gram Tube , Sanatry Napkeen , Sanitary Napkins , Sanitizer 100Ml , Sanitizer 500Ml , Sargramostin Inj 500 Mcg/ Ml Vial Vial , Scalp Vein Set All Size , Scissor Cutical 4 , Scott’S Tap Water Substitute 100 Ml , Semen Diluting Fluid 100 Ml , Semi Automatic Biochemistry Analyzer Ce/Fda With 3 Year Warrenty , Sensorcaneinjection0.5% 20Ml , Seratiopaptidase 10Mg Tablet , Seratiopaptidase 5Mg Tablet , Serum Albumin {Bcg Dye Method}100 Ml , Serum Bilurabin Test Kit2*50Ml , Serum Calcium2*125 Ml , Serum Creatinine 2*125Ml , Serum Critinine Test Kit100ml , Serum Porotien {Biyret Method}5*50 Ml , Sgot (Erba)5X6.5Ml , Sgot (Manual Dnph) 30 Tests , Sgot Test Kit100ml , Sgpt (Erba)5X6.5Ml , Sgpt (Manual Dnph) 30 Tests , Sgpt Test Kit100ml , Shoe Rack 5 Selve , Silicon Ambubag Adult , Silicon Ambubag Neonatal , Silicon Ambubag Peidiatric , Silicon Bain Circuit Adult , Silicon Bain Circuit Peadiatric , Silicon Foley Catheter 2 Way , Silicon Mask All Size , Silicon Ventouse Cup With Release Valve , Silk 1 , Silk 2 , Silk 2-0 , Silk 3 , Silk 3-0 , Silk Thared , Silk1-0 , Silver Sulphadiazine Cream 1% 25Gm Tube , Simple Camood Chair , Simple Camood Stool , Sims Uterine Depressor / Retractorper , Single Stage Nitrogen Regulator , Single Stage Oxygen Regulator , Single Walking Stik , Sister U + Mama U , Sitagliptin 100Mg Tablet , Sitagliptin(50 Mg),Tablet , Skin Grafting Blade , Skin Grafting Blade Handle , Skin Marker Pan , Slicka Gel , Slicka Gel20 Gm Pkt , Slide Box 50 Slideper Box , Slide Boxes 100 Capacity , Slide Holder , Slide Markersper , Slide Rack , Slide Stainning Stand Wire Loop Metal , Slit Lamp With Motorised Stand , Smear Transporting Box Plasticper , Smear Transporting Box Woodenper , Sod / Pot / Chlo (Liquistat)( U. Acetate / Stpb / Thiocynate ) 3 X100ml , Sodium (Phosphonazo Iii) New (Liquistat) 2 X 50Ml , Sodium Aminosalicylate Granules(10 Gm Bottel Of 100 Gm),Powder , Sodium Bicarbonate Inj. - 7.5% W/V(10Ml),Ampoule , Sodium Chloride N/2 Injection Ip (0.45%)(500Ml Ffs Bottle),Injection , Sodium Citrate 3.2% W/V 100 Ml , Sodium Citrate 3.8% W/V 500 Ml , Sodium Citrate Solu. 3.8 %1000 Ml , Sodium Citrate Solu. 3.8 %500 Ml , Sodium Hypochlorite 5000Ml , Sodium Oxide Powder500 Gm , Sodium Picosulfate Tablet , Sodium Picosulphate Syp , Sodium Thiopentone - 0.5 Gm Powder/Vial(20Ml Vial),Injection , Sodium Valproate Oral Solution 200Mg/5Ml 100 Ml Bottle , Sodium Valproate(200Mg),Tablet , Sodium Valproate(500 Mg),Tablet , Soframycine 1.5Gm Eye Ointtube , Solid Linen Trolley , Solution Chloroxylenol4.8%W/V Terpineol 9%V/V Alcohol Absolute 13.1%V/V ( Detol Formula} , Sorafenib(200Mg),Tablet , Sphygmomanometer Dimond Led Type , Spinal Needleall Size , Spirit Lamp , Spirit Lampper , Spironolactone(25Mg),Tablet , Sponge Holder , Sponge Holding Forcep 10 , Sponge Holding Forcep 8 , Spoon 5 Ml , Spoon For Baby , Spot Lamp , Spritflammable 500 Ml , Sprit Lamp , Sputum Cup With Sticker 30Ml , Sputum Cup With Sticker 50Ml , Stadiometer , Staining Bag Per , Staining Stand ( Rectangel Shaped Made With Metal Wire) , Steel Dibbi 50 Ml , Ster. Surgical Glovesall Size , Sterile Blade With Handle All Size , Sterile Cotton Wool Swabsper 100 Pck , Sterile Leak Proof Container 100 Mlper , Sterile Sugar Glucose Engymaticper Kit , Sterile Test Tubesper , Stethoscope Adult , Stethoscope Pediatric , Stracher Meter , Streptokinaseinjection15 Lac Unit , Streptokinaseinjection750000 Lakh , Stretchre On Trolley , Streture Ss , Stumach Wash Tube , Suture Needle 1/2 Circle Cutting (12 Foils/Pkt) , Suture Needle R.B. 1/2 Circle(12 Foils/Pkt) , Suture Needle Straight (12 Foils/Pkt) , Succinyl Choline(50Mg/Ml (10 Ml Vial)),Injection , Sucralfate (20 Mg Tablet 10 X 10),Tablet , Sucralfate(1Gm/5Ml),Syrup Or Suspension , Suction Catheter Plain All Size , Suction Catheter Thamb Cantrolall Size , Suction Handal , Suction Machine Double Bottle , Suction Set , Suction Tube (Roll Of 10 Mtr) , Sulfacetamide Eye Drops - 20% 10 Ml Vial , Sulfadimidine 500Mg Tablet , Sulfamethoxazole +Trimethoprim Suspension (200 Mg + 40 Mg) / 5 Ml Suspension(50 Ml Bottle),Suspension , Sulfamethoxazole 100Mg+Trimethoprim20 Mg Tablet , Sulfamethoxazole 200Mg+Trimethoprim40 Mg Tablet , Sulfamethoxazole 400Mg+Trimethoprim80 Mg Tablet , Sulfamethoxazole 800Mg+Trimethoprim160mg Tablet , Sulfasalazine(500 Mg),Tablet , Sulphosalicyclic Acid Conc450 Ml , Sulphosalicyclic Acid125 Ml , Sulphosalicyclic Acid250 Ml , Sulphosalicylic Acid 3% W/V 500 Ml , Sulphosalicylic Acid 30 % W/V 500 Ml , Sulphuric Acid 20% V/V 500 Ml , Sulphuric Acid Conc. 500 Ml , Sulphuric Acid Conc.5 Lit Pack , Sumatriptan(25Mg),Tablet , Supra Cath All Size , Surface Disinfactant 500 Ml , Surfactant Suspension(Inj 25 Mg/Ml),Injection , Surgical Bladeall Size , Surgical Spirit 100 Ml Bottle , Surgical Spirit 500 Ml Bottle , Surgical Sprit 100 Ml , Surgical Sprit 500 Ml. , Suspension For Intratracheal Instillation(80Mg/Ml (Pack Size As Licensed)),Suspension , Suture Stitch Cutting Scissor Teeth , Synthetic Disposable Aprin Lab Coat , Syphilis Card , Syphilis Strip , Syring (For Mantoux) , Syring (For Mantoux)0.1 Ml/Insulin , Syringe Pump , T3tsh Kit96 Test , Table Cloth Rangeen , Table Top Centrifuge 4 Tube Remiper , Table Top Centrifuge 6 Tube Remiper , Table Top Centrifuge 8 Tube Remiper , Tamoxifen 10Mg. Tab. , Tamoxifen 20Mg. Tab. , Tamsulosin 0.4Mg. Tab. , Tape Roll , Tapentadol 100Mg Tablet , Tds Meter , Telmisartan 20Mg Tablet , Telmisartan 40Mg + Amlodephin 5Mg Tablet , Telmisartan 40Mg + Hydrochlorothiazide 12.5Mg Tab , Telmisartan 40Mg + Metoprolol Succinate (Er) Tab , Telmisartan 40Mg Tablet , Telmisartan 80Mg Tablet , Temozolimide 100Mg. Cap. , Temozolimide 20Mg. Cap. , Temozolimide 250Mg. Cap. , Temsulusin 0.4Mg + Dutasteride 0.5Mg , Teneligliptin 20Mg & Metformin Hydrochloride (Er) 500Mg Tab , Teneligliptin 20Mg & Metformin Hydrochloride (Sr) 1000Mg Tab , Teneligliptin 20Mg Tab. , Terbutaline Suplhateinjection 0.5Mg/Ml 1 Ml , Terbutanil Sulphate 1.5Mg + Bromhexine 4Mg + Guaiphensin 50Mg 100Ml Syp , Tericot Sharee , Test Tubebrush , Test Tube 10 Ml Glassper , Test Tube 10 Mlper , Test Tube 3 Inch Glassper , Test Tube Rack Largeper , Test Tube Rack Mediumper , Test Tube Stand 12 Holeper , Test Tube Stand 24 Holeper , Test Tube Stand 36 Holeper , Test Tube Tack Smallper , Test Tube With Rack (12 Tube)Per , Tetanus Immunoglobulin(Usp/Ip 250 Iu/Vial),Injection , Tetanus Toxideinjection 0.5Ml , Tetanus Toxideinjection 5Ml , Therm0meter Digital , Therm0meter Ovel , Therm0meter Round , Thermacol Box , Thermalcol Box 8X6 , Thermometer Rectal , Thiamine Hydrochloride 2.25 Mg + Riboflavine 2.5Mg + Pyridoxine Hydrochloride 0.75Mg +Cyanocobalamin 2.5Mg + Nicotinamide 30Mg + D-Panthenol 2.5Mg Flavoured Syrup200ml , Thiamine(Injection 100 Mg/Ml 1 Ml/Vial),Injection , Thiopentoneinjection 1Gm , Thomas Splint All Size , Three Fold Labor Table With Foam Matress , Three Seater Waiting Chair Ss , Three Way Cannula All Size , Three Way Ext. Tube All Size , Three Way Stop Cock , Thyroxine Sodium. 100Mcg Tablet , Thyroxine Sodium. 50 Mcg Tablet , Timer , Timolol Maleate Eye Drop 0.5 % 5Ml Vial Solution , Tincture Benzoin 450Ml , Tincture Iodine 450Ml , Tinidazole 300Mg Tablet , Tinidazole 500Mg Tablet , Tinidazole Susp. 150Mg/5Ml 60 Ml Bottle , Tiotropium 18Mcg(30Cap. X 6 Pack With 1 Dispensing Device),Rotacaps , Tiotropium 9Mcg 180 Doses Inhaler(180 Or More Doses Acceptable),Inhaler , Tips For Auto Pipettes 2 To 100 Micro Litres , Tips For Auto Pipettes 200 To 1000 Micro Litres , Tips For Auto Pippetes 10 To 100 Micro Litres , Tissue Paper Roll , Tissue Paper Roll(Each),Consumable , Tizanidine 2Mg Tablet , Tizanidine 4Mg Tablet , Tmp Agr Media500 Gm Pkt , Tmp Per , Tobramycin 10Ml Eye Drop , Toilet Cleaner 500 Ml , Toomy Syringe , Tooth Forcep Ss , Topotecan(Inj 4 Mg 4 Ml Vial),Injection , Torasemideinjection100mg/2Ml , Torch Test Kit1*96 Test , Torch With 2 Cells , Torniquit Belt , Torsemide 10Mg Tablet , Torsemide 20Mg Tablet , Total Albumine 100Ml , Total Protein & Albumin 2 X100ml (Biuret & Bcg ) (Liquistat) , Total Protein (Erba)5X50ml , Total Protein100ml , Tourniquet Belt , Towel Clip , Tracheostomy Filtor , Tracheostomy Tube (Cuffed) All Size , Tracheostomy Tube (Plain) All Size , Tramadol100mg Tablet , Tramadol50mg Tablet , Tramadol Injection 100Mg/Ml 2 Ml , Tramadol Injection 50Mg/Ml 2Ml , Tranamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet , Tranexamic Acid 100Mg/Ml Injection 5Ml Amp , Tranexamide Acid 500 Mg Tablet , Transport Medium (Cary Blair) 200 Gmper , Transport Medium (Cary Blair) 400 Gmper , Trastuzumab 440 Mg Injection(Vial),Injection , Trastuzumab 440 Mg Injection(Vial),Injection , Tri Pot Stik , Trial Lens Sets With Trial Frames , Triangular Bandage 90Cm X 90Cm , Triglyceride (Erba)2X50ml , Triglyceride Kit 5*65 Mlper , Triglycerides (Enz. End Point) (Liquistat) 2X50 Ml (Enz. End Point) (Liquistat) , Trihexyphenidyl Tab 2 Mg , Trocar Catheterall Size , Tropicacl Phenylephrine Hydrochloride Eye Drop , Tropicacyl Plus 5 Ml Eye Drop , Tropicamide(1% 5Ml Vial),Eye Drop , Tropicasyl Plus (Ophth) 10Ml Eye Drop , Troponin Card , Tur Set , Turpentine Liniment 400Ml , Turpentine Oil (Repacking License Is Also Eligible)(50Ml Bottle),Bottle , Turpentine Oil 400Ml , Twin Bucket Wth Trolly , Twinikit Beltper , Typhoid Test Card(An Immunochromatography Assay For The Rapid Visual Detection Of Typhoid Antibody Igg/Igm In Human Serum/Plasma)(50 Test Per Pack),Consumable [987739] , U.S.G. Printing Rollper Roll , Ultrasonic Nebulizer , Ultrasound Gel 250Gm , Ultrasound Gel 5Kg , Under Pad Sheet , Universal Cleaner 10 Ltrs. (Compatible With All 3 Parts 18-23 Parameter Hematology Counter) , Universal Diluent 10 Ltrs. (Compatible With All 3 Parts 18-23 Parameter Hematology Counter) , Universal Wash 100Ml (Compatible With All 3 Parts 18-23 Parameter Hematology Counter) , Urea (Erba)5X20ml , Urea (Gldh) (Liquistat) 5 X 10Ml , Urea (Ned) (Liquistat) 4 X 50Ml , Urea Berthlot Test Kit400 Ml , Urea Dam (With Extended Linearity) Reagent 1 X 100Ml , Urea H. P. (Berthelot) 100 Ml , Urea Kit Ned Dye 2*125 , Urethral Catheter K90 , K91 , Uri Stic For Albumin / Sugar100 Strip Pack , Uric Acid (End Point) (Liquistat) 4 X 50 Ml , Uric Acid {Uri Case Pod Method}50Ml , Uric Acid5x20ml , Urine Albumine/Sugar Strip , Urine Bile Pigment Kit 250 Test , Urine Collecting Bag , Urine Collecting Bag Leg Bag Set , Urine Container 25 Ml Plasticper 100 , Urine Pregnancy Test Card , Uristic Detection For Protein In Urine 100 Strip Pack , Urokinase Inj 5 Lac Iu/Vial Vial , Urometer Adult , Ursodeoxycholic Acid Bp 150Mg Tab. , Ursodeoxycholic Acid Bp 300Mg Tab. , Usg Papers Glosy , Usg Papers Non Glosy , Vacutainer C Test Tubeper , Valethamate Bromide ( Epidosin ) Injection , Vancomycin Hydrochloride(1000Mg Vial),Injection , Vancomycin Hydrochloride(250Mg Vial),Injection , Vancomycin Hydrochloride(500Mg),Injection , Vannor Scissors , Vaporiser , Vdrl Test Card Rapidper Test , Vecuronium Bromide Inj 2Mg/Ml (2Ml Amp) , Vein Finder , Velcade 1 Mg./2Ml (Only 1/2)Inj. , Velcade 3.5 Mg. Inj. , Ventilator Circuit Double Water Trap , Ventilator Circuit Plain , Ventilator Circuit Single Water Trap , Verapamil(40 Mg Ip),Tablet , Verapamil(Injection 5 Mg/2 Ml 2 Ml Vial),Injection , Vicril 2 , Vicril1-0 , Vicril2-0 , Vicril3 , Vicril3-0 , Vicril 1 , Video Colposcope , Vildagliptin 50 + Metformin 1000 Mg , Vildagliptin 50 + Metformin 500 Mg , Vildagliptin 50Mg Tab , Vinblastine 10Mg. Inj. , Vincristine Sulphate(1Mg/Ml (Cytocristin Inj) 1 Ml Vial),Injection , Vinorelbine(10 Mg),Injection , Visitor Stool , Vitamin A Ip 2500 Iu + Vit B1 1Mg + Vit B2 1.5Mg+ Vit B6 1Mg + Vit B12 1Mcg + Vitamin C 50Mg+ Vit E 5Mg + Vit E 5Mg + Niacinamide 15Mg + Folic Acid Ip 0.15Mg Elemental Calcium Ip 75Mg + Phosphorus 58Mg+ Ferrous Fumarate Ip 30Mg + Zinc Sulphate Ip 10Mg +Magnesium Sulphate Ip 0.50Mg + Coppersulphate Usp 0.50Mg + Potassium Iodide Ip 0.01Mg + Ginseng Usp 42.50Mg Cap. (With Mono Cartan) , Vitamin A Syrup(100000 Iu/Ml With Market Spoon For 1Ml And 2 Ml (100 Ml Bottle)),Syrup Or Solution , Vitamin B1(Thiamine 100 Mg),Tablet , Vitamin B12 Inj 500 Mcg/Ml(30 Ml Amp/Vial),Injection , Vitamin C(100 Mg),Tablet , Vitamin Kinjection(10Mg /Ml) 1 Ml , Vitamin K1(1Mg/0.5Ml (0.5 Ml Amp)),Injection , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet , Viwe Box Double Film , Viwe Box Singal Film , Voglibose 0.2 Mg Tablet , Voglibose 0.3 Mg Tablet , Voglibose Ip 0.2 Mg + Metformin Hydrochloride Ip 500 Mg Tablet , Voglibose Ip 0.3 Mg + Metformin Hydrochloride Ip 500 Mg Tablet , Vortex Mixer Machine , Ward Bad Deluxe , Ward Bad Fowler , Ward Bad Genral , Ward Bad Samifowler , Warfarin 1Mg Tablet , Warfarin Sodium(5 Mg),Tablet , Warfarint 2Mg Tablet , Warm Sleeping Bag For Neonates , Warmer Probe , Wash Basin Stand Double , Wash Basin Stand Single , Wash Bottel , Wash Bottel500 Ml , Washing Powder Kg , Water Bad , Water Bath Medium Size , Water Bed , Water For Injection 10 Ml Amp , Water For Injection 2 Ml Amp , Water For Injection 5 Ml Amp , Water Wath (Pathology Use)Per , Water Wipes , Wathing Soap , Wax Solvent Ear Drops: Benzocaine 2.7% 10 Ml Bottel Drop , Wax Solvent Ear Drops:Paradichlorobenzene 2% 10Ml Botte Drop , Wbc Diluting Fluid 500 Ml , Wbc Diluting Fluid500 Ml , Weighing Machine Adult Electronic , Weighing Machine Adult Manual (Libra/Kohinoor) , Weighing Machine Infant Electronic , Weighing Machine Infant Manual , Weight Mop Big , Wheel Chair , White Phenyle1 Ltr , Who Hemoglobin Color Scale (Starter Kit) Components (1) Colour Scale 01/Kit (2)Test Strip 1000/Kit (3) Printed Literature For Method Of Use/Kit (4)Lancet-1000/Kit 10X100(Nabl/Cap Accrediated Lab Test Certificate For The Batch No. Must Be Enclosed With Each Supply Delivered),Consumable [Mis145] , Widal Test Kit , Widal Test Kit (O-H)2*2*5Per Kit , Widal Test Kit4*5Ml , Wight Machine Digitaladult , Wight Machine Pedatric Digital Modle , Wiper Standard Size , Wright’S Stain With Buffer 2X100 Ml (Gold Standard) , X Ray Casettedigital10x 12 For Fuzi Make Machine 150 Sheet , X Ray Casettedigital11x 14 For Fuzi Make Machine 150 Sheet , X Ray Casettedigital14x 17 For Fuzi Make Machine 100 Sheet , X Ray Casettedigital8x 10 For Fuzi Make Machine 150 Sheet , X Ray Fixure22.5 Ltr , X Ray Tablecomplete , X-Ray Casette 10X12 , X-Ray Casette 12X15 , X-Ray Casette 6.5X8.5 , X-Ray Casette 8X10 , X-Ray Chest Stand Floor Mounted , X-Ray Chest Stand Wall Mounted , X-Ray Dark Room Safe Light , X-Ray Developer 13.5Ltr , X-Ray Developer 22.5Ltr , X-Ray Developer 9Ltr , X-Ray Developing Tank 22.5Ltr , X-Ray Developing Tank 9Ltr , X-Ray Film 10X12 Packet Of 50 Sheet , X-Ray Film 12X12 Packet Of 50 Sheet , X-Ray Film 12X15 Packet Of 50 Sheet , Xray Film 14*17Per Pkt , X-Ray Film 6.5X8.5 Packet Of 50 Sheet , X-Ray Film 8X10 Packet Of 50 Sheet , X-Ray Film Digital 10X12 Packet Of 150 Sheet , X-Ray Film Digital 11X14 Packet Of 150 Sheet , X-Ray Film Digital 14X17 Packet Of 150 Sheet , X-Ray Film Digital 8X10 Packet Of 150 Sheet , X-Ray Film Drying Rack For 12 Film , X-Ray Fixer13.5 Ltr , X-Ray Fixer13.5 Ltrtank , X-Ray Fixer 22.5Ltr , X-Ray Fixer 9 Ltr , X-Ray Hanger S.S. 10X12 , X-Ray Hanger S.S. 12X15 , X-Ray Hanger S.S. 6.5X8.5 , X-Ray Hanger S.S. 8X10 , X-Ray Lad Aprine , X-Ray Lad Lets , X-Ray Lad Number , X-Ray Lead Appron , X-Ray Lead Gloves , X-Ray Lead Letter 0-9 , X-Ray Lead Letter A-Z , X-Ray Lead Partition With Lead Glass , X-Ray Machine 100 Ma Digital Complete Set Portabel , X-Ray Machine 100 Ma Manual Complete Set , X-Ray Machine 300 Ma Digital Complete Set , X-Ray Machine 300 Ma Manual Complete Set , X-Ray Machine 60 Ma Digital Complete Set , X-Ray Machine 60 Ma Manual Complete Set , X-Ray Screen Kiran H.S. 10X12 , X-Ray Screen Kiran H.S. 12X15 , X-Ray Screen Kiran H.S. 6.5X8.5 , X-Ray Screen Kiran H.S. 8X10 , X-Ray Screen Kiran Kg 4 10X12 , X-Ray Screen Kiran Kg 4 12X15 , X-Ray Screen Kiran Kg 4 6.5X8.5 , X-Ray Screen Kiran Kg 4 8X10 , X-Ray View Box Med. Two Tubelight , Size 24X24 , X-Ray View Box Med. Two Tubelight , Size 36X24 , Xylometazoline 0.05% Nasal 10Ml(0.05% 10Ml),Drop , Xylometazoline Nasal 0.1% 10Ml Vial Drop , Zeil Neelsen Acid Fast Stain 120 Mlper , Zeil Neelsen Acid Fast Stain 450 Mlper , Zig Zag Cottan 500Gm , Zinc Sulphate Dispersible 10Mg Tablet , Zinc Sulphate Dispersible 20Mg Tablet , Zinc Sulphate Syrup 100Ml , Zinc Sulphate Syrup 50Ml , Zine Sulfate Monohydrate 20Mg + Thiamine Mononitrate 10Mg + Riboflavine 10Mg + Pyridoxine 3Mg +Cyanocobalamin 5Mcg + Nicotinamide 50Mg + Calcium Pantothenate 12.5Mg + Folic Acid 1000Mcg + Magnesium Sulfate Monohydrate 10Mgcap. , Zip Polythin Bags Medium Size , Zipper Polybag , Zoledronic Acid(4Mg Vial),Injection , Air Freshner , Toilet Brush , Wet Mop With Pole , Dry Mop Lock , Wet Mop Lock , Check Duster , Scotch Bright , Floor Duster , Joona Iron , Napthalene Ball , Acid Bottle 1 Ltr. , Dust Pan , Yellow Pole Big , Giemsa Stain 500 Ml Bottle , Capaliry Tube , Hand Wash Liquid 5L , Lysol 500Ml
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Madhya Pradesh View Result →
34.
Housing Urban and Rular Development #9342103 Technical Bid
Construction And Installation Of Various Items For Government Buildings, In The State Of Goa To Create Barrier- Free Environment For Persons With Disabilities (South Goa).-SS Studs with carborundum insert of approved colour Providing and fixing SS-304 studs of the approved brand and make, having 35mm dia. and 5mm thickness and a 12 mm long cylindrical plug of 7mm dia. at the centre of the rear side of the stud and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 2 SS Strips with carborundum insert of approved colour Providing and fixing SS-304 strips of the approved brand and make, of size 280mm x 35mm and 5mm thickness and having minimum 3 nos. 12 mm long cylindrical plugs having 7mm dia. located on the rear side of the strip and the plug to have a notch for adhesive retention. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete. 3 PU Warning Tiles :Providing and fixing in place 300 mm x 300 mm polyurethane stick on tactilewarning tiles with provision for screwing at corenrs with matching colour screw cap , having beveled edges and tactile elements protruding by 5mm from the base of the tile. The tiles should be of the approved brand, make and colour and be fixed inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and as per the installation instructionsgiven by the manufacturer complete 4 PU Directional tiles Polyurethane stripsof Barrierfree/ equivalent brand of size 300 mm x 300 mm and 5mm thickness with proision for screwing at 4 corners with matching colour cap. To be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using Bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner)/proprietary self adhesive tape including finishing work up to the satisfaction of the engineer in charge complete. 5 Providing a S.S. 304 SWING GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm, of the approved brand and make and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 6 ProvidingS.S. 304 L SHAPED GRAB BAR of SIZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness 1.5mm, of the approved brand and make andto be installed at the specified location as per accessibility standards and to be fixed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware as per the direction of the engineer in charge 7 Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm, of the approved brand and make, to be installed vertically at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge 8 Parking Signage Design, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the Universal Accessibility Symbol and Upper case Sans Serif words ofheight 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm.Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge. 9 Building entrance and Accessible entrance signage Design, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the Universal Accessibility Symbol and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 10 Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuildinglayout of size 2ft x 1.5ft min., of the approved design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of height not less than 12mm, with the equivalent word/s written in Hindi with acrylic cut out Devnagri letters of height not less than 12mm,raised 1 to 2mm above base plate and of the approved colour such that there is adequate visual contrast with the base plate. A multilingual audio indicating the names of the relevant spaces to be triggered on pressing the respective button. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. 11 Overhanging directional signage Design, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 12 Overhanging directional signage Design, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge 13 Floor Directories with tactile letters Providing and fixing acrylic multilingual Braille (raised domes) floor directories on all floors of size 1.5 ft x 2 ft , showing the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having Base plate: 4mm thick blue/ approved colour acrylic non glare Text: Upper Case San Serif words made of white acrylic non glare cut out letters of height 20mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 20mm raised 0.8mm above base plate. Symbols: Signage to have relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Arrows: Signage to have arrows pointing in the relevant direction made of cut out acrylic and raised by 3mm min. above base plate Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Braille: Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 14 Emergency Evacuation signage (6 x 9 format) Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6x 9 emergency exits and evacuation instructions, designed as per the drawings issued and having 4mm thick green/red acrylic non glare base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height not less than 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height not less than 15mm raised 0.8mm above base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 15 FIRE ORDER Design, supply, fabrication and fixingmultilingual FIRE ORDER signage of size 700mm x 900mm made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet. Signage giving evacuation instructions during fire using black/ red/ green non glareUpper Case Sans Serif words of height not less than 15mm and the equivalent translation written in Hindi using Devnagri non glare black letters of height not less than 15mm , designed as per the drawings issued. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 16 Emergency evacuation map:photoluminiscent Providing and installing an Emergency evacuation map of each floor indicating the current position of the viewer saying YOU ARE HERE of 15mm high letters in red/ green /black with white background, indicating the emergency exits, locations of fire extinguishers etc.Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters not less than 3/4 in height. The size of the board shall be 2ft x 2ft made out of Ecosolvent self adhesive,reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet, complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand shall be oriented to the position of the viewer up to the satisfaction of the engineer in charge. 17 Photoluminescent Fire exit and floor identification signage with Braille: PHOTOLUMINISCENT Fire Exit and floor identification signage of size 400 x 100mm min. made out of computer cut opaque, non reflective, self adhesive vinyle letters, pasted on a self adhesive photoluminiscent film, pasted on 3mm thick PVC foam sheet, having a 2mm acrylic baseplate. Braille strip comprising of Acrylic base plate and PVC rasters to be provide below the signage. Signage to be of the approved colour with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand up to the satisfaction of the engineer in charge. 18 Anodised Aluminium Braille indicators with SS-304 cable fasteners for handrails Providing and fixing 0.5 mm thick Anodised Aluminiumpre rolled signs of size 100mm x 80mm to fit any handrail circumference with hygeinically clean pressed aluminium with no add ons that can be picked off or removed and having the required word written in Grade 1 Braille (raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI) raised by 0.6mm to 0.9mm above base plate. To be installed in place around the handrail using SS-304 cable ties of dimension 7.9mm x 200mm with press fit mechanism. 19 Providing a folding wheelchair of the approved brand and make having chrome steel finish, fixed arm and footrest, solid castor front wheel of 8 dia and rear pneumatic mag wheel of 24 dia, self weight of 17.4 kg and load bearing capacity of 150 kg . Seat width of 16 and overall wheelchair width 24 and 25mm pipe dia. 20 Providing a emergency evacuation chair of approved brand ( Resguardo or equivalent )with a self weight of 16.5 kg and load bearing capacity of 130 kg. The frame of the chair to be made of aluminium powder coated sections of 32 mm outer dis and 3 mm thickness. 21 Door signage : 6 x 3 format (without symbols, without text, only Braille) Design, supply, fabrication and fixing acrylicBraille (raised domes) signboards of size 6x 3 for room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate. Grade 1 Braille consisting of PVC rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. 22 Conducting post implementation access audit and submission of post implementation report certified by Access Auditor empanelled under Accessible India Campaign by Ministry of Social Justice and Empowerment, Govt. Of India . The Post implementation access audit report shall comply with the report format under AIC and demonstrate the measures adopted for accessibily of the building which has been retrofitted through sufficient photographic evidences as deemed necessary. 23 Providing and Fixing in position in custom sizes accessible railing system as per design mandated under accessibility norms, fabricated out of modular and non modular components made of Stainless Steel Grade 304. Railing system to be fabricated out of SS pipe of 38 to 50 mm dia for horizontal supports of 16 gauge thickness at two levels of 760 mm and 900 mm with adequte vertical and horizontal supports for stability and safety of persons with disabilities. 24 Modular Unisex Accessible Toilet : Providing and installing in position a prefabricated modular unisex accessible toilet unit of size 2200 x 2100 mm as per accessibility norms fabricated out of SS, GI framing and panelling surfaces along with ACP exterior surafce as per manufacturers specifications inclding all service lines for water supply and drainage. ech Specifications for Prefabricated Accessible Toilet in India 1. Structure: Frame: GI (Galvanized Iron), powder-coated for durability, 2mm thickness.Cladding: ACP (Aluminum Composite Panel), 3mm thickness, weather-resistant, available in matte, glossy, or wood finishes. 2. Flooring: Anti-slip vinyl or rubber flooring (3mm thickness), water-resistant, slip-resistant, and easy to clean. 3. Roof: ACP or insulated roofing panels, weather-resistant, soundproof, and thermal-insulated. 4. Doors & Windows: Doors: Minimum 900mm width for wheelchair accessibility. Windows: Frosted glass for privacy, small, strategically placed. 5. Accessibility Features: Interior Layout: 1500mm turning radius, wheelchair-friendly. Grab Bars: Stainless steel or powder-coated at appropriate heights. Toilet Seat: Accessible height (450-480mm) with side armrests. Shower Area (Optional): Foldable seat, handheld shower. 25 6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light. 26 7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures. Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m). 27 8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance. 28 9. Sustainability: Eco-friendly, recyclable materials. Energy-efficient features (LED lights, water-saving fixtures). Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors. 29 Providing and installing on all floors a building an audio navigational and wayfinding system of Disha / Iwayplus brand or equivalent based on BLE Beacons and custom app for use on smart phones, integrated with QR codes in designated locations enabled with AR/VR technology as per manufacturers specifications.Cost to include generation of CAD files for as built layouts of all structures. 30 Accessible Modular Ramp : Providing and installing on designatedlocation as per the directions of Engineer In Charge a customised modular ramp of gradient 1:12 gradient 1. Structure: Frame & Support: Fabricated from stainless steel for corrosion resistance and durability, ensuring rust-free performance. Surface: Aluminum components for lightweight, strength, and resistance to corrosion. Design: Modular design for easy installation and adjustments, ensuring flexibility in various environments. 2. Ramp Dimensions: Slope: Compliance with accessibility norms – a maximum slope ratio of 1:12 (1 part rise to 12 parts horizontal run). Width: Minimum 900mm to accommodate wheelchairs and mobility devices. Height: Customizable based on the locations requirements (e.g., 1000mm to 1500mm rise). Clearance: A minimum of 150mm clearance at the lowest point. 31 3. Safety Features: Handrails: Stainless steel handrails on both sides, 900mm to 1100mm in height, providing support and stability. Edge Protection: Raised edges (50mm-75mm) on both sides to prevent accidental slipping. Surface Texture: Anti-slip surface treatment on the ramp and handrails for added grip in wet conditions. 32 4. Weather Protection: Cover: A weatherproof cover (e.g., PVC or UV-resistant fabric) to protect the ramp from rain, ensuring its longevity and usability in all weather conditions. Drainage: Integrated drainage system or slotted surface to prevent water pooling. 33 5. Materials & Finish: Material: High-quality stainless steel for the frame, aluminum for surface components. Finish: Powder-coated or brushed stainless steel for a modern aesthetic and added corrosion resistance. Durability: All materials are rust-resistant, ensuring long-term functionality, even in coastal or humid areas. 34 6. Ventilation & Lighting: Exhaust fan or louvered windows for ventilation. LED lighting, energy-efficient with diffused light. 35 7. Plumbing & Electrical: Plumbing: PVC, water-efficient fixtures. Electrical: Waterproof outlets and fixtures, placed at accessible height (1.2m). 36 8. Durability & Maintenance: Corrosion-resistant materials (GI, ACP), easy to clean, low maintenance. 37 9. Sustainability: Eco-friendly, recyclable materials. Energy-efficient features (LED lights, water-saving fixtures). Optional Additions: Solar panels, rainwater harvesting, automated doors, and smart sensors 38 roviding a Accessible Help desk manufactured in adherence to accessibility norms made out of 18 mm ply and all surafces finished with solid surface of Corian or equivalent material with all edges rounded and or champfered to avoid sharp edge hazard to any person with disability ( Visual impairment, blood disorders) as per standrad drawing issued by access consultant 39 Supplying a Stair Climber Wheelchair as per manufacturers specifications and accessibility norms Type of stair climbing / descending : Battery operated Movement on flat ground : self operated by manual push as well as attendant Net weight /gross weight : 40kg / 51kg Required turning radius on staircase : 40×40 inches / 1×1 meter Battery voltage : 24 V Stair climber motor : 120 W Power motor : n/a Max load : 125kg Optimum stair angle : 35 deg Motor out put voltage : 20-29.4 V Battery charging voltage :110-240 V
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Goa View Result →
35.
Defence #9306464 Technical Bid
Procurement Of Mt Spares , Tata Spares Part : , Clutch Releaser Brg , Assy Clutch Release Brg With Sleev , Oil Seal , Sliding Sleeve , Tapper Roller Bearing (Rear Hub Outer) , Tapper Roller Bearing (Rear Hub Outer) , Taper Roller Bearing Outer ( 70X 125 X33.250 ) , Taper Roller Bearing , Taper Roller Brg , Synchronising Ring With Sleeve 5Th Speed , Synchronising Ring (5Th Speed Gear) , Helical Gear 2Nd Speed , Helical Gear 4Th Speed , Steering Pump , Vane Pump , Clutch Release Bearing , Clutch Release Brg , Oil Seal (To Hubs Inner) , Coller Bushing 47.2 Mm Long , Shifting Sleeve , Rear Axle Shaft , Mainshaft , Hekicalgear3rd Speed , Rear Hub Greasing Kit , Synchronsing Sleeve4th And 5Th Speed , Element Air Cleaner(Primary)Sfc 410 Fltg , G/Box Housing Cover Frt Top , Synchronising Body 4Th And 5Th , Reverse Gear On Main Shaft , Counter Shaft , Gear Rear , Element Air Cleaner(Safety) , Assy Ball Joint Rh Thd , Assy Universal Joint (For Zf P/Strg) , Head Lub Oil Filter With Adopter , Assy Clutch Master Cylinder , Thermostat , Assy Auxiliary , Water Pump Assy , Pump Water , Kit Brake Lining Set Front (Std) , Core Cooler , Brake Drum Spigotted , Assy Stub Axle Std , Assy Drag Link , Pump Lucricating Oil , Power Stg Pump 80Bar (Rane) , Assy Ball Joint Lh Thd , Assy Clutch Master Cylinder , Drag Link Kit , Repair Kit Turbocharger , Set Of Brake Linings W/O Rivets(Wheel Set)Rear Std , Assy Universal Joint , Assy Crank Shaft , Assy Oil Filter (Purolator) , Housing Fly Wheel , Oil Seal , Oil Seal Valve Stem , Seal Valve Stem , Gear Flywheel Ring , Oil Seal (C R Seals) , Gear Fly Wheel Ring , Gear Fly Wheel Ring , Gear Fly Wheel Ring , Oil Seal , Oil Seal , Kit Oil Seal , Valve Guide Seal Exhaust(Chicago Rawhide) , Oil Seal (Hand Beake Shaft) , Oil Seal , Oil Seal ( Cr Seals ) , Oil Seal (Inner )135X170x15 , Concord Brg(Bimetal)Normal 1 , Synchronising Cone , Oil Seal(Outer ) 125X150x12 , Assy Ball Joint , Sealing Ring , Assy Housing Block , Gasket Therm Hsg Cyl Hd , Oil Seal Cam Shaft Rear (Cover) , Sealing Ring , Oil Seal , Seal O Ring (Big) , Shaft Seal , Gasket Exh Manifold Pipe , Gasket , Gasket Tube To Tc , Brake Lining Std , Oil Pump Drive Shaft , Repair Kit (Minor)M/C , Fulcrurn Pin , Fuel Line (Fuel Filter To Fip) , Fuel Flexible Pipe (From Fuel Filler To Fip) , Assy Refilling Container Complete , Gasket(Turbine Inlet) Sankar , Repair Kit Major Master Cylinder Consisting Of , Retainer Oil Seal Dana , Oil Sump Gasket , Fuel Line (Feed Pump To Fuel Filter) , Drive Gear , Oil Seal , Brake Lining Std , Major Repair Kit Clutch Booster 70 Dia , Drain Cock , Slave Cylinder , Gear Fly Wheel Ring , Pully (3 Grooved) , Water Pump Repair Kit , Sealing Ring , Water Pump Kit (Minor) , Kit Repair Water Pump , Sealing Ring , Set Of Brake Linings W/O Rivets(Wheel Set)Rear Rs I , Kit Brake Lining Set Front(R/Si) , Wheel Set Brake Lining Frt R/S Ii , Dual Brake Valve , Water Pump Assy , Water Pump Kit (Major) , Tube Injector Kit (1 2 3) , Fuel Line Nls Filter To F1 , Ball Joint Assy (Lowre) , Assy Tie Rod , Oil Seal , Assy Fuel Line , Tube Injector Kit(4 5 6) , Assy Hub Front , Assy Bkt Shac , Kit Lining Set(Rear)(R/Si)M/S Bil , Set Of Brake Linings W/O Riverts (Wheel Set) Front Std , Caliper Brake Rh W/Shim , Oil Sealinstallation Tool , Dual Brake Valve , Kit Caliper(With Piston) , Assy Fuel Filter ( Lucas) , Brake Drum(Front) , Wheel Set Brake Lining Frt R/S 1 , Assy Oil Pump(Shorter Version) , Assy Oil Filter Complete(Spin On 138 Ht) , Assy Exhaust Brake Unit , Kit Rear Lining Set (Std) , Brake Shoe Lining And Roller Assy , Assy Steering Wheel Without T Emblem , Wheel Cylinder Assy 50.8 Mm , Hand Brake Valve , Tie Rod End Rh , Assy Pressure Valve Cap (14Psi) , Front Brake Overhaul Kit Minor , Clutch Slave Cylinder , Assy Pressure Valve Cap (7Psi) , Thermostst(Caltherm 120Lph) , Oilseal , Thermostate(78 Sot Gasket Cover To Thermostate Hsg) , Seal Kit (Valve Sleeve) Comprises Of , Oil Seal(Crank Shaft Front) , Rack Pad Adjuster , Pressure Line 6Th Cyl , Seal O Ring (Small) , Oil Seal , Assy Cap , Oil Seal 39X57x9 , Washersealing , Oil Seal , `O` Ring , Side Seal(M.B.Cap Rear) , Sealing Ring Rubber , Rubber Seal (Seal Holder To Joint , Gasket (For Top Cover) , Gasket ( Water Pump ) , Gasket Water Pump Nls , Rear Axcel Shaft (Through Headned) , Gasket Water Pump Nls , Shifter Fork (Reverse) , Gear Speedometer Drive , Shifting Fork (For Second And Third Gear) , Selector And Shifter Shaft , Bush King Pin , Oil Seal , Oil Seal , Assygear Shifting Lever Knob , Reverse Indicator Switch , Reverse Light Switch , Shifter Fork (1/23/4 Speed) , Drive Shaft , Counter Shaft , Synchronising Ring (5Th Speed) , Shiffer Sleeve , Synchroring 5Th Speed , Gear Front , Needle Cage Double Row , Bearing Housing , Transmission Housing Cover Front , Gear Shift Lever Assy (With Bushes) , Magnetic Drain Plug , Bearing Ball , Thrust Washer , Taper Roller Bearing 92.075X50 8X24.6 (28580/28521) , Tappet Roller Brg For Counter Shaft (40X90x25.25) , Brg Taper Roller , Four Point Ball Bearing , Angular Contact Ball Bearing [Skf][100X45x25] , Taper Roller Bearing Inner 80X140x35.25) , Taper Roller Brg ( 95X145x39) M/S Abc , Tapper Roller Bearing (Pinion) (65X145x39.75) , Tapered Roller Brg(Hyp Pinion) , King Pin Lower , Bearing Cyl Roller , Cylinderical Roller Brg , Brg Taper Roller For Differantial , Bearing Cyl Roller (For Tail Pinion) , Cylindrical Roller Thrust Bearing 100X75x 7.5 , Cylinderical Roller Brg , Four Point Ball Bearing (100X45x25) , Pulleyfan , Tapered Roller Thrust Bearing Normal (72.6X38.65X21.43) , Assy Fly Wheel , Main Shaft (Thrust Brg Arrgmt) , Taper Roller Brg Outer , Assy Flywheel , Assy Fly Wheel , Assy Helical Gear (5Th Speed) , Ring Gear , 6 Pk 1060 El Epdm Belt Samsons , Ring Gear , Seal Oil , Hose Rubber ( From Engine Outlet) , Assy Cl Rel Brg(Self Centering) Texspin , Seal Injector , Needle 2X13.8 Br 11 Is 4217 , Ball Brg (6204 2Rsr C3) , Needle Bush , Srdg Brg 20 Bc 02Xee/47X14 6204 2 Rs , Spring Pin (Rear Spring) , Oil Seal(Crank Shaft Rear) , Bearing Needle Cage , Bushing Unboard Std , Brg Assy W/O Race , Stop Light Switch , Bush , Sre Bearing , Cylindrical Roller Bearing , V Belt Nls 6Gr 1316 Mm , Taper Roller Bearing , Rpm Meter 24V 552H M/S Minda , Bearing Wheel Hub Inner , Front Spring Shackle With Bush , Assy Drag Link , Cylindericalroller Bearing , Bearing Taper Roller (133.35 X 85.725 X 30.163) , Tapper Roller Bearing Rear Hub , Taper Roller Brg (100X445x27.25) (Skf) , Assy Radiator Pipe With Hose , Hose Engine To Radiator , Assy Spring Shackle Rear , Ball Bearing , Srdg Ball Bearing 42X20x12 60042 Zr , Roller Cage (Double Row) , Roller Cage (Double Row) , Roller Cage Single Row , Poly Vee Belt (6 Groove) , Needle Bearing (Input Shft ) , Cylindrical Roller Bearing(Drive Pinion) , Roller Ring , King Pin (Upper ) , Srdg Ball Bearing (Skf 62110) , Brg Needle , Taper Roller Brg (Skf) , Spring Pin , Roller Cage (Double Row) , Poly V Belt 6 Pk 1255 L(Samsons) , Ball Bearing , Rubber Bush , D G Ball Brg(6202-2Rs 1/C3 Ht 22B) , D.G Ball Brg.( 6203-2Rs/C3htb) , Pivot Bush , Assy Drive Shaft Rh Inner , Cylindrecal Roller 4X8 , Bush , Twin Gear Counter Shaft 2/3Speed , Sewling Ring Assy , Rubber Hanger , Kit Brg Strap Bolt Dana , Assy Shackle (Rear Sprg.) , Rubber Bush , Set Piston W/O Rings Gr A , Set Of Piston Ring Std , Reston Ring Set Std , Steel Ball 11Mm Iii , Cylinder Head Gasket(Mls)Reinz Euro Iii , Engine Gasket Kit Upper , Bearing Block , Bever/Pinion Differential , Gasketcylinder Head , Rubber Support Front , Rubber Bush , Gasket Cyl Head , Assy Hose , Hose Flexible , Gear Flywheel (138 Teeth Bolt Type) , Gasketvalve , Rubber Mould (Wind Screen ) , Gear Camshaft , Gasket(Cyl Hd Cover) , Gasket Head Cover , Shifter Finger , Shifter Finger , Spider Differtial , Shaft Speedometer Drive , Assy Combi Screw (To Cover Timing Gear Housing) , Set Ofcon.Rod Bearing R/S-I Consistingof Bearing Con Rod (0.25 Mm Oversize) , Brass Pad(2Per Fork) , Cover Push Rod , Cover Push Rod , Set Of Connecting Road Brg R/S Ii , Gasket (Cover To Thermostat Housing) , Gasket Cover (Rh) , Clamp Hose , Oil Pump Gear (Driven) , Gasket Gear Cover , Bolt M8x55 Is-1364 , Repair Kit For Pistonring , Sleeve Salvage/Liner , Set Of Main Bearing 0.25 Mm Over Size(R/S-I) Consisting Of Three Items. , Gasket Inlet Manifold Cover , Hose Flexible , Gasket , Closing Ring , Shim 0.16Mm Thick , Oil Catcher , Boot , Con Rod Bearing Set Std , Link Rod (W/O Ball Joints) , Stud , Bracket(On Cyl. Block) , Tube Oil Gauge , Lever Shut Off Plate , Slinger Oil , Bearing Assy , Gasket , Packing Ring , Bearing Bush Ce , Sealing Ring , Blinker Glass Rh , Cup Moulding , Adapter Filter Head , Banjo , Assy Control Shaft With Lever , Ring Valve Seat Std-1 , Feed Pump Plunger(Blue) , Lever & Peg Assy , Oil Seal , Hose Pump , Major Kit Wheel Cyl , Suction Valve Seat , Lamp Interior , Cover Locker Wier , Slector Shaft , U Clamp (Rh) , Screw , Oring Rack Pad Adjuster , Front Spring Leaf 10Th , Impeller , Reducing Nipple , Assy Turnindicator , Gasket For Inspection Cover , Brush Assy , Hose Back Leak (270 Mm Length) , Dips Stick Liquid , U Clamp (Lh) , Rubberhose , Banjo Bolt , Piston (Plunger) , Assy Pull Road (Exhaust Manifold Side) , Piston , Adapter Oil Filter , Bal Brg (Skf) (62X25x17) , Oil Seal , Pad Spring , Assy Pipe , Amplifier Relay , Assy Hose , Injection Plug , Seal Ring , Assy Air Filter , Connector Banjo , Spring Housing , Rubber Buffer , Sealingring , Butting Ring 3.2Mm Thick , Handle(Door Inner Without Electro Plating) , Delivery Valve Holder , Spanner Adjustable A-300-Is-6149-G-2 , Assy Tube , Idling Spg , Connection Water Outlet , Capsule(Mico) , Gear For Drive Shaft , Connector , Clutch Plate Steel , Bearing Bush(Int Bracket) , Fuel Gauge , Centre Pin , Gasket (Shift Cyl) , Brake Shoe , Mtg Bkt Top , Plunger Spring , Gasket , Gaskt (Betweenupper & Lower Half) , Compression Valve Seat , O Ring Worm Cover , Screw For Inspection Cover , Screw For Inspection Cover , Ring Spanner 8X 9 , Hazard Warning Switch (Pec) , Suction Pipe (Air Filter) , Gasket , Fexing Bolt , Gasket Turbine Outlet , Set Of Gasket Kit , Seal Ring (Mico) , Gasket , Pinion Spring , Brush Spring , Shim 0.10Mm , Bearing Ball , Delivery Spring Valve , Shim 0.12Mm Thick , Woodruf Key (On Cam Shaft) , Rubber Grommet (In Brackets) (Brake House) , Setof Con Rod Bearing Std , Set & Connecting Rod Bearing Std , Ring , O Ring , Clampv Band , Hex Collar Bolt Dicor Euro Iii , Bush Bonnet Hinge , Bracket , Gasket Ring , Gasket Lub Cooler , Bracket (On Timing , Oil Tray In Rear Housing , Clamp Lower , Asy Oil Separator , Assy Wiper Arm , Gasket , Hoseflexible , Hose Flexible , Hose Flexible , Hose Flexible , Hose Plain , Hose Plain , Valve Pressure Relife , Ring Spanner 8.0 24X27 , Valve Exhaust(Euro Iii)Evl , Hoseplain , Hose Plain , Cover Lower , Kit Insert Exhaust Valve , Needle Brg , Bush Con Rod , Bush Con Rod , Cover(Rear Hub) , Gasket (Intake Mani.Cum. Head Cover Ssl) , Slider , Gasket Filter Head , Threaded Ring , Hub Bolt , Insert Valve Exhaust , Insert Valve Intake , Support Camshaft , Assy Gasket Oil Sump , Wheel Mounting Bolts , Butting Ring 6.95Mm Thick , Valve Exhaust , Valve Exhaust , Gasket Gear Housing , Valve Intake , Dipstick , Gasketvalve Cover , Gasket Valve Cover , Valve Intake , Compression Spring , Snapring2.83Mm Thick , Snapring 2.68Mm Thick , Scraper Ring , Compression Spring , Gasket (Benco Talbros) , Kit Insert Inlet Valve , Washer Sealing , Carrier , Rod Push , Valve Exhaust , Cartridge , Gasket Rr Cover Adp Hsg , Synchronising Cone , Nut M 12X1.5 Is-1364(Mig Pad To Engine Cross Member Front) , Screw Hex Head Cap , Seal Valve Steam , Seal Valve Steam , Bush Rod , Oil Seal , Ring Retaining , Spring Seat , Stud For Timing Belt Tensioner , Spring (For Accord) , Sealing Ring , Shim 0.10Mm Thick , Pressure Spring(Rev Ind Switch) , Spring , Nut Hexagon Flanmge , Collet Valve , Shim 0.5 Mm Thick , Dowel Pin M10x16 , Bolt M8x35 Is 1364 , Wood Ruf Key 8X13 Is : 2294 , Gasket Cover To Crank Case , Gasket (Exhaust Elbow To Turbo Charge) , Nut Hexflange Head Cap , Pin Cotter , Circlip A 28X2 , Plunger , Hose(Vent Tube To Radiator) , Stud , Valve Guide Inlet Std 15 S7d , Adapter Filter Head , Hose Clip , Shim 0.80 Mm Thick , Dowel Pin (12Hbx30 Is 2393)(For Connecting Clutch Housing) , Felt Washer (Sludge D/Screw) , Washer , Hose Clip 16 , Rubber Buffer Rear , Sealing Washer(Injector 4 Sp Dicor) , Hose Plain , Gasket (Cover Front On Hsg) , T Connector , Locking Plate , Valve Guide Std (Exhaust) , Lock Nut , Screw Hex Flange Head Cap , Hex Bolt For Clutch Housing , Lock (For Threaded Ring) , Gasket Front Cover , Hose Clip Screw Type , Hose Clip 21 Ts 17669 , Bushing , Screw. Hex Flange Head Cap , Washer Plain , Gasketflange , Gasket (Cooling W/Line Thermostat Housing With Flange) , Gasket Flange , Spanner De 8 X10 , Gasket(Air Intake Elbow) , Adapter , Pin , Screw Hex Flange Head Cap , Seal O Ring , Seal O Ring , Ring Retaining , Retainer Valve Spring , Bracket Lifting Engine Rear , Assy Hose (B1) , Thrust Washer (Cam Shaft To Cyl Block) , Nut M12x1.5 Is 1364 , Seal O Ring , Elbow Diff Lock Lines Tcone Below Substructur To Diff Lock , Stud Bm12x55 Is 1862 , Valve Spring(Inner) , Brace Fuel Pump , Stud Bolt(For Mtg Cyl Hd) , Plug Thrreaded , Washer Sealing , Ball End , Valve Spring , Hose Clamp Tb 54 , Hoseclamp Tb36 , Sleeve (For Cyl Block) , Hose Scoop To Tc , Sealrectangular Ring , Main Bearing Cap Bolt , Hose Tc Re Pipe To Sump , Vacuum And Pressure Cap , Valve Lock Half , Retainer Valve Spring , Screw Connecting Rod , Connecting Rod Bolt(Fully Threaded) , Clamp Hose , Hose (Scope To Tc) , Set Thrust Washer (Upper/Lower) , Nozzle Piston Cooling , Gasket , Connector Engine Vent , Seal O Ring , Hose (20X110) , Valve Guide Exhaust(Std) , Cover Access , Clamp Hose , Rubber Hose , Link Rod (224 Long ) , Seal Rectangular Ring , Rubber Hose (Overflow Line To Joint) , Clip , Thrust Spacer , Valve Seat Ring Exhaust Normal-1 , Adjusting Screw , Tube , Connector Female , Spacer Ring , Tube Fuel Supply , Assy Wheel Nut , Tube Fuel Supply , Tube Fuel Supply , Tube Oil Filter , Nuthexagon Flange , Hose Therm Bypass Pipe , Connecting Road Bearing Std 1 , Rubber Hose Moulded (Cover To Pipe) , Assy Engine Mtg Head Rear , Cylinder Liner , Rubber Hose ( Water Fill Pipe ) , Screw Banjo Connector M 10X1 X19 , Collar Screw , Dipstick , Ball Pin A 10 , Hose Rubber( Radiator Water Pump ) , Tube Oil Guage , Rubber Hose (Radiator To Engine) , Hose , Rubber Hose (Radiator To Eng) , Spacer , Rubber Hose Engine Vent , Dipstick , Sealing Ring (Mico) , Cover Valve , Hose Plain , Hose Plain , Gasket Rear Cover , Banjo Connector , Oil Seal Camshaft Front , Assy Throtle Valve , Cap Rubber Protective (On Gear Box Top) , Guard Plate 2.90Mm Thick , Valve Cover , Assy Hose , Hex Screw M6x20 Is 1364 P2 88 Ss 8451 , Hex Screw M8x25 Is 1364 P2 8.8 Ss 84 , Rubber Hose , Assy Hose , Tube Fuel Supply From Filter To Fip , Screw M16x1.5X40 , Hose Assy , Asd , Banjo Bolt , Liner (Ipl) , Hose Clamp Tb 126 , Fuse 50A Light Blue , Over Flow Valve , Centre Pin , Assy Bracket Rh(Eng Mount Rear On Frame) , Hoseelbow , Hose Plain , Assy High Pressure Hose , Breakhose 550 Mm Long , Hose (Pipe To Pipe) , Cover Intake Manifold , Assy Hose , Assy Pull Cable Engine , Engine Screw Driver 1.2 X8 X150 , Hose (Radiator Top) , Compression Ring , Rubber Hose , Hose(Radiator To Water Pump) , Rubberhose( Engine To Radiator ) , Spring Valve , Hose Flexible , Hose Flexible , Hose Flexible , Oil Seal (For Hub) , Thrust Washer Lower Std(Menon) , Repair Kit For Piston Consisting Of- Sixitem , Spanner For Wheel Nuts , Liquid Gasket , Hose Plain , Drive Square , Assy Bracket Top , Assy Timing Belt Tensioner Complete , Rubber Hose (Radiator To Thermostat , Rubber Elbow ( 12 Id X150x 150 ) , Set Of Main Bearing 0.75Mm Over Size (Rs-Iii) Consisting Of Three Items , Radiator Hose Outlet , Assy Hose , Hose Assy , Decarburising Gasket Subkit , Hose Straight , Spacer Pilot Taper Roller Bearing Of Main Shaft , Gasket Cylinder Head Std 0.15Mm Over Size , Nut For Pulley , Hose Aux Tank To Water Fill Pipe , Assy Exhaust Pipe(Manifold) , Bearing Set R/S 11 , Eng Gasket Subkit , Housing Thermostat , 4X4 Shaft Joint Assy , Engine Overhaul Gasket Kit Tc , Engine Gasket Kit Lower , Wrench For Hub Lock Nut , Gasket Exh Manifold , Connection Turbo Oil Drain , Cover Gear , Clamp Hose , Bearing Set R/Si , Major Repair Kit Consisting Of -16 Items , Rubber Hose(Radiator To Engine) , Stud , Platecylinder Block Stiffner( Bed Plate ) , Plate Cyl Block Stiffner(Bed Plate) , Pin Piston , Clamp Hose , Hose Elbow , Hose Elbow , Exhaust Valve , Assy Hose , Poly V Belt 6 Pk 1245 (Samsons) , Engine Overhaul Seal Kit Bs Iii , Set Of Con Rod Bearing R/S Iii Consisting Of , Set Of Con Rod Bearing R/S-Iii , Set Conrod Brg Normal , Spacer Fan , Assy Pump From Stg Pump To Stg G Box , U Clamp Rear Spring , Reducer Hose(Ontc) , Tube Oil Filler , Bolt Connecting Rod , Assy Hose , U Clamp , Rubber Hose , Mounting Pad Rear , Pin Timing , Poly V Belt(6 Pk 1360 El) , Poly V Belt(1360 Svl A/C Fan Samsons) , Rubber Hose Engine To Radiator Inlet , Capfiller , Manifold Fuel , Rubber Hose , Spacer Fan , Thrust Washer 2.05Mm Thick , Repair Kit Quick Release Valve , Compressionring , Braceair Compressor , Hose Clamp Tb 38 , Gasket , Flat Seal Ring (Mico) , Hose Int Cool Pipe Bottom , Hose Plain , Piston Pin , Connection Water Inlet , Valve Seat Ring Inlet Normal , Gasket , Rubber Hose , Thrust Washer 2.00 Mm Thick , Spherical Washer , Leakage Oil Line , Hose ( Radiator To Water Pump ) , Alternator (12V 55 Amp) , Assy Oil Ring Iii(G) , Pipe(Tc To Ic) , Screw Hex Head Cap M14x2.0X119 , Hose (102 1Dx120l) , Torqure Support Front , Rubber Hose (Cooling Water Line To Thermostar) , Assy Rubber Stoper (Bump) , Tube Fuel Supply , Tube Fuel Supply , 1St 3Rd 5Th 7Th 9Th And 11Th Rocker Arm Left With Bushing , 2Nd 4Th 6Th 8Th 10 & 12Th Rocker Arm Right With Bushing , 1St 3Rd 5Th 7Th 9Th 11Th Rocker Arm Left With Bushing , 2Nd 4Th 6Th 8Th 10Th 12Throcker Arm Right W/Bush , Screw M12x1.5X24 Banjo Connector , Assy P/Stg Crimp Pipe Stg G.B To Tank , Flat Collar Nut , Plunger Pressure Regulator , Bell End Amb10 Ts15624 , Gasket , Seal Rectangular Ring , Hub Bolt Front (M 20) , Plate Cover , Valve , Banjo Bolt , Thrust Washer (Idler Arm) , Intake Valve , Spring Valve , Spring Valve , Gasket , Gasket (Fip To Support) , Hose(To Assy Oil Separator , Sealing Ring Half (Set Of 2) , Bolt M12x1.5X40 , Dial Gauge Attachment , Ring Retaining , Clamping Nut , Seal Rectangular Ring , Seal Rectangular Ring , Plug Pipe , Assy Hose (To Air Pressure Gauge) , Spring (Brake Return) , Bracket Lifting Engine , Centre Bolt M12x187x11 Is 9484 , Locking Ring S10 Ts 15624 , Seal Benjo Connector 6.2 Mm , Plate Locking , Bolt M18x1.5X55 , Hose , Thrust Washer , Spring Compression , Dust Valve , Dust Valve , Center Bolt M 10 X75 X9 , Stood Bm12x40is1862 , Gasket Turbocharger , Gasket Turbo Charger , Teefemale Branch , Spacer Pump Support , Banjo Bolt , Bolt M18x1.5X65 , Hallow Screw , Housing Timing Pin , Brace Fuel Pump , Seal `O`Ring , Plug Pipe , Gasket , Tube Turbo Oil Drain , Seal O Ring , Bracealternator , Seal Rectangular Ring , Seal Rectangular Ring , Hose(Breather) , Thrust Washer Upper Std(Menon) , Retorn Spring , Main Bearing Upper Normal , Main Bearing Lower Normal , Spacer , Bolt , Sealing Washer 18X22 Is-3175 , Bush-Connecting Rod , Stud , Screw Twelve Point Cap M10x1.5X35 , Gasket(For Support) , Rubber Hose (Assy Pipe Elbow To Assy Pipe) , Rubber Hose (Thermostate Cover Yo Radiator) , Gasket , Gasket Oil Drain , Screw Twelve Point Cap , Rubber Mounting (Bottom) , Plug Expension , Screw Banjo Connector , Screw Banjo Connector M 12X1.5X24 , Hose , Hose Back Leak(35 Mm Length) , Screw Hexflange Head Cap M8x1.25X90 , Lock Retainer Valve Spring , Connecting Bushing(Unbored) , Seal Grommet , Stud Bm12x80 Is 1862 , Screw Hex Head Cap , Shim 0.40 Mm Thick , Screwhex Flange Head Cap , Pipe Union Bolt 8M12x1.5 Ts 16405 , Spring Compression , Pole Screw , Connecting Nipple Inner , Screwbanjo Connector , Gasket Timing Gear Housing , Clip Hose , Plug Expansion , Valve Spring Retainer , Lock Retainer Valve Spring , Seal O Ring , Hose Back Leak(60 Mm Length) , Assy Combi Screw , Nut , Anti Rattle Clip , Clip , Shim(2.40) , Hose Clip 17.Ts 17669 , Hose Back Leak(35 Mm Length) , Sph.Washer 8.4 Is 4297 Ss 8400 , Rubber Hose (6 Idx80 Long) , Dowel Ring M16x10 , Screw Round Head Cap M5x0.8X17 , Plug Expansion , Sealing Washer , Clamp , Dowel Sleeve (For Starter) , Wheel Bolt 45842-1 , Screw M 12X35 Is 1364 , Tappet Valve , Screw Hexflang , Seal Rectangular Ring , Screw Hex Flange Head Cap , Screw M 10X25 Is 1364 , Spacer Washer 0.2 Mm Thick , Hex Screw M8x18 Is 1364 P2 8.8 Ss 84 , Screwhex Flange Head Cap , Nut(Connecting Rod) , Rubber Bush , Seal Rectangular Ring , Dowel Ring , Screw Hexflange Head Cap , Screw , Gasket Connection , Connecting Nipple Iner , Bolt M10 X 85 Is 1364 , Screw Hexhead Cap , Washer Plain 1.65 Thick , Hose Clip 30A Is 4762 , Valve Spg Pressure And Suction Valve , Shim 0.05 Mm Thick , Bolt M6x60 Is1364 , Shim 0.20Mm Thick , Spacer Washer 0.1 Mm Thick , Key Plain Woddruff , Spring Washer B12 Is 3063(Mtg Pad To Eng Cross Member F) , Bright Washer 6.4 Is 2016 St Ss 8451 , Pin Cylindrical 8X16 Is 2393 , Spring Washer B6 Is 3063 Ss 8451 8C , Screw M6x12 Br1364 , Roller 4X12 11 Js 4217 , Shim 0.1Mm Thk , Snap Ring 2.68Mm Thk , Hose Clamp(50 Dia)(Jupitor) , Screw Connecting Rod Mj11x1.25X59 , Oil Seal , Washerplain , Isolatornoise , Gasketexhaust Main Fold , Isolator Noise , Screwflange Head Cap , Assy Pipe(Sig Pump To Power Stg Tank) , Kit Brake Lining Front Std (Per Axle ) , Assy 228 Dia Clpressure Plate , Gasket Connection , Cap , Washing Sealing (1/2) , Bushing(Oversize For No 1 Bore) , Eng Overhaul Gasket + Seal , Minor Repair Kit Consisting Of -8 Items , Valve Cone Half , Plugexpansion , Bush , Pump Water , Screw Plug , Plug Expansion , Gasket , Collet Valve , Valve Kit , Cartridge , Drain Valvewater Separator , Filter Assy , Assy Clutch Pressure Plate 310Mm Dia) , Assy Clutch Pressure Plate , Strainer Fuel , V Belt (1325 Mm) , Cl. Cover Assy.310 Dia-Luk India (Ph-Iii) , Strainerfuel , Straines Fuel , Pump Water , Assy Rubber Support Rear , Guide Valve Stem Inlet , Sealing Washer 16X20 Is - 3175 , Gasket Cap Cyl Hd Cover Tc , Valve Guide Seal , Sprocket(On Crankshaft) , Minor Repair Kit Cylinder Head , Cap Main Brg , Mandrel For Clutch Plate Alignment , Hand Priming Pump , Pipeair Inlet , Drift For Installing Spigot Bearing In Camshaft , Drift For Crank Shaft Rear Oil Seal , Major Reair Kit , Drift For Outer Race Of Taper Roller Bearing Of Drive And Main Shaft , Cover Air Compressor , Head Fuel Filter (Bottom) , Drift For Removal Of Liners , Drift For Removal Of Exhaust Valve Guides And Installation , Engine Overhaul Gasket Kit Tc Bs Iii , Set Of Bare Piston (Rs Ii ) , Piston , Eng O/H Gasket Kit , Puller For Revarse Shaft , Puller For Reverse Idler Shaft , Handle To Be Used With Drift , Drift For Oil Seal , Drift For Installation Of Oil Seal Front Cover , Bearing Set Upper And Lowerr/S 11(Binetal) , Drift For Crank Shaft Oil Seal , Valve Spring(Outer) , Support , Assy Adaptor For Fip Timing Checking(Mico) , Valve Inlet(Euro Iii)Evl , Drift For Installing And Removal Of Con Rod Bushes , Support Engine Suspension Front , Hand Priming Pump , Gasket(Push Rod Chamber Cover) , Set Thrust Washer U/L Std(Menon) , Tube Dip Stick , Drift For Installation Of Water Pump Bearing Outer Race , Vacuum Indicator , Valve Seat Ring Inlet(Cng) Normal , Gasket , Gasket (Cylinder Head Cover) , Guide Valve Stem Exhaust , Assy Timing Belt Idler , Collar Bushing 47.6 Mm Long , Release Lever Kit , Tab Washer(Mico) , Bush , Cartridge , Filter Fuel , Steering Pump(Direct Drive) , Steering Pump ( Direct Drive ) , Auto Slake Adjuster Straight , Sub Assy Clutch Housing , Assy Radiator Complete , Assy Radiator (Banco) , Assy Radiator Complete , Inter Cooler Tubular Type , Cartridge Lub Oil Filter , Assy Radiator Complete , Reservoir Viso F 27/4 , Caliper Brake Lh W/Shim , Clutch Release Yoke , Assy Steering Oil Reservoir , Filter Element Safety , Separator Fuel Water(Cartridge) , Cartridge Lub Oil Filter , Assy U.J. Steering , Manifoldexhaust , Pressure Cap , Return Spring(Brake Shoe) , Assy Centre Brg Bracket Greasable , Sleeve Wear (Rear) , Sleeve Wear(Front) , Connector Oilsection , Damper Vibration , Assy Pull Cable , Rubber Housing , Speedo Cable (Jis) 4300 Lg , Speedo Cable 3.2 Dia 4300 Mm Long , Speedo Cable 3.2 Dia 4300 Mm Long , Assy Relly Cable Eng Stop , Rubber Buffer(Upper) , Gasket(Carrier) , Rexehe Bellow , Pull Cable Accelerator , Release Lever Service Kit , Gasket Set , Assy Outer Handle Rh , Assy Outer Handle Lh , Stud,Camshaft Bearing Caps , Assy Accl Stopper , Bush (Stay Rod) , Gasket(In Between Cover To Hub) , Gasket , Gasket Cover Plate , Rubber Buffer(Radiator To Cab Bracket) , Delrin Bush , Gasket , Gasket , Prefilter Seive , Spanner Deac 9X11 , Hose(Radiator Pipe To Engine) , Gasket For Feed Pump , Gasket , Centre Bolt M12x246x11 Is 9484 , Rubber Bellow(On Release Fork) , Thin Castle Nut M 32X1.5 , Assy Engine Mount(Rear) , Assy Connecting Line , Door Handle Inner , Handle (Lh) , Assy Cap Radiator , Nut M18x1.5 (Is 1364) , Assy Wiper Arm , Head Fuel , Adaptor For Oil Pressure Transducer , Pipe (Engine To Radiator) , Assy Support Arm , Minor Repair Kit Clutch Booster 70 Dia , Bolt M12x1.5X45 Is 1364(Assy Support Towing Hook To End Cross Member) , Assy Refilling Container , Assy Sunvisor Rh , Assy Sunvisor Lh , Assy Hose , Assy Precleaner , Service Kit Minor Rear , Assy 228 Dia Clutch Cover Luk India , Element (Primary) , W/Cyl Assy 26.99 Dia M/S Bil 2966568 , Steering Spindle(Bottom) , Kit Pad (Consisting Of 4 Pads) , Steering Spindle Top , Tie Rod End Lh , Piston Rack Seal Kit , Assy Radiator , Cross Universal Joint , Kit Brake Lining Frt O/S I (Frtrear) , Brake Fluid Reservoir , O/S Hub Assy , Assy Fuel Pressure Line ( 1 & 2) , Assy 228 Dia Driven Plate (Wad) Luk India , Rear Brake Chamber/Acuator Assy , Trailer Control Valve , Minor Kit Wheel Cyl , Assy Hub Front , Kit Automatic Slack Adjuster , Cylinder Head , Assy Radiator , Spindle Wheel Bearing , Clutch Disc Repair Kit , Assy Air Filter , Assy Power Stg Gaer Box , Hand Brake Valve(Voss) , Kit Lining Set , Assy Steering Column Support , Assy Radiator Complete , Roller , Break Auide Container , Assy Oil Cooler , Clutch Disc 228 Dia , Pad Assy , Speedo Cable ( Jis) 3000 Mm , Return Spg , Gasket (Gear Box Hsg Cover Rear) , Service Kit Cam Shaft (Rear) , Assy Master Cylinder (38.1X75 Stroke) , Repair Kit For Clutch Disc , Mounting Pin ( Lower)) , Major Repair Kit For M/Cyl , Seal Kit (Trunior) Comprises Of , Repair Kit Minor Clutch M/Cyl , Gasket (Between Rr Axle & Cover) , Tube( On Rank Case) , Assy Tube , Assy Inner Handle Rh , Gasket , Assy Guide Channel Rh , Assy Guide Channel Lh , Spanner De 13 X 16 , Assy Rubber Mounting Top , Gasket (Hub) , Assy Spacer Block Complete , Assy Pull Cableaccelerator , Spacer Lh , Spring Brake Shoe Return , Mud Flap Outer Rh Wheels , Gasket , Link Rod (1004 Long ) , Pressure Spring Complete , Bush Fulerum Pin , Gasket (Coveer Gear Box Hsg Rear) , Assy Gear Shift Lever Knob (6 Speed) , Flange Gasket , First Aid Kit , Gasket , Kit (Cam Adjuster) , Rubber Cover , Security Ring , Rubber Buffer(Radiator Frame Mounting) , Reflex Reflector , Grease Nipple , Gaskrt (Front Cover Upper) , Assy Propeller Shaft Reaar (From Aux Gear Box To Per Axle) , Gear Box Housing , Gasket To Front Locking Cover , Shifting Fork (For First Gear) , U J Kit Assy , Engaging Gear (Reverse) , Gasket (In Between Over To Hub) , Gasket Push Rod Cover , Driven Shaft , Assy Winding Regulator [Rh] , Assy Winding Regulator [Lh] , Wind Shield Glass (Single Piece ) , Air Filter Element Tc , Glow Plug , Assy Cyl Head , Pump Fuel Transfer , Camshaft , Cam Shaft , Housing Gear , Seal Oil , Set Of Bare Piston R/S-I Consisting Of -Piston Pin Pistonring Retaining , Set Of Bare Piston R/S 1 , Cyl Head Gasket , Fuse 20A Yellow , Safety Cartridge , Side Indi . Lamp Lh , Side Indi . Lamp Rh , Lamp H4 12V 60/55W For Head Lamp , Lamp H4 12V 60/55W , Assy Blinkerlamp Rh , Assy Horn (100 Dia) 12V Low Tone Padmini , Starter Push Button , Assy Rear Shock Absorber , Water Temp Guage , Crank Shaft Gear , Drift For Installation Of Taper Roller Bearing , Assy Nozzle Holder , Assy Connecting Rod W/O Brg Shells , Puller For Front Wheel Hub Outer Bearing Outer Race , Fuel Pump Timing Tool (Extension) , Puller For Coupling Flange , Connecting Rod With Serreted (W/O Brg) , Puller For Helical Gear Of Oil Pump , Puller For Taper Roller Brg Drive Shaft , Drift Installation Of Taper Roller Bearing Of Main Shaft (Inner Race) , Assy Fuel Rail(Delphi) , Puller For Pilot Taper Roller Brg Main Shaft , Angle Indexing Tool , Assy Feed Pump , Fuel Lift Pump , Fuel Liftg Pump , Alternate With Pulley 90 Dia 35 Amp , Main Fold Exhaust , Asm Motor , Puller For Needle Roller Bearingsoil Seal And Spacer , Battery Cable Positive , Release Travel Setting Gauge , Assy Fuel Heater , Drift For Installation Of Liners , Assy Front Sprg , Injector Assy , 8 Ton Hydraulic Jack With Handle And Spacer Block , Fuel Feed Pump , T Map Sensor , Pivot Bush Frt Suspn , Puller , Drive Gear Fip , Pinion With Bearing [Steel] , Assy Rlease Cable Complete L H , Assy Blinker Lamp Lh , Assy Wiper Blade , Engaging Ring (Reverse Speed) , Shifter Finger , Assy Drive Shaf Lh Inner , Assy Gear 2Nd Stage , Synchronysing Sleeve (2Nd /3Rd) , Wiper Blade , Spacer Ring 7.76 Mm , Kit For Spare Bulb , Fuse 25A Natural , Wiper Motor 24V 17W(2 Speed) , Ring Pin (Std) , Locking Wire , Wind Screen Glass ( Laminated ) , Drive Shaft With Oil Seal Ring , Shifter Fork Upper , Fuse 10A Red , Assy Drive Shaft Outer , Wind Shield Glass , Assy Padding Door Lh , Assy Padding Door Rh , Assy Window Regulator Lh , Assy Window Regulator Rh , Assy Wiper Blade , Assy Coupling Flange (Assy Cover To Bracking Housing , Fuse 5A Light Brown , Shifting Fork For Reverse Gear , Door Glass Lh , Door Glass Rh , Shifting Lever , Butting Ring 7.30 Mm Thick , Rear View Mirror , Brg Wheel Hub Outer , Handle Outer Lh , Assy Rear View Mirror Outer Rh , Assy Rear View Mirror Outer (Lh) , Assy Lock Complete Rh , Assy Lock Complete Lh , Oil Pressure Gauge , Oil Pressure Gauge , Leaf 8Th(Lh) , Terminal Positive , Needle Bearing (Roller Shaft) , Leaf 7Th , Thrust Collar , Rubber Bellow ( Air Filter To Assy Pipe) , Shaft Water Pump , Bal Bearing (85X45x19)(Skf) , Sre Ball Bearing , Terminal Positive , Brush Set , Suction Valve Cap , Leaf 10Th , Nozzle , Pump Element , Air Filter Safety , Worm Adjustercover , Pivot Pin , Moulded Cover , Hoseair Intake , Insulator , Regulator And Brush Set , Rubber Hose (Due To Air Filter) , Assy Reserve Tank ( Aux Water Tank ) , De Bracket , Brake Shoe Rear With Brake Lining 10.3 Mm Thick Std , Plunger , Shifter Fork (1St/Rev) , Heat Sink Assy +Ve , Assy Control Mounting Bracket With Tube , Aux Water Tank Cover , Statar Assy , R P M Meter , Lead Assy Negative , Kit For Cooling Water Thermostat Consisting Of-Six Items , High Press Hose P/S Pump To Gb , Rpm Meter , Bearing Housing , Hose (Radiator To Water Pump ) , Cross Member Rear (Eng) , Clutch Plate Brass , Piston Rack Kit 80 Bar , Clutch Assembly , Slip Ring Assy , Assy Head Lamp (Lh) , Axle Shaft Gear , Transmission Housing , Assy Air Filter , Starter Motor(Lucas Tvs) , Assy Propeller Shaft Rear ( Aux Gear Box To Rear Axle ) , Armature Assy , Pulley , Leaf 5Th , Kit For Clutch (Diaphram) Consisting Of- Three Items , Assy Propeller Shaft Ft Complete , Armature Assy , Kit For Pressure Spring , Air Filter Primary , Assy Radiator Complete , Front Spring Assy Lh , Rotor Assy , Kit Fornozzle Holder Consisting Of -Two Items , Assy Propeller Shaft Rear Comp , Injector , Injector , Kit Connecting Rod Consisting Of - Four Items , Starter Motor 35M 127 (M/S Ltvs) , Solonid Switch , Kit For Cylinder Head & Cover Consisting Of- Thirteen Items , Spring Fixture , Wiring Harness Main , Assydistributor Pump , Assy Fip Complete , Clutch Housing (High Prdie Casting) , Assy Radiator , Fuel Injection Pump , Pump Fuel Injection (125 Hp) , Kit For Water Pump Consisting Of- Thirteen Items , Kit For Steering Gear Pump Mounting & Belt Adjustment Consisting Of-Four Items , Armature , Assy Hub With Stud & Hub Hole (W/O Brg) , Transfer Case Housing , Kit For Main Bearing Consisting Of - Eight Items , Fuel Injection Pump With Governor Feed Pump W/O Inj Timber , Rotor , Solenoid Switch , Sub Assy Clutch Housing , Ce Bracket Assy , Assy Propeller Shaft With Centre Bearing , Kit For Clutch Housing Consisting Of- Eighteen Items , Assy Propeller Shaft ( Gear Box Aux Gear Box ) , Assy Propeller Shaft ( Aux Gear Box To Front Axle ) , Glass Rh , Assy Rear Spring With Aux Spring , Assy First Leaf With Bush , Spray Fluid Refill Can , Piston Ring Expander , Cover , Speedometer (Ratio/0 80) , Brake Drum Rear , Rpm Meter 24V , Assy Head Lamp (Rh) , Drift For Outer Race Of Tapper Roller Brg , C E Shield With Bearing , Rectifier , Assy Aux Water Tank , Air Filter With Sound Deadening Pads , Fd Coil Assy , D E Bearing , Ball Bearing , Heat Sink Assy -Ve , Release Lever Rep Kit (Major) , Sre Bracket , Speedo Meter , Field Coil Auxiliary , Leaf 9Th , Pressure Control Valve , Fan , Locking Bolt , Pumpncartridge Kit Consisting Of -Six Items , Spanner For Crank Shaft , Regulator , Leaf 5Th (Rh & Lh) , Assy Hose With O Ring(Aspiration) , Element , Element , Terminal Negative , Speedometer 1.0.825 , Convoy Lamp , Air Pressure Guage , Leaf 10Th , Oil Pressure Guage , Assy Hose , Major Repair Kit , Assy Bazzle Rh , Leaf 11Th , Clutch Pressure Plate , Hub (Water Pump) , Oil Catcher (Rear Brk Drum Hub) , Assy Wiper Blade , Assy Handle With Out Lock , Wiper Blade Front (Co Driver Side) , Door Lock Front Rh , Dr Square Tmg Belt Tensr , Set Mb Shell(Upper/Lower Normal) , Go Nogo Gauge For Exhaust Valve Guides , Set Piston Rings Std , Holder For Coupling Flange , Extender Timing Pin , High Temp Buzzer Unit 12V , Wiper Arm , Assy Cable Complete , Rubber Moulding Wind Shield , Assy Suction Tube With Strainer , Belt `V` Ribbed , Fan Shroud , Air Pressure Gauge M/S Minda , Assy Hinge Top Rh (Door) , Assy Exhaust Pipe , Doorlock Front Lh , Assy Mudflap Rear , Assy Silencer With Pipe , Pipe To Ic To Engine Turbo Apriated , Engine Mounting Bracket Attachment(To Be Used With Eng Stand Pt No 2573 5890 2401) , Rubber Mould (Rear Window) , Mudguard Rh , Assy Bracket(Rh) Slave Cylinder Mounting , Glass Pane Rear Window , Assy Engine Hood Complete , Assy Propeller Shaft Rear (From Aux. Gb To Rear Axle) , Mudguard Lh , Assy Joint Cross Left , Rubber Moulding (Lh) , Assy Propeller Shaft Front (From Gear Boxto Auxgear Box) , Air Pressure Gauge , Assy Prop Shaft W/Centrebearing Front ( Length 90X1586 ) , Assy Propeller Shaft Front ( From Aux. Gbto Frt Axle) , Assy Propeller Shaft , Repair Kit For Accesories Wiper , Assy Propeller Shaft Front ( Aux Gear Box To Front Axle ) , Assy Intermediate Spindle , Assy Prop Shaft Rear Complete (Length 90X1154 ) , Assy Prop Shaft W/ Centre Bearing Middle (Length 90X808 ) , Propeller Shaft Front , Engine Bearing Tool , Glass Lh , Supporting Sleeve Right , Assy Silencer With Tail Pipe , Assy Propeller Shaft With Centre Brg , Speedometer Electronic (0 80 0 100)Minda , Assy Cable Complete , Supporting Sleeve Lh , Assy Cover Side Lh , Assy Pre Silencer , Assembly Suction Jack With 3 Pcs Handle , Assy Sealing Mould Rh (Outer) , Assy Bazzle Lh , Wipper Controller Ed , Assy Rear View Mirror Out Side , Wiper Timer 24V , Assy Sealing Mould Lh (Outer) , Cross , Electronic Speedometer , Assy Lock Lh , Assy Eng Mount Front Lh , Assy Eng Mount Front Rh , Assy Wiper Blade , Side Cover Gasket , Assy Wiper Blade , Shifter Shaft , Suction Hose Complete , Assy Lock Rh , Speed Sensor 12/24V (8 Pulse) Espeedo , Tappet Removal Tool Kit , Drift For Installing Neddle Roller Brg In Top Cover , Ball Bearing , Ball Bearing , Bush (Idler Arm) , Assy Air Filter , Seperator Fuel Water , Assy Water Pump(M/S Autolec Industries) , Cross Assy , Air Filter Element Safety , Filter Assy , Minorkit Caliper Kb X280 , Filter Wrench , Clutch Housing Lever Part , Assy Twin Pot Caliper Lh Brakes India , Housing , Assy Prop Shaft Complete (Front) , Assy Rear Brake Actuator (Scl) , Assy Radiator(Plastic Tank 560 Core) , Repair Kit (Major) Tmc B1 , Assy Wheel Cyl , Sleeve (Slack Adj End) , Repair Kit For Slane Cylinder , Repair Kit Minor Slave Cyl , Assy Fuel Filter , Oil Filter Cartridge , Clutch Master Cylinder (19.05 Dia) , Slack Adjuster , Assy Clutch Slave Cyl , Clutch Slave Cylinder , Assy Clutch Master Cylinder , Timing Belt(136 Teeth) , Fip Gear(Reduced Module) , Connecting Rod Brg Set R/S-I , Puller , Set Back Leak Hoses , Dial Indicator Assy And Sleeve , Drift For Installing Crankshaft Gear , Set Piston(4 Each) , Set Piston Rings Std , Box Spanner 27 Af , Kit For Oil Separator Consisting Of - Four Items , Inj Puller , Reamer For New Inlet Valve Guides 10 Dia , Ring Gear , Vibration Damper Lock , Set Ofbare Piston Std Consisting Ofthree Items , Set Of Bare Piston Std , Pressure Plate And Needle Roller Service Kit , Master Cylinder (Bi) , Assy Clutch Booster Dia 70 , Assy Raditor Tayatoyo , Assy Aux Water Tank , Cartridge Lub.Oil Filter , Fan Engine With Viscous , Assy Connecting Rod W/O Bearing Shells , Assy Cross Kit , Gasket Flange Exhaust Pipe , Repair Kit(Minor) Clutch Sleev Cylinder , Assy Handle (For Window Regulator) , Thermostat (78 Set) , Flasher Kit (Electronic) , Major Cliper Kbx281 , Major Kit Slave Cylinder , Assy Hp Line (Rail To Injector No 3) , Air Cylinder (Sundarm Cloxton) , Accelerator Cable , Assy Coupling Flange , Desiccant Cartridge , P Way System Protection Valve , Assy Tandem M/Cylinder , Assy Wheel Cylinder 44.45 Mm Dia , Assy Twin Pot Caliper Rh Brakes India , Master Cylinder (Bi) , Vane Pump New (Steering) , Steering Pump , Assy Spring Brake Actuator Type 16/56 , Assy Tie Rod , Universal Joint Yoke , Air Filter Assy , Brake Fluid Container , Drying And Distributor Unit , Assy Master Cylinder(Bi) , Bracket Belt , Rear Brake Overehaul Kit (Minor) , Speedo Cable 3000Mm Long Procal , Minor Rep Kit For Clutch M/Cyl Consisting Of-Seal Sealseal , Assy Air Cylinder , Wheel Brakecyl 38.1Mm Dia , Low Pr Switch , Onloader Valve Assy , Seal Kit (Steering Gear Box) Zf , Assy Clutch Master Cylinder , Repair Kit , Brake Disc , Kit Wheel Cylinder , Repair Kit (Major)M/C , Major Repair Kit For Master Cylinder , Kit Caliper W/O Piston , Assy Inner Handle Lh , Assy Hp Line (Rail To Injector No 2) , Assy Hp Line (Rail To Injector No 4) , Minor Repair Kit For M/Cyl Consisting Of , Bushing , Cylinder Block , Gasket Pushrod Cover , Crankshaft Normal With Pin , Joint Piece , Filter Insert (Stage -I) , Assy Pull Cable (Accel) , Pressure Protection Valve , Bearing Cyl Roller (For Tail Pinion) , Crown Wheel & Pinion 41/7 Ratio , Ignition Cum Steering Lock , Turbocharger , Fan(Viscous) 10 Blades , Pump Water , Fan Engine With Viscous , Sealing Washer A16x20din 7603 Cu , Assy Auxiliary Water Tank , Shift Fork 4/5 Speed , Guard Plate 3.40 Mm Thk , 4Th Gear On Counter Shaft , Reverse Idler Gear Shaft , Cold Start Pilot Kit , Assy Master Cylinder 25.4 Dia , Kit Decarb Gasket Tc , Service Indicator , Assy 310 Dia Clutch Disc , Leaf 10Th , Throwaway Filter , Fuel Gauge (Pricol) , Brush Assy , Axual Roller Brg , Tapper Roller Bearing Front Hub , Housing (Front Axle Joint Cross Left) , Spg Brake Chamber Repair Kit(Msp5/1) , Repair Kit (Msp/2/2&6/7) , Repair Kit (Msp 3/65) , Repair Kit Trailer Control Valve , Door Glass Lh , Door Glass Rh , Assy Window Regulator Lh , Assy Window Regulator Rh , Temperature Gauge M/S Minda , Air Dryer With Unloader Valve , Rep Kit Air Dryer Assy , Wiper Blade , Reverse Light Switch , Wiper Blade Front (Driver Co Driver ) , Lining Kit (Std) , 352 Dia Clutch Disc Assy (1.75Spline) , Cover Assy(1.75 Inch Spline Dia) , Element Fuel Water Seprator , Air Filter Element Primary , Gasket Kit Cyl Head(Air Compressor) , Repair Kit Piston Assy ( Air Compressor , Alternator 24 Volts 75 Amps , Alternator (12V 55 Amp ) , Shim 0.4 Mm Thick , Roller Cage Single Row , Handle Inner Rh , Gasket Kit Oil Sump , (Deleted) Alternator 12V 135 Amp , 17W Hi Power Wiper Motor , 2Nd Leaf , 3 R D Leaf Front Spring , 3.2 Dia Speedo Cable 3600L , 3Rd Leaf , Adjusting Eccentric With Hex Nut , Adjusting Fork , Air Pressure Gauge , Alternator 24 Volts 45 Amp , Assy6 Btaa 155H.P.Engine Completewit , Assy 240 Dia Cl Disc Luk Ind (F 810 Ds) , Assy 6Bt 5-9 125 Hp Engine Complete With , Assy Arm Wiper , Assy Battery Cable Negative , Assy Battery Cable Positive , Assy Blade Wipper , Assy Blinker Lamp R.H , Assy Blinker Lamp With Bulb Lh , Assy Canopy , Assy Clutch Disak 330 Dia (Double Ring) , Assy Clutch Pressure Plate 330 Dia , Assy Combination Switch , Assy Cyl Head With Valve(Mico Injector) , Assy Cylinder Head Complete , Assy Door Lock Lh , Assy Drive Shaft Left Complete , Assy Drive Shaft Right Complete , Assy G-600-6/6.58 Gear Bos Complete Rhd , Assy Fan (Emdet) , Assy Front Shock Absorber Gabriel , Assy Fuel Injection Pump (Lucas) Euro Ii , Assy Fuel Line (Fuel Feed Pump To Fuel F , Assy Fuel Water Seperator With Valve , Engine 697Na (Lowered) Engine Complete W , Assy Handle Outer (Door Lh) , Assy Head Lamp Lh (Lumax) , Assy Head Lamp With Bulb Rh (Motorised) , Assy Head Lamp With Halogen Bulb Lh , Assy Head Lamp With Halogen Bulb Rh , Assy Housing With Diaphragm Spg , Assy Joint Cross Right , Assy Lamp Warning Indicator-4 Bank 24V , Assy Lamp With Switch , Assy Link Rod , Assy Link Rod , Assy Motorised Head Lamp Complete 24V Lh , Assy Oil Filter(Spin On Type 4X4) , Assy Oil Separator , Assy Outer Handle Lh , Assy Outer Handle Rh , Assy Pick Head Bkt , Assy Pipe , Assy Radiator Block W/Filler Cap W/Vaccu , Assy Release Bearing (1.75 Dia) , Assy Release Cable Comp. (Centre Flap) , Assy Safety Belt Lh , Assy Service Indicator , Assy Side Ind.Lamp 24V-Lh , Assy Tail Lamp Lh , Assy Tail Lamp Rh , Assy Wiper Arm (Driver ) , Assy Wipper Arm And Blade Co-Driver , Battery Cut Off Switch , Bearing Needle , Beeper Alarm Unit , Blinker Glass Lh , Blinker Lh , Blinker Rh , Blinker Transmitter , Boot , Bracket (Shovel End) , Brake Actuator(Voss)24/75 , Brake Chamber Type 24 , Brake Shoe With Lining Std , Breakactuator (Voss Lh) 24/75 , Brg Drive End , Brush Box Assy , Brush Carrier Assy , Brush Carrier Assy , Brush Gear Assembly , Brush Set(4) , Bulb 12/3 21/5 W , Bulb F15 Wts 29201 , Bulb G12 V 10W Din 72601 , Bulb Rl 12V 21Din 72601 , Bush , Bush (For King Pin) , Butting Ring 3.10Mm Thik , Butting Ring 3.15Mm Thk , Butting Ring 3.20Mm Thick , Butting Ring 3.25Mm Thk , Butting Ring 3.5Mm Thick , Butting Ring 3.9Mm Thick , Butting Ring 7.00Mm Thick , Butting Ring 7.10Mm Thick , Butting Ring 7.20Mm Thick , Butting Ring 7.4 Mm Thick , Canopy (Top) , Centre Bolt M12x200 Is9484 , Centre Pin Filter Cover To Filter Hsg , Change Over Switch , Clamp , Clutch Release Bearing , Clutch Release Bearing (Self Centering ) , Combi Switch(Ms Harness) , Connecting Rod Brg Set Std-1 , Constant Mesh Gear Counter Shaft(Ratio 1 , Cover Electronic Blinker Glass Rh , Crank Shaft Normal , Crown Wheel & Pinion (41.7) , Cup , Diaphragm , Diaphragm , Diode Aux , Door Handle Outer Rh , Door Lock Lh , Door Lock Rh , Drain Hose , Drive Assy , Drive Engine Electrical Starter , Drive Shaft With Raito 1:8:98 , Dual Brake Valve , Dual Brake Valve(Voss) , Elbow Km 22X1 Sts-16558 , Elect Temp Gauge T , Eng Overhaul Seal Subkit , Assy Engine Complete W/O Starter Motor B , Engine Assy 6 Btaa 5.9 130Hp Bs Iii Engi , Engine Assy With Peripherals For Tata Su , Engine Comple With 3 Rvlineralternat , Engine Screw Driver 08 X 5.5X125 , Exhaust Flap , Fan Assy , Field Terminal , Filler Profile ( Wild Shield Glass ) , Fixing Bracket Assy , Flasher Kit , Flasher(24V) , Flasher(24V) , Follower , Front Spg Assy , Front Spring Leaf 2Nd , Fuel Flexible Pipe , Fuel Gauge , Fuel Water Seprator , Fuse Link 8 , Gasket , Gasket , Gasket , Gasket (Cover) , Gasket Between Cover & Hub , Gear Spur , Glass Regulator , Governor Plunger , Graduated Hand Brake Valve , Halogen Lamp 12V 60/55W , Halogen Lamp 24V 75/70 W , Head Lamp Bulb A 12V 45/40Wdin 72601 , Hex Head Bolt , Hexagonal Key 12 Is 3082 , Horn 12 V , Horn 24 V , Hose Assembly Nonmetalic , Housing (Front Axle Joint Cross Right , Hp Engine Complete With 3Rvliner Alter , Injection Nozzle , Joint Bushing(Top) , Joint Rubber(Bottom) , Key Woodruff Key , King Pin Upper , Kit Lining Set Std Non Asbestos , Kit Starter Motor Cinsisting Of , Knob Gear Shift Lever , L/D Screw Driver 0.4X2.5X50 , Lamp 12V 2W(Black Out Lamp Rear)Ts 29201 , Lamp 24 V-10W 24/1 , Lamp 24V 2 W , Lamp 24V 21Wd 24/1 T529201 , Lamp 24V-4W , Lamp Unit Vehicular , Leaf 6Th , Leaf 6Th (Front Spring) , Leaf 6Th (Lh) , Leaf 7Th , Leaf 8Th , Leaf 8Th , Leaf 9Th , Leaf 9Th(Lh) , Lining Std 12.2Mm Thick , Locator Negative , Lock Washer , Locking Plate , Low Oil Pressure Switch , Main Bearing Set Std 1 , Main Brg Set Std , Main Line Switch , Major Repair Kit Air Compressor , Map Reading Lamp , Master Cylinder Repair Kit , Minor Rep Kit (Tmc) , Nozzle Holder Without Injection Nozzle , Offr Drg 10 Vacuum Booster , Oil Bath Air Filter , Oil Filter , Oil Pressure Switch , Oil Seal , Oil Seal , Oil Seal(Fuel Load Stop) , Plate (Radiator Mtg)Rh , Plate Clutch ( Discclutch ) , Plunger , Power Steering Gear Assy , Pulley , Pump Fuel Injection (Rotary) , Pump Fuel Injection(Rotary) , Quick Release Valvevos W/Adaptor , Radiator Cap , Rear Sprg Assy (Lever) , Rectifier Assy , Reducer Oil Separator , Regulator , Relay , Relay 24V , Relay For Auxilliaries 12V E D , Relay Solehoid Engine Starter Electrical , Relay Starter Solenoid , Relay Valve 1 Del Port Plug , Relay Valve Frt Br Circuit , Relay With Resistor , Repair Kit Air Cylinder , Repair Kit Brake Chamber Type 24 , Repair Kit Drying And Distributtion Unit , Repair Kit Dual Brake Valve , Repair Kit Foot Control Valve , Repair Kit For Stack Adjuster , Repair Kit For Valve Pump , Repair Kit Frt Spring Brake Actuator , Repair Kit Spring Brake Actuator Type 24 , Rotor Assy , Rubber Bellow , Rubber Bellow(Dust Boot) , Rubber Bush , Rubber Hose (Air Filter End) , Rubber Hose (Engine To Radiator) , Rubber Hose Air Filter Outlet , Rubber Hose Engine To Radiator , Rubber Mould W/S Glass , Rubber Pad , Rubber Support Rear Lh , Rubber Support Rear Rh , Screen Filter Assy , Sealing Kit Zf Vane Pump , Shaft Sealing Ring , Shim 0.14Mm Thick , Shim 1.16 Mm Thk , Snap Ring 2.78Mm Thk , Snap Ring 2.88Mm Thick , Spacer Washer 3.35 Mm Thk , Spanner Double End 8X10 , Speedo Cable 3200 Mm Long , Spring Bush , Spring Pin ( To Fix Rear Spring Shackle , Starter Motor 12 Volts , Starter Motor 12V (Make Tvs Lucas Steel , Starter Motor 24 Volts , Starter Motor 24 Volts , Starter Relay 24V 50A , Starter Solenoid Switch , Stator Assy , Stator Assy , Stearing Mtdcombi Switch , Tail Light Vehicular , Tail Light Vehicular , Tapered Roller Brg(Outer) (75X130x41) , Tempe Transducer , Thrust Washer , Thrust Washer 2.30 Mm Thick , Tool Bag , Trailer Control Valve Voss , Un Loader Plunger , Valve , Valve , Valve Seat Ring Exhaust(Cng)Normal , Wheel Cyl With Citradelip 44.45 Mm Dia , Wheel Cylinder 44.45 Mm Dia (Bi) , Wheel Spanner 27X30 A/F , Wind Shield Glass Lh , Wiper Motor , Wiper Motor 17W , Woodruff Key , Assy Blinker Lamp (Lh) , Assy Handle(Winding Regulator) , Assy Blower , Master Cylinder Repair Kit(Api) Consisti , Assy Cab Lamp (With Buib-24 V) , Spring Brake Actuator W/Adoptor Type (12 , Assy Cab Complete(With Roof Hatch) , Assylamp Warning Indicator 4 Bank 24V , Rivet , Pressure Transducer , Crown Wheel And Tail Pinn (41/71Orlikon) , Stearingmtd Combi Switch , Assy Drive Shaft Right Complete , Assy Drive Shaft Left Complete , Rear Shock Absorber , Repairkit Consists Of 17 Items , Drying & Distri Unit Hi Pr Voss , Assy Side Ind.Lamp 24V-Rh , Electric Buzzer , Wiper Timer 24V , Elect.Temp Gauge 24 V (Backlit) , Blinker Lamp Rh 24V , Blinker Lamp Lh 24V , Wind Shield Glass(5.76 Thk) E Certified , Assy Clutch Disc Pressure Plate , Starter Motor 12 Volts , Rubber Hose , Head Fuel Filter , Rpm Meter 24V (Backlit 1200-2000) , Cartridge Fuze Link 10 Amp , Drive Assy , Armature Assy , Field Coil Assy , Oil Ring , Assy Steering Spindle , Temp Transducer , Assy 6Bt 5 9 125Hp Engine Complete With , Assy Gbs-40 Gear Box 8.02 1St Gear Ratio , (Deleted) Engine 697 Ina (Lowered) , Assy Rer Axle Comp Wt Dfrntl Lockr A 104 , Assy Rear Axle Compwith Differental Lo , Ball Socket Hd Comp , Cooling Water Tele Thermometer W/O Plug , Main Light Switch , Glow Plug Switch , Saloon/Out Side Mirror , Radial Seal Ring , Centre Bolt , Centre Bolt , Door Lock (Rh) W/O Locking Device , Door Lock (Lh) With Locking Device , Cover Clutch Housing Upper , Fuel Tank Cap , Castle Nut , Fuel Injection Pump W/Ksb Exptc (Mico) , Pump Fuel Injection(Rotary) , Pumpfuel Injector ( Rotary ) , Pump Fuel Injection(Rotary)Ve 6 , Bolt 083 Ts 17140 , Stud Am10x60 Is 1862 , Hex Nut M8x Is1363 , Wood Ruff Key4x6.5-Is 2294 , Worm Drive Hose Clip 100A Is 4762 , Felt Disc , Return Spring(Clutchrelease For Long T , Air Take Elbow , Clutch Master Cylinder With Bottle , Water Temprature Guage , Assy Tube (15X925) , Speedometer ( 0.84 ) , Alternator With Built In Regulator , Main Line Switch , Cylinderical Roller Brg , Assy Pto W/O Shift Lever , Gasket , Rubber Cap For Rev Ind Switch , Gear Boxhousing , Assy Gear First Speed , Cylinder Head Gasket , Assy Fly Wheel , Fuel Flexible Pipe From Feed Pump To Fue , Rubber Sleeve , Mounting Rubber Lh & Rh (For Front Suspe , Valve Seat Ring Inlet(Normal) , Assy Crank Shaft , Main Brg Set For Shaft Dia 87.75 Mm R/Si , Assy Piston Set ( For Cyl Bore 97.00 Mm , Cam Shaft With Cylinder Pin , Cam Shaft With Cyl Pin , Assy Fuel Filter With Strainer , Rubber Cuff/Hose (For Precleaner) , Piston Pin Circlip With Rings Std , Bracket For Alternator , Seal Kit , Repair Kit Hyd Brake Wheel Cyl Front , Assy Injector Euro Iii/Bs Iii , Claw(For D1 Cr Injector) , Assy Fip (Dicor) Rotary Type , Turbo Charger , Cogged V Belt 1135M Lg , Cylinder Head W/Valves , Valve Guide(Normal) , Roller Chain(Oil Pump) , Alternator With Double Groove Pulley 65 , Kit For Release Lever , Joint Rubber Upper , Joint Rubber(Lower & Upper) , Sealing Ring , Tenth Leaf , Joint Rubber , Friction Pad , Brake Shoe With Lining Std , Stop Washer , Repair Kit Dual Bake Valve , Zf Tank Assy , Steering Assy Complete , Major Seal Kit Steering Gear Box , Assy Power Steering Gear Box , Ammeter (Flat Rim) , Speedometer ( Li ) , Assy Head Lamp With Halogen Bulb Rh , Assy Hd Lamp Lh Withhalogen Bulb 24V , Tommy Bar , Heat Sink Assy(-Ve) , Starter Assy , Slip Ring End Shield , Negative Terminal , Lead Assy , Wood Ruff Key , Insul Washer , Heat Sink Assy , Brush Box Assy , Pulley , Fan Assy , Protective Cap Rubber , Assy Frt Axle Hsg W/Supporting Tube , U Clamp , U Clamp Rh , Assy Drive Shaft Right Complete , Assy Drive Shaft Left Complete) , Rear Axle Shaft , Gaiter , Assy Steering (Zf) , Exhaust Pipe Front Part , Battery Cable (Positive) , Battery Cable (Negative) , Air Pressure Gauge , Switch Key , Assy Hazard Warning Switch ( Push Pull , Assy Clip Locking (Shovel) , Clip Valve End , First Leaf With Bush , Front Spring Assy Rh , Bush , U Clamp , Centre Pin , U-Clamp , Gaiter , Spherical Washer , Bearing Slip Ring End , Assy Hub Rear , Rear Axle Shaft , Rubber Sleeve , Pr Transducer (Oil Pr-Switch) , Assy Indicator Lamp (Hand Brake) , Assy Blinker Lamp (Rh) , Low Air Pressure Switch , Puller For Front Wheel Hub , Wiper Arm , Wiper Motor 17W -Hi Power , Assy Spring Cab Mounting Rear , Rubber Buffer Upper , Brake Lining Front 13.3Mm Thick Std , Brake Lining Front , Assy Boot Rear , Accelerator Lever Assy , Relay With Resister 24V , Brake Lining Rr.Rs , Acessories Kit Wiper , Assy Housing W/Intermediate Flange , Flasher 24V , Assy Blinker Lamp L.H , Hazard Warm Switch , Assy Indicator Lamp (Low Air Pressure) , Graduated Hand Control Valve , Oil Pressure Gauge , Water Temp Gauge , Fuel Gauge 24V , Assy Blinker Lamp Lh With Bulb , Heat Sink Assy (Aux ) , Spacer Ring (Swivel Head) , Megnetic Valve , Magnetic Valve (24 V) , Rotor Final Assy , Push Pull Switch , Kit For Electrical Wind Shield Washer , Door Handle With Key Rh , Assembly Door Lock Rh , Assy Crown Wheel And Pinion(37/7) , Synchroring (1/2/3 Carbon Lining) , Fuel Gauge , Temperature Gauge With A/C Cut Off , Assy Tail Lamp , Knock Sensor 25348220 Delphi , Stator , Ecu ( Transfer Case ) , Assy 240 Dia Cl Cover Luk India , 352 Dia Clutch Dis Assy , Releasing Bearing Costing Service Kit , Assy Front Shock Absorber , Assy Rubber Bellow , Set Of Main Bearing(Std) , Assy Con. Rod , Clamp Hose , Air Compressor , Minor Repair Kit Air Compressor , Repair Kit Piston Ring , Turbo Charger , Starter Motor 12 V , Fan , Viscous Fan 22 Inch , Valve Delivery , Rod Seal-1 , Rod Seal-2 , Rod Seal-3 , Rod Seal-4 , O Ring , Sealing Washer , Wiper , Quard Ring , Sealing Washer , Sealing Washer , Gasket , Plunger Seat , Square Ring , Oil Seal , O Ring , O Ring , Sealing Washer , Sealing Washer , Ssk For Manual Valve Rotary , Gasket Pto , Gasket Pump , Shifling Shoe , Rlf Catridger , Oil Strainer , Gasket , O Ring , Copper Washer , Bonded Seal , Hose Clamp , Bonded Seal , Gasket Cyl Hd , Gasket Oil Filter Housing , Impeller , Wire For Locking (Releasing To Sleeve) , Bushing (To Rear Spring Shackle) , Rear Spring Pin , Stud Bolt , Pressure Spring , Pressure Spring , Assy Cyl Head With Valves , Cyl Head , Crown Wheel Assy , Protective Cap Rubber , Rubber Fastner , Wiper Blade , Valve Seat Ring Exh Std , Inj Timer Device Assy , Shifting Fork , Starter Motor 12V , Hose Clip Screw Type , Parking Bulb Hl 12V4w Din 72601 , Main Bearing Set Std , Delivery Hose Cavas 38 Mmx20mm With Gm C , Multy Cylinder Pump , Pump Element , Delivery Valve Assy , Governor Assy , Assy Engine Mounting Front , Passenger/Driver Fan 24V , Piston Pin , Leaf 7Th , Assy Main Line Switch , Wiring Harness Main , Assy Cable Set , Assy Main Cable Set (Front To Tail ) , Rubber Hose , Instrument Cluster(1:0. 80)M/S Minda , Ins Cluster Ms Ii L , Shim 1.24 Mm Thk , Rubber Sealing Ring , Assy Strainer Oil Pump , Assy Fan (Borg Warner) , Rep Kit L.S.E.Coil , Repair Kit Solonoid Switch Minor , Locking Ring , Diode Plate Assyve , Field Coil , Regulator Assy 12V , Armature , Rotor Assy 12V , Assy Wiper Blade(Driver) , Horn(Low Tone)24V , Assy Blinker Lamp With Bulb Rh , Assy Combi Switch (Pec) , Wiring Harness Stop Lt Swand Lp Sw , Repair Kit Graduated Hand Brake Valve , Temperature Tranducer , Assy Ball Joint Top Wish Bone , Oil Seal Hub Outer(110X129x9) , Assy Bracket Rh On Eng Mtg Rear , 352 Dia Clutch Cover Assy , Water In Fuel Ind 12V/24V , Repair Kit Relay Valve , Turbo Charger , Bearing Bushing , Lamp H4 24V 75/70W (For Motorised Head L , Assy Aux Gear Box Completewith 8 Bolt , Assy 6Bt (125 Hp) Engine Complete With 3 , Assy Gbs-40 Gear Box , Assy Gear Box Gbs-50 , Assy Engine 4Sp Dicor Bs Iii(Assy Engine , Assy Rear Axle Complete , Assy Aux Gear Box Complete , Assy Front Axle Withouthub-4.56 (Std) , Assy G-76-5/3.86 Gear Box Complete , Assy Front Axle(Live) Complete With Brak , Engine Complete With 3Rv Liner Alternato , Engine Assy 6 Bt-5.9-145 Hp Engine Compl , Engine (697 Turbo Charger) , Assy Gear Box G 600 6/8. 47 Complete , Break Bleeding Tube , Brake Bleeding Hose , Regulator , Tail Light(Lh) 4 Chamber Rectangular , Assy Filter Element (Lumax) , Rectifire Assy , Speedo Cable 3.2Mm Dia 3000Mm Long (I.I. , Rear Wind Shield Rh , Assy Water Pump , Nozzle , Key Ring , Switch Key Ring , Laminated Passenger Door Glass , Assy Water Tank 55 Ltrs , Lock Nut , Release Bearing Assy , Cylinder Head Gasket( 1.7Mm Thick) , Priming Pump Hand , Repair Kit (Msp 3/62) Hand Control Valve , Clutch Sleeve With Brg , Filter Element , Regulator Handle , Front Spring Leaf 8Th , Assy First Leaf With Bush , Third Leaf , Sealing Ring , Wheel Cylinder Repair Kit (Bi) , Friction Washer , Universal Joint , Gear Ring , Clutch Release Sleeve With Bearing , Rear Axle Shaft Gear , Yoke Universal Joint , Transfer Label , Fuel Filter , Terminal Negative , Distributor Head , Joint Bushing , Speaker (Ahuja Make ) , Music System Cassette Player(Ahuja Make) , Flag Red Post Dia 20Mm Welded On Both Si , Pole Screw , Oil Seal , Cover Electronic Blinker Glass Lh , Gasket , Blinker Lamp Lh , Bulb 21 W Ts-29201 , Horn Electrical , Injector , Seal Kit(Valve Sleeve) , Transmission Mechanical Vehicular/Assy G , C.E. Bracket Assy , Axle Assy Automotive Driving , Sealing Gasket 0.50Mm Thk , Clutch Release Bearing , Alternator Assy With Double Gnved Pully , Oil Seal , Lamp 24 V 2W , Solenoid , Spacer Ring Swivel Head , Sump Packing , Spanner Deac 08X10 , Radiator Engine Coolant , Shaft Straight , Shaft Straight , Screw Banjo Connector , Ball Pivot , Steering Lever Left , Steering Lever Right , Stud Bolt (For Mtg Cyl Hd) , Hex Nut , V Belt (Cogged 980 Ig) , Bushing , Prefilter Sleve (Mfr Part No. 1450-410-0 , Assembly Door Lock Rh , Solenoid Switch , Field Coil Assy , Starter Motor(Rf 78M45) , C E Bush , Hose Plain , Air Compressor (Top Port) , Flasher(24 V) , Assy Comb Switch , Cover Filter , Assy Head Lamp With Bulb 24 V Offer , Rubber Hose (T Connector To Radiator) , Field Coil Assy , Bearing Bush Ce , Pole Screw , Thrust Collar , Terminal , Assy Canvas Cover , Air Filter Element Primary , Solenoid Switch , Brush Set (Insul Brush) , Solenoid Switch , Brush Gear Assy , Stainless Steel Bolt M6x20 Long With Nyl , Push Tap , Gasket , Stainless Steel Brush 5Cm Widthx20cm Wit , Bearing Bush Inter Bkt , Filter Fuel , Suction Hose Cavas 38Mmx30m With Gm Coup , Driven Disc&Cover Assy , Gasket Rear Axle Housing Cover , Fuse 8Din 72581 , Repair Kit Hyd Brake Wheel Cylinder , Cartridge Lub Oil Filter , Brake Drum Rear , Armature Assy , Drive Assy , Relay With 6 Pin , Fan , Rep Kit(For Wheel Cyl) , Brake Shoe Rear With Brake Lining , Locking Washer , Nut Wheel M20x2.5 , Piston Cup , Bushing Sleeve , Assy Rectangular Head Lamp Rh , Bulb D 12/3-21/6 Ts 29 201 , Assy Tail Light Four Chamber Lh , Assy Rear View Mirror (Outside) Rh (Luma , Assy Rear View Mirror (Outside) Lh (Luma , Wiper Motor , Stop Light Switch (Pec) , Regulator And Brush Box Assy , Brg Bush , Ignition Key , Tool Bag , Inspection Lamp With 10 Mtr Long Cable E , Speedometer , Solenoid Operated Valve , Sealing Kit , Cab Lifting Bar , Assy Pipe (To Air Gauge 2) , Grab Handle Lh , Assy Pipe , Grease Gun , Timing Device Piston , C E Bearing , Pushing Electromagnet , Solenoid , First Aid Kit , Electronic Flasher Kit , Electric Buzzer , Triangle Kit Bag/Small , Banjo Bolt A8n 15011 , Pressure Line Cyl No. 5 , Pressure Line 4Th Cyl , Spring Assy Leaf , Pressure Line 2Nd Cyl , Pressure Plate Assy , Oil Seal , Slave Cyl Clutch , Governor Shaft , Needle , Cylindrical Roller Brg , Repair Kit Water Pump Major , Insp Lamp With 10M Cable Comp W/Single , Three Way Fuel Lock , Gasket Cyl Head , Main Leaf With Bush , Cylinder Roller Bearing , Filter Fuel , Filter Fuel , Assy Tail Lamp Lh , Assy Tail Lamp Rh , Assy Spare Wheel Lifting Unit , Thermostate , Solenoid Switch , Fluid Container (Clutch) , Assy. Nozzle , Seal Sealing Ring , Assy 6Bt Aa-5.9-155 Hp Engine Complete , Sppaner Deac 13X17 , Wiper Motor24v
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 1
Jammu And Kashmir View Result →
36.
Agriculture #9144512 Technical Bid
Supply Of Artificial Insemination Equipments Of Sheep Goat , Artificial Insemination Equipments Of Goat / Sheep , Artificial Vagina Made Up Of Rigid Neoprene Body For Semen Collection Compatible With Caprine / Ovine Spp.Consisting Of Ram Vagina, 5 No. Of Ram Smooth Latex Vagina Liner, 8 No. Of Lubricant Flask, 1 No. Of Silicone Cone For Ovine-Caprine Vagina, 1 No. Of Protective Felt Cover For Vagina, 10 No. Of Graduated Collection Tube Made Up Of High-Grade Borosilicate Glass. , Photometric Analyzer Including Accessories Compatible For Goat Semen Assessment And For Concentration Measurement Of Semen Ejaculates. Instrument Should Read Direct Concentration And Absorbance. It Should Calculate The Volume Of Media To Be Added In Semen For Preparing The Semen Doses. It Should Have Attached Inbuilt Or Attached Printer Or Give The Measurement Of Semen Concentration And Dilutor To Be Added. The Equipment Should Be Pre Calibrated / Standardized For The Calculation Of Dilution Rate And Number Of Doses To Be Prepared Can Be Immediately Ascertained And A Printable Record For Future Use. Concentration Calculation – Absorption, Concentration, Extender Volume To Be Added And Number Of Doses To Be Prepared Should Be Calculated, Displayed And Printed With Sample Number, Date &Time. Photometer Should Perform Minimum 20 Readings Per Sample And Calculate The Average Result.The Dilutor Should Be Capable Of Creating More Than 20 Adapted And Personalized Programs. Should Have An Option To Take Print Results With Sample Number, Date & Time. The Diluter Should Be Supplied With The Photometer. The Diluter Should Be Able To Perform Accurate And Precise Liquid Handling And Automatic Dilutions, Up To 1 / 250000. , Automatic Straw Filling And Sealing Machine For Filling 0.25Ml And 0.5Ml Straws. It Should Be Able To Deal With Small Volume Of Semen, Machine Should Fill And Seal 1 Straw At A Time And 3500-4000 Straws Per Hour. There Should Be Vacuum Pump And Integrated Pressure Controller Device. The Equipment Must Be Quoted With All Additional Software And One Year Warranty Including Onsite Training & Installation. , Straw Printing Machine With Pc, Software Controlled With Printing Capacity 16000 To 18000 Straw / Hour, It Should Be With Bar Code Printing Facility And Operable At 4 Celsius, It Should Have Provision To Import And Export The Buck / Ram List In Text Format. It Should Have Automatic Ink Viscosity Control And Ink Bleed On Start Up. It Should Have Automatic Clean-Up Of System After Shut Down. It Should Have Provision For Indication For Any Warning / Fault With Message And Have Touch Screen Control Panel. It Should Have Option For Bold Printing, Character Width And Height Adjustment Control And Also Sequential / Batch Numbering And Barcodes Facility All Encased In A Stainless Steel Cabinet. The Equipment Must Be Quoted With All Additional Software And One Year Warranty Including Onsite Training & Installation. , Cold Handling Cabinet Horizontal Typewith Upper Cover Having Clear Visibility Inside To Monitor The Working Is Required. Defrosting Programming For 24 Hours Temperature Display – Led Three Digits And Clear With At Least 0.1C Read Off Accuracy In Measuring Range • Perspex Upper Lid For The Enhanced Visibility And Product Accessibility • Thermometer For Temperature Control And Reading • Refrigerator Unit At The Base Of The Case • Accessible Condenser Easy To Clean • Solid Trolley Bumper All Around The Perimeter • The Evaporation Temperature And Airflow Design For Equilibration Of Semen Straws Should Be Designed For Even Flow Of Air And Equal Temperature At Every Point Within The Cabinet. • Noise And Vibrations: The Vibration In Refrigerator Should Be Minimum During Equilibration, The Sound Level Generated By Running Refrigerator To Be Below 80 Db. The Equipment Must Be Quoted With All Additional Software And One Year Warranty Including Onsite Training & Installation. , Automatic Freezing Unit With Racks And Software For Semen Management .The Unit Shouldallow Programmable And Controlled Freezing Process In Accordance With Requirement Of Semen Sample Freezing Conditions Monitored In Real Time During The Freezing Process Directly On The Pc Screen, Stored And Later Printed On The Pc’S Printer, Display Temperature Of Semen And The Freezing Chamber In Comparison To The Theoretical Freezing Curve. At Any Time The Pc Can Be Connected Or Disconnected Not Affecting The Work Of This Freezing Unit. The Equipment Must Be Quoted With All Additional Software And One Year Warranty Including Onsite Training & Installation. , Semen Preservation And Storage Unit Consisting Of 10 Nos. Of Ln2 Cylinderswith Capacity Of 2L And1no. Ofln2 Cylinder Of 50L Capacity. , Container Of 40 Liters Capacity With 10 Canisters- 2 Levels And 20 Goblets 65Mmfor Semen Straw Storage And Transportation. , Straw Thawer With Thermometer And Basket For Thawing Frozen Sheep And Goat Semen. , Semen Straw Cutter Of High-Grade Quality Compatible With French Mini Straw. , A.I. Guns ( 10 Nos. ) For Cervical And Trans- Cervicalinsemination In Sheep / Goat Made Up Of Stainless Steel, Compatible With Universal Ai Sheaths ( 10, 000 Nos. ) Suitable For Caprine Mini Syringe. , 14 L Water Bath Stainless Steel With Cover For Maintenance And Holding Of Semen And Extender At Constant Temperature Before Dilution And Subsequent Processing. Made Of Stainless-Steel Conforming To Iso Standards And With Required Dimensions.Water Pump Circulation To Ensure Uniform Temperature In The Chamber. Thermostat Temperature Setting From 0- 50ºc. Stand For Minimum16 Baby Flask And 48 Test Tubes, Protection - Thermal Circuit Breaker. , Sheep Vaginal Speculum With Torch / Light And Spare Batteries.Speculum Made Of Stainless Steel With Lighting For Speculum, Lubing Gel 500 Ml Flask, 2.7 V Speculum.3 V Battery Box For 2.7 V Speculum Stemp-Lamps With A Total Weight Less Than 300 Grams. Should Be Made Of Good Quality Metal. Back Diameter Should Be 50 Mm, Base To Tip Length Should Be 200 Mm, Handle To Tip Should Be 220 Mm. The Speculum Should Have Provision For Holding Light ( Speculum Stemp-Lamp ) & Ai Gun Inside The Speculum, Body Should Be Smooth. , Thermos Flask For Semen Preservation And Transport , Compatible With French Mini Straw.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Ladakh View Result →
37.
Defence #9071352 AOC
Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products -Automatic Fire Detection System And Automatic Fire Warning System
Contract Date: Ref. Documents Contract Value : ₹ 2.98 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Andaman And Nicobar Islands View Result →
38.
Educational and Research Institute #9057562 Technical Bid
Procurement of Laboratory Reagents/Chemicals and Consumables for Viral Research & Diagnostic Laboratory(VRDL) Under Microbiology Deptt. of Fakhruddin Ali Ahmed Medical College & Hospital, Barpeta, Assam Lab. Reagent And Consumable Items : , 100-100 ?L Filter Tips ( With Duel Filter Tips And Specific Certificate ) : • Description 50-1000 ?L , Sterile And Pcr Clean , 10 Racks Of 96 Tips =960 Tips, • The Filter Tip Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. • They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. • Filter Tip Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications: - Molecular Biology –Microbiology – Cell Culture. • Filter Tip Range – Pre – Sterilized –Purity Certified –Single Tray Racks –Volume Range From 10 To 5, 000 ?L. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. • Informative Rack Labeling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tip From Refill Towers And Packs. , 100-1000 ?L Non Filter Tip ( With Lot Specific Certificate ) : • Description : Standard Colorless 100-1000 ?L , 2 Bags Of 500 Tips = 1, 000 Tips, • Preferably Optifit Tips With High –Quality Standards. ( Fully Autoclavable At 121° C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Option. • Optifit Tip Range –Extended And Wide –Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available • Purity Certified Single Tray Racks And Refill Packs – Single Tray Racks, Refill Packs, Refill Tower And Bulk Packages • Volume Range From 10?L To 10Ml , 200 ?L Filter Tips ( With Duel Filter Tips And Lot Specific Certificate ) : • Description : 2-200 ?L , Sterile And Pcr Clean , 10 Racks Of 96 Tips =960 Tips, • The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With And Pipetting Mode. • They Must Feature The Unique Air Grap That Leaves Additional Space Between The Sample And The Filter.This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. • Filter Tips Must Be Specified To Provide Protection For Contamination For Pipettes And Samples In The Following Application :- Molecular Biology – Microbiology – Cell Culture. • Filter Tip Range – Pre Sterilized – Purity Certified –Single Tray Racks – Volume Range From 10 To 5, 000?L. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase , Rnase , Human Dna And Endotoxins. • Informative Rack Labeling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , 200 ?L Non Filter Tips ( With Dual Filter Tips And Lot Specific Certificate ) : • Description : Standard Colorless 2-200 ?L , 2 Bags Of 500 Tips= 1, 000 Tips • Preferably Optifit Tips With High-Quality Standards. ( Fully Autoclavable At 121°C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Options. • Optifit Tip Range - Extended And Wide-Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available. • Purity Certified Single Tray Racks And Refill Packs - Single Tray Racks, Refill Packs, Refill Towers And Bulk Packages. • Volume Range From 10?L To 10Ml , 2-20 ?L Filter Tips ( With Dual Filter Tips And Lot Specific Certificate ) : • Description: 2-20 ?L, Sterile And Pcr Clean, 10 Racks Of 96 Tips = 960 Tips. • The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. • They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. • Filter Tips Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications:- Molecular Biology – Microbiology - Cell Culture. • Filter Tip Range - Pre-Sterilized - Purity Certified - Single Tray Racks - Volume Range From 10 To 5, 000?L. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. • Informative Rack Labelling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , 2-20 ?L Non Filter Tips ( With Lot Specific Certificate ) : • Description: Standard 2-20 ?L, 2 Bags Of 500 Tips = 1, 000 Tips. • Preferably Optifit Tips With High-Quality Standards. ( Fully Autoclavable At 121°C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Options. • Optifit Tip Range - Extended And Wide-Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available. • Purity Certified Single Tray Racks And Refill Packs - Single Tray Racks, Refill Packs, Refill Towers And Bulk Packages • Volume Range From 10?L To 10Ml. , 0.5-10 ?L Filter Tips ( With Dual Filter Tips And Lot.Specific Certificate ) : • Description: 0.5-10 ?L, Sterile And Pcr Clean, 10 Racks Of 96 Tips = 960 Tips, • The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. • They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. •Filter Tips Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications: - Molecular Biology - Microbiology-Cell Culture. • Filter Tip Range - Pre-Sterilized - Purity Certified - Single Tray Racks - Volume Range From 10 To 5, 000Pl. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. • Informative Rack Labelling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , 0.5-10 ?L Non Filter Tips ( With Lot Specific Certificate ) : • Description: Standard 2-20 ?L, 2 Bags Of 500 Tips 1, 000 Tips • Preferably Optifit Tips With High-Quality Standards. ( Fully Autoclavable At 121°C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Options. • Optifit Tip Range - Extended And Wide-Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available • Purity Certified Single Tray Racks And Refill Packs - Single Tray Racks, Refill Packs, Refill Towers And Bulk Packages • Volume Range From 10?L To 10Ml , 1.5 Ml Micro Centrifuge Tubes ( With Safe Lock Lid And Lot Specific Certificate ) : • Description: Safe-Lock Tubes, 1.5 Ml, Colorless, Pack Size: 500 • Hinged Safe-Lock Lid Prevents Unintentional Lid Opening During Incubation And Storage • Polypropylene Provides High Resistance To Chemicals, Mechanical Stress And Temperature Extremes • Manufactured Without Slip Agents, Blocides Or Plasticizers - Substances That Have Been Shown To Leach From Plastic Consumables Into The Sample And Negatively Affect Bio-Assay Results • G-Safe®: Exceptional Centrifugation Stability Up To 30, 000 × G • Guaranteed Functionality From -86 °C To 100 °C • Autoclavable ( 121 °C, 20 Min ) , 2 Ml Micro Centrifuge Tubes ( With Safe Lock Ild And Lot Specific Certificate ) : • Description: Safe-Lock Tubes, 2.0 Ml, Colourless, Pack Size: 500 • Hinged Safe-Lock Lid Prevents Unintentional Lid Opening During Incubation And Storage • Polypropylene Provides High Resistance To Chemicals, Mechanical Stress And Temperature Extremes. • Manufactured Without Slip Agents, Biocides Or Plasticizers - Substances That Have Been Shown To Leach From Plastic Consumables Into The Sample And Negatively Affect Bio-Assay Results • G-Safe®: Exceptional Centrifugation Stability Up To 30, 000 × G • Guaranteed Functionality From -86 °C To 100 °C • Autoclavable ( 121 °C, 20 Min ) , Autoclavable Bag ( Medium ) : Material: Pp Autoclavable. These Are Thick High Strength, High Temperature Resistant Autoclavable Bags. , Nitrile Gloves ( Small Size ) High Quality, Super Soft. Perfect Sensitivity And Comfort. Material: Nitrile : • 100 Purple Nitrile Exam Gloves / Box, Size Medium • Ambidextrous, 9.5, Beaded Cuffs To Prevent Roll-Down; Excellent Dexterity And Tactile Sensitivity With Textured Fingertips • Superior Quality, Aql 1.0 ( Exceeds The Astm 2.5 Standard For Critical Defects Or Pinholes ) • Astm Level: Passes Chemo ( Astm D6978-05 ) Tested For Use. • Options: 12 Color / Lengths & 6 Sizes Available • Cuff Style: Poignets Repliés • Material: Nitrile • Rightcycle: Yes • Textured: Textured Fingertips , Nitrile Gloves ( Medium Size ) High Quality, Super Soft. Perfect Sensitivity And Comfort. Material: Nitrile : • 100 Purple Nitrile Exam Gloves / Box, Size Medium • Ambidextrous, 9.5, Beaded Cuffs To Prevent Roll-Down; Excellent Dexterity And Tactile Sensitivity With Textured Fingertips • Superior Quality, Aql 1.0 ( Exceeds The Astm 2.5 Standard For Critical Defects Or Pinholes ) • Astm Level: Passes Chemo ( Astm D6978-05 ) Tested For Use. • Options: 12 Color / Lengths & 6 Sizes Available • Cuff Style: Poignets Repliés • Material: Nitrile • Rightcycle: Yes • Textured: Textured Fingertips , Nitrile Gloves ( Large Size ) High Quality, Super Soft. Perfect Sensitivity And Comfort. Material: Nitrile : • 100 Purple Nitrile Exam Gloves / Box, Size Medium • Ambidextrous, 9.5, Beaded Cuffs To Prevent Roll-Down; Excellent Dexterity And Tactile Sensitivity With Textured Fingertips • Superior Quality, Aql 1.0 ( Exceeds The Astm 2.5 Standard For Critical Defects Or Pinholes ) • Astm Level: Passes Chemo ( Astm D6978-05 ) Tested For Use. • Options: 12 Color / Lengths & 6 Sizes Available • Cuff Style: Poignets Repliés • Material: Nitrile • Rightcycle: Yes • Textured: Textured Fingertips , Latex Gloves ( Size 6.5 ) : • Fully Sterilized Latex Material Provides High Levels Of Contamination Protection • Hand-Specific, Disposable And A Natural Color • Textured Palm And Fingertips Enhance Grip And Tactile Sensitivity • Beaded Cuffs Add Strength To The Gloves Reducing The Risk Of Tearing • Easy Donning And Doffing • Made From Latex Sterilized With Gamma Radiation And Containing No Powder • Suitable For Use In Eu Gmp Iso Class 5 Grade A Or Higher Sterile Cleanrooms , Latex Gloves ( Size7 ) : • Fully Sterilized Latex Material Provides High Levels Of Contamination Protection • Hand-Specific, Disposable And A Natural Color • Textured Palm And Fingertips Enhance Grip And Tactile Sensitivity • Beaded Cuffs Add Strength To The Gloves Reducing The Risk Of Tearing • Easy Donning And Doffing • Made From Latex Sterilized With Gamma Radiation And Containing No Powder • Suitable For Use In Eu Gmp Iso Class 5 Grade A Or Higher Sterile Cleanrooms , Latex Gloves ( Size7.5 ) : • Fully Sterilized Latex Material Provides High Levels Of Contamination Protection • Hand-Specific, Disposable And A Natural Color • Textured Palm And Fingertips Enhance Grip And Tactile Sensitivity • Beaded Cuffs Add Strength To The Gloves Reducing The Risk Of Tearing • Easy Donning And Doffing • Made From Latex Sterilized With Gamma Radiation And Containing No Powder • Suitable For Use In Eu Gmp Iso Class 5 Grade A Or Higher Sterile Cleanrooms , Molecular Grade Ethanol 500Ml : • Appearance: Colourless Liquid • Solubility: 1 Ml Miscible In 1 Ml Of Water • Dnases: None Detected • Rnases: None Detected • Ftir ( Liquid Film ) : Matches With The Standard Pattern • Refractive Index ( N 20 / D ) : 1.355 -1.365 • Density ( At 25°C ) : 0.784 -0.794 G / Ml • Water ( K.F. ) : <= 0.2% • Assay ( Gc ) : Min, 99.80% , 70% Ethanol, 500Ml: • Appearance: Colourless Liquid • Solubility: Miscible In Water. • Boiling Point: -78°C • Density: -0.789 G / Ml At 25°C • Refractive Index ( N20 / D ) : -1.362 • Water ( By Karl Fischer ) : <= 0.2% • Residue On Evaporation : <= 0.001% • Dnases: None Detected • Rnases: None Detected • Assay ( Gc ) : Min. 99.80 % , Parafilm : Parafilm Is A Thermoplastic Self Sealing Film That Holds Moisture Loss To A Minimum And Offers Excellent Barrier Protection To The Content Of Tubes, Beakers, Flasks, Petri Dish, Vials, Etc. , Zip Lock ( Small ) : Material: Ldpe , Zip Lock ( Medium ) : Material: Ldpe , Zip Lock ( Large ) : Material: Ldpe , Cryo Vials 1.8 Ml ( With Lot Specific Certificate ) : • Preferably Cryochill Vials Which Provide Long Lasting And Robust Protection From Extremes Of Temperature. • Should Be Suitable For Use In The Vapour Phase Of Nitrogen, The Vials Should Be Designed For The Mechanical Freezer Also. • The Vials Must Meet Iata Requirement Of Withstanding Evacuation To 95 K Pascal Without Leaking And Are Suitable For Transport Of Diagnostic Specimen. • Material: Pp / Hdpe , R Nase Away / Out / Zap ( 250Ml ) : • Must Completely Removes Rnase Contamination From Glass And Plastic Surfaces • Must Excels At Removing High Levels Of Rnase Contamination Whereas Similar Products Fail • Proven Effective At Removing High Concentrations Of Dried-On Rnase A • Ideal For Cleaning Work Surfaces, Pipettors, And Equipment That Must Be Rnase-Free • Product Type: 250Ml Solution • Form: Liquid • Shipping Condition: Room Temperature , Delicate Task Wipers ( Tissue ) : Standard Size , Biohazard Disposable Bag 8X12:: Material: Pp Autoclavable. These Are Thick Have High Strength, Are High Temperature Resistant, Autoclavable Bags. They Are Clearly Labelled With Biohazard Warnings. Bright Red Colour For Quick Identification. , Biohazard Disposable Bag 12X 24 : Material: Pp Autoclavable. These Are Thick Have High Strength, Are High Temperature Resistant, Autoclavable Bags. They Are Clearly Labelled With Biohazard Warnings. Bright Red Colour For Quick Identification. , Rectified Spirit : 500Ml Pack Size , Chloroform : 500Ml Pack Size , 2-Propanol : 1000Ml Pack Size , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Yellow , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Red , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Blue , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Black , Storage Vial Capacity: 1Ml: ( Designed For Use With Samples From -80°C To 121°C. Dnase, Rnase, And Pyrogen-Free. Used For Storage Of Pcr Reagents, Enzymes And Other Diagnostics, Biochemical Reagents Or Samples. , Storage Vial Capacity: 2Ml: ( Designed For Use With Samples From -80°C To 121°C. Dnase, Rnase, And Pyrogen-Free. Used For Storage Of Pcr Reagents, Enzymes And Other Diagnostics, Biochemical Reagents Or Samples. , Storage Vial Capacity: 4.6Ml: ( Designed For Use With Samples From -80°C To 121°C. Dnase, Rnase, And Pyrogen-Free. Used For Storage Of Pcr Reagents, Enzymes And Other Diagnostics, Biochemical Reagents Or Samples. , Molecular Biology Grade Water ( 100Ml ) : D-Nase & R-Nase Free Water System , Laboratory Slipper , Absolute Alcohol : Pack Size:- 500Ml , Sample Bags 6”X13” , Sample Bags 9” X13” , Cryochill Vial Self-Standing Sterile, 2Ml , Single Channel Mechanical Pipette, 1-Ch, 0.1-3 ?: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 0.5-10 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 2-20 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 5-50 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 10-100 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 20-200 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 100-1000 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 500-5000 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 1000-10000 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Multi Channel Pipettes 8-Ch, 0.5-10 ?L.: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° Do-It-Yourself Calibration- Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Multi Channel Pipettes 8-Ch, 10-100 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° Do-It-Yourself Calibration- Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Multi Channel Pipettes 8-Ch, 30-300 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° Do-It-Yourself Calibration- Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Micro Amp Rtpcr Machine 96 Well Reaction Plate, For Thermo ( Abi ) Quantstudio 5 Machine Pack Size: 10 To 20 Plates / Pkt: • Frosted To Minimize Interfering Fluorescence From Wells Of Cycling Block • Screened To Eliminate Auto-Fluorescent Plates • Unique Design Provides A Barrier To Ambient Air To Help Ensure Well-To-Well Temperature Uniformity Color:Optical Material: Polypropylene Quantity: 10 To 20 Plates Size: 0.2 Ml No. Of Wells: 96 Reaction Speed: Standard Type: Microplate Format: 96-Well Plate Barcode: No Barcode , Micro-Seal B Pcr Plate Sealing Film, 25 To 100 / Pk ( Compatible With Bio-Rad Cfx 96 And Thermo ( Abi ) Qantstudio 5 ) : • Pressure-Sensitive Adhesive Provides A Tight Seal Over Every Well • Will Not Interfere With Sample Reading • Press-N-Seal: Align Properly To The Plate, Then Press To Seal • Easy To Apply-Will Not Stick To Your Glove Use This Optically-Clear Adhesive Film To Seal The Samples Into The Wells Of A Micro Plate. This Will Reduce The Possibility Of Cross-Contamination Between Sample Wells And Help Ensure Consistent Real-Time Pcr Data. Color: Optical Material: Polyester Type: Film, Seal, Or Applicator No. Of Wells: 96 No, Per Case: 25 Covers Shipping Condition: Room Temperature Adhesive: Pressure Sensitive Plate Compatibility: 96-Well Plates , Disposable Cap: This Material Is Preferred For Its Light Weight. Its Gravity Is Lighter Than Hydrophobic Pp Fibers So It Has Excellent Water Repellency And Air Permeability Resulting In Providing Comfort & Dryness Resulting In Anti Bacterial And Anti Fungal Resistance. Usage / Application: Hospital. Size: 21 Inch. Color: Green. Packaging Type: Hdpe Bag, Box. Gsm: 22-25. Pattern Best Quality And Iso Certified , Fogging Machine : Electrically Operated Aerial Fogging System. Power Supply: 220-240 Volts, 50 / 60 Hz Ac, 4.0 Amps Single Phase Supply. Continuous Duty Hour: 60 Minutes. Dimensions: ( Without Filter & Power Head Housing In Horizontal Position ) Length 300Mm & Width 280Mm, Height ( Blower Horizontal ) 460Mm Sound Level: Db<84 Db Chemicals Fogged: Disinfectants, Biocides, Fungicides, Pesticides, Anti Mildew Chemicals. Capacity Of Tank ( Net ) : 5.0 Liters Droplet Size: Ultra Fine ( Less Than 5 Micron ) Jet Throw In Closed Room: 40 Feet Distance, 25 Ft Height, ( Still Air Conditions ) Metering System: Adjustable ) : 0-90Ml / Minute Material Of Construction:Power Housing: Engineering Plastic Nozzle, Metering Valve Parts: Stainless Steel &Eng. Plastics Solution Tank Set: Stainless Steel &Eng. Plastics Tubing: Silicone Hardware Connectors: Stainless Steel Intake Filter Bag Type, Fits Over Rear Housing: Washable , Surface Disinfectant 3Rd / 5Th Generation Quaternary Ammonium Compound 1000Ml Composition: ? Polymeric Biguanide Hydrochloride < 10% ? Alkyl Dimethyl Benzyl Ammonium Chloride &Didecyl Dimethyl Ammonium Chloride < 10% ? Benefits: Aldehyde Free, Corrosion Free, Better Than 5Th Generation Qac Because Of Added Phmb ? Chlorine Free Formula, Excellent For White And Coloured Linen Suitable For All Surfaces, Furniture, Appliances, Dental & ? General Practice Environment ? Application ? Manual Cleaning ? Concentration: Non Infected 0.5%, Infected: 1% ? Soak Time: 15 Mins ? Temperature: Room Temperature ? Automatic Cleaning ? Concentration: Non Infected 0.5%, Infected: 1% ? Soak Time: 10 Mins ? Temperature: 70°C ? Surface Disinfection Critical Areas ? Method Of Application: Mopping / Wiping Floor, Walls, Furniture, Equipments, Operation Tables And Ot Lamps Dilution: 0.5% ( 5Ml Made Up To 1000Ml With Water ) ? Contact Time: 15 Min ? Surface Disinfection Non-Critical Areas ? Method Of Application: Mopping Of Waiting Halls, Corridors, Reception Areas, Tables, Chairs, Table Tops, Wards Etc ? Dilution: 0.5% ( 5Ml Made Up To 1000Ml With Water ) , 1% ( 5Ml Made Up To 1000Ml With Water ) For Heavy Load ? Contact Time: 5 Min-15 Min ? Spill Management Blood / Vomit / Other Body Fluid ? Method Of Application: Mopping Of Floor And Tables ? Dilution: 10% ( 100Ml Made Up To 1000Ml With Water ) . ? Contact Time: 5 Min ? Fogging ? Method Of Application: To Be Used For Every 1000 Cu.Ft In High Risk Areas Like Ot, Icu, Iccu, Nicu, Cath Lab , Akd ?Dilution: 0.5%-1% ( 5Ml-10Ml Made Up To 1000Ml With Water ) , ? Contact Time: 1 Hour ? Spectum: Mycobactericidal, Virucidal, Fungicidal, Bactericidal, Pseudomonacidal And Also Effective Against Hiv, Hbv ? & Mrsa , Sodium Hypochlorite, 1000Ml :Specific Gravity At 25°Cmin 1.175 Available Chlorine Min 11.50%Wt ( ±1% ) Total Alkali As Naohmax 1.45% , Colorstraw Yellow: Ph 11.1-11.19 , Falcon Tube ( 50 Ml ) Polypropylene, Transparent, Sterilized, : Pack Of: 500 , Test Tube ( 15 Ml ) Polypropylene, Transparent, Sterilized, : Pack Of: 501 , Plastic Beaker1000ml : ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Plastic Beaker500ml: ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Plastic Beaker250ml: ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Plastic Beaker100ml: ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Reversible Pcr Racks, : Pack Of: 06 , Utility Tray : 320X260x100 Mm ( Autoclavable, Polypropylene ) Pack Size: 06 , Conical Flask With Screw Cap ( Autoclavable ) , : 250 Ml Capacity , Drying Rack : No. Of Rack 30 , Float Rack : 1.5Ml X 8 Capacity , Funnel : ( Size Dia Mm 65 ) , Reversible Pcr Racks, : Pack Of: 06 Nos , Indicator Tape For Autoclave ( 1 X500 ) , Instrument Sterilizing Pan : ( 220X150x70 Mm ) , Pack Of: 02 , Measuring Beaker With Handle ( Autoclavable ) : 500 Ml Capacity , Measuring Beaker With Handle ( Autoclavable ) : 250 Ml Capacity , Measuring Cylinder : 100Ml Capacity , Measuring Cylinder : 500Ml Capacity , Storage Box Capacity 300: ( 75X62x117 Mm ) Pack Size: 04 , Wash Bottle : 250Ml Capacity ( Material Ldpe ) , Wash Bottle:500 Ml Capacity ( Material Ldpe ) , Roll Of Aluminum Foil , Autoclave Wrapping Paper For Wrapping Materials During Autoclaving , Tourniquet , Tissue Paper Roll : Use For Research Work , Cotton Thread Roll , Hand Sanitizer ( Chlorhexidine / Alcohol ) With Emollient And Moisturizer, 500 Ml , Multipurpose Labelling Tape Roll ( Size 075X500 ) , Cryo Tags These Labels Withstand Conventional And Cryogenic Storage Conditions. The Label Withstands Boiling Water Baths At 100°C And Dry Heat Upto 150°C Without Degrading. , 2Ml Pcr 8 Strips With Flat Caps ( 125 Strips Per Box ) Range Is Available In 8 Tube Strips Available In 0.2 Ml Clear Or White Tubes. There Is Choice Of Flat And Domed, And Ultra Clear Caps. They Are Suitable For 0.2 Ml Or 0.5 Ml Thermal Cycler Blocks. Clear Caps Suitable For Real Time Pcr. Thin Wall Design For Even Heat Transfer. Clean Room Production For Consistent Results. High Quality Amplification. Suitable For Traditional Pcr / Hot Start Pcr. Rnase / Dnase / Pyrogen Free. / Material: Pp , Rtpcr Plate For Bio-Rad Rtpcr Machine Model: Cfx96 Hard Shell 96 Well Plates ( 0.1 Ml ) , Low Profile, Thin Wall Shirted, White / Clear, Pack Size: 10 To 50 Plates / Pkt , Digital Thermo Meter Easy To Read, Fast Response, Small Size Thermometers. With 1Meter Waterproof Probe Digital Thermometer With Sensor Range In Celcius: -50-+110°C Resolution: 0.1°C Accuracy: 1°C Survey Cycle: 10 Sec Power Supply: 1.5V ( Lr44 ) Battery Standard Accessories: Operational Manual, 1 Pc 1.5Vlr44 Cell & One Pc Supporter , Spraying Bottle Pack Size: 1000 Ml , Blotting Paper, Pack Size: 100 Pieces , Micropipette Stand, Capacity: 5 , Self-Standing Holder Accommodates Most Major Brands Of Pi Petters.Material: Pmma , Autoclavable Bag ( Large ) , Pack Size: 100 Material: Pp Autoclava Ble. These Are Thick High Strength, High Temperature Resistant Autoclavable Bags. , Cry Boxpack Size : 4 , Cooling Rack ( 96 Well ) Handling System For Sample Set-Up, Protection, Transport, And Storage Of Sensitive Samples - Keep You Samples Safe Clear Temperature Indicator: Color Of Pcr Cooler Changes When Temperature Exceeds 7 °C Dry Incubation Technology Reduces Contamination Risk Of Samples Keeps An Entire 96-Well Pcr Plate Cold For More Than An Hour At 0 °C ( With Two-Hour Precooling At -20 °C ) For Safe Samples Application: Cooling Of Samples During Pcr Sample Preparation , Mct Rack, Place: 96, Pack Size: 06 , Pcr Rack, Place: 96, Pack Size: 06 , 0.2Ml Pcr Strips , Dna Ladder ( 50Bp ) - 500 / 250?L , Dna Ladder ( 100Bp ) - 500 / 250?L , Gel Red ( Nucleic Acid Stain / Gel Stain ) - 1Ml , Pcr Master Mix 2X- 100 Rxn , Conventional Pcr Primers , 2X Rtpcr Master Mix With Loading Dye- 100 Rxn , 6X Gel Loading Dye- 1Ml , 2X Qrt-Pcr Master Mix- 100 Rxn , Tetrasodium / Disodium Edta- Molecular Biology Grade- 100Gm , 10-100 ?L Filter Tips ( With Dual Filter Tips And Lot Specific Certificate ) Tips. The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. Filter Tips Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications: - Molecular Biology - Microbiology - Cell Culture. Filter Tip Range - Pre-Sterilized - Purity Certified - Single Tray Racks - Volume Range From 10 To 5, 000?L. 96 Tips In Convenient And Reusable Tray Racks. Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. Informative Rack Labelling Must Be Present To Enable Easy Tip Identification And Traceability. Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity, Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , Elisa Kit , Measles Virus A. Serum Sample –Igm Qualitative Elisa ( 96 Test ) B. Solid Phase Elisa C. Sensitivity =99% And Specificity =98% D. Certification : Who Gmp / Fda Or Niv / Cdc Recommended. , Rubella Virus A.Serum Sample- Igm Qualitative Elisa ( 96 Test ) B. Solid Phase Elisa C.Sensitivity =99% And Specificity =98% D. Certification: Who Gmp / Iso / Fda Or Niv / Cdc Recommended , Rota Virus A. Stool Sample- Antigen Elisa B. Solid Phase Elisa C. Sensitivity =99% And Specificity =98% D. Certification: Who Gmp / Iso / Fda Or Niv / Cdc Recommended , Hsv ( I & Ii ) Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Calbiotechor Any Other Company / Firm Sensitivity = 99% And Specificity = 98% Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation. , Hepatitis A Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Hepavase 2. Axyme 3. Immunovision Usa 4. Drg International Usa 5. Immunoshop Or Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Hepatitis B Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Axyme 2. Abbot 3. J.Mitraco.Pvt.Ltd ( Who ) 4. Bio-Rad Usaor Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Analytical Sensitivity 0.1Ng / Ml Certification:Who Gmp / Iso / Fda / Certification Or Niv / Cdc Recommendation , Hepatitis E Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) :1. Mp Diagnostic 2. Mb Ssrl Milano Italyor Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Hepatitis C Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Orthodiagnostics 2. J.Mitraco.Pvt.Ltd 3. Biorad Usaor Any Other Company / Firm. Should Detect Of All Hcv Genotypes Including The Genotypes 1, 1A &B Prevalent In India. Sensitivity = 99% And Specificity = 98% Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Hepatitis D Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. General Biological Corporation, Taiwan 2.Dsi, Sri Italyor Any Other Company / Firm Sensitivity = 99% And Specificity = 98% Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Leptospira Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Pan Bio Or Any Other Company / Firm Sensitivity = 99% And Specificity = 98% Certification: Ivd / Fda / Ce / Who Approved Or Niv / Cdc Recommendation , West Nile Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Focus Diagnostics 2. Pan Bio 3. In Biosor Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Certification: Who Gmp / Iso / Fda / Certification Or Niv / Cdc Recommendation , Pcr Kits: , Influenza Panel Real Time Pcr Kit [ Influenza A, Influenza A ( Pandemic H1n1 ) , Influenza A ( H3n2 ) , Influenza B ( With Subtypes Yamagata & Victoria ) Throat Swab / Nasopharyngeal Swab Specimen Qualitive Real Time Pcr Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Multiplex Rt-Pcr Kit For Respiratory Pathogen ( Virus: Influenza A, Influenza A ( H3n2 ) , Influenza B, Inf Pandemic ( H1n1 ) , Parainfluenza ( 1-4 ) , Enterovirus, Human Metapneumo Virus ( A + B ) , Human Respiratory Syncytial Virus, Adeno Virus, Human Rhino Virus, Human Boca Virus, Human Parecho Virus, Human Corona Virus ( Alpha And Beta ) ( Bacteria: Mycoplasma Pneumonia, Chlamydia Sp, Legionella Sp, Streptococcus Pneumoniae, Haemophilus Influenzae A-F ) Throat Swab / Nasopharyngeal Swab Specimen Qualitative Real Time Pcr Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Viral Meningitis Panel Real Time Pcr Kit ( Entero Virus, Epstein-Barr Virus, Hsv 1 & 2, Human Adeno Virus, Human Parecho Virus, Human Parvo Virus B19, Varicella Zoster Virus ] Serum / Csf Specimen Qualitative Real Time Pcr Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Viral Gastroenteritis Panel ( Rota Virus, Adeno Virus, Noro Virus, Astro Virus And Sapovirus ) Real Time Pcr Kit Serum / Plasmaspecimen Quantitative Real Time Pcr Kit Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Hepatitis C Virus Serum / Plasmaspecimen Quantitative Real Time Pcr Kit Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , 6. Hepatitis B Virus Serum / Plasma Specimen Quantitative Real Time Pcr Kit Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Assam View Result →
39.
Public Administrative Department #8994223 Technical Bid
Inviting Item Rate Of Spare Parts Vehicles Of Different Make Model Of Ujjain Muncipal Corporation , Tata Mint / Dicor1st Speed Gear , 2Nd Speed Gear , 3Rd Gear , 4Th Gear , 5Th Gear , Accelerator Pedal , Ace 1Ton Recliner Plastic Cover Assembly , Ace 1Tonplastic Reclinercover , Actuator Motor Mode / Heater , Adaptor Male Brake Pipe , Adjuster Assy. Lh / Rh , Air Filter Element , Air Intake Elbow , Air Mass Sensor Near Airfilter , Allen Head Screw , Alternator 12V , Alternator Belt , Anti Roll Bar Front , Assembly Auxillary Tank With Pressure Cap , Assembly Propeller Shaft , Assembly Tumble Seat Latch , Assly Ecu Mtg Bkt , Assly Front Bumper , Assly Front Pivot Bush ( Lower Link ) , Assly Front Seat Belt Complete Kit , Assly Front Seat Lh-Non Sba-Venture-Gx , Assly Main Silencer With Hanger , Assly Pivot Bush Rear Trailing Arm ( Axle , Assly Trailing Arm With Bush , Assycat Con , Assy Air Filter , Assy Anti Roll Bar Complete ( Front ) , Assy Arb Link , Assy Bracket Arb Mounting Frame , Assy Bracket For Heater Casing Mounting , Assy Bracket -Lh / Rh ( Rack And Pinion Mounting ) , Assy Bracket Stone Gaurd-Air Duct , Assy Bracket ( Cable Clamping ) , Assy Bracket-Parking Brake Cable Rear , Assy Brake Fluid Reservoir , Assy Bump Stopper Rear , Assy Caliper Brake Lh / Rh , Assy Clutch Control Mounting , Assy Co-Driver Seat , Assy Counter Shaft , Assy Cross Member , Assy Cyl Head Cover / Tappet Cover , Assy Cyl.Head With Valves Superace Bs-Iv , Assy Driver Seat , Assy Egr Pipe , Assy Egr Valve , Assy Engine Mount ( Front ) , Assy Engine Mount ( Rear ) , Assy Filler Neck , Assy Front Anti Roll Bar Complete , Assy Front Door Complete Lh / Rh , Assy Front Door Dust Seal , Assy Front Door Matt Complete Lh / Rh - Pain , Assy Front Panel , Assy Front Seat Belt Kit , Assy Front Seat Belt Kit Rh Complete Aut , Assy Front Seat Lh / Rh - Non Sba - High End , Assy Front Seat Toggle Clamp , Assy Front Seat Track Rh , Assy Front Wiper Kit , Assy Fuel Filter , Assy Fuel Pre-Filter , Assy Fuel Rail ( Delphi ) / Common Rail , Assy Fuel Tank , Assy Fuel Tank Complete , Assy Guide Channel Front , Assy Heat Shield , Assy High Pressure Hose , Assy High Pressure Pump ( Delphi ) , Assy Hose Heater Inlet , Assy Hose Heater Outlet , Assy Hose Suction , Assy Injector With Washer , Assy Intercooler , Assy Kit For Venture Eng Cooling Improve , Assy Latch With Links Lh / Rh , Assy Leaf-Screen , Assy Link Lh / Rh Subframe , Assy Lower Link Front Lh / Rh , Assy Manual Window Regulator Lh / Rh , Assy Oil Filter , Assy Oil Pump , Assy Pan Hard Bush , Assy Pan Hard Rod Support Tube , Assy Parking Brake Cable , Assy Parking Brake Cable Rear Rh , Assy Pivot Bush Rear Trailing Arm Fram , Assy Post Silencer With Hooks , Assy Power Steering Pump , Assy Rad. With Fan Motor Shroud , Assy Rear Pivot Bush Lower Link , Assy Rear Spring Parabolic , Assy Rear Spring Parabolic , Assy Release Bearing , Assy Reservoir Mounting Bracket , Assy Return Line , Assy Return Line Middle , Assy Return Line-Complete ( Lhd ) , Assy Return Line-Gear End , Assy Rr Spring Semi Elliptical , Assy Rubber Bushing ( Rear Leaf Spring ) , Assy Shackle ( Rear Spring ) , Assy Shock Absorber ( Rear ) , Assy Spare Wheel Knob , Assy Steering Wheel With Damper , Assy Strut Top ( Front Strut ) , Assy Subframe , Assy Thermostat , Assy Trailing Arm With Bush , Assy Tumble Seat Latch , Assy Turbocharger , Assy Vacuum Hose Engine End , Assy Vent Line ( Canister To Atm. ) , Assy Water Pump , Assy. 9 In Vacuum Booster With Tmc , Assy. 9 Inch Vacuum Booster With Tmc , Assy. Accelerator Pedal Complete , Assy. Air Deflector , Assy. Ball Joint , Assy. Bellow Set , Assy. Bkt. Lspv Mtg. On Frame , Assy. Bracket , Assy. Bracket ( Fuel Line Mtg. Rear ) , Assy. Bracket Air Deflector , Assy. Bracket Arb Mounting Front , Assy. Bracket Engine Mtg. , Assy. Bracket Floor , Assy. Bracket ( Pstg Line ) , Assy. Brake Fluid Reservoir Lhd , Assy. Brake Pedal Lever Complete , Assy. Catalytic Converter , Assy. Clamp Parking Cable Front - Pelica , Assy. Clutch Cable , Assy. Clutch Pedal Lever , Assy. Co-Driver Seat , Assy. Control Mounting Bracket , Assy. Control Mtg.Bracket ( Brakeclutch ) , Assy. Cooler Loop ( Radiator Front ) , Assy. Cooler Loop ( Reservoir End ) , Assy. Cross Member ( Front ) , Assy. Cross Member ( Fuel Tank Mtg. ) , Assy. Damper Mounting Plate - Rh , Assy. Damper Plate - Lh , Assy. Dust Cover Tube-Front Strut , Assy. Filler Neck , Assy. First Leaf With Bush , Assy. Front Arb With Ring , Assy. Front Axle Lh / Rh , Assy. Front Brake Hose , Assy. Front Parking Brake Cable , Assy. Fuel Lines ( For Na Engine ) , Assy. Fuel Tank , Assy. Fuel Tank Complete , Assy. Fuel Tank Welded. , Assy. Guide Plate Lh / Rh ( Rear Spring ) , Assy. High Pressure Line Lhd , Assy. Housing Set , Assy. Hp Hose , Assy. Inlet Pipe With Flexible Bellow , Assy. L.S.P.V. , Assy. Outlet Pipe ( Presilencer ) , Assy. Panhard Rod With Bush , Assy. Parking Brake Cable Front , Assy. Parking Brake Lever , Assy. Parking Cable Front , Assy. Pinion Set , Assy. Pipe , Assy. Pipe All Type , Assy. Power Steering Pump , Assy. Power Steering Reservoir , Assy. Pre Silencer , Assy. Propeller Shaft-Super Ace , Assy. Pull Rod , Assy. Rack And Pinion Rhd-Power Assisted , Assy. Radiator Bracket And Guard , Assy. Rear Antiroll Bar Complete , Assy. Rear Brake Hose , Assy. Rear Brake Lh 17.46 W / C , Assy. Rear Brake Lh Dia 254 , Assy. Rear Brake Rh 17.46 W / C , Assy. Rear Brake Rh Dia 254 , Assy. Rear Shock Absorber , Assy. Rear Spring Hanger Bracket - Rear , Assy. Return Line , Assy. Return Line ( Gear End ) , Assy. Return Line ( Reservoir End ) , Assy. Rubber Bellow , Assy. Rubber Grommet , Assy. Silencer , Assy. Spare Wheel Carrier , Assy. Steering Column , Assy. Steering Column ( Bs-Iv ) , Assy. Steering Gear Lhd ( Power ) , Assy. Steering Wheel ( 3 Spoke ) , Assy. Stg. Column Mtg. Bracket , Assy. Subframe Complete With Stone Guard , Assy. Suction Line ( Filter To Fip ) , Assy. Suction Line ( Filter To Tank ) , Assy. Tailpipe , Assy. Top Cup ( Strut Top ) , Assy. Tube ( Spare Wheel Mtg. ) , Assy. Tube From Lh T Connector To Lcrv , Assy. Tube From Primary Adapter To Lcrv , Assy. Twin L.C.R.V. , Assy. Vaccum Pipe I ( Nylon ) , Assy. Vaccum Pipe Ii ( Nylon ) , Assy. Vacuum Hose Pump End ( 1.4Ltr Rhd ) , Assy. Vacuum Pipe Pump End , Assy. Vapour Line ( Pump To Tpv ) , Back Plate Assy. Lh / Rh , Baffle , Ball Bearing , Beading , Beading For Pan , Bearing Block , Bellow Kit , Bolt , Booster Assembly , Booster Tmc Minor Kit , Bottom Bush , Bottom Cover With Brass Contact Ring , Bracket ( Acc. Cable Mtg ) , Bracket ( Fuel Heater Mtg. ) , Bracket ( Fuel Lines Support ) , Bracket ( Radiator Mounting ) , Bracket ( Spare Wheel Mtg. ) , Bracket Alternator , Bracket Rear Brake Hose Mtg. On Axle , Bracket Starter Motor , Brake Disc Dust Cover-Lh / Rh , Bump Stopper Front , Cable For Rear Leg Folding , Cable Seat Cam Actuator , Cable Seat Cam Actuator ( 7+D ) Layout , Caliper Assy.Lh / Rh , Camshaft ( Exhaust ) , Camshaft ( Intake ) , Camshaft Gear Rear , Carpet Skirt Lh / Rh , Cartridge Assembly Kit , Centre Bolt ( Rear Leaf Spring ) , Circlip Removal Tool / G65 / Pelican , Clamp ( Frt Arb Bottom Mtg ) , Clamp ( Pstg Hose ) , Clamp ( Rear Leaf Spring ) , Clamp For 2 Brake Lines , Clamp For Brake And Fuel Line , Clamping Bolt ( Stone Gaurd-Air Duct ) , Closing Plate - Parking Front Brake Cabl , Clutch Hose , Clutch Pedal , Clutch Plate , Clutch Release Lever , Coil Spring ( M / S Tc Springs ) , Column Assembly Collapsible -Mechanical , Connecting Rod , Connecting Rod Bearing , Connecting Rod Bush , Counter Bearing , Cover Sheet , Crank Sensor , Crankshaft Bearing , Crankshaft Gear , Crankshaft Key , Crankshaft With Pin W / O Bearing , Cup ( Front Arb ) , Cup Washer , Cyl Head Gasket , Diesel Filter Body , Diesel Filter Element , Diesel Tank Fuel Pump Assembly , Dis Microbus , Dis_Temp_Sensor , Double Ended Stud M6 , Dowel Pin , Drg. Assy. Suction Line ( Fuel Heater T , Drift / Circlip Fitment / Gb65 / Pelican , Drift / R-4D Dowel / 28180402 / G65 / Pel , Drift / R-4D Dowel / 28180402 / G65 / Peli , Drift / R-5D Dowel / 28180402 / G65 / Peli , Drive Shaft - Tcic , Drive Shaft Bearing , Dual Temperature Trtansducer , Dust Cover With Cup Assy , Dust Seal Cap , Ecu , Engaging Gear ( 1 / 2 ) , Engaging Gear 3 / 4 , Engine Cover Front , Engine Cover Rear-Hardpad Version-Pelica , Exhaust Cyl Head Valve , Exhaust Manifold , Feed Pipe Assy Long , Feed Pipe Asy Short , Feed Tube Assy. Left / Right , Fifth Leaf , Fifth Speed Gear - Tcic , First Leaf , Flange Bolt , Flange Yoke , Flywheel , Flywheel Bearing , Flywheel Ring , Folding Mechanism Plastic Cover Lh / Rh , Fourth Leaf , Front Brake Disc , Front Cabin Seat Belts W / O Switch Comple , Front Coil Spring ( 20Kgf / Mm ) , Front Door Primary Seal Lh / Rh , Front Door Waist Seal Outer Lh / Rh , Front Engine - Pvc Cover , Front Hub , Front Panel Outer , Front Pipe Assy Silencer , Front Shockup , Front Spring Seat Top , Fuel Hose , Fuel Tank Cap With Lock For Ace 1Ton Pic , Fueltank Strap And Rubber , Funnel - Brake Fluid Reservoir , Garnish - Front Panel , Gasket ( Intake Manifold ) , Gasket Manifold , Gear Cable , Glow Plug / Heater Plug , Glow Plug Strip / Heater Plug , Grommet Power Steering Hose , Guard ( Propeller Shaft ) , Handbrake Lever Lh / Rh , Hardened Washer - Strut Top. , Hardpad Clip , Heat Shield - Engine Cover Front , Heat Shield - Engine Cover Rear , Heat Shield - Oil Filling Cap , Heat Shield ( Load Body ) , Hex Fl Scr M6x12 , Hex Thin Nut - M10x1 , Hex.Bolt - Cylinder Head , Hexagon Flange Bolt M12x1.25X160 , High Pressure Hose , High Pressure Line , High Pressure Line ( Pump To Rail ) , High Temperature Warning Unit , Hla , Horn Pad , Hose ( Fuel Filler Neck ) , Hose Blow-By / Hose Pipe Oil Seprator , Hose Brake Fluid , Hose Brake Fluid Primary , Hose Brake Fluid Secondry , Hose Pipe Outlet , Hose Reservoir Primary , Hose Reservoir Secondry , Hose Pipe Inlet , Hose ( Oil Adapter To Oil Sump ) , Housing Assy. Kit , I Shaft Assembly Middle , Ibj Assy ( M / S Rane-59602404 ) , Ibj Assy. , Ibj Nut , Idler , Injector Claw / Lock , Inlate Cyl Head Valve , Inner Ball Joint Assy. Kit , Insert Moulded Plastic Cap , Insulation Engine Cover Front , Insulation Engine Cover Rear , Insulation Oil Filling Cap , Insulation Panel Engine Shield - Lhd , Intake Manifold , Intercooler Duct , Kit Adaptor , Kit Assy Front Door Outer Handle Lh / Rh , Kit Assy Lock Kit Set , Kit Assy Lock Set , Kit Minor Washer , Kit Minor Wheel Cyl. , Kit Nrv , Kit_Reverse_Guiding_System , Kit-Bleed Screw , Kit-Bleed Screw Per W / Cyl Assy , Kit-Bracketrubber Mount , Kit-Carrier Assy , Kit-Feed Tube Assy , Kit-Lever Pawl Lh Per Brake Assy-Lh / Rh , Kit-Lined Shoe Per Vehicle , Kit-Pad Assy With Shim , Kit-Screw Per Brake Assy , Kit-Shoe Hold Down Per Brake Assy , Kit-Springs Per Brake Assy , Kit-Wheel Cyl. ( Minor ) Per W / Cyl. Assy , Knob M8 , Leaf-Screen Trim , Link , Link - Inner Handle Lh / Rh , Link - Locking Knob Lh / Rh , Link - Solenoide Lh / Rh , Link Antiroll Bar , Link-Outer Handle , Lockable Fuel Filler Cap One Way , Lower I Shaft Assy , Lower Link Front Lh / Rh , Lower Shaft , Lower Shaft Assy , M8 Triple Start Knob , Main Shaft , Matt For Engine Cover Front , Mc Assy , Mc Kit Major , Mint 10 No. Nut , Mint 12 No. Bolt With Nut 3 , Mint 13 No. Nut , Mint 2.5 Clip , Mint 30205 Wheel Bearing , Mint 48548 Wheel Bearing , Mint Aade Nut Bolt , Mint Air Cleaner Hose Pipe , Mint Alternator Bolt With Nut , Mint Altinator Belt 5Pk0732 , Mint Arm Bolt , Mint Arm Me Bush Fitting , Mint Arm Thhiya Rear , Mint Balance Rod Balkin , Mint Balance Rod Bush Kit , Mint Balance Rod Patti , Mint Balance Rod Pin , Mint Balance Rod Rubber Bush , Mint Balance Rod Thhiya With Nut , Mint Balance Rod Woisher , Mint Barme 2, 2.5, 3.4 Soot 3 Long , Mint Block Lath Work , Mint Block Repairing , Mint Block Se Tute Bolt Nikalana , Mint Bolt 12 No. 2.5 , Mint Bolt 14 No. 1.5 , Mint Bolt 14 No. 3 , Mint Brake Caliper Bolt With Woisher , Mint Brake Disc , Mint Brake Master Cylinder , Mint Brake Pad , Mint Brake Pipe 10 No. Nut 1Ft Long , Mint Brake Pipe 10 No. Nut 6Ft Long , Mint Cam Bolt , Mint Cam Shaft Bolt , Mint Clutch Fark Lever , Mint Clutch Work Labour , Mint Commonrail Servicing , Mint Coolant Pipe Repairing , Mint Coolent Bottle , Mint Coolent Box , Mint Coolent Hosepipe , Mint Coolent Mainifold Pipe , Mint Coolent Plate , Mint Crank Bolt , Mint Crank Key , Mint Crank Oil Seal ( Front ) , Mint Crank Oil Seal ( Rear ) , Mint Crank Repairing , Mint Crank Servicing , Mint Crown Pinion , Mint Crown Pinion Repairing , Mint Crown Side Bearing , Mint Cylinder Pipe Complete , Mint Damru Pipe , Mint Diesel Fluide Pipe , Mint Diesel Main Pipe ( Baloon Type ) , Mint Diesel Overflow Pipe , Mint Diesel Return Tee , Mint Diffrential Handi , Mint Dog Kit , Mint Door Glass Handle , Mint Door Lock Screw , Mint Dowel , Mint Elbow Hose Pipe Complete , Mint Engine Block , Mint Engine Oil , Mint Engine Oil Chamber , Mint Engine Packing , Mint Fark Bush , Mint Fark Lever , Mint Fip Pump Repairing , Mint Flywheel Bolt , Mint Flywheel Cut Polish , Mint Front Glass Rubber Channel , Mint Front Hub Woisher , Mint Front Main Glass Fitting , Mint Front Shockup Spring , Mint Front Wheel Checknut , Mint Front Wheel Hub Oil Seal , Mint Full Engine Over Oiling , Mint Full Engine Servicing , Mint Gear 3Rd Hub , Mint Gear 3Rd Top Slu , Mint Gear Box Repairing , Mint Gear Box Servicing , Mint Gear Cable Lock , Mint Gear Chilam , Mint Gear Handi , Mint Gear Hosing , Mint Gear Hozing Welding , Mint Gear Lever Bush Kit , Mint Gear Main Oil Seal , Mint Gear Oil Seal , Mint Gear Poilet Bearing , Mint Gear Tapa , Mint Gear Tapa Kit , Mint Gear Tapa Repairing , Mint Half Yoke , Mint Half Yoke Opening Fitting , Mint Head Cam Cap , Mint Head Me Stat Ke Thread Banana , Mint Head Repairing , Mint Head Se Tute Bolt Nikalana , Mint Head Seat , Mint Head Servicing , Mint Head Stud 13 No. , Mint Hla Fitting , Mint Hose Pipe Assy. , Mint Hosepipe , Mint Hub Bearing Cone , Mint Hub Spacer , Mint Hub Thrust Woisher , Mint Hydraulic Jack ( Jack Well ) , Mint Hydraulic Motor Bearing , Mint Hydraulic Motor Repairing , Mint Hydraulic Pipe , Mint Injector Nozzel Coupler , Mint Injector Nozzel Servicing , Mint Injector Pump Repairing , Mint Intercooler Hose Pipe Repairing , Mint Intercooler Transmission Pipe , Mint Jack Pin , Mint Jack Seal Kit , Mint Jack Seal Polish , Mint Jack Tee , Mint Jack Tube Polish , Mint Kamani Bush , Mint Kamani Center Bolt 3 , Mint Kamani Center Bolt 4 , Mint Kamani Patta 34 , Mint Kamani Patta 39 , Mint Liner Slu , Mint Linking Rod , Mint Main Bearing , Mint Main Bearing Std , Mint Milometer Sensor , Mint Nozzle Bolt 12 No. , Mint Nozzle Lock Unlocking , Mint Nozzle Return Pipe , Mint Nozzle Valve , Mint Nut Bolt 12 No. 4 , Mint Oil Chamber Bolt , Mint Oil Chamber Packing , Mint Oil Cooler Ring , Mint Oil Diston , Mint Oil Guage Pipe , Mint Oil Jet Bolt , Mint Oil Jet Removing From Block , Mint Oil Pump Jaali , Mint Oil Pump Oil Seal , Mint Oil Seal Kit , Mint Packing Kit , Mint Pinion Bearing Big , Mint Pinion Bearing Small , Mint Pinion Oil Seal , Mint Piston Puller , Mint Piston Ring , Mint Popular Shaft Through Work , Mint Popular Shaft Uj Cross Fitting , Mint Power Steering Oil , Mint Power Steering Pipe , Mint Power Steering Pipe Repairing , Mint Pressure Plate Bolt , Mint Quil Pad , Mint Radiator Fan Assy. , Mint Radiator Foundation , Mint Rear Kamani Bush , Mint Rear Wheel Bolt , Mint Rejmal Patti ( Cloth ) , Mint Shockup Alter Bolt 17 No. , Mint Shockup Bolt , Mint Shockup Bolt Without Alter 17 No. , Mint Silencer Pipe With Jaali , Mint Slu , Mint Spendal ( Rhs ) Complete , Mint Steering Arm Bush , Mint Steering Arm Bush Fitting , Mint Steering Arm Bush Kit , Mint Steering Coupling , Mint Steering Cross Assy. , Mint Steering Cross Rod , Mint Steering Oil Pipe , Mint Steering Rack Repairing , Mint Steering Rod , Mint Suspenion Bracket With Nut , Mint Suspension Arm Bolt , Mint Suspension Arm Bush Kit , Mint Suspension Arm Bush Kit Fitting , Mint Suspension Arm Bush Woisher , Mint Suspension Arm Spring , Mint Suspension Linkages Bush , Mint Suspension Thhiya Rear , Mint Tapit Cover Packing , Mint Thermostate Valve , Mint Timing Cover , Mint Timing Oil Seal , Mint Tube 165 / D-14 , Mint Tube Valve , Mint Turbo Oil Pipe , Mint Turbo Packing , Mint Turbo Pipe , Mint Turbo Repairing , Mint Turbo Servicing , Mint Vaccume Pressure Pipe , Mint Vaccume Pump Plate , Mint Valve Joint Fitting , Mint Vehicle Scanning , Mint Water Coolent Pipe , Mint Water Jacket Pipe , Mint Wheel Bearing ( Big ) , Mint Wheel Bearing ( Small ) , Mint Wheel Bearing Fitting , Mint Wheel Jack , Mint Wiper Blade , Mounting Bracket , Mounting Bush , Mounting Clamp , Mounting Rubber , Needle Roller Bearing ( 1St Speed Gear ) , Needle Roller Bearing ( 2Nd / 3Rd Gear ) , Nozzle Piston Cooling , Nut-Pulley , O_ Ring All Size And Type , Obj Assy ( M / S Rane-59552407 ) , Obj Assy. With Nut , Offer Drg Assy Nylon Fuel Lines For Tc , Offer Drg. Assy. Rear Brake Hose , Offer Drg. Clamp For Brake Line , Offer Drg.Assy.Lspv , Offer Drg.Assy.Suction Line ( Tank To Wat , Oil Filling Cap / Tappet Cover Cap Plastic , Oil Pressure Switch , Oil Seal , Oil Seal ( Camshaft ) , Oil Separator , Omega Clip , Outer Ball Joint Assy. Kit , Outer Rear View Mirror Lh / Rh , Packing Foam ( Control Mtg. Bracket ) , Pad ( Spare Wheel Support ) , Pan Assy Rh , Panel Inner Front Door Lh / Rh ( Plastic Membrane ) , Panel Roof - Mb , Pin Front Cable , Piston Set , Pivot Pin , Pivot Pin / Brake Pin , Plenum Seal , Poly Vee Belt / Power Stg Belt , Power Steering Gear Assembly , Power Steering Pump , Power Steering Rack And Pinion Assembly , Pressure Plate , Pressure Port Connector , Prop. Shaft Assy , Propeller Shaft For Ace 1 Ton 2380 Wb , Pulley-Drive , Rack , Rear Brake Drum-254 Dia , Rear Coil Spring , Rear Pivot Pin Link Mtg , Rear Shockup , Rear Spring Pad , Recliner Cover Assy Rh , Regulating Glass Front Door Lh / Rh , Release Lever Assembly , Reservoir - Assy Power Steering , Reservoir Bracket , Retaining Ring ( Int ) , Retaining Washer , Retro Kit For C Clip And Sleeve , Rev. Gear / Shifter Sleeve , Reverse Idler Gear , Rocker , Rubber Bellow , Rubber Grommet For Leaf Trim Wiper , Rubber Hose All Type And Size , Rubber Joint Assy , Rubber Packing , Rubber Packing ( Fuel Tank Mtg Bkt ) , Rubber Seal For Wiper Mounting Lh / Rh , Seal Kit , Seal Oil Filling Cut Out , Seal Race ( Stub Axle ) , Seat Pan Insulation Rh-Lhd , Seat Skirt Rh , Second Leaf , Self Starter , Servo Assy , Shaft , Sheet Metal C Clip , Shifter Sleeve 3 / 4 , Short Gear Assy. Kit , Slip Yoke Assy. , Spacer , Spacer - Strut Top. , Spacer ( 1St Gear ) , Spacer ( Rear Pivot Mtg. ) , Spacer Panhardrod Axle End , Spacer Tube , Special Screw M6x20 , Split Pin , Spring , Spring ( For Accelerator Rod ) , Spring Seat Top ( Rear ) , Spring Seat Top ( Rear ) ( One Lug ) ( 33 Mm ) , Spring Seat Top ( Rear ) ( Two Lugs ) ( 37 Mm , Spring-Shoe Return ( Lower ) , Spring-Shoe Return ( Upper ) , Spring-Strut Return-Lhrh , Starter Motor 1.4Kw , Steering Column , Steering Gear Tierod Assy , Steering Gear W / O Tie Rod , Stone Gaurd ( Air Duct And Inter Cooler ) , Stone Guard ( Engine ) , Stopper , Strip Mudflap 1 Ton , Strutquadrant , Stub Axle Lh / Rh , Sub Assy.Strut Top , Suction Hose , Suction Port Connector , Synchrocone ( 3Rd / 4Th & 5Th Speed , Synchrocone 1 / 2 Speed , Tandem Master Cylinder Assy. , Taper Roller Bearing ( Inner ) , Taper Roller Bearing ( Outer , Tapper Roller Bearing , Temperature Sensor , Tension Pulley , Tensioner , Thermal Insulation Lh / Rh , Thermistor Evaporator , Thermo Amplifier , Third Leaf , Third Row Plastic Cover Ib Lh / Rh , Third Speed Gear , Thrust Woisher , Timing Belt , Timing Gear ( Fip ) , Timing Gear-Camshaft , Torsional Vibration Damper , Turn Bukle Nut , U Clamp , Uj Cross , Uj Kit , Upper Bush , Upper Column Assembly , Vacuum Modulator , Vacuum Pump Gasket , Vacuum Pump / , Valve Guide Intake-Exhaust , Valve Guide Oil Seal , Valve Spring , Vibration Damper , Vibration Damper ( Rear Axle ) , Washer , Washer - Cylinder Head Bolt , Washer All Type , Wheel Cylinder Assy Lh / Rh , Wheel Rim Assy , Windshield Glass Clear , Wiper Arm And Blade ( Co-Driver ) - Microbu , Wiper Arm And Blade ( Driver ) - Microbus ) , Tata Ace Mega 1St Speed Gear , 2Nd Speed Gear , 3 Rd Speed Gear , 4Th Speed Gear , Accelerator Pedal Module , Adapter;Hp Pump , Air Filter Element , Alternator Assy. 12 V , Alternator Cutont , Alternator Rottor , Assly Engine Mount ( Rear ) , Assy 7 Booster With Dia.22.22 Tandem Master Cylinder , Assy Air Filter , Assy Catcon , Assy Clutch Cable , Assy Counter Shaft , Assy Egr Cooler , Assy Fuel Control Unit , Assy Fuel Filter , Assy Fuel Tank , Assy Idoler , Assy Intercooler , Assy Oil Filter , Assy Oil Pump , Assy Oil Separator , Assy Speedo Gear ( 13 / 3 ) Plastic Ver. , Assy Tank Unit , Assy Tensioner , Assy Tubrochager , Aux.Water Tank , Balancer Shaft Assy , Brake Disc , Brake Liner Set , Brake Pad Set , Bush ( 1St Gear ) , Cam Sensor , Camshaft , Carrier ( 1 / 2 Speed ) , Carrier ( 3 / 4 / 5 Speed ) , Clutch Plate , Common Rail , Conn Rod Bearing , Connecting Rod , Coolant Temperature Sensor , Counter Bearing , Crank Sensor , Crankshaft Assy , Crankshaft Bearing , Cyl Crankcase Assy / Block , Cyl Head Cover , Cyl Head Gasket , Cylinder Head Assy With Valves , Cylinder Head Assy Without Valves , Diesel Filter Body , Diesel Filter Element , Diesel Tank Fuel Pump Assembly , Drive Shaft , Drive Shaft Bearing , Duct;Intercooler , Ecu , Engaging Gear ( 1 / 2 ) , Engaging Gear 3 / 4 , Engaging Gear 5Th Speed , Fifth Speed Gear , Front Hubm , Front Shockup , Fuel Filter Assy ;Main Filter , Fuel Return Pipe Assy , Fuel Suction Pipe Assy , Gasket Oil Pump , Gasket; Water Pump , Gasket;Cyl Head Cover , Gear - Crankshaft , Gear Cable , Gear, 2Nd Speed , Hp Pump Assy , Injector Assy , Main Shaft , Mega 10No Tapit Cover Stat , Mega 2.5 Center Bolt , Mega 30205 Wheel Bearing , Mega 48548 Wheel Bearing , Mega 5Pk 730 Belt , Mega 5Pk 767 Belt , Mega 5Pk 835 Belt , Mega Accelarator Paddle Coupler , Mega Accelerator Paddle ( Xl ) , Mega Air Cleaner Hose Pipe , Mega Air Pipe ( Tapid Cover ) , Mega Alternator Nut Bolt , Mega Axel Bearing , Mega Axel Repairing , Mega Axel Slu , Mega Axle Bearing , Mega Axle Bearing Openning Fitting , Mega Axle Seal , Mega Axle Stud , Mega Balancer , Mega Block Lathe Work , Mega Block Me Slu Lagakar Thread Banana , Mega Block Repairing , Mega Bolt Thread Making In Block , Mega Brake Caliper , Mega Brake Cliper , Mega Brake Lsp Valve , Mega Brake Master Cylinder Kit , Mega Brake Pipe , Mega Brkae Pipe ( Master Cylinder ) , Mega Bypass Pipe , Mega Cabin Front Glass , Mega Cabin Front Glass Fitting , Mega Cage Body Repairing , Mega Cage Body Servicing , Mega Cam Bolt , Mega Cam Setting , Mega Center Bolt 3 Soot 4 , Mega Chamber Bolt , Mega Clutch Fark , Mega Clutch Fark Lever , Mega Clutch Paddle , Mega Clutch Paddle Pin , Mega Common Rail Fuel Pipe , Mega Common Rail Service , Mega Commonrail Sensor , Mega Coolent Hose Pipe , Mega Coolent Plate , Mega Cr Bush , Mega Crank Key , Mega Crank Oil Seal Rear , Mega Crank Polish Rejmark Patti , Mega Crank Repairing , Mega Crank Sensor Coupler ( Xl ) , Mega Crdi Pipe , Mega Crown Pinion , Mega Crown Pinion Bearing , Mega Crown Pinion Bearing Fitting , Mega Crown Pinion Me Se Tute Hue Bolt Nikalana , Mega Crown Pinion Opening Fitting , Mega Crown Pinion Repairing , Mega Diesel Filter , Mega Diesel Filter Assy. , Mega Diesel Mainpipe Iron , Mega Diesel Motor Coupler , Mega Diesel Pipe , Mega Diesel Tank Pipe ( Inner ) , Mega Diesel Tank Pipe ( Outer ) , Mega Door Glass ( Lhs ) , Mega Door Glass Handle , Mega Door Glass Machine ( Lhs ) , Mega Door Lock , Mega Door Lock Screw , Mega Door Outer Handle ( Lhs ) , Mega Egr Pipe , Mega Egr Valve , Mega Engine Opening Fitting , Mega Fan Assy. , Mega Fark Bush , Mega Fip , Mega Fip Pump High Pressure Valve , Mega Fip Pump Thhiya , Mega Fip Service , Mega Flywheel Bearing , Mega Flywheel Ring , Mega Front Front Hub Oil Seal , Mega Front Kamani 30.5 Patta Clip Wala , Mega Front Kamani Bush , Mega Front Kamani Jhula ( Lhs ) , Mega Front Kamani Mada Patta , Mega Front Kamani Main Patta 41 , Mega Front Kamani Patta 22 6Th , Mega Front Show Jaali , Mega Front Show Panel , Mega Fuel Pump Slu ( Rotter ) , Mega Full Engine Servicing , Mega Gear Box Repairing , Mega Gear Cable Catcher , Mega Gear Cable Lock , Mega Gear Chilam , Mega Gear Handi , Mega Gear Hosing , Mega Gear Hosing Servicing ( Xl ) , Mega Gear Lever Bush Kit , Mega Gear Main Shaft Bearing , Mega Gear Mechanism , Mega Gear Mounting , Mega Gear Servicing , Mega Gear Tapa , Mega Gear Tapa Kit , Mega Gear Tapa Repairing , Mega Gear Thhiya Nut Bolt , Mega Half Engine Servicing , Mega Half Yoke Opening Fitting , Mega Head Bolt , Mega Head Bolt Ke Block Me Thread Making , Mega Head Bolt Nikalana , Mega Head Bolt With Woisher , Mega Head Dowel , Mega Head Elbow , Mega Head Facing , Mega Head Lathe Work , Mega Head Repairing , Mega Head Seat , Mega Head Service , Mega Head State Top Ghumana , Mega Head Stud , Mega Head Stud Me Slu Lagakar Thread Banana , Mega Head Valve , Mega High Pressure Valve , Mega Hose Pipe , Mega Hose Pipe Kit , Mega Hub Rear Nut Bolt 2 Long , Mega Hub Spacer , Mega Hydraulic Pipe , Mega Injector Coupler , Mega Injector Nozzle , Mega Injector Nozzle Service , Mega Intercooler Hose , Mega Jack Seal Kit , Mega Jack Tube Polish , Mega Kamani Patta 30 , Mega Kamani Patta 39 ( Xl ) , Mega Kit Fitting In Brake Master Cyinder , Mega Lift Cable ( 3 Core ) , Mega Lift Motor Repairing ( Xl ) , Mega Lift Switch Box , Mega Liner Slu , Mega Main Line Boring , Mega Main Oil Seal , Mega Nozzle Lock , Mega Nozzle Overflow Pipe , Mega Nozzle Pipe Commonrail To Pump , Mega Nozzle Servicing , Mega Nut Bolt 14 No. 1 Coller Wale , Mega Oil Chamber , Mega Oil Cooler Plate , Mega Oil Guage ( Inner ) , Mega Oil Hose , Mega Oil Jaali , Mega Oil Pipe , Mega Oil Pump Seal , Mega Oil Separator Pipe , Mega Packing Kit , Mega Pinion Bearing , Mega Pinion Bearing Small , Mega Pinion Nut , Mega Pinion Oil Seal , Mega Pinion Plate Unbending , Mega Piston , Mega Piston Ring , Mega Plastic Woisher , Mega Popular Shaft Pipe , Mega Popular Shaft Repairing , Mega Power Steering Belt ( Xl ) , Mega Pump Rottor , Mega Radiator Cap , Mega Radiator Fan Motor Assy. , Mega Radiator Fan Shroud , Mega Radiator Foundation , Mega Radiator Hose Pipe , Mega Radiator Hose Pipe ( Xl ) , Mega Rear Axel ( Lhs ) , Mega Rear Hub Oil Seal ( Inner + Outer ) , Mega Rear Kamani Aade Bolt 13 No ( Xl ) , Mega Rear Kamani Bush , Mega Rear Kamani Clip 2.5 ( Xl ) , Mega Rear Kamani Jhule Complete 24 No. Nut , Mega Rear Kamani Main Patta 38 , Mega Rear Kamani U Clamp 7 ( Xl ) , Mega Side Bearing , Mega Side Bearing Ki Seat Fitting , Mega Side Glass , Mega Silencer Elbow , Mega Silencer Gutke , Mega Silencer Jali , Mega Silencer Jali Complete , Mega Silencer Kothi Catalytic Covertor Assy. ) , Mega Silencer Kothi Se Bolt Nikalna , Mega Silencer Load Rubber Gutke , Mega Silencer Pipe ( Turbo To Silencer Jaali ) , Mega Silener Kothi Upper ( Near Turbo ) , Mega Slu Shim , Mega Star Bewel Woisher , Mega Steering Coloumn , Mega Steering Coloumn Bearing , Mega Steering Pump Oil Seal , Mega Tapit Coil , Mega Tapit Coin , Mega Tapit Cover Bolt 6 10 No. , Mega Tapit Cover Bolt Woisher , Mega Tapit Cover Cap , Mega Tapit Cover Slu Kit , Mega Tapit Katori , Mega Tapit Rubber , Mega Thermo Hose , Mega Thermostate O Ring , Mega Thread Making Of Pinion , Mega Timing Bolt , Mega Timing Cover , Mega Timing Gear ( Xl ) , Mega Timing Tensioner , Mega Tube 165D14 , Mega Turbo , Mega Turbo Air Pipe , Mega Turbo Hose Pipe , Mega Turbo Hose Return Pipe , Mega Turbo Ki Elbow , Mega Turbo Oil Pipe , Mega Turbo Repairing , Mega Turbo Stud , Mega Tyrod Assy. , Mega Vaccum Modulator , Mega Vaccume Pipe , Mega Valve Catcher , Mega Valve Oil Seal , Mega Valve Seat , Mega Water Elbow , Mega Wheel Bolt , Mega Wheel Cylinder , Mega Woisher , Mega Xl Crank Sensor , Mega Xl Master Cylinder With Booster Assy. , Needle Bearing ( 5Th Gear Main Shaft ) , Needle Roller Bearing ( 1St Speed Gear , Needle Roller Bearing ( 2Nd / 3Rd Gear , Needle Roller Bearing ( 2Nd / 3Rd Gear ) , Nozzle Assy, Piston Cooling ( Oiljet ) , Oil Cooler Assy , Oil Pressure Switch , Oil Seal ( Camshaft ) , Oil Seal ( Front Hub ) , Oil Seal-Crankshaft Front , Oil Sump Assy , Pressure Cap Assy , Pressure Plate , Propeller Shaft Assy , Radiator Assy , Rear Shockup , Release Bearing , Rev. Gear / Shifter Sleeve , Reverse Idler Gear , Roller Tappet Assy , Self 12 V Make Lucas , Self Starter , Service Indicator , Set-Valve - Intake & Exhaust , Shifter Sleeve ( 5Th Speed ) , Shifter Sleeve 3 / 4 , Steering Gear Box Assy , Synchrocone ( 3Rd / 4Th & 5Th Speed , Synchrocone ( 3Rd / 4Th & 5Th Speed ) , Synchrocone 1 / 2 Speed , Tappet , Thermostat Assy , Third Speed Gear , Thrust Woisher , Tie Rod Assy . , Timing Belt , Timing Gear; Camshaft , Uj Cross , Vacuum Pump Assy , Valve Guide , Vibration Damper , Water Pump Assy , Wiring Harness Engine , Wiring Harness Main , Eicher - 1095, 2016, 1075, 1090 Ei Air Compressure Repairing , Ei Diesel Filter F-983510 , Ei Suction Pump Jubaan Sp3l ( 4 Holes ) , Ei Sweeping Machine Pressure Jack Repair , Ei1075 Air Filter , Ei1075 Alternator Bearing Seat Making , Ei1075 Alternator Oil Pipe , Ei1075 Alternator Pump O Ring , Ei1075 Axle Packing , Ei1075 Brake Liner Fitting , Ei1075 Break Liner , Ei1075 Center Bearing Jhula , Ei1075 Center Joint Pipe , Ei1075 Center Motor Seal Kit , Ei1075 Clutch Paddle Bush Kit , Ei1075 Clutch Plate Facing , Ei1075 Clutch Plate Facing Fitting , Ei1075 Control Valve Kit , Ei1075 Control Valve Lever , Ei1075 Cut In Slu , Ei1075 Dog Kit , Ei1075 Drum Polish Cut , Ei1075 Flywheel Cut Polish , Ei1075 Hosing Bearing , Ei1075 Hub Sheem , Ei1075 Hyd. Bore In Plate , Ei1075 Hydraulic Jack Rod Repairing , Ei1075 Hydraulic Pipe 12Ft , Ei1075 Hydraulic Pump Hand Liver , Ei1075 Hydraulic Pump Motor , Ei1075 Kit Fitting In Master Cylinder , Ei1075 Lift Down & Lift , Ei1075 Lock Kit , Ei1075 Main Shaft Bearing , Ei1075 Master Cylinder Kit Major , Ei1075 Oil Seal Rear , Ei1075 Pressure Plate Cut Polish , Ei1075 Pto Cable , Ei1075 Survey Cylinder Kit , Ei1075 Survey Cylinder Kit Fitting , Ei1075 Survey Kit Major , Ei1075 Wheel Cylinder , Ei1095 -- 22 No Benjo Bolt With Woisher , Ei1095 -- Accelator End Make Eicher , Ei1095 -- Accelator Panja Make Eicher , Ei1095 -- Accelator Rod Make Eicher , Ei1095 -- Accelator Spring Make Eicher , Ei1095 -- Accelator Tann Make Eicher , Ei1095 -- Accelator Wire Make Pricol , Ei1095 -- Air Breather Machine Kit Majorjumbomake Tvs , Ei1095 -- Air Cleaner Assy Make Eicher , Ei1095 -- Air Cleaner Hose Make Rider , Ei1095 -- Air Cleaner Jaban , Ei1095 -- Air Cleaner Jaban Clip , Ei1095 -- Air Cleaner Ring Make Rider , Ei1095 -- Air Clener Clip Make Wikman , Ei1095 -- Air Duct Pipe Id201782 , Ei1095 -- Air Filter Body , Ei1095 -- Air Filter Cap , Ei1095 -- Air Filter Hose Pipe , Ei1095 -- Air Filter Make Eicher , Ei1095 -- Air Filter Ring , Ei1095 -- Air Meter Pressure Pipe Make Eicher , Ei1095 -- Air Pressure Meter-1 Make Make Eicher , Ei1095 -- Air Tank Brackat Patti Make Eicher , Ei1095 -- Air Tank Make Eicher , Ei1095 -- Air Tank Pipe Steel Make Eicher , Ei1095 -- Air Tank Pressur Machine Make Cd Tvs , Ei1095 -- Air Tank Rubber Make Rider , Ei1095 -- Air Tank Valve Make Cd Tvs , Ei1095 -- Air Tee Make Eicher , Ei1095 -- Axel Bolt Make Tvs , Ei1095 -- Axel Hub Pin ( Makkhi ) Make Track , Ei1095 -- Axel Ka Stud Make Tvs , Ei1095 -- Axel Packing Make Eicher , Ei1095 -- Axle Guide Pin Make Track , Ei1095 -- Axle Rear Jumbomake Eicher , Ei1095 -- Axle Rear Make Eicher , Ei1095 -- Banjo Bolt Make Mico , Ei1095 -- Block Dowel Pin , Ei1095 -- Block Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Ei1095 -- Brake Booster Kit , Ei1095 -- Brake Booster Repairing , Ei1095 -- Brake Cam Oil Seal , Ei1095 -- Brake Drum Front Make Eicher , Ei1095 -- Brake Gulli Make Track , Ei1095 -- Brake Hose Rear Make Cd Tvs , Ei1095 -- Brake Liner Gutka Make Track , Ei1095 -- Brake Liner Opening Fitting , Ei1095 -- Brake Liner Spring Make Track , Ei1095 -- Brake Lock Make Track , Ei1095 -- Brake Main Brake Pipe ( Tabe Ka ) Make Eicher , Ei1095 -- Brake Master Cylinder Assembly Make Tvs , Ei1095 -- Brake Master Cylinder Kit Major Jumbomake Tvs , Ei1095 -- Brake Master Cylinder Kit Make Tvs , Ei1095 -- Brake Master Cylinder Tee Make Tvs , Ei1095 -- Brake Oil Bottle Make Eicher , Ei1095 -- Brake Paddle Rubber Gutka Make Track , Ei1095 -- Brake Patti Make Track , Ei1095 -- Brake Pipe Front Make Randeep , Ei1095 -- Brake Pipe Master Cylinder To Brake Bottle Make Randeep , Ei1095 -- Brake Thali Nut Bolt Make Tvs , Ei1095 -- Brake Thali Rear Make Eicher , Ei1095 -- Brake Unloder Valve Machine Make Cd Tvs , Ei1095 -- Break Hose Front Make Tvs , Ei1095 -- Break Liner Guide Pin Spring Make Vsr , Ei1095 -- Break Liner Spring Make Track , Ei1095 -- Break Liner With Rivitfront Make Tvs , Ei1095 -- Break Liner With Rivit Rear Make Tvs , Ei1095 -- Break Pipe 1.25 Size Front Make Randeep , Ei1095 -- Break Pipe Steel Make Randeep , Ei1095 -- Cabin Khamba Lhs , Ei1095 -- Center Bolt 12 Long , Ei1095 -- Clip 6 , Ei1095 -- Clutch Adjuster Kit Make Eicher , Ei1095 -- Clutch Chimta Make Make Track , Ei1095 -- Clutch Cylinder Assy. Lower ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Assy. Lower ( Old Model ) Make Saini , Ei1095 -- Clutch Cylinder Assy. Upper ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Assy. Upper ( Old Model ) Make Saini , Ei1095 -- Clutch Cylinder Kit Lower Major ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Kit Lower Major ( Old Model ) Make Saini , Ei1095 -- Clutch Cylinder Kit Upper Major ( New Model ) Make Tvs , Ei1095 -- Clutch Cylinder Kit Upper Major ( Old Model ) Make Saini , Ei1095 -- Clutch Fork Make Eicher , Ei1095 -- Clutch Hub Make Eicher , Ei1095 -- Clutch Kit Lower Jumbo Majormake Tvs , Ei1095 -- Clutch Kit Upper Jumbo Majormake Tvs , Ei1095 -- Clutch Paddle Bush Make Eicher , Ei1095 -- Clutch Paddle Pin Make Eicher , Ei1095 -- Clutch Paddle Rubber Make Rider , Ei1095 -- Clutch Paddle Thhiya Complete , Ei1095 -- Clutch Plate Facing Make Eicher , Ei1095 -- Clutch Plate Jumbomake Eicher , Ei1095 -- Clutch Plate Ka Facing Jumbomake Eicher , Ei1095 -- Clutch Plate Make Eicher , Ei1095 -- Clutch Release Bearing Jumbomake Eicher , Ei1095 -- Clutch Release Bearing Make Eicher , Ei1095 -- Clutch Withdrawl Plate Jumbomake Eicher , Ei1095 -- Clutch Yoke , Ei1095 -- Coloumn Left Side , Ei1095 -- Compressure Belt , Ei1095 -- Crank Key , Ei1095 -- Ddu Machine Kit , Ei1095 -- Ddu Machine Kit Fitting , Ei1095 -- Diesel Filter Long Make Eicher , Ei1095 -- Diesel Filter Small Make Eicher , Ei1095 -- Diesel Main Pipe ( Rubber ) , Ei1095 -- Diesel Return Pipe , Ei1095 -- Diesel Tank Complite Make Eicher , Ei1095 -- Diesel Tank Dhakkan Make Eicher , Ei1095 -- Diesel Tank Jali Nut Make Eicher , Ei1095 -- Diesel Tank Patti Make Eicher , Ei1095 -- Diesel Tank Rubber Make Rider , Ei1095 -- Differentiol Cage Body Bolt Make Tvs , Ei1095 -- Differentiol Check Nut Make Gs , Ei1095 -- Differentiol Crown Bearing Side Wala Make Eicher , Ei1095 -- Differentiol Crown Cage Body Make Eicher , Ei1095 -- Differentiol Crown Check Nut Make Eicher , Ei1095 -- Differentiol Crown Spinder Kit Make Eicher , Ei1095 -- Differentiol Crown Thali With Pinion Make Eicher , Ei1095 -- Differentiol Pinion Bearing Make Eicher , Ei1095 -- Differentiol Pinion Flange Make Rds , Ei1095 -- Differentiol Pinion Oil Seal Make Rider , Ei1095 -- Differentiol Star Chowkdi Pin Make Eicher , Ei1095 -- Differentiol Star Chowkdi Make Eicher , Ei1095 -- Disel Pipe Main Steel Make Randeep , Ei1095 -- Disel Return Vave Make Mico , Ei1095 -- Disk Repairing 7.50X16 Make Genuine , Ei1095 -- Door Glass Mechine Make Eicher , Ei1095 -- Door Lock With Handle Make Eicher , Ei1095 -- Door Sliding Handle Lhs , Ei1095 -- Drum Polish , Ei1095 -- Engineideal Gear Bush Make Eicher , Ei1095 -- Enginekem Bush Make Eicher , Ei1095 -- Enginekem Shaft Chaabi Make Eicher , Ei1095 -- Engine A.C.Pipe Make Eicher , Ei1095 -- Engine A.C.Ring Make Eicher , Ei1095 -- Engine Aircompressure Kit Make Tvs , Ei1095 -- Engine Air Compressure Head Make Cd Tvs , Ei1095 -- Engine Begin Bearing Make Eicher , Ei1095 -- Engine Block Make Eicher , Ei1095 -- Engine Cam Shaft Make Eicher , Ei1095 -- Engine Connecting Bush Make Eicher , Ei1095 -- Engine Connecting Rod Make Eicher , Ei1095 -- Engine Crank Grinding, Polish , Ei1095 -- Engine Crank Make Eicher , Ei1095 -- Engine Crank Make Eicher , Ei1095 -- Engine Foudation Front Jumbo Make Rider , Ei1095 -- Engine Foudation Rear Jumbomake Rider , Ei1095 -- Engine Foundation Front Make Rider , Ei1095 -- Engine Foundation Rear Make Rider , Ei1095 -- Engine Gajan Pin Make Eicher , Ei1095 -- Engine Head Gaskit Make Eicher , Ei1095 -- Engine Head Guide, Headseat Opening Fitting And Griding Facing , Ei1095 -- Engine Head Head Valve Catcher Make Eicher , Ei1095 -- Engine Head Seat Make Eicher , Ei1095 -- Engine Head Stick Make Eicher , Ei1095 -- Engine Head Valve Cap Make Eicher , Ei1095 -- Engine Head Valve Guide Make Eicher , Ei1095 -- Engine Head Valve Make Eicher , Ei1095 -- Engine Head Valve Seal Make Eicher , Ei1095 -- Engine Head Valve Steel Cap Make Eicher , Ei1095 -- Engine Ideal Gear Make Eicher , Ei1095 -- Engine Lift & Down , Ei1095 -- Engine Liner Slu Make Tiger Power , Ei1095 -- Engine Main Bearing Make Eicher , Ei1095 -- Engine Mounting & Dismounting , Ei1095 -- Engine Oil Cooler Assy Make Eicher , Ei1095 -- Engine Oil Cooler Cluster Rear Make Eicher , Ei1095 -- Engine Oil Cooler Ring Make Eicher , Ei1095 -- Engine Oil Filter Make Eicher , Ei1095 -- Engine Oil Filter Plate Jumbomake Eicher , Ei1095 -- Engine Oil Filter Plate Nut Bolt Jumbomake Tvs , Ei1095 -- Engine Oil Filter Rear Make Eicher , Ei1095 -- Engine Oil Filter With Ring Jumbomake Eicher , Ei1095 -- Engine Oil Gage Make Eicher , Ei1095 -- Engine Oil Hose Pipe Make Eicher , Ei1095 -- Engine Oil Pump Make Eicher , Ei1095 -- Engine Oil Return Hose Pipe Make Eicher , Ei1095 -- Engine Oil Seal Front Make Eicher , Ei1095 -- Engine Oil Seal Rear Make Eicher , Ei1095 -- Engine Over Flow Pipe Return Make Mico , Ei1095 -- Engine Over Flow Valve Make Mico , Ei1095 -- Engine Packing Kit Make Eicher , Ei1095 -- Engine Piston Make Eicher , Ei1095 -- Engine Piston Ring Make Eicher , Ei1095 -- Engine Plate Rear Make Eicher , Ei1095 -- Engine Rocker Chiriya With Bush Make Eicher , Ei1095 -- Engine Rocker Push Rod Make Eicher , Ei1095 -- Engine Tapit Gas Pipe Make Eicher , Ei1095 -- Engine Thrust Voisher Make Eicher , Ei1095 -- Engine Water Pump Assembly Jumbomake Eicher , Ei1095 -- Engine Water Pump Assembly Make Eicher , Ei1095 -- Engine Water Separator Make Mico , Ei1095 -- Fan Belt Jumbomake Fenner , Ei1095 -- Feed Pump Assy. , Ei1095 -- Foot Door Lhs , Ei1095 -- Free Gear Bush , Ei1095 -- Frontwind Sheld Glass Air Make Atul , Ei1095 -- Frontwind Sheld Glass Rubber Channel Make Alp , Ei1095 -- Front Glass Fitting , Ei1095 -- Fry Wheel Nut Bolt Make Tvs , Ei1095 -- Fry Wheel Ring Make Eicher , Ei1095 -- Fuel Pump Repairing , Ei1095 -- Full Engine Servicing , Ei1095 -- Gear 1St Make Eicher , Ei1095 -- Gear 2Nd Make Eicher , Ei1095 -- Gear 3Rdeicher , Ei1095 -- Gear 4Th Make Eicher , Ei1095 -- Gear Bhogali Kit Make Vsr , Ei1095 -- Gear Box Hosing Bolt Big Make Tvs , Ei1095 -- Gear Changer Bhongle Kit Make Vsr , Ei1095 -- Gear Changer Kangni Make Eicher , Ei1095 -- Gear Counter Shaft Complete Make Eicher , Ei1095 -- Gear End Big Jumbo 20;16 Make Eicher , Ei1095 -- Gear End Small Jumbo 20;16 Make Eicher , Ei1095 -- Gear Foundation Make Rider , Ei1095 -- Gear Lever Changer , Ei1095 -- Gear Lever Danda , Ei1095 -- Gear Lever End Big Make Eicher , Ei1095 -- Gear Lever End Small Make Eicher , Ei1095 -- Gear Lever Jhula , Ei1095 -- Gear Lever Pipe Complete Make Eicher , Ei1095 -- Gear Lever Ring Make Eicher , Ei1095 -- Gear Lever Thiya Make Eicher , Ei1095 -- Gear Liver Bush Kit Naylon Make Eicher , Ei1095 -- Gear Liver End Complete Make Eicher , Ei1095 -- Gear Liver Make Eicher , Ei1095 -- Gear Liver Rod Steel Make Eicher , Ei1095 -- Gear Main Shaft Make Eicher , Ei1095 -- Gear Tapa Kit , Ei1095 -- Gear Tapa Repairing , Ei1095 -- Gear Top Shaft Make Eicher , Ei1095 -- Head Compressure Air Pipe 27 No. Nut , Ei1095 -- Head Compressure Benjo Tee , Ei1095 -- Head Compressure Oil Pipe , Ei1095 -- Head Compressure Repairing , Ei1095 -- Hydraulic Pipe , Ei1095 -- Hydraulic Pump , Ei1095 -- Injector Nozzle Over All Kit Make Mico , Ei1095 -- Injector Nozzle Pipe Make Eicher , Ei1095 -- Injector Nozzle Servicing , Ei1095 -- Injector Pump , Ei1095 -- Injector Pump Hosing , Ei1095 -- Injector Pump Over All Kit Make Mico , Ei1095 -- Injector Pump Piston , Ei1095 -- Injector Pump Rign , Ei1095 -- Injector Pump Servicing , Ei1095 -- Injector Pump Vain Pump , Ei1095 -- Inter Cooler Hose Pipe , Ei1095 -- Inter Cooler Hose Pipe Clip , Ei1095 -- Kamani 3 No. Patta Front Make Gs , Ei1095 -- Kamani 3 No. Patta Rear ( 1 ) Make Gs , Ei1095 -- Kamani 4 No. Patta Front Make Gs , Ei1095 -- Kamani 4 No. Patta Rear ( 2 ) Make Gs , Ei1095 -- Kamani 5 No. Patta Front Make Gs , Ei1095 -- Kamani 5 No. Patta Rear Make Gs , Ei1095 -- Kamani 6 No. Patta Front Make Gs , Ei1095 -- Kamani 6 No. Patta Rear Make Gs , Ei1095 -- Kamani A No. Patta Front Make Gs , Ei1095 -- Kamani A No. Patta Rear ( 3 ) Make Gs , Ei1095 -- Kamani Aade Nut Bolt Make Gs , Ei1095 -- Kamani B No. Patta Front Make Gs , Ei1095 -- Kamani B No. Patta Rear ( 4 ) Make Gs , Ei1095 -- Kamani Bolt And Nut Rear Make Gs , Ei1095 -- Kamani Bush Brass Make Gs , Ei1095 -- Kamani Bush Front Make Gs , Ei1095 -- Kamani Bush Rear Make Gs , Ei1095 -- Kamani Bush Rubber Make Gs , Ei1095 -- Kamani Center Bolt 7 Make Gs , Ei1095 -- Kamani Centre Bolt 6 Make Gs , Ei1095 -- Kamani Cup Bush Make Gs , Ei1095 -- Kamani Jhula Front Make Gs , Ei1095 -- Kamani Jhula Rear Make Gs , Ei1095 -- Kamani Mada Front Make Gs , Ei1095 -- Kamani Mada Rear Make Gs , Ei1095 -- Kamani Main Front Make Gs , Ei1095 -- Kamani Main Rear Make Gs , Ei1095 -- Kamani Pin Front Make Gs , Ei1095 -- Kamani Pin Rear Make Gs , Ei1095 -- Kamani Pin Rear Make Gs , Ei1095 -- Kamani Qvaterpin Make Gs , Ei1095 -- Kamani Thiya Bolt Nut Make Tvs , Ei1095 -- Kamani Thiya Front Make Gs , Ei1095 -- Kamani Thiya Rear Make Gs , Ei1095 -- Kamani U Clamp 14 Rear Make Gs , Ei1095 -- Kamani U Clamp 7 Front Make Gs , Ei1095 -- Kamani U Clamp Thiya Make Gs , Ei1095 -- King Pin Set Complete With Bearing, Bush, Pin Make Srmt , Ei1095 -- Main Line Boring , Ei1095 -- Main Line Switch , Ei1095 -- Mudpump Flanch Stud With Nut , Ei1095 -- Mudpump Impeller Nut , Ei1095 -- Nozzle , Ei1095 -- Nozzle O Ring , Ei1095 -- Nozzle Woisher , Ei1095 -- Nut Bolt 12 No. 1 , Ei1095 -- Oil Cooler Pipe , Ei1095 -- Oil Jet , Ei1095 -- Outer Handle Left Side , Ei1095 -- Pressure Plate Assembly Make Eicher , Ei1095 -- Pressure Plate Assy. Jumbomake Eicher , Ei1095 -- Pressure Plate Finger Kit Jumbomake Eicher , Ei1095 -- Pressure Plate Spring Jumbomake Eicher , Ei1095 -- Pressure Plate Tawa Jumbomake Eicher , Ei1095 -- Pro Seat Cover Fitting , Ei1095 -- Pro Seat Cushing Work , Ei1095 -- Pro Side Door Repairing , Ei1095 -- Propeller Shaft Centerbearingflange Jumbomake Rds , Ei1095 -- Propeller Shaft Center Bearing Bracket Make Eicher , Ei1095 -- Propeller Shaft Center Bearing Complete Eicher , Ei1095 -- Propeller Shaft Center Bearing Flanch Make Rds , Ei1095 -- Propeller Shaft Center Bearing Jumbomake Rds , Ei1095 -- Propeller Shaft Center Bearing Rubber Make Rider , Ei1095 -- Propeller Shaft Center Bearing Teeth Jumbomake Rds , Ei1095 -- Propeller Shaft Centre Bearing Teeth Make Rds , Ei1095 -- Propeller Shaft Cross Holder Jumbomake Rds , Ei1095 -- Propeller Shaft Cross Holder Make Rds , Ei1095 -- Propeller Shaft Cross Make Rds , Ei1095 -- Propeller Shaft Front Teeth Jumbomake Rds , Ei1095 -- Propeller Shaft Full Yog Make Rds , Ei1095 -- Propeller Shaft Nut Bolt 17 No. Make Tvs , Ei1095 -- Propeller Shaft Nut Bolt Jumbomake Tvs , Ei1095 -- Propeller Shaft Rear Teeth Make Rds , Ei1095 -- Propeller Shaft U.J.Cross Jumbomake Rds , Ei1095 -- Pto Flanch , Ei1095 -- Pto Pump , Ei1095 -- Pto Shaft , Ei1095 -- Push Rod Assy Make Eicher , Ei1095 -- Push Rod Kit Make Eicher , Ei1095 -- Radiator Bolt Spring Voisher With Nut Make Tvs , Ei1095 -- Radiator Cap , Ei1095 -- Radiator Fan Make Eicher , Ei1095 -- Radiator Filler Neck , Ei1095 -- Radiator Filter Neck , Ei1095 -- Radiator Foundation Make Rider , Ei1095 -- Radiator Hose Clip Make Wikman , Ei1095 -- Radiator Hose Pipe Set Jumbomake Rider , Ei1095 -- Radiator Hose Upper + Lower Make Rider , Ei1095 -- Radiator Thermostat Valve Make Eicher , Ei1095 -- Rivet 3 Soot Moti 1 Long , Ei1095 -- Side Door Glass Make Atul , Ei1095 -- Side Door Glass Rubber Channel Make Alp , Ei1095 -- Side Glass Make Somex , Ei1095 -- Side Glass Thhiya Make Vsr , Ei1095 -- Silencer Clip Make Gmi , Ei1095 -- Silencer Jaali Opening Fitting , Ei1095 -- Silencer Kothi With Packing Make Eicher , Ei1095 -- Silencer Packing ( Two Hole ) Make Eicher , Ei1095 -- Silencer Patti , Ei1095 -- Slu Opening Fitting , Ei1095 -- Steerin U Arm , Ei1095 -- Steering Bearing , Ei1095 -- Steering Box Bearing , Ei1095 -- Steering Chilam , Ei1095 -- Steering Cross Assembly Make Rds , Ei1095 -- Steering Oil Seal Big , Ei1095 -- Steering Oil Seal Small , Ei1095 -- Steering Rod Assy. Complete , Ei1095 -- Steering Verm Rod , Ei1095 -- Steering Warm Rod , Ei1095 -- Tapit Cover Ring , Ei1095 -- Tensioner Pully Assy. , Ei1095 -- Tie Rod Complete , Ei1095 -- Tie Rod End Make Rane , Ei1095 -- Timing Pully , Ei1095 -- Turbo Hose Pipe , Ei1095 -- Turbo Repairing , Ei1095 -- U Clamp 13 , Ei1095 -- Unloader Valve Machine Repairing , Ei1095 -- Unloadr Valve Machine Kit , Ei1095 -- Water Separetor , Ei1095 -- Wheel Alignment , Ei1095 -- Wheel Alignment Jumbo , Ei1095 -- Wheel Bearing Inner Front Make Eicher , Ei1095 -- Wheel Bearing Inner Rear Make Eicher , Ei1095 -- Wheel Bearing Outer Front Make Eicher , Ei1095 -- Wheel Bearing Outer Rear Make Eicher , Ei1095 -- Wheel Bolt & Nut Front N / M Make Gs , Ei1095 -- Wheel Bolt Front + Double Nut O / M Make Gs , Ei1095 -- Wheel Bolt Nut Rear N / M Make Gs , Ei1095 -- Wheel Bolt Rear + Double Nut O / M Make Gs , Ei1095 -- Wheel Cylinder Assembly Front N / M Make Tvs , Ei1095 -- Wheel Cylinder Assembly Front O / M Make Saini , Ei1095 -- Wheel Cylinder Assembly Rear N / M Make Tvs , Ei1095 -- Wheel Cylinder Assembly Rear O / M Make Saini , Ei1095 -- Wheel Cylinder Kit Front O / M Make Saini , Ei1095 -- Wheel Cylinder Kit Rear O / M Make Saini , Ei1095 -- Wheel Oil Seal Inner Front Make Eicher , Ei1095 -- Wheel Oil Seal Inner Rear Make Eicher , Ei1095 -- Wheel Oil Seal Outer Front Make Eicher , Ei1095 -- Wheel Oil Seal Outer Rear Make Eicher , Ei2016 Accelator End Make Eicher , Ei2016 Accelator Panja Make Eicher , Ei2016 Accelator Rod Make Eicher , Ei2016 Accelator Spring Make Eicher , Ei2016 Accelator Tann Make Eicher , Ei2016 Accelator Wire Make Pricol , Ei2016 Adopter , Ei2016 Air Breather , Ei2016 Air Breather Machine Kit Majorjumbo 20.16 Make Tvs , Ei2016 Air Cleaner Assy Make Eicher , Ei2016 Air Cleaner Hose Make Rider , Ei2016 Air Cleaner Ring Make Rider , Ei2016 Air Clener Clip Make Wikman , Ei2016 Air Filter Make Eicher , Ei2016 Air Meter Pressure Pipe Make Eicher , Ei2016 Air Pressure Meter-1 Make Make Eicher , Ei2016 Air Tank Brackat Patti Make Eicher , Ei2016 Air Tank Clip , Ei2016 Air Tank Make Eicher , Ei2016 Air Tank Pipe Steel Make Eicher , Ei2016 Air Tank Pressur Machine Make Cd Tvs , Ei2016 Air Tank Rubber Make Rider , Ei2016 Air Tank Valve Make Cd Tvs , Ei2016 Air Tee Make Eicher , Ei2016 Axel Bolt Make Tvs , Ei2016 Axel Hub Pin ( Makkhi ) Make Track , Ei2016 Axel Ka Stud Make Tvs , Ei2016 Axel Packing Make Eicher , Ei2016 Axle Guide Pin Make Track , Ei2016 Axle Rear Jumbomake Eicher , Ei2016 Axle Rear Make Eicher , Ei2016 Banjo Bolt Make Mico , Ei2016 Bearing 6009 , Ei2016 Bearing Nup-310 , Ei2016 Block Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Ei2016 Blower Pully , Ei2016 Blower Repairing , Ei2016 Brake Drum Front Make Eicher , Ei2016 Brake Gulli Make Track , Ei2016 Brake Hose Rear Make Cd Tvs , Ei2016 Brake Liner Gutka Make Track , Ei2016 Brake Liner Spring Make Track , Ei2016 Brake Lock Make Track , Ei2016 Brake Main Brake Pipe ( Tabe Ka ) Make Eicher , Ei2016 Brake Master Cylinder Assembly Make Tvs , Ei2016 Brake Master Cylinder Kit Major Jumbo 20.16 Make Tvs , Ei2016 Brake Master Cylinder Kit Make Tvs , Ei2016 Brake Master Cylinder Tee Make Tvs , Ei2016 Brake Oil Bottle Make Eicher , Ei2016 Brake Paddle Rubber Gutka Make Track , Ei2016 Brake Patti Make Track , Ei2016 Brake Pipe Front Make Randeep , Ei2016 Brake Pipe Master Cylinder To Brake Bottle Make Randeep , Ei2016 Brake Thali Nut Bolt Make Tvs , Ei2016 Brake Thali Rear Make Eicher , Ei2016 Brake Unloder Valve Machine Make Cd Tvs , Ei2016 Branded Bush Fitting , Ei2016 Break Booster Katora , Ei2016 Break Booster Kit , Ei2016 Break Booster Repairing , Ei2016 Break Hose Front Make Tvs , Ei2016 Break Liner Guide Pin Spring Make Vsr , Ei2016 Break Liner Spring Make Track , Ei2016 Break Liner With Rivitfront Make Tvs , Ei2016 Break Liner With Rivit Rear Make Tvs , Ei2016 Break Pipe 1.25 Size Front Make Randeep , Ei2016 Break Pipe Steel Make Randeep , Ei2016 Break Pressure Pipe , Ei2016 Cabin Lock , Ei2016 Catcher , Ei2016 Center Bearing Flanch , Ei2016 Center Bearing Nut , Ei2016 Center Bolt 22 No. 16 , Ei2016 Check Nut , Ei2016 Clutch Adjuster Kit Make Eicher , Ei2016 Clutch Chimta Make Make Track , Ei2016 Clutch Clavis , Ei2016 Clutch Cylinder Assy. Lower ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Assy. Lower ( Old Model ) Make Saini , Ei2016 Clutch Cylinder Assy. Upper ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Assy. Upper ( Old Model ) Make Saini , Ei2016 Clutch Cylinder Kit Lower Major ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Kit Lower Major ( Old Model ) Make Saini , Ei2016 Clutch Cylinder Kit Upper Major ( New Model ) Make Tvs , Ei2016 Clutch Cylinder Kit Upper Major ( Old Model ) Make Saini , Ei2016 Clutch Fork Make Eicher , Ei2016 Clutch Hub Make Eicher , Ei2016 Clutch Kit Lower Jumbo Major 20.16 Make Tvs , Ei2016 Clutch Kit Upper Jumbo Major 20.16 Make Tvs , Ei2016 Clutch Paddle , Ei2016 Clutch Paddle Bush Make Eicher , Ei2016 Clutch Paddle Pin Make Eicher , Ei2016 Clutch Paddle Rubber Make Rider , Ei2016 Clutch Plate , Ei2016 Clutch Plate Facing Fitting , Ei2016 Clutch Plate Facing Make Eicher , Ei2016 Clutch Plate Jumbo 20.16 Make Eicher , Ei2016 Clutch Plate Ka Facing Jumbo 20.16 Make Eicher , Ei2016 Clutch Plate Make Eicher , Ei2016 Clutch Release Bearing Jumbo 20.16 Make Eicher , Ei2016 Clutch Release Bearing Make Eicher , Ei2016 Clutch Withdrawl Plate Jumbo 20.16 Make Eicher , Ei2016 Coolent Box , Ei2016 Crank Cut Polish Maal Filling , Ei2016 Ddu Machine Kit Repairing , Ei2016 Ddu Maching Kit , Ei2016 Ddu Maching Kit Fitting , Ei2016 Diesel Filter Long Make Eicher , Ei2016 Diesel Filter Small Make Eicher , Ei2016 Diesel Tank Complite Make Eicher , Ei2016 Diesel Tank Dhakkan Make Eicher , Ei2016 Diesel Tank Jali Nut Make Eicher , Ei2016 Diesel Tank Patti Make Eicher , Ei2016 Diesel Tank Rubber Make Rider , Ei2016 Differentiol Cage Body Bolt Make Tvs , Ei2016 Differentiol Check Nut Make Gs , Ei2016 Differentiol Crown Bearing Side Wala Make Eicher , Ei2016 Differentiol Crown Cage Body Make Eicher , Ei2016 Differentiol Crown Check Nut Make Eicher , Ei2016 Differentiol Crown Spinder Kit Make Eicher , Ei2016 Differentiol Crown Thali With Pinion Make Eicher , Ei2016 Differentiol Pinion Bearing Make Eicher , Ei2016 Differentiol Pinion Flange Make Rds , Ei2016 Differentiol Pinion Oil Seal Make Rider , Ei2016 Differentiol Star Chowkdi Pin Make Eicher , Ei2016 Differentiol Star Chowkdi Make Eicher , Ei2016 Disel Pipe Main Steel Make Randeep , Ei2016 Disel Return Vave Make Mico , Ei2016 Disk Repairing 7.50X16 Make Genuine , Ei2016 Dog Kit , Ei2016 Door Glass Handle , Ei2016 Door Glass Mechine Make Eicher , Ei2016 Door Inner Handle ( Rhs+Lhs ) , Ei2016 Door Lock Thessi ( Rhs+Lhs ) , Ei2016 Door Lock With Handle Make Eicher , Ei2016 Door Ply , Ei2016 Engaging Gear , Ei2016 Enginekem Bush Make Eicher , Ei2016 Enginekem Shaft Chaabi Make Eicher , Ei2016 Engine A.C.Pipe Make Eicher , Ei2016 Engine A.C.Ring Make Eicher , Ei2016 Engine Aircompressure Kit Make Tvs , Ei2016 Engine Air Compressure Head Make Cd Tvs , Ei2016 Engine Bigen Bearing Make Eicher , Ei2016 Engine Block Make Eicher , Ei2016 Engine Cam Shaft Make Eicher , Ei2016 Engine Connecting Bush Make Eicher , Ei2016 Engine Connecting Rod Make Eicher , Ei2016 Engine Crank Grinding, Polish , Ei2016 Engine Crank Make Eicher , Ei2016 Engine Crank Make Eicher , Ei2016 Engine Foudation Front Jumbo 20.16 Make Rider , Ei2016 Engine Foudation Rear Jumbo 20.16 Make Rider , Ei2016 Engine Foundation Front Make Rider , Ei2016 Engine Foundation Rear Make Rider , Ei2016 Engine Gajan Pin Make Eicher , Ei2016 Engine Head Gaskit Make Eicher , Ei2016 Engine Head Guide, Headseat Opening Fitting And Griding Facing , Ei2016 Engine Head Head Valve Catcher Make Eicher , Ei2016 Engine Head Seat Make Eicher , Ei2016 Engine Head Stick Make Eicher , Ei2016 Engine Head Valve Cap Make Eicher , Ei2016 Engine Head Valve Guide Make Eicher , Ei2016 Engine Head Valve Make Eicher , Ei2016 Engine Head Valve Seal Make Eicher , Ei2016 Engine Head Valve Steel Cap Make Eicher , Ei2016 Engine Ideal Gear Bush Make Eicher , Ei2016 Engine Ideal Gear Make Eicher , Ei2016 Engine Liner Slu Make Tiger Power , Ei2016 Engine Main Bearing Make Eicher , Ei2016 Engine Oil Cooler Assy Make Eicher , Ei2016 Engine Oil Cooler Cluster Rear Make Eicher , Ei2016 Engine Oil Cooler Ring Make Eicher , Ei2016 Engine Oil Filter Make Eicher , Ei2016 Engine Oil Filter Plate Jumbo 20.16 Make Eicher , Ei2016 Engine Oil Filter Plate Nut Bolt Jumbo 20.16 Make Tvs , Ei2016 Engine Oil Filter Rear Make Eicher , Ei2016 Engine Oil Filter With Ring Jumbo 20.16 Make Eicher , Ei2016 Engine Oil Gage Make Eicher , Ei2016 Engine Oil Hose Pipe Make Eicher , Ei2016 Engine Oil Pipe , Ei2016 Engine Oil Pump Make Eicher , Ei2016 Engine Oil Return Hose Pipe Make Eicher , Ei2016 Engine Oil Seal Front Make Eicher , Ei2016 Engine Oil Seal Rear Make Eicher , Ei2016 Engine Over Flow Pipe Return Make Mico , Ei2016 Engine Over Flow Valve Make Mico , Ei2016 Engine Packing Kit Make Eicher , Ei2016 Engine Piston Make Eicher , Ei2016 Engine Piston Ring Make Eicher , Ei2016 Engine Plate Rear Make Eicher , Ei2016 Engine Rocker Chiriya With Bush Make Eicher , Ei2016 Engine Rocker Push Rod Make Eicher , Ei2016 Engine Tapit Gas Pipe Make Eicher , Ei2016 Engine Thrust Voisher Make Eicher , Ei2016 Engine Water Pump Assembly Jumbo 20.16 Make Eicher , Ei2016 Engine Water Pump Assembly Make Eicher , Ei2016 Engine Water Separator Make Mico , Ei2016 Fan Belt Jumbo 20.16 Make Fenner , Ei2016 Frontwind Sheld Glass Air Make Atul , Ei2016 Frontwind Sheld Glass Rubber Channel Make Alp , Ei2016 Front Brake Richit , Ei2016 Fry Wheel Nut Bolt Make Tvs , Ei2016 Fry Wheel Ring Make Eicher , Ei2016 Gear 1St Make Eicher , Ei2016 Gear 2Nd Make Eicher , Ei2016 Gear 3Rd Make Eicher , Ei2016 Gear 4Th Make Eicher , Ei2016 Gear Bhogali Kit Make Vsr , Ei2016 Gear Box Hosing Bolt Big Make Tvs , Ei2016 Gear Changer Bhongle Kit Make Vsr , Ei2016 Gear Changer Kangni Make Eicher , Ei2016 Gear Counter Shaft Complete Make Eicher , Ei2016 Gear End Big Jumbo 20;16 Make Eicher , Ei2016 Gear End Small Jumbo 20;16 Make Eicher , Ei2016 Gear Foundation Make Rider , Ei2016 Gear Lever End Big Make Eicher , Ei2016 Gear Lever End Small Make Eicher , Ei2016 Gear Lever Pipe Complete Make Eicher , Ei2016 Gear Lever Ring Make Eicher , Ei2016 Gear Lever Thiya Make Eicher , Ei2016 Gear Liver Bush Kit Naylon Make Eicher , Ei2016 Gear Liver End Complete Make Eicher , Ei2016 Gear Liver Make Eicher , Ei2016 Gear Liver Rod Steel Make Eicher , Ei2016 Gear Main Shaft Make Eicher , Ei2016 Gear Main Shaft Opening Fitting , Ei2016 Gear Top Shaft Make Eicher , Ei2016 Half Yoke Fitting , Ei2016 Hydraulic Jack Repairing , Ei2016 Injector Nozzle Over All Kit Make Mico , Ei2016 Injector Nozzle Pipe Make Eicher , Ei2016 Injector Pump Over All Kit Make Mico , Ei2016 Jetting Crank Pin , Ei2016 Jetting Crank Seat Making , Ei2016 Jetting Head Ss Valve , Ei2016 Jetting O Ring , Ei2016 Jetting Oil Ring , Ei2016 Jetting Ring , Ei2016 Jetting Woisher , Ei2016 Jumbo Pressure Tank Bracket , Ei2016 Kamani 3 No. Patta Front Make Gs , Ei2016 Kamani 3 No. Patta Rear ( 1 ) Gs , Ei2016 Kamani 4 No. Patta Front Make Gs , Ei2016 Kamani 4 No. Patta Rear ( 2 ) Make Gs , Ei2016 Kamani 5 No. Patta Front Make Gs , Ei2016 Kamani 5 No. Patta Rear Make Gs , Ei2016 Kamani 6 No. Patta Front Make Gs , Ei2016 Kamani 6 No. Patta Rear Make Gs , Ei2016 Kamani A No. Patta Front Make Gs , Ei2016 Kamani A No. Patta Rear ( 3 ) Gs , Ei2016 Kamani Aade Nut Bolt Make Gs , Ei2016 Kamani B No. Patta Front Make Gs , Ei2016 Kamani B No. Patta Rear ( 4 ) Make Gs , Ei2016 Kamani Bolt And Nut Rear Make Gs , Ei2016 Kamani Bush Brass Make Gs , Ei2016 Kamani Bush Front Make Gs , Ei2016 Kamani Bush Rear Make Gs , Ei2016 Kamani Bush Rubber Make Gs , Ei2016 Kamani Center Bolt 7 Make Gs , Ei2016 Kamani Centre Bolt 6 Make Gs , Ei2016 Kamani Cup Bush Make Gs , Ei2016 Kamani Jhula Front Make Gs , Ei2016 Kamani Jhula Rear Make Gs , Ei2016 Kamani Mada Front Make Gs , Ei2016 Kamani Mada Rear Make Gs , Ei2016 Kamani Main Front Make Gs , Ei2016 Kamani Main Rear Make Gs , Ei2016 Kamani Pin Front Make Gs , Ei2016 Kamani Pin Rear Make Gs , Ei2016 Kamani Pin Rear Make Gs , Ei2016 Kamani Qvaterpin Make Gs , Ei2016 Kamani Thiya Bolt Nut Make Tvs , Ei2016 Kamani Thiya Front Make Gs , Ei2016 Kamani Thiya Rear Make Gs , Ei2016 Kamani U Clamp 14 Rear Make Gs , Ei2016 Kamani U Clamp 7 Front Make Gs , Ei2016 Kamani U Clamp Thiya Make Gs , Ei2016 King Pin Set Complete With Bearing, Bush, Pin Make Srmt , Ei2016 Lock Thessi Screw 4 Point , Ei2016 Main Shaft Bolt , Ei2016 New Bolt Fitting After Top Making , Ei2016 Niddle Bearing , Ei2016 Nut Bolt 2 13 No. , Ei2016 Nut Bolt 2 19 No. , Ei2016 P.T.O. Foundation , Ei2016 P.T.O. Gear , Ei2016 P.T.O. Gear Pin , Ei2016 P.T.O. Oil Ring , Ei2016 Paddle Bush Kit , Ei2016 Pinion Shaft , Ei2016 Popular Shaft , Ei2016 Press Propeller Shaft Pipe 4.5 Ft , Ei2016 Pressure Plate Assembly Make Eicher , Ei2016 Pressure Plate Assy. Jumbo 20.16 Make Eicher , Ei2016 Pressure Plate Chawal Bearing , Ei2016 Pressure Plate Cut Polish , Ei2016 Pressure Plate Finger Kit Fitting , Ei2016 Pressure Plate Finger Kit Jumbo 20.16 Make Eicher , Ei2016 Pressure Plate Spring Jumbo 20.16 Make Eicher , Ei2016 Pressure Plate Tawa Jumbo 20.16 Make Eicher , Ei2016 Pressure Polish Kit , Ei2016 Propeller Shaft Center Bearing Bracket Make Eicher , Ei2016 Propeller Shaft Center Bearing Complete Eicher , Ei2016 Propeller Shaft Center Bearing Flanch Make Rds , Ei2016 Propeller Shaft Center Bearing Flange Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Center Bearing Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Center Bearing Rubber Make Rider , Ei2016 Propeller Shaft Center Bearing Teeth Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Centre Bearing Teeth Make Rds , Ei2016 Propeller Shaft Cross Holder Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Cross Holder Make Rds , Ei2016 Propeller Shaft Cross Make Rds , Ei2016 Propeller Shaft Front Teeth Jumbo 20.16 Make Rds , Ei2016 Propeller Shaft Full Yog Make Rds , Ei2016 Propeller Shaft Nut Bolt 17 No. Make Tvs , Ei2016 Propeller Shaft Nut Bolt Jumbo 20.16 Make Tvs , Ei2016 Propeller Shaft Rear Teeth Make Rds , Ei2016 Propeller Shaft Teeth Opening Fitting , Ei2016 Propeller Shaft U.J.Cross Jumbo 20.16 Make Rds , Ei2016 Pto Bearing 6206 , Ei2016 Pto Gear Box Foundation , Ei2016 Pto Gear Shaft , Ei2016 Pto Shaft Thread Making , Ei2016 Push Rod Assy Make Eicher , Ei2016 Push Rod Kit Make Eicher , Ei2016 Radiator Bolt Spring Voisher With Nut Make Tvs , Ei2016 Radiator Fan Make Eicher , Ei2016 Radiator Foundation Make Rider , Ei2016 Radiator Hose Clip Make Wikman , Ei2016 Radiator Hose Pipe Set Jumbo 20.16 Make Rider , Ei2016 Radiator Hose Upper + Lower Make Rider , Ei2016 Radiator Thermostat Valve Make Eicher , Ei2016 Reduser 1X3 / 4 , Ei2016 Shaft Se Tute Bolt Nikalna , Ei2016 Side Door Glass Make Atul , Ei2016 Side Door Glass Rubber Channel Make Alp , Ei2016 Side Glass Make Somex , Ei2016 Side Glass Thhiya Make Vsr , Ei2016 Silencer Clip Make Gmi , Ei2016 Silencer Jaali , Ei2016 Silencer Kothi With Packing Make Eicher , Ei2016 Silencer Packing ( Two Hole ) Make Eicher , Ei2016 Sm Red Nozzle Scrapper 04 , Ei2016 Sm Red Nozzle Scrapper Pad 08 , Ei2016 Sm Red Nozzle Scrapper Pad 28 , Ei2016 Sm Rubber Hose 250X1250 Mm , Ei2016 Sm Rubber Sheet 8Mm , Ei2016 Sm Solid Tyre 10X2.5 , Ei2016 Solenoid Pressure Valve , Ei2016 Steering Benjo Bolt , Ei2016 Steering Cross Assembly Make Rds , Ei2016 Steering Oil Filter , Ei2016 Steering Pipe , Ei2016 Sweeping Mach. Blower Bearing Cup , Ei2016 Sweeping Machine Accelerator Cable , Ei2016 Sweeping Machine Blower Bearing , Ei2016 Sweeping Machine Jack Repair , Ei2016 Sweeping Maching 6 / 8 Pipe Jointer , Ei2016 Synchronizing Ring , Ei2016 Tapit Cover Packing , Ei2016 Teflon Valve ( Ss ) , Ei2016 Tie Rod End Make Rane , Ei2016 Top Shaft Bearing ( Big ) , Ei2016 Top Shaft Bearing ( Small ) , Ei2016 Valve , Ei2016 Valve 1 Brass , Ei2016 Wheel Alignment , Ei2016 Wheel Alignment Jumbo 20.16 , Ei2016 Wheel Bearing Inner Front Make Eicher , Ei2016 Wheel Bearing Inner Rear Make Eicher , Ei2016 Wheel Bearing Outer Front Make Eicher , Ei2016 Wheel Bearing Outer Rear Make Eicher , Ei2016 Wheel Bolt & Nut Front N / M Make Gs , Ei2016 Wheel Bolt Front + Double Nut O / M Make Gs , Ei2016 Wheel Bolt Nut Rear N / M Make Gs , Ei2016 Wheel Bolt Rear + Double Nut O / M Make Gs , Ei2016 Wheel Cylinder Assembly Front N / M Make Tvs , Ei2016 Wheel Cylinder Assembly Front O / M Make Saini , Ei2016 Wheel Cylinder Assembly Rear N / M Make Tvs , Ei2016 Wheel Cylinder Assembly Rear O / M Make Saini , Ei2016 Wheel Cylinder Kit Front O / M Make Saini , Ei2016 Wheel Cylinder Kit Rear O / M Make Saini , Ei2016 Wheel Oil Seal Inner Front Make Eicher , Ei2016 Wheel Oil Seal Inner Rear Make Eicher , Ei2016 Wheel Oil Seal Outer Front Make Eicher , Ei2016 Wheel Oil Seal Outer Rear Make Eicher , 4. Ashok Leyland Dost5th C / S Gear&Engaging Gear Assy , 5Th Gear O / P Sft , 5Th Gear Removal Tool , A Of Catalytic Convertercc , Abs Assy-Shock, Fr , Abs Assy-Shock, Rr , Abs-Compl Fr / Rr Shock , Accelarator Cable , Air Brthr ( Metallic ) , Air Filter Element , Al 307 Stg Gear W & N Sub Assy , Aluminium Oil Cooler , Arm Compl-Ws Wiper , Arm, Reverse Gear , Assembly Of Power Steering Pu , Assembly Reverse Idler Gear , Assy Air Filter , Assy–Frt Susp ( Lh + Rh ) , Auxiliary Belt Without Power , Axial Stopper, Rev. Gear Idler Sft , Back Leak Connectorinjector , Back Panel Assembly , Back Plate Assy Lh / Rh , Bag-Tool , Ball Brg Input Sft , Ball Brg O / P Sft Rr , Ball Joint 11.05Mm Groove Height ( Tyrod End ) , Ball;Detent Gear Shift , Ball;Thrust Wash , Band-Hose , Banjounit Pumpfuel Inlet , Banjo Bolt - All Type And Size , Bearing All Size And Type , Belleville Spr , Bellow Kit , Bellow-Air Pre Filter Outlet , Belt All Size And Type , Bracket Alternator And Power Steering , Bracket Alternatorbottom , Bracket Egr Cooler , Bracket Evrv Vacuum Modulator , Bracket Psp Bottom , Bracketac Compressor , Bracketalternator And Power S , Brake Assy-Rr, Lh / Rh , Breather , Brg Assy Tapered Roller , Brg Assy-Fr Wheel, Inr , Brg Assy-Fr Wheel, Otr , Brg Assy-Kingpin , Brg Cover , Brg;Ang Ball, Cluster , Brg;Ball Top Gear , Brg;Ball, Ctnrend , Brg;Ball, Ctnrfrt , Brg;Ball, Main Sftend , Brg;Ndl, Main Sft , Brg;Radial Ball, Main Sft , Brktassly Cbl Holding Selection , Brktassly Cbl Holding Shift , Brkt - Mbr Assy , Brkt - Rr Bmpr Rub , Caliper Assy-Fr Brake, Lh / Rh , Cam Oil Seal Pressing Jig , Cam Shaft , Camshaft Pulley , Cap-Hub , Carr Assy-Spare Wheel , Carrier 1St / 2Nd O / P Sft , Carrier 3Rd / 4Th O / P Sft 3 , Carrier 5Th Gear Counter Sft , Carrier Asm, Caps And , Cartridge-Fuel Filter , Case, Differential ( Mach ) , Circular Clip All Size And Type , Clip-Fr Fdr Protr , Cluster Gear - Msg5t , Clutch Cable , Clutch Plate , Clutch Release Return Spring , Collar-Bush Tens Rod Mtg , Common Rail , Common Rail Imv Pump , Companion Flg Fin , Coolant Temperature Sensor , Cooling Unit , Counter Sft , Diesel Filter Body , Diesel Filter Element , Diesel Tank Fuel Pump Assembly , Disc-Fr Brake , Door Assy-Fr, Lh / Rh , Dost 14 No. Bolt With Nut 1 Long , Dost Air Filter Hose Pipe , Dost Air Mark Coupler , Dost Alternator Hose Pipe , Dost Alternator Oil Pipe , Dost Alternator Oil Seal , Dost Alternator Slipring , Dost Altinator Bolt , Dost Axle Bearing , Dost Axle Hub , Dost Axle Hub Opening Fitting , Dost Axle Oil Seal , Dost Axle Slu , Dost Bearing Seat Making , Dost Begin Bearing , Dost Block Dowel Pin , Dost Block Repairing , Dost Brake Hose Pipe , Dost Brake Master Cylinder , Dost Brake Pad , Dost Brake Pipe 10 No. Nut 18 , Dost Brake Temperature Tee Remove , Dost Brake Woisher , Dost Cage Body Opening Fitting , Dost Cam Makkhi , Dost Cam Oil Seal , Dost Center Bolt 4 ( 3 Soot ) , Dost Chasis Buffer Gutke , Dost Check Nut , Dost Cliper Bolt , Dost Clutch Plate Bs-Iv , Dost Clutch Pressure Opening Fitting , Dost Commonrail Servicing , Dost Coolant Bottle With Cap , Dost Coolent Bottle , Dost Coolent Bottle Cap , Dost Coolent Bottle With Cap , Dost Coolent Hosepipe , Dost Cr Bearing , Dost Cr Bush , Dost Crank Repairing , Dost Crank Sensor , Dost Cross Holder , Dost Crown Pinion Repairing , Dost Dhadi Mouth Making , Dost Dhadi Repairing , Dost Dhadi Thhiya Nut Bolt , Dost Diesel Filter ( Steel ) 2 Mouth , Dost Diesel Filter Assy. ( Iron ) , Dost Diesel Filter Coupler , Dost Diesel Filter Sensor , Dost Diesel Fuel Tank Unit Assy. Bs-Iv , Dost Diesel Pipe , Dost Diesel Pipe 3 Mouth , Dost Diesel Pipe Bs-Iv , Dost Diesel Return Pipe , Dost Diesel Tank Cap , Dost Diesel Tank Patti , Dost Diffrential Hozing Assy , Dost Door Glass Catcher , Dost Door Glass Handle , Dost Ecu Flashing , Dost Egr Valve Coupler , Dost Engine Foundation , Dost Engine Foundation Bolt , Dost Engine Foundation Nut Bolt , Dost Engine Foundation Rubber , Dost Engine Head , Dost Engine Mounting , Dost Engine Oil Seal , Dost Fark Lever , Dost Fevikwik 20 Gm , Dost Field Bolt , Dost Field Bolt Soldering , Dost Fip , Dost Fip Pump Rotter , Dost Fip Pump Servicing , Dost Flashing , Dost Flywheel Bearing 6202 , Dost Flywheel Cut Polish , Dost Flywheel Facing , Dost Front Bumper , Dost Front Hub Lhs , Dost Front Kamani Bush , Dost Front Kamani Front Mouth Bush , Dost Front Kamani Rear Mouth Bush , Dost Front Main Glass Fitting , Dost Front Wheel Thrust Woisher , Dost Front Wheel Top Ghumana , Dost Fuel Pump Servicing , Dost Fuel Pump Solenoid Switch , Dost Fuel Pump Solenoid Switch Coupler , Dost Full Engine Service , Dost Full Yoke , Dost Gear Box Bolt , Dost Gear Box Repairing , Dost Gear Box Servicing , Dost Gear Cable Lock Patti , Dost Gear Chilam , Dost Gear Dog Kit , Dost Gear Foundation , Dost Gear Hosing Repairing , Dost Gear Mounting , Dost Gear Tapa , Dost Gear Tapa Kit , Dost Gear Tapa Repairing , Dost Glass Pest , Dost Half Yoke , Dost Half Yoke Opening Fitting , Dost Head Cam Pully , Dost Head Repairing , Dost Head Servicing , Dost Head Spring , Dost Hose Pipe , Dost Hose Pipe Kit , Dost Hose Pipe Kit Clip , Dost Hub Bolt No. 27 , Dost Hub Oil Seal , Dost Hydraulic Filter , Dost Hydraulic Guage Pipe , Dost Hydraulic Jack , Dost Hydraulic Jack Nut , Dost Hydraulic Jack Pin , Dost Hydraulic Jack Seal Kit , Dost Hydraulic Jack Tube Polish , Dost Hydraulic Lift Motor Bush , Dost Hydraulic Motor Repairing , Dost Hydraulic Pipe , Dost Idoler , Dost Injector Nozzle Bs-Iv , Dost Injector Nozzle Coupler , Dost Injector Nozzle Service , Dost Injector Pump Servicing , Dost Inner Handle Taan , Dost Jack Tube Polish , Dost Jointer 08 No. , Dost Jointer 10 No. , Dost Kamani Pin , Dost Kamani Tikli , Dost Kamani U Clamp I Bolt , Dost Kingpin Unit , Dost Lath Work , Dost Lift Motor Field Bolt Soldering , Dost Lift Switch Box , Dost Liner Slu , Dost Makkhi Woisher , Dost Master Cylinder Kit Major , Dost Master Cylinder Repairing , Dost New Accelerator Paddle , Dost New Altinator , Dost Nozzle Hosepipe , Dost Nozzle Overflow Pipe ( Lockwali ) , Dost Nozzle Return Overflow Pipe , Dost Nut 12 No. , Dost Oil Chamber , Dost Oil Chamber Packing , Dost Oil Cooler Body Bs-Iv , Dost Oil Guage Inner , Dost Oil Guage Outer , Dost Oil Hose Pipe , Dost Oil Jaali , Dost Oil Pressure Switch , Dost Oil Pump Jaali , Dost Oil Seal Set , Dost Oil Separator , Dost Outer Handle Taan , Dost Packing Kit , Dost Power Steering Pipe , Dost Power Steering Rack , Dost Pressure Plate Bs-Iv , Dost Propeller Shaft Nut Bolt 14 No. , Dost Propeller Shaft Repairing ( Pipe Change ) , Dost Pump Solenoid Switch Coupler , Dost Radiator Cap , Dost Radiator Fan Repairing , Dost Radiator Hose Pipe , Dost Release Bearing Bs-Iv , Dost Release Bearing Lock , Dost Retueb Tee ( Fip Tee ) , Dost Rfa Rear Axle Assy ( 4.1 ) , Dost Shaft Cross , Dost Shaft Teeth Welding , Dost Side Plate ( Oil Plate ) Packing , Dost Side Plate ( Oil Plate ) Bolt 1 , Dost Silencer Pipe With Jali , Dost Silencer Rubber ( Gutke ) , Dost Silicon Tube Black , Dost Solenoid Screw , Dost Spendal Nut , Dost Spendal Thread Making , Dost Spider Kit Opening Fitting , Dost Steering Coupling , Dost Steering Coupling Assy. , Dost Steering Cross Assy. , Dost Steering Cross Rod , Dost Steering Pipe Repairing , Dost Steering Rack , Dost Steering Rack Assy , Dost Steering Rack Boot , Dost Steering Rack Boot Clip Set , Dost Steering Rack Kit , Dost Steering Rack Repairing , Dost Steering Transmission Box Assy. , Dost Steering Yoke Rod , Dost Tank Repairing , Dost Tapit Bottle , Dost Tapit Coin , Dost Tapit Cover Packing , Dost Tapit Katori , Dost Temperature Tee , Dost Tikli Round , Dost Timing Gear , Dost Tmc Valve , Dost Top Plate , Dost Tube 165R14 , Dost Tube 185 D / 14 , Dost Tube 185R14 , Dost Tube Polish , Dost Turbo Main Oil Pipe , Dost Turbo Repairing , Dost Turbo Servicing , Dost Uj Cross , Dost Valve Cap , Dost Valve Catcher , Dost Wheel Bolt With Nut Rear , Dost Wheel Hub Rear , Dost Wiper Blade , Dost Woisher 18 No. , Dowel - Dia 10 X 37 Long , Dowelspring Dia 13.5 L10 , Dowelspring Dia15 L16 , Dowel Dia 1022 Long , Dowel Dia 8 18Long , Dowel Dia4 , Dowel Hollow , Dowel Target Wheel6mm , Dowelinjector Dia 8X10 Long , Dowell Hollow.Rr Hsg. / Int.Hsg , Dowell Pin Cl.Hsg / G.B Hsg Assy , Drift - Ctr Shaft Frt & Rr End Brg , Drift Air Breather - Gb - Dost , Drift -Diff Cage Side Bearing , Drift For Cam Brg In The Housing , Drift For Exhaust Valve Seat , Drift For Front Cover Oil Seal , Drift For Front Hub Grease Seal , Drift For Inlet Valve Seat , Drift For Rear Cover Oil Seal , Drift For Upper Link Bushing , Drift For Valve Guide , Drift Main Sft Frt End Inter Brg , Drift Pinion Inner Brg Race ( Frt ) , Drift Pinion Oil Seal , Drift Pinion Outer Bearing Race ( Rr ) , Drift-Inner Bearing Race ( Hub ) , Drift-Main Shaft Rr End Brg , Drift-Outboard Oil Seal , Drift-Outer Bearing Race ( Hub ) , Drift-Pinion Inner Bearing , Drive Belt Alternator And Pow , Drive Beltac Compressor , Drive Head Flange Puller , Drum-Rr Brake , Ecu ( Delphi ) , Egr Cooler Assembly , Egr Pipe1van , Egr Pipe4 , Egr Plate , Egr Valve Assy , Emblem-Fr , End Plate For P15 Starter Motor , Engaging Gear, 1St / 2Nd , Engaging Gear, 3Rd / 4Th , O / P Sft , Engine Assembly P15 Bs4 Spd Bom , Engine Mounting Bracketlh / Rh , Escut-Door Lock Knob , Escut-Inside Handle , Exhaust Manifold , Exhaust Manifoldbs3 , Fan Motor Assly - Non Ac , Feed Pipe Assy - Long , Feed Pipe Assy - Short , Fill Plug , Fin Assy-Fr Door, Lh / Rh , Fin-Fr Door Corner, Lh / Rh , Fip Cam Roller For P15 , First Gear O / P Sft , Fitment Tool , Flgdiff Brgcone ( Timken / Koyo ) , Flgext Diff Brg Cup ( Timken / Koyo ) , Fr Leaf No : 1 , Fr Leaf No : 1 Rfs , Fr Leaf No : 2 , Fr Leaf No : 2 Rfs , Fr Panel Assy-Corner, Lh / Rh , Fr Panel Assy-Ctr , Fr Spr Liner - Rfs , Fr Susp Rr-Brkt Assy , Fr Tip Insert Rfs , Frame Assy – Lwb 13+D Power Strng , Frame Assy # Lwb Ambu Power Strng , Fuel Control Unit , Fuel Feed - All Types , Fuel Filter , Fuel Filter Element For P15 - Bosch , Fuel Level Sen , Fuel Level Sen - Bosch , Fuel Pumpimv , Fuel Tank Assembly , Gaskettc Oil Drain Flange , Gasket Coolant Inlet Body , Gasket Cylinder Head , Gasket Exhaust Manifold , Gasket-Oil Pump , Gearpinion Mate & Side Net Form , Gearsidenet Form , Gear & Pinion Assy , Gear ;Rev. Idler , Gear Asm;2Nd Main , Gear Asm;3Rd Main Sft , Gear Asm;5Th Main Sft , Gear Asm;Low, With Synchro , Gear Assy-Ps , Gear Assy-Strg , Gear Assy-Transfer, Strg , Gear Box Assy ( Rsb ) , Gear Box Hsg , Gear Cable , Gear Set ( 4.44 Ratio ) , Gear Set, Ring And Pinion , Gear Train Holding Fixture , Gear, Diff Pinion ( Mach ) , Gear, Diff Side ( Mach ) , Gear; Speedo Drv , Gear;5Th, Ctnr , Gear;Ctnr , Rev , Gear;Rev, Main Sft , Glass-Back Wdw , Glass-Fr Door, Lh / Rh , Glass-Wind Shield , Grip-Asst , Grmt-Inst Pin , Handle Assy-Fr Door Inside , Handle Assy-Fr Door Outside, Lh / Rh , Handle-Jack , Handle-Pull , Hose - Pipe All Type , Hp Pump , Hp-Pipe 1&2 Rail To Injector , Hp-Pipe 3 Rail To Injector , Hp-Pipe Pump To Rail Bosch , Injector , Injector Clamp , Injector Dummy - Dost Bosch System , Inlet Manifold , Lever Assy-Brake Pedal , Lever Assy-Clutch Pedal , Lid - Resvr Brake Fluid , Main Bearing , O Ring Fip , O Ring Speedo Pinion Hsg , Obj Assy , Oil Collector , Oil Cooler With Oring , Oil Filler Cap , Oil Filterspin On Type , Oil Seal , P15 Enginelong Block , Pedal Stopper , Pilot Bearing , Pilot Bearing Puller , Pinall Types And Objrvt. , Pinion Oil Seal , Pin-Link Bush , Pin-Rr Spr, Rr , Pin-Snap 8 , Pipeegr Coolant Inlet , Pipe Assy-Compl , Pipe Compl Cooler, High , Pipe Flangedcoolant Inlet To , Pipe Oil Reciever , Pipe1-Common Rail To Injector , Pipe2-Common Rail To Injector , Pipe3 Egr , Pipe3-Common Rail To Injector , Pipe-Egr Cooler Return Hose To T Connec , Pipe-Pump To Common Rail - Vave , Pipe-Pump To Common Rail ( Imv Pump ) , Pipe-Rad, Lwr , Pipe-Second, Between Brake Boo , Pipetc Oil Drain , Pipetc Oil Inlet , Piston , Piston Ring Set , Plug-All Type And Size , Power Socket Assy , Power Steering Pump , Pre Fuel Filter - Dost , Pressure Cap Big , Pressure Cap Small , Pressure Plate , Protr Tube , Protr-Eng Cover , Protr-Harn , Psp-Bracket Top , Puller -Diff Cage Side Brg-Lh&Rh , Puller For Axle Shaft Bearing , Puller-Front Pinion Bearing , Pulleypower Steering Pump , Q Box Assy ; Cbl Shift , Rad Assy , Rail Assy-Eng Cover , Rcb Mntg Brkt , Rear Adaptor Housing Avtechge , Rear Adaptor Housing Zomaxgea , Rear Body Fender Set , Rear Combination Lamp- Rh , Rear Housing Oil Seal Installer Assly , Rear Oil Seal Pressing , Reflector Assy-Fr Side , Relay Drop Arm , Relay Housing , Relay Shaft Machined , Relay-Ems Ecu Feed , Relay-Rad Fan , Relay-Rad Fan - 50Amps , Release Bearing , Remover - Brush Holder Assembly , Rep Kit For Synchro - Rsb , Rep Kit T / M O / H , Resistor - Blower , Resistor - Radshroud , Resvr-Brake Fluid , Ret Assy Oil Seal , Retainer Wheel Bearing Inner - New , Retainer Whl Brg Inr , Retainer, Diff Pinion Shaft , Reverse Idler Gear Sft , Reverse Indicator Sw , Ring Gear For P15 Flyweel , Ring Gear Scr , Ring Gear Stopper , Ring Snap All Types And Size , Ring, Retaining , Rivet- Blind, Rd Hd, Pull 3.2X4 , Rocker Sftmachined - Al 307T , Rod Assy-Bat Cover , Rod Assy-Rad Mtg, Lh / Rh , Rod Assy-Relay , Rod Assy-Tie, Lh / Rh , Rod-Bat Fix , Rod-Compr, Fr Susp , Rod-Fr Door Handle, Lh / Rh , Roller Brg Pilot , Roller Brg, C / S Fr , Roller Brg, C / S Rr , Roller Tappet , Rotory Link Assy - Wiper , Rrcvr Assy , Rr Leaf No : 1 , Rr Leaf No : 1 Rfs , Rr Leaf No : 2 , Rr Leaf No : 2 Rfs , Rr Spr Liner - Rfs , Rub Pad , Rubber-Pedal Stopper , S / A Of Flywheel And Ring Gear , S / A Of Piston , S / A Of Water Pump , S / A Pipe Vacuum Pump Oil , S / A Piston Cooling Nozzle ( Assy ) , Sacrank Shaft With Crank Ge , Sa Arm , Sa Bracket - Idler , Sa Connecting Rod , Sa Dipstick Guide With Bracke , Sa Egr Valve Wo Feedback , Sa Of Camshaftbosch Fie , Sa Of Camshaft Dtvs , Sa Of Catalytic Convertercc , Sa Of Cover Cylinder Head , Sa Of Oil Pump , Sa Of Pipevsv To Egr Valve , Sa Of Pipe Vaccum Pump Oil In From Block , Sa Of Strainer , Sa Of Sump With Drain Plug , Sa Of Tensioner For Alternato , Sa Of Turbocharger , Sa Rev Sleeve Yoke , Sa Rev Sleeve Yoke ( Rsb ) , Sales Kit , Second Gear Assembly O / P Sft , Self Armature Make Comstar , Self Bendex Make Comstar , Self Body Make Comstar , Self Brush Plate Make Comstar , Self Egt Complete Make Comstar , Self Hosing Make Comstar , Self Katora Make Comstar , Self Lock Nut Flanged M8x125 , Self Solonoid Switch Make Comstar , Sens Assy Speed , Sensor Hfm , Serv Kit Inboard Seal , Serv Kit, Axle Shaft Each Side , Serv Kit, Bearing ( Axle Shaft ) , Serv Kit, Diff Case , Serv Kit, Ring And Pinion , Serv Kit, Seal ( Outboard ) , Serv Kit, Seal ( Pinion Seal ) , Serv Kit, Thrust Washer , Setting Block Pinion Height , Setting Dummy - Pinion Ht , Setting Tool Pinion Height , Sftdiff Std , Sftflg Axle Fin , Sft ;Rev Idle , Sft Assy- Prop , Shackle Assy-Rr Spr, Rr , Shackle-Plate, Rr Spr Rr , Shaft, Axle ( Mach ) , Shaft, Diff Pinion , Shift Arm Rev , Shift Arm;Low-2Nd , Shift Arm;Rev-5Th , Shift Arm;Top-3Rd , Shift Blk Assy , Shift Blk-Clutch , Shift Fork , Shift Fork;With Spr , Shift Rod Rev , Shift Rod;Low-2Nd , Shift Rod;Top-3Rd , Shifter Dog 1St / 2Nd , Shifter Dog, Reverse & 5Th Gear , Shifter Fork 1St / 2Nd , Shifter Fork 3Rd / 4Th , Shifter Fork, 5Th , Shifter Sft 1St / 2Nd , Shifter Sft 3Rd / 4Th , Shifter Sft Reverse Gear , Shifter Sft, 5Th , Shifter Sleeve 1St / 2Nd , Shifter Sleeve 3Rd / 4Th O / P Sft , Shifter Sleeve, 5Th Counter Gear , Shiftershoe, Reverse Bracket , Sho Adj-Cover , Shroud - No Loss Tank , Shroud Assy , Shroud Assy-W / Motor Fan , Side Glass Lh / Rh , Skirt Panel For Fuel Tank Guard , Sleevehub Asm;Top-3Rd , Sleeve & Hub Asm;Rev-5Th , Sleeve & Hub Assy Low 2Nd , Sliding Glass Assy-Back Wdw , Socassy- Lh ( Tra ) / Rh , Socassy- Rh ( Dla ) , Socket For Pcn Assembly , Socket Screw M6x1x30 , Spacer - Clamp , Spacer, 5Th C / S , Spacer, Pinion Bearing , Spacer-Tube , Spcr- Pinion Brg , Spcrrocker Sft ( W&R ) , Spcr ;Brg Drv Gear , Spcr Pinion Brg , Spd Long Block For P15 58Ps W , Spdl Assy-Knu, Lh / Rh , Speedo Gear O / P Sft , Speedo Pinion , Speedo Pinion Hsg , Spindl-Upr Link , Splash Guard-Fr Wh , Sprpin Assy; Shift Arm , Sprpin;Inr , Sprpin;Otr , Spr ;Blk To Fork , Spr ;Detent Ball , Spr ;Fork To Supt , Spr Assy-Fr , Spr Assy-Rr , Spr Pin-Check L B2 , Spr Ret, Withdrawal Lever , Spr Wa;Rrcvr , Spreader On Carrier , Spring Dowel Removal Chisel , Starter Motor , Stfnr Assy-Fr Bmpr , Stfnr-Door Lock, Rh , Stiffenerlh / Rh , Strap-Asst Seat , Striker Assy-Door , Striker-Glove Box Lid , Sunvisor Assy-Lh / Rh , Supt ;Clutch Fork Clutch , Supt Assy-Bat, Fr , Supt Assy-Engmtg, Lh / Rh , Supt-Rub, Fr Spr Lh / Rh , Swassy ;Rev Lamp , Sw Assy-Clutch , Sw Assy-Door Lock Cyl, Rh , Sw Assy-H / L Level , Sw Assy-Ign , Sw Comp-Comb , Swing Lever, Reverse Gear , Sync Cone 1St / 2Nd Gear , Sync Cone 3Rd / 4Th / 5Th C Gear O / P Sft , Sync Ring, 5Th Counter Gear , Tank Assy-Fuel , Tank Assy-Ps , Tank Assy-Rad Resvr , Tank Assy-Wash , Tank Compl-Fuel , Tank Compl-Rad Resvr , Tank Compl-Rad Resvr With No Loss Tank , Tensioner Gauge ( U508 Sonic Tester ) , Thermistor - Blower , Thermostat , Thermostat 88 Deg , Thermostat Exp Val - Blower , Third Gear Assembly O / P Sft , Threaded Insert , Thrust All Type And Size , Thrust Wshr H 8.3 , Timing Belt , T-Map Sensor , Top Bush-Rub Shock Abs, Rfs , Top Gear Sftwith Synchro , Touch Idler Pulleytiming Belt , Trans Assy , Transmission Case & Plate Im , Triangle - Warning , Tube Asm, Breather , Tube-Vac, Brake Booster , Turbo Outlet Pipe , Turbo Pipe Bracket , Upr  Col  Assy , Vaccuum Pump - P15 Alternator , Vacuum Modulator , Vacuum Solenoid Valve Vsv , Valveexhaust , Valve Assy-Load Sensing , Valve Inlet , Valve Oil Seal Drift , Valve Split Cone , Valve Spring Compressor , Valve Spring Inner , Valve Spring Outer , Valve Stem Seal ( Nok ) , Valve-Air , Vent Assy-Side, Lh / Rh , Vent Conzole , Venturi , Vibration Damper Pulley , Water In Fuel Sensor , Welt-Body Side, Fr , Wheel Assy-Disc , Wheel Assy-Strg , Wheel Bearing Carrier , Wheel Cap - Dost , Wheel End Shim All Type And Size , Whl Cyl Assy , Wiping System Assy , Wire-Bonding, Res , Wrench-Wheel Nut , Wstrip - Back Wdw , Wstrip Assy-Fr Door, Lh , Wstrip Assy-Fr Door, Rh , Wstrip-Back Wdw , Wstrip-Body Side, Lh / Rh , Wstrip-Ws , Yoke Cmpt Sliding , Yoke Cmpt  Cross Joint Flg , 5. Mahindra Maxximo2.5 Clip , Accl Pedal Assy , Adaptor Oil Filling , Air Filter Element , Air Filter Hosepipe , Allen Key Bolt ( Hub ) , Arm Bolt , Assembly Leak Off Pipe , Assembly Water Pump , Assy Connecting Rod - 2 Cyl. Eagle , Assy Fan And Shroud , Assy Fuel Tank , Assy Hose Radiator Outlet , Assy Hose Vac Reservior To Tmc , Assy Latch Tailgate , Assy Lower Control Arm Rh , Assy Oil Sump- 2 Cyl. Eagle , Assy Piston Cooling Jet , Assy Synchro Pack 5Th Mpv , Assy Vacuum Pump-2 Cyl. Eagle , Axel , Axel Bearing , Axel Bearing Opening Fitting , Axel Lock , Axel Slu , Axle Bearing , Axle Katora , Axle Repairing , Ball Bearing 6205.2Rsr.C3 , Ball Brg 5Th Support 61903.2Rsr.C3 Mpv , Ball Joint , Ball Joint Assembly , Ball Joint Lh / Rh , Beading Windsheild , Bearing Clutch Release , Bleeder Screw , Block Repairing , Bolt Banjo , Bolt Mass Balancer Cap , Bracket Oil Seperator Na Bs-Iv , Brake Disc , Brake Liner Lock , Brake Liner Spring Kit , Brake Pipe ( 3 Ft Long ) , Brake Pipe ( No.10 & 11 ) 2Ft. , Breather Assy , Brush Holder Complete , Bush Shock Absorber , Bush Silent Block , Cable Parking Brake Rear Lh / Rh , Cage Body Grinding , Cage Body Repairing , Caliper Assy Front Lh / Rh , Cam Coupler , Cam Sensor , Camshaft Intake , Center Bolt 3 Soot 4 , Center Bolt 6 ( 17 No. Nut ) , Center Pin , Circlip Int - Lug 47X1.75Xph , Clutch Cable Assy , Clutch Fark Bush , Clutch Plate , Clutch Release Bearing , Combination Lamp Rear Lh / Rh , Combination Switch , Common Rail , Common Rail Coupler , Commonrail Servicing , Completeclutchassy , Cone , Connecting Bush , Control Housing Cable Shift Ltv , Coolent Bottom Hose , Corss Holder , Counter Shaft 5 Speed , Cr Bush , Crank Repairing , Crank Sensor , Crankshaft Machined - 2 Cyl. Eagle , Crdi Pipe , Cross Mbr Degas Tank , Crown Bearing , Crown Lock Patti , Crown Pinion , Crown Pinion Repairing , Crown Thali Bolt , Degassing Tank , Dgbb 35*72 2Rsr 6207 Ltv Whl End Brg , Dgbb Bearing Carrier Ltv , Dgbb Bearing Carrier Mpv , Diesel Filter Body , Diesel Filter Element , Diesel Main Pipe , Diesel Motor Assy. Machine , Diesel Return Banjo Type , Diesel Return Pipe , Diesel Tank Cap , Diesel Tank Fuel Pump Assembly ( Diesel Motor Assy. ) , Diff Bevel Forged Pinion Mate 9T Ltv , Door Glass ( Rhs ) , Door Glass Catcher , Door Glass Handle , Door Glass Machine ( Lhs ) , Door Lock Screw , Drag Link Assy Steering , Ecu , Ecu Flushing , Egr Valve , Engine Cross Member Bush , Engine Foundation , Engine Foundation Thhiya , Engine Isolator , Engine Mounting , Engine Mounting Thhiya , Engine Servicing , Engine Wiring Harness , Etainer Housing Front Brg Ltv , F.I.P. Pump , Fabric Trim Pad Frt Door Lh / Rh , Fan Belt , Fan Motor , Fark Lever , Fip Pump , Fip Servicing , Fixed Guide - 2 Cyl. Eagle , Flip Pump , Flywheel Bearing , Flywheel Bearing 6000 , Front Caliper Assy Lh / Rh , Front Main Glass Fitting , Fuel Feed Pump W / O Fls , Fuel Filter Cartridge , Fuel Level Sensor Assy. , Fullyoke Complete , Gasket Cylinder Head- 2 Cyl. Eagle , Gasket Exhaust Manifold - Catcon , Gaskit , Gear Chilam , Gear Danda , Gear Dog Kit , Gear Foundation , Gear Lever Assy. Complete , Gear Rod Assy , Gear Shifter Cable Sys Assy , Gear Shifter Slu ( 2Nd-3Rd ) , Gear Tapa , Glass Tailgate , Grill-Front Bumper , Guide Dip Stick - 2 Cyl. Eagle , Half Yog , Head Repairing , Head Seat , Head Servicing , Headlight ( Lhs ) , Heater Tubes Assy Heater Side , Hla , Horn Pad Steering Wheel , Hose Air Filter Outlet , Hose Air Vent , Hose Assy Blow-By , Hose Assy Front Brake , Hose Egr Cooler Water Outlet , Hose Engine Out To Thermostat In , Hose Inlet Egr Side , Hose Moulded Clean Side , Hose Oil Sep. Drain Na Bs-Iv , Hose Oil Seperator , Hose Oil Seperator Drain , Hose Outlet Engine Side , Hose Radiator Outlet , Hose Thermostat To Radiator Inlet , Hose Vac Pump To Reservior , Hosepipe , Hosing Bearing , Housing Bearing , Hub , Hub Bearing , Hub Bearing Fitting , Hydraulic Jack Tee ( Adoptor ) , Hydraulic Motor Assy , Hydraulic Pipe , Hydraulic Tank Bolt , Hydraulic Tank Me Hole Karana , Hydraulic Tank Motor Repairing , Idler Box Assy , Injector Coupler , Injector Nozzle Servicing , Instrument Cluster Maxximo Obdii , Intermediate Shaft Assembly , Joint Patti , Kamanipatte 38 , Kamani A No. Patta , Kamani B No. Patta , Kamani Bush , Kamani Bush ( Shockup ) Dhol Type , Kamani Tikli Thick , Kit Con Rod Bearing ( Begin Bearing ) , Kit Front Caliper -Major , Kit Latch Assy Frt Door Lh / Rh , Kit Mass Balancer , Kit Pad Assy Disc Brake , Kit Pigtail And Fuel Filter Assy , Kit Pigtail Coolant Temp Sensor , Kit Pigtail Pressure Control Valv , Kit Pigtail Vehicle Speed Sensor , Kit Pigtail Wtr In Fuel Sensor , Kit Piston Pin N Rings Os 0.2 , Kit Ring Set Piston , Kit Ring Set Piston O / S 0.3 , Kit Service Degass Tank Bsiii , Kit Sliding Pin , Kitlatchassyfrtdoorrh , Kitpigtailvehiclespeedsensor , Latch Assy Rr Sliding Door Lh / Rh , Lift Coil , Lift Motor Brush , Lift Motor Field Bolt , Lift Motor Field Bolt Soldering , Lift Motor Field Coil Repairing , Lift Motor Repairing , Lined Kit ( Kbx 495 ) , Liner Slu , Lip Oil Seal , Lower Control Arm Comp Rh , Lsp Valve , M Nm Pad Kit Number , Main Bearing , Main Oil Seal , Major Kit - Tmc , Mass Balancer Bearing Front-2 Cyl. Eagle , Mass Balancer Bearing Rear -2 Cyl. Eagle , Mass Balancer Shaft - Na , Mesh-Grille Radiator Rh , Mirror-Rear View Inside , Mirror-Rear View Outer Lh / Rh , Needle Roller Brg 30X35x27 , Nef-Oil Seperator , Nipple Drain Hose , Non Return Pipe , Non Return Valve , Nozzle Assy, Piston Cooling , Nozzle Overflow Pipe , Oil Filter , Oil Guage , Oil Guage Pipe , Oil Jet , Oil Pressure Switch Mhawk2 , Oil Seal ( Maximo Axel Oil Seal ) , Oil Seal-Transm.Frt.Brg.Ret. , Oil Separator Assy , O-Ring Vacuum Pump , Overflow Pipe , Packing Kit , Pad Kit , Pad Spring , Park Brake Lever Assy , Parking Brake Cable Frt , Parking Brake Cable Rr , Parking Brake Frnt Cable Mpv , Parking Brake Lever Assy Mpv , Pinion Bearing , Pinion Bearing Small , Pinion Shim , Pinion Slu , Pinionoilsealltv , Pipe Cylinder Head Water Outlet , Pipe Degassing , Pipe High Pressure Pump To Rail , Pipe Water Pump Inlet , Pipe Water Pump Inlet-Tc , Popular Shaft , Popular Shaft Nut Bolt , Pressure Plate , Push Rod , Push Rod Arm ( Lhs+Rhs ) , Radiator Assembly , Rear Axle Semifloat Shaft Ltv , Rear Brake Drum Ltv , Rear Combination Lamp Lh / Rh , Rear Kamani Tikli , Rear Shock Absorber , Rev Idler Gear Assy Ltv , Ring Gear Flywheel - Two Cyl , Ring High Speed Synchronizer , Select Cable Assy , Shift Cable Assy Ltv , Shock Absorber Assy Rear , Shockup Front ( Rhs ) , Shoe Return Spring Lower , Shoe Return Spring Upper , Side Bearing , Silencer Jaali , Sliding Roller Assy Lwr Rr Dr Lh / Rh , Sliding Roller Assy Mid Rr Dr Lh / Rh , Sliding Roller Assy Upr Rr Dr Lh , Snap Ring Ltv , Solenoid Screw Bosch , Spindle , Square U Clamp 7 , Star Chowkdi Pin , Star Washer , Steering Arm Lhs , Steering Box Nut Bolt With Woisher 5 16 No. , Steering Box Nutbolt With Woisher 13 No. , Steering Coloumn Complete , Steering Cross Assy. , Steering Gear Assy , Steering Gear Assy With Out Drag , Steering Patti , Steering Pump , Steering Rack , Steering Rod , Strut Assy Complete Lh / Rh , Strut Body Assy , Strut Mtg.Brkt. , Strutassemblycomplete , Suspension Arm , Suspension Arm Bolt 17 No. 4 , Synchro Assy 3 N4 , Tandem Master Assly , Tapit Cover Me Tuta Bolt Nikalna , Tensioner Arm - 2 Cyl. Eagle , Thermostat Assy Na Engine , Thrust Woisher , Tie Rod End , Timing Chain , Timing Gear ( Big ) , Timing Gear ( Small ) , Timing Oil Seal , Timing Tensioner , Top Mount Assy Moulded Lh / Rh , Top Mount Assy Moulded Rh , Tube Whl Cyl Rear Rh , Uj Cross , Uj Kit_1130 , Valve Intake- Lxcrdi , Valve Oil Seal , Valve Sheet , Water Benjo Pipe , Water Pump Assembly , Weel Cylinder Assy Lh / Rh , Wheel Bearing Fitting , Wheel Bolt , Wheel Hub Assy , Wheel Hub Bearing Lock , Wheel Hub Oil Seal , Wheel Nut , Wheel Rim 4J X R12-55Mm Offset , Windshield Glass , Wiper Blade And Arm Assy Co-Dr / S , Wiper Blade Assy , Wire Harness Alternator And Start , Wiring Harness Chassis , Wiring Harness Engine , Wiring Harness Front , 6. Mahindra Jeepaccelator Panja Complite Make Napco , Accelator Wire Cable Make Napco , Accelator Wire Ka Bolt Make Napco , Accelator Wire Make Napco , Air Filtermake Lumax , Axel Bearing 25821 Rear Make Nbc , Axel Chabi Make Super , Axle Makkhi Woisher Front Make Super , Axle Nut Front Make Lokesh , Axle Rearmake Axlo , Back Door Glassmake Lacto , Back Door Glass Rubber Chennal Makehylex , Back Door Lock With Handle Makeanshu , Bail Cranckroller Bearing Make Nrb , Bail Cranck Assy Make Main , Body Mounting ( Foundation ) Make Vicas , Bonut Clip With Nut Bolt Make Napco , Bonut Ghutke Make Napco , Bonut Hook Clip ( 4 Nos ) Make Napco , Brake Bottle Thread Wali Make Tvs , Brake Liner & Rivit Front Make Tvs , Brake Liner & Rivit Rear Make Tvs , Brake Liner Spring Make Tvs , Brake Oil Dabbi Se Master Cylinder Tak Ka Pipe ( 6 Ft. ) ( Rubber Ka ) Make Eyelex , Brake Paddle Bracket Bush Make Napco , Brake Paddle Bracket Make Napco , Brake Pipe Left Front Make Tvs , Brake Pipe Rear Left Make Tvs , Brake Pipe Rear Right Make L.M.S , Brake Pipe Right Front Make Tvs , Brake Thali Nut Bolt Make Tvs , Break Liner Spring Make Tvs , Chasis Aade Bolt Make Tvs , Chasis Cross Member Foundation Make Vicas , Check Nut Make Tvs , Chock Wire Make Pricol , Clutch Aaye Bolt Make Tvs , Clutch Fark Make Napco , Clutch Paddle & Brake Paddle Ghutke Make N.P.R , Clutch Paddle Namda Kit Make Nepco , Clutch Paddle Pin Make Balcon , Clutch Patti Make Kpi , Clutch Pipe Make Napco , Clutch Plate Assy Make Mahindra , Clutch Plate Facing Make Ca , Clutch Release Bearing Make Rane , Clutch Release Bearing Spring Nepco , Clutch Release Hub Make Lokesh , Clutch Rod Make Lokesh , Clutch Stud Bolt Make Nepco , Clutch Taan Lever Make Lokesh , Diesel Filter Make Purolat , Diesel Overflow Pipe ( Nozzle ) Make Mico , Diesel Tank Dhakkan + Lock Make Ashu , Diesel Tank Hose Pipe Make Npr , Diesel Tank Patti Make Npr , Diesel Tank Rubber Make Npr , Differentiol Crown Adjusting Bolt Assy. Make Tvs , Differentiol Crown Cage Bearing Skf , Differentiol Crown Pinion Bearing Make Skf , Differentiol Crown Spider Kit Make Gajra , Differentiol Crown Wheel & Pinion Make Gajra , Differentiol Pinion Flanch Mahindra , Differentiol Pinion Oil Seal Make Pioneer , Differentiol Pinion Pilot Bearing Makeskf , Disel Nali Make Sak , Disel Tank Complite Make Nepco , Disel Tank Hose Pipe Make N.P.R , Engine Begin Bearing Make Kirloskar , Engine Block Makr Mahindra , Engine Cam Shaft Make Mahindra , Engine Connecting Rod Bush Make Kirloskar , Engine Connecting Rod Makebharat , Engine Crank Grinding, Polish , Engine Crank Make Mahindra , Engine Cylinder Liner Make Power , Engine Foundation Front Make Vicas , Engine Foundation Rear Make Vicas , Engine Half Gaskit Make Victor , Engine Head Guide, Headseat Opening Fitting And Griding Facing , Engine Head Make Mahindra , Engine Head Seat Make Grandles , Engine Kem Bush Make Kirloskar , Engine Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Engine Liner Rubber Ring Make Tvs , Engine Liner Sleeve Make Tiger , Engine Main Bearing Make Kirloskar , Engine Oil Body Voisher Make Nepco , Engine Oil Chamber Packing Make Nepco , Engine Oil Filter Paper Wala Make Elofik , Engine Oil Filter Pijo Make Elofik , Engine Oil Filter Ring Make Npr , Engine Oil Filter Steel Wala Elofik , Engine Oil Gage Withouter Make Nepco , Engine Oil Meter Pipe Make Tosy , Engine Oil Pump Assy. Make Mahindra , Engine Oil Pump Gear Make Mahindra , Engine Oil Seal Kit Make Nepco , Engine Packing Kit Make Victor , Engine Piston Ring Make Ipl , Engine Piston With Pin & Surclip Make Ipl , Engine Tapit Cover Packing Make Victor , Engine Tapit Cover Zonga Ka Pipe Make Nepco , Engine Tapit Cover Zonga Make Nepco , Engine Water Pumphub Make Nepco , Engine Water Pump Assy. & Packing Make Mahindra , Fan Belt Make Fanner , Front Main Glassmake Atul , Front Main Glass Rubber Channel Make Lecto , Fry Wheel Bush Make Msp , Fry Wheel Ring Make Bharat , Fuel Pump Meter Make Bharat , Gear 1St Dog Kit Make Mahindra , Gear 3Rd 5 Gear Wala Make Gajra , Gear Box Changer Shaft Make Balcon , Gear Box Chilam Oil Seal Make Chairman , Gear Box Fork Make Main , Gear Box Milometer Gear Make Napco , Gear Box Oil Retainer Make Lokesh , Gear Box Oil Seal Make Pioneer , Gear Box Packing Make Victor , Gear Box Taape Packing Make Victor , Gear Changer Sleeve Make Gajra , Gear Counter Gear Big 5 Gear Wala Make Gajra , Gear Counter Gear Small 5 Gear Wala Make Gajra , Gear Counter Shaft Make Gajra , Gear Foundation Make Vicas , Gear Hosing Bolt Make Tvs , Gear Lever Make Main , Gear Lever Top Cover Assy. 3 Gear Wala Make Main , Gear Lock Make Nepco , Gear Main Shaft 3 Gear Make Gajra , Gear Main Shaft Bearing Make Skf , Gear Main Shaft Pilot Bearing Make Skf , Gear Saconizer Ring With Hubmake Gajara , Gear Shaft Reverse Make Gajra , Gear Synchronising Ring Top & Third Make Gajra , Gear Synchronizing Assy. Complete Make Gajra , Gear Tapa Assy Complete Make Main , Gear Tapa Bolt Make Tvs , Gear Top Dog Kit Make Mahindra , Gear Top Shaft 3 Gear Make Mahindra , Gear Top Shaft 5 Gear Make Gajara , Gear Top Shaft Bearing Make Skf , Gear Top Shaft Roller Make Nrb , Injectornozzle Copper Woisher Make Mico , Injector Full Gaskit Make Victor , Injector Nozzle Over All Kit Make Mico , Injector Nozzle Pipe Make Mico , Injector Pump Over All Kit Make Mico , Jeep Pijo540 Clutch Taan , Jeep Pijo540 Clutch Taan Hundi , Jeep Pijo540 Diesel Tank Cap , Jeep Pijo540 Diesel Tank Hose Piajo , Jeep Pijo540 Radiator Cap , Jeep Pijo540 Silencer Manifold Stud , Jeep Pijo540 Silencer Packing , Jeep Pijo540 Stud Removing In Silencer , Jeepthar Block Lathe Work , Jeepthar Crank Repainring , Jeepthar Engine Connecting Rod Bush , Jeepthar Engine Foundation Frt , Jeepthar Engine Liner Rubber Ring , Jeepthar Engine Oil Pump Assy. , Jeepthar Main Bearing , Jeepthar Thrust Woisher , Jeepthar Wiper Machine , Kamani Aade Bolt Make Tvs , Kamani Bracket Front Make Napco , Kamani Bracket Rear Make Napco , Kamani Bush Front Make Napco , Kamani Bush Rear Make Napco , Kamani Center Bolt Front Make Lokesh , Kamani Center Bolt Rear Make Lokesh , Kamani Jhula Front Make Napco , Kamani Jhula Rear Make Napco , Kamani Katter Pin Make Napco , Kamani Patta Badane Wala Make Jaivijay , Kamani Patta Clip Wala Front Makejaivijay , Kamani Patta Main Front Make Jaivijay , Kamani Patta Main Rear Makejaivijay , Kamani Patta Second Front ( Mada ) Jaivijay , Kamani Patta Second Rear ( Mada ) Jaivijay , Kamani Pin Front Make Super , Kamani Pin Rear Make Lokesh , Kamani Rubber Bush Make Super , Kamani Thiya Front Make Napco , Kamani Thiya Rear Make Super , Kamani U Clamp Front Make Super , Kamani U Clamp Rear Make Napco , Kin Pin Bottam Plate Make Napco , King Pin Bearing Make Mahindra , King Pin Bush Make Mahindra , King Pin Set Make Mahindra , King Pin Shim 4 Hole Make Napco , King Pin Spandlemake Kafila , King Pin Thrust Bearing Make Lms , Main Shaft [ Mahindra Ki ] Make Gajara , Master Cylinder Double Piston Make Tvs , Milometer Chain Make Pricol , Milometer Gear Make Mahindra , Milometer Valve With Holder Make Napco , Mjeep 1St Gear , Mjeep 1St Gear ( Di ) , Mjeep 3Rd Gear ( Di ) , Mjeep 4 Gate Curtain Making , Mjeep Accelerator Paddle Rubber , Mjeep Accelerator Return Spring ( Pump ) Di , Mjeep Air Cleaner Hose , Mjeep Air Filter , Mjeep Balance Rod , Mjeep Balance Rod Bolt , Mjeep Balance Rod Clamp , Mjeep Balance Rod Gutke , Mjeep Bearing ( 11 Charre ) , Mjeep Bearing Sheet , Mjeep Bonut Hook Kit , Mjeep Bonut Hook Nut Bolt 10 No. , Mjeep Brake Booster Kit , Mjeep Brake Booster Repairing , Mjeep Brake Caliper Kit , Mjeep Brake Caliper Repairing , Mjeep Brake Disc , Mjeep Brake Disc Me Cut Lagwana , Mjeep Brake Liner Lock Kit , Mjeep Brake Master Cylinder , Mjeep Brake Master Cylinder Me Kit Fitting , Mjeep Brake Pad , Mjeep Brake Paddle Bush Fitting , Mjeep Brake Paddle Namda Kit , Mjeep Brake Paddle Pin , Mjeep Brake Paddle Rubber , Mjeep Brake Pipe , Mjeep Brake Shoe , Mjeep Brake Thali , Mjeep Brake Thali Polish Cut , Mjeep Bush Fitting , Mjeep Cage Body Opening Fitting , Mjeep Cage Body Repairing , Mjeep Center Bolt 3 3 Soot , Mjeep Center Bolt 4 , Mjeep Central Mirror ( Thar ) , Mjeep Central Mirror Screw ( Thar ) , Mjeep Charre , Mjeep Chokdi Pin , Mjeep Clamp Patti ( Thar ) , Mjeep Clutch Cylinder Lower , Mjeep Clutch Cylinder Pipe , Mjeep Clutch Cylinder Upper , Mjeep Clutch Fark Spring , Mjeep Clutch Kit Lower , Mjeep Clutch Kit Upper , Mjeep Clutch Paddle Return Spring , Mjeep Clutch Paddle Rubber , Mjeep Clutch Pin ( Thar ) , Mjeep Clutch Taan Bolt , Mjeep Clutch Valve Joint , Mjeep Coolent Bottle , Mjeep Counter , Mjeep Counter Bearing ( Di ) , Mjeep Counter Gear Charre , Mjeep Counter Shaft Ki Sheem , Mjeep Counter Shim Woisher , Mjeep Cr Bearing 10 No. , Mjeep Crank Side Brass , Mjeep Crank Side Brass Welding & Turning , Mjeep Crown Pinion Bearing , Mjeep Diesel Filter , Mjeep Diesel Main Pipe , Mjeep Diesel Tank Dhakkan ( Thar ) , Mjeep Diesel Tank Hose Pipe Clip , Mjeep Differential Lock Patti , Mjeep Differential Packing , Mjeep Differential Woisher , Mjeep Door Glass , Mjeep Door Inner Handle ( Lhs ) , Mjeep Door Lock Rhs , Mjeep Door Lock Screw , Mjeep Door Outer Handle , Mjeep Double Benjo Pipe 8 Ft 19X19 , Mjeep Drum Polish , Mjeep E.G.T. Bearing , Mjeep Engine Foundation Nut Bolt ( Di ) , Mjeep Engine Foundation Thhiya , Mjeep Engine Oil Filter , Mjeep Engine Servicing , Mjeep Feed Pump , Mjeep File 2 Flat , Mjeep Fitting Rubber Screw & Cut Woisher , Mjeep Foot Valve 4 , Mjeep Front Brake Hose , Mjeep Front Kamani 3 No Patta , Mjeep Front Kamani Clip 2.5 , Mjeep Front Kamani Clip 3 , Mjeep Front Kamani Patta 28 , Mjeep Front Kamani Patta 33.5 , Mjeep Front Kamani Rear Mouth Bush , Mjeep Front Main Glass , Mjeep Front Main Glass Fitting , Mjeep Gear Danda Lattu , Mjeep Gear Tapa Kit , Mjeep Gear Tapa Repairing , Mjeep Glass Frame Fitting Hook Set , Mjeep Glass Frame Lower Hitting Rubber , Mjeep Glass Sliding Handle , Mjeep Glass Velvet Channel , Mjeep Grease Gun ( Di ) , Mjeep Hand Brake Cable , Mjeep Head Bolt , Mjeep Head Gaskit , Mjeep Head Guide , Mjeep Head Se Nozzle Nikalna , Mjeep Head Seat ( Thar ) , Mjeep Head Servicing , Mjeep Head Valve , Mjeep Head Valve Spring , Mjeep Hood Repairing , Mjeep Hose Pipe ( Di ) , Mjeep Hub Bearing Front ( Thar ) , Mjeep Hub Oil Seal Front ( Thar ) , Mjeep Injector Nozzle ( Di ) , Mjeep Injector Nozzle Servicing , Mjeep Injector Nozzle Woisher , Mjeep Injector Pump Servicing , Mjeep Kamani Clip 1.5 , Mjeep Kamani Clip 2 , Mjeep Kamani Tikdi , Mjeep Kangan Bearing , Mjeep Kin Pin Gutke , Mjeep King Pin Bolt 14 No. , Mjeep Liner , Mjeep Liner Cutting & New Fitting , Mjeep Liner Fitting , Mjeep Lock Kit , Mjeep Lock Shaft , Mjeep Lower Clutch Pipe , Mjeep Main Line Boring , Mjeep Main Oil Seal , Mjeep Main Shaft Lock ( Di ) , Mjeep Master Cylinderkit Major , Mjeep Master Cylinder Kit Fitting , Mjeep Master Cylinder Kit Major , Mjeep Nakal Bolt 13 No. , Mjeep Nakal Bolt 14 No. , Mjeep New Seat Making , Mjeep Nozzle Pipe 02 No. , Mjeep Oil Chamber ( Di ) , Mjeep Oil Filter , Mjeep Oil Switch , Mjeep Packing Kit , Mjeep Pijo540 Engine Foundation With Nut Bolt , Mjeep Pijo540 Fuel Motor , Mjeep Pinion Nut , Mjeep Pinion Packing , Mjeep Pinion Sim , Mjeep Pipe Jointer ( 10Mm ) , Mjeep Piston Ring , Mjeep Popup Knob , Mjeep Pressure Plate , Mjeep Radiator Hose Pipe , Mjeep Rc Lock , Mjeep Rear Brake Patti With Bulb , Mjeep Rear Gear Plate , Mjeep Rear Kamani Front Mouth Bush , Mjeep Rear Kamani Patta 32 Tikdi , Mjeep Rear Kamani Patta 44 , Mjeep Rear Kamani Rear Mouth Bush , Mjeep Release Bearing , Mjeep Return Valve , Mjeep Reverse Big Gear , Mjeep Reverse Small Gear , Mjeep Rocker Stud With Nut , Mjeep Seat Cover Making , Mjeep Seat Repairing , Mjeep Self Bendex , Mjeep Side Glass ( Lhs ) , Mjeep Silencer Nut Bolt 13 No , Mjeep Silencer Patti , Mjeep Silencer Rubber , Mjeep Steering Bearing , Mjeep Steering Box Assy. ( Thar ) , Mjeep Steering Box Nut Bolt Big , Mjeep Steering Box Nut Bolt Small , Mjeep Steering Box Repairing , Mjeep Steering Box Stat Removing , Mjeep Steering Box Thhiye Bolt Removing , Mjeep Steering Bush , Mjeep Steering Cross , Mjeep Steering Oil , Mjeep Steering Oil Seal , Mjeep Steering Sheem , Mjeep Survey Cylinder Kit Major , Mjeep Survey Me Kit Fitting , Mjeep Tailgate Lock , Mjeep Tailgate Lock Thessi Knob , Mjeep Tailgate Outer Handle , Mjeep Tailgate Thessi , Mjeep Tapit Cover Ki Ring , Mjeep Thali Bolt Dalana , Mjeep Thali Bolt Nikalana , Mjeep Thar Di Clutch Plate , Mjeep Thar Di Fuel Pump Motor , Mjeep Thar Shockup Front , Mjeep Thhiye Ke Bolt , Mjeep Tie Rod End , Mjeep Timing Oil Seal , Mjeep Tube Repairing , Mjeep Turbo , Mjeep Tyrod Complete , Mjeep U Clamp , Mjeep U Clamp Plate , Mjeep Vaccume Pipe ( Thar ) , Mjeep Valve Catcher , Mjeep Valve Oil Seal , Mjeep Verm Rod , Mjeep Water Body Assy , Mjeep Water Pump , Mjeep Wheel Cap ( Di ) , Mjeep Wheel Disc ( Thar ) , Mjeep Wiper Blade , Mjeep Wiper Motor Patti ( Round ) , Mjeep Woisher , Mjeep Woisher Plan , Mjeep Woisher Spring , Mounting Bolt Kit Make Tvs , Mudguard Rubber Make Durga , Nakal Ka Cock Make Napco , Nakal Left Side Make Super , Nuckle Kit Make Napco , Paddle Namda Kit Make Napco , Pressure Plate Assy. Make Mahindra , Pressure Plate Bolt 13 No. Make Tvs , Pressure Plate Reapir Kit Make Napco , Propelloru.Clamp [ U.J.Cross Ka ] Make Napco , Propellor Shaft Cross Holder Make Rds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Half Yog Make Rds , Propellor Shaft Nut Bolt Make Tvs , Propellor Shaft Teeth Front Make Rds , Propellor Shaft Teeth Rear Make Rds , Propellor Shaft U J Cross Make Rds , Propellor Sllveyoke Assy Make Kafila , Push Rod Complete Make Balcon , Push Rod Repair Kit Make Balcon , Radiator Fan Make Napco , Radiator Foundation Make Rawart , Radiator Hose Pipe Clip Make Wikman , Radiator Hose Pipe Radiator ( Lower ) Make Npr , Radiator Hose Pipe Radiator ( Upper ) Make Npr , Shock Up Bush Make Gabriel , Shockup Front Make Gabriel , Shockup Rear Make Gabriel , Side Door Glass Make Davi , Side Door Glass Mechine Make Karan , Side Door Glass Rubber Channel Make Lacto , Silencer Assy. Complete Make Himos , Silencer Clip With Bolt Nut Make Napco , Silencer Kothi Ke Ghutke Make Npr , Silencer Kothi Make Hemos , Silencer Manifold Pipe Make Hemos , Silencer Packing Make Napco , Silencer Pipe Make Hemos , Silencer Tail Pipe Make Hemos , Steering Bearing Make Delux , Steering Box Assembly Complete Make Main , Steering Bush Make Napco , Steering Cross Assy. Make Main , Steering Oil Seal Make Pioneer , Steering Packing Make Napco , Steering Rod Make Main , Steering Sector Shaft Make Main , Steering Verm Assy. Make Main , Steering Wheel Make Lacto , Stop Wire Complete Make Napco , Tie Rod Assy Make Karan , Tie Rod End Kit Make Kaffila , Tie Rod End Make Kaffila , Wheel Alignment , Wheel Bearing Big Front Make Skf , Wheel Bearing Big Rear Make Skf , Wheel Bearing Small Front Make Skf , Wheel Bearing Small Rear Make Skf , Wheel Cylinder Assy. Front Make Tvs , Wheel Cylinder Assy. Rear Make Tvs , Wheel Cylinder Kit Front Make Tvs , Wheel Cylinder Kit Rear Make Tvs , Wheel Disc Front Make Godrej , Wheel Disc Rear Make Godrej , Wheel Lock Woisher Front Make Napco , Wheel Nut Bolt Front Make Tvs , Wheel Nut Bolt Rear Make Tvs , Wheel Oil Seal Front Make Pioneer , Wheel Oil Seal Rear Make Pioneer , Wheel Tube Gulla Check Nut Make Tvs , Whell Hub Rear Make Super , 7. Tata 1210 1210 1 / 2 13 No. Nut Bolt , 1210 13 No. Spring Woisher , 1210 1St Gear Changer Lever , 1210 Alternator Taan , 1210 Axle Me Kangani Fit Karna , 1210 Bearing Lock 13 No. , 1210 Bearing Lock 2209 , 1210 Bend 6 , 1210 Block Se Tuta Bolt Nikalna & Thread Banana , 1210 Brake Alter Patti , 1210 Brake Liner Opening Fitting , 1210 Brake Paddle , 1210 Brake Paddle Pin Bush Fitting , 1210 Brake Valve Mechine Me Kit Fitting , 1210 Brass Material Filling In Block , 1210 Cage Body Repairing , 1210 Center Bearing Lock , 1210 Center Bearing Opening Fitting , 1210 Center Bearing Sturd , 1210 Clutch Paddle , 1210 Clutch Plate Facing ( Dhagewali ) Gb40 , 1210 Clutch Plate Facing Fitting , 1210 Counter Gear Ki Chaabi , 1210 Counter Gear Ki Lock , 1210 Counter Gear Opening Fitting Gb30 , 1210 Counter Gear Tightling , 1210 Counter Key , 1210 Counter Lock , 1210 Counter Opening Fitting , 1210 Counter Shaft Rear Fitting , 1210 Cr Bush Fitting , 1210 Ddu Machine Kit Fitting , 1210 Dhadi Ke Muh Me Maal Bharkar Turning Karna , 1210 Dhadi Repairing , 1210 Differential Handi Me Thread Banana , 1210 Differential Oil Drain Cock , 1210 Differential Pilot Bearing Lock Big , 1210 Differential Pilot Bearing Lock Small , 1210 Differential Tube Ke Gulle Me Thread Making , 1210 Double Benjo Pipe 84 , 1210 Drum Cut Polish , 1210 Fark Lever , 1210 Fevi Bond , 1210 Field Bolt Soldering , 1210 First Second Liver Complete , 1210 Flyweel Hole Drilling , 1210 Flywhell Cut Polish , 1210 Full Engine Servicing , 1210 Gear Changer Lever , 1210 Gear Cover Packing ( Tv1 ) , 1210 Gear Danda Kit , 1210 Gear Tapa Fitting , 1210 Gear Tapa Repairing , 1210 Gear Woisher , 1210 Glass Fitting , 1210 Gulla Shim No. 19 , 1210 Half Yoke Opening Fitting , 1210 Hub Bearing Fitting , 1210 Hub Bolt Fitting , 1210 Hub Ka Lock Katora Fitting , 1210 Hub Katora 13 No. Bearing , 1210 Hub Katora Lock , 1210 Hub Me Kangani Fit Karna , 1210 Injector Nozzle Servicing , 1210 Injector Pump Servicing , 1210 Intercooler Hosepipe , 1210 Kamani Clip 14 , 1210 Kamani Ke Thhiye K Chasis Me Hole Karna , 1210 Kit Fitting In Master Cylinder , 1210 Liner Fitting , 1210 Liner Gulli Lock , 1210 Liner Nails 13 No. Nut , 1210 Lock Katori , 1210 Master Cylinder Repairing , 1210 Nut Bolt 17 No. 1 , 1210 Oil Filter Packing , 1210 Oil Filter Ring Brass , 1210 Oil Pump Assy. With Jaali , 1210 Oil Pump Jaali , 1210 Patti Par Maal Lagana , 1210 Popular Shaft 1 / 2 Decreasing , 1210 Popular Shaft Pipe 1.5 Increasing , 1210 Popular Shaft Rear Teeth Nut , 1210 Pressure Platecut Polish , 1210 Pully Bush , 1210 Radiator Fitting Nut Bolt , 1210 Rear Brake Cam , 1210 Rear Teeth Opening Fitting , 1210 Reverse Fank Bansi , 1210 Reverse Gear Changer Lever , 1210 Reverse Gear Lock , 1210 Roof Repairing , 1210 Seat Cover Fitting , 1210 Seat Cover Making & Fitting , 1210 Seat Cushing , 1210 Seat Repairing , 1210 Silencer Packing 3 Hole , 1210 Spring Woisher Packet , 1210 Steering Adjusting Bolt , 1210 Steering Box , 1210 Steering Check Nut 32 No. , 1210 Steering Check Nut Lock , 1210 Steering Cross Bolt , 1210 Steering Uj Corss Bolt , 1210 Stud , 1210 Survey Bracket , 1210 Tapit Cover Ring , 1210 Third Top Liver Complete , 1210 Thread Lock , 1210 Twin Gear , 1210 Twin Gear Opening Fitting , 1210 U Clamp 13 ( No. 270 ) , 1210 Valve 4 , 1210 Water Pump Major Kit Fitting , 1210 Weight Bolt , 1210 Weight Bolt Removing , 1210 Wheel Steering Lp1210 , 1210 Woisher 27 No. , A.C.Piece Make Mpr , A.C.Ring Make Goetzs , Accelarator Panja Make Gmi , Accelator End Make Airo , Accelator Rod Make R.P.W , Accelator Spring Make Olma , Accelator Tan Small Make Olma , Accelerator Taan S-Model Make Olma , Air Cleaner Assy Make Airo , Air Cleaner Clip Lower Side With Threadairo , Air Cleaner Rubber Make Rider , Air Cleaner Slu Rubber Small Rider , Air Clener 1612 Make Airo , Air Clener Clip 1612 Make Airo , Air Clener Hose 1612 Make Rider , Air Compressure Head Make Tvs , Air Compressure Kit Complite Make Tvs , Air Compressure Oilseal Make Rider , Air Filter Assy Make Mico , Air Meter Pressure Piperandeep , Air Pressure Meter Make Pricol , Air Pressure Pipe 84 Pvc Make Randeep , Air Pressure Pipe Make Randeep , Air Pressure Tank Bracket Pattitelco , Air Tank Brackat Make Telco , Air Tank Clip Make Hd , Air Tank Filter Machine Make Tvs , Air Tank Make Telco , Air Tank Pipe Steel Make Randeep , Air Tank Rubber Make Rider , Air Tank Valve Brass Make Tvs , Air Tee Make Olma , Air Went Screw Make Olma , Alter Bolt Kit Make Olma , Ampere Meter Make Pricol , Arm Nut Bolt Make Tvs , Axle Make Gajara , Axle Packing 6 Hole & 8 Hole Make Banco , Axle Plate 6 Hole & 8 Hole Make Olma , Axle Plate Bolt Make Tvs , Axle Rod Make Olma , Banjo Bolt Master Cylindermico , Benjo Tee Make Olma , Benjo Woisher Make Olma , Bharti Voisher Make Olma , Bonut Gutka Make Rider , Brake Alter Bolt Make Tvs , Brake Blading Screw Make Olma , Brake Bottle Pipe Make Randeep , Brake Cam Bush Make Tvs , Brake Drum Front Make Telco , Brake Hose Front Make Tvs , Brake Hose Pipe Rubber Make Tvs , Brake Hose Rear Make Tvs , Brake Kit 3 / 49 Unloader Valve Kittvs , Brake Liner Front With Rivit Tvs , Brake Liner Gulli Make Olma , Brake Liner Gutke Make Olma , Brake Liner Lock Make Olma , Brake Liner Patti Make Olma , Brake Liner Rear With Rivittvs , Brake Liner Spring Make Airo , Brake Lock Katori Make Olma , Brake M C Kit 6334 Make Tvs , Brake Master Cylinder Kit ( Double Tendum ) Tvs , Brake Master Cylinder Kit 57 No.Tvs , Brake Master Cylinder Make Tvs , Brake Master Cylinder Tee Make Tvs , Brake Oil Bottle Make Olma , Brake Oil Dabbi Of Master Cylinderolma , Brake Pipe ( Master Cylinder ) Steelrandeep , Brake Pipe Front Steel Make Randeep , Brake Pipe Steel Rear Make Randeep , Brake Shoe Front Make Tvs , Brake Shoe Rear Make Tvs , Brake Spring Front Make Olma , Brake Survey Kit 5 / 3 Make Tvs , Brake Survey Machine Complete Assy. Make Tvs , Brake Survey Piston Kit 2 / 24Tvs , Brake Survey Piston Kit Complete 2 / 21Tvs , Brake Survey Repair Kit 2 / 10Tvs , Brake Tee Make Airo , Brake Thali Nut Bolt Make Tvs , Brake Thali Rear Make Tata , Brake Unloader Valve Machine New Model Make Tvs , Brake Unloder Valve Machine 3 / 49Tvs , Break Drum 8 Hole 50 N0. Reartelco , Break Kem Rear Make Telco , Break Paddle Bush Make Delta , Break Paddle Pin Make Delta , Break Pipe Steel Double Banjo Randeep , Breake Bottle Make Olma , Breake Drum Front Make Telco , Breake Kit Master Cylinder 5 / 3Tvs , Breake Kit Survey 6902 Make Tvs , Breake M C Kit Double Tendum 6496Tvs , Breake Master Cylinderkit Major Make Tvs , Breake Master Cylinder Assembly Double Tendumtvs , Breake Pipe 144 N0. Make Randeep , Breake Pressure Pipe Make Randeep , Breake Servotee Make Tvs , Breake Servo Booster Assytvs , Breake Servo Kit Major Make Tvs , Breake Sleeve Make Olma , Breake Thali Complite Make Telco , Bumper Ke Nut Bolt Make Tvs , Chasis Cross Member Foundation Rider , Chasis Cross Member Kaanm Brand , Chasis Cross Member Nut Bolttvs , Clutch & Brake Padel Bushdelta , Clutch Fark Cone Make Olma , Clutch Fark Lever Bearing Make Olma , Clutch Fark Lever Make Olma , Clutch Fark Make Olma , Clutch Fark Patti Make Olma , Clutch Finger Kit ( 4 ) Finger ( 40 ) Ca , Clutch Finger Kit 3 Finger 30 Make Ca , Clutch Hosing 40 Make Gajra , Clutch Hosing Bolt Make Tvs , Clutch Hosing Gb 30 Make Gajara , Clutch Hub Gb 30 Make Rds , Clutch Hub Gb 40 Make Rds , Clutch Paddle Rubber Make Rider , Clutch Padel Pin Make Delta , Clutch Pin Make Delta , Clutch Plateka Fencing 40 Rane / Ca , Clutch Plate 30 Make Rane / Ca , Clutch Plate 40 Make Rane / Ca , Clutch Plate Fencing 30 Makerane / Ca , Clutch Release Bearing 1888180 Make Skf , Clutch Rod Make Olma , Clutch Tan Long Make Olma , Dash Board Rubber Ghutke Front [ Cabin ] Rider , Dash Board Rubber Ghutke Rear [ Cabin ] Rider , Dash Board Thhiya Make M Brand , Deshboard Nut Bolt Make Tvs , Diesel Connection Pipe Make Rider , Diesel Filter 1.1 Lit. Make Mico , Diesel Filter Bowl Make Mico , Diesel Filter Plate Make Mico , Diesel Filter Thhia Make R.P.W , Diesel Return Pipe [ Main ] Make Randeep , Diesel Return Pipe Ironrandeep , Diesel Tank Jali With Nut Make Airo , Diesel Tank Patti Make H.D , Diesel Tank With All Fittiting Completetelco , Differential Cover Jamshedpurtelco , Differentiol Cage Body Bolttvs , Differentiol Crown Adjusting Bolt Tikditvs , Differentiol Crown And Pinion Make Gajra , Differentiol Crown Bearing ( 32213 ) Skf , Differentiol Crown Bewal Woisher Make Airo , Differentiol Crown Cage Bodytelco , Differentiol Crown Make Gajara , Differentiol Crown Packing Make Banco , Differentiol Crown Side Bearin 47487Skf , Differentiol Crown Side Check Nuttvs , Differentiol Crown Spider Kit Complete Make Star , Differentiol Crown Star Woisher Std Make Airo ( 1210 Differentiol Crown Star Woisher ) , Differentiol Crown Stud + Nuttvs , Differentiol Crown Thali Bolttvs , Differentiol Pilot Bearingskf , Differentiol Pinion Bearingskf , Differentiol Pinion Check Nut Big Make Tvs ( 1210 Differentiol Pinion Check Nut Big ) , Differentiol Pinion Crown Kagajara , Differentiol Pinion Diston Slur.P.W , Differentiol Pinion Flanch Make Rds , Differentiol Pinion Flanch Woisherolma , Differentiol Pinion Jalebi Woisherairo , Differentiol Pinion Nut Make Gs , Differentiol Pinion Oil Sealrider , Disel Tank Cock Make R.P.W , Disel Tank Dhakkan Compliter.P.W , Disel Tank Rubber Make Rider , Disk Repairing 9.00X20 / 10.00X20 , Door Glass Mechine Make Ci , Door Lock + Handle With Key Make Ci , Double Banjo Pipe 10 Feet Longrider , Double Banjo Pipe 30 Longrider , Double Benjo Pipe 144 Inch Stee Longrider , Double Benjo Pipe 18 Inch Long Rider , Double Benjo Pipe 24 Inch Make Rider , Double Benjo Pipe 36 Inch Make Rider , Double Benjo Pipe 48 Inch Make Rider , Double Benjo Pipe 60 Inch Make Rider , Double Benjo Pipe 72 Inch Make Rider , Dumper Pad Make Rider , Dumper Pad Nut Bolt Make Tvs , Engine Begin Bearing Make Kirloskar , Engine Block Make Telco , Engine Cam Shaft Make Telco , Engine Chamber Bolt No.10 Make Tvs , Engine Chamber Make Telco , Engine Chamber Packing Make Banco , Engine Connectingrod Bolt Make Tvs , Engine Connecting Bearing Platetelco , Engine Connecting Rod Bushbanara , Engine Connecting Rod Make Telco , Engine Crank Bearing 6204 Make Skf , Engine Crank Make Telco , Engine Crankcrank Grinding, Polish , Engine Cylinder Liner ( Sleeve ) Tiger , Engine Foundation Bolt Front No.22 With Washertvs , Engine Foundation Bolt Rear No.19 With Washertvs , Engine Foundation Front Make Rider , Engine Foundation Rear Make Rider , Engine Foundation Thhiya Make Metro , Engine Free Chamber Make Banco , Engine Free Chamber Ring Make Banco , Engine Gaskit Full Make Benko , Engine Gaskit Half Make Benko , Engine Head Guide, Headseat Opening Fitting And Griding , Engine Head Make Telco , Engine Head Seat Make Evl , Engine Head State Make Tvs , Engine Head Valve Guide Make Evl , Engine Head Valve Make Evl , Engine Head Washer Make Airo , Engine Helper Ring Make Mpr , Engine Kaan Nut Bolt Make Tvs , Engine Kaan With Nut Bolt Make Tvs , Engine Kem Bush Make Kirlosker , Engine Kem Tickli Aluminiummpr , Engine Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting , Engine Main Bearing Make Banara , Engine Main Oil Seal Make Pioneer , Engine Nagin Pipe Make Randeep , Engine Oilmeter Pipe Make Randeep , Engine Oil Chamber Nut & Bolt Make Tvs , Engine Oil Filter Make Mico , Engine Oil Gauge + Outer Make Olma , Engine Oil Gauge Make R.P.W , Engine Oil Jhonga Pipe Make Rider , Engine Oil Pipe Steel Make Randeep , Engine Oil Pump Gear Make Telco , Engine Oil Pump Valve Make Telco , Engine Oil Seal 1312 Make Pioneer , Engine Oil Zonga Make R.P.W , Engine Piston Make Mpr , Engine Piston Ring Make Mpr , Engine Pully Bush Make R.P.W , Engine Pully Make R.P.W , Engine Rocker Bush Make Mpr , Engine Rocker Shaft ( Baasuri ) Mpr , Engine Tapit Cover Dhakkan Make R.P.W , Engine Tapit Cover Make Telco , Engine Tapit Cover Packingbanco , Engine Tapit Screw Make Airo , Engine Thrust Voisher Make Banara , Engine Timer Gear Big Make Telco , Engine Timer Gear Bolt Make Tvs , Engine Timer Gear Small Make Telco , Engine Timer Kit Make Telco , Engine Timing Oil Seal Make Rider , Engine Water Jacket Pipe Tee Olma , Engine Water Pump Assy. Make Indosuri , Engine Water Pump Bearing Make Skf , Engine Water Pump Hub Make Olma , Engine Water Pump Kit Majorindosuri , Engine Water Pump Major With Bearingindosuri , Engine Water Pump Packing Make Banco , Engine Water Pump Packing Pistol Shape Banco , Engine Water Pump Pipe Make Olma , Engine Water Pump Pulley Make Tata , Engine Water Pump Stud & Nuttvs , Engineoil Meter Make Pricol , Fan Belt No.571 Make Fenner , Fly Whell Assy 40 Make Telco , Front Main Glass With Rubber Channel Fittingatul , Front Wind Sheld Glass Lptatul , Front Wind Sheld Glass Lptrubber Chanelalp , Front Wind Sheld Glass Se Make Atul , Front Wind Sheld Glass Se Rubber Chanelalp , Fry Wheel Assembly Make Telco , Fry Wheel Bearing Make Skf , Fry Wheel Bolt Make Tvs , Fry Wheel Ring 30 Make Gajra , Fry Wheel Ring 40 Make Gajra , Fuel Pump Valve Kit Make Mico , Gear Bansuri Top 3Rd Make Gajra , Gear Batik Ring Make R.P.W , Gear Bearing 32207 Counter Make Skf , Gear Bearing Nu 209 Make Skf , Gear Bearing Nu 309 Make Skf , Gear Bearing Nu2209 Make Skf , Gear Bearing Qj 209 Make Skf , Gear Bearing Qj 309 Make Skf , Gear Box Bolt Make Tvs , Gear Box Chilam Gb 30 Make Delta , Gear Box Chilam Gb 40 Make Delta , Gear Box Oil Seal Make Rider , Gear Box Packing 40 Make Banco , Gear Box Packing Gb 30 Make Banco , Gear Butter Ring Gb 30 Make R.P.W , Gear Butter Ring Gb 40 Make R.P.W , Gear Changer Kangni 30 Make Gajra , Gear Changer Kangni 40 Make Gajra , Gear Changer Plate 30 Big Make Telco , Gear Changer Plate 30 Small Telco , Gear Changer Plate 40 Big Maketelco , Gear Chawal Charra Makenrb , Gear Chharra Spring Maker.P.W , Gear Chilam Bolt Make T.V.S. , Gear Chilam Oil Seal Make Rider , Gear Chilam Ring Make R.P.W , Gear Coller Bush Make R.P.W , Gear Counter Shaft Gb 30 Make Gajra , Gear Counter Shaft Gb 40 Make Gajra , Gear Counter Shaft Shim Thick Make R.P.W , Gear Counter Shaft Shim Thin Make R.P.W , Gear Danda 30 Make Telco , Gear Danda 40 Make Telco , Gear Danda Katora Gb 30 Makeolma , Gear Danda Katora Gb 40 Make Olma , Gear Danda Lattu Make Olma , Gear Danda Makkhi Gb 40 Make Airo , Gear Danda Spring Gb 30 Make Airo , Gear Danda Spring Gb 40 Make Airo , Gear Dande Ki Makkhi 30Make Airo , Gear Dog Kit Gb 30 Make T.V.S. , Gear Dog Kit Gb 40 Make T.V.S. , Gear Double Big Gb 30 Make Gajra , Gear Double Big Gb 40 Makegajra , Gear Double Small Gb 30 Make Gajra , Gear Double Small Gb 40 Make Gajra , Gear Engag. Second Third Gear Gb 30 Make Gajra , Gear Engaging Fourth Fifth Gear Gb 30 Makegajra , Gear Engaging Fourth Fifth Gear Gb 40Gajra , Gear Engaging Second Third Gear Gb 40 Gajra , Gear First Gb 30 Make Gajra , Gear First Gb 40 Make Gajra , Gear First Kangni 30 Make Gajra , Gear First Kangni 40 Make Gajra , Gear Flanch Gb 30 Make Rds , Gear Flanch Gb 40 Make Rds , Gear Fourth Gb 30 Make Gajara , Gear Fourth Gb 40 Make Gajara , Gear Fourth Slu Gb 30 Makegajara , Gear Fourth Slu Gb 40 Make Gajara , Gear Hose / Handi Gb 30 Makegajara , Gear Hose / Handi Gb 40 Make Gajara , Gear Hosing Bolt Maketvs , Gear Kangan Bearing Double Jali40 Make Deluxe , Gear Kangan Bearing Double Jali 30 Skf , Gear Kangan Bearing Gb 30 Make Skf , Gear Kangan Bearing Gb 40 Make Skf , Gear Kangan Bearing Slu 30 Makegajra , Gear Kangan Bearing Slu 40 Gajra , Gear Lever Gb 30 Make Telco , Gear Lever Gb 40 Make Telco , Gear Main Shaft Gb 30 Make Gajra , Gear Main Shaft Gb 40 Make Gajra , Gear Main Shaft Nut 30Make Tvs , Gear Main Shaft Nut Gb 40 Make Tvs , Gear Main Shaft Pilot Bearing 30 Make Skf , Gear Main Shaft Pilot Bearing 40 Make Skf , Gear Main Shaft Sheem Woisher 30 & 40 Make R.P.W ( Main Shaft Shim ) , Gear Packing Kit 1612 Makebanco , Gear Packing Kit Danda Showbanco , Gear Plate Milometer Gear30 Gajra , Gear Plate Milometer Gear40gajra , Gear Reverse Bearing Gb 30 Make Skf , Gear Reverse Bearing Gb 40 Make Skf , Gear Reverse Gb 30 Make Gajra , Gear Reverse Gb 40 Make Gajra , Gear Reverse Idoler Gb 30 Make Gajra , Gear Reverse Idoler Gb 40 Make Gajra , Gear Reverse Pin 30 Make Gajra , Gear Reverse Pin 40 Make Gajra , Gear Second Gb 30 Make Gajra , Gear Second Gb 40 Make Gajra , Gear Second Slu Gb 30 Make Gajra , Gear Second Slu Gb 40 Make Gajara , Gear Synchronising Ring 30 Make Gajra , Gear Synchronising Ring 40Gajra , Gear Tapa Boltgb 40 Make Tvs , Gear Tapa Bolt 30 Make Tvs , Gear Tapa Gb 30 Make Telco , Gear Tapa Gb 40 Make Telco , Gear Tapa Kit Gb 30 Make Gajra , Gear Tapa Kit Gb 40 Make Gajara , Gear Tapa Lever + Bansuri 30Gajara , Gear Tapa Lever + Bansuri 40Gajara , Gear Tapa Spring Gb 30 Make Olma , Gear Tapa Spring Gb 40 Make Olma , Gear Third Gb 30 Make Gajra , Gear Third Gb 40 Make Gajra , Gear Top Kangani Gb 30 Make Gajra , Gear Top Kangani Gb 40 Make Gajra , Gear Top Shaft Gb 30 Make Gajra , Gear Top Shaft Gb 40 Make Gajra , Gear Top Shaft Nut 30 Make Rana , Gear Top Shaft Nut 40 Make Rane , Gulla Sheem 13 No. Make R.P.W , Gulla Sheem 16No. Make R.P.W , Injectornozzle Over All Kitmico , Injector Diesel Connection Pipe Make Randeep , Injector Fuel Pump Assy. Make Mico , Injector Hand Primer Make Mico , Injector Nozzle Woisher Make Mico , Injector Pump Over All Kitmico , Injector Pump Pipe Mico Make Mico , Kamani Aade Bolt Make Tvs , Kamani Bush Front Make Gs , Kamani Bush Rear Gs Make Gs , Kamani Center Bolt 10 Make Gs , Kamani Center Bolt 12 Make Gs , Kamani Center Bolt 14 Make Gs , Kamani Center Bolt 16 Make Gs , Kamani Center Bolt 6 Make Gs , Kamani Center Bolt 7 Make Gs , Kamani Clip 4 Inch Make Heavy Duty , Kamani Clip 5 Inch Make Heavy Duty , Kamani Clip 6 Inch Make Heavy Duty , Kamani Clip Small 7 Inchheavy Duty , Kamani Clip Small 8Inchheavy Duty , Kamani Clip Small 9 Inchheavy Duty , Kamani Clip Small Make Heavy Duty , Kamani Hanger Bolt & Nut Make Tvs , Kamani Helper Palang / Khatiyags , Kamani Helper Thhiye Rear Make Gs , Kamani Jhula Front Make Gs , Kamani Jhula Rear Make Gs , Kamani Katter Bolt Make Tvs , Kamani Katter Patti Make Heavy Duty , Kamani Pattab No Helper Make Gs , Kamani Patta 3 No. Front Make Gs , Kamani Patta 3 No. Rear Make Gs , Kamani Patta 4 No. Front Make Gs , Kamani Patta 4 No. Rear Make Gs , Kamani Patta 5 No. Front Make Gs , Kamani Patta 5 No. Rear Make Gs , Kamani Patta 6 No. Front Make Gs , Kamani Patta 6 No. Rear Make Gs , Kamani Patta A No Helper Make Gs , Kamani Patta A No. Front Make Gs , Kamani Patta A No. Rear Make Gs , Kamani Patta B No. Front Make Gs , Kamani Patta B No. Rear Make Gs , Kamani Patta Mada Front Make Gs , Kamani Patta Mada Rear Make Gs , Kamani Patta Main Front Make Gs , Kamani Patta Main Helper Make Gs , Kamani Patta Main Rear Make Gs , Kamani Pin Front Make Gs , Kamani Pin Rear Make Gs , Kamani Repeat Make R.P.W , Kamani Tapper Patti Frontr.P.W , Kamani Thhiya Front Make Gs , Kamani Thhiya Rear Make Gs , Kamani U Clamp 10 Inch Make Gs , Kamani U Clamp 10 Make Gs , Kamani U Clamp 12 Inch Make Gs , Kamani U Clamp 14 Inch Make Gs , Kamani U Clamp 15 Inch Make Gs , Kamani U Clamp 16 Inch Make Gs , Kamani U Clamp 17 Inch Make Gs , Kamani U Clamp 18 Inch Make Gs , Kamani U Clamp 19 Inch Make Gs , Kamani U Clamp 20Inch Make Gs , Kamani U Clamp 22Inch Make Gs , Kamani U Clamp 23 Inch Make Gs , Kamani U Clamp 8 Inch Make Gs , Kamani U Clamp 9 Inch Make Gs , Kamani U Clamp Thhiya Make Gs , Kamani U Clamp Woisher Make R.P.W , Kamani Woisher Make R.P.W , King Pin Bearing Make Srmt , King Pin Bush Make Srmt , King Pin Complete Set Make Srmt , King Pin Lock Kit Make Srmt , Kit 25 / 8 Make Tvs , Kit 3 / 65 Make Tvs , Kit 6 / 8 Make Tvs , Milometer Chain ( Rod ) Make Pricol , Milometer Gear Make Pricol , Over Flow Banjo Bolt Make Mico , Over Flow Return Valve Make Mico , Pressure Pipe Make Tvs , Pressure Plate Bolt Make Tvs , Pressure Plate Cover 30 Make Ca , Pressure Plate Cover 40 Make Ca , Pressure Plate Gb 30 Make Ca , Pressure Plate Gb 40 Make Ca , Pressure Plate Spring Gb 30 Make Ca , Pressure Plate Spring Gb 40 Make Ca , Pressure Plate Tawa Gb 30 Make Ca , Pressure Plate Tawa Gb 40 Make Ca , Propel.Shaft Cent Bearing Complete 6208 Skf , Propeller Shaft Center Bearing Flanch Rds , Propeller Shaft Center Bearing Rubber All Sizerider , Propeller Shaft Center Bearing Rubber Cut Walarider , Propeller Shaft Centre Bearing 1612Skf , Propeller Shaft Centre Bearing Flanch 1612Rds , Propeller Shaft Centre Bearing Nut 1612Tvs , Propeller Shaft Full Yoke 1612Rds , Propeller Shaft Full Yoke Assy 1612Rds , Propeller Shaft Rear Teeth 1612Rds , Propeller Shaft Sleeve Yoke Assyrds , Propeller Shaft U.J.Cross 1612Rds , Propellor Shaft Center Bearing Coner.P.W , Propellor Shaft Center Bearing Thhiye Nut Bolttvs , Propellor Shaft Centre Bearing Nutgs , Propellor Shaft Centre Bearing Oil Sealrider , Propellor Shaft Centre Bearing Teethrds , Propellor Shaft Centre Bearing Thhiyer.P.W , Propellor Shaft Cross Holderrds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Half Yog Make Rds , Propellor Shaft Nut Bolt 17 No. Make Tvs , Propellor Shaft Teeth Rear Make Rds , Propellor Shaft U J Cross Make Rds , Propullar Shaft Rear Completetelco , Pump Cap Make R.P.W , Pump Packing Make Banco , Push Rod Complete ( With Ends ) Rds , Push Rod Kit Make Chhener , Quarter Pin Spandle Make R.P.W , Quterpin Tie Rod Make R.P.W , Radiator Fan 1210 Make Inter Nationl , Radiator Fan 1612 Make Inter Nationl , Radiator Foundation Make Rider , Radiator Taan Long Make Rider , Radiator Thermostat Valve Make R.P.W , Radiotor Hose Pipekit Make Rider , Radiotor Hose Pipe Clip Make Wikman , Radiotor Hose Pipe Damru Type Make Rider , Radiotor Hose Pipe L Type Make Rider , Radiotor Hose Pipe S Type Make Rider , Radiotor Hose Pipe State Make Rider , Sidedoor Glass Make Atul , Side Door Glass Rubber Channelalp , Silencer Clip Make Gmi , Silencer Clip Nut Bolt Make Tvs , Silencer Hockey Pipe Make Gmi , Silencer Kothi Clip With Nut Boltgmi , Silencer Kothi Make Gmi , Silencer L Type Pipe Make Gmi , Silencer Manifold Pipe Make Gmi , Silencer Patti Big Make Gmi , Silencer Tail Pipe Big Make Gmi , Silencer Tail Pipe Straight Make Gmi , Silincer Pipes Type Make Gmi , Steering Adjusting Bolt + Lock Tvs , Steering Alter Bolt Make Tvs , Steering Arm Make Gajara , Steering Arm Nut Make Tvs , Steering Arm O Ring Make Rider , Steering Bearing 509043 Make Skf , Steering Bolt 19 No. Make Tvs , Steering Box Packing Make Banco , Steering Box Stud Make Tvs , Steering Bush Brass Make Make Srmt , Steering Bush Make Rider , Steering Check Nut Make Rana , Steering Column Bush Make Rider , Steering Cross Assembly Make Rds , Steering Oil Seal Make Rider , Steering Packing Make Banco , Steering Sector Shaft Make Telco , Steering Verm Rod Assy. Make Telco , Steering Verm Rod Cone Make Olma , Steering Wheel Lpt Make R.P.W , Steering Wheel S Model Make R.P.W , Tempreture Meter Make Pricol , Third Arm Bolt Make Tvs , Third Arm Make Telco , Tyrod Arm Make Rds , Tyrod End Make Chhener , Tyrod Kit Make Chhener , Water Body Stud With Nut 13 No. Make Tvs , Water Jacket Pipe Make Olma , Water Jacket Pipe Packing Make Banco , Wheel Alignment , Wheel Bearing 30209 Make Skf , Wheel Bearing 32212 Make Skf , Wheel Bearing 32213 Make Skf , Wheel Bearing 32214 Make Skf , Wheel Bearing 32216 Make Skf , Wheel Bearing 33019 Make Skf , Wheel Bearing Front 30312 Make Skf , Wheel Bearing Front 32308 Make Skf , Wheel Bearing Front 565 Make Skf , Wheel Bolt With Nut Front Make Tvs , Wheel Bolt With Nut Rear Make Tvs , Wheel Check Nut 1210 Make Gs , Wheel Check Nut 1612 Make Gs , Wheel Check Nut O / S Make Gs , Wheel Check Std Make Gs , Wheel Cut Woisher 6 / 8 Make Olma , Wheel Cylinderwasher44 No. Make Tvs , Wheel Cylinder Assembly 1.5 Tvs Make Tvs , Wheel Cylinder Assembly Fronttvs , Wheel Cylinder Assembly Rear Tvs , Wheel Cylinder Washer 50 No Make Tvs , Wheel Disc Plate 8Mm Make R.P.W , Wheel Disk Plate 10Mm Make R.P.W , Wheel Hub Axle Kangni Rear Make Rds , Wheel Hub Steel 7 / 8 Hole Reartata , Wheel Lock Woisher + Makkhi Woisher Make R.P.W , Wheel Nut Rear 6 / 8 Make Tvs , Wheel Nut Rear 7 / 8 Make Tvs , Wheel Oil Seal Front Make Rider , Wheel Oil Seal Rear Make Rider , Wheel Oil Seal Spacer Make Airo , Wheel Ring+Kada 900X20 Make Sr , Wheel Spandle Nut Front Wheeltvs , Wheel Woisher Plane 6 / 8 & 7 / 8 Make Olma , 8. Tata 709 A.C Pistion Make Mpr , A.C Pistion Pin Make Mpr , A.C. Piece Make Kirloskar , A.C. Ring Make Goetze , Accelator Tann Small Make Olma , Acceletor End Make Rpw , Acceletor Tann Big Make Olma , Acceletor Wire Lpt Make Pricol , Air Cleaner Clip Make Wikman , Air Cleaner Hose Pipe Big Make Rider , Air Cleaner Hose Pipe Make Rider , Air Cleaner Make Airo , Air Cleaner Ring Make Rider , Air Compressure Head Packing Make Banco , Axel Bolt Make Tvs , Axel Kangni Make Rpw , Axel Packing Make Banco , Axel Plate Make Olma , Axle Kagani Wala Make Eye , Axle Stud Std & Nut Make Tvs , Axle Stud Wala Make Eye , Benjo Bolt Make Tvs , Bharti Voisher Make Rpw , Brakebooster 45 / 2 Make Tvs , Brake Alter Rachit Make Tvs , Brake Booster Kit Major Make Tvs , Brake Booster Rubber Make Tvs , Brake Booster Tee Make Tvs , Brake Bottle Make Rpw , Brake Dyefram Rubber 470130 Make Tvs , Brake Liner Front With Rivit Maketvs , Brake Liner Rear With Rivit Make Tvs , Brake Main Pipe ( 10 Feet ) ( Steel ) Make Randeep , Brake Master Cylinder Assy. Make Tvs , Brake Master Cylinder Kit Major Make Tvs , Brake Master Cylinder Kit Minor Make Tvs , Brake Master Cylinder Pipe No.10 Randeep , Brake Paddle Pin Make Delta , Brake Paddle Pin Nut Bolt Make Tvs , Brake Pipe Front Steel Make Randeep , Brake Pipe Rear Steel Make Randeep , Brake Thali Bolt Make Tvs , Break Liner Kit Make Tvs , Break Pipe T ( Of Master Cylinder ) Rpw , Cabin Foundation Make Rider , Cabin Foundation Nut Bolt Make Tvs , Chasis Cross Member Center Bearing Wala Make M Brand , Chasis Cross Member Engine Wala Make M Brand , Chasis Cross Member Gear Wala Make M Brand , Chasis Cross Member Nut Bolt Make Tvs , Clutch Cylinder Assy. Lower Make Tvs , Clutch Cylinder Assy. Upper Make Tvs , Clutch Cylinder Bottle Make Rpw , Clutch Cylinder Hose Make Tvs , Clutch Cylinder Kituppermajor Make Tvs , Clutch Cylinder Kit Lower Major Make Tvs , Clutch Fark Lever Cone Make Rpw , Clutch Fingerkit Make Ca , Clutch Fork Lever Make Rpw , Clutch Fork Lever Patti Make Rpw , Clutch Hub Make Rds , Clutch Plate Ka Facing Make Ca , Clutch Plate New Make Ca , Clutch Release Bearing Make Skf , Clutch Taan Make Olma , Defentional Crown Bearing Make Skf , Defentional Crown Pinion Nut Make Tvs , Defentional Crown Pinion Oil Seal , Defentional Crown Star Woisher Make Airo , Defentional Crown Thrust Woisher Standard Make Airo , Defentional Crown With Pinion Make Gajara , Defentional Packing Make Banco , Defentional Pinion Bearing Make Skf , Defentional Pinion Flanch Make Rds , Defentionalcrown Pilot Bearing Make Skf , Defentionalcrown Pinion Jalebi Woisher Make Airo , Defentionalcrown Spider Kit Make Gajra , Diesel Benjo Pipe Make Randeep , Diesel Connection Overflow Pipe Make Randeep , Diesel Connection Pipe Double Banjo Make Randeep , Diesel Filter Bowel 0.5 Lt Make Mico , Diesel Filter Plate Make Mico , Diesel Filter Thhiya Make Rpm , Diesel Filter Thhiya Nut Bolt Make Tvs , Diesel Tank Bracket Make Telco , Diesel Tank Cock Nut Jali Wala Make Rpw , Diesel Tank Patti Make H.D. , Diesel Tanki Complete Make Telco , Disk Reparing 7.50X16 Make Genuine , Door Glass Machine Make Ci , Door Lock With Handle Make Ci , Double Banjo Pipe 12 Make Randeep , Double Banjo Pipe 24 Make Randeep , Double Banjo Pipe 36 Make Randeep , Dumper Pad Make Rider , Dumper Pad Nut Bolt Make Rider , Engine Slu ( Air Block ) Make Gajra , Engine Begin Bearing Make Kirloskar , Engine Block Make Telco , Engine Connecting Rod Bolt Make Tvs , Engine Connecting Rod Make Telco , Engine Cranck Shaft Assy Make Telco , Engine Crank Bearing 6205 Make Skf , Engine Foundation Bolt Make Tvs , Engine Foundation Left / Right Make Rider , Engine Foundation Thhiye Make R.P.W , Engine Foundation Woisher Make Tvs , Engine Headgaskit Half Make Banko , Engine Head Compressure Pipe Make Randeep , Engine Head Free Chamber Ring Make Banco , Engine Head Gaskit Full Make Banko , Engine Head Make Telco , Engine Head Valve Catcher Make R.P.W , Engine Head Valve Guide Make Friends , Engine Head Valve Make Evl , Engine Head Valve Seal Make Goetze , Engine Head Valve Seat Make Cosmo , Engine Head Woisher Make Airo , Engine Kem Bush Make Banara , Engine Kem Shaft Make Telco , Engine Kem Tikli Make Airo , Engine Liner Lock Make Airo , Engine Liner Slu Make Tiger Power , Engine Main Bearing Make Kirloskar , Engine Main Oil Seal Make Pioneer , Engine Oil Chamber Make Telco , Engine Oil Chamber Packing Make Banco , Engine Oil Filter Make Mico , Engine Oil Filter Thhiya Make Santo , Engine Oil Gauge Inner & Outer Make Randeep , Engine Oil Pipe Make Randeep , Engine Oil Pressure Pipe Make Randeep , Engine Oil Pump Gear Set Make Tata , Engine Oil Pump Valve Make Tata , Engine Oil Zhonga Ring Make R.P.W , Engine Oil Zonga Make R.P.W , Engine Oil Zonga Pipe Make Rider , Engine Over Flowvalve Make Mico , Engine Pistion Pin Make Mpr , Engine Piston Ring Make Mpr , Engine Piston Set Make Mpr , Engine Rocker Box Chiriya Make Telco , Engine Rocker Bush Make Mpr , Engine Rocker Shaft Make Mpr , Engine Tapit Cover Complete Make Telco , Engine Tapit Cover Oil Zonga Make R.P.W , Engine Tapit Cover Packing Make Banco , Engine Tapit Cover Pipe Lohe Wala Make Olma , Engine Tapit Screw Make R.P.W , Engine Thrust Voisher Make Banara , Engine Timer Gear Make Tata , Engine Timer Kit Make Tata , Engine Timing Cover Packing Make Banco , Engine Timing Oil Seal Kada Make Kross , Engine Timing Oil Seal Make Pioneer , Engine Timing Plate Packing Make Banco , Engine Water Pump Assy Make Indosuri , Engine Water Pump Bearing 15123 Make Skf , Engine Water Pump Bearing 30204 Make Skf , Engine Water Pump Major Kit Make Indosuri , Engine Water Pump Packing Make Banco , Engineconnecting Bush Make Kirloskar , Fan Belt 1325 Make Fanner , Frontwind Sheld Glass Make Atul , Frontwind Sheld Glass Rubber Channel Make Alp , Fry Wheel Bolt Make Tvs , Fry Wheel Patti Make R.P.W , Fry Whell Bearing 6204 Make Skf , Frywheel Ring Make Gajra , Gear 2Nd Make Gajra , Gear 2Nd Slu Make Gajra , Gear 3Rd Make Gajra , Gear 3Rd Top Main Slu Make Gajra , Gear 4Thring Make Gajra , Gear 4Th & Top Wheel Ring Make Gajra , Gear 4Th Make Gajra , Gear 4Th Slu Make Gajra , Gear Bearing Nu 209 Make Skf , Gear Bearing Qj 209 Make Skf , Gear Bolt 22 No. Make Tvs , Gear Box Chilam Make Rds , Gear Box Foundation Cover Make R.P.W , Gear Box Packing Make Banco , Gear Butter Ring Make R.P.W , Gear Changer Kangani Make Gajra , Gear Changer Lever Make Telco , Gear Charra Spring Make Olma , Gear Chilam Oil Seal Make Rider , Gear Counter Bearing 30207 Make Skf , Gear Counter Bearing 30308 Make Skf , Gear Counter Gear Big Double Make Gajra , Gear Counter Shaft Make Gajra , Gear Counter Shaft Shim Make Olma , Gear Dandacomplete Make Telco , Gear Dande Ka Lattoo Make Olma , Gear Dande Ki Katori Make Olma , Gear Dande Ki Spring Make Olma , Gear Dog Kit Make Tvs , Gear Double Small Make Gajra , Gear First Engaging Make Gajra , Gear First Kangni Lohe Ki Make Gajra , Gear First Make Gajra , Gear First Ring Make Gajra , Gear Flanch Make Rds , Gear Foundation Make Rider , Gear Handi Make Gajra , Gear Handi Ofpto Make Gajra , Gear Kangan Bearing Double Jali Make Deluxe , Gear Kangan Bearing Make Deluxe , Gear Kangni Third & Fourth Make Gajra , Gear Lever End Big Make Rane , Gear Lever End Small Make Rane , Gear Liver Lock Make R.P.W , Gear Main Shaft Make Gajra , Gear Main Shaft Shim Make R.P.W , Gear Main Shaft Voisher Make R.P.W , Gear Oil Seal Make Rider , Gear Pilot Bearing 2028 Make Deluxe , Gear Plate Alluminium Complete Make Telco , Gear Reverse Bearing Make Skf , Gear Reverse Idoler Make Gajra , Gear Reverse Make Gajra , Gear Reverse Pin Make Gajra , Gear Reverse Woisher Make R.P.W , Gear Synchronising Ring Make Gajra , Gear Tapa Kit Lpt Make Gajra , Gear Third Ring Make Gajra , Gear Topplate Make Gajra , Gear Top Ring Make Gajra , Gear Top Shaft Make Gajra , Gear Top Shaft Nut Make Tvs , Injectorfuel Pump Assy. Make Mico , Injector Diesel Pipe L Type & Z Type Make Randeep , Injector Nozzle Over All Kit Make Mico , Injector Nozzle Pipe Make Mico , Injector Nozzle Voisher Make Mico , Injector Packing Make Banco , Injector Pump Glassy Complete Make Mico , Injector Pump Over All Kit Make Mico , Kamaniclip 5 Make Gs , Kamani Aade Bolt 13 No. Make Tvs , Kamani Aade Bolt Nut 21 No. Make Tvs , Kamani Bush Make Gs , Kamani Clip 3.5 Rear Make Gs , Kamani Clip 4 Rear Make Gs , Kamani Clip 6 Make Gs , Kamani Clip 7 Make Gs , Kamani Clip 8 Make Gs , Kamani Hanger Bolt 18 No. Make Tvs , Kamani Helper Thhiye Make Gs , Kamani Jhula Front Make Gs , Kamani Jhula Rear Make Gs , Kamani Katar Bolt Make Tvs , Kamani Patta 3 No. Front Make Gs , Kamani Patta 3 No. Rear Make Gs , Kamani Patta 4 No. Front Make Gs , Kamani Patta 4 No. Rear Make Gs , Kamani Patta 5 No. Front Make Gs , Kamani Patta 5 No. Rear Make Gs , Kamani Patta 6 No. Clipwala Front Make Gs , Kamani Patta 6 No. Clipwala Rear Make Gs , Kamani Patta 7 No. Front Make Gs , Kamani Patta 7 No. Rear Make Gs , Kamani Patta 8 No. Front Make Gs , Kamani Patta 8 No. Rear Make Gs , Kamani Patta A No. Front Make Gs , Kamani Patta A No. Helper Make Gs , Kamani Patta A No. Rear Make Gs , Kamani Patta B No. Front Make Gs , Kamani Patta B No. Helper Make Gs , Kamani Patta B No. Rear Make Gs , Kamani Patta Mada Front Make Gs , Kamani Patta Mada Rear Make Gs , Kamani Patta Main Front Make Gs , Kamani Patta Main Helper Make Gs , Kamani Patta Main Rear Make Gs , Kamani Pin Front Make Gs , Kamani Pin Rear Make Gs , Kamani Shim Thick Make R.P.W , Kamani Shim Thin Make R.P.W , Kamani Thhiya Front Make Gs , Kamani Thiya Rear Make Gs , Kamani U Clamp 10 Inch Make Gs , Kamani U Clamp 11 Inch Make Gs , Kamani U Clamp 12 Inch Make Gs , Kamani U Clamp 6 Inch Make Gs , Kamani U Clamp 7 Inch Make Gs , Kamani U Clamp 8 Inch Make Gs , Kamani U Clamp Bracket Make Gs , Kamanicenter Bolt 12 Make Gs , King Pin Set ( Incl.Pin Bush Bearing ) Make Srmt , Milometer Chain Make Pricol , Milometer Rod Make R.P.W , Pressure Plate Assembly ( Finger ) Make Ca , Pressure Plate Assy. Sunflower Make Ca , Pressure Plate Bolt Make Tvs , Pressure Plate Tawa Make Ca , Propellor Shaftcenter Bearing Bracket Nut Bolt Make Tvs , Propellor Shaft Center Bearing Bracket Make R.P.W , Propellor Shaft Center Bearing Complete Make Skf , Propellor Shaft Center Bearing Cone Make R.P.W , Propellor Shaft Center Bearing Flanch Make Rds , Propellor Shaft Cent. Bearing Rubber , Propellor Shaft Center Bearing Teeth Make Rds , Propellor Shaft Cross Holder Make Rds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Nut Bolt Make Tvs , Propellor Shaft Rear Teeth Make Rds , Propellor Shaft U J Cross Make Rds , Radiatorhose Pipe L Type Make Rider , Radiator Cap Make R.P.W , Radiator Fan Make Inter National , Radiator Foundation Lower Make Rider , Radiator Foundation Upper Make Rider , Radiator Hose Clip Make Wikman , Radiator Hose Pipe Damroo Type Make Rider , Radiator Hose Pipe Kit Make Rider , Radiator Hose Pipe S Type Make Rider , Radiator Tan Long Make Rider , Radiator Thermostat Valve Make R.P.W , Radiator Thermostat Water Body Make Olma , Side Door Glass Make Atul , Side Door Glass Rubber Channel Make Alp , Silencer Band Pipe Make Gmi , Silencer Clipbigkothi Make Gmi , Silencer Clip Make Gmi , Silencer Haaki Pipe Make Gmi , Silencer Kothi Make Gmi , Silencer L Type Pipe Make Gmi , Silencer Manifold Make Gmi , Silencer Manifold Nut Bolt Make Tvs , Silencer Manifold Packing Make Banco , Silencer Manifold Pipe Make Gmi , Silencer Patti Make Gmi , Silencer Pipe Straight Make Gmi , Silencer S Pipe Make Gmi , Silincer Clip Fitting Nut Bolt Make Tvs , Spendal Nut Make Tvs , Spendle Quarterpin Make Rane , Steering Bearing Make Skf , Steering Bolt Make Tvs , Steering Cross Assembly Make Rds , Steering Nut Bolt Big Make Tvs , Steering O Ring Make Rider , Steering Packing Make Banco , Steering Push Rod End Make Chhener , Steering Push Rod Kit Make Rane , Steering Push Rod Make Airo , Steering Rod Group Type Make Indosuri , Steering Sector Shaft Make Indosuri , Steering Verm Rod Make Indosuri , Stering Cross Nut Bolt Make Tvs , Third Arm Bolt & Nut Make Tvs , Third Arm Make Telco , Tie Rod Assy Make Rds , Tie Rod End Kit Make Chhener , Tie Rod End Make Chhener , Wheel Hub With Drum Rear Make Franko , Wheel Alignment , Wheel Bearing 32307 Make Skf , Wheel Bearing Front 33111 Make Skf , Wheel Bolt Front Make Tvs , Wheel Bolt Rear Make Tvs , Wheel Cap Make Olma , Wheel Check Nut Make Gs , Wheel Cylinder Assy. Front Make Tvs , Wheel Cylinder Assy. Rear Tvs Make Tvs , Wheel Cylinder Bolt 10 No. Make Tvs , Wheel Cylinder Woisher Kit Front Make Tvs , Wheel Cylinder Woisher Kit Rear Make Tvs , Wheel Disk7.00X19 Make Havey Duty , Wheel Disk7.50 X 16 Make Havey Duty , Wheel Disk Plate 7.50X16 ( 8 Mm. ) Make Havey Duty , Wheel Disk Plate 700X 19 ( 10 Mm ) Make Havey Duty , Wheel Lock Woisher Make R.P.W , Wheel Makkhi Woisher Make R.P.W , Wheel Nut Front Make Tvs , Wheel Nut Rear Make Tvs , Wheel Oil Seal Front Make Rider , Wheel Oil Seal Kada Make R.P.W , Wheel Oil Seal Rear Inner Make Rider , Wheel Oil Seal Rear Outer Make Rider , Engine Head Guide, Headseat Opening Fitting And Griding , Engine Liner Fitting, Block Honing ( Boring ) , Rocker Bush, Connecting Bush, Cam Bush Fitting , Engine Crank Grinding, Polish , 709 1.5 Length Nut Bolt 4Soot Thick , 709 1St Gear Lever , 709 2 Width 12Mm Thick 20 Ft. Long Patta , 709 3Rd Top Fark , 709 3Rd Top Gear Liver , 709 6 Length Nut Bolt 4Soot Thick , 709 A.C. Head Repairing , 709 Accelerator Wire , 709 Axle Me Dye Ghumana ( Thread Banana ) , 709 Bearing 30205 , 709 Bearing 30306 , 709 Bearing 32305 , 709 Bearing 32306 , 709 Benjo Bolt Ke Woisher , 709 Bolt 2.5 , 709 Brake Liner Fitting , 709 Brake Paddle Spring , 709 Brake Paddle Spring , 709 Cabin Rear Glass , 709 Cabin Rear Glass Fitting , 709 Center Bolt 5 4 Soot , 709 Chassis Thiya , 709 Clip Of Oil Jhonga Pipe , 709 Clutc Plate Dhaagewali , 709 Clutc Plate Dhaagewali , 709 Clutch Fark Bolt ( Ghundiwala ) , 709 Clutch Plate ( Dhhagewali ) Gb30 , 709 Clutch Plate ( Dhhagewali ) Gb30 , 709 Clutch Plate Facing , 709 Clutch Plate Facing Fitting , 709 Control Valve O Ring Kit , 709 Control Valve Spool Rod , 709 Counter Opening Fitting , 709 Crank Gear , 709 Dhadi Repairing , 709 Diesel Pipe 19 No Benjo , 709 Diesel Pipe Filter To Pump , 709 Diesel Tank Nut , 709 Diesel Tank Nut Fitting , 709 Differential Oil Drain Cock , 709 Door Outer Handle , 709 Door Outer Handle , 709 Drum Cut Polish , 709 Engine Ac Block , 709 Engine Opening Fitting , 709 Engine Starter Relay , 709 Ex2 Air Filter , 709 Ex2 Diesel Filter , 709 Fark 1St & 2Nd , 709 Fark 1St & 2Nd , 709 Fark Rod , 709 Feed Pump Assy. Packing , 709 Fevibond Tube , 709 Flywheel Bolt Removing , 709 Flywheel Cut Polish , 709 Flywheel Facing , 709 Flywheel Top Drilling , 709 Front Main Glass Opening Fitting , 709 Full Engine Servicing , 709 Gear Changer Lever Gb30 , 709 Gear Chilam Packing , 709 Gear Danda Kit , 709 Gear Danda Lattu , 709 Gear Danda Patti , 709 Gear Lever Bansuri , 709 Gear Opening Fitting , 709 Gear Tapa Lever , 709 Gear Tapa Repairing , 709 Gear Tapa Rod , 709 Group Making In Axle , 709 Group Making Of Hub , 709 Hanger Bolt Woisher , 709 Hub Bearing Lock No. 12 , 709 Injector Nozzle Servicing , 709 Injector Pump Body , 709 Injector Pump Nozzle Repairing , 709 Injector Pump Servicing , 709 Inner Door Lock ( Lhs ) , 709 Kit Fitting In Master Cylinder , 709 Kit Fitting In Master Cylinder , 709 Kit Fitting In Survery , 709 Lift Hydraulic Pump , 709 Liner Cutting , 709 Liner Fitting , 709 Manifold Nut 5 No.17 , 709 Master Cylinder Repairing , 709 Oil Filter , 709 Oil Filter , 709 Oil Pipe ( Big ) , 709 Pilot Bearing Lock , 709 Pinion Lock Ka Gala , 709 Pressure Plate Cut Polish , 709 Pressure Plate Facing , 709 Pto Gear Lever Thread Making , 709 Pto Shaft , 709 Quarter Patti , 709 Rear Teeth Opening Fitting , 709 Rear Teeth Opening Fitting , 709 Reverse Special Fark , 709 Reverse Special Fark , 709 Rocker Rod Lock , 709 Rubber Coupling Of Pto , 709 Self Stud Nut , 709 Sheem , 709 Silencer Clip Nut Bolt Ke Woisher , 709 Slu , 709 Spring Woisher 10 No. , 709 Spring Woisher 12 No. , 709 Spring Woisher 17 No. , 709 Spring Woisher 19 No. , 709 Spring Woisher 22 No. , 709 Spring Woisher 24 No. , 709 Steering Bush , 709 Steering Rod , 709 Supporter Bolt , 709 Survey Repairing , 709 Tapid Push Rod , 709 Timer Gear Opening Fitting , 709 Uj Corss , 709 Water Pump Assy. , 709 Water Pump Packing , 9. Tata 407407 Brake Paddle Gutke , 407 Clutch Paddle Gutke , 407 Cut In Main Shaft , 407 Diesel Pipe , 407 Engaging Gear Fitting , 407 Filling In Gear Tapa , 407 Flywheel Facing , 407 Fog Lever , 407 Gear Danda , 407 Gear Foundation Thhiya , 407 Gear Gande Ki Pin , 407 Gear Tapa Repairing , 407 Half Yog , 407 Half Yog Opening Fitting , 407 Hydraulic Pump Belt , 407 Kit Fitting In Master Cylinder , 407 Liner Opening Fitting , 407 Main Shaft Bearing , 407 Main Shaft Gear Opening Fitting , 407 Main Shaft Lock , 407 Main Shaft Nut , 407 Rc Cable ( Rhs ) , 407 Rc Handle Taan ( Rhs ) , 407 Servo Me Kit Dalana , 407 Servo Tee Valve , 407 Shaft Nut Bolt 12 No. 1.5 , 407 Side Door Inner Handle ( Rhs ) , 407 Side Door Outer Handle ( Rhs ) , 407 Side Thessi ( Rhs ) With Nut Screw 13 No. , 407 Top Shaft Bearing , 407 Water Pump , Air Cleaner Clip Make Hevay Duty , Air Cleaner Hose Pipe Big Make Rider , Air Cleaner Hose Pipe Make Rider , Air Cleaner Make Olma , Air Cleaner Ring Make Rider , Air Compressure Head Packing Make Banco , Axel Bolt Make Tvs , Axel Kangni Make R.P.W , Axel Packing Make Banco , Axel Plate Make R.P.W , Axle Group Wala ( Dogla Axle ) Make Eye , Axle Stud Std & Nut Make Tvs , Benjo Bolt Make Mico , Bharti Voisher Make Hevay Duty , Brake Alter Rachit Make Rane , Brake Booster Assy. Make Tvs , Brake Booster Kit 45 / 1 Make Tvs , Brake Booster Rubber Make Tvs , Brake Booster Tee Make Tvs , Brake Bottle Make R.P.W , Brake Liner Front With Rivit Make Tvs , Brake Liner Rear With Rivit Make Tvs , Brake Pipe Front Steel Make Randeep , Brake Pipe Rear Steel Make Randeep , Brake Thali Bolt Make Tvs , Break Dibbi Make R.P.W , Break Liner Kit Make Tvs , Break Master Cylinder Assy Make Tvs , Break Master Cylinder Assy. ( Double Cylinder ) Make Tvs , Break Master Cylinder Kit Major Make Tvs , Break Master Cylinder Kit Minor Make Tvs , Break Master Cylinder Pipe No.10 Make Randeep , Break Pipe T ( Of Master Cylinder ) Make R.P.W , Cabin Foundation Make Rider , Cabin Foundation Nut Bolt Make Telco , Chasis Cross Member Center Bearing Wala Make Telco , Chasis Cross Member Engine Wala Make Telco , Chasis Cross Member Gear Wala Make Telco , Chasis Cross Member Nut Bolt Make Tvs , Clutch Cylinder Assy. Lower Make Tvs , Clutch Cylinder Assy. Upper Make Tvs , Clutch Cylinder Bottle Make R.P.W , Clutch Cylinder Kit Lower Major Make Tvs , Clutch Cylinder Kit Upper Major Make Tvs , Clutch Fark Lever Cone Make R.P.W , Clutch Figure Kit Make Ca , Clutch Fork Lever Make R.P.W , Clutch Fork Lever Patti Make R.P.W , Clutch Hub Make Delta , Clutch Plate Kafacing Make Ca , Clutch Plate New Make Ca , Clutch Release Bearing Make Skf , Clutch Taan Make R.P.W , Defentional Crown Pinion Make Gajra0 , Defentional Crown Pinion Nut Make Tvs , Defentional Crown Pinion Oil Seal Make Rider , Defentional Crown Spider Kit Make Gajara , Defentional Crown Star Woisher Make Airo , Defentional Crown Thrust Woisher Standard Make Airo , Defentional Packing Make Banco , Diesel Benjo Pipe Make Randeep , Diesel Connection Overflow Pipe Make Randeep , Diesel Connection Pipe Double Banjo Make Randeep , Diesel Filter Bowel Make Mico , Diesel Filter Plate Make Mico , Diesel Filter Thhiya Make R.P.W , Diesel Filter Thhiya Nut Bolt Make Tvs , Diesel Pipe L Type & Z Type Make Randeep , Diesel Tank Bracket Make Telco , Diesel Tank Cock Nut Jali Wala Make R.P.W , Diesel Tank Patti Make Hevay Duty , Diesel Tanki Complete Make Telco , Disk Repairing 7.50X16 Make Genuine , Door Glass Machine Make Ci , Door Lock And Handle Make Ci , Engine A.C. Piece Make Kirloskar , Engine A.C. Ring Make Goetze , Engine Begin Bearing Make Kirloskar , Engine Block Make Telco , Engine Cam Shaft Make Telco , Engine Connecting Bush Make Kirloskar , Engine Connecting Rod Bolt Make Tvs , Engine Connecting Rod Make Telco , Engine Cranck Shaft Make Bharat , Engine Crank Grinding, Polish , Engine Crank Make Telco , Engine Foundation Bolt Make Tvs , Engine Foundation Left Make Rider , Engine Foundation Right Make Rider , Engine Foundation Thhiye Make R.P.W , Engine Headgaskit Half Make Banko , Engine Head Compressure Pipe Make Randeep , Engine Head Gaskit Full Make Banko , Engine Head Guide, Headseat Opening Fitting And Griding Facing , Engine Head Make Telco , Engine Head Valve Catcher Make R.P.W , Engine Head Valve Guide Make Evl , Engine Head Valve Make Evl , Engine Head Valve Seal Make Goetze , Engine Head Valve Seat Make Evl , Engine Head Woisher Make R.P.W , Engine Kem Bush Make Mpr , Engine Kem Tikli Make Airo , Engine Liner Lock Make Airo , Engine Liner Slu Make Tiger Power , Engine Main Bearing Make Kirloskar , Engine Main Oil Seal Make Pioneer , Engine Oil Chamber Make Telco , Engine Oil Filter Make Mico , Engine Oil Gauge Inner & Outer Make R.P.W , Engine Oil Pipe Make Randeep , Engine Oil Pressure Pipe Make Randeep , Engine Oil Pump Gear Set Make Tata , Engine Oil Pump Valve Make Tata , Engine Oil Zhonga Ring Make Rider , Engine Oil Zonga Make Olma , Engine Oil Zonga Pipe Make Rider , Engine Over Flow Voisher Make Olma , Engine Piston Pin Make Goetze , Engine Piston Ring Make Goetze , Engine Piston Set Make Goetze , Engine Rocker Bush Make Kirloskar , Engine Rocker Shaft Make Telco , Engine Tapit Cover Complete Make Telco , Engine Tapit Cover Packing Make Banco , Engine Tapit Cover Pipe Lohe Wala Make Olma , Engine Tapit Screw Make Tvs , Engine Thrust Voisher Make Mpr , Engine Timer Gear Make Telco , Engine Timer Kit Make Telco , Engine Timing Cover Packing Make Banco , Engine Timing Oil Seal Kada Make Kross , Engine Timing Oil Seal Make Pioneer , Engine Timing Plate Packing Make Banco , Engine Water Pump Major Kit Make Indosuri , Engine Water Pump Packing Make Banco , Engineoil Chamber Packing Make Banco , Fan Belt1338 Make Fanner , Fly Whell Assy Make Telco , Front Glass Rubber Channel Make Alp , Front Wind Sheld Glass Make Atul , Fry Wheel Bolt Make Tvs , Fry Wheel Patti Make R.P.W , Frywheel Ring Make Gajra , Gear 2Nd Make Gajra , Gear 2Nd Slu Make Gajra , Gear 3Rd Make Gajra , Gear 3Rd Top Main Slu Make Gajra , Gear 4Thring Make Gajra , Gear 4Th & Top Wheel Ring Make Gajra , Gear 4Th Make Gajra , Gear 4Th Slu Make Gajra , Gear Box Chilam Make Rds , Gear Box Foundation Cover Make R.P.W , Gear Box Packing Make Banco , Gear Butter Ring Make Olma , Gear Changer Kangani Make Gajra , Gear Charra Spring Make Olma , Gear Chilam Oil Seal Make Rider , Gear Counter Gear Big Double Make Gajra , Gear Counter Shaft Make Gajra , Gear Dande Ka Lattoo Make Olma , Gear Dande Ki Katori Make Olma , Gear Dande Ki Spring Make Olma , Gear Dog Kit Make Tvs , Gear Double Small Make Gajra , Gear Engaging Make Gajra , Gear First Kangni Lohe Ki Make Gajra , Gear First Make Gajra , Gear First Ring Make Gajra , Gear Flanch Make Rds , Gear Foundation Make Rider , Gear Handi Pto Wali Make Gajra , Gear Kangan Bearing Double Jali Make Skf , Gear Kangan Bearing Make Skf , Gear Kangni 1St & 2Nd Make Gajra , Gear Kangni Special Make Gajra , Gear Kangni Third & Fourth Make Gajra , Gear Lever End Big Make Rane , Gear Lever End Small Make Rane , Gear Main Shaft Make Gajra , Gear Main Shaft Shim Make R.P.W , Gear Main Shaft Voisher Make R.P.W , Gear Oil Seal Make Rider , Gear Pilot Bearing Make Skf , Gear Plate Alluminium Complete Make Telco , Gear Plate Milometer Make Telco , Gear Reverse Bearing Make Skf , Gear Reverse Idoler Make Gajra , Gear Reverse Make Gajra , Gear Reverse Pin Make Gajra , Gear Reverse Woisher Make R.P.W , Gear Synchronising Ring Make Gajra , Gear Tapa Kit Lpt Make R.P.W , Gear Top Gear Plate Make Gajra , Gear Top Ring Make Gajra , Gear Top Shaft Make Gajra , Gear Top Shaft Nut Make Rane , Injector Fuel Pump Assy. Make Mico , Injector Glassy Complete Make Mico , Injector Nozzle Over All Kit Make Mico , Injector Nozzle Pipe Make Mico , Injector Nozzle Voisher Make Mico , Injector Packing Make Banco , Injector Pump Over All Kit Make Mico , Kamani Bush Front Make Gs , Kamani Bush Rear Make Gs , Kamani Helper Thhiye Make Gs , Kamani Jhula Front Make Gs , Kamani Jhula Rear Make Gs , Kamani Katar Bolt Make Gs , Kamani Patta 3 No. Front Make Gs , Kamani Patta 3 No. Rear Make Gs , Kamani Patta 4 No. Front Make Gs , Kamani Patta 4 No. Rear Make Gs , Kamani Patta 5 No. Front Make Gs , Kamani Patta 5 No. Rear Make Gs , Kamani Patta 6 No. Clipwala Front Make Gs , Kamani Patta 6 No. Clipwala Rear Make Gs , Kamani Patta 7 No. Front Make Gs , Kamani Patta 7 No. Rear Make Gs , Kamani Patta 8 No. Front Make Gs , Kamani Patta 8 No. Rear Make Gs , Kamani Patta A No. Front Make Gs , Kamani Patta A No. Helper Make Gs , Kamani Patta A No. Rear Make Gs , Kamani Patta B No. Front Make Gs , Kamani Patta B No. Helper Make Gs , Kamani Patta B No. Rear Make Gs , Kamani Patta Mada Front Make Gs , Kamani Patta Mada Rear Make Gs , Kamani Patta Main Front Make Gs , Kamani Patta Main Helper Make Gs , Kamani Patta Main Rear Make Gs , Kamani Pin Front Make Gs , Kamani Pin Rear Make Gs , Kamani Shim Thin Make Gs , Kamani Thhiya Front Make Gs , Kamani Thiya Rear Make Gs , Kamani U Clamp Bracket Make Gs , Kamani Woisher Thick Make Gs , King Pin Katter Pin Make Tvs , King Pin Set ( Including Pin Bush Bearing ) Make Srmt , King Pin Spendal Nut Make Tvs , Liner Fitting, Block Honing, Rocker Bush, Connecting Bush, Cam Bush Fitting, Cam Grinding , Milometer Chain Make Pricol , Milometer Rod Make R.P.W , Pressure Plate Assembly Finger Wali Make Ca , Pressure Plate Assy. Sunflower Make Ca , Pressure Plate Bolt Make Tvs , Pressure Plate Tawa Make Ca , Propellor Shaft Cross Holder Make Rds , Propellor Shaft Full Yog Make Rds , Propellor Shaft Nut Bolt Make Tvs , Propellor Shaft U J Cross Make Rds , Propullar Shaft Center Bearing Bracket Nut Bolt Make Tvs , Propuller Shaft Cent Bearing Complete Make Skf , Propuller Shaft Cent Bearing Rubber Make Rider , Propuller Shaft Center Bearing Bracket Make R.P.W , Propuller Shaft Center Bearing Cone Make R.P.W , Propuller Shaft Center Bearing Flanch Make Rds , Propuller Shaft Center Bearing Teeth Make Rds , Push Rod Repairing Kit Make Chhener , Radiator Cap Make R.P.W , Radiator Fan Make Inter National , Radiator Foundation Lower Make Rider , Radiator Foundation Upeer Make Rider , Radiator Hose Clip Make Wikman , Radiator Hose Pipe Damroo Wala Make Rider , Radiator Hose Pipe Kit Make Rider , Radiator Hose Pipe L Type Make Rider , Radiator Hose Pipe S Type Make Rider , Radiator Tan Long Make Rider , Radiator Thermostat Valve Make R.P.W , Radiator Thermostat Water Body Make R.P.W , Side Door Glass Make Atul , Side Door Glass Rubber Channel Make Alp , Silencer Bend Pipe Make Gmi , Silencer Clipkothi Big Make Gmi , Silencer Clip Make Gmi , Silencer Haaki Pipe Make Gmi , Silencer Kothi Make Gmi , Silencer L Type Pipe Make Gmi , Silencer Manifold Make Telco , Silencer Manifold Nut Bolt Make Tvs , Silencer Manifold Packing Make Banco , Silencer Manifold Pipe Make Gmi , Silencer Patti Make Gmi , Silencer Pipe Straight Make Gmi , Silencer S Pipe Make Gmi , Silincer Fitting Nut Bolt Make Tvs , Steering Bearing Make Skf , Steering Bolt Make Tvs , Steering Cross Assembly Make Rds , Steering Nut Bolt Big Make Tvs , Steering O Ring Make Rider , Steering Packing Make Banco , Steering Push Rod End Make Chhener , Steering Push Rod Make R.P.W , Steering Rod Groupwali Make R.P.W , Steering Sector Shaft Make Gajara , Steering Verm Rod Make Rds , Third Arm Bolt & Nut Make Tvs , Third Arm Bolt 6 Inch Make Tvs , Tie Rod End Kit Make Rane , Tie Rod End Make Rane , Wheel Alignment , Wheel Bearing Front Big Make Skf , Wheel Bearing Front Small Make Skf , Wheel Bearing Rear Big Make Skf , Wheel Bearing Rear Small Make Skf , Wheel Bolt Front With Nut Make Tvs , Wheel Bolt Rear With Nut Make Tvs , Wheel Cap Make Olma , Wheel Check Nut Make Gs , Wheel Cylinder Assy. Front Make Tvs , Wheel Cylinder Assy. Rear Make Tvs , Wheel Cylinder Bolt 10 No. Make Tvs , Wheel Cylinder Woisher Kit Front Make Tvs , Wheel Cylinder Woisher Kit Rear Make Tvs , Wheel Lock Woisher Make Tvs , Wheel Makkhi Woisher Make Tvs , Wheel Nut Front Make Tvs , Wheel Nut Rear Make Tvs , Wheel Oil Seal Front Make Rider , Wheel Oil Seal Kada Make R.P.W , Wheel Oil Seal Rear Inner Make Rider , Wheel Oil Seal Rear Outer Make Rider , 10. Tractor Parts ( Sonalica, Eicher, New Holland, Swaraj Mazada, Farmtrac ) Assy Engine Comp. W / Clutch , Assy Half Block , Assy Long Block , Gasket Kit ( Engine Overhaul ) , Decarbonising Gasket Kit , Assy Cyl Crankcase Without Cl Hsg:E Iii With 77 Dia Air Compressor For Rope Seal , Cylinder Liner , Screw Plug , Sealing Washer 18X22 Is3175 Cu , Sealing Plug , Sleeve Cyl Block , Clamping Sleeve Cyl Block , Cyl. Pin 12 H 8X30 , Locking Cover , Sealing Plug Am 16X1.5 ( Oil Gallery ) , Sealing Washer 16X22 , Cyl. Pin ( Cyl Head To Cyl Block ) , Cyl Pin 8 M 6X16 , Bolt For Main Bearing Cap , Locating Pin , Assy Tube Dipsitck W / O Nut & Ferrule , Assy Oil Dipstick Complete , Assy Timing Gear Hsg With Bottom Cover , Cyl Pin 8 M 6X16 , Gasket ( Timing Gear Housing ) , Locking Plate , Hex Screw M 10X25 , Assy Tgh Cover With Helicoil , Stud Bm 8X20 , Oil Seal-Crankshaft Front , Tgh Cover Gasket , Integral Shaft Bearing ( Mech Feed Pump ) , Cam ( Mech Feed Pump ) , Stud ( Cm6x16 ) , Spider- ( Mech Feed Pump ) , Assy Breather , Hose ( Breather ) , Hose Clip 25 , Assy Cover Push Rod Chamber , Gasket-Pushrod Chamber Cover , Assy.Oilsump W / O Dipstick Flanges , Sealing Washer 18X22 Is3175 Cu , Assy Magnetic Drain Plug , Retaining Flange On Oil Sump , Spring Washer B 6 , Hex Screw M 6X12 , Gasket ( Bracket To Oil Sump ) Bsiv , Flange Oil Sump Dipstick , Hex Screw M 8X22 , Spring Washer B8 Is3063 Ss8451-8C , Double Socket , Set Oil Sump Gaskets , Oil Pan Damper , Oil Pan Damper-Small , Prc Baffle Cover , Assy Combi Screw , Engine Speed Sensor , Assy Cyl.Hd.W.Vales ( 60Deg Inlet ) :4Spbs3 , Assy Cylinder Head W / O Valves , Plug Mc 30X1.5 , Seat Plug ( On Cyl Head ) , Core Plug 20 Dia , Set Of Valve Seat Ring E-Iii Std , Consists Of: , Valve Seat Ring Inlet Bs-Iii Normal , Valve Seat Ring-Exhaust ( Cng ) -Normal , Valve Guide Inlet Std 15.00 Mm Dia , Valve Guide-Exhaust ( Std ) , Valve Guide Seal-Inlet , Valve Guide Seal-Exhaust , Valve Spring ( Inner ) , Valve Spring ( Outer ) , Valve Spring Washer , Lock Retainer Valve Spring , Valve Spring Lock Half , Inlet Valve ( 60 Deg ) -Rane Evl , Valve-Exhaust ( Euro-Iii ) -Evl , Cylinder Head Gasket-1.35 Thick , Assy Cylinder Head Cover ( Alluminium Side ) , Cap ( For Cyl Head Cover ) , Gasket , Gasket ( Intake Mani.Cum Head Cover ) -Ssl , Hex Flange Bolt ( M 8X 122 L ) , Hex Collar Bolt , Air Inlet Elbow , Gasket With Beading ( Air Intake Elbow ) , Boost Pressure / Temp Sensor , Assy Crankshaft ( Int ) With Pin:Normal , Ball Bearing , Locking Ring Crankshaft , Crank Shaft Gear , Key 8X13 , Oil Slwinger , Spacer ( Suitable For Oil Slwinger ) , Assy Pulley With Cover ( 2 Groove ) , Thrust Spacer , Vibration Damper Lock , Kit-Sealing Ring C / Shaft W / Loc.Pins , Consists Of: , Sealing Ring Half , Locating Pin , Flywheel , Assy Flywheel With Ring Gear: Bs-Iii , Ring Gear , Locking Plate , Hex Head Bolt , Connecting Rod , Assy Connecting Rod Without Brg Shells , Assy Con Rod Wbush & Bolt :Fs:Normal , Consists Of: , Connecting Rod , Connecting Rod Bush Normal , Connecting Rod Bolt , Con.Rod Cap , Bush Set Connecting Rod Std , Consists Of: , Connecting Rod Bush Std , Connecting Rod Bolt ( Fully Threaded ) , Connecting Rod Bearing Set , Connecting Rod Bearing Set Std , Consists Of: , Connecting Rod Bearing Half Std , Connecting Rod Bearing Set R / S I , Consists Of: , Connecting Rod Bearing Half R / S I , Connecting Rod Bearing Set R / S Ii , Consists Of: , Connecting Rod Bearing Half R / S Ii , Set-Bearing, Connecting Rod , Consists Of: , Connecting Rod Bearing Half R / S Iii , Connecting Rod Bearing Set R / S Iv , Consists Of: , Connecting Rod Bearing Half R / S Iv , Main Bearing And Thrust Washer Set , Set Main Bearing Upper / Lower Std Consists Of: , Main Bearing Half Upper Std , Main Bearing Half Lower Std , Set-Main Bearing, Upper / Lower, Repair Size -I Consists Of: , Main Bearing Half Upper Repair Size -I , Main Bearing Half Lower Repair Size -I , Set-Main Bearing, Upper / Lower, Repair Size -Ii Consists Of: , Main Bearing Half Upper Repair Size - Ii , Main Bearing Half Lower Repair Size -Ii , Set-Main Bearing, Upper / Lower, Repair Size -Iii Consists Of: , Main Bearing Half Upper Repair Size -Iii , Main Bearing Half Lower Repair Size -Iii , Set-Main Bearing, Upper / Lower, Repair Size -Iv Consists Of: , Main Bearing Half Upper Repair Size -Iv , Main Bearing Half Lower Repair Size -Iv , Consists Of: , Main Bearing Half Upper Std , Main Bearing Half Lower Std , Set Of Thrust Washer Std , Consists Of: , Thrust Washer Lower Half Std , Thrust Washer Upper Half Std , Set Of Thrust Washer R / S I , Consists Of: , Thrust Washer Lower Half R / S I , Thrust Washer Upper Half R / S I , Set Of Thrust Washer R / S Ii , Consists Of: , Thrust Washer Lower Half R / S Ii , Thrust Washer Upper Half R / S Ii , Piston And Piston Ring Set , Set : Bare Piston ( Goe India ) :497 Bsiii , Piston Set 497 Bs-Iii Std , Piston , Pin , Circlip , Set : Piston Ring :497Bsiii / 4Sp Bs Iii , Plasma Filled Keystone Ring-I , Inter Stepped Compression Ring , Assy Oil Control Ring Groove Iii , Piston Ring Set 497 Bs-Iii Std , Plasma Filled Keystone Ring-I , Inter Stepped Compression Ring , Assy Oil Control Ring Groo , Assy Camshaft W Cyl Pin:Normal , Cylinder Pin ( Cam Shaft ) , Cam Shaft Gear , Bolt ( Cam Shaft Gear Mtg ) , Thrust Washer , Hex Screw , Drive Gear ( Fip ) , Butting Ring , Parallel Key , Valve Tappet Inlet & Exhaust Std , Valve Push Rod Inlet & Exhaust , Assy Rocker Arm Left With Bush , Assy Rocker Arm Right With Bush , Bush , Ball End Tappet Adjuster , Hex Nut ( Ball Pin -Rocker Arm ) , Spring Long , Assy Rocker Arm Shaft With Arms Complete , Assy Rocker Arm Shaft , Sealing Cap 14 , Connecting Nipple Inside , Spring Connecting Nipple , Connecting Nipple Outside , Rocker Arm Support No. 1 , Rocker Arm Support No. 3 & 4 , Bolt ( Rocker Arm ) , Grub Screw Em6x10 , Spring Short , Spring Clip , Set Of Camshaft Bearing Std , Consist Of : , Camshaft Bearing No. 1 , Assy Fip Rotary 497 Bsiii , Fip Support Plate , Inj.Pump Gear ( Mech.Feed Pump ) , Gasket ( Fip To Support ) , Gasket ( Support Injection Pump ) , Rubber Tube ( 140 ) , Hose ( Reducer For Leak Off ) L350 Mm , Clamp ( Injector Overflow Tube ) , Assy Bracket ( Fip Mtg.On Cyl.Crankcase ) , Fuel Pressure Lines ( Euro Iii ) , Set:Assy Fuel Pr.Line:Bsiii-Fltg Filter , Assy Injector ( Nbfe Type ) , Connector One Tube , Assy Injector Normal , Connector Two Tubes , Injector Claw , Hex Fl. Bolt-M8x33.5 , Sph Washer 8.4 , Assy Fuel-Water Separator , Fuel - Water Seperator Spin On , Catridge - Fuel Water Seperator - Spinon , Water In Fuel Sensor , Bracket ( Fuel Filter Mtg ) , Assy Fuel Line ( F.Pump To Filter ) , Clamp , Bracket , Assy Fuel Line ( Filter To Fip ) , Pipe Union Bolt 8 M12x1.5 , Sealing Washer 12X15.5 , Assy Overflow Line , Support Bracket ( Over Flow Line ) , Clamp , Sealing Washer 14X18 Is3175 Al , Pipe Union Bolt 10 M14x1.5 Ts16405 , Assy Feed Pump ( Mechanical ) , Gasket ( Mechfeed Pump ) , Hose ( Reducer For Leak Off ) L350 Mm , Assy Connecting Rod ( W / O Brgs ) , Guide Screw , Hex Nut , Bush ( Connecting Rod ) , Cylinder Sleeve. , Gasket, Cylinder Sleeve To Cyl. Block , Assy Cylinder Head , Gasket ( For 77 Dia.A.C.Head To Cylsleeve ) , Air Compressor Cyl Head Gas / Kit , Hex Head -Coller Bolt , Lock Nut M22x1.5 Ts17408 Ss8451-8C , Screw M 8X30 , Spring Washer B 8 , Assy Piston With Rings , Set Piston Ring Std 77D , Set, A / C Con Rod Bearing , Consisting Of : , Bearing Half, Upper , Bearing Half, Lower , Assy Pipe , Rubber Hose , Hose Clamp ( 23 Dia ) , Elbow K15 M 22X1.5 , Bracket , Hex Screw M12x25 Is1364p2-8.8-Ss8451-8C , Assy Turbocharger M / S Turboenergy , Assy Turbocharger M / S Holset , Assy Turbocharger ( Honeywell ) , Intermediate Pipe ( Turbocharger To Exh. Pipe ) , Exhaust Manifold , Gasket Exhaust Manifold , Gasket ( Exh Manifold To Turbo Charger ) , Stud Bm 8X25 ( Manifold To Turbocharger ) , Self Locking Nut , Stud Bm 8X35 ( Tc To Intermediate Pipe ) , Self Locking Nut , Heat Shield ( For Exhaust Manifold ) , Gasket ( Turbocharger To Intermediate Pipe ) , Assy Heat Shield ( For Starter Motor ) , Assy Bracket ( Tc Intermediate Pipe ) , Assy Flange ( Tc Outlet To Oil Sump ) , Gasket ( Tc Outlet ) , Gasket Turbocharger Outlet , Rubber Hose ( Tc To Cyl.Block ) , Repair Kit For Turbo Charger , Consists Of : , Journal Bearing , Thrust Bearing , Split Seal Ring , Split Seal Ring ( Compressor ) , O Ring ( Bearing Housing ) , O Ring ( Compressor ) , Lock Nut ( Compressor Wheel ) , Retaining Ring , Assy Adaptor With Pipe ( Tel Tc ) , Vee Band Clamp , Hose Clamp Tb 64 , Hose ( Int Cooler To Pipe ) , Assy Pipe ( Tc To Ic ) , Support ( For Pipe Tc To Ic ) , Hump Hose , Assy Intercooler ( Vave ) , Intercooler:Lpt709 Bsiiex:M / S Tata Toyo , Assy Intercooler ( Vave ) :M / S Alkraft , Assy Pipe ( Ic To Air Intake Elbow ) :Lpt , P Type Clamp , Support ( For Fill Pipe & Ic Pipe ) , Assy Support ( On Bridge ) Ic To Elbow , Starter Motor 12V , Spacer , Earth Strap , Alternator 14V, 65 Amps, 2 Groove Pulley ( Mico ) , Alternator 2Sa28 12 65A ( Ltvs ) , Bracket ( Alternator Mounting ) , Assy Clamp Rod Complete , Clamping Piece , Clamping Nut , Bolt For Fixing Alternator , Spring Alternator , Locking Plate , V Belt Cogged 1280 Long , Ecu, Ems Vp37 For Diesel Engine Euro-Iii , Assy Ecu Mounting Bracket , Oil Pump , Assy Oil Pump Without Strainer , Oil Pump Housing , Assy Strainer Oil Pump , Assy Strainer , Shaft Driven Gear , Oil Pump Gear ( Driven ) , Drive Shaft Oil Pump , Oil Pump Gear Driveshat , Woodruff Key 3X6.5 , Drive Gear Oil Pump , Valve Housing Oil Pr Relief Valve , Spring Pressure Relief Valve , Plunger ( For Oil Pressure Relief Valve ) , Plug Relief Valve -Oil Pump , Gasket , Kit, Oil Pump Gear , Consists Of : , Gear ( Driven ) , Gear ( Drive Shaft ) , Oil Filter , Assy Oil Filter Complete ( Spinon ) , Lube Oil Filter-Spin On , Assy Oil Filter , Gasket ( Oil Filter To Cyl Block ) , Assy Oil Cooler , Gasket ( Cover On Oil Cooler ) , Gasket Washer ( Oil Cooler Cover ) , Sealing Washer 22X27 , Pressure Spring Pr Relief Valve , Screw Plug , Sealing Washer A 8X12 , Hex Screw M 8X20 , Gasket ( Assy Cooler On Cyl Block ) , Hex Fl Bolt M8x40 , Tc Oil Supply Line Assy , Pipe Union Bolt 10 M14x1.5 Ts16405 , Hose ( Tc Outlet To Cyl Crankcase ) , Assy Flange ( Tc Outlet To Oil Sump ) , Gasket Turbocharger Outlet , Hose Clamp ( 32 Dia ) , Adaptor Tc Oil Return , Low Oil Pressure Switch , Assy Piston Cooling Nozzle With Dowel Pin , Assy Relief Valve , Assy Water Pump , Housing, Water Pump , Cover , Back Cover , Pulley 3 Groove , Assy Fan , Spacer ( For Fan ) , Lock Plate , V-Belt ( Cogged ) 1280 Mm Length , Assy Thermostat Wjiggle Pins:83 Deg , Rubber Hose ( Thermostat To Radiator ) , Spring Band Clamp 47Dx12w , Rubber Hose ( Thermostat To Water Pump ) , Spring Band Clamp 30Dx12w , Assy Upper Cooling Water Line , Gasket ( Ucw Line ) , Screw M 8X20 , Temp. Transducer , Water Temp Sensor , Rubber Hose ( Cooling Water Line To Thermostat ) , Hose Clamp 50 , Water Pump Repair Kit ( Major ) , Consisting Of : , Sealing Member , Sliding Ring , Axle Slide Ring Seal , Cyclam Slide Ring Seal , Rubber Seal Ring , Taper Roller Bearing , Impeller, Plastic , Shaft , Oil Seal , Gasket Water Pump , Shim Thick , Gasket , Circlip A 28X2 ( Heavy Duty ) , Hub , Water Pump Repair Kit ( Minor ) , Consisting Of : , Sealing Member , Seal Sliding Ring , Oil Seal , Gasket Water Pump , Gasket Water Pump , Gasket Clutch , Circlip A 28X2 , Set:A / F, Pipes & Hoses , Assy Air Cleaner With Mtg.Bkt , Elem.Air Cleaner ( Primary ) , Elem.Air Cleaner ( Safety ) , Elbow Hose , T Bolt Type Hose Clamp-Tb 90 , Hose:Holset Tc , Reducer Elbow Hose , T Bolt Type Hose Clamp-Tb64 , Connector Pipe , Outlet Pipe, Bracket Assy , Assy Air Inlet Duct , Straight Hose , T Bolt Type Hose Clamp-Tb108 , Support , Service Indicator ( Enginetech ) , Adaptor , Nylon Tube 8 Odx6id , Rubber Buffer , Assy Bkt Dipstic Mtg , Clamp For Dipstic Mtg , Assy Bracket ( Bottom ) For Air Inlet Duct , Assy Bracket ( Top ) For Air Inlet Duct , Pulley ( Power Steering ) , Assy Pump Power Strg. ( Chinese ) , Bracket ( Pstrg Pump Mtg ) , V-Belt ( Cogged ) 980 Mm Length , Pulley:Cast ( For Zf Pstg ) , Assy Clamping Rod Complete , Clamping Piece , Clamping Nut , Pivot Pin , Bracket-Steering Pump ( On Cyl.Head ) , Assy Engine Mounting Front ( Lh ) , Assy Engine Mounting Front ( Rh ) , Cover Eng.Mtg.Front / Rh. , Tab Washer , Assy Rubber Support. , Washer , Engine Mountig Arm Right. ( Painted ) , Bracket Assy, Engine Mtg , Lifting Hook ( Rear ) , Set A - Ceekay Daikin , Assy Cover Plate 310 Dia. ( Reinforced ) , Driven Plate Assy 310 Dia. ( Reinforced ) , Set B- M / S Setco , 310 Dia. ( Reinf ) Clutch Cover Assy , 310 Dia. ( Reinf. ) Assy Clutch Disc , Clutch Housing ( 310Dia Cl ) :497Tcic Bs:Iii , Protective Cover ( Cl.Housing Front ) , Clutch Housing Lower Part ( 310Dia Cl ) , Clutch Cover Housing Upper , Pin , Assy Clutch Release Bearing With Sleeve , Clutch Release Bearing , Clutch Release Fork ( Reinforced ) , Ball Pin , Bracket, Inside , Assy Outer Race , Assy Bracket Outside , Rubber Bellow ( Clutch Release Fork ) , Cover ( Clutch Housing Silde ) , Cover ( Inspection Window ) , Gasket ( Inspection Window ) , Cover Diaphragm Sub Assy , Consisting Of : , Cover Plate , Clutch Cover Housing , Fulcrum Plate , Diaphragm Plate , Diaphragm Spring , Diaphragm Rivets , Kit For Strap And Rivets , Consisting Of : , Strap , Rivet ( Pressure Plate ) , Rivet ( Cover ) , Kit For Clutch Disc , Consisting Of : , Clutch Facings ( 310 Dia. ) , Facing Rivet , Assy Gear Box Comp.Gbs40-5 / 8.02W / 6Bcf , Gear Box Housing , Cylindrical Pin 10 H X 20 Is 2393 , Gasket ( Cover Front Lower ) , G.B.Hsg Cover Front Lower , Gasket ( Cover Front Top To Hsg ) , Gearbox Housing Cover ( Front Top-Nup Brg ) , Oil Slwinger ( Gb Hsg. Front Cover ) , Double Lip Oil Seal ( Serrated ) , Butting Ring Thick , Gear Case Cover Rear , Oil Seal ( Main Shaft ) , Assy Threaded Bush , Adapter , Oil Seal , Plug Speedo Drive , Shim Thick , Gasket ( Gear Case Cover Rear To Housing ) , Gear Case Cover Top ( Lower Half ) , Gasket ( Top Cover ) , Cyl Pin 10 H 8 X 20 Is 2393 , Stud , Pin Swing Lever , Pressure Relief Valve , Thrust Pin ( Reverse Indicator Switch ) , Pressure Spring ( Reverse Indicator Switch ) , Reverse Light Switch With Pigtail , Swing Lever Shifter Fork ( 1St Speed ) , Roller 2X13.8 , Washer , Pressure Piece For Check Plate , Pressure Spring For Pressure Piece , Slotted Plug , Interlocking Pin , Pressure Spring For Interlocking Pin , Sealing Plug M 24X1.5 , Assy Check Plate , Stopper Piece Check Plate , Support Piece Check Plate , Slotted Nut M 8 Ts 17412 , Spring Washer , Selector Shaft For First Speed , Selector Shaft ( 2 / 3 ) , Selector Shaft ( For Reverse Gear ) , Gear Shift Dog ( For First Gear ) , Selector Fork ( 2 / 3 ) , Selector Fork ( For 1St Speed Gear ) , Selector Fork ( For Reverse Gear ) , Pressure Spring , Steel Ball 11 Mm Dia. , Clamp ( Selector Shaft To Gear Box Housing ) , Locking Plate ( Selector Shaft To Gear Box Housing ) , Cover Top ( Upper Half ) , Needle Bearing , Shifter Fwinger , Selector & Shifter Shaft , Dowel Sleeve Heavy 10X40 , Oil Seal , Scraper Ring , Shifting Lever , Cap , Bellow , Hose Clip 25 , Gasket ( Between Upper & Lower Half ) , Pivot Pin , Intermediate Lever ( Rev. Gear ) , Sliding Key , Gear Box Gasket Kit Consists Of: , Gasket Front Cover Lower , Gasket Front Cover Upper , Gasket Rear Cover , Gasket Top Cover , Drive Shaft T=15, 497 ( Eng. ) , Compression Spring , Clamping Plate , Cylindrical Roller Bearing , Snap Ring Thick , Spacer On Drive Shaft , Oil Slwinger ( Front Side ) , Lock Nut Lh Thread , Roller Cage ( Longer ) 28X48x30.8 , Circlip ( Layshaft ) , Main Shaft ( Longer Pilot Bearing ) , Four Point Ball Bearing , Pressure Spring , Pin On Main Shaft , Butting Ring Thick , Butting Ring 8.00 Mm Thick , Synchronising Ring 5Th Speed , Synchronising Sleeve 4Th & 5Th , Synchronising Cone , Shifting Sleeve , Assy Helical Gear 4Th Speed , Double Row Needle Cage , Collar Bushing 44.6 Mm Long ( For Third Speed Gear ) , Roller Cage ( Double Row ) , Assy Helical Gear 3Rd Speed , Synchronising Ring 3Rd Speed , Synchronising Sleeve 2 / 3 , Synchronising Cone , Shifting Sleeve , Roller Cage ( Double Row ) , Helical Gear 2Nd Speed , Reverse Gear On Main Shaft , Shifter Sleeve 1St Speed , Collar Bushing 47.9 Mm Long , Gear Wheel 1St Speed , Gear Speedometer Drive W / Oil Slwinger , Shaft ( Speedo Drive ) , Speedo Gear ( Nylon ) , Coupling Flange ( 120 Od ) , Hex. Nut , Counter Shaft , 2Nd Gear ( T17 ) Counter Shaft , 3Rd Speed Gear Counter Shaft , 4Th Gear Counter Shaft , Constant Mesh Gear , Circlip A 52X2.5 Ts 17637 , Taper Roller Bearing , Reverse Idle Gear With Bush , Bush Reverse Idler Gear , Reverse Idler Gear Shaft , Plug Oil Filling , Magnetic Drain Plug , Synchro Kit Gbs 40 Consists Of : , Carrier 4 / 5 & 2 / 3 , Carrier 1St , Retention Pin 4 / 5, 2 / 3 , Retention Pin 1St , Comp. Spring , Assy Bkt.G.S.L.Mtg. ( For Power Stg.Veh ) , Assy Bracket ( For W / O Power Stg.Veh ) , Assy Gear Shift Lever ( With Bushes ) , Sub Assy G.S.Lever ( Upper & Lower Part ) , Sub. Assy Cup , Bush ( G.S.L.Ball Seat ) , Bush ( Shperical Seat G.S.Lever ) , Spacer , Bellow Holder , Retainer Plate , Spring Ring , Rubber Bellow , Spacer Gear Shift Lever , Assy Gearshift Lever Knob , Rubber Seal , Flap ( For Cab Version ) , Flanged Bolt ( With Serrations ) , Assy Bellow , Assy Turning Tube W / O Ball Joint , Assy Ball Joint , Hex Thin Nut M18x1.5 , Hex Bolt ( Turning Tube To Gs Lever ) , O-Ring 10X2 A Nitrile ( Turning Tube To Gs Lever ) , Link Rod , Assy Ball Joint Lh Threads , Assy Ball Joint Rh Threads , Hex Thin Nut M12x1.25 , Assy Bracket , Assy Clutch Pedal Complete , Sintered Bush , Spacer , Rubber Cover , Assy Support Complete ( Clutch ) , Torsion Spring , Clutch Master Cylinder ( 19.05 Dia ) , Clutch Pedal Pin , Bush ( Clutch Pedal ) , Clutch Booster Assy ( 90 Dia ) , Rubbe Stopper , Assy Connecting Line , Pipe Union Bolt , Sealing Washer 12X15.5 Is3175 Al , Assy Hose , Assy Tube , Assy High Pressure Hose , Thrust Ring , O-Ring 12.37X2.62 Ts16220 , Socket , Assy Bracket ( Clutch Booster. ) , Bracket ( Clutch Booster Support ) , Assy Push Rod , Assy Brake Pedal Complete , Sintered Bush , Rubber Cover , Sleeve , Hex Bolt M10x140 Is1364p1-8.8-Ss8451-8C , Brake Pin , Torsion Spring , Assy Fluid Container , Dual Brake Valve With Bias , Purge Tank ( Suitable For Voss ) , Repair Kit ( Major ) Clutch Master Cylinder , Minor Kit Clutch M / Cyl , Crimping Sleeve , Seal , Push Rod , Fork , Circlip , Rubber Bellow , Repair Kit ( Minor ) Clutch Master Cylinder , Valve Seal , Spring Washer , Spring , Gland Seal , Circlip , Rubber Bellow , Crimping Sleeve , Assy Major Repair Kit ( 90 Dia Booster ) , , Consisting Of :- , Gasket , Air Proof Gasket , Banjo Bolt , O Ring , Rubber Pipe , Seal , Air Seal , Seal , Cup Seal , Spring , Washer , Gaiter , Hydraulic Piston , Circlip , Spring Clip , Valve Poppet , Assy Minor Repair Kit ( 90 Dia Booster ) , , Consisting Of :- , Gasket , Air Proof Gasket , O Ring29 X 3.4 , Seal , Air Seal , Seal , Cup Seal , Spring , Circlip , Accl Pedal Module , Hex Fl Scr M6x18 , Nyloc Nut M6 , H / Fl Screw M8x18 , Bracket ( Accl. Pedal Mtg. ) , Assy Frame ( Lpk - / 27 Ex ) , Assy Cross Member ( With Towing Hook ) , Pin , Cross Member Front , Reinforcement - Rh ( Front Spg. Front Bkt ) N , Reinforcement - Lh ( Front Spg.Front Bkt ) , Assy Front Bracket ( For Front Spring ) , Bracket Assy, Engine Mtg , Assy.Reinforcement , Assy Bracket ( Front Brake Hose Mtg. ) , Assy Front Spring Bracket ( Rear ) , Assy Support Lh ( Eng. C.M. - Rear ) , Assy Support Rh ( Eng. C.M. - Rear ) , Reinforcement - Rh , Reinforcement - Lh , Assy Bracket ( Bump Stop Frt. Spring ) , Bracket , Engine Cross Member ( Rear ) , Assy Cross Member , Reinforcement -Rh ( Top ) , Reinforcement -Lh ( Top ) , Reinforcement -Rh ( Bottom ) , Reinforcement -Lh ( Bottom ) , Assy Cross Member ( Rsb Front ) , Spacer ( Rear Spring Bkt. ) , Spring Hanger Bracket ( Rear ) , Slide Support Rear Spring Front , Slide Support Rear Spring Rear , Assy Cross Member ( Rr Sh. Absorber ) , Reinforcement Assy , Reinforcement ( Rh ) Near 7Th Cm , Reinforcement ( Lh ) Near 7Th Cm , Assy Cross Member ( Rear Spring Rear ) , End Cross Member , Assy Air Deflector , Front Underrun Protective Device ( Fupd ) , Assy Beam Fupd , Assy Support Bracket ( Rh ) , Assy Support Bracket ( Lh ) , Tube , Washer , Hex Bolt ( M12x1.5X150 ) , Assy Front Spring ( Normal Camber ) , Assy First Leaf With Bushes ( Normal Camber ) , Bush , Second Leaf ( Normal Camber ) , Third Leaf ( Normal Camber ) , Fourth Leaf ( Normal Camber ) , Fifth Leaf ( Normal Camber ) , Sixth Leaf ( Normal Camber ) , Seventh Leaf ( Normal Camber ) , Eighth Leaf ( Normal Camber ) , Ninth Leaf ( Normal Camber ) , Tenth Leaf ( Normal Camber ) , Eleventh Leaf ( Normal Camber ) , Twelveth Leaf ( Normal Camber ) , Spring Clip ( Normal Camber ) , Spring Clip ( Normal Camber ) , Centre Bolt ( Extended Head ) Front Spring , Assy Front Spring ( Higher Camber ) , Assy First Leaf With Bushes ( Higher Camber ) , Bush , Second Leaf ( Higher Camber ) , Third Leaf ( Higher Camber ) , Fourth Leaf ( Higher Camber ) , Fifth Leaf ( Higher Camber ) , Sixth Leaf ( Higher Camber ) , Seventh Leaf ( Higher Camber ) , Eighth Leaf ( Higher Camber ) , Ninth Leaf ( Higher Camber ) , Tenth Leaf ( Higher Camber ) , Eleventh Leaf ( Higher Camber ) , Twelveth Leaf ( Higher Camber ) , Spring Clip ( Higher Camber ) , Centre Bolt ( Extended Head ) Front Spring , Assy Shackle With Bush , Bush , Spring Pin , Assy Sealing Ring , Locking Plate , Grease Nipple Am8x1 , Rubber Buffer ( Front ) , Hex Nut M 16X1.5 , Caster Plate , U - Clamp , Guide Plate ( Cast ) Front , Assy Front Shock Absorber , Bush ( Front Shock Absorber ) , Assy Front Shock Absorber Bracket , Washer , Nyloc Nut M 16X1.5 , Bracket Bottom ( Front Shock Absorber Mtg. ) , Hex Bolt M 12X1.5X52 , Tab Washer 13 , Assy Rear Spring With Aux. Spring , Assy First Leaf With Bushes , Bimetallic Spring Bush - 22 Dia , Second Leaf ( Main Spring ) , Third Leaf ( Main Spring ) , Fourth Leaf ( Main Spring ) , Fifth Leaf ( Main Spring ) , Sixth Leaf ( Main Spring ) , Seventh Leaf ( Main Spring ) , Eighth Leaf ( Main Spring ) , Support Plate ( Rear Spr. Assy With Aux.Spr ) , First Leaf ( Aux. Spring ) , Second Leaf ( Aux. Spring ) , Third Leaf ( Aux. Spring ) , Fourth Leaf ( Aux. Spring ) , Fifth Leaf ( Aux. Spring ) , Sixth Leaf ( Aux. Spring ) , Seventh Leaf ( Aux. Spring ) , Spring Clip , Spring Pin , Assy Sealing Ring , Locking Plate , Hex. Screw M 8X16 , Grease Nipple , Assy Shackle With Bush , Bimetallic Spring Bush - 22 Dia , Assy Rubber Buffer , Guide Plate Cast , U Bolt For Rear Leaf Spring Assy , Hex. Nut M 16X1.5 , Spherical Washer , Assy Rear Shock Absorber , Washer , Hex Bolt M 16X1.5X125 , Nyloc Nut M 16X1.5 , Assy Front Axle With Brakes , Front Axle Beam ( Std ) , Cotter Pin , Hex Nut M 12 , Assy Stub Axle With Bush Std , Seal Race ( Stub Axle ) , Steering Bush , Thrust Washer , Split Nut , Cap Screw M 10X25 , Washer , Dust Cap , Grease Nipple Am8x1 , King Pin Cap , Sealing Ring , Internal Circlip 40X1.75 N , King Pin ( Std ) , Thrust Bearing ( Normal ) , Thrust Bearing ( Std ) , Shim Thk. , Oil Seal , Spacer ( Between Bearings ) , Taper Roller Bearing ( Frnt.Hub Inner ) , Shim Thk. , Brake Drum , Front Hub , Hub Pin Front , Taper Roller Bearing , Hub Cover Front , Tie Rod Arm ( Lh ) , Tie Rod Arm ( Rh ) , Steering Arm Rh , Assy Tie Rod , Assy Ball Joint L.H , Assy Ball Joint R.H. , King Pin Minor Kit - - , Consists Of: , Cotter Pin , Spring Washer B - 12 , Hex Nut M - 12 , Internal Circlip , Assy Cap, Ring & Grease Nipple , Repair Kit King Pin - -Std Full , Consists Of: , King Pin -Std. , King Pin Bush , Thrust Bearing , Thrust Pad , King Pin Pair -Std , King Pin Set Minor Kit -Std , King Pin Minor Kit - - , King Pin Unit Minor Kit & Bush -Std , King Pin -Std. , King Pin Bush , King Pin Minor Kit - - , Assy Fa Brk Rh With Dust Cover , Assy Fa Brk Lh With Dust Cover. , Spider Front Lh , Spider Front Rh , Assy Chamber Mtg. Bracket Lh , Assy Chamber Mtg. Bracket Rh , Cam Shaft Lh , Cam Shaft Rh , Oil Seal , Bush ( Bronze ) , Sleeve ( Delrin ) , Shim , Circlip , Brake Lining Set Std.Kit , Brake Lining Set Os1 Kit , Brake Lining Set Os2 Kit , Roller , Spring Pull Off ( Cam End ) , Spring Pull Off ( Fulcrum End ) , Fulcrum Pin , Drum Brake Bush Fulcrum , Dust Cover Front ( Bottom ) , Dust Cover Front ( Top ) , Grommet , Collered Pin , Pin , Hex Bolt ( Strg. Arm Rear Side ) , Hex Bolt ( W / O Strg. Arm Side ) , Hex Bolt ( Strg. Arm Front Side ) , Assy Rear Axle Ra-1068 Comp W / S-Cam Brks33 / 8 , Assy Rear Axle Beam W / Pressure Ring Dowelstuds. , Assy Rear Axle Beam Machined ( Ra 1068 ) -Bus , Pressure Ring , Stud , Cyl Pin , Assy Carrier Housing Comp ( 33 / 8 ) W / Diff. , Bright Washer , Spring Washer , Hex Nut M10 , Hex Thin Nut M10 , Collar Scr M12x70 , Assy Rear Hub Comp ( W / O Abs ) , Rear Hub ( Ra 1068 ) , Hub Pin , Taper Roller Bearing ( Hub Inner 75X125x37 ) , Tapered Roller Brg , Spacer Ring For Hub Inner Oil Seal , Hub Inner Seal ( 100 X 125 X 12 ) , Oil Seal ( Hub Outer ) , Oil Catcher ( Ra 1068 ) , Spacer ( Between Rear Hub Bearing ) , Shim Thk , Shim 1.5 Thk , Spacer ( Oil Seal Mtg ) , Hub Locking Nut , Tongue Spacer ( With Holes ) , Spring Washer B8 Is3063 Ss8451-8C , Hex Screw M8x18 , Gasket ( Betn Rear Hub & Axle Shaft ) , Rear Axle Shaft ( Ra 1068 ) , Serrated Hex Bolt ( Axle Shaft To Hub ) , Pressure Relief Valve , Magnetic Drain Plug ( Allen Type ) , Assy Carrier Housing ( Ra 1068 ) , Cyl Pin 6H8x16 , Boltplummer Block Cover , Differential Threaded Ring , Dowel Sleeve Heavy 6X24 , Adjusting Pin , Hex Thin Nut M18x1.5 , Depth Setting Shim 0.1 Thk ( Between Carrier Hsg ) , Assy Crown Wheel & Pinion33 / 8Spirac , Spring Washer B10 , Screw M10x30 8.8 , Tail Pinion Nose Bearing ( 35X72x23 ) , Taper Roller Brg ( 54X124x36.5 ) , Spacer ( Bet.Hyp.Pinion Brgs. ) , Pinion Bearing Preloading Shim Thk , Pinion Bearing Preloading Shim Thk , Pinion Housing ( Cast ) , O Ring , Oil Slwinger ( For Tail Pinion ) , Spacer ( Bet.Pinion Brg.& Flange ) , Oil Seal Housing ( Tail Pinion ) , Oil Seal ( Rear ) Cr Seals ( 58X75x11 ) , Dust Seal ( Mechanical ) , Assy Coupling Fange ( 130 Od ) , Coupling Flange ( 130 Od ) , Hex Nut ( Tail Pinion Coupling Flange ) , Differential Housing Assy ( Ra 1068 ) , Serrated Bolt ( M12x1.75X55 ) , Diff.Bevel Pinion , Rear Axle Shaft Gear , Spherical Washer , Thrust Washer Rear Axle Shaft Gear , Thrust Washer 2.05 Thk , Differential Spider , Taper Roller Bearing ( 70X115x29 ) , Assy Rear Axle Brake Rh W / Dust Cover , Assy Rear Axle Brake Lh W / Dust Cover , Spring Washer , Hexbolt M14x1.5X45 , Hex Nut M14x1.5 , Brake Chember Assy Mtg Bkt Rh , Rear Brake Chember Mtg Bkt Lh , Cam Bush , Oil Seal B32x45x7 , Grease Nipple Am8x1 , Slack Adjustor Lh 16 Mm Offset , Automatic Slack Adjuster Rear Lh Mei , Slack Adjustor Rh 16 Mm Offset , Autimatic Slack Adjuster Rear Rh-Mei , Anchor Bracket-Rh , Anchor Bracket-Lh , Spacer , Shim , Nyloc Nut M8 , Rear Brake Drum , Spring Brake Actuator ( T-12 / 12 ) Scl-Voss , Anchor Bracket-Front , Assy Rear Axle Brake Rh W / Dust Cover , Assy Rear Axle Brake Lh W / Dust Cover , Torque Plate , Rear Camshaft Lh , Rear Camshaft Rh , Kit Bush Assy , Consists Of : , Bush , Bush Fulcrum , Oil Seal , Circlip , Washer , Shim , Washer , Spring-Abutment End , Spring-Cam End , Grease Nipple , Dust Cover Top , Dust Cover Bottom , Bush ( Bronze ) , Drum Brake Bush Fulcrum , Oil Seal , Roller , Fulcrum Pin , Spring Pull Off-Cam End , Spring-Fulcrum End , Grommet , Assy Brake Shoe With Af235 Liner , Brake Lining Set Std.Kit , Brake Lining Set Os1 Kit , Brake Lining Set Os2 Kit , Assy Wheel Rim6.00Gx16 , Assy Wheel Nut , Assy Spare Wheel Carrier , Reinforcement , Propeller Shaft Assy;Rear , Flange Yoke Full Rnd , Uj Kit , Slip Yoke Assy , Propeller Shaft, Seal , Propeller Shaft, Seal Guard , Cross Assy , Flange Yoke Full Rnd , Propeller Shaft Assy Guard , Bolt , Locking Plate , Double Socket , Sealing Washer 22X27 Is3175 Al , Assy Metal Pipe With Crimped Teflon Hose , Assy Metal Pipe Second From Comp To Ddu , Assy Metal Pipe Third From Comp To Ddu , Ddu Hi Prvoss Portwo Cntl Port-120Mm , Nylon Pipe , Assy Mag.Valve ( Ex.Brake ) W / Voss , Nylon Pipe , Sub Assy Air Tank-110 Strap Centre Dist , Assy Strap , Pin , Spacer Block , Drain Valve With Filter , Thrust Ring , O-Ring 20.30X2.62 Ts16220 , Nylon Pipe , Dual Brake Valve With Bias , Nylon Pipe , Quick Release Valve ( 3 Port Voss ) , Bracket For Quick Release Valve , Nylon Pipe , Lock Nut M18x1.5 , Assy Hose 3 / 8With O-Ring & 490Mm Length , Front Brake Chamber , Assy Slack Adjuster Straight , Anchor Bracket-Front , Shim , Spacer , Collared Pin , Pin , Hex. Bolt ( Stg. Arm Rear Side ) , Hex. Bolt ( W / O Stg. Arm Side ) , Hex. Bolt ( Stg.Arm Front Side ) , Nylon Pipe , Auto.Load Sensing Valve , Bracket Lcrv Mtg , Assy Pull Rod ( For M / S.Scl L.C.R.V. ) , Assy Bracket ( Lcrv Pull Rod ) , Voss Connector M16x1.5 ( Ng8m16 ) -Lcrv Del.Port , Nylon Pipe , Rg2 Relay Valve Delivery Port Metric , Bracket ( Relay Valve Mtg. ) , Nylon Pipe , 3 / 8Hose Assy With Oring Nipple 615Lg , Double Socket , Spring Brake Actuator ( Type-12 / 12 ) , Automatic Slack Adjuster Lh , Mei Automatic Slack Adjuster Rear Lh , Automatic Slack Adjuster Rh , Mei Autimatic Slack Adjuster Rear Rh , Assy Hose 3 / 8With O-Ring & 490Mm Length , Graduated Hand Control Valve , Nylon Pipe , Bracket ( Hose Mtg Rear ) , Assy Bracket ( Front Brake Hose Mtg. ) , Assy Nylon Pipe Set Chassis Comp. , Assy Nylon Pipe Set Cab Compl. , Assy Type 14 Brake Chamber M / S.Scl , Diaphragm ( Type 14 ) , Spring Brake Actuator ( Type-12 / 12 ) , Repair Kit ( Type12 / 12 Sba ) , Consists Of : , Bearing , Dust Seal , Elbow , Knurl Pin , Gaiter , Tube ( Spring Brak Accuator ) , Check Valve , Sealing Ring , Diaphragm , Split Pin , Sealing Ring , Retainer Ng-12 , Sealing Ring Ng12 , Washer , Spring Element Ng12 , Grease Sachet , Seal , Ddu Hi Pr, Voss Port, Wo Cntl Port120mm , Repair Kit Drying & Distribution Unit Hi Pr Voss ( Scl ) , Dessicant Cartridge , Filter , Spring , Valve Seat , Spherical Valve , Silencer Assy , Gasket , Sealing Ring , Valve , Spring , Diaphragm , Lip Seal Assy , Special Washer , Cap , Gasket , Bonded Valve , Inlet Valve Spring , Diaphragm , Exhaust Flap , Sealing Ring , Spherical Valve , Ng12 Retaining Clip , Ng8 Spring Element , Spring Element , P2c Fitting , Grease Sachet , Dual Brake Valve With Bias , Repair Kit ( Msp6 / 23 ) Dual Brake Valve , Consists Of: , Boot , Spring Seat , Sealing Ring , Valve , Spring , O Ring , Sealing Ring Ng12 , Spring Element Ng12 , Filter-Dual Brake Valve , Bottom Cover , Mesh , Rubber Spring , Sealing Ring Ng8 , Spring Element Ng8 , Guide Ring , Retaing Clip Ng12 , Retaing Clip Ng8 , Sealing Ring Ng12 , Sealing Ring Ng8 , O Ring , Grease Sachet , Quick Release Valve ( 3 Port Voss ) , Repair Kit Quick Release Valve , Consists Of: , Sealing Ring , Diaphragm , Grease Sachet , Auto.Load Sensing Valve For Voss , Repair Kit For Automatic Load Sensing Valve, , Consists Of: , Sealing Ring , Bonded Valve , Retaing Clip , Diaphragm Disc , Diaphragm , Seal , Dust Seal , Split Pin , Split Bush , Sealing Ring Ng12 , Spring Element Ng8 , Grease Sachet , Rg2 Relay Valve- Delivery Port Metric , Repair Kit ( Relay Valve ) , Consists Of : , Sealing Ring Ng8 , Retaing Clip Ng8 , Spring Element Ng8 , Sealing Ring , Retaing Clip Ng12 , Spring Element Ng12 , Valve , Valve Spring , Sealing Ring , Silencer Assy , Valve Guide , Sealing Ring , Sealing Ring Ng8 , Filter , Graduated Hand Control Valve , Repair Kit Graduated Hand Brake Valve, , Consists Of: , Valve , Sealing Ring , Valve Spring , Filter , Strainer Plate , Washer , Shim , Sealing Ring , Tension Pin , Gaiter , Spring , Ng8 Retaining Clip , Ng8 Spring Element , Ng12 Retaining Clip , Split Pin , Spring Element , P2c Fitting , Grease Sachet , Assy Column W / O Steering Wheel W / Spindle , Assy Steering Column , Assy Steering Spindle Top , Circlip 20X1.2 N , S.R.D.G. Ball Bearing , Spacer , Spring Seat , Compression Spring , Spring Seat Cup , Assy Universal Joint , Bolt. , Assy Steering Wheel ( 420 Dia.Gray ) , T Emblem , Assy Strg. Spindle , Steering Spindle Bottom , Rubber Bellow , Clamping Ring , Pitman Arm , Assy Drag Link Rhd , Ball Joint End Assy, Rh , Rubber Bellow ( Floor ) , Power Steering Pipe Lines , Assy Pipe ( Res. Tank To Pump ) , Hose Clamp 35 , Banjo Body , Banjo , Assy Pipe ( Pump To Gear Box ) , Assy Pipe Return Line ( G.B To Res.Tank ) , Assy Male Adaptor , Assy. Steering Gear Box Mtg. Bkt ( Rhd ) , Set A ( Optional Set B ) , Banjo Body , Sealing Washer 16X20 Is3175 Cu , Set B ( Optional Set A ) , Elbow ( M16x1.5 ) , Lock Nut M16x1.5 Is10410 Ss8451-8C , Sealing Ring Assy , Set C ( Optional Set D ) , Elbow ( M18x1.5 ) , Lock Nut M18x1.5 Is10410 Ss8451-8C , Thrust Ring , O-Ring 17.12X2.62 , Set D ( Optional Set C ) , Banjo Body , Banjo M18x1.5 Ts 16408 , Sealing Washer 18X22 Is3175 Cu , Power Steering Components M / S Zf , Plastic Oil Tank With Bracket Assly ( Zf ) , Assy Steering Gear Box ( Zf ) Rh , Assy Strg.Pump-Zf , Power Steering Components ( Chinese ) , Plastic Reservoir Assy , Assy Power Strg Gear Box-Rh ( Chinese ) , Strg Pump Assy Complete ( Hubei Triring ) , Assy Strg.Pump-Zf , Pump Seal Kit, Zf , Consisting Of : , Oil Seal , O Ring , Support Ring , Protecting Sealing Ring , Assy Power Steering Gear Box ( Zf ) , Rh , Seal Kit ( Power Steering Gear Box ) , Dust Seal , Support Ring , Sealing Ring , Sealing Nut , O Ring , Protective Cap , Gasket , Assy Power Steering Hydraulic Tank ( Zf ) , Assy Filter , Assy Power Strg Gear Box-Rh ( Chinese ) , Major Spare Part Kits , Dust Cover For Input Shaft , Dirt And Water Seal , Retaining Ring , Oil Seal Assy , Sealing Ring For Input Shaft , O Ring For Input Shaft , O Ring For Valve Housing , Thrust Needle Roller Bearing , Sealing Ring For Valve Sleeve , O Ring For Valve Sleeve , O Ring For Worm Shaft , Sealing Ring For Worm Shaft , Sealing Ring For Rack Piston , O Ring For Rack Piston , Rectangular Seal For Ball Pipe Clamp , Sealing Nut , Sealing Ring , High Pressure Sealing Ring , Side Cover Washer , O Ring For Housing , Sealing Nut , Rubber Cover For Preventing Dust , Tab Washer / Locking Plate , Housing Assy , Needle Roller Bearing , Housing , Sealing Ring , High Pressure Sealing Ring , Valve Housing Assy , Retaining Ring , Dirt And Water Seal , Oil Seal Washer , Oil Seal Assy , Sealing Ring For Input Shaft , O Ring For Input Shaft , Taper Screw Plugs , Valve Housing , Input Shaft, Worm Shaft And Valve Assy , Sealing Ring For Valve Sleeve , O Ring For Valve Sleeve , Valve Sleeve , Input Shaft , Pin , O Ring For Screw Shaft , Sealing Ring For Screw Shaft , Torsion Bar , Driving Ring , Worm Shaft , Pin , Holding Device , Worm Shaft Plug , Piston Assy , Unloading Valve Socket , Unloading Valve Pole , Compression Spring , Nylon Pole , Rack Piston , Sealing Ring Piston , O Ring For Piston , Sector Shaft Assy , Holding Device For Sector Sht , Adjusting Screw , Sector Shaft Plug , Sector Shaft , Side Cover Assy , Needle Roller Bearing , Housing Cover-Side Cover , Sealing Ring , High Pressure Sealing Ring , Assy Pump Power Strg. ( Chinese ) , Major Repair Kit For Small Pump-Chines , Oil Seal 15286 , O-Ring 131.5G , O-Ring 662G , Rotor , Vane , Cam Ring , O-Ring 152G , O-Ring 121.5G , O-Ring 9.51.5G , Front Oil Plate , Back Oil Plate , Minor Repair Kit For Small Pump-Chines , Oil Seal 15286 , O-Ring 131.5G , O-Ring 662G , O-Ring 152G , O-Ring 9.51.5G , O-Ring 121.5G , Plastic Reservoir Assy , Repair Kit For Reservoir , Consists Of: , O Ring Filter Element Top , Top Cover Seal Ring , Cap Seal , Baffle Cap Seal , Seal Oil Filter Bottom , Filter Element Assy , Assy Fuel Tank Comp With Strap & Support , Assy Fuel Tank Complete ( W / O Strap & Sup ) , Sealing Washer 38X44 Al , Assy Fuel Tank Cap , Tank Unit , Assy Bracket ( Fuel Tank Mtg ) , Assy Strap , Rubber Packing , Hose Clip 17 Ts17669 , Assy Suction Line ( Tank To Strainer ) , Pipe Union Bolt 10 M14x1.5 Ts16405 , Assy Suction Line ( Strnr To Feed Pump ) , Assy Return Line ( Fip To Long Member-Lh ) , Assy Return Line ( Long Member- Fuel Tank ) , Assy Pipe Union Bolt , Fuel Strainer , Assy Clamp , Sealing Washer 14X18 Is3175 Al , Assy Front Exhaust Pipe , Sealing Flange , Assy Mag.Valve ( Ex.Brake ) W / Voss 12V , Assy Exhaust Brake Unit. , Gasket , Assy Bracket. , Pin , Assy Silencetr ( With Tailpipe ) , Assy Mounting Strap ( Nt6 Silencer ) , Assy Plate With Hook ( Silencer Mtg. ) , Rubber Hanger. , Assy Bracket ( Silencer Mtg.Top ) , Assy Plate With Hook , Assy Bottom Noise Shield Complete , Assy Bottom Noise Shield Rear , Bracket Assy , Assy Bracket , Bracket ( Noise Shield ) , Assy Radiator W / O Frame ( Vave Type ) -Alkraft , Assy Radiator ( Vave Type ) :Tata Toyo , Assy Radiator : No Loss Tank-Tata Toyo , Assy Radiator Mtg. Pad Bottom 50 Mm , Pressure Cap ( Tata Toyo ) , Drain Cock , Assy Radiator Frame , Assy Bracket Radiator Bottom Mounting , Assy Radiator Mtg. Pad Side , Radiator Mounting Bracket ( On Long Member ) , Fan Shroud ( 515 Dia Fan ) :497 Tcic Bs:Iii , Recovery Coolant Tank , Coolant Fill Pipe With Pressure Cap , Rubber Hose ( Coolant Fill Pipe To Radiator ) , Spring Band Clamp 55Dx12w , Rubber Hose ( Radiator To Water Pump ) , Hose Clamp ( 53 Dia. ) , Hose Clamp ( 72 Dia. ) , Hose ( No Loss Tank To Filler Pipe ) , Hose Clamp ( 16 Dia. ) , Hose ( T.Vent To Coolant Filling Pipe ) , Hose ( Coolant Filling Pipe To Rad Vent ) , Hose Clamp ( 18 Dia. ) , Support Plate For Coolant Filler Pipe , Assy Thermostat Wjiggle Pins:83 Deg:Nlt , Hose ( Ucw Line To Thermostat ) :Euro Iii , Hose Clamp ( 50 Dia. ) , Rubber Hose ( Thermostat To Water Pump ) , Spr. Bd Clamp 17Dx12w , Hose Clamp ( 50 Dia. ) , Spr. Bd Clamp 15Dx12w , Spr. Bd Clamp 14Dx12w , Assy Batt.Cable Ve 1.15Lg W / Cot 35Sq , Assy Batt.Cable -Ve 1.35Lg W / Cot 35Sq , Assy Batt.Carrier , Channel ( Battary Clamping ) , Clamping Stud , Assy Horn ( M26 ) With Pig Tail , Earth Strap , Assy Engine Lamp W / 12V Bulb , Head Lamp 1.3 Lh Clr Lens 12V , Head Lamp 1.3 Rh Clr Lens 12V , Assy Front Blinker Lamp-Lh-12V , Assy Front Blinker Lamp-Rh-12V , 4Ch Clr Lens Tail Lamp W / Bulb-Lh-12V , 4Ch Clr Lens Tail Lamp W / Bulb-Rh-12V , Assy Tail Lamp Bracket Rh-Rhd , Assy Tail Lamp Bracket Lh-Rhd , Steering Lock Cum Ignition Switch , Assy Cab Lamp ( With Bulb ) , Lamp 12V 10W M12 / 6 Ba15s , Wiring Harness Main , Wiring Harness Tail , Wiring Harness Parking -Mssl , Wiring Harness Pig Tail L.P.Sw.And B / F Bottle-Mssl , Wiring Harness Engine , Wiring Harness Roof , Wiring Harness Sensor , Wiring Harness Switch With Pto , Ecu, Ems Vp37 For Diesel Engine Euro-Iii , Boost Pressure / Temp Sensor , Water Temp Sensor , Engine Speed Sensor , Speed Sensor 12 / 24V ( 8 Pulse ) Espeedo , Water In Fuel Indicator , Fan Out Unit For Eiii Espeedo12v / 24V , Assy Seat Belt&Door Ajar Bepper , End Outline Marker Lamp , Head Lamp Levelling Switch , Double Contact Brake Switch , Assy Bracket ( For Fuse Box & Relay ) , Digital Hour Meter , Inst Cluster Espeedo Lpk912 1:0.76- Ms / . Minda , Fuel Gauge , Temperature Gauge , Air Pressure Gauge , Speedometer 0.76 Espeedo , Piano Switch Exhaust Brake On , Piano Switch ( Engine Lamp ) , Piano Sw. ( Power Take Off ) W / O Conn. , Combi Switch , Low Air Pressure Switch , Partially Fitted Cab W / O Electicals & Controls , Assy Body Shell Painted- ( Bare Cab ) , Assy Fender Complete Lh , Assy Fender Complete Rh , Assy Panel Corner Bottom Lh , Assy Panel Corner Bottom Rh , Assy Outer Panel Corner Comp. ( Front ) Lh , Assy Outer Panel Corner Comp. ( Front ) Rh , Assy Cover ( Grey ) -Lh ( Panel Outer Corner Front ) , Assy Cover ( Grey ) -Rh ( Panel Outer Corner Front ) , Assy Centre Flap , Assy Side Wall Complete Lh , Assy Side Wall Complete Rh , Assy Support Front ( Grill ) , Step Board. , Roof Panel Rhd , Assy Pvc Floor Mat-Rhd , Rubber Mould ( Windshield Glass 5.76 Thick ) , Windshield ( Tinted Band ) , Rubber Mould-Rear Window Keyless Prof. , Assy Rear Window Compt.With Tinted Glass , Assy Panel Inner W / S Bottom , Gusset ( Panel Inner W / S Bottom ) , Assy Panel Outer W / S Bottom , Dashboard Centre ( Grey Pigmented ) -Rhd , Reinforcement Middle-Lh , Reinforcement Middle-Rh , Assy Cross Member-Rhd ( D.B.Mtg. ) , Assy Suport ( D.B.Cross Member ) , Dashboard Lh ( Grey ) , Dashboard Rh ( Grey ) , Reinforcement ( Front ) , Assy Reinforcement Inside ( Glove Box ) , Assy Reinforcement Complete Inside Rhd , Assy Reinforcement ( Outside ) , Assy.Reinforcement ( Top ) , Assy Bracket Dash Board Mtg , Assy Glove Box ( Grey ) , Cover Dash Mounting ( Grey ) , Assy Bracket Dash Board Mtg , Assy Kit For Nacelle ( Grey ) , Nacelle Front , Nacelle Rear , Assy Bracket Lh , Assy Bracket Rh , Cover Clutch Bottle , Assy Ventilation Nozzle , Cover Centre ( Dark Grey ) , Speaker Grill , Garnish ( For Middle Defrost ) , Garnish ( For Side Defrost ) , Cover ( T -Emblem ) Dashboard Assy Door Shell-Lh , Assy Door Shell-Rh , Assy Hinge Top Lh ( Door ) , Assy Hinge Top Rh ( Door ) , Assy Hinge Bottom Lh ( Door ) , Assy Hinge Bottom Rh ( Door ) , Assy Guide Channel Lh , Assy Guide Channel Rh , Assy Dovetail Bottom ( Door ) , Dovetail Bottom ( Body Side ) , Cover Panel Inner ( Front Corner ) -Lh , Cover Panel Inner ( Front Corner ) -Rh , Velvet Channel , Assy Padding Door L.H. , Assy Padding Door Rh , Assy Door Pad Clip. , Holder Outer Sealing Rh ( Rear ) , Holder Outer Sealing Lh ( Rear ) , Assy Sealing Mould Rh ( Outer ) , Assy Sealing Mould Lh ( Outer ) , Assy Sealing Inner Lh , Assy Sealing Inner Rh , Magazine Pocket ( Grey ) Lh , Magazine Pocket ( Grey ) Rh , Grab_Handle_Door , Reflex Reflector ( Front Door ) , Weather Strip R.H. , Weather Strip L.H. , Protective Cover-Rh ( Door Inner Beading ) , Protective Cover-Lh ( Door Inner Beading ) , Door Lock Front Lh , Door Lock Front Rh , Assy Inner Handle , Assy Outer Handle Lh , Assy Outer Door Handle Rh , Link Lh ( Inner Handle ) , Link Rh ( Inner Handle ) , Link ( Pop - Up Knob ) Lh , Link Rh ( Pop-Up Knob ) , Knob ( Inner Lock ) , Link ( Outer Handle ) , Lever Lh ( Lock Cylinder To Latch ) , Lever Rh ( Lock Cylinder To Latch ) , Assy Striker ( Door Lock ) , Lock Kits , Kit For Locks , Consisting Of : , Assy Outer Door Handle Lh , Assy Outer Door Handle Rh , Assy Key , Assy Glove Box Lock , Steering Lock Cum Ignition Switch , Assy.Winding Regulator Lh , Window Regulator Lh , Assy.Winding Regulator Rh , Window Regulator Rh , Assy.Handle ( For Window Regulator ) , Assy Handle Window Winding , Door Glass Lh Tinted ( Light Green ) , Door Glass Rh Tinted ( Light Green ) , Holder ( Regulating Glass ) , Assy Door Strap Complete , Assy Centre Flap , Bottom Beading ( Centre Flap ) , Beading Front Panel , Beading ( Fire Wall ) , Assy Hinge ( Centre Flap ) , Assy Lock ( Centre Flap ) , Assy Stay Rod Complete , Bush C / Flap Stay Rod , Pin C / Flap Stay Rod , Assy Rubber Buffer , Assy Release Cable Complete ( Centre Flap ) , Assy Striker ( Centre Flap ) , Clamp Bonnet Stay Rod , Assy Grab Handle , Assy Centre Grill With T Emblem & Net - Grey , Assy Centre Grill With T Emblm & Net - Black , T-Emblem ( Mesh Center Grill Front ) , Assy Bazzle-Rh , Assy Bazzle-Lh ( Grey ) , Bracket ( Bazzle Mtg ) , Assy Cover Bazzle-Lh , Assy Cover Bazzle-Rh , Assy Cover Side-Lh ( Centre Flap ) , Assy Cover Side-Rh ( Centre Flap ) , Assy Cover Middle With Tataletters - Grey Colour , Assy Cover Middle With Tata C / Flap-Black Colour , Grill Side Lh, ( W / S ) , Grill Side Rh, ( W / S ) , Grill Middle , Packing Grill W / S Bottom , Spring Clip Inner Lining , Screw Grommet , Grab Handle , Assy Cover Lh ( Centre Flap Hinge ) , Assy Cover Rh ( Centre Flap Hinge ) , Assy Sunvisor Lh , Assy Sunvisor Rh , Assy Door Cladding -Lh , Assy Door Cladding -Rh , Assy Kit For Rvm With Frame-Lh , Assy Kit For Rvm With Frame-Rh , Assy Rear View Mirror-Lh , Assy Rear View Mirror-Rh , Bracket Top Lh. ( R.V.M. ) , Bracket Top Rh. ( R.V.M. ) , Sleeve ( For Frame R.V.M ) , Rubber Pad ( Bracket Top R.V.M ) , Bracket Bottom Lh. ( R.V.M. ) , Bracket Bottom Rh. ( R.V.M. ) , Cap For Rear View Mirror , Assy Wide Angle Mirror , Assy -Hd Bs-Iii Mascot , Assy Mascot Bsiii , Letter T , Letter A , Ex Decal ( Silver ) , Assy Sticker Turbo Intercooler , Cover Step Board , Assy Head Lamp Dome. , Assy Head Lamp Dome-Lh ( Rhd ) , Assy Knob , Retro-Reflective Tape ( White 1955 Lg ) , Wiper Motor 17Wh / P-Rhd-140-Mssl-Lucas , Assy Wiper Arm & Blade ( 550 Mm. ) Rhd-Bcs , Assy Wiper Arm , Assy Wiper Blade , Assy Bracket ( Wiper Motor Mtg. ) , Gasket ( Bracket To Fire Wall ) , Repair Kit For Accessories Wiper , Consisting Of : , Assy Wheel Box ( 58.13 Mm ) , Assy Link ( 792 ) , Assy Link ( 183 ) , Assy Wheel Box Co-Driver ( 45 Mm ) , Kit W / S Washer Unit Lhd 12V-Prabha , Consisting Of : , Assy Twin Self Nozzle , Tube ( 1750 Mm Long ) , Pump With Motor And Tank , Omega Clip , Assy Bracket W / S Washer Mounting , Assy Ventilation Nozzle , Duct Outer Lh ( W / S Bottom ) , Duct Outer Rh ( W / S Bottom ) , Duct Inner ( Wind Shield Bottom ) , Hose ( Ventilation ) , Elbow Duct Lh , Elbow Duct Rh , Assy Ventilation Grill ( Leg Room ) , Assy Bracket ( Elbow Duct Mtg. ) , Air Deflector ( Leg Room Ventilation ) , Assy Bumper Complete , Assy Support Lh ( Bumper Mtg ) , Assy Support Rh ( Bumper Mtg ) , Assy Bracket-Lh ( Bumper Mtg. ) , Assy Bracket-Rh ( Bumper Mtg. ) , Assy Reflex Reflector - White , Assy Cross Tube ( Torsion Bar ) Rhd , Serrated Bush Rh ( Cross Tube ) , Spacer Bush , Assy_Rubber_Bush ( Frt_Mtg ) , Mounting Bracket Bottom Lh Rhd ( Front ) , Mounting Bracket Bottom Rh Rhd , Torsion Bar , Adjuster Rh ( Torsion Bar ) , Shim , Special_Adjuster_Bolt , Assy Nutplate ( Front Mtg. ) , Assy Stay Complete , Assy Cab Mtg Mechanism ( Cab Side Lh ) , Assy Cab Mtg Mechanism ( Cab Side Rh ) , Pin ( Lock Mechanism ) , Assy Handle Mtg ( Cab Locking Mechanism ) , Assy Connecting Link Lh , Assy Connecting Link Rh , Assy Secondary Lock ( Locking Mechanism ) , Assy Mtg.Bracket Lh ( Chassis Side ) , Assy Mtg.Bracket Rh ( Chassis Side ) , Assy Tie Member ( Rear Mtg. ) Rhd Cowl , Washer , Assy Mtg. Hook ( Cab Locking Mech. ) , Plate ( Cab Locking Mechanism ) , Mounting Cup ( Cab Locking Mechanism ) , Rubber Mounting ( Upper ) , Assy_Rubber_Mtg_Lower_ ( Cablocking_Mechan , Spacer ( Rear Mounting ) , Bright Washer 17 , Spring Washer B8 Is3063 Ss8451-8C , Nyloc Nut M 16X1.5 , Assy Bracket Upper ( Chassis Side ) , Assy_Mtg_Pad ( Cab_Locking_Mechanism ) , Mudguard, Lh , Mudguard_Rh , Support ( Rear Mudgaurd Mtg. ) , Assy Support Bottom L.H. ( Mudguard ) . , Assy Support Bottom R.H. ( Mudguard ) . , Clamp Rear Mudguard Mounting , Sealing ( Rear Mudguard ) , Assy Kit For Mudflap-Lh , Assy Kit For Mudflap-Rh , Mud Flap Front Inner Lh-Rhd , Mud Flap Front Inner Rh-Rhd , Assy Mudflap Front Outer-Lh , Assy Mudflap Front Outer-Rh , Assy Mudflap Middle Inner W / Extn.Comp-Rh , Assy Mudflap Middle Inner W / Extn.Comp-Lh , Mudflap Rear ( Spray Suppression ) , Assy Bracket Bottom Lh ( Mud Flap Mtg ) , Assy Bracket Bottom Rh Mudflap Mtg , Assy Driver Seat With Head Rest-Rhd. , Assy Co-Driver Seat Complete-Rhd , Assy Seat Belt Kit Complete ( Passive ) , Seat Belt ( Middle Passenger ) , Seat Belt ( Co - Driver Side ) , Seat Belt ( Driver Side ) , Assy Bracket Bottom L.H.Seat Belt Mtg , Assy Seat Box Compl.Rhd ( Driver Seat ) , Cover ( Seat Belt Anchorage ) , Group ( B ) Machining Work Radiator Tank Repair , Chokup Radiator Cleaning , New Cylinder Liner Fitting To Engine Block , Cutting The Engine Crank And Make It According To The Size , Making Connecting Rod Bush Standard And Fitting , Camshaft Bush Cutting And Fitting , Cylinder Head Wall Guide Fitting , Surfacing The Head Cylinder , Fitting Cylinder Head Valve Seat , Fuel Injection Pump Overall , Fuel Injection Pump Repair , Fuel Injector Overall , Fuel Injector Repair , G.B Main Shaft Machining Of Gear Box , G.B Top Shaft Machining , Fitting Lining To The Clutch Plate , Flywheel Machining , Pressure Plate Machining , Fitting Joint Yoke To Propeller Shaft , Fitting Sleeve Shaft To Propeller Shaft , Fitting Of D.D Valve Repair Kit , Fitting Of Brake Valve Kit , Brake Drum Cutting , Fitting Of Kingpin Bush To Stub Axle , Removing Wheel Disc Out , Making A New Holes To The Wheel Disc , Removing Out Of Joint , Welding Of Crowning Teeth , Welding Of Pinion Teeth , Leaf Spring Set Cambering ( Spring Bending ) , Fitting Center Bolts , Removing Bend Of Front Axle , Rear Axle Bearing Slot Welding And Making Standard Size , Front Axle Bearing Slot Welding And Making Standard Size , Front Body Show Denting Work Of Vehicle , Side Body Show Denting Work Of Vehicle , Rear Body Show Denting Work Of Vehicle , All Vehicle Body Painting Work , Front Wind Shield Glass Fitting Of Vehicle , “D” Glass Fitting Of Vehicle , Repair Vehicle Carriage ( Houda ) , Realign Of Carriage Falaka , Cushing And Repairing Of Vehicle Seat’S , Wheel Alignment Of The Vehicle , Wheel Balancing Of The Vehicle , Overhauling Ofwater Pump , Repair Of Water Pump , Repair Of Brake Air Compressor , Group ( C ) Electrical Worksbattery Cell Repairing , Battery Charging , Starter Over Oiling , Starter Repairing , Alternator Over Oiling , Alternator Repairing , All Vehicle Wiring , Headlight Fitting , Wiper Repairing , A.C Repairing , A.C Gas Filling , A.C Overhauling , Fitting The Combination Switch , Group ( D ) Mechanical Work Fitting Of Radiator , Removing And Fitting The Fuel Injection Pump , Removing And Fitting The Fuel Injector , Removing And Fitting Water Pump , Removing And Fitting Cylinder Head , Engine Half Over Hauling Work , Engine Full Over Hauling Work , Front Axle Over- Hauling Work , Rear Axle Over- Hauling Work , Removing And Fitting Clutch Plate , Gear Box Over-Hauling Work , Propeller Shaft Over-Hauling Work , Crown- Pinion Over-Hauling Work , Steering Box Over-Hauling Work , Engine Oil Change Work , Engine Tune-Up Work , Group ( E ) Electrical Spars Partsstarter Armature , Starter Field Coil Set , Starter Solenoid Switch , Starter Brush Gear , Starter Bush Set , Starter Fork , Starter Bendex , Back Side Starter Casing , Front Starter Rocker Cover , Starter Armature Plate ( Front Casing ) , Starter Body , Starter Main Wire , Alternator Rotor , Alternator Stator , Alternator Cut-Out , Alternator Rectifier , Alternator Brush Set , Alternator Bearing , Alternator Upper Cover , Alternator Body , Alternator Setting Bolt , Alternator Pully , Alternator Foundation , Alternator Foundation Bolt , Wiper , Wiper Armature , Wiper Body , Wiper Brush Set , Wiper Brush Gear , Wiper Wheel , Wiper Arm , Wiper Bled , Wiper Mining Wheel Set , Wiper Setting Rod , Head Light Assembly ( Retail Accessories ) , Key Switch , Ignition Switch , Head Light Bulb , Head Light Button , 1141 Bulb , 67 No. Bulb , Backside Danger Light Assembly , Indicator Assembly , Brake Switch , Battery Terminal , Battery Clip , Starter Button , Pull Push Button , Horn Button , Horn , Lt Wire 4 Mm , Lt Wire 5 Mm , Lt Wire 8 Mm , Living Lamp Bulb , Press Clip , Insulation Tape , Plastic Tape , Cabin Fan , Fuse Set , Front Indicator , Mudguard Indicator , 11. Auto Electric Parts 4 St Relay 12V Make Autolek , 4 St Relay 12V Make Lucas , 4 St Relay 24V Make Autolek , 4 St Relay 24V Make Lucas , Aeb 10 Mfd 50V Capacitor , Aeb 10K Preset , Aeb 10K Volume Controller , Aeb 1176 Bulb 24V ( Single Point ) , Aeb 3 Core Cable Mint , Aeb 3 Core Wire , Aeb 3 Way Switch , Aeb Adapter 1X3.4 , Aeb Alternater Cutout Jcb Robot , Aeb Alternator 24V Lucas , Aeb Alternator Batti Holder , Aeb Alternator Bearing , Aeb Alternator Bearing Dost , Aeb Alternator Bearing Eicher , Aeb Alternator Bearing Js120 , Aeb Alternator Bearing Mjeep , Aeb Alternator Bearing Plate Lucas Maxximo , Aeb Alternator Belt Tata Mega Xl , Aeb Alternator Bolt 17 No. , Aeb Alternator Bolt Dost , Aeb Alternator Brush Dost , Aeb Alternator Coupler Tata Mega , Aeb Alternator Cut Out Mbhl , Aeb Alternator Cut Out Tata 207 , Aeb Alternator Cutout Eicher , Aeb Alternator Cutout Jcb 3Dx , Aeb Alternator Cutout Js120 , Aeb Alternator Cutout Mjeep , Aeb Alternator Fuse Mbhl , Aeb Alternator Katora Bearing , Aeb Alternator Oil Seal , Aeb Alternator Oil Seal Dost , Aeb Alternator Oil Seal Mjeep , Aeb Alternator Pipe , Aeb Alternator Pulli Tata 709 , Aeb Alternator Pully Key , Aeb Alternator Rectifire Plate Bhl , Aeb Alternator Rectifire Plate Eicher 3025 , Aeb Alternator Rectifire Plate Tata Mega , Aeb Alternator Repairing Bhl 3Dx , Aeb Alternator Repairing Eicher 1075 , Aeb Alternator Repairing Js120 , Aeb Alternator Repairing Mbhl , Aeb Alternator Rotter , Aeb Alternator Rotter Mahindra Maxximo , Aeb Alternator Slip Ring , Aeb Alternator Slip Ring Js120 , Aeb Alternator Slip Ring Mjeep , Aeb Alternator Stator Coil Js120 , Aeb Alternator Stator Soldering , Aeb Alternator Thhiya Tata Mega , Aeb Alternetor Brush Holder Screw A / L Comet , Aeb Altinator Belt Maxximo , Aeb Altinator Cutout , Aeb Altinator Cutout Dost , Aeb Altinator Cutout Eicher 1075 , Aeb Altinator Cutout Lucas Maxximo , Aeb Altinator Cutout Mint , Aeb Altinator Cutout Tata Ace , Aeb Altinator Katora Eicher 1075 , Aeb Altinator Oil Seal Eicher 1075 , Aeb Altinator Quil Mahindra Jeep , Aeb Altinator Repairing Dost , Aeb Altinator Repairing Mahindra Jeep , Aeb Altinator Rotter Bhl , Aeb Altinator Starter , Aeb Altinator Stator Coil Eicher 1075 , Aeb Altinator Tensioner Maxximo , Aeb Altrnator Rotter Seal , Aeb Ampere Meter ( 50X50 ) Small Ashok L / L Comet , Aeb Ampere Meter 24V ( 30-30 ) Js200 , Aeb Ampere Meter 30X30 Jeep , Aeb Armature , Aeb Armature ( Comstar ) Mint , Aeb Armature Bhl Jcb 3Dx , Aeb Armature Combitator , Aeb Armature Combitator 608 Lucas , Aeb Armature Cut Mjeep , Aeb Armature Cut Polish Tata Mega Xl , Aeb Armature Eicher 3025 , Aeb Armature Face Cut Mjeep , Aeb Armature Face Cut Tata 709 , Aeb Armature Face Cut Tata Di ( Old ) , Aeb Armature Js120 , Aeb Armature L&T Case , Aeb Armature Lucas Mega , Aeb Armature Nut Kit , Aeb Armature Rewinding , Aeb Armature Soldering , Aeb Batter Transmitter Innova , Aeb Battery Exide Deen 60 , Aeb Bendex ( Comstar ) Mint , Aeb Bendex Bosch Tata 207 , Aeb Bendex Eicher 3025 , Aeb Bendex Fitting Maxximo , Aeb Bendex Js30 , Aeb Bendex Kit Mahindra Maxximo , Aeb Bendex Lntbh , Aeb Bendex Lock Fitting , Aeb Bendex Lock Kit , Aeb Bendex Lock Kit Mahindra Maxximo , Aeb Bendex Lock Mahindra Maxximo , Aeb Bendex Lucas 24 V Js200 , Aeb Bendex Lucas Mbhl , Aeb Bendex Lucas Mega , Aeb Bendex Mahindra Tractor , Aeb Bendex Robot Vectra , Aeb Brush Bosch Mbhl , Aeb Brush Lucas Mahindra Tractor , Aeb Brush Mahindra Maxximo , Aeb Brush Mint , Aeb Brush Plate , Aeb Brush Plate 1613 , Aeb Brush Plate Bhl Jcb , Aeb Brush Plate Bolt Mega , Aeb Brush Plate Comstar Mint , Aeb Brush Plate Eicher 2016 , Aeb Brush Plate Js30 , Aeb Brush Plate L&T Case , Aeb Brush Plate Lntbh , Aeb Brush Plate Lucas Eicher 2016 , Aeb Brush Plate Lucas Mega , Aeb Brush Plate Mahindra Bolero , Aeb Brush Plate Mbhl , Aeb Brush Plate Mint Lucas , Aeb Brush Plate Tata Ace , Aeb Brush Robot Vectra , Aeb Brush Set Eicher 2016 , Aeb Brush Set Eicher 3025 , Aeb Brush Set Js120 , Aeb Brush Set Lntbh , Aeb Brush Set Lucas Eicher 2016 , Aeb Brush Ttractr , Aeb Bulb 1016 , Aeb Bulb 2441 , Aeb Bulb 67 No. , Aeb Bush Making Of Armature , Aeb Cabin Bulb Jeep Thar , Aeb Catcher , Aeb Chock Wire Eicher , Aeb Coil Resistor ( 5W ) , Aeb Combination Switch Bhl , Aeb Combination Switch Mjeep Thar , Aeb Combination Switch Tata Mega , Aeb Common Rail Coupler Mega , Aeb Common Rail Maxximo , Aeb Commonrail Servicing Dost , Aeb Condensor , Aeb Contact Patti , Aeb Cut In Armature , Aeb Diaphragm , Aeb Diode ( It 55258 6A02 ) , Aeb Door Indicator ( Lhs ) Eicher 2016 , Aeb Earthing Wire , Aeb Egt & Katora Complete Lucas Mega , Aeb Egt Bearing , Aeb Egt Bearing Tata 207 Di , Aeb Egt Bendex Fitting Eicher 1095 , Aeb Egt Bendex Fitting Maxximo , Aeb Egt Complete , Aeb Egt Complete Jeep Thar , Aeb Egt Complete Mahindra Bolero , Aeb Egt Complete Mint , Aeb Egt Complete Tata 207 , Aeb Egt Gear , Aeb Egt Gear Maxximo , Aeb Egt Gear Mega , Aeb Egt Katora Dost , Aeb Egt Katora Mahindra Bolero , Aeb Egt Katora Mint , Aeb Egt Lock ( Chand Wali ) Mint , Aeb Egt Lock Katori Fitting Eicher 1095 , Aeb Engine Starter Relay , Aeb Est Comstar Mint , Aeb Fan Bolt Robot , Aeb Field Body Complete Js120 , Aeb Field Body Eicher Terra 16 , Aeb Field Bolt Lift Mahindra Maxxmo , Aeb Field Bolt Soldering , Aeb Field Coil Eicher 2016 , Aeb Field Coil Fitting Jeep , Aeb Field Coil Jsb 3Dx , Aeb Field Coil Lucas Eicher 2016 , Aeb Field Coil Soldering , Aeb Field Coil Taping Cargo , Aeb Field Coil Ttractr , Aeb Field Wire Soldering , Aeb Filament Patta , Aeb Front Indicatortata 407 , Aeb Front Indicator ( Lhs ) , Aeb Front Indicator ( Lhs ) Eicher Terra 16 , Aeb Front Indicator ( Lhs ) Tata 207 , Aeb Front Indicator ( Rhs ) Mjeep , Aeb Front Indicator Cover Mjeep , Aeb Front Indicator Lhs+Rhs Eicher 10.75 , Aeb Fuse 05 Amp , Aeb Fuse 10 Amp , Aeb Fuse 15 Amp , Aeb Fuse 20 Amp , Aeb Fuse 250 Amp , Aeb Fuse 60 Amp , Aeb Fuse 80 Amp , Aeb Head Light ( Lhs ) Eicher Terra 16 , Aeb Head Light ( Lhs ) Mahindra Jeep Thar , Aeb Head Light Bajel Lhs , Aeb Head Light Bejal Eicher Terra16 , Aeb Head Light Dost , Aeb Head Light Eicher , Aeb Head Light Mahindra Supro , Aeb Head Light Maxximo , Aeb Head Light Mega , Aeb Head Light Ring Square Eicher 1075 , Aeb Head Light Tata 207 , Aeb Headlight Beam With Ring , Aeb Headlight Beem Ring , Aeb Headlight Cover , Aeb Headlight Cover ( Black ) Eicher Terra16 , Aeb Headlight Mahindra Backhoeloader , Aeb Headlight Mahindra Bolero Lhs+Rhs , Aeb Headlight Set Complete With Cover & Bulb , Aeb Heat Sink Paste , Aeb Heater Plug , Aeb Heater Plug Tata Ace , Aeb Hosing Bearing Eicher 1095 , Aeb Hosing Bearing Maxximo , Aeb Hosing Bolt Ashok Leyland , Aeb Hour Meter Digital , Aeb Hydro Meter , Aeb Indicator Bulb 1167 Bhl , Aeb Js200 16Mm Top , Aeb Led Bulb 1612 , Aeb Lift Cable ( 3-Core ) , Aeb Lift Motor Armature Face Cut Tata Mega Xl , Aeb Lift Motor Armature Soldering Mega Xl , Aeb Lift Motor Bearing Tata Ace , Aeb Lift Motor Field Coil Repairing Tata Mega Xl , Aeb Lift Motor Field Wire Dost , Aeb Lift Motor Repairing Tata Mint , Aeb Lift Solenoid Coil , Aeb Lift Solenoid Relay , Aeb Lift Solenoid Switch Dost , Aeb Lift Solenoid Valve Mega , Aeb Lift Solenoid Valve Mint , Aeb Lift Solenoid Valve Supro , Aeb Lift Switch Box Dost , Aeb Lift Switch Box Mega , Aeb Lock Katori , Aeb Lock Katori Bhl Jcb 3Dx , Aeb Lock Katori Lucas Mega , Aeb Lock Katori Lucas Mint , Aeb Lock Kit Lucas Maxximo , Aeb Lugs Fitting In Battery Wire , Aeb Lugs Soldering In Battery Wire , Aeb Magnet Coil Riksha , Aeb Main Coil Fitting Tata 709 , Aeb Main Line Switch , Aeb Main Line Switch Bhl , Aeb Main Line Switch Cargo , Aeb Main Line Switch Eicher 1095 , Aeb Main Line Switch Jeep Pijo540 , Aeb Main Line Switch Mahindra Maxximo , Aeb Main Line Switch Mega , Aeb Main Line Switch Mjeep , Aeb Main Line Switch Roller , Aeb Mastech Digital Meter , Aeb Mcb Roller , Aeb Mega Brush Plate , Aeb Mega Self Katora Lucas , Aeb Meter Bult Holder 709 , Aeb Meter Holder Massey Tractor , Aeb Micro Relay , Aeb Micro Relay Coupler Mega Xl , Aeb Micro Relay Holder , Aeb Milometer Coupler , Aeb Milometer Coupler Eicher Terra16 , Aeb Milometer Sensor , Aeb Milometer Sensor Maxximo , Aeb Mini Fuse 05 Amp , Aeb Mini Fuse 10 Amp , Aeb Mini Fuse 15 Amp , Aeb Mini Fuse 20 Amp , Aeb Mini Fuse 25 Amp , Aeb Mini Halogen Bulb Bhl , Aeb Mini Helogen , Aeb M-Seal ( Big ) , Aeb M-Seal ( Small ) , Aeb Mudguard Indicator Jeep Thar , Aeb New Alternator Bosch , Aeb New Alternator Ex100 Hitachi , Aeb New Alternator Lucas Maxximo , Aeb New Self 12V Tata Ace , Aeb New Self Bosch Eicher 1110 , Aeb New Self Eicher 20.16 , Aeb New Self Lucas Roller , Aeb New Self Lucas Tata Ace , Aeb New Self Mjeep , Aeb New Self Riksha , Aeb Number Plate Light Mahindra Jeep , Aeb On / Off Switch , Aeb Panel Switch Dost , Aeb Pendrive 16Gb , Aeb Pilot Bearing Tata Mega , Aeb Rear Indicator ( Lhs+Rhs ) Mjeep , Aeb Rectifier Plate Cargo , Aeb Rectifier Plate Dost , Aeb Rectifier Plate Jcb 3Dx , Aeb Rectifier Plate Mahindra Jeep , Aeb Rectifier Plate Maxximo , Aeb Rectifier Plate Mega , Aeb Rectifier Plate Tata Ace , Aeb Screw 1 / 2 , Aeb Search Light Bulb 24V , Aeb Search Light Js30 , Aeb Self 4St Relay ( 24V ) , Aeb Self Armature ( Lucas ) Riksha Alpha , Aeb Self Armature 1613 , Aeb Self Armature Bosch Eicher Terra 16 , Aeb Self Armature Bosch Lntbh , Aeb Self Armature Eicher 2016 , Aeb Self Armature Lucas Eicher 2016 , Aeb Self Armature Lucas Mint , Aeb Self Armature Mahindra Bolero , Aeb Self Armature Mahindra Tractor , Aeb Self Armature Tata 207 Di , Aeb Self Armature Ttractr , Aeb Self Bendex Bosch , Aeb Self Bendex Eicher 2016 , Aeb Self Bendex Jcb 3Dx , Aeb Self Bendex Lucas Mjeep , Aeb Self Bendex Mahindra Bolero , Aeb Self Bendex Mico Eicher 2016 , Aeb Self Bendex Mint Lucas , Aeb Self Bendex Tata 207 Di , Aeb Self Body , Aeb Self Body Stud Leyland Cargo , Aeb Self Body Stud Long Tata 1210 , Aeb Self Bolt Riksha , Aeb Self Brush Bhl , Aeb Self Brush Eicher Terra 16 , Aeb Self Brush Holder Riksha , Aeb Self Brush Mahindra Jayo , Aeb Self Brush Plate Eicher Terra 16 , Aeb Self Brush Plate Jeep , Aeb Self Brush Plate Riksha , Aeb Self Brush Plate Riksha Alpha , Aeb Self Brush Plate Tata 207 Di , Aeb Self Brush Riksha , Aeb Self Brush Tata Ace , Aeb Self Center Plate Tata 709 , Aeb Self Coupling Tata 1210 , Aeb Self Egt Eicher 1075 , Aeb Self Egt Gear Dost , Aeb Self Egt Katora , Aeb Self Egt Lucas Mega , Aeb Self Egt Mint , Aeb Self Field Bolt Soldering , Aeb Self Field Coil Lucas 24V 1613 , Aeb Self Hole Topping , Aeb Self Hosing Bosch Tata 207 Di , Aeb Self Hosing Comstar , Aeb Self Hosing Lucas , Aeb Self Hosing Lucas Jcb 3Dx , Aeb Self Hosing Lucas Tata Mega , Aeb Self Hosing Mahindra Bolero , Aeb Self Hosing Stud Remove , Aeb Self Hozing Bearing , Aeb Self Opening Fitting Tata 709 , Aeb Self Scew 4 Point ( 3 / 4 ) , Aeb Self Screw 1 , Aeb Self Screw 3 / 4 4 Point , Aeb Self Screw Beat , Aeb Self Solenoid Switch Eicher Terra 16 , Aeb Self Solenoid Switch Js120 , Aeb Self Solenoid Switch Lucas Eicher 1110 Pro , Aeb Self Stud Mega Xl , Aeb Self Stud Woisher , Aeb Self Top Katora , Aeb Self Top Plate Dost , Aeb Sholdering Iron , Aeb Soldering Wire , Aeb Soldering Wire Oswal 250 Gm , Aeb Solenoid Coil Eicher 50.25 , Aeb Solenoid Coil Js120 , Aeb Solenoid Quil Dost , Aeb Solenoid Quil Maxximo , Aeb Solenoid Relay 24V Tata 1613 , Aeb Solenoid Relay Ashok L / L Comet , Aeb Solenoid Screw Eicher 1110 Pro , Aeb Solenoid Switch ( Comstar ) Mint , Aeb Solenoid Switch Bhl , Aeb Solenoid Switch Coupler , Aeb Solenoid Switch Eicher 2016 , Aeb Solenoid Switch Eicher 3025 , Aeb Solenoid Switch Hmt Tractor , Aeb Solenoid Switch Js30 , Aeb Solenoid Switch Lock Patti Tata 207 , Aeb Solenoid Switch Lucas Mega , Aeb Solenoid Switch Lucas Mint , Aeb Solenoid Switch Mahindra Bolero , Aeb Solenoid Switch Mahindra Maxximo , Aeb Solenoid Switch Mbhl , Aeb Solenoid Switch Mico Eicher 2016 , Aeb Solenoid Switch Mjeep , Aeb Solenoid Switch Mtractor 475 Di , Aeb Solenoid Switch Robot Victra , Aeb Solenoid Switch Screw Dost , Aeb Solenoid Switch Screw Lucas Mega , Aeb Solenoid Switch Screw Lucas Mint , Aeb Solenoid Switch Tata 207 , Aeb Solenoid Switch Tata 207 Di , Aeb Solenoid Valve Dost , Aeb Solenoid Valve Mahindra Maxximo , Aeb Speaker Wire , Aeb Spindal Quarter Pin , Aeb Startin Relay Maxximo , Aeb Starting Switch Jcb 3Dx , Aeb Stator Coil , Aeb Sturd Mint , Aeb Tail Light ( 3 Chamber ) , Aeb Tail Light Assy. ( 03 Chamber ) Eicher 1059 , Aeb Tail Light Bhl , Aeb Tail Light Cover , Aeb Tail Light Mahindra Bolero , Aeb Tda 5200 Transistor , Aeb Temperature Meter , Aeb Temperature Tee ( Big ) , Aeb Temperature Tee ( Small ) , Aeb Temperature Tee Mahindra Supro , Aeb Temperature Tee Removing , Aeb Tempreature Coupler Maxximo , Aeb Tempreature Tee Coupler Mega , Aeb Tempreature Tee Dost , Aeb Tempreature Tee Mega , Aeb Tie Rod Quarter Pin , Aeb Top Katora Mint , Aeb Transfarmer 12012 Js120 , Aeb Transformer Ahuja ( Op 4202 ) , Aeb Transformer Repairing , Aeb Tube Light , Aeb Tube Light Complete L & T Case , Aeb Usb Board , Aeb Usb Socket , Aeb Wiper Blade Complete Bhl Jcb 3Dx , Aeb Wiper Machine Armature Rewinding Bhl Jcb 3Dx , Aeb Wiper Machine Bolt Bhl Jcb 3Dx , Aeb Wiper Machine Woisher Bhl Jcb 3Dx , Aeb Wiper Motor Repairing Bhl Jcb 3Dx , Aeb Wire Rope 8Mm , Aeb Zoric Spray , Alternatir Bearing Plate 407 Lucas , Alternator Assy. 407 Make Autolek , Alternator Assy. 407 Make Lucas , Alternator Assy. Cargo 909 L / L. Make Mico , Alternator Assy. Leyland Cometlucas , Alternator Assy. Leyland Comet Autolek , Alternator Bearing 6203 Maruti Make Skf , Alternator Bearing 6304 Leyland Skf , Alternator Brush Cargo 909 L / L. Mico , Alternator Brush Holder 407 .Make Autolek , Alternator Brush Holder 407 Make Lucas , Alternator Brush Holder Leyland Make Lucas , Alternator Brush Holder Maruti Lucas , Alternator Brush Leyland Comet Lucas , Alternator Brush Leyland Comet Make Autolek , Alternator Brush Tata 407 Lucas , Alternator Brush Tata 407 Make Autolek , Alternator Cutout 407 Make Autolek , Alternator Cutout 407 Make Lucas , Alternator Cutout Cargo 909 Bosch , Alternator Cutout Leyland Make Lucas , Alternator Cutout Maruti Make Lucas , Alternator Rectifire Plate 407 Make Autolek , Alternator Rectifire Plate 407 Make Lucas , Alternator Rottor 407 Make Autolek , Alternator Rottor 407 Make Lucas , Alternator Rottor Cargo 909 Make Bosch , Alternator Rottor Leyland Make Lucas , Alternator Rottor Maruti Make Lucas , Alternator Starter Quil 407 Make Autolek , Alternator Starter Quil 407 Make Lucas , Alternator Stator Coil Leyland Make Lucas , Alternator Stator Coil Maruti Lucas , Bearing 6303-Zz Make Ngk , Bearing 6303-Zz Make Skf , Breake Light Switch Make Jcb , Brush Holder Complete Make Autolek , Brush Holder Complete Make Lucas , Bulb 1141 Make Power , Cab Harness Make Jcb , Cabin Light Make Lumax , Combination Switch 12 V Jeep Mahindra , Combination Switch 12 V.Make Lumax , Combination Switch 12 V.Make Minda , Combination Switch 24 V. Make Minda , Combination Switch 24 V.Make Lumax , Combination Switch Double Rod 709 / 407 Lumax , Combination Switch Double Rod 709 / 407 Make Minda , Coper Wire 10Mm Make Finolex , Coper Wire 10Mm Make Shanco , Coper Wire 4 Mm Make Finolex , Coper Wire 4 Mm Make Shanco , Coper Wire 5Mmfinolex , Coper Wire 5Mm Make Shanco , Coper Wire 6Mm Make Finolex , Coper Wire 6Mm Make Shanco , Coper Wire 7Mm Make Finolex , Coper Wire 7Mm Make Shanco , Coper Wire 8Mm Make Finolex , Coper Wire 8Mm Make Shanco , Flasher Unit 12 V Make Hella , Flasher Unit 12 V Make Pmp , Flasher Unit 24Vhella , Flasher Unit 24V Make Pmp , Focus Light Switch Make Jcb , Forward / Reverse Dump Relay Harness Make Jcb , Front Indicator & Head Lamp Mtg. Left Hand Side Make Jcb , Front Indicator & Head Lamp Mtg. Right H. S.Make Jcb , Fuse Box Make Hella , Fuse Box Make Shanco , Fuse Gole Wale Make Aspa , Fuse Gole Wale Make Shanco , Halozen Bulb 12 V. Tata Make Philips , Halozen Bulb 12 V.Tata Make Halonix , Halozen Bulb 24 V. Make Halonix , Halozen Bulb 24 V. Make Philips , Head Lamp Make Jcb , Head Light Bulb 12 V. Make Halonix , Head Light Bulb 12 V. Make Philips , Head Light Bulb 24 V. Make Philips , Head Light Bulb 24 V.Mkae Halonix , Head Light Cargo 909 L / L. Make Lumax , Head Light Cargo 909 L / L.Make Aitopal , Head Light Clip Make Shanco , Head Light Cutout Make Hella , Head Light Cutout Make Minda , Head Light Eicher Make Autopal , Head Light Eicher Make Lumax , Head Light Holder Make Minda , Head Light Holder Make Shanco , Head Light Ley. Comet Biasan & Jeeplumax , Head Light Leyland Comet Biasan & Jeep Make Minda , Head Light Reley Makehella , Head Light Reley Make Shanco , Head Light Switch L Type Make Minda , Head Light Switch L Type Make Nulite , Head Light Tata 1210 Make Autopal , Head Light Tata 1210 Make Lumax , Head Light Tata 709 Make Autopal , Head Light Tata 709 Make Lumax , Horn 12 V. Make Autolek , Horn 12 V. Make Minda , Horn 24 V. Make Autolek , Horn 24 V. Make Minda , Horn Button Of Steel Make Minda , Horn Rile 12 V Make Hella , Horn Rile 12 V Make Minda , Horn Switch Make Kkk , Horn Switch Make Minda , Hour Meter Make Jcb , Indicator Front 709, 1210, Cargo, Liteman , Indicator Front 709, 1210, Cargo, Minda , Indicator Front 709, 1210, Cargo, Leyland Make Hella , Ingnition Switch Make Jcb , Instrument Cluster Make Jcb , Instrument Panel Make Jcb , Insulation Tape Make Shanco , Insulation Tape Make Stilgrip , Main Line Switch Jeep Make Minda , Main Line Switch Tata Make Minda , Meter Bulb 12 V Make Minda , Meter Bulb 12 V Make Shanco , Panel Harness Make Jcb , Panel Light Switch Make Jcb , Pinion Bush 12 V Make Banara , Pinion Bush 12 V Make Gmk , Piyano Switch Make Minda , Piyano Switch Make Shanco , Pressure Transducer Make Jcb , Push Pull Switch Make Minda , Relay Dump Make Jcb , Relay Forward / Reverse Make Jcb , Relay, Start Make Jcb , Saloind Switch Cargo 909 L / L.Mico , Saloind Switch Eicher N / M Make Mico , Saloind Switch Eicher O / M Make Mitsubishi , Saloind Switch L / L Comet & Biasanlucas , Saloind Switch Leyland Comet & Biasan Make Autolek , Saloind Switch Tata 1210 Make Autolek , Saloind Switch Tata 1210 Make Lucas , Saloind Switch Tata 709 & 608 Make Autolek , Saloind Switch Tata 709 & 608 Make Lucas , Salonoid Switch Jeep Make Autolek , Salonoid Switch Jeep Make Lucas , Salonoid Switch Mahindra Maximo Bosch , Salonoid Switch Maximo Make Lucas , Search Light ( Round ) Make Lumax , Self 1210 Make Autolek , Self 1210 Make Lucas , Self 407 N / M Makeautolek , Self 407 N / M Make Lucas , Self 709, 608 Make Autolek , Self 709, 608 Make Lucas , Self Armature Mahindra Maximo Bosch , Self Armature Maximo Make Lucas , Self Armeture Ambasder Make Autolek , Self Armeture Ambasder Make Lucas , Self Armeture Cargo 909 L / L. Mico , Self Armeture Eichern / M Make Mico , Self Armeture Eicher O / Mmake Mitsubishi , Self Armeture Jeep Di Make Autolek , Self Armeture Jeep Di Make Lucas , Self Armeture Leyland Comet Lucas , Self Armeture Leyland Comet Make Autolek , Self Armeture Tata 1210 Make Autolek , Self Armeture Tata 1210 Make Lucas , Self Armeture Tata 709 & 608 Lucas , Self Armeture Tata 709 & 608 Make Autolek , Self Aux Coil 12 V.Make Autolek , Self Aux Coil 12 V.Make Lucas , Self Bendex Ambasder Make Autolek , Self Bendex Ambasder Make Lucas , Self Bendex Cargo 909 L / L. Make Autolek , Self Bendex Cargo 909 L / L. Make Lucas , Self Bendex Eichern / M Make Mico , Self Bendex Eicher O / M Make Mitsubishi , Self Bendex Jeep Di Make Autolek , Self Bendex Jeep Di Make Lucas , Self Bendex Leyland Comet Make Autolek , Self Bendex Leyland Comet Make Lucas , Self Bendex Maximo Make Lucas , Self Bendex Maxximo Make Bosch , Self Bendex Tata 1210 Make Autolek , Self Bendex Tata 1210 Make Lucas , Self Bendex Tata 709 & 608 Make Autolek , Self Bendex Tata 709 & 608 Make Lucas , Self Brush Ambasder Make Autolek , Self Brush Ambasder Make Lucas , Self Brush Cargo 909 L / L. Make Lucas , Self Brush Eichern / M Make Mico , Self Brush Eicher O / Mmake Mitsubishi , Self Brush Jeep Di Make Autolek , Self Brush Jeep Di Make Lucas , Self Brush Ley. Comet & Biasan Lucas , Self Brush Leyland Comet & Biasanautolek , Self Brush Tata 1210 Make Autolek , Self Brush Tata 1210 Make Lucas , Self Brush Tata 709 & 608 Make Autolek , Self Brush Tata 709 & 608 Make Lucas , Self Bush 031, 237, 649, 888, 1089, 1090, 1110, 471, 430 Make Msp / Star , Self Clutch Assembly All Models Lucas , Self Clutch Assembly All Models Make Autolek , Self Connect Point Comet Make Autolek , Self Connect Point Comet Make Lucas , Self Connect Point Jcb Make Autolek , Self Connect Point Jcb Make Lucas , Self Connect Point Tata Make Autolek , Self Connect Point Tata Make Lucas , Self E.G.T. Complete Leyland Autolek , Self E.G.T. Complete Mahindra Maximo Lucas , Self E.G.T. Complete Mahindra Maximo Make Bosch , Self Eicher O / M Make Mitsubishi , Self Field Body Complete Mahindra Maximo Make Bosch , Self Field Body Complete Maximo Make Lucas , Self Field Bolt 608 Make Autolek , Self Field Bolt 608 Make Lucas , Self Field Bolt Kit Make Autolek , Self Field Bolt Kit Make Lucas , Self Field Coil 1210.709.407 Lucas , Self Field Coil 1210.709.407 Make Autolek , Self Field Wire Cargo Make Lucas , Self Fild Body Cargo 909 L / L. Make Mico , Self Fild Body Eicher O / M Make Mitsubishi , Self Fild Body L / L Comet & Biasan Autolek , Self Fild Body Leyland Comet & Biasan Make Lucas , Self Fild Body Tata 1210 Make Autolek , Self Fild Body Tata 1210 Make Lucas , Self Fild Body Tata 709 & 608 Make Autolek , Self Fild Body Tata 709 & 608 Make Lucas , Self Hosing Ambasder Make Autolek , Self Hosing Ambasder Make Lucas , Self Hosing Cargo 909 L / L. Make Lucas , Self Hosing Eicher O / M Make Mitsubishi , Self Hosing Jeep Di Make Autolek , Self Hosing Jeep Di Make Lucas , Self Hosing Leyland Comet & Biasan Autolek , Self Hosing Leyland Comet & Biasan Lucas , Self Hosing Maximo Make Bosch , Self Hosing Maximo Make Lucas , Self Hosing Tata 1210 Make Autolek , Self Hosing Tata 1210 Make Lucas , Self Hosing Tata 709 & 608 Make Autolek , Self Hosing Tata 709 & 608 Make Lucas , Self Jcb Make Autolek , Self Jcb Make Lucas , Self Jeep Make Lucas , Self Jeep Make Mico , Self Katora Maximo Make Bosch , Self Katora Maximo Make Lucas , Self Leyland Cargo Make Mico , Self Leyland Comet Biason 24 V.Mico , Self Leyland Comet Biason 24 V. Make Lucas , Self Mahindra Maximo Make Bosch , Self Maxximo Make Lucas , Self Pinion Bush Cargo 909 L / L.Banara , Self Pinion Bush Cargo 909 L / L.Gmk , Self Pinion Bush Eicher O / Mbanara , Self Pinion Bush Eicher O / Mgmk , Self Pinion Bush Leyland Cometgmk , Self Pinion Bush Leyland Comet Banara , Self Pinion Bush Tata 1210Banara , Self Pinion Bush Tata 1210Gmk , Self Pinion Ley.Comet & Biasan Lucas , Self Pinion Leyland Comet & Biasanautolek , Self Pinion Tata 1210 Make Autolek , Self Pinion Tata 1210 Make Lucas , Self Plenger Comet Make Autolek , Self Plenger Comet Make Lucas , Self Rocker Plate Ambasder Make Autolek , Self Rocker Plate Ambasder Make Lucas , Self Rocker Plate Cargo 909 L / L.Mico , Self Rocker Plate Complete Maximo Bosch , Self Rocker Plate Complete Maximo Make Lucas , Self Rocker Plate Eicher O / Mmake Mitsubishi , Self Rocker Plate Jeep Di Make Autolek , Self Rocker Plate Jeep Di Make Lucas , Self Rocker Plate Leyland Comet Lucas , Self Rocker Plate Leyland Cometautolek , Self Rocker Plate Tata 1210Autolek , Self Rocker Plate Tata 1210Lucas , Self Rocker Plate Tata 709 & 609Autolek , Self Rocker Plate Tata 709 & 609 Make Lucas , Side Glass Pvc ( All Vehicles ) Marshal , Side Glass Steel ( All Vehicles ) Somex , Siren Amplifier 12V Make Ahuja , Siren Amplifier Mic 12V Make Ahuja , Siren Bhonga 12 V Make Ahuja , Start Relay Make Jcb , Starter Push Button 24 V Make Camel , Starter Push Button 24 V Make Minda , Starter Push Button Make Camel , Starter Push Button Make Minda , Steering Ignition Switch 709 Make Minda , Switch Column Make Jcb , Switch Reverse Horn Make Jcb , Tale Lamp Assy. 4 Chamber Make Hifi , Tale Lamp Assy. 4 Chamber Make Liteman , Tape Roll Non-Sticky Make Shanco , Tape Roll Non-Sticky Make Solar , Toggle Switch Make Camel , Toggle Switch Make Minda , Tub Light Make Jcb , Water Temp Sensor Make Jcb , Wiperarm Tata 407 Make Syndicate , Wiper Arm Cargomake Syndicate , Wiper Arm Eichermake Syndicate , Wiper Arm Jeep Make Syndicate , Wiper Arm Leyland Make Syndicate , Wiper Arm Tata 1210 Make Syndicate , Wiper Arm Tata 709 Make Syndicate , Wiper Bladejeepmake Syndicate , Wiper Bladetata 407 Make Syndicate , Wiper Blade Cargomake Syndicate , Wiper Blade Eicher Make Syndicate , Wiper Blade Leyland Make Syndicate , Wiper Blade Tata 1210 Make Syndicate , Wiper Blade Tata 709 Make Syndicate , Wiper Machineeicher Make Lucas , Wiper Machine Armature Cargolucas , Wiper Machine Armature Eicherlucas , Wiper Machine Armature Jeeplucas , Wiper Machine Armature Leyandlucas , Wiper Machine Armature Tata 1210Lucas , Wiper Machine Armature Tata 407Lucas , Wiper Machine Armature Tata 709Lucas , Wiper Machine Cargo Make Lucas , Wiper Machine Jeepmake Lucas , Wiper Machine Lelyandmake Lucas , Wiper Machine Tata 1210 Make Lucas , Wiper Machine Tata 407 Make Lucas , Wiper Machine Tata 709 Make Lucas , Wiper Motor Make Lucas , Wiring Clip 18 No. Make Shanco , Wiring Clip 2A No. Make Shanco , Wiring Clip 4 No. Make Shanco , Wiring Clip 5 No. Make Shanco , Wiring Loom Cop. Ambasder Nova Dlxshanco , Wiring Loom Cop. Ambasder Nova Dlx Finolex , Wiring Loom Cop. Cargo 909 L / L. Finolex , Wiring Loom Cop. Cargo 909 L / L. Shanco , Wiring Loom Cop. Dcm Make Shanco , Wiring Loom Cop. Dcm Makefinolex , Wiring Loom Cop. Eicher O / Mfinolex , Wiring Loom Cop. Eicher O / M Shanco , Wiring Loom Cop. Jeep Difinolex , Wiring Loom Cop. Jeep Dishanco , Wiring Loom Cop. Ley Comet & Biasanshanco , Wiring Loom Cop. Leyland Comet & Biasanfinolex , Wiring Loom Cop. Tata 1210 Make Finolex , Wiring Loom Cop. Tata 1210 Make Shanco , Wiring Loom Cop. Tata 709 Make Finolex , Wiring Loom Cop. Tata 709 Make Shanco , Working Light ( Search Light ) Jcb , Working Light Switch Make Jcb , 12. Oil Paint 10 Mm / 3 Soot 2 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 3 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 4 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 5 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 6 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 7 Bolt With Nut Make Tvs , 10 Mm / 3 Soot 8 Bolt With Nut Make Tvs , 10 Mm / 3Soot 1Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 1 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 2 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 3 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 4 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 5 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 6 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 7 Bolt With Nut Make Tvs , 12 Mm / 3.5 Soot 8 Bolt With Nut Make Tvs , 14 Mm / 0.5 1 Bolt With Nut Make Tvs , 14 Mm / 0.5 2 Bolt With Nut Make Tvs , 14 Mm / 0.5 3 Bolt With Nut Make Tvs , 14 Mm / 0.5 4 Bolt With Nut Make Tvs , 14 Mm / 0.5 6 Bolt With Nut Make Tvs , 14 Mm / 0.5 7 Bolt With Nut Make Tvs , 14 Mm / 0.5 8 Bolt With Nut Make Tvs , 14 Mm / 0.5 Inch5 Bolt With Nut Make Tvs , 2.1 / 2 Soot 2 Bolt With Nut Make Tvs , 3 Soot 2.1 / 2Bolt With Nut Make Tvs , 3 / 41 Bolt With Nut Make Tvs , 3 / 42 Bolt With Nut Make Tvs , 3 / 43 Bolt With Nut Make Tvs , 3 / 44 Bolt With Nut Make Tvs , 3 / 45 Bolt With Nut Make Tvs , 3 / 46 Bolt With Nut Make Tvs , 3 / 47 Bolt With Nut Make Tvs , 3 / 48 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 4 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 5 Bolt With Nut Maketvs , 6 Mm / 2 Soot 6 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 7 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 8 Bolt With Nut Make Tvs , 6 Mm / 2 Soot 1 Bolt With Nut Tvs , 6 Mm / 2 Soot 2 Bolt With Nut Tvs , 6 Mm / 2 Soot 3 Bolt With Nut Tvs , 6 X 25 Mm / 1 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 1 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 2 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 2 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 3 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 3 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 4 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 4 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 5 Bolt With Nut Tvs , 8 Mm / 2.5 Soot 5 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 6 Bolt With Nuttvs , 8 Mm / 2.5 Soot 6 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 7 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 7 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 8 Bolt With Nut Make Tvs , 8 Mm / 2.5 Soot 8 Bolt With Nut Make Tvs , Aari Patte Make Taparia , Band 1 Make B Class , Band 1.5 Make B Class , Band 1 / 2 Make B Class , Band 2 Make B Class , Band 2.5 Make B Class , Band 3 Make B Class , Band 3 / 4 Make B Class , Band 4 Make B Class , Battery Khunti Making , Bonet 1210 Make Gmi , Bonet 709 Make Gmi , Bonet Cargo Make Gmi , Bonet Leyland Make Gmi , Brass Welding Rods , Brush Taar Ka , Bumfer Cargo Make Gmi , Bumfer Dcm Make Gmi , Bumfer Eicher Make Gmi , Bumfer Leyland Make Gmi , Bumfer Tata 1210 Make Gmi , Bumfer Tata 1210 Se Make Gmi , Bumfer Tata 709 Make Gmi , Cabin L.P. Shoe Ke Left Right Pankhe , Cabin L.P. Shoe Radiator Frot With Kabje Jaali , Charging Clip , Chasis Welding Rod Ss 10 No. Make Advani , Chasis Welding Rod Ss 8 No. Make Advani , Clear Varnish Make Asian , Color Chhan Ne Ka Kapda , Cotton Waste , Cotton Waste , Diaphragm , Dico Putty , Door Heavy Parliament Kabje , Elbow 1 Make B Class , Elbow 1.5 Make B Class , Elbow 1 / 2 Make B Class , Elbow 2 Make B Class , Elbow 2.5 Make B Class , Elbow 3 Make B Class , Elbow 3 / 4 Make B Class , Elbow 4 Make B Class , G.I. Pipe 1 25 Mm Make B Class , G.I. Pipe 1.5 40 Mm Make B Class , G.I. Pipe 1 / 2 15 Mm Make B Class , G.I. Pipe 2.5 65 Mm Make B Class , G.I. Pipe 3 80 Mm Make B Class , G.I. Pipe 4 100 Mm Make B Class , G.I.Pipe 2 50 Mm Make B Class , Gas Welding Holder Make Genuine , Gas Welding Nozzle Make Genuine , Gas Welding Regulator Brass Make Genuine , Gear Oil 90 No. , H.R. Sheet All Size Make Tata , Hinch Mahindra Jeep , Hose Joint 2 , Hose Joint 3 , Hose Nipple 3 Make Arti , Hp Colour Toner 130A , Jeepfront Glass Fram Make Mahindra , Jeepmudgaurd Make Mahindra , Kabje 3 , Kabje Nut Bolt , Kunde Nakhuche , Lohe Ki Welding Rods , M.S. Agles All Size Make Tata , M.S. Beam All Size Make Tata , M.S. Channle All Sizemake Tata , M.S. Round Bar All Size Make Tata , M.S. Sheet All Sizemake National , M.S. Sqre Bar All Size Make Tata , M.S. Squre Pipe All Size Make Tata , Meta Fil Putty Make Pan , Mudguardside Tata 709 Make Gmi , Mudguard Left / Right 1210 S Model Make Gmi , Nipple 3 80 Mm12 Make B Class , Nipple 3 80 Mm18 Make B Class , Nipple 3 80 Mm4 Make B Class , Nipple 3 80 Mm6 Make B Class , Nipple 3 80 Mm7 Make B Class , Nipple 3 80 Mm8 Make B Class , Nipple 3 80 Mm9 Make B Class , Nipple 3 80 Mm 24 Make B Class , Nipple 3 80 Mm 3 Make B Class , Nipple 3 80 Mm 5 Make B Class , Nut Bolt 10 No. 1.5 Long , Nut Bolt With Woisher ( 10 No. ) , Oil Paint Aspa Black Color , Oil Paint Aspa Blue , Oil Paint Aspa Blue Color , Oil Paint Aspa Golden Yellow Color , Oil Paint Aspa Green , Oil Paint Aspa Grey Color , Oil Paint Aspa Passion Yellow Color , Oil Paint Aspa Post Office Red Color , Oil Paint Aspa Signal Red Color , Oil Paint Aspa Taxi Yellow , Oil Paint Aspa White Color , Oil Paint Black Make Asian Apcolite , Oil Paint Deep Orange Make Asian Apcolite , Oil Paint Ferozi Makeasian Apcolite , Oil Paint Golden Yellowmake Asian Apcolite , Oil Paint Oxford Blue Makeasian Apcolite , Oil Paint Post Office Red Make Asian Apcolite , Oil Paint Signal Redmakeasian Apcolite , Oil Paint Sky Blue Make Asian Apcolite , Oil Paint Smoke Grey Make Asian Apcolite , Oil Paint White Colour Make Asian Apcolite , Op 01 Ltr Naap , Op 02 Ltr Naap , Op 1.5 Soot Nut Bolt 2 , Op 1.5 Soot Woisher , Op 1 / 2 Ltr Naap , Op 10 No. Jointer , Op 10 No. Woisher , Op 14 Cutter Plate , Op 2 Soot Drill Barma , Op 2 Soot Nut Bolt 2 , Op 2 Soot Woisher , Op 2 Nut Bolt Woisher , Op 3 Soot Nut Bolt 1.5 , Op 3 Soot Nut Bolt 2 , Op 3 Soot Nut Bolt 3 , Op 3 Soot Woisher , Op 320 No. Patte , Op 4 Soot Nut Bolt 3 , Op 4 Soot Woisher , Op 4 Cutter Plate , Op 5 Cutter Plate , Op 6 Chaini , Op 6 Round Sandasi 2.5 Ft Long , Op 750 Tube Nali , Op 8 No. Nut Bolt Robot , Op 8Mm Plate Molding L / L , Op Axle 3 Ft Long , Op Banner Set Brush , Op Block Kaan Welding , Op Block Welding Tata Mint , Op Both Seat Cover Fitting , Op Brass Gas Welding Flex 100 Gm , Op Carbide , Op Carbide Tank Lid Rubber Channel , Op Catcher Patti , Op Chain 14 Guage 3 Ft , Op Chain 4Mm , Op Chitakni 4 , Op Compressure Pipe , Op Cut Job In Hub Bearing Seat , Op Cutter Machine Repairing , Op Door Kabje Eicher 1095 , Op Door Kabje Maxximo , Op Door Kabje Mega Xl , Op Door Kabje Mjeep Di , Op Door Lock L & T Case , Op Door Lock Screw 0.5 , Op Door Lock Screw 0.75 , Op Door Lock Thessi Screw With Nut , Op Door Stopper Belt Mjeep Di , Op Door Trim Mjeep Di , Op Fiber Gate Sheet 72X28 , Op Filter Paane Paate Wale , Op Flat Small Ball Ke Brush , Op Foot Board Mahindra Jeep Di , Op Front Both Seat Making Eicher 1075 , Op G.I. Nipple 2 ( Long 6 ) , Op Galvanized Cotted Chaddar 19 Guage 4Ft , Op Garden Jaali 1X1 ( Gale Wali ) , Op Gas Light Stone , Op Gas Regulator Repairing , Op Gas Welding Pipe , Op Gate Hole Drop , Op Gear Lever Welding , Op Grese , Op Grinder Patte 4 , Op Haath Thela Axle 3 Ft , Op Haath Thela Wheel , Op Haath Thela Wheel Bearing , Op Hand Gloves , Op Hole Drop Heavy ( Steel ) , Op Hydraulic Kenchi Jack Repairing , Op Joint Nipple , Op Kabje 4 , Op Kabje 5 , Op Kenchi Brass Mouth 16 , Op Kenchi Peetal Ke Mouth Wali 12 , Op Left Side Door Shockup Robot , Op Lpg Gas Tanki Filling , Op Manifold Welding , Op Marker Pen , Op Mask , Op Masking Tap , Op Ms Sheet Moulding , Op New Gas Cutter , Op Nipple , Op Nipple 2.5 , Op Nipple 32 , Op Nipple 4 , Op Nipple Opening Fitting , Op Nut Bolt 13 No. Mjeep Di , Op Nut Bolt 14 No. Mjeep Di , Op Oil Bottle , Op Oil Jhabbi Big , Op Oil Jhabbi Small , Op Outer Handle Robot , Op Paddle With Fitting , Op Paint Removal , Op Pilament Kabje , Op Plate Cutting Welding & Hole Work , Op Puncher Ke Pench 3 No , Op Raddi Paper , Op Reducer 2X3 , Op Rejimal Patti Cloth , Op Robot Bonet Lock , Op Roof Cushing Eicher 1095 , Op Round Sable Brush 12 No , Op Sandasi 8 , Op Simple Ply 9Mm 4X8 Ft , Op Spray Color Gun ( Pilot ) , Op Stool Box ( Taxi Yellow ) , Op Tailgatekabje Mjeep Di , Op Tower Patti , Op Tube Valve , Op Vaasu Lock , Op Valve Die Big , Op Valve Pvc 4 , Op Water Proof Checker Ply 16 Mm 4X8 Ft , Op Water Proof Ply 18 Mm 4X8 Ft , Op Wheel Nut Bolt , Op Wheel Woisher , Op Woisher 19 No. Js200 , Op Woisher 4 Soot , Op Woisher Spring 13 No Bolt Mjeep Di , Op Woisher Spring 14 No Bolt Mjeep Di , Oxygen Cylinder Feeling , Paint Brush 2 , Paint Brush 3 , Paint Brush 4 , Paint Brush 5 , Pipejointer 10Mm , Pipejointer 12Mm , Polyester Putty , Radiator Assy.Model Cargo 909 , Radiator Assy.Model Dcm , Radiator Assy.Model Eicher , Radiator Assy.Model Jcb , Radiator Assy.Model Jeep , Radiator Assy.Model Jumbo 1612 , Radiator Assy.Model Leyland , Radiator Assy.Model Tata 1210 , Radiator Assy.Model Tata 407 , Radiator Assy.Model Tata 709 , Radiator Assy.Model Tractor , Radiator Bottomex With Labourdcm , Radiator Bottomex With Laboureicher , Radiator Bottomex With Labourjumbo 1612 , Radiator Bottomex With Labourtata 407 , Radiator Bottomex With Labourtractor , Radiator Bottomex With Labour L Jeep , Radiator Bottomex With Labour Tata 1210 , Radiator Bottomexchange With Labour Model Cargo 909 , Radiator Bottomexwith Labour L Tata 709 , Radiator Bottom With Labourleyland , Radiator Bottom With Labour L Jcb , Radiator Brackatex With Labourjcb , Radiator Brackatex With Labourjeep , Radiator Brackatex With Labourjumbo 1612 , Radiator Brackatex With Labourtata 1210 , Radiator Brackatex With Labour Cargo 909 , Radiator Brackatex With Labour Mo Leyland , Radiator Brackatex With Labour Model Dcm , Radiator Brackatex With Labour Tata 407 , Radiator Brackatex With Labour Tractor , Radiator Brackatwith Labour Model Eicher , Radiator Brackat With Labour Tata 709 , Radiator Framewith Labourjcb , Radiator Framewith Labourjeep , Radiator Framewith Labourjumbo 1612 , Radiator Framewith Labourleyland , Radiator Framewith Labourtata 407 , Radiator Framewith Labour Model Cargo 909 , Radiator Frame Ex With Labourdcm , Radiator Frame Ex With Labourtata 709 , Radiator Frame Ex With Labourtata1210 , Radiator Frame Exwith Labourtractor , Radiator Frame With Laboureicher , Radiator Jali Ex With Labourcargo 909 , Radiator Jali Ex With Laboureicher , Radiator Jali Ex With Labourjcb , Radiator Jali Ex With Labourjeep , Radiator Jali Ex With Labourleyland , Radiator Jali Ex With Labourtata 1210 , Radiator Jali Ex With Labourtata 407 , Radiator Jali Ex With Labourtractor , Radiator Jali Ex With Labour Dcm , Radiator Jali Exc With Labourtata 709 , Radiator Jali With Labourjumbo 1612 , Radiator Neck Ex With Labourdcm , Radiator Neck Ex With Laboureicher , Radiator Neck Ex With Labourjcb , Radiator Neck Ex With Labourjeep , Radiator Neck Ex With Labourjumbo 1612 , Radiator Neck Ex With Labourleyland , Radiator Neck Ex With Labourtata 407 , Radiator Neck Ex With Labourtata1210 , Radiator Neck Ex With Labourtractor , Radiator Neck Ex With Labour Tata 709 , Radiator Neck With Labour Cargo 909 , Radiator Service , Washing Lab Tata 1210 , Radiator Service , Washing Lab Tata 407 , Radiator Service , Washing Labourdcm , Radiator Service , Washing Laboureicher , Radiator Service , Washing Labourjcb , Radiator Service , Washing Labourjeep , Radiator Service , Washing Labourleyland , Radiator Service , Washing Labour 1612 , Radiator Service , Washing Labour Model Cargo 909 , Radiator Service , Washing Tata 709 , Radiator Service , Washing Tractor , Radiator Top Exchange With Jumbo 1612 , Radiator Top Exchange With Lab Tata 709 , Radiator Top Exchange With Labour Dcm , Radiator Top Exchange With Labour Eicher , Radiator Top Exchange With Labour Jcb , Radiator Top Exchange With Labour Leyland , Radiator Top Exchange With Labour Model Cargo 909 , Radiator Top Exchange With Labour Model Jeep , Radiator Top Exchange With Labour Tata 1210 , Radiator Top Exchange With Labour Tata 407 , Radiator Top Exchange With Labour Tractor , Red Oxide / Metal Primer Make Asian , Rejmal Paper ( All Size ) , Rejmal Paper ( All Size ) Feet , Shoe Jaali Lattu , Socket 1 Make B Class , Socket 1.5 Make B Class , Socket 1 / 2 Make B Class , Socket 2 Make B Class , Socket 2.5 Make B Class , Socket 3 Make B Class , Socket 3 / 4 Make B Class , Socket 4 Make B Class , Socket Nipple 3 Make Arti , Tai Lever , Tank Mastik Paints / Rubber Paints Make Shalimar , Tarpinmake Genuine , Tata 1210 Moulded Foot Rest Make Gmi , Tata 1210 Mudgaurd Half Round Rip Make Gmi , Tata 709Mudgard ( Pakkhe ) Make Gmi , Tee 1 Make B Class , Tee 1.5 Make B Class , Tee 1 / 2 Make B Class , Tee 2 Make B Class , Tee 2.5 Make B Class , Tee 3 Make B Class , Tee 3 / 4 Make B Class , Tee 4 Make B Class , Tee Tomy 7, 8, 10 , Thinner Make Genuine , Totiya1 Make Brass , Totiya1 Make G.I , Totiya1 Make Steel , Totiya1 / 2 Make Brass , Totiya1 / 2 Make G.I , Totiya1 / 2 Make Steel , Totiya3 / 4 Make Brass , Totiya3 / 4 Make G.I , Totiya3 / 4 Make Steel , Union 1 Make B Class , Union 1.5 Make B Class , Union 1 / 2 Make B Class , Union 2 Make B Class , Union 2.5 Make B Class , Union 3 Make B Class , Union 3 / 4 Make B Class , Union 4 Make B Class , Welding Cable , Welding Glass Black , Welding Glass White , Welding Goggles , Welding Rod 3.15 Mm Make Advani , Welding Rod 3.15 Mm Make Manglam , Welding Rod 4 Mm Make Advani , Welding Rod 4 Mm Make Manglam , Welding Rod Brass Make Ngenuine , Wooden Patiye 1 Make Genuine , Wooden Patiye 2 Make Genine , Wooden Patiye 3 Make Genuine , Wooden Patiye 4 Make Genuine , Wooden Patiye 5 Make Genuine , Wooden Patiye 6 Make Genuine
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
40.
Educational and Research Institute #8925963 Technical Bid
Equipment Purchase , Atomic Absorption Spectrophotometer : Monochromator Should Have Littrow Or Better Design With Motorized Drive For Automatic Wavelength Selection And Peaking. Mirror Free Fiber Optics Light Transmission For Maximum Light Throughput And Best Detection Limit Preferred Wavelength Range 190 – 900 Nm Diffraction Grating 1800 Lines/Mm Blazed At 236 Nm And 597 Nm Is Preferred Reciprocal Linear Dispersion: 1.6 Nm/Mm Or Better Background Correction Should Have Built-In Continuum Source Double-Beam Background Correction Using High-Intensity Deuterium Arc Lamp. Spectral Bandwidths User Selectable Automatic Slit Widths Of 0.2, 0.7 And 2.0 Nm At Their Optimized Slit Height. Detector Wide-Range Segmented Solid-State Detector Is Preferred Lamp Turretminimum 4-Lamp Turret Multielement/Single Element Lamp Requirement Ca,Cu,Fe,Mg,Si,Zn,Co,Cr,Cu,Fe,Mn,Ni,K,Na, As, Pb Gas Controls Should Have Fully Computer-Controlled With Oxidant And Fuel Monitoring. Keyboard-Activated Remote Ignition System With Air-Acetylene. Acetylene Flow Should Be Automatically Adjusted Prior To The Oxidant Change When Switching To Or From Nitrous Oxide-Acetylene Operation. Safety Functions Interlocks To Prevent Ignition In Absence Of Proper Burner Head, The Nebulizer/End Cap, Or The Burner Drain System Preferred. Sample Introduction System Modular Sample Introduction System Consisting Of The Quick-Change Spray Chamber, Burner Head And Nebulizer Units. Alignment Of The Flame In The Light Beam Is Fully Automatic, Using A Motorized Burner Mount For Vertical And Horizontal Burner Adjustment And Automatic Software-Controlled Self-Optimization Of The Burner Position. The Optimization Of The Operating Flame Condition Is Also Fully Automatic And Software Controlled. Local Items To Be Quoted(A) Suitable Exhaust Hood (B) Uhp Grade Acetylene Gas Filled Cylinder (C) Double Stage Gas Regulator For Acetylene Gas Cylinder (D) Online Ups Of Suitable Capacity With 30Mins Back-Up Warranty One Year Installation/Demonstration Free Of Cost , Chns Analyser : 1. Fully Automated Pc Controlled Elemental Analyser For Solids, Liquid And Semi Solid Samples. 2. Operating Modes For Measurement Of Chns, Chn, Cns, And S. 3. Sample Weight Range : 0.2 To 1000 Mg For All The Modes. 4. Detection Range: 0 To 100% For All Elements ( C, H, N, S) With The Capability Of Measuring At Least 14Mg Absolute Carbon In Chns Mode And More Than 40 Mg In Cn Mode. 5. Limit Of Detection : 50 Ppm Or Better 6. Standard Deviation:?0.1% Of Absolute. 7. Analysis Time: The Instrument Should Be Able To Analyze Chns Simultaneously Within 10 Min Orless. 8. Fully Digital Electronics That Should Be Fully Integrated In Unit, No External Control Panels Required. 9. Should Have Mass Flow Controller/Electronic Flow Controller For Constant Flow Of Carrier Gas. Quick Swap Clamp Connections For Fast Maintenance Furnace System • Should Have Two Zone Double Furnace System, Separate For Combustion And Reduction With Independent Temperature Control For Each Furnace. It Should Be Possible To Set Difference Temperature For Combustion And Reduction In Chns Mode. • Controlled Furnace Temperature Should Be 1200 Deg C Or More. • Should Have Possibility To Use Ceramic/Quartz Ash Finger To Handle High Halogen Or Fluorine Contents Sample. • The Furnace Should Have 8 Years Warranty From The Manufacturer.Separation System • Advanced Chromatographic Separation Of Gases. • Complete Instrument Control Over Elution Process With Provision Of Auto Zero Of Baseline After Each Element Elution.• Baseline Separation Of C From N Peak Signal With A Concentration Ratio Of 12000:1 Or Better • Full Separation Of All Analytes And There Should Be No Peak Tailing Or Peak Overlap.Detector System• Oxygen Intrusion Free Thermistor Technology-Based Temperature Stabilized Tcd Detector For Measurement Of C-H-N-S.• The Tcd Detector Should Have 8 Years Warranty From The Manufacturer. Auto Sampler System• Electromechanical Auto Sampler System With 100 Positions Or More In Single Tray. • The Auto Sampler Should Hold At Least 500 Mg Of Soil Sample.• Pneumatic Auto Sampler Is Not Allowed.• The Auto Sampler Should Be Zero Blank And Ensure Complete Removal Of Atmospheric Gases Before Sample Injection Into The High Temperature Reactor/Furnace. Carrier Gas • Possibility Of Using Argon Or Helium Gas As Carrier Gas.There Should Be An Option To Switch Off The Supply While The Instrument Is At Working Temperature To Save Carrier Gas And Time. Software • Should Be Windows 10 Based And Should Have Display Of Set And Actual Pressures, Flow Rates, Temperatures, Number Of Samples Analysed With Provision For Setting Maintenance Interval With Warning When Maintenance Needed • Should Have Segmented Leak Check Through Software To Enable Identification Of Exact Position Of Leak. Consumables• To Be Supplied With Consumables Sufficient For 1000 Sample Analysis In Chns/Cns Mode. Local Supplies • The Vendor Should Quote For The Complete System Including The Following Items:• Oxygen Gas Should Be Used As Combustion Gas & Helium Gas As A Carrier Gas. • 1 No Oxygen Gas Cylinder With Purity Of 99.99% Along With A Regulator.• 1 No Helium Gas Cylinder With Purity Of 99.99% Along With A Regulator.• Windows 10 Pro, I3 Processor With 4Gb Ram And 500Gb Ssd, With 21” Monitor, With Keyboard And Mouse. Training And Demonstrations• Onsite Free Of Cost Installation And Training By The Manufacturer Or Its Indian Agent.• Operative And Service Manual To Be Supplied• Detailed Service & Operation Manual Should Be Provided.Necessary Documents• Catalogue In The Original.• All Technical Specifications Should Be Printed On The Manufacturer’S Catalogue/ Datasheet. • Vendor Should Submit A List Of A Minimum Of 10 Users Of The Quoted Model From Government Institutions/Universities In India.• The Vendor Should Submit At Least One 10-Year-Old Po Copy Of The Quoted Instrument From Any Government Institute/University In India. • The Vendor Should Submit At Least 5 Po Copies Along With An Installation Report Of The Installed Instrument From Any Government Institutions In India. • The Oem/Vendor Should Have A Trained Service Engineer. A Relevant Training Certificate From Oem Is To Be Attached As Evidence.• The Vendor/Oem Must Have Service Support In India Along With Service Engineer Based In West Bengal To Provide After Sales Service Of The Instrument. , Uv-Visiblespectrophotometer : Specification Optical Design: -Double Beam Spectral Bandwidth: -2 Nm Light Source :-(Typical Lifetime) Xenon Flash Lamp (3 Years Guaranteed) Detectors: -Dual Silicon Photodiodes Wavelength Range: - 190–1100 Nm Wavelength Accuracy: - ±0.5 Nm Wavelength Repeatability: -<±0.2 Nm Scan Speed:-Slow, Medium And Fast (Up To 1600 Nm/Min) Photometric Linear Range –2A To +3.5A Photometric Accuracy:-±0.002A At 0.5A ,±0.004 A At 1.0 A, ±0.008A At 2.0A Photometricrepeatability :-±0.001A At 1A Photometric Noise :-<0.00020A At 0.0 A; <0.00030 A At 1.0 A; <0.00040 At 2.0 A Photometric Drift :-<0.0005 A/Hr Stray Light :-< 1.0%T 198 Nm (Kcl) , <0.05%T At 220 Nm (Nai), <0.03%T At 340 Nm (Nano2) Baseline Flatness: - ±0.002A 8-Position Cell Changer Peltierthermostatted Cell Holder(20–60 °C) Display 7-Inch Color Touchscreen, Tiltable, High Definition, 800 × 1280 Pixels
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
West Bengal View Result →
41.
Educational and Research Institute #8858714 Technical Bid
Purchase Of Equipment Atomic Absorption Spectrophotometer ( Aas ) : Fully-Integrated Benchtop Double Beam Atomic Absorption Spectrometer ( Aas ) Having The Following Specifications Should Be Quoted: Model Number And Technical Specification As Claimed Must Be In The Website For Verification. Quote Price Must Be In Indian Rupees And Includes Delivery Charges Up To Laboratory Technicalspecification Monochromator Should Have Littrow Or Better Design With Motorized Drive For Automatic Wavelength Selection And Peaking. Mirror Free Fiber Optics Light Transmission For Maximum Light Throughput And Best Detection Limit Preferred, Wavelength Range 190 – 900 Nm Diffraction Grating 1800 Lines / Mm Blazed At 236 Nm And 597 Nm Is Preferred , Reciprocal Linear Dispersion: 1.6 Nm / Mm Or Better , Background Correction Should Have Built-In Continuum Source Double-Beam Background Correction Using High-Intensity Deuterium Arc Lamp.Spectral Bandwidths User Selectable Automatic Slit Widths Of 0.2, 0.7 And 2.0 Nm At Their Optimized Slit Height.Detector Wide-Range Segmented Solid-State Detector, Lamp Turretminimum 8-Lamp Turret With Built-In Power Supplies Slot For Edl / Super Lamp Should Be Quoted.Lamps Requirements1.Single Or Multi Element Cathode Lamp-Fe, Mn, Cu, Zn, Ni, Cr, Cd, Ca, Mg, K, Mo, B, Na, P, Si, Al. 2. Electrode Less Lamp- As. Hg, Pb, Cd, Zn. Gas Controls Should Have Fully Computer-Controlled With Oxidant And Fuel Monitoring. Keyboard-Activated Remote Ignition System With Air-Acetylene. Acetylene Flow Should Be Automatically Adjusted Prior To The Oxidant Change When Switching To Or From Nitrous Oxide-Acetylene Operation.Safety Functions Interlocks To Prevent Ignition In Absence Of Proper Burner Head, The Nebulizer / End Cap, Or The Burner Drain System Preferred. Sample Introduction System Modular Sample Introduction System Consisting Of The Quick-Change Spray Chamber, Burner Head And Nebulizer Units. Alignment Of The Flame In The Light Beam Is Fully Automatic, Using A Motorized Burner Mount For Vertical And Horizontal Burner Adjustment And Automatic Software-Controlled Self-Optimization Of The Burner Position. The Optimization Of The Operating Flame Condition Is Also Fully Automatic And Software Controlled. Nitrous Oxide Burner Head, Hose Assemblymust Be Quoted If Required For Analysis Of Elements Mentioned In Tender Specification. Data Control System Complete Pc Control Using Windows Based Software Operating Under The Microsoft® Windows® 10 With Complete Control Of The Instrument And Its Major Accessories Plus Data Handling And Storage Should Be Quoted. Accessories ( A ) Suitable Exhaust Hood ( B ) Uhp Grade Acetylene Gas Filled Cylinder ( C ) Uhp Grade Argon Gas Filled Cylinder ( D ) Uhp Grade Nitrous Oxide Gas Filled ( E ) Double Stage Gas Regulators For Acetylene, Argon & Nitrous Oxide ( Or Imported If Required ) ( F ) Gas Purification Panel For Above Gases ( G ) 10 Kva Online Ups , On Sitewarranty Three Year , Installation / Demonstration Free Of Cost , Chns Analyser: Fully Automated Pc Controlled Elemental Analyses For Solids, Liquid And Semi-Solid Samples. Operating Modes For Measurement Of Chns, Chn, Cns, And S. Model Number And Technical Specification As Claimed Must Be In The Website For Verification. Quote Price Must Be In Indian Rupees And Includes Delivery Charges Up To Laboratory. Sample Weight Range : Upto 1000 Mg For Chns Mode. It Should Be Able To Handle At Least 10Mg Absolute Carbon In Chns Mode. Detection Range: 0 To 100% For All Elements ( C, H, N, S ) Lod : 50 Ppm Or Better Standard Deviation : ?0.1% Of Absolute. Fully Digital Electronics That Should Be Fully Integrated In Unit, No External Control Panels Required Should Have Mass Flow Controller / Electronic Flow Controller For Constant Flow Of Carrier Gas. Quick Swap Clamp Connections For Fast Maintenance. Standard Deviation : ?0.1% Of Absolute. Fully Digital Electronics That Should Be Fully Integrated In Unit, No External Control Panels Required, Should Have Mass Flow Controller / Electronic Flow Controller For Constant Flow Of Carrier Gas.Quick Swap Clamp Connections For Fast Maintenance.Furnace System• Should Have Two Zone Furnace System, Separate For Combustion And Reduction With Independent Temperature Control For Each Furnace. It Should Be Possible To Set Difference Temperature For Combustion And Reduction In Chns Mode.• Controlled Furnace Temperature Should Be 1200 Deg C Or More • Furnace Working On Low Voltage For Safety And Long Life With 10 Years Warranty. • Should Have Possibility To Use Ceramic / Quartz Ash Finger To Handle High Halogen Or Fluorine Contents Sample. Separation System• Advanced Chromatographic Separation Of Gases Using Temperature Programmed Desorption Technology.• Complete Instrument Control Over Elution Process With Provision Of Auto Zero Of Baseline After Each Element Elution.• Full Separation Of All Analytes And There Should Be No Peak Tailing Or Peak Overlap• Sulphur Being A Crucial Element, Should Be Analysed With Higher Column Temperature ( Separation Column ) Than Nitrogen, Carbon, And Hydrogen. All Necessary Accessories / Options In This Regard Should Be Quoted As Mandatory Items, Detector System• Oxygen Intrusion Free Thermistor Technology Based Temperature Stabilized Tcd Detector For Measurement Of C-H-N-S• 10 Year Or More Warranty On Tcd.• All The Internal Gas Flow Line Should Be Heated To Avoid Condensation. Autosampler System• Electromechanical Auto Sampler System With 100 Positions Or More. The Autosampler Should Hold At Least 500 Mg Of Soil Sample.Pneumatic Autosampler Is Not Acceptable. • The Autosampler Should Be Zero Blank And Ensure Complete Removal Of Atmospheric Gases Before Sample Injection Into The High Temperature Reactor / Furnace. It Is A Crucial Scientific Requirement And Must Be Met.Carrier Gas: Possibility Of Using Argon Gas Or Helium Gas As A Carrier Gas. There Should Be Option For Automatic Carrier Gas Switching From Helium To Nitrogen Or Argon Or There Should Be Option Switch Off The Gas Supply While The Machine Is At Working Temperature To Save Carrier Gas And Time.Software• Should Be Windows 10 / 11 Professional Based And Should Have Display Of Set And Actual Pressures, Flow Rates, Temperatures, Number Of Samples Analysed With Provision For Setting Maintenance Interval With Warning When Maintenance Needed • Should Have Segmented Leak Check Through Software To Enable Identification Of Exact Position Of Leak.Consumables: To Be Supplied With Consumables Sufficient For 1, 000 Sample Analysis In Chns / Cns Mode, Accessories Vendor Should Quote For Complete System Including The Following Items S. No. Details Quantity, 1 Pc ( Intel Core I5 Or Better , Ram-At Least 8Gb Ram, Ssd 512 Gb, Hard Drive-1Tb Or More, Screen Size-21’’Or More, At Least 3 Usb 2.0 Portswindows 10, 64-Bit ) , Black & White Laserjet Printer 012 Uhp Grade Helium Gaswith Double Stage Regulator 013 Uhp Grade Oxygen Gaswith Double Stage Regulator , Necessary Documents:1. Catalogue In Original. 2. All Technical Specifications Should Be Printed On The Manufacturers Catalogue / Data Sheet. Separate Sheet Will Not Be Acceptable.3. Please Include The List Of Minimum 10 Users In India.On-Site Warranty Three Year , Double Beam Uv Vis Spectrophotometer: Microprocessor Based Uv-Vis Spectrophotometer For Operation On 220V / 50Hz. ? Stand-Alone Operation As Well As Complete Control Through Pc With Pc Software Supplied As Standard ? Double Beam Optics With Czerny-Turner Monochromator ? Wide Wavelength Range Of 1, 100 Nm To 190 Nm ? Variable Spectral Bandwidth 0.5, 1, 2, 4, 5 Nm ? Wavelength Setting In 0.05 Nm ? Wavelength Accuracy Of + 0.1Nm For D2 Spectral Line ? Wavelength Repeatability Of + 0.1Nm ? Variable Wavelength Scanning Speed: = 3, 000 Nm / Min ? Slew Rate : 4800 Nm / Min ? Ultra Low Stray Light Of <0.05% At 220Nm Nai, 360Nm Nano2 ? Wide Photometric Range Of -3.0 To +3.0 Abs And 0 To 300 %T ? High Photometric Accuracy Of + 0.002 Abs ( 0~0.5 Abs ) ? High Photometric Repeatability Of Less Than ± 0.001 Abs ( 0~0.5 Abs ) ? Baseline Stability: = 0.0004 Abs / 30 Min ( 500 Nm, One Hour After Light Source Turned On ) ? Baseline Flatness: ± 0.001 Abs ( 1100 ~ 190 Nm, One Hour After Light Source Turned On ) ? Ultra Low Photometric Noise Of < 0.0008 Abs ( 500 Nm ) ? Dual Source – High Intensity Halogen Lamp And Deuterium Lamp With Built-In Light Source Auto Position Adjustment ? High Sensitivity Silicon Photodiode Detector ? 3 Or More Usb Ports For High Speed Pc And Printer Connectivity ? All Operational Modes As Standard – Photometric; Spectrum; Quantitation; Kinetics, Time Scan, Bio-Method In Stand Alone And Pc Mode. ? Large Sample Compartment Compatible With Wide Range Of Accessories. ? Must Supply One Pair Of 10Mm Path Length Quartz Cuvettes Of 3.5 Ml Volume As A Standard Supply ? 12 Months Warranty From The Date Of Installation On Site Warranty : Three Years
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
West Bengal View Result →
42.
Educational and Research Institute #8854499 Technical Bid
Supply Of Consumable Surgical Items And Making A Rate Contract For 2 Years - 1 Abg Preheparised Syringe Abg Heparin Lithium Based Prefilled Syringes With Filter Pro Cap To Expels Out Air Bubble From Blood Sample Available In 1Ml & 3Ml Should Have Usfda / Ce Certification 2 Absorbable Gelatin Surgical Sponge Sterile; 70X50x10 Mm 3 Adhesive Circular Round Spot Band-Aid 1 Round=2.5 Cms 4 Air Cusion Ring To Prevent Bed Sore & Help In Position 5 Air Mattress 1.Standard Length Of Mattress Made Of High Quality Puncture Resistant Washable Material With Sufficient Non-Channel Segment To Ensure Proper Application To The Bed, 2. Have Multiple Channels For Inflation And Delation Of Air Columns, 3. Equipped With High Quality Pneumatic Pump To Drive Air Across The Channel In Operator Variable Fashion, 4. The Pneumatic Motor Is Of High Quality And Able To Sustain Prolonged Operation Of Many Days, 5-The Frequency, The Pressure Generated And Number Of Tracks Inflated And Deflated Can Be Varied, 6-Conforms To Electricity Safety Gegulations Applicable For Medical Grade Equipments, 7-Iso 9001 Certification / Ce Certification. 6 Airway Nasal : 6 Implant Tested Material , Non-Pyrogenic, Non-Toxic Pvc / Silicon, Bevel Tip 7 Airway Nasal : 7 Implant Tested Material , Non-Pyrogenic, Non-Toxic Pvc / Silicon, Bevel Tip 8 Airway Nasal : 8 Implant Tested Material , Non-Pyrogenic, Non-Toxic Pvc / Silicon, Bevel Tip 9 Airway Oral : 0 With Bite Block, Color Coded, Made Up Of Non-Toxic Medical Graded Material 10 Airway Oral : 1 With Bite Block, Color Coded, Made Up Of Non-Toxic Medical Graded Material 11 Airway Oral : 2 With Bite Block, Color Coded, Made Up Of Non-Toxic Medical Graded Material. 12 Airway Oral : 3 With Bite Block, Color Coded, Made Up Of Non-Toxic Medical Graded Material 13 Airway Oral : 4 With Bite Block, Color Coded, Made Up Of Non-Toxic Medical Graded Material. 14 Alcohol Thermometer To Maintain The Temperature Of Refrigerator 0° To 150°C 15 Ambu Bag Adult Size With Reservior Beg 16 Anatomical Face Mask For Anaesthesia No.1 Silicon, Transparent With Adjustable Cushion, With Hook Rng And Strap, Flexible 22 F Connection. 17 Anatomical Face Mask For Anaesthesia No.2 Silicon, Transparent With Adjustable Cushion, With Hook Rng And Strap, Flexible 22 F Connection. 18 Anatomical Face Mask For Anaesthesia No.3 Silicon, Transparent With Adjustable Cushion, With Hook Rng And Strap, Flexible 22 F Connection. 19 Anatomical Face Mask For Anaesthesia No.4 Silicon, Transparent With Adjustable Cushion, With Hook Rng And Strap, Flexible 22 F Connection. 20 Anatomical Face Mask For Anaesthesia No.5 Silicon, Transparent With Adjustable Cushion, With Hook Rng And Strap, Flexible 22 F Connection. 21 Ankle Foot Orthosis Static Afo Hold The Ankle In Fixed Neutral Passion Allows Total Limitation Of Movement Of Ankle Joint, Regular Size ( A ) . 22 Anti Lice Shampoo Each 10 Ml Contains: Camphor-10 Mg, Sita Phal Beej Extract-1 Mg, Coconut Oil-0.2 Mg, Neem Extract-0.1 Mg; Bottle Of 50 Ml. 23 Apron Non-Woven 4 Layered Sterile, Lightweight, Breathable And Low Linting Surgical Disposable Gown With Outer And Inner Layer Made Of Strong And Spun Bond Repellent Fabric, And Two Middle Layers Offering Fluid Control And Bacterial Barrier. Medium, Large, Xl. 24 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-5.0 Mm Id. 25 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-5.5 Mm Id. 26 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-6.0 Mm Id. 27 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-6.5 Mm Id. 28 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-7.0 Mm Id. 29 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-7.5 Mm Id. 30 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-8.0 Mm Id. 31 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-8.5 Mm Id. 32 Armoured / Flexometallic Tube Cuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-9.0 Mm Id. 33 Armoured / Flexometallic Tube Uncuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-3.5 Mm Id. 34 Armoured / Flexometallic Tube Uncuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-4 Mm Id. 35 Armoured / Flexometallic Tube Uncuffed Pvc, Disposable, Wire Reinforced, Non-Kinkable, Size-4.5 Mm Id. 36 Arterial Cannula 20 G Arterial Cannula With Guide Wire Flow Switch, Sterile Pack. 37 Autoclave Indicator Tape Adhesive Sterilization Indicator Tape 38 B-20 Soln For Fumigation Bactericide-Fungiside-Virucide, 5 Litre Pack 39 Bains Anaesthesia Circuit ( Disposable ) - Length 2 Mtrs Adult, Coaxial Mapleson D Breathing Circuit, With Latex Free Reservoir Bag Of At Least 2 Ltrs Capacity And Apl Valve. 40 Bandage Cotton Rolled Isi Marked Size 10 Cm X 4 Mtr, ( Packet Of 12 ) 41 Bandage Cotton Rolled Isi Marked Size 15 Cm X 4 Mtr ( Packet Of 12 ) 42 Bandage Zinc Oxide Elastic Self Adhesive Ip 10 Cm X 4-6 Mtr ( Dynaplast ) 10 Cm X 4-6 Mtr ( Dynaplast ) 43 Bandage Zinc Oxide Elastic Self Adhesive Ip 15 Cm X 4-6 Mtr ( Dynaplast ) 44 Bed Pan Plastic, Good Quality 45 Bed Sheet - Disposable Disposable, White, Chemical Free, Skin Friendly, Non-Drug, Bacterial Barrier, Tear & Puncture Resistant, Loose Fibre And Lint Free, Impervious To Fluids, Repellent To Fluid, Sterilized, Length 100-250 Cm, Width 160-400 Cm, Weight 201-300 Gm, Non-Woven Fabric, Pp Spunbond 40-60 Gsm, Iso Certified 46 Biological Indicators For Eto 1-Spore Strip ( Bacillus Atrophaeus ) , Self Contained Vial. 2-Made Up Of Large Number Of Resistant Bacterial Spores For Ethylene Oxide. Box Containing 100 Indicators. 47 Biological Indicators For Steam 1-Spore Strip ( Bacillus Atrophaeus ) , Self Contained Vial. 2-Made Up Of Large Number Of Resistant Bacterial Spores For Ethylene Oxide. Box Containing 100 Indicators. 48 Bipap Mask Full Face Mask With Head Gear Adult Size 49 Bite Block To Prevent Occlusion Of Mouth And Damage Of Airway Devices. 50 Blankets For Existing Convective Air Patient Warning System Of M / S. Covidien Ltd, Usa 1-The Blanket Should Be Latex Free, Made Of 2 Ply Non Woven Material Outer Layer And Polyethylene Inner Layer. 2-The Blanket Should Be Available In Sizes-Adult Lower Body. 3-Blanket Should Be Lighter And Puncture / Fluid Resistant. Disposable. 51 Blankets For Existing Convective Air Patient Warning System Of M / S. Covidien Ltd, Usa 1-The Blanket Should Be Latex Free, Made Of 2 Ply Non Woven Material Outer Layer And Polyethylene Inner Layer. 2-The Blanket Should Be Available In Sizes-Adult Full Body 3-Blanket Should Be Lighter And Puncture / Fluid Resistant. Disposable. 52 Blankets For Existing Convective Air Patient Warning System Of M / S. Covidien Ltd, Usa 1-The Blanket Should Be Latex Free, Made Of 2 Ply Non Woven Material Outer Layer And Polyethylene Inner Layer. 2-The Blanket Should Be Available In Sizes- Paediatric. 3-Blanket Should Be Lighter And Puncture / Fluid Resistant. Disposable Medical Grade Material. 54 Bone Wax 2 Gm, Sterilized Pack ( Box Of 12 ) 55 Bowidi & Dick Test Kit Or Helix Kit Series Of Steam Penetration ( Air Removal ) Barriers In The Center Of Which Is Chemical Indicator Sheet. 56 Catgut Suture ( Chromic ) Size 2-0 ( Box Of 12 Foil ) 57 Catheter Foleys For Prolonged Urinary Drainage ( Silicon Coated ) Size Fg-8 58 Catheter Foleys For Prolonged Urinary Drainage ( Silicon Coated ) Size Fg-10 59 Catheter Foleys For Prolonged Urinary Drainage ( Silicon Coated ) Size Fg-12 60 Catheter Foleys For Prolonged Urinary Drainage ( Silicon Coated ) Size Fg-14 61 Catheter Foleys For Prolonged Urinary Drainage ( Silicon Coated ) Size Fg-16 62 Catheter Foleys For Prolonged Urinary Drainage ( Silicon Coated ) Size Fg-18 63 Catheter Mount ( Adult ) Light Weight, Double Swivel Rotating 30O On Both Axis, Minimal Compliance, Minimal Dead Space, Expandable Tubing. 64 Catheter Mount ( Paed ) Light Weight, Double Swivel Rotating 30O On Both Axis, Minimal Compliance, Minimal Dead Space, Expandable Tubing. 65 Chemical Integrator - Class 5 Conform To En-Iso11140-1, Suitable To Confirm All The Critical Parameters The Steam Sterilizations, Indicate Sterilant Penetration, Non-Toxic. 66 Cock Up Splint Size-Adult, Padded Alluminium With Blue Polyester Urethane Foam For Comfort, Static 67 Condom Catheter Large, -30Mm, Sterile, Ce Marked, Latex, Suitable For Direct Connection To Urine Bag. 68 Condom Catheter Medium -25 Mm, Sterile, Ce Marked, Latex, Suitable For Direct Connection To Urine Bag. 69 Condom Catheter Small-20 Mm, Sterile, Ce Marked, Latex, Suitable For Direct Connection To Urine Bag. 70 Cotton Wool Absorbent Roll Of 500 Gm 71 Cranial Fixation System Two Hole Straight Plates 12 Mm 72 Cranial Fixation System Two Hole Straight Plates 15 Mm 73 Cranial Fixation System Two Hole Straight Plates 20 Mm 74 Cranial Fixation System Three Holes Y Plate 15 Mm And 20 Mm 75 Cranial Fixation System Four Holes Square Plate ( Titanium ) 76 Cranial Fixation System Burr Hole Cover 77 Cranial Fixation System Screw Driver Bit 78 Cranial Fixation System Screw Driver Bundle 79 Crepe Bandage 4 Inch / 10 Cm Width, Length 4 Mtrs 80 Crepe Bandage ( Streched Length ) Width 15 Cm. Stretched Length 4 Mtrs. 81 Csf Manometer Dial 82 Cuffed Trachesostomy Tube With Subglottic Suction Cuffed Tracheostomy Tube With Sub Glottic Secretion Lumen -Should Have Inbuilt Suction Port Opening Into A Suction Lumen For Suctioning Above The Cuff, Should Have Usfda / Ce And Implantation Tested Certificate Approved Certificate-Sizes 6.0Mm, 7.0Mm, 7.5Mm, 8.0Mm, 8.5Mm, 9.0Mm, 10.0Mm 83 Curved Round Body Needle Size 2-0 84 Cvp Line -Double Lumen With Y Canula Double Lumen Central Venous Catheter ( Seldinger Technique ) , Having Ecg Lead And Kink Proof Guide Wire. Lumen In 16 / 18 / 20 G. Length 20 Cm, With Y Canula. 85 Cvp Line -Triple Lumen With Y Canula Triple Lumen Central Venous Catheter ( Seldinger Technique ) , Having Ecg Lead And Kink Proof Guide Wire. Lumen In 16 / 18 / 20 G. Length 20 Cm, With Y Canula. 86 Cvp Line Tripple Lumen For Peadatric, 7Fr, 15 Cm 87 Cvp Manometer Central Venous Pressure Monitoring Set 88 Diaper Adult 89 Diaper Paediatric 90 Disposable Gown Isolation Gown, Medical Green, Disposable, Breathable, Antistatic, Impervious To Fluids, Sterilized, Non-Woven Sms + Polycoated, Closing At Neck, Full Sleeve And Opening Over Locked With Elastic, Certified, Length 101, Width 60, With Belt To Tie, 91 Documentation Labels ( Eto ) Conform To En-Iso-11140-1, Without Lead, Indicator Should Be In Middle, Turn Pink To Blue; 15 Rolls / Box. 92 Documentation Labels ( Steam ) Conform To En-Iso-11140-1, Indicator Should Be In Middle, Turn To Win Red To Green; 15 Rolls / Box. 93 Ecg Electrodes ( Adult ) Wet Gel Base, Pad Should Be Non-Drying, Back Adhesive-Foam, Aggressive, Radiolucent Type, Minimum Artifact. 94 Ecg Electrodes ( Paed. ) Wet Gel Base, Pad Should Be Non-Drying, Back Adhesive-Foam, Aggressive, Radiolucent Type, Minimum Artifact. 95 Ecg Jelly 250 Ml Bottle 96 Ecg Paper Rolls 50 Mm X 30 Mtrs 97 Ecg Paper Rolls 80 Mm X 30 Mtrs 98 Eeg Paste Pack Of 250 Gm 99 Elbow Immobilizer Use To Maintain Extention Position With Hook And Loop Closer 10-14, Regular Size ( A ) 100 Emg Needle Adult, 38 Mm 101 Endo Treacheal Tube With Suction Port Size 6.0 102 Endo Treacheal Tube With Suction Port Size 6.5 103 Endo Treacheal Tube With Suction Port Size 7.0 104 Endo Treacheal Tube With Suction Port Size 7.5 105 Endo Treacheal Tube With Suction Port Size 8.0 106 Endotracheal Tube Cuffed With Inverted Cuff Technology Endotracheal Tube Cuffed With Inverted Cuff Technology , Should Have Addtional Subglottic Suction Lumen For The Removal Of Secretion Above The Cuff , Should Be Made Up Of Thermosensitive Pvc , Should Have Clear Markings On Tube , Intubation Depth Markig , Should Have Pilot Ballon With One Way Valve And Pilot Baloon Should Contain All Details Like Size Of Tube , Crd Etc , Sholud Have Implantation Biocompatible Tested Certificate With Usfda Approval And Ece Approved Sizes-5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9Mm 107 Endotracheal Tube: 2 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 108 Endotracheal Tube: 2.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 109 Endotracheal Tube: 3 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 110 Endotracheal Tube: 3.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 111 Endotracheal Tube: 4 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 112 Endotracheal Tube: 4.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 113 Endotracheal Tube: 5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, Without Cuff. 114 Endotracheal Tube: 5.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 115 Endotracheal Tube: 6 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 116 Endotracheal Tube: 6.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 117 Endotracheal Tube: 7 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 118 Endotracheal Tube: 7.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 119 Endotracheal Tube: 8 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 120 Endotracheal Tube: 8.5 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 121 Endotracheal Tube: 9 Mm Id Siliconized Pvc, Non-Toxic To Tissues Implanation Tested, With 15 Mm Connector Confirming To Iso 5356 And 7228, 1 Cm Marking On Both Side Of Tube, Bevel With Murphy Eye, Radio-Opaque Line, With Soft Seal Cuff ( Wilth Sensiltive Pilot Ballon With One Way Valve ) . 122 Face Shield - Disposable 1. Material-Plastic 2. Colour-Any 3. Lenght 230, 4.Width 300, 5 Thickness 25, 6 Coverage Front Face, Eyes, Nose, Side Face 7.Reusable-No 8. Optically Clear, Antifog, Light Weight, Anti Static, Vented Foam Design For Increased Air Flow And Comfort. 9. Iso Certified 10. With Adjustable Band 123 Fibrin Sealant Tisseel ( Pre-Filled Syringe ) 124 Food Handling Gloves As Per Fda Specifications, One Packet Of 100 Nos 125 Formalin Tab. 1 Gm Each 126 Gauze Absorbent 60 Cm X 20 M, ( Isi Mark ) As Per Drugs & Cosmetics Rule 1945-124-C Schedule F-11 ( Certificate For Same Should Be Provided ) . 127 Gigli Saw Wire Gigli Wire Saw 4 Wires, 400Mm 128 Glass Vial For Csf Sample With Lid 5 Ml, Clear Glass Tubelar Borosilicate With Screw Neck With Lid 129 Guide Demartel Gigli Wire Introducer, Stainless Steel, 33 Cm 130 Gum Elastic Bougies Reusable, With Markings For Intubation, Adult 70 Cm X 14 Fr Blue Straight Tip. 131 Hand Rub 70%-80% Ethanol Based. Ethyl Alcohol / Propyl Alcohol With Chlorhexidine Gluconate 20% Lp1 1% V / V Or Benzalkonium Chloride Solution 50% Or Ethyl Hexadyl Diamethyl Ammonium Ethyl Sulphate 0.2% W / W Or Methyl Parahydroxybenzonate 0.10% W / W Or Propyl Parahydoxybenzonate 0.05% W / W. Properties And Norms: Bactericidal Neen 1040 Standard Fungicidal Neen 1275 Active On Hiv ( Aids ) , Hbv ( Hepatitis B ) Herpes Viruses. 500 Ml Pack. Should Be Provided With Pump. 132 Hand Rub 70%-80% Ethanol Based. Ethyl Alcohol / Propyl Alcohol With Chlorhexidine Gluconate 20% Lp1 1% V / V Or Benzalkonium Chloride Solution 50% Or Ethyl Hexadyl Diamethyl Ammonium Ethyl Sulphate 0.2% W / W Or Methyl Parahydroxybenzonate 0.10% W / W Or Propyl Parahydoxybenzonate 0.05% W / W. Properties And Norms: Bactericidal Neen 1040 Standard Fungicidal Neen 1275 Active On Hiv ( Aids ) , Hbv ( Hepatitis B ) Herpes Viruses. 100 Ml Pack. 133 Hand Rub 70%-80% Ethanol Based. Ethyl Alcohol / Propyl Alcohol With Chlorhexidine Gluconate 20% Lp1 1% V / V Or Benzalkonium Chloride Solution 50% Or Ethyl Hexadyl Diamethyl Ammonium Ethyl Sulphate 0.2% W / W Or Methyl Parahydroxybenzonate 0.10% W / W Or Propyl Parahydoxybenzonate 0.05% W / W. Properties And Norms: Bactericidal Neen 1040 Standard Fungicidal Neen 1275 Active On Hiv ( Aids ) , Hbv ( Hepatitis B ) Herpes Viruses. 5 Ltrs Pack 134 Hand Rub - Spray 25% Citrus Limon, 1% Aloe E.O., Processed In 74% Ipa W / W And Sodium Benzoate, 500 Ml Pack 135 Heavy Duty Gloves Should Be Good Quality Rubber; Acid Alkaline Proof Autoclave, Reusable, Free Size Orange Colour. 136 High Pressure Tubing 200 Cm Made Up Of Non-Toxic Medical Graded Pvc, Able To Withstand A Pressure Of 580 Psi Atleast, Fittd With Male / Male And Male / Female Luer Locks, Minimal Dead Space. 137 High Pressure Tubing 150 Cm, Made Up Of Non-Toxic Medical Graded Pvc, Able To Withstand A Pressure Of 580 Psi Atleast, Fittd With Male / Male And Male / Female Luer Locks, Minimal Dead Space. 138 Hiv Kit Two Sleeve Crown Gloves Face Mask Eye Glass 139 Hme Filter With Pleated Hydrophobic Elements, Transparent 15 / 22Mm Connector Iso 5356 Standards, Bacterial Filtration Upto 99.99999%, Viral Filtration Upto 99.9999%, Co2 Monitoring Port, Dead Space Less Than 50 Ml And Weight Of Unit <20 Gm, Iso / Ce Marked. 140 Hme Filter For Tracheostomy Tube Transparent, 15 / 22 Connector, Iso / Ce Certified, Viral And Bacterial Filtration Upto 99.999%, Minimal Dead Space ( <25 Ml ) , Should Have Oxygen Port. 141 Holder For Evacuated Blood Collection Tube With Push Button On Holder To Release Needle 142 Hospital Rubber Sheeting 1000 Mm X 1 Mtrs 143 Hot Water Bottle Rubber, Standard Size 144 Hypo Allergic Surgical Adhesive Paper Tape- 1 / 2 Inch X 9 Mtr Hydro-Entangled Polyester Fiber, Non Woven, Porous Perforated Thus Breathable, Water Resistant, Stretchable Soft Cloth Backing, Coated With Pressure Sensitive Hypo-Allergic, Acrylate Adhesive. 145 Hypo Allergic Surgical Adhesive Paper Tape- 1Inch X 9 Mtr Hydro-Entangled Polyester Fiber, Non Woven, Porous Perforated Thus Breathable, Water Resistant, Stretchable Soft Cloth Backing, Coated With Pressure Sensitive Hypo-Allergic, Acrylate Adhesive. 146 Hypo Allergic Surgical Adhesive Paper Tape- 2 Inch X 9 Mtr Hydro-Entangled Polyester Fiber, Non Woven, Porous Perforated Thus Breathable, Water Resistant, Stretchable Soft Cloth Backing, Coated With Pressure Sensitive Hypo-Allergic, Acrylate Adhesive. 147 Hypo Allergic Surgical Adhesive Paper Tape- 3 Inch X 9 Mtr Hydro-Entangled Polyester Fiber, Non Woven, Porous Perforated Thus Breathable, Water Resistant, Stretchable Soft Cloth Backing, Coated With Pressure Sensitive Hypo-Allergic, Acrylate Adhesive. 148 Hypodermic Needle-18 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 149 Hypodermic Needle-20 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 150 Hypodermic Needle-21 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 151 Hypodermic Needle-22 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 152 Hypodermic Needle-23 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 153 Hypodermic Needle-24 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 154 Hypodermic Needle-26 G Silicon Coated Needle With Non-Toxic, Non-Pyrogenic Polypropylene Hub, Fine & Smooth Cutting Edges Of Bevel End. 155 Hypodermic Syringes :1 Ml Sterile, Latex Free, Pvc Free, Made Up Of Virgiln Polypropylene Barrel And Polyethylene Breakable Plunger Plastic, 1 Ml Graduations. 156 Hypodermic Syringes :10 Ml Sterile, Latex Free, Pvc Free, Made Up Of Virgiln Polypropylene Barrel And Polyethylene Breakable Plunger Plastic, 1 Ml Graduations. 157 Hypodermic Syringes :2 Ml Sterile, Latex Free, Pvc Free, Made Up Of Virgiln Polypropylene Barrel And Polyethylene Breakable Plunger Plastic, 1 Ml Graduations. 158 Hypodermic Syringes :20 Ml Sterile, Latex Free, Pvc Free, Made Up Of Virgiln Polypropylene Barrel And Polyethylene Breakable Plunger Plastic, 2 Ml Graduations. 159 Hypodermic Syringes :5 Ml Sterile, Latex Free, Pvc Free, Made Up Of Virgiln Polypropylene Barrel And Polyethylene Breakable Plunger Plastic, 1 Ml Graduations. 160 Hypodermic Syringes :50 Ml Sterile, Latex Free, Pvc Free, Made Up Of Virgiln Polypropylene Barrel And Polyethylene Breakable Plunger Plastic, 10 Ml Graduations. 161 Identification Belt Mother 162 Identification Belt Baby 163 Infants Feeding Tube Fg-10 Non-Toxic, Non-Irritant Medical Graded Pvc / Silicon, Color Coded. 16 164 Infants Feeding Tube Fg-5 Non-Toxic, Non-Irritant Medical Graded Pvc / Silicon, Color Coded. 165 Infants Feeding Tube Fg-6 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Color Coded. 166 Insuline Syringe 40 Units 167 Intravenous Canula Size G-16 With Injection Port Non-Pyrogenic Ptfe Catheters With Thin Wall Technology, Back Cut Needle, With Side Port, Radio Opaque, Packed In Tyvek Paper.Colour Coded. 168 Intravenous Canula Size G-18 With Injection Port Non-Pyrogenic Ptfe Catheters With Thin Wall Technology, Back Cut Needle, With Side Port, Radio Opaque, Packed In Tyvek Paper.Colour Coded. 169 Intravenous Canula Size G-20 With Injection Port Non-Pyrogenic Ptfe Catheters With Thin Wall Technology, Back Cut Needle, With Side Port, Radio Opaque, Packed In Tyvek Paper.Colour Coded. 170 Intravenous Canula Size G-22 With Injection Port Non-Pyrogenic Ptfe Catheters With Thin Wall Technology, Back Cut Needle, With Side Port, Radio Opaque, Packed In Tyvek Paper.Colour Coded. 171 Intravenous Canula Size G-24 With Injection Port Non-Pyrogenic Ptfe Catheters With Thin Wall Technology, Back Cut Needle, With Side Port, Radio Opaque, Packed In Tyvek Paper.Colour Coded. 172 Intravenous Canula Size G-26 With Injection Port Non-Pyrogenic Ptfe Catheters With Thin Wall Technology, Back Cut Needle, With Side Port, Radio Opaque, Packed In Tyvek Paper.Colour Coded. 173 Intravenous Set - Single Use Pyrogen Free, Non-Toxic Medical Grade Material, Flexible Drip Chamber, Disc Filter In Drip Chamber, Strong Roller Clamp With A Provision To Hold The Tube For Changing The Fluid Container Without Disturbing The Flow Rate, Extra Strong Spike With / Without Airvent Bacteria Barrier At Air Inlet. 174 Introducer Bougie Adult, 15 Fr X 70 Cm, Yellow 175 Knee Brace Size-Adult 176 Knee Brace Size-Medium 177 Kraft Paper ( To Be Used During Autoclaving ) Packet Of 100 Sheets 178 Kurta Payjama Non Woven, Full Sleeves White, Free Size, 75 Gsm 179 L.P. Needle Disposable--18 Type-Pencil Point Tip Needle ( Eldor Needle ) , Introducer Needle Must Be Present Along With It, Hub Of Needle--Transparent. 180 L.P. Needle Disposable--20 Type-Pencil Point Tip Needle ( Eldor Needle ) , Introducer Needle Must Be Present Along With It, Hub Of Needle--Transparent. 181 L.P. Needle Disposable--22 Type-Pencil Point Tip Needle ( Eldor Needle ) , Introducer Needle Must Be Present Along With It, Hub Of Needle--Transparent. 182 Laryngeal Mask Airway 1. Safe Hands Free Laryngeal Mask For Routine, Elective Surgical Procedure, 2-Should Be Made Of Medical Grade Silicon, 3-Should Have A Separate Inflation Line, 4-Should Have Aperture Bars To Prevent Obstruction By Epiglottis, 5-Should Be Reusable, Up To 40 Times Autoclavable, 6-Laryngeal Masks Of Following Sizes Of Should Be Provided:-1 / 1.5 / 2 / 2.5 / 3 / 4 / 5 & Cuff Deflator For Laryngeal Mask Size 1 / 1.5 / 2 / 2.5 / 3 / 4 / 5. 183 Liquid Paraffin 1 Litre Bottle 184 Liquid Soap Sodium Lauryl Sulfate-35%, Cocamidopropyl Betaine-10%, Aqua-Q.S.; Preservatives, Perfume, Ph Balanced, Herbal Aromas; 500 Ml Bottle 185 Long Knee Brace Gaiters Regular Size ( A ) 186 Medicated Paraffin Wax For Physiotherpy Use 1 Kg Container ( Having Contains Of Wax 50% Liquid Paraffin 25% & Vaslene 25% ) . 187 Microvolume Set -Paediatric Drip Set Pyrogen Free, Non-Toxic Medical Grade Material, Large Calibrated Burette Chamber Of Capacity Of 110 Ml At Least, Bacteria Proof Venting, Injection Port For Supplementary Medication, Automatic Shut Off Valve, Micro Dropper With Drop Size Of 20 Drop Size Per Ml And Flexible Drip Chamber, Roller Flow Controller, Extra Strong Spike With / Without Airvent Bacteria Barrier At Air Inlet. 188 Monofilament Polyamide Black 70 Cm, 3-0 26 Mm 3 / 8 Circle Reverse Cutting, Box Of 12 189 Monofilament Polyamide Non Absorbable Surgical Suture 70 Cm, 2-0 45 Mm 3 / 8 Circle Reverse Cutting, Box Of 12 190 Mortury Sheet For Dead Body Packing 191 Mucus Extractor 50 Ml / Vial For Sputam Culture 192 Multi Enzymatic Cleaner 1.Should Be Ideal For Delicate Instruments, Devices, Probes Etc. Made Up Of Stainless Steel, Glass, Rubber Etc. 2. Should Contain Different Types Enzymes With Strong Actions On Proteinaceous And Fatty Matter. 3. Should Have Near Neutral Ph With Low Causticity. 4. Should Be Safe For Users Hands And Should Have No Free Caustic. 5. Should Be Used In Water Sterilizers, Cold Water Soaks And Ultrasonic Cleaners. 6. Should Have Superior Wetting Power To Penetrate Hidden Surfaces. 7. Should Be Biodegradable, Noncorrosive, Nonabrasive And Nontoxic. 8. Can Be Used With Hard Water Too. 193 N-95 Mask Filter Efficient Of 95% Or More Against Particulate Aerosols. It Should Be Disposable And To Be Able To Fit For Vide Range Of Face Sizes. It Accompany With Certification From Niosh Or Equivalent Certification. 194 Nasal Proxy Oxygen Tube Twin Bore Nasal Oxygen Set For Adult 195 Naso Gastric Tube Fg- 6 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 196 Naso Gastric Tube Fg- 8 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 197 Naso Gastric Tube Fg-10 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 198 Naso Gastric Tube Fg-12 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 199 Naso Gastric Tube Fg-14 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 200 Naso Gastric Tube Fg-16 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 201 Naso Gastric Tube Fg-18 Non Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 202 Needle For Evacuated Blood Collection Tube Size 22G X 1.5 Inch With Flash Back Provision For Easy Viewing Of Blood 203 Needle For Evacuated Blood Collection Tube Size 22 G X 1 Inch With Flash Back Provision For Easy Viewing Of Blood 204 Nitrile Gloves Synthetic Nitrile Latex Manufacturing From Acrylonitrile - Butodiene, Medium Size, Length 240 Mm, Colour Blue / Gree 205 Nitrile Gloves Synthetic Nitrile Latex Manufacturing From Acrylonitrile - Butodiene, Large Size, Length 240 Mm, Colour Blue / Gree 206 Nitrile Gloves Synthetic Nitrile Latex Manufacturing From Acrylonitrile - Butodiene, Xl Size, Length 240 Mm, Colour Blue / Gree 207 Non Absorbable Black Braided Silk Suture Size :1 -0 1 / 2 Circle Round Body 90 Cm 25 Mm Needle ( Box Of 12 Foil ) 208 Non Absorbable Surgical Suture Black Braided Silk 3-0, 25 Meter / Reel ( Box Of 6 Reels ) 209 Non Sterile Surgical Rubber Gloves Size -6.0 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Specification, 5-Anatomic Shape For Easy Fit And Less Fatigue, 6-Think And Beaded Cuff To Reinforce Cuff Area, 7-Tensile Strength Should Met With Bis Standards ( Certificate Should Be Provided ) , 8-Textured Surface For Better Instrument Grip, 9-Pre-Powdered With Usp Bioabsorable Corn Starch, 10-Minimum Length Of Gloves Should Be>280 Mm, 11-Thickness At Palm Surface Must Be At Least .15 Mm, 12-Latex Protein Content Must Be <100 Μg / Dm² To Reduce The Allergy ( Sample Test Report Should Be Provided ) , 13-Must Provide The Test Reports For Inspection Of Gloves Regarding Pin Hole Test, Viral Penetration Test. Size 6.0 210 Non-Sterile Surgical Rubber Gloves 6.5 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Specification, 5-Anatomic Shape For Easy Fit And Less Fatigue, 6-Think And Beaded Cuff To Reinforce Cuff Area, 7-Tensile Strength Should Met With Bis Standards ( Certificate Should Be Provided ) , 8-Textured Surface For Better Instrument Grip, 9-Pre-Powdered With Usp Bioabsorable Corn Starch, 10-Minimum Length Of Gloves Should Be>280 Mm, 11-Thickness At Palm Surface Must Be At Least .15 Mm, 12-Latex Protein Content Must Be <100 Μg / Dm² To Reduce The Allergy ( Sample Test Report Should Be Provided ) , 13-Must Provide The Test Reports For Inspection Of Gloves Regarding Pin Hole Test, Viral Penetration Test. Size 6.5 211 Non-Sterile Surgical Rubber Gloves 7.0 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Penetration Test. Size 7.0 212 Non-Sterile Surgical Rubber Gloves 7.5 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Specification, 5-Anatomic Shape For Easy Fit And Less Fatigue, 6-Think And Beaded Cuff To Reinforce Cuff Area, 7-Tensile Strength Should Met With Bis Standards ( Certificate Should Be Provided ) , 8-Textured Surface For Better Instrument Grip, 9-Pre-Powdered With Usp Bioabsorable Corn Starch, 10-Minimum Length Of Gloves Should Be>280 Mm, 11-Thickness At Palm Surface Must Be At Least .15 Mm, 12-Latex Protein Content Must Be <100 Μg / Dm² To Reduce The Allergy ( Sample Test Report Should Be Provided ) , 13-Must Provide The Test Reports For Inspection Of Gloves Regarding Pin Hole Test, Viral Penetration Test. Size 7.5 213 Non-Sterile Surgical Rubber Gloves 8.0 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Specification, 5-Anatomic Shape For Easy Fit And Less Fatigue, 6-Think And Beaded Cuff To Reinforce Cuff Area, 7-Tensile Strength Should Met With Bis Standards ( Certificate Should Be Provided ) , 8-Textured Surface For Better Instrument Grip, 9-Pre-Powdered With Usp Bioabsorable Corn Starch, 10-Minimum Length Of Gloves Should Be>280 Mm, 11-Thickness At Palm Surface Must Be At Least .15 Mm, 12-Latex Protein Content Must Be <100 Μg / Dm² To Reduce The Allergy ( Sample Test Report Should Be Provided ) , 13-Must Provide The Test Reports For Inspection Of Gloves Regarding Pin Hole Test, Viral Penetration Test. Size 8.0 214 Nuprep Skin Prepping Gel ( Used For Vep, Baer, Psg Tests ) 114 Gms 215 Onlay Dural Graft Duragen Plus Ultra Pure Dural Regeneration Collagen Matrix 1 Inch X 1 Inch 216 Onlay Dural Graft Duragen Plus Ultra Pure Dural Regeneration Collagen Matrix 2 Inch X 2 Inch 217 Onlay Dural Graft Duragen Plus Ultra Pure Dural Regeneration Collagen Matrix 3 Inch X 3 Inch 218 Oral Care Kit For Icu Patient Spatula, Tooth Forcep 219 Oxide Regenerated Cellulose Bactericidal Sterile Absorable Haemostat 2 X 3 ( Box Of 12Nos. ) 220 Oxygen Mask ( Paediatric ) Latex Free Soft Transparent Mask With Soft Elastic Strap, Kink Resistant Tubing, Unobstructive Oxygen Flow, Adjustable Nose Clip. 221 Oxygen Mask Plain ( Adult ) Latex Free Soft Transparent Mask With Soft Elastic Strap, Kink Resistant Tubing, Unobstructive Oxygen Flow, Adjustable Nose Clip. 222 Oxygen Mask With Nebulizer ( Disposable ) - Adult Single Use Presterilised Nebulizer Chamber, Create Consistant Particles Of Optimal Therapeutic Use, Easy Seal, Quarter Locking Cap, Anti Spill To Prevent Leakage, Fits With Oxygen Mask, Patient End Should Be Angled So That Patient Can Be Nebulised In Sitting As Well Lying Position. 223 Oxygen Mask With Nebulizer ( Disposable ) - Paediatricsingle Use Presterilised Nebulizer Chamber, Create Consistant Particles Of Optimal Therapeutic Use, Easy Seal, Quarter Locking Cap, Anti Spill To Prevent Leakage, Fits With Oxygen Mask, Patient End Should Be Angled So That Patient Can Be Nebulised In Sitting As Well As Lying Position. 224 Oxygen Mask With Reserviour Bag Endo Treacheal Tube With Suction Port Oxygen Mask Attached With Reservior 225 Pain Management Infusion Pump Multi Rate Elastomeric Pump - Single-Use, Portable Infusion Pump With Flow Rate Accuracy Of ±10%, Air-Vent Blue End Cap With 0.2Μm Hydrophobic Membrane Forces Air Bubbles Out, While Preventing Medication From Flowing Out, Micro Iv Filter That Has 1.2Μm Hydrophilic - 0.2Μm Hydrophobic Membranes That Expel The Particles And Air From The Infusion Line. Available In Nominal Volume Of 100Ml, 275Ml, Available With 2 Flow Rates Of 1-7Ml / Hr& 2-14Ml / Hr.Sterile Pack Ce Approved. 226 Percutaneous Tracheostomy Set Size-7.0 No., Scalpel, Widebore Canula, 10Ml Syringe, Cuffed Adjustable Fiange Tracheostomy Tube, Inner Cannula With Hole, T.T Introducer, Graduated Dilator, Curved Forceps For Dissection, Guide Wire & Introducer. 227 Pillow Cover Disposable, Non-Woven Fabric, 100% Cotton Fabric White, Length 750, Width 450, Depth Of Inner Flap 150 228 Plastic Apron Washable, Good, Quality Plastic, Reusable 229 Polygalactin 910 90 Cm 1-0 40Mm 1 / 2 Circle Round Body, Box Of 12 230 Polygalactin 910 70 Cm 3-0 20 Mm 1 / 2 Circle Round Body, Box Of 12 231 Polygalactin Braided Coated 2-0 Curved Round Body 30 Mm 1 / 2 Circle, Box Of 12 232 Ppe Kit Components Of Ppe Kits: Coverall, Triple Layer Medical Mask, Face Shield, Gloves, Shoe Cover, Disposable Bag. Coverall: Minimun Length Should Be 180 Cm And Chest Circumference Should Be At Least 135 Cm, Disposable, Full Sleeved Complete Suit With Hood, Non-Voven Fabric, It Should Exceed Iso Certified, Should Pass Synthetic Blood Peneteration Test At Sitra. Triple Layer Medical Mask: Non-Voven Fabric, Each Layer Of 25 Gsm With Middle Layer Snow White, Should Have Nose Piece, Isi Specification Or Equivalent. Face Shield: Fog Resistant, Clear Visibility, Complete Covers The Sides And Length Of The Face, Adjustable Band To Attach Firmly Around The Head And Fit Snuggly Against The Forehead. Gloves: Disposable, Pre-Sterilized, High Quality Latex, Stretchable, Thin, Translucent, Puncture Proof. Shoe Cover: Disposable Same Fabric As Coverall, Should Be Impermeable, Free Size With Elastic Band. Disposable Bag: Red Colour, Should Be Supplied With A Zip Lock / Double Tape / Rope Bio Hazard Disposable Bag To Accomodate All The Kit Contents For Safe Disposal. 233 Proseal Laryngeal Mask Airway Size 2 234 Proseal Laryngeal Mask Airway Size 3 235 Puncture Proof Container For Glass Sharps 1.5 Litre Capacity, Puncture Proof, Leak Proof, Temper Proof Container Of Blue Colour With Biohazard Symbol 236 Puncture Proof Container For Glass Sharps 5 Litre Capacity, Puncture Proof, Leak Proof, Temper Proof Container Of Blue Colour With Biohazard Symbol 237 Puncture Proof Container For Glass Sharps 1.5 Litre Capacity, Puncture Proof, Leak Proof, Temper Proof Container Of White Colour With Biohazard Symbol 238 Puncture Proof Container For Glass Sharps 5 Litre Capacity, Puncture Proof, Leak Proof, Temper Proof Container Of White Colour With Biohazard Symbol 239 Raney Clip Adult, Large Size Presterilized 240 Raney Clip Paediatric, Small Size Presterilized 241 Raney Clip ( Adult ) Applicator Instrument ( Leroy Scalp Clip Applying Forceps ) Applying And Removing For Scalp Hemostatic Clip Avn-Na-003-A Length 184 Mm 242 Raney Clip ( Paed. ) Applicator Instrument ( Leroy Scalp Clip Applying Forceps ) Applying And Removing For Scalp Hemostatic Clip Avn-Na-003-A Length 184 Mm 243 Respiratory Exersizer Pyrogen Free, Mon-Toxic, Transparent Material, 3 Chamber Of 600, 900, 1200 Mls Inhaling Volume, Three Color Coded Balls, Light Weight, Compact, Connecting Tube With Mouth Piece. 244 Sample Transportation Box For Safe Transportation Of Blood & Urine Samples, 5 Kg Capacity, Plastic 245 Sanitary Gloves 7.0, Good Quality 246 Sanitary Pads Self Sticking ( Packet Of 20 Pads. ) 247 Scalp Vein Needle ( Disposable ) 26G Needle With Attached Cannula; Butterfly Style For Blood Collection 248 Shoe Cover Disposable 249 Shoe Cover Long Non Woven Polypropylene, 39 Gsm, Colour Blue, Skid Resistence, Dust Proof, Well Stitched In Universal Regular Size 250 Sigma Gel Used For Ncv Test 250 Gm Tube 251 Silk 2-0 Reverse Cutting, Curved1 / 2 Circle ( Box Of 12 Foil ) 252 Silk 3-0 Curved Round Body, 1 / 2 Circle 16 Mm ( Box Of 12 Foil ) 253 Silk Thread No.1, To Be Used For Shunt Introducer 254 Socks For To Prevent Deep Vein Thrombosis Good Quality Of Elasticity Size- Large 255 Socks For To Prevent Deep Vein Thrombosis Good Quality Of Elasticity Size- Medium 256 Socks For To Prevent Deep Vein Thrombosis Good Quality Of Elasticity Size- Small 257 Sodalime White, 5 Litre Plastic Bottle Canister 258 Sodium Hypochloride 10% Pack Of 5 Litre Cane 259 Spinal Anesthesia Drape Disposal, With Round Hole In Mid Of Sheath And Adhessive Around It To Adhere To Skin. 260 Stealate Large Size, Malleable, Metal With Pvc Sheath, Sterile, Length-225-365Mm. 261 Stealate Medium Size, Malleable, Metal With Pvc Sheath, Sterile, Length-225-365Mm. 262 Stealate Small Size, Malleable, Metal With Pvc Sheath, Sterile, Length-225-365Mm. 263 Sterile Evacuated Blood Collection Tube ( Plastic ) With Powdered Sodium Fluoride + Na2edta For Glucose Estimations From Plasma Tube Size 13Mm X 75Mm With 2 Ml Draw Volume. 264 Sterile Evacuated Blood Collection Tube ( Plastic ) With 3.2% Buffered Sodium Citrate For Coagulation Study Tube Size 13Mm X 75 Mm With 2.7 Ml Draw Volume. 265 Sterile Evacuated Blood Collection Tube ( Plastic ) With Acrylic Gel & Clot Activator For Serum Chemistry Determination Tube Size 13Mm X 100 Mm With 5 Ml Draw Volume 266 Sterile Evacuated Blood Collection Tube ( Plastic ) With Clot Activator For Serum Chemistry Determination Tube Size 13Mm X 75Mm With 4Ml Draw Volume 267 Sterile Evacuated Blood Collection Tube ( Plastic ) With K2 Edta ( 3.6 Mg ) Spray Dried For Hematology Estimation Tube Size 13 Mm X 75 Mm With 2 Ml Draw Volume 268 Sterile Paper Roll Size 200 Mtr X 300 Mm 269 Sterile Paper Roll Size 300 Mtr X 400 Mm 270 Sterile Paper Roll Size 250 Mtr X 200 Mm 271 Sterile Paper Roll Size 400 Mtr X 200 Mm 272 Sterile Surgical Rubber Gloves 6.5 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength 273 Sterile Surgical Rubber Gloves 7.0 Penetration Test, 14-Sterilized With Gamma Irradiation / Eo Gas. Size 7.0 274 Sterile Surgical Rubber Gloves 7.5 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Specification, 5-Anatomic Shape For Easy Fit And Less Fatigue, 6-Think And Beaded Cuff To Reinforce Cuff Area, 7-Tensile Strength Should Met With Bis Standards ( Certificate Should Be Provided ) , 8-Textured Surface For Better Instrument Grip, 9-Pre-Powdered With Usp Bioabsorable Corn Starch, 10-Minimum Length Of Gloves Should Be>280 Mm, 11-Thickness At Palm Surface Must Be At Least .15 Mm, 12-Latex Protein Content Must Be <100 Μg / Dm² To Reduce The Allergy ( Sample Test Report Should Be Provided ) , 13-Must Provide The Test Reports For Inspection Of Gloves Regarding Pin Hole Test, Viral Penetration Test, 14-Sterilized With Gamma Irradiation / Eo Gas. Size 7.5 275 Sterile Surgical Rubber Gloves 8.0 1-Disposable, Paired, Pre-Powdered Gloves, 2-Made Up Of High Strength Natural Rubber Latex, 3-Should Be Ce / Iso / Tuv / Fda And Should Meet International Norms, , 4-Should Conform Astm D3577 And En455 Specification, 5-Anatomic Shape For Easy Fit And Less Fatigue, 6-Think And Beaded Cuff To Reinforce Cuff Area, 7-Tensile Strength Should Met With Bis Standards ( Certificate Should Be Provided ) , 8-Textured Surface For Better Instrument Grip, 9-Pre-Powdered With Usp Bioabsorable Corn Starch, 10-Minimum Length Of Gloves Should Be>280 Mm, 11-Thickness At Palm Surface Must Be At Least .15 Mm, 12-Latex Protein Content Must Be <100 Μg / Dm² To Reduce The Allergy ( Sample Test Report Should Be Provided ) , 13-Must Provide The Test Reports For Inspection Of Gloves Regarding Pin Hole Test, Viral Penetration Test, 14-Sterilized With Gamma Irradiation / Eo Gas. Size 8.0 276 Suction Catheter Plain Fg-10 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Coned Distal End With Two Lateral Eyes, X-Ray Opaque Line, Color Coded. 277 Suction Catheter Plain Fg-12 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Coned Distal End With Two Lateral Eyes, X-Ray Opaque Line, Color Coded. 278 Suction Catheter Plain Fg-14 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Coned Distal End With Two Lateral Eyes, X-Ray Opaque Line, Color Coded. 279 Suction Catheter Plain Fg-16 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Coned Distal End With Two Lateral Eyes, X-Ray Opaque Line, Color Coded. 280 Suction Catheter Plain Fg-18 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Coned Distal End With Two Lateral Eyes, X-Ray Opaque Line, Color Coded. 281 Suction Catheter Plain Fg-8 Non-Toxic, Non Irritant Medical Graded Pvc / Silicon, Coned Distal End With Two Lateral Eyes, X-Ray Opaque Line, Color Coded. 282 Suction Drain 500 Ml 283 Surgeons Blade Size 11 No. 284 Surgeons Blade Size 12No. 285 Surgeons Blade Size 15No. 286 Surgeons Blade Size 20No. 287 Surgeons Blade Size 22No. 288 Surgeons Blade Size 23No. 289 Surgeons Blade Size 24No. 290 Surgeons Cap Disposable, Non-Woven Breathable Material, Fits All Shapes, Breathable, Offers Comfortable Seal Around, Preventing Contamination By Any Loose Hair Or Dead Cells And Tissues From Scalp. 291 Surgeons Masks Tie On Mask Made Of Non-Woven Hypoallergenic 3 Ply Construction With Filter In-Between Offering >99% Bacterial Filtration Efficiency . Mask Should Have Nose Pin. 292 Surgical Spirit Isopropyl Alcohol 70%, 500 Ml Bottle 293 Surgical Sterile Gown Porus, Blue Coloured, Sterile Single Packing For Neuro Surgical Procedure. 294 Thermameter Digital, Isi Marked 295 Thread ( Roll ) Thick Thread To Be Used For Tying Articles During Autoclaving, 20 Meter Length. 296 Three Way ( Cannula ) Pyrogen Free Non-Toxic Medical Grade Material, Through Hole Stop Cock, Should Withstand A Pressure Of 40 Psi, Tyvek Paper Packing. 297 Three Way Connector With Extension Cord-200 Mm Made Up Of Non-Toxic Non Pyrogenic Medical Grade Material, Built In 3 Way Stop Cock, Male Luer Lock At Other End. 298 Tissue Paper Roll 54 Mtr Ply, Soft / Highly Absorbent 299 Tongue Depressor ( Disposable ) Wooden 300 Torniquet Length 400Mm ±1 Mm, 25 Mm ±1 Mm, Latex Free, Mannual With Buckle Of Any Colur ( Black / Blue ) 301 Total Silicon Foleys Cathether For Prolonged Urinary Drainage Size Fg-12 302 Total Silicon Foleys Cathether For Prolonged Urinary Drainage Size Fg-14 303 Total Silicon Foleys Cathether For Prolonged Urinary Drainage Size Fg-16 304 Total Silicon Foleys Cathether For Prolonged Urinary Drainage Size Fg-18 305 T-Piece With Suction Port, Humidifier Bottle, For Weaning From Mechanical Ventilation, One End Of T-Piece Should Be Attachable, Second One Open End And Third For Connection With O2 Source, Extension Tube. 306 Tracheostomy Tube Cuffed: 6.5 Non-Plastic, Implanation Tested, Siliconized Pvc Tubes With Radio-Opaque Line. Soft Flanges With Holes For Fixation Tape, Cuff-Tapered Membrane Cuff, Low Pressure Cuff, Large Resting Diameter Must Have Sensitive Pilot Balloon And Indicates Cuff Pressure. Patient End Of The Tube Smooth And Rounded With An Inner Tube Not Entended More Than 1.5 Mm Beyond Patient End. Air Flow Rate In Pressure Of 1 Cm H2o & 5 Cm H2o Presterilized. 307 Tracheostomy Tube Cuffed: 7.0 Non-Plastic, Implanation Tested, Siliconized Pvc Tubes With Radio-Opaque Line. Soft Flanges With Holes For Fixation Tape, Cuff-Tapered Membrane Cuff, Low Pressure Cuff, Large Resting Diameter Must Have Sensitive Pilot Balloon And Indicates Cuff Pressure. Patient End Of The Tube Smooth And Rounded With An Inner Tube Not Entended More Than 1.5 Mm Beyond Patient End. Air Flow Rate In Pressure Of 1 Cm H2o & 5 Cm H2o Presterilized. 308 Tracheostomy Tube Cuffed: 7.5 Non-Plastic, Implanation Tested, Siliconized Pvc Tubes With Radio-Opaque Line. Soft Flanges With Holes For Fixation Tape, Cuff-Tapered Membrane Cuff, Low Pressure Cuff, Large Resting Diameter Must Have Sensitive Pilot Balloon And Indicates Cuff Pressure. Patient End Of The Tube Smooth And Rounded With An Inner Tube Not Entended More Than 1.5 Mm Beyond Patient End. Air Flow Rate In Pressure Of 1 Cm H2o & 5 Cm H2o Presterilized. 309 Tracheostomy Tube Cuffed: 8.0 Non-Plastic, Implanation Tested, Siliconized Pvc Tubes With Radio-Opaque Line. Soft Flanges With Holes For Fixation Tape, Cuff-Tapered Membrane Cuff, Low Pressure Cuff, Large Resting Diameter Must Have Sensitive Pilot Balloon And Indicates Cuff Pressure. Patient End Of The Tube Smooth And Rounded With An Inner Tube Not Entended More Than 1.5 Mm Beyond Patient End. Air Flow Rate In Pressure Of 1 Cm H2o & 5 Cm H2o Presterilized. 310 Tracheostomy Tube Cuffed: 9.5 Non-Plastic, Implanation Tested, Siliconized Pvc Tubes With Radio-Opaque Line. Soft Flanges With Holes For Fixation Tape, Cuff-Tapered Membrane Cuff, Low Pressure Cuff, Large Resting Diameter Must Have Sensitive Pilot Balloon And Indicates Cuff Pressure. Patient End Of The Tube Smooth And Rounded With An Inner Tube Not Entended More Than 1.5 Mm Beyond Patient End. Air Flow Rate In Pressure Of 1 Cm H2o & 5 Cm H2o Presterilized. 311 Transparent Dressing 6 Cm X 7 Cm For Cannula Fixation 312 Transparent Dressing 4 X 2.5 For Fixation Of Arterial Cannula And Central Line. 313 Tube Fixation Device With Soft Cushion & Tube Fixation Tap ( Elastic Type ) . 314 Ultrasound Jelly 200 Ml Bottle 315 Urinal Plastic, Good Quality 316 Urinary Bag With Non-Return Two Valve And Drainage Outlet With Super Smooth Kink, Resistant Tube, Efficient Non Return Valve, Enlarged And Tapered Connector, Moulded Handle To Keep Tube In Upright Position, Capacity At Least 2000 Ml. 317 Urinary Bag With Non-Return Two Valve And Drainage Outlet With Measuring Chamber Non-Irritant Non Pyrogenic Pvc / Material, Distal End Is Coned Having Stainless Steel Balls Sealed Into Tube, Radio Opaque Line. 318 Urine Sample Collecting Container With Screw Cap 60 Ml Capacity, Autoclavable, Plastic 319 Vein Finder Device For Obese, Dehydrated Low Bp, High Truman And Emergency, Thz, Led Advance Transilluminator Technology On-Off Sliding Buttom, 3 Intensitymode Plastic Body 320 Vein O Line 200 Cm 321 Venti Masks -Adult Fixed Orifice, 7 Different Color Coded Connectors From 24-60%, With Markings Of Required O2 Flow In Lpm Along With Percentage Achieved Through It. Adult Sizes. 322 Ventilator Circuit With Water Traps Adult, Single Trap, Disposable 323 Ventilator Circuit With Water Traps Paediatric, Single Trap, Disposable 324 Ventilator Circuit With Water Traps Adult, Double Trap, Disposable 325 Ventilator Nebulizer Chamber With Tubing Adult Size 326 Ventriculoperitoneal Shunt Slit N Spine Low Pressure 327 Ventriculoperitoneal Shunt Slit N Spine Medium Pressure 328 Water Mattress Isi Mark, Standard Size, Qood Quality 329 Water Proof Labels Approx. 1X1 330 Water Proof Labels Approx. 1X3 / 4 331 Water Proof Labels Approx. 2 X 2 332 Wrist Splint In Adult Size To Prevent Hemotoma In Wrist Joint 333 Wrist Splint In Paediatric Size To Prevent Hemotoma In Wrist Joint 334 Yankaur Suction Set Suction Tube With Handle; Length-2.5 Mtrs 335 Zig-Zag Cotton Roll Sterile, 500 Gm Pack 336 Zinc Oxide Adhesive Plaster 50 Mm X 10 Mtr ( Adhesive ) 337 Zinc Oxide Adhesive Plaster 50 Mm X 5 Mtr ( Adhesive )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 28
Delhi View Result →
43.
Educational and Research Institute #8836836 Technical Bid
Establishment of State -of -Art Soil-Water Testing Facility and Service Centre -Purchase Goods , Particulars , Milliporewater Purifier: The System Should Produce Pure Grade Water Directly From Potable Water Feed. The System, Delivering Astm Type I And Iii Water, Can Be Directly Connected To The Available Potable Water Supply. System Should Contain Inbuilt Prefiltration Containing 0.5Um Filter, Silver Impregnated Activated Carbon ( To Avoid Bacterial Growth ) And Polyphosphate Granules Anti-Scaling Compound For Removal Of Hardness From Feed Water. System Should Include Reverse Osmosis With Conductivity Sensors Before And After The Membrane To Ensure The Quality Of Purification. Reverse Osmosis Should Have A Maximum Water Recovery Of Upto 20%. • Total No. Of Conductivity Cells In The System : Four Units • 3 – Way Solenoid Valve : 2 Units • Ro Reject Recovery Loop Available To Minimize Tap Water Usage. Recovery Upto 66%. • Rfid Tag For Automatic Traceability Of New Consumables In The System’S Memory To Ensure On-Time Reordering Of The Pre-Treatment Consumables, The System Should Have Automatic Warnings And Alarms Regarding The Water Quality.Type Iii Product Water Quality:, Ions Rejection : 97 To 98 % With New Ro Cartridge., Organics Rejection : > 99 % For Mw > 200 Dalton, Particulates & Bacteriarejection : > 99 %., Flow Rate : 8 Lt / Hr. The System Should Be Quoted With Proper Prefilter & Iron Removal Filter. Both Of These Have To Be Provided By The Same Company Who Manufactures The Water System.Prefiltration System:A Two-Stage Purification 5 Micron And 1 Micron Polypropylene Graded Density Wrapped Type Depth Filter With Low Voltage 20 Watts Powered Dc Pump With Noise Levels Of 50 Db Prefilter Should Be Attached With Tap Water. And• The Unit Shall Comprise Of Diaphragm Pump With Inter Connections And Built-In Pressure Sensor Ensuring Continuous Monitoring Of Cartridge Life.• System Shall Operate At Minimum Inlet Pressure Of 0.5 Bar And Maximum Of 1 Bar. • System Shall Deliver Water At The Outlet At A Minimum Pressure Of 2.6 Bar Till A Maximum Of 2.8 Bar.• System Can Handle Feed Water With Tds As High As 5000 Ppm And Sdi Upto 50.• It Protects The Water Purification System Downstream. Iron Removal Filter:The System Is Connected With Back Wash Able Iron Removal Filter To Deliver 0.1 Ppm Out Put. Feed Water Quality :-Potable Tap Water, Conductivity :< 2000 ?S / Cm., Ph : 4-10, Total Chlorine : < 3Ppm.Fouling Index : < 12., Feed Water Toc : < 2000 Ppb Pe Reservoir With Vent Filter: Blow Moulded Pe Reservoir With 50 L Capacity With Sensor Rod Float Switch With A Vent Filter To Resist Airborne Contamination Consisting With 0.65 Micron Filter, Activated Carbon And Sodalime For The Removal Of Particulates, Co2, N2 Etc.The System Produces Type I Water Suitable For Molecular Biology, Pcr, Hplc & Other Critical Applications. Type Igrade Product Waterspecifications: Resistivity:18.2Meg Ohm.Cm ( @ 25 Degree C ) , Toc : < 5 Ppb , Bacteria :< 0.1 Cfu / Ml , Pyrogen : <0.001Eu / Ml, Flow Rate : 2 L / Min, Particulates> 0.22U:<1 P / Ml , Rnase: <0.01 Ng / Ml, Dnase: 4 Pg / Ul Company Must Provide Ce, Cul, Valid Iso And Certificate Of Conformity. Warranty For A Period Of 12 Months From The Date Of Installation. The System Contains A Built-In-Dual Wavelength Photooxidation Uv Lamp ( 185 & 254 Nm ) . The Lifetime Of Uv Lamp Is Two Years. To Support Lifetime Of Uv Lamp, Original Literature From Company Is To Be Submitted Without Fail.There Must Be Minimum 200 Systems Installations In & Around Kolkata At Leading Depts. Of State Govt. Institute, Central Govt. Research Institutes, Industry In West Bengal.And Company’S Own Service Team Must Be Based In Kolkata. Engineers Should Be Well Trained By The Company Itself On Water Purification System. They Only Provide Service Whenever Needed. Suitable Filters Should Be Included Wherever Required. Suitable Distribution Pump, Booster Pump For Pumping Feed Water To The Main Unit From Storage Tank. Final Filter Is 0.22 Un. Prefiltration Cartridges Are To Be Supplied For One Year. In Case, The System Is Having Patented Technologies In It, Certificate With Patent Details Should Be Submitted For Proprietary Item. Systems Consumables Traceability Via Rfid Tag Technology. All Water Purification Cartridges And Point-Of-Use Filters Will Have A Built-In Rfid Tag To Ensure Proper Installation Location, Note Installation Date, And Track Volumes Of Water Passed Through The Purification Element. Supporting Documents Wherever Required And Original Catalogue Should Be Provided To Validate Specifications. To Verify The Above Technical Specification Provided Catalogue & Flow Schematic Must Match On Their Global Website For Quoted Model. , Microwave Digestionsystem : Microwave Digestionsystem Capable Of Simultaneous Processing Of Multi Reaction Vessels For Digestion All Kind Of Samples Using All Types’ Acids Including Hf Through Pressure Active Control On Reference Vessel With Pressure Rate Increase Control And Direct Temperature Control On All Vessels. Loading Of Vessels: Top Loading With Hardware And Software Safety Interlocks. Sample Vessels Should Be Inserted Individually From Top For Easy Sample Access. Cavity And Lid : Stainless Steel Construction With Heat-Bonded Fluoropolymer ( Pfa - Perfluoro Alkoxy ) Coating. System Control And Interface : Touchscreen Control, Inbuiltsoftware, Memory Formethodparametersanddigestiondata With Usb Interface, Software: Built-In Software Featuring Screen Display Of Temperature, Weight, Method Search, Power Profile, Method Set Up, Cook-Book Methods For Various Matrices, Graphic Display Of Routine Operations Etc. System Should Have Option To Operate Using Pc. Software Should Have Separate User Login And Admin Login To Secure Method Developed. Digestion Vessels: • Vessels Should Bemadefrommassive Tfm Or Ptfe-Tfm For Easy Handling.• The Rotor Should Have Capacity Of 16Or More Vessels To Run Samples In Same Batch / Run.• Volume Of Vessel Should Be 75Ml Or More• Vessel Operating Pressure Should Be High Up To 100 Bar Or Better• Vessel Operating Temperature Should Be Up To 2600 C Or More. Microwave Oven: • The System Should Have Poweroutput Of1500w Or More Using Dual Magnetrons 2000W From 2 Magnetrons ( 2 X 1000W ) • System Should Have Circularoven Forhomogeneousirradiation With Pfa-Coating For Corrosionprotection &Gas Collectionsystemforprotectionfrom Reactiongases. • Built-In Integrated Cooling System For Removal Of Gases ( Vapours ) And Cooling Of Vessel Without A Use Of External Chiller / Thermostat In Less Than 20 Minutes, Reaction Control:• The System Must Have Direct Temperature Control In Real-Time, Measures The Actual Sample Temperature In Each Individual Vessel Quipped With Floor Mounted Ir Sensors.• The System Should Pressurecontrolsensor For Reference Vesselinrealtime.• The Temperature And Pressure Sensors Supplied Should Be Maintenance-Freewithoutcable Connections. Temperature Measurement: Measurementrangeambient To 250Oc Or More, Pressure Measurement : Measurementrange0 To 40Bar Or Better, Contact-Free, Optical Sample Pressure Measurement, Safety Features : • Interlocks To Avoid Opening Of Vessels During Hot Condition • Release Of Over Pressure To Protect Vessels From Damage. • The System Must Have Automaticsafety Shut-Down Atoverheat / Overpressure. Safety And Emc Emissions Compliance Warranty Details: One Year Standard On-Site Warranty From Date Of Installation , Input Power Supply: 230-240 V, 50 / 60 Hz , Centrifuge Machine : Microprocessor Research Centrifuges … • Centrifuge Rotors & Carriers Are Suitable For Use With Variety Of Falcon & Vacutainer Tubes, • Soft Touch Keypads For Fast And Accurate Setting Of Run Parameters. Basic Runs Are Easy With Setting Of Speed, Time, Temperature, Brake, Press Start Key And Compufuge • Brushless Induction Motor With Frequency Drive & Unique Automatic Rotor Identification Ensuring Accurate Speed Setting For Individual Rotors. Over Current Overheating Safety Cutoff Circuit Is Provided For Motor Protection. • Safety Lid Interlock On The Centrifuge Ensuring That The Rotor Does Not Run With Lid Open While The Lid Cannot Be Opened Unless Rotor Comes Complete Halt. • Max. Speed 20000 • Max. Rcf 37540 • Max. Tube Size 100 • Max. Capacity 400 • W X D X H ( Mm ) 400 X 500 X 440 Essential Features: • User Friendly Microprocessor Control With Led Display • Menu Driven Ten Programme Memory • Choice Of High Brake, Low Brake And Coasting • Imbalance Detector With Auto Cutoff • Safety Lid Interlock To Prevent Cover Opening During Centrifugation • Automatic Unique Safety Rotor Identification System • Speed Holding Accuracy 100 Rpm • Self- Diagnosis For Errors Four ( 4 ) Years On-Site Warranty From The Date Of Installation Iso 9001-2015 Certified , Environmental Shaker : Orbital Shaking Incubators Salient Features: • Brushless Induction Motor With Variable Frequency Drives Suitable For Continuous Operations• Step Less Variable Frequency Drive Ensures Gentle Shaking Start And Maintains Set Speed• Counter Balanced Mechanism For High Stability In Uneven Load Of Different Sized Flasks• Universal Shaking Platform To Accommodate Different Sized Assorted Flasks• Maximum Shaking Capacity – 9 Flasks X 2000 Ml• Powerful Fan Motor For Forced Air Circulation To Maintain Uniform Conditions Inside Chamber • Machine Filled Cfc Free Puf Insulation To Eliminate Void Pockets• Unique Design Of Thermal Barrier For Better Energy Efficiency• Heating By Long Ss Tubular Heaters• Additional Tray To Store Samples• Chamber Calibration Port On Side • Hermetically Sealed Compressor With Cfc Free Refrigerant ( Cis-24 Plus ) • Microprocessor Controller With 4” Lcd Display For Display Of Shaking Speed & Temperature• 9 Programes Memory• High Temperature Safety Cut Off & Alarms For High / Low Set Temperature• Electrical Circuit Breaker• Time Delay For Compressor Switch On ( Cis-24 Plus ) • Overload Cut Off Relay For Compressor ( Cis-24 Plus ) • Rounded Inner Chamber For Easy Cleaning• Attractive Door Profile• Weight Carrying Capacity Of Each Tray : 30 Kg Uniformly Distributed• Auto Door Closer• Smart Handle With Led Door Closure Indication• Four ( 4 ) Years On-Site Warranty From The Date Of Installation, Desirable Features: ( I ) Touch Screen Display ( Tft ) With Additional Features ( Ii ) Validation Protocol With Iq, Oq, Pq Documentation ( Iii ) Port For Calibration Probes / Safety Back Up Iso 9001-2015 Certified Temperature Range & Accuracy: 5 C To 60 C + 0.5 C, Internal Volume ( Liters ) : 215, Platform Size: 580Mm X 600Mm, Maximum Shaking Capacity ( Volume X No. Of Flasks ) : 100Ml X 49, 150 Ml X 33, 500Ml X 24, 1000Ml X 15, 2000 Ml X 9, Shaking Speed Range ( Rpm ) : 20 To 250, Shaking Ampiltude: 25 Mm, Internal Dimensions W X D X H ( Mm ) : 660 X 765 X 650, External Dimensions W X D X H ( Mm ) : 800 X 1150 X 1300, Temperature Control: Microprocessor With Pt- 100 Sensor, Display: 4 Lcd Screen, Large Size Display For Ease Of Reading, Power Failure Alarm: Audio Visual Alarm, Door Open Alarm: Audio Alarm In Case Door Open For Over One Minute, Temperature Variation Alarm: Set Temperature + 2 C, Audio Visual Alarm, Illumination: 8 Watts Fluorescent Tube, Internal Body Material: Stainless Steel - 304 Grade ( Standard Modelas ) , Stainless Steel- 316 Grade ( Gmp Models ) , External Body Material: Power Coated Crca Steel ( Standard Models ) , Satinless Steel – 304 Grade ( Gmp Models ) , Insulation ( Cfc Free Polyurethane Foam ) : 70 Mm Minimum For Body & 80 Mm For Door, Noise Level: Less Than 65 Db ( A ) , Recommended Voltage Stabilizer : Vs02, Warranty: Four ( 4 ) Years On-Site Warranty From The Date Of Installation , Precision Drier: Microprocessor Control Helps In Achieving Precise High Temperature With Forced Convection. • Technical Specifications ( Parameter Wise ) • Internal Dimension ( W × D × H Mm ) 450×400×450 • Chamber Volume ( Litres ) 740×618×630 • Temperature Range Rt+10 ~300 C • Temperature Accuracy 1 C • Display Resolution ±1 C • Timing Range 1~9999Min • Shelves ( Nos ) 2 • Power Consumption 1550W • Electrical Requirements 220V, 50Hz, Single Phase Essential Features • Microprocessor Pid Controller ( With Timing Function ) • Polished Stainless-Steel Chamber With Rounded Corners For Easy & Quick Cleaning • Uniform Distribution Of Air Temperature • Forced-Air Convection • Double Layer Glass Door, Larger Viewing Window Four ( 4 ) Years On-Site Warranty From The Date Of Installation Iso 9001-2015 Certified , 20 Kva Onlineups With Battery Back Up:Src 6000 Uxi Capacity 200Kva, Battery Bank Consists Of 32Nos, Battery Rake, 100 Ah Vrla Battery Exide, 120 Minutes Back Up, 3 Years Warranty , Uv-Vis Spectrophotometer: Microprocessor Based Uv-Vis Spectrophotometer With High Resolution Touchscreen Display, For Operation On 220V / 50Hz. ? Uv-Vis Spectrophotometer Should Have Operating Wavelength Range 190Nm To 1100 Along With On-Board Software For Instrument Operation. ? The Software Should Be Offered With User Friendly Software To Work In Scanning, Wavelength Program, Time-Drive, Rate, Quant, Scanning Quant Modes ? Spectral Bandwidth Should Be Variable From 0.5, 1, 2, 5 & 20 Nm Is Preferred ? Fully Optically Double Beam With Czerny – Turner Monochromator Design And Holographic Grating Of 1200 Lines / Mm With 0.2 M Focal Length Is Preferred. ? Light Source : Deuterium & Tungsten ? Detector – Silicon Diodes Is Preferred ? Scan Speed : Up To 12000 Nm / Min Or More ? Wavelength Accuracy : ± 0.1 Nm Or Better Is Desirable ? Wavelength Reproducibility : ± 0.1 Nm Or Better ? A Stray Light Of <0.01 %T 220, 340 & 370 Is A Must ? Photometric Noise Should Be Less Than 0.00005A Or Better ? Photometric Range : Minimum ± 4 A Or More ? Photometric Accuracy Should Be ± 0.002A Or Better ? Photometric Reproducibility : ± 0.001 Abs Or Better ? Baseline Stability Should Be Less Than 0.0003 Abs / H Or Better ? Cell ( Quartz ) – With Stopper – Volume – 3.5 Ml. – Pack Of 2 To Be Supplied Along With Instrument ? High Sensitivity Matched Pair Silicon Photodiode Detector ? 4 Usb Ports Or More For High Speed Pc And Printer Connectivity, Data Storage And Transfer Through Usb Pen Drive ? The Instrument Should Provide Network Access Via Wireless Connectivity. Data Can Be Transferred To A Pc Via A Network ? Large Sample Compartment Compatible With Wide Range Of Accessories. ? Must Supply One Pair Of 10Mm Path Length Quartz Cuvettes Of 3.5 Ml Volume As A Standard Supply ? The Instrument Must Be Under 3 Years On-Site Warranty From The Date Of Installation The Following Must Be Supplied Along With The Main Instrument: ? One Branded I3 Pc With Original Windows 10 Professional ? One Laserjet Printer Online 1 Kva Ups With 30 Minutes Back Up , Automaticnitrogen Protein Analyzer: A. Speed Digester With Scrubber Digester Unit, Digestion System For 6 Sample Tubes With Adjustable Ir –Heating And Tight Suction Module To Prevent The Escape Of Sulfuric Acid Vapors During Digestion. Robust Design With Stand-Alone Tube Holder Made From Stainless Steel. Complete And Ready-To-Use System Supplied With The Following: • Heating Levels 1 To 10 And Ir Heating Up To 580 °C • The Insulation Tube As Well As The Optimal Designed Heating Chamber Guarantees That The Sample Tubes Are Heated With Optimal Thermal Homogeneity • Sample Tubes 300 Ml ( Diameter 48 Mm ) With Constricted Condensation Zone, Glass Thickness Of 2.3 Mm For Sample Tubes • Tight Suction Module With Included Hose For Scrubber / Water Jet Pump.• Stand-Alone Rack• Water Jet Pump, Plastic• Fast Heat Transfer; Temperature Range 700C To 580 C • Sample Holding Capacity: At Least 6 Nos With 300 Ml• Tight Suction Module To Prevent The Escape Of Sulfuric Acid Vapors During Digestion.Scrubber Unit Environmentally Friendly Neutralization And Exhaust Of Aggressive Fumes, Which Arise During Kjeldahl Or Other Digestions.The System Should Have Following Features - • It Should Operate Without Water-Jet Pump • The Build In Membrane Pump Should Guarantee High Suction Performance Of 32 L / Min. • For More Sensitive Digestions The Suction Capacity Can Be Adjusted In A Typical Range Of 100 – 400 Mbar Below Atmospheric Pressure.• The Two-Step Gas Scrubbing System Consists Of A 3 L Neutralization Step And An Adsorption Step • The Scrubber Should Be Supplied Complete And Ready To Use. B. Automatic Distillation System With Ph Acid Base Titration The System Should Have Following Features - • Detection Range Of 0.02 – 200 Mg / N Or More• Steam Ramps Should Be Available• Naoh Pump• H20 Pump• 7-Inch Touch Display, The Intuitive Touch Screen Provides Fast Feedback And Enables Easy Process Handling.• Recovery Nitrogen:N: >98% With Digestion Process, N: >99.5% W / O Digestionprocess • Integrated Timer • Distillation Capacity ( 100% ) ~ 40 Ml / Min• Efficient Steam Distillation By High-Performance Steam Generator. Adjustable Distillation Power 10 - 100% • Operating Convenience: Compact, Modern, And Functional Design, Stand-Alone Unit Using Minimal Space, Easy-To-Use Keyboard, Clear Led Display• Tap Water Consumption ~ 1.2 L / Min• System Should Store Memory Of 80+ Methods • System Should Store Number Of Determinations Log• System Should Store Number Of Determination Results• Steam Performance -150 Ml / 5 Min, System Should Have Safety Features:• Protection Of Users From Burns At The Splash Protector ( Distillation Area ) , Which Is Hot During Distillation Due To Protective Door.• Prevention Of The Start Of A Distillation With The Protective Door Open And Stop A Running Distillation And The Dosing Of Reagents Immediately When The Protective Door Is Opened During The Process Due To Protective Door Sensor.• Prevention Of The Start Of A Distillation Without A Sample Tube Inserted Due To Sample Tube Sensor.• Prevention Of Electrical Shock During Maintenance With Service Door Sensor / Switch To Disconnect Electrical Power Immediately When The Service Door Is Opened.• Protection Of Glass Parts By Protective Shield ( Cover ) At Condenser Control:• Full Process Visibility, Visual Control, And Close Monitoring Of The Distillation Process Through Glass Splash Protector.• Full Visibility Of Dosing Pumps. • Distillation Area Should Be Visible To Make Method Development Or Trouble-Shooting Easier. • Warranty : 4 Years On-Site From The Date Of Installation ( For Whole Set Up ) Should Have Proof Of Supply Of Atleast 3 Fully Automatic System With Inbuilt Titration.Iso 9001-2015 Certified , Quartz Water Double Distillation Set : Flow Rate: 2.5 Lit / Hr, Primary & Secondary Boiler: Demountable Quartz Boiler With Silicone O Ring Arrangement To Separate Primary Boiler From Secondary Boiler, Easy To Drain: Unit Has Drain Outlet At Bottom Of Primary Boiler For Removing Sediments, Tubing: Silicone Tubing 10Mmidx14mm Od, 10M Long, Power Required: 4.4Kw, 230V, Microbial Activity : Pyrogen Free, Conductivity: Conductivity < 1?S / Cm, Condenser: Quartz Condenser Inlet & Outlet Are At Top For Easy Maintenance Also Additional Cooling Condenser Is Provided At Centre, O / P: 2.5Lit / Hr, Lxbxh Cm: 35X35x100, Daps: Auto Cut-Off Has Buzzer Function & Reset Button, Third Party Test Reports: Govt Testing Certificate For Moc / Third Party Test Reports For Output Water Can Be Shared, Moc: Quartz Boiler And Quartz Condensers, Daps: Auto Off In Case Water Level Falls – Works With Level Sensor, Water Leveller: Sediment Drain Provision With Pinch Cock And Water Leveller Are Connected With “T-Joint” With Primary Boiler, Warranty Documents: 3 Years On-Site Warranty From The Date Of Installation Iso 9001-2015 Certified , Ph-Ec-Ion Meterwith Ionselectiveelectrodes: Specification For Benchtop Ion Meter With Ammonium & Nitrate Electrode Package: Meter Specification: Ise Range: 0.0001 To 19900 ; Resolution: Up To 3 Significant Digits ; Accuracy: ± 0.2 Mv ; Units: Ppm, M, Mg / L, %, Ppb, None; Calibration Points: Up To 5 Points; Calibration Edit: Yes Calibration Feature: Fix Calibration Errors Without Complete Recalibration; Temperature Compensation:-5 To 105 ?C Temperature Resolution: 0.1; Readout:Backlit Graphic Lcd Display; Splash-Proof Rating:Ip-54 Data Logging Point: 2000 Data With Date & Time St Power Input: 220 Vlt Ac Wall Adapter / Optional Battery Operated Facility. Stirrer : Automatic Stirrer Probe Facility Directly Controlled By The Meter. Warranty: 3 Years Replacement Warranty. Certification: Ce & Tuv, Ise Specification: Ammonium Electrode: Plastic Membrane Half Cell With Reference Electrode ; Range: 0.01 To 17000Ppm; Temp Range: 0 To 40°C Nitrate: Module Based Half Cell With Reference Electrode, Range: 0.1 To 14000 Ppm As N Temp Range: 0 To40°C Connector: Bnc Supply Should Include: Supply Should Include Main Benchtop Ion Meter With Electrode Holder & Stand, Nitrate Electrode With Replaceable Module, Reference Electrode, Respective Filling Solution Pack, 300 Ml , Nitrate 1000 Ppm Standard, Suppressor Solution For Ground Water Sample & Isa Solution For Surface Water Sample.And Ammonium Half Cell Electrode With Reference Double Junction Electrode And All Their Respective Filling Solutions; Standards And Isa Solutions Along With Automatic Stirrer Probe Buffer Solutions For Measuring 1000 Samples Must Be Supplied Along With Electrode Warranty: 4 Years On-Site Warranty From The Date Of Installation . Certification: Ce & Tuv Ise Specification: Ammonium Electrode: Plastic Membrane Half Cell With Reference Electrode ; Range: 0.01 To 17000Ppm; Temp Range: 0 To 40°C Nitrate: Module Based Half Cell With Reference Electrode, Range: 0.1 To 14000 Ppm As N Temp Range: 0 To40°C Connector: Bnc .Supply Should Include: Supply Should Include Main Benchtop Ion Meter With Electrode Holder & Stand, Nitrate Electrode With Replaceable Module, Reference Electrode, Respective Filling Solution Pack, 300 Ml , Nitrate 1000 Ppm Standard, Suppressor Solution For Ground Water Sample & Isa Solution For Surface Water Sample.And Ammonium Half Cell Electrode With Reference Double Junction Electrode And All Their Respective Filling Solutions; Standards And Isa Solutions Along With Automatic Stirrer Probe Specification For Benchtop Ph / Conductivity / Tds / Salinity Meter: Ph Range:-2.000 To 20.000; Ph Resolution :0.001Ph Accuracy: ± 0.002 ;Mv Range:±2000.0 Mv; Calibration Features:Fix Calibration Errors Without A Complete Recalibration;Ph Electrode Type :Ph / Atc Triode. Conductivity Range:0.001 ?S To 3000 Ms; Conductivity Resolution / Accuracy:0.001 ?S / 0.5% Of Reading ±1 Digit For Conductivity, Tds & Resistivity; Compatible Cell Constant:0.001 To 199.9; Ph / Cond. Calibration Points:Up To 5 Points; Cond. Electrode Type:Dura Probe Conductivity Cell;Resistivity Range / Resolution:2 Ohm To 100 Meg – Ohm / 2 Ohms-Cm Resolution; Salinity Range / Resolution:0.01 To 42 Ppt Sea Water / 0.01 Resolution; Tdsrange / Resolution :0 To 200 Ppt / 4 Significant Digits; Tds Factor Range:Linear, 0.01 To 10.00; Stirrer Provision ( Optional ) :Direct Control Of Stirrer Probe With Meter. Ip Rating:Ip 54 Rated; Data Logging:2000 With Date And Time Stamp Including Auto Read Function; Power Supply:Universal, Ac Power Adapter, 100-240 Vacand 4 Nos. Aas Battery ( 800 Hrs. ) . Warranty: 3 Years Replacement Warranty , Certification : Ce & Tuv , Laboratory Petty Mechanical / Heating Devices A ) Magnetic Stirrer: • Speeds Range 150-1500 Rpm • Stainless Steel Hot Plate Model For Temperatures Up To 340 C• Ceramic Hot Plate Model For Temperatures Up To 500 C • Easy To Read Backlit Lcd For Display Of Set & Actual Parameters • Monitoring Of Set & Actual Temperature / Speed• High Accuracy Of Temperature Control With Embedded Duel Sensors• Advanced Stirrers With Microprocessor Technology• Constant Speed Even With Change Of Load / Voltage • Maintenance Free Brushless Motor• Scratch Proof & Excellent Chemical Resistance• External Temperature Probe For Control Of Fluid Temperature• Last Parameter Recall, Ideal For Repetitive Processes• Unique Safety Temperature Control System • Settable Safe Temperature Limit To Avoid Overheating• Residual Temperature Warning When Unit Is Switched Off For Operator Safety• Power 1050• Max. Stirring Quantity ( Water ) ( Liters ) 10• Stirring Paddle ( Ptfe Coated ) Q-20A ( 13 X 50Mm ) • Motor Rating Input ( W ) 18• Motor Rating Output ( W ) 10• Speed Range ( Rpm ) 150-1500• Speed / Temperature Display Lcd• Speed Display Resolution ( Rpm ) 1• Top Plate Material Ceramic Glass• Dimension Of Top Plate ( Mm ) 184 X 184• Heating Power ( W ) 1000 • Temperature Range Upto 500 C• Control Accuracy Of Heating Temperature 1 C• Residual Heating Warning Alarm Above 50 C• Control Accuracy Of Heating Temperature With Pt-1000 0.2 C• External Temperature Sensor Pt-1000• Dimension ( Wxdxh ) ( Mm ) 360 X 215 X 112• Protection Class Acc. To Din En60529 Ip 21Warranty: 4 Years On-Site Warranty From The Date Of Installation.B ) Water Bath: • Multipurpose Water Bath With Adjustable Double Line 12 Holes To Hold Different Size• Samples For Easy & Hygienic Heating. Technical Data With Parameter • Temperature Range Rt + 5 C _ 99 C• Temperature Stability +0.5 C• Tracking Alarm +2 C• Chamber Volume 15 Ltrs• Interior Dimension ( W X D X H Mm ) 450X300x110• Timing Range 1~9999Min • Remark Double Lines Six Holes• Electrical Requirements 220V, 50Hz, Single Phase• Power Consumption 1500W Essential Features:• Microprocessor Control With Timing Function• Digital Display• Audible And Visual Alarm For Over Temperaturewarranty: 4 Years On-Site Warranty From The Date Of Installation. C ) Willy Mill Grinder: • ¼ Hp, Chamber Size 40Mmx25mm ( Cast Steel Chamber ) D ) Microwave Oven • Convection, Microwave, 28L Capacity, 1400W E ) E-Burette: Fully Motorized, Touch Screen Control Panel, , Pre Calibrated Dispensing Speed, Capacity 50Ml, Ptfe Piston For Good Chemical Compatibility, Spring Less Valve Assembly, Inbuilt Memory Dor 20 Reading, Computer Connectivity Option With Free Software, Rechargeable Battery, 5 No. Adapters Free Of Cost, Free Spare Usb Cable For Computer Connectivity, Battery Charger, Increment For 10Ml Capacity : 0.005 Ml 25 Ml Capacity : 0.01 Ml 50 Ml Capacity : 0.01 Ml Accuracy ( +, - ) 0.2% Cv ( +, - ) 0.07% Two Years Warranty , Nabl Certificate , Refrigerator : Frost Free Refrigerator With A Capacity Of 415 Liters, Double Door, Smart Inverter With Multi Storage Basket With An Energy Rating Of 4 Stars Or Better, 3 Years Warranty , Ac Machine : Split Type , Capacity Of Ac Units In Tonnage 1.5 With 5 Star Rating, !00% Copper, 3 Years Warranty , Flame Photometer: Microcontroller-Based Unit Designed To Provide Automation In Operation, Measurements And End-Result Presentation. It Can Do The Estimation Of Sodium ( Na ) , Potassium ( K ) , Lithium ( Li ) , Calcium ( Ca ) And Barium ( Ba ) In Single Aspiration Of A Sample. Specifications • Microcontroller Controlled Automation For Ease Of Operation.• Determination Up-To Five Elements With Single Aspiration ( Na, K, Li, Ca & Ba ) .• Unit Of Measurement “Ppm” And “Meq / L” • Suitable For Medical And Industrial Analysis• Calibration Standard Up-To Five Point.• Auto Ignition• Gas Leak Sensor• Auto Gas Cut-Off• Password Protection• Separate Login For Administrator And Guest• Data Processing With Linear Mode Or Quadratic Curve Fitting• Results Of A Measurement Taken Earlier Can Be Recalled And Displayed ( Max. Results Storage: 500 ) • Graphics Lcd Readout ( 240 X 128 Dot ) Lcd Readout For Adequate User Interfaces. • Built-In Real Time Clock For Date And Time.• Centronix Printer Port For Epson Compatible Dot Matrix / Inkjet Printers To Get Hard Copy Of Results ( Printer Optional ) .• Air Compressor With Built-In Air Regulator And Air Filter ( Systronics Model 126 ) .• Pc-Link Software ( Optional ) • Reproducibility: + 1% Fs + 2 Digits In Low Concentration Mode. + 2% Fs + 2 Digit In High Concentration Mode.• Curve Fitting Accuracy : + 2% Fs. ( High Conc. Range ) • Filters ( Regular ) : Na ( 589 Nm ) , K ( 768 Nm ) ; Interference Filters With 10-Nm Bandwidth• Filters ( Optional ) : Li ( 671 Nm ) , Ca ( 622 Nm ) , Ba ( 554 Nm ) Interference Filters With 10-Nm Bandwidth• Separate Channel And Separate Silicon Photodiode ( Detector ) For Each Element.• Minimum Sample: Approx. 3Ml. • Aspiration Time: Five Element Analysis Within 20 Second On Single Aspiration• Operating Air Pressure: 0.45Kg / Cm2 ( Typical ) , Regulated. *• Fuel Gas: Lpg ( Liquid Petroleum Gas ) , Regulated.**• Power Supply: 230V +10%, 50Hz.4 Years On-Site Warranty From The Date Of Installation Elements Minimum Concentration Without Dilution Maximum Concentration ( Without Dilution ) Low Concentration Mode Maximum Concentration ( Without Dilution ) High Concentration Mode Na 0.2 Ppm 10Ppm 100 Ppm, K 0.1 Ppm 10Ppm 100 Ppm, Ca 3.0 Ppm 100 Ppm 300 Ppm, Li 0.1 Ppm 2 Ppm 50Ppm, Ba 50 Ppm500 ( Minimum ) • Minimum & Maximum Are The Limit Of Calibration , Not Measuring Range Elements Serum Urine Bio-Fluids Na 0-200 Meq / L, 1 : 100 Dilution 0-250 Meq / L, 1 : 100 Dilution Upto 250Meq / L , With 1:100 Dilution, K 0-10 Meq / L, 1 : 100 Dilution 0-100 Meq / L, 1 : 1000 Dilution Upto 250 Meq / L, With 1: 100 Dilution, Ca ----- ( Note ) 0-10 Meq / L, 1 : 2 Dilution Upto 250 Meq / L , With 1: 100 Dilution, Li 0-2 Meq / L, 1 : 10 Dilution --------- Upto 250 Meq / L, With 1: 100 Dilution Specification For Compressor • Pressure : Power Supply : • To 1.0 Kg / Cm2 ( Maximum ) 230 V + 10 % • Weight : 6 Kg ( Approx. ) , Digestion Chamber With Heating: Specification Of Digestion Chamber 1 Dimension:1800Mm X 1000Mmx 1200Mm ( L X B X H ) , Working Space:1500Mm X 900Mm ( L X B ) 2 Fume Chamber Should Be Made Of Double Skin Construction Of Frp ( Fibreglass Re-Inforcement Plastic ) , Outside Should Besmooth Finished And Inside Of Fume Chamber Is Mat Finished.Inner Lining Of The F.C. Should Be Compressed Frp Sheet, Lined With F.R.Pof 5Mm Thick Biphenyl A Grade Fume Rate Resin. 3 External Finish Will Be With 1St Class Grade Pigment With Resign 4 Conceal Type Counter Balancing Door With Toughened Glass With Frp Framing 5 Casing Of The Blower Should Be Made Up From Frp. Motor Wattage 0.75Kw, 415V, 3000 / 1420Rpm, Tefc , Type Mn – 16 Dol 415V, 3Phase On / Off Push Bottom Starter 6 Standard Ducting System Of 200 Mm Dia ( 8” ) . Pvc-Rigid Duct.10 M Duct Free With The System. 7 Impeller Of The Blower Should Be Made Up From Frp. 8 Surface Of The Fume Chamber Also Made Fromfrp , Also The Working Surface Is Fire Retardant . 9 The Fume Chamber Will Have Facilities To Mount 02 No. Service Panel With External Control To Operate The Gas, Water Outlet Within The Chamber, Electric Switches, 08Watt Led Daylight Fitted Inside The Chamber. Specification Of Digestion Chamber Fume Purification System Water Scrubber : Vertical Types: 1. Size Of The Water Scrubber Is1000x 800X 1400 ( Lx D X H ) . 2. Frp Make Water Tank Of Capacity 750Ltrs. 2 Nos. 3. Chemical Pump, Capacity- 85 Lpm, H.P. -0.5 1No. All Plumbing Work From Connecting Point. ( Source Of Water ) Specification Of Hot Plate 1.Rectangular In Shape. Body Is Fabricated Out Of Thick Mild Steel Duly Finished In White Powder Coating Paint With Mat Finished Colour Combination. The Hot Plate Made Of Cast Iron Precisely Machined And Smoothed Duly Finished In Heat Resistant Black Paint Is Firmly Mounted On The Body. Heavy Duty Heating Elements Are Securely Laid Under The Plate To Operate On 220 Volts, Ac , 50 Hz . Temperature Is Controlled By Three Heat Rotary Switch / Energy Regulator As Per Demand. Sizes : 36” X 18” Guarantee / Warrantee For All Components: 24 Months From The Date Of Installation
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 21
West Bengal View Result →
44.
Educational and Research Institute #8825445 Technical Bid
Purchase , Particulars , Atomic Absorption Spectrophotometer ( Aas ) : Atomicabsorptionspectrophotometerwithgraphitetubeautomizer ( Gta ) , Flameautomizer ( Fa ) Andvapourgenerationassembly ( Vga ) , Unitforflame ( Airacetyleneandnitrousoxide-Acetylene ) , Chiller, Autosamplersforgtaandflame.: Technical Specification: Atomic Absorption Spectrophotometer: Computer Controlled With Built-Inflame Emission Mode, Wave Length Range: 180 – 910Nmwave Length, Sensitivity: Sensitivityatleast0.35Absfor5µg / Mlaqueouscopperstandardsolutionwithair – Acetylene Flame., Optics: Double Beamholographic Monochromator, Czerny Turner , Focallength: Atleast250mmfocallength, Resolution: 1800Lines / Mm, Slit Width: 0.1Nm, 0.2Nm, 0.4Nm, 1Nm, 2Nm & 5.0Nm ( Six Step Auto-Changer ) , Flame Atomizer: Alltitaniumor Equivalentburnerwithimpactbead / Flowspoiler, Premixdesign, Movement: Automatic Movementintothe Sample Compartment, Affect From Acids, Organic Solvent: Unaffected From Attacks By Acid Solution Or Organic Solvents ( E.G. Methylisobutylketone I.E. Mibk, Flame Alignment In Liquid Beam:Fullyautomatic, Optimizedwithmotorizedburnermountforverticalandhorizontalburneradjustment, Nebulizer:Highprecisionabletoprovidemanuallyadjustableuptakeratesmaterialofthenebulizerandrelatedventurishouldbeinerttoacidsolutionsandorganic Solventssuchasmibk, Flame Control: Computercontrolledignition, Gas Control: Computercontrolledwithoxidantandfuelgasesmonitoringtomonitorconstantfuel / Oxidantrationignition., Safety Function: Interlockingsystem To Preventignition, Essential Interlock Monitor: Burnertypeaswellasitspresenceinposition, Airselector, Flamesensor, Liquidtraplevel, Gassupplypressureandairsupplyanywhere Inthe Networkofgastubings Inthe System, Automatic Lamp Selection Function: Computer Controlled Hollow Cathode Lamp Selection And Alignment, Lamp Holder: Atleast8lampholderwithbuiltinpowersuppliesforhollowcathodelampsandelectrode–Lessdischargelampsorequivalent, Operating Parameter Setting: Automatic Setting, Read Out / Display: Displayfacilityforabsorbanceaswellasconcentration, Displayoferrorsorerrorcodes, Absorbancerangeat Least Upto 2.0 Abs., Scale Expansion: Scale Expansionatleastupto 100X, Integration Time: Integrationtime Shouldcoveratleast0.1To 60 Secondsrange, Measurement: Measurementsofmean, Rsdandcv, Backgroundonlymode, Integration Ofpeakheightandpeakareas.Accessories / Spares With Flame Aasystem, Vapor Generation Assembly: Shouldbecontinuousflowbasedhydride / Mercuryvaporgeneratorwithoptionofusingwithorwithoutaprogra, Mmable Auto Sampler Highly Automatic: After Pressing The Start Key, The Whole, Process ( Sampling, Reacting, Calibrating And Cleaning ) Will Be, Finished Automatically.High Sensitivity: The Sensitivity Of Most Elements Is Better Than 1Ng / Ml / 1%A. Sensitivity Of Arsenic Is Better Than 0.15Ng / Ml / 1%A.Rsd: Less Than 3% Measurement Time: The Single Measurement Will Take 25 To 35 Sec, Less Solution: Sample 2-2.5Ml ( Including Clean ) , Potassium, Borohydride 1-1.5Ml, Carrier Liquid 5-6Ml.Atomizer: Heated Absorption Cell ( Heated By Air-C2h2 Flame In Standard Carrier Gas: Ar Pressure: 0.32 Mpa, Consumption:70 Ml / Min, Power Requirements: 240 Vac, 50 / 60 Hz, Precision: Precisionofbetterthan Oratleast1%Atppblevelsofmercury, Arsenic Etc. Absorption Cell: Theabsorptioncell’Smaterialshouldhavenoeffectofthehighheatof The Flame Andthe Cellforthe Analysis Ofmercuryshouldbeofa Closedabsorptiondesign Flame Arrester: Flamearrestershouldbeprovidedinthetubewhichconnectsthe Assemblyto The Absorptioncell, Cell Design Holder: Thedesignofthecellholdershouldgiveafirmandeasilyadjustable ( Foralignment ) Mountingonthe Burnerhead. System Accessories: Complete Withnecessary Reagentbottles, Connectorsetc.Hollow Cathode Lamps: Arsenic, Antimony, Calcium, Chromium, Cobalt, Copper, Iron, Nickel, Lead, Manganese, Mercury, Tin, Zinc, Molybdenum. Air Compressor With Air Filter Or Equivalent Air Service Unit:Completewithpressureregulatorquiteinoperation, Necessarytubingandconnectorsandshouldmeettheairsupplyrequirements Of Aasoperation.Oil Free Pump: Oil- Free Pumpandmoisture Trap, Corrosion Resistant: Resistanttoacidic Vapourandthedrainvalve ( If Any ) Shouldbemade Of Stainlesssteelof Equivalentcorrosionresistantmaterial Nitrous – Oxide Gas Regulator: Nitrousoxidegasregulator ( Twostage ) Withheater, Withnecessarytubing’Sandconnectors.Necessarytransformershouldbeprovidedto Transformthissupplyto Therequirementsoftheheater.Theheatershouldworkon230±10Volts50hzacpowersupply.Acetylene Gas Regulator: Acetylene Gasregulator ( Twostage ) Withnecessarytubingandconnectors.Nitrogen Gas Regulator: Nitrogenregulator ( Twostage ) Withnecessarytuningsandconnectors.Graphite Furnace System, Graphite Tubeatomizer: Should Becomputercontrolledfullyenclosedgraphitetubesystemconsistingofstabilizedtemperature / Totalpyrolyticgraphite Plateform.Gassupplies: Provisionoftwogassupplies ( Programmeselectable ) Withindependentcontroloverthe Gassupplythroughthe Furnace.Heatingrate: Heatingrate Ofatleast2500°Cpersecond Coolingtime: Coolingtime20seconds Temperature Range: Temperaturerangeambientto 3800°Cor Morein 1°Cincrementsfeedbacksystem: Feedbacksystemforfurnacetemperaturecontrol, Interlocksforwater, Gas, Temperature, Furnacedoor, Graphitetubedamage Andmainspower.Temp.Programming Upto 20 Rdertemperatureprogrammingfacilitywithflexibilityofprogramselection, Ramptime, Gases, Gasflowandreadtriggerforeachtemperature Step.Control Computercontrolledwithappropriateprovisionforprintoutofthe Furnace Andsample Parameters Display Calibrationdata / Graphs, Temperatureprofiles, Signalgraphicsandthe Instrumentstatus. Memory Memoryshouldbe Ableto Storeatleasttwenty Fivenonvolatileprogrammes Chiller Cooling Mode: Compressor Cooling, Temperature Controller: Pid Controller, Temperature Range: 5°C – 35°C, Accuracy: ±1°C, Cooling Capacity: 1300W @25°C, Pump Pressure: =1.3Bar, Pump Flow: =15Litre / Min, Tank Volume: 8 Litre, Tank Material: Stainless Steel Ss304, Refrigerant: R134a Size ( W*D*H ) : 360*450*653Mm, Power Supply: Ac220v, 50 / 60Hz Dataworkstation Application Softwareprogram Facility With Multitasking Software Shouldprovidecompletecontrolofinstrumentwithinstrumentstatusdisplayanditsvariousaccessories. Provide Accurate And Reproducible Time Averaged, Integration, Non – Averaged Integration, Multi Level Calibration. Softwareshouldhandleinstrumentlinearabsorbancereading, Concentration, Oremissionintensity, Integrationtime, Built-Instatistics, Calibrationequationcontrol, Slopeofanalyticalcurveusingoperatorselectivecalibrationstandard Built-Ininterfaceforcomputerconnectionanduseofoptionalaccessories. Comprehensivequalitycontrolprotocolsfacilityincludingblank, Multiplequalitycontrolstandards, Qa / Qcaudittrailandcalibrationfailure. Computer System, Make Reputed Brand, Processor I5 -10Th Gen, Ram 8Gb Or Advance.Ssd 512, Monitor 19”Led, Operation Software: Preloaded Windows Xp Professional Operating System With Licensed Cd Or Better Msoffice2000standardwithmedia, Manualandlicensedcdor Better, Preloaded Antivirus With Latest Version Along With Licensed Cd Or Better Fume Hoodexhaust Fume Hood Made In Stainless Steel Chimney With Std 20Ft Ss304 Powder Coated Exhaust Pipe With Inert Centrifugal Blower 1400Rpm, Ac 230V, With Standard Fitting Installation Hardware For Installation. Operation Kit Standardoperationkitincludingallrequireditems, Tubings, Fittingsforstartup / Regularoperationofinstrumentsuchasgaspurificationsystem To Be Supplied With The System. Operation / Maintenance Manual Operation / Maintenance Manualforeachunit Analytical Manual Analyticalmanualincludingapplicationsforflame, Vgaandgraphite System Operation And Maintenance Training One Weektrainingto Beprovidedtotwo Scientiston Softwaretraining, Operation, Maintenance Andtrouble Shootingaspectsof Instrumentatthe Timeof Installation. , Air Conditioner : Split Ac With Inverter Swing Compressor: Streamer Discharge & Dew Clean Technology For Healthy Air Capacity 1.5 Ton: Suitable For Medium Sized Rooms ( 111 To 150 Sq.Ft ) 5 Star: Best In Class Efficiency Copper Condenser Coil: Better Cooling And Requires Low Maintenance Key Features- Cooling Capacity @ 43°C: 100%; Noise Level: 38 Db ( A ) ; Ambient Operation: 54°C Special Features: 15% Higher Iseer Compared To Base Iseer ( 4.5 ) Of 5 Star Ac; Patented Streamer Discharge For Healthy Air; Intelligent Eye To Adjust Cooling According To Human Presence; Triple Display ( Power Consumption %Age, Set / Room Temperature & Auto Error Code ) ; Dew Clean Technology That Cleans Indoor Unit Coil With A Press Of Button Refrigerant Gas: R32 Environmental Friendly - No Ozone Depletion Potential Indoor Unit, Outdoor Unit, Remote Control, User Manual, Warranty Card & Standard Installation Kit , Bod Incubator: Floor-Standing, Double Doors .Temperature Range 5°C To 80°C With Uniformity Of ±0.2°C @ 10°C. Microprocessor Pid Controller Delivers Superior Temperature Control Accuracy, Required For Precise Results. Features And Advantages Include Illumination Lamp, Caster Wheels For Easy Mobility, Digital Timer . 175Litres / 6.1Cft, External Chamber Ms, Internal Chamber Ss304, Solid Insulated Door ( With Glass & Without Glass ) W / Lock Door, Stainless Steel 5 Shelves Removable, Caster Wheels, Humidity System, Light System By Interior Illumination W / 3 Fluorescent Tubes, Timer 0-99 Hours For Regulating Cycles Illumination Condition, Rfid Enabled Door Locking System. Brand Name And Model Name Must Come In The Display. , Centrifuge: Max Speed: 15000 Rpm Speed Accuracy : ±1Rpm Or ±1 X G Temperature: -10°C To +40°C. Possibility Of Precooling During Standstill Rotor Type: Angle Rotor For Conical Centrifuge Tubes. All Rotors With Lid And Anti-Corrosion Coating Rotor Capacity: 8 X 50 Ml With Max. Rpm:~14000 Rpm 8 X 15Ml With Max. Rpm:~ 14, 000 Pre Selection Of Run Parameters In Terms Of Rpm Timer Range: Pre Selection Of Time From 30Sec. To 10 Hr. Or Continuous Set Time In Hrs:Min, Min:Sec, Or Continuous Mode Automatic Rotor Identification & Imbalance Sensor Low Vibration During The Operation. Extremely Low Noise During Operation ( <66 Db ) . With Microcontroller For Speed, Time And Temperature Motorized Lid Lock And Inter Lock Keys For Start, Stop And Lid Open Power Supply: 230 V / 50-60 Hz , Chns Analyser : Fully Automated Pc Controlled Elemental Analyser For Solid And Liquid Samples.The Analyzer Must Be Able To Simultaneously Determine The Elements In The Following Combinations: Chns, Or Chn, Or Cns, Or Cn, Or Nwithout A Need To Change Column Helium As Carrier Gas And Option For Argon As Carrier Gas In Chns Mode.Sample Weight Range: 0.2 Mg Of Organic Compound To 800 Mg Or More Inhomogeneous Soildetection Range: 0 To 100% For All Elements ( C, H, N, S ) With The Capability Of Measuringat Least 10 Mg Absolute Carbon In Chns Mode And More Than 50 Mg In Cn Mode Standard Deviation: ?0.1% Of Absolute. Lower Detection Limit Of < 50 Ppm For N , C And S With Thermal Conductivity Detector ( Tcd ) Dependingon Sample Weight. The Instrument Must Fulfil The International And National Safety Standards. For Safety Reasons, Theentire Instrument Including Furnaces Must Internally Operate On Low Voltage ( < 50 V ) . Large Dynamic Measurement, Range From 0.1 Milligram, Chemical Substance To1 Gram Inhomogeneous Soil, Best Analysis Results For Any Sample Matrix, Wide Variety Of Optional Configurations, Individually Extendible, Low And Tool-Free Maintenance, Low Noise Level, Low Total Cost Of Ownership, Integrated 120 Position Auto Sampler As Standard, Patented Ball Valve Forblank-Free Sample Transfer. Furnace System • Should Have Two Zone Furnace System, Separate For Combustion And Reduction With Independent Temperature Control For Each Furnace In Chns Mode. Easy Slide-Out Mechanism Of Furnace For Routine Maintenance Work. It Should Be Possible To Set Difference Temperature For Combustion And Reduction. • Controlled Furnace Temperature Should Be 1200 Deg C Or More. • Easy Ash Removal Without Change Of Combustion Tube By Means Of An Exchangeable Ash Crucible. Separation System • Combustion Gases In The Form Co2, H2o, N2 And So2 Are Separated By Means Of Single Temperature Programmed Desorption ( Tpd ) Column. Detector System • Oxygen Intrusion Free Thermistor Technology-Based Temperature Stabilized Tcd Detector For Measurement Of C-H-N-S-O Auto Sampler System • Integrated 50 Or More Position Automatic Sampler Having Capacity To Handle Upto 1000 Mg Sample In Each Sampler Holder Position Of Carousel Software • Should Be Windows Based And Should Have Operating Software With Automatic Calculation And Statistical Evaluation Of Sample Results, Automatic Leak Check, Sleep / Wakeup Function, Gas Stop, Service And Maintenance Support And Weight Transfer From External Balance. • All Instrument Functions Incl. Gas Flow And Pressures Must Be Digitally Controlled For Diagnosis And Trouble Shooting Via The Internet. Consumables: To Be Supplied With Consumables Enough For 1, 000 Sample Analysis In Chns / Cns Mode. Necessary Documents: - • Catalogue In Original. • All Technical Specifications Should Be Printed On The Manufacturers Catalogue / Data Sheet. , Compound Microscope : Compound Microscope ( 10X Eye Piece, Objective With Magnifying Powers 10X, 40X And 100X Oil Immersion Objective Lens ( Body - Monocular Die-Cast Body, Inclinable Upto A Horizontal Position ( 90° ) ; Focussing - By Coarse & Fine Focusing Knobs; Eyepieces - Huygenian 10X And 15X; Objectives - Hard Anti-Reflection Coated, Colour Coded Par Focal Achromatic 10X, 40X, 100X, Oil Immersion; Condenser - Built-In Sub Stage Condenser With Iris Diaphragm. Branded, Best Quality ) , Compoundtrinocular Microscope With Camera: Trinocular Head, Eyepiece: Swf 10X, U Plan Objectives Of 4X, 10X, 40X And 100X, Abbe 1.25 N. A. Condenser With Iris Diaphragm, Ceramic Coated Flat Top Stage, Co Axial Coarse And Fine Focusing, Led Or Halogen Illumination With Automatic Voltage Sending Power Supply, Digital Camera ( 5 Mega Pixels ) , Fire Wire Cable, C-Mount Adapter 0.7X And Image Analysis Software With 4D Experiment Ability. , Conductivity Bridge : Advanced Microprocessor Based Design. Brand Name And Model Name Must Come In The Display. Conductivity And Tds Modes. Automatic And Manual Temperature Compensation Auto Ranging. 0-20?S / Cm, 20-200?S / Cm, 200-2000?S / Cm, 2 – 20 Ms / Cm, 20-200 Ms / Cm, 200Ms / Cm -2000. Multi Point Calibration. Tds Conversion Factor From 0.40 To 1.00 Cell Constant Adjustable From 0.1 To 10.0 Temperature Coefficient Adjustable From 0 To 10% / °C Normalisation Temperature Adjustable From 15 To 30 °C. Bi Directional Rs232 Interface. Baud Rate Selectable From 1200, 2400, 4800 And9600. Single And Continuous Print Out Of Conductivity. Multiple Printout Types. Combinations Selectable From Sr. No., Cond / Tds, Date, Time And Temperature. Real Time Clock. Temperature Setting ( Manual Temperature Compensation ) . Calibration Report As Per Glp Requirements Lcd Touch Screen Display With Backlight. Memory Storage Of 100 Measurements. Data Logging Facility Up To 500 Results. Data Logging Interval Selectable From 5S, 10S, 20S, 30S, 1M, 2M And 5M. Temperature Calibration. , Compound Phase Contrast Binocular Microscope : Body: Binocular, Sturdy, Stable Base Body With Focus Adjustment Controls. Eye Piece: Paired, High Quality, Achromatic, Wide Field, System Complete With Illumination System Is Required. Objective: Three Objectives 10X, 40X, 100X. 10X And 40X Objectives Should Have Numerical Apertures Of 0.25 And 0.65 Respectively.100X Should Have Numerical Aperture Of 1.65. Nose Piece: Revolving Nose Piece To Accommodate A Minimum Of Three Objectives With Click Stops. It Should Be Provided With Ribbed Grip For Easy Rotation Mounted On A Precision Ball Bearing Mechanism For Smooth And Accurate Alignment. Stage Uniformly Horizontal, Mechanical Stage Having Dimensions Of Length 140 Mm ( + / - 20Mm ) . The Stage Should Be Provided With Spring Loaded Slide Holder For Exact Positioning Of Specimen / Slide. The Stage Should Have Ball-Bearing Arrangement To Allow Smooth Travel In Transverse Directions I.E. 80 Mm ( + / -10Mm ) And Front To Back Direction, 50Mm ( + / - 10Mm ) . The System Should Have A Build-In Variable Light Source ( Illuminator ) . This Light Sourceshould Have A 50 W, 12 V Halogen Lamp. All Consumables Required For Installation And Standardization Of System And Microscopecover To Be Given Free Of Cost. , Desktop Computer With Accessories : Corei5-11400 Motherboard-Gigabyte H510mh , 16 Gb Ddr4 Ram, 512 Ssd, Key Board, Mouse, 19”Led Colour Monitor, Bluetooth, Cabinet, Branded Laser Printer. , Digestion Hood For The Laboratory : Internal Lining: Suitable Material For Hf Resistancelike Upvc Or Pp Internal Size ( 1600X675x1250 Mm : Wxdxh ) ± 10%Should Supply With Digital Face Velocity Meter Withalarm / Low Exhaust Indicatorcold Water Service Fixture ( Inlet And Outlet, Pre-Plumbed ) For Using Distillationunit Inside. Tri-Wall Construction For Maximum Robustness. U-Pvc / Pp Internal Chamber. Chain And Sprocket Sash Support System. Hood Lighting Is Pre-Wired. Lighting Is Electronically Ballasted, Energy Efficient, Instant Start. Typical Light Intensity On Work Surface Is >1076 Lux In Zero Ambient Conditions. U-Pvc Exhaust Collar Ensures Superior Chemical Resistance. One Gas Service Fixture-Pre-Plumbed Internal Electrical Connection: Two Number ( 5 / 15 Amp ) Socket Internal Light Fitting For Proper Illumination With External Switches Vertical Sash: Polycarbonate / Toughened Float Glass ( Acidresistant ) Removable Baffle / Suitable Mechanism For Easycleaning, Blower And Duct: Pp+Frp – 250 Mm Diameter Duct 20 Feet In Length 1 Hp Motor And Reputed And Standard Company ( Brand Must Be Mentioned ) , 600 Cfm Minimum Volume Weather Proof Pp / Motor Housing. Exhaust: Pp+Frp Exhaust Fan With Chemical Resistantimpeller System Will Be Installed In First Floor Of Laboratory Block. Stack Height Should Beat Least Three Meters Above Top Roof ( Two Storey Building ) Shaping Vanes Increase Airflow “Sweep” At The Critical Area Atthe Sidewall To Improve Containment, Especially When Laboratorypersonnel Walk Fast In Front Of The Hood. , Electronic Precession Balance : Maximum Capacity [ Max ] 200 / 2000 G Minimum Load 20 Mg, Readability [ D ] , 0.001 / 0.01 G Tare Range-2000 G, Repeatability ( Max ) 0.001 / 0.01 G Repeatability ( 5% Max ) 0.0005 / 0.005 G, Linearity±0.002 / 0.02 G Stabilization Time2 / 1.5 S Adjustment External Physical Parameters Levelling System Manual Display Lcd ( Backlit ) Delivery Components Balance, Weighing Pan, Weighing Pan Shield, Grounding Foot ×1, Foot ×3, Power Supply. Weighing Pan Dimensions 128×128 Mm Packaging Dimensions 470×380×336 Mm Net Weight-3.2 Kg Gross Weight 4.8 Kg, Protection Class Ip 43 , Communication Interface Communication Interface, 2×Rs232¹, Usb-A, Usb-B, Wi-Fi® ( Option ) Electrical Parameters, Power Supply , Adapter: 100-240V Ac 50 / 60Hz 0.6A; 12V Dc 1.2A Balance: 12 – 15V Dc 0.4A Max , Environmental Conditions Operating Temperature +10 — +40 °C. , Environmental Shaker :Environment Shaking Incubator : Salient Features , Programmable Logic Controller ( Plc ) , 4.3 Hmi With Colour Display And Touch Screen, Password Protected Operation. , Universal Platform To Accommodate Vanous Type Of Flask And Test Tube Rack Max ( 8X250ml ) .Electronic Capacitance Type Humidity Sensor , Direct Display Of Temperature And Humidity, Display Of Set Value And Process Value, Unique Air Flow System Ensures Even Distribution Of Temperature And Humidity, Precise Control Of Temperature And Humidity By Using Built In Pid Controller ( Auto Tuning Type ) , Forward And Backward Rotation Programs And Rpm 30-350, Maintenance Free Brushless Induction Motor, Variable Frequency Drive ( Vfd ) Permanently Lubricated Bearing For Noise Less Operation, Triple Eccentric Counter Balanced Drive Mechanism For Uniform Agitation, Castor Wheel For Ease Of Mobility Adjustable Levelling Jack. , Horizontal Autoclave : 1.Fully Automatic Micro Processor Based High Pressure, High Vacuum Autoclave For Sterilizing Material Including Agars, Sterilization Of Solution In Open & Closed Bottles, Disinfection Of Materials And Waste Decontamination. 2. Should Be Front Loading, Have Rectangular, Horizontal Chamber With Well Insulated Jacket, Chamber Volume Minimum 165 Lit. 3. Should Have Single Vertical Sliding Door To Have A Pass Through System. Door Should Be Electrically Controlled Having Fully Automatic Function With Multiple Safety Arrangements. Sealing System Should Be Based On Silicone Seal.4. Should Have At Least 50Mm Thick Insulation Materials On Jacket And In Doors To Ensure Low Thermal Losses. Working Temp. Of The Door Should Be Less Than 45Deg. C. 5. Should Be High Grade Stainless Steel.6. Should Have A Built In Colousr Touch Screen.7. Should Have Audio Visual Alarms In Case Of Undesired Situations. 8. Should Have Programmable Operators Access Level. 9. Should Have At Least 10 Pre Programmed Standard Cycles Plus 5 Or More User Programmable Cycles And Provision Of Chip Card Port For Loading Of New Programs Through Chip Cards.10. Should Have Temperature Adjustable From 25Deg. To 135 Deg. C. 11. Safe Working Pressure Range Should Be Adjustable 12. Should Have Complete Monitoring Of Cycle Operation And Provided With At Least Two Pressuresensors And Two Temp. Sensors ( Pt -100 ) In Addition To Analog For Chamber Pressure, Jacket Pressure And Steam Generator Pressure Indication.13. The Unit Should Be Equipped With Multiple Safety Mechanisms For Emergency Stop Over Pressure Safety Valves For Chamber And Jacket, Over Temp Safety, Steam Traps And Electrical Safety.14. The Unit Should Include Non Fade Built In Thermo-Recorder For Step Progress Values During The Cycle With Time And Date And Alarm Condition If Any.15. Should Have Built In Feature Of Water Saving System For Water Conservation.16. Should Be Supplied Complete With High Quality Stainless Steel Trolleys And Sterilization Baskets: A. External Trolley = 01 Nos.B. Internal Trolley With Steel Roller C. Shelves = 01 Nos. And D. 2 Sets Of Sterilization Baskets. 17. All Accessories & Electric Fitting To Be Included 18. Three Compulsory Visits For Calibration And Check-Up Irrespective Of Complaints In Year.19. The Steam Generator Should Be Also Be Made Of Aisi 316 Ti Steel & The Steam Generator Should Be Equipped With Automatic Cleaning Facility. 20. Integrated Waste Water Cooling, Integrated Water Saving Device. Touch Screen Display, Chip Card Reader And Rs 232 Interface. , Hot Air Oven : Capacity 250 Litre, Temp Range: +5ºc To 250ºc. Control Accuracy: ±0.2ºc, Uniformity: ± 2.0 At 100.0ºc Minimum 3 No. Of Shelves With Height Adjustable In 25Mm Steps, Glass Window In-Built Into The Door For Easy Viewing Of Samples, Automatic Cut Off Of Heater & Blower When Door Opened, Digital Pid Temperature Controller With Timer, Alarms And Auto Tuning, Aero Dynamic Internal Design For Achieving Horizontal Air Circulation, Solid And Plain Bottom Without Electrical, Outer Body Made Of G.I Epoxy Coated Inner Body Made Of Stainless Steel With Clear Bottom Ce Certified. Brand Name And Model Name Must Come In The Display. , Hot Plate : Size 420 X 320 X 130 Mm Ht. ( Total Height With Feet ) Weight 9 Kg, Voltage 230V ( 50Hz ) , Temperature 250°C Maximum Uniformity + / - 2°C.Temperature Rise 6°C Per Minute Temperature Drop 1°C Per Minute, The Hot Plate Should Be Able To Control The Temperature Within + / - 2°C, Temperature Should Be Uniform Throughout The Hot Plate Surface. 6. There Should Be Rims Around The Edges Of The Hot Plate For Safety, Power 2200 W, Approx. 9.6 Amp In 230V, Material Pfa Coated Graphite. , Laminar Air Flow Chamber : Microprocessor Controlled System With Motorised Door. Type Of Airflow: Horizontal Full Password Protected Operation. 70% Of Air Should Be Recirculated To The Cabinet Work Area Through Hepa Filter And The 30% Balance Should Be Exhausted Through Hepa. The Balance Should Be Dynamic To Ensure The 70 / 30 Recirculation / Exhaust Air The Instrument Must Have Hepa Filters On Down Flow As Well As Exhaust With An Efficacy Of 99.99% For Particles Sized Of Calibration Certificates Along With Dop Test Report Shall Have To Be Submitted At The Time Of Supply Of Instrument ) The Dimensions Of The Working Chamber Should Be In The Following Range: Length: 90-120 Cm , Width: 40-60 Cm , Height: 50-80 Cm . The Main Body And Working Chamber Of The Cabinet Should Be Made Of Stainless Steel, Rigid And Rustproof With Removable Trays The Cabinet Should Have An Electrically Operated Sliding Front Sash Made Of Safety ( Uv ) Glass With A Provision For Manual Operation Of The Sliding Front Window. Also, The Sliding Front Sash Should Have True Air And Aerosol Tight Electrical Shahs. Front Door: Clear Transparent Sturdy Material Work Chamber Should Be Fitted With A Fluorescent Lamp For Illumination And Should Have Programmable Uv Light Cycle. The Unit Should Have Microprocessor Control Keys With Large Icons And A Large Graphical Display With Provision For The Permanent Display Of The Following Key Cabinet Conditions. I. Inflow And Down Flow Air Velocity Ii. Exhaust And Recirculated Airflow Volumes Iii. Time And Date Iv. Residual Lifetime Of Filters & Total Time Of Cabinet Operation ( Optional ) Alarm Notification In The Following Situations: I. Low Inflow Velocity Ii. Low Down Flow Air Velocity Iii. Hepa Filter Life Iv. Alarms For Clogged Filters V. Other Malfunction Compatible At A Power Supply Of 220 V, 50Hz Noise Level: < 65 Db Basic Cabinet Should Be Termite And Insect Resistant And Washable Accessories: Manometer, Gas Inlet, Castors The Cabinet Should Be With A Stand With Lockable Castors Brand Name And Model Name Must Come In The Display. , Multimeter With Ion Selective Electrodes For Water Quality Testing : Colour Capacitive Touch Screen With Software Control Facility. Can Store 2000 Sets Of Test Data, Which Can Be Saved And Transferred To Usb Memory Stick And Opened With Excel. Power: Universal Ac Adapter And With Rechargeable Lithium Battery ( Included ) . Concentration Range: ( 0~19990 ) , Can Switch 6 Kind Of Concentration Units: Ug / L, Mg / L, G / L, Mol / L, Mmol / L, Ppm. Concentration Resolution: 4 Significant Digits ( Expressed In Scientific Notation ) Can Be Operated Through 5 Amp Plug And Battery. Accuracy: ±0.1Mv Or 0.03% Temp Range: ( 0? To 100? ) Accuracy: ±0.1? Output Through Usb / Bluetooth Battery Life 1000 Hour. Type: Lithium Battery. Ise- Fluoride, Chloride , Bromide, Ammonia, Brand Name And Model Name Must Come In The Display. , Mechanical Shaker: Compact Bench Top Microcontroller Based Shaker With Temperature Control Range From Ambient +5°C To 60°C , Ergonomicallydesignedwithminimalfootprint Triple-Eccentriccounterbalanceddriveforuniformagitationwith 25Mmshakingorbitmaintenance Freepermanent ( Self ) Lubricatedshieldballbearingsfornoiselessoperationfrpexteriorwithanti-Vibrationmountforsmoothrunning Preciseshaking Speedcontrolwithgentlestart / Stopcycle, Preventingspillagepowerfulpermanentmagnetdcdrivewithdigitalleddisplayofspeed Pulsewidthmodulation ( Pwm ) Basedspeedcontroloptionaltimerfunctionforspeed Autore-Starttosetspeedafterpoweroutage Universalplatformtoaccommodateerlenmeyer, Roundbottom, Volumetricflasks, Testtube Holders&Microplateholders Hasautorestartfunctionafterpowerinterruptionwithnonvolatilememory ( Retainsetparametersafterpowerfailure ) Orbital Shaking With Orbit Diameter Of 25 Mm, Speed 20-450 Rpm With Accuracy Of ± 2 Rpm, Led Display , Universal Platform And Clamps To Hold Flaskscapacity 100Ml-64Nos Or 1000Ml. -16Nos, Tray Dimension : 450 X 450 Mm, Noiseless Operation, Operational Voltage - 220 ± 20V, 50 Hz, Should Meet Ce Standards , Mechanical Soil Auger : Soil Auger Sampler : Made Of Iron : Screw Type, One Meter Long With Handle :Size : 2.5 Cm. Dia , Microprocessor Based Flame Photometer : Alphanumeric Graphics Lcd ( 240X 128 Dots ) Brand Name And Model Name Must Come In The Display Microcontroller Based Na, K, Li, Ca& Ba Auto Ignition Gas Leak Sensor Auto Gas Cut Off. Pass Word Protection. Separate Logging For Guest And Administrator Quadratic Curve Fitting Rtc High Quality Compressor Software Na Minimum Concentration Without Dilution 2 Ppm And 0 -200 Meq / L With 1:100 Dilution Ba Can Be Measured Upto 3000Ppm Without Dilution In Higher Concentration Mode And 500Ppm At Lower Concentration Mode. Caupto 250 Meq / L With 1;100 Dilution Bandwidth 10Nm Curve Fitting Accuracy ±2% F.S Pc Link Software To Send Data To Pc. Gas Cylinder And Regulator Must Be Supplied. Product Must Be Ce Certified And Company Should Bear Iso Certification. Brand Name And Model Name Must Come In The Display. , Microtomy : Section Thickness Range: 0.25 - 60 ?M Trimming Thickness Range: 5 - 500 ?M Resolution: 0.25 For 0.25 - 1 ?M 0.5 For 1 - 5 ?M 1 For 5 - 20 ?M 2 For 20 - 30 ?M 5 For 30 - 60 ?M Resolution: 5 For 5 - 10 ?M 10 For 10 - 100 ?M 20 For 100- 200 ?M 50 For 200 - 500 ?M Knife Carrier Retraction During Return Travel Of The Specimen: 60 ?M Horizontal Feed Range Of The Knife Carrier: Max. 28Mm Vertical Specimen Stoke: Max. 64Mm Specimen Size: 55 X 50 Mm Specimen Orientation: X And Y Axes: Universal 8º Z Axis: Up To 360º , Microwave Digestion System : Large Furnace Cavity Design With Completely Independent Intellectualproperty Rights, 1~6 100Ml Ultra-High Pressure Digestion Tanks Can Be Placed At The Same Time; Industrial Grade 1000W Magnetron. Temperature And Pressure Dual Measurement And Control, Precise Control, Active Prevention Of Over-Temperature And Over-Pressure, Maximum Working Pressure: 6Mpa, Maximum Withstand Temperature: 300°C, Maximum Working Temperature: 250°C High-Precision Anti-Interference Pressure Sensor Adopts Double Explosion- Proof Control Mode To Directly Measure The Actual Reaction Pressure In The Digestion Tank, The Pressure Measurement Range Is 0~10Mpa, And The Pressure Measurement Accuracy Is 0.01Mpa; Insert High-Sensitivity Platinum Resistance Temperature Sensor, Directlymeasure The Actual Reaction Temperature In The Digestion Tank, The Temperature Range Is 0~300°C, And The Temperature Measurement Accuracy Is ±0.1°C; It Can Measure And Control The Pressure And Temperature In Any Reactiontank, And The 7-Inch High-Definition Camera Display Accurately Shows The Chemical Reaction Process; Equipped With Perfluorination Digestion Tank Or Ft Double-Layer Digestion Tank: Ptfe Digestion Tank Is Made Of Ptfe ( Polytetrafluoroethylene ) , And The Sheath Is Made Of High-Strength Explosion-Proof Aerospace Composite. The Fiber Material Is Made By One-Time Die-Casting, High Temperature Resistance, High Pressure And Strong Acid Corrosion Resistance; Easy Disassembly And Assembly, Fast Cooling; Double Venting Protection And Digestion Tank For Venting Holes And Sealed Bowls; Up To 6 Ultra-High Pressure Digestion Tanks Can Be Placed At The Same Time; The Furnace Cavity Is Ventilated With Acid Resistance, Large Air Volume Centrifugal Fan, And The Exhaust Air Volume Is 5M3 / Min; Specially Designed Self-Locking Ground Moving Safety Door To Resist Accidental Explosion And Microwave Leakage. Tank Technical Parameters: The Pressure-Resistant Jacket Material Is A Hydrophobic High-Strength Pressure-Resistant Composite Fiber Material, Which Is Explosion-Proof And Supports Washing And Easy To Clean. The Inner Tank Adopts Imported Modified Polytetrafluoroethylene ( Tfm ) , High-Strength Frame Type Closed Ultra-High Pressure Reaction Tank: The Highest Withstand Temperature =300 °C. Explosion-Proof Membrane Automatic Pressure Relief And Peek Compressionmodule Pressure Relief Safety Design To Ensure The Safe Operation Of The Instrument. The Whole Tank Pressure Monitoring System, The Threshold Value Can Beadjusted. Using High-Strength Engineering Plastics For One Injection Molding, Independent Ultra-High Pressure Digestion Tank Holder. Tank-6Pcs, Power- Ac220v / 50Hz / 10A, Microwave Frequency-2450 ( Mhz ) , Microwave Output Power-1000 ( W ) , Microwave Cavity-45 ( L ) , Protective Spraying- Pfa, Control Heating Method- Pid, Temperature Ramp-1~50? / Min, Cooling Time-=25Min, Microwave Leakage-=0.3Mw / Cm2, Temperature Control Range-0~300?, Temperature Control Accuracy-0.1?, Pressure Control Range-0~10Mpa, Pressure Accuracy-0.01Mpa, Outer Tank Material- Peek, Inner Can Material- Tfm1700, Highest Temperature Resistance-300?, Operating Temperature-250?, Highest Pressure-15Mpa , Microwave Oven : Convection Microwave Oven With Ceramic Enamel Cavity 21L ( 1. Capacity: 0.7 Cu.Ft. / 21 Ltr., 2. Heat Source: Convection 3. Power: Power Consumption ( Microwave ) 4.1200W 5. Power Source: 230V / 50Hz 6. Output Power ( Max ) : 2350W 7. Powerlevel:6 8. Display Type: Led Bar 9. Control Method: Membrane 10. Door Opening Type: Handle 11. Microwave Distribution: Turntable 12. Cavity Interior :Ceramic Enamel ) , Millipore Water Purifier : Parameter Value Or Range Pressure 2 – 6 Bar Flow Rate > 10 L / Min At 2 Bar Feed Water Type Potable Water Temperature 5 – 35 °C Conductivity 10 – 2000 ?S / Cm At 25 °C Ph 4 – 10 Hardness ( As Caco3 ) < 300 Ppm Silica Concentration <30 Ppm Carbon Dioxide Concentration ( Co2 ) < 30 Ppm Langelier Saturation Index ( Lsi ) < 0.3 Fouling Index ( Fi5 ) Or Silt Density Index ( Sdi ) = 7 ( * ) Total Organic Carbon ( Toc ) < 1 Ppm Free Chlorine < 1.5 Ppm Typical Water Quality Measures With A Well-Designed And Maintained Distribution Loop Of 20 Meters: Flow Rate Pressure 5 Lpm / 1.32 Gpm 2.2 Bar / 32 Psi 15 Lpm / 3.96 Gpm 1.9 Bar / 28 Psi20 Lpm / 5.28 Gpm 1.6 Bar / 23 Psi Plumbing Connections Inlet ( Feed Water Connection ) 3 / 4 Bsp Loop Start / Return 1 1 / 2 Sanitary Tc Drains 3 / 8” Lab Water Purification Systems - Type 2 ( Pure ) , Muffle Furnace : Controller: Should Be Microprocessor Based & At Least 8 Segment Programmable Or Equivalent Controller With Necessary Safety Features. Programmable Temperature ( Pid Controller ) Controller With Heating Rate Control From 10?C / Min To 40?C / Min. ( Fast Heating Rate Would Be Preferable ) , Heating Element :Kanthal A1 And Backed By High Temperature Ceramic Insulation , Safety: Over Temperature Protection& Over Load Protection ( Safety Controller ) Should Provided. Door Safety Switch Must Be Provided So That It Disconnects Power Supply To Heating Element When Door Opens. Should Be Equipped With Digital Over Temperature Protection Circuit To Fail Safe In The Event Of A Controller Malfunction , Critical Electronics Component And Heating Elements Protected By A 35A Circuit Breaker., Weight : Less Than 100 Kg , Two Set Of Operation And Maintenance Manual Should Provided. , Ph Meter : Supply Of Bench Top, Digital Ph Meter Along With All Its Accessories And Spares Required Brand Name And Model Name Must Come In The Display. To Operate The Instrument As Per Specification Given Below: The Direct Reading Laboratory Ph Meter ( Digital ) Operable At 230V + / - 10V A.C., 50 Hz Powersupply With Necessary Cable Connections And Other Standard Accessories Required For Smoothoperation. Measuring Range Resolution Accuracy Ph Range 0 To 14 Ph ( Min. ) 0.001 Ph ± 0.002 Ph Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2, Rel. Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Temperature Mtc -10.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C, Temperature Atc -5.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C, Temperature Compensation : It Should Have Both Automatic And Manual Temperaturecompensation Touch Screen Display , Parameters Likeph, Temperature, Mv, Date & Time Etc. Ingress Protection Level : It Should Be Ip54 Complied Protection Level.Power Requirements : It Should Be Operable With 9 -12V / 10W Dc Adapter. Storage Of Instrument : It Should Be Able To Stored In Temperature Of 5 To 40 °C And Relative Humidity Of 5 To 80% ( Non-Condensing ) Glp Compliance : It Should Be Glp Complied .To Improve The Reproducibility, It Should Allow To Choose From At Least Three Endpoint Criteriaaccording To Our Requirements.The Electrode Holder Should Move In A Perfectly Vertical Way, Making It Easy To Place The Sensor In The Perfect Position I.E. Vertically In The Measurement Beaker. It Should Be Able To Connect Peripherals Via Usb And Rs232, Increasing Its Possibilitiessignificantly. Export Of Measurement Data And Calibration Data Should Be Possible To Usb Stickto Direct Pc Software Whenever Required By Us. It Should Allow Monitoring Of Limits Of Parameter Ph By Giving A Warning Message When The Value Falls Below Or Exceeds The Predefined Limits. It Should Have Facility Not To Delete Of Data And Changing Of Settings In Routine Mode. Hence It Required To Be Pin Protected For Login, Deletion Of Data, System Settings Etc. It Should Have Choice Of Endpoint Formats Like Automatic, Manual And Timed. It Should Have Choice Of Ph Decimal Places Like X.Y, X.Yy & X.Yyy ( Up To One, Two Andthree Decimal Places. ) It Should Have Data Storage Up To 1000 Measurements ( Min. ) It Should Have Ph Sensor Input Through Bnc Connector With Impedance Of More Than 3 X 1012O . It Should Have Temperature Sensor Input. It Should Be Able To Show The Quality Of Last Calibration On Its Screen. , Precision Drier : Capacity, Material And Construction: Cap:3Ltr / H Evaporation Rate. Suitable For Aqueous Feed Solution. Laboratory Scale Model. External Body –Ss316. Drying Chamber And Cyclone In Full Ss 316L Construction. Total Construct Size: 1200 X 1300 X 2000 Mm ( ±10% Dimesional Tolerance ) , Self-Supported On Castor / Wheels ( Compressor Size Is Extra ) . Weight: Max 130 Kg ( ±20% ) ( Compressor Weight Is Extra ) Chamber: Chamber Size: Diameter-280-350Mm, Length- 600-1000 Mm, With Conical Bottom. Feed Pump: Variable Speed Gearless Peristaltic Pump With Dual Teflon Rollers And Precise Speed Control. Feed Pump Should Be Of Repute Make Preferable Watson Marlow / Miclin / Flowtec Or Equivalent. Silicon Tube For Feed. Pump Should Be Controlled Through Plc And Manually As Well. Spray System And Nozzle:Moc For Two-Fluid Spray Nozzle: 316L Variable Aperture Nozzle Of 0.7Mm.Other Sizes Such As 0.5 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 Mm May Be Available. Auto De-Blocking System For Spray Nozzle Which Will Be Fitted On Nozzle Controlled Through A De-Blocker Timer. An Additional Spray Aperture For Future Use Should Be Included. Nozzle Geometry And Design Must Be Submitted With A Tender Document. Desired Output Particle Size Range 20-45 Micron, Compatible With Ceramic Slurry Also. Controller And Display: Plc Based Operating System With A Multi-Touch Colour, Interface, 9” Hmi With Data Logging, Online Trends, Recipe Functionand Ability To Store Recipes And Recall For Ease Of Use. Plc Of Repute Make Such As Siemens, Delta Or Equivalent Etc. Thesystem Should Have An Audio Visual Alarm For A. Inlet Temperature, Outlet Temperature And Atomization Pressure. Thesystem Should Have Parameter Control And Safety Interlock. Inlet / Input Air Temperature / / Temperature Range: Ambient To Minimum 260 Degrees C, Variable And Selectable Aspirator Airflow:Max. 150 Cum 3 / Hr With Vfd For Motor Control Of Repute Make Such As Delta, Fuji Or Equivalent Air Heater:Electrical Heater With Minimum 6.0Kw Capacity Inlet Filter:Combination Type ( Pre + Hepa ) For Pre-Filtering Environment Air To Keep Most Impurities And Particles Away From The Spray Drying Process, Outer Filter Assembly: Mainly To Protect Aspirators From Fine Particles. It Should Include Spun Bound Polyester Cartridge With Ptfe Coating. Efficiency- 1Micron Down To 99.99%.Compressor: Oil-Free Air Compressor Piston Type With Min. 20L Air Reservoir 1Hp Power Supply: Single-Phase, Compatible With Indian Standard , Quartzdouble Distilled Water Plant: All Quartz, Material Of Distillation Unit Shall Be Made Of High Purity Electronic Grade Transparent Quartz Only, Heaters: Demountable Boiler Panel With Compact Design Of Boilers & Condensers Easily Mountable For Cleaning And Maintenance With Spiral Heaters, Electrical Requirement: 230-250 Volts 10 / 50Hz, Single Phase, Dist. Water Output Capacity ( Ltr / Hr ) : 2.5 Ltrs / Hr, Total Power Consumed-4.4 Kw, Conductivity ( ?S / Cm ) : <1*10-6, Distillation Units Type-Vertical, Biological Activity-Pyrogen Free, Double Stage Glass ( Quartz ) Distillation Units-Yes, Double Wall Condenser- Quartz, Cooling Water Consumption ( Ltr / Hr ) -2 Ltrs / Min, Boiler-Quartz, Demountable Model And Should Be Connected With Rubber Tumbling And Pinch Cock For Cleaning Sediments In Primary Boilers And Must Be Ce / Iso Certified.Primary Boiler Provided With O Ring Accessories Distillation Apparatus Power Supply ( Daps ) : The Unit Provides For Automatic Working Of Distillation Unit By Switching Off The Heaters In Case Water Level Falls Below The Heating Coil, There By Safeguarding The Heaters. The Unit Resumes Distillation When Water Level Is Restored. The Unit Also Comes With Buzzer. Apart From The Above Features, Dual Cut Off: The Dual , Quartz Single Distilled Water Plant: All Quartz, Material Of Distillation Unit Shall Be Made Of High Purity Electronic Grade Transparent Quartz Only, Heaters: Demountable Boiler Panel With Compact Design Of Boilers & Condensers Easily Mountable For Cleaning And Maintenance With Spiral Heaters, Electrical Requirement: 230-250 Volts 10 / 50Hz, Single Phase, Dist. Water Output Capacity ( Ltr / Hr ) : 2.5 Ltrs / Hr, Total Power Consumed-2.2 Kw, Conductivity ( ?S / Cm ) : <1*10-6, Distillation Units Type-Vertical, Biological Activity-Pyrogen Free, Single Stage Glass ( Quartz ) Distillation Units-Yes, Double Wall Condenser- Quartz, Cooling Water Consumption ( Ltr / Hr ) -1 Ltrs / Min, Boiler-Quartz, Demountable Model And Should Be Connected With Rubber Tumbling And Pinch Cock For Cleaning Sediments In Primary Boilers And Must Be Ce / Iso Certified. Distillation Apparatus Power Supply ( Daps ) : The Unit Provides For Automatic Working Of Distillation Unit By Switching Off The Heaters In Case Water Level Falls Below The Heating Coil, There By Safeguarding The Heaters. The Unit Resumes Distillation When Water Level Is Restored. The Unit Also Comes With Buzzer. Apart From The Above Features, Dual Cut Off: The Dual Cut Off Switches Off The Heater Even When There Is No Cooling Water Supply To The Condenser. , Refrigerator : Frost Free Refrigerator : Auto Defrost Function To Prevent Ice-Build Up Capacity 253 Ltrs : Suitable For Small Families And Bachelors | Freezer Capacity: 69 Ltrs Fresh Food Capacity: 184 Ltrs Digital Inverter Compressor – Enjoy Greater Energy Efficiency, Less Noise And A Long-Lasting Performance. It Automatically Adjusts Its Speed In Response To Cooling Demand Shelf Type: Spill Proof Toughened Glass Shelves With Easy Slide Special Features: Easy Slide Shelf, Door Alarm, Inverter, Temperature Control, Cool Pack, Stabilizer Free Operation ( 100 ~ 300 V ) Key Feature : All Round Cooling For Even Cooling Corner To Corner | Power Cool - Enjoy Rapid Cooling Performance | Moistfresh Zone - Preserve The Freshness And Flavor Of Fruit And Vegetables For Longer | Interior Led Light | Moveable Ice Maker | Tall Bottle Guards | Recess Door Handle | Fresh Room | Deodorizer | R600a Refrigerant , Refrigerator-Temperature Control : The Upright Freezer Type Comes With An Abs Make Interior. Its Outer Body Is A Painted Steel Board, The Door Comes With A Handle And A Safety Lock On It, There Are Casters Provided For Easy Handing, Its Inner Drawers Are Made Of Plastic Control System : Uses A Microprocessor-Based Temperature Controller • The Temperature Control Range Is Adjustable Between -10°C To -20°C • It Has A Digital Temperature Display, Equipped With Audio Such As: High Or Low Temperature Alarm, Chamber Volume 270Ltr, Chamber Dimensions 800X500x500 Outer Dimension 1060X695x792 Input Voltage 230Vac 50Hz , Semi-Automatic Nitrogen Protein Analyzer : Analyzer Should Be Semiautomatic System Consisting Of A Digestion Unit, A Scrubber Unit, And A Distillation Unit. Digestion Unit: Automated With Integrated Programmable Control, Should Have Electrically Heated ( 230 ± 10 Volts, 50 Hz Ac ) Metal Blocks. It Should Be Capable Of Providing A Temperature Range From 100°C - 440°C With ±10°C Repeatability. Should Have Inbuilt Temperature Controller With Digital Display And Led Display Along-With Manual Temperature Adjustment. Heating Time Setting With Steps From 1- 150 Minutes Should Have The Capacity To Accommodate At Least Eight Numbers Of Digestion Tubes Each Of At Least 250Ml Capacity , Should Have Leak Proof Integrated Condensers ( Fumes Carriers ) Made Up Of Glass, Fixed On A Movable Panel Along With Adopter For Outlet To The Scrubber Unit. Proper Digestion Exhausts System. Scrubber Unit Should Be An Oil Free Centrifugal Suction Type, With Manual Vacuum Adjustment Facility. Corrosion And Impact Resistant Provided With Condensate And Acid Fumes Collection Vessels. Should Operate On 230 ± 10 Volts, 50 Hz, Ac Power Supply. Distillation Unit Fully Programmable Distillation Unit Including Sample Dilution, Alkali And Receiver Addition, Distillation And Tube Draining Facility. Validated Procedure / Certification For Tkn Distillation Like Aoac, Epa, Din, Iso Etc, Should Be Made-Up Of Standard Quality Borosilicate Glass. Should Possess A Steam Generator Made-Up Of Borosilicate Glass Along With Heater And Have 3 Step Manual Control Facility I.E. Standby, Water Inlet And Distillation. Should Have Inbuilt Bellows Pump For Accurate Reagent ( Alkali / Acid ) Dispensing. Should Have Ventilation Valve. Should Have Timer For 5 - 15 Minutes With Audio Signal. Steam Inlet Tube Should Be Of Ptfe. Unit Should Have Quick Clamping Device For Digestion Tube With Adaptor. Should Operate On 230 ± 10 Volts, 50 Hz, Ac Power Supply. Complete Unit Shouldprovided With One Set Of Digestion Tubes Along-With The Servicing, Operating And Maintenance Manuals. Can Able To Monitor And Measurement Of Distillate Temperature. Self Adjusting Cooling Water Control Facility Safe Feature For Safe Distillation. Can Be Upgradeable Whenever Required Accessories: 2 Set Of Digestion Tubes, Digestion Tube Stand, Spillage Tray For The Condensers, Tube Removing Device , Soxhlet’S Apparatus : Body Constructed In Ms Epoxy Coated Finish , Featuring Use Of Mantle Type Heaters That Comes With Support Of Energy Regulator, Capability To Handle 6 Tests, Can Handle Flasks Of 250Ml Capacity, Supplied Withsupport Of Clamps As Well As Rubber Tubing, Works On Electric Supply Of 220 / 230 Volts, 50 / 60 Hz Ac, Suitable To Heat Soxhlet Flasks Of 250Ml , Top Loading Balance: Maximum Capacity ( Or ) Range Of The Balance80-90 / 220 Gm Readability 0.01 Mg ( 0.00001 Gm ) / 0.1 Mg ( 0.0001 Gm ) Tarring Range 0 – 220 Gm Display Backlit Graphics Display / Lcd With Touch Screen Operation. Repeatability ( Standard Deviation ) 0.03 Mg ( Small Range ) / 0.10 Mg ( Large Range ) , Linearity ±0.20 Mg / ±0.10 Mg, Eccentric Load 0.30 Mg, Calibration Adjustment With Internal Weights, Fully Automatic Calibration Technology With Temperature Controlled, Data Memory Function For Keeping Weighing Data & Calibration History Data, 10 Sensitivity Drift ±2Ppm / °C ( When Automatic Self Calibration Is Not Used ) Stabilization ( Typical And Fast ) Approx. 4.0 Sec ( 0.1Mg ) / 15 Sec ( 0.01Mg ) , Size Of Weighing Pan ~ 80 - 90 Mm, Shielding Glass Draft Shield With Flexible Configuration Protective Cover For The Terminal, Replaceable Feed Through For Weighing Below The Balance, Power Supply To Be Operable With 230 V Ac, 50 Hz Power Supply. Accessories Power Supply Cable With All Accessories For Operation, Operating & Service Manual 2 Sets ( Of Hard Copies ) With Calibration Certificate Of The Balance. Soft Copy Of Instrument Operating Manual To Be Sent During The Time Of Installation, Interface Standard Bi-Directional Rs-232 Interface, Dust Cover One. , Ups For The Laboratory : 10Kva - 192V-8Kw Online Ups , 16Nos External Battery Module With Iron Rack, Ups / Automatic Bypass Facility, True Double-Conversion Online Ups, Microprocessor Control For Higher Reliability. Pure Sine Wave.Input Power Factor Correction. Wide Input Voltage Range ( 110 V – 300 V ) . Generator Compatible, Selectable Charging Current - Allows Flexibility To Add Any Battery Size, Emergency Power Off , Uv-Visible Spectrophotometer : Double Beam ( 185-1100Nm ) Spectrophotometer With Standalone Colour Lcd Display With Pc Controlling Software -Optical System: Double Beam, Diffraction Grating -Minimum 1800 Lines / Mm, Scan Speed :6000Nm / Min, 8 Position Sample Holder, Photometric Details Range Must Cover From -4 To + 4, Bandwidth Variable ( 0.2Nm -6Nm ) Stray Light < 0.05% T @ 220, 340 ( Must Cover Less Than 370Nm ) , Baseline Flatness Must Cover +- 0.006A, Detector- Photodiode / Single Photodiodes / Dual Silicon Photodiodes, Power 240+- 10%, 50-60 Hz, Light Source- Xenon Flash Lamp, Wavelength Details-, Accuracy- Must Cover 1.0Nm, Measuring Modes- Absorbance, Transmittance ( % ) , Concentration, Operating Modes: Single Wavelength, Multiple Wavelength, Time Scan, Data Presentation- Display Analysis Results And Graphic Data On Screen, Pc Link Software, Port To Data Transfer, Supplier Should Provide Service For Installation, Demonstration, Training For All Operation Procedure, Temperature Range- Operating Conditions Should Cover +10 Degree C To 40 Degree, Analytical Quality Assurance- Instrument Should Have Internal Quality Assurance Tools, Certification- Must Comply Ce Certificate. Accessories: Quartz Cuvettes: 50Mm Length, 10Mm, 20Mm Path Length ( Each 2 Pairs ) , Original Catalogue To Be Enclosed. Dedicated Branded Pc To Be Quoted With The System .Should Have Manufacturer’S Service Centre In West Bengal And Details Location To Be Mentioned In The Quotation.. , Vertical Autoclave : Quality Systems For Medical Devices Built: • Floor Standing Vertical Type Top Loading Autoclave • Outer Dimensions: Width 75-87 Cm; Height 90-110 Cm; Depth 65-80 Cm Software Control:• Fully Microprocessor Based Proportional Integral Differential ( Pid ) Pressure Control• Controller And Software Should Comply With International Standards Such As 21 Cfr Part 11 Or Any Other Equivalent.• Should Have Facility To Store Identification Codes And Password Codes For Access Level Control• Built –In Memory To Store Number Of Cycles Sensors:• Should Have In-Built Platinum Resistance Temperature Detector With A Typical Resistance Of 100 O At 0°C That Complies With International Standards Of Safety Requirements For Electric Equipment For Measurement Control And Laboratory Use, Eg. Iec61010-1, Iec 61010- 2-040 • Option To Connect Additional Temperature Sensors And Pressure Sensors Should Be Available Display:• User Interface Should: • Be Easy To Operate• Have Digital Display Enabling Visualization Of Stage Of The Cycle, Set And Process Temperature, Pressure And Quick Access To Important Information • Preferably Have Graphical Display Of Temperature And Pressure• Have Notification For Replacement Of Filters After Appropriate Number Of Runs Performed. Chamber Volume: Should Be Not Less Than 100 Litres And Preferably Should Be 150-180 Litres In Capacity. Suitable Number Of Basket For Bottle, Vessels Or Agar Media Preparation Should Be Quoted Along With The Instrument.Chamber Material: Should Be Long Lasting, Made Up Of 316Ti Grade Stainless Steel Of Asme / Ul Grade Chamber Pressure: Chamber Should Be Designed To Withstand At Least 2.8Bar / 142°C And Should Meet, European Pressure Equipment Directive ( Ped 97 / 23 / Ec ) .2 | 2 Chamber Heating: Should Be Heated Uniformly By A Heating Plate On The Outer Wall With Heater Of Suitable Wattage For Quick Heating.Chamber Insulation: Chamber Should Be Completely Insulated With Chloride Free Glass Wool. Sterilization Temperature Range: 105°C To 137°C With Accuracy Of ± 0.1 Deg C At 121 Deg C & An Additional Isothermal Temperature Range Of 60°C To 105°C. Should Have Feature Minimizes The Time Liquids Are Exposed To High Temperatures During Sterilization Thereby Protecting Liquid Media, Saving Laboratory Time And Reducing Energy Consumption. Biohazard And Waste Management System: Should Have The Facility To Filter Air Removed From Chamber Before Sterilization That Isuseful For Sterilization Of Biohazard Waste.Safety: • Water Level Monitoring And Maintenance Of Constant Level For Safety Of Heaters. • A Safety Device To Prevent Opening The Door When The Chamber Is Pressurized. • Prevent Starting Of Runs If Doors Are Improperly Locked.• Safety Feature Should Allow Opening Of Doors Only When The Temperature Reaches A Pre-Set Temperature And Pressure Reaches Atmospheric Pressure.Power Requirement: A Suitable Size Of Electrical Switch Gear 3 Phase 440 Volt With Earthing Andrecommended Size Of Current Capacity Mccb Will Be Made Available On Wall At Appropriate Place. Other Connection And Installation Has To Be Done By The Supplier. , Hydrometer , Keen Boxes , Aluminium Box , Brass Sieve , Mortar And Pestle , Different Types Of Augers: , Screw Type , Post Hole Type , Dutch Type , Stirrera. Magnetic B. Electric , Khurpi , Electric Heater , Room Thermometer , Gps Machine , Camera , Lcd Projector
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 28
West Bengal View Result →
45.
Environment and Forests #8820007 Technical Bid
Supply Of Disaster And Rescue Equipments.- 2 1.01 Stretcher Folding Dimension: 1830 Mm ( 1 ) , 420 Mm ( W ) Nweight: 5 Kg Ncapacity: 200 Kg Nct / Mri Compatible And Radio Lucent Nmaterial: Carbon Fiber Or Fiber Glass Material Nseparate Hand Holds And Restraint Holds With Smooth Edges For Easy And Comfortable Lifting With Velcro Straps. N Bi01010001010000000000000515bi0100001113 20 Nos 3 1.02 Spade 10” ( With Wooden Handle ) A ) Size: Length 12”, Width 10” Of Rectangular Shape Nb ) Material: Made Of Wrought Iron. Nc ) Handle: Provision Of Wooden Handle To Be Incorporated. Nd ) Application: Suitable For Various Types Of Earth Work. Nbis Specification Ne ) The Shovel Blade Shall Be Made Of Suitable Quality Sheet Steel As Such T-50, T-55 Nf ) Each Blade Shall Be Made In One Piece Without Any Welded Or Riveted Joint. Ng ) Shovels To Be Supplied With Handles Complete. Nh ) The Blades Shall Be Well Formed & Cleanly Made. Ni ) The Blades Shall Be Free From Scams, Splits, Cracks N Bi01010001010000000000000515bi0100001114 50 Nos 4 1.03 Fluorescent Jackets A ) Description Nflorescent Colour Jacket With 50Mm Glass Bead Type Reflecting Tape In 2 Vertical And 1 Horizontal Band In Front And Back Same. Nfront Opening And V Neck Design. Nb ) Background Fabric N1005 Polyester. 125 Gsm Made From Bright Glossy Yarn, Adhering To En 471 Standard. It Shall Have Excellent Color Fastness And Should Be Uv Treated. Nc ) Colour Nflorescent Reddish-Orange / Fluorescent Lime / Yellow. Nd ) Reflecting Tapes Nglass Bead Type Reflecting Tape, En471 Class 2 Approved, 50Mm Wide, Color Of Reflecting Tape Will Be Silver Grey. Ne ) Accessories Ni ) Binding-Binding Will Be Black In Color. 100% Polyester. Fabric Will Be Used In Binding With Excellent Color Fastening. Nii ) Velcro-Velcro Shall Be 25Mm Wide And 50Mm In Length Positioned Vertically For Perfect Fastening. The Velcro Will Be Black. Nsize: Length 27 Inches And Width 23 Inches. N Bi01010001010000000000000515bi0100001115 50 Nos 5 1.04 Safety Helmet A ) Isi Marked: Is-2925 Of 1984 Nb ) Shell Material: High Density Polyethylene ( Hdpe ) Nc ) Adjustable And Detachable Head Band With Nape Nd ) Strap Material: Low Density Polyethylene ( Ldpe ) Ne ) Adjustable Chin Strap: Nylon Chinstrap And Rachet Type Head Band Nf ) Slot Fix Design: Provision For Easy Clip On Accessories Like Face Shields And Ear Muffs. Color: Yellow N Bi01010001010000000000000515bi0100001116 50 Nos 6 1.05 First Aid Box Reputed Brand Bi01010001010000000000000515bi0100001117 100 Nos 7 1.06 Medical First Responder Kit Reputed Brand Bi01010001010000000000000515bi0100001118 16 Nos 8 1.07 Casualty Bag As Per Gem Category Fluid Absorbing Body Cover Bag Adult. Bi01010001010000000000000515bi0100001119 30 Nos 9 1.08 Blanket Red Type: Fire Nmaterial: Aluminum N Bi01010001010000000000000515bi0100001120 60 Nos 10 1.09 Electric Drill Machine Out Power: Not More Than 600W Load Speed: Variable 1000- 2400 Rpm Nweight: Less Than 3 Kg Nshock Proof Body With Different Sizes Of Bits For Both Metal & Wood. N Bi01010001010000000000000515bi0100001121 6 Nos 11 1.1 Breathing Air Apparatus Set Spare Cylinder 1. General: The Self Contained, Positive Pressure And Open Circuit Air Breathing Apparatus Shall Be Certified For Use By The Fire Fighters For 45 Minutes Total Working Duration. N2. Technical Specification: Na ) Back Plate And Body Harness-This Shall Be Made Of Non-Metallic, Antistatic, Impact, Chemical & Fire Resistant Material And Orthopedic Ally Designed And Manufactured In Conformity To En / Din / Us / Bis 10245 Part Ii Standards And Certified For Use Y The Fire Fighters, It Shall Facilitate Mounting Of Air Cylinder Through Cam Lock. The Body Harness Shall Be Wearer Friendly And Safe For Carrying Load While All Buckles Shall Be Quick Release Type. Nb ) Pressure Reducer-This Shall Be So Designed So As To Meet The Air Demand For Two Users Simultaneously At A Stable Pressure On The Outlet With Inlet Pressure Varying From 300 Bars To 20 Bars And Shall Confirm To Provisions In En 137-20002 Class Ii. Nc ) Face Mask- This Shall Be Reverted Edge Seal Type And Made Of Flame Resistant Material Confirming To En 136. The Reflex Seal On The Outer Mask Shall Be So Designed So As To Facemask To Reduce Dead Space, Speech Transmitter For Clear Voice Reproduction And A Wide Angle Panoramic Vision Visor Made Of Polycarbonate Material And Shall E Self- De- Misting Type. The Head Straps Shall Be Easy To Tighten And Quick To Release. Nd ) Demand Valve-The Lung Operated Demand Valve Design Shall Either Be Titling Diaphragm Type Or Piston Type. This Shall Be Provided On The Facemask And Connected To The Pressure Reducer With The Help Of Rubber Hose Through Quick Connector. The Demand Valve Shall Be Rated For Minimum 500Lpm Airflow And Shall Activate With The First Breath. Ne ) Pressure Gauge: This Shall Be Bourdon Pressure Gauge With Luminescent Dial With Reassure Making In Bar And Encased In Fire Resistant Rubber Cover. The Gauge Shall Be Connected To Pressure Reducer Through Non-Metallic Rubber Hose. Nf ) Hoses-The Low Pressure Hoses Shall Be Flexible And Non-Kinking Type And Suitably Reinforced To Withstand 30 Bar Air Pressure While The High-Pressure Hoses Shall Either Be Flexible Or Rigid Metallic Tube Suitably Secured To The Back Plate So As Not To Obstruct The Movement Of The Weaver. Ng ) Warning Whistle-This Shall Be Fitted Either On The Back Plate Or Provided Along With The Pressure Gauge Assembly And Shall Be Automatic In Operation Giving Audible Alarm Of Minimum 90Db Intensity At 1 Meter Distance Of Low Cylinder Pressure In The Range Of 50+5 Bar. Nh ) ‘Y’ Manifold For Additional Connections-This Set Shall Have Provision Through Suitable Placed ‘Y’ Manifold To Facilitate Receiving Air From A Different Source And Supplying Air For Additional Facemask. Ni ) Air Cylinder- This Shall Be Corrosion And Impact Resistant And Made Of Light Alloy Fully Wrapped. The Size Of The Cylinder Shall Be Such That It Can Hold Sufficient Quantity Of Air ( Not Less Than 1800 Liters ) For Providing 45 Minutes Total Working Duration When Charged At 300 Bars Pressure. The Cylinder Shall Be Provided With Cross Flow Valve And En 144+2 Compliant. The Cylinder Shall Be Duly Approved By The Chief Controller Explosive Nagpur And Shall Be Capable Of Withstanding A Min. Hydraulic Testing Pressure Of 450 Bars. Nj ) Weight-The Weight Of The Ready To Use Set Shall Not Be More Than 12.5 Kgs. N3. Approval: The Complete Set Shall Have Relevant En Or Equivalent Approval And Certificate To This Effect Shall Be Furnished Along With The Offer. Ntechnical Evaluation:-The Technical Evaluation Of The Scba Shall Be Subjected To The Following: Na ) Meeting The Requirement As Mentioned From Sl. No. 1 To 3 Nb ) Designed In Conformity To En / Din / Us Standards, Conformity Certificate And Ccoe Certificate To Be Submitted Along With The Offer. N Bi01010001010000000000000515bi0100001122 2 Nos 12 1.11 Circular Saw Circular Saws Are Heavy Duty Power Tools Required In Search And Rescue Operation For Various Carpentry Tasks Associated With Access And Extrication Like Cutting And Sawing Of Timber, Wooden Beams, Door Frames, Fallen Trees Etc. Typically These Are Light Enough To Be Used By One Operator And Are Electrically Powered. N1. Electrically Powered Motor Operating In 100 To 250 Volts With Power Consummation Between 1700 To 2500 Watts. 15 Ampere Three Core Electrical Cord 5 Meter Length With Three Pin Plug Will Be Provided. N2. Idling Speed Of Motor Upto 2000 To 3000 Rpm With A Max. Load Rpm Of 1200 To 1500 Rpm. The Motor Should Have A Min. Endurance For Continuous Operation Upto 60 Minutes. N3. Should Incorporate Easily Locatable Push Button Start And An Electric Brake Quick Stoppage. N4. Size Of Blade: More Than 12 Inches Diameter With An Arbor Not Exceeding 3.2Cm ( 1.25Inches ) . The Blade Provided Will Be Carbide Tipped Blade With A Min. 32 Teeth Npower Output Min. 8 Hp Fuel Tank Capacity Main. 12 Liters Sound Pressure Level At Operator Ear 102 Db ( A ) Ntorque Maximum 7.7 Nm Nrecommended Bar Length Min. 30 Inches To Max. 42 Inches Solid Guide Bar One Piece Construction Oil Pump Type Nautomatic High Vibration Absorption System Steel Type Vibration Should Not Exceed 7M / S2. Nweight Of Power Head ( Without Guide Bar And Chain ) Should Not Exceed 11Kg Nfeatures Nadjustable Oil Pump, Quick Release Air Filter, Durable Magnesium Alloy Crankcase, Three Piece Crankshaft, Low Vibration- Inertia Activated Chain Brake Mechanism Nrecommended Spare Along With Each Chain Saw N 1. Spare Chain And For Chainsaw Sizes 36 Inch And 42 Inch. Qty 2 Nos. Each N 2. Chain Filling Kit For Re-Sharpening Chain. Qty 1No. N 3. Spare Guide Bar Sizes 36 Inch And 42 Inch. Qty 1 No. Each N 4. Spare Air Filter. Qty 1 No. N Bi01010001010000000000000515bi0100001123 6 Nos 13 1.12 Hand Held Gas Detector Size: 4.4X 2.4X 1.1.Inm / 11.3X6.0X 2.9 Nweight: 6Oz. / 171G Ntemperature: -4To+1220F / -20 To+50 N Humidity: 0%-95% Rh ( Non -Condensing ) Nalarms: Visual, Vibrating , Audible , ) 95 Db ) N -Low, High, Stel, Twa, Ol ( Over Limit ) N Tests: Audible / Visual Alarms On Activation, N Sensors, Battery, And Circuitry ( Continuous ) Npump: Compatible With The Sampler Motorized Sampling Pump Ntypical Battery Life: 10 Hours ( Typical ) ; Recharges In Less Than 4 Hours Nuser Options: N• Confidence Beep N• Set Stel Interval N• Sensor On / Off N• Latching Alarms N• Safe Display Mode N• Stealth Mode N• Calibration Lock N• Auto Zero On Start Up N• O2 Auto Calibration On Start Up N• Set Bump Test Interval N• Intelliflash Interval N• Combustible Gas N• Measurement ( %Lel Or % By Volume Methane ) N• User -Settable Calibration Gas Level N• Force Bump Test When Overdue N• Force Calibration Whenever Overdue N• Low Alarm Acknowledge N• Language Choices ( Five ) N• Set Custom Start Up Message Nwarranty: Full Two -Year Warranty Including A Sensors Bi01010001010000000000000515bi0100001124 2 Nos 14 1.13 Chain Saw ( Wood Cutter ) Specification For Petrol Operated Chain Saw- 42 Inch Ntwo Stroke Engine Ncylinder Displacement Minimum 115 Cc Npower Output Minimum 8Hp Nfuel Tank Capacity Minimum 1.2 Liters Nsound Pressure Level At Operator Ear 102 Dm ( A ) Ntorque Maximum 7.7 Nm Nrecommended Bar Length Nsolid Guide Bar One Piece Nconstruction Noil Pump Type Automatic Nhigh Vibration Absorption System Steel Type Nvibration Dampers Should Be Available Nfront Handle Vibration Should Not Exceed 7M / S2. Nweight Of Power Head ( Without Guide Bare And Chain ) Should Not Exceed 11Kg. Nfeatures Nadjustable Oil Pump, Quick Release Air Filter, Ndurable Magnesium Alloy Crankcase, Nthree Piece Crankshaft, Low Vibration – Inertia Nactivated Chain Brake Mechanism Nrecommended Spares Along With Each Chain Saw N5 Spare Chain And For Chainsaw Sizes 36 Inch And 42 Inch Qty 2 Nos. Each N6 Chain Filling Kit For Re-Sharpening Chain Qty 1No. N7 Spare Guide Bar Sizes 36 Inch And 42 Inch Qty 1 No. N8 Spare Air Filter Qty 1 No. N Bi01010001010000000000000515bi0100001125 5 Nos
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Ladakh View Result →
46.
Environment and Forests #8820003 Technical Bid
Supply Of Disaster And Rescue Equipments.- 2 1.01 Stretcher Dimension: 1830 Mm ( ! ) , 420 Mm ( W ) Nweight: 5 Kg Nct / Mri Compatible And Radio Lucent Nmaterial ; Carbon Fiber Or Fiber Glass Material Nseparate Hand Hold And Restraint Hold With Smooth Edges For Each And Comfortable Lifting With Velcro Straps. N Bi01010001010000000000000515bi0100001113 20 Nos 3 1.02 Stretcher Folding 2 Fold Type Bi01010001010000000000000515bi0100001114 15 Nos 4 1.03 Hand Operator Siren As Per Gem Specification Bi01010001010000000000000515bi0100001115 3 Nos 5 1.04 Crowbar 1.5 Dia A ) Size; Length 24” Nb ) Diameter Of Rod; 1” Nc ) Material Made Of Tempered Steel Nd ) Attachment; Claw Attachment For Removing Nails. Nbis Specification Ne ) The Bars Shall Be Heat Treated To Obtain A Minimum Hardness Value Of 320 Hv. Nf ) The Material Shall Be Suitable Quality Steel Such As Wrought Steel Ng ) The Bars Shall Be Foraged Clean& In One Piece. Nh ) Cutting Ends Of The Bars May Be Rounded Off &Finished Ground. N Bi01010001010000000000000515bi0100001116 15 Nos 6 1.05 Pick Axe With Handle Reputed Brand Bi01010001010000000000000515bi0100001117 50 Nos 7 1.06 Safety Torch Fire Proof A ) Three Cell Water Proof Torch Nb ) Power Source- Carbon Zinc Only ; 3Xd Cell Bulb / Lamp: Pr-3 Nc ) Light Output; 15, 000 Bean Candle Power Nweight ( Without Batteries ) -6 Oz ( 17Kg ) Water Proof Nd ) Suitable For Use In Hazardous Atmosphere Ne ) Spare Bulb Compartment Nf ) Ring Hanger ( 3 Way Switch ) – On –Off-Flash Ng ) Three Way Switch; On:Off:Flash Nh ) Anti Roll Tube Ni ) Over Sized Faceted Reflector For More Light Nj ) Ui Approved N Bi01010001010000000000000515bi0100001118 40 Nos 8 1.07 Fluorescent Jackets A ) Description Nflorescent Colour Jacket With 50Mm Glass Bead Type Reflecting Tape In 2 Vertical And 1 Horizontal Band In Front And Back Same. Nfront Opening And V Neck Design. Nb ) Background Fabric N1005 Polyester. 125 Gsm Made From Bright Glossy Yarn, Adhering To En 471 Standard. It Shall Have Excellent Color Fastness And Should Be Uv Treated. Nc ) Colour Nflorescent Reddish-Orange / Fluorescent Lime / Yellow. Nd ) Reflecting Tapes Nglass Bead Type Reflecting Tape, En471 Class 2 Approved, 50Mm Wide, Color Of Reflecting Tape Will Be Silver Grey. Ne ) Accessories N1. Binding: Binding Will Be Black In Colour, 100% Plyster, Fabric Will Be Used In Binding With Excellent Colour Fastening. N2. Velcro: Velcro Shall Be 25Mm Wide And 50Mm In Length Positioned Vertically For Perfect Fastening. The Velcro Will Be Black. Nsize: Length 27 Inches And Width 23 Inches. N Bi01010001010000000000000515bi0100001119 40 Nos 9 1.08 Safety Helmet With Ear Muff A ) Isi Marked: Is-2925 Of 1984 Nb ) Shell Material: High Density Polyethylene ( Hdpe ) Nc ) Adjustable And Detachable Head Band With Nape Nd ) Strap Material: Low Density Polyethylene ( Ldpe ) Ne ) Adjustable Chin Strap: Nylon Chinstrap And Rachet Type Head Band Nf ) Slot Fix Design: Provision For Easy Clip On Accessories Like Face Shields And Ear Muffs. Color: Yellow N Bi01010001010000000000000515bi0100001120 50 Nos 10 1.09 First Aid Box Reputed Brand Bi01010001010000000000000515bi0100001121 100 Nos 11 1.1 Medical First Responder Kit Reputed Brand Bi01010001010000000000000515bi0100001122 10 Nos 12 1.11 Water Bottle A ) Designed To Carry On The Pack. Nb ) It Should Have Illuminate Panels For Improved Visibility And Safety Nc ) It Should Have A Fuel Window For Bladder Level. Nd ) It Shall Have Extra Wide Bladder Port And Quick Connect Access. Ne ) It Must Have Insulated Bladder Compartment For Keeping Water Cool. Nf ) Ergonomic Back Panel W / Perforated Foam For Improved Ventilation Ng ) Contoured Shoulder Strap For Comfort And Breath Ability. Nh ) Adjustable Sternum Strap. Ni ) Light Clip Strap. Nj ) Large Cargo Compartment With Organizer. Nk ) Magnetic Clip For Valve Attachment. Nl ) Bungee For Extra Storage. Nm ) Adjustable To Fit Medium Large Body Types. Nn ) All The Materials Used On The Constructions Of Outdoor Back. No ) Carry Water Bottle Should Be Durable. Np ) The Bottle Should Be Light Weight And Made From The Highest Quality Materials. Nq ) It Should With Stand Disinfections Of The Bottle Using Bleach. Nr ) The Weight Of The Bottle Should Not Be More Than 4 Lbs. Ns ) It Should Be Provided With A Pipe Which Can Be Drawn Water. Nt ) While The Bottle Or Canteen Is On The Back N Bi01010001010000000000000515bi0100001123 25 Nos 13 1.12 Casualty Bag ( Adult ) As Per Gem Category Fluid Absorbing Body Cover Bag Adult Bi01010001010000000000000515bi0100001124 60 Nos 14 1.13 Blanket Red Type: Fire Nmaterial: Aluminum N Bi01010001010000000000000515bi0100001125 60 Nos 15 1.14 Electric Drill Machine Input Power; Not More Than 600 W. Nno Load Speed; Variable 1000-2400 Rpm Nweight; Less Than 3 Kg Nshock Proof Body With Different Sizes Of Bits For Both Metal & Wood N Bi01010001010000000000000515bi0100001126 6 Nos 16 1.15 Reciprocating Saw Rated Power; Not Less Than 900 W. Nat 220-240 Volts Nstroke Rate ( At No Load ) ; Not Less Than 28Mm. Ncutting Dep0th ( Wood ) Above 165 Mm Nwith Required Accessories And Electrical Cord Of Minimum 5 Mtr Length With 5 Amp Three / Two Pin Plug Along With An Extension Cord Of 10 Mtr. Nrate Current; Not More Than 6 Amp Nnoise Level <100 Db Nspare Blades For Metal & Wood Cutting 10 Nos Nwith Suitable Protective Carry Case. Nweight; Not More Than 5 Kg With Blade. Nthe Starting Current Drawn By The Motor Should Blowing. This Also Prevents The Tool Starting With A Jolt. Nair Cooled. N Bi01010001010000000000000515bi0100001127 5 Nos 17 1.16 Breathing Air Apparatus Set Spare Cylinder 1. General: The Self Contained, Positive Pressure And Open Circuit Air Breathing Apparatus Shall Be Certified For Use By The Fire Fighters For 45 Minutes Total Working Duration. N2. Technical Specification: Na ) Back Plate And Body Harness-This Shall Be Made Of Non-Metallic, Antistatic, Impact, Chemical & Fire Resistant Material And Orthopedically Designed And Manufactured In Conformity To En / Din / Us / Bis 10245 Part Ii Standards And Certified For Use Y The Fire Fighters, It Shall Facilitate Mounting Of Air Cylinder Through Cam Lock. The Body Harness Shall Be Wearer Friendly And Safe For Carrying Load While All Buckles Shall Be Quick Release Type. Nb ) Pressure Reducer- This Shall Be So Designed So As To Meet The Air Demand For Two Users Simultaneously At A Stable Pressure On The Outlet With Inlet Pressure Varying From 300 Bars To 20 Bars And Shall Confirm To Provisions In En 137-20002 Class Ii. Nc ) Face Mask- This Shall Be Reverted Edge Seal Type And Made Of Flame Resistant Material Confirming To En 136. The Reflex Seal On The Outer Mask Shall Be So Designed So As To Facemask To Reduce Dead Space, Speech Transmitter For Clear Voice Reproduction And A Wide Angle Panoramic Vision Visor Made Of Polycarbonate Material And Shall E Self- De- Misting Type. The Head Straps Shall Be Easy To Tighten And Quick To Release. Nd ) Demand Valve- The Lung Operated Demand Valve Design Shall Either Be Titling Diaphragm Type Or Piston Type. This Shall Be Provided On The Facemask And Connected To The Pressure Reducer With The Help Of Rubber Hose Through Quick Connector. The Demand Valve Shall Be Rated For Minimum 500Lpm Airflow And Shall Activate With The First Breath. Ne ) Pressure Gauge: This Shall Be Bourdon Pressure Gauge With Luminescent Dial With Reassure Making In Bar And Encased In Fire Resistant Rubber Cover. The Gauge Shall Be Connected To Pressure Reducer Through Non-Metallic Rubber Hose. Nf ) Hoses- The Low Pressure Hoses Shall Be Flexible And Non-Kinking Type And Suitably Reinforced To Withstand 30 Bar Air Pressure While The High-Pressure Hoses Shall Either Be Flexible Or Rigid Metallic Tube Suitably Secured To The Back Plate So As Not To Obstruct The Movement Of The Weaver. Ng ) Warning Whistle- This Shall Be Fitted Either On The Back Plate Or Provided Along With The Pressure Gauge Assembly And Shall Be Automatic In Operation Giving Audible Alarm Of Minimum 90Db Intensity At 1 Meter Distance Of Low Cylinder Pressure In The Range Of 50+5 Bar. Nh ) ‘Y’ Manifold For Additional Connections- This Set Shall Have Provision Through Suitable Placed ‘Y’ Manifold To Facilitate Receiving Air From A Different Source And Supplying Air For Additional Facemask. Ni ) Air Cylinder- This Shall Be Corrosion And Impact Resistant And Made Of Light Alloy Fully Wrapped. The Size Of The Cylinder Shall Be Such That It Can Hold Sufficient Quantity Of Air ( Not Less Than 1800 Liters ) For Providing 45 Minutes Total Working Duration When Charged At 300 Bars Pressure. The Cylinder Shall Be Provided With Cross Flow Valve And En 144+2 Compliant. The Cylinder Shall Be Duly Approved By The Chief Controller Explosive Nagpur And Shall Be Capable Of Withstanding A Min. Hydraulic Testing Pressure Of 450 Bars. Nj ) Weight- The Weight Of The Ready To Use Set Shall Not Be More Than 12.5Kgs. N3. Approval: The Complete Set Shall Have Relevant En Or Equivalent Approval And Certificate To This Effect Shall Be Furnished Along With The Offer. Ntechnical Evaluation:- The Technical Evaluation Of The Scba Shall Be Subjected To The Following: Na ) Meeting The Requirement As Mentioned From Sl. No. 1 To 3 Nb ) Designed In Conformity To En / Din / Us Standards, Conformity Certificate And Ccoe Certificate To Be Submitted Along With The Offer. 2 Nos 18 1.17 Circular Saw Circular Saws Are Heavy Duty Power Tools Required In Search And Rescue Operation For Various Carpentry Tasks Associated With Access And Extrication Like Cutting And Sawing Of Timber, Wooden Beams, Door Frames, Fallen Trees Etc. Typically These Are Light Enough To Be Used By One Operator And Are Electrically Powered. N1. Electrically Powered Motor Operating In 100 To 250 Volts With Power Consummation Between 1700 To 2500 Watts. 15 Ampere Three Core Electrical Cord 5 Meter Length With Three Pin Plug Will Be Provided. N2. Idling Speed Of Motor Upto 2000 To 3000 Rpm With A Max. Load Rpm Of 1200 To 1500 Rpm. The Motor Should Have A Min. Endurance For Continuous Operation Upto 60 Minutes. N3. Should Incorporate Easily Locatable Push Button Start And An Electric Brake Quick Stoppage. N4. Size Of Blade: More Than 12 Inches Diameter With An Arbor Not Exceeding 3.2Cm ( 1.25Inches ) . The Blade Provided Will Be Carbide Tipped Blade With A Min. 32 Teeth. N5. The Cutting Capacity Of The Blade Should Exceed 125Mm At 90 Degrees And 82Mm At 45 Degrees The Saw Should Enable Blade Rotation And A Dept Adjustment Lever. A Shaft Lock Will Be Provided For Effecting Blade Damage. N6. The Weight Of The Saw With Blade Should Not Be More Than 17Kgs. N7. Rubberized Wrap Around Saw And Support Handles With Protection Arrangement For Shielding Operator From Debris And Kick Backs Will Be Provided. N8. Noise Level During Operation At Full Lead Should Not Exceed 100Bat A Distance Of One Meter. Naccessories N9. The Equipment Shall Be Supplied With The Following: Na ) Two Spare Carbide Tipped Blades. Nb ) Toolkit Nc ) Operating And Maintenance Manual Evaluation N10. Vendor Will Indicate All Technical Details Of The Equipment To Be Supplied For Evaluating Physical Testing Of Equipment For Cutting Capacity, Endurance And Operator Safety And Ease Of Operation Will Be Carried Out During Evaluation. N 6 Nos 19 1.18 Hand Held Gas Detector Size: 4.4X 2.4X 1.1.Inm / 11.3X6.0X 2.9 Nweight: 6Oz. / 171G Ntemperature: -4To+1220F / -20 To+50 N Humidity: 0%-95% Rh ( Non -Condensing ) Nalarms: Visual, Vibrating , Audible , ) 95 Db ) N -Low, High, Stel, Twa, Ol ( Over Limit ) N Tests: Audible / Visual Alarms On Activation, N Sensors, Battery, And Circuitry ( Continuous ) Npump: Compatible With The Sampler Motorized Sampling Pump Ntypical Battery Life: 10 Hours ( Typical ) ; Recharges In Less Than 4 Hours Nuser Options: N• Confidence Beep N• Set Stel Interval N• Sensor On / Off N• Latching Alarms N• Safe Display Mode N• Stealth Mode N• Calibration Lock N• Auto Zero On Start Up N• O2 Auto Calibration On Start Up N• Set Bump Test Interval N• Intelliflash Interval N• Combustible Gas N• Measurement ( %Lel Or % By Volume Methane ) N• User -Settable Calibration Gas Level N• Force Bump Test When Overdue N• Force Calibration Whenever Overdue N• Low Alarm Acknowledge N• Language Choices ( Five ) N• Set Custom Start Up Message Nwarranty: Full Two -Year Warranty Including A Sensors N 2 Nos 20 1.19 Combination Cutter ( Battery Operated ) With All Accessories ( I ) The Technique And Function Required For Battery Operated Hydraulic Combo – Tool To Be Used For Rescue Operation By Special Rescue Team In Ease Of Traffic Accidents, Building Collapse And Natural Disasters Confined Space Rescue, High Rise Building Rescue Etc. N ( Ii ) The Specification Comprises The Technical Basis For Procurement, Acceptance And Testing Of The Hydraulic Rescue Set. The Equipment Should Be Able To Work Without Failure In Heavy Dust, High Humidity, Heavy Tropical Rain Conditions And Temperatures From -250C +50 0C N ( Iii ) The Equipment Should Be Completely Independent From Any External Hydraulic Power Unit Or Hoses And Should Be Operated Independently From Each Other By Rechargeable High Capacity Li-Ion Battery Or An Electric Power Connector I. Npurpose Nthe Rescue Set Is Intended For Use In Life Saving Operations Of Persons Entrapped In Demolished Structures, Air Crafts An Train Wrecks And Damages Vehicles By Accomplishing The Following: N ( I ) Widening Openings Between Movable Ruins N ( Ii ) Cutting Of Building Constructions Steel Rods, Metal Members, Sewage Pipes, Water Pipes Etc. N ( Iii ) Creating Cut Outs In Sheet Metal Panels By Tearing The Sheet Metal Or Removal Of The Panel’S Hinges From Their Place Nrescue Sets Composition N1 ) The Battery Operated Rescue Set Should Be Include The Following Components: N ( A ) Combi-Tool ( B ) Accessories ( Ii ) All Tools / Equipment Should Be Comply With Requirements F En 13204 Or Nfpa 1936 Standard N ( Iii ) Description The Battery Operated Hydraulic Rescue Tools Should Meet The Following Requirements. ( I ) The Combi-Tool Should Be Operate On A Working Pressure Of At Least 700 Bar. The Battery Should Be 4 To 5 Ah Lithium Ion Rechargeable Battery. The Battery Should Be Click On / Click Off Type For Quick Changing Of Battery. The Battery Should Be Capable Of Being Recharged Fully Within 60 Minutes. ( Ii ) The Combi-Too Should Be Operated Independently And Should Be Provide The Max. Safety And Protection For The Operator And The Causality. The Combi-Tool Should Be Equipped With High Capacity Flash Led Lights Integrated In The Handle To Light Up The Working Space In Case Of Low Visibility . ( Iii ) The Combi-Tool Should Be A One-Man Operated Light – Weight Tool, Meaning That One Person Should Be Able To Position., Guide And Operated The Tools , Without Needing Assistance By Another Person. ( Iv ) The Combi-Tool Should Be Provided With Carrying Handle Which Allows The Operator To Reposition The Tool From One Side To The Other ( Left To Right And Back ) . The Carrying Handle Should Be Mounted In Such A Way That The Tool Is Fully Balanced, Even When The Tool Is Picked Up With One Hand. The Position Of The Carrying Handle And The Control Handle Should Be Allow Easy Operation For Right – Handed As Well As Left – Handed Operators. ( V ) The Combi-Tool Should Be Resistant Against Dust, Heavy Rain , Spilling Water Under Various Temperature Conditions ( Vi ) The Combi- Tool Should Be Provided With The Twist Dead Man’S Control Mechanism With Automatic Neutral Position .The Control Handle Should Have Suitable Grip To Provide Full Grip For The Operator Hand ( No Finger Or Dumb Control ) . The Dead-Man’S Handle Must Be Easy To Operate In Any Situation And Position Of The Tool ( Vii ) The Control Mechanism Must Be Part Of The Handle In Order To Ensure A Safe Operation .The Main Valve Should Allow Precise Proportional In Order To Influence The Working Speed Of The Tools. To Avoid Confusions For The Operators, The Operation Mode Should Be Similar For All Tools . The Dead-Man’S Handle Should Be Easy To Operate From Any Given Position The Tools Or The Operator May Be In. ( Viiii ) The Tool Body Should Be Made Out Of High Quality Thermoplastic Material That Assures A Solid Construction Combined With Unacceptable ( Low ) Weight . The Tool Body Should Be Assure Highest Stability And A Long Service Lifetime. N ( Ix ) All Hinges, Pins, Levers, Should Be Made Out Of High Tensile ( Heat Treated ) Tool Steel, And Protected Against Corrosion. The Blades Of The Cutter Should Be Of Dropped-Forged Special Steel Alloy To Ensures A Long Service Lifetime ( X ) The Arms Of The Spreader Should Be Made Out Of Height Alloy Forged Light Metal. All Movable Parts Should Be Covered To Ensure The Highest Safety For The Operator. All Tools And Accessories Should Be Fully Operational For Longer Periods At Temperatures Of -25 0C Upto +50 0C ( Ix ) Spare Parts Should Be Available With The Local Dealer For At Least 10 Years. Ntechnical Specification Of Battery Operated Hydraulic Combi-Tool N1. Cutting Force Upto 155Kn N2. Steel Cutting Bar 22.2 Mm N3. Blade Operating With Combi Tip 207 Mm N4. Spreading Force 28-700Kn N5. Spreading Distance With Door Opener Tips 184 Mm N6. Spreading Distance With Combi Tips 215 Mm N7. Dimensions With Combi Tips 796X195x210 Mm N8. Weight ( Without Battery ) Less Than 10 Kg N9. Battery Weight Less Than 1.5 Kg N 2 Nos 21 1.2 Chain Saw ( Wood Cutter ) Specification For Petrol Operated Chain Saw- 42 Inch Ntwo Stroke Engine Ncylinder Displacement Minimum 115 Cc Npower Output Minimum 8Hp Nfuel Tank Capacity Minimum 1.2 Liters Nsound Pressure Level At Operator Ear 102 Dm ( A ) Ntorque Maximum 7.7 Nm Nrecommended Bar Length Nsolid Guide Bar One Piece Nconstruction Noil Pump Type Automatic Nhigh Vibration Absorption System Steel Type Nvibration Dampers Should Be Available Nfront Handle Vibration Should Not Exceed N7m / S2. Nweight Of Power Head ( Without Guide Bare And Chain ) Should Not Exceed 11Kg. Nfeatures Nadjustable Oil Pump, Quick Release Air Filter, Ndurable Magnesium Alloy Crankcase, Nthree Piece Crankshaft, Low Vibration – Inertia Nactivated Chain Brake Mechanism Nrecommended Spares Along With Each Chain Saw N5 Spare Chain And For Chainsaw Sizes 36 Inch Nand 42 Inch Qty 2 Nos. Each N6 Chain Filling Kit For Re-Sharpening Chain Nqty 1No. N7 Spare Guide Bar Sizes 36 Inch And 42 Inch Nqty 1 No. N8 Spare Air Filter Qty 1 No. N Bi01010001010000000000000515bi0100001128 3 Nos
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Ladakh View Result →
47.
Educational and Research Institute #8742757 Technical Bid
Supply Of Laparoscopic Surgical Set For New Atc Of J . N . Institute Of Medical Sciences , Porompat , Imphal East , Manipur . -2 5 Mm 0, Standard Grasper / Dissector 3 5 Mm 0, Mixter Grasper / Dissector 45 Angle 4 5 Mm 0, Babcock Grasper 5 5 Mm 0, Allis Grasper, Medium Version 6 5 Mm 0, Debakey Curved Grasper ( With Atraumatic Teeth, Dbl-Action ) 7 5 Mm 0, Alligator Grasper, ( Retro Facing Teeth, Dbl- Action ) 8 5Mm 0, Double Cup Fundus Maxi Grasper 9 Trocar ( 6 Mm ) With Working Length Of 10.5 Cm And Multifunctional Valve. 10 Trocar ( 11 Mm ) With Pyramidal Tip, Multifunctional Valve, Insufflations Stopcock 11 Clip Applicator- 10 Mm, Both For 300 And 400 Size Clip 12 High Definition Camera With Integrated Image Module + In Build Recording System 13 Xenon Cold Light Source ( Manually Adjustable Brightness Controller, Universal Light Guide Connection, Bulb Usage Meter Warning Light ) 14 Co2 Insufflator ( High Flow Insufflations Of Upto 20 L / Min., Fully Automatic Operation, Clear Adjacent Bar Diagram For Set Values And Actual Values ) 15 Color Monitor System ( High Definition Flat Screen Monitor Desktop With Stand Color System Pan / Ntsc Resolution Max. 1920 X 1200 ) 16 Electrocautery Machine ( Capable Of Monopolar Bipolar Coagulation And Blended Cut Compatible With Laparoscopic Equipments ) 17 Fiber –Optic Choledochoscopy ( Complete Set ) 18 5 Mm 0, Fenestrated Grasper, ( 16 Mm Dbl –Action Jaw ) 19 5 Mm 0, Blunt Atraumatic Grasping Forceps, ( Double –Action ) 20 5 Mm 0, Metzenbaum Scissors, ( Straight, Short Blade ) 21 5 Mm 0, Metzenbaum Scissors, ( Curved , Long Blade ) 22 5 Mm 0, Biopsy Spoon Forceps, ( With Tooth ( Semi- Type ) , Dbl-Action ) 23 High Frequency Cord For 5Mm Hand Instruments ( With Monopolar Electrodes, Spatula Tip ) ( With Monopolar Electrodes, Ball Tip ) ( With Monopolar 3 Electrodes, Hook Ti3p ) 24 Knot Pushers Eye Type, Length 36 Cm 25 Suction Irrigation Cannula With Coagulation ( Trumpet Type ) 26 Needle Holder, Straight 27 Reducing Sleeve, 5.5 Mm 28 Telescope 30 Degree ( 10 Mm ) 29 Veres Needle
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Manipur View Result →
48.
Communications and Information Technology  #8727398 Technical Bid
Supply And Implementation Of Computer Hardware . Servers, Storage, Desktop Computer, Laptop, Peripherals, Ups, Lan Items And System Software And Other Related Items ) 1 Scanner Type Flatbed Colour Image Scanner, Optical Resolution: 4800 Dpi * 4800 Dpi 2 Laser Printer: All In One: Print Speed: 28 Ppm 3 Dot Metrics Printer Number Of Pins:24 Pins, Number Of Columns At 10 Cpi 4 Laserjet Printer: Printer Speed:25 Ppm, Resolutions:1200*1200 Dpi, Three Years Comprehensive Warranty 5 Key Specifications: Printer Type: 9 Pin, 80 Columns Sidm, Print Speed:Hsd 10 Cpi / 12 Cpi:347 Cps, Draft 10 Cpi / 12 Cpi / 15 Cpi:260 Cps 6 Printing Method, Impact Dot Matrix, Number Of Pins, Number Of Columns 136 Columns 7 Desktop Computer Make: Cpu: Intel Core I5 8Th Gen Core I3 8100 / Amd 2200G Processor Or Equivalent, Intel H370 Chipset Or Amd Or Equivalent, Memory: 4 Gb Ddr 4 Ram Expandable To 32 Gb 8 Uninterrupted Power Supply Ups 3 Kva, Make: Delta / Apc / Emerson, Configuration: Mnc Make True On-Line 3Kva / 2.4 Kw 1-Phase Input / 1- Phase Output, Single –Phase / 2- Wire & Gnd ( 1 Phase & Neutral + Ground ) , Input Voltage Range, 80-280Vac, Range ( Full Load ) 176~280Vac, Nominal Input Frequency, Input Power Factor>0.97 @ Full Load ) , Generator Compatibility To Genset Supply Required, Isolation Transformer Inbuilt At Output Side, Output Power Factor 0.8 Crest Factor 3:1 On Full Load ( Minimum ) Automatic Bypass Switch Ups Should Be Capable Of Automatic Change Over To Bypass. 3. Battery Cable, 4. User Manual “Manufacturer” Qms: As Per Iso 9001:2008 Ems: As Per Iso 14001:2004 Oshas: As Per Iso 18001:2007 Three Years Comprehensive Warranty. 9 Printer Type, 9 Pin, 136 Column Sidm, Print Speed In 12 Cpi Hsd, 539 Cps, Print Speed In 10 Cpi Hsd, 476 Cps, 10 Networking 10.1 Patch Pannel 24 Port Cat 6 10.2 4 U Rack 10.3 6 U Rack 10.4 9 U Rack 10.5 12 U Rack 10.6 1 Mtr Patch Cord 10.7 3 Mtr Patch Cord 10.8 Utp Cat 6 Singal I / O With Surface Mount Box 10.9 Jack Pannel Fixing 10.1 I / O Box Fixing And Testing 10.11 Fixing Of All Rack 10.12 Cat 6 Cable With Conduct Per Mtr 11 Cat 6 Network Wire—Utp Cable Tia-568C.2 Category -6 Iec-60332-3 / Ul 1666 ( 305 Mtrs / 1000 Feet Per Box: This Cable Well Exceeds The Requirements Of Tia / Eia-568-C.2 And Iso / Iec 111801 12 Cat 6 Utp Patch Cable, Tia-568C Category-6 Ul-Listed Te ( Amp ) / Siemon / Panduit: Length Shall Be Available In 1 / 2 / 3 / 5 Meter Or Equivalent Length In Feet Etc 13 Pcb Based Information Outlet ( I / O ) Rj45, Tia 568C Category-6 Termination Of Category -6 Utp Cable Listed Te ( Amp ) / Siemon / Panduit ( Pannet ) 14 Faceplate Single Port Te ( Amp ) / S 15 Faceplate Dual Port ( Work Area End ) Te 16 24 Port Jack Panel 17 Printer Type Cheque Printer:80 Column, Print Speed-347 Cps, 10 Cpi Draft, Ribban Life 2.5 Million Characters, Printhead Life-400 Million Strokes / Wire. Interface- Usb And Parallel / Serial, Copies 1+3, Input Data Buffer -128 Kb 18 Print Type :9 Pin, 136 Column Sidm, Print Speed : Print Speed In 12 Cpi Hsd: 539 Cps, Print Speed In 10 Cpi Hsd:476 Cps 19 Layer 2 Manageable Gigabit Switch -28 Port 20 Desktop Computer Make: Cpu: Intel Core I5 8Th Gen Core I5 8500 / Amd 2200G Processor Or Equivalent , Intel H370 Chipset Or Amd Or Equivalent , Memory : 4 Gb Ddr 4 Ram Expandable To 32 Gb 21 Laser Jet Printer 14 Ppm / 2Mb Ram / Monthly Duty Cycle Upto 5000 Pages Three Years Onsite Warranty 22 Ups: Rating: 6 Kva / 6 Kw 1- Phase Input / 1-Phase Output, Input Facility- Phase / Wires Single- Phase / 2-Wire & Gnd ( 1 Phase & Neutral + Ground ) Nominal Voltage 200 / 208 / 220 / 230 / 240 Vac, Nominal Voltage Range “200 / 208 ( De- Rating To 90% ) : 100Vac~280Vac 220 / 230 / 240: 100Vac~280 Vac”, Audible Alarms Replace Battery, Overload Warning & Shutdown, High Temp, Low Battery, High Temp Warning & Shutdown Backup Required 3 Hour
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
Tamil Nadu View Result →
50.
Tourism #8648630 AOC
Integrated Development Of Craft Center At Sambalpur- 1 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 2 Additional cost for Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 3 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 4 Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 5 Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. 6 R.C.C. work ofM-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 7 R.C.C. work ofM-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 8 R.C.C. work ofM-25 for beam & column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 9 Ground Floor 10 R.C.C. work ofM-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 11 Ground Floor 12 R.C.C. work ofM-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 13 Ground Floor 14 R.C.C. work ofM-25 for slope roof having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 15 Ground Floor 16 Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction ofEngineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) 17 Ground Floor 18 Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 19 Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 20 Ground Floor 21 Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 22 Ground Floor 23 Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 24 Ground Floor 25 Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. 26 Ground Floor 27 Providingtile flooringexterior gradevitrified tiles of premium grade 10mm thick conforming to IS 4457 of 300mmx300mm of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 28 Ground Floor 29 Providing 40cmx40cm sizespecial plain/printed series matt finish ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. 30 Ground Floor 31 Providing 30cmx60cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. 32 Ground Floor 33 Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 34 Ground Floor 35 Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 36 Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. 37 Providing and fixing in position WPC frames of following approved size to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. 75mm x 50 mm 38 Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 39 Providing and fixing lockable openable system Aluminum works for openable doors applications. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame. The outer frame Depth will be 72mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment. Glass to be used is 6mm – 8mm toughened, make Saint Gobain. The system should allow the application of glazing or panels with thickness up to 5-8mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1year warranty on wearing parts 40 Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / SHUECO/ ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 104 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5- 6 mm clear toughened.The system should allow glass thickness up to 10 mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 41 Providing and fixing Anodized System Aluminum fixed windows of TOSTEM / SHUECO/ ALUMIL make, suitable for 2.4 KPA wind load. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 6 - 8 MM toughened depending on grid size. Beyond 6000 mm width, MS section (size 61 x 122 mm) coupling to be used with cover profiles of same anodized colour. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 42 Providing and fixing Anodized System Aluminum glass louvers of TOSTEM / SHUECO/ ALUMIL make natural air flow ventilators. The extruded aluminium sections shall be made from Grade 6063- T5 Anodized with Tex guard coating. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 50 - 72 mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts. 43 Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 44 Supplying, fitting and fixing of M.S grill gates with top and bottom rails (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25%) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 45 Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/Cand stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. 46 Providing & fixing of Greenlam Sturdo Essentia Collection- Serene Restroom Cubicle (of following standard dimension which includes 600mm door size width) self-supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available color hardwares as per manufacturers specifications & Architects instructions like (1) Self closing hinges in Nylon Polyamide grade 6 in gloss finish in available colors (2) Soft closing thumb turn lock made in nylon polyamide grade 6 in gloss finish in available colors (3) Single Coat hook in nylon polyamide grade 6 in gloss finish, available in similar available colors (4) U & F- profiles in Aluminium alloy grade 6063-T6 with powder coating in available colors (5) Nylon polyamide grade 6 Adjustable Leg (6) Top rail along with Nylon Polyamide grade 6 with end cap is a Round D shaped extrusion made of Aluminium alloy grade 6063-T6 with Powder Coating in available colors, (7) Rubber, (8) Screws & wall Plugs (SS316). The top fitting should consist of Matt finish aluminium alloy grade 6063-T6 in avilable colors, which will get fixed on pilasters with SS Screws, All screws will of 316 Grade in stainless steel. All pilasters are supported by grade- 6 Nylorn Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Toilet Cubicle Partitions with standard dimensions of 1995mm Height x 1000mm Width x 1500mm Depth (which includes 600mm door width) 47 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 48 Ground Floor 49 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 50 Ground Floor 51 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 52 Ground Floor 53 Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 54 Ground Floor 55 Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 56 Ground Floor 57 Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 58 Ground Floor 59 Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 60 Ground Floor 61 Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 62 Ground Floor 63 Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 64 Ground Floor 65 Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. 66 Ground Floor 67 Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. 68 Providing kota stone flooring using Rajasthan kota stone of approved quality, colour and size of 25mm minimum thick in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the kota stone with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the kota stone, if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 69 25 mm. average thick artificial stone flooring with cement punning laid to proper slope with cement concrete of proportion (1:2:4) using screened and washed sharp sand for mortar with black hard crusher broken granite stone chips of approved quality and from approved quarry, washed and cleaned laid in two layers i.e. the bottom layer being 19 mm . thick and top layer of 6mm. thick with 12mm. to 20. size black hard crusher brokenstone chips (20mm size chips not to exceed 25%) including chipping and chiseling and cleaning the top surface of the floor slabs in upper floors, including rounding of corners, watering and curing with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge 70 Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) 71 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 72 Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. 73 Construction of granular sub-base by providing Close graded Granular subbase Grading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) etc complete as per direction of Engineer-in-charge. 74 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works 75 Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechine vibrated free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 76 Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 77 Providing and painting two coats with synthetic enamel paint over a coat of cement primer of approved quality and approved shade confirmming to ISI on cement work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 78 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. 79 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 80 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge 81 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001 82 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm 83 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm 84 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 85 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. 86 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. 87 Plastic Waste bin Rectangular alongwith fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 350x350 mm Top Dia.250x250 mm Bottom Dia.850 mm Height pair Sintex, Nilkamal, Otto, Aristo 88 Plastic Waste bin without Wheel with Push type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level capacity 60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 89 Plastic Waste bin without Wheel with Swing lid type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 90 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding the cost of imported earth, sludge or manure). 91 Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. 92 Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead and lift. 93 Supplying and stacking at site dump manure fromdumping place nearest to site of work.(manure in stack will be reduced by 8% for payment) with all lead and lift. 94 Screened through sieve of I.S designation 20 mm. 95 Screened through sieve of I.S designation 16 mm. 96 Screened through sieve of I.S designation 4.75 mm. 97 Rough dressing the trenched ground including breaking clods. 98 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of up rooted vegetation with all lead and lift. 99 Fine dressing the trenched ground. 100 Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/and good earth to be paid separately). 101 Mixing earth and sludge or manure in proportion specified or directed. 102 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 103 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 104 Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). 105 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 106 Holes 60 cm dia, and 60 cm deep 107 Holes 45 cm dia, and 45 cm deep 108 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 109 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm 110 Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. 111 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. 112 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. 113 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) 114 Trees Plant 115 Shrubs Plant 116 Hedge Plant 117 Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 118 Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. 119 Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 120 Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 121 Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. 122 Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 123 Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. 124 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 125 Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. 126 Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 127 Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 128 Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 129 Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. 130 Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. 131 Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge. 132 Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. 133 Supply and stacking of Acacia auriculiformis plant of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 134 Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 135 Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. 136 Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. 137 Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. 138 Supply and stacking of Ficus nuda plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. 139 Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v 140 Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 141 Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. 142 Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. 143 Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. 144 Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. 145 Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 146 Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing springmade up ofalluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction of Engineer-in-charge. 147 Supplying all materials, labour, T&P and fixing 15mm dia CPBib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca 148 Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 149 TOTAL FOR CIVIL WORKS-(A) 150 PH WORKS 151 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20087 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 152 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet of Hindware make having cat no 20098 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 153 Supply all materials, labour,T&P for fitting and fixing of Pneumatic tank 3/6L with full frame andPneumatic faceplate in polished chrome of Jaquar make having cat no 517444 and 525732 or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, connecting pipe with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 154 Supply all materials, labour,T&P for fitting and fixing of dual flush PVC cistern of hindware sleek essence make or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 155 Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 49cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. 156 Supplying and fixing urinal of hindware make having cat no 60022/60023 or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. 157 Supplying and fixing 12mm thick toughened glazed urinal division plate of approved size with etching and polishing including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge. 158 Supplying all materials, labor T&P for fitting and fixing in all floors fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. 159 Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Jaquar Cat. No.-FLR 5083NK or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 160 Supplying all materials, labour, T&P and fixing standard sized15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 161 Supplying all materials, labour, T&P and fixing standard sized15mm dia pillar cock of Jaquar Cat. No.-FLR 5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 162 Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 163 Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 164 Supplying all materials, labour, T&P and fixing standard sizedCP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 165 Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 166 Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 167 Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 168 Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 169 Supplying all materials, labour, T&P and fixing standard sizedCP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 170 Providing all materials, labour,T&P and fittings and fixing of flush valve of Jaquar Cat. No.-PRS 073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 171 Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge 172 Providing and fixing fragrance disperser of Euronics make having cat no EA44 etc complete as per PH specification and direction of the engineer in charge 173 Providing and fixingcircular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge 174 Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 175 15 mm dia 176 20 mm dia 177 25 mm dia 178 32 mm dia 179 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 180 40mm dia 181 50mm dia 182 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 183 75mm dia 184 110mm dia 185 Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. 186 110mm dia Single Junction with door 187 110mm dia Double Junction with door 188 110mm dia Cowl 189 110mm dia Plain Bend 190 110mm dia SWR Door Bend 191 125mm x 110mm Gulley Trap 192 110mm dia Tee with door 193 110mm dia Single Junction without door 194 110mm dia Socket Plug 195 110mm dia Pipe clip 196 110mm diaCoupler 197 75mm dia Plain Bend 198 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 199 25mm Dia 200 32mm Dia 201 40mm Dia 202 50mm Dia 203 Providing & fixing of 50mm dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 204 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 205 Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 206 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 207 Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. 208 Supplying all materials, labour, T&P and fittings and fixing of 1000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 209 Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. 210 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 211 150mm dia 212 200mm dia 213 Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. 214 150mm Dia 215 200mm Dia 216 Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. 217 Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. 218 Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) 219 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 220 Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 221 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 222 Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) 223 150mm Dia 224 200mm Dia 225 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 226 Supplying and filling the pipeline trench with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 227 Supplying and construction of 100 user septic tank of standard size as per drawing, design and direction of Engineer in charge. 228 Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. 229 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 230 Rocky terrain with boulder formation for 300m depth 231 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). 232 Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 233 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 234 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 235 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 236 Supplying all materials, labours, T&P, fitting and jointing of 80mm dia double flanzed column GI pipe confirming to IS 1239/1968, medium class having IS mark of approved make / tata medium series with socket and screw joint including supply, fitting and fixing of required number of IS certified fitting, cutting threads to pipe and pipes to length including wastage providing necessary offsets and lay screw with extra socket and jam nut including fixing to wall and floors with supply of holder bats, clamps, fixing wooden plugs in walls complete as per direction of Engineer-in-charge. 237 Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having discharge 30m3 per hour and 70mtr head including installation of pump set withwire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell) 238 Supply, installation, testing and commisioning of automatic star delta control panel suitable for 10HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor) 239 Protection to the Borewell with CC base 240 3 core 6.0sqmm copper flat cable 241 Bore Cap 242 Clamp 243 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe (Sch-80)confirming to ASTM D1785 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 244 80mm Dia 245 65mm Dia 246 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 247 65mm Dia 248 80mm Dia 249 Providing & fixing of following dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 250 65mm Dia 251 80mm Dia 252 Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in-charge. 253 Sluice Valve Chamber (0.75x0.75x1.20mtr) 254 Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. 255 Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. 256 INTERNAL ELECTRIFICATION WORK 257 TRAININING ROOM AND SKILL DEVELOPMENT CENTER 258 Wiring 259 Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 260 Primery point 261 Secondary point 262 Call bell point 263 Wall bracket fan/Air circulator point specification same as above. 264 Exhaust fan point specification same as above. 265 Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board 266 Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) 267 Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 268 Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 269 Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 270 Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. 271 Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover. 272 Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. 273 Submains: 274 Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) 275 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. 276 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. 277 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. 278 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. 279 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. 280 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. 281 CONTROL PANELS : 282 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. 283 MAIN PANEL (TRAININING ROOM AND SKILL DEVELOPMENT CENTER). Incoming - (MCCB: 1 No 250A (36kA) 4P thermal magnetic(TM) release with ROM & spreader links. SPD: 1No 50kA 4P T1+T2. MCB C: 1 No 63A 10kA 4P.CHANGE OVER SWITCH: 1 no 250A 4P On Load Change OverSwitch.); Outgoing -(Busbar: 2 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 4 Nos 100A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for DB Training Room & Skill Development Center, DB Community Hall, OAT & Spare. MCCB: 5 No 63A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for Pump Room, STP DB, External Light Feeder Panel, Solar Input & Spare.); Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 284 DB TRAININING ROOM AND SKILL DEVELOPMENT CENTER (TRAININING ROOM AND SKILL DEVELOPMENT CENTER).Incoming- MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 100A 4P On Load Change OverSwitch); Outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]. Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 285 Distribution Board COMMUNITY HALL:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 286 Distribution Board OAT:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); Outgoing -[ Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 2 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 2 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 2 Nos 40A 10kA 2P for SPN BDB/ SPARE. MCB C 8 Nos 32A 10kA 2P for Power Cercuit/SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 287 Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. 288 4way TPN BDB for Light: Incoming - (1 no of 25A 30mA 4P RCCB); Outgoing-(12 nos of 6-16A SP MCB C) 289 4way TPN BDB for Raw Power: incoming - (1 no of 63A 4P MCI); Outgoing - (12 nos of 10-32A SP MCB) 290 12 way SPN BDB: incoming- (1 no of MCB C 32A (10kA) 2P); Outgoing- (10 nos of 6-10A SP MCB C. Cable Laying) 291 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 292 4 core x 240 sqmm A2XFY 293 4 core x 25 sqmm A2XFY 294 Cable termination: 295 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. 296 4 core x 240 sqmm A2XFY 297 4 core x 25 sqmm A2XFY 298 Earthing 299 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. 300 Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 301 Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. 302 Fittings & Fixtures 303 Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with allaccessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. 304 22 watt LED extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN021C LED22S complete. 305 12 watt LED extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN 021 LED12S 6500 complete. 306 Inverter type 9 watt LED Bulb on existing holder of approved make 307 12 watt LED, Brightest metal surface light with 100lm/W light output, Full low diffusor allows for wider light spread of 270 degrees, Aluminum die cast housing for better heat dissipation, Longer life of 30,000 hours^, Super slim design with a height of just 38mm allowing the product toblend seamlessly with the ceiling, Surge protection of 3kV with wide voltage protection of 160-360V similar to make Philips model name Metal FullGlow complete. 308 65-70 watt Highbay LED efficacy of 150Lm/W with its robust housing design and cater to diverse applications with multiple options of beam angles and suitable for surface mounting (with accessories) similar to make ‘Philips’ Cat no. BY515P LED100S 5700 complete. 309 36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B P LED 36S complete. 310 5 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 311 7 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 312 10 watt LEDTrack light, Long-lasting fixture, Robust metal construction, Functional, minimal design, Perfect fit for any home/outlet, Wide voltage protection from 160V–360V and surge protection up to 2KV, Premium white aluminium housing,No harmful UV radiation similar to make Philips Stanchion Track Light model no.31445 complete. 313 Track fo installation of track light similar to make Philips Stanchion Track model no 31442 complete. 314 48-50 watt LED Suspended 50mm aluminium extruded linear lighting luminaires with superior white powder coated finish (with accessories) similar to make ‘Philips’ Cat no. SP780P LED52S-6500 complete. 315 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete. 316 Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete. 317 Supply, delivery, installation, testing & commissioning of wall mounted air circulator 750mm sweep (Crompton make model nameAC750WALL / Havells/ Bajaj) 318 Supply, delivery, installation, testing & commissioning of single phase 600mm sweep 900 RPM heavy duty Exhaust fan(Crompton make cat no EXHD600-6-1/ Havells/ Bajaj) 319 Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’cat no Trans Air 12 complete. 320 Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Neo 6 complete. 321 Supplying and fixing Call bell Buzzer suitable for single phase, 230 volts, 1 Module of similar to make Legrand Myrius Cat no. 6792 50 complete. 322 Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I.box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing. 323 Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required. (more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.) 324 Testing, commissioning and charging of entire wiring system for TRAININING ROOM AND SKILL DEVELOPMENT CENTER. 325 Testing, commissioning and charging of entire wiring system for COMMUNITY HALL. 326 Testing, commissioning and charging of entire wiring system for OAT GREEN ROOM. 327 EXTERNAL ELECTRIFICATION (100kVA SUB-STATION) WORK 328 CABLING WORK 329 Supply of following size of PVC Armoured cables ISI marked. 330 4 core x 150 sqmm A2XFY 331 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 332 4 core x 150 sqmm A2XFY 333 Cable Trench & Hume Pipe 334 Construction of cable trench of size [1000mm(W) x 1000mm(D)] complete , base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing 335 Construction of cable trench of size [600mm(W) x 1000mm(D)] complete, base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing. 336 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 337 150mm dia RCC Hume pipe 338 250mm dia RCC Hume pipe 339 TRANSFORMER INSTALLATION WORK 340 Supply & fixing CT meter sheet steel enclosures made out of 16 gauge CRCA sheet ,double door with lock, neopraene gasket all around, two numbers earth lugs including painting ,padlock arrangement. Class 0.5 with O/P burden of 30VA 341 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 342 Supply installation and commissioning of 200Amp 11kv on load isolated air brake switch with braking capacity of 10kA complete with following accessories. Knife blade switches both Male/Female. Operating GI pipe with handle & rotating mechanism. Pad locking arrangement with pad lock. Scope also includes interconnecting AB switch OH line with 30sqmm AAC conductor & interconnection to pin insulator/HG fuse set by suitable Cu flexible strip .Spring earth of the handle ,earthing of switch etc. 343 Supply installation and commissioning of 11kV home gap fuse set on the double pole structure. The 11KV HG fuse set to be complete with 11KV insulators Cu horn gaps etc. The scope also includes interconnecting the HG fuse with transformer with 0 SWG HDB Cu conductor. (11KV, 200Amp, 3Pole) 344 Supply installation and commissioning of 11KV lighting arrester including interconnection by 30sqmm AAC conductor & clamp(12KV, 5KA) 345 Supply and fixing of substation bracket inj complete set. With 100x50x6 mm for MS channel, 75x40x6mm MS channel for AB switch and HG fuse, 50x50x5mm MS angle for Transformer (140Kg) including painting. 346 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 347 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 348 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 349 Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCCcover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 350 Supply of materials and installation of chemical earthing size of chemical earth bar 3 mtr, size of earth pit 3 X 2 X 9 chemical compound to be used 50 kg. There is an arrangements forterminationofcopper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 351 Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. 352 Supplying and laying 25 mm x 5mm G.I. strip on surface or in recess for connection etc as required. 353 Supply & fixing ofGInuts, bolts & washer of assoarted size for above work. 354 Supply installation and commissioning of 100 KVA, 11/0.4KV (AL) Transformer with tap changer, BIS Energy level-II with necessary hardware including unloading from truck, leading to the pole/plinth location and EMR test etc as required. 355 Supply & providing of 11K GI pin & pin insulators 356 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 357 Supplying and painting with Aluminium Paint where ever required for transmission line. 358 Supplying and painting with Black paint where ever required for transmission line. 359 Supplying and painting with Redoxide paint where ever required for transmission line. 360 Supply installation and commissioning LT Distribution Panel Board for 100KVA Transformer with MCCB, Aluminium Busbar for two Bay with Kitkat Fuse. 361 Supply installation and commissioning LT Busing cover in the LT site of the transformer 362 Supply and construct with all material for Boundary wall for fencing and anti climbing with M.S. Gate 5-0 x 8-0.Sand & Gravel spreading over the entire area. 363 Supply and construct with all material for plinth of size 5-0x5-0x6-0. 364 11 KV Single Circuit line 365 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 4 nos 366 Supply & fixing of(100 x 50 x 6)mm M.S Channel 367 Supply & fixing of11 KV V cross arm. 368 Supply & fixing of 11 KV top chanel.. 369 Supply & fixing of back clamp for cross arm 370 Supply & providing of 11K GI pin & pin insulators 371 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 372 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 373 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 374 Supply & installation of coil earthing 375 Supply & fixing ofassoarted nuts, bolts & washer for above work. 376 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 377 Supply & stringing with 80mm² insulated AAA Conductor. 378 Supplying and painting with Aluminium Paint where ever required for transmission line. 379 Supplying and painting with Black paint where ever required for transmission line. 380 Supplying and painting with Redoxide paint where ever required for transmission line. 381 Garding 382 Supply & fixing of(75 x 40 x 6)mm M.S Channel 383 Supply & fixing of No 8 G.I wire 384 Supply & fixing ofeye hook 385 SAFETY EQUIPMENTS & OTHER: 386 Supply and hanging of Shock Treatment Chart duly Laminated. 387 Supply & Laying of 8 mm Thick Rubber Mat (1mtr x 2mtr), ISI mark of 1100 V Grade. 388 Supply and Installation of 4 Nos. Fire Buckets on a Mild Steel Stand complete as per specification and requirement of Fire Safety Provisions. 389 Supply and Installation of 4.5 Kgs. Capacity CO2 type Fire Extinguisher complete as required. 390 Providing and fixing bi-lingual Danger HT notice board of 250mmx200mm as specified below,made of mil;d steel at least 2mm thick & vitreous enamelled signal red color on both sides as background & with insprictions in enamelled vitreous white color on front side for lettering as required. 391 Supply of First Aid box with all required accessories. 392 EXTERNAL ILUMINATION 393 Feeder Panel with timer 394 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. Incoming: 1 no 63A 4P MCCB (16 KA) type followed by 1 No 63-A 4 NO power contactor with Bypass Toggle switch & timer. Bus bars: 4 Nos.20x3mm E C Strips. Outgoing: 4 Nos 40/63-A, 4P MCB C (10kA). 4 nos 40/63 Amp 2P MCB C (10 KA).Complete duly factory wired as per SLD. Cable & wires 395 Junction Box 396 Supply, installation and testing ofCable Junction Boxes IP 66/67 “weather proof”, for outdoor installation with terminals, made of high quality Thermoplastic for cable size 10-16sqmm and box size 155mm x 210mm x 92mm (Hensel make or equivalent) 397 CABLES & ACCESSORIES 398 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 399 3c x 2.5 Sq. mm flexible Copper cable for connection of lamp from JB 400 2c x 6 Sq. mm Aluminum armoured cable. 401 4c x 10 Sq. mm Aluminum armoured cable. 402 4c x 16 Sq. mm Aluminum armoured cable. 403 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 404 Supplying and fixing of following dia ISI marked HDPE pipe with material grade PE-80 in ground/recess including excavation the earthl and making good the same in case of recessed conduit as required. 405 40mm OD PN-8, 3 mm thick 406 90mm OD PN-4, 3.5 mm thick 407 110mm OD PN-4, 4.3 mm thick 408 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 409 150mm dia RCC Hume pipe 410 Fittings & Fixtures 411 Supply of 7meter long aesthetically designed QUADRA MAST light pole. Pole shall made up of Hot Dip Galvanized Body andcoated with zinc rich primer & pure polyester powder coatingand finished with jet black colour and 3 coat Marine grade. The pole shall be suitable for fitting of 4nos of 100W rectangular design street light made up ofExtruded aluminium body and Clear toughend glass diffuser. Dimension of light must be 607 x 200 x 230mm. Body size of the pole will □150mm from bottom and 100mm size from middle to top. The Pole shall have base Plate□300 x 16mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge.(Make: K -lite Pole KP-2042-700 + KL-4461 Luminaries/ equivalent ). 412 Supply of 3 meter long aesthetically designed decorative lighting pole with 400mm height Cast Aluminium base, cast aluminium ring on the middle portion. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Bottom dia of the pole will be Ø139.7mm, Middle portion dia will be Ø76.1 mm and having base Plate of size □200 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Florian Pole KP- 4329/ equivalent). 413 Supply of 50W LED Post Top Light made up of Die Cast Aluminium base with spun aluminium top cover Body with clear Acrylic diffuser and having Dimension : Ø400 x 807 protected with IP 65, Surge Protection : 6KV, THD : <10% (Make: K -lite Imperial KL- 5444/ equivalent). 414 Supply, delivery, installation and testing of 4000mm long 100mm dia quadra extruded aluminium alloy pole with LED 45 watt post top light and foundation bolt and all fixing acessories with required size of rcc foundation as per direction of Engineer-in-charge. (K-Lite Pole cat noKP-5052, K-Lite Fitting cat no KL-5436 or equivalent),Pole made of extruded aluminium alloy (grade 6063) can achieve high strength and corrosion resistance in various atmospheric conditions, Pole design parameters vary depending on the type of bracket and loading factor, All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes, The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement.Built-in control box with service Can be Integrated with LED Modules. door including lock and safety chain (except 200 x 50).Earth connection. Safety class I, CE-Conformity mark,BIS - Conformity mark. 415 Supply, delivery, installation and testing of 8w LED Bollard 100mm dia 1000mm long for uniform illumination for pathways with required size of cc foundation as per direction of Engineer-in-charge. (K-Lite cat no KL-4823/ Ligman/ Simes/ Unilamp/ equivalent). Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Reflector system made of die-cast / spun aluminium. Non yellowing UV stabilized polycarbonate clear / translucent diffuser, Silicone gasket.Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cable entries for through-wiring of mains supply cable. Protection class IP54 / IP65. Integral power supply. Earth connection. Safety class I. CE-Conformity mark. BIS - Conformity mark. Suitable for operation on 240V, 50Hz single phase ac supply.
Contract Date: Jan 23, 2026 Contract Value : ₹ 6.76 Crore
Government Departments No of Bidders 11
Odisha View Result →
TenderDetail
Loading tenders