View Bid Results For Audio Transducers Tenders

We found 77 Bid Results related to audio transducers tenders. You can find Contractor details who won audio transducers tenders along with contract details in Bid awards announcements section.

Indian Tenders
1
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
57
11
9
Tender Publishing Platform
14
63
State / UT
18
23
9
8
8
7
4
4
2
2
2
1
1
1
1
1
1
1
1
Contract Value
29
10
23
15
Publish Date
0
0
0
0
0
Sector
16
25
10
10
9
6
5
2
2
1
1
1
1
1
1
1
1
Ownership
4
39
15
13
10
Within keyword
Active filters:
Showing 1–2 of 77 tenders matching your filters
1.
Rural Development #11467103 AOC
Supply And Installation Of Sound System For Cultural Programme At Mjn Stadium On Hire Basis Along With Its All Accessories Including Necessary Connection W.E.F. 05/11/25 To Entire Mela Period.- 1 Supply and installation, oh hire basis Tri-Amplified hangingsystem (OEM)Frequency Range (-10 dB) 48 Hz - 18 kHz, FrequencyResponse (‡3 dB). 60 Hz - 16 kHz. Horizontal CoverageAngle (-6 dB). 90 deg. nominal (250 HzVertical Coverage Angle (-616 kHz) dB): Varies with array size and configuration, System Input Power Rating: LF: 2000 W Continuous, 8000 W Peak (AES / 2 hour)MF: 600 W Continuous, 2400 W Peak (AES / 2 hour), HF:150 W Continuous, 600 W Peak (AES / 2 hour), MaximumPeak Output1136 dB to 146 dB, 1m (frequency/bandpass dependent), Recommended Amplification: LF: 2 x 1000-2000W into 8 ohms (2x LF transducers powered independently)MF: 600 - 1200 W into 8 ohms, HF: 300 - 600 W into 16 ohms f 2 S/Installationon hire basis PA array Speaker system withtrus mounting (Made in Italy) high performance dual drivePower Rating 1000W RMSConfiguration Two Way FrequencY Response 55-20.000Hz 3 18 active Dual drive Powered System subwoofer Maximum SPL (1m) 141 dB, Frequency Range (-10dB) 29 Hz150 Hz, Frequency Response (-3 dB) 35 Hz - 120 HzBuilt in Hiq Amp with DSP facility, Power Rating 2000 WPeak. Input Impedance: 40k balanced 4 S/I Powred amplifer with DSP facility Channels Sensitivity 1.4VRated Power Output (per channel) 3000W20, 2100W 40, 1200W 80Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)103 dB (A-weighted)THD < 0.5%Frequency Response (at 1W, 20 Hz - 20 kHz) 0 dB, -1 dB Crosstalk (below rated| power) 20 Hz to kHz >70 dB 5 Two way slage Monitor with DSP preset pecifications Frequency Range (- 10 dB): 60 Hz - 20 kHzFrequency Response (‡3 dB): 70 Hz - 20 kHz, CoveragePattern: 50° x 90° nominal, Crossover Modes: Passive / Bi-5 amp Crossover Frequency: 1.1 kHz, Power Rating: Passive Full- Range 800w 6 S/I of Digital console presonus studio live 32channel / 7 S/Installation on hire basis Soundcraft Vi series digitalConsole 8 S/Installation on hire basis speaker management 9 S/Installation on hire basis Graphic eqlizer 10 S/Installation on hire basis Anti feedback destroyer 11 S/Installation on hire basis High power two way LoudspeakerSystemType dual 15, two way, bass rofox Froquancy Range (-10 dB) 37 Hz - 20 KHz coverege pattern : 75° x50° nominal. UF Duver 2 c all270511 Differential Drive woofer. Il Drivatvolu 7452114(vOico coll) compression driver sensitivity 99 dB SPL ( Passive mode) RatedMaximum 3PL @ 1 m.(3.3 ft.) Nominal Impedance 4 ohms Power Rating 1200 W/ 2400 W / 4800 W 12 S/installation on hire basis Froquency Range (-10 dD) 34 Iz20 kHz Frequency Rosponse (+3 dB) 42 Hz - 19 kHzCoverage Pattern 90° x 50° nominal Crossover Modes: Bi- amppassive, extemally switchable Crossover Frequency1.3 KHzPower Rating Passive. 1600 W / 3200 W/6400 W (Continuous 1 Program / Peak): Bi-amp LF: 1600 W / 3200 W/ 6400 W Bi-amp HF: 75 W/150 W/300 W Maximum SPL2 136 dB SPL peak. 13 S/I Sennhiser 5000 series in ear monitor 14 S/I Audio technica in Ear monitor 15 S/I Shure SM 58 microphone 16 S/I Shure SM 57 microphone 17 S/I of Servo stabilizer 18 Arrangement of complete sound system of hom with driverunit, paging paging system, amplifire, microphone etc as reqd. 19 Arrangement of complete 63 KVA DG set with fuel, mobil, operator including necessary connection on hire basis’
Contract Date: Jul 01, 2026 Contract Value : ₹ 5.82 Lakh
Local Bodies No of Bidders 3
West Bengal View Result →
2.
Educational and Research Institute #11294681 Technical Bid
Tender for Purchase Of Trainer Kits And Function Generator , Trainer Kits And Function Generator , Function Generator Frequency Range : 0.11 Hz To 3.33 Mhz Waveforms: Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Duty Cycle Control And Variable Dc Offset Control -20Db * 2 And Variable Attenuator. Waveform Types Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Ttl Output Range 4Vpp - 20Vpp 4.8Vpp Sine Wave Distortion 0.11 Hz-100: Max 0.5 % 0.1 Mhz - 0.3 Mhz Max 1.5% 0.3 Mhz - 3Mhz Max 3% Square Wave Rise /Fall Time Overshoot Duty Cycle ≤ 60Ns ≤ 7.5% 50% Pulse Wave Pulsewidth Range Rise /Fall Time 15 % To 85 % ≤ 60Ns Ttl Output Level Amplitude Fan-Out Rise /Fall Time ≥4.8Vpp 10Ttl Load ≤ 60Ns The Display Shows Function And Frequency On The 16*2 Lcd Display Amplitude We Get From 1.5 V Pp To 20 V Pp And Varies As Per The Different Frequency Range Amplitude Distortion Without Load Wave 1 Mhz 2Mhz Sin 20 Vpp 18 Vpp Square 20 Vpp 20 Vpp Triangle 20 Vpp 16 Vpp Pulses 20 Vpp 18 Vpp Ttl 5 Vpp 5 Vpp Dc Varies From 0 ± 5V Dc Function Generator Frequency Range : 0.11 Hz To 3.33 Mhz Waveforms: Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Duty Cycle Control And Variable Dc Offset Control -20Db * 2 And Variable Attenuator. Waveform Types Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Ttl Output Range 4Vpp - 20Vpp 4.8Vpp Sine Wave Distortion 0.11 Hz-100: Max 0.5 % 0.1 Mhz - 0.3 Mhz Max 1.5% 0.3 Mhz - 3Mhz Max 3% Square Wave Rise /Fall Time Overshoot Duty Cycle ≤ 60Ns ≤ 7.5% 50% Pulse Wave Pulsewidth Range Rise /Fall Time 15 % To 85 % ≤ 60Ns Ttl Output Level Amplitude Fan-Out Rise /Fall Time ≥4.8Vpp 10Ttl Load ≤ 60Ns The Display Shows Function And Frequency On The 16*2 Lcd Display Amplitude We Get From 1.5 V Pp To 20 V Pp And Varies As Per The Different Frequency Range Amplitude Distortion Without Load Wave 1 Mhz 2Mhz Sin 20 Vpp 18 Vpp Square 20 Vpp 20 Vpp Triangle 20 Vpp 16 Vpp Pulses 20 Vpp 18 Vpp Ttl 5 Vpp 5 Vpp Dc Varies From 0 ± 5V Dc 1. Equipped With 16 High-Visibility Leds For Monitoring Experimental Outputs And Logic Status Indication. 2. Dedicated Driver Circuitry Provided For Reliable Operation And Protection Of All 16 Leds During Experimentation. 3. All 16 Driver Input Lines Are Terminated Through Banana Connectors For Flexible And Easy External Interfacing. 4. Includes 16 Spdt Toggle Switches For Generating Manual Logic Input Conditions In Digital Electronics Experiments. 5. Additional 16 Leds Provided To Display The Real-Time Status Of Individual Switch Operations. 6. One Terminal Of Each Spdt Switch Is Externally Accessible Through Banana Sockets For Convenient Circuit Connections. 7. Built-In Variable Clock Generator Enables Pulse Generation For Sequential And Timing-Based 8. Digital Experiments. 9. Frequency Adjustment Provided Through Potentiometer And Rotary Switch Combination For Precise Clock Selection. 10. Clock Output Is Terminated Through Banana Connectors For Quick Integration With External Circuits And Trainer Modules. 11. Features Dual 7-Segment Led Display With 7447 Decoder/Driver Ic For Bcd To Display 12. Conversion Experiments. 13. Inputs Of The 7447 Drivers Are Terminated At Banana Connectors For Direct Digital Logic Interfacing. 14. Includes Solderless Breadboard For Rapid Circuit Prototyping And Reusable Experimental Setup Development. , Strain Gauge Study Trainer This Trainer Shall Consists Of Cantilever Jig And Strain Gauge Bonded On The Cantilever, A Signal Conditioner For The Strain Gauge, Instrumentation Power Supply, 3½ Digit Digital Indicator Display The Strain. * Cantilever Beam Of Maximum Weight Upto 1Kg. * A Pan With Slotted Weights To Vary The Strain. * Built In Instrumentation Power Supply * Signal Conditioning Card For The Strain Gauge * 3½ Digit Digital Display For Displaying The Strain * Offset And Gain Variable Provision * Logical Diagram With Panel. * Mounted In Sleek Cabinet. 1) On Board Carrier And Modulating Signal Generator With Amplitude And Frequency Adjustable 2) Carrier And Modulating Signals Are Provided In The Unit With Frequency Variable. 3) In-Built Regulated Power Supply 4) On Board Envelope Detector 5) Schematic Diagram Provided In The Front Panel Modulating Signal Frequency : (300Hz-3 Khz) Amplitude : (0-5) V Carrier Signal Carrier Signal Frequency : 10 Khz - 50 Khz Amplitude : (0-15) V Type Of Modulator : 1. Ring Modulator 2. Transistor Based Modulator Method Of Modulation : 1. Under Modulation 2. Critical Modulation 3. Over Modulation , Load Cell Study Trainer This Module Shall Consists Of A 5Kg Load Cell Sensor, Weights, Signal Conditioner And 3½ Digit Digital Indicators To Display The Load. * Strain Gauge Based Load Cell Sensor Of 5Kg Capacity * A Pan Provision For Placing The Standard Weights Signal Conditioner For Load Cell (Output 0-5V) * Built In Instrumentation Power Supply * Zero Calibration Provision. * 3½ Digit Digital Indicator To Display The Applied Load. * Mounted In A Elegant Powder Coated Cabinet With Mimic Diagram 1) On Board Sine Wave Generator 2) Provision To Study Modulation & Demodulation In The Same Unit 3) Test Points To Study Different Waveforms 4) In-Built Audio Power Amplifier 5) Mic Pre Amplifier 6) Built-In Power Supply 7) Sine Wave Generator : Frequency - 100Hz To 1.2 Khz With Amplitude Adjustable, (0-5V) 8) Fm Modulator : Direct Fm 9) Carrier Frequency : 20 Khz (Low), 367 Khz(High) 10) Fm Demodulator : Pll Detector, Quadrature Detector, Foster Seelay Discriminator / Phase Discriminator, Ratio Detector Are Provided. 11) Audio Power Amplifier : Gain 100 12) Mic Pre Amplifier : Gain 20 , Lvdt Study Trainer It Shall Consists Of A Lvdt Sensor, Signal Conditioner And A Digital Indicator To Display The Displacement Cantilever Jig With Micrometer. * Lvdt Sensor With Micrometer (Range: 0-25Mm) * Signal Conditioner For Lvdt * Displacement Calibrated Range From (-10Mm To + 10Mm) * Output Voltage (-5V To +5V) * Built In Instrumentation Power Supply * A 3½ Digit Digital Indicator To Display The Displacement * Mounted In A Elegant Powder Coated Cabinet. * Logical Diagram In The Panel Detailed Documentation , Thermistor Study Trainer  One Negative Temperature Co- Efficient Type Thermistor Sensor Is Used As A Temperature Sensor.  Signal Conditioner For Thermistor Transducer: Output 5-0V  Built In Instrumentation Power Supply  A 3½ Digit Digital Indicator Is Used For Voltage Display  Zero Calibration Provision  Water Bath Is Used As A Heat Source.  Thermometer Is Provided To Monitor The Actual Temperature.  Mounted In An Elegant Cabinet , Thermo Couple Study Trainer * One J Type Thermocouple Is Used As A Temperature Sensor * One Ad590 Sensor Is Used For Cold Junction Compensation * Signal Conditioner For J Type Thermocouple Output: (0-5V) * Built In Instrumentation Power Supply * 3½ Digit Digital Indicator To Display The Temperature. * Water Bath Is Used As A Heat Source * Zero Calibration Provision * Thermometer Provided To Monitor The Temperature * Mounted In A Elegant Powder Coated Cabinet * Logical Diagram In The Panel Detailed Documentation , Rtd Study Trainer * Pt100 Type Rtd Is Used As A Temperature Sensor * 3 Wire Configurations Is Provided Signal Conditioner For Rtd Output Is (0-5V) * Built-In Instrumentation Power Supply * A 3½ Digit Digital Indicator To Display The Temperature * Water Bath Is Used As A Heat Source. * Thermometer Provided To Monitor The Actual Temperature * Mounted In A Closed Cabinet. Detailed Documentation. , Piezo Electric Transducer Study Trainer This Trainer System Shall Consists Of Vibration / Acceleration Sensor Of Piezo Electric Type, Signal Conditioner, Regulated Power Supply, 3½ Digit Digital Indicator Etc Provided To Study The Characteristics Of Piezo Electric Sensor * Vibration Sensor Of Piezo Electric Type Mounted In The Base Plate To Sense The Vibration Of The Material. * Precision Rectifier Circuit For Above Sensor. * Signal Conditioner Of (0-10)Vdc * Ic Regulated Power Supply * 3½ Digit Digital Indicator To Display The Voltage. * Logical Diagram In The Panel * Mounted In A Powder Coated Closed Cabinet. Vibrator Exciter  One Mechanical Setup Provided  One Vibration Motor To Vibrate The Mechanical Setup # I/P : 230V Ac/50 Hz # Power : Max: 0.5 Hp One Auto Transformer Is To Vary The Input Voltage For Mechanical Setup , Schrings Bridge * 4 Arms With Suitable Connectors. * Provision To Connect The Unknown Capacitance At One Arm * Two Potentiometers Provided At Two Arms To Obtain The Bridge Balance Condition. * Input Of The Bridge Is Taken From A 1Khz Fixed Amplitude Oscillator. * One Audio Amplifier With Miniature Speaker Is Provided To Detect The Bridge Balance Condition Acoustically. * Measuring Range : 0.001Uf - 2.0Uf * Sensitivity : +0.1Uf * Tolerance : +5% * All Are Housed In A Metal Cabinet * Detailed Documentation * Required Patch Chords Are Provided Decade Capacitance Box Dial 1 :0-0.01Mfd In Steps Of 0.001Mfd Dial 2 :0-0.1Mfd In Steps Of 0.01Mfd Dial 3 :0-1Mfd In Steps Of 0.1Mfd Dial 4 :10Mfd In Steps Of 1Mfd Total Range : 0-11.11Mfd , Maxwells Inductance Bridge * Four Arms Are Provided With Suitable Connectors * One Arm With Provisions To Detect The Nearest Range Of Unknown Inductance. * Two Arms With Variable Potentiometers Given To Balance The Bridge In Null Condition * One 1 Khz Oscillator Of Fixed Amplitude To Feed The Input To The Bridge. * One Audio Amplifier With Speaker To Detect The Bridge Balancing Conditions. * Measurement Range: 15Mh - 200Mh * Tolerance : +5% * Built-In Power Supply * Connector Facility Given To View The Output Of The Bridge Externally By Cro * All Are Housed In A Powder-Coated Cabinet With Logical Diagram. * Required Patch Chords Are Provided Decade Inductance Box Dial 1 :0-9Mh In Steps Of 1Mh Dial 2 :0-90Mh In Steps Of 10Mh Dial 3 :0-900Mh In Steps Of 100Mh Total Range :0-999Mh , Voltmeter Desk Top Analog Voltmeter (0-1V Dc, 0-10V Dc, 0-30V Dc, 0-5V Dc) Each 5 Nos , Ammeter Desk Top Analog Ammeter (0-10Ma Dc, 0- 50Ma Dc, 0-100Ma Dc, 0-500Microa Dc) Each 5 Nos , Digital Trainer Kit * 16 LedS Are Provided To Indicate The Status/Outputs Of An Experiment. * Drivers Provided To Drive The 16 LedS * All The 16 Inputs Of The Driver Are Terminated At Banana Termination For Easy Wiring Of Any Experimental Setup. Input Switches : * 16 Spdt Switches As Logical Inputs Are Provided. * 16 LedS Provided To Display The Status Of The Switches. One End Of Each Spdt Switch Is Terminated At A Banana Termination For Easy Wiring. , Ic Tester It Is The Latest Microcontroller Based Universal Ic Tester. It Functionally Tests A Wide Variety Of Analog/Linear Ics Including Adc,Dac,Dpm Ics, Op Amps, Transistor Arrays, Waveform Generators And Digital Ics Including Microprocessors, Microcontrollers, Eproms, Rams, Peripheral Devices Apart From 74 Series Of Ttl Ics And 40/45 Series Of Cmos Ics
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
3.
Educational and Research Institute #11161433 Price Bid
Procurement Of Equipment, Instruments, Machinery, Tools Etc. Related To Laboratories And Workshops Of Electronics And Telecommunication Engg., Engineering Physics, Engineering Mechanics Of Mirik Government Polytechnic, Mirik, Dist. Darjeeling, 734214 , Spherometer (Screw Pitch 0.05 Mm And Lc 0.005 Mm) , Concave Mirror (Focal Length 20 Cm) , Convex Mirror (Focal Length 20 Cm) , Concave Surface (Focal Length 20 Cm Diameter 50 Mm) , Hooks Law Apparatus (Consisting Of 30 Cm Long Mirror Scale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand) , Mercury (Distilled Liquid Mercury, Grade Std.-Biotech Grade) , Flywheel Apparatus (Thickness: 4.4 Cm Diameter :20 Cm) , Cantilever (Length 100 Cm, Hook At One End, C Clamp) , Light Weight Hanger (Metal Slotted Weight Mechanics Physics Experiment Equipment Set With Hook With Weight Of Each Mass Of The Order Of 50Gm Or 100 Gm) , Inverse Square Law Apparatus (Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter) , Stopwatch (Digital Stopwatch With Ms Count) , High Resistance Box (Resistance Box Plug With 1 To 10 K Ohm Resistance) , Winch Crab Single Purchase With Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut.String, Weight Box With Pan. ] , Winch Crab Double Purchase Without Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut. ] , Worm And Worm Wheel Single Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Worm And Worm Wheel Double Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Wheel & Axle Simple Without Weight [Standard Setup For Lab.] , Simple Screw Jack With Weight [Experiment Set Up Screw Jack ( Weights)All Metallic Construction Accurately Machine Cut Screw With A Pitch Of 5 Mm Carrying A Double Fanged Turn Table Of About 20 Cm Diameter. Fitted On A Heavy Cast Iron Base And Complete With Two Adjustable Pulleys, Cord And Hook. Weights Are Included.] , Combined Inclined Plane & Friction Slide Apparatus Iron Base & With Weight [Standard Setup For Lab.] , Parallel Forces Apparatus [Experiment Set Up Simple Supported Best Type Supported At Its End. For Verification Of Condition Of Equilibrium Of Parallel Forces, Law Of Lever & Forces On Beam Etc. Consisting Of Two Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Beam With Steel Back Plate. Complete With Two Strups, Hooks & Two 10Kg Weights. ] , To Verify Lami’S Theorem [Gravesand Apparatusboard: Wooden With Metal Base Pulley: Z-Pullies (2 Nos) With Adjustable Distance Weight Set: 5X50 G (3 Sets). ] , Simple Jib Crane Apparatus Iron Stand With Weight [Experiment Set Upwith Consisting Of A Tubular Compression Balance, Pivoted About An Axis Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Completion Wooden Base With 1.2 Meter Jib. With Weights. ] , Mini Drafter, T Square, Protractor, Set Squares, Compass, Divider [Made Out Of Wood. To Be Used In Chalk Board] , Model Of Geometric Constriction (Solid Cube, Solid Primed, Cylinder, Cone, Hexagon, Tetrahedron ) [Made Out Of Wood. To Be Used In Chalk Board] , Amplitude Modulation And Demodulation Trainer Kit [Message Signal:100 Hz To 2.8 Khz, Carrier Signal 28 Khz To 108 Khz,Modulation : Balanced Modulator, Amplifier : Op Amp Based, Demodulation : Diode Detector & Lpf(6Th Order)] , Frequency Modulation Anddemodulation Kit [On-Board Message Signal With Variable Amp/Freq,On Board Carrier Signal Fm Modulation Using Xr 2206Ic,Demodulation Using Pll Detector And Lpf 4Th Order Lpf,Internal Power Supply +5V , +12V/ 500 Ma] , Super Heterodyne Am Radio Receiver Trainer Kit To Measure Sensitivity, Selectivity And Fidelity [On Board Variable Capacitor Tuning,Receiving Antenna,Local Oscillator,Bfo, Rf Amplifier, Mixer,If Amplifiers, Detectors, Agc,Audio O/P Amplifier, Speaker.Frequency Range: 400Khz To 1700Khz,If Frequency: 455 Khz.] , Pam, Pwm And Ppm Modulation And Demodulation Trainer Kit [Provides Sine Waveform Output Of 250Hz, 500Hz, 1 Khz, And 2 Khz With Amplitude Adjustments Of 0 - 5Vp-P. Switch Selectable Sampling Clock Of 4, 8, 16, 32 Khz. On-Board Features Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output, 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz.] , Analog Signal Sampling & Reconstruction Trainer Kit [±15V D.C. At 100Ma, Ic Regulated Power Supply, A.F. Signal Generator For Modulating Signal.Sampling Clock Generator To Provide Sampling Clock And Gate Pulse. Modulator Circuit For Flat-Top Natural And S/H Circuit. Demodulator Circuit To Reconstruct Input (Sinewave)] , Telephone Receiver Trainer Kit [Line In Section : One Dot Line Connection Port.Handset : One Handset Connection Port. Keyboard : 4X3 Matrix Keyboard.Dialer : Tone And Pulse. Facilities : Redial Up To 32 Digits, Mute, Redial, Flash, Pause Switches.Indicators : Line In, Hook, Tone And Ringer, Call Mute Section.Control : Ringer Volume Control, Ringer Speed Control.Speech Path : Fully Non-Blocking.Dial Pulse Ratio : 10 Pps + / - 10%.] , 100Mhz Digital Oscilloscope [Bandwidth: 100 Mhz, 2 Analog Channels+ Ext With Probes Included Rise Time: =3.5 Ns, Real-Time Sample Rate Of 1 Gsa/S 1% Dc Gain Accuracy Should Support Rs232/Uart, I2c And Spi Bus Triggers And Decodes Usb And Ethernet Connectivity] , 30Mhz Analog Cro [Dual Trace Dual Channel Oscilloscope. Bandwidth: 20Mhz. Full Bandwidth Sweeping Circuit , Tv-H / Tv-V Synchronization And Trigger-Lock To Observe All Kinds Of Signals Stably. Y Deflection Operation: Y1, Y2, Alt, Chop, Add, Mode.Horizontal Sweep Mode: Auto, Trig, Lock, Single.X-Y Mode Input: X-Axis Yi And Y-Axis Y2.] , 2 Mhz Function Generator [Frequency: 1Hz – 2 Mhz Sine, Square, Triangle, Ttl Output] , Digital Storage Oscilloscope (100 Mhz) [Bandwidth 100 Mhz, Channels: 2+, Display: Tft Color Lcd Of Suitable Size (Capacitive Touchscreen). Sampling Rate: 1 Gsa/S Real Time, Sampling Mode: Normal, Average (2, 4, 8, 16, 32, 64, 128, 256), Peak Detect. Mathematics: A+B, A-B, A×B, Fft (Fast Fourier Transform). Fft Windows: Rectangle, Hanning, Hamming, Blackman. Auto Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1-2 (Rise), Delay1-2(Fall) ] , Trainer Kit For Rectifier With And Without Capacitor Filter For : — (A) Half-Wave Rectifier, (B) Full-Wave Rectifier, (C) Bridge Rectifier [Transformer Rating : 9-0-9V/200Ma, Rectifiers : Half Wave; Full Wave - Bridge, Center Tapped Rectifier,On-Board Dc Voltmeter : 0 - 20V,On-Board Ac Voltmeter : 0 - 20V,Load : Variable Resistive Load 10K,Filter Circuit : In-Built- Capacitor (3Nos.),In-Built- Inductor (1No.),Input Line Voltage : 230V Ac ± 10%, 50Hz] , Push-Pull Amplifier Trainer Kit [I.C Regulated Power Supply : +6 V.Digital Ac Voltmeter: 0 – 20 V.Digital Ac Milliammeter : 0 – 200 Ma.Set Of Resistances.Set Of Capacitors.Two Transistors Cl 100 And Ck 100.Connecting Wire.] , Fet Characteristics Trainer Kit [Variable Dc Regulated Power Supply Of 0-5V At 250Ma. Dual Range Dc Voltmeter Of 1.5V/15V.Dc Ammeter Of 0-20Ma.] , To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Bandwidth, Midband Gain, Input Impedance And Output Impedance For: (A) Single-Stage Amplifier (B) Double-Stage Amplifier [Sine Wave Oscillator 15Hz To 150Khz In Four Ranges With Amplifier & Amplitude Adjustable.Three Decade Resistances Bank In Steps Of 1K, 10K & 100K Per Steps Total Step 30.Two Pnp Transistors.] , Mosfet Characteristics Trainer Kit [On Board Ammeter And Voltmeter,Dual Variable Dc Power Supplies,On Board Mosfet And Fet With Resistors To Perform Experiments] , To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — (A) C-E Configuration, (B) C-C Configuration, (C) C-B Configuration [Power Supply 1) 0-1V Dc 2) 0-10V Dc.Meters Dc 65Mm Four Dial V, V , Ma Ua/ Ma.Transistor Cl100/ Similar] , Component Development System [Power Supplies On Boards 0-15 V And 0-30 V, 250 Ma Each Variable.Fixed Dc Regulated Power Supplies 15 V/250 Ma And 5 V/250 Ma.Ac Power Supply 15-0-15 V For Rectifier Applications.Various Components On The Trainer Set. ] , Kcl & Kvl Trainer Kit [Two Dc Ic Regulated Power Supplies 0-12 V/150 Ma, Two Mr65 Square/Digital Meters For Voltage & Current Measurement, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Power Cords 230 V, 50 Hz] , Thevenin’S And Norton’S Theorems Trainer Kit [Power Supply 2?3?0?V, Regulated & Short Circuit Proof Variable Dc Voltage Source – 01 No. Fixed Resistance Of Different Values. Dc Voltmeter.Dc Ammeter. Glass Fuse For Short Circuit Protection. On/Off Switch With Indication Light. Patch Cords Suitable To The Terminals With Board For Easy Interconnection.All Above Accessories Will Be Fitted On Bakelite Sheet Fixed On Box.] , Superposition Theorem Trainer Kit [Instrument Comprises Of Two Fixed Output Dc Regulated Power Suppliesof 12V & 5V At 500 Ma Current, Three Moving Coilmeter, Circuit Diagram Printed On The Front Panel & Connections Ofsupplies, Meter & Resistances Brought Out At 4Mm Sockets. ] , Maximum Power Transfer Theorem Trainer Kit [Ammeter 30Ma Dc. Voltmeter 12V Dc. Power Supplies: Dc Supply Ic Regulated 0-12V Dc, 150Ma. Operated On Mains Power 230V, 50Hz +10% Components Are Mounted On The Panels Are: Resistances 2Watts Variable Resistor Voltage Control Through Potentiometer. Fuse For Short Circuit Protection. Patch Cords 4Mm.] , Reciprocity Theorem Trainer Kit [Instrument Comprises Of One Fixed Output Dc Power Supply Of 12V At 300 Ma Current, Two Moving Coil Meters, Circuit Diagram Printed On The Fornt Panel & Connections Of Supplies, Meters & Resistances Brought On Terminals.] , Series And Parallel Resonant Circuit Trainer Kit [Analog Meters: Ammeter 20Ma Ac. Voltmeter 20V Ac. Components Mounted On The Panels Are: 3 Nos. Of Resistors Selected By Rotary Switch. 3 Nos. Of Capacitors Selected By Rotary Switch. 3 Nos. Of Inductors Selected By Rotary Switch.] , Low Pass And High Pass Filter( Rc & Lc) Constant K Type Trainer Kit [Instrument Comprises Low Pass Circuit Rc Type Instrument Comprises Low Pass Circuit Lc Type Instrument Comprises High Pass Circuit Rc Type Instrument Comprises High Pass Circuit Lc Type Instrument Fitted In Highly Shockproof Plastics Box] , T And ? Type Attenuator Trainer Kit [Instrument Comprises Ofdc Ic Regulated Power Supplies 0-15V/150Ma. Two Mr65 Square / Digital / Round Meters For Voltage & Current Measurement. T And Pie Network Provided On The Board. Variable Resistor Using Band Switch Is Mounted On The Board. Instrument Fitted In Highly Shockproof Plastics Box. Sufficient No Of 4Mm Patch Cords For Interconnection Instruction Manual For Student Workbook. Power Cords 230V, 50Hz] , To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: (A) Open Termination, (B) Short Termination, And © Matched Termination. [Transmission Line : Coaxial Cable 100M ( 25M X 4 Nos) Impedance Matching Resistance : 0 To 100 ( 02 Nos ) Test Generator : 1. Sine Wave : 4 Khz To 4 Mhz. 2. Square Wave : 10 Khz. Interconnections : 4 Mm Sockets On All Input / Output Connections. Test Points : 10 On Board Circuit Mimic : Illustrates Functional Blocks For Ease Of Experimentation Power Requirement : 230V 10% 50Hz, 1 Ac. Accessories Provided : I. Set Of Patch Cords. Ii. Bnc To Bnc Cable. Iii. Bnc To Crocodile. Iv. Detailed Instruction Manual.] , Digital Trainer Kit (Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor.) [Dc +5V , 400Ma; Dc +12V, 250Ma; Dc -12 V, 250Ma, Dc0 To + 30V: Variable 100Ma,Ac Output: 12V-Ct-12V, 150Ma; Logic Data 8-Bit Debounced Set/Clear Ttl Output With Bicolour Led; Clock Generator I Hz To 200Khz Variable & Manual, Ttl & /Ttl(Complement) With Bicolour Led;Logic Probes 8-Bit 3-State Led Display High, Low, High Impedance; Function Generator Sine, Square, Triangle, 1 Hz To 250 Khz;Bread Boards : 3 X 820 Tie-Points; Total Short Circuit Protection From Any To Any Point On Board] , Complete Setup To Implement The Truth Table Of Encoder,Decoder, Multiplexer And De-Multiplexer. [The Trainer Kit Should Be Able To Verify The Truth Tables Of Truth Table Ofencoder,Decoder, Multiplexer And De-Multiplexer.] , Complete Setup To Design/Construct Parity Generator, Checker And Comparator. [Industry Standard Specification To Perform Relevant Experiments. ] , Flip Flop Trainer Kit [Kit For Verification Of Jk, Sr, D, And T Flip-Flop Truth Tables] , Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design / Construct Programmable Up/Down Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design Controlled Shift Register And Study Their Function. [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Study Different Memory Ics [Industry Standard Specification To Perform Relevant Experiments. ] , A/D & D/A Converter Trainer [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Interface Ttl And Cmos Ics. [Industry Standard Specification To Perform Relevant Experiments. ] , 8051 Trainer Kit [Operating Frequency : 10Mhz Crystal,40-Pin Ic Base | 40Pin-Zif Socket,2×16 Char Lcd Display,32 I/O Pins,32Kb-Sram,32Kb-Eeprom.] , Ct-31/51 Or 8031/51 Microcontroller Trainer Kit With Led Display, Usb Interface & Inbuilt Power Supply [Operating At 10/12 Mhz, On Board 8K Ram,8/16K Bytes Of Eeprom,48 I/O Lines,Hexadecimal Keyboard And Six Seven Segment Displays,Rs-232C Interface,Usb Interface] , Ct-31/51Lcdadu8031/51 Microcontroller Trainer With Lcd Display, Usb Interface, Adc, Dac& Inbuilt Power Supply [Trainer Based On 8051/89C52 Microcontroller.On Board 32K Ram.64 K Bytes Of Eeprom.20 X 2 Lcd Display.48 I/O Lines. Onboard Adc & Dac.] , Adc Interface Module [Usb Interface, Adc Module Module 10 Channel 12Bit Ad Sampling Data Acquisition Stm32 Uart Communication Adc Module] , Dac Interface Module [Operating Voltage 2.7-5.5 V. Interface Type I2c. Resolution 12 Bits.] , Lcd Display Module [Display Contents :16 * 2 Characters (5*8 Dots ). Lcd Size :80 X 36 Mm .Lcd Thickness :9.5 Mm.] , Keyboard Interface Module [5X4 Keys Matrix Keyboard. ] , Dc Motor Controller Module [Driver Module : L298n. Motor Supply Voltage (Max.): 46V.Motor Supply Current (Max.): 2A. ] , Stepper Motor Controller Interface Module [Robocraze Stepper Motor(28Ybj-48 Dc 5V 4 Phase 5 Wire) + Uln2003 Driver Board Compatible With Arduino] , Trafic Light Controller Module [Led Traffic Lights Signal Module/Digital Signal Output Traffic Light Module] , Temperature Measurement Module [Electrobot Dht11 Digital Temperature & Humidity Sensor Module For Arduino And Rpi] , Operational Amplifier Trainer Kit ( Ic 741 ) [Inbuilt Variable/Fixed Dc Regulated Power Supplies.Output Voltages : 0-5Vdc (2Nos.) (Variable), +12Vdc (Fixed).Transistor & Components Provided Ic : 741.Transistor : Cl 100 (Npn).] , Active Filter Trainer Kit (Lpf, Hpf, Bpf) [Opamp Based First Order Lpf, Hpf, Bof Trainer Kit (Mi-A14)] , Application Of Ic555 Timer Trainer Kit (Astable & Monostable Mv) [In-Built Regulated Dc Power Supply.On Board Manual Pulse Generator For Triggering The Monostable And Bistable Circuit.Inbuilt Led Output Indicator.Symbols And Diagram Are Printed On Glass Epoxy Pcb.] , Opamp Based Oscillator Trainer Kit ((A) Hartley, (B) Colpitt, (C) Phase Shift, (D) Wein Bridge) [Op-Amp Oscillator Trainer Mi-A13. Frequency 50-60 Mhz.] , Crystal Oscillator Trainer Kit (741 Based) [Industry Standard Specification To Perform Relevant Experiments. ] , Function Generation Kit (Using Icl8038) [Icl8038 Function Signal Generator Sine Triangle Wave Kit Diy Professional K5e8.Uses Icl8038 And High-Speed Op Amp, Higher Accuracy. Low Distortion Sine Wave: 1%.] , Voltage Regulator Trainer Kit (Using Ic723) [0-35V D.C. At 250Ma, Countinously Variable Unregulated Power Supply.D.C. Milliammeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 50Ma And 250Ma.D.C. Voltmeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 10V And 40V.Ic 723 Fitted On Base.Three Potentiometers.] , Function Generator Trainer Kit [Frequency Ranges: 1? Hz To 1?0? Hz, 1?0? Hz To 1?0?0? Hz Fuse:3?5?0? Ma, Slow Blow Automation Grade: Manual Power Supply:Max 2?3?0?V Ac, 5?0? Hz +/- 1?0?%] , Maxwells Bridge Trainer Kit [The Kit Contains A Bridge With Provision For Connections Of Capacitors And An Unknown Inductor. In Built Ac Supply [ 1 Khz And 2 Vpp ] And Dc Supply [ +5 V ] On Board. Two Nos Dial Resistances [ 50 Ohm To 200 Ohm ] And [ 1 Ohm To 11 Ohm ] In Step. A Dc And Ac Null Detector Using Selector Switch. A Dial Type Variable Capacitor [ Range 0.2 Uf Ro 1.2 Uf ] And Six Nos. Unknown Inductors [ Range 1 Mh To 12 Mh ].] , Lvdt Trainer Kit [Excitation Source Built In Ac Source 2.5 Khz Sine Approx. L.V.D.T. In Non Metallic Structure. Micrometer One (For Displacement) Displacement Range 10Mm. Test Points Sockets At Different Places For Signals. Potentiometer Two For Zero & Calibration Adjust Display (Mm) 3.5 Digit Digital Power Supply Ic Regulated Phase Detection Balanced Demodulator Power Supply Short Circuit &Overload Protected Mains 230V/50Hz Ac] , Strain Gauge Trainer Kit [Strain Gauge: 4 Mounted Upon Cantilever 150X3.5X3.5Mm, Stable Dc Voltage For Strain Gauge Bridge, Opamp Based,Precision Instrumentation Amplifier With Variable Gain,Potentiometer For Zero And Calibration Adjust,3.5 Digit Display For Strain/Weight, 230V 50Hz Ac] , Temperature Transducers Kit Using (A) Rtd (Pt-100) (B) Thermistor. [12 - 0 - -12 V 500Ma To Drive Digital Integrated Circuitry. 5 - 0 - -5 V 250Ma To Drive A To D Converter Signal Conditioning And Amplifying :Analog To Digital Converter. Display : 31/2 Digit Led Display Of 200 Mv Fsd Initial Set : Single Turn Potentiometer To Set Initial Temperature ( Room Temperature) Final Set : Single Turn Potentiometer To Calibrate The Instrument ( Max. Temperature) Select : 2 Way Rotary Switch To Select Rtdand Thermistor. Power On : Rocker Switch To Control Power Supply To The Instrument.] , Calibration Of A Single-Phase Energy Meter By Phantom Loading Trainer Kit [Usage/Application: Lab Experiment Connection:4?-Mm Patch Cord Single Phase Automation Grade:Manual Power:2?0?0? W Voltage:2?2?0?-2?4?0? V] , Calibration Of A Voltmeter Using Crompton Potentiometer Trainer Kit [This Trainer Is Supplied Along With Highly Regulated Dc Power Supplies To Operate The Unit. Further To Calibrate Pmmc Meters, Necessary Ratio Boxes Also Provided. Resistors Used In This Unit For Coarse And Fine Are Very Standard Type Made Of Manganin. This Enable The User To Measure The Potential In A Circuit Close To Micro Volts. Necessary Schematic/Wiring Diagram Printed On The Panel To Follow And Conduct Experiments. User Manual And 4Mm Patch Cords Supplied. Accessories Included: Necessary Dc Power Supplies, Ratio Boxes & Galvanometer Are Provided Alongwith The Unit.] , Cro Demonstration Kit [Crt : 6Rectangular Screen With Internal Graphical 8X10 Division (1Div-1Cm) Vertical Deflection Display : Ch1, Ch2, Add, Alt & Chop Deflection Factor : 5Mv/Div To 5V/Div +3%, 1Mv/Div To 1V/Div, +5% (X5), 10 Steps Rise Time : <17.2Ns Maximum Input Voltage : 250 (Dc + Ac Peak Value) When <1Khz (250V, Dc +Ac) Input Coupling : Ac, Dc & Gnd Polarity Selection : + (Ch2 Only) Display Mode : 1, 10 & X-Y Horizontal Deflection Time Base : 0.2Us/Div To 0.2S/Div, 9 Ranges Sweep Expansion : X10 Accuracy : +3% Triggering Mode : Auto, Norm, Tv-V, Tv-H Triggering Source : Int, Line & Ext. Trigger System Auto : 20Hz-20Mhz Norm : 0.5 Div Int, 0.5 Vp-P Ext Tv-H : At Least 1 Div Or 1 Vp-P Input Impedance : 1Mohm X-Y Phase Difference : <3 Degree, Dc-50 Khz Calibration Waveform : Frequency 1Khz 2%,Voltage 0.5 V 1%, Block Diagram Printed On The Top Panel, Power Requirement: 220 Vac +10% , 50 Hz] , Q-Meter Kit Formeasurement Ofq Of Coils. [Inductance Range:199.9Mµh-19.99H Resistance Range (Ohm):19.99O-19.99M? Capacitance Range:199.9P-1.999?F Capacitance Accuracy: ±(1%±2) Digital Lcr Bridge Meter Power:220 Volts/50Hz ±10%] , Spectrum Analyzer Trainer Kit [Industry Standard Specification To Perform Relevant Experiments. ] , Public Address System Trainer Kit [To Test The Performance Of Loudspeaker And Microphone; Power Output: 100W Rms At 10% Thd Pre-Amplifier Output: 200Mv; Line Output: 1V/ 1K?; Input Channels: Mic: 2Nos; Frequency Response : 65 Hz To 15 Khz +/- 3Db Tone Controls : Bass, Treble, Master 1Control; Speaker Outputs : 4 , 8 , 16 , 70-100V Line Matching; Speakers : 2 Nos; Microphones : 2 Nos(Dynamic Microphone)] , Demonstration Kit Of Black & White Tv Trainer [To Learn The Practical Aspects And Faults Which Would Occur Often In The Black And White Tv. All The Fault Switches Are Provided To Conduct Fault And Observe The Output. The Test Points Are Provided To Determine The Voltages At The Different Sections Of The Tv And Observe The Signal Output Of The Various Sections. The Output Is Monitored On A 20” Picture Tube.] , Demonstration Kit Of Colour Pattern Generator For Colour Tv [They Should Be Able To Make Various Patterns, Including Vertical Bar Patterns, Horizontal Bar Patterns, Circle Patterns, 100% White Patterns, Check Patterns, Horizontal Bar Patterns, Vertical Bar Patterns, Color Bar Patterns, Red Color Patterns, Green Color Patterns, Blue Color Patterns,Yellow Color Patterns, Magenta Color Patterns, And Cyan Color Patterns. Learning Materials To Be Included: Theory, Procedure, Reference Results, Etc.] , Demonstration Kit Of Colour Led Tv Trainer [Display Type: Led; Hd Screen Size: 24 Inch (50Cm) Or More; Display Resolution: 1600 X 900 Pixels Or More; Video Interface: Video Input/ Vga, Hdmi And Or Dvi Input; Audio Output Power: 8W X 2; Receiving System: Pal Bg/I/Dk And Ntsc; Channel Coverage: Vhf-2-12, Uhf21-69; Catv (X~Z+2, S11s41) Mains Supply: 110-260V Ac ± 10%, 50/60Hz; Power Consumption: 35W] , Demonstration Kit Of Dth Trainer Kit [Colour Tft Lcd: 5.7” Tft Lcd; Rf Input: 950 - 2150 Mhz; Rf Output: 470 Mhz Two 862Mhz; Video Output: Pal/Ntsc; Uplink Satellite: Insat 4B; Test Points: 34 Nos.; Included Accessories: Mains Cord, Power Supply, Remote, Dish Antenna With Accessories, Lnb] , Demonstration Kit Of Photocopier [Interface Hi-Speed Usb 2.0 Copy Speed Simplex To Simplex Up To 20 Ppm In A4 (21 Ppm In Letter) Scan Method Color Cis Compatibility Twain, Wia Fault-Creating Facilities For Crum, Thermistor, Stepper Motor, Pickup Clutch, Feed Sensor, Width Sensor, Scanner Stepper Motor, Scanner Sensor, And Printer Door. Various Fault Switch With Test Points Provided On-Board.] , Demonstration Kit Of Fully Automatic Washing Machine Trainer Kit [Semi/Fully Automatic Washing Machine Mechanical Controls 30 Minutes Timer, Wash/Spin Control Atleast 6 Liter Capacity Machine Fault Switches For Wash Motor, Spin Motor, Lid Opening, Buzzer Etc All Faults Are Mounted On Pcb With Enclosure] , Demonstration Kit Of Microwave Oven Trainer Kit [Type: Solo; Capacity: >15 Ltr; Power Consumption: 600 Watt Or More: Child Lock And Alarm, Various Test Points] , Demonstration Kit Of Refrigerator [Industry Standard Specification To Perform Relevant Experiments. ] , Demonstration Kit Of Air Conditioner. [Industry Standard Specification To Perform Relevant Experiments. ] , Tdmpulse Code Modulation Trainer Kit [Crystal Frequency: 12/16 Mhz On Board Generators, 1. Adjustable Amplitude Sine Generator Of 500Hz & I Khz (Synchronised) 2. Variable Amplitude Dc Level (2 Nos.) Input Channels: Two Multiplexing: Time Division Multiplexing Modulation: Pulse Code Modulation Sync Signals: Pseudo Random Sync. Code Modulation Error Check Code: Off, Odd, Even, Hamming Operating Modes: Fast 240 Khz Channel (Approx) And Slow I Khz Channel (Approx) Pc - Pc Communication: 2 Channel Via Rs 232 Baud Rate: Selectable From 300 To 2400 Fault Switches : 8 Nos. Through 8 Way Dip Switch For Troubleshooting At Different Blocks Should Include Various Test Points] , Tdm Pulse Code Demodulation Trainer Kit [2 Channel Time Division Multiplexed Pulse Code Modulation Receiver. Fast (240 Khz/Channel Approx) And Slow (1Hz. /Channel Approx.) Mode Of Operation Pseudo Random Sync. Code Generator For Frame Synchronization. Receiver Clock Generation Using Pll. Error Detection Of None, Even, Odd, Hamming. Error Correction Using The Hamming Code Technique None, Even, Odd, Hamming Parity Selections Two Nos. Of 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz. Four Switched Faults For Fault Selection Block Description Screen Printed On Glassy Epoxy Pcb] , Fdm Transmitter / Receiver Kit [Two Variable Modulating (Sinusoidal) Input Channels With Provision Of Voice Inputs Two Dsbsc Modulators For Frequency Band Translation Of Two Test Signals Two Carrier Generators Two Sets Of Audio Input Amplifier One Adder/Transmission Amplifier Two Demodulators Two Low Pass Filters For Smooth Output] , Ask / Psk / Fsk Modulation And Demodulation Kit [The Kit Should Have An Integrated Ask / Psk / Fsk Modulation And Demodulation. Various Functional Block Diagrams Are Provided On-Board For Teaching/Training. Test Points To Visualize The Signals On Oscilloscopes] , Microwave Test Bench (Klystronbased) [Complete Klystron-Based Test Bench Study Of The Characteristics Of The Klystron Tube And To Determine Its Tuning Range, To Determine The Frequency & Wavelength In A Rectangular Waveguide Working On Te 10 Mode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , Microwave Test Bench (Gunn Based) [To Study The V-I Characteristics Of Gunn Diode, To Study The Voice Communication By Using Microwave Test Bench, To Study The Following Characteristics Of Gunn Diode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , 24 Awg Tinned Single Strand Jumper Wire Spool Blue Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Green Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Red Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Black Colour [90 Meter Spool] , Flexible Electric Wire [2 Core, Twisted Flexible, Red And Black, 0.5 Sq Mm Copper Core, 50M Length] , Soldering Wire [Flux Core, Coil Type (Wire Of 100Gm )] , Inductor 1 Mh [8X10 Mm Radial Leaded Power] , Inductor 10 Mh [8X10 Mm Radial Leaded Power] , Led Red, Green, Blue, White Colour. Fifty Numbers Of Each Colour Led. [0.5W, Through Hole Type] , Ic 7400 [Ttl Ic-Quad 2-Input Nand Gate] , Ic 7402 [Ttl Ic-Quad 2-Input Nor Gate] , Ic 7404 [Ttl Ic-Hex Inverter Gate] , Ic 7408 [Ttl Ic-Quad 2-Input And Gate] , Ic 7432 [Ttl Ic-Quad 2-Input Or Gate] , Ic 7486 [Ttl Ic-Quad 2-Input Xor Gate] , Ic 7474 [Ttl Ic-Dual D Positive Edge Triggered Flip-Flop, Asynchronous Preset And Clear] , Ic 7476 [Ttl Ic-Dual J-K Flip-Flop, Asynchronous Preset And Clear] , Ic 7490 [Ttl Ic-Decade Counter (Separate Divide-By-2 And Divide-By-5 Sections)] , Ic 7495 [Ttl Ic-4-Bit Shift Register, Parallel In, Parallel Out, Serial Input] , Ic 74200 [Ttl Ic-256-Bit Ram (256X1)] , Ic 74147 [Ttl Ic Encoder] , Ic 74138 [Ttl Ic 3 To 8 Line Decoder] , Ic74151 [Ttl Ic Multiplexer] , Ic74138 [Ttl Ic Demultiplexer] , Ic 74169 [Ttl Ic Up-Down Counter] , Ic 74180 [Ttl Ic Parity Checker/Generator] , Ic 74Ls83 [Ttl Full Adder With Carry Ic] , Ic 74330 [Ttl Ic-Pla (12 Inputs, 50 Terms, 6 Outputs)] , Ic 4077 [Cmos Ic Xnor Gate] , Ic 4001 [Cmos Ic Nor Gate] , Ic 4011 [Cmos Ic Nand Gate] , Ic 4070 [Cmos Ic Exor Gate] , Ic 4071 [Cmos Ic Or Gate] , Ic 4077 [Cmos Ic Ex-Nor Gate] , Ic 4081 [Cmos Ic And Gate] , Ic 4093 [Cmos Ic Nand Gate] , Ic74ls47 [Bcd To 7-Segment Decoder/Driver Ic (7447 Ic) Dip-16 Package] , Lts542 [7-Segment Display - Common Anode] , Lts543 [7-Segment Display - Common Cathode] , Ic Dac0808 [Dac0808 8-Bit Digital To Analog D/A Converter Ic Dip-16 Package] , Ic Adc0809 [Adc0809 8-Bit A/D Converter With 8-Channel Multiplexer Ic Dip-28 Package] , Ic723 [Voltage Regulator Ic Input Voltage Up To 40V Output Voltage Adjustable From 2 To 37V Positive Or Negative Supply Operation Series, Shunt, Switching Or Floating Operation Output Current To 150Ma Without External Pass Transistor Adjustable Current Limiting] , Icl8038 [Function Generator Ic Wide Frequency Range - 0.001Hz To 300Khz Variable Duty Cycle - 2% To 98% High Level Outputs - Ttl To 28V Simultaneous Sine, Square, And Triangle Wave Outputs] , Ad633 [Analog Multiplier Ic 4-Quadrant Multiplication Low Cost, 8-Lead Soic And Pdip Packages Complete—No External Components Required Laser-Trimmed Accuracy And Stability Total Error Within 2% Of Full Scale Differential High Impedance X And Y Inputs High Impedance Unity-Gain Summing Input Laser-Trimmed 10 V Scaling Reference] , Lm566 [Vco Ic Wide Supply Voltage Range: 10V To 24V Very Linear Modulation Characteristics High Temperature Stability Excellent Supply Voltage Rejection 10 To 1 Frequency Range With Fixed Capacitor Frequency Programmable By Means Of Current, Voltage, Resistor Or Capacitor] , Ic Ne555 [Ne555 Timer Ic Dip-8 Package, Pack(Set) Of 30 Ics] , Ic 741 Op-Amp (Dip) [741 Ic - Dip Package - General Purpose Op-Amp Ic, Pack(Set) Of 50 Op-Amps] , Transistor 2N3904 [Pack (Set) Of 20 Transistors] , Transistor Bc107b [Pack (Set) Of 20 Transistors] , Diode 1N4007 [Pack (Set) Of 50 Diodes] , Fet- Bfw10 [Pack (Set) Of 50 Field Effect Transistors] , Zener Diode 5.6V, 1W [Pack (Set) Of 20 Zener Diodes] , Potentiometer 1 K?, 10 K?,100 K? Power Rating: 1W [20 Nos Of Each Value] , Wire Stripping Pliers, 6 Inch Long [Stainless Steel, Rust Resistant.] , Long Nose Mini-Pliers [Stainless Steel, Rust Resistant.] , Resistor 33O, 56O, 68O, 82O, 100O, 120O, 200O, 220O, 270O, 330O, 390O, 470O, 680O, 1K?,1.5K?. Maximium Power Rating 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Resistor 2.2K?, 2.7K?, 3K?, 4.7K?, 5.6K?, 6.8K?, 8.2K?, 10K?, 20K?, 36K?, 56K?, 68K?, 100K?, 470K?, 1M?, 2M? Maximium Power Rating: 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Disk Ceramic Capacitor Of Values 220 Pf, 0.01 ?F, 0.024?F, 0.1?F, 0.24?F [Pack(Set) 25 Nos Of Capacitors For Each Valueh] , Disk Ceramic Capacitor Of Values 10?F(63V), 100?F, 220?F, 470?F(50V) [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Polypropylene Capacitor Of Values 0.001 ?F,0.01 ?F, 0.1 ?F, 0.22 ?F [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Tantalum Capacitor 10 ?F (25 V) [Pack(Set) Of 25 Capacitors] , Incandescent Bulb, 40W, 100W, 200 W [With Tungstenfilament And B22 Connector]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 10
West Bengal View Result →
4.
Communications and Information Technology  #11104520 AOC
Tender For supply installation testing and commissioning Of It Infrastructural Items, Cctv Surveillance System, Epabx And Voice N/W, Audio Visual Solution For The Conference And Training Room At Igr Office, In The Stp-Ii.- 1 Description 2 SITC of IP 4MP IR Bullet Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 3 SITC of IP 4MP IR Dome Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264 /MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site).Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 4 SITC of 16 Channel IP 4K NVR having minimum technical specification: Video Input: 32 Channel IP Fully Featured NVR; Audio Iuput/Output: 1 Channel Input/2 Channel Outputs, RCA; Display Interface: 2 HDMI (1 HDMI up to 3840 × 2160); 2 VGA; Display Split: 1/4/8/9/16/25/36/64; OSD: Camera title; Time; Video loss; Camera lock; Motion detection; Recording; Compression: H.265/H.264/MJPEG/MPEG4; Resolution: 12 MP (4000 × 3000); 8 MP (3840 × 2160); 6 MP (3072 × 2048); 5 MP (2560 × 1920); 4 MP (2560 × 1440); 3 MP (2048 × 1520); 1080p (1920 × 1080); 720p (1280 × 720); D1 (704 × 576 / 704 × 480); CIF (352 × 288 / 352 × 240); Frame Rate: 1–15 fps (12 MP and 8 MP); 1–25/30 fps (rest of the resolutions); Record Bit Rate: 256Mbps or 200Mbps(when RAID is enabled); Bit Rate: 16 kbps ~ 20 Mbps, per channel; Network Throughput: Input 256Mbps or 200Mbps (when RAID is enabled); Output 256Mbps or 200Mbps (when RAID is enabled); Cascading: Built-in CMS to Monitor and Manage Multiple Matrix NVRs; ONVIF and Major Camera Brands Support; Usb Port: 4; RS232: 1 port (for PC communications and keyboard). Temperature: -10 ºC ~ +55 ºC; REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Wireless Bluetooth Multi Device Keyboard and Mouse. Centralised VMS perpetual license.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 5 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D- LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 350cd/m^2 or nits or higher, Contrast Ratio (Static): 1100:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 6 SITC of Hard Disk .Spec Surveillance Grade HDD of minimum 7200 rpm for storage 8TB storage capacity.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 7 SITC of: Business Communication System with all necessary power accessories: EPBAX system with line: 4 Trunk, 8 Digital & 48 Line Analog Extensions, Expendable up to 96 Analog Extensions with all necessary power accessories; Other Faetures: Hotline, Live Call Supervision, Auto Call Back, Automatic Call, Disconnector, Auto Redial,Call Splitting, Call Conference, Direct Inward Dialing, External Call Forwarding, Executive/ Secretary etc. 8 SITC of Digital Telephone Set 9 SITC of Analog CLI Telephone Set. 10 SITC of: 5 pair Un-armoured Telephone Cable {0.5mm.Dia (Minimum)} 11 SITC of: 200 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete WITH ALL ACCESSORIES. 12 SITC & Laying of PVC conduits(ISI marked) laying through surface with all accessories as required FOR THE ENTIRE SYSTEM WITH ALL OEM ACCESSORIES. (Quality: MMS; Ø=25mm) Quality : ISI, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 13 SITC of ceiling speaker 2 Way, Acoustic Suspension ceiling mount speakers with superior sound quality. Components: LF: 8cone driver; HF: 1 soft dome; Frequency range (-10dB): 55Hz - 20kHz; Nominal coverage: H x V: 100° conical; Power rating: 180W PGM; Transformer taps: 60W, 30W, 15W @ 100V; Sensitivity (1W; 1m on axis): 90dB SPL; Peak: 116dB SPL; Certificate: CE, RoHS; Color- White. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 14 SITC of Multichannel Power Amplifier Output power : 1kHz (THD +N=1%: 4Ω/8Ω) 140W x 4 , Frequency response : 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) , S/N ratio : ≥ 100dB(A-weighted) , Crosstalk : ≤ -60dB. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 15 SITC of column array speaker Full-range, Bass reflex type slim line array/ column array speaker with 8 x 1.5” Cone; Frequency range (- 10dB): 81 Hz – 20 kHz; Nominal coverage: H x V: 170° x 25° - 30°; Power rating: 160 W PGM; Sensitivity (1W; 1m on axis): 91 dB SPL; Peak: 116 dB SPL. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 16 SITC of Multichannel Power Amplifier Output power 1kHz Non-clip 20msec Burst Both channels driven 300W x 2 @ 8Ω & 2Ω and 500W @ 4Ω; Sampling frequency rate: 48kHz; A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling; THD: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power); Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz); Input impedance: 20kΩ (Balance), 10kΩ (Unbalance); I/O Connectors: Speaker output: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4 PHONE(TS) x2; Line Input: XLR-3-31 x2, 1/4 PHONE(TRS) x2; Inbuilt Load protection, Amplifier protection & Power supply protection. 17 SITC of Digital Signal Processor Sampling frequency rate Internal 48kHz/44.1kHz ; Signal delay : 1.9 msec (AD-DA @48kHz), Total harmonic distortion : “0.05% (+4dBu, Gain:-6dB, 48kHz) 0.1% (+4dBu, Gain: +66dB, 48kHz)” (Measured with a 18dB/Oct filter @80kHz) ; YDIF In YDIF RS-422 16IN RJ45 , YDIF Out YDIF RS-422 16OUT RJ45 ; GPI 16IN / 8OUT IN 0V-5V,(IN 16 L(0V-2.5V)/H(2.5V-24V)), Output channel functions : Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter, AEC. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 18 SITC of Digital Control panel 1 Volume & 4 Switch equipped Wall Mounut Control panel for DSP ; Easy connection by CAT5 carrying RS485 + power.Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 19 SITC of Ceiling Microphone Frequency response: 160Hz – 16kHz(- 10dB) or better; Sampling Rate: 48kHz; Bit depth: 24bit; Latency: 60 [ms] (including signal processing) or lower; Audio I/O Dante: 1in x 2out, In1=AEC reference signal／Out1=output of beam mix, Out2= output of beam mix (simple processed); Maximum input level of SPL: 117.8 dB SPL; Self Noise: -0.8 dBA SPL; SNR(Ref. 94 dB SPL at 1 kHz): 94.8 dBA; Sensitivity: -23.8 dBFS/Pa; Dynamic Range: 118.6 dBA; Signal Processing: Multi beam tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain; Power requirements: PoE(IEEE 802.3af), DC 48V; Indicator: Front Indicator(Mute/Unmute & Status) ・Network Port Indicator. (Ceiling Mic & DSP Should be from Same OEM) . Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 20 SITC of L2 Switch for stable operation of a Dante network with Standard IEEE 802.3 (10BASE-T/100BASE-TX/1000BASE-T); Number of ports: 10 Ports; Communication mode: Auto negotiation; Connector type: RJ-45; LAN ports: IEEE 802.3 (1000BASE-T) 2 ports; 8 ports (1-8) PoE Power Supply; PoE Standards: IEEE 802.3at; Max power supply per port: 30 W. 21 SITC of FHD 20x PTZ camera 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be CE, FCC, RoHS & BIS Certified. Warranty: 03 (Three) onsite comprehensive OEM warranty with parts and service. 22 SITC of 86 UHD LED Interactive Display 86, 4K Multi touch interactive display, 450 cd/m2 Panel Technology- IPS, ,Android Pie 11.0, 8 GB Memory, 128 GB storage, Built in Wifi & Bluetooth, 2x20 W - Front Facing Speakers, Continuous Touch Points: 40 Points: Windows,10 Points: Android. Rear port terminals: 4 x HDMI IN, 1 x VGA, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x Micro SD, 1 x secure slot (USB 2.0), 1 x OPS slot (15W), 1 x HDMI Out, 1 x RJ45. Front Port Terminals: 2 x USB2.0 Type-A, 1 x USB2.0 Type-B for touch, 1 x HDMI2.0 Input, Capability to connect & disconnect all devices / group of devices from central location. Application have capability to share and finish casting of BYOD device and have a robust authorization management. Power off & Reboot devices from central location also control external devices such as USB cameras, Speakers, control brightness & clear cache. Device active trend and deactive displays, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, 24x7 operation, with OPS i5, 8GB RAM, 256GB SSD. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 23 SITC of 32 HD Display 32 FHD Ready resolution Android LED display Brightness-500 Nits, Operating Hours- 24x7,with built in 2.4 Ghz Wifi, 1 Ghz Built in Quad core processor, 1.5 GB DDR3 RAM, 8 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, , 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1. 24 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 25 SITC of Wireless Presenter Operating system Windows 10 and higher macOS 11 (BigSur) and higher Android v9 and higher; Video outputs 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-C DisplayPort 1.2 (only Gen2); USB: 1 X USB-A, 1 X USB-C ClickShare Buttons 2, Desktop & Mobile Native protocols: Airplay, Google Cast, Miracast* Maximum number of simultaneous connections (with Buttons and/or App): 32; Noise Level: Max. 25dBA @ 0-30°C Max. 30dBA @ 30-40°C Authentication protocol WPA2-PSK in stand alone mode WPA2-PSK or IEEE 802.1X, Wireless transmission protocol IEEE 802.11 a/g/n/ac and IEEE 802.15.1; Reach: Adjustable with signal strength modulation; max. 30m (100 ft),Frequency band: 2.4 GHZ and 5 GHz. including 2 additional buttons. 26 SITC of 1.5 sq mm Speaker Wire: 27 SITC of CAT6 Cable: 28 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 29 SITC of AUDIO Cable 30 SITC of 10 mtr USB Cable 31 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 32 SITC of Connectors & Interconnects 33 Mics - installation accessories 34 SITC of Digital Podium with 20 or bigger touch display & gooseneck microphone All-in-one Podium with Podium body made from 1.5mm thick CRCA steel, duly powder coated, with security lock cover for Touch display max size 24 Diagonal. With Keyboard tray housing, Mouse, Drawer for doc cam, space for keeping extra laptop/tablet, Gooseneck mic with switch, W/o Central Controller, 360 degree heavy duty movable castor, Open from Front & Back for easy installation, Adjustable Rack, Ample ventilation.Multimedia Controller with Control out put, Multiple input & switchable output. Warranty: 01 (ONE) years onsite comprehensive OEM warranty with parts and service. 35 SITC of Wall Speaker SITC of Wall Mount Speaker with all necessary accessories, having minimum technical specification: System Type: Full range, Acoustic suspension; Components: 3.5 full range; Frequency Range (-10dB): 130Hz-20kHz; Coverage Angle (Horizontal x Vertical): 150° x 160°; Nominal Impedance: 8Ω; Power Rating: 40W; Sensitivity (1W, 1m): 86dB SPL; Maximum SPL (Caluculated, 1m): 105dB SPL; Connectors: 1x Euroblock (4P) (Input: +/-, Loop Thru:+/-); Material, Finish, Color: Black, White; Accessories: Owners Manual, Retaining knob, Terminal cover screw, Wall / Ceiling mount bracket, Terminal cover. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 36 SITC of Mixer Amplifier Output Power : 120W x 2 (20ms Burst) ; Total harmonic distortion : ≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W) ; Crosstalk : ≤ -70dB (MIC/LINE input to other MIC/LINE input) ; Mic/Line Input : Input 1-6: 3.5mm Euroblock (6-pin, balanced) x 3. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 37 SITC of 65 4K display: 65 4K UHD (3840x2160 Ready resolution , Brightness-350 Nits, Operating Hours- 24x7,Built in Android OS LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , Haze-28%, RS232CX1. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 38 SITC of 43 4K UHD (3840x2160) Display Supply, Installation, Testing and Commissioning of 43 4K UHD (3840x2160) Ready resolution Built in Android OS LED display with brightness- 500 Nits, Operating Hours 24x7, built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1, Haze-28%. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 39 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 40 SITC of Wireless Lapel Mic: 24 MHz bandwidth 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal-to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 41 SITC of Wireless Handheld Mic 24 MHz bandwidth: 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 42 SITC of Small format PC for Podium with dual HDMI output: 43 SITC of Ceiling/Wall Brackets for Displays 44 SITC of 1.5 sq mm Speaker Cable: 45 SITC of CAT6 Cable: 46 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 47 SITC of AUDIO Cable 48 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 49 SITC of Connectors & Interconnects
Contract Date: May 17, 2026 Contract Value : ₹ 57.09 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
5.
Educational and Research Institute #11098868 AOC
Tender For Iehe Bhopal Invites Online Tender For Supply Of Sound System In The Institute , Sound System , Wall Mount Cabinet Loudspeaker General Requirements: The Loudspeaker Shall Be A Cost-Effective, 12W General-Purpose Cabinet Speaker Designed For Indoor Surface-Mount Applications. It Must Be Suitable For Both High-Quality Speech Intelligibility And Background Music Reproduction Acoustic Performance: Rated Power: 12W, With Adjustable Power Tappings At 12W, 6W, And 3W To Allow For 3 Db Step Adjustments. Sound Pressure Level (Spl): Must Provide A Maximum Special Of 102.0 Db At 6W/1M (1 Khz) And A Sensitivity Of 91.7 Db At 1W/1M (1 Khz). Frequency Range: The Effective Frequency Range Shall Be From 150 Hz To 15 Khz. Opening Angles: Horizontal: 184° (1 Khz) / 86° (4 Khz). Vertical: 66° (1 Khz) / 58° (4 Khz). Electrical Specifications: Input Voltage: Designed For 100 V Line Systems. Rated Impedance: 833 Ohms. Connection: Shall Feature A 4-Pole Push-In Terminal Block On The Rear Panel For Easy On-Site Wiring And Power Tapping. Durability: The Unit Must Be Tested For 100 Hours Of Continuous Operation At Rated Power In Accordance With Iec 268-5 Standards. Mechanical Construction Enclosure Material: The Main Body Shall Be Constructed From Solid Mdf (Medium Density Fiberboard) Covered In Durable, Easy-To-Clean Black Vinyl. Front Grille: The Front Shall Be Abs Plastic Covered With A Fine Woven Cloth In Matching Black. Baffle Design: Shall Feature An Angled Front Baffle To Optimize Sound Distribution Within The Listening Area. Mounting: The Rear Panel Must Include Three Keyholes For Quick And Secure Wall Mounting. Dimensions: 445 Mm X 151 Mm X 150 Mm / 111 Mm Environmental Limits: Operating Temperature: -5 °C To +55 °C, Storage Temperature: -40 °C To +70 °C , Wireless Microphone System General System Requirements: Classification: The System Shall Be An Entry-Level Professional Wireless Microphone System Designed For Ruggedness And Ease Of Use In Daily Operations. Ease Of Setup: The System Must Include A One-Button Automatic Frequency Scanning Function To Identify The Clearest Available Channel. Transmitter Synchronization Shall Be Achieved Via An Infrared Data Link To Ensure Error-Free Setup. Frequency Management: The System Shall Provide 32 Preset Channels, With Compatible Groups Of Eight Channels For Simultaneous Multi-Channel Use. Operating Bands: The System Shall Be Available In Multiple Rf Frequency Bands, Including: A Band: 618-634 Mhz. B Band: 678-694 Mhz. C Band: 516-532 Mhz. E Band: 850-865 Mhz. Receiver Specifications Type: Synthesized Pll With True Antenna Diversity To Ensure Stable Rf Reception. Chassis: The Receiver Must Feature A True Rack-Mountable Metal Chassis Suitable For Professional Installation. Rf Performance: Sensitivity: 1.0 Μv For 12 Db Sinad. Image Rejection: Greater Than 55 Db. Audio Outputs: Balanced Output: 20 Dbv (Max @ 40 Khz Deviation). Unbalanced Output: Adjustable From 8 Mv To 0.755V Rms. Display: Front-Panel Backlit Lcd Displaying Channel, Frequency, And Battery Status. Handheld Transmitter Construction: The Transmitter Shall Feature A Rugged Metal Body Designed To Withstand The Rigors Of Daily Use. Microphone Capsule: Equipped With A Cardioid Dynamic Capsule (Pl22) For Effective Feedback Control And Ambient Noise Rejection. Battery Life: Must Operate For A Minimum Of 14 Hours Using Two Aa Alkaline Batteries. User Interface: Features A Backlit Lcd Display And A Dedicated Mute Function To Protect The Audio Channel. Bodypack Transmitter Construction: Compact And Rugged Metal Enclosure. Input Connector: Industry-Standard Ta4F Connector For Compatibility With Various Lapel Or Headworn Microphones. Antenna: Flexible External 1/4 Wave Antenna. Acoustic & Environmental Performance System Frequency Response: 80 Hz - 18 Khz ± 2 Db Signal-To-Noise Ratio: 100 Db A-Weighted Total Harmonic Distortion: 1.0%, 0.4% Typical (Ref 1 Khz, 40 Khz Deviation) , Professional Gooseneck Microphone General Requirements: The Microphone Shall Be A Professional-Grade, High-Quality Electret Condenser Gooseneck Microphone Designed For Public Address Applications Such As Lecterns, Podiums, And Open Conferences. It Must Feature A Sleek, Slender, And Unobtrusive Design To Maintain A Clear Line Of Sight For The User. Acoustic & Technical Performance Transducer Type: Electret Condenser. Polar Pattern: Unidirectional (Cardioid) To Ensure High Front-To-Back Rejection, Providing More Gain Before Feedback. Frequency Response: Wide Range From 20 Hz To 18,000 Hz. Sensitivity: 7.5Mv/Pa Power Requirement: Operable Via A Dc Power Source Ranging From 1.5V To 9V. Mechanical Specifications Overall Length: 585 Mm (Approximately 23 Inches) Output Connector: Built-In 3-Pin Xlr Male Socket For Secure And Standard Professional Connectivity. Optional Accessories (Compatibility) To Ensure System Flexibility, The Microphone Must Be Compatible With The Following Manufacturer-Specific Accessories: Microphone Base: A Sturdy, Heavy-Duty Die-Cast Aluminium Base With An Integrated On/Off Switch, Led Indicator, And Built-In Housing For 2 Times 1.5V Um-3 Aa Cells To Power The Condenser Element. Mic Stand Adaptor: A Rugged Aluminium Die-Cast Body With A Female Xlr Connector For Direct Mounting And A Male Xlr Bottom Connector For Cable Attachment. It Must Include A 10-Meter Shielded Cable And A Threaded Brass Ferrule 5/8 27 Tpi For Standard Stand Mounting. , Mixer Amplifier General System Requirements Type: The Unit Shall Be A Professional 120W Mixer Amplifier With Integrated Usb And Bluetooth Capabilities, Designed For Public Address And Background Music Applications. User Interface: The Amplifier Shall Feature A Simplified User Interface With Preferred Setting Indicators (Colored Pins) For All Front-Panel Knobs To Ensure Ease Of Operation For Non-Technical Users. It Must Include An Led Vu Meter For Visual Output Level Indication And A 6.3 Mm Headphone Socket For Monitoring The Mixer Output. Reliability: The Unit Shall Have No Moving Parts (Such As Hard Drives) To Ensure Long-Term Operational Reliability. Audio Inputs And Media Source Microphone/Line Inputs: Four (4) Balanced Inputs, Switchable Between Microphone And Line Level Sensitivity. Switchable Phantom Power Must Be Available To Support Condenser Microphones. Priority Handling: Input 1 Shall Have The Capability To Take Priority Over All Other Inputs Via Contact Closure (Push-To-Talk) And Include An Optional 2-Tone Chime To Precede Announcements. Music Source: Integrated Media Player: Must Support Playback Of Mp3 And Wav Files (From 32 Kbit/S) Via A Usb Pen Drive (Up To 32Gb Capacity). Wireless Streaming: Built-In Bluetooth For High-Quality Audio Streaming From Mobile Devices. Remote Control: The Unit Must Be Supplied With An Ir Remote Control For The Integrated Music Source. Aux Input: A Separate Stereo Cinch Input, Internally Converted To Mono, With A Sensitivity Of 200 Mv To 300 Mv. Audio Performance And Output Output Power: 120W Rated Output Power. Loudspeaker Outputs: Constant Voltage: 100 V. Low Impedance: 4-Ohm. Call-Only Output: A Dedicated 100 V Call-Only Channel For Priority-Only Areas Or 3-Wire Remote Volume Control Override. Frequency Response: 80 Hz To 18 Khz (+1/-3 Db At -10 Db Ref. Rated Output). Distortion: 1% At Rated Output Power (1 Khz). Tone Control: Dedicated Bass And Treble Controls Providing Max ± 8 Db Adjustment. System Protection: An Integrated Limiter Circuit Must Be Included To Protect The Output Stage From Signal Clipping And Overload. Insert Feature: A Pair Of Rca Cinch Connectors Shall Be Provided To Allow The Unit To Be Used As A Separate Pre-Amplifier And Power Amplifier. Mechanical And Environmental Dimensions: 100 Mm X 430 Mm X 290 Mm (Standard 19 Wide, 2U High). Mounting: Suitable For Both Stand-Alone Use And 19 Rack Mounting. Operating Temperature: -5 °C To +45 °C. Compliance: The Unit Shall Comply With Iec 62368-1 (Safety), Cispr 32 (Emc Emission), And En 55103-2 (Emc Immunity). , Mixing Console General Requirements The Mixing Console Shall Be A Compact, Versatile 6-Channel Analog Mixer Designed For A Wide Range Of Professional Audio Applications. It Must Feature High-Quality Microphone Preamplifiers And A Rugged Construction Suitable For Both Portable And Fixed Installations. Audio Inputs And Processing Input Channels: The Unit Shall Provide A Total Of 6 Line Inputs, Configured As 2 Mono And 2 Stereo Channels. Microphone Preamplifiers: The Console Shall Include 2 Microphone Inputs Featuring Discrete Class-A D-Pre Preamps With An Inverted Darlington Circuit For Superior Sound Quality. Switchable +48V Phantom Power Must Be Available For All Microphone Inputs. Channel Processing: Mono Inputs (Ch1-2) Shall Include A 26Db Pad For High-Level Sources. Each Mono Channel Shall Feature A High-Pass Filter (Hpf) Set At 80Hz With A 12Db/Octave Slope. Equalization For Mono Channels Shall Consist Of A 2-Band Eq: High (10Khz Shelving) And Low (100Hz Shelving) With Pm15 Db Adjustment. Output And Bus Section Buses: The Console Shall Feature 1 Stereo Bus. Outputs: Stereo Out: Provided Via 2 Xlr-3-32 And 2 Phone Jacks (Balanced). Headphones: One (1) Stereo Phone Jack Output With A Dedicated Level Control. Monitoring: Visual Monitoring Shall Be Provided By A 2 Times 7 Point Led Level Meter (Peak, +6, +3, 0, -3, -10, -20Db). Technical Performance Frequency Response: Pm 0.5Db From 20Hz To 20Khz (Referenced To Nominal Output Level @ 1Khz). Total Harmonic Distortion (Thd): 0.01% @ +8Dbu (20Hz To 20Khz), Gain Knob: Min 0.003% @ +18Dbu (1Khz), Gain Knob: Min Hum & Noise: Equivalent Input Noise Of -128 Dbu (Mono Input Channel, Rs: 150Ω, Gain Knob: Max) Crosstalk: -88Db @ 1Khz. Mechanical And Electrical Specifications Chassis: The Unit Shall Be Housed In A Robust, Impact-Resistant, Powder-Coated Metal Chassis. Power Supply: External Ac Adapter: Pa-130 (120V 60Hz) Or Mu18 (100-240V 50/60Hz) Or Equivalent. Power Consumption Shall Be Approximately 12W. , Indoor Wi-Fi6 Access Point General System Requirements Type: The Unit Shall Be A High-Performance, High-Speed 11Ax (Wi-Fi 6) Indoor Dual-Band Ceiling-Mounted Wireless Access Point (Ap). Standard Support: The Wireless Access Point (Ap) Shall Strictly Adhere To The Ieee 802.11Ax (Wi-Fi 6) Standard. Radio Configuration: The Unit Must Be A High-Power Industrial Ceiling-Mounted Ap Featuring 2X2 Mimo Technology For Both 2.4 Ghz And 5 Ghz Bands. Performance: The System Must Provide A Combined Wireless Data Rate Of Up To 3 Gbps To Support High-Speed Applications Such As 4K/8K Streaming And Vr/Ar. User Capacity: The System Shall Support A High Density Of Users, Accommodating Up To 128 Concurrent Users (Max 64 Users Per Band). Advanced Features: The Ap Shall Support Multi-User Mimo (Mu-Mimo), Orthogonal Frequency Division Multiple Access (Ofdma), Bss Color Bit, And Dynamic Cca-Sd For Improved Interference Management. Hardware Specifications Chipset: The Ap Shall Be Equipped With A High-Performance 4-Core Qualcomm Chipset. Ram: 512Mb Ddr3. Antenna: Integrated Internal 4X4Dbi Dual-Band Mimo Antennas. Combined Rate: A Concurrent Wireless Rate Of Up To 3000 Mbps. Physical Interfaces: 1 X 10/100/1000Mbps Wan/Poe Port. 1 X 10/100/1000Mbps Lan Port. 1 X Reset Button. Provision For A Dc2.0 12V 1.5A Power Connector. Support For Power Over Ethernet (Poe) Following Ieee 802.3Af/802.3At Standards. Thermal Management: The Unit Shall Feature A Heat Sink With A Snap-On Structure And Special Surface Coating To Optimize Heat Dissipation. Indicators: Led Status Lights For Power, Cloud Connection, Lan Speed, 2.4Ghz Status, And 5.0Ghz Status. Audio & Network Management Quality Of Service: Must Support Wmm (Wireless Multimedia Prioritization). Roaming: Support For Seamless Roaming To Ensure Uninterrupted Connectivity For Mobile Clients. Deployment: Flexible Deployment Options Including Standalone Mode, Mobile App Management, And Zero Touch Provisioning (Ztp). Network Management: Support For Vlan Settings, Cloud Access (In Gateway Mode), And System Logging. Management: Support For Remote Configuration And Management. Maintenance: Features For Backup/Restore Configuration, Factory Reset, Scheduled Reboots, And Lifetime Firmware Upgrades. Security Requirements Encryption: Must Support Wi-Fi Protected Access 3 (Wpa3) And Wired Equivalent Privacy (Wep) 64-Bit, 128-Bit, And 156-Bit. Access Control: Integrated Mac Address Filtering And Wireless Access Control To Identify Authorized Devices. Management Security: Secure Socket Layer (Ssl) For Remote Management Login And The Ability To Block Ssid Broadcasting. Environmental & Reliability Operating Limits: Working Temperature: -10°C To 55°C. Storage Temperature: -40°C To 70°C. Humidity: 5% To 95% Non-Condensing. Protection: Esd: Air ±8K, Touch 6K. Electrical Surge: Common Mode 2K, Differential Mode 1K. Power Efficiency: Maximum Power Consumption Shall Not Exceed 16 Watts. Oem Warranty And Support Local Presence: The Original Equipment Manufacturer (Oem) Must Have An Authorized Service Center Or Registered Office In Madhya Pradesh (Proof Of Gst/Msme/Registration Required With Bid). Warranty: A 2-Year On-Site Hardware Replacement Warranty Is Required, With New Hardware Provided Within 12 Hours Of A Call Lock (No Refurbished Or Repaired Products). Technical Support: On-Site Support Must Be Available Within 6 Hours Of A Request. Future Warranty & Support: Oem Must Have Warranty And Support Pack Purchase Option Before Expiry Of Warranty Period For Next Years. Service Availability: The Oem Must Provide A 24X7 1800-Series Toll-Free Number With Support Available In The Local Hindi Language. Product Life Cycle: The Quoted Product Must Have A Life Cycle Of No Less Than 5 Years From The Date Of Supply, Including Lifetime Free Firmware And Technical Assistance. Certifications: The Product Must Be Ce, Fcc, Rohs, Iec 15408 And Iso 9001. Certified. Bidder Must Have To Submit Compliance On Oem Letter Head Along With Maf. , Network Wall Mount Rack Must Have To Supply And Installation Of 15U 500X550 Network Wall Mount Rack With Glass Door And Lock With Hardware, 6 Socket Industrial Pdu 15Amp With Mcb, Cable Manager, Fan, Hardware And Etc. , Goosneck Mic Cable, Speaker Cable In Meter, Installation And Accessories Complete Job Work With Required Cables, Frpvc Conduit, Accessories, Fitting, Installation And Etc.
Contract Date: Jun 09, 2026 Contract Value : ₹ 2.02 Lakh
Local Bodies No of Bidders 3
Madhya Pradesh View Result →
6.
Educational and Research Institute #10910485 Technical Bid
Tender For Supply, Installation, Testing And Commissioning Of Public Address System At Kuttambalam, Kerala Kalamandalam , Supply, Installation, Testing And Commissioning Of Public Address System At Kuttambalam, Kerala Kalamandalam (Before Quoting The Rate, The Bidder Shall Carefully Read The Conditions In The Nit And The Accompanying Special Conditions.) The Rates Quoted Are All-Inclusive And Include A Comprehensive Annual Maintenance Contract For One Year After The Oem Warranty Period Of Two Years.) The Reference Make And Model Mentioned Are Provided Solely To Indicate The Required Technical Specifications And Performance Standards Of The Item To Be Supplied. Bidders May Offer Any Approved Make, Provided That Such Products Fully Comply With Or Exceed The Specified Technical Parameters And Quality Requirements. , Powered Line-Array Loudspeaker Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Two-Way Self-Powered Line-Array Loudspeaker Module Suitable For Live Sound Reinforcement, Auditorium, Touring, And Fixed Installation Applications, Incorporating Dual Low-Frequency Neodymium Transducers Of Approximately 6-7 Inches Each And A High-Frequency Compression Driver With Waveguide, Driven By Integrated Class-D Amplification With Built-In Dsp Processing For Crossover, Equalization, Delay, Limiting, And System Protection. The Loudspeaker Shall Deliver Continuous Power Handling In The Range Of Approximately 500-800 W Or Higher, Maximum Sound Pressure Level Of Not Less Than 130 Db Spl, Usable Frequency Response Extending Approximately From 60 Hz To 17 Khz Or Wider, And Horizontal Coverage Of About 100°-120°, Suitable For Scalable Vertical Array Deployment. The Enclosure Shall Be Of Rugged, Tour-Grade Construction With Integrated Rigging Hardware Enabling Safe Suspension Or Ground-Stacked Line-Array Configuration, And Shall Include Balanced Audio Input/Output Connectivity, Network Or Software-Based Control/Monitoring Capability Where Applicable, Power Cabling, Flying Accessories, And All Necessary Mounting Hardware Required For Complete System Deployment. The System Shall Be Fully Compatible With Professional Subwoofer Systems And Digital Audio Infrastructure, And Shall Be Supplied Complete With All Accessories, Interconnections, Documentation, Installation, Alignment, Testing, And Commissioning, Ensuring Uniform Coverage, Phase Coherence, Safe Rigging Compliance, And Noise-Free Operation In Accordance With Approved Technical Standards And Site Requirements. Reference Make & Model: Jbl Srx 906La Jbl Professional / Rcf / Db Technologies / Qsc / Wharfedale Pro , High-Power Powered Subwoofer Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Low-Frequency Subwoofer System Suitable For Live Sound Reinforcement, Auditorium, Touring And Fixed Installation Applications, Incorporating A Minimum Single 18-Inch High-Excursion Low-Frequency Transducer Housed In An Acoustically Optimized Enclosure And Driven By Integrated High-Efficiency Class-D Amplification With Built-In Dsp Processing For Crossover, Equalization, Delay, Polarity Control, Limiting, And Comprehensive System Protection. The Unit Shall Deliver Continuous Amplifier Power Of Not Less Than Approximately 1000 W Rms (Or Higher), Maximum Peak Sound Pressure Level Of Not Less Than About 130 Db Special And Usable Low-Frequency Response Extending To Approximately 35 Hz Or Lower, Suitable For Integration With Professional Full-Range And Line-Array Loudspeaker Systems. The Enclosure Shall Be Of Rugged Tour-Grade Construction With Durable Finish, Integrated Handles, Pole-Mount Provision For Satellite Loudspeakers, And Provision For Safe Ground-Stacking Or Transport, And Shall Include Balanced Audio Input And High-Pass Filtered Output Connectivity, Selectable Presets Or Network/Software-Based Control And Monitoring Where Applicable, Power Cabling, And All Necessary Mounting And Interconnection Accessories Required For Complete Deployment. The System Shall Be Supplied Complete With All Accessories, Interconnections, Documentation, Installation, Alignment, Testing, And Commissioning, Ensuring Proper Phase Integration, Uniform Low-Frequency Coverage, Safe Electrical And Mechanical Operation, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Fully Operational High-Power Subwoofer Solution. Reference Make & Model Jbl Srx 918S Approved Makes: Jbl Professional / Qsc / Rcf / Db Technologies / Wharfedale Pro , Compact Array Flying Frame For Powered Line-Array Loudspeaker Supply, Installation, Testing And Commissioning (Sitc) Of A Certified Compact Array Flying Frame Compatible With The Offered Professional Line-Array Loudspeaker System, Suitable For Suspension Or Ground-Stack Deployment In Live Sound, Auditorium, Touring, And Fixed Installations. The Frame Shall Feature A Two-Part Collapsible Or Modular Quick-Deployment Design, Constructed From High-Strength Corrosion-Resistant Metal, And Shall Be Rated To Safely Support The Complete Loudspeaker Array With Appropriate Safety Factor In Compliance With Relevant Rigging And Safety Standards. It Shall Include Secure Locking Mechanisms, Adjustable Tilt/Angle Provision, Certified Suspension Points, And Compatibility With Standard Lifting Hardware, And Be Supplied Complete With All Necessary Rigging Accessories, Fasteners, Safety Pins, Load-Rated Fittings, And Transport Provisions. Preferred Make & Model: Jbl Eon 710 Approved Makes: Jbl Professional / Yamaha / Qsc / Rcf / Db Technologies / Mackie / Ld Systems , Self-Powered Two-Way Floor Monitor Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Floor Monitor Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Sound Applications, Incorporating A Custom-Designed 10-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Waveguide, Driven By Integrated High-Efficiency Class-D Amplification Delivering Not Less Than 1300 W Peak And 650 W Continuous Power, With Maximum Sound Pressure Level Of Approximately 125 Db Or Higher And Usable Frequency Response Extending Approximately From 52 Hz To 20 Khz. The Unit Shall Include A Built-In Multi-Channel Digital Mixer, Advanced Digital Signal Processing Derived From Professional Audio Processing Platforms Providing Equalization, Delay, Crossover, Feedback Control, And Protection Functions, Along With Balanced Xlr/Trs Combo Inputs, Bluetooth Or Equivalent Wireless Audio/Control Capability, And Balanced Xlr Link/Thru Output. Input Impedance, Gain Range, And Crossover Characteristics Shall Be Suitable For Professional Microphone- And Line-Level Operation. The Enclosure Shall Be Of Rugged, Acoustically Optimized Construction Suitable For Wedge-Monitor Or Pole-Mounted Deployment, Incorporating Integral Handles, Stable Base Geometry, And Durable Finish For Continuous Professional Use. The System Shall Be Supplied Complete With All Required Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Safe Electrical Performance, And Full Functional Compliance In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Deployable Powered Floor-Monitor Solution. Reference Make & Model: Jbl Eon 710 Approved Makes: Jbl Professional / Yamaha / Qsc / Rcf / Db Technologies / Mackie / Ld Systems , Supply, Installation, Testing And Commissioning Of: A 24-Channel Analog Mixing Console. A Professional Multi-Channel Analog Mixing Console Suitable For Live Sound Reinforcement And Auditorium Applications, Comprising A Minimum Of 16 Mono Microphone Input Channels With High-Quality, Low-Noise Mic Preamplifiers And +48 V Phantom Power, Along With Additional Stereo Input Channels, Together Forming A 24-Channel Analog Mixing Console, Balanced Xlr/Trs Connectivity, 3-Band Equalization With Sweepable Mid-Frequency And High-Pass Filter On Mono Channels, Equalization On Stereo Channels, Multiple Auxiliary Sends For Monitor And Effects Operation, Built-In 24-Bit Digital Signal Processor Providing Selectable Reverberation, Delay, And Modulation Effects, Subgroup And Main Stereo Bus Routing, Stereo Usb Or Equivalent Interface For Playback And Recording, Led Level Metering, Headphone And Control-Room Monitoring Outputs, Graphic Equalization On Main Outputs, Rugged Metal Chassis Suitable For Continuous Professional Use, And Complete With All Required Accessories, Interconnections, Power Supply, Documentation, Installation, Testing, And Commissioning In Accordance With Approved Technical Standards And Site Requirements. 24-Channel Analog Mixing Console Reference Make & Model: Soundcraft Nano M24 Approved Makes: Sound Craft / Yamaha / Allen & Heath / Mackie / Behringer. , Dynamic Vocal Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wired Dynamic Vocal Microphone Suitable For Live Sound Reinforcement, Stage Performance, Public Address, And Studio Applications, Featuring A Moving-Coil Dynamic Transducer, Cardioid Polar Pickup Pattern For Effective Rear-Noise Rejection And Feedback Control, And Frequency Response Approximately 50 Hz To 15 Khz Optimized For Vocal Clarity. The Microphone Shall Incorporate A Durable All-Metal Body Construction, Integral Pneumatic Or Equivalent Shock-Mount System To Minimize Handling Noise, And Balanced Low-Impedance Xlr Output Compatible With Standard Professional Audio Mixing Consoles And Pa Systems. The Unit Shall Be Supplied Complete With Microphone Clip/Holder, Thread Adapter, Protective Storage Pouch Or Case, And Necessary Interconnection Accessories, And Shall Be Installed, Tested, And Commissioned To Ensure Noise-Free Performance, Proper Signal Integrity, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Vocal-Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 58 Approved Makes: Shure / Sennheiser / Akg / Audix , Dynamic Instrument Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wired Dynamic Instrument Microphone Suitable For Live Sound Reinforcement, Studio Recording, Public Address And Installed Audio Applications, Incorporating A Moving-Coil Dynamic Transducer, Cardioid Polar Pickup Pattern For Effective Off-Axis Noise Rejection And Feedback Control, And Frequency Response Approximately 40 Hz To 15 Khz Optimized For Close-Miking Of Musical Instruments, Percussion, And Amplified Sound Sources. The Microphone Shall Feature A Rugged All-Metal Body Construction, Integral Pneumatic Or Equivalent Internal Shock-Mount System To Minimize Handling Noise And Vibration, And Balanced Low-Impedance Xlr Output Compatible With Standard Professional Mixing Consoles And Pa Systems Without The Need For External Power. The Unit Shall Be Supplied Protective Storage Pouch Or Case And Necessary Interconnection Accessories, And Shall Be Installed, Tested, And Commissioned To Ensure Noise-Free Performance, Proper Signal Integrity, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Instrument-Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 57 Approved Makes: Shure / Sennheiser / Akg / Audix , Professional Drum Microphone Package Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Complete Drum Microphone Package Suitable For Live Sound Reinforcement, Studio Recording, And Installed Performance Applications, Comprising Not Less Than Seven Wired Microphones Including One Dedicated Low-Frequency Kick-Drum Dynamic Microphone, Multiple Dynamic Microphones For Snare And Tom Applications, And A Pair Of Condenser Overhead Microphones Of Identical Make And Model Requiring Standard 48 V Phantom Power, All Featuring Cardioid Pickup Pattern, High Sound-Pressure-Level Handling Capability, Balanced Xlr Output Connectivity, And Frequency Response Optimized For Percussion Instruments. The System Shall Be Supplied Complete With Drum-Rim Mounting Hardware, Microphone Clips, Appropriate Interconnection Cables Where Applicable, And A Durable Protective Carrying Case, Forming A Fully Deployable Drum-Miking Solution Compatible With Standard Professional Audio Mixing Consoles And Pa Systems. The Equipment Shall Be Of Robust Construction Suitable For Continuous Professional Use And Shall Include All Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning In Accordance With Approved Technical Standards And Site Requirements. Reference Make & Model: Shure Pga Drumkit 7 Shure / Sennheiser / Akg / Audix , Compact Overhead Condenser Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Overhead Condenser Microphone System Suitable For Speech Reinforcement, Choir Capture, Conferencing, And Installed Sound Applications, Comprising A Miniature Condenser Microphone Capsule With Flexible Gooseneck Or Suspension Provision And Interchangeable Polar Pattern Cartridges (Minimum Omnidirectional And Cardioid) To Enable Adaptable Coverage. The Microphone Shall Provide Wide And Natural Frequency Response Approximately 50 Hz To 17 Khz, High Dynamic Range (˜ 95 Db Or Greater), Minimum Common-Mode Rejection Of About 45 Db, And Balanced Low-Impedance Output With Defined Polarity, Ensuring Clear And Accurate Sound Reproduction With Low Noise And Distortion. The Unit Shall Operate On Standard Phantom Power In The Range Of Approximately 11 V To 52 V Dc With Low Current Consumption, And Shall Include An In-Line Or Integrated Preamplifier With Controlled Clipping Characteristics Suitable For Professional Audio Systems. The System Shall Be Supplied Complete With Suspension Accessories, Interchangeable Cartridges, Necessary Interconnection Components, Documentation, Installation, Testing And Commissioning, Ensuring Stable Overhead Deployment, Noise-Free Performance, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Fully Deployable Overhead Condenser Microphone Solution Suitable For Continuous Installed Use. Reference Make & Model : Shure Mx202 Shure / Audio-Technica / Akg / Electro-Voice / Earthworks / Samson / Peavey , 12-Inch Powered Two-Way Loudspeaker With Tripod Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Full-Range Loudspeaker Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Sound Applications, Incorporating A Custom-Designed 12-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Waveguide, Driven By Integrated High-Efficiency Class-D Bi-Amplification Delivering Not Less Than 1300 W Peak And 650 W Continuous Power, With Maximum Peak Sound Pressure Level Of Approximately 127 Db Or Higher And Usable Frequency Response Extending Approximately From 50 Hz To 20 Khz. The Loudspeaker Shall Provide Nominal Dispersion Coverage Of About 100° (H) × 60° (V), Balanced Xlr/Trs Combo Audio Inputs With Xlr Link/Thru Output, And Integrated Advanced Digital Signal Processing Including Equalization, Delay, Feedback Suppression, Ducking, And Protection Functions, Together With A Built-In Multi-Channel Digital Mixer, Bluetooth Or Equivalent Wireless Audio/Control Capability, And User-Interface Display For System Configuration. The Enclosure Shall Be Of Rugged, Acoustically Optimized Portable Construction With Integral Handles, Pole-Mount Provision, And Durable Finish Suitable For Continuous Professional Deployment. The System Shall Be Supplied Complete With A Heavy-Duty Adjustable Tripod Speaker Stand Compatible With The Loudspeaker Pole Socket, Incorporating Stable Base Design, Height-Locking Mechanism, And Adequate Load-Bearing Capacity For Safe Operation, Along With All Necessary Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Safe Mechanical And Electrical Performance, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Powered Loudspeaker Solution. Reference Make & Model Jbl Eon 712 Jbl Professional / Qsc / Rcf / Yamaha , Compact 12-Channel Analog Audio Mixing Console Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Multi-Channel Analog Audio Mixing Console Suitable For Live Sound Reinforcement, Studio Recording, Public Address, And Installed Sound Applications, Comprising Not Less Than 12 Input Channels Including A Minimum Of 8 Mono Microphone/Line Input Channels With High-Quality Low-Noise Mic Preamplifiers And +48 V Phantom Power, Together With Additional Stereo Input Channels, Balanced Xlr/Trs Connectivity And Channel Equalization Suitable For Professional Audio Mixing. The Mixer Shall Incorporate Built-In Digital Signal Processing And/Or Effects Processing, Integrated Stereo Usb Audio Interface For Recording And Playback With Computer Connectivity, Usb Media Playback/Recording Capability, And Bluetooth Or Equivalent Wireless Audio Input, Along With Auxiliary Send(S), Main Stereo Outputs With Level Metering, And Headphone/Control-Room Monitoring Facilities. The Unit Shall Feature A Rugged Compact Chassis Suitable For Continuous Professional Use, And Shall Be Supplied Complete With All Required Accessories, Interconnections, Power Supply, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Performance, Reliable Operation, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Compact Mixing Solution Suitable For Stage, Studio, And Installed Environments. Reference Make & Model: Soundcraft Nano M12bt Soundcraft / Yamaha / Behringer / Mackie / Allen & Heath , 24-Channel Rack-Mountable Remote-Controlled Digital Mixer With Usb Multitrack Recording Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Rack-Mountable Digital Audio Mixing Console With Integrated Usb Multitrack Recording Capability, Suitable For Live Sound Reinforcement, Studio Production, Broadcast, And Installed Sound Applications, Comprising Not Less Than 24 Input Channels With High-Quality Microphone Preamplifiers, Balanced Analog And Digital Input Connectivity, And Fully Recallable Digital Signal Processing On All Channels. The System Shall Provide Remote-Control Capability Via Built-In Dual-Band Wi-Fi And/Or Ethernet, Enabling Operation From Multiple Standard Web-Browser-Enabled Devices Across Major Operating Systems Without Dedicated Software, And Shall Support Simultaneous Control From Multiple Devices For Flexible Mixing And Monitoring. The Mixer Shall Incorporate Integrated Professional Signal Processing Including Equalization, Dynamics Control, Feedback Suppression, Delay, And Effects Derived From Established Audio-Processing Platforms, Along With Multitrack Recording Of Input Channels And Stereo Mix Directly To Usb Storage And/Or A Connected Computer, Forming A Complete Recording And Mixing Solution. The Unit Shall Be Housed In A Road-Rugged Rack-Mountable Enclosure Suitable For Stagebox Or Fixed-Installation Deployment, And Shall Provide Multiple Auxiliary Outputs, Main Outputs, Headphone Monitoring, And Computer Audio-Interface Functionality. The Scope Shall Include The Supply Of The Latest Compatible Software/Firmware Version And An Appropriate Control Interface Device (Tablet) Required For Proper Configuration, Remote Operation, And Monitoring Of The System. The Supply Shall Further Include All Necessary Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Reliable Operation, Noise-Free Performance, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Digital Mixing And Recording System. Reference Make & Model: Soundcraft Ui24r Soundcraft / Allen & Heath / Behringer / Yamaha Tablet: Fully Compatible With The Supplied Mixer For Seamless Operation And Control. , Supply, Installation, Testing And Commissioning Of Signal Cable & Interconnectors As Per Requirements. Approved Make Cable: Belden / Canare / Mogami / Amphenol Approved Interconnectors Neutrik,Canare, Belden, Switchcraft, Amphenol, Seetronic, Rean, Hicon, Deltron , 8-Channel Stage Snake Cable With Stage Box Supply, Installation, Testing And Commissioning (Sitc) Of A Professional 8-Channel Audio Multicore (Snake) Cable Assembly With Stage Box, Suitable For Live Sound Reinforcement, Auditorium, Studio, And Installed Pa System Applications. The System Shall Comprise Not Less Than Eight Balanced Low-Noise Microphone/Line Channels Constructed Using High-Purity Copper Conductors With Individually Shielded Twisted Pairs And Overall Protective Shielding, Enclosed In A Flexible, Abrasion-Resistant Outer Jacket Designed For Stage And Fixed-Installation Environments To Ensure Minimal Signal Loss, Low Electromagnetic Interference, And Reliable Long-Term Performance. The Stage End Shall Terminate In A Rugged Metal Stage Box Fitted With Clearly Numbered Professional Xlr Female Input Connectors (Minimum 8 Channels) And Appropriate Strain Relief, While The Console End Shall Provide Matching Xlr Male Fan-Out Connectors Or Multipin Termination Of Suitable Length For Mixer Connectivity. All Connectors Shall Be Professional-Grade With Secure Contact, Proper Grounding, And Mechanical Protection To Maintain Consistent Signal Integrity. The Multicore Assembly Shall Be Of Suitable Length As Required At Site, Properly Laid, Dressed, Labeled, And Tested For Continuity, Insulation Resistance, Shielding Effectiveness, And Noise-Free Operation. The Supply, Installation, Testing And Commissioning Scope Shall Include All Terminations, Routing Accessories, Identification Ferrules, Documentation, Testing, And Commissioning, Forming A Complete And Fully Operational Stage-To-Mixer Signal Interconnection System In Accordance With Approved Technical Specifications And Site Requirements. Approved Make: Belden / Neutrik / Canare / Mogami / Amphenol , 27U Equipment Rack With Power Distribution Unit Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Standard 27U Equipment Rack Enclosure Suitable For Housing Audio, Networking And Control Equipment Associated With The Pa And Av System. The Rack Shall Be Of Robust Steel Construction With Corrosion-Resistant Powder-Coated Finish, Providing Adequate Load-Bearing Capacity, Ventilation Provisions, Cable-Management Access, And Secure Front Door With Locking Arrangement, Along With Removable Side Panels And Appropriate Mounting Rails Conforming To International Rack Standards. The Rack Shall Be Supplied Complete With A Rack-Mountable Power Distribution Unit Providing Multiple Switched And Fused Ac Output Sockets, Proper Earthing/Grounding Arrangement, Overload Protection, And Suitable Input Power Cord, Ensuring Safe And Reliable Power Distribution To All Installed Equipment. The Installation Shall Include All Necessary Mounting Hardware, Blanking Panels, Cable Organizers, Labeling, Earthing Connections, And Internal Power Wiring, And The System Shall Be Properly Assembled, Installed, Tested, And Commissioned To Ensure Mechanical Stability, Electrical Safety, Effective Heat Dissipation, And Reliable Operation In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete And Ready-To-Use Equipment Rack Solution. Approved Makes: Valrack / Netrack / Rittal / Or Equivalent Professional-Grade Manufacturers Meeting Or Exceeding The Specified Technical Parameters. , Microphone Mini Boom Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Microphone Mini Boom Stand Suitable For Stage Performance, Studio Recording, Auditorium, And Installed Sound Applications. The Stand Shall Be Of Robust Metal Construction With Corrosion-Resistant Finish, Incorporating A Stable Weighted Base Or Tripod Base, Height-Adjustable Vertical Shaft, And A Compact Adjustable Boom Arm With Secure Locking Mechanism For Precise Microphone Positioning. The Stand Shall Provide Standard Microphone Mounting Thread Compatibility (3/8? And 5/8? With Suitable Adapter) And Shall Be Capable Of Supporting Typical Dynamic Or Condenser Microphones Without Vibration Or Drift, Ensuring Stable And Noise-Free Operation During Use. The Unit Shall Be Supplied Complete With All Necessary Mounting Accessories, Thread Adapters, Tightening Knobs, And Protective Fittings, And Shall Be Installed, Tested, And Commissioned To Ensure Mechanical Stability, Smooth Adjustment, And Reliable Performance In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Deployable Microphone Stand Solution Suitable For Continuous Professional Use. Approved Makes : Hercules / K&M / On-Stage / Gator / Samson / Ultimate , Supply, Installation, Testing And Commissioning Of Microphone Boom Stand Having Technical Specifation As Item No: 1.16 Approved Makes : Hercules / K&M / On-Stage / Gator / Samson / Ultimate , 16A + 6A Combo Power Distribution Unit (8-Socket) Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Rack-Mountable Or Portable Power Distribution Unit (Pdu) Suitable For Audio-Visual, Pa, And Equipment Rack Applications, Providing A Minimum Of Eight Ac Output Sockets In A 16A + 6A Combination Configuration Compatible With Standard Indian Electrical Systems. The Unit Shall Be Of Robust Metal Construction With Fire-Retardant Insulated Components, Incorporating Individual Or Grouped Switched Outputs, Suitable Internal Wiring, Proper Earthing/Grounding Provision, And Protection Features Such As Overload Protection, Fuse Or Mcb Safeguarding, And Surge Suppression Where Applicable, Ensuring Safe And Reliable Power Delivery To Connected Equipment. The Pdu Shall Be Designed For Continuous Professional Use, With Clearly Labeled Sockets, Secure Input Power Connection Of Appropriate Current Rating, And Compatibility With Standard Rack Or Equipment Mounting Arrangements. Approved Makes : Valrack / Netrack / Rittal / Hager / Legrand / Or Equivalent Professional-Grade Manufacturers Meeting Or Exceeding The Specified Technical Parameters. , Wireless Handheld Vocal Microphone System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wireless Handheld Vocal Microphone System Suitable For Live Sound Reinforcement, Stage Performance, Auditorium And Installed Pa Applications, Comprising A Dynamic Handheld Microphone Capsule With Cardioid Polar Pickup Pattern And Frequency Response Approximately 50 Hz To 15 Khz Optimized For Clear Vocal Reproduction And Effective Feedback Rejection. The System Shall Include A Uhf Or Equivalent Professional Wireless Transmission System With Rack-Mountable Or Desktop Receiver, Stable Rf Performance With Selectable Channels/Frequencies As Permitted By National Regulations, Balanced Audio Output Connectivity, And Provisions For Antenna Diversity Or Equivalent Signal-Stability Technology To Ensure Reliable, Noise-Free Operation. The Handheld Transmitter Shall Feature Rugged Metal Construction, Secure Battery Compartment, Suitable Operating Range For Stage Use, And Compatibility With Standard Rechargeable Or Replaceable Batteries. The Receiver Shall Provide Audio Level Control, Rf/Af Indication, And Necessary Output Interfaces For Connection To Professional Mixing Consoles And Pa Systems. The Unit Shall Be Supplied Complete With Microphone Transmitter, Receiver, Antenna System, Power Supply, Mounting Accessories, Interconnection Cables, Documentation, Installation, Testing, And Commissioning, Ensuring Stable Rf Transmission, Clear Audio Performance, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Wireless Vocal Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 58 Approved Makes Sennheiser / Shure / Sennheiser / Audio-Technica / Akg , Digital Speaker Management System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Digital Loudspeaker Management And System-Processing Unit Suitable For Pa, Auditorium, And Installed Sound Reinforcement Systems, Incorporating Multi-Input And Multi-Output Balanced Analog Audio Channels (Minimum 2 Inputs And 6 Outputs Or Higher) With High-Resolution Digital Signal Processing For Complete System Optimization And Protection. The Processor Shall Provide Configurable Crossover Filtering, Parametric And Graphic Equalization, Delay Alignment, Polarity Control, Dynamic Limiting, And System Protection, Along With Automatic Feedback Suppression, Room Equalization, And Loudspeaker Tuning Functions Derived From Established Professional Audio-Processing Technologies. The Unit Shall Support Front-Panel Control With Display Interface And Remote Configuration Via Computer Or Network Connection, And Shall Include Non-Volatile Memory For Storing Multiple User Presets Suitable For Different System Configurations. Audio Performance Shall Ensure Low Noise, Wide Dynamic Range, And Minimal Distortion, Appropriate For Professional Live And Installed Sound Applications. The Equipment Shall Be Housed In A Standard Rack-Mountable Enclosure Suitable For Continuous Operation, And Shall Be Supplied Complete With Power Supply, Interconnection Accessories, Mounting Hardware, Documentation, Installation, Testing, And Commissioning, Ensuring Reliable Signal Processing, Safe Operation, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Speaker-Management Solution. Reference Make & Model Dbx Drive Rack Venue 360 Approved Makes : Dbx / Xilica / Behringer / Bss Audio , Condenser Pickup Microphone System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Miniature Condenser Pickup Microphone System Suitable For Acoustic Musical Instruments, Stage Performance, Studio Recording, And Installed Sound Applications, Incorporating A Contact-Type Or Surface-Mount Condenser Transducer With Figure-8 (Bi-Directional) Polar Pickup Pattern And Wide Frequency Response Approximately 10 Hz To 18 Khz For Accurate Vibration And Tonal Reproduction. The Microphone Shall Provide High Sensitivity, Low Self-Noise, And Wide Dynamic Range, And Shall Operate On Standard Phantom Power (Approximately 9 V To 52 V Dc) Through An In-Line Or Integrated Preamplifier Module With Balanced Low-Impedance Xlr Output Suitable For Connection To Professional Mixing Consoles And Pa Systems. The System Shall Include Non-Permanent Mounting Provision Such As Adhesive Pad Or Equivalent Detachable Fixing Method To Enable Secure Attachment To Musical Instruments Without Damage, Along With Shielded Connecting Cable, Preamplifier Interface, And Strain-Relief Protection To Ensure Reliable Stage Use. The Unit Shall Be Supplied Complete With Mounting Accessories, Interconnection Components, Protective Storage Provision, Documentation, Installation, Testing, And Commissioning, Ensuring Stable Pickup Performance, Noise-Free Signal Transmission, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Condenser Pickup Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Akg C411pp Approved Make : Akg / Audio-Technica / Shure / Dpa , Direct Injection (Di) Box Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Direct Injection (Di) Box Suitable For Stage, Studio, Auditorium, And Installed Pa Applications, Designed To Convert High-Impedance Unbalanced Instrument Or Line-Level Signals To Balanced Low-Impedance Microphone-Level Output For Direct Connection To Mixing Consoles And Audio Systems. The Unit Shall Provide High-Quality Signal Isolation And Impedance Matching Using Transformer-Based Or Active Electronic Circuitry, Incorporating Balanced Xlr Output, Parallel/Thru Output For Amplifier Feed, Ground-Lift Switch To Eliminate Hum And Noise, And Attenuation Pad Or Level-Control Facility Where Applicable. The Di Box Shall Support Passive Operation Or Active Powering Via Internal Battery And/Or Phantom Power, Ensuring Compatibility With A Wide Range Of Musical Instruments And Audio Sources. Audio Performance Shall Ensure Wide Frequency Response, Low Distortion, High Headroom, And Minimal Noise, Suitable For Professional Live And Recording Environments. The Enclosure Shall Be Of Rugged Metal Construction With Protective Finish, Suitable For Continuous Stage Use, And Shall Be Supplied Complete With Necessary Connectors, Accessories, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Signal Transmission, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Di Interface Solution. Reference Make & Model Akg C411pp Approved Make : Radial / Dbx / Klark Technik / K & M / , Additional Xlr-To-Xlr Microphone Cable (10 M Length) Supply, Installation, Testing And Commissioning (Sitc) Of Professional Balanced Xlr-To-Xlr Microphone Interconnection Cables Of Minimum 10 Metres Length, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cables Shall Be Constructed Using High-Purity Copper Conductors With Twisted-Pair Configuration, Effective Overall Shielding, And Low-Capacitance Insulation To Ensure Minimal Signal Loss, Low Electromagnetic Interference, And Noise-Free Audio Transmission Over The Specified Distance. Each Cable Shall Be Terminated With Professional-Grade 3-Pin Xlr Male And Female Connectors Featuring Secure Locking Mechanism, Proper Grounding, Strain-Relief Protection, And Durable Metal Housing, Ensuring Reliable Connectivity And Long-Term Mechanical Integrity Under Continuous Professional Use. The Outer Jacket Shall Be Flexible, Abrasion-Resistant, And Suitable For Stage Handling And Fixed Installation Environments. The Supply, Installation, Testing And Commissioning Scope Shall Include Supply Of Complete Ready-To-Use Cables, Identification/Labeling, Testing For Continuity, Insulation, Shielding Effectiveness, And Signal Integrity, And Commissioning To Achieve Stable, Hum-Free Operation In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Professional Microphone Interconnection Solution. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Trs To Trs Audio Interconnection Cables Supply, Installation, Testing And Commissioning (Sitc) Of Professional Balanced Trs-To-Trs Audio Interconnection Cables Of Minimum 10 Metres Length Each, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cables Shall Utilize High-Purity Copper Twisted Conductors With Effective Shielding And Low Capacitance, Ensuring Low Noise, Minimal Signal Loss, And Reliable Balanced Audio Transmission Over The Specified Distance. Each Cable Shall Be Terminated With Professional 6.35 Mm Trs (Stereo) Male Connectors Having Durable Metal Housing, Proper Strain Relief, And Secure Electrical Contact, And Provided With A Flexible, Abrasion-Resistant Outer Jacket Suitable For Continuous Professional Use. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Ts To Ts Audio Instrument Cable Supply, Installation, Testing And Commissioning (Sitc) Of Professional Unbalanced Ts-To-Ts Audio/Instrument Interconnection Cable Of Minimum 10 Metres Length, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cable Shall Be Constructed Using High-Purity Copper Conductor With Effective Shielding And Low Capacitance, Ensuring Low Noise Pickup, Minimal Signal Loss, And Reliable Signal Transmission For Instrument Or Line-Level Audio Connections. Each Cable Shall Be Terminated With Professional 6.35 Mm Ts (Mono) Male Connectors Featuring Durable Metal Housing, Secure Electrical Contact, And Proper Strain-Relief Protection, And Provided With A Flexible, Abrasion-Resistant Outer Jacket Suitable For Continuous Professional Use. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Two-Way Loudspeaker With Speaker Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Full-Range Loudspeaker Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Pa System Applications, Incorporating A High-Efficiency 12-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Constant-Directivity Waveguide, Driven By Integrated Class-D Amplification Delivering Not Less Than Approximately 1000 W Peak Power (Or Equivalent Continuous Rating). The Loudspeaker Shall Provide Maximum Sound Pressure Level Of About 130 Db Special Or Higher And Usable Frequency Response Extending Approximately From 50 Hz To 20 Khz, Ensuring Clear, High-Output Full-Range Audio Performance. The Unit Shall Include Balanced Xlr/Trs Combo Input(S), Additional Line/Microphone Input Capability, And Xlr Link/Thru Output, Along With Built-In Digital Signal Processing Providing Equalization, Crossover Management, Dynamic Protection, And Selectable Operating Modes Suitable For Front-Of-House Or Monitor Use. The Enclosure Shall Be Of Rugged, Acoustically Optimized Moulded Or Composite Construction With Integral Handles, Pole-Mount Socket, Monitor-Wedge Angle Provision, And Durable Protective Finish Suitable For Continuous Professional Deployment. The System Shall Be Supplied Complete With A Heavy-Duty Adjustable Tripod Speaker Stand, All Required Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Electrical Safety, Mechanical Stability, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Powered Loudspeaker Solution. Reference Make : Yamaha Dbr Approved Make : Yamaha / Jbl Professional / Rcf Art, Qsc , Stage-Monitor Loudspeaker Supply, Installation, Testing And Commissioning Of A Self-Powered (Active) Two-Way Bi-Amped Bass-Reflex Professional Stage-Monitor Loudspeaker Comprising A 12-Inch Low-Frequency Woofer With Minimum 2.5-Inch Voice Coil And Ferrite Magnet And A 1.75-Inch High-Frequency Compression Driver In Coaxial Configuration, Providing Nominal Coverage Of Approximately 90° Horizontal × 60° Vertical With Fir-X Dsp-Controlled Crossover Around 1.8 Khz. High-Efficiency Class-D Bi-Amplification Delivering Not Less Than 1000 W Dynamic Power (Lf About 800 W And Hf About 200 W) And Approximately 465 W Continuous Output, Capable Of Producing A Maximum Sound Pressure Level Of At Least 129 Db Peak With A Frequency Response Of Approximately 55 Hz To 20 Khz (-10 Db) Or Wider. A Minimum Of Two Balanced Xlr/Trs Combo Mic/Line Inputs, Stereo Rca Input Provision, Balanced Xlr Link/Output, Integrated Dsp Processing And Protection Circuits, Housed In A Rugged Plywood Bass-Reflex Enclosure With Protective Grille, Monitor-Tilt Provision And Pole-Mount Socket, Suitable For Operation On 220-240 V Ac, 50 Hz Supply, Complete With All Necessary Accessories, Cabling, Installation Hardware. Reference Make & Model : Yamaha Dhr Approved Makes Yamaha / Jbl Professional / Rcf Art, Qsc , Analogue Audio Mixing Console Supply, Installation, Testing And Commissioning Of A Professional Analogue Audio Mixing Console With Minimum 16 Input Channels, Comprising At Least 8 Mono Microphone/Line Input Channels With High-Quality Microphone Preamplifiers, Switchable 48 V Phantom Power, Insert Points, High-Pass Filters, And Single-Knob Compressors On Selected Mono Channels, Together With Additional Stereo Line Input Channels To Realize Not Less Than 16 Simultaneous Inputs. The Mixer Shall Provide Balanced Xlr/Trs Connectivity, Multi-Band Channel Equalization With Sweepable Mid-Frequency On Mono Channels, Minimum Four Auxiliary Sends Including Effects Send, Group And Stereo Bus Routing, Peak Indication, And Comprehensive Master Level Metering. The Unit Shall Incorporate A Built-In Digital Multi-Effects Processor With Multiple Preset Programs And An Integrated Usb Audio Interface Supporting At Least 2-In/2-Out Operation With 24-Bit/192 Khz Resolution For Computer Recording And Playback. The Console Shall Be Housed In A Robust Metal Chassis Suitable For Portable Or Fixed Installation, Operate On 220-240 V Ac, 50 Hz Supply, Complete With All Necessary Accessories, Cabling, Installation Hardware. Reference Make: Yamaha Mg16xu Approved Makes : Yamaha, Allen & Heath, Soundcraft, Mackie, Behringer, Presonus, Midas, Studiomaster. , Supply, Installation, And Execution Of All Electrical Wiring Works Required For The Public Address System, Including Equipment Fixing, Speaker Cabling, Projector Cabling, Scaffolding, Carpentry, Fabrication, Conduit Laying, And Associated Civil Works, Complete In All Respects As Per Site Requirements And Directions Of The Universitys Engineer-In-Charge And Calibration, Testing, And Fine-Tuning Of The Installed Public Address System To Ensure Optimal Performance And Sound Quality, Complete In All Respects As Directed By The Universitys Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Kerala View Result →
7.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
8.
Rural Development #10408690 Price Bid
Supply Of Furniture For Wbsrda, Murshidabad Division , Purchaseing Of Furniturfor Wbsrda, Murshidabad Division. , Providing, Supplying And Placing Of Executive Engineer Table. Dimension Of The Table: 1800W X 2100D X 750H Mm. Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. The Product Should Have Iaq Gold, Greenpro, Griha 2019 And Greenguard (By Ul) Certification. , Providing, Supplying And Placing Of Executive Chair (Normal). The Product Should Have Iaq Gold, Greenpro, Griha 2019, Greenguard (By Ul) And Bifma Level-2 Certification. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression.The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). High Back Size: 47.7 Cm. (W) X 76.4 Cm. Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: 360 Revolving Type. Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. Tilt Tension Adjustment Can Be Operated In Seating Position. 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Seat/Back Tilting Ratio Of 1: 2. The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair: Seat Height -43.1-53.1Cm Height -112.7-130.2Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. , Providing, Supplying And Placing Of 3-Seater Sofa Cum Bed. Overall Dimension In Sofa Condition:- Length : 200Cm, Width : 104.5Cm, Height : 97.5Cm, Seat Height : 46.5Cm. In Bed Condition:- Length : 200Cm, Width : 155Cm, Height : 77.5Cm, Seat Height :46.5Cm. This Sofa Cum Bed Has Contemporary Looks And Well-Engineered Functionality, It Gives Value For Money Considering The Spaces It Occupies. This Upholstered Sofa Transforms Into A Bed Easily And Has Ample Storage Space, A Perfect Solution For Everyday Use. The Main Feature It Has Is Premium Comfort Plus A Functional Sofa-Cum-Bed Without Compromising On The Aesthetics. The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Providing, Supplying And Placing Of Working Table L-Shape Of Size Shall Be 1200 Width X 600 Depthx 750 Height.The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc .The Modesty Panel Shall Be 18 Mm Thick Plt. The Modesty Panel Shall Be In A Combination Of Black & White Cedar. Pedestal Size Shall Be390 Width X435 Depthx529 Height.The Top Is 18 Mm Thick Plb . The Two Drawer Mobile Pedestal Is Available In One Size .The Top And Drawer Fronts Shall Be In White Cedar While The Other Components Shall Be In Black. The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Providing, Supplying And Placing Of Tea Table With Glass Top.It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. Pisa Center Table: Understructure: It Is A Welded Assembly Made In Ss202 Grade. Dia. 12±0.04 As Per Is:1762. Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Providing, Supplying And Placing Of Visitors Chair (Stand). Seat/Back Assembly: The Seat Made From 1.2 ±0.1Cm. Thk. Hot Pressed Plywood Measured And Back Should Beinjection Moulded From Black Co-Polymer Polypropylene Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. Seat Size: 45.0Cm(W) X 42.0Cm.(D). Back Size: 39.0Cm(W) X 38.0Cm.(H). Seat / Back Covers: The Seat And Back Covers Should Beinjection Moulded In Black Co-Polymer Polypropylene. High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 +/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrest Assembly : The Armrests Should Bemade Of Black Integral Skin Polyurethane Wtih 50-70 Shore A Hardness And Reinforced With M.S. Insert. The P.U. Armrests Should Bethen Fixed To Black Powder-Coated ( Oft 40-60 Microns ) Armrest Brackets Made Of Of 0.5 ± 0.05 Cm. Thk. Hr Steel And Fitted With Claddings Made Of Injection Moulded Polypropylene. Fixed Type Mechanism: The Fixed Type Mechanism Should Bewithout Back Tilt. Tubular Frame: The Tubular Frame Should Bemade Up Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns). Overall Dimensions Of Chair: Seat Height -49.5Cm. Height -88.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm. The Product Should Have Greenguard (By Ul) Certification. , Providing, Supplying And Placing Of Steel Almirah Which Shall Have An Overall Size Of916mm(W)X486mm(D)X1981mm(H) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Product Should Have Iaq Gold, Greenpro, Griha, Greenguard (By Ul) Certification. , Supply, Fitting & Fixing Of Open Type Multiflex Rack As Per The Below-Mentioned Dimension. 1. Height – 2400 Mm 2. Width- 1200 Mm 3. Depth- 448 Mm 4. No Of Panels- 6 (Customised Item) The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Computer Table: Supplying And Placing In Position Office Table Of The Following Specifications. Its Size Shall Be1200 X 600 X 750.Table Material - The Table Panels Are Made From 18 ±0.5Mm Thk Pre-Laminatedexterior Grade Plt ( Grade I,Type-Ii )(Is 12823) With Pvc Edgebanding On All Sides............. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 Is Mandatory. The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Over Cabinet With Metal Shutter: Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1No Main And4 Nos Add-On Unit Type Of Construction With ..............The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Over Cabinet With Metal Shutter:: Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1Nomain And5 Nos Add-On Unit Type Of Construction.............The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Over Cabinet With Metal Shutter Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1 No Main And5 Nos Add-On Unit Type Of Construction ............The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. : , Over Cabinet With Metal Shutter: Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1 No Main And20 Nos Add-On Unit Type Of Construction ........... The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Metal Shelving Racks:Supplying And Placing Of Storage Open Shelf Product Size - 5400(W) X 450(D) X 1950*(H) (Height Of Leveler Is 50Mm And Adjustment Possible Should Be ................The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Cable Cubby With Hdmi/Usb Port:Sitc Of Diagonal Size 85,Panel Type 60Hz New Edge, Resolution 3,840 X 2,160 (Landscape) ,Brightness 350 (Without Glass), 220 (With Glass), Contrast Ratio 4000:1 (Typ.), Viewing Angle(H/V) 178:178,Response Time 6 Ms, Display Colors 16.7, Color Gamut 92%, Dynamic C/R Mega,Audio Built In Speaker(10W X4), Input Type Hdmi 2(Rear 1, Front 1), Dp 1, Usb C(Front), Ops I/F, 2(For Soc, Rear/Front), 1 (For External 3.0X1(Front)), Output Type (Basic) Touch Out 1 (Usb Upstream Type),(With Tray) Touch Out 1, No. Of Drawing 20 Touch (Internal/External), * Whiteboarding App Works 4 Drawing, Drawing Speed(Touch Latency) 26Ms, Duty Cycle 16/7, Special Features Ag Flim(Anti Glare),Hydrophobic Coated Pet (Shatter-Proof Flim) Antimicrobial Coating, Touch Module(Ir), , Wifi/Bt Module Embedded, Built In Speaker(40W 4Ch),External Control Touch Input,Rs232c Thru Stereo Jack, Rj45(For Mdc). Safety Ce, Ul & Bis.Approved Make: NecSonySamsung , Mount For Display: Sitc Of Mount For Display. , 4X2 4K/60 Hdmi With 2 Audio Outputs:Sitc Of 4 X 2Hdmi Matrix Switcher With Audio De-Embedding, As Per Specifications..4 X 2Hdmi Matrix Switcher With Audio De-Embedding Which Supports Computer And Video Resolutions Up To 4K/60 @ 4:4:4 , ............... Parity, Defaults: 9600 Baud, 8 Data Bits, 1 Stop Bit, No Parity; Should Support Ethernet Protocol : Arp, Dhcp, Dns, Http, Https, Icmp (Ping), Ieee 802.1X, Ntp, Sftp, Smtp, Snmp, Ssh, Tcp/Ip, Telnet, Udp/Ip Approved Makes: Extron/ Dexon/ Fsr , Ptz Cameras:Sitc Of Full Hd Ptz Camera, Sensor 1/2.8 2.41Mp Cmos, Video Format Hdmi:1080P 60 / 50 Fps,720P 60 / 50 Fps,Usb:1080P 30 / 25 Fps, 720P 30 / 25 Fps, Video Output (Hd) Interface Hdmi / Usb 3.0, Optical Zoom 12X, Digital Zoom 12X (Hdmi Only), Viewing Angle 72°(H) 80°(D), Panning Angle +100° ~ -100°,Panning Speed 100°/ Sec,Tilting Angle +30° ~ -30°, Tilting Speed 100°/ Sec,Aperture F1.6~F2.8,Focal Length F = 3.92 ~ 47.32 Mm,Shutter Speed 1/1 ~ 1/10,000 Sec, Minimum Object,Distance 500Mm (Wide) ~ 1500Mm (Tele),Video S/N Ratio > 50Db,Minimum Illumination 1.6 Lux (F1.8, 50Ire, 60Fps), Focus System Auto / Manual, Gain Control Auto / Manual, White Balance Auto / One-Push / Manual, Exposure Control Auto / Manual, Wdr Yes, 3D Nr Yes, Image Flip Yes, Preset Positions 128, Control Interface Rs-232 In And Out / Usb, Control Protocol Visca / Uvc, Video Stream Yuv422 / Mjpeg, Ir Pass-Through Yes, Ir Receiver Yes, Ir Remote Control Yes, Power Consumption < 13W.Approved Make: Lumens/Sony/Panasonic. , Wall/Ceilingmount For Above Camera: Sitc Of Wall/Ceilingmount For Above Camera , Cable Cubby With Hdmi/Usb Port: Sitc Of Cable Cubby With Hdmi/Usb Port , Hdmi Transmitter:Sitc Of Hdmi Transmitter Transmitting Hdmi Plus Control And Analog Audio Up To 230 Feet (70 Meters) Over Twisted Pair; Supports Computer And Video Resolutions Up To 4K ; Supports Data Rates Up To 10.2 Gbps, Deep Color Up To 12-Bit, 3D, Hd Lossless Audio Formats, And Cec Pass-Through ; Hdcp 2.3 Compliant; Supports Up To 4:4:4 Chroma Sampling; Should Support Maximum Pixel Clock 300 Mhz; Should Support Audio Gain Unbalanced Output: 0 Db; Balanced Output +6 Db, Frequency Response 20 Hz To 20 Khz, ±0.5 Db , Thd + Noise 0.03% @ 20 Hz To 20 Khz At Maximum Output , S/N >90 Db, At Maximum Output (15 Dbu), Balanced (Unweighted) , Stereo Channel Separation >80 Db @ 1 Khz To 20 Khztput Displays.Approved Makes: Extron/ Dexon/ Fsr , Cable Cubby With Hdmi/Usb Port: Sitc Of Twisted Pair Receiver Which Receives Hdmi Plus Control And Analog Audio Up To 230 Feet (70 Meters) Over Twisted Pair; Support Computer And Video Resolutions Up To 4K, Data Rates Up To 10.2 Gbps Or Better And Cec Pass-Through; Hdcp 2.3 Compliant; Edid Management; Support Up To 4:4:4 Chroma Sampling; Should Support Maximum Pixel Clock Of At Least 300 Mhz; Should Support Audio Gain Of Unbalanced Output: 0 Db; Balanced Output +6 Db, Frequency Response Of 20 Hz To 20 Khz, ±0.5 Db, Thd + Noise Of 0.03% @ 20 Hz To 20 Khz At Maximum Output, S/N Of >90 Db, At Maximum Output (15 Dbu), Balanced, Stereo Channel Separation : >80 Db @ 1 Khz To 20 Khz.Approved Makes: Extron/ Dexon/ Fsr , Hdmi And Audio To Usb Scaling Bridge: Sitc Of Hdmi To Usb Converter.Approved Make: Inogeni/Extron/Fsr , Hdmi Cable 25 Ft: Sitc Of Hdmi Cable 25 Ft , Hdmi Patch Cable: Sitc Of Hdmi Patch Cable 6 Ft.Approved Make: Extron/Klotz/Nt , Usb Cable-10 Mtr: Sitc Of Usb Patch Cable 10 Meter.Approved Make: Extron/Klotz/Nt , Usb Cable: Sitc Of Usb Patch Cable 1.8 Meter.Approved Make: Extron/Klotz/Nt , Wired Gooseneck Microphone With Base: Sitc Of 18Goosenecklengthwithdualflexdesign,Shouldoperatewithinthefrequencyrangeof30hz-18Khz Or Better, Elementwithbackelectret-Condenser, Polar Pattern With Cardioid,Lowfrequencyroll-Of With 180Hz,12Db/ Octave,Impedancewith250?±30%(At1000hz),Opencircuitsensitivitywith-57Db±3Db (0Db=1V/Microbar 1000Hz Indicated By Open Circuit,Maximum Input Sound Level With 115Dbspl,1Khzat1%T.H.D.,Dynamic Range With82db1khzatmaxspl,Signal-To-Noise Ratio With 61Db 1Khz At 1Pa, Operating Voltage With Phantom Power11–52Vdc,2Matypical,Switchwithflat,Roll-Off 10Db Pad(Nominal). Should Be Supplied With Base Having On/Offswitch Etc. , Single Ch Wireless Microphone With Handhed Wireless Microphone: Sitc Of Wireless Handheld Microphone With Built In Afs(Automatic Frequency Selection) Technology, Uhf Operating Mode With Frequency Range Of 522 -930Mhz, Should Have Operating Bandwidth 134 Mhz Or Better, Anti Interference Technology Ensures Noiselock Squelch Effectively Blocks Stray Rf Or Better, Microphone Frequency Response Of 45Hz To 18Khz Or Better, Should Have Signal To Noise Ratio Less Then 104Db Or Better, Rf Output Power Of 10/40Mw Or Better, Should Have Maximum 24 Set Can Be Used Simultaneously By Using Multiple Frequency Bands In One Venue, Should Have Die Cast Metal Body, Microphone Element Dynamic Or Better Complete Etc. , Dsp Audio Processor With Acoustic Echo Cancellation, Afc, Agc,8Ch Gpio& Us: Sitc Of Digital Signal Processor With Min. 04Aec Enabled Mic/Line Inputs, 04 Line Outputs Or Better , Input Channel Processing Should Include Pre Amplifier, Signal Generator, Expander, Compressor, 10 Band Parametric Eq Or Better, Output Channel Processing Should Include 31 Band Graphic Equalizer, Delay, Crossover, Limiter Or Better, Other Features Should Include Automatic Mixing Console, Ducker, Feedback Elimination, Noise Elimination, Echo Elimination Or Better, Should Have Built-In Bi Directional Usb For Software Based Vc As Well As For Playing Digital Audio, Should Have Built In Camera Tracking Module, 8 Port Freely Configurable Gpio Or Better With Analog/Digital Dynamic Range Of 114Db Or Better, Sampling Rate Of 48Khz Or Better, Frequency Response Of 20Hz – 20Khz Or Better, Per Channel Phantom Power Module Or Better. Should Be Configurable Thru Software. , Amplifier: Sitc Of Amplifier Having 4X150w @4Ohm Power Or Better, It Should Be 4 Channel Class D Amplifier With Volume Knobs On Each Channel Or Better, W/Ch@8Ohm 90W Or Better, W/Ch@4Ohm 150W Or Better, W/Ch@2Ohm 230W Or Better, W Bridge @ 8Ohm 310W Or Better, W Bridge @ 4 Ohm 400W Or Better, Frequency Range : 20Hz – 20Khz Or Better, Thd + N <0.1% Or Better , S/R Ratio >96Db Or Better, Gain 28Db Or Better , Input Sensitivity 2.21Dbu Or Better, Should Have The Following Protections : Mute On/Off, Dc, Internal Fuse. , Wall Mount Speaker:Sitc Of Wall Mount Loudspeaker Having Low Impedance Power Of Min 40 W Or Better @ 8 Ohm, & 16W Or Better @70/100V. Nominal Impedance Of 8 Ohm Or Better Lf Transducer 5 Woofer Or Better, Hf Transducer 0.5 Tweeter Or Better, Should Have Sensitivity (1W @ 1M) Of 90 Db Or Better, Spl Max 106 Db Or Better With Frequency Range Of 94Hz - 20 Khz Or Better. , Speaker Cable 14 Awg : Sitc Ofmulti-Conductor - High-Conductivity Copper Speaker Cable, Twisted Jacketed Connector, 14 Awg Stranded (42X30) Tinned Copper Conductors, Pvc Insulation, Pvc Jacket., Operating Temperature Range : -20°C To +90°C Or Better , Nec/(Ul) Specification:Cl3 Or Better , Awm Specification : Ul Style 2587 (600 V 90°C) Or Better , Csa Specification : Fas90 Or Better, Eu Directive 2011/65/Eu (Rohs Ii) Compliant Or Better, Eu Rohs Compliance Or Better, Approved Makes : Belden , Klotz , Eurocable. , Microphone Cable: Sitc Of Microphone Cable , Audio Sterio / Control Cable: Sitc Of22 Awg Stranded (7X30 ) Stereo Audio / Control Cable Or Better ,High-Conductivity Tinned Copper Conductors Or Better , Polypropylene Insulation Or Better , Should Have Pvc Jacket, Operating Temperature Range: -20°C To +75°C Or Better , Eu Directive 2011/65/Eu (Rohs Ii) Compliant Or Better ,Non Plenum , Approved Makes : Belden , Extron , Eurocable. , Shielded Cat6 Cable: Sitc Of Shielded Twisted Pair Cable Engineered For Optimum Signal Transmission Between Devices Transmitting And Receiving Signal Over Twisted Pair; The Cable Is Certified To 475 Mhz Bandwidth At Distances Up To 330 Feet (100 Meters) And Has Been Independently Tested And Verified To Meet Performance Requirements Set By The Hdbaset Alliance; The Cable Should Be Engineered And Tested To Exceed Hdmi Error Rate Specifications Of Less Than One Pixel Per Billion At 100 Meters; Should Provide Protection From Outside Interference And Ensures High Quality Signal Transmission; Should Have Sf/Utp Design With Four Unshielded 24 Awg Twisted Pair Conductors Inside An Overall Braid And Foil Shield.Approved Makes:-,Extron,Christie, Rgb. , Xtp Dtp 24 Plug, Package Of 10: Sitc Of Plug Should Be Provided With Shielded Twisted Pair For Devices Transmitting And Receiving Signal Over Twisted Pair; Should Be High Performance Category 6A Rj-45 Plug, Metal Strain Relief And Ground Bonding,Suitable For High Emi/Rfi Environments, Should Be Compatible With Tia/Eia 568A/B Wiring Standards, Conductor Alignment Guide Should Reduce Crosstalk And Signal Interference, Should Have Gold Plated Contacts. Approved Makes:-,Extron,Christie, Rgb. , Standard Av Rack With 600Mm Width, 800 Mm Outer Depth And 17U Height : Sitc Of 12U Av Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure Across The X, Y & Z Axis To Give An Uninstruct Bolting Mechanism ( Ul ) And Further Reinforced With 8 Nos. Of Corner Bracket Which Ensure Better Stability And Strength,Multi Hollow Extruded Aluminum Frames Structure Across The X, Y & Z Axis To Give An Uninstruct Bolting Mechanism ( Ul ) And Further Reinforced With 8 Nos. Of Corner Bracket Which Ensure Better Stability And Strength,,Top Cover Ventilated On All Sides Along The Width And Depth Thereby Enhancing Exhaust Of Hot Air,Cable Entry Provision Is Both At The Top And Bottom Covers With 35Mm Round Cable Entry Point, The Cable Entry Provision Comprising Of A Gland Plate With Cable Entry Points In Round Cut Outs Edge Protected With Rubber Grommets,Castor – 4 Nos. Of Heavy Duty Castors To Take Care Of Heavy Load Bearing Capacities Are Provided, Earthing Strip – Copper Strip To Take Care .Oem Authorization Format(Tender Specific) To Be Attached For Authenticityof The Grounding,Approved Make:Nt/Valrack/Wq , Delivery, Installation, Commissioning ,Programming , User Training,Schematics Charges: Delivery, Installation, Commissioning ,Programming , User Training,Schematics Charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
9.
Educational and Research Institute #10372706 Price Bid
Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Procurement Of Equipment Related To Laboratories And Workshops Of Mechanical Electrical Civil Chemical Engineering And Science Humanities Departments Of Hooghly Institute Of Technology Hooghly-Strain Gauge Trainer Kit - Gauge Factor : 2.1 Maximum Bearable Weight : 500 Gm, Cantilever Material : Stainless Steel, Bridge Configuration : Full Bridge Display : 3½ Or 4 Digit Ledwith User Manual 2 Measurement Of Temperature Using Thermocouple, Rtd, Thermistor, Ad950 - Transducers With Electronic Instrumentation Transducers : Thermocouple ( K - Type ) , Thermocouple ( J - Type ) , Thermistor ( Ntc ) , Rtd ( Pt 100 ) , Semiconductor Sensor ( Lm 335 ) And Semiconductor Sensor ( Ad 590 ) With User Manual 3 Bourdon Tube Type Pressure Gauge - Bourdon Tube Type Pressure Gauge, Pressure Range Upto 10, 000 Psi, Accuracy Upto + / -0.25%, With Pumping System 4 Flow Control System Using Mass Flow Meter, Single Loop Controller And Control Valve - Set Up Should Consist Of ---Mass Flow Meter, Single Loop Controller, Control Valve ( Glove ) , Transmitter Should Be Installed At The Upstream Of Control Valve, Controlling Facility By Controller, Continuous Water Recycling Facility, Table Mounted Set Up Preferable With User Manual 5 A / D & D / A Converter Trainer Kit - Analog To Digital Converter • 8-Bit Descrete Adc • On-Board Signal Generator With Adjustable Amplitude Levels • On-Board Led Bank To Observe Digital Outputs • Power Supply : +5V, ±12V Gnd • Interconnection Is Provided By 2Mm Connectors • Experimental Manual Digital To Analog Converter • 8-Bit Binary Weighted Resistors Dac • 8-Bit Ladder Type D To A Converter • Onboard Switches Are Provided For Digital Pattern Generation • 8-Bit Digital Inputs Ranges From 00 To Ff • Extensive Experimental Manual Is Provided With The Kit 6 8051 Based Advanced Microcontrollertrainer - 8051 Microcontroller Trainer Kit;Based On Intels 8051 Microcontroller 12Mhz With • On Board Power Supply • Rechargeable Ni-Cd Battery • Ascii Keyboard Interface • Programming Interface With Pc • Compiler And Cross Assemblers For Programming In C, • Lcd Display, 8051 Usb Programmer, 16*2 Lcd, Light Sensor Module ( Ldr ) , Tsop Sensor Module, 4*4 Matrix Keypad, Aa 6 Cell Holder, Burge Strip F-F Connectors, • 32 K Or Higheruser Ram. ( Expandable ) • Serial I / O Through 8251 Usart • Parallel I / O Lines Available Through Two 8255 Chips • 3 Channels Of 16 Bit Timer / Counters From 8253. 8254 • Adc & Dac Interface Module • Stepper Motor Interface • Square, Triangular, Staircase Wave Generator Interface Module • Dc Voltage, Current Measurement Interface Module • Zero Crossing Detectors Interface Module • Users’ Guide • Cd - Required Software, Usb Cable, Microcontroller & Its Interfacing Book With Application Projects, Cd - Required Software 7 Microcontroller Development Kit - 8051 Development Kit With Accessories And Software 8 Solar Photovoltaic Cell Characteristics Trainer Kit - 12V Solar Module With Suitable Arrangement Of Halogen Lamps 500W, Digital Dc Voltmeter And Ammeter, Lux Meter And Variable Resistive Loadwith User Manual 9 Flux Meter ( Magnetic ) - Integrating Type Digital Fluxmeter, With 3&Half Digit Digital Display, 4- Ranges Of Measurements Indicating Flux Values From 0.1 Kmt ( Kilo Maxwell Turns ) To 2*105 Kmt 10 Digital Storage Oscilloscope ( 70 Mhz ) Detailed Technical Specifications:- A ) No. Of Channels : 2 Or 4 B ) Bandwidth : 70 Mhz C ) Maximum Input : 400 V ( Peak ) D ) Sample Rate : 2 Gsa / Sec E ) Waveform Update Rate : 400 Waveforms / Sec F ) Memory Depth : 100 Kpts Standard ( Upgradable ) G ) Time Base : 5Nsec / Div. To 50 Sec. / Div H ) Waveform Update Rate: 50, 000 Waveforms / Sec I ) Display : 8.5 Inch Colour Wvga J ) Trigger Modes : Force, Edge, And Video, Pulse Width. K ) Built In Interface : Standard Usb 2.0 High Speed Device 11 Lcr Q Meter - Measuring Inductance ( L ) , Capacitance ( C ) , Resistance ( R ) , Quality Factor ( Q ) And Dissipation Factor ( D ) . With A Basic Accuracy Of 0.25% And Five Digit Display Resolution. 12 Diode And Zener Diode Characteristics Trainer - A Complete System To Study The Diode Characteristics Forward And Reverse Characteristics Experiment Can Be Performed On This Trainer Kit Silicon, Zener And Germanium Diode Are Provided With This System. Inbuilt Ammeter And Voltmeter. Digital Display For Displaying Voltage And Current. Different Test Points With User Manual 13 Experimental Kit For Input / Output Characteristics Of Bjt- One Fixed 12V Power Supply, One Variable Constant Voltage Source And One Constant Current Source For Output Characteristic Of The Transistor. Three Digital Meters On The Panel. One Fixed Frequency Of 1Khz With Variable Amplitude , Bread Board With User Manual 14 Training Kit To Study Of Opamp Characteristics - Specification: 2 No. Variable Dc Power Supply 0-3V / 30Ma, 1 No. Fixed Dc Power Supply 12V1 No. Operational Amplifier Ic 741 & Different Types Of Resistance, Capacitors And One Potentiometer With User Manual 15 Training Kit To Study Of Universal Logic Gates & Applications With Power Supply - • On Panel Gates : 4 Nand Gates ( 7400 ) , 4 Nor Gates ( 7402 ) , 4 And Gates ( 7408 ) , 4 Or Gates ( 7432 ) & 6 Not Gates ( 7404 ) • 5 Nos Of Extra 18 Pin Ic Base Mounted On Panel To Use Different Ics • 5 Logic Input Switches With Led • 5 Logic Output Led • On Panel 5 Sockets Each For +5 V & Gnd • Required Numbers Of Patch With User Manual 16 Training Kit For Study Of Kirchhoff’S Current & Voltage Law- Equipped With Necessary Resistors, Digital Voltmeters, Ammeter And Inbuilt Variable Power Supply 5V & 12V.On Board Test Points To Observe Signals, On Board Schematic Diagram, With User Manual 17 Analog Wattmeter - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Dynamometer Type Wattmeters I ) 5-10A, 150-300-600V, Ii ) 10-20A, 150-300-600V. 18 Series Parallel Resonance Of R-L-C Ckt - Kit For Series Parallel Resonance Of R-L-C Ckt: The Set-Up Consist Of Power Supply, Audio Oscillator With Digital Readout, Digital Rms Meters And Different Number Of Inductors ( Smoothly Variable ) , Capacitors, Potentiometer, Ammeter & Voltmeters With User Manual 19 Power Factor Meter ( Single Phase ) - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Power Factor Meter- Dynamometer Type Power Factor Meter , 1 Phase , Current Coil Range : 2.5 & 5.0 Amps. ( Dual Range ) , Pressure Coil Range: 150, 300 Volts ( Double Range ) . 20 Power Supply:Dc - • 2X30v-3A, 5V-3A • Constant Voltage & Constant Current Operation • Digital Displays For Voltage & Current • Adjustable Current Limiter • Protection Against Overload & Short Circuit 21 Training Kit For Verification Of A ) Superposition Theorem. B ) Thevenin’S Theorem. C ) Norton’S Theorem. D ) Maximum Power Transfer Theorem. Two Nos. Variable Dc Power Supply. Two Nos. Resistive Potentiometer ( Pot ) . Differnt Values Sets Of Resistances. Digital Dc Voltmeter, Dc Ammeter, Complete Operating Manual, Connecting Wires , Patch Cords, Etc. 22 Ac Distributor Simulator - Transmission Line Trainer Consist Of:- 100 Km X 3 Phase Tx Line Block At The End Of Each Block Short Is Possible All Digital Multifunctional Meters At The Sending & Receiving End, Loading Provision For Total 1Kva – Load Of Variable Separate Inductive, Capacitive & Resistive Load Bank. High Quality Patch Cord And User Manual. 23 Lux Meter - Sensitivity – 1 - 50, 000 Lux Error Percentage + 5%, 4 ½ Digit To 5 ½ Digit Detail Operating Manual Also To Be Supplied 24 Dielectric Strength Test Setup For Transformer Oil - Transformer Oil: Breakdown Voltage : 0-60Kv, Vertical Panel Mounted With Voltmeter, Glass Cover Encapsulated, Test Cup And Gap Measuring Gauge With 10 Liter Of Transformer Oil 25 Digital Insulation Tester , Digital Insulation Tester: 500V, 200Mohm, Portable Type 26 Half Wave & Full Wave Bridge Rectifier Trainer Kit, 1 / 2 Wave, Fullwave ( Centre Tapped & Bridge ) With Filter Ckt With User Manual 27 Experimental Kit For Characteristics Of Zener Diode, Complete Set Should Consist Of All Accessories To Perform The Experiment Using A Zener Diode Fitted On The Printed Boardwith User Manual 28 Experimental Kit For Input / Output Characteristics Of Bjt, Transistor Trainer Kit Consists Of One Fixed 12V Power Supply, Variable Constant Voltage Source And Constant Current Source For Output Characteristic Of The Transistor.Digital Meters On The Panelwith User Manual 29 Experimental Setup For Implementation Of Adder & Subtractor, With Adder ( Half & Full ) & Subtractor ( Half & Full ) Using Basic Gates. Must Have Onboard Input Supply, Display To Show Logic Outputwith User Manual 30 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer With Power Supply, Display Unit, Patch Cords, Necessary Ic And Manuals For Each. 31 A / D & D / A Converter Trainer Kit 8 Bit With Accessories And Manual. 32 Scr Single Phase Half Wave, Full Wave, Fully Controlled Bridge Rectifier / Converter With In-Built Meters And On-Board Power Supplywith User Manual 33 Training Kit For Study Of Vi Characteristic Of Scr, Igbt , With Separate Section For Scr And Igbt Characteristics With In-Built Meters And Led Indicationswith User Manual 34 Scr Firing Circuit, Power Requirement: 230 Vac +10%, 50Hzstandard Accessories:6 Volt / 1 / 4 W Lamp, Patch Chords & Instruction Manual 35 Training Kit For Study Of Vi Characteristic Of Diac, With Proper Heat Sink And Training Manual.Consists Of One No. Diac With Proper Heat Sink.All Components Should Mount On A Screen Printed Pcb Fixed On Acabinets 36 Scr Commutation Circuit, Scr Commutation Circuit Commutation Techniques Used . I ) Class A Ii ) Class B Iii ) Class C Iv ) Class D V ) Class E Vi ) Class F • In Built Ic Based Dc Regulated Fixed Power Supply +12Vdc & Acwith User Manual 37 Electronic Energy Meter, A.C. Single Phase, 2 Wire Solid State ( Static ) Fully Electronic Energy Meter, Accuracy Class 1.0 & Current Rating 5-30 Amp. With Backlit Lcd Display For 240 Volt System Fitted With Pilfer Proof Meter Box. 38 Trainer Kit For Measurement Of Medium Resistance By Wheat Stone Bridgekit Must Have Inbuilt Power Supply, Measurement Range 1 Ohm – 100 Ohm, Having Sensitive Galvanometer With User Manual 39 Trainer Kit For Measurement Of Low Resistance By Kelvins Double Bridge, With Power Supply, Range 1 Microohm -1 Kiloohm, Having Sensitive Galvanometerwith User Manual 40 Earth Tester, Insulation Reslstance Test: More Than 25 Megohms At 500 V Dc Between Electrical Circuit & Containing Case, Display: Led Or Lcd. Dual Ranges: 0 - 10 - 1000 Ohm ( B ) 0 - 5 - 500 Ohm 41 Trainer Kit For Measurement Of Inductance By Anderson Bridgekit Must Have Built In Power Supply, Inbuilt Signal Source, Application Bridge On Screen Printed Front Panel Display, Set Of Unknown Inductance Coil, Variable Resistance, Set Of Capacitance, Audio Null Detector, Patch Cords, Connecting Wires And Head Phone, Complete Operating Manual. 42 Trainer Kit For Measurement Of Capacitance By Schering Bridge Kit Must Have Input Supply 50 Hz Sine Wave, Two Ratio Dial P & Q, Each Having 1, 10, 100, 100 Ohm Coil, 3 Decade Dial, X 0.001 Microfarad, 0.01 Microfarad, 0.1 Microfarad. Having Sensitive Head Phonewith User Manual 43 Tri-Vector Meter 3Ph 4 Wire Lt Ct & 3Ph 3 / 4 Wire Ht Ct / Pt Operated Fully Static Amr Compatible Tri-Vector Energy Meters Dlms Compliant – Category C 44 Trainer Kit For Measurement Oflinear Displacement Bylinear Variable Differential Transformer ( Lvdt ) For Linear Displacement, Type: Spring Loaded Core Type, Configuration: Axial Type Lvdt Full, Actual Displacement: By Micrometer Arrangement Pitch: 1 Mm, Circuit: Ac Excitation Source, Phase Detector & Digital Display, Excitation Source: Sine Wave Of 2 Khz To 5 Khz Variable Frequency And 0 To 5 Or 12V Variable Amplitude, Readout: Digital Display To Measure 0 To + / - 10 Mm, Indicating, Displacement In Millimeters With Core In / Out Indicated By + Sign, Test Points: Instruction Manual 45 Measure Pressure Using Pressure Sensor Kit.Resistive Pressure Transducer With Pressure Of 0-300Mm Hg / 6Psi, Primary Excitation Voltage Of 5V Dc On Board Provided. On-Board 41 / 2 Digital Panel Meter Provided Using Ad7135. Pressure Generation And Monitor Using A Pressure Gauge. Onboard Instrumentation Amplifier Provided With User Manual. 46 Trainer Kit For Op-Amp As Inverter, Non-Inverting Modefront Panel Built With High Class Insulated Printed Circuit Board Sheet With Well Printed Circuits And Symbols. Fuse For Short Circuit Protection. Patch Cords. The Trainer Is Housed In Abs Plastic / Wooden Cabinet.Size Of The Trainer Set 12”X8”. Instruction Manual. 47 Trainer Kit For Op-Amp As Adder, Differentiator And Integrator Instrument Comprises Of Two Dc Regulated Power Supply 0-5V Dc, ±15V Dc, One Meters To Measure Input And Output Voltage & Combination Of Resistance, Capacitors Mounted On Front Panelwith User Manual 48 Convert Digital Data Into Analog Data By Using Analog To Digital Converters And Analog Data Into Digital Data By Digital To Analog Converter Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden Box, Proper Patch Cord With User Mannual.Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden / Metal Enclosure 49 Simulate Differential Protection Scheme For Transformer With Power System Simulation Kit-3-Phase, 415V, 50Hz, Ac Supply. Control Supply : 1-Phase, 230V, 50Hz, Ac Supply. Short Circuit Protection : Hrc Fuses & Mcb. 3-Phase, 3Kva, 415 / 240V, Delta / Star Connected Transformer With Tapings Primary : 0-10-20-100% Secondary - 0-10-20-100% On Each Phase Of Windings, Natural Air Cooled. • Protection Cts : Primary Side Cts 10 / 1A, 5 Va, Cl-1, Wound Primary Typesecondary Side Cts 20 / 0.67A, 5Va, Wound Primary Type. • Fault Simulating Switches : 32A, 2-Pole, On / Off Rotary Switches Are Provided For Creating A ) Line To Ground Fault, B ) Line To Line Fault, C ) Inter-Turn Faultprotective Relays. % Differential Relay Static Type-With Minimum Basic Setting Biased Feature 10%, 20%, 30%, 40%, 50% Setting For Current. Ct Rated 1A Definite Time Over Current Relay • Earth Fault Relay • Aux. Supply To Relay : 110 / 220 V Ac / Dc Educational Bench Model With Schematic Diagram Of The Test Circuit Printed On The Model Test Points & Measurement Points Brought Out & Connected To Terminals, Circuit Setup For Testing Through Interconnections Of Patch Chords With User Manual 50 D.C. Compound Motor ( Open Type ) - 2 Hp- Dc Compound Motor: 2H.P. 1500Rpm, 230V, Open Type For Assemble And Dismantling Of Different Parts Of Stator And Rotor, Commutator, Brush Etc. 51 D. C. Shunt Generator- For O.C.C. Test-Dc Motor:- 2Hp, 1500 Rpm., 220V Dc Generator:- 1Kw, 1500 Rpm, 220V. Necessary Panel To Set Up With Foundation, Voltmeter:0-300V, Ammeter: 0-5A, Ammeter:0-1A, 4-Point Dc Starter. 52 Dc Motor Speed Control System With Power Supply & Motor-Motor 0.5 Hp, Variable Dc ( 0-230V ) Source, Built In Techogenerator, Digital Panel Meter, Power Circuits Of 4 Scrs ( 1200V., 25 A ) I.E. Half Bridge, Facilities Of Studying Torque Speed Characteristics Of Dc Motor, Torque Measurement, Rpm Indicatorwith User Manual 53 Swinburns Test To Compute Efficiency Of Shunt Generator, 1Hp, 220V, 1500Rpm-D.C. Motor:- 2 Hp, 230V, 1500Rpm, Shunt Field. Suitable Panel Withvoltmeter ( 0-300V ) , And Ammeter: 0-1A, Ammeter:0-5A With User Manual & Proper Setup With Foundation 54 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test- Transformer: 1 Kva, 230 / 115V, Variac: 0-270V, Panel With Voltmeter: ( 0-50V ) , Voltmeter ( 0-300V ) , Ammeter: 0 -2A, Ammeter:0-10A, Wattmeter: 0-1200W. 55 Compute The Efficiency Of A Single Phase Transformer By Back To Back Test- Complete Set Upwith User Manual: Ac Power Supply 0-230V At 4A ( Optional ) • Operated On Mains Power 230V, 50Hz +10% Digital / Analog Meters: • Voltmeter 2 Nos. ( For Primary And Secondary ) • Ammeter 2Nos. ( For Primary And Secondary ) • Digital Wattmeter 2Nos. 56 Parallel Operation Of Two Single Phase Transformers To Determine The Sharing Of Load Current, Apparent Power And Real Power- Transformer ( 2 Numbers ) : 1 Kva, 230 / 115V, Panel With Voltmeter ( 0-300V / 150V ) , Ammeter: 0-10A, Variable Resistive Load 115V, 10A, Single Phase. 57 Three Phase Transformer With Provision For The Connection In All Vector Groups ( Stardelta, Delta-Star Etc ) - 3-Phase, 1Kva, 415V / 230V, Transformer With Provision For The External Connection Terminals To Perform All Vector Groups ( Star-Delta, Delta-Star Etc. ) . 58 Isolation Transformer - Single Phase, 1Kva , 3Phase , 415V / 230V Isolation Transformer With Provision To Show Its Function And Testing Of It. 59 Tachometer For Speed Measurement-Digital Photo Tachometer • No Contact Rpm Measurement, Wide Measuring Range From 0.5 To 100, 000 Rpm. , Resolution: 0.1 Rpm ( < 1000 Rpm ) . • The Last Value Can Be Stored Into The Memory Automatically & Be Obtained By Pressing Memory Call Button With User Manual 60 4 Point Starter-For Operational Upto 7.5 Hp Dc Motor, 230Vdc. 61 Ac Variac ( Closed Type ) - Single Phase 8A, 0-270V, Rotary Type 62 Clip On Meter-Clip On ( Digital Led Display ) Type Meter Suitable For Measurement Of ( I ) Ac / Dc Current 5 / 10 / 50Amp, With Zero Set Button ( Ii ) Voltage:600Vac / 500Vdc, ( Iii ) Resistance: 0-10Mohms. 63 The Three Phase Squirrel Cage Induction Motor Setup With Various Starters- Complete Panel With Dol, Star-Delta , Auto-Transformer Starter With 2Hp , 3Phase, 415V , 4Pole, 1500Rpm, Squirrel Cage Induction Motor With Suitable Foundation & User Manual 64 Three Phase Squirrel Cage Induction Motor For Direct Load Test To Plot The Various Characteristics-2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 65 Three Phase Squirrel Cage Induction Motor For No Load And Blocked Rotor Test- 2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 66 Three Phase Squirrel Cage Induction Motor For Speed Control-Applicable Methods: I ) Auto-Transformer, Ii ) Vvvf. Specification: 2Hp , 3Hp , 415V, 4Pole, 1500 Rpm Three Phase Squirrel Cage Induction Motor With Necessary Panel Meters And Equipments. 67 Three Phase Slip Ring Induction Motor With Necessary Panel, Proper Base Foundation - To Measure The Open Circuit Voltage Ratio Of The Three Phase Slip Ring Induction Motor.Specification: 2Hp , 3Ph , 415V, 4Pole, 1500 Rpm 68 Three Phase Alternator For Oc, Sc And Load Test-3 Kva, 415 V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With Dc Motor ( Shunt ) 5Hp, 220 V, 1500Rpm, 4-Point Dc Starter, 3-Phase Variable Resistive Load 220 ( L-L ) , 15A Per Phase, With Necessary Panel, Proper Base Foundation 69 Squirrel Cage 1 Hp, 400V I / M & Stroboscope To Measure Slip- I ) 1Hp, 415V, 3-Ph, 50Hz, 1440 Rpm Squirrel Cage Induction Motor With Loading Arrangement. Ii ) Stroboscope For Frequency 0-6Khz. 70 Three Phase Synchronous Motor-Synchronous Motor:3Hp, 415V, 1500 Rpm, Excitor 220V, Dc Through Slipring, Dc Shunt Generator, 1.5Kw, Rpm, 230V Dc, Regulator Control With Necessary Panel, Proper Base Foundation 71 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method-Synchronization Of 3 Phase Alternators: 2- Numbers Of 3 Kva, 415V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With 2-Numbers Of Dc Motors ( Shunt ) 5Hp, 230Vdc, 1500Rpm Alongwith Synchronisation Panel With Synchronoscope, 3-Lamps ( With Fuse ) For Lamp Method, Ammeters & Voltmeters For Dc Motors And Alternator, Digital Frequency Meter, Digital Rpm Meter For Dc Motors, 4-Point Dc Starters For Both Motors, 3-Phase Star Connected Variable Resistive Load, 4-Pole Mcb ( S ) & Variable Dc ( With 2-Pole Mcb ) Field Control For Both Alternators. The Whole Set-Up Needs To Be Equiped With Proper Electrical Protection, Base Foundation, Connector Cables, With User Manual, 72 Stepper Motor Controller Trainer-Stepper Motor Controller Trainer Stepper Motor : Motor Type :Unipolar, Torque : 6 Kg-Cm Phase Current : 0.8 Amp. , Stepping Angle : 1.8° / 0.9° Operating Voltage : 12 V Dc Input Pulse : 5V Ttl Compatible, Test Points :20 Gold Plated With User Manual 73 D.C. Servometer Speed Control -Trainer Kit-Kit For D.C. Servometer Speed Control- Position Control Of A 12V, 1A D.C.Gear Motor ( 50 Rpm ) Provision For Positive And Negative Tacho Generator Feedback Tacho Constant: 2V / 1000 Rpm Approximately Calibrated Dials For Reference And Output Position: Resolution 1° Servo-Potentiometers With Full 360°Rotation Microprocessor Based Waveform Capture / Display Card Built-In 3½Digit Dvm For Signal Measurements Built-In Step Signal And Ic Regulated Power Supplies For Electronic Circuits Separate Unit For Motor In A See-Through Cabinet 220V±10%, 50Hz Mains Operation With User Manual 74 Oil Hydraulic Circuit Trainer Unit: Hydraulic Circuit Trainer Unit Consisting Of Standard Components And Accessories For Carrying Out The Study Of Various Hydraulic Components And Hydraulic Circuits Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals 75 Pneumatic Trainer Kit With Compressor: Unit Is To Be Provided With Standard Mounting Board ( Modular Type ) With All Trainer Kits. All The Products Are To Be Provided With Suitable “One Touch Fittings / Push-In Fittings”.Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make , Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentionedalong With Delivery And Maintenance Kit & Manuals. 2 Hard Copies Of Operation Manual To Be Supplied; Installation, Demonstration And Training Of Faculties Are To Be Given. 76 Air Conditioning Trainer : Standard Specifications To Demonstrate The Basic Functioning Of Air-Conditioning. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manual. 77 Refrigeration Trainer: Standard Specifications To Demonstrate The Basic Functioning Of Vapour-Compression Cycle. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals. 78 Plug Gauge: Plug Gauge, Dimension: 25.4-0.5 Mm, Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned. 79 Refrigerator 190 Lit, Direct-Cool Single Door Refrigerator 80 Analog Rough Balance 0-2 Kg, Pan Shape Rectangle Weight Display Analog 81 Analog Rough Balance 0-5 Kg, Pan Shape Rectangle Weight Display Analog 82 Borosil Burette Fitted With Boroflow, 100Ml 83 Borosil Burette Fitted With Boroflow, 50Ml 84 Borosil Burette Fitted With Boroflow, 25 Ml 85 Borosil 3.3 Glass Beaker With Graduation Marks, 1000Ml 86 Borosil 3.3 Glass Beaker With Graduation Marks, 500Ml 87 Borosil 3.3 Glass Beaker With Graduation Marks, 250 Ml 88 Spylx Burette Stand With Clampboss Head And Rod, Burette Stand With Clampboss Head And Rod 89 Transparent Borosilicate Glass Volumetric Flask, 250 Ml 90 Transparent Borosilicate Glassvolumetric Flask, 500 Ml 91 Borosilglass Rod , Outer Diameter: 7Mm, Length: 205 Mm, Material: Polished 3.3 Borosilicate Glass 92 Test Tube Holder, Material: Wrought Iron, Length: 200 Mm, Maximum Opening: 20 To 25 Mm 93 Spherometer: Minimum Length Of Leg 25 Millimeter, Minimum Diameter Of Leg 4 Millimeter, Pitch Of The Screw 1 Millimeter, High Grade Tool Steel 94 Instrument To Observe The Effects Of Frictions Using Inclined Plane: Consisting Of A Wooden Plane 90X18cm Having Adjustment For Setting The Required Angle Precisely Complete With Frictionless Pulley Linear And Circular Scale Pan A Wheeled Trolley And A Set Of Eight Slide Draws Having Bottom Of Different Materials.Base Board Very Superior Quality Having Thick Teak Wood Base, Fittedwith Glass Plate, Complete With Brass Arc, Leveling Screws Pan , Pulley And Iron N.P Roller Export Quality. Heavy Pattern. 95 Stainless Steel Led Digital Vernier Calliper: Mitutoyo, Made In Japan, Length 6, Vernier Constant 0.01Cm , Made Of Stainless Steel, Measure Internal, External And Height Dimensions , Digital Display 96 Verification Of Kirchoffs Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance -1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 20V, Number Of Led Indicators Available To Indicate Power Input -1, Availability Of Dc Voltmeter Available On Board -Yes, Range Of Dcvoltmeter - 0-30Volt, Availability Of Dc Ammeter On Board- Yes, Range Of Dc Ammeter - 0-50 Ma, Number Of Test Points Provided Onboard To Observe Signals - 14, Necessary Patch Cords Available For Interconnection - Yes, Casing Material - Plastic. Two Round Analog Meters For Voltage & Current Measurement, Components Are Mounted Behind The Panel With Printed Circuit Diagram, Connections Are Brought With 4 Mm Banana Sockets, Instrument Fitted In Highly Shockproof Plastics Box, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Student Instruction Manual Will Be Provided With The Trainer Kit, 97 Instrument To Verify Inverse Square Law Of Radiation Using Photoelectric Effect: Type Of Display For On-Board Measurement- Digital, Availability Of Dc Voltmeter On Board - Yes, Range Of Dc Voltmeter - 0-20Volt, Availability Of Dc Ammeter On Board - Yes, Range Of Dc Ammeter - 0-100 Ma, Number Of Dc Regulated Power Supply With Short Circuit And Overload Protection-2, Voltage Range Of Continously Variable Dc Power Supply -20 Volt, Number Of Potentiometers Provided Onboard - 1, Number Of Test Points Provided In The Circuit To Observe Voltage And Current Signal - 5, On Board Schematic Diagram - Yes, Casing Material-Plastic, Number Of Led Indicators Available To Indicate Power Input - 1, Provision Of On-Board Knob For Adjusting The Voltage - Yes.Wooden Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter. On Board Analog Moving Coil Meters , Galvanometer : 30-0-30, Selenium Photocell Mounted In The Metal Box With Metal Base, Lamp Holder With 60-Watt Bulb With Metal Base, Weight : 1.0Kg Approx.Standard Accessories : Selenium Photocell Mounted In The Metal Box, Wooden Plank With Half-Meter Scale Fitted On It, Lamp Holder With Lamp, Patch Chords, Instruction Manual, 98 Conversion Of Galvanometer Into Ammeter Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 99 Conversion Of Galvanometer Into Voltmeter Kit:Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 100 Ohms Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance- 1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 5 Volt, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board -Yes, Availability Of Dc Ammeter On Board - Yes, Casing Material - Plastic.Ohms Law App: To Verify The Ohms Law: Fitted With Slidingrheostat.Onedcvoltmeter, Mo.65&Onedcammetermo-65, Mounted On The Same Base With Terminals, 4 Mm Patch Cords Are Provided With The Trainer Kit For Interconnections 101 Pn Junction Diode Characteristics Kit: Compleate Set With Inbuilt Power Supply & With Digital Voltmeter & Ammeter Compatible For Both Forward & Reverse Bias 102 Boyles Law Apparatus: Burrete Graduated In Cc ( Or Ml ) With 1.0 Cc / Div. Scale Graduated On Both Sides ( Left & Right ) With Same Marking. Both Open And Closed Tubes Can Be Slided Up And Down Over Aluminium Rod. High Quality Synthetic Tube ( 1.0 M Long ) . One Spare Synthetic Tube. ( Withextra 500Gm Mercury ) . Superiorquality, Open&Closedtypeonemeterlongteakwoodboard Onheavy Metal Base Fitted With Leveling Screws Without Mercury But Complete With Pressure Rubber Tubing & Glass Tubes, Routinequality, Doublerodwithopen& Closedendtubes&Pressuretubing. 103 Instrument To Determine The Moment Of Inertia Of A Flywheel About Its Own Axis Of Rotation: Good Quality Stainless Steel Full Setup.Csi Superiorquality Flywheel With Weights , Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets, Thickness: 4.4 Cm, Diameter :20 Cm, Wall Type With Pointer, With Revolution Counter, Set Ofslotted Weights For Flywheel Complete With Weights Cord And Hook. 104 Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup: Stand With Heavy Base, Transparent Scale With Mm Resolution, Horizontal Support For Spring, Brightly Colored Stretch Indicator, Three Springs With Identical Diameter And Length, But Different Spring Constants, Three Of Each Spring Included, For A Total Of Nine Springs: Spring Constants Are 5 N / M, 8 N / M, 70 N / M.Consisting Of 45Cm Long Mirrorscale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand, On Metal Stand With Mirror Scale, Superior On Heavy Base, About 50 Cm High For Taking More Readings, Complete With Weights, Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm.Weight Complete With Hook For Hanging 105 Stainless Steel Led Digital Outside Micrometer: Mitutoyo: Made In Japan, 0.25Mm-0.01Mm, Least Count 0.01Mm, Made Of Stainless Steel, Digital Display. 106 Linear Expansion Coefficient Apparatus:- Superiorquality , Height 50 Cm, With Brass Rod, Stainlesssteel Finish A 50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor.Three Metal Tubes — Brass, Copper ( 99.5%Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point.Thermoplastic Elastometer Tubing With 6.4 Mm I.D.A Source Of Steam Or Hot Water, Such As The Pasco Model Td-8556A Steam Generator.A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords 107 Gclamp-4 Inchirwin 4 Inch / 100 Mm Record H / D G-Clamp T1204 108 Post Office Box-Post Office Box Of Material-Brass And Coil Manganin, Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing 109 Muffle Furnace-Voltage ~230 V Ac, Insulating Maximum Temperatures 1000 C / 1200 C & Working Temperature 930 C / 1130 C Controlled By Digital Temperature Controller Cum Indicator 110 Digital Conductivity Meter-Electrode : Cell K = 1 – Pvc Sleeved Power Required: 230 V Ac 10%, 50 Hz, 5 Va Or 9 V Battery Standard Conductance: Conductance Of 1.000 M Stirrer Speed: 200 Rpm 111 Redwood Viscometer No.1-Material Stainless Steel Voltage 220 Volt Power Source Electric Frequency 50 Hz Phase Single Phase Accuracy + / - 3 °C Readability + / - 0. 5 Degree Capacity 50 Ml 112 Flash Point Apparatus With Stirrer-Voltage-115 V / 230 V, 50 Hz / 60 Hz Measuring Range- Up To 110 °C 113 Daniel Cell-Copper Vessel Complete With Porous Pot & Zinc Rod Diameter ~ 3.5- 4 Inch 114 Digital Voltmeter-Voltage -50-500 V Ac Accuracy ±10% 115 Arsenic Detection Kit-Reaction Time: 10 Minutes Test Type: Test Strip Colour Comparison Results Duration: Rapid 116 Digital Ph Meter-Resolution: 0.01 Ph Range: 0.0 To 14.0 Ph Temperature Controller Display 3 Digit 117 Cube Mould ( 70.6 Mm ) These Are Used For Casting Cement Mortar Test Specimens For Carrying Out Compressive Strength Test Of Cement As Per Is:516. These Moulds Are Manufactured As Per Is Specifications. The Faces Are Machined Flat Within ±0.02 Mm Tolerance And The Inside Dimensions Are Accurate Within ±0.2Mm. Each Mould Is Supplied With A Base Plate. Mould, Steel, For 70.6Mm Cube As Per Is: 10080-1982 Weight: Must Be 6.5 Kg Or More. Should Be Isi Mark. These Cube Moulds Are Made Of Steel. The Tolerance Between Faces Is Maintained At ±0.1 Mm And Plainness Is +0.03Mm. Cube Moulds Carry Isi Mark 118 Digital Rebound Hammer With Calibraton Anvil ( For Concrete Compressive Strength Analysis In The Field And Material Hardness Testing. ) Should Come With Rechargeable Batteries Including Charger. Capabality Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis. Should Conform To Astm C-805, En 12 504-2, Bs -1881- 202 And Other International Standards. Range:10 To 70N / Mm2 Impact Energy: 2.207 N-M Additionally The Following Minimum Specifications Must Be Met. Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Rebound Number, Compressive Strength And The Median. Should Come With Rechargeable Batteries Including Charger. Capability Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Software And The Required Cables For Connecting To The Computer Should Be Provided. A Calibration Anvil Should Be Provided 119 Ductility Testing Apparatus: Ductility Testing Machine Is: 1208 -1978 For Determining The Ductility Of Asphaltic Bitumen, Native Asphalt, Cut Back Bitumen And Blown Type Bitumen. It Consists Of Three Mould Assemblies On A Base Plate. A Separate Briquette Mould ( Total Length 75 ± 0.5 Mm, Distance Between Clips 30 ± 0.3 Mm, Width At Mount Of Slip 20 ± 0.2 Mm, Width At Minimum Cross Section 10 ± 0.1 Mm, Thickness Throughout 10 ± 0.1 Mm ) For Casting The Specimens Is Also Supplied. A Water Bath Of 10 Litres Capacity With A Perforated Shelf Not Less Than 50 Mm From The Bottom Of Bath And A Thermostat Controller For Heater. The Machine Has Two Standard Rates Of Travel Of 1 Cm / Mnt And 5 Cm / Mnt. The Movable Bracket Can Be Arrested Or Released Without Switching Off The Motor By A Clutch Arrangement. Suitable For Operation On 220V, 50 Hz, Single Phase Ac Supply. 120 Length Gauge Conforms To Is:2386 ( Part-I ) Used For Determination Of Elongation Index Of Aggregate. Length Gauge With Isi Certification Mark Is:2386 ( Part I ) , It Consists Of A Metal Plate On Which 8 Steel Pins Are Vertically Mounted With Specified Distances In Between. This Assembly Is Mounted On A Hardwood Base 121 Colorimeter ( Digital ) : Colorimeter, Equipped With Easy-To-Use Conventional Style Controls, Making It Ideal For Routine And Educational Use. Standard 10Mm Square Cuvettes, Semi-Micro Volume Cuvettes, Flowthrough Or Pour In / Suck Out Cells Can All Be Used With The Standard Sample Holder. Wavelength Range: 400 To 710Nm Wavelength Selection :: 8 In-Built Gelatin Filters: 430, 470, 490, 520, 540, 580, 600 And 710Nm Measurement Ranges:: 0-100%T, 0-1.50Abs, 0.1 To 1000 Concentration Bandwidth:Typically 40Nm Blank Drift:: 2% / Hr After 15 Minute Warm-Up Photometric Linearity :: 1%T Light Source :: Tungsten Filament Lamp Output:: Analogue, 10Mv Per Digit Power: 230V, 50Hz Size ( L X W X D ) :: 300 X 355 X 120Mm Weight:: 3Kg 122 Cod Test Apparatus: Cod Test Sample For Dry Bath Heating. Temperature 5+ 150 ◦C + / _ 1◦ C. Digital Controller With Heating Block. Sample Being Digested Within 2 Hours With Titration Method Bod Bottle Capacity : 300 Ml B.O.D. Incubators Has Been Designed Especially For Biological Oxygen Demand Determination & Other Applications Like General Incubators, Serum Studies & Enzyme Assays Test. We Can Also Customize The B.O.D. Incubators To Suit The Varied Requirement Of The Clients With In Stipulated Time Frame. Inner Chamber Made Of S.S.304 & Outer Chamber Made Of M. S. Powder Coated Full Length Inner Acrylic Door Permit Inspection Of Specimens Without Disturbing The Tem. Temp Controlled By Solid State Digital Controllers Housing All The Control With Pt-100 Sensor Illumination Light Are Provided For Viewing With Door Limit Switch. Cfc Free Hermetically Sealed Compressor Provide Temp. For Below Ambient Condition. Air Circulation Fan For Maintain Temp. Uniformity Throughout The Chamber. The Chamber Is Provided With Modular Removable Shelves Made Of S. S. For Complete Flexibility In Use. To Work On 230 Volts 50 H2. 123 Validation Protocols : Iq Oq & Pq Documentation With Calibration & Tradability Certificate Of Controller. Safety Features : Built In Temp Deviation Audio Visual Alarm, Safety Thermostat For Overshoot Temp. Cut Off System. Hrc Fuses For Compressor Heater & Mains Time Daily Circuit For Safety Of Compressor. This B.O.D. Incubator Is Available In Below Sizes: Size= 6Cu.Ft Inner Dimension W X D X H = ( 50 X 50 X 70 ) Cm Capacity= 175 Ltr No. Of Shelves= 2 124 Colony Counter: Working Temperature 5 To 50 ◦ C, 4 Digit Red Led Display, Petridish Holder, Fluorescent Lamp, Zero Reset Button, Dimension-30 ( W ) X33 ( D ) X10 ( H ) Cm, Net Weight 6.5 Kg. 125 Digital Nephelometer ( Turbidity Meter ) :Conformance:: Iso 7027 ( Ir Source ) Epa 180.1 ( Tungsten Lamp ) Measurement Range:: Auto-Ranging From 0 - 1000 Ntu Principle:: Nephelometric Non Ratio Accuracy:: + / - 2% Of Reading Plus 0.01 Ntu Resolution:: 0.01 Ntu ( 0 - 9.9 Ntu ) , 0.1 Ntu ( 10- 99 Ntu ) , 1 Ntu ( 100 - 1000Ntu ) . Response Time: < 6 Sec Display:Lcd , 3 Digit Light Source: Tungsten Filament Or Ir - Led ( 860Nm ) Power Supply: 120 - 240 Volts Ac Sample Cells: 30 M Shipping Dimensions :: 27.3X25.4X9.5Cm ( 10.7 X 10 X 3.75 ) Shipping Weight:: 1.92 Kg ( 2.9Lbs ) 126 High Volume Air Sampler: High Volume Sampler ( With Gaseous Attachment ) Technical Specifications :Flow Rate: - 0 To 1.8 M3 / Min Free Flowparticle Size: - Particles 0 To100 Microns & Below Collected On Filter Paper Holder. Spm Bigger Than 100 Microns Collected In A Separate Sampling Bottle Under The Cyclone. Sampling Time: - 24 Hours... 127 Low Volume Air Sampler: State Of The Art Microprocessor Electronics Flowrate And Volume Totalizations Displayed Are Temperature And Pressure ( 4 Options Available ) Classical Stp 0ºc, 760 Mmhg Normal T And P 20ºc, 760 Mmhg Modified Normal T And P 21.1ºc, 760 Mmhg Standard Ambient T And P 25ºc, 760 Mmhg Elapsed Time Meter Auto Zero Calibration Feature Of Flow Sensor Bright Led Display Flow Rate Accuracy Within ± 4% F.S. Rs-232 Communication Port W / Operator Selectable Download Frequency For Real-Time Data Auto Shut-Off On Time Or Volume 110 – 120 Vac, 50 / 60Hz; Single Phase 128 Hydraulic Bench: Top Tray: Size 1000 X 700 X 100 Mm ( Approx ) Water Circulation: 1 Hp Pump. Flow Measurement: Using Measuring Tank, Capacity 40L. Sump Tank: Capacity 100 Ltrs. Control Panel Comprises Of: Standard Make On / Off Switch, Mains Indicator, Etc The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure 129 Crushing Value Test Apparatus: Consists Of M.S.Cylindrical Container 150 Mm ±0.5Mm Dia X 130Mm To 140Mm High With Base Plate 200 To 230 Mm. / Sqr X 6Mm Thick. A Plinger Of 148Mm ± 0.5Mm Dia X 100 To 115Mm High. Supplied Complete With Tamping Rod, 16Mm Dia X 600Mm Long, One End Rounded. And 1 No. Metal Measure 115 ± 0.5Mm Dia X 180 0.5Mm High. Consists Of Both End Open Cylinder, Base Plate, A Plunger 130 Digital Ph Meter: Measuring Range Resolution Accuracy Ph Range 0 To 14 Ph ( Min. ) 0.001 Ph ± 0.002 Ph Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Rel. Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Temperature Mtc -10.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Atc -5.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Compensation :Automatic And Manual Temperature Compensation Display : It Should Have Thin Film Transistor ( Tft ) Display Of More Than 4 Inch Color ( Blue / Red / Green / Yellow ) Display For Better Vision Of Readings With Clear And Well Arranged Icons Of Parameters Like Ph, Temperature, Mv, Date & Time Etc. Ingress Protection Level : It Should Be Ip54 Complied Protection Level. Power Requirements : It Should Be Operable With 9 -12V / 10W Dc Adapter.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
10.
Health and Family Welfare #10357309 Price Bid
Tender For Who-Gmp Certified Medicine And Isi/Iso/Ce Certified Material, Pathological Items And Equipments , Name Of Items , Tab 5-Fluro Uracil500 Mg , Tab Abacavir 300 Mg , Tab Aceclofenac + Paracetamol + Serrapeptidase 100 + 325 +10Mg , Tab Aceclofenec 100Mg , Tab Acetazolamide 250 Mg , Tab Acetylsalicylic Acid (Aspirin) 25 Mg , Tab Acetylsalicylic Acid 150 Mg , Tab Acyclovir 200 Mg , Tab Acyclovir 800 Mg , Tab Albendazole 400 Mg , Tab Allopurinol300 Mg , Tab Allopurinol 100 Mg , Tab Alprazolam 0.25 Mg , Tab Amiodarone 100 Mg , Tab Amlodipine + Atenolol , Tab Amlodipine 10 Mg , Tab Amlodipine 5 Mg , Tab Amoxycillin+Clavulanic Acid (Amoxycillin 500 + Clavulanic Acid 125Mg) , Tab Artemether (A) + Lumefantrine (B) 20 Mg (A) + 120 Mg (B)1X6 , Tab Artemether (A) + Lumefantrine (B) 80 Mg (A) + 480 Mg (B) , Tab Artemether (A) + Lumefantrine (B)Oral Liquid 80 Mg (A) + 480 Mg (B)/5 M , Tab Ascorbic Acid (Vitamin C)100 Mg 100 Mg , Tab Aspirin 75 Mg , Tab Atenolol 50 Mg , Tab Atenolol100 Mg , Tab Atorvastatin 10 Mg , Tab Atorvastatin 40 Mg , Tab Azithromycin 250 Mg , Tab Azithromycin 500 Mg , Tab Baclofenbaclofen 40 Mg , Tab Betahistine 8 Mg , Tab Betamethasone 0.5 Mg , Tab Bicalutamide 50 Mg , Tab Bisacodyl 5Mg , Tab Bisacodylsuppositories 5 Mg , Tab Calcium Carbonate . 500 Mg , Tab Calcium Leucovorin50mg , Tab Calcium With Vitamin D3calcium Equivalent To 500 Mg & Vit. D3 250 Iu , Tab Capeciine500 Mg , Tab Carbamazepine 200 Mg , Tab Carbamazepine 200 Mg , Tab Carbimazole 10 Mg10strip , Tab Carboplatin450 Mg , Tab Cefixime 200 Mg , Tab Cefixime 50 Mg , Tab Cefpodoxime + Clavunate 200+125Mg , Tab Cefpodoxime- 200 Mg , Tab Cetirizine 10 Mg , Tab Cefadroxil 250 Mg , Tab Cefadroxil 500 Mg , Tab. Cefuroxime( 250 Mg) , Tab. Cefuroxime( 500 Mg) , Tab. Cefuroxime 500Mg + Clavunate 125Mg , Tab Chloroquine 250 Mg , Tab Chlorpromazine 100 Mg , Tab Chlorthalidone12.5Mg , Tab Chlorthalidone25mg , Tab Cinnarizine 25 Mg , Tab Ciprofloxacin 250 Mg , Tab Ciprofloxacin 500 Mg , Tab Ciprofloxacin + Tinidazole(250 Mg + 300 Mg) , Tab Ciprofloxacin+ Tinidazole (500Mg & 500Mg) , Tab Ciprofloxacin + Tinidazole(500Mg+600Mg) , Tab Cisplatin50 Mg , Tab Clarithromycin 250 Mg , Tab Clarithromycin 500 Mg , Tab Clofazimine 100 Mg , Tab Clofazimine 50 Mg 4 , Tab Clomiphene Citrate50 Mg , Tab Clonazepam 0.5 Mg , Tab Clopidogrel 75 Mg , Tab Clotrimazole (Vaginal )Pessary 500 Mg (With Applicator)Single , Tab Clozapine 25 Mg , Tab Clozapine 50 Mg , Tab Cyclophosphamide500 Mg , Tab Dapsone 100 Mg , Tab Deferasirox 250Mg , Tab Deferasirox 500 Mg30 , Tab Deferiprone500mg , Tab Deriphylline Sr 300 Mg , Tab Dexamethasone 0.5 Mg , Tab Diazepam 5 Mg , Tab Diclofenac 50 Mg , Tab Diclofenac 100Mg(Sr Tablet) , Tab Diclofenac 50Mg +Paracetamol 325Mg+Chlorzoxazone 500Mg , Tab Diclofenac 50Mg + Paracetamol 500Mg + Chlorzoxazone 250Mg(50Mg+500Mg+250Mg) , Tab Diclofenac Sodium + Paracetamol +Serratiopeptidase(50 Mg +325 Mg + 10 Mg) , Tab Dicyclomine 500 Mg , Tab Dicyclomine Hydrochloride 20 Mg , Tab Diethylcarbamazine 100 Mg , Tab Digoxin 0.25 Mg , Tab Digoxin 250 Mg , Tab Diloxanide Furoate 500 Mg , Tab Diltiazem 60 Mgl , Tab Diltiazemsr90 Mg , Tab Diltizem 30 Mg , Tab Diphenylhydantoin 30 Mg , Tab Dispersablehydroxyurea100 Mg , Tab Disulfiram 250 Mg , Tab Docetaxel120 Mg , Tab Domperidone 10 Mg , Tab Donepezil 5 Mg , Tab Doxorubicin50 Mg , Tab Drotaverine 40 Mg , Tab Empagliflozin25 Mg , Tab Enalapril Maleate 10 Mg , Tab Epirubicin100 Mg , Tab Erlotinib 150 Mg , Tab Escitalopram 10 Mg , Tab Ethamsylate250 Mg , Tab Ethinylestradiol (A) + Levonorgestrel (B) 0.03 Mg (A) + 0.15 Mg (B) , Tab Ethinylestradiol 0.01 Mg , Tab Ethinylestradiol 0.05 Mg , Tab Etophylline+Theophylline 100 Mg (Etophylline 77+Theophylline 23 )Mg , Tab Etoposide100 Mg , Tab Exemestine 25 Mg , Tab Ferric Carboxymaltose250mg , Tab Ferrous Ascorbate(100Mg. Elemental Iron+Folic Acid 1.5 Mg) , Tab Finofibrate160 Mg , Tab Finofibrate 40 Mg , Tab Fluconazole 150 Mg , Tab Flunarizine 5 Mg , Tab Fluoxetinecapsule 20Mg , Tab Folic Acid 5Mg , Tab Furazolidone 100 Mg , Tab Furusemide 40 Mg , Tab Gefitnib 250 Mg , Tab Gemciine1.4 Mg , Tab Glibenclamide 5 Mg , Tab Gliclazide 80 Mg , Tab Glimeperide 1 Mg , Tab Glimeperide 2 Mg , Tab Gutta Percha (Gp)30/Bottel , Tab Haloperidol 5 Mg , Tab Hydrochlorothiazid 12.5 Mg , Tab Hydrochlorothiazid 50 Mg , Tab Hydrochlorothiazide 25 Mg , Tab Hydroxychloroquine 200 Mg , Tab Hydroxyzine25 Mg , Tab Ibuprofen 400Mg , Tab Imatinib Mesylate400 Mg , Tab Imipramine 25 Mg , Tab Iron & Folic Acid Sugar Coatediron And Folic Acid Sugar Coateddried Ferrous Sulphate Ip Eq. To 45 Mg Ferrous Iron And 400 Mcg Folic Acid Ip (Pink Colored ) - , Tab Iron & Folic Acid Sugar Coatediron Folic Acid Sugar Coated (Blue ) Ferrous Sulphate Ip Equivalent To60 Mg Elemental Iron & 500 Mcg Folic Acid Ip , Tab Iron & Folic Acid Sugar Coatediron Folic Acid Sugar Coated (Red ) Ferrous Sulphate Ip Equivalent To60 Mg Elemental Iron & 500 Mcg Folic Acid Ip , Tab Isosorbide -5-Mononitrate 20 Mg , Tab Isosorbide Dinitrate 5 Mg , Tab Itraconazole/Capsule 100 Mg , Tab Ivermectin 12 Mg , Tab Ketorolac10 Mg , Tab Labetalol 100 Mg , Tab Lenalidomide 25 Mg , Tab Letrozole 2.5Mg , Tab Levetiracetam 250 Mg , Tab Levodopa (A) + Carbidopa (B) 100 Mg (A) + 10 Mg (B) Cr , Tab Levodopa (A) + Carbidopa (B) 100 Mg (A) + 25 Mg (B) Cr , Tab Levodopa (A) + Carbidopa (B) 250 Mg (A) + 25 Mg (B) , Tab Levofloxacin 250 Mg , Tab Levofloxacin 500 Mg , Tab Levonorgestrel 0.75 Mg , Tab Levocetirizine Tab 5Mg , Tab Levocetirizine + Monteleukast(5 Mg + 10 Mg) , Tab Levocetrizine 10 Mg, Montelucost 20 Mg , Tab Levocetrizine Hcl 5Mg + Ambroxol Hcl 75 Mg , Tab Levothyroxine 100 Mcg100per Bottle , Tab Levothyroxine 50 Mcg100per Bottle , Tab Linezolid 600 Mg , Tab Lithium Carbonate 300 Mg , Tab Loperamide 2 Mg , Tab Lorazepam 1 Mg , Tab Losartan10 Mg , Tab Mebeverine 200 Mg10 X 15 , Tab Medroxy- Progesterone 10 Mg , Tab Mefenamic Acid 250Mg + Drotaverine 80Mg , Tab Metformin + Gliclazide 500+80Mg , Tab Metformin 500 Mg , Tab Metformin-Sr1000mg10x15 , Tab Methotraxate50 Mg , Tab Methyl Ergometrine Maleate 0.125 Mg , Tab Methyldopa 250 Mg , Tab Methylprednisolone 16 Mg , Tab Methylprednisolone 4 Mg , Tab Metoclopramide 10 Mg , Tab Metoprololsr25 Mg , Tab Metoprololsr/Plain50 Mg , Tab Metronidazole 400 Mg , Tab Mifepristone 200 Mg1 Per Pack , Tab Misoprostal 100Mcg , Tab Misoprostal 200 Mcg4in 1 Pack , Tab Misoprostol 200Mcg (Oral/ Vaginal) , Tab Montelukast 5 Mg , Tab Morphine 10 Mg , Tab Morphine+I469sr/30 Mg , Tab Multivitamin Sugar Coated Nfi Formula Sugar Coated Vit A 2500 Iu , Vit C 50Mg, Calcium Pantothenate- 1Mg,Vit B1 2 Mg Vit B6 0.5 Mg Vit D3 200 Iu Vit , Tab Nicotinamide 50 Mg7 , Tab Nifedipine 10 Mg , Tab Nitroglycerine (Glyceryl Tri Nitrate)Sub-Lingual0.5 Mg10 , Tab Norfloxacin 400 Mg , Tab Norfloxacindispersible100mg , Tab Ofloxacin200 Mg , Tab Ofloxacin400mg , Tab Ofloxacin + Ornidazole(200Mg And 500Mg , Tab Ofloxacin 200Mg +Tinidazole 600Mg(Tab) , Tab Olanzapine 5 Mg , Tab Olanzapine10 Mg , Tab Ondansetron 4 Mg , Tab Ormeloxifene 30 Mg , Tab Oxaliplatin100 Mg , Tab Paclitaxel260 Mg , Tab Paracetamol 500Mg , Tab Paracetamol 650Mg , Tab Penicillin V (Phenoxymethyl Penicillin)250 Mg , Tab Phenobarbitone 30 Mg , Tab Phenobarbitone 60Mg , Tab Phenytoin/ Diphenylhydantoin 100Mg , Tab Povidone Iodinevaginal Pessary 200Mg10 X 10 , Tab Prednisolone 10Mg , Tab Prednisolone 20 Mg , Tab Prednisolone 20Mg , Tab Prednisolone 30Mg , Tab Prednisolone 40Mg , Tab Pregabalin 150 Mg , Tab Primaquine 15 Mg , Tab Primaquine 2.5 Mg , Tab Primaquine 7.5 Mg , Tab Propranolol 10 Mg , Tab Pyridoxine 10 Mg , Tab Pyridoxine 100 Mg , Tab Pyridoxine 40 Mg , Tab Quinine 300 Mg , Tab Rabeprazole 20 Mg , Tab Ramipril 2.5 Mg , Tab Ranitidine 150 Mg , Tab Riboflavin 5 Mg7 , Tab Risperidone 2 Mg , Tab Salbutamol 4 Mg , Tab Sitagliptin 50 Mg , Tab Sodium Valproate 500 Mg , Tab Sorafenib 200Mg , Tab Spironolactone 25 Mg , Tab Sucralfate 20 Mg , Tab Sulfamethoxazole And Trimethoprim800mg +160Mg , Tab Sulfamethoxazole+ Trimethoprim (Pediatric S) 400 Mg+80 Mg , Tab Sulfamethoxazole+Trimethoprim200mg +40 Mg , Tab Sulfasalazine 500 Mg , Tab Sumatriptan 25 Mg , Tab Sunitinib/Capsule50 Mg , Tab Sitagliptin 50 Mg +Metformine500mgs , Tab. Deferiprone 500Iu , Tab Tamoxifen 10 Mg3 , Tab Tamoxifen20 Mg , Tab Tapentadol 100 Mg , Tab Telmisartan 40 Mg , Tab Temozolamide 250 Mg , Tab Thiamine 100 Mg7 , Tab Thinylestradiol (A) + Levonorgestrel (B) 0.03 Mg (A) + 0.15 Mg (B) With Ferrous , Tab Tinidazole 300 Mg , Tab Tramadol 50Mg , Tab Tranexamic Acid 500Mg , Tab Trihexyphenidyl 2 Mg , Tropicacyl Plus Eye Drop , Tab Verapamil 40 Mg , Tab Vincristin1 Mg , Tab Vitamin. B Complex Nfi (Prophylactic) B1 2 Mg, B2 2Mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg , Tab Warfarin 1 Mg , Tab Warfarin 2 Mg , Tab Warfarin 5 Mg , Tab Zinc Sulphate Dispersible 10Mg , Tab Zinc Sulphate Dispersible 20Mg10 X 10 , Tab Zoledronic Acid4 Mg , Tab Zolpidem10 Mg , Cap Amoxycillin 250 Mg10 X 10 , Cap Amoxycillin 500 Mg10 X 10 , Cap Ampicillin 250 Mg10 X 10 , Cap Ampicillin 500 Mg10 X 10 , Cap Cephalexin 250 Mg10 X 10 , Cap Cephalexin 500 Mg10 X 10 , Cap Clindamycin 150 Mg10 X 10 , Cap Cloxacillin 125 Mg10 X 10 , Cap Cloxacillin 500 Mg10 X 10 , Cap Cycloserine 125 Mg10 X 10 , Cap Doxycycline 100Mg10x10 , Cap Hydroxyurea 500 Mg , Cap Nifedipine 5 Mg10 X 10 , Cap Pomalidomide 2 Mg , Cap Rifampicin 150Mg , Cap Rifampicin 300Mg , Cap Rifampicin 450Mg , Cap Rifampicin 600Mg , Inj Acyclovirinj 250 Mg/Vialvial , Inj Adenosineinj 3 Mg/ Ml -2 Ml Amp , Inj Adrenalineinj 1 Mg/ Ml1 Ml Amp , Inj Amikacininj 100 Mg/2 Ml2 Ml Vial , Inj Amikacininj 500 Mg/2 Ml Vial2 Ml Vial , Inj Aminophylline Inj 25 Mg/ Ml10 Ml Vial , Inj Amiodaroneinj 50 Mg/ Ml3 Ml Amp , Inj Amoxycillin+Clavulanic Acid (Amoxycillin 500 + Clavulanic Acid 100 Mg)/ , Inj Amphotericin B 50 Mgvial/Ampoules , Inj Ampicillininj 500 Mg/Vialvial , Inj Anti D Immunoglobulin For Iv/Im Use (Monoclonal)Inj 150Mcg1 Ml Vial , Inj Anti D Immunoglobulin For Iv/Im Use (Monoclonal)Inj 300Mcgpfs/Vial , Inj Anti Snake Venominj Polyvalent 10 Ml (Lyophilized)10 Ml Vial , Inj Antitetanus Immunoglobulinsinj 250 Iu/Vialvial , Inj Artesunateinj 60 Mg /Vialvial , Inj Artesunatepowder For Injection 120 Mg , Inj Atracurium 10 Mg/ Ml2.5 Ml Amp , Inj Atropine 0.6 Mg/ Ml2 Ml Amp , Inj Bendamustineinj 100 Mg , Inj Benzathine Penicilline12 Lakh Iu/Vialvial , Inj Benzathine Penicilline6 Lakh Iu/Vialvial , Inj Betamethasone 4 Mg/Ml1 Ml Amp , Inj Betamethasone Sodium Phosphateinj 4 Mg/ Ml1 Ml Amp , Inj Biphasic Isophane Insulininsulin Biphasic Aspart 30:70 100 Iu/Ml (Firm Has To Supply Compatible Pen Along With Cartridges As And When Required Without Any , Inj Bleomycininj 15 Mg , Inj Bortezomib 2 Mg , Inj Bupivacaine Hcl 0.5% 20 Ml Vial , Inj Caffeine Citrateinj 20 Mg/ Ml3 Ml Vial , Inj Calcium Gluconateinj 10%10 Ml Vial , Inj Carboprost (15-Methyl Pgf2a)Inj 250Mcg1 Ml Amp , Inj Cefotaximeinj 1Gm/Vialvial , Inj Cefotaximeinj 250 Mg/Vialvial , Inj Cefotaximeinj 500 Mg/Vialvial , Inj Ceftazidimepowder For Injection 1Gm , Inj Ceftazidimepowder For Injection 250 Mg , Inj Ceftriaxoneinj 1 Gm/Vialvial , Inj Ceftriaxoneinj 250 Mg/Vialvial , Inj Ceftriaxoneinj 500 Mg/Vialvial , Inj Chloroquineinj 40 Mg/ Ml5 Ml Amp , Inj Chlorpheniramineinj 10 Mg/ Ml10 Ml Vial , Inj Ciprofloxacininj 200 Mg/100 Ml100 Ml Ffs Bottle , Inj D-10 (Dextrose 10%)Iv Fluid (Dextrose 10%)500 Ml Ffs Bottle , Inj D-25 Injection (Dextrose)Iv Fluid (Dextrose 25%)100 Ml Bottle , Inj D-25 Injection (Dextrose)Iv Fluid (Dextrose 25%)500 Ml Bottle , Inj Decarbazine 200 Mg10 Mg /Ml , Inj Desferrioxamineinjection 500 Mgvial , Inj Dexamethasoneinj 8 Mg/2 Ml2 Ml Vial , Inj Dextrose 5%Iv Fluid(Dextrose 5%)500 Ml Ffs Bottle , Inj Dextrose With Salinei/V Fluid (Dextrose 5% + Saline 0.9%)500 Ml Ffs Bottle , Inj Diazepam 5 Mg/ Ml2 Ml Amp , Inj Diclofenac 25 Mg/ Ml3 Ml Amp , Inj Dicyclomine Hydrochloride 10 Mg/ Ml2 Ml Amp , Inj Diltiazeminjection 5 Mg/Ml , Inj Dobutamineinj 50 Mg/ Ml5 Ml Amp , Inj Dopamineinj 40 Mg/ Ml5 Ml Amp , Inj Doxorubicininj 50 Mg , Inj Drotaverine 40 Mg/2 Ml2 Ml Amp , Inj Drotaverineinj 40 Mg/2 Ml2 Ml Amp , Inj Duvadilan 5Mgvial , Inj Enoxaparin Inj 40 Mg Equivalent To-4000 Iuvial/Pfs , Inj Erythropoietininjection 10000 Iu/Ml , Inj Erythropoietininjection 2000 Iu/Ml , Inj Esmolol 10 Mg/Ml , Inj Etophylline +Theophylline 220 Mg/2 Ml (169.4+50.6 Mg)2 Ml Amp , Inj Fentanyl50 Microgram/Ml2 Ml Amp , Inj Ferric Carboxymaltose50mg/Ml20 Ml Vial , Inj Fluphenazineinjection 25Mg1ml Vial/ Ampoules , Inj Fulvestrantinj 500 Mg , Eye Drop Flurbiprofen+Methylcellulose , Inj Furusemideinj 10 Mg/ Ml2 Ml Amp , Inj Gentamicininj 40 Mg/ Ml2 Ml Amp , Inj Glucose (A) + Sodium Chloride (B)Injection 5% (A) + 0.9% (B)500Ml Ffs , Inj Glycopyrolate 0.2 Mg/ Ml1 Ml Amp , Inj Haloperidolinj 5 Mg/ Ml1 Ml Amp , Inj Heparin Inj 1000 Iu5 Ml Vial , Inj Hepatitis B Immunoglobulin100 Iu/Vialvial , Inj Human Chorionic Gonadotropininjection 10000 Iuvial Of 1 Ml Injection , Inj Human Chorionic Gonadotropininjection 5000 Iuvial Of 2 Ml Injection , Inj Hyaluronidase 1500Iu , Inj Hydrocortisoneinj 100 Mg/Vialdry Powder 100Mg/Vial , Inj Hydroxyethyl(6% Saline Solution For Infusion)Starch 6%Ip , Inj Hyoscine Butylbromide20mg /Ml1 Ml Vial/Amp , Inj Ifosfamideinj 1 Gm , Inj. Deferoxamine500mg/Vial , Inj Insulin Solubleinj 40 Iu/ Ml10 Ml Vial , Inj Irinotecaninj 100 Mg , Inj Iron Sucroseinj 100 Mg/5 Ml5 Ml Amp , Inj Iv Human Immunoglobin 5% Iv Ig(5Mg/100Ml Each), , Inj Ketamine 10 Mg/ Ml10 Ml Vial , Inj Labetalolinj 20 Mg/4 Ml4 Ml Amp , Inj Labetalolinjection 5 Mg/Ml , Inj Lignocaine 2% 30 Ml Vial , Inj Lignocaine+Adrenaline 2% + 0.005 Mg/ Ml30 Ml Vial , Inj Lorazepaminj 2 Mg/ Ml1 Ml Vial , Inj Magnesium Sulphate 500 Mg/Ml , Inj Mannitolinj 20%100 Ml Ffsbottle / 350 Ml Ffs Bottle , Inj Medroxy- Progesteroneacetateinjection 150 Mg1 Ml / Vial , Inj Mephentermine 30 Ml Vial Mg/Ml10 Ml Vial , Inj Meropenem500 Mgvial , Inj Methyl Ergometrine Maleate 0.2 Mg/ Ml1 Ml Amp , Inj Methylprednisoloneinjection 1000 Mg/Mlvial , Inj Methylprednisoloneinjection 500 Mgvial Of 4 Ml , Inj Metoclopramideinj 5 Mg/ Ml2 Ml Amp , Inj Metronidazole 500 Mg/100 Ml100 Ml Ffs Bottle , Inj Midazolam 1 Mg/ Ml 5 Ml Amp/ 10Ml Vial , Inj Morphine 10 Mg/ Ml1 Ml Amp , Inj Morphineinjection 15 Mg/Mlvial , Inj Naloxoneinj 0.4 Mg/ Ml1 Ml Amp , Inj Neostigmine 0.5 Mg/ Ml1 Ml Amp , Inj Nitroglycerine (Glyceryl Tri Nitrate)Inj 25 Mg/5 Ml5 Ml Amp , Inj Noradrenalineinj 2 Mg Base/2 Ml Amp.2 Ml Amp , Inj Ondansetroninj 2 Mg/ Ml2 Ml Amp , Inj Oxytocin Injection 5Iu/Mlinjection 5 Iu/Ml1 Ml Ampule , Inj Pantoprazoleinj 40 Mg/Vialvial , Inj Paracetamol150 Mg/ Ml2 Ml Amp , Inj Pemetrexedinj 500 Mg , Inj Pentazocine 30Mg/Ml1 Ml Ampule , Inj Pheniramineinjection 22.75 Mg/Ml2 Ml Vial , Inj Phenobarbitoneinj 200 Mg1 Ml Amp , Inj Phenytoininj 50 Mg/ Ml2 Ml Amp , Inj Phytomenadione 10 Mg/Ml10 Mg Ampule , Inj Pioglitazone15mg , Inj Piperacillin +Tazobactam 4.5 Gm/Vialvial , Inj Pralidoxime (Pam)Inj 25 Mg/ Ml20 Ml Amp , Inj Premix Insulin30:70 Injection (Regular:Nph)2 , Inj Premix Insulin30:70 Injection 40 Iu/Ml , Inj Promethazine 10 Mg/Mlone Injection 1 Vial , Inj Promethazine 50 Mg (25Mg/ Ml)2Ml Vial/Ampoules , Inj Propofal 10 Mg/Ml1 Ml /Vial , Inj Protamine 50 Mg/5 Ml , Inj Quinineinj 300 Mg/ Ml2 Ml Amp , Inj Rabies Immunoglobulin300 Iu/2 Ml2 Ml Vial , Inj Rabies Vaccine (Cell Culture) Id/Iminj 2.5 Iu/ Ml1 Ml Vial , Inj Ranitidineinj 50 Mg/2 Ml2 Ml Amp , Inj Ringer Lactatei/V 0.24 % V/V Of Lactic Acid ( Eq. To 0.32% W/V Of Sodium Lactate), 0.6 % W/V Sodiumloride, 0.04 % W/V Potassium Chloride And 0.027 % , Inj Risperidone50 Mgvial Of 2 Ml , Inj Rituximabinj 500 Mg , Inj Sodium Bicarbonate Inj7.5% W/V10 Ml Amp , Inj Sodium Chloride - Hypotonicinj N/2(0.45%)500 Ml Ffs Bottle , Inj Sodium Chloride - Isotonicinj 0.9% Isotonic(Equivalent To Na+154 M Mol/L, Cl+154 M Mol/L)100 Ml Ffs , Inj Sodium Chloride - Isotonicinj 0.9% Isotonic(Equivalent To Na+154 M Mol/L, Cl+154 M Mol/L)500 Ml Ffs , Inj Streptokinaseinjection 15 Lac/Vialvial , Inj Succinyl Choline 50 Mg/ Ml10 Ml Vial , Inj Surfactant Suspension 25 Mg/Ml100 Ml Vial , Inj Thiamineinjection 100 Mg/Ml1 Ml/Vial , Inj Thiopentone 0.5Gm Powder/Vial20 Ml Vial , Inj Topotecaninj 4 Mg , Inj Tramadol 50 Mg/ Ml2 Ml Amp , Inj Tranexamic Acid 500 Mg/5 Ml.5 Ml Amp , Eye Drop Tropicamide And Phenyephrine , Inj Trastuzumabinj 440 Mg , Inj Urokinase(5 Laciu)Vial , Inj Vancomycinpowder For 1 G , Inj Vancomycinpowder For Injection 250 Mg , Vvancomycinpowder For Injection 500 Mg , Inj Vecuronium 2 Mg/ Ml2 Ml Amp , Inj Verapamil 5 Mg/2 Ml , Inj Vinblastininj 10 Mg , Inj Vinorelbineinj 10 Mg , Inj Vitamin B12 ,Injection500 Mcg/Ml(30 Ml Amp/ Vial) , Inj Vitamin K11 Mg/0.5 Ml0.5 Ml Amp , Inj Water For 2 Ml Amp , Inj Water For 5 Ml Amp , Drop Atropine1% Eye Drops5 Ml Vial , Drop Boro-Spirit Ear Drops-0.183 Gm Boric Acid In 2.08 Ml Of Alcohol , Drop Carboxy Methyl Celluslose 10 Ml , Drop Carboxymethyl-Cellulosedrops 0.5%10 Ml/Vial , Drop Ciprofloxacineye / Ear Drop 0.3%5 Ml Vial , Drop Combo Ear Drop- Chloramphenicol 5% W/V+Clotrimazole 1%+Lignocainehydrochloride 2%Combo Ear Drop- Chloramphenicol 5% , Drop Dexamethasonedrop(0.1%, 5Ml),Eye 5Ml Eye Drop , Drop Fluconazoleeye3 Mg/Ml(10 Mlvial),Eye Drop10 Ml , Drop Gentamicin Ear(0.3%)5 Ml Vial , Drop Homatropine 2% , Drop Lantanoprost0.005%(5Ml),Eye 5Ml , Drop Moxifloxacin0.5% W/V(5 Ml),Eye 5Ml , Drop Moxifloxacin+Prednisolone Eye Drop , Drop Moxifloxacin+Dexamethasone Eye Drop , Drop Normal Salinenasal Drops: Sodium Chloride Drops 0.05% W/V , Drop Paracetamol- 125Mg/Ml15 Ml Bottle With Dropper , Drop Pilocarpine 4%5 Ml Bottel , Drop Pilocarpinedrops 1%5 Ml Bottel , Drop Pilocarpinedrops 2%5 Ml Bottel , Drop Phenyl Mercuric Nitrate And Sodium Chloride 5 , Drop Phenyl Mercuric Nitrate And Sodium Chloride 6 , Drop Gatifloxacin(0.3% ), Eye Drop , Drop Prednisolonedrops 1%10 Ml Bottel , Drop Sodium Aminosalicylate Granules10 Gm , Drop Timolol0.5% Eye Drops5 Ml Vial , Drop Tropicamidedrops 1%5 Ml Drop , Drop Wax Solvent Ear Benzocaine2.7% W/V10 Ml Bottel Drop , Drop Wax Solvent Ear Drops: Paradichloro- Benzene2 % W/V10 Ml Bottel , Drop Xylometazolinenasal Drops 0.05 %, , Drop Xylometazolinenasal Drops: Adult (0.1%) , Inhaler Halothane 250 Ml Bottle , Inhaler Isoflurane 250 Ml Bottle , Inhaler Oxygen , Inhaler Ipratropium Inhalation (Mdi/Dpi)20 Mcg/Dose Ipratropium Respirator Solution , Inhaler Tiotropium Inhalation(Dpi) 18 Mcg/Dose , Inhaler Tiotropium Inhalation(Dpi) 9 Mcg/Dose , Inhaler Salbutamol Inhaler 100Mcg/Dosemetered Dose Container , Ointment Hydrocortisone 0.5% , Ointment Hydrocortisone 1% , Ointment Povidone Iodine5% Ointment15 Gram Tube , Ointment Acyclovir3% -5Gm Tube , Ointment Gum Paint Tannic Acid 2% , Ointment Betamethasone 0.05% 15 Gm , Ointment Aceclofanac + Linsed Oil + Methyl Salicylate + Menthol 30Gm , Syp Dextromethorphan 10 Mg/5 Ml100 Ml Pack Bottle , Syp Albendazole200mg/5 Ml10 Ml Bottle , Syp Ambroxol Hcl 15Mg + Terbutaline Sulphate 1.25Mg + Guaiphenesin 50Mg 5Ml ((Additional Composition Of Menthol Also Acceptable) 100Ml Bottle), Syrup , Syp Ambroxol Hcl 15Mg + Terbutaline Sulphate 1.25Mg + Guaiphenesin 50Mg , Syp Amoxycillin+Clavulanic Acid (Amoxicillin 200Mg+ Clavulanic Acid , Syp Azithromycinsyp 200Mg/5Ml15 Ml Bottle , Syp Bromhexine Syp 4Mg/5Ml50 Ml Bottle , Syp Caffeine Oral Liquid 20 Mg/Ml , Syp Carbamazepine Oral Liquid 100 Mg/5 Ml , Syp Cefixime + Clavunate 50+31.25Mg , Syp Cefixime Oral Suspension 100Mg/5Ml10 Ml Bottle , Syp Cefpodoxime + Clavunate 30Ml , Syp Cephalexinsyp 125Mg/5Ml30 Ml Bottle , Syp Cetirizinesyp 5Mg/5Ml30 Ml Bottle , Syp Chloroquinesyp 160Mg /10Ml(50Mg/5Ml Base)60 Ml Bottle , Syp Chlorpheniramine Maleate (Paracetamol 125Mg + Phenylpherine 5Mg + Cpm 0.5Mg + Sodiym Citrate 60Mg + Menthol 1Mg) , Syp Codeineoral Solution 15 Mg/5 Ml60 Ml Bottle , Syp Diphenhydramine 100Ml , Syp Diethylcarbamazine Oral Liquid 120 Mg/5 Ml , Syp Domperidone1mg Per 1Ml Suspension30 Ml Bottle , Syp Doxycyclinedry50 Mg/5 Ml , Syp Gum Paint (Tannic Acid)2% W/V15 Ml Bottle , Syp Hydroxyzine 10 Mg/5 Ml , Syp Iron & Folic Acidsyp Iron Each 1 Ml Contains 20Mg Elemental Iron+Folic Acid , Syp Lactulosesolution 10 Gm /15 Ml100 Ml Bottle , Syp Levosalbutamol50mcg/Dose , Syp Levosulbutamol 100 Mcg , Syp Levocetirizine + Monteleukast((2.5 Mg + 4 Mg) / 5 Ml, 30 Ml Bottle) , Syp Levocetirizine + Monteleukast 2.5 Mg + 4 Mg / 5 Ml(60 Ml Bottle,Suspension),Suspension , Syp Metronidazoleoral Suspension 200 Mg/5Ml60 Ml Bottle , Tab. Isoniazid 150Mg , Tab. Isoniazid 300Mg , Tab. Pyrazinamide 500Mg , Tab. Pyrazinamide 400Mg , Tab. Pyrazinamide 500Mg , Tab. Pyrazinamide 750Mg , Syp Montelukast Syrup60 Ml Bottle , Syp Multivitamin With Protein 200 Ml , Syp Ondansetronsyp 2Mg/5 Ml30 Ml Bottle , Syp Ofloxacin + Ornidazole (50 Mg + 125 Mg) / 5Ml 30 Ml Bottle(30 Ml),Suspension , Syp Paracetamol 125Mg/5 Ml60 Ml Bottle , Syp Pediatric Solution Like Isolyte P, N/2 & N/5Pediatric Solution Like Isolyte P, N/2 , Syp Potassium Chlorideoral Solution 100Mg/Ml200 Ml Bottle , Syp Promethazinesyp 5Mg/ 5Ml60 Ml Bottle , Syp Salbutamol Syp 2Mg/5Ml60 Ml Bottle , Syp Sodium Valproate Each 5Ml Contains 200Mg200 Ml Bottle , Syp Sucralfate 1Gm/5Ml100ml Bottle , Syp Sulfamethoxazole+Trimethoprimoral Liquid ( 200Mg +40 Mg) / 5 Ml50 Ml Bottle , Syp Vitamin A 100000 Iu/Ml With Marked Spoon For 1Ml &2Ml100 Ml Bottle , Tube Atropine1% Eye Ointment3 Gram , Tube Atropinesulphate 1%, , 3 Gm , Tubebenzoyl Peroxidegel 5% , Tube Betamethasone Dipropionateointment 0.05%15 Gram , Tube Chloramphenicoleye Ointment 0.5%4G/5G , Tube Ciprofloxacineye Ointment 0.3%3/3.5 Gram , Tube Clotrimazole Cream2%W/W15 Gram , Tube Diclofenac 0.01 , Tube Diclogenac + Linseed Oil 3% + Methyl Salicylate 10% + Menthol 5% , Tube Duvadilan10 Mg10x50 , Tube Framycetin Sulphate1% Cream30 Gram , Tube Fusidic Acidcream/Ointment 2%5 Gram , Tube Lignocaine 2% 30 Gram , Tube Miconazolecream 2% W/W15 Gram , Tube Mupirocincream/Ointment 2%5 Gram , Tube Povidine-Iodine Germicidegargle 20% W/V , Tube Salicylic Acidointment 6% 30 Gm , Tube Silver Sulphadiazine Cream Usp 1% 25 Gram , Tab / Cap. Cycloserine 100Mg , Tab. Linozolid 600Mg , Protin Powder , Combo Pack Artesunate + Sulphadoxine + Pyrimethamine (Age Group 15 Or Above)Tab Artesunate 200 Mg(3Tab) + Sulphadoxine 750 Mg(2Tablets) + Pyrimethamine , Combo Pack Artesunate + Sulphadoxine + Pyrimethamine (Age Group 9 To 14 Years)Tab Artesunate 150Mg (3Tab)+ Sulphadoxine 500Mg (2 Tab)+Pyrimethamine 25Mg , Combo Pack Artesunate + Sulphadoxine + Pyrimethamine(Age Group Between 1-4 Years)Tab Artesunate 50 Mg (3 Tab) + Sulphadoxine 500 Mg(1 Tab) + Pyrimethamine 25 Mg , Combo Pack With Mifepristone + Misoprostol(1 Tablet Of Mifepristone 200 Mg And 4 Tablets Of Misoprostol 200Mcg)Combi Pack , Budesonide Nebulising Suspension Containing Budesonide 0.5 Mg/2 Ml2 Ml , Jelly Glycerin Oral Liquid , Oral Suspension Amoxycillin125 Mg/5 Ml30 Ml Bottle , Oral Suspension Chlorpheniramineoral Liquid 2 Mg/5 Ml , Oral Suspension Ibuprofen 100Mg/5Ml60 Ml Bottle , Oral Suspension Valproateoral Solution 200Mg/5Ml100 Ml Bottle , Bleaching Powder Containing Not Less Than 30% W/W Of Available Chlorine (As Per I.P)Containing Not Less Than 30% W/W Of Available Chlorine (As Per I.P) , Glucose Packet 75 Mg For Ogtt Testglucose Packet 75 Mg For Ogtt , Reduced Osmolarity Ors Pkt. Who Formulao.R.S. Glucose- 75Meq,Sodium- 75M Eq Or M Mol /L,Chloride - 65Meq Or M Mol/L, Potassium- 20Meq Or M Mol/L , Citrate- 10M Mol/L Osmolarity -245M Osm/L,Dextrose 13.5G/L Sodium Chloride 2.6G/L Potassium , Hydrogen Peroxide Solution 6% , Povidone Iodine Solution 5%,100 Ml Bottle , Adult Brief Daiper Set- Made Of Ultra Absorbent Material With Leakage Barrier & Having Soft, Flexible Leg Elastic. With Wetness Indicator. Made Up Of Woodpulp, Sap, Absorbent Nonwooven Fabric. The Set Contatin Two Pcs Of Medium Daiper {Nominal Size 81Cm-111Cm} For Waist Size 31-44 & Three Pcs Of Large Daiper {Normal Size 85Cm-128Cm} For Waist Size 34-50 , A V Fistula Sterilized Twin Needle(17 G (Two Needle Pack)),Consumable , A.V Fistula Needle - 16 No , A.V Fistula Needle - 17 G , A.V. Blood Line (Post Haemodialysis Tubing) , A.V. Blood Line (Post Haemodialysis Tubing) , A.V. Blood Line (Post Haemodialysis Tubing) High Quality , A.V. Blood Line (Post Haemodialysis Tubing) High Quality , Abdominal Belt(32 Inch Each),Consumable , Abdominal Belt(34 Inch Each),Consumable , Abdominal Belt(36 Inch Each),Consumable , Abdominal Belt(38 Inch Each),Consumable , Abdominal Drain Set 28 No , Abdominal Drain Set 32 No , Abdonel Belt Lsstandard Quality , Absolute Alcohol (Ethanol)(1X500 Ml = 500 Ml),Consumable , Absorable Surgical Suture Rb Needle Size No 1-0,30 Mm Length -70 Cm , 12 Foils Per Packet , Polyglycolic Acid (Pga) , Absorbable Gelatine Sponge Ip 80Mm X 50Mm X 10Mm , Absorbable Surgical Suture Braided Polyglycolic Acid 3/8 Circle Reverse Cuttingg(12Mm 45 Cmspatulated Needle),Consumable , Absorbent Cotton Roll 100 Gm Each Consumable , Absorbent Cotton Wool Ip 500 Grms (Each)(Roll),Consumable , Acetic Acid - Solution(3% 100 Ml Bottle),Consumable , Acetone Detection Kit , Acetone Detection Kit(100 Gm),Powder , Acetone Solution Pack Of 2.5 Ltr , Acralic Board (Sainaj Board Acralic Sheet) , Acralic Board (Sainaj Board Acralic Sheet) , Ad Syringe(0.1 Ml),For Vaccine , Ad Syringe(0.5 Ml),For Vaccine , Adhesive Plaster Usp 7.5 Cm X 10 Mts/Roll Cloth Based , Adhesive Plaster Usp 7.5 Cm X 5 Mts/Roll Cloth Based , Adhesive Roll 1 Inch X 5 M / Roll Cloth Based , Adhesive Tape 7.5Cm X10(Mtr/Roll),Consumable , Advanced Rf Energy Hand Instruments Of 12Mm Shaft Diameter For Open Procedureswith Shaft Lengths(22Cm And Should Be Both Hand & Foot Activated),Consumable , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths (35Cm And Should Be Both Hand & Foot Activated With Curved Tip),Consumable , Advanced Rfenergy Hand Instrument Of 5Mm Shaft Diameter For Laparoscopic Procedure With Shaft Length 35Cm With 55Degree Articulation And Should Be Both Hand(Foot Activated),Consumable , Advanced Rfenergy Hand Instrument Of 5Mm Shaft Diameter For Laparoscopic Procedure With Shaft Length 45Cm And Should Be Both Hand(Foot Activated With Curved Tip),Consumable , Advanced Rfenergy Hand Instrument Of 5Mm Shaft Diameter For Open Procedure With Shaft Length 14Cm And Should Be Both Hand And( Foot Activated),Consumable , Advanced Rfenergy Hand Instrument Of 5Mm Shaft Diameter For Open Procedure With Shaft Length 25Cm And Should Be Both Hand And(Foot Activated),Consumable , Advanced Rfenergy Hand Instrument Of 5Mm Shaft Diameter For Open Procedure With Shaft Length 35Cm And Should Be Both Hand And(Foot Activated),Consumable , Albumin600 Ml(Model Ba 400 System (Mfg Bybio System)),Consumable , Albumin600 Ml(Model Ba 400 System ,Consumable , Alchlol Absouite 500Ml (Ethanol) 99.9% , Alcohal Based Hand Sanitizer(500Ml Bottle With Dispenser),Consumable , Alcohal Based Hand Sanitizer(500Ml Bottle With Dispenser),Consumable , Alkaline Phosphatase (Alp) Dea 300 Ml(Model Ba 400 System (Mfg Bybio System)),Consumable , Alkaline Phosphatase Kit (Kinetic) 10X2.2Ml 44 Test/Kit Consumable , Alkaline Phosphate Kinetic 2*25 Ml(Semi Auto End Point),Consumable , Alkaline Phosphate(100 Ml (5 X 20)),Consumable , All Human (Bovine Aprotinin Free) Fibrin Sealant(1 Ml),Consumable , All Human (Bovine Aprotinin Free) Fibrin Sealant(2 Ml),Consumable , All Out Refill , All Out With Refill , Almehra Iron 6X3x1.5”, 22 Gauge , Alphacypermetherin 5% Wdp , Alt/Gpt 600 Ml , Alumeium Bartan , Aluminium Potassim Sulphate (Each),Consumable , Ambu Bag / Adult Each -1700Ml, With Oxygen Connecting Tube ,Should Be Supplied With A Carry Pouch , Ambu Bag Should Be Complete With Required Autoclavable Valves And Other Accessories,(Should Have Silicon Rubber Bellow To Withstand Autoclave At 134 Deg.C),Consumable , Ambu Bag / Resuscitator Silicon 200-250 Ml Infant Size-Each, With Oxygen Connecting Tube ,Should Be Supplied With A Carry Pouch , Ambu Bag Should Be Complete With Required Autoclavable Valves And Other Accessories,(Should Have Silicon Rubber Bellow To Withstand Autoclave At 134 Deg.C) Should Be Multiple Times Autoclavable), Consumable , Aminoacid (Essential) Infusion(10% 100Ml Ffs Bottle),Bottle , Ammonium Sulphate (Analar (Gr/Ar) (1X500 Gm = 500Gm), Consumable , Anc Table 6X3x3 Of Iron , Anteriar Veginal Wall Retractor , Anti A Sera Igm(10 Vial),Consumable , Anti Abd Grouping Serum 3X10mlconsumable , Anti B Sera Igm(10 Vial),Consumable , Anti Malaria Larva Oil Harbal Based , Anti-D (Polyvalent)(1X10 Ml),Consumable , Antiseptic Concentrate For Floor Clening Pack Of 50 Litt. Can , Apit(2X4 Ml),Consumable , Apo-A(100 Tests),Consumable , Apo-B(100 Tests),Consumable , Asdesive Lable For Sputam Container , Aso Kit(25 Test/Packet),Consumable , Ast/Got 600 Ml , Attandent Bed Powder Coted 84Lx24Wx18H , Auramine O , Auto Clave (Poratable) Single Drum Aluminum Seamless Construction Made Of Albminium Alloy With Turning On Lid Highly Polished. It Comes With One Stop Cock (Continus Bleeding Valve) Safety Valve And Pressure Guage Size 12X12X12X20 , Auto Cleanser For Cbc Machine(2 Liter),Consumable , Auto Dill Solution For Cbc Machine(20 Liter),Consumable , Auto Lyser Solution For Cbc Machine(500Ml),Consumable , Auto Pippets Fixed Volume 10 Micro Liters Each Syring , Auto Pippets Fixed Volume 10 Micro Liters Each Syring , Auto Pippets Fixed Volume 1000 Micro Liters Eachsyring , Auto Pippets Fixed Volume 1000 Micro Liters Eachsyring , Auto Pippets Fixed Volume 20 Micro Liters Each , Auto Pippets Fixed Volume 20 Micro Liters Each Syring , Autoclave Ss , Double Walled Size (12X22) With Stand (Manual) Isi Marked , Autoclave Ss , Double Walled Size (16X24) With Stand (Manual)Isi Marked , Autoclave Ss , Electric Operated Size (12X14)With Stand , Autoclave Ss , Electric Operated Size (12X20) With Stand , Autoclave Ss , Eletric Operated Size (12X22)With Stand , A-V Blood Lines With Av Pressure Transducer Protector For All Machines Types And Dialysers (Acceptable For Fitting To All Standard Dialysers), Set , A-V Blood Lines With Av Pressure Transducer(Acceptable For Fitting To All Standard Dialyzers ) With Side Tubing- (For Heparinization And Av Pressure Monitoring) Ce And Iso Certificate Essential With Protector For All Machines Types And Dialysers(Post-Pump Tubing Sets Options Medical Grade Clear Tubing Guarded Access Ports For Reduced Infection Risks Parts Of Superior Quality, Each),Consumable , A-V Blood Lines With Av Pressure Transducer(Acceptable For Fitting To All Standard Dialyzers ) With Side Tubing- (For Heparinization And Av Pressure Monitoring) Ce And Iso Certificate Essential With Protector For All Machines Types And Dialysers(Post-Pump Tubing Sets Options Medical Grade Clear Tubing Guarded Access Ports For Reduced Infection Risks Parts Of Superior Quality, Each),Consumable , Axjust Cooler Plastic Body Standard Size , B.B Silk (12 Foils/Pkt)(3/8 Rcut Needle 45 Mm Length 76 Cm, Size 2/0)),Consumable , B.B Silk Size-3/0 (12 Foils/Pkt)(3/8Cir Rcut Needle 26Mm Length 76 Cm),Needle , B.B Silk With 1/2 Cir Rb Needle Size:1/0 20 Mm Length 75 Cm Non Absorbable Surgical Sutures Usp Surgical Material , B.B Silk With 1/2 Cir Rb Needle Size:2/0 30 Mm Length 75 Cmsurgical Material , B.B. Silk 6 Reels X 25 Mts Length 25 Mts. Black Braided Silk Without Needle In Reels Non Absorbable Surgical Sutures Usp 3-0(6 Reels Is Per Box Rate Should Be Quoted For 6 Reels),Consumable , B.B. Silk 6 Reels X 25 Mts Length 25 Mts.Black Braided Silk Without Needle In Reels Non Absorbable Surgical Sutures Usp-, 2-0(6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ),Surgical Material , B.B. Silk 6 Reels X 25 Mts Size:1/0(6 Reels Is Per Box Rate Should Be Quoted For 6 Reels),Surgical Material , Babcock- Laparoscopic 10Mm A Traumatic Babcock, Straight 360 Degree Rotating With Insulated Shaft, A Traumatic Jaws With Ratchet Mechanism, Plastic Grip(36 Cms Length, Independently Moving Jaws),Consumable , Babcock- Laparoscopic 5Mm A Traumatic Babcock, Straight 360 Degree Rotating With Insulated Shaft, A Traumatic Jaws With Ratchet Mechanism, Plastic Grip(36 Cms Length, Independently Moving Jaws),Consumable , Baby Diapers Small (10 Diaper Per Pkt) Standard Company , Baby Feeding Spoon , Baby Feeding Spoon Feeding Of Milk , Baby Oxygen Maskall Sizes , Baby Shuit , Baby Towile , Baby Tray Ss 15X18Of Ss With Cover Pack Of Of Ss With Cover , Bag Cayring (Bag) , Bag For Carrying Kit/Material During Home Visit , Balanced Salt Solution 500 Mlbottle(Each),Consumable , Barium Chloride 10% (500 Ml Bottle) , Barraquer Wire Speculum, Large(Num),Consumable , Basic Carbol Fuchsin For Afb Staining 25 Gm/Pkt , Basic Fuchine 25Gm (Dye Content 85% To 88%) , Basic Fuchisin(Sep.Chemical Name: Pararosaniline Hydrochloride,Chemical Structure: C20h20c1n3 Mol Wt:337.86, Dye Content: Approx 85%-88% &Dye Content Must Be Mentioned) Colour Metallic Green. , Battery 70D 26 Rmf For Vehicle , Bed Pan Female With Cover (Made Of Stainless Steel) , Bed Pan Male With Cover (Made Of Stainless Steel) , Bed Side Bench , Bed Side Locker Ss , Bedside Locker Standard Size Ss Top , Benedicts Qualitative Reagent(1X5 Lit),Consumable , Bilirubin (Direct) As 300 Ml ,Consumable , Bilirubin (Total) 600 Ml,Consumable , Bilrubin Total & Direct Auto 3X100ml (Span/Tulip/Erba) , Bio Hazard Labels , Bio Metric Attance Machin Menul Operated , Bio Metric Attance Machine Online Operated , Biochemistry Calibrator 5X5 Ml Consumable , Biochemistry Control Serum L1 5X5 Ml , Biochemistry Control Serum L2 5X5 Ml (Consumable , Biomedical Waste Collection Plastic Bag(Yellow)(450X450 Mm 55 Micron 100/Pkt),Consumable , Biomedical Waste Collection Plstic Bag(Black 750 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Black 900 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Blue 750 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Blue 900 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Red 750 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Red 900 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Yellow 750 X 900 Mm 55 Micron 100/Pkt),Bag , Biomedical Waste Collection Plstic Bag(Yellow 900 X 900 Mm 55 Micron 100/Pkt),Bag , Bio-Membrane( ),Consumable , Black Disinfectant Fluid90% Pure Pack Of 20 Litt , Black-Braided Silk With 1/2 Cir Cutting Needle 30Mm Length 75 Cm(1/0 12 Foils/Pkt),Consumable , Black-Braided Silk With 1/2 Cir Rb Needle 20 Mm Length 75 Cm 1/0 13 Foils/Pkt , Black-Braided Silk With 1/2 Cir Rb Needle 30 Mm Length 75 Cm 2/0 12 Foils/Pkt , Blanket For Baby , Blankets For Neonates , Bleaching Powder 25Kg Bag , Bleaching Powder Gr-Ii Is 1065/1989 With Upto Datepacked In 25 Kg Hdpe Bags Isi Marked Stable Consumable , Blood Culture Media Mycobacterium Spp(Bact/Alert Mp (Plastic)),Each , Bowelss Size 20 , Blood Administrations Set Adult , Blood Bag Refrigerator For 150 Bags Isi Mark Standard Company , Blood Bag Refrigerator For 300 Bags Isi Mark Standard Company , Blood Bag Refrigerator For 60 Bags Isi Mark Standard Company , Blood Bag Warmer , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(100 Ml),Bag , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(350 Ml),Bag , Blood Bank Refrigerator , Blood Cell Counter Key(Key),Consumable , Blood Culture Media Aerobic For Adult(Bact/Alert Fa Plus),Each , Blood Culture Media Aerobic For Pediatric(Bact/Alert Pf Plus),Each , Blood Culture Media Fungus- Bottles Per Year, Fungus Can Be Tested By All Quoted Bottles. In The Same Bottle Bacteria And Fungus Can Be Tested.; Fungus Can Be Tested By All Quoted Bottles. In The Same Bottle Bacteria And Fungus Can Be Tested.(-),Consumable , Blood Gluose (God/Pod) Semi Auto End Point(1000 Ml),Consumable , Blood Grouping Anti Sera A Monoclonal(10 Ml Vial),Consumable , Blood Grouping Anti Sera B Monoclonal : Antisera Should Be Transparent With More Than One Year Shelf Life At 2-6 C , It Should Give +++ Agglutination At 1.256 Dilution In 3-4 Sec With B Positive Cells 10 Ml , Blood Grouping Anti Sera B Monoclonal(10 Ml Vial),Consumable , Blood Grouping Anti Sera D Monoclonal :-Antisera Should Be Transparent With More Than One Year Shelf Life At 2-6 C, It Should Give +++ Agglutination At 1.256 Dilution In 3-4 Sec With D Antigen Positive Cells. 10Ml Vail (Eryclone Anti-D Igm) , Blood Grouping Anti Sera D Monoclonal(10 Ml Vial ,Consumable , Blood Transfusion Chair , Blood Urea (Bun) Uv(1000 Ml),Consumable , Blood Urea Reagent Kit(200Ml (2X100ml)),Consumable , Blood Urea(Arba),Consumable , Blood Vessel Introducers Needles 16G, Sterilized, Set , Bloting Paper(Paper),Consumable , Boiling Flask 2Lt , Boiling Flask 5Lt , Bottel Plastic 2Lt , Bovine Albumin (22% W/V)(1X5=5 Ml),Consumable , Bowel Baual Ss Size 8 Powder Coated , Bowl Plastic 50X30 , Bp Stument Cell , Bp Stument Marcury Isi Mark , Brain Thromboplastin For Prothrombin Time (Pt Reagent) 5Ml (Liquiplastin) , Broom Stick For Sputum Smear Prepration (8 Inches) , Brown Tap (2 Inches) , Bubble Cpap Machine , Bucket Brackets (For Hanging Set Of Single Fire Buckets) With Out Fire Bucket , Bucket Brackets (For Hanging Set Of Three Fire Buckets) With Out Fire Bucket , Burn Cage (Bed Cradle) , Cabinate Plain (Cr Sheet 1.00 Mm) Size 1675X840x480 Mm (Iron) , Cabinate Plain (Cr Sheet 1.00 Mm) Size 1980X915x480 Mm (Iron) , Cabinet Full Size (78X3619) Sheet Gauge 20 (Iron) , Calcium Arsenazo 600 Ml,Consumable , Capillary Tube 100 Piecesconsumable , Capillary Tube Biluribin Pack Of 100 Pieces , Carbol Fuchsin For Zn Stain (500Ml Bottle) (Becon) , Carbol Fuchsin For Zn Stain (500Ml Bottle) (Ranbaxy) , Carbol Fuchsin For Zn Stain (500Ml Bottle) (Star) , Carbolic Acid (Phenol) - Spc. Chemical Structure C6h50h, Molecular Wt: 94.11, Melting Point : 40 Digree C 2, Purity : 99.5% , Carbondioxide Gas In Medium Size Cylinder(B Type),Miscellaneous , Carbondioxide Gas In Small Size Cylinder(A Type),Miscellaneous , C-Arm Macchine , Cartain Complete(Cloth Silk With Ring And Stiching) , Catgut Chromic Size:2/0 Length 150 Cm , Catgut Chromic With 1/2 Cir Rb Needle 30 Mm Length 70Cm No. 1 -0, 12 Foils Per Packet , Catgut Chromic With 1/2 Cir Rb Needle 40 Mm Length 75Cm No. 1 Consumable , Catgut Chromic With 1/2 Cir Rb Needle 40 Mm Length 75Cm No. 2 Consumable(Each),Consumable , Cathetor Tray Ss With Cover 16X3 , Cassette(14 Inch X 17 Inch),Consumable For X-Ray , Cassette(8 Inch X 10 Inch),Consumable For X-Ray , Cc Camera 1/4 Ccd, 3.6 Mm Board Lens 380 Tvl 2 Lux Color Plastic/Dust Proof Metal Body Camera 2 Way Audio. Make;- Impex/Sparsh/ Grovers/Hinum/Vantage/Alpha/Vision. Model:-Cc-31/Bma-231/Hevs-209-3G/Hl110/Va- 2W380/Al-Col-106/Vaccs 200 , Cc Camera, 1/4 Ccd, 3.6 Mm Board Lens 380 Tvl 2 Lux Color Plastic/Dust Proof Metal Body Camera With Supply. Make;- Impex/Sparsh/ Grovers/Hinum/Vantage/Alpha/Vision. Model:-Cc-30/Bmc-430/Hev 20 01 /Hl109/Va-Ccs- Tvl2380/Al-Col-105A/Vaccs380s , Cc Camera, 1/4 Ccd, 3.6 Mm Board Lens 380 Tvl 2 Lux Color Plastic/Dust Proof Metal Body Camera. Make;- Impex/Sparsh/ Grovers/Hinum/Vantage/Alpha/Vision. Model:- Cc-72/Bmc-429/Dy-3723 Lph/Hl108/Va-Tvl380/Al-Col-104/Vaccs380 , Cc Camera, 10.1 Mega Pixle Cmos Sensor, Integreated Cleaning System, 2.5 Lcd Screen With 230K Pixle, 1600 Viewing Angle, High-Precision 9 Point Af System, Picture Style Image Processing Parameters, Digic Ii Image Processor With 0.2 Sec Start Up - (Each) , Cc Camera, 16 Channel Color Digital Video Recorder, 500 Gm Hdd, Full Triplex, Real Time Display (30 Frame Per Second) Make:- Impex/Sparsh/Grovers/Hinum/Vvantage/Alpha/Vision. Model:-Dv-62/Mcd-62/Dvr-29- Hk/Hl205dvr/Va-Hd500/Al-4C/B2616v , Cc Camera, 16 Channel Mono Chrome Duplex Multiplexer With Osd, Time Date And Alarm Facility, Make:-Impex/Sparsh/ Grovers/ Hinum/Vvantage/Alpha/Visionmodel:-M-41/Mx-16/Cplm-30-3/Hl202mx/Vaad16/Al-Mux- 16B/Vaad 16 , Cctv Cable, 3 Core + Coaxialfor 2 Way/Silent Camera, Make:- Impex/Sparsh/Grovers/Hinum/Vvantage/Alpha/Vision/Isi Model:-C-32/Cc-3/Alc-3C/Isi , Cd/Dvd Player , Ceiling Shadowless Lamp Double Dome Isi Marked , Ceiling Shadowless Lamp Single Domeisi Marked , Cell Clean For 5-Part Hematology Analyser All Model Consumable , Cell Pack For 5-Part Hematology Analyser All Model,Consumable , Cell Pack, Reagent Pack For Cell Counter((Erma And Mindrug) Complete Set),Consumable All Instement , Centeral Oxygen Supply For 10 Bedcomplete Fitting , Centeral Oxygen Supply For 30 Bedcomplete Fitting , Centeral Oxygen Supply For 5 Bed Complete Fitting , Central Venous Catheter Kit Single Lumen 18 G , Central Venous Catheter Kit(Single Lumen),Kit , Centrifuge Machine -12 Tube With Digital Display & Timer & Rpm , Centrifuge Machine -8 Tube With Digital Display & Timer & Rpm , Cervical Collar/Each-Soft, Medium Sized , Cervical Cotter , Chair Cushion Foam Thickness 3 With Cotton Cover Box Type , Chikungunya Card Test 1 Gg + 1 Gm (25 Test/Kit) , Chikungunya Card Test 1 Gg + 1 Gm (30 Test/Kit) , Children Toys 1- Jsvy] /Kkxs Ls [Khpus Okys F[Kyksus 2- Fcfymax Cykwdl] 3- Ckwdj Lcth ,Oa Qyksa Ds Vkdkj Okys Iykflvd F[Kyksus Vkfn 4- >Qu&>Qu 5- Iykflvd Ckwy , Chloroquine Solution 4 % Pack Of 5Ltr , Cholesterol600 Ml Consumable , Cholesterol Hdl Direct 160 Ml,Consumable , Cholesterol Kit End Point Enzymatic Kit 50 Test/Kit , Cholesterol Kit End Point Enzymatic Kit 5X20ml 200 Test/Kit , Cholestreol Kit Pack Of 10X10ml (Span/Tulip/Erba) , Chromic Catgut (12 Foils/Pkt)(Size:1/0 Length 150 Cm),Consumable , Chromic Catgut No 1.0 Round Dody, 40 Mm 12 Foils/Pkt , Chromic Size - 1, (12 Foils/Pkt)(1/2 Cir Rb Needle 40 Mm, Length 76 Cm),Needle , Chromic Size - 1, 12 Foils/Pkt(1/2 Cir Rb Needle 45 Mm, Length 100 Cm),Needle , Chromic Size - 1/0 (12 Foils/Pkt)(3/8 Cir Rb Needle 40 Mm, Suture Length 76 Cm),Needle , Chromic With 1/2 Cir Rb Needle 30 Mm Length 76Cm, 2-0 Usp, Absorbable Surgical Suture Surgical Material 12 Foils/Box , Chromic With 1/2 Cir Rb Needle 40 Mm Length 76 Cm (With Needle) ) Absorbable Surgical Sutures Usp,(Size 1, 12 Foils/Pkt),Surgical Material , Chromic With 1/2 Cir Rb Needle Size:1/0, 30 Mm Length 76Cm Absorbable Surgical Suture Surgical Material , Chromic With Cd Rb Needle 30 Mm Length 76 Cm Size:2/0 Absorbable Surgical Suture Surgical Usp, 12 Foils/Boxmaterial , Chromic With Cd.Rb Needle Absorbable Surgical Suture (12 Foils/Pkt)(40 Mm Length 76 Cm Size:1/0),Surgical Material , Chromic With St Rb Needle (12 Foils/Pkt)(60 Mm Length 76 Cm Size:2/0),Consumable , Cidex – 5Lter (2% Glutaldyhide) , Cidex Tray 10X5x3 , Cidex Tray 17X5x39 , Cidex Tray 26X53 , Cidex Tray 36X5x3 , Citric Acid Analar/Gr/Ar (1X500 Gm = 500Gm),Consumable , Cleanac-3 4000 Pack Size 5L(Cell Counter (Model No- Mek-6420P-Japan)),Consumable , Close Wound Drainage Device Under Negative Pressure(Closed Wound Suction Unit) Size 200 Ml(Catheter Size 18, Each),Consumable , Coagulometre Single Chanel , Coline 500Ml , Collagen Drysheet(20X40cm Sheet),Consumable , Collagen Drysheet(10X10cm Sheet),Consumable , Collagen Drysheet(15X30cm Sheet),Consumable , Collagen Wet(6X6 Cm),Sheet , Collection Vail 2Ml Pack 100 , Collection Vail 5Ml Pack 100 , Colorometre Digital , Colour Vision Chart , Complete Delivery Kit-1Plastic Desposable Gown (Non Woven Plastic Laminated,Leak Proof)-2(4*4),(2).Disposable Goggles For Protection Of Eyes-2 (Free Size),(3).Face Mask-2 Free Size,(4).Plastic Disposable Cap(Non Woven Plastic Laminated,Leak Proof)(1Pair,(5).Long Gloves Elbow Length-2Pairs(6 1/2 And 7),(6)Disposable Shoe Covers,Till Calf(Plastic)-2Pair(Free Size)As Per Attached Specification),Consumable [987797] , Computer Table (Size 4X2.6) With All The Fitting Of Parts , Computer Table 4’X2’ With All Fitting Of Parts , Con. (Hno3) Nitric Acid (2.5 Liter),Consumable , Conc Hcl (1X500 Ml = 500 Ml),Consumable , Conc Washing Solution500 Ml All Model Consumable , Conical Flask 2.5 Ltr , Conical Flask Cap. Of500ml Flat Bottal , Conical Flask Cap. Of 100Ml Flat Bottal , Conical Flask Cap. Of 2.5 Lit Falt Bottal , Coombs Ahg Sera 5Ml(Each),Consumable , Coombs Serum (Anti Human Globulin) (Polyvalent)(1X5=5 Ml),Consumable , Corrugated Drainage Sheet, Sterile, Multichannel, Single Use(2 Inch X 6 Inch (Pvc)-Piece),Consumable , Cotton Based Crape Bandage 10Cm X 4M (Box Of 10 Bandages) , Cotton Based Crape Bandage 15Cm X 4M (Box Of 10 Bandages) , Cotton Delivery Belt , Cover Slip With Isi Marked Size:18X18mm(+/- 1.00Mm),Thikness 0.13.. To 0.17Mm(Pkt Of 50 Pieces),Consumable , Cpap Machine , Cpk-Mb Kit (Kinetic) 25 Test/Kit , Cpk-Mb Kit (Kinetic) 25 Test/Kit , Creatinin Kit , Creatinine600 Ml(Model Ba 400 System),Consumable , Creatinine Calorimeter For Semi Auto Kinetic 4X60ml 480Test/Kit , Creatinine Kinetic Pack 2X50ml (Span/Tulip/Erba) , Cresent Knife(1 Each),Consumable , Crp (Hs)(100 Tests),Consumable , Crp Test Kit (Latex/Card) (25 Test/Kit) , Curved Scissors- Laparoscopic 5Mm Size, 360 Degree Rotating With Insulated Shaft, Non Ratchet , Plastic Grip(36 Cms Length, Monopolar Pin Provision For Usage With Electro Surgical Unit, Independently Moving Jaws),Consumable , Cushined Chair With Out Arm Size 865X410x450x500 Mm , Cushioned Chair With Arm Size 900X455x500x560 Mm , Cushioned Chair Without Arm Size 865X410x450x500 Mm , Cut Needle 48 Mm Stainless Steel Length(45 Cm Size 6),Needle 1/2 Ccs , Cvp Line Complete Set , Cvp Line Complete Set , Cyanemeth Solution For Hb 5 Litre , Cyanemeth Solution For Hb(Mfg By Beacon Diagnostic)(5 Lit Can),Consumable , Cylinder Brush , Cytochrome Stain With Buffer (500 Ml),Consumable [710030] , Cytoplasam Stain A&B Rapid Pap Pack Of 500Ml , D-Dimer(10X3 Ml),Consumable , D-Dimer(10X3 Ml),Consumable , Deaver Retractor Abdominal Central Oxygen Supply Complete Per Mtr , Dead Body Cover Standarad Quality , Defbrillator Biphasic, Features : Offers Variable Energy Level Selection, (2,3,5,7,10,20,30,50,70,100,150,200 Joules), Battery Capacity - 50 Shocks On Single Charge. Adult &Pediatric Paddles Support, Compact & Ligh Weight : Approx 5.0Kgs Max, Ecg Through Paddle , Dengurapid Test Card-Single Test , Dengu Card- Antigen(25 Card/Pkt),Consumable , Dengue Card Test 100 Test Kit , Dengue Card Test 100 Test Kit , Dental X-Ray Film Digital 1X150 , Dental X-Ray Film Size 31 X 41 Mm (150 Films / Pkt) , Desert Cooler 24” Exhaust Fan All Body Gi Sheet 22 Gauge , Desirepoly Bag Colour Sutable Forapprox 35Ltr Dustbeen , Desire Poly Bag Colour Sutable Forapprox 10Ltr Dustbeen , Desire Poly Bag Colour Sutable Forapprox 60Ltr Dustbeen , Desired Bio Hezard Poly Bag Capacity Of 30 Ltr , Desired Bio Hezard Poly Bag Capacity Of 50 Lit / 30 Lit. , Desired Bio Hezard Poly Bag Capacity Of 50 Ltr , Developer Powder (22.5 Ltr) For X-Ray , Developer Single Bath Liquid Concentrated Of Consistent Quality. It Sould Have Favoutable Contrast/Fog Ratio And Good Shelf Life - (5 Ltr Can To Make 22.5 Liters Working Solution) , Developer Single Bath Liquid Concentrated Of Consistent Quality. It Sould Have Favoutable Contrast/Fog Ratio And Good Shelf Life-2 Lit Can( To Make 9 Liters Working Solution) (Bromodex Mp Developer Concentrate) 9Ltr Packing , Developer Single Bath Liquid Concentrated Of Consistent Quality. It Sould Have Favoutable Contrast/Fog Ratio And Good Shelf Life-3 Lit Can( To Make 13.5 Liters Working Solution) (Bromodex Mp Developer Concentrate) 13.5 Ltr Packing , Diagnostic Strips For Urine Sugar/Albmin Packing: 100 Strip/Pkt , Dialysis Starting Kit Disposable:A)Sterile Tray With Top(Disposable),Size Not Less Than 30X30cm B) Sterile Drape Size Not Less Than 45X45 Cm 1No C) Cotton Ball 6 No D)(D) Cotton Gauze Pieces 1,E) Artery Forceps-1 No (Disposable)),Consumable , Dialysis Starting Kit Disposable:A)Sterile Tray With Top(Disposable),Size Not Less Than 30X30cm B) Sterile Drape Size Not Less Than 45X45 Cm 1No C) Cotton Ball 6 No D)Cotton Gauze Pieces 1 , Diamond Marke Pencil , Digital Ball Watch Standard Company , Digital Thermometer , Digital Wrist Watch , Digital X Ray Film (Pack Of 100)),Film Size4 Inch X 17 Inch D , Digital X Ray Film -10X12 (150 Films/Pkt) , Digital X Ray Film -11X14 (150 Films/Pkt) , Digital X Ray Film -8X10 (150 Films/Pkt) , Digital X-Ray Film Size 14 X 17((100 Sheet Per Packet)),Film , Digital X Ray Film(Dihl(Pack Of 150)),Film 10 Inchx 12 Inch , Digital X-Ray Filimdigital X Ray Film(Dihl(Pack Of 150)),Size Of Film 8 Inch X 10 Inch , Digtital Thrmometer , Digtital Wrist Watch , Dim/.Wt. W215xh285xd150 Mm/2.85Kg Protable Pa Amplifier Systems Wa 320Dpr 20 Watts (Power Output 25 W Max Input – 2Xmic 2.5Mv,1Xaux 125Mv Tone Controls Bass + 4Db At 200 Hz, Treble+ 5Db At 10Khz Power Supply : Ac Mains, Dc 12V Car Battery,Dry Cells (8Xum-1) , Dimension W200xh240xd145mm , Dionised Water 5 Ltr Cane(Each),Consumable , Disinfectant Renaclean Cold Sterilant (5 Ltr Can) , Disinfectant Renasteril Hot Disinfectant (5 Ltr Can) , Disposable Appronpvcconsumable Full Size , Disposable Bed Sheet 60X90 , Disposable Cresent Knife(2.2Mm),Consumable , Disposable Cup For Urine-Sputum 30Ml 80 To 90 Mm Diameter 100/Pkt , Disposable Dust Mask - Jl246c Equivalent To N-95 Mask , Disposable Examination Gloves Made Of Natural Rubber Latex, Pre-Powdered, Non-Streile Medium , Disposable Examination Gloves Made Of Natural Rubber Latex, Pre-Powdered, Non-Streile Small , Disposable Examination Gloves Made Of Natural Rubber Latex, Pre-Powdered, Non-Streile, Size:- Large , Disposable Keratom Knife(2.8Mm),Consumable , Disposable Keratom Knife(3.2Mm),Consumable , Disposable Needle, 24G Surgical Material , Disposable Needles 22Gconsumable , Disposable Needles 23 No , Disposable Needles 26G X 1/2Consumable , Disposable Paper Gloves Size 7 Inches Consumable , Disposable Paper Gloves Size 7,1/2 Inches Consumable , Disposable Pricking Lancet (Pkt Of 200 Units)(Packet),Consumable , Disposable Pricking Lancet 100 Unitsconsumable , Disposable Scalp Vein Set Size 20 No , Disposable Scalp Vein Set Size 22 No(Each),Consumable , Disposable Sharp Collection Containers 1.5 L , Disposable Sharp Collection Containers 5 Ltr , Disposable Sideport Knife(Num),Consumable , Disposable Spinal (L.P.) Needle(25G),Surgical Material , Disposable Spinal Needle 18 No. , Disposable Spinal Needle 22 No. , Disposable Spinal Needle 23 No. , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized 6 Inch / Pair(Pair),Surgical Material , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized 7 Inch / Pair , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6.5 Inch / Pair(Pair),Consumable , Disposable Sterile Gloves Bis Specification Gloves, Surgical Rubber,Made Of Hypoallergic Latex 100%,Electronically Tested Sterilize No 7Inch/Pair(Pair),Consumable , Disposable Sterile Gloves Isi Marked Surgical Rubber Hypoallergenic Latex 100% Powder Free 7 1/2 Inc , Disposable Sterile Gloves Isi Marked Surgical Rubber Latex 100% Powder Free 6 Inches , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergenic Latex 100% Powder Free 7 Inches , Disposable Sterile Hypodermic Syringe 10Ml(Each),Consumable , Disposable Suction Catheter Assorted Covering All Sizes 10,12,14,16,18Consumable , Disposable Surgeon Cap(Box Of 100 Caps) , Disposable Syringe (For Vitamin K Inj)(1Ml With Needle 26G),Consumable , Disposable Syringe With Needle(20Ml Each),Needle , Disposable Syringe With Needle(2Ml Each),Syrings , Disposable Syringe With Needle(3Ml Each),Syrings , Disposable Syringe With Needle(5Ml Each),Needle , Disposable Three Layer Surgical Mask(Box Of 100 Mask) , Distilled Water (1X5 Lit),Consumable , Dialyzers Multiple Use Made Of Polysulphone Or Polyethersulfone Low/Middle Flux, Hi Performance Dialyser Performance Enhanced Technology With Hi Biocompatibility Housed In Medical Grade Polycarbonate Openable Ends For Easy Cleaning Caps(For Dialysate Inlet Utlet For Safer Storage Openable Caps(Red And Blue)Hi Quality Sterilisation Procedure Using Gamma Radiation And Should Meetings Standards Of European Ce/Iso13485:2003Sterlised),Consumable , Dj Stent For Ureter 6 Fr , Dj Stent For Ureter 8 Fr , Dm Water Pack Of 5 Litt Can , Domestic Hut 8.5 X 6 X 13 , Domestic Hut 8.5 X 6 X 13 , Door Matte Big Size Jooth (Sandard Quality) , Door Matte Big Size Plastic (Sandard Quality) , Door Matte Medium Jooth (Sandard Quality) , Door Matte Medium Plastic (Sandard Quality) , Double Blood Bag 450 Ml Cpda(Each),Consumable , Double Lumen Hoemodialysis Catheter With Pur Ext Tube , Double Lumen Polyurethane Cvp Catheter 4 To 5 Fr(Length 8 To 13 Cm, Each),Consumable , Dpx(1 X 250 Lit),Consumable , Dpx(1 X 250 Lit),Consumable , Drabkin Solution For Hb (1X5 Lit),Consumable , Drabkin Solution For Hb (1X5 Lit),Consumable , Draw Sheet Bleach 45 X 45 , Dressing Drum (Made Of Ss) (Size:-11X9) Standard Qualtiy , Dressing Drum (Made Of Ss) (Size:-9X9) Standard Qualtiy , Dressing Drum Ss Size 11X15 Standard Qualtiy , Dressing Drum Ss Size 6X6 Standard Qualtiy , Dressing Drum Ss Size 9X11 Standard Qualtiy , Dressing Trolley - Frame Work Made Of 1 Vertical M.S Pipe , Two S.S Shelves Over With S.S Railling On All Four Sides , The Trolley Fitted S.S Bucket And Bowl And Mounted On 4 Dia Castors.Over All Size 30Lx18Wx32H, Finish Pre Treated And Epoxy Powder Coated, Also Available In Complete S.S , Drop Bottle Plastic 500Ml , Droper 2Ml , Dura Patch (G.Patch)(10X12),Consumable , Dura Patch (G.Patch)(8X10),Consumable , Dustbin Foot Operated Plastic, Size 10Ltr, Isi Mark , Dustbin Without Foot Operated ,Size 5 Ltr,.Isi Mark , Dusting Powder, 10 Gm ( Neomycin Sulphate 5 Mg, Baccitracin 250 Unit, Sulphacetamide Sodium 60 Mg) , E.D.T.A. Vacunater With Needle(3 Ml),Consumable , Ea- 50 (Modified) (For Cytology)(1X125 Ml),Consumable , Ecg Paper (Chemical Coated)(80Mmx 20 Mtr Each),Consumable , Ecg Paper(Chemical Coated) 50Mm X 30 Mtr. Roll , Ecg Paper(Wax Coated) (50Mm X 30 Mtr, Roll),Consumable , Ecg Paper(Wax Coated) Heavy Quality 50Mm X 30 Mtr/ Roll , Economical & Compact , Edta K3 Vial Each , Edta Powder(250 Gm),Consumable , Edta Solutions K3 (150 Ml) , Edta Solutions K3 (500 Ml) , Edta Vial With Safty Cap (2Ml.) Capsule , Edta Vial With Safty Cap (2Ml.) Capsule , Ehrilichs Aidehyde Reagen (2X250 Ml),Consumable , Ehrilichs Aidehyde Reagen (2X250 Ml),Consumable , Electolyte Analyzer 3 P-Ise Based Technology Easy Selection Through Fuction Icon Of Key 100 Result Memory And Quality Contorol Option , Electric Geyser 10 Ltr Capacity Isi Marked , Electric Geyser 15 Ltr Capacity Isi Marked , Electric Led Troch Chargable , Electrolyte Solution A 250 Ml (250Ml) , Electrolyte Solution A 250Ml(250Ml),Consumable , Electronic Baby Weighing Machine Capacity 20Kg Resolution : 10 Gm Pan/Platform : 550Mmx300mm (Min) , Elisa Reader - 0.000-3.5 Abs Mesurent Range, 500 Test Programe & 10000 Result Store, Bichromatic Optic System With Plate Shaker, External Mouse For Easy Handing Large Touch Screen, Whole Plate Reading In Just 5 Sec , Elisa Reader & Washer Printer , Elisa Washer - 48 User Programmable Wash Protocoles, 8 Way/12 Way Manifold, Auto Calibration, Washes Flat Round & V-Bottom Well, Well Depth Detection , Emergency Cart , Emergency Drug Trolley/Crash Cart , Emergency Light Big Size , Empty Bottel 500Ml With Cap , Empty Bottle Droping 150 Ml , Endotracheal Tube Internal With Radioopaque Line(Dia 2.5 Mm To 5 Mm, Each),Consumable , Endotracheal Tube No 5.5(Uncuffed),Each , Endotracheal Tube No 6.0(Uncuffed),Each , Endotracheal Tube, Soft Cuff Towards The Distal End Kink Resistant Inflation Tube Murphy Eye At Distal End With Polished Smoothness Standard 15 Mm Connector Sterile, Single Use Curved Shaped Blister Pack-Suiting The Shape Of Product(Size 4 , Each),Tube , Endotracheal Tube,Soft Cuff Towards The Distal End Kink Resistant Inflation Tube Murphy Eye At Distal End With Polished Smoothness Standard 15 Mm Connector Sterile, Single Use Curved Shaped Blister Pack-Suiting The Shape Of Product(Size 3),Tube , Endotracheal Tubes Size 7 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue(25 Each),Consumable , Endotracheal Tubes Size 8 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue(25 Each),Consumable , Endotracheal Tubes Size 9 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue(25 Each),Consumable , Endotreheal Tube Size 4 Cuffed -Piece, Should Have Silicon Tube With Radio Opaque Blue Line , Enema 100 Ml (Sodium Acid Phosphate 10 Gm, Sodium Phosphate 8 Gm / 100 Ml) , Enema Appratus 1000 Ml Stainless Steel And Rubber Connection Tube Standard Qualtiy , Environmental Desontamintation System , Eosin 2% Solution (1X250 Ml),Consumable , Esbachs Reagent (125 Ml),Consumable , Ethanol (Abosolute Alcohol 99.9% (500Ml) , Eye Drape Disposable Towel (Size-70*70Cm Area 08*08),Consumable , Face Shield Protector Safaqi( ),Consumable , Factor Ix Deficient Plasma (Less Than 1%)(10X1 Ml),Consumable , Factor Vii Deficient Plasma ( Less Than 1%)(10X30 Ml),Consumable , Falcon Tube Plastic Contianers With Air Tight Cap , Fauchets Reagents (125 Ml),Consumable , Fdp Kit(4 Ml),Consumable , Feeding Tube (Catheter)(10 G, Each),Consumable , Female Reprodective System Complete , Femoral Catheters Single Lumen Set Adult(Size - 6F To 8F, Length 13 Cm To 15 Cm, Each),Consumable , Femoral Catheters Single Lumen Set Pediatric(Size - 3F To 4F, Length 13 Cm To 15 Cm Or Less),Consumable , Femoral Catheters Single Lumen Size Adult (Set Of 12 Different Sizes), Set , Femoral Catheters Single Lumen Size Size Pediatrics((Set Of 12 Different Sizes), Set),Consumable , Field Stain A 500Ml [5410005] , Field Stain B 500Ml [5410023] , Filter For Complete Pulmonary Function Testing (Including Dlco) With Body Box(100 Filters Per Pack, Consumable , Filter For Complete Pulmonary Function Testing (Including Dlco) With Body Box(100 Filters Per Pack, Make- Medisoft Sa),Consumable , Filter Paper No.1 Whatman , Filter Paper Sheet((Whatmann No 01) Pack Of 100 Sheets , Finish- Pre Treated And Epoxy Powder Coated , Finite Pump , Finite Pump , Fire Exjesting Cylander Abcd Type 5 Kg Complete , Fire Exjesting Cylander Refling For 5 Kg , Fistula 16G, Single Sterilizedsingle Needle Packing , Fistula 17G, Single Sterilizedsingle Needle Packing , Fistula Sterilized Twin Needle(16 G (Two Needle Pack)),Consumable , Fixer Powder (Bromex Acid Fixer With Hardner) ( 22.5 Ltr/Pkt) , Fixer: It Shall Be Powder Fixer To Produce Clean Radiographs Available In Pack Size Size:- 13.5 Ltr , Fixer: It Shall Be Powder Fixer To Produce Clean Radiographs Available In Pack Size Size:- 9 Ltr , Flask Glass Flat Bottam 1000Ml , Flask Glass Flat Bottam 500Ml , Flask Pyrex 500Ml , Flask White Glass Borosil 1000Ml , Flask White Glass Borosil 500Mg , Floor Cleaning 1000 Ml Isi Mark , Floor Cleaning Liquid Cleaning 5 Lit , Floride Vial With Sp Pack Of 100 , Flouride Solution (Pot.Oxalate 5% Flouride 1%) Pack Of 150Ml , Flow Regulator (Dial Flow)(Each),Consumable , Foetal Stethoscope Of Sk Sheal , Foldable Iol Sterile Lens Pc+14D(Lens-2),Pc+16D(Lens-3),Pc+18D(Lens-5),Pc+19D(Lens- 5),Pc+19.5D(Lens-5),Pc+20D(Lens-15),Pc+20.5(Lens-15),Pc+21D(Lens-13),Pc+21.5D(Lens- 11),Pc+22D(Lens-11),Pc+22.5D(Lens-5),Pc+23D(Lens-5),Pc+24D(Lens-3),Pc+26D(Lens-2)(100 Lens Per Box),Lens , Foleys Catheter Size 12-2 Way Consumable , Foleys Catheter Size 14-2 Way , Foleys Catheter Size 14-3 Way , Foleys Catheter Size 16-2 Way(11 Each),Consumable , Foleys Catheter Size 18- 2 Way , Foleys Catheter Size 20-2 Way(12 Each),Consumable , Foleys Catheter Size 22-2 Way(13 Each),Consumable , Foleys Catheter Size 24-2 Way(14 Each),Consumable , Foleys Urinary Catheter 2 Way Size 8 , Foleys Urinary Catheter 3 Way Size 16 , Foleys Urinary Catheter 3 Way Size 18 , Foleys Urinary Catheter 3 Way Size 20 , Foleys Urinary Catheter 3 Way Size 22 , Foleys Urinary Catheter Pediatrics Size 10 , Foleys Urinary Catheter Silkolatex 2 Way Sterile, Non Toxic Size 10 , Foleys Urinary Catheter Silkolatex 2 Way Sterile, Non Toxic Size 10 , Foleys Urinary Catheter Size 16 2 Way , Foleys Urinary Catheter(3 Way Size 12),Surgical Material , Foot Operated Sanitizer , Foot Sanitizer , Foot Step Double Steel Iron Standard Qualtiy , Forcepartery Sp Wells Cvd. 20 Cm/8” Standard Qualtiy , Forcepkocher Artery Cvd 8 “ Standard Qualtiy , Forcepkocher Artery Str 8 “ Standard Qualtiy , Forcep Allis Tissue 4 ?5Th20 Cm/8” Standard Qualtiy , Forcep Artery Mosquito Cvd 12.5Cm/5” Standard Qualtiy , Forcep Artery Sp Wells Cvd. 15 Cm/6” Standard Qualtiy , Forcep Dis Sectionplain Ss 17.5 Cm Standard Qualtiy , Forcep Dis Section Plain Ss 20 Cm Standard Qualtiy , Forcep Hysterectomystandard Qualtiy , Forcep Intestinalsize 16 Cm Standard Qualtiy , Forcep Intestinal Size 12.5 Cm Standard Qualtiy , Forcep Mousquito Str+Cvdsize: 12.5 Cm , Forceps Teeth Size 12.5 For Dressings.Steel , Forcepsplain Size 10 For Dressing S.Steel , Forcepsplain Size 12.5 For Dressings.Steel , Forcepsplain Size 17.5 For Dressings.Steel , Forcepsplain Size 25For Dressings.Steel , Forcepsteeth Size 10 For Dressings.Steel , Forcepsteeth Size 15 For Dressings.Steel , Forcepsteeth Size 25 For Dressings.Steel Standard Quality , Forceps Plain Size 15 For Dressings.Steel , Forceps Plain Size 20For Dressings.Steel , Forceps Teeth Size 17.5 For Dressing S.Steel , Forceps Teeth Size 20 For Dressings.Steel , Formaldehyde (Formalin)34% Acq 450 Ml Bottle , Formaldehyde 40% (Conc. Formaline)(1 X 30 Lit),Consumable , Formalin Chamber Internal Trays Sterdization Size 21X8X8.5Standard Quality , Formoline Solution 450Ml , Fouchets Reagent (100 Ml Bottle) , Fram Work Made Of Aluminum Tubes , Freedge 165 Litre , Freedge 220 Litre , Freq Resp.100-10 00Hz + 3Db , Full Bio Chemistry Analizer -200 Test/Hour, Staff Function, 60 Sample Positin With Refrigeration , On Board Wash Saction , 8 Interference Filters And 2 Position For Aptional, Photometric Range 0-3 Abs , Funnel , Funnel , G6pd Deficiency Test Kit - 10 Test , G-6Pdh (Quantitative Uv Kinetic (Liquistat Pack Of 15X1.1Ml (Span/ Tulip/ Erba) , Gauze Swab/Pad 4 Layer 10Cmx10cm , Gauze Swab/Pad 6 Layer 10 Cmx 10 Cm , Gauze Swab/Pad 6 Layer 20 Cmx 20Cm , Gentian Violet (Gram Stain) 100Ml Bottle , Giemsa Stain (Merck / Span) (125 Ml),Consumable , Glacial Acetic Acid (2.5 Liter),Consumable , Glass Beaker Cap.1000Ml , Glass Beaker Cap.500Ml , Glass Rod Size 12 Inch. , Glass Slide 75Mm X 25Mm 1.1 Mm [6120086] , Glass Slide 75Mm X 25Mm 1.35 Mm [987700] , Glass Slide With Isi Mark-At Least 75Mm X 25 Mm- Thickness At Least 1.1Mm,Detail Specifications-I-With Smooth Edges, Without Any Scrathtches. Ii-Glazed Glass.Iii-No Visual Or Chromatic Abbretions(50 Slides/Packet),Consumable , Glass Test Tube 12 X 100 (Medium Size) Heavy Quality 100/Pkt , Glass Test Tube 12 X 75(Small Size) Heavy Quality 100/Pkt , Glass Test Tube 5 Without Edge [987879] , Gloter Aldhiygde Solution Packge 1 Ltr , Gloves Latex Autoclavable 8 No (Pair) Made Of Natural Latex Micro Rough Finish For Better Grip , Gloy Size Board , Glucometer , Glucometer Cell , Glucometer Sprips (1X100) , Glucometer Strip (1X100) , Glucometer Strips 1 Should Be Able To Use Capillary Blood Samples 2 Should Have Expiry As Printed On The Label Of The Supplied Box(3 All Strips Should Have At Least One Year Expiry Date From The Date Of Supply 1 Glucometer Free With Each 1 Thousand Strips Rate Should Be Quoted For ,Consumable , Glucose600 Ml(Model Ba 400 System Consumable , Glucose Kit (God/Pod)(350Ml),Digonstic , Glutaraldehyde Solution 2% In 5 Litre Can (2 Strips/Vials Per Each Can)(5 Litre Can),Consumable [700591] , Gold Chloride (1X1 Gm),Consumable [710056] , Goods Carrying Vehicle. (Size 48X24X24) Four Wheeler , Gpt (Ast) Kinetic (Liquistat) Pack Of 10X10ml , Gram Iodine (Gram Stain) (100Ml Bottle)(Bottle),Consumable , Gram Iodine (Gram Stain) 125 Ml , Gram Staining Kit (Crystal)(125Ml X 4),Consumable , Grasper- Laparoscopic 5Mm Straight 360 Degree Rotating With Insulated Shaft, Toothed A Traumatic Grasper With Ratchet Mechanism, Plastic Grip(36 Cms Length, Independently Moving Jaws),Consumable [720068] , Gynec Sheet 80 X 48 Standard Pvc Quality , Gypsona 4” , Gypsona 6” , Haby Gum Boot , Haematoxyline Solution (Harris)(1X125 Ml),Consumable , Haemoglobi Pippate(Pippate),Consumable , Haemoglobin Tube(Tube),Consumable , Haemoglobino Meter (Sahilmathard) , Half Volume Pt And Aptt Testing , Hand Sanitizer With Pump(500Ml),Bottle , Hand Wash Liquid Cleaning Standard Company , Handpiece(Blue),Consumable , Handpiece(Transducer),Each , Hb Colour Scal Book , Hb Electrophoresis(200 Test),Consumable , Hba 1 C (Glycosylated Hb)(100 Tests),Consumable , Hba Ag Elisa 96 Kit 1X96(Each),Consumable , Hba Ag Rapid Card Test(Each),Consumable , Hbnc Kit Complete - , Hbs Antigeng Kit Card(Pack Of 10 Card Test With 10 Dropper, 1 Buffer Solution, 10 Pricking Lancet And 10 Alcohol Swab),Digonstic , Hbsaganigine Kit Card(Pack Of 10 Card Test With 10 Dropper, 1 Buffer Solution 10 Pricking Lancet And 10 Alcohol Swab) J Mitra/ Span/ Tulip , Hbv Elisa Test Kit Pack Size : 96 Wells Per Kit(Rate Should Be Quoted For 1Kit Containing 96 Wells),Consumable , Hbv Rapid Test Kit Quantity Is In No. Of Test Card Only(And Rate Should Be Quoted For One Test Card),Consumable , Hcl N/10 (500 Ml Bottle) , Hcv Kit Card Test(25 Test / Kit),Digonstic , Hcv Rapid Test Card Single Test (J Mitra/ Span/ Tulip) , Hdl Kit 50 Test [987882] , Hdl Kit Ppt(2X50ml 200 Test/Kit),Consumable [987760] , Hdl/Ldl Standard(1X1 Ml),Consumable [710063] , Hdpe Jar 5 Litt With Cap , Heamstrips (Oc , Hematology Cell Counter Reagents Dilutent (20 Ltr) , Hematology Cell Counter Reagents Rinse Solution (20 Ltr) , Hemoostasi Analyzer , Hemotocyto Meter,Consumable , Hiv 1&2 Test Cards , Hiv 1+2 (Rapid) Per Card (J Mitra/ Span/Tulip) , Hiv 1+2 (Rapid) Per Card J Mitra , Hiv Rapid Test Card Single Test (J Mitra/ Span/ Tulip) , Hospital Bed Ss With Mattress , Hot Air Oven 14X14X14 , Hot Water Bagstandard Company , House Hold Referigerator Double Door Isi 265 Litt , Hub Cutter- Non Electric Lockable Safety Portable Box For Disposal Of Hypodemic Needles.Consumable , Human Albumin 20%(50 Ml Vial Ffs Glass Bottle),Bottle , Hydrochlorid Acid(Hcl) N/10 (500 Ml Bottle) , Hydrogen Peroxide (Conc.) H2o2 (500 Ml),Consumable , I.V Stand 4 Legs Base , I.V. Cannula With Injection Valve(Size 24 G),Consumable , Ice Gel Pack (200&500Gm) , Id Wrist Band(Identification For Mother/Child Specific Colour)(Wrist Band/No),Consumable , Immersion Oil (Refractive Index Of 1.48. It Should Be Colourless,Odourless, Transparent, Free From Fluorescence In Day Light With Realtive Density Of 0.827 To 0.890, Visosity Of 110To Gravity Of 76-0.78 At 15.5 C , Immersion Oil Lens (All Type) , Incubater B.O.D , Incubator , Incubator Digital Microbiological , Indicator Sol, For Ph (Litmus Sol) (1X500 Ml = 500 Ml),Consumable , Infant Feeding Tube (Catheter) Size: 3G , Infant Feeding Tube (Catheter) Size: 4G , Infant Feeding Tube (Catheter) Size: 8G(Each),Consumable , Infant Feeding Tube Size: 5G , Infant Feeding Tube Size: 6G , Infant Feeding Tube(10 G Each Piece, Each),Consumable , Infant Feeding Tube(7G Each Piece, Each),Consumable , Infant Mucus Extractor Sterile Pvc(Each),Surgical Material , Infant Weing Scal With Bag , Infantometer , Infusion Pump Features :- Front Load Of Yringe , Automatic Detection Of Syring, Bolus And Purge Facilty , Self Illutrative Contorl Panel , Syring Capacity , 10Ml-300Ml/Hr.20Ml-500Ml/Hr , Input – Mic-1:3Mv, Mic-2:3Mv, Aux: 100Mv 800Mv Rec. Output 800Mv Tone Controls Bass : + 6Db At 80Hz, Treble :+ 6Db At 8Khz Power Req. 220-240V Ac 50/60Hz, 12V Car Battery 12V.3.5Ah Rechargeable Battery Dim/.Wt. W215xh285xd150 Mm/4.65Kg , Input Channels : Built –In Microphone , Instrument Tray Ss With Cover 10X8 Standard Company , Instrument Tray Ss With Cover 15X12 Standard Company , Instrument Trays With Cover Ss Size: 10 X 12 Standard Company , Instrument Trays With Cover Ss Size: 7 X 11 Standard Company , Instrument Wash 500Ml With Spray Pump , Insulated Container , Insulin Syringe(Each),Consumable , Intra Venous Set (Adult) With Airway And Needle Standard Company , Intra Venous Set (Child) With Airway And Needle Standard Company , Intracath Cannula For Single Use (Intravascular Catheters) Bis(Gauze 22, Length 25),Consumable , Inverter Battery 500 Watt 150 Ah Isi Mark , Inverter With Battery 1000 Va [One Battery Required]Isi Mark Standard Companywith Installation , Inverter With Battery 1500 Va [Two Battery Required]Isi Mark Standard Companywith Installation , Invertor Batteryisi Mark 150 Vah , Iol - Made By Repated Company, Eto Sterlized, Powernon Foldable Iol Sterile Lens Pc+14D (2), Pc+16D (3) Pc+18D (5), Pc+19.5D (5), Pc+20D (15), Pc+20.5D(15), Pc+21D (13), Pc+21.5D (10), Pc+22D (10), Pc+22.5D (5), Pc+23D(5), Pc+24D(3), Pc+26D (2), Ac+19D (2) (No), Single Price(Standard Company) , Iron Bed Size 5X2.6 , Iron Box 5’X2.5’X2.5’’ , Iron Box 6’X3’X3’’ , Iron Stand With Belding Work , Isoflurane(250 Ml Amber Color Bottle),Inhalation , Isopropyl Alcohol (Propanol)(1 X 2.5 Lit),Consumable , Iv Cannula Size With Inj.Valve (Port)(18G ), Consumable , Iv Cannula Size With Inj.Valve (Port)(22G ), Consumable , Iv Cannula With Inj Valve(18G),Consumable , Iv Cannula With Inj Valve(20G),Consumable , K Wire(Length 375Mm Size:1.6Mm Roll),Consumable , K Wire(Length 375Mm Size:1.8Mm Roll),Consumable , K3 Blood Vaccutainer Edta-100 Tubes/Pkt , Keratome 3.2 Keratome Round Stock 3.2Mm Full Handle Knives E.T.O. Sterile Angled Bevel Up 45 Deg( ),Consumable , Knife Blade All No Pack Of 100 , Kit For Total Protein (Including Albumin And Total Protein) 100Ml Bottle , Lab Coat , Labour Room Tray 12”X10” , Labour Room Tray 15”X12” , Labour Table 3 Fold Ss With Foam Mattress, , Labour Table Manul , L-Alanyl L-Glutamine Solution For Infusion (20%W/V)(Each),Consumable , Larrynoscope Set With Four Blades (Adult) , Larrynoscope Set With Four Blades (Infant) , Larrynoscope Set With Four Blades (Paediatric) , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 14-3 Way),Consumable , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 16- 2 Way Each),Consumable , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 18- 2 Way, Each),Consumabl , Latex Based Baloon Capacity (3Ml) Foleys Urinary Catheter Peadiatrics(2 Way Size 8, Each),Consumable , Latex Based Baloon Capacity (3Ml) Foleys Urinary Catheter Peadiatrics(Size 10 , Each),Consumable , Latex Examination Gloves (Large) (100/Pkt)(Packet),Consumable , Latex Examination Gloves (Small) (100/Pkt)(Packet),Consumable , Latex Examination Gloves(Medium),Consumable , Lcd Projecter , Ldh Kit Pack (50 Ml Bottle),Consumable [700603] , Lead Letter 0-9 Sets (100 Clips/Pkt) , Leishman Stain (500 Ml Bottle),Consumable , Leishmann Stain Sol With Buffer Tablet Ph (1X5 Lit),Consumable , Lens Cleaning Paper , Lenstip(1 Each),Consumable , Lenstip(1 Each),Consumable , Life Boy Soap , Life Boy Soap 100Gm , Light Weight Composite Mesh : Polypropylene Andpolyglycolic Acid Partially Absorbable Composite Mesh With Large Pore Size 6 X 11 Cm , Liquid Hand Wash , Liquid Hand Wash Solution With Dispenser Consumable(500 Ml),Consumable , Liquid Paraffin 50Ml(Bottle ),Consumable , Liquid Senitzed (Hand Antiseptic) , Liquor Ammonia (500 Ml),Consumable , Long Body Suit -Non Woven Fabrie , Long Line Silicon Catheter, G-24, Fr-2, L-30Cm , Low-Profile Titenium Chemo Port With Cilicon Catheter (9.6 Fr, 6.6Fr, 3.9Fr,) Length -60Cm,Guide Wire, Peel-Away Desilet,Hubsite Needle(22G*20Mm) , Lugols Iodine Pack Of 100Ml , M-30-D-Diluent(20Ltr),Consumable , M-30-R-Rinse(20Ltr),Consumable , Macconckeys Agar(500Grm),Consumable , Macconckeys Agar(500Grm),Consumable , Mackintosh Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr , Macro Porous Tissue Separating Multi Layered Partially Absorbablemesh With Oxidized Regenerated Cellulose, Polydioxanone And Soft Polypropylene Mesh(Size 15 Cm X 15 Cm),Consumable , Macro Porous Tissue Separating Multi Layered Partially Absorbablemesh With Oxidized Regenerated Cellulose, Polydioxanone And Soft Polypropylene Mesh(Size 15 Cm X 20 Cm),Consumabl , Malaria Antigen Pv/Pf Single Test , Malaria Rapid Stain Kit (Jsb I&Ii) One Minute Stain For Blood Parasite) Pack Of 2X500ml , Male Reprodective System Complete Standard Company , Malleable Splirls (X-Ray Through The Splints Fixing Of Splint Is By Zipper Or Belt Distal End Left Open To Expose Toes Should Be Washable And Reusable) , Mammanatallie Standard Company , Manometer And Flo Meter For Oxygen Cylinder , Maryland Dissector- Laparoscopic 5Mm Curved Maryland Dissector With Tapering End, 360 Degree Rotating With Insulated Shaft, Non Ratchet , Plastic Grip(36 Cms Length, Monopolar Pin Provision For Usage With Electro Surgical Unit, Independently Moving),Consumable , Masson Trichrome Staining Kits(100 Test),Consumable , Match Box , Mattres Cover Complete Size L.6.5Fxw3.5Fxt5.5F Inch , Mattress Coir With Foam Topping Plain Cloth Cover Size 72X36x4 Thik With Ragzine Cover , Medical Nitrous Oxide Gas In Jambo Size Cylinder(D Type),Miscellaneous , Medical Nitrous Oxide Gas In Medium Size Cylinder(B Type),Miscellaneous , Medical Nitrous Oxide Gas In Small Size Cylinder(A Type),Miscellaneous , Medical Oxygensteel /Aluminium Cylinder (10 Litres Water Cap) With Gas Specific Pin System(10 Liters),Inhalation , Medical Oxygen Gas Ip In Jambo Size Cylinder(D Type),Miscellaneous , Medical Oxygen Gas Ip In Medium Size Cylinder(B Type),Miscellaneous , Medical Oxygen Gas Ip In Small Size Cylinder(A Type),Miscellaneous , Medical X-Ray Film-Polyester Based Imaging Film 30.5 Cm X 30.5Cm (12X12) Size:- 50 Sheets In One Packet , Medical X-Ray Film-Polyester Based Imaging Film 35.6 Cm X 43.2Cm (14X17) Size:- 50 Sheets In One Packe , Medical X-Ray Film-Polyester Based Imaging Film 35.6Cm X 35.6Cm (14X14) Size:- 50 Sheets In One Packet , Medigard Hand Scrub [987893] , Messuring Cylinder 1Ltr With Spout , Mesuring Cylinder Pack Of 100Ml , Mesuring Cylinder Pack Of 1Lit With Spout , Mesuring Cylinder Pack Of 500Ml , Methanol(Acetone Free) For Leishman Staining (1X2.5Lit) , Methanol Pack Of 5Ltr , Methylaled Spirit , Methylate Spirit (Sep.Chemical Name Ethanol Denatured+5% Isopropyl Alcohol+5%Methanol, Molecular Structure : C2h50h Molecular Wt: 46.07 Purity : 90% , Methylene Blue 25Gm Dye Content 82% , Methylene Blue Pack Of 500Ml/Gram (Dye Content+42% Sepc.Chemical Name: Methylthionine Chloride, Chemical Structure: C16h18c1n3s,Molecular Wt: 319.9, Dye Content: Approx 82% (Should Be Available On The Container) , Metresses 3X6 With Raxine Cover 4 Densit , Micro Drip Set , Micro Pipet 1000 Fix And Variable Each , Micro Tips Big Pack Of 1000 Pices , Micro Tips Big Pack Of 500 Pices , Micro Volume Drip Set , Microalbumin Urine(100 Tests),Consumable , Micronthik Bag 10 Lit. , Micronthik Bag 30 Lit. , Micronthik Bag 5 Lit. , Micronthik Bag 50 Lit. , Micropiptte 100-1000 , Microscope With Digital Display And Having Magnification , Microsurgery Speciality Gloves(Size 6.5),Lens , Microtips (2-200 Ul) 1X1000(Each),Consumable , Milkiwhitegel Based Sanitizer1.Ethinol (Cas-64-17-5) 58-62% 2. Benzoil Coline Chloride 0.52% 1 % 3. Ph Neutral Contact Time 15 Sec 4.(Pack Size L& 500 Ml With Dispensor),Consumable , Mindray Bc 5300, Auto Hematology Analyzer Part -5(M- 53Diluent),Consumable , Mindray Bc 5300, Auto Hematology Analyzer Part -5(M- 53Leo (Ii) Lyes),Consumable , Mindray Bc 5300, Auto Hematology Analyzer Part -5(M- 53Lh Lyes),Consumable , Mixed Oxidant Disinefction Genration System , Mixi Isi Mark , Mobile Operatinglight Single Dom , Mobile Operating Light Double Dom , Mobile Operating Light Four Dom , Mobile Operating Light Three Dom , Modular Automitic Blood Culture System , Mopping Pad , Motorcycle Pa Amplifier Set (Mpa-40S) (Spc. Power Output16 W Rms At 10% Thd/22W Rms Max, , Motorized Ot Table With Chair For Ophthalmology , Mtp Cannulas Standard Company , Mva Kit (Mannual Vaccum Aspiration Kit) , Mva Kit (Mannual Vaccum Aspiration Kit) Consumable , N-95 3M Disposable Raspirator(Without Valve Ffp2),Consumable , N-95 3M Inv Disposable Raspirator(With Valve Ffp2),Consumable , Nah2 Po4 (Anhydrous) Analar / Gr/Ar (1X500 Gm = 500Gm),Consumable , Nasal Catheters Child Size Disposable Nasal Prongs , Nebulization Mask - Kit (Pediatrics) , Nebulization Mask-Kit (Adult) , Nebulize Compressor. Piston Model, Fitted With Small Fan, Nices Less 60 Decible, Nebulizer Chamber Autoclave, Particle Size Between 0.5 To 5 Micron Suitable For Adult And Pediatric Patient. Resptrable Particle Above 60, Tor 300 Mg/Min , Needle And Syringe Destroyer Electrically Operated , Needle And Syringe Destroyer Manually Operated , Needle Holder Laparoscopic 5Mm Straight Reusable Needle Holder With Ratchet Mechanism With High Quality Tungsten Plated Jaws For Enhanced Needle Grip(36 Cms Metal Shaft),Consumable , Needle Hypodermic Size 23 G , Needle Hypodermic Size 24G , Needle Hypodermic0insulin (Metallic Non0sterile) Needle , Neomycin And Sulfacetamide Sprinkling Powder 5 Gm(Each),Consumable , Neonatal Infant Weighing Scal With Sling , Neonatal Urine Collector Bag 50 Ml , Neubauers Chamber(Each),Consumable , Nibp (Non Invasive Blood Pressure) Multi Channel Monitor) , Nitrous Oxide Cyilnder , Non -Contact Rapid Temperature Measurment System-Screen 2.8 Inch Tft Screen, Infrared Resolution Size 160X120, Frame Rate 9Hz, Temperature Measurment Range 30 Dig.C-45Dig.C, Accuracy + 0.5Dig.C, Distance 1M. Measuring , Storage - Take And Store Photos To Sd Card , Software Pc Analysis Software, Battery - Rechargeable 3.7V/5000Mah Lithium Battery. 22650 Single Cell, Battery Working Hrs- Up To 6Hrs.To Escort Your Continucous Work, Weather Proof, Nycocard Reader -Up To 2M, Tripod Mounting Hole 1/4 Inch, Hba1c, Microabumin, D-Dimer, C-Reactive Proteins , Non -Invasive Ventilaor (Sponteneous And Timed) , Non Tuch Thermo Meter , Nuclear Stain Rapid Pap Pack Of 500Ml , Nutrient Agar(500 Grm),Consumable , Nylon Suture Spatulated Micropoint Reverse Cutting Needle, Double Armed Suture Size 9-0(12 Foils/Pkt),Suture , Obsteric Labour Talbe Mechacally :- Sep- Frame Work Made Of Heavy Ms Crca Tubular Pipe.Stainless Steel Top In Two Section , Back Rest Section Adjustable On Retched System, Trendleburg Position Adjustable On Screw Mechanism By Handle. Supplied With Waste Collecting , S.S Bowl On S.S Bracket And I.V Rod , Height Adjustable A Pair Of Leg Holders With Straps, Complete With Self Locking Traction Handle I.V Rod , Overall Size 72 Lx27Wx30H Cms.Finish Pre Treated And Epoxy Powder Coated.Also Available In Complete S.S , Occult Blood Test Kit (Haem Test Kit) (1 X 100 Strips),Consumable , Og6 (For Cytology)(1X125 Ml),Consumable , Operating Microscope For Ent (Imported) , Ophthalmo Scope Direct , Ophthalmo Scope In Direct , Orthopaedic Speciality Gloves(Size 7),Consumable , Orthopaedic Speciality Gloves(Size 7),Consumable , Overall Size 48Lx24Wx24H , Oxalic Acid , Oxidisedcellulose Absorbable Hemostate( 2X3),Consumable , Oxidisedcellulose Absorbable Hemostate(2X14),Consumable , Oxidisedcellulose Absorbable Hemostate(4X8),Consumable , Oxidised Regenerated Cellulose Absorbable Hemostate(1X2),Consumable , Oxidised Regenerated Cellulose Absorbable Hemostate(2X4),Consumable , Oxidised Regenerated Cellulose Absorbable Hemostate(4*4),Consumable , Oxygen Conentrator , Oxygen Cylinder (It Should Be A Standard ‘J’ Type Molybdenum Steel Cylinder To Fill Medical Oxygen The Capacity Should Be Of 5000 To 6000 Liters (5To6m3) At A Pressure Of 1800-2000Ibs/Inch2, A Pressure Regulator Capable Of Reducing The Pressure To Appropriate Level To Run Either A Ventilator Or Provide Oxygen Therapy With A Flow Meter Should Be Provided , Oxygen Cylinder Flow Meter , Oxygen Cylinder Gauze-1 , Oxygen Cylinder Gauze-2 , Oxygen Cylinder Gawge Valum , Oxygen Cylinder Jumbo Size Complete Set , Oxygen Cylinder With Instrument Set For Oxygen Delivery B Type,Make-Everest Kanto Cylinder Limited;(Model- Everest;Country Of Origin-India),Consumable [75001] , Oxygen Cylinder With Instrument Set For Oxygen Delivery D Type,Make-Everest Kanto Cylinder Limited;(Model- Everest;Country Of Origin-India),Consumable [75002] , Oxygen Humidifier , Oxygen Inhelation Mddial Oxygen Steel Aluminium Cylinder 10 Ltr( ),Consumable , Oxygen Mask Adult (Standard Size) Standarad Company , Oxygen Mask Paediatric (Standard Size) Standarad Company , Oxygen Nasal Cannula(Neonatal),Consumable , Oxygen Nasal Canula (Neonatal) 7 White Colour Tubing And Threaded Nut(25 Pcs/Pkt),Consumable , P.P.T 1.5 Tu Tubercullin Vial 5 Ml , P.P.T 10 Tu Tubercullin Vial 5 Ml , P.P.T 2 Tu Tubercullin Vial 5 Ml , P.P.T 5 Tu Tubercullin Vial 5 Ml , Paediatric - Double Lumen Catheter Set 6.5 F - 8.5 Fr, 13Cm (Curved), Kit , Paediatric - Double Lumen Catheter Set 6.5 F - 8.5 Fr, 13Cm (Straight), Set , Paediatric Drip Set(Set),Digonstic , Paediatric Epidural Set(19G Needle, Metal Stylet,22G Catheter,0.22Micron Epidural Catheter Lor Syringe , Paper Adhesive Microporous Surgical Tape 3 Inch X 5 M / Roll (10 Roll/Pkt)(3 Inch X 5 M / Roll (10 Roll/Pkt)),Consumable , Paper Adhesive Plaster 1 X 9.0Mts , Paper Adhesive Plaster 1/2 X 9.0Mts , Paper Adhesive Plaster Microporous Surgical Tape 1 Inch X 9 M / Roll , Paper Adhesive Plaster Microporous Surgical Tape 2 Inch X 5M /Roll , Paper Adhesive Plaster Microporous Surgical Tape 4 Inch X 9 M / Roll , Paper Adhesive Plaster Microporous Surgical Tape 6 Inch X 10 M / Roll , Paper Adhesive Plaster Microporous Surgical Tape 6 Inch X 5M /Roll , Para Film Sealing Film (Parafilm 100Mm Widht, 58M Length, For Use Between 40 Dgree C To 50Dgree C , Paraffin Strips , Patch Buprenorphine(10Mcg),Consumable , Patch Buprenorphine(20Mcg),Consumable , Patented Ball Method Technology For Extermely Reproducible And Realiable Result , Patented Ball Method Technology For Extermely Reproducible And Realiable Result , Patient Bed Powder Coted Size 84Lx36Wx24H , Patient Gown Standard Size , Patient Stool , Paracaine Eye Drop , Pediatric Chamber Set 100 Ml , Peledi , Ph Meter Digital For Water , Phenol Crystal 500Ml Purity 99.5% , Phenyal 40% /Phanolic Solution 40% , Phenyl - As Per Schedule O (Grade 1) 10 Lt Jar(Isi Marked),Consumable , Phenyl 40% , Photo Therapi Unit Double Surface , Photo Therapi Unit Single Surface , Pipete Graduated 0.2Ml , Pipett Graduated 2.0 Ml To 10Ml , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The Following Shaft Lengths 23 Cm. Can Seal Blood Vessels Upto And Including(5Mm In Diameter),Consumable , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The(Folloeing Shaft Lengths 36 Cm Can Seal Blood Vessels Upto And Including 5 Mm In Diameter),Consumable , Plain Disposable Vial 3Ml(Each),Consumable , Plain Vial With Screw Cap (12X75),Consumable , Plain Vial With Screw Cap(12 X 75),Consumable , Plaster Of Paris Bandage 10 Cm X 2.7 Mtr / Roll(Roll),Bandage , Plaster Of Paris Bandage Bp 10 Cm X 2.7 Mts/Roll Standard Company , Plaster Of Paris Bandage Bp 15 Cm X 2.7 Mts/Roll Standard Company , Plaster Of Paris Pack Of 5Kg , Plastic Bottle(300Ml),Consumab Empty With Cap , Plastic Bottle(500 Ml),Consumable Empty With Cap , Plastic Box 9X3.5’X3’’ , Plastic Box 9X6’X6’’ , Plastic Box Supirior Quality 10X7x4 , Plastic Box Supirior Quality 9X6x4 , Plastic Bucket Black 20 Ltr , Plastic Container With 2Lt Cap , Plastic Tanki 500 Ltr. For Water (3 Layerd, Standard Quality, Manu.By Reputed Company) , Plastic Thaila 18 Lengthx 16 Widex 8 Thickness , Platelet Dilution Fluid (100 Ml Bottle) [700193] , Poliglactinsuture1-90Cm (Vicryl) , Poliglactin Suture1-110Cm (Vicryl) , Poly Bag Black 16X18’’ , Poly Propylene Mono Filament Sterile Precut With 1/2 Cir Rb(Needle 30 Mm Length 70 Cm Non Absorbable Surgical Sutures Usp Size 1/0),Surgical Material , Polycarbonate Goggle- Material Plastic(Uv-Protection, Lens Thickness 1-2 Mm, Weight-40-50G),Consumable , Polyethylene High Pressure Extension Tube, Length - 100Cm , Polyethylene High Pressure Extension Tube, Length - 150Cm , Polyethylene High Pressure Extension Tube, Length - 200Cm , Polyglactin 30 Mm 1/2 Circle Round Body 90 Cm Size 1/0(12 Foils/ Pkt),Consumable , Polyglyconic Suture 110 Cm Vicryl No.2-0 Pack Of 12 Foils , Polyglyconic Suture 190 Cm Vicryl No.1 Pack Of 12 Foils , Polyglyconic Suture 190 Cm Vicryl No.1-0 Pack Of 12 Foils , Polypropylene Size - 1, (12 Foils/Pkt)(1/2 Cir Rb Needle 45 Mm, Length 90 Cm ),Needle , Polypropylene Size-2/0 (12 Foils/Pkt)(1/2 Cir Rb Needle 25Mm, Length 45 Cm),Needle , Polythine Whit Standard Quality(Weghting Capicty 500Gm To 20Kg) , Poocha Long Cloth Standar Size , Popete Stand Glass Large Size , Post Operative Bag With Window Size 100 Mm(1 Each),Consumable , Post Operative Bag With Window Size 70 Mm(1 Each),Consumable , Postmartem Gloves , Postmartem Set , Potassium Permanaganate , Powder Developer Suitable For Processing Medical X-Ray Films. One Developer Box Shall Contain Part A And Part B Which Are Mixed At The Time Of Preparation Of Solution Of Specific Capacity Size:- 13.5 Ltr , Powder Developer Suitable For Processing Medical X-Ray Films. One Developer Box Shall Contain Part A And Part B Which Are Mixed At The Time Of Preparation Of Solution Of Specific Capacity Size:- 9.0 Ltr , Ppe (Personal Protective Equipment)(Full Body Suit With Shoe Cover Free Size, Gloves, Face Sheeled, Goggle Consumable , Ppe Kit Consumable , Pregnancy Detection Kit Ce Marked/Isi Marked 30 Test/ Kit , Pregnancy Test Card For Urine Test Single Cared , Pregnancy Test Card(10 Card Pack,Consumable , Pregnancy Test Strips For Urine Pack Of 100 Strips , Pregnant Stage And Reprodective Dumy , Presure Cukker 05Lrt , Presure Cukker 07Rt , Presure Cukker 10Lrt , Prinking Needle Pack Of 100 Pices , Prinking Needle Pack Of 200 Pices , Procedure Table , Protable Pa Amplifier Systems Wa 620 Dpr 25 Watts (Power Output 25 W Max Input – Mic-1:3Mv, Mic- 2:3Mv, Aux: 100Mv 800Mv Rec. Output 800Mv Tone Controls Bass : + 6Db At 80Hz, Treble :+ 6Db At 8Khz Power Req. 220-240V Ac 50/60Hz, 12V Car Battery 12V.3.5Ah Rechargeable Battery , Protable Pa Amplifier Systems Wa 625Dpr 25 Watts (Power Output 25 W Max , Protection Suit And Gloves( ),Consumable , Protein (Total) 600 Ml(Model Ba 400 System Consumable , Protein Electrophorosis In Blood (Serum) ,Urine ,Csf(200 Test),Consumable , Protien& Albumine (Total) Biuret And Bcg , Protien (Urine) Ba 400 Biosystems Diagnostics Pvt Ltd(240 Ml),Consumable , Pt Kit (Time) (Ist 1.00 - 1.20)(2X4 Ml),Consumable , Ptah Staining Kits(100 Test),Consumable , Public Addressing System , Pulse Oximeter Finger Tip , Pulse Oximeter Table Top , Purified /Distilled Water- Laboratory Grade , Pyrethrum Extract 2%(25 Litre Drum) , Quick Diff Staining Kits For Pap Smear(100 Test),Consumable , Ra Factor 50 Test Kit Qualicative [987764] , Rapid Ra 25 Test , Rbc Dialuation Fluid (500 Ml Bottle),Consumable , Reaction Rotor 10 Pc(Model Ba 400 System Consumable , Reagent Bottel Glass 5Lit , Reagent For Hdl Cholestrol Test(100 Ml (4 X 25)),Consumable , Refling Oxygen Cylande Jumbo Large , Refling Oxygen Cylander Medium , Refling Oxygen Cylander Small A Type , Refrigerant Compressor (Copeland Usa Maneurop ) , Refrigeratedwater Bath , Refrigerated Chillers With Cooling Tank System (2 Tr, Air Cooled Water Chiller) , Reseant Bottle 1000Ml Empty , Reseant Bottle 500Ml Empty , Resusciatation Set With Infant & Neonatal Mask , Retinoscope , Revolving Computer Chair , Revolving Stool 4 Leg , Ria Vail 12X75mm Pack Of 100 , Rib Belt Large(Mfg By - Precious Life Care),Each , Rib Belt Medium(Mfg By - Precious Life Care),Each , Rib Belt Small(Mfg By - Precious Life Care),Each , Rna Extraction Kit - Icmr Certified Kit(250 Test),Consumable , Rolled Bandage 7.5Cm Ͻ 5M , Rolled Bandaze 10 Cm X 5 Mtr. , Rolled Bandaze 15 Cm X 5 Mtr. , Rolled Bandaze 5 Cm X 5 Mtr. , Rolled Bandaze 7.5 Cm X 5 Mtr. , Room Coolersize-21X19X36Isi Mark 16 Fan & Pump With Gi Sheet Body , Room Heater Hot Air Blower 2 Kw , Rpr Rapid Card Test Kit (50 Test/Pkt) , Rpr Test Kit(100 Test),Kit , Rpr Test Kit(100 Test),Kit , Rubber Bands All Assorted Sizes , Ryles Tube (Pvc) Size : Adult16-18 ) , Ryles Tube (Pvc) Size : Children: 10-12 , Ryles Tube(Size 14 Each Piece),Consumable , S Direct Billirubin(1000 Ml),Consumable , Salt Testing Kit(As Per Attached Specification , Kit),Consumable , Sanitary Napkins ,Consumable , Scessior Stainless Steel 8: , Scessior Stainless Steel 9: , Schiotz Tonometer , Schirmer Strip For Ophthalmic Use , Scissor Dressing Str/Cur Ss 12.5 Cm , Scissor Dressing Str/Cur Ss 15 Cm , Scissor Dressing Str/Cur Ss 17.5 Cm , Scissor Mayo Str/Cur Ss 16 Cm , Scissor With Round Trap , Scissors Mayo Fine. Cvs 16.5 Cm/6.5” , Scissors Mayo Fine. Str 16.5 Cm/6.5” , Scissors Str + Cvd Size 10 Cm Cutical , Seenk Jhadoo (Standard Size) , Self Adhesive Drainable Stoma Bag For Colostomy & Illeostomyâ - Double Layered Self Adhesive With Flex Patern, Transparent Drainable Stoma Bag With Built In Filter And Velcro Outlet(Size 76 Mm),Consumable 1-Pc , Seman Diluting Fluid 100 Ml. , Semi Auto Analyzer Ce Certified Minimum 1 Year Free Service Warrenty Remi/Erba/ Ranbaxy , Sencer Senitizer , Senior Executive Chair Foam With Leather Standard Company , Senstivity Disk , Serological Water Bath With Digital Temprature Display Size 605X300x150mm , Serum Amylase(100 Ml),Consumable , Serum Creatinine (100 Ml Bottle (2 X 50 Ml))(Consumable),Consumable , Serum Electrolite Na+ K+ Kit Analizer(50 Test Per Kit),Consumable , Serum T3 Kit, Elisa(96 Test Kit Each),Consumable , Serum T4 Kit, Elisa(96 Test Kit Each),Consumable , Serum Tsh Kit, Elisa(96 / Pkt),Consumable , Sessior 8 Inch Steal , Sevoflurane 20Cc(Each),Consumable , Sgot Kit (Kinetic) 5X20ml 200 Test/Kit , Sgot(25 Ml),Consumable , Sgpt Kit Lyphozyme 5X20 Ml , Sgpt Test Kit Reagent , Sgpt(100 Ml (4 X 25)),Consumable , Shadowlessceiling Light: 28 Dome With Seven Reflector Each Fitted With A Halogen Bulbe And Spherical Filter Glass Ensuring Shadow Free Corrected And Cool Light With A High Intensity Of Illumination (Major Ligh Of 1,20,000 Lux And Satelite Of 75000 Lux , Shadowless Lamp Microsope , Shallis Hemoglobinometer , Sics Blade-Cresent(15 Degree),Consumable , Sics Blade-Sideport(Sideport Entry Knife),Consumable , Silent Disel Generator 15Kvax12kv Dg Set , Silent Disel Generator 20Kvax16kv Dg Set , Siliver Foil , Silk No 1 Cutting Needle 1X12(1X12),Consumable , Simcoe I/A Cannula,Direct,(Num),Consumable , Single Umbilical Catheter With Leur Lock(Fr-3 To Fr 3.5 , L-40 Cm),Consumable , Single Umbilical Catheter With Luer Lock Stopcock Fr-2, L-40 Cm , Single Umbilical Catheter With Luer Lock Stopcock Fr-3, L-40 Cm , Single Umbilical Catheter With Luer Lock Stopcock Fr-4, L-40 Cm , Single Umbilical Catheter With Luer Lock Stopcock Fr-5, L-40 Cm , Slide Box Plastic Cap 100 Slide , Slide Box Plastic Cap 50 Slide , Slide Box Wooden Cap 50 Slide , Slide Holder (Made For Metal) , Slide Rack (Metal) For 25 Slides , Slide Stain Horigontal Cap 50 Slide , Slide Stain Vertical Cap 50 Slide , Slides For Microscopes. (Sep.Glass Slides Plain Size = 76Mmx26mmx1.3Mm, Clean, Scratch Free With Smooth Edges, Uniform Refractive Index, Pack Of 50 , Slit Lamp With Stand , Snellens Vision Box Roted , Sodium Citrate 3.8% - 500 Ml , Sodium Hydroxide (Naoh) (Analar / Gr/Ar) (1X500 Gm = 500Gm),Consumable , Sodium Hypochlorite 5% Solution(5 Ltr),Solution , Sodium Hypochlorite Solution 100 Ml Bottle , Sodium Hypochlorite(0.03 5 Ltr),Solution , Sodium Metabisuiphite (Na2s2o3) (Analar (Gr/Ar) (1X500 Gm = 500Gm),Consumable [710044] , Sodium Nitroprusside (100 Gm),Consumable [710034] , Sodium Pottassium Pack Of 500Ml , Soft Board 3X4 With Cover , Soft Board 4X5 With Cover , Soft Roll 4” , Soft Roll 6” , Solar Home Light System With Structure (Mne) Specification 2 Noof Cfl Rating 12V 40 Ah 7W Battery Capacity , Solar Inverter 850 Kva. Double Bettery Syestem. , Solar Led Street Lightning System Along With Mounting Pole , Spaculam , Speaker Output4 Voicecoll) , Spectra Optia Platelet Kit, Model : 10400(Packing Size : 6 Kits),Consumable , Sphygmomaw Meter , Spinal (L.P.) Needle Disposable 24Gconsumable , Spinal (L.P.) Needle Disposable 26Gconsumable , Spinal Needle G-22 L-120 Mm*0.71/Piece , Spinal Needle G-23 With Metal Stylet. , Spinal Needle G-27 L-120 Mm*0.40/Piece , Spine Board (Should Be In Plastic Material At High Strength And Waterproof. It Should Be 4 Rules For The Quick And Total Fixing Of The Head Immobilizer And Two Cavities Waherthe Board Lays On The Floor.When The Base Is Blocked In The Traditional Way, That Allow A Avoid Damaes Of Rip-Off Straps During The Usage Of Accommodation In The Ambulance It Should Be Handles For The Transport, Supplied With 3 Belts With Rapit Unhooking Buckle Should Have Maximum Radio Transparemcy To Make Exams Without Compromise Patient Condition.) , Spoon , Spring Balance Capacity 15 Kgs (For Baby Weighing) , Sprit Lamp (Steel) , Sputum Cup With Caps Pack Of 100Ml , Spuum Containersep.(Cups Made Of Special Medical Grade Polypropylene, Thin Plastc, Transulucent, Diameter- 4Cm,Capacity-30Ml, Srewable Cap Should Also Be Made Of Special Medical Grade Polypropylene And Should Be Air Tight. Leak Proof. , Stain (1X25 Gm = 25 Gm),Consumable , Stainic Rack(Each),Consumable , Staining Kit Reticulin(100 Test),Consumable , Staining Rod Steel (60Cm) , Stainless Steel Wire 30G , Steam Stock System & Mositure Trap , Steel Troch With 3 Cell , Sterilant Cold Disinfectant For Dialysis Containing Peracetic Acid Hydrogen Peroxide Acetic Acid(5 Ltr Can),Consumable , Sterilant Hot Disinfectant For Dialysis Containing 21% (Approx) Citric Acid, Malic Acid, Lactic Acid(5 Ltr Can),Consumable , Sterile Hypodermic Syring With Needle 20 Ml , Sterile Hypodermic Syring With Needle(5 Ml),Syrings , Sterile Hypodermic Syring With Needle, Mfg By Ph Health Care Pvt Ltd(10Ml),Consumable , Sterlium 500 Ml , Sterlizer Electrically Operated (Size 10X5X3) Isi Marked , Sterlizer Electrically Operated (Size 12X6X4) Isi Marked , Sterlizer Electrically Operated (Size 8X5X3) Isi Marked , Sterlizer Electrically Operated With Automatic Cut Off Ss 12X6X4 , Sterlizer Electrically Operated With Automatic Cut Off Ss 20X6X4 , Stethescope Super Quality , Stethoscope Litman Type , Stop Wathc Digital , Strecher Folding , Stretcher Trolley 4 Wheel 79X24X30 Without Handle , Stretcher Trolley 6 Wheel 79X24X30 Without Handle , Strip For Albumin Urine And Suger , Strip For Malaria Antigen, P Vivex, P Falciparum (50 Tests) , Suction Machine Portable , Suction Catheter Assorted 10 No/Each , Suction Catheter Assorted 9 No/Each , Suction Catheter, Sterile(Size Fg 20 (Disposable, Sterile Each)),Consumable , Suction Catheter, Sterile(Size Fg 22 (Disposable, Sterile Each)),Consumable , Suction Catheter, Sterile(Size Fg 6 (Disposable, Sterile Each)),Consumable , Suction Derice Apparatus , Sugar Albumin Strip , Sulfolyser For 5-Part Hematology Analyser All Model (Pack Size 5000 Ml),Consumable , Sulfur Powder , Sulphosalicylic Acid 3% W/V Pack Of 500Ml , Sulphuric Acid ( H2so4, Molecular Wt.98.08, Minimum Assay: 98% Colour: Clear , Sumag( ),Cream , Surface And Fogging Disinfectant Stabilised H202,10-11%W/V With Diluted Silver Nitrate Sol. 0.01%W/V(5 Litre Can),Each , Surface And Fogging Disinfectant Stabilised H202,10-11%W/V With Diluted Silver Nitrate Sol. 0.01%W/V(5 Litre Can),Each , Surface Disinfectant 10 Minute Aldehyde Free Disinfectant Containing Potassium Mono Per Sulphate Powder((5Kg Packet)),Powder , Surface Disinfectant 10 Minute Aldehyde Free Disinfectant Containing Potassium Mono Per Sulphate Powder((5Kg Packet)),Powder , Surgical Blade Isi Marked, Size 11(100 Per Packet),Surgical Material , Surgical Blade Isi Marked, Size 15(100/Pkt),Surgical Material , Surgical Blade Isi Marked, Size 22(100/Pkt),Surgical Material , Surgical Blade Isi Marked, Size 23(100/Pkt),Surgical Material , Surgical Blade Isi Marked, Size 24(100/Pkt),Surgical Material , Surgical Spirit(100Ml),99.9 %Bottle , Surgical Spirit(100Ml),Bottle , Surgical Spirit(450 Ml 99.5 %,Consumable , Surical Alumenium Waking Stick , Suter(8/0 (01 Box)),Consumable Pack Of 12 Foils , Suture Needle , Suture Needles Curved 1/2 Circle Round Bodyassorted Size 11-15 , Suture Needles Curved 1/2 Circle Round Bodyassorted Size 1-5 , Suture Needles Curved 1/2 Circle Round Bodyassorted Size 16-20 , Synthetic Absorbable Suture 1 With 1/2 Circle Taper Cut Needle (H) Size :1 40Mm Length 90Cm Polyglycolic Acid (Pga) (12 Foils Per Pkt) , Synthetic Absorbable Suture 2/0 With 1/2 Cir Rb Needle Size:2/0 30Mm Length 90Cm-Polyglycolic Acid (Pga) 12 Foils / Pkt , Synthetic Absorbable Suture 2/0 With 1/2 Cir Rb Needle Size:2/0 40Mm Length 90Cm-Polyglycolic Acid (Pga) Pack Of 12 Foils , Synthetic Absorbable Suture 3/0 With 1/2 Cir Cutting Needle Size:3/0 36Mm Length 70Cm -Polyglycolic Acid(Pga) 12 Foils / Pkt , Synthetic Absorbable Suture 3/0 With 1/2 Cir Rb Needle Size:3/0 20Mm Length 70Cm-Polyglycolic Acid (Pga) Pack Of 12 Pc , Synthetic Absorbable Suture 3/0 With 1/2 Cir Rb Needle Size:3/0,40Mm Length 90Cm-Polyglycolic Acid (Pga) Pack Of 12 Pc , Syring Needle Distroyer Electric Standard Company , Syring Needle Distroyer Menualstandard Company , System For Delivering Saturated Atomized Steam For Decontamination Of Surfaces , Tasla Iron Standard Size , Test Tube 12 X 100 (Medicm Size) 100/Pkt , Test Tube 12 X 75 (Small Size) 100/Pkt(12 X 75 (Small Size) 100/Pkt),Tube , Test Tube 15X125 [987819] , Test Tube Medium (12X100) 100Eack/Pkt(Each),Consumable , Thema Col Box (25Cmx21cm) , Thematic Apperception Test With Cards And Manual , Therma Coal Box(Size 9X6x6) , Thermometer Guaze With Automatic Display , Thermometer Manually For Fever Tamprature , Three Layer Surgical Mask Pack Of 100Pc , Thrombin Time Kit(10X3 Ml),Consumable , Thyroxine(T3),Pack Of 96Test , Thyroxine(T4),Pack Of 96Test , Thread Real For Suture Cotton , Tips For Auto Pippetes 10 To 100 Micro Litres , Tissue Paper Roll(Each),Consumable , Tissue Roll Paper (13Cm) , Tmt Graph Paper A4 Size, 100 Piece/Pkt , Toilet Brush Super Quality , Tooke Corneal Knife(Num),Consumable , Torch 3Cell Steel Body , Torch With Cells , Torch With Three Cell Isi Market Medium , Torch With Two Cell Isi Market Medium , Total Protein (100 Ml),Consumable , Total Protein Lysozyme 1X50 Ml , Total Protein Test Kit(100 Ml Bottle),Consumable , Tourniquet With Belt(Mfg By Precious Life Care Pvt Ltd)(Good Quality Pairs),Consumable , Towel Mayo Forcep Size 8 To 15 , Triglycerides (Enz.End Point) Liquisat) Pack Of 10X10ml , Trolley For Patient Ss , Tsh (Elisa) Pack Of 96Test , Tube Sealer Electric , Tuberculin Syringe , Two Step Slit Lamp , Typhoid Test Card Single Test For Widdal , Tyvek Suit Kit - 1 Pcs Full Body Cover, 1 Pcs 3Layer Mask, 1Pcs Gloves, 1 Pair Shoe Cover, 1 Pair Of Goggles(60 Gsm Non Wooven Fabric),Consumable , Uero Bag 2Letrs Capacity , Umbical Cord Clamps- Plastic Material (Box Of 100 Clamps) Consumable , Urea (Liqustat) Pack Of 10X10ml , Uric Acid (End Point) Pack Of 10X10ml , Urinary Drainage Bag (Paediatric)(100 Ml / Pc, Each),Consumable , Urinary Drainage Bag 2 Litre Cap With Non Return Valve (Eo Sterile) , Urinary Drainage Bag Cap With Non Return Valve (Eo Sterile)(2 Litre, Each),Consumabl , Urine Caontainer Sterile 30Ml Pack Of 100 , Urine Container 5Ml Disposable (50 Per Pkt) , Urine Container Size Of The Container Shall Be 30Ml Disposable (50 Per Pkt),Consumable , Uristic For Albumin/Suger Urine Pack Of 100 Strips , Urosticks(50/Pkt),Consumable , Utility Gloves , V.P Shunt Medium Pressure (Venticular Peritonial Shunt, (Venticular Catheter 15Cm Length, 1 Distilled Catheter 75 L, Struit Stylet)(Each),Consumable , V.P.Shunt(Low Pressur),Consumable , V.P.Shunt(Medium Pressur),Consumable , Vaginal Speculam Sims , Vaginal Speculam Ss Cusco Large , Vaginal Speculam Ss Cusco Medium , Vaginal Speculam Ss Cusco Small , Vaseline White/Yellow(1/2 Kg),Consumable , Vdrl (Rpr) 1X100 Sd Strip For Syphlis , Vdrl Kit (Strip) 50 Test/Kit),Consumabl , Ventilator Neoatal & Pediatric - Volume Cycle Ventilator, Microprocessor Based Assisted Controled Short Term For Prolonged Ventilation Can Be Provide, Volume Delivery 20 Ml To 2000 Ml Cmv, Simv, Asb, Peep, Cpap Modes Easy To Handle And Operational, Electrically Operated, Air Compresson Should Be Provided Along With The Ventilator Miounted On Same Trolley, Nebulizer & Humidifier Both Adult And Pediatric, Ups System And/ Or Battary Backup For Compressor And Ventilator, Adult, Pediatric And Neonatal Breating Cicuits (Each) Alarms Display Facillity, Fio2 Dispaly Digital Display- All Set Parameter Should Be Display Automatically , Vineland Adaptive Behavior Scale (Indian Adaption) With Manual , Viscoelastic Material - Made By Reputed Company Guaranted Eto Sterlized, Prefilled Glass Syring 2Ml , Viscoelastic Material - Made By Reputed Company Guaranted Eto Sterlized, Prefilled Glass Syring 3Ml , Viscoelastic Material - Made By Reputed Company Guaranted Eto Sterlized, Prefilled Glass Syring 5Ml , Viscoelastic Material - Made By Reputed Company Guaranted Eto Sterlized, Prefilled Heavy Dencity 10000 Glass Syring 2Ml , Viscoelastic Material - Made By Reputed Company Guaranted Eto Sterlized, Prefilled Heavy Dencity 10000 Glass Syring 3Ml , Viscoelastic Material - Made By Reputed Company Guaranted Eto Sterlized, Prefilled Heavy Dencity 10000 Glass Syring 5Ml , Visiter Chair Three Seater Mettalic With Handle (Ss) , Vtm - Hi - Media With 2 Swab : (For Swine Flu) Vtm Standard Kit(3Ml Vial With 2 Regular Swabs) , W/V Available Iodine In A Non-Oxynol With Solubleiodine Suractant Base With Sodium Iodide(Less Than 1% W/V And Surfactant Less Than 5% W/V500 Ml), Consumable , Wall Fan -18 Complete & Instaltion Charge (Standardisi/Iso Reputed Company) , Wall Thermometer , Warm Bag , Warm Sleeping Bag For Neonates , Wash Bottel Plastic 500Ml , Washing Machine Have Appliance 7Kg , Waste Matarial Drum Swing Model 30 Ltr. , Waste Matarial Drum Swing Model 60 Ltr. , Water Bath Rectangular Thermostatic (Double Walled)- Spec.In Is A Double Bath With Inner Chamber Made Of Stainless Steel And Outer Wall Made Of M.S Duly Powder Coated Paint.The Gap Beteween Outer And Inner Wall Is Filled With Special Glass Wool Insulation.The Conecntric Ring Can Be Removed To Accommodate Containers Of Various Sizes. Temperature From Ambient To 100 Digree+1Digree C Is Controlled By Improted Thermostant. 355X405x100mm (12 Holes Of 75Mm Dia) 14 Ltrs., Urnie Analyzer ;-Long Life Light Illminator Measuring System With 4 Wavelenght Improves The Sensitivity Accuracy And Precision Of The Result . Use Can Edit Sample Id/Patient Name . Automatically Detects The Test Strip. Can Be Connected With Exeternal Barcode Reader&Urine Sediment Analyzer. Sutable Strip Uts-8,10,11,&11 Ma , Water Cooler 150X150ltr Isi Market , Water Cooler 20X40 Ltr Isi Market , Water Cooler 40X80 Ltr Isi Marked , Water Cooler 60X120ltr Isi Marked , Water Cooler With Dispenser (20 Litre) Isi Mark , Wbc Dialuation Fluid(Mfg- Precious Life Care Pvt Ltd)(500 Ml Bottle),Consumable , Wbc Diluting Fluid 500Ml , Wbc Pipet , Weghing Machine , Weighing Machine (1Gm To100gm) , Weighing Machine Pediatrics , Weight3.00Kg , Wheel Chair With Hand, Foot And Neck Rest Ss, , Whitacre - Pencil Point Spinal Needle 25 G With Introducer , White Petrollium Jelly 1Kg , White Petrollium Jelly 20 Kg , Widal 4X5 Ml [987811] , Widal Slide Test(4X5m1 With Control),Consumab , Widdal 2X2 Tube Test Kit For Typhoid , Widdle Reapid Test Cardsingle Test , Widdle Reapid Test Card Antigen Pack Of 50Ml , Wiper Medium Size , Wiper Standard Size , Wooden Stick/Broom Stick (8Inches) , X-Rayfilm (Dihl),Consumable 8 Inchx 10 Inch , X-Ray Cassets With Screen Size 10X12 , X-Ray Cassets With Screen Size 12X15 , X-Ray Cassets With Screen Size 8X10 , X-Ray Cassets(6.5X8.5),Consumable , X-Ray Cassets(8X10),Consumable , X-Ray Chest Stand , X-Ray Developer Powder (13.5 Liter),Consumable , X-Ray Film 10 X 12 50 Sheets/Pack , X-Ray Film 10X12(50 Sheet/Pack),Consumable , X-Ray Film 12 X 12 50 Sheets/Pack , X-Ray Film 12 X 15 50 Sheets/Pack , X-Ray Film 12X15(50 Sheet/Pack),Consumable , X-Ray Film 14 X 14 50 Sheets/Pack , X-Ray Film 14 X 17 50 Sheets/Pack , X-Ray Film 6.5 X 8.5 50 Sheets/Pack , X-Ray Film 8 X 10 50 Sheets/Pack , X-Ray Film 8X10(50 Sheet/Pack),Consumable , X-Ray Film Digital 11X14 , X-Ray Film Digital 14X17 , X-Ray Film Digital 8X10 , X-Ray Film Fixer(Powder To Make 13.5 Liters-Pkt),Consumable , X-Ray Film Fixer(Powder To Make 9 Liters-Pkt),Consumable , X-Ray Film-Polyster Based Imaging Film 35.6Cmx43.2Cm (14X17)(Size-50 Sheet In One Packet),Consumable , X-Ray Fixer 13.5 Lit , X-Ray Fixer 22.5 Lit , X-Ray Flimpack Of 1X50 Size 10 Inchx 12 Inch(Dihl),Consumable , X-Ray Flimpack Of 1X50 Size 14 Inchx 17 Inch(Dihl),Consumable , X-Ray Grid 12X15 , X-Ray Grid 8X10 , X-Ray Half File Glomer 6X15 , X-Ray Half File Glomer 6X17 , X-Ray Hanger Size 10X12 , X-Ray Hanger Size 12X15 , X-Ray Hanger Size 6.5X8.5 , X-Ray Hanger Size 8X10 , X-Ray Hangers(10X12),Consumable , X-Ray Hangers(12X15),Consumable , X-Ray Hangers(6.5X8.5),Consumable , X-Ray Hangers(8X10),Consumable , X-Ray Lead Number (A To Z & 0 To 9) , X-Ray Led Aprin Standard Size , X-Ray Led Gloves , X-Ray Steel Ka Tank 13.5 Lit. , X-Ray Steel Ka Tank 19 Lit. , X-Ray Table For Patient Examine , X-Ray View Box Double , X-Ray View Box Single , X-Ray View Box With Auto Sensor (Four Film) , X-Ray View Box With Auto Sensor (One Film) , X-Ray Film-Polyster Based Imaging Film 30.5Cmx30.5Cm (12X12)(Size-50 Sheet In One Packet),Consumable , X-Ray Film-Polyster Based Imaging Film 35.6Cmx35.6Cm (14X14)(Size-50 Sheet In One Packet),Consumable , 2Tu Ppd Vial 5Ml , Xylene (Sulphur Free)(1 X 2.5 Lit),Consumable , Zipper Ploy Bag 4X4 , Zipper Ploy Bag 4X6 , Zipper Ploy Bag 9X6 , Zipper Poly Bag (Size 5”X3”) , Zipper Poly Bag (Size 6”X5”) , Zipper Polybag 10X8’’ , Zipper Polybag 8’X6’ , Poly Bag Black 16X18’’ , Air Conditioner Window 1.5 Ton 3 Star , Air Conditioner Window 2 Ton 3 Star , Air Conditioner 1 Ton Split 3 Star , Air Conditioner 1.5 Ton Split 3 Star , Air Conditioner 2 Ton Split 3 Star , Stabilizer For Ac , Office Almirah , Laser Printer , Laser Printer All In One , Inkjet Printer , Desktop I3 Windows 11 , Desktop I5 Windows 11 , Public Place Seater Bench Ss Without Backrest , Ultrasound Unit (1 Mhz) For Physiotherapy , Foot Drop Splint , Cock Up Splint , Finger Splint , Tens Machine , Display Board With Glass , Laptop I5 Window 11 , Shoulder Wheel , Finger Exerciser Web , Shoulder Pully T-Type , Spiro Meter With Disposal Mouth Piece , Lower And Upper Extremity Static Cycle , Iron Rack , Industrial Rack , Exicutive Revolving Chair , Zip Lock Polythene Pp Pouche 12 To 19 Inch , Zip Lock Polythene Pp Pouche 6 To 9 Inch , Straight Plastic Brush , Centrifuge Tube 50Ml , Card Bord Box Small , Laminar Air Flow , Filter Paper , Biohazard Polythene Bag , Three Seater Chair , Cupboard (Closed Rack) , Water Cooler 60Ltr , 8.0 Silk Suture , Dispovan Syringes 10Ml , Dispovan Syringes 05 Ml , Blood Transfusion Set , Iol Non Foldable Lenses , Black Gogles , Micropore Paper Tape 4 Inch , Micropore Paper Tape 1 Inch , Cotton Bundles , Sterile Pad , K Wires 1 1.5, 2, 2.5 Mm , Hand Drill , Hydrolic Ot Table , English Plier , Bone Holding Forcep For Radius Ulna Bone , Bone Holding Forcep For Humerus Bone , Bone Holding Forcep For Femur Bone , Tbw Ss Wires No. 18, 20,22 No. , Patella Holding Forcep Large , Patella Holding Forcep Small , Plate Holding Forcep Small , Plate Holding Forcep Medium , Plate Holding Forcep Large , K-Wire Cutter Medium , K-Wire Bender Steel , T Handle & Ss Chuck Small , T Handle & Ss Chuck Large , Wire Passser Small , Retractor Right Angle Medium , Retractor Right Angle Small , Retractor Right Angle Large , Bone Spikes Small , Bone Spikes Medium , Hohmann Retractor , Bone Cutter Small , Lenz Bone Holding Forcep , Towel Clips Small , Towel Clips Medium , Steel Drill Bits 2.7Mm 3.2Mm 3.5 Mm Steel , Screw Driver For 3.5 Mm Screws , Canullated Drill Bit For4mm Screws , Canullated Tap For4mm Screws , Steel Hammer Heavy , Bone Punch , Currete Straight , Currete Curved , Osteotome Small , Osteome Medium , Osteotome Large , Bone Gauze Small , Bone Gauze Medium , Bone Gauze Large , Electric Drill Set Man Man , Canulated Reamers For Femur , Hooks For K Nail Retractor , Reamers For Radius Ulna Nailing , Extractor For Radius Ulna Nailing , Drill Sleev For 2.7 & 3.2 Mm Drill Bits , Hoilow Mill , Zigli Saw , Eletric Torniquet , Pneumatic Tourniquet , Radient Warmer , Ambu Bag Pediatric , Suction Machine Foot Oprated , Suction Machine Electric , Thermameter , Hub Cutter , Oxygen Tube , Oxygen Hood , Oxygen Mask , Stethpscope , Laringoscope , Laringoscope Blade 0 No , Laringoscope Blade 1 No , Tourch , Infentometer , Measuring Tape , Diamond Marker , Tissue Roll , Marker Pen Red Black , Auramine -O , Hydrochloride Acid , Broom Stick , Zipper Polythene , Measuring Cylinder 1000Ml , Measuring Cylinder 500Ml , Methnol , Apron Coton , Bio Hazard Lables , Amber Coloured Bottle 250Ml , Brown Tape , Slide Box For 100 Slide , Beaker 500Ml , Glass Ware For Stain Preparation Meassuring Cylinder-Graduated 100Ml , Glass Ware Round Flate Bottom Flask-1 Lit , Stainless Steel Scissors , Water Bath Digital , Hand Wash 1000Ml , Laminar Air Flow , Towel , Rack Steel , Lens Paper , Ppd Vial 2 Tu , Ppd Vial 5 Tu , Distilled Water , Spirit Lamp Steel , Phenyl 40% , Tri Sodium Citrate , Di Sodium Hydrogen Phosphate , Potassium Di Hydrogen Phosphate , N-Acetyl L-Cystein , Glass Slide , Cryo- Vial Sterilr With Cap 1.5Ml , Tips 200 ?L Sterile With Box , Tips 1000?L Sterile With Box , Tips 1250?L Sterile With Box Long 1Ml , Bags For Waste Bin Black 30L , Bags For Waste Bin Red 30L , Bags For Waste Bin Blue 30L , Disposable Laboratory Coat Large White Colour , Disposable Laboratory Coat Medium White Colour , Disposable Laboratory Coat Large Blue Colour , Disposable Laboratory Coat Medium Blue Colour , Storage Box With Lid For 0.2 Ml Pcr Tube , Steel Rack For 50 Ml Conical Tube , Plastic Rack For 50 Ml Conical Tube 24 Position , Sodium Hypochloride , Pasteur Pipette Individually Packed Sterile 3Ml , 50 Ml Pptubes For Centrifuge , Pcr Tube 0.2 Ml , Falcon Tube Stand , Refrigrator 322 Liter , Ups Double Battery , Ceiling Fen , Delivery Table , Labour Table Mettres , Almirah , R O Machine , Auto Clave Drum Large , Auto Clave Drum Medium , Auto Clave Drum Small , Kidney Tray , Dental Chair , Uv Chamber , Ultrasonic Scale , Compressor For Dental Chair , Glass Bed Sterilize , Aerotor , Xtracton Forcip Set , Elevator Set , Diagnostic Instrument Set For Dental , Glass Slab , Restrotiv Instrument Set , Enoo Motor , Rbg Size 2 Digital Infra Oral Xray Sensor With Desktop , Aerotor Burs , Artery Forcip , Episiopomy Ceizer , Bowl , Thumb Forcip , Delivery Tray , Office Table , Plane Seizer , Stich Cutter , Needle Holder , Spung Holder , Chittle Forcip , Cord Cutting Seizer , Tooth Forcip , Non Tooth Forcip , Knife Holder , Bp Insturment Digital , Cidex Tray , Mezenba Seizer , Ot Fogging Machine , Weight Machine Adult , Office Chair , Nebulizer , Foot Step , Plastic Chair , Invertor With Battery , Rivolving Chair , Patient Stool , Drug Cart , Stadiometer , Examination Table , Fetal Dopler , Thermometer , Flying Catcher , Autoscope , Bio Waste Bucket , Digital Wall Clock , Equipment Tray , Fire Extinguisher , Three Buckt Trolly , Crash Card Trolly , Delivery Set , Epigiotomy Set , Mtp Medicine Set , Multipera Monitor 5 Pera , Ot Table , Ot Table Hydrolic , Ot Light Celing , Spot Light , Hb Meter , Exhaust Fen , Suction Machine Electric , Finger Print Scaner Machine , Plastic Tub , R O Machine 60 Liter , R O Machine 80Liter , Kmc Chair , Electric Water Geyser 10 Ltr.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Madhya Pradesh View Result →
11.
Educational and Research Institute #10357236 Price Bid
Supply Installation And Commissioning Of Ict Equipment Item Rate On Turnkey Basis. , Multimedia Projector, Ultra Short Throw,0.4 And Below Native Resolution-1280X800 (Wxga) Resolution, Hdmi In Port- Yes, Audio In And Audio Out -Yes Technology One Chip Dlp, Projection Method-Front And Rear, Brightness In Lumens3500 And Above, Storage Media Port –Yes,Lan / Wi-Fi Connectivity 3 D Projection Capability –Yes, Minimum Life Of Light Source 5000Hr Type Of Light Source-Uhp/Uhe/Uhm, Power Supply 210V-240V 50Hz , Language Ict Software, (Multi Language,Scope-Language Learning Software,Type Of Language Offered -English, Min. 3 Years Support, Min.5Days Training At Site Deployment Option In Premises. , Headphone With Microphone, Circumaural, With Microphone, Wired Connectivity,Bidirectional/Cardioids Pick-Up Pattern Warranty 3 Years, Transducer Principle-Dynamic, Speaker Driver Size(Mm) –Min.40 , Menti- Server Computer, Intel Core I7 6700 (3.4Ghz 8Mb Cache, 4Cores ) 8Gb Ram/1Tb Hard Disk /Dbd-Rw/2Gb Graphics/Window 10Pro/19.5 Inch Tft Monitor. , Screen For Projector Wall Mount, Size 8X4 Ft.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Madhya Pradesh View Result →
12.
Housing Urban and Rular Development #10235078 Price Bid
Tender For New Construction Of Cheriyan Nagar Library Chennai; 1 DISMANTALING WORKS 2 Dismantling etc., all complete 3 Brick / Stone Masonry in lime mortar walls 4 Dismantling RCC by manual / by using deploying machineries 5 Doors and Windows including removal of frames, hinges and fastenings 6 CIVIL WORK 7 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size bouldersand Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum 8 Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 40 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 9 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 10 Supplying and filling in foundation, basement, etc with filling Gravel inwellrammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 11 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 12 Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls.The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and sprayingthe same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers. 13 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages ,placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by theClient / Engineer-in-charge. 14 For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members 15 for plane surfaces such as rectangular or square rcc columns, sunshades, topand bottom slab of rcc boxing, etc. 16 Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members 17 Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. 18 For FoundationandBasement 19 For Ground Floor 20 For First Floor 21 For Second Floor 22 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 23 Supply and constructing Fly ash Brick (230 x 110 x 75mm) masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure usingFly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 24 For Ground Floor 25 For First Floor 26 For Second Floor 27 Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails. 28 Upto 3 M Height 29 3 m to 5.5 m Height 30 5.5 m to 7.5 m Height 31 7.5 m to 10 m Height 32 10 m to 12.5 m Height 33 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 34 Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate includingcost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 35 Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand)according to specifications. Rate shall include for providing GI chicken mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 36 Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 37 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 38 UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work 39 UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chamberedsections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work 40 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 41 Painting the new Iron work with two coats of Ready Mixed Enamel Paint of aproved quality and colour over the existing priming coatincluding the cost all materials etc.,complete, in all floors and as directed by the Departmntal Officers. 42 Providing and fixing Vertical blinds , quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete. 43 Supply and laying with best quality the following materials of Ruby Red, Raw Silk Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 44 Supply and laying with best quality the following materials of Sinthetic Grey, Paradise and similar varieties Granite Slabs Granite Tiles - (Superfine Polished with Machine Cut Edges) of size 2’0” x 1’0” and above 10mm Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 45 Nosing for Granite Slab-Single Nosing 46 Grooving the Granite Slab 47 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Executive Engineer before use on work 48 Paving the floor with design Antiskirt Ceramic tiles (colour and shade as directed) of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement. 49 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 50 Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 of approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Naterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc Rate including all mater aaod and lifts, working materials, labour charges wastages with necessary lead and at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specificatior and as directed by the Client/ Engineer-in Charge 51 Including applying two coats not less than 2 nm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No. 1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 52 Waterproofing: Providing and Applying CFTRI approvedtwo component flexible polymer modified acryliccementitious waterproofing coating with a mix ratio of(5 Liquid :7 Powder) to the RCC surface of the UGT/OHT tankapplied @ 2.2kg/m2 in 2 coats to achieve1.2mm DFT, having Elongation at break >120% asper ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right anglesof wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completelyas per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, >1.5 Mpa as per EN1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applyingtwo component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification 53 Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 54 Supplying And Fixing Rubber Moulded Interlocking Paver Blocks Against Available Edge Restraints 83 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)) 55 Supplying and fabricating of MS structural steel supports for various applications using channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above. 56 Providing Teak wood wrought and put up for frames of doors, windows and ventilators and any other similar joinery works including cost of country wood scantlings and labour charges for manufacturing the frames and fixing hold fasts and fixing in position etc. for all lengths as per architect designs. 57 Best Indian Teak Wood Panelled door in double shutters with frames 100x75mm at side,verticals and top. The shutters shall beof 40mm thick with moulded panels in 20mm thick planks,6Nos.of iron hold fasts fixed in c.c.1:2:4 6Nos.of butt hinges 125mm long including wind appliances, furniture,iron fittings,1No.of iron padlock 15cm long for locking arrangements and fixing inposition,etc.,complete.(ISI STD) 58 Varnishing the new wood work one coat with best shellac and with fine best varnish of approved quality varnish of teak wood natural finish including preparation of surfaces with sand papering in patty priming etc., complete complying with standard specification and as directed by the Departmental officers. 59 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 60 Best Indian Teak Wood panelled door shutter for single leaf door. The shutter shall be 40mm thick with moulded panels in 20mm thick planks inclusive of 3 Nos.butt hinges 125mm long,furniture iron fittings,1No.of jappened hooks and eyes 200mm long and 6mm thick and iron pad lock 15cm long including fixing inposition,etc.,complete 61 FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT -GOBAINGYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at1200mm c/cmax by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying 62 Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works. 63 Supplying and Fixing of English Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 64 Supplying and Fixing of Tamil Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 65 upplying and Fixing ofEmblem (15”) Stainless Steel size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 66 Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges. 67 Supplying and erecting in position LIGHT DUTYSTEEL TRUSSES as per the drawing.The materials and design of the trusses should confirm to the relevant Indian Standard specification.The trusses shall be procured only from reputed manufactures oftrusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design.The rate quoted shall include the cost oftrusses.Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc.,The roof sheeting shall project 0.762m from the eves purlins. 68 Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. 69 Providing, supplying, and fixing factory-manufactured pre-fabricated insulated roofing panels made of PUF (Polyurethane Foam) sandwiched between two metal skins, comprising pre-painted galvanized iron (PPGI) sheets of 0.5 mm thickness on both sides with 40 mm to 50 mm thick CFC-free polyurethane foam core of minimum density 40 kg/m³, having tongue and groove jointing with cam-locking arrangement for weather-tight sealing. Panels shall have minimum overall R-value of 6.5 and thermal conductivity not more than 0.022 W/m·K. Roofing to be supported over structural purlins/trusses using self-drilling screws with EPDM washers, sealants, fasteners, ridge covers, and flashing, complete. Rate includes supply, transport, hoisting, cutting to size, edge finishing, foam taping at joints, sealing, labour, tools, scaffolding, and all incidentals for a fully finished, insulated, and weatherproof roofing system as per manufacturer’s specification and as directed by the Engineer-in-Charge. 70 Brick Wall Cladding Nuvocotto Edge Cut Wall Tiles Natural Red finish in size 230mm x 76mm x 15mm 71 Brick JalliNuvocotto Camp Jallie Natural Red finish in size 200mm x 200mm x 60mm 72 Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT 73 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 74 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 75 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 76 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 77 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 78 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 79 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,. 80 PLUMBING 81 Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, unioncoupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. 82 Supplying and fixing Stainless Steel Health Faucetwith all the accessories etc, 83 Supply and fixing White without PedastalWash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia B Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples,15mm CP Pillar Tap etc (The wash basin should be got approved by Executive Engineer before use on works). 84 Providing and fixing C.P. Angle stop cock of approved quality conformingto IS:8931 :15mm nominal bore 85 Providing and fixing Brass Chromium Plated Towel Rail 60cm long and20mm dia with Brackets etc,. 86 Providing and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm 87 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. 88 75 DIA 89 110 DIA 90 Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. 91 40 DIA 92 Providing, fixing and testing of PVC floor- trap 110 dia with necessory of multitrap connection (heavy duty hinged type) with brass CP frame & cover (100 mm x 75 mm). Trap of 100 mm dia inlet and 75 mm dia outlet fixed on a bed of cement concrete etc.complete. (The frame and grating shall be approved by Architects) 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Concealed On Wall) 94 20MM DIA 95 25MM DIA 96 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 97 25mm dia Cost of gate valve 98 32mm dia Cost of gate valve 99 Providing, installation, testing and commissioning approved make CIY-type Strainer conforming to IS standardwithnecessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. 100 32 mm nominal bore 101 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.(Pipes Runningin the Shaft & below ground level) 102 75 DIA 103 110 DIA 104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Pipes Runningin the Shaft & below ground level) 105 25MM DIA 106 32MM DIA 107 Providinging and fixing in position PVC Vent cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). 108 75MM DIA 109 110MM DIA 110 Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mmthick M.S. plate of size 300 x 300mm plusdia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.(Rate As per Quotation) 111 32 mm dia 112 40 mm dia 113 50 mm dia 114 65 mm dia 115 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:(Rate As per Quotation) 116 Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm ,Heavy duty RCC precast cover (SFRC), benching in CC M-15, internalfaces plastered smooth in CM1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600x600 mm size internal and depth will 450mm to 1200mm & 900x800 mm size internal and depth will 450mm to 1200mm. (Rate As per Quotation) 117 600x600 118 Making of core cutting in RC slab of maximum 150mm thick of following diameter. 119 a) 150 mm dia 120 b) 125 mm dia 121 Providing and fixing MS slotted angle iron brackets, hangers, MS grip bilts,universal clamps with thereaded rod,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water Providing pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls/outer walls etc., The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08 mm thick conformed to IS 1239 etc., complete as directed by the employer. 122 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm) 123 Providinging, installing, fixing, jointing, testing and commissioning of PVC Storm water pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste,The quoted rate shall include necessary earth work, fittings,pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting,refilling, and making good the same complete as required. 124 110 DIA 125 Providing, fixing and testing of Terrace Rain water outlet (110dia) with all the accessories etc,. 126 INTERIOR 127 BOOK SHELF 1 - 2100 x 400 x 2100 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 128 MAGAZINE HOLDER - 600 x 250 x 1200 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 129 DISPLAY UNIT AT RECEPTION - 1200 x 300 x 600 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 130 LEDGE 5000 x600 x 750 Panels are 16mm MR ply with 1mm Matt Finish on both sides with 2mm PVC Edge Band finish mounted to the wall. 131 4SEATERLEARNINGCENTRETABLE-2000mmx1000mmx750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thick 132 6SEATERLEARNINGCENTRETABLE-2400mmx1000mmx 750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thic 133 READING CHAIR - Lounge Chair Uphostered in EPU Leather. Sleek Four Star Fixed Base With Revolving Function In Warm White Powder Coated Finish. Three Dimensional Lumbar Support Design. Model number SCML-SF30.1. Bosses Cabin or equivalent. 134 ROLLINGCHAIRS-Medium back chair with metal grey back frame, metal grey adjustable PU armrest (4D), moulded foam seat with metal grey shell, STG drive-by-wire mechanism with 4 position locking, polished aluminum alloy five-star base with metal grey PU castors. Model number CHT66SW. Bosses Cabin or equivalent. 135 SINGLESTUDYCHAIR:Multi-Purpose Chair Upholstered In Water Based PU Leather. Cushioned Seat and White Ash Solid Wood Legs. Model number SCMF-XCB33 - Latte Brown. Bosses Cabin or equivalent. 136 LOCKER & FOOTWEAR STORAGE- – 1950x375x470mmPLU main 2 DR numeric lock with envelop slot – 1950x375x470mm. Godrej interio or equivalent. 137 RECEPTIONDESK-1800mmx650mmx 1050mm- Reception Table In Matt White and Oak Laminate. IncludesStorage Cabinet and WireManagement Grommet OnDesk. Top Model number 28ROB003(BCRMB-OB 03). Bosses cabin or equivalent. 138 Seamlessly shift from warm, cozy tones to cool, vibrant whites (also known as tunable white or human-centric lighting) is an advanced JS3 Serial LED Connecting System LED lighting technology that allows users to adjust the color temperature of the light output — from warm to cool — to suit mood, time of day, or functional needs.LED Type: OSRAM SMD 3030Iceil™ Supply of OSRAM 24V LED Module Color Temperature: 2700K to 10000K with Iceil IP67 Drivers CRI: ≥90 – Delivers natural, true-to-life color accuracyMounting: High-performance aluminum rigid PCB– Ensures excellent thermal management and long lifespanConfiguration:– Each block features 4 high-quality LEDs– Optimized light spacing for shadow-free illumination– Viewing Angle: PMMA lens Ultra-wide 160° beam spreadDimmable: No Compatibility:DALI, Tuya Smart App, Alexa, & Google Home. Touch Panel, and RF Remote control optionsPower Consumption:– Only 4-6W per sq.ft– Energy-efficient yet high-lumen outputLighting Quality:– Uniform light diffusion across the stretch ceiling– Suitable for both translucent and printed membrane typesIceil™ Power Supply: Wide Input Range 100-305AC (Class I), Surge Protection with 6KV/4KV, Working temp. -20~ +45°C 20% ~ 90%RH, Metal case IP67, Power factor <0.98LED and Power Supply Warranty: 5 Years or 50,000 Hours (whichever comes first)Certifications: CE & RoHS Certified – environmentally safe and globally compliant Installation of pre-supplied LED lighting fixtures, associated drivers, and control systems, including all necessary mounting, wiring, terminations, and system integration by qualified technicians.The scope includes:Installation of LEDs as per lighting layoutMounting and secure placement of LED drivers and control gear in accessible locationsElectrical connections between LEDs, drivers, and controllers using appropriate cablingTesting of each circuit and commissioning of the full lighting setupRate Includes: Skilled labor, tools, basic fasteners, and all on-site installation efforts.. 139 Iceil™ supplies exclusively premium-grade of European Standard PVC Thermo-Stretchable Membrane, complying with BS1-D0 as per EN 13501-1 and Class A as per ASTM E84-2024 fire safety standards. The membrane is precision-cut to the required shape and size, with perimeter edges high-frequency welded with harpoon inserts. Installation is carried out using a durable aluminium profile framing system, ensuring a seamless, secure, and aesthetic ceiling solutionThickness 0.18 mmWeight 250–300 gsm ± 2%Light Transmission Up to 75% (for translucent type)Width Up to 5 meters (seamless); larger areas joined with invisible seamsStretching Method Thermal installation at ~50–60°C using hot air gas blower Fire Rating BS1-D0, as per EN 13501-1, ASTM E84-2024 Class A Explanation: B = Very limited contribution to fire, s1 = Little or No Smoke Production, d0 = No flaming droplets or particles Moisture Resistance 100% Moisture-proofUV Resistance Yes – does not yellow or degrade indoorsEnvironmental ROHS compliant, Phthalate-free, UL Certified - Tri-O-cresyl phosphate < 50mg per kgCertification Manufactured in ISO 9001:2015 certified factoryWarranty 10 Years (under standard indoor conditions) Installation of pre-supplied Stretch Ceiling System, including site preparation, profile fixing, membrane stretching, and finishing using specialized tools and skilled labor.The scope includesFixing of aluminum/PVC perimeter profiles as per approved ceiling layoutHeating and stretching of the pre-cut stretch ceiling membrane on-siteAlignment, tensioning, and seamless fitting of membrane onto the installed profilesIntegration of cutouts for lighting, sprinklers, air conditioning vents, speakers, etc.Final finishing, cleaning, and handover of installed ceiling areaRate Includes: Skilled labor, installation tools, on-site execution, and necessary accessories for completing the installation of the stretch ceiling. 140 The Iceil Wooden Box is built from durable MR/BWP-grade plywood, featuring a 12mm back board, 18mm vertical sides (150mm height), and dual 8mm flexible plywood layers for curved designs. The 150mm depth accommodates lighting and structural needs.Finish Options: White emulsion or PU-coated interior, or white reflective laminate; exterior customizable per client.Mounting: Reinforced corners, cross supports (wood/MS) every 2 ft, fixed with dash fasteners, threaded rods, or MS supports.Stretch Ceiling Compatibility: Suits Iceil’s PVC Harpoon Profile System with aluminium profiles for welded membranes.Lighting Integration: Base for rigid block LEDs with ventilation slots for heat dissipation. 141 Wall paper 142 Carpet Flooring 143 160A LT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, Wall mounted, single front,14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars,internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The Breakerof 160A TPN MCCB and 1set of 160/5A CT with TNEB Metering provision and 1nos of 160/5A CT for APFCR . (Rate as per Quotation) 144 Supply and Erection of electrical panels Boards 145 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type Three Phase Changer Over panel of size (H 2100 X L 2000 X D 300 ) mm with suitable to accommodate 100A 4 pole Three phase Change Over Switch-1No. as incomer for EB Source and as incomer for DG Source, 6nos of 63A 4Pole MCCBs and 4nos of 32A 4Pole MCCBs compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 146 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type 50 kVAR panel of size (H 1800 X L 1800 X D 300 ) mm with suitable to accommodate Incomer 1 Nos 63A 4Pole MCCB, 7nos of 25A 4Pole MCCBs with 7% 1-10 kVAR Capacitor banks in compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 147 VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixingof4way verticalTPMCBsheetsteel Industrial Type TP MCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 4 Nos.of32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections) 148 Supply and fixing of 7 segment8 way63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. withthe following in flush with wall with earth connection only. 149 Supply and fixing of 65 mm dia. (2 -1/2) GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 90W LED Streetlight fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour 150 Supply and Fixing of24W Ceiling Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 151 Supply and Fixing of11W Bulk Head Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 152 Supply of surface-mounted 24W LED wall lights to the ideal solution for a variety of indoor lighting applications. Direct illumination of the wall and surrounding surface, as well as accent lighting for vertical structures. Featuring an aesthetically pleasing, robust construction, these lights are built to withstand all weather conditions, ensuring long-lasting performance and durability • Luminaire body made of extruded aluminium alloy (grade 6063) with die cast aluminium components and non corrosive SS fasteners • Non yellowing UV stabilized translucent polycarbonate diffuser • Luminaire integrated with 24W LED • Die-cast aluminium mounting base for easy installation onto the wall • Surface mounting on wall using hardware after connecting to the power supply • IP : 65, IK : 08 • Cable entries for through-wiring of mains supply cable • Integral constant current power supply • CRI ( Ra) : >80 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply • Available CCT : 2700K, 3000K, 4000K, 5700K. Driver Power Supply : Integral, Input Voltage : 230-240Vac, Frequency : 50-60 Hz, Power Factor : ≥0.95, THD : <10%, Surge Protection : 4KV, Efficiency : >85%, Symmetrical Light Distribution.Product Finish options: Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. CE & BIS Certified. Inhouse NABL accredited lab. Brand Name : Philips, Product SKU : 919215850004 153 Supply of LED Linear Pendant luminaire is a versatile solution for projects that demand high quality of the lighting system and high visual comfort. With its modular design, the Revo-L can be used as an individual fixture or as a combination of luminaires put together in continuous lines • Luminaire made of extruded aluminium for better thermal management • polycarbonate diffuser for optimum optical performance, • Hexa-cell (Matte Black) secondary reflector • Suitable for surface and suspended mounting • Supplied with standard suspension kit (1metre).• Cable entries for through-wiring of mains supply cable • Integral power supply • Suitable for operation on 240V,50Hz single phase ac supply• Driver Power Supply : Integral, Power Factor : >0.90, THD : <10%, Surge Protection : 4KV-6KV, Efficiency : >85%, IP 44 Rating.• Dimension: 1188 x 36 x 75, 2365 x 36 x 75, 3540 x 36 x 75.• Wattage Options : Upto 40W, Upto 80W, Upto 120W.• Mounting: Pendant Mounting, Pendant Mounting, Pendant Mounting, Surface Mounting, Surface Mounting, Surface Mounting • Product Finish options: Pure polyester powder coated, RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 9016 Traffic White • CE & BIS Certified • Inhouse NABL accredited lab. Philips SP170P LED25S-6500 PSU W5L113 OD WH Smartbright Linear 154 Supply of Input power : 8W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire madeof extruded aluminium alloy (grade 6063), die-cast aluminium of high corrosion resistance and non corrosive stainless steel fasteners. Translucent polycarbonate diffuser. Pressure die cast aluminium mounting plate Ø100.5mm x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD55 for surface mounting on floor. The base plate have a cable entry hole of 70 x 24 mm dia at the center. Single cable entrance via PG7 cable gland. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 2.5KV. Luminaire dimension : 106mm diameter x 565mm height. CE & BIS Certified. Foundation Bolt - 2 Nos of M8 Foundation J Bolt Length 150mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each BoltInhouse NABL accredited lab. PHILIPS Bollard BCP100 LED 10W PSU GR L 750mm Solar Light 155 Supply of LED Linear Lighting to suit ceiling / wall is a slim and elegantly designed fixture, suited for varied applications offers a uniform, glareless and soft lighting.Al. Profile Housing Dimension: 1000 x 17 x 8, 2000 x 17 x 8Mounting: Surface Mounting, Product Finish: Anodized Aluminum• Luminaire made of extruded aluminium for better thermal management • PC clear / semi clear matte diffuser for excellent diffused lighting experience throughout the life of the fixture • Designed for mounting on ceiling / wall • Cable entries for through-wiring of mains supply cable • To be used with LED strip & power supply unit of suitable rating. Brand Philips Profile Shine 240 LEDs/m LED Strip | 3000K Warm White | High Brightness Linear Strip for Cove, False Ceiling, Architectural, Ambient Lighting 156 Supply of 24V 2835 Flexible LED Strip, 12W/m, Non-Integral, CCT: 2700K, 4000K, 6500KDimension: 5m / Roll, IP : 67, Brand Name : K-Lite, Code : 7289 or equivalent 157 24V Power supply, IP 67 Rated SMPS suitable for 24V LED Strip lights. Wattage: 150W, 24V Series Waterproof IP67 Power Supply24Vdc 6.25 Amps 150W Power unitDimension: 313 x 43 x 34IP : 67,Brand Name : K-Lite, Code : 8198 or equivalent 158 Supply and fixing of Fans and Air Circulator 159 Supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star rated complete ( Higher end)with 2 module 100W fan step regulator (Higher end)with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 160 Supply and fixing of 600mm wall mounting Air circulator and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 161 Supply and fixing of 300mm(12)sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessaryaccessories and hardwares as required. 162 Supply and fixing oflouvers shutter arrangements for 300mm(12)sweep (Heavy duty) AC Exhaust fan complete 163 Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required. 164 Supply and Laying of 3 1/2 x 50 sq.mm. PVC Al.Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 165 Supply and Laying of 4C x 16 sq.mm. PVC AL. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.Main Panel to DB 166 Supply and Laying of 3C x 2.5 sq.mm. PVC Cu. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodMain Panel / DB to Street Lights 167 Supplying & Laying 120mm/103.5mm HDPE Pipe as per requirements including excavation & refilling. 168 Supply and fixing of double compression brass cable gland for following Aluminium conductorXLPE insulatedarmoured cable of 1100 V grade with earth connection. 169 Supply and fixing of brass cable gland for3 1/2 Cx 50 Sq.mm PVC LTUGAl. Armoured cable with earth connection 170 Supply and fixing of brass cable gland suitable for4C x 16 PVC Al. Armoured LTUG cable with earth connection. 171 Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cableLTUG cablewith earth connection. 172 Supply and providing cable end termination of the following sizePVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable) 173 Supply and providing cable end termination of3 1/2Corex 50Sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. 174 Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. 175 Supply and providing cable end termination of 3C X 2.5 SqmmPVC LTUGCopper cable with necessary copper cable sockets by crimping etc, with electrical connection complete. 176 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (SD-375) 177 Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)Higher End (SD-385) 178 Supply and fixing of 25A Flushtype Wall Socket 25A DPMCB complete set for ACPlug inflush with wall with earth connection (For AC Plug) 179 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed inwall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire and making good of the concealed portion withsuitable colour. ( SD 430 ) 180 Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe onconcealed wall and ceiling with continuous earth wire connection with painting of suitable colour. 181 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp andwithcopper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonrySD-233 182 Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection 183 Supply and Run of 1 of25.6.25 mm Al. Flat on wall / floor / ground for earth connection. 184 Supply and Run of 1 of25.6.25 mm Cu. Flat on wall / floor / ground for earth connection. 185 Supply, Installation, Testing and commissioning of 40 channel NVR with 4TB HDD * 4nos, Up to 40-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback.(Make: Hikvision/Dahua/Panasonic) 186 Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.All including suitable camera stand and accessories. (Make: Dahua/Panasonic) 187 Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Each Cameras, 1/2.8 CMOS,4 MP 2592 x1520 or better , triple stream, Min. Illumination required 0.005 Lux/F2.0 (Color,30IRE), 0 Lux/F2.0 (IR ON), 140dB True WDR, triple stream,3 to 12 mm, F1.4 to 2.8 , MFZ, Backlight Compensation, Highlight Compensation 3DNR, Privacy Mask, Internal/External Smart IR LEDs with up to 50m IR distance, H.265& |MJPEG, Inbuilt Video Analytics: Smart Motion Detection, Intrusion Detection, People Counting, Multiloitering, Face Detection, Line Crossing, Missing Object detection, [Unattended Object Detection. THe camera shall have inbuilt cyber security FIPS Chipset.Audio Stream Full Duplex, 1TB SD card support, IP 67 & IK10, Alarm: 1 In & 1out, PoE, H.265 High Profile and MJPEG, PoE Class . Certifications: ONVIF Profile S,G,T & M compliant, NDAA 889 UL, CE, EN, FCC & RoHS compliant and with all accessories and as per detailed tender specifications. 188 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). 189 Supply and Clamping of CAT 6 armoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylenev. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 190 Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point( Point to Point ) Crimping, Testing and arrangement charges. 191 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 192 Supply and Fixing of Rack with Accessories -Higher end 12 U Rack with LNS unit and fan extra for the above rack. 193 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 194 PA SYSTEMS 195 Supply,installation, testing and commissioning of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - BOSCH) 196 Supply, installaion, testing and commissioning of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH) 197 Supply, installation, testing and commissioning of Goose Mic 198 Supply and installation ofHandheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) (Market rate) 199 Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers. 200 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 201 Supply and erection, testing and commissioning of 2.0 TR (6000K.cal/hr) ABS Split type Air conditioner (3 star rating)confirming to IS : 1391(part-2) 1992 with Admt No.1 fitted withhermetically sealed air compressor operating on refrigerant R-410A suitable for wall mounting for operation on 230V 50 HZsingle phase AC supply inverter technology with capable of thefollowing performinga) Coolingb) Dehumidifyingc) Air circulatingd) Filteringe) Refrigerant pipe lines – 6 mtr lengthThe installation works for the above split type AC units includethe following1. Mounting / fitting indoor and outdoor units at theirrespective locations2. Laying refrigerant pipe line of required length notexceeding 6 meters distance & connecting both units afterdrilling hole/holes in the wall is required, thickness of the coppertubing shall not be less than 0.7 mm3. Installing the section pipe with expanded polythene foamtubing4. Laying drain pipe to throw out the condensate water beingformed within indoor unit5. Leak testing the entire system unit6. Charging refrigerant gas in the unit7. Suitable electrical wiring with to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoorunit upto 6 meter length and upto switch within 3 meters oflocation of indoor unit. (Like (Carrier / Voltas / Blue Star /Equivalent) as directed by the department officers 202 Supply and fixing of 5 KVA slim and wall mounting (V Guardmake ) double booster voltage stabilizer for operation on 170-230V 50Hz single phase AC supply capable for 2 TR split ACwith necessary inter connection and earth connection as directedby the departmental officers. 203 LANDSCAPE 204 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 205 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 206 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 207 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 208 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 209 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 210 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Tamil Nadu View Result →
13.
Educational and Research Institute #10212966 Price Bid
Lecture Capture Studio , 4K Ptz Camera • Sensor - 1.0 Inch-Type Cmos • 15X Optical Zoom, 20X Digital Zoom • Effective Pixels Approx. 8.29 Megapixels (3840 X 2160) • Lens - F=8.3 – 124.5 Mm, F/2.8 – 4.5, 15X Optical Zoom, 9-Bladed Iris Diaphragm • Focal Length F=8.3 – 124.5 Mm, F/2.8 – 4.5, 35Mm Equivalent Focal Length: Approx. 25.5 (W) – 382.5 Mm (T) • Angle Of View Horizontal: 73.0 (W) – 5.7° (T) Vertical: 45.2° (W) – 3.2° (T) • Min. Illumination - 1.5 Lux At Uhd • Shutter Speed 1/3 – 1/2000 Sec • Gain = -6.0 Db~ 33.0 Db • Nd Filter - Built-In (Off, 1/4, 1/16, 1/64), Motor Operated • Focus - Focus Mode: Manual, Af-Boosted Mf, Continuous Af, Face Af, Tracking Af Type: Dual Pixel Cmos Af, Contrast Af • Gamma - Normal1 (Standard), Normal2 (X4.0), Normal3 (Bt.709), Normal4 (X5.0), Wide Dr, Oem Log 3 • Pan And Tilt - Pan Operation Range: Horizontal ±170° Pan Operation Speed: 0.1° – 100°/Sec. Tilt Operation Range: Vertical -30° – +90° Tilt Operation Speed: 0.1° – 100°/Sec. • Protocol -Xc, Rtsp/Rtp, Ndi|Hx, Rtmp/Rtmps, Standard Communication (Serial), Standard Communication (Ip), Srt, Freed • Video Output Format: Sdi - 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit)1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Hdmi 3840 X 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 Bit) 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit) 1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Ip 3840 X 2160: 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1920 X 1080: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1280 X 720: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 640 X 360: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) • Gen-Lock Terminal - Bnc Jack X 1, 1.0 Vp-P/75 O, Input Only • Audio Input- 2X Xlr/Audio Input (3-Pin Jack)Balanced Sensitivity (Mic): -60 Dbu Sensitivity (Line): +4 Dbu , 4K Ptz Camera • Sensor – ½.5”Inch-Type Cmos Sensor Or Better • 20X Optical Zoom, 20X Digital Zoom • Effective Pixels Approx. 8.29 Megapixels (3840 X 2160) • Lens - F=3.67 – 73.4 Mm, F/1.8 – 2.8, F/2.8 – 4.5, 15X Optical Zoom, 9-Bladed Iris Diaphragm • F=3.67 – 73.4 Mm, F/1.8 – 2.8, 20X Optical Zoom, 8-Bladed Circular Aperture 35Mm Equivalent Focal Length: [4K Uhd] Approx. 29.3 (W) – 601 Mm (T) [Full Hd] Approx. 30.5 (W) – 627 Mm • Focus - Focus Mode: Manual, Af-Boosted Mf, Continuous Af, Face Af, Tracking Af Type: Dual Pixel Cmos Af, Contrast Af • Gamma - Normal1 (Standard), Normal2 (X4.0), Normal3 (Bt.709), Normal4 (X5.0), Wide Dr, Oem Log 3 • Pan And Tilt - Pan Operation Range: Horizontal ±170° Pan Operation Speed: 0.1° – 100°/Sec. Tilt Operation Range: Vertical -30° – +90° Tilt Operation Speed: 0.1° – 100°/Sec. • Protocol -Xc, Rtsp/Rtp, Ndi|Hx, Rtmp/Rtmps, Standard Communication (Serial), Standard Communication (Ip), Srt, • Video Output Format: Sdi - 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit)1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Hdmi 3840 X 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 Bit) 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit) 1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Ip 3840 X 2160: 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1920 X 1080: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1280 X 720: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 640 X 360: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) • Gen-Lock Terminal - Bnc Jack X 1, 1.0 Vp-P/75 O, Input Only • Audio Input- 2X Xlr/Audio Input (3-Pin Jack)Balanced Sensitivity (Mic): -60 Dbu Sensitivity (Line): +4 Dbu , Ptz Camera Control Number Of Camera Groups - 10 Groups With Up To 10 Cameras Per Group • Maximum Number Of Connected Cameras – 100 • Ptz Camera Remote Controller Compatible With Above Camera And From Same Oem • Appoint Up To 100 Pre-Set Angles Per Camera Using The 17.78Cm Touchscreen • A Multi-Function Joystick Allows Precise Adjustment Over Camera Movements And Settings While A Control Grip On Top Of The Stick Allows Zoom, Focus And Iris Control. • Display Lcd 7 Touch Screen Displays Menus & Key Camera , Camera Support System • Type: Professional Tripod System (With Fluid Head) • Maximum Load Capacity: 7 Kg (15.4 Lbs) • Height Range: Minimum Height: 70 Cm (27.6 Inches) Or Lower Maximum Height: 160 Cm (62.99 Inches) Or Higher • Leg Sections: 3 Sections Per Leg • Leg Lock Type: Twist-Lock System • Material: Aluminum Alloy (Tripod Legs), • Head Type: Fluid Head • Tilt Range: +90° To -75° Or Better • Pan Range: 360° Pan • Counterbalance System: Yes (With Adjustable Counterbalance) • Pan & Tilt Drag: Adjustable For Smooth Movements • Mounting Plate: 75Mm Ball Base For Easy Leveling And Support • Quick Release Plate: Yes (Compatible With Quick-Release Systems) • Leg Tip Type: Rubber Or Spiked Feet, Adjustable • Leveling System: Built-In Bubble Level For Accurate Leveling Additional Features: • High Stability For Professional Video Shooting • Smooth Fluid Head For Stable Panning And Tilting • Lightweight And Portable For Field Use • Durable, Ideal For Both Indoor And Outdoor Shooting Environments , Dolly For Tripod • Type: Professional Camera Dolly System • Compatibility: Compatible With Most Tripods, Especially With The Above Tripod • Maximum Load Capacity: 30 Kg Or Higher • Dolly Base Dimensions: 65 Cm X 82 Cm (25.6 X 32.3) • Leg Length Adjustment: Adjustable Leg Lengths To Suit Different Tripod Heights • Wheel Type: Durable Rubber Wheels (With Ball Bearings) • Wheel Locking System: Yes (Individual Wheel Locks For Stability) • Wheel Size: Large Wheels For Smooth Movement Over Different Surfaces • Wheel Rotation: 360° Rotation For Flexible Movement , Video Production Switcher Hand Carry Switcher- 6-Ch Hd Portable Video Streaming Studio (1080I/720P) Hand-Carry Portable Production Unit, Designed As A Suitcase Providing; 6-Ch Hd Input Digital Video Switcher W/ Xpt Assignment, Ftb, Mix, Cut, Wipe Effects,Pip & 2X Dsk, Tally/Gpi Output, With A Built-In 17.3” Fhd Monitor And A H.264 Streaming Encoder And Recorder For Simultaneously Live Streaming & Recording. 6 Video Input: 4X Hd-Sdi + 2X Hdmi5 Video Output: 2 X Sdi (Aux/Pvw/Pgm/Pgm Clean), 3X Hdmi (Pgm) , File Based Full Hd Video Recorder / Player Professionalssd 3G Video Recorder With 2 X 2.5 Ssd Slot / 2 X Sdxc Card Slot / 1 X 3G Sdi Input With Loop Output / 2 X 3G Sdi Output / 1 X Hdmi Input / 1 X Hdmi Output / Ethernet 10G Port For Deck Control And Fast File Transfer / 1 X Usb Type-C 3.0 (Up To 5Gb/S) For External Drive Recording, Webcam Out, Software Configuration Andupdates. To Be Quoted With Compatible2 X 1Tb Ssd Drives And Compatible Reader. , Wireless Lapel Microphone –Dual Transmitter Single Receiver Transmitter Wireless Mode Operating Frequency 2.400-2.4835 Ghz Bluetooth Protocol Br/Edr Bluetooth Operating Frequency 2.400-2.4835 Ghz Battery Capacity 360 Mah Battery Energy 1.39 Wh Battery Voltage 3.87 V Operating Time 6 Hours Receiver Dimensions 54.20×28.36×22.49 Mm (L×W×H) Operating Frequency 2.400-2.4835 Ghz Battery Type Li-Ion Battery Capacity 360 Mah Battery Energy 1.39 Wh Battery Voltage 3.87 V Charging Specification Max 5 V Charging Time 70 Mins Operating Time 6 Hours Transmitting Distance: 100 Meters , Wireless Handheld Microphone • Digital Transmission: Operating In The Uhf Spectrum, Enhancing Range, Reliability, And Scalability. • Smart Assist App: Connects Via Bluetooth Low Energy For Streamlined Setup And Operation. • Auto Scan: Creates Reliable Connections With Minimal Time And Effort. • Audio Input Dynamic Range: 134 Db, Eliminating The Need For Sensitivity Adjustments. • Equidistant Tuning Grid: Channels Can Be Placed 600 Khz Apart, Simplifying Frequency Coordination. • Tuning Bandwidth: 56 Mhz, Enabling Up To 90 Channels. • Selectable Frequencies: 2,240 Allow For Fine Tuning. • Battery Life: Up To 12 Hours With A Lithium-Ion Battery Pack, Or Up To 8 Hours With 2X Aa Batteries. • Audio Frequency Response: 20 Hz - 20 Khz (-3 Db) @ 3 Dbfs, 50 To 18,000 Hz • Frequency Response: 50 To 18,000 Hz • Polar Pattern: Cardioid. • Transducer Principle: Dynamic. • Max. Sound Pressure Level: 130 Db. • Dynamic Range: >134 Db. • Equivalent Noise Level: 32 Db. • Audio Output Level: 18 Dbu Max • Connectors: 3.5Mm, 6.35Mm (1/4-Inch) Output, Xlr Out , Pen Tablet Display 24 (+ Or – 1”)Uhd Resolution 3840X2160@60Hz Pro Pen 2, 10 Point Multi Touch, Battery Free Stylus Pro Pen 3, 8 Express Keys, 12 Ms Response Time, Brightness 300 Cd/M2 , Computer System For Interactive Display • Processor – Latest Generation I5 Processor Or Better • Ram- Min 16 Gb Or Better • Storage – 500Gb Ssd Or Better • Graphics Card – 2Gb Min. Or Better • Display – 19.5” Or Higher • Peripherals – Keyboard And Mouse • Os – Windows Os , 100W Led Panel Light • 100W Led Soft Panel Light • 5600K Colour Temperature. Cri,Tlci And R9 Value Above 95. • Uniform Shadowless Output, No Heat From Light, No Uv Radiation, • Control Mode:- Manual And Dmx Control Mode Through 5Pin Xlr. • Extreme Soft Illumination With Diffuser. • 0 ~ 100% Linear Dimming. • Black Powder Coated Fabricated Housing With Normal Yoke But With Barndoor And Safety Chain. • Light Fixture Mounting Clamp Customized For Suspending On Fixed Bars On Stage Made Up Of Aluminium Or Ms Material Complete With Black Powder Coating Matt Black Finish. With Spud. , Ceremic Green Or White Board • 12X4 Feet Resin Coated Ceramic Green/ White Board For Class • Room With Chalk And Duster Holder. • The Board Should Be Suitable For Academic Purpose And 1 • Framed In Double Sided Curved Anodized And Chrome • Plated Abs Corners For Good Aesthetics And Longevity. • To Be Covered With Pelmut With Lighting , Motorized Chroma Screen • Motorized Screen For A Dimension Of 9 Ft W X 9 Ft H • Having Easy Remote-Control Option To Move The Screen, • Uniform Noiseless Movement With Required Mounting Arrangement With No Frills Or Folds During Continuous Operation , 75-Inch Professional Display. Display Panel: • Screen Size: 189.3 Cm Diagonal • Aspect Ratio: 16:9 • Resolution: 3840 X 2160 (Uhd) • Panel Technology: Ips With Direct Led Backlighting • Brightness: 500 Cd/M² • Viewing Angle: 178° Horizontal And Vertical • Operation Hours: 24/7 Connectivity: • Hdmi Inputs: 4 Hdmi Ports • Usb Inputs: 4 Usb Ports (2 Usb 2.0, 1 Usb 2.0 Internal, 1 Type-C) • Displayport Input: 1 Dp 1.2A • Displayport Output: 1 Dp 1.2A • Rf Input: 1 Side • Av Input: 1 Mini Av Side • Rj-45 (Ethernet): 1 Side • Spdif Out: Yes Supported Formats: • Picture Formats: Bmp, Png, Gif, Heif • Video Formats: Mpeg1/2/4, Xvid, H.263/264/265, Wmv, Vc1, Vp9, Rm, Avs, Sorenson, Motion Jpeg, Av1 • Audio Formats: Pcm, Amr, Lpcm, Ra, Mpeg1/2/4, Aac, Wma, Ac4, Eac3, Ms11, Ms12, Flac, Vorbis, Dolby Truehd, Dts Audio: • Output Power: 10W + 10W • Features: Dolby Audio Main Features: • Hotel Mode: Yes, Basic • Cec: Yes, Basic • Sound Out (Arc): Yes • Hdr Support: Hdr10, Hlg • Bluetooth: Yes • Wi-Fi: 802.11A/B/G/N/Ac, 2.4Ghz/5Ghz, Built-In System On Chip (Soc) Specifications: • Cpu: Cortex-A55 X4, 1.3Ghz • Gpu: Mali G31 Mp2, Open Gl Es3.2 • Operating System: Android Tv R - 11.0 • Memory: 16Gb Emmc Storage, 2Gb Ddr3 Ram , 21 Broadcast Display Display Panel: • Screen Size: 21.5 Inches • Resolution: 1920 X 1080 (Full Hd) • Aspect Ratio: 16:9 • Brightness: 250 Cd/M² • Contrast Ratio: 1000:1 • Color Depth: 8-Bit (16.7 Million Colors) • Viewing Angle: 178° Horizontal And Vertical • Response Time: 7 Ms Connectivity: • Video Inputs: O 2 X 3G-Sdi Bnc O 1 X Hdmi 1.3 (Optional) • Video Output: O 1 X 3G-Sdi Bnc • Audio: O 16-Channel Audio Meters (Up To 8 Channels Displayed Simultaneously) O 2 X 8O/2W Speakers (Rear-Mounted) O 3.5Mm Headphone Jack O Sdi Embedded Audio Support Supported Video Formats: • Hdmi: O 480P/60, 480I/60, 576I/50, 576P/50 O 720P/50/60 O 1080I/50/60 O 1080P/24/25/30/50/60 • 3G-Sdi: O 1080P (50/60) • Hd-Sdi: O 1080I (60/59.94/50) O 1080P (30/29.97/25/24/24Sf/23.98/23.98Sf) O 720P (60/59.94/50/30/29/25/24/23.98) • Sd-Sdi: O 480/59.94I, 576/50I Additional Features: • 3D Lut Loading For Color Calibration • False Color For Exposure Analysis • Zebra Pattern For Highlight Indication • Waveform And Vector Scope For Signal Analysis • Audio Level Meters • Safety Markers And Aspect Ratio Markers • Gpi Control • User-Defined Shortcut Keys , Audio Mixer 10-Channel Analog Mixer With Built-In Usb Audio Interface And Spx Digital Effects, Inputs: • 4 X Mic/Line (Xlr/Trs Combo) • 3 X Stereo Line (1/4 Trs, Rca) Outputs: • 2 X Main Out (Xlr, Balanced) • 2 X Monitor Out (1/4 Trs, Balanced) • 1 X Headphone Out (1/4 Trs) • 1 X Fx Send (1/4) Usb Audio Interface: • 2-In/2-Out (24-Bit/192Khz) • Compatible With Mac, Windows, Ios (With Adapter) Input & Processing: • Preamps: Class-A Mic Preamps • Phantom Power: +48V (For Condenser Mics) • Eq: 3-Band Eq (High, Mid, Low) On Mic/Line Inputs • Compression: 1-Knob Compressor On Channels 1-2 • High-Pass Filter: 80Hz On Mic Inputs Usb Interface For Daw Recording And Streaming , Speakers 2-Way, Bass-Reflex Surface-Mount Speaker Speaker Type:2-Way, Bass-Reflex Components: • Low-Frequency Driver: 8 Cone • High-Frequency Driver: 1 Soft Dome Tweeter Frequency Response: • -10 Db: 51 Hz – 20 Khz Coverage Angle: • Horizontal: 100° • Vertical: 100° Power Handling: • Noise: 90W • Program: 180W • Maximum: 360W Sensitivity: • 91 Db Spl (1W, 1M) Maximum Spl: • 117 Db Spl (Calculated, 1M) Impedance: • 8O Transformer Taps (For 70V And 100V Systems): • 100V: 60W (170O), 30W (330O), 15W (670O) • 70V: 60W (83O), 30W (170O), 15W (330O), 7.5W (670O) Crossover Frequency: • 2.8 Khz , Amplifier 2-Channel Power Amplifier Designed For Professional Audio Applications, Offering High Output Power And Advanced Processing Capabilities. Below Are Its General Specifications: Amplifier Type: • Class-D Amplifier With Custom Lsi Chip Power Output: • Stereo Mode: O 8O: 300W Per Channel O 4O: 500W Per Channel O 2O: 300W Per Channel • Bridged Mode: O 8O: 600W O 4O: 1000W Frequency Response: • ±1.0 Db (1W, 8O, 20Hz To 20Khz) Total Harmonic Distortion (Thd): • 0.1% At 1Khz, 10W • 0.3% At 1Khz, Half Power Signal-To-Noise Ratio (Snr): • 101 Db (A-Weighted, 8O, Gain Setting = +14Dbu) Crosstalk: • Less Than -60 Db (Half Power, 8O, 1Khz, Volume Max Input 150O Shunt) Inputs: • 2 X Xlr • 2 X 1/4 Trs Outputs: • 2 X Speak On Nl4 • 2 X Binding Post • 2 X 1/4 Ts Cooling System: • Dual 16-Step Variable Speed Fans With Front-To-Rear Airflow Digital Signal Processing (Dsp): • Onboard Eq, Limiting, Delay, Crossovers (Saved Via Usb Type A Port) , Hdmi Splitter • Video Input/Output - Input: 1 X Hdmi, Output: 4 X Hdmi • Video Format Hdmi Supported Resolutions 4096X2160p60/59.94/50 4096X2160p30/29.97/25/24/23.98 3840X2160p60/59.94/50 3840X2160p30/29.97/25/24/23.98 1080P60/59.94/50, 1080P30/29.97/25/24/23.98 1080I60/59.94/50, , 720P60/59.94/50 480P, 576P, 480I, 576I Pc Supported Resolutions 640X480@60Hz, 800X600@60Hz, 1024X768@60Hz, 1280X720@60Hz, , 1280X768@60Hz, 1280X960@60Hz, 1280X1024@60Hz, 1360X768@ 60Hz, 1366X768@60Hz, 1400X1050@60Hz, 1680X1200@60Hz, 1920X1080@60Hz, 1920X1200@60Hz Video Processing Hdr 4K2k@60 4:2:0 10Bits 4K2k 60Hz Ycbcr4:4:4 8Bit/Ycbcr4:2:0 10Bit 4K2k 30Hz Ycbcr4:4:4 8Bit Video Bandwidth - Single-Link 600Mhz (18Gbps) Audio Format -Dts-Hd Master Audio, Dolby Truehd, Dolby Digital, Dts, Dvd-Audio, Lpcm, Sacd, Mpcm , Up/Down/Cross Converetr • Type - Up/Down/Cross Conversion • Input -Vga X 1, Hdmi X 1 , Hd/Sd-Sdi X 1 Or Better • Output - Sdi X 2, Hdmi X 1, Sdi Loop Thru Bnc Or Better • Supported Video Output Formats:1080P60/59.94/50, 1080P30/29.97/25/24/23.98, 1080I60/59.94/50, 720P60/59.94/50, 525I, 625I • Audio Format (Input):Analog Audio L/R: Stereo Audio • Sdi / Hdmi Embedded Audio • Audio Format (Output):Sdi Embedded Audio Up To 8Ch, 48Khz, Pcm Audio • Hdmi Embedded Audio Up To 8Ch, 48Khz, Pcm Audio , Bidirectional Sdi – Hdmi Converter • Sdi Video Inputs -1 X Sd, Hd Or 3G-Sdi. • Sdi Video Outputs - Automatically Matches The Hdmi Video Input. • Hdmi Video Inputs - Hdmi Type A In. • Hdmi Outputs - Hdmi Type A Out. • Multi Rate Support - Auto Detection Of Sd Or Hd • Psu , Usb Capture Device • Input Interface - One Sd/Hd/3G Sdi Input + Embedded Audio • Support Input Resolution Up To 2048×1080 Pixels • Host Interface - Usb 3.0, Compatible With Usb 2.0 • Os Support - Windows, Linux, Mac, Chrome Os • Capture Format - Support Capture Resolutions Up To 2048X1080 • Support Capture Frame Rates Up To 120Fps • Support 2-Channel Audio Streams • Capture Sdi Signals Transmitted A Long Distance Away: Up To 150M For 3G-Sdi Signals • Included Software - Usb Capture Utility, Capture Express, Etc. • Compatible Software Zoom Rooms, Microsoft Teams Rooms, Skype For Business, Google Hangouts, Gotomeeting, Vlc, Obs Studio, Xsplit, Etc. • Auto Detection Of Input Signal Format • Windows, Linux And Mac Sdk • Continuously Work For 24Hx7 • Led Status Indicator , Professional Headphone • Type: Over-Ear, Closed-Back Headphones • Frequency Response: 8 Hz - 25,000 Hz • Impedance: 64 Ohms • Sensitivity: 113 Db (At 1 Khz) • Max Spl (Sound Pressure Level): 113 Db • Driver Type: Dynamic, Neodymium • Total Harmonic Distortion (Thd): <0.1% (At 1 Khz, 100 Db Spl) • Cable Length: 3 Meters (Detachable Coiled Cable) • Connector: 3.5 Mm Stereo Jack With 1/4 (6.3Mm) Adapter , Installation Materialincluding Branded Video Cables, Audio Cables, Convertor, Connectors, Rack And Otherinstallation Materials. , Installation And Integration Charges. Preferred Concealed Cabling ,The Installation Should Be Executed By Professionals And Verified By Oems Authorized Personnel , Workstation - I9 13900/32Gb/512Ssd/4Tb Hdd/T400-4Gb/Win11 Pro With 27 S2722qc - 4K Monitor , Warranty: Minimum Three Years For Equipment And Installation Services
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Tamil Nadu View Result →
14.
Housing Urban and Rular Development #10191469 AOC
Furnishing Work Of Classrooms, Library And Laboratory, Equipments And Miscellaneous Work For The New University Campus Of Binod Bihari Mahato Koyalanchal University, Dhanbad- 1 Supplying Metal Exhaust Fan 300 mm Sweep-Supplying, erecting and testing of approved make 300 mm sweep Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including frame bolt/ Anchor hole fastners etc, complete finished of a as required. 2 Wall Demolition- Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 3 Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 4 Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5 Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 6 Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 7 Door Frame- Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile C - Fixing with adjustable lugs with split end tail to each jamb 8 Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. 9 Extra for providing and placing in position 2 Nos 6mm dia. M.S. barsat every third course of half brick masonry. 10 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.-Granite stone slab colour black, Cherry/Ruby red-Area of slab over 0.50 sqm 14 Sink- Supplying fitting and fixing white glazed fires clay sink of approved make with overflow arrangements supported on C.I. Or R.S. Painted bracket 40mm. Dia C.P. Brass waste with C.P. Brass chain and rubber plug 40mm dia P.V.C. Waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams including cutting wall and making good the same etc. all complete as per specification and direction of E/I. Size-600 mm x 450 mm x 250 mm ) 15 FULL HEIGHT WOODEN PARTITION WITH PARTLY GLAZING- Providing and fixing partitions made of 50 mm x 50 mm pine wood / 2nd class teak wood @ 600 mm c/c both ways with the help of Fasteners/Screws etc. to achieve desired strength. Providing & fixing Comm. grade 12 mm thick commercial Pty board on the frame on both the faces i/c exposed side edges of Frame & 1.0mm thk Laminate on both outer faces and exposed side edges of ply as per the directions. Partition shall also be provided with 8 mm thick clear float glass of approved size with Polished Edges of approved brands in Wooden Partition Openings as required, fixed from all four sides from both ways inside partition openings with 10mm.tk. T.W. beadings/12 mm thick MDF Board Lipping/D-Buttons of design as per approval and direction at site. Etching / Etching Film (50 Microns) is to be provided as per approved pattern on 8 mm thick clear float glass. All wooden exposed surfaces shall be melamine polished in approved shade and texture finished as per the directions and satisfaction of Engineer In charge, compelete.This work will 16 Frosted glass sheet of nominal thickness 4 mm- Providing and pasting frosted film on glass work including all materials tools, plants and labour complete as per the directions of the Engineer-in-charge. 17 Supply & laying of PVC insulated and sheathed 1.1 kv grade twin twisted 1.5 sqmm cu flexible wire for speaker. 18 Providing & installation 1.5 Tr. 5 Star split A.C (Inverter Type) I91391-part-1 19 Copper refregerant pipe-Providing & installation Copper Tube of size 5/8 for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation 20 Providing & installation 5 KVA wall mounted automatic voltage stablizer from range 140 V to 280V 21 Providing & installation Drain Pipe for AC 22 Non Schedule 23 * PROVIDING AND SUPPLYING MODERN DESIGN RECEPTION DESK IN ENGINEERED WOOD MAKE THE PRODUCTS UTILE AND A DELIGHT.TIMELESS DESIGN THAT ELEVATES YOUR OFFICE SPACE STRUCTURE OF SPACIOUS RECEPTION DESK,TABLETOP OFFERS YOU A GENEROUS LOOK FOR WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1800 MM(L)X 600 MM(D)X 750 MM(H) WHICH GIVE MORE SURFACE AREA FOR WORK ,TABLE TOP MADE OF25MM THICK ALSO TABLE TOP BASED ON SIDE PANELS MADE 18MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * COMBINATION CONSTRUCTION OF RECEPTION DESK ABOVE TABLE TOP 18 MM THICK COUNTER TOP TO TABLE TOP HEIGHT IS @ 300MM ,OVERALL RECEPTION DESK HEIGHT IS @ 1050MM WITH COUNTER TOP,TABLE TOP MADE 25 MM THICK PRELAM PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK PVC EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED WITH HOT MELT GLUE.ALONG WITH 18MM THK ADDITIONAL MODESTY PANEL SIZE IS 1350 MM (L) X 700 MM (H) MADE BY EXCLUSIVE FROSTY WHITE COLOUR WITH EPIC DESIGN & LOOK.1 MOBILEPEDESTAL (2 DRAWERS + 1 FILING CABINET )SIZE IS 450 MM(L)X 450 MM(D)X 725 MM(H) IN PROVIDED WITH CENTRAL LOCKS FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING & PEDESTALS MOVE ON NYLON CASTORS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST 24 PROVIDING AND SUPPLYING * MEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 580MM(L)X 670MM(D)X1110MM(H) ,*THE CHAIR MADE OF FULL UPHOLSTERY IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM. SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 480MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1110MM & MINIMUM HEIGHT IS1010MM* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . 25 PROVIDING AND SUPPLYING 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION,THREE SEATERTYPE WAITING AREA CHAIR - MATERIAL : STAINLESS STEEL SIZE 1820MM(L)X 690MM(D)X 790MM(H) COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 26 Supplying of Portrait/Landscape Not applicable Fabric Pin Up Notice Boards(Fabric Pin Up Notice Boards 3 X 6 FT GREEN),Specification-Width of Board in mm:900 mm,Colour(Front/ Display layer):Green,Height of Board in mm:1800mm,Rear panel material of Board:Laminated sheet,Overall pinability depth ofBoard in mm:9 millimeter,Core material thickness inmm:9 millimeter 27 PROVIDING AND SUPPLYING COLLEGE DESK TOMKINS MATERIAL : PRELAMINATED PARTICLE BOARD WITH M.S BASE UNIT SIZE : 590 MM(L) X 1090 MM(D) X 830 MM(H) PER SEAT SIZE- 590 MM X 375 MM X 450 MM/ONE SEATER DESK SIZE :1090 MM(L) X830 MM(H) COLOUR : AVAILABLE ON REQUEST/FINISH : EPOXY POLYESTER ,* PROVIDING & SUPPLYING TWO SEATER COLLEGE DESK TOMKINS COMBINATION OF THREE ROWS FIRST , MIDDLE AND LAST SCRATCHPROOF EASY WIPE TOP / DURABLE ,STRONG & SAFE,UNDERSTRACTURE MADE OF MAIN FRAME MDE OF CRCA POWDER COATED IS GRAD:304 M.S BLACK POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) EPOXY POLYESTER COATING.* TABLE TOP & MODESTY PANNEL MADE IN 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS.CHAIR WITH GAS LIFT ,A). BACK FRAME: 1.2MM COLD ROLLED STEEL/B). BACK BOARD: 10MM PLYWOOD, NO CUSHION C). SEAT BOARD: 15MM PLYWOOD, NO CUSHION/D). TIP-UP SYSTEM: SPRING MECHANISM E). 2. LEG: COLD-ROLLED STEEL, FIXING ON THE FLOOR BY SCREWS, 80 X 35 X 1.5MM THICK OVAL TUBE, BLACK POWDER SPRAYING.* THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST 28 Supplying of Material & Subtype Engineered Wood Table Top Material Engineered Wood Finish Matte Colour & Colour Family Brown - Classic Walnut Dimension (W)550mm X (D)550mm X (H)1200mm Size Compact Assembly Type Knock Down (Obelisk), 29 Suppling of Writing Board ( 4x10 Non-Magnetic) of material Top Surface materials (Used for white boardsurface)-Porcelain,Top surface material thickness -0.7 mm to 0.8 mm,Frame material -Anodized extruded aluminum alloy hollow section conforming to IS 733 (With latest amendment),Frame wall thickness-1.2 mm,Frame section front -20 mm,Frame section side -16 mm,Core material-MDF board grade-I conforming to IS 12406 (with latest amendment),Core material thickness -9 mm as per Department incharge 30 Supplying of 14 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 8850 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 8850 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, 31 Supplying of * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : MARVEL/HB/ECO ,* ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1380MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM . * ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) , SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1380MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 32 Supplying ofMEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1125MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM .* ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) ,SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1125MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 33 Supplying of Tte Mild Steel Pipe of diameter 19 mm and wall thickness 16gauge. Classroom Chairs, tte,Thickness-2mm to 45mm,Material-Mild Steel Weight-Depends upon the size,Outside Diameter-0.80 Inch to 36 Inch 34 Supplying of 1-Bay Sprocket Chain Drive Mechanism MobileStorage Compactors,Material-Mild Steel Product Type-1 Bay,Height -7 ft,Storage Capacity-50-80 kg Usage/Application office, Home, Hospital, Store Room, Warehouse 35 Supplying of -- Movable File StorageSystem (Compactor) 1-Bay Mechnized Drive Type(COMPACTOR 2 ( 04 BODY)) 36 Supplying of Methodex MS1-6MCMETHODEX(Methodex MS1-6MC),Accutec Mobile Storage System,Material SS,Usage/Application-Warehouse Height-8-10 Feet,No of Layers-5 37 Supplying of : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 38 Supplying of : PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 39 Supplying of* HIGH BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 590MM(L)X 505MM(D)X1280MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : KNEE TILT MECHANISM . * ONLY SEAT SIZE IS 505MM(L)X 505MM(D)X610MM(H) & THE BACK SIZE IS 590MM(L)X 710MM(H) SEAT MAXIMUM HEIGHT IS 610MM & MINIMUM HEIGHT IS 510MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1280MM & MINIMUM HEIGHT IS1180MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . 40 Supplying of* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 570MM(L)X 500MM(D)X940MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED. * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 570MM(L)X 500MM(D)X475MM(H) SEAT HEIGHT IS @ 940MM & BACK HEIGHT IS @ 475MM . * FIXED CANTILEVER CHAIR . * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 41 * SUPPLYING AND PLACING FIVE SEATER (3+1+1) EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 3 SEATER- 1905MM(L) X890MM(D)X 870MM(H)SOFA SIZE IS 1 SEATER -(W)960mm X (D)890mm X (H)870mm ,WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. 42 Supplying of Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass,Frame Material Solid Wood Leg Material Solid Wood,Finish Matte Colour & Colour Family Brown - Walnut,Dimension (W)1130mm X (D)630mm X (H)410mm,Number Of Recliners 1 Number Of Reclining Positions 3,Size Standard (HOPPER/CT), 43 Supplying of6 SEATER Rectangular MEETING TABLE DURIAN MODEL SMART/CON/6FT MADE OF PRELAMINATED PARTICLE BOARD WITHSLANTLEGS50X50 MM MS UNDERSTRUCTURE IN POWDER COATING 2TOP MADE OF25MMTHICK PRELAMINATED PARTICLE BOARD IN FROSTY WHITE COLOR WITH MAIN TABLE SIZE1800MM(L)X 1050MM(D)X 750MM(H) (SMART/CON/6FT/A), 44 SUPPLYING & PROVIDING CAFETERIA CHAIR SIZE IS 381MM(L)X 419MM(D)X839MM(H) A COMBINATION OF SYNTHETIC FIBER WITH STAINLESS STEEL MAKE THE PRODUCTS UTILE AND A DELIGHT, THE COMPLETE STRUCTURE SHALL BE MADE UP OF 20% GLASS FILLED BLOW MOLDED HIGH-DENSITY POLYETHYLENE ANDIS,THE FRAME STRUCTURE SHALL BE SUPPORTED BY ( 2 STRAIGHT + 2 SLANT ) FOUR LEGS.THE TUBULAR WELDED FRAME IS MADE FROM DIA2.22 +/- 0.03CMX 0.12+/- 0.0128 CM AND 3.5+/- 0.03 CM X 0.12+/- 0.0128 AM STAINLESS STEEL 202 GRADE TUBE & THE TUBE ARE BUFF POLISHED TO GIVE SHINY FINISH.SEAT AND IN BACK GIVEN HANDLE TO HOLDARE MADE OF INJECTION MOULDED HIGH IMPACT STRENGTH POLYPROPYLENE POLYMER COMPOUND WITH INDOOR GRADE UV RESISTANCE AND PRESSED FITTED WITH LEGS.THE CHAIR IS EASY TO STORE WHEN NOT IN USE, SINCE YOU CAN STACK UP TO 6 CHAIRS ON TOP OF EACH OTHER. (COCO/SUR). 45 SUPPLING OF METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1830MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET.HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, FITTED WITH MS BODY LOCK & HANDLE. WITH 2 NUMBERS OF GLASS DOOR SHUTTERS , THE GLASS USED SHALL BE 4MM THICK CLEAR. UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 30 KG MAXIMUM.EACHRACKSHALLBEPROVIDEDWITHSTIFFENERATBOTTOMFOR STRENGTH.THE ENTIREBODYPANELAND SHELF SHALLBEMADEOF HIGHYIELD STRENGTH,THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY 46 SUPPLING OF DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 750MM(D)X 750MM(H) 36MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITHWENGE FINISH, USING HOT MELT GLUE TO FIXING 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 25MM THICK.*PROVISION OF SIDE RUNNER OF SIZE IS 750MM(L)X 450MM(D)X 760MM(H) ,( CONSTRUCTION IS FROM RIGHT SIDE OF SIDE UNIT TOP BASED ON FIXED PEDESTAL WITH SS STUD OF GRADE 304, ON TABLE TOP PVC GROMENT HOLEFOR WIRE MANAGEMENT .*FIXED PEDESTAL OF SIZE450MM(L)X 450MM(D)X 650MM(H) PER DRAWER HEIGHT IS @ 136MM, FILLING DRAWER HEIGHT IS @ 300MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 47 SUPPLING OF* CANTILEVER CHAIR SKU : 70011/CN/A, * ALL OVER SIZE IS : 590MM(L)X 490MM(D)X980MM(H) , *THE CHAIR MADE OF FULL FABRIC INBLACK COLOUR . IT WILL COMES INFINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32(±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* BASE : M.S POWDER COATED TUBLAR FRAME OF CATILEVER TYPE . THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. 48 SUPPLING OF OFFICE DESKDESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . 49 SUPPLING OF * FIX CANTILEVER ,* ALL OVER SIZE IS : 595MM(L)X 510MM(D)X875MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM .* BASE : 4 LEGS METAL POWDER COATED* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 50 * PROVIDING AND SUPPLYING PENTA WORKSTATIONLSHAPE SINGLE SEATER UNIT NON SHARING IN COMPLETELY KNOCK DOWN CONDITIONS WITH AN OVERALL SIZE 1500MM(L)X 600MM(D)X 1200MM(H) THAT IS TO BE ASSEMBLED AT SITE. THE WORKTOPSHALLHAVETHESIZE1490MM-1490MM (L) x 592(D) MADEUPOF25MMTHICKPRE- LAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST . OF IS LEVEL WITH APPROVED LAMINATE AND FINISH AS PER APPROVED SHADE. * THE PROFILE OF THE TOP SHALL BE IN RECTANGLE SHAPE AND THE EDGES SHALL BE SEALEDWITH 2MM THICK THIN STRIP OF IMPERMEABLEPVCTHAT IS CUT TO FIT THE SIZE OF BOARD PANEL AND DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THE TOP TRIM, TOP BAR, MID BAR, VERTICAL BAR, RACEWAY, SKIRTING SHALL BE MADE UP OF ALUMINIUM EXTRUSIONS (PRE-TREATED)AND DULY POWDER COATED WITH POLYESTER POWDER COATING 40P-60PTHICK . THE TRIMS SHALL HAVE THE SIZE 67MM X 19MM WITH 1.5MMTHICKCOVERED WITH DIE CAST END CAPS ON JOINTS 2 WAYS,3 WAYS& 4 WAYS(L-COVERFORCORNER,T-COVERFORMIDDLESECTIONWHEREVER REQUIRED).THEALUMINIUMRACEWAYSHALLBESITUATEDBELOWTHEWORKTOPWITHAN OVERALLSIZE149MM(H)X60MM(D)WITH1.4MMCOVERTHICKNESSAND2MMBACK THICKNESS AS PER REQUIREMENT OF INLAYING THE ELECTRICAL MANAGEMENT AND CARRYING THE WIRE HORIZONTALLY. *THE EXPOSED VERTICAL AND HORIZONTALFACES OF THE FRAMES SHALL BE SNAPFITTEDWITHTRIMS.THERESHALLBESOFT-BOARD(WITHFABRIC)ANDMARKERBOARD PROVIDED AT FRONT OF THE USER. LAMINATED TOP TILE AND BOTTOM TILE SHALL BE SITUATED AT BOTH SIDES OF THE USER AND BELOW THE WORK TOP RESPECTIVELY. THE PARTITION SHALL HAVE CONCEALED WIRE MANAGEMENT CAPABILITIES AND SHOULD BE ENGAGED FOR RESPONSIVE AND SAFE OPERATIONSOF POWER,TELECOMMUNICATIONSANDDATA(LAN)AND HASSEPARATE COMPONENTS FOR ELECTRICAL, DATA AND TELEPHONE CABLES HAVING ADEQUATE CAPABILITY OF BOTH THE VERTICAL AND HORIZONTAL WIRE MOVEMENTS.SLOTS/CUT-OUTS SHOULD BE GIVEN ON RACEWAYSTOFIXALLELECTRICALANDDATAPOINTS.SINGLESIDEDPVCWIRE MANAGER SHOULDBE ENCLOSEDATTABLETOP.ADJUSTABLE LEVELLERSHOE SHALL BE PROVIDED AT BOTTOM OF THE PARTITION TO AVOID SCRATCHESON THE FLOOR.PARTICLE BOARD OF GRADE II OFISLEVEL. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST .* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 51 PROVIDING & SUPPLYINGFIXING OF TWO SEATER SCHOOL DESK WITH SHELF/STORAGE UNDER DESK WHICH ONE MADE BY CAST IRON,DESK TOP MADE BY 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST,TWO SEATER CLASSROOM DESK CUM BENCH, TOTAL SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) DESK SIZE : 1050MM (W) X 400MM (D) X 760MM (H) BENCH SIZE : 1050MM (W) X 310MM (D) X 390 / 760MM (H) BACK SIZE : 1050MM (W) X 150 MM (H),TABLE TOP SHALL BE POLYPROPYLENE CO POLYMER (PPCP).BANDING UNDER STRUCTURE-BLACK 9005 ERW PIPE (AS PER IS:7138) : 25X25X1.2MM SQUARE MS PIPE, OF THICKNESS 1.2MM IN BLACK EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) AT BASE WITH PLASTIC CAPS MADE OF PP COPOLYMER (3530 GRADE) ARE ALSO PROVIDED ON THE REAR FRAMES ADDING MORE AESTHETIC VALUE TO THE PRODUCT. * ADDITIONAL HORIZONTAL SUPPORTS OF M.S. C SECTIONS OF 1.5MM THICK ARE PROVIDED BELOW THE DESK & SEAT.SHELF: 0.8MM THICK POWDER COATED M.S. SHEET BELOW THE DESK & HOOKS ON EITHER SIDE OF DESK IN M.S. ROD OF DIA 6MM.TOP,SEAT AND BACK PANEL: 18MM THICK PRE LAMINATED BOARD WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST.* 52 Suplying of Laboratory Steel Furniture Sidebench with rack and table top of specification,Size of side benches/Island benches (LxWxH):1800 mm X 1800 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 53 Supplying of Laboratory Steel Furniture Island bench with table top Size of side benches/Island benches (LxWxH):900 mm X 1500 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 54 Supplying ofPowder coated Round Classroom Stools Load of 50 Kg of stool of specification:Height Adjustment: Without Hydraulic,Frame and support made of CHROME PLATED MS TUBES,Chair Type:Non Revolving,Type of seating:Only seat,Pedestal base :Aluminium Die Cast 55 Suppling of Over Head Storage delite hi-tech of specification Material of Construction:ISI Marked, three layer Prelaminated particle Board conforming to Grade II Type III of IS 12823/2013 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back side,Number of Shelves (Nos):2 Number of Doors (Nos) -2 ,Height in mm (±10 mm)-750,Depth in mm (±5 mm)-450 56 Suppling ofStainless Steel Name Plates, Monograms, Labels, As per BHEL ,Specifications :Stainless Steel Name Plates, Monograms, Labels, 57 Suppling of Aquaguard RO & UV both SS304 Drinking Water Coolers With Built In Water Purifiction System AquaguardR 58 Suppling ofStainless Steel External Branding Signage Boards, Size 22X6 Feet,Signage Printing-Single size vinyl print ,Material -Stainless steel ,Coating: Gloss or matte,Fabrication Specs-framing with one coat of red oxide & 2 coats of oil paint to avoid rusting 59 PROVIDING & SUPPLYING DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2100MM(L)X 900MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH CLASSIC WENGE BROWN FINISH 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 50MM THICK* PROVISION OF SIDE RUNNER OF SIZE IS 1200MM(L)X 400MM(D)X 760MM(H) ,(CCOMBINATION ONSTRUCTION BELOW TABLE TOP 1 KEY BOARD TRAY IN PVC WITH TELESCOPIC CHANNEL ON RIGHT SIDE IS MOVABLESIDE RUNNERHAVING 1 OPENABLE DOOR WITH 1 FIXED SHELVE, 1 OPEN BOX WITH 1 FIXED SHELVE UPPER SHELVE HEIGHT IS @ 320MM BELOW SHELVE HEIGHT IS @324@ + 3 DRAWERS (2 EQUAL DRAWERS + 1 FILLING DRAWER)PER DRAWER HEIGHT IS @ 184MM, FILLING DRAWER HEIGHT IS @ 303MM HAVE CENTRAL LOCKAND HANDLES WITH CASTORS .* MOBILE PEDESTAL OF SIZE400MM(L)X 530MM(D)X 671MM(H) ,PER DRAWER HEIGHT IS @ 186MM, FILLING DRAWER HEIGHT IS @ 195MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 60 PROVIDING & SUPPLYING* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support* ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) ,* BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 61 PROVIDING & SUPPLYING OFFICE DESK STRUCTURE OF RECTANGULAR SHAPE .PRIMARY WORK SURFACE OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF 25MM THICK PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL MADE OF 18MM THICK, WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP.*CONSTRUCTION RIGHT SIDE OF TABLE TOP IS BASED ON A FIXED PEDESTAL3 DRAWERS & FROM LEFT SIDE OF TABLE TOP IS BASED ON 18MM THK ENGINEERED WOOD PVC EDGE BANDING PEDESTAL BACK,TOP,BOTTOM & DRAWERS ARE MADE OF 18MM THICK WITH 1 CPU TROLLY MADE IN BLACK METAL POWDER COATED.*FIXED PEDESTAL:L:410MM(L)X 580MM(D)X 750MM(H) ,IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823. 62 Suppling of Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood,Leg Material Solid Wood Finish Glossy Colour & Colour Family Brown - Walnut Dimension (W)680mm X (D)530mm X (H)450mm Table Top Thickness 8mm,Size Compact, 63 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 838MM(L)X 305MM(D)X 1676MM(H) STEEL BOOKCASE HAVING 4 DOORS AND K. TYPE OF LOCK: THREE WAYBOLTING DEVICE CONTROLLED BY LOCK, THICKNESS OF MS SHEET USED FOR SHUTTER: 0.7 MM, THICKNESS OF MS SHEET USED FOR SHELF: 0.7 MM, THICKNESS OF MS SHEET USED FOR TOP,BOTTOM, BACK AND SIDES: 0.7 MM, MATERIAL OF HANDLE: CAST BRASS, THICKNESS OF TRANSPARENT GLASS IN SHUTTERS: 4.0 MM, THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 60-80 MICRONIN COLOR GREY-LIGHT GREY. 64 Suppling of 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION DURIAN,THREE SEATERTYPE WAITING AREA CHAIR -NIXON/SS/3 MATERIAL : STAINLESS STEEL,SIZE 1820MM(L)X 690MM(D)X 790MM(H)COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 65 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE) 6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY. 66 PROVIDING & SUPPLYING * FIX CANTILEVER CHAIR PROVIDING & SUPPLYING* ALL OVER SIZE IS : 590MM(L)X 490MM(D)X940MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED.* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 35 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 590MM(L)X 490MM(D)X450MM(H) SEAT HEIGHT IS @ 450MM .* BASE : 2 CHROME LEGS + BACK SIDE BOTTOM CHROME IN METAL . 67 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM). 68 SUPPLYING AND PLACING30 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated ParticleBoards Of Grade-II Type-II Of IS:12823/Latest (for 14 seater rate devided by 30X24} 69 SUPPLYING AND PLACING PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OFSUPPLYING AND PLACING PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK .* PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 70 SUPPLYING AND PLACING* HIGH BACK 360° DEGRE REVOLVINGCHAIR * ALL OVER SIZE IS : 673MM(L)X 508MM(D)X1270MM(H) , *THE CHAIR MADE OF FULL NATURAL LEATHER IN BROWN COLOUR . IT WILL COMES IN MATTE FINSIH EXTRA PADDED DESIGNED FOR MORE CONFIRMT AT WORKPLACE IN CONTEMPORARY STYLE . DETAILS :* ARMS : WOODEN ARMS WITH LETHER PADDING ARM REST ARE FITTED TO THE SEAT & BACK.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : MULTI-LOCKING KNEE TILT MECHANISM .SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 500MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1270MM & MINIMUM HEIGHT IS 1219MM* GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHEDAND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . 71 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood Upholstery Material Leather,Seat Material Leather Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)1140mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 1 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 72 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood,Upholstery Material Leather,Seat Material Leather,Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)2130mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 3 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 73 SUPPLYING AND PLACING Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm,(DAISY/CT (W)1300mm X (D)650mm X (H)450mm),Specifications:Number of storage under top No storage,Top material,Tempered glass,Frame material No frames,Dimension of Top (Length X Breadth, or Diameter) ±20mm,762mmX457mm,Height of centre table ±10mm,410,millimeter,Thickness of top material (+/-2 mm)- 8 millimeterThickness of frame material (+/- 1 mm)-10 millimeter 74 SUPPLYING AND PLACING 14 SEATER oval MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II 75 SUPPLYING AND PLACING 6 Seater Sofa Material & Subtype-Premium Leatherette,Frame Material Solid Wood,Upholstery Material Premium Leatherette,Filling Material Foam,Silicone Fiber,Seat Material Premium Leatherette-Leg Material Solid Wood,Finish Matte,Colour & Colour Family Brown -Coffee Brown Dimension (W)4865mm X (D)960mm X (H)820mm,Seating -Capacity 3 Seater,seating Height 475mm,Size Standard 76 SUPPLYING AND PLACING9 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 4650 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 4650 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST,* CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATESt. 77 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM) 78 SUPPLYING AND PLACING Wooden Acoustic Wall Cladding/Panelling- Providing and fixing in position wood wall paneling of width 128mm, thickness of 16mm and length 2440 mm made up of high density fiber board with minimum density of 800 Kg/m3 substrate with a laminated facing/wood veneer as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 2mm groove & 14mm pitch. The panels shall have fire resistance of Class 1, BS 476 part 7. The edges of the panels shall be tongued-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick glass wool layer as directed by the Engineer-in-Charge. The panel shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install Gel stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall horizontalty using screws and plugs at spacing of 600mm centre-to-centre, Screw the aluminium channel (keel) vertically on channeled G.I stud 600mm 79 SUPPLYING AND PLACINGBlackout roller blind,Specifications-Mounting arrangement profile systems – clicked on hidden mounting clipsTypes of roller blind,Blackout roller blind-Shading solutionSingle roller blind – utilise one layer of fabric (called outer layer Operating mechanism-Side winders (that lock the manually adjustable blinds at different levels with the internal ratchet and tension adjusted by spring inside the tube) 80 Providing and Fixingof Drawers in Brown Finish ,Specification-Material : High QualityParticle board Dimensions (In Centimeters)-H 91 x W 90 x D 44 Dimensions (in Inches)-H 36 x W 35.5 x D 17.5 Primary Material-Engineered Wood as per Engineer incharge 81 Providing and FixingSTAGE - Providing & fixing raised stepped floor (Stage) Consisting ofMS Tabular frame work ofPipe Section (HOT ROLLED/COLD ROLLED) size 50mmx 50mmx2.0mm.tk. duly Painted with one coat of Red Oxide steel Primer, fabricated in module of 600 x 600 mm frame gid (as per Design or as instructed) with support of same section Legs /frame fixed on existing floor from base and raised at height minimum 150mm to max 200mm as required, from Existing floor. Vc providing and fixing 18mm thick heavy duty high density (1450 kg/cum) cement fiber Board fixed by SS. Screw on Horizontal & Vertical Surface on Existing Framework with one coated cement primer on Board and covering Board from top and sides by 2mm thick Vinyl flooring of approved make,colour and texture to be layed and fixed on sub floor smoothly finished and levelled by recommended adhesive cutting fixing and including covered raised portion of Board from all sides etc. complete,suitable for use up to the satisfaction of Engineer- in-charge.Design as approved by Engineer-In-charge. Base ofthe Vertical Legs of M.S. Frame (COLD ROLLED/HOT ROLLED) 82 Providing, fixing & installation MICROPHONE:-Flat frequency response across the vocal range for uncolored sound interchangeable cardioid, supercardioid, and omnidirec- tional cartridges that provide choices for applications Sleek, low-profile design for unobtrusive appearance Balanced transformerless output for increased immunity to noise over long cable runs-Compact Cinema Surround Speaker for Digital Applications:- Frequency range: 50 Hz to 20 kHz • High sensitivity: 91 dB SPL, IW @ 1m (3.3 ft) High power handling capability: 150 watts, continuous pink noise Internal Thermomaster• technology allows for unprecedented high frequency power in a compact, molded enclosure Convenient mounting design supports JBL QuickMountre, OmniMount• or APC multimount brackets Special cabinet shape incorporates 20• angled front baffle SMPTE/lS02969 Curve X high frequency de-emphasisMixer 8 input mono mixer XLR input switchable between mic and line level +/- 15dB gain trim control per input Input 1 is switchable to be pre/post master 24VDC or mains power operation Optional remote VCA/Tone generator/ Muting boards available • Whisper quiet operation 83 Supply, Installation, Testing and commissioning of microphone Delegate unit. 84 Supply, Installation, Testing and commissioning of microphone Chaiman unit, 85 Supply , Installation , testing and commissioning of Factory made 1.4HDMl Cable along with connector (15mtr length) 86 Supply , Installation , testing and commissioning of Factory made VGA along with Connectors.(15mtr length) 87 Supply , Installation , testing and commissioning of Factory made RCA along with Connectors.(15mtr length) 88 Supply , Installation , testing and commissioning 40W power Amplifier of following features:- Rated output wattage - 240W, amplifier output IOOV, 70V and 4-16 ohms transformer isolated speaker outputs, Supply input 0.775 v (OdB) unbalanced, 10k ohms, XLR and phone jack frequency 89 Supply , Installation , testing and commissioning10W wall mount speaker- Supplying, installation, testing and commissioning of 240W power amplifier with following features:- Rated output wattage- 240W, amplifier output 100V, 70V and 4-16 ohms transformer isolated speaker output, Supply input 0.775 v (0 db) unbalanced, 10k ohms, ZLR and phone jack frequency response 50 - 18000 Hz, +/- 1.5 dB, S/N ratio > 105 dB. 90 Supply , Installation , testing and commissioningCONFERENCE CONTROL UNIT, line Output 1 17.5V DC/3a Max.; -34dBV (20mV), line Output 2 17.5V DC/3a Max.; -34dBV (20mV), power Output 50w rMS at 2% THD, 90w Max. inputs 3xMic 0.65mV/4.7kQ Ixaux IOOmV/470kQ Frequency response 60-14,000Hz (± 3dB) 91 Supplying of Material & Subtype Engineered Wood Finish Matte,Colour & Colour Family Brown - Wenge Dimension (W)800mm X (D)384mm X (H)1970mm Size Standard,Style Contemporary,Assembly Type Knock Down 92 Supplying of Powder Coated Extruded Aluminium Sections Hybrid panel based system (combination of sliding & snap fit tiles) Modular Work Stations 93 Supplying of11 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823 94 SUPPLYING AND PLACINGSLOTED ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE)6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY, 95 SUPPLYING AND PLACING : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 96 Providing and fixing e Slimline Tower AC (2 Ton White),Availability of BIS/ISI Mark Certification for Split AC Floor type-Yes,Technology of air conditioner,Non Inverter AC-Nominal Marketing capacity as per BEE Star Rating Label (hint: 1 Ton = 3000 Kcal/Hr, Tolerance +/- 10%) (in Ton)-3 BEE Star rating of the product (Central Ministries/Departments while procuring shall ensure that the items carry 5 star (under normal conditions where annual usages is expected to be more than 1000 hrs),3 Star (where usage is Limited)or higher Star R NA- Star rating for the capacity of >10,465 Watts (>9,000 kcal/hour) 97 Providing & Fixing 2.0 mm thick homogenous single layered vinyl flooring. The flooring shall be laid in manner to provide comfortable and jerk free surfaces including material, adhesive, scaffloding and lead and lift at all floor level etc. complete as per direction and approval of Engineer-in-charge. 98 Providing & Fixing Wiring for Primary Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insuate copperconductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point With 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Switch with Front plate and metal Box with all Accessroies for users. 99 Providing & Fixing Wiring for Secondry Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with all Accessories. 100 Providing & Fixing Wiring for Primary Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 101 Providing & Fixing Wiring for Secondry Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 102 Wiring for Primary Power point 6/16 Amp Switch-Socket Outlet with 4 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq-mm FR PVC insulated copper conductor Wire. Providing and fixing 1 nos 6/16A Socket controlled by 1 nos 16A switch with front plate and metal box with allAccessories. 103 Providing & Fixing Standing Bathtubs Specifications:Size:1690x800x445/565mm Free Standing Bath Tub with Over Flow & Drain 104 Providing & Fixing Corazzin Garden Patio Seating Chair and Table Set Outdoor Balcony Garden Coffee Table Set Furniture with 1 Table and 4 Chairs Set (Black) 105 Providing & Fixing Reliable Drapes Cotton Plain Door Curtains Reliable Drapes,Cotton GSM Quality-220,Lining included-No, Pack of-1,Length (Ft)-8.5-9,Width (Ft)-3-3.5 106 Providing MattressDimension 1981 mm X 1829 mm,Thickness of Core Layer (Height of Spring) 200 mm,Thickness of Felt (±1 mm) for Bonnell Spring 12 mm,Thickness of Top Layer (±2 mm)-50 mm Thickness of Bottom Layer (±2 mm)50 mm,Type of Spring in Core Layer Bonnell Spring (with cotton felt),Material of Top Layer Visco Elastic PU Foam (Memory Foam) 107 ProvidingCotton Pillow 33 cm x 56 cm (COTTON PILLOW)of Specification-BIS Marking ( For Body Casing fabric )-No Logo Marking-No,type of Logo,Stitched ( Patch Logo ),Agree to provide 108 Providing240 centimeter x C1112M 135 centimeter (L x W) Printed Bed Sheets(BED SHEET ):Technical Specification of the Product-Sheeting, Tickings and Bedsheets (V2) as per IS 175 BIS Certifcation-No,VarietyVariety - 2,Process of colouring Dyed,Matching Pillow cover 109 Providing 25 liter 3 Star Water Heater,25 Ltr 5 Star Water HeaterCapacity litres (Litres),BEE Star Rating (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star or higher Star Rating of BEE)-3,Availability of Type Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification-No,Material of Inner Container Vitreous enamelled inner tank conforming to IS-13273 110 Providing Wall Mount Mesh Filter T-Shapped Kitchen-Chimney Material of Blower Body-Aluminium,Material of Blower Blade Aluminium,Material of Exhaust pipe-pvc,Filter Material,Stainless Steel,ShapeT-Shapped,Filter Type,Mesh Filter,Control Panel Type Soft Touch,Mount Type,Wall Mount 111 Providing Potable Water Purification System With Inbuilt Water Cooler. RO UV Aquaguard(Hot & Cold uv+ ro) Specifications-Flow rate (Litres/hr.)-12,Cold water storage capacity (Litres)-11 liter,Cooling capacity (litres/hr.)-4,Hot water storage capacity (Litres)-1.5 liter,Heating capacity (litres/hr.)-1.5,Cooling power consumption (Watts)-230,Heating power consumption (Watts)-550. 112 Providing300 L 3 Star Frost Free Double Door Refrigerator, of specification Cooling type:Frost free,Exterior body built:steel,Shelf material -Toughened glass,Voltage Range-160-300V,frequency-50 Hz 113 Providing900 mm wide 2000 mm high Metal Shelving Racks,Specifications :Type-OPEN TYPE Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted)-4,Shelves Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513,Depth in mm (±5 mm)-400,Width in mm (±5 mm)-900,Height in mm (±5 mm) 2000 114 Providing and fixing Drawers of Specification of Dimension (in cm)-H91 X W90 X D44in Brown Finish,primary material-Engineered wood,Weight 49.45kg 115 Providing and fixingDressing Table With cupboard and open shelves-Design of Dressing table With drawers,cupboard and open shelvesBase of dressing table Rectangular wooden frame Number of side mirror-1 number, Material specification-Prelaminated particle board of grade II type III of IS 12823/Latest.both side laminated. outer side laminated with shade matching with top shade and fascia shade and having balancing laminate of 0.5mm thick on other side Material thickness of complete body, Fascia and drawer/cupboard-19 millimeter,Material thickness for back, partition and drawer /cupboard bottom ± 2mm,19 millimeter 116 Providing and fixing Material & Subtype Solid Wood - Rubber Wood Table Top Material Solid Wood-Frame Material Solid Wood,Finish Glossy,Colour & Colour Family Brown - Walnut Dimension Of Table (W) 600mm X (D) 600 X (H) 610mm Dimension Of Chair (W)640mm X (D)530mm X (H)560mm Size Standard 117 Providing and fixing Wooden Double Bed Storage Box Opening From Material of Mattresses Panel-Other wood, Material of Bottom Panel of Storage Box-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Front, Back and side Panels Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Legrest-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest,Type of Bed-Wooden Double Bed Material of Bed Frame-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest 118 Providing and fixing 1 Seater Sofa With Leatherite Cover Sofa Set is Foldable to use as bed-No Backrest Cushion Material-Foam,density of Cushion of Backrest Material (Kg/Cubic M)-40 Covering Material for Seat and Backrest Fabric Frame Structure Material and size (±1 mm) Any other wood of minimum 25 mm thickness Seat Cushion MaterialFoam 119 Providing and fixing 8 SEATER Rectangular MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823/(Elanor Marble 8 Seater Dining Set) 120 Providing and fixing MODULAR TABLE L X D & H 2000 millimeter X 450 millimeter 700 millimeter (Alice TV Unit marble),Sprcification-Mode of Supply of modular table Knocked Down to be assembled at consignee site by the Seller Storage Provided one side,Number of storage unit-triple storage,Table Top material and thickness ±3mm-25mm thickness three layer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest Gable end and modesty panel material and thickness-18 mm thickness three layers pre-laminated Particle boards (Wood Product) of grade II Type III of IS 12823 Latest 121 Supplying of Library Management Department. and NDL Softwares,Server Machines, Air-Condition Systems,Xerox Machines,Lamination Machines, CONNECTION)Binding Machines,Furniture/Furnishing. Computers, Printers,Computer System(with Internet Connection) 122 Supplying of Printer of Specification A Printing Technology Laser-Cartridge Technology,Composite Cartridge,Type of Printing Mono,Paper Size-A4 Print Speed per minutes per Department Incharge 123 Supplying of XEROX Machine(standard company) Type of MachineMultifunction Machine,Print Technology-Laser Type of Printing-Mono,Cartridge Technology Separate Drum and Toner (Dual Component) Platen/Flatbed Size-A3/A4,Paper Size (Original/Image)A3/A3 RAM size (MB)-4096as per Department incharge 124 Supplying of Determination of wavelength of He-Ne Laser light using Grating(Specification- Output Power: up to 15mW, CW - Wavelength: 632.8nm,* Mode Structure: TEM00 (>95%)* Beam size: <= 1mm* Beam Divergence: <= 1.5 mrad* Polarisation: Unpolarised, Vertical Polarisation. complete set up as per Department incharge 125 Supplying of Brewsters Law using spectrometer(Brewsters angle apparatus differ goniometer digital research bench polarizer analyser with rail type bench abron). complete set up as per Department incharge 126 Supplying of Determination of wavelength of Sodium light using Michelson interferometer(Power-3 kW,Usage-Physics Lab,Material-Mild Steel,Power Source,Electric Voltage 240 V). complete set upas per Department incharge 127 Supplying of Determination of wavelength of Sodium light using FabryPerot interferometer complete set up of Specification Flatness of Reflective Mirrors-λ/20 Diameter of Reflective Mirrors-30 mm Reflectance of Mirrors-95% Effective Travel of Preset Micrometer~ 3 mm Min Division Value of Preset Micrometer-0.01 mm Travel of Fine Adjustment of Movable Mirror-1.25 mm Resolution of Fine Adjustment-0.0005 mm Low-Pressure Sodium Lamp-20 W as per Department incharge 128 Supplying of Resolving Power of Telescope complete set up (specification Color-BlackMaterial-Plastic as per Department incharge) 129 Supplying of Resolving Power of Prism(Resolving power of telescope assists the user to know the basic principle of telescope. Fabricated using excellent quality metals, glass and plastic material, it is widely used instrument in scientific lab of colleges and research centers. It is known for accurate calculation and longer service life) complete set up as per Department incharge 130 Supplying of Production and analysis of Polarised light using half and quarter wave plate(Usage/Application Laboratory Voltage-230 V,Color-Black,Material-SS). Complete set up as per Department incharge 131 Supplying ofLogarithmic Amplifier(Built in power supply : +15V & -15V DC,Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet,Weight : 2KGS APPX) complete set up as per Department incharge as per Department incharge 132 Supplying of Zener diode characteristics & voltage stabilizer. Complete-Specification:(Voltage-240 V Frequency-60 Hz,Display Type -Analog)in all respect as per Department incharge 133 Supplying of FET characteristics complete up(Technical specifications-Inbuilt variable, overload & short circuit protected DC regulated power supplies of 0- 5 volt & 0- 15 volt.Voltmeter & ammeter are mounted on the front panel.One FET.Highly insulated front panel .Trainer helps to demonstrate the working principle of FET.Set of required number of patch cords.Multi - colored sockets are used.Housed in an elegant powder coated metal cabinet.Strongly supported by a comprehensive instruction manual complete with theory and operating details.LED indication for supply “ON” to work on 220V AC Mains.) as per Department incharge 134 Supplying of MOSFET characteristics complete set up(Specificaion:Power-AC Mains,Usage/Application-Laboratory Type-Analog,Material-plastic,Power Supply-ac mains, as per Department incharge 135 Supplying of UJT characteristics complete set up(Specification-Usage/Application-laboratory,Type-Analog,Display Type-Analog meters,Power Supply-ac mains)as per Department incharge 136 Supplying of Transistor biasing (CE mode)(Specificaion-Operating Power Supply-220VAC On Board Power Supply 0-1VDC & 0-10VDC Experiment Input & Output Char In CB & CE Mode OF PNP Tr.Meter Type Analog / Digital)set up as per Department incharge 137 Supplying of Characteristics of SCR(SpecificationUsage/Application-laboratory Type-Analog Automation Grade-Manual ,Power Supply-ac mainscomplete set up as per Department incharge 138 Supplying of Basic Logicgates and Universal gates. Operating Supply Voltage 230V,Logic Family-DIGITAL,Number of Inputs per Gate-2,Usage Laboratory,Material-ELECTRONIC Complete set up in all respect as per Department incharge 139 Supplying of Op-amp Integrator &Differentiator. Complete set up in all respect :Product Specification:Type-Analog Material-Metal,Automation Grade=-Manual,Color-black with multicolour PVC front panel,Power Supply-230,Capacity--5,connector Type-patch cord sas per Department incharge 140 Supplying of Half Adder, Full Adder and 4-bit binary Adder. Complete set up in all respect (Product Specification:Type-Digital,Display Type-Digital Interface--NO Material-ABS,Display-Digital,Pulse Generator-50Hz Variable Dc Output-no)as per Department incharge 141 Supplying of G. M. Counter for 6 digits GM counter with built in power supply complete set up(G.M.COUNTER: COMPLETE WITH INBUILT POWER SUPPLY EHT 250-1200v Workable on 220v. 50Hz., Power consumption 8W approx. STOP, START, RESET switches. Counts Capacity : 6 DIGIT COUNTING SYSTEM, Preset time : 3 DIGIT PROGRAMABLE TIMER WITH DIGITAL DISPLAY. 3 ½ Inbuilt Digital Volt Meter for GM TUBE Voltage. G.M.TUBE: END WINDOW G.M.TUBE MOUNTED IN ACRYLIC STAND. WITH ‘LEAD’ AND ‘ALUMINIMUM’ ABSORBENTS, Radioactive Source: ONE RADIOACTIVE SOURCE BETA or GAMMA (in Lead Container and wooden Box) SOURCE, . Dimensions : 460X370X230mm.(Complete instrument is HOUSED in corrugate box with Export Packaging) Wight : Total weight of the Instrument is 5.5kg.) as per Department incharge 142 Supplying of Measurement of Dielectric constants of solid and liquid samples complete set up(It Consists of following partsRF Generator (9-10MHz Approx) Micro Ammeter (Range 0-50mA) Potentiometer for Sensitvity Selection Fixed Capacity (Metal) Variable Gang Capacitor Socket for test Capacitor & Variable Capacitor brought out at front panel One Solid bakelite plate to be insert in gap of test capacitors)as per Department incharge 143 Supplying of Study of Dielectric constants and Curie temperature of ferroelectric ceramics Complete in all respect(Specifications Temperature Range : Ambient to 200°C,Display : 31/2 digit, 7 segment LED with autopolarity & decimal indicationResolution : 0.1°C,Accuracy : ±0.5°C (typical),Stability : ±0.1°C Power : 150W,(ii) Digital Capacitance MeterThis a compact direct reading Instrument for the measurement of capacitance of the sample. Specifications,Range : 50-6000 pf,Resolution : 1pf Display : 3½ digit, 7 segment LED, Typical results obtained with the above set-up are as shown in the graph) as per Department incharge 144 Supplying of Determining Optical constants of a metal by reflection of light Complete in all respect (Specification-Power-AC Mains,Usage/Application-Laboratory,Type-Digital Material-Metal,Automation Grade Manual,Color-White Power Supply-AC Mains,Display Type-Digital) as per Department incharge 145 Supplying of Lattice dynamics kit with frequency meter (Technical Specifications: Audio Oscillator 100 khz,Built in Power Supply and Output Stage to match the Impedance of Simulated Lattice,Lattice DynamicKit consists of Transmission line, which Simulates One-Dimensional Mono-AtomicandDi-atomicLattices,. LCD Based Frequency Counter is Provided on panel to Measure Frequencycomplete set up as per Department incharge 146 Supplying of BCD to seven segments complete set up(Specification:Built in power supply : +5V DC Mains : 230V AC Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX) as per Department incharge 147 Supplying of Monostable Multivibrator using Oscilloscope (CRO) complete set up (Specification:Usage/Application Laboratory Packaging Type-Corrugated Box,Connector-2mm sockets Frequency Range -50Hz) as per Department incharge 148 Supplying of Bistable multivibrator using Oscilloscope(CRO))Technical Specification:(Built in power supply : +12V & -12V DC Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX)complete set up as per Department incharge 149 Supplying of Pulse code modulation and demodulation complete setup (Product Specification,Type Laboratory Trainer Kit Usage/Application-Laboratory,Accuracy-+/- 10%,Frequency-50 Hz Input Voltage-220V,Packaging Type-Corrugated Box,Power Source-ElectricShape-Rectangular,Material-ABS or Metal Cabinet)as per Department incharge 150 Supplying of Addition, Subtraction, Multiplication using 8086 microprocessor(Product Specification,Usage/Application-LaboratoryType-Fully Automatic,Automation Grade-Semi-AutomaticClock Frequency-Yes,Color-Green,Display-Digital Packaging Type-Corrugated Box, Power-200-400 Weight 2 Kg) as per Department incharge 151 Supplying of Thevenin theorem, (THEVENIN’S AND NORTON’S THEOREM APPARATUS,Technical specifications Inbuilt fixed DC regulated power supply of 12 volt. Voltmeter & ammeter are mounted on the front panel. Resistive network is used in the circuit. Circuit diagram is printed on highly insulated front panel . Trainer helps to demonstrate the working principle & verification of Thevenin’s & Norton’s Theorem based on resistive circuit. Student can calculate & measure the value of current & voltage for different load circuits. Calculation of power consumed by the circuit. Facility for connecting external Power Supply. Set of required number of patch cords. Multi - colored test points are provided in the circuit to observe voltages at different points. Housed in an elegant powder coated metal cabinet. Strongly supported by a comprehensive instruction manual complete with theory and operating details. LED indication for supply “ON” to work on 220V AC Mains. Circuit protection through glass fuse)Complete set up as per Department incharge as per Department incharge 152 Supplying of Active filter set up(Product Specification Operating Temperature-0-50,Frequency (Hz) 50,Condition-New Temperature (deg. Celsius)-50,Usage/Application Industrial, Educational, Residential, Commercial) as per Department incharge 153 Supplying of A to D counter type complete set up (Product Description-M-32 AD M-16 AD,Input AD: 1/4 TRS jack and 25 pin D-sub, servo balanced, completely symmetrical audio path, Output AD: 4 x ADAT optical, 1 x MADI optical/coaxial,Dynamic Range AD: 113 dB RMS unweighted, 116 dBA,THD AD: < -110 dB (< 0.00032 %),THD+N AD: < -104 dB (< 0.00063 %) Crosstalk AD: > 130 dB,Input level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu,Frequency response AD, -0.1 dB: 10 Hz - 23.2 kHz (sf 48 kHz),Frequency response AD, -0.5 dB: < 5 Hz - 45 kHz (sf 96 kHz) Frequency response AD, -1 dB: < 5 Hz - 80 kHz (sf 192 kHz) Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz, variable (Sync/WC),Jitter: Typical < 1 ns for internal, Word Clock, ADAT and MADI input Jitter sensitivity: all PLLs operate error-free even at 100 ns,Jitter suppression: > 30 dB (2.4 kHz),Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt Dimensions: (WxHxD) 483 x 88 x 200 mm)as per Department incharge 154 Supplying of Determination of Plancks constant(1. 1 0-2V D.C. at 20mA Variable Power Supply. 1.2 Digital Panel meter 3½ digits range 2mA. 1.3 Digital Panel meter 3½ digits range 2 volt 02 Lamp House: 100W Bulb with stand 03 Vacuum Type Photo Cell : Mounted in a Iron box. 04 Three different colour optical filters 05 Adequate no. of patch cords stackable 4mm spring loaded plug length 50cm. 06 Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.) as per Department incharge 155 Supplying of Determination of Energy Band Gap using Four Probe method(Product Specification:Type-Energy Band Gap Usage/Application-Laboratory,Connector-4mm Banana Socket Frequency-50Hz) as per Department incharge 156 Supplying of Determination of Hall coefficient and Hall angle in Hall-effect(Product Specification,Display Type-0-20V DC, 0-5 A, digit LED, Primary safety socket,4mm Electro Magnet Coils 500 T, Voltage resolution -0.1V,Current Resolution 0.1 A) as per Department incharge 157 Supplying of Determination of magnetic susceptibility using Guoys method(Usage/Application Physics Laboratory Type Of Instruments-Magnetic Susceptibility Gouys Balance Method Experiment Setup,Power-230V , 50Hz, +-10% Display Type-LED Type) as per Department incharge 158 Supplying of Study of absorption pattern of a given sample using FTIR spectrometer(Product Specification,Detector-High performance pyroelectric infrared detector,Weight-15 kg Software-1,Voltage-100-240V AC,Electronic System-24bit A/D converter at 500KHz, USB 2.0,Wavenumber Range-7800~350 cm-1Power-100-240V AC,50/60Hz,Signal Noise Ratio-30000:1 (resolution@4cm-1 , sample and background scan for 1 min@2100cm-1 ),Light source-Long life, steady state infrared emitter Beam splitter-coated KBr,Resolution-1 cm-1,Dimension-430mm x 360 x200) as per Department incharge 159 Supplying of LCD Projector and smart board (Product Specification,Projection Distance-<1 m Resolution-WXGA,Lamp Life-5000/9000/10000 HOURS Screen Size-100,Display Type-LCD,Dimensions-400X367X149MM Connectivity Type-Dual HDMI, HDMI,Brightness-2000-4000 Lumens Color-White) as per Department incharge 160 Supplying of Desktop(ntel Core I3/ 10th Gen/ 4GB RAM/ 1TB HDD/ DOS/ NO DVD/ 19.5 Inch Monitor/ 1 Year Warranty) as per Department incharge 161 Supplying of Printer(Product Specification,Printer Type-Ink Tank Color Output-Color,Print Speed-22 ppm,Paper Size-A4,Dimension-403 x 369 x 150 mm,Weight -6,Warranty-One Year or 50,000 pages which ever is earlier) as per Department incharge 162 Supplying of Printer (Product Specification Printer Type-Inkjet Color Output-Color | B&W,Print Speed-10,Paper Size-A4,Connectivity-USB,Dimension-377 x348 x179,Weight-3.9 Print Volume-any)as per Department incharge 163 Supplying of XEROX Machine (Product Specification,Functions-Photocopy,Supported Paper Size-A3,Supported OS-Windows 10 Color Output-Black & White,Number Of Trays-1,Item Color-Black & WhitePrint Speed-22 PPM,Weight-40 kg,Print Technology-Laser Input Tray Capacity-350 sheets,Warm-Up Time-5.6 Sec,Duty Cycle-80000 / Month,Resolution-600 x 600 dpi Connectivity-Ethernet & USB,Duplexing-Yes)as per Department incharge 164 Supplying of computer system with internet connection,PC Specifications to be followed :Processor Intel Core i5(10th Gereneration or newer ),RAM-8 GB or Higher HDD:512 GB,SSD,Monitor 24 LCD Monitor .OS:Windows 10 Professional ,Anti virus:User Licence for one year as per Department incharge 165 Supplying of Laptop (with Internet connection),Processor intel Core i5(11th Generation or newer),RAM 8 GB or higher HDD:512 GB,SSD Monitor 14 screen ,OS Windows 10 Professional ,Antivirus :User Licence for one year 166 Supplying of LCD Projector (Specification-Brightness:2000-4000 Lumens,Resolution-FULL HD 1080P,Connectivity Type-Dual HDMI, HDMI Display Type-DLP,Power Supply-100-240V Portable-Yes) as per Department incharge 167 Supplying of Smart Board (Frame Material-Aluminium Usage/Application-School, Education, etc,Effective Touch Area-72 x 48 inch Material-Ceramic Input Method-USB Power Consumption-150 - 220 W,Shape-Rectangular) as per Department incharge 168 Supplying of MS Suite Software(Specification-Microsoft Office Software,Operating System:For Windows,Brand:Microsoft )as per Department incharge 169 Supplying of Adobe Photoshop Software(Specification -Graphic Design and Photo editing,Licence-1 yea) as per Department incharge 170 Supplying of windows10 OS Software(Specification-License Duration-Life Time,Architecture-32/64 Bits,Operating System For WindowsAlso Provides,Windows Operating System,Provide Installation Service-Yes Support 24/7 (Live Rep)) as per Department incharge 171 Supplying of Laptop of 11th Generation intel core i3,1115G4 processor (6 MB Cache up to 4.1GHZ)windows 10 Home Single language English,intel UHD Graphics with shared graphics memory 8GB ,8 GBX1,DDR4,3200 MHZ,512 MB,2 PCLeNVMe Solid state drive pebble (Top colour is pebble colour,Base and palmrest are black colour as per department incharge 172 Supplying of Desktop of 10th Generation intel core i5-10500T (6 CORE,12MB Cache 2.3GHZ to 3.8GHz,35W ),Windows 10 Pro (64 Bit )English,intel integrated graphics),8GB ,1X8 GB,DDR4 non-EC0C Memory,2.5 inch TB 7200 RPM ,SATA Hatd disk drive 5480AJO 23.8 FHD 1920X10080 ips non touch,Antiglare camera,integrated graphics,Bronze 1505w PSU as per department incharge 173 Supplying of Printer (Specification:Item Weight-12 Kg,Package Dimensions-60 x 56.5 x 38 cm,Connectivity Type-Wi-Fi Operating System-Windows)as per department incharge 174 Supplying of Fumehood(Specification:Type-exhaust,LED-Tube fitting,Power-230 volt,Working Top-Granite ,MOC-GI with PU coated Storage includedas per department incharge 175 Supplying of electronic balance(Specification -Usage/Application-Laboratory,Accuracy-0.01%,Calibration-Fully Automatic,Type Of Weighing Scale-Digital,Voltage-110-220 V Mounting Type Desktop) as per department incharge 176 Supplying of Magnetic stirrer Magnetic stirrer Hot plate (Specification-Weight-2.3 kg,Timer -999 minutes,Temp. Accuracy-+-1 Deg.C(<100 Deg.C)+-3 Deg.C(<300 Deg.C),Dimensions LxWxH (mm)-230 x 180 x 120,Max.Temp. (Plate Surface) 300 Deg.C,Power supply-AC 220V / 50 Hz,Top Plate Size 135 x 135 mm,Display-LCD,Max. Volume (ml) 2000 ml,Speed (RPM)-1250 RPM Plate Material Steel per department incharge 177 Supplying of HOT Air oven of made inner material-stainless steel,Outer material -mild steel ,Surface treatement -Powered coated ,Sizes-Different sizes,Gravity conviction type-Double wall.Mechnical conviction -Triple wall as per department incharge 178 Supplying of colourimetry , Ery colour colorimeter industrial and research purpose stability( Product Specification:Material-Aluminium Alloy,Automation Type Automatic,Brand -DD-LAB ,Dimension-210 x 160 x 80 mm,Display Type-Dual Digital DisplayLight Source-Highly Accurate Laser Source,Stability- + 0.02 O.D. Per Hour Volume 1 ml. minimum,Filters layer-Built in 9 Digital filters 30,000 hours Life,Weight-1.5 Kg,Battery Backup-6 V Ni CD Re-chargeable Battery,Detector Silicon Photo-diode,Display Model Absorbance & Wavelength,Filter Wavelength 680 NM Country of Origin Made in India) as per department incharge 179 Supplying UV-Vis Spectrophotometer Fully touch screen portable UV Spectrophotometer shimadzu model name:UV 1900,Brand :shimadzu,Display =fully touch screen,Type-portable,size 450x501x244 as per department incharge 180 Supplying of potentiometer ,Range-0 to 1999.9mv,Resolution-1 mv,Repeatability -1mV,Accuracy +1 mv+ digit,Input impedency-10ohms,operating temperature 10 to 50 degree Celsius,Display 1/2 digit 0.5 seven segment LED Display indication,Power-230V+10,50hZ,Dimensions 76x275x170 mm,weihjt 2 kh as per department incharge 181 Supplying of Conductivity meter,LT 26 Deluxe conductivity meter,Product details:Model no-LT-26,Brand -Labtronics,Usage-Laborataty,Display type 3.5 Digit LEDas per department incharge 182 Supplying of Online COD/BOD Detector analyzer warer quality monitoring probe,Measure range-0-200/0-1000mg/l,Resolution -1 mg/l ,Accuracy +5%F.s ,Under pressure-1 bar,Power supply -12-24V DC ,Temperature range 0-45 degree ,Production leve;-IP68 as per department incharge 183 Supplying of melting point appratus,Temperature renge -2 degree above ,Readability 1 degree ,Display -3 Digit LED,Heating rate control-Electronic,Temperatre sensor PT-100as per department incharge 184 Supplying of Ph meter Labrtonics,Range:0-14pH,Resolution:0.01pH,Accuracy:0.01pH(Relative),Temp comp:Automatic wvith temp probe,Buffer:Manuals with keys as per department incharge 185 Supplying of Spectrum 3 FT-IR Spectrometer,Model no.-LI280127,Wave length -11000-30 cm-1 as per department incharge 186 Supplying of Stopwatch NIVIA 600 plastic(Product Specification:Color-Black,Usage/Application-Sports,Time Display 12/24 hour display for user option,Material-Plastic,Dial Shape-OvalMaximum Counting-23 hours 59 minutes 59 secondsas per department incharge 187 Supplying of Digital Bomb Calometer(Specification-Auto Off Automatic,Frequency-50 Hz,Voltage-230-280 V,Operating Time Per Test 10 minutes,Power Source Electric(Automatic) as per department incharge 188 Supplying of Microprocessor viscometer ,Product details: Measuring range-101x105mpa,,Spindles-4 Spildles,Rotor speed(rpm)-6/12/30/60 rotor speed rpm as per department incharge 189 Supplying of Flame photometer,Product details:Application-Laboratory use,industialuse,,weight 705kg ,Curve fit accuracy,Resolution-0.1ppm/meq as per department incharge 190 Supplying ofwater purification system,Resolution-18.2 M ohm cm at 25 degree C,Weight-19.5kg,Frequency-50-60Hz as per department incharge 191 Supplying of Refrigerator of 7.5kg fully Automatic Top Load washing machine (Hard water wash,Grey,5 star,10 years warranty as per department incharge 192 Supplying of water bath ,unstirred water bath s ,Digital info Water bathdigital,18L amb+5 tp 99 degree C includes clear lid and base trayas per department incharge 193 Supplying ofmini rotary shakers 50to 400RPM,features-220/230 V ac,Power supply-50-60Hzas per department incharge 194 Supplying of Magnetic stirrer- capacity 5 litre Spinit Digital Magnetic Stirrer Features-Type of Product-Magnetic stirreras per department incharge 195 Supplying of Digital ultrasonic cleaners (Specification: tank capacity 4 L, ultrasonic power 100W, Heating, Power-100W, time setting 1-99 min, heating temp up to 80 degree, in and out both in ss, with digital timer auto stop of sonication. 230V AC +-10% 50HZ. Tank size 300x150x100mm, overall size 330x180x240mm.supplied with basket and Lid.) as per department incharge 196 Supplying of Calomel electrode (Product Specification:Packaging Type-Box.,Length-120 mmUsage-Electrochemical Study(Laboratory))as per department incharge 197 Supplying of Pt-wire counter electrode (Product Specification Electrode Diameter-0.5 mm,Power Source-10A) as per department incharge 198 Supplying of UV-LAMP Cabinet(Product SpecificationSize/Dimension-15 X 12 X 10 (H) Light Source-3 NOS , SHORT WAVE -254nm-1no, LONG WAVE-365nm, VISIBLE LIGHT,Material-MILD STEEL,Voltage 230 V AC) as per department incharge 199 Supplying of Magnet (Magnet Grade-N48 Shape-Cup & Pot,Material Neodymium,Dimensional Tolerance+-0.05 mm,Plating / Coating-Ni-Cu-Ni Colour-red,Surface Gauss 3000 Gauss,Maximum Working Temperature (Deg. C)-230 Deg. C as per department incharge 200 Supplying of Micro Centrifuge tube(Specification: Usage/ApplicationLaboratory Analyzers,Material,Polypropylene Color-White,Pack Contains--20 Packet / carton & 500 pcs / packet,Shape-Conical,Length-4.1 cm,Inlet Diameter-1.3 cm Capacity2 ml)as per department incharge 201 Supplying of Micropiprtte(10-100uL),(Product Specification Capacity-10 ml,Volume Increment -0.1 microlitre Material-Glass,Autoclavable-Yes)as per department incharge 202 Supplying of Micropiprtte(10-1000uL),( Product Specification Material-Plastic,Capacity-Up to 1000ul,Color-Transparent Usage/application-Chemical Laboratory) as per department incharge 203 Supplying of printer-Black and white print ,scan,copy all in one printer Product Specification Print Speed-Up to 18ppm / 19ppmLaser Printer,Color Output-Black & White,Print Technology LaserjetUsage/Application-Printing,Supported Paper Size-A4 Compatible Operating Systems1,Windows 8,Windows 7,Windows Vista,Windows XP,Windows 2000,Mac OS X 10.4 - 10.8,Linux*3 Print Resolution-Up to 600 x 600DPI,1 200 (Equivalent) x 600DPI,Print Language-UFR II LT Dimension-372 x 371 x 254mm (With the Cassette Opened)Weight(W/O CRG)-7.6kg,Monthly Duty Cycle-8000 Pages Power Consumption 960W(Maximum),First Printout Time7.8s / 7.7s (A4 / LTR),Zoom 50 - 200% in 10% Increments Refill Type Toner Cartridge,Internal Memory 64 MB Printer Language UFR II LT (Host Based),Paper Weight 60 to 163g/m2 (Cassette),Copy Speed Up to 18 / 19Cpm (A4 / LTR) Halftones 256 levels,Copy Resolution 600 x 400 DPI Display 7 - Segment,1 - Digit LED as per department incharge 204 Supplying of printer-colour print ,scan,copy all in one printer (Specification :Functions-Print | Scan | Copy,Technology-Inkjet Color output-Color | B&W,Connectivity-Wireless(Wi-Fi) Usage-For Office ,Paper size-A4,Print speed upto 40 pages/min)as per department incharge 205 Supplying of photocopier branded fast print 50ppm high image resolution superior print quality,fast scan up to 50ppm A4 Monocolouras per department incharge 206 Supplying of LAN.Networking,cabling,switches,Wi-Fi points(10 points in each department) as per department incharge 207 Supplying of installation of Printer (Black and white),Printer( colour),Photocopier and LAN,Networking,Cabling,Switches,Wifi Points as per department incharge 208 Supplying of RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio as per department incharge 209 Supplying of Freightof RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio) as per department incharge 210 Supplying of wall mount (Dimension long:Telescopic Adjustable CCTV camera mounting bracket -Color: Beige Universal Camera Bracket, Heavyduty weatherproof iron bracket fits mostbrands of outdoor camera housing,Iron stand Platsic APPLICATION: Ideal for indoor outdoor dome cameras, Security Camera Mount Bracket, high quality with professional design,more stable and reliable.Hidden hole: Cable can feed thru L bracket tothe housing thus provide cable protection Outdoor and Indoor Use.)as per department incharge 211 Supplying of Camcorder Compact full HD ENG Camera with 20X zoom and 5 axis image stabilization. 20X optical zoom (26.8mm, F/1.8-576MM, F/2.;28.8MM, f/1.-576mm). 5 axis image stabilization. Support formats: full HD50P/60P, AVCHD/MP4;SD card slots 2 35mm film camera equivalent when dynamic IS is turned on with Tripod as per Department Incharge 212 Supplying of Video capture and video capture card (Product Specification:Converter type-USB,Material:Metal,Audio Jack:3.5 mm,HDMI Version:Hdmi-1.4,Audio:44100 AU,Video:Full HD Frame:48000 Resolutions)as per department incharge 213 Supplying of UPS(1KVa)(Product Specification: Type-Online UPS,Capacity-1 kVA,Configuration-1 Phase IN - 1 Phase OUT,Protection-OverVoltage,Form Factor-Tower Model Back Up Time-20- 30 Mins,Frequency-40 ~ 70 Hz (auto-sense) Usage/Application All) as per department incharge 214 Supplying of Studio light-125watt,5 LED BULBS consisting of 25watt bulb(Colour Temperature:5500 kelvin)as per department incharge 215 Supplying of Live streaming software for live streaming or live telecast as per department incharge 216 Supplying of Cables,installation,SSD Card(SAMSUNG VNAND SSD 850 EVO 2.5 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-75E250B/AM) as per department incharge 217 Supplying of complete making soundproof class(20*20 feet Room) as per department incharge 218 Supplying of RFID Tags RFID Book Lables(specification: Language ‏ : ‎ English,Simultaneous device usage ‏ : ‎ Unlimited Text-to-Speech ‏ : ‎ Enabled,Screen Reader ‏ : ‎ Supported Enhanced typesetting ‏ : ‎ Enabled,X-Ray ‏ : ‎ Not Enabled,Word Wise ‏ : ‎ Not Enabled) as per department incharge 219 Supplying of Anti theft stickers with the university logo(Polycarbonate 175 Microns Matt Finish) as per department incharge 220 Supplying of Middleware Application Desktop(writing and read tags) as per department incharge 221 Supplying of RFID Staff station or desktop reader (used for Tagging of books and circulation) operations through RFID as per department incharge 222 Supplying of Integration with software and Training of complete RFID System as per department incharge 223 Supplying of Data Encoding,Booking Tagging and Registration per book as per department incharge 224 Supplying of RFID Secuity Gates (2 pedestals - 1 gate),RFID Secuity Gate(Provide Installation Service-Yes,Support-24/7 (Live Reporting Language Support-English) as per department incharge 225 Supplying of Automated book drop box (ntegrated RFID Reader • Approx. 250 Books Receiving Cart (Movable) • Client Software for Checking-in Facility and communicating with LMS with provision for E-mail/SMS confirmation • Has automatic hutch which should open only on valid RFID tags and close once the book has been accepted to prevent the patrons from removing checked in books. • Communication with any LMS Software through SIP2/NCIP protocols • Compliant with internationally recognized standards for RFID based library self-services systems. • Book Drop can display item ID once item is returned. • Enabled with necessary items i.e.: Branded CPU etc. • 15” or higher LCD/LED Touch Screen Monitor. • Ethernet High Speed Receipt Printer (Reputed/Branded) • Customizable Design matching the library aesthetics; Contemporary and attractive. • Design is such that there is not damage to the dropped books. • Library Ethernet network and wireless network compliant. • Optional Features: Fingerprint Scanner, Smart Card Readers etc) as per department incharge 226 Supplying of 5KVA Invertor -online UPS with battery back up 100Mah battery (8 units)(Product Specification,Capacity-1100 Voltage-130V ,Rated Input Power-5 KVA,Display-Digital Type-Square Wave Inverter Country of Origin) as per department incharge 227 Supplying of LAN,Switches,Necessary cabling,casing,power supply port including cables as per department incharge 228 Supplying of Installation charges of RFID Tags,Anti-theft sticker,Middleware Application Desktop,RFID Staff statio,Integration of software,Data incoding books,RFID Secuirty Gates,Automated Book Drop Box,Cabling,Casing,Wiring,Switches,LAN as per department incharge 229 Supplying of Air conditioning 1.8Ton heavy duty AC (minimum 3 star rating,Coil material -copper,Power consumption-1950W,Power Requirement -AC 130-285V, 50Hz) as per department incharge 230 Supplying of Desktop,i5 processor ,7th Generation,500GB HDD,4GB RAM,23.8 INCH LED Backlit Monitor,Full HD IPS Panel(Brand-HP,Dell,Acer) as per department incharge 231 Supplying of Headphone with built in microphone,(Communication-Wired) as per department incharge 232 Supplying of 75 diagonal length with 3 GB RAM and 48 GB ROM ,Slim frame anti glare glass.3M Antiglare ,H7 Touch surface hardness,Light weight for easy installation as per department incharge 233 Supplying of Dedicated server-HPE Proliant DL 380,Gen 10 5218.2.3GHz 16core ,1P-32GB-R P408ianNC 8SFF 800WPS Server,Intel xeon G5218 Kit for DL 380,Gen 10 as per department incharge 234 Supplying of 5.5KVA Inverter with battery backup,Microtek inverter,online UPS ,65Mah battery(16 unit )-Exide as per department incharge 235 Supplying of Freight Transportation Charges of Desktop,Headphone,LAN Switches,4K-OPS,Dedicated server,5.5 KVA Inverter with battery back up and Air conditioner as per department incharge 236 Supplying of 86 Diagonal interactive display,3 GB RAM,48 GB ROM,4K Display Android model,Slim framenAnti glare Glass,H7 Touch Surface hardness ,Light weight for easy installation ,Media Suits for Annotation softwatr bundled with education Apps as per department incharge 237 Supplying of 4k OPS i5,7th Gen,8GB RAM,128 GB SSD as per department incharge 238 Supplying of play mounting including white board & Green board,Material post formed ply,Size 15ft(length)x7ft(ht) with green board for chalk,whiteboard for marker and cupboard as per department incharge 239 Supplying of UPS (1KVa,Phase-Single phase.Back up Time 10-20 min,Frequency-50Hz) as per department incharge 240 Supplying ofTraining and installation of 86 diagonal interactive display,4k-OPS,Play mounting including white board & Green board and UPS of 1KVA as per department incharge 241 Supplying of Digital Podium PTGN 500 Windows 8.1 LCD ,Electronic Lectern,On site OEM Warranty in 3 yearsas per department incharge 242 Supplying of PA System sound system with amplifier 350 watt ,30 watt speaker (4 nos) as per department incharge 243 Supplying of wireless mic Dual channel cordless microphone as per department incharge 244 Supplying ofTraining and installation of Digital Podium,86 Diagonal interactive display (4k display),4K-OPS,Play mounting including white board and green board,5KVA invertor,PA System and wireless mic as per department incharge 245 Supplying of Desktop :- 1).i5 Processor, 7th Generation, 500GB HDD, 4GB RAM, 2).23.8 inch. LED backlit Monitor Full HD IPS Panelas per Department Incharge 246 Supplying of 55 LED Display for CCTV Branded LED Display as per department incharge 247 Supplying of CCTV Camera IP based CCTV camera,2 TB Space with NVR with necessary accessories as per department incharge 248 Supplying of Stagmometer as per Department Incharge 249 Supplying ofViscometer as per Department Incharge 250 Supplying of Beaker-50ml as per Department Incharge 251 Supplying of Beaker-100ml as per Department Incharge 252 Supplying of Beaker-250ml as per Department Incharge 253 Supplying of Beaker-500ml as per Department Incharge 254 Supplying of Beaker-1000ml as per Department Incharge 255 Supplying of Buchner Funnel 3 as per Department Incharge 256 Supplying of Buchner Funnel 6as per Department Incharge 257 Supplying of Burette-50ml as per Department Incharge 258 Supplying of Chromatography column 1x18 with stop cock as per Department Incharge 259 Supplying of Conical flask-100ml as per Department Incharge 260 Supplying of Conical flask-250ml as per Department Incharge 261 Supplying of Conical flask-500ml as per Department Incharge 262 Supplying of Conical flask-1000ml as per Department Incharge 263 Supplying of Flat Bottomflask-500ml(Round) B-24 socket as per Department Incharge 264 Supplying of Round bottom flask-50ml Joint B-24 as per Department Incharge 265 Supplying of Round bottom flask-100ml Joint B-24 as per Department Incharge 266 Supplying of 3 neck RB flask B-29,B-19.as per Department Incharge 267 Supplying of Condenser Spiral B-24 and, B-19 as per Department Incharge 268 Supplying of Condenser Spiral B-24 and, B-24 as per Department Incharge 269 Supplying of T-type tube as per Department Incharge 270 Supplying of Rubber Cock No. 10 as per Department Incharge 271 Supplying of Specific Gravity hydrometer 800-1000 as per Department Incharge 272 Supplying of Specific Gravity hydrometer 100-1200 as per Department Incharge 273 Supplying of Universal hydrometer 1000-2000 as per Department Incharge 274 Supplying of Measuring Cylinder-10ml as per Department Incharge 275 Supplying of Measuring Cylinder-50ml as per Department Incharge 276 Supplying of Measuring Cylinder-100ml as per Department Incharge 277 Supplying of Measuring Cylinder-500ml as per Department Incharge 278 Supplying of Measuring Cylinder-1000ml as per Department Incharge 279 Supplying of Measuring Cylinder-2000ml as per Department Incharge 280 Supplying of Measuring flask-100ml as per Department Incharge 281 Supplying of Measuring flask-500ml as per Department Incharge 282 Supplying of Measuring flask-1000ml as per Department Incharge 283 Supplying of Pipette-0.5ml as per Department Incharge 284 Supplying of Pipette-2ml as per Department Incharge 285 Supplying of Pipette-5ml as per Department Incharge 286 Supplying of Pipette-10ml as per Department Incharge 287 Supplying of Pipette-25ml as per Department Incharge 288 Supplying of Separating Funnel-250ml B-24/B-24 as per Department Incharge 289 Supplying of Spatula Flat Spoon 6as per Department Incharge 290 Supplying of Spatula Flat Spoon 5as per Department Incharge 291 Supplying of Stop Cork 2wayas per Department Incharge 292 Supplying of Silica crucible-15ml without Lid as per Department Incharge 293 Supplying of Silica crucible-25ml without Lid as per Department Incharge 294 Supplying of Stalagmometer Straight Graduated as per Department Incharge 295 Supplying of Chemical thermometer 10c-110c as per Department Incharge 296 Supplying of Chemical thermometer 0c-250c as per Department Incharge 297 Supplying of Tiration flask-100ml as per Department Incharge 298 Supplying of Tiration flask-250ml as per Department Incharge 299 Supplying of Tongs crucible S.S.8 as per Department Incharge 300 Supplying of Test tube holder as per Department Incharge 301 Supplying of Filter Flask-500ml as per Department Incharge 302 Supplying of Filter Flask-1000ml as per Department Incharge 303 Supplying of Watch glass 3 as per Department Incharge 304 Supplying of Watch glass 4 as per Department Incharge 305 Supplying of Watch glass 6 as per Department Incharge 306 Supplying of Wire gauge150x150mm as per Department Incharge 307 Supplying of Tripod stand 8 as per Department Incharge 308 Supplying of boiling Test tube 1x8as per Department Incharge 309 Supplying of boiling Test tube 2x8as per Department Incharge 310 Supplying of Reagent Stickers 2x1 as per Department Incharge 311 Supplying of Ordinary Filter paper as per Department Incharge 312 Supplying of Reagent bottles-250mlas per Department Incharge 313 Supplying of Rubber cork as per Department Incharge 314 Supplying of Rubber tube 6mm as per Department Incharge 315 Supplying of Solid Reagent bottle-125mlas per Department Incharge 316 Supplying of Stopwatch plastic body as per Department Incharge 317 Supplying of Test tube stand 12 holes as per Department Incharge 318 Supplying of Thermometer 360 as per Department Incharge 319 Supplying of Test Tube 6mmx15cmas per Department Incharge 320 Supplying of Test Tube 10mmx10cm as per Department Incharge 321 Supplying of China dish 3 as per Department Incharge 322 Supplying of China dish 4 as per Department Incharge 323 Supplying of Brushes for Test Tube as per Department Incharge 324 Supplying of Brushes for Burette as per Department Incharge 325 Supplying of Brushes for Conical flask as per Department Incharge 326 Supplying of LPG gas burner as per Department Incharge 327 Supplying of Condenser Coil 12 as per Department Incharge 328 Supplying of Receiving adopter with vacuum outlet as per Department Incharge 329 Supplying of Plastic Wash bottle-500mlas per Department Incharge 330 Supplying of Pastel and Mortar 3 as per Department Incharge 331 Supplying of Pastel and Mortar 4 as per Department Incharge 332 Supplying of Pastel and Mortar 6 as per Department Incharge 333 Supplying of China Clay 2 as per Department Incharge 334 Supplying of China Clay 3 as per Department Incharge 335 Supplying of China Clay 4 as per Department Incharge 336 Supplying of Petri Dish 3(Borosil) as per Department Incharge 337 Supplying of Petri Dish 4(Borosil) as per Department Incharge 338 Supplying of Distillation Set-Complete flask-500ml as per Department Incharge 339 Supplying of Distillation Set-Complete flask-1000ml as per Department Incharge 340 Supplying of Thermometer Pocket B-14 as per Department Incharge 341 Supplying of Sintered Glass Funnel-25ml as per Department Incharge 342 Supplying of Air Condenser 12 as per Department Incharge 343 Supplying of Burette Stand with Clamp as per Department Incharge 344 Supplying of Cork borer as per Department Incharge 345 Supplying of Capillary Tube for melting point as per Department Incharge 346 Supplying of Dessicators 6 as per Department Incharge 347 Supplying of Dessicators 8 as per Department Incharge 348 Supplying of Dropper with Rubber teats 6 as per Department Incharge 349 Supplying of Dropper 4(Borosilicate glass) as per Department Incharge 350 Supplying of Dropping bottle-125ml as per Department Incharge 351 Supplying of Funnel Stand as per Department Incharge 352 Supplying of Fusion Tubeas per Department Incharge 353 Supplying of Glass Rod as per Department Incharge 354 Supplying of Glass Tube as per Department Incharge 355 Supplying of Stopwatch Steel body as per Department Incharge 356 Supplying of Magnetic Stirrer as per Department Incharge 357 Supplying of Rubber Gloves as per Department Incharge 358 Supplying of Reagent as per Department Incharge 359 Supplying of Sandbath as per Department Incharge 360 Supplying of Tissue Paper(Local made) as per Department Incharge 361 Supplying of Double Beam PC Microprocessor UV-VIS Spectrophotomet erMake:Systroni cs Model: 2202 PC Based Double Beam Automatic source optimization ,Base line calibration & Cell optimization 200 - 1100 nm Range2. 0 nm Bandwidth%T. Abs. Conc . (K factor. Multi standard ). Multi component measuring modesSingle Wave length, Multi Wave length Scan (with multi scan facility). Time Scan. Kinetic scan operating modes Automatic 5 position sample changer Single Position 50 /100 mm Cuvette Holder (Optional) as per Department incharge 362 Supplying of Refrigerated Centrifuge,(Specification:Speed:- 20000 Max.,RCF:- 37570 Max.,Lowest Temp:- -8,Noise:- <-60db)as per Department incharge 363 Supplying of Refrigerated Centrifuge Essential accessories Required:. With angle Heads (with polypropylene tubes)Model- R-248M 24xl.5 ml as per Department incharge 364 Supplying of Refrigerated Centrifuge 2. Voltage stabilizer:- 03 KW Servo controlled Voltage Stabilizer, input 170 volts to 260 volts, output 220 volts to 240volts as per Department incharge 365 Supplying of PCR machine(Specification- Well block, Gradient, temp. range 4° - 99-irC, memory capacity 10000 protocols , display 7inch,volume capacity I 0- 100 μL , preloaded protocol, temperature accuracy ±0.2°C@99°C, with PCR wizard as per Department incharge 366 Supplying of SOS PAGE unit and Western Blot apparatus along with power bank -Mini-TBC electroph_oretic transfer cell, includes: Mini 01P-4 cell tank and lid with cables, buffer, Mini transfer module, gel holder cassettes, 4 fiber pads, cooling units, instructions, Western blot unit, compatible power bank as per Department incharge 367 Supplying of pH Meter With electrode(Type of PH Mater - Portable,Ph Range:0-14,Resolution-0.01pH,compensation-0 to 80 degree celsius) as per Department incharge 368 Supplying of Deep fridge(It is used to store chemicals and preserve samples at very low sub-zero temperatures or below)as per Department incharge 369 Supplying of Autoclave (Vertical)Size- 400 x 600mm ,;Capacity- 75Ltr as per Department incharge 370 Supplying of Hot air oven (Sterilization) as per Department incharge 371 Supplying of Incubator Shaker-Growth and enumeration of microbes (Broth cultures) as per Department incharge 372 Supplying of Horizontal Laminar air flow(Sterile environment Size 4X2)as per Department incharge 373 Supplying of Horizontal Agarose gel electrophoresis unit with gel caster and Power pack Separation of macromoleculeas per Department incharge 374 Supplying of Vortex mixture-To mix content of test tubes and microfuge tubes. as per Department incharge 375 Supplying of Ultrapure Water Purification System:MiliQ Water For distill wateras per Department incharge 376 Supplying of Micropipets - 0.1μL-2.5μL 0.5μL-10.0μL 10.0μL-l00μL 20.0μL-200μL l00μL-l000μL as per Department incharge 377 Supplying of Quebec Colony Counter -Count the microbial colonies as per Department incharge 378 Supplying of Light Microscope (General) 10X,20x, 45x, l00x Visualize microorganisms as per Department incharge 379 Supplying of Bifocal microscope with illuminators, Camera attachment and computer Visualize microorganisms and microgrphy as per Department incharge 380 Supplying of Magnetic stirwith Hotplate and magnetic beads To stir the liquids , preparation of solution as per Department incharge 381 Supplying of Heating mantle For heating round bottomed flask/distillation flask as per Department incharge 382 Supplying of Microwave oven To heat liquids instead of flaming. Samsung/ LG 20 Ltrs as per Department incharge 383 Supplying of Glass Dessicators Used for dessication as per Department incharge 384 Supplying of Fluorescence microscope A fluorescence microscope is an optical Microscope that uses fluorescence and phosphore scence instead of,or in addition to, reflection and absorption to study properties of organic or inorganic substances as per Department incharge 385 Supplying of Electronic Analytical Balance It is used to weigh small quantities of chemicals and samples precisely and quickly. Readability- 1 mg (0.001 g) Cap.- 420gm as per Department incharge 386 Supplying of Electronic Top pan Balance- Readability- 0.1 g Cap.- 2 kg.as per Department incharge 387 Supplying of Double Distillation Unit ,.Approx output: 2 Lit/hrs Wattage:3.3 .KW With safety Cutoff Device Water Stills are carefully designed to produce high purity pyrogen free distiiied water. The water still comprises ofborosilicates glass horizontal typeboiler, coil condenser, constant level device, silica sheathed heaters, along with stand and clamps. All parts are replaceable. pH/conductivity:6-7 / 1-2 μSiem forsingle, 6-7/0.8-lμS/cm for double distilled water as per department incharge 388 Supplying of Microtome-5286(Product Specification Minimum Setting Value-0.5 um,Object Feed-28 mm,Vertical Stroke-60 mm,Specimen Orientation X and Y Axis Universal 8 Degree Trimming Thickness Range-1 um-100 um Operation-Automatic. (Motorized Feed & sectioning and Emergency Stop Provided),Sectioning Speed-0-400 mm/sec.,Specimen-Orientation Z Axis-Upto 360 Degree,Retraction Value-Adjustable Max Specimen Size-50 x 50 mm,Section Thickness Range-0.5 um-60 um)Senior rotary microtome as per Department incharge 389 Supplying of Cryostat -(Product Specification Section Thickness Range-0.5 Micron to 100 Micron (with the increment of 0.5 Micron, 1 Micron, 2 Micron, 5 Micron) Power Supply-220v,Dimension-750mm x 750mm x 950mm (approx) Weight -123 kg (approx),Remote Control-Optional,Sectioning Mode-Single step mode/ Continuous mode Hand Wheel Control-Feather Touch Keypad/ Foot Switch/ Remote Control (optional),Sterilization-U.V-C Sterilization,Cooling down time Up to -30 DegreeC-2 Hour 30 Min Specimen Retraction setting Range-5 Micron to 100 Micron (with increment of 5 Micron),Compressor-Dual Compressor,Cryo Chamber Temp. Adjustable -1 DegreeC to -30 DegreeC Block Holder Head Temperature-Adjustable -1 DegreeC to -35 DegreeC Illumination-LED Lamp)Ultimate usico fully automatic cryostat as per Department incharge 390 Supplying of ELISA -Vet scientific(Specification-Product Specification Automation-Semi Automatic,Assays Performed-ELISAs, Immuno Assays Plate Format-96 well,Optical System Filter-based Detection Method-Absorbance,Number Of User Programs 42 Storage-100000 Results,Filter Positions-8 Display Type-Touch Screen Packaging Type-EXPORT QUALITY,Testing Speed-3 second Type Of Filter 405,450,492, 630,Power Source-115/230 V AC, 50Hz,Weight-9 Kg,Is It Portable-Non Portable, sample Type-Serum, Plasma, Urine, CSF, Whole Blood,sample Volume Range-10-100 Interface-RS232/ USB) as per Department incharge 391 Supplying of Calorimeter -A VI Digital (A VI Scientific,Frequrcy:50Hz,Voltage:230-280V,operating time per test-10 min) as per Department incharge 392 Supplying of HaemometerSahli type-Microsidd (Specification:Amber coloured glass bottle -1 No.,Glass Stirrer-1 No.,Dropper with teat -1 No.,Cleaning Brush -1 No.,Spare latex tubing one meter -1 No.Round tube haemoglobinometer) as per Department incharge 393 Supplying of Anti - theft Sticker with the University logo as per Department incharge 394 Supplying of Middleware Application Desktop(Write and Read Tags) as per Department incharge 395 Supplying of RFID Staff Station or desktop reader (Used for tagging of books and circulation {lssue/Return) operations through RFID) as per Department incharge 396 Supplying of Integration with Software and Training of Complete RFID System as per Department incharge 397 Supplying of RFIDSecurityGates (2 pedestals-1 gate) RFID Security Gate (Single Lane) as per Department incharge 398 Supplying of Automated Book drop Box as per Department incharge 399 Supplying ofCabling. Casing. Wiring , Switches as per Department incharge 400 Supplying of Freight Transportation of Miidle ware Application Desktop,RFID STAFF Station,Integration with software training,Automated Drop box ,Cabling,Casing,Wiring,Switches as per Department incharge 401 Supplying of LAN . Switches, Necessary Cabling, Casing , Power Supply port including cables as per Department incharge 402 Supplying of Dedicated serverGHZ 16 core 1P-32GB -RP408ia -NC8SFF800WPS Serverintel Xeon -G5218 Kit for DL 380 GEN-10-HPE 32GB 2RX4 PC-4 2933YR Smart kit ,HPE DL38x Gen 10-12 Gb SAS Expande,HPE DL 380Gen 10 Box 1/2 Cage Bkpin kit ,HPE 24TB SAS 12G 10K SFF SC 512eDS HDD .HPE 800 WFS Ht Plg LHPwr Sply kit,HPE 3 Year Fiundation care 24x7 DL 380 Gen 10 Serviceas per Department incharge 403 Supplying of RS 86+_TB619RS, 3GB RAM and 48 GB ROM,4K Display Android model,3 GB RAM And 48 GB ROM,slim frame,Anti Glare Glass,3M Anti glare H7 Anti touch surface hardness lightweight for easy installation,Media suits for Annotation,Software bundled with education apps,Office suits,Great writing experience,Object recognition -First pal,/Fine pen ,Touch Points-20 points under window and 10 points under android,178 degree viewing angle IR ,Touch 15000,1 contrast ratio,4 MS Response time 50000 hours life,Reduce clutter and bring efficiency for the faculty,Remote control,15 wattX2 speaker,Android 8.0,Newline cast,Display management,Newline broadcast including installation and Trainingas per Department incharge 404 Supplying of Deep Fridgeas(2 in 1 Converti Freezer & Cooler Corrosion Resistant Cooling Coil & PPGI for inner & outer body Heavy Duty Compressor & Tropicalised Design Approximately 14% Higher Net Capacity compared to competition Sleek Design with heavy duty performance) per Department Incharge 405 Supplying of Autoclave (Horizontal,Height X Dia: 450mm x 250mm Height x Dia: 18Inch x 10Inch,Capacity: 22 Ltr,Load: 2.0 KW) as per Department Incharge 406 Supplying of Autoclave (Vertical): size- 400x600mm, Capacity- 75Ltr as per Department Incharge 407 Supplying of Hot air oven(Standard double wall fabrication. Inner chamber made of highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations.Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50c to 250c + 1c controlled by capillary type thermostat.Inner Chamber Size 18x18x18 inch. made of Stainless Steel) : any Standard make as per Department Incharge 408 Supplying of Bacteriological incubator(Item Weight ‎10 kg Product Dimensions-30 x 30 x 30 cm; 10 Kilograms,Item model number-12X12,Item Height-30 Centimeters Item Width-30 Centimeters) as per Department Incharge 409 Supplying of Bacteriological shaking incubator as per Department Incharge 410 Supplying of BOD incubator as per Department Incharge 411 Supplying of Laminar air flow any Standard company as per Department Incharge 412 Supplying of Micropipettes with microtips :(1.0uL-10.0uL, 10.0uL-100uL, 100uL-1000uL, 20uL-200uL): A. Prime Variable Pipette, B. Fully Autoclaveable Variable Vol. Pipetteas per Department Incharge 413 Supplying of Colorimeters with cuvettes any Standard company as per Department Incharge 414 Supplying of Western Blot apparatus, as per Department Incharge 415 Supplying of Powerpack with wiresas per Department Incharge 416 Supplying of Homogeniser as per Department Incharge 417 Supplying of PCR machine Block Formats 96x0.2ml(A),54x0.5ml(B), 96x0.2ml +77x05ml©, 384well(D) Size(WxDxH,mm)-380x270x250 as per Department Incharge 418 Supplying of UV Transilluminator/UV chamber UV source: 365nm Wave Length Viewing area: 24x14cm Anti Slip rubber foot provided for base as per Department Incharge 419 Supplying of CO2 incubator as per Department Incharge 420 Supplying of pH meter and buffers: A.pH meter B. pH buffers as per Department Incharge 421 Supplying of Water bath (any Standard company ) as per Department Incharge 422 Supplying of Fume Hood: size- 3x3x2 wooden with Granite working area as per Department Incharge 423 Supplying of Soxlet apparatus with heating mantle and distillation set up as per Department Incharge 424 Supplying of Kjeldahl Apparatus as per Department Incharge 425 Supplying of Ultrapure Water Purification System: MiliQ water as per Department Incharge 426 Supplying of Quebee Colony Counter as per Department Incharge 427 Supplying of Light Microscope (general) 25x, 45x, 100x s as per Department Incharge 428 Supplying of Bifocal microscope with illuminators as per Department Incharge 429 Supplying of Magnetic stirrer with magnetic beads(any Standard company )as per Department Incharge 430 Supplying of Magnetic stirrer with hot plate (Remi) as per Department Incharge 431 Supplying of Heating mantleas per Department Incharge 432 Supplying of Microwave oven ((20Ltr) as per Department Incharge 433 Supplying of Glass Dessicators as per Department Incharge 434 Supplying of Computer : Core i9, 7th Gen. 20 LED Monitor, 4GB DDV, 1TB HDD, DV writer HP/Dell as per Department Incharge 435 Supplying of Culture room: Tissue culture Rack fitted with 16 tubes, 8 bulbs, 4UV & Timer as per Department Incharge 436 Supplying of Electronic Analytical Balance:- Readability- 1mg(0.001g) Cap.-420gm as per Department Incharge 437 Supplying of ElectronicTop-pan Balance:-Readability- 0.1g Cap- 2kgas per Department Incharge 438 Supplying of Electroporator:- as per Department Incharge 439 Supplying of Fermenter(7.5L)(any Standard company )as per Department Incharge 440 Supplying of Fluorescence Microscopeas per Department Incharge 441 Supplying of Hot air oven universalas per Department Incharge 442 Supplying of Distillation Unit as per Department Incharge 443 Supplying of Membrane filter assembly 5000 mlas per Department Incharge 444 Supplying of Fluorimeter as per Department Incharge 445 Supplying of Homogeniser: Remi model- RQT-127 A/D High speed homogenizer, with 1/8 HP Motor, Homogenizer Working Volume [H2O] 0.1-50ml (Dispersing shaft DS-160/5) WEIGHT 0.6KG Dimension[LxWxH] 46mmx55mmx230 operating environment 0-40degre, 85% rel. humidity as per Department Incharge 446 Supplying of ELISA reader and Microtitre plates: ELISA Wavelength range 400nm-800nm Accuracy- +-1% at 1.0OD, 450nm Dimension 450x350x197mm as per Department Incharge 447 Supplying of Liminar air flow : 4x2x2 feet, stainless steel as per Department Incharge 448 Supplying of Gel Documentationd system as per Department Incharge 449 Supplying of 5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 450 Supplying of 12V/26AH- Batteryas per Department Incharge 451 Supplying of Headphone with built in microphone (Brand) as per Department Incharge 452 Supplying of Furniture:- Computer Table & Chairs & Table- Chair for lab. Instructor and student (50 students per batch) as per Department Incharge 453 Supplying of Network:- LAN, Switches, Cabling, Casing Power Supply Port including Cables as per Department Incharge 454 Supplying of 5.5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 455 Supplying of RS86+ TT8619RS 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0, Newline Cast, Display Managemen, Newline Broadcast Including Installation and Training. as per Department Incharge 456 Supplying ofpH meter(Digital) :- pH range: 0-14, Temperature Range: 0.0 to 100 C (Manual Compensation) as per Department Incharge 457 Supplying ofNoise Level meter:- Auto/Manual ranging from 30 to 130dB in 6 ranges as per Department Incharge 458 Supplying ofWater analysis Kit:- They include; alkalinity, chloride, hardness, iron, and sulphate as per Department Incharge 459 Supplying ofHigh volume sampler:- 1)PM-2.5- Designed to meet International Standards for High volume air Sampling of PM2.5 particulates. 2)PM-10-U.S EPA FRM Designed for the determination of suspended of PM-10 particulates concentrations. (RFPS-1287-063) 3)TSP- Designed to meet U.S EPA reference method for determination of total suspended particulates(TSP) concentration as perDepartment Incharge 460 Supplying ofSoil testing kit (mrinda parikshan kit) : Use for micro and macro nutrients as per Department Incharge 461 Supplying ofSeive plate with shaker : 5mm,1mm,2mm) as per Department Incharge 462 Supplying ofUV/Visible spectrophotometer:- Spectral bandwidth 1 nm (190 to1100nm , Lamp Type 20-W halogen lamp and deuterium lamp as per Department Incharge 463 Supplying ofAutoclave : 10-15 litre Steam Sterilizer as per Department Incharge 464 Supplying ofLaminar hood (Horizantal) : Horizontal air flow cabinet, filter air blow across the work zone in horizontal direction. This constant flow of air provides material and product protection as per Department Incharge 465 Supplying ofHot plate(pic):-Temperature range: 350 C as per Department Incharge 466 Supplying ofShakeer incubator Compact Bench top shaker with temperature control range from Ambient +50C to 600C. Tray dimension : 420x420 , Speed 50-350 rpm with accuracy of +/- 2rpm as per Department Incharge 467 Supplying ofMuffle Furnaces (15x125x250)cm: Temperature upto 35C to 1400C as per Department Incharge 468 Supplying of Analytical Balances:Capacity 220gram as per Department Incharge 469 Supplying ofDigester : 1) vessel size : Dia 39 mm (Aprox.); Volume 160ml 2)Temperature : upto 200degC as per Department Incharge 470 Supplying ofDouble distilled water plant: Model- Vertical:- Distlled Water Output Capacity-2.5 Litres/Hours, Distillate water quality as per Department Incharge 471 Supplying ofOven:- Dry ovens- 30 to 1000 litre capacity. as per Department Incharge 472 Supplying of B.O.D Incubator: Volume 68 Litre as per Department Incharge 473 Supplying ofMagnus Microscope:- Magnification 4x,10x,40x, and 100x as per Department Incharge 474 Supplying ofDesiccators:- Contain: Silica Gel dimension;12x12 in (30.5x30.5 cm),Material Glass as per Department Incharge 475 Supplying ofRichter scale hardness tester Portable Rockwell/brinell vickers Hardness Testing Instrument Mold metal hardness meter display:-parameter- HRC Display Type, Digital Model Name/Number- ATedigiHR, Accuracy- 0.1 HRC Dimensions of Machine base (approx.) 150x425 mm as per Department Incharge 476 Supplying ofProctor Penetrometer: Proctor Penetrometer- Complete with set of needle points Weight, 2 kg as per Department Incharge 477 Supplying ofGas Chromatography Retention time repeatability-< 0.008% or 0.0008 min Area rpeatability -<1% RSD, using 2ng tetradecane as per Department Incharge 478 Supplying of Atomic Absorption Spectrometry(AAS):- aa-7000 SERIES OF Atomic Absorption Spectrophotometers features high- sensitivity analysis as per Department Incharge 479 Supplying ofWavelength range; 400 to710nm Wavelength selection: 8 in-built gelatin filters: 430,470,490,520,540,580,600 and 710 nm Measurement ranges; 0-100%T, 0-1.50Abs, 0.1 to 1000 Concentration. Resolution: 1%T, 0.01Abs, 0.1 to 1 Concentration as per Department Incharge 480 Supplying of Laptops(of Specification:Processor Corei5,RAM:4GB,Hard drive:500GB ,Screen size:12 inch):as per Department Incharge 481 Supplying of Desktops: i7 3rd Gen, 1TB HDD, 4GB RAM, Windos 10, MS office, Graphics card as per Department Incharge 482 Supplying of Xerox Machine(Product Specification:Functions Multi-Function:Supported Paper Size-A3,Supported OS-all,Color Output-Black & White,Number Of Trays-4,Item Color-white and blue Print Speed-up to 35 ppm,Weight 129 kg,Print Technology-Laser Warm-Up Time, As fast as 11 seconds (black and white) Duty Cycle-WorkCentre 5335: Up to 150,000 pages / month Resolution-200 x 1200 dpi) as per Department Incharge 483 Supplying of Air Conditioning:-1.5 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 484 Supplying of Luminous Cruze 3.5KVA Inverter with RC 18000 Battery (4 Batteries) as per Department Incharge 485 Supplying of Projector(Special Feature-portable,Connectivity Technology,Bluetooth, Wi-Fi, USB, HDMI,Display resolution 1920 x 1080,Display Type-LED) as per Department Incharge 486 Supplying of Godrej Lecture Hall Furniture as per Department Incharge 487 Supplying of Electronic Podium(Speaker type-Tweeter,Auxillary,wireless,floor standing) as per Department Incharge 488 Supplying of Smart board (Screen size-11 inches,Connecting technology-Wifi,Multimedia)as per Department Incharge 489 Supplying of Black board( Melamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS CornersMelamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS Corners) as per Department Incharge 490 Supplying of Glassware rack as per Department Incharge 491 Supplying of installation of Air conditioner,Luminous Cruze,Projector,Lecture Hall Furniture,Electronic podium,Smart board and black board as per Department Incharge 492 Supplying of Inductively coupled Plasma - Optical Emission Spectrometer with CID detector technology for multi-element analysis of geological petrogical etc. samples in ppb level as per Department Incharge 493 Supplying of Suppressed ion analysis system for anion and cation analysis in water, wastewater, environmental samples and also upgradable to combustion for determination of corrosive halogens and sulfur in Petrochemicals, gaseous samples, solid samples, and complex samples as per Department Incharge 494 Supplying of CHNS/O for the analysis of Carbon, Hydrogen, Nitrogen, Sulfur and Carbon in organic matrices, soil, feed , plant samples, petroleum products, Coal, Coke, Biomass & Liquid Fuels as per Department Incharge 495 Supplying of Gas Analyzers for hydrocarbon and permanent gas analysis as per Department Incharge 496 Supplying of Benchotop XRD as per Department Incharge 497 Supplying of XRF Spectrometer as per Department Incharge 498 Supplying of Refrigereted Centifuge MakE-REMI, Model-C24 PLUS :- Max. Speed:20000, Max. RCF:3757, Max. Lowest Temp.:8, Noise:60db. Essential accessories Required: 01. Withangle Heads (with polypropulene tubes) Model-R-248M24x1.5ml 2)Voltage stabilizer:-03KW Servocontrolled Voltage Stabilizer, input 170volts to 260volts, output 220 to 240volts as per Department Incharge 499 Supplying of pH Meter compatible poer bank Make: REMI :- With eletrode as per Department Incharge 500 Supplying of Bench top Centrifuge Make: Tarson, : - SPINWIN MC-001 6 places Rotor for 1.5 ml tubeas per Department Incharge 501 Supplying of Deep Fridge: It is used to store chemicals and preserve samples at very low sub-zero tempertures or below as per Department Incharge 502 Supplying of Autoclave(Vertical) : size- 400x600mm capacity- 75Ltr as per Department Incharge 503 Supplying of Hot air oven : Sterilization as per Department Incharge 504 Supplying of Incubator Shaker: Growth and enumeration of microbes(Broth Cultures) as per Department Incharge 505 Supplying of Horizontal Laminar air flow:- Sterile environment size 4x2as per Department Incharge 506 Supplying of Ultrapure Water Purification System: MiliQ Water : for distil water as per Department Incharge 507 Supplying of Micropipets (Ependroff): 0.1uL-2.5uL, 0.5uL-10uL, 10.0uL-100uL, 100uL-1000uL each oo these 1pcs as per Department Incharge 508 Supplying of Light Microscope (general)10X, 20X, 45X, 100X, : Visualize microorganisms as per Department Incharge 509 Supplying of Bifocalcal Microscope with illuminators, Camera Attachment and comput: Visuallize microorganisms and micrography as per Department Incharge 510 Supplying of Magnetic stir with Hotplate and magnetic bead as per Department Incharge 511 Supplying of Heatingmant; for heatinground bottomed flask/distillation flask as per Department Incharge 512 Supplying of Microwave oven: To heat liquids instead of flaming. 20Ltrs as per Department Incharge 513 Supplying of kydroPro 100 handeld multiparameter water quality analiser: Turbedityas per Department Incharge 514 Supplying of Petrological Microscope: Study of Optical minrology as per Department Incharge 515 Supplying of Ore petrological microscope: Study of ore petrology as per Department Incharge 516 Supplying of Miscellaneous instruments as per Department Incharge 517 Supplying of glassware as per Department Incharge 518 Supplying of chemical as per Department Incharge 519 Supplying of Arc GIS(Latest) as per Department Incharge 520 Supplying of GCD Toolkits as per Department Incharge 521 Supplying of SURPAC Software as per Department Incharge 522 Supplying of Intergraph Edu Kit [GIS+RS] Version 2020 or latest(Software content as per list), 5 users for Erdas imagine Professional and 5 users for Geomedia professional Software as per Department Incharge 523 Supplying of Interactive Flat Panel as per Department Incharge 524 Supplying of 2 Virtual Class Room including capture, recording and streaming online, 1 Servers one per 05 classrooms per Department Incharge 525 Supplying of N-computing for smart classrooms including servers and clients as per Department Incharge 526 Supplying of Tagging of documents(books/hard-bound journals/CDs/technical films etc)in RFID Technology as per Department Incharge 527 Supplying of Sofwares, Server Machines, Air-Conditioning Systems,Xerox Machines, Lamination Machines, Binding Machines, Furniture/Furnishing, Computers, Printers etc as per Department Incharge 528 Supplying of Digital Podium, PTGN 500, Window & 1 LCD, Elecronic Lectern, on site OEM. Warranty 3years, 3GB RAM,4GB ROM as per Department Incharge 529 Supplying of Air Conditioning:-1.8 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 530 Supplying of Black/ White,Printer:- scan-copy all in printer- Branded as per Department Incharge 531 Supplying of CCTV set for floor: 55 LRD display for CCTV. CCTV Camera-1 P based CCTV camera 2TB space with NVR with necessary accessories as per Department Incharge 532 Supplying of 5KVA Inverter online UPS with battery backup 100Mah battery(8 units) as per Department Incharge 533 Supplying of Electrophoresis Apparatus as per Department Incharge 534 Supplying of Bacteriological Incubator as per Department Incharge 535 Supplying of Autoclave as per Department Incharge 536 Supplying of Centrifuge as per Department Incharge 537 Supplying of Rotar Head as per Department Incharge 538 Supplying of Rotar Head 25 as per Department Incharge 539 Supplying of Gel documentation system as per Department Incharge 540 Supplying of Spectrophotometers as per Department Incharge 541 Supplying of compoud Microscope as per Department Incharge 542 Supplying of Trinocular Microscope with camera as per Department Incharge 543 Supplying of Semi-Automated Microtonne as per Department Incharge 544 Supplying of DNA Sequencer as per Department Incharge 545 Supplying of Spectrophotometer as per Department Incharge 546 Supplying of Laminar air flow chamber as per Department Incharge 547 Supplying of Tissue culture rack as per Department Incharge 548 Supplying of PCR Apparatus as per Department Incharge 549 Supplying of Liquid nitrogen cylinder as per Department Incharge 550 Supplying of TLC apparatus kit as per Department Incharge 551 Supplying of TLC Visualizer/documentation as per Department Incharge 552 Supplying of HPLC System as per Department Incharge 553 Supplying of Scientific vortex mixer as per Department Incharge 554 Supplying of Soil Thermometer as per Department Incharge 555 Supplying of Scientific Digital Balance as per Department Incharge 556 Supplying Equipments for workshop,Seminar & Excrusion as per Department Incharge 557 Supplying Equipments for Non-Recurring(Research Equipment) as per Department Incharge 558 Supplying Equipments for Recurring(Chemical & Glassware) as per Department Incharge 559 Supplying of Furniture Bookshelves, Study Tables and Chairs for Readers as per Department Incharge 560 Supplying of Desktop i5 Processor, 7th Generations, 500GB HDD, 4GB RAM, 23.8 inch, LED backlit Monitor Full HD IPS Panel (Brand: HP/DELL) as per Department Incharge 561 Supplying of Headphone with built in microphoneas per Department Incharge 562 Supplying of Printer with scanner (Laser,Colour/B/W)as per Department Incharge 563 Supplying of Scanner(USB,25.2D x 36.8W x 4.3H Centimeters,Slide) as per Department Incharge 564 Supplying of Xerox Machine:- (,Platen cover & Toner, Resolution (DPI):1200 X 1200dpi, Duty Cycle:1.3 Sec) as per Department Incharge 565 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-500mm,Laminating speed-1200mm)as per Department Incharge 566 Supplying of CCTV Camera(Full HD Picture,AI Powered Motion Detection,Infrared Night Vision; 360° Panorama,Talk Back Feature (2-Way Audio)Material Type: Plastic; Included Components: Camera, Power Adapter, Charging Cable, Wall Mounting Kit, User Manual; Specific Uses For Product: Surveillance) as per Department Incharge 567 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 568 Supplying of RS75+ TT7519RS RS 75+ comes with 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management. as per Department Incharge 569 Supplying of Wall Mount Kit(Material: SS,Max loading capacity-60 to 100kg) as per Department Incharge 570 Supplying of Live streaming software Software Software for Live Streaming or Live telecast as per Department Incharge 571 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 572 Supplying of Frieght Transportation of 4K Display,Wall mount kit,Live Streaming software as per Department Incharge 573 Supplying of cctv solutions for Department with 20 cameras(Image Sensor Type-CMOS,Image Sensor Size-0.357 inch,Camera Image Sensing capacity (Picture Mode)-2MP,Resolution-Full HD (1920 x 1080 Pixel)-Day/Night Capable-Yes,IR illumination Range(mtr) 200 Type of Camera HousingDOME CAMERA,IP Camera Yes) as per Department Incharge 574 Supplying of installation and commisioning of CCTV and other computer equipment as per Department Incharge 575 Supplying of 55 Tv for seeing all cctv in HOD room as per Department Incharge 576 Supplying of8 PORT EPBX as per Department Incharge 577 Supplying ofTELEPHONE as per Department Incharge 578 Supplying ofWIRE as per Department Incharge 579 Supplying of CRON BOX as per Department Incharge 580 Supplying ofSWITCHES FOR PORTS as per Department Incharge 581 Supplying of Workststion Table, Chairs, Desktop, UPS as per Department Incharge 582 Supplying of LAN, Switches, Necessary Cabling, Casing Power Supply Port including Cables as per Department Incharge 583 Supplying of Refrigerator(Storage & Interior Description : | Cooling Type ; Frost Free | Display Type ; Thermostat | Shelf Material ; Toughened Glass | Compressor Type ; Reciprocatory)as per Department Incharge 584 Supplying of Microwave(Special Features: Quartz Heater - Concealed Heating. Safer Cooking, Stainless Steel Cavity - More Hygienic. More Durable, Child Lock - Ensures complete safety especially for homes with young children, Interior light)as per Department Incharge 585 Supplying of Washing Machine( Fully automatic 6 kg) as per Department Incharge 586 Supplying of Sewing Machine(Motorised)as per Department Incharge 587 Supplying of Weighting Machineas per Department Incharge 588 Supplying of Blood Pressure Monitor as per Department Incharge 589 Supplying of Oximeter as per Department Incharge 590 Supplying of Gluco Meter as per Department Incharge 591 Supplying of Test Tube & Breakers as per Department Incharge 592 Supplying of RO Water Purifier as per Department Incharge 593 Supplying of Microscope(Student) as per Department Incharge 594 Supplying of Crockery Set as per Department Incharge 595 Supplying of Cocking Utensils set as per Department Incharge 596 Supplying of Cutlery Set as per Department Incharge 597 Supplying of Sofa Set + Centre Table as per Department Incharge 598 Supplying of A.C (Split 2 Ton,3 Star,Twin invertor HD Compressor)as per Department Incharge 599 Supplying of Stabilizer(Automatic Voltage Stabilizer,37.4 x 27.1 x 19.8 Centimeters,5 kg 700 g)as per Department Incharge 600 Supplying of Inveter with battery(Capacity -100AH,Battery Type-Tubular Battery,Warranty-1 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 1 FAN ,28 Light , 8 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 601 Supplying of Desktop Computer with UPS and Computer Tableas per Department Incharge 602 Supplying of Original operating system software window 10 with Antivirus as per Department Incharge 603 Supplying of Printer with scanner (inkjet,Colour/B/W)as per Department Incharge 604 Supplying of Dining Table Set as per Department Incharge 605 Supplying of Camera as per Department Incharge 606 Supplying of Mixer Grinder as per Department Incharge 607 Supplying of Iron as per Department Incharge 608 Supplying of Wall Clockas per Department Incharge 609 Supplying of Whole tailoring Equipments (Local) as per Department Incharge 610 Supplying of Knitting Equipments(Local) as per Department Incharge 611 Supplying of Flower Arrangement Equipments) (local) as per Department Incharge 612 Supplying of Aluminium Set as per Department Incharge 613 Supplying of Plastic Tub as per Department Incharge 614 Supplying of Dustbin(Big) as per Department Incharge 615 Supplying of Basket &Mug as per Department Incharge 616 Supplying of White Table Cloth(Big size)as per Department Incharge 617 Supplying of Wash Basin(Local)as per Department Incharge 618 Supplying of Gas Stove +Cylinderas per Department Incharge 619 Supplying of Curtains(Local) as per Department Incharge 620 Supplying of Floor Mats (Local) as per Department Incharge 621 Supplying of Tube Lightas per Department Incharge 622 Supplying of Fan as per Department Incharge 623 Supplying of Led Projector(New Edition)as per Department Incharge 624 Supplying of Smart Board(specification:white,power consumption<150w ,usage-school,Effective touch-65x46) as per Department Incharge 625 Supplying of Decorative Items(Local) as per Department Incharge 626 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 60 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 15000 ppm,Features-Two-sided printing,Weight-25kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scanner multi as per Department Incharge 627 Supplying of Ceiling Fanas per Department Incharge 628 Supplying of Exhaust Fan as per Department Incharge 629 Supplying of Pedestal Fan as per Department Incharge 630 Supplying of Inveter with battery(Capacity -200AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 14 Hrs Backup- 4 FAN , 8 Light , 14 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 631 Supplying of Wooden Stool(Local) as per Department Incharge 632 Supplying of Wash Basin (Local) as per Department Incharge 633 Supplying of Register (Local) as per Department Incharge 634 Supplying of Stabilizer for ACas per Department Incharge 635 Supplying of Tubelightas per Department Incharge 636 Supplying of Dustbin (Local) as per Department Incharge 637 Supplying of Curtains (Window and Door) (Local)as per Department Incharge 638 Supplying of Door Mat(Local) as per Department Incharge 639 Supplying of Broadband(Wifi)as per Department Incharge 640 Supplying of Furniture Bookshelves, Study Tables and Chairs for attendant and students (30 students at a time) as per Department Incharge 641 Supplying of Wireless mic as per Department Incharge 642 Supplying of Weight Box(100g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 643 Supplying of Weight Box(50g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 644 Supplying of Kymograph :-with smoked paper, smoked Drum, Time marker as per Department Incharge 645 Supplying of Memory Drum :- Electrical operated as per Department Incharge 646 Supplying of Memory Drum :- Hand operated as per Department Incharge 647 Supplying of Metronome :- Mechanical as per Department Incharge 648 Supplying of Porteuz Maze Test as per Department Incharge 649 Supplying of Techisto-scope :- Fall Drop type as per Department Incharge 650 Supplying of Techisto-scope :-Electronic as per Department Incharge 651 Supplying of Verniers chronoscope :- Pendulum Type as per Department Incharge 652 Supplying of Ergograph/Smoke drum /smoke paper varshing tray and varnish :- Hand grip model as per Department Incharge 653 Supplying of Weight 6Kg as per Department Incharge 654 Supplying of Multiplication sheets(100sheet) as per Department Incharge 655 Supplying of Screen:- Wooden as per Department Incharge 656 Supplying of Ravens Progressive Matrices as per Department Incharge 657 Supplying of Weschlers Intelligence scale (Adult) as per Department Incharge 658 Supplying of Cattles 16 PF Questionnaire as per Department Incharge 659 Supplying of Jungs Word Association Test as per Department Incharge 660 Supplying of Thematics Apperception Test as per Department Incharge 661 Supplying of Zeigarnik Effect Test as per Department Incharge 662 Supplying of The Occupational Stress Index(OSI) Scale by A.K Shrivastawa and A.P. Singh as per Department Incharge 663 Supplying of Rorschach Test as per Department Incharge 664 Supplying of Coping Strategies Test by A.K. Shrivastava as per Department Incharge 665 Supplying of Job Satisfaction scale(JSS) by Amar Singh and T.R. Sharma as per Department Incharge 666 Supplying of Job Involvement Scale by A.K. Singh and R. Kapoor as per Department Incharge. 667 Supplying ofOrganizational Climate Scale by Somnath Chatopadhya and K.G. Agarwal as per Department Incharge 668 Supplying of Managerial Aptitude Scale(MAS) by Santosh Dhar, Upinder Dhar and Priyanka Sharma as per Department Incharge 669 Supplying of Employees Motivational Scale by A.K. Shrivastava as per Department Incharge 670 Supplying of Employees Mental Health Inventory (EMHI) by Jagdish as per Department Incharge 671 Supplying of Beck Depression Inventory by Arron Beck as per Department Incharge 672 Supplying of Aggration Scale (AS) by G.P. Mathur and Rajkumar Bhatnagar as per Department Incharge 673 Supplying of Ego Strength Scale by Q. Hassan as per Department Incharge 674 Supplying of Bells Adjustment Iventory by S.M. Mohsin and Shamshad as per Department Incharge 675 Supplying of Marital Adjustment Questionnaire by P. Kumar and kanchan Rohtagi as per Department Incharge 676 Supplying of Sacks Sentence Completion Test as per Department Incharge 677 Supplying of PGI Health Questionnaire N-1 (PGIHQN) by S.K. Verma, N.N. Wig and D. Prasad as per Department Incharge 678 Supplying of Rotters Locus of Control Scal by Anand Kumar and S.N Srivastava as per Department Incharge 679 Supplying of Self Concept Inventory by O.N Srivastava as per Department Incharge 680 Supplying of PGI Social Support Scale by S.K. Verma, P. Kulhara and Ritu Nehraas per Department Incharge 681 Supplying of Emotiobnal Maturity Scale(EMS) by R.R. Trtipathi as per Department Incharge 682 Supplying of Life satisfaction Scale(LSS) by Q.G. Alam and R. Srivastava as per Department Incharge 683 Supplying of PGI Quality of Life Scale by S.K Verma and A.C. Moudgil as per Department Incharge 684 Supplying of Environmental Awareness Scale (EAS) by Haseen Taj as per Department Incharge 685 Supplying of Jatota Test of Group Mental ability as per Department Incharge 686 Supplying of Weinsteins Noise Sensitivy Scale (WNSS)(Shore Samvedi Mapak) by P. Bhatia, S. Mohar and I.S Mohar as per Department Incharge 687 Supplying of State Traight Anxiety Test (STAT) as per Department Incharge 688 Supplying of Xerox Machines (Digital)(Product Specification:Copy | Print | Scan | Fax,Number Of Trays-2,Item Color-Black,Duty Cycle-20000,Print Technology-LaserPrint Speed-25 Paper Per Minute ) as per Department Incharge 689 Supplying of Binding Machine (Product Specification:Capacity-12-15 Sheets,Binding Style-Manual ,Max Binding Thickness<20 mm Max Binding Sheet Width 200-300 mm,Automatic Grade-Semi-Automatic,Weight-5.8Kgs Approx.,Dimension-375x230x150mm Approx.Automation Grade,Hole Size-3x8mm,Paper Size-A4 /Letter /A5 etc,Packaging Weight-375 mm,Handle Type-metal,Packaging Size-375x230x150mm Approx.Adjustable Margin-2.5/4.5/6.5mm,Usage/Application-Comb Binding Method Of Operation-Manual,No Of Punch Holes-21 holes Number Of Punch Slots-21 holes,Size-A4,Number Of Punch Holes-21 holes,Machine Dimension-375x230x150mm Approx.Is It Padded)as per Department Incharge 690 Supplying of Printers(Ink End Sensor-yes,paper storage capacity-100 sheets Paper Input, 50 sheets Paper Output-printing technology ink tank,connecter type-Wi-Fi, USB,special feature-Cost per print - 9 paise (Black & White), 33 paise (Colour) as per Department Incharge 691 Supplying of Furnishing (Book shelves:Study table and chair)as per Department Incharge 692 Supplying of Book Case(for Psychological Tests) as per Department Incharge 693 Supplying of Open Racks as per Department Incharge 694 Supplying of Inveter with battery(Capacity -150AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 2 FAN , 2 Light , 12 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 695 Supplying of Inverter with Battery(Capacity-150,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit Backup Time-5hrs,Battery Condition-New)as per Department Incharge 696 Supplying of Desktop(Product Specification:Hard Drive Capacity-320GB,Operating System-Window,Screen Size-17 inch Processor-i5,Display Type LCD Processor) as per Department Incharge 697 Supplying of Tally sofware (Multi User) as per Department Incharge 698 Supplying of Barcode Machine(Product Specification:Type-Thermal Printers,Max Printing Size-10 IPS,Resolution (dpi)-203dpi Model/Type-Citizen CLS-700,Automatic Grade-Fully Automatic Print Line-1~3 Lines) as per Department Incharge 699 Supplying of Server Machines(Product Specification:Memory-1x16 GB RAM/ Open Bay- 2.5 Hot Swap SAS/ SATA,Power Supply 220 V,Networking Type-LAN,Number Of Ports/Channels-8 USB Port-Yes Processor Speed Intel Xeon Silver 4114 (Deca Core) 2.2GHz Power Consumption 750 W) as per Department Incharge 700 Supplying of LAN connection between 7 computers as per Department Incharge 701 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 30 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 10000 ppm,Features-Two-sided printing,Weight-16.8kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scannercannon image Class MF641CW multi as per Department Incharge 702 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-330mm,Laminating speed-600mm)as per Department Incharge 703 Supplying of Binding Machine (Punches-43 holes,Hole distance-43 holes in A 11 SHEET,Binding sizes:Max 11) as per Department Incharge 704 Supplying of Computers (Processor -AMD Ryzen 3,RAM-8GB,HDD-512 GB,screen size-19.5 inches,Operating system:Windows 11 )as per Department Incharge 705 Supplying of Office Computer (Processor:i5 10th,HDD:1 TB,RAM-4 GB,GT730 4GB Graphics) as per Department Incharge 706 Supplying oflaser printer(Product Specification:Color Output-Black & White,Function-Print | Scan | Copy,Max. Print Speed (Black)-18 ppm Max. Print Speed (Color)-17 ppm,Connectivity-Ethernet,Paper Size-A4,Print Volume-Up to 500 pages/month) as per Department Incharge 707 Supplying of Smart class Board(Power consumption:220-300V,size/Dimension-65,Input type-finger Touch) per Department Incharge 708 Supplying of Double battery(capacity-250Ah,Over current protection) Inverter(Back up time-5 hrs) as per Department Incharge 709 Supplying of Desktop Computers :- HP 23.8-inch FHD All in One Desktop with Alexa Built-in(10th Gen Intel Core i3- 1005G1/8GB/512 GB SSD/Windows 10/MS Office 2019/Natural Silver), 24-dp0816in as per Department Incharge 710 Supplying of Printer, ScannerMulti-Function Direct Wireless Network Laser Printer (Print, copy, scan, Black) as per Department Incharge 711 Supplying of Networking (LAN, leased lines, wi-fi, switches etc.) TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200Mbps Wi-Fi Speed, 5 Gigabit Ports, 4 External Antennas and 1 Internal Antenna WiFi Coverage with Access as per Department Incharge 712 Supplying of Back up support(UPS, Generator, Transformer):-600VA UPS for Desktop/PC/Computers(not for Routers) with Automatic Voltage Regulation as per Department Incharge 713 Supplying of Xerox Machine:- (IR2004 With Duplex, Platen cover & Toner, Resolution (DPI):600 X 600dpi, Duty Cycle:4.3 Sec) as per Department Incharge 714 Supplying of IBM SPSS(Statistics Package Latest Version) as per Department Incharge 715 Supplying of Nvovo(Package) as per Department Incharge 716 Supplying of LCD Projector:- 1)Project movies,images or data from your devices,most effective in dark settings 2)Projector, Lens Cover/Stand, Carrying Pounch, USB Cable 3) Connect via Wi-Fi to Android smartphones and tables or connect HDMI to iPhone or iPad as per Department Incharge 717 Supplying of Projector Screen:- 1)10 Feet x 6 Feet, 133 Dia, 16:9 Format, UHD-3D-4K 2)Comes with FULL HD 1080P 3D and 4K Viewing Technology, Anti UV coating as per Department Incharge 718 Supplying of DTH connection:- 1)HD Set Top Box 2)Recording facility as per Department Incharge 719 Supplying of Television Set:- 1) Smart LED TV-42 inches 2)4K UHD (Resolution:3840x2160) 3)Connectivity-Input:3*HDMI,3*USB 4)Audio:20W output 5) 4K HDR provides exceptional clarity 6)Smartphone connectivity : Photo sharing plus, screen mirroring as per Department Incharge 720 Supplying of as per Desktop:- Intel i7, 8th Gen, 4GB N-Vidia Geforce Graphics card, 16 GB RAM, Monitor, CPU, Mouse, key board partment Incharge 721 Supplying of Multifunction Laser Printer,Scanner, and Copier :- Functionality: Print, Scan,Copy Print Technology : Monochrome Laser Connectivity: Hi-speed USB, Compatible with USB 2.0 Specifications4as per Department Incharge 722 Supplying of Speaker 7.1 surround stereo(Power -100W,Play tme-11 hours,Voice Range-9m) as per Department Incharge 723 Supplying of Digital SLR Camera: 1)EOS full HD movie mode with movie service 2)18 megapixel CMOS)APS-(sensor 3)14-bit A/D conversion 4)ISO 100-12800)EXPANDABLE TO h:25600(5)Dual Lens camera 55-250mm IS II lens 6) Camera battery charger and bag 7)Wide strap USB cable, software CD. as per Department Incharge 724 Supplying of 24.2MP DigitalSLR Camera:- 1)100% Viewfinder Coverage 2)CMOS sensor with impressive high-resolution result 3)Camera battery, charger, and bag 4)Wide strap USB cable, software CD, manual as per Department Incharge 725 Supplying of Quark express as per Department Incharge 726 Supplying of Adobe Suite(CS6 Master Collection) as per Department Incharge 727 Supplying of Cool Edit Pro as per Department Incharge 728 Supplying of Turnitin as per Department Incharge 729 Supplying of Sound Forge as per Department Incharge 730 Supplying of 18-55mm normal lens as per Department Incharge 731 Supplying of 55-250mm Zoom lens as per Department Incharge 732 Supplying of 18-135mm lens as per Department Incharge 733 Supplying of 35mm prime lens as per Department Incharge 734 Supplying of 80mm macro lensas per Department Incharge 735 Supplying of Tripods as per Department Incharge 736 Supplying of DSLR:- 1)Powered by NP-F570 InfoLithium rechargeble battery pack 2)Records to MiniDV tape stock 3)16:9 widescreen recording 4)3CCD video camera 5)12x optical zoom lens 6)Records to MiniDV tape stock as per Department Incharge 737 Supplying of:- 1)3CCD video camera 2) Crystal Engine 3)Shoulder -Type Design 3)One Touch Navigation 4)Manual Focus Ring 5) 0 lux colour light view 6)10x optical zoom 6)500x digital zoom 7)Super image stabilizer 8) DV IN/OUT Terminal 8)5-mode programme AE: sports, portrait, low light, spot light, and surf &snow 9)SP/I.P recording 10)Back light compensation 11) Cinema mode )16:9 aspect ratio( 12)Infra-red remote controller as per Department Incharge 738 Supplying of Tripods:- 1)3-way head with adjustable pan 2)Steady rubberized legs 3)Multipurpose head with quick release 4)Multipupose head for DV cameras 5)Made from High Grade Aliminium Alloy 6)Quik flip leg locks 7)Fluid pan&tilt movement 8)Quik release plate& Bubble Level as per Department Incharge 739 Supplying of i-Mac(Product Specification,Storage Capacity-256 GB Display-24 inch,Memory Size-256gb ssd,assembled Product Dimensions L X W X H,461 mm x 547 mm x 130 mm, 4.48 kg Color-Silver & Blue,Graphics-8_core GPU,Video Support And Camera 4.5K,Bluetooth-Bluetooth 5.0,Weight-4.48kg,Operating System-macOS Big Sur,Processor- M1Echip,Line Voltage-100-240V AC) for Video Editing as per Department Incharge 740 Supplying of Photographic Design Flash Bender-Small Reflector:- 1) Make a bounce flash reflector, gobo, or snoot 2)Packs flat/great for travel 3)Attaches quickly & securely 4)Adjustable to fit all popular brands of accessory flash 5)For on-camera or off-camera flash as per Department Incharge 741 Supplying of Rim Collapsible softbox Diffuser with Rim :-1)Softbox 36 inches/90 Centimeters with Grey Rim and Bowens Mount, Portable and Quick Folding Softbox Diffuser for Photography Speedlites Flash Monolight 2)for 660 LED Panel-Outer 16.3x6.5 inches,Inner 9.8x8.7 inches Collapsible Light Reflector 3)with Stap Attachment and Carrying Bag for Photo Studio Portrait Video Shooting as per Department Incharge 742 Supplying of Handheld Camera Stabilizer with Quik Release for DSLR:- 1)Light weight, handheld video image stabilization 2)FlyCam 3000 video cam stabilizer accepts camera upto 3.5kg/7.7Ibs. 3)Easy attach a small LCD monitor with Flycam 3000 cam stabilizer when needed. 4)Precision Aluminum made 5)23 tall and just 207 Ibs without counter balance disc. as per Department Incharge 743 Supplying of Green/Blue matte screen )Chroma key( :- 1)8x12 ft Blackboard, perfect for television, video production and digital photography. 2)Rod pocket on each top edge allows to be draped or hung. 3)Finishing along all edges to prevent tears. 4)Made of 100 %pure cotton, good vertical sense and durable as per Department Incharge 744 Supplying of Professional Grade Backdrop Cum Light Stand of 8 Feet Height:- 1)Photography Backdrop Stand Kit. 2)Stand of 8 Feet Height 3)8x12 ft Blackboard, perfect for television, video production and digital photography. 4) Package Contents; 1Pcs White Backdrop , 1Pcs Black Backdrop and Set of Black Backdrop stand. 5)Bag to carry as per Department Incharge 745 Supplying of Video Mixer (Four Channel Digital Video Mixer With Effects, including installation and training):- 1) four channel video mixer by incorportating HDMI inputs/outputs, USB streaming, HDCP support, built-in touch multi-viewer, and audio embedding . 2)(3Input)SD HDMI/Composite +(1Input) Up to1080p HDMI/RGB/Component/Composite. 3) PGM Output) Up to 1080p HDMI + RGB/Component +Composite +(PVW Output)PVW/Multiviewer(. 4)480p/576p Progressive internal processing 5.) Built-in multi-viewer ith touch control 6). Built-in frame synchronizers on all inputs 7). Scalers on CH 4 and Output 8). 259 Transitions 148 Effects 9). HDCP Compliant 10) Audio Embedding 11) Audio Mixer & Delay -up to 4 Fframes 12) USB Streaming Out for web-streaming 13) Video Processing:4:2:2 )Y/b/Pr(8 bits)Internal Processing :480/59.94p when set to NTSC, 576/50p when set to PAL( 14) Input Formats :HDMIVideo: INPUT 1 to3 : reqyires 720x480/59.94p )when set to NTSC( 576/50p ) When set to PAL(15) Input Formats : HDMI and Component Video : INPUT 4:480/59.94p, 720/59.94p, 1080/59.94i, 1080/59.94p )when set to NTSC (576/50i, 576/50p, 720/50p, 1080/50i, 1080/50p )when set PAL( as per Department Incharge 746 Supplying of Studio Condenser Microphone :- 1)Professional, large-diaphragm condenser microphone for unsurpassed audio quality 2) Idea as Mian and support microphone for studio and live applications. 3) Cardioid pickup pattern for outstanding sound source separation and feedback rejection 4)Pressure-gradient transducer with shock-mounted capsule. 5)Ultra-low noise, transformerless FET inputeliminates low-frequency distortion. 6) LED indicates phantom power operation. 7)Swivel stand mount and transport case included. 8)Ultra-rugged construction with metal die-cast body 8)Gold-plated 3-pin XLR output connector for highest signal integrityas per Department Incharge 747 Supplying of Digital Monitor/Speaker System(in Pair) :- 1)Two-way active monitor system for multimedia workstations and keyboard monitoring 2)High-power woofers and tweeters powered provided a linear frequency response 3)optical and coaxial inputs to directly connect digital audio sources via S/PDIF interface 4)Two stereo analogue inputs featuring 1/8 TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source 5)Features 1/4 TRS headphone connector with auto-mute function easily accessible from the front panel 6)2x Stereo Anaog Inputs )TRS and Stereo RCA Connectors( 7) 1/4-inch TRS headphone connector with Auto-mute Loudspeaker Function 8)1/8-inch TRS and Stereo RCA connectors as per Department Incharge 748 Supplying of Lapel Clip-on Microphone for DSLRs Camcorders Video Cameras and Iphone Smart Phone :- 1)Omni directional lavalier microphone, designed for Smartphones, DSLR, Camcorders, Audio recorders PC etc, perfect for video use. 2) With Omni pickup pattern, for full 360A coverage, 3) minimum 6-meter )20(cable with 3.5mm 4-pole gold plug for smarty phone connection as per Department Incharge 749 Supplying of Micophone Stand:- Steel stands for hand held microphones in studio with a base supporting system as per Department Incharge 750 Supplying of MP3 Digital Voice IC Recorder LCD :- 1)Digital Voice IC Recorder 2)LCD Screen 3) 23hrs life with 4GB Memory as per Department Incharge
Contract Date: Jun 17, 2026 Contract Value : ₹ 78.07 Crore
Government Departments No of Bidders 9
Jharkhand View Result →
15.
Educational and Research Institute #10088358 Price Bid
Supply Of Books , Library Books , Machine Design, T. V. Sundararajamoorthy & N. Shanmuga ,Anuradha Publications, Kumbakonam. , Revised Edition June-2003 , Industrial Motor Control., Stephen Herman ,Cengage Learning , 6Th Edition , Electrical Technology, Edward Hughes ,Addision– Wesley International Student Edition , Latest Edition , Mysql, Paul Dubois ,Addison Wesley , 4Th Edition , No Sql Distilled, Pramod J. Sadalage Martin Fowler ,Addison Wesley , 1St Edition Or Latest Reprint , American Society Of Metals – Hand Book – Volume 4 ( Forming), American Society Of Metals,American Society Of Metals , Latest Edition , Programmable Controller Theory And Implementation, L.A.Bryan E.A.Bryan ,An Industrial Text Company Publication , Latest Edition , Biomedical Instrumentation, M. Arumugam ,Anuradha Publications, Chennai , Latest Edition , Android Apps For Absolute Beginners, Jackson ,Apress , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Arasan Ganesan Institute Of Technology , 1993 , Home Refrigeration And Air Conditioning, Audels, Theo. ,Audel & Co. Publisher, New York. - 1998 , 199 Edn.49 , Remote Sensing And Geographical Information System, M.Anji Reddy ,B.S Publications , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , 1997 , Exploring Programmable Logic Controller With Applications, Pradeep Kumar Srivastava ,Bpb Publication , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , Latest Edition , Advanced Mobile Repairing, Pandit Sanjib ,Bpb Publication , First Edition 2010 , Modern Vcd Video Cd Player Introduction, Servicing And Troubleshooting, Manohar Lotia & Pradeep Nair ,Bpb Publication , Latest Edition , Explosing Programmable Logic Controllers With Application., Pradeep Kumar Srivastava. ,Bpb Publication , Latest Edition , Let Us C, Yeswanth Kanetkar ,Bpb Publication , 16Th Edition , Programmable Logic Controller, Pradeep Kumar & Srivashtava ,Bpb Publication , Latest Edition , Modern Computer Hardware Course, Manahar Lotai, Pradeep Niar, Payal Lotia ,Bpb Publication , Second Revised Edition 2011 , Inside Autocad, D. Raker And H. Rice,Bpb Publication , Latest Edition , Text Book Of Environmental Science And Technology, M.Anji Reddi ,Bs Publications , Latest Edition , Book 1 - General Aspect Of Energy Management And Energy Audit,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , Book 3 - Energy Efficiency In Electrical Utilities,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , National Building Code Of India – 2005,,,Bureau Of Indian Standards, New Delhi , Latest Edition , Total Quality Management, Oakiand.J.S.,Butterworth Heinemann Ltd. Oxford , 1989 , The Art Of Electronics, Paul Horowitz ,Cambridge University , 2Nd Edition Press , Performance And Design Of Ac Machine, M.G.Say ,Cbs Publisher & Distributor , Latest Edition , A Text Book Of Soil Mechanics, Dr S B Sehgal ,Cbs Publisher & Distributors , Latest Edition , Building Repair And Maintenance Management, P.S.Gahlot ,Cbs Publisher & Distributors (P) Ltd , Latest Edition , Learning Material Development Project – Nitttr,,Cd Programme On Gps And Gis. , Latest Edition , Introduction To Programmable Logic Controllers, Gary Dunning ,Cengagelearning India Pvt Ltd , Latest Edition , Building Materials, S.C.Rangwala ,Charotar Publishing House , 1982 , Building Construction, S.C.Rangwala ,Charotar Publishing House , Latest Edition , Mechanics Of Structures (Vol Ii), S.B. Junnarkar ,Charotar Publishing House , 22Nd Edition , Highway Engineering, Rangwala ,Charotar Publishing House , 2010 , Railway Engineering, Rangwala ,Charotar Publishing House , 2010 , Bridge Engineering, Rangwala ,Charotar Publishing House , 2009 , Estimating & Costing, Rangawala ,Charotar Publishing House , Latest Edition , Construction Of Structures And Management Of Works, Rangwala.S.C ,Charotar Publishing House , Latest Edition , Machine Design, Pandya & Shah ,Charotar Publishing House , 1995 , Principle Of Geographical Information Systems For Land Resources Assessment, Burrough P.A. (2000) ,Clarendon Press, Oxford. , Latest Edition , Technician’S Guide To Programmable Logic Controllers, Richard A. Cox ,Delmer , Sixth Edition 2011 , Principles Of The Manufacturing Of Composite Materials , Suong V Hoa, ,Des Tech Publication. Inc , Latest Edition , Strength Of Materials, S.Ramamirtham ,Dhanpat Rai , 2003 , A Course In Electrical And Electronics Measurements And Instrumentation., A.K. Sawhney Puneet Sawhney ,Dhanpat Rai , Latest Edition , Estimating & Costing, L.N.Dutta ,Dhanpat Rai , Latest Edition , Thermal Engineering., B.K. Sarkar. ,Dhanpat Rai , 3Rd Edition , Internal Combustion Engines, M.L.Mathur & R.P.Sharma ,Dhanpat Rai , Latest Edition , Mechanical Draughtsmanship,G.L. Tamta, Dhanpat Rai ,Dhanpat Rai , Latest Edition , Engineering Drawing, D.N. Ghose ,Dhanpat Rai , Latest Edition , A Course In Electrical Power, Soni & Gupta ,Dhanpat Rai , Latest Edition , Hydraulics,Fluid Mechanics And Hydraulics Machines, S. Ramamirtham ,Dhanpat Rai , Latest Edition , Modern Electric Traction, H Partab ,Dhanpat Rai , Latest Edition , Mechanical Measurements, A.K.Sawhney-Dhanpat Rai & Sons ,Dhanpat Rai , Latest Edition , Electronic Measurements And Instrumentation, Sanjay Talbar & Akhilesh Upadhyaya ,Dhanpat Rai , 2004 , Electrical And Electronic Measurements And Instrumentation, A.K.Sawheney ,Dhanpat Rai , 1993 , A Coursein Electricalpower, Soni, Gupta ,Dhanpat Rai , Latest Edition , Strength Of Materials, S. Ramamrutham ,Dhanpat Rai , 15 Edn 2004 , Course In Electrical Machine Design, A.K.Sawhney ,Dhanpat Rai , Latest Edition , Electrical Technology, B.L.Theraja ,Division Of Nirja Constructions And Dev Co.(P) Ltd , 1994 , Design Data Book, Psg College Of Technology ,Dpv Printers, Coimbatore , Latest Edition , Suftware Testing Concepts And Tools, Nageshwara Rao Pusulri ,Dreamteach , First Edition , Automotive Mechanics, Joseph Heitner ,East West Press (P) Ltd, New Delhi , Latest Edition , Renewableenergy Sources , Twidell, J.W. And Weir, ,Efn Spon Ltd , Latest Edition , Vehicle And Engine Technology, Heinz Heisler ,Elbs , Latest Edition , Programmable Logic Controller, W. Bolton ,Elsevier India Pvt Ltd , Iv Edition , Principles And Practice Of Town And Country Planning, Lewis B. Keeble ,Estates Gazette, University Of Michigan , 2010 , A Text Book On Building Services, R.Udyakumar ,Eswar Press, Chennai , Latest Edition , Fluid Mechanics, K.L.Kumar ,Eurasia Publshing House - New Delhi , Latest Edition , A Text Book Of Machine Design., R.S. Khurmi & J.K.Gupta ,Eurosia Publishing House - New Delhi ,Edn. 18 , Mechanical Measureme Control, R.V. Jalgaonk ,Everes T Publishing House, Pune , Latest Edition , The Cell Phone Handbook, P.J. Stetz And Penelope Stetz ,Findtech Ltd , Second Edition , Pc Repair And Maintenance, Joel Rosenthal ,Fire Wall Media, New Delhi , First Edition 2007 Reprint :2012 , Software Engineering, Bharat Bhusan Agarwal, Sumit Prakash Tayal ,Fire Wall Media, New Delhi , Second Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , Multimedia Technology & Applications,, David Hillman ,Galgotia Publications Pvt Ltd. , Latest Reprint , Repair And Seismic Strengthening Of Buildings - Guidelines, Is:13935 - 2002,,Guidelines, Is:13935 , 2002 , Automotive Mechanics, William H.Crouse And Donald .L. Anglin ,Hill Publishing Company Ltd, New Delhi , Latest Edition , Die Design Fundamentals, Paquin.J.R,,Industrial Press Inc , Latest Edition , Digital And Analog Communication System, B.P.Lathi .Zhi Ding ,International Oxford University Press , 4Th Edition , Mysql Bible, Steve Suehring ,John Wiley & Sons , 2002, Latest Reprint , Modern Production / Operations Management, E.S. Buffa And R.K. Sarin ,John Wiley & Sons , Latest Edition , Remote Sensing And Image Interpretation, Lillesand, T.M. & Kiefer R.W. (1998) ,John Wiley & Sons , Latest Edition , Ground Water Hydrology, David Keith Todd ,John Wiley & Sons , Latest Edition , Digital Communications, Simon Haykin ,John Wiley India Edition , Latest Edition , Cad/Cam, Mikell P.Groover ,Jr.Prentice Hall Of India Pvt., Ltd. , Latest Edition , A Course In Electrical Power, J.B. Gupta ,Kaison Publishing House , Reprint 2004 , Civil Estimating, Costing And Valuation,,Kalson Publishing House , Latest Edition , Machine Drawing, P.S. Gill ,Katsan Publishing House , Latest Edition , Analysis Of Structures – Vol 1, Vazirani & Ratwani ,Khanna Publishers , Latest Edition , Quantity Surveying & Valuation, N.A.Shaw ,Khanna Publishers , Latest Edition , Water Supply And Sanitary Engineering, S.K.Garg ,Khanna Publishers , Latest Edition , Hydrology And Water Resources Engineering, Santhosh Kumar Gar ,Khanna Publishers , Latest Edition , Fluid Mechanics, Prof. S. Nagarathinam - ,Khanna Publishers , Latest Edition , Workshop Technology ,Raghuwanshi,Khanna Publishers , Latest Edition , Production Technology,Nai Sarak ,Khanna Publishers ,Edn. Xii , Thermal Engineering, P.Lballaney ,Khanna Publishers , 24Th Edition , Production Technology, Jain & Gupta ,Khanna Publishers , Latest Edition , Automobile Engineering, G.B.S.Narang ,Khanna Publishers , Latest Edition , Thermal Engineering, P.L Ballaney,Khanna Publishers , 24Th Edition , Applied Thermodynamics, Domkundwar And C.Pkothandaraman ,Khanna Publishers ,2Nd Edition , Non Conventional Energy Sources, G.D. Rai,Khanna Publishers , 1999 , Industrial Engineering And Management, O.P. Khanna ,Khanna Publishers , Latest Edition , Refrigeration And Air Conditioning, P.L . Ballaney ,Khanna Publishers , Latest Edition , Electric Circuit Theory, Dr.M.Arumugam Dr.N.Premkumaran ,Khanna Publishers , Latest Edition , Electrical Power, S.L Uppal ,Khanna Publishers , Latest Edition , Electrical Wiring, Estimating And Costing, Dr.S.L.Uppal G.C. Garg ,Khanna Publishers , Sixth- 2011 , Electric Circuit Theory, M. Arumugam, N. Premkumaran ,Khanna Publishers , 1997 , Power Electronics, P.S.Bimbhra, ,Khanna Publishers , 5Th Edition 1994 , Integrated Circuits, K.R. Botkar ,Khanna Publishers , Latest Edition , Satellite Communication, D.C. Agarwal ,Khanna Publishers , Third Edition , A Monograph On Electronic S Design Principles,, N.C.Goyel, R.K.Khetan, ,Khanna Publishers , Second Edition , Operating Systems, Ekta Walia ,Khanna Publishers , 2Nd Edition , Data Structures, Rs Salaria ,Khanna Publishers , 2016 , Electric Power, Sl Uppal ,Khanna Publishers , Latest Edition , Testing, Commissioning, Operation And Maintenance Of Electrical Equipments, S.Rao ,Khanna Publishers , Sixth Edition, 2010 , Electrical Estimation And Costing, Surjit Singh ,Khanna Publishers , Latest Edition , Power Electronics, Dr.P.S.Bimbhra ,Khanna Publishers , Fourth Edition, 2011. , Mechanical & Indtrial Measuments, R.K.Jain ,Khanna Publishers , Latest Edition , Construction Management, Sanga Reddy. S ,Kumaran Publications, Coimbatore , Latest Edition , Fluid Mechanics, R.K. Bansal ,Lakshmi Publications , Latest Edition , Total Quality Management,, V.Jayakumar ,Lakshmi Publications. , (Reprint 2005) , Thermal Enggi., R.K . Rajput,Laxmi Publications Pvt Ltd , 8Th Edition , Fluid Mechanics And Hydraulic Machines, R. K. Bansal ,Laxmi Publications Pvt Ltd , Latest Edition , Engineering Mechanics, R K Bansa ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Dr. B.C. Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Ashokkumar Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume I, Punmia.B.C. Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , 2011 , Theory Of Structures, B.C. Punmia, Ashok Jain & Arun Jain ,Laxmi Publications Pvt.Ltd. , 9Th Edition , Surveying Volume I, Punmia.B.C, Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume Ii & Iii, Punmia.B.C, Ashok Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Limit State Design Of Reinforced Concrete, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , R C C Designs, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Environmental Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Waste Water Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Soil Mechanics And Foundation Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Project Planning And Control With Pert And Cpm, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Buildingconstruction, Dr.B.C.Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Strength Of Materials, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 3Rd Edition, 2010. , Engineering Mechanics, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 2Nd Edition, 2007 , Thermal Engg, R.K .Rajput ,Laxmi Publications Pvt Ltd , 8Th Edition , Industrial Robotics – Technology, Programming And Applications, P.Groover ,Mc Graw Hill , 2001 , Mobile Cellular Communications, W.C.Y. Lee ,Mc Graw Hill , Second Edition , Electronic Principles And Applications, Charles.A.Schuler ,Mc Graw Hill , 3Rd Edition, 1989 , Geotechnical Earthquake Engineering Hand Book, Robert W.Day ,Mc Graw Hill , Latest Edition , Measurement Systems Application And Design, Ernest O. Doebelin ,Mc Graw Hill , 2004 , Transducers And Instrumentation, D.V.S.Murty ,Mc Graw Hill , 2004 , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , Latest Edition , Digital Integrated Electronics, Taub & Schlling ,Mc Graw Hill , Latest Edition , Optical Fibre Communication, Gerd Keiser ,Mc Graw Hill , Third Edition , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , 1994 , Computer Control Of Manufacturing Systems, Yoram Koren ,Mc Graw Hill , Latest Edition , Engineering Economics And Management, T.R. Banga & S.C. Sharma ,Mc Graw Hill , Editiion 2 – 2001 , Database System Concepts, Silberschatz A. And Korth H ,Mcgraw Hill Education (India) Pvt Limited , 6Th Edition , A Global Perspective, Heinz Weihrich, Harold Koontz ,Mcgraw Hill International Edition ,10Th Edition , Hessentials Of Management’, Herald Koontz And Heinz Weihrich ,Mcgraw Hill Publishing Company , Latest Edition , Power Electronics, Md Singh, Kb Dhanchandaniata ,Mcgraw Hill Publishing Company , Seventeenth Reprint 2005 , Operating Systems, A Concept-Based Approach, Dhananjay M. Dhamdhere ,Mcgraw Hill, Indian Edition , 3Rd Edition , Elements Of Photogrammetry, Wolf Paul (1998) ,Mcgraw Hill, New Delhi , Latest Edition , Manufacturing Process, Begeman . ,Mcgraw Hill, New Delhi1981. , 5Th Edition , Introduction To Environmental Engineering, Mackenzie, L. Davis And A. David, Cornwell. ,Mcgrawhill , Latest Edition , Environmental Engineering, Peary, Rowe And Tchobanoglous ,Mcgrawhill , Latest Edition , Fundamentals Of Digital Logic With Vhdl Design, Stephen Brown And Vranesic ,Mcgrawhill , Latest Edition , Programmable Logic Handbook: Pld, Cpld, And Fpga, Ashok K.Sharma ,Mcgraw-Hill , Latest Edition , Javascript: The Complete Reference, Powell, Thomas ,Mc-Grawhill , 3Rd Edition , Html & Css: The Complete Reference, Thomas Powell ,Mc-Grawhill , 5Th Edition , Jsp: The Complete Reference, Phil Hanna ,Mc-Grawhill , 2Nd Edition , Robotics For Engineers, Yoram Koren ,Mcgraw-Hill Book Co., , 1992 , “Basic Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Advanced Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Hand Book Of Die Design, Ivana Suchy ,Mcgraw-Hill Book Company , Latest Edition , Tool Engineers Hand Book, Astme ,Mcgraw-Hill Book Company , Latest Edition , Robotics Control, Sensing, Vision And Intelligence, Fu.K.S.Gonzalz.R.C., And Lee C.S.G ,Mcgraw-Hill Book Company , 1987 , Audio And Video System – Principles, Maintenance And Troubleshooting , R.Gupta. ,Mcgraw-Hill Book Company ,Second Edition , Computer Organization, V.Carl Hamacher, Zvonko G.Vransic, Safgat G.Zaky ,Mcgraw-Hill Book Company , 5Th Edition , Elements Of Workshop Technology Volume I & Ii, Hajra Chowdry & Bhattacharaya,Media Promoters & Publishers , Latest Edition , Operation And Maintenance Of Electrical Equipment – Volume I & Ii, B.V.S.Rao ,Media Promoters & Publishers , 1St Edition, 1St Reprint 2011 , Elements Of Workshop Technology- Vol. I & Ii,Hajra Choudry & Battacharya ,Media Promoters & Publishers , Latest Edition , Hydraulic Machines, Jagadishlal, ,Metropolitan Book Company New Delhi , Latest Edition , Fluid Mechanics And Hydraulic Machines, Dr. Jagadish Lal ,Metropolitan Book Company New Delhi , Latest Edition , Mechanical Measurements &Control, D.S.Kumar ,Metropolitan Book Company New Delhi , Latest Edition , Introducing Microsoft .Net, David S.Platt ,Microsoft Press , 3Rd Edition , Computer Organization And Design, David A. Patterson And John L. Hennessey ,Morgan Kauffman / Elsevier , 5Th Edition , Complete Knowledge In C, Sukhendu Dey, Debobrata Dutta ,Narosa Publishing House, New Delhi , Reprint 2013 Or Latest Reprint , Software Testing, K.Mustafa And R.A.Khan ,Narosa Publishing House, New Delhi , Reprint 2009 , Software Quality, R.A. Khan, K.Mustafa And Si ,Narosa Publishing House, New Delhi , Reprint 2008 , Building Materials, S.K.Dugga ,New Age International (P) Ltd , 2003 , Reinforced Concrete Design, N Krishnaraju ,New Age International (P) Ltd , Latest Edition , Design Of R C C And Structural Elements ( Rcc Vol I), S S Bhavikatti, ,New Age International (P) Ltd , Latest Edition , G I S Basics, Shahab Fazal ,New Age International (P) Ltd , Latest Edition , Irrigation And Water Resources Engineering, G.L.Asawa ,New Age International (P) Ltd , Latest Edition , Basic Geotechnical Earthquake Engineering,,New Age International (P) Ltd , Latest Edition , Maintenance Of Buildings, A C Panchdhar ,New Age International (P) Ltd , Latest Edition , Engineeringdrawing And Graphics + Autoca, K.Venugopal, ,New Age International (P) Ltd , Latest Edition , Control Of Machines, S.K Bhattacharya ,New Age International (P) Ltd , Second Edition- Reprint 2010 , Quality Manageme, Narayana.V And Sreeniva N.S ,New Age International (P) Ltd , 1996 , Cad/Cam/Cim, R.Radhakrishnan, S.Subramanian ,New Age International (P) Ltd , Latest Edition , Electrical Power System, Clwadhawa ,New Age International (P) Ltd , Fourth Edition, 2009 , Hvdc Power Transmission System & Technology, Kr. Padiyar ,New Age International (P) Ltd , Reprint 2005 , Digital Protection – Protective Relaying From Electromechanical To Microprocessor, Lp Singh ,New Age International (P) Ltd , Second Edition 1997 , Electrical Design Estimating And Costing, K.B.Raina& S.K.Battacharya ,New Age International (P) Ltd , Reprint - 2011 , Control Of Electrical Machines., S.K. Bhattacharya ,New Age International (P) Ltd , Latest Edition , Power Electronics, Mohammed H.Rashid ,New Age International (P) Ltd , Third Edition,2004 , Programming In C, D.Ravichandran ,New Age International (P) Ltd , 1St Edition 1996, Latest Reprint , Linear Integrated Circuits, D.Roychoudhury & Shail.B. Jain ,New Age International (P) Ltd , 2Nd Edition, 2004. , Modern Television Practice– Transmission, Reception, Applications, R.R.Gulati,New Age International (P) Ltd , 5Th Edition , Monochrome & Color Tv , R.R.Gulati ,New Age International (P) Ltd , Latest Edition , Computer Fundamentals Architecture And Organization, B. Ram ,New Age International (P) Ltd , 5Th Edition , Principles Of Data Structures Using C And C++, Vinu V.Das ,New Age International (P) Ltd , Latest Reprint , Practical Scada For Industry, David Bailey Edwin Wright ,Newness , Latest Edition , Programmable Logic Controllers, W. Bolton ,Newness , Latest Edition , Practical C Programming, Steve Oualline ,O’Reilly , 3Rd Edition , Programming Php, Rasmus Lerdorf And Kevin Tatroe ,O’Reilly Publications , 3Rd Edition , Java, A Beginners Guide, Herbert Schildt ,Oracle Press , 6Th Edition , Pc Hardware In A Nutshell, Robert Bruce Thompson. ,Oreilly Media , Third Indian Reprint 2008. , Principles Of Electrical Machine Design, S.K.Sen ,Oxford & Ibh , Latest Edition , Principles Of Gis For Land Resources Assessment, Burrough P A ,Oxford Publication , Latest Edition , Programming In C, Reema Thereja ,Oxford University Press , 2Nd Edition , Digital Electronics, G.K.Kharate ,Oxford University Press , 2010 , Software Engineering Concepts And Application, Subhasjit Dattun ,Oxford University Press , 2010 , Software Engineering Fundamentals, Ali Behforooz And Fredick J Hudson ,Oxford University Press , 2005 , Reinforced Cement Concrete, Mallick And Rangasamy ,Oxford & Ibh , Latest Edition , Digital Communications Fundamentals And Applications, Bernard Sklar & Pabitra Kumar Ray ,Pearson Education , Latest Edition , Advanced Surveying, Sathesh Gopi, R.Sathikumar & N.Madhu ,Pearson Education , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C , Mazidi,Mazidi And D.Mackinlay,,Pearson Education , Latest Edition , Programmable Logic Controllers – Programming Methods And Applications, John R Hackworth And Fredrick D.Hackworth ,Pearson Education , Latest Edition , Principles Of Wireless Networks– A Unified Approach, Kaveh Pahlavan And Prashant Krishnamoorthy ,Pearson Education , 2002 , Electronic Communications Systems - Fundamentals Through Advanced, Wayne Tomasi ,Pearson Education , Fifth Edition , Digital Design, M.Morris Mano Michael D Ciletti ,Pearson Education , Latest Edition , 8051 Microcontrollers, Mazidi And D.Mackinlay ,Pearson Education , Latest Edition , Principles Of Wireless Networks – A Unified Approach, Kaveh Pahlavan And Prashant Krishnamurty ,Pearson Education , Latest Edition , Wireless Communications Principles And Practice, Theodore S. Rappaport ,Pearson Education , Latest Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Second Edition , Mobile Cellular Communication, Gottapu Sasibhushana Rao ,Pearson Education , Latest Edition , Operating System, Internal And Design Principles, William Stallings ,Pearson Education , 9Th Edition , Operating Systems, Deitel And Deitel ,Pearson Education , 3Rd Edition , Computer Organization And Architecture Designing For Performance, William Stallings ,Pearson Education , 10Thedition , Network Security Essentials, William Stallings ,Pearson Education , 5Th Edition , Cryptography And Network Security, William Stallings ,Pearson Education , 6Th Edition , Computer Networks, Andrew S.Tanenbaum ,Pearson Education , 5Th Edition , Web Development And Design Foundations With Html5, Terry Felke-Morris ,Pearson Education , 8Th Edition , Software Engineering, Ian Sommerville ,Pearson Education , Sixth Edition , Software Testing Principles And Practices, Srnivasan Desikan, Gopalswamy Ramesh ,Pearson Education , First Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Latest Edition , Fundamental Of Multimedia, Ze- Nian Li And M.S.Drew. ,Pearson Education , 2Nd Edition , Multimedia Computing, Communication And Applications, Ralf Steinmetz And Klara Nahrstedt ,Pearson Education , Latest Reprint , Multimedia Systems, John F. Koegel Buford ,Pearson Education , Latest Reprint , Total Quality Management, Date H.Besterfiled ,Pearson Education Asia. , Latest Edition , Automation, Production Systems, And Computer-Integrated Manufacturing, Mikell P. Groover ,Pearson Education Asia. , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C, Mazidi,Mazidi And D.Mackinlay ,Pearson Education Low Price Edition. , Latest Edition , Design Of Steel Structures, K.S.Sai Ram ,Pearson-Porling Kindersley Pvt Ltd , Latest Edition , 8051 Microcontroller, Kenneth Ayala ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Plc And Industrial Automation An Introduction, Madhuchhanda Mitraand Samarjit Sen Gupta ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Industrial Energy Conservation-, D. A. Ray- ,Pergaman Press , Latest Edition , Electronics Devices And Circuit Theory, Boyestad & Nashelsky ,Phi , Latest Edition , Electronic Devices & Circuits An Introduction, Allen Mottershed,Phi , Latest Edition , Computer Graphics Multimedia And Animation,, Malay K. Pakhira ,Phi , 2Nd Edition , Principles Of Digital Electronics, K.Meena ,Phi , 2011 , Operational Amplifiers And Linear Integrated Circuits, Robert F. Coughlin Frederick F. Driscoll ,Phi , 1992 , Op. Amp & Linear Integrated Circuits, Ramakant. A. Gayakwad ,Phi , 1992 , Digital Electronics- An Introduction To Theory And Practice, William H.Gothmann ,Phi , 1998 , Transducers And Instrumentation, Dvs Murty ,Phi , 2009 , Measurement And Instrumentation, Arun. K ,Phi , 2010 , Sensor And Transducers, D. Patranabis ,Phi , 2011 , Elements Of Engineering Mechanics, Sanchayan Mukherjee ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass, ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Limit State Design Of Reinforced Concrete, P C Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, .M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Principles Of Environmental Science And Engineering,, P.Venugopala Rao ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Irrigation And Water Power Engineering, Madan Mohan Das&Mimi Das Saikia ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Buildingconstruction, P.C.Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Energy Engineering And Management, Amlan Chakrabarti ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Power Electronics, M.S.Jamil Asghar ,Phi Learning Pvt. Ltd., New Delhi. , Eastern Economy Edition, 2010 , Principles Of Digital Electronics, K.Meena ,Phi Learning Pvt. Ltd., New Delhi. , 2009 , Operating System, Principles & Design, Pabitra Pal Chaudhuri ,Phi Learning Pvt. Ltd., New Delhi. , 1St Edition , Computer Organization & Architecture, Rajaraman ,Phi Learning Pvt. Ltd., New Delhi. , Latest Reprint , Fundamentals Of Software Engineering, Rajib Mall ,Phi Learning Pvt. Ltd., New Delhi. , 28Th Printing – August 2011 , A Textbook On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Electronics Devices And Circuit Theory , Boyestad & Nashelsky ,Phi Publication, New Delhi , 2009 , Electronicsdevices And Circuits, Allen Mottershed ,Phi Publication, New Delhi , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D.Helfrick And Willam David Cooper ,Phi Publication, New Delhi , 1996 , A Text Book On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Power Electronics, M.H.Rashid ,Phi Publication, New Delhi , 3Rd Edition-2005 , Industrial Electronics And Control, Biswanath Paul ,Phi Publication, New Delhi , 2Nd Edition -2010 , Programmable Logic Controllers, Frank D.Petruzela ,Phi Publication, New Delhi , 2Nd Edition- 1998 , Programmable Logic Controllers Principles And Applications, John W. Webb. Ronald A. Reis ,Phi Publication, New Delhi , Latest Edition , Networks Lines And Fields, John D.Ryder ,Phi Publication, New Delhi , Latest Edition , Electronic Communication, Dennis Roddy And John Colen ,Phi Publication, New Delhi , Latest Edition , Principles Of Digital Electronics, K.Meena ,Phi Publication, New Delhi , Latest Edition , Digital Electronics, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Digital Electronics – An Introduction To Theory And Practice, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Ramakant A Gayakwad ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Robert F.Coughlin And Frederick F.Driscoll ,Phi Publication, New Delhi , Latest Edition , Microcontrollers, Principles And Applications, Ajit Pal ,Phi Publication, New Delhi , Latest Edition , Vhdl Primer, Bhasker J ,Phi Publication, New Delhi , Latest Edition , Digital Electronics With Pld Integration, Nigel P. Cook ,Phi Publication, New Delhi , Latest Edition , Digital Logic Simulation And Cpld Programming With Vhdl, Steve Waterman ,Phi Publication, New Delhi , Latest Edition , Data And Computer Communications, William Stallings ,Phi Publication, New Delhi , Latest Edition , Computer Networks , Andrew S.Tanenbaum ,Phi Publication, New Delhi , Latest Edition , Wireless Digital Communications, Kamilo Feher ,Phi Publication, New Delhi , Latest Edition , Wireless Communications And Networks, William Stallings ,Phi Publication, New Delhi , Latest Edition , Irrigation Water Management, Dilip Kumar Majumdar ,Phi Publication, New Delhi , Latest Edition , Multimedia Systems Design., Prabhat K.Andleigh, Kiran Thakra ,Phi Publication, New Delhi , Latest Edition , Performance And Design Of Ac Machines, M.G.Say ,Pitman Publishing Ltd , Latest Edition , Principles Of Management, M.Govindarajan And S.Natarajan ,Prentice-Hall Of India (P) Ltd , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D. Helfrick William David Cooper ,Prentice-Hall Of India (P) Ltd , Latest Edition , Building Materials, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Building Constructions, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Geographic Information Systems, Lo & Yeung (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Geographic Information Systems & Environmental Modelling, Clarke Parks & Crane (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Foundation Design, Wayne C.Teng ,Prentice-Hall Of India (P) Ltd , Latest Edition , Operations Research, H.A.Taha ,Prentice-Hall Of India (P) Ltd , Latest Edition , Total Quality Management – An Introductory Text, Paul James ,Prentice-Hall Of India (P) Ltd , Latest Edition , Electronic Device And Circuits- An Introduction, Allen Mottershed,Prentice-Hall Of India (P) Ltd , Latest Edition , Techniques Of Press Working Sheet Metal, Donald F. Eary. & Edward A. Reed ,Prentice-Hall Of India (P) Ltd , Latest Edition , Essentials Of Management, Joseph L.Massie ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Elements Of Electrical Engineering, Maria Louis ,Prentice-Hall Of India (P) Ltd , Latest Edition , Digital Electronics, William H.Gothmann ,Prentice-Hall Of India (P) Ltd , Latest Edition , Programmable Logic Controllers – Principle And Applications, John W. Webb ,Prentice-Hall Of India (P) Ltd , Latest Edition , Computer Networks, Andrew S.Tanenbaum ,Prentice-Hall Of India (P) Ltd , 2002 , Data And Computer Communications, William Stallings ,Prentice-Hall Of India (P) Ltd , Eighth Edition 2007 , Computer System Architecture, M.Morris Mano ,Prentice-Hall Of India (P) Ltd , 3Rd Edition , Data Structures A Programming Approach With C, Dharmender Singh Kushwaha And Arun Kumar Misra ,Prentice-Hall Of India (P) Ltd , 2012, Latest Reprint , Classic Data Structures, Debasis Samanta ,Prentice-Hall Of India (P) Ltd , 2Nd Edition , The Internet, Douglas E.Comer ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Introduction To Biomedical Instrumentation, Mandeep Singh,Prentice-Hall Of India (P) Ltd , Latest Edition , Iso 9001, Brain Rethry, Brain Rethry ,Productivity And Quality Publishing Pvt. Ltd. , 1993 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 2008 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 23Rd Edition , Limit State Theory And Design Of Reinforced Concrete, S.R.Karve And V.L.Shah ,Puna Vidyarthi Griha, Prakashan , 5Th Edition , A Course In Electrical And Electronics Measurements And Instrumentation, A.K. Sawhney ,Puneet Sawhney Dhanpat Rai & Co (P) Ltd. , Latest Edition , Upgrading And Repairing Laptops, Scott Mueller ,Que Publication , Latest Edition , A Text Book Of Fluid Mechanics And Hydraulic Machines,By, R. K Rajput And S.Chand ,R. K Rajput And S.Chand & Co, New Delhi , Latest Edition , Training Manual On Iso 9001 : 2000 & Tqm, Girdhar J.Gyani ,Raj Publishing House , Latest Edition , Electrical Machine Design, A.Naoor Kani ,Rba Publications , Latest Edition , A Course In Electrical Engineering , B.L.Theraja ,S.Chand & Company Ltd, New Delhi ,Reprint 2006 , A Text Book Of Transportation Engineering, S P Chandola ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R.S.Khurmi ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R. S. Khurmi, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Production Technology , P. C. Sharma ,S.Chand & Company Ltd, New Delhi ,Edn. X , Thermal Engineerin, , R.S. Khurmi, J.K Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , A Text Book Of Hydraulics, Fluid Mechanics And Hydraulic Machines,R.S. Khurmi ,S.Chand & Company Ltd, New Delhi ,Edn.18 , Thermal Engineering, R.S. Khurmi And J.K. Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , The Automobile, Harbans Singh Reyat, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Non Conventional Energy Sources And Utilisation , R.K. Rajput - S.Chand ,S.Chand & Company Ltd, New Delhi , 2012 , A Text Book Of Electrical Technology Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , A Text Book Of Electrical Technology -Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , Principles Of Power System, V.K.Metha ,S.Chand & Company Ltd, New Delhi , 4Th Edition Reprint 2007 , Electronic Measurements And Instrumentation, R.K.Rajput ,S.Chand & Company Ltd, New Delhi , 3Rd Edition 2009 , Computer Concepts And C, Dr.S.S.Khandare ,S.Chand & Company Ltd, New Delhi , 1St Edition 2010, Latest Reprint , Electrical Technology Vol I And Ii, B.L.Theraja ,S.Chand & Company Ltd, New Delhi , Mutiple Colour Edition,2012 , Principles Of Electronics, V.K.Mehta ,S.Chand & Company Ltd, New Delhi , Second Edition , Electronics And Instrumentation, Dr.S.K.Battachariya Dr. Renu Vig ,S.K. Kataria & Sons, New Delhi , Latest Edition , Principles Of Electrical Machine Design, R.K.Agarwal ,S.K. Kataria & Sons, New Delhi , Latest Edition , Environmental Engineering And Management, Dr.Suresh K.Dhameja- ,S.K. Kataria & Sons, New Delhi , Latest Edition , Soil Mechanics & Foundation Engineering, V N S Murthy ,Sai Kripa Technical Consultants , Latest Edition , Digital Communications, Dr.K.N.Hari Bhat Dr.D.Ganesh Rao ,Sanguine Technical Publisher , Latest Edition , Energy Resource Management, Kirpal Singh Jogi- Sarup And Sons ,Sarup And Sons , Latest Edition , A Course In Electrical And Electronic Measurement And Instrumentation, Umesh Sinha ,Satya Prakashan, New Delhi , Latest Edition , Electrical And Electronics Measurements And Instrumentation, Umesh Sinha ,Satyaprakashan Tech , 1992 , Theory And Problems Of Machine Design, Holowenko, Laughlin ,Schaum’S Outline Series. , Latest Edition , Data Structures With C, Seymour Lipschutz ,Schaums Outlines, Tmh , Latest Reprint , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication , Latest Edition , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication, Chennai. , Latest Edition , Limit State Design Of Concrete Structures, Dr.S.Ramachandra ,Scientific Publishers , Latest Edition , Murach’S Mysql, Joel Murach ,Shroff / Murach , 2012, Latest Reprint , Fundamentals Of Tool Design, Dr.John G.Nee ,Society Of Manufacturing Engineers. , Latest Edition , Electrical Machine Design, C.Eswarlal ,Sonaversity , Latest Edition , A Concise Introduction To Software Engineering, Pankaj Jalote ,Springer, Latest Edition , Design Of Electrical Machine, Mittle V.N ,Standard Book – House , Latest Edition , Fluid Mechanics, P.N. Modi & S.M. Sethi ,Standard Publishers & Distributors, New Delhi , Latest Edition , Water Supply And Sanitary Engineering Vol I & Ii, Gurcharan Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Hydraulics, Fluid Mechanics And Hydraulics Machines, K.R. Arora ,Standard Publishers & Distributors, New Delhi , Latest Edition , Automobile Engineering Vol- 1, Vol – 2,Kirpal Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Learning Material Development Project,,Taramani, Chennai, Cd Programme On Gps And Gis , Latest Edition , Principles Of Transportation & Highway Engineering, G V Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, N.N. Basak ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, A.Kamala,D.L.Kanthrao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Engineering Hydrology, K.Subramanya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Production And Operations Management, S.N. Chary ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Essentials Of Management, Koontz &Weihrich ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Business Correspondence & Report Writing, R.C. Sharma And K.Mohan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , How To Prepare For Group Discussion & Interview (With Audio Cassette), Prasad ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Construction Management And Planning, Sengupta.B, &H.Guha ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Applications In Construction, Boyd.C. & Paulson Jr ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Fluid Mechanics And Machinery, B C S Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Geotechnical Earthquakes Engineering Hand Book,,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials, S.S.Rattan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials,B K Sarkar ,Tata Mcgraw-Hill Publishing Company Ltd , I Edition, 2003 , Production Technology,,Tata Mcgraw-Hill Publishing Company Ltd ,Edn. 18. 2001 , Autocad With Applications, Sham Tickoo,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynami, Pk Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , Production Technology, Hmt, ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 18 , Manufacturing Process, Myro N Begman ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 5 , Production Processes, Nitttr, ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Circuits & System- Analog And Digital , Y.N.Bapat ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynamics, P.K. Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Ndedition , Quality Management, Howard Cuitlow ,Tata Mcgraw-Hill Publishing Company Ltd , 1998 , Quality Planning And Analysis, Juran J.M And Frank M.Gryna Jr. ,Tata Mcgraw-Hill Publishing Company Ltd , 1982 , Tool Design, Donaldson ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Non-Conventional Energy Resources ,B.H.Khan ,Tata Mcgraw-Hill Publishing Company Ltd ,2Nd Edn, 2009. , Cad/Cam Principles And Applications, Dr.P.N.Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cad/Cam, Ibrahim Zeid ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Measurement Systems, E. O. Doebelin ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Robotics And Image Processing, Janakiraman.P.A ,Tata Mcgraw-Hill Publishing Company Ltd , 1995 , Circuits And Networks Analysis And Synthesis., A. Sudhakar Shyammohan S Palli ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electric Circuits, Mahamood Nahvi Joseph A Edminister ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Nagarath ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Bhattacharya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Jacob Millman And Halkias ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Optical Fiber Communication, Gerdkeise ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Instrumentation, Hs Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P.Jains ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles & Applications, Albert Paul Malvino & Donaldp.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Introduction To Microprocessor, Aditya P Mathur ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Power System Protection And Switchgear, B Ram & Dn Viswakarma ,Tata Mcgraw-Hill Publishing Company Ltd , Reprint 2000 , Programmable Logic Controllers, Frank D.Petruzella ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Power Distribution System, As Pabla ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Utilization Of Electric Power, Nv Suryanarayana ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Troubleshooting, Maintaining And Repairing Pcs, Stephen J Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , 2006 , Computer Networks, Achyut Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices And Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2016 , Electronic Principles , Malvino ,Tata Mcgraw-Hill Publishing Company Ltd , 2010 , Electronicsdevices And Circuits, Jacobmillmanandhalkias ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2010 , Electronic Instrumentation, Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Programming In Ansi C , E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Programming And Problem Solving Using C, Isrd Group, Lucknow ,Tata Mcgraw-Hill Publishing Company Ltd , 2008 , Electronic Communication Systems, Kennedy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, Arvind M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Communication Electronics Principles And Application , Louis E Frenzel ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles And Applications, Albert Paul Malvino & Donald P.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Linear Integrated Circuits, Salivahanan & V.S.Kanchana Baskaran ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Communication Systems, Kennedy – Davis ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Communication, P.Ramakrishna Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Principles Of Communications System, Taub &Schilling ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Tata Mcgraw-Hill Publishing Company Ltd , Second Edition 2010 , Troubleshooting, Maintaining And Repairing Pcs, Stephen J.Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , Fifth Edition , Ibm Pc And Clones, B.Govindrajalu ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, By A.M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Color Tv, Theory And Practice, S.P.Bali ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P. Jain ,Tata Mcgraw-Hill Publishing Company Ltd , Third Reprint 2010 , Basic Electricall Engineering, V.N.Mittle ,Tata Mcgraw-Hill Publishing Company Ltd , First Edition , Basic Electrical And Electronics Engineering, R,Muthusubramanian R.Salivajanan ,Tata Mcgraw-Hill Publishing Company Ltd , Seventh Reprint 2011 , Computer Architecture And Organization, John P. Hayes ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Data Communication And Networking, Behrouz A.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Computer Communications And Networks, Achyuts.Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cryptography And Network Security, Behrouza.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Programming With Java, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Data Structures And Algorithms, G.A.Vijayalakshm I Pai ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Reprint Or Latest Reprint , Data Structures Using C, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Programming In C#, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Applications Of .Net Technology, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , 1St Edition Or Latest Reprint , Cloud Computing A Practical Approach 2008 Edition, Cloud Computing A Practical Approach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Software Engineering, Stephen Schach ,Tata Mcgraw-Hill Publishing Company Ltd , Eight Reprint 2011 , Mobile Computing, Asoke K Talukder,Hasan Ahmed, Roopa R Yavagal ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Multimedia: Making It Work., Tay Vaughan ,Tata Mcgraw-Hill Publishing Company Ltd , 8Th Edition , Multimedia Communication Systems: Techniques, Standards, And Networks, K.R. Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Principles Of Multimedia, Ranjan Parekh ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , The Complete Reference Linux, Richard Peterson ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Edition , A Text Book Of Engineering Drawing,R.B. Gupta ,Technical India Publications, New Delhi , Latest Edition , Digital Communication, Dr. J.S.Chitode ,Technical Publications – Pune , Latest Edition , Introduction To Plc, Gary Dunning ,Thomson Del Mar Learning , 3Rd Edition , Data Structures Using C – 1000 Problems And Solutions, Sudipta Mukherjee ,Tmgh, New Delhi , 2Nd Reprint Or Latest Reprint , Industrial & Power Electronics, Harish C.Rai ,Umesh Publications , 2017 , Construction Engineering & Management, Seetharaman. S ,Umesh Publications , Latest Edition , Introduction To Earthquake Engineering,,University Of Tokyo Press , Latest Edition , Digital Electronics And Logic Design, Jaydeep Chakravarthy ,University Press, Hyderabad , First Edition2012 , Introduction To Data Structures Using C, Venkatesh N.Baitipuli ,University Science Press, Chennai , 1St Edition, 2009 Or Latest Reprint , Software Engineering, Rohit Khurana ,Vikas Publishing Ltd , Second Edition , Organizational Behaviours, S.Chandran ,Vikas Publishing Ltd , Latest Edition , Operating Systems, Rohit Khurana ,Vikas Publishing Ltd , 2Nd Edition , Workshop Technology, Waj Chapman ,Vima Books Pvt. Ltd New Delhi , Latest Edition , Energy Auditing In Electrical Utilities, Rajiv Shankar ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Workshop Tech Vol I,Ii, Iii, Waj. Chapman ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Wireless And Mobile Network Architectures, Yi-Binglin, Imrich Chlamtac ,Wiley , Latest Edition , Wireless Networks, P. Nicopolitidis ,Wiley , Latest Edition , Operating System Concepts, Abraham Siberschatz, Galvin, Gagne ,Wiley , 9Th Edition , Microprocessor Architecture Programming And Application, Ramesh S. Gaonkar, ,Wiley Eastern Ltd , Latest Edition , Introduction To System Design Using Ic, B.S. Sonde ,Wiley Eastern Ltd , Latest Edition , Fundamentals Of Acoustics, Kingsler And Frey,Wiley Eastern Ltd , Latest Edition , Beginning Android 4 Application Development, Wei-Meng Lee ,Wiley India Edition , Latest Edition , Power Electronics, Mohan, Undeland, Robbins. ,Wiley India Edition. , Media Enhanced Third Edition , Web Programming, Chris Bates ,Wiley India, New Delhi, 3Rd Edition , Cloud Security: A Comprehensive Guide To Secure Cloud Computing, Ronald L. Krutz Russell Dean Vines ,Wiley Publishing, Inc , Latest Edition , Cloud Computing Bible, Barrie Sosinsky ,Wiley Publishing, Inc. , Latest Edition , Total Quality Management For Engineers, Zeiri ,Wood Head Publishers , 1991 , Mechanics Of Structures- Vol 1, S.B.Junnarkar , , Latest Edition , I S 2185 Part I & Ii, Ernest O. Doebelin , , Latest Edition , Pwd & Cpwd Specifications, D.V.S.Murty , , Latest Edition , National Building Code,, , Nbc-2012 , Tamilnadu District Municipal Building Rules And By-Laws,, , Latest Edition , Civil Engineering Drawing And House Planning, B.P. Verma , , Latest Edition , Building Planning And Drawings, Dr N. Kumaraswamy And A. Kameswara Rao , , Latest Edition , Building Planning And Construction, G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , , Latest Edition , Civil Engineering Drawing, S.C.Rangwala , , Latest Edition , A Guide To Civil Engineering Drawing, V.R.Thothathri , , Latest Edition , Theory Of Structures, S. Ramamrutham , , Latest Edition , Analysis Of Structures, V.N. Vazirani & M.M. Ratwani , , Latest Edition , Elementary Theory Of Structures, R.L. Jindal , , Latest Edition , Strength Of Materials, Fv. Warnock , , Latest Edition , Estimating & Costing, Bridie , , Latest Edition , Indian Standard Code Of Practice, Is:1200,, , Latest Edition , I S 456-2000 ; I S 875-1987; I S 800 -2007,, , Latest Edition , Explanatory Hand Book Sp24, Design Aid Sp 16,Detailing Of Reinforcement,Sp 34,, , Latest Edition , Concrete Technology , M.S. Shetty , , Latest Edition , Fire Resistant Construction – Building Construction, S.P.Arora And S.P.Bindra , , Second Edition , Earth Quake Proof , Dr.Janardhanjha And Prof.Suresh Kumar , , Latest Edition , Sinha Is Code Of Practice For Earth Quake , Is Code Of Practice For Fire Resistance, Is Code Of Practice For Pre Stressing,, , Latest Edition , Pile Foundation, Rd Chellis, Mis , , Latest Edition , Construction And Foundation Engineering, Sinha & Janatha Shau , , Latest Edition , Principle Fine Safety Standards For Building Construction, M.Ya Roytman , , Second Edition , Remote Sensing And Geographical Information Systems, Anji Reddy.M. (1998) , , Latest Edition , Analysis And Design Of Substructures (Lsd) – Second Edition 2010, Swami Saran , , Latest Edition , Civil Engineering Drawing, M Chakrabort , , Latest Edition , Civil Engineering Drawing, Gurucharan Singh & Subhash Chandar Sharma , , Latest Edition , Civil Engineering Drawing Manual, S Chand & Company (Pvt) Ltd. , , Latest Edition , Production Systems: Planning, Analysis And Control, J.L.Riggs, 3Rd Ed , , Latest Edition , Productions And Operations Management, A.Muhlemann, J.Oakland And K.Lockyer, Macmillan , , Latest Edition , Operations Research, J.K.Sharma, Macmillan , , Latest Edition , Spoken English – A Self-Learning Guide To Conversation Practice (With Cassette),, , Latest Edition , Quality Control And Applications, Housen&Ghose , , Latest Edition , Industrial Engineering Management, O.P. Khanna , , Latest Edition , Steel Structures, Dr.Subramaniam , , Latest Edition , Town Planning, S.C. Rangwala , , Latest Edition , Town Planning, K.S.Rangwala And P.S.Rangwala , , Latest Edition , Remote Sensing Methods And Application, Michael Hord, R , , Latest Edition , National Building Code Of India- Part-Iii.(2005),, , Latest Edition , Municipal And Panchayat Bye-Laws, Cmda Rules And Corporation Bye-Laws.,, , Latest Edition , Urban And Regional Planning, Ka. Ramegowda , , Latest Edition , Earthquake Resistant Design Of Structures, Pankaj Agarwal And Manish Shrikhande , , Latest Edition , Guidelines For Earthquake Resistant Non Engineered Construction, The Associated Cement Companies Ltd , , Latest Edition , Criteria For Earthquake Resistant Design Of Structures - General Provisions And Buildings, Is: 1893 ( Part 1 ) - 2002,, , Latest Edition , Code Of Practice For Ductile Detailing Of Rc Structures Subjected To Seismic Forces, Is:13920-1993.,, , Latest Edition , Earthquake Tips, C.V.R.Murty, , , Latest Edition , Indian Standard Code Of Practice, Is:1200.,, , Latest Edition , Estimating And Costing, Vazirani & Chandolu , , Latest Edition , Geometrical And Machine Drawing, N.D. Bhatt, Anand , , Latest Edition , Hydraulics, Andrew Parr , , Latest Edition , Fundamentals Of Pneumatic Control Engineering, Festo Manual , , Latest Edition , Electrical Technology, Hughes, , 8Th Edition , Machine Design Bandari,,, , Latest Edition , Industrial Engineering & Management, O.P Khanna , , Latest Edition , Industrial Engineering & Production Management, Martand Telsang , , Latest Edition , Production Engineering , P.C.Shrma. , , Latest Edition , Production And Costing, Gbs Narang And V.Kumar , , Latest Edition , Mechanical Estimating And Costing , Banga & Sharma. , , Latest Edition , Quality Auditing, D.Mills, Chapman And Hall , , 1993 , Refrigeration And Air Conditioning, V.K. Jain, , , Latest Edition , Industrial Refrigeration Hand Book, Wilbert F. Steocker , , Latest Edition , A Course In Refrigeration And Air Conditioning , Domkundwar , , Latest Edition , Principles Of Refrigeration, Dossat, , Latest Edition , Electronic Principles , Malvino , , Latest Edition , Microcontrollers, Principles And Applications – Ajit Pal – Phi Ltd., - 2011.,, , Latest Edition , Biomedical Instrumentation ,Anuradha Publications, Chennai, Dr.M. Arumugam , , Latest Edition , Bio Medical Instrumentation And Measurements, Ii Edition., Leslie Cromwell –Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering., Jacobson And Webstar , , Latest Edition , Hand Book Of Bio –Medical Instrumentation., R.S .Khandpur , , Latest Edition , Medical Electronics, Kumara Doss , , Latest Edition , Introduction To Medical Electronics, B.R. Klin , , Latest Edition , Introduction To Biomedical Instrumentation , Mandeep Singh Printice Hall India 2010. , , Latest Edition , Digital Communications, John G.Prokais , , 2011 , Biomedical Instrumentation And Measurements, Leslie Cromwell, Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering, Jacobson And Webstar , , Latest Edition , Hand Book Of Bio–Medical Instrumentation., R.S .Khandpur , , Latest Edition , Engineering Mathematics - Dr.M.K.Venkatraman, National Publishing Co, Chennai 2. , Engineering Mathematics – Dr.P.Kandasamy & Others, S.Chand & Co Ltd, New Delhi , Physics, Resnick And Haliday–Wisley Toppan Publishers–England , Engineering Physics–B.L.Theraja–S. Chand Publishers , A Text Book Of Sound–R.L. Saighal & H.R. Sarna–S.Chand & Co. , Mechanics–Narayana Kurup–S. Chand Publishers. , Fundamentals Of Physics – Brijlal And Subramaniam. , Fundamentals Of Electricity – D.N. Vasudeva – S. Chand & Co , Non-Conventional Energy Sources – G.D. Rai.- Khanna Publishers , Text Book Of Remote Sensing And Geographical Information Systems – M. Anji Reddy Bs Publications. , Engineering Chemistry – Jain & Jain – Dhanpat Rai & Sons. , A Text Book Of Engineering Chemistry – S.S. Dara – S. Chand Publication. , A Text Book Of Environmental Chemistry And Pollution Control – S.S. Dara – S. Chand Publication. , Engineering Chemistry – Uppal – Khanna Publishers. , Environmental Chemistry – V P Kudesia – Pragati Publishers. , Chemistry Of Engineering Material – C.V. Agarwal, Andranaidu C. Parameswara Moorthy – B.S. Publications. , A Text Book Of Inorganic Chemistry – P.L. Soni – S. Chand Publication. , Rain Water Harvesting – Hand Book – Chennai Metro Water. , Bhatt N.D. And Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50Th Edition, 2010. , Gill P.S., “Engineering Drawing”, S.K.Kataria & Sons. , Gopalakrishnan.K.R., Engineering Drawing, (Vol.I And Vol.Ii), Dhanalakshmi Publishers, Edition 2 , Venugopal.K, Sreekanjana G, “Engineering Graphics” New Age International Publishers. , K V Nataraajan “A Text Book Of Engineering Drawing” , Besant Agrawal, C M Agrawal “Engineering Drawing”, Tata Mcgraw Hill Education Private Limited. , Barkinson & Sinha, First Year Engineering Drawing, Pitman Publishers. , Communication Skill, Sanjay Kumar Pushp Lata, Oxford University Press , Communication Skill, , Gph Publication , English Communication Teory And Practical, Manoj Kumar Garg, Scholar Tech Press , Little Redbook - Grammar Made Easy, Terry O Brien
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
16.
Housing Urban and Rular Development #10052526 Price Bid
Implementation Of National E-Vidhan Application (Neva) End-To-End Digital Transformation Of Legislative Assembly. (Sh I- Providing Digital Transformation Facilities At Legislative Assembly) (Sh- Ii Provision Of High Speed Data Networking Poe / Network, Switches Ic Necessary Cabling And Accessories At Legislative Assembly).- 1 (SH:- I Audio Visual System ) 2 SITC of Digital combi Conference Control unit / Server units. Units must be Dante enable (must have minimum 2 Dante/ Network Ports) inbuilt from factorywith Integrated dynamics processor with programmable threshold, ratio, attack, and release of noise gate, AGC and limiter functions/ DSP with adaptive acoustic feedback, echo cancellation, parametric equalizer ( Dante, dynamic processor can be built to the controller/ server or integrated power supply unit) Unit Should have minimum 1 x Power Connectors, minimum 3 x Conference Network Ports or more than 1 x LAN Port, 1 x Balanced XLR audio input or more , 1 x Balanced XLR audio output or more, must be a capable of automatic or manual take-over of the Controller/Server by a spare controller units in case one would become inactive ,in built or external Recording capabilities, Audio Routing, Network Monitoring, Built-in diagnostics application and camera control capability., The Controller should be work on shielded network(non-proprietary) the above ports features can be complied through controller or integrated power supply. Controller Unit should support Voting & Interpretation. 19 Rack Mountable. Controller and server units should be from same OEM. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR 144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 3 SITC of integrated Power supply cum controller for conference unit with On/Off rocker/ switch with built-in indicator. It should have 48 V, LED indicator or better, Power good TTL output/ LED indicator provided on a sub D9 connector or better RJ 45 ports or Six 3-pin detachable Phoenix connectors are provided at the rear of the Power supply 1U or more to branch off the 48 V. 1U, 19 rack module, Mains power input: 100-240 VAC 60/50 Hz Output voltage: 48 VDC, Protection Short circuit: Overload, Temperature, Over voltage, Technology: Switched Mode Power Supply Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 4 SITC of one/two or more upstream ports towards the Central Unit. 2 or more powered downstream ports towards the network/ conference field devices. Network Extender cum change over unit extended powering unit supports redundant loop cabling. It shall be possible to daisy chain and loop several network extenders on the conference controller network. It shall be possible to loop Chairman/Delegate units between several network extenders to create redundancy on a network extender level, The Network Extender cum change over unit is powered via the external power unit. Conference OS software application detects possible failure and starts the switch over process accordingly by the operator commands. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 5 SITC of Integrated Flush mount Delegate conference unit with Speaker Built-In and with removable microphone capability, supported for Voting and simultaneous Interpretation, microphone push button with integrated LED, Physical / Capacitive 5 clear voting buttons with LED indicators. Should have in build with RFID/ NFC card reader for identification and authentication, Channels selector button with a OLED/ LCD display and headphone volume control, Built-in high- quality loudspeaker, minimum 1W or as per OEM, built in speaker frequency response: 200-15,000 Hz or better, Speaker shall automatically muted/ active when the microphone is active, to prevent acoustic feedback available in custom colours dimension, finishes, construction: steel / metal or as pr OEM, only 3.5 mm stereo jack sockets for headphone connectivity. “Connectivity: › 2 x RJ 45 port (IN/OUT). Loop through, daisy-chain cabling (non-proprietary).USB-C or mini-USB or mini din, Push & Lock/ screw socket to connect the detachable microphone. Microphone Input: › Dynamic range: > 90 dB or better › THD: 0.1% or better.Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 6 SITC of Integrated Flush mount Chairman conference unit with Speaker Built-In and with removable microphone capability, supported for Voting and simultaneous Interpretation, microphone push button with integrated LED , Physical / Capacitive 5 clear voting buttons with LED indicators. Should have in build RFID/NFC card reader for identification and authentication, Channels selector button with a OLED/LCD display and headphone volume control, Built-in high-quality loudspeaker, minimum 1W or as per OEM, built in speaker frequency response: 200-15,000 Hz or better, Speaker shall automatically muted/ Active when the microphone is active, to prevent acoustic feedback available in custom colours dimension, finishes, construction: streel / metal or as pr OEM,only 3.5 mm stereo jack sockets for headphone connectivity. “Connectivity: 2 x RJ 45 port (IN/OUT ). › Loop through, daisy-chain cabling (non-proprietary).USB-C Push/ mincon/ mini din& Lock/ screw socket to connect the detachable microphone. Microphone Input: › Dynamic range : > 90 dB or better › THD: 0.1% or better. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 7 SITC of Gooseneck Microphone 360 MM or above or as per site requirement must have a single/ dual flex gooseneck microphone (flexible top and lower sections) is equipped with USB C-based / mini-USB/ mini din push and lock/screw connector Polar Pattern: Cardioid/ Uni directional or better Shielded microphone, immune to mobile phone interference. Transducer principle: Back electret (condenser). Frequency response: 125 to 15000 Hz or better. Sensitivity @ 1 kHz/ Nominal input level : -43 dBV/Pa/ 85 dB SPL or better. Maximum SPL @ 1 kHz : 110 dB SPL or better. Signal-to-noise ratio/ Equivalent noise : 15 dB or better. Dynamic range : 90 dB or better. Microphone LED ring configurable with selection of RED and Green colour USB-C/ minicon/ mini din -based microphone connector. Connection: Push & screw /Lock. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 8 SITC of conference software should offer all-in-one software package that simplifies room setup and meeting control. Easy step by step configuration wizard and Room layout configuration for the technician Roles for meeting control: › Operator › Chairperson › Signage Specify available controls for each role and Capability to protect roles with password Create a single meeting template including:› Title › Delegates and seating › Optional badge configuration › Optional external recording of the meeting audio Start a meeting from the template or a new meeting It should Manage speakers from room layout, Manage the speaker list, Manage request list with drag and drop re-ordering capability. It should Start a voting session, Voting question, 2 or 3 options for voting and Public or secret voting It should have Signage for Meeting view with Room layout, speaker list and request list, Voting view with results screen, Dynamically switch between meeting and voting view when voting starts / stops. Consult or save up to 20 meeting reports, The reports contain meeting participants, the recording (if available) and timestamped voting items with overall and individual vote resultsVoting results are visualized in the operator, and chairperson screen, but also the signage screen will toggle to visualize the voting results Whenever a need arises a voting can be started on the fly. The voting gets a description, and it can be defined if it is a public or secret vote. In a meeting template participants can be added by simply typing their name and adding them to their assigned seat. Additionally, an RF-ID card can be assigned, allowing participants to identify themselves by logging into any conference device in the room. 9 SITC of Light weight headphone unit Transducer principle: Dynamic as per OEM Load rating: 20 mW or better Impedance: 32 Ω or more, Sensitivity: 94 dB/mW(+ 3 dB at 1 kHz) or better, as per OEM Frequency range 35/50-15,000 Hz or better, Connector: 3.5 mm stereo jack. complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 10 Supply & Laying of Conference Cable 2 Mtr or as per OEM recommended Cat6 shielded cable with high quality STP end connectors complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 11 Supply & Laying of Conference Cable 20 Mtr or as per OEM recommended Cat6 shielded cable with high quality STP end connectors complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 12 SITC of 6 two-way ceiling/ Surface mount speaker with at-least 0.5 HF driver. The speaker must have frequency range (-10 dB) of 70 Hz – 20 kHz; Sensitivity > 88 dB (1W/1m), delivering Max. Calculated SPL (peak) > 100 dB with continuous power handling 30W @ 100V or less. The speaker should have transformer tapping up to 30W .The speaker cabinet should have at-least 170°conical dispersion pattern complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 13 SITC of 240w mixer amplifier with Inbuilt Bluetooth for audio streaming and supports audio playback from USB pen drive with4 microphone/line inputs, plus music source input and insert feature to use as a pre/power amplifier. It also has optional 2 tone chime generation for input 1 complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 14 Supply, Installation, Testing & Commissioning of open architecture DSP having 12 mic/line level inputs with AEC and phantom power, 8 line level outputs, 4x4 USB audio channel, 8 Digital I/O ports, Dante, minimum 4 x RJ-45 Dante ports, minimum 8 audio files can be stored in in-built storage for playback including pink noise, white noise etc, minimum 16 channel bi-directional digital audio expansion bus, zoom & Microsoft teams certified, sampling rate: 48KHz or better, Ethernet monitoring and control, Front panel main input and output signal presence and clipping LEDs; THD + Noise <0.02% or better; Crosstalk <- 90 dB or better; processor: 64-bit. Certified for Microsoft Teams and Zoom for Audio and Video collaboration complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 15 Supplying and laying of 16 AWG 2-core speaker Cable with 19-strand annealed bare copper conductors; Semi- rigid PVC insulation; Twisted, unshielded; Riser rated PVC jacket; NEC CL3R, CEC CMG, RoHS compliant complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge. 16 Supply, Installation, Testing & Commissioning of AV Quad Core control processor with minimum 1x RS232/RS422/RS485, 1x bidirectional RS232 or more, 2 or more IR/Serial, 4 or more Relay, 4 or more Digital I/O. control AV devices over Ethernet port supporting 10/100/1000Base-T and should support IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTPS, NTP, SFTP, SMTP, SNMP, SSH protocols. Should have SDRAM: Min 2GB or more and Flash Memory: Min 8 GB or more. Should have Built-in IR receiver for recording IR commands. Should be Operational in up to 45°C temperature. Should have Regulatory compliance: CE/UL or any equivalent complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 17 Supply, Installation, Testing and Commissioning of 10 Tabletop capacitive touchscreen with 1280x800 resolution and 24-bit color depth, Pixel density 149 PPI; Aspect ratio - 16:10; Brightness- 420 nits; Contrast - 800:1; Viewing angle ±85° horizontal, ±85° vertical; SDRAM- 2GB, Flash- 8 GB; Motion & Lighting sensor- On/off OR Auto/manual; Connectors — 1 x female RJ-45; Data rate: 10/100/1000Base-T, half/full duplex with autodetect; Protocol DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1x, SFTP, SSH, TCP/IP, UDP/IP; Touch panel and control processor should be from same OEM complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 18 Supply, Installation, Testing and Commissioning of 98 4K UHD(3840 X 2160) Slim DLED display, Aspect Ratio 16:9, Brightness 600 Cd/m2 or better, Pixel Pitch 0.5622mm(H) × 0.5622mm(V) or better, Haze 30% or better, Viewing Angle 178°or better, HDMI IN X 3, HDMI Output X 1 ,Audio Output 1 x 3.5mm, USB 2.0 X 1 ,USB 3.0 X 1 ,RS232 X 1, LAN X 2(IN/OUT), USB Type-C X 1, 4GB DDR4 memory, 32GB storage, 24 W in built speaker, 24/7 operation, Operation Temperature:0℃ - 45℃, Operation Humidity: 10% - 90%. complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 19 Supply, installation, testing and commissioning of iPad Pro 13″ (M4): Ultra Retina XDR Display, 1TB, Landscape 12MP Front Camera / 12MP Back Camera, LiDAR Scanner, Wi-Fi 6E, Face ID, All-Day Battery Life, Nano-Texture with app from conference OEM if control of IPAD and running of NIC application is required from the conference server complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site including adaptor for USB C to RJ 45. 20 Supply, Installation, Testing and Commissioning of 4K @ 60 fps PTZ Camera with minimum 30X Optical Zoom, min 100 Presets, simultaneous output through Ethernet, HDMI, 12G-SDI and USB 3.0, Audio In and can be controlled via RS232 & 422 In & Out & IP, -170° ~ +170° Panning angle, -30° ~ +90° Tilting angle. The camera tilting and panning speed should be minimum 300° per second. Should support, SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be CE, FCC, RoHS & BIS Certified complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 21 Supply, Installation, Testing and Commissioning of Multi-Functional Multi-Camera Controller Joystick should have all required Control Ports complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 22 Supply, Installation, Testing and Commissioning of 4K Video mixer / Speaker Auto Tracking switcher which canseamlessly integrates with above PTZ cameras and conference microphone systems to automatically capture and switch to close-up views of the person speaking, Supports up to 9 Cameras with Automatic Layout Switching, speaker auto-control setting, including override and FIFO modes, customized conference visuals by adding the logo, background images and text overlay for individual speakers, supports 4CH 4K UHD or up to 9CH Full HD video sources,compatible with network-based H.264 RTMP/RTP/RTSP/SRT, and NDI|HX video sources, Video Outputs : 2 x HDMI, 1 x RJ45, Audio I/O : 2 x 3.5 mm stereo Mic in / out complete as per specifications complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 23 Supply, Installation, Testing and Commissioning of 4K Video Recorder, Up to 2ch 4K UHD or 4ch FHD Video Sources Capturing,Switching, Recording and Live Streaming, Support Dante Audio, NDI|HX and SRT Streaming Protocols, PGM Recording up to 4K UHD 30fps with 2TB Internal Storage, Easily Add Background Images, Overlays and Change Video Layouts in Video Making, Supports Overlay PNG Images with Transparent, Opaque, and in Between, Video Input Interface: HDMI x 2, RJ-45 x 2 (supports IP streaming: up to 4 channels, USB x 3 (UVC), Audio Input Interface : 3.5mm Stereo Mic in, Video Output : HDMI x 1 for loop out, HDMI x 1 for preview, Audio out : 1 x 3.5 mm stereo, Recording Mode : 1 mixed + 4 individual original, Control : RS-232 / LAN complete as per specificationcomplete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 24 Supply and Laying of SDI cable complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 25 Supply, Installation Testing & Commissioning of AV over IP 4K Encoder 4K 60 4:4:4with2 x HDMI and 1 x USB-C input and 1 x HDMI output, Auto Video 4K scaler, Switching between the three inputs can beperformedautomaticallyusing auto-switching (input detect) mode, programmatically via a control system, or through a web browser, HDMI loop- through: display any of the three locally connected sources, standard PoE power (15w or lower), HDMI 2.0 & HDCP 2.2, AES-128/256 Encryption, Audio : Analog Stereo 2- channel, HTTPS Secure API, 802.1x Authentication for Network access control, SSH Network Protocol, , Auto Discover all endpoints on the network, VLAN tagging,LLDP Support, QoS Support, USB 2.0 over IP (KVM), RS- 232 over IP, IR over IP, A single Gigabit LAN Port for PoE Power, 4K UHD Video, Latency not more than 10 ms,High Dynamic range(HDR),futureupgradableto Dante / AES 67 complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 26 Supply , Installation, Testing & Commissioning of Decoder supports 4K UHD over Gigabit Ethernet, Bit Rates 50 to 800 Mbps, Video Codec: JPEG2000 based visually lossless video compression algorithm, supports: 4K60 4:4:4, AES-128 Encryption, 1x HDMI with HDCP 2.2 & Sacling Supports a wide range of resolutions and rates, up to 4K, Streaming protocols include IP, UDP, TCP, IGMP, and IGMP, Built-in videowall function, Auto Video Scaler, Vlan Tagging , Analog to digital Conversion: 24 bit, 48 kHz; Control: USB 2.0 over IP (KVM), RS-232 over IP, and CEC over IP, Compliance: CE, FCC, RoHS, WEEE complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 27 SITC of core network switch 24 port 10 G. Efficient use with, 8 SFP+ ports with 10 Gbit,640 Gbps switching capacity, Web interface, Slim 1/ 2 RU housing, Connections – 8 x SFP+ 10 Gbit, 8 x 10G copper. RJ45, RS232, RJ45 Ethernet, 100-240 VAC, approx. 70W, Redundant power supply complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 28 Supply, Installation, Testing and Commissioning of network switch — 24x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) 24-port 1000BASE-T (RJ45) PoE+, 2-port 10GBASE-T (RJ45) all independent, 2-port 10GBASE-X (SFP+) all independent, 128Gbps non-blocking fabric across 28 ports • Out-of-band 1G Ethernet Management port • Mini-USB and RJ45 RS232 console ports and USB storage port, Full L3 feature set and non-stop forwarding (NSF) stacking, Full width form factor with one-unit rack mount kit, one modular 550W PSU in first power supply slot,second slot with a blank cover for future PSU expansion complete with all required accessories needed for sucessful installation and as per direction of Engineer-in-Charge as per requirement of site. 29 Supply, Installation, Testing, and Commissioning of 10G SFP+ modules etc as required. 30 Supply and Laying of 6 core single-mode optic fibre cable in existing casing/ conduit / wall etc complete as required. 31 Supply, Installation, Testing, and Commissioning of 6U AV Rack etc as required. 32 Supply, Installation, Testing, and Commissioning of 42U AV Rack etc as required. 33 Supply and Laying 2m HDMI cable etc as required. 34 Supply, Installation, Testing, and Commissioning of fibre cable accessories etc as required. 35 Supply, Installation, Testing, and Commissioning of AV cable and connector etc as required. 36 Supply and Laying of Cat6 Cable in existing casing/ conduit / wall etc complete as required. 37 Supply and install raceway compartment 100/300 mm x 38 mm, 1.6 mm thick, under-floor metal trunking/raceway with all accessories made from hot-dip pre-galvanized metal-coated steel sheet. With other necessary accessories etc as required. 38 Design, Supply, testing & commissioning of telescopic type MS mounting frame, duly powder coated in custom colour, conference table mounting arrangement for holding iPads for Members, including locking arrangement etc. The mount should have Horizontal/vertical suitable for viewing by the members in the house or as per direction of Engineer in Charge. 39 SITC of Redundancy setup This module allows automatic take-over of the Controller/Server by a spare engine in case one would become inactive. Includes an power switch to facilitate automatic startup of spare engine etc as required. 40 SITC of 20W 2 way column speaker, 3mm aluminum extruded enclosure, sturdy swivel bracket, both direct and LMT connectivity, perforated metal, transducers: 4x2 woofer, 1x1 dome tweeter, input: euro block, sensitivity: 98dB, Nominal impedance: 8 ohm, crossover freq. 6kHz, freq. range: 160Hz~20kHz, Power Taps 100V: 5, 10, 20W, weight: 2.5kg etc as required. 41 (SH:-II Networking system) 42 Supplying, installation, testing and commissioning of Enterprise Grade Core Switch have 24 x 1G/10G/25G Fiber based ports and 4 x 40/100G QSFP+ ports, minimum 1.8 Tbps of switching fabric and minimum 900 Mpps of forwarding rate. minimum 8 GB RAM and minimum 8 GB Flash , Shall have minimum 50K MAC Addresses and 1K VLANs.must have hot swappable 1:1 redundant internal power supply and redundant fan. Must support BGP, VRF, VXLAN, OSPF Routed Access, Policy-Based Routing (PBR), PIM SM, and Virtual Router Redundancy Protocol (VRRP) from Day 1 with 5 Year Warranty 43 Supply, Installation, Testing & Commissioning of SFP+ 100G optical modules for fibre uplinks. Compatible for stacking of Core switches, includes 5 years warranty etc. complete asper attached specifications and as per direction of Engineer in Charge as per site requirement. 44 Supplying, installation, testing and commissioning of 24 Port PoE+ Access Switch: 16 x 10/100/1000 Base-T POE+ ports, 8 x multigig copper ports (2.5G/5G/10G) for Wi-Fi-6 APs and 4 x SFP+ uplinks ports and Dedicated/virtual Stacking Port and required cable for Stacking should be considered from Day1, 24 ports should support PoE (802.3af) and PoE+ (802.3at) with a PoE power budget of 370 Watts ,shall have minimum 270 Gbps or more of switching fabric and 210 Mpps (64 byte packet) of forwarding rate ,minimum 2 GB RAM and 4 GB Flash, minimum 16K MAC Addresses and 500 VLANs, should support internal hot-swappable Redundant Power supplies with 5 Year Warranty. 45 Supplying, installation, testing and commissioning of Access Switch NON POE 24 nos. 10/100/1000 Base-T ports. and 4 nos. SFP+ uplinks portsand Dedicated/virtual Stacking Port and required cable for Stacking should be considered from Day1,shall have minimum 128 Gbps or more of switching fabric and 95 Mpps (64 byte packet) of forwarding rate ,minimum 2 GB RAM and 2 GB Flash, minimum 16K MAC Addresses and 500 VLANs, should support internal hot-swappable Redundant Power supplies with 5 Year Warranty. 46 Supplying, installation, testing and commissioning ofWi-Fi 6 Indoor Access Point, MIMO - 4x4:4SS, Min. 2.50 Gbps Aggregate throughput, should support WIDS/WIPS inbuilt, should support BLE/IoT Radio. Interfaces - 1 x 100/1000/2500 Mbps with 05 Yrs of required Licenses and support. 47 Supply, Installation, Testing & Commissioning of SFP+ 10G optical modules for fibre uplinks. Compatible with access/core switches, includes 05 years warranty etc. complete asper attached specifications and as per direction of Engineer in Charge as per site requirement. 48 SITC of SDWAN Router supporting minimum 5 Gbps of IPv4 Forwarding throughput and minimum 2Gbps of IPSec throughput, minimum of 8 GB or more Memory and 16 GB or more flash storage, Multi-core x86 processor or better processor and minimum – 2 x 1G/10G SFP+ Wan Ports, 04 x 1G copper ports & should be updgradable if required, USB and RJ45 console Portsincludes 05 years warranty & Licenses etc as per site requirement. 49 Supply, Installation, Testing & Commissioning of UTP Cat 6a S/FTP Cable LSZH etc. in existing casing/ conduit/ wall/ trench etc complete asper attached specifications and as per direction of Engineer in Charge as per site requirement. 50 Supply, Installation, Testing & Commissioning of of19 1U straight Un-loaded Patch Panel, 24-portetc. complete as reqd. 51 Supply, Installation, Testing & Commissioning of Shielded Information outletsCategory 6a, EIA/TIA 568-C.2 etc. complete as reqd. 52 Supply, Installation, Testing & CommissioningofSquare Dual Face plate, 86mmx86mm 3x3complete 3 etc. complete as reqd. 53 Supply, Installation, Testing & Commissioning ofmounting patch card Cat 6a S/FTP, 1 meter long, etc. complete as reqd. 54 Supply, Installation, Testing & Commissioning ofmounting patch card Cat 6a S/FTP, 2 meter long,etc. complete as reqd. 55 Supply, Installation, Testing & Commissioning of 6-Core armoured LSZH indoor Multi ModeFiber cable OM4 etc as required. 56 Supply, Installation, Testing & Commissioningof 12 portFibre MMF OM4 Panel RackMountable with Loaded LC adapter plate, pigtails complete etc. complete as reqd. 57 Supply, Installation, Testing & Commissioning of 24 portFibre MMF OM4 Panel RackMountable with Loaded LC adapter plate, pigtails etc. complete as reqd. 58 Supply, Installation, Testing & Commissioning of LC-LC Style MMF OM4Fiber Patch Cord 2 Mtr etc. complete as reqd. 59 Supply, Installation, Testing & Commissioning of 3x3 metalic surface box ISI etc. complete as reqd. 60 Supply, Installation, Testing & Commissioning of Network Rack 9 U wall mount : 600W*600H with Accessories etc. complete as reqd. 61 Supply, Installation, Testing & Commissioning of Network Rack 12 U wall mount : 600W*600H with Accessories etc. complete as reqd. 62 Supply, Installation, Testing & Commissioning of Network Rack 27 U with below included: Network Rack 800W x800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs etc. complete as reqd. 63 Supply, Installation, Testing & Commissioning of Network Rack 42 U with below included: Network Rack 800W x 2000H x 800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs, 42 U 19 Profile Typeangle, Front Rack Type 1-800W X 2000(42U)H X 1000Detc. complete as reqd. 64 Supply, Installation, Testing & Commissioningof1U Cable Manager Horizontal Single sided etc. complete as reqd. 65 Supply, Installation, Testing & Commissioning of 3 KVA UPS 0.90 input power factorfeatures. THD(i) shall be less than 3% in the entire loading range. Input power factor shall be more than 0.95. from 25% to 100% load. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Single Phase Input and Single Phase Output. ( Input - 220V - 250V, Single Phase, 2 wire. / Output - 200Volt, Single Phase, 2 Wire.)Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be internal type and suitable for 30 minute backup on 100% load etc. complete as reqd. 66 SITC of 10 KVA UPS 0.90 input power factorfeatures. THD(i) shall be less than 3% in the entire loading range. Input power factor shall be more than 0.95. from 25% to 100% load. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Single Phase Input and Single Phase Output. ( Input - 220V - 250V, Single Phase, 2 wire. / Output - 200Volt, Single Phase, 2 Wire.)Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be internal type and suitable for 30 minute backup on 100% load etc. complete as reqd. 67 Supply, Installation, Testing & Commissioning ofWater Leakage Detection System etc. complete as reqd. 68 Supply, Installation, Testing & Commissioning ofRodent control system etc. complete as reqd. 69 Supply, Installation, Testing & Commissioning ofSteel Cement Laminated Raised Floor, Size (mm): 600x600 35mm etc. complete as reqd. 70 Supply, Installation, Testing & Commissioning of Door access control system etc. complete as reqd. 71 Supplying and Fixing following sizes DLP PVC adaptable trunking system for laying of wires for various services complete with accessories such as angle and end cap, Junction, Jointetc. complete as required. 72 32 x 12.5 73 32 x 16 74 32 X 20 mm 75 80 X 50 mm 76 105 X 50 mm 77 150 X 50 mm 78 195 X 50 mm 79 Supplying & Laying of one number XLPE insulated stranded copper armoured power cable of 1.1 KV grade of following size in existing casing/ conduit/ tray/ wall/ Race ways / ductetc as complete asper attached specifications and as per direction of Engineer in Charge as per site requirement.a) 3 core 4 sq.mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Delhi View Result →
17.
Rural Development #10050759 Price Bid
Supply And Installation Of Sound System On Hire Basis At Rashmela Ground And Its Circumference Along With Its All Accessories Including Necessary Connection W.E.F. 27.11.23 To 20 Days Complete- 1 Supply And Installation, Oh Hire Basis Tri-Amplified Hangingsystem ( Oem ) Frequency Range ( -10 Db ) 48 Hz - 18 Khz, Frequencyresponse ( ‡3 Db ) . 60 Hz - 16 Khz. Horizontal Coverageangle ( -6 Db ) . 90 Deg. Nominal ( 250 Hzvertical Coverage Angle ( -6 16 Khz ) Db ) : Varies With Array Size And Configuration, System Input Power Rating: Lf: 2000 W Continuous, 8000 W Peak ( Aes / 2 Hour ) Mf: 600 W Continuous, 2400 W Peak ( Aes / 2 Hour ) , Hf:150 W Continuous, 600 W Peak ( Aes / 2 Hour ) , Maximumpeak Output1 136 Db To 146 Db, 1M ( Frequency / Bandpass Dependent ) , Recommended Amplification: Lf: 2 X 1000-2000W Into 8 Ohms ( 2X Lf Transducers Powered Independently ) Mf: 600 - 1200 W Into 8 Ohms, Hf: 300 - 600 W Into 16 Ohms For 20 Days. 2 S / Installationon Hire Basis Pa Array Speaker System Withtrus Mounting ( Made In Italy ) High Performance Dual Drivepower Rating 1000W Rmsconfiguration Two Way Frequency Response 55-20.000Hz 3 18 Active Dual Drive Powered System Subwoofer Maximum Spl ( 1M ) 141 Db, Frequency Range ( -10Db ) 29 Hz150 Hz, Frequency Response ( -3 Db ) 35 Hz - 120 Hzbuilt In Hiq Amp With Dsp Facility, Power Rating 2000 Wpeak. Input Impedance: 40K Balanced 4 S / I Powred Amplifer With Dsp Facility Channels Sensitivity 1.4Vrated Power Output ( Per Channel ) 3000W20, 2100W 40, 1200W 80Signal To Noise Ratio ( Below Rated 1 Khz Power At 8 Ohms ) 103 Db ( A-Weighted ) Thd < 0.5%Frequency Response ( At 1W, 20 Hz - 20 Khz ) 0 Db, -1 Db Crosstalk ( Below Rated| Power ) 20 Hz To Khz >70 Db 5 Two Way Slage Monitor With Dsp Preset Pecifications Frequency Range ( - 10 Db ) : 60 Hz - 20 Khzfrequency Response ( ‡3 Db ) : 70 Hz - 20 Khz, Coveragepattern: 50° X 90° Nominal, Crossover Modes: Passive / Bi-5 Amp Crossover Frequency: 1.1 Khz, Power Rating: Passive Full- Range 800W 6 S / I Of Digital Console Presonus Studio Live 32Channel / 7 S / Installation On Hire Basis Soundcraft Vi Series Digitalconsole 8 S / Installation On Hire Basis Speaker Management 9 S / Installation On Hire Basis Graphic Eqlizer 10 S / Installation On Hire Basis Anti Feedback Destroyer 11 S / Installation On Hire Basis High Power Two Way Loudspeakersystemtype Dual 15, Two Way, Bass Rofox Froquancy Range ( -10 Db ) 37 Hz - 20 Khz Coverege Pattern : 75° X50° Nominal. Uf Duver 2 C All270511 Differential Drive Woofer. Il Drivatvolu 7452114 ( Voico Coll ) Compression Driver Sensitivity 99 Db Spl ( Passive Mode ) Ratedmaximum 3Pl @ 1 M. ( 3.3 Ft. ) Nominal Impedance 4 Ohms Power Rating 1200 W / 2400 W / 4800 W 12 S / Installation On Hire Basis Froquency Range ( -10 Dd ) 34 Iz20 Khz Frequency Rosponse ( +3 Db ) 42 Hz - 19 Khzcoverage Pattern 90° X 50° Nominal Crossover Modes: Bi- Amppassive, Extemally Switchable Crossover Frequency1.3 Khzpower Rating Passive. 1600 W / 3200 W / 6400 W ( Continuous 1 Program / Peak ) : Bi-Amp Lf: 1600 W / 3200 W / 6400 W Bi-Amp Hf: 75 W / 150 W / 300 W Maximum Spl2 136 Db Spl Peak. 13 S / I Sennhiser 5000 Series In Ear Monitor 14 S / I Audio Technica In Ear Monitor 15 S / I Shure Sm 58 Microphone 16 S / I Shure Sm 57 Microphone 17 S / I Of Servo Stabilizer 18 Arrangement Of Complete Sound System Of Hom With Driverunit, Paging Paging System, Amplifire, Microphone Etc As Reqd. 19 Arrangement Of Complete 63 Kva Dg Set With Fuel, Mobil, Operator Including Necessary Connection On Hire Basis’
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
18.
Power #9921536 AOC
Tender For Material Supply, Spares & Special Tools - RGC - Construction of 33/110kV Step Up GIS at Pushpakandam-- 1 Design, Engineering, Manufacture, Testing at manufacturers works, Delivery at site including all materials, accessories such as OLTC,RTCC, with Transformer Oil and 10% extra Oil, spares,Gaskets, OTI,WTI,MOLG indicators with transducers and Tools as per specification , loading and unloading, transportation, handling, proper storage at siteThree Phase Two Winding Transformer33/110kV, 60MVA Capacity with optical sensors and Remote Data Transfer facility with optical communication media, and all other accessories complete, with SAS Integration Scope , all required valves and flanges for NIFPS shall be provided for transformer at the time of transformer design itself,inclusive of necessary connectors/clamps suitable for Aluminium tube/ACSR conductor(All other items as per technical specification / Layout drawings) - intended for Renewable Energy Evacuation 2 Design, Manufacture, Testing at Manufacturers works, Transportation and Delivery of 110 kV, 3 Phase Encapsulated Double Busbar Indoor Gas Insulated Switchgearequipmentand other accessories at Substation siteand as per respective Technical Specifications, Single Line Diagram, General Arrangement Drawings, IS/IEC standards, approval of KSEBLand relevant special conditions applicable. The quote for each bay shall include necessary interconnecting GI bus ducts within the building. The supply include all accessories of GIS bay, earthing materials for forming the earth grid inside the GIS hallas per standards of GIS earthing (Cu/Al), including RF Earthing, Cable tray, control cable from GIS to LCC, LCC panel, ladder etc. complete. 3 110 kV GIS Feeder Bay with PT(40kA/ 1250A min) 4 110kV GIS Double Bus bar arragement with PT(40kA/ 2500A min) 5 110kV GIS Bus Coupler Bay(40kA/2500A min) 6 110kV GIS Transformer Bay (40kA/1250A min) 7 Polymer housedSurge Arrester suitable for 110kV, 10kA, Class 3 withclamps, terminal connectors suitable for connection of any type of conductor or Al/cu pipe bus as per requirement, leakage current measuring meter with counter, flexible copper cable of required size and all accessories complete 8 110kV composite solid core station post insulator , clamps, connectors etc suitablefor Al/ Cu Pipe Bus /Conductors. 9 Neutral CT (NCT) 36kV 3150Afor 60 MVA 110/33kV, Power Transformer with structure including clamps,terminal connectors and 36kV composite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete-Ratio 1200-600/1-1 Amps(33 kV side) 10 Neutral CT (NCT) 36kV 3150A for 60 MVA 110/33kV, Power Transformer with structure including clamps,terminal connectors and 36kV composite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete-Ratio 400-200/1-1 Amps(110 kV side) 11 UG power cable- 110kV, Single core, 630sqmm, Aluminium conductor,XLPE insulated,Aluminium Corrugated sheathedandHDPE Outer jacket under ground cable having rated short circuit capacity for both conductor and armourwith necessary Non - Magnetic , Metalic Trefoil/flat formation clamps atminimum 3 metre interval, steel/nylon cable ties wherever necessary 12 Outdoor termination kit suitable for 110kV, 630 Sqmm Single core Copper/ Aluminium UG cable for yard structure mountinginclusive of all accessories like earthing cable, suitable Non - Magnetic, Metalic clamp for fixing cable to support structure etc at 1m interval complete. 13 Indoor Plug in Type GIS termination kit for 110kV 630 Sqmm XLPE Single coreCopper/ Aluminium UG cable,inclusive of all accessories like earthing cable, suitable Non - Magnetic , Metalic clamp for fixing cable to support structure etc at 1m interval complete. 14 Supply of 4IPS Schedule 40 Al. Tube including requiredJointing Sleeves, Expansion joints, etc. withnecessary fixing clamp and all accessories complete for 110kV,33kV equipment to equipment connection 15 Three Phase Link Box 6.6kV withoutSVL for 110kV cable with copper bonding cable(minimum cross-section 300sq.mm) including all accessories 16 Three Phase Link Box 6.6kV withSVL for 110kV cable with copper bonding cable(minimum cross-section 300sq.mm) including all accessories 17 33kV Indoor composite VCBPanels having bus capacity 31.5 kA for 3sec, 3150A at STC continuous rating, 4 nos feeder bays having capacity not less than 1250A ,2 nos transformer feeder bays (for 33/110kV transformer) having capacity not less than 2000A ,1 nos transformer feeder bay ( for 33/11 kV5MVA Transformer ) having capacity not less than 1250A and1 nos bus coupler with bussection panel not less than 3150A, two bus PT panel at both side of the bus .Every feeder/incomer/ bus coupler shall have CT, E/S, synchro check, SEM Energy Meter, Ammeter, Voltmeter, Control and Protectionincluding earthing as per standards(Cu), cable tray, control cables etc completeand as per SLDand specifications. 33/110 kV 60 MVA Transformer feeder shall have provision for termination of cable size 3 runs per phase of 630 sqmm Aluminium cable. Each incomer panel (transformer) shall be provided with additional special protection class CT cores for differential protection scheme M1 and M2 at 110kV transformer C&R panel. All the feeders shall be remote controlled from SCMS and from the local console of the numerical relays with Bay Control Unit and protection unit including supply of the same. The supply includes one number VCBfor each ratings as spare (2000A, 1250A) and two numbers of service trolley for VCB , E/S, PT and spares (as per attached list clause 6.6 & 6.7 of volume 2, Chapter 27). 18 Polymer housedSurge Arrester suitable for 33kV, 10kA, Class-3 with clamps, terminal connectors etc. suitable for connection ofany type of conductor or Al /Cu pipe bus as per requirement, including leakage current measuring meter with counter, flexible copper cable of required size and all accessories complete (33kV Feeder/ Transformer) 19 33kV 800A Triple Pole Line Isolator with Structure, clamps, terminal connectors etc. suitable for connection of any type of conductor or Al/Cu pipe bus as per requirement 20 33kV Pin insulator with pin 21 33kV composite solid core station post insulator with high level structure with clamp & connectors suitable for Al pipe/conductor. 22 UG power cable- 33kV 1Cx630sqmm Aluminium 33kV, XLPE Aluminium armoured having rated short circuit current capacity for both conductor and armour and HDPE outer jacket for 33/110kV 60MVA transformer incomer with necessary Non-magnetic, metallic, Trefoil/flat formation clamps at minimum 3 metre interval and steel/nylon cable tie wherever necessary 23 Outdoor Heat shrinkable termination kit suitable for 33kV, 630 Sqmm XLPE Single core Aluminium UG cablewith necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesincluding cost of bimetallic strip etc. and suitable Non-magnetic, metallic clamps for fixing cable to support structure at 1m interval complete. 24 Indoor Heat shrinkable termination kit suitable for 33kV, 630 Sqmm XLPE Single core AluminiumUG cablewith necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesincluding cost of bimetallic strip etc. and suitable Non-magnetic, metallic clamps for fixing cable to support structure at 1m interval complete. 25 Design, Engineering, manufacturing, testing at Manufactures worksite, supply, delivery,loading and unloading, transportation, handling, proper storage at site,supervisionof erection, testing and commissioning of 33/11kV, 5MVA three phase two windingtransformer as per technical speciationsincluding all materials, accessories such as Off Load Tap Changer, Transformer Oil and 10% extra Oil, spare Gaskets, OTI,WTI,MOLG indicators with transducers as per specification and Remote Data Transfer facility with optical communication media, with SAS Integration Scope , inclusive of necessary connectors/clamps suitable for Aluminium tube/ACSR conductor(All other items as per technical specification / Layout drawings) - intended for Renewable Energy Evacuation 26 Neutral CT (NCT) for 5 MVA 33/11kV Power Transformer with structure including clamps,terminal connectors andcomposite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete -Ratio 200/1-1 Amps (33kV side) 27 Neutral CT (NCT) for 5 MVA 33/11kV Power Transformer with structure including clamps,terminal connectors andcomposite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete -Ratio 300/1-1 Amps (11kV side) 28 Alumimium UG Cable- 33kV, 3Cx300 sq.mm XLPE insulated, Galvanised steel strips armoured power cable for feeders / Aux Tfr with necessarymetallic, non magnetic clamps atminimum 3 metre interval, steel/nylon cable tie wherever necessary 29 Outdoor Termination kit Heat Shrinkable Type for 3Cx300sqmm Aluminium 33kV, XLPE Galvanised steel strips armoured power cable with necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesetc. and suitable clamps for fixing cable to support structure at 1m interval complete 30 Indoor Termination kit Heat Shrinkable Type for 3Cx300sqmm Aluminium 33kV, XLPEGalvanised steel strips armoured power cable with necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesetc. and suitable clamps for fixing cable to support structure at 1m interval complete 31 Distribution Transformer 11kV/433V, 250 kVA, Star rated (BEE Latest notification as on date of tender)with 11kV & 433V outdoor cable entry box, suitableDistribution Box with LT cable (Trfr to LT box) with 500Amps Fuse and MCCB including all accessories like Busbar, Metering Cabinets etcand its fixing -mounting arrangement on plinth 32 11kV Outdoor type RMU withcombination of 2( two) numbers ofSF6 insulated/arc quenching motorized Load Break Switches and one Vacuum/SF6 breaker suitable for 11KV/433V Auxillary Transformer/ Outgoing feederas per the KSEBL approved make with CT, VT, Control and Protection Relays - Overcurrent/REF etc. and Metering, Indications complete (SCADA compatable) as per the technical specification 33 11kV Outdoor type RMU withcombination of 2( two) numbers ofSF6 insulated/arc quenching motorized Load Break Switches as per the KSEBL approved make with CT, VT, Control and Protection Relays - Overcurrent/REF etc. and Metering, Indications complete (SCADA compatable) as per the technical specification 34 Supply of 11kV indoor VCB 5 panel set with combinations of Incomer feeder panel with PT (1 number), Outgoing feeder panel (3 number) and transfomer panel (1 number) with bay control and protection unit (BCPU) for integration with upstream Substation Automation System (SAS) through HSR/PRP topology (IEC 61850 edt 2 compliant) with protection philosophy specified in technical specification along with supply of accessories necessary for operational spares and special tools (as per attached list clause 37.6 & 38 of volume 2, Chapter 30). Bus Bar ratings are 2000A. Circuit breaker shall be E2 M2 C2 class as per IEC 62271-200. Feeder, transformer and incomer panel shall have capacitive voltage indicators (CVI) and only incomer panel BPCU will have PT inputs. Feeder,transfomrer and incomer panels shall house one each multi-function meter (MFM) and DLMS compatible energy meters. Each Incoming and outgoing feeders shall be equipped with split core type CBCT for Sensitive Earth Fault Protection 35 Supply of Polymeric type LA suitable for 11kV 36 3Cx300sqmm 11kV Aluminium XLPE insulated under ground armoured cable, with necessaryclamps for fixing with support structure at 3 m interval 37 3Cx300sqmm11kV Aluminium XLPE Under ground cable Termination Kit Outdoor Heat Shrinkable 38 3Cx300mm2 11kV Aluminium XLPE Under ground cable Termination Kit Indoor Heat Shrinkable 39 Supply of Hot dip Galvanised LatticeStructurefor 33kV,11kV& 110 kV Switch Yard, Columns/Beams/Pre fabricated Cable Supports in Trenches/lightning mast structure/ lighting mast structure/ equipment structures unless otherwise not specified else where in the BOQ etcinclusive of N&Betc(as per respective Technical Specifications, standards and relevant special conditions). 40 EOT Crane of suitable capacity (minimum 5T safe working load) with single hook and double girder arrangement for GIS Hall. Contractor shall submit the capacity calculation of the crane incorporating 25% additional load considering erection and maintenance of largest GIS component / assembly. 41 DG set 125 kVA silent type, Outdoor plinth mounted withAMF panel, Auto Load Change over module and panels, Battery and its charger, Diesel Tank etc with SAS integration facilities including all accessories complete 42 Battery Set - 110 V, 400Ah , Lead Acid plante Battery SetC10 Duty cycle (Rating is tentative and final sizing as per the load calculation shall be under bidder scope) & Installationwith Battery Racks made with acid proof material ,two number of indsutrial type flame proof exhaust fan and all necessary arrangements including tool kit like hydro meter, chemical gloves, multimeter etc. 43 48V, 200 AH VRLA Battery Set with all associated accessories for reliable communication & data acquistion project complete as per specifications 44 SCADA compatible 110V Dual mode (FC+ BC) Battery Charger, with independent Float (FC)and Boost charging (BC) (2 number rectifier unit) min-FC-80A, BC-80A, suitable for 110V Battery bank as per design and shall charge Battery set as per technical requirement during float /boost mode without interruption to load. The charger shall have two independent incomer supply.(Battery charger shall meet the full DC load during boost condition and the Bidder shall propose the final sizing of the battery charger during detailed engineering for approval)(Both set shall be of different make ) 45 Battery Charger - 48 V Dual mode (FC+BC) (Float - 30A/Boost - 60A) - SCADA compatible, SMPS based,Suitable to VRLA Battery set and shall be able to charge Battery set as per requirement during float /boost mode as well as it shall supply to load as per rated voltage of load components inclusive of necessary power, communication and control cables with all accessories complete -Compact type 46 SCADA compatible DCDB-110 V with minimum 20 + 20 Outgoing feeders duplex type (Floor Mountable) with changeover panel having interlock facility with 20% spare feeder breakers for station control and protection systems as per the station requirement, facility shall be there to charge any battery set with any of the battery chargerwith interlock. Ratings shall be as per the battery sizing calculation. 47 DCDB 48 V with change over facility and min 20 Nos. of Distribution Outlets( 2 Nos.- 10A and 18 Nos. 6A)-DUPLEX Type-SCADA/SAS Compatible-Wall mountable 48 SCADA compatible LT 3 phase 50Hz Panel Boardwith Insulated Aluminium Bus Bar, 2 nos incomers (Auxillary Transformer / DG Set), automatic interlock/load change over facilty, two sets of outgoing,panel with LED indications, panel meters,ACB /MCCB(incomers), MCCB (feeders), Earth Bus bar etc., for LT Power Distribution to Control room/equipments including all accessories complete as perspecifications having minimum 20% spare feeders.Remote operation shall be possible for incomers and DG set.(Panel sizing and rating to be proposed by the bidder during detailed engineering for approval). 49 SCADA compatible LT MLDB/LDB/Street light control DB with Lighting Transformer, Surge Protection Devices, MCCB, MCB, RCCB, ELCB and all accessories complete as per technical specifications for Control Room and Yard lighting including all sub distribution boards, and SCADA compatible ACDB/Sub ACDB for Air Conditioners & AHU with soft starting feature etc. including MCCB, MCB, RCCB, ELCB. (The DB sizing and rating shall be proposed by the bidder, with 20% spare capacity, during detailed engineering for KSEBL approval) 50 SCADA compatible LT Emegency Lighting Distribution Board (ELDB) with 63A Incomer and minimum 12Nos 10A Outgoing Feeders and DC Emegency Lighting Distribution Board (DC ELDB) and related accessories including MCCB/MCB,RCCB/ ELCB as perstandard specifications for Emergency lighting in the substation / Switchyard, charges including all sub distribution boards 51 LT A.C Three Phase Self mounted Indoor Power Kiosk IP 42 with 1 incomer MCCB 63A including indicating lamps,single phase and three phaseindustrial type16A sockets etc. at GIS hall 52 LT A.C Three Phase Self mounted Outdoor Power Kiosk (IP 56) with 1 incomer MCCB 250A, 2 Outgoing MCCB 160A & 100A including indicating lamps,3 phase and singlephase industrial type 16A sockets etc. complete for Transformer oil filteration unit, welding purpose etc. 53 Supply of Protection Panels/Equipments, Substation Automation System and materials as per technical specifications, IS/IEC Standards applicable 54 Control and Protection panel for Transformer with Differential Protection,REF (Transformer management relay) for HV and LV [M1 and M2 relay shall be of different make / platform and each shall have-87, 67/67N, 64R-Low Impedance, Transformer Mechanical Protection- Bucholz, OLTC Bucholz, OLTCPanel Control & signal interfacing with RTCC panel, OTI, WTI, PRD1 &2 through high impedance tripping relays, MOLG Alarms etc.,] 33/110kV 60MVA, with BCU , IEC 61850 Edition 2compatible and provision for interface to SCADA system. Energy meters as per technical specifications and suitable for GIS switchgear modules 55 Busbar Protection panel for8 bays (110kV Bus) as per specifications -with zone segregated tripping, LBB, end zone protection, local HMI for displaying differential current, SLD, Isolator Position etc., with output tripping relays (drawout type) and provision for interface to SCADA/SAS system 56 Control and Protection panels (main 1 and 2- 87L,21,67/67N,50N,59,PSB, 79A/R,49,81 O/U) for 110kV Feeders with BCU , IEC 61850 Edition 2compatible and provision for interface to SCADA systemas per tech specifications and suitable for GIS switchgear modules (M1 and M2 relay shall be of different make / platform and the combination shall exactly suit with the remote end M1 and M2 relays). Over and above the normal Tri-Vector Meter, the contractor should supply SEM Meters as per SRLDC/PGCIL Standards, additionally. 57 Control and Protection panel for 110kV Bus Coupler with BCU and additional Common BCU for Auxiliary control System and Monitoring including the panel as per standard and requirement of 110kV GIS 58 Design, Manufacture and Supply of Complete SAS system for 110kV GIS , as per detailed technical specification , SAS system Architecture andSLD , Reduntant Servers, Reduntant Gateway, Reduntant Routers with Hardware Firewalls,2 Nos Operator Work Station with HMI -Desktop (one operating work station with extended HMI at Nedumkandam (10Km away)) , 2 Nos. Engineering Work Station(Lap top and Desk top) , one metering PC with DCU for SAMAST metering and Remote Station Controls, necessary Panels and Furnitures etc completewith all necessary accessories, cables,converters, GPS based Time Syncronising Unit IEC compatible to cater data to and from all bays and transformer, SCADA compatible panels,interfacing /intergating line differential relay in CR panel, SAS gateway server panel etc to FODP/Communication equipment in communication room as per specification, including supply of all necessary converters for interfacing with the communication equipment , unarmoured OF cable , 40mm PLBHDPE pipe duct , all interconnecting cables , Patch chords devices etc. complete. The scope include integrating 33kV and 11 kV systems.SAS Architecture should be suitable for plug and play integration of future bays. [Including mandatory Spares as specified in volume 2 - Technical Specfications, Chapter 11, Annexure C] 59 Design, Manufacture and Supply of materials / item for Power Cable, Control Cables and instrumentation cable, Supply of various sizes of 1.1 kV FRLS-0H PVC armoured copper cable for control , Aluminum/ Copper LT power cable as per approved cable schedule (to be prepared by contractor and got approved), and provision of all types of cables from Power and Auxilliary Transformer and other equipments/switchgears, for the substation (Aluminium cables of size 185 mm2 and above shall be XLPE type) includingties , tags etc. supply of suitable size PVC pipe and accessoriesfor drawing exposed cables as per the technical specifications, IS/IEC Standards applicable. 60 12x4mm2 Control CableCopper 61 4x6mm2 Control CableCopper 62 4x4mm2 Control Cable Copper 63 2x4mm2 Control Cable Copper 64 19x2.5mm2 Control CableCopper 65 12x2.5mm2 Control Cable Copper 66 7x2.5mm2 Control Cable Copper 67 4x2.5mm2 Control Cable Copper 68 3x2.5mm2 Control Cable Copper 69 2x2.5mm2 Control Cable Copper 70 2x1.5mm2 Control Cable Copper 71 4x0.5mm2 instrumentation Cable Copper 72 4x10mm2 PVC InsulatedLT copper cables 73 2x10mm2 PVC Insulated LT copper cables 74 2x1.5 sq.mm or higher size PVC Insulated shielded copper cables for Transformer OTI & WTI wiring 75 20/25 mm dia FRLS PVC Rigid/Flexible Conduit including all clamps, clips etc. for Fire Alarm Panel and sensor wiring purpose 76 3 1/2C x300 Sqmm 1.1kV LTXLPE insulated armoured Aluminium cable 77 3 1/2C x 240 Sqmm 1.1kV LT XLPE insulated armoured Aluminium cable 78 3 1/2C x 120 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 79 3 1/2C x 90 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 80 3 1/2C x 70 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 81 3 1/2C x 50 Sqmm 1.1kV LT XLPE insulated armoured Aluminium cable 82 3 1/2C x 35 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 83 3 1/2C x 25 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 84 4C x 16 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 85 1x 95 sqmm DC cable (stranded and flexible) NFPA category FRLSLH Copper Cable for battery. 86 1x 70 mm2 DC cable (stranded and flexible) NFPA category FRLSLH Copper Cable for battery. 87 1x35 mm2 DC cable (stranded and flexible) NFPA category FRLSLH Copper Cable for battery. 88 Supplying aluminium cable tags with punching number and alphabets up to 7 digits or higher as per requirement for 220/33/11kV power cables including cost of all materials as per the technical and standard specifications 89 Hot dip galvanized ladder type cable tray with joint plate and N&B size300x100x2 with all accessories complete 90 Hot dip galvanized ladder type cable tray with joint plate and N&B size 450x100x2and with all accessories complete 91 Hot dip galvanized ladder type cable tray with joint plate and N&B size600x100x2 and with all accessories complete 92 Design, Manufacturere, Testing at Manufacturs works, transporation and Delivery of the Conductor/ Earthing Materials and associated materials for Gas Insulated Substation as per technical Specifications and IS/IEC Standards applicable 93 Aluminium Bus bar 120*10mm 94 ACSR Wolf Conductor 95 110 kV 90kN Silicon Composite Longrod Insulator 96 110 kV 70kN Silicon Composite Longrod Insulator 97 110 kV Single Tension H/W and Accessories suitable for Single Wolf 98 110 kV Single Suspension H/W and Accessories suitable for Single Wolf 99 wedge – connector suitale for wolf/Kundah 100 wedge with paddlesuitale for wolf/Kundah 101 Earth Wire 7/3.15 mm Galvanised Steel wire with required hardwares accessories and earthbond 102 Tension Clamp and Tail Clamp for 7/3.15 mm Earth Wire 103 32/40mm MS rod for earthing 104 GI strip all sizes as per requirement for earthing 105 Clamp and saddle for GI strip/wire 106 Test link for lightning protection 107 1.5m GI lightning spike with fixing clamps 108 Design and supply ofVentilation system for GIS hall(positive pressure type)with prefilters and fine filters of washable type for 100% capacity of GIS hall, with air displacement of 5 times the volume of GIS hall per hour (one operating + one standby , consisting of two units each having capacity 5 times air changes per hourof GIS hall workingcyclically for 50% of time)with soft starting feature,comprising of GI ducts( with provision for nitrile rubber insulation if taken externally), fire dampers, exhaust dampers, grills, noise reduction system etc. complete.The system shall be monitored via SCADA including necessaryelectrical panels. 109 Design, Manufacturere, Testing at Manufacturs works, transporation and Delivery of the Fire and Safety Equipments and materials for 33/110kV Gas Insulated Substation as per technical Specifications and IS/IEC Standards applicable- Portable and wheel/ trolley mounted fire extinguishers for Control room 110kV GIS Hall, 110kV Switchyard Relay panel room of GIS Hall,Transformers and other Strategic locations including its installation at site 110 Dry chemical powder of 9kg capacity 111 Dry chemical powder of 25kg capacity 112 Dry chemical powder of 50kg capacity 113 CO2 gas type of capacity 6.5kg 114 CO2 gas type of capacity 22.5kg 115 Mechanical foam type capacity 9LT 116 Mechanical foam type capacity 50LT - 117 Fire Stand with 4 buckets(Including Concreting as per drawings) 118 SCADA compatible - Main Fire Alarm Control Panel (Zone of protection as per approved scheme) complete with Charger, Rectifier, Visual Display, battery back up complete as per the station requirement 119 Photo Electric type Smoke detector with base compatable for Fire Alarm Panel 120 Photo Electric type Heat detector with base compatable for Fire Alarm Panel 121 Supply of Beam Detector and Reflector for GIS with base compatable for Fire Alarm Panel 122 Audio Alarm with Hooters cum Speakers compatable for Fire Alarm Panel 123 Manual Call point of Break Glass Type with hammer and chain 124 Insulating Mat (Size 2000x1000x2mm) class A including its fixing at site as per Technical Specification and IS 125 Safety Chart for First Aid, Electric Shock & Fire and Fire Fighting Equipments including its fixing accessories complete 126 Lighting and General / Miscellaneous Items 127 Optical Fibre Cable (12F Single Mode and 12F Multimode) , SM and MM Patchcords, all necessary connectors complete, as per site requirement for extended HMI, bus bar protection other than SASas per site requirement and technical specification 128 Ground Enhancement Material (GEM) ( Per Bag -11.33 Kgs ) - Conforms IEC 62561-7 Standard. The GEM shall have Resistivity of less than 20 Ohm-cm and Environmental friendly 129 Visual Monitoring System (VMS) with surveilliancecamera as per technical specification and layout drawing (Including local PC monitoring set up having sufficient storage capacity, remote end PC monitoring if necessary set up shall be in the scope of supply) including necessary power and communicationcables, interconnecting hardwares, PVC pipes and all other accessoriesetc complete as per the technical specifications (minimum requirement : Fixed Camera : min 8 Nos, Pan Tilt Zoom Camera : min 2 Nos, Fixed Variable Focus: min 4 Nosand storage >8TB) 130 Design of Air Conditioning system and Supply of5 Star rated (as per latest BEE notification)2TR or higher capacity split type inverter Air Conditioners, with stabilizer, Power Isolator etc.for Control & Relay panel room, Communication room, SCADA room, Bay Control Room (each room has got minimum one unit of redundancy, cyclically operated with Room temperature indicator) as per detailed engineering and approval. Temperature indicators shall be integrated to SCADA 131 SPARES for GIS - 220/110kV 132 Tripping & closing coil(Each Breaker type Module) 133 Motor for disconnector of each type of equipment 134 Motor for CB spring charging (each Breaker Type) 135 SF6 Pressure Guage for Circuit Breaker 136 SF6 Pressure Guage for other compartments 137 SF6 Pressure Relief Device 138 Auxillary contact assembly for Circuit Breaker 139 Auxillary contact assembly for Disconnector/Isolator-each type 140 SF6 gas 141 Moisture absorbant catridge 142 NRV gas filling valve for equipment 143 Indication lamps and lamps for semaphores & annunciators- one for each type & colour 144 Annunciator full set each type with one set of relay card 145 Special tools for Installation and Maintenance -220/110kV 146 Gas Leakage detector - DILO make 147 Special spanners for General maintenance for supplied GIS 148 SF6 gas bottle locking , measuring and filling assembly with whole hose 149 Measuring Instruments 150 Clamp on meter- capable to measure mA range .• High sensitivity, miniature AC/DC clamp meter.Range: 200mA/2/20A AC, 2/20A DCMin. resolution for AC: 0.1mAMin. Resolution for DC: 1mAJaw size: 7.5mm all required accessories from following make and model Fluke,MEGGER,KYORITSU 151 Phase Sequence meter with Standard accessories -Fluke,MEGGER,KYORITSU 152 Digital Multimeter 279FC TRMS Thermal or advancedFluke,MEGGER Model 153 Analog Multimeter, with Standard accessories - Fluke,MEGGER,KYORITSU 154 SF6 gas Analyser including DEW point,purtity & Hygrometer etc.
Contract Date: Apr 01, 2026 Contract Value : ₹ 369.42 Crore
Boards / Undertakings / PSU No of Bidders 8
Kerala View Result →
19.
Educational and Research Institute #9832816 AOC
PROCUREMENT OF MACHINERIES, INSTRUMENTS, TOOLS AND EQUIPMENTS ETC. RELATED TO ELECTRICAL ENGINEERING AND ELECTRONICS AND TELECOMMUNICTION ENGINEERING LABORATORIES AND WORKSHOPS OF MATHABHANGA GOVERNMENT POLYTECHNIC, MATHABHANGA, COOCH BEHAR, WEST BENGAL- 1 ANALOG ELECTRONICS LAB-I (3RD SEM) 2 50 MHz Dual Channel CRO• Automatic Measurements of Signal Parameters like .Pk-Pk, Average, Max. , Min., rms, top etc. Voltages and Frequency, Period,Width,Duty Cycle, Rise Time, Fall Rime • Waveform and Set up storage facility.• Colour Display. • Advanced features like sequential acquisition of up to 1000 trigger events should be possible.• Standard USB Host & Device Connectivity. • Standard 23 Automatic Measurement andMath Function Including FFT.• Education student Lab guide and professor slide set.DETAILED TECHNICAL SPECIFICATIONS:-a)No. Of Channels:2b)Bandwidth :50 MHzc)Maximum Input:400 V (peak ac + dc) d) Sample Rate :1 GSa/sece)Waveform Update Rate : 400 Waveforms/secf)Memory : 16 Kpts/Ch.g)Time Base : 5nsec / div. To 50 sec./div.h) Resolution : 8 bitsi) Display: 5.7 inch Colour QVGA TFT LCD Display.j)Trigger Modes: Force, Edge, and Video, Pulse width.k) Built In Interface : Standard USB 2.0 (Host and Device)l)Power Supply: 230 V AC Supply, 50 Hz. 3 Function Generatori)Itshould be a waveform / function generator which can be upgraded to an arbitrary waveform generator . It may also have the feature upgrade the frequency of operationii) Should have low harmonic distortion and jitter.DETAILED TECHNICAL SPECIFICATION:--• Frequenc : 1Hz. to 20 MHz for Sine , Square and PulseWaveforms and 1 Hz. to 20 MHz. for Noise• No. of Channels: 1• Frequency Resolution : 1Hz.• Amplitude : 1 mVpk-pk to 10 v (pk - pk) in 50 ohms. • Duty Cycle for Pulse : 0.01 % to 99.99 %• Standard Waveforms: Sine,Square,Ramp,Pulse,Triangle,•Operating Modes: Continuous,Modulate,. .• Modulation Types: AM,FM,PM,FSK,BPSK,PWM• AM : Source both Internal & External, Depth 0 to 120 %With 0.01 % resolution.• FM : Source both Internal & External, Deviation 1Hz to 15 MHz• PM: Source both Internal & External, Deviation 0 to 360 deg C.• PWM : Source both Internal & External. Deviation 0 % to 100 %.• Power Supply : 230 v,50 Hz. ac. 4 Digital MultimeterDC Voltage:400mV to 1000V , AC Voltage: 400mV to 1000V,DC Current: 4mA to 10A, AC Current: 4mA to 10A, Resistance: 100 ohm to 40Mohm, Resistance: 100 ohm to 40Mohm,Capacitance: 4nF to 200µF, Duty Cycle: 0.1% to 99.9%, Frequency: 10Hz to 10MHz, Temperature: 20oC to 750oC,Transistor Test: Yes (for NPN & PNP), Diode Test: Yes, Continuing Buzzer: Yes, Power Supply: 9V, Manual and Auto ranging,Display: 4½ Digit 5 To study the V-I characteristics of UJT Trainer kitVariable DC Power Supply 1.2V to 12V/500m,A DC Power Supply for DPM 5V/500m,A UJT (2N2646) UJT Characteristics UJT Relaxation Oscillator with two different Timing Capacitors ,DigitalMeters for Measuring Voltage and Current ,Set of Patch Chords & User Manual 6 To study the input and output characteristics and to find the h-parameters of a BJT for : —(a) C-E configuration,(b) C-C configuration,(c) C-B configurationHARDWARE SPECIFICATIONS :Dual Variable DC Power Supplies 0V to 12V/500mA and0V to 15V/500mA DC Power Supply for DPM 5V/500mAIndependent Base Limiting Resistors - 2 Nos.(low value) Independent Collector Resistor - 1 No. Transistor( NPN Type SL100) .All Inputs/Outputs through 2mm Sockets set with provision of Digital Multimeter for measuring input and output. 7 ANALOG ELECTRONICS LAB-II (4TH SEM) 8 Feedback Amplifier Trainer12 V DC supply with +/- 10%accuracy,configurable circuit,Inbuilt sine wave generator with frequency range 10 Hz to 10 KHz rangeand Amplitude variation 10mV to 4V, NPN transistor. Voltage Series & Shunt and Current Series & Shunt configurable operation. 9 Oscillator Trainer KITi) Hartley, Colpitt ,Wien Bridge Oscillator Trainer kit : i) NPN Transistor ii)On boardoscillator section,separate tank circuit (iii)Biasing Voltage :+12 V , -12 V ,+12V SMPS Adaptor provided with the trainer for power supply.Designed by considering all the safety standards. Provided with an extensive manual.Power Supply to Kit: 230VAC,50Hz, All interconnections are made using 2mm banana Patch cords 10 To determine the following characteristics of op-amp: —a) input offset voltage, b) slew rate, c) non-inverting gain, d) inverting gain e) adder, f) subtractor, g) differentiator, h) integratorandi) voltage followerTo adjust offset null, setup the closed loop amplifier using IC741 op-amp also to (a) dc gain (b) ac gain. The set complete with +/-12V DC regulated power supply with milli voltage source, Null arrangement and 2V/20V dual range digital voltmeter , In built sine wave,triangular wave & square wave Generator of1 KHz, 15V Vpp (approx.), DC Power Supply : 0 - 5 V (vary through (2No.) rotary switch for specific voltage level 11 DIGITAL ELECTRONICS LAB (3RD SEM) 12 Complete setup to implement encoder, decoder ,multiplexer andde-multiplexer5V D.C. at 100mA, IC regulated power supply,21 Input Switches for data input,IC For Multiplexing 74150 is provided on board with Combinational Circuit, IC For Demultiplexing 74154 is provided on board with Combinational Circuit, One Not Gate is provided on board using 7404 ,16 Output LEDs with driver circuit to observe the output of Multiplexer Demultiplexer, A Pulser to provide the pulses manually for triggering,230 V ±10% at 50 Hz A.C. Mains,necessary patch cords and user mannuals. 13 Complete setup to design / construct parity generator, checker andcomparatorDC Regulated Power Supply 5 VDC/150 ma,5 SPDT switches provided for selecting logic ‘1’ & logic ‘0’,2 output indicators,Sufficient no of 4mm Patch Cords for Interconnection,Power Cords 230v, 50Hz,necessary patch cords and user mannuals. 14 Complete setup to design / construct binary synchronous and asynchronous counterTrainer kit for binary Synchronous and Asynchronous counter. with power supply, display unit, patch cords, manuals and necessary IC. 15 Digital I.C TesterUniversal IC tester: 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display, suitable for testing of Analog IC, Digital IC and 7-segment display. 16 A/D & D/A Converter TrainerFEATURESAnalog To Digital Converter• 8-bit descrete ADC•12-bit monolithic ADC IC•On-board signal generator with adjustable amplitude levels•On-board LED bank to observe digital outputs•Power supply : +5V, ±12V GND•Interconnection is provided by 2mm connectors•Experimental manualDigital To Analog Converter•8-bit binary weighted resistors DAC•8-bit ladder type D to A converter•8-bit D to A converter using monolithic IC•Simple construction using Op-Amp and resistors•Onboard switches are provided for digital pattern generation•8-bit digital inputs ranges from 00 to FF•Variable frequency counter to study the settling timeSPECIFICATIONS•8-bit binary weighted and 4-bit ladder type DAC are constructed using discrete components•8-bit monolithic DAC having settling time in the range of ns, wide power supply range, low power consumption, full scale error ± 1LSB•8-bit digital ramp ADC constructed using discrete components•12-bit monolithic ADC having conversion time in the range of μs, industry standard pin out, wide input range•8 onboard switches to provide digital inputs to DAC•8-bit counter running on external clock frequency to study settling time of DAC• Built inlow frequency clock generator•1 KHz sine wave with adjustable amplitude level•Onboard variable DC voltage source for studying unipolar and bipolar modes of ADC •12 output LEDs to observe ADC outputs•ADA operates on DC power supply (+12V,-12V,+5V and GND)•Interconnection is provided by standard 2mm connector•Extensive experimental manual is provided with the kit EXPERIMENTSAnalog To Digital Converter• To study and measure resolution of ADC•To measure the conversion time of the ADC•To study full scale adjustment for unipolar and bipolar signals•To study the working of ADC 17 NETWORK ANALYSIS LAB ( 3RD SEM) 18 To study the series and parallelresonant circuitIndependent Resistors - 3 Nos. ,Independent Capacitors - 3 Nos.,Tapped Inductance. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User ManualWITH SIGNAL GENERATOR, COUNTER, DIGITAL METERS FOR INPUT & OUTPUT and user manual 19 To test and to measure the cut –off frequencies of the following: —(a) constant k-type low pass filter;(b) constant k-type high pass filterTwo Independent Passive LC Filter Networks (LPF & HPF) All Inputs/Outputs through 2mm SocketsSet of Patch Chords & User Manual 20 To study standing wave pattern for a transmission line of finite length with:(a) open termination,(b) shorted termination andmatched termination. 2.To measure the attenuation constant and phase shift constant for matched terminationTransmission Line Trainer Features:* 30-300 Mhz sweep source with detector* Calibrated attenuator* Displays standing waves/maxima-minima on CRO* Uses actual coaxial lines rather than simulated ones.* Impedance matching.* Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR.* Measure parameters of 50, 75 and 300 Ohms cables* Study Time Domain Reflectometry.* Study location and nature of discontinuities,Open/short, mismatched terminations, etc.* Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior.Technical Specifications:A. Frequency Domain AnalyzerFrequency range : 30-300 MHz typical LCD Display. Level : 100mV p-p Attenuator 50 Ohms : 0.5, 1, 2,4, 8,15 dB,Output Impedance : 50 Ohms Scope out : X-Y output to scopeB. Resistive Impedance Analyzer ,Characteristic Imp. : upto 800 ohms ,Display : LCD C. Time Domain ReflectometerPRR Short range : 10MHz typical,Pulse width : <10ns typical, PRR Long range : 100KHz typicalAmplitude : 1V nominal, Output Impedance : 50 OhmsAccessories:Lengths of 50 ohms and 75 ohms coaxial cable, 300ohms, parallel line, lossy line, Tee connectors, ,Standard load of 50and 75 ohms, Various capacitive and inductive loads, shorts, Balun 1:1 & 1:4, Operating manual, Mains cord 21 COMPUTER PROGRAMMING LANGUAGE LABORATORY (3RD SEM) 22 Computer Programming Language LaboratoryTURBO C++ Software 23 MICROPROCESSOR LAB (4TH SEM) 24 8085Microprocessor Trainer KitHigh performance 8085A CPU operating at 3 MHz.16 K powerful monitor FIRMWARE expandable to 32 K. 64 K user RAM. Expanded RAM accessible using bankWrite protect facility for RAM. 3.6 V Ni-Cad battery back up. Versatile Keyboard/Display controller using 8279. 24 highly reliable dual function keys. 6 digit seven segment LED display.Parallel I/O lines available through two 8255 chips. Serial I/O through 8251 USART, with on-board level shifters 1488,1489.Programmable communication parameters. Built-in audio cassette interface.3 channels of 16 bit timer/counters from 8253.Powerful 8085 interrupt capabilities. On-board EPROM programmer with ZIF socket for programming 2716 to7512 EPROMs and various EEPROMs. Normal and intelligent programming modes.On-board ADC,DAC, opto-isolator, reed relay and miniature speaker. On-board logic probe.Single stepping, break pointing and machine cycle single stepping facility. Monitor functions can be called through software interrupts. Large collection of application software provided. All address, data and control lines from the CPU, buffered and brought out on 50 pin connector. Additional Stepper motor of specification:Shaft type: 5 mm DCurrent rating: 1200 mA2Voltage rating: 4 VHolding torque: 44 oz·inSteps per revolution: 200Resistance: 3.3 Ohm2Inductance per phase: 2.8 mHNumber of leads: 6Lead length: 30 cm 25 Microprocessor 8086 Trainer KitINTEL 8086CPU AT 4.77 MHZ CLOCK SPEED,16KB for monitor EPROM upgradable to 64kb16KB RAM expandable to 64KBBattery backup provision for RAM upto 64KB16 x 2 (or) 20 x 4 Alphanumeric LCD display101 keys IBM compatible keyboard24 TTL I/O lines brought out to two nos., of 26 pin FRC connector1 number of standard RS232C compatible serial port brought out to a pin D type male connector.3 channel 16 bit counter/timer using 8253.Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB seriesof experiment boards and bus expansion.8 no’s of interrupt lines are terminated at a 10 pin connector.Kit operates with a single +5V/DC supplyThe kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover.Built-in line assembler & DisassemblerPowerful debugging monitor to develop user program. 26 ELEMENTARY COMMUNICATION ENGG. LAB 27 To study the amplitude modulation and demodulation Ttrainer kit Features of Amplitude Modulation and Demodulation Trainer:On-board message signal with variable Amp/Freq On Board carrier signal with variable Amp/Freq AM Modulation using MC 1496 IC Demodulation using Diode Detector and LPF,6th Order LPF,Op Amp Based Variable AmplifierInternal Power Supply +5V , +12V/ 500 mATechnical Specification :Message Signal:Sine wave Frequency 100 Hz to 2.8 KHz, Amplitude 0 to 3VCarrier Signal: Sine wave Frequency-28 KHz to 108 KHzAmplitude 2V,Modulation : Balanced ModulatorAmplifier : Op Amp BasedDemodulation : Diode Detector & LPFLow Pass Filter : 6th Order LPFSupply Voltage (Board) : +12V, +5V / DCSupply current : 100 mA (Minimum)Input Voltage : 230 V/ 50 Hz ACInterface connectors : 2mm socket 28 AM/FM Radio Receiver kitFrequency range: 400KHz ~ 1.5MHzIntermediate frequency: 455KHzInputs: RF signalOutput IF frequency: 455KHz adjustableIF filter: Dual tune LC, RF amplifier with variable gain ,Mixer (frequency converter),Local oscillator:Output Signal: Sine waveFrequency range: 400KHz ~ 1.5MHz ,Amplitude: Adjustable from 0Vpp ~ 2VppOutput impedance: 50 Ohm ,1st and 2nd IF amplifierCentral frequency: 455KHz, Load impedance: Variable R-L-CGain: 40db with automatic gain control, Diode envelope detectorDetection of the envelop with variable RC filter. Audio output:Amplifier with audio jack, Audio amplifier gain: 26Db, Receiving media :MW coil antennaFM radio receiver, Reception range: 88MHz ~ 108MHz with continuous tuningTuning circuit: Using GANG capacitorIntermediate frequency: 10.7 MHz with ceramic filterEXPERIMENTS:Study of double sideband AM reception using envelope diode detector,Study of single sideband AM reception using product detector,Study of image frequencies,Study of adjustment of receiver tuned circuits,Voice reception using DSB/ SSB AM receiver (super heterodyne receiver)Effects of switch faults FM detection output level: 77.5Vrms (typical)FM detection output distortion factor: 0.3% (typical)Audio amplifier: Gain up to 46DbReceiving media: Adjustable telescopic antennaPower supply: -12V,+12V,+5V,GNDOutput volume regulation, output load impedance of 8 OhmEXPERIMENTS AM radio receiverTo study AM radio receiverTo study of image frequencies for AMFM radio receiverTo study FM radio receiverTo measure the frequency response of Audio amplifier 29 Pulse code Modulation and Demodulation system trainerInbuilt variable DC and 1 kHz AC Modulating Signals, Facility for applying external AC or DC Modulating Signal, Modulating circuit consists of a Positive Clamper, Sample and Hold (S and H), Analog to Digital Converter (ADC), Parallel to Serial Converter and Control Signal Generator, Observation of binary coded analog information by the LED status for both Modulation and Demodulation, PCM Modulation technique using IC, Built-in Pulse Code Demodulation circuit using a Serial to Parallel Converter and Parallel Shift Register DAC, Low Pass Filter for both AC & DC, Observation of Modulated & Demodulated waveform, Provision to monitor output on CRO, Clock to be provided from the Pulse Code Modulator to Demodulator circuit, Built-in IC based DC Regulated Power Supply with indication for power ON & fuse, 4 mm Patch Cords – 4 nos, Supply required 230V, 50 Hz and 1 phase AC, Comprehensive instruction manual complete with theory and operating details. 30 Frequency Modulation andDemodulation kitFM Modulators :Audio Oscillator : Sine wave (10Vpp adjustable) Frequency (300 Hz - 3.4 KHz) FM Modulators : 3 nos. • Reactance Modulator : Carrier Frequency - 455 KHz (± 3KHz) Varactor Modulator : Carrier Frequency - 455 KHz (± 2KHz) VCO Based Modulator : Carrier Frequency - 10 KHz - 200KHz (adjustable) ,Mixer / Amplifier adjustment FM Demodulator:Detuned Resonant DetectorQuadrature DetectorFoster-Seeley DetectorRatio DetectorPhase-Locked Loop Detector (IC HEF4046 based)Phase-Locked Loop Detector (IC LM565 based), Low Pass Filter : 3.4 KHz Cut off Frequency Amplifier (with adjustable gain) 31 DPCM & ADPCM MODULATION / DEMODULATION KITDPCM & ADPCM MODULATION / DEMODULATION KITOn Board Signals:. Frequency: 500KHz, Amplitude: 0 to 4 v pp 32 CONSUMER ELECTRONICS LAB (4TH SEM) 33 Black & White TV Trainer kit with provision of fault findingSystem: CCIR-B, 625 lines, Power supply :230V Ac, 50 Hz, Regulation range170v Ac to 270v Ac.,Power consumption :70 watts,Gain Limited sensitivity:55 dB for Video & 25 dB for AudioSound output :2.0 watts maximum. Screen size :20 Diagonal. Channel :VHF 2 to 12, UHF 21 to 68,S-band and Hyper-band. Isolated shockproof chassis. Sections:Electronic tuner, VideoI.F Section, Sound I.F, Video amplifier, Horizontal oscillator, Horizontal driver and EHT, Verticaloscillator, and output, S.M.P.S power ,Controls: Volume, tone, Brightness, contrast. Distortion :10 to 15% in Live program due to expanded P.C.B. All parts are soldered on Tags on SINGLE PCB of size 19x15” with complete circuit diagramSCREEN PRINTED in different colors with FAULT CREATING FACILITIES to create more than 25 faults. Standard Accessories : 1. Frame with PCB mounting.2. Picture tube fitted in wooden cabinet 3. A Manual having 20 practical. 34 DTH TV and SET TOP BOX TRAINER KITPower supply 230 V ,50 Hz, Input frequency: KU Band, Output frequency: 950-1450 Mhz.Noise temp: 35 degree,DISH ANTENA ,LNBIF FREQUENCY: 70 MHz 35 Colour TV Trainer with provision of fault findingStandard : CCIR-B-PAL-G, 625 Lines Channels : 230, 2 - 4 VHP I (VL), 5 - 12 VHP III (VH), 12 - 100 : BAND IV & V, else : S BAND & HYPER BAND Picture Tube Size : 36 cms. Diagonal RF Input Impedance : 75 W (Ohm) 36 DIGITAL & MICROWAVE COMMUNICATION ENGG. LAB 37 Spectrum AnalyzerFrequency range:9 KHz to 26.5 GHz,Phase noise :-102dBc/Hz, Max third order dynamic range, 1 GHz: 111dB, Displayed average niose level,1GHz:-163dBm,Standard attenuator range/step:50dB/10dB,70dB/10 squaredb,Overall amplitude accuracy:+/- 0.50dB 38 Antenna Trainer 86 - 860 MHZSPECIFICATIONS:Radiation pattern plotting software• Stepper motor controlled receiver stand.Antenna Measurement System:RF Source•Source types :PLL Synthesized with integrated VCO• Frequency range :100MHz to 3GHz• Dynamic range :85dBm• Transmitted power min:-50dBm• Transmitted power max:+5dBm • Impedance :50W / SMA RF Detector• Detector type: logarithmicdetector• Frequency range : 1MHz to 8GHz• Resolution: 0.1dB• Dynamic range : 85dB (±3dB)• Noise level : -90dbm• Impedance: 50W /SMA• Representation of RF level : dBmDisplay•128x64 Graphic LCD Display with backlit. Keypad•15 Key Membrane Keypad for user entry.Stepper motor controller•1.80 Resolutions.List of Standard 22 Antenna Suppliedwith the setupWire Antenna1.Monopole Plane base ground2.Dipole (2nos.) 3.Yagi4.Folded Dipole 5.Vee Dipole6.Rectangular Loop 7.HelicalMicrostrip Antenna 1.Planar Dipole 2.Planar Monopole3.CMSA 4.TMSA5.2X1 ARRAY 6.Annular ring7.Chip Antenna8.RMSA9.RMSA- Circular PolarizedAperture Antenna 1.E- Horn2.Open ended Waveguide Rectangular Array Antenna 1.Broadside Array2.Collinear ArrayReflector Antenna 1. Corner reflectorSOFTWARE• Radiation pattern plotting and analysis software suitable for windows environment Antenna PositionerThe Transmitter and Receiver Antenna stand is made of special material which is inhert to EM frequency and it has engraved height and angle scale on It. It has facility to adjust the height and level. Universal plug and fix Antenna mounts are provided to hold the antenna assembly in vertical and horizontalorientation for co and cross polarization.ACCESSORIES • SMA (M) to SMA (M) 50W flexible cable : 02nos• USB cable ( Male A to Male B): 01no• 3 Pin 6 Amp Power chord: 01no • Manual : 01no • Software on CD: 01no EXPERIMENTS• Measure the variation of field strength /inverse square law• Prove the reciprocity theorem of antenna• Plot Radiation pattern of WIRED Antenna Omni directional antenna• Plot Radiation pattern of all Aperture Antenna• Plot Radiation pattern of all Reflector Antenna• Plot Radiation pattern of all Array Antenna• Measure co-polarization, cross polarization 39 Microwave Test Bench (KLYSTRONBased)Klystron Power Supply: Specifications:Input Voltage -230V+/- 10%, 50Hz AC, Beam supply- Voltage:200-450V continuously variable; Current:Regulation: better than 0.5% for +/-10% variation in mains supply voltage; Ripple: less than 5mV rms ,Repeller Supply -Voltage:-10V to -270V continuously variable with respect to klystron cathodeRegulation: better than 0.25% for +/-10% variation in mains supply volt , Heater Supply - 6.3V DC (regulated)Modulation- Square Wave : Frequency 500Hz to 2000Hz; Max. Amplitude- +110V peak to peak, Amplitude and frequency continuously variable; Sawtooth- Frequency 50Hz to 150Hz; Max. Amplitude- 60V peak to peak, Amplitude and frequency continuously variable.VSWR Meter: (Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Power : 230 Volts AC, 50Hz, mains supply) 40 ASK / PSK / FSK Modulation And Demodulation KitFEATURES•VLSI based design •Separate component and operational area •Acrylic cover for component safety •Modular organization of circuit functions •Test points to access signals at every stage of circuit operation •Multimedia based interactive e-manual Data Simulator: Onboard 8-bit variable NRZ-L pattern,Crystal Oscillator: 32.768 MHz,Data Clock: 256 KHz,Data Format: NRZ (L),Onboard Carrier Sine Waves : 1MHz (0°), 1MHz (180°), 500 KHz (0°),Power Supply: +12V, -12V, +5V, GND. 41 Microwave Test Bench (GUNN Based)Gunn microwave test bench:Gunn Power Supply (0 - 12 Volts variable,1 Amp. Max,Modulation Frequency: 1KHz +/- 10% (900-1100 Hz),Output Connector: BNC(F) for Gunn Oscillator & TNC(F) for Pin Modulator,Modulation: Square Wave, Frequency : 500Hz to 2000Hz)• Gunn Oscillator • Isolator• PIN modulator• Variable attenuator • Detector Mount• SWR meter(Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Powe : 230 Volts AC, 50Hz, mains supply) 42 1 GHz spectrum Analyser1 GHz spectrum Analyser with tracking generatorFrequency range: 150 KHz to 1000 MHzFreqency Resolution: 1 KHz CF entry 40 Hz sweep resolution at 2 KHz per Division,Frequency Display: 61/2 digitFrqency Control: Digital Phase LockResolution Bandwidth: 3 KHz, 30 KHz, 220 KHz, 4 MHz. 43 INDUSTRIAL ELECTRONICS LAB -I (5TH SEM) 44 Trainer Kit to study Reverse Recovery Characteristics of Power DiodesThe single Board trainer Kit should contain IC Regulated Power Supply, Different types power diodes, Digital Ammeter and Voltmeter and other necessary passive components 45 To study drive circuit of SCRIsolated 230 V/40 W AC Power Supply1.2 V to + 15 V/500 mA DC Power Supply* 0-18 V/500 mA,50 Hz, AC Power Supply* Variable frequency triggering pulses* DC Gate signal control, Pulse gate signal * Synchronous AC gate control signal through DIAC* UJT Triggering* 10:1 On- board resistive attenuator * Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 46 To study a single phase rectifier—output waveform with phase control circuitTrainer Kit to study Single Phase Full wave Bridge Rectifier for fixedDC output, Half Controlled and fully controlled rectification facilities with R and RL, loads 1000 Ohms 10 Watts, 14 ma @ 0.05 A inductive loads.The Single Board Trainer Kit contains :(i) Source for rectification of 4 to 24 V DC fixed and variable output @ a max of 500 ma helps to construct and study Series and Parallel resonance Circuit.(ii) Four Diodes and 4 SCRs in bridge configuration with gradual firing controls and necessary capacitive, inductive and Pie filter components.(iii) Digital Ammeter and Voltmeter. 47 To study a polyphase rectifierIsolated 230 V/40 W AC Power Supply Isolated stepped down 3 PH supply. * 3 Phase diode rectifier in open condition*Provision for Load& CRO output.* Electronic phase sequence finder.*Set of Patch Chords & user Manual 48 INDUSTRIAL ELECTRONICS LAB-II (6TH SEM) 49 Servo Regulator Stabilizer Study Kit500VA Servo stabilizer , 2 Amp Variac, Digital input & output meters, Lamp load, Set of Patch Chords & userManual. 50 To study a Jones chopperIsolated 230 V/40 W DC Power Supply, + 5 V/500 mA DC Power Supply* SCR Jones chopper* Gate firing pulses for Jones Chopper* 10:1 On-board Resistive Attenuator* Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 51 To study speed control of induction motor by voltage and frequency variationV/F CONTROLLER 1 HP, AC SQ. CAGE IND. MOTOR 1 HP,DIGITAL VOLT & AMMETER. 1 PHASE I/P & 3 PHASE O/P,3 PH & 1PH MCB PROTECTION 52 To study the speed control of DC motor by:(a) varying field current keeping armature voltage constant; and,(b) varying armature voltage keeping field current constant DC SHUNT MOTOR (FULL COPPER WINDING) .5 HP WITH BASE MOUNT FRAME 1 No VARIAC CONTROLLED 2 DC POWER SUPPLY ( 1 FOR FIELD & 1 FOR ARMATURE)DC VOLT & AMMETER DIGITAL………4 NosPANEL MOUNTED RPM METER………1 No.WHITE BAKELITE FRONT WITH CONN. DIAGRAM & WOODEN SAFETY BOX.METAL FRAME TABLE (Ply board with sun mica) CUM STAND FOR PANEL 53 Power Electronics Devices Trainer KitShould have Built in power supplyDC supply : +/- 12V, 500mA,Power supply 17V / 750mA,Regulated 13.5V/3A O/P mustbe provided as 12V Battery charging supply. Isolated DC supply +12V/ 300mA with isolated common.On board Inverter transformer of Primary : 230V & Secondaries 12-11-0-11-12/3AOn board Lamp load of 15W (100W) should be provided.AC supply : 230V AC line voltage must be made available on two banana 4mm socketsMust have Two pulse transformers of 1:1:1 are provided for isolation & supplying firing pulsesalong with required DC Power supply to experiment panel under test through 15 pin female ‘D’connector.R-L-C Load PanelMust have Load resistor of 10W / 40W --- 1no.Must have Centre tapped 3A choke 4mH/ 16mH each ----2nos.Must have Commutation capacitors of 10mF/100V -------4nos.Must have AC Paper capacitor of 4mF/440V ---1no. 54 PLC Trainer (EXPERIMENT 1-Use of simulation package for different function of PLC. EXPERIMENT 2- Verify function of logic gates by using PLC. EXPERIMENT 3- Write and verify ladder program for motor ON-OFF Control with two push button)HARDWARE SPECIFICATION:TTL Input Switches : 8 Nos,TTL Momentary Switches : 8 Nos., Proximity Switch : 1 No.,Optical Transducer (two state) : 1 No., Programmable LEDs : 8 Nos., Analog input 0 to 5V DC : 8 channels, Analog output 0 to 5V DC : 1 No., 4 to 20mA Transmitter : 1No., 4 to 20mA Receiver : 1No., Current Meter : 25mA FSD 1No.,Voltmeter : 10V FSD 1 No., Piezo Electric Alarm : 1 bit.Built-in power supply.Dedicated I/O interface card suitable for IBM computer suitable for ISA slot. SOFTWARE SPECIFICATION:This is a GUI based LADDER LOGIC SOFTWAREDRAG AND DROP (D&D) an instruction instead of typing an instruction. This eliminates errors in typing. All the instructions are displayed ON-SCREEN during Design time. Each and every element is directly addressed with their NAMES not by numbers or codes, which are very difficult to remember. Ex: At design time, you call a SWITCH#0 in your Ladder program by D&D the component called SWITCH#0, and that’s it, not by typing a few digits numbers or codes.Appropriate LIST boxes (input, output) open as you D&D an instruction in LADDER WORKSPACE.Ladder workspace is 24X100 instruction CELLs are available for your use.TOOL TIP features are available at the end of each instruction prompting you “what to do next”Very user friendly.Extensive ON-LINE HELP menu available.GUI based STATUS of the entire PLC is displayed during RUN TIME.Programs are saved, retrieved, edited by simply clicking on Menu list box.Extensive EDIT features are available. 55 Power Electronics Development TrainerSize of Breadboard : 172.5 mm × 128.5mmDC Power Supply :+5 V, -5 V 500 mA,+12V, -12 V 500 mA+15 V, 250 mA+35V, -35V, 250 mAAC Power Supply :18V-0V-18V ,0V-15VOn board Firing CircuitsFrequency range : 30Hz to 900Hz variableAmplitude : 12VPWM control of G1, G2, G3 and G4Duty cycle control of “Gate”Signal is 0 to 100%SCR Assembly : 4 SCRs 2P4M, 400V/2APower Devices : IGBT-G4BC20S, MOSFETIRFZ44N,UJT-2N2646, DIACDB3,TRIAC-BT136, PUT-2N6027Circuit Components on board : Electrolytic Capacitor 10µF, 63V,Electrolytic Capacitor 1µF, 63V ,Met. Capacitor 0.33µF, 63V ,Diode 1N4007, Inductor 220uH, 4.7µH, 10mH.Pulse transformer on board :2 nos. PT4502 1:1 and one is PT4503 1:1:1Load selector : 6 load resistances- 47E/7W,1K/1W, 1K/10W, 10K/10W,120E/5W, 2K2/2W.Test points : 10 nos (Gold plated)Power Supply (Mains) : 220V/110V, 50Hz/60HzIncluded Accessories :Bread boards : 2 nos.Connecting wires : 20 nos.2mm to 1mm Patch cords : 15 nos.2mm Patch cords (Red) 16” : 4 nos.2mm Patch cords (Black)16’’ : 4 nos.2mm Patch cords (Blue) 16’’ : 12 nos.Mains cord : 1 no.with i) Power Semiconductor Application Experiment Panel ii)CON / INV Panel iii)Triggering circuit / dv/dt Protection panel 56 ELECTRICAL & ELECTRONICS MEASUREMENT LAB (6TH SEM) 57 Digital LCR meterVariable measured- L,C,R and loss angle (D factor ) Measured frequencies: 1 KHz, 100KHzDisplay: 3⅟₂ digit , Resistance: 0 to 20 MΩ, 0.1 Ω , Capacitance: 0 to 20000μF, 0.1 pF Inductance: 0 to 20000 H, 0.1μH ,D factor: 0.01 to 8.0 with 1% error 58 Distortion Factor MeterFrequency : 20 Hz to 200KHz Distortion:0.1% to 100% f.s.d. in steps ,Input sensitivity: 100mV (r.m.s.), Input impedance: 1MΩ/160pF, Voltmeter range: 300μv to 300v f.s.d. in 13 range 59 To measure L & Q by Maxwell methodFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 60 To measure the unknown capacitance by Schering bridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 61 To measure the unknown frequency by Wein BridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER WITH FREQ. COUNTER & CRO SIG. O/P INBUILT& CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., BACKLIGHT LED & WOODEN HARD BOX 62 MICROCONTROLLER AND EMBEDDED LAB (5TH SEM) 63 Microcontroller Trainer Kit 1.Write a Simple Assembly Programs fora. Addition b. Subtraction b. Multiplication d. Division2. Write a Programs for (any two of the following)i. 4 x 4 Matrix Keypad Interfaceii. character based LCD Interfaceiii. Analog to Digital Conversion (On chip ADC)iv. Serial EEPROMv. Seven Segment LED Display Interfacevi. Interfacing With Temperature Sensorvii. Stepper Motor Interface8 BIT EMBEDDED MICROCONTROLLER TRAINERFEATURES•Single board design with various resources•Excellent training platform for embedded applications•Software development tools include assembler and ‘C’ compiler•Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS•Experimental board for 40 pin MCS51 and AVR family of microcontrollers•In-system programming (ISP) facility for many microcontrollers•Double RESET signal with manual key•Crystal frequency: 11.0592MHz•On-board RS232 compatible serial interface terminated in a 9 Pin D female connector•4×4 matrix keyboard•16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment•Four 7-segment LED displays•I2C EEPROM (24Cxx)•Real time clock (DS1307) with lithium battery and SRAM•8-high current output port (500mA) for driving external loads•Two 12V sugar cube relays•Continuous tone piezo buzzer•Temperature sensor socket with thermostat functions•Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591•All port-pins available on 10-pin box header•8 LEDs for easy logic state monitoring•8 input trigger switches using 8 push buttons•ISP programming with Flash ISP for AT89S51/52/8252/AVR•Infrared remote control receiver module IC supported•P89V51RD2BN•AT89S52 Installable software on CD•Programmers notepad : Free, open source, text editor•Flash ISP programmer software for 89SXX•Bascom basic compiler (demo version)•MIDE-51: An IDE for MCS-51 microcontroller•WinAVR : open source C compiler for AVR•Sample programs for peripherals DC 12V/500mA output power supplyEXPERIMENTS• Study of LED blink• Study of dancing light• Study of LCD display• Study of LCD-keyboard display• Study of 7 –segment display• Study of RC5 remote control test program• Study of analog to digital converter• Study of real time clock (RTC) 64 ADVANCE COMMUNICATION ENGINEERING LAB 65 To be familiar with the following network components:THIS WILL BE A FULL PACKAGE OF THE FOLLOWINGS:-** RJ5/CAT5CABLES 100 METERSRJ 45CONNECTORS 100 PCSCUTTER & CRIMPING TOOLS FOR RJ45/CAT-5CABLESCABLE TESTER/TRACKER…….. 4 PCSHUBS WITH ACCESSORIES & TOOL KIT NETWORK INTERFACE DIFFERENT CARD 66 COMPUTER NETWORK LAB 67 Network ComponentsCAT 5/5E/6 cable :100mtrs (Rs 2000/-), RJ 45 Connectors: 200pcs (Rs. 500/- )RJ 45 Crimping Tools: 05(Rs. 800/- each)LAN Cable Tester (RJ 45): 05 (Rs 1000/- each) 68 24 Port managed switchNo. of Ports: 10/100 Mbps 24 Ethernet ports, Switch Fabric: 32 Gbps, Form Factor: Rack Mountable,OS: LAN base Image, Console port: Availavble for configuration, Mac Address table: 4000 or higher, VLAN: Supported, MTU: 9100 with support for jumbo frames, Warranty: 3 years onsite comprehensive warranty including parts and labor plus onsite technical support with 24x7 69 24 Port Unmanaged switch24-port 10/100/1000Mbps Ethernet switch Wifi Router: 300 Mbps wireless router with 4 LAN ports and 1 WAN port 70 8 port HubExternal Power Supply, 8 Nos RJ-45 connectors for 10BASE-T/100BASE-TX,Ethernet Ports 8-Port, Capacity 1.6 Gbps, Wireless Speed 10 / 100 Mbps 71 Access points54 Mbps Access point for wifi network: No.of Channel: Dual channel for support upto 108 Mbps ( 2x54Mbps), Backbone connectivity: connect over Fast Ethernet through backbone switches, Security: Security enabled Wifi connectivity with option for Broadcast of SSID,Network:802.11 a/b/g/n network support, PoE: PoE enabled, Form factor: Wall or ceilling mountable with physical lock suppor. Warranty and support: 3 years on site comprehensive warranty including parts and labour plus on site technical support with 24 X 7 72 LAN TrainerEthernet (IEEE 802.3 wireless LAN (802.11),Token bus ( 802.4) Token ring ( 802.5), Data rate : 10/100 Mbps for ethernet, 1, 2, 5.5, 11 Mbps for wirless & LAN as per IEEE 802.11b, connectivity through RJ 45 connector. 73 Installation & commissioning of network(i) Laying ofOFC & CAT 6 Cable (ii) splicing (iii) Installation & network testing 74 INSTRUMENTATION AND CONTROL LAB (6th sem) 75 To measure displacement with LVDT ACTUAL LVDT WITHINSTRUMENTATION AMPLIFIERDC O/P WITH DIGITAL METER, 3and 1/2 digit LED display with polarity indicator, sensitivity of 10mV/mm in the range of 10mm. 76 To measure temperature with thermocoupleTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 77 To measure temperature with thermistorTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 78 To measure pressure with strain gauge STRAIN GAUGE SENSOR WITH WAIGHT LOADING SYSYTEM SAMPLE WEIGHTS.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR 79 To plot the Characteristics of RTD (PT-100)RTD 3 WAIR SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 80 Temperature controller with on-off controller, Temperature controller with PI controller, Temperature controller with PID controllerTemperature controller with facilities for P, I, D and relay control blocks, Operating temperature: Ambient to 90°C, Separate controls for P, I, D channel gains,Two settings for relay hysteresis, Fast 25W oven fitted with IC temperature sensor, Forced cooling option to ready oven for next experiment, Digital display of set and measured temperature on a 3½ digit built-in DVM, 0-9999 sec, timer on panel for a convenient temperature response experiment, Buffered output for recorder 81 CIRCUIT THEORY LAB 82 Determine the permeability of magnetic material by plotting its B-H curveHysteresis Loop Tracer/ BH Curve apparatus220volt AC, 50Hz supply 83 Series parallel resonance of R-L-C cktKit for Series parallel resonance of R-L-C ckt: The Set-up consist of Power supply (with variable frequency), audio oscillator with digital readout, digital RMS meters and different number of inductors (smoothly variable), capacitors, Rheostat, patch cord & manual. 84 SWITCH GEAR LAB 85 Speed control of Induction motor 1ph by using SCR3Φ, 400V ac, 50HZ.,1HP, 1440 rpm. Speed control using ac back to back configuration of SCRs and to note Speed vs. Load Characteristics at open loop condition. This unit should consist of AC 3Φ Induction Motor (1HP) coupled with a (i) DC Shunt Generator (1HP) for loading and (ii) a DC Tachogenerator to be used for speed feedback control. A DC meter must be provided for displaying the speed of the motor from the Tachogenerator with suitable AC Ammeter and Voltmeter for the measurement (AE Make Panel Type or digital) Sheet Metal enclosure with powder coating paint must be provided. (with foundation & Experiment Table) 86 C.T. & P.T. testing trainer kit C.T. & P.T.testing trainer kit - Variable AC voltage source (0-220V)& variable AC current source (0-25A), CT for 25/5A, PT for 220/110V, Autotransformer for voltage & current adjustment, MCB protection, To determine Ratio error, Phase angle error of CT & PT, with Burden box. , polarity check indicator , range selector switch. 87 Induction type electromagnetic relay* Over Current (IDMTL Electro- Mechanical Type , Model CDG-11 or equivalent) Relay,*PSM, TSM setting* Auxiliary Relay,* Counter /Timer,* D.W. Transformer, * Variac,* Knife Switch,* DC power supply for DC auxiliary relay and the relay,* Portable Ammeter.Necessary panel for the complete set up with wooden (teak wood) table (4x3x2.5) 88 Air Circuit BreakerCut section model 89 Transmission line protection simulation KitOver Current, Earth Fault, Over Voltage, Under Voltage, Directional, Differential, Distance protection 90 POWER PLANT LAB 91 Diesel generator power plantmodel of small diesel generator power plant 92 Hydro power plantmodel of micro Hydro power plant 93 Horizontal axis small wind turbinemodel 94 CSP plantmodel 95 MEASUREMENT LAB 96 Kelvin double bridgeCompletely self contained, stand alone unit with built in power supply, required meters, Standard Resistance, wooden bench, high sensitivity spot light type galvanometer, connecting patch chords and operating manuals. 97 RENEWABLE ENERGY LAB 98 Renewable Energy Labsolar PV plant- Model 99 Renewable Energy Labvertical axis small wind turbine- Model 100 ELECTRIC MACHINE LAB 101 VoltmeterVoltmeter (M.I type) 0-150V/300V/500V 102 VoltmeterVoltmeter (M.I type) 0-20V/50V 103 AmmeterAmmeter (M.I type) 0-5A/10A/20A 104 AmmeterAmmeter (M.I type) 0-1A/2A/5A 105 MultimeterAnalog Multi-meter of ISI marked: DC : 0-200 mV/ 1000 V & 0- 2mA – 10 A,AC : 0 – 200mV/1000V &0-2 mA – 20 A, Resistance : 0 – 200 Megaohm, with shock proof protection & other facilities and operatingmanuals. 106 MultimeterDigital Multi-meter of ISI marked: DC : 0-200 mV – 1000 V & 0-2mA – 10 A,AC : 0 – 1000 V & 0- 2mA– 20 A, Resistance : 0 – 200 Megaohm, with diodetesting, data hold, shock proof protection , auto power off etcfacilities and operating manuals. 107 WattmeterDynamometer Wattmeterof ISI marked : Low Power Factor ( 0.2 ) : Current Rating : 5/10 A , Voltage Rating : 150/300 / 600 V , with anti-parallax mirror , 120 mm scale length , knife edge pointer, mouldedBakelite body, portable. 108 VoltmeterVoltmeter (PMMC type) 0-150V/300V 109 AmmeterAmmeter (PMMC type) 0-2A/5A 110 StarterDC 3-point Starter : 220 V DC , 15 A 111 StarterDC 4-point Starter : 220 V DC , 15 A 112 DC Power SupplyDC Power Supply : Input : 415V, #-Phase AC, 50 Hz;Output : 220V DC , 5 KW of a standard make . 113 RheostatRheostat with sliding Jockey : 100 Ohm , 5 A 114 RheostatRheostat with sliding Jockey : 500 Ohm , 5 A 115 Digital Energy MeterDigital Energy Meter of ISI marked: Three Phase AC , 440 V , Maximum 30 A, 50 Hz with operatingmanual. 116 Digital MeggerDigital Megger for measuring insulation resistance of ISI marked: 250 / 500 V, Maximum 200 Mega ohmwith operating manual 117 VariacSingle Phase Variac of ISI marked : Input:– 230 V AC, Output : 0 – 270 V AC , 1 KVA, 50 Hzof a standard make 118 VariacThree Phase Variac of ISI marked : Input:– 415 V AC, Output : 0 – 500 V AC , 3 KVA, 50 Hzof a standard make 119 Clamp on MeterClamp on Meter of ISI marked : Digital type : For measuring Voltage ( AC/DC ), Current ( AC/DC ) , resistance, Power & Power Factor with operating manuals 120 Phase Sequence IndicatorPhase Sequence Indicator of ISI marked : 50 – 500 V AC, 25 – 60 Hz 121 Frequency MeterFrequency Meter of ISI marked: Digital Type : 240 V, 47 – 99 Hz 122 TransformerSingle-Phase Transformer : 1 KVA , 230 V/115V , 50 Hz( Air Cooled) 123 TransformerThree-Phase Transformer : 3 KVA , 415/230 V , 50 Hz 124 3-Ph Resistive LoadThree phase resistive load : 400 V , 6 KW 125 3-Ph Inductive LoadThree phase inductive load : 400 V , 3 KW 126 3-Ph Capacitive LoadThree phase capacitive load : 400 V , 3 KW 127 3-Ph StarterStar Delta automatic starter for 3 Phase,400 V, 5 Hpmotor 128 3-Ph DOL StarterDOL & Auto -Transformer Starter : 3-phase AC , 400V, 10A, 50 Hz 129 StroboscopeDigital Stroboscope - 10,000 rpm 130 DCGenerator Voltage build UPSupply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Building up Voltage in DC Generator ( Open Circuit / Saturation Characteristics: DC Shunt Motor of ISI marked : 2HP or 5HP, 220 V. Machines will have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and operating manual isalso must.(with foundation & Experiment Table) 131 Brake test in DC Series Motor Supply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , Spring balance & loadings, protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Brake test in DC Series Motor& load Characteristics: DC Series Motor of ISI marked : 2HP, 220 V.Machineswill have to be set on M.S.Channel base with suitable footing/ fixtures and screws etc. and operatingmanual is also must.(with foundation & Experiment Table) 132 Speed Controlof 3-Phase Squirrel cage Induction motorSupply, Installation , Commissioning & Testing with necessary & suitable ISI marked meters such as ammeter, voltmeter, frequency meter , starter, protective devices and all other accessories mounted on a standing panel board as per following specification :For Speed Controlof 3-Phase Squirrel cage Induction motorby – (i) volt /freq control method : Three phase Squirrel cage induction motor : 2HP, 400V with v/f controller.Machineswill have to be set on M.S.Channel base with suitablefooting/fixturesandscrewsetc.includingtheoperating manual.(with foundation & Experiment Table) 133 Load Test of an Alternator & % regulation at various loads with Unity Power factorSupply, Installation , Commissioning & Testing with suitable ISI marked ammeter, voltmeter, starter, star connected load , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Load Test of an Alternator and Determination of%-age regulation at various loads with unity power factor : DC Shunt Motor of ISI marked : 3HP, 220 V , AlternatorISI marked: 2 KVA, 415 V , 50 Hz.Machineswill have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and andoperating manual is also must.(with foundation & Experiment Table) 134 Measurement of Slip of 3-Phase induction motorSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter, stroboscope etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :Measurement of Slip of 3-Phase induction motor by –(i) Stroboscopic& (ii ) Tachometer methods and reversing the direction of rotation of the motor : Three phase squirrel cage induction motor of ISI marked: 2 HP , 415 V , 50 Hz .Machineswill have to be set on M.S.Channel base withsuitable footing/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 135 Synchronization of two 3-Phase alternatorsSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification : Synchronization of 3-Phase alternator ( 2 SETS ) by– (a) Three Lamp & (b) Synchroscope Methods : DC Shunt Motors of ISI marked : 5HP, 220 V ,Alternators of ISI marked: 3 KVA, 400 V, 50 Hz.Machineswill have to be set on M.S.Channel base withsuitable footings/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 136 POWER SYSTEM LAB 137 KIT FOR STUDY OF ACTIVE & REACTIVE POWERWITH SIMULATIOL KIT & LAPTOPStudy of Active & Reactive power with simulator Kit and Laptop with appropriate software, The kit should consist of variable Inductive & Capacitive load to observe change in active & Reactive power 138 MODEL OF VARIOUS TYPES OF TURBINES USED IN POWER GENERATING STATIONSModel Piece of each type of Turbine 139 PYRANOMETERMEASUREMENT OF SOLAR RADIATION BY PYRANOMETER 140 PHOTO VOLATIC SYSTEM USED IN STREET LIGHTWITH SOLAR PLATE,PV CELL,BATTERY,CHARGER 141 STUDY OF POWER SYSTEM OF 6.6 KV/400 V SUBSTATION USED FOR A HOUSING CONPLEXMODEL 142 D.C NETWORK ANALYSERD.C NETWORK ANALYSER FOR STUDY OF DIFFERENT TYPES OF FAULTS 143 DIFFERENT TYPE OF EXCITATIONS SYSTEM USED IN ALTERNATORSTATIC EXCITER,SHAFT MOUNTED,ROTATNG TYPE EXCITER & Brushless exciter ( Model only) 144 MISCELLANEOUS 145 MOTOR-ALTERNATOR SET FOR SYNCHRONISATION OF TWO ALTERNATOR WITH SYCHRONISING PANEL INCLUDING CHECK SYNCHROSCOPE & BULB ARRANGEMENT TO PERFORM TWO BRIGHT ONE DARK LAMP METHOD1.TWO SET OF D.C MOTOR 2.5 KW,230 VOLT,3000 R.P.M WITH SPEED CONTROL ARRANGEMENT 2. TWO SET OF 1 KVA,3 PHASE,440 VOLT,3000 R.P.M ALTERNATOR WITH BASE MOUNTING & EXCITATION SYSTEM. 146 PlierPlier of good quality 147 TesterTester Screwdriver of reputed brand 148 Screwdriver setScrewdriver set of reputed brand
Contract Date: Mar 12, 2026 Contract Value : ₹ 33.87 Lakh
Government Departments No of Bidders 9
West Bengal View Result →
20.
Environment and Forests #9797724 AOC
Bids Are invited for Passive Loud Speaker - 12 Inch Passive Loudspeaker With Woodern Enclosure 1400 W Peak, 131 Db Peak Spl Utilizing High-Sensitivity Transducers Designed And Engineered By Ev. 90 Degree X 60 Degree Pattern For Best Coverage On Mid Size Stahes. 40 Degree Monitor Angle Wih Rubberfeet, Frequency Range -10Db, 55 Hz To 20 K, Frequency Response -3 Db 82 Hz To 18 K, Power Rating 1400, Power Handling Continuous / Peak 350 W/1400 , Power Dsp Amplifier - Power Amplifier With Dsp 2X 950 W Power Amplifier For Live Performance Applications, Maximum Output Power, Single Channel 2 Ohm Per 1600W,2.6 Ohm Per 1300W, 4 Ohm Per 950 W, 8 Ohm Per 480W, Maximum Output Power. , Audio Digital Signal Processor - Audio Digital Signal Processer With Conferencing Sound Processor Channel Separation Crosstalk Less Than -105 Db At +4 Dbu, 1 Khz Input Signal, Dynamic Range Greater Than 115 Db, A-Weighted, 20 Hz To 20 Khz, Analog Input To Analog Output , Audio Mixer Console - 10-Channel Mixing Console, +48V Phantom Power, Xlr Balanced Outputs, Metal Chassis Max. 4 Mic Per 10 Line Inputs 4 Mono + 3 Stereo 1 Stereo Bus 1, Aux Incl. Fx D-Pre Mic Preamps With Aninverted Darlington Circuit , Handheld Dynamic Microphone - Handheld System With Dynamic Microphone, Synthesized Pll Receiver Type, Frequency Range Rf 1. Band 618 - 634 Mhz, 2. Band 678 - 694 Mhz 3. Band 516 - 532 Mhz 4. Band 850 - 865 Mhz, Number Of Channels 32, Modulation + Or - 40 Khz. , Lapel System - Lapel System With Ulm18 Directional Microphone, Connector Type Quater Inch Unbalanced, 3-Pin Xlr Balanced, Family R300, Dynamic Range Greater Than 95 Dbdb Power Supply 12 Vdc, 500 Ma Max. , Podium Microphone - Podium Microphone With Multipattern Desktop Microphone, Frequency Response -3 Db, 50 - 20,000 Hz, Polar Pattern Omni, Cardioid, S-Cardioid And H-Cardioid, Connector Type 3-Pin Xlr Element Dual Condenser Back-Electret Impedance, Low-Z Balanced 200 Polar Pattern Omni, Cardioid, S-Cardioid And H-Cardioid Frequency Response -
Contract Date: Ref. Documents Contract Value : ₹ 11.66 Lakh
Government Departments No of Bidders 3
Karnataka View Result →
21.
Public Administrative Department #9689676 AOC
Tender For Supply Of Office Equipments Etc. In Various Offices Under Women & Child Development Deptt., Btc Under Sopd-G Fund, Fy 2025-26. , Xerox Machine With Stabilizer Specification Standard Functions Digital Copier / Printer / Scanner ( Network & Wifi ) Type Desktop Memory 1024Mb Gradiation 256 Type Of Originals Sheets, Books Max Original Size A3 (11X17) Output Size A3 To A5 (11X17 To 5-1 / 2 X 8-1/2) Image Loss Complied Paper Capacity Standard 250 Sheets + 100 Sheets (Bypass Tray ) Paper Weight 54 To 157 G/M2 Warm-Up Time Less Than 30 Sec Resolution 601 Dpi X 600 Dpi Multiple Copy 1 To 999 Sheets Magnification 25 To 400% Exposure Modes Text Mode / Photo Mode / Auto Power Mode Requirement Ac 220 To 240 V 3.5 A (50/60Hz) Accessories Stabilizer Apparent Power 2Kva , Computer Set (Desktop) With Monitor, Accessories Etc. Rom 512 Gb Ssd Core I5 Processor (Latest Gen), Mother Board - Msi Z 8 Gb Ram Ddr5 Accessories Ups 725 W Led 19 Monitor (B.Q.) Keyboard (B.Q.) Mouse (B.Q.) , Projector With Screen & Accessories. Display Projection System Dlp Single 0.65 Wxga Dmd Type 0.65 Wxga Native Resolution 1280 X 800 Pixels Brightness 4500 Ansi Lumens Contrast Ratio* 25000:1 Display Color 30 Bits (1.07 Billion Colors) Aspect Ratio Native 16:09 (5 Aspect Ratio Selectable) Light Source Lamp Light Source Life* Normal 6000 Hrs, B. Eco 10000 Hrs, C. Smarteco 10000 Hrs, D. Lampsave 15000 Hrs Optical Throw Ratio 1.55~1.7 Zoom Ratio 1.1X Keystone Correction Auto Id, Vertical +/- 40 Degrees Projection Offset 100% Projection Size 60~150 Audio Speaker - 10W X1 Compatibility Resolution Support Vga(640 X 480) To Wuxga_Rb(1920 X 1200) Horizontal Frequency 15K~102Khz Vertical Scan Rate 23~120Hz Hdtv Compatibility 480I, 480P, 576I, 576P, 720P, 1080I, 1080P Video Compatibility Ntsc, Pal, Secam, Sdtv (480I/576I), Edtv (480P/576P, Hdtv (720P, 1080I/P 60Hz) Best Quality Accessories Projector Tripod Stand Height Up To (4 Feet ) Adjustable Projector Screen With Stand (B.Q.) Folded 188.5X14x8 Cm (Wxdxh), Unfolded 188.5X14x246.5 Cm (Wxdxh) , Sound Box With Microphone Power Input: 100 - 240 V ~ 50 / 60 Hz Output Power: 400 W Rms (Iec60268) Audio Transducer: 2 X 7.5 Inch (208 Mm) Woofers, 2 X 1 Inch (25 Mm) Dome Tweeters Frequency Response: 40 Hz - 20 Khz Signal-To-Noise Ratio: 80Db Control And Connection Input Sensitivity: • Aux-In: 250 Mv Rms (3.5 Mm Connector) • Mic-In: 20 Mv Rms • In / Line-In: 100 Mv Rms • Bluetooth/Usb Input: -12 Dbfs Bluetooth® Version: 5.4 Bluetooth® Profile: A2dp V1.4, Avrcp V1.6 Bluetooth® Transmitter Frequency Range: 2.4 Ghz - 2.4835 Ghz Bluetooth® Transmitter Power: = 18 Dbm (Eirp) Bluetooth® Transmitter Modulation: Gfsk, ?/4 Dqpsk, 8Dpsk Usb Format: Fat16, Fat32 Supported Formats: .Mp3, .Wav, .Wma Usb-C Charge Out: Pdo (5 V / 3 A, 9 V / 3 A, 15 V / 2 A, 20 V / 1.5 A), Pps (5 - 11 V / 2.7 A, 5 - 16 V / 1.85 A) Cable Type: Ac Power Cable Cable Length: 2.0M/6.6Ft Battery Type: Li-Ion 99.02 Wh (Equivalent To 21.6 V / 4584 Mah), Battery Charge Time: 3 Hours, Play Time: Up To 15 Hours , Laser Printer 1 Imaging Drum (Black) Print Speed Black (Iso, A4) Normal: Up To 30 Ppm [5] [5] Print Speed Color (Iso, A4) Print Quality Black (Best) Black: Up To 1,200 X 1,200 Dpi Color: Print Resolution Technologies Standard (600 X 600 Dpi); High Resolution (1,200 X 1,200 Dpi) Duty Cycle (Monthly, A4) Up To 30,000 Pages Recommended Monthly Page Volume Up To 300 To 2,300 Pages Processor Speed 600 Mhz , Laptop Rom 512 Gb Ssd Core I5 Processor (Latest Gen) 8 Gb Ram Ddr5 Screen Size -15.6, Uhd 4K Operating System - Windows 11 Best Quality , Armed Chair Plastic (B.Q.) Pattern - Glossy Design Stye - Contemporary , Steel Almirah Size - Lxwxb (78X36x18) Gauge - 22/24 Sheet (B.Q.)
Contract Date: Mar 23, 2026 Contract Value : ₹ 1.99 Crore
Government Departments No of Bidders 3
Assam View Result →
22.
Educational and Research Institute #9426408 Technical Bid
Rate Contract For The Procurement Of Consumables/Non-Consumables For The Department Of Transfusion Medicine , Note:1.*Samples For Kits, Reagents And Consumables Marked With Star (*)/Brochure Listing Product Details/Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender. 2. #Samples For Kits, Reagents And Consumables Marked With Star (#), Distributor Authorization Letter From The Manufacturer Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender.3. In Case Of Non-Receipt Of Samplesas Specifed For Above Within One Week After Display Of E-Tender, An E-Mail Remainder (Mentioned In Tender Form) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled. Only Bidders Who Have Provides Samples Will Be Taken For Final Evaluation 4. Selection Will Be Made Only After Evaluation Of Samples/Brochure, Certificate/ Demonstration Etc.Consumables , Anti-A Grouping Sera Igm (Monoclonal)* (10 Ml Vials)Specifications For All Above Antiseras And Bovine Albumin (Item No: 1 To 13) 1. All Antiseras Should Meet Minimum Quality Control Specifications As Per Transfusion Medicine Technical Manual, 2Nd Edition, Pg.No: 346-351; Director General Health Services, Ministry Of Health And Family Welfare, Govt. Of India Publication2. The Manufacturers Should Have Supplied All Above Mentioned Antiseras And Bovine Albumin Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years.3. The Quantity Quoted May Be Increased Or Decreased Without Assigning Any Reasons. , Anti-B Grouping Sera Igm (Monoclonal)* (10 Ml Vials) , Anti-Ab Grouping Sera Igm (Monoclonal)* (10 Ml Vials) , Anti-D Grouping Sera Igm (Monoclonal)* (10 Ml Vials) , Anti-A1 (Lectin)* (5 Ml Vials) , Anti-D Igm + Igg Grouping Sera (Monoclonal)* (10 Ml Vials) , Anti-D Igg Grouping Sera (Monoclonal)* (10 Ml Vials) , Anti -D Igg Grouping Sera (Polyclonal)* (5 Ml Vials) , Anti -H (Lectin)* (5 Ml Vials) , Bovine Albumin 22%* (5 Ml Vials) , Anti Human Globulin Sera Igg+C3d (Polyspecifc)* (5 Ml Vials) , Anti Human Globulin Sera Igg (Monospecific)* (10 Ml Vials) , Anti Human Globulin Sera C3d (Monospecific)* (10 Ml Vials) , Instant Abd Blood Grouping Pad/Cards/Strips For Voluntary Blood Donation Camps. (Ready To Use For Blood Grouping Anti-A, Anti-B And Anti-D Igm)* Specifications:1. The Above Pad/Cards/Strips Should Be Approved By Statutory Authority Like Drug Control General Of India/National Inst. Of Biologicals. 2. The Pad/Cards/Stripes Should Contain Wells With Precoated Monoclonal Antisera With Color Coading And Suitable Medium/Matrix To Immobilize Agglutinated Red Cells So As Results Are Read Witin 30-45 Seconds3. The Pad/Cards/Strips Can Be Used At An Ambient Temperature Of 20-40Deg C. 4. It Should Compatible With All Types Of Blood Samples, Namely Whole Blood, Heparin, Finger Prick, Blood Bag Segments Etc.,5. It Should Easily Readable For 24 Hours After Testing,Fully Traceable By Photography/Other Media. 6. Should Be Able To Detect Weak Abd Antigens7. Necessary Dispensing Micro Pipettes/Pasteur Pipettes And Tips Should Be Provided Along With The Kits. 8. Necessary Buffers And Other Consumables Should Be Provided In Enough Quantity Including Wastage If Any For Complete Usage Of All Cards/Pads/Stripes Along With The Kits. 9. The Bidder/Supplier Should Provide Satisfactory Certificates From 3 Blood Banks Which Are Already Using Such Pads/Stripes/Cards.10. Product Should Be Ce Marked11. Expiry After Opening Minimum 14 Days , Copper Sulphate Cuso 4.5H2o - Ar Grade* (500 Gms) , Polygrid Test Tube Stand (For 12 X 100Mm) - 48 Tubes , Stands For Blood Grouping Antisera , Round Adhesive Wound Plaster - Disposable* (100 Nos) , Round Blood Lancets - Disposable And Sterile* (100 Nos) , Disposable Pasteur Pipettes 1 Ml.(500 Nos) , Disposable Pasteur Pipettes 3 Ml.(500 Nos) , Disposable Pasteur Pipettes 10 Ml.(500 Nos) , Blotting Paper (White Ordinary) 60 X 60 Cm* (500 Nos) , Cryo Gloves - Water Proof, Mid Arm, Size-Medium , Tissue Roll* , K3 Edta- Non-Vacuum Tubes 2 Ml* (100 Nos) , K3 Edta- Vacutainer 2 Ml* (100 Nos) , Vacutainer Needle With Holder And With Needle Protector (100 Nos) , Microtip Boxes 2-20 ?L -Autoclavable , Microtip Boxes 2-200 ?L -Autoclavable , Microtip Boxes 200-1000 ?L -Autoclavable , Acrylic Beakers - 50 Ml , Acrylic Beakers - 100 Ml , Acrylic Beakers - 250 Ml , Acrylic Beakers - 500 Ml , Conical Flask - 50 Ml , Conical Flask - 100 Ml , Conical Flask - 250 Ml , Conical Flask - 500 Ml , Conical Flask - 1000 Ml , Thermal Paper For Elisa Reader 110 X 20 (11 Cms Width)* , Pipette Stand (For 6 Pipettes) , Reagent Bottle Stand , Blood Bag/Ffp Storage Racks , Teepol Liquid Cleaner* (10 Litres) , Sodium Hypochlorite Solution 4%* (5 Litres) , Isopropyl Alcohol (500 Ml) , Electronic Thermometer (Wettable)-Range Upto Minus 80 , Surface Temperature Measuring Thermometer , Magnetic Stirrer Bar , Specific Gravity Meter-With Range 1.000 To 1.100 , Nageottes Chamber , Volumetric Flask -500 Ml , Mortar & Pestle , Capillary Tubes (100 Nos) , Ulex Europeus For Lectin Preparation-1Mg , Dolichos Biflorus For Lectin Preparation (1 Mg) , Arachis Hypogea For Lectin Preparation (1 Mg) , Thrombin From Bovine Plasma - Lyophilized Powder (1 Ku) , Protamine Sulfate Reagent (5 Gms.) , Epsilon Amino Caproic Acid-Reagent Grade (1 Gm) , Sodium Dihydrogen Phosphate-Reagent Grade (500 Gms.) , Disodium Hydrogen Phosphate -Reagent Grade (500 Gms.) , Bovine Albumin 6%-Reagent Grade (100 Ml) , Papain Powder-Reagent Grade (100 Gms.) , Ficin Powder-Reagent Grade (100 Gms.) , Phosphate Buffer Saline - Ph 7.4 (100 Ml) , Dithiothreitol (Dtt) (5 Gms.) , Glycine-Reagent Grade -500G , Glycine-Reagent Grade -0.1M , 2- Mercaptoethanol-Reagent Grade (100 Ml) , Chloroquine-Disphosphate-Reagent Grade (25 Gms.) , Wax Sealant (500 Gms.) , 3350 Mw Polythelene Glycol (500 Gms.) , L-Cysteine Hydrocholride Reagent Grade (25 Gms.) , Nacl (Lr) (500 Gms.) , Disodium Edta (500 Gms.) , Tris (Tris Hydroxymethyl) Aminomethane (25 Gms.) , Sodium Barbital-Reagent Grade (25 Gms.) , Ethyl Alcohol-Reagent Grade (500 Ml) , Erythrosin-Reagent Grade (25 Gms.) , Harris Haematoxylin Solution (500 Ml) , Glycerol Lactate (500 Ml) , Turks Solution (250 Ml) , Ph Strips 0.0-6.0 Ph, Resolution: 0.5 Ph Unit (50 Strips) , Ph Strips 6.0-7.7 Ph, Resolution: 0.3-0.4 Ph Unit (50 Strips) , Ph Strips 7.0-14.0 Ph, Resolution: 0.5 Ph Unit (50 Strips) , Ph Buffer Capsules (3 Standard Buffers- Ph 4, Ph 7 & Ph 10)-2 Each , Microtitre Plate U Bottom - 96 Wells (50 Plates) , Test Tubes With Rim (12X100 Mm) (100 Nos) , Test Tubes With Rim (12X75 Mm) (100 Nos) , Capillary Microhematocrit Tubes (2.9) (200 Nos) Specification:1. Size: Length: 75 Mm, Innder Diameter: 1.2 Mm, Wall: 0.2 Mm 2. Capacity: 70 Ul3. Ends Can Be Sealed With Sealing Clay 4. Interior Surface Of Heparinized Tubes Is Evenly Coated With Ammonium Heparin Which Will Not Interfere With Sodium Determination , Sterile Conical Tubes (100 Nos)Specification:1. Capacity: 15 Ml2. Length: 120 Mm 3. Width: 17 Mm 4. Material: Polypropelene5. Dome Top 6. Rcf: 12000 Rpm 7. Storage: -80°C , Sterile Conical Tubes (100 Nos)-50Ml , Sodium Hydroxide Powder (80-100 Mesh) Extrapure (500 Gms.) , Hydro Chloric Acid (500 Ml) , Citric Acid (> 99.5%) (500 Gms) , Potasium Citrate (500 Gms) , Tri-Sodium Citrate Dihydrate (500 Gms) , Sodium Azide (100 Gms) , Bromylin Crude Powder (100 Gms) , Chloroform (500 Ml) , Neutralizing Solution (24 Ml) , Digitonin (1 Gm) , Di-Ethyl Ether (500 Ml) , Ethanol 50%(500 Ml) , Methylene Chloride(500 Ml) , Xylene (500 Ml) , Chymotrypsin(1 Gm) , Vicia Graminea Lectin (Anti-N Lectin)(5 Ml) , Polybrene (5 Gms.) , Pronase (5 Gms.) , Trypsin (100 Gms.) , Di-Butyl Phthalate (500 Ml) , Di-Methyl Phthalate (500 G) , Sucrose (500 Gms.) , Di-Potasium Edta (500 Gms.) , Magnesium Chloride (100 Gms.) , Chromic Chloride (500 Gms.) , Chloramphenicol (5 Gms.) , Dextrose (500 Gms.) , Inosine (500 Gms.) , Neomycin Sulphate (5 Gms.) , Calcium Chloride (500 Gms.) , Sodium Bicarbonate (500 Gms.) , Sodium Carbonate (500 Gms.) , P Nitrophenyl Phosphate (25 Gms.) , Whatmans Filter Paper-100Mm (100 Nos) , Ficoll Hypaque (100 Ml) , Single Channel Variable Pipettes 20 -200 ?L* Technical Specifications For Single Channel Variable Pipettes (Item No: 130 To 132) 1.Extremely Light Pipetting Action By Tension Free Spring Mechanism2.Fully Autoclavable(121°C):Uv Resistant Material, 3.Volume Locking System4.Increments At Least 0.1?1 Fine Adjustment For Pipettes Expect For 100-1000 ?I Volume Pipette Where Increments Can Be Read As 0.5 ?I 5.Suitable For All Brands Of Tips.6.Adjustable For Variable Volume; Fixation Of Adjustable Volumes7.Three Defined Stops(Single Button Operation Preferred)A. Take Up From First Stop,B. Dispensing And Blow Out, C. Tip Ejection 8.Slim Pipette Shaft, 9.Cone For Standard Tips, 10. Safe Cone Filter Lock11. Easy And Safe Tip Ejector Mechanism., 12. Made Of Corrosion Proof Material.13. Accuracy <.98.5%, 14. Precision<. 99.4%, 14. 2 Years Warranty15. Returnable Samples Should Be Provided For Evaluation , Single Channel Variable Pipettes 100 -1000 ?L* , Single Channel Variable Pipettes 5-20 ?L* , Multi Channel Variable Pipettes 30 - 300 ?L*- 8 Channel Technical Specifications (Item No: 133 To 136) 1. Iso 8655 Certified Digital Multichannel Pipettes Of Variable Volume Suitable For All Brands Of Tips. 2. Pipetting Modes: Autodispense, Dispense, Pipetting, Pipetting And Mixing, Manual Pipetting, Sequential Pipetting And Dispensingrangeincrementprecisiontype 5 To 50?L 0.5 Ul2.0 To 0.7%8 Channel5 To 50?L 0.5 Ul2.0 To 0.7%12 Channel 30-300 ?L5 Ul1.5 To 0.3%8 Channel30-300 ?L5 Ul1.5 To 0.3%12 Channel 3.Extremely Light Pipetting Action By Tension Free Spring Mechanism 4. Fully Autoclavable(121°C):Uv Resistant Material 5.Volume Locking System6.Adjustable For Variable Volume;Fixation Of Adjustable Volumes7. Desirable: A History Function, Service Interval Warning, Sequential Tip Ejection8. Should Be Duly Ce Certified Or Approved9. 2 Years Warranty 10. Returnable Samples Should Be Provided For Evaluation , Multi Channel Variable Pipettes 30 - 300 ?L*- 12 Channel , Multi Channel Variable Pipettes 5 - 50 ?L*- 8 Channel , Multi Channel Variable Pipettes 5-50 ?L*- 12 Channel , Pipette Tips 2-20 Ul* (1000 Nos)Description: Used For Accurate Measurement Of Small Volume Fluid Dispensing. Useful For Safety Of Laboratory Personnelspecification: (Item No: 137 To 139)1. Compatible With International Standard Pipettes Attachable By Firm Grip 2. Available In Packs Of 1000 Tips3. Non Sticky In Nature4. Smooth Internal Surface 5. Pipette Should Be Clean, With Patent Tips That Are Sharp And Pointed6. Pink And Blue Transparent In Colour7. Should Not Be Made Of Reused Plastic , Pipette Tips 2-200 Ul* (1000 Nos) , Pipette Tips 200-1000 Ul* (1000 Nos) , Hemocue Cuvettes# (200 Nos) Specification:1. Compattible With Hemocue 301 Instrument+C2372. Should Be Able To Measure The Hb Using Blood From Finger Prickbased On Azide Methohemoglobin Method. , Cuvettes For Plasma Hemoglobin Estimation(100 Nos) Specification: 1. Compattible With Hemocueinstrument 2. Modified Azidemethemoglobin Method , Leishmans Stain Powder (100 Gms.) , Grams Stain Solution Kit , Methanol (5 Litres) , Sponge Ball For Blood Donors , Paper Tumbler For Drinking Milk - Donor Refreshment (100 Nos) , Test Tube - 5Ml With Clot Activator (100 Nos)-Non Vaccum , Test Tube - 5Ml With Clot Activator (100 Nos)-Vacutainer , Glass Slides (100 Nos) , Temperature - Sensitive Indicators (2-6°C) For Monitoring Red Cell Blood Bags , Blood Irradiation Indicator Labels , Autoclave Indicators , Oxygen Mask With All Sizes Venturie Adapter , Re-Breathing Bags - All Sizes , Round Bottom Test Tube (Without Rim: 12X75cm) (100 Nos) , Round Bottom Test Tube (Without Rim: 12X100cm) (100 Nos) , Test Tube Rack Stand For 72 Tubes , Test Tube Rack Standfor 18 Tubes , Vacutainer – 10 Ml Tube Sterile With Acda (100 Nos) , Measuring Cylinder - 250 Ml , Measuring Cylinder - 500 Ml , Measuring Cylinder - 1 Litre , Stainless Steal Forceps - 18 Inch , Storage Vial - 1 Ml (1000 Nos) , Storage Vial - 2 Ml (1000 Nos) , Storage Vial - 3 Ml (1000 Nos) , Storage Vial - 5 Ml (1000 Nos) , Storage Vial - 10 Ml (1000 Nos) , Sterile Microcentrifuge Tubes-0.5Ml (1000 Nos) , Sterile Microcentrifuge Tubes-1.5Ml (1000 Nos) , Papain Cystein Activated -1% W/V , Cell Pack For Hematology Analyser -20 L , Stomatolyser -500Ml , Cell Clean , Plasmalyte( For Cryo Preservation) , Acd Solution- 500 Ml , Autoclave Bags , Coagulation Reagents (Should Be Compatible With Meril Semi Automated Coagulometer-Merilyser) Pt Reagent-10 X 2 Ml , Aptt Reagent-10 X 2 Ml , Factor Viii Assay-3Ml , Fibrinogen- 20 Test , Coagulation Cuvettes-1000 , Calcium Chloride-10Ml , Note:* Item Nos From 184 To 203 - To Be Procure Only After Ascertaining Stock On Hand And Requirement At The Time Of Placement Of Supply Order. General Specification: ( Should Meet Technical Specification As Specified In Minutes Of Technical Specification Committee To Review Specifications Of Blood Bags For The Use In Blood Banks Held On 15-02-2017 Under Ministry Of Health Govt Of India New Delhi)1. Flexible Pre-Sterilized, 2. Pyrogen Free, 3. Non-Toxic, Non-Haemolytic, Biocompatible Material4. No Risk Of Contamination And Air Embolism (Closed System) With All Leak Proof Seals (Disposable Bags)5. Slit On The Both Sides Of The Bags Should Be Enough To Accommodate 5 – 10 Ml Volume Test Tubes6. The Capacity Of The Bag Should Be Enough To Prevent Any Ballooning/Rupture Of The Bag From The Seam When It Is Filled Up With The Requisite Volume Of Blood7. Flexible Non-Kinking, 8. Non-Sticking, 9. Transparent, 10. Leak-Proof, 11. The Tubing Should Have Same Id/Segment Number As That On The Bag12. The Tubes Should Have Multiple Printed Id/Segment Numbers, 13. Side Diversion Pouch, 14. 16 Gauge Ultra-Thin Walled And Straight, 15. Sharp Regular Margins And Beveled Tip22. Cpda-1 (49 Ml I.E. 14 Ml/100 Ml Of Blood) In Collecting Bag, 23. Sagm (100 Ml) In Satellite Bag,24. Clear & Colourless, 25. No Discolouration On Storage At Room Temperature 26. Manufacturer To Supply Anticoagulant Quality Check Certificate, 27. Non-Peal Off, Heat Sealed Labels, 28. Remain Attached Between Room Temperature To -800C With A Transparent Adhesive29. Date Of Manufacturing, Date Of Expiry And Lot Number Must Be Mentioned On Each Bag, 30. The Expiry Date Should Be At Least 2 Years From The Date Of Supply Of Blood Bags To The Institute31. Filled To Normal Capacity Shall Withstand An Acceleration Of 5000G For 30 Min At Temperature 4°C To 24°C Without Becoming Permanently Distorted And Should Withstand Temperature Up To -80°C Without Breakage.32. The Manufacturers Should Have Supplied Blood Bags Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years.Blood Bags * Blood Bags With Cpda1 - Single (350 Ml.)* , Blood Bags With Cpda1- Double (350 Ml.)* , Blood Bags With Cpda1- Double (450 Ml.)* , Blood Bags With Cpda1 - Triple (350 Ml.)* , Blood Bags With Cpda1 - Triple (450 Ml.)* , Triple Sagm Blood Bags (450 Ml.)* , Triple Sagm Blood Bags(350 Ml.)* , Transfer Blood Bags (300Ml.)* , Blood Bags (450 Ml.) With Pre Storage Leukocyte Reduction Filters * , Blood Administration Set With Filter* (25 Nos) , Rbc Leukocyte Reduction Filters (Lab Side With Transfer Bag)- 3Rd Generation* , Rbc Leukocyte Reduction Filters (Bed Side)- 3Rd Generation* , Platelet Leukocyte Reduction Filters (Lab Side With Transfer Bag)- 3Rd Generation* , Platelet Leukocyte Reduction Filters (Bed Side)- 3Rd Generation* , Paediatric Blood Bags With Cpda1 (100Ml)* , Blood Bag For Platelet Pooling By Buffy Coat Method With Leukoreduction Filter (4 To 6 Bags) , Platelet Additive Solution (500 Ml) , Penta Blood Bags With Cpda1* , Apheresis Kits For Plateletpheresis , Apheresis Kits For Therapuetic Plasma Exchange , Specifications For All Above Testing Kits From Item No: 204 To 2151. All The Above Mentioned Test Kits Should Be Duly Certified By Statutory Authorities Namely Drug Controller General Of India And Dghs For Use In Blood Banks 2. The Manufacturers Should Have Supplied Test Kits Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years.3. 4Th Generation Test Kits Mentioned Above Should Meet Standard Definitions, Parameters As Per Standard Text Books And Duly Certified As 4Th Generation Test Kits By Drug Controller Of India.Testing Kits*Hiv Elisa Test Kits* (96 Tests) , Hiv Elisa 4Th Generation Test Kits* (96 Tests) , Hiv Rapid Test Kits*(50 Tests) , Hcv Elisa Test Kits* (96 Tests) , Hcv Elisa 4Th Generation Test Kits* (96 Tests) , Hcv Rapid Test Kits*(50 Tests) , Hbsag Elisa Test Kits* (96 Tests) , Hbsag Elisa 4Th Generation Test Kits* (96 Tests) , Hbsag Rapid Test Kits Whole Blood/Serum*(50 Tests) , Syphilis Card Test*(100 Tests) -Tpha Method , Vdrl Rpr Test Kits*(100 Tests) , Card Test For Detection Of Pan Malaria (Pf & Pv) Specific Ldh Using Whole Blood * (25 Tests) , Specifications For Gel Card Centrifuge And Incubatorplacement Specificatons (From Item No 216 To 235)1. Thegel Card Centrifuge And Incubatorequipment Should Be Placed And Maintained Free Of Cost Against The Purchase Of Gel Cards Under Contract Agreement For One Year. 2. The Gel Card Centrifuge And Incubator Will Be Placed On The Condition That It Will Be Owned And Maintained By The Firm Entering Into The Contract For Supplying The Entire Immunohematology Items From 194 To 208 3. Equipment To Be Placed In The Premises Of Blood Bank At Jipmer Under A Guarantee For Free Maintenance For The Contract Period.4. Necessary Inspections And Calibration Certificates To Verify The Compliance Of The Placed Equipment For Immunohematology Workup5. Necessary Training Will Have Tobe Given To The Blood Bank Staff Members, If Needed, From Time To Time.6. Supplier Will Place Another Additional Equipment Of The Same Specification And Model Under The Same Terms And Conditions To Cater For Uninterrupted Trouble Free Services. 7. The Supplier Will Give An Undertaking That The Equipment Supplied Is Of The Latest Model And Version Available As On Date Of Entering Into The Contract. 8. The Supplier Should Ensure That Both The Equipments Are Functioning At All Times. In Case Of Failure Of Any One Of The Instruments The Downtime Should Not Be More Than 24 Hours. Only Under Extraordinary Circumstances The Downtime For The Equipment Can Be Increased By A Period, Which Should Not Exceed 72 Hours.9. Suppliers Should Quote For The All Above Items Mentioned Item No From 216 To 235. No Partial Quote Will Be Entertained. If Partial Quote, The Tender For The Above Items Will Be Summarily Rejected. 10. Authorized Distributor Certificate From The Original Manufacturer Should Be Provided.Immunology Kits ( Should Providesamples For Evaluation. Final Selection Will Be Based On The Results Of Such Evalaution. Any Demonstration Or Training Has To Be Provided Before Evaluation)*# Liss Diluent Ii (500 Ml) , Antibody Screening 3 Red Cell Panel-For Column Agglutination Technique (0.8%) , Antibody Screening 3 Red Cell Panel- For Conventional Tube Technique( 3-5% Cells) , Antibody Identification 11 Red Cell Panel For Column Agglutination Technique (0.8%) , Antibody Identification 11 Red Cell Panel- For Conventional Tube Technique( 3-5% Cells) , Antibody Identification 11 Red Cell Panel (Enzyme) For Column Agglutination Technique (0.8%) , Antibody Identitication Extendedred Cell Panel , Red Cell Preserving Solution For Serological Applications , Diluent-I, Modified Bromelin For Blood Grouping And Enzyme Tests (500 Ml) , Red Cell Elution Kits (10 Tests) , Coombs Gel Cardsfor Antibody Screening And Identification-(Igg+C3d)- 6 Tests Per Card , Coombs Gel Cards For Crossmatching(Igg+C3d)-6 Tests Per Card , Coombs Anti Igg Gel Cards-6 Tests Per Card , Abo/D+ Reverse Grouping Gel Cards (24 Tests) , Rh Subgroup +Cw+K Gel Cards (48 Profile) , Dc Screening Gel Cards (12 Profile)-Igg,Igm,Iga,C3d,Ctrl , Dat Igg-Dilution Gel Cards (12 Profile) , Dat Igg1/Igg3 Gel Cards (12 Profile) , Anti Igg1/Igg3/Igg2/Igg4 Dat Card , Nacl Gel Cards--6 Tests Per Card , For Reagents236-284 Igm Will Be Preferred Over Igg Rare Antiserasanti K Card-72Tests , Anti Jka Card-72Tests , Anti Jkb Card-72Tests , Anti Lea Card-72Tests , Anti Leb Card-72Tests , Anti Lua Card-72Tests , Anti Lub Card-72Tests , Anti M Card-72Tests , Anti N Card-72Tests , Anti S Card-72Tests , Anti S (Small) Card-72Tests , Anti Fya Card-72Tests , Anti Fyb Card-72Tests , Coombs Gel Cards For Direct And Indirect Antiglobulin Testing)-6 Tests Per Card , Check Cell , Panocell 16 , Panoscreen 3/4 , Gamma Elu Kit Ii , Gamma Ega Kit , Gamma Lectin System , Gamma Quin , Freeze Dried Papain , R.E.St. , W.A.R.M. , Gamma Peg , Anti-Ina , Anti Inb , Anti-Mia , Anti Mib , Anti K Igm (1-5Ml) , Anti C Igm (1-5Ml) , Anti C (Small C) Igm (1-5Ml) , Anti E Igm (1-5Ml) , Anti E (Small E) Igm (1-5Ml) , Anti K (Small K) Igm (1-5Ml) , Anti Fya(1-2Ml) , Anti Fyb(1-2Ml) , Anti Jka(1-2 Ml) , Anti Jkb (1-2 Ml) , Anti M (1-2 Ml) , Anti N (1-2Ml) , Anti S (1-2Ml) , Anti S (Small S) (1-2 Ml) , Anti Lea (1-2 Ml) , Anti Leb (1-2 Ml) , Anti Lua (1-2Ml) , Anti Lub (1-2Ml) , Anti P (1-2 Ml) , Anti I(1-2 Ml) , Blood Bags For Total Automated Blood Component Extraction* See Also Above As For Blood Bags Specificationsnote:1. Samples/Brochure Listing Product Details/Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender.2. In Case Of Non-Receipt Of Samples Within One Week After Display Of E-Tender, An E-Mail Remainder (Mentioned In Tender Form) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled.3. Selection Will Be Made After Evaluation Of Samples/Brochure, Certificatetop And Bottom Quadra And Penta Blood Bags For Totally Automated Component Extraction.*- 350Ml (For Specification Refer Tender Document) , Top And Bottom Quadra And Penta Blood Bags For Totally Automated Component Extraction.*- 450Ml (For Specification Refer Tender Document) , Molecular Typing Reagents Dna Blood Extraction Kit , Primer (500 Ml) , Ssp Kits For Abo Type , Ssp Kits For Rh Type , Ssp Kits For Abo Type- Variant , Ssp Kits For Rh-Partial D , Ssp Kits For Weak D , Ssp Kits For Kkd Type , Ssp Kits For Mns Type , Ssp Kits For Minor Blood Group Type , Ssp Kits For Hpatype , Ssp Kits For Hna Type , Tbe Buffer-1L , Ethidium Bromide , Ethanol-70% , Microtips- 20 To 200 Microlitre (1000 Nos) , Microtips -1Ml-500Ml , Agarose Powder , Bromophenol Blue , Acrylamide , Ammonium Persulphate , Sodium Dodecyl Sulphate-10% , Ammonium Chloride , Ammonium Bicarbonate , Protininase K , Boric Acid , Consumables For Chemiluminscence Systemnote: 1. Samples/Brochure Listing Product Details/Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender.2. In Case Of Non-Receipt Of Samples Within One Week After Display Of E-Tender, An E-Mail Remainder (Mentioned In Tender Form) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled. 3. Selection Will Be Made After Evaluation Of Samples/Brochure, Certificatetesting Kits For Fully Automated Immunoassay System – Chemiluminscence, Floor Model Hiv – Fourth Generation Kit With Fourth Generation Controls, Calibrators From Same Manufacturer. (Who P24ag Int Std90/636) < 0.90Iu/Ml) (100 Tests) (For Specification Refer Tender Document) , Hbsag - Capable Of Qualitative Detection Of Hepatitis B Surface Antigen (Hbsag) With Excellent Mutant Detection. (100 Tests) (For Specification Refer Tender Document) , Hcv - Capable Of Qualitative Detection Of Antibody To Hepatitis C Virus (Anti-Hcv). (100 Tests) (For Specification Refer Tender Document) , Syphilis - The Assay Should Be Able To Detect Treponema Pallidum Specific Antibodies Of Both Igm And Igg (100 Tests) (For Spec Please Refer Tender Document) , Equipments , Water Bath-Laboratory Rangespecifications:1. Dimensions (External) 40 Cm X 40 Cm X 20Hcm (Approx.) 2. Dimensions (Internal) 30 Cm X 30 Cm X 15Hcm (Approx.) 3. Double Wall Insulated Metal Body, 4. Temperature Range 37ºc -100ºc, 5. Digital Temperature Control And Display6. Temperature Precision 0.1ºc, 7. Should Have Provision To Maintain Uniformity Of Temperature8. Should Have The Provision To Incubate Racks Of All Size Of Test Tubes, 9. Illuminated On Switch, 10. Indicator Light Showing Heating Element Operation, 11. Temperature Control 12. Demonstration Of Performance Of Equipment Is Compulsory In Nearby Area Failing To Which Will Lead To Disqualification., 13. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision 14. Should Be Bis/Ce/Fda Approved Product, 15. Warranty-02 Yrs. , Blood Transportation Box Specification: 1. Extended Cold Life, 2. Fixed Two Temperatures Setting Adjustable To +4°C And +22°C. 3. Capacity To Accommodate Minimum 48 Blood Bags Of 450 Ml.C33, 4. External Dimension Of Each Transportation Box Should Be Within 1000 -1500Mm (L)X 800-1000 Mm (W)X 600- 700 Mm (H)5. Chest / Vertical Cabinet With Built In Handles And Hinged Door., 6. Body Material Should Be Polyethylene (Corrosion Free)7. Smooth Castors With Stabilizers For Flexibility And Movement., 8. Ambient Working Temperature -2°C To +43°C, 9. Main Power Switch.10. Microprocessor Based Temperature Controller With Integrated Audio Visual Temperature Alarm Function On Digital Monitoring Display. 11 .Separate Selector Switch For + 4°C And +22°C Temperature Settings., 12. Nominal Dc Power 12 / 24 Volt And Nominal Ac Power 100 – 240 Volt, 50/60Hz. 13. Automatic Ac / Dc Power Supply Selection., 14. Automatic Cooling / Heating Operation., 15. Air Cooled Hermetically Sealed Dc Compressor., 16. Vehicle Fixation Kit.17. Controlled Fan Cooling System For Constant Air/Temperature Distribution., 18. For Storage Of Blood Bags, Minimum Two (2) Wire Basket Should Be Provided In Each Box.19. Power Alarm Audio And Visual By Led. Audio Alarm Can Be Switched Off. Temperature Audio And Visual High And Low Alarm By Led.20 .Minimum Polyurethane Insulation Cfc Free For The Cabinet And The Door., 21. Warranty-02 Yrs. , Binocular Microscope (Without D.G) Specification: 1. Head:Binocular 30° Inclined And Rotatable 360° 2. Eyepieces:10X 20Mm Fov 3. Nosepiece:Reversed, Quadruple 4. Objectives:Plan Achromat 4X, 10X, 40X, 100X Oil5. Condenser:1.25 N.A. 6. Stage:Rackless Mechanical Stage 7. Focusing:Coaxial Coarse/Fine Focus System With Limit Stopper And Torque Adjustment 8.Focusing:Coaxial Focusing System With An Adjustable Tension Control And Upper Limit Stop To Prevent Accidental Damage To Slides; All Metal Gears, Brass Fine Focus Gear 9. Illumination:Led Illumination Variable With Cord Holder 10. Warranty: 5 Years , Table Top Centrifugespecification: 1. Speed Max : 100-6000 Rpm, Rcf: 5030Xg, 2. Automatic Rotor Identification.3. Heavy Duty Brushless Induction Motor For Low Vibration And Noise < 65 Db, 4. Presetting Of Speed And Time And 0-99 Minutes Digital Timer5. Safety Lid Interlock, 6. Digital Speed Indication, 7. Digital Indicator Cum Controller, 8. Dynamic Break And Imbalance Detector With Cutoff 9. Angle Head Rotor With 24 X (5-15Ml Tubes) With Appropriate Tube Adapters Should Achieve Rpm 4500 Or More & Rcf 3300 G Or More 10. Rust Proof Stainless Steel Inner Chamber, 11. To Work On 220 Volts Ac, 50 Cycles12. To Be Supplied With Suitable Servo Controlled Stabilizer, 13. Manufacturer Should Be Iso 13485 Certified., 14. Warranty - 2 Years , Rh View Boxspecification: 1. Built-In Temperature Indicator For Easy, Accurate Monitoring Of Viewing Area. Viewing Area Temperature Adjusts Easily To Compensate For Ambient 2. Temperature Changes. (Range: 45°C To 50°C) 3. Rh Slides Reaches Temperature Of 37°C To 39°C In Two Minutes, Eliminating Wasted Heat Up Time. 4. Soft, Fluorescent, Glare Free Light Provide Uniform Illumination Of Slide Contents. 5. View Box Can Be Gently Rocked Using Large Knob On Support Cradle. 6. Sturdly, Easy-To-Clean Metallic Powder Compact Case. Utilizes Minimal Bench Space. 7. Meets Rh Slide Test Standard Set By The Aabb., 8. Unit Conveniently Includes Three-Wire Cord And Plug. 9. Light - Fluorescent Glare Free, 10. Temp Display - 37°C ± 2°C11. Power - 220 V - 50Hz, 12. Warranty - 2 Years , Specific Gravity Meter Specification: 1. Should Read Specific Gravity From 1.000 To 1.140?2. Hydrometer Should Have A Solid Shot-Weighted Float And An Extra Long Stem For Grasping3. Jar Should Be 5 In. (13Cm) High With Extra Wide Base 4. Warranty - 2 Years , Digital Specific Gravity Meter Specification: 1. Should Read Specific Gravity From 1.000 To 1.100?2. Digital Display3. Warranty - 2 Years , Hot Air Oven - Laboratory Usespecification:Operational Requirementsmicroprocessor Based System With Pid-Temperature Controller With Integrated .Auto Diagnostic System With Fault Indicator.Technical Specifications1. External: Stainless Steel Casing :Insulated Stainless Steel Door With Locking And Rear Zincplated Steel 2.Interior - Internal Volume More Than 200 Liters Easy-To-Clean Interior, Made Of Stainless Steel,With Supports On The Three Sides For Three Adjustable Perforated Stainless Steel Shelves 3. Forced Air Circulation By Quiet Air Turbine/Fan To Ensure Uniform Temperature 4.Fitted With Load Indicator And Safety Thermostat Take Over Indicator Lamp. Lcd/Led Indicator5. Temperature Variation +/- 1 Deg C., 6. Temperature Range- Ambient To 250 Deg C., 7. Output Available For Data Acquisition. Environmental Factors: 1. The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 -50Deg C 2. The Unit Shall Be Capable Of Operating Continuously In Ambient Temperature Of 10 -40Deg C And Relative Humidity Of 15-90%3. Warranty - 2 Years , Agglutination Viewers For Blood Bank Specification: 1. Designed For Use In Blood Typing, Cross Matching, Antigen Typing, Titers And Other Agglutinations Tests 2. Illuminates Test Tube Contents Through The Use Of A 5-Watt Bulb From Above And A Magnifying Mirror From Below3. Easy To Use Side-Mounted On/Off Switch 4. Flexible Neck Allows For Easy Manipulation Of Light Source 5. Input: 120V 60 Hz, 18W; Output: 12Vac 500Ma6. Warranty: 2 Years , Cold Chain Boxes (4 Pack Vaccine Carriers) To Transport Blood To Wards (Blue - 150 Nos, Pink-150- Nos, Yellow - 100 Nos, White-100 Nos)Specification: 1. Storage Capacity: 1.63 Litres2. Lid Type And Fixings: Removable 3. External Surface Material: Hdpc4. Internal Lining Material: Hips5. Insulation Material: Cfc-Free Polyurrethane 6. Insulation Thickness: 35-38 Mm7. Number Of Ice Packs: 4 X 0.4 Litres 8. Cold Life Without Opening , Tested By Who Approved Laboratory: 4 Hours At 6°C 9. Warranty: 2 Years , Vdrl Shakerspecification: 1. Platform Size 12” X 12” For Keeping Reaction Trays.2. Timer With 0 To 30 Minutes For Control Of Shaking Duration With 1 Minute Interval.3. Should Have Built In Speed Regulator With Maximum Speed Of 150-180 Rpm. 4. Warranty: 2 Years , Plasma Thawing Bathspecification: 1.Unit Should Thaw Atleast 8 Plasma Units In Less Than 20 Minutes. 2.Digital Electronic Bench Top System With Led Display. 3.Should Have 2 Separate Basket Asemblies Securely Holding Plasma Bags4.Water Bath Based Operating System At A Preset And Precise Temperature Of 37°C ± 0.5°C5.Should Give An Alarm When The Plasma Bags Are Thawed. 6. Provision For Programmable Time Setting For Length Of Thawing With Audio Completion Signal.7. Should Have Audio Visual Over-Temperature Alarm System8. Should Have A System To Drain The Chamber. 9. Should Have A Deep Thawing Chamber With A Stirrer10. Warranty: 2 Years , Blood Bag Digital Weighing Balance - Double Pan Specification: 1. Should Be An Electronic Differential Scale. 2. Weight Measurement - 0-2500 Grams (Range) 3. For Weighing 2 Blood Bags Simultaneously For Balancing For Centrifugation Purposes & Should Display The Difference Of Two Loads.4. Maximum Weight Difference - 2500 Grams, 5. Weight Sensors - Load Cells 6. Weight Display Panel - 4-Digit Led Display, 7. Weight Calibration Tolerance - +/-1 Gram 8. Decimal Truncation Error - 1 Gram, 9. Total Accuracy Of Display - +/-2 Grams 10. Weight Accuracy - 4 Grams, 11. 18V Dc (A/C Power Adapter 100-120/220-240 V A/C In) 12. Power Consumption - 5 Watts, 13. Warranty - 2 Years , Blood Bag Digital Weighing Balance - Single Panspecification: 1. Should Have A Microprocessor Based Single Pan Analytical Balance With High Accurary And Precision Is Required 2. Should Have Weigh Accuracy Of Upto Iii Decimal Place, 3. Should Have A Auto-Self Calibration Facility4. Should Have A Auto Zero Setting., 5. Shoud Have One Touch Calibrationj.6. Should Have Weighing Capacity Upto 500 Gm, 7. Should Have A Readability And Repeatability 0.001/G 8. Should Have Stabilization Time <5 Secs., 9. Should Have Lcd Display For Showing Weight. 10. Power Input To Be 220 V To 240 V. Ac, 50 Hz 11. Should Provide With Suitable Ups With Maintenance Free Batteries For Minimum One Hour Back Up, 12. Warranty: 2 Years , Hemocue Testing Systemspecification: 1. Should Be Able To Measure The Hb Using Blood From Finger Prick (Should Be Based On Azide Methohemoglobin Method).2. Should Be Capable Of Displaying Results Within 1 Minute, 3. Accuracy ± 1 %4. Disposable Cuvettes. Cost Of Consumables To Be Quoted Along With This Tender As It Will Be Considered For Financial Comparison., 5. Should Be Portable And Should Have The Battery Backup For 8 Hours Or More With Provision Of Electric Operations .6. Factory Calibrated And Calibration Should Be Verified Automatically Time When The Instrument Is Turned On., 7. Should Have The Memory To Store At Least 500 Results With Date And Time And Should Be Able To Transfer The Results To Pc.8. Should Be Us Fda Or European Ce Class-2A Or Bis, 9. Should Be Iso 13485 Approved Product., 10. Original Literature Of Equipment Should Be Submitted., 11. Warranty: 2 Years , Table Top Incubatorspecification: 1. The Incubator Should Be Suitable For Incubation Of Elisa Plates Of Tti Markers, 2. Dimensions Should Be Approximately 355 X 355 X 355 Mm3. Should Be Sturdy, Double Walled Construction With Complete Inner Chamber Made Of Anodized Aluminum Or Highly Polished Stainless Steel. 4. Gap Between The Walls Should Be Filled With Special Grade Insulation Material For Proper Insulation And To Avoid Heat Losses. 5. Should Have Inner Chamber Fabricated With Ribs For Adjusting Shelves To Convenient Height., 6. Should Be Supplied With 2 Or 3 Removable Shelves. 7. Heating Element Should Be Placed At The Bottom And Side Ribs For Uniform Temperature All Over The Space.8. Should Have The Temperature Control By Thermostat From 20ºc Above Ambient To 50ºc ±0.5ºc. Temperature Control Knob Should Be Graduated In Degrees Centigrade. 9. Should Be Provided With Air Ventilators Port On Sides At Top For Ventilate Fumes & To Assist Convection Process. 10. The Equipment Should Be Provided With A Panel Having A Thermostat Control Knob, On/Off Switch And Indicator Light. 11. Firm Should Also Provide The Relevant Temperature Calibration Certificate For The Equipment From Any Nabl Accredited Lab., 17. Warranty: 2 Years , Domestic Refrigerator Specification: 1. Capacity: 300 Ltrs ( Double Door)2. Material: Stainlees Steel Puf3. Interior Light4. Reversible Door Opening 5. Condensation Drain 6. Voltage: 220 V 7. Warranty: 2 Years , Bp Apparatus Self Check Dial Arm Type Sphygmomanometerspecification: 1. Should Be Aneroid Type, 2. Should Have Isi Mark., 3. Should Have A Measuring Range From 0 To 300 Mmhg 4. Should Be Provided With Adult Arm Cuffs Of Size Medium & Large And Paediatric Cuff. 5. The Dial Mano Meter Markings And Graduations Should Be Permanent And Clearly Visible And Filled With Pigments, With Diameter Of Minimum Diameter Of 160 Mm 6. Body & Bazel – Aluminium Die Casted (Powder Coated), Screw Type Bazel, 7. Sensing-Corrogated Phosphorous Bronze Twin Capsule Bellows., 8. Movement Mechanism – Brass, 9. Connection : Brass, Nickel Plated For 3-4 Mm Rubber Hose 10. Dial – Aluminium, 11. Pointer – White Coated, Thin & Sharp Made Of Phosphorous Bronze, 12. Window Lenses – Clear Plastic. 13. All Plastic Parts, If Any Used Should Not Crack, Flake, Peel Or Disintegrate In Normal Use., 14. The Inflating Rubber Bag Should Be Capable Of Withstanding An Internal Pressure Of 450 Mmhg Without Leaking.15. The Inflating Bulb Should Be Soft And Should Not Have Any Joints Or Ridges., 16. The Fastening Arrangements Of The Cuff Should Be Of Hook And Loop Type (Velcro) 17. The Threading And Fastening Arrangement Of The Cuff Should Show No Sign Of Slip Or Failure When Subjected To The Maximum Test Conditions.18. The Rubber Tubes Used Should Have An Internal Diameter Of 3 ± 0.5Mm And The External Diameter Should Not Be Less Than 8Mm., 19. The Tubes Should Be Fitted With Male And Female Leur Connectors.20 .Should Provide A Carry Bag To Keep The Whole System Safe And Sound. All Parts Should Be Replaceable In Case Of Breakage., 21. Warranty: 2 Years , Insecticutors Description: Insecticutors Are Required In Bleeding Area, Donors Screening Area, Issue Section For Controlling Flies And Other Insects Which May Contaminate Blood Components. Specification: 1. Powder Coated Body For Long Lasting & Durability2. Phillips Uv Tubes 3. Copper Wiring And Copper Choke For Electricity Saving4. Rugged 3 Kv Transformer 5. Zinc Coated Grid To Prevent Rusting 6. Collection Tray For Killed Flies7. Pvc Coated Guard To Avoid Shock8. Low Power Consumption 9. Warranty: 2 Years , Hot And Cold Water Dispenser For Drinking Purposedescription: Provides Safe Drinking Water For Blood Donors 1) Provides Cool Drinking Water At Blood Donation Camps 2) Decreases Chances Of Vasovagal Blood Donor Reactions. 3) Positively Enhances Donor Reaction Affecting Donor Retention. Specification: 1. Quiet Operation, Runs On Electricity And Easy To Clean., 2. Anti Corrosive And No Costly Maintenance3. Plain / Hot / Cold Water Option Available, 4. Compact Design Taking Very Less Space.5. Long Lasting Plastic Front Panel And Faucets, 6. Convenient Removable Drip Tray 7. Led’S To Indicate Primary Function, 8. Low Power Consumption 9. Bimetal Sensors To Ensure Overheating Protection, 10. Weight Less Than 20 Kg, Compact And Mobile 11. Spill Proof Bottle Holder - Optional, 12. Warranty: 2 Years , Vein Illumination Device Description:It Is Used To Visualize Subcutaneous Veins By The Phlebotomist. Useful For A) Prevent Deferrals Because Of Poor Venous Access B) Preventing Loss Of Unit Because Of Inefficient / Insufficient Collection C) Useful For Training Phlebotomist And Building Their Confidence D) Enhances Donor Experience E) Decreases Chances Of Apheresis Procedure Failure F) Non Contact Venous Assessment For Phlebotomyspecification: 1. Based On Infra Red Technology, 2. Clearly Displays Subcutaneous Vasculature Without Any Contact With Skin3. No Need For Calibration Or Adjustments, 4. Includes Charging Cradle And Power Supply Cord 5. Run Time Of At Least Two Hours Per Charge, 6. More Than 300 Vasculature Visualizations Per Charge7. Accessories Available Like: 1) Stand For Hands Free Operation With And Without Charger 2) Clamps For Fixing For Hands Free Operation 3) Mobile Hands Free Operation 6) Padded Carry Case With Shoulder Sling 4) Belt Carry Case., 8. Warranty: 2 Years , Microplate Shaker Specification:1. Platform Size 12” X 12” For Keeping Reaction Trays.2. 4 Number Of Microplates Can Be Kept At A Time3. Timer With 0 To 30 Minutes For Control Of Shaking Duration With 1 Minute Interval.4. Should Have Built In Speed Regulator With Maximum Speed Of 150-180 Rpm. 5. Warranty: 2 Years , Vacuum Cleaner (Hand Held) Specification:1. Special Features: 2 Tier Radial Cyclones, Direct-Drive Motor, Washable Pre-Motor Filter 2. Cleaning Method: Dry 3. Cleaner Type: Handheld 4. Included Tools: Combination Nozzle, Extension Hose, Futon Tool, Gap Nozzle, Mini Motorized Tool 5. Warranty: 2 Years , Phlebotomy Mannequinspecification:1. Advanced Venipuncture And Injection Arm - White Which Gives Complete Venous Access For Phlebotomy As Well As Iv Therapy, Plus Sites For Intra-Dermal And Intramuscular Injections.2. Injectable Metacarpal, 3. Digital And Thumb Veins4. Median Cephalic, 5. Median Basilic 6. Median Cubital Veins, 7. Basilic 8. Cephalic, 9. Accessory Cephalic10. Median Antibacterial Veins, 11. Deltoid Muscle, 12 .Warranty: 1 Year , Microplate Centrifuge Specification:1. Speed: 300-3000 Rpm With Increment Of 10 Rpm, 2. Max Rcf: 2000 X G Or More, 3. Automatic Rotor Recognition And Imbalance Detection. 4. Manufacturer Should Provide Compatible Set Of Microplates With Specifications Of The Same., 5. Timer: 0 To 60 Mins. Continuous Operation 6. Drive System: Brush Less Induction Drive, 7. Noise Level At Max Speed Should Be Less Than 60Db 8. System Should Have Safety Features Like Lid Lock And Interlock9. System Should Have Microprocessor Controlled Pre-Selection And Display Of Speed And Time.10. Manufacturer Should Be Iso 13485 Certified., 11. The Centrifuge Should Be Provided With The Following Accessories 12. Speed: 300-4000 Rpm Or More, 13. Rcf: 2000X G Or More 14. Capacity: Should Be Able To Centrifuge 2 Microplate Of 96 Wells 15. Rotor Head Should Be Available With The Firm For Immediate Replacement, 16. Warranty: 2 Years , Cryoprecipitatebath Specification:The Cryo Bath Is Designed For Rapid And Uniform Thawing Of Fresh Frozen Plasma Bags At 4 ºc +/- 0.2 ºc Such That The Cryoprecipitate Remains Solid, And A Cryosupernatant Liquid Is Formed That Can Be Transferred Out Of The Bag In Order To Manufacture Cryoprecipitate Units.Ii Operational Requirements: 1. Floor Standing System, Mounted On Lockable Castors. 2. Should Be Having Capacity Of 12-18 Bags Per Run For One Cycle. 3. Should Be Able To Thaw Ten To Twelve Plasma Units (Ffp ~200-300 Ml) At A Time. 4. Should Have Stainless Steel Tank Of 22G, And An Insulated Lid Covered With 20G Stainless Steel, 5. Should Be Fitted With Compartments That Have Removable Rack/Tray System For Securely Holding The Plasma Bags And Ensuring That Entry Ports Are Not Contaminated With Water.6. Should Be A Microprocessor Controlled Water Bath Based System Operating At A Temperature At 4 ºc +/- 0.2 ºc Or Alternative Can Also Be Safely Set At 37 ºc +/- 0.2 ºc.7. Digital, Electronic System With Provision For Programmable Temperature Adjustment Setting With Led Display With Temperature Resolution Of 0.1 ºc, 8. Should Not Take More Than 2 Hours At Full Loads To Thaw The Plasma Into Cryosupernatant. 9. Should Have A Deep Thawing Chamber With A Stirrer For Water Circulation & Gentle Rocking For Uniform Heating By High Capacity Pump, 10. Should Have A System To Drain The Chamber Without Lifting Or Tilting, And Should Be Fitted With A Shut Off Valve.11. The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 -50Deg C And Relative Humidity Of 15-90% Without Getting Rusted. 12. Compatible With Input Voltage: 240V 50 Hz Single Phase Ac14. Should Have An Integrated Voltage Stabilizer Or External Servo Stabilizer Of Appropriate Ratings Meeting Isi Specifications (Input 160-260 V And Output 220-240 V And 50 Hz). 15. Resettable Overcurrent Breaker Shall Be Fitted For Protection, 16. Warranty: 2 Years , Blood Collection Monitorspecification:1. The System Is Used To Collect Donated Blood From The Donor At The Same Time Mixing The Blood For Quality Collection Of Blood.2. Pre-Selection Of Volume To Be Collected. Tarring Of Bag Volume Before Collection. Tarring Range: 0 – 600 G. Automatic Storage And Recall Of Set Volume. Measure Volume With Best Accuracy 3. Led Indication On Commencement Of Collection., 4. Led Indication And Audible Alarm At The End Of Collection., 5. Indication Of Time Taken For Collection.6. Indication Of Blood Flow With Audio Alarm When Blood Flow Is Higher Or Lower Than Desired. Continuous Display Of Collected Volume, Flow And Time During Collection7. Automatic Clamping At Termination Of Preset Volume Collection, 8. Automatic Release Of Bag When Lifted., 9. Continuous Agitation Of Blood Bags During Collection: 12 – 16 Rpm., 10. Easy Provision To Change Preset Volume. 11. Should Operate On Mains As Well As Rechargeable Battery. On Battery It Should Operate For A Minimum Of 5-8 Hours., 12. Should Be Less Than 5 Kg 13. “ Pause Facility” To Pause The Collection. 14. Optional- Memory To Store Donation Data Such As Donor Number, Name Of Operator, Volume Collected, 15. Should Measure Volume With Accuracy Less Than 1 %16. The Unit Shall Be Capable Of Operating Continuously In Ambient Temperature Of 10 - 400 C And Relative Humidity Of 15-90%, 17. Power Input To Be 220-240V Ac, 50Hz As Appropriate Fitted With Indian Plug18. Should Be Technologically Advanced With Modern Blood Collection Scale And Mixer. It Should Be Light Weight & Portable., 19. Warranty: 2 Years , Gelcard Incubator Specification:1. Dedicated To Centrifuge Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”.2. Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 3. Incubator Should Have The Capacity To Incubate The Gel Card And Test Tubes For 37° 4. Automatic Balance Control 5. Warranty: 2 Years , Gelcard Centrifugespecification:1. Dedicated To Centrifuge Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 2. Centrifuge Should Have Option To Run Gel Card And Test Tubes, 3. Silent Centrifuge For Holding 24 Cards. Each Card With 6 Micro Wells 4. Automatic Balance Control, 5. Centrifugation Time: 10 Minutes Or Less 6. Speed, Time And Functions Are Digital Display, 7. Typing System Cards With ‘V” Shaped Bottom For Clarity In Results. 8. Monitored By Microprocessor., 9. Suitable Rpm.10. Gel Cards Should Be Made Available For Abo& Rh Grouping, Rare Blood Group Antigens, Coombs Test, Pnh, Partial D Typing And Etc., 11. The Price Of The Card Should Be Frozen For A Minimum Period Of Three Years12. 110V-240V/50Hz- 120Hz., 13. Bis/Ec Conformity.11. The Price Of The Card Should Be Frozen For A Minimum Period Of Three Years14. Enough Diluents And Abo Grouping Cards For 100 Tests And Coomb’S Card For 400 Tests With Adequate Diluents., 15. Warranty: 2 Years , Colorimeter- For Hemoglobin Estimation By Drabkins Method Specification:1. It Should Be Portable & Work On 220V & 5 Amp.2.It Should Have Built In Minimum Of 3 Filters With 500, 540 And 600Nm 3. It Should Come With Minimum Of 5 Cuvettes4. Display Should Be Digital5. It Should Be Easily Calibrated 6. Warranty-2 Years , Digital Ph Meter With 3 Standard Buffersspecification: 1. Should Have Working Range From 0 To 14., 2. Should Have Resolution 0.1/0.01 Ph 3. Should Have Temperature Compensation Zero To 100 Degree C With Atc4. Should Have Rs.232C Output And Supply Data Connector Cable5. Should Have Automatic Calibration Facility., 6. Should Have 3 Stage Calibration.7. Should Have Digital Display With 0.001 Ph Unit Readability, 8. Should Supply Tri-Combination Ph/Atc Electrode 9. Should Supply Electrode + Standard Buffer Solution (Ph 4.0, 7.0, 10.01 X 50Ml For Each Bottle) + Standard Electrode Holder +Ac /Dc Adaptor. 10. Should Be Provided With An Electrode Holder/Arm With Smooth Movement, 11. Warranty - 1 Year , Blood Bag Multifunction Hand Striper, Sealer And Cutterspecification: 1. The Body Should Be Made Of Pure Stainless Steel 2.The Handles Should Be Covered With Plastisol 3. Weight Should Be Less Than 200 Gms. 4. Should Be Certified By Ce And Iso 9001 5. Easy To Handle, Strip, Mix, Seal And Cut During Non Use 6. Warranty: 2 Years , Induction Stove Description: Required To Boil Milk And Water For Donor Refreshment Specification: 1. Single Stove, 2. Heating With Warming Facility3. Child Lock, 4. Capable Of Cooking Under Fan/In Ac 5. Protection From Over Heating, 6. Surface Safe To Touch During Operation 7. Protection From Spilling Of Food Items, 8. Programmable For Time And Temperature 9. One Touch Fixed Program And Fixed Timer Facility, 10. Digital Display11. Auto Menu, 12. Utensil Detection, 13. Power Saving 14. Bis/Ce/Iso Certified, 15. Warranty - 2 Years , Sonicator - Ultrasoundcleaning Bath Specification: 1. Fitted With Microprocessor Based Digital Temperature Indicator-Cum-Controller At Any Temperature From Ambient +5ºc To 60ºc.2. Should Have A Digital Timer With Settable Range From 0-15 Min Or 0-30 Min (Depending Upon The Capacity Ordered). 3. Extensively Protected Electronic Circuits Means Longer And Safer Operations., 4. High Frequency Electrical Energy Is Converted Into Ultrasound Waves By Means Of Ultrsonic Transducers. 5. Compact, Rugged And Highly Durable System., 6. Efficiency Of 90% Permits Maximum Cleaning Action, Low Power Consumption.7. Extensively Protected Electronic Circuits Means Longer And Safer Operations., 8. Automatic Frequency Tuning For Maximum Output. 9. Input Range Of 170Vac-270Vac, Highest Immunity To Input Supply Variations.10. Pre-Set Auto Degassing Function., 11. Pulse Sweep Power For Better Effective Cleaning.12. To Work On 220/230 V Ac Supply., 13. Warranty: 2 Years , Spectrophotometerspecification: 1. Wave Length Range: 190 To 1100 Nm 2.Spectral Band Width: 1 Nm3. Wave Length Display: 0.1 Nm Increments 4. Wave Length Accuracy: ± 0.1 Nm 5. Photometric System: Double Beam6. Photometric Accuracy: ± 0.002 Abs 7. Baseline Statbility: Less Than 0.0003 Abs8. Noise Level: Within 0.00005 Abs Rms Value (At 700Nm) 9. Warranty: 2 Years , Plasma Expressormanual Specification: 1. Should Be Suitable To Manually Express Blood Components (Plasma, Platelets) From Collection Blood Bags. 2. Front Panel Should Be Spring Loaded To Apply Uniform Pressure On Container Causing Transfer Of Fluid. 3. Compression Plate Should Be Made Of Durable Transparent Acrylic4. Metal Used For The Apparatus Should Be Non-Corrosive And Can Be Cleaned With Antiseptics 5. Base Portion And Vertical Surface Should Be Made To Have Better Strength And Longlasting Performance 6. Quality Certification: Iso 13485 Certified7. User?S List Should Be Attached With Satisfactory Report For The Last Three Years From Three Users With Contact Details. 8. Demonstration Of Performance Of Equipment Is Compulsory In Nearby Area Failing To Which Will Be Disqualification.9. Warranty - 1 Year , Dry Block Incubator Specification: 1. Basic Device Without Exchangeable Thermoblocks. 2. 16 Tube Holders- Test Tube Size 12 X 75Mm And 12 X 100Mm3. Temperature Control Range:-50C To 99 º C. 4. Accuracy Of Temperature Control : At 0º C ± 1.0ºc 5. At 37º C± 0.5ºc And At 90º C± 1.0ºc, 6. Heating-Up Speed: Approx. 5º C / Min 7. Range Of Time Phases 0:01To 99.59 Hrs, 8. Power Supply: 100 - 240 V, 50 - 60 Hz, 9. Precise Temperature Control10. The Temperature And Run Time Can Be Programmed Individually Upto 4 Temperature Levels And 4 Time Phase In Succession, 11. Warranty - 2 Years , Vertical Reagent Refrigeratorspecification: 1. Storage Capacity: Should Be At Least 300 Liters Capacity, 2. Set Temperature 4ºc With Temperature Range 2ºc To 6ºc And Adjustable With Setting Accuracy Of ±0.5ºc3. Refrigeration: Non- Cfc Cooled Refrigeration, 4. Should Have Good Insulation To Maintain Required Temperature5. Should Have Good Metallic Door With Removable Shelves Inside For Easy Cleaning.6. Microprocessor Based Temperature Controller With Integrated Audiovisual Temperature And Power Alarm Function With Digital Monitoring Display.7. Safety Features: Audio Alarm For All The Following Parameters Should Be There: Temperature Fluctuation & Power Failure, Set Point Alarm, Low Alarm Point, Door Opening Audio And Visual Display Alarm. 8. Safety Thermostat To Avoid Negative Temperatures., 9. Should Have Battery Back Up For Temperature Display And Power Alarm., 10. Interval Temperature Hold Over Time In Case Of Power Failure Should Be At Least 1.5 Hours. 11. Should Have Castor Wheels With Locking Facility, 12. Original Literature Of Equipment Should Be Submitted., 13. Manufacturer Should Be Iso 13485 Certified. 14. Firm Should Supply The Relevant Calibration Certificate For The Equipment From Nabl Accredited Lab., 15. User?S List Should Be Provided With Satisfactory Report For The Last Years From Three Licensed Blood Banks With Contact Details.16.Firm Will Have To Supply The Stabilizer If Required Along With The Equipment Free Of Cost., 17. Bidder Have To Arrange Demonstration Of The Quoted Model (If Required)18. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision, 19. Should Provide Datalogger Or Circular Chart Recorder, 20. Warranty: 2 Years , Blood Bag Tube Sealer (Table Top)Specification: 1.Blood Bag Tube Sealer Is A Compact Equipment To Seal The Blood Bag Pilot Tube By Radio Frequency Sealing System, 2. Should Be Capable Of 750 Seals Per Hour Or 1500 Sealing Per Charge Battery. Capable Of Sealing Tubes Of Various Manufacturers Of Blood Bag.3. Should Be For Table Top Use., 4. The Sealing Time Should Be Adjustable Between 0.5-5 Seconds, 5. Sealing Triggering Should Be Automatic 6. Should Detect Wet Tubes, Leakage Or Any Sealing Defect., 7. Should Have Indication Lamps For “Sealing Process” On Handle As Well As Main Unit And Led To Show The Battery Test., 8. No Warm-Up Time Should Be Required.9. Should Ensure Easy Separation Of Tube Segments After The Sealing. Should Have Separable Rupture Line., 10. System Should Run On Both Mains And Battery (More Than 10Hrs. Back Up When Fully Charged).11. Should Be Light Weight Less Than 3 Kg With Carry Bag., 12. Tube Thickness Of Up To 6 Mm Of Diameter And Wall Thickness Up To 0.75 Mm Can Besensed And Sealed Automatically.13. Should Be Able To Making Wide Seal Of 2Mm Thickness., 14. Indication Of Seal In Progress Should Be There., 15. Sealing Time Should Be Less Than 2 Sec., 16. Separable Rupture Line To Separate Tube After Sealing.17. Should Ensure Safety Against Electrical Shock Hazards, Fire Hazards, And Mechanical Hazards. 18. There Should Be No Hemolysis Of Blood In The Tube Segments, 19. No Warm-Up Time Should Be Required, 20. Should Be Able To Withstand Voltage Fluctuation, 21. It Should Be Easy To Clean. 22. Should Be Easy To Handle With The Grip To Hold The Sealers, 23. Splashguard To Protect User From Any Kind Of Blood Splash During Operation., 24. Manufacturer Should Be Iso 13485 Certified. 25. Weight Of Equipment Should Not Exceed 7 Kg., 26. Original Literature Of Equipment Should Be Submitted., 27. Firm Will Have To Supply The Suitable Stabilizer With The Equipment If It Is Essential For The Performance Of The Equipment., 28. Warranty: 2 Years , Electronic Analytical Balancespecification: 1. Electronic Balance With Transparent Case., 2. Digital Display Of Weight And Other Parameters Should Be Available. 3. Readability 1 Mg, 4. Capacity 1 Mg – 2000G, 5. Accuracy ±1 Mg 6. Stabilization Time Less Than 10 Sec, 7. Should Have Facility For Automatic Calibration With Tare Option.8. Original Literature Should Be Attached, 9. User?S List Should Be Attached With Satisfactory Report For The Last Three Years From Three Users With Contact Details.10. Firm Should Supply The Relevant Calibration Certificate For The Equipment From Nabl Accredited Lab., 11. Firm Will Have To Supply The Stabilizer If Required Along With The Equipment Free Of Cost12. Original Literature Of Equipment Should Be Submitted., 13.Firm Should Also Provide The Relevant Temperature Calibration Certificate For The Equipment From Any Nabl Accredited Lab. 14.User?S List Should Be Attached With Satisfactory Report For The Last Three Years From Three Users With Contact Details., 15. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision. 16. Manufacturer Should Be Iso 13485 Certified., 17. Warranty 2 Yrs , Non-Invasive Hemoglobulin Meter Specification: 1. Hemoglobin ° Measurement Range: 7-17 G/Dl ° Precision (1 Sd): 1 G/Dlresolution: 0.1 G/Dl 2. Data Logger With Real Time And Date3. Measured Values Automatically Stored4. Multilingual Data Interface5. Warranty - 2 Yrs , Refrigerated Centrifuge Specification: For Nucleic Acid Or Protein Lysate Preparation And Pcr Reaction 1. Maximum Speed: 20,000 Rpm Or More., 2. Speed Control Accuracy: ± 10 Rpm. 3. Maximum Rcf: 80,000 G (Approx.), 4. Maximum Capacity:20Ml 5. Tube Volume Range: 1.5 Ml – 20Ml, 6. Set Temperature: 0 To 40°C 7. Ambient Temperature 10 To 35°C, 8. Cooling System: Cfc & Hcfc Free 9. Acceleration / Deceleration Profile: 10/10 Or More, 10. Programmability: 20 Or More With Step Run Facility, 11. Power: 210-240 Vac, 50 Hz, 30 A. 12. Machine Should Have Features Like Eye-Balancing Of Samples, Delayed Start/ Stop, Dual Display Of =Run‘ & =Set‘ Parameters, Data Entry Through Key Pad & Touch Pad, Rpm/Rcf Mode, Rotor Life Management Etc.13. Machine Should Accept Rotors Of Other Makes., 14. Should Be Fda Or Ce Or Bis Approved Product, 15. Warranty - 2 Yrs , Donor Couch Specification: 1. Based On Haemodynamic Principles To Allow Blood Volumes To Redistribute With Cushioned Surface For Donor Comfort., 2. Armrest Suitable For Phlebotomy And Better Blood Flow. 3. Automatic Adjustment Of Arm- Rest To Adjust Length More Than 50 Cm And Width Of 15 Cm To Set The Arm Position To The Donor?S Comfort With Adjustment Of Height Mandatory For The Equipment.4. Material Should Be Waterproof With Rounded Borders And Easy To Clean., 5. The Length Of The Couch Should Be 200 Cm To 215 Cm To Accommodate All Type Of Donors.6. Specially Designed For Comfort Of Donor And Phlebotomist, 7. Should Be Able To Accommodate Donor Weight Capacity Of 150Kg Or More., 8. Electronic Remote Adjustment For Height And Comfortable Sitting Position. 9. Provision To Shift The Donor?S Position From “Head High – Foot Low” To “Foot High- Head Low” Or Any Position In Between For Optimal Blood Collection., 10. Only One Button To Reach Shock Position: Head Low In Case Donor Reaction., 11. 2/3 Motors With Separate Control Through Remote For Positioning Of Couch., 12. Electric Motor Should Have Microprocessor Controlled Limit Switch And Safety Circuit. 16. Trolley (Ss 304, Having Atleast Two Shelves With Adjustable Height, Suitable Size) Should Be Provided With Each Couch For Keeping Blood Collection Monitor And Other Consumables., 17. Good Quality Couch Covers (Two Sets) To Be Provided Along With The Couches Including Handles., 18. Original Literature Of Equipment Should Be Submitted. 19. User?S List Should Be Attached With Satisfactory Report For The Last There Years From Three Users With Contact Details., 20. Bidder Have To Arrange Demonstration Of The Quoted Model (If Required) 21. Electrical: The Equipment Should Be Able To Run On The Existing Electrical Provision., 22. Manufacturer Should Be Iso 13485 Certified., 23. Should Be Supply With Suitable Stabilizer With Bis/Ce Mark. Accessories:- 24. Dust Cover -1, 25. Power Cable-1, 26. Additional Arm Rest (Pair)-01 Pair., 27. Remote Control-1 No, 28. Warranty - 2 Yrs , Automated Tube Stripperspecification: Motorized Metallic Roller & One Free Roller For Smooth Tube Strippingdesigned For Easy Manual Operation With Convenienceeasy To Use Hand Rollerportable Battery Pack, Backup 1000 Cyclesautomatically Strips Tube Once The Metallic Handle Is Pressed Uniform Radial Force Across The Tube-Prevents Abrupt Manual Pressureaudio Vishual Alarm For Over Load Protectionguiding Groove For Correct Tubing Position, Fed Through Rollerssuitable For All Commercially Available Blood Bags3. Warranty - 2 Yrs , Votex Mixer Specification: 1. Adjustable To 100 To 2500Rpm 2. Continuous And Intermittent Touch Control Modes 3. Heavy Cast Metal Base And Suction Cup To Assure Stability Prevent Walking 4. 220-230 Volts Ac, 50 Hz 5. Digital Display:Led6. Capacity Of 2-3 Kg And Orbit Of 35 Mm 7. Ce/Bis Approved8. Warranty - 2 Yrs , Magnetic Strirrer And Barspecification: 1. Digital Temperature Control With Max. Temperature At 380°C.2. Digital Speed Control With Max. Speed Up To 1500Rpm.3. High Resolution Lcd Displays For Actual Temperature And Speed.4. Brushless Dc Motorandmaintenance Free.5. Ceramic Plate For Chemical Resistance And Easy Clean. 6. Aluminium Cover With Ceramic Work Plate7. Hot Warning Sign If Temperature Is Above 50°C.8. Max. Stirring Quantity Of H2o At 5L. 9. External Temperature Control Is Available As Temperature Sensor Pt1000. 10. Warranty - 2 Yrs , Autoclave Specification: 1. Capacity 80-100L, 2. Sterilization Temperature 105-135 Deg C. 3. Pressure Gauge 1 To 1.5 Kg/Sq.Cm., 4. Safety Valve Releasing Pressure200kpa.5. Automatic Adjustable Working Pressure System., 6. Double Walled.7. Inside Boiler Made Of Stainless Steel & Outside Mild Steel Finished In Cream Enamel., 8. Radial Locking System Lid.9. The Panel Is Provided With On/Off Switch, Pressure Gauge, Steam Release Valve & Indicators To Show The Working Of Mains & Pressure Control System.10. Electrically Operated On 220V A/C With Stainless Steel Basket.11. Digital Temperature Controller With Inbuilt Timer That Will Cut Off The Heaters Automatically Afterlapse Of Pre Set Time At The Pre Set Temperature. 12. Microprocessor Based Pid Controller., 13. Height:600Mm. 14. Diameter Inside: 450Mm(24”X18”), 15. Manufacturer Should Be Iso 13485 Certified., 16. Warranty - 2 Yrs , Plasma Hemoglobinometer 1. Modified Azidemethemoglobin Method 2. Warranty - 2 Yrs , Millipore Waterplant1. Warranty - 2 Yrs , Microwave Oven1. Warranty - 2 Yrs , Thermal Temperature Monitor1. Infrared Thermometer2. Rechargeable3. Warranty - 2 Yrs
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 33
Puducherry View Result →
23.
Public Administrative Department #9363422 Technical Bid
Invites bidder for 1.25 MW online solar power generation for tirth kshetra parli which includes erecting, installing and commissioning of solar panels with below details and specifications and1000 lit solar water heater for tirth kshetra parli which includes erecting, installing and commissioning of solar water heaters with below details and specifications For Non SSR Rate For M C Parli V- 1 Content WritingThe creative writing scope involves the development of narrative content through a structured yet flexible process. It begins with research—supported by books, references, and site visits—and moves through data collection, selection, and consultation with a panel of relevant authorities. The aim is to ensure cultural relevance, thematic consistency, and creative integrity. A team of experienced writers, including those with a background in show and screenplay writing, will lead the storytelling process. The primary writer must have substantial experience—preferably over 15 years— and good credentials in show writing, with a proven ability to handle complex, multimedia-driven narratives. The story evolves into script and screenplay formats, including a technical timeline version to align with visual and sound elements. If musical components are included, lyrics will be written by a professional lyricist with experience in both films and live performances. Dialogue writing, idea translation, and screenplay adaptation into other languages are also part of the scope, overseen by a dedicated language supervisor to ensure linguistic clarity and cultural sensitivity. While certain elements may adapt during the creative cycle, the process will remain focused on delivering a cohesive, original, and production-ready script. The show will be bilingual.The job consists of - Data Collection, Data Selection, Authority team, Creating Ideas, Story writing, Script Draft, Screenplay, Lyric writing, Dialogue writing, Technical timeline Screenplay, Translating ideas, Translating Screenplay, Language Supervison 2 DubbingThe audio production scope includes all processes related to voice recording, dubbing, and language adaptation as required for the project. The process begins with planning and coordination under the supervision of a Creative Director, in consultation with the script and language teams. Dubbing forms the core of the audio workflow. This includes recording of voiceovers and dialogues by both celebrity artists and junior artists, as per casting decisions. Talent coordination, scheduling, and handling of logistics fall under the purview of the Artist Management team, which ensures seamless execution across sessions. All voice recordings will be carried out at a professional audio studio, equipped to handle multichannel dubbing and real-time monitoring. Sessions are overseen by an experienced Dubbing Director, responsible for voice performance quality, tone accuracy, and delivery consistency across versions. Throughout the dubbing phase, a language supervisor ensures linguistic correctness, pronunciation alignment, and translation fidelity—particularly in multilingual productions. Supporting staff, including a designated assistant, will aid in session coordination, script handling, and communication between departments. This is a bilingual project. While the structure of the recording process is generally predefined, flexibility may be exercised based on artist availability, script revisions, or project-specific creative needs. 3 The background music The background music production covers the complete creation of an original score to support the overall mood and narrative of the show. The process is led by a Music Director, assisted by a dedicated assistant, and involves contributions from a Music Arranger and music programmers who develop the structure, orchestration, and digital elements of the composition. Live elements are performed by instrument players and chorus singers, as required by the arrangement. To enhance realism and support on-screen action, foley artists are engaged for the creation of natural, synchronized effects. All music components are recorded in a professional audio recording studio, with the final mix executed in a 7.2 surround sound mixing studio to ensure high-quality, immersive output. While the structure is generally predefined, certain creative decisions may adapt during the process to meet evolving artistic and technical needs. 4 Creating songs- The music production scope for songs includes composition, arrangement, recording, and mixing of original tracks suited to the narrative and emotional context of the project. The process is led by a Music Director, responsible for the overall musical vision, supported by an assistant who coordinates sessions and logistics.A Music Arranger refines the musical structure, harmonies, and instrumentation, while music programmers handle sequencing, layering, and digital sound elements. Instrument players contribute live performances to add depth and authenticity to the arrangement. The vocal component features celebrity singers, selected for their voice quality and public resonance, supported by chorus singers where needed for harmony or scale.All vocal and instrumental recordings are conducted in a professional audio recording studio, equipped for multi-track sessions. The final output is processed and balanced in a 7.2 surround sound mixing studio, ensuring spatial clarity and production-grade sound. Adjustments may be made during the creative process to accommodate performance styles, technical feedback, or evolving project direction. 5 Audio MixingThe final audio mixing phase ensures the integration and balance of all sound elements—dialogue, music, effects—into a polished, immersive audio output. The process is creatively led by a Creative Director, who provides the overall aesthetic and emotional direction for the final sound. A designated assistant coordinates schedules, handles version tracking, and supports communication between departments to maintain workflow efficiency. The mixing is executed in a professional 7.2 surround sound studio, equipped for spatial sound design and high-fidelity output suitable for large-format or immersive playback environments. It is a bilingual Production A Technical Supervisor oversees the process, ensuring all specifications related to format, levels, and playback compatibility are met, while also maintaining quality control across multiple output versions.Final adjustments may vary depending on the nature of the content and platform-specific requirements. 6 Scope for Bilingual -The scope includes complete audio localization of the project into a second language, covering dubbing, background music, and song music production. The process begins with dubbing, involving voice recordings by native-speaking celebrity and junior artists, directed by an experienced Dubbing Director under the creative guidance of the Creative Director. Sessions are conducted in a professional audio studio, with oversight from a Language Supervisor to ensure linguistic accuracy and cultural relevance.The background music is either adapted or recreated to suit the tonal needs of the second language version. This includes re-arrangement, possible re-recording by instrument players, and adjustments led by the Music Director with support from arrangers and programmers. Where applicable, song music production is carried out in the second language, featuring celebrity singers and chorus artists, ensuring lyrical integrity and emotional alignment. Lyrics are adapted and approved by the language and creative teams to retain the original intent while fitting the new languages phonetic and rhythmic structure. All elements—dialogue, music, and effects—are finally mixed in a 7.2 surround sound studio under the supervision of a Technical Supervisor, ensuring cohesion and broadcast-ready quality. Some creative or technical modifications may be made based on language-specific needs or audience expectations. 7 Indoor ShootingThe indoor studio shoot covers all aspects of video production carried out within a controlled studio environment, under the overall vision of the Creative Director. The shoot is planned and executed with the support of a technical supervisor, assistant, and a full production team, ensuring that both creative and logistical aspects are effectively managed.The cast includes celebrity artists and junior artists, whose schedules and coordination are handled by the artist management team. Performance delivery is supported with tools such as a teleprompter and direction provided on set. The production takes place in a professional video studio using high-grade camera equipment, with visuals led by a skilled Director of Photography (DOP). The setup includes a full lighting rig, supplemented by a generator for uninterrupted power supply. For shoots requiring virtual backgrounds or visual integration, chroma key technology is used. Supporting elements include on-location sound setup, makeup, costumes, and props, all arranged to maintain visual consistency with the creative concept. The location and studio logistics are prepared in advance, ensuring readiness for smooth execution. While most elements follow a predefined structure, flexibility is maintained for creative changes, technical adjustments, or talent-related considerations during the shoot. 8 Outdoor ShootingThe outdoor location shoot involves the execution of video production in open, uncontrolled environments, led creatively by a Creative Director and technically coordinated by a Technical Supervisor with support from an Assistant and a full Production Team. This setup ensures both the creative vision and the operational logistics are effectively managed on site.Camera equipment and on-location filming are handled by an experienced Director of Photography (DOP), supported by a custom lighting setup and reliable power supply through generators. The presence of junior artists, along with complete makeup, costumes, and props, helps bring the narrative elements to life during the shoot. To capture wide and aerial perspectives, a drone camera is operated by a trained drone operator, enabling cinematic coverage of the location. On-site sound setup ensures proper dialogue and ambient recording despite outdoor challenges. Comprehensive logistical support is included, covering crew transport, food, and accommodation, ensuring the teams comfort and efficiency during extended schedules. Outdoor management costs account for location permissions, crowd control, weather-related support, and other unforeseen field requirements. While the shoot is planned in detail, flexibility is maintained to adapt to on-site conditions, natural light changes, or last-minute creative directions. 9 Editing The editing phase involves assembling, refining, and finalizing the visual and audio content using professional software platforms such as FCP or Premiere. The process is led by a skilled Editor, working under the creative guidance of the Creative Director, and supported by an Assistant for logistical and coordination tasks. A Technical Supervisor ensures compatibility across formats and monitors workflow consistency. The edit includes detailed color correction and DI (Digital Intermediate) processing to ensure visual consistency, mood enhancement, and output readiness for multiple formats.Simultaneously, sound matching is carried out to align the audio precisely with visual elements, ensuring a seamless viewing experience. While the process follows an established structure, creative and technical adjustments may be made during post-production based on evolving requirement. 10 The concept development The concept development stage lays the foundation for the animation project by defining the core theme, narrative, or message to be communicated through the visual content. This includes interpreting the shows objective and aligning it with the desired emotional, cultural, or historical tone.A clear understanding of the events context—its purpose, audience, location, and scale—is essential at this stage. This helps shape the visual language, pacing, and symbolic elements of the animation. In parallel, the creative team gathers necessary architectural references, including blueprints, elevations, or high-resolution photographs of the projection surface—such as a building façade, monument, or custom structure. These assets are critical for mapping visual content accurately and ensuring that the animation interacts naturally with the physical form of the structure. This stage may involve creative exploration, mood boarding, and draft scripting, with room for refinement based on client input or site-specific constraints. 11 The projection surface analysisThe projection surface analysis phase focuses on the detailed study of the building or structure intended for projection. This includes analyzing its dimensions, contours, architectural features, and physical obstacles such as balconies, columns, or surface irregularities that may impact visual output.Based on this analysis, the team develops a precise 3D model or high-fidelity mock-up of the actual building or façade. This model serves as the reference framework for animation alignment, ensuring that visuals map seamlessly onto the surface and interact accurately with its physical geometry. This step is essential for delivering a high-impact, distortion-free projection experience. 12 The Storyboard & Visual ScriptingThe Storyboard & Visual Scripting phase involves planning the sequence of visuals, defining key scenes, transitions, and impactful moments that shape the overall flow of the animation. This step establishes the visual rhythm and narrative structure of the show. A detailed visual script is developed alongside the storyboard, mapping out how each visual element aligns with music, voiceover, or narration, if applicable. This ensures creative cohesion between the audio and visual components, serving as a blueprint for the animation and production teams during the execution phase.The Asset Creation phase The Asset Creation phase focuses on designing and developing all visual elements required for the animation. This includes creating characters, environments, and props using industry-standard 3D software such as Blender, Maya, or Cinema 4D, depending on project needs. In addition to modeling, the team creates or sources textures, lighting references, and visual effects that enhance the realism or stylistic tone of the animation. These assets form the visual foundation of the project and are tailored to suit the projection surface, storytelling requirements, and overall design direction.The 3D Animation & SimulationThe 3D Animation & Simulation phase involves animating visual elements in precise synchronization with the storyboard and audio, including music, narration, or sound design. This ensures that the visuals follow the intended rhythm and narrative structure. The process includes the addition of dynamic visual effects such as explosions, transformations, morphing, and architectural illusions to enhance the visual experience and create dramatic impact. To complement the content and surface geometry, camera movements and spatial transitions are simulated within the 3D environment, ensuring smooth visual flow and accurate alignment with the unique structure of the projection facade. 13 The RenderingThe Rendering phase involves generating the final animated output in high resolution (typically 4K or higher) to meet the technical requirements of the projection system. This step ensures that all visual elements are produced with maximum clarity and detail.Special attention is given to color accuracy, brightness, and contrast levels, The Audio Synchronization The Audio Synchronization phase involves the mixing of background music, voiceovers, and sound effects (SFX) into a cohesive audio track. This mix is carefully aligned with the visual timeline to ensure seamless integration.Key sound cues are timed precisely with visual events to enhance dramatic impact and emotional engagement. The synchronization process ensures that audio elements not only support but elevate the overall viewing experience.Calibration -The Projection Mapping & Calibration phase focuses on aligning the final animation with the architectural surface using specialized software such as MadMapper, Resolume Arena, or HeavyM. This step ensures that the visual content fits precisely to the buildings structure and features.On-site testing is conducted using actual projectors to fine-tune the mapping. The Final Testing The Final Testing & Show Execution phase involves conducting full-scale tests of the complete animation and audio sequence under actual or simulated show conditions, typically at night to match final lighting environments. This ensures accurate visual impact and technical performance. During testing, the team performs final adjustments to fine-tune synchronization, alignment, and timing across projection, sound, and control systems. All critical elements—transitions, cues, and effects—are reviewed for precision.Comprehensive backup systems are prepared, and the triggering mechanism for the show is tested for seamless execution and reliability, ensuring a smooth and uninterrupted live experience. 14 Concept & Theme DevelopmentThis stage involves identifying the purpose of the show—such as entertainment, branding, or cultural celebration. It includes defining the narrative structure, key visual highlights, and emotional peaks. Visual elements will be carefully aligned with music, narration, or other media components to create a cohesive and engaging experience. 15 Site Analysis & Safety PlanningSite Analysis & Safety PlanningIncludes a detailed survey of the venue to assess dimensions, audience layout, and whether the space is indoor or outdoor. Identifies laser-safe zones and ensures compliance with relevant safety standards. Plans for environmental factors such as wind, dust, reflective surfaces, and addresses power supply and equipment placement needs.Storyboard & Laser DesignInvolves creating a detailed show flow with defined cues for anim+B27ations, effects, and transitions. Includes the design of laser scenes incorporating elements such as text, logos, line art, tunnels, waveforms, and abstract visuals to match the overall narrative and theme.Audio IntegrationInvolves selecting or composing a soundtrack that enhances the laser visuals. Visuals are precisely synchronized to musical beats and cues using timeline-based software to ensure a cohesive and impactful audiovisual experience. 16 Programming the Laser ShowUtilizes specialized software (e.g., Pangolin Beyond, Laser Show Designer, LSX) to design and animate laser graphics. Involves programming scene cues with precise timing, color modulation, and optimizing vector paths to reduce flicker and ensure clean, stable laser projections.Equipment SetupInvolves integration of the control system using a laptop, DMX interface, or timecode-based triggering setup to ensure reliable playback and synchronization of laser and show elements.Show ExecutionInvolves synchronizing the laser show with other elements such as music, lighting, and pyrotechnics. Cues are triggered manually or through automated systems using timecode or MIDI. Real-time monitoring is performed to ensure system performance and maintain audience safety. 17 Objective & Concept DevelopmentDefines the purpose of the lighting design—whether for concerts, architectural highlights, theatrical performances, or event ambiance. Focuses on understanding the emotional tone, thematic direction, and desired audience impact. A creative lighting concept is developed to support the narrative, brand identity, or spatial transformation goals.Venue Analysis & Technical SurveyInvolves assessing the venues dimensions, architectural features, and ambient lighting conditions. Identifies available power sources, rigging points, and spatial limitations such as stage size and ceiling height. A 3D model or detailed layout is created or requested to aid in accurate previsualization and planning.Mood Board & Visual ReferencesCurates visual references for color schemes, lighting styles, fixture types, and integration with stage or set design. A mood board is developed to reflect the artistic direction and align with the client’s brief and creative vision.Lighting Plot & Fixture PlanningInvolves selecting suitable light fixtures such as washes, spots, beams, strobes, LED bars, and moving heads. Plans fixture positions and focus angles on a detailed lighting plot. Assigns control channels, fixture groups, and zoning to ensure efficient programming and operation. 18 Programming & Cue DesignUtilizes professional lighting control software (e.g., GrandMA, Chamsys, Avolites) to program show cues. Lighting sequences are synchronized with music, movement, or stage actions. Includes design of layered transitions such as dimming, color changes, fades, strobes, and dynamic fixture movements.Previsualization & RenderingSimulates the lighting design in 3D environments using tools such as Capture, WYSIWYG, or Depence². Provides rendered images or video previews to the client and production team for review, feedback, and approval prior to on-site setup.On-site Setup & RiggingInvolves coordination with the technical crew to install lighting fixtures, cabling, and rigging infrastructure. Includes focusing lights and adjusting beam angles, sizes, and positions. All units are tested for power, DMX signal integrity, and proper alignment.Rehearsals & Final ProgrammingConducts full run-throughs with live sound, performers, or projected content to validate timing and coordination. Adjusts cue timings, fade curves, and brightness levels based on actual venue conditions. Finalizes and programs the cue stack for show triggering via manual control, timecode, or live operation. 19 Show Planning & Cue BreakdownDefines all technical and creative elements involved in the show, including lighting, video projection, lasers, sound, pyrotechnics, and moving set pieces. Breaks the show into cue points based on timeline, music, or script structure. Timeline & Control System SelectionDetermines the central control method for the show—timecode-based, cue-stack driven, or a hybrid of manual and automated triggers. Selects appropriate software and hardware solutions (e.g., QLab, Timecode Buddy, Watchout, Medialon, Disguise, TouchDesigner, Hippotizer, MADRIX, Reaper). Defines communication protocols such as MIDI, DMX, OSC, TCP/IP, or Art-Net for seamless integration between devices.System Integration & Communication SetupEnsures all show systems—including lighting, video, audio, and mechanical elements—are networked and properly addressable. Sets up protocol routing, such as MIDI triggers for video playback or SMPTE timecode for synchronizing lighting and audio cues. Configures master/slave relationships to establish a reliable sync hierarchy, typically with audio as the master clock. 20 Programming Cue SequencesDevelops a detailed cue list within the control software, assigning precise timings and smooth transitions for each element. Triggers are programmed to execute specific actionsPrevisualization & TestingUses specialized software (e.g., Disguise for video, Capture for lighting, TouchDesigner for interactive elements) to s+B48imulate the full cue stack in a virtual environment. Enables fine-tuning of transitions, timing, and synchronization across systems before on-site setup, helping to identify and resolve potential issues in advance.Rehearsal & On-Site CalibrationConducts full rehearsals using actual show hardware including lighting rigs, projectors, audio systems, and stage mechanics. Fine-tunes cue timings, fade curves, and mechanical movements to match music or video beats. Tests all failsafes, aligns system triggers, and ensures timecode sources are synced with acceptable playback latency across all systems. 21 Digital signal processor - 12 x 8 Networked Digital Signal Processor with 12 inputs and 8 outputs or more; 12 ormore Control Inputs and 6 or more Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: <0.01% 20Hz to 20KHz; Crosstalk: <-75dB orbetter; Open architecture software configurable; logic processing power; 2 digital audio bus RJ45 Port; 1Ethernet RJ45 port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc.Approved Make: BSS / bi-amp / Symetrix 22 Wall Mount Controller - 8 Buttons Ethernet Controller and Volume Control, Should be Compatible with supplied DSP, Should support PoE (Power Over Ethernet), 8 Programmable Buttons (Multicolored), Capable to trigger any DSP logic, Multicolored 2 Programmable 64x128 Pixel LCDs, Sleep Function, Security: Remote Lock/Unlock and Local Unlock via PIN Entry, Should have knob and capable to control 8 zones separate.Approved Make: BSS / bi-amp / Symetrix 23 Wall mount arrayable speaker.High Power 3-Way Loudspeaker with 15 LF; Frequency Response:(±3 dB): 45 Hz – 18 kHz, Frequency Range (-10dB):38Hz – 20KHz; Coverage Pattern: 90° x 50°, rotatable waveguide, Crossover Modes: Tri-amp/Bi-amp switchable, Transducer Power Rating :LF 4000 W peak , MF 1400 W peak ,HF 400 W peak, LF Driver : 15”; MF Driver : 8” ; HF Driver : 1.5”; Sensitivity LF : 97dB; Sensitivity MF: 108dB; Sensitivity HF: 115dB;Maximum SPL: LF:133 dB peak , MF/HF: 139 dB peak, ; Nominal Impedance: 8 ohms, Grille: Powder coated 14 gauge perforated steel, Enclosure: Trapezoidal with 15 degree side angles.Approved Make: JBL / L-acoustic / d&b audiotechnik 24 Weathrised SpeakerHigh Power 3-Way Loudspeaker with 15 LF; Frequency Response:(±3 dB): 45 Hz – 18 kHz, Frequency Range (-10dB):38Hz – 20KHz; Coverage Pattern: 90° x 50°, rotatable waveguide, Crossover Modes: Tri-amp/Bi-amp switchable, Transducer Power Rating :LF 4000 W peak , MF 1400 W peak ,HF 400 W peak, LF Driver : 15”; MF Driver : 8” ; HF Driver : 1.5”; Sensitivity LF : 97dB; Sensitivity MF: 108dB; Sensitivity HF: 115dB;Maximum SPL: LF:133 dB peak , MF/HF: 139 dB peak, ; Nominal Impedance: 8 ohms, Grille: Powder coated 14 gauge perforated steel, Enclosure: Trapezoidal with 15 degree side angles.Approved Make: JBL / L-acoustic / d&b audiotechnik 25 Subwooferhighpower install grade Dual 18 low frequency loudspeaker systemwith extended frequency range with mounting points for OEM hardware/ bracket. Frequency response: 20Hz to 1KHz (-10 dB) or better, Power rating: 2400W continuous or better; Sensitivity: 99dB or better; Maximum SPL: 135dB or better; Nominal Impedance: 4ohm in parallel and 2X8 ohm in driver mode; LF Driver 18 or better; LFdriver with 4 voice coil.Approved Make: JBL / L-acoustic / d&b audiotechnik 26 Digital Power AmplifierFour channel Digital Network Based Power Amplifier with Power output 4 x 2400W @ 4 Ohms / 8 Ohms; should support 70Vrms and 100Vrms output on all output channels; THD 0.35% or better; Should support Cooling Continuously variable speed forced air; Voltage Gain 34dB or more; Digital bus compatibility up to 8 or more audio channel; bridgeable channels - even in 100Vrms mode for 200Vrms Output; 2digital audio bus RJ45 port; 1 Ethernet R 45 port for monitoring and configuration;Should have DSP features incl. Limiters , Input/output EQ ,Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20 Hz to 100 Hz) : >5000 or more; etc.Approved make: Crown / RAM Audio / Labgrupen 27 Digital Power AmplifierMultichannel Digital Network Based Power Amplifier with Power output 4 x 1250W or better @ 4 Ohms / 8 Ohms; Should support 70Vrms and 100Vrms output on all output channels; THD 0.35% orbetter; Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital bus compatibility up to 8 or more audio channel; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20Hz to 100Hz) : >1500 ormore; etc.Approved make: Crown / RAM Audio / Labgrupen 28 Digital Power AmplifierMultichannel Digital Network Based Power Amplifier with Power output 4 x 600W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all four channels; Frequency Response: ±0.25dB or better; Total Harmonic Distortion: 0.35% or better; Voltage Gain: 34dB or better; Damping Factor(20Hz to100Hz): >1000 or better; Signal to Noise Ratio: >108dB or better; Cooling: Continuously variable speed forced air, front to back airflow; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring.Approved make: Crown / RAM Audio / Labgrupen 29 Digital Power AmplifierMultichannel Digital Network Based Power Amplifier with Power output 8 x 300W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all Eight channels; THD 0.35% or better; Damping Factor (20 Hz to 100 Hz): >1000 or better; Frequency Response: ±0.25dB or better; Signal to Noise Ratio: >108dB or better;Cooling: Continuously variable speed forced air, front to back airflow; Voltage Gain: 34dB or better; Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration, Should have Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring.Approved make: Crown / RAM Audio / Labgrupen 30 Stage Monitors 1 x 12 LF; 2-Way Stage Monitor Speaker System; Power Rating 300W at 8 Ohms; etc.Approved Make: JBL / L-acoustic / d&b audiotechnik 31 2.5 sq mm multi stranded speaker cable 32 1.5 sq mm copper multi strandedcable 33 2 core shielded 23/36 cable 34 XLR connector 35 Speak on male and female connector 36 Jack Pins 37 RC Pins 38 EP pins 39 18U audio RackBrand - ‎RIVECO / Manufacturer - ‎RIVECO / Model - ‎OF5518 / Model Name - ‎OF / Product Dimensions ‎55.12 x 50.04 x 90.17 cm; 12.25 kg / Item model number ‎OF5518 / Compatible Devices - ‎Server / Material- ‎Alloy Steel / Manufacturer - ‎RIVECO Item Weight- ‎12 kg 200 g 40 Analog Mixer – 10-channel mixing console with 4 mono mic/line inputs featuring D-PRE Class-A preamps, +48V phantom power, one-knob compressors, 3-band EQ, high-pass filters, and 3 stereo line inputs; integrated SPX digital multi-effects processor with 24 presets; built-in 24-bit/192kHz USB audio interface (2-in/2-out); balanced XLR and TRS main outputs, monitor out, FX send, and headphone output; rugged metal chassis (244 x 71 x 294 mm, approx. 2.1 kg); includes external PA-10 power supply. Suitable for professional live sound and studio recording applications.Approved Make - Yamaha, Mackie, Beheringer 41 Microphone (with cable) – Dynamic cardioid vocal microphone designed for professional live vocals and studio use, featuring a tailored frequency response of 50 Hz to 15 kHz for clear vocals and speech, uniform cardioid pickup pattern for excellent off-axis rejection, pneumatic shock mount system to reduce handling noise, built-in spherical wind and pop filter, rugged steel mesh grille, and durable metal construction; output impedance of 150 ohms, sensitivity of –54.5 dBV/Pa (1.85 mV), and XLR 3-pin connector.reliable, clarity, and stage durability.Approved Make - Shure, Sennheiser 42 Microphone Stand – Heavy-duty, adjustable-height microphone stand with tripod base or round base options, suitable for studio and stage use; features height adjustment clutch, extendable boom arm (where applicable), and standard 5/8 mic thread mount. Recommended brands: K&M (König & Meyer), Hercules, QuikLok, Samson, and Maplin. Ensure compatibility with dynamic and condenser microphones for versatile application 43 Installation, Testing & Commissioning of Sound System – Involves installation of speakers, mixers, amplifiers, processors, microphones, and cabling as per design; proper mounting, wiring, and termination with safety and signal integrity checks; system calibration including level setting, equalization, and time alignment; verification of all input/output signal paths; integration with AV or control systems if required; conducting performance tests to ensure clarity and coverage; final tuning, user orientation, and handover of a fully functional audio system. 44 Image - brightness (lumens) - • 17,800 ISO /15,000 ANSI • 23,750 ISO /20,000 ANSI color wheel• 4 segment – 3X speedDisplay technology - type - 1 x 0.8 HEP DMDresolution - WUXGA • 1920 x 1200 (2,304,000 pixels) (16:10)Illumination - type - High efficiency blue laser phosphor / performance, 20,000 hours to 50% brightness at full power mode, 50,000 hours to 50% brightness at ECO1 modeSignal Inputs - standard - HDMI 2.0b x 2 (HDCP 1.4/2.2) • 3G-SDI x 1 (BNC) -Display Port x 1(1.2a) • USB 2.0 x 1 (Type A) • HDBaseT - 1.0 (RJ45) x 1signals - Horizontal and vertical scaling while maintaining aspect ratio (all inputs)3D-Active shuttered - HDMI 1.4, HDBaseT – frame packing, top/bottom, side-by-side at 1080p at 60Hz frame sequential WUXGA(RB) up to 120 Hz. - 3D sync in (BNC) – for genlocking 45 projectors - 3D sync out (BNC) – for genlocking projectors, or controlling emitter or polarizerpixel clock - 600MHzscan rates - Horizontal: 15.375 kHz ~ 135.0 kHz ; Vertical: 23.98 Hz ~ 120 Hz -Signal Outputs monitor out (loop-through) - 3G-SDI x 1 (BNC) • HDMI x 1 (HDMI out)Control and networking -HDBaseT (RJ45 x 1) /RJ45 x 1 (Ethernet Control over wired network connection) / RS232 x 1 / Remote in: 3.5mm stereo female (provides serial communications and power) / DC JACK 12 VDC, 200 mA maxTAA-compliant - Yes 46 Lenses - mount type - Boresight adjustable - Motorized horizontal and vertical lens offset (memory available) / Motorized zoom and focus adjustment (memory available for full ILS lenses)lens options - 0.46:1 UST lens - • 1.8-2.4:1 zoom lens • 2.4-4.8:1 zoom lens • 4.8-8.64:1 zoom lens • 8.64-12.96 zoom lensAccessories - standard - IR remote with wired remote jack (wire not included) • AC line cord for projector • Product Safety Guide 47 Installation testing and comminssioning -Includes unloading, positioning, and secure rigging or ceiling/truss mounting of high-lumen projectors as per projection plan; connection of power supply, signal inputs (HDMI, SDI, DVI, DisplayPort, or HDBaseT), and control interfaces (LAN, RS232, or remote protocols); alignment of projectors with screen surfaces or projection areas using lens shift, zoom, and keystone adjustments; implementation of edge blending, warping, and soft/hard masking where multiple projectors are used; calibration for brightness, color uniformity, and geometry using test patterns or software tools; full testing for input responsiveness, synchronization with lighting/audio cues, and heat management; integration with media servers, automation or timecode systems; final run-throughs and commissioning for stable operation and visual consistency during the show. 48 The PAR 180 RGBW IP is a powerhouse in the realm of LED lighting. Boasting 54X3W RGBW LEDs, it offers a vibrant array of colors with precision. Constructed with robust die-cast aluminum housing and an efficient heat sink, it ensures durability and minimal power consumption. Its slim profile accommodates five lens angle options, providing flexibility for various lighting applications. Whether for professional setups or outdoor events, this PAR delivers reliability and versatility in every illumination.Voltage - AC115-230V, 50/60 Hz / Power120W / Lamp source 54X3W RGBW 6000K Life / Color temperature / time 80000h / Lens angle15/25/20/45/60 ° / Channel 4/8 CH / Control mode DMX512, master-slave, auto, sound control / IP Rating IP65 / Net Weight 5.5 KG / Gross Weight 12.6 KG (Cardboard packing 2in1) / Package 60 X 30 X 33 CM (Cardboard packing 2in1) 49 Moving Heads - Rainbow 300:- Model No. :-11001001 Lamp Type :- Philips MSD 250W / Osram HRI 251W ,Average Life :- 1500 hours ,Color Temperature :- 7800K / 7890K ,Reflector :- Lamp and reflector combined in one unit ,Lens :- High-precision optical lens ,Beam Angle :- 0°–4° ,Color Wheel :- 13 Color Filters + Open ,Effects :- Rainbow effect can be created ,Gobos :- 12 Fixed Gobos + 4 Glass Gobos + Open ,Effects :- Shake effect,Frost Effect :-Independent frost soft effect,Dimming :- Mechanical linear 0–100% dimming ,Strobe Effects :-Fast strobe, pulse / asynchronous / synchronous / random speed ,Prism Wheels :- 3 Total: • 1 x 8+8+8 Honeycomb Prism (Self-rotating) ,• 1 x 8 Circular Prism (Self-rotating) ,• 1 x 8+16 Facet Circular Prism ,Optional Prism :-6 Facet Linear Prism,Total Prism Effects :- 7 ,Pan Range :- 540°,Tilt Range :-270° ,Reset System :-Electro-optic auto-reset system ,Control Channels :- 16CH / 20CH ,Control Modes :-DMX512, RDM (Optional), Auto Run, Sound ,Addressing Option :-Type-C Socket (Powerbank compatible) ,Menu Display :-LCD with 16 million pixels, 180° rotatable,Fan Control :- Intelligent fan control ,Sensor Detection :- Electronic sensor detection ,DMX Monitoring :- DMX control monitor,Motor Drive :- X/Y Two-phase motor drive,LCD Features :- Parameter query available 50 Moving Heads - Rainbow 600 (Wall washer) ,Model No. :-11001021 ,Lamp Type ,OSRAM HRI 420W / Philips MSD 420W ,Average Life :- 2500 hours ,Color Temperature :- 7600K / 8000K .Reflector :- Lamp and reflector combined in one unit , Lens :- High precision optical lens ,Beam Angle :-2.8° ,Color Wheel :-14 Color Filters + Open,Effects :- Rainbow color effect ,Gobos:- 12 Fixed Gobos + 4 Glass Gobos + Open ,Effects :-Shake effect,Frost Effect :-Independent frost soft effect ,Dimming:- Mechanical linear 0–100% dimming ,Strobe Effects :-Fast strobe, pulse / asynchronous / synchronous / random speed ,Prism Wheels :-2 Total: :-• 1 x 8+8+8 Honeycomb Prism (Self-rotating) ,• 1 x 8 Facet Circular Prism (Self-rotating) ,Total Prism Effects:- 3,Pan Range :- 540° ,Tilt Range :- 270° ,Reset System :- Electro-optic auto-reset system,Control Channels :- 16CH / 20CH ,Control Modes :-DMX512, RDM (Optional), Auto Run, Sound ,Addressing Option :- Type-C Socket (Powerbank compatible),Menu Display :-LCD with 16 million pixels, 180° rotatable,Voltage :- AC100-240V 50/60Hz,Ballast :- Electronic ballast ,Power Consumption :- 600W,Clamp Type:-Inbuilt folding clamp ,Product Dimensions :-38 x 32 x 66 CM,Net Weight :-20KG,Flight Case Packaging (2 in 1):-78.5 x 46 x 89.5 CM ,Gross Weight :-60KG 51 DMX Spliter 8C :- Take control of your lighting rig with the DMX SPLITTER 8CH 2 IN1. Amplify your DMX signal to four independent outputs, providing greater fixture control and scalability for large-scale events and intricate lighting designs. With impeccable signal integrity and flexible configurations, this splitter is the perfect choice for demanding outdoor environments, touring artists, and rental companies seeking reliable performance and stability.Power input :- AC120V-240V 50Hz/60Hz ,Consumption :-20W ,Net Weight :- 2.4 KG,Gross Weight :- 14 KG ,Cardboard packing :- (5in1),Package :- 51X24X48 CM 52 Haze :-DFZ-2100 is a top of the range water-based haze machine designed for the professional market. It has strengthened its performance than its predecessor, comes built-in flight case and can be stacked one on another. DFZ-2100 haze machine features a unique heating system which enables to produce continuous even haze, free from clogging, reduce maintenance and extend product life. Operating at low noise levels makes it an ideal choice for noise-sensitive environments, including theaters, stages, studios and high-end bars.,Power :-1200W ,Voltage:- AC220V-240V/50-60Hz .Warm-up time :- Appr. 2 Min,Fuel consumption :-83 Min/L ,Tank capacity:- :-5 ltr. ,Max output volume:- 12000 cuft / Min,DMX Channel :-2,DISPLAY :-LCD-2,Net Weight :- 14 KG , Gross Weight ,16 KG ,P Dimensions :- 51×39×26.5 CM ,C Dimensions:- 59×47.5×33.5 CM 53 Cables:- 2.5 sq mm cable 54 Connectors -Includes supply and installation of professional-grade connectors for stage lighting such as XLR (3-pin/5-pin) for DMX signal, PowerCON and True1 for secure power connections, and EtherCON for network-based lighting protocols like Art-Net or sACN; all connectors to be heavy-duty, locking type, and suitable for touring or fixed installations, ensuring reliable signal transmission, power safety, and system durability; recommended brands include Neutrik, Amphenol, and Seetronic. 55 Poweboard -Custom-designed power distribution board for stage lighting, equipped with industrial-grade MCBs, RCBOs, power indicators, and socket outlets (16A/32A/63A as required); includes multiple protected outputs for connecting lighting fixtures and dimmers, with proper earthing, load balancing, and surge protection; housed in a rugged enclosure suitable for indoor/outdoor use; ensures safe and reliable power supply for all stage lighting equipment; recommended components from brands like Legrand, Schneider Electric, or L&T. 56 Installation - Involves mounting and rigging of lighting fixtures (LEDs, movers, PARs, etc.) on trusses or grids, routing and termination of power and DMX/control cables, addressing and patching of fixtures, integration with lighting console via DMX or Art-Net, testing for power, control signal, and fixture functionality; includes alignment, focusing, and basic programming as per show design; all work to comply with safety standards and rigging best practices. 57 lamp power:- 40W,Laser power :-Red:10000mw Green:15000mw Blue:16000mw ,Power consumption :-760W,Wavelength :-Red:638mw Green:525mwBlue:450mw,Laser source :- Diode(NICHIA) ,Colors :- RGB full color ,External Modulation :-100K Analog, TTL,DMX Channel :- 19CH/32CH,Scanner system :- 50kpps☑,Laser source :- Diode(NICHIA),Colors :-RGB full color, External Modulation :- 100K Analog☑ TTL☑,DMX Channel :-19CH/32CH,Scanner system :- 50kpps 58 Timecode reader for Laser Show – Device used to read and decode SMPTE/LTC timecode signals for precise synchronization of laser projections with audio, lighting, and video cues; ensures frame-accurate playback and seamless integration with laser control software; supports industry-standard timecode formats, offers stable input detection, and is compatible with show controllers and timeline-based systems. Recommended brands -Pangolin, LaserAnimation Sollinger, and Showtacle 59 License Key for Laser Show Software – Official software authorization key required to unlock full features of professional laser show control applications such as Pangolin QuickShow, BEYOND, or Showtacle Moncha.NET; enables access to advanced timeline programming, multi-laser control, DMX/Art-Net integration, 3D animation tools, and real-time synchronization with audio, video, and lighting systems; delivered as a hardware dongle or digital activation key. Essential for legal use and operation in professional multimedia and laser show productions. 60 InstallationIncludes mounting and alignment of laser projectors at designated locations, secure rigging with safety measures, routing and termination of power, signal, and control cables, integration with control systems (DMX/Art-Net/ILDA), installation of safety interlocks and emergency stop switches, basic lens and beam path alignment, and ensuring compliance with safety standards; system tested for alignment, coverage, and synchronization with multimedia content before handover. 61 Server :- Operating System -Windows 10 or Windows 11 (64-bit), macOS 10.15 (Catalina) or later,Processor- Recommended: Intel Core i7 or AMD Ryzen 7, Minimum: Intel Core i5 or AMD Ryzen 5 :- Recommended: Intel Core i7 or AMD Ryzen 7, Minimum: Intel Core i5 or AMD Ryzen 5,Recommended: 16 GB or more, Minimum: 8 GB.Graphics Card :- Recommended: NVIDIA GeForce RTX 4060 with 6 GB VRAM, Minimum: NVIDIA GeForce GTX 960 with 2 GB VRAM,Storage:- Recommended: SSD with 10 GB free, Minimum: 5 GB free space ,Video Inputs :-HDMI x 2 (HDCP 2.2 compliant), DisplayPort x 1 (version 1.2), DVI-D x 1 (digital only), USB x 1 (Type A),Video Outputs :- HDMI x 1, 3G-SDI x 1 (BNC),Optional Video Inputs :- HDBaseT (RJ45 x 1), Terra SDVoE, 3G-SDI x 1 IN (BNC), 3G-SDI x 1 OUT (BNC), WiFi Dongle,Audio Outputs :- Stereo output via 3.5mm jack or HDMI,Networking:- Ethernet (10/100/1000 Mbps), WiFi (optional) ,Resolution Support :- Max: 4096 x 2160 @ 60Hz, Min: 480i @ 60Hz,Frame Rate Support :- Horizontal: 15-91 kHz, Vertical: 24-120 Hz,Pixel Clock :- Max: 594 Mpix/s (supports high resolutions and refresh rates),3D and HFR Support :- 3D Formats: Frame packed, top/bottom, side-by-side (up to 120Hz), Optional Input: Up to 1920 x 1080 @ 120Hz,Control Interfaces :- RS-232, MIDI/OSC, Web Interface,Networking and Remote Control :- Ethernet (10/100/1000 Mbps), WiFi (optional) ,Warping and Blending :- Built-in warping and blending, compatible with external video processors and controllers,Standard Accessories :- Power cable, manuals,Optional Accessories :- External control interfaces, additional storage ,Operating Voltage :- 100-240 VAC @ 50/60Hz ,Power Consumption :- Max: ~250-500W (varies by configuration) Power Management :-Various power-saving modes available, Operating Temperature :- 50-95°F (10-35°C),Operating Humidity :- 10-80% non-condensing, Warranty :-1-3 years parts and labor (varies by manufacturer and region), extended support available :-24/7 support available from manufacturer or authorized dealers 62 Laptop :- Hard Disk Size 512 GB, CPU Model Intel Core i7,Processor: 13th Generation Intel Core i7 1255U Up To 4.7GHz ,Operating System: Pre-loaded Windows 11 | ,Laptop, Power Adapter and User Guide,Display: 38cm 16:10 FHD (1920x1080), 60Hz 45%NTSC IPS-Level,Memory & Storage: 8GBx2 DDR5 Onboard Dual Channel RAM | Storage: 512GB NVMe PCIe Gen3x4 SSD,Intel Iris Xe Graphics | 802.11 ax Wi-Fi 6 + Bluetooth v5.2 63 DeskTop - High-performance desktop workstation comprising AMD Ryzen 9 7900 processor, compatible ATX motherboard with PCIe 5.0 support, 32GB DDR5 RAM (2x16GB, 6000MHz), 1TB NVMe Gen4 SSD (Samsung 980 Pro or equivalent), NVIDIA RTX 4060 Ti 8GB GPU, 750W 80+ Gold certified power supply, mid-tower cabinet with efficient airflow and acoustic insulation, 240mm liquid CPU cooler, 27” QHD IPS monitor with 99% sRGB coverage (Dell UltraSharp or equivalent), professional-grade audio interface (Focusrite Scarlett 2i2 or equivalent), and Windows 11 Pro OS. All components to be compatible for seamless performance in professional audio-video editing, mixing, 3D rendering, and multimedia production workflows. 64 Automation console - watchout :- Multi-display and multi-resolution support , · Timeline-based show creation,· Real-time show control via TCP/IP,· Live video input (NDI®, SDI, HDMI, capture cards),· Audio playback and synchronization,· External control via MIDI, Art-Net, DMX, and other protocols,· Support for image sequences (e.g., PNG, TIFF), videos (H.264, HAP, ProRes, etc.),· Automation and scripting support,· Support for 4K/8K+ playback (hardware dependent),· Geometry correction and soft-edge blending,· Output synchronization across multiple display servers 65 External Hard disks :- Brand - ‎LaCie / Manufacturer - ‎Lacie, Seagate, Series - ‎D2 Professional / Form Factor - ‎3.5-inch / Item model number - ‎STHA8000800 / Hard Drive Size - ‎8 TB / Hard Disk Description - ‎Mechanical Hard Disk / Hard Drive Interface -‎USB 3.0 / Hard Disk Rotational Speed - ‎7200 RPM/ Hardware Platform - ‎PC, Mac / Operating System‎mac os / Included Components - ‎LaCie® d2 Professional; USB-C (USB 3.1 10 Gb/s) cable; External power supply; Quick Installation Guide; Rescue Data Recovery Services4 / Manufacturer - ‎Lacie 66 Weatherproof canopies for projectors and speakers -Supply, fabrication, and installation of custom-designed weatherproof canopies for outdoor projectors and speakers, constructed using powder-coated mild steel, stainless steel, or aluminum with UV-resistant polycarbonate or acrylic panels (for projector visibility), designed to protect equipment from rain, sunlight, dust, and wind. Each canopy shall include a sloped roof for water drainage, IP55 or higher ingress protection rating, proper ventilation to prevent overheating, lockable access panels for maintenance, vibration-dampening mounts (for speaker housings), and suitable mounting provisions (wall, ceiling, or pole). All materials must be anti-corrosive and suitable for long-term outdoor use. Installation shall follow manufacturer guidelines and site conditions. Approved Makes / Equivalent: Tempest, Chief (Legrand), Peerless-AV, SunBriteTV, Vanco, Middle Atlantic, or equivalent.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
24.
Educational and Research Institute #9335364 Technical Bid
Supply Installation And Commissioning Of Lab Equipment For Electronic Engg Dept , Amplitude Modulationdemodulation Kit Carrier -40Khz, Amplitude 2V Modulating Signal- 20Hz To 20Khz ,Amplitude0 To 3V With On Board Supply0-5V , Frequency Modulation & Demodulation Trainer Kit Fm Modulation Using Vco Modulator Reactance Modulator & Varactor Modulator Transmitter Frequency Up To 455Khz Fm Demodulator Using Detuned Resonant Detector, Quadrature Detector, Fooster Seeley Detector, Ratio Detector &Pll Detector (Modulating Signal-2Khz To 4 Khz ,Amplitude 3V)Fm , Ssb Sc Ammodulation And Demodulation Trainer Kit Mod-14 On Board Modulation & Demodulation Circuit Wide Frequency Response Upto 100Mhz , Dsb Sc Modulation And Demodulation Trainer Kit Receiver Ckt Consist Of Rf Amplifier, Mixer, Local Oscillator, Bfo,If Amplifier-1, If Amplifier-2 Diode Detector For Dsb & Product Detector For Ssbfrequency Range 300 Hz To 3.4 Khz , Superheterodyne Fm Radio Receiver Trainer Kit Frequency Range Mw-520-1620Khz,Intermediate Frequency:455Khz,Input Circuits : Rf V Amplifier, Mixer, Local Oscillator, If Amplifier, Tuning With Variable Capacitor, Detector With Agc Control. , Load Measurement Using Strain Gauge Kit Transducer: Resistive Load Cell Load In Weights Can Be Measured Upto 3 Kgs Primary Excitation Voltage Of 12V Dc Measurement Option: Output Available On 2Mm Banana Sockets For Monitoring Onboard Features: Provided With Excitation Voltage Interconnections: 1.Test Points Are Provided To Analyse Signals At Various Points 2.In-Built Power Supply Of+5V/1.5A, ± 12V , Speed Measurement Kit Transducer/ Sensor- Magnetic Pickup Using Inductive Proximity Switch Transducer Measurement Option: 1.On-Board Digital Panel Meter Provided 2. Output Available On 2Mm Banana Sockets For Monitoring Onboard Features:Onboard Microcontroller With Seven Segment Display For Rpm Calculation Interconnections: 1. All Interconnections Are Made Using 2Mm Banana Patch Cords 2.In-Built Power Supply Of+5V/1.5A, ± 12V , Displacement Measurement Using Lvdt Trainer Transducer:1) Lvdt Tranducer With Transparent Enclosure 2) Displacement Of ± 5Mm 3) Primary Excitation Voltage Of Sine Wave 1V P-P Measurement Option: 1) Onboard Digital Panel Meter Provided 2) Output Available On 2Mm Banana Sockets For Monitoring 3) Screw Gauge For Reference Displacement Reading Onboard Features: Provided With Excitation Voltage Interconnections: 1.All Interconnections Are Made Using 2Mm Banana Patch Cords2.Test Points Are Provided To Analyse Signals At Various Points 3. Set Of 2Mm Patch Cords For Interconnections , Waterlevel Indicator Kit Transducer: 1) Capacitive Level Transducer 2) Level Measurement Upto 150Mm Is Possible Measurement Option: 1) Onboard Digital Panel Meter Provided 2) Output Available On 2Mm Banana Sockets For Monitoring 3) Screw Gauge For Level Measurement Onboard Features: 1Ft Scale Is Provided For Level Measurement Interconnections: 1.All Interconnections Are Made Using 2Mm Banana Patch Cords2. Set Of 2Mm Patch Cords For Interconnections , Temperature Measurement Using Thermistor Kit Transducer/ Sensor- 1) Ad590/Thermistor Sensor Is Used 2) Temperature Measurement Upto 110 °C Measurement Option: 1.On-Board Digital Panel Meter Provided 2. Output Available On 2Mm Banana Sockets For Monitoring 3. Thermometer For Measurement Of Temperature Onboard Features: Onboard Instrumentation Amplifier Provided Interconnections: 1.All Interconnections Are Made Using 2Mm Banana Patch Cords 2. Test Points Are Provided To Analyze Signals At Various Points 3. All Ics Are Mounted On Ic Sockets 4. Set Of 2Mm Patch Cords For Interconnections , Led Colour Tv Remote Control Display Type :Led, Hd, Screen Size:20 Inch Display Resolution:1600 X 900 Contrast Ratio:Dynamic Contrast Ratio (1000:1), Brightness:300 Cd/M2 Viewing Angle:160(H) X 160(V), Refresh Rate:60 Hz Video Interface: Video Input/ Vga Input, Audio Analog Video Input, Audio Interface: Rca L & R
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Goa View Result →
25.
Banking and Finance #9079750 Technical Bid
E-Tender For Procurement Of Equipment For Manodaya, Jatni Composite Centre For Cognitive Disability ( Adults ) At Iic Jatni, Khordha District Under Siep E-Tender For Procurement Of Equipment For Manodaya, Jatni ( Composite Centre For Cognitive Disability ( Adults ) At Iic Jatni, Khordha District Under Siep , Section-I- Equipment For Therapy Unit , Treadmill- 4Hp Noiseless Ac Motor , Bolsters Of Different Sizes , Puzzle – Body Parts With Two Facial Expressions With Box, Animal, Birds, Fruits, Transports, Different Shapes , Lower Extremity Cpm , Cp Chair , Static Cycle , Reclined Cycle , Height Scale , Texture Fruit Tree , Ball Pool ( 48”X 48” ) , Perdue Peg Board- Large, Medium & Small , Exercise Mats – 6’X3’ , Exercise Frame – Rope Mess, Pip Ladder And Rock Climbing Board , Trampoline ( 48 Inch ) With Mess Covering , Quadriceps Table With Detachable Backrest , Stethoscope , Blood Pressure Apparatus , Goniometer – 180 & 360 Degree , Electronic Stopwatch , Digital Weighting Machine , Treatment Trolley , Muscle Stimulator Combo- With Current -Galvanic, Interrupted Galvanic, Faradic, Surged Faradic And Tens , Weight Cuff- 1 / 4 Kg, 1 / 2 Kg, 1 Kg, 1.5 Kg , Thera Band- Different Colours And Ranges , Thera Putty Withdifferent Colours & Ranges , Portable Shoulder Exerciser With Pronation Supination Arrangement , Grip Exerciser , Hand Gym Kit Board , Wrist Roll , Rope Pulley Handle Set , Upper Extremity Work Station , Vestibulator With Facility Of Platform Swing, Flexion Disc, Frog Swing, Lycra Swing , Bolster Swing Rectangular , Vestibular Board – 3’.6” X 2’.6” X 7 , Scooter Board , Wedges Of Different Sizes , Post Box With 25 Plates , Door Latch Board , Floor Seater , Stand In Table With Standing Metal Frame Of Size- L, M & S , Tunnel , Treatment Plinth , Wooden Blocks Of Different Heights- Set Of 6 , Peanut Ball , Staircase , Parallel Bars With Platform , Suspension Frame , Stability Disc , Ramp And Curb , Balls For Ball Pool , Ankle Exerciser , Walker With 4 Castors – Non Folding Posterior Opening , Walker Without Castors – Non Folding Posterior Opening , Circle Balance Disc , Board For Lower Extremity – Standing Exercise , Foot Placement Ladder , Graded Spring Set , Long Handle Thick Grip Spoons, Combs, Brushes , Tactile Balls For Grip , Lotca Battery Test , Minnesota Test , Tilt Table , Wobble Board , Cryo Therapy Unit , Treatment Couch , Children Medical Cycle – Corival Pediatric Ergometer Cycle , Ultrasound- 1 And 3 Mhz Frequency – Us-751 , Medicine Ball Of Size- 1 Kg, 2Kg, 4Kg , Therapy Ball Of Size-75Cm, 90Cm & 125Cm , Reverse Walker- Anterior Opening With Back Seat , Finger Ladder , Mirror- 3’ X 3’ , Nirmal Hand Apparatus , Whirlpool Bath , Hydrocollator Unit , Mini Hydrotherapy Unit , Sensory Brushes , Rocking Horse , Inclined Stand Table , Torch Light , Gait Ladder , Gaiters Of All Sizes , Elbow Crutches , Rolator Walkers , Walking Frames-Child , Section-Ii- Equipment For Audiology & Speech Therapy Unit , Single Portable Unit -Pure Tone Audiometerwith Facilities Of Free Field Audiometry & Speech Audiometry And Lithium-Ion Battery Backup , Impedance Audio-Meter With Tympanometry Mode Touch Screenand Built In Thermal Printer - Table Top Model , Oto- Acoustic Emission ( Oae ) Instrument- Dual Channel Diagnostic Audiometer With Tdh-39 Earphones And Radio Ear B71 Bone Transducer , Non-Sedated Diagnostic Bera With 2 Channel And Vemp, Abr & Ssr Facilities And Computer Accessibility Through Usb Portal , Examination Bed With Mattress And Oil Cloth To Carry Out Bera Test , Video Oto-Scope With Computer Accessibility , Acoustic Booth 15’X12’X 7’ With Inner Partition, Double Door, Magnetic Seal, Silenced Ventilation With Observation Window , Visi-Pitch With All Accessories & Dr. Speech Software , Bio Feedback System For Stammering Therapy With All Accessories / Metronome , Speech Therapy Materials ( Local Purchase ) With Mirror- 4’ X 3’ , Mattress 6’ X 6’ , Small Chairs Of Height 1’ And Back Support , Tongue Depressor , Portable Impedance Audio-Meter With Tympanometry Mode Touch Screenand Built In Thermal Printer , Noise Level Meter , Hipro-2 For Programming Of Digitalh.Aids , Trial Digital Programmable Bte / Itc Hearing Aids , Section-Iii- Equipment For Psychology & Psychotherapy Unit , A ) Intelligence Test , Vsms ( Vineland Social Maturity Scale ) , Sfb ( Seguin Form Board Test ) With Manual & Answer Sheets , Bkt ( Binet Kamat Intelligence Test ) , Misic ( Malin’S Indian Scale For Intelligence ) , Wais ( Wechler’S Adult Intelligence Scale ) , Cpm ( Coloured Progressive Matrix ) , Bhatia Intelligence Test , Bharatraj Developmental Screening Test , Denver’S Intelligence Test , Standard Progressive Matrix , B ) Personality & Psycho-Diagnostic , Rorschach Ink Blot Test , Thematic Apperception Test ( Tat ) , Children Apperception Test ( Cat-Animal Cards ) , 16 Personality Factor Inventory , Mmpi , C ) Cognitive Function Test , Wcst ( Wiscomin’S Card Sorting Test ) , Bgt ( Bender Gestast Test ) , Bvrt ( Bender Visual Retention Test ) , Stroop Test , Tmt ( Trail Making Test ) , D ) Neuro-Psychological Battery , Pgi- Bbd , Aiims Neuro Psychological Battery , E ) Behavioural Symptom Analysis , Child Behaviour Check List ( Cbcl ) , Bayley’S Developmental Assessment ( Dst ) , F ) Scales , Bdi , Hamilton Depression Rating Scale ( Ham-D ) , Brief Psychiatric Rating Scale ( Bprs ) , Adhd Cormor’S Rating Scale ( Adhd-Crs ) , Adhd Vanderbilt Rating Scale ( Adhd-Vrs ) , Asd- Cars-2 , Asd- Isaa , Asd- Inclean , Conduct Disorder Scale ( Cds ) , Suicidal Ideation Questionnaire ( Siq ) , G ) Sld , Diagnostic Test Of Learning Disability ( Dtld ) , Diagnostic Test Of Reading Disorder ( Dtrd ) , Nimhans Sld Battery , Bio Feed Back & Neuro Feed Back , Section-Iv- Play & Recreational Therapy Unit , Misc. Items For Play & Recreational Therapy Like Sand Pit, Mud Pit, Tyre Rows & Other Local And Low Cost Items For Cognitive & Sensory Development , Section-V- Skill Development & Craft Training Unit , Misc. Tools, Equipment &Items For Skill Development, Craft Training And Sheltered Workshop , Annual Comprehensive Maintenance Charges ( Please Quote The Rate Per For 5 Years ) , Section-I , Section-Ii , Section-Iii , Section-Iv , Section-V
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Odisha View Result →
26.
Public Administrative Department #9065269 Technical Bid
Upgradation Of Puttabuka Community Hall Under Karimpur-I Block Under Mplads , Laying And Jointing Pvc Pipe. Heading , Providing & Fixing 11Mm Thickness Hdmr Board With Screw On Wall With Gi Frame Work Backing With Polyfibre Wool 50Mm Thick 1000 Gsm. Fixing Fabric Gripper On Hdmr Board With 9Mm Thick Acoustic Panel Top Finish With Fire Retardant Fabric , Providing & Fixing Grid Ceiling With T24 With 15Mm Acoustic Ceiling Tiles 595 X 595Mm (Black Color) , Modification Of Doors Leading To Auditorium With Necessary Treatment , Screen Frame With 19Mm Ply Platform , Carpet Loop Pile With Kini Foam 2Mm Backing , Ceiling Lights For Auditorium , Step Lights For Auditorium , Push Back Chairs For Auditrium , Stage Speaker System (Left, Centre & Right) Three-Way Biamplified Screen Array Loudspeaker System Having Frequency Range (-10Db) 30 Hz - 20 Khz, Frequency Response (±3 Db) 40 Hz - 19 Khz, Sensitivity 104Db @ 2.83V, Maximum Spl (1M) 125 Db @ 1M (3.3 Ft), 131 Db Peak, System Input Power Rating 3732: Lf: 500 W, M/Hf: 150 W 3732-T: Hf: 85 W, Horizontal Coverage Angle 90° (-6 Db), Vertical Coverage Angle 20° Up, 30° Down (-6 Db), Directivity Factor (Q) 10.0, Directivity Index (Di) 10 Db, Crossover Frequencies 3732: 350 Hz 3732-T: 1.2 Khz, Dimensions (H X W X D) 1937 X 762 X 450 Mm 76.3 X 30 X 17.75 In), Nominal Impedance 4O, Power Handling (2Hr Aes Rating) 600W Make: Jbl , Subwoofers: Dual 460 Mm (18 In.)Subwoofer System Having Frequency Range (±3 Db) 22 Hz - 100 Hz, Frequency Range (-10Db) 20 Hz - 500 Hz, Rated Impedance 4 Ohms, Minimum Impedance 3.2 Ohms, Power Handling Capability -, Continuous Pink Noise 1200 Watts, Continuous Program 2400 Watts, Peak Power 4800 Watts, Output Capability -, Axial Sensitivity 50 Hz To 500 Hz; 101 Db, 1W @ 1M 40 Hz To 100 Hz; 100 Db, 1W @ 1M, Net Weight (Each) 216 Lbs (98 Kg), Dimensions (H X W X D) 762 Mm X 1219 Mm X 610 Mm 30 In X 48 In X 24 In Power Handling (2Hr Aes Rating) 1200 W, Sensitivity 100 Db. Maximum Spl (1M) 131 Db, Nominal Impedance 2 X 8O Make: Jbl , Surround Speakers: Compact Cinema Surroundspeaker For Digital Applications Havingfrequency Range (±3 Db) 65 Hz - 18 Khz, Frequency Range (-10Db) 50 Hz - 20 Khz, Power Rating 150 Watts Continuouspink Noise600 Watts Peak, Sensitivity 94 Db-Spl Half-Space / Wall-Mounted91 Db-Spl Free-Field, Maximum Spl (1M) 116Db, Nominal Impedance 8O, Horizontal Coverage Angle (-6Db) 100° Averaged 400 Hz To 12 Khz, Vertical Coverage Angle (-6Db) 90° Averaged 400 Hz To 12 Khz, Directivity Factor (Q) 7 Averaged 400 Hz To 12 Khz, Directivity Index (Di) 8.4 Db Averaged 400 Hz To 12 Khz, Crossover Frequency 3 Khz, High Frequency Contour Iso2969 Curve X Surround Contour, Polarity Eia (Positive Voltage To Red Terminal Gives Forward Cone Motion), Low Freq Transducer Nominal Diameter 200 Mm (8 In)38 Mm (1.5 In) Voice Coil, High Freq Transducer Nominal Diameter 25 Mm (1 In)25 Mm (1 In) Voice Coil Downward Firing Angle Nominal 20° When Mounted Flush On Back Panel, Enclosure Material Textured Black H.I.P.S. Plastic Grille Color Black, Input Connectors 5-Way Binding Posts Power Handling (2Hr Aes Rating) 150 W Make: Jbl , Amplifiers : Two-Channel, 800W Power Amplifier Having Channels 2, Sensitivity 1.4V, Rated Power Output (Per Channel) 1000W 2O, 800W 4O, 475W 8O, Signal To Noise Ratio (Below Rated 1 Khz Power At 8 Ohms) 100 Db (A-Weighted), Thd < 0.5%, Frequency Response (At 1W, 20 Hz - 20 Khz) + 0 Db, -1 Db, Crosstalk (Below Rated Power) 20 Hz To 1 Khz >70 , Iec Power Connector 15A Make: Crown , Two-Channel, 2100W @ 4O Power Amplifier Having Channels 2, Sensitivity 1.4V, Rated Power Output (Per Channel) 3000W 2O, 2100W 4O, 1200W 8O, Signal To Noise Ratio (Below Rated 1 Khz Power At 8 Ohms) 103 Db (A-Weighted), Thd < 0.5%, Frequency Response (At 1W, 20 Hz - 20 Khz) + 0 Db, -1 Db, Crosstalk (Below Rated Power) 20 Hz To 1 Khz >70 Db, Iec Power Connector 20A Make: Crown , Cinema Processor: Cinema Porcessor Having I/Os - 1 Xgb Ethernet (1 Ooobase-Ti Rj-45), 1Xusb 3.0 1 X Hdmi 2.0Input, 1 X Hdmi 2.0Output (Video Pass-Through), 2 X 8-Channel Aes-3 Inputs (Rj-45), 2 X Aes-3Id Auxiliary Inputs (Bnc Female), 1X Microphone I Rta Input (Xlr Female), 2 X Non-Sync Analog Input (Rca Female), 1X Dolby Atmos Connect Input (Rj45 I Blu Link Return Path Only), 1X Dolby Atmos Connect Output (Rj45i Aes67 Or Blu Link), 2 X 8-Channel Analog Outputs (Db25 Female) 2 X Hini Analog Output (Rca Female), 1 X Rs-232Serial Automation Port (Db9 Male) Audioprocessing Features Dolby Surround 7.1 And 5.1Playback From Cinema Server, Dolby Digital® (Ac-3) Dolby Digital Plus™ Dolby Truehd Audio Dolby E, Supported Sample Rates Of: 44.1 Khz, 48 Khz And 96 Khz At 16, 20 And 24 Bit, Aes67 Or Blu-Link Protocols For Digital Output, Alternative Content Surround Processing, High Resolution, Multi-Rate Eo, Internal Crossover Supports Up To 3-Way Loudspeakers Control. Touchscreen Front Panel User Interface, Web-Based User Interface. Ascii Commands Over Ethernet Or Serial Ports, Web Servicesapi For Control From Servers Or Third-Party, Tm Snmp For Monitoring From A Noc Power Input: 100 - 240Vac, 0.64 - 0.30A, 50 - 60Hz, Power Consumption: Nominally< 60W; 64-72W Max, Btu Rating: 205 Btu/Hr, Make: Dolby , Mounting Bracket For Surround Speakers , Equipment Rack , Interconnects & Connectors For Rack , 2 Core, 2.5 Sq.Mm Speaker Cables (90 Mtrs) , 2 Core, 4.0 Sq.Mm Speaker Cables (90 Mtrs) , 2 Core, 4.0 Sq.Mm Speaker Cables (90 Mtrs) , Installation & Programming Charges , Stage Speaker System (Left & Right): Live Line Array Sustem Having Power Rating 800 W / 1600 W / 3200 W Frequency Range (-10Db) 57 Hz - 20 Khz Dimensions (H X W X D) 343Mm X 597Mm X 376Mm (13.5In X 23.5In X 14.8In) Frequency Response (±3 Db) 75 Hz - 20 Hz Coverage Pattern 100 X 15 Nominal Crossover Modes Bi-Amp / Passive, Externally Switchable Crossover Frequency 132 Db Spl Peak 1.2 Khz Maximum Spl (1M) 130 Db Spl Peak (Passive Mode) Lf: 130 Db Hf: 139 Db Sensitivity Passive: 95 Db Spl Bi-Amp Lf: 95 Db Spl Bi-Amp Hf: 114 Db Spl Lf Driver 1 X Jbl 2262H 305 Mm (12 In) Differential Drive® Woofer With Neodymium Magnet, Dual Voice-Coils, And Dual Magnetic Gaps. Hf Driver 3 X Jbl 2408J, 38 Mm (1.5 In) Voice-Coil, Neodymium Compression Driver Nominal Impedance Passive = 8 Ohm Bi-Amp Lf = 8 Ohm Bi-Amp Hf = 8 Ohm Enclosure 18 Mm, 11-Ply Birch Plywood Suspension / Mounting Optional Vrx932la-Af Line Array Frame Kit Finish Black Duraflex™ Finish Grille Power Coated, Black, 16-Guage Perforated Steel With With Acoustically Transparent Foam Inputs Neutrik® Speakon® Nl-4 (X2) , Subwoofers: Live Subwoofer System Having Power Rating 800 W / 1600 W / 3200 W Frequency Range 31 Hz – 220 Hz Dimensions (H X W X D) 508 Mm X 597 Mm X 749 Mm (20.0 In X 23.5 In X 29.5 In) Frequency Range (-10Db) 31 Hz – 220 Hz Recommended Crossover Frequencies 80 Hz, 24 Db / Octave Hpf80 Hz, 24 Db / Octave Lpf System Maximum Spl 130 Db Spl Peak System Sensitivity (1W @ 1M) 95 Db Spl Lf Driver 1 X Jbl 2268H 457 Mm (18 In) Differential Drive Woofer Nominal Impedance 8 Ohms Enclosure Rectangular, 18 Mm, 13-Ply Birch Plywood Finish Black Duraflex™ Finish Grille Powder Coated, Black, 16-Gauge Perforated Steel With Acoustical Transparent Charcoal Foam Backing. Inputs Neutrik® Speakon® Nl-4 (X2) Net Weight (Each) 37 Kg (81 Lb) , Amplifiers: Power Amplifier, Input Channels : 2 Or Better Power Output: 3000 Watts 2 Ohm Stereo Per Ch, 2100 Watts 4 Ohm Stereo Per Ch, 1200 Watts 8 Ohm Stereo Per Ch, 4200 Watts 8 Ohm Bridge-Mono, 6000 Watts 4 Ohms Bridge-Mono Or Better, Sensitivity (For Full Rated Power At 4 Ohms): 1.4V Rms Or Better, Frequency Response (At 1 Watt, 20 Hz - 20 Khz): +0 Db, –1 Db Or Better, S/N Ratio (Below Rated 1 Khz Power At 8 Ohms):103 Db Or Better, Thd: <0.5% Or Better, Damping Factor (20 Hz To 1 Khz):> 500 Or Better, Crosstalk (Below Rated Power): 20 Khz - 1 Khz: >70 Db Or Betterinput Impedance(Nominal):20K Ohms Balanced,10K Ohms Unbalanced Or Better, Maximum Input Signal: +22 Dbu Typical Or Better , Dsp Processor: Networked Digital Signal Processor With 12 -16 Or Above Inputs And 8 - 10 Or Above Outputs; Should Have 12 -14 Control Inputs And 6 -8 Logic Outputs For Gpio Integration; 48V Phantom Power On All Analog Inputs; Thd: <0.01% 20Hz To 20Khz; Crosstalk: <-75Db Orbetter; Open Architecture Software Configurable; Separate Logic Processing Power; Should Have Built-In 2 X Rj45 Ports Compatible With Dante / Aes67 / Any Proprietary Protocol For Audio Signal Inputs & Outputs Routing Digitally Over An Ethernet / Catx Cable; 1 Ethernet Port For Monitoring And Configuration; Capable To Handle +5V Unloaded Logic Output Voltage; Should Have Speech Sense Engine; Capable To Control 3Rd Party Devices With Tcp Ip And Rs232; Should Have 1Nos Of Rs 232 Port For Integration With Control System; Should Have Bi-Directional Locate Functionality; Should Have 48 Or More Digital Audio Channel Bus; Should Have Monitoring Led For Com, Stat, Err And Pwr; Etc. , Mixer & Equalizer: Soundcraft, Si Expression 2 , Graphic Equalizer; Should Be Dual Channel 31-Band Graphic Equalizer; Shoul Support Features Like 1/3-Octave Constant Q; Frequency Bands; Switchable Boost/Cut Ranges Of ±6 Or ±12 Db; Front Panel Bypass Switch; 4-Segment Led Ladders For Monitoring Output Levels; Xlr And Trs Inputs And Outputs; Frequency Response Of <10 Hz To >50Khz; Dynamic Range Of Greater Than 108Db; Etc. , Stage Monitors: Stage Monitors Having Frequency Range (-10Db) 50 Hz - 20 Khz (4?) Frequency Range (-3 Db) 65 Hz - 17 Khz (4?) Coverage Pattern 90° X 50° Transducer Impedence Rated: Woofer: 4 O Tweeter: 8 O Max Spl 132 Db Power Rating 2000W Peak / 1000W Rms Cooling Natural Convection No Fan Crossover Frequency 2050 Hz I/O X2 Combo Inputs And X1 3.5 Mm Stereo Jack X2 Xlr Through Out And X1 Mix Out Suspension/Mounting 6X M10 Suspension Point And Pole Mount Product Dimensions (H X W X D) 636 X 394 X 332 Mm (25 X 15.5 X 13.1 In) , Microphones: Wired Vocal Microphone Should Be Professional Dynamic Handheld Microphone And On/Off Switch; Should Support Polar Pattern Supercardioid Orbetter Audio Frequency Bandwidth 70 To 20000Hz Ormore; Sensitivity 2.6 Mv/Pa Or Better; Electrical Impedance : 600 Ohms Or Better; Recommended Load Impedance : 2000 Ohms Or More; Connector Type : 3-Pin Xlr Male (Balanced);Metal Body; Etc , Wired Dynamic Instrument Microphone With Cardioid Orbetter Dynamic Instrument Microphone; Audio Frequency Bandwidth 40-20000Hz Ormore; Sensitivity 2.5 Mv/Pa Or More; Max. Spl 47Db Or More; Etc. , Digital Wireless Handheld Microphone System With Reciever, Audio Link Frequency Ranges, Q1-6 R1-6 R4-9 S1-7 S4-7 S7-10 U1/5 V3-4 Y1-3 470.2 - 526 Mhz 520 - 576 Mhz 552 - 607.8 Mhz 606.2 - 662 Mhz 630 - 662 Mhz 662 - 693.8 Mhz 823.2 - 831.8 Mhz & 863.2 - 864.8 Mhz 925.2 - 937.3 Mhz 1785.2 - 1799.8 Mhz Bluetooth® Low Energy, (Ble) Frequency Range, 2402 - 2480 Mhz, Audio Frequency Response 20 Hz - 20 Khz (-3 Db), @ 3 Dbfs, Audio Thd = -60 Db For 1 Khz, @ -3 Dbfs Input Level, Dynamic Range 134 Db, System Latency 1.9 Ms, Operating Temperature -10 °C - +55 °C, (14 °F - 131 °F), Relative Humidity 5 - 95 % (Non-Condensing),Rack Receiver Input Voltage 11 - 13 V ?, Input Current = 300 Ma, Transmit Power (Radiated) Ble: Max. 10 Mw Eirp, Audio Output Power 18 Dbu Max. Handheld Transmitter Input Voltage 2.0 - 4.35 V, Input Current < 300 Ma, Power Supply 2 Aa Batteries 1.5 V (Alkali Manganese) Or Ba 70, Rechargeable Battery Pack, Occupied Bandwidth 200 Khz, Transmit Power (Radiated) Audio Link: 10 Mw Erp, (Range Y1-3: 12 Mw Erp), Ble: Max. 10 Mw Eirp, Transducer Principle Dynamic, Sensitivity 1.8 Mv/Pa, Sound Pressure Level 154 Db Spl, Pick-Up Pattern Supercardioidcapsule Transducer Principle Dynamic Sensitivity 1.6 Mv/Pa Sound Pressure Level 154 Db Spl Pick-Up Pattern Supercardioid , Array Frame For Vrx932la-1 , Equipment Rack 22U , Interconnects & Connectors , 24 Core Snake Cable With Drum , 2 Core, 4.0 Sq.Mm Speaker Cables (90 Mtrs) , Conduit For Laying Speakers Cables , Installation & Programming Charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
27.
Educational and Research Institute #9034494 Technical Bid
Supply Of Surgical Consumables ( Left Out / New Consumables ) -1 2 Stage Femoral Venous Cannula 2 Acd Solution Bag 1000 Ml 3 Acrylic Powder ( For Cranioplasty ) 4 Advance Fixation Balloon Trocar With Fios 5 Aluminium Canisters For 750 Ml Bags For Keeping Cryocytes Bags Used In Bone Marrow Transplant 6 Antifog Solutions 200Ml / 400 Ml 7 Antro-Duodenal / Colonic Metal Stents, Antro-Duodenal / Colonic Metal Uncovered Stent With 6Cm, 9Cm, 12Cm & 14Cm, 22 / 27 Mm Diameter ( Duodenal ) And 25 / 30Mm Diameter ( Colonic ) 8 Apc Probe All Type Compatible With Erbe Unit 9 Audio Processor, Spares, Accessories And Consumables For Med-El Opus 2 Bte / Rondo Single / Sonnet / Samba 10 Audio-Visual Video Recorder Cat-6 Cables Compatible With Karl Storz Video Recorder 11 Auditory Brainstem Implant 12 Auditory Brainstem Implant 13 Automatic Valve Suture Knotting System 14 Auxilliary Water Tube 15 Baclofen Intrathecal Pump Kit Compatable For Existing Medtronic Neuro Stimulator In Pain Clinic. 16 Baclofen Pump 17 Balloon Intracranial 2 Lumen 18 Bariatric Endoscopic Balloon ( Spartz Type ) 19 Biofeedback Catheter Compatible With Kangaroo Geff System ( Rmh, Australia ) 20 Bipolar Heomostasis Catheter In 7 Fr / 10 Fr Outer Diameter With Gold Tip With Or Without Injector 21 Brava Elastic Adhesive Tape ( All Type & All Sizes ) 22 Breath Collection Bags For C 13 Urea Breath Test 23 Burr Hole Button 24 Button Electrode For Plasma Vaporization 25 C13 Breath Test Kit 26 Capillary Tubes, Box 1000: Heparinised As Well As Non Heparinised Compitable For Remi Brand Micro Centrifuge Model R-12 M ( 75 Mm Long1mm Bore ) 27 Capsular Hook Ophthalmic Surgery ( All Sizes ) 28 Capsular Tension Ring For Ophthalmic Surgery ( All Sizes ) 29 Carbon Octa Fluoride Gas For Retinal Detachment Surgery 30 Carotid Stent All Size 31 Cerebroprotein Hydrolysate ( Cerehenz / Cerebrolysin Etc. ) 32 Cholangioscopy Retrieval Basket 15 Mm Diameter Basket, 286 Cm Catheter Length, Compatible With 1-2 Mm Channel Diameter Of Digital Cholangioscope 33 Cholangioscopy Retrieval Snare 9 Mm Snare, 2 With 286 Cm Catheter Length, Compatible With 1-2 Mm Channel Diameter Of Digital Cholangioscope 34 Closed Suction System For Ventilator Patients 35 Coagulation Roller Electrode 36 Cochlear Implant ( Advanced Model ) 1. Should Have Better Internal Device And Proceesor One Quoted In Basic Cochlear Implant. 2. Should Be Compatible With 3 Tesla Mri With Or Without Removal Of Magnet 3. Should Have Water Resistant Speech Processor With Or Without Casing. 4. Compatible With Fm And Am Devices. 37 Collagen Spray Kit Containinghemoseal Probe With Fibro-Protein Powder 38 Complete Range Of Consumable And Accessories For Existing Davinci Robotic System. 39 Consumables Items For Compitable With Boston Integrated Monitor Processor Cum Light Source 40 Core Biopsy Track Guide Kit ( Kidney, Liver, Breast, Soft Tissue Etc ) Like Ultra-Pro Compatible For Toshiba Clt 375 Dt Ultrasound Machine, And Other Ultrasound Machines In Use At Sgpgims 41 Cryo Precurved Homograft 42 Cryocyte Bags With Freezing Eva Over Warp Bags 750 Ml / 500 Ml 43 Ctg Paper Compatible With Existining Machine I.E. Bionet 44 Cutter Blade / Diamond Burrs / Chuch Burrs All Types And Sizes Compitable With Stryker Micro Debrider And High Speed Drill Systems. 45 Cutting Loop Electrode 46 Cvts - Aortic Cross Clamps For Minimal Cannulation ( All Sizes & Type ) Along With Their Inserts. 47 Cvts - Schaefer’S Calipers For Aortic Valve Repair 48 Cvts - Internal Paddles For Defibrilators S / M / L Sizes Compatible With Defibrilators Available In Ot Compatible Medtronic / Philips / Mindray / Bpl Etc. 49 Cyanoarylate Glue For Coronary Injection 50 Cystogastrostomy Metal Stents For Eus Guided Drainage, Cystogastrostomy Metal Stent With Large Lumen 14 Mm And 16 Mm, Stent Length 2 Cm And 3 Cm, Catheter Compatible With 3.8 Mm Channel, Catheter Length 180 Cm 51 Cystoscopy Forceps Flexible Allegators Forceps ( Indian ) 52 Cystoscopy Forceps Flexible Bx Forceps ( Indian ) 53 Dbs, All Consumables 54 Digital Hearing Aid Low Cost 55 Disposable Bag Compitable With Fresinius Volumetric Infusion Pumps 56 Disposable Face Mask With Visor 57 Disposable Laryngoscope Blade With Handle 58 Disposable Nursing Scissors, 5 Inch Blade, Plastic Handle ( Individual Sterile Pack ) 59 Disposable Plastic Needle Holder – Individual Sterile Pack 60 Disposable Sterile Protector Caps For ‘Y’ Piece Connectors 61 Disposable Sterile Protector Caps For Ambu Bag 62 Disposable Sterile Protector Caps For Bain Circuits 63 Disposable Sterile Protector Caps For Various Airway Gadgets And Ventilator Circuits 64 Disposable Suture Removal Scissors, Small Blade, Plastic Handle ( Individual Sterile Pack ) 65 Disposable Syringe Kit For Pressure Injector 200 / 200Ml 66 Disposable Thermal Drapes - Blanket ( Adult ) 67 Disposable Thermal Drapes For Foot ( Adult ) 68 Disposable Thermal Drapes For Head ( Adult ) 69 Disposable Thermal Drapes For Leg ( Adult ) 70 Disposable Tough-Cut Scissors, 7.5 Inch Blade, Plastic Handle ( Individual Sterile Pack ) 71 Dissecting Tools All Types Compatible With Midas Rex And Aesculap Of All Size For Neuro Surgery Ot 72 Dome Valve Vp Shunt System 73 D-Piece For Hydrogen Breath Analyzer 74 Dressing - White Paper Adhesive Dressing Roll 5 Mm Width 75 Dressing Strip ( Wash Proof ) 76 Drill Bits Both Policing And Diamond Of All Sizes Compatible With Medicon Ent Drill 77 Drill Bits Of All Different Sizes Compatible With Medtronics 78 Drill Bits Of All Sizes Compatible With Unidrive Siii Neuro Karl Storz System- For Endonasal Surgery 79 Drill Bits Of All The Sizes Compatible With Ausculap Drill Machine ( Hyaline Xs ) 80 Drill Bits Of All The Sizes Compatible With Medtronics Drill Machine ( Pm 100 And Pm 700 ) Different Attachment Of Drill Of All The Sizes Competable With Medtronics ( Pm 100 And 700 ) 81 Drill Bits, Shaver Blades And Oscillating Blades For Stryker Ent Drill 82 Drill Oil Compatible With Medicon, Ausculap, Karl Stroz, Medtronics, Stryker 83 Dry Cleaning Paper ( Strong Absorption Ability, Economical And For Industrial Use ) - All Standard Sizes, With The Provision To Supply 100 Mop Pad And Handle Free Of Cost ( Provide All Details Of Gsm And Type Of Fabric ) 84 Dviu Knife All Types And Sizes 85 Ecg Paper 3-Channel Compatable With Phillips Life Pack Defibrillators 86 Ecg Paper Size Compatible With All Machine 87 Ecg Roll For Magic Rx Machine 88 Electrodes, Neonatal, Box Of 200 Sets Of 3 Electrodes For Ecg-Recorder And Monitoring 89 Elete-100 90 Endo Mechanical - Laparoscopic Equipment Cleaning And Maintenance Devices 91 Endoscopy Capsule Compatible With Mircocam Recorder ( Intromedic ) 92 Endoscopy Capsule Compatible With Pillcam Recorder ( Medtronic ) 93 Enucleation Electrode 94 External Transducer For High Resolusion Manometry System 95 External Ventricular Drain Set 96 Extra-Corporeal Membrane Oxygenation ( Ecmo ) Disposable Kit With The Provision Of Free Supply Of 02 Ecmo Machines For The Entire Period Of Rate Contract 97 Fiducial Marker ( For Neuronavigation Of Medtronics ) 98 Fine Cross Micro Catheter Terumo Type. All Sizes And Lengths 99 Fine Suction Tip For Ent 100 Fixed Blades- Standard Depth ( 28705 ) 101 Flatpak Mouth Pieces For Hydrogen Breath Analyzer 102 Flexible Intrauterine Suction Curette Karman Style All Types & All Sizes 103 Forced Air Warming ( Faw ) System. Heated Mattress ( Specially For Children ) 104 Free Lateral Polypropylene Prosthesis All Size 105 Fully Covered Removable Esophageal Metal / Stents, Removable Esophageal Metal Stent With Dia 18Mm, 20Mm, Length 10Cm, 12Cm, 15Cm 106 Gel Based Advance Access Platform 107 Gel Based Laparoscopic Systems 108 Gigli Guide Wires And Gigli Saw For Craniotomy 109 Gold Fiducial Soft Tissue Markers For Prostate: 1.2X3mm Gold Fiducial, Needle: 17 Gauge 20Cm Length, Visible In Trus, Bat, Portal, Mri, Ct, And S-Ray, Ideal For Image Fusion, The Surface Of The Markers Is To Be Textured Through A Micro-Abrasion Process Which Helps Prevent Market Migration 110 Graft 5Mm X 80 Cm Ringed Graft Dacron Coated 111 Graft 5Mm X 80 Cm Ringed Graft Ptfe Coated 112 Graft 6Mm X 80 Cm Ringed Graft Dacron Coated 113 Graft 6Mm X 80 Cm Ringed Graft Ptfe Coated 114 Graft 7Mm X 80 Cm Ringed Graft Dacron Coated 115 Graft 7Mm X 80 Cm Ringed Graft Ptfe Coated 116 Graft 8Mm X 80 Cm Ringed Graft Dacron Coated 117 Graft 8Mm X 80 Cm Ringed Graft Ptfe Coated 118 Graft Dacron Trifurcated All Type & Sizes 119 Granulocyte Collection Kit For Apheresis Procedure Compatable For Optia Cell Seperator 120 Handle Malleable Occlusion System 121 Heat Moisture Exchangers For Children And Infants 122 Hemo Spray Kit 123 Hepaticogastrostomy Metal Stent For Eus Guided Drainage, Hepaticogastrostomy Metal Stent Length 6 Cm, 8 Cm, 10 Cm, With Long Covered Portion, Catheter Compatible With 3.8 Mm Channel Or Larger, Catheter Length 180 Cm 124 High Flow Infusion Catheter 2.5F, 2.8F, 3.0F 125 High Flow Nasal Cannulae System ( Neonatal Size ) , Flexible, Kink Free Tubing With Adhesive Pads To Secure On Skin, Compatible With Use With Heated Humdifier, - Sizes- Preterm Neonate , Term Neonate, Infant And Paediatric Applications 126 High Flow Nasal Cannulae System ( Neonatal Size ) , Flexible, Kink Free Tubing With Adhesive Pads To Secure On Skin, Compatible With Use With Heated Humdifier, - Sizes- Preterm Neonate , Term Neonate, Infant And Paediatric Applications 127 Hose System Disposable Compatible With Soring Sonoca 300 - Cusa Machine Connecting Cable For Micro And Microhand Piecs Soring 300 - Cusa Machine 128 Hydrogen Breath Test Calzbratian Gas 129 Hydrogen Breath Test Sensor 130 Hydrophilic Guide Wire ( Terumo ) Hydrophilic Guide Wire Diameter: 0.032 And 0.025, Length 260 Cm And 450 Cm, Straight And J Tip 131 Hydrosurgery System Kit ( All Sizes Of Disposable Hand Pieces ) With The Provision Of Free Supply Of 03 Machines - All Types Should Be Quoted 132 Icg Dye / Aurogreen 133 Icp Monitoring Device With Consumables 134 Impedance Ph Metry Catheter ( 8 Channel = 6 Impedance And 2 Ph ) 135 Implant - Barb Wire For Canthopexy 136 Implant - Breast Tissue Expander Cum Implant / Prosthesis ( Such As Mentor ) For Post-Mastectomy Reconstruction: All Shapes And Sizes.Usfda / Ce Approved. Preference Would Be Given To Complany / Vendor Who Can Provide Wide Range Of Products 137 Implant - Dental Implants With Implant Kit, Physiodispenser And Lab Work 138 Implant - Green Imf Elastics 139 Implant - Medial Arch Orthosis ( All Sizes ) 140 Implant - Phalangeal Joint ( Should Be Of Multiple Sizes, The Implants Should Have Usfda / Ce / Ethical / Clearances From Appropriate Authorities, Should Have Experience Of Supplying Such Implants To Other Plastic Surgery Departments Of Repute In India ) 141 Implant - Set Of Lrs ( 9 Pin + One Rail + Three Clamps ) 142 Implant - Silicone Tissue Expanders Of Various Sizes And Shapes ( The Implants Should Have Usfda / Ce / Ethical Clearances From Appropriate Authorities, Should Have Experience Of Supplying Such Implants To Other Plastic Surgery Departments Of Repute In India ) 143 Implant - Tumor Prosthesis System 144 Implants - Breast Implants Of All Shapes ( Round And Anatomical ) ; All Types ( Silicon Gel Filled, Cohesive Gel Filled And Saline Filled ) ; Plain And Textured; All Profiles ( Low, Moderate, High ) And All Sizes. Usfda / Ce Approved. Preference Would Be Given To Complany / Vendor Who Can Provide Wide Range Of Products 145 Indocyanin Green Dye ( For Intraoperative Angiography ) 146 Infrared Reflecting Gleons Compatible With Medtronic Stealth Station - 7 147 Initial Rod For Pcnl Dialation Indian & Imported 148 Injection Cynoacrylate Glue 149 Instrument Channel Cap 150 Integuseal, Microbial Sealant, Latex Free, Non Cytotoxic - 50Cm X 25Cm 151 Introducer Needle, 1Fr, 18Mm Length 152 Ionm Consumables Such As; Leads, Electrodes, Corkscrew Electrodes, D Wave Electrode, Mono Polar And Bi Polar Nerve Stimulator Including Strip Electrode ( 8X4 ) ( 4X2 ) Competable With Natus 153 Izi Prostate Gold Marker ( A Set Of 3 ) 154 Laparoscopic Disposable Sealing Valve / Cap Compatible With Disposable Laparoscopic Cannula All Sizes And All Types ( Pediatric, Adult And Bariatric ) -15, 12, 10, 5, 3 Mm 155 Laparoscopic Pressure Irrigation System 156 Laparoscopic Suction System ( Disposable ) And Irrigation System ( 3Mm ) 157 Laproscopic Ultra Gun 158 Laser Fiber-Accumax & Flexiva: Polished Out Tip, Durability 1Cm Bend Diameter, 1.5Cm Bend Diameter, Full Defleclectable 159 Latex Free Variceal Ligation And Set With 7 Bands 160 Lead Compatible With Macquet Heart Lung Machine 161 Levine Pressure Syringe With Manometer For Ballon Dilatation 162 Link Hp ( Can Withstand Pressure As High As 1200 Psi Because Of Special Washers, Tubing Completely Latex Free, Dehp Free, Pvc Free ) 163 Linton-Nachlas Balloon For Gastric Varices 164 Lissamine Gree Strips 165 Long Term Chronic Carbothene Catheter Kit ( Paed ) 14.5 Fr, Double D Design, Tip To Cuff Length 13 Cm 166 Loop Tip Guide Wire ( 035 X 450 Cm ) 167 Loop Wire 168 Low Profile Biliary Metal Stent, Low Profile Biliary Metal Stent, Constrained Stent Diameter 6F, Released Diameter 10 Mm With Radio-Opaque Markers On Stent, Length 6 / 8 / 10 Cm 169 Lpd Set For Surgery Including All Types Of Accessories For Paediatric And Adult. 170 Lumbar Nucleoplasty Wand All Type 171 Magill Forcep ( Adult / Pead ) 172 Mapping And Speech Therapy For Cochlear Implant Recipients. 173 Mastoid Retractor Disposable 174 Menghini’S Needle All Size And Shape 175 Methylene Blue Dye 2% W / V Sterile 176 Micro Debrider Blades For Endo Surgery & Endo Nasal Surgery Comptible With For Karl Storz Drill Systems 177 Micro Vessel Clamp Like Mini Clip For Internal Mamway Artery Size <_8Mm 178 Microdebrider Shaver Blade ( Straight And Angled, 40 & 60 Degree ) Comptable With Karl Storz 179 Microdebrider Shaver Blades Of All Sizes Compatible With Unidrive Siii Neuro Karl Storz System For Endonasal Surgery 180 Microdissecting ( Colorodo ) Needles - Stryker 181 Microdissecting Needle ( Angled ) Colorodo Needle ( Angled ) 182 Microvascular Surgical Knife For Scoring And Arteriotomy 183 Mini Plates And Screws 184 Mini Tracheostomy Non Seldinger Kit 185 Mnc Kit For Apheresis Procedure Compatable For Optia Cell Seperator 186 Multichannel Ph- Impedance Catheter Compatible With Zepher System ( Sandhill ) 187 Nasal Cpap 10Cm H20 188 Nasal Tampoone Polymethylene 8 Cm 189 Nasojejunal Tube Made Of ( Pvc ) Polyvinyl Chloride, 14 F And 16 F Diameter 190 Needle For – Sacrospinal Puncture In Pelvic Floor Mesh Repair 191 Needles – Straight And Curve ( All Types ) Inidan 192 Nelson Inhaler 193 Neontal Weighing Machine Up To 5 Kg 194 Nephrostomy Catheter Malecot 6Fr To 24Fr ( Silicon ) 195 Neuro-Navigation Fiducial Marker Compatible With Medtronics Neuronavigation System 196 Nucleotome Probe 197 Nummit Spray ( Topical ) 198 Oil For Diffuser Mr7 / Pm 100 Compatible With Midas Rex For Neuro Surgery Ot 199 Oil Spray Compatible With Midas Rex For Neuro Surgery Ot 200 Ophthalmology - Amniotic Membrane 201 Ophthalmology - Iris Hook Ophthalmic Surgery ( All Sizes ) 202 Ophthalmology - Laser Probe ( Curved ) 23G, 25G 203 Ophthalmology - Silicon Sling For Frontalis Suspension 204 Opthalmology - Merocels Bandage 205 Optia Plasma Exchange Set 206 Oral Care Multi-Port Canister - Single Packed, Non-Sterile 207 Oral Sponge / Swab Without Suction Port Sodium Bicorbonate 208 Oral Sponge / Swab Without Suction Port With Hydrogen Peroxide 209 Oropharyngeal Airway With Cuff 210 Otology Drills, Blades And 30 K Burrs Compatible With Ipc Medtronics 211 Oxygen Cannulae, Nasal , Adjustable Nasal Tips, Open, Straight And Rounded Distal End, Size: Int.-Ext. Dia: 1.5-2.7, 2.0-3.4, 2.5-4.0Mm, Length-30Cm 212 Paediatric Tracheostomy Tube - Cuffed And Uncuffed Tube 213 Panorama Noaba Face Mask With Corrugated Tube Carrying Strap Combination Jumbo Canister 214 Paracervical Block Needle Device Length 19Cm A Luer Lock Connector -Needle Size - 30G X 4Mm 215 Paracervical Block Needle Device Length 19Cm A Luer Lock Connector -Needle Size - 30G X 6Mm 216 Pcnl D Set For Surgery Including All Types Of Accessories. 217 Pd Flow Set ( Automated With Cassette ) 218 Pediatric Hassons Cannula ( 5Cm / 6Cm ) 219 Percutanious Discetomy Probe All Type 220 Pereyra-Roz Ligature Carrier All Type & All Sizes 221 Peritonial Tunneling Stylet 222 Pi Docking Device For Femto Lasik Surgery For Cornea Refractive Surgery 223 Piles Band - Indian Make 224 Piles Binding Instrument- Reusable 225 Pneumatic Inflator For Achalasia Balloon Or For Cre Balloons 226 Polyetheleneglycol Powder 227 Portable Ventilator / Respiratory Support Device 228 Postrier Vitrectomy Pack - Oertli For Retinal Surgery 23G And 25G 229 Premature Soft Tip Nasal Cannula Should Have Soft Tip Nasal Cannula With Tubing. Ce Marked. 230 Presenration Solution For Vein Graft. 231 Pressure Injector Syringe For Ct, All Sizes 232 Pressure Injector Syringe For Dsa, All Sizes 233 Pre-Tied Suture Endoscopic Loop Ligature 234 Programmable V P And Lumbo Peritoneal Shunt System 235 Promethus System – Consists Of Prometh 1 Adsorber, Prometh 02 Adsorber, Albuflow Afo 1, Blood Line Primary And Secondary Set, F 60 Dialyser, Y – Adapter, Spike Adapter And Dialyser Exchange Set 236 Protect Mark ( Circle ) 3 Nos. 237 Protect Mark Circle Or Point Mark Guard. To Protect The Marking On The Skin Packed In 3 Nos. 238 Provox Prosthesis Or Similar 239 Ptosis Silicone Band All Types & Sizes 240 Pull Apart Introducer Set 241 Quick Transfer Spike ( Vial To I.V. Fluid ) 242 Radiation Protection Pro Gloves For Cathlab 243 Radio Frequency Probes ( Trans Foraminal Endoscopy Bipolar Flexible Probe With Complete Set ) 244 Radiofrequency Bipolar Hemostatic Probe ( Working Length-375Mm Od-2.5Mm ) For Transforaminal Endoscopic Surgery Compatible With Endoscope System 245 Radiofrequency Hemostatic Probe For Transforaminal Endoscopic Surgery 246 Radiotherapy Vaccum Bags For Body Region. To Be Used On Med Tec Table Top. Should Be Re-Usable. 247 Radiotherapy Vaccum Bags For Head And Neck Region. To Be Used With S Type Med Tec Base Plate. Should Be Re-Usable. 248 Rat Tooth Grasping Forceps With Jaw Length 2Mm - 5 Mm, 2.3 Mm Diameter With Catheter Length 180 Cm And 230 Cm 249 Rehab- Cerebral Palry Chair 250 Rehab- Hip Knee Ankle Fast Orthors Without Drop Lock 251 Rehab- Knee Ankle Fast Orthosis With Drop Lock 252 Rehab- Partial Foot Prosthesis ( Shoe With Filler ) 253 Rehab- Somi ( Sterno Occipital Mandibular Immoblizer 254 Rehab- Spinal Brace Knight Taylor 255 Rehab- Thomas Splint ( All Sizes ) 256 Rehab- Upper Extremity Prosthetics Shoulder Disarticulation Body Powered Prosthesis 257 Rehab- Upper Limb Kleinert Splint 258 Rehab- Upper Limb Knuckle Bender Splint 259 Rehab- Varus / Valgus Insole 260 Renal Guiding Catheter All Types And All Sizes 261 Renal Transplant Set For Surgery With Complete Accessories 262 Reneys Clip For Craniotomy 263 Right Angle Dissector Acute [ 90 Degree ] 10 Mm 264 Right Angle Dissector Obtuse / Curved [ Greater Than 90 Degree ] 10 Mm 265 Right Angled Hook Electrode For Valve ( L-Shaped ) Compatible With 9.5 F Resectoscope 266 Rosa Filter Compatible With Hemofenix Device For Membrane Plasmapheresis 267 Sampling Site Coupler Swabbable Port 268 Saw Blades ( Should Be Able To Supply All Types And Sizes Of Blades To Be Used With The Power Drill Saws, The Saws Include Reciprocating, Oscillating, Transeverse, Etc., Should Have Usfda / Ce / Ethical Clearances From Appropriate Authorities, Should Have Experience Of Supplying Such Implants To Other Plastic Surgery Departments Of Repute In India ) 269 Scalpel Blade Removal Systerm ( Blade Box ) 270 Scalpel Blade Removals; Should Remove All Common Blades, Immediate Containment Of Blade Upon Removal, Should Confirm To Australian / New Zealand Standard As / Nzs 3825; 1988 271 Schirmer Tear Strips 272 Scribner Shunt Vessel Tip 273 Sealing Compound, Capillary Tubes, Pck 500 G 274 Segura Basket: Flatwire Construction, 13Mm Three Wire Basket, Detachable Handle 275 Sengstaken Black More Tube ( Adult ) 276 Sengstaken Black More Tube ( Paed ) 277 Sengstaken Blakemore Baloon For Variceal Tamponade 278 Sensor Kit For Lithium Dilution Cardiac Output, S.P.V., P.P.V. And S.V.V. Measurement With External Calibration With The Provision Of Free Supply Of 05 Monitors For The Entire Period Of Rate Contract 279 Sensor-Wire: Hydrophilic Floppy, Tip, Tungsten Filled Radio Opaque Tip, Nitinol Core / Ptfe 280 Silicon Buckle All Sizes & Types 281 Silicon Gel, Jelly Or Spray For Use With Tracheobronchial Stents 282 Silicon Sling For Glucoma Surgery 283 Silicon Sling For Ptosis Surgery 284 Silicon Tracheo Bronchial Stent Straight ( All Sizes & Shapes ) 285 Silicon Tracheo Bronchial Stent Y Shaped ( All Sizes & Shapes ) 286 Silicone Sling For Ptosis Surgery 287 Silicone Tracheobronchial Stents ( Straight And Y Stent ) , Such As Dumon Stents, And Similar Products. Straight Stents With And Without Collar Outer Diameter - 5 -20 Mm Length - 100 -110 Mm, Wall Thickness - 0.5 - 1.5 Mm Y - Stents Outer Diameter - 12-20 Mm, Length 20-110 Mm Limb Diameter 10-14 Mm, Length 15-50 Mm, Wall Thickness - 0.5 - 1.5 Mm, Bronchial Stenosis Stents ( Broad Distal And Proximal End With Narrow Central Part ) Outer Diameter - 10- 8-10 To 18-16-18, Length - 12 -20 Mm, Wall Thickness - 0.5 - 1.5 Mm 288 Silicone Vacuum Cup ( Autoclavable For Repeated Use, All Sizes ) 289 Single Use Micro Pore Filter 5 Μm 290 Skin Punch Biopsy Needle 291 Slego Connector For P.D. 292 Slide, Microscope, 76X26mm / Box-100 ( 2X50 ) 293 Small Instrument For Routine Use In Neurosurgery Operative Procedure 1. Ventricular Needle, 2. Fish Hooks, 3. Dural Hook, 4. Hudson Brace 5. Perforator And Burr 6 Disc Forceps 1 To 5 Mm 7. Kerrison Upcut 1 To 5 Mm Any Size 8. Dural Needle Holder 5 Inches ( Tc ) 9. Mayo Suture Cutting Scissors ( Tc ) Straight And Curved & Inches 10. Bayonet Plain Forceps Fine Tip, 11. Metanbaoum Tissure Scissors Tc Curved 6 Inches 294 Sodium Azide 295 Sodium Fluorescein 296 Sonosurg Curved Scissors Hf Inline Grip 5Mm X 9Mm Compatible With Olympus Ultrasonic Surgical System 297 Sonosurge Curved Scissor Hf Pistal Grip 5Mm X 34Cm Compatible With Olympus Ultrasonic Surgical System.. 298 Spacer Device ( Tranparent ) For Pediatric Patients With Baby Mask. Should Have Expiratory Valve, Should Be Compatible With All Inhalers 299 Spacer Device For Inhaler ( Transparent ) Compatible With All Inhaler. Should Have Expiratory Valve, Should Be Compatible With All Inhalers 300 Sperm Launcher Iui Catheter / Cannula ( A ) 6Cm ( 6 / 8Fr, Makler Type, Side Open ) 301 Spo2 Leads Compatible With Mindray 302 Sponge Holder Approximately 07 Cm Plastic ( Sterile And Disposable, Individually Packed In Csr Wrap ) 303 Sponge Holder Approximately 15 Cm Plastic ( Sterile And Disposable, Individually Packed In Csr Wrap ) 304 Sponge Holder Approximately 20 Cm Plastic ( Sterile And Disposable, Individually Packed In Csr Wrap ) 305 Squeegee Sponger With The Provision Of Free Supply Of 40 Squeegee ( Provide All Details Of Gsm And Type Of Fabric ) – Green, Orange, Yellow And Blue 306 Srt Brain Lab Cast For Head, Consists Of Realand Front Cast, Along With Middle Cast And Granules For Nasion Bridge Fabrication For Head Immobilization 307 St Thomas Cardioplegia Solution 308 St. Marks Anal Dialator All Sizes 309 Stand Free Square Litter Bins Capacity : 20 Ltrs 310 Stand Free Square Litter Bins Capacity : 40 Ltrs 311 Stand Free Square Litter Bins Capacity : 50 Ltrs Top Od With Lid : 375 X 320 Mm Approx, Bottom Od : 305 X 250 Mm Approx, Height : 575 Mm Approx ( Without Lid ) 312 Stand Free Square Litter Bins Capacity : 60 Ltrs Top Od With Lid : 350 X 350 Mm Approx, Bottom Od : 250 X 250 Mm Approx, Height : 700 Mm Approx ( Without Lid ) 313 Stand Free Square Litter Bins Capacity : 80 Ltrs Top Od With Lid : 400 X 400 Mm Approx, Bottom Od : 300 X 300 Mm Approx, Height : 705 Mm Approx ( Without Lid ) 314 Sterile Air Filters 315 Sternal Band 316 Stone Grasper ( Biprong ) ( Flexible 5 Fr, Lt. 40 Cm ) 05 No. 317 Streaming Microwire 318 Stride Microcatheter 319 Suction Coagulation 320 Suction Coagulator With Disposable Hand Control With 3 Prong Connector Along With Handle, Cannula All Sizes For Comptable With Esu-Megapower 321 Suction Machine Electrical Driven 322 Suction Machine Mechanical Operated 323 Suction Tubing Transil Tubing 324 Sulfurhexa Fluoride Gas For Retinal Detachment Surgery 325 Surgical Blades Diamond Tip All Types And Sizes 326 Surgical Blades, Carbonated / Steel All Types And Sizes. High Quality, Sterile, Individually Packed. Conforming To Usfda 327 Surve Organize For Cardiovascular Surgery Sutureless 328 Syringe - Glass Toomey Syringe 329 Syringe ( Heparin Coated ) 1 Ml / 2Ml For Abg 330 Syringe Auto Collect -3Ml With Needle 22G. 331 Syringe Pressure Injector 150 Ml 332 Syringe With Catheter Mount Irrigation 16G 333 Syringe With Catheter Mount Irrigatto 18G 334 Tandem Cath Long Term Dual Lumen Catheter Kits 335 Telescope 42 Cm Or More; Hd With Sapphire Tip, 0 Degree 336 Telescope 42 Cm Or More; Hd With Sapphire Tip, 30 Degree 337 Telescope 42 Cm Or More; Hd With Sapphire Tip, 45 Degree 338 Tempocem 339 Tendon Spacer Rods Of Multiple Sizes ( The Implants Should Have Usfda / Ce / Ethical Clearances From Appropriate Authorities, Should Have Experience Of Supplying Such Implants To Other Plastic Surgery Departments Of Repute In India ) 340 Test Kit Heparinase ( Teg ) With 40 Micro Lt. Of Kaolin, Heparinase Cup & Pin. Should Be Usfda Certified 341 Test Kit Kaolin ( Teg ) With 40 Micro Lt. Of Kaolin, Natural Cup & Pin. Should Be Usfda Certified 342 Tetric-N-Bond 343 Tetric-N-Cream Kit 344 Theorexo Coupling Rider / Thorexpo Blade Guide / Xyphoid Blade Compatible With Retractor Systems From Fehling Germany. 345 Thermal Paper For Printing Colposcopy Reports 346 Thermo Trace Core Temperature Sensor Compitable With Drager Neonatal Open Care System Installed In Nicu 347 Thermo Trace Peripheral Temperature Sensor Compitable With Drager Neonatal Open Care System Installed In Nicu 348 Thermometer ( India Make ) 349 Thermometer Disposable Tympanic 350 Thermoplastic Cast Individual Neck Rest For U And S Type. Able To Customize Indidivual Neck Rest For The Patient And To Be Used One Time With Med Tec Carbon Fiber Table Top. 351 Thermoplastic Cast Individual Pediatric Neck Rest For U And S Type. Able To Customize Indidivual Neck Rest For The Patient And To Be Used One Time With Med Tec Carbon Fiber Table Top. 352 Tissue Paper ( Code:01208A ) -Scott Scott Fold M Towel. White Color Uctad Technology Paper Towels. Each Towerl Size=20.57Cms X 31.49 Cms. Each Case Has 25 Packets Of 175 Towels Each=4375 Towels 353 Tooth Mouse 354 Tracheal Tube Guide / Endotracheal Tube Exchanger – Reusable ( Straight Tip ) ( Size 6.5 – 9.0 ) 355 Tracheostomy Button / Decannulation Plug 356 Tracheostomy Tube Cuffed 357 Tracheostomy Tube Uncuffed 358 Transcutaneous Oxygen Tcpo2 Sensor With The Provision Of Free Supply Of 05 Monitors For The Entire Period Of Rate Contract 359 Transducer For High Resolution Manometry System 360 Transfer Bag 1000Ml 361 Transil Tubing ( Silicon ) 362 Trocar Tunelling Stylet- All Size 363 Tubing Set For Scd Pump Sleeves 364 Turp D Set For Surgery Including All Types Of Accessories. 365 Two Pcs Clear Mesh Composite Both Side Polypropylene All Size 366 Two Pcs Umblical Clear Mesh Composite All Size 367 U Bag-Standard ( Made Of Medical Grade Non Toxic, Biocompatible P.V.C. Sheets, Two Layered, Laminated Pvc Sheet To Avoid Any Leakage / Seapage, Providing Hanging & Carrying Systems ) 368 Ultrasound Transducers Water Balloon 369 Umbilical Double Lumen Catheter, Polyurethane All Sizes ( French ) , All Lengths 370 Uretheral Stent -Siliastic 6F, 8F & 10F Without Balloon Catheter Used In Padiatric Urethroplasty 371 Urethral Splint : 6, 8, 10, 12, 14 F 372 Urinal – Autoclavable 373 Urine Pot With Measure Plastic ( Female ) 374 Urine Measuring Jar Of 2 Lit. 375 Urine Pot With Measure Plastic ( Male ) 376 Urine Sample Collection Bag With Sticker ( Paed ) 377 Uro Dynamic Catheter Double Lumen 5F 378 Urosticks 379 Uternie Evacuation Kit Double Valve Aspirators To Generate A Vacuum Equivalent To That Of Eva, Should Be Steam Auto Clavable At 121 Degree Celsius ( 250 Degree F ) For 30 Minutes, It Should Be 610-660 Mm ( 24-26 In ) Hg Vacuum Is Comparable To Eva, Usfda Approved. 380 V Sheet ( Standard ) - B75:B93 – 2 ( Impermeable Water Proof Soft Fabric ) 381 Vascular Aomniquette 382 Video Eeg Consumables; Such As Leads, Electrodes, Compatible With Natus 383 Video Laryngoscope Blades 384 Water Perfusion Anorectal Manometry Catheter Compatible With Kangaroo Geff System ( Rmh, Australia ) 385 Water Perfusion Esophageal Manometry Catheter Compatible With Kangaroo Geff System ( Rmh, Australia ) 386 Wet Cleaning Paper ( Strong Absorption Ability, Economical And For Industrial Use ) - All Standard Sizes, With The Provision To Supply 100 Mop Pad And Handle Free Of Cost ( Provide All Details Of Gsm And Type Of Fabric ) – Green, Orange, Yellow And Blue 387 Wet System Flat Mops 388 Y Connector Of Shunt System 389 Three Way Plain Lipid: For Inward And Outward Direction Of Drug, With Minimal Residual Volume For Drug Delivery, With Pressure Handling Capacity. 390 Three Lipid 10 Cm Cetension : 3 Way Extension For Durg Delivery With Minimal Residual Volume, Prevents Movement Of Iv Cannula And Reduces Infections Related To Phlebitis. 391 Three Way 100 Cm Extension : 3 Way Extension For Drug Delivery With Minimal Residual Volume, Prevents Movement Of Iv Cannula And Infections Related To Phlebitis. 392 Surefuser : Continuous Infusion Elastomeric Pump With Self-Venting 0.2 Micron Filter & Accurancy Of Drug Infusion By Flow Regulator-Calibrated At Skin Temperature. 393 Carbon Steel Sterile Surgical Blade Made Of High Quality Swiss Blade Isi And Ce Approved All Sizes. 394 Stainless Stell Sterile Disposable Scalpel Made Of High Quality Swiss Steel Blade Isi And Ce Approved All Sizes 395 Full Face Shields : The Full-Length Visor With A Warp-Around Design, Provides Front And Side Protection For The Face And Eyes. Light Weight Design With Foam Headband For A Comfortable Fit Coated With Anti-Fog And Anti-Glare Technology Optical Class 1 Refractive Power. Designed To Meet En And Iso Standard. ( A ) Protection Against Droplets And Splashes Of Liquid, En 168:2001 ( B ) Resistance Of Fogging Of Oculars, En 168:2001 ( C ) Resistance To Lgnition, En 168:2001 ( D ) Quality Of Materials And Surface, En 167:2001 ( E ) Refractive Powers: Optical Class 1, En 167:2001 ( F ) Transmittance ( Without Filtering Action ) , En 167:2001 396 Tunnelled Drug Delivery System With 3 Noble Metal Coating ( All Sizes ) 397 Respiratory Distress Support Tube With 3 Noble Metal Coating ( All Sizes ) 398 Respiratory Distress Support Tube With 3 Noble Metal Coating Along Draw Tube ( All Size ) 399 Sharp Pads: Made Of Antistatic Material To Seal The Sharps In Place, Sterile, Ce Approved 400 Sterile Absorbent Perforated Cloth Sheets For Blood Absorption For Plastic Surgery In Accordance Astm Standards & Ce. 401 Disposable Plastic Surgery Drape With Complete Patient Drape, Mayo Stand Cover, Table Cover Etc. With High Fluid Absorption Smms Material. 402 System Should Have Filtration System Along With Rotating Patient Access Valve Enable Complete Isolation, System Should Have 03 Micron Hydrophobic Filter For Immediate Visual Identification Of Ch Size And Flushing Port Which Should Swivels 360 Degrees And Should Be Equipped With Built-In Non-Return Valve, With Disconnecting Ring. Convenient Knob. 403 Hemoseal Pump For Injecting Prefilled Fibro Protein Endoscopically. Should Have Attachment For Connecting Pump With Hemoseal Probe And It Should Compatible With Hemoseal Powder Device. 404 Air Cast Of Low And High Profile 405 Perforator With Burr Compatible To Medtronics / Ausculap And Hand Held Hudson Brace 406 Drill Oil 407 Needle With Safety Shiled 21G, 23G, 25G, 27G, 408 Closed Iv System With Two Spilit Septum Close Port Extension Line, Needle Stick Injury Prevention Feature 18G, 20G, 22G, 24G, 409 Needle Line Multilumen Catheter 7Fr X 16Cm With All Insertion Companents Iso And Qms Certified 410 Polythane Catheter Kit Double Lumen 11.5Fr X 13.5Cm With 150 And Qms Certificate 411 Radiopoque Cuffed Catheter 14.5 Fr X 24 Cm ( Equivalent To 19 X 36 Cm ) With Value Retoble Sheath & With Iso And Qms Certificate. 412 Hfnc For Effective High Flow Oxygen Therapy. Have Contoured Soft Nasal Silicon Prongs, Universal Swivel Connector Is Iso 5356-1:2015 Compliant Comaptible With All Heated Breathing System. Smooth Bore Tubing Gives Reduced Risk Of Oxygen Delivery Tube Twisting With Patient Movement. Secure Connections & Positioning With Adh=Justable Tube Holder & Crocodile Clip Providing Extra Support. Delivery Of Higher Flow Rates Upto 60 L / Min Without Increasing Resistance. Split Head Strap Design. Tubing & Cannula Are Colourless To Aid Visual Inspection Of Device. Colour Coded To Indicate Sizing. Mri Safe Latex & Dehp Free, Ce & Fda Certified. Sizes Are Small, Medium & Large. 413 Neonatal Dual Heated Wire With Chamber Kit 1 ( Additional Components - Y-Piece With Suction Port, 0.3M Incubator Extension, Corrugated Expiratory Limb, 8M / 8F Ported T-Pieces, 22M / 22M, 15F Connector, 8M / 15M Connector, Adapter Tube, 22F / 22M Elbow, 9-11F / 22M, 15F Connectors, 10M, 8F / 15M, 11F Connectors, 15F / 22F Heated Wire Adapter, Auto-Fill Chamber, Detachable Pressure Line, 0.15Mlimb 9-11F / 9-11F, 0.6M Limb 22F / 22F, 0.6M Limb 15M, 11F / 22F ) Ce & Fda Approved. 414 Combined Bite Block And Detachable Dual Nasal Cannula, Both With O2 Delivery And Co2 Sampling, For Use Throughout Upper Endoscopy Procedures And Recovery. It Improves Patient Safety. The Comfort Rest Bite Block Fits Securely In The Mouth Protecting Both Endoscope & Patients Teeth. Simultaneous Provides Oral And Nasal O2 Delivery & Co2 Sampling For Patients Undergone Upper Gi Endoscopy, In Either A Lateral Or Supine Position. 415 Single Use Resuscitator T Piece Circuit For Manually Controlled Ventilation And Resuscitation Of Neonates And Infants. Adjustible Pressures To Meet The Unique Ventilatory Requirements Of Each Patient. Precise Peep Levels Without Frift During Usage. Consistent Care Ensuring Each Breath Is Delivered In A Similar Amnner. It Requires Less Gas Flow To Opearte, For Less Gas Consumed And Improved Transport Range. Ce & Fda Approved. 416 Fibre Optic Reusable Blades For Laryngoscope With Bright, White Led Light Delivers A True Visualisation Of Larynx And Tissue Structures. It Provides Optimal Light Transfer Without Heat, Reducing Risk Of Thermal Damage & Maximising View Of Larynx. Made From High Quality Stainless Steel. Type Of Blades Are : A ) Mccoy Blades Has A Hinged Tip Operated By Lever Mechanism, Elevates The Epiglottis While Reducing Amount Of Force Required. Used For Difficult Intubations. Sizes Are 3, 4. B ) Miller Blades Have Shallow Curved Tip Provides Greater Control In Patients Used In Infant & Neonates With Delivery Port To Provide Supplementary Oxygen During Laryngoscopy. Sizes Are 00, 0 , 1. C ) Macintosh Blades Have Curved Design That Allows The Tip To Be Guided To Epiglottic Vallecula For Direct Visualisation Of The Glottis. Sizes Are 1, 2, 3 , 4. 417 Fibre Optic Reusable Handle For Laryngoscope Is Energy Efficient As Led Bulb Uses Less Power From The Batteries Than Conventional Halogen Or Krypton Bulbs, Reducing Frequent Battery Replacement. Green System Identification The Green Band Signifies That Handle Conforms To En Iso 7376:2009 And Is Compatible With All Fibre Optic Blade Systems 418 Adult Single Limb Bipap Smoothbore Tubing ( 1.8M ) For Bipap / Cpap. Exhalation Valve With Pressure Line, 22M / 22M, 15F Connector. 419 The Nebuliser Compressor Is A Simple And Convenient Nebuliser System For Both Hospital And Home. Low Noise Output, Minimising Ambient Noise Level And Reducing Irritation To The User. The Rocker Switch Allows Patients With Reduced Dexterity To Easily Operate The Compressor. Light Weight With An Integrated Handle For Easy Carriage. Requires Minimal Space For Storage. The Condition Of The Filter Is Easily Seen Without Removal, And The Filter Cassette Is Simply Exchanged When Required. 420 Machine End Bvf Filter With Secure Luer Lock. The Easy To Operate Push Tethered Luer Lock Cap Is Secured With A Strap, Eliminating The Risk Misplacement Or Accidental Loss. Reduced Risk Of Pressure Marks. The Rounded Edges Of The Filter Housing Reduces The Risk Of Leaving Pressure Marks Patients. Available As A Sterile Packed Product For Additional Reassurance. Efficiency: 99.99999% 421 Ventilator Breathing System Adult 1.6M Limb+Adult Hme+Cath Mount. 422 High Flow Nasal Cannula ( Hfnc ) Offer Many Advantages When Used Conjunction With Humidification, Including Accurate Delivery Of High Fio2 And Optimised Mucociliary Clearance, While Increasing Alveoli Recruitment In Technique That Offers Improved Patient Comfort And Compliance. Secure And Comfortable Fitting Without The Need For A Head Or Neck Strap. Use The Sizing Guide To Select The Appropriate Cannula Size, Ensuring Best Fit And Minimising Potential Waste. Star Lumen Tubing Ensures The Flow Of Oxygen Is Maintained Even If The Tube Becomes Kinked. Adaptor Provides A Secure Connection To Both 22Mm And 15Mm Respiratory Limbs. Individual Colour-Coded Range Of Cannula Sizes Provides An Excellent Match To Needs. Sizes Available Premature, Neonate, Infant, Intermediate Infant, Paediatric, Small Adult & Adult With Flow Rate From 8 Lpm To 40 Lpm. 423 Pocket Resuscitation Mask Have Durable Carry Case. Protects The Mask Until Required – Easy Open Release Catch To Minimise Any Delay. Port For Delivery Of Supplemental Oxygen. Avoids The Need To Change Mask During Transportation. Non Return Valve Prevents Vomit Or Other Body Fluids Reaching The User, But Allows Exhaled Breath To Escape. Universal Designed To Be Used On Adults Or Children. 424 Mapleson C Bagging System ( 1.6M ) 10Mm Lightweight Corrugated Tube With 2L Reservoir Bag And Adult Apl Valve + 15F / 6-9Mm Adaptor. Adult Or Paediatric Apl Valve. 2 Litre Adult Reservoir Bag Or 0.5 Litre Paediatric Reservoir Bag. 10Mm, Lightweight, Kink Resistant Tubing. Latex Free Material & Do Not Contain Phthalate Dehp 425 Iv Cap Disinfectant Cap Having Passive Disinfection To Protect Hubs / Ports By Acting As A Physical Barrier To Contamination Between Accesses. Size Medium 426 Chest Tube Holder With Silicon Fixing Plate & Lock Sets. High Absorption Around The Drainage Catheter Prevents The Infection Caused By The Accumulation Of Seepage. 427 Et Tube Holder Pediatric With Flexible Channel With Dual Locking System For Holding The Et Tube Sizes Between 3.0-5.0 I.D 428 Limb Holder Immobilizer With 150Cm Long Strap With An Integrated Grip For Attaching. 49 429 Pure Link Iv Bag & Bottle Spike With Hydrophobic & Antibacterial Filter To Prevent Contamination Of Solutions. 430 Catheter Securement Device With Shape Memory Technology. 431 Feeding Tube Attachment Device Have Unique Clamping Mechanism & Attached Skin Barrier For Ng Tube, Size 5-18 Fg. 432 Pure Silicon, Self Adhesive, Kinkfree ( Cv Sheath ) Male Condom Catheter 433 Ptfe Vascular Bypass Graft Size Are 30 Cms Long And 6Mm In Diameter 434 Ptfe Vascular Bypass Graft Size Are 60 Cms Long And 6Mm In Diameter 435 Hook Electrodes For Cranial Nerve Monitoring Of Intraoperative Monitoring Consumables. 436 Monopoles Suction Electrodes Of Intraoperative Monitoring Consumables 437 Strip Electrodes Of Sizes - 1X8, 5X4, 5X2, 2X8, 2X4 Of Intraoperative Monitoring Consumables 438 Dual Heated Neonatal Ventilator Circuit With Humidifier Chamber 439 Heated Humidified High Flow Nasal Cannula Xs Size Compatible With Airvo2 Hhfnc System 440 Heated Humidified High Flow Nasal Cannula S Size Compatible With Airvo2 Hhfnc System 441 Heated Humidified High Flow Nasal Cannula M Size Compatible With Airvo2 Hhfnc System 442 Heated Humidified High Flow Nasal Cannula L Size Compatible With Airvo2 Hhfnc System 443 Heated Humidified High Flow Nasal Circuit Compatible With Airvo2 Hhfnc System 444 Ventricular External Drainage System 445 Lumber External Drainage System 446 Uro-Gynaecological Prosthetic System Composed Of Macroporous Polypropylene Monofilament Sling With Protective Sheath And When Required Stainless Steel Intruducer Needles. 447 Trans Femoral System Knee Joint. Dynamic Response Foot With Suction Socket. Complete With Cosmetic Finishing And Socket & Service Charge. Features: 1. Made Out Of Carbon Fibre Material. 2. 140 Degree Of Knee Flexion. 3. Pneumatic Swing Phase Control. 4. Multi-Axil Function Of Foot. 5. Adjustable Carbon Fibre Toe Spring. 6. Suction Socket Suspension. 7. Natural Cosmetic Finishing. A. Carbon Material For Low Weight Of Prosthesis. B. Pneumatic Swing Phase Control For Better Adaption Of Prosthesis C. Adjustable Swing For Better Knee Flexion And Extension. D. Geometrical Locking To Prevent Accidental Fall. E. Some Range Of Foot Movements ( Dorsi And Planter Flexion ) F. Shock Absorption Of In The Foot 448 Shoe Cover All Types ( In Pair ) Polypropylene, Length Should Reach Knee In A 6 Feet Person, Upper Elastic Should Be Strong And Not Slip Down ) 449 Air Walker High, Medium, Low Profile 450 Microscope Drape – It Should Be Compatible With Neurosurgery Operating Microscope ( Carl Zeiss And Leica ) , Drape Compensation For Easy Intraoperative Usage With Vision Guard And Of Very High Quality. 451 Full Core Soft Tissue Biopsy Needle Full Core 16 G, 18 G Biopsy Instrument With Tri-Axial Core Cut And Capture System. Variable Throw Length Of 13 Mm ( 9 Mm Specimen ) , 23 Mm ( 19 Mm Specimen ) , 33 Mm ( 29 Mm Specimen ) Instrument Should Have Safety Locking Of Device, Centimetre Markings For Accurate Depth Placement And Trigger Mechanism. Easy Specimen Retrieval Mechanism Which Should Expel The Sample When Device Is Recocked. Co-Axial Introducer Needle Should Be Available Separately. 452 Variable Core Length Biopsy Needle Variable Throw Length Of 13 Mm ( 9 Mm Specimen ) , 23 Mm ( 19 Mm Specimen ) , 33 Mm ( 29 Mm Specimen ) . Instrument Should Have Safety Locking Of Device, Centrimetre Markings For Accurate Depth Placement And Trigger Mechanism. Easy Specimen Retrieval Mechanism Which Should Expel The Sample When Device Is Recocked. Co Axial Introducer Needle Should Be Available Separately. 453 Three Loop Vasscular Snare For Large Vessel Should Come The Salf Sizing 3 Multiple, Independent Loops With Platinum Strands For Excellent Fluoroscopic Visualization. Should Come With Snare On Shaft, 6 / 7 Fr Delivery Catheter, Introducer & Torque Handle Device. The Snare Be Available In Loop Dia Of 6-10 Mm, 9-15 Mm, 12-20 Mm, 18-30 Mm & 27-45 Mm Sizes 454 Over The Wire Retrivable Inferior Venacava Filter Temporary Or Permanent Retrievable Ivc Filter With Single-Piece Design With No Welded Parts. For Placement In Cava 28-30 Mm Diameter. Low Profile Delivery System With 6.5 Fr. Od / 5Fr Id. 70 Cm Delivery Sheath For Jugalar Of Femoral Palcements. Should Also Be Availiavble In 100Cm Delivery Shealth For Antecbiltal Of Popliteal Placements. 455 Liver Access And Biopsy Set Should Include 18G Of 19G Biopsy Needle ( 20 Mm Throw With 17Mm Sample Notch ) . 7Fr. Introducer Sheath With A Curved Metal Stiffner. 4 No. Tissue Removal Swabs. 456 Rotattional Cot Buster Devices All Size, Single Piece Rotational Throm Bectomy Device For Mechanical Declotting & Infusion Of Thrombolytics In Peripheral Vasculars. S-Shape Wire To Create A Sinusoidal Wave In The Lumen Of The Vessel, Powered By A 4000Rpm In-Built Battery Operated Motor In Device Handle Itself. Guidewire -Like Design Should Have 15Mm Sinusoidal Wire Amplitude For Removal, Of Wall Adherent Thrombus In Large Lumens. Low Profile 7Fr Shft With 65 Cm And 135Cm Length Options. In Built 3 Way Side -Port And Distal Side Hole For Infusion. 457 Vascular Drape All Sizes, High Performance Absorbent Material / Total Absorbent Of Body Fluid, Barrier Meterial, Two 2.75X4.75 Cm, Two 5Pin Adhesive Circular Fenestration, Should Be Meant For Biliary And Vascualar Procedures.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 74
Uttar Pradesh View Result →
28.
Health and Family Welfare #8781466 Technical Bid
E-Tender For Empanelment Of Nabl Laboratory For Testing Of Drugs, Kit, Chemicals And Reagents And Consumables For Two Years From The Date Of A.O.C. ( 2021-2023 ) By The Deputy Director Of Health Services ( E S ) , Central Medical Stores. , Ac Lens • Material: Pmma • Optic Size: 6.00 Mm • Overall Langth: 12.75 Mm • A-Constant: 114.9 , Accessories Of Durameter Puncture Set With Epimatic Syringe & Peribax Catheter I. Xro Catheter 20G L.90Cm Ii. Easy Lock Connector Iii. 18G Tuohy Needles Iv. 0.22Um Flat Filter V. Epimatic Syringe , Accessories Of Nerve Stimulator N.S Needles With Continuous Plexus And Peripheral Nerve Blocks ( Compatible With Approved Machine ) - Metalic Stylet Allowing Stimulation - Perineural Polyurethane Catheter 25Mm, 35Mm, 50Mm, 100Mm - 10X15 Adhesive Transparent Dressing , Accessories Of Nerve Stimulator ( To Use In O.T ) Cerebral Stimulator –Nerve Stimulator – Alkaline Battery. , Accessories Of Nerve Stimulator ( To Use In O.T ) Cerebral Stimulator –Nerve Stimulator – Cable Wire , Accessories Of Nerve Stimulator ( To Use In O.T ) Cerebral Stimulator –Nerve Stimulator – N.S Needle , Accessories Of Usg - Gel Hypoallergic 250 Ml Container With Nozzle , Act Tube For Act Management For Cpb , Adhesive Tape: Adhesive Tape, Surgical Tape, Breathable And Comfortable Tape, Hypoallergenic & Gentle, Paper Type, Good Adhesive Tape. Size - 5 Cm X 9.14 M , Adhesive Tape: Adhesive Tape, Surgical Tape, Breathable And Comfortable Tape, Hypoallergenic & Gentle, Paper Type, Good Adhesive Tape. Size - 7.5 Cm X 9.14 M , Allen Key : Small, Medium, Large , An Alcohol Free, Liquid No Sting Barrier Film Containingacrylate Terpolymer, Polyphenylmethylsiloxane, Hexamethyldisoloxane And Isooctane Which Dries Quickly To Form A Breathable Transparent Hypoallergenic, Non-Cytotoxic Coating To Protect Damage Or Intact Skin From Friction, Moisture, Shear, Bodily Fluids, Incontinence And Adhesive Trauma. 28Ml Spray / Bottle , An Alcohol Free, Liquid No Sting Barrier Film Containingacrylate Terpolymer, Polyphenylmethylsiloxane, Hexamethyldisoloxane And Isooctane Which Dries Quickly To Form A Breathable Transparent Hypoallergenic, Non-Cytotoxic Coating To Protect Damage Or Intact Skin From Friction, Moisture, Shear, Bodily Fluids, Incontinence And Adhesive Trauma. 1Ml Wipe , Anti Uv Low Compliances Amber Color Polyetheline Extension Tubing System Protecting Against Uva / Uvb / Uvc Rays While Infusion With Air Buble Detection-150Cm / 200Cm. , Antimicrobial Double-Lumen Polyurethane Catheter For Haemodialysis Fully Radiopaque Catheter Introduced By The Seldinger Technique. Flexible Fixation Wings And Polyurethane Extension Tubes With Clamp. Centimetre Graduations From 9Cm From Distal Tip. The Active Ingredient Used In The Expert Technology Is The Silver Ion-Based Antimictobial Agentagion Which Is Incorporated Into The Polyurethane Tubing Of The Catheter. , Aortic Punch Precisely Engineered Scissor Cut Blade. Single Use Aorta / Vein Punch Provided Clean Accurate Incisions For Miocardial Revascularization. Large Finger Ring For Greater Control And Accuracy. Easyly Cuts Through Thick Calcified Tissue. Radiopaque And Latex Safe. , Arterial Blood Gas Sampling Syringe Kit With Air Venting Filter Cap Sizes 1Ml & 3Ml , Asd Delivery Sheath. 7F , B. D. Vac Sterile Disposable , Basic Set – Procedure Pack Contains Essential Items Needed For A Number Of Common Procedures Including Lumber Puncture, Spinal Anaesthesia, Epidural Anaethesia, Liver Biopsy, Paediatric Surgery, Oncology Etc. ( Also Offers Custom Made Service ) I. Tray Ii. Syringe Luerslip Iii. Aperture Drape Iv. Galipot V. Prep Forceps Vi. 4 Ball Swab ( Small ) Vii. 2 Ball Swab ( Large ) Viii. 1 Filter Needles 5 Um Ix. 3 Hypodermic Needles 18G, 21G & 25G X. 1 Outer Wrap 75 X 70 Cm Xi. Absorbent Towel 33 X 38 Cm , Bileaflet Mechanical Prosthetic Mitral / Aortic Valve With Elevated Pivot Guards * Bileaflet & Rotatable * Opening Angle Of 85º And Traveling Arc Of 56º. * Disc Made Of Pyroletic Carbon / Graphite Substrate. * Sewing Ring: Made Of Polyester With Markers For Helping In Suturing. * Vertical Leaflet Exposure = 3.4 Mm For Better Ostia Clearance * Posterior Wall Clearance= 6.6 Mm In Both Anotomical And Anti- Anotomical Positions. * Aortic & Mitral Assorted Sizes. * Us Fda And Ce Approved. , Bioprosthetic Heart Valve For Mitral / Aortic Position * Triple Composite Design Valve. * Sewing Ring Is Made Of Polyester With Markers For Helping In Sutures. * Low Pressure Glutaraldehyde Fixation. * Flexfit Stent Ot Reduce Leaflet Stress. * Mitral Retchating System Failitates Insertion Into Mitral Annules And Avoids Suture Looping. * Low Profile Hieght Of 9 Mm. * Intra & Supra Annulur Implatability * No + 1 Regurgitation * Us Fda / Ce Approved * Sizes Mitral : 25Mm To 33Mm Sizes Aortic : 19Mm To 25Mm , Bipap Mask With Bronchoscopy Port Along With Accessories ( Vented / Non Vented Swivel Connector B.V Filter Tubing ) , Blood Cardioplegia Device - Adult - Heat Exchanger Pleatal Type. Priming Volume Of Heat Exchanger : <30 Ml . Integrated Heat Exchanger With Bubble Trap. Assemble With Class Vi Implant Tested Tubing. High Cooling Eficiency. Eassy Set Up And Priming. Outlet Comnnection 1 / 4 Built In Bridge For Choice Of 100 % Blood And 100 % Cardiopledgia Solution Delivery. , Blood Cardioplegia Device - Paediatric - Heat Exchanger Pleatal Type. Priming Volume Of Heat Exchanger : <30 Ml . Integrated Heat Exchanger With Bubble Trap. Assemble With Class Vi Implant Tested Tubing. High Cooling Eficiency. Eassy Set Up And Priming. Outlet Comnnection 1 / 4 Built In Bridge For Choice Of 100 % Blood And 100 % Cardiopledgia Solution Delivery. , Blower Mister Kit : Comfortable Hand Grip With A 6.5 ( 16.5 Cm ) Malleable Stainless Steel Shaft For Ease Of Positioning Near The Surgical Site.The Soft; Silicon Tip Contains A Plastic Tube Which Carries Saline To The Tip . , Bone Cement 20 Gm Pack : Methyl Methacrylate / Methyl Acrylate Copolymer Blend Sterilised Using Ethylene Oxide Gas.Uses Zirconium As The Radipaque Agent. , Bone Cement 20 Gm Pack With Gentamycin : Methyl Methacrylate / Methyl Acrylate Copolymer Blend Sterilised Using Ethylene Oxide Gas.Uses Zirconium As The Radipaque Agent Gentamycin Loaded. , Bone Cement 40 Gm Pack : Methyl Methacrylate / Methyl Acrylate Copolymer Blend Sterilised Using Ethylene Oxide Gas.Uses Zirconium As The Radipaque Agent. , Bone Cement 40 Gm Pack With Gentamycin : Methyl Methacrylate / Methyl Acrylate Copolymer Blend Sterilised Using Ethylene Oxide Gas.Uses Zirconium As The Radipaque Agent Gentamycin Loaded. , Bone Graft Substitutes With Antibiotics , Bovine Jugular Venous Graft , Boving Tissue Engineered Acellular Pericardial Patch , Box For 25 Glass Slides ( Plastic Made ) , Bridge Dressing For Bridging The Wound Where The Wound Location Is Not Suitable For Dressing Forvac Unit , Bubble Trap ( Adult ) : Polycarbonate, Polyester, Filter Port - 170Um, Blood Port - 3 / 8 ( 9.5Mm ) , Vent Port - Female Luer , Priming Volume - 150Ml, Max.Blood Flow 6.5L / Min. , Bubble Trap ( Paediatric ) : Polycarbonate, Polyester, Filter Port - 170Um, Blood Port - 1 / 4 ( 6.4Mm ) , Vent Port - Female Luer , Priming Volume - 50Ml, Max.Blood Flow 1.6L / Min. , Calandruccio Type Ii Ankle Clamp , Canisterwithgelforvac Unit 300 Ml , Cannula For Cpb-Arterial-18F, 10F, 12F, 14F & 16F ( Straight ) , 20, 22, 24 ( Angled Tip ) , Capsular Tension Ring • Material: Pmma • Normal Size: 12.00 Mm • Compressed Size: 10.00 Mm • Fixation Hook: Both Sides , Cardiac ( Ecg ) Monitor And Defibrillator Biphasic With Internal Cardiac Paddle For Open Heart Surgery , Cardiotomy Reservoir Housing - Polystyrene, Blood Storage Capacity - 3000 Ml To 3500 Ml., Blood Flow Rate - 8 To 10 Liter / Minute, Filter Non-Woven Polypropylene, Max. Rated Negetive Pressure 300 Mm Of Hg. Blood Inlet Port - 3 Nos. 1 / 4, Blood Oulet Port - 3 / 8. Priming Port - Two Different And Two Through Filters, All Provided With Female Luer. , C-Arm Cover 2 Part Materials-Plastic, Sterile Pack, Ready To Use. , Catheter Mount, Collapseble Catheter Mount With Bronchoscopy And Suction Port , Cdc Guided Peripheral Iv Securement Device With Component: 1 No 2% Chlorohexidine Gluconate & 70% Isopropyl Alcohol Wipe As Per Cdc Recommendations, 1 No Sterile Gauze Piece, 1 No Latex Free Synthetic Poly-Isoprene Based Texture Surface Material Of Tourniquet, 1 No Transparent Semi Permeable Polyurethane Film With Reinforcement Of Waterproof Soft Cloth  And Pattern Coated Adhesive For Higher Sweat Transfer Rates Dressing. Size - 7 Cm X 8.5 Cm , Cemented Bipolar Hip Prosthesis, Size 37 To 51 , Cemented Thr System Acetabular Cup Size 40 To 62, Stem Base Diameter 4Mm To 8Mm, Total Instruments Set For Thr System , Central Venous Line : Thermosensitive Polyurethane Catheter With Lumen Size 20G / 22G / 22G Size- 5Fr. Triple Lumen, Length-8 / 13 Cm With Nitinol Guide Wire Dilator, Ecg Lead & Sutureless Fixation Device. , Central Venous Line : Thermosensitive Polyurethane Catheter With Lumen Size 22G Size- 4Fr. Double Lumen, Length-8 / 13 Cm With Nitinol Guide Wire, Dilator, Ecg Lead & Sutureless Fixation Device. , Central Venous Line : Thermosensitive Polyurethane Catheter With Nitinol Guide Wire With Dilator, ( Preferred Lumen Size 16G / 18G / 18G Size-7Fr. Triple Lumen, Length- 15 / 20 Cm, Ecg Lead , Central Venous Line : Thermosensitive Polyurethane Catheter With Nitinol Guide Wire With Dilator, Double Lumen. Size- 7Fr. Length 15 / 20 Cm, Ecg Lead , Cervical Spine Locking Plate , Charnley Compression Clamp , Close Suction With Non Returnable Valve And Terbojet Clining System. , Closed Intra -Venous And Intra-Arterial Blood  Sampling System, Along With Two Pressure Transducer With Flush Device & Vent Stopcock, Iv Set , 2 Shutoff  Valve, 87” Patient Pressure Tubing Along With Inbuilt Inline 12 Cc Reservoir & 2 Self-Sealing Z-Site For Closed Blood Sampling Port, Pole Mountable , Combined Spinal Epidural Anaesthesia Kit - 16G / 18G. It Should Be Needle Through Needle Technique Andhave Locking Mechanism For Securing Spinal Needle. Both Needles Should Have Mm Graduation Markings At The Hub. Spinal Needle Should Have Whitacre Bevel And Allow 360 Degree Rotation For Spread Of Drugs. , Combined Spinal Epidural System : 1. Should Have Tuohy Needle Of 80Mm Length And 10Mm Graduations With Internal Stylet And Optional Snap On Wings. 2. Should Contain A Pencil Point Spinal Needle Of 115-118 Mm Length With Internal Stylet. 3. Should Have A 10Ml Epirural Loss Of Resistance Syringe. 4. Should Have An Epidural Catheter With A Smooth Closed Tip, Distal Tip Mark. 5. Should Have A Catheter Connector With A Flat Profile For Increased Patient Compfort. 6. Should Have A Flat Filter With A 0.22Μm Hydrophilic Supported Membrance That Allows Two Way Filtration. , Connector - Straight Assorted Sizes - Pvc Material, Sterile Pack , Coronary Shunts Assorted Size : Bevelled Ultra-Soft Tip , Obstruction -Free Flow Path , Large Atraumatic Sealing Surface & Flexible Shaft. , Corrugated Rubber Sheath Drain , Cuff Manometer ( Cuff Inflator Pressure Gauge ) : 1. Allows Controlled Initial Cuff Inflation. 2. Intermittend Pressure Monitoring Facility. 3. Instant Visual Confirmation Of Intra-Cuff Pressure. 4. Simple Operation Of Pressure Adjustment Without Need For Disconnection Or Introduction Of Syringe Into System. 5. Solid Green Zone Indicates Ususal Cuff Pressure Range For Tracheal & Tracheostomy Tubes. 6. Connecting Tube Is Supplied With The Gauge For Convenient Positioning. 7. Portable Gauge And Clips Easily Into Pock. , Custom Pack For Membrane Oxygenator ( Neonatal ) - Class Vi Implanted Tubing. Non-Kinking Transparent Clear Tubing. Should Be Clear And Colour Strip. Component Include Gas Line Filter. Pre By Pass Filter. , Custom Pack For Membrane Oxygenator ( Paediatric ) - Class Vi Implanted Tubing. Non-Kinking Transparent Clear Tubing. Should Be Clear And Colour Strip. Component Include Gas Line Filter. Pre By Pass Filter. , Cvc 3 Fr. With Anti Kinking Nitnol Guide Wire ( Paediatric ) - 6Cm / 10Cm * 3Fr. Thermosensitive Polyurethane Double Lumen Paediatric Cvc. * It Has Anti Kinking Nitnol Guide Wire , Cvc 7.5 Fr.With Anti Kinking Nitnol Guide Wire ( Adult ) - 14G / 18G / 18G-15Cm* 7.5Fr. Thermosensitive Polyurethane Triple Lumen.Adult Cvc* It Has Anti Kinking Nitnol Guide Wire & Blood Less Device. , Cvc 7.5 Fr. With Anti Kinking Nitnol Guide Wire ( Adult ) - 14G / 18G / 18G-16Cm * 7.5Fr. Thermosensitive Polyurethane Rifampicin & Miconazole Integrated Triple Lumen Adult Cvc. * It Has Anti Kinking Nitnol Guide Wire. , Cvc 9.5 Fr., Silver Ion Impregnated Thermosensitive Polyurethane Penta Lumen Adult Cvc With Anti Kinking Nitinol Guide Wire. Size - 14 G / 16 G / 18 G / 18 G / 18 G , Cvc Catheter Fixation Device - ( Epidural, Cvc, Arterial ) * Infection Free Painless Suture Less Catheter Fixation Device. , Cvc Catheter Four Lumen - 14G / 16G / 18G / 18G * 8.5 Fr. 4 Lumen Thermosensitive Polyurethane Adult Cvc . , Cvc Pediatric Set Oximetry Catheter Of Size - 5.5 Fr. Having Optical Cable To Monitor Scvo2 With Cco Monitor For Neonatal And Pediatric Patients. , Cvc Pediatric Set Oximetry Catheter Of Size - 7.5 Fr. Having Optical Cable To Monitor Scvo2 With Cco Monitor For Neonatal And Pediatric Patients. , Cvc Pediatric Set Oximetry Catheter Of Size- 5.5 Fr , Cvp Transducer : Integrated Unit For Clinical Accuracy. Dual Mode Of Flushing Controlled Squeeze And Snap-Tab. Completely Transparent For Easy Priming And Debubbling With Flushing Of 3 Cc / Hr Or Without Flush. Easy Zeroing. Standard Closed Loop Sampling Kit / Double. , Cvp Transducer Compatible With Arterial Pulse Contour Monitor ( Disposable Single Use ) , Cvp / Ibp Transducer Clamp ( Reusable ) , Cvp / Ibp Transducer Holder ( Reusable ) , Dark Goggles ( Adult Size ) With Side Covering , Dark Goggles ( Paediatric Size ) With Side Covering , Denham Pin , Diathermy Pad Foam And Woven Backing Material Bipolar Model. Upright And Horizontal Shape. The Patent Shape Outline Design Make The Adhearence To Be More Close And Comfortable On Body Joint Anf Lift Bones. The Conductive Gel Covers Over The Edge Of Metal Foil. It Can Avoid The Burned Hurt Which Because By The Connection Of Metal Foil And Skin. , Disposable Cap , Disposable Combitube, Size - 3, 4 , Disposable Convective Warming Blanket, Should Have Wide Range Of Disposable Blankets For Variety Of Patient Sizes And Positions. *Blankets Must Have 2 Layers Of Non-Woven Polypropylene Fabric Bonded To A Layer Of Polyethylene For Durability And To Prevent Tearing And Puncturing. , Disposable Fluid Warmer Tubing, * Blood And Iv Fluid Warmer Set With Injection Port. , Disposable Gowns , Disposable Hme Filter : Disposable Hme Filter, Resistance To Flow 60 Il / Min-2.0 Cm H2o, Desirable: Bacterial Viral Filteration Efficiency More Than 95% , Disposable Neonatal Blood Exchange Set With Accessories , Disposable Sterile Full Gown With Eye Protection Sterile Disposable Prepackaged , Disposable Suction Pod Stabilisation System For Cabg, The Pod Should Rotate 3600 , Disposable Vaccum System For Positioning Heart For Cabg , Disposable Ventilator Circuit With Water Trap. Should Be Tidel Volume Range From 200 Ml To 1500 Ml. Should Be Minimal Deade Space 55 Ml. Medical Grade Pe. Connector 15 / 22 Mm M / F For Y Piece, Connector 15 / 22 Mm M / F For Ett & Mask. Standard Length . 6Ft. Or Expandable Length. , Disposable Ventilator Heated Wire Circuit With Water Trap. Should Be Tidel Volume Range From 200 Ml To 1500 Ml. Should Be Minimal Deade Space 55 Ml. Medical Grade Pe. Connector 15 / 22 Mm M / F For Y Piece, Connector 15 / 22 Mm M / F For Ett & Mask. Standard Length . 6Ft. Or Expandable Length. , Distal Humeral Anatomical Locking Plate , Distal Humeral Extra – Articular Combihole Plate , Distractor 6, 8 & 10 , Dome Kit With Flushing System. • Should Be Single Line Monitoring Dome. • Should Be Measure Invasive Pressure. , Drill Bit ( S.S ) Sizes : 2 Mm, 2.7 Mm, 3.5Mm, 4.5 Mm , Ecmo Disposable Kit For Adult , Ecmo Disposable Kit For Pediatric , Eco Bath, Disinfection Wet Pack With 2% Cholorhexadine , Elbow Arthoplasty Semi Constrained Or Equivalent Design All Metal Hinge Section Humeral And Ulnar Stem With Screws For Joining The Stems. Total Instrument Set For Elbow Arthroplasty , Endoluminalballoon Occluder For Mics , Endomyocardial Biopsy - Bioptome , Endoscopic Vein Harvester For Cabg , Epidural Catheterization Full Set - 16G / 18G With Catheter Fixation Device And Click Lock Connector , Et Connector : Connector With Bronchoscopy Port For Endotracheal Tube / Tracheostomy Tube , Et Connector With Catheter Mount: Connector With Bronchoscopy Port For Endotracheal Tube / Tracheostomy Tube , Et Tube Holder With Bite Blocker , Extension Lines In Spirally Coiled Form In Polythelene Protects The Patient, Catheter And Infusion Equipment From Stress Caused By Pulling And Tugging. Provides Freedom Of Movement During Early Mobilisation, Removes Lines From Floor Level. L-100 / 150 / 200 Cm , Eye Drape • Sheet Size: 80 X 75 Cm - 90 X 75 Cm • Adhesive Area: 9 X 7 Cm With 6 Eye Lid Holders • Drainage Pouch Of Transparent Pe Film • Eto ( Eo ) Sterile , Eye Pad • Gauze Or Nonwoven Covered Outside, Cotton Inside. • Size: Standard Size In Oval Shape To Cover The Eye. • Individual Pack In Sterile Packaging, Eto ( Eo ) Sterile Eye Pad. • With And Without Adhesive Cover. , Face Mask 2 Layer, Disposable With Nasal Bridge , Femoral Arterial - 16F, 18F, 20F & 22F ( Straight ) , Femoral Arterial & Venous Cannual For Mics ( Percutaneous ) , Femoral Venous - 17F, 19F, 21F & 23F , Filter For Blood Transfusion : Reduced Priming Volume:35 Ml , High Filtering Flow Rates For Amounts Of Whole Blood Up To 2000 Ml , Easy Debubbling , High Filtering Efficiency: Microaggregate Removal> 25 I-Im: 95% ( Micro 20 ) & Microaggregate Removal> 40 I-Im: 95% ( Micro 40 ) , Maximum Working Pressure : 400 Mmhg , Poluster Monofilament Screen Filte. , Flexible Annuloplasty Ring - Assorted Sizes, Completeor Open Ring. Large Target Area Eases Suturing, Suitable For Implant Using Open Sternotomy, Minimally Invasive And Robotic Approaches. , Fluorescein Sodium Ophthalmic Strips • Sterile Diagnostic Strips For External Use. • Each Strip Is Impregnated With 0.6 Mg Of Fluorescein Sodium. , Foldable Lens ( Phaco ) Of Different Iol Powers: + 1 D To + 25 D • Single Piece Foldable Lens • Material Is Uv Block Incorporated Ensuring Adequate Uv Protection • Optics Are Yag Laser Friendly • Non-Lonic Nature Of Materials Ensures Resistance To Deposits Thus Lowering The Incidence Of Pco • Material: Acrylic Hydrophobic • Optic Type: Biconvex • A-Constant: 118.0 / 118.5 • Optic Size: 5.5 Mm / 6.0 Mm • Overall Langth: 12.5 Mm , Foldable Lens ( Phaco ) • Single Piece Foldable Lens • Material Is Uv Block Incorporated Ensuring Adequate Uv Protection • Optics Are Yag Laser Friendly • Non-Lonic Nature Of Materials Ensures Resistance To Deposits Thus Lowering The Incidence Of Pco • Material: Acrylic Hydrophilic • Optic Type: Biconvex • A-Constant: 118.0 • Optic Size: 6.0 Mm • Overall Langth: 12.5 Mm , Gauze, Sterilized In Pkts. Size: 10 Cm X 10 Cm X 12 Ply , Guided Intubation Set For Difficult Intubation, Semi Reusable, Improves C-L Grade When The Battery Is Fully Charged The Optics Can Be Used For Approximately 50 Intubations. Disposable Blade And Eyecup Fully Protects Optics From Patient Contact. Quick And Easy Assembly With Optics. Include Lenses At The Distal End Of Blade And Also In Eyecup. Docking Station ( A-590 ) Recharges The Battery. Displays The Remaining Number Of Uses Of The Optics. Camera For Option 1 & 2 C. Camera ( A-360 ) Characteristics Wireless Image Transmission ( When Used With The Wireless Display Recorder Monitor ) Attachable To Every Model Connectable To Any External Display Or Monitor Which Has An Available Rca ( Radio Corporation Of America Or Phone Connector ) Or Bnc ( Bayonet Neill Concelman Or Barrel Nut Connector ) Video Input Jack. Lightweight , Hand Drill - Closed Gear With Chuck & Key , Hand Drill - Open Gear With Chuck & Key , Hand Switch Pencil For Diathermy. Easy Handling, Light, Comfortable Anatomical Shape, 3 Metters Cabel, 3-Pin Standard Connector For Ref Mb 100 / Mb 200, I-Pin 4Mm. Standard Connector For Ref. Mbsoo, Single Use, Ethylene Oxide Sterilized, Pencils Been Manufactured Under Ansi / Aami Standard Hf18 1.993 For Electrosurgical Devices. , Heat & Moisture Exchange Filter : 1. Hepa Bacterial And Viral Filter With Hme Properties Offering Optimum Hydrophilic Filtration. 2. Gas Sampling Port, For End Tidal Co2 Monitoring. 3. Recommended Tidal Volume Range 150-1200Ml 4. Humidity Output ( Mg H20 Per L ) :25.6 Per 250 / 18.6 Per 500 5. Even-Pleated Filter Medium To Allow Maximum Filtratioin Efficiency With Minimal Resistance To Flow. 6. Low Deadspace, Equal To 45Ml 7. Single Use And Sterile. , Helium Cylinder For Iabp , Herbert Screw 22-50 Mm , Hicon Mask, 100% Recovery Bag Mask With Star Lumen Crush O2 Tubing , Hydropolymer Foam Dressings With Liqualock™ Advanced Absorption Technology European Ce And Dcgi Certified Size- 1 ) 7 Cm X 9 Cm- 2 ) 11 Cm X 11 Cm 3 ) 18X 18 Cm Sacral 4 ) 15 Cmx 15 Cm 5 ) 15 Cm X 20 Cm , Iabp Cable ( Reusable ) For Cco Monitor , Ibp Cable ( Reusable ) , I-Gel All Sizes ( 1, 1.5, 2, 2.5, 3, 4 ) , Infusion Portable Disposable Pump With Pca – Patient Controlled Analgesia 1. Should Have Volume 60, 100, 275 & 450Ml 2. Having Variable Flow Rate Like 0.05, 1.00, 2.00, 4.00 5.00, 8.00, 10.00, 13.00 & 50 Ml / Hr 3. Should Have Lock Out Period Of 5, 6, 8, 10, 15, 30 & 60 Min 4. Should Have Bolus Dose Of 0.05, 1.00 & 2.00 Ml 5. Micro Iv Filters Should Have 1.2Μm Hydrophilic Membranes – Expels Particles. 0.2Μm Hydrophobicmembranes – Expels Air From Infusion Line 6. Should Have Compact Bolus Button. , Instrument Tray E. I. 30 C. M. X 25 C. M. With Cover Stainless Steel Is 3257, Is 3424 , Integrated Closed Iv Catheter System With Pre-Attached High Pressure Extension Set ( Up To 300Psi ) ; With Two Split Septum, Closed System Needle-Less Connectors; Needle Tip Encapsulated In Plastic Cap For Nsi Prevention Sizes: 18G, 20G, 22G & 24G. , Inter Costal Drainage Tubes With Bag ( No. 28, 30, 32 ) , Inter Costal Drain With Trochar No. 10, 12, 14, 16, 18. , Internal Jugular Venous Cannula ( Dual Stage ) , Internal Jugular Venous Cannula ( Single Stage ) 17F, 19F, 21F, 23F & 25F , Intra Abdominal Pressure Monitoring Kit 1. Intra Abdominal Pressure Monitoring Kit With Transducer Compatible 2. With Present Interface Cable Or Without Transducer With Sleeved Syringe. , Intra Cardiac Sucker: Comfortable Hand Grip. The Tip Shaft Is Made From Rigid Stanless Steel . The Macro Sucker Has A Fluted Pool Tip To Maximize Suction And Minimize Tissue Trauma. Micro Sucker 6 In ( 15.2 Cm ) Approx. & Mini Sucker 5 In ( 12.1 Cm ) Approx. , Intubating Stylate – Small, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Intubating Stylet – Large, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Intubating Stylet – Medium, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Jessstandard Size , K Nail -Sizes 6 To 12 Mm Dia. , K.Wires ( Kirshners Wire ) ( S.S ) Size : 1 Mm , 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm , Kidney Tray 15 C.M. S.S. , Kidney Tray 25 C.M. E.I. , Knitted Polyester Fabric Patch, Size – 4” X 4”. *Thickness Should Be - 0.61Mm, *This Metarial Patch Graft, Endarterectomy Procedures And Asd / Vsd Repair. , Large Polyurethane Ester Dressing ( 25 Cm X 15 Cm X 1.6 Cm ) For Npwt Instillation Therapy With Holder Cassette For Topical Solution Andcanister For Exudate Collection, It Should Be Dcgi And Fda & Ce Certified. , Laryngoscope Makintosh With 3 Blades Size - 1, 2, 3 , Laryngoscope Makintosh With 3 Blades Size - 2, 3, 4 , Laryngoscope Makintosh With 4 Blades Size - 2, 3, 4 & Extra Large , Laryngoscope Mc Coy Blade Size - 2, 3, 4 , Leucocyte Depleting Filter , Level Sensor For Perfusion ( Heart Lung Machine ) , Linear Cutter Cum Stapler, Size: 100 Mm , Linear Cutter Cum Stapler, Size: 75Mm / 80Mm , Link Joint : Small, Medium, Large , Lithium Battery 9 Volt , Mechanical Npwt Unitwithpolyurethane Foamdressing 10X 10Cm Andcanister Providingnegative Pressure -75Mmhg To -125 Mmhg.Itshould Be Dcgi And Fda & Ce Certified. , Medium Polyurethane Ester Dressing ( 17 Cm X 15 Cm X 1.8 Cm ) For Npwt Instillation Therapy With Holder Cassette For Topical Solution Andcanister For Exudate Collection, It Should Be Dcgi And Fda & Ce Certified. , Membrane Oxygenator With Coating ( Paediatric ) - Priming Volume Of 135 Ml. Blood Flow Range Up To 4.0 L / Min. Reservoir Capacity Of 3000 Ml; 70 Ml Minimum Operating Lavel. Non Heparin Based Bioppassive Polymer Does Not React With Blood Components. , Micro Drip Set , Mini External Fixation System - A ) Link Joints ( Closed & Open ) B ) Connecting Knurled Rod Of 6 To 14 Length C ) Distractors 6 To 14 D ) Allen Keys Of Different Sizes E ) Z Rod & L Rod , Minitracheotomy 1. Should Have A Guarded Scalpel. 2. Should Have A 16G Beveled Needle 3. Should Have A Flexibe Tipped Guidewire. 4. Should Have A Curved Dilator. 5. Should Have An Introducer. 6. Should Have A Pvc Cannula Of 4.0Mm I.D 7. Should Have A 10F Low Friction Suction Catheter. , Mini-Vacuum Drain Kit With Soft Catheter Pvc Hypoallergenic Puncture Resistant Soft Tubing With Multiple Side Holes. , Moving Front Chemical Indicators To Verify All Parameters Of Steam Sterilisation To Gather I.E. Time, Temperature & Equality Of Steam Read Out Indications After Accept Or Reject Process & Allows To Differentiate All The Parameters , Mox ( Connector ) With Pressure Gauge , Mox-26 Oxygen Pressure Reducing Valve , Mri Conditional Syringe Pump With 10 Hours Battery Back Up ( 1.5 Tesla ) Technical Specification For Syringe Infusion Pump ( Mri Conditioned ) Canbe Used In Static Magnetic Fields Outside 150 Gauss Line When Secured To A Non-Movable Object.Should Be Able To Accept And Automatically Deyect Different Syringe Sizes Ranging From 1 Ml To 60 Ml.Should Be Able To Deliver At Variable Flow Rates Of 0.01Ml / Hr Upto 1130 Ml / Hr.Should Be Able To Programme The Pump According To The Department Needs Through Software.Should Be Able To Adapt The Drug Library Which The Department Can Make And Feed Ton The Pumpincluding The Soft And Hard Limits For Each Drug.Should Have Large Character Capacity Which Can Allow Inputting Drug Names And Concentrations.Should Have Clear Tall Men Lettering Display.Should Be Easy To Use And Also Have Patient Tubing Holder. Should Have Wide Range Of Audio And Visual Alarms To Ensure Clinician Awareness And Prompt Intervention.Should Have Post Occulution Bolus Reduction.Multiple Delivery Mode Combinations Including Ml / Hr, Body Weight, Mass, Volume Over Time, Custom Dilution And Intermittent, Loading Dose, Bolus Dose, Standby, Volume Limit, And Kvo Rate.Design Protects Entire Syringe Barreland Allows Single Handed Loading Of Syringe.Allows Biomed To Set Pm Dates, View Service History And Access Calibration And Diagnostic Testing. , Mucus Sucker , Multiple Clip Applicator - Should Be 20 Titanium Clips Of Different Sizes With Precise Angled Jaws. Anti Drop Rachet. Latteral Transverse Inner Grooves. , N 95 Respirator Without Rebreathing Valve Niosh Certified , Nasel Canula, Siliconised Nasel Prong With Star Lumen Crush Tubing , Nebu T Pc With Mask, Inline Nebulisation Set Pc With Star Lumen Crush O2 Tubing And O2 Mask , Nebulizer T Pc : 1. Complete Kit With T Mouth Pc, Special Chamber With ‘Cc’ Mark 2. 2Cc Medicine Locking System 3. 2Mtr Star Lumen Crush Resistant Oxygen Tubing. , Needleless Access For Injections / Sampling - Closed System For Connections / Disconnections Of All I.V. Infusions And Equipment - Cleanable Membrane For Swabbing Before And After Use. - Simple One-Piece Design Fits All I.V. Luers. No Other Accessories Needed. - Standard Male-Female Luer Locks - Supplied In A Unique Protector For No Touch Connection Of Sterile Bionector. , Negativepressurewoundtherapysystem Withinstillation Of Volumetricdelivery Oftopical Solution.System Should Have2-Pumpstoprovide Npwtandautomateddeliveryoftopical Solutionwith Dynamic Pressurecontrol.System Shouldoperate I.E4 Therapies In1-Unitnpwt, Npwt+I, Open Abdomen Therapy Andsuturelinetherapy. System Should Be Dcgi And Fda & Ce Certified , Neonatal / Infant Resuscitator Set Complete In A Carrying Case ( For Labour Room, Mobile Vans And Paediatric Wards & O.T.S ) , Nitric Oxide Cylinder & Delivery System , Nitrous Oxide Cylinder 5 Lit Wc, A Type Read With Approval From Petroleum And Explosives Safety Organization , Non-Adhering Dressing Is A Primary Dressing Made Of Knitted Cellulose Acetate Mesh, Impregnated With A Specially Formulated Petrolatum Emulsion. Usfda, European Ce Anddcgi Certified. It Should Have Mesh Thatallowsexudate To Pass Easily Through To A Secondary Absorbent Dressing, Preventing Maceration Of The Wound Surface And Minimizing The Risk Of Pooling. Knitted Cellulose Acetate Fabric Allowsdressing To Be Cut To Wound Size Without Unravelling Or Shreddingnon-Adhering Dressing Removes Cleanly From The Wound, Minimizing Trauma And Pain1during Dressing Changes. In Turn, This Reduces The Risk Of Tissue Adherence To Both Dressing And The Secondary Dressing, And Minimizes Patient Pain, European Ce Anddcgi Certified Size - 1 ) 7X7 Cm 2 ) 7.6 X 52 Cm 3 ) 7.6 X40 Cm 4 ) 7.6 X 20 Cm , Non-Invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size -¼” X 3” / 6 Mm X 75 Mm , Non-Invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ¼” X 1½” / 6 Mm X 38 Mm , Non-Invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ¼” X 4” / 6 Mm X 100 Mm , Non-Invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ½” X 4” / 12 Mm X100 Mm , Non-Rebreathing Masks : Non-Rebreathing Masks Adult Size. , Non-Rebreathing Masks : Non-Rebreathing Masks Paediatric Size. Flexible Plastic Mask With Elastic Head Strap, Incorporated Oxygen Reservoir Bag, Oxygen Tubling. Should Be Latex Free For Patent Safety , Npwt Dressing Kits Containing Large Polyurethane Foam Silverdressing ( 26 Cm X 15 Cm X 3.2Cm ) Withdrape, Ruler, Trac Tubing And 1-Ltr Canisterforexudate Collection. Itshould Bedcgi Andfda & Ce Certified. , Npwt Dressing Kits Containing Medium Polyurethane Foam Silverdressing ( 18 X 12.5 X 3.2Cm ) With With Drape, Ruler, Trac Tubingand 1-Ltr Canisterforexudate Collection.Itshould Bedcgi Andfda & Ce Certified. , Npwt Dressing Kits Containing Small Polyurethane Foam Silverdressing ( 10 X 7.5 X 3.2Cm ) With Drape, Ruler, Trac Tubing And1-Ltr Canisterforexudate Collection.Itshould Bedcgi Andfda & Ce Certified. , O2 Recovery Kit For Tracostomy With Separet Valves And Star Lumen Crush Technology O2 Tube , Openabdomennegativepressure System Fortemporary Abdominal Closure Systemcomprises Ofa ) Polyurethane Foamwithpore Size 400-600 Micron B ) Visceralprotective Layer Comprisesofpolyurethane Encapsulated Foam Extensionreach Deepinto Paracolic Gutter C ) Adhesive Drape D ) Interface Pad.Itshould Befda Andeuropean Cecertified. , Opthalmic Microsurgical Full Handle Disposable Knife , Organ Harvesting Box Cardiac Transplatation , Organ Retrival Kit For Cardiac Transplantation
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
West Bengal View Result →
29.
Defence #8623071 AOC
Bids Are Invited For 1 P2.5 INDOOR LED VIDEO WALL (Dimensions: 25.20 ft x 14.17 ft) 1 2 LED VIDEO WALL CONTROLLER 1 3 MEDIA PLAYER 1 4 MS FABRICATION WITH HEAVY DUTY MS PIPES, PLYWOOD, AND ACP CLADDING AND SCAFFOLDING 1 Total Quantity : 21; 1 2 2 2 3 2 4 2 Item & Description 85 440 nits Brightness, Smart Android OS, 4K UHD Resolution, 24*7, Screen Mirroring through Airplay/Chromecast, Direct LED, 16 Gb storage, Wi-Fi, 178 Degree Viewing Angle, Landscape/Portrait/Tilt Installation, IP/RS232C Control, 10W+10W Speakers, HDMI 2.1 (4), USB (2), Power Scheduling, 1200:1 Contrast Ratio, Color Gamut (DCI-P3) 92%, HDMI Auto Wake up. 4K HDR Visual Experience through 4K HDR Processor X1, 4K X-Reality PRO, Triluminos PRO, Motionflow XR, HDR10/HLG/Dolby Vision SITC of self-powered, vented speaker features a 15-inch, 2-way, bi-amp design, delivering a maximum SPL of 138dB. Its operating range spans from 50 Hz to 20 kHz. The speaker has a nominal beamwidth of 90° horizontal by 60° vertical, which is constant directivity and user-rotatable, maintaining a nominal phase of ±15° from an ideal high-pass filter. It includes a 15-inch cone LF transducer with a 3-inch voice coil and a 3-inch voice coil compression driver with a 1.4-inch exit for the HF transducer. The crossover frequency is set at 1 kHz. Signal processing is handled by DSP . The speaker supports main/monitor and mic/line modes, with electronically balanced XLR/TRS inputs and an electronically balanced XLR loop type. It utilizes a Class D amplifier with a peak output of 1500W for both LF and HF. The AC mains connector is an IEC connector, supporting 100-120V or 200-240V at 50-60Hz. SITC of loudspeaker boasts a frequency response range of 55 Hz to 20 kHz, delivering a diverse range of sound. With a maximum sound pressure level (SPL) of 135 dB, it ensures powerful and clear audio projection. Operating in bi-amp LF and HF modes, it utilizes a 12-inch cone with a 2.5-inch voice coil alongside a 1.4-inch voice coil compression driver with a 1-inch exit, ensuring balanced and crisp sound reproduction. Its nominal beamwidth spans 90° horizontally and 60° vertically, offering wide coverage. Capable of handling 1500W of power, its designed for robust performance. The connectivity options include an IEC power connector and XLR input/thru, ensuring seamless integration into various setups. SITC of Self Powred Sub-Woofer with Frequency Response of the VLF (Very Low Frequency) system spans from 27 Hz to 125 Hz, with a Max SPL (Sound Pressure Level) of 133 dB (peak, half space). It operates in a VLF mode.Its subsystem comprises an 18-inch Cone with a 3-inch Voice Coil, vented for optimal performance.With a Nominal Beamwidth of 360° horizontally and vertically, it offers comprehensive coverage.The Power Handling capacity stands at 1500W.For connections, it features an IEC AC Mains Connector for power, XLR Input (L/R), and XLR Thru/Xover options for signal routing. 5 2 6 1 7 2 8 2 SITC of is a compact, portable, and rack-mountable digital mixer with 17 motorized faders, 40 input mixing channels (32 mono, 2 stereo, 2 return), 20 Aux buses, 8 DCA groups, and 8 onboard effects with 10 GEQs. It offers 16 XLR/TRS combo inputs, 2 RCA stereo inputs, 16 XLR outputs, 34×34 USB audio interface, and a 2×2 USB recording/playback option. An expansion slot supports the NY64-D Dante audio interface card. SITC of Digital signal processor with min. 16AEC enabled Mic/Line inputs, 16 Line outputs or better , Input channel processing should include Pre amplifier, Signal generator, Expander, Compressor, 10 band Parametric EQ or better, Output Channel processing should include 31 band Graphic equilizer, Delay, Crossover, limiter or better, Other features should include Automatic mixing console, Ducker, Feedback elimination, Noise elimination, echo elimination or better, Should have built-in Bi directional USB for Software based VC as well as for playing digital audio, Should have built in Camera tracking Module, 16 Port Freely Configurable GPIO or better with Analog/Digital dynamic range of 114dB or better, Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz or better, per channel phantom power module or better. Should be configurable thru software. SITC of Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction semi-rigid shaft with 8mm gooseneck. A reed switch is fitted to allow pop / click free muting of a microphone. The microphone is fitted with a phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The Phantom Power Adaptor includes filters which will eliminate all cellular frequencies (GSM/2G, 3G, 4G & 5G) and is terminated with a male 3 pin XLR. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -40dB +/- 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Shaft diameter: 8mm. Finish: Satin Black. SITC of Loudspeaker has a maximum SPL of 135dB and an operating range from 47 Hz to 20 kHz. It features a nominal beamwidth of 90° conical and is vertically asymmetric (+40, -50). The low-frequency transducer is a 12-inch cone with a vented design, while the high-frequency transducer is a 1-inch exit with a 1.4-inch voice coil compression driver, utilizing a linear conical waveguide. It operates in biamp mode for both low and high frequencies and incorporates DSP with EAW Focusing and DynO signal processing. The modes available are main/monitor and mic/line. The input type is electronically balanced XLR/TRS, and it also has an electronically balanced XLR loop type. The amplifier is a Class D type, with a maximum output of 1500W peak for both low and high frequencies.
Contract Date: Ref. Documents Contract Value : ₹ 1.68 Crore
Government Departments No of Bidders 5
Uttar Pradesh View Result →
30.
Rural Development #8523125 AOC
Tender For Regarding Supply Of Various Type Of Material /Goods At Grampanchayat Sakhali Bk. Taluka Buldhana District Buldhana , Pvc Cement Solvent / Pvc Solution For Pipe Line Work 1 Ltr , Swing Check Type Reflux (Non-Return) Valves For Water Works Purposes , Pvc Pipe 4Kg 75 Mm , Pvc Pipe 4Kg 90 Mm , Pvc Pipe 4Kg 120 Mm , Pvc Pipe 6Kg 75 Mm , Pvc Pipe 6Kg 90 Mm , Pvc Pipe 6Kg 120 Mm , Elbow For Pipe 4Kg 75 Mm , Elbow For Pipe 4Kg 90 Mm , Elbow For Pipe 4Kg 120 Mm , Coupling For Pipe 4Kg 75 Mm , Coupling For Pipe 4Kg 90 Mm , Coupling For Pipe 4Kg 120 Mm , T For Pipe 4Kg 75 Mm , T For Pipe 4Kg 90 Mm , T For Pipe 4Kg 120 Mm , Elbow For Pipe 6Kg 75 Mm , Elbow For Pipe 6Kg 90 Mm , Elbow For Pipe 6Kg 120 Mm , Coupling For Pipe 6Kg 75 Mm , Coupling For Pipe 6Kg 90 Mm , Coupling For Pipe 6Kg 120 Mm , T For Pipe 6Kg 75 Mm , T For Pipe 6Kg 90 Mm , T For Pipe 6Kg 120 Mm , Ferrule Cock 15 Mm (Brass) , Water Meter Single Jet Isi Mark 15 Mm Class B , Water Meter Double Jet Isi Mark 15 Mm Class B , Swiss Valve For 2.5 Pipe Line , Swiss Valve For 3 Pipe Line , Swiss Valve For 4 Pipe Line , Swiss Valve For 6 Pipe Line , Pvc Pipe Cid Joint For 2.5 Pipe Line , Pvc Pipe Cid Joint For 3 Pipe Line , Pvc Pipe Cid Joint For 4 Pipe Line , Pvc Pipe Cid Joint For 6 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 2.5 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 3 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 4 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 6 Pipe Line , Resilient Seated Cast Iron Single Air Relief Valves For Water Works Purposes , Resilient Seated Cast Iron Double Air Relief Valves For Water Works Purposes , Pvc Cement Solvent / Pvc Solution For Pipe Line Work 5 Ltr , U-Pvc Pipe 40 Mm , Elbow For U-Pvc Pipe 40 Mm , Coupling For U-Pvc Pipe 40 Mm , T For U- Pvc Pipe 4Kg 40 Mm , Stainless Steel Long Body Bib Cock Tap With Flange 40 Mm , O-Ring For U-Pvc Pipe 40 Mm Plane , Water Tank 4 Layer Food Grade 100 Ltr , Water Tank 4 Layer Food Grade 200 Ltr , Water Tank 4 Layer Food Grade 250 Ltr , Water Tank 4 Layer Food Grade 500 Ltr , Water Tank 4 Layer Food Grade 1000 Ltr , Water Tank 4 Layer Food Grade 1500 Ltr , Water Tank 4 Layer Food Grade 2000 Ltr , Water Tank 4 Layer Food Grade 2500 Ltr , Water Tank 4 Layer Food Grade 3000 Ltr , Water Tank 4 Layer Food Grade 5000 Ltr , Submersible Motor Pump 1 Hp , Submersible Motor Pump 2 Hp , Submersible Motor Pump 3 Hp , Submersible Motor Pump 3Hp Three Phase , Submersible Motor Pump 7.5Hp 5 Stage Three Phase , Submersible Motor Pump 7.5Hp 8 Stage Three Phase , Submersible Motor Pump 7.5Hp 10 Stage Three Phase , Submersible Motor Pump 7.5Hp 12 Stage Three Phase , Submersible Motor Pump 10.5 Hp 5 Stage Three Phase , Submersible Motor Pump 10.5 Hp 8 Stage Three Phase , Submersible Motor Pump 10.5 Hp 12 Stage Three Phase , Submersible Motor Pump 10.5 Hp 20 Stage Three Phase , Centrifugal Monoblock Pump Motor Pump 1 Hp , Centrifugal Monoblock Pump Motor Pump 2 Hp , Centrifugal Monoblock Pump Motor Pump 3 Hp , Centrifugal Monoblock Pump Motor Pump 3Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 5Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 6.5 Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 7Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 7.5 Hp Three Phase , Isi Mark Starter For 5 Hp Submersible Motor Pump , Isi Mark Starter For 12 Hp Motor Pump , Isi Mark Hdpe Pipe Roll For Sub. Pump In Borewell 50Mm X 4Mm X Per Meter , Isi Mark Submersible Cable Diameter 4 Mm Length Per Meter , Isi Mark Submersible Rope Yellow Borewell Submersible Pump Rope,Poly More Virgin And Braided Twisted Cord Twine Rope String (16 Mm,Per Meter Meter) , Auto Switch For Water Moter Starter Upto 12 Hp , Aluminium Armoured Power Cable-50 Sq Mm 3.5 Core , Clorine Dosing Machine Without Stand By System , Clorine Dosing Machine With Inbuilt Stand By System , 11 Ltr Dustbeen Pvc Without Leads , 15 Ltr Dustbeen Pvc Without Leads , 20 Ltr Dustbeen Pvc Without Leads , 35 Ltr Dustbeen Pvc Without Leads , 11 Ltr Dustbeenpvc With Lead , 15 Ltr Dustbeen Pvc With Lead , 20 Ltr Dustbeen Pvc With Lead , 35 Ltr Dustbeen Pvc With Lead , 11 Ltr Dustbeenpvc Swing Bin , 15 Ltr Dustbeen Pvc Swing Bin , 20 Ltr Dustbeen Pvc Swing Bin , 35 Ltr Dustbeen Pvc Swing Bin , 11 Ltr Dustbeenpvc With Pedal , 15 Ltr Dustbeen Pvc With Pedal , 20 Ltr Dustbeen Pvc With Pedal , 35 Ltr Dustbeen Pvc With Pedal , 20 Ltr Twinbin Pedal , 11 Ltr Dustbeensteel With Pedal , 15 Ltr Dustbeen Steel With Pedal , 20 Ltr Dustbeen Steel With Pedal , 30 Ltr Dustbeen Steel With Pedal , Dustbeen Rabbit Shape 10 Ltr , Dustbeen Rabbit Shape 15 Ltr , Dustbeen Rabbit Shape 20 Ltr , Dust Bin Big Double 110 Ltr Pvc With Stand , Dust Bin Big 110 Ltr Pvc , Dust Bin Big 120 Ltr Pvc , Dust Bin Big 100 Ltr Pvc With Wheel , Dust Bin Big 110 Ltr Pvc , Dust Bin Big 120 Ltr Pvc With Wheel , Dust Bin Big 240 Ltr Pvc With Wheel , Green And Blue Garbage Tri-Cyle Rickshaw , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Three Wheeler , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Four Wheeler , Refrigerator For Food Storage 50 Liters - 80 Liters Single Door , Refrigerator For Food Storage 150 Liters - 250 Liters Single Door , Refrigerator For Food Storage 250 Liters - 330 Liters Single Door , Refrigerator For Food Storage 350 Liters - 490 Liters Single Door , Air Condition 1 Ton 3 Star Split Inverter Ac , Air Condition 1.5 Ton 3 Star Split Inverter Ac , Air Condition 2 Ton 3 Star Split Inverter Ac , Air Condition 1 Ton 4 Star Split Inverter Ac , Air Condition 1.5 Ton 4 Star Split Inverter Ac , Air Condition 2 Ton 4 Star Split Inverter Ac , Air Condition 1 Ton 5 Star Split Inverter Ac , Air Condition 1.5 Ton 5 Star Split Inverter Ac , Air Condition 2 Ton 5 Star Split Inverter Ac , Desert Cooler Small , Desert Cooler Medium , Desert Cooler Large , Personal Cooler Small , Personal Cooler Medium , Personal Cooler Large , Led Tv 24 With Hdmi , Led Tv 32 , Smart Led Tv 32 , Android Led Tv 32 , Led Tv 40 , Smart Led Tv 40 , Android Led Tv 40 , Led Tv 42 , Smart Led Tv 42 , Android Led Tv 42 , Led Tv 50 , Smart Led Tv 50 , Android Led Tv 50 , Led Tv 55 , Smart Led Tv 55 , Android Led Tv 55 , Led Tv 75 , Smart Led Tv 75 , Android Led Tv 75 , Wall Mount Kit For Led Tv 24 Inch To 75 Inch , Installation, Labour Charges, Other Charges For All Type Of Tv , Led Screen 19.5 Hd , Lcd/Tft/Led Monitor For Pc - 17 Normal , Lcd/Tft/Led Monitor For Pc - 18 Normal , Lcd/Tft/Led Monitor For Pc - 18 .5 Normal , Lcd/Tft/Led Monitor For Pc - 19 Normal , Led Monitor For Pc - 19 Normal , Led Monitor For Pc - 19 Branded , Led Monitor For Pc - 22 Normal , Led Monitor For Pc - 22 Branded , Led Monitor For Pc - 22 Full Hd Branded , Led Monitor For Pc - 24 Full Hd Branded , Power Cable For Pc 1.5 Mtr , Power Cable For Pc 3 Mtr , Power Cable For Pc 5 Mtr , Power Cable For Pc 10Mtr , Vga Cable 5 Meter For Pc , Vga Cable 10 Meter For Pc , Hdmi Cable 1.5 Meter For Pc , Hdmi Cable 3 Meter For Pc , Hdmi Cable 5 Meter For Pc , Hdmi Cable 10 Meter For Pc , Surge Protector 1.5 Mtr , Surge Protector 3 Mtr , Surge Protector 5 Mtr , Surge Protector 10 Mtr , Aux Audio Cable 10 Mtr For Pc To Speaker , Projector Branded , Projector Un-Branded , Projector Celeing Mount Kit , Projector Screen Size 6X4 , Installation, Labour Charges, Other Charges For Projector , Elerning Syllabus Marathi Software Per Class (1 To 4) , Elerning Syllabus Urdu Software Per Class (1 To 4) , Elerning Syllabus English Software Per Class (1 To 4) , Elerning Syllabus Marathi Software Per Class (5 To 8) , Elerning Syllabus Urdu Software Per Class (5 To 8) , Elerning Syllabus English Software Per Class (5 To 8) , Elerning Syllabus Marathi Software Per Class (9 To 10) , Elerning Syllabus Urdu Software Per Class (9 To 10) , Elerning Syllabus English Software Per Class (9 To 10) , Training Charges For E Learning Software Per Sylabus , Pendrive 8 Gb , Pendrive 16 Gb , Pendrive 32Gb , Pendrive 64 Gb , Pendrive 128 Gb , Pendrive 256 Gb , External Solid State Drives:256 Gb , External Solid State Drives:512 Gb , External Solid State Drives: 1 Tb , External Solid State Drives: 2Tb , Mouse Usb Branded , Mouse Wire Less Branded , Keyboard Usb Branded , Keyboard Mouse Usb Combo Branded , Keyboard Mouse Combo Wire Less Unbranded , Keyboard Mouse Combo Wireless Branded , Speaker / Home Theater 4.1 , Speaker / Home Theater 5.1 , Trolley Spekar 12 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike , Trolley Spekar 18 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike , Trolley Spekar 8X2 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike Option For Two 6.35Mm Port For Mic And Tws Mode , Trolley Spekar 10X2 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike Option For Two 6.35Mm Port For Mic And Tws Mode , All In One Printer (Inkjet Technology Monochrome) With Adf , All In One Printer Lejer Jet All In One , Printer All In One [Print / Scan / Copy] Mini Xerox Machine , Printer All In One [Print / Scan / Copy] Colour-Ink Jet , Printer Only For Print Laserjet Monochrome , Printer Only For Print Inkjet Monochrome , Colour Printer Only For Print Inkjet , Computer System [C2d/2Gb/500Gb Hdd] , Computer System (C2d/2Gb/1Tb Hdd) , Computer System [Ci3 8 Gen 4Gb Ram,1Tb Hdd,20 Screen, ,Keyboard,Mouse] Branded , Computer System [Ci3 9 Gen 4Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 10 Gen 4Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 8 Gen 8Gb Ram,1Tb Hdd,20 Screen, ,Keyboard,Mouse] Branded , Computer System [Ci3 9 Gen 8Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 10 Gen 8Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , All In One Pc (Ryzen 3 Dual Core 4 Gb Ddr4/1 Tb/Windows 10 Home/23.8 Inch Screen) , All In One Pc (Intel Pentium Core/ 4 Gb Ddr4/1 Tb/Windows 10 Home/23.8 Inch Screen) , All In One Computer Systembranded[Core I3,4Gb Ram,1Tb Hdd,,19To 24 Led] , All In One Computer System Branded[Core I5,4Gb Ram,1Tb Hdd,19 To 24 Led, Dos Wifi,Web Cam,Keyboard,Mouse] ] , All In One Computer System Branded[Core I3,4Gb Ram,1Tb Hdd,,19 To 22 Led, Dos Wifi,Web Cam,Keyboard,Mouse] ] , All In One Computer Systembranded[Core I5,8Gb Ram,128 Ssd, 1Tb Hdd,,27 Led,Windows 10 Wifi,Web Cam,Keyboard,Mouse] , All In One Computer Systembranded[Core I5,8Gb Ram,1Tb Ssd,,27 Led,Windows 10 Wifi,Web Cam,Keyboard,Mouse] ] , Ups For Computer System , Dvr 16Ch + 1Ip 2.4Mp , Dvr 16Ch [5 Mp Supported 2Ip Camera Supported] , Dvr 8Ch 2.4Mp Supported , Nvr 8 Ch([5 Mp Supported Ip Camera Supported] , Nvr16 Ch([5 Mp Supported Ip Camera Supported] , Surveillance Internal Hard Drive 4Tb , Surveillance Internal Hard Drive 2Tb , Surveillance Internal Hard Drive 1Tb , Dome Camera 2.4Mp , Bullet Camera 2.4Mp , Dome Camera 2.4Mp Ip Cam , Bullet Camera 2.4Mp Ip Cam , Bnc Connector , Power Connector , Power Supply 20Amp , Cctv Cable Bundle , Ip Camera 2.4 Mp , Poe Switch For 8 Ch , Poe Switch For 16 Ch , Poe Splitter For Ip Camera , Cat6 Cable Per Mtr , Pipe 10Ft Unit For Cctv Setup , Iron Wire In Kg (Min 300Ft) , Hook Packet , Labour Charges For Feeting Of Cctv Equipements , Ceiling Mount Kit For Cctv , Hevy Chairs For Kids , Baby /Kids Chair , Computer Wheel Chair , S Type Chair Non-Revolving And Non-Tilting Chair With Armrest , Office Chair Full Back Wheel , Office Chair Half Back Wheel , Office Chair Mid Back Wheel , Portable Foldable Wheelchairs For Handicap , Fiber Chair , Fibre Chair With Cushion Normal , Round Table With Chair Set , Three Seatervisitor Bench-Metal , Cement Bench For Park , Iron Patient Hospital Basic Examination Table , Wooden School Benches And Desks, Seating Capacity: Double 01 To 04 , Wooden School Benches And Desks, Seating Capacity: Double 5 To 8 , Wooden School Benches And Desks, Seating Capacity: Double 9 To 12 , Office Table 3X6 Feet , Office Table 2.5X5 Feet , Office Table 2X4 Feet , Office Table 2X3 Feet , Office Table Executive , Table Top Glass Thickness 12Mm Sqr Per Feet , Table Top Cloth( Velvet Quilted Cloth, Gsm 150) Per Meter , Table Name Plate( Clear Acrylic 2-Sided V-Shaped Desktop Sign Display Stand Name Plate 2 X 8 Inch) , Office Cupboard 6.5 Feet Steel/Iron , Office Cupboard 5.5 Feet Iron , Office Cupboard 4.5 Feet /Iron , Office Cupboard 6.5Ft With Locker , Industrial Locker Steel Almirah - 8 Locker Number Of Compartments , Book Rack4 Shelves Paint Coated Iron Almirah Bookshelf , Basics Storage Rack 7 Shelf 118X12x36 Inch Udl , Basics Storage Rack 6 Shelf 118X12x36 Inch Udl , Basics Storage Rack 5 Shelf 118X12x36 Inch Udl , Basics Storage Rack 4 Shelf 118X12x36 Inch Udl , Celeing Fan 1200 Mm , Table Fan 16 Inch , Pedestal Fan 16 Inch , Wall Mount Fan 400 Mm , Steel Bucket 10 Ltr , Steel Bucket 15 Ltr , Steel Bucket 20 Ltr , Fiber Bucket 10 Ltr , Fiber Bucket 15 Ltr , Fiber Bucket 20 Ltr , Permenant Marker Pen Box 10 Nos , Sticky Notes Paper Flag 15Mm X 76Mm Multicolour , Stapler Big Size Half Strip All Metal , Stapler Pin Big Pin Size 24/6 Pin Box , Stapler Medium Size Half Strip All Metal , Regular Pin 10 No Not Stapler Pins Box , Paper Punching Machine Small Size , Paper Punching Machine Medium Size , Paper Punching Machine Big Size , Ice Pick(Tocha) , A4 Size Paper Rim Single Psc 65 To 70 Gsm , Legal Size Paper Rim Single Psc 65 To 70 Gsm , Stamp Pad,110 X 69 Mm Small , Stamp Pad 155 X95 Mm Large , Stamp Ink Bottel 25 Ml Voilet/Red/Black , Butter Flow Ball Pen Single Pcs , Gripper Pen Single Pcs , Acrylic Name Plate Size 10X24 Inch , Acrylic Name Plate Size 60X90 Inch , Calculator 112 Step Check And Correct 12 Digit , Glass Paper Weights (Set Of 1, Multicolor) , Cotton Paper Tag, Red Advocate Paper Tie Tags 50 Pieces , File Cotton Laces, (22 Inch Long Each,50 Piece) , Plane Register 1 Quire Set On 1 Piece , Plane Register 2 Quire Set On 1 Piece , Plane Register 3 Quire Set On 1 Piece , Plane Register 4 Quire Set On 1 Piece , Spring File - Fullscape, Multicolour,(Normal File) 1 Piece , Tep Finest Paper File Record File (High Quality File) 1 Piece , Cardboard Box Files 1 Piece , Head Pins Fine Satin Pin Craft Single Box 100 Pcs , Glue Stick 5G , Glue Stick 15G , Gum - Lime 50 , Paste Gum Bottle 100Ml , Paste Gum Bottle 200Ml , Gum - Lime, 200Ml Bottle , Paste Gum Bottle 300Ml , R O Can 20 Ltr , Ro 12 Ltr With Storage Tank With Feetings And Nessesory Parts , Ro 15 Ltr With Storage Tank With Feetings And Nessesory Parts , Ro 25 Ltr With Feetings And Nessesory Parts , Water Cooler 60 Ltr With Two Tap Capasity , Water Cooler 80 Ltr With Two Tap Capasity , Water Cooler 120 Ltr With Two Tap Capasity , Curtnes Per Sq Mtr , Carpate Per Sqr Ft As Per Requirement , Chappal / Shoes Stand , Mat For School Kids 26 Pcs Set , Satranji 10X20 , Satranji 10X15 , Satranji 6X9 , Printed Plastic Floor Mat, Mat Size: 6 X 9 Feet , Bhojan Patti 1.5X 6 Floor Mat , 36 Pieces Alphabet & Number Floor Mats , Mirror Plastic Frame Mirror , Led Light 15 Watt , Led Light 18 Watt , Led Light 20 Watt , Pendent Lam Holder , Led Tubelight - 20W , Led Street Light 40 Watt , Led Street Light 30 Watt , Led Street Light 25 Watt , L Shape Pipe For Led Street Light , Clamp For L Shape Pipe Streetlight And Pole , All In One 9W Solar Street Light With Pole And Installation , All In One 15W Solar Street Light With Pole And Installation , All In One 18W Solar Street Light With Pole And Installation , All In One 25W Solar Street Light With Pole And Installation , All In One 25W Solar Street Light With Decorative Pole With Simple Light And Installation , All In One 25W Solar Street Light With Decorative Pole With Round Shape Of Single Arm And Light With Installation , All In One 25W Solar Street Light With Decorative Pole With Round Shape Of Two Arm And Light With Installation , Wire 1.5 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Wire 2 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Wire 2.5 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity 1 Kva With Installation , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity 2 Kva With Installation , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity3 Kva With Installation , Grid Connected Rooftop Solar System 1Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 2 Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 3 Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 5 Kw Solar System With Installation And Other Charges Are Included , Solar Unit Complete Set With Installation For Anganwadi/School [Fan X 1, Led Bulb X 1 With Fitting & Installation] , Solar Unit Complete Set With Installation For School/Anganwadi/ Office [1 Computer, Fan,2Light,] , Solar Unit Complete Set With Installation [ Fan X 4, Pc X 1, Light X 4, 1Hr Backup With Fitting & Installation]] , Solar Hi Mast Complete 1 Set Of 20 Watt , 50W Spv Solar Combo Including 12V/40Ah Artheon Battery With Installation , Solar Pump 7.5 Hp With All Accessories, Solar Mono Pv Panels And Installation , Inverter 1225 (12V) For Office Ups, Assorted, Standard Isi Mark , Isi Mark Inverter Tubular Battry , Fogging Machine Branded Single Blor , Fogging Machine Un-Branded Single Blor , Sanitary Pad Vending Machine , Sanitary Pad Disposal , Sanitary Pad Product Dimensions: ?21 X 7.3 X 13 Cm Per Nos , Sanitary Pad Extra Long ?Product Dimensions ?23.5 X 9.2 X 13 Cm Per Nos , Custome Face Mask , 3 Ply Face Mask , Ppe Kit , Plastic First Aid Kit With Medicines , Steel/Metal First Aid Kit With Medicines , Baby Rediant Heat Warmar , Stethoscope , Human Body Weight Machine Digital , Baby Weighting Machine Digital , Baby Weight Slater , Digital Infrared Thermometer Gun , Digital Thermometer , Finger Tip Puls Oximeter , Fully Automatic Digital Blood Pressure Monitor , Analog Blood Pressure Monitor , All In One Steam Vaporizer Machine , Hemoglobin Digital Monitor , Sterile Surgical Glove 6-Inch Pre-Powdered-Box Of 50 Pairs , Compressor Nebulizer , Blood Glucose Monitor , 25 Test Strips Glucometer , Electrical Needle Syringe Destroyer , Manual Hub Cutter , Infantometer , Mortuary Cabinet Freezer Single Person/Body , Mortuary Cabinet Freezer Double Person Body , Bleaching Bag 25 Kg , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Iron Patient Hospital Bed Manual Dimension: 3 X 6 Feet , Steel Folding Cot Iron Frame , Laptop Office Bag Multicolour Leather P.U. Office Bag , Rechargeable Led Bulb 9Watt , Rechargeable Ultra Led Torch 0.5 Watt , No Dust Broom Xl , Ceiling Cleaning Broom , Pochha With Bucket , Dust Pan Fibre , Dust Pan Ss/Metal/Iron , Vacuum Cleaner Wet And Dry 1150-Watt , Thermos Stoneware Tea Kettle Set 1000 Ml , Cup And Soucer And Tea Set , Rack For Medicine , Magazine Stand Revolving , Plastic Jar For Water 2 Ltr , Sliding Glass Notice Board 60 X 90 , Sliding Glass Notice Board 90 X 180 , Plastic Mug For Home And Bathroom 1.5Litre , Vehicle Mountable Fogging Machine Operated Electrical Double Blor , Vehicle Mountable Fogging Machine Operated Electrical Single Blor , Commercial Slide Ladder , Presentation Dias Stand Made-Up Stainless - Steel Color Royal Red - Height 4 Ft X 1.5 Ft Width. (For Offices, School, Public Speech & Conferences) , Presentation Dias Stand Made-Up Wooden Width - 61 Cms, Depth - 45 Cms, Height - 123 Cms. Material - Engineered Wood, Laminated Board. Colour - Two-Tone , Photo With Frame Standard Size For Office , Stadiometer (Height Measuring Scale For Adults And Children) , Blanket , Pvc Floor Covering Carpets Width : 1.5 Meter Thickness 0.65, To 1.00 Mm Designs : Mat Finish (Enter Rate In Per Square Meter) , Pvc Floor Covering Carpets Width : 2 Meter Thickness 0.65, To 1.00 Mm Designs : Mat Finish (Enter Rate In Per Square Meter) , Hand Wash Station Foot Operted 1 User With Pvc Water Tank 200 Ltr , Hand Wash Station Foot Operted 2 User With Pvc Water Tank 200 Ltr , Hand Wash Station Foot Operted 3 User , Hand Wash Station Foot Operted 4 User , Automatic Sanitiser Dispenser Machine , Alcohol Based Hand Sanitizer 5 Ltr Can , Alcohol Based Hand Sanitizer/ 500 Ml Sprey Bottle , Alcohol Based Hand Sanitizer 100 Ml Sprey Bottle , Alcohol Based Hand Sanitizer 50 Ml Sprey Bottle , Sodium Hypochlorite 50 Kg Can , Jeevan Drop 100 Ml Bottel , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Iron Patient Hospital Bed Manual Dimension: 3 X 6 Feet , Aluminum Grain Storage Container 100 Kg Capacity , Aluminum Grain Storage Container 50 Kg Capacity , Grain Storage Tank 20 Kg , Water Jar 2 Ltr Capacity Steel , Water Jar 2 Ltr Capacity Pvc , Aluminium Kadai 8 Ltr , Gas Bhatti Single Burner , Gas Bhatti Double Burner , Stainless Steel Round Kitchen Baskset , Aluminium Pot Heavy Patila/Rice Boiler Tope No 18 (10L) Tope 10 L Capacity 26 Cm Diameter , Aluminium Pot Lead For Patila/Rice Boiler Tope No 18 26 Cm Diameter 10L , Water Tank 18 Ltr Steel , Plate Pawbhaji Style , 5 Layer 30 * 30 Inch Wall Mount Modern Kitchen Utensils Dish Rack , Pressure Cooker 5 Ltr , Pressure Cooker 10 Ltr , Pressure Cooker 12 Ltr , Pressure Cooker 14 Ltr , Pressure Cooker 22 Ltr , Ss Milk Can/Oil Can 2 Ltr , Aluminium Pot Heavy Patila/Rice Boiler Tope No 18 (25L) Tope 25 L Capacity 26 Cm Diameter , Aluminium Pot Lead For Patila/Rice Boiler Tope No 18 26 Cm Diameter , Stainless Steel Serving Spoon For Rice Boiler , Stainless Steel Kitchen Pincers/Sandshi/Pakkad , Water Pot/Handa/Beda 10 Ltr Steel Food Grade , Stainless Steel Parat, Material Grade: 202 Size 28 , Stainless Steel Bowl/Vati , Donga Spoon , Spoon Serving Ss To Cqa Steel Sarata , Stainless Steel Serving Tray Large Size , Serving Tray Set Of 3 , Tea Spoon , Break Fast Spoon , Ss Water Glass Standard Size , Chalni/Stainer For Grain , Steel Plate , Chapati/Roti/Papad Manual Maker Press , Stainless Steel Storage Containers With Lead , Capacity: 5Kg , Stainless Steel Storage Containers With Lead , Capacity: 10 Kg , Stainless Steel Storage Containers With Lead , Capacity: 15 Kg , Stainless Steel Storage Containers With Lead , Capacity: 20 Kg , Stainless Steel Storage Containers With Lead , Capacity: 25 Kg , Tople Steel , Tople Plastic/Fibre , Wagrale , Belan Polpat , Iron Kadhai 150 Litre , Aluminium Patila Big 110 Ltr , Stainless Steel 2 Burner Gas Stove, Manual Ignition , Strainer Steel Frying Spoon , Mixer Grinder 550 Watts With 3 Multi Ouroose Grinding Jars , 1.5 Hp Table Top Atta Chakki Mini Flour Mill , Magnetic Sticks Puzzle Game For Kids (36 Pcs) , Interactive Fruit Cutting Game 8-Piece , Tower Block Game , Kids Kitchen Set Game , Rocker Horse/Elephant /Etc Ride On Toy , Fruit Set Multicolour , Abcd Slate And Block , Building Abcd Name , Carrom With Coin, Striker,And Powder , Bat Ball Without Stumps For Kids Up To 12 Year Kids Plastic , Bat Ball With Stump For Kids Up To 12 Year Kids Plastic , Badminton Racket Set Of 2 Bat , Badminton Shuttlecocks 10 Psc Box , Skipping Rope Adjustabe Hights For Kids , Skipping Rope Adjustabe Hights With Counting System , Handcrafted Wooden Indian Traditional Lagori , Teddy Rings - 7 Rings , Magic Speed Rubics Cube Size 2.5 Cube , Standard Cotton Swing , Babys Tricycle (Multi -Colour 86X64x33 Cm, 1-3 Years) , Soft Foam Cricket Bat With Ball For Kids O To 8 Yrs , Vegetable Set, Multi Color , Racket Set With Ball & Shuttlecock For Kids Plastic Table Tennis Set , 12Pc Big Size Animal Kids (12 Pcs Big Animal Set) , Flying Disk For Kids Game 03 To 06 Yrs , Hula Hoop Ring - Multicolour For Kids , Flash Card 9.5 Cmx 1375 Cm Set Of 5 Pcs , Small Board Book Set Of 5 - English - 2 To 5 Year Set Of Five As Per Requirement , Building Block For Kids ,42 Pcs Bag Packing (Multicolour) , Play Ball Set Medium Multicolour Set Of 10 Balls , Play Ball Big Size Set Multicolour Set Of 6 Balls , Abcd/Education Chart 5 Pcs Set 65X55 Cm Aprrox Size , 3D Alphbets Learning And Drawing Book , Magic Slate (Multicolor-Digital Slate Lcd E-Writing Board Electronic Notebook Graphic Tab With Pen) , Basket Ball For Kids , Side Drum Steel 14 Inch With Belt, Stick And 2 Fiber Sheet Free , Thap Dhol Ss,17.2 Inch , Lezim Instruments Standard Size , Wooden Dumbbells For Pt 1 Set , Tennikoit Ring Dotted & Plain(Pack Of 6) , Mrudung / Mridangam , Nickel Plated Handmade Musical Iron Tabla Set , Wooden Standard Harmonium Harmonium , Handmade Jhanjh , Piano Portable Keyboard 61 Keys , Professional Flutes C Sharp Medium Right Hand Bansuri Size 18.5 Inches , Cricket Bat Cricket For Kids 6 To 12 Year Wood , Cricket Ball For Kids 6 To 12 Year , Cricket Stumps For Kids 6 To 12 Year Wood , Cricket Bat Cricket For Kids 12 To 16 Year Wood , Cricket Bat Standard Size , Cricket Tennis Ball Standard Size Box 6 Pcs , Cricket Stumps Standard Size 6 Nos , Foot-Ball Standard Size , Foot-Ball Net Standard Size , Volleyball , Volleyball Net , Kho-Kho Pol Pair Standard Size Wood , Chess Board With Coin , Tent House Jumbo Big Size , Doll House & Accessories For Girls Age 3Y+ , Doll House Playhouse Playset , Doctor Set Kids Game , Toy Counting Frame Plastic , Puzzle Set , Seasaw Toy , Slide , Swing Car L76xw35x48 Approx , Wooden Block Set , Foot Basic Sewing Machine , Frp Indoor Merry Go Round , Outdoor Merry Go Round , Dholki Small For Kids Playing 3 To 12 Yrs , Park Metal Single Swing 10 Feet , Park Metal Double Swing 10 Feet , Park Metal Slide 9 Feet , Magical Handwriting Workbook Pen And Refills , Nursery Board Book , Easy Copy Colouring Book With 12 Shades Wax Crayons , Kids Painting Set , Adjustable 3-In-1 Plastic Swing For Kids With Rope And Accesorries , Dart Game With 2 Dart Pin , Alpha Numeric Plastic Leeter World -Educational Toys , Flash Cards Learning & Education Game , 6 Puzzle Board , Interactive Board , Black Board 4X6 , White/Green Board 3X4 , White-Green Board 4X6 , Writing Chalk Multi Colour 50 Chalk Sticks In The Box , Writing Chalk White Or Single Colour 50 Chalk Sticks In The Box , White Board Marker Pen- Box 10 Nos , Tablet 4 G Sim Supported (10.1) Hd , Mobile 4 G Supported , Mega Phone , Nail Cutter For Kids , Paydan , Round Dust Bin Metal [Blue + Green With 2.5Ft Stand] , Wall Watch Big Size , Fibre Toilet Single User -1 Unit , Fibre Toilet Double User -2 Unit , Fibre Toilet Four User -4 Unit , T-Shirt [24 Number,Pp Cloth] , T-Shirt [26 Number,Pp Cloth] , T-Shirt [28 Number,Pp Cloth] , T-Shirt [30 Number,Pp Cloth] , T-Shirt [32 Number,Pp Cloth] , Lower [24 Number, Sp Cloth] , Lower [26 Number, Sp Cloth] , Lower [28 Number, Sp Cloth] , Lower [30 Number, Sp Cloth] , Lower [32 Number, Sp Cloth] , Shoes & Socks For Boys,Girls 1 Number , Shoes & Socks For Boys,Girls 2 Number , Shoes & Socks For Boys,Girls 3 Number , Shoes & Socks For Boys,Girls 4 Number , Shoes & Socks For Boys,Girls 5 Number , Soft Cotton Washcloths, Napkin, Hankies For Baby , Baby Gift Kit Items Included In The Gift Pack:As Per Technical Sheet , 5 Annual Periodical Maintenance Cable Wire 1 Bundle 80 Meter , 16 Annual Periodical Maintenance Cable Wire 1 Bundle 80 Meter , 5 Annual Periodical Maintenance One Way Electrical Switch , 5 Annual Periodical Maintenance Two Way Electrical Switch , 16 Annual Periodical Maintenance One Way Electrical Switch , 16 Annual Periodical Maintenance Two Way Electrical Switch , 5 Annual Periodical Maintenance Plug Socket 3 Pin , 16 Annual Periodical Maintenance Plug Socket 3 Pin , Fan Regulator Dimmer Switch , 16 Annual Periodical Maintenance Mcb Switch , 32 Annual Periodical Maintenance Mcb Switch , Mcb Swich Box -4 -Door , Mcb Swich Box -8 -Door , Mcb Swich Box -12 -Door , Mcb Swich Box -18 -Door , 16 A Modular Electrical Switch Board, Module Size: 2, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 4, Ip65 , 16 A Modular Electrical Switch Board, Module Size:6, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 8, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 12, Ip65. , 16 A Modular Electrical Switch Board, Module Size: 14, Ip65 , 16 A Modular Electrical Switch Board, Module Size:16, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 18, Ip65 , Dry Soybeans Organic Soybean Seeds 1 Kg Packing(Mahabeej Or Govt A Approved By Nsc,Sfci , Swami Vivekananda Jivan Charitra Motivational Biography Book Marathi , Rashtramata Jijau Charitra Marathi , Bhartache Sanvidhan The Constitution Of India Marathi , Sanskardeep Shraddha Prakashan Marathi Book , Mazi Atmakatha, Autobiography Of Dr. Babasaheb Ambedkar Marathi Book , Lokraja Shahu Maharaj - Vyaktittva Aani Vichar Marathi Book , Yugpravartak Shivaji Maharaj Yanche Charitra Marathi Book , Kalika -V.S. Khandekar Marathi Book , Shyamchi Aai Marathi Book , Ase Ghadale Dr. A.P.J. Abdul Kalam - Marathi Book , Jhansi Chi Rani Laxmi Bai Marathi Book , Rangatdar Goshti Book Set Of (Red,Brown, Yelow,Green,Blue,Pink And Purple Clour Set) Navneet Set Of 7 Books , Hitopadesh Set Of 4 Books Navneet , Gosti Ashya Majach Maja Set Of 4 Book Navneet , Chatur Birbal Set Of 5 Books Navneet , Air Walker Single Out Door Gym , Air Walker Doudle For Out Door Gym , Shoulder Press Single For Out Door Gym , Shouler Press Double For Out Door Gym , Chess Press Single For Out Door Gym , Chess Press Double For Out Door Gym , Horizatial Bar For Out Door Gym , Abdominal Exercise Double For Out Door Gym , Eliticipal Trainer Single For Out Door Gym , Eliticipal Trainer Double For Out Door Gym , Rowing Machine For Out Door Gym , Cycle For Out Door Gym , Sit And Stand Twister For Out Door Gym , Triple Twister For Out Door Gym , Leg Press Double For Out Door Gym , Parallel Bar For Out Door Gym , Surf Board For Out Door Gym , Dipping Bar For Out Door Gym , Bench Press For Out Door Gym , Cross Walker For Out Door Gym , Knee Chair For Out Door Gym , Steeper And Twister For Out Door Gym , Shoulder And Chest Press For Out Door Gym , Horse Rider For Out Door Gym , Leg Stretch For Out Door Gym , Usb Rechargeable Electric Gas Lighter For Kitchen Gas Stove , Rod 4 Feet Zig Zag Indoor Gym , Rod 5 Feet Regular Indoor Gym , Rod 1 Feet Regular Indoor Gym , Standard 28Mm Rubber Weight Plates Indoor Gym , Dumbels Rubber Coated Olympic Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One Indoor Gym , Leg Curl / Leg Extension Indoor Gym , Bicep Curl Machine Indoor Gym , Adjustable Squat Rack Stand Material Alloy Steel Indoor Gym , Calf Muscle Machine Product Indoor Gym , Stepper With Riser For Indoor Gym , Gym Dumbbell Rack Material Iron, Indoor Gym , Weight Plates Storage Rack For Gym Material ? Indoor Gym , Yoga Mat Indoor Gym , Hbnc Kit For Asha Worker Including Including 9 Items As Per Bom , Multicolour-4K, Matte Vinyl Stickers Educational Rate Per Sq Feet Special Repair No Item Name & Its Technical Specification , Dvr 8/16Channel [Min 2.0Mp(1080P),8Ch Turbo Hd Dvr,H264,H264+ & Dual Stream Video Compression,Hd-Tvi,Support Ahd,Analog Camera With Adaptive Access,Rj45,Usbx2,Mouse Support,Upto 6Tb Hdd Support] , Dome Camera [Lance 3.6Mm,1080P,0.01 Lux @F1.2,0 Lux With Ir, True Day, & Night,,Ir Distance 20 Mm,Dc 12V,4W Max] , Bullet Camera [Lance 3.6Mm,1080P,0.01 Lux @F1.2,0 Lux With Ir, True Day, & Night,,Ir Distance 20 Mm,Dc 12V,4W Max] , Hard Disk For Dvr [Capacity Min 2Tb,Sata6.0Gb/S,Min7200 Rpm, Waranty Min 2Yr] , Cable Bundle [Minimum 80Mtr,Copper 3+1,Min 22Gadge] , Bnc Connector Copper [Screw Adjustable] , Power Connector Copper [Screw Adjustable] , Cctv Fitting Labour Charges [Cctv Cable Fitting,Dvr Installation,Camera Installation] , Power Supply [Min 12Volt,10Amp] , Led Display Screen [Size :19.5 Inch (49.5Cm) Hd (1600X900)Tn Panel, Vga Port,Dsiplay Port,Aspect Ratio: 16:9,Brightness (Typical):250Cd/M,Voltage :120Volts,Wattage:15Watt,Waranty Min 1 Year] , Projector [Projector Brightness: 300 Ansi Lumens Projection Technology: Dlp Projector Native Resolution: Wxga (1280X800) Contrast Ratio (Typical): 2200:1 Native Aspect Ratio: 16:10 Screen Size Compatibility: 36.2 - 362.7 Projection Distance: 1.2 - 10 M Service Life Of Lamp: 3000 Hbulb Power: 260 W Service Life Of Lamp (Economic Mode): 5000 H Throw Ratio: 1.28 -1.536 Ceiling Mount : Optional Accessory, Sold Separately Carrying Case : Optional Accessory, Sold Separatelywarranty : 5 Years For Product, 1 Year For Bulb] Mfg Warranty , Projector Screen [Supports Ultra Hd, 3 D And 4 K Technology, Spring Action Mechanism, Autolock/Instalock Mechanism, You Dont Need To Hook The Screen At The Bottom To Stop Size: - 6 Feet (Width) X 4 Feet (Height), In 4:3 Format, 84 Inches/7 Feet Diagonal Length, Comes With 1.2 Gainapprox.Keeps Your Eyes Strain Free While Viewing, Comes With Anti Uv Coating To Protect Eyes, A+++++ Grade Fabric, Ideal For Presentations, Meeting Rooms, Home Cinema.Comes In Imported Easy To Clean Super High Gain Fabric/Material, Black Coated Screen Material From Back Side Eliminates Light Penetration For Superior Color Reproduction, Complimentary Four Side Black Masking Borders Enhances Picture Contrast,.] , Led Tv 40 Inch Hd Ready (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1) Minimum 3 Year Warranty , Smart Led Tv 40 Inch Hd Ready- Smart Tv Minimum Android Version 4.4, Cpu- Minimum Dual Core 1.2 Ghz Storage Min. 4 Gb, Built In Wifi (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1), Pc Audio In , Ypbpr,Lan,Tf Slot,Audio Out, Spdif Out)- Minimum 3 Year Warranty , Led Tv 32 Inch Hd Ready (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1) Minimum 3 Year Warranty , Smart Led Tv 32 Inch Hd Ready- Smart Tv Minimum Android Version 4.4, Cpu- Minimum Dual Core 1.2 Ghz Storage Min. 4 Gb, Built In Wifi (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1), Pc Audio In , Ypbpr,Lan,Tf Slot,Audio Out, Spdif Out)- Minimum 3 Year Warranty , Speaker System 4.1 [Min Specifications: Usb + Fm+Sdcard, 1 Main Unit,4 Speaker,1 Remote,1 Audio Cable] , Trolley Speaker Small With Wireless Mic Nos -2:: Technical Specifications Wireless Bluetooth Trolley Speaker Digital Karaoke,Treble And Bass Independent Adjustment Professional Treble And ; Bass Gain Controlling Circuit Built-In Professional Wireless Microphone System Built-In Mp3 Encoding Support Connection Type:Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Micin Compatible With Dvd/Pc And Other Sound Source Intelligent Power Switch Charging Circuit User Friendly Trolley 8 Meters Operating Range , Upto 4.5 Hours Of Playback Total Output 60W Rms Controls: Sound, Mode And Track Controls Two Wireless Mics And ; Remote Included In Box Subwoofer Size : 12 Inch , Trolley Speaker Medium With Wireless Mic Nos -2: Wireless Bluetooth Trolley Speaker . Digital Karaoke,Treble And Bass Independent Adjustment Professional Treble & Bass Gain Controlling Circuit Built-In Professional Wireless Microphone System Built-In Mp3 Encoding Support Connection Type:Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Micin Compatible With Dvd/Pc And Other Sound Source Intelligent Power Switch Charging Circuit User Friendly Trolley 8 Meters Operating Range , Upto 4.5 Hours Of Playback Total Output 80W Rms Controls: Volume, Mode And Track Controls Two Wireless Mics & Remote Included In Box Subwoofer Size : 15 Inch , Trolley Speaker Large With Wireless Mic Nos -2:Wireless Bluetooth Trolley Speaker , Total Output 120W Rms Treble And Bass Independent Adjustment Connection Type: Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Mic In Compatible With Dvd/Pc And Other Sound Source User Friendly & Sturdy Adjustable Trolley With Digital Led Display 10 Meters Operating Range Controls: Volume, Mode And Track Controls Two Wireless Mic. Full Function Remote Subwoofer Size : 18 Inches & Tweeter 8 Internal & External Battery Support , Ups 600Va [Minimum Specifications :Capacity:600Va/360W,Nominal Voltage:230Vac,Output Voltage :230Vac,Battery:12V/7Ahx1,Bkp Time:10-15Mins,Max Net Weight :4.2Kg] , Wall Mount Kit Compatible For 32 Tv , Elerning Syllabus Software [Animated With Sound] , Computer System All In One [Cel Quad Core,4Gb Ram, 1Tb Hdd,20 Screen] , Computer System Cpu [Dual Core,2Gb Ram,160Gb Hdd] , Keyboard [Port : Usb, Type:Standerd,Keys Minimum:104] , Keyboard [Wireless , Type:Standerd,Keys Minimum:104] , Mouse [Port :Usb, Type:Optical,Keys :Minimum :03] , Mouse Wireless Type:Standerd,Keys Minimum:104] , Power Cable 1.8Meter For Pc , Vga Cable 1.8 Meter For Pc , Surge Protector [Minimum 4 Port,1 Fuse] , Training Charges , Installation, Labour Charges,Other Charges , Cricket Bat [5Number Full Size,Kashmir Willow] , Rubber Ball [Hevy Tennis] , Rubber Ball [Light Tennis] , Stump Set (3Qty)[Full Size, Kashmir Willow] , Rubber Ring [Regular Plane] , Badmintan Racket Set [Regular] , Football [5Number, Waterproof] , Flying Ring [Fibre,Size:Regular] , Hoops Ring [Fix] , Lagori Set [Lagori Set, Wooden] , Lagori Ball [Lightweight, Rubber] , Skip Rope [Plastick Handle, Rubber Rope,1Mtr] , Hollyball[5Number,Waterproof] , Hollyball Net[Cotton,14Mesh] , Single Slide Min 3Ft , Double Swing , Single Seasaw [Gf-70A, 6] , Toys Installation Charges , Office Chair [High Back)Product Dimensions: Length (21 Inches), Width (21 Inches), Height (48 Inches) Primary Material: Leatherette Color: Black, Style: Modern Adjustable Seat Height Tilt Mechanism Nylon Wheels , Office Chair [Medium Back)Product Dimensions: Length (20 Inches), Width (20 Inches), Height (41 Inches) Primary Material: Leatherette Style: Modern Adjustable Seat Height Tilt Mechanism Nylon Wheels , Office Chair Fibre Product Dimensions: Length (61 Cm), Width (61 Cm), Height (89 Cm) Style: Modern Stylish, Modern And Sturdy Chair Wide Seat With Arm Rest For Comfortable Sitting Experience Suitable For Indoor As Well As Outdoor Distinct Design For Backrest , Fogging Machine [Black Stone] , Educational Wall Chart Set (5Pcs, Animal, Abcd, Number,Fruits,Vegitables) , Height Charts [Ph6031 W20 X H47] , Animal Set [Ph1400] , Fruit Set [Ph8001+Ph8000] , Rocker Toy [Pgs401/F L36 X W13 X H18] , Rideon [Pgs1404 L28.7 X W10 X H20.5] , Mani Slate [Ph155 Counting Frame] , Tedy Ring [Min 5Ring Set] , Plastic Ball Big , Flying Ring [Ph160,D21.5] , Playball Set [Min 50Pcs,Min D6.6Cm Pgs601] , Two Way Essel Board [Pgs 701 L28 X W24 X H42] , Grain Storage [Capacity Min 50Kg , All In One Printer- Main Input Tray 150 Sheets Of Regular Weight 75 G/M2 (20-Lb Paper )Priority Feed Slot 10 Sheets Of Paper Up To 163 G/M2 (43 Lb) Top (Face Down) Output Bin 100 Sheets Of Regular Weight 75 G/M2 (20-Lb Paper )Output Bin60 To 105 G/M2 (16 Lbsto 28Lbs ) Print Speed14 A4 Pages Per Minute (Ppm), 15 Letter-Size Ppm First Page Out In As Low As 8 Seconds Print Resolution Fastres 600: This Setting Provides 600 Dpi Effective Output Quality. Fastres 1200: This Setting Provides 1200 Dpi Effective Output Quality. Economode: Text Is Printed Using Less Toner. Duty Cycle 8,000 Single-Sided Pages Per Month (Maximum) 1,000 Single-Sided Pages Per Month (Average) Power Consumtionas Per Fcc Compliance , Suppluing And Erecting Street Light Fitting Suitable To 30W Lamp, Including Lamp, With Pf0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-Odf/Fls2 Item No.2-9-3 , Suppluing And Erecting Mains With Isi Mark Wp 2 X 4 Sq.Mm. 1100V. Grade Aluminium Pvc Insulated And Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg Complete Erected With Required Size Of Porcelain Reel Insulators And 16 Swg Gi Binding Wire , Ro Water Filter 25 Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 50Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 100 Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 200Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Water Tank 4 Layer Tank 500 Ltr , Water Tank 4 Layer Tank 1000 Ltr , Non-Electric Water Purifier It Boasts Of Electro Adsorption Technology (Eat) Based Filter Which Gives The Power Of 4 Filters In One Physical Filter. Water Is Passed Through A 5 Stage Purification Process I.E. One Pre-Filter And 4 Filters Under Eat. The Filter Is Self-Serviceable I.E. We Can Change It Ourself When It Is Required. The Natural Essential Minerals Are Maintained In The Water Thus Giving Us Clean And Healthy Water. This Water Purifier Doesnt Waste Water. Tank Capacity: 6 Litres Flow Rate: 1 Litre Per Minute Life Of Eat Filter: 12 Months 2-Year Warranty And Even Works Under Low Water Pressure Conditions. Non-Electric , Electronic Infant, Baby Weighing Scale Conformity To Indian Standrad, Is:9281-3 (1981) Part I,Ii, Iii & Part Iv (Latest) Yes Bis Marked Yes Display Led Battery Backup True Speed Of Measurement 5 Second Class Type Class-Iii Rated Load/ Capacity(Kg) 20 Kg Backup Time(Hour) 12 Internal Calibration True Power Requirement Mains Operated Battery Operated Battery Type Rechargeable Type Of Sensing Element Load Cell Warranty In Years 1 Tare Provision Manual Number Of Display Single Type Of Electronic Weighing Machine Electronic Infant Weighing Scale Resolution(Gms) 10 G Dc Operating Voltage In Volts 6 Volt Power Supply Single Phasepan/ Platform Size 550 Mm X 300 Mm , Weighing Scale Bis Marked Yes Conformity To Indian Standrad, Is:9281-3 (1981) Part I,Ii, Iii & Part Iv (Latest) Yes Rated Load/ Capacity(Kg) 150 Kg Battery Type Non-Rechargeable Tare Provision Automatic Internal Calibration True Backup Time(Hour) 10 Display Led Power Requirement Battery Operated Type Of Electronic Weighing Machine Electronic Personal Weighing Scale Warranty In Years 1 Number Of Display Single Speed Of Measurement 5 Second Dc Operating Voltage In Volts 6 Volt Power Supply Single Phase Resolution(Gms) 50 Gm Class Type Class-Iii Battery Backup True Type Of Sensing Element Load Cell Pan/ Platform Size 300 Mm X 300 Mm , First Aid Box Dressing Kit Is A Blister Pack With Rigid 3 Chamber Tray Made Of Hard Film Of Min 500 Micron Thicknesses To Provide The Strength While Being Used As A Container The Other Side Should Be Packed With A Medical Grade Paper, With The Thermal Sealing Min 7 Mm Or More As Per International Standard In Easily Peelable Pouch Yes Capacity 30 Milliliter Sterlity Of The Ready To Use Kit Sterile Utility Single Use - Disposable Items In The Kit No Of Gauze Of Different Sizes, 12 Ply, British Pharmacopoeia 17 Type, With All Margins Infolded So That No Loose Thread Is Visible On The Edges 5 No Of Gauze Balls Folded Nicely By Machines Without Any Loose Fibre 5 No Double Teeth Tweezer Made Of Fibre Glass And Polypropylene To Ensure The Adequate Strength In Holding The Articles 1 No Of Non Woven Sheets Of Different Sizes With Excellent Liquid Barrier Properties 1 No Of Dressing Pads Of Different Sizes Highly Absorbable Inner Cellulose Layer Completely Sealed In Nonwoven Covering To Hold The Liquid Inside The Pad And Avoid Seepage 1 No Of White Hand Towels, Made Of Wood Pulp Paper , Tds Meter Type Microprocessor Based Display Led / Lcd / Touch Screen, 3 Digits Calibration Up To 3 Points With Auto Buffer Ph Range (Ph) 0.00 To 14.00 Accuracy (Ph) +- 0.05 Corrosion Resistant Yes Power Requirements 230 V +- 10, 50 Hz Ac Modes Ph Mv- C Parallel Temperature Indication Yes Temperature Compensation Type Automatic Temperature Accuracy (Degree C) +- 0.3 Temperature Compensation Range (Degree C) 0 To 100 Resolution (Ph) 0.01 Operating Humidity: Rh In (%) 0 Operating Temperature (Degree C) -1 , Click Scanner Document Book Scanner Type Table Top (Without Computer And Display Screen) Technology Digital Camera Scanning Image Sensor Chip Ccd Embedded Pc Configuration If Applicable No Size Of Touch Screen Diagonally , If Applicable (Cm) No Glass Plate To Provide Flat Images Not Available If Available, Shape Of Glass Plate Flat Movement Of Glass Plate Manual Number Of Digital Cameras 1 Scan Area (Book Size When Open) A3 Maximum Book Thickness (Mm) 125 Optical Resolution (Dpi) 200 Scan Speed (Sec Per Scan) 1 Processing Time / Cycle Time (Scanning + Image Processing + Storage) (Seconds) 10 Buffer Memory (Mb) 8 Light Source Na Scan Mode (Colour Format) Colour / Black & White / Gray Scale Optical Zoom No Book Holder / Cradle Flat Bed,Manually Adjustable V-Shaped Cradle,Motorized V-Shaped Cradle,Inverted V-Shaped Glass Platen,Folder Mode Book Position During Scanning Face-Down On Flat Bed With Book Edge Working Mode (Page Turning) Manual Scanner Inter Face: (Computer Connection To Scanner Nil Network Interface (Gigabit Fast Ethernet With Tcp/Ip) No Applications Programming Interface (Api) Nil Output Formats Nil Supported Operating Systems Window 10 Image Processing Abilities Nil Overall Dimensions (Lxwxh)(Mm X Mm X Mm) 100X1000 Net Weight (Kg) 1 Max Power Requirements (Watt ) 60 Operating Temperature (Degree C) 45 Operating Humidity (% Rh) 42 Availability Of Test Reports From Central Govt/Nabl/Ilac Accredited Lab Showing Conformity To The Specifications (Test Reports Are To Be Furnished When Demanded By Buyer) Yes If Yes,Test Report Number Na If Yes,Test Report Date Na If Yes,Name Of Test Lab Na If Yes,Address Of The Test Lab Na Free Installation, Commissioning And Demonstration Yes On Site Oem Warranty (Year) 1 , All In One Printer =Minimum Technical Specification Machine Type Mono Laser All-In-One Available Functions Print, Copy And Scan Printer Print Speed Up To 18 Ppm (A4) Printing Method Monochrome Laser Beam Printing Print Quality Up To 1200 X 600 Dpi With Automatic Image Refinement Print Resolution 600 X 400 Dpi First Print Out Time 7.8 Secs Printer Languages Ufrii-Lt Print Margins 5 Mm-Top, 6 Mm- Bottom, 5 Mm-Left And Right Toner Saver Mode Yes Copier Copy Speed Up To 18 Ppm (A4) First Copy Output Time (Fcot) Approx. 12 Seconds Or Less Copy Resolution Up To 600 X 600 Dpi Copy Modes Text, Text/Photo, Text/Photo+, Photo Multiple Copy Up To 9 Copies Reduction / Enlargement 50-200% In 10% Increments Toner Saver Mode No Other Features 2 On 1, Id Card Copy Scanner Type Colour Scan Resolution Optical: Up To 600 X 600 Dpi Enhanced: Up To 9600 X 9600 Dpi Colour Scanning Depth 24 Bit/24 Bit (Input/Output) Greyscales 256 Levels Compatibility Twain, Wia Max. Scan Width 216 Mm Media Handling Scanner Type Flatbed Paper Input (Standard) 150-Sheet Tray Paper Output 100-Sheet Media Types Plain Paper, Heavy Paper, Recycled Paper, Transparency, Label, Envelope, Index Card Media Sizes Tray: A4, B5, A5, Executive, Envelope (Com10, Monarch, Dl, B5, C5), Ltr, Lgl, Statement, Custom Sizes: Width 76 X 216 Mm; Length 127 X 356 Mm. Media Weights Tray: 60 To 163 G/M² Interface & Software Interface Type Usb 2.0 Hi-Speed Operating System Compatibility Windows 7/2000/ Xp/ Vista Mac Os X Version 10.4.9 - 10.7.X¹linux² Software And Printer Management Scanning Tolls General Features Duty Cycle Max. 8,000 Pages Per Month¹ Warm-Up Time Approx. 10 Seconds From Power On Memory64 Mb Control Panel 1 Digit Led Operating Environment Temperature: 10 To 30ºc (50 To 86ºf) Humidity: 20 To 80% Rh (No Condensation) Power Source 220-240 V (±10%), 50/60 Hz (±2 Hz) Power Consumption Maximum: Approx. 960W Active: Approx. 450W Sleep Mode: Approx. 1.4 W Typical Electricity Consumption (Tec): 0.6 Kwh Noise Levels Sound Power Active: 65.3Db Or Less, Standby: 43.0Db Or Less Sound Pressure Active: 50.4Db, Standby: Inaudible Consumables Cartridges Cartridge 725 (1,600 Pages¹)² , Bio Metric Attendance Recorder Machine Specification Type Embedded Linux Based Biometic Attendance System Screen Size (Inch) 3 = N 5 Screen Resolution (Pixels) 800 X 480 Processor Speed (Mhz) 800 Ram (Gb) 1 Internal Storage (Gb) 4 Usb Port (Numbers) 1 Micro Usb Port Yes Battery Back Up Yes Network Connectivity Lan(Ethernet) Interface Only Mifare Card Support Yes Gprs Yes Internal Speakers Yes Queue Throughput (Number Of People To Mark Attendance Within One Minute) (Number) 20 Stqc Certified Biometric Identification Device Single Fingerprint Scanner Operational Endurance 24 X 7 Device Casing Material Polycarbonate Casing Thickness (Mm) 157 Ingress Protection Ip 65 Api/Sdk Stqc Uidai Certified Register Device (Copy Of The Certificate To Be Furnished , If Demanded By The Buyer) Yes Finger Placement The Fingerprint Scanner Should Be Ergonomically Placed To Support Ease Of Usage For Biometric Attendance In Standing Posture Of The User Drop Test Compliance For Casing From A Height Of 1 Meters No Drop Test Compliance For Casing From A Height Of 2 Meters No Separate Charging Non Usb Port Availabilty With Ac Adaptor Yes Rohs Compliant Certificate Yes Bis Under Crs Of Meity Yes Bis Registration Number Na Type Test Certificate Covering All Parameters And Environmental Tests From Stqc Certified Lab No If Yes ,Ttc Number And Date Na If Yes ,Name Of The Lab Na If Yes ,Address Of The Lab Na On Site Oem Warranty 1 , Steel Almarih /Kapat Without Lockers Conformity To Indian Standard Is:3312 Latest True No Of Shelves (Nos) 4 Type Of Shelves Fixed Locker Provided False Cloth Hanging Provision In The Almirah False Number Of Doors (Nos) 2 Door Stiffner Upto Full Door Height Provided With The Almirah Doors True Umber Of Hinges With Each Door (Nos) 3 Construction Welded Lock Three Way Bolting Device Controlled By Lock Material Material M.S Sheet Conforming To Commercial Quality Cr- 1,Grade 340 Of Is 513:2008 (Reaffirmed 2013)(Fifth Revision)Amdt. No.1 Material Of Almirah Doors M S Sheet Sheet Thickness Of Locker 0.8 Mm Sheet Thickness Of Door In Mm 0.8 Mm (Minimum) Sheet Thickness Of Sides,Back , Top And Bottom 0.8 Mm (Minimum) Sheet Thickness Of Shelves 0.6 Mm Sheet Thickness Of Pedestal In Mm 0.8 Mm (Minimum) Material Of Lock Brass And Steel Finish Material Of Keys Steel Dimension Height (Without Pedestal) (In Mm) (+/- 10 Mm) 1855 Width In Mm (± 7 Mm) 910 Millimeter Depth In Mm (±5 Mm) 430 Millimeter Inside Height Of Locker In Mm (± 5 Mm) N.A Inside Width Of Locker I Mm (±5 Mm) 910 Mm Inside Depth Of Locker In Mm (±5 Mm) 430 Mm Width Of Stiffner In Mm (±5 Mm) 115 Mm Thickness Of Ms Sheet Of Stiffner (In Mm) 0.6 Mm Stiffened Pedestal Height In Mm (±2 Mm) 120 Pedestal Width In Mm (±2 Mm) 70 Colour & Finish Finish Synthetic Enamel Colour Of Paint As Per Work Order Packing: Gutta Packing , 80 Kg Home Gym Indoor Package:(Rubber Plates) Of 20 In 1 Bench With 3Ft Curl And 5Ft Plain Rod, Gym Accessories And Dumbbell Rods 80Kg Pure Rubber, Weight 10Kg X 4Pcs 5Kg X 4Pcs 3Kg X 4Pcs 2Kg X 4Pcs 20 In 1 Bench (Features: Incline, Decline, Flat, Leg Curl And Leg Extension, Chest Press/Butterfly, Lat Pull Down, Ground Pulley, And Dips, Arm Curl) 3Ft Curl Rod And 5 Ft (25Mm) Plain Rod One Pair Of Dumbbell Rods, Hand Gripper, Hand Gloves And Skipping Rope , Weight Lifting Bar -4 Feet Utility Men Mass Of Bars 20 Kg ( Men ) Length Of Bar 1220Mm ( Men ) Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Weight Lifting Bar -5 Feet Utility Men Mass Of Bars 20 Kg ( Men )Length Of Bar 1524Mm ( Men )Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Weight Lifting Bar 7 Feet Utility Men Mass Of Bars 20 Kg ( Men ) Length Of Bar 2200Mm ( Men ) Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Dumbels Rod 1Foot Heavy Duty Workout Bars/Dumbbell Rods Length:-14Inches Material:-Steel Rod With Plastic Firm Hold Grip Nickel Electroplated To Protect It From Corrosion 14Inches Rods X2pcs. + Locks To Hold Plates 4Pcs , Dumbels Plate 2.5Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 5 Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainersbest Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 7.5 Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 10Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dips Stand 1Par X450 Easy-Dismantle, Convenient And Portable, Foam Handles Suitable For Power Push Up Training With Daily Use You Can Achieve To Narrow The Abdomen, Hips, Chest While Strengthening Your Upper Abdomen, Chest Shoulder And Triceps, Biceps Suitable For Home Use And Travelling Taking Comes In Compact Design And Ergonomic Handles For A Comfortable And Secure Grip , Bench Press Multy Purpose 6 Versatile Positions Flat, Incline And Decline (F.I.D Bench) Strong Tubular Metal Frame Makes This Machine Extra Sturdy Chip Resistant Frame Coated With Epoxy Powder Easy Self Assembly Required (Full Manual Included) , Garbagecar/Ghantagadi Type Of E Cart Fully Electric, Battery Operated Motor Driven For Carrying Bins Colour Of E Cart Green And Bluethe E Cart Must Fabricated From Good Quality Steel Properly Painted To Avoid Rusting For More Than 5 Years, Yes Name And Grade Of Steel From Which E Cart Body Framed Crca Steel Kerb Weight Of E- Cart (Kg) 370 Kilogram Garbage Carrying Capacity (Kg) 310 Kilogram Run Distance (For A Full Charge Of Battery , To Be Tested With Full Load At Maximum Ais-040 )) (Km) 120 Number Of Bins 2 Capacity Of Individual Bins In Litres (Ltrs) 249 Liter Type Of Chassis For E Cart Monocoque Pressed Section Ground Clearance As Per Is : 9435 (Mm) 180 Wheel Base (Mm) 935 Millimeter Turning Radius (Mm) 1698 Millimeter Power Transmission From Motor Shaft To Wheels Direct Mounting Please Specify The Mechanical Mechanism Otherwise Put Na Na Type Of Battery As Per Ais-048 Lead Acid , Ev Grade , Tubular Deep Discharge Capacity Of The Battery Approved By Icat/Arai (Ah) 100 Battery Voltage ,Nominal (Volts) 48V Maximum Overall Dimensions Of The Battery ( L X Wx H ) (Mm3) 400X170x210 Nominal Filled Weight Of The Battery (Kg) 29.7 Kilogram Motor Controller ( Must Suitable For Starting, Accelerating, Ecelerating, Driving , And Stopping Of E Cart Availabile Battery Charger 220/230 V Nominal Input Voltage , High Efficiency Type Charging Current (A) 15 Type Of Motor Brushless Dc Motor Motor Output Power ,48V/60V At Full Load (Watt) 1209 Overall Efficiency Of The E Cart ( To Be Tested At Full Load With Maximum Speed As Per Concerned Ais Standards (%) 85 Gradeability Of E-Cart , ( To Be Tested At Full Procedure As Per Ais -003 Load (Degree) 75 Certification Vehicle Certification Arai If Vehicle Certification From Others Agency ,Name Of The Agency Otherwise Put Na Arai Vehicle Certification Number And Date Aalb 0283 1 Sep 2016 Constructional Seating Facility For Driver Only Length Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.69 Width Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct, 2014 (Meters) 0.987 Height Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.695 Dimensions Of The Cabin Provided For Bins (Mm X Mm X Mm) (Mm3) 1328X986x356 Size Of Front Tyre (Mm) 3.00-12 Size Of Rear Tyre 3.00-12 Brake Type (Front) Drum Brake Type ( Rear ) Drum Suspension System (Front) Shock Absorbers With Compression Spring Suspension System ( Rear ) Leaf Spring And Hydrolic Reverse Gear Facility Yes The Mounting Of Batteries Yes Vehicle Lighting System Lcd Based Instrument Panel Containing Speedometer And Battery Charging Indicator Yes Glass Windshield With Wiper Motor As Approved By Icat/Arai Yes Battery Make As Per Ais :048:2009 , Kachara Gadi /Hand Trolley (Collecting Garbage) Collection Conforming To Indian Standard Is 4184: 1967: Latest For Two Wheels Type Wheel Barrowproduct Isi Marked No Cm/L Number Na Nominal Capacity Of Wheel Barrow 110 Liters (Two Wheel Type Wheel Barrow) Material Used For Manufacture Steel Sheets (Steel Sheets Shall Be Not Less Than 1.60 Mm In Thickness, And Shall Conform To Is : 1079 ) Type Of Chassis Frame Any Other Suitable Steel Section, Such As Flat Of Size 30 X 6 Mm Wheel Material Ms With Solid Rubber Tyre Minimum Diameter Of The Axle / Spindle (Mm) 25Minimum Nominal Width Of Tyre (Mm) 50 Minimum Diameter Of The Wheel (Mm) 300 Minimum Bearing Length Of Axle/Spindle 25 Mm At Each End Type Of Bearing / Bush Cast Iron Maximum Clearance Between The Bearing And Axle (Mm) 0.5 Finish Of Metal Parts Other Finish Finish Other Than Two Coats Of Black Bituminous Paint And Galvanised Yes Availability Of Test Report From Nabl/ Ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification. Yes , Garden Bench Governing Specification Surface Mount Reinforcement Bench Conforming To Rdso Specn. (Item No. 172020 Of Ussor) Design Conforming To Drawing No. Rdso/Wks/2014/3 Date : 07.11.2014 Technique Compaction Technique And With Reinforcement Conforming To Govng. Specn. Hair Basisscope Of Supply Scope Of Supply Includes Erection And Installation Of Precast Concrete Reinforce Benches With Backrest Construction Of Bench With Concrete Mix Design - Reinforcement Steel - Connections - And Paint Members Of Bench Reinforced Cement Concrete Base Support And Planks Installation Each Seating Plank ( Bottom ) Of Bench Bolted With Leg By Help Of 12 Mm Dia. X 65 Mm Length Galvanized Steel Countersunk Bolts With Eva Washer - Backrest Planks Fitted With Half Threaded Carriage Bolts And Nuts Of Size 165 Mm X 8 Mm Dia With Eva & Steel Washer Material Concrete Mix Design M-30 Grade Concrete Mix In Accordance With Is : 10269/Latest In Gray Cement By Using Vibro - Compaction Technique And With Reinforcement As Detailed In Govng. Specn. Reinforcement Steel Tmt Reinforcement Bars Conforming To Is : 1786/Latest Of Dia 10 Mm Used As Main Reinforcement Bar And 4 Mm Dia Mild Steel Bars Used As Stirrups As Per Drawing Tirrups Details 10 Nos. - 4 Mm Dia Bar @ 150 Mm C/C Main Reinforcement Bar 4 Nos. - 10 Mm Dia Bar Adequate Clean Concrete Cover 15 Mm Minimum Material For Connecting Seating Plank With Leg 12 Mm Dia X 65 Mm Long Galvanized Steel Countersunk Bolts Confmg. To Is : 1367 / Latest With Eva Washer Material For Connecting Back Rest Plank With Leg Half Threaded Carriage Bolts And Nuts Of Size 165 Mm Length X 8 Mm Dia With Eva And Steel Reinforced Cement Concrete Planks Using M-30 Grade Gray Cement Mixed With 3 % Red Pigment Dimension , Inverter With Battry Inverter Governing Specification Generally Conforming To Is:13314 Rating In Kva & Min. Vah Capacity Of Battery 2 Kva/8640 Vah Technology Mosfet-Pwm Energy Star Rating 5 Star Trolley With Trolley Type Of Battery Tubular Battery Confirming To Is:13369 Backup Time (Minutes) Minimum 180 Minutes Constructional Thickness Of Sheet For Trolley (In Mm) Minimum 1.2 Trolley Material Crca Steel Type Of Enclosure Crca Steel Thickness Of Sheet For Enclosure ( In Mm) Minimum 1.2 Inverter Shall Have By Pass Facility Yes Functional Total Harmonic Distortion /=5% Input Single Phase Sine Wave(120 To 260 V) Output Single Phase Sine Wave 230 V Inverter Efficiency (%) /=87% Overload Time (In Minutes) /=10 Overload Of Rated Load (In %) /=10 Protection Battery Cut-Off Voltage To Protect From Overdischarge (In Volt) 10.5 Degree Of Protection Ip 21 Metering And Indications The Inverters Shall Be Provided With Output Voltage And Current Meters Conforming To Is 2419 : 1979 And Of An Accuracy Class Not Inferior To 2.5 In Accordance With Is 1248 : 1983 Yes Certifications Availability Of The Type Test Report From Central Govt. /Nabl/Ilac , Types Of Lead Acid Of Battery Stationary Cells And Batteries, Lead Acid Type (With Tubular Positive Plates) Conforming To Is:1651/1991 Nominal Voltage Of Battery (Volts) 12.0 Volt Material Of Container Polypropylene Batrry 150 Ted Capacity At C20 Discharge (Ah) 200 Warranty (Years) 1 Year Battery Condition Charged Constructional Dimensions (L X W X H) (Mm X Mm X Mm) As Per Relevant Is Specifications Volume Of Electrolyte (Ml) 5000 Weight Of Dry Battery (Kg) Shall Be As Per Relevant Is: Specn., Corresponding Ah Yes. No.Of Cells Per Battery (No.) 6 Cells For 12 Volt Battery , Air Cooler Large General Features For Rooms Up To (Mt.3 *) 142 Engg. Plastic (Blower / Fan) Double Blower Tank Capacity (Up To Brim- L) 110 Remote Control N/A Auto Louver Movement Yes Cool Flow Dispenser Yes Empty Tank Alarm Yes Cooling Media Hybrid Mosquito Repellent Yes Electronic Humidity Control Yes Air Throw Distance (Mt) 7 / 24 Natural Mode Yes Sleep Mode Yes Off Timer Yes Fully Closable Louver Yes Automatic Horizontal Louver Yes Automatic Vertical Louver Yes Ergonomic Handle Of Easy Movement Yes Easy Removable Cooling Pads Yes Voice Assist Yn/A I-Pure Technology Yes Wattage 230V / 50Hz 205 Product Dimensions (Mm) Length 763 Breadth 430 Height 1235 Carton Dimensions (Mm) Length 810 Breadth 450 Height 1275 I-Pure Technology Smell Filter Yes Bacterial Filter Yes Allergy Filter Yes Uvc Germicidal Yes Pm2.5 Wash Filter Yes , Air Cooler Medium General Features For Rooms Up To (Mt.3 *) 127 Engg. Plastic (Blower / Fan) Fan Blower/Fan Diameter (Mm) 358 Speed Control 3 Tank Capacity (Up To Brim- L) 70 Remote Control No Auto Louver Movement Yes Cool Flow Dispenser Yes Empty Tank Alarm No Cooling Media Honeycomb I-Pure Technology Yes Wattage 230V / 50Hz 205 220V / 60Hz 350 110V / 60Hz 365 Product Dimensions (Mm) Length 635 Breadth 500 Height 1125 Carton Dimensions (Mm) Length 600 Breadth 475 Height 1175 Product Weight (Kgs) 14.9 Product Weight Incl. (Pack) (Kgs) 18.8 No Of Units Per 40Ft Container (Hc) 188 I-Pure Technology Smell Filter Yes Bacterial Filter Yes Allergy Filter Yespm2.5 Wash Filter Yes , Air Cooler Small General Features For Rooms Up To (Mt.3 *) 71 Engg. Plastic (Blower / Fan) Double Blower Tank Capacity (Up To Brim- L) 55 Auto Louver Movement Yes Cool Flow Dispenser Yes Cooling Media Aspen Air Throw Distance (Mt) 7 / 24 Automatic Vertical Louver Yes Ergonomic Handle Of Easy Movement Yes Easy Removable Cooling Pads Yes Wattage 230V / 50Hz 205 Product Dimensions (Mm) Length 763 Breadth 430 Height 970 Carton Dimensions (Mm) Length 810 Breadth 450 Height 1010 , Air Condition 1 Ton Split Inverter Ac Capacity (Watts) 3440 Energy Efficiency (Iseer) 5.2 Moisture Removal (L/Hr) No Noise Level (Indoor High/Low) No Compressor Type Invertor Power Consumption 830 Watts Voltage No Auto Restart Yes On Timer Yes Off Timer Yes Dehumidification No Sleep Yes Swing Yes Remote Control Yes (Lcd) Indicators Yes Indoor Unit Size (W X D X H) Cm 84.5 X 18.0 X 27.5 Outdoor Unit Size (W X D X H) Cm 82 X 30 X 54 Indoor Unit Weight (Kg) 12.5 Outdoor Unit Weight (Kg) 33 Warranty 1 Year On Functioning And 10 Year On Compressor 5 Year Condenser Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Air Condition 1.5 Ton Split Inverter Ac Capacity (Watts) 5000 Energy Efficiency (Iseer) 4.9 Moisture Removal (L/Hr) No Noise Level (Indoor High/Low) No Compressor Type Invertor Power Consumption 1350 Watts Voltage No Auto Restart Yes On Timer Yes Off Timer Yes Dehumidification No Sleep Yes Swing Yes Remote Control Yes (Lcd) Indicators Yes Indoor Unit Size (W X D X H) Cm 94 X 20 X 29.8 Outdoor Unit Size (W X D X H) Cm 85 X 40 X 59 Indoor Unit Weight (Kg) 16 Outdoor Unit Weight (Kg) 39 Warranty 1 Year On Functioning ,10 Years Compressor Warranty & 5 Years Condenser Warranty Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Air Condition 2 Ton Split Inverter Ac Capacity: 2 Ton Rating: 5 Star Iseer: 4.9 Capacity: 2 Ton(S) Bee Rating: 5 Star Ac Type: Split Usage: Office Warranty: 3 Year(S) Features: 7 Years Compressor Warranty, Auto Mode, Copper Condenser And Connecting Pipe, Dry Mode, Environment-Friendly R410a Efrigerant Timers: Yes Auto Restart: Yes Sleep Mode: Yes Remote Control: Yes Active Carbon Deodoriser: Yes Catechin Filter: Yes Color: White Dimension: 800X300x690 Weight: 45 Cooling Capacity (Watts): 6155 W Power Input (Watts): 1784 W Copper Condenser 7 Years Compressor Warranty Eco-Friendly Refrigerant Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Color Printer Printer Type - Ink Tank; Functionality - All-In-One (Print, Scan, Copy) , Scanner Type - Flatbed; Printer Output - Colour Connectivity - Usb This Printer Comes With 2 Extra Bottles Black Ink In The Box, In Addition To 1 Each Of Cyan, Yellow, Magenta And Black Pages Per Minute - 33 Pages (Black & White), 15 Pages (Colour) ; Cost Per Page - 7 Paise (Black & White), 18 Paise (Colour) - As Per Iso Standards Ideal Usage - Home And Small Office, Regular / Heavy Usage (More Than 300 Pages Per Month) Page Size Supported - A4, A5, A6, B5, C6, Dl ; Duplex Print - Manual ; Print Resolution - 5760 X 1440 Compatible Ink Bottle - T6641 (Black), T6642 (Cyan), T6643 (Magenta), T6644 (Yellow) ; Page Yield - 4500 Pages (Black & White), 7500 Pages (Colour) Warranty - 1 Year , Supplying Installing Testing & Commissioning Solar Street Light Pole Comparing Of 9 W Led Fitting 12 V Min Ah Maintanance Free Lithium Battry Box Weatherproof Mounted On 75/80 Mm Brackets Foundation Earthing And Nessasaery Accesaries Complite As Per Specification No - Esd-Sol-Stl(4-3-11) , Providing Ms Boxex With Locking Arren- Gement Fitting Etc , Providing And Fixing Of Retro-Reflectorised Informatary Sign Board Rectangular/Square Meter Made Out Of 2Mm Alluminium Sheet Bonded With White Reflective Sheeting Of Class B , Refrigerator Small Number Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 99 L Defrosting Type Direct Cool Shelf Type Wire Number Of Shelves 2 Voltage Range 140-260V Hfc And Cfc Free Yes Color Wine Red Dimension (Mm) 850 X 487 X 568 Warranty 10 Year Compressor Warranty Other Features Interior Light: Bulb Anti-B Technology: Yes 100% Environment Friendly Low Starting Voltage Uninterrupted Cooling Runs On Home Inverter 24 Hour Freshness , Refrigerator Medium Number Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 181 L Defrosting Type Direct Cool Shelf Type Wire Number Of Shelves 2 Voltage Range 140-260V Hfc And Cfc Free Yes Color Candy Wine Dimension (Mm) 1128 X 541 X 661 Warranty 10 Years Compressor Warranty Other Features Door Lock 2.5L Aqua Space In Door Shelf Interior Light: Bulb Anti-B Technology: Yes 100% Environment Friendly Low Starting Voltage Uninterrupted Cooling Runs On Home Inverter 24 Hour Freshness , Refrigerator High Number Of Doors Single Doornumber Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 210 L Defrosting Type Direct Cool Shelf Type Toughened Glass Number Of Shelves 2 Voltage Range 110-260V Hfc And Cfc Free Yes Color Pearl Wine Dimension (Mm) 1341 X 577 X 667 Warranty 10 Years Compressor Warranty Other Features Max Savings With Inverter Technology Runs On Home Inverter 24 Hour Freshness , Sewing Machines Specification Indian Standrad For Household Sewing Machines Is:1610 Latest Certification Isi Marked Yes Cm/L No And Date (If Yes) 23112018 Sewing Mechanism Design Single Needle Design For Producing Two Thread Lock Stitch. Reverse Stitch Mechanism Yes Thread Spool Pin Yes Driving Arrangement Driving Arrangements Foot Operated Machine Electric Motor Conforming To Is 996 Latest For Motor Driven Machine Yes Starting Switch For Electic Motor Yes Speed Controller For Electric Motor Yes Pulley And Belt For Electric Motor Yes Safety Requirements Connforming To Is302(Part I)Latest For Electrical Equipment Used Yes Table/ Base/ Stand Table/ Base/ Stand Integral Part Of Sewingmachine Yes Wooden Table Or Base Conforming To Is 12789 Latest Yes Stand(If Supplied) Conforming To Is 12740 Latest Yes Performance Sewing Machine Accuracy Requirement Conforming To Is 7491 Yes Sewing Requirements Conforming To Is 7492 Yes Durability Requirements Onforming To Is 7493 Yes Other Requirements Nickel Plus Chromium Plated Parts Conforming To Service Condition 1 With Designation Fe/Ni/0Bcr R Of Is 1068 Yes Lubrication Orifices Yes An Automatic Thread Tension Release Yes Sewing Machines Components Conforming To Is Pecifications At Annex B To Is 1610 Latest Yes Accessories Supplied With Each Machine In Service Ox(Interchangeable With Machine Of The Same Make And Model) A) One Oil Bottle Filled With 50Ml Oil Min B) Two Screw Drivers (Engineering),One Large And One Small C)Three Bobbins D)Three Needles E) One Embroidery Plate (Where Drop Feed Arrangement Is Not Provided) F) A Booklet Containing Manufacturer S Operating Instruction And Technical Characteristics G) Spool Pin Pad Or Felt Washers (4 Nos) H) Needle Threader Yes Packing Packing In Accordance With Is 8355 Yes Warranty (Years) 1 , Sanitary Napkin Disposal Machine Specification Type Wall Mountable Purpose Burn Used Sanitary Napkins To Sterile Ash And Stop Automaticallycolor Elephant Greyoperation Mode Electronically Operated, Fully Automatic Loading Type Front Loading Stand Provided No Number Of Chambers Two Trap Door Available Yes All Ms Parts Powder Coated Yes Spare Parts Should Be Available For Minimum 5 Years From Date Of Supply Yes All Electrical Parts Are Isi Marked Yes Dimensions Of Main Unit Thickness Of Thermal Insulation Material (Mm) 40 Millimeter Thickness Of Ms/Ss Sheet Of Housing Cabinet (External) (Mm) 1.2 Millimeter Thickness Of Ms/Ss Sheet Of Burning Chamber (Internal) (Mm) (Min) 5 Millimeter Machine Width(Mm) 200-300 Machine Depth (Mm) 201-300 Machine Hight(Mm) 200-500 Machine Weight(Kg) 16-30 Door Width(Mm) 101-150 Door Height(Mm) 101-150 Thickness Of Door (Mm) 25 Millimeter Internal/Burning Chamber Shape Vertical Cylindrical Flexible Emission Outlet Pipe Dia (Mm) 25 Millimeter Detachable Ash Tray Length (Mm) 100-150 Detachable Ash Tray Width (Mm) 151-200 Detachable Ash Tray Height (Mm) 5-15 Stand Height (Mm) 500 Millimeter Stand Width (Mm) 200-300 Stand Depth (Mm) 201-300 Material Of Machine Unit Material Of Housing Cabinet (External) Mild Steel(Crca) Sheet Material Of Burning Chamber (Internal) Mild Steel(Crca) Sheet Finish Of Ms Parts Of Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Material Of Thermal Insulation High Density Ceramic Fiber Sheet Constructional Features Thermal Insulation Of Burning Chamber Housed In Outer Chamber Yes Burning Chamber Tray Provided Yes Emission Outlet Pipe Location Top Of Machine Means Of Connecting The Unit Outlet With Flue Gas Emission Pipe Flanged Type Of Door Lock Provided Latch Lock Control & Functional Features Temperature Indicator Provided Yes Timer Provided Yes Auto Cut-Off Temperature Display Yes Digital Display To See Actual And Set Temperature Yes Minimum Burning Temperature (Degree C) 800 Burning Capacity Per Day (Number Of Napkins) 200-500 Burning Capacity At A Time (Number Of Napkins) 1-15 Residue Ash Per Napkin (Gms) 1 Gram Burning Time Of Full Capacity Napkins/Pads (Minutes) 10 Minute Skin Temperature Of The Unit Under Operation (Deg C) 0-15 Installation, Training, Demonstration And Plumbing Included Yes Electrical And Safety Features Automatic Digital Controller For Time Yes Automatic Digital Controller For Temperature Yes Equipment On/Off Indicator Provided Yes Power Supply 230V +/-10%, 50Hz, Single Phase, Ac Supply Electrical Power Consumption(Watt) 500-1000 Minimum Length Of Power Chord To Be Supplied Along With Machine (Mtr) 2 Meter Type Of Heater Ceramic Heater Containing Coil Power Saver (Auto Power Cut-Off) Yes Safety Mcb Provided (16A To 30A) Yes Protection Against Electric Shock When Checked As Per Is:302-1/2008 Yes Minimum Insulation Resistance (Ir) At 500 Vdc (Mega Ohm) 2 Maximum Electrical Insulation And Leakage Current As Per Is:302-1/2008, (Ma) 0.21 Maximum Earthing Continuity Test When Tested As Per Is:302-1/2008 (Ohm) 0.1 Hv Test At 1000 V Rms For 1 Sec When Tested As Per Is:302-1/2008 No Reakdown Shall Occur During The Test Smoke Control Unit (Scu) Type Of Scu (Smoke Control Unit) Top Mounted Material Of Housing Of Smoke Control Unit (Scu) Mild Steel(Crca) Cabinetfinish Of Ms Parts Of Scu Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Overall Height Of Scu (Mm) 300 Overall Width Of Scu (Mm) 301-500 Overall Depth Of Scu (Mm) 100-300 Number Of Chambers For Filteration Of Smoke Emission Two Both Carbon Control And Foul Odour Control Chambers For Filteration Of Smoke Emission Yes Number Of Filters In Carbon Control Chamber One Type Of Filters In Carbon Control Chamber Steel Mesh Filterr Number Of Filters In Odour Control Chamber One Type Of Filters In Odour Control Chamber Activated Carbon Filterblower Type Centrifugal, Direct Driven Blower Rpm 1800 Power Supply Of Spu 230V +/-10%, 50Hz, Single Phase, Ac Supplyminimum Length Of Flexible Emission Outlet Pipe To Be Supplied Along With Machine (Mtr) 3 Cost Of Additional Flexible Emission Outlet Pipe, If Required On Actuals To Be Paid By The User Yes Emission Standard For Smoke Conformity To Cpcb, Min Of Environment & Forests Standard Hazwams/30/2005-06 Yes Particulates (Half Hourly Average) (Mg/Nm3) (Max) 50 Hcl (Half Hourly Average) (Mg/Nm3) (Max) 50 So2 (Half Hourly Average) (Mg/Nm3) (Max) 200 Construction Of (Half Hourly Average) (Mg/Nm3) (Max) 100 Construction Of (Daily Average) (Mg/Nm3) (Max) 50 Total Organic Carbon (Half Hourly Average) (Mg/Nm3) (Max) 20 Hf (Half Hourly Average) (Mg/Nm3) (Max) 4 Nox (No And No2 Expressed As No2) (Half Hourly Average) (Mg/Nm3) (Max) 400 Total Dioxins And Furans ( 6 To 8 Hours Sampling Basis, Please Refer Guidelines For 17 Concerned Congeners For Toxic Equivalence Values To Arrive At Total Toxic Equivalence) (Ng Teq/Nm3) (Max) 0.1 Cd + Th + Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Hg And Its Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Sb+As+Pb+Cr+Co+Cu+Mn+Ni+V+Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.5 Loss On Ignition (Max) (% Dry Weight Of The Material) 5 Packing Packing Carton Box Marking And Instructions The Appliance Is Marked As Per Is:302-1/2008 Yes Certification Submission Of Test Report From Central Government /Nabl/Ilac Accredited Lab Specifically Containing Electrical & Electronic Parameters, Thermal Insulation Material Of Burning Chamber Etc In Addition To The Declared Specification Parameters At The Time Of Supply Yes Submission Test Report For Equipment For Compliance Of Flue Gas Emission And Ash Upon Combustion Of Sanitary Napkins/Pads To Central Pollotution Control Board (Cpcb) Norms From Nabl Accredited Lab At The Time Of Supply Yes Certification Available Eu-Cecertificate For Manufacturing Premises Available Iso Compliance Certificate Is To Be Furnished After Conducting Comprehensive Performance Test By The Supplier Yes Submission Of All The Certifications To The Buyer Along With Supplies Yesperformance Requirements Warranty (Yrs) 1 , Fully Automatic Coin Operated Sanitary Napkin Vending Machine -100 Pads Specification Sms Notification By Machine Yes Type Of Machine Automatic Type Of Fitting Wall Mountable Color Others Napkin Size For Loading Any Size Napkin Fold Trifoldoperating Features Coin Operated Multiple Coins Accepted Yes Number Of Napkins/Pads Provided/Loaded With The Vending Machine 4 Multiselection Of Napkin Type No Number Of Selection Options 1 Vending Option Vertical Accessibility For Free Vending Utility Service Na Type Of Loading Spiral Less Vending Napkin Individually Packed Yes Led Illumination Provided For Visibility Of Napkins In The Machine No Visibility Window No Pre-Programmable Facility Available Yes Maximum Storage Capacity (Nos)(Nos) 75-100 Digital Counter For Accounting No No Stock Message Display Available Yes Built-In Program For Automatic Coin Return/Reject System When There Is No Stock Or No Power Yes Built-In Program For Automatic Currency Block/Reject System When There Is No Stock Or No Power Yes Built-In Price Programming Software For Changing The Price Yessales Data Retrieval No Any Additional Built-In Features Available When There Is No Stock, Coin Will Not Be Accepted ,Shock Proof,Light Weight & Compact Design Functional Features Material Of The Outer Body Mild Steel(Ms)Type Of Battery Sealed Maintenance Free Lead Acid Built-In Charger No All Ms Parts Are Duly Painted By Powder Coating Mode Of Function Stand Alone Operating Power Source Electronic Input Power Supply 220V +/- 10%, 50Hz, Single Phase Ac Battery Backup Available No Battery Backup Time (Hrs) Na Power Consumption(Watt) 8 Dimensions Width (Mm) 200-400 Depth (Mm) 100-200 Height (Mm) 800-1000 Weight (Kg) 10-20 Thickness Of Ss/Ms Sheet (Mm) 1.2 Thickness Of Frp/Plastic Sheet (Mm) Na Warranty 0Ne Year , Sanitary Pads Specification Napkin / Pad Consists Of Outer Covering With Sufficient Number Of Channels For Leak Protection Yes Type Of Napkin Large Tabless Napkin / Pad Shall Have A Non-Absorbent Barrier On One Side Which Shall Have An Identifying Hread Or Marking Indicating Clearly The Side Of The Barrier Yes Adhesive Back Strip Yes Color Of Pad White Soft,Comfortable,Breathable,Odorless , Anti-Bacterial , Non-Allergic And Bio-Compatible,Bio-Degradable Yes Ph Of The Absorbent Material Of The Napkin As Per Is : 1390-1961 Yes Absorbency With Prescribed Fluid @50 Ml/Min Instead Of 30 Ml Of Cl 5 (1) Of Is : 5405/1980 (First Revision) Reaffirmed 2012, With Amendment 1, Without Leakage On Bottom And Sides Yes Disposability - Disposable Napkin /Pad With Covering Removed Shall Dis Integrate In The Water In Not More Than 5 Minutes When Immersed In 15 Litres Of Water And Stirred Yes Instructions Indicating Removal Of Non-Absorbent Barrier Before Flushing Of Napkin Yes Standard Conformity To Indian Standard Is: 5405-1980(Latest) Except For Absorbency And Size Yes Product Is Bis Marked No Cm/L No(If Product Is Isi Marked) 0 Dimensions Size Of Napkin (Length X Width X Thickness) (In Mm) (200+-10)X (75+-5) X (10 +-1.5) Weight Of Single Pad (In Grams) 9+-1 The Thickness Of The Pad Shall Be Average Of The Height Measured By Stacking 10 Complete Pads Yes Napkin / Pad Should Have Uniform Thickness Throughout Without Any Wrinkle Or Distortion Yes Material Material Of Inside Cover Rayon Absorbent Filler Material Cellulose Pulp Absorbent Filler Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material Yes The Covering Of The Absorbent Filler Shall Be Of A Good Quality Poly-Perforated Film Sleeve, Gauze Or Non-Woven Fabric With Sufficient Porosity To Permit The Assembled Pad To Meet The Absorbency Requirement Yes If Cotton Gauze Is Used For Covering Of The Absorbent Filler, It Shall Conform To Is 758-1975 Na Packing And Marking Primary Packing (No Of Pads In A Pack) 6 Type Of Primary Packing Polyethylene Bags Of Qualitative Material With Gsm 35-40 Printing On Primary Packing Include Logo In Four Colours Using Weather Proof Ink, Name, Manufacturers License No, Address, Length, Dimensions, Lot/Batch No, Date, Month And Year Of Manufacture, Date, Month And Year Of Expiry, Number Of Napkins, Advice For Storage And Any Other Printing Details Required By The Buyer As Per His Requirement Yes Secondary Packing Corrugated Box Of 5X120gsm Number Of Primary Packages In Secondary Package 125 Printing On Secondary Packaging Shall Include Generic Name Of Product, Lot/Batch No, Date, Month And Year Of Manufacture, Expiration Date, Month And Year, Manufacturers Name And Address, Consignee Address, Number Of Primary Packages, Gross Weight, Instructions For Storage, Disposal Instructions, Method Of Use And Indication As To Which Side Is Absorbent Etc And Any Other Printing Details Required By The Buyer As Per His Requirement Yes Ertifications Submission Of Form Central Govt/Nabl/Ilac Accredited Lab To Prove The Conformity To Declared Specification At The Time Of Supply Yes Certification Available Na , Ambu Bag General Type Self Filling With Air Usage Adult Utility Such As Clinic, Hospital, Ambulance Etc Clinic, Hospital Size Medium Colour Of The Bag Green Transparent Yes Flexible And Durable Yes Reusable Yes Autoclavable Yes Manual Resucitator Or Self-Inflating Bag Or Reservoir Bag For Positive Pressure Ventillating Yes Low Resistance Non-Breathing Expiratory Valve Available Yes Type Of Expiratory Valve Polysulphone Pressure Limiting Valve Available Yes Type Of Pressure Limiting Valve True Dimensions Maximum Bag Volume (Ml) 1000 Milliliter Length (Mm) 125 Millimeter Outer Diameter (Mm) 75 Millimeter Weight Including Patient Connector (Gms) 190 Gram Material Material (Medical Grade, Latex-Free, Non-Toxic, Non-Allergic And Antistatic) Silicon Rubber Functional Application Temperature 20 Deg C To 50 Deg C Yes Storage Temperature - 40 Deg C To 70 Deg C Yes Re-Breathing Bag Should Have An Expiratory Resistance Of 2 Point 2 Cms Of Water Yes Re-Breathing Bag Should Have An Inspiratory Resistance Of 3 Point 3 Cms Of Water Yes Re-Breathing Bag Should Have Controlled Flow Rates And Ventillation And With Reduced Airway Pressure Yes Port Available In The Bag To Connect With Oxygen Reservoir Yes Patient Connector Available Yes Type Of Patient Connector Psu And Silicon , 3 Seater Bench Steel Hevy Type Of Seating Separate Seat And Backrest Style With Arm And Backrest Seating Capacity (Nos) 3 Number Of Arms (Nos) 2 Delivery Status Knocked Down Supply To Be Assembeled By Seller On Site Seat Cushion Without Cushion Backrest Cushion Without Cushion Material Material Of Main Frame Mild Steel Material Of Seat And Backrest Mild Steel Material Of Arms Armrest Are Made Up Of Powder Coated High Pressure Aluminium Dye Cast Material Of Legs Powder Coated High Pressure Aluminium Dye Cast Legs Material Of Side Bar Bracket Made Up Of Chrome Plated Solid Steel Thickness Of Material Of Main Frame In Mm 1.8 Thickness Of Material Of Arms In Mm 1.5 Type Of Bolts M12 Bolts Thickness Of Pu Foam For Seat And Backrest ±2(Mm) N.A Density Of Pu Foam For Seat And Backrest ±2(Kg/Cubic Metre) N.A Covering Material For Seat And Backrest Na Dimension Overall Length In Mm (±10 Mm) 1840 Overall Depth In Mm ( ±5 Mm) 750 Overall Height In Mm (±5 Mm) 800 Seat Height From Floor In Mm (±5 Mm) 500 Mm Thickness Of Material Of Seat And Backrest (Mm) 1.2 Mm Certification Conforming To International Standard For Public Seating (*Bifma X 5 Dot 4 Or Equvalent) Yes Colour & Finish Colour Of Covering Material N.A All M S Strucure Finish Powder Coated Colour Of Paint Silver All Steel Component To Be Epoxy Powder Coated 50 Micron Thick Warantee Warantee Period In Number Of Years 1 Misc Seat And Backrest Are Perforated Yes Adjuster For Legs Yes Arms Chrome Plated Yes Legs Chrome Plated Yes Cushion On Arms No , Cushion Chair Tube Thickness - 1 Mm Tube Diameter - 16 Mm Weight: 5 Kg To 5.5 Kg Seat Material: Rexine Body Material: Steel Seat Color: Any Type Of Product: Visitor Chair Without Arms Style: Modern Primary Material: Metal Dimensions: 23 (L) X 21 (W) X 30 (H) Inch , Two Way Board One Side Black Board And One Side White Board With Magnetic Alphabets And Numbers , T-Shirts For Boys -Specification Utility: Unisex, Leeve Length ( Large Half Sleeve ), Depth Of Hemming/Binding At Neckline, Sleeve End And Bottom Binding 3 Cm, Material: Material ( Composition ), Polyester-42± 2%, Cotton-53± 2% And Lycra- 5± 1% ,Mass Of Material (G/ M²) 200 Gram, Knitting Interlock Knitted, Count Of Yarn (Ne) Double, Ph Value Of Aqueous Extract 6.0 To 8.0 ( Hot Method, As Per Is: 1390 ), Neck Binding / Collar Self Material, Bottom Hem ( Bottom Binding ) Self Material , Sleeve End Binding Self Materiallining Without Lining /Lining , Material 100% Polyester Mesh Mass Of Lining (Gram Per Square Meter) Not Applicable, Netting Mesh No Of Holes On Base & Bias Within 625 Square Millimeter Not Applicable Colour Of Mesh Lining Not Applicable Pattern Neck Type With Collars And Buttons Sleeve Type Set In Sleeve Full Sleeve Number Of Buttons In T Shirt With Collar Not Applicable Side Slit Without, Depth Of Side Slit ( In Case Of T Shirt With Side Slit) (Cm) Not Applicable Pocket Without Pocket, Size And Position Of Pocket ( In Case Of T Shirt With Pocket ) ( Width X Depth ) Not Applicable Stitching Sewing Thread 125 D Tex X 3, Polyester, Raw Edges, If Any Shall Be Bound By Overlock Stitching Yes Stitches Per Dm ( Min ) 36 Colour Colour As Per Buyers Requirements Colourfastness Of Fabric And Departmental Logo Colourfastness To Washing [Is/Iso 105-C10, Test- C (3)] Change In Colour - 4; Staining Of Adjacent Fabric - 4 Colourfastness To Perspiration ( Is 971 ) 4 Colourfastness To Rubbing ( Is 766) Dry - 4 / Wet - 4 Colourfastness To Light ( Is 2454 ) 5, Colour Fastness - Potential To Phenolic Yellowing Of Fabric 4 ( Test Method - Iso 105-X18:2007, Latest) Colourfastness To Washing ( Is/Iso 105-C10, Test- C (3))- Mesh Lining Change In Colour- 4; Staining Of Adjacent Fabric- 4 Colourfastness To Perspiration ( Is 971 )- Mesh Lining 4 Other Requirements Pilling Resistant [After 5 Hours Test As Per Is 10971 (Part 1)], Min 4 Dimensional Stability To Washing, Shrinkage Or Elongation Percentage, Max ( Is 2977 Latest), In Lengthwise And Width Wise Direction 3, Spirality, Percentage, Enumerable +/- 4 N/A Mandatory Max ( After One Wash ) ( Is/Iso 16322-1:2005 ) ( Washing As Per Iso 6330- 2A At 60 Degree C ±4, Label Tagless Logo And Marking Logo Marking As Per Grampanchayat / School/Anganwadi Requirements, Type Of Logo Embroidery Embroidery Thread For Logo Rayon , Pants For Boys -Specification Description Pants (Full Pants) For Anganwadi, Preschool,School Children/Boys Utility Utility Boys Size Size Large ( 0 To 18 Yrs ) Dimensions And Pattern Dimensions And Pattern As Per Sketch And Dimension Chart For Icds Pre-School Uniforms- Shorts For Children Of Anganwadi Centers In Gujarat, Furnished By Commissioner Of Women & Child Development, Gandhinagar, Gujarat ( Uploaded For Reference) Sketch And Dimensional Chart For Pre School Uniform- Shorts Has Been Seen And Understood Yes Material Fibre Composition (Warp & Weft) Polyester Staple Fiber (Psf) - 70% And Viscose - 30% (Tolerence ± 5%) ( Test -Method Is: 3416 , Part - 1 ) Count Of Yarn, Warp (Ne) 2/40S (Tolerence ± 5%) ( Test Method - Is: 3442 ) Count Of Yarn, Weft (Ne) 2/40S (Tolerence ± 5%) ( Test Method - Is: 3442 ) No Of Threads, Warp ( Ends Per Inch ) 64 (Tolerence + 5% / - 2.5%) No Of Threads, Weft ( Picks Per Inch ) 52 (Tolerance + 5% / - 2.5%) Mass ( Gram Per Sq Mtr ) 140G To 150G ( Test Method - Is : 1964 ) Weave Plain Stitching Sewing Thread 125 D Tex X 3, Polyester Stitches Per Dm 35 To 40 Raw Edges, If Any Shall Be Bound By Overlock Stitching No Colour Colour Any Other Colour As Per Buyers Requierment Colour Fastness To Light Change In Colour 4 Or Better ( Test Method - Is : 2454 ) Colour Fastness To Washing Change In Colour 4 Or Better , Stain On Adjacent Fabric 3 - 4 Or Better ( Test Method - Test C (3), Is / Iso 105 - C10 ) Colour Fastness To Perspiration Change In Colour 4 Or Better , Stain On Adjacent Fabric 4 Or Better ( Test Method - Is : 971 ) Colour Fastness To Rubbing Dry 4 Or Better , Wet 3 Or Better (Test Method - Is : 766 ) Other Requierments Pocket 2 Side Pockets Waist Band The Shorts Should Have Elastic For Full Portion Of Waist Band Logo And Marking Logo Marking No Type Of Logo Not Applicable Number Of Logos Not Applicable Size, Design And Location Of Logo As Per Buyers Requirement Yes , Socks For Boys And Girls -Specification Product Description Socks Nylon For Gents, Ladies And Childrens (As Per Indian Standard Is: 5084: 1990: Latest) Size Medium (As Per Ind) Colour Colour Other Colors As Per Buyers Requirement Other Colors As Per Buyers Requirement Yes Construction Type Of Knitting Fancy- Knitted (As Per Is Specification) Pattern Of Stitches (Only For Rib And Fancy Knitted Socks As Per Is) Na Kintting Structure Single Cylinder Heel And Toe Single Heel And Toe Top Of The Socks Plain Knitted Diameter Of Machine (Mm) (As Per Is) (Mm) Gauge Of Machine (As Per Is) (Number Of Needles/ Inch) 12 To 14 , Shoes For Boys -Specification Closure Velcro/Less/Slip On Care Rub Gently With A Damp Cloth And Mild Soap Occasion Formal Outer Material Pvc Sole Material Pvc Colour Black Unisex For Boys A Type Shoes Shoe Width: Medium Material Type: Synthetic Lifestyle: Casual , Shoes For Girls -Specification Closure Strap/Slip On Care Rub Gently With A Damp Cloth And Mild Soap Occasion Formal Outer Material Pvc Sole Material Pvc Colour Black Unisex For Boys A Type Shoes Shoe Width: Medium Material Type: Synthetic Lifestyle: Casual , Desk Bench Fibre For Kids Product Description Colorful Study Table For Childrens. Study Table Comes With Vibrant Colors And It Is Made Of Safe Plastic Material.With This Desk Get An Learning And Educational Feel In Atmosphere.Key Features This Table And Chair Combo Is Perfectly Sized For The Kids It Is Made Of High Quality Plastic Material, Which Is Safe And Durable. Kids Will Love To Sit And Study On The Intellect Desk Specifications Brand - Playgro Toys Type - Desk And Chair Set Carrying Capacity - Up To 20 Kg Color - Red Yellow Dimensions - 71 X 73.5 X 62.2 Cm Age - 3 To 8 Years Material - Plastic Items Included 1 Desk And Chair Set , Metal Tricycle Garbage Rickshaw Color Green, Blue, Etc Capacity 480Kg Type Garbage Length 1280 Mm , Lagori Set Material Type(S) Wood Color Multi Item Weight 499 G Package Dimensions 26.5 X 9 X 7.9 Cm With Rubber Ball , Cricket Bat Standarad , Cricket Ball Standarad , Stump Set Standarad , Skipping Rope Standarad , Badminton Set Standarad , Football Standarad , Volleyball Shape Shape Of Volleyball ( When Inflated ) Spherical Dimensions And Mass Circumference 65 Centimeter Weight 260 Gram Material Material Of Case ( Outer ) Synthetic Leather Thickness Of Material Of Case 2 Millimeter Material Of Inside Bladder Rubber Material Of Bladder If Other Than Rubber False Stitching Thread Linen Stitching Thread As Per Is 417 Part 2 Any Other Stitching Thread As Per Buyers Requirements Yes , Volleyball Net Mater+B14ial Of Net Cord Cotton Breaking Strength Of Cord As Per Is 3345 Not Applicable Circumference Of The Cord Of Net 9.5 Millimeter Rope/ Cord To Tie With Post On Both Sides Nylon Breaking Strength Of Rope/ Cord ( Min ) As Per Is 3345 Not Applicable Material Of The Band At Top, Bottom And Sides White Canvas Material Of Flexible Cable Inserted In The Top Band To Fasten The Net To Posts And Keep Its Top Taut Na Dimensions Length Of Net 9.5 Meter Width Of Net 1 Meter Width Of The Two Fold Band At Top 7 Centimeter Width Of The Two Fold Band At Bottom Through Which A Rope Is Threaded 5 Centimeter Width Of Two- Fold Side Band 5 Centimeter Length Of Net On Each Side Of Side Bands 25 Centimeter Size Of Mesh Size Of Mesh ( Square ) Max 10 Centimeter Colour Colour Of Net As Per Requiremetn , Flying Ring Concept Of Toy This Light Weight Toy Provides Endless Variety Of Activities And Games To Children Configuration Having Flying Disc - Upper Side Of The Disk Imbossed/Engraved With Number/Alphabet/Picture (To Attract The Child) : As Reference Representative Image Uploaded Colour Of Flying Disc Any Style Of Upper Side Of Disk Engraved Upper Disk Designed (Embossed / Engraved) With N.A Approval Of Advance Sample Before Bulk Supply No Advance Sample Material Plastic Fruits And Vegetables Made Up Of Non Toxic Virgin Plastic Virgin Polyethylene Terephthalate Dimension & Mass Approximate Outer Diameter 300 Mm Approximate Weight Of Flying Disc 190 Gms. Colour-Finish & Packing Made-Up Ingredients Should Not Be Harmful To Kids Yes Colour And Finish (Other Indeterminable Parameters) N.A The Complete Set Should Be Properly Packed That It Should Not Damage During Transit Yes Flying Disk Big Should Not Have Sharp Edges Or Corners (Safety Point Of View) Yes , 1 Pairs Dandia Sticks For Traditional Games In School/Anganwadi(Multicolor) (14 Inch) Product Specification Name Of The Product Category Wood Crafts / Wood Carving Name Of The Subcategory Wooden Handicraft Name Of The Product Dandiya For Garba Ku Code Sku Code 390 Description Description 1 Pair Dimensions Dimensions ( Mm ) 14 Inch Mass Mass Material Material Wood , Side Drum , Javelin Stick(Bhala Normal)Dimensions Length Of Antenna 1.8 Meter Diameter Of Antenna 10 Millimeter Colour Colour Of Antenna Antenna Is Marked With 10 Cm Stripes Of Red And White Colour Alternatively. Standards And Certifications Product Generally Conforming To Is 3345- 1989 Latest No Product Confirming To International/ National Federation Requirements Like International Volleyball Federation ( Fivb )/ Volleyball Federation Of India ( Vfi ) Yes Certification From International/ National Federations Like International Volleyball Federation ( Fivb )/ Volleyball Federation Of India ( Vfi ) Yes Date Upto Which Certification Is Valid No Warranty Warranty 1 Year Advance Sample Agree To Provide Advance Sample(S) For Buyers Approval Before Commencement Of Supply Yes , Shot Put (Gola Normal) Utility Competition Material Of The Ball Cast Iron Mass And Diameter Of Shot Put- Competition Mass- 3.005 To 3.025 Kg, Diameter- 85 Mm To 110 Mm ( 3 Kg Shot Put ) Product Generally Conforming To Is 4386: 1988, Latest Yes Product Confirming To International/ National Federation Requirements That Is International Association Of Athletics Federations ( Iaaf )/ Athletics Federation Of India ( Afi ) Yes , Lezim 1 Piece Lezim / Lazium Equipment. Product Dimensions: 33 X 2 X 2 Cm Repeatedly Used In School Dance, Military And Other Organizations As A Fitness Drill Best Sports And Entertainment Tools For Exercise And Entertainment Purposes All Material Used Steel And Wire Is Broad And Plat Is Heavy Steel Number Of Puzzle Pieces 1 Batteries Required No Material Type(S) Wood & Steel Color Multi Item Weight 200 G Product Dimensions 6 X 6 X 33 Cm , Chess Set Description Chessboard With Chess Pieces Dimensions And Mass Size ( Length X Width ) Chess Board 32 Centimeter Size Of Square In Chess Board 4.5 Centimeter Mass Of Chessboard ( Gram ) 100 Pieces Total Chess Pieces Total 32 Pieces Are Used For Playing Chess. Each Player Has 16 Pieces: 1 King, 1 Queen, 2 Rooks, 2 Bishops, 2 Knights And 8 Pawns. Height Of Pieces King - 9.5 Cm, Queen - 8.5 Cm, Bishop - 7 Cm, Knight - 6 Cm, Rook - 5.5 Cm And Pawn - 5 Cm. (These Dimensions May Differ Up To 10% From The Above Recommendation, But The Order (E.G. King Is Higher Than Queen Etc.) Must Be Kept) Diameter Of Pieces Base 40-50% Of Its Height. Material Material Of Chess Board Cardboard Material Of Chess Pieces Hard Plastic Colour Colour Of Chessboard The Colors Of The 64 Squares Alternate In Colour I.E Light And Dark Squares. Colour Of Black Pieces Black Colour Of White Pieces Cream Other Requirement Strong And Durable Yes Style Of Pieces Staunton Foldable Type Yes Provision For Storage Of Chess Pieces In Chess Board Magnetic Attraction Between Chessboard And Pieces No , Carrom Board With Carrom Man, Striker And Powder Size 26X26 Shape Shape Of Carrom Board Square Playing Surface Of Carrom Carrom Playing Surface Material Lacquered Plywood Size Of Playing Surface (Side Of Square) 73.5 Cm To 74 Cm Thickness Of Playing Surface (Min) 8 Mm Carrom Playing Surface Is Waterproof Yes Surface Finish Completely Smooth (Carrom Board Shall Be Able To Have At Least Three And A Half Runs Of A Normally Smooth Striker Of 15 Gms Weight, When Struck With The Maximum Force, From One Of The Base Lines, To The Opposite Frame Of The Carrom Board.) Carrom Frame Material Of Carrom Frame Any Other Hard Wood With Good Resistance Carrom Frame Breadth 7.2 Centimeter Carrom Frame Height From Playing Surface 2.54 Centimeter Corners Of The Frame Corners Which Are Adjoining The Playing Surface Are Inside Curved Bracing Suitable Bracings Shall Be Provided Underneath The Playing Surface And Fastened With The Frame. Pockets Of Carrom Pockets At Four Corners Pockets Should Be Round Inwardly And 4.45 Cm In Diameter With Admissible Variation Of Not More Than 0.15 Cm Pocket Net Each Pocket Net Shall Have Capacity Of Holding At Least 10 Coins Marking On Playing Surface Of Carrom Board Base Line Two Straight Lines, Black In Colour, Of 47 Cm (± 0.30 Cm) Each In Length On All Four Sides Of The Playing Surface, Parallel To The Frame. The Lower Of These Two Lines, Which Shall Be Between 0.50 Cm And 0.65 Cm In Thickness, Shall Be 10.15 Cm Away From The Frame And The Other One 3.18 Cm Away From The Lower Part Of The Base Line. Base Line Circles The Base Lines Shall Be Closed By Circles Of 3.18 Cm In Diameter At Both Ends. Within This Circle A Portion Of 2.54 Cm In Diameter Shall Be Coloured In Red. These Shall Be Drawn So As To Touch Both The Base Lines And Also The Upper Base Lines Of The Adjacent Side When Imaginably Extended. The Distance Between The Base Circle On One Side And That Of The Other May Be 1.27 Cm Approximately. Arrows Four Arrows, Black In Colour, Of Not More Than 0.15 Cm Thickness Shall Be Drawn At Each Corner Of The Carrom Board At An Angle Of 45 Degrees To Any Of The Adjacent Sides And Each Of Them Shall Pass Through The Gap Between The Two Base Circles And Point Towards The Centre Of The Pocket Leaving A Clear Distance Of 5.00 Cm From The Edge Of The Pocket. The Length Of The Arrows Shall Not Exceed 26.70 Cm. A Decorative Arch Of 6.35 Cm In Diameter With Pointers At Both The Ends, Drawn At The Starting Point Of The Arrows Leading Towards The Pocket, Is Permissible. Centre Circle Exactly In The Centre Of The Carrom Board There Shall Be A Circle Of 3.18 Cm (± 0.16 Cm) In Diameter Drawn Black In Colour. Circle Shall Be Filled In Red Colour.Outer Circle A Circle Of 17.00 Cm (± 0.30 Cm) In Diameter With The Centre Point Of The Carrom Board As Its Centre, Black In Colour. Any Decorative Design In The Circle Is Permissible. , Rubber Ring Approximate Diameter Of Outer Ring 150 Mm Approximate Diameter Of Inner Ring 90 Mm Weight Of Ball With Tolerance Of (-) 10 Gms N.A Weight Of Ring With Tolerance Of (-) 10 Gms 100 Gms. , Wall Fantype Of Fan Mounting Bracket Mounted Fan For Wall Mounting, Method Of Mounting On Fan Base Oscillating, Type Of Fan Motor Non-Capacitor Type, Fan Size 400 Millimeter, Minimum Air Delivery (Cubic Meter/ Min) 65 For 400Mm, Maximum Input Power For Capacitor Type Fan (Watt) 61 For 400Mm, Maximum Input Power For Non - Capacitor Type Fan (Watt) 73 For 400Mm, Ingress Protection For Fan Motor And Regulators Ip 21, Generic Motor Type Ac Type Of Enclosure Of Motor And Regulator Ventilated, Class Of Insulation For Fan And Regulator Class Ii , Rated Voltage 220V Ac Speed Control Mechanism Pull Cord Or String Based Control , Rpm At Maximum Speed 1325, Number Of Blades 3 , Material Of Blade Aluminiums, Body Colour Any, Blade Colour Any ,Fan Guard Yes Fan Guard Material Powder Coated Metal Wire Number Of Speed Steps 3 Adjustable Vertical Tilt Yes Angular Movement 180 Degree, Length Of Cord With Suitable Plug Top (Inclusive In The Scope Of Supply) 2 Meter, Additional Features, If Any High Speed , List Of Items And Quantity Of Each Item Included In The Offer Wall Mounted Clip , Gas Bhatti Single Burner- General Fuel Type Lpg Material Body Material Stainless Steel(304) Leg Material Stainless Steel(304) Shape,Design & Colour Top Shape Square Number Of Burner 1 Regulator With Step In Regulator 1 Stove Leg Withleg Shape Square Pipe Stove Wheel No Number Of Wheel Na Wheel Brake No Finish Polished Dimensions Overall Length(In Mm) 300-320 Overall Width(In Mm) 301-320 Overall Height(In Mm) 300-320 Burner Diameter(In Mm) 50-60 Wheel Diameter(In Mm) 121-130 Ss Sheet Body Thickness(In Mm) 0.61- 0.7 Pipe Size(In Mm) Dia 20 Pipe Thickness(In Mm) 0.8- 0.9 Leg Height(In Mm) 41-50 , Desk Bench For Kid 6 To 10 Yrs Generic Type Of Desking Integrated Desk Cum Seating With Shelf / Storage Under Desk Desking Configuration Three Seater Length Of Desking, Seating And Backrest (If Provided) In Mm (±10 Mm) 1500 Desk / Bench Specifications Material Of Desk Top +/- 2 Mm (For Shelf / Storage +/- 4 Mm) 20 Mm Thick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Or Side Pannel Ss 202 Structure Height Of Desk Top In Mm (±5 Mm) 700 Width Of Desk Top In Mm (± 5 Mm) 400 Seating Specification Material Of Seat And Backrest (If Provided) (+/- 2 Mm (For Back Rest +/- 4 Mm) 20 Mm Hick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Ss 202 Structure Material Of Seat Cushion Without Cushion Width Of Seating In Mm (±10 Mm) 300 Height Of Seat In Mm (±10 Mm) 460 B193width Of Backrest If Provided In Mm (± 5 Mm) 280 Back Support For Seating Of Same Materail As Seating Provided Without Cushion Misc Design As Per Dgs&D Drawing No Dqa/Ge/Rc-208/Schedule 19 (Drg 1,2,3,4,5,6,7,8,9,10) Can Be Configured As Per Buyers Choice Within Offered Technical Details Colour Of Finish As Per Buyers Choice Desk Top Finishing Two Long Sides Shall Have Post Form Half Round Profile And Other Two Sides Edge Banded With 2 Mm Thick Pvc Tape With The Help Of Hot Melt Glue , Desk Bench For Kid 10To 16 Yrs Generic Type Of Desking Integrated Desk Cum Seating With Shelf / Storage Under Desk Desking Configuration Three Seater Length Of Desking, Seating And Backrest (If Provided) In Mm (±10 Mm) 1500 Desk / Bench Specifications Material Of Desk Top +/- 2 Mm (For Shelf / Storage +/- 4 Mm) 20 Mm Thick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Or Side Pannel Ss 202 Structure Height Of Desk Top In Mm (±5 Mm) 700 Width Of Desk Top In Mm (± 5 Mm) 400 Seating Specification Material Of Seat And Backrest (If Provided) (+/- 2 Mm (For Back Rest +/- 4 Mm) 40 Mm Hick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 1 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Ss 202 Structure Material Of Seat Cushion Without Cushion Width Of Seating In Mm (±10 Mm) 300 Height Of Seat In Mm (±10 Mm) 800Mm B193width Of Backrest If Provided In Mm (± 5 Mm) 280 Back Support For Seating Of Same Materail As Seating Provided Without Cushion Misc Design As Per Dgs&D Drawing No Dqa/Ge/Rc-208/Schedule 19 (Drg 1,2,3,4,5,6,7,8,9,10) Can Be Configured As Per Buyers Choice Within Offered Technical Details Colour Of Finish As Per Buyers Choice Desk Top Finishing Two Long Sides Shall Have Post Form Half Round Profile And Other Two Sides Edge Banded With 2 Mm Thick Pvc Tape With The Help Of Hot Melt Glue , Amplifire 800 Watt Power Output 1150W Rms Max., 800W Rms At 10%Thd, 770W Rms At 5% Thd 725W Rms At 2% Thd Output Regulation = 2Db, No Load To Full Load At 1Khz Input Channels 1 × Mic 1Mv / 4.7K?, 1 × Aux 100Mv / 470K?, 1 × Aux 250Mv / 20K?, 1 × Cd 250Mv / 20K?, 1 × Line 1V / 20K? Frequency Response 50Hz-18,000Hz ±3Db Signal To Noise Ratio 60Db Tone Controls Bass (100Hz) : ± 8Db, Treble (10Khz) : ± 8Db Line Output 1V/1K? Speaker Output 2O, 4O & 8O , Speaker Box 700 Watt Pairinput Power 700W Rms Configuration Two Way Frequency Response 40-20,000Hz Components 2 × 15 Lf Speaker, 16 × 7 Dynamic Hf Unit Special (1W/1M) 103Db Max. Rated Special 131Db Nominal Impedance 4O Crossover Frequency 2Khz Port Free Flow Flared Input Connectors 2 Nos. Of Speakon Sockets Dimensions W530 × H1210 × D510mm Weight 65.00Kg , Sound Mixer For Amplifier Power Requirement Ac: 220-240V 50/60Hz, Dc: 12V (1×12V Car Battery) Outputs 2 × Preamp 200Mv/600O, 4 × Line 1V/1K?, 1 × Headphone 120Mv@ 8O Frequency Response 20-20,000Hz (±3Db) Distortion 1% Signal To Noise Ratio 50Db Input Channels 12 × Mic 0.6Mv/4.7K?, 2 × Aux 100Mv/470K?, 1 × Aux 500Mv/100K? Tone Controls Bass: ± 10Db At 100Hz, Treble: ± 10Db At 10Khz Dimensions W350 × H145 × D200 Mm Weight 3.9Kg , Pa Music Horn Input Power 40W Rmspower Taps 40/20/10/5W Impedance 250/500/1K/2K? Frequency Response 120-16,000Hz Special At 1Khz 98Db/1W/1M; 114Db/40W/1M Dimensions W370 × H255 × D300 Mm Weight 6.5Kg Material Abs (Uv Protected) , Mice Stand Type Floor Stand Height 920-1500 Mm Base Dia 230 Mm Weight 4.41Kg , Wireless Mic Type Wireless Form Factor Collar (Lapel) If Wireless, Operating Range (Meter) 30 Meter If Table Top, Length Of Goose-Neck (Mm) 0 Millimeter Polar Pattern / Directionality Cardioid Microphone Transducer Type Condenser Inbuilt Speaker No Frequency Response (Hz) 20-20,000 Hz Equivalent Noise Level (Dba) 15 Signal To Noise Ratio (Db) 15 Electrical Impedance (Ohm) 0Sensitivity -50 Dbv/Pa (3.15 Mv)Led Indicator Availableon/Off Switch Availablevolume Control Yesaudio Connector Type Xlrcasing Material Plasticpower Source Acoperating Temperature Range (Degree C) 5 Operating Humidity (Rh%) 80Dimension (W X H X L) (Mm) 210 X 42 X 152Net Weight (Gram) 250 Gramwarranty (Years) 1 , Wired Mic Specificationtype Wired Form Factor Handheld If Wireless, Operating Range (Meter) 0 Meter If Table Top, Length Of Goose-Neck (Mm) 0 Millimeter Polar Pattern / Directionality Cardioid Microphone Transducer Type Dynamic Inbuilt Speaker No Frequency Response (Hz) 20-20,000 Hz Equivalent Noise Level (Dba) 14 Signal To Noise Ratio (Db) 12 Electrical Impedance (Ohm) 14 Sensitivity -54.5 Dbv/Pa (1.85 Mv) Led Indicator Not Available On/Off Switch Available Volume Control No Audio Connector Type Xlr Casing Material Plastic Power Source Dc Operating Temperature Range (Degree C) 34 Operating Humidity (Rh%) 34 Dimension (W X H X L) (Mm) Na Net Weight (Gram) 1.56 Gram Warranty (Years) 1 , Xlr To Aux 6.5 Mm Cable Xlr Female To 1/4 Ts Cable Is Made Of 100% 4N Ofc For Effective Emi And Rfi Rejection And Flexibility, Extremely Provide Low Fidelity Attenuation During The Long Distance Transmission. ?Hi-Fi Quality?: The Microphone Cable Has Double Shielding (High Density Bc Braid Shielded + Aluminium Foil) Can Provide High Stable Performance And Lowest Loss During The Transmission. Heavy Duty Alloy Metal & Gold-Plating Connectors Increase Durability , Anti-Oxidant, Plugging And Unplugging 6,000 Times To Deliver Pristine Sound. ?High Performance & Rohs Pvc?: The Furui Xlr Female To 6.35Mm 1/4 Ts Cable Has High Resistance Tensile Strength Rohs Pvc Insulation Improves High Frequency Response, Extreme Resistance To High And Low Temperature 14? - 572?(-10?-300?). ?High Strength Nylon Braid & Tensile Resistance Cotton Yarn Wrap?: Ours Microphone Cable Use High Strength Nylon Braided Support 20 - 25 Kg Pulling Force, High Resistance Tensile Strength Cotton Yarn Wrap Provides Amazingly Superior Clarity And The Highest Cancellation Of Noise And Rf Interference. And Ours Xlr Female To 1/4 Ts Cable Is Very Flexible, 23 Awg, Od 6.5 Mm (0.256 Inch), Can Bent 90 Degree. , Cymbal /Zanj Band Pair Cymbal Type Clash Cymbal Material Nickel, Silver Plated Size 20 Inch , Mop / Pocha Package Mop 1, Mop Head 2, Liquid Dispenser Mop Comes With Microfiber Mop Head Works Great Wet Or Dry Banded Strands Make The Mop Super-Absorbent Mop Cleans Easily Around And Under Furniture, In The Bathroom And Along Baseboards And Other Hard-To-Reach Places Keeps Your Hands Out Of Dirty Water Mop Head Disengages With Your Foot So Your Hands Never Have To Touch The Mess Handle Angle May Be Adjusted From 45 To 180 Degrees For The Most Comfortable Mopping Position Mop Head Is Machine , Nail Cuitter For Kids 0 To 12 Yrs Key Features: Stainless Steel Blunt Edge Avoid Hurting Your Babys Skin Easy To Clean Specifications Type - Nail Clipper Age - 2 To 4 Years Package Dimension - 12 X 7 X 5 Cm Product Dimension - 12 X 7 X 5 Cm Weight - 70 Gm Items Included In The Package 1 Nail Clipper The Baby Nail Clipper Are Made In Stainless Steel. It Has Curved Blade With Rounded Ends To Ensure Complete Safety During Use. They Come With A Cover To Hygienically Protect The Blades When Not In Use. The Front Part Of The Scissors Is Round Shape Designed. , Pencil Type And Grade Type Of Pencil General Writing Grade Hb Physical Properties Length Of Pencil (Mm) 177 No. Of Pencils In One Pack (Nos.) 10 Shape And Color Shape Of Pencil Hexagonal Body Colour Blacl Gray , Eraser-Soft And Smooth Erases Graphite Gently Without Damaging Paper Picks Up Dust While Erasing , Sharpner Body Material Plastic / Metal Blade Material Metal Blade Length (Mm) 10 Blade Width (Mm) 5 Diameter Of Sharpening Hole (Range) 9Mm-10Mm Sharpening Holes Singl , Type Ofregisters Plain Register Dimension Of Paper (Length X Width) (Mm X Mm) 148 X 210 Dimension Of Cover (Length X Width) (Mm X Mm) 160 X 215 Grammage Of Paper (Gsm) 70 Grammage Of Cover Paper (Gsm) 150 Brightness Of Paper (%) 72 Smoothness Of Paper (Bendtsen) (Ml/Min) 120 Opacity (%) 80 Number Of Pages 200 Type Of Binding Softcover Cloth Bound Content And Desciption General Format , Two Way Board (One Side Black And One Side White Board Inclidoing Magnetic Alphabets And Numbers) , Cob Web Brush Ape Of Brush Round & Curved Cobweb Brush Head Detachable Type Of Stick Telescopic Material Material Of Bristles Plastic Material Of Stick Plastic Dimensions Length Of Bristle (Mm) 100 Overall Length Of Brush Head (Mm) 225 Length Of The Stick (Full Open) (Mm) 2500 Overall Weight Of Cobweb Brush 170 , Wooden Speech Podium / Lecture Stand/Dias: Mode Of Supply Assembled Ready To Use Frame Type Free Standing Understructure Of Podium Gable End And Modesty Panel Storage No Storage Shelves Without Shelves Reading Surface Angled Surface Top Position Fixed Paper Stop No Wire Management Without Number Of Socket Box 0 In Built Sockets For Lan / Internet No Type Of Socket Box No Socket Box Material Podium Top Material Mdf Board Of Grade Sbg Ii Of Is 12406/Latest Gable End And Modesty Panel Material Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-23 Of Is 14587/Latest Leg Material Teak Wood Misc Podium Top Long Sides To Be Post Form Half Round Profile With Corner Edge Bending Podium Top Plain Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Gable End And Modesty Panel Plain Side N.A Number Of Buffers Provided N.A Dimension Thickness Of Podium Top ±2Mm 12 Millimeter Thickness Of Gable End And Modesty Panel ±2Mm 12 Millimeter Length Of Podium Top ±10Mm 600 Millimeter Depth Of Podium ±10Mm 500 Millimeter Height Of Podium ±10Mm 1100 Millimeter Presenter Side Height ± 10Mm 1050Mm Dimension Of Leg (Mmxmm) ±5Mm No Legs Shelves Width Of Shelves ±10Mm N.A Depth Of Shelves In Mm (±10Mm) Na Footrest Material Of Footrest Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-22 Of Is 14587/Latest Length Of Footrest ±10Mm N.A Depth Of Footrest ±10Mm N.A Height Of Footrest (Front / Back) ±10Mm N.A Finish Of Exposed Edges To Be Banded With 0.5-1.0Mm Thick Pvc Tape With The Help Of Hot Melt Glue Material Thickness Of Footrest ±2Mm N.A Colour & Finish Podium Top Finish Laminate In Colour With Swede Finish 0.6-0.8Mm Thickness Of Type S,F Or P Having Index No.3.2.3 Conforming To Is 2046/Latest With Having Balancing Laminate Of 0.5Mm Thick On Other Sidetable Top Shade Peach Warranty Warranty Period In Number Of Years 1 , Pa Driver Units Weatherproof And Rugged Construction. High Spl, Crisp Penetrating Sound. Voice Coils Precision-Wound On An Aluminium Bobbin For Efficient Heat Dissipation. Degree Of Protection Ip 66 Provided, When Mounted On A Reflex Horn, Against Foreign Particles Such As Dust And Jets Of Water Thus Making Them Ideal For Outdoor Use. Meets En 60529.Input Power 60W Rms/90W Max. Impedance 16O Frequency Response 160-7,000Hz Special At 1Khz 113.5Db/1W/1M, 132Db/60W/1M Temperature Range -30°To + 70°C Throat Coupling 1-3/8 - 18Tpi, Throat Couple No.1 Dimensions Ø125 X H100 Mm Weight 2.05Kg Material Die-Cast Aluminium Acoustic Head (Flange) , Pa Trumpet Horn-Heavy Duty Aluminium Trumpet Is Ideal For Most Of The Large Outdoor Installations. Rugged Construction And Fitted With A Protective Pvc Ring On The Flare. Acoustically Well Designed, It Matches Ahuja Driver Units For An Efficient, Powerful And Clear Sound.Bell Dia 22 Cut-Off Freq. 160Hz Weight 2.27Kg , Amplifire Ideally Suited For A Wide Variety Of Music And Public Address Applications.6 Mic & 2 Aux Inputs.Built-In Mp3 Player With Lcd Display, Remote Control, For Usb, Sd/Mmc Cards.Preamplifier And Line Output For Connecting To A Booster Amplifier And For Recording The Programme.Line Input For Connecting The Output From Any External Mixer Or Permittingamplifire To Be Used As A Booster Power Amplifier Resettable Circuit Breaker For Protection Against Overload And Short Circuit.Instant Transfer To Dc Power (2Ã- 12C Car Battery) If Ac Power Fails.Box Speaker/Driver Unit Selector Switch. Bass Boost Defeated At Driver Unit Position For Safer Operation Of Driver Units. , Mic Microphone Cable 100M Material Plastic Branded Color Black Size 100M Power Source Electric Pack Type Box 2*(28/0.08Mm Bc+1/Tinsel Copper+1.75Mm Pvc)+Filling Cotton Yarn+Alp+112/0.08Mm Bc Braid +5.8Mm Pvc , Mic All Purpose Pa Microphone Reproducing Intelligible, Crisp And A Bright Sound. Suitable For Multi-Purpose Pa Installations. Supplied With Quick Detachable Holder With 3-Pin Professional Xlr Connector & 6 Mtrs. Twin Core Shielded Low Noise Cable. , P A Speaker ? 100 Watts ? Pa Speaker System ? A Compact Superior Quality Speaker System Comprising Of A Single 12 Full Range Dual Cone Speaker And A Piezo Horn Tweeter. The System Is Outstanding For Its Ability To Handle 100W Continuous Power With Undistorted Response And Is Ideal For Small Pa Applications. ? The Speakers Are Housed In A Rugged Closed Box Enclosure Made Of 18Mm Board, And Carpet Covered. ? 16.70Kg ? 12 Months Warranty , Mic Stand Microphone Stand Employ Sturdy Mechanism Ensuring Trouble Free Movement And Positioning Of Microphone. These Stands Are Functional And Resistant To Rust, Due To Superior Quality Of Chrome Plating/Powder Coating. Ahuja Stand With 5/8 27 Tpi To Match All Microphones.Type Floor Stand Height 920-1500 Mm Base Dia 230 Mm Weight 4.60Kg , Map 8 Nos Set As Following 1 Chikhali Taluka,2 Buldana District, 3 Maharashtra State, 4 India Country, 5 World Map, 6 Natural Map Of Maharashtra, 7 Social Map Of Maharashtra, 8 Political Map Of Maharashtra , Hand Held Digital Infrared Medical Thermometer For Measuring Body Temperature General Features Product Description Hand Held Digital Infrared Medical Thermometer For Measuring Body Temperature Purpose Infrared Thermometer Is A Quick And Easy-To-Use Method To Measure Body Temperature Suitable For All Age Group Product Information Type Of Thermometer Non Contact Infrared Thermometer Body Material Of Ir Thermometer Abs Color Of Device White Ergonomic Design Yes Temperature Display Unit Degree Celsius & Degree Fahrenheit Primary Measurement Mode Body Temperature Mode Measuring Site For Body Temperature Ear & Forehead Lowest Measurable Temperature For Body Mode 32°C (89.6°F) Or Lower Highest Measurable Temperature For Body Mode 42°C (107.6°F) Or Higher Accuracy Of Measurement For Body Temperature In °C (±) 0.2 Degree Celsius Accuracy Of Measurement For Body Temperature In °F (±) 0.5 Lowest Measurable Temperature For Room Temperature Mode 0°C (32 °F) Or Lower Highest Measurable Temperature For Room Temperature Mode 50°C (122 °F) Or Higher Sensor Type Thermal Sensor Display Resolution 0.1°C/0.1°F Response Time 1 Second Measuring Distance For Non Contact Type Ir Thermometer 5 Cm Or Better Number Of Recent Readings That Can Be Stored 10 Built-In Laser Pointer Weight Of Device With Battery 150 Gram Dimensions Of Device (Mm X Mm X Mm) 150X75x40 Display Display Type Lcd Display Backlit Display Yes Display Size 1.5 Inch Features Features Available Interchangeable Celsius & Fahrenheit Modes,Low Battery Indicator,Auto Power On,Trigger/Button For Operation,Auto Power Off When Not In Use,Display Of Previous Reading On Screen With Current Reading,Sound Indication When The Thermometer Is Ready To Take Or Show The Temperature,Audible Alarm For Fever,Different Backlight Colours To Differentiate Between The Fever Ranges,Silent Mode,Auto Hold Function,Waterproof Lens Easy To Clean And Disinfect,Data Transfer Facility Of Other Devices Through Usb/Bluetooth/Wifi/Rs 232,Limit Value For The Adjustable Alarm As Programmable Power Source Power Source Non Rechargeable Battery Battery Chemistry Li-Ion Battery Size, If Non Rechargeable Battery Aaa Number Of Batteries Required For Operation 2 Number Of Batteries Supplied (Inclusive In The Scope Of Supply) 2 Nominal Voltage Of Each Battery (V) 1.5 , Finger Tip Adult And Pediatric And Neonatal Pulse Oximeter Performance Parameters Type Of Pulse Oximeter Finger Tip Should Work During Motion And Very Low Perfusion Conditions Yes Special Signal Processing Technology (Motion Artifact Rejection) Nellcor Compatible Spo2 Probes Disposable Oxygen Saturation Range 0-100% Pulse Rate 25-240 Bpm Display Of Spo2 And Periodical Renewal Digital Display With Bar Graph Accuracy ± 5 % Type Of Patient Adult,Pediatric Should Be Shock Proof Yes Display (With Contrast Adjust-Ability) Lcd Display Should Be Readable From At Least 3 Feet Yes Saturation Displayed On The Screen No Pulse Rate Displayed On The Screen Yes Perfusion Index Displayed On The Screen Yes Status Of Battery Charging Displayed On The Screen Yes Sensor Off /On Status Yes Audible And Visual Alarms Yes Alarm Override Facility Should Be Present Yes Trends 72 Hrs Type Of Trend Display Graphical Data Interval In Sec 0 Power Source Battery Operated Automatic Switch From Mains To Battery In Case Of Power Failure Na Rs 232C Interface For Data Communication And Transfer Na Should Have Provisions For Wireless And Blue Tooth Connectivity Na Patient Extension Cable Not Provided Power Consumption In Watts 0 Operating Temperature Ambient Temperature Of 0 To 40 Deg C And Relative Humidity Of 15 To 90% Weight Of The Machine In Kg 10 Protective Splash Proof Case For Clean And Strogage And Safe Transport Provided No Length Of Power Cable Na Noise Level In Db 0 Display Must Allow Easy Viewing In All Ambient Light Levels Yes , Blood Pressure Machine Digital / Appratus Configuration Details Type Of Sphygmomanometers Or Blood Pressure Recording Unit: Digital Conformity To Indian Standrad For Sphygmomanometers Na For Digital Measuring Device Automated Type Portable Isi Marked Na For Digital Cm/L No And Validity Date Bp-(235)01 26/07/17 Measurement Method Oscillometric Display For Digital Bp Instrument: Lcd(Liquid Crystal Digital) Display Range: Pressure Measurement (Mmhg) 0 To 300 Range:Pulse Measurement For Digital With Accuracy &Plusmn; 5%. (Per Minute) 40 To 200 Accuracy:Pressure Measurement (Mmhg) +/- 3 Pressure Detection Capacitive Pressure Sensor Inflation Automatic Pressure Application By Pump Deflation And Rapid Air Release Automatic Pressure Release Valve Cuff Range Medium (22-32)Cm Dimensions Of The Equipment (Mmxmm) 400 X 80 X 90 Dimensions Of The Display Screen (Mmxmm) 59 X 43 Operating Temperature Range 0 To 55 Degree Celsius Stroage Temperature Range (-10) To 55 Degree Celsius Automatic Power Off If System Is Idle For 3 Minutes. Yes Weight (In Gram) 250 Power Power Source: Aa Size Chargeable Battery Set Type Of Aa Size Chargeable Battery (Aa Size) Lithium , Automatic Online Water Chiller 2 Ton Capacity Item Item Industrial Chiller Design No Of Door Single Position Of Door Top Opening Door Type Hinged Air Tight Door Yes No Of Shelves 0 Wheels No Visibility Of Item Stored No Type Of Insulation Poly Urethane Foam Method Of Defrosting Manually Deforested Type Of Cooling Direct Lock Yes Material Material Of Chamber Interior Abs Material Of Chamber Exterior Prepainted Sheet Door Material Polycarbonate Door Polycarbonate Window Door Cooling Coil Material Copper Instrument Temprature Controler Yes On/Off Switch Yes Storage Chamber Temprature Display Yes Audio Alarm Visual Alarm Digital Display No Visual Alarm Yes Digital Display Yes Capacity And Dimension Storage Volume(Net Capacity)(Liters) 1000 Over All Length(Mm) 1500 Over All Width(Mm) 1000 Over All Height(Mm) 1000 Insulation Thickness(In Mm) 60 Holdover Time(Minute) 60 Performance Eco-Friendly Refrigurator Yes Compressor Ac Reciprocating Compressor Set Temperature Range(Delta) 5 Minimum Achievable Temperature At 32 Degree Centigrade 8°C Green Refrigerants Yes Type Of Refrigerants R134a Voltage 220-240, Single Phase , 50 Hz Power Consumption(Kw/Day) 10 , Sink Hand Wash Station Item Stainless Steel Sink Built In Counter Uses Mess/School/Office And Other For Protection Against Covid-19 And Other Viruses Type Of Sink Built In Counter Stainless Steel Single Bowls Single Drain Board Sink Units Design Shape Of Sink Built In Counter Rectangle No Of Tap Holes 2 Design Feature In Stainless Steel Sink Built In Counter Tap Holes,Over Flow Holes,,Under Self Provided,Drainage Pipe Provided,Waste Jali Provided,Stiffener Provided Between Legs,Kitchen Unit Design Should Be Robust,Back Panel Above Table Provided,Three Side Panel Above Table Provided,Left Hand Side Drainage Provided,Right Hand Side Drainage Provided,Heavy Duty Rubber Shoe Dimension Length Of Counter(In Mm) 1200±10 Width Of Counter(In Mm) 700±10 Height Of Counter(In Mm) 900±10 Length Of Sink Bowl(In Mm) 450±10 Width Of Sink Bowl(In Mm) 500±10 Depth Of Sink Bowl(In Mm) 450±10 Length Of Additional Sink Bowl(In Mm) Na Width Of Additional Sink Bowl(In Mm) Na Depth Of Additional Sink Bowl(In Mm) ,Na Height Of Panel Above Counter 300±10 Height Of Panel Below Counter Na Thickness Of Stainless Steel Sheet(In Mm) 1.2 Thickness Of Sink Bowl(In Mm) 1.0 No Of Leg In Sink Built In Counter 6 Stainless Steel Structure Pipe Size 20 Dia Thickness Of Stainless Steel Structure Pipe 1.5 , Leg Operated Sanitizer Dispenser Or Foot Operated Sanitizer Dispenser Item Item Touchless Sanitizer Dispenser Type Of Dispensing Drop Mounting Type Wall Mounted Design Features Available In Touchless Sanitizer Dispenser Replaceable Liquid Bottle Sensing Range 0 - 4 Inch Rated Voltage 230V-50 Hz Material Body Material Of Touchless Sanitizer Dispenser Stainless Steel 304 Dimension Sanitizer Container Capacity (In Ml) 100-150 Dispensing Sanitizer Volume In One Use(In Ml) 10 , Sofa Set With Cushion 10Ft Material Frame Structure Material And Size (±1 Mm) Any Other Wood Of Minimum 25 Mm Thickness Seat Cusion Material Foam Density Of Cushion Of Seat Material ±3 (Kg/Cubic M) 40 Type Of Spring In The Base / Seating No Spring In The Base Generic Total Number Of Seats In The Sofa Set (Nos) 3 Type Of Sofa And Backrest Seat And Backrest Are Permanently Fixed With The Frame Structure Number Of Single Seater Units (Nos) No Single Seater Unit Number Of Two Seater Units (Nos) No Two Seater Unit Number Of Three Seater Units (Nos) 1 Number Of Four Seater Units (Nos) No Four Seater Units Frame Covering Fully Upholstered Sofa Set Is Foldable To Use As Bed No Backrest Cushion Material Foam Density Of Cushion Of Backrest Material (Kg/Cubic M) 40 Covering Material For Seat And Backrest Fabric Dimension Length Of Single Seater Units In Mm (±5 Mm) 750 Length Of Three Seater Units In Mm (±10 Mm) 3000 Depth Of Sofa Units In Mm (±10 Mm) 800 Sofa Height (Without Back Cushion) ±5 (Mm) 450 Millimeter Sofa Height (With Back Cushion) ±5 Mm 800 Millimeter Arm Width ±5 (Mm) 120 Millimeter Arm Height ±5 (Mm) 600 Millimeter Seat Height (With Seat Cushion) ±5 (Mm) 450 Millimeter Sofa Leg Height ±2(Mm) 75 Millimeter Sofa Leg Width / Diameter ±2 (Mm) 100 Millimeter Seat Cushion Length ±5 (Mm) 710 Seat Cushion Width ±5 (Mm) 510 Seat Cusion Thickness ±5 (Mm) 100 Backrest Cushion Length ±5 (Mm) 710 Backrest Cushion Width ±5 (Mm) 508 Backrest Cushion Thickness ±3 (Mm) 100 Thickness Of Foam In Arms ±2 (Mm) 50 Thickness Of Foam In Back ±2 (Mm) 76 Millimeter Thickness Of Foam In Front ±2 (Mm) 76 Millimeter Thickness Of Foam In Sides ±2 (Mm) 76 Millimeter , Wall Lamination, Decoration, Ply Running And Installation Per Feet Mdf, Paper Phenolic, Particleboard, Plywood, Baltic Russian Birch, Acrylic, Glass, Metal, Resin Panels:Thermally Fused Laminate (Tfl), Thermally Fused Melamine (Tfm), High Pressure Laminate (Hpl), Three Dimensional Laminate (3Dl), Wood Veneer, Translucent, Printed Graphic, Whiteboard, Chalkboard, Magnetic, Tackable With Installation And Its Regarding Feeting Materials Enter Rate In Running Sq Feet With Installation Feeting Chargesand Other Regarding Material , Wall Lamination, Decoration, Ply Running And Installation Per Feet Mdf, Paper Phenolic, Particleboard, Plywood, Baltic Russian Birch, Acrylic, Glass, Metal, Resin Panels:Thermally Fused Laminate (Tfl), Thermally Fused Melamine (Tfm), High Pressure Laminate (Hpl), Three Dimensional Laminate (3Dl), Wood Veneer, Translucent, Printed Graphic, Whiteboard, Chalkboard, Magnetic, Tackable With Installation And Its Regarding Feeting Materials Enter Rate In Running Sq Feet , Touchless Sanitizer Dispenser/Automatic Dispenser Item Touchless Sanitizer Dispenser Type Of Dispensing Spray Mounting Type Wall Mounted Design Features Available In Touchless Sanitizer Dispenser Built-In Sensor For Detection Of Hand,Waterproof,Battery Operated,Battery Cum Electric Operated,Anti-Interference,On/Off Button,Indicator Lamp,Speed Dispensing Of Liquid,Electric Adapter,With Battery,Liquid Filling Arrangement,Replaceable Liquid Bottle,Adjustable Dispensing Volume Sensing Range 0 - 4 Inch Rated Voltage Dc 6V,Dc 12V,230V-50 Hz Material Body Material Of Touchless Sanitizer Dispenser Abs Plastic Dimension Sanitizer Container Capacity (In Ml) 1001-1500 Dispensing Sanitizer Volume In One Use(In Ml) 5 , Flash Card 9.5 Cmx 1375 Cm (Alphabet/Fruit/Animal/Vegitable/Other) Set Of 5 Pcs , Small Board Book Set Of 5 - English - 2 To 5 Year (Domestic Aqua Animal/Birds/Wild Animals/Fruit/Vegitable/Abcd ) Any Set Of Five As Per Requirement , Abcd Chart Set Of 5 Pcs 65X55 Cm Aprrox Size (Abcd/Animal/Body Parts/Vegitable/Frouit/Animal Other) As Per Requirement , Basket Ball For Kids Type - Basket Ball Set Age - 3 To 8 Years Package Dimension - 33 X 25 X 13 Cm Ring Diameter - 14 Cm Ball Circumference - 38.5 Cm Weight - 174 Gm , Digital Infrared Thermometer Gun(High-Precision Infrared Sensor - Stable & Reliable Performance - Wide Temperature Ambience Adaptab) , Finger Tip Puls Oximeter ( Oxygen Level, Pulse Rate And Perfusion Index. It Has A Four-Colour Led Display With Adjustable Brightness And Comes With Signal Strength Display Feature.) , Fully Automatic Digital Blood Pressure Monitor( Fully Automatic Blood Pressure Monitor Operating On The Oscillometric Principle For Precise Measurements And Accurate Results. It Measures Your Blood Pressure And Pulse Rate With Easy One Touch Operation Cuff Size - Fits Arm Circumference (22-32Cm) The Device Uses Its Advanced Intellisense Technology For Comfortable Controlled Inflation Without The Need Of Pressure Pre-Setting Or Re-Inflation Even A Slight Pressure Change Can Be Detected Resulting Most Accurate Measurementalong With Blood Pressure Monitoring This Product Detects Irregular Heartbeat. It Is Loaded With Body Movement Indicator And Blinks If Your Systolic Or Diastolic Pressure Is Outside The Standard Range (Above 135 Systolic/85 Diastolic Mmhg)) , All In One Steam Vaporizer Machine For Cold And Cough With Nozzle Inhaler, Facial Sauna And Facial Steamer Machine For Adults And Kids , Hemoglobin Digital Monitor Accurately Detects Both Hb And Hct Levels Quick Hb And Hct Results Within 15 Seconds Simply Insert Strips, Apply Blood Specimen And Read Results Auto Calibration For Added Convenience No Specimen Preparation Required Low Maintenance And Quick Clean Up Urate Precise Result Equivalent To Automatic Hematology Analyser Only A Single Drop Of Fingertip Blood 10 Ul Sample Volume Required Wide Hb Measurement Range Of 5-25.6 G/Dl With Hct Range Of 15-75% Storage Maximum Test Results Portable Operated By Battery Or, Optional Ac Adapter Small And Handled For Immediate Diagnosis Ready To Use In Any Point Of Care Setting Dry Strips Hence Easy To Carry Anywhere , 3 Ply Face Mask Non Woven Disposable Face Mask Made Of Soft Non-Wove. Adjustable, Good Toughness, Good Nose Shaping, No Leakage. High-Quality Elastic Ear Loop, Stretching 19Cm, Suitable For Various Types. , 6-Inch Pre-Powdered Sterile Surgical Gloves-Box Of 50 Pairs Function:Anti-Smash, Anti-Heat, Anti-Cut, Arthritis Therapy, Anti-Static, Touch Screen, Anti-Vibration Material:Latex Aql 1.5 Colour:Blue, Violet, Black, White, Cobolt Blue Type:Powdered Or Powder Free Size:22*11*6, Xs/S/M/L/Xl Weight Of 9 Size:2.5Gsm-8Grms , Compressor Nebulizer Has An Attractive Wall-Mounting Design. The Body Is Made With Abs Plastic For Better Shock Absorption. Provides Anti-Vibration Feet. Doesnt Cause Much Noise. Comes With A Long Shelf-Life Compressor. Has An Attached Handle For Convenient Operation. , Blood Glucose Monitor With 10 Test Strips 1. Measurement Range: 1-33. 3Mmol/L 2. Blood Sample: Fresh Capillary Whole Blood 3. Blood Valume: 0. 5?L Small Blood Sample 4. Test Time: 5 Seconds 5. Operating Temperatuure: 10? To 35? 6. Automatic Alarm Clock Reminder 7. Date Management: 7, 14, 28, 60, 90 Days Averaging , Electrical Needle Syringe Destroyer/Needle Destroyer For Hospital And Laboratory Needle-Destroyers Minimize The Occurrence Of Accidental Needle-Sticks Because They Allow Immediate Removal And Containment Of The Needles, Especially If The Device Is Near The Area Of Use Provision Of On/Off Switch With Pilot Lamp Shock Proof-Main Circuit Breaker Is Provided. Portable, Compact, Handy , Pendent Lam Holder Usage/Application Laboratory Material Pvc Capacity 10L Packaging Type Box Weight Light Weight. Size 385*160*295 Mm Diameter 160 Mm , Pendent Lam Holder Material Plastic Style Classic Switch Installation Type Ceiling Colour White Brand Confident Shade Material Wood, Polycarbonate , Basics Storage Rack 7 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 7 Shelf Type Of Product : Storage Rack , Basics Storage Rack 6 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 6 Shelf Type Of Product : Storage Rack , Basics Storage Rack 5Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 5 Shelf Type Of Product : Storage Rack , Basics Storage Rack 4 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 4 Shelf Type Of Product : Storage Rack , Rechargeable Ultra Led Torch 0.5 Watt Type : Led Torch • Material : Plastic • Color : Assorted • Rechargeable : Yes • No.Of Lumens : 60Lm • Capacity : 0.5 Watts , Mrudung / Mridangam General Shell Material Jackfruit Wood Tuning Type Lace Tuned Color Brown , Product Dimensions ?50 X 30 X 30 Cm; 6 Kilograms Batteries Included ?No Batteries Required ?No Material ?Iron And Leather Item Weight ?6 Kg , Wooden Standard Harmonium Harmonium Material Specification Reed Material Copper Material Wooden Material Of Knobs Nickled Metal Material Of Frame On The Back Keys Glass Wood Type Kail Dimension Details Length 60 Centimeter Height 20 Centimeter Width 30 Centimeter Weight 6 Kilogram General Features Types Standard Harmonium Scale Changer No Coupler Type Na Reed Set Type Na Special Reeds No Extra Notes Na No. Of Drones Na Bellow Type Seven Fold Bellow Top Body Cover No Frequency (Hz) A440 Portable Yes Keyboard With Lock No Special Keys No Number Of Keys 33 Color Brown No Of Stop Knobs 7 , Handmade Jhanjh Percussion Indian Musical Instrument Cymbal Pair (Gold) 5D , Piano Portable Keyboard 61 Keys Product Dimensions ?93 X 25.6 X 7.3 Cm; 93 Grams Batteries ?6 Aa Batteries Required. , Type Of Product: Solar Combooperating Voltage: 12Vsolar Wattage: 50W Spvbattery Include: Artheon Batteryled: Dc Ledbattery: 40Ah , Type Of Solar Module Polycrystalline Module Efficiency =15% Module Product Warranty 1 Year Charger Technology Mppt Warranty Of Pcu 12Month Output Phase Single Rated Power (Kva) 1.5 Efficiency At Stp For Linear Loading =90% Input Phase Single Nominal Battery Dc System Voltage 48 Volt Capacity Of Power Plant (Kva) 1 Battery Warranty 1 Year No Of Battery 1 Battery Capacity (Ah) 150 , Laptop Office Bag Multicolour Leather P.U. Office Bag No. Of Compartments:5 Product Dimension (Lxwxh) Cm:40X20x30 , Mobile 4 G Supported : 48Mp (F2.0) Quad Rear Camera + 8Mp (F2.2) Ultra Wide Camera + 5Mp (F2.4) Depth Camera +5Mp (F2.4) Macro Camera | 20Mp Front Camera 16.21 Centimeters (6.4-Inch) Super Amoled - Infinity U Cut Display, Fhd+ Multi-Touch Capacitive Touchscreen With 1080 X 2400 Ixels Hd+ Resolution, 412 Ppi | 16M Color Support Memory, Storage & Sim: 6Gb Ram | 128Gb Internal Memory Expandable Up To 512Gb | Dual Sim (Nano+Nano) Dual-Standby (4G+4G) Android V10.0 Operating System With 2Ghz+1.7Ghz Mediatek | Mt6768 Octa Core Processor 5000Mah Lithium-Ion Battery 1 Year Manufacturer Warranty For Device And 6 Months Manufacturer Warranty For In-Box Accessories Including Batteries From The Date Of Purchase Box Also Includes: Travel Adapter, Usb Cable And User Manual , Steel Folding Cot Steel/Iron Frame Width Of Frame +/- 5(Mm) 762 Mm Length Of Frame +/- 5(Mm) 1980 Mm Size Of Mdf Board 2100X900x17 Mm Size Of Plywood 2100X900x19 Mm , All In One Printer (Inkjet Technology Monochrome) With Adf , Stapler Big Size Half Strip All Metal Construction With Plastic Cover Quick Loading Machanism Rotating Anvil And Reload Indicator. Ideal For Frequant Stapling , Stapler Pin Big Heavy Duty Staple Pin Size 24/6 Big Staple Pin And Big Stapler Pin Use For School, Offices , Stapler Medium Size Half Strip All Metal Loading Capacity: 50/100 Pins Model: 999 Staple Used: No 10 Stapling Capacity: 20 Pages All Metal Half Strip Stapler Quality Steel Component Quick Loading , Paper Punching Machine Punching Capacity: 11 Sheets Punching Dia: 5.50 Mm Punching Distance: 80 Mm , Paper Punching Machine Medium Size Punching Capacity: 22 Sheets Punching Diameter - 5.5 Millimeters, Punching Distance - 80 Millimeters Medium Size Punch Silky Touch , Hole Diameter 5.5Mm Hole Distance 80Mm Material Metal No. Of Holes 2 Punching Capacity 36 Pages , Ice Pick(Tocha) Handle Wooden / Fibre /Plastic/Steel/ Iron Handle Size Size 4.5 , Tent House Jumbo Big Sizeextremely Light Weight Water Proof Kids Play House Tent For 10 Year Old Girls And Boys Product Dimensions Product Width 73 Cm Product Height 108 Cm Product Weight 0.4 Kg , Product Width 73 Cm Product Height 108 Cm Product Weight 0.4 Kg , Doll House Playhouse Playset Age - 3 Years+ Material - Plastic Dimensions - L 16 X B 8 X H 31 Cm , Thermos Stoneware Tea Kettle Set 1000 Ml Material Material Of Kettle Stoneware Grade Of Glass Embossed Material Of Infuser Stainless Steel Food Grade Infuser With Material Of Handle Stoneware Design Type Of Handle Fixed Artistic Design, Pattern And Logo Over Kettle Yes Artistic Design,Dimension Of Kettle Capacity Of Kettle (Mm) 1000 Wall Thckness Of Kettle (Mm) 2 Additional Items Cup And Saucer Set With Details Of Cup And Saucers Set No Of Cups And Saucers In Each Set (Nos) 2 Capacity Of Cup (Ml) 70 Wall Thickness Of Saucer 3 Overall Diameter Of Saucer (Mm) 60 Colour Of Cup And Saucer Set Na Wall Thickness Of Cup (Mm) 4 Wall Thickness Of Saucer (Mm) 60 Performance Of Kettle Suitable For Heating On Direct Flame Yes Suitable For Heating On Induction Heater Yes Suitable For Heating On Hot Plate Yes Recommended Max. Temperature For Safe Use (Degree C) 90-120 , Stainless Steel Serving Tray (Large Size) For Serving Water And Dishes Product Dimensions ? : ? 43 X 30 X 3 Cm; 330 Grams , Serving Tray Set Of 3 For Coffee/Tea/Breakfast(Printed Design) Product Dimensions ? : ? 43 X 30 X 3 Cm; 330 Grams , Tea Set Items Cup ,Soucer ,Tea Set Number Of Cup In One Tea Set 6 Pcs Number Of Soucer In One Tea Set 6 Pcs Number Of Tea Pot In One Tea Set Na Number Of Milk Pot In One Tea Set Na Number Of Sugar Pot In One Tea Set Na Material Of Tea Set Ceramic/Glass/And Other Nominal Capacity Of Tea Pot ( In Litre ) Na Nominal Capacity Of Milk Pot ( In Litre ) Na Nominal Capacity Of Sugar Pot ( In Gram ) Na Nominal Capacity Of Cup ( In Ml ) 150 Diameter Of Soucer ( In Mm ) 100 Diameter Of Cup Rim ( In Mm ) 50 Height Of Cup ( In Mm ) 50 Required Overall Length Of Tray ( In Mm ) Na Required Overall Width Of Tray ( In Mm ) Na Required Overall Diameter Of Tray ( In Mm ) Na Coller Hole Of Tray Na , Table Topglass Water Glass Lass Tableware Items Water Glass Conformity To Specification Is 1961 Product Is Bis Marked Yes Design On Glass Tableware Na Nominal Capacity Of Glass Tableware For Liquid (Ml) 300 Nominal Capacity Of Glass Tableware For Solid (Gm) Na Minimum Thickness At Any Point(Mm) 3.0 Top Diameter Of Glass Tableware(Mm) 90 Bottom Diameter Of Glass Tableware(Mm) 90, Height Of Glass Tableware(Mm) 100 Length Of Butter Dishes(Mm) Na Width Of Butter Dishes(Mm) Na , Beverage Cup, Stackable Cups, Break-Resistant Commercial Polycarbonate Glasses Table Topglass Water Glass Lass Tableware Items Water Glass Conformity To Product Is Design On Glass Tableware Na Nominal Capacity Of Glass Tableware For Liquid (Ml) 300 Nominal Capacity Of Glass Tableware For Solid (Gm) Na Minimum Thickness At Any Point(Mm) Na Top Diameter Of Glass Tableware(Mm) Na Bottom Diameter Of Glass Tableware(Mm) Na, Height Of Glass Tableware(Mm) 100 Length Of Butter Dishes(Mm) Na Width Of Butter Dishes(Mm) Na , Frame Type Free Standing Understructure Of Table Gable End And Modesty Panel Storage Provided Both Side Keyboard Tray Provided Foot Rest Not Provided Material Table Top Material Three Layer Prelaminated Particle Board(Wood Product) Of Grade Ii Type Ii Of Is 12823/Latest Gable End And Modesty Panel Material Three Layer Prelaminated Particles Board(Wood Product) Of Grade Ii Type Iii Of Is 12823/Latest Leg Material No Legs Misc Table Top Long Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Table Top Plain Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Gable End And Modesty Panel Plain Side Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Number Of Buffers Provided N.A Dimension Thickness Of Table Top ±2 Mm 38 Millimeter Thickness Of Gable End And Modesty Panel ±2Mm 38 Millimeter Length Of Table Top ±10 Mm 1500 Millimeter Depth Of Table ±10 Mm 850 Millimeter Height Of Table ±10 Mm 750 Millimeter Dimension Of Leg(Mmxmm) ±5Mm No Legs Storage Unit Number Of Storage Unit Provided Double Storage Width Of Storage Unit ±10Mm 400Mm Depth Of Storage Unit In Mm (±10Mm) 600 Height Of Smallest Storage Unit ±5Mm 50Mm Height Of Medium Storage Unit ±5Mm 175Mm Height Of Largest Storage Unit ±5Mm 280Mm Keyboard Tray Type Of Keyboard Tray N.A Material Of Keyboard Tray And Right Angle L-Type Supporting Bracket N.A Keyboard Adjustablity N.A Fixing Of Supporting Bracket N.A Length Of Telescopic Channe±L0mm N.A Average Weight Of Telescopic Channel ±50Gms N.A Keyboard Front Width±10Mm N.A Keyboard Depth±10Mm N.A Keyboard Height±10Mm N.A Finish Of Exposed Edges Of Keyboard Tray N.A Material Thickness Of Keyboard Tray ±1Mm N.A Footrest Material Of Footrest N.A Length Of Footrest ±10Mm N.A Depth Of Footrest ±10Mm N.A Height Of Footrest ±10Mm N.A Finish Of Exposed Edges N.A Material Thickness Of Footrest ±2Mm N.A , Table Top Glass Thickness 12Mm Type Of Glass Toughened, Heavey, Break Resistance, Smooth, , Diesel Mechanical Hopper Tipper With Three Wheeler Diesel Mechanical Hopper Tipper With Three Wheeler Generic Parametersdrawing Of The Complete Vehicle Indicating Overall Length, Width, Track And Height Will Be Provided On Demand Of Buyer Yes Vehicle Kerb Weight With Fabrication 704 Kilogram Gross Vehicle Weight 975 Kilogram Pay Load Capacity (Gvw-Vkw With Fabrication) 271 Kilogram Gradebility (Degree) 22 Maximum Speed Of Vehicle (Kmph) 60 Max Engine Bhp 9.4 Rated Rpm At Max Engine Hp 3600 Max Torque (N-M) 23.5 Rated Rpm At Max Torque 2200 Vehicle Emission Compliance Bs-Vi Vehicle Mileage (Kmpl) 26 Type Of Fuel Diesel Fuel Tank Capacity (Ltrs) (Kg In Case Of Lpg/Cng) 10.5 Engine Aspiration Natural Cooling System Liquid Anti-Air Pollution Measures Adopted Yes Electronic Control Unit (Ecu) Yes Battery Volt 12 Volt Type Of Exhaust Gas Re-Circulating System Other If Other, Mention The Type Na Lambda Sensor No Type Of Transmission Mechanical Type Of Clutch Multi Disc Wet Type Gearbox Manual No Of Forward/Speed Gears 5 Gear Ratio 26 Type Of Suspension System Hydraulic Telescopic Speedometer Yes Designation Of Front Wheel 4.5-10, 8 Periodical Renewal Designation Of Rear Wheels 4.5-10, 8 Periodical Renewal Type Of Wheel Rims Sheet Metal Type Of Steering Control Handle Bar Location Of Steering Centre Type Of Front Brakes Drum Type Of Rear Brakes Drum Head Lamp High Beam Yes Head Lamp Dipped Beam Yes Front Position Light Yes Tail / Stop Light Yes Number Plate Illumination Light Yes Direction Indicator Lights, Front And Rear Yes Parking Lights Yes Reversing Light(S) Yes Reflex Reflector Rear Yes Reflex Reflector Side(If Provided) Yes Hazard Warning Lamp (Wherever Applicable) Yes Rear-View Mirrors Yes Constructional Parameters Length Of Chassis 3145 Millimeterwidth Of Chassis 1490 Millimeter Wheelbase 2100 Millimeter Rear Overhang 1130 Millimeter Capacity Of Carrier (Cu-M) 1.25 To 2.5 Mention Capacity Of Carrier (Cu-M) 2 Tipping Facility Available Yes Tipping Angle 45 Degree Tipping Operation Hydraulic Lifting Pump , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Type Of E Cart Fully Electric, Battery Operated Motor Driven For Carrying Bins Model Number Of E- Cart Maxi E Cart Colour Of E Cart Green And Blue The E Cart Must Fabricated From Good Quality Steel Properly Painted To Avoid Rusting For More Than 5 Years, Yes Name And Grade Of Steel From Which E Cart Body Framed Ms And Alloy Steel Kerb Weight Of E- Cart (Kg) 247 Kilogram Garbage Carrying Capacity (Kg) 310 Kilogram Run Distance (For A Full Charge Of Battery , To Be Tested With Full Load At Maximum Ais-040 )) (Km) 95 Number Of Bins 2 Capacity Of Individual Bins In Litres (Ltrs) 155 Liter Type Of Chassis For E Cart Tubular Ground Clearance As Per Is : 9435 (Mm) 180 Wheel Base (Mm) 2090 Millimeter Turning Radius (Mm) 2200 Millimeter Power Transmission From Motor Shaft To Wheels Direct Mounting Please Specify The Mechanical Mechanism Otherwise Put Na Na Tipping Facility Yes Tipping Angle 75 Degree Method Of Tipping Hydraulic If Others, Mention The Method Of Tipping Hydraulic Type Of Battery As Per Ais-048 Lead Acid , Ev Grade , Tubular Deep Dischargecapacity Of The Battery Approved By Icat/Arai (Ah) 110 Battery Voltage ,Nominal (Volts) 48V Maximum Overall Dimensions Of The Battery ( L X Wx H ) (Mm3) 410 X 176 X 210 Nominal Filled Weight Of The Battery (Kg) 120 Kilogram Motor Controller ( Must Suitable For Starting, Accelerating, Decelerating, Driving , And Stopping Of E Cart Yes Battery Charger 220/230 V Nominal Input Voltage , High Efficiency Type Charging Current (A) 12 Type Of Motor Brushless Dc Motor Motor Output Power ,48V/60V At Full Load (Watt) 1200 Overall Efficiency Of The E Cart ( To Be Tested At Full Load With Maximum Speed As Per Concerned Ais Standards (%) 85 Gradeability Of E-Cart , ( To Be Tested At Full Procedure As Per Ais -003 Load (Degree) 15 Constructional Seating Facility For Driver Only Length Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 2.8 Width Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct, 2014 (Meters) 1 Height Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.8 Dimensions Of The Cabin Provided For Bins (Mm X Mm X Mm) (Mm3) 1500 X 900 X 1400 Size Of Front Tyre (Mm) 90 X 90 X 12 Size Of Rear Tyre 90 X 90 X 12 Brake Type (Front) Drum Brake Type ( Rear ) Drum Suspension System (Front) Shockers Suspension System ( Rear ) Leaf Spring Reverse Gear Facility Yes The Mounting Of Batteries Yes Vehicle Lighting System Filament Type Instrument Panel Containing Speedometer And Battery Charging Indicator Yes Glass Windshield With Wiper Motor As Approved By Icat/Arai Yes Battery Make As Per Ais :048:2009 Exide If Others Please Specify The Name Of Brand ,Otherwise Put Na (As Per Ais048 2009) Na Equipped With Start And Stop Button, Parking Lights , Back Lights With Reverse Gear Facility Yes Equipped With Fire Extinguisher Yes Equipped With First Aid Box Yes Yellow Color Reflective Tape On Front And Rear Side Of The E Cart Yes E Cart Integration , Yes Performance Parameters Speed Of The E- Rickshaw As Per Cmvr -2014 With Latest Amndmt (To Be Tested With Full Load ) (Kmph) 23 Battery Warranty 1 Year No. Of Free Service 1 Year Compliance Of Centre Of Gravity Of E Cart As A Compulsory Norms For Safety Yes Confirming To Applicable Environmental Test Yes Noise Level Must Be Low During Operation Yes , Diesel Bs-Vi Hopper Tipper Dumper With Capcity 2.5 Cubic Metres With Four Wheeler Generic Parameters Type Of Tipper Garbage Tipper Type Of Tipper If Other Tipper ,Please Declare Type Of Tipper, Garbage Tipper Make Of Chassis 4 Wheelr Chasis Type Of Chassis Frame Conventional Category Of Vehicle For Which Chassis To Be Used Light Capacity Commercial Vehicles Type Of Chasssis Chassis With Facecowl Type Of Fuel Diesel Vehicle Emission Complaince Bs-Vi Fuel Consumption ( Declared By Oem As Certified By Test Agency Under Rule 115Of Cmvr 1989) (Kmpl) 22Speed, Max (Km/Hr) 60Max Engine Power Bhp (Bhp@Rpm) 20Rated Rpm At Max Engine Power 3600 Max Engine Torque (N-M@Rpm) 45 Rated Rpm At Max Engine Torque 3600 Main Engine Aspiration Natural Aspiration No. Of Cylinder In Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Liter Gradeability Of Vehicle With Load( %) 13.2 Ground Clearance (Mm) 160 Millimeter Wheel Base (Mm) 2100 Millimeter Kerb Weight (Kg) 920 Kilogram Gross Vehicle Weight (Kg) 1675 Kilogram Type Of Bis Marked Vehicle Tyre Radial Chassis Transmission System Manual Number Of Speed/ Forward Gears 5 Type Of Steering Manual Turning Radius,Min (Mm) 4300 Millimeter Speed Governers/Ecu Yes Abs Fitted No Front Vehicle Brake Disc Brake Hydraulic Rear Vehicle Brake Drum Brake Hydraulic Type Of Clutch Single Plate Dry Tipping Angle (Degree) 48 Tipper Container Capacity/Volume(Cubic Metres) 2.5 Consructional Parameters Size Of Front Tyres (Mm) 145 R12 Size Of Rear Tyres (Mm) 145 R12 Size Of Wheel (Mm) 304.8 Millimeter Tipper Body Pivot Length (Mm) 1546 Millimeter Tipper Body Length (Mm) 2000 Millimeter Tipper Body Height (Mm) 670 Millimeter Overall Height Of Tipper From Ground (Mm) 1489 Millimeter Body Plate Thickness (Mm) 2 Main Frame Thickness (Mm) 3 Millimeter Hydraulic System Yes Tipping Hydraulic Cylinders(Make) Liftwell/Dantal/Eqv Hydraulic System Driven By Main Engine Tipper Container Material Mild Steel Thickness Of Sheet From Tipper Collector Container Made (Mm) 2 Millimeter Dumping Height (Mm) 550 Millimeter Engine Oil Pressure Level Indicator In Control Panel Yes Fuel Gauge Indicator In Control Panel Yes Engine Cooling Liquid Temperature Indicator In Control Panel Yes Operating Hour Meter No Locking/Unlocking Of Tipper Discharge Container Yes Lowering/Lifting Of Tipper Discharge Container Yes Counter Weight No If Yes Counter Weight (Kg) 0 Kilogram Paint Automotive Paint Performance Parameters Standard Sparewheel And Tool Kit Yes Warranty Time (Month) 12 Month No. Of Free Service (Nos) 3 Battery Warranty (Months) 12 Month Warranty Distance (Km)(Unlimited During Warranty Period) Yes , Vehicle Mountable Fogging Machine Operated Electrical Single Blor Type And Starting Of Machine Type Vehicle Mountable Starting Electrical Material Chemical Tank Material Stainless Steel Fuel Tank Material Crc Steel (Portable) Chemical Tank Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Fuel Tank (Material)/Thickness Crc Steel/1.0Mm Grade Cr4 Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 75/160 (Vehicle Mountable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) 75/160 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 75/20 Other Physical Characteristics Duration To Operate Without Refuel (Hrs) 1.5 Noise Level (Decibel) 109 Durability After 50 Hrs Auto Cut Off For Elimination Of Fire Accident, Non Pressurized Fuel Tank To Control Temperature Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Vehicle Mountable Fogging Machine Operated Electrical Single Blor Machine Type Vehicle Mountable Starting Electrical Material Chemical Tank Material Stainless Steel Fuel Tank Material Stainless Steel Chemical Tank (Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Fuel Tank (Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 37/75 (Vehicle Mountable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) 37/75 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 37/10 Other Physical Haracteristics Duration To Operate Without Refuel (Hrs) 2 Noise Level (Decibel) 102 Durability After 50 Hrs Auto Cut Off For Elimination Of Fire Accident, Non Pressurized Fuel Tank To Control Temperature Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working + 1 Standby) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Cycle Rickshaw Garbage Container Closed Type, Box Size 12 Cft Capacity. Heavy Duty 5 Bar Frame, And Chassis Of 35X35x3.5Mm. Angle Iron With Box Fitted, Box Made Of 1.25 Mm Sheet And Manual Tilting Arrangement, Complete Painted. , Frp Indoor Merry Go Round Dimensions 44 × 44 × 44 Cm , Outdoor Merry Go Round Dimension Product Area 1500 Mm Dia Safe Play Area 2500 Mm Dia , Slide Ladder (Preschool Kit) Virgin Polyethylene And Full Arch Shape Material Slide Ladder Made Up Of Virgin Grade Polyethylene Plastic Virgin Polyethylene Bolts Quality (To Provide Greater Stability To Slide) To Provide As Per Approved Advance Sample Dimension And Mass Overall Length Of The Product (When Assembled) 2415Mm Overall Width Of The Product (When Assembled) 965Mm (Stare Supporting Base) And 432 Mm (Sliding Part) Length Of Sliding Part 1829 Mm Length Of The Stair Panel 1270 Mm Step Rise Of Each Stair 445 Mm Long Minimum Overall Plastic Weight Of Product 16 Kg , Adjustable Basketball Kids Multicolor Assembly Required ?Yes Batteries Required ?No Batteries Included ?No Material Type(S) ?Plastic Remote Control Included? ?No Color ?Red; Blue Product Dimensions ?35 X 45 X 25 Cm; 7.87 Kilograms , Jeevan Drop 100 Ml Sodium Hypochlorite Solution , Tablet-Processor Qualcomm® Snapdragon™ 429 Processor (4 Cores, 4X A53 @2.0 Ghz) Operating System Android 9 Display Type 25.65Cms (10.1) Hd (1280X800) Ips 300Nits Memory 3 Gb Soldered Lpddr3 Hard Drive 32 Gb Emmc Warranty 1 Year On Tablet, 6 Months On Accessories (Carry-In) Ac Adapter 10W Voice Service Voicecall Graphics Integrated Qualcomm® Adreno 504 Graphics Battery Integrated 4850Mah Camera Front 2.0Mp + Rear 5.0Mp Wireless 4G Calling + Wifi Volte & Bluetooth® 4.2 , Ro 15 Ltr Performance Parameters Maximum Input Water Tds Allowed To The System 2000 Type Of Water Purification Technology Ro Aavailability Of Sediment And Activated Carbon Filter Yes Operation Fully Automatic With Auto Cut Off Conformity To Standard For Ultraviolet System Is 14724 (Latest) For Water Purification System Recovery At 27 Degree Centigrade 30-40 Output Water Forming Standard Is 10500 (Latest) Filtration Capacity In Liter/ Hour 15 Provision Of Arsenic Removal Yes Provision Of Floride Removal Yes Provision Of Chloride Removal Yes Alkaline Filter No Storage Tank Inbuilt Type Of Out Put Water Storage Tank Abs Food Grade Storage Tank Capacity (Storage Tank External For Higher Capacity If Required To Be Arranged By Buyer) 8Ltr Minimum Inlet Pressure 0.6 Kg/Cm2 Maximum Inlet Pressure 3.5 Kg/Cm2 Maximum Inlet Temperature 40 Degree Digital Display No Real Time Tds Display No Real Time Ph Display No High Pressure Pump Yes Raw Water/Chemical Raw Water/Chemical Cleaning Pump Yes Micron Filter Yes Total Dissolved Solids Removal Percentage From Ro Membrane 90% Particulate Filter Porosity 20 Micron Pressure Vessel Sand Filter No Pressure Vessel Carbon Filter Yes Pressure Vessel Dual Media Filter No Membrane Housing Yes Body Of Filter Abs Food Grade Auto Cut Yes Number Of Candles 5 Power Supply 230 Volt Single Phase Installation Type Wall Mounted , Mothe Patele 5 Kg Capacity , Mothe Patele Zakan , Sarata Motha , Chamcha Motha , Plate For Break Fast Ss Food Grade , Mothi Parat , Chhoti Parat , Glass , Water Jar , Handa 10 Ltr , Water Tank 50 Ltr Steel , Fruit Set For Kids , Vegitable Set For Kids , Office Table 4X2 , Office Fibre Chair , Abcd Chart Set Of 5 (Abcd, Number, Animal, Flower, Vehicle) , Hand Wash Station 3 Stand Material Ss Grade Ss304,Ss316,Etc. Length 4-5 Feet Width 2-3 Feet Ss Sink 3 Nos Foot Operated Number Of Tap 3 , Sanitary Pad General Napkin / Pad Consists Of Outer Covering With Sufficient Number Of Channels For Leak Protection Yes Type Of Napkin Large With Tab Napkin / Pad Shall Have A Non-Absorbent Barrier On One Side Which Shall Have An Identifying Thread Or Marking Indicating Clearly The Side Of The Barrier Yes Adhesive Back Strip Yes Color Of Pad White Soft,Comfortable,Breathable,Odorless , Anti-Bacterial , Non-Allergic And Bio-Compatible,Bio-Degradable Yes Ph Of The Absorbent Material Of The Napkin As Per Is : 1390-1961 Yes Absorbency With Prescribed Fluid @50 Ml/Min Instead Of 30 Ml Of Cl 5 (1) Of Is : 5405/1980 (First Revision) Reaffirmed 2012, With Amendment 1, Without Leakage On Bottom And Sides Yes Disposability - Disposable Napkin /Pad With Covering Removed Shall Dis Integrate In The Water In Not More Than 5 Minutes When Immersed In 15 Litres Of Water And Stirred Yes Instructions Indicating Removal Of Non-Absorbent Barrier Before Flushing Of Napkin Yes Standard Conformity To Indian Standard Is: 5405-1980(Latest) Except For Absorbency And Size Yes Product Is Bis Marked No Cm/L No(If Product Is Isi Marked) 0 Dimensions Size Of Napkin (Length X Width X Thickness) (In Mm) (240+-10)X (75+-5) X (10 +-1.5) Weight Of Single Pad (In Grams) 10+-1 The Thickness Of The Pad Shall Be Average Of The Height Measured By Stacking 10 Complete Pads Yes Napkin / Pad Should Have Uniform Thickness Throughout Without Any Wrinkle Or Distortion Yes Material Material Of Outer Cover/Layer Rayon Absorbent Filler Material Cellulose Pulp Absorbent Filler Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material Yes The Covering Of The Absorbent Filler Shall Be Of A Good Quality Poly-Perforated Film Sleeve, Gauze Or Non-Woven Fabric With Sufficient Porosity To Permit The Assembled Pad To Meet The Bsorbency Requirement Yes If Cotton Gauze Is Used For Covering Of The Absorbent Filler, It Shall Conform To Is 758-1975 Na , Automatic Sanitiser Dispenser Machine With Battry Branded 5 Ltr (Blue Mount/Dolphy/Euronics) , Alcohol Based Hand Sanitizer/Hand Cleanser 5 Ltr Can Hand Rub Contains Glycerol-1.45%,Hydrogen Peroxide I.P.- 0.125% V/V,Ethanol 60-95% W/W Conformity To Standard Ip , Composition Ethanol Form Of Supply Liquid Shelf Life (In Months) From The Date Of Manufacturing 36 Efficacy Of Killing ~ 100% Germs After Contact Yes Hand Rub Shall Be Clear And Colorless Yes Hand Rub Shall Not Have Any Unpleasant Odour Or Smell Yesspecial Precaution For Storage Room Temperature Special Warnings And Precautions For Use Stay Away From Eyes , Sodium Hypochlorite 50 Kg Can Sodium Hypochlorite Solution (Grade 1) Conforming To Indian Standard Is 11673(Latest) Yes Whether Isi Marked No Cm/L Number(Must Declare,If Isi Marked) Na Food And Drug License Available No Test Report Details Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification Yes Test Report To Be Submitted To The Buyer On Demand Yes Food And Drug License Number(Write Na ,If Not Available) Ad/006 Physical Characteristics Form Liquid Colour Pale Yellowish Green Requirements For Sodium Hypochlorite Solution Relative Density(At 25?/25?C) 1.18 Available Chlorine Percent By Mass By Volume 10 Total Chlorine Percent By Volume(As Cl) 10 Free Alkali (As Naoh) (Min)G/L 1 Free Sodium Arbonatena2co3 (Max)G/L 0.5 Iron(As Fe)(Max) Ppm 0.4 Sodium Chlorate 0.05 , Shoes Stand , Dustbeen 10 Ltr , Rocker For Kids - Multi-Color Plastic Horse Ride-On Toy For Kids 0 To 5 Year Material:- This Rocker For Kids Is Made Up Of Non-Toxic Harmless Plastic. , Longevity: These Playgro Rockers For Kids Are A Standout Toy For Both Its Quality And Its Longevity And Is 100% Manufactured In India. High Precision: The Parts Of This Kids Rocker And Ride Are Made Using High Precision Machines. , Kids Toy Tricycle With Heavy Iron Pipe & Plastic Product Type Tricycles For Kids Age 6-12 Months;12-24 Months;2-4 Years Ideal For Infants Color N/A Material Plastic;Iron Power Required Yes Product Dimension 55 Cm X 38 Cm X 59 Cm , Tower Block Game Set For Children To Learn Shapes, Colours And Sizes Keeps Kids Engaged By Building Various Structures Safe For Toddlers To Use; Tested In An Nabl Accredited Lab Against 72 Different Safety And Performance Parameters Is9873 Certified Product Meets Quality And Safety Standards Ideal For Homeschooling, Playgroups And Kindergarten Made In India , Shoes Stand Plastic Made , Play Ball (Set Of 10 Ball ) With Different Colours Suitable For Kids Age 0 To 6 Years , Diesel Mechanical Hopper Tipper With Three Wheeler Certification Arai/Vrde/Icat Chassis Certification Arai/Vrde/Icat No Aaon 0406 F01 Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per Cmvr Rules Yes Registration To Local Rto (Regional Transport Office)/Rta(Regional Transport Authority) By Seller Yes Generic Parameters Drawing Of The Complete Vehicle Indicating Overall Length, Width, Track And Height Will Be Provided On Demand Of Buyer Yes Vehicle Kerb Weight With Fabrication 700 Kilogram Gross Vehicle Weight 974 Kilogram Pay Load Capacity (Gvw-Vkw With Fabrication) 496 Kilogram Gradebility (Degree) 23.8 Maximum Speed Of Vehicle (Kmph) 60 Max Engine Bhp 9.4 Rated Rpm At Max Engine Hp 3600 Max Torque (N-M) 23.5 Rated Rpm At Max Torque 2200 Vehicle Emission Compliance Bs-Vi Vehicle Mileage (Kmpl) 30 Type Of Fuel Diesel Fuel Tank Capacity (Ltrs) (Kg In Case Of Lpg/Cng) 10.5 Engine Aspiration Natural Cooling System Liquid Anti-Air Pollution Measures Adopted Yes Electronic Control Unit (Ecu) Yes Battery Volt 12 Volt Type Of Exhaust Gas Re-Circulating System Cooled If Other, Mention The Type Na Lambda Sensor Yes Type Of Transmission Mechanical Type Of Clutch Multi Disc Wet Type Gearbox Manual No Of Forward/Speed Gears 5 Gear Ratio 26 Type Of Suspension System Spring With Damper Speedometer Yes Designation Of Front Wheel 4.50-10.8Pr Designation Of Rear Wheels 4.50-10.8Pr Type Of Wheel Rims Sheet Metal Type Of Steering Control Handle Bar Location Of Steering Centre Type Of Front Brakes Drum Type Of Rear Brakes Drum Head Lamp High Beam Yes Head Lamp Dipped Beam Yes Front Position Light Yes Tail / Stop Light Yes Number Plate Illumination Light Yes Direction Indicator Lights, Front And Rear Yes Parking Lights Yes Reversing Light(S) Yes Reflex Reflector Rear Yes Reflex Reflector Side(If Provided) Yes Hazard Warning Lamp (Wherever Applicable) Yes Rear-View Mirrors Yes Constructional Parameters Length Of Chassis 3145 Millimeter Width Of Chassis 1490 Millimeter Wheelbase 2100 Millimeter Rear Overhang 735 Millimeter Capacity Of Carrier (Cu-M) 1.25 To 2.5 Mention Capacity Of Carrier (Cu-M) 2 Tipping Facility Available Yes Tipping Angle 45 Degree Tipping Operation Hydraulic Lifting Pump , Fogging Machine Single Blor Type And Starting Of Machine Type Portable Pulse Jet Type Starting Manual Material Chemical Tank Material Hdpe Fuel Tank Material Hdpe (Portable) Chemical Tank (Material)/Thickness Hdpe Density:0.935G/Cc,Polymer Content 99.45% Fuel Tank (Material)/Thickness Hdpe Density:0.935G/Cc,Polymer Content 99.45% Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 10/20 (Portable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) (10/17.5)/5 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 10/1.2 Other Physical Characteristics Duration To Operate Without Refuel (Hrs) 1 Noise Level (Decibel) 102 Durability After 50 Hrs 50 Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Sanitary Pad Vending Machine General Type Of Machine Automatic Type Of Fitting Wall Mountable Color Others Napkin Size For Loading Extra-Large Napkin Fold Trifold Operating Features Coin Operated Multiple Coins Accepted Yes Number Of Napkins/Pads Provided/Loaded With The Vending Machine 35 Multiselection Of Napkin Type Yes Number Of Selection Options 1 Vending Option Vertical Accessibility For Free Vending Utility Service Token Type Of Loading Spiral Vending Napkin Individually Packed Yes Led Illumination Provided For Visibility Of Napkins In The Machine No Visibility Window Yes Pre-Programmable Facility Available Yes Maximum Storage Capacity (Nos)(Nos) 25-50 Digital Counter For Accounting Yes No Stock Message Display Available Yes Built-In Program For Automatic Coin Return/Reject System When There Is No Stock Or No Power No Built-In Program For Automatic Currency Block/Reject System When There Is No Stock Or No Power No Built-In Price Programming Software For Changing The Price Yes Sales Data Retrieval Yes Any Additional Built-In Features Available Easy Access To Use Functional Features Material Of The Outer Body Mild Steel(Ms) Type Of Battery Na Built-In Charger No All Ms Parts Are Duly Painted By Powder Coating Mode Of Function Stand Alone Operating Power Source Electronic Input Power Supply 220V +/- 10%, 50Hz, Single Phase Ac Battery Backup Available No Battery Backup Time (Hrs) Na Power Consumption(Watt) Na Dimensions Width (Mm) 100-200 Depth (Mm) 200-400 Height (Mm) 800-1000 Weight (Kg) 10-20 Thickness Of Ss/Ms Sheet (Mm) 1.2 Thickness Of Frp/Plastic Sheet (Mm) 1-2 , Sanitary Pad Disposal / Incinerator Machine General Type Floor Mountable Purpose Burn Used Sanitary Napkins To Sterile Ash And Stop Automatically Color Operation Mode Electronically Operated, Fully Automatic Loading Type Top Loading Stand Provided Yes Number Of Chambers Two Trap Door Available Yes All Ms Parts Powder Coated Yes Spare Parts Should Be Available For Minimum 5 Years From Date Of Supply Yes All Electrical Parts Are Isi Marked Yes Dimensions Of Main Unit Thickness Of Thermal Insulation Material (Mm) 40 Millimeter Thickness Of Ms/Ss Sheet Of Housing Cabinet (External) (Mm) 1.2 Millimeter Thickness Of Ms/Ss Sheet Of Burning Chamber (Internal) (Mm) (Min) 3 Millimeter Machine Width(Mm) 401-500 Machine Depth (Mm) 501-700 Machine Hight(Mm) 901-1200 Machine Weight(Kg) 51-250 Door Width(Mm) 500-100 Door Height(Mm) 151-200 Thickness Of Door Including Insulation (Mm) 25 Millimeter Internal/Burning Chamber Shape Vertical Cylindrical Flexible Emission Outlet Pipe Dia (Mm) 76 Millimeter Detachable Ash Tray Length (Mm) 301-400 Detachable Ash Tray Width (Mm) 151-200 Detachable Ash Tray Height (Mm) 31-50 Stand Height (Mm) 500 Millimeter Stand Width (Mm) 200-300 Stand Depth (Mm) 100-200 Material Of Machine Unit Material Of Housing Cabinet (External) Mild Steel(Crca) Sheet Material Of Burning Chamber (Internal) Stainless Steel Sheet Of Ss-304 Grade Finish Of Ms Parts Of Cabinet Na Material Of Thermal Insulation High Density Ceramic Fiber Sheet Constructional Features Thermal Insulation Of Burning Chamber Housed In Outer Chamber Yes Burning Chamber Tray Provided Yes Emission Outlet Pipe Location Top Of Machine Means Of Connecting The Unit Outlet With Flue Gas Emission Pipe Flanged Type Of Door Lock Provided Latch Lock Control & Functional Features Temperature Indicator Provided Yes Timer Provided Yes Auto Cut-Off Temperature Display Yes Digital Display To See Actual And Set Temperature Yes Minimum Burning Temperature (Degree C) 800 Burning Capacity Per Day (Number Of Napkins) 700-1000 Burning Capacity At A Time (Number Of Napkins) 26-50 Residue Ash Per Napkin (Gms) 2 Gram Burning Time Of Full Capacity Napkins/Pads (Minutes) (Max) 30 Minute Skin Temperature Of The Unit Under Operation (Deg C) 16-20 Installation, Training, Demonstration And Plumbing Included Yes Electrical And Safety Features Automatic Digital Controller For Time Yes Automatic Digital Controller For Temperature Yes Equipment On/Off Indicator Provided Yes Power Supply 230V +/-10%, 50Hz, Single Phase, Ac Supply Electrical Power Consumption(Watt) 500-1000 Minimum Length Of Power Chord To Be Supplied Along With Machine (Mtr) 2 Meter Type Of Heater Ceramic Heater Containing Coil Power Saver (Auto Power Cut-Off) Yes Safety Mcb Provided (16A To 30A) Yes Protection Against Electric Shock When Checked As Per Is:302-1/2008 Yes Minimum Insulation Resistance (Ir) At 500 Vdc (Mega Ohm) 2 Maximum Electrical Insulation And Leakage Current As Per Is:302-1/2008, (Ma) 0.21 Maximum Earthing Continuity Test When Tested As Per Is:302-1/2008 (Ohm) 0.1 Hv Test At 1000 V Rms For 1 Sec When Tested As Per Is:302-1/2008 No Breakdown Shall Occur During The Test Smoke Control Unit (Scu) Type Of Scu (Smoke Control Unit) Top Mounted Material Of Housing Of Smoke Control Unit (Scu) Mild Steel(Crca) Cabinet Finish Of Ms Parts Of Scu Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Overall Height Of Scu (Mm) 300 Overall Width Of Scu (Mm) 100-300 Overall Depth Of Scu (Mm) 100-300 Number Of Chambers For Filteration Of Smoke Emission Two Both Carbon Control And Foul Odour Control Chambers For Filteration Of Smoke Emission Yes Number Of Filters In Carbon Control Chamber One Type Of Filters In Carbon Control Chamber Ceramic Blanket As A Filter Number Of Filters In Odour Control Chamber One Type Of Filters In Odour Control Chamber Activated Carbon Filter Blower Type Centrifugal, Direct Driven Blower Rpm 1800 Power Supply Of Scu 230V +/-10%, 50Hz, Single Phase, Ac Supply Minimum Length Of Flexible Emission Outlet Pipe To Be Supplied Along With Machine (Mtr) 3 Cost Of Additional Flexible Emission Outlet Pipe, If Required On Actuals To Be Paid By The User Yes Emission Standard For Smoke Conformity To Cpcb, Min Of Environment & Forests Standard, Solid Waste Management Rules (Swm), 2016 Yes Particulates (Half Hourly Average) (Mg/Nm3) (Max) 50 Hcl (Half Hourly Average) (Mg/Nm3) (Max) 50 So2 (Half Hourly Average) (Mg/Nm3) (Max) 200 Construction Of (Half Hourly Average) (Mg/Nm3) (Max) 100 Construction Of (Daily Average) (Mg/Nm3) (Max) 50 Total Organic Carbon (Half Hourly Average) (Mg/Nm3) (Max) 20 Hf (Half Hourly Average) (Mg/Nm3) (Max) 4 Nox (No And No2 Expressed As No2) (Half Hourly Average) (Mg/Nm3) (Max) 400 Total Dioxins And Furans ( 6 To 8 Hours Sampling Basis, Please Refer Guidelines For 17 Concerned Congeners For Toxic Equivalence Values To Arrive At Total Toxic Equivalence) (Ng Teq/Nm3) (Max) 0.1 Cd + Th + Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Hg And Its Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Sb+As+Pb+Cr+Co+Cu+Mn+Ni+V+Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.5 Loss On Ignition (Max) (% Dry Weight Of The Material) 5 , Water Cooler 60 Ltr/80 Ltr/100 Ltrtype Storage Cooling Capacity Litres/Hour 60/80/100 Liters/Hour Storage Capacity 80 /60/100 Liter Maximum Energy Consumption (Watt) 775 Watt For 60 Ltr/Hr Cooling Cap. Power Factor 0.85 Eco-Friendly (Non Cfc Refrigerant) Es Water Tank Sheet Material And Thickness Stainless Steel (Grade Aisi 304) With Puf Insulation, Thickness =0.6 Mm Water Tank Cover And Lid Bottom Sheet Material High Impact Polystrene(Hip) Water Tank Cover And Lid Bottom Sheet Thickness 1.5 Millimeter Cooler Cabinet Sheet Material Stainless Steel (Grade Aisi 304) Cooler Cabinet Sheet Thickness 0.8 Millimeter Warranty On Machine 1 Year , Ss Skid- The Basic Assembly Of Ro Is Mounted On The Skid The Quality Of The Skid Is Made Of Stainless Steel 304 -For Suitable For 1000 Ltr Ro , Raw Water Tank The Filtered Product Water Is Stored In This Tank. This Tank, Too Is Maded Pvc 4 Layer Food Grade Tank Capicity : 3000 Ltr-For Suitable For 1000 Ltr Ro , Treated Water Tank . The Filtered Product Water Is Stored In This Tank. This Tank, Too Is Maded Stainless Steel Water Tank Steel Grade 304 Food Grade Tank Capicity : 1000 Ltr. -For Suitable For 1000 Ltr Ro , Raw Water Pump The Rwp Sucks Water From The Raw Water Tank & Forwards It To The Ro System. Having Capacity Of 3000 Lit Per Hr. Of Self Priming Centrifugal Pump Its Make Of Cri/Groundfos .5 To 1Hp Power Consumption And Pressure 3-4 Kg Per Sq.Cm Etc Complete-For Suitable For 1000 Ltr Ro , Pressure Sand Filter Pressure Sand Filter Is Of Vertical Type Of Diameter 13 Inches And 54 Inches In Height Having Volume Of 110Liters (Pentair) Made Up Of Frp Its Operation Type Is Manual Multiport Valves Etc Complete -For Suitable For 1000 Ltr Ro , Pressure Carbon Filter Pressure Carbon Filter Is Of Vertical Type Of Diameter 13 Inches And 54 Inches In Height Having Volume Of 110Liters (Pentair) Made Up Of Frp Its Operation Type Is Manual Multiport Valves Etc Complete -For Suitable For 1000 Ltr Ro , Anti Scalnt Dosing System -Having Pump In A Set Made Of Edose It Is Electronic Diaphragm Type Its Capacity Is 0.3 Liter Per Minute. Having One Hdpe /Plastic Tank Capacity 80 Liters. -For Suitable For 1000 Ltr Ro , Cartidge Jumbo Filter Housing Cartidge Jumbo Filter Housing In Two Numbers Made Of Food Grade Pp And Diamentions Are 20X4 -For Suitable For 1000 Ltr Ro , Jumbo Micron Cartidge Filter 2 Nos - It Is Made Of Poly Propylene And Having Flow Rate Is 5000 Lit Its Diamentions Are 20 X 4 Its Rating Is 5 Micron In 2 Nos-For Suitable For 1000 Ltr Ro , High Pressure Pump -It Has The Power Of 3Hp It Is Vertical Centrifugal Multi Stage Pump Make Of Cri/Cnp/Shakti Hpp Sucks Water From The Micron Filter & Passes It To The Membrance. -For Suitable For 1000 Ltr Ro , Pressure Tube Ro Module Consisting Of Membrane Housing With Ro Membrane Mounted On Skid It Is Made Of Ecoline (Penteir)Uki/Ss Its Size Is 8X40 In A One Number -For Suitable For 1000 Ltr Ro , R.O Membrane The Membrane Contains Minute Holes Of Size 0.0001 Micron.As A Result No Bacteria Or Any Virus Can Pass Through This It Its Tfc Polymide And Size Is 40 Diameter And 40 Length Make Of Hydronautics Cpa-2 Equivalent -For Suitable For 1000 Ltr Ro , Flow Indicator Flow Indicators In Two Numbers Made Up Of Flot Type Pannel Mountedits Max Temp 40 Degree Cal.And Measured At Ro Module Product Flow And Ro Module Reject Flow-For Suitable For 1000 Ltr Ro , Pressure Gauge -Pressure Gauge Are In Two Nos And Range In Between 0 To 20 Kg / Sq Cm Its Location Are At Ro Module Inlet And Ro Module Reject Flow-For Suitable For 1000 Ltr Ro , High Pressure Switch And Low Pressure Switch- These Are In Two Numbers Locations Are One Before High Pressure Pump And Another Is After. -For Suitable For 1000 Ltr Ro , Pressure Controlled Valvex -These Are In Two Numbers Locations Are One Before High Pressure Pump And Another Is After.-For Suitable For 1000 Ltr Ro , Flushing Switch With Solenoid Valve-Size : 3/4 Inch Working 230Volt Ac.-For Suitable For 1000 Ltr Ro , Electronic Panel Board - The Mains Supply Is Connected To The Panel Board. The Ro Is Controlled By The Panel Board. -For Suitable For 1000 Ltr Ro , Water Dispenser Machine(Water Atm)- (Atm)Aster Make With Digital Panel & Control Sensor And 100 Scratch Cards-For Suitable For 1000 Ltr Ro , Supplying Of Water Controller Sensor (Flot Type) At Site As Directed By Incharge Of Work. -For Suitable For 1000 Ltr Ro , Multiport Valve - Supplying Of Multiport Valve Manually Operational Required For The Pressure Sand Filter Including All Charges At Site As Directed By Incharge Of Work -For Suitable For 1000 Ltr Ro , Other Accecories - Providing Walls/ Ceiling/Floors, Medium C.P.V.C. (Chlorinated Poly Vinyl Chloride) Pipe Having Embossed Isi Mark On It, Of Required Diameter With Screwed / Plain Sockets, Joints, Necessary C.P.V.C. And Brass Fittings Such As Sockets, Back Nuts, Elbows, Bends, Tees, Reducers, Enlargers, Plugs, Clamps Etc. - For Suitable For 1000 Ltr Ro , Water Level Switch Providing Ball Cock Medium Type With Pvc Float Including Sockets And Necessary Fittings And Tested As Per Municipal Requirement, Testing Etc. Complete. 40Mm-For Suitable For 1000 Ltr Ro , Chiller -Cooling Capicity : 300 Lph Working Tempreture 25Degree To 15 Deegree.Cerculation Pump. Chiller Ms Stand. Working Full Automatic. Dry Run Indication - For Suitable For 1000 Ltr Ro , Stabilser -Working Up To Volt Single Phase 160V To 260V. 15Kva -For Suitable For 1000 Ltr Ro , Chiller Plumbing -Pvc Pipe Suitable Of 1000 Ltr Ro And Chiller -For Suitable For 1000 Ltr Ro , Green And Blue Garbage Tri-Cyle Rickshaw Color Green And Blue Seating Capacity 1 Maximum Run Unlimited Usage/Application Waste Collection Size/Dimension 250 Litre X 2 , Standard Aluminium Anodized Crutch Under Arm Crutches 1 Pieces Constructional Parameters Type Of Crutches Crutch Under Arm Crutch Tips Size 7/8 Inch Size Type Standard Size In Centimeter 60 Centimeter Material Of The Type Selected Aluminium Anodized Performance Parameters Type Of Hand Grip Na Height Of Rod Adjustable Upto (Centi Meter) 100 Centimeter Fitted With Non - Slip Rubber Shoe Yes Adujstable Rod Type Yes , Medium Aluminium Crutch Elbow Or Forearm Crutches 1 Pieces Constructional Parameters Type Of Crutches Crutch Elbow Or Forearm Crutch Tips Size 3/4 Inch Size Type Medium Size In Centimeter 50 Centimeter Material Of The Type Selected Aluminium Performance Parameters Type Of Hand Grip L Height Of Rod Adjustable Upto (Centi Meter) 86 Centimeter Fitted With Non - Slip Rubber Shoe Yes Adujstable Rod Type Yes , Plastic First Aid Kit With Medicines Crepe Bandage (Unit-1, Size: 6 Cm) Adhesive Bandage (Unite-1) Adhesive Bandage Round 25Mm (Unite-1, Size: 25 Mm) Pain Relief Gel (Unite-1) Povidone Iodine Ointment(Unite-1) Oral Clinical Thermometer (Unite-1) Antiseptic Liquid (Unite-1) Absorbent Cotton I.P. (Unite-1) Microporous Surgical Tape (Unite-1) Paracip/Parachoice (Unite-1) Gauze Swab (Unite-1) Roller Gauze Unite-1, Size: 7.5 Cm) A Pair Of Scissors (Unite-1, Size: Small) First Aid Leaflet Sticker (Unite-1) , Mortuary Cabinet Freezer Door Material Stainless Steel Refrigeration System- Unitary Type Rtu-06 Number Of Bodies 1 Trolley Material Stainless Steel Body Material Stainless Steel Technical Specification Integral Temperature Gauge Yes Electronic Temperature Indicator Cum Controller No Separate Doors And Handles For Each Chamber Yes Refrigerant Gas R134a Temperature Display Led Temperature Of Mortuary Cabinet(Degree Celsius) -15 Degc To 10 Degc Internal Lighting Vapor Proof Incandescent Lamp Insulation Thickness 50 Millimeter Locking System Standard Key Locks Trolley Sliding On Telescopic Rails No Defrosting Type Na Safety Alarm Visual Insulation Between The Walls High Grade Polyurethane Type Of Alarm Temperature Variation Alarm Internal Drainage Yes Air Circulation Forced Air Circulation Power Suppy Voltage,+/-10% 230 Volt Phase Single Phase Frequency 50 Hertz Dimension & Size Height 800 Millimeter Width 800 Millimeter Height With Cooling Unit And Plain Cement Concrete Platform 800 Millimeter Depth 2000 Millimeter , Pre School Uniform For Girls And Boys Including Tie , Socks And Shies In Anganwadi Center (Check Pattern In Colours As Per Buyers Requirements Description Pinafore With Embedded Collar And Sleeves For Anganwadi, Preschool Childrenutility Girls And Boys Size ( 1 To 5 Yrs Kids ) Dimensions And Pattern As Per Sketch And Dimension Chart For Icds Pre-School Uniforms- Pinafore With Embedded Collar And Sleeves For Children Of Anganwadi Centers In Mharashtra , Sketch And Dimensional Chart For Pre School Uniform- Pinafore Has Been Seen And Understood Yescollar Reinforcement With Reinforcementopening Opening At Back Upto Waist Portion With Buttonsbelt At Waist Portion As Per Buyers Requirementsnumber Of Loops For Belt2 Material-Pinafore Fibre Composition (Warp & Weft) Polyester Staple Fiber ( Psf ) - 70% And Viscose - 30% ( Tolerence ± 5% ) ( Test -Method Is: 3416 , Part - 1 ) Count Of Yarn, Warp (Ne) 2/30S ( Tolerence ± 5% ) ( Test Method - Is: 3442 ) Count Of Yarn, Weft (Ne)15S ( Tolerence ± 5% ) ( Test Method - Is: 3442 ) No Of Threads, Warp ( Ends Per Inch )46 (Tolerance + 5% / - 2.5%) No Of Threads, Weft ( Picks Per Inch ) 46 (Tolerance + 5% / - 2.5%) Mass ( Gram Per Sq Mtr ) 145 To 150 Gram ( Test Method - Is : 1964 ) Weave Plain Material- Sleeves| Top Portion Including Collar ( Embedded Stitched Shirt Fabric ) Fibre Composition - Warp 100% Polyester Filament Yarn ( Pfy ) Full Dull Roto Yarn Fiber Composition - Weft White Yarns - 100% Cotton, Colour Tex X 3, Polyester Stitches Per Dm 35 To 40 Raw Edges, If Any Shall Be Bound By Overlock Stitching Yes Colour Of Pinafore Any Other Colour As Per Buyers Requirement Colour/ Pattern Of Embedded Shirt Fabriccheck Pattern In Colours As Per Buyers Requirements Colour Fastness To Light Change In Colour 4 Or Better ( Test Method - Is : 2454 ) Colour Fastness To Washing Change In Colour 4 Or Better , Stain On Adjacent Fabric 3 - 4 Or Better ( Test Method - Test C (3), Is / Iso 105 - C10 ) Colour Fastness To Perspiration Change In Colour 4 Or Better , Stain On Adjacent Fabric 4 Or Better ( Test Method - Is : 971 ) Colour Fastness To Rubbing Dry 4 Or Better , Wet 3 Or Better (Test Method - Is : 766 ) Logo & Marking Logo Marking As Per Buyers Requirements Type Of Logo Embroidery Number Of Logos 2 Size, Design And Location Of Logo As Per Buyers Requirement Yes , Isi Mark Inverter Tubular Battry Battery Type: Tall Tubular Inverter Battery That Provides Many Years Of Service; Construction: Rugged Construction; Water Level Indicators: 6 Nominal Voltage: 12V; Rated Capacity At 27 Degree Celsius: 200 Ah; Electrolyte Volume: 19.90 Liter; Safety: Overload Protection With Auto Reset Dimensions Of The Container (L X W X H): 502Mm X 191Mm X 440 Mm Dry Battery Weight: 34.3Kg; Filled Battery: 59.0 Kg [Charging Current] Boost Mode Starting Current: 20.20; Boost Mode Finishing Current: 10.10;[Trickle Mode] Min: 168 Ma; Max: 672 Charging: Fast Battery Charging With Adaptive Battery Charging Control Technology Efficiency: Highly Efficient Battery Which Is Ideal For Heavy-Duty Application With Excellent Overcharge Tolerance, Superior Performance During Long Frequent Power Cuts, And Minimum Maintenance , Isi Mark Starter For 5 Hp Submersible Motor Pump Provided With 16 Amps Lt1 Type Contactor 4 Pole [Ac3 Motor Duty] With Easy Replaceable Heavy Duty Fixed And Moving Contacts And Coil Voltage Range Between 280-480 Volts With Easy Replacement Of Coil. Thermal Overload Relay Ensures Overload Protection And Manual Reset Facility [Range ?9~14 Amps For 5 Hp Motor Pump] Starter Provided With Red, Yellow And Blue Neon Bulbs For 3 Phase Power Indication. , Photo With Frame Standard Size For Office As Per Requirement Of Photo Like (Chhatrapati Shivaji Maharaj/Rajmata Jijau/Savitribai Fule/Mahatma Gandhi/Dr.Babasaheb Ambedkar Etc) , Foot Basic Sewing Machine Floral Face Plate And Arm Side Cover Round Stitch Indicator Plate Nickel Plated Needle Bar Auto Trimping Spring Loaded Bobbin Winder For Uniform Winding Of Bobbin Sheet Metal Bobbin Winder , Solar Hi Mast Complete 1 Set Of 20 Watt [20 Watt X 4 Light,Panel 75 Watt Panel X Qty, 20Ah Battery X4, 6 Hr Constand After 6Hr Dim With Motion Sensor =Total 12Hr Backup,Oct 6Mtr Pole, Foundation Bolt, Solar Panel Structure X 4, Light Arm X 4, Labour Charges, Foundation Materail, Wire] , All In One 9W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55, Ip66 Lighting Color Cool White Lumens 1170 Features Inbuilt Battery And Solar Panel Battery Capacity 12.8 V 6 Ah Maximum Lumens 1170 Pole Height5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 30W Color Temperature Range 2700K-6500K Cri 70-82 Material Typemetal) , All In One 12W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 1560 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 12 Ah Maximum Lumens 1560 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , All In One 15W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 2000 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 15 Ah Maximum Lumens 2000 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , All In One 18W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 2000 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 15 Ah Maximum Lumens 2000 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 24 X 48 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 60 X 90 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 90 X 180 With Frame Yes , Isi Mark Starter For 12 Hp Motor Pump Provided With 16 Amps Lt1 Type Contactor 4 Pole [Ac3 Motor Duty] With Easy Replaceable Heavy Duty Fixed And Moving Contacts And Coil Voltage Range Between 280-480 Volts With Easy Replacement Of Coil. Thermal Overload Relay Ensures Overload Protection And Manual Reset Facility [Range ?9~14 Amps For 5 Hp Motor Pump] Starter Provided With Red, Yellow And Blue Neon Bulbs For 3 Phase Power Indication. , Belan Polpat Belan Wooden Chapati Maker Circular Board With Rolling Pin Set Wooden Circular Board Hand Made , Flash Cards Learning & Education Game For Kids Alphabets 52 Cards With Pictures , Aluminium Patila Big 110 Ltr Technical Properties Height 14 Inchgrade Nathickness Lid 2 Inchstrong Handle Withdiameter 40 Inchmaterial Stainless Steeltype Patilathickness Body 3.5 Inchcapacity 110 Liter , Iron Kadhai 150 Litre Technical Properties Thickness Of Kadhai (Mm) 6 Outer Diameter Of Kadhai (Mm) 310 Depth Of Kadhai (Mm) 50 Diameter Of Handle Rod In (Mm) 5 Capacity Of Kadhai( In Litre) 150 , Flash Cards Learning & Education Game For Kids Alphabets 52 Cards With Pictures , Alpha Numeric Plastic Leeter World -Educational Toys For 3-8 Year Olds Girls Boys, 105 Pcs See And Spell Learning Toys, Matching Letter Spelling Game Sight Words Games Educational Preschool Toys , Kids Painting Set Including 1 Mini Pre- Drawn Canvas Panel With Easel And 6 Poster Colors Set With A Painting Brush For Kids Hobby Learning Painting Drawing Art And Craft Diy Sets Gift Sets, , Ceiling Cleaning Broom/ Multi Purpose Broom Stick (Spider / Cob Web) , Magical Handwriting Workbook(4 Book) With (1 Pen+4 Refill)Pen And Refills , 6 Puzzle Board - Birds,Flower, Vegetable Fruits, Transport And Animals (Multicolor) , Flexible Long Garden Water Pipe/Pvc Pipe/Garden Outdoors Pipes With Hose Connector Per Mtr , Chalk Multicolour Writing Chalk, 50 Chalk Sticks In The Box , Chalk White Or Single Colour Writing Chalk, 50 Chalk Sticks In The Box , 36 Pieces Alphabet & Number Floor Mats For Kids, Puzzle Eva Foam Mat For Children , Portable Foldable Wheelchairs For Handicap Patient Old People Children Manual Wheelchair (Self-Propelled Wheelchair) , Vacuum Cleaner Wet And Dry 1150-Watt Powerful Suction And Blower Function , Stethoscope Exterior Finish Brass;Chrome Item Dimensions Lxwxh 26 X 13 X 3 Centimeters Material Metal , Toy Counting Frame Plastic Approx: Width320 Mmheight440 Mm , Blanket (Dimension Approx Length Of The Blanket 230 Centimeter Width Of The Blanket 150 Centimeter Mass Mass 685 Gram Mass Per Blanket 2.3 Kilogram) , Round Table With Chair Set [Front Round Table,L54 X W30 X H20,Kids Chair L13 X W15.5,H20 X 5Qty] , Magnetic Board For Kids [2 Way Board One Sude White & One Side Black Board With Magnetic Alphabets & Number L15 X W20 X H54] , Commercial Slide Ladder (Preschool Kit) Virgin Polyethylene And Full Arch Shape , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 24 X 48 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 60 X 90 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 90 X 180 With Frame Yes , Magazine Stand Revolving Made By Iron With Powder Coated Finish. Easy To Move. Having 16 Pockets. , Curtnes For Windows Material Silk Gsm Quality 300 Material Care Machine Wash,Hand Wash,Dry Clean Lining Included Yes Color As Per Grampanchayat Choice. Patterns Plain Fitting Eyelits Per Sq Mtr , Table Top Glass Thickness 12Mm Type Of Glass Toughened, Heavey, Break Resistance, Smooth, Sqr Per Feet , Stainless Steel Serving Tray (Large Size) For Serving Water And Dishes , Serving Tray Set Of 3 For Coffee/Tea/Breakfast(Printed Design) , Head Pins Fine Satin Pin Craft, Stainless Steel, 1 1/16 Inch Single Box 100 Pcs , Stamp Pad, 110 X 69 Mm - Violet/Red /Black Small , Stamp Pad 155 X95 Mm Violet /Red /Black Small Large , Mirror Plastic Frame Mirror In Square Shape With Shelf Display Area Of Mirror Is 8 Inch By 11 Inch Appx , No Dust Broom Xl For Floor Cleaning, Long Handle Broom Stick For Home Floor Cleaning , Electrical Needle Syringe Destroyer/Needle Destroyer For Hospital And Laboratory , Iron Patient Hospital Basic Examination Table 1830 Mm (L) * 575 Mm (W) * 850 Mm (H) , Iron Patient Hospital Bed Manual White Hospital Bed, Stainless Steel/ Iron With Coted, Size/Dimension: 3 X 6 Feet , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Thap Dhol (S.S),17.2 Inch, Silver Steel Drum Duga Nut & Bolts Dholak , Side Drum Steel 14 Inch With Belt, Stick And 2 Fiber Sheet Free Acoustic 1 Drum Kit Set (Professional, Student) , Standard Cotton Swing For Kids Baby Jhula Washable 1-8 Years With Safety Belt , Magic Speed Rubics Cube 3 * 3 * 3Puzzle(Size 2.5 Cube) , Alcohol Based Hand Sanitizer/Hand Cleanser 5 Ltr Can , Alcohol Based Hand Sanitizer/Hand Cleanser 500 Ml Sprey Bottle , Alcohol Based Hand Sanitizer/Hand Cleanser 100 Ml Sprey Bottle , Alcohol Based Hand Sanitizer/Hand Cleanser 50 Ml Sprey Bottle , Trolley Spekar Driver Type 2 Subwoofer, 2 Atellitesbt/Usb/Sd/Fm/2 Wireless Mike , 5 Layer 30 * 30 Inch Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel Kitchen Rack Utensil Rack Utensil Stand , Baby Weight Slater ( Hanging Scale Tubular Spring Balance Dynamo Meter Up To 5 Kg With 1 Baby Hanging Bag) , Mixer Grinder 550 Watts With 3 Multi Ouroose Grinding Jars Technical Specification: Voltage Supply 230 V Ac 50 Hz Motor Wattage550 Watts... Rating 30 Minutes. . Speed Control Switch 3 Peed With An Incher. Speed 1500 (Rpm) ( No Load). Body Material Abs Plastic .. Jar Material Stainless Steel .. Blade Material Stainless Steel . Dome Material Polycarbonate .. Rated Liquidizer Jar Capacity 1.50 Ltr. Rated Grinding Jar Capacity 150 Ml ... Normal Load 150 Gm Urad Dal Well Soaked In Water , Resilient Seated Cast Iron Double Air Relief Valves For Water Works Purposes Standard Type With In-Built Isolating Valve(Ds 1) Nominal Pressures Pn 1.6 Specificationconformity To Specification Is 14845:Latest Isi Marked Yes Material Material Of Stem High Tensile Brass-Hsb1 Material Of Low Pressure Seat Ring And Face Ring Epdm Material Of High Pressure Orifice High Tensile Brass Material Of Stem Nut High Tensile Brass Material Of Body Seat Ring Stainless Steel Material Of Bolts Stainless Steel Material Of Nuts Carbon Steel Material Of Gland Packing Jute Material Of Float(High Pressure Orifice) Timber Core With Rubber Coating Material Of Float Guide High Tensile Brass Dimension Nominal Size Of Single Air Valve(Small Orifice) S1 Na Nominal Size Of Single Air Valve(Large Orifice) S2 Na Nominal Size Of Standard Double Air Valve With In-Built Isolating Valve(Ds 1) Na Nominal Size Of Standard Double Air Valve Without Isolating Valve(Ds 2) Na Nominal Size Of Kinetic Air Valve(Dk) Na Direction And Colour Direction Of Operation Clock Wise Colour Black/Blue , Resilient Seated Cast Iron Single Air Relief Valves For Water Works Purposes Standards Specification Conforming To Standard As Per Is:14845 (Latest) Whether Product Is To Be Isi Marked? Yes Cml No If Isi Marked (Write Na If Not Isi Marked) Na Generic Valve Types Single Air Valve Temperature Rating Upto 45 Deg C Maximum Permissible Gauge Working Pressure(Mega Pascal) 1.6 End Connection For Single Air Valve Screwed Type According To Is:554 End Connection For Double Air Valve Flanged Type According To Is:1538 End Connection For Kinetic Air Valve Flanged Type According To Is:1538 Size & Dimension Nominal Size Of Single Air Valve 50 Millimeter Nominal Size Of Single Air Valve 50 Millimeter Nominal Size Of Kinetic Air Valve 50 Millimeter Material Body And Component Parts As Per Clause 9.1 Of Is:14845 (Latest) Coating Material Type B Of Is:341 (Latest) Body Thickness As Per Clause 10.2.4 Of Is:14845 (Latest) Float Diameter As Per Clause 10.5.1 Of Is:14845 (Latest) Marking Marking As Per Clause - 15 Of Is:14845 (Latest) , Swing Check Type Reflux (Non-Return) Valves For Water Works Purposes Type Type Illustration Of Reflux Valve With Inclined Seating And Side By-Pass Arrangement Specification Conformity To Specification Is 5312 (Part 1) Latest Product Is Bis Marked Yes Material Material Of Body , Door , Bearing Holder Grey Cast Iron Material Of Hinge Pin , Door Pin And Door Suspension Pin Stainless Steel Material Of Body Seat Rings Stainless Steel Material Of Door Face Ring Stainless Steel Material Of Bearing Bushes/Bearing Block P.T.F.E Material Of Plugs For Hinge Pin/Air Release Plug Stainless Steel Material Of Gaskets Compressed Asbestos Fibre Material Of Hinges Malleable Cast Iron Dimension Nominal Sizes Of Reflux Valve (Mm) 350 Type Of By-Pass Valves (As Per Is 778) Class 1 For Pn 1.0 Mpa , Rod 4 Feet Zig Zag , Rod 5 Feet Regular , Rod 1 Feet Regular , Standard 28Mm Rubber Weight Plates (2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories , Dumbels Rubber Coated 2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One , Leg Curl / Leg Extension Main Frame: Large Rounded Rectangular Pipe,Cushion: Made Of Pu,Shroud: Metal Shroud With One Step Injection Moulding, Seat Adjustment : 5 Level Adjustment System, Adjustable Range : 0-100Mm, Guide Rail : Made Of Alloy Steel, Pulley : Made Of Engineering Aluminium, Handlebar : Pvc, Weight Plate : Alloy Steel, Guide Rod : Stainless Steel Hollow Pipe, Steel Cable : Max Load 1000 Kgs, Passes 100,000 Rounds,Weight Stacks : 110 Kgs , Bicep Curl Machine ,Pulley: Cast Iron, Ø106x20mm, With Sealed Bearing, Cable: Steel Cable Ø3.5 Jacketed With Pvc Ø5.5Mm Outside Diameter, Powder Coating: 2 Rounds (Silver/Black/Dark Grey Varnish), Tube 1: Oval Elliptical Tube, 60*120Mm T.: 3Mm, Tube 2: Round Tube, Dia 90Mm T.: 3.0Mm, Weight Stack: Made Of Cast Iron, Stuffing: Pu Foam With Synthetic Leather, Wrap Around Gas Assist Seat Adjust, Unilateral Motion, Converging Axis, Right And Left Pre-Stretch Positioning, Contoured Upholstery With Lumbar Support, Size: (L)1000*(W)1500*(H)1600Mm Stack Weight 80Kgs-N.W.: 248Kgs , Adjustable Squat Rack Stand Material Alloy Steel, Product Dimensions ?23.54D X 41.8W X 59.5H, Style ?Adjustable, Item Weight16.32 Kilograms, Number Of Racks ?2, Weight Limit?600 Pounds , Calf Muscle Machine Product Dimensions 152.4D X 61W X 48.3H Cm, Frame Material ?Iron, Weight Limit ?250 Kg , Stepper With Riser For Gym Adjustable Height In 3 Steps:15Cm, 20Cm,25 Cm, Non Slip Top Surface, Dimension: 100 X 38 X 15/20/25Cm, Weight Apx. 8 Kg , Gym Dumbbell Rack Material Iron, Product Dimensions 45D X 40W X 60H Centimeters, Style ?Multi-Level, Item Weight ?17000 Grams, Number Of Racks ?3, Weight Limit ?1000 Kg. , Weight Plates Storage Rack For Gym Material ?Iron, Product Dimensions ?68D X 57W X 119H Cm, Style Weight Plate Tree, Item Weight?2Kg, Number Of Racks 6, Weight Limit 300 Kg, Frame Type Weight Plate Tree. , Yoga Mat For Women And Men Material ?Thermoplastic Elastomers, Product Dimensions 182L X 60W X 0.6Th Cm , Submersible Pump Solar Micro Pumping System Capacity 7.5 Hp Specifications: Model Number As Per Mnre Specification Model-Ii Motor Capacity 7.5 Hp, Pv Array (Wp)M Others, Shut Off Dynamic Head 45 Meter, Types Of Motor Pump Set, Submersible Pump, Pump Set Type, A.C. Induction Motor Pump Set With A Suitable Inverter Pv Array Operation Of Spv Pumping System The Spv Water Pumping System Should Be Operated With A Required Pv Array Capacity Measured Under Standard Test Conditions (Stc). Number Of Modules In Series And Parallel Could Be Used To Obtain The Required Pv Array Power Output24 ,The Power Output Of Individual Pv Modules Used In The Pv Array, Under Stc (In Watts Peak)335, Source Of Pv Module Indigenously Produced Pv Module (S) Containing Mono/ Multi Crystalline Silicon Solar Cells Efficiency Of The Pv Module (%)17 Fill Factor For Pv Module (%)70. Types Of Motor Pump Set Submersible Pump Pump Set Typen A.C. Induction Motor Pump Set With A Suitable Inverter, Numbers Of Poles Of Motor2 Motor Speed(In Rpm)2800. Bore Size 6 Inch, Delivery Size 2.5 Inch, Suction Head For Surface Pump 6 Meter, The Suction/ Delivery Pipe (Gi/Hdpe), Electric Cables, Floating Assembly, Civil Work And Other Fittings Required To Install The Motor Pump Set Yes, Inclusive Material Of Suction Pipe,Isi Marked Hdpe Pipe To Is 4985 Length Of Suction Pipe 45 Meter, Material Of Delivery Pipe Isi Marked Hdpe Pipe To Is 4985 Length Of Delivery Pipe 45 Meter, Pump Material Construction Of The Pump Be Made Using Parts Which Have A Much Higher Durability And Do Not Need Replacement Or Corrode For At Least 1 Years.Marking On Motor Pump The Following Details Should Be Marked Indelibly On The Motor Pump Set A) Name Of The Manufacturer Or Distinctive Logo. B) Model Number. C) Serial Number. , Usb Rechargeable Electric Gas Lighter For Kitchen Gas Stove(Windproof , Flameless, Smarter , Safer -Gas Lighter Chargeable Plasma Technology Generates A Windproof Plasma Annual Rate Contract Pulse Hotter Than Fire , Low Sound, Multi-Purpose Usage To Easily And Safely Fulfill All Your Lighting Needs ; No Butane , No Flame , A Eco Friendly , Cleaner , Easier And Safer Way To Light Usb Rechargeable -Long Lighter For Candle Plazmatic Lighter Comes With The Usb Cord , Could Be Charged With Any Usb Power Port ; Gets Fully Charged In About An Hour And Gives More Than 400 Sparks Or 3 Hours Of Use Per Charge ; Excellent Battery Life ,Multipurpose Use : Flexible Gas Lighter Ideal For Gas , Candles , Kitchens , Stovetops , Grill , Barbeque , Fireplaces , Fireworks , Lanterns , Fragrance Lamps , Pipes , Camping , Outdoors And Much More) , Standard 28Mm Rubber Weight Plates (2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Dumbels Rubber Coated Olympic 2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One Indoor Gym , Leg Curl / Leg Extension Main Frame: Large Rounded Rectangular Pipe,Cushion: Made Of Pu,Shroud: Metal Shroud With One Step Injection Moulding, Seat Adjustment : 5 Level Adjustment System, Adjustable Range : 0-100Mm, Guide Rail : Made Of Alloy Steel, Pulley : Made Of Engineering Aluminium, Handlebar : Pvc, Weight Plate : Alloy Steel, Guide Rod : Stainless Steel Hollow Pipe, Steel Cable : Max Load 1000 Kgs, Passes 100,000 Rounds,Weight Stacks : 110 Kgs Indoor Gym , Bicep Curl Machine ,Pulley: Cast Iron, Ø106x20mm, With Sealed Bearing, Cable: Steel Cable Ø3.5 Jacketed With Pvc Ø5.5Mm Outside Diameter, Powder Coating: 2 Rounds (Silver/Black/Dark Grey Varnish), Tube 1: Oval Elliptical Tube, 60*120Mm T.: 3Mm, Tube 2: Round Tube, Dia 90Mm T.: 3.0Mm, Weight Stack: Made Of Cast Iron, Stuffing: Pu Foam With Synthetic Leather, Wrap Around Gas Assist Seat Adjust, Unilateral Motion, Converging Axis, Right And Left Pre-Stretch Positioning, Contoured Upholstery With Lumbar Support, Size: (L)1000*(W)1500*(H)1600Mm Stack Weight 80Kgs-N.W.: 248Kgs Indoor Gym , Adjustable Squat Rack Stand Material Alloy Steel, Product Dimensions ?23.54D X 41.8W X 59.5H, Style ?Adjustable, Item Weight16.32 Kilograms, Number Of Racks ?2, Weight Limit?600 Pounds Indoor Gym , Calf Muscle Machine Product Dimensions 152.4D X 61W X 48.3H Cm, Frame Material ?Iron, Weight Limit ?250 Kg , Stepper With Riser For Gym Adjustable Height In 3 Steps:15Cm, 20Cm,25 Cm, Non Slip Top Surface, Dimension: 100 X 38 X 15/20/25Cm, Weight Apx. 8 Kg Indoor Gym , Gym Dumbbell Rack Material Iron, Product Dimensions 45D X 40W X 60H Centimeters, Style ?Multi-Level, Item Weight ?17000 Grams, Number Of Racks ?3, Weight Limit ?1000 Kg. Indoor Gym , Weight Plates Storage Rack For Gym Material ?Iron, Product Dimensions ?68D X 57W X 119H Cm, Style Weight Plate Tree, Item Weight?2Kg, Number Of Racks 6, Weight Limit 300 Kg, Frame Type Weight Plate Tree.Indoor Gym , Yoga Mat For Women And Men Material ?Thermoplastic Elastomers, Product Dimensions 182L X 60W X 0.6Th Cm Indoor Gym , Hbnc Kit For Asha Worker Including 1. (Baby Weighing Scale With Sling Dial Type Analogue Display Light Weight Portable 25Kg- 1Nos.). 2. (Digital Thermometer, Pocket Type, Digital Display-1 Nos.) 3.(Digital Timer, Led Display, 2 Size -1 Nos.) 4.(A Suitable Bag To Carry All Things (With Nhm Logo)- 1Nos.) 5.(Cotton 400Gm-1 Nos.) 6.( Gauzes Swab 7.5X7.5 Cm(1 Pack Of 50 Nos)-1 Nos) 7.( Soap And Soap Case-1Nos) 8.( Baby Blanket Locally Made, Woollen Type, Size 120Cm X90cm-1Nos) 9.( Palada/Spoon Stainless Steel-1 Nos) , Multicolour-4K, Matte Vinyl Stickers Educational Like (Abcd, Human Body Parts, Good Habits /Bad Habit Etc.)As Per Requirement Wall Stick Chart For Anganwadi Rate Per Sq Feet , Baby Gift Kit Items Included In The Gift Pack: 1) Baby Shampoo - 100 Ml, 2)Diaper Rash Cream - 20 Gm, 3)Baby Massage Oil - 100 Ml, 4) Gentle Baby Soap - 75 Gm, 5) Baby Lotion - 100 Ml, 6) Baby Powder - 100 Gm, 7) Gentle Baby Wipes 12 Pieces(20 X 21 Cm). Branded Himalaya/Mee Mee/Johnsons/The Moms Construction Of Etc , 1.5 Hp Table Top Atta Chakki Mini Flour Mill Specification:Weight Approx.28, Capacity Approx. 10 To 12 Kg, Stone Size 7 Inch X 20 Mm, Electric Motor 1.5 Hp Single Phase, Rpm 960 Rpm, Voltage 220 V, Power Consumption1.2 Unit, Type Semi Automatic. , Grid Connected Rooftop Solar System 1Kw Solar System Specification: Capacity1 Kw Solar Panel, Qty.335 Watt X 3 Nos., Solar Inverter1 Kw (On Grid) ,Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc. ,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 2 Kw Solar System Specification: Solar System 2 Kw, Solar Panel Qty. 335 Watt X 6 Nos., Solar Inverter 2 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 3 Kw Solar System Specification: Solar System 3 Kw, Solar Panel Qty. 335 Watt X 9 Nos., Solar Inverter 3 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 5 Kw Solar System Specification: Solar System 5 Kw, Solar Panel Qty. 335 Watt X 15 Nos., Solar Inverter 5 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Clorine Dosing Machine Without Stand By System Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Clorine Dosing Machine With Inbuilt Stand By System Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Isi Mark Submersible Rope Yellow Borewell Submersible Pump Rope,Poly More Virgin And Braided Twisted Cord Twine Rope String (16 Mm,Per Meter Meter) , Aluminium Armoured Power Cable-50 Sq Mm 3.5 Core Product Category Aluminium Power Cable, Size Of Conductor 50 Sq Mm, Core 3.5 Core, Conductor Material Aluminium, Colour Black, Overall Diameter (Strip/Wire) 29.5 Mm / 27.9 Mm, Current Rating 140 Amp, Thickness Of Pvc Insulation 1 Mm, Min.Thickness Of Pvc Inner Sheath 0.3 Mm, Nominal Dimensions Of Armoui (Strip / Wire) 4 X 0.8 Mm, Min. Thickness Of Pvc Outer Sheath (Strip / Wire) 1.56 Mm, Max Dc Resistance Ohm 0.641 Ohm, Max. Ac Resistance Ohm 0.82 Ohm, Approx. Reactance At 50Hz Ohms/Km 0.08, Capacitance Mfd/Krr 0.24 , Stainless Steel Kitchen Pincers/Sandshi/Pakkad Style Modern, Product Dimensions 26.5L X 1W Cm, Item Weight ?160 Grams. , 1.5 Hp Table Top Atta Chakki Mini Flour Mill Specification:Weight Approx.28, Capacity Approx. 10 To 12 Kg, Stone Size 7 Inch X 20 Mm, Electric Motor 1.5 Hp Single Phase, Rpm 960 Rpm, Voltage 220 V, Power Consumption1.2 Unit, Type Semi Automatic. , Baby Gift Kit Items Included In The Gift Pack: 1) Baby Shampoo - 100 Ml, 2)Diaper Rash Cream - 20 Gm, 3)Baby Massage Oil - 100 Ml, 4) Gentle Baby Soap - 75 Gm, 5) Baby Lotion - 100 Ml, 6) Baby Powder - 100 Gm, 7) Gentle Baby Wipes 12 Pieces(20 X 21 Cm). Branded Himalaya/Mee Mee/Johnsons/The Moms Construction Of Etc , Multicolour-4K, Matte Vinyl Stickers Educational Like (Abcd, Human Body Parts, Good Habits /Bad Habit Etc.)As Per Requirement Wall Stick Chart For Anganwadi Rate Per Sq Feet , Pvc Pipe Cid Joint Rubber Ring For Pipe Line Material Rubber, Pvc Pipe, Structure Pipe, Hydraulic Pipe Brand, Bew Surface Finish, Paint Coated, Cid Joint Size Up To 1000Mm, 3 4 2.5 6 , Cast Iron Detachable Joints Material Ci Application, Pvc Pipe, Structure Pipe, Hydraulic Pipe Brand, Bew Surface Finish, Paint Coated, Cid Joint Size Up To 1000Mm, 3 4 2.5 6 , Stainless Steel Bowl/Vati/Katori-Size5- (9.5Cm Wide)(Capacity 150 Ml)
Contract Date: Dec 31, 2025 Contract Value : ₹ 1.57 Crore
Government Departments No of Bidders 3
Maharashtra View Result →
31.
Public Administrative Department #8488848 AOC
Modification Works Of Various Areas Of Multi Storey Building Of Kem Hospital. - SITC OF Antistatic Conductive/ Dissipative Flooring:Seamless with perfectly curved flush-covings, resistance to mechanical stresses and dynamic loads and having conductive protection characteristics, 2 mm thick, washable. 2 SITC OF Hermetically Sealing type of Manual Sliding /Swing Door having thickness of 40-48mm of size 1500 X2100 mm single / dual leaf with PUF core sandwiched between Antimicrobial High Pressure laminates (HPL), with viewing window of size 300 X 300 mm. The door leafs hung on extruded heavy duty aluminium alloy extrusion Doorframe for single side swing Doors, Sliding Door leafs runs on (nylon wheels) within an extruded heavy duty aluminium alloy extrusion track / frames, for smooth effortless slidingwith the help of handle. 3 SITC OF LED Peripheral Lights :Recess mounted IP54 Protocol, Non hygroscopic Peripheral Lights having power LED elements with suitable electronic driver and controls. The Peripheral light diffusers fixed in powder coated aluminium frame. (Size: 1000/1200 X 230 mm. 4 S & I of G.I. Powder Coated Rectangular Riser (Wall riser). 5 SITC OF Antimicrobial Coating:Filling of all Joints and cavities with metallic Epoxy Filler and Sanded Flush to provide a joint less finish and then sprayed with a water based liquid plastic aseptic and self sterilizing wall coating system to a d.f.t. of 300microns with primer. 6 SITC OF Surgeon Pendant: Double Arm Imported - Supply & Installation of Double Arm Surgeon Pendant with 800 + 800 mm long arm having weight carrying capacity of 150Kg, movable by 330°, Six Electrical Sockets 5/15 ampere & Data Point, Two adjustable monitor shelves, one fixed shelf with drawer and 6 nos. of Gas Outlets. 7 SITC OF Anaesthesia Pendant:Double Arm Imported - Supply & Installation of Double Arm Anaesthesia Pendant, with 800 + 800 mm long movable arm, movable by 330°. Having weight carrying capacity of approximately 80Kg, Six Electrical Sockets 5/15 ampere & Data Point, one adjustable monitor shelf, one fixed shelf with drawer and 6 nos. of Gas Outlets. 8 SITC OF LED Double Dome OT Light with Ceiling mountedDouble Dome LED OT lights having following features.- Light intensity Ec - 160 000 & 130 000 lux,- Light intensity adjustment - 5 – 100%- Color temperature Tc (with adjustment) - 3700 – 5000 K - Light field diameter d10 at Ec - 180 - 400 mm - Working range - 700 - 1400 mm - Color rendering index [Ra(1-8)] - > 93 ( > 95)* - Power supply - 90 – 250 V AC 9 SITC OF Writing Board (Size 950 mm x 650 mm) Flush with wall panel surface. 10 SITC OF Two Plate X-Ray Viewing Screen designed to provide a high level of control luminance without flicker. Size- 950 X 650 X 115 mm. 11 SITC of Integrated Control System have open construction / architecture enables integration of the equipment and devices, can be controlled by the system using touch panel or PC,which presents the visual interfaces of the devices. The operator from one place has the possibility to control devices, equipment, & Optional transmission, recording and displaying of the video signal (HD or SD). The operator have access to the hospital information system that stores information about patients. INTEGRATED Control features; OPERATING TABLES INTEGRATED CONTROL SYSTEM Enables remote control of the operating tables in operating block (OT). It can control all electro- hydraulic functional movements of the table. 12 SITC OF 2- Bay Scrub Sink, with Infrared Photo sensor, Digital Timer with user defined Time interval 1,3,5 and 10minutes,1 no. mixture valve and 1 nos. solenoid valves along with Manual Option Foot Operated mechanism/ Foot switch. Anti-splash metal body construction made of Stainless Steel Grade 304 polished finished. The Scrub Sink is provided with front access panel for ease of maintenance and repairs. 1 – Position size 1600 mm long. 13 SITC of Double duct Bed Head Horizontal Wall Panel 1200 mm. Separete duct for gas outet and seperate duct for electricals. (made up from Aluminum powder coated profiles) with double duct. Separate duct for electrical sockets and separate duct for gas outlet points. Each bed head panel should be pre piped and pre wired. It should have pre wired 8nos. electrical sockets in separate duct ( 4 nos. 5 A sockets and 4 nos. 15 A sockets). Gas outlet points 6nos. pre piped to be fitted in the bed head panel. Gas outlet points cost not to be included in the bed head panel cost since it is separate line item. It should have provision for RJ45 connector and Nurse call system bedside switch with partition between LV and ELV system. 14 GSS Ducting:- 24 SWG 15 GSS Ducting:- 22 SWG 16 GSS Ducting:- 20 SWG 17 Providing thermal insulation to supply air ducting with 19mm.thickness nitrile rubber. 18 SITC OF Unidirectional Laminar Air Flow Plenum Ceiling: constructed out of 1.2 mm thick SS 304 sheet of size 2800 X 2800 mm having 8 nos. of hepa filters. The hepa filters having dust spot efficiency of 99.99% 0.3 micron. Air & Light diffuser made of mono filament precision woven polyester for the plan air ceiling to give a LAMINAR FLOW of filtered air. It shall also have provision for diffused shadow less lighting system with Intensity control. 19 Replacement of existing damaged relief dampers by providing new gravity operate relief dampers with screen consisting of G.I. frame, aluminium louvers & G.I. wire mesh. 20 Balancing valves –100 mm diameter 21 Y strainer-100 mm diameter 22 Butterfly valves – 100 mm diameter 23 Providing stem type thermometers 24 SITC OF PRESSURE GAUGE 25 Supply installation of M.S. C class chilled water pipe line/drain line – 150 mm diameter 26 Supply installation of M.S. C class chilled water pipe line/drain line – 125 mm diameter 27 Supply installation of M.S. C class chilled water pipe line/drain line – 100 mm diameter 28 MS structure for AC works 29 Supply & fixing acoustic insulation in the Plant room/ AHU room 30 3 Ph input & 3 Ph output 40 kVA fully microprocessor based true online double conversion UPS system with SMF batteries suitable for 1/2 hrs along with necessary battery racks & interconnections & UPS to battery bank cables. 31 IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 8 Noss 6A/10A SP MCB as outgoing (12 way SPN DB) 32 IP 42 Wall/column Mounted distribution board with one Nos of 63A 4P MCB and 3 Noss 16A TP MCB / 9 Noss. 16A SP MCB as outgoing (4 way TPN DB) 33 IP 43 4 Way MCCB DB (125/160A MCCB + 4Way TP MCB /12 Way SP MCB) 34 1st category Al armoured cables FRLS outer sheathed- 3.5C x 300 Sq.mm 35 1st category Al armoured cables FRLS outer sheathed- 3.5C x 120 Sq.mm 36 1st category Al armoured cables FRLS outer sheathed- 3.5C x 70 Sq.mm 37 1st category Al armoured cables FRLS outer sheathed- 3.5C x 50 Sq.mm 38 1st category Al armoured cables FRLS outer sheathed- 3.5C x 35 Sq.mm 39 1st category Al r armoured cables FRLS outer sheathed- 4C x 16 Sq.mm 40 1st category Cu armoured cables FRLS outer sheathed- 4C x 16 Sq.mm 41 1st category Cu armoured cables FRLS outer sheathed- 3C x 10 Sq.mm 42 1st category Cu armoured cables FRLS outer sheathed- 3C x 6 Sq.mm 43 1st category Cu armoured cables FRLS outer sheathed- 3C x 4 Sq.mm 44 1st category Cu armoured cables FRLS outer sheathed- 3C x 2.5 Sq.mm 45 1st category Cu armoured cables FRLS outer sheathed- 4C x 1.5 Sq.mm 46 1st category Cu armoured cables FRLS outer sheathed- 4C x 6 Sq.mm 47 Cat 6 Gigabyte 48 Cable End Termination For Aluminium Cables – 3.5C x 300 Sq.mm 49 Cable End Termination For Aluminium Cables – 3.5C x 120 Sq.mm 50 Cable End Termination For Aluminium Cables – 3.5C x 70 Sq.mm 51 Cable End Termination For Aluminium Cables – 3.5C x 50 Sq.mm 52 Cable End Termination For Aluminium Cables – 3.5C x 35 Sq.mm 53 Cable End Termination For Aluminium Cables – 4C x 16 Sq.mm 54 Cable End Termination For Copper Cables – 3C x 16 Sq.mm 55 Cable End Termination For Copper Cables – 3C x 10 Sq.mm 56 Cable End Termination For Copper Cables – 3C x 6 Sq.mm 57 Cable End Termination For Copper Cables – 3C x 4 Sq.mm 58 Cable End Termination For Copper Cables – 3C x 2.5 Sq.mm 59 Cable End Termination For Copper Cables – 4C x 6 Sq.mm 60 Cable End Termination For Copper Cables – 3C x 25 Sq.mm 61 PVC box & cover plate with RJ-45 for LAN access only 62 PVC box & cover plate with RJ-11 for Telephone access only 63 50 pair M.S.Junction Box for EPABX 64 Switch BOX point for computers through PVC ConduitDescription of Item8Modular SURFACE BOX - 1 No.8Modular PLATE - 1 No.INDICATOR LAMP - 1 No.15A SWITCH - 1 No.6A 5 PIN SOCKET - 3 Nos.2Modular SURFACE BOX - 1 Nos.2M PLATE - 1Nos.RJ11 SOCKET - 1 Nos.RJ45 SOCKET - 1Nos. 65 G.I. Cable tray with all other accessories 75 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 66 G.I. Cable tray with all other accessories 100 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 67 G.I. Cable tray with all other accessories 150 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 68 G.I. Cable tray with all other accessories 300 x 50mm (W x H) - (16 SWG - 1.6mm) without cover 69 Earthing Continuity Conductors -25 x 3mm GI 70 Wiring for submains- medium class PVC- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25mm Conduit 71 Wiring for submains- medium class PVC- 2 X 6 sq. mm + 1 X 6 sq. mm earth wire in 25mm Conduit 72 Earthing station with 100mm Dia., 13mm thick, 3000 mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip / 2X8SWG G.I. wire up to chamber ( wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/Charcoal & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope 73 25 mm.- Only PVC Conduits 74 Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on Wall. 75 Supply, Installation, testing & commissioning of addressable 2 loop main fire alarm electronic control panel, expendable up to 4 loop & having maximum 250 devices (any combination detectors plus devices) per loop & Audio/ Visual alarm complete as per IS: 2189 specification - modular type front operated with interlocking door arrangement totally enclosed dust and vermin proof for indoor type applications. 76 Supply, Installation, testing & commissioning of remote response indicator 77 Supply, Installation, testing & commissioning of conventional optical type smoke detector complete on box as per Specification 78 Supply, Installation, testing & commissioning of conventional Heat detector complete on box as per specification 79 Supply, Installation, testing & commissioning of Programmable Electronic Sounders (Hooters): 80 Supply, Installation, testing & commissioning of Isolator Module along with mounting box & termination glands. 81 Supply, Installation, testing & commissioning of Addressable control Relay module with required accessories along with junction box, glands and terminators ( For AC trip off, Access trip off, PA system, sprinkler flow switch, lift interface, sounder, fire fighter & telephone jack) 82 Supply, Installation, testing & commissioning of Addressable Manual call point/ station with mounting back box 83 1st category Cu armoured cables FRLS outer sheathed-2C x 1.5 Sq.mm 84 6W/100V. PA Ceiling Speaker 85 Supply and installation of 250 watts amplifier with USB 86 Supply and installation of 16 channel zone selector 87 Supply & installation of 16 channel zone control panel/ Zone selector to control the output of the amplifier. 88 SITC of 9 inch Rack 89 Delegate unit Microphone 90 Supply, Installation, Testing & Commissioning of InfraRed Analog HD Dome camera, 1/3’’ CMOS image sensor, Fixed Lens: 3.6mm (2.8mm, 6mm & upto 12mm optional lens), Minimum 720 P lines horizontal resolution, IR Range upto 20m,1 channel BNC HDCVI high definition video output, Minimum Illumination: 0.05Lux/F2.0, 0Lux IR ON; Auto(ICR) / Color / B/W filter, Weatherproof Standard : IP67 and etc. to fullfill the requirement. 91 Design, Supply, testing, installation and commissioning of modular 16 channel 1080P NVR, Recording: 1920X1080P, 15 FPS, 30 days recording, 24 hours/day; Real time monitoring with 25 FPS. Hard disc : 8 SATA III Ports, Each 6TB , up to 48TB, 1 eSATA port, Disk array: Support RAID 0/1/5/6/10, Two no’s of RJ -45 10/100/1000 Mbps self adaptive Ethernet interface, RS 232, RS 485, keyboard interfaces, VGA/HDMI compatible, 2nos front USB 2.0 & 1 no at rear USB 2.0 compatible & 8 TB hard disc and as per storage configuration contractor shall consider the separate hard discs. 92 Supply & inst of 18.5 LED Monitor 93 SITC of 24 ports 10/100/1000 with 2 combo ports PoE switch 94 Supply & laying I.S.I. mark B class GI Pipe -25 mm dia. 95 Supply & laying I.S.I. mark B class GI Pipe -32 mm dia. 96 Supply & laying I.S.I. mark B class GI Pipe -38/40 mm dia. 97 Supply & laying I.S.I. mark B class GI Pipe -50 mm dia. 98 Supply & laying I.S.I. mark B class GI Pipe -65 mm dia. 99 Ball valves 25 mm diameter 100 Ball valves 40 mm diameter 101 Ball valves 50 mm diameter 102 Ball valves 65 mm diameter 103 SITC of Oxygen Digital Fully Automatic Control Panel of 2000lpm. Input power to the manifolds is 110 to 240 VAC, 50-60 Hz. It should have flow capacity 4,500 SCFH [2,000 L/min]. (Maximum tolearance allowed will be only 10%). 104 SITC of Medical Grade Copper Tube/Pipes including all type of accessories Like,Tee, Elbow, Valves, etc. complete_Copper Pipes of 15mm OD x 1.0mm thk 105 SITC of Medical Grade Copper Tube/Pipes including all type of accessories Like,Tee, Elbow, Valves, etc. complete_Copper Pipes of 22mm OD x 1.0mm thk 106 SITC of Medical Grade Copper Tube/Pipes including all type of accessories Like,Tee, Elbow, Valves, etc. complete_Copper Pipes of 28mm OD x 1.0mm thk 107 SITC of Medical Grade Copper Tube/Pipes including all type of accessories Like,Tee, Elbow, Valves, etc. complete_Copper Pipes of 42mm OD x 1.2mm thk 108 SITC of 15 mm Single Port Ball Valve with Pipe line assembly (pre piped) : Pre Piped Degreased Ball Valve with pipe extension. It should be full-port design.It should be blow-out proof stem. It should be lockable valve. 109 SITC of 22mm Single Port Ball Valve with Pipe line assembly (pre piped) : Pre Piped Degreased Ball Valve with pipe extension. It should be full-port design.It should be blow-out proof stem. It should be lockable valve. 110 SITC of 28mm Single Port Ball Valve with Pipe line assembly (pre piped) : Pre Piped Degreased Ball Valve with pipe extension. It should be full-port design.It should be blow-out proof stem. It should be lockable valve. 111 SITC of Digital Area Alarm (5 Services : Oxygen,N2O, MA4 Air, SA7 Air and Vacuum) with pressure sensor : Medical Gas LCD Alarm : It should be UL or ETL Listed. The LCD alarm shall be microprocessor based with a 10 (25.4 cm) screen and capable of monitoring medical gases. 112 SITC of Vacuum Filter (Bacteria Filter) of 50scfm to 60scfm – 3” Filter housing with drain flask: The bacteria filter should be designed for critical application involving removal of dry and wet dust, particulars, oil aerosol and water droplets, high efficiency glass fiber, fieece media from suction side of vacuum pump system. It should have efficiency of at least 99.995% . 113 SITC of Gas pressure Regulator of size 25mm 114 SITC of Oil Free Rotary Screw/Scroll Air Compressor : Oil free Rotary Screw/scroll air compressor.It should be 50Hz, 3 Phase, 440volts. 11 Bar, 116 Psig. 99cfm or more at 11 Bar. 22 Kw & 30 Hp. The 99 cfm flow capacity for each compressor unit having suitable motor rating of Rotary Screw/scroll air cooled compressor. Compressors shall be oil free Rotary Screw/scroll compressors suitable for both continuous and frequent start/stop operation at a nominal outlet pressure of 800 kPa (8 bar). The air quality shall be 100% oil free, certified ISO8573-1. The compressor shall have a sound insulating enclosure. 115 SITC of Vacuum Pump. : It should be oil lubricated rotary vane vacuum pump, having each vacuum pump capacity of 1500lpm with IEC Motor rating of minimum 7.5 HP @ 50 Hz or above. Vacuum pump shall comprise of air cooled, oil lubricated vacuum pumps suitable for both continuous and frequent start / stop operation at inlet vacuum vessels between 525mm Hg and 700 mm Hg. The ultimate vacuum of pump shall be 0.1 mbar with gas ballast valve closed. 116 SITC of Vacuum Receiver Tank of 500 Litres water capacity. 117 SITC of Humidifier Bottle : Polypropleyene or Polysulphone 250cc Humidifier bottle should be unbreakable, reusable to disinfectants and complements. 118 SITC of Vacuum Regulator Unit : It shall be duly CE marked/UL listed or equivalent. 119 SITC of High Flow Oxygen Flow Meter 0- 70lpm : It shall be duly CE marked/UL listed or equivalent. The flow meters should be of 0-70 LPM range for oxygen and with inlet pressure 50-60psi. (4.5 bar). 120 Providing, Fixing, Testing & Commissioning of 3 way mixing valve - 100 mm diameter 121 SITC OF Medical Gas Pipeline inside OT Comprising of Cooper pipe 15mm Diameter 0.7 and 22mm Diameter 0.9, Pressure transducers , NIST Connectors etc. 122 SITC OF Storage Unit having two shelves and made out ofStainless steel of grade SS304, having 5 mm thick glass door and mounted flush with the theatre wall and anti microbial coated 123 Supplying &Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4. a) 80 mm (3) dia 124 Supplying &Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4. b) 100 mm (4) dia. 125 Demolishing brick work in lime or cement mortar including plaster, paint, etc. manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 126 Dismantling doors, windows, fanlight and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 127 Cement mortar 1:3 (1 cement : 3 coarse sand) 128 Providing and applying 6 mm thick internal sand faced ceiling plaster in cement mortar 1:3 at all heights and locations in single coat for concrete surfaces including scaffolding, hacking of concrete surface, watering,finishing, curing etc. complete. 129 For plastered wall surface 130 SITC of fire-rated 50mm thick double skin wall panels made with 0.8mm thick plain GI (without powder coating) sheet on both sides with rockwool. 131 SITC of fire-rated 100mm thick double skin wall panels made with 0.8mm thick plain GI (without powder coating) sheet on both sides with rockwool. 132 SITC of fire-rated 50mm thick double skin walkable ceiling panels made with 0.8mm thk plain GI (without powder coating) sheet on both sides with rockwool. 133 SITC of aluminium coving 134 SITC of aluminium 3D corner 135 Providing floor coving 136 SITC of fireproof double door with frame 1500x2100 mm 137 SITC of fireproof double door with frame 900x2100 mm 138 SITC of windows double glazed 139 SITC of view panel double glazed 140 SITC of Rail for chemically treated stain retardant fabric. 141 SITC of chemically treated stain retardant fabric. 142 SITC of Nurse Calling System 143 SITC of fully motorized bed with mattress 144 SITC of double decker AHU, SA-7000 cfm, 125mm static & EX - 7000 cfm, 80mm static - OT 1& 2. 145 SITC of double decker AHU, SA-7500 cfm, 125mm static & EX - 8500 cfm, 80mm static - pre & post op, corridors & change room. 146 SITC of double decker AHU, SA-10500 cfm, 125mm static & ex - 10500 cfm, 80mm static - OT 1,2 & 3. 147 SITC of aluminium insulated powder coated terminal boxes with filter holding arrangement to hold the filters of H14 filters of size 600x600. 148 SITC of AHU panel-1 with VFD, AHU 01 - SA - 11 KW, EX - 7.5 KW. 149 SITC of AHU panel-2 AHU 02 - SA - 11 KW, EX - 7.5 KW. 150 SITC of AHU panel-3 AHU 03 - SA - 15 KW, EX - 11 KW. 151 SITC of fusible link fire damper 152 SITC of Main Power Panel 153 SITC of UPS Panel 154 SITC of modular type switch socket 16 amp switch 1 nos. with front & rear plate. 155 SITC of modular type switch socket 16 amp switch 2 nos. with front & rear plate. 156 SITC of 16 amp switch 3 nos. with front & rear plate. 157 SITC of 16 amp switch 4 nos. with front & rear plate. 158 SITC of 16 amp switch 6 nos. with front& rear plate. 159 SITC of 6/16 amp switch socket 1 no. with front & rear plate. 160 SITC of 6/16 amp switch socket 2 no. with front & rear plate. 161 SITC of Electrohydraulic Operation Table 162 SITC of SS304 OT trolley with required wheels 163 SITC of saline stand of SS304 164 SITC of SS304 tables 165 SITC of SS304 standard chairs 166 SITC of Magnehelic Gauge 167 SITC of SS304 overhead storage 168 SITC of Signages 169 Validation & documentation charges 170 SITC of Powder Coated Emergency Recovery Trolley 171 CSMC Charges for 3 years after 1 year DLP
Contract Date: Dec 24, 2025 Contract Value : ₹ 19.47 Crore
Local Bodies No of Bidders 3
Maharashtra View Result →
32.
Agriculture #8370827 AOC
E-Tender (2Nd Call) For Procurement Of Laboratory Instruments, Equipment, Appliances For The College Of Veterinary Sciences And Ah, Rk Nagar Under The Nec Funded Project For The Year 2025-2026 , Biosafety Cabinetclassii, A 2 With Accessories And Power Back Up (Bacteriology)--• The Biological Safety Cabinet Should Be Of Class Ii, Type A2 Designed In Compliance With International Standards • The Biological Safety Cabinet Quoted Instrument Model Must Have International Standards Test Likensf, Tuv Nord, En 12469 Certification. Certificate Copy Must Be Provided Along With The Technical Bid. • Working Area Should Be Around 4Foot. It Should Have Exterior Dimension W X H X D Of 1300X 1568 X 800 And Interior Dimension Wxhxdof 1200X 780X 630 • It Should Have 1 Piece Grade 304 Stainless Steel Or Thermos Scientific Smart Coat Interior • Itshouldhavefeatureforpersonalprotection,Sample Protection, Cross Contamination Protection And Environmental Protection. • It Must Utilize Brushless Dc Motor Technology Which Uses Significantly Less Energy With Less Heat Emission Provision Compared To Traditional Ac Motor Technology To Ensure Lower Levels Of Energy Consumption. • It Should Have 10° Sloped Front For Exceptional Comfort And Ergonomics • Thesystemshouldbedesignedwithdualmotor. • The Motor Must Automatically Adjust Or Control Fan Speed In Real Time To Maintain Constant Airflow During Filter Loading Or Temporary Obstruction. • Air Flow Direction: Vertical Laminar Flow & Air Intake Across Front Opening And 70% Recirculation. • Filter: High Performance Particle Air Filter H14(Hepa En1822), Filtering Efficiency 99.995% Mpps Or Better. • Energy Saving Mode When Cabinet Not In Use With Maintaining Sterility. Continuous Airflow Helps To Maintaina Sterile Environment, Evenwhen The Cabinet Is Not In Use. • Thesystemshouldhaveindependentsensorstodetect Pressure Changes Across The Exhaust And Down Flow Plenum/ Air Velocity And Should Indicate Alarm Signal When A 20-30% Change In Inflow/ Exhaust Or Down Flow Occurs. • Control Panel And Performance Monitor Displays Inflow/ Down Flow Velocities, Hours Of Use Etc. To Verify Proper Cabinet Operation. • Frontglasswindowshouldbeeasilyloweredforthorough Smart Cleaning Of Inner Surfaces And Designed To Protect Users By Maintaining Inflow, Even When The Window Is Lowered. • The Uv Light Must Be Quoted Which Should Be Programmable From 30 Min To 24 Hrs. In Minimum 30 Minutes Increment To Shut Off Automatically. The Settings Must Allow The User To Program The Timer. • The Cabinet Noise Level Must Be Less Than 63 Db(A) As Measured In A Sound Proof Room To • Promote More Comfortable And Safer Working Habitsof The User A Per Nsf/ Ansi 49. • The Controller Must Be Located On A Slanted Frontpanel So It Is Easy To See From A Seated Working Position In Front Of The Cabinet. • Control Panel Should Be A Large Digital Color Touch Screen Display With Health Monitoring System, Valuable Safety And Performance Data With Constant Read-Out Of Downflow/ Inflow Velocities And Hours Of Operation In Real-Time, Number Of Hours Of Use On The Hepa Filters. • The Front Window Sash Must Be Angled 10° Sloped Front For Operator Comfort. • Two Pieces Of Removable And Autoclavable Stainless Steel Arm Rest Should Be Provided For Operator’S Comfort Without Disturbing The Air Flow. • The System Must Have Audio Visual Alarms To Indicate When Inflow Is Restricted And As Well As Whether Front Window Is In Correct Position Or Not. • Theworkareashouldbeilluminatedwithswitchable Fluorescent Lamp Of Lighting Power >120 Fc Or Higher. • Suitable Height Floor Stand Without Casters Should Be Provided. • In Built Access Ports, 2 Nos. (1 On Each Side) Shouldbe Available. • It Has Single Piece Stainless Steel Work Tray For Easy Cleaning And Decontamination. • Warranty:Minimum3year. • Electrical Supply Available: 230V A.C, Single Phase, 50 Hz. • Bidder Should Provide Printed Brochure Of The Quoted Model And Details Specification Should Be Available In The Manufacture Website. • Customized Model Would Not Be Accepted Withoutany Quality Control Certificate Or 3Rd Party Approved Certification • Prompt & Efficient After Sales Service Should Be Available In The Eastern Region Of India. • User List: Minimum 10 Numbers Of Quoted Model Should Have Been Installed In Government • Institution(Listshouldbeenclosed). • Quotedwith2kvaservovoltagestabilizer. • Three(2)Yearswarranty. • 3Kva Stabilizer , Autoclave--• Capacity: 60L To 80 L, Vertical, Watt:3-4Kw, Operation Mode: Fully Automatic (Digital Controller With Automatic Pressure Release Valve), Construction: Double Walled Inner Chamberstainless Steel 304, External Chamber: Stainless Steel 304 Lid Stainless Steel 304, • Ring & Stand: Stainless Steel 304 Heater Immersion Heater, Gasket: High Temperature Silicone Rubber Gasket (Joint Less), Locking System Radial Locking Mechanism W/ Pedal Lifting Device/ Butterfly Nut Lid Lock. • Temperature Range: 121°C To 125°C Temperature Accuracy ±1°C • Temperaturesensor:Pt100 • Controller: • Digitaltemperaturecontroller • In-Builtdigitaltimer0-60Minutes • Endofsterilizationbuzzeralert • Digitaldisplayofpressure • Sensorbrokenindication • Pressure:15To20psior Above. • Steam Release: Automatic Steam Release After Sterilization • Releasevalve:Solenoidvalve • Pressuredisplay:Dialtypepressuregauge • Safety • Overpressuresafety Valve • Automaticvacuumbreaker • Lowwaterlevelcut-Off Sensor • Basket:Wiremeshbasket • Powersupply:220Volts50hz • Waterinletvalve • Directlypourintothe Chamber • Standardaccessories: • Waterlevelindicator(Glass) • Waterdrainvalve • Warranty:3Years(On-Site) , Bod Incubator-- • Capacity:200L • Temperaturerange:Ambient+5°Cto+60°C • Chamber:Stainlesssteel • Temperatureaccuracy:±0.5°C • No.Ofshelves:3-6 • Temperaturesensor:Pt-100 • Shelves:Perforatedstainlesssteel • Dimension:Lxwxh(Cm)-80X80x180 • Numberofdoors:1-2 • Loadperrack(Kg): 25-60 • Lighting:Interiorilluminationwithledlight. • Insidedoor:Transparentacrylic • Outsidedoor:Well Insulated • Power:Workson230vacsinglephase50hz • Displaydigitaldisplay • Warranty:3Years(On-Site) , Video Endoscopy Machine-- • Should Be Veterinary Specific & Suitable For Companion Animal As Well As Large Animal. • Gastroscopeshouldhaveintegratedvideocamera With High Source. • Shouldalsohavemedical Colonoscope. • Insertion Tube Should Be Of Extremely Short Tip With Outer Diameter Of 8.4 Mm, Working Length Should1050 Mm, Working Channel Should Be 2.8 Mm. • Should Have 4- Way Deflection (Upward 210°, Downward 90°, Left 100° And Right 100°). • Fieldofviewshouldbe120°. • Depthofviewshouldbe3-100Mm. • Should Be Provided Along With Carrying Case, Caps For Working Channel, Irrigation Tube, Cleaningbrush And Cleaning Valve. • Shouldhavebiopsyforcepsandforeignbody Forceps. • Hd Camera System Should Be Compatible With Both Flexible And Rigid Endoscope. • Should Have Internal Medical Grade Recorder For Capturing Full Hd. • Patients Informationshouldbe Editable Anddisplayed In Monitor. • Shouldbesuppliedwithmedicalgrademonitor. • Shouldbesuppliedwithtrolley. • Patients Informationshouldbe Editable Anddisplayed In Monitor. • Shouldbesuppliedwithmedicalgrademonitor. • Shouldbesuppliedwithtrolley. • Shouldprovide3-Yearwarrantyandshouldhave Oemserviceengineerpostedattripuraforregular Promptservice(Documentstobe Enclosed) , Elisareader Withaccessories Including (Absorbance Microplate Readers, Software And A Fully-Automated Elisa Processor And Powerbackup.)-- • Filter Based Elisareader With Halogen Lamp As Light Source And Single Channel Optics/ Single Detector With Silicon Photo Detectors For Reliable Results. • Halogenlampshouldhaveminimumusageoption, I.E. It’S Should Get ‘On’ While Reading And Should Be ‘Off’Mode Even The Instrument Is On Standby Mode. • Should Be Compatible To Wavelength Range From 340 To 850 Nm, Which Must For Various Elisa Applications. • Shouldhaveeasyaccess8positionfilterwheel. • Instrument Should Be Supplied With 3 Standard Filters Of 405Nm, 450Nm And 620Nm. • Should Have Automatic Calibration And Selfdiagnostics Of Any Possible Error In Optical Alignment Before Each Program Reading. • Should Able To Read 96 Well Format Microwell Plate In 6 Seconds. • The Instrument Should Run In Stand-Alone Mode Orwithcomputer&Dataanalysissoftware Controlled. • Internal Software (Standalone Mode) Should Have All The Basic Application Related To Elisa Like Quality Control, Qualitative Classification, Standard Graph Etc. • Computer Software Should Be Supplied With Unlimited User Licenses And Should Have Reading As Well As Data Analysis Option Including Standardcurve Fit, Qualitative Classifications, Quality Controletc. • Systemshouldabletoruninstand-Alonemodeusing 4.5-Inchcolourdisplayand Keypad. • The Instrument Should Have A Memory Of 99 Inbuilt Protocolsinstand-Alonemodeand100resultmemory. • The Instrument Should Have 2 Usb Ports, One For The Easy Data Transfer And Another To Connect Printer Directly To The Unit. • System Should Have Usb Port For External Printer Connectivity Option For The Data Printout. • Instrument Should Be Either Ce Mark/ Ivd/ Usfda, Authorized Certificate From Notified Body Should Be Submitted. • One(1)Year Warranty O 3Kvaonlineups O Attached With Suitable Computer Desktop With Powerbackupwithfollowingconfigurationintel I3processor12th Gen, 8Gb Ram, Ssd, Ddr-4, Hard Disk 1 Tb, 15 Monitor, Keyboard, Mouse With Computer Ups Dataanalysissoftware: O Software Should Have Option For Area Selection. I. E Differentprotocolsatdifferentareaofthesameplate. O Database Based Software To Run Backups Of All Data, Restore Back Up Data (In Case Of Hardware Failure Of Original Computer). O Singlesoftwareprogramshouldallowanynumberof Measurement Steps Within The Program. O Datashouldbeabletoexportinformatssuchas Excel,Pdf,Xml,Ornote. , Incubator (Bacteriological)-- • Controller: Microprocessor Pid Digital Controller For Temperature Control • Timer:99Hr59minorcontinuousselectable • Innermaterial:Stainlesssteel304 • Outer Material: Mild Steel With Antibacterial Powder Coated Paint • Door:Glasswindowviewingmetaldoublewalled Door • Insulation: Double Wall Construction & Mineral Wool Insulation To Avoid Heat Loss • Innerdimensions:455X455x610mm(Wxdxh) • Capacity:6Cu.Ft(Table-Topmodel) • Temperaturerange:Ambient+5°Cto100°C • Temperature Accuracy:±1°Ccontrolledwithpt-100 Sensor • Temperatureuniformity:±1°C • Heaterload:600Wheaterresistancenichromewire • Aircirculationfan:Maintainuniformtemperature • Display:Leddigitaldisplay • Shelves (Removable): Ss 304 Made 03Nos. Wire Mesh Shelves • Safety:Over/Undertemperaturealarm&Cut-Off, Over Current Breaker • Electricsupply:220V,50Hz;With3-Pinsafetyplug And Power Cord • Warranty:3Yrs , Micro Haematocrit Centrifuge-- • Motorcapacity:24X75mmlengthcapillarytubes. • Speedrangeof500-12,000Rpm,Max.Rcf12000/ 14118G. • Independentcontrolofspeedandtime. • Easyoperationwithintuitivemenuanddigitaldisplay. • Max.Speedof 12,000Rpm. • Rotor:Hctrotorwithscrewonlid. • Weight:4-8Kg • Warranty:2Years(On-Site) , Micropipetteset--• Kitshouldinclude0.2-2,2-20,20-200&100-1000Ul Single Channel Pipettes, 1Pipette Stand (6 Position), 4 Sizes Tip Boxes With Tips, Reagent Reservoir Sample, Calibration Certificate. • Alsoincludedextratwopipettes1-10Ul,10-100Ul. • Fullyautoclavable • Advancedvolumegearingmechanism • Shouldhavelarge,Easy-To-Readdisplay • Double-Action Pipetting Button With A Rotating Upper Part, For Easy And Light Volume Setting. • Shouldbelightweight,Leastrsi(Repetitivestrain Injury) • Ergonomicdesign,Separatesofttouchtipejector • Inlabcalibrationandeasymaintenance,Easytoopen • Superblowoutpistonforsmallvolumestoensure Delivery Of Micro Size Drops • Shouldbeisoandusfdacertified(Provide Document) • 2Years Warranty , Desktop Computer-- • Operatingsystem:Windows11pro(Original) • Processor:Intel®Core™I5-13500 (Upto3.8Ghz With25mbcacheand6 Cores) • Memory:8Gbddr4-3200Mhzram • Storage:1Tbhdd+512Gbssd • Graphics:Intel®Uhdgraphics770 • Chipset:Intel® • Connectivityandcommunications:Intel®Wi-Fi6e And Bluetooth® 5.3 Wireless Card • Ports: 1 Headphone/ Microphone Combo; 1 Usb Type- C 10Gbps Signalling Rate; 3 Usb Type-A • 10Gbpssignallingrate • Videoconnectors:1-Hdmi1.4;1-Displayport1.4; 1- Vga • Monitor:Size-60.5Cm,Fhd(1080P)Withips Display • Pointingdevice:Wiredmouse • Keyboard:Wired • Should Include Original Preinstalled Latest Version Microsoft Office Home, & Student 2021 Lifetime Subscription • Ups:1,000Va,360W,Withleast15-Minuteback-Up • Warranty:03Years(On-Site). , Scalding Tank (Stainlesssteel)-- • Material: Stainless Steel: 304Ssgrade- Cylindricalshapedwith Legs-Drum1.2 Mm Thickness With Lid. • Drumcapacity–50–60Litres • Capacity–2-3Birds • Electricalheater–2Kwcapacity • Power:230-240V/50Hz. • Controlpanelwithdigitaltemperatureindicators.Type: Electrically Operated , Clinical Haematologyanalyser(Five Part)--• Fullyautomatic Veterinary Hematologyanalyzer For Analysis Of Different Species Of Domestic, Pet Animals, Lab Animals And Wild Animals’ Blood. • Flow Cytometry (Fcm), Tri-Angle Laser Scatter, Chemical Dye Method And Independent Basophilchannel Etc./ And Other Advance Method • 5 Parts For Different Wbc Count With Veterinary Animal Species Specific Software • Minimum23parameters:Wbc,Lym%,Mon%,Neu %, Eos%, Bas%, Lym#, Mon#, Neu#, Eos#, Bas#, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct. • 3Histogramforrbc,Wbc&Plt • 3Scattergramsforwbcdifferential • Samplevolume<20?L,Tfttouchscreendisplay • Canprocess Upto60samplesperhour • Storageupto30,000Samplereport. • Keyboard,Externalinkjetprinter,Supportedbyuser- Defined Report Format Print Out (A4 Size) • Fullsetconsumablereagentsuppliedalongwith Instrument. • Onlineups1kva,360Wwith15-30Minbackup • Shouldprovide3yearswarrantyandshouldhaveoem Serviceengineerpostedattripuraforregularand Prompt Service (Documents To Be Submitted Along With Enit) , Electric Stunner--• Stunner With Ss Tongs To Operate On Sheep/ Goats And Pigs. • Thecontrolboxwithanaloguedisplayfor0–110 Voltsand2ampere. • Withdigitaltimer. • Stunnerwithcontrolbox. , Portablecolouranalyser-- • Digitalcolourmeterthatmeasurescolourinlab • Colourspace:Cielab • Colourdifferenceformula:?E*Ab • Measurementcaliber:F8mm • Lightsource:D65 • Sensor:Photodiodearray • Observer:Cie10°Standardobserver • Measurementrange:L:0To100 • Repeatedaccuracy:?E<0.1 • Tabledifference:?E<0.2 • Measurementinterval:1Sec. • Storage Capacity: Type Sample Data: 100 Groups With Testing Sample Data: 100 Groups • Lifetimeofbulb:Minimum5years. • Displayscreen:Tfttruecolour 2.8Inch@(16:9) • Language:English , Mufflefurnace--• Temperaturerangesupto1000oc,Workingtemperature Upto950oc,Size19x16x18(L X W X H)Inches, 220/ 230-Volt, Warranty: 02 Year (On-Site) , Mixer Grinder--• No Of Jars: 3; Jar Size: Wet Jar (1.5 Litres), Multipurposejar(1Litre),Chutneyjar(0.3Litres);Jar Material: Stainless Steel; Body Material: Abs; Blade Material: Stainless Steel; Speed Control: 3 Speed Control+Pulse,Wattage:1000W;Voltage:230V, Warranty:01Year(On-Site) , Labwilly Mill--• Bodymaterial.Ms,Powersource.Electric,Voltage- 240V,Frequency-50Hz,Powerconsumption-0.75 Kw,Load.43Kg. , Digital Camera--• 24.1-Megapixelaps-Ccmossensor&Digic4+ Image Processor • 9-Pointafwith1centrecross-Typeafpointand Standard Iso 100 - 6400 (Expandable To 12 800) • Displaysize:3Inch • Lenstype:Opticalzoom • Digitalcameralensef-S18-55Mmf/3.5-5.6Isii , Exhibition Panel/Panel Board With Stand--• Size:10X4feet • Usage/Applicationexhibition • Size10x4feet • Framematerialaluminum • Mountingfreestanding • Shaperectangular • Thickness2.5-10Mm , Rms Speakers-- • 100Watts,Sta-150,Withtripodstandofheight Adjustment: 3.5Ft-6.5 Ft, • Loadcapacity;40Kg, • Warranty:1Years , Wireless Microphone-- Audiooutput:0110Mv/600,Freq.Resp:50-15000Hz, Antenna: Detachable Through Bnc Connector, Power: Ac-220-240Foracadopter,Modulationmade: Fm(F3e), Warranty: 1 Years. , Amplifier-- Ac&24Vdcoperated,250Watts,6Mic&2Aux, Warranty: 1 Year. , Publicaddress With Speaker--Pasystemwithabuilt-Inamplifier,Bluetooth,Usb, Recording,Andecho.Elegant,Rugged&Easytocarry Amplifier Which Delivers 20W (Max.) Output Power. Built-Indigitalmp3playerwithrecordingandbluetooth Function. Built-In Digital Echo. , Interactive Board--Size-75With4kultrahighdefinition(3840X2160) @ 60Hz With Oled Display Technology With 8 Ms Response Time, 20 Points Ir Multi Touch Interface, 3 Hdmi, 4 Usb, Bare Dimension Of 1990 X 114 X 1201 Mm With <320W Power Consumption, Build In Android 8.0 With < 3 Gb Ram And < 32 Gb Rom With Ops
Contract Date: Dec 03, 2025 Contract Value : ₹ 76.81 Lakh
Government Departments No of Bidders 14
Tripura View Result →
33.
Educational and Research Institute #8205038 AOC
Purchase Of Books For The College Central Library Tender For The Purchase Of Books For The College Central Library , Library Books (Refer Nit) , 9781009590921 Pauline Cullen 5G Mobile And Wireless Communication Technology , 9789382127581 Pramod Borole 8085 Microprocessor , 9789354661402 Kani 8085 Microprocessor And Applications 4Ed , 9781032791470 Ziemann Volker A Handson Course In Sensors Using The Arduino And Raspberry Pi , 9788121927833 Sedha A Text Book Of Applied Electronics , Bks658165 Theraja A Textbook Of Electrical Technology , 9788178001425 Bhasker A Verilog Hdl Primer 3Ed , 9788178000145 Bhasker A Vhdl Systhesis Primer 2/Ed , 9789356066137 Athawale Ad Hoc And Wilreless Sensor Network , 9788131706886 Murthy Ad Hoc Wireless Networks: Architectures & Protocols , 9789389396294 Nagoorkani Advanced Control Theory 3Ed , 9789332584464 Michael.D.Ciletti Advanced Digital Design With The Verilog , 9788126541249 Shaila Advanced Digital Signal Processing , 9789332549685 Tomasi Advanced Electronic Communications Systems , 9781259006135 Bhurchandi Advanced Microprocessors & Peripherals , 9789357460637 Raja Rao Advanced Mobile Wireless Communications : A Holistic Coverage From Basic Concepts To 5G Technologies With Iot , Bks480965 Kakani Advances In Optics , 9783540644866 Meinel Algorithm And Data Structures For Vlsi Design , 9789353502355 Roth Analog And Digital Electronics , 9789389354201 Lakshmaiah D Analog And Pulse Circuits , 9788126541980 Alok Barua Analog Signal Processing Analysis And Sysnthesis , 9789389583465 Narashiman Analysis Of Linear Control System , 9789355735164 Joshi Antenna And Wave Propagation , 9789354248474 Balanis Antenna Theory And Applications 4Ed , 9789355428820 Twomey Applied Embedded Electronics , 9788181476463 Sloss Armsystemdevelopersguide Designningand Optimizing System Software , 9781259029981 Khemani Artificial Intelligence , 9788126519934 Lavika Goel Artificial Intelligence: Concepts And Applications , 9789356063570 Russell Artificial Intelligence-4 Ed , 9781259006463 Bhargava Basic Elec & Linear Circuits , 9789389811247 Kothari Basic Electrical And Electronics Engg 2/Ed , 9781316632932 Saha Basic Electronics , 9788121925556 Theraja Basic Electronics Solid State , 9789352606467 Kothari Basic Electronics-2Ed , 9781032851181 Panigrahi Brain Computer Interface Eeg Signal Processing , 9780367267667 Nandini Building Wireless Sensor Networks , 9789353948184 Salivahanan Circuit Theory Analsis And Synthesis , 9789354662447 Kani Circuit Theory , 9789339219604 Sudhakar Circuits And Networks , 9789332542884 Weste Harris Cmos Vlsi Design 4E , 9781032851198 Raj Raman Cognitive Internet Of Things Enabling Tech Platforms , 9781259004605 Singh Communication Systems : Analog And Digital, 3Rd , 9789354640896 Haykin Communication Systems 5Ed , 9788131717592 Bali Consumer Electronics , 9788126522880 Ramachandran Control Engineering , 9780071333269 Gopal Control System , 9788123923888 Krishnamurthy Control System( Pb) , 9789389239010 Nagoor Kani Control Systems , 9789353505455 Rashid Control Systems : Analysis And Design , 9789389261868 Nagoor Kani Control Systems Engineering , 9789389185485 Kani A N Control Systems For Be/Btech Courses 5Ed , 9789355420787 Parsian Data Algorithms With Spark Recipes And Design For Scaling Up Using Pyspark , 9788178000756 Housley Data Communication And Teleprocessing System , 9789387067844 Razavi Design Of Analog Cmos Integrated Circuit-2Ed , 9789354661099 Kani Design Of Electrical Apparatus For Anna University , 9788126512331 Sam Shamugam Digital And Analog Communication System , 9780199488681 Salivahanan Digital Circuits And Design , Bks478677 Mutagi Digital Communication , 9789387511583 Nishanth Nazimudeen Digital Communication , 9789354242465 Haykin Digital Communication System , 9788131518359 George Kurian Digital Control Systems , 9780849311918 Farhat Digital Design & Computer Organization , 9789353062019 Mano Digital Design 6Ed , 9788131520710 Bignell Digital Electronics , 9789354642531 Guntha Digital First : The Six Realizations To Transform Your Business , 9789389811926 Jayaraman Digital Image Processing , 9789353062989 Gonzalez Digital Image Processing , Bks643706 Sridhar Digital Image Processing 2Ed , 9789332542525 Mano Digital Logic & Computer Design , 9789354669606 Nagoor Kani Digital Logic Circuits With Vhdl And Verilog Programs , Bks645741 Suman Digital Principles And System Design , 9780070636330 Antoniou Digital Signal Processing , 9789383635719 Reddy Digital Signal Processing , Bks642977 Rawat Digital Signal Processing , 9789332550339 Oppenheim Digital Signal Processing , 9788122436099 Kumar Digital Signal Processing , 9788131710005 Proakis Digital Signal Processing 4Ed , Bks595664 Ramesh Babu Digital Signal Processing 7Ed , 9788195268726 Senthil Kumar Digital Signal Processing And Its Applications , 9789354661006 Kani Digital Signal Processing For Anna University , 9789386668110 Ingle-Proakis Digital Signal Processing Using Matlab , 9789353167424 Salivahanan Digital Signal Processing, 4Ed , 9789356062054 Tocci Digital Systems 12Th Ed , 9789354666353 Nagoor Kani Digital Systems Design , 9788131518304 Roth Digital Systems Design Using Vhdl W/ , 9789354667688 Nagoor Kani Digital Systems Design With Access Code , 9788122436631 Kumar Digital Technology : Prin & Prac 2Ed , 9781032934198 Ranjan Ganguli Digital Twin , 9788190935630 Ashenden Digitaldesign An Embedded System Approach Using Verilog , 9789354661242 Kani Discrete Time Signal Processing For Anna University , 9781032938608 Kersting Distribution System Modeling And Analysis With Matlab And Windmila 5/E , 9781032937939 Milovanovic Driving 5G Mobile Communications With Artificial Intelligence Towards 6G , 9789388005210 Vijayalakshmi Electric Circuits Theory And Analysis , Bks643022 Rajput Electrical And Electronic Measurements And Instrumentation , 9789381075722 Bhargava Electrical Measuring Instruments And Measurement , 9788131701713 Raju Electromagnetic Field Theory & Transmission Lines , 9780521670425 Guru Electromagnetic Field Theory Fundamentals , 9788173719776 Mallikarjuna Reddy Electromagnetic Waves Transmission Lines , 9781420064476 Rothwell Electromagnetics 2/Ed , Bks662300 Awad Electronic Commerce : From Vision Tofulfillment , 9789355322067 Salivahanan Electronic Devices And Circuits , Bks411785 Bell David Electronic Devices And Circuits 5Ed , 9789332542600 Boylestad Nashelsky Electronic Devices And Circuits--11 Ed , 9789353162511 Kalsi Electronic Instrumentation And Measurement , 9789355422064 Farmer Embedded Analytics , 9789357463966 Peckol Embedded System 2Nd Ed , 9788131512241 Huang Embedded System Design Using C8051 , 9789353168025 Raj Kamal Embedded Systems 4Ed , 9788131533208 Ganesh Rao Engineering Electromagnatics , 9789353169725 Hayt Engineering Electromagnetics 9Ed , 9789357461245 Agrawal Fiber Optic Communication Systems 5Ed , 9789813346673 Keiser Fiber Optic Communications , 9788126515929 Steven O Hanlon Fintech For Dummies , 9788131200896 Agarwal Foundation Of Analogand Digital Electronic Cricuits , 9788177583922 Kalakota Frontiers Of Electronic Commerce , 9788131705735 Proakis Fundamentals Of Communication Systems , Bks660465 Anand Kumar Fundamentals Of Digital Circuits 4Ed , 9788131515457 Rajendra Prasad Fundamentals Of Electronic Engineering , 9781032728438 Kumar S. Fundamentals Of Internet Of Things , 9789353502645 Roth Fundamentals Of Logic Design , 9789360535650 Roth Fundamentals Of Logic Design , 9789389811223 Naidu High Voltage Engineering , 9789355324320 Arun Sharma How To Prepare For Data Interpretation For Cat 8Th Ed , 9789355325112 Arun Sharma How To Prepare For Logical Reasining For Cat 7Th Ed , 9788126509096 Muralidhar Kulkarni, K S Shivaprakasha Information Theoryand Coding,As Per Aicte , 9789385880520 Reddy Instrumentation & Control Systems , 9781032599144 Fadi Internet Of Nanothings And Wireless Body Area Networks , 9789388991018 Shriram Vasudevan Internet Of Things 2Ed , 9788173719547 Vijay Madisetti Internet Of Things: A Hands On Approach , 9789390727384 Raj Kamal Internet Of Things-2Ed , 9781032728100 Roy M. Interoperability In Iot For Smart Systems , 9789339219680 Shibu Intro To Embedded Systems--2Ed , 9788131703069 Charniak Introduction To Artificial Intellegence , 9789351073192 Grami Introduction To Digital Communication 1St Ed , 9781316644010 Ghatak Ajoy Introduction To Fiber Optics , 9789381075920 Braun Introduction To Instrumental Analysis 2/Ed , 9781009200813 Sneh Saurabh Introduction To Vlsi Design Flow , 9788131516706 Agarwal Introduction To Wireless And Mobile , 9789353160487 Salivahanan Linear Integrated Circuits , 9788126518968 Nair Linear Integrated Circuitsanalysis Design & Applications , 9789354643606 Motwani Machine Learing For Text And Image Data Analysis , 9789355429292 White Making Embedded Systems 2Ed , 9780849371899 Sanchezjulio Microcontroller Programming: The Microchip Pic , 9788126548354 Rafiquzzaman Microcontroller Theory And Application With The Pic , 9789354601637 Neamen Microelectronics , 9789332577497 Rafiquzzaman Microprocessors : Theory And Application , 9789354660924 Kani Microprocessors And Microcontrollers 3Ed , 9788177583533 Liao Microwave Devices & Circuits 3Ed , 9789390113347 Das Microwave Engineering 4Ed , 9789351070306 Clerck Mimo Wireless Networks 2Ed , 9788126534869 Andrzej Mixed Signal Systems A Guide To Cmos Circuit , 9780070635999 Lee Mobile Cellular Telecomm 2E , 9788131724262 Schiller Mobile Communications, 2Ed , 9788131731666 Garg Mobile Computing , 9788131518854 Proakis Modern Communication System Using M , 9789360748128 Gopal Modern Control System Theory 5Ed , 9789355321770 Jain Modern Digital Electronics-5Th Edtion , Bks482550 Gulati Modern Television 5Ed , 9789353166724 Singh Network Analysis And Synthesis, 2Ed , 9789353433123 Van Valkenburg/ Rathode Network Analysis Revised 3Ed , 9788122420364 Wadhwa Network Analysis Synthesis , 9788196874339 Charlie Kaufman Network Security : Private Communication In A Public World , 9781259006166 Kumar Neural Networks , 9789332570313 Haykin Neural Networks And Learning Machines , 9780195696134 Bell Operational Amplifiers & Linear Ics, 3Ed , 9781316610046 Singal Optical Fiber Communication , 9789388178860 Kakani Optical Fiber Communication , 9788131732663 Senior Optical Fiber Communication Principles , 9781138569515 Binh Optical Fiber Communication Systems With Matlab And Simulink Models, 2Ed , 9789380501376 Ramaswami Optical Networksanew Perspective , 9789354667947 Chakrabarti Optoelectronic Devices And Optical Fiber Communication , 9789332902626 Singh Optoelectronics An Introduction To Materials And Devices , 9788131530788 Varmah Power Electronics , 9789353165116 Kothari Power System Engineering 3 E , 9789355429742 Jarmul Practical Data Privacy , 9789391910709 Sri Hari Piratala Principles Of Digital Communication Pb , 9789390113866 Kasap Principles Of Electronic Materials , Bks504954 Mehta Principles Of Electronics 12E , 9789354248429 Dale Seborg Process Dynamics And Control 4Ed , 9788131525906 Farrell Programming Logic And Design , 9781420072051 Pries Project Management Of Complex And Embedded Systems , 9781138625822 Qing Li Real Time Concepts For Embedded Systems , 9781420078688 Minoli Satelitte System Engineerin , 9789354243035 Pratt Satellite Communications , 9788120321984 Patranabis Sensors And Transducers , 9789351073994 Bensky Short Range Wireless Communication 3Ed , 9789354661488 Kani Signal And Systems , 9789354661013 Nagoor Kani Signal And Systems Simplified 2Ed , Bks662299 Anand Kumar Signals & Systems 3Ed , Bks505218 Ramesh Babu Signals And Systems5ed , 9789332550230 Oppenheim Signals And Systems 2/Ed , 9781138570894 Sadiku Signals And Systems A Primer With Matlab , 9788178000169 Lathi Signals System And Communication , 9788187134831 Gupta Solid State Physics And Electronics , 9788126540389 Dr. Shaila D. Apte Speechand Audio Processing,As Per Aicte , 9789357460576 Saxena The 00001 Cfo , 9788131502006 Ayala The 8051 Microcontroller , 9788177584813 Triebel The 8088 & 8086 Microprocessors : Programming , Interfacing, Software, Hardware & Applications 4Ed , 9789351071754 Yiu The Definitive Guide To Arm Cortex M3 And Cortex M4 Processors , 9780521613897 Lee The Design Of Cmos Radio Frequency Integrated Circuits , 9780824799113 Yeshwant Transmission Network Protection , 9780070483576 Khandpur Troubleshooting Electronic , 9788177589184 Palnitkar Verilog Hdl 2Ed +Cd , 9788178000114 Bhasker Verilog Hdl Synthesis A Practical Primer , 9781032906003 Basan Babu Vlsi Circuits And Embedded Systems , 9780849318764 Michael Vlsi Design , 9788126558551 Sunilkumar S.Manvi Wireless And Mobile Networks 2Nd Ed , 9780521704168 Goldsmith Wireless Communication , 9788131218891 Garg Wireless Communicationsand Networking , 978-9332585225 Stallings Wireless Communications & Networks , 9789354248795 Molisch Wireless Communications 2Ed , 9788131520123 Mullett Wireless Telecommunication System & Network , 9781032663159 Saad Asif 5G Mobile Communications Concepts And Technologies , 9781032937908 Rogers A First Course In Machine Learning 2/E , 9780367237370 T Herman A Functional Start To Computing With Python , 9788126504442 David Karlins, Eric Matisoff Adobe Analytics For Dummies , 9781259006135 Bhurchandi Advanced Microprocessors & Peripherals , 9789332575905 Stevens Advanced Programming In The Unix Environment 3/Ed , 9789390078202 Kale Advances In Computer Vision And Information Technology , 9789355422323 Plunkett Ai At The Edge : Solving Real World Problems With Embedded Machine Learning , 9789357469975 Anthony Ai Strategy To Execution , 9780199456666 Harsh Algorithms Design And Analysis , 9780521670357 Gusfield Algorithms On String, Trees And Secquence , 9781032785905 Chuck Easttom An In Depth Guide To Mobile Device Forensics , 9788131532508 Johnson An Intro To Java Programming And Object , 9789353500931 Rahul Dubey An Introduction To Internet Of Things , 9788184890150 Seed An Introduction To Object Oriented Programming In C++2Ed , 9788126557868 Michael Burton Android App Development For Dummies 3Ed , 9789351194095 Kothari Android Application Development (With Kitkat Support) Black Book. , 9788131519035 Sheusi Android Application Development For Java Programmers , 9788126557042 Charles Elliott Smith Anger Management For Dummies 2Ed , 9788131531976 Bronson Ansi C Programming , 9781032603339 Pethuru Raj Applied Learning Algorithms For Intelligent Iot , 9789354601590 Gopal Applied Machine Learning , 9789332553941 Larman Applying Uml Patterns , 9788181476463 Sloss Armsystemdevelopersguide Designningand Optimizing System Software , 9788131267639 Nilsson Artifcial Intelligence : A New Synthesis , 9788181471901 Nilsson Artifical Intelligence : A New Sysnthesis , 9788197817823 Panneerselvam Artificial Intelligence , 9788196544577 Elaine Rich Artificial Intelligence , 9789356069329 Thareja Artificial Intelligence , 9781032939704 Jiang Artificial Intelligence 2/E , 9788126576104 Paul Artificial Intelligence For Dummies , 9789355730428 Saroj Kaushik Artificial Intelligence, 2Ed , 9788126519934 Lavika Goel Artificial Intelligence: Concepts And Applications , 9789356063570 Russell Artificial Intelligence-4 Ed , 9781718502093 Sweigart Automate The Boring Stuff With Python 2Ed , 9788126570850 Mueller Aws For Developers For Dummies , 9789355424280 Salehi Azure Cookbook , Bks642062 Burd Beginning Programming With Java For Dummies 5Ed , 9788126565757 Radha Big Data Analytics 2Ed , 9788126543281 Hurwitz Big Data For Dummies , 9789351198062 Nathan Warren Big Data Principles & Best Practices Of Scalable Real Time Data Systems , 9781032906416 Stefano Tempesta Stephen Ashur Blockchain Applied Practical Technology And Use Cases Of Enterprise Blockchain For The Real World , 9788126599967 Choudhari Blockchain For Enterprise Application Developers , 9781032906454 David Metcalf Blockchain In Healthcare Innovations That Empower Patients, Connect Professionals And Improve Care , 9789389211634 Chandramouli Subramanian Blockchain Technology , 9789357461726 Asharaf Blockchain Technologyalgorithms And Applications , 9788126557660 Saxena Blockchain Technology Concepts And Applications , 9789355429865 Kilroy Blockchain Tethered Ai : Trackable Traceable Artificial Intelligence And Machine Learning , 9781593276515 Davies Book Of R A First Course In Programming And Statistics , 9781484284650 Raina Building An Effective Data Science Practice : A Framwork To Bootstraf And Manage A Successful Data Science Prctice , 9789390168385 Yuan Building Blockchain Apps , 9789355426628 Currie Building Green Software , 9789351199397 Dominique Building The Web Of Things With Examples In Node Js And Raspbeerry , 9789355327888 Sachan Business Statistics Using Python , 9788178002842 Subramanyam C And C++ Programming Concepts And Data Structures , 9789357059565 Deitel C How To Program With Case Studies In App , 9789332585737 Deitel C++ How To Programming, 10Ed , 9788119847181 William Certfied Ethical Hacker ( Ceh ) Exam Cram , 9788120337312 Samanta Classic Data Structures , 9788120352131 Pachghare Cloud Computing , 9788131725337 Miller Cloud Computing , 9781316638101 Bhowmik Cloud Computing , 9789360533953 Elayidom Cloud Computing &Big Data , 9788126570966 Kumar Saurabh Cloud Computing 4Th Ed :Architecting Next-Gen Transformation Paradigms , 9789383635047 Rajeswara Cloud Computing And Virtualization P/B , 9788126570553 Daniel Kirsch Hurwitz Cloud Computing For Dummies , 9788126553068 Rishabh Sharma Cloud Computing Fundamentals Industry Approach And Trends , 9788131776513 Srinivasan Cloud Computing: A Practical Approach For Learning And Implementation , 9789355423832 Storment Cloud Finops 2Ed Collaborative Real Time Cloud Value Decision Making , 9789355427335 Vaughan Cloud Native Development With Google Cloud , 9781032939902 Achary Cloud Reliability Engineering: Technologies And Tools , 9781032938868 Gupta Cloud Security Concepts Applications An Perspectives , Bks642060 Minnick Coding With Java Script For Dummies , 9781680507225 Wengrow Common Sense Guide To Data Structures And Algorithms 2Ed Level Up Your Core Programming Skills A , 9789388934343 Sudha Rani S, Karthi M, Rajkumar Y Compiler Design , 9789357054119 Aho Compilers 2Ed Updated Edtion , 9788131715437 Mir Computer & Communications Networks , 9788131516157 Juneja Computer Fundamentals And C Programming , 9789332519343 Goel Computer Fundamentals And Programming In C , 9788177587654 Hearn Computer Graphics , C Version, 2Ed , 9789353068967 Hughes/Foley Computer Graphics: Principles And Practices , 9789352869152 Douglas E Comer Computer Network & Internets, 6/E , 9789380501932 Peterson Computer Network-A System Approach 5/Ed , 9788131509869 Dave Computer Networks , 9789356063600 Tanenbaum Computer Networks 6Ed , 9789390395095 Toradmalle Computer Networks And Network Design , 9788131524756 Clement Computer Organization & Architecture , 9789356061590 Stallings Computer Organization And Architecture-11Th Ed , 9789351073963 Patterson Computer Organization And Design 6/Ed , 9789355323729 Hamacher Computer Organization And Embedded Systems 6Th Ed , 9788126509836 Dr. M. Usha, T.S. Srikanth Computer System Architecture And Organization, As Per Aicte , 9789332585607 Morris, Mano Computer System Architecture, 3/Ed Update , 9789332550117 Forsyth Ponce Computer Vision A Modern Approach, 2Ed , 9788131267653 Wolf Computers As Components: Principles Of Embedded Computing System Design , 9789356814196 Gkp Converging Technologies By Prof , 9789351199250 Nageswara Rao Core Java : An Integrated Approach, New , 9788119847334 Horstmann Core Java Vol - I : Fundamentals 12Ed , 9788119847433 Horstmann Core Java Volume Ii Advancedfeatures 12 Th Ed , 9789332555365 Chun Core Python Application Programming , 9789388991155 Kiana Danial Cryptocurrency Investing For Dummies , Bks662304 Pachghare Cryptography And Information Security, 3Ed , 9789332543645 Bose Cryptography And Network Security , 9788126522859 Shyamala Cryptography And Security , 9780367148591 Stinson Cryptography Theory And Practice 4/E , 9789355429704 Meyer Css The Definitive Guide 5Ed , 9780199489442 Dejey Cyber Forensics , 9789391818463 Chander Cyber Laws It Protection , 9781032793030 Henrique Santos Cyber Security , 9789390395750 Jain Cyber Security And Cyber Laws , 9789387511675 Nadine Basta Cyber Security And Cyber Laws , 9788126521791 Godbole Cyber Security Understanding Cyber Crimes, Computer Forensics , 9788126560127 Nina Godbole Cyber Threats In Healthcare Understanding Risks And Mitigation , 9788126502950 Bharti Motwani Data Analytics Using Python , 9789352605248 Acharya Data Analytics Using R , 9788126576463 Bharti Motwani Data Analytics With R , 9789332586932 Stallings Data And Computer Communications 10Ed , 9789360536091 West Data Communications And Computer Networks 9/Ed , 9789355320940 Forouzan Data Communications And Networking-6Th Ed , 9788177587852 Dunham / Sridhar Data Mining : Introductory And Advanced Topics , 9781108727747 Parteek Bhatia Data Mining And Data Warehousing : Principles And Practical Techniques , 9789357461672 Bruce Peter Data Mining For Business Analytics Concepts,Techniques And Applications In Python , 9788131519554 Du Hongbo Data Mining Techniques And Application , 9788126533367 Ulrika Jagare Data Sciencestrategy For Dummies , 9789354600333 Thareja Data Science And Machine Learning With R , 9789388991209 Paul Mueller Data Science Programmingal In One For Dummies , 9788131714744 Weiss Data Structures & Algorithm Analysis In C++ 3Ed , 9788177588262 Aho Data Structures & Algorithms , 9788131503140 Gilberg Data Structures : A Pseudocode Approach With C , 9789360539641 Drozdek Data Structures And Algorithms , 9789354247934 Goodrich Data Structures And Algorithms In Java 6Ed , 9789354247866 Goodrich Data Structures And Algorithms In Python , 9781009276979 Subrata Saha Data Structures And Algorithms Using Python , 9789354977190 Reema Thareja Data Structures Using C 3Ed , 9788126577149 R. Venkatesan, S. Lovelyn Rose Data Structures, 2Ed , 9789354643132 Sringeswara Data Visualization : Storytelling Using Data , 9789355733979 Cochran Data Visualization Exploring And Ex , 9789390727506 Silberschatz Database System Concepts 7Th Ed , 9789353438913 Connolly Database Systems6thedn , 9789332518674 Garcia Molina Database Systems : The Complete Book2ed , 9789356061972 Gopal Deep Learning , 9789355424273 Howard Deep Learning For Coders With Fastai & Pytorch , 9789355424976 Kaabar Deep Learning For Finance , 9788126579914 Ashok Kumar Deep Learning Using Python , 9789354642401 Sharma Deep Learning With Tensorflow Js Projects , 9788126579969 Acharya Demystifing Nosql , 9789354248481 Roberto Tamassia Design And Analysis Of Algorithms , 9789332518735 Sheiderman Designing The User Interface , 9788126553495 Emily Freeman Devops For Dummies , 9789355420794 Chin Devops Tools For Java Developers Best Practices From Source Code To Prodction Containers , 9788126579952 Gaikwad Devops Tools From Practitioners Viewpoint , 9789353062019 Mano Digital Design 6Ed , 9788126578399 Dr. Nilakshi Jain, Dr. Dhananjayr. Digital Forensic , 9789332542525 Mano Digital Logic & Computer Design , 9789353433055 Ralph Grimaldi Discrete And Combinatorial Mathematics , 9789390727353 Rosen Discrete Mathematics And Its Applications 8Th Ed , Bks323747 Sunita Distributed Computing , 9781107648906 Kshemkayani Distributed Computing , 9789332549807 Tanenbum Van Steen Distributed Systems Principles , 9789391820244 Kumar Pawan Dive Into The World Of Blockchain Technology , 9789355423962 Oggl Docker Practical Guide For Developers And Devops Teams , 9789355423955 Kane Docker Up & Running 3Ed , 9788126576128 Rose Enterprise Agility For Dummies , 9788126520107 Anami Formal Languages And Automata Theory , 9789383635788 Srinivasa Formal Languages And Automata Theory P/B , 9788126519910 Mayor Ramgir Full Stack Java Development With Spring Mvc, Hibernate, Jquery, And Bootstrap , 9789355424686 Painter Functional Programming With C# , Bks561666 Karegowdaag Fundamentals Of C And Data Structures , 9788173716126 Horowitz Fundamentals Of Computer Algorithms 2Ed , Bks655202 Rajaraman Fundamentals Of Computers 6Ed , 9781032786001 Wagh Manisha Fundamentals Of Data Science , Bks662063 Horowitz Fundamentals Of Data Structures In C 2Ed , 9789355420121 Buduma Fundamentals Of Deep Learning 2Ed : Designing Next Generation Machine Intelligence Algorithms , 9789360531027 Lambert Fundamentals Of Python First Programs , 9789355428301 Jim Fuzzy Data Matching With Sql , 9789332549425 George Klir Bo Yuan Fuzzy Sets And Fuzzy Logic Theory And Application , 9789386052865 John R Larsen Get Programming With Javascript , 9789353506261 Nelson Guide To Computer Forensics & Investigation , 9789355424181 Kofler Hacking And Security The Comprehensive Guide To Penetration Testing And Cybersecurity , 9788126577040 Kevin Beaver Hacking For Dummies 6Ed , 9788126550517 Paul Hadoop For Dummies , 9788177228137 Chuck Lam Hadoop In Action , 9789355422415 Garcia Hands On Selenium Webdriver With Java A Deep Dive Into The Development Of End To End Tests ( Covers Selenium 4 ) , 9789355420701 Gandhi Head First Git A Learners Guide To Understanding Git From The Inside Out , 9789354240027 Motwani Hr Analytics Practical Approach Using Python , 9781032605197 Anne Implementing Cybersecurity , 9788126553051 Kulkarni Information Theory & Coding , 9789352868599 Deitel Internet & World Wide Web How To Program , 9789388991018 Shriram Vasudevan Internet Of Things 2Ed , 9789354247842 Raja Rao Internet Of Things An Indian Adaptation Concepts , 9789390727384 Raj Kamal Internet Of Things-2Ed , 9781292364902 Paul,Deitel Intro To Python For Computer Engineering Science And Data Science , 9789351199373 Davy Cielen Introducing Data Science Big Data Machine Learning , 9788131703069 Charniak Introduction To Artificial Intellegence , 9789332551947 Patterson Introduction To Artificial Intelligence , 9789351073901 Sayood Introduction To Data Compression 5Ed , 9789354640506 Maheswari Introduction To Data Science : Practical Approach With R And Python , 9788131713921 Kamthane Introduction To Data Structures In C , 9781032983585Chapman & Hall Introduction To Financial Derivatives With Python , 9789351194736 Surya Introduction To Information Security & Cyberlaws , 9781108959742 Misra Introduction To Iot , 9789357055048 Liang Introduction To Java Programming And Data Structures , 9781307918618 Martin Introduction To Language And The Theory Of Computation , 9781009069533 Subodh Kumar Introduction To Parallel Programming , 9789357055284 Daniel Liang Introduction To Python Programming And Data Structures 3Ed , 9788126550548 Jesse Feiler Ios App Development For Dummies , 9789386873743 Hanes Iot Fundamentals , 9789351197430 Urma Fusco Java 8 In Action , 9789351198468 Editorial Services Java 8 In Simple Steps , 9789351197584 Editorial Services Java 8 Programming Black Book , Bks642061 Barry Burd Java For Dummies 7Ed , 9789360538200 Farrell Java Programming , 9781032941462 Gans Javascript For Data Science , 9789355422729 Ackerman Javascript The Comprehensive Guide , 9781009211918 Sarma Joy With Java , 9789355421074 Jacques Jump Start Vue.Js 2Ed Build Your Own Sophisticated Web Apps , 9789355429773 Skoulikari Learning Git , 9789355425331 Bodner Learning Go 2Ed An Idiomatic Approach To Real World Go Programming , 9789355424440 Loy Learning Java 6Ed , 9789355429803 Osmani Learning Javascript Design Patterns 2Ed , 9789355427304 Andersson Learning Microsoft Azure , 9789355422507 Arnold Learning Microsoft Power Bi Transforming , 9789355422934 Hausenblas Learning Modern Linux A Handbook For The Cloud Native Practitioner , 9789351198147 Allen Downey Learning Python , 9789352132560 Swartz Learning Scala , 9789355428110 Kofler Linux The Comprehensive Guide , 9781316506110 Peter Flach Machine Learning , 9788126578511 Anuradha Machine Learning , 9781032937922 Mohammed Machine Learning Algorithms And Applications , 9781032746203 Geetha Sendhilkumar Machine Learning Concepts Techniques And Applications , 9781032707136 Gupta Brij B Machine Learning For Computer & Cyber Securitypb , 9781032941202 Agarwal Machine Learning For Healthcare Handling And Managing Data , 9781032937328 Tsai Machine Learning For Knowledge Discovery With R Methodologies For Modeling Inference And Prediction , 9789391540463 Rao Machine Learning In Data Science Using Python , 9789354246111 Kumar Rahul Machine Learning Using R , 9781009170246 Bhatia Machine Learning With Python , 9789355429292 White Making Embedded Systems 2Ed , 9789355422088 Gough Mastering Api Architecture : Design Operate And Evolve Api Based Systems , 9789355329509 Buyya Mastering Cloud Computing 2Ne Ed , 9789357462952 Seema Mastering Data Visualization Using Tableau , 9789383635818 Satyanarayana Mathematical Foundation Of Computer Science , 9788119847884 Avinash Valiramani Microsoft Azure Networking : The Definitive Guide , 9788119847372 Paul Mcfedries Microsoft Excel Formulas And Functions , 9788119847006 Tracy Syrstad Microsoft Excel Vba And Macros , 9788119847280 Sharp John Microsoft Visual C# Step By Step , 9781009566872 Jure Leskovec Rajaraman Mining Of Massive Datasets, 3Ed , 9788131731666 Garg Mobile Computing , 9789361595134 Tanenbaum Modern Operating Systems5th Ed , 9789355421685 Smirnova Mysql Cookbook 4Ed , 9789357462389 Bhattacharya Natural Language Processing , 9789353433123 Van Valkenburg/ Rathode Network Analysis Revised 3Ed , 9789355423900 Oswalt Network Programmability And Automation 2Ed , 9788196874339 Charlie Kaufman Network Security : Private Communication In A Public World , 9781259006166 Kumar Neural Networks , Bks660656 Rajasekaran & Pai Neural Networks , Fuzzy Sys .& Evolutionary Algor 2Ed , 9789332570313 Haykin Neural Networks And Learning Machines , 9789332549883 Jang Sun Mizutani Neuro Fuzzy And Soft Computing , 9789386052049 Young Node.Js In Action, 2Ed , 9789355422712 Buckler Nodejs Novice To Ninjathe Ultimate Guide To , 9788126516582 Shukla Object Oriented Programming In C++ , 9788131722824 Lafore Object Oriented Programming In C++ 4Ed , 9789389949186 Balagurusamy Object Oriented Programming With C++ 8Th Edn , 9789386858962 Tripti Paul Object-Oriented Programming Using Ja , 9789389552300 Barnes Objects First With Java : A Practical , 9781009349185 Rahul Vaze Online Algorithms , 9789357460569 Silberschatz Operating System Concepts 10 Th Ed , 9789332550513 Tanenbaum Woodhull Operating Systems Design And Implementation , 9789354437892 Panneerselvam Operations Research , 9789352865277 Hamdy Taha Operations Research :An Introduction-10Th Ed , 9789389538779 Hubbard Outline Of Programming With Java , 9781032850702 Vivek Kale Parallel Computing Architectures And Apis , 9789354244391 Richard Duda Peter Hard Pattern Recognition 2Ed , 9789355421067 Butler Phpmysql Novice To Ninja 7Ed , 9788126576005 Blum Php,Mysql & Javascript All-In-One For Dummies , 9789351194378 Nina Practical Data Science With R , 9789390820658 Bhattacharyya Practical Handbook Of Machine Learning , 9781493988280 Burnstein Practical Software Tesing , 9788126567935 Anasse Bari Predictive Analytics For Dummies , 9788126577132 Sivanandam Principles Of Soft Computing 3Ed , 9789390113026 Kamthane Programming And Problem Solving With Python 2Ed , 9789388818735 Yadav Rajiv Khanna Programming For Problem Solving Using C , 9788126519927 Wiley Editorial Programming For Problem Solving, As Per Aicte , 9789355326720 Balagurusamy Programming In Ansi C 9Ed , 9780198097402 Harsh Bhasin Programming In C# , 9788126562008 Butow Programming Interviews For Dummies , 9780198083962 Trivedi Programming With Ansi C++ , 9789360537753 Mcmullen Programming With C++ , 9789355325891 Balagurusamy Programming With Java 7Ed , 9789360534783 Mcmullen Programming With Python , 9788131711347 Bratko Prolog : Programming For Aritificial Intelligence, 3Ed , 9788197402555 Muthu Python And Data Science , 9789357465304 S. Horstmann Python Foe Everyone, 3Ed , 9788126524938 Massaron Python For Data Science For Dummies 2Ed , 9781041000822 Rakesh Nayak Python For Engineers And Scientists Con & App , 9789354973765 Reema Thareja Python Programming , 9789386668004 Dawson Python Programming For The Absolute Beginner , 9789352835102 Murali Mohan Python With Machine Learning , 9781032983738 Helmut Bez Quantum Computation , 9789352604555 Rakshit R For Beginners , 9789355429827 Wickham R For Data Science 2Ed , 9789386873521 Lander R For Everyone : Advanced Analytics And Graphics , 9781032940274 Harrison R For Health Data Science , 9789351198079 Kabacoff R In Action , 9789355423771 Monk Raspberry Cookbook 4Ed - Software And Hardware Problems & Solutions , 9781032785912 Chris Roda Real Time Visual Effects For The Technical Artist , 9789354641336 Acharya Reimagining Data Visualization Using Python , 9788132202271 Dzeroski Sasd Relational Data Mining , 9781041000631 Subhankar Das Search Engine Optimization And Marketing , 9781009284332 Deepak Search Methods In Artificial Intelligence , 9788126564064 Kambhampaty Service-Oriented Architecture & Microservices Architecture, 3Ed : For Enterprise, Cloud, Big Data And Mobile , 9781107512818 Reza Zafarani Social Media Mining , 9789354247835 Tanmoy Chakraborty Social Network Analysis , 9788122423600 Aggarwal Software Engineering 3Ed , 9789355325044 Pressman Software Engineering 9Th Ed , 9789390555475 Suman Software Engineering Concepts , 9789332582699 Lan Sommerville Software Engineering, 10/Ed , 9781107652781 Singh Software Testing , 9788177581218 Desikan Software Testing : Principles & Practice , Bks642975 Chauhansoftware Testing 2Ed , 9789355422057 Korotkevitch Sql Server Advanced Troubleshooting And Performance Tunning Best Practices And Techniques , 9789390466078 Molly Monsey Tableau For Dummies , 9788177584813 Triebel The 8088 & 8086 Microprocessors : Programming , Interfacing, Software, Hardware & Applications 4Ed , 9789361591471 Omar Santos The Ai Revolution In Networking Cybersecurity And Emerging Technologies , 9789332549449 Brian Kernighan The C Programming Language , 9789356060135 Stroustrup The C++ Programming Language-4Ed , 9781498770354 Honbo The Internet Of Things In The Cloud , 9788120329683 Mishra Theoryof Computer Science , 9788126533114 Mahesh Theory Of Computation A Problem-Solving Approach , 9789357460392 Gookin Troubleshooting & Maintaining Ps All In One For Dummies , 9781107512825 Shai Shalev Understanding Machine Learning From Theory To Algorithms , 9788131521564 Flynn Understanding Operating System , 9789355425027 Franz Usability And User Experience Design , 9789355735577 Albright Vba Modelers : Developing Decision Sup , 9780367241773 John Hattie Visible Learning Into Action: International Case Studies Of Impact , 9789361595646 Lindy Ryan Visual Analytics Fundamentals , 9788131717158 Jackson Web Technologies , 9788177229974Kognt Web Technologieshtml Javascript Php Java Jsp Asp .Ne , 9789353432751 Michael Artin Algebra2nd Edition , 9788119896554 Carlberg Bayesian Analysis With Excel And R , 9789388005364 Veerarajan Complex Analysis , 9781493991099 Wells Differential Analysis On Complex Manifolds, 3Ed , 9789388005234 Veerarajan Differential Calculus , 9789388005371 Arumugam Differential Equations And Applications , 9789353433055 Ralph Grimaldi Discrete And Combinatorial Mathematics , 9789388005159 Veerarajan Fourier Series And Integral Transforms , 9781009243902 Prahlad Vaidyanathan Functional Analysis , Bks361487 Sankara Intro To Partial Differential Equations , 9789391549893 Ubaidullah Linear Algebra , 9789332550070 Hoffman Funze Linear Algebra , 9781032983615 Lina Oliveira Linear Algebra , 9789357059688 Lay Linear Algebraand Its Applications 5Th Ed , 9788131530245 Poole Linear Algebra A Modern Introduction , 9789388005111 Arumugam Modern Analysis , 9789353163815 Veerarajan Numerical Methods , 9789352865277 Hamdy Taha Operations Research :An Introduction-10Th Ed , 9789395161404 Prasad Partial Differential Equations , 9789356062733 Vijayakumari Statistics And Numerical Methods 10Ed , 9789385462603 Mishra Theory Of Tranforms With Applications , 9788119896608 Hass Thomas Calculus 15Ed , Bks294199 Ghoshal Atomic Physics (Modern Physics) , 9788131758915 Goldstein Classical Mechaincs , 9781032983608 Carolina C Llie Classical Mechanics Problems And Solutions , 9781944660987 Parames Concepts In Practice Physice: A Concise Introduction To The Standard Model , 9789352606955 Malik Engineering Physics , 9789386873316 Sharma Engineering Physics , 9781009338424 Sengupta Introduction To Quantum Mechanics , 9780521139878 Riley Mathematical Methods For Physics And Engineering 3/E , 9789354244681 Krane Modern Physics 4Ed An Indian Adaptation , 9788126552566 Walker Halliday Principles Of Physics 10Th Ed Isv , 9789357460835 David Halliday Principles Of Physics Extended 12 Ed , 9788131708392 Bransden Quantum Mechanics , 9788120336353 Aruldhas Quantum Mechanics 2Ed , 9789354640773 Zettili Quantum Mechanics Concepts And Applications , 9781009446556 Deshmukh Quantum Mechanics: Formalism, Methodologies And Applications , 9789380156248 Basu Solid State Engineering Physics , 9781032791456 Roopchand Activated Carbon Adsorption , 9788173713859 Krupadanam Analytical Chemistry , 9789388991094 Christian Analytical Chemistry An Indian Adaption , 9789390211562 Pasada Rao Basic Quantum Chemistry P.B , 9781032728971 Depan D. Biodegradable Polymeric Nanocomposites: Advances In Biomedical Applications , 9788194726364 Albert Cotton Chemical Applications Of Group Theory , 9789389974935 Sarka Fundamentals Of Analytical Chemisty P.B , 9788178000619 Anjaneyulu Introduction To Environmental Science , 9789381075920 Braun Introduction To Instrumental Analysis 2/Ed , 9781032512020 K M Mackay,R M Mackay Introduction To Modern Inorganic Chemistry 6 , 9789354240201 Charles Poole Frank Introduction To Nanoscience And Nanotechnology , 9781138096882 Mark Schulz Nanoengineering Of Strucatural Functional And Smart Materials , 9788187134114 Ghoshal Numerical Problems On Physical Chemistry , 9789387593848 Alagarsamy Organic Chemistry: A Comprehensive Approach (Pb) , 9789389802085 Kalsi Organic Reactions And Their Mechanisms 5/Ed , 9788194897439 Lal Physical Chemistry , 9788178002019 Mukkanti Practical Engineering Chemistry , 9789393796004 Unique 12.07.2 Upsc Cse Main Answer Writing Skills - Tp , 9788119361052 Unique 13 Years Upsc Civil Services General Studies Csat Previous Papers - Ii , 9788119361281 Singh 29 Years Upsc Previous Papers , 9780367237356 R L Trask A Dictionary Of Phonetics And Phonology , 9788119348015 Bk Pub A House Of Pomegranates , 9781032296425T Hawkes Alternative Shakespeares (Vol-2) , 9789387265523 Bk Pub An Enemy Of The People , 9789390113644 Ponam Dalal Dahiya Ancient And Medieval India 2Nd Edn , 9788126569502 Wiley Aptipedia Aptitude Encyclopedia 2 Ed , 9789355320414 Vinay Art And Culture Q.B.--3Ed , 9789355324832 Prashant Jagtap Capf Paper 1 General Studies , 9789357052719 Thorpe Concise General Knowledge Manual 2024 , 9789387572324 Edgar Thorpe Course In Mental Ability And Quantitatine Aptitude , 9781032937199 Plucker Creativity And Innovation Theory Research And Practice 2/E , 9789357059343 Sinha Data Interpretation For Cat , 9789355424457 Das Entrepreneurial Designs For Start Ups , 9788119361144 Unique Ethics Made Easy , 9789395259750 Unique Excellence In Governance , 9781032296395 R Jackson Fantasy , 9781032296876 T Bennett Formalism And Marxism , 9788119361267 Unique Fundamentals Of Ethics , 9789356814257 Cl Educate Gate 2025 - Computer Science And Information Technology - Guide By Gkp , 9789356817593 C L Educate Gate 2025 Civil Engineering - Guide By Gkp , 9789356815728 Gkp Gate 2025 Electrical Engineering Guide , 9789356819306 Gkp Gate 2025 Electronics And Communication Eng.Guide , 9789356813885 Cl Educate Gate 2025 General Aptitude - Guide Gkp450 , 9789356814073 Kuldeep Chaudhary Gate 2025 Mathematics , 9789356817746 Gkp Gate 2025 Mechanical Engineering Guide , 9789393796479 Unique General English , 9789357052672 Thorpe General Knowledge Manual 202422/Ed , 9788119361724 Unique General Knowledge Manual 2025 , 9789356819474 Sasikumar General Studies Csat Paper Ii , 9789355327796 Mhe General Studies Paper - I ( 2025 ) , 9789355329929 Mhe General Studies Paper - Ii For Civil Services Preliminary Examination , 9789391061982 Gkp General Studies Paper - Ii For Upsc Civil Service , 9789389573961 Majid Husain Arora General Studies Paper I In 100 Days , 9789385507359 Jonathan Swift Gullivers Travels , 9789355327024 Arun Sharma How To Prepare For Quantitative Aptitude11th Edn , 9788119896035 Pearson Ibps Clerk Mains Mock Tests , 9788119896660 Pearson Ibps Clerk Pre Mock Tests , 9788119896127 Pearson Ibps Po Mains Mock Test , 9788119896059 Pearson Ibps Po Pre Mock Tests , 9789361593840 Agrawal Indian Economy 2Nd Ed , 9789390219179 Reddy Indian History 3E , 9788119361892 Singh Indian Polity Mind Maps 3Rd Ed , 9789355320100 Vinay Indian Polity Q.B-4Ed , 9788119361151 Unique Internal Security , 9789395259743 Unique International Relation Diplomacy Primer , 9789357059336 Sinha Logical Reasoning For Cat , 9789391968281 Bk Pub Lost Horizon , 9781032906546 Catherine Stothart Motivation The Ultimate Guide To Leading Your Team , 9789391968946 Bk Pub My India , 9781032511580 C Dionne,P Kapadia Native Shakespeares , 9789355015075 Aggarwal Objective General English , 9781032296449 A Loomba Post Colonial Shakespeares , 9789355321725 Laxmikanth Public Administration-2Ed , 9788126549306 Anand Quantitaive Aptitude , 9789358705010 Aggarwal Quantitative Aptitude , 9788126559008 Tcy Online Reasoning Ability And Quantitative Aptitude , 9789387265561 Daniel Defoe Robinson Crusoe , 9788119896349 Pearson Sbi Clerk Main Mock Tests , 9788119896745 Pearson Sbi Clerk Pre Mock Tests , 9788119896684 Pearson Sbi Po Mains Mock Tests , 9788119896363 Pearson Sbi Po Pre Mock Tests , 9789357055772 Naveen Kumar Science And Technology , 9789355320025 Vinay Science And Technology Q.B. 4Ed , 9789395259965 Unique Secret History Of Selections Of Supreme Court Judges , 9789391968588 Shakespeare Sonnets And A Lovers Complaint , 9789391968939 Bk Pub Stories From Tagore , 9789395259477 Unique Syllabus 2023 With Planning Suggestions & Strategies , 9781032886206 Vallikannan Tamil Prose After Bharathi Pb , 9781032296388 S Cohan Telling Stories , 9789395515917 Hardy Tess Of The D Urbervilles , 9789391549237 Anantharani The Chapter On Wealth , 9789385507519 Fitzgerald The Great Gatsby , 9788119348039 Bk Pub The Importance Of Being Earnest , 9789393796417 Verma The Indian Economy , 9789391968465 Kipling The Jungle Book , 9789383635511 Rao The Noble Laureates And Their Legacies Set Of 2 Vols , 9788119376056 Bunyan The Pilgrimsprogress , 9789391968663 Gibran The Prophet , 9788119348909 Bk Pub The Rivals , 9788119348862 Bk Pub The Sea Wolf , 9789385507441 Bk Pub The Woodlanders , 9789385507557 Jerome Three Men In A Boat , 9789357461764 Dipak Kumar Training And Development Theories And Applications 2Ed , 9789356813229 Gkp Upsc 2024 General Studies Paper-2(Csat) 21 Practice Papers , 9789356813113 Gkp Upsc-2024 General Studies Paper -1- 21 Practice Papers , 9789357052825 Sinha Verbal Ability And Reading Comprehension For Cat 5/Ed , 9788126554294 Anand Lalit Singh Verbal Ability And Reasoning For Competitive Examinations , 9788119361175 Pavaneet Singh 45 Years Upsc Civil Srvices Previous Paper , 9789390395514 Wiley Wiley Acing The Interviews
Contract Date: Nov 04, 2025 Contract Value : ₹ 6.81 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
34.
Defence #8113046 AOC
Tender For Provision Of Otm Accommodation For Af Station Adampur.; 1 SCHEDULE `A PART - I (Building / Structure Works) is not prepriced by MES and prepriced rates indicates0.00 under column 5 signifies this fact only. 2 Construction of TECH LAB including VIFT & Traverse wall complete in all respect all asshown on drawings & as specifiedin tender documents. Note :- 11. EOT crane including gantry girders as shown on drawing shall be measured and paid separately under respective item of BOQ. However cost of RCC bracket for gantry girder shall be deemed to be included in lumpsum quoted rate. 2.PCC Road/Hard standing shown on drwaing in front side shall be measured & paid separately under respective item of BOQ under respective schedule for Road and Culvert. However plateform/Ramp shown in front shall be deemed to be included in lumpsum quoted rate.3. Sliding roller shown at entry gate of preservation/ depreservatio room shall be measured and paid separately under respective item of BOQ. 4. Fire fighting Board and Fire Point shall be measured and paid separately under respective item of BOQ. 3 Construction of Adm Block Building complete as per specificationsand asshown on drawings complete. 4 Construction ofGround Equipment Bay Building complete as per specificationand asshown on drawings complete. 5 Construction of ASV BAY with Apron complete as per specificationand asshown on drawings complete. 6 Construction ofMT Section Building complete as per specificationand asshown on drawings complete. 7 Construction of POL STORE Building complete as per specificationand asshown on drawings complete. 8 Construction of GUARD REST ROOM Building complete as per specificationand asshown on drawings complete. 9 Construction of RCC WATCH TOWER Type -DDOUBLE STOREY all as per specificationand asshown on drawings complete. 10 Construction of AC Plant Room & Sub Station Building including AHU Building all as per specificationand asshown on drawings complete. 11 Construction of Static Water Tank (SWT) 225000 ltr capacity all as per specificationand asshown on drawings complete. 12 Construction of RCC overhead reservoir ofCAPACITY 15000 Glns and 21M Staging Height all as per specificationand asshown on drawings complete. 13 Construction ofRCC Septic Tank for 50 users, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffale walls and RCC slab including beams etc with vent shaft , manhole opeing with cover connections etc, complete with effective depth 1.5 meter and overall depth 3 mtrcomplete all as specified and as shown on drawing No CEAF/STD/ST-118/22 Sheet 1/3 to 3/3 14 Construction ofRCC Septic Tank for 25 users, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffale walls and RCC slab including beams etc with vent shaft , manhole opeing with cover connections etc, complete with effective depth 1.5 meter and overall depth 3 mtrcomplete all as specified and as sown on drawing No CEAF/STD/ST-118/22 Sheet 1/3 to 3/3 15 Construction of Soakage well excavation, in any type of soil , foundation, in PCC 1:3:6, walls of hony combed masoonary with top ring of M-25 concrete including interceptiing chamber and screen chamber made of brick masoanry in CM, RCC cover slab in M-25/SFRC cover, inter connecting pipes of RCC /DWC complete filled with brick bats of size 2.40m dia x 3.00m effective depth complete all as per Drg No.CEAF/STD-301/90 sheet 1/4 to 4/4 and as specified. 16 Construction of Soakage well excavation, in any type of soil , foundation, in PCC 1:3:6, walls of hony combed masoonary with top ring of M-25 concrete including interceptiing chamber and screen chamber made of brick masoanry in CM, RCC cover slab in M-25/SFRC cover, inter connecting pipes of RCC /DWC complete filled with brick bats of size 1.80m dia x 3.00m effective depth complete all as per Drg No.CEAF/STD-301/90 sheet 1/4 to 4/4 and as specified. 17 M&L for Sliding Rollers 1mtr wide and 8.15mtr long having frame made out of MS Angle iron 75mmx75mmx8mm, rollers made out of GI pipe 50mm heavy grade fixed to frame@ 100mm c/c alongwith MS bearings and axle rod 12mm to 16mm passing through both sides bearings and fixed with frame for smooth sliding of loads complete all as specified and as directed. 18 NOTE: Schedule ‘A’ Part IIto XIV under Ser No 2.01 to 2.13 are Prepriced by MES. 19 Lump sum price worked out by the Contractor for “ SITE DVELOPMENT, EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’Part II 20 Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’Part III 21 Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY as listed in Schedule ‘A’Part IV 22 Lump sum price worked out by the Contractor for SEWAGE DISPOSAL” as listed in Schedule ‘A’Part V 23 Lump sum price worked out by the Contractor for “AREA DRAINAGE as listed in Schedule ‘A’Part VI 24 Lump sum price worked out by the Contractor for “ROAD, PATH AND CULVERT ” as listed in Schedule ‘A’Part- VII 25 Lump sum price worked out by the Contractor for “FENCING AND GATE ” as listed in Schedule ‘A’Part- VIII 26 Lump sum price worked out by the Contractor for“EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’Part - IX 27 Lump sum price worked out by the Contractor for“EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’Part - X 28 Lump sum price worked out by the Contractor for“LIGHTENING PROTECTION” as listed in Schedule ‘A’Part - XI 29 Lump sum price worked out by the Contractor for“REFRIGERATION” as listed in Schedule ‘A’Part - XII 30 Lump sum price worked out by the Contractor for“EOT CRANE” as listed in Schedule ‘A’Part - XIII 31 Lump sum price worked out by the Contractor for DEMOLITION AND DISMANTLING” as listed in Schedule ‘A’Part XIV 32 SCHEDULE `A PART - XV MISC ITEMS (B/R & E/M)is not prepriced by MES and prepriced rates indicate 0.00 under column 5 signifie this fact only. 33 MISC B/R WORKS - ROAD HARDSTANDING AND CULVERT, FENCING ETC (Rate against each item to be quoted by bidder ) 34 M&L for 150 mm thick GSBC (Granular sub base concrete) grading I as per table 400-1 morth specifications and mixed with 35% coarse graded crushed stone agg by providing close graded material mixing by any means as per site conditions, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne capacity and maintaining the required density, grading and moisture content as per MORTH specifications, compacted stabilised sub base of 98% MDD to achieve saturated stabilised K Valve of min 4.0 Kg/sqcm complete all as specified and as directed 35 M & L for painting 2mm thick with thermoplast fluorescent paint of colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic (commercial) machine drive in strips after preparation of surfaces as per manufacturers instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport), Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfacesexceeding 10 cm but not exceeding 2cm In width or girth, complete all as specified and as directed. 36 S & F solar delinator, with four ultra bright flashing LEDs, polycarbonate and toughened aluminium alloy body, fitted on MS pipe 50mm dia (apprcx 1.00 m long ), powder coated, anti rust, fixed in position in PCC 1:2:4 block 20cmx20cmx30cm with necessary fixing arrangement as per manufacturers instructionscomplete all as specified and as directed. 37 S & Fsolar stud 125mmx125mmx25mm aluminium alloy shell with rechargable battery, LED 03 Nos each side (total 06 Nos), flash rate and colour as approved by GE, fixed in position with necessary fixing arrangements as per manufacturers instructions,complete all as specified and as directed. 38 M&L for600 mm NP2 RCC Hume pipe under ground duct from ASV Bay to Test Lab as shown on site plan & Drg No CEAF/ADM/SK-05/2024 sheet No 1R/1 and CEAF/ADM/WD/ST-333-01/2024 sheet No 03R/5 39 Supply and fixing concertina coil of 600mm dia complete all as specified and as directed. 40 M&L for construction of steel gate 5.50 m wide and 2.75m high from road level alongwith wicket gate for security fencing including PCC MS work, excavation and earthwork in any type of soil, RCC pillars, painting of MS surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, distempering of RCC pillars with exterior emulsion paint over primeretc. complete all as specified and as shown on drawings No CEAF/STD-151-2002 sheet 1/2 to 2/2 dated 02/11/2002. 41 MISC INT/EXT ELECTRIFICATION (Rate against each itemto be quoted by the bidder) 42 Construction of Wall Mounted Fire Points with 06 buckets and 06 fire extinguiser each complete in all respect shown on drawing No CEAF/STD/190/2014 Sheet 1/1 & as specifiedin tender documents. 43 S&F Fire symbol board of size 1200mm x 1650mm made out ofMS Sheet 1.60mm thick with frame made out of angle iron 50mm x 50mm x 6mm, embeded in PCC block (1:2:4) type B-1 of size 450mmx450mmx500mm, painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 44 S&F LED bulb, 09 watt, 230 volts retrofit type cornp!ete all as complete all as specified and as directed. 45 Supply & Fixing LED security light 15 watt, input 110 to 220 volts as per IP 65 luminaries comprising of rectangular shape, high pressure die cast aluminium housing, with weather proof gaskets for lamp and driver compartment with GI pipe 25 mm dia light grade bend to shape including necessary fixing arrangement complete all as specified and as directed. 46 S&F MCB SP 6 to 32 Amps, C curve type 10 KA breaking capacity, 240 Volts completeall as specified and as directed. 47 S&F MCB SPN 40 Amps, C curve type 10 KA breaking capacity, 240 Volts completeall as specified and as directed. 48 S&F MCB TPN 63 Amps, C curve type 10 KA breaking capacity, 415 Volts completeall as specified and as directed. 49 Supply andfixVoilagestabilizer forautomatic operation, singlephase manualy air cooled indoor type & designed for input variation belween 170 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA, complete all as specified and as directed. 50 Supply andfixVoilagestabilizer forautomatic operation, singlephase manualy air cooled indoor type & designed for input variation belween 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA, complete all as specified and as directed. 51 S&F of vertical type load line Distribution Board, double door, 8 way, AC, 3 phase, 415 Volts, TPN bus bar 200 Amps rating and earth bar & din rail including MCCB 125 Amp,16 KA 4 Pole as incomer Distribution board suitable for three / single phase MCBs outgoing complete all as specified and as directed. 52 S&F of vertical type load line Distribution Board, double door, 8 way, AC, 3 phase, 415 Volts, TPN bus bar 200 Amps rating and earth bar & din rail including MCCB 63 Amp,16 KA 4 Pole as incomer Distribution board suitable for three / single phase MCBs outgoing complete all as specified and as directed. 53 S&F of vertical type load line Distribution Board, double door, 12 way, AC, 3 phase, 415 Volts, TPN bus bar 200 Amps rating and earth bar & din rail including MCCB 100 Amp, 25 KA 4 Pole as incomer Distribution board suitable for three / single phase MCBs outgoing complete all as specified and as directed. 54 S&F of vertical type load line Distribution Board, double door, 12 way, AC, 3 phase, 415 Volts, TPN bus bar 400 Amps rating and earth bar & din rail including MCCB 250 Amp, 25 KA 4 Pole as incomer Distribution board suitable for three / single phase MCCBs including outgoing as MCCB TP 125 Amps 25 KA -01 No, MCCB TP 100 Amps 25 KA -01 No, and MCCB TP 63 Amps 16 KA -01 No complete all as specified and as directed. 55 S&F MCB TP 5-32 Amps, C curve type 10 KA breaking capacity ,415 voltscomplete all as specified and as directed. 56 S&FThreepole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 20 amps capacity completeall as specified and as directed. 57 M & L for sub main wiring with Three single core FRLSH, PVC insulated, multistranded, unsheathed copper conductor cable with size 04 Sqmm and drawing through& including Non metallic PVC rigid conduit concealed in wall including earth continuity conductor of size 04 Sqmm PVC insulated unsheathed multi stranded copper conductor cable with suitable size of PVC Conduit as per IS mm and connected to earth dolly including connecting to main boardcompleteall as specified and as directed. (Note :- Three runs of Cable, One run of conduit and one run of earth wire shall be measured and one unit). 58 M&L for flame proof,zone I & II, Gas Group II A/ II B, weather proof submain wiring with four runsusing approved colour coding as per IS, zero hologen flame retardent (HFFR) smoke free non toxic non corrosive PVC insulated unsheated flexible copper conductor cable 6.0 Sqmm (nominal area) single core 1100 voltsand one run earth wire of 6.0 Sqmm in and including ERW stove enamelled black rigid conduit of required size but not less than 25mm dia, flame proof conduit accessories such as tee, bend, elbow, junction box completeall as specified and as directed. (Note :- Four runs of Cable, One run of MS conduit and one run of earth wire shall be measured and one unit). 59 M&L for flame proof,zone I & II, Gas Group II A/ II B, weather proof submain wiring with four runsusing approved colour coding as per IS, zero hologen flame retardent (HFFR) smoke free non toxic non corrosive PVC insulated unsheated flexible copper conductor cable 4.0 Sqmm (nominal area) single core 1100 voltsand one run earth wire of 4.0 Sqmm in and including ERW stove enamelled black rigid conduit of required size but not less than 25mm dia, flame proof conduit accessories such as tee, bend, elbow, junction boxcompleteall as specified and as directed. (Note :- Four runs of Cable, One run of conduit and one run of earth wire shall be measured and one unit). 60 M&L for flame proof,zone I & II, Gas Group II A/ II B, weather proof submain wiring with four runsusing approved colour coding as per IS, zero hologen flame retardent (HFFR) smoke free non toxic non corrosive PVC insulated unsheated flexible copper conductor cable 2.5 Sqmm (nominal area) single core 1100 voltsand one run earth wire of 2.5 Sqmm in and including ERW stove enamelled black rigid conduitof required size but not less than 20mm dia, heavy duty,flame proof conduit accessories such as tee, bend, elbow, junction boxcompleteall as specified and as directed. (Note :- Four runs of Cable, One run of conduit and one run of earth wire shall be measured and one unit). 61 M&L flame proof,zone I & II, Gas Group II A/ II B, weather proof point wiring for one light/fan/indepedant socket point controlled by one switch using approved colour coding as per IS with zero hologen flame retardent (HFFR) smoke free non toxic non corrosive PVC insulated unsheated flexible copper conductor cable 1.5 Sqmm (nominal area)single core 1100 volts grade in and including (ERW) stove enamelled black rigid conduitof required size but not less than 20mm dia,heavy duty ISI marked duly welded, flame proof weather proof junction box, tee, bends, inspection bends etc all as required includingPVC insulated unsheated flexible copper conductor cable 1.5 Sqmm (nominal area) single core 1100 volts grade as earth continuity conductorcompleteall as specified and as directed. 62 M&Lflame proof,zone I & II, Gas Group II A/ II B,weather proof point wiring for one socket point controlled by one switch using approved colour coding as per IS with zero hologen flame retardent (HFFR) smoke free non toxic non corrosive PVC insulated unsheated flexible copper conductor cable 4.0 Sqmm (nominal area)single core 1100 volts grade in and including (ERW) stove enamelled condiuit heavy duty ISI marked duly welded, flame proof weather proof junction box, tee, bends, inspection bends etc all as required includingPVC insulated unsheated flexible copper conductor cable 4.0 Sqmm (nominal area) single core 1100 volts grade as earth continuity conductor completeall as specified and as directed. 63 S&F switch flame proof,zone I & II, Gas Group II A/ II B,weather proof rotary type with termination box in LM6 16A single pole 250 V complete all as specified and directecompleteall as specified and as directed. 64 Supply and fixing flame proof,zone I & II, Gas Group II A/ II B, weather proof switch socket and plug combined in LM6 16A, 240 V, 2 pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 aluminium alloy/cast iron neoprene gasket degree of protection IP 65 certified by CMRI complete all as specified and directedcompleteall as specified and as directed. 65 Supply and fixing flame proof,zone I & II, Gas Group II A/ II B, weather proof switch socket and plug combined in LM6 25A, 240 V, 2 pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 aluminium alloy/cast iron neoprene gasket degree of protection IP 65 certified by CMRIcompleteall as specified and as directed. 66 Supply and fixing LED wall light fitting 1x16 watts,flame proof,CMRI certified recommended for gas/vapour group ofII A/ II B,Zone 1&2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixture driver,holders,connectors etc. complete with all accessories prewired and incl connected up with three core flexible copper conductor cablecompleteall as specified and as directed. 67 Supply and fixing LED Suspended light fitting 1x16 watts,flame proof,CMRI certified recommended for gas/vapour group ofII A/ II B,Zone 1&2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixture driver,holders,connectors etc. complete with all accessories prewired and incl connected up with three core flexible copper conductor cablecompleteall as specified and as directed. 68 Supply and fixing flame proof,zone I & II, Gas Group II A/ II B, weather proof switch socket and plug combined in LM6 16A, 415V,3 Phase, 3 pin incl plug fully interlocked suitable for installation in hazardous as per IS-2147/62 aluminium alloy/cast iron neoprene gasket degree of protection IP 65 certified by CMRIcompleteall as specified and as directed. 69 Supply and fixing flame proof,zone I & II, Gas Group II A/ II B, weather proof switch socket and plug combined in LM6 25A, 415V,3 Phase, 3 pin incl plug fully interlocked suitable for installation in hazardous as per IS-2147/62 aluminium alloy/cast iron neoprene gasket degree of protection IP 65 certified by CMRIcompleteall as specified and as directed. 70 Supply and fixing flame proof,zone I & II, Gas Group II A/ II B, weather proof DB TBN 415 volts 8 way with busbar in cast aluminium LM-6 enclosure operated externally spring type knob complete with suitable incoming and outgoing cable enries with cable glands suitable for hazardous area and confirming to IS-2147/62 neoprene gasket degree of protection IP 65 suitable for MCCB TPN 160 Amps -1 Nos (incoming) and MCB TPN 32 Amps-03 Nos (out going) MCB TPN 63 Amps-01 Nos (out going), complete all as specified and directed. 71 Supply and fixing flame proof,zone I & II, Gas Group II A/ II B, weather proof DB TBN 230 volts 8 way with busbar in cast aluminium LM-6 enclosure operated externally spring type knob complete with suitable incoming and outgoing cable enries with cable glands suitable for hazardous area and confirming to IS-2147/62 neoprene gasket degree of protection IP 65 suitable for MCB TPN 40 Amps -1 Nos (incoming) and MCB SP 6-10 Amps-06 Nos (out going) MCB TPN 63 Amps-01 Nos (out going), complete all as specified and directed. 72 Supply and fixing flame proof ceiling fan of size 1200 mm sweep complete with regulator, electric driven suitable for operation on single phase, 230 V AC complete all as specified and directed. 73 EXTERNAL ELECTRIFICATION 74 Supply, Installation, commissioning and testing oftransformer (step down ) 11 KV / 433 Volts (as per IS 1180 Part-I 2014 and BEE certified Level 2)Outdoor type copper wound suitable for AC. three phase, 4 wire. 50 Hz system of capacity 250 KVA , oil immersed having Vector group DYN 11 naturally cooled type complete with and including provn of first filling of transformer oil, Delta connection on HT side, star connection on LT side, manually operated. off-load tap changer on HT side to varysecondary voltage to+7.5% in steps of 2.5% each, cable end box at LT side. LT side cable box shall be fitted with suitable size of cable glands for making connection for all the accessories and the under mentioned fittings, all as specified and directed by GE (A) Rating plate and terminal making plate.( B). two earthing terminals for body earthing and two additional for neutral brought out on a bushing (C) Lifting lugs (D) Drain valve with plug or cover plate (E) Dehydrating breather (F) Oil level indicator with minimum and maximum marking (G) Cooling Radiator 75 (H) Thermometer pocket (I) Conservater (J) Oil filling hole with cover (K) Thermometer 100mm dia/stem type with metal guard having maximum temperature indication with resetting as directed by the GE (A) Any other fittings as recommended by the manufacturer for efficient functioning of the transformer.Note :- (i) The fitting & accessories of the transformers shall be conforming to IS 3639 :1996(ii) The transformer shall be installed on a plateform / foundation as per manufacturers designand cost of the same shall be deemed to be included in unit rate (iii) The transformer shall be tested as per IS for all routine tests. in the factory premises, in the presence of Rep of Acepting Office (who will be detailed by the Accepting Officer on the receipt of request from the contractor before dispatch of the transformer) 76 Supply Installing testing and commissioning of HT 11 KV panel 3 phase 50 Hz 3 wire totally enclosed meta! clad re-wire extendable type indoor floor mounted horizontal draw out horizontal isolation type Vaccume Circuit Breaker (VCB) of capacity 400 Amps motor operated spring charged having rupturing capacity of 250 MVA and consists cf the following specifications. (a) . 400 Amps continuous rated electrolytic copper bus bars, droppers and bus bars should be insulaied with full system voltage sleeves of approved make (b) Truck /Trolly mounted vaccume curcuit breaker as per IEC 62271-200 VCB should have three non resin encapsulated vaccum bottle of approved manufacturer.( c) Motorized spring charging mechanism with integral spring crarging handle for manual spring charge (d) NO lnterpanel epoxy barriers required to restrict arc propagation from one panel io other (e). Cast resin current transformer 11 KV 100-50/5-5A. Cl 1 0 and 5P10, 15VA (f) Cast resin potential transformer 11KV/V3/110V/110VA: C! 1, 0, Cl 3P and HT fuse at the primary end and.04 Pole MCB at the secondry end of the PT. 77 (g). Accessories like local remote switch. breaker control switch (T-N-C), space heater with thermostat. DC & AC control circuit through MCB, indicating lamps for RYB, spring charge DC supply healthy, breaker ON/OFF breaker in SERVICE/TEST as per manufacturer (h) Multi function meter with port Medel no EM6400 cf CONSERV make or equivalent L&T make(j) Comprehensive numerical protection relay as per !EC 61850 compatible for directional and non directional O/C, E/F, U/V, O/V protection. Breaker should Have following additional facilitiesa) Trip circuit supervision b) Disturbance recorderc).Eventlog with date and timed) Measurement and control feature e)Panel should also rave additional facility like a) Intermitrant rated closing and tripping coil b) Fully internal arc type tested (25 KA for 1 sec as per latest IEC- 62271-200.c). Vaccum bottles should be epoxy encapsulated. d). Racking in/out manual closrng/tripping of CB with compartment door closed. Note :- Panel, breaker relay & vaccum interruptor shall be same make.NOTES:- - (i) Drawing for HT Panel shall be approved by GE before placement of order (ii) Cost of any addition/Altn requiree for fixing of Breakeris included in overall cost quoted by contractor(iii) The rate quoted shall be deemed to be included in the cost of provn of 24 Volt DC Power Pack for the relays. (iv) any type of civil work required is included in overall cost quoted by contractor. 78 Supply installation testing and commissioning of main LT panel lndoor type IP-42 approvedrnake powder coated suitable for 3 Phase 415 volt, dust, weather and vermin proof made out 2mm thick CRCA sheet aluminium bus bar 500 Amp TPN incl provision of cable entries with glands locking arrangementsandangle iron frame and legs 90cm long using 60x60x6mm size MS angle iron fixed in floor in PCC 1:4:8 type D2, base of appropriate size including necessary excavation ear!h work complete with following arrangement(a) INCOMING:- (i) MCCB 315 Amp.4 pole 5OKA- 01 No(ii) Volt Meter Digital type with selector switch 0-500 Volt(iii) Ampere Meter Digital type with selector switch 0-350 A(iv) RYB Phase indicating LED lamp- 03 Nos(b) OUTGOING .- (i) MCCB 4 pole 250 Amp 25 KA - 01No (ii) MCCB 4 pole 200 Amp 16 KA - 01No (iii) MCCB 4 pole 40 Amp 16 KA - 01No 79 Supply installation testing and commissioning of main LT panel outdoor type CPRI approved powder coated suitable for 3 Phase 415 voit dust weather and vermin proof made out of 3.15mm thick CRCA sheet aluminium bus bar 400 Amp TPN incl provision of cable entries with glands locking arrangementsandangle iron frame and legs 90cm long using 60x60x6mm size MS angle iron fixed in floor in PCC 1:4:8 type D2, base of appropriate size including necessary excavation ear!h work complete with following arrangement(a) INCOMING:-(i) MCCB 4 pole 250 Amp 35 KA - 01No(ii) Volt Meter Digita! type with selector switch 0-500 Volt(iii) Ampere Meter Digital type with selector switch 0-300 A(iv) RYB Phase indicating LED lamp- 03 Nos(b) OUTGOING .- (i) MCCB 4 pole 200 Amp 25 KA - 01No (ii) MCCB 4 pole 63 Amp 16 KA - 02No 80 Material and labour for Boring holes under road / pavement/ hard standing by trenchless technology using ultrasound technique and necessary machine for inserting and including 80mm/100mm dia bore double wall hose pipe compleie all as specified and as directed. 81 Supply and fix pole mounted terminal box of size 310x210x120mm(In side dimesion) including MCB SP 6 Amps, 4 Nos aluminium bus bar of 25mmx3mm thick fixed on porcelain post insulators with hinged cover and locking arrangement fixed to electric pole by means of MS flat iron 25mm x 6mm bolts and nuts complete all as specified and as directed. (Terminal box shall be IP 66 protection). 82 Supply and fixing roadway LED light in versatile pressure die cast aluminium road way luminare with high power LED with IP-66 Protection of 120 Watt capacity including fixing arrangemen clamps, bolts, nuts and brackets etc complete all as specified and as directed. 83 Supply and laying 2.5 Sqmm 3 core PVC unsheathed copper conductor PVC insulated cable drawn along steel pole for connection to streetlight fittings complete all as specified and as directed 84 Supply and fixing security LED light in versatile pressure die cast aluminium road way luminare with high power LED with IP-66 Protection of 45 Watt capacity including fixing arrangements clamps, bolts, nuts and brackets etc complete all as specified and as directed. 85 Supply and fixing. cable route marker for HT cable duly engraved (HT 11 KV cable) on 150mm dia MS round plate, duly painted with brown colour paint and fixed on MS angle of size 40mmx40mmx5mm with nuts and bolts and embedded in PCC (1:2:4) concrete block of size 230mm x 230mmx150mm complete all as specified and as directed. 86 Supply and fix LED post top lantern 25 W input voltage 230 volt 50 Hz with die cast aluminium spigot & prismatic diffuser, IP 66 protection class including fixing arrangement like suitable clamps nut bolts and washers and connecting up with suitable size of copper conductor cable complete all as specified and as directed. 87 STANDBY POWER SUPPLY 88 Supply, installation, testing & commissioningof factoryassembled & coupled silent Diesel engine generating set. AC, complete to give an out put of 250 KVA (200KW) at 415 volt, 50 cycle per second 3 phase, 4 wire supply with power factor 0.8 diesel engine as per IS 10001/10002 and alternatoras per IS 13364 and dully mounted on common base, frame complete with relay panel and switch gear for automatic starting on main failure control panel along with by pass arrangement with cabling system and including having meter and sound proof canopy as per CPCB norm and foundation work, fuel tank including accessories and components as specified below :-(a) Diesel driven Engine 250 KVA with multi cylinder, vertical, 4 stroke cycle,water cooled, diesel engine of approved make suitable to develop matching at 1500 RPM as per IS- 10001/10002. capable of taking10% over load for one hour in any12hrsrunning complete with and including following accessories :- 89 (i) Heavy duty fly wheel and fly wheel housing complete with starting gear ring and to suit flexible coupling duly covered with mud guard(ii) Air cleaner(iii) radiator with cooling fan and guage(iv) Fuel injector pump(v) water temperature guage(vi) Fuel filter(vii) Microprocessor automatic controlled governor(viii) Complete set of batteries with lead & lugs asrecommendedbymanufacturers(ix) Lubricant oil cooler(x) Lubricant oil pump(xi) Lubricant oil filter(xii) Oil pressure guage(xiii) Any other parts as prescribed by manufacturer for making it functional.(xiv) Dynamo of suitable capacity(xv) MS channel fabricated frame rigidly welded suitable for having the diesel engine and alternator and anti vibration pads(xvi) Coupling guard 90 (xvii) Exhaust pipe including residential silencer and necessary insulation.(xviii) Fuel tank for 10 hrs requirementat full load with inlet and outlet connection, filling cap,drain valve, air vent. (xix) Multi Function Meter(xx) Self starter of suitable size :(xxi) Integral-acoustic enclosure to control noise limit as specified by central pollution board & manufactured by company or authorised OEM of company. (xxii) Battery 12 volt as per OEM(d) Alternator 250 KVA at 0.8 PF vvith self excited self regulated 3Phase, 50 Hz 415 volts, 1500 RPM 4 wire alternator.screen protected drip proof free frorn commutation problem continuous rating as per IS-13364 complete with microroprocessor controlled automatic voltage regulator output voltage regulated between 1% of set volts from NO load to full load. (xxiii) DG Set control Panel with multifunction / digital meter for monitoring Engine RPM, Engine Temp, Oil Pressure, Hrs Run, KW, KWH, KVA, PF, Line Load 3Φ line to line, load line (RYB) to Neutral, voltage 3Φ line to line voltage 1Φ line (RYB) to Neutral DG set Panel should have the safety, indicator and audio alarm for High / Low oil pressure, High engine temperature, Engine over speed, low frequency, low fuel level. 91 (c)PCC foundation of suIiable size as recommened by OEM.Note :- Necessary excavation & earth work, sand cushioning grouting foundation etc deemed to be included In the unit rate(d) Manufacturers maintenance & operation manual of Gen set-01 set to be supplied(e) AMF panel factory made cubical automatic mains failure panel suitable for 250 KVA DG set made of 2mm thick CRCA sheet powder coated paintingcomplete with having relay panel and switch gear for automatic startng on main failurecontrol panel along with by pass arrangement with cabling system and suitable rated bus internal wiringprovn for connection ofXLPE, UG cable as IncomIng and outgoing angle iron base with & including following accessoriesti) Mas!er switch fer automanual / reset / off- 01 92 (ii) Volt meter dIgital type .(iii) Ammeter digital type with CTs -01 No(iv) Frequency meter digital type-01 No(v)Set of relays and conectors with and including incoming and out going 02 Nos MCCB 400Amps 4 pole 50 KA adjustable type movable thermostate for automatic start and automaticshutdownDG set - 01 (f) Push button start, stop and reset-01 No(g) Set of lamp for indicating load on set, low oil pressure, high cylender temperature load on mains sets fails to start.(h) Bty charger with suitable wiring and Bty charging indicator, DC volt meter 93 LIGHTENING PROTECCTION 94 M&L for copper round block size of 25mm dia x 50mm long having out side thread at one end to be fixed on the top of GI socket & inner thread 12mm for air termination, suitable arrangement for fixing the copper strip complete all as specified and as directed by Engr-in-Charge. 95 Supplyandfjxingcopperstaticdischarge plateconnectedtocommonearth complete all as speccified 30 cm x 30 cm including human body voltage check meter connected to common earth complete all as specified and as directed. 96 MISC EXTERNALWATER SUPPLY (Rate against each itemto be quoted by the bidder) 97 Supply , laying, testing and jointing, Ductile iron pipe of size 100 mm bore ISI mark class K 9, with flanged ends type, centrifugally cast, in any length,laid in trenches / path / duct / road/ wall etc including fixingwith connectedCl/DI/GIfittingaccessories and along with existing branch pipeline connections and its fitting worketc complete all as specified and as directed. Note- (Earthwork, fitting and joints shall be measured and paid for separately under respective items) 98 Supply , laying, testing and jointing, Ductile iron pipe of size 150 mm bore ISI mark class K 9, with flanged ends type, centrifugally cast, in any length,laid in trenches / path / duct / road/ wall etc including fixingwith connectedCl/DI/GIfittingaccessories and along with existing branch pipeline connections and its fitting worketc complete all as specified and as directed. Note- (Earthwork, fitting and joints shall be measured and paid for separately under respective items) 99 Supply , laying, testing and jointing, Ductile iron pipe of size 150 mm bore ISi mark class K 9, with spigot and socketed ends,centrifugally cast, conforming to ISI mark including titen joints, laid in trenches / path / duct / road/ wall etc including fixingwith connectedCl/DI/GIfittingaccessories and along with existing branch pipeline connections and its fitting worketc complete all as specified and as directed. Note- (Earthwork & fittingshall be measured and paid for separately under respective items) 100 Supply and fixing in replacernent, of cast iron air release ball valve with having double chamber ball with gun metal working parts for air outlet system including duly fitted with suitable size of GI prpe attachment system of size upto 50 mm dia bore all as per existing sample / model complete inciuding providing of mild steel flange with rubber flange seat and nut bolt & fittings complete all as specified and as directed. 101 Supply, fixed and Jointing in position DI fittings suilable for socketed or flanged type pipe line system any type any size such as bends tapers, Tee pieces (single & double branch) any type and any angle/radius and straight connecting pieces etc, fittings duly fixed and laid in trenches or on surface, complete all as specified and as directed Note : Earthwork and Joints shall be measured and paid separately. 102 M&L for Construction ofbrick masonry valve pit chamber ofinternal size 900mmx900mmx1050mm with one brick thick brick masonary wall in cement mortor(1:4),PCC foundation 10cm thick (1:4:8) type D2 with rendering 15 mm thick internally and top surface,MS frame of angle iron 40x40x6mm and 3mm thick MS sheet cover with locking arrangement, hold fast, hinges including painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer and necessory excavation and earth work including dismantling of existing complete all as specified and as directed. 103 MISC AIR CONDITIONING AND REFRIGERATION (DESIGN AND BUILT BY THE CONTRACTOR) (Lump sum to be quoted by the bidder) 104 Design, Supply, Installation, Testing & Commissioning of water Cooled lnvertor scroll type Chilled water Central AC Plant of suitable capacity but mninimum 100 TR (2 x50 TR working and1x50 TRstandby) complete for entire test lab including preservation / de-preservation area.The bidder shall submit complete design of central AC plant along with heat load calculation capacity of pumps / motors, size of pipe, size of AC duct capacity of HWG, humidifire, cooling tower, AHU, expansion tank, LT panel, control cable, LT switchgear etc (alongwith technical data sheet and make) duly vetted by IIT/NIT for approval of accepting officer (through proper channel) before commencement of AC work, to achive desired· condition as per Annexure A of tender documents (duly signed by GE and users)and comprising of the following all as specified below and as directed. Note : Rates for Srl item No. 7.01 to Ser item No 7.94 of BOQ shall be included in Quoted rates. 105 Note :- (a) Contractor/ Bidderwill be responsiblefor performance guarantee of complete AC Plant to achieve the inside design conditions round the clock throughout the year with overall COP of the system not less than 3.(b) Rates quoted by the contractor shall include cost of labour, material, scaffolding, finishing as required with tools, plants.cartage, lift, taxes, tollage, octroi, royalties etc. All work shall be executed as per approved drawings . All materials shall be duly approved by GE before incorporation in the actual work. The plant shall interalia comprise the following :- 106 EQUIPMENT :- Water Cooled Chilling Machines Supply, Installation, Testing & Commissioning of 2 x50TR working and 1x50TR stand by water cooled Inverter scroll Chilling Machines fitted with hermetically sealed lnvertor scroll compressors, multi/single circuit chiller, water cooled shell & tube condenser, Microprocessor basedBMSCompitablecontrolpanel,suitableforR-407C/R-410aRefrigerant, Shell & Tube Insulated Evaporator, Expansion tank of suitable capacity Control Mechanism of actual Cooling capacity . 107 Scope of Supply(a) 3 No scroll compressor hermetic type complete with automatic capacity control, safety switches, forced feed lubrication system etc. as per specification. (b) 3 No:- Suitable capacity squirell cage induction motor with class F insulation suitable for operation on 415 volts, 50Hz, 3 ph, A.C. supply (c) 3 No. Microprocessor based starter suitable for compressor motor complete with ammeter & CTs, over load protection, under voltage protection, protection against phase reversal & independent single phase preventers etc. complete as required. 108 (d) 3 Set - Lubrication device consisting of automatic electric oil pump, oil cooler, oil strainer, automatic pressure regulating valve, oil heater, oil heater thermal switch etc. as per specifications.(e) 3 Set. - Matching Water Cooled condenser having Copper tube with Mechanically bonded aluminum fins.(f) 3 No. - Matching chiller for Chiller units.(g) 3 Lot- Refrigerant piping fittings, valves and accessories to interconnect compressor, condenser, chiller and expansion valve. 109 (h) 3 Set- Microprocessor based control panel complete with all safeties, controls and Touch screen display as per specifications.(i) 3 Lot- Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications.(j) 3 Lot- Suction line and chiller insulation with minimum 19mm thick polyvinyl nitril rubber insulation complete as required.(k) 3 Lot - MS Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti vibration pads/springs. 110 (I) 3 Lot- Initial/ first charge of refrigerant gas and compressor oil.(m) 3 Lot- RCC foundation for the chillers units as per manufacturers instruction with anti vibration pads complete.(o) Minimum flow rate for chiller - 27.59 CMH.(p) Minimum flow rate for condenser - 34.48 CMHNote:- (a) Next higher capacity of chiller machine may be supplied with out any extra cost to Govt. in case non availability of capacity as specified. 111 Supply, installation, testing and· commissioning of Automatic Condenser Tube Cleaning System complete with Control panel, Ball catcher, Pump, Pressure Gauge, LED indicators (1 control panel skid x 3 Nos Ball Catcher/ Ball Trap unit). The system should capable to accomodate three chillers from single skid/ system. The quoted price shall be inclusive of PLC programmable control box for auto operation of the system according to a pre-programmed logic. 112 Centrifugal mono block type chilled water pump set of suitable capacity (as per design) capable of delivering min. 125 USGPM of water each comprising of the following and complete all as : specified and as directed.(a) 3 Nos.- mono block type end suction pump with bronzeimpeller, SS Shaft, Cl body and mechanical seal with all accessories complete (02 working & 01 standby - Each of 50% cap)(b) 3No. - Suitable HP TEFC squirell cage induction motor with class F insulation 2900 rpm, operating on 415 volts, 3 phase, 50 Hz A.C. (02 working & 01 standby - Each of 50% cap).(c) Lot- Insulation of suitable thickness same as chilled water pipe line properly clamped to pump in two semi-circular sections as per specification. 113 (d)Lot- Mounting frame with Anti vibration pads.(e) Lot- RCC/PCC cement concrete foundation for the pump unit (2 working simultaneously & 1 standby-Each of 50% cap).Note:- The contractor shall provide the calculation for the discharge & head of pump along with design calculations after acceptance of tender. In case of deviation of head upto 40 Mtr no price adjustment shall be done. However beyond 40 Mtr of total head adjusted through a deviation order as applicable. 114 Centrifugal mono block type condenser water pump set of suitable capacity (as per design) capable of delivering min. 208 USGPM of water each comprising of the following and complete all as specified and as directed 115 (a) 3 Nos.- mono block type end suction pump with bronze impeller, SS Shaft.Cl body and mechanical seal with all accessories complete (02 working & 01 standby Each of 50% cap)(b) 3No. - Suitable HP TEFC squirell cage induction motor with class F insulation2900 rpm, operating on 415 volts, 3phase, 50 Hz A.C. supply (02 working & 01 standby - Each of 50% cap). (c) Lot- Mounting frame with Anti vibration pads.{d) Lot- RCC/PCC cement concrete foundation for the pump unit (2 working simultaneously & 1 standby- Each of 50% cap 116 Centrifugal mono block type hot water pump set for hotwater circulation (1 Working + 1 standby) of suitable capacity (as per design) for AC plant each comprising of the following and complete all as specified and as directed 117 (a) 2 Nos.- mono block type pump with bronze impeller, SS Shaft,CI body and mechanical seal with all accessories complete (1 working & 1 standby-Each of 50% cap). (b) 2 Nos. - Suitable HP TEFC squirell cage induction motor with class F insulation 2900 rpm , operating on 415 volts, 3 phase, 50 Hz A.C. supply (1 working & 1 standby-Each of 50% cap) (c) Lot- Mounting frame with Anti vibration pads.(d) Lot- RCC/PCC cement concrete foundation for the pump unit (1 working & 1 standby-Each of 50% cap). 118 AHUDoubleskinfloormounted typeairhandlingunitsofsuitablesize fabricated& assembledcomplete,madeof43mmthickpanelsconsistingofGI casingof thickness 0.8mm outside layer and 0.8mm inside layer, injected at factory by moulding machine with CFC free polyurethane foam (PUF) insulation of minimum density 42Kg/ M3 factory injected between them by injection moulding machine, completewith direct driven: plugfan ofrequiredstaticpressure.completewith blower section and filter section with filter of 10 micron at 90% efficiency, 8 RWD chilled water coil constructed out of copper tubes not less than 0.5mm thickness andaluminum fins, Suitable capacity TEFC drive squirrel cage induction motor 415 volts, 50 Hz , 3 ph , AC centrifugal access door etc. complete as per std. specification of suitable capacity. 119 (a) Coil of copper tube and aluminium construction.(b) Pre filter(MERV 6) in supply air stream.(c) Squirrel cage induction motors suitable for 415 volts, 50 Hz, AC supply meeting criteria as per ASHRAE standard 90.1-2007 and high efficiency(d) Fan belt drive package.(e) Vibration isolators. 120 (f) SS 304 drain Pan.(g) Drain pipe of suitable size.(h) Flexible duct 20 G .j) Necessary control arrangement to switch off the fan in case of fire, indicating lamp & all safety precaution in a powder coated GI enclosure with necessary power and control cable as required.Note:(i) The floor slope of AHU room shall be such that all condensate is made to drain to outside AHU room.(ii) The AHU should have space for humidifire. 121 PAN type humidifier of suitable capacity made of stainless steel sheet duly insulated and of suitable capacity to maintain RH as per annexure A alongwith all necessary accessories such as steel water tank with float valve, water make up, overflow and drain connection, transducer shall be interlocked with the float switch supplied with humidifier and humidistat & controls etc. complete with necessary supports by MS structural steel as required, hangers, clamps supports from walls, floors and ceiling with painting with one coat of primer and two coats of paint to MS work.all as specified and directed 122 HOT WATER GENERATOR (HWG)Electrically operated Hot Water generator of suitable capacity (as per design) made of 8mm MS sheet and dish end made of 10mm MS having 16 gauge stainless steel linning with heaters arranged in banks and controller and thermostat so that required qty of hot water is generated at 50°C with nominal variation, including 100mm thick rasin bonded fiber glass insulation of 24 KG /M3 density finished with 1.25mm thick aluminium sheet cladding including necessary electrical panel with automatic controls including inlet and outlet connections for water complete with pressure release valve,low levelcut-out,Auto-ventsight-glassallasper specifications, complete as required and approved (Degree of protection IP-52 with IS 2147) 123 Design, Supply, Installation, testing and commissioning of induced draft counter flow, vertical discharge type FRP cooling tower of suitable heat rejection capacity as per design or as per OEM recommendation having Minimum Water flow/tower 520 USGPM with ultra- voilet treated durable & high efficient PVC filling with integral louvers and drift eleminators, open pan suitable for water distribution complete with hot FRP water basin. fitted with spray nozzles or having self rotating sprinklers, statically & dynamically balanced axial flow type fan direct driven or driven through reduction gear box with TEFC induction motor fan motor with blade 1 Nos suitable for 415 Volt & supporting structure , suction screen, make up quick filling arrangement, over flow and drain connections with necessary valves and suitable inspection ladder , access arrangement for cooling tower interior, installed on MS girders of suitable size fixed in masonry foundations with cement concrete footing, second class brick work and cement mortar 1:6 along with all necessary accessories, basin fittings, anti vibration mountings etc. includingg LT cable for power supply etc. Note:- Next higher capacity of cooling tower will be supplied by contractor with out any extra cost to Govt. in case non availability of.capacity as specified. 124 ELECTRAL WORKS(i) The outgoing feeders as indicated in Schedule of works shall have suitable range of followings (except capacitor feeders).(ii) All Digital electronic MFM cum KWH meter provided shall equipped with three phase indicating lamps.(iii) 415/110 V suitable rating control transformer shall be provided for aux.control supply.(iv) Wiring with space heater, thermostat and control MCBs shall be provided for all vertical sections of main LT panel.(v) All incoming as well as outgoing ,feeders shall have pad locking facility.(vi) Suitable danger board shall be provided.(vii) MCB/ MCCBs should have minimum breaking capacity as follows:-(a) Less than 63 Amp -10 KA(b) 63 Amp to 125 Amp -16 KA(c) above 125 Amp upto 250 Amp -25 KA(d) above 250Amp upto 400 Amp -35 KA(e) above 400 Amp -50KA(f) 630 Amps and above - ACB will be provided in lieu of MCCB/MCB.(vii) All MCCBs shall be provided with front rotary handle and operating mechanism for door interlock with Pad locking of MCCBs handles in OFF position. 125 (viii) All hinged door shall be earthed through 2.5 sqmm tinned braided copper wire (ix ) Panels shall be powder coated with gray paint shade no. RAL-7032 of IS-5. (x) Minimum Degree of protection for following type of distribution panel enclosure shall be as per IS:60439.(xi) All motor feeders MCCBs shall be of motor duty (xii) Supporting/Base rigid steel framework.(xiii) TPN MCCBs shall mean 3 pole MCCBs with adequate size of neutral link.(xiv) Final rating & various parameter, in addition to the specified below shall be selected on the bases of ambient conditions at site, client specific requirements, requirement for the NOC from various statutory authorities, as per detail designed stage calculations.(xv) Each Panel incomers/outgoings shall be provided with suitable contacts/terminals to receive the Al. Conductor cables given in the latter section. 126 (xvi) All Panel shall be minimum IP-54 for indoor environment except for outdoor conditions those are mentioned separateyly(xvii) All MCCB shall be with lcu =lcs.(xviii) All ACB shall be with lcu=lcs=lcw.(xix) All ammeter/ voltmeter shall be of minimum 0.5 Cl accuracy.(xx) All starter of more than 5 HP motor shall be star-delta and rest Shall be of DOL type. 127 Design, manufacture, Supply, fixing, testing and commissioning main LT panel 01 No.Cubicle type floor mounted front operated Main HVAC and AHU electrical / control panels as per IEC 61439 for 3 phase, 415 volt, 4 wire 50Hz AC supply system, fabricated in compartmentalized design with CRCAsheet steel 2 mm thick for frame work and covers 3mm thick for gland platesincludingcleaningand surface treatment with 9 tank process before powder coating in approved shade, having suitable Amps capacity extensible type TPN Aluminium Alloy Bus Bars with suitable rating neutral of high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 35KA for 1sec, bottom base channel of MS section not less than 100mmx75mmx5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 32mmx5mm at the rear with 02 Nos. earth stud, solid connections from main bus bar to switch gears with required size of with earth bus, AL bus bars, numbering & powder coated, CPRI approved panel including interconnection wiring, indicating lamps etc· and with the under mentioned incoming & out going components complete. The cubicle panel shall be free floor standing type, complete. The panel shall have 128 Incoming :- (a) 1 No 4 pole MCCB of suitable cpacity with rotary handle with microprocessor based O/C, S/C & E/F release, of suitable capacityasperdesign rating for AC plant.(b) UV protection, OV protection,Single phasing, Phase reverse protection shall be in main incomer.(c) 1 NO Multifunction meter 96x96 mm with selector switches and suitable CTs.(d) Phase indicating lamps for Ph RYBwith control fuses as required(e) Breaker On/Off trip indication(f) 1 Set of suitable capacity rectangular section TP & N Aluminum Bus Bars with color coded PVC heat shrinkable sleeves.(g) 1 Set digital type 3 phase static KWH meter 3 phase 415 volts,CTs operated complete with CTs of appropriate ratio and VA burden Outgoings:-(a) Suitable Nos. TPN MCCB/ MCB, of suitable capacity as per design rating with adjustable thermal and magnetic setting, electrically operated as outgoing feeders for 3 Nos. chilling unit. 129 (b) Suitable Nos. FP MCCB of suitable capacity as per design rating with DOL / star delta starter for motor, over load relay with built in single phasing protection and outgoing feeder to chilled water, condenser water & HWG . The compartment shall contain an indicating lamp with MCB for ON status of pump motor.(c) Suitable Nos. FP MCCBs of suitable capacity as per design rating operated as out going feeder for CT fan motor panel.(d) Suitable Nos. FP MCCBs of suitable capacity as per design ratingoperated as out going feeder for AHU PanelNote :-Any other control/circuit bracket required for operation of plant shall be provided within quoted rate. 130 Design, manufacture, Supply, fixing, testing and commissioning of cubicle type wall mounted panel, dead front, fabricated form 2 mm thick CRCA sheet powder coated sheet steel CPRI approved panel including anchoring into the wall ( AHU panel.), lncoming:-(a) 1 No 4 pole MCCB with rotary handle with microprocessor based O/C, SIC & E/F release, of suitable capacity as per design rating for AHU panel.(b) UV protection,OV protection, Single phasing,Phase reverse protectionshall be in main Incomer..(c) 1 NO Multifunction meter 96x96 mm with selector switches and suitable CTs.(d) Phase indicating lamps for 3 Ph RYB with control fuses as required(e) Main MCCB On/Off trip indication(f) 1 Set of suitable capacity rectangular section TP & N Aluminum Bus Bars with color coded PVC heat shrinkable sleeves. 131 Outgoings:-(a) Suitable ( Qty) No FP MCCB of suitable capacity as per design rating with DOL / star-delta starter for AHU motor, over load relay with built in single phasing protection. The compartment shall contain lamp with MCCB for ON status for AHU motor.(b) Suitable (Qty) No TPN MCCB of suitable capacity as per design rating with starter for Pre Heater. The compartmentshall contain an indicating lamp with MCB for ON status of Heaters.(c) Suitable (Qty) No MCB TP , 10 KA for 3 Way Valve & Control system with toggle switch(d) Over load relay with built in single phasing protection as per rating , suitable for motor duty and able to withstand fault level of 20 KA.Note: - Any other control/circuit bracket required for operation of plant shall be provided within bore all quoted. 132 Design, manufacture, Supply, fixing, testing and commissioning of cubicle type wall mounted panel, dead front, fabricated form 2 mm thick CRCA sheet powder coated sheet steel CPRI approved panel including anchoring into the wall (CT fan motor panel.)Incoming:-(a) 1 No 4 pole MCCB with rotary handle with microprocessor based O/C, SIC & E/F release, of suitable capacity as per design rating for CT panel.(b) UV protection,OV protection, Single phasing, Phase reverse protectionshall be in main incomer.·(c) 1 NO Multifunction meter 96x96 mm with selector switches and suitable CTs.(d) Phase indicating lamps for 3 Ph RYB with control fuses as required(e) Main MCCB On/Off trip indication(f) 1 Set of suitable capacity rectangular section TP & N Aluminum Bus Bars with color coded heat shrinkable sleeves. 133 Outgoings:-(a) Suitable ( Qty) No TP MCCB of suitable capacity as per design rating with DOL / star-delta starter for Fan motor, over load relay with built in single phasing protection. The compartment shall contain lamp with MCCB for ON status for Fan motor.Note: - Any other control/circuit bracket required for operation of plant shall be provided within bore all quoted. 134 Design supply layin and fixing along the poles or passing through pipes or laid under floor or through walls etc jointing and testing (XLPE insulated) galvanised steel strip / wire armoured electric cable 1100 Volts grade, heavy duty, ISI marked, with Al / Cu conductor and overall served with an outer sheathed of PVC, of suitable cross section area and No of Core of required length (from main LT Panel) complete all as specified and as directed for following :- 135 For Chiller / HWG / Pumps (Copper conductor cable) 136 For AHU sub panel / CT fan motor sub Panels (Aluminium conductor cable) 137 Supply layin and fixing along the poles or passing through pipes or laid under floor or through walls etc jointing and testing PVC insulated flexible electric cable 1100 Volts grade heavy duty ISI marked with Al / Cu conductor and overall served with an outer sheathed of PVC, of followingcross sectional areacomplete all as specified and as directed for following :- 138 For control 3c x 1.5 Sqmm (copper) Note:-Cable, Wire & End terminations :- Following are deemed to be incluted in item rate quoted(i) Cables be laid on cable tray / surface / in duct / trench, including clamps, ties, excavation work etc as required and specified. (ii) End termination with brass compression gland and aluminium lugs for various sizes of PVC insulated and PVC sheathed XLPE aluminium conductor cable of 1.1 KV grade as required and specified. 139 (iii) Providing and fixing of control wiring/ power cabling with various sizes of copper conductor armoured cable making connection etc as required and specified.(iv) Providing and fixing 25x5mm size GI strip for earthing. (v) Fabricating and installing of desired sizes of hot dip galvanised ladder type cable trays including horizontal vertical bends, reducers tees,cross memebers and other acessories as required and duly installed from the ceiling/ side walls with suitable size of channels/ angles with anti corrosive painting, full threaded GI rods etc. complete as required & approved by Engr-in Charge.(vi) Any earth work and protection cover sand cushioning etc required to lay the cable in trenches are deemed to be included in the quoted rate. Earth work for cable be done as per specified standard manner. 140 Suitable quantity of Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground (Earth pit not less than 2.25 m deep below normal ground level) surrounded from all directions with charcoal dust, salt and edge of earth plate not less than 1.5 m below ground level connected to galvanized iron strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers made of glavanized iron and protected by galvanized iron pipe light grade 40 mm bore and watering pipe 20mm dia 141 medium grade with funnel and wire mesh as specified and connected all as shown in electrical plate No 3 of SSR Part I including necessary earth work and excavation in any type of soil and PCC 1:2:4 type B-1 in chamberand 80 mm thick precast RCC 1:2:4 type B-1 using XPM weighing not less than 4Kg/Sqm for cover slab/coping complete all as specified and as directed. 142 Note: (i) The unit rate quoted by tendrer is deemed to be include for necessary excavation, removal of surplus soil, PCC foundation, MS Iron Cover Etc.(ii) All panels ( Main and sub panels) be connected minimum with one pair (two nos) of separate earthing for each.(iii) All Chiller motors be connected minimum with one pair (two nos) of seperate earthing.(iv) All other electric motors/ euipments be connected with loop earthing from connected panel with suitable earth conductor of minimum size GI strip 25x3mm .(v) All terminations shall be made with proper lugs in the approved manner. 143 Suitable nominal sizes as per design / OEM recommendation of chilled plumbing pipes MS C CLASS as per IS: 1239, inside/outside the building (with necessary clamps, vibration isolators and fitting like elbow,flanges, union etc. but excluding valves, strainers, gauges etc.) cut to required lengths and welded at joints .Chilled water pipe shall be insulated with closed cell Nitrile Rubber insulation of density 40-42 Kg/cum. The thermal conductivity of the material should not exceed 0.035 W/Mk at an average temp of 40 deg C. Nitrile insulation shall be apllied after pressure testing of pipe line and shall be fixed with OEM recomended Rubber based adhesive. The chilled water pipe line shall be finally wrapped with 7 milli fiber glass cloth and finally apply two coat of UV paint.matching with building colour or as per Engr-in-charge decision.Note : (i) The pipes of sizes 150mm & below shall be MS C class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS:3589 from minimum 6.35mm thick MS sheet for pipes upto 350mm dia and from minimum 7mm thick MS Sheet for pipes of 400mm dia and above. Minimum thickness of insulation for pipes should not be less than given below :-. 144 125 mm dia Pipe (25 mm thick Insulation) 145 100 mm dia Pipe (25 mm thick Insulation) 146 80 mm dia Pipe (19 mm thick Insulation) 147 65 mm dia Pipe (19 mm thick Insulation) 148 50 mm dia Pipe (19 mm thick Insulation) 149 40 mm dia Pipe (19 mm thick Insulation) 150 32 mm dia Pipe (13 mm thick Insulation) 151 20 mm dia Pipe (13 mm thick Insulation) 152 Valves strainers, Gauges etc(Qty and size as per design requirement) in chilled/hot water plumbing duly insultaed to the same specification as the connected piping and adequately supported as required. 153 Butter Fly Valves (Manual) (Qty and size as per design requirement) with CI body Stainless steel disc, nitrile rubber seal & O ring, minimum PN 10 Pressure rating for chilled water circulation of suitable size. Valves shall be insulation with the same as per pipe line insulation material 154 Balancing valve, globe type, (Qty and size as per design requirement) Minimum PN 16 rated, balanced/high rangeability control valve duly insulated to the same specifications as the connected piping as per following specificationNominal Pressure PN16Medium Temperature: AS per design condition.Body Mateial: IS:210, FG 220 CIStem Material: ASTM A276,Disc Material: Stainless steel discHand Wheel:Cast IronLeakage Rate: No visible leakageMedium Type: Water 155 Y-type strainer,(Qty and size as per design requirement) with Cl/MS body, bolted cover, flanged ends, basket of brass/ bronze/ SS wire mesh complete with flanges, nuts-bolts, gaskets and flange drilling standard end connection with accessories etc, as required all as specified. 156 Non return valve of suitable size, qty and placed at location as per design, with dual plate of CI body , stainless steel plates, vulcanised NBR seal flanged ends and minimum PN 10 Pressure rating, all as specified. 157 Gun metal Ball Valve set,of stuiable size, qty and placed at locaiton as per design with and without Y strainer with bronze body, flanged end type for chilled/hot water circulation all as specified. 158 Three Way modulation valve ( Qty and size as per design requirement) with spring return function & fitting with modulating actuators controlled by electronic controller in chilled water lines at each air handling unit. The actuator shall have required shut off capability of minimum 4 bar rating. The valve shall be suitable size as per design size and duly insulated to the same specification as the connected pipe all as specified and as directed. 159 Automatic air-vent ( Qty and size as per design requirement) with Brass OT 58 body and cover, polyacetal lever, high density expanded polyethylene float, EPDM rubber plug, stainless steel spring, polyamide capm etc. suitable for minimum operating pressure of 10 bar and minimum operating temperature 115° C respectively, installed on all high points in the water piping system and as per design requirement to automatically remove the trapped air, installed on all high points in the water piping system to automatically remove the trapped air etc. as required all as specified and as directed. 160 Industrial type pressure gauge 100mm size ( Qty and size as per design requirement) with gun metal / brass construction isolating valve complete with all accessories as required. 161 Mercury-in-glass industrial type thermometers, qty and size as per design requirement, with gun metal / brass construction isolating valve complete with all accessories as required. 162 Water flow switches brass / polymer construction, qty and size as per design requirement for water circuit complete with fittings, all as specified and directed 163 Proportional cooling only thermostats, qty and size as per design requirement, for the Air Handling Units complete with required controls wiring/installation kit etc.as per design and as specified. 164 Proportional Heating only thermostats, qty and size as per design requirement, for the Air Handling/FCU Units complete with required controls wiring/installation kit etc. as per design and as specified. 165 Proportional humidistate for the Air Handling Units, qty and size as per design requirement, complete with required controls wiring/installation kit etc. as per designed drawings and as specified. 166 Suitable Nominal sizes, qty and size as per design / OEM recommendation of condenser water pipes MS C CLASS as per IS: 1239, along with necessary clamps, vibration isolators and fittings such as bends, tees etc but excluding strainer and gauges etc adequately supported on rigid supports/buried in ground including excavation & returning and filling etc complete all as specified and directed. 167 Butter Fly Valves (Manual) with Cl body, qty and size as per design, Stainless steel disc, nitrile rubber seal & O ring, minimum PN 10 Pressure rating for chilled water circulation . Valves shall be insulation with the same as per pipe line insulation material 168 Y-type strainer, qty and size as per design with Cl/MS body, bolted cover, flanged ends, basket of brass/ bronze/ SS wire mesh complete with flanges, nuts-bolts, gaskets and flange drilling standard end connection with accessories etc, as required all as specified and directed 169 MS/Cl POT strainers, qty and size as per design and as per drawing, including packing material, fixing bolts etc and any alterations required for proper fixing all as specified and directed. 170 Gun metal Ball Valve set, qty and size as per design all as specified. 171 GI class B pipe of suitable size as per design and drawing for cable protection & water supply connection of cooling tower, tank etc 172 GI pipes for Drain pipes, laid qty as per design and approved drawing medieum class as per IS: 1239, inside/outside the building (with necessary clamps, vibration isolators and fitting like elbow,flanges, union etc. but excluding valves, strainers, gauges etc.) cut to required lengths adequtely supported and duly insulated with 13mm thick closed cell elastomeric nitrile rubber of classO insulation applied by adhesive confirming to standard specifications complete with type 3, grade 1 roofing felt strip (as per IS;1322 as ammended upto date) at joints. 173 Auto Air purge valve of brass construction of qty and size as per design and approved drawing. ( Air vent will be fitted with an isolating ball valve- gun metal/ brass construction. 174 Flexible connections Flexible connector for pipe of required size and qty as per design and approved drawing having min 16 PN working pressure with anti vaccum rings complete with flanges, nuts, bolts, seal etc to be installes at chiller section anddischarge. 175 Motorised combined fire damper of desiged size complete with control panel, inter connecting wiring at location shown in approved drawing all as specified and directed. 176 Duct insulation in AC/Attic space outside building with aluminium foil backed minimum 25mm thick closed cell chemically cross linked fire retardant polyethylene foam insulation of minimum density 32 Kg/cum. The thermal conductivity of the material should not exceed 0.035 W/Mk at an average temp of 40 deg C, complete with application with rubber based adhesive as per OEM recomandation including making good the damages to match with the existing specification of the building, complete all as specified and direcetd. 177 Acoustic insulation of duct as shown on approved designed drawing with minimum 25 mm resin bonded fibre glass, of min 48 kg/cum density, covered with and 28 Gauge Aluminium perforated sheet all as specified and directed. 178 Under deck insulation of the exposed portion of the roof/wall of AHU Rooms to be air conditioned with min 13 mm thick closed cell chemically cross linked fire retardant polyethylene foam insulation of min density 30 Kg/cum and covered with aluminium foil complete with application with rubber based adhesive as per OEM recomandations all as specified. The thermal conductivity of the material should not exceed 0.035 W/MK at an average temp of 40 deg C, complete · all as specified including making good the damages to match with the exisiting specification of the building 179 Design, supplying, installing, balancing, testing and commissioning of factory/ Site fabricated Galvanized steel sheet, rectangular ducting, qty and specifications as per design and approved drawing, complete with neoprene rubber gaskets, elbows, splitter damper vanes, hangars, supports as per SMACNA in accordance with design and approved shop drawings and as per desined specifications Note for Duct(i) The contarctor shall submit the shop drawings of ducting layout for the approval of GE before execution of work.(ii) The duct work shall be as per IS-655(iii). The Galvanized steel sheet for duct work shall conform to class viii with zinc coating of 120 gm/sq mtr as per IS-277(2003). 180 Flexible connection constructed of fire resistant double resin sleeve as per approved shop drawings and specifications, complete all as specified and directed. 181 Powder coated aluminium grill/Diffuser with volume control dampers, qty and specifications as per design and approved drawing, complete all as specified and directed. 182 Jet diffuser with volume control dampers for supply air , qty and specifications as per design and approved drawing, complete all as specified and directed. 183 GI volume control dampers, qty and specifications as per design and approved drawing, complete all as specified and directed. 184 Powder coated extruded aluminium section fresh air grill, qty, size and specifications as per design and approved drawing, in weather maker room with volume control dampers, bird screen etc all as specified and directed 185 HOPE make up tank qty and size as per design and approved drawing of minimum size 500 Ltr. on the roof of plant room with air vent and drain connection & overflow, mak up, qqnnection with float valve etc as required all as specified and directed 186 HOPE expansion tank as per design requirement of minimum size 1000 Ltrs complete with suitable FR-XLPE/XPE min 13 mm thick, of minimum bulk density 28 + 4Kg/cum covered with vapour barrier and finished with min 0.5mm thick aluminium cladding applied with rubber based adhesive recomanded by OEM complete with air vent and drain connection float valve, quick fill and control valves etc as required all as specified and directed. 187 SITC of MS Powder coated perforated cable tray on wall , roof etcshall be of minimum 1.6 mm thickness,qty and size as per design and approved drawings 188 Design , manufacture, supply, fixing, testing and commissioning of cubicle type wall mountd panel, dead front, fabircated from 2mm thick CRCA sheet powder coated sheet CPRI approved panel including anchoring into the wall (AHU Panel) Incoming: (a) 1 No 4 Pole MCCB with rotary handle wiht microprocessor based O/C, S/C & E/F release, of suiatable capacity as per design rating for AHU panel. (b) UV protection, OV protection, single phasing, phase reverse protection shall be in main incomer. (c) 1 No multifunction meter 96x96 mm with slector switches and suitable CTs (d) Phase indicating lamps for 3 ph RYB with control fuses as required (e) Main MCCB on/off trip indiction (f) 1 set of suitable capacity rectangular section TP & N aluminium bus bars with color coded PVC heat shrinkable sleeves.Outgoings:-(a) Suitable (Qty ) No FP MCCB of suitable cpacity as per design rating with DOL/Star-delta starter for AHU motor, over load relay with built in single phasing protection.The compartment shall contain lamp with MCCB for ON status for AHU motor. (b) Suitable (Qty) No TPN MCCB of suitable capacity as per design rating with starter for Pre Heater.The compartment shall contain in indicating lamp with MCB for ON status of heaters (c) Suitable (Qty No MCCB TP, 10 KA for 3 way valve & control system with toggle switch (d) Over load relay with built in single phasing protection as per rating, suitable for motor duty and able to withstand fault level of 20 KA. Note: Any other control/circuit bracket required for operation for plant shall be provided within bore all quoted. 189 GI pipes for Drain pipes, laid qty as per design and approved drawing medieum class as per IS: 1239, inside/outside the building (with necessary clamps, vibration isolators and fitting like elbow,flanges, union etc. but excluding valves, strainers, gauges etc) cut to required lengths adequtely supported and duly insulated with 13mm thick closed cell elastomeric nitrile rubber of class O insulation aplied by adhesive confirming to standard specifications complete with type 3, grade 1 roofing felt strip (as pe IS : 1322 as ammended upto date) at joints. 190 Auto Air purge valve of brass construction of qty and size as per design and approved drawing. ( Air vent will be fitted with an isolating ball valve- gun metal/ brass construction. 191 Flexible connection: Flexible connector for pipe of required size and qty as per design and approved drawing having min 16 PN working pressure with anti vaccum rings complete with flanges, nuts bolts, seal etc to be installes at chiller section and discharge. 192 Motorised combined fire damper of desiged size complete with control panel, inter connecting wiring at location shown in approved drawing all as specified and directed. 193 Duct insulation in AC/Attic space outside building with aluminium foil backed minimum 25mm thick closed cell chemically cross linked fire retardant polyethylene foam insulation of minimum density 32 Kg/cum. The thermal conductivity of the material should not exceed 0.035 W/Mk at an avererage temp of 40 deg C, complete with application with rubber based adhesive as per OEM recommendation including making good the damages to match with existing specification of the building, complete all as specified and directed. 194 Acoustic insulation of duct as shown on approved designed drawing with minimum 25 mm resin bonded fibre glass, of min 48 kg/cum density, covered with and 28 Gauge Aluminium perforated sheet all as specified and directed. 195 Under deck insulation of the exposed portion of the roof/wall of AHU Rooms to be air conditioned with min 13 mm thick closed cell chemically cross linked fire retardant polyethylene foam insulation of min density 30 Kg/cum and covered with aluminium foil complete with application with rubber based adhesive as pr OEM recommendations all as specified. The thermal conductivity of the material should not exceed 0.035 W/MK at an average temp of 40 deg C, complte all as specified including making good the damages to match win the existing specification of the building. 196 Suitable nominal size as per Design/OEM recommendation of Hot water plumbing pipes MS C class inside/outside the building as per item No. 7.40 to 7.48 here-in-above with necessary clamps etc including different type valves, strainers etc complete in all respect. 197 The contractor will operate the plant for 24 hours in three shifts, each shift of 8 hours after successful completion of Phase - I test until successful completion of first phase-II test. Rates quoted by the tenderer will be deemed to be included for this provision and no extra payment shall be admissible on this account 198 EOT CRANE 199 Design, Supply, installation in position, testing and commissioningof flame proof EOT crane double girder box type class II, indoor type for hazardous area Zone - 2 gas group IIA & IIB as per IS 2148 (latest edition) including other relevant applicable IS of 2 ton capacity with all motion ie. long travel cross travel and hoisting having hook height 4M electrically operated through pendant push button station floor operated type complete with and including main frame, bridge girders/ box girders ISMB / Beam, end carriage, trolly with frame, crab, buffers, gears with gears boxes, shafts, rope drum, rope shleeves, wire rope, wheel, lifting hook, brakes, motors, limit sweetches, control panel, pendant push botton station, wiring cables etc as per IS 3177, 807 & 2148 with following technical specification :- 200 (a) Capacity: 2 Ton (2000 Kg)(b) Overload capacity: 25%(c) Class duty : II Indoor type (d) Hook height: 4 M (e) Hoisting speed drive : 3M/Minut with VVVF drive (f) CT Speed10 M/Minut with VVVF drive (g) LT speed: 10M/Minut with VVVf drive (h) Operation from floor: Pendant push button (j) Hoisting motor: Qty & capacity as per CT motor & LT motor manufacturer design(k) Wire rope : Suitable dia as per manufacturer design with minimum 4 falls, tensile strength 180kg/Sqmm.(l) Main girder: Box type(m) Long travel span: 25M (n) Cross travel span: 14M(o) Brakes: Hoisting cross and long travel motions shall be provided with fall safe electro Hydraulics thrust or operated brakes.(p) Any unforeseen item required for complete operation of flame proof crane as specified by OEM. 201 All as per ser No 8.01 and 8.02 complete here in before but long travel span and cross travel span shall be as under :-Long travel span: 29MCross travel span: 14M 202 All as per ser No 8.01 and 8.02 complete here in before but long travel span and cross travel span shall be as under :-Long travel span: 25MCross travel span: 13M 203 Gantry Guirders made out of ISMB/ISMC for EOT crane as per OEM . Note for Ser item No 8.01, 8.03, & 8.04:- (i) Design & drawings of EOT crane shall be submitted to Accepting Officer for approval alonwith all type test report of flame proof EOT & their components / items of crane from Govt approved Lab before placement order by the contractor. (ii) Pre-dispatch factory inspection of flameproof EOT cranes shall be carried out by rep of Accepting Officer at manufacturers (OEM) premises within overall cost quoted by the contractor.(iii) For proper functioning of cranes, any unforseen items or any minor modifications requied to be carried out, shall be deemed to be included in quoted rate.(iv) Pre-commissioning test of cranes shall be carried out by rep of Accepting Officer. 204 DEMOLITION WORKS 205 Taking out of old unserviceable sluice valve / NRV with complete accessories from existing pipe line of size 80/100 mm boreincluding excavation work if any, complete all as specified and as directed. 206 Demolition of oldvalve pit any type any size complete and taken out of old broken unserviceable accessories from valve pit and its connection and fixing accessories including exavation work,complete all as specified and as directed.
Contract Date: Oct 15, 2025 Contract Value : ₹ 19.48 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Punjab View Result →
Jharkhand View Result →
36.
Public Administrative Department #7924578 AOC
Tender For Pr No 517 Town Square Sound System In Ward 10, 2024/25; 1.001 Electrovoice(EVC-1152-95PIB) :SITC of 15, high power, high sensitivity, 2-way Full Range point source loudspeaker. The speaker cabinet must have frequency range (-3dB) of 56 Hz –19 kHz, sensitivity (1W/1m) 98dB SPL or better, delivering Max SPL of 128 dB with power handling 300 W continuous & peak 1200W or better.Loudspeaker shall contains LF Transducer - 15 .HF Transducer - 3. Impedance: 8 Ω (nominal). The speaker cabinet should have a horizontal x vertical coverage pattern of 90° x 55° . The speaker should have M10 threaded suspension points and shall be fully weatherized with IP55 ratings or better.Approved Makes: Martin Audio / TW-Audio/ Electro-Voice 1.002 Dynacord (L3600FD): SITC of Dual channel class D/H Power amplifier with built in Audio Digital Signal Processor, a Maximum Output Power ≥ 900W@8 ohms, ≥1700W@4 Ohms for single channel operation;Max Bridged Output Power ≥ 6000W @ 4 ohms Frequency Response (+/- 1dB) ref. 1 KHz:10 Hz to 21 kH,Max input level:+21dBu,Crosstalk< - 80dB,input impedence:20kohm,signal to noise ratio >109 dB,with built in Digital Signal processor like - 31 Band Graphic Equalizer per channel, Parametric Equalizer per channel, Output delays, Audio Limitters, Audio Filters Approved Makes: Powersoft / Lab-gruppen / Dynacord 1.003 Electrovoice (PC Desktop-18) :Supply of Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,Height > 520 mm, sensitivity5.5mV/Pa,clipping level >125dB SPL ,output impendence 200 ohm, Dynamic Range > 100 dB.Approved Makes: Audio Technica, Senheiser, Electro-Voice 1.004 Sennheiser (e-835) :Supply of Corded Vocal Microphone with frequency response of 40Hz- 16kHz or better ,Cardioid polar pattern, rated impedence of 350 ohmApproved Makes: Audio Technica, Senheiser, Electro-Voice 1.005 Electrovoice (R300-HD-A) :Supply of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiverhaving 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHzApproved Makes: Audio Technica, Senheiser, Electro-Voice 1.006 Sonodyne (SMX 1116): SITC of 16 Channel Analog Mixer with USB and MP3 1.007 Belden/ Krystal: Supply and Laying of 2.5 Sqmm Speaker cable with Jacket 1.008 Belden/ Krystal: Supply and Laying of high quality mic cable 1.009 Neutrik/ Amphenol: Supply and termination of various audio interconnects and mounting arrangements for speaker as per site condition
Contract Date: Sep 10, 2025 Contract Value : ₹ 18.38 Lakh
Government Departments No of Bidders 3
Kerala View Result →
37.
Educational and Research Institute #7822828 AOC
Notice Inviting E-Tender For Procurement Of Equipment, Instrument, Machineries, Tools Glassware, Etc. For Sheikhpara A.R.M. Polytechnic. , Jaw Crusher : Utilities Required : •Electric Supply : Single Phase, 220 V Ac, 3 Kw. •Set Of Sieves With Sieve Shaker For Analysis. •Floor Area 1.5 X 1M Technical Details : •Jaw : Size 100 X 150Mm. •Feed Hopper: Suitable Capacity. •Feed Size : 50Mm ( Approx. ) •Product Discharge Size : 5Mm To 15Mm. •Drive : Electric Motor, 3 Hp, Single Phase, •Control Panel Comprises Of : •Energy Measurement: Electronic Energy Meter. •Starter: 3 Hp, Single Phase. • Mcb: For Overload Protection. • Instruction Manual : An English Instruction Manual Will Be Provided Along With The Apparatus •The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Filter Press: Utilities Required: •Electric Supply: Single Phase, 220 V Ac, 1.5 Kw. •Water Supply. •Drain. •Slurry Required To Performing Experiment. Technical Details: •No. Of Frame : 6 •No. Of Plates : 7 •Size: 200 Mm X 200 Mm. •Material : Acrylic •Screw Jack Arrangement For Tightening And Removing Of Frames Easily. •Filter Medium : Filter Cloth •Filtrate Collection Tray: Material Stainless Steel, Suitable Size. •Slurry Feed Tank : Material Stainless Steel, Capacity 40 Ltrs. •Slurry Tank Agitator : Stainless Steel Impeller With Ss Shaft Coupled To Fhp Motor And Reduction Gear Box •Slurry Feed Pump : Gear Pump With Fhp Motor. •Piping System: Gi And Pvc. •Filtration Rate Measurement: Using Measuring Tank. Material Stainless Steel Pressure Measurement: Bourdon Type Pressure Gauge. •Overhead Water Tank: Material Stainless Steel, Capacity 25 Ltrs. •Control Panel Comprises Of Standard Make On / Off Switch, Mains Indicator Etc. •Instruction Manual : An English Instruction Manual Will Be Provided Along With The Apparatus •A Good Quality Painted Rigid Ms Structure Is Provided To Support All The Parts Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Ball Mill With Three Prefixed Speeds: Experimentation: • To Study Effect Of Rpm On The Power Consumption Of A Ball Mill. •To Determine The Efficiency Of A Ball Mill For Grinding A Material Of Known Wi. Utility Required : •Raw Material For Feed. •Electric Supply : Single Phase, 220 V Ac, 1 Kw. •Set Of Sieves With Sieve Shaker For Analysis. •Floor Area 1.5 X 1M •Steel Balls Technical Details : •Ball Mill : Material Ms •Dia 275Mm, Length 350Mm. Thickness 5 Mm. •Discharge Chute : Suitable Size. •Feed Size : 6 Mm ( Approx ) . •Product Size : 200 Mesh ( Approx. ) •Drive : 1 H.P. Motor Coupled To Reduction Gearbox & 3 Step Pulley •Revolution Counter : Mechanical Type. •Product Receiver : Material Stainless Steel Of Suitable Size. •Control Panel Comprises Of : •Energy Measurement : Electronic Energy Meter. •Mcb : For Overload Protection. •Standard Make On / Off Switch, Mains Indicator Etc. •Instruction Manual : An English Instruction Manual Will Be Provided Along With The Apparatus. •The Set-Up Is Fitted With Required Guards. •The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: • Standard Make On / Off Switch, Mains Indicator Etc. , Motorized Sieve Shaker Machine With Sieve : •Type : Vibratory Sieve Shaker For Dry Sieving Material In The Range 4.75Mm–20?M. • Sieve Diameter : 20Cm • Number Of Sieves : Minimum 8 Sieves Of Depth 5Cm Approx. • Power Supply: Suitable For Operating On 220 V, 50 Hz, Single Phase, Ac Supply • Arrangement Forchanging The Vibration Level Is Provided. • A Digital Timer Adjustable From 0-99 Minutes • 200Mm Sieve, Material: Brass, Full Height: 50Mm • Is: 45?M, 63?M, 90?M, 125?M, 180?M, 355?M, 500?M, 1.00Mm, 1.40Mm, 2.00Mm, 2.80Mm, 4.00Mm, 5.60Mm, 8.00Mm, 11.20Mm, 14.00Mm, 20.00Mm, Sieve Cover, • Sieve Pan. , Rotary Vacuum Filterexperimentation: •To Study The Performance Of A Rotary Vacuum Filter. •To Study The Operation Of Rotary Vacuum Filter Under Vacuum. •To Determine The Specific Cake Resistance And Medium Resistance. Utilities Required: •Electric Supply: Single Phase, 220 V Ac, 3.5 Kw. •Water Supply. •Drain. •Slurry Required To Performing Experiment. Technical Details: •Filter Drum : Material Stainless Steel, Dia. 250 Mm, Length 350 Mm. •Mesh : Material Stainless Steel •Filter : Canvas Cloth •No. Of Zones : 6 Nos. •Drive For Drum : Fhp Motor Coupled To A Reduction Gear Box •Trough : Material Stainless Steel, Compatible Capacity. •Trough Agitator : Material Stainless Steel, Driven By Fhp Motor With Reduction Gearbox. • Slurry Tank : Stainless Steel, Capacity 75 Ltrs. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Vacuum Filtration Unit:With Vacuum Trap Kit Capacity: 1000Ml Manifold Slurry Handling Equipped With Oil Free Vacuum Pump, R Is A Piston Powered And Oil Free Vacuum Pump. Max. Power : 80W, Vacuum -750 Mm / Hg It Contains A Moisture Trap / Vacuum Regulator. With Light Weight Is Not Only Suitable For Liquid Filtration But Also Perfect For Stack Or Ambient Gas Sampling. Filtration Funnel With Clamp : 250-300Ml, Non Toxic, Unbreakable Polysulfone Funnel Is Used In Microbial And Particulate Analysis. Aluminium Clamp Allows One Handed Operation. Funnels Do Not Leak After Repeated Autoclaving, ( 1, 3, 6 Nos. ) Vacuum Manifold Ss-304 / Ptfe Designed With Three Vacuum Outlets Each With Leak Proof Two Way Valve And A Vent Port , Ro Top Sieve Shaker Utilities Required : •Electric Supply: Single Phase, 220 V Ac, 50 Hz, 5-15 Amp Combined Socket With Earth Connection. Earth Voltage Should Be Less Than 5 Volts. •Material For Analysis. •Floor Area: 1 M X 1 M. •Electronic Weighing Balance: Capacity 2 Kg ( Least Count 1 Gm ) Technical Details : •Sieve Assembly : Compatible To Sievesof 20-Cm Dia. ( For 6-7 Sieves ) •Drive : By ½ Hp Motor •Control Panel Comprises Of : Standard Make On Off Switch, Mains Indicator Etc. •Special Arrangement For Setting Time For Shaking. •An English Instruction Manual Consisting Of Experimental Procedures, Block Diagram Etc. Will Be Provided Along With The Apparatus T •The Whole Set-Up Is Well Designed And Arranged On A Rigid Structure Painted With Industrial Pu Paint. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Sigma Mixer: • Capacity – 5Kg Per Batch Or 20 Kg Per Hour Approx. • Contact Parts Stainless Steel 304 Grade. • Blades Are Sigma Shape Type. • Motor – 2Hp With Gear Box. • Tilting Type Discharge. • Voltage 415 Volts Ac 3 Phase. , Centrifugal Pump Test Rig Apparatus ( With Three Prefixed Speeds ) Required For Operation: •Water Supply. •Drain. •Electricity 1 Kw, 220V Ac, Single Phase. •Floor Area 2 X 1 M. •Tachometer To Measure Rpm Technical Specifications: •Pump : Kirlosker Make, Capacity 1 Hp Speed 2800 Rpm ( Max. ) Head 12 M ( Max. ) •Medium Flow : Clear Water •Drive : 1 Hp Crompton / Ge Make Motor Having Step Cone Pulley For Three Different Speeds. •Sump Tank : Capacity 110 Ltrs. •Flow Measurement: Using Measuring Tank With Piezometer, Capacity 70 Ltrs. •Stop Watch: Electronic. •Pressure Gauge: Bourdon Type. •The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: •Measurement: Electronic Energy Meter, L&T Make. •Mcb: For Overload Protection. •Energy Standard Make On / Off Switch, Mains Indicator, Etc. , Pipe Friction Apparatus Requirment For Operation: •Water Supply. •Drain. •Electricity 0.5 Kw, 220V Ac, Single Phase. •Floor Area 1.5 X 0.75 M. Technical Specification: •Pipe Test Section: ( I ) Dia ½”, Length : 1M, Material G.I. ( Ii ) Dia ¾”, Length: 1.25M, Material G.I. •Water Circulation: Fhp Pump, Crompton / Godrej / G.E Makes. •Flow Measurement: Using Measuring Tank With Piezometer, Capacity 25 Ltrs. •Sump Tank: Capacity 50 Ltrs. •Stop Watch: Electronic. •Control Panel Comprises Of : • Standard Make On / Off Switch, Mains Indicator, Etc. •Instruction Manual : An English Instruction Manual Will Be Provided Along With The Apparatus Tanks Will Be Made Of Stainless Steel. •The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Orifice Meter Requirment For Operation: •Water Supply ( Initial Fill ) . •Floor Drain Required. •Floor Area Required: 1.5 X 0.75 M. •Mercury ( Hg ) For Manometer ( 250 Gm ) . Technical Specification: • Orifice Meter : Orifice Plate Made Of Stainless Steel And Housing Made Of Clear • Acrylic Compatible To 1” Dia. Pipe. • Water Circulation: Fhp Pump, Crompton Make. • Flow Measurement: Using Measuring Tank With Piezometer ( Capacity 25 Ltrs. ) And Electronic Stop Watch • Sump Tank: Capacity 50 Ltrs. • Instruction Manual: An English Instruction Manual Will Be Provided Along With The Apparatus Tanks Will Be Made Of Stainless Steel. • The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. • Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Rotameterrequirment For Operation: •Electricity Supply: Single Phase, 220 V Ac, 50 Hz, 5-15 Amp Combined Socket With Earth Connection. •Water Supply ( Initial Fill ) . •Floor Drain Required. •Floor Area Required: 1.5 M X 0.75 M. Technical Specification: •Rotameter: Compatible Range. •Water Circulation: Fhp Pump, Crompton Makes. •Flow Measurement: Using Measuring Tank S.S ( 304 Grade ) ( Capacity 25 Ltrs. ) And Electronic Stop Watch. •Sump Tank: S.S ( 304 Grade ) Capacity 50 Ltrs . •Control Panel Comprises Of: Standard Makes On / Off Switch, Mains Indicator, Etc. •Instruction Manual: An English Instruction Manual Will Be Provided Along With The Apparatus. •Tanks Will Be Made Of Stainless Steel. • The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Venturimeterrequirment For Operation: •Water Supply ( Initial Fill ) . •Floor Drain Required. •Floor Area Required: 1.5 X 0.75 M. Technical Specification: •Venturimeter: Material Clear Acrylic Compatible To 1” Dia. Pipe. Pressure Measurement: Differential Pressure Manometer. • Water Circulation: 0.5 Hp Pump, Crompton / Kirloskar Make. • Flow Measurement: : Measuring Tank Material: Stainless Steel, 304 Grade, 1.2 Mm Thick With Piezometer, Capacity: 25 Ltr, Measuring Tank With Piezometer ( Capacity 25 Ltrs. ) And Electronic Stop Watch • Sump Tank: : Material: Stainless Steel 304 Grade, 1.2 Mm Thick , Capacity: 50 Ltr. • All Ball Valves Operating Temperature Range: -400F To 3020 F. • Valves Working Pressure: In Range Of 600Psi, Vacuum Pressure Up To 2×10-5Psi. • Instruction Manual: An English Instruction Manual Will Be Provided Along With The Apparatus Tanks Will Be Made Of Stainless Steel. • The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Reynolds Apparatus Requirment For Operation: •Electricity Supply: Single Phase 220 V Ac, 50Hz, 5-15 Amp Combined Socket With Earth Connection. • Water Supply ( Initial Fill ) . • Floor Drain Required. • Floor Area Required: 1.5 M X 0.75 M Technical Specification: •Chemical Required: Dye ( Kmno4 ) - 10 Gm •Tube : Material Borosilicate Glass •Dye Vessel : Material Stainless Steel, Suitable Capacity •Capillary Tube: Material Copper / Stainless Steel. •Constant Head Water Tank: Capacity 40 Ltrs. •Water Circulation: Fhp Pump, Champion / Godrej Makes. •Flow Measurement: Using Measuring Cylinder. •Sump Tank: Capacity 60 Ltrs. •Stop Watch: Electronic. •Control Panel Comprises Of : •Standard Make On / Off Switch, Mains Indicator, Etc. •Instruction Manual : An English Instruction Manual Will Be Provided Along •With The Apparatus Tanks Will Be Made Of Stainless Steel. •The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Shell & Tube Heat Exchanger Requirment For Operation: •Water Supply 20 Lit / Min ( Approx. ) And Drain. •Electricity Supply: 1 Phase, 220 V Ac, 4 Kw. •Floor Area Of 1.5 M X 0.75 M. Technical Specification: •System: Water To Water. ( 1 – 2 Shell & Tube Type ) •Shell. : Material Stainless Steel. Insulated With Ceramic Wool And Cladded With Aluminum Foil. Dia. 220 Mm, Length 500 Mm ( Approx. ) 25% Cut Baffles At 100 Mm Distance 4 Nos. •Tube: Od 16Mm Approx., Length 500Mm ( 24 Nos. ) •Water Flow Measurement: Rota Meters ( 2Nos. ) One Each For Cold & Hot Fluid. •Hot Water Tank: Made Of Stainless Steel Insulated With Ceramic Fibre Wool. •Hot Water Circulation : Magnetic Pump •Heaters: Nichrome Wire Heater ( 2 Nos. ) •Control Panel Comprising Of: Digital Temp. Controller: 0-199.90C, ( For Hot Water Tank ) Digital Temp. Indicator: 0-199.90C, With Multi-Channel Switch •Temperature Sensors: Rtd Pt-100 Type. •With Standard Make On / Off Switch, Mains Indicator Etc. •Instruction Manual : An English Instruction Manual Will Be Provided Along With The Apparatus •A Good Quality Painted Rigid Ms Structure Is Provided To Support All The Parts. Control Panel: Standard Make On / Off Switch, Mains Indicator Etc. , Turbidity Meter:Turbidity Meter.Ntu ( Nephelometric Turbidity Unit ) Measuring Unit. Wide And Auto Measurement Range: 0-1000 Ntu. High Resolution: 0.01 Ntu / 1 Ntu. Four Operation Buttons And Three Calibration Points, Easy Operation. Range: 0.00-50.00 Ntu, 50-1, 000 Ntu.Auto Ranging And Data Hold. , Waterproof Large Screen Display Pocket Tester For Ph / Tds / Conductivity / Salinity / Temp: Temp. Display=0-50.0°C / 32.0-122.0°F Temp. Resolution / Accuracy=0.1°C / °F :0.5 C° / 0.9 F° Supply With Calibration Solutions: 1.Ph Buffer Solutions Ph 4.01 Buffer Ph 7.00 Buffer Ph 10.01 Buffer 2.Tds Calibration Solutions ( 480 Ml ) 50 Ppm, 300 Ppm, 1000 Ppm 3.Conductivity Calibration Solutions ( 4 8 0 Ml ) 100 Ms Kcl, 1413 Ms Kcl, 2764 Ms Kcl 4. Salinity Calibration Solution 5 Ppt*Nacl Calibration Solution , Kjeldhal Distillation:Kjeldahl Distillation •Kjeldahl Distillation Systems For Highly Reproducible Results For Nitrogen Estimation By Kjeldahl Method •Borosilicate Glass Assembly Along With The Ss Steam Generator •Process Kill Switch To Halt The Process In Case Of Accidental Door Opening •Detachable Bottom Drip Tray For Extra Protection Against Acid Attack •Single Encoder Push Button To Control All Automatic Functions •Anytime Alkali Addition During The Distillation Cycle •Tube Sensor That Enables Safe Operating Conditions In Event Of Tube Damage •Reagent Refill Level Sensor To Avert Reagent Dry Out. Specification :- •Steam Addition : Automatic •Maximum Distillation Time ( Mins ) •Current Consumption : 5.5 A •Distilled Water Addition : Manual , Digital Do Meter: Dissolved Oxygen Analyser Cum Temperature Indicator Along With Speed Regulated Stirrer. Gold / Silver Do Probe, Rtd Temperature Sensor. ( Table Model ) Specification:- Do Range : 0 To 20 Ppm Do Temperature : 0 To 60°C Do Resolutions : 0.1 Ppm Do Resolutions : 0.1°C , Hardness Tester : Tablet Hardness Tester ( Monsanto Type ) Is A Fairly Handy Instrument For Taking Quick Readings For The Hardness Of Tablets. This Tablet Hardness Tester ( Monsanto Type ) Is Made Of Brass Turned Parts, Heavily Chrome Plated, The Scale Is 0 To 20Kg And The Index Mark And Division Is In 1Kg Reading. Scale Adjustable For Zero Setting As Per Size Of The Tablets. , Conductivity Meter : Deluxe Conductivity Meter Using Latest Microcontroller, Auto Ranging ( 6 Ranges From 20?S To 1000Ms ) , Auto Temperature Compensation, Auto Cell Constant Measurement, Touch Keys Along With Conductivity Cell Of 0.1 Cell Constant And Temperature Probe. ( Table Model ) , Muffle Furnace : Our Muffle Furnace Finds Application In Various Laboratories And Research Facilities To Test The Characteristics Of Materials At Extremely High And Accurate Temperatures. Compactly Designed, And Has A Sturdy Construction For Long Term Use. Insulation Is Provided With Ceramic Fiber Wool. The Working Temperature Is 1150°C, With The Maximum Temperature Being 1200°C. The Furnace Is Fitted With A Dual Display Microprocessor Pid Digital Temperature Indicator Cum Controller, Ci / Al Thermocouple. Heating Elements Are Made Up Of Kanthal Wire. It Is Workable On 220 V Ac 50 Hz Triple Phase. Inner Muffle Size : 300 X 150 X 150Mm , Automatic Karl Fisher Titrator : Microprocessor K.F Moisture Titrator With Built-In Magnetic Stirrer, Auto Computation Of Moisture In Ppm, %Age And Mg Of Water. Storage Of Date, Time Batch No. & Final Results Of 20 Titrations. K.F. Reagent Dispensing By Motorized Process. Final Results Are Flashed On 8 Digit Digital Display , Soxhlet Apparatus : Soxhlet Apparatus With Six Chamber Mantle Type, Flask Capacity 250 Ml, 2 Vertical, 2 Horizontal Rods With Adaptor And Screw To Hold Flask , Six Test Heater Of High Quality Nicrom Wire With Cotton Cover Including Soxhlet Apparatus Glass Parts, Rb Flask Of 250Ml, Extractor, Condenser, Silicon Tube, Thimble ( 4 Packet ) . , Thin Layer Chromatography Kit : This Unit Is Based On Desaga German Pattern Developed By Dr. Stahl Having Movable Applicator With Inbuilt Thickness Adjustment Arrangement Between 0 To Movable 2 Mm. With The Following Components. Spreader ( Applicator ) Made Of Electroplated Brass. Perspex Base Size 114X23 Cm. To Support 5 Glass Plates Of Size: 20X20 Cm. Or 10 Of 20X10 Cm. And Two Plates Of 20X5 Cm. Drying Plate Rack Anodised Aluminum For Ten 20 X 20 Cm. Plates. Spotting Template Perspex. Developing Tank With Lid. Five Glass Plates 20 X 20 Cm. And Two End Plates 20 X 5 Cm. Or Ten 20 X 10 And Two 20 X 5 Cm Plates. Micro Pipette Coming Glass. Scriber. Glass Sprayer With Rubber Bellow. Spares : A. Chromatography Tank ( Tlc Chamber ) With Cover For 20 X 20 Cm. Plates. B. Chromatography Tank ( Tlc Chamber ) With Cover For 20 X 10 Cm. Plates. C. Chromatography Tank ( Tlc Chamber ) With Cover For 20 X 5 Cm. Plates. Iii. Tlc Glass Plates All Side Ground : A. 20 X 20 Cm. B.20 X 10 Cm. C. 20 X 5 Cm. Iv. Spreader For Tlc : A. Brass B. Aluminium , Paper Chromatography Kit Compact Chromatography Cabinets Are Useful For Lab. It Is Joint Less Bakelite Molding Supplied With Its Accessories W To Conduct The Practical And To Evaluate Rf Values. The Standard Setup Consists Of Bakelite Cabinet With Lid, With Front Sliding Glass, Ss Pot, Hanger To Hang Chromatography Paper Stand, Glass Sprayer With Rubber Below, Supplied With 1Pkt. Of 25 Chromatography Shttes Of Size 18X10cm , Uv – Vis Spectrophotometer ( Double Beam ) Wavelength Range : 190-1100Nm Spectral Bandwidth : 1 Nm Optical System : Double Beam, Blazed Holographic Grating ( 1200 Lines / Mm ) Wavelength Accuracy : ±0.5Nm Wavelength Repeatability : =0.2Nm , Colorimeter :Digital Photo Colorimeter 8 Filters, Mains Operated Using Latest Microcontroller, With 2½ Digit Led Display, Sample Size 1Ml. Auto Zero Using Touch Keys. , Tintometer: Applicable Scale : Rybn, Ry, Ry10:1, Aocs Tintometer® Ry, Chlorophyll & Beta-Carotene Scale Applicable Standard : Aocs Cc 8D-55; Aocs Cc 13B-45; Aocs Cc 13D-55; Aocs Cc 13E-92; Aocs Cc 13J-97; Bs684; Bs684 Section 2.20; Chinese Gb / T 22460-2008; Is 548 ( Part 1 ) -2010; Iso 15305; Iso 27608; Ms 252 : Part 16; Ms 817 : Part 12 Integrated Cell Heater : Yes Removable Cell Chamber : Yes Colour Type : Transparent Wavelength Range : 380 - 780 Nm Wavelength Accuracy : 0.2 Nm Spectral Scope : < 15 Nm Photometric Range : 0 - 100 % T Photometric Linearity : ± 0.01 % T Repeatability : ± 0.5 % T Stray Light : < 0.01 % T Detector : Spectrometer Interfaces : Usb; Rs 232 Instrument Housing : Aluminium Portability : Benchtop Display : Lcd Input Voltage : 110 Vac, 250 Vac, 60 W ( 24 V ) Environmental Conditions : Temperature: +5°C - 40°C ; Humidity: Up To 90 % Non Condensing Stock Conditions : Temperature: -20°C - 85°C ; Humidity: Up To 90 % Non Condensing Compliance : Ce Languages User Interface : English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese Supply Includes : Instrument With External Power Supply; Set Of 3 Power Leads ( Uk, European And United States ) ; Quick Start Guide ( Hard Copy ) ; Usb Memory Stick ( Containing The Manuals ) ; Certificate Of Conformity; Conformance Filter; Cell ( Borosilicate, 1 Path Length ) ; Cell ( Borosilicate, 5¼” Path Length ) , Gas Cylinder With Commercial Oven Containingsingleburner , Meat Mincer Grinder:Power 3 Hp Capacity 500 Kg Per Hour Usage / Application Commercial Voltage 110 – 220 V Frequency 50 Hz Weight 200 Kg Country Of Origin Made In India. , Sausage Filling Machine ( Manual ) Vertical Type Capacity : 3L Dimension : 300*300*550Mm Gross Weight : 13Kg , Full-Automatic Meat Smoke Oven With 1M Chimney Capacity : 250Kg. Power ( Kw ) : 11.32 Lp / Hp Temperature : 110ºc Lp Steam Pressure : 0.1-0.2Mpa Hp Steam Pressure : 0.3-0.6Mpa Smoke Ignition Time : 15Min , Edible Oil Extraction Plant : Oil Expeller 5 Bolt, Modern Design, With Round Kettle Bearing System Gear Box Single Gear Fabricated Hobbing Cut Gear Oil Collection Tray , Taps Spanner, Pipes. Etc With Ms Fabricated Base Frame Complete With All Accessories With 5 Hp 3 Phase Electric Motor Crushing Capacity 25-30 Kg / Hour Filter Press 12 X 12 X 12 Plate Filter Nut-12, Cock-12 Spennar Set 1 Set Filter Cloth , Oil Feeding Pump 20Mm Non Return Valve = 2 Pcs Foot Valve-1 Pcs , Oil Collection Tray Pipeline And Fitting Accessories Production Capacity 50-60 Leter / Hour All Type Edible Oil Can Filter Weight :- 250 Kg 10 Liter Storage Tank Total Required Space :- 6 Ft X 6 Ft Total Weight :- 600 Kg , Wet Grinder Tilting Capacity 5 Liters. Tilting Type. Contact Parts Of S. Stone Grinding Process. W I T H Less Heating To Protect The Flavor Of Food Products I.E. Dal, Rice Etc. Drive By 0.5Hp Or 1Hp Motor, 220 Votls Ac Operated. , Soda Water / Carbonated Soft Drinks Plant Semiautomatic Soda Water Pet Bottle Filling Set Up 1. Water Chilling Unit 300 Ltr Capacity 2. Automatic Carbontor With Ss Pump Auto Cut Water Level System Co2 Gas Controller 3. Soda Water 2 Head Semiautomatic Filler With Hand Operated Lever Pneumaticclly Operated Bottle To Be Fill 200Ml To 500Ml All Body Made Of Ss Output 450 Bph 4. 1 Head Pneumatically Glass Bottle Capper 5. 2 Head Pet Bottle Washer 6. Line Charges Carbonator To Filler 7. Air Compressor With Autocut System For Filler Use 8. Reverse Osmosis Plant 250Lph Capacity With Ss Stand Membrance Microne Filters Dosing Pump Raw Water Pump High Pressure Pump Etc , Milling Machine ( Food Grinder Machine ) Capacity / Hr.: 8- 10 Kg. Coarse - 18Kg. Motor: 1.5 Hp, 220V Single Phase Moc: Structural Parts Are Ms & All Cantact Parts Are S 304 , Ss Pulvariser2 Hp Motor Chamber Size : 6X3 Inch Table Top Laboratory Capacity / Hr.: 5-10 Kg. Motor: 1 Hp, 220V Single Phase Moc: S 304 , Rotary Rack Oven ( Electric Heated ) : Tray Capacity : 12 ( 12*18 ) Fuel Average : ( Diesel ) : 0.5 Ltr Approx Dimension ( L X Wx H ) : 60X42X74 Total Power Load : 1.5 Hp Approx Baking Area : 2160 Sq. In Production Capacity : 11 Kg Biscuit / Hr Approx 22 Pcs Bread ( 400 Gm ) / 25 Min Approx , Deck Oven : 3 Deck 6 Tray Gas Deck Oven Capacity : 250 Per Batch Operation Type : Automatic Power Source : Gas Number Of Decks : Double Body Material : Stainless Steel Certification : Iso Voltage : 220 V Weight : 190Kg. ( Approx ) , Candy Making Machine Hand Operated Capacity: 1-5 Kg Material Of Contraction Must Be Food Grade Material , Micro Pipette: Single Channel Fixed Vol Pipette , Calibration & Accuracy As Per Iso 8655 Volume Range ( ?L ) : 0-10 ?L , Haemocytometer In Box With Counting Chamber, Cover Glasses Pair, Rbc And Wbc Pipettes With Rubber Suction Tubing And Mouth Piece. , Digital Electronic Balance Capacity : 220Gm Readability : 0.001Gm , Air Conditioner For Sensitive Lab Equipments / Microbiology Lab & Microbio Technology Labcapacity: 1.5 Ton, Rating: 5 Star With Inveter, Any Standard Brand , Small Gas System : 5Kg Gas Cylinder With Accessories , Hydrometer Triple Scale: 3Pcs. Brix: 0-30 ( 3Pcs ) . Sp. Gravity : 3Pcs , Alcohol Distillationunit 1.Capacity 1000 Ml 2.Made Of Borosilicate Glass 3.Ideal For Distilling Alcohol In The Laboratory To Produce The Purest Grade 4.Thorpes Revenue Still For Purification Of Ethyl Alcohol , Pycnometer Bottles : Specific Gravity Bottles ( Pyknometer ) With Thermometer And Capillary Side Tube Capacity : 25Ml Specific Gravity Bottles ( Pyknometer ) With Thermometer And Capillary Side Tube Capacity : 50Ml , Deionizer : Features • Unique Digital Conductivity Meter Fitted With Unit. • In-Built Pre Filter. • Upflow Treatment. • Can Be Connected Direct To Water Tap. • Treated Water Will Have The Conductivity Less Than 10 Ms / Cm And Ph Of 7.5 -9. • Non Corrosive Regeneration Tank. • High Capacity Cation & Anion Exchange Resins. • Easy Portable - Metal Stand And Trolley. • Simple Periodic Regeneration - Negligible Operating Costs. • Output / Hr ( Ltrs ) : 50 , Water Distillation Apparatus- Stainless Steel Capacity 10 Ltr Per Hour With 3 Heating Element Total Load Capacity-3 Kw Table Top Model , Slab For Instruments : Dimension: 12 X2.5X 3.5 ( Lx W Xh ) , Moc: Bricks With Marble Top , Sink : Dimension: 2 X1.5 ( L Xw ) Moc: Ss , Notice Board For Fpt Dept. Size : 2X2x2 Feet. Moc: Inside Velvet, Wooden Frame, Glass Cover , Laboratory Name Plate Dimension: 1 X10 ( Lxw ) Moc: Fiber , Department All Sign Board : Dimension: 3 X3 X6 ( Lx Wxt ) , Moc: Acrylic Sheet, Aluminiumframe , Ice Cream Plant: 1 ) Batch Pasteurizer : 01 No. Batch Pasteuriser Having Capacity 25 Ltrs Fabricated Out Of 2 Mm Thick S.S.304 Quality Stainless Steel Material For Inner Tank And 2 Mm S S Intermediate Shell And 2 Mm Thick Outer Tank In S S With Glass Wool Insulation. Batch Pasteuriser Are Used For Pasteurization Of Milk With Smp And Stabilizer And Emulsion, Cream, Butter. The Pasteurization Temp. Of This Milk Will Be Around 65-70 Deg.C. Heating Arrangement For Ice Cream Mix One Small Lpg Gas Fired Boiler Are Attached With Batch Pasteuriser. 2 ) S.S. Milk Pump : 01 No. S. S. Milk Pump 0.5 Hp Operated On 415 Volts 3 Phase Sanitary Design Having Capacity Not Less Than 500 L.P.H. @ 10 Mwc Head. 3 ) S.S. Conical Inline Filter : 01 No. One S. S. Filter To Be Fitted Between Tank And Milk Pump. The Filter Is Having Fine And Coarse S. S. Mesh For Proper Filtration Of Milk. 4 ) Homogenizer: 01No. Capacity 25 Ltrs / Hrs. Design – Robust, Strudy And Self Supported. It Should Be Two Stage Designs. High Pressure Homogeniser With Hydraulically Two Stage Homogeniser Head Having Discharge Capacity 25 Lph At Working Pressure 150 Bar With 1 Hp Electric Motor Of 1440 Rpm, 415 V, 50 C / S V Belts Drive Arrangement With Frame And Ss Cabinet Enclosure All Contact Part Are Made Of Ss 316 Following Are The Accessories Supplied. Glysrine Filled Pressure Gauge 400 Kg / Cm 1 No. Ss Suction & Discharge Pipe With End Collection 1 Set. Tool Kit. 5 ) Aging Vat : 01No. Aging Vat Having Capacity 25 Ltrs Each Fabricated Out Of 2 Mm Thick S.S.304 Quality Stainless Steel Material For Inner Tank And 2 Mm S S Intermediate Shell And 2 Mm Thick Outer Tank In S S With Thermacole Insulation. Aging Tank Are Used For Preparation Of Ice Cream Mixes And Maintain The Temp. Of Ice Cream Mix Up To + 5 Deg.C. Tank Is Connected With Separate Glycole System To Cool Down The Ice Cream Mix. 6 ) Ss Pipes & Fittings : 01Lot One Lot Of S.S. Pipes And Fittings Confirming Ofs.M.S. Standard With Necessary Valve And S. S. Clamps To Interconnect All Milk And Cip Lines Based On Compact Layout. 7 ) Batch Freezer : 01No. Batch Freezer Having Capacity 5 Ltrs Of Ice Cream Per Batch In Around 30 Minutes. All Ss Part Connected With Ice Cream Mix Ss 316 Material. The Suitable Capacity Refrigeration System Connected To Freezer To Cool Down The Temp. Of Ice Cream From + 5 To Minus 5 Deg.C. Within 30 Minutes. The Refrigeration System Operates On R-22 Gas With Air Cooled Condenser. 8 ) S. S. Pipes And Fittings: 01 Lot One Lot Of S.S. Pipes And Fittings Confirming Of S.M.S. Standard With Necessary Valve And S. S. Clamps To Interconnect All Milk And Cip Lines Based On Compact Layout. 09. Batch Freezer: 01 No. Batch Freezer Having Capacity 5 Ltrs Of Ice Cream Per Batch In Around 30 Minutes. All Ss Part Connected With Ice Cream Mix Ss 316 Material. The Suitable Capacity Refrigeration System Connected To Freezer To Cool Down The Temp. Of Ice Cream From + 5 To Minus 5 Deg.C. Within 30 Minutes. The Refrigeration System Operates On R-22 Gas With Air Cooled Condenser. Air Pump Is Also Connected With Batch Freezer. 10. Hardner Cum Deep Freezer:01 No. 100 Ltrs Capacity Deep Freezer Which Is Required For Hardening & Storing Of Ice Cream. The Deep Freezer Is Operated At Minus 20 Deg. C. With Sealed Compressor, Air Cooled Condensing Unit . 11. Ice Candy Machine: 01 No. Bar Ice Cream Candy Lolly Tank With Aisi Ss316 Product Contact :2 Moduls. It Would Be Fitted With Stick Holder To Make The Ice Candies. It Will Be Fitted With Suitable Refrigeration System ( Glycole ) . 12. Flavour Tank: 01 No. This Tank Will Be Made From Aisi Ss316 Will Used To Add The Required Flavour In The Mix. This Will Be Fitted In The Suction Line Of The Centrifuge Pump With Valve. Both The Flavour And Mix Will Be Pumped At A Time So That The Flavour Mixes With The Ice Cream Mix. 13. M. C. C. Control Pannel: 01 No. One Mcc Control Panel With All Necessary Star- Delta, D.O.L. Starter, Push Buttons Indicating Lamps, And Interlocking. 14. Power Earthing & Control Cable : 01 Lot. One Lot Of Power Earthing & Control Cable To Connect All Electric Motors To Mcc Control Panel. 15.Structural And Supports:01 Lot. One Lot Of M. S. Channel, Angle And Pipes Required For Support Foundation Frames And Necessary Fabrication Work , Evaporator : Vaccum Evaporator For Lab Model With A Feed Rate Of 50Kgs / Hr Technical Specification Feed Rate - 50 Lph Vacuum Vaporator Capacity: 50 Lt / H, Made Of Aisi 304 Quality Stainless Steel. With Platform The Water In The Milk Is Evaporated By The Circulation System Of The Machine. At The Same Time, This Machine Detects Bad Odors In The Milk. Vacuum Effect: 12 M3 / H, Cip Cleaning Ball, Level Indicator Glass, It Works With Steam At 3 Atu Pressure. Standard Capacity: Input 50 Lhp - Output 15 Lph ( 35 Water Decreasing Capacity ) Working Bar: Between 3-5 Vacuum Pump: Mazda , Vacuum Pressure 650 Mm-Hg, Monoblock Type. Inlet And Outlet Diameter: Dn 25, Steam Required 20 Kg / Hr Continuous Milk Process System Motor Power 5, 4 Kw Ac, 3 * 380 V, 50 Hz, Ip 55, Ie2 Condensate Heat Exchanger: Aisi 304 Stainless Steel, 500 Lt / H Capacity, Tubular. Vacuum Meter: The Measuring Range Is Between + - 0 / -70 Mbar. Control Panel: Aisi 304 Stainless Steel, Contactor, Platform: Aisi 304 Stainless Steel, Stainless Steel Profile, Adjustable Legs, All Connections On The Chassis Are Immobilized; The Entire System Is Completed On The Platform. Ts Increase From 8.5 Upto 28 And More , Khoya Making Machine ( Fully Ss ) : Khoya Making Machine ( Fully Ss ) Lab Scale, Semi-Automatic. Capacity / Hr : 20 - 100 Lph 220V Single Phase Moc: Structural Parts Are Ms &All Cantact Parts Are Ss 304 , Paneer Processing Plant ( Ppp-20 System ) , Capacity: 60 Kg / Day ( 8 Hr Operation ) : Scope Of Supply For Ppp-20 System Milk Heating System The Unit Consists Of An Non-Insulated Vessel, Capacity 40L, Moc Astm 304, For Coagulating 20L Milk @ 90-95 Degrees Celsius. There Is A 2Kw Element Attachment For Auto -Heat Generation As Per Standards. Complete With Pressure Relief Valve, Temperature Guage. The Bottom Discharge Butterfly Valve Is 38.1 Mm. Usual Time For Heating Is 10 Minutes. Milk Coagulation System The Bottom Part Consists Of A 25L Coagulation Vessel With A Perforated Filter Crate For Whey Separation. This Is A Wheeled Vessel That Can Be Moved To The Pressing Bench For Further Process. Paneer Boxes / Moulds : This Comprises A U Shaped Body, Two End Plates And A Top Plate.All Of The Components Are Of Stainless Steel And Are Perforated To Allow The Whey To Flow Out.It Is Made Up Of 4 Removable Pieces For Easy Cleaning. Size Of The Moulds In Inches ( L / B / H ) : 13 / 9 / 4 Paneer Press: It Consists Of Ms Top Frame And Stand, All Other Parts Like Shaft For Press, Handle, Drainage Tray Etc. Are Having Ss 304 Mocthis Will Be Used To Press Chhana To Get The Final Paneer Block Of 4-5 Kg. Manual Paneer Cutter: Single Press Cutter For Customized Size Will Be Provided From 200Gm To 1 Kg. Consists Of A Slotted Tray And The Cutter Press With 0.5 Mm Blades Tool Box: Comprehensive Tool Box With Electrical Diagrams And Electrical Spares: Operation Manual: A Detailed Manual Is Provided Containing The Operating And Maintenance Procedures. Three Copies Hard, One Soft Copy. Accessories :- Vacuum Sealing Unit Must Be Quoted – 1 No. , Ghee Making Machine Lab Scale, Semi-Automatic. Capacity: 5-20 Kg Impeller: 20-25 Rpm, Bottom Drain Valve 220V Single Phase Moc: Structural Parts Are Ms & All Cantact Parts Are Ss 304 , Horizontal Sealer Features :- 1 ) Useful For Easy Transportation & Storage. 2 ) Simple Usage With High Efficiency. 3 ) Low Energy Consumption & Labor Saving. 4 ) Protect Product From Dust, Moisture, Surface Damage & Pilferage. Specification :- Temp. Range : 0-300*C Power : 500W Sealing Speed : 0-12Mtr / Min. Sealing Width : 8-10Mm , Gas Cylinder With Commercial Oven Containing Single Burner , Digital Electronic Balance : Electronic Precision Balance Capacity : 220Gm Readability : 0.0001Gm ( 0.1Mg ) Linearity : 0.4Mg Pan Size : 80 Mm , Lcr Q Meter Lcr Meter Features An Innovative Automatic Selection Technology, Automatically Measuring L, C And R With Q, D And T By Just Turn On The Meter. The Testing Frequency Is Up To 10Khz And It Can Output Up To 100Khz Test Frequency. It Provides High Accuracy With Four Or Five Terminal Kelvin Measurements. 4-1 / 2 Digits, Dual Lcd, Auto Lcr / Dcr / D / Q / Esr / Phase Angle, Variable Frequency Output Of 100Hz / 120Hz / 1Khz / 10Khz / 100Khz. , Hay, Sbridge Trainer Kit : Inductance Measurement Range: 50Mh To 150Mh Product Description Hays Bridge Trainer Is Used To Design Hay’S Bridge, Which Determines The Value Of Unknown Inductors ( L ) . The Students Can Balance The Bridge Either By Observing Waveform On Cro Or By Using The Built In Speaker. This Kit Has Been Designed Keeping Students In Mind So Its Very Easy To Understand And Use. Details:- Inductance Measurement Range: 50Mh To 150Mh. On Board Oscillator Section. On Board Circuit For Designing Hay’S Bridge On Board Amplifier Section On Board Unknown Inductors For Conducting The Experiment On Board Speaker Interface Test Points Are Provided To Analyse Signals At Various Points On / Off Switch And Led For Power Indication. Bare Board Tested Glass Epoxy Smobc Pcb Is Used. Block Description Screen Printed On Glassy Epoxy Pcb All Interconnections Are Made Using 2Mm Banana Patch Cords Supplied With User Manual And Patch Cords With Built-In Power Supply Enclosed In A Wooden / Plastic Box , Anderson’S Bridge Trainer Kit : This Is Useful For Students To Determination Of Self Inductance Of A Coil By Anderson’S Bridge. Features • Stand Alone System • Inbuilt Audio Frequency Generator • In-Built Stable 3.5 Character Digital Meters • 0-20 V Variable Power Supply •Easy To Learn And Illustrative Study Materials • Attractive , Durable And Insulating Wooden Casing. Technical Specifications On Board Dc Power Supply : +12V Dc Ammeter Range : 1?A To 200Ma Display : 3½ Digit , Desauti Bridge Trainer Bridge Features • Stand Alone System • In-Built Stable 3.5 Character Digital Meters • 0-20 V Variable Power Supply •Easy To Learn And Illustrative Study Materials • Attractive, Durable And Insulating Wooden Casing. Technical Specifications On Board Dc Power Supply : +12V Dc Ammeter Range : 1?A To 200Ma Display : 3½ Digit Voltmeter Range : 1Mv To 200V Display : 3½ Digit Mains Power : 230V Ac ±10% , Wien’Sbridge Trainer Kit : Frequency Measurement Range: 10Hz To 10Khz , Display Counter : Should Be Provided With The Facility To Count 6 Digit On Digital Display ( Led / Lcd ) With Maximum Count Of 999999 , Cardiac Pacemaker : Int.- Ext. Pacemaker Internal – External Pacemaker Demo. Type Trainer Internal – External Pacemaker Is External Dives To Stimulate Heart. Two Mode Fixed Mode And Demand Modes. Toggle Switch For To Select The Mode. Rate Control Knob To Adjust Heart Rate Pulse Rate 30 To 150 Bpm±. Positive Pulse Duration Of Pulse Wave 2Ms.± ( Fix Or Adjustable ) , Out Put Intensity 0 To 9V Adjustable. Input Ecg Sync Pulse 9V±. Disc Electrodes. Audible & Visible Indication For Each Pulse. Test Points On The Top Of Instrument Through 2Mm Socket. Power Supply 230V, 50Hz. Dimensions 250 X 75 X 250 Mm± Study On Skrip Int.- Ext. Pacemaker Study Of Pacemaker Working. Study & Need Of Mode Internal External. Study Of Placement Of Electrodes. Study Of Demand & Fixed Mode. Study Of Signal Processing, Working Of Each Block & Etc , Patient Monitor : Should Be Provided With The Facility To Monitor Real Time Ecg, Noninvasive Blood Pressure, Spo2, Respiration Rate And Temperature Parameters For Adult, Pediatric And Neonatal Monitoring Along With Necessary Accessories. , Dc Defibrillator : Defibrillator Using Microcontroller Defibrillator Using Microcontroller Trainer This Is Demo Type Instrument. Three Is Instant And Sync Modes, Joules & Threshold Control. Low Output Voltage. Output Connects To Dso. Ecg Input Sync Pulse. Input Ep Stereo Banana Socket Indication Armed, Sync & Inst, Charging & Discharging With Audio Indications 16X2 Lcd Display, Set, Up, Down, Enter Key. Charge Key Up & Down Output Ep Stereo & 4Mm Socket, 100Mm Paddle Disc Electrodes With Switch Test Point In The Front Panel Of Instrument Through 2Mm Socket. Supply 230V / 50Hz, Dimension 150 X 150 X 250Mm±, Standard Accessories , Ventilator : Bipap Non Invasive Machine Trainer The Bipap Machine Comes With A Face Mask Or A Nasal Mask, A Motor, A Tube That Connects The Motor To The Mask And A Humidifier. Bipap With Humidifier Prevents Issues Like Dry Mouth, Dry Throat, Cracked Lips, Nosebleeds, Chest Pain, And Nasal Infections. The Machines Motor Blows Pressurised Air Through The Tube And The Air Enters Your Lungs Through The Mask. This Expands The Size Of Your Lungs, Resulting In A More Effortless Inhalation Of Oxygen And Exhalation Of Carbon Dioxide. It Is Important To Carefully Follow Your Doctors Instructions On How And When To Use The Bipap Machine To Achieve The Desired Result. Features Of Bipap Machine With Humidifier: Simple, Reliable, Sensitive, And Quickly Synchronized With The Patient Applicable To Sleep Snoring And Sleep Apnea Patients, Cpap, S, S / T, T Operating Modes Ipap 4-30, Epap 4-30, 8-Step Inhalation-Exhalation Triggers Adapt The Pressure Automatically To The Patients Needs And Provides Better Synchronization Choose Between A Nasal Or Face Mask Available In S / M / L Sizes. Easily Adjust The Inhalationexhalation Pressure, Inhalation Time ( 0.5-3 Seconds ) And Respiration Rate. 5 Color Lcd Display With Interactive User Interface And Ergonomic Buttons Monitoring Vt, Res Rate, Min Vent, Leak. Alarms In All Respects. 5-Step Adjustment Of The Humidifier. Display Of The Key Parameters Of Therapy In The Online Mode Weight: 5 Kg, Dimensions 36 × 23 × 28 Cm Accessories- Humidifier, Mask, Hose, Adapter, Filter, User Manual , Pulse Oximeter : Integrated With Spo2 Probe Processing Display Module Can Be Used In Hospital, Home, Community Medical Treatment, Sports Healthcare, Etc. Can Be Measure Spo2 And Pulse Rate Accurately Spo2 And Pr Display, Pr Waveform And Barographs Display Battery Voltage Indicator, Rechargeable Li Battery 4 Direction Display, Four Levels Adjustable Brightness Pulse Sound Function, Alarm; Can Set Upper And Lower Limits. Usb Interface, Software, Analyses, Store, Print Low Power Consumption; Shut Off Automatically Small Volume ( 57 ( L ) X 32 ( W ) X30 ( H ) Mm ) Light To Carry Technical Parameters 1.3 65K Color Oled Display, Resolution 160 X128 Spo2: 35~99%, Pulse Ratio:30~250Bpm Resolution: 1% For Spo2, 1Bpm For Pulse Ratio Accuracy: ±2% ( 70%~99% ) , Unspecified ( <70% ) For Spo2, ±2Bpm Or± 2% ( Select Larger ) For Pulse Ratio Interference Resistance Capacity Against Ambient Light And Measurement Performance At Low Perfusion. , Infusion Pump : Should Be Provided With Peristaltic Pump Mechanism, Bolus: 600Ml / H, Flow Rate Range: 1-600Ml / H, Volume Limit: 1-9999 Ml, Accuracy:‡5% , Bio Amplifier Trainer Kit: The Trainer Kit Should Comprise The Ecg, M G And Eeg Amplifier Circuits Along With Supporting Accessories , Active Filters Kit For Bio Signals : This Should Comprise The Circuits Of Active Filters ( Active Low Pass Filters, Filters Kits Active High Pass Filters, Active Band Pass Filters, Active Notch Filters Etc. ) Used In Ecg, Emg And Eeg Measurements Along With Supporting Accessories , Adc Kits For Bio Signals : This Should Comprise For Circuit Modules For Converting Ecg, Emg & Ecg Signals Form Their Analog Form To Digital Form Along With Supporting Accessories , Emg Machine :Emg Amplifier 3 Lead With Audio And Usb Output Bipolar Real Time Emg Amplifier 3 Lead With Audio And Usb Trainer Real Time Emg Wave Measurement, Unipolar & Bi-Polar Mode Disc Electrodes With Velcro & Disposable Electrodes, Emg & Self-Test Mode, Gain & Test Adjustable. Usb & Dso Output. Audio Output Cw 1Wat ±., Test Point On The Top Of Instrument 2Mm Sockets Power Supply 230 V, 50Hz. Dimensions 305 X100 X 250 Mm± Study On Skrip Emg Amplifier Study Of Electric Potentials Generated By The Muscles, Muscle Activity, Nerve Conduction Velocity, Muscle Feedback, Muscle Strength & Signal Processing Placement Of Electrodes, Amplification, Filters, Gain, Self Test, Voltage & Frequency Responses & Etc Biowave Software Advance Software For Measurement Of Emg Single. It Is With Measurement Of Voltage, Time & Frequency. Setting Voltage & Time, Save As, Open, Print, Offset Setting, Etc. For Advance Study Values In Excel. , Hospital Information On System Software : The Software Module Should Comprise The Facility Of Monitoring Out- Patient Management, Purchase Management, In-Patient Management, Ot Management, Medication Orders, Laboratory Management, Pharmacy, Radiology, Blood Bank, Billing &Collection Etc , Ecg Machine : Ecg Amplifier 12 Leads Selector With Usb Ecg Amplifier 12 Leads With Selector Switch Trainer Kit 12 Leads Real Time Amplified. Ecg Output Up To 10Vpp± I, Ii, Iii, Avr, Avl, Avf, V1 To V6 Chest Lead, Standard Unipolar And Bipolar Leads Gain Adjustable, Self Test Clamp & Suction Electrodes.Dso O / P Through 4Mm Socket Test Point On The Top Of Instrument Through 2Mm Socket. Power Supply 230 ±10%, 50Hz, Dimensions 250 X 75 X 250 Mm± Study On Skrip Ecg Amplifier Measuring The Electrical Activity Generated By The Heart. Different Lead Combination Lead. Study Of Normal Abnormal Ecg Waves. & Signal Processing Placement Of Electrodes, Amplification, Filters, Gain, Self Test, Voltage, Frequency Responses, Etc Biowave Software Software For Measurement Of Ecg Single. Measurement Of Voltage, Time & Frequency Of Each Point. Setting Voltage & Time Expand The Signal, Save As, Open, Print, Etc. For Advance Study Excel Values, Offset Setting, Etc , Eeg Machine : Method Single Amplifier With Usb Trainer Kit Real Time Eeg Amplifier Output, 10-20 Electrodes Placements Electrodes Placement Select By Mode & Right & Left Switch Study Of Brain Activity & Signal Processing Eeg Left, Right & Self Test Mode, Gain Adjustable, Disc Electrodes Bipolar One Electrodes Set.Disc & Disposable Electrodes Eeg Dso & Usb Output Through 4Mm Socket & Usb Software Biowave, 6 Channel, Save, Open, Print, Excel Values, Measurement Voltage, Frequency, Time, Offset, Select 1 Or 6 Channel, Etc Test Point On Top Of Instrument, 2Mm Socket. Power Supply 230 ±10%, 50Hz, Dimensions 305 X100 X 250 Mm± , Temperaturesensortrainer Kit This Should Comprise On Board 4 Different Kind Temperatures Sensors ( Lm 35 , Rtd , Themister, Thermocouple Type ) Digital Display , Pressure Transducer Trainer Kit : Pressure Gauge: 0-150 Psi, Pressure Vessel: 0-100 Psi, Hoses Size: 1.5M, Digital Display Product Description Pressure Transducer Trainer Is Designed To Learn Concept Of Pressure Measurement. It Helps Students & Industry Professionals To Understand Operation Of Pressure Transducer In Detail. Built-In On / Off Controller Is Also Provided With Audio & Visual Indicators. It Also Has A Pc Interface Through Usb For More Interactive Understanding Of Transducer Characteristics. User Can Also Take A Direct Printout If Desired. Pressure Transducer Trainer Has A Wide Range Of Experiments With User Friendly Software. Features: Differential Input Pressure Transducer Precise Signal Conditioning Self-Contained And Easy To Operate Data Acquisition Using Usb Sensitive, Linear, Stable & Accurate Functional Blocks Indicated On Board Mimic On Board Digital Voltmeter On Board Indicators; Buzzer & Led On Board On / Off Controller , Piezoelectric Transducer Trainer Kit : Digital Display With 3 1 / 2 Digit To Read +1999 Counts, Donut Type 1000 Pf Piezo-Crystal , Colorimeter : Digital Photo Colorimeter 8 Filters, Mains Operated Using Latest Microcontroller, With 2½ Digit Led Display, Sample Size 1Ml. Auto Zero Using Touch Keys. , Uv – Vis Spectrophotometer ( Double Beam ) Wavelength Range : 190-1100Nm Spectral Bandwidth : 1 Nm Optical System : Double Beam, Blazed Holographic Grating ( 1200 Lines / Mm ) Wavelength Accuracy : ±0.5Nm Wavelength Repeatability : =0.2Nm , Auto Analyzer:The Machine Should Have The Provision Totest Like Sgpt, Lipid Profie, S. Creatin, Blood Cholesterol, Etc. , Electrolyte Analyzer : 1. Designed For 3 Electrolytes Analysis: Na+, K+, Cl- 2. Low Reagent Consumption Per Test. 3. Aspirates Whole Blood, Serum, Urine And Other Biological Fluids. 4. Requires Very Low Sample, 40Ul For 2 Electrolytes. 5. Throughput 60 Samples / Hour 6. Graphic Display With Touchscreen. 7. Automatic Calibration And Rinsing. 8. Inbuilt Thermal Printer 9. Real Time Clock 10. Memory For Sample Results 1000 11. Iso, Gmp And Ce Mark Certified Products. 12. High Linearity For Parameters. Sodium = 40-220 Mmol / L Potassium = 1 - 30 Mmol / L Chloride = 20-250 Mmol / L , Blood Gas Analyzer : Should Be Able To Measure Directly Ph, Pco2, Po2, Sodium, Potassium, Chloride, And Calcium Simultaneously. Calculated Parameters Include Sa02, Bi-Carbonate ( Hco3 ) , Standard Hco3, Base Excess Of Blood ( Be ) , Base Excess Of Extra Cellular Fluid. Should Have An Automatic Calibration For All The Measured Parameters. Should Have An Inbuilt Printer And Minimum Inbuilt Memory Of 100Samples. Fast Analysis Time -Less Than 60 Sec. Data Display On Well-Illuminated, Adequate Size Lcd Color Touch Screen Display. Data Print Out On Built In Graphic Printer. Should Be Supplied With On L I N E Pure Sine Wave Ups Of Sufficient Capacity For A Minimum Back Of 30 Minutes. Al Types Of Electrodes Supplied Initially Shall Have One Year Warranty. Reagents Supplied Should Have At Least Six Months Shelf Life. , Medical Oxygen Sensor : Measurement Range: 0-100%, Output In Ambient Air: 9-14 Mv, Operating Temperature: 0-50°C, Operating Humidity:0-99 Rh , Blood Cell Counter : White Blood Cells, Red Blood Cells And Platelets Are Counted Using The Direct Impedance Method With Coincidence Correction. Automatic Floating Discriminators Separate The Cell Populations Based On Complex And Accurate Algorithms. The Intensity Of The Electronic Pulse From Each Analyzed Cell Is Proportional To The Cell Volume. Principle Electrical Impedance Method For Cell Counting And Cyanide - Free For Hemoglobin Parameters Wbc, Lym#, Mid#, Gran#, Lym%, Mid%, Gran%, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Sd, Rdw-Cv, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Histograms Wbc, Rbc, Plt Throughput 60 Samples Per Hour , Clinical Thermometer ( Mercury Clinical Thermometer ) Range : 0-250°C , Digital Clinical Thermometer, Accuracy 0.1 Deg. C ( Min ) , Display. Human Body Non Contact Infrared Thermometer, Accuracy 0.1 Degree C, Lcd Display. , Infrared Clinical Thermometer: Human Body Noncontact Infrared Thermometer, Accuracy 0.1 Degree C, Lcd Display. , Stethoscope High Acoustic Sensitivity, Stainless Steel Combination Chest Piece Signify Quality. Soft-Sealing Ear Tips Offer Maximum Comfort And An Excellent Acoustical Seal. , Digital Stethoscope ( Phonocardiogram Trainer ) Pcg Amplifier With 5 Filters Phonocardiogram Amplifier With 5 Filter Trainer Kit Real Time Amplified Pcg Output Up To 15Vpp±, Pcg Transducer. Adjustable Gain & Adjustable Audio With Head Phone. Rotary Switch To Select 5 Positions Filter. Filter Range 25Hz To 1400Hz±, Heart Beat Indication. Output Pcg Through 4Mm Socket. Test Points On The Top Of Instrument Output Through 2Mm Socket. Power Supply 230V, 50Hz. Dimensions 250 X 75 X 250 Mm ± Study On Skrip Pcg Amplifier Study Of Phonocardiogram ( Or Pcg ) Is A Plot Of High-Fidelity Recording Of The Sounds And Murmurs Made By The Heart With The Help Of The Machine Pcg. Study Of Heart Sound & Murmurs. Study Of The Condition Of The Heart. Study Of Heart Sound For Analysis Provides Good Information Of These Diseases- Cardiovascular Diseases. Study Of Rhythmic Beating Of Heart. Study Of A Sound Referred To As “Lub- Dub” . Study Of The Atrio-Ventricular And The Aortic-Pulmonic Valves , Sphygmomanometer : Aneroid Type Sphygmomanometer , Electromyography ( Emg ) With Simulator Trainer : Emg Amplifier 3 Lead With Simulator Bipolar Real Time Emg Amplifier 3 Lead With Audio & Simulator Trainer Kit Real Time Emg Wave Measurement, Unipolar & Bi-Polar Mode Disc Electrodes With Velcro & Disposable Electrodes, Emg & Self Test Mode, Gain & Test Adjustable.Dso Output Through 4Mm Sockets Audio Output Cw 1Wat ±., Test Point On The Top Of Instrument 2Mm Sockets Simulator Differential 3 Led As Active, References & Common ( Ground ) . Adjustable Conduction I.E. Voltage & Time Response I.E. Frequency. Universal Output Sockets, Multiple Pattern By Adjustment Of Voltage & Frequency. Study On Skrip Emg Amplifier Study Of Electric Potentials Generated By The Muscles, Muscle Activity, Nerve Conduction Velocity, Muscle Feedback, Muscle Strength & Signal Processing Placement Of Electrodes, Amplification, Filters, Gain, Self Test, Voltage & Frequency Responses, Simulator & Etc Power Supply 230 V, 50Hz. Dimensions 305 X100 X 250 Mm± , Online Ups :Max-2Kva 72V Pure Sine Wave Without In-Built Batteries, Multicolor , Computed Radiography System : Computed Radiography System , Maintenance Tools Kit Box:Box Contain: 3-3 / 4 Auto Range Digital Multimeter, 23Pcs 1 / 4 Driver Socket Set, Heavy Duty Curved Claw Hammer W / Fiberglass Handle, Adjustable Wrench 8, Ci Extractor, Hobby Vise, Slip-Channel Pump Pliers 254Mm, 12-15 Nos Prosoft Screw Driver Set, Wire Stripper &Cutter, Fine Tip Straight Tweezer, Utiliyu Component Storage Box, Long Nose Plier 135Mm, Diagnoal Cutting Plier 110Mm, Linemans Plier 165Mm, Dual Color Cutting Plier, Dual Color Long Nose Plier, 9 Pcs Ball Point Longarmhex Key Set, 10Pcs Electronic Combination Wrench, 5 Pcs Needle Filr Set, Soldering Iron 220 V, Desoldering Wick, Solder Core, Vs Insulated Tap, Utility Knife, Measuring Tap; Desoldering Pump, Flux Bottle, Blow Brush, Telescopic Magnetic Pick Up Tool, Inspection Mirror, Al Purpose Snip Etc, , Hay, Sbridge Trainer Kit : Inductance Measurement Range: 50Mh To 150Mh Product Description Hays Bridge Trainer Is Used To Design Hay’S Bridge, Which Determines The Value Of Unknown Inductors ( L ) . The Students Can Balance The Bridge Either By Observing Waveform On Cro Or By Using The Built In Speaker. This Kit Has Been Designed Keeping Students In Mind So Its Very Easy To Understand And Use. Details:- Inductance Measurement Range: 50Mh To 150Mh. On Board Oscillator Section. On Board Circuit For Designing Hay’S Bridge On Board Amplifier Section On Board Unknown Inductors For Conducting The Experiment On Board Speaker Interface Test Points Are Provided To Analyse Signals At Various Points On / Off Switch And Led For Power Indication. Bare Board Tested Glass Epoxy Smobc Pcb Is Used. Block Description Screen Printed On Glassy Epoxy Pcb All Interconnections Are Made Using 2Mm Banana Patch Cords Supplied With User Manual And Patch Cords With Built-In Power Supply Enclosed In A Wooden / Plastic Box , Anderson’S Bridge Trainer Kit : This Is Useful For Students To Determination Of Self Inductance Of A Coil By Anderson’S Bridge. Features • Stand Alone System • Inbuilt Audio Frequency Generator • In-Built Stable 3.5 Character Digital Meters • 0-20 V Variable Power Supply •Easy To Learn And Illustrative Study Materials • Attractive , Durable And Insulating Wooden Casing. Technical Specifications On Board Dc Power Supply : +12V Dc Ammeter Range : 1?A To 200Ma Display : 3½ Digit Voltmeter Range : 1Mv To 200V Display : 3½ Digit Mains Power : 230V Ac ±10% , De Sauty Bridge Trainer Kit : This Is Useful For Students To Determination Of Self Inductance Of A Coil By Anderson’S Bridge. Features • Stand Alone System • Inbuilt Audio Frequency Generator • In-Built Stable 3.5 Character Digital Meters • 0-20 V Variable Power Supply •Easy To Learn And Illustrative Study Materials • Attractive , Durable And Insulating Wooden Casing. Technical Specifications On Board Dc Power Supply : +12V Dc Ammeter Range : 1?A To 200Ma Display : 3½ Digit Voltmeter Range : 1Mv To 200V Display : 3½ Digit Mains Power : 230V Ac ±10% , Flex Displays ( With Printing Charges ) : 2 Ft X 1.5 Ft , Wall Clocks : Digital , Boyle’S Law Apparatus : Burrete Graduated In C ( Or Ml ) With 1.0 C / Div. Scale Graduated Onboth Sides ( Left & Right ) With Same Marking. Both Open And Closed Tubes Can Be Slided Up And Down Over Aluminium Rod. High Quality Synthetic Tube ( 1.0 M Long ) . One Spare Synthetic Tube. ( With Extra 500Gm Mercury ) . Superior N & Closed Ytpe Eno Meter Onlg Kaet Wood Board No Heavy Metal Base Fitted With Leveling Screws Without Mercury But Complete Whti Pressure Rubber Tubing &Glass Tubes, Routine Quality, Double Rod With Open &Closed End Tubes & Pressure Tubing. , P-N Junction Diode Characteristic Kit : Complete Set With Inbuilt Power Supply & With Digital Voltmeter & Ammeter Compatible For Both Forward & Reverse Bias. , Galvanometer With Resistance Kit ( Half Deflection Method ) :Galvanometer Is Designed For Very Low Current Measurement, Resistance 100 H / 500 , Time Period 10S To 15S, Large Moment Of Inertia Of The Moving Part, Deflection Closely Proportional To The Electric Charge. , Verification Of Kirchhoff’S Law Kit : Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance 1-, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 20V, Number Of Led Indicators Available To Indicate Power Input -1, Availability Of Cd Voltmeter Available On Board -Yes, Range Of Dc Voltmeter - 0-30Volt, Availability Of Dc Ammeter On Board- Yes, Range Of Dc Ammeter - 0-50 Ma, Number Of Test Points Provided Onboard To Observe Signals - 14, Necessary Patch Cords. Available For Interconnection- Yes, Casing Material - Plastic. Two Round Analog Meters For Voltage & Current Measurement, Components Are Mounted Behind The Panel With Printed Circuit. Diagram, Connections Are Brought With 4 Mm Banana Sockets, Instrument Fitted In Highly Shockproof Plastics Box, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Student Instruction Manual Will Be Provided With The Trainer Kit. , Stoke’S Law Apparatus : Hard Glass Tube Of 35 Mm Dia & 1M Long Marked Ni Least Division Of Mm Is Made To Stand Firmly In Between Two Upright Bars With The Help On A Heavy Cast Iron Base At The Lower Side, For Viscosity Measurement, Transparent Liquid Like Glycerine Or Castor Oil To Be Supplied, Digital Stop Watch And Stainless Steel Balls Of Different Dia To Be Supplied. , Spherometer : A Fine Screw Moving In A Nut Carried On The Centre Of A Small Three-Legged Frame, The Feet Forming The Vertices Of A Equilateral Triangle. , Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup : Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup Stand With Heavy Base, Transparent Scale With Mm Resolution, Horizontal Support For Spring, Brightly Colored Stretch Indicator, Three Springs With Identical Diameter And Length, But Different Spring Constants, Three Fo Each Spring Included, For A Total Of Nine Springs: Spring Constants Are 5N / M, 8 N / M, 07 N / M. Consisting Of 45Cm Long Mirror Scale, Spring, Slotted Weight With Hanger And Pointer, Complete On Heavy Tripod Stand, On Metal Stand With Mirror Scale, Superior On Heavy Base, About 05Mc High For Taking More Readings, Complete With Weights, Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm. Weight Complete With Hook For Hanging. , M.I. Of Flywheel Apparatus :M.I. Of Flywheel Apparatus Good Quality Stainless Steel Full Setup, Csi Superior Quality Flywheel With Weights, Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets, Thickness: 4.4 Cm, Diameter:20 Cm, Wall Type With Pointer, With Revolution Counter, Set Of Slotted Weights For Flywheel Complete With Weights Cord And Hook. , Coefficient Of Linear Expansion Apparatus: Superior Quality, Height 50 Cm, With Brass Rod, Stainless Steel Finish A50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor. Three Metal Tubes - Brass, Copper ( 99.5%Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point. Thermoplastic Elastometer Tubing With 2 6.4 Mm I.D.A Source Of Steam Or Hot Water, Such As The Pasco Model Td- 8556A Steam Generator. A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords. , Time Period Of Vibration Of Cantilever : Steel Made Cantilever Beam Clamped At The Table, Free End Fitted With Hook To Suspend Weights, Complete Set With Digital Stopwatch. , Proof Of Inverse Square Law By Photo Electric Cell :Proof Of Inverse Square Law By Photo Electric Cell Complete Test Kit With Optical Bench Mounts For P.E. C E L L& Source Of Light, Galvanometer Of Low Resistance To Measure Current. , Dependence Of Capacitance Of Parallel Plate Capacitor: The Fixed And Mobile Plate Is Highly Insulated. The Solid Aluminum Plate Capacitor Around 150Mm Diameter And 3Mm Thick. The Capacitance Si Adjustable From 2.3 To 280Pf. Ti Consists Of A Fixed And A Movable Plate On A Guide Rail. A Centimeter Scale Is Used To Read The Plate Spacing. The Device Si Supplied With Three Dielectric Sample Plates Made Of Acrylic, Pvc. , G Clamp 100Mm , Instrument To Observe The Effects Of Frictions Using Inclined Plane Consisting Of A Wooden Plane 90X18cm Having Adjustment Ofr Setting The Required Angel Precisely Complete With Frictionless Pulley Linear And Circular Scale Nap B O T T O M Fo Different A Wheeled Trolley Dnaa Materials. , Stainless Steel Led Digital Outside Micrometer: Digital Micrometer Outside.0 - 25 Mm L.C. 0.001 Mm. , Conversion Of Galvanometer Into Voltmeter Kit :Conversion Of Galvanometer Into Voltmeter Kit Type Of On-Board Meter Available - Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - , 1 Number Of Variable Dc Power Supply Available On Board- 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available No Board- Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic. , Conversion Of Galvanometer Into Ammeter Kit :Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard Ot Vayr Load Resistance - 1, Mruneb Ovfariable Cd Power Supply Available On Board - , 1 Number Of Led Indicators Available Ot Indicate Power Niput - 1, Availability Of Dc Voltmeter Available No Board - Yes, Availability Of Dc Ammeter On Board -Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic. , Dc Digital Ammeter Range: 0-10V , Dc Digital Voltmeter Range: 0-20V , Analog Galvanometer : Dc Galvanometer Analogue For Lab 30-0-30V Portable For Detecting And Indicating An Electric Current. , Small Resistances Range : 5O, 10O , Dc Digital Multimeter : Multimeter Digital 3Digit Lcd- Dc Voltage Up To 1000V In Five Ranges, Ac Voltage Up To750v In Five Ranges, Dc Current Up To 10A In Five Ranges, Ac Current Up To 10A Ni Five Ranges, Resistance Upto 200M Ni Seven Ranges With Buzzer.
Contract Date: Aug 18, 2025 Contract Value : ₹ 1.34 Crore
Government Departments No of Bidders 8
West Bengal View Result →
38.
Housing Urban and Rular Development #7671024 AOC
Tender For Up-Gradation Work Of Tourism And Cultural Office At Collectorate Council In District-Firozabad, 1 Providing & fixing solid 3.0 m height panneling in frame work of 750 x 750 mm (horizontally and vertically) comprosong of 50x50 mm thicksoft wood sction with 12 mm thick plywood finished with 1 mm laminate over 6 mm plywood of matching laminate colour. All complete in direction of Architect/Engineer in charge. 2 Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The wall panel shall be backed by a Manufacturing Test Certificate. The fibre glass substrate shall have a recycle content of 85%. 3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 4 Finishing walls with 100% Premium acrylic emulsion paint having VOC loss than 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Trnted) with silicon additives. New work (Tow or more coats applies @ 1.43 litre 10 sqm Over and including priming coat of exterior primer applied @0.90 litre/10sqm 5 Providing and fixing 12mm thick frameless toughened glassdoor shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) 6 Brick work with (non modular) bricks of class 150 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 course sand) 7 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in grith and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand (a) Providing and fixing water proofing materials in cement mortar for plastring or in concrete work in the proportion recommended by the manufacturer. 8 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqm 9 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete 10 Providing and supply ofHigh Back chair,Mettalic PP Cushion Arm , Torsion Bar , Gas Lift , Metallic Powder Coated Metal Base,Leatherlite Tapestry (Geeken/ Featherlite/Modern or Equivalent) (GP 109) etc all complete in direction of Architect / Engineer in charge. 11 Providing and supply of Medium Back Chair, Injection Moulded Back, Mesh back, PP Arm,Swivel Tilt, Gas Lift, Nylon Base, Seat Cushion Fabric Tapestry & Cover (DERBY 2) etc all complete in direction of Architect / Engineer in charge. 12 Providing and supply of Visitor ChairMesh back, PP Arm,Swivel Tilt, Gas Lift, Nylon Base, Seat Cushion Fabric Tapestry & Cover (GA 550A) etc all complete in direction of Architect / Engineer in charge. 13 Providing and supply of 2 Seater Sofa With Wooden Frame, Chrome Plated Leg, Fabric Tapestry ,Size in mm - 1860 (L) X 760 (D) X 760 (H)(Geeken/ Featherlite or Equivalent-ROSEMOUNT 2 /Modern or Equivalent) 14 Providing and supply of 3 Seater Sofa With Wooden Frame, Chrome Plated Leg, Fabric Tapestry ,Size in mm - - 2400 (L) X 760 (D) X 760 (H)(Geeken/ Featherlite or Equivalent-ROSEMOUNT 3 /Modern or Equivalent) 15 Providing of 1200X600 MM Central Table , SS Pipe Frame Chrome Finish , PLPB Edge Banded Top , 18mm Thick , marino 10858 Colour (ADMIRE) (haffele/Doorset or equivalent) as per direction of Architect in charge . 16 Providing of 600X600 Corner Table 15mm PLPB Top, Annodize Aluminium Section frame (12500) (haffele/Doorset or equivalent/ Modern) as per direction of Architect in charge . 17 P & F of laser cut corian logo on rear wall with back lighting (1M X 1 M) etc all complete in direction of Architect / Engineer in charge. 18 Providing and Installation of Vertical Blinds in wiindows all complete in direction of Architect / Engineer in charge. 19 Providing and Installation of Acrylic Signage with lettering and Backlit in Exterior wall all complete in direction of Architect / Engineer in charge. 20 Providing and Installation of storage rack 900X450X2100 with wooden storage, particel and MDG structure and side glass door as per direction of Architect in charge, (GEEKEN storage 10/ haffele/Doorset or equivalent/ Modern) 21 Providing and Installation of storage rack/pigeon hole 900x450x750 with pigeon hol, particel and MDG structure as per direction of Architect in charge, (STORAGE 6 / Featherlite/Modern or Equivalent) 22 Providing and Installation of Conference Table, Particle board and MDF top,(Without Flip-Up Box) W4500 X D1500 X H750etc all complete in direction of architect in charge. CONFERENCE 5 MEBMRANE MODULAR CONFERENCE TABLE (Geeken/ Featherlite/Modern or Equivalent) 23 Providing ofExecutive Table, PLPB Top or Flaper Box, Extruded aluminium Profile W1800XD1750X750 as per direction of Architect in charge .(Geeken/ Featherlite/Modern or Equivalent) (Evoke) 24 Providing ofExecutive Table, PLPB Top or Flaper Box, Extruded aluminium Profile W1800XD1750X750 as per direction of Architect in charge .(Geeken/ Featherlite/Modern or Equivalent) (NUMERO 6) 25 Providing ofExecutive Table, PLPB Top or Flaper Box, Extruded aluminium Profile W1800XD1750X750 as per direction of Architect in charge .(Geeken/ Featherlite/Modern or Equivalent) (NUMERO 7) 26 Supply Installation Testing & Commisionning of Passive 2 way bass reflex,TRANSDUCER COMPLEMENTS: LF 1 x 4 woofer POWER TAPS 100V - 2.5W, 5W, 10W, 20W (Make -Bose , Sonodyne , Bosch ) 27 Supply Installation Testing & Commisionning of Mixer Amplifiers, now featuring 2 channels of priority VOX muting, integrated tone generator, OUTPUT POWER PER CHANNEL -250 watt, FREQUENCY RESPONSE - 40Hz - 20kHz, OUTPUT MODE - 4 Ohm- 100V , THD+N < 0.2%, INPUT CHANNELS - 4 MIC or Line, SIGNAL TO NOISE RATIO > 80dB, INPUT SENSITIVITY -MIC: 1.2mV - Line: 160mV (Make - Bose , Sonodyne , Bosch) 28 Mixer & MicrophoneSupply Installation Testing & Commisionning of 6 channel mixer (Make - Yamaha , Sonodyne , JBL ) 29 Supply Installation Testing & Commisionning of Sonodyne wireless microphones dual channel with one hand held & one lapel mike , carrier freq range 865-867MHz, S/N ratio > 105dB, Freq response 40 to 18000 Hz, sensitivity-105dB, working distance > 150 feet (Make - Shure , Sonodyne , Bosch ) 30 Supply Installation Testing & Commisionning ofBosch Gooseneck microphone condenser type unidirectional with flexible stem, phantom powered, voltage range 12- 48 Volts, sensitivity 2.5 mV/pascal, Freq 100 to 16000 Hz, output impedance < 200 Ohms. With Ahuja small stand Range(250ft) in optimal conditions Modultion : GFSK with TDMA, voltage 3.7 . (Make - Shure , Sonodyne , Bosch ) 31 Cables & Accessoories :-Supply Installation Testing & Commisionning of 2 core sheilded microphone wire. MICROPHONE CABLE 2 CORE +SHIELDED 19/0.12 OFC+ PVC 2C + COTTON YARN 06 MM (Make - Crystal , felcon , belden 32 Supply Installation Testing & Commisionning of 2 core x 1.5 sq mm speaker wire (Make - oxycraft , felcon , delden ) 33 Supply Installation Testing & Commisionning Misc Connectors , Microphone Connectors Boxes , Patch cables for entire installation 34 Supply Installation Testing & Commisionning of 18U Equipment for backend system for Equipment Rack (Make - Comrack , Valrack , Legrand ) 35 Video Projection System :-Supply Installation Testing & Commisionning of Laser Projector,WUXGA resolution (1,920x1,200) , 5000 ANSI Lumenns ,Contrast Ratio 3,000,000:1, Zoom , Focus &Lens Shift , (Make - Sony , Epson , LG ) 36 Supply, Installation testing & commissioning of 150 diagonal motorized screen with aspect ratio of 16:9, complete with all standard accessories as per the tender specification (Make - Liberty , Suvira , Prima ) 37 Supply Installation Testing & Commisionning of HDMI PLATE 38 Supply Installation Testing & Commisionning of HDMI Switch (2x1) (Make - Aten , Milestone , Kramer ) 39 Supply Installation Testing & Commisionning of HDMI WIRE ( 1 M) 40 Supply Installation Testing & Commisionning of HDMI WIRE ( 5 M) 41 Supply Installation Testing & Commisionning of HDMI WIRE ( 15 M) 42 Supply Installation Testing & Commisionning of Audio Embader (Make - Aten , Milestone , Kramer ) 43 Supply Installation Testing & Commisionning of Projector Lift (Make - Liberty , Suvira , Prima ) 44 ELECTRICALWiring point for light with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backalite sheet etc.complete in all respect as directed including matching colour wash. 45 Wiring point for plug with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipe Partly concealed in the wall and partly Laid in slabalong with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & socket etc.complete in all respect, as directed, including matching colour wash. 46 Supply fixing & concealing ofPVC conduit in the wall including cutting of brick laying of conduit & fixing it with MS hooks & then plastering.with cement, sand,mortar finished to the level,with matching colour wash including cost of proper thrading of conduit and providing necessary socket ,bend & chucknuts,as directed by engineer incharge with the supply ofmaterial labour and T&P required for proper completion of work. Size 20 mm dia(2 mm) thick PVC Conduit 47 Wiring point for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strand copper conductor cable. (drawn through existing concealed PVC conduit) and ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. 48 Add for light /fan point with moduler type switch in place of piano type switch. 49 Add for plug point with moduler type switch in place of piano type switch. 50 Supply & wiring of submains with 2 nos.2.5 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. 51 Supply & wiring of submains with 2 nos.4 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 2.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. 52 Supply & wiring of submains with 2 nos.6 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 4 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. 53 Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect. 54 Aesthetically designed LED linear fixture suitable for suspended down type with housing made of high quality extruded aluminium alloy including die-cast aluminium end cap. These series are also available with seamless continuous lighting system ensuring no visible dark spot or light leakages(Philips/Havells/Panasonic) as per design approved by architect incharge. 55 Supply and Installation of 5M LED Strip of 24W Output with 20000 hours and 3000K & 6500K(LED STRIP SKYCOVE 5M CDL WITH DRIVER) 56 Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.BEE 5 Star rated-1200 mm sweep 57 Supplying, erection, connecting, testing and commissioning of 450 mm Wall Fancomplete in all respect. 58 Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. 59 Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. 60 Supply and fixing of surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. 61 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. 62 Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P etc.required for proper completion of work. 63 Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 64 G.S.T Extra as per applicable
Contract Date: Jul 22, 2024 Contract Value : ₹ 27.80 Lakh
Government Departments No of Bidders 2
Uttar Pradesh View Result →
39.
Housing Urban and Rular Development #7636343 AOC
Tender For Dd - Mumbai City-Marol (Mmr Zone- I) Industrial Area...Dc Work… Refurnishing Work Of Mitl Office At B Wing First Floor In Udyog Sarathi, Andheri - Demolition & Civil works 2 Removing doors and windows with frames and stacking thematerials as directed withall leads, lifts etc. complete. 3 Removing wooden, glass or A.C.partition including frame work and stacking the materials as with all leads, lifts etc. complete. 4 Removing false ceiling in all types of ceiling i.e. Gypsum, Accoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts. 5 Dismantling Brick Masonry in lime or cement mortar and stacking the material as directed with all leads & lifts complete. 6 Removing the existing cement plaster with POP/Putty of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. 7 Removing brick bat coba including stacking the spoils as directed with all leads, liftsetc, complete. 8 Removing cement tiles, or marble or polished shahabad floor or dado or platform without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 9 Dismantling old electrical fixures of all types i.e. switch boards, lights, smoke detectors etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. 10 Dismantling old sanitary fixures of all types i.e. W.C., urinals, wash basin etc. including its pipes and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. 11 Dismantling old Sprinkler Sysytem and Air condition (any types) unit indoor, out door, all types Ducting, Grills,diffuser,fastner,rods,of all types of various sizespipes Fexible pipes, etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. 12 Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. 13 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 14 Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etc. complete. 15 Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. 16 Providing and laying in position Cement Concrete 1:3:6 (one cement : 3 coarse sand : 6 graded stone aggregates of 12/20 mm nominal size). transported to site of work in Mannulfor all leads and lifts on 5th floor, having continuous agitated mixer, Mamanufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the EIC/Architect. 17 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 18 Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 19 Providing and laying 4 mm to 6.5 mm thick PVC plank flooring of approved make,made of 100% virgin PVC/ SPC backing with minimum 0.30 to 0.50 mm thick wear layer in required design and pattern in linear and curvilinear portions of the building. The planks are to be connected with glue free click connect joinery system and junction of the adjoining floors are to be finished with T or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturers specifications. The entire work is to be completed as per the direction of the EIC/Architect. 20 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. 21 Providing & fixing 100% Nylon based solution dyed tufted loop pile carpet tiles of approved size, make & pattern having minimum pile weight of 600 gm per sqm and minimum pile thicknesss of 2.5 mm in flooring over smoth & damp proof base using rubber based adhesive of approved quality & make completewith T or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturers specifications. The entire work is to be done as per manufacturers specifications & directions of the EIC/Architect. Basic rate of Carpet: Rs.1800/- Per Sqmt 22 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm / 300 x 600 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete 23 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 24 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 25 Sub Estimate No. 2 - Plumbing Works 26 Providing and fixing chlorinated Poly Vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 mtr spacing.This includes jointing of pipe 27 15mm nominal OD pipe 28 20mm nominal OD pipe 29 Providing and fixing 15 mm dia Piller cock with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. 30 Providing and fixing European type commode including outlet, inter connections through walls including all fittings etc. complete.As per direction of Engineer - in - Charge. 31 Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. 32 Providing and fixing in position UPVC Nahani Trap includingSS grating,fixing in cement concrete M-15 etc. complete.. b) 110 mm. size 33 Providing and fixing soap dish with all types of fixtures including labour charges including transport charges etc. complete. 34 Providing and fixing 15 mm dia 2 Way BIB cock long body with flange,guarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge. 35 Providing and fixing Jet Spray withguarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge. 36 Providing and Fixing of Mirrors in TOILETS of approved Indian quality,with under layer foam (hitlon) with S.S.bracket /studs 12mm thickdia top & bottom in the masonry etc. complete.As per direction of Engineer - in - Charge. 37 Supplying, Providing and fixing in position of approved make first quality, recessed, roller type or box type white glazed toilet paper holder 150 mm x 150 mm size etc. 38 Providing and laying UPVC pipes of standard make in line and level including necessary labour, bends, tees, fixtures etc. and testing the pipes complete. 39 100 mm diameter 40 75 mm diameter 41 62 mm dia 42 Providing and fixing Chromium Plated Alluminium Towel Rail 750 mm (26) long, 20mm (3/4) dia and of approved quality fixed on chromium plared bracket including providing teak wood gutties in masonry etc complete as per direction of Engineer - in - charg 43 Providing and fixing 15 mm dia Angle cock with guarantee against any manufacturing defect including socket, union nuts etc complete as per direction of Engineer - in - charge. 44 Providing and fixing in position Double coat hooks as per instructions from EIC/Architect 45 Providing and fixing in position Hand dyrer as per instructions from EIC/Architect 46 Providing and fixing in position SS sink for kitchen / pantry as per instructions from EIC/Architect 47 Providing and fixing 15 mm dia Piller cock for Sink with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. 48 Providing and fixing in position CP brass concealed stop-cock with adjustable wall flange etc., complete as per drawings and instructions of EIC/Architect. 49 Providing and Fixing White glazed vitreous Chinaware urinals with integrated sensor including all fittings like CP brass flush pipe, CP brass spreaders with unions and clamps (all in CP brass), CP brass waste coupling 40 mm dia, inlet connection, concealed Z CI brackets etc., all complete including cutting and making the good the walls and floors wherever required as per the architectural drawings, manufacturers specifiaction and as directed by the EIC / architect complete in all respects. 50 Providing and fixing frameless urinal partition of approved make made of 8 mm thick toughned glass. Rate includes patch fittings etc., as directed by the EIC / Architect. 51 Providing and fixing in position brass heavy duty gate valve 20 mm dia of zoloto make confirming to IS:778 with sockets, nuts and bolts etc., complete. 52 Sub Estimate No. 3 - Painting work 53 Providing & Applying Plaster of Paris Punning in average 12 to 25mm thickness to walls, ceiling, beams & columns to bring the surface in plumb Line & Level including making the surface smooth, providing required grooves on top of skirting etc. complete as per directions of Engineer - In - Charge. 54 Providing & Applying superior quality of Luster Paint of approved make & shade, using roller to get approved textured surface in 3 or more coats including preparation of surfaces, applying cement primer of approved make & shade etc. complete as per directions & manufacturers specifications & instructions of Engineer - In - Charge. 55 Providing and applying plastic emulsion paint conforming to IS:5411-1991 part I of superior quality of approved make, colour and shade to the old & new surfaces in two coats over primers, including scaffolding, preparing the surfaces to receive the paint and applying putty etc. complete. 56 Finishing with Multi surface Zinc paint After surface preparationapplyingone or more coats of zinc based coat comprising of Zinc powder mixed with suitable medium in proportion1: 2 (One part of medium : 2 parts of zinc powder)@ 2.5 litre/10 sqm or as directed by Engineer-in-Charge andone coat of special primer applied @ 0.75 ltr /10 sqm over zinc coat. Top layer with two or more coats of approved luster paint/multi surface paint @ 1.25 ltr/10 sqm including preparation of surface even and smooth etc complete as per direction of Engineer-in-Charge 57 Providing and applying wash able oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. 58 Sub Estimate No. 4 - Carpentry Works. 59 Providing and fixingin position Aluminium Frame Work of Square hollow sections of given size for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect. 60 Size 50 x 25 x 1.62 mm 61 Size 50 x 50 x 1.62 mm 62 Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. 63 9mm thk Marine plywood 64 12 mm thk Marine plywood 65 19 mm thk Marine plywood 66 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 30 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. 67 Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish, molding, lipping patti of all size etc and any material required to complete works as per the direction by Architect. (Basic Rate for veneer: Rs.180 per sft.) 68 Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.) 69 Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels3) Shutters made out of 19 mm thick block board &6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside &4mm thk veneer out side as per below mention, hardwares such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, towerbolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevelation will be measured for payment. 70 Full height storage with veneer finish (FST) 71 Low height storage with Veneer finish (LST) 72 Over Head Storage with Laminate finish 73 Consul-unit 450MM Deep. 74 Full height storage with Laminatefinish (FST) 75 Low height storage with Laminatefinish (LST) 76 wardrobe storage 77 Compactor 78 Storages Providing & fixing in position 460 mm deep storage/Wardrobe unit alongwith partitions etc with 1) sides, top, bottom shelves made out of 19 mm marine plywood for all inside surfaces 2) 6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick ply finish with material & 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish. 4) hardwares such as heavy duty hinges, brass body locks (Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 3 coats of french polish. The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect. 79 Sub Estimate No. 5 -Doors & Windows Works 80 Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. 81 Providing and fixing best quality superior Indian teak wood frame for doors, windows and ventilators including all moulding, rebating, jointing, hold fasts of MS flats of minimum size 20 x 3 mm, having length of 225 mm for doors & 150 mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete. 82 Providing & fixing 35mm thk. Phenol bonded Flush door finish with one side 1.5 mm thk. Laminate and one side 3 - 4 mm thk Veneer as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. 83 Providing and fixing trap door made of aluminumpowder coated inner/outer frames/corner fittings finished with gypsum board liner,sealing strips between inner and outer frames including concealed hinges, snap touch latch etc., complete. with 50x50mm alu.frame work support from ceiling to the trap door .The entire item is to be completed in totality as per manufactures specifications and directions of the EIC/Architect. 84 Providing & fixing 35mm thk. Phenol bonded Flush door finish with 3 - 4 mm thk. Veneer on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. 85 Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 12 mm toughened glass approved beading, grooves, approved moulding including necessary hardware, approved adhesive, fitting & fixture Handel, Lock, Floor Spring etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-incharge. 86 Providing & fixing 35mm thk. Phenol bonded Flush door finish with 1 mm thk. Laminate on both sides as per approved designs. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, Panic door Handel, latches etc. as required. 87 Sub Estimate No. 6 -False Ceiling 88 Providing & fixing in position Gypsum Board False Ceiling as per manufacturers specifications & instructions with 12.5mm thick Gypboard Screw-fixed to the underside of suspended G.I. grid. G.I. grid should be constructed & suspended from the main ceiling as per manufacturers instructions & specifications.G.I.grid should consist of ceiling sections at maximum centre to centre distance 450mm, Perimeter channel intermediate channels at maximum centre to centre distance 1200mm. The ceiling sections should be fixed to intermediate channels with connecting clips. G.I.grid should be fixed to R.C.C. slab above with the help of 25mm x 0.5mm strap hanger & soffit cleat. The joints between soffit cleat & strap hanger and G.I.grid & strap hanger should be with 6.4 x 12.7 mm nut & bolt. Soffit cleats should be fixed to R.C.C.ceiling with W.E. type 12mm dia, 17/16 long steel Rawl plug maximum center to center distance (both ways) of strap hangers should be 1200mm. The Gypboard should be fixed to G.I.grid with 25mm long Drawall screws. 89 Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Optra (Microlook) EDGE TILES WITH ARMSTRONG 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 66% GW & 74% RW%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2.Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warranty. (Contractor should submit a performance certificate from Armstrong /Ecophone). 90 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, 91 Providing and fixing Wooden rafter at ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge 92 Providing and fixing Wooden ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge 93 Sub Estimate No. 7 -Loose Furniture 94 Providingandfixinginposition Meeting Room Table of approved shapeshownindrawing.Tabletop made out of 19 X 19 mm & 50 X 38 mm T.W. frame work with both side 6mm thk marine plywood in two layers finished with approved veneer. Apron made out of 50 X 50 mm T.W. frame work with both side 9 mm thk marine plywood finished with approved Veneer. Edge of Table finished with 50 X 50 mm T.W. mouldingwithmelaminepolish. Footrest&skirtingmadeoutof19 mm thk marine plywood finished with approvedVeneer.Edgeoffootrest finished with 25 mm thk wooden half roundmouldingwithmelamine polish.50x50mmwooden connectingmembers.Rateincluding cost of wooden beadings, mouldings, inlays,etc.Topshouldbefinished with approved Veneer. Sides finished withapprovedveneer&melamine polish.completeasperdetail drawing, as specified and as directed by Architect. 95 Providing & arranging in position ExecutiveCabinTableFinishedwith Veneer in table size 2500 mm x 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in19mmthk.Marineplywood includingsideunit,drawerunit,tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mminfront&12mmthkinrear& sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts&sidestobefinishedasper drawings.Thefrontmodestypanel etc shall be finished as per drawings &instructionsoftheEIC/Consultant all complete. All trays in writing desks,sideunitstohaveconcealed stoppers.Allpenciltraysshallhave smallcompartmentsforkeeping miscellaneous stationaries. All beadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching veneer all molding shall be finish in 3 coatsofmelaminepolish.Allthe tables shall have keyboard drawers to accommodatekeyboardsandmouse wherevernecessaryasperdrawing. Rateincludeofallhardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawingsandalsoshallincludeCPU unit as shown in the drawings approvedbyEIC.Noseperate payment shall be made for this. Tablesallexposedsurfacefinished with a approved veneer in approved pattern as per drawings. All exposed surfaceofsideunittobefinished with a approved veneer. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside & laminate from inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With veneer of approved shade and make. Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 96 Providing&arranginginpositionJt. ExecutiveCabinTableFinishedwith Laminateintablesize2500mmx 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk unitsin19mmthk.Marineplywood includingsideunit,drawerunit,tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mminfront&12mmthkinrear& sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts&sidestobefinishedasper drawings.Thefrontmodestypanel etc shall be finished as per drawings &instructionsoftheEIC/Consultant all complete. All trays in writing desks,sideunitstohaveconcealed stoppers.Allpenciltraysshallhave smallcompartmentsforkeeping miscellaneous stationaries. All beadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finishedwithaapprovedlaminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, withshelves,drawers,shuttersetc. asperdrawings,finishedwith approvedlaminatefromoutside& inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With laminate of approved shade and make.Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 97 Providing & arranging in position PA Cabin Table Finished with Laminate in table size 1300 mm x 600 mm x 750 mm) side table (size 900 mm x 450 mm x 700 mm) desk units in 19mm thk.Marineplywoodincludingside unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawerunitfronts&sidestobe finishedasperdrawings.Thefront modesty panel etc shall be finished as perdrawings&instructionsofthe EIC/Consultant all complete. All trays inwritingdesks,sideunitstohave concealedstoppers.Allpenciltrays shallhavesmallcompartmentsfor keeping miscellaneous stationaries. Allbeadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finishedwithaapprovedlaminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, withshelves,drawers,shuttersetc. asperdrawings,finishedwith approvedlaminatefromoutside& inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With laminate of approved shade and make.Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 98 Providing and placing in position ReceptionTableofrequiredshape andsize,vertical,topandbottom made of 19mm thk BWP marine grade plywood finished with approval Veneer on both side,the edge of top finished12x30MMthickmatching wood beading,the top finished in PU above 18mm thick glass top. The Reception table verticle,flap,Foot restarein19mmthkBWPmarine grade plywood finished with Approval Veneer internal side and external above6mmthicktoughfnedcolor back painted glass the edge of finished 12 x30 MM thick veneer matching beading. provision Flap shutter shall be provided for Services, electrical, cabling cutouts as per the drawing. All the exposed wood work are to be finished with three or more coatsmelaminepolish.Theentire item is to be completed in totality as per the drawing and directions of the EIC/Architect. 99 Providing & arranging in position Printer Table Finished with Laminate in table size 2000 mm x 600 mm x 750mm)deskunitsin19mmthk. Marineplywoodincludingsideunit, drawerunit,teatray,penciltray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawerunitfronts&sidestobe finishedasperdrawings.Thefront modesty panel etc shall be finished as perdrawings&instructionsofthe EIC/Consultant all complete. All trays inwritingdesks,sideunitstohave concealedstoppers.Allpenciltrays shallhavesmallcompartmentsfor keeping miscellaneous stationaries. Allbeadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finished with a approved laminate. 100 Providing & arranging in position Cabin Table Finished with Laminate in table size 1500 mm x 750 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in 19mm thk.Marineplywoodincludingside unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawerunitfronts&sidestobe finishedasperdrawings.Thefront modesty panel etc shall be finished as perdrawings&instructionsofthe EIC/Consultant all complete. All trays inwritingdesks,sideunitstohave concealedstoppers.Allpenciltrays shallhavesmallcompartmentsfor keeping miscellaneous stationaries. Allbeadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finishedwithaapprovedlaminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, withshelves,drawers,shuttersetc. asperdrawings,finishedwith approvedlaminatefromoutside& inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With laminate of approved shade and make.Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 101 Modularworkstationsconsistoflow ht. partition screen, work tops, Pedastalunit,filingstoarges(onlyin fewcases),keyboardtray&CPU trolleyasperspecifications mentionedbelow.Theprofilesofthe Aluminium partition frame should be as per the Work top - 25 mm hk. Pre laminated particle board cut to size & shapeasperdesign&drawings. Edges to be fixed with 2mm thk PVC edgebindingofapprovedmake& matching to laminate Key board tray &CPUTrolley-Eachworkstation shallhavePVCmouldedkeyboard tray&M.S.powdercoatedCPU Trolleywithcastors.Pedastalunit- 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made outof18/16mmprelaminated boardforcaracus&12mm prelaminated board for drawers. Top drawer to be on roller slides and two lowerdrawerstobeof3extens Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board andwhiteboard.Screeninfrontof the table to have frosted glass panel above 102 Modularworkstationsconsistoflow ht. partition screen, work tops, Pedastalunit,filingstoarges(onlyin fewcases),keyboardtray&CPU trolleyasperspecifications mentionedbelow.Theprofilesofthe Aluminium partition frame should be as per the Work top - 25 mm hk. Pre laminated particle board cut to size & shapeasperdesign&drawings. Edges to be fixed with 2mm thk PVC edgebindingofapprovedmake& matching to laminate Key board tray &CPUTrolley-Eachworkstation shallhavePVCmouldedkeyboard tray&M.S.powdercoatedCPU Trolleywithcastors.Pedastalunit- 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made outof18/16mmprelaminated boardforcaracus&12mm prelaminated board for drawers. Top drawer to be on roller slides and two lowerdrawerstobeof3extens Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board andwhiteboard.Screeninfrontof the table to have frosted glass panel above 103 Tea Table 900mm X 750mm X 450mm for m.s. ante chamber ProvidingAndFixingOfTeaTable 900mmX750mmX450mmWith 12mm Thick Colour Eitched Tempered GlassWithBevelledDrawingMade OutOf18mmThickWaterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. 104 Sub Estimate No. 5 - Chairs And Sofa Works 105 Providing & Arrangemnt of High Back,SynchronizedMechanismwith Multiple Locking, Adjustable Armrest, GasliftforSeatheightadjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 106 Providing & arrangemnt of High back chair - tilt mechanism with multilocking, high density cushion on seatcompositeleatherwithmetallic silver finish base and arms with P.U.castors, Gaslift for height adjustment. 107 Providing & arrangemnt of High back chair - tilt mechanism with multilocking, high density cushion on seatcompositeleatherwithmetallic silver finish base and arms with P.U.castors, Gaslift for height adjustment. 108 Providing & Arrangemnt of MId Back, NormalSyncroMechanism,Fixed Armrest , Gaslift for Seat height adjustment,Standard5-prong/Nylon Base with Leather Upholstery 109 Providing & Arrangemnt of Mid Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Seat height adjustment,Standard5-prong/Nylon Base with Leather Upholstery 110 Single Seater Lounge / Sofa in Fabric1. Varnished wooden base, skilfully crafted with finest hardwood for strength & durability. 2. Quality upholstery & fine stitching workmanship. 3. High Density Polyurethane Foam Come With Pocket Spring,toensurealonglasting Shapeofthesofa,providesoftand cushiony seating feeling and provide resilience for greater support and bestseatingcomfortevenforlong seating hours. 111 Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring /rubberised coir/32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet(fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge. 112 Single Seater Sofa Fabric finish 113 b) Two Seater Sofa Fabric finish 114 C) Three Seater Sofa Fabric finish 115 Sub Estimate No. 9 - Miscellaneous Works 116 Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 3 coats of French polish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect. 117 Veneer Finish. 118 1.5 mm thk Laminate Finish 119 Providing and fixing in position 19mm thk. Marineplywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, groove. Item to be completed in all respects as per drawings & direction by Architect. 120 Laminate Finish 121 Veneer finish 122 Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect. 123 Providingandfixinginposition 12mmthksoftboardpanellingwith approvedadhesive,partitionsurface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect. 124 ProvidingandsupplyingArmstrong ‘Optra Acoustical Wall Panelling’ with squareedgesmadeoffibreglass substrate25mmthickandwrapped on the front side with an acoustically transparentandfire-resistantfabric with an option of colours as per the choiceoftheArchitect/Person in-chargeofsize2100x600or 600x600mmprovidingaminimum sound absorption level of 0.90 NRC to beaffixedtowallusingWallpanel impalerssuppliedbyM/sArmstrong IndustriesIndiaPvt.Ltdand construction adhesives as per the instructionslaiddownbythe manufacturer. 125 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of38mmroundAluminiumchannel withBlackoutfabric&teltingwith chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) 126 The fabric shall be Pre-stressed compositematerialofHighTenacity Polyester Yarn with PVC Coating, Aluminium Backing, & Fungistatic Treatment. Fabric shall be of Soltis~B99-alu, Micro-Aerated - coated fabric to provide subtle view and should block thelightflux&offereliminationof glare and sunlight / heat radiance. Composit. Weight: 540 g/m2 (+/-5%) Thickness: 0.47 mm (+/-5%)FabricOpenessFactor:3%Visible Light Transmission: 0%(N-N) Solar Transmission : 0% Solar Reflectance : 25% - 69%Solar Absorption : 28% - 31% Tensile Strength (Warp/Weft): 160/170 daN / 5cmTearingStrength(Warp/Weft): 11/13 daN Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:M1/NFP92507, B1-s2,d0/EN 13501-1, CLASS A/ASTME84.ManagementQuality/ Environment – ISO 9001/ ISO 14001 Greenguard Certificate–UL2818 Gold Certification Program for ChemicalEmissionsforBuilding Materials,Finishes&Furnishings Roller Tube shall be of extruded Aluminium alloy 38mm O.D (or as per system dimension) with a minimum wallthicknessof1.0mmduly anodised for long life. Clutch shall be wrap spring design with high strength fibreglassreinforcedpolyster assembly and high carbon steel springs to transmit motion from drivingtodrivenmembersofclutch mechanism.Clutchshalloperateby directionally with the use of an endless beaded chain. Clutch mechanism shall be crash proof, prevent slippage and shall raise and lowersmoothlytoanydesired height.Clutch shall never need adjustment.Idlershallbeofhigh strength fibreglass reinforced polyster,consistingofanoutside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube androtatefreelyoncentreshaft, providing smooth, quiet and long wearing operation. Brackets shall be of tomised steel powdercoated to give superiorfinish.Bracketshall accommodateoverhead,sideorface mountingwithclutchassemblyon either end of the roller. Bottom of the blind shall be provided with aluminiumtubepowdercoatedina colourmatchingtothefabric.The fabric shall be enclosed in the suitably created pocket along with the tube.Thetubeshallbeclosedfrom sideswithendcapstogiveaneat look. 127 Providing, fixing, applying by CompanyTrainedTechnicians, premium Wall Covering (WallFabric), asperdetailsinattached specifications, or as per detailed specificationsandcoloursattached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on topofexistingP.O.Psurface),all complete, in a neat and workman like manner,asperdirectionsof Engineer-In-Charge. 128 Providing & fixing Artificate like ArtificalPlant,PictureFrameetc.as pershownindrawing& manufacturers specification. Picture Frame / Plant 129 Providingandfixinginposition mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of sizes given below. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of anyotheritemasmentionedinthe BillofQuantitiesandnotmeasured underanyotheritemetc.complete asperdetaildrawing,asspecified and as directed by Architect / Engineer 130 SIZE 15 X 15 MM 131 SIZE 50 X 50 MM 132 SIZE 90 X 12 MM 133 SIZE 25 X 38 MM 134 PolishingwithPUcoatingabovethe veneerwithrequiredcoatsincluding knotting,preparingthesurfaceetc complete as per direction of Engineer - in - charge. 135 Supply&Installationof3MCrystal Glass film Frosted/DUSTED/ effect with approved artwork, cut using digitalplotter.Self-adhesive, bubble-free installation to be done on clean glass , by Authorized Installers only.3M Architectural Markets. 3M interiorWarrantyforaperiodof5 years for interior application. 136 Providing and fixing modular aluminiumanodizedskirtings-1.5 mmthickness(minimum)of approvedprofilesuitablefor partitions,panellingandwalls.The profilesshallbemadefromfinest quality aluminium extrusions and anodizedminimum40micronsfor highdurabilityandcorrosion resistance including all necessary fittingsandaccessoriesfor installationasperthedirectionsof the EIC/Architect. Height 100 MM 137 6mmthkcolouredtoughened lacquered glass (back painted) 138 ProvidingSupplyingandfixining WPC (Wood Plastic Composite) fluted panels are Various colour, Shape and Sizeas per the directions of the EIC/Architect. 139 Providing,aupplying,fabricating and fixingpanel of aluminium composite panel cladding in approved shape madeout of 4mmthickACPsheet material consistingof 3mmthickFR grademineralcorefollowingNBCpart VFireandlifesafety(having2hours fireresistanceinaccordancetoASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminiumsheets(each0.5mmthick of AA 5005/AA3105 grade) The aluminiumcompositepanel cladding sheetshallbecoil coatedwithkynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratioofPVDFandacrylic)coatingof approvedcolourandsg=hadeontop faceandpolymer(service)coatingof bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats, weather silicon sealent,backer rods etc .overall weight of theACPshall not be less than 7.5 Kilogram/Sq.m) 140 Providing & Fixing of 6mm thk Corean Table Top with polishin of Approved make and colour as directed by Engineer in Charge. (Rates excluding GST) 141 Sub Estimate No. 10 - Electrical Works 142 LT Cables (Aluminum) (CB-LT/AL) 143 Supplying, erecting & terminatingFRXLPE insulated, galvanised steelformedwirearmoured (strip) cable,1100 V 3½ core 70 sq. mm. aluminium conductor complete erectedwithglands& lugsonwall/ trusses/pole or laid in provided trench/pipeasperspecification no. CB-LT/AL 144 Supplying, erecting & terminatingFRXLPE insulated, galvanised steelformedwirearmoured (strip) cable,1100 V 3½ core 25 sq. mm. aluminium conductor complete erectedwithglands& lugsonwall/ trusses/pole or laid in provided trench/pipeasperspecification no. CB-LT/AL 145 Bunch of Wires (WG-MA/BW) 146 Supplying & erecting mains with4x16 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/insidepole/busbars or any other places as per specification no.WG-MA/BW 147 LT Cables (Copper) (CB-LT/CU) 148 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel formedwirearmoured(strip)cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole orlaidinprovidedtrench/pipeas per specification no. CB-LT/CU 149 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in providedtrench/pipeasper specification no. CB-LT/CU 150 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in providedtrench/pipeasper specification no. CB-LT/CU 151 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V,3core2.5sq.mm.copper conductor complete erected with glands & lugs, on wall/ trusses/ pole orlaidinprovidedtrench/pipeasper specification no. CB-LT/CU 152 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V, 2 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/pipeasper specification no. CB-LT/CU 153 PANELANDDISTRIBUTIONBOARDs MAINLOWTENSIONPANELGeneral Specification for Power Panels i)The Electricalpanelsshouldbeprocured from Central Power Research Institute(CPRI)approvedPanel manufacturer.ii)Electricalpanels shallbesubjectedtoMeggertests and HV tests at site in the presence of Client/ Consultant as per the requirementofClient/Consultant. iii)TheContractorshouldsubmit3 sets of as built drawings of the Electrical panels. iv)The Electrical panelsfeedersshouldbeproperly labelled using engraved black anodized labels. Also, night glow radiumlabelsshallbeprovidedfor eachfeederspecifyingthenameof the load. v)The detailed specifications missing in the BOQ should be followedfromtheSpecificationsand Electrical Single line diagram in ACAD format.vi)Contractorshouldsubmit thefabricationdrawing,singleline diagram and control logic system to Consultant for approval before fabrication of all panels. vii)The Electricalpanelsmainbody,doors, partitions should be fabricated out of 2mm thick MS steel sheet. vii)Appropriatesizeknockoutholes should be provided in the panels as perthesizeoftheincomingand outgoingcables.Designasper technical specifications and obtain approval of drawings, prior to manufacturing, manufacture, insure, pack with PVC sheets, transport to site, store, erect in proper position, testing and commissioning of Indoor DutyandhavingIP52RatingLT panel cubicle and extendible type front and back operated having Top/Bottom Bus-Bars and Top/bottom Cable/BusDuctentry,&fabricated using14gauge,CRCAsheetsteel for main frame, door and partitions, dust and vermin proof lockable doors and carrying the controlwiringusingapprovedmake FRLS colour coded Wires of minimum 2.5 sq.mm and using approved make pushonterminals.Thepanelshall be floor mounting type, all complete with interconnections by using electrolyticgradetinnedcopperBus Bars of 99.95% purity for Main, submain LT Panels and Cu/ Al busbars forotherpanels,colourcodedheat shrinkablePVCsleeves.ThePanel shall be painted with Powder Coated granularfinishedpaintingwith7 tank painting process with shade No. RAL 7032 from inside and outside all completeasperdrawings,technical specificationsandfinalapprovalof Consultant. 154 Providing & erecting floor/wall mounting,PanelBoard,withdoor, suitableforfourpoleincoming4P MCCB and outgoings up to 63A MCCBs/MCBs on iron frame, as below (Includingallrequiredcomponents, busbar, wiring, metering, cable alley etc.) Incomer : 100A, 4P MCCB 18kA Thermal Magnetic Trip Unit Busbar : 100A,TPNCopperIndicator:LED typeRYBphaseindicatorsMulti FunctionMetertoreadVAHzKW KWh PF and with suitable set of CTs, 2AconnectorwithFuseOutgoings: 40A, 4P MCB 10kA x 2Nos. 32A, 4P MCB10kAx5Nos.32A,2PMCB10kA x 3Nos. Capacitor Bank of total25 KVAR capacity in steps as (5*4 + 3+2KVAr)toworkinautomode (APFC),completewithallnecessary accessories to maintain power factor near unity. 155 LT - MCBDBs (SW-MCBDB) 156 Supplying&erectingtriplepoleand neutraldistributionboard(TPNDB), SPMCBof4ways/phase(12poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. 157 Supplying&erectingtriplepoleand neutraldistributionboard(TPNDB), SPMCBof8ways/phase(24poles), withdoor,1.2mmthickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. 158 Supplyinganderectingsinglepole and neutral distribution board (SPNDB),with2waysforincoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB 159 LT - MCBs/ MCB Change Over Switch (SW-MCB) 160 Supplying, erecting & marking FP MCB6Ato32A,withratedshort- circuit breaking capacity (Icn) 10kA in provideddistributionboardasper specification no. SW-MCB 161 Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuitbreakingcapacity(Icn)10kA in provided distribution board as per specification no. SW-MCB 162 Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kAinprovideddistributionboard as per specification no. SW-MCB 163 Supplying,erecting&markingDP MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kAinprovideddistributionboard as per specification no. SW-MCB 164 RCCB / RCBO (SW-RCCB/RCBO) 165 Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. 166 Supplying, erecting & commissioning 2poleRCCB40A,electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. 167 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thicknesssuitableforDPMCB/TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 168 Supplying,fixingandcommissioning 4 pole RCBO 32/40A, with overcurrent,ratedshort-circuit breaking capacity (10 kA) and earth leakageprotection,with30/100/300 mAsensitivityandshortcircuitand earthleakagetripindicationasper specification no SW-RCCB/RCBO 169 Supplying&erectingfourpoleON LOAD change over switch, 415V, 100A, open execution having staggered termination, phase barrier, shroudterminationandterminal coveralongwithauxiliarycontacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3Part-1/3.(ProvisionforDG Change over) 170 Point wiring for light/bell in min. 20 mmFRLSgradeHMSConduitwith1.5 sq.mm (2+1E) FRLSH grade copperwires,modulartypeswitch, earthing and required accessories as per specification No: WG-PW/SW. (Avg. length 6 mtr. from Switch Board) 171 Point wiring for light/bell in min. 20 mm FRLS grade HMS PVCconduit with1.5 sq.mm (2+1E) FRLSH grade copperwires,modulartypeswitch, earthing and required accessories as per specification No: WG-PW/SW.(Avg. length 8 to 10 mtr. from Switch Board) 172 Point Wiring (WG-PW) 173 Secondary point wiring for additional light/bellpointinmin20mmPVC conduit with 1.5 sq.mm (2+1E) FRLSHgradecopperwirewith requiredaccessoriesasper specification no.WG-PW/SW 174 Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copperwires,modulartypeswitch, earthing and required accessories as per specification no.WG-PW/CW 175 Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copperwire,modulartypeswitch, earthing and required accessories as per specification no.WG-PW/SW 176 Pointwiringforindependentplugin minimum20mmHMSPVCconduit with1.5sq.mm(2+1E)FRLSH grade copper wire, modular type switch, earthing and required accessoriesasperspecificationno. WG-PW/SW 177 Concealing ofConduits (WG-MA/CC) 178 Supplying&erectingHMSPVC conduit20mmdia.withnecessary accessories in wall/floor with chiselling appropriately as per specification no.WG-MA/CC. 179 Supplying & laying HMS PVC conduit 20mm dia. with necessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 180 Supplying & erecting HMS PVC conduit25mmdia.withnecessary accessories in wall/floor with chiselling appropriately as per specification no.WG-MA/CC. 181 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. 182 Supplying&erectingHMSPVC conduit32mmdia.withnecessary accessories in wall/floor with chiselling appropriately as per specification no.WG-MA/CC. 183 Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 184 Supplying & erecting rigid steel conduit16SWG20mmdia.with necessary accessories in wall/floor withchisellingappropriatelyasper specification no. WG-MA/CC. 185 Supplying & laying rigid steel conduit16SWG20mmdia.withnecessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 186 Supplying & erecting rigid steel conduit16SWG25mmdia.with necessary accessories in wall/floor withchisellingappropriatelyasper specification no.WG-MA/CC. 187 Supplying & laying rigid steel conduit 16SWG25mmdia.withnecessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 188 Supplyinganderectingmainswith 2x1.5 sq.mm FRLSH copper PVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 189 Supplyinganderectingmainswith 2x2.5 sq.mm FRLSH copper PVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 190 Supplyinganderectingmainswith 1x2.5 sq.mm FRLSH copper PVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 191 Supplyinganderectingmainswith 2x4sq.mmFRLSHcopperPVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 192 Supplyinganderectingmainswith 3x2.5sq.mmFRLSHcopper PVCinsulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 193 Supplyinganderectingmainswith 3x4sq.mmFRLSHcopperPVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 194 Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no.x0.25mmdia.)3coreflexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 195 ELV Cabling (WG-ELVC) 196 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6cablesuitablefornetworking compliantwithANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC 197 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6Acablesuitablefornetworking compliantwithANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC 198 Telephone,AudioandVideoWiring (WG-TW/TW) 199 Supplying & erecting 20 pair, 0.5 mm dia.jellyfilledarmouredtelephone coppercablewithpoly-allaminate moisture barrier, polythene sheathed,G.S.Tapearmouredpolythene jacketed having laid in provided trenchasperspecificationno.WG-TW 200 Telephone Accessories (WG-TW/TA) 201 Supplying, erecting & commissioning20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA 202 Supply & laying RG 6 wire in prelaid surface/ recessed PVC conduits 203 Supply & laying RG 11 wire in prelaid surface/ recessed PVC conduits 204 Modular switches and Accessories 205 Supplyinganderectingmodular type USB Charger socket of 1 module with nominal output voltage of 5V DC±5%andnominaloutputcurrentof 5V, 2-3A, on provided plate and box with wiring connections complete. 206 Supplying and erecting modular pop up Box 8 module with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table . 207 Supplyinganderectingmodular type switch 6A/10A on provided plate and box with wiring connections complete. 208 Supplyinganderectingmodular typeswitch16Aonprovidedplate and box with wiring connections complete. 209 Supplying and erecting modular type3pin6Amultisocketwithsafety shutteronprovidedplateandbox with wiring connections complete. 210 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutteronprovidedplateandbox with wiring connections complete. 211 Supplying and erecting modular type (two module) electronic step regulatorforfan,onprovidedplate and box with wiring connections complete. 212 Supplying and erecting modular typeT.V. socket single outlet on provided plate and box with wiring connections complete. 213 Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and boxwithwiringconnections complete. 214 Supplying and erecting modular type computer Jack RJ 45 with safety shutter,onprovidedplateandbox with wiring connections complete. 215 Supplying and erecting modular type bellindicatoronprovidedplateand boxwithwiringconnections complete. 216 Supplying and erecting modular type buzzer220/250Vonprovidedplate and box with wiring connections complete. 217 Supplying and erecting modular type blankingplateonemodule,on provided plate & box. 218 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor1 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 219 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor2 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 220 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 221 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 222 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 223 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 224 Networking Components (WG- NWC) 225 Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE802.3 standards with min. 193W PoE capacity with 4GE SFP uplink in provided rack as per specification no.WG-NWC/ENS 226 Networking Accessories (WG-NAS) 227 Supplying and fixing Cat 6A 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 &ISO/IEC11810completeasper specification no. WG-NAS/PP 228 Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x550x613mm)asper specification no. WG-NAS/RAK 229 Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in providedconduitswithmale/female 19pin HDMI connectors complete. 230 Indoor LED Fittings (FG-IDF/LED) 231 Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuserhavingsystemlumens outputofMin.1200Lumens,min. efficacyof110lumen/W,CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95,operatingrangeof 120-270V, surge protection of 2.5 kV, Lifeclassof50,000HrsatL70B50 including driver, having mounting arrangementwithboardforsurface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 232 Supplying and erecting LED square / circularMax.18Wdownlighter/ PanelLighthavingpressuredie-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K,BeamAngleof120deg., max.rippleof5%,THD<10%,p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of50,000HrsatL70B0including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum2yearswarrantyasperspecification No. FG-IDF/LED. 233 SupplyinganderectingLEDPanel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrenediffuserhavingsystem lumens output of Min 4200 Lumens, min.efficacyof120lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50includingdriver,having mounting arrangement with board for surfacetypeorspringloaded mounting clips complete with minimum2yearswarrantyasperspecification No. FG-IDF/LED. 234 Supplying and erecting decorative pre-wiredboxtypefitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light). 235 Supplyinganderectinganodized aluminium mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K,BeamAngleof110deg., Ripple<5%,THD<20%,p.f.>0.95,operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specificationNo. FG-IDF/LED. 236 Supplying and erecting CRCA powder coated light LED fitting (4 feet) Max. 33Wwithhightransitivitydiffuser withsystemlumensoutputofMin. 4000lumens,min.efficacyof120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 , IP20 rated including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. 237 Supplying and erecting LED Strip lightMax.45WIP20classhaving minimum lumens output of 800 Lumens/m,min.efficacyof90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%,p.f.>0.95,operatingrangeof 230-270V, Life class of 30,000 Hrs at L70B50includingdriverwith minimum1yearwarrantyasperspecification No. FG-IDF/LED. 238 DMXController5-in-1LEDlighting Control System, Easy to operate, CompatiblewithavarietyofLED drivingIC.Reliablecommunication, support WiFi wireless network transmission and real-time simultaneousdisplay.Alsocanuse internet’sremotecontroltoachieve real-timesimultaneousdisplay. Achieving synchronization/offline seamlessly switch, no need any splitter. 239 DMXloopcontrolcablesuitablefor above controller & dimmable lighting system in suitable size PVC conduit, including all accessories, support etc. 240 Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K,BeamAngleof120deg., max.rippleof5%,THD0.95, operatingrangeof120-270V,surge protectionof2.5kV,Lifeclassof 50,000 Hrs. at L70B50, including driver suitable for Dimming Purpose, havingmountingarrangementwith board for surface type or spring loaded mounting clips complete with 3 years warranty. 241 SupplyinganderectingLEDPanel Light (1200mm X 300mm) Max. 33 W having CRCA powder coated housing, polystyrenediffuserhavingsystem lumens output of Min 4200 Lumens, min.efficacyof120lumen/W, CRI>80, CCT upto 6500K, BeamAngle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50includingdriversuitablefor DimmingPurpose,havingmounting arrangementwithboardforsurface type or spring loaded mounting clips complete with minimum 2 years warranty, similar to specification No. FG-IDF/LED but suitable for Dimming application. 242 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C.50cycles1200mm,Max.Energy Consumptionof28Whavingservice ratio(CMM/W)ofMin.8,PF>0.9, THD<10%withIRremotecontrol, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as perspecification no. FG-FN/CF. 243 OnlineUninterruptiblePowerSupply (UPS)(AP-UPS) 244 Supplying, erecting, testing & commissioning of 10 kVA capacity on line pure sine wave,PWM,IGBT based UPSwith0.9tounityoutputpf,3 phase input & 3 phase output completewithallprotectionsasper specification no. AP-UPS(Without batteries) 245 Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPSwith0.8tounityoutput pf,singlephaseinput&1phase outputcompletewithallprotections as per specification no. AP-UPS (Without batteries) 246 Batteries for Inverter & UPS 247 Supplyinganderecting12V/100Ah SMFbatterywithbatteryterminal wire, duly charged complete with 24 months warranty complete. 248 Cable Tray (CB-CT) 249 Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mmheightcompletewithnecessary hardware. 250 Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of200mmwidth&20mmheight complete with necessary hardware. 251 Supply&Installationofunderfloor Raceways,rectangularprofile& Junctionbox.Thecostshallinclude Chiselling/floorCuttingasrequired tofixtheu/fRacewayswith supporting and fixing accessories including Joint sleeves, fasteners etc. (Refilling and Making good, finish floor will be in Civil scope) 252 GI Trunking, 75mm (wide) x 38 mm (height), single compartment 253 GI Trunking, 100mm (wide) x 38 mm (height), single compartment 254 GI Junction Box with cover, Adjustable 150mm X 150mm x 65-90mm 255 GI Junction Box with cover, Adjustable 225mm x 225mm x 65-90mm 256 Supplying and erecting PVC box trunkingofsize50x50mm.with accessories on wall/ceiling as per specification No: WG-MA/BOX. 257 Supplying and erecting PVC box trunkingofsize100x50mm.with accessories on wall/ceiling as per specification No: WG-MA/BOX . 258 Intelligent Addressable Fire Alarm System (FF-AFAS) 259 Supplying, installing, testing and commissioning of micro processor based intelligent addressable main firealarmpanel,centralprocessing unitwiththe1loopcapacityand capableofsupportingnotlessthan250devicesanddetectorsperloop, with on-board LCD alphanumeric backlitdisplaysuitableforminimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal conditionand30minutesinalarm condition, The panel shall have suitable provision for network connectivity&compatibleforthird party integration(Open Protocol to communicate)viaa MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with3yearsreplacementwarrantyand inclusiveoflifetimesoftwarelicense validity, as per specification no FF-AFAS/CP. 260 Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall havesingle/twinbi-colourLEDfor 360degviewing.Thedetectoris conformingtoIS2189:2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipmentreplacementwarranty,Designed to meet UL268, 7th Edition. FF-AFAS/SD. 261 Supplying, installing, testing and commissioningofintelligent addressable thermal/heat detector with fixed temperature thermistor with 0°C to 88°C temperature range, complete with base as required, single/twinLED’swith360degree view,in-builtlockingmechanismto checktheremovalandpilferageof thedetector,.DetectorShall conformingtoIS:2175-1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & FM approved with 3 years equipment replacement warranty,DesignedtomeetUL268, 7th Edition, , as per specification no FF-AFAS/HD - ROR. 262 Supplying, installing, testing and commissioning of Addressable Multisensor/MulticriteriaPhoto Thermal(Smoke+Heat)Detector. The detector shall have twin bi-colour LED for 360 deg viewing. The intelligent multi criteria detection deviceshallincludetheabilityto combinethesignalofthethermal sensorwiththesignalofthe photoelectricsignalinaneffortto reacthastilyintheeventofafire situation.Itshallalsoincludethe inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristicsofthethermaland smoke sensing chambers and comparingthemtoadatabaseof actual fire and deceptive phenomena. Thisitemisreferredfor Non-conditioning Area conforming to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty,DesignedtomeetUL268, 7th Edition. 263 Supplying, installing, testing and commissioning of addressable fire control/relay module for AHU, Access Control,Lifts,Staircase Pressurization, Fire Suppression & otherThirdPartyOutputsetc., Module shall conforming to IS 5051 Part2(Sec1to3):1982reed relays / EN 54/VdS / UL & FM approved with3yearsequipment replacement warranty, as per specification no FF-AFAS/CRM-FCM 264 Supplying, installing, testing and commissioning of addressable fire monitormoduleforflowswitches, Panic Bars & other Third Party Inputs. Themonitormoduleshallmonitor potentialfreecontacts.Thedevice shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982Reedrelays,EN54/VdS/UL&FM approved with3yearsequipmentreplacement warranty, as per specification no FF-AFAS/MM 265 Supplying, installing, testing and commissioning of addressable fire isolatormoduleforisolatingshort/ dewired / loose circuits with automaticresettingarrangement. IsolatorBasecanalsobeproposed, howeverinthatcaseneedstobe considered with each detector & module. The device shall have an LED whichshallblinkinnormalstate& getsteadyonactivationtomonitor the health status of the device. module complete as required. ModuleshallconformingtoIS5051 Part2(Sec1to3):1982,,EN 54/VdS/UL&FMapprovedwith3 years equipment replacement warranty, FF-AFAS/ISM 266 Supplying, installing, testing and commissioning of addressable manual callpoints(breakglasstype/pull stationtype),madeofaddressable breakglassplasticsquareinshape surface/flushmounted withBreak Glassmassageembeddedonthe glass,completeerectedwith mountingbaseandrequired accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP. 267 Supplying, installing, testing and commissioning of Addressable SoundercumStroberatedat minimum75dB@3mforAudible annunciation and minimum 75cd flashing at 1 Hz for visual indication. Module shall conforming to IS 2189: 2008, IS 15908:2021 / EN 54/VdS /UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/ S-ST 268 ConventionalFireAlarmSystem (FF-FAS) 269 Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28VdcsupplyhavingFRPolymer ABSHousingcompleteasper specification no. FF-FAAS/RRI 270 Supplying, installing, testing and commissioningFR,XLPEarmoured cable2core1.5sq.mm.copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU 271 Public Address Systems (PA) 272 Supplying, erecting, testing & commissioning Mixer Amplifier 250W RMS Power with Built-in Digital Player, MP3 Player with USB/ SD/ MMC Card Reader,Bluetoothwithremoteand having min 6 Mic & 2 Aux Inputs with Box Speaker/DriverUnitselectorswitch. Frequencyresponse50-15,000Hz ±3dB. The unit shall have Preamplifier and Line Output for connecting to a Booster Amplifierandforrecordingthe programme with Resettable circuit breaker for protection against overload and short circuit.Theunitshallhavespeaker output range of 4?, 8?/(Low Impedence) and 70V&100V/(HighImpedence)&It can instanttransfertoDCpowerifAC power fails. Signal to noise ratio between60dB to 65dB complete as per specification no. PA-MA 273 Supplying, installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response andadjustabletweetercompleteas per specification no. PA-FMCS 274 Supplying,erecting,testingand commissioning of multistrand annealed bare copperconductor,transparentPVC insulated2Cx1.5sqmmspeaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR 275 Supplying, Installing, testing and commissioningofSupercardioid professional WiredDynamicmicrophonewith noiselessmagneticreadswitch, frequency Response : 50-18,000Hz, Sensitivity : 2.5mV/Pa,Impedance:300?,with quick detachableholderwith3-pin professionalXLRconnector&10m twin core shielded low noise cable onprovided stand complete as per specification no. PA-WDM 276 Supplying & erecting Microphone table/floor stand with height 350-530 mm, base dia. min 150 mm, min. weight 1.8 kg with superior quality of chrome plating/powdercoating(resistantto rust & corrosion) having sturdy mechanism forensuringtroublefreemovement and positioning ofmicrophone complete as per specification no. PA-MTS 277 Supplying,erecting,Volumecontrol withfaceplatandconcealedmetal box for PA speaker. 278 CCTVSystems(CCTV)Cameras (CCTV-CAM) 279 Supplying&erectingofHigh definition2MegapixelIPIRBullet Camera with following features : Image Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions,WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4mm,horizontalFOV86°,vertical FOV 47°, diagonal FOV 102°6mm,horizontalFOV55°,vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0Lux(IR)NightVisionDistance minimum IR - 30m. Camera minimum Adjustment Angles -Pan:350°,Tilt:72°,Rotate: 350°.PowerSupply:Support12VDC& PoE, IP67, IK10 - Vandal Resistant.BuiltinmicroSD/SDHC/SDXCcard slot of minimum 128 GB,Built in microphone. minimum Input/Output - Audio in × 1,AudioOut×1,Alarmin×1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. ImageEnhancements : Day/Night-Auto(ICR)/Color/Black& White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation,Highlight Compensation. Events : Privacy Masking, Motion detection,Scenechangedetection, Facecapture,Videotampering,audio exception detection, Region entrance detection, Region exiting detection. Operatingtemperature(-30to60° C ) .Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log,TLS1.2,AES-256,SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS,TCP/IP,SecureReal-Time Transport Protocol (SRTP), Bonjour, SNMPandSecureshell(SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting heightnotmorethan5meter)etc withallaccessoriesetccompleteas per specification no.CCTV-CAM. 280 Supplying&erectingofHigh definition 2 Megapixel IP IR varifocal Bullet Camera with following features, Image Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutionsWDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, LensType:2.8-13mmLens, auto/motorized varifocal focal, Field of View :horizontal FOV 103° to 32°, vertical FOV 73° to 24°, diagonal FOV 142° to 40° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0Lux(IR)NightVisionDistance Min IR- 50m, Camera minimum Adj ustment Angles -Pan:350°,Tilt:72°,Rotate: 350°. PowerSupply:Support12VDC& PoE,IP67, IK10 – Vandal Resistant. BuiltinmicroSD/SDHC/SDXCcard slot of min 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in× 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance.ImageEnhancements:Day/Night- Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic WhiteBalance,AutomaticGain Control, BacklightCompensation,Highlight Compensation.Events : Privacy Masking, Motion detection,Scenechangedetection,Face capture,Videotampering,audio exception detection, Region entrance detection, Region exiting detection. Operatingtemperature(-30to60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS,TCP/IP,SecureReal-Time Transport Protocol (SRTP), Bonjour, SNMPandSecureshell(SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACHcompliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting heightnotmorethan5meter)etc withallaccessoriesetccompleteas per specification no. CCTV-CAM. 281 Supplying, installing, testing & commissioningof8/10Ch.Network Video Recorder(NVR),suitablefor2MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to 1920x1080. Support H.265 or higher, H.264, MJPEG,Incoming Bandwidth 80Mbps with minimum 2 SATA Hard Disks,ANR Technology, 2SATAinterfacesfor2HDDsand capacity of each HDD up to 8TB, minimum02USBport,AlarmI/O 4/1, RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, supportmultibrandnetwork Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programmingetccompleteasper specifications no. CCTV-NVR 282 Supplying&erecting4TBinternal SurveillanceHDDsuitableforSATA Port of NVR, interface transfer rate 6 GB/S,Maximumsustainedtransfer rate 150MB/Secto180MB/S.Drivebay supported08+,Camerassupported up to 64, Cache (MB) 64, Load/Unload Cycle-3000000,WorkLoadRating per Year 180TB,MTBF1000000Hrs.HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD 283 Supplying & erecting 32 professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 HzACsupplyand24/7DutyCycle dulyerectedonwallortabletopwith standard accessories like wall mount stand and wiringconnectionsetc.completeas per specifications no. CCTV-MON 284 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6 armoured cable suitable for networking compliant with ANSI/TIA-568.2-Dstandardsasper specification no. WG-ELVC/NC 285 Supplying and erecting 6 fibers LSZH armoured multimode optical fiber cable with, core dia 50/125 µm (OM3),suitableupto10GBPS, complianttoIEC60793/IEC60794 standards,onwall/ceilingorlaidin providedpipe/trenchasper specification no. WG-ELVC/OFC 286 Supplying, fixing, and configuring 8-ports managed gigabit, layer-2 switch, 10/100/1000 base-T, PoE smartswitchplus2SFPerectedin providedrackcompliantwithIEEE 802.3 standards complete. 287 Supplying, Installing, Testing & CommissioningofRodentRepellent system consisting of the following: 288 TransducersAbove/BelowFalse Ceiling (approx coverage area 150sq.ft) 289 TransducersBelowFalseCeiling (approx coverage area 300sq.ft) 290 DigitalTypeMicroprosserbased MasterControllerwithGraphicLCD display for controlling the parameters suchaswavespeed,wavedensity, frequency,Transducertesting.The controller should support upto 20 transducers in dedicated connection & 24transducersinsingleloop @300/150sq.fteach.Thecontroller shall be networkable on RS 485 havingfacilitytosupportHardwired Third Party BMS integration via Modbus. The system shall use UL and CE approved transformers for power supply. 291 Testing,Commissioning& Verification Kit comprising of UltrasoundWave Analyzer (Software and Hardware) that can do the following: a. Capture,Record and Report (in pdf format) One Third Octave Ultrasound BandFrequenciesemittedfromthe transducers thereby ensuring HUMAN SAFETYasperIRPA(International Radiation Protection Association, Geneva) Guidelines. b. Capture,Record and Report (in pdf format) ultrasound output from each transducerdepictingindividual frequencypeaksalongwith corresponding sound pressure levels, current operating band and the Controller Name for verifying the product. 292 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6cablesuitablefornetworking compliantwithANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC 293 Supplying, Installation & commissioning of Sony make 85” 4K LEDTVhavingmodelno. FW-85BZ40H with bracket and proper installation etc. complete, as per directionofengineer-in-charge. (Rates Excluding GST) 294 Supplying, Installation & commissioning of Sony make 65” 4K LEDTVhavingmodelno. FW-65BZ30J with bracket and proper installation etc. complete, as per directionofengineer-in-charge. (Rates Excluding GST) 295 Supplying, Installation & commissioning of Sony make 43” 4K LEDTVhavingmodelno. FW-43BZ30J with bracket and proper installation etc. complete, as per directionofengineer-in-charge. (Rates Excluding GST) 296 Supplyinganderectingmodularpop up Box 8 module with provided AV/HDMI , RJ 45,6 A electrical sockets and switch on provided table 297 Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in providedconduitswithmale/female 19pin HDMI connectors complete 298 Sub Estimate No. 11 - Fire fittings System 299 Pipes (FF-PP) 300 Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 301 Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 302 Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 303 Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 304 Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 305 Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 306 Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessaryfittingsdulypaintedwith twocoatsofsyntheticenamelpaint offireredcolouroveracoatof primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP 307 Supplying and erecting G.I. pipe ‘C’ classERW100mmdiawith necessaryfittingsdulypaintedwith twocoatsofsyntheticenamelpaint offireredcolouroveracoatof primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP 308 Supplying and erecting 100 mm dia. castirondoubleflangesluicevalve complete with PN16 pressure rating, as per specification no. FF-VL/SV 309 Valves (FF-VL) 310 Supplyinganderecting50mmdia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV 311 Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV 312 Supplyinganderecting75/80mm dia cast iron double flange ball type NRVcompletewithPN16pressure rating, as per specification no. FF-VL/NRV 313 Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, asper specification no. FF-VL/NRV 314 Supplyinganderecting75/80mm diaCastIronendlinestrainerof Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standardOAR(openareaRatio)for positive suction complete as per specification no. FF-VL/ELS 315 Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flangedendpattern,PN16pressure rating,SSscreen,endconnection withFlanged/Screwed/Socket Weld / Butt Weld End etc with standardOAR(openareaRatio)for positive suction complete as per specification no. FF-VL/ELS 316 Supplyinganderecting25mmdia gun metal gate valve complete with PN16pressurerating,asper specification no. FF-VL/GV 317 Supplyinganderecting50mmdia gun metal gate valve complete with PN16pressurerating,asper specification no. FF-VL/GV 318 Sprinklers (FF-SPR) 319 Supplying,erecting,testingand commissioningofUpright/Pendent quartzoid bulb sprinkler, 15 mm (½) dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR./UP 320 Supplying,erecting,testingand commissioningofhorizontalsidewall quartzoid bulb sprinkler,15 mm (½) dia quartzoid bulb. NBCM Body chromefinished,68ºCfixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS 321 Supplying,erecting,testingand commissioning of concealed quartzoid bulb sprinkler, 15 mm (½) dia quartzoidbulb.NBCMBodychrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/CON 322 Supplyingerecting,testingand commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximumworkingpressureof175 PSI test pressure of 875 PSI (Burst) withbranchline(Inlet)25mmNPT malethreadtosprinklerhead (Outlet)15mmNPTfemalethread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000 mm size (UL Listed) complete as requiredas per specification no. FF-SPR/FHP 323 Supplyingerecting,testingand commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximumworkingpressureof175 PSI test pressure of 875 PSI (Burst) withbranchline(Inlet)25mmNPT malethreadtosprinklerhead (Outlet)15mmNPTfemalethread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1200 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP 324 Supplyingerecting,testingand commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximumworkingpressureof175 PSI test pressure of 875 PSI (Burst) withbranchline(Inlet)25mmNPT malethreadtosprinklerhead (Outlet)15mmNPTfemalethread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1500 mm size(ULListed)completeas required as per specification no. FF-SPR/FHP 325 Fire Fighting Accessories (FF-FFA) Priming Tank 326 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kgpercmsquarefittedwith12/15 mm dia. pad cock valve, erected with providedG.I.pipe,elbowetc. complete as per specification no. FF-FFA/PG 327 Supplying and fixing of self expanding,readytouse polyurethane(PU) foam sealant of minimum750mlbottle,suitableto sealtheopeningsofallkindsof cables, pipes and cable support system in steel, aluminium and plasticprofiles(excepthollowcore conductors).Sealantshallhave minimum2hourfirerating, conforming to EN 1366-4:2021 as per specification no FF-FRS. 328 Fire Extinguishers 329 Supplying & erecting Carbon Dioxide (CO2)fireextinguisherof4.5kg. capacity cartridge type conform to IS 2878/15683completeerectedwith necessaryclampmadefrom50x6 mm. M. S. flat with nut & bolts routed in wall complete. 330 Clean Agent Fire Suppression System (FF-FSS) 331 Supplyingerecting,testingand commissioning of Direct Low Pressure (DLP),automaticelectricalcabinet fire suppression system kit comprises of the mild steel cylinder, hydraulic tested to 30kg/cm2tocheckforleakages& burst pressure above 110kg/cm2. duly hot phosphate & epoxy powder coated internally and externally more than65micronsorpaintedwith1 coatofprimerand2coatsofred enamelpaintallcomplete.The Cylinder assembly is filled with 4 kg to 4.54 kgs of clean agent gas (FK-5-1-12 UL listed) and pre-pressurized to 15/16 Bar having storage & operating temperature rangeof(-)17.8deg.Cto54.4deg.C withallimportantaccessoriese.g. brassassemblyvalvewithpressure gauge, end of line plug with pressure gauge suitable to connect with provided Linear heat detection tube, completewithmountingbracket assembly,requiredsizerubber grommets,plasticloopclamps, pressureswitchandcaution& cylinder Labels etc. 332 ABC type fire extinguishers of 6 kg. capacity having IS certification mark shall be provided & spread over each floor 333 Removal of Existing (non suitable piping&sprinklersfornewInterior Plan)Sprinklersystem,completein allresepctsforproposedrenovation area. 334 Sub Estimate No. 12- HVAC Works (High Side & Low Side) 335 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.4TR (512 cfm) to 2.0TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete.The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (MD -2 & Meeting Room -2) 336 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassetteroom/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.0TR (441 cfm) to 1.3TR(512 to 530 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (Jt.MD Cabin-2, Waiting area-1) 337 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassetteroom/indoor unit (IDU-compact/standard size) ofnominal cooling capacity 1.0TR (441 cfm) to 1.3TR (512 cfm) having EER as per BEE standards andspecifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDUwith drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, andfresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, ACsupply complete. The unit consisting with any additional refrigerant and oilcharge as per requirement during installation. (Ante Room, Serverroom) 338 Supply, installation, testing andcommissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 0.6TR (420 cfm) to 0.8TR (441 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.(PA Cabin-1 & Typical Cabins-1) 339 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR (441cfm) to 1.3TR (512 cfm) having EER as per BEE standards and specifications, suitable as per siterequirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastalarea in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oilcharge as per requirement during installation. (Server area) 340 Supply, installation, testing and each commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installationcomplete. (Printer Area) 341 Supply,installation,testingand commissioning of VRF/VRV based ceiling suspended 2Waycassette room / indoor unit (IDU-compact/standardsize)of nominal cooling capacity 1.4TR (512 cfm) to 1.7TR (618 cfm) having EER as per BEE standards and specifications,suitableaspersite requirementwithswinglouversand adjustablebladesfromsides.IDU with drainage arrangements, fan, refrigerantliquidandrefrigerant piping,cordlessremotecontrol,and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil chargeasperrequirementduring installation. (Reception-1 & Staff Area-5) 342 Supply,installation,testingand commissioning of VRF/VRV based ceiling suspended 4Waycassette room/indoor unit (IDU-compact/standardsize)of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR (1100 cfm) having EER as per BEE standards and specifications,suitableaspersite requirementwithswinglouversand adjustablebladesfromsides.IDU with drainage arrangements, fan, refrigerantliquidandrefrigerant piping,cordlessremotecontrol,and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil chargeasperrequirementduring installation. (Lobby Area-Stilt Floor) 343 Supplying,erecting,testingand commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable greenequivalentrefrigerant,for minimum cooling capacity as delivering100%capacityat47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air dischargesuitableforlongerpiping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRVtechnologymicroprocessor basedcontrol compressor starter/controlpanelwithscroll compressor, air cooled copper condensercoilofsuitableshapefor increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver,coppertubealuminiumfin aircooledcondenser,condenserfan withmotorsuitablefor415V±10%, 50Hz,3phasepowersupply(all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housedinpowdercoatedweather proof cabinet complete. 344 Supplying,erecting,testingand commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU)complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable greenequivalentrefrigerant,for minimumcooling capacity as delivering100%capacityat47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air dischargesuitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technologymicroprocessor based control compressor starter / controlpanelwithscroll compressor, air cooled copper condensercoilofsuitableshapefor increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, coppertubealuminiumfin aircooledcondenser, condenserfan withmotorsuitablefor415V±10%, 50Hz,3phasepowersupply(all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housedinpowdercoatedweather proof cabinet complete. 345 Supplying and installation of high pressuregraderequiredsizecopper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways,Nitrilerubber insulation, painting etc. with brazing andtestingforleakagesconfirming the normal operation of the VRV/VRF air conditioning system. 346 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerantcopperpipeof28.6mm dia(OD)forliquidline/suctionline supplyandreturnpipingofsuitable gauge(hardcopperpipeforliquid mainlineandsoftcopperpipefor refrigerant) along with necessary supports,hangers,clamps,vibration isolators and fittings such as bends, tees,valves,gauges,strainerswith insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread,waterpermeanceandultra violet radiations with OEM standards ofVRV/VRFairconditioningsystem complete. 347 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerantcopperpipeof15.9mm dia(OD)forliquidline/suctionline supplyandreturnpipingofsuitable gauge(hardcopperpipeforliquid mainlineandsoftcopperpipefor refrigerant) along with necessary supports,hangers,clamps,vibration isolators and fittings such as bends, tees,valves,gauges,strainerswith insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 348 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerantcopperpipeof12.7mm dia(OD)forliquidline/suctionline supplyandreturnpipingofsuitable gauge(hardcopperpipeforliquid mainlineandsoftcopperpipefor refrigerant) along with necessary supports,hangers,clamps,vibration isolators and fittings such as bends, tees,valves,gauges,strainerswith insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 349 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply andreturnpipingofsuitablegauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) alongwithnecessarysupports, hangers,clamps,vibrationisolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 350 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line/suction line supply andreturnpipingofsuitablegauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) alongwithnecessarysupports, hangers,clamps,vibrationisolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 351 Supply, Installation, Testing & Commissioning of Rectangular shape SoundAttenuatorswithhighquality galavlanized sheet of min 22 G includinghighqualityperforated galvanizedsteelsheetsplitters/ baffles with Inorganic, fire resistant, vermin and moisture proof sound absorbent rock wool of 50kg/m³ density, with liner, duct connections to be made with required slip on PVC jointssizeofattenuator600mmx 450 mm x 150 mm 352 Supply & Installation of Factory Pre-cutSMARTPre-InsulatedINDUS PIR Panels complete CFC & HCFC Free 17mm thick with 80 micron Embossed Aluminium foil (Anti microbial, Anti fungal, Anti corrosion and UV Protection coating) on outer sidesandFSKfoilininternalsides withclosecellnotlessthan95% Rigid Cellular foam insulation of thickness (17mm for Internal Ducting) and material shall be Class O as per BS 476 Part 6 & Part 7 with 2 hours fire rating, with Density of 45± 3 kg/m3 and should have Thermal Conductivity0.023W/mK,Water absorptionshallbenotmorethan 0.03% as per EN 13403 standard and panel should be GreenPro , GRIHA & EPD&SGBCcertifed.Theductwork shouldbecapableofhandling pressures upto 2000 Pascals. The joint between the ducts shall be with Polymerslideintypejointbetween the ducts and all other polymer accessories to be of the same manufacturer. Measurement would be done on outer to outer. Supporting of ThreadedRod(6mm)&CChannel/ Wire supporting of reputed make recommended by Manufacturer to be provided.Manufacturertohave experience of more than 10 years of producing the same material in India. (Approved Makes : Asawa Insulation,AURA, P3) 353 For Duct sizes below 1200 mm (Ducting in Rectangular shape, above false ceiling areas) 354 Supply, installation of GI ducting work with necessary mounting supports as per SMACNA Standards 355 22 Gauge 356 20 Gauge 357 Drain piping: Providing and fixing of 25mmDiaHardPVCdrainwater piping with fittings, support and insulated with 6mm thick closed cell elastomericnitrilerubberinsulation complete as per specifications 358 Outdoor Stand Fabrication for OutdoorSplitUnits:Supply, fabrication and erection of Angle/channel/Flat iron stand, hangingarrangementforair conditioningmachinesincludingnut bolts of required size, making holes, fabrication, welding, cutting, etc. and paintingwithonecoatofredoxide paint & two coat of enamel paint as required as per specifications. 359 Bunch of Wires (WG-MA/BW) 360 Supplying and erecting PVC insulated PVCroundsheathedFR2.5sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 361 VRV/VRF Air conditioning 362 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300cfm capacitywithmaintainingthestatic pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete. 363 Existing wall /Core cut outs and otherassociatedworktoinstallref net piping from IDU to ODU complete is all respects 364 Carryingoutcorecuttingofsize3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specializedcorecuttingmachinein proper manner and finishing the site as original. 365 Supply,installation,testingand commissioningwirelessremote control having colour LCD panel, real time clock, temperature limitation (16 to30°C,functionslikefilterclean reminder timer suitable to communicate with wired controller complete. 366 Sub Estimate No. 13 -Structural strengthening of parking slot slab 367 Chipping of all loose and Spalling of concretetobottomofslab,beams etc.(whereverrequired),cleaningof reinforcement, carrying out thorough sandblasting,applicationof anti-corrosive zinc rich epoxy primer toexposedreinforcementincluding costofmaterial,labour,equipment, tools, scaffolding etc. complete. 368 Providing and applying one pack bondingcoatbetweenconcrete memberslikeRCCslabs,columns, beams,chajjas,pardisetcand cement mortar plaster using Hack Aid Plast of approved make & approved byEngineerincharge.Cleanthe concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a cleansurface.ApplyHackAidPlast ofapprovedmake&approvedby Engineerinchargebysprayonthe entireconcretesurface.Providea leancement-sanddashcoatover the same. Allow the dash coat to set foraround24hours.Further plasteringasperspecificationscan continue. 369 ProvidingRepairingofhoneycombs and minor damages with Polymer ModifiedMorterincluding material,labour complete in all respect. 370 P/fixing of carbon 100 mm x 1.4 mm carbon laminate with adhesive includingofallmanpowerand equipments complete in all respect 371 Providingsandfacedplaster externallyincementmortarusing approvedscreenedsand,inall positions including base coat of 15 mmthickincementmortar1:4 using waterproofing compound at 1Kilogramper cement bag curing the samefornotlessthan2daysand keepingthesurfaceofthebase coatroughtoreceivethesand faced treatment 6 to 8 mm thickin cement mortar 1:4 finishing the surfacebytakingoutgrainsand curing for fourteen days scaffoldingetc.complete. 372 Providing and applying two coats of exterior acraylic emulsion paint confirmingtocorrespondingI.S.of approved manufacture andof approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applyingprimer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 373 Epoxy for joint sealing of tiles 374 Sub Estimate No. 14 - Architectural Consultancy charges 375 Preparing layout, drawings, plans, detail drawings, colour combinations, sample chart preparation etc. All designing work required for the work including the preparation of electrical layout all complete.
Contract Date: Jul 23, 2025 Contract Value : ₹ 3.26 Crore
Government Departments No of Bidders 5
Maharashtra View Result →
40.
Heavy Industries and Public Enterprises #7514710 AOC
Tender For Internal Services Of Elv Work And Bms System For Csf -03 (Plot No-10), Sector-28, Yeaem-02 - Boom Barrier System 2 SITC of AutomaticElectromechanical BoomBarrierSuitable roadwidthupto 6meterforintensive applications,highspeedwith6 secondopening /closingtimewithAluminiumhousing &aluminium boomwithforkrest, IP67Protectionetc.(forGateEntry/Exit) Safetysensorstobeprovidedfor preventinganyaccidental damagewhileclosing,DriveUnit: Heavy DutyGearMotor. Intelligence: The barriershall useasuitableACDriveforsmoothfunctioning of theequipment.Possibility forintegration viastandarduserinterfaces. Power: 230+/-10%VAC,50Hz. PowerConsumption: Max60Watt, OperatingTemperature:-20Deg to60DegC, Certifications: ISO-9001:2015, CE, IP-67Certification fromGovernmentaccreditedlabetc all complete ApprovedMake:Speedgatz/SynergyAccess /Kaba 3 SITC of i5InfraredBeam Setetc all complete ApprovedMake:Speedgatz/SynergyAccess /Kaba 4 SITC of MountingPostforPE Sensoretcallcomplete ApprovedMake:Speedgatz/SynergyAccess /Kaba 5 SITC of HELIX Receiver,Two Channelsetc all complete ApprovedMake:Speedgatz/SynergyAccess /Kaba 6 SITC of Transmitter, Silicone2Buttonetcallcomplete ApprovedMake:Speedgatz/SynergyAccess /Kaba 7 Access Control System 8 SITC of Multi Modal Face Recognition cum Fingerprint, Smart Card & Password based Reader, 5 Touch Screen LCD, Android OS, 2GB RAM, 16GB ROM, 256 bit encrypted algorithm to protect important information such as personal info transmitted, Support TLS standard security communication protocols, Live Face Detection with anti-spoofing against 2D photograph, mobile selfie and video, Fake Fingerprint Detection Technology, 20,000 Face Storage capacity (1:N), 50,000 Fingers (1:N) / 2,00,000 Fingers (1:1), 10 million transaction storage, 20,000 Image logs, Onboard Dual Camera, supports Face authentication & verification from up to 3 meters, Communication protocols like TCP/IP, Wiegand Out / IN, RS 485, SD Card, Anti Pass back (Local / Global), Blacklist Employee Management, User wise authentication modes; Built in Lock Control; Mask Detection & Alert (configurable); Thermal Module integration for Body Temperature Detection (Optional), Up to 25,000 lux illumination, UL Listed Power Supply, CE, FCC, RoHS, BIS, WPC certifications etc. suitable for mounting on metal surface/metal frames/ wooden frames / wall / flap barriers or as required based on site conditions including all accessories complete as per specifications. Approved Makes: Secureeye/Essl /Timewatch/HID/ Honeywell/ Smart-I 9 SITC of Double leaf EM Lock with 1200LBS Collinear Load Test 560 kg,1200 lbs, Operated Voltage 12 / 24 / 48 V DC (optional), MOV Provides Reverse Current Protection, Suitable For Wooden Door, Glass Door, Metal Door, Fireproof Door, Anti-Residual Magnetism Designed High Strength Material, Anodized Aluminum Housing, Design with no Mechanical Bolt, CE Certified capacity etc all complete Approved Makes: Secureeye/Essl /Timewatch/HID/ Honeywell / Smart-I 10 SITC of EmergencyPushButtonformanual doorreleaseetcall complete ApprovedMakes: Secureeye/Essl /Timewatch/HID/ Honeywell/ Smart-I 11 SITC of ZLBracketfor600lbs EMLocketcall complete ApprovedMakes: Secureeye/Essl /Timewatch/HID/ Honeywell / Smart-I 12 Supply and layingof8core1.0mmCable. ApprovedMakes: POLYCAB/FINOLEX/BELDEN 13 Video Surveillance System (CCTV) 14 SITC of 5MPVandal-ResistantIR DomeCamerawithHeater,5MP(2592x1944) Resolution, Motorized Vari-focallens (f =3.6-10mm), ApertureF1.8-2.8, Min. [email protected], B/W :0 lux(IRLEDON),Dynamic Range120dB(TrueWDR), IR cutfilterwithautoswitch, IR Distance(LEDs): 30meter,Two-way audio, Alarm in/out, Exposure, WhiteBalance, Self-AdjustingVideo Mode(Sharpness, Contrast,Colors, BrightnessControl),VideoMotionDetection,ActiveTampering Alarm, TripZone,Video CompressionH.265, H.264(MP), M-JPEG, IPCameraProtocol DirectIP2.0, ONVIFProfileS, QuadrupleVideoStreaming, TriggerEvent: MotionDetection, Alarm in, Audio detection, Tampering, TripZone, EventNotificationRemoteS/W, Email (withImage),Micro SD/SDHC /SDXC, SmartFailover(Upto 256GB),IK10Vandal Proof Casing, IP67OutdoorReady, 3-axis mechanical designforinstallation, PowerSource:12VDC, PoE IEEE 802.3af (Class 3), Operating Temperature-40°C~60°C, OperatingHumidity0%~90%, Certification: BIS/UL, FCC,CE approval. MACAddress: TheMAC address of theproposedIPcamerasmustberegisteredinthesamenameof theOEM. TheIPCameraOEM mustconfirm thattheMACaddress of thesurveillancecameras; OUI mustbeinthenameof theOEM.etc all complete ApprovedMake:Mobotix/IDIS/Axis /Avigilon/Sony 15 SITC of 5MPVandal-ResistantIR BulletCamerawithHeater, 5MP(2592x1944) Resolution, Motorized Vari-focallens (f =3.6-10mm), ApertureF1.8-2.8, Min. [email protected], B/W :0 lux(IRLEDON),Dynamic Range120dB(TrueWDR), IR cutfilterwithautoswitch, IR Distance(LEDs): 30meter,Two-way audio, Alarm in/out, Exposure, WhiteBalance, Self-AdjustingVideo Mode(Sharpness, Contrast,Colors, BrightnessControl),VideoMotionDetection,ActiveTampering Alarm, TripZone,Video CompressionH.265, H.264(MP), M-JPEG, IPCameraProtocol DirectIP2.0, ONVIFProfileS, QuadrupleVideoStreaming, TriggerEvent: MotionDetection, Alarm in, Audio detection, Tampering, TripZone, EventNotificationRemoteS/W, Email (withImage),Micro SD/SDHC /SDXC, SmartFailover(Upto 256GB),IK10Vandal Proof Casing, IP67OutdoorReady, 3-axis mechanical designforinstallation, PowerSource:12VDC, PoE IEEE 802.3af (Class 3), Operating Temperature-40°C~60°C, OperatingHumidity0%~90%, Certification: BIS/UL, FCC,CE approval. MACAddress: TheMAC address of theproposedIPcamerasmustberegisteredinthesamenameof theOEM. TheIPCameraOEM mustconfirm thattheMACaddress of thesurveillancecameras; OUI mustbeinthenameof theOEM.etc all complete ApprovedMake:Mobotix/IDIS/Axis /Avigilon/Sony 16 SITCof32IPChannel NetworkVideoRecorder, H.2654K Recorder, NDAACompliant, Total incoming throughput370Mbps, SupportedCamera: DirectIP, AXIS, PANASONIC, ONVIF, VideoOutputs 2HDMI, RecordingResolutionUpto12MP(DependingonIPCamera),H.265, H.264VideoCompression, Recording ModeTime-lapse, Event, Pre-event, Panic,TriggerEvent:IDLA(ObjectDetection, Intrusion, Loitering,LineCrossing, FaceDetection),BI(ExceedOccupancyLimit, Social Distancing, MaskRule Violation, QueueCongestion), Motion, Trip-zone, Tampering, VideoLoss, AudioDetection, AlarmIn, NetworkAlarm, Text-in, System etc. SearchModeTime-lapse, EventLog, Text-in,Thumbnail,Metadata, HDD: 6SATA,4eSATA,RAID1Supported, EventNotification, Email (AttachClip(.cbf).MP4), CallbacktoRemoteS/W, PushNotification, Two-way Audio,2USB2.0, USB3.0, Embedded Linux,Built-in16channel PoE Switch,Expandableupto252TBusing eSATAstorage, NDAA Compliance, FCC, UL, CE,CBCertifiedetc all complete ApprovedMake:Mobotix/IDIS/Axis /Avigilon/Sony 17 SITCofSurvilliance Class harddiskof 6TB HDDetc all complete ApprovedMake:WD/Seagate/Toshiba 18 SITCofONVIFCompliantS&GVMS,CompatiblewithlinuxOS,VMSshouldhaveAninterfaceto definelayouts andpre-setcameras inmultipleviewmode, Ableto switchbetweendifferentviewpages anddevices, Zoom in/Zoomoutdigitallybymousescroll wheel ,Liveviewwithstream1infull screen modeorstream2inmulti-viewscreenmode(Bitrateadjustable)etc as requiredtocompletethesystem etcallcomplete ApprovedMake:Mobotix/IDIS/Axis /Avigilon/Sony 19 SITC of 55SmartAndroid4K UHDProfessional Display,24x7Operation, 440nits Brightness, Smart AndroidOS,4K UHDResolution, ScreenMirroringthrough, Airplay/Chromecast, DirectLED, 16Gb storage, Wi-Fi, 178DegreeViewing Angle, Landscape/Portrait/TiltInstallation, IP/RS232C Control, 10W+10WSpeakers, 4HDMI2.0, 2USB, PowerScheduling, 1200:1ContrastRatio,ColorGamut(DCI- P3) 92%, HDMIAutoWakeup. 4KHDR Visual Experiencethrough4KHDR ProcessorX1, 4K X-Reality PRO, TriluminosPRO, MotionflowXR,HDR10/HLG/Dolby Visionetc complete ApprovedMake:Sony/Christie/NEC / LG. 20 SITC of WorkstationwithIntel ProcessorI7orBetter,32GBMemory,400GB SSDforOS, 1TBHDDfor Local Storage, GigabitEthernet, DisplayCard4GB, WindowsOperatingSystem(64bit) withKeyboard, Mouseand21Monitordisplay etc complete ApprovedMake:HP/Dell /Lenovo 21 SITC of Category6UTPCable-LSZH, High-SpeedGigabitEthernetUTP250MHzClass E Cables for Cat6Consists of 23AWGSolidBareElectrolytic GradeCopperConductors,HDPE InsulatedTwisted4 Pair,RipCord, andLSZHOuterJacket, GigabitEthernet(1000Base-T),ULListed,RoHSCertifiedin existing concealed/surfaceconduits /Raceways complete305Mtr. Roll, includingPentaScanning for perCopperconnectitvitywithotherraletedtesting andservices (as peractual)asperspecificationetc. all complete ApprovedMake:Belden/3C3/Commscope/Siemon/ Derwiser/ Legrand 22 SITC of 19”RackMount, 12PortMulti ModeLIUPanel, preloadedwithapigtails,Splicetray & necessary fibermanagementaccessoriesetc all complete.as perspecificationetc. all complete ApprovedMake:Belden/3C3/Commscope/Siemon/ Derwiser/ Legrand 23 SITC of SC-LCMMFiberPatchCords( 3Mtr),LSZHjacket, meets IEC-60332-1(LSZH) flameratingfor standardsafety compliantas perspecificationetc. all complete ApprovedMake:Belden/3C3/Commscope/Siemon/ Derwiser/ Legrand 24 SITC of SC MM Pigtail(1.0Meter), LSZHjacket, meetsIEC-60332(LSZH) flameratingforstandard safetycompliant. as perspecificationetc. all complete ApprovedMake: Belden/3C3/Commscope/Siemon/ Derwiser/ Legrand 25 SITC of 6CoreMulti ModeOutdoorFiberOpticCable,HighLinkFiberOptic,Armoured,Multi loose Tube, OutdoorCable, Gel filled, CSMFRP,SingleSheathBlackHDPE,OM4,ROHSCertifiedwith OTDRScanningforOFC percoreconnectitvityanduplinktest forPointtoPointwithotherraleted testingandservices (as peractual) as perspecificationetc.all complete ApprovedMake:Belden/3C3/Commscope/Siemon/ Derwiser/ Legrand 26 SITC of RackMountableLayer2DistributionNetworkSwitch(forIPCCTV) withPOE+withMin24X 10/100/1000Base-T POE ports with2X1Gand2X1/10G(Min) SFP+ports upgradableto4x10G SFP+ports withminPOE budgetof380WorbetterwithFibretransrecievermoduleetc. all complete ApprovedMake:Cisco /Juniper/HP/AlcatelLucent 27 Supply, installation, testing&commissioningof IP55OutdoorJunctionBoxForFieldDevices at cameraside. JB mustbeofappropriatesizetohousedifferentcomponents asperCCTVsystemdesign confirming. 28 SITC of 10/100/1000portMulti modeopticalmedia converterasrequiredatsiteetc. all complete ApprovedMake:Cisco /Juniper/HP/AlcatelLucent 29 SITC of 4PortIndustrial GradeSwitchforPerimeterCamera, AdvancedIndustrial PoE capabilities with supportforHPoE (60W), IEEE 1588v2PTPsupport, Operatesat awidertemperaturerange, withstands greatershock,vibrations,surgeandEMI/EMCvariance,4RJ-4510/100/1000Base-T PoE+ports outof which2ports are60W PoE capable,2100/1000Base-X SFPports, RS-232Console (RJ45) all requiredaccessoriesetc. all complete ApprovedMake:Cisco /Juniper/HP/AlcatelLucent 30 SITC of 24U(W 600mm/D600mm) Floormountwithfrontglass door,backsteel doorandsidepanels, Accessories of rackWithlock&keyforall sidepanels &door,FanHousingUnitwith4fans, Cable manager4UHorizontal x8, Cantilevertray, ACmainChannel 06points 5Amp(PDU) ,EarthingKit, MountingHardware(Packof 10) as perspecificationetc.all complete ApprovedMake: Valrack/Netrack/CPMG/President/ APW/Poweride/Derwiser 31 VRV/VRF AC SYSTEM 32 OUTDOOR UNIT (VRV/VRF) 33 Supply Installation,Testing & Commissioningof modulartype Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for coolingand heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required.The unitshalldeliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. DSR-2019 (1) (Per [email protected]) 34 10 HP Heating & Cooling 35 12 HP Heating & Cooling 36 38(18+20) HP Heating & Cooling 37 40(20+20) HP Heating & Cooling 38 INDOOR UNIT-CASSETTE TYPE 39 Supply, installation, testing and commissioningoffollowing minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remotecontroletc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. DSR-2019(2)/(3) 40 4 WAY COMPACT CASSETTE UNITS 41 1.0 TR (353 CFM) 42 4 WAY CASSETTE UNITS 43 1.0 TR (459 CFM) 44 1.2 TR (600 CFM) 45 1.6 TR (812 CFM) 46 2.0 TR (830 CFM) 47 2.4 TR (865 CFM) 48 4.0 TR (1218 CFM) 49 INDOOR UNIT-DUCTABLE TYPE 50 Supply, installation, testing and commissioningoffollowing minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. DSR-2019(4) 51 Mid Static Ductable units (minimum 45 pascal external static pressure) 52 DUCTED UNIT 53 2.6 TR (883 CFM) 54 3.4 TR (1130 CFM) 55 4.0 TR (1377 CFM) 56 COPPER REFRIGERANT PIPING 57 Supply, Installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-Oclosedcellelastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required. DSR-2019 (5) 58 6.4 mm dia(OD)(Soft drawn) withtube thickness 1.2 mm with 19 mm thickinsulation 59 9.5 mm dia (OD) (Soft drawn) withtube thickness 1.2 mm with 19 mm thickinsulation 60 12.7 mm dia (OD) (Soft drawn) withtube thickness 1.2 mm with 19 mm thick insulation 61 15.86 mm dia (OD) (Soft drawn) withtube thickness 1.2 mm with 19 mm thick insulation 62 19 mm dia (OD) (Hard drawn) withtube thickness 1.2 mm with 19 mm thick insulation 63 22.2 mm dia (OD) (Hard drawn) withtube thickness 1.2 mm with 19 mm thick insulation 64 28.58 mm dia (OD) (Hard drawn) withtube thickness 1.2 mm with 19 mm thick insulation 65 34.9 mm dia (OD) (Hard drawn) withtube thickness 1.62 mm with 19 mm thick insulation 66 41.27 mm dia (OD) (Hard drawn) withtube thickness 1.62 mm with 19 mm thick insulation 67 NOTE:-1)The Copper Piping & Piping Circuit should be with Minimum Number of joints, which shall be attained by :(i) Using One End Expanded Tubes(ii) Bending the tubes instead of using elbow joints wherever 90 degree bending is required.(2) Piping should be routed at site in such a manner, that brazed joints in the refrigeration piping are kept to a minimum.(3) The makes of tube fittings shall be same as that of tubes.(4) The thickness of fittings used shall be same as that of the pipe. 68 Central Remote Controller for VRV/VRF System:- Supplying, fixing, testing and commissioning of Main centralized controller( I- Touch Manager) suitable for groups of indoorunits to be installed for control. (BMS Compatible). Y-10.1 69 Supply, laying , testing and commissioning of 2C x 1.5 sq.mm copper conductor shielded cable in conduit. (Communication cable). Y-10.2 70 Supply, laying and fixing of conduit work including bends, junction boxes, pull wire, surface or concealed conduit work including necessary civil work such as chasing , concealing and making good and or necessary SS clamples, saddles and screws for fixing of conduit: (Conduit for communication cable). 25 mm dia 16G MS conduit. Y-10.3 71 DRAIN PIPES OF INDOOR UNITS:Supplying, laying, fixing, testing & commissioning of composite UPVC pipes density not less than 10 kg/m3 complete with 9 mm thick nitrile insulation all necessary fittings such as elbows, tees, reducers U-trap, supports, clamps etc. as per specification & drawings. Y-10.4 72 25 mm dia 73 32 mm dia 74 DUCTING, INSULATION & AIR DISTRIBUTION SYSTEM 75 Factory Fabricated Ducting :- Supply,installation,balancingandcommissioningoffactory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Based on DSR-2022 (16.12.1.1) (a) Thickness 0.63 mm sheet 76 Volume Control Duct Damper :- Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Based on DSR-2022 /16.13 77 Supply Air Grills :- Supplying&fixingofpowdercoatedextrudedaluminium Supply Air Grills with aluminium volume control dampers as per specifications. Based on DSR-2022 /16.15 78 ReturnAirGrills:- Supplying&fixingofpowdercoatedextrudedaluminium ReturnAirGrillswithlouversbutwithoutvolumecontrol dampers complete as required. Based on DSR-2022 /16.16 79 Duct Acoustic Lining with Nitrile Rubber foam- Class-1:- Supplying, Fixing,testing and commissioning of Open cell nitrile rubber foam having microban anti-microbial product protection, of 10mm thickness and of 140-180 kg / m³ density cut to required sizes and to be stuck to the inside of duct surfaces with approved adhesive. Y-10.5 80 Nitrile rubber insulation :- Supplyingandfixingoffollowingthicknessdulylaminated aluminum foilof mat finish closed cell Nitrile rubber (Class O) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulationcomplete as per specifications and as required. Based on DSR-2022 /16.23.1.(A) 19mm 81 BMS System 82 SITC of BMS Computer System: i7 Processor, 2.93GHz, 4MB Cache with 8 GB RAM, & 1 TB HDD, 10/100 Mbps Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 10 OS Professional Enterprise, 100/1000 Mbps NIC for Network connection and anti virus software with 32 colour graphics monitor as per Tender Specifications. Accessories included Optical Mouse, Key Pad with the above BMS System configuration. Windows Licensed software compatible with the BMS platform etc. complete as required. Makes (Dell/HP/Samsung/LG) 83 SITC of the window based graphical software for IBMS system with 3 Nos Client for Operator workstation. The software shall not need additional license for future expansion also. The following software packages shall have below minimum features and compliances. a) 3D & Scalable Vector Graphics (SVG) technology dynamic graphics with Autocad import of plan with Zoom In & Zoom Out facility b) BTL,UL,EN Certified System. c) HTML5 based Web-Server software shall permit use of Standard Web-Browsers such as Microsoft Edge, Google Chrome, Mozilla Firefox, etc d) Cybersecurity TLS 1.3, Seamless integration of Security certificates within customer IT infrastructure, Microsoft’s active directory-based authentication, Use of network infrastructure that supports physical network or VLAN segmentation, End-toend encryption from client to server, End-to-end encryption between servers, Certificate-based data exchange, Encrypted backups 84 e) Software shall have audit trail feature and Cricital alarms shall be sent over Email. f) Ability to provide data to other systems through MQTT and / Or REST web services interface as an optional feature.( if required in future) g) Reports - Customized reports for Trends and alarm with Graphic screen shots.h) Alarm Escalation: Assisted treatment of alarms which helps in Predefined & fast intervention steps for faster response. Minimum number of active and viewable alarms shall be 10,000. It shall be possible for the user to sort, filter and search on anyavailable criteria such as priority, category, origin, alarm type, etc. On alarm, it shall be possible to notify via email to a preconfigured list of recipients . through a Simple Mail Transfer Protocol (SMTP) or secure email using Simple Mail TransferProtocol Secure (SMTPS). No special software interfaces shall be required and no email client software must be running inorder for email to be distributed.i) The software should natively communicate with three of the most popular standards for buildings: BACnet, LonWorks, and Modbusj) User Intuitive Dashboards. 85 SITC of True IP Based DDC Controllers 32 Bit Intelligent, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-portEthernet switch . The controller shall have minimum 12 inputs/outputs inbuilt. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 32 MByte NOR Flash memory. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). Note: Comissioning tool should not be dependent on any hardware dongle. The above shall be housed in vandal proof, lockable & secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion. 86 a Electrical System 87 b Plumbing System 88 SITC of True IP Based BTL & UL Listed for third party integration. The controller shall have 2-port Ethernet switch and WLAN interface. It should have BTL Certified as B-BC and consisiting of dual core CPU 300MHz frequency and are with 512Mb DDR3 SDRAM microprocessor with Storage capacity of 4 GByte. It should support Real Time clock with backup of upto 7 Days using super capacitor. It should Support of the major communication protocols: BACnet,/IP, BACnet MS/TP, Modbus IP and Modbus RTU upto 2000 points. Note: 3rd party make integrator is not acceptable. 89 VRV ODU 90 DG 91 Field instruments 92 Supplying, installing, testing and commissioning of the following sensors / transducers / transmitters. The DDC shall support sensor with DC 0...20 mA or 4...20 mA, DC 0 ... 10 V, Pt 1000 , NTC 10k, NTC 20k, NTC 1.8K, PT 100 Ohm. All sensors should be UL Listed. 93 Water Tank Level Switch 94 Cable & Conduits 95 Supplying, laying, termination, testing and commissioning of Communication cables. (2 core x 1.5 Sq.mm), PVC insulated, shielded twisted copper conductor Armoured cable. 96 Supplying, laying, termination, testing and commissioning of power cables. (3 core x 1.5 Sq.mm), PVC insulated, shielded twisted copper conductor Armoured cable. 97 Supplying, laying, termination, testing and commissioning of CAT6 Armoured cable 98 Network Switches 99 Supply, installation, testing and commissioning of Layer 2/3 switch with 24 ports (RJ-45) including SFP modules, rack mountable, SMPS power supply & other termination accessories (Like Pigtails/LIUs/ Convertors/Splicing equipment ,Patch panel, Patch Cord, Etc) complete as per specifications and as required for BMS DDC Panel Networking. The switch to switch distance shall not exceed beyond 80 meters. (Make:-Dlink/ Cisco / HP / Avaya/ Tyco / Panduit / Molex )
Contract Date: Jun 24, 2025 Contract Value : ₹ 1.10 Crore
Government Departments No of Bidders 2
Uttar Pradesh View Result →
41.
Housing Urban and Rular Development #7448018 AOC
Supply, Installation, Testing and Commissioning of IT, Telecom, CCTV Surveillance System, Audio Conference System, UPS System, and Allied Infrastructure for Maharaja Manindra Chandra PG Campus of Murshidabad University at Berhampore, Murshidabad - 742 101 [Job No: KIT/OW/001 of 25-26]- 1 Supply and Laying of PVC conduits(ISI marked) or PVC Casing laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Ref. Make: Precision, Presto Plast, Supreme, Oriplast;Quality : ISI Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 2 Supply and Laying of HDPE Pipe (ISI marked) with all accessories as required for the entire system with all OEM accessories as per the site requirement. DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. Dia: 25mm (OD-25mm & ID-21mm) Ref. Make: Precision, Presto Plast, Supreme, Oriplast; Quality : ISI Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 3 Cutting channel, conceal, concrete/soil filling of 43 mm x 43 mm size on masonry wall incl. Supplyheavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire with mending good damages to building works PVC conduits(ISI marked) 25 mm dia 3 mm thick polythene pipe without earth continuity wire as per direction of EIC. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 4 SITC of Layer 3, Stackable, fully managed, 1RU, GE Switch to be operated on 200-240VAC, 50 Hz Supply, with perpetual license of OEM, having minimum technical specification: a) 24 x 1GBase-F SFP enabled host ports (Minimum); b) 4 x 10GBase-F SFP uplink port including stack/dack module and cable; c) Forwarding performance/stacking bandwidth/ backplane speed (Minimum) of 101.1 Mpps; d) Fanless operation with operating temperature up to 50°C; e) DRAM and Flash RAM as per OEM; f) Software support with IPv4 routing (542 routes), multicast routing (IGMP) including necessary software license; g) Minimum switching capacity of 136Gbps; h) Number of VLAN Supported: 64 (Minimum).; i) Total number of MAC Address: 32,000 (Minimum); j) Minimum Security: User privilege management and password protection, DoS attack defense, ARP attack defense, and ICMP attack defense, Binding of the IP address, MAC address, interface, and VLAN, Port isolation, port security, and sticky MAC, MFF, Blackhole MAC address entries, Limit on the number of learned MAC addresses, 802.1x authentication and limit on the number of users on an interface, AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC, SSH v2.0, Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist; Access Security: DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security; k) Others: Applicable standards: IEEE 802.1p: CoS prioritization , IEEE 802.1Q: VLAN tagging, IEEE 802.1X: Port Access Control, IEEE 802.3: 10BASE-T, IEEE 802.3u: 100BASE-T,IEEE 802.3ab: 1000BASE-T, IEEE 802.3z: 1000BASE-X,IEEE 802.3af: Power over Ethernet, IEEE 802.3at: Power over Ethernet Plus, IEEE 802.3x: Pause Frames/Flow Control, IEEE 802.1D: Spanning Tree Protocol, IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP), IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol, IEEE 802.3ad: Link Aggregation Control Protocol; l) REGULATORY: RoHS, WEEE, IEC 61000-4-2:2008, CISPR Class, ICES-003 Class A,UL,CSA 22.2,FCC,EN 300 386, CCC, ICES -003, CB. The OEM should have 24x7 TAC support center with India toll free number reflected in official website. Ref. Make: Zyxel, Radwin, Juniper, Extreme, Huawei, Aruba, Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 5 SITC of 24Port, Layer 3, PoE enabled, with PD: minimum 370 Watt (should have minimum 15.4 Watt per Port), Full managed only, 1RU, GE Switch to be operated on 200-240VAC, 50 Hz Supply, with perpetual license of OEM, having minimum technical specification: a) 24 x 10/100/1000Base-T Mbps PoE+ enabled host ports (Minimum); b) 4 x 10GBase-F SFP with 2 x 10G Multi-Gigabit (1G/2.5G/5G/10G) RJ-45 PoE++ (60 W) uplink ports; c) Forwarding performance/stacking bandwidth/ backplane speed (Minimum) of 125 Mpps; d) Fanless operation with operating temperature up to 50°C; e) DRAM and Flash RAM as per OEM; f) Software support with IPv4 routing (542 routes), multicast routing (IGMP) including necessary software license; g) Minimum switching capacity of 168Gbps; h) Number of VLAN Supported: 64 (Minimum).; i) Total number of MAC Address: 32,000 (Minimum); j) Minimum Security: User privilege management and password protection, DoS attack defense, ARP attack defense, and ICMP attack defense, Binding of the IP address, MAC address, interface, and VLAN, Port isolation, port security, and sticky MAC, MFF, Blackhole MAC address entries, Limit on the number of learned MAC addresses, 802.1x authentication and limit on the number of users on an interface, AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC, SSH v2.0, Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist; Access Security: DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security; k) Others: Applicable standards: IEEE 802.1p: CoS prioritization , IEEE 802.1Q: VLAN tagging, IEEE 802.1X: Port Access Control, IEEE 802.3: 10BASE-T, IEEE 802.3u: 100BASE-T,IEEE 802.3ab: 1000BASE-T, IEEE 802.3z: 1000BASE-X,IEEE 802.3af: Power over Ethernet, IEEE 802.3at: Power over Ethernet Plus, IEEE 802.3x: Pause Frames/Flow Control, IEEE 802.1D: Spanning Tree Protocol, IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP), IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol, IEEE 802.3ad: Link Aggregation Control Protocol; l) REGULATORY: RoHS, WEEE, IEC 61000-4-2:2008, CISPR Class, ICES-003 Class A,UL,CSA 22.2,FCC,EN 300 386, CCC, ICES -003, CB. The OEM should have 24x7 TAC support center with India toll free number reflected in official website. Ref. Make: Zyxel, Radwin, Juniper, Extreme, Huawei, Aruba, Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 6 SITC of Intercommunication Communication System with all necessary power accessories: EPBAX system with line: 3PNT(Minimum) No; Extension: 36 Line Analog, 30ISDN PRI with 40 SIP license or Extensions with Expendable up to 48 Analog Extensions with all necessary power accessories; Other Features: Hotline, Live Call Supervision, Auto Call Back, Automatic Call, Disconnector, Auto Redial, Call Splitting, Call Conference, Direct Inward Dialling, External Call Forwarding, Executive/ Secretary etc. Ref. Make: Cisco, Unify, Avaya, Matrix, NEC, Progility, Syntel, Signtel, Neron Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 7 SITC of POE SIP Telephone Set, having minimum technical specification: Graphical Display, Context Sensitive and Fixed Function Keys, Full Duplex Speakerphone with AEC, VAD, CNG, TLS/SRTP for Voice Security, Integrated PoE (802.3af), IPv6 Ready, PC and LAN Ports, LED for Incoming/Ongoing Call, MWI, Mute, Hold, Intuitive User Interface with Icons and Soft keys, Caller ID with Name, Number, 2 x 10/100 Mbps LAN & PC Ports, 1 x RJ9 Handset Port, 1 x RJ9 Headset Port, Local Phonebook up to 1000 entries Black List, Call History: Dialed/Received/Missed/Forwarded, Intelligent Search. Ref. Make: Cisco, Progility, Unify, Avaya, Matrix, Bettel, NEC, Syntel, Signtel, Neron Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 8 SITC of Digital Operator Console Set, having minimum technical specification: Tiltable display (pixel, type): 6 lines, 240 x 128 pixels, monochrome; Backlit display: Yes (LED); Fixed function keys (pushbuttons, partly illuminated: 8, 6 red LEDs; Freely programmable keys: 6 sensor keys with red LEDs; Additional optical call alert: Red; Navigation: 5-way navigator; Open listening: Yes; Full duplex handsfree: Yes; Echo suppression for local echo (AEC); full duplex: Yes; Line interface: (CorNet-TS protocol, software download via UP0/E), UP0/E;Wall mounting kit: Yes; Operating conditions: +5 °C to +40 °C (+41 °F to +104 °F); Safety standards: IEC60950-1, EN60950-1, UL60950-1, CAN/CSA-C22.2 No.60950-1; EMC standards: CISPR22 Class B, CISPR 24, EN55022 Class B, EN55024, FCC Part 15 (CFR 47) Class B; Ref. Make: Cisco, Progility, Unify, Avaya, Matrix, NEC, Syntel, Signtel, Neron Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 9 SITC of IP 4MP IR Bullet Camera (complete with perpetual license) with with Motorized Varifocal lens and Inbuilt Microphone having minimum technical specification: Image Sensor: 1/2.9” Progressive Scan CMOS; Min. Illumination: Color: 0.005 Lux @(F1.5, AGC ON), 0.005 lux @(F1.5, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 104°-29°, Vertical FOV: 54°-16°, Diagonal FOV: 125°-33°; Aperture: F1.5 with Auto focus; Lens Mount: Ø14; IR Range: 40 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265 or higher; Video Bit Rate: 128 Kbps to 8 Mbps; Bit Rate: Control CBR/VBR; Image Max. Resolution: 2688 × 1520, 50Hz: 30fps; Audio: Built-in dual Mic, Built-in speaker; Audio Compression: PCM; G.711a; G.711Mu; G.726; G.723; Intelligence: IVS (Perimeter Protection): Tripwire, intrusion (support the classification and accurate detection of vehicle and human); SMD 3.0: Less false alarm, longer detection distance; Face Detection: Face detection; track; snapshot; snapshot optimization; optimal face snapshot upload; face enhancement; face exposure; face snapshot set as face or one-inch photo; 3 snapshot strategies (real-time snapshot, optimization snapshot, and quality priority); face angle filter; optimization time setting; Image Enhancement: BLC/3D DNR/HLC; Image Setting: Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser; Day/Night Switch: Day/Night/ Auto/Schedule/Triggered by Alarm In; Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD full, HDD error, Alarm input, Alarm output; Alarm output Protocols: TCP/IP, ICMP, HTTP, etc; Edge Analytics: line crossing, region entry/exit, intrusion, video blur, Perimeter Protection, etc; Simultaneous Live View: Up to 4 channels; User/Host: Up to 20 users, 3 levels: Administrator, Operator and User; Interface: 1 input (line in, 3.5 mm), 1 output(3.5 mm), single track / 1 RJ45 10M/100M self-adaptive Ethernet port / 1 input, 1 output (max. 12 VDC, 30 mA) / 1Vp-p composite output (75 Ω/BNC) / Built-in Micro SD/SDHC/SDXC slot, up to 128 GB / H.264 encoding supports; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP67, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License and pole Mounting Bracket for Camera (if required as per site). Ref. Make: Honeywell, Infinova, Panasonic, Dahua, Hikvision, Alcon, Equivalent Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 10 SITC of IP 4MP IR Dome Camera (complete with perpetual license) with with Motorized Varifocal lens and Inbuilt Microphone having minimum technical specification: Image Sensor: 1/2.9” Progressive Scan CMOS; Min. Illumination: Color: 0.005 Lux @(F1.5, AGC ON), 0.005 lux @(F1.5, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 104°-29°, Vertical FOV: 54°-16°, Diagonal FOV: 125°-33°; Aperture: F1.5 with Auto focus; Lens Mount: Ø14; IR Range: 40 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265 or higher; Video Bit Rate: 128 Kbps to 8 Mbps; Bit Rate: Control CBR/VBR; Image Max. Resolution: 2688 × 1520, 50Hz: 30fps; Audio: Built-in dual Mic, Built-in speaker; Audio Compression: PCM; G.711a; G.711Mu; G.726; G.723; Intelligence: IVS (Perimeter Protection): Tripwire, intrusion (support the classification and accurate detection of vehicle and human); SMD 3.0: Less false alarm, longer detection distance; Face Detection: Face detection; track; snapshot; snapshot optimization; optimal face snapshot upload; face enhancement; face exposure; face snapshot set as face or one-inch photo; 3 snapshot strategies (real-time snapshot, optimization snapshot, and quality priority); face angle filter; optimization time setting; Image Enhancement: BLC/3D DNR/HLC; Image Setting: Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser; Day/Night Switch: Day/Night/ Auto/Schedule/Triggered by Alarm In; Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD full, HDD error, Alarm input, Alarm output; Alarm output Protocols: TCP/IP, ICMP, HTTP, etc; Edge Analytics: line crossing, region entry/exit, intrusion, video blur, Perimeter Protection, etc; Simultaneous Live View: Up to 4 channels; User/Host: Up to 20 users, 3 levels: Administrator, Operator and User; Interface: 1 input (line in, 3.5 mm), 1 output(3.5 mm), single track / 1 RJ45 10M/100M self-adaptive Ethernet port / 1 input, 1 output (max. 12 VDC, 30 mA) / 1Vp-p composite output (75 Ω/BNC) / Built-in Micro SD/SDHC/SDXC slot, up to 128 GB / H.264 encoding supports; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP67, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License and pole Mounting Bracket for Camera (if required as per site). Ref. Make: Honeywell, Infinova, Panasonic, Dahua, Hikvision, Alcon, Equivalent Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 11 SITC of Enteprise Grade 16TB, 12 Gb/s SAS Hard Disk Drive with minimum 7200 rpm for video storage, having minimum technical specification: Features: Helium Sealed-Drive Design: Yes; Conventional Magnetic Recording (CMR): Yes; Protection Information (T10 DIF): Yes; SuperParity: Yes; Low Halogen: Yes; PowerChoice Idle Power Technology: Yes; PowerBalance Power/Performance Technology: Yes; Hot-Plug Support: Yes; Cache, Multi-segmented (MB): 256; Organic Solderability Preservative: Yes; RSA 3072 Firmware Verification (SD&D): Yes; Reliability/Data Integrity: Mean Time Between Failures (MTBF, hours): 2,500,000; Reliability Rating @ Full 24×7 Operation (AFR): 0.35%; Non-recoverable Read Errors per Bits Read: 1 sector per 10E15; Power-On Hours per Year (24×7): 8,760; 512e Sector Size (Bytes per Sector): 512, 520, 528; 4Kn Sector Size (Bytes per Sector): 4,096, 4,160, 4,224; Limited Warranty (years): 5; Performance: Spindle Speed (RPM): 7,200 RPM; Interface Access Speed (Gb/s): 12.0, 6.0, 3.0; Max. Sustained Transfer Rate OD (MB/s, MiB/s): 261/249; Random Read/Write 4K QD16 WCD (IOPS): 170/550; Average Latency (ms): 4.16; Interface Ports: Dual; Rotation Vibration @ 20-1500 Hz (rad/sec²): 12.5; Ref. Make: SEAGATE, WESTERN DIGITAL, HITACHI, Sony Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 12 SITC of 32 Channel, IP 4K NVR having minimum technical specification: Video Input: 32 Channel IP Fully Featured NVR; Audio Iuput/Output: 1 Channel Input/2 Channel Outputs, RCA; Display Interface: 4 HDMI (HDMI1 and HDMI2 is 4K, HDMI3 is 8K, HDMI4 is1080p); 2 VGA; Display Split: Main screen: 1/4/8/9/16/25/32, Sub screen: 1/4/8/9/16/25; OSD: Camera title; Time; Video loss; Camera lock; Motion detection; Recording; Compression: H.265+/H.265 or higher; Audio Compression: G.711a; G.711u; PCM; G726; Resolution: 32 MP, 24 MP, 16 MP, 12 MP, 8 MP, 5 MP, 4 MP, 1080p, 720p, D1, CIF, QCIF; Frame Rate: 1–15 fps (12 MP and 8 MP); 1–25/30 fps (rest of the resolutions); Network Bandwidth: 1024 Mbps incoming, 1024 Mbps recording and 1024 Mbps outgoing; Bit Rate: 16 kbps ~ 20 Mbps, per channel; Recording Mode: Schedule (Regular/Continuous, Motion Detection, Alarm); Manual; Stop; Trigger Events: Recording; PTZ; Tour; Alarm; Video Push; Email; FTP; Snapshot; Buzzer; Video Detection: Motion Detection—MD Zones: 396 (22 × 18); Video Loss; Camera Blank; AI Features as Recorder: Face detection; face recognition; perimeter protection; SMD Plus; Perimeter Protection: 24 channels; Face Database Capacity: Up to 40 face databases with 300,000 images; SMD Plus by Recorder: 32 channels; Storage: Internal HDD: 8 SATA ports (minimum), HDDs expandable: minimum 128 TB or higher (16 TB each or higher, Hard Disk Not Included); Audio and Video: Access Channel: 32; Decoding Capability: 2-channel 32 MP@20 fps; 2-channel 24 MP@20 fps; 4-channel 16 MP@30 fps; 5-channel 12 MP@30 fps; 8-channel 8 MP@30 fps; 12-channel 5 MP@30 fps; 16-channel 4 MP@30 fps; 32-channel 1080p@30 fps; Sync Recording Playback: up to 16 Channel (maximum 4-ch @ 8MP, 8-ch @ 4MP, or 16-ch @ 1080p simulateous playback); Search Mode: Time/Date; Alarm; Motion Detection (MD); Exact Search (accurate to a second); Smart Search; Playback Function: Play; Pause; Stop; Rewind; Fast play; Slow play; Next File; Previous File; Next Camera; Previous Camera; Full Screen; Repeat; Shuffle; Backup selection; Digital Zoom; Network: Ethernet: 2 x RJ-45 port (10/100/1000/2500 Mbps); Supported Protocols: HTTP; HTTPS; TCP/IP; IPv4/IPv6; UDP; SNMP; NTP; DHCP; DNS; SMTP; UPnP; IP Filter; PPPoE; FTP; DDNS; Alarm Server; IP Search; Multicast; P2P; Auto Registration; iSCSI; Cascading: Built-in CMS to Monitor and Manage Multiple Matrix NVRs; ONVIF and Major Camera Brands Support; Usb Port: 4; RS232: 1 port (for PC communications and keyboard). Temperature: -10 ºC ~ +55 ºC; REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software, HDMI Cable, Wireless Mouse and Keyboard and others accessories as per site requirement. Ref. Make: Honeywell, Infinova, Panasonic, Dahua, Hikvision, Alcon, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 13 SITC of Desktop Computers, having minimum technical specification: Processor: Intel Core i3-14500 or Higher; Chipset: Intel Q670 or higher, 2 DIMM slots or higher and minimum 4 PCIe series expansion slots; RAM: DDR5 16(1x16) GB 5200MHz with support for expansion upto 64 GB; Hard Disk: 1 x 512GB M.2 Gen4 PCIe NVMe SSD or higher; Integrated Graphics: UHD Intel Graphics 770 or higher; Dedicate Graphic Card: 4GB, DDR6, Nvidia Quadro T400; Management: Intel vPro (Optional); Operating System: Windows 11 Pro 64Bit preloaded with latest build along with recovery media; Networking Interface: Integrated Gigabit 10/100/1000; Connectivity: Integrated Dual Band Wi-Fi 802.11 a/b/g/n/ax and Bluetooth 5.3 Combo or higher; Optical Drive: Integrated RW/DVD Drive; Display: Nill; Audio: Integrated Audio controller with Internal speaker; Keyboard: Standard Keyboard; Mouse: Optical Scroll Mouse; USB/HDMI/VGA Ports: Integrated HDMI Port: Minimum 1 no, Integrated VGA / Display Port: Minimum 1 no, Integrated USB Port: Minimum 8 nos (Min 4 nos of 3.1 Gen-1), out of 8 Nos minimum4 in front, 4 in back and should be easily accessible; Security: Hardware based TPM 2.0, chassis Intrusion switch / Intrusion Sensor with chassis physical security cable lock slot; SMPS: Minimum 400 W or above; Cabinet Form Factor: SFF/Tower; Certification and Compliance: Windows 10 Pro Certification for the quoted desktop model, EPEAT India for the quoted desktop model, Minimum Energy Star 5.0 & TCO Certification for both Monitors and Desktop model, ISO 9001 and 14001 Certified for OEM India Unit; Inclusive of MOUSE Pad, Dust Cover. To be Installed at Site. Ref. Make: Dell, HP, Acer, Lenovo, VOLTRIQ Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 14 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification: Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 440cd/m^2 or nits or higher, Contrast Ratio (Static): 1200:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 6 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Connectivity: HDMI 2.0, USB2.0, DVI-D, Display Port, M3, RJ-45, RS232C; Networking Interface: Integrated Gigabit 10/100/1000; Video Input: HDMI 2.0, Audio In: Stereo mini Jack, DVI, HDMI; Audio Out: Stereo mini Jack; Power consumption typical (w/h): as per OEM, Operating Temperature: 0℃~ 40℃, Humidity: 10~90%, IP Rating: IP 5x; Others: auto source switching; Certification: BIS, FCC UL. Including HDMI Cable and Wall mount/Floor stand/swivel fixing arrangement with All other Accessories as per site requirement. Ref. Make: Panasonic, Delta, Nec, Sony, Samsung, Sharp, LG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 15 SITC of Indoor or Outdoor GI fixing of Wall, Pole mount or Waterproof Hard PVC Wall for CCTV Camera with all Other Accessories with Three Years Warranty having minimum technical specification: Ref. Make: Honeywell, Infinova, Panasonic, Dahua, Hikvision, Alcon, Equivalent Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 16 SITC of 1GBase-F Multi Mode modular and field replaceable SFP module of same rating of Ethernet Switch and OEM Ref. Make: Zyxel, Radwin, Juniper, Extreme, Huawei, Aruba, Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 17 SITC of Networking Horizontal Single Sheathed unArmoured Cable, 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 18 SITC of Networking Horizontal Double Sheathed Helical Steel Armoured Cable, 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, S/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 19 SITC of 06 Core, 50/125 Micron, OM3 Multi Mode Uni Tube Double Sheathed Corrugated Steel Armoured Fiber Optic Cable having minimum technical specification. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 20 SITC of CAT6, U/UTP, Indoor Information Outlet with RJ45 adapter, Single face cover plate and backbox etc having minimum technical specification Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 21 SITC of CAT6, SF/UTP, Outdoor Information Outlet with RJ45 adapter Outdoor type weatherproof boxes having minimum technical specification. Outdoor type weatherproof boxes for camera cable connectors and base mounting I/O, IP 56/66. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 22 SITC of PATCH CHORD Category 6 4-Pair, U/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 1 MTR LENGTH 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 23 SITC of PATCH CHORD Category 6 4-Pair, U/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 2 MTR LENGTH 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 24 SITC of CAT 6 SF/UTP 24 Port Modular Fully Loaded Patch Panel ISO 11801 AMD 1 Class EA TIA-568-C.2 Cat 6 ANSI/EIA-1069-A IEC 60603-7 Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 25 SITC of WALL Mounted Cross Connect Equipments Network Rack, having minimum technical specification: 12U x 600 x 500 Rack - Front Glass Door with Cam Lock - Fan Unit of 90CFM / 230 Volt - 1no - 6 Way 5A PDU, along with input Cable - 1no . Hardware packet of 20-3 No., Ref. Make: Tata, Vertiv, Netrack, Legrand, Rittal, APW, MRS Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 26 SITC of Floor Mounted Cross Connect Equipments Network Rack, having minimum technical specification: 42U x 800 x 800/500 Rack - Front Glass Door with Cam Lock - Fan Unit of 360CFM(Min) / 230 Volt - 4no - 6; Way 5A PDU, along with input Cable - 2no - H/w Packet of 20 - 8no - 1U PVC Cable Manager - 6no. Ref. Make: Tata, Vertiv, Netrack, Legrand, Rittal, APW, MRS Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 27 SITC of Multi Mode LIU, 24F, 1U Drawer shelf, Fully loaded with SC, OM3 Pigtails, Adapters, Splice Trays, Fiber Management Rings and Splice Slvees. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 28 SITC of Multi Mode LIU, 12F, 1U Drawer shelf, Fully loaded with SC, OM3 Pigtails, Adapters, Splice Trays, Fiber Management Rings and Splice Slvees. Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 29 SITC of 10Gb Duplex Multi mode 50/125 OM3 LSZH Armoured Fiber Patch Cable, SC-SC/ SC-LC/ LC-LC as per sites requirements - 3 MTR Ref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiser, R&M Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 30 SITC of 5 pair Armoured Telephone Cable {0.5mm.Dia (Minimum)} Ref. Make: Delton, Netco, Belden, Fenolex, Pollycab Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 31 SITC of 50 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete with all accessories. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 32 SITC of Wall Mount Speaker with all necessary power accessories, having minimum technical specification: System Type: 2-way, Bass-reflex; Components: LF: 5.25 woofer with woven fiberglass cone, HF: 0.75 PEI diaphragm tweeter with fluid cooling; Frequency Range: (-10dB) 60Hz-20kHz; Crossover Frequency: 15kHz; Impedance: 8 ohms (THRU setting); Crossover Type: 2nd order low-pass, 3rd order high-pass; Coverage Angle (Horizontal x Vertical): 100° x 100°; Nominal Impedance: 8Ω; Transformar Taps: 70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W Insertion Loss <0.94 dB at any tap setting Thru Setting: 8Ω nominal; Power Rating: NOISE: 100W; PGM: 200W; MAX: 200W; Sensitivity (1W, 1m): 90dB SPL, 1W/1m (ave. 100 Hz – 10 kHz); Maximum SPL (Caluculated, 1m): 110 dB ave. Continuous Pink Noise (116 dB peak); Connectors: 2 pairs of barrier strip (parallel-wired); Material, Finish, Color: Black, White; IP Rated: IP44 or higher, OEM certificate in their own letterhead to be provided for IP rating confirmation; Certificate: ROHS-compliant; Transformer UL Recognized per; Accessories: Owners Manual, Retaining knob, Terminal cover screw, Wall / Ceiling mount bracket, Terminal cover. Ref. Make: Yamaha, Bosch, JBL, Studiomaster, Sonodyne, L-Acoustics, D&B, Martin Audio, Adonis Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 33 SITC of Power Amplifier having minimum technical specification: Multichannel Amplifier2 channels X 300W output, Built-in 70V and 100V, Number of Output Channels: 2 Insertion Loss (70V & 100V outputs) :1 dB maximum, Input Sensitivity (8 Ω Load) :Balanced line input: 75mV, Frequency Response (8Ω, 20Hz - 20kHz , tone controls:+/- 1.0 dB, Total Harmonic Distortion (THD) : <0.5%, Signal-to-Noise Ratio :>97dB, Maximum Input Level :+22dBu, Crosstalk : <-70 dB. Power: AC Input Power: 100 to 240 VAC, 50 / 60 Hz; AC Power Connector: 1 x IEC; Certificate: ENERGY STAR; Accessories: AC power cable, 3.5mm Euroblock plug (6-pin) x 3, Euroblock pulg (3-pin) x 1, Owners manual, Setup guide; Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C; Ref. Make: Yamaha, QSC, Bosch, Studiomaster, Harman-JBL, Sonodyne, D&B, Meyer, Adonis Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 34 SITC of Digital Signal Processor with USB-C Interface having minimum technical specification 6ch mic/line input and 4ch analog output; 16ch YDIF digital I/O; SD Card Slot for playback; Internal processing: Priority Ducking, Ambient Noise Compensator; Sampling frequency rate: 48kHz/44.1kHz; Signal delay: Less than 2.5ms (AD-DA @48kHz); Total harmonic distortion: Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB); Frequency response: 20Hz to 20kHz, +0.5dB, -1.5dB; Crosstalk: -100dB; Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C; Rack-mountable when ensuring sufficient ventilation above and below the unit. Ref. Make: Extron, Yamaha, QSC, Bosch, Studiomaster, Harman-JBL, Sonodyne, D&B, Meyer, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 35 SITC of Wireless Handheld Microphone having minimum technical specification: Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound pressure level 154 dB SPL, Transmit power : 10 mW. Ref. Make: Bosch, Sehnheiser, Audio-Technica, Adonis, Studiomaster, Heinrich, Shure, AKG, Rode, Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. 36 SITC of Chairman Unit having minimum technical specification: Wired chairman unit with Priority button for chairman microphone; Optional chime tone facility preceding chairman announcements; Modern, unobtrusive styling; Microphone with flexible stem and light ring.Microphone ON/OFF or request-to-speak button; LED Indicator for microphone; Headphone Connectivit; Rotary volume controller for headphone volume. Ref. Make: Bosch, Sehnheiser, Audio-Technica, Adonis, Studiomaster, Heinrich Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. 37 SITC of DelegateUnit having minimum technical specification Wired delegate unit with Modern, unobtrusive styling; Microphone with flexible stem and light ring.Microphone ON/OFF or request-to-speak button; LED Indicator for microphone; Headphone Connectivit; Rotary volume controller for headphone volumeOperating temperature 5 ºC to +45 ºC; Certifications and approvals: EU: CE, WEEE; US: FCC; CA: ICES-003; KR: KCC; AU/NZ: RCM; RU/KZ/BY: EAC; CN: China RoHS; SA: SASO; Ref. Make: Bosch, Sehnheiser, Audio-Technica, Adonis, Studiomaster, Heinrich Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. 38 SITC of Controller Unit having minimum technical specification Control unit for chairman & delegate units, Controls & Powers up to 50 Discussion units; 3-Band equaliser for better sound performance; Audio interfaces for connecting external audio equipments. Built in Monitor speaker.Operating temperature 5 ºC to +45 ºC; Certifications and approvals: EU: CE, WEEE; US: FCC; CA: ICES-003; KR: KCC; AU/NZ: RCM; RU/KZ/BY: EAC; CN: China RoHS; SA: SASO; Ref. Make: Bosch, Sehnheiser, Audio-Technica, Adonis, Studiomaster, Heinrich Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. 39 SITC of Extension Cable assembly having minimum technical specification: Extension Cable assembly 10 mtrs, Ref. Make: Bosch, Sehnheiser, Audio-Technica, Adonis, Studiomaster, Heinrich Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. 40 SITC of Floor Mounted Cross Connect Equipments Audio-Video Equipments Rack, having minimum technical specification: 17/22U x 1000/800 x 800/600 Rack - Front Glass Door with Cam Lock - Fan Unit of 360CFM(Min) / 230 Volt - 4no - 6; Way 5A PDU, along with input Cable - 2no - H/w Packet of 20 - 8no - 1U PVC Cable Manager - 6no. Ref. Make: Tata, Vertiv, Legrand, Netrack, Valrack, Rittal, APW, MRS Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. 41 SITC of: Ultra Flexible Premium VGA/HDMI Cable, Data Cable, USB Cable, Power Cable, Armoured Audio-Video, Speaker Cable, XLR Connector Male-Female, Extension Cable, Control Panel, Architectural Adapter Plate, VC Box, Connectors & all interconnects, and all other passive accessories will required to complete the work, etc: *HDMI: Frame rate124, 25, 30, 50, or 60 fps; Chroma sampling14:4:4, 4:2:2, or 4:2:0; Color bit depth18 bits per colour; Signal typeHDMI 2.0; Max. video data rate 18.0 Gbps (6.0 Gbps per colour). Resolution range: Up to 4K @ 30 Hz (4096x2160) or UHD @ 30 Hz (3840x2160), 8 bit colour depth, max. 10.2 Gbps data rate. Male/Female Connector: Conductor Gauge-26AWG; Tinned Copper; Gold plated connector; Rating-UL VW-1 (Flame rate), CSA. quantity, Length (30mtr/20mtr/10mtr/5mtr/3mtr/2mtr) of VGA/HDMI Cable will be as per site requirement; * Precision-terminated Shielded Twisted Pair NEC CMP rated, Plenum Cables 75feet; * Extension Cable Assy 10M with Male Female Connector *Armoured Audio Cable for Speaker & Microphone, Connectors & all interconnects, etc, quantity as per site requirement. *Speaker Cable, etc, quantity as per site requirement: 2 core 1.2 sq mm or better PVC insulated SuperFlex jacket with sequential numbering Spools of 1,000 feet (305 m) in self-dispensing box. *PVC conduits (ISI marked) Quantity for above mentioned all items: as per site requirement. Ref. Make (Architectural Adapter Plate): Elite Electric, Akamgo, Milan, Blackdote, MX, Equivalent Logic, RGBlink. Ref. Make (Armoured Audio, Speaker): Extron, Lightware, Crestron, Canare, Belden, Sommer. Ref. Make (HDMI, VGA Cable): Extron, Lightware, Crestron, Canare, Belden, Sommer. Ref. Make (Connectors, etc): Swisscraft, Neutrik, Amphenol, Canare. Ref. Make (Power, Cable): Polycab, Finolex, Eurocable, Belden, Havells, R&M. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 42 SITC of 2 x 06 KVA Rack Mount Parallel Load Sharing Online UPS (1-ph input, 1-ph output) System with 2 x 6240 VAH (Min) Back-up Battery, Rack, Links, Cables and Other Accessories having minimum technical specification: Technology: Rack mount, Digital Signal Processing (DSP) controlled Microprocessor based technology true On-line, Parallel Load Sharing Mode (1+N) configuration enabled only; Input: 1-phase, 220/230/240V, 176 ~ 280 Vac (full load) ; 80 ~ 175 Vac (50% ~ 100% load), >0.99PF (full load), 50Hz ± 5Hz, Current Harmonic Distortion <3.0%; Output: 1-phase, 240V ± 1%, > 0.9PF (full load), 50 Hz ± 0.1Hz; Harmonic Distortion (input current): < 3% (linear load); Crest factor: 3:1; Efficiency (AC/DC) Overall is (Online Mode) >=95% at full load; Operating Temperature: 0 ~ 55°C; Relative Humidity: 5 ~ 95% (non-condensing); Battery: SMF, 12 V, Mono Block batteries. The UPS battery shall be of Advanced Glass Mat Valve Regulated Sealed Lead Acid Battery Construction type (AGM or VRSLAB) in ABS Flame Retardant (UL94V-O) grade (UL 2436) spill containment casing to meet UL 62368-1/IEC 62133 or equivalent standards type to obtain a full rated load battery backup, standard FR DC Cable; Battery set: Complete with self standing cubicle or cabinet; Certification: CE, BIS; Type Test Report: ISO 9001, ISO14001,OSHAS18001;Display: LCD display and LED indicators; Separate Battery bank and Single Battery Rack Enclosure (perforated enclosure and wheel based) with accessorised accessories. Including necessary Earthing arrangement. 2 x 06 KVA 1Ø/1Ø (Phase input/output) with 2 x 6240 VAH (Min) Battery Backup or equivalent VAH or Higher, DC BUSBAR VOLTAGE ±240/±288; 12V SMF Battery, with MS-Rack, Interlink Nyvin Cable, Connector, Special battery terminal insulation cover and other accessories. Ref. Make: Delta, Schneider, APC, Vertiv, Eaton, Hitachi, Orion, Socomac; Ref. Make Battery: Amararaja-Quanta/Exide; Warranty: 03(Three) years on UPS & 03(Three) years on Battery onsite comprehensive OEM warranty with parts and service except force majeure. 43 SITC of UPS sub DB 250V, 16 way SPN MCBDB with Sheet Steel Enclosure Double Door with IP-42/43 Protection with DP Isolator as Incomer and SPMCB (C-curve, 10Ka) as outgoing: 2+14way Enclosure (607711 or Latest), 43A/63A DP Isolator, 6 No.16A SPMCB. Make: Schneider, Legrand, Hager, SIEMENS, L&T, ABB, Havells Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 44 SITC of Single Phase UPS Power Pointto Network and AV Racks, Display, Computer, NVR, PTZ Camera, etc at different location through suitable power networking with 1.5/2.5 Sq mm 3 core FRLS PVC insulated unarmoured ISI marked copper cable as per site requrment), 6A/16A Sockets with Separate 6A/16A Switch and 6A/16A MCB mounted in 16SWG GI box with Bakelite top cover complete. Number of power point as per site requirment and as per direction engineer-in-charge. Switch, Sockets & MCB Make: Legrand, Hager, SIEMENS, L&T, Wire Make: Polycab, Mescab, Havells, Finolex Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 45 SITC of UPS Power Protection Accessories AC Power Protection (Input/Output) a) 50kA, 415V AC Four Pole SPD: 2no with 12 no cartridge refill. b) 63Amp/ 415V AC Four Pole MCB (Input and Output Isolation): 04no DC Battery Power Protection (Input) c) 100Amp/1000V DC Double Pole MCB for Battery Bank Isolation: 02no d) 20 Way Metal IP66 MCB Distribution Enclosure Box AC-DC Protection Circuit: 2no e) 5 Pin 100A 415V AC IP44/67 Industrial Plugs and Sockets PVC for 3Ph Input & Output of Inverter: 06no f) Chemical Earthing arrangement for SPDs (AC): 02no. g) Copper AC/DC Power Cables, Male & Female Connector, Length as per site requirement and others necessary accessories. Quantity may vary (increase) as per site requirement. Ref. Make (a, b, c, d,): Schneider, Legrand, Hager, SIEMENS, L&T, ABB, Havells Ref. Make (f, Wire): Polycab, Mescab, Finolex, Havells, ABB, Messcab Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 46 ADD GST 18% 47 ADD L.W.C 1%
Contract Date: Jun 03, 2025 Contract Value : ₹ 54.96 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
42.
Housing Urban and Rular Development #7425648 AOC
Procurement of Lab instruments for Quality Control lab established for 4 Nos of Quality Control Sub divisions at Salem, Dharmapuri, Thanjavur and Thiruvarur. - Supply, Delivery, Installation & commissioning of Universal Testing Machine Computerized, Capacity, 1000 kN, 6 pillar type with Hydraulic Jaws with Computer & Printer.Specification: Machine capacity: 1000 kN Machine Type:6 Pillar with Hydraulic Jaw set Load Resolution: 0.01 kN Elongation Scale Resolution: 0.1mm Extensometer Resolution: 0.001mm Max Clearance for tensile test :50 - 650mm Max Clearance for Compression test: 0 - 600mm Clearance between columns: 650mm Ram Stroke: 250mm Straining/piston speed at no load: 0 - 100mm/min. For Tension Test Clamping jaws for round specimens: 8 - 16mm, 20 - 40mm, 40 - 60mm Clamping jaws for flat specimen’s thickness: 0 - 40mm Flat specimen width: 70mm 2 For Compression Test: Pair of compression plates Dia of circular platen: 233mm For Transverse Test: Table with the adjustable rollers Width of rollers:160mm Diameter of rollers: 50m Max clearance between supports: 600mm Radius of punch tops: 16mm, 22mm. Crosshead geared motor (kW): 0.74kW Power pack motor (kW):2.2kW Weight (approx.): 3500kgAdditional Accessories: Flexural test attachment Shear test attachment 6,8,12,16 & 20 mm dia Shear test attachment 25,30,35 &40 mm dia Bend Rebend Test AttachmentComputer Specification: Intel Core i5, Processor, 8GB 3200MHzRAM 1 TB 7200 RPM HDD, Keyboard with Mouse, 24” Inch FHD IPS LED Monitor 1000VA (1KVA) Line Interactive UPS 3 Supply, Delivery, Installation and Commissioning of Ultra sonic pulsevelocity sensor kit and Rebound HammerPUNDIT LAB+ ULTRASONIC PULSE VELOCITY SENSOR KIT consisting of: display unit, 2 transducers (54kHz), 2 BNC cables 1.5 m, couplant, calibration rod, battery charger with USB-cable, 4x AA(LR6) batteries, documentation and carrying caseSILVER SCHMIDT OS8200 N consisting of: Silver Schmidt OS8200 N hammer, rechargeable AAA battery, Micro-USB cable, grinding stone, carrying strap, documentation, carrying bag. 4 Supply, Delivery, Installation and Commissioning of Profometer (PM8000) of Proceq make with Tab Apple Pro:Rebar diameter & cover meter wireless solution for spot measurements. The product consists of: Profometer PM8000 5 years software subscription (39221100), sensor (39221000), cart, 2x rechargeable NiMH battery, batteries charger, carrying strap, chalk, quick start guide and carrying case.Apple iPad Pro 4th Generation Wi-Fi (11 Inch, 128GB 11 inches (27.96 cm) Liquid Retina Display 128GB ROM Apple M2, Octa Core iPad OS 16,28.65 Wh Battery Life, 12MP + 10MP Primary Camera, 12MP Front Camera, Facial Lock, Fingerprint Resistant, Four Speaker Audio 5 Supply, Delivery, Installation and Commissioning of Digital Compression Testing Machine, Capacity 2000kN with Brick Platten 220x320 mm sizeSpecification:• Range : 2000 KN• Least Count : 0.1KN• Max Clearance between Platens : 370 mm• Max Distance Between Side Plates : 340 mm • Platen Size : 220x320 MM• Piston Dia : 222.2 mmdia • Piston Stroke : 50 mm• Used of 100mm & 150 cube & 100mmdia x 150mm high cylinder• Overload safety protection• Self-aligning platen with fast accessory change capability• Flexible Calibration Points. Calibration can be done on 5 to 10 pointsMould, Steel, for 70.6mm cubeCube Mould 70.6 mmCubemoulds are made of high quality metal and are strong enough to resist distortionand retain their shape and size under rugged conditions. These moulds are given internal surface finish of a very high order, to comply with requirements laid down inIS: 10080-1982.Spanner Set for Cube mould 6 Supply, Delivery, Installation and Commissioning of Crushing Value Apparatus with 150 mm x 250mm cube mouldsCrushing Value Apparatus Ref. Standards : IS:2386 (Part 4)The equipment consist of the following replaceable parts,• Cylindrical Cell• Plunger• Base Plate• Tamping rodMetal measureMould, Cast Iron, for 150mm Cube with ISI Certification Mark150mm Cube moulds are made of high quality metal and are strong enough to resist distortionand retain their shape and size under rugged conditions. These moulds are given internal surface finish of a very high order, to comply with requirements laid down in IS:10086-1982, 7 Supply, Delivery, Installation & commissioning of Sieve Shaker, Motorized for 20cm dia Sieve with Built-in Digital Timer with 20 cm x 30 cm seives sets, length cage, thickness cage and Bulk density measure cyclinderThe new design is compact and light weight and can be mounted on a bench top. This eliminates the use of concrete foundation. Noise has been reduced considerably in the new model. A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment.The Sieve Shaker can carry up to 8 sieves of 20cm dia. It is driven by a ¼ HP geared motor. The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.Adapter for 30cm dia sievesTest Sieves Brass Frame 20cm dia. Ref. Standard IS:460 (Part-I & Part II).Sieve Brass Frame 20cm dia x 10mmSieve Brass Frame 20cm dia x 4.75mmSieve Brass Frame 20cm dia x 2.36mmSieve Brass Frame 20cm dia x 1.18mmSieve Brass Frame 20cm dia x 600 micronsSieve Brass Frame 20cm dia x 300 micronsSieve Brass Frame 20cm dia x 150 micronsSieve Brass Frame 20cm dia x 90 micronsSieve Brass Frame 20cm dia x 75 microns 8 Pan and Cover for 20cm dia sievesTest Sieves 300 mm dia GI sheet frames Ref. Standards IS:2720 (Part 4), IS: 460 (Part I & Part II)Sieve G.I. Frame 30cm dia x 63mmSieve G.I. Frame 30cm dia x 40mmSieve G.I. Frame 30cm dia x 20mmSieve G.I. Frame 30cm dia x 10mmSieve G.I. Frame 30cm dia x 4.75mmPan and Cover for 30cm dia sievesThickness Gauge with ISI Certification Mark IS:2386 (Part I)Thickness gauge with ISI certification mark as per IS: 2386 (Part 1- amendment 2) to check flakiness index and elongation index of the aggregate respectively.Length Gauge with ISI Certification Mark IS:2386 (Part I)Length gauge with ISI certification mark as per IS: 2386 (Part 1- amendment 2) to check flakiness index and elongation index of the aggregate respectively.Density Basket 3 Liter with tamping RodDensity Basket 15 Liter with tamping Rod 9 Supply, Delivery, Installation and Commissioning of Laboratory Electric Oven size 45 x 45x 45mm weighing balance 50 kg capacityElectric Oven size 45 x 45x 45mmwith Digital Indicator Cum Controller with SafetyAlarm, range 50° to 250°C +/-1°C with Air Circulating Fan, S.S. Inside Size 450 x 450 x 450mm Electronic Balance, Capacity 50kg x 5g 10 Supply, Delivery, Installation and Commissioning of vibration machine with builtin digital timer NABL caliberated Vicat Apparatus with ISI Certification Mark, IS:5513, fitted in Aluminium Box and Le chatlier Water bath.Vicat Needle Apparatus with Dashpot For determination of consistency of standard cement paste and initial and final setting times of cement. Ref. Standards - IS:2542 (Part-2), The equipment comprises the following:1. A frame with a vertically movable rod having a cap at the top. 2. Vicat mould in the form of frustum of a cone with internal diameter of 60mm at the top, 70mm at the bottom and a height of 40mm3. Stainless Steelbase plate for the mould4. Initial setting time needle 5. Final setting time needle 6. Consistency plunger.Vibration Machine, with built-in Digital Timer, NABL CalibratedCement Mortar Vibrator Ref. Standard - IS:4031, IS:10080A specially designed Vibration Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute, as per specifications. Suitable for operation on 220V, 50Hz, Single Phase, AC supply.Le-Chatelier Water Bath with Controller size 12x9x12. 11 Supply, Delivery, Installation and Commissioning of lab accessories1) Scoop, Stainless Steel, Capacity 5kg.2) Sample Container.3) Metal Container for Oven 4) Mortar Pan bond 5) Gauging Trowel, Ref Standard IS:4031,100 to 150mm long blade with straight edge. Weight 210 + 10g 6)Ordinary mason trowel. 7) Measuring Cylinder,Glass,Graduated, Capacity 500ml 8) Measuring Cylinder, Glass, Graduated,Capacity 100ml 9)Spade with handle - Big 10)GI Bond - Small 11)Pycnometer. 12 Supply, Delivery, Installation & Commissioning of TDS Meter:Specification:Range 0-2000ppm & 0-10.00ppt, Resolution 10 ppm/0.1ppt with Temp. Display Pin Type Sensor IP RatingIP 67 13 Supply, Delivery, Installation & Commissioning of Accelerated Curing Tank for 6 moulds of 150mm sizeSpecification:• Accelerated curing Tank for 6 moulds of 150 mm size.• Size of Chamber LxBxH - 40”x22”x20”• Power (KW) - 6.0• Operating Voltage V - 440Current Rating (A) - 25.5 14 Supply, Delivery, Installation & Commissioning of Sieve Shaker motorized (Heavy Duty) with built-in Digital timer and adaptor for30cm dia sieves of AIMILmake (To be changed according to the diameter)The new design is compact and light weight and can be mounted on a bench top. This eliminates the use of concrete foundation. Noise has been reduced considerably in the new model. A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment.The Sieve Shaker can carry up to 8 sieves of 30cm dia. It is driven by a 1/2 HP geared motor. The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.Supply, Delivery, Installation & Commissioning of Aggregate Impact Testing MachineRef. Standard - IS:2386 (Part 4), IS:9377It is for determining the aggregate impact value and has been designed in accordance with IS:2386 (Part 4), IS:9377.The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 ± 5 mm. The hammer is provided with a locking arrangement 15 Supply, Delivery, Installation & Commissioning of Le-chatelier Flask Used for the determination of specific gravity of hydraulic cement as specified in IS:4031 (Part-11) : 1988. Supply, Delivery, Installation & Commissioning of Analytical weighing Balance, Capacity 250g x 0.001g.Supply, Delivery, Installation & Commissioning of Automatic Blaine’s Apparatus With In-Built Data Recording & Control System - Touch Screen Ref. Standards: IS: 1727, 4031, 4825Blaine apparatus is used to determine the fineness of cement, pozzolans, and other powdery materials as per the procedure described in IS: 1727, 4031, 4825, ASTM 6204 and BS: 4359 (Part II, Appendix A). The system is capable of monitoring the Elapsed time, Blaine Value & Ambient Temperature along with Date and Timestamp.The Automatic Blaine consists of the following main parts• Manometer tube with photo electric sensors fitted on a main Frame Blaine Apparatus.• Pumping unit for automatic control• Touch Screen to configure the parameter• Software for Automatic Blaine Test Apparatus 16 Supply, Delivery, Installation & Commissioning of Digital Screw Gauge: 25MMSpecification:• Mitutoyo Coolant Proof LCD Micrometer,• Ratchet Stop,• 0-25mm Range,• 0.001mm Graduation, • 0.001mm Accuracy,• Without SPC 17 Supply, Delivery, Installation & Commissioning of Vicat Mould Vicat Mould in the form of frustrum of a cone with internal diameter of 60mm at the top, 70mm at the bottom and a height of 40mm Stainless Steel Base Plate for the mould 18 Supply, Delivery, Installation & Commissioning ofTile Flexure Testing Machine Modulas of Rupture surface flatness and wrappage and cutting Machine.Ref. Standard - IS:654, IS:1237For clay roofing tiles (Mangalore Pattern) and Cement Concrete Flooring Tiles. This is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots which automatically stops when the sample breaks. The load is applied at the rate of 450 to 550 N/minute or 2000 N/minute as per relevant standards test requirement. The accuracy of load indication is within ± 2%. The sample is mounted between rollers 40mm diaor 12 mm dia as per relevant standards test requirement. Capacity 200 kg (2kN approx.) 19 Supply, Delivery, Installation & Commissioning of M.O.R with Cutting Machine.M.O.R. Testing Machine Electrically operated, Capacity 10kNRef. standard - 4031 (Part-8)Loading Unit : The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided.Pumping Unit :The hydraulic pumping unit is Electrically operatedThe loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.The Electrically Operated Pumping Units, load gauge is fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, to avoid any over-loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. 20 The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the load gauge reading.Rupture Test Attachment. It is designed to test specimens of 25 x 25 x 150mm for determining the modulus of rupture. The attachment consists of a bearing beam on which are kept two rollers of 25mm diameter at a centre distance of 125mm the rollers are supported on brackets and are held in position by springs. The loading roller, 25 mm diameter, is flattened on one side to sit flat on the upper platen. Suitable for operation on 220 V, 50 Hz, single phase, AC supply.Cutting Machine – 350 MMSpecification:• Bosch Corded Electric Metal Cut Off / Chop Saw, • Power Rating: 2,200W, • Rotation Speed: 3,800 rpm,• Robust Base, 355 mm Cutting disc dia.,• Weight: 15 kg (approx.)Input power Supply: 220 V AC 50Hz 21 Supply, Delivery, Installation & Commissioning of Tile- Surface Flatness, Rectangularity instrument. MEASUREMENT OF SURFACE FLATNESS AND WARPAGE:Ref. Standard: (IS:13630 (Part1)Application:1. For measurement of straightness and squareness.2. For measurement of flatness I warp-age3. Tiles size: 100 x 100mm to 800 x 800mm4. Material of Construction: Mild steel duly powder coated Following Accessories will be the part of standard apparatus:1)Digital dial Gauge:1. Make :lnsizeor EquivalentMake2. Range: 0 - 25 mm3. Accuracy:0.01 mm(10 Microns)4. Quantity: 05 Nos.2) Calibrating Plate:1. Made of Aluminum having accurate dimensions and with straight, flat sides.2.Following sizes of calibrating plates along with the Instrument will be provided.3. 450 mm x 450 mm4. 600 mm x 600 mm5. 800 mm x 800 mm 22 Supply, Delivery, Installation & Commissioning of Le-Chatelier Mould, with ISI Certification Mark IS:5514,Le-Chatelier Mould - 1No.The soundness of ordinary and rapid hardening portland cement, low heat portland cement and class-A lime can be determined by an expansion test using Le-Chateliermoulds as specified in IS:5514 23 Supply, Delivery, Installation & Commissioning offield measuring instrument Slump Cone Apparatus - 1 No.Ref Standards : IS 7320-1974The slump cone having dimension as (ID-100mm at top ID-200mm at bottom & height 300mm) is filled with freshly mixed concrete and is tamped with a tamping rod in four layers. The top of the concrete is levelled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measuredTamping Rod, Steel, 16mm dia x 600mm length with ISI Certification Mark, IS:100861) Electronic Balance, Capacity 30kg x 5g 2)Feeler Gauge 3)Right Angle 2MS 4)Sprit level. 5)Steel Tape 30m Long 6)Steel Tape 5m long 7)Plumb bob Supply, Delivery, Installation & Commissioning of Digital Vernier Caliper 150 x 0.1mm.Specification:• Digital Vernier Caliper 150mm / 6 inch Model• Material: Stainless Steel• Product Dimensions: 10L x 22W Centimeters• Number of Batteries: 1 LR44 batteries required. Supply, Delivery, Installation & Commissioning of PH Meter Pocket Type(Model PH-200):Specification: Waterproof Range 0 to 14 Ph, 3 point calibration Resolution 0.01pH SMALL Display 24 Supply, Delivery, Installation & Commissioning of traysSample Tray (Enamel Tray), Size 300x250x40mmSample Tray (Enamel Tray), Size 200x150x30mmSample Tray, GI, Size 450x450x50mm 25 Supply, Delivery, Installation & Commissioning of Digital Cum Analogue Compression Testing Machine, Capacity 250kN, Digital Cum Analogue Compression Testing Machine, Capacity 250kNElectrically Operated with ISI Mark Compression Testing Machines conform to IS: 14858(2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828(Class1).Loading Unit :The loading unit is of fully weldedconstruction having a cross head, base and solidside plates. The hydraulic jack is fixed to thebase. The platens of the machine are hardened,ground and polished. The upper platen isprovided with self-aligning action. To facilitatetesting of various size specimens, suitable sizedspacers are provided. Pumping Unit : ElectricallyoperatedPumping Unit.The loads are measured on Bourdon tube typeloadgaugeswhicharecalibratedagainstcertifiedproving rings. The load gauges are fitted with amaximumloadpointer. 26 Electrically Operated Pumping Units, load gaugeis fitted with micro switches to switch-off themotor when the load approaches the maximumcapacity of the gauge, to avoid any over-loading.Relaysareincorporatedso thatthe motordoesnot restart on its own after a power breakdown.The electrically operated pumping units areprovided with a control knob to adjust the pacerate which can be effectively controlled by anexperienced operator during the course of testing,by observing the progress of the load gaugereading.Specification:Capacity:250KNAnalogueIndicatorLeast Count: 1KNDigitalIndicatorLeasCount:0.1KNMinimum Clearance Between Platens:390mmMinimum Distance Between Side Plates: 260mmPlaten Size : 140 SquarePiston Dia : 78.7mm Piston Stroke:50MMTest Specimen Size : 50.0mm, 70.6mm &100mmCube 27 Supply, Delivery, Installation & Commissioning of Concrete Core Cutter 150MM Dia – Battery Operated with Accessories:Concrete Core Cutter 150MM:Features: • Core with confidence by delivering AC performance with a maximum core diameter capacity of 152 mm wet & dry• 2 speed gearing for a wide range of applications, with laser etched speed and capacity markings into the metal body• Speed 1: up to 75 mm diameter wet & dry coring at 1600 rpm• Speed 2: 76 to 152 mm diameter wet & dry coring 800 rpm• Patented AUTOSTOP™ clutch provides best in class protection, preventing over rotating when losing control or in case of a stuck core.• On-board level sensor guides the user to achieve a straight and accurate finish whilst horizontal drilling• On-board pressure gauge allows user to optimise drilling speed in order to get the best lifetime of machine and accessoryTechnical Specification:• No load speed (rpm) 0 - 800/ 0 – 1600• Drilling capacity in concrete 1st/ 2nd gear (mm): 76 - 152/ 25 – 76• Tool reception 1 ¼″ UNC + ½″G• Weight with battery pack (EPTA) (kg): 15.1 (MXF XC406)• Standard equipment Trigger lock-on, side handle• Kit included 1 x MXF XC406 Battery pack, MXF C Charger, Kitbox 28 Supply and Delivery of Coarse test Sieves 300 mm dia GI sheet frames Ref. Standards IS:2720 (Part 4), IS: 460 (Part I & Part II) – 1 Set = 3 Nos of following sieves1. Sieve G.I. Frame 30cm dia x 16mm 2. Sieve G.I. Frame 30cm dia x 12.5mm 3. Sieve G.I. Frame 30cm dia x 2.36mm
Contract Date: Mar 10, 2025 Contract Value : ₹ 2.75 Crore
Government Departments No of Bidders 4
Tamil Nadu View Result →
43.
Health and Family Welfare #7423823 AOC
RE E-TENDER FOR PROCUREMENT OF CONSUMABLE ITEMS FOR TWO YEARS FROM THE DATE OF AWARD OF CONTRACT (AOC)- 1 A thermal shield for a newborn infant, a double layer of PE/PUR wrapping Simple tool of pre-formed foam which acts as a barrier against heat loss for heat loss prevention or hypothermia, applicable for use in all settings where birth may take place Impaired heat production in preterm and ill newborn infants lose heat by conduction, evaporation, convection and radiation. Sizes are available according to the corpulence of the baby: Small, Medium and Large. 2 AC Lens • Material: PMMA • Optic Size: 6.00 mm • Overall Langth: 12.75 mm • A-Constant: 114.9 3 Accessories of Nerve Stimulator N.S Needles with continuous plexus and peripheral nerve blocks (compatible with approved machine) - Metalic Stylet allowing stimulation - Perineural Polyurethane Catheter 25mm, 35mm, 50mm, 100mm - 10X15 adhesive transparent dressing 4 Accessories of Nerve Stimulator(to use in o.t)Cerebral Stimulator –Nerve Stimulator – Cable Wire 5 Accessories of Nerve Stimulator(to use in o.t)Cerebral Stimulator –Nerve Stimulator – N.S Needle 6 ACCESSORIES OF USG - GEL HYPOALLERGIC 250 ML CONTAINER WITH NOZZLE 7 ACT tube for ACT management for CPB 8 Aortic Punch Precisely engineered scissor cut blade. Single use Aorta/vein punch provided clean accurate incisions for miocardial revascularization. Large finger ring for greater control and accuracy. Easyly cuts through thick calcified tissue. 9 Basic Set – Procedure pack contains essential items needed for a number of common procedures including Lumber Puncture, Spinal Anaesthesia, Epidural Anaethesia, Liver Biopsy, Paediatric Surgery, Oncology etc. (also offers custom made service) i. Tray ii. Syringe Luerslip iii. Aperture Drape iv. Galipot v. Prep Forceps vi. 4 Ball Swab (small) vii. 2 Ball Swab (large) viii. 1 Filter Needles 5 um ix. 3 Hypodermic Needles 18G, 21G & 25G x. 1 Outer Wrap 75 X 70 cm xi. Absorbent Towel 33 X 38 cm 10 Bioprosthetic Heart Valve for Mitral / Aortic Position * Triple Composite Design Valve. * Sewing ring is made of Polyester with markers for helping in sutures. * Low pressure glutaraldehyde fixation. * Flexfit stent of reduce leaflet stress. * Mitral Retchating system failitates insertion into mitral annules and avoids suture looping. * Low Profile hieght of 9 mm. * Intra & Supra Annulur implatability * No + 1 Regurgitation * Sizes Mitral : 25mm to 33mm Sizes Aortic : 19mm to 25mm 11 Blood Cardioplegia Device - Paediatric – Heat exchanger pleatal type. Priming volume of heat exchanger : <30 ml . Integrated heat exchanger with bubble trap. Assemble with Class VI Implant tested tubing. High cooling eficiency. Eassy set up and priming. Outlet comnnection 1/4 built in bridge for choice of 100 % blood and 100 % cardiopledgia solution delivery. Extra 1/4 tube and 1/4 x 1/4 luer lock connector, 2 length of tube. 12 Bone Graft Substitutes with Antibiotics 1. BONE SUBSTITUTE HYDROXYAPATITE GRANULE / BLOCKS MATERIALS. 2. ANTIBIOTICS MAY BE MIX WITH HYDROXYAPATITE SEPARATLY 13 Bridge Dressing for bridging the wound where the wound location is not suitable for dressing for VAC Unit 14 Bubble Trap (Adult) : Polycarbonate,Polyester, Filter Port - 170um, Blood port - 3/8 (9.5mm) , Vent port - female luer , Priming Volume - 150ml, Max.Blood Flow 6.5L/min. 15 Bubble Trap (Paediatric) : Polycarbonate,Polyester, Filter Port - 170um, Blood port - 1/4 (6.4mm) , Vent port - female luer , Priming Volume - 50ml, Max.Blood Flow 1.6L/min. 16 CDC Guided Peripheral IV Securement Device with component: 1 No 2% Chlorohexidine Gluconate & 70% Isopropyl Alcohol wipe as per CDC recommendations, 1 No Sterile Gauze piece,1 No Latex Free Synthetic Poly-isoprene Based texture Surface Material Of Tourniquet,1 No Transparent Semi Permeable polyurethane film with Reinforcement of Waterproof Soft cloth and Pattern Coated Adhesive for Higher Sweat Transfer Rates Dressing. Size - 7 cm X 8.5 cm - 9 cm. 17 Cuff Manometer (Cuff Inflator Pressure Gauge): 1. Allows controlled initial cuff inflation. 2. Intermittend pressure monitoring facility. 3. Instant visual confirmation of intra-cuff pressure. 4. Simple operation of pressure adjustment without need for disconnection or introduction of syringe into system. 5. Solid green zone indicates ususal cuff pressure range for tracheal & tracheostomy tubes. 6. Connecting tube is supplied with the gauge for convenient positioning. 7. Portable gauge and clips easily into pock. 18 Custom Pack for Membrane Oxygenator (Neonatal) - Class VI implanted tubing. Non-kinking transparent clear tubing. Should be Clear and Colour strip. Component include Gas line filter. Pre by pass filter. 19 Custom Pack for Membrane Oxygenator (Paediatric) - Class VI implanted tubing. Non-kinking transparent clear tubing. Should be Clear and Colour strip. Component include Gas line filter. Pre by pass filter. 20 CVC 9.5 Fr., Silver Ion Impregnated Thermosensitive Polyurethane Penta Lumen Adult CVC with Anti Kinking Nitinol Guide Wire. Size - 14 G / 16 G/ 18 G/ 18 G/ 18 G 21 CVC Catheter Fixation Device - (Epidural, CVC, Arterial) * Infection Free Painless Suture Less Catheter Fixation Device. 22 CVC Pediatric set Oximetry Catheter of size - 5.5 Fr. Having optical cable to monitor SCVO2 with CCO Monitor for Neonatal and Pediatric Patients. 23 Dark Goggles (Adult size) with side covering 24 Dark Goggles (Paediatric size) with side covering 25 Diathermy Pad Foam and woven backing material Bipolar model. Upright and horizontal shape. The patent shape outline design make the adhearence to be more close and comfortable on body joint anf lift bones. The conductive gel covers over the edge of metal foil. It can avoid the burned hurt which because by the connection of metal foil and skin. 26 Disposable Fluid warmer Tubing, * Blood and IV Fluid warmer set with Injection port. 27 Disposable Neonatal Blood Exchange Set with Accessories 28 DISPOSABLE SUCTION POD STABILISATION SYSTEM FOR CABG, THE POD SHOULD ROTATE 3600 29 Ear Speculas Specification : a. Troeltschs ear specula, adult size, set of 3. b. Troeltschs ear specula, infant size, set of 3. 30 Epidural anaesthesia kit containing 18G/16G Touhy needle (80-100 mm length, graduated at 10 mm intervals, snap lock wing), LOR syringe-10 ml, Epidural catheter-clear nylon/ polyurethane/ polyamide material, closed round soft tip with multiple lateral eyes within 4 mm of tip, length 90-100 cm, Radiopaque line, size as per needle gauze (Latex, PVC & DEHP free), Threading Assist Guide provided to fit securely into the needle & assist easy advancement of catheter, luer lock connector, Easy fixation device with 0.2-micron filter. 31 Epidural anaesthesia kit containing 18G/16G Touhy needle (80-100 mm length, graduated at 10 mm intervals, snap lock wing), LOR syringe-10 ml, Epidural catheter-clear nylon/ polyurethane/ polyamide material, closed round soft tip with multiple lateral eyes within 4 mm of tip, length 90-100 cm, Radiopaque line, size as per needle gauze (Latex, PVC & DEHP free), Threading Assist Guide provided to fit securely into the needle & assist easy advancement of catheter, luer lock connector, Easy fixation device with 0.2-micron filter. 32 ET tube holder with bite blocker 33 Eye Pad With Out Adhesive. • Gauze or nonwoven covered outside, cotton inside. • Size: Standard size in Oval Shape to cover the eye. • Individual pack in sterile packaging, ETO (EO) Sterile Eye Pad. • Without Adhesive. 34 Femoral Arterial - 15F to 22F (Straight) 35 Femoral Venous - 17F, 19F, 21F & 23F 36 Foldable Lens (Phaco) • Single piece Foldable Lens • Material is UV Block incorporated ensuring adequate UV protection • Optics are YAG Laser friendly • Non-lonic nature of materials ensures resistance to deposits thus lowering the incidence of PCO • Material: Acrylic Hydrophilic • Optic Type: Biconvex • A-Constant: 118.0 • Optic Size: 6.0 mm • Overall Langth: 12.5 mm 37 Foldable Lens (Phaco) of different IOL powers: + 1 D to + 25 D • Single piece Foldable Lens • Material is UV Block incorporated ensuring adequate UV protection • Optics are YAG Laser friendly • Non-lonic nature of materials ensures resistance to deposits thus lowering the incidence of PCO • Material: Acrylic Hydrophobic • Optic Type: Biconvex • A-Constant: 118.0 / 118.5 • Optic Size: 5.5 mm / 6.0 mm • Overall Langth: 12.5 mm 38 Head Lights Specification : a. Combination of xenon bulb and LED bulbs. b. 18 lumens, xenon: 7.5 lumens, LED. c. 90 degree tilting head. d. Water resistant. e. Push button switch. f. Unbreakable poly carbonate lens. g. Weights less than 5 Oz with batteries. h. Runs on alkaline batteries. 39 INSTRUMENT TRAY E. I. 30 C. M. X 25 C. M. WITH COVER STAINLESS STEEL IS 3257, IS 3424 40 Intra abdominal pressure monitoring kit 1. Intra abdominal pressure monitoring kit with transducer compatible 2. with present interface cable or without transducer with sleeved syringe. 41 Intubating stylate – small, malleable, aluminium tubating stylets. Each stylet is enclosed in a PVC sheath having blunt ends to reduce the risk of trauma . 42 Intubating stylet – large, malleable, aluminium tubating stylets. Each stylet is enclosed in a PVC sheath having blunt ends to reduce the risk of trauma . 43 Intubating stylet – medium, malleable, aluminium tubating stylets. Each stylet is enclosed in a PVC sheath having blunt ends to reduce the risk of trauma . 44 Jobson Horne Probes Specification : a. Double ended – Serrated tip & smooth ring, length 140 mm. b. Made up of good quality rust free stainless steel materials. 45 Measuring Tape (MUAC) 46 Measuring Tape (WC) 47 Mono leaflet Mechanical Prosthetic Mitral / Aortic Valve with elevated pivot guards • Mono leaflet Rotatable or Tilting disc Rotatable • Swing Ring Hence-25 alloy • Disc made of UHMPE • Swing Ring made of Polyester 48 Mouth Gag 49 Moving Front Chemical Indicators To Verify All Parameters Of Steam Sterilisation To Gather i.e. Time, Temperature & Equality Of Steam Read Out Indications After Accept Or Reject Process & Allows To Differentiate All The Parameters 50 MOX (Connector) with pressure gauge 51 MOX-26 OXYGEN PRESSURE REDUCING VALVE 52 Multiple Clip Applicator - Should be 20 titanium clips of different sizes with precise angled jaws. Anti drop rachet. Latteral Transverse inner grooves. 53 NEONATAL/INFANT RESUSCITATOR SET COMPLETE IN A CARRYING CASE (FOR LABOUR ROOM, MOBILE VANS AND PAEDIATRIC WARDS & O.T.S) 1. Silicone Manual Resuscitators Autoclavable Reusable, Non- Rcbreathing valve, 360 degree swiveling patient connector, Autoclavable Oxygen Reservoir. 1.5 mtr. Oxygen tubing. 2. Should have two silicone manual resuscitator for Neonate of 200ml. to 250m1. and for Infant of 550 ml to 650ml with size of 0, l, 2 & 3 face masks. Silicone manual resuscitator. 3.Should be supplied with carrying cum storage bag 54 Non-invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ¼” X 3”/6 mm X 75 mm 55 Non-invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ¼” X 1½”/6 mm X 38 mm 56 Non-invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ¼” X 4”/6 mm X 100 mm 57 Non-invasive Skin Closure Strips With Sterile Breathable Non- Oven Rayon Backed Miroporous Material With Filaments For High Tensile Strength, Containing Hypoallergenic Adhesive To Reduce Skin Trauma & Scars Chances Of Infection Leading To Optimum Cosmetic Outcomes. Size - ½” X 4”/12 mm X100 mm 58 O2 Recovery Kit for tracostomy with separet valves and star lumen crush technology o2 tube 59 Otoscope Specification : a. All Plastic Moulded Head. b. 2.5v Halogen Bulb. c. Acrylic viewing window built into instrument. d. Swiveling viewing window built into instrument. e. Four (4) Reusable Specula of the diferent sizes. 60 Oximetry CVC Catheter 16/20 CM for ScvO2 Monitoring (Disposable single Use) 61 OXYGEN CYLINDER - FINE ADJUSTMENT VALVE ONLY 62 OXYGEN CYLINDER FLOW METER (FINE ADJUSTMENT VALVE AND GAUGE) 63 OXYGEN CYLINDER KEY FOR VALVE BULL NOSE TYPE 64 P. V. C TUBING 3/4 X 10 MTR STERILE 65 PACING WIRE SUTURE (Atrium / Ventricle) 66 Paediatric Cuff endotrachealTube, Size - 2.5, 3, 3.5,4, 4.5, 5.1. Internal and external diamiter should be mentioned.2. Material shoul be latex free PVC medical grade.3. Low Pressure high volume cuff.4. Printed pilot balloon.5. Smooth Murphy eye.6. Radio opaque line.7. Vocal cord guide mark.8. Misting can be clearly seen. 67 Pain relief detachable silicon implantable catheter 6.6Fr with Antikinking Sleeve sitimplant titanium device with Peel away desilet, compatible with MRI frequency-height (8mm-11mm) & weight (3.5g-10.5g) with tunnellisation needle and Teflon coating Nitinol Guide wire, Bloodless access & vein lifting device. 68 PC IOL (RIGID) • Material: PMMA • Optic Size: 6.0 mm • Overall Langth: 12.5 mm • Power: +2.00 to 35.000 (0.50 Steps) • A-Constant: 118.2 • Optical Clarity to ensure high contrast sensitivity. 69 Pediatric Shunt, Size - 3, 3.5, 4 & 5 mm, * Shunt should be made by PTFE. * Shunt length should be 10cm,* Shunt should be used in Cardiac Procedures. 70 Pediatrics Endotoxin (96 hours ) Filter with Triple Layer extension tube with Clamp, for Air Eliminating 0.22um, Priming volume: 0.8ml Flow rate : 7 ml/min. 71 Percutaneous Dilation Tracheostomy 7, 8, 9 mm 1. Should have scalpel with number 15 blade 2. Should have an introducer needle 3. Should have a 10ml syringe for aspiration 4. Should have 14Fr pre-dilator 5. Should have extra long guide wire 6. Should have a well marked extra length guiding catheter 7. Should have a hydrophilic graduated single stage dilator 8. Should have a cuffed sub-glottic tracheostomy tube 9. Should have a tracheostomy tube obturator 10. Should have a flexible inner cannula 11. Should have swabs for cleaning 12. Should have a tracheostomy tube holder 13. Should have FDA/CE approval 72 PIN INDEX VALVE FOR O2 AND N2O FOR ANAESTHETIC APPARATUS 73 Porcine Bioprosthetic Heart Valve • Both Aortic / Mitral Position. • Aortic Position – Sizes 19 to 29mm, • Mitral Position – sizes 25 to 33 mm.• It should have anticalcification treatment. • Profile height 9 mm-11 mm radioopaque marker for future valve in valve. 74 Positive Airway Pressure System : 1. 22mm OD patient end to accommodate mounthpiece. 2. Scalloped ambient air inlet with gaps to resist occlusion. 3. Pressure port with white sealing cap, to allow connection to a gauge for easy monitoring. 4. Gas inlet port to allow connection to O2 source with a flow meter. 5. Can be used in conjunction with aerosol medication (e.g nebulizer) via 22mm connection. 6. Available with a disposable manometer. 7. Transparent design for visual monitoring of contaminants. 75 Prosthetic Knitted Dacron Bifurcated Graft, Size: D - 14 x 7 mm, 16 x 8mm, 12 x 6mm, 18 x 9mm, 20 x 10mm L- 45cm, * Gelatin impregnated. 76 Prosthetic Knitted Dacron Graft, Size : D - 8 to 14 mm L - 60 cm, * Gelatin impregnated. 77 Prosthetic Knitted Dacron Graft, Size: D - 16 to 32 mm L - 20/25/30cm, * Gelatin impregnated. 78 PTFE (Compressed) Felt Pledgets Size - 9.5 x 4.8 mm * Thickness should be 1.65 mm, * Pledgets should be buttreness under suture of tearing through tissue. 79 PTFE membrance patch for reconstraction in congenital cardiac surgery 80 PTFE vascular graft of different sizes (5mm to 8mm) - Plain 81 PTFE vascular graft of different sizes (6mm to 8mm) – Ring Reinforce 82 Radial or Femoral Arterial Sensor /Finger Cuff (Disposable single Use) 83 Rechargeable Surgical Clipper With Fixed Head & Cutting Disposable Blade Run Time Of 160 Minutes, Rechargeable With Lithium Ion(Li-Ion) Battery With Drop In Charger With Or Without A Cord & Single Used 36.4mm Width Blade Snap On & Pop Off Easily 84 RETRACTOR, ABDOMINAL DOYENS SIZE 8 CM. 85 Reusable Arm for Vaccum Stabilization & Positioning system: - 360° articulation maximizes vessel access and stabilization. Universal swivel mounts on retractor to provide procedural versatility. Dynamic tissue adherence ensures superior stabilization on the beating heart. Advance vaccum stabilization & positioning minimizes tissue trauma. 86 Reusable Introducer : 1. Reusable Introducer to have a coude/angled tip to easily identify tracheal rings in difficult intubatiions. 2. Clear gratuaded markings to indicate intubation depth. 3. Size : 15CH, 60 cm 4. Should be Latex free. 87 REUSEABLE LARYNGEAL MASK AIRWAY, SIZES - 1, 1.5, 2, 2.5, 3 & 4 1. It should be anatomically curved/straight 2. It should be made of Silicon/PVc 3. It should be 100% sterilizeable 4. It should have colour coded pilot balloon to identify mask size 5. It should have depth marks for monitoring correct position 88 REUSEABLE PROSEAL LARYNGEAL MASK AIRWAY, SIZES - 2, 3 & 4 89 SF IOL • Material: Acrylic • Single / Multi piece • Optic Design: Equiconvex • Optic Size: 6.50 mm • Overall Length: 13.50 mm • Haptic Angle: Modified C • Dialling Holes: 2 Eyelets • A-Constant: 118.2 90 Silicon Aircufe Tracheostomy Tube - Size - 6mm/7mm/8mm 91 Silicone Cuffed Tracheostomy tube for Paediatric. Size - 2.5 mm / 3 mm / 3.5 mm / 4 mm / 4.5 mm / 5 mm / 5.5 mm 92 Single Ball Spirometer, single ball spiro with lower inspiration capicity from 200 cc - 1200 cc 93 Single Use Bougie 94 STERILIZING DRUMS, FOR USE IN STERILIZERS AND FOR STRONG STERILIZED DRESSINGS. IMPROVED PATTERN. MADE OF EXTRA HEAVY STEEL WITH DOME SHAPED TOP AND BOTTOM AND CHROME PLATED. ABSOLUTELY DUST PROOF. HASPS LOCK THE JACKET TIGHTLY IN ORDER 235 IN. DIAM. X 120.65 MM. HEIGHT [STERILIZER, SHALLOW (DRESSING DRUM)],IS3831 95 STERILIZING DRUMS, FOR USE IN STERILIZERS AND FOR STRONG STERILIZED DRESSINGS. IMPROVED PATTERN. MADE OF EXTRA HEAVY STEEL WITH DOME SHAPED TOP AND BOTTOM AND CHROME PLATED. ABSOLUTELY DUST PROOF. HASPS LOCK THE JACKET TIGHTLY IN ORDER 235 IN. DIAM. X 241 MM. HEIGHT [STERILIZER, SHALLOW (DRESSING DRUM)],IS3831 96 STERILIZING DRUMS, FOR USE IN STERILIZERS AND FOR STRONG STERILIZED DRESSINGS. IMPROVED PATTERN. MADE OF EXTRA HEAVY STEEL WITH DOME SHAPED TOP AND BOTTOM AND CHROME PLATED. ABSOLUTELY DUST PROOF. HASPS LOCK THE JACKET TIGHTLY IN ORDER 285.75 IN. DIAM. X 241 MM. HEIGHT [STERILIZER, SHALLOW (DRESSING DRUM)],IS3831 97 STERILIZING DRUMS, FOR USE IN STERILIZERS AND FOR STRONG STERILIZED DRESSINGS. IMPROVED PATTERN. MADE OF EXTRA HEAVY STEEL WITH DOME SHAPED TOP AND BOTTOM AND CHROME PLATED. ABSOLUTELY DUST PROOF. HASPS LOCK THE JACKET TIGHTLY IN ORDER 336.55 IN. DIAM. X 241 MM. HEIGHT,IS3831 98 STERILIZING DRUMS, FOR USE IN STERILIZERS AND FOR STRONG STERILIZED DRESSINGS. IMPROVED PATTERN. MADE OF EXTRA HEAVY STEEL WITH DOME SHAPED TOP AND BOTTOM AND CHROME PLATED. ABSOLUTELY DUST PROOF. HASPS LOCK THE JACKET TIGHTLY IN ORDER 381 IN. DIAM. X 279.4 MM. HEIGHT,IS3831 99 SUTURE MATERIAL, STERILISED CHROMIC CATGUT NO SIZE - 3 LENGTH MIN 152 CMS 100 Swivel Connector having 360 degree rotating connector for ET Tube 101 Synthetic fiberglass cast material - 4 102 Synthetic fiberglass cast material - 5 103 Tracheal Access device with Suction port. Size: 6, 6.5, 7, 7.5, 8, 8.5, 9 mm. 1. It should have a Low pressure-High volume / low pressure-low Volume Reverse cuff, whose inverted profile allows pooling and easy removal of secretion from the above the cuff while leaving the tube in-situ. 2. Low pressure high volume smooth tapered soft seal cuff made from velvet soft PVC material, for minimal risk of trauma. 104 Tracheostomy tube with suction port Sizes 6, 7, 7.5, 8, 8.5, 9, 10 mm. 1. Made of thermo-sensitive clear PVC that softens at body temperature to conform to patient anatomy. 2. Integral suction lumen allows removal of pooled secretions. 3. Clear suction line for removal of pooled secretions. 4. Profile Low Pressure-High Volume Soft Seal® with reduced bulk and smooth transition to tracheostomy tube to improve ease of insertion. 5. 15 mm connector located on the tube, not the inner cannula. 9. Smooth inner cannula (available separately). 10. Available in sizes ranging from Single-use. 11. Should have FDA/CE approval 105 Tricuspid Rigid Annuloplasty Ring - Assorted Sizes Rigid ring for durable repair Complete or Open Ring conforms s to Tricupsid annulus Marking for anatomic orientation, US-FDA / CE Approved. 106 Twin Flow Polyurathane Radiopaque Peripherally Inserted Central catheter with Neocath Split Introducer for Premature Babies & Neonates Medication & Nutrition. 107 Umbilical Artery & Venous catheter in fully radio-opaque polyurethane with a distal eye and lateral eye, rounded distal tip Actual distance from the distal tip is printed numerically from 4 to 20cm Proximal extension tubes(PUR) Length:5cm, with clamp Reduce the number of peripheral routes required subsequently Size: 2.5 Fr, 3.5 Fr, 4 Fr, 5 Fr, 8 Fr & Length: 30 - 40 cm. 108 Umbilical Tape Sterile prepackaged hypoallergenic nonwoven material 109 Uncuffed Fenestrated Tracheostomy Tube Kit . It should have multiple fenestrations . The Kit should also contain 2 inner cannulas (1 fenstrated &1 non fenestrated), cleaning brush, Strap and decannulation cap. 110 Uncuffed fenestrated Tracheostomy Tube Kit : 1. Should have uncuffed tracheostomy tube kit. 2. Should have 2 fenestrated inner cannulae that has a pull ring that aids which aids in smooth insertion and removal from tube, minimizing patient trauma. 3. Should have a cleaning brush to clean the tracheostomy tube and inner cannula. 4. Should have a tracheostomy tube holder. 111 Vascular loop, silicon, length 15-20 cm, assorted size 112 VIDEO LARYNGOSCOPE WITH DISPOSABLE BLADES, SIZE -1, 2, 3, 4. 1. Monitor size should be at least 2 2. It should be supplied with Channeled and Non-Channeled blade 3. Blade size should be 1,2 & 3 cm. or 2,3 &4 cm. (any three size) 113 Weighing Machine FOR Baby 114 Weighing Machine for Blood donors 115 Adhesive Elastic Bandage (10cm X 4 mtr.) 116 Advance vaccum stabilization: Stabilizer with ball attachment , suction 360 degree articulation maximizes vessel access and stabilization , Malleable footprint. 117 Angioplasty, Peripheral stent of different size- 4,4.5,5.• Catheter length 135cm.•Stent length should be 20,30,40,60,80,& 100 118 Bain Circuit : Jackson Rees modifications of Ayres T-Piece system with 15 & 10 ML corrugated tube with a 500 ML antistatic rebreathing Bag and a bag bleed valve. 119 Bulldog Clamp (Micro), Curved 3.5 cm lengths, Single use bulldog clamps are a lightweight radiopaque plastic construction. Colour coded according to clamp size and pressure. Atraumatic Jaw designs. Parallel clamp designed for maximum occlusion and atraumatic pressure. Latex-safe. 120 Bulldog Clamp (Micro), Curved 4 cm lengths, Single use bulldog clamps are a lightweight radiopaque plastic construction. Colour coded according to clamp size and pressure. Atraumatic Jaw designs. Parallel clamp designed for maximum occlusion and atraumatic pressure. Latex-safe. 121 Bulldog Clamp (Micro), straight 3.5 cm lengths, Single use bulldog clamps are a lightweight radiopaque plastic construction. Colour coded according to clamp size and pressure. Atraumatic Jaw designs. Parallel clamp designed for maximum occlusion and atraumatic pressure. Latex-safe. 122 Bulldog Clamp (Micro), straight 4 cm lengths, Single use bulldog clamps are a lightweight radiopaque plastic construction. Colour coded according to clamp size and pressure. Atraumatic Jaw designs. Parallel clamp designed for maximum occlusion and atraumatic pressure. Latex-safe. 123 CANNULA, AORTIC ARCH CANNULA WITH METAL LEGS, 124 CANNULA, DISPOSABLE THORACIC DRAINAGE WITH TROCAR 125 CATHETER, AORTIC BALLOON VALVOPLASTY CATHETER 126 CATHETER, PULMONARY BALLOON ANGIOPLASTY CATHETER 127 Central Venous Catheter : 24G Radiopaque polyurethane peripherally inserted central venous catheter for premature neonates weighing <1KG 128 Central Venous Catheter : 28G Radiopaque polyurethane peripherally inserted central venous catheter for premature neonates weighing <1KG 129 Circular Stapler for End to End Anastomosis With different staple height. Size : 24/25/28/29/31/33/34 mm various type of tissue thickness starting from 1.00 mm to 2.5mm. Open staple leg length should be approx 3.0 to 5.5 mm. Non slip gripping surface. Assorted Sizes.should have 2 rows/3 rows 130 CLIPS, TOWEL HOLDING, CROSS ACTION IS 4066:1967 131 Convective Warmer System, N.B.:*Should deliver warm air uniformly to the patient through disposable plastic blankets.* Should have 4 set temperatures: Ambient, 36 OC, 40 OC, 44 OC.* Should have hose end temperature control system.*Hose must have four rectangular openings at the end to allow air flow in case blanket is causing occlusion. * Should have short warm up time.*Should be quiet and light weight.*Can be mounted to the infusion pole or bed rails or placed on the floor.*Should display actual temperature of air being delivered to the patient.* Must meet all convective warming standards.*Should have safety alarms such as over temperature, under temperature and hose disconnect. 132 Endoscopic Universal Cutter cum Stapler, Size : 30 mm Powered Endocutter with dual safety system that includes a manual over ride system, can accomodate all sizes of cartridges. Articulating , Shaft length -4.4 to 6 cm Firing stroke indicator and must have interchangable 6 rows of staple. 133 Expandable Biliary Metal Stent - Special design for low migration. Non-traumatic ends of the stent. Highly flexible delivery system with 180cm working length. Lower shortening, Markers at the middle and both ends. Stent dia : 10 mm, Stent Length : 60mm,80mm,100mm, Delivery system dia : 7F/8F (uncovered ) 134 Flow Fluid Warmer system , * Delivers blood and intravenous fluid to the patient atnormothermic temperature at wide range of flow rates from gravity flow rates to 50-5,000 ml/hr.*Keeps blood and fluids warm between 37–42°C. *Dedicated disposable triple lumen tubing that eliminates patient line cool down of infusate. *Single step programming of warmer. *Easy to setup and easy to use.* Displays set point of recirculating reservoir. *Audible and visual alarms if reservoir temperature reaches 43.9 OC. * Meets all AABB standards for blood warming. *Disposables must be latex free . *Should have built in safety audio and visual alarms for Check disposables, Add recirculating solution and Over Temperature.* Built in over temperature test button and alarm test button 135 Forceps, Sponge Holding, S.J. Curved, 23.5 cm 136 Forceps, Tissue, Judd-Allis, 19cm IS 7388 137 Intra-Aortic Balloon Catheter, *Catheter Size should be- 7.5Fr. * Balloon Sizes should be -34cc & 40cc. * Should be Balloon Length 221mm to 258mm. * Catheter Shaft should be Design : Co-Lumen. * Catheter Length of Proximal marker 6mm (Approx). * Outside Balloon coating should be –Silicone. * Guide wire Construction –SS with PTFE. * Guide Wire Size -0.025” * Balloons catheter should be FDA & CE Certified. 138 LANCET Disposable, Sterile, Individually wrapped, stainless steel, Provides quick, clean puncture, Straight side easily spreads blood on glass slide, Precision engineering, accuracy within 1/100mm in thickness, permanently sealed, Designed for one time use 139 PULSE OXYMETER WITH ACCESSORIES 140 PULSE OXYMETER WITH CAPNOMETER 141 SCISSORS, C.O.F., ROUND POINTS S.J.S.S. 12.5 CM 142 SCISSORS, C.O.F., ROUND POINTS S.J.S.S. 15 CM 143 SCISSORS, C.O.F., ROUND POINTS S.J.S.S. 20 CM 144 SCISSORS, C.O.F., ROUND POINTS S.J.S.S. 22 CM 145 STERILISER, HIGH PRESSURE DRESSING STERILIZER, HORIZONTAL VACUUM MODEL, TO STERILIZE DRESSINGS ETC. AT 1.4 KG. PRESSURE (1270 C) 250 MM. OR MORE VACUUM OBTAINED, STERILIZING CHAMBER MADE OF HEAVY GAUGE STEEL TINNED INSIDE DOOR AND FLANGES, ETC., MADE OF GUNMETAL / MILD STEEL / SS316. STRONG STEEL BOILER FOR GENERATING STEAM, BUILT BELOW STERILIZER, MOUNTED ON ALUMINIUM ENAMELED TUBULAR STEEL STAND, STERILIZER FITTED WITH PROTECTED WATER GAUGE, SAFETY VALVE, PRESSURE GAUGE, VACUUM GAUGE, STEM EJECTOR FOR PRODUCING VACUUM, ETC., AND WITH ALL NECESSARY INLET AND OUTLET COCKS WITH INSULATED HANDLES. DOOR, COCKS, VALVES AND OTHER FITTINGS, NICKEL PLATED. HAS ARRANGEMENT FOR SUBMITTING, THE DRESSINGS, ETC., TO A VACUUM BOTH BEFORE AND AFTER STERILIZATION. INTERNAL DIMENSIONS 900 MM. DEEP X 400 MM. DIA. (WITHOUT DRESSING DRUMS). IS 3829 Part 1 N.B.:THERE SHOULD BE A PLATE ON THE BODY OF THE STERILIZER IN WHICH THE MANUFACTURER SHOULD CERTIFY THAT “TESTED UNDER HYDRAULIC PRESSURE UPTO 2.45 KG.” IS 3829 Part 1 146 STERILIZER, HIGH PRESSURE DRESSING STERILIZERS HIGH PRESSURE DRESSING STERILIZER, UP-RIGHT MODEL, TO STERILIZE DRESSING ETC., AT 1.05 KG. PRESSURE (1210 C) WITH GUN-METAL FITTINGS. CONTAINER MADE OF HEAVY STEEL, TINNED INSIDE, COVER ON STRONG HINGE. COVER CLOSED BY SCREWS. FITTED WITH PROTECTED WATER GAUGE, SAFETY VALVE, PRESSURE GAUGE, ETC. AND WITH ALL NECESSARY INLET AND OUTLET COCKS WITH INSULATED HANDLES. COCKS VALVES AND OTHER FITTINGS NICKEL PLATED. INTERNAL DIMENSIONS 500 X 300 MM. DEEP DIA. (WITHOUT DRESSING DRUMS). ADDITIONAL TEMPERATE GAUGE SHOULD BE PROVIDED. N.B.- THERE SHOULD BE A PLATE ON THE BODY OF THE STERILIZER IN WHICH THE MANUFACTURER SHOULD CERTIFY THAT “TESTED UNDER HYDRAULIC PRESSURE UPTO 2-10 KG.” IS 3829 : Part 3 147 Syringe, Disposable hypodermic syringe 20ml 148 THERMOSENSETIVE POLYURETHANE ANTIMICROBIAL PAEDIATRIC TRIPLE LUMEN CENTRAL VENOUS CATHETER IMPREGNATED WITH RIFAMICIN & MICONAZOLE WITH NITINOL GUIDE WIRE -4.5FR- 6CM/12.5CM-20G/23G
Contract Date: Jun 02, 2025 Contract Value : ₹ 1
Government Departments No of Bidders 74
West Bengal View Result →
44.
Health and Family Welfare #7349573 AOC
E-Tender For Procurement Of Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Accessories Of Nerve Stimulator (To Use In O.T) Cerebral Stimulator –Nerve Stimulator – Alkaline Battery. , Antimicrobial Double-Lumen Polyurethane Catheter For Haemodialysis Fully Radiopaque Catheter Introduced By The Seldinger Technique. Flexible Fixation Wings And Polyurethane Extension Tubes With Clamp. Centimetre Graduations From 9Cm From Distal Tip. The Active Ingredient Used In The Expert Technology Is The Silver Ion-Based Antimictobial Agent Agion Which Is Incorporated Into The Polyurethane Tubing Of The Catheter. , Arterial Filter (Pediatric): Polycarbonate , Polyester Screen Type, Filterpore Size 32Um , Vent Port - Female Luer Port , Priming Volume - 40Ml,Max.Blood Flow Rate 2.5L Per Min. , Arterial Lines : Polyethylene Arterial Lines (Single Lumen 20G - Length-10Cm/8Cm/6Cm/4Cm) With Seldinger Technique , Bileaflet Mechanical Prosthetic Aortic Valve With Elevated Pivot Guards * Bileaflet & Rotatable* Opening Angle Of 850 And Traveling Arc Of 560.* Disc Made Of Pyroletic Carbon / Graphite Substrate.* Sewing Ring: Made Of Polyester With Markers For Helping In Suturing.* Vertical Leaflet Exposure = 3.4 Mm For Better Ostia Clearance* Posterior Wall Clearance= 6.6 Mm In Both Anotomical And Anti- Anotomical Positions. * Aortic Assorted Sizes. , Bileaflet Mechanical Prosthetic Mitral Valve With Elevated Pivot Guards * Bileaflet & Rotatable* Opening Angle Of 850 And Traveling Arc Of 560.* Disc Made Of Pyroletic Carbon / Graphite Substrate.* Sewing Ring: Made Of Polyester With Markers For Helping In Suturing.* Vertical Leaflet Exposure = 3.4 Mm For Better Ostia Clearance* Posterior Wall Clearance= 6.6 Mm In Both Anotomical And Anti- Anotomical Positions. * Mitral Assorted Sizes. , Blood Gas Analyser/Bed Side Blood Gas-Analyser/Acid Base Lab Specification:- Portable Clinical Analyser With Recorder, Printer And Different Cartiledge For Estimating Blood Gas, Electrolyte3s, Haematocrit, Hemoglobin, Blood Glucose Etc , Blood Tubing And Avf Needles , Boving Tissue Engineered Acellular Pericardial Patch , Box For 25 Glass Slides (Plastic Made) , Cannula, Femoral Venous Cannula : Kink Resistance Thin Wall, Radio Opaque Bodies With Multiple Side Holes. Depth Markings Permit Precise Positioning Of The Cannula With A Tapered Tip Dilator Which Facilitates Insertion Over 0.038 In. ( 0.1 Cm ) Guide Wire. Size : Assorted, 21 In. (53.3 Cm) Overall Length 25.5 In. (64.8 Cm) Over All Length. , Cannula, Single Stage Venous Cannula, Malleable, Wire Reinforced Adult With Multiport And Different Types Of Tips , Catheter, Balloon Coronary Angioplasty Catheter Post-Dilation Distal Tip - Small Entry Profile < 0.44Mm And Small Balloon Profile Of < 0.035 Triple Layer Balloon With Large Pressure Working Range From 12Atm (Np) To 22Atm (Rbp). Hydrophilic Coating Of Shaft. Size: Balloon Length Starts From 6Mm Diameter From 2.00 Mm To 5 Mm And Above , Catheter, Balloon Coronary Angioplasty Catheter Pre-Dilation Tip-Small Entry Profile < 0.42Mm. Shaft Proximal 1.9 Fr & Distal 2.6 Fr. Hydrophilic Coating Of Core Wire Shaft. Rbp Upto 14 Atm. Size: 1.00 Mm To 4 Mm Diameter. , Closed Intra -Venous And Intra-Arterial Blood Sampling System, Along With Two Pressure Transducer With Flush Device & Vent Stopcock, Iv Set ,2 Shutoff Valve, 87” Patient Pressure Tubing Along With Inbuilt Inline 12 Cc Reservoir & 2 Self-Sealing Z-Site For Closed Blood Sampling Port, Pole Mountable , Coronary Angioplasty Guide (Ptca) Wire Subcategories: Floppy /Extra-Floppy/Intermediate/Hydrophilic. , Coronary Angioplasty Guide Wire (Micro Wire With Catheter) , Corrugated Rubber Sheath Drain , Cvc 4 Fr. With Anti Kinking Nitnol Guide Wire(Paediatric)- 20G/23G/23G , 6Cm/8Cm/10Cm * 4.5Fr. Thermosensitive Polyurethane Triple Lumen Paediatric Cvc. * It Has Anti Kinking Nitnol Guide Wire , Cvc 5.5 Fr. With Anti Kinking Nitnol Guide Wire(Paediatric)- 8 Cm / 12.5 Cm * 5.5Fr. Thermosensitive Polyurethane Triple Lumen Paediatric Cvc. * It Has Anti Kinking Nitnol Guide Wire , Denham Pin , Disposable Ventilator Heated Wire Circuit With Water Chamber. Should Be Tidel Volume Range From 200 Ml To 1500 Ml. Should Be Minimal Deade Space 55 Ml. Medical Grade Pe. Connector 15/22 Mm M/F For Y Piece, Connector 15/22 Mm M/F For Ett & Mask. Standard Length . 6Ft. Or Expandable Length. , Distractor 6, 8 & 10 , Drill Bit (S.S) Sizes : 2 Mm, 2.7 Mm, 3.5Mm, 4.5 Mm , Et Connector With Catheter Mount: Connector With Bronchoscopy Port For Endotracheal Tube / Tracheostomy Tube , Foreign Body Hook(Ent) , Hemoconcentrator Adult * Polyurethane Membrane Material Achieves High Ultrafiltration Rate For Efficient Blood Concentration In A Short Time, While Restriciting Removal Of Albumin , Which Is Vital To The Humen Body.* Effective Surface Area - Approx1.1 M2* Priming Volume - 70 Ml* Blood Ports - 1/4 Slip / Luer Locks* Filtrate Port - 1/2 (1/4 Adapter)* Blood Flow Range - Min. 100 - Max. 500 Ml/Min. , Hemoconcentrator Paediatric * Polyurethane Membrane Material Achieves High Ultrafiltration Rate For Efficient Blood Concentration In A Short Time, While Restriciting Removal Of Albumin , Which Is Vital To The Humen Body.* Effective Surface Area - Approx 0.5 M2* Priming Volume - 35 Ml* Blood Ports - 1/4 Slip / Luer Locks* Filtrate Port - 1/2 (1/4 Adapter)* Blood Flow Range - Min. 100 - Max. 500 Ml/Min. , High Pressure Extention Line 120Cm Male/Female For Drug Eluting Stent , Hydrophilic Guide Wire • Wire Should Be Nitinol Core With Hydrophilic Coated. • Length Should Be Standard -150Cm.• Tip Should Be Available Straight & “J”, Dia-0.18” To 0.038”. , Infusion Pump For Sustained And Slow Injection Of Drugs, Front Loading Syringe (Upto 50Ml), 4 Step Programming Sequence, Programable Infusion Rate 0.1 Ml/Hr To 1200 Ml/Hr (Bolus Rate Upto 1200 Ml/Hr), Audio Visual Alarm: Battery Low, Battery Empty, Occulusion, Syringe Near Empty, Syringe Error, Not Infusing, Different Buttons For Turning On Syringe Pump And Starting Infusing, 3 Occlusion Pressure Settings: Low(L): 300Mmhg +/- 100Mmhg Medium (C): 500Mmhg +/- 100 Mmhg High(H): 800Mmhg +/- 100Mmhg, Ce & Iso Certified , K Nail -Sizes 6 To 12 Mm Dia. , K.Wires (Kirshners Wire) (S.S) Size : 1 Mm , 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm , Leucocyte Depleting Filter , Needle, For Spinal Anaesthesia, Disposable, Thin Walled Technology, Metal Stylet & Metal Introducer, Extra Long Needles For Obese Patients Assorted Size. , Nitrrous Oxide Cylinder 5 Lit Wc, A Typeis 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : With Pin Index Chromeplated Valves As Per Is 3745, 2006 Inlet Size 18.16 Mm And Up 177 Kg/Cm2. Token Part No. Vp-00002-N2o(Yoke Type Valve Connection For Small Medical Gas Cylinders) 1. Water Capacity : 5.0 Lts. 2. Hydrostatic Test Pressure : 250 Kgf/Cm2 Maxm. 3. Working Pressure : 150 Kgf/Cm2 4. Cylinder Outside Dia : 108.58 Mm. 5. Min Wall Thickness : 3.5 Mm. 6. Weight : 8.0 Kgs. 7. Length : 735 Mm. 8. Gas Capacity : 0.75 Cum , Oximetry Cable For Cco Monitor (Reusable) , Oxygen Cylinder 46.7 Lit Wc D Type Is 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : 1. Water Capacity : 46.7 Lts. 2. Hydrostatic Test Pressure : 250 Kgf/Cm2 Maxm. 3. Working Pressure : 150 Kgf/Cm2 4. Cylinder Outside Dia : 232 Mm. 5. Cylinder Min Wall Thickness : 5.2 Mm. 6. Weight : 52.0 Kgs. 7. Length : 1365 Mm. , Oxygen Cylinder 5 Lit Wc A Type Is 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : With Pin Index Chrome Plated Valves As Per Is 3745, 2006 Inlet Size 18.16 Mm And Up 177 Kg/Cm2. Token Part No. Vp-00001-Mo2(Yoke Type Valve Connection For Small Medical Gas Cylinders) 1. Water Capacity : 5.0 Lts. 2. Hydrostatic Test Pressure : 250 Kgf/Cm2 Maxm. 3. Working Pressure : 150 Kgf/Cm2 4. Outside Dia : 108.58 Mm. 5. Min Wall Thickness : 3.5 Mm. 6. Weight : 8.0 Kgs. 7. Length : 735 Mm. 8. Gas Capacity : 0.75 Cum , Oxygen Cylinder B Type Is 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : Cylinder 10 Lit Wc With Valve Guard With Valve Fitted With Ss304 Flow Control Spindle And Nylon66 As Per Is : 3224,2002, Inlet Size 2 5.4Mm, Wp 205 Kg/Cm2 Token No. Part No. Vo-00128. 1. Hydrostatic Test Pressure :- 250 Kgf/Cm2 Maxm. 2. Working Pressure :- 150 Kgf/Cm2 3. Water Capacity :- 10.2 Ltr + 5%/- 0% 4. Outside Dia : 139.8 Mm. 5. Min Wall Thickness : 4.2 Mm. 6. Length : 855 Mm. 7. Weight (Approx) : 15.2 Kg. 8. Material : Manganese Steel With Yield Strength Greater Than 48Kgf/Cm2. , Pain Relief Detachable Silicon Implantable Catheter 9.6Fr With Antikinking Sleeve Sitimplant Titanium Device With Peel Away Desilet, Compatible With Mri Frequency-Height (8Mm-11Mm) & Weight (3.5G-10.5G) With Tunnellisation Needle And Teflon Coating Nitinol Guide Wire, Bloodless Access & Vein Lifting Device. Silicone Septum Access Long Length Non Coring Needles ,Sizes-20G/22G & Length-15 To 30Mm , Pfn Short And Long Material-Titanium, With Required Screw (Support Of Instrument Should Be Provided For Operation) , Pigtail Diagnostic Catheter, Size: 4Fr., 5Fr. & 6Fr. • Catheter Length Should Be 100 - 125Cm. • Tip Should Be Straight / Angled , Platinum Chromium Coronary Stent System , Pulmonary Artery Swan Ganz Catheter With Introducer Kit * 5 Lumen Pa Catheter To Use For Pa Pressure And Also To Get Cardiac Output While Using It With Any Bed Side Monitor With Cardiac Output Module Installed In Any Department. * This Catheter Has To Be Introduced Through Introducer Sheath Kit Of Fr 8.5 , Recon Femoral Interlocking Nail- With Instrument Set Material - Titanium With Required Screw , Retractor, Abdominal Doyens Size 10 Cm. , Retractor, Abdominal Doyens Size 7.5 Cm. , Reusable Linear Cutter Stapler, Size: 55Mm/ 60Mm With Appropriate 100 Pcs Of Cartridge , Rush Nail Assorted Size , Scalp Vein Set (Disposable) Size 20G,Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 21G Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 22G Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 23G, Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 24G,Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Schanz Pin 1.5, 2.5, 3.5Mm , Schanz Pin Size : 2.5 Mm To 4.5 Mm & 6.5Mm Cancellous , Schanz Pin Size : 2.5 Mm To 4.5 Mm Cortical , Scissor, Blunt-Blunt Scissors. Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Curved, Made Of German Ss , Scissor, Blunt-Blunt Scissors. Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Straight, Made Of German Ss , Scissor, Episiotomy, Curved, 6 Inch, Made Of German Ss. , Scissor, Episiotomy, Curved, 8 Inch, Made Of German Ss. , Scissor, Episiotomy, Curved, 9.5 Inch, Made Of German Ss. , Scissor, Episiotomy, Straight, 6 Inch, Made Of German Ss. , Scissor, Episiotomy, Straight, 8 Inch, Made Of German Ss. , Scissor, Episiotomy, Straight, 9.5 Inch, Made Of German Ss. , Scissor, Sharp-Blunt Scissors. One Pointed & One Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. 8 Inch. Straight, Made Of German Ss , Scissor, Sharp-Sharp Scissors. Pointed Tips, Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Curved, Made Of German Ss , Scissor, Sharp-Sharp Scissors. Pointed Tips, Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Straight, Made Of German Ss , Scissor, Stitch Cutting Scissor,Fine Sharp Edges, Tc Inserts, Size. 5.5 Inch, Curved, Made Of German Ss , Scissor, Stitch Cutting Scissor,Fine Sharp Edges, Tc Inserts, Size. 5.5 Inch, Straight, Made Of German Ss , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 11, Curved, Made Of German Ss. , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 11, Straight Made Of German Ss. , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 9, Straight Made Of German Ss. , Slow Infusion Pump, Motor Driven With Drop Rate Range Of Minimum 1-250D/Min And Flow Rate Range Of Minimum 1-1000Ml/H, Minimum Kvo Rate Of 1.0Ml/H, Anti Bolus Function And 3 Level Occlusion Pressure Monitoring. , Ss Wire Sizes 18, 20, 22, 24 , Stainless Steel Wire - 16, 18, 20, 22 G , Steinman Pin , Sterile Disposable Spinal Needle For Single Use 22G X 3 Inch , Supraglottic Airway Device 2Nd Generation Specification : 1. Cuff-Should Be Made From Soft Gel Like Material ( Medical Grade Thermoplastic Elastomer) That Should Create A Non-Inflatable, Anatomical Seal Of The Pharyngeal, Laryngeal And Perilaryngeal Structures. 2. 15 Mm Connector. 3. Position Guide 4. Gastric Channel / Drainage Port. 5. Bite Block 6. Buccal Cavity Stabilizer 7. Epiglottis Blocker 8. Display Of Size – For Quick, Easy Reference And Weight Guidance. 9. Can Be Used As A Conduit For Intubation. 10. Size 1,1.5,2,2.5,3,4,5. , Syringe, Disposable Plastic 50 Ml In Sterile Packing (Luer Mount/Luer Lock, Central/ Eccentric Nozzle) , Tfn With Instrument Set Material- Titanium, With Required Screw , T-Handle Drill , Thrombus Aspiration Catheter. • Pre Loaded Stylet. • Fully Braided Shaft . • 20 - 24Cm Long Rapid Exchange Lumen. • Clearly Visible 10Cm Depth Marker 90Cm From Distal Tip To Support Insertion Into Guiding Catheter, Catheter Length 130 - 140 Cm , Titanium Elastic Nail (Tens) Dia - 2.5, 3,3.5 And 4Mm In Diameter Size : 44Cm , Titanium Elastic Nail 2.5 Mm To 4 Mm With Corresponding Instrument Set. , Tuning Forks Of 256, 512, 1024 Hz Specification : A. Of Frequencies 512 Hz B. Made Up To Good Quality Rust Free Stainless Steel. C. Should Have Minimum Decay Time Of 40 Sec. D. Footplate Should Be Present. , Venous - 12F, 14F, 16F, 18F, 20F, 24F & 28F (Metal Angled Tip) 30,32,34,36 (Straight) , Volume-Based Lung Exerciser 2500Ml 1. One-Way Valve To Ensure Patients Inhale, Rather Than Exhale Into Unit 2. Adjustable Incentive Marker 3. Highly Visible Piston With Universal Graphics 4. Oxygen Port To Allow Administration Of Supplemental Oxygen 5. Bed Rail Hook For Positioning At The Patient Bedside , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Equipment Should Be Us Fda/ Ce/ Bis/ Cdsco Approved (Us Fda/ Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/ Cdsco Is Not Available). 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 6. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).
Contract Date: May 15, 2025 Contract Value : ₹ 1
Government Departments No of Bidders 79
West Bengal View Result →
45.
Public Administrative Department #7222932 AOC
supply installation testing and commissioning work of Audio System at Murshidabad Zilla Parishad Conference Hall at Murshidabad Zilla Parishad,Berhampore,District-Murshidabad.(5th SFC 2023-24) , Sitc Of Wired Gooseneck Microphone Chairman Unit With Base, Electret Condenser Capsule, Freqency Response @ 30Hz - 18Khz, Cardioid Polar Pattern, -36Db Sensitivity, 75 Ohms Impedance, Powered By +48V Phantom Power/ 2 Aaa Batteries.Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Wired Gooseneck Microphone Delegate Unit With Base, Electret Condenser Capsule, Freqency Response @ 30Hz - 18Khz, Cardioid Polar Pattern, -36Db Sensitivity, 75 Ohms Impedance, Powered By +48V Phantom Power/ 2 Aaa Batteries.Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Conference Controller Unit Having Qualiser Comprising Of Knobs At 250Hz, 2Khz And8khz,Volume Control For Mic 1 Input, Volume Control For Mic 2 / Aux Input, Headphone Input And Volume Contro,Master Volume Control, Sliding Switch For Equaliser On/Off Boost/Cut At Center Frequencies, +6Db To -6Db. Equalizers Transfer Gain ±1Db,Pa Output, Rated Output Impedance,100 Ohm, Snr >-50Db At Rated Output (Un Weighted Filter) Rec Out Rated Output Impedance 1 K Ohm Snr >-50Db At Rated Output (Un Weighted Filter) Mechanical Dimensions (H X W X D) 88Mm X 361Mm X 252Mm Weight 5.5 Kg Color Charcoal (Ral 10736) And Grey (For Rear Cover) Environmental Operating Temperature -5ºc To 45ºc Storage Temperature -40ºc To +70ºc. Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Digital Signal Processor With Feedback Subpression Having Sampling Rate :- 48Khz/44.1Khz, Signal Delay :- 1.9 Msec (Ad-Da @48Khz) , Total Harmonic Distortion :- “0.05% (+4Dbu, Gain:-6Db, 48Khz) 0.1% (+4Dbu, Gain: +66Db, 48Khz)” (Measured With A 18Db/Oct Filter @80Khz), Frequency Response:- 20Hz To 20Khz: Max:+0.5Db, Min:-1.5Db, Dynamic Range :- 107Db (Typ. Gain:-6Db), Cross Atlk:- -100Db (@1Khz), Heat:- 55.9Kcal/H Max , Power Requirements:- Ac100v-240V 50Hz/60Hz , Power Consumption:- 65W , I/P 1-8 :- +66Db To -6Db, Memory Bank = Preset: 50, Phantom Power = +48V.Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of 12 Channel Audio Mixer Having Frequency Response Input To Stereo Out +0.5 Db/-1.5 Db (20 Hz To 48 Khz), Refer To The Nominal Output Level @ 1 Khz, Gain Knob: Min Total Harmonic Distortion (Thd+N) Input To Stereo Out 0.03 % @ +14 Dbu (20 Hz To 20 Khz), Gain Knob: Min 0.005 % @ +24 Dbu (1 Khz), Gain Knob: Min Hum & Noise *1 (20 Hz To 20 Khz) Equivalent Input Noise -128 Dbu (Mono Input Channel, Rs: 150 O, Gain Knob: Max) Residual Output Noise -102 Dbu (Stereo Out, Stereo Master Fader: Min) Crosstalk(1 Khz) *2 -78 Db Input Channels 12 Channels: Mono [Mic/Line]: 4, Mono/Stereo [Mic/Line]: 2, Stereo [Line]: 2 Output Channels Stereo Out: 2, Phones: 1, Monitor Out: 1, Aux Send: 2, Group Out: 2 Bus Stereo : 1, Group: 2, Aux: 2 (Mg12xu/Mg12x: Incl. Fx. Level Meter Pre Monitor Level 2 × 12 -Segment Led Meter [Peak, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 Db] Built-In Effect (Mg12xu/Mg12x) Spx Algorithm 24 Programs, Parameter Control: 1, Foot Sw: 1 (Fx Rtn Ch On/Off) Usb Audio (Mg12xu) 2 In / 2 Out Usb Audio Class 2.0 Compliant, Sampling Frequency: Max 192 Khz, Bit Depth: 24-Bit Phantom Power Voltage +48 V Power Requirements Ac 100-240 V, 50 Hz/60 Hz Power Consumption 22 W Dimensions (W × H × D) 308 Mm × 118 Mm × 422 Mm (12.1 × 4.6 × 16.6) Net Weight Mg12xu, Mg12x: 4.2 Kg (9.3 Lbs), Mg12: 4.0 Kg (8.8 Lbs) Included Accessory Ac Power Cord, Technical Specifications (This Leaflet) Optional Accessory Rack-Mount Kit: Rk-Mg12, Foot Switch: Fc5 ,Operating Temperature 0 To +40 °C. Make:- Yamaha /Bosch/Ev.Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Audio Amplifire Having Mains Power Supply/ Voltage, 230/115 Vac, ±10%, 50/60 Hz, Inrush Current, 1.5 A At 230 Vac / 3 A At 115 Vac, Max Power Consumption, 50 Va, Battery Power Supply, Voltage, 24 Vdc, +15% / -15%, Current Max, 1 A, Performance, Supported Sample Rates (Fs), 24 / 22.05 / 16 / 12 / 11.025 / 8 Khz, Frequency Response, @ Fs=24Khz@ Fs=22.05Khz, 100 Hz To 11 Khz (+1 / -3 Db), 100 Hz To 10 Khz (+1 / -3 Db ),@ Fs=16Khz, 100 Hz To 7.3 Khz (+1 / -3 Db ), @ Fs=12Khz, 100 Hz To 5.5 Khz (+1 / -3 Db), @ Fs=11.025Khz, 100 Hz To 5 Khz (+1 / -3 Db), @ Fs=8Khz 100 Hz To 3.6 Khz (+1 / -3 Db),L Distortion, <0.1% At 1 Khz, S/N (Flat At Max Volume), >80 Db, Supervision Dac, 1 Hz, Pilot Tone, Line Input, 1 X, Connector, 3-Pin Xlr, Balanced, Sensitivity, 1 V, Impedance, 20Kohm, Cmrr, >25 Db (50, Hz-To 20 Khz), Line Input, 1 X, Connector, Cinch, Unbalanced, Sensitivity, 1 V, Impedance, 20Kohm, Trigger, Input, 6 X, Connector, Screw, Activation, Contact Closure, Supervision Method, Cable Loop Resistance Check, Line Output, 1 X, Connector, 3-Pin Xlr, Balanced, Nominal Level, 1 V, Adjustable, Impedance, <100 Ohm, Line Output, 1 X, 2, | Lbb 1965/00 Plena Message Manager, Operating Temperature-10 ºc To +55 ºc (14 ºf To +131 ºf), Storage Temperature-40 ºc To +70 ºc (-40 ºf To +158 ºf).Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Wireless Microphone Supply Of Uhf Wireless Microphone With Dual Channels, Frequency 865-867Mhz, Carrier Wave Stability @ 10Ppm, Senitivity @ -105Db @ Sinad=12Db, 85Db Typical Image Rejection, 75Db Typical Spurious Rejection, 40Hz ~ 18Khz Frequency Response, > 200 Ft Working Distance, 2.2 K? Af Output Impedance, Lcd Display Wireless Microphone Supply Of Uhf Wireless Microphone With Dual Channels, Frequency 865-867Mhz, Carrier Wave Stability @ 10Ppm, Senitivity @ -105Db @ Sinad=12Db, 85Db Typical Image Rejection, 75Db Typical Spurious Rejection, 40Hz ~ 18Khz Frequency Response, > 200 Ft Working Distance, 2.2 K? Af Output Impedance, Lcd Display Wireless Microphone Supply Of Uhf Wireless Microphone With Dual Channels, Frequency 865-867Mhz, Carrier Wave Stability @ 10Ppm, Senitivity @ -105Db @ Sinad=12Db, 85Db Typical Image Rejection, 75Db Typical Spurious Rejection, 40Hz ~ 18Khz Frequency Response, > 200 Ft Working Distance, 2.2 K? Af Output Impedance, Lcd Display .Make:- Sonodyne, Shure,Ev,Mpro . Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Celling Mount Speaker Having Maximumpower 75 W Rated Power 30 / 15 / 7.5 / 3.75 W (1.88 W Only, 70 V). Sound Pressure Level At 30 W / 1 W (1 Khz, 1 M) 106 / 91 Db (Spl) Effective Frequency Range (-10 Db) 50 Hz To 20 Khz Coverage (Conical) 110° Rated Voltage 70 V Or 100 V Rated Impedance 167 Or 333 Or 8 Ohm Lf Transducer 200 Mm (8 In.) Polypropylenecone Hf Transducer 25 Mm (1 In.) Ti Mylar Laminate Connector 3 Pole Ceramic Screw Terminal Block Mechanical Diameter 300 Mm (11.8 In) Maximum Depth 255 Mm (10 In) Ceiling Thickness 4 To 25 Mm (0.16 To 1.00 In.) Mountingcut Out 272 + 5 Mm (10.75 + 0.20 In.) Material Baffle Abs (Ul94v0) Back Can Zinc Plated Steel Grille Powder Coated Steel Weight 5 Kg (11 Lb) Color White (Ral 9010) Environmental Operating Temperature -25 ºc To +55 ºc (-13 ºf To +131 ºf) Storage And Transport Temperature -40 ºc To +70 ºc (-40 ºf To +158 ºf) Relative Humidity <95%. Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of Cable Assembly Having Flame Retardant Acc. To Iec 60332-1 60S Halogen Level Acc. To Iec 60754-2 Ph >4.3, Conductivity 60% Region Regulatory Compliance/Quality Marks Europe Ce Decl Ec Accessories Parts Included Quantity Component 1 Network Cable, 10 M Technical Specifications Electrical Wire Copper, Stranded 1 Mm2 Resistance Attenuation , Length 10 M (30.27 Ft), Operating Temperature -40 °C To +65 °C (-40 °F To 149 °F) Humidity 15% To 90% Air Pressure 600 To 1100 Hpa. Make:- Ev/Bosch/Akg. Warrenty:- 3 Years Onsite Warrenty With Parts & Service From Oem , Sitc Of 16 Awg , 1.5 Sqmm X 2 Core Armoured Cablespeaker Cable. Make:- Rr/Krystal/Mx , Sitc Of Microphone Cable Having Conductor Awg Size And Stranding 0.52 Mm [21 Awg] Stranded Copper Wire, Class 5 Acc. To Iec 60228 / Vde 0295 Material Bare Copper, (Cu-Etp1, Cw003a Acc To Din En 13602) Insulation Material Polyethylene Wall Thickness Tba Diameter Tba Colour Code Tba Assembly Lay Length Tba Fillers Cotton As Required Shield Material Bare Copper Braid Coverage 85% +/-5% Jacket Material Matte Finish Polyvinyl Chloride Colors Tba Wall Thickness Tba Diameter 0.260” +/- 0.005” [6.2 Mm +/- 0.2 Mm] Markings Type Surface Printing Legend Tmb Procable Pcmic52 - .52Mm Professional Low Capacitance Balanced 1 Pair Microphone Cable Electrical Specifications Capacitance Between Conductors: 60 Pf/M @ 1 Khz Conductor To Shield: 120 Pf/M @ 1 Khz Insulation Resistance 100 Mohm X Km At 20 °C Conductor Resistance 39 Ohm/Km At 20 °C Operating Voltage 50/75 V Ac/Dc Max. Test Voltage Between Conductors: > 1.2 Kv Conductor To Shield: > 0,8 Kv Physical Temperature Rating Static: -30 To +80 °C Operating: -10 To +70 °C Weight .Make:- Mx/Bespeco/Krystal. , Syupply & Installation Of Audio Xlr Male & Female Jack.Make:-Make:- Mx/Bespeco/Krystal. , Sitc Of 6500 Lumen Short Throw 4K Projector Having Projection System: 0.48 Wuxga, Native Resolution: 1920X1200, Brightness: 6000 (Ansi Lumens), Contrast Ratio: 3000000:1, Display Color: 1.07 Billion Colors, Light Source Type: Laser Phosphor System, Light Source Life, (Hours) With Normal Mode: 20000, Light Source Life (Hours) With Supereco Mode: 30000 (Eco), Lamp Watt: Nichia 74W X2, Lens: F=1.83-1.86, F=8.6-9.4Mm, Projection Offset: 0%, Throw Ratio: 0.81-0.89, Optical, Zoom: 1.1X, Digital Zoom: 0.8X-2.0X, Image Size: 60-200, Hrow Distance: 1.04-3.83M, ([email protected]) Keystone: H:+/-40° , V:+/-40°, Lens Shift V. Range: +50%, -50%, Lens Shift H. Range: +23%, -23%, Audible Noise (Normal): 36Db, Audible Noise (Eco): 29Db, Input Lag: 16Ms, Resolution Support: Vga(640 X 480) To 4K(3840 X 2160), Hdtv Compatibility: 480I, 480P, 576I, 576P, 720P, 1080I, 1080P, 2160P, Video Compatibility: Ntsc, Pal, Secam, Horizontal Frequency: 15K-135Khz, Vertical Scan Rate: 23-120Hz, Input:- Computer In (Share With Component): 1, Composite: 1, S-Video: 1, Hdmi: 2, (Hdmi 2.0, Hdcp 1.4/2.2), Audio-In (3.5Mm): 1, Audio-In (Rca R/L): 1, 3D Vesa (Sync): 1, Hdbaset: 1 , Output:- Monitor Out: 1, Audio-Out (3.5Mm): 1, Speaker: 10W X2, Usb Type A (Power): 1 (5V/ 1.5A), 12V Trigger (3.5Mm): 1 Make:- Viewsonic/Sony/Sharp , Sitc Of 55 Inch Led Commercial Display Ahaving Panel Size: 55, Type/ Tech: Tft Lcd Module. Ips Type, Dled Backlight, Display Area (Mm): 1209.6 (H) X 680.4 (V) (55” Diagonal), Native Resolution: 3840 X 2160, Aspect Ratio: 16:9, Colors: 1.07B Colors, Brightness: 400 Nits (Typ.), Contrast Ratio: 1200:1 Typ., Response Time: 8 Ms, Viewing Angles: H = 178, V = 178 Typ., Backlight Life: 30,000 Hours Min, Surface Treatment: Anti-Glare, 2H, Haze 3%, Bezel: Slim, Orientation: Landscape, Hdmi: X2, Dvi: X1, Audio: X1 (3.5Mm), Rs-232: X1, Ir Pass Thru: X, Audio: X1 (Rca), Spdif: X1 (Fiber), Ir Pass Thru: X1, Make:-Viewsonic/Sony/Sharp , Sitc Of 1:16 Hdmi Splitter Having 1X16 Hdmi Splitter Uses A Single Hdmi Source,Accessing To Multiple Hdmi Sinks. It Allows One Hdmi Device To Be Split Easily To Sixteen Hdmi Compatible Monitors Or Projectors. The Splitter Can Also Be Placed At The End Of A Long Hdmi Cable To Regenerate The Hdmi Signal. Resolution Up To 3840X2160/30Hz. Support Resolution Up To 3840X2160/30Hz,Support Hdmi 1.4B,Support 4K X 2K,Support 3D Video Format,Support 3.2Gbps Data Rate For Tmds Clock Up To 320Mhz,Support Deep Color 8/10/12Bit,Support Awg26 Hdmi Standard Cable. When The Resolution Is 1080P And Below, Input Up To 15 Meters,Output Up To 25 Meters. When The Resolution Is 4K, Input Up To 12 Meters, Output Up To 15 Meters. Support Displaying Single Source, Multi-Output High-Definition Signal Source From Dvd Player A/V Receiver, Set-Top Box., Strong Compatibility: Supports 1080P, 1080I, 720P, 576P, 576I, 480P, 480I. Supports Audio Formats Dolby True Hd, Dts, Dts-Hd, Dsd, Hdcp, Edid.Make:-Krammeer/Mx , Sitc Of Hdmi Cable High Speed 1080P Or 4K @30Hz 10.2 Gb/S, 30Mtr/50 Mtr.Make:- Eaton/Krammer , Sitc Of Desktop Computer With 1Tb Ssd/Nvme/I5/13Th Gen/8Gb Ram/4 Gb Dedicated Graphics/22Inch Monitor.Make:- ( Hp/Dell/Acer) , Installation Of All Audio & Video Equipments.
Contract Date: Apr 09, 2025 Contract Value : ₹ 19.33 Lakh
Local Bodies No of Bidders 3
West Bengal View Result →
46.
Educational and Research Institute #7183083 AOC
E-Tender For Supply, Installation And Commissioning Of Devices, Machineries, Equipment And Tools, Etc. In Laboratories And Workshop Of Civil Engineering, Instrumentation And Control Engineering, Science And Humanities Depart. Of Maynaguri Govt. Poly E-Tender For Supply, Installation And Commissioning Of Devices, Machineries, Equipment And Tools, Etc. In Laboratories And Workshop Of Civil Engineering, Instrumentation And Control Engineering, Science And Humanities Dprt. Of Maynaguri Govt. Poly. , Aggregate Crushing Value Test Apparatus As Per Is:2386 (Part 4) 1963 , Auger Extra Extension Rod, 1 Meter Long With Screw Type Fitting 6 To 12 Ms Auger To Drilling Into Soil Upto 3 M Manually. Mostly Used For Normal Soil And Earthing Pit Purpose. , Blaine Air Permeability Test Apparatus For Measuring Fineness Of Cement As Per Is 5516. Air Permneability Apparatus (Blaine Type) With Isi Certification Mark Is;S516, Fitted In Aluminium Box With Permeability Cell. U Tube Manometer, Mounted On Stand. Perforated Metal Disc. Plunger. Rubber Stopper. Rubber Tube, 20 Cm Long. Filter Paper Discs (Twelve Nos.). Dibutylphthalate Liquid, 100 Ml Bottle. Punch. Non Perforated Disc. Suction Bulb And All Other Accessories Required As Per Is Code. It Should Be Supplied With Standard Cement Required For Calibration(Calibration To Be Done By The Supplier In Presence Of Concerned Authority) And Mercury Of Requisite Quantity, Crucible. , Bod Incubator Chamber Made Of Aluminium 375 Mm X 375 Mm X 450 Mm With 10 Numbers 300 Ml Bod Bottle. Specifications: Temperature Range 5 To 60°C, Temperature Accuracy + / - 0.5°C, Temperature Uniformity + / - 0.5°C, Power 220 Volt, Temperature Control Microprocessor Control, Cabinet M.S. Steel Powder Coated Inner Chamber Stainless Steel, Shelves 3 Stainless Steel, Etc. , Buoyancy Balance Buoyancy Balance Helps In Determining The Specific Gravity And For The Water Absorption Of The Aggregate. It Is Fitted With The 15 Kg Capacity X 0.5 Gm Of The Electronic Balance. Buoyancy Balance Comprising Of An Electronic Balance Of 15 Kg Capacity, Chain & Ratchet Assembly In A Steel Tubular Frame. , Cbr Value Apparatus As Per Is 2720 (Part-16)-1987 Laboratory California Bearing Ratio Test Apparatus, Motorised Laboratory Cbr Apparatus Meets The Essential Requirements Of Is: 2720(Part Xvi) With The Mould As Per Of Is: 9669. , Cod Digester Along With Vials,Holding Rack, 16 Sets Of Glassware (Cod Digestion Tubes With Screw Caps And Cod Air Condensers) Holds 16 Nos. Of 16 Mm X100 Mm Dia Tube. Temperature Range 0- 200 Degree Celcious, Temperature Can Be Set Within This Range. Time Range 0 To 120 Minutes, Stability Plus Minus 0.5 Degree Centigrade, Over Temperature Cut Off. When Digestion Complete, Reactor Automatically Turns Off And Will Sound An Alarm. 230 Volt. 16 Mm X 100 Mm Culture Tubes With Tfe-Lined Screw Caps ( 16 Nos.) Holding Racks Of Stainless Steel. , Compacting Factor Test Apparatus Compaction Factor Apparatus As Per Is: 5515-1983 With Nabl/Nccbm Certificate. , Constant & Falling Headpermeability Apparatus With Water Reservoir As Per Is 2720 (Part 17)-1986. Laboratory Permeability Apparatus: Is: 2720 (Part-17), Is 11209 Suitable For Both Constant Head As Well As Falling Head Permeability Tests. Stand With Three Glass Tubes Of 6 Mm, 10 Mm And 20 Mm Dia Approx. Metallic Mould 100 Mm Dia X 127.3 Mm Height, 1000 Ml Volume. Extension Collar 100 Mm Dia X 60 Mm Height. Drainage Base Plate With A Recess For Porous Stone And An Outlet Valve. Metallic Clamping Ring Drainage Cap With Recess For A Porous Stone And Fitted With Inlet Valve And Air Release Valve. Dummy Plate To Serve As False Bottom During Compaction. Porous Stone For Drainage Base Plate. Porous Stone For Drainage Cap Rubber Connection Tube 3M Long, With Pinch Cock. Overhead Tank, Required For The Constant Head Method Made Of Steel, Approx. 37.5 Cm Dia And 1M High. It Is Provided With An Inlet Port At The Top, Six Outlets At The Bottom With Cocks, Air Inlet And Water Filling Tube At The Top. An Arrangement To Indicate The Water Level Is Also Provided With Rammer 2.6Kgx310 Mm Controll Fall And 4.9Kgx450mm Controll Fall. , Cube Mould, Size: 150 Mm X 150 Mmx 150 Mm (Made Of Cast Iron With Isi Certification) , Cube Mould, Size: 70.6 Mm X 70.6 Mmx 70.6 Mm (Made Of Steel With Isi Certification) , Cylindrical Core Cutter With Steel Dolley, Steel Rammer And Other Accessories. Apparatus Should Consists Of: 1. Cylindrical Core Cutter Of Steel Material Of About 130 Mm Long And 100 Mm In Diameter. 2. Steel Rammer Of About 140Mm.Dia., 75Mm Height And 900Mm (Total Height Including Handle.).Weight Of Rammer Should Be Of 9 To 10 Kg. 3. Steel Dolly 25 Mm High And 100 Mm In Diameter. 4. Palette(Steel) Knife 5. Steel Ruler. 6.Metal Straight Edge. 7. Spade Or Pickaxe.. 8 Apparatus To Extract Core Sample. 9.Moisture Cans(Six Nos. Of Aluminium Material). , Cylindrical Metal Measure (3, 15 And 30 L Capacity) For Determination Of Specific Gravity Of Coarse Aggregates As Peris 2386 (Part Iii) : 1963 , Density Basket Conforming To Is: 2386(Part-Iii)-1963 For Determination Of Specific Gravity & Water Absorption. It Is Made Of G.I. Wire-Mesh Of Approximate Size 20 Cm Dia X 20 Cm High. Complete With Handle. , Desiccator( 250Mm Dia , Material Pp/Pc) , Digital Flocculator With Six Jar (Standard Jar Tester) Designed For Floc Formation Test In Water Treatment Plant. Uniform Stirring Of Up To 6 Samples Simultaneously. Variable Speed Of 20-100 Rpm. Heavy Duty 1/20Hp Motor With Gear Train Mounted On A Mild Steel Housing. Supported By Six Rods On A Bench. Stainless Steel Stirring Paddlers With Adjustable Height. Locking Collars Or Stirring Rods Permit Adjustment Height Of Paddle Height. Spacing Of 6” (150Mm) Between Rod Permit Uses Up To 1000Ml Beaker. Housing Material: Crc / Ms Sheet Duly Powder Coated. Power Consumption: 220/230V Ac Supply 50Hz Single Phase. Motor: 1/ 20Hp Motor Good Quality. Compulsory: Digital Rpm Meter/Timer/Dc-Drive For Low Rpm Illumination: By Tube Lights (With Choke + Stirrer) Duly Covered By Perspex Sheet Having Control Switch Fitted On The Control Panel. , Digital Planimeter Digital Planimeter- (Specification: Roller Type, Accuracy-(+-) 0.2%(Within (+-) 2/1000 Pulses), Accumulated Measuring Value Maximum 10 Sq.M (Scale 1:1), Measuring Range-A) Maximum Vertical Width 325 Mm,B) Horizontal Roller Rotatant Length-30M, Display Liquid Crystal, 8 Digit Figures. Higher Specification Will Be Preferred.) , Digital Rebound Hammer With Calibration Anvil (For Concrete Compressive Strength Analysis In The Field) Should Come With Rechargeable Batteries Including Charger. Capabality Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis. Should Conform To Astm C-805, En 12 504-2, Bs -1881 202 And Other International Standards. Range:10 To 70N/Mm2 Impact Energy: 2.207 N-M Additionally The Following Minimum Specifications Must Be Met. Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Relbound Number, Compressive Strength And The Median. Should Come With Rechargeable Batteries Including Charger. Capability Of On Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Softvware And The Required Cables For Connecting To The Computer Should Be Provided. A Calibration Anvil Should Be Provided. , Direct Shear Test Apparatus As Per Is 2720 (Part13)-1986 12 Speeds, Motorised Is: 2720 (Part Xiii) Is: 11229 Supplied Complete With Proving Ring And 2Nos. Of Dial Gauge Of 0.01X 25Mm. 2Kn With Dial Gauge 2 Nos.& Compression Tension Proving Ring 2Kn; Type Of Shear : Direct / Residual Measurement, Operation : Motorised The Unit Is Provided With A Turret Type Gear Box To Get 12 Different Constant Rates Of Strain I.E 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004, And 0.0002 Mm/Min. And Arrangements To Carry Out Residual Shear Strength Tests. Suitable For Operation With 220V, 50 Hz, Single-Phase Supply. It Comprises: - I) Shear Box Assembly (Halves Of The Shear Box 2 Nos),60 Mm Square, Complete With A U-Bracket, Guide Pins And Spacing Screws, Made Of Brass. Ii) Gripper Assembly Consisting Of Two Plain Grid Plates, Two Perforated Grid Plates, One Base Plate And One Loading Pad, All Made Of Brass. Iii) Two Porous Stones, Each 6 Mm Thick, Fitting The Shear Box Iv) Shear Box Housing Of Brass, Complete With Two Ball Roller Strips. V) Loading Unit With Normal Loading Of 3 Kg/ Cm2 On 60 Mm Square Specimen. Vi) Specimen Cutter For A Specimen Size Of 60 Mm X 60 Mm X 25 Mm. Vii) The Unit Is Provided With A Turret Type Gear Box To Get 12 Different Constant Rates Of Strain I.E 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004, And 0.0002 Mm/Min. And Arrangements To Carry Out Residual Shear Strength Tests. Surcharge Weights To Attain Normal Stress Of 3 Kg/Cm2 1 Set, Surcharge Weight Set Comprises Of Following Weights : 0.05 Kg/Cm2: 4 Nos.; 0.10 Kg/ Cm2: 1 No.; 0.20 Kg/ Cm2: 1 No.; 0.50 Kg/ Cm2: 3 Nos.; 1.00 Kg/ Cm2: 1 No. 1. Conforming To Is 2720 (Part – 13) Of Latest Edition , Ductility Testing Apparatus As Per Is: 1208 -1978 Ductility Testing Machine (Is: 1208 -1978) For Determining The Ductility Of Asphaltic Bitumen, Native Asphalt, Cut Back Bitumen And Blown Type Bitumen. It Consists Of Three Mould Assemblies On A Base Plate. A Separate Briquette Mould (Total Length 75 0.5 Mm, Distance Between Clips 30 0.3 Mm, Width At Mount Of Slip 20 0.2 Mm, Width At Minimum Cross Section 10 +0.1 Mm, Thickness Throughout 10 + 0.1 Mm) For Casting The Specimens Is Also Supplied. A Water Bath Of 10 Litres Capacity With A Perforated Shelf Not Less Than 50 Mm From The Bottom Of Bath And A Thermostat Controller For Heater. The Machine Has Two Standard Rates Of Travel Of 1 Cm/Mnt And S Cm/Mnt. The Movable Bracket Can Be Arrested Or Released Without Switching Off The Motor By A Clutch Arrangement. Suitable For Operation On 220V, 50 Hz, Single Phase Ac Supply. , Electronic Balance, Capacity 2 Kg. Electronic Digital Balance With Optional Battery Back-Up For Use During Power Failure Having Maximum Capacity Of 2 Kg And Sensitivity As 0.01 G. , Electronic Digital Balance(20Kg/1G) Electronic Digital Balance With Optional Battery Back-Up For Use During Power Failure Having Maximum Capacity Of 20 Kg And Sensitivity As 1 G. , Electronic Digital Balance(25Kg/1G) Electronic Digital Balance With Optional Battery Back-Up For Use During Power Failure Having Maximum Capacity Of 25 Kg And Sensitivity As 1 G. , Pipe Friction Apparatus The Apparatus Is To Be Used To Measure Darcy’S Friction Coefficient (F) For Fluid Flow Through A Given Pipe. The Apparatus Should Consist Of: • A Centrifugal Pump Of 25Mm X 25Mm With 1/2 Hp Mono-Block Pump (Kirlosker Or Equivalent Make), • Sump Tank (80 Cm X 35Cm X 30Cm, Made Of 2Mm Thick Stainless Steel Sheet) To Collect The Water, • Measuring Tank ( 45Cm X 30Cm X 30Cm, Made Of 2Mm Thick Stainless Steel Sheet) Fitted With Piezometer Tube To Measure The Discharge, • G.I. Pipe Of Internal Diameter 25.4Mm (1) And Isi Marked Control Valve And Regulating Valves To Be Provided To Circulate Water, • Bye-Pass Line Is Also To Be Provided Along With Regulating Valve To Regulate The Discharge, The Apparatus Should Consist Of Three G.I. Pipes Of Internal Diameter ½”, 3/4 & 1” Respectively. The Pressure Tapings Are Provided 100Cm Apart On Each Pipe. Each Tapings Are Connected To The Mercury U Tube Manometer To Measure Head Difference. Hand Shuts Valves Are To Be Provided At Each Pipe Inlet And Outlet To Control The Supply In The Pipe. The Tanks And All Other Ms Fittings Should Be Well Epoxy Painted (Both Inside & Outside) To Prevent Rust. 2 Hard Copies Of Operation Manual Are To Be Supplied Along With The Apparatus And Installation And Demonstration Are To Be Given. , Flash And Fire Point Apparatus Pensky Martens Flash Point (Closed) Tester (Electrically Operated) With Npl Certificate Is: 1448 (Part 21) 1209, Ip 34/58, For Determining Flash Point Of Petroleum Products (Above 490C Flash Point Range). It Has A Brass Coil Cup Fitted With A Heat Resistance Handle. The Cup Is Provided With A Lid Which Includes Stirring Device, A Cover, Shutter And A Flame Explosive Device. The Shutter Is Operated By A Spring Handle. A Flexible Shaft Is Provided In The Hand Operated Stirrer. A Cast Iron Stove Is Fitted With A Metal Top Plate Mounted On An Upright Member (Gas Manifold) And It Feeds A Needle Valve-Controlled Burner Supplied With A Hot Plate. The Energy Regulatory Controls The Heating. Suitable For Operation On 220 V, 50 Hz, Single Phase Ac Supply. Flash Point (Open) And Fire Point Cleveland With Npl Certificate Electrical Heating Thermometer Range: -6°C To +110°C (Low Range), 90°C - 370°C(High Range) Ref. Standards - Is:1448 (Part 69), For Determining The Flash And Fire Points Of Petroleum Products, Except For Fuel Oil And Those Products Which Have Open Cup Flash Point Below 79° C (175° F). Consisting Of Cleveland Flash Cup Brass (Dia. 63 - 64 Mm, Height 32.5 - 34 Mm, With A Filling Mark Is Engraved At A Distance Of 9 To10 Mm Below The Surface Along With An Insulated Handle. Gas Test- Jet Assembly Correctly Positioned And Pivoted From A Cast Cup Platform Which Is Fixed To A Heating Bath. Energy Regulator, To Regulate The Rate Of Rise In Temperature 220 V, 50 Hz, Single Phase, Ac Supply. With Thermometer Ip28c Range: -6°C To +110°C. , Heating Mantle For Bitumen Test As Per Is And Branded , Hot Air Oven Electrically Operated With Digital Indicator Cum Controller With Safety Alarm, Range 50°C To 250°±1°C With Air Circulating Fan, S.S, Inside Size 600 Mm X900 Mm X450 Mm , I.S. Sieves[For Aggregate (Coarse And Fine Aggregates & Soil] 1. Sieve G.I. Frame Material Of Construction: G.I; Protective Coating : Powder Coating; Weight: Preferably 800Gm- 900Gm; Wire Mesh Preferably Imported Quality Size: 100Mm, 80 Mm, 63Mm, 50Mm, 40Mm, 31.5 Mm, 25 Mm, 20Mm, 16 Mm, 12.5Mm, 10Mm, 6.3Mm, 4.75Mm, [Bis:460 Part I & Ii 1985, Reaffirmed 2008] ; Pan And Cover For 30Cm Dia Sieves Material Of Construction: G.I; Protective Coating : Powder Coating Upto 6.3 Mm And The Rest Are Made Of Brass (As Mentioned Earlier) Weight: Preferably 800Gm- 900Gm; 2. Sieve Brass Frame 20Cm Dia Material Of Construction: Brass Type: Seamless Weight: Preferably 250Gm- 350 Gm Wire Mesh Preferably Imported Quality Size: 4.75Mm, 2.36 Mm, 2 Mm, 1.18 Mm, 600 Micron, 425 Micron, 300 Micron, 150 Micron, 90 Micron 75 Micron [Bis:460 Part I & Ii 1985, Reaffirmed 2008] Pan And Cover For 20Cm Dia Sieves With Lid And Pan Conforming To Is:460 Part I 1978; With Brushes For Cleaning Sieve. , Length Gauge Conforms To Is:2386 (Part-I) , Los Angels Abrasion Testing Machine With All Accessories Los Angeles Abrasion Testing Machine With Counter (As Per Is: 10070-1982) , Mechanical Liquid Limit Device With Grooving Tool (Casagrande And Astm), Porcelain Evaporating Dish , Spatula, Palette Knives As Pe Is : 9259-1979. , Piezometer Tube It Consists Of Glass Tube Connected To A Vessel At Which Static Pressure Is To Be Measured. It Is The Simplest Of All The Manometers. It Is Used To Measure Very Low Pressures. The Shape And Size Should As Per Indian Standard. The Glass Material Should Be Of Good Quality, Virtually Unbreakable And Should Not Show Any Type Of Distortion During Experiment. The Cost Of The Item Should Include Supplying, Installation, And Demonstration. , Plane Table Set 1.Plane Table – It Should Be Well Seasoned, Good Quality Drawing Board Made Of Pine/Teak Wood Having Smooth, Plane Finish On Its Top And Fitted With Ball And Socket Arrangement Of Size 60Cmx50cmx1.5Cm Or 75Cmx50cmx1.5Cm. 2. Plane Alidade – Plane Alidade Should Be Of Metallic (Brass Or Gun Metal) With A Fine Beveled Edge. 3.Spirit Level:- Tubular Level, Which Can Be Placed In To Perpendicular Position. 4. Trough Compass:- Usually 15Cm Long And Provided With Magnetic Needle To Facilitate Orientation Of The Plane Table And To Mark North Direction. 5. U-Frame Plumbing Fork:- Hairpin-Shaped Brass Frame Having Two Arms Of Equal Length One End Of Frame Is Pointed, The End Of The Frame Carries A Plumb Bob. 6. Clamps :- Minimum Four Nos. Of Suitable Size. 7. Tripod Stand:- Should Be Of Standard Size Of Either Aluminium Or Good Quality Wooden Material. 8. Plumb Bob:- Standard Size ,Brass Metal. , Plastic Limit Apparatus Conforming To Is: 2720 (Part V) , Proctor Test Apparatus [Light And Heavy Compaction] Proctor Compaction Test (Modified And Standard) Bis: 2720-Part 7 1974. , Pycnometer For Determination Of Specific Gravity Of Sand And Fine Gravel. Consisting Of A Glass Jar Of 1 Kg Capacity, Complete With Brass Cone, Rubber Seal And Screwed Cap As Per Standard Is: 2386 (Part Iii). , Ring And Ball Apparatus Conform To Is:1205 (Electrically Operated) Ring And Ball Apparatusas Per Is: 1205, , Sand Replacement Apparatus [Large] As Per Is:2720 (Part Xxviii). , Sand Replacement Apparatus [Small] As Per Is:2720 (Part Xxviii). , Survey Umbrella , Shrinkage Limit Apparatus (Supplied With Requisite Quantity Of Mercury) The Apparatus Conforms To Is: 10077, And The Test Is Performed As Per Is: 2720 (Part Vi). The Set Consists Of: I) 75 Mm Square Prong Plate Made Of 3 Mm Thick Acrylic Sheet With Three Metal Prongs. Ii) Stainless Steel Shrinkage Dish 45 Mm In Dia, 15 Mm Deep. , Sieve Shaker, Motorised Having As Tardy Cast Iron Body, The Shaker Has An Inclined Sieve Table Which Can Accommodate A Max Of Seven Sieves Of 200 Mm Dia. An Adjustable Top Clamping Plate Is Provided To Hold The Sieves. The Table Has A Gyratory Motion In Addition To Up And Down Jolting Action. The Operating Gear Assembly Is Enclosed In An Oil Bath Fitted With Transparent Oil Level Indicating Window. Suitable For Operating On 220V, 50Hz, Single Phase Supply. Time Switch Adjustable From 0-60 Minutes; Lid And Receiver For 200 Mm Dia Sieves, Made Of Brass; Adopter For 300 Mm Dia Sieves; , Slump Test Apparatus With Tamping Rod And Base Plate Slump Test Apparatus As Per Is: 7320-1974. , Thickness Gauge As Per Is 2386 (Part I) : 1963 , Total Station Total Station.Telescope: Magnitication : 30X Or Better; Image : Erect; Angular MAsurement: Angular Accuracy : 5 Or Better: Least Count: 1 Or Better; Distance Measurement: Distance Range With Single Prism : 2.2 Kms Or Better (Under Normal Conditions) Distance Without Prism : 270 M Or More Laser Output In Prism Mode Class1 (Safe For Human Eye)Distance Accuracy In Prism Mode: 2Mm 2Ppmxd Or Better General:Display : Dual Face Alpha Numeric Keyboard (Identical Display)Compensator : Type: Dual Axis / Range: 3 Or More. Battery Rechargeable Battery (Operational Time Approx.12 Hrs Or More For Each Battery |2 Nos Battery To Be Supplied| Quick Charger. : Ino.Dust & Water Proof Protection : Ipss Or Better.Optical Plummet : 3X Or Better/Llaser Plummet Weight With Handle & Battery :5 Kgs Or More.Memory Management System With Multiple Data Interfaces As:Internal Memory : Approx 10,000 Points Or More. Plug In Memory Device : Usb Flash Memory. Accessories:Aluminium Telescopic Tripod. : Inosingle Prism Assembly Consisting Of: Inorange Pole, Prism, Target Plate, Spirit Bubble, Tripod All In Carrying Cases.Data Communication Sottware : Lnothe Minimum Tolloving Application Software Should Be Loaded In The Instrument.Topography, Resection, (Setting Out Of Co-Ordinates, Line, Arcs), Area Calculation, Etc. Catalogue Of The Quoted Model To Be Enclosed With The Bid (Without Which Bid Should Not Be Considered For Technical Evaluation, Physical Training To The Respective Institute After Successful Supply, Ater Sales Service Is Also Mandatory As When Required, , Turbidity Meter With Standard Solution Specification For Bench Top Turbidity Meter With Digital Display: Supply, Installation, Commissioning, Functional /Performance Testing, Demonstration, Training And Warrantee From Oem Or Their Authorized Dealer For Bench Top Turbidity Meter With Digital Large Full Colour Touch Screen Display Unit & Easy Data Export System Having Minimum Following Specification And Including Specified Numbers Of Standard Accessories. The Instrument Should Be Operable On 220 V Ac, 50 Hz. Specifications Range Turbidity Range (Ntu): 0 To 4000 Ntu (Nephelometric Turbidity Unit) Range Selection: Automatic Resolution: 0.001 Ntu, Accuracy: ± 2% Of Reading Plus 0.01 Ntu From 0 - 1000 Ntu, ±5% Of Reading From 1000 - 4000 Ntu Or Better Repeatability: ±1% Of Reading Or 0.01 Ntu Whichever Is Greater Light Source: Tungsten Filament Lamp Standard : Designed To Meet Epa 180.1 Response Time: < 15 Seconds Operation And Service Manual Should Be Included With The Main Instrument At The Time Of Supply. Instrument Should Have All The Standard Accessories Like Silicone Oil, Oiling Cloth, Filter Assembly, Sample Cells With Caps , Turbidity Standardization Solution Kit, Calibration Kit, Dust Cover At The Time Of Supply. Instrument Should Be Latest Model And It Should Not Be The Obsolete Model. , Universal Testing Machine (100T) Analogue, Universal Testing Machine As Per Is, Capacity 100T. , Vicat Apparatus Vicat Apparatus With Isi Certification Mark Is:5513 Fitted In Aluminium Box (Is-1727, 2541 (P.2), 2645, 4031) The Mould Is In The Form Of Frustum Of A Cone Having Internal Diameter At Lower And Upper End 70 And 60 Mm Respectively And A Height Of 40 ± 0.2 Mm. Needle For Initial Setting Time Determination: The Needle Is Circular/Rectangular In Cross-Section Having A Cross Sectional Area Of 1Mm².With Flat End.- 3Set Needle For Final Setting Time Determination: Having A Cross Sectional Area Of 1Mm² With Flat One End And A Collar At The Other End Having Dia Of 5 Mm And Needle Projects Beyond The Collar By 0.5 Mm – 3Set Polished Brass Plunger With A Projection At The Upper End For Insertion Into The Movable Rod With Flat Lower End Dia 10 Mm, 50 Mm Long- 3Set Sample Capacity : 400 Gms.( Ordinary Portland, Rapid Hardening Portland, Low Heat Portland)Front Scale Should Be Made With Brass (Can Be Measured From Top And Bottom ) Provided With Standard Bottom Glass Plate For Mould As Per Is Code , Bernoulli’S Apparatus The Self-Contained Experimental Set-Up Is To Be Provided With Water Recirculating Unit, Provided With A Sump Tank, Centrifugal Pump Etc. An Arrangement Is To Be Provided To Conduct The Experiment On Different Flow Rates. Flow Rate Of Water Is Measured With The Help Of Measuring Tank And Stopwatch. Technical Details: • Test Section: Material Acrylic, • Piezometer Tubes: Material P.U. Tubes (7 Nos), • Water Circulation: 0.5. H.P. Pump, • Flow Measurement: Using Measuring Tank With Piezometer, Capacity 25Lts. • Sump Tank: Capacity 70 Lts., • Intel Tank: Capacity 20 Lts., • Stop Watch: Electronics, • Control Panel Comprises Of Standard Make On/Off Switch, Mains Indicator, Etc. • Tanks Will Be Made Of 2 Mm Thick Stainless Steel Sheet. • The Inside Surface Of The Tank And All Ms Fittings And Components Should Be Provided With Corrosion Resistant Paint. • The Whole Setup Should Be Well Designed And Arranged In A Good Quality Painted Structure. 2 Hard Copies Of Operation Manual Are To Be Supplied Along With The Unit And Installation And Demonstration Are To Be Given Within One Month Of Supply Of Set - Up. , Combined Venturimeter And Orificemeter Apparatus The Apparatus Should Consist Of 2 Pipe Line Emerging Out From A Common Manifold. One Pipeline Contains A Venturimeter, Second Contains An Orifice Meter. The Pressure Taping From The Venturimeter And Orifice-Meter Are Taken To Differential Manometer To Measure Pressure Difference. The Venturimeter And Orificemeter Are Connected In Parallel And Any One Of Them Can Be Put In Operation By Operating Valves Provided At The Upstream And Downstream. The Flow Can Also Be Regulated By Theses Valves. The Set-Up Is To Be A Self-Contained Water Re-Circulating Unit, Provided With A Sump Tank, Centrifugal Pump Etc. Flow Control Valve And By-Pass Valve Are Fitted In Water Line To Conduct The Experiment On Different Flow Rates. Flow Rate Of Water Is Measured With The Help Of Measuring Tank And Stopwatch. Technical Details: • Venturimeter: Material Acrylic/Brass Compatible To 1” Diameter Pipe. • Orificemeter: Material Acrylic/Brass Compatible To 1” Diameter Pipe. • Water Circulation: 0.5. H.P. Pump (Standard Make). • Flow Measurement: Using Measuring Tank, Capacity 40 Ltrs. • Sump Tank: Capacity 60 Ltrs. • Stop Watch: Electronics. • Control Panel Comprises Of: Standard Make On/Off Switch Mains Indicator, Etc. • Tanks Will Be Made Of 2 Mm Thick Stainless Steel Sheet. The Inside Surfaces Of The Tank All Ms Fittings And Components Should Be Provided With Corrosion Resistant Paint. • The Whole Setup Should Be Well Designed And Arranged In A Good Quality Painted Structure. 2 Hard Copies Of Operation Manual Are To Be Supplied Along With The Unit And Installation And Demonstration Are To Be Given Within One Month Of Supply Of Set - Up. , Water Distillation Apparatus The Still Is An Essential Part Of Equipment In Modern Material Testing Laboratories. In Operation The Water Is Heated Gently And Converted To Steam By Keeping It Boiling At A Slow Rate. The Steam Is Condensed In An In-Built Condenser And The Distillate Collected In A Receiver. This Is Free From All Impurities And Gases. Cooling Water Consumption 60 Liter/Hr Biological Activity Pyrogen Free Ph 6 -7 Conductivity S/Cm <3 × 10-6 Distillate Temperature 65 - 75?C Copper, Brass, Bronze And Tin Are Used In The Fabrication Of The Stills. The Surfaces Coming In Contact With Water Are Heavily Tinned Which Prevents Metallic Contamination. A Water Inlet Valve Is A Part Of The Still For Connecting To A Tap. An Overflow Is Also Provided To Maintain The Water At Proper Level. The Still Has4 Litre/Hour Distillation Capacity, Suitable For Operation On 220 V, 50 Hz, Single Phase Supply. , Kvl , Kcl Trainer Kit With Adequate Voltmeter Ammeter And Multi Meter , Rlc Resonance Trainer Kit , Analog Micro-Ammeter(0-1000?A) (Ac) , Analog Milli-Ampere(0-1000Ma) (Ac) , Digital & Analog Bread Board Trainer , 8085 Trainer Kit 16 X 4 Line Lcd Display & 101 Pc Key Board. With Power Supply & Rs232c Serial Link Cable, Pc Up/Dn Load Sw, Cross Assembler Etc. , 8255 Study Cum Logic Control Card , 8 Bit Adc & Dac , 8051 Trainer Kit 16X4 Line Lcd Display & 101 Pc Key Board With Power Supply & Rs 232X Serial Link Cable, Pc Up/Dn Load Sw, Cross Assembler Etc. , 8051 Development Board , Stepper Motor & 12V Dc Motor Control With Motor Mounted & Direction Control , 8 Bit Adc & Dac , Lcd Interface Module , Relay Interface Module , Digital Ttl Logic Gate Trainer Kit , Digital Cmos Logic Gate Trainer Kit , Adder/Subtractor Trainer Kit , 4 Bit Multiplexer & De-Multiplexer Trainer Kit , Flip Flop Trainer Kit , 4Bit Shift Register Trainer Kit , Decade Counter Decoder Driver & 7 Segment Display (With 1 Hz Squarer Generator) Trainer Kit , Programmable Counter Using 7490 Ic Trainer Kit , Digital To Analog And Analog To Digital Converter Trainer Kit , Bcd To 7 Segment Decoder Trainer , Ic 555 Trainer Kit , Linear Potentiometer (With Scaling) , Rotary Potentiometer (With Scaling) , C Type Bourdon Tube Pressure Gauge (Spec: 0- 100Psi, Accuracy 1%) , Dead Weight Tester With Bourdon Tube Pressure Gauge , Dead Weight Tester With Bourdon Tube Pressure Switch , Strain Gauge Load Cell , Lvdt Trainer Kit , Hall Sensor Trainer Kit , Piezoelectric Transducer Trainer Kit , Stroboscope , Rtd , Thermocouple , Thermistor , Pyrometer , Manual Installation Of Flow Line Along With The Different Flow Measuring Instruments (Orifice, Venturi, Rotameter, Magnetic Flow Meter, D/P Transmitter) , Conductivity Gage For Level Measurement , Capacitive Gagefor Level Measurement , Gauge Glassfor Level Measurement , Float Typefor Level Measurement , Displacer Typefor Level Measurement , Control Valve , Temperature Control Loop With Using On Off Controller With Temperature Sensor , Complete Set Up Of Process Control Unit For Level & Flow Using Analog Dp Transmitter & Computer Interface With Pid Control Full Set Without Pc. , Complete Set Up For Single Loop Flow Control Unit Using Mass Flow Meter With Control Valve. , Pid Controller Master Unit Containing Analog Pid As Well As Pc Based Pid With Computer Interface Adaptor & Self Extracting Pid S/W On Cd With Process Simulator Panel. , Pcb Stencil Printer , Dc Shunt Motor: ½ Hp, 220V,1500 Rpm (Gee Make)Dc Starter : ½ Hp , 220V, 3-Point Starter, Panel Mount Type, Ammeter : 2A, Mc Type, Panel Mount, 96 Sq. Mm (Ae Make), Voltmeter: 300V, Mc Type,Panel Mount, 96 Sq. Mm (Ae Make), Ammeter: 1A, Mc Type, Panel Mount, 96 Sq. Mm (Ae Make), Rpm Meter: Digital, Panel Mount With Proximity Sensor (Select Make), Rheostat :( 0-50O, 5A, And 0-500O, 1.5A) Screw Motion Type, Cont. Variable, Potential Divider: 500O, 2A Screw Motion Type, Cont. Variac-1No. Motor Are Fitted On Ms Channel Base. All Meters, Starter- Are Mount On Self Stand Bakelite Panel Board. All The Terminals Of The Motors, Meters, Starter, Mcb Etc. Brought Out On The Panel For Flexible Connection With Connecting Patch Cords. , Transformer : 1 Kva, 230V / 115V, 50 Hz Variac : Single Phase, 10A, Input : 230V, Output : 0-270V, 5A, Voltmeter: 300V, Mi Type, Class : 1.5, 96 Sq. Mm. (Ae Make), 150V, Mi Type, Class : 1.5, 96 Sq. Mm. (Ae Make), 50V, Mi Type, Class : 1.5, 96 Sq. Mm. (Ae Make), Ammeter : 0-5A, Mi Type, Class : 1.5, 96 Sq. Mm. (Ae Make), 0-10A, Mi Type, Class : 1.5, 96 Sq. Mm. (Ae Make) : 0-1A, Mi Type, Class : 1.5, 96 Sq. Mm. (Ae Make), Wattmeter: 300V / 5A, Digital, Pf : 0.2 To 1.0, Class : 1, 96 Mm X 45 Mm (Schneider).All Instruments/Equipments Mount On Self Stand Table Top Type Bakelite Panel Board.All Terminals Of The Meters, Power Source Etc. Brought Out On The Panel Board With Required Mcb, Indicators, Terminals Etc. With Connecting Patch Cords , Variable Dc Source : 0-24V, 0-500Ma, Continuous Variable Dc Source Dc Voltmeter: 0-50V, Mc Type, Class : 1.0, 96 Sq. Mm. Ammeter :0-1A, Mc Type, Class : 1.0 96 Sq. Mm. Load : 0-500Ma, 24V Resistive Load, All Instruments/Equipments Mount On Self Stand Table Top Type Bakelite Panel Board. All Terminals Of The Meters, Power Source Etc. Brought Out On The Panel Board With Required Mcb, Indicators, Terminals Etc. With Connecting Patch Cords , Kelvin Double Bridge:Range Of Measurement: 0.1? – 0.92?, One Digital Galvanometer Provided To Indicate The Balance Conditions. Required Patch Chords Are Provided. Input Voltage :15V Dc Output Voltage :5V Ac, Output Current :1 Amps, Kelvin’S Double Bridge, Patch Cards, 1A Power Supply Adaptor, Manual , Insulation Tester (Hand Driven Generator Type), Rated Resistance: 0-2000 Mohm, Rated Voltage: 500 Volts, Scale Length: 90Mm (Approx.), Rotation Speed: 160 Or More R.P.M , Fluorescent Lamp Set Up With Copper Ballast, Starter, Capacitor Etc. (Philips) Variac : Input :230V Ac, Output : 0-250V, 2A, Panel Mount Type (Penta), Wattmeter : Digital Panel Type, 0-300V / 0-2A (Schneider Make), Voltmeter : Digital Panel Type. 0-300V Ac (Select Make) – 3 Nos. Ammeter: Digital Panel Type. 0-2A Ac (Select Make),All Mount On A Self Stand Bakelite Panel Board. All The Terminals Of Each Inst. Brought Out On The Panel.Connecting Patch Cords, Dp Mcb, Indicator. , Wien Bridge: Supply:- ±12V D.C. At 100Ma, Ic Regulated Power Supply Internally Connected1khz Sine Wave Oscillator Audio Amplifier And Speaker For Null Detection Three Decade Resistances, Single Dial In Steps Of 100 Ohm, Total 1K Each,Two Dials Of 10 Ohm & 100 Ohm, Total 1100 Ohms To Form Arms Of Bridge Decade Standard Capacitance, Selectable By A Band Switch To Form The One Arm Of The Bridge Unknown Capacitor And Adequate No. Of Other Electronic Components Mains On/Off Switch, Fuse And Jewel Light The Unit Is Operative On 230V ±10% At 50Hz A.C. Mains Adequate No. Of Patch Cords Stackable From Rear Both Ends 4Mm Spring Loaded Plug Length ½ Metre Good Quality, Reliable Terminal/Sockets At Appropriate Places On Panel For Connections/Observation Of Waveforms , Maxwells Inductance Bridge: Four Arms Are Provided With Suitable Connectors, 1 Khz Oscillator Of Fixed Amplitude To Feed The Input To The Bridge, Measurement Range 15Mh – 200Mh, Connector Facility Given To View The Output Of The Bridge Externally By Cro, Patch Chords, Input Voltage 15V Dc, Output Frequency 1Khz, Output Voltage 2V Ac, Output Current 0.5 Amps, Patch Cords, 1A Power Supply Adaptor. , Schering Bridge: Built In Dc Power Supplies Fixed. Operated On Mains Power 230V, 50Hz +10%, Sine Wave Generator: 0-1Khz Sine Wave Oscillator, Null Detector: Speaker, Componentsmounted On The Panels : Arm, R1 Four Decades Of Resistance 1 Ohm To 10K Ohm Through Rotary Switch. Arm, R2 Six Different Values Of Resistance Through Rotary Switch. Arm, Cx Three Different Values Of Unknown Capacitance Through Rotary Switch.One Arm Asfixed Capacitor. , Scr- Trainer Kit: Variable Dc Source: 0 ~ ±250V, 0.75A, Variable Dc Source: 0 ~ ±10V, 100Ma, Digital Voltmeter: 0 ~ ±500V (Peak/Instant), Digital Voltmeter: 0 ~ ±20V Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) Digital Ammeter: 0 ~ ±20Ma, Lamp/Resistance Load, Test Points , Diac And Triac-Trainer Kit: Variable Dc : 0 ~ ±250V, 0.75A, Variable Dc : 0 ~ ±10V, 100Ma, Digital Voltmeter: 0 ~ ±500V (Peak/Instant), Digital Voltmeter: 0 ~ ±20V Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) Digital Ammeter: 0 ~ ±20Ma, Lamp/Resistance Load, Test Points , R, Rc And Ujt Triggering Circuits Of Scr-Trainer Kit: Ac Source: 24V, 1A, Lamp/Resistance Load, Test Points Digital Voltmeter: 0 ~ ±230V Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) , Single-Phase Halfcontrolled And Full Controlled Rectifierr And Series R-L Load - Trainer Kit: Zero Crossing, Ramp Generator, Comparator, Pulse Train Gating, Pulse Transformer Firing, Ac Source: 24V, 1A R/R-L Load, Test Points,Digital Voltmeter: 0 ~ ±230V, Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) , Study Of Step-Up And Step-Down Chopper (Effect Of Variation Of Duty Cycle On Output Voltage In R And Series R-L Load.) - Trainer Kit: Microprocessor Based Pwm Generator Carrier Frequency – 1Khz, 5Khz, 20Khz Pwm Variable From 0 ~ 100% In 1024 Steps, Rectifier, Dc Source: 0 ~ 24V, 1A R/R-L Load, Test Points , Study Of Single-Phase Half Bridge And Full Bridge Square-Wave Inverter In R And Series R-L Load. - Trainer Kit: Zero Crossing, Ramp Generator, Comparator, Pulse Train Gating Pulse Transformer Firing,Ac Source: 24V, 1A, R/R-L Load, Freewheeling Diode,Test Points, Digital Voltmeter: 0 ~ ±230V. Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) ,Printed Board, Fuse,Patch Cord , Study Of Single-Phase Ac Voltage Regulator: Ramp Generator, Pulse Train Gating Pulse Transformer Firing, Ac Source: 24V, 1A, R/R-L Load, Freewheeling Diode, Test Points, Digital Voltmeter: 0 ~ ±230V, Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable), Universal Motor:- 1/6Hp With Digital Tachometer For Speed Measurement. Printed Board, Fuse, Patch Cord , Speed Control Of Dc Motor Using Chopper - Trainer Kit: All Test Points Are User Connectable Dc Motor 220V-2 A-1/4 Hp-1500Rpm With Loading Arrangement, Contact Type Digital Tachometer With Starter And Dc Power Supply For Chopper Configuration, Panel Mount Ammeter And Voltmeter, Full Converter Operation For Different Firing Angles, Provision For Connecting Freewheeling Diode, On/Off Switch, Thick Patch Cords For Power Circuit, Indicator, Field Circuit Indicator, Printed Board, Fuse, 4 Quad, Duty Cycles 20-70%, Arm Feed Back Symmetrical Angle Control 250 Vdc Built In Supply, I/P-230 V Ac Mains Rectified To 300 Vdc, Duty Cycle- 20 To 70 %. At 50 Hz O/P Voltage- 25 V To 250V , Diac And Triac-Trainer Kit: Variable Dc : 0 ~ ±250V, 0.75A, Variable Dc : 0 ~ ±10V, 100Ma, Digital Voltmeter: 0 ~ ±500V (Peak/Instant), Digital Voltmeter: 0 ~ ±20V Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) Digital Ammeter: 0 ~ ±20Ma, Lamp/Resistance Load, Test Points , R, Rc And Ujt Triggering Circuits Of Scr-Trainer Kit: Ac Source: 24V, 1A, Lamp/Resistance Load, Test Points Digital Voltmeter: 0 ~ ±230V Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) , Single-Phase Halfcontrolled And Full Controlled Rectifierr And Series R-L Load - Trainer Kit: Zero Crossing, Ramp Generator, Comparator, Pulse Train Gating, Pulse Transformer Firing, Ac Source: 24V, 1A R/R-L Load, Test Points,Digital Voltmeter: 0 ~ ±230V, Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) , Study Of Step-Up And Step-Down Chopper (Effect Of Variation Of Duty Cycle On Output Voltage In R And Series R-L Load.) - Trainer Kit: Microprocessor Based Pwm Generator Carrier Frequency – 1Khz, 5Khz, 20Khz Pwm Variable From 0 ~ 100% In 1024 Steps, Rectifier, Dc Source: 0 ~ 24V, 1A R/R-L Load, Test Points , Study Of Single-Phase Half Bridge And Full Bridge Square-Wave Inverter In R And Series R-L Load. - Trainer Kit: Zero Crossing, Ramp Generator, Comparator, Pulse Train Gating Pulse Transformer Firing,Ac Source: 24V, 1A, R/R-L Load, Freewheeling Diode,Test Points, Digital Voltmeter: 0 ~ ±230V. Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable) ,Printed Board, Fuse,Patch Cord , Study Of Single-Phase Ac Voltage Regulator: Ramp Generator, Pulse Train Gating Pulse Transformer Firing, Ac Source: 24V, 1A, R/R-L Load, Freewheeling Diode, Test Points, Digital Voltmeter: 0 ~ ±230V, Digital Ammeter: 0 ~ ±500?A/500Ma (Selectable), Universal Motor:- 1/6Hp With Digital Tachometer For Speed Measurement. Printed Board, Fuse, Patch Cord , Speed Control Of Dc Motor Using Chopper - Trainer Kit: All Test Points Are User Connectable Dc Motor 220V-2 A-1/4 Hp-1500Rpm With Loading Arrangement, Contact Type Digital Tachometer With Starter And Dc Power Supply For Chopper Configuration, Panel Mount Ammeter And Voltmeter, Full Converter Operation For Different Firing Angles, Provision For Connecting Freewheeling Diode, On/Off Switch, Thick Patch Cords For Power Circuit, Indicator, Field Circuit Indicator, Printed Board, Fuse, 4 Quad, Duty Cycles 20-70%, Arm Feed Back Symmetrical Angle Control 250 Vdc Built In Supply, I/P-230 V Ac Mains Rectified To 300 Vdc, Duty Cycle- 20 To 70 %. At 50 Hz O/P Voltage- 25 V To 250V , Simple Screw Jack Appratus , Worm And Worm Wheel Appratus , Double Purchase Crab Winch Appratus , Horizontal And Inclined Plane Friction Slide Apparatus , Haematite Ore (1 Kg) , Copper Pyrites (1 Kg) , Powdered Coal Sample (1 Kg) , Tlc Uv Cabinet , Hot Plate With Magnetic Stirrer , Magnetic Stirrer , Digital Muffle Furnace (220-230V, 900°C) , Sample Cells (Round Glass, 10 Ml) , Sample Cells (Square Glass, 10 Ml) , Chloroscope , Air Compressor , Digestion Vessels (12 Pieces Box) , Block Heater , Ampule Sealer , Borosilicate Culture Tubes (16Mm×100Mm×150Mm) With Tfe Lined-Screw Caps , Parafilm Tape , Determine The Permeability Of Magnetic Materials By Plotting Its B-H Curve. Trainer Operated On 230V With 10% Variation, Sufficient Number Of Patch Cords, With Computer Lead, 12 X 8 With Shock-Proof Ply Box, Three Different Values Of Capacitors Are To Be Given On Board. • One Variable Potentiometer • Different Circuit Diagram Is Printed On Board. • Step Down Teansformer With Demonstration Transformer With 2 Secondary Coils And One Primary Coil. • Output Through Bnc Connectors And Bnc Lead Are To Be Provided For Output To Cro. • Components Mounted On The Front Panel. , Set Up For Measurement Of Voltage Current And Power Variable Ac Supply: 0-230V, 0-5A, Continuous Variable Ac Supply, Ac Voltmeter: 0-300V, Mi Type, Class : 1.5,Ammeter : 0-5A, Mi Type, Class : 1.0 96 Sq. Mm. (Ae Make), Wattmeter:230V,5A, 1000Watt, Analogtype, Panel Mount, Load : 0-5A, 220V Resistive Load, Step Variable, All Instruments/Equipments Mount On Self Stand Table Top Type Bakelite Panel Board. All Terminals Of The Meters, Power Source Etc. Brought Out On The Panel Board With Required Mcb, Indicators, Terminals Etc. With Connecting Patch Cords, Operating/Instruction Manuals. , Set Up For Visualization Of Phase Difference Between Voltage And Current In Series R-L And Series R-C Circuit Analog Meters: Ammeter 20Ma Ac.Voltmeter 20V Ac. Components Are Mounted On The Panels Are: 3 Nos. Of Resistors Selected By Rotary Switch. 3 Nos. Of Capacitors Selected By Rotary Switch. 3 Nos. Of Inductors Selected By Rotary Switch. Dso- 2Channel, 50Mhz Table Top-1No. , Measure Voltage, Current, Power, P;Ower Factor In A R-L Series Circuit Resistance: 0 - 500O / 2A, Step Variable, Inductance: 0-200Mh / 2 Amps, Step Variable, Voltmeter: 0-300V Ac, Digital Panel Type– 4 Nos.Variac: 0-250 Volts / 4 Amps, Panel Mount Type, Single Phase, Ammeter ; Digital Panel Type. 0-2A Ac Wattmeter:- 230V/5A, 1000Watt Digital Panel Mount, All The Meters Mount On Bakelite Panel Board With Toggle Switches, Terminals, Connecting Wires, Rotary Switches, Sockets, Operating Manual Etc. , Identify Different Parts Of A Single Phase Transformer, Ac And Dc Motor. Dc Machine-0.5Hp, 220 Volts, 1500 Rpm, Compound Wound Dc Machine. Parts I.E. Armature, Shunt Field, Series Field, Commutator, Carbon Brass, Carbon Holder, Carbon Rocker, Ball Bearing, Bearing Lubricant, Bearing Guards, Cooling Fan Etc. Are Properly Paints And Marking For Easy Understanding. Three Phase Induction Machine (Squirrel Cage)- 1 Hp Capacity, 415 Volts, 1460 Rpm, Three- Phase Sq. Cage Induction Motor. All Parts I.E. Stator Winding, Sq. Cage Rotor, Cooling Fan Are Properly Paints And Marking For Easy Understanding. (Each Set) Transformer (1-Ph) : 1 Kva, Primary : 220 Volts, Secondary : 110 Volts, Single Phase, 50 Hz, An Cooling– 1 No. , Determine The Transformartion Ratio Of A Single Phase Transformer And Measure No Load And Full Load Current Transformer : 1 Kva, Primary : 220 Volts, Secondary : 110 Volts, Single Phase, 50 Hz, Normally Air Cooled, Variac:Single Phase, Panel Mount Type, 0-250 Volts, 10 Amps, Wattmeter : 0-300 Volts / 0-5 Amps, Single Phase, Digital Type (Schneider), Voltmeter: 0-300 Volts, Ac, Panel Mount, Digital Type (Select)– 2 Nos. Ammeter: 0-1 Amps, Ac, Panel Mount, Digital Type (Select) Ammeter: 0-10 Amps, Ac, Panel Mount, Digital Type (Select) – 2 Nos. Load : 0-5A, 220V Resistive Load, Step Variable,– 1Set. All Meters Are Mount On A Self Stand Bakelite Panel Board. All The Terminals Of The Meters Etc. Brought Out On The Panel For Flexible Connection. With Connecting Patch Chords, Operating Manuals Etc. , Identification Of Different Active And Passive Lements In A Given Circuit Different Type Of Resistors, Capacitors, Diodes, Zener Diodes, Transistors (Npn & Pnp Type), Transformers, Inductors,Regulator, Op-Amp Ic, Fet, Mosfet Etc. All Above Mentioned Components Fitted On Acrylic Sheet With Proper Marking And Symbol. , Familiarization With Multimeter To Measure The Value Of Given Resistor And To Confirm With Clour Code Digital Multimeter Meeting Iec1010standard. Ce Resistance:- Different Value Resistance (Cfr And Mfr Type)-1No Each. With Colour Code.Inductor :- Different Value Inductor -1No Each. With Colour Code. Capacitor :- Different Value Capacitor -1No Each. With Colour Code. , Use Of Lcr-Q Meter To Measure The Value Of A Given Capacitor And Inductor • Dual Backlit Lcd Display. Auto Lcr Smart Check And Measurement. Series/Parallel Modes Are Selectable. • Ls/Lp/Cs/Cp With D/Q/ T/Esr Parameters. Support Dcr Mode 200.00O~200.0M?. Five Different Test Frequency Are Available: 100/120/1K/10K/100K Hz. • Test Ac Signal Level: 0.6Mvrms Typ. Test Range: (Ex. F=1Khz). L: 200.00 ?H ~ 2000.0 H. C: 2000.0 Pf ~ 2.000 Mf. R: 20.000 O ~ 200.0 M?. • Multi-Level Battery Voltage Detector Support. Back-Light & Buzzer Sound Driver. • Parameters Displayed: Dc Resistance, Serial Inductance, Parallel Inductance, Serial Capacitance, Parallel Capacitance, Serial Resistance, Parallel Resistance, Phase Angle, Equivalence Serial Resistance, Dissipation Factor, Qqquality Factor. Capacitor:- 2.5Mfd, 2.25Mfd/400Volt-1No. Each. Inductor:- 10Mh, 4.7Mh. -1No. Each. , Test The Pn Junction Diode Using Digital Multimeter And Finding Out Their V-I Characteristics In Forward Bias. Ammeter:15Ma/150Ua Dc Panel Mount-1No., Voltmeter: 3V/30V Dc Panel Mount-1No. Power Supply: Dc Supply Ic Regulated 0-3/30V Dc, 150Ma-1No. Components Are Fixed On The Kit. Silicon Diode _1N4007)-1No., Germanium Diode-1No.,Two Different Voltage Zener Diode-1No.,Voltage Control Through Potentiometer-1No. Digital Multimeter Meeting Iec1010standard. Ce , Identify The Terminals Of A Transistor Using Digital Multimeter And Calculate Gain In Ce Mode Transistor. Transistor- Pnp And Npn Type-1No. Each., Ammeter:- 15Ma/150Ua Dc Panel Mount-1No., Voltmeter:- 3V/30V Dc Panel Mount-1No. Power Supply:- Dc Supply Ic Regulated 0-3/30V Dc, 150Ma-1No., Digital Multimeter , Realization Of Truth-Table Og Different Logic Gates(Ttl) And Verification Of De-Morgans Theorem . Fixed Dc Power Supply Of 5 V /250 M A. . One Output Indicator For Taken The Observations And Two Toggle Input Selectable Switches For Selects 0 And 1 Logics. . Or Gate, Not Gate, And Gate, I C’ S Are Mounted On The Front Panel. . User Manual And Connecting Leads Are Also Provided With This Instruments.
Contract Date: Dec 30, 2024 Contract Value : ₹ 51.88 Lakh
Government Departments No of Bidders 36
West Bengal View Result →
47.
Housing Urban and Rular Development #7064622 AOC
Supply, Installation, Testing and Commissioning of LAN, Voice, CCTV Surveillance System, Audio-Visual System, Bio-Metric Attendance system and Ancillary Works for Directorate of Drugs Control, Kolkata (Headquarter) in the Newly Proposed Building(4th floor to 9 th floor of SHTO), Moulali, Kolkata - 700014. [Job No: KIT/OW/287 of 24-25]- 1 SITC & Laying of PVC conduits/ Casing (ISI marked) / floor channel laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Make: Precision, Presto Plast, Supreme, Quality : ISI Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 2 Supply & Laying of Hot deep galvanized steel MS- 10790(0) perforated Cable Tray as per IS 4759,2629, 2633 (150 mm X 25mm X 1.6mm) with all OEM Equal T/Horizontal Bend/Crossovers/Reducers/Coupler Plates and ceilling suspension/Wall support system as may be required at site, Make: Custom Warranty: 03 (Three) onsite comprehensive OEM warranty with parts and service. 3 Cutting channel & conceal of 43 mm x 43 mm size on masonry wall incl. Supplyheavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire with mending good damages to building works with DWC HDPE pipe ISI marked along with all accessories (Dia: 25mm (OD-25mm & ID-21mm)) or PVC conduits(ISI marked) 25 mm dia 3 mm thick polythene pipe without earth continuity wire as per direction of EIC 4 SITC of Layer 2, PoE enabled, with PD: minimum 370 Watt (should have minimum 15.4 Watt per Port), fully/ Smartmanaged, 1RU, GE Switch to be operated on 200-240VAC, 50 Hz Supply, with perpetual license of OEM, having minimum technical specification: a) 24 x 10/100/1000Base-T Mbps PoE+ enabled host ports (Minimum); b) 4 x 1 GE SFP port; c) Forwarding performance/stacking bandwidth/ backplane speed (Minimum) of 41.5 Mpps; d) Fanless operation with operating temperature up to 50°C; e) DRAM and Flash RAM as per OEM; f) Software support with IPv4 routing (542 routes), multicast routing (IGMP) including necessary software license; g) Minimum switching capacity of 56Gbps; h) Number of VLAN Supported: 64 (Minimum).; i) Total number of MAC Address: 8,000 (Minimum); j) Minimum Security: User privilege management and password protection, DoS attack defense, ARP attack defense, and ICMP attack defense, Binding of the IP address, MAC address, interface, and VLAN, Port isolation, port security, and sticky MAC, MFF, Blackhole MAC address entries, Limit on the number of learned MAC addresses, 802.1x authentication and limit on the number of users on an interface, AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC, SSH v2.0, Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist; Access Security: DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security; k) Others: Applicable standards: IEEE 802.1p: CoS prioritization , IEEE 802.1Q: VLAN tagging, IEEE 802.1X: Port Access Control, IEEE 802.3: 10BASE-T, IEEE 802.3u: 100BASE-T,IEEE 802.3ab: 1000BASE-T, IEEE 802.3z: 1000BASE-X,IEEE 802.3af: Power over Ethernet, IEEE 802.3at: Power over Ethernet Plus, IEEE 802.3x: Pause Frames/Flow Control, IEEE 802.1D: Spanning Tree Protocol, IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP), IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol, IEEE 802.3ad: Link Aggregation Control Protocol; l) REGULATORY: RoHS, WEEE, IEC 61000-4-2:2008, CISPR Class, ICES-003 Class A,UL,CSA 22.2,FCC,EN 300 386, CCC, ICES -003, CB. The OEM should have 24x7 TAC support center with India toll free number reflected in official website. Make: Zyxel, Extreme, Aruba, CISCO, Juniper, Netgear Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 5 SITC of Network Security Firewall having minimum technical specification of Hardware & Software: IPS Throughput:1.4 Gbps or higher; NGFW Throughput :1.0 Gbps or higher; Threat Protection Throughput: 900 Mbps or higher; Firewall Throughput: 10.5 Mpps or higher; IPsec VPN Throughput: 11.5 Gbps or higher; Firewall Latency: 3.23 μs or better; Concurrent Sessions (TCP): 1.5 Million; New Sessions/Second (TCP): 45,000; Firewall Policies: 5,000; Application Control Throughput (HTTP 64K): 1.8 Gbps; Gateway-to-Gateway IPsec VPN Tunnels: 2,000; Client-to-Gateway IPsec VPN Tunnels: 50,000; SSL-VPN Throughput: 4.5 Gbps; Concurrent SSL-VPN Users:5,000; SSL Inspection Throughput:4.8 Gbps; SSL Inspection CPS: 4,000; SSL Inspection Concurrent Session: 300,000; Application Control Throughput: 12 Gbps; CAPWAP Throughput: 14.8 Gbps; Virtual Domains (Default/Max): 10/10; Maximum Number of Switches: 72 Maximum Number of APs (Total / Tunnel): 512 / 256; Maximum Number of Tokens: 5,000; High Availability Configurations: Active-Active, Active-Passive, Clustering; Interfaces and Modules: 1x CPUs, 2 x physical cores, 4 virtual cores; 6x 10/100/1000Base-T RJ45 port card; ; IPv6 Ready: Yes; Compliance: FCC Part 15 Class A, RCM, VCCI, CE, UL/cUL, CB; Certifications: ICSA Labs: Firewall, IPsec, IPS, Antivirus, SSL-VPN; USGv6/IPv6; Details of the Firewall Policies for the Firewall provided with the License: UTM Protection (24x7 Care plus Application Control, with Security Gateway Feature of Firewall, Identity Awareness, IPsec VPN, Advanced Networking & Clustering, Mobile Access, IPS, Application Control, Content Awareness, URL Filtering, Antivirus, Anti-Spam, Anti-Bot, SandBlast Threat Emulation, SandBlast Threat Extraction, Network Policy Management, Logging & Status, Web Filtering and Antispam and Sandbox Cloud) including all necessary accessories as per site requrement. Make: Sophos,QuickHeal,Gajshield,Fortigate, Watchgurd Licence: 03(Three) Years Advanced Bundle (24x7 Care plus Application Control, with Security Gateway Feature of Firewall, Identity Awareness, IPsec VPN, Advanced Networking & Clustering, Mobile Access, IPS, Application Control, Content Awareness, URL Filtering, Antivirus, Anti-Spam, Anti-Bot, SandBlast Threat Emulation, SandBlast Threat Extraction, Network Policy Management, Logging & Status, Web Filtering and Antispam and Sandbox Cloud) subscription with Comprehensive on-site support for 03(Three) Years. 6 SITC of Networking Horizontal Armoured Cable, 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation,polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C, Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 7 SITC of MULTI TUBE Single SHEATHED STEEL ARMOURED OFC cable, 6F, 6T, 50/125 Micron, OM3. Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 8 SITC of I/O port adpater RJ45 with GI box and Single face cover plate etc Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 9 SITC of CAT 6 U/UTP 24 Port Modular fully loaded patch Panel ISO 11801 AMD 1 Class EA TIA-568-C.2 Cat 6 ANSI/EIA-1069-A IEC 60603-7 Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 10 SITC of PATCH CHORD Category 6 4-Pair, U/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 1 MTR LENGTH, Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 11 SITC of PATCH CHORD Category 6 4-Pair, U/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 2 MTR LENGTH, Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 12 SITC of Multi Mode LIU, 12F, 1U Drawer shelf, Fully loaded with SC/LC,OM3 Pigtails,Adapters,Splice Trays, Fiber Management Rings and Splice Slvees. Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 13 SITC of Multi Mode LIU, 12F, 1U Drawer shelf, Fully loaded with SC/LC,OM3 Pigtails,Adapters,Splice Trays, Fiber Management Rings and Splice Slvees. Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 14 SITC of 10Gb Duplex Multi mode 50/125 OM3 LSZH Armoured Fiber Patch Cable, SC-SC/ SC-LC/ LC-LC as per sites requirements - 3 MTR Make:R&M, Legrand, Tyco, Comscope, Molex, derwiser. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 15 SITC of 1G Base SR Multi Mode modular and field replaceable SFP module of same rating of Ethernet Switch & OEM Make: Zyxel, Netgear, Aruba, Extreme, Juniper, Cisco Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. 16 SITC of WALL Mounted Cross Connect Equipments 9 U x 600 x 500 Rack - Front Glass Door with Cam Lock - Fan Unit of 90CFM / 230 Volt - 1no - 6 Way 5A PDU, along with input Cable - 1no . Hardware packet of 20-3 Nos., Make: Tata, Vertiv, Netrack, Valrack, Rittal, APW, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 17 SITC of Floor Mounted Cross Connect Equipments 32U x 1000 x 500 Rack - Front Glass Door with Cam Lock - Fan Unit of 360CFM(Min) / 230 Volt - 4no - 6; Way 5A PDU, along with input Cable - 2no - H/w Packet of 20 - 8nos - 1U PVC Cable Manager - 6nos. Make: Tata, Vertiv, Netrack, Valrack, Rittal, APW, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 18 SITC of:EPBAX system with redundant MCU and line: 24 P&T(Minimum) No; Extention: 100Analog Extension, 8Digital Extension Expandable up to 240,Extensions with all necessary power accessories; Other Faetures: Hotline, Auto Call Back, Automatic Call, Auto Redial, Call Conference, Direct Inward Dialing, External Call Forwarding, Executive/ Secretary etc. Make : Matrix, Progility, NEC Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 19 SITC of: 5 pair armoured Telephone Cable {0.5mm.Dia (Minimum)} Make: Delton, Netco, Belden Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 20 SITC of: 20 pair armoured Telephone Cable {0.5mm.Dia (Minimum)} Make: Delton, Netco, Belden Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 21 SITC of: 20 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete with all accessories. 22 SITC of: 50 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete with all accessories. 23 SITC of: 100 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete with all accessories. 24 SITC of I/O port adpater RJ11 with GI box and Single face cover plate etc Make: Legrand, R & M, Tyco, Commscope Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 25 SITC of CLI Analog Telephone Set Make : Matrix, Panasonic, Progility, NEC, Bettel Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 26 SITC of Non - CLI Analog Telephone Set Make : Matrix, Panasonic, Progility, NEC, Bettel Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 27 SITC of Digital Telephone Set Make : Matrix, Panasonic, Progility, NEC, Bettel Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 28 SITC of IP 4MP IR Dome Camera (complete with perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.9” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.4 with Auto focus; Lens Mount: Ø14; IR Range: 40 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 32 Kbps to 8 Mbps; Audio Compression: VBR/adjustable CDR/G.711 / G.722.1/G.726/MP2L2/PCM; Environment Noise Filtering: Yes; Audio Sampling Rate: 8kHz/16kHz/32kHz/44.1kHZ/48kHz; Image Max. Resolution: 1920 × 1080, 50Hz: 25fps; Image Enhancement: BLC/3D DNR/HLC; Image Setting: Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser; Day/Night Switch: Day/Night/ Auto/Schedule/Triggered by Alarm In; Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD full, HDD error, Alarm input, Alarm output; Alarm output Protocols: TCP/IP, ICMP, HTTP, etc; Edge Analytics: line crossing, region entry/exit, intrusion, video blur, face capture, detection, etc; Simultaneous Live View: Up to 6 channels; User/Host: Up to 8 users, 3 levels: Administrator, Operator and User; Interface: 1 input (line in, 3.5 mm), 1 output(3.5 mm), single track / 1 RJ45 10M/100M self-adaptive Ethernet port / 1 input, 1 output (max. 12 VDC, 30 mA) / 1Vp-p composite output (75 Ω/BNC) / Built-in Micro SD/SDHC/SDXC slot, up to 128 GB / H.264 encoding supports; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Make:Hikvision, Infinova, Hanwha, IDIS, Dahua, Norden Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 29 SITC of IP 4 MP IR Bullet Camera (complete with perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.9” Progressive Scan CMOS; Min. Illumination: Color: 0.002 lux @(F1.2-1.7, AGC ON), 0.0002 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 12 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.4 with Auto focus; Lens Mount: Ø14; IR Range: 40 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 32 Kbps to 8 Mbps; Audio Compression: VBR/adjustable CDR/G.711 / G.722.1/G.726/MP2L2/PCM; Environment Noise Filtering: Yes; Audio Sampling Rate: 8kHz/16kHz/32kHz/44.1kHZ/48kHz; Image Max. Resolution: 1920 × 1080, 50Hz: 25fps; Image Enhancement: BLC/3D DNR/HLC; Image Setting: Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser; Day/Night Switch: Day/Night/ Auto/Schedule/Triggered by Alarm In; Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD full, HDD error, Alarm input, Alarm output; Alarm output Protocols: TCP/IP, ICMP, HTTP, etc; Edge Analytics: line crossing, region entry/exit, intrusion, video blur, face capture, detection, etc; Simultaneous Live View: Up to 6 channels; User/Host: Up to 8 users, 3 levels: Administrator, Operator and User; Interface: 1 input (line in, 3.5 mm), 1 output(3.5 mm), single track / 1 RJ45 10M/100M self-adaptive Ethernet port / 1 input, 1 output (max. 12 VDC, 30 mA) / 1Vp-p composite output (75 Ω/BNC) / Built-in Micro SD/SDHC/SDXC slot, up to 128 GB / H.264 encoding supports; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Make: Hikvision, Infinova, Hanwha, IDIS, Dahua, Norden Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 30 SITC of 64 Channel IP 4K NVR having minimum technical specification: Video Input: 64 Channel IP Fully Featured NVR; Audio Iuput/Output: 1 Channel Input/2 Channel Outputs, RCA; Display Interface: 2 HDMI (1 HDMI up to 3840 × 2160); 2 VGA; Display Split: 1/4/8/9/16/25/36/64; OSD: Camera title; Time; Video loss; Camera lock; Motion detection; Recording; Compression: H.265/H.264/MJPEG/MPEG4; Resolution: 12 MP (4000 × 3000); 8 MP (3840 × 2160); 6 MP (3072 × 2048); 5 MP (2560 × 1920); 4 MP (2560 × 1440); 3 MP (2048 × 1520); 1080p (1920 × 1080); 720p (1280 × 720); D1 (704 × 576 / 704 × 480); CIF (352 × 288 / 352 × 240); Frame Rate: 1–15 fps (12 MP and 8 MP); 1–25/30 fps (rest of the resolutions); Record Bit Rate: 256Mbps or 200Mbps(when RAID is enabled); Bit Rate: 16 kbps ~ 20 Mbps, per channel; Recording Mode: Schedule (Regular/Continuous, Motion Detection, Alarm); Manual; Stop; Trigger Events: Recording; PTZ; Tour; Alarm; Video Push; Email; FTP; Snapshot; Buzzer; Video Detection: Motion Detection—MD Zones: 396 (22 × 18); Video Loss; Camera Blank; Relay Output: 6 Channels; Storage: Internal HDD: 8 SATA ports (minimum), HDDs expandable: minimum 80 TB or higher (10 TB each or higher, Hard Disk Not Included); Sync Playback: 1/4/8/16 (maximum 4-ch @ 8MP, 8-ch @ 4MP, or 16-ch @ 1080p simulateous playback); Search Mode: Time/Date; Alarm; Motion Detection (MD); Exact Search (accurate to a second); Smart Search; Playback Function: Play; Pause; Stop; Rewind; Fast play; Slow play; Next File; Previous File; Next Camera; Previous Camera; Full Screen; Repeat; Shuffle; Backup selection; Digital Zoom; Network: Ethernet: 1 RJ-45 port (10/100/1000 Mbps); Supported Protocols: HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search, P2P, RAID; Network Throughput: Input 256Mbps or 200Mbps (when RAID is enabled); Output 256Mbps or 200Mbps (when RAID is enabled); Cascading: Built-in CMS to Monitor and Manage Multiple Matrix NVRs; ONVIF and Major Camera Brands Support; Usb Port: 4; RS232: 1 port (for PC communications and keyboard). Temperature: -10 ºC ~ +55 ºC; REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Wireless Bluetooth Multi Device Keyboard and Mouse. Make: Hikvision, Infinova, Hanwha, IDIS, Dahua, Norden Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 31 SITC of Hard Disk. Spec: Surveillance Grade HDD of minimum 7200 rpm for video storage 8 TB storage capacity Make : SEAGATE, WESTERN DIGITAL, HITACHI, Sony Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 32 Supply of Desktop Computer having minimum technical specification: Processor: Intel Core i5-12500 or Higher; Chipset: Intel Q670or higher, 2 DIMM slots or higher and minimum 4 PCIe series expansion slots; RAM: DDR4 8(1x8) GB 3200MHz with support for expansion upto 64 GB; Hard Disk: 1 x 512 GB Gen4 M.2 SSD or higher; Integrated Graphics: UHD/4K Intel Graphics 630 or higher; Dedicate Graphic Card: 4GB DDR5 Nvidia GeForce 1060i; Management: Intel vPro (Optional); Operating System: Windows 10 Pro 64Bit preloaded with latest build along with recovery media; Networking Interface: Integrated Gigabit 10/100/1000; Connectivity: Integrated Dual Band Wi-Fi 802.11 a/b/g/n/ac & Bluetooth 5.0 Combo or higher; Optical Drive: Integrated RW/DVD Drive (Optional); Display:Nill ; Audio: Integrated Audio controller with Internal speaker; Keyboard: Standard Keyboard; Mouse: Optical Scroll Mouse; USB/HDMI/VGA Ports: Integrated HDMI Port: Minimum 1 no, Integrated VGA / Display Port: Minimum 1 no, Integrated USB Port: Minimum 8 nos (Min 4 nos of 3.1 Gen-1), out of 8 Nos minimum4 in front, 4 in back and should be easily accessible; Security: Hardware based TPM 2.0, chassis Intrusion switch / Intrusion Sensor with chassis physical security cable lock slot; SMPS: Minimum 260 W or above; Cabinet Form Factor: SFF/Tower; Certification and Compliance: Windows 10 Pro Certification for the quoted desktop model, EPEAT India for the quoted desktop model, Minimum Energy Star 5.0 & TCO Certification for both Monitors and Desktop model, ISO 9001 and 14001 Certified for OEM India Unit; Inclusive of MOUSE Pad, Dust Cover. To be Installed at Site. Make: Dell, HP, Acer, Lenovo Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 33 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification: Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D-LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 440cd/m^2 or nits or higher, Contrast Ratio (Static): 1200:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Connectivity: HDMI 2.0, USB2.0, DVI-D, Display Port, M3, RJ-45, RS232C; Networking Interface: Integrated Gigabit 10/100/1000 & Dual Band Wi-Fi 802.11 a/b/g/n/ac; Video Input: HDMI 2.0, Audio In: Stereo mini Jack, DVI, HDMI; Audio Out: Stereo mini Jack; Power consumption typical (w/h): as per OEM, Operating Temperature: 0℃~ 40℃, 24x7; Humidity: 10~90%, IP Rating: IP 5x; Others: auto source switching; Certification: BIS, FCC UL. Including HDMI Cable and Wall mount/Floor stand/swivel fixing arrangement with All other Accessories as per site requirement. Make: Panasonic, Delta, Sony, Samsung, Sharp, LG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 34 SITC of:Face Recognition Enabled Biometric Device with the following Configuration: 7-inch LCD touch screen, 2 MP wide-angle dual-lens, Face recognition distance: 0.3 to 3m,5,000 face capacity, 5,000 fingerprint capacity, 6000 card capacity and 50,000 event capacity, Multiple authentication modes, Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%, Imports card and user data to the device via TCP/IP communication, Stand-alone operation, Transmits data to the client software via TCP, IP communication and saves the data on the client software, Capture linkage and captured pictures saving,Imports data to the device from the client software, Connects to one external card reader or access controller via RS-485 protocol, Audio prompt. Interface: Network × 1, RS-485 × 1, Wiegand × 1, USB × 1, alarm output × 1, alarm input × 2,lock ×1, door contact × 1, exit button × 1, tamper × 1. Make: Mantra, Matrix, Bosch, Honeywell, Hikvision Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 35 SITC of: Application Software Platform for minimum 150 Users. 150 user Web based user friendly GUI application and real-time monitoring of door controllers from one place, Built on 3-Tier, .NET Platform with MS-SQL and Oracle database, expandable and modular without change in the hardware-Built on 3-Tier, .NET Platform with MS-SQL and Oracle database, expandable and modular without change in the hardware, Provides head count of number of users in the premises, basic door access feature to users, user photo display on large screen during access, O virtual message board facility for posting daily notices, news, announcements, should support upto 65000 door controllers and 1 million users in the network, automatic and customized SMS & E-mail notifications, informative reports & charts with various filters, customized report templates; and export reports in Excel, Word, RPT, PDF, CSV and XML etc, automatic E-mail scheduler facility for different reports, user enrolment management software module with user photograph upload facility, user verification functionality, mass enrolment functionality, user name and ID search functionality, Dual Credential Access: Device will allow the User to access the device using FACE + FINGER/ FACE+RFID credential access etc, Alarms: Door abnormal: When a User Access the device and opens the door but door is not physically closed within Pulse time (Door Open Timer), device will generate Door Held Open Alarm after configured duration it will be converted to Abnormal., Door Force Open: When a User tries to open the door without valid swipe, device will generate Door Force Open Alarm. , c. Door Held Open Too Long Alarm: If the Door remains in physically open condition after Door Open Timer, device will generate Door held Open Alarm. Make: Mantra, Tyco, Matrix, Bosch, Honeywell, Hikvision, Matrix, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 36 SITC of:Time-Attendance Module (TAM), Comprehensive Time-Attendance and Leave Management Software Module, Attendance and Leave Policy Creation Integration with Payroll, Tally, Active Directory and HRM, Shift Schedule, Holiday Schedule and Past Adjustment, Manually Attendance Correction Leave/Tour Application and Approval, SMS and Email Notification, Reports and Charts Generation. Make: Mantra, Tyco, Matrix, Bosch, Honeywell, Hikvision, Matrix, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 37 Supply of Desktop Computer having minimum technical specification: Processor: Intel Core i3-10100 or Higher; Chipset: Intel Q470 or higher, 2 DIMM slots or higher and minimum 4 PCIe series expansion slots; RAM: DDR4 8(1x8) GB 3200MHz with support for expansion upto 64 GB; Hard Disk: 1 x 500GB Gen4 M.2 SSD or higher; Integrated Graphics: UHD/4K Intel Graphics 630 or higher; Dedicate Graphic Card: NIll; Management: Intel vPro (Optional); Operating System: Windows 10 Pro 64Bit preloaded with latest build along with recovery media; Networking Interface: Integrated Gigabit 10/100/1000; Connectivity: Integrated Dual Band Wi-Fi 802.11 a/b/g/n/ac & Bluetooth 5.0 Combo or higher; Optical Drive: Integrated RW/DVD Drive (Optional); Display: 21.5 inch or higher, Full HD Or Better, Antiglare, Non-Touch, LED-backlit Monitor; 178° vertical / 178° horizontal Display Viewing Angle, Monitor stand should be height adjustable; should have at least one VGA, one Display port, one HDMI port and four USB ports; Audio: Integrated Audio controller with Internal speaker; Keyboard: Standard Keyboard; Mouse: Optical Scroll Mouse; USB/HDMI/VGA Ports: Integrated HDMI Port: Minimum 1 no, Integrated VGA / Display Port: Minimum 1 no, Integrated USB Port: Minimum 8 nos (Min 4 nos of 3.1 Gen-1), out of 8 Nos minimum4 in front, 4 in back and should be easily accessible; Security: Hardware based TPM 2.0, chassis Intrusion switch / Intrusion Sensor with chassis physical security cable lock slot; SMPS: Minimum 230 W or above; Cabinet Form Factor: SFF/Tower; Certification and Compliance: Windows 10 Pro Certification for the quoted desktop model, EPEAT India for the quoted desktop model, Minimum Energy Star 5.0 & TCO Certification for both Monitors and Desktop model, ISO 9001 and 14001 Certified for OEM India Unit; Inclusive of MOUSE Pad, Dust Cover. To be Installed at Site. with microsoft office. Make: Dell, HP, Acer, Lenovo, RPD Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 38 Supply of A4 LaserJet Multifunction ADF Mono Network Printer having minimum technical specification: Function: Print, Copy, Scan; Memory: 256 MB; Print speed black: A4, 600 x 600dpi; Simplex: Up to 28 pages per minute (ppm); Copy speed black: Black (A4, normal): Up to 28 cpm; Scan Speed: Up to 14 ppm (b&w), up to 5 ppm (color); Print Resolution: Up to 1200 x 1200 dpi; Print Resolution Technologies: FastRes 600; FastRes 1200; Copy Resolution: Up to 600 x 600 dpi; Scan resolution: Up to 600 x 600 dpi; Connectivity: Hi-Speed USB 2.0 port; built-in Fast Ethernet 10/100Base-TX network port, built-in WiFi 802.11b/g/n; Paper Size: A4, A5(L), A5(P), A6, B5, B6, 16k, 10 x 15 cm, Post Cards (JIS), Envelopes (DL, C5, B5); Auto Document Feeder (ADF): 35 sheets (60 to 163 g/m²); Available Paper Size for ADF: A4, B5, A5, B6, Letter, Legal(*1), Statement, Custom Size (min. 139.7 x 128mm to max. 215.9 x 355.6mm); Paper Input: 250 sheets, Paper Output: 100 sheets (face down); Magnification: 25% - 400% (1% Increments); Multiple Copies: Up to 99 copies; Monthly Duty Cycle: 30,000 pages; Toner Cartridge: Standard: Black LaserJet Toner Cartridge (~1500 yield); Certification and Compliance: ENERGY STAR® qualified, CECP; Auto Duplex Printing & Coping (Scanning Optional); Display: 2-line LCD (text) nonTouch Screen. To be Installed at Site. Make: HP, Canon, Epson Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 39 SITC of Wall Speaker: 2 way, on wall, 6.0 LF, includes bracket, TRANSDUCER COMPLEMENTS: HF 1 x 0.5 tweeter; TRANSDUCER COMPLEMENTS: LF 1 x 3.5 woofer; SPL @ RATED POWER 103 dB @ 30 W; NOMINAL IMPEDANCE 8 Ω; SENSITIVITY (1 W 1M) 86 dB (half space); FREQUENCY RANGE 130 Hz ~ 20 kHz (-10 dB); CONTINUOUS POWER HANDLING 50 W (direct mode); POWER TAPS @ 100V 3.8, 7.5, 15, 30 W. Make: Yamaha, Sonodyne,Bosch Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 40 SITC ofAmplifier: Lo-Z/Hi-Z switchable Class-D mixer amplifier (Lo-Z: 300W x2 @4Ω, 3000W x2ch @3Ω/8Ω,　Hi-Z: 120W x2ch or 200W x1ch, 70V/100V) equipped with 6 mic/line inputs, 2 stereo inputs and powerful DSP functions for high quality music playback and microphone use.≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W), 0dB, -2.5dB, +1.0dB (Line in to Line out, 20Hz to 20kHz), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω/8Ω), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V, 120W/200W),Input 1-6: 3.5mm Euroblock (6-pin, balanced) x 3,Operating Temperature: 0°C to + 40°C Make: Austrilian Monitor, Yamaha, Bosch Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 41 SITC of Compact Digital Signal Processor having minimum technical specification: 4 x 4 Networked Digital Signal Processor With AEC and VOIP, Shall have 4 floating AEC in group of 4 Ch, 12 Control Inputs and 8 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, THD: <0.01% 20Hz to 20KHz, +10dBu output, Crosstalk: <-75dB, Open architecture software configurable, Separate logic processing power, 2 digital audio bus RJ 45 Port, 1 Ethernet port for Monitoring and configuration , Capable to handle +5V unloaded logic output voltage , Should have speech sense engine , Capable to control 3rd party devices with TCP IP and RS 232, Should have 1 nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus, Should have monitoring LED for COM, STAT, ERR and PWR, Built-in USB sound card for recording, Up to 8 settings can be presetCertificate: CE, EAC, RoHS; Accessories: Owners Manual, Retaining knob, Terminal cover screw, Wall / Ceiling mount bracket, Terminal cover. Operating temperature: 0°C to +40°C. Make: Yamaha, BSS(Harman), L-Acoustics, D&B, Bosch, BXB, Adonis. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 42 SITC of 12 ch analog mixer: Input Channel Mixing channels 4 Line Inputs , 2 mono and Output Channel: 2 stereo ; GROUP 4 GROUP Buses + ST Bus ; AUX 2 AUX Sends + 2 FX Sends ; MATRIX 1 Matrix out ; On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX 8 PROGRAM, PARAMETER control), Power Consumption: 12W, Make: yamaha, soundcraft, ALLEN&HEATH Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 43 SITC of HDMI Passive Wall Plate/Architectural Adapter Plate having minimum technical specification: Wallplate with Pass-Through Connectors for HDMI and Stereo Audio, as per specification. Connectivities: 1 x HDMI, 1 x Audio; Frame rate124, 25, 30, 50, or 60 fps; Chroma sampling14:4:4, 4:2:2, or 4:2:0; Color bit depth18 bits per color; Resolution rangeHDMI cable: Up to 4K @ 60 Hz (4096x2160) or UHD @ 60 Hz (3840x2160) 8 bit color depth, max. 10.2 Gpbs data rate; Signal typeHDMI 1.4; Max. video data rate10.2 Gbps (3.4 Gbps per colour). Operating temperature 5 ºC to +45 ºC; Make: Extron, Lightware, Kramer, CYP, Seada, Analogway Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 44 SITC of Wired Chairman Unit: .Wired chairman unit with priority over delegates, as per specifications. Digital:Color-coded LED indicator above microphone button for showing the following states: microphone on,request‑to‑speak, and possible‑to‑speak, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Frequency response:60 Hz to 14 kHz, Headphones load impedance:> 32 ohms < 1k ohm, Loudspeaker nominal output:63 dB SPL, Length of microphone :480 mm (18.5 in), Operating temperature:0 ºC to +35 ºC, Immunity to mobile phone interference & chairman conference control,chairman button; Make: Ahuja, Bosch, Studiomaster Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 45 SITC of Wired delegate Unit: .Wired chairman unit with priority over delegates, as per specifications. Digital:Color-coded LED indicator above microphone button for showing the following states: microphone on,request‑to‑speak, and possible‑to‑speak, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Frequency response:60 Hz to 14 kHz, Headphones load impedance:> 32 ohms < 1k ohm, Loudspeaker nominal output:63 dB SPL, Length of microphone :480 mm (18.5 in), Operating temperature:0 ºC to +35 ºC, Immunity to mobile phone interference & chairman conference control,chairman button; Make: Ahuja, Bosch, Studiomaster Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 46 SITC of Central Control Unit: Control unit for chairman & delegate units, as per specifications. Built‑in MP3 recorder with internal memory and USB recording, Built‑in Digital Acoustic Feedback Suppression, Quick and easy connection upto 50 discussion devices, Native support for automatic HD camera control, Signal to noice :> 60 dBA, Frequency response for input :60 Hz to 14 kHz, Recording/ Playback (bit rate):64, 96, 128, 256 Kbit/sec, Nominal loudspeaker output:72 dB SPL, Operating temperature: 5 ºC to +45 ºC, Relative humidity: 5% to 98% non-condensing, Web browser control. Make:Ahuja, Bosch, Studiomaster Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 47 SITC of Wireless Handheld Microphone having minimum technical specification: Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 50 - 15,000 Hz , THD at 1 kHz: <0.3%(Receiver) , Signal-to-noise: 120 dB(A)( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , Upto 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW. Make: Ahuja, Bosch, Studiomaster Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 48 SITC of Lapel microphone:Receiver-Dual Channel Non-Diversity,Frequency Response - 40Hz-16kHz, Polar Pattern (Hand & Lapel mic)- Cardioid, Output, Individual Channel: XLR(Mix out: ¼ Jack), Power Req. (Hand mic) -2 x 1.5V AA, Receiver-240V AC 50Hz for & AC Adaptor. Make: Studiomaster, Ahuja, AKG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service. 49 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification: Size (diagonally): 65-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D-LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 440cd/m^2 or nits or higher, Contrast Ratio (Static): 1200:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less,; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Connectivity: HDMI 2.0, USB2.0, DVI-D, Display Port, M3, RJ-45, RS232C; Networking Interface: Integrated Gigabit 10/100/1000 & Dual Band Wi-Fi 802.11 a/b/g/n/ac; Video Input: HDMI 2.0, Audio In: Stereo mini Jack, DVI, HDMI; Audio Out: Stereo mini Jack; Power consumption typical (w/h): as per OEM, Operating Temperature: 0℃~ 40℃, 24x7; Humidity: 10~90%, IP Rating: IP 5x; Others: auto source switching; Certification: BIS, FCC UL. Including HDMI Cable and Wall mount/Floor stand/swivel fixing arrangement with All other Accessories as per site requirement. Make: Panasonic, Delta, Sony, Samsung, Sharp, LG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 50 SITC of Commercial LED FHD Display (Indoor Type) having minimum technical specification: Size (diagonally): 43-inch; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel, D-LED, Edge LED, Resolution: 1920x1080 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Brightness: 440cd, m^2 or nits or higher, Contrast Ratio: 1200:1, Viewing Angle: 178° Vertical ,178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Connectivity: 1 x HDMI 2.0, 1 x USB2.0, 3 x USB3.0, 1 x Display Port, 1 x M3; Video Input: 1 x HDMI 2.0, Audio In: Stereo mini Jack, HDMI; Audio Out: Stereo mini Jack; Power consumption typical (w, h): as per OEM, Operating Temperature: 0℃~ 40℃, Humidity: 10~90%, IP Rating: IP 5x; Others: auto source switching; Certification: BIS, FCC UL. Including HDMI Cable and with swivel fixing arrangement with All other Accessories as per site requirement. Make: Panasonic, Delta,LG, Sony, Samsung Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 51 SITC of Commercial LED FHD Display (Indoor Type) having minimum technical specification: Size (diagonally): 32-inch; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel, D-LED, Edge LED, Resolution: 1920x1080 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Brightness: 440cd, m^2 or nits or higher, Contrast Ratio: 1200:1, Viewing Angle: 178° Vertical ,178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Connectivity: 1 x HDMI 2.0, 1 x USB2.0, 3 x USB3.0, 1 x Display Port, 1 x M3; Video Input: 1 x HDMI 2.0, Audio In: Stereo mini Jack, HDMI; Audio Out: Stereo mini Jack; Power consumption typical (w, h): as per OEM, Operating Temperature: 0℃~ 40℃, Humidity: 10~90%, IP Rating: IP 5x; Others: auto source switching; Certification: BIS, FCC UL. Including HDMI Cable and with swivel fixing arrangement with All other Accessories as per site requirement. with mounting arrangement. Make: Panasonic, Delta,LG, Sony, Samsung Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 52 SITC of HD HDMI PTZ Communication Camera having minimum technical specification: 1/2.8 2.41MP CMOS Sensor; Aperture: F1.6~F2.8; Focal Length: f = 3.92 ~ 47.32 mm; Shutter Speed: 1/1 ~ 1/10,000 sec; Minimum: Illumination 1.6 lux (F1.8, 50IRE, 60fps); Effective Pixels: 1920 x 1080p; Pan / Tilt Pan: ±130°, Tilt: +90°-25°; 20x optical zoom or higher: Horizontal field of view 70° (min) Vertical angle of view40° (min) Connection Cable: HDMI; Control Interface: RS-232 In and Out / USB; Control Protocol: VISCA / UVC; Video Stream: YUV422 / MJPEG; Video Format: HDMI: 1080p 60 / 50 fps; 720p 60 / 50 fps; USB: 1080p 30 / 25 fps; 720p 30 / 25 fps; Video Output (HD); Focus System: Auto; Interface HDMI / USB 3.0;Power supply voltage: 12 VDC±10% (with AC adaptor attached), Consumption current: 1.2 A; Operating Temperature: 0 °C to 40 °C; Certification: UL/CE. Make: Cisco, Panasonic, Polycom, Avaya, Lumens, adonis, A&T Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 53 Supply of Desktop Computers having minimum technical specification: Processor: Intel Core i3-12500 or Higher; Chipset: Intel Q670 or higher, 2 DIMM slots or higher and minimum 4 PCIe series expansion slots; RAM: DDR4 8(1x8) GB 3200MHz with support for expansion upto 16 GB; Hard Disk: 1 x 512 GB Gen4 M.2 SSD or higher; Integrated Graphics: UHD Intel Graphics 770 or higher; Dedicate Graphic Card:Nill;Operating System: Windows 11 Pro 64Bit preloaded with latest build along with recovery media; Networking Interface: Integrated Gigabit 10/100/1000; Connectivity: Integrated Dual Band Wi-Fi 802.11 a/b/g/n/ax & Bluetooth 5.3 Combo or higher; Optical Drive: Integrated RW/DVD Drive; Display: Nill; Audio: Integrated Audio controller with Internal speaker; Keyboard: Standard Keyboard; Mouse: Optical Scroll Mouse; USB/HDMI/VGA Ports: Integrated HDMI Port: Minimum 1 no, Integrated VGA / Display Port: Minimum 1 no, Integrated USB Port: Minimum 8 nos (Min 4 nos of 3.1 Gen-1), out of 8 Nos minimum4 in front, 4 in back and should be easily accessible; Security: Hardware based TPM 2.0, chassis Intrusion switch / Intrusion Sensor with chassis physical security cable lock slot; SMPS: Minimum 260 W or above; Cabinet Form Factor: SFF/Tower; Certification and Compliance: Windows 10 Pro Certification for the quoted desktop model, EPEAT India for the quoted desktop model, Minimum Energy Star 5.0 & TCO Certification for both Monitors and Desktop model, ISO 9001 and 14001 Certified for OEM India Unit; To be Installed at Site. GEM Id: 5116877-9131675841 Make: Dell, HP,Lenovo Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 54 SITC of 4X 4 4K HDMI Switcher: 4-Port True 4K HDMI Splitter, Superior video quality - True 4K resolutions of 4K x 2K @ 60 Hz (4:4:4) and standard 1080p (1920 x 1080 @ 60 Hz), HDMI (3D, Deep Color, 4K); HDCP 2.2 compliant, Built-in bi-directional RS-232 serial port for high-end system control. Model: CPRO U8T; Make:CYPRESS, ANALOGWAY,SEADA, Aten Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.. 55 SITC of HDMI Transmitter: HDMI overTwisted pair - 70 mtrs, as per specifications. Input: HDMI x 1; Output: CAT6 x 1 (RJ45-F); Chroma sampling14:4:4, 4:2:2, or 4:2:0; Resolution rangeUp to 2560x1600* @ 60 Hz or4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling; Pixel Clock Reates upto 300MHz;Standards : HDMI 1.4, HDCP 2.2 or higher; Signal typeHDMI 1.4, HDCP 2.2 or better; Max. video data rate10.2 Gbps (3.4 Gbps per color). Make: Extron, Lightware, Kramer, CYP, Seada, Analogway Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 56 SITC of HDMI Receiver: HDMI overTwisted pair - 70 mtrs, as per specifications. Input: CAT6 x 1 (RJ45-F) x 1; Output:HDMI x1; Chroma sampling14:4:4, 4:2:2, or 4:2:0; Resolution rangeUp to 2560x1600* @ 60 Hz or4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling; Pixel Clock Reates upto 300MHz;Standards : HDMI 1.4, HDCP 2.2 or higher; Signal typeHDMI 1.4, HDCP 2.2 or better; Max. video data rate10.2 Gbps (3.4 Gbps per color). Model: DTP HDMI 4K 230 Rx; Make: Extron, Lightware, Kramer, CYP, Seada, Analogway Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 57 SITC of Floor Mounted Cross Connect Audio-Video Equipments Rack 22U x 800 x 800 Rack - Front Glass Door with Cam Lock - Fan Unit of 360CFM(Min) / 230 Volt - 4no - 6; Way 5A PDU, along with input Cable - 2no - H/w Packet of 20 - 8nos - 1U PVC Cable Manager - 6nos. Make: VERTIV/NETRACK/VALRACK/APW/TATA 58 SITC of Snake Cable, Microphone Cable, HDMI or VGA Cable, 4K High Speed HDMI Cable, Precision-terminated Shielded Twisted Pair Cables, HDMI HDBaseT-Lite Extender, 8 In 4 Out Stage Pocket Box, 4/8-Port HDMI Matrix/Splitter/Switcher & Armoured Audio Cable, Extension Cable Assy 10M with Male Female Connector, Shoulder Bar And Nuts Installation Kit, Connectors & all interconnects,etc: *Snake Cable: 16 Core Snake Cable in mtr *Microphone Cable: Mic Cable -25/42 in mtr *8 In 4 Out Stage Pocket Box: as per site requirement. *HDMI HDBaseT-Lite Extender: as per site requirement. *Ultra Flexible Premium HDMI or VGA Cable:Conductor Gauge-26AWG; Tinned Copper; Gold plated connector; Rating-UL VW-1 (Flame rate), CSA. quantity, length (20mtr/10mtr/5mtr/3mtr/2mtr); *Precision-terminated Shielded Twisted Pair NEC CMP rated, Plenum Cables 75feet; *Extension Cable Assy 10M with Male Female Connector: *PVC conduits(ISI marked): laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Armoured Audio Cable for Speaker & Microphone, Connectors & all interconnects, etc, quantity as per site requirement. Make (Connectors): Swisscraft/Neutrik/Amphenol Make (Snake Cable): Krystals/Belden/Sommer/Extron/Lightware/Crestron Make (Microphone cable): Krystals/Belden/Sommer/Extron/Lightware/Crestron Make (HDMI Cable): Extron/Lightware/Crestron/Krystals/Belden/Sommer Make (PVC conduits): Precision/Presto Plast/Supreme 59 SITC of Wall Speaker: 2 way, on wall, 6.0 LF, includes bracket, TRANSDUCER COMPLEMENTS: HF 1 x 0.5 tweeter; TRANSDUCER COMPLEMENTS: LF 1 x 3.5 woofer; SPL @ RATED POWER 103 dB @ 30 W; NOMINAL IMPEDANCE 8 Ω; SENSITIVITY (1 W 1M) 86 dB (half space); FREQUENCY RANGE 130 Hz ~ 20 kHz (-10 dB); CONTINUOUS POWER HANDLING 50 W (direct mode); POWER TAPS @ 100V 3.8, 7.5, 15, 30 W. Make: Yamaha, Sonodyne,Bosch Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 60 SITC ofAmplifier: Lo-Z/Hi-Z switchable Class-D mixer amplifier (Lo-Z: 120W x2 @4Ω, 100W x2ch @3Ω/8Ω,　Hi-Z: 120W x2ch or 200W x1ch, 70V/100V) equipped with 6 mic/line inputs, 2 stereo inputs and powerful DSP functions for high quality music playback and microphone use.≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W), 0dB, -2.5dB, +1.0dB (Line in to Line out, 20Hz to 20kHz), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω/8Ω), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V, 120W/200W),Input 1-6: 3.5mm Euroblock (6-pin, balanced) x 3,Operating Temperature: 0°C to + 40°C Make: Austrilian Monitor, Yamaha, Bosch Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 61 SITC of 12 ch analog mixer: Input Channel Mixing channels 4 Line Inputs , 2 mono and Output Channel: 2 stereo ; GROUP 4 GROUP Buses + ST Bus ; AUX 2 AUX Sends + 2 FX Sends ; MATRIX 1 Matrix out ; On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX 8 PROGRAM, PARAMETER control), Power Consumption: 12W, Make: yamaha, soundcraft, ALLEN&HEATH Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 62 SITC of HDMI Passive Wall Plate/Architectural Adapter Plate having minimum technical specification: Wallplate with Pass-Through Connectors for HDMI and Stereo Audio, as per specification. Connectivities: 1 x HDMI, 1 x Audio; Frame rate124, 25, 30, 50, or 60 fps; Chroma sampling14:4:4, 4:2:2, or 4:2:0; Color bit depth18 bits per color; Resolution rangeHDMI cable: Up to 4K @ 60 Hz (4096x2160) or UHD @ 60 Hz (3840x2160) 8 bit color depth, max. 10.2 Gpbs data rate; Signal typeHDMI 1.4; Max. video data rate10.2 Gbps (3.4 Gbps per colour). Operating temperature 5 ºC to +45 ºC; Make: Extron, Lightware, Kramer, CYP, Seada, Analogway Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 63 SITC of Wired Chairman Unit: .Wired chairman unit with priority over delegates, as per specifications. Digital:Color-coded LED indicator above microphone button for showing the following states: microphone on,request‑to‑speak, and possible‑to‑speak, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Frequency response:60 Hz to 14 kHz, Headphones load impedance:> 32 ohms < 1k ohm, Loudspeaker nominal output:63 dB SPL, Length of microphone :480 mm (18.5 in), Operating temperature:0 ºC to +35 ºC, Immunity to mobile phone interference & chairman conference control,chairman button; Make: Ahuja, Bosch, Sure, sennheiser, Tiden, Televic, Audio-Technica Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 64 SITC of Wired delegate Unit: .Wired chairman unit with priority over delegates, as per specifications. Digital:Color-coded LED indicator above microphone button for showing the following states: microphone on,request‑to‑speak, and possible‑to‑speak, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Frequency response:60 Hz to 14 kHz, Headphones load impedance:> 32 ohms < 1k ohm, Loudspeaker nominal output:63 dB SPL, Length of microphone :480 mm (18.5 in), Operating temperature:0 ºC to +35 ºC, Immunity to mobile phone interference & chairman conference control,chairman button; Make: Ahuja, Bosch, Sure, sennheiser, Tiden, Televic, Audio-Technica Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 65 SITC of Central Control Unit: Control unit for chairman & delegate units, as per specifications. Built‑in MP3 recorder with internal memory and USB recording, Built‑in Digital Acoustic Feedback Suppression, Quick and easy connection upto 50 discussion devices, Native support for automatic HD camera control, Signal to noice :> 60 dBA, Frequency response for input :60 Hz to 14 kHz, Recording/ Playback (bit rate):64, 96, 128, 256 Kbit/sec, Nominal loudspeaker output:72 dB SPL, Operating temperature: 5 ºC to +45 ºC, Relative humidity: 5% to 98% non-condensing, Web browser control. Make:Ahuja, Bosch, Sure, sennheiser, Tiden, Televic, Audio-Technica Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 66 SITC of Wireless Handheld Microphone having minimum technical specification: Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 50 - 15,000 Hz , THD at 1 kHz: <0.3%(Receiver) , Signal-to-noise: 120 dB(A)( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , Upto 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW. Make: Studiomaster, Ahuja, Audio-Technica, AKG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 67 SITC of Lapel microphone:Receiver-Dual Channel Non-Diversity,Frequency Response - 40Hz-16kHz, Polar Pattern (Hand & Lapel mic)- Cardioid, Output, Individual Channel: XLR(Mix out: ¼ Jack), Power Req. (Hand mic) -2 x 1.5V AA, Receiver-240V AC 50Hz for & AC Adaptor. Make: Studiomaster, Ahuja, AKG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service. 68 SITC of WUXGA laserProjector having minimum technical specification: Light Source: Lamp ; LCD panel: 16.3 mm (0.64 in) diagonal (16:10 aspect ratio) Transparent LCD panel (× 3, R/G/B) system; Drive method: Active-matrix method; Brightness: White Light Output (Normal/Eco): 5,000lm/3600 lm , Colour Light Output: 5,000lm/ 3600 lm or higher; Contrast Ratio : 15000:1 or higher;Resolution: WXGA resolution (1280 x 800 pixels) or higher; Throw Ratio: 1.38 - 2.24; Lens: 1.6x zoom, F=1.7 – 2.3, f 26.8– 45.5 mm; Lens Driving: Manual/ Auto ; Lens Shift (Manual): V: +67~0% , H: +/-35% (from the center of the screen); Light source life in Normal mode: 5,000 Hr( normal )/ 10000 Hr (Eco mode) ;Connectivity: Network: Wired LAN: RJ45 x 1 (10Base-T/100Base-TX); Wireless: Dual Band Wi-Fi 802.11 a/b/g/n/ac; Quick start and Quick Off: Yes; Color board and black board modes: Yes; Keystone Correction: Horizontal, Vertical and Corner keystone correction; Vertical: +/-25, Horizontal: +/-35; Fan Noise: 39dB~29dB or less; Power consumption: 405 W normal or less; Power Supply: AC 100V - 240V, (3.8A-1.6A) 50Hz/60Hz; Digital Input Terminal: HDMI x 2 (Should support 4K@30Hz & HDCP Compatible); Other Inputs: VGA In x 2, VGA Out x 1, Video In x 1, Audio In x 3, Audio Out x 3, USB Type A x 1, RS-232C x 1, D-Sub 9pin x 1; Operating Temperature: Single Use: 0 - 45 °C; Operating humidity: 20% - 80% humidity, No condensation; Inclusive of HDMI Cable (15mtr) and High Celling Mount Bracket fixing arrangement with All other Accessories as per site requirement. Make: Epson, Sony, Panasonic, Banq Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 69 SITC of Motorized Projector Screen having minimum technical specification: Motorized Projector Screen 120 or Higher Diagonal in 4:3 format; Gain: 1.1; Viewing Angle: 180°, 4 layer matte white material with fibreglass backing; wit IR remote control system, 12v trigger plug in, RS232 central command, external IR interface & built-in switch, with required wall/ ceiling mounting arrangements with All other Accessories as per site requirement. Make: Elite, Liberty, Grandview, Dalite, Draper Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 70 SITC of Floor Mounted Cross Connect Audio-Video Equipments Rack 22U x 800 x 800 Rack - Front Glass Door with Cam Lock - Fan Unit of 360CFM(Min) / 230 Volt - 4no - 6; Way 5A PDU, along with input Cable - 2no - H/w Packet of 20 - 8nos - 1U PVC Cable Manager - 6nos. Make: VERTIV/NETRACK/VALRACK/APW/TATA 71 SITC of Snake Cable, Microphone Cable, HDMI or VGA Cable, 4K High Speed HDMI Cable, Precision-terminated Shielded Twisted Pair Cables, HDMI HDBaseT-Lite Extender, 8 In 4 Out Stage Pocket Box, 4/8-Port HDMI Matrix/Splitter/Switcher & Armoured Audio Cable, Extension Cable Assy 10M with Male Female Connector, Shoulder Bar And Nuts Installation Kit, Connectors & all interconnects,etc: *Snake Cable: 16 Core Snake Cable in mtr *Microphone Cable: Mic Cable -25/42 in mtr *8 In 4 Out Stage Pocket Box: as per site requirement. *HDMI HDBaseT-Lite Extender: as per site requirement. *Ultra Flexible Premium HDMI or VGA Cable:Conductor Gauge-26AWG; Tinned Copper; Gold plated connector; Rating-UL VW-1 (Flame rate), CSA. quantity, length (20mtr/10mtr/5mtr/3mtr/2mtr); *Precision-terminated Shielded Twisted Pair NEC CMP rated, Plenum Cables 75feet; *Extension Cable Assy 10M with Male Female Connector: *PVC conduits(ISI marked): laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Armoured Audio Cable for Speaker & Microphone, Connectors & all interconnects, etc, quantity as per site requirement. Make (Connectors): Swisscraft/Neutrik/Amphenol Make (Snake Cable): Krystals/Belden/Sommer/Extron/Lightware/Crestron Make (Microphone cable): Krystals/Belden/Sommer/Extron/Lightware/Crestron Make (HDMI Cable): Extron/Lightware/Crestron/Krystals/Belden/Sommer Make (PVC conduits): Precision/Presto Plast/Supreme 72 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification: Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D-LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 440cd/m^2 or nits or higher, Contrast Ratio (Static): 1200:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less,; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Connectivity: HDMI 2.0, USB2.0, DVI-D, Display Port, M3, RJ-45, RS232C; Networking Interface: Integrated Gigabit 10/100/1000 & Dual Band Wi-Fi 802.11 a/b/g/n/ac; Video Input: HDMI 2.0, Audio In: Stereo mini Jack, DVI, HDMI; Audio Out: Stereo mini Jack; Power consumption typical (w/h): as per OEM, Operating Temperature: 0℃~ 40℃, 24x7; Humidity: 10~90%, IP Rating: IP 5x; Others: auto source switching; Certification: BIS, FCC UL. Including HDMI Cable and Wall mount/Floor stand/swivel fixing arrangement with All other Accessories as per site requirement. Make: Panasonic, Delta, Sony, Samsung, Sharp, LG Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 73 Supply of Webcam with inbuild mic and speaker having minimum technical specification: Camera : 3.68 Megapixels, 1/2.82K (2560*1440), 1080p30, 720p304X ePTZField of view: 94°, Horizontal: 90°High Quality Glass Lens Support 3D De-noising, Automatic White Balance Auto Framing with Face Tracking Function, 50dB USB 2.0, USB Type A, USB Video Class Supported 1.8 Meter Cable, Support MJPEG / H.264, Built In 2 Element Array Microphones with Acoustic Echo Cancellation 90Hz~16kHz, 10 -33dBFS Inbuilt Speaker with Phase Inversion Hole, 100Hz~20kHz, Windows 7, Windows 8, Windows 10 or later; Mac OS 10.10 or later, 10°C to 50°C, 10% to 90%, 230 x 60 x 56 mm, 330g, ZOOM / We Chat / Skype / Face book / WebEx / YouTube / Face Time / Go To meeting /Blue Jeans / Vidyo / Microsoft Teams & many more. Supports OBS Studio, Basic Standard Definition Video: Processor = 2.0 GHz, RAM = 1GB, High Definition Video: Processor = 2.4 GHz, RAM = 2GB, Basic Standard Definition Video: Processor = 2.4 GHz or higher, RAM = 2 GB or higher Make: Adonis, Logitech, Yamaha, BanQ Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 74 Supply of Mini Desktop Computer having minimum technical specification: Processor: Intel Core i3-12500 or Higher; Chipset: Intel Q670or higher, 2 DIMM slots or higher and minimum 4 PCIe series expansion slots; RAM: DDR4 8(1x8) GB 3200MHz with support for expansion upto 64 GB; Hard Disk: 1 x 512 GB Gen4 M.2 SSD or higher; Integrated Graphics: UHD/4K Intel Graphics 630 or higher; Dedicate Graphic Card: 4GB DDR5 Nvidia GeForce 1060i; Management: Intel vPro (Optional); Operating System: Windows 10 Pro 64Bit preloaded with latest build along with recovery media; Networking Interface: Integrated Gigabit 10/100/1000; Connectivity: Integrated Dual Band Wi-Fi 802.11 a/b/g/n/ac & Bluetooth 5.0 Combo or higher; Optical Drive: Integrated RW/DVD Drive (Optional); Display: nill ;Audio: Integrated Audio controller with Internal speaker; Keyboard: Standard Keyboard; Mouse: Optical Scroll Mouse; USB/HDMI/VGA Ports: Integrated HDMI Port: Minimum 1 no, Integrated VGA / Display Port: Minimum 1 no, Integrated USB Port: Minimum 8 nos (Min 4 nos of 3.1 Gen-1), out of 8 Nos minimum4 in front, 4 in back and should be easily accessible; Security: Hardware based TPM 2.0, chassis Intrusion switch / Intrusion Sensor with chassis physical security cable lock slot; SMPS: Minimum 260 W or above; Cabinet Form Factor: SFF/Tower; Certification and Compliance: Windows 10 Pro Certification for the quoted desktop model, EPEAT India for the quoted desktop model, Minimum Energy Star 5.0 & TCO Certification for both Monitors and Desktop model, ISO 9001 and 14001 Certified for OEM India Unit; Inclusive of MOUSE Pad, Dust Cover. To be Installed at Site. Make: Dell, HP, Acer, Lenovo Warrenty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 75 SITC: 06 KVA Online UPS (1-ph input, 1-ph output) System with 6240 VAH (Min) Back-up Battery, Rack, Links, Cables & Other Accessories. Technology: Digital Signal Processing (DSP) controlled Microprocessor based technology true On-line, Hot-Standby Mode,Input: 1-phase, 220/230/240V, 176 ~ 280 Vac (full load) ; 80 ~ 175 Vac (50% ~ 100% load), >0.99PF (full load), 50Hz ± 5Hz, Current Harmonic Distortion <3.0%; Output: 1-phase, 220/230V/240V ± 1%, > 0.90PF (full load), 50 Hz ± 0.1Hz; Harmonic Distortion (input current): < 3% (linear load); Crest factor: 3:1; Efficiency (AC/DC) Overall is (Online Mode) >=93% at full load; Operating Temperature: 0 ~ 55°C; Relative Humidity: 5 ~ 95% (non-condensing); Battery: SMF, 12 V, Mono Block batteries. The UPS battery shall be of Advanced Glass Mat Valve Regulated Sealed Lead Acid Battery Construction type (AGM or VRSLAB) in ABS Flame Retardant (UL94V-O) grade (UL 2436) spill containment casing to meet UL 62368-1/IEC 62133 or equivalent standards type to obtain a full rated load battery backup, standard FR DC Cable; Battery set: Complete with self standing cubicle or cabinet; Certification: CE, BIS; Type Test Report: ISO 9001, ISO14001,OSHAS18001;Display: LCD display and LED indicators; Make: Schneider, APC, DELTA, Vertiv, Eaton, Numeric, Hitachi, Avo, Orion; power oneMake Battery: Amararaja-Quanta/Exide, Model: Rack Mount Only. Warranty: 03(Three) years on UPS & 03(Three) years on Battery onsite comprehensive OEM warranty with parts and service except force majeure. 76 SITC of 02 KVA Rack Mount Online UPS (1-ph input, 1-ph output) System with 336 VAH (Min) Back-up Battery, Rack, Links, Cables & Other Accessories. Technology: Rack mount, Digital Signal Processing (DSP) controlled Microprocessor based technology true On-line, Parallel Load Sharing Mode (1+N) configuration enabled only; Input: 1-phase, 220/230/240V, 176 ~ 280 Vac (full load) ; 80 ~ 175 Vac (50% ~ 100% load), >0.99PF (full load), 50Hz ± 5Hz, Current Harmonic Distortion <3.0%; Output: 1-phase, 240V ± 1%, > 0.9PF (full load), 50 Hz ± 0.1Hz; Harmonic Distortion (input current): < 3% (linear load); Crest factor: 3:1; Efficiency (AC/DC) Overall is (Online Mode) >=95% at full load; Operating Temperature: 0 ~ 55°C; Relative Humidity: 5 ~ 95% (non-condensing); Battery: SMF, 12 V, Mono Block batteries. The UPS battery shall be of Advanced Glass Mat Valve Regulated Sealed Lead Acid Battery Construction type (AGM or VRSLAB) in ABS Flame Retardant (UL94V-O) grade (UL 2436) spill containment casing to meet UL 62368-1/IEC 62133 or equivalent standards type to obtain a full rated load battery backup, standard FR DC Cable; Battery set: Complete with self standing cubicle or cabinet; Certification: CE, BIS; Type Test Report: ISO 9001, ISO14001,OSHAS18001;Display: LCD display and LED indicators; Ref. Make: Schneider, APC, DELTA, Vertiv, Numeric; Ref. Make Battery: Amararaja-Quanta/Exide, Model: Rack Mount Only. Warranty: 03(Three) years on UPS & 03(Three) years on Battery onsite comprehensive OEM warranty with parts and service except force majeure. 77 SITC of UPS sub DB 250V, 20 way SPN MCBDB with Sheet Steel Enclosure Double Door with IP-42/43 Protection with 2 x DP Isolator as Incomer and SPMCB (C-curve, 10Ka) as outgoing : 2+18 way Enclosure (607711 or Latest), 2 x 100A DP Isolator, 16 No.16A SPMCB Make: Legrand, Hager, SIEMENS, L&T Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 78 SITC of UPS Power Pointto Network Racks & Desktop Workstation, Display, Biometric Attendance System at different location through suitable power networking with 4/6 Sq mm 3 core FRLS PVC insulated unarmoured ISI marked copper cable (maximum 80mtr or as per site requrment), 3x16/6A Sockets with Separate 3x16/6A Switch and 1 x 6/16A MCB mounted in 16SWG GI box with Bakelite top cover complete. Switch, Sockets & MCB Make: Legrand, Hager, SIEMENS, L&T, Wire Make: Polycab, Mescab, Havells, Finolex Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 79 ADD GST 18% 80 ADD LWC 1%
Contract Date: Mar 19, 2025 Contract Value : ₹ 82.23 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
48.
Agriculture #6837440 AOC
e-Tender for procurement of Laboratory Instruments/ equipment/ appliances for the College of Veterinary Sciences & Animal Husbandry under the NEC funded project entitled: “Strengthening of Laboratories at College of Veterinary Sciences & A. H., R. K. Nagar, West Tripura” for the year 2024-2025 and 2025-2026 (Rate contract for two years)- 1 Ultrasound machine with multi-frequency colour Doppler--• Display modes: B, dual B, quard B, B+M, M, CW, PW, colour and directional power Doppler• Range: 0-2 to 0-24• Display monitor: High resolution 15” LCD display with wide view angle, Probe connector:1-3• Image Adjustment: Gain: 60-120 dB, Dynamic range: 20-120 dB, Acoustic power: L/M/H, M sweep speed: 4 steps• Storage: At least 160 GB integrated hard drive, 2-3 USB ports, Still image format: JPEG, BMP, Cine loops storage format: any• General measurements: For B mode: Depth, Distance, Circumference, Area, Volume, Ratio.For M mode: Distance, Time, Heart rate. For PW/CW mode: Velocity, Acceleration, Heart rate• Special requirement: Reproductive software for Bovine, caprine and canine.Measurement andCalculation software package• Dimension: Around 410 mm (W) x 355 mm (H) x 80 mm (D)• Weight: 4 to 8 kg• Language: English• Power source: 100-240 AC• Other accessories: Convex array transducer and Linear transducer 3.5 MHz and 5.0 MHz forabdominal, MSK, Nerve, Obst. & Gynae. application; Transrectal linear transducer 7.5 MHz (For large animals).• Traveling case, Trolley• For Veterinary Use• Warranty: 3 years (on-site) 2 Hot Air Oven--Triple walled, Temperature ranges from ambient plus 5oC to 200oC, controlled by Microprocessor Based PID Controller having +/- 1oC accuracy. Inner chamber made of SS Sheet & Outer of MS Sheet. 3” thick glass wool insulation is provided between the walls and the door. Supplied with blower & 3 nos. wire mesh shelves with over temperature thermostat;Temperature sensor- PT100 or better. 220 Volts, AC. Capacity: 300-350 Litre; Warranty: 3 years (on-site) 3 BOD Incubator--• Capacity: 1000 L• Temperature Range: Ambient +5°C to +80°C• Temperature Uniformity: ±0.1 °C• Temperature Control: ±0.1°C• Chamber: Stainless steel• No. of Shelves: 4 -6• Shelves: Perforated stainless steel• Dimension: LxWxH(cm)- 80x80x180• Number of doors: 1-2• Load per rack (kg): 25-60• Light Facility: Door side/wall sides• Inside door: Transparent acrylic• Outside door: Well insulated• Display Digital display• Warranty: 3 years (on-site) 4 Laminar flow--• Cabinet made from mild steel• Pre-Filter Assemblage for Multi-Dispose particle predominantly in the size range of 5- 20 microns• HEPA Filter - 0.3 microns• Sealed white light • UV- light • Stainless Steel Work table • Front Door• Gas cock • Anti Vibration Leveling leg / Castor wheels• Extra power outlet switch • Size : 4 x 2 x 2TECHNICAL FEATURES:• AIR FLOW: Designed for 0.45m/s to 0.65 m/s• PRE-FILTERS: Size : 800 x 400x 50• Type : Flange type • Media : Synthetic, Non-oven Polyester fibre, Washable type • Casing : M.S.Powder coated• Gasket : Neoprene • Retention : 5 Micron• Efficiency : 95% • Pressure drop : 6 to 8 mmHEPA FILTER :• Size : 1200 x 610 x 75 mm - 1 no (4 feet unit)• Type : Box type, seperator type• Media : Ultra clean glass fibre paper- imported• Casing : M.S.Powder coated• Gasket : Neoprene • Retention : 0.3 Micron • Efficiency : 99.97%• Pressure drop: 25 mm of W.c.MOTOR -BLOWERS• Volts : 230 V • Hz : 50 • HP : 1/3 (4 - feet unit) • Amps : 3.5• Watts : 250 • RPM : 1440ILLUMINATION: 40 watts Fluorescent tubes NOISE LEVEL: 65 ± 5 dbVIBRATION LEVEL: less than 2.5 um (0.0001) POWER SUPPLY: 230 v AC, 50Hz, Warranty: 3 years (on-site) 5 Biosafety cabinet- Class –II, A2 (Laminar Flow)--• Product Type: Class II, Type A2 Bio Safety Cabinet• Exterior dimensions (W x H x D) should be 63 x 61.8 x 31.5 inch• Interior dimensions (W x H x D) should be 59.1 x 30.7 x 24.8 inch• Filter Specification should be H14 HEPA EN 1822, 99.995% @ MPPS• Weight should be 507 lbs• Electric requirement should be of Voltage 120 V and Frequency 60 Hz• Certification NSF/ANSI 49, UL, CE• Lighting power should be >120 fc with Two 3 inch plugged cable ports, one oneach side wall ,theReceptacles should be of 2 GFI duplex .There should be Service valves Up to 6 total (3 on each side wall)• 8 inch front opening with Sound pressure level should be <64 dB Energy consumption, operating set point 2 should be 280 W, Energy consumption,Night Set-Back mode should be 120 W, Heat output, operating mode (non-vented) should be 955 BTU/hr, Heat output, Night Set-Back mode (lights off, non-vented) should be 410 BTU/hr, Exhaust/inflow air volume 344 cfm, Exhaust volume, thimble ducted 448 cfm.• Armrests must sit above front air intake grill should be easily removable• Programmable UV light extends bulb life and saves energy ,Available UV disinfection cycle• Adjustable UV exposure time saved in memory to facilitate consistent operation• Safety interlock to prevent UV illumination when window is open• One Voltage stabilizer (10KVA) has to be supplied with the machine from reputed manufacturer.• Optional:-Virus burn-out facility.• The machine should have onsite Warranty 5 years. 6 Deep Freezer (- 20oC) (Vertical)--• Single door upright freezer, Frost Free• Capacity(L/ Cu.ft): 371• Shelf/Drawer : 7• Temp: -16°C -25°C with microprocessor based Temperature controller• Insulation : PUF• Sensor for malfunction :Yes• Sensor for Temperature Controller Malfunction :Yes• Lock : Yes• Provided with Stabilizer• Warranty :2 years (on-site) 7 Deep Freezer (- 20oC) (Horizontal)--Horizontal, 500-550 litre capacity, double door, 5- star rating, 100 % cooper wire, Temp: -20°C,Warranty: 1 year (on-site) 8 Autoclave--Capacity: 75ltrs, Vertical, Inner Dimension (Dia. x Length): 16*24 inch (400*600 mm), Watt:4KW, Operation Mode :Fully automatic (Digital Controller with Automatic Pressure Release Valve), Construction: Double Walled Inner Chamber Stainless steel 304, External chamber: Stainless steel 304 Lid Stainless steel 304,Ring & Stand: Stainless steel 304 Heater Immersion heater, Gasket: High temperature silicone rubber gasket (Joint less), Locking system Radial locking mechanism w/ pedal lifting device,Temperature range: 121°C to 126°C Temperature accuracy ±1°C• Temperature sensor: PT100• Controller :• Digital temperature controller• In-built digital timer 0-60 minutes• END of sterilization buzzer alert • Digital display of pressure• Sensor broken indication • Pressure: 15 to 20 psi• Steam release : Automatic steam release after sterilization• Release valve: Solenoid valve • Pressure display: Dial type pressure gauge• Pressure control: Automatic pressure control switch• Safety• Over pressure safety valve • Automatic vacuum breaker• Low water level cut-off sensor • Basket: Wire mesh basket• Power supply:220 Volts 50Hz • Water Inlet Valve• Directly pour into the chamber• Standard accessories:• Water level indicator (glass)• Water drain valve• Warranty: 3 years (on-site) 9 Biochemical Analyser--• Microcontroller based semi-automated analyzer to perform routine biochemistry tests (end point, fixed time & kinetic chemistries, multi standard curve calibration & memorization). For estimation of biochemical parameters for veterinary clinics.• Support tests of common domestic, pet & laboratory animals.• Min. 20 most common tests fixed, 20 more can be defined by user.• Bichromatic optic system with different wavelengths.• Should have 8 static interference filters (not filter wheel) with web length selectable from 340- 670nm.• 3 level QC with Levey-Jennings graph.• Support keyboard and mouse with USB port facility to transfer test results from analyzer to computer.• Edit Pre-programmed calculations for kinetic and endpoint assays.• Real-time reaction curve display.• Should be compatible with any commercial Kits/reagents other than OEM reagent as consumables.• Data storage for Min-5000 samples.• Instrument should be CE certified/ USFDA approved.• UPS: 1,000 VA, 360 W, with least 15 minute back- up• Should provide 3 year Warranty and should have OEM Service engineer posted at Tripura forregular prompt service(Documents to be enclosed) 10 Electrolyte Analyser--• Sample to be tested: for Na+, Cl-, K+, Ca Blood serum, plasma, Urine.• Semi-Automatic, Minimum aspiration volume not more than 100 micro litre.• Bio-sensor technology based• Large graphic display with touch screen,• Data storage min-1000 samples• Veterinary specific• Process time:≤60 sec• Should have USB port for attaching external Keyboard and mouse supplied should have RS232/LAN port for external device.• Instrument should be CE certified/ USFDA approved.• UPS: 1,000 VA, 360 W, with least 15 minute back- up• Should provide 3 year Warranty and should have OEM Service engineer posted at Tripura for regularprompt service (Documents to be enclosed) 11 Urine Analyser--• Automatic Veterinary Urine Analyzer strip based• Parameters - 10 Parameters(Glucose, Protein, pH, Specific Gravity, Leucocytes, Blood, Bilirubin, Urobilinogen, Ketone & Nitrite)• Measurement Principle - Three Wavelength Reflectance photometry Method• Attached waste bin• container• Reaction Time - 60 sec per test• Memory - 2000 Tests• Display - LCD Touch Screen, with in-build thermal printer.• Interface - Micro USB, Blue tooth etc• UPS: 1,000 VA, 360 W, with least 15 minute back- up• Should be supplied with 500 strips.• Warranty :3 year (on-site) 12 Clinical Haematology Analyser (Five part)--• Fully Automatic Veterinary Hematology Analyzer (Different species of Domestic & pet animals)- 5 Part,• Method: Electrical Impedance, Light• Scattering, Flow Cytometry, / Calorimetry.• Minimum Parameters (>19 items): WBC, LYM#, MON#, NEU#, EOS#, BAS#, LYM%, MON%, NEU%, EOS%, BAS%, RBC, HGB, PCV, MCV, MCH, MCHC, PLT, MPV.• Display screen, 2 histograms and 2 scatter grams• Storage: Minimum 5,000 sample results including histograms, scattergrams and patient information.• Calibration: Manual and Auto-calibration• Maintenance Friendly:1) Auto-cleaning of sample probe and tubes2) Automatic fault processing function• Sample consumption: 20uL• For Domestic, Pet &laboratory of animals: such as analysis of samples of Cow, buffalo, sheep, goat, cat, dog, pig, rabbit, rat etc.• Consumables: Supplied Along with a full set of reagents/chemical sets.• Efficiency: 60 samples per hour• Accessories: keyboard, printer, USB etc.• UPS: 1,000 VA, 360 W, with least 15 minute back- up• Should provide 3 year Warranty and should have OEM Service engineer posted at Tripura forregular prompt service (Documents to be enclosed) 13 Large Animal Sling--Animal lifting sling, capacity: 1,000 Kg, Fixed & movable with wheel, Iror/ mild steel made, winch gear box facility for lifting, cow handling belt.Size(Min.):7.5x4x4 Ft, Warranty :3 year (on-site) 14 Animal Examination table--4 ft x 2 ft x 32 incl (height) with upper top made withstainless steel solid sheet having slope with fluid drainage facility, four legs made of rust resistant iron. 15 Video Endoscopy Machine--• Should be veterinary specific & suitable for companion (Pet) animal as well as large animal.• Gastroscope should have integrated video camera with light source.• Should also have medical colonoscope.• Insertion tube should be of extremely short tip withouter diameter of 8.4 mm, working length should be 1050 mm, working channel should be 2.8 mm.• Should have 4-way deflection (upward 210 °, downward 90°, left 100° and right 100°).• Field of view should be 120 °.• Depth of view should be 3-100 mm.• Should be provided along with a Carrying Case• Caps for Working Channel, Irrigation• Tube, Cleaning Brush, Cleaning Valve.• Should have Biopsy forceps and foreign body forcep.• HD camera system should be compatible with both flexible and rigid endoscope.• Should have internal Medical grade recorder for Capturing Full HD.• Patient’s information should be editable and displayed in monitor.• Should be supplied with Medical Grade Monitor.• Should be supplied with trolley.• UPS: 1,000 VA, 360 W, with least 15 minute back- up• Should provide 3 year Warranty and should have OEM Service engineer posted at Tripura for regularprompt service (Documents to be enclosed) 16 Small Animal USG Machine--• It should have minimum 15’’ LCD monitor with 30 degree tilt function Compact and streamlined design.• It should have dual universal transducer connectors• There should have backlit keyboard• It should have 1hour uninterrupted scanning with rechargeable battery• It should have Scanning modes like:- B, B/B, 4B, B/M, M/P/W mode• The Pulse wave graph should appear in color• It should have Quick image optimization with one- click button• It should offer Instant full screen zoom with one- click• It should have offer Patient database review and analysis platform• It should have Storage capacity of minimum 1 TB• It should offer Tissue Harmonic Imaging on all probes• It should have Smart 3D enabled on all the probes. • It should offer panoramic imaging• It should have 256 grey scale • It should offer speckle reduction feature• It should have Multiple image formats: BMP, JPG, DCM, AVI, DCM, CIN• It should have Specialized measurement and analysis packages for different animals and • dedicated Veterinary transducers with anti-decay surface and longer cable• It should have Professional Package for Veterinary Use and Veterinary information management, Veterinary body mark, Veterinary comments and Veterinary OB table• It should be Supplied with two probes:• One Micro convex probe (Freq. 5-8.5 Mhz) suitable for small animal abdomen and cardiac • One Linear probe (Freq. 5-10 Mhz) suitable for small parts scanning.• The system should be warranted for minimum one year.• They should have a service centre with service engineer for support at Tripura.• The brand quoted should be time tested and have its presence and installation base of at least 20 units across the country at the veterinary institutes by the bidder only irrespective of model installed by the bidding company itself. Please attach supply orders/installation report or performance certificates in support of your bid.• The product offered should be CE marked.• UPS: 1,000 VA, 360 W, with least 15 minute back- up• Should provide 3 year Warranty and should have OEM Service engineer posted at Tripura for regular prompt service (Documents to be enclosed) 17 Spectrophotometer (Double Beam)--• Sample Cell Holder: 8 Cell Holder • Programmable 10mm• Bandwidth: 1nm • Reference Cell Holder: 10 Cell Holder• Optical System: Double Beam(1200 Lines/mm Grating)• Wavelength Range: 190-1100nm • Bandwidth: 1nm • Wavelength Accuracy: ±0.3nm• Wavelength Repeatability: ±0.2nm • Scanning Speed: Fast, Medium & Low• Photometric Accuracy: ±0.3%T • Photometric Repeatability: 0.2%T• Photometric Range: -0.3-3A,0-200%T,0-9999C • Stability: ± 0.001 A/h @ 500nm• Baseline Flatness: ±0.001A/h • Noise: ±0.001A/h • Stray Light: <0.05%T @ 220nm,360nm • Data Output Port: USB • Printer Port: Parallel Port • Display: LCD• Light Source: D2 Lamp & Tungsten Halogen Lamp (W Lamp)• Detector: Silicon Photodiode • Power Supply: AC 220V,50/60Hz• Standard Accessories- Quartz cuvette with 10mm path length 4 numbers,• Local Accessories- PC with UPS is to be offered with the system• Warranty: 3 year (On-site) 18 ELISA Reader--• The Light source should be of Quartz halogen lamp 6 V/10 W• The Wavelength range should be 340–850 nm• There should be 8-position filter wheel with 3 filters 405 nm, 450 nm, and 620 nm filters installed with additional filter of 492nm• The Filter half-bandwidth should be 3–9 nm• The Read-out range should be 0–6 absorbance units (AU)• Linearity (at 405 nm) should be ±2% (0–3 AU, 96- well plate)• The Resolution should be 0.001 AU• The Accuracy (at 405 nm) should be ± 1% (0–3 AU) or ±0.003 AU (whichever is greater)• Co-efficient of variation of Precision (at 405 nm) should be ≤0.2% (0.3–3 AU)• Measurement speed should be 7 sec (fast mode, 96- well plate) and 13 sec (normal mode, 96-well plate). • Linear shaking should be slow, medium, and fast modes• The machine should have High-contrast colour display (480 x 272 pixels)• There should be On-board display or PC control user interface• Internal memory (stand-alone) of up to 99 assay protocols and 100 test results (96-well plate) should be there• There should be USB port for PC and USB port for data export to USB memory device• The main input should be of 100–240 V (50/60 Hz)• The Power consumption should be of Max. 100 VA, 8 VA in standby mode• The Overall dimensions (H x W x D) of the product should be 8.7 x 11.4 x 15.7 inches (22 x 29 x 40 cm) • The weight of the product should be 8.5 kg (18.7 lb)• The machine should have Regulatory conformance of 2004/108/EC (Electromagnetic Compatibility Directive, EMC), 2006/95/EC (Low Voltage Directive), 2006/42/EC (Machinery Directive), FCC Part 15, Subpart B/Class B, 2011/65/EU (RoHS Directive), 2012/19/EU (Waste of Electrical and Electronic Equipment)• Suitable Software for result analysis should be supplied along with the machine for use with the PC.• The machine should have onsite warranty of 3 years.• One Additional ELISA Microplate washer has to be supplied with the machine with the following specifications• The washer should be of 96-well Plate format with One number of wash buffer bottles• One number of wash buffer bottle (2 litre) and one waste bottle (2 litre) whould be supplied with the machine• 1 x 8 wash head should be included• The range of wash volume should be 50–1,000 μLwith Prime/rinsing volume 5–100 mL and Dispensing volume 50–400 μL• The Residual volume should be <2 μL• There should be USB port for data transfer• The Dispensing accuracy should be less than <5% error for 300 μL and Dispensing precision <3% (CV) for 300 μL• Number of wash protocols to be saved should be Up to 99• The Dimensions (H x W x D) of the machine should be 13.6 x 15.2 x 9.4 inch.(34.5 x 38.5 x 24 cm)• The Weight of the machine should be 8 kg (17.6 lb.)• The machine should have onsite warranty of 3 years.• Machine should be supplied with one 2 KVA online UPS of reputed manufacturer• Additional data display and storage with following specifications:• Processor: i7-1255U (3.50 GHz up to 4.70 GHz) 12MB & 10 Cores // RAM: 16GB, 2x8GB, DDR4, 3200MHz // Storage: 1TB HDD + 512GB SSD• Software: Win11+MS Office 21 + McAfee 15 Months• Display: 27.0 FHD WVA AG Narrow Border Touch, Graphics: NVIDIA GeForce MX550 (2GB GDDR6), Keyboard and Mouse: Wireless, Warranty: 3 Years Onsite Hardware Service• Ports: 3 USB 3.1 Gen 1 ports with Power on/Wake- up support, 1 USB 3.1 Gen 2 port with Power Share, 1 USB 3.2 Gen 2 (Type-C) port, 1 universal audio jack, 1 HDMI 1.4b port, 1 HDMI-in 1.4b port, 1 RJ-45 port, 1 SD-card slot• Features: Pop-up FHD Camera with Tilt / 2x5W speakers / Bluetooth Speakers / Swivel Monitor / Type C port• Warranty: 3 year (on-site) 19 Incubator (Bacteriological)--• Temperature Range: 5°C above ambient to 60°C• Temperature Accuracy: ± 0.5°C • Temperature uniformity: Better than ± 2°C• Standard Models: Inner Stainless steel 304, 0.8 mm &Outer mild steel, 1.0 mm powder coated • Capacity: 200 Ltrs. • No. of Trays: 3 • No. of Doors: Single• Control System: Microcontroller based temperature indicator cum controller with Digital display and PT100 sensor. • PC Interface: ThroughRS-485• Memory: 500 Records• Alarm: Audio Visual Alarm if the temperature deviates from the preset temperature• Heating System: U shaped S.S. Nichrome wire air heaters• Air Circulation: Motor and blower arrangement to have uniformity of temperature under loaded condition. • Insulation: 3 Thick CFC free PUF Insulation.• Lighting: Interior illumination for working area.• Observation Door: Inside see through unbreakable acrylic door• Validation Port: 50mm validation Port with silicone rubber seal to insert sensors for validation purpose.• Trays: Specially designed solid stainless steel wire mesh trays ensure even temperature distribution• Other: Castor wheels, mcb, adjustable tray height arrangements, heavy duty latch with lock & key • Power: Works on 230V AC single phase 50Hz.• Safety feature: Additional safety thermostat to cutoff the air heater in case of over shoot of temperature • Certifications: ISO9001:2008, ISO 13485:2012• Documentation: LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports• Warranty: 3 years 20 Monopan Digital Balance--• Display: LED touch screen• Special built-in- applications:net total, totalizing,statistics, weighing, massunitconversation, animal weighing.• Protection: chemical resistant finish• Password protection: single level password protection• Anti-theft lock: Kensington lock and lockdowncapability for cable or chain.• ID creation: sample ID and batch ID creation possible.• Interface:-USB type C interface - Industry Proof RS232 9-pin interface- Backward Compatibility (by Using RS232 port)- Data transfer: direct data transfer to Microsoft windows programs.• Weighing pan: best repeatability with rectangular weighing pan.• Language: English.• Technical specification:- Weighing capacity: 220g- Readability: 0.1mg- Repeatability: 0.08mg- Linearity:0.06mg- Typical stabilization time:<1.5sec- Typical measurement time : <2 sec- Weighing chamber height :240mm- Weighing pan size:90mm- Warranty: 02 years (on-site) 21 Physiograph--Standalone unit having coloured TFT display for displaying online and offline recording data. Systems have sic couplers fitted in as single unit easy to carry. System shall have Eight transducers (Force, Pressure, Volume, Respiration, Temperature, Pulse, Respiration Belt and Isotonic).Facility to store recording data and review the same on TFT. Interface to the computer – Through USB. System provided with software to review and printing the recorder data from PC. Accessories like ECG electrodes, EEG electrode, Bio Potential Junction Box, EMG disc electrodes, Ground electrode, EEG Paste, ECG gel, etc. should beprovided. Warranty :3 year (on-site) 22 Micro haematocrit Centrifuge--Speed range of 200-14,000 rpm, max. RCF 18,620 xg. Independent control of speed and time. Easy operation with intuitive menu and easy-to-read display. Included hematocrit rotor: 24 capillary capacity, max. speed of 12,000rpm. Optional tube rotor: 24 place 1.5/2mL capacity.Warranty :3 year (on-site) 23 pH Meter--• pH Range: -2.00 to 14.00 pH• Resolution/ Accuracy: 0.01 pH/± 0.01 pH• ORP Range : ± 2000 mV • Resolution/ Accuracy:(± 199.9 mV) / 1 mV (beyond) ± 0.2(± 199.9 mV) /± 2 mV (beyond)• Temp. Range: 0 to 100 °C (32.0 to 212.0 °F)• Resolution/Accuracy: 0.1°C(0.1 0 F)/±0.3 °C/±0.5°F (0 to 70 °C)• ATC: Yes (0 to 100 0 C)• Buffer Options USA : pH 1.68, 4.01, 7.00, 10.01, 12.45 ,NIST: pH 1.68, 4.01, 6.86, 9.18 , 12.45 • No. of pH Calibration Points: 5 points• Built-in Electrode Arm: Yes • Memory : 100 Data sets• Electrode: Included, single junction pH electrode • Temp. Probe: Included• Power Requirements: Included, 100 /240VAC,SMPS Power Adapter with US/UK/EUR/Japan plug ,9V,6W, CENTRE +ve• Warranty: 3year (on-site) 24 Flame Photometer--Range : Na: 0 – 100 ppm,K : 0 – 100 ppm, Ca: 15 – 100 ppm, Li: 10 – 100ppm (Optional). Sensitivity : Na: 5 ppm, K : 5 ppm, Ca: 10 ppm Li: 10 ppmAccuracy : + 2% upto 40 ppm,+ 5% above 40 ppmWarm up time: 10 minutes. Power: 230 V + 10% AC, 50 HzWarranty: 02 years 25 Binocular Microscope--• STAND: Single Mould, die cast sturdy stand with anti rust material with textured paint, with ergonomic extended base for hand rest and greaterstability, anti-fungal mould treated.• VIEWING BODY: 30° inclined Siedentopf Binocular tubes, 360° rotatable with IPD 50- 75mm. Anti-fungal mould treated.• EYEPIECE: Wide field paired eyepiece, high quality, and achromatic 10x/20 mm with dioptric adjustment. Antireflection coated & Anti-fungal mould treated.• NOSEPIECE: Backward angle, Quadruple revolving Nosepiece (ball bearing type), with soft rubber grip.• OBJECTIVES: Infinity Plan Achromatic objectives, antireflection & anti-fungal mould treated, 4x/NA 0.10, 10x/NA 0.25, 40x/NA 0.65SL, 100x/NA 1.25 (SL, Oil)• STAGE: Double layered graduated mechanical scratch proof rectangular stage size 142 x 133mm, X/Y cross travel range 76 x 54mm. Co-axialcontrols, spring clip, Low drive right hand movement controls, double specimen holder, anticorrosive coated.• COARSE & FINE FOCUSING: Focusing Co-axial coarse and fine focus on ball drive system and brass metal gears for smooth operation with torqueadjustment on one ring side.• Warranty :3 year (on-site) 26 Trinocular Microscope with Photography Unit--Microscope:Type: Upright bright field compound Trinocularmicroscope with Koehler Illumination Control Display: 5-element display on either sideof the stand and long-life blue LEDs which is well readable from several meters distance.Illumination: 3W LED warm-light, 3200K, lifetime-25000 hours, Homogeneous fieldillumination 20mm, can perform plug-on swivelling mirrorOptical system: Color-corrected infinity opticsEyepiece: A pair of e 10x suitable for spectaclewearers and retro fittable eyepiece with pointer;Eyepiece with field of view of 20mm; Eyepiecessecured with setscrews against unauthorized removal.Objectives: Plan-Achromat: 4x, 10x, 40x, 100x,with 4-position nosepiece tilted back and objectivessecured against unauthorized removalCondenser: Focusable and centreable Abbe condenser 0.9/1.25Viewing Tube: Trinocular Tubes (50%:50%) with25° angle and field of view 20 mm; Viewing with30° angle and field of view 20mm for Heightadjustable siedentopf tube; Siedentopf up anddown position for 2 different viewing heights.Stage: Mechanical reckless stage with Long-livedstage surface; With well-readable vernier and robustcontrols; Stage size- 140x140, travel range 75x40;Extremely stable stand to broad base and low center of gravity.Power: With power unit integrated into stand byway of a parking position with cable storage in thestand rear wall. Ergonomic shape for convenient,safe carrying; With IEC adapter for conversion into abench-top power pack; With external unit that is easyto change in case of defect ; With Power of 100- 240V and 50-60Hz.Carrying Handle: With carrying handle that iscompletely integrated into stand; With ergonomicshape for convenient and safe carrying Dust cover: With dust CoverAnti-fungus treated optics: Must provide anti-fungus certification from manufacturer.• Should provide schematic diagram of microscope• System should be ISO and European CE Certified (provide document)• After Sales & Service Support should be available in Agartala (provide contact no. and address).Warranty: 5 years warranty for microscopeDigital Imaging System:• A 8.3 MP Digital Microscopy Camera with• facility for standalone operation as well as in PC.• Facility available for Live Image on screen• Display Direct image• Recording and Capturing along with Image• Analysis Software• Camera package shall contains the following accessories:o USB 3.0 hub Type-C,o USB 3.0 flash drive, Type-C and Type-Ao USB 3.0 cable Type-C to Type-Ao Power <(>&<)> signal cable camera to microscopeo stand with suitable Power adapter- Export into ZVI, BMP, GIF, JPG, PNG, TIFF,HDP image formats.- Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K)Selectable Resolution: 3840 x 2160 and Full HD (1080p) = 1920 x 1080,Pixel size: 1.85 μm x 1.85 μm, Effective Area: 7.1 mm x 4.0 mm, IR filter.- Entire System i. e. Microscope, Camera and Software shall be from same manufacturer.- Warranty: 2 years (on-site)Additional Data Storage Unit:• Operating System: Windows 11 Home• Processor: 12th Generation Intel Core i5 (up to4.4 GHz)• Memory:8 GB DDR4-3200 MHz RAM• Storage: 512 GB SSD storage• Graphics: Intel® UHD Graphics 730• Moinitor: size- 60.5 cm, FHD (1080p) with IPS display• Pointing Device: Wired Mouse• Keyboard: Wired• Should include Genuine Microsoft Office Home & Student 2021 Lifetime Subscription• Warranty: 3 years (on-site)• 03 years Quick Heal antivirus protection subscription• UPS: 1,000 VA, 360 W, with least 15 minuteback-up 27 Micropipette set--• Kit should includes 0.2-2, 2-20, 20-200 & 100-1000 ul Single Channel Pipettes, 1 Pipette Stand (6 Position), 4 Sizes Tip Boxes with Tips, Reagent Reservoir Sample, Calibration Certificate• Also included extra two pipettes 1-10ul, 10- 100ul.• Fully Autoclavable• Advanced volume gearing mechanism• Should have large, easy-to-read display• Double-action pipetting button with a rotating upper part, for easy and light volume setting.• Should be light weight, least RSI (Repetitive Strain Injury)• Ergonomic design, separate soft touch tip ejector• In lab calibration and easy maintenance, easy to open• Super blow out piston for small volumes to ensure delivery of micro size drops• Should be ISO and USFDA Certified (provide document)• 2 years warranty 28 Desktop Computer--• Operating System: Windows 11 Pro (original)• Processor: Intel® Core™ i7-12700 (up to 4.9 GHz with 25 MB cache and 12 cores)• Memory: 8 GB DDR4-3200 MHz RAM• Storage: 1TB HDD + 512GB SSD• Graphics: Intel® UHD Graphics 770• Chipset: Intel® Q670• Connectivity and Communications: intel® Wi-Fi 6E and Bluetooth® 5.3 wireless card• Ports: 1 headphone/microphone combo; 1 USB Type-C 10Gbps signaling rate; 3 USB Type-A• 10Gbps signaling rate• Video Connectors: 1- HDMI 1.4; 1- Display Port 1.4; 1- VGA• Monitor: size- 60.5 cm, FHD (1080p) with IPS display• Pointing Device: Wired Mouse• Keyboard: Wired• Should include original preinstalled latest version Microsoft Office Home, & Student 2021Lifetime Subscription and 5 years Quick Heal antivirus subscription• UPS: 1,000 VA, 360 W, with least 15 minute back-up• Warranty: 03 years (on-site) 29 Distillation unit--• Capacity Distilled Water Output: 1.5 LPH• Minimum cooling water requirement (Ltr/min): 1• Heater: Quartz• Boiler: Boro 3.3• Condenser: Boro 3.3• Biological Activity: Pyrogen Free• Conductivity S/cm*:<3 × 10-6• Power consumption (kw): 3 kW• Voltage (V) : 230V• Dimensions (L × B × H) in mm: 640 × 630 × 520• Warranty: 2 years 30 Rotary Microtome--• Designed for effortless manual sectioning via a counter-balanced and smooth-running hand wheel. • Instrument with X/Y specimen orientation• Fast exchange system for specimen clamps, both Universal & Standard types• Personalized user selectable coarse feed wheel turn direction, either clockwise or anti-clockwise to suit user’s preference • Retraction on/off function• Two mechanical trim steps: 10 μm and 50 μm• Blade holder for disposable blades –must be suited for both high & low profile blades and standard specimen clamp.• The object head with +/-8° X/Y orientation equipped with a fast specimen clamp exchange system for improved workflow.• Space on top of the instrument housing for storage of sectioning tools and accessories.• Maintenance-free vertical cross-roller guides and horizontal specimen feed via precision cylinder guide system.• Distortion-resistant base plate to ensure optimum overall stability.• The vertical stroke of 59 mm• Horizontal specimen travel range of 25 mm• Allow to section specimens up to a size of 50 mm x40 mm x 40 mm.• Ergonomically designed hand wheel grip.• Hand wheel lockable in any position via brake lever attached to base plate• Operating conditions o Operating temperature range 10°C to 35°Co Temperature range during storage 5°C to 55°Co Relative humidity max. 80%, non– condensing o Storage humidity < 80%• Technical information • Section thickness setting range 0.5–60 μm• Section thickness selection from 0.5–2 μm in 0.5 μm-steps• from 2–10 μm in 1 μm-steps • from 10–20 μm in 2 μm-steps• from 20–60 μm in 5 μm-steps• Total horizontal specimen feed 25 mm• Vertical specimen stroke 59 mm• Specimen retraction ON/OFF• Specimen orientation• Horizontal 8° & Vertical 8°• Rotation ± 90°• Dimensions and weight (Preferred)• Width 438 mm 17.24”• Depth 472 mm 18.58”• Height 265 mm 10.43”• Working height (knife edge) 105 mm 4.134”; Weight (without accessories) 27-30 kg.• Should have more than 40-50 installations only in East India, with 50% being in reputed Govt. Institutions (provide documentary evidence).• Must be CE & USFDA certified/approved (provide documentary evidence). OEM: Sakura/ Leica/ CellPath/ Tanner Scientific• Should have dedicated OEM’s own Company Service Support for Eastern/North-Eastern Indiawith company’s own factory trained service engineers based in East/ North-Eastern India to provide prompt support (provide documentary evidence).• Warranty: 5 years (on-site) 31 Paraffin Floatation Water Bath--Four Racks - Double Walled, inner made of SS sheet & outer of MS sheet. Heating is done by strip type heaters & 2 thick fibre glass wool insulation is provided. Temperature range shall be from Water Temp. / Ambient to 100oC, +/-0.5oC, controlled by a Digital Indicator Cum Controller with Lid & Trays. Operated on 220V A.C. Mains. Provided with Powder Coating Paint Finished. Warranty: 3 years (on-site) 32 Scalding Tank (Stainless Steel)-- Tank capacity-30-40 litres, Voltage: 220-240 V.Control panel with digital temperature indicators. Material: Stainless steel, Type: Electrically operated. 33 Electric Stunner--Stunner with tongs made of SS with isolated handles to operate on sheep/goat and pigs. Shock proof control box with analog display for volt and ampere. Variable stunning voltage. Electrical supply from the control box to SS tongs through electrical cable.• Voltage: 230 V +/- 10%• Frequency: 30-50 Hz• Stunning Voltage: 80-400 VAC• Stunning Current: 1.5 Ampere 34 Captive Bolt Pistol--• Non-penetrative concussion stunner• Universal in application from large bulls to small lambs, with varying power load strengths• Well balanced, comfortable ergonomically designed handle• Automatic bolt return• Standard tool in 0.22 or 0.25 calibre.• Robust solid construction. • Features/Specifications: • Chrome steel finish• Knurled handle for better grip • Fewer parts than competitive brands• Bolt penetrates 2.25 35 Portable Colour Analyser--Digital colour meter that measures colour in LAB colour values and finds Delta E colour difference between master and samples using NR seriescolorimeter. Warranty: 02 year (on-site) 36 Muffle Furnace--Temperature range up to 1000oC, workingtemperature up to 950oC, size 19 x 16 x 18 (L X W X H) inches, 220/230 volt, Warranty: 02 year (on-site) 37 Micro Kjeldahl Apparatus--Horizontal, MS powder coated with 6 heaters with energy regulator control, maximum temperature approximately 4000C, capacity for heating of 500 mlKjeldahl flask, Warranty: 02 year (on-site) 38 Mixer Grinder--No of Jars: 3; Jar Size: Wet Jar (1.5 Litres), Multipurpose Jar (1 Litre), Chutney Jar (0.3 Litres); Jar Material: Stainless Steel; Body Material: ABS; Blade Material: Stainless Steel; Speed Control: 3 Speed Control + Pulse, Wattage: 1000W; Voltage:230 V, Warranty: 01 year (on-site) 39 Lab Willy mill--Body Material. MS, Power Source. Electric, Voltage- 240 V, Frequency- 50 Hz, Power Consumption- 0.75 kW, Load. 43 Kg. 40 ECG machine--• 3 Channel ECG Machine with Automatic interpretation.• Simultaneous 12 Leads acquisition and 3 ch recording.• 4.3” inch colour TFT LCD display ECG Wave.• Support touch panel and key pad input ways.• Built in USV / RS 232 interface (ECGNET Software)• Built in rechargeable Li-ion Battery support less than three (3) hours continuously work.• Warranty :3 year (on-site) 41 Digital Camera--Dimension: Width – 125mm, Length – 64, Height – 96mm, Thickness – 76.5mmMegapixel: 24.2MP, Focal Length: 18 – 55mm 42 Cow Replica Model--Approximately one sixth the size of the real cow, this cow models shows the internal and external anatomy of a female cow, including ruminant system, reproductive system and digestive system.Model includes:1. Model on display stand2. Cross sectional view of internal and external anatomy3. 13 removable parts4. Quick start guide5. Online access to curriculum, students activity and presentation slides6. (2) ( 20” X 30”) posters :Beef cuts and cow anatomy7. 1 year limited warranty8. Dimension : 10”X21”X33./5”9. Weight : 45 lbs10. 13 detachable parts Curriculum :1. Cow anatomy2. Digestive tract3. Reproductive tract• Presentation slides , students assessment tools 43 Large Dog Model--The Large Dog Model is a detailed model of a large- breed female dog. Featuring internal and external anatomy, it splits in half to reveal removable organs. Additionally, incorporate the included curriculum for a complete experience.Package includes:• Model on display stand• Cross sectional view on internal and external anatomy• 10 removable parts• Quick start guide• Online access to curriculum• 1-year limited warranty Product Dimensions: 15” x 27” x 30” Product Weight: 47 lbs.10 detachable parts Curriculum :Lessons topic :1. Canine Anatomy2. Digestive Tract3. Reproductive SystemIncludes Presentation slides, Students activity and assessment tool 44 Cow Anatomy 3D Flip Chart--The Cow Anatomy 3D Flip Chart is a portable relief chart that splits down the middle to reveal 3 separate bovine anatomical illustrations: the outer view of the cow, the skeleton and internal organs and reproductive tract. It is one-sixth the size of an actual cow and features white board material. Use it to teach bovine anatomy and other bovine systems. It includes hindquarter, hoof and reproductive tract callout diagrams.Cow Anatomy 3D Flip Chart includes:• 3 contoured flip charts: exterior anatomy, internal skeleton and organs and internal organs• Tabletop stand• Floor stand on wheels• Online access to curriculum• 1-year limited warranty• Made of white board material for use with most dry erase markers• Weight: 35 lbs.• Dimension: 18” X 40” X 32” Curriculum Spotlight1. Bovine AnatomyPresentation slides and students assessment tool 45 Demonstration Model of Cow--• Natural size, detachable skin to show superficial and deep muscle.• Head and neck detachable and dissectible.• Viscerae are dissectible to demonstrate various systems within the organ are also detachable.• Detachable hoof 46 Exhibition Panel/ Panel Board with stand--• Application: Exhibition Panel• Size: 4x 36 inch, Height: 6-8 foot• Material: PVC• Shape Rectangular 47 RMS Speakers--SRX-120DX, 100Watts, STA-150, With tripod standof height adjustment : 3.5ft-6.5 ft, Load Capacity; 40 Kg, Warranty: 2 years 48 Wireless Microphone--Audio Output:0110mV/600,Freq. Resp: 50-14000Hz, Antenna: Detachable through BNC Connector, power: AC-220-240 for AC adopter, ModulationMade : FM(F3E), Warranty: 2 years 49 Amplifier--AC & 24V DC Operated, 250 Watts,6Mic & 2Aux, Warranty: 2 years 50 Public Address with Speaker--Amplifier: WA-320/AWM-321, Warranty: 2 years 51 Interactive board--Size - 86’’ with 4k Ultra High Definition (3840 x 2160) @ 60 Hz with OLED display technology with 8 ms response time, 20 points IR multi touch interface, 3 HDMI, 4 USB, Bare dimension of 1990 x 114 x 1201 mm with < 320 W power consumption, build in android8.0 with < 3 GB RAM and < 32 GB ROM with OPS 52 Video Camera (HD)--• Product Dimensions: 33 x 22 x 28 cm; 1 kg• Flash memory type: SDHC• Resolution: 4k• Compatible Devices: Laptop• Special Features: Face Detection• Mounting Hardware: Camera Recorder, Li-ion Battery Pack (7.28V), Adaptor (12V), AC Cable,Eye Cup, Handle Unit, Mic Holder, O/I• Number of items: 7• Display Technology: OLED• Standing screen display size: 3.5 Centimetres• Image stabilization technology: Digital• Image Stabilisation: Yes• Optical zoom: 24 x• Digital zoom : 24 x• Min Focal Length: 23• Video Capture Resolution: 4K• Batteries Included: No• Batteries Required: Yes• Wireless Type: 2.4 GHz Radio Frequency• Connector Type: Wi-Fi• Form Factor: Compact• Lens type: Zoom• Warranty: 2 years (on-site) 53 Antibiotic zone reader--Digital display range : 0 mm to 35 mm, readability0.1 mm, warranty: 2 years 54 Hot Plate Analgesiometer--30x30 cm heating surface with perpex enclosure micro controller based digital temperature indicator Temperature range : 30-80 cWarranty: 2 years (on-site) 55 Plethysmometer--Digital display with pedal switch control, Warranty: 2 years (on-site) 56 Magnetic stirrer with bar--With pivot ring , dimension 6x10 mm, 9.5x40 mm, 12.7x 76, 8x65 mmWarranty: 2 years (on-site) 57 Small Animal Anesthetic Apparatus--• Respiration mode Manual mode, open mode, closed mode, semi-open and semi-closed mode.• APL valve should adjustable easily, range: 0-60 cm H2O and there should be one safety pin top ofis there is high pressure should be released easily.• It is easy to clean the dirty and the color is black.• It is a 0-4L/m high precision flow meter which is very available for small animal usage.• It has a select bar technology, which is easy to change the anaesthesia vaporizer with one switch.• The Vaporizer should be made by stainless steel with key filler.• The CO2 circle absorber has inspiration valve and expiration valve, which have plastic cover to observe the animal breath clearly for doctors.• The CO2 circle absorber has a high-quality soda lime chamber, which is poly-carbonate (PC) material for medical usage. It is very strong andnot broken and should have 500 gms capacity.• It has an option for platform on the top, where the patient monitor is put.• The structure is very reasonable for doctor to use this machine alone: the flow meter is on the left,the vaporizer is on the middle, the CO2 circleabsorber is on the right, the airway pressure gauge should be top of absorber, which can monitor the airway pressure of close system. And the O2 flush is on the left top of flow meter for easy operate.• This machine is very small to save the space of the operation room.• This machine can be put on the trolley, also can be put on the table at the same time can be put on our wall mount arm.• Warranty: 2 years (on-site) 58 Multi parameter vital signs monitor--• Monitor should have integrated non-invasive, invasive measurements & features suitable for small, medium and large animals. (Cat& Dog )• Should have TFT/LCD display with at least 12.1 inches with numeric display simultaneously. Should be capable of customized display.• Should be compact & portable with carrying handle.• Should have facility to monitor ECG, HR, SpO2, Resp., NIBP, Respiration & Temp. & optional: - 2IBP & Etco2 .• Should have Equipped with the accessory box, the medical staff will be more convenient to store and take out the accessories.• Should display at least 8 waveforms of selected parameters.• Should be able to store & display at least 120 hrs. of graphical and tabular trends of all parameters and minimum 2000 groups of NIBPmeasurement.• The SpO2 technology should also sense in low perfusion. PI (Perfusion Index) should be displayed on the screen.• Monitor should have ST segment calculation with facility to detect life-threatening arrhythmia.• Should have internal rechargeable battery for 2 hours monitoring or more.• Should have audio/visible alarm.• Should have ESU & Defibrillation protection.• Should have drug calculation, hemodynamic calculation, ventilation calculation, oxygenation calculation & renal function calculation asstandard features.• Other bed observation should be there as standard feature.• Warranty: 2 years (on-site) 59 Hydraulic OT Table--• Two panel table top systemthat adjusts form horizontal to near vertical to hold the pets thedesign position during surgery.• Overall size of the top: 20”W x55”L.• Powerful and durable electric lifting actuator holds 120Kgs on the surgery top.• Improved waster channel and drain hole design allow for fluidly drain flow. Close fitting translucent bucket improves waste collection.• Buffered hinges and air spring added to cushion the dropping impact of the whole top and V-top side panels.• The IV pole mount is selded on.• Table can be lifted form 28” to 47”.• Workshop Swivel Angel 0°-45°.• Buffer hinge.• Heating system with accurate temperature monitoring and control.• Category: Operation Table & amp; Light• Warranty: 2 years (on-site) 60 Shadow less Lamp--• The LED Bulbs that are fixed into this is meant for saving power consumption• The Sterile handle Present in this equipment helps in easy adjustment.• The operating light designed for the use in high demanding surgeries.• LED bulbs used to ensure low energy consumption and long service life.• Light head is resistant to disinfectant, easy to clean.• LCD Display for showing all important parameter like intensity/on/off.• Flexible and stable balance arms suspension system for height and angle.• Light Intensity: 2,40,000 Lux• Number of LED’s: 72• Life span of LEDs: 50,000 hrs• Focus Dia: 15-25 cm• Power supply: 160V-240V DC, 50Hz Control Unit: SMPS• Dome size: 500mm• Spot Diameter: 125-150mm• Colour Temp. 3500-4800k• Power Supply: 220v/50HzAC• Power consumption: 40Watt• LED Average Light: 50000 Hrs• Intensity Control-30-100• Warranty: 2 years (on-site) 61 Electrocautery machine-- • Should Have Microprocessor Controlled Surgical Generator• The unit should comply with safety requirement of IEC60601-1 & IEC 60601-2-2 and test report for each power setting need to be present.• The equipment should have brand name / model name mentioned on the equipment. Original Literature of the Manufacturer needs to be given• Machine should be able to monitor changes in tissue impedance• Number of coagulation modes should be 4• Maximum power in coagulation mode should be 150w• Number of bipolar modes should be 3 • Maximum power of bipolar mode should be 120w • Should have patient plate monitoring facility• Should have 1 hand switch & 1 foot switch for monopolar mode & 1 foot switch for bipolar mode• The system should have facility to use two monopolar coag modes simultaneously• Should have touch screen keyboard / membrane pad for power settings• Should have lcd / led display • Should have 3 segments for the display• Should have individual display for bipolar and monopolar cut and monopolar coagulation • Rf leakage current should be 100ma • The power supply should be 230v (±15%) 50hz• Type cf equipment (iec 601 –1 & iec 601-2- 2) defibrillator proof. Various modes in electrosurgical unit: a) mono-polar cut: 1. Pure cut: 300- 400 w 2. Low cut: 300-400w, 3. Blend: 200 -250 w, b) mono-polar coagulation: 1. Spray: 120 w 2. Fulgurate:150 w 3. Desiccate: 120 w c) bipolar coagulation: 1. Cut/precise: 70-120 w, 2. Force/standard: 70-100, 3. Micro/Macro: 70-100 W• Auto Start coagulation & auto stop coagulation Input Power source: Operating• Range: 170-260 VAC Line Frequency: 50-60 Hz Minimum High Frequency Leakage• Bipolar Less than 60mA Monopolar less than 150mA Standard Accessories to be provided: 1. Reusable/Disposable dual pad Silicon/Polyhesive Plate with cable 2. Bipolar forceps with cable 3. Mono polar-hand switch pencil 4. Dual pedal foot switch for Mono-Polar 5. Single pedal foot switch for bipolar 6. Power cord• Unit should have patient plate Contact Quality Monitoring System/REM System- With this atthe moment the contact between Plate & Patient reduces, it stops the HF delivery & gives error message with audio visual indications• The system should have Return ElectrodeContact Quality Monitoring (REM) System preferably with Adaptive REM facility• The system should have facility to use two monopolar coag modes simultaneously• The system should have ability to restore last power setting• Machine should be able to upgrade to a higher version• The unit should operate at local climatic conditions & up to temperature of 40 degree Celsius.• Warranty: 2 years (on-site) 62 Electric dehorner--• Material: Stainless Steel• Automation Grade: Automatic• Product Type: Electric and stainless steel• Capacity: 50 HZ• Warranty: 2 years (on-site) 63 Community nest box--• Product Dimensions: 45.6L x 13W x 26H• Material: Alloy Steel 64 Feed grinder (Mini)--• Capacity: 300 kg per hour• Motor Power: 2 hp• Dimensions (LxWxH): 110X125X185mm• Weight: 50kg• Material: Mild Steel• Hammer Size: 14 inches• Number of blades: 20• Automation Grade: Automatic• Frequency: 50Hz• Voltage: 440V• Warranty: 2 years (on-site) 65 Feed mixer (Mini)--• Capacity: 100 kg• Motor Power: 3 hp• Material: Mild Steel• Mixing Chamber Volume: 100 liters• Motor rpm-1440• Foot mtg• Gear shaft arrangement rpm -35• Very high quality and strong construction in MS• Warranty: 2 years (on-site) 66 Milking Machine--• No of Buckets: 1.0• Productivity: 1-10 cows/hour• Capacity: 25 Litre• Automation Grade: Semi-Automatic• Power Input (W): 110W• Voltage (V): 110-220V• Frequency (Hz): 50/60 Hz• Warranty: 2 years (on-site) 67 Incubator (Hatchery)--• Egg Capacity: 500 egg• Temperature Range: 37.5 Degree C• Inner Material: Hylum• Bird Type: Chicken• Dimensions(LXBXH): 52 x 42 x 36 inch • Automation Grade: Automatic• Humidity Range: 99%• Voltage: 220 V• Weight: 78 kg• Hatching Rate: 85%• Usage/Application: Poultry Farm• Frequency: 50-60 Hz• Phase: Singe Phase• LED Display: Yes• Power Consumption: 200 Watt• Warranty: 2 years (on-site)
Contract Date: Feb 15, 2025 Contract Value : ₹ 1.22 Crore
Government Departments No of Bidders 12
Tripura View Result →
49.
Health and Family Welfare #6741940 AOC
Tender For Medicines And Others , Aceclofenac 100Mg + Paracetamol + Thiocolchicoside 4Mg Tab. , Aceclofenac 100Mg + Paracetamol325mg + Chlorzoxazone 250Mg Tab. , Aceclofenac 100Mg Tab. , Aceclofenac 50Mg + Paracetamol 125Mg 60Mlsyrup , Aceclofenac 50Mg + Paracetamol 325Mg + Serratiopepdise10mg Tab. , Aceclofenac 50Mg + Paracetamol 325Mg Tab. , Aceclofenac 50Mg, Susp/Each 5Ml. Syrup , Acetazolamide 250Mg, Tablet , Acyclovin 3 %Oint , Acyclovir500mg/Vial Injection , Acyclovir 0.5% 5 Ml Eye Drop , Acyclovir 200Mg Tablet , Acyclovir 250Mg/Vial Injection , Acyclovir 400Mg Tablet , Acyclovir 800Mg Tablet , Adenochromeinjection(5Mg,/5Ml) 5Ml , Adenosine Injection, 3Mg/ 2Ml. , Adrenalineinjection,1Mg/1 Ml , Agsinjection,10000 Iu/Ml , Albendazole 10Ml Syp , Albendazole 400Mg, Tablet , Allopurinol 100Mg Tablet , Alpha-Beta Arteether Inj 150 Mg/2 Ml 2 Ml Vial , Alphacalcidol Cap , Alprazolam 0.25Mg, Tablet , Alprazolam 0.5Mg, Tablet , Ambroxol Hcl + Levosalbutamol + Guaiphenesin 100Mlsyrup , Ambroxol Hcl + Levosalbutamol + Guaiphenesin 15Ml Drop , Ambroxol Hydrochloride & Levocetirizine Hydrochloride 60Ml Syrup , Ambroxol15mg + Guaip 50Mg+ Terbutaline1.25Mg 100Mlsyrup , Ambroxol15mg + Guaip 50Mg+ Terbutaline1.25Mg 60Mlsyrup , Amikacininjection 100 Mg 2Ml , Amikacininjection 250 Mg 2Ml , Amikacininjection 500 Mg 2Ml , Aminophylline Inj 25 Mg/ Ml 10 Ml Vial , Amiodarone 100Mg Tablet , Amiodarone Hydrochloride Injection 50Mg/Ml 3Ml , Amlodipine 10 Mg Tablet , Amlodipine 2.5Mg Tablet , Amlodipine 5 Mg + Atenolol 50 Mg Tablet , Amlodipine 5Mg Tablet , Amoxicillin + Clavulanic Acid Tablet Kid 228Mg. , Amoxicillin 200Mg, + Clavulanic Acid 28.5 30 Ml Syp , Amoxicillin 250+ Clavulanic Acid 125Mg, Tablet , Amoxicillin 500+ Clavulanic Acid 125Mg, Tablet , Amoxicillin 875Mg + Clavulanic Acid 200Mg, Tablet , Amoxycillin 10 Ml Drop , Amoxycillin 5Ml/125Mg30ml Syp , Amoxycillin Trihydrate Disper 125Mg. Tab. , Amoxycillin Trihydrate Disper 250Mg. Tab. , Amoxycilline 250Mg Cap , Amoxycilline 500Mg Cap , Amoxycilline Injection, 250Mg , Amoxycilline Injection, 500Mg , Amoxycilline With Clavulanate 1.2Gm Injection , Amoxycilline With Clavulanate 300Mg Injection , Amoxycilline With Clavulanate 600Mg Injection , Amphotericin B 50Mg. Inj. , Ampicillin 30Ml /125Mg Syp , Ampicilline 250Mg Cap , Ampicilline 500Mg Cap , Ampicilline Injection, 250Mg/Vial , Ampicilline Injection, 500Mg/Vial , Antacid 170Mlsyrup , Antacid Tab. , Anti D Immunoglobulin For Iv/Im Use (Monoclonal) Inj 150Mcg 1 Ml Vial , Anti D Immunoglobulin For Iv/Im Use (Monoclonal) Inj 300Mcg Pfs/Vial , Anti Scorpion Venominjection, 10 Ml , Anti Snake Venom Inj Polyvalent 10 Ml (Lyophilized) 10 Ml Vial , Anti Tetanus Human Immunoglobulininjection,250 Iu /Vial , Anticold Drop , Anticold Syrup 60Ml (Chlorpheniramine Maleate + Phenylephrine Hydro + Paracetamol + Sodium Citrate 60Ml Syrup ) , Anticold Tablet , Antifungal 5 Gm Oint. , Antioxident Cap , Arteetherinjection,1 Ml , Artemether Inj 80 Mg/ Ml 1 Ml Amp , Artemether+Lumefantrine Tab 20 Mg+120 Mg 1 X 6 , Artesunateinjection,60Mg, , Artesunate + Sulphadoxine + Pyrimethamine(Age Group Of Less Than 1Year) Tab Artesunate 25Mg(3Tab) + Sulphadoxine 250Mg(1Tab)+Pyrimethamine 12.5Mg Tablets Ip(1Tab) 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group 15 Or Above) Tab Artesunate 200Mg (3 Tab) + Sulphadoxine 750Mg (2 Tab) + Pyrimethamine 37.5 Mg (2 Tab) Tab. Ip 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group Between 1-4 Years) Tab Artesunate 50Mg (3 Tab) + Sulphadoxine 500Mg (1 Tab) + Pyrimethamine 25 Mg (1 Tab) Tab. Ip 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group Between 5 To 8 Years) Tab Artesunate 100Mg (3 Tab) + Sulphadoxine 750Mg (1 Tab) + Pyrimethamine 37.5 Mg (1 Tab) Tab. Ip 1 Combi Pack , Artesunate + Sulphadoxine + Pyrimthamine (Age Group Between 9 To 14 Years) Tab Artesunate 50Mg (3 Tab) + Sulphadoxine 500Mg (2 Tab) + Pyrimethamine 25 Mg (2 Tab) Tab. Ip 1 Combi Pack , Artesunate 60 Mg, Tablet , Arv Rabies Vaccine Injection, I.P. 2.5 Iu Single Dose , Ascorbic Acid 500Mg, Tablet , Aspirin Low Dose Tab 75 Mg - , Asprindelayed Rel.75Mg, Tablet , Asprin Delayed Rel. 150Mg, Tablet , Atenolol 100 Mg, Tablet , Atenolol 50 Mg, Tablet , Atorvastatin 10 Mg, Tablet , Atorvastatin 20 Mg, Tablet , Atracurium Besylateinjection, 10Mg/ 1 Ml , Atropine 1% Eye Drops 5 Ml Vial , Atropine 1% Eye Ointment 3 Gram Tube , Atropine Sulphateinjection,0.6Mg/Ml , Azithromycin Syp 100Mg/5Ml 15 Ml Bottle , Azithromycin Syp 200Mg/5Ml 15 Ml Bottle , Azithromycine 250 Mg, Tablet , Azithromycine 500 Mg, Tablet , B-Complexinjection,10Ml , B-Complexinjection,30Ml , B-Complexminerals With Zinc Cap , B-Complex 100Mlsyp , B-Complex 200Mlsyp , B-Complex Tablet Nfi , Bcs Glass Batal 1000Ml - 1500Ml. , Benzathain Penicillininjection,12 Lakh Iu/Vial , Benzathain Penicillininjection,6 Lakh Iu/Vial , Betahistidine 16 Mg, Tablet , Betahistidine 8 Mg, Tablet , Betamethasone Dipropionate Ointment 0.05% 15 Gram Tube , Betamethasone Sodium Phosphate Inj 4 Mg/ Ml 1 Ml Amp , Betamethasone Tab 0.5 Mg - , Bisacodyl Suppositories 5 Mg , Bisacodyl Tab 5Mg , Botropase Injection,(Haemocoagulase 1Cu) 1Ml , Bromhexin 4Mg + Salbutamol 2Mg 60Ml Syp , Bromhexine 4Mg/5Ml 50 Ml Bottle Syp , Budesonide Nebulising Suspension Containing Budesonide 0.5 Mg/2 Ml 2 Ml Amp , Budesonide Inhalation 200 Mcg Per Dose 200 Metered Dose Container , Bupivacaine Hcl For Spinal Anaesthesia Inj 0.5%+8.25% Dextrose 4 Ml Amp , Bupivacaine Hcl Inj 0.5% 20 Ml Vial , Cabergoline Tab 0.5 Mg 4 Tablets / Strip , Caffine Citrate 20 Mg/Ml Inj. , Calamine Lotion 50 Ml Bottle , Calcium 100Ml. Syrup , Calcium 30Ml. Drop , Calcium Carbonate 500Mg Tab. , Calcium Chloride Injection , Calcium Gluconate Injection, 10 %/10 Ml , Calcium With Vitamin D3 500 Mg + 250 Iu Tab. , Capecitabine Tab 500 Mg - , Carbamazepine Syp 100Mg/5 Ml 100 Ml Bottle , Carbamazepine Tab 200 Mg - , Carbamazepine Tab 400 Mg - , Carbimazole Tab 10 Mg , Carboplatin 150Mg. Inj. , Carboprost (15-Methyl Pgf2a) Inj 250Mcg 1 Ml Amp , Carboxy Methyl Cellulose Sodium Drops 1% Eye Drops 10 Ml Vial , Cefadoxil250mg, Tablet , Cefazolin Inj 1Gm/Vial Vial , Cefazolin Inj 500 Mg/Vial Vial , Cefedoxil 500Mg, Tablet , Cefedroxyl 500Mg Cap , Cefelexin Oral Susp 30Mlsyp , Cefepimeinjection,1000Mg, , Cefepimeinjection,500Mg, , Cefexime 200Mg, Tablet , Cefixime 200Mg + Ofloxacin Ip 200 Mg Tab. , Cefixime Oral Suspension 100Mg/5Ml 10 Ml Bottle , Cefixime Tab 200 Mg - , Cefixime Tab 50 Mg - , Cefodraxil 125Mg,/30Ml Syp , Cefoparazoneinjection,1Gm , Cefoparazoneinjection,250 Mg, , Cefoperazone + Sulbactam Inj (1000 Mg +1000 Mg )/Vial , Cefotaxime Sodinjection,1Gm/ Vial , Cefotaxime Sodinjection,250 Mg,/ Vial , Cefotaxime Sodinjection,500 Mg,/ Vial , Cefozoline Sodiuminjection,1Gm , Cefozoline Sodiuminjection,250Mg, , Cefozoline Sodiuminjection,500Mg, , Cefpodoxime 200 Mg With Ofloxacin 200Mg Tablet , Cefpodoxime 50Mg/5Ml 30Ml Syrup , Cefpodoxime- Tab 200 Mg - , Cefpodoxime- Tab 50 Mg - , Ceftazidimeinjection,1Gm , Ceftazidimeinjection,250Mg, , Ceftazidime Inj 500 Mg/ Vial , Ceftriaxoneinjection,125 Mg, /Vial , Ceftriaxoneinjection,1Gm /Vial , Ceftriaxoneinjection,250 Mg,/ Vial , Ceftriaxone+Tazobactum 1.125Injection, , Cefuroximeinjection,250Mg, , Cefuroximeinjection,750Mg, , Cefuroxime 250Mg, Tablet , Cefuroxime 500Mg, Tablet , Cephalexin 250Mg Cap , Cephalexin Cap 500 Mg , Cephalexin Dispersible Tablet Tab 125 Mg - , Cephalexin Syp 125Mg/5Ml 30 Ml Bottle , Cetirizine 5Mg/5Ml 30 Ml Bottle Syp , Cetirizine 5Mg/5Ml 60 Ml Bottle Syp , Cetrimide+Chlorhexidine Conc. Solution 15% + 7.5% 1 Litre Bottle , Cetrizine 10Mg, Tablet , Chloramphenicol Cap 500 Mg - , Chloramphenicol Eye Ointment 1% 4G/5G Tube , Chlorhexadine Acetate 0.5% White Soft Paraffin Medicated Gauze , Chlorhexidine Gluconate Mouthwash 0.2 % W/V Solution50ml Bottle , Chlorine 75Mg, Tablet Isi Mark , Chloroquine Phosphate5ml Injection , Chloroquine Phosphate Syp 160Mg /10Ml(50Mg/5Ml Base) 60Ml Bottle , Chloroquine Phosphate Tab 250 Mg - , Chlorphenaramine Meleateinjection,2 Ml , Chlorpheniramine Inj 10 Mg/ Ml 10 Ml Vial , Chlorpheniramine Maleate 4Mg, Tablet , Chlorpromazineinjection,25Mg, /Ml 2Ml , Chlorpromazine 100 Mg Tablet , Chlorthalidone Tab 50 Mg - , Chlotrimazole 2%+ Metronidazole 10%45 Gm Oint. , Cidex 5 Ltr. (Gluteraldihyde) , Cinnarzin 25 Mg, Tablet , Ciprofloxacin + Dexamethasone 5 Ml Eye Drop , Ciprofloxacin 250Mg, +Tinidazole 300Mg, Tablet , Ciprofloxacin 250Mg, Tablet , Ciprofloxacin 500Mg +Tinidazole 600Mg, Tablet, , Ciprofloxacin 500Mg, Tablet , Ciprofloxacin Eye / Ear Drop 0.3% 5 Ml Vial , Ciprofloxacin Eye Ointment 0.3% 3/3.5 Gram Tube , Cisplatin 10Mg. Inj. , Cisplatin 50Mg/50 Ml Inj. , Clindamycin Inj 150 Mg/ Ml 2 Ml Vial , Clobetasol Propionate Oint. , Clobetasol+Miconazole + Neomycin 10Gm Ointment , Clobetasone +Propionate + Miconazole Nitrate Cream10gm , Clofazimine Tab. , Clomiphene Citrate 50 Mg Tab , Clonazepam Injection, , Clopidogrel 75Mg + Aspirin 150Mg Cap , Clopidogrel 75Mg + Aspirin 75Mg Cap , Clopidogrel 75Mg, Tablet , Clotrimazole (Vaginal Tab) Tab 500 Mg (With Applicator) Single Tab. , Clotrimazole+Lignocaine Ear Drop 1% 5 Ml Vial , Clotrimoxazole 15Gm 2% Tube Oint. , Co-Trimoxazole Vaginal Pessarises 500Mg, Tablet , Cough Drop 15Ml , Cpm + Ammonium Chloride+ Sodium Citrate+ Menthol 100Ml Syp , Cyclophosphamide Inj 500 Mg/Vial Vial , Cyclophosphamide Inj. , Cyclophosphamide Tab. , Cynocobalamineinjection,10Ml (B-12) , Cynocobalamineinjection,30Ml (B-12) , Cyproheptadinehydrochloride & Tricholine Citrare 200Mlsyrup , Cyproheptadine 100Ml Syrup , Cyproheptadine 200Ml Syrup , Cyproheptadine 4 Mg, Tablet , Cytoheptadine 1.5 Mg, Drop 15Ml , Deferasiroxtab 500 Mg 30 Tab , Desferrioxamine Inj 500 Mg/Vial Vial , Dexamethasoneinjection,4Mg/Ml.10Ml , Dexamethasone Inj 8 Mg/2 Ml 2 Ml Vial , Dexamthasone 0.5Mg, Tablet , Dextran-70 Injection, , Dextromethorphan 10Mg/ 5Ml60ml Syp , Dextromrthrophen + Chlorpheniramine Maleateg 100Ml Syrup , Dextromrthrophen 10Mg + Phenylephrine Hcl 2.5Mg+Chlorpheniramine Maleate2mg 100Ml Syrup , Diazepaminjection,5 Mg/2Ml , Diazepam 5Mg, Tablet , Diclofenac30gm Oint , Diclofenac 50Mg +Paracetamol 325Mg+Chlorzoxazone 250Mg Tab , Diclofenac 50Mg,+ Paracetamol 500Mg, Tablet , Diclofenac Sodinjection, 10Ml , Diclofenac Sodinjection,3Ml , Diclofenac Sodium + Paracetamol +Serratiopeptidase 50 Mg +325 Mg + 10 Mg , Diclofenac Sodium 50Mg, Tablet , Diclofenac Sodium Injection 1Ml , Diclofenac With Menthol 30Gm Oint , Dicyclomineinjection,10Mg/ Ml , Dicyclomine Hydrochloride 10Mg, Tablet , Dicyclomine Hydrochloride 20Mg + Paracetamal 325Mg Tablet , Dicyclomine Hydrochloride 20Mg, Tablet , Dicyclomine Hydrochloride Oral Solution 10 Mg/Ml 30Ml , Diethycarbomazim 50Mg, Tablet , Diethylcarbamazine Tab 100 Mg - , Digoxin 0.25Mg, Tablet , Digoxin Inj 250 Mcg/ Ml 2 Ml Amp , Dilitizem Injection, , Diltizime 30 Mg, Tablet , Diltizime 60 Mg, Tablet , Diphenhydramineinjection,50 Mg, /Ml , Diphenhydramine 12.5Mg/Ml. Syp , Diphenhydramine 25Mg. Cap. , Diphenhydramine Sg Inj. , Diptheria Antitcxine 10000 Iu 10Ml. Inj. , Disodium Hydrogen Citrate 100 Ml Bottle , Dobutamine 50Mg,/Ml (5 Ml Amp)Injection, , Docetaxel 120Mg/Ml Inj. , Docetaxel 20Mg.Inj. , Domperidone 10Mg, Tablet , Domperidone 5Mg, Drop 15Ml , Dopamine Hydrochlorideinjection,40Mg, /Ml (5Ml Amp) , Doxorubicin 10Mg. Inj. , Doxorubicin 50Mg./ Vial Inj. , Doxycyclin 100Mg Cap , Doxylamine Succinate Tab 10 Mg - , Drotaverine Inj 40 Mg/2 Ml 2 Ml Amp , Drotaverine Tab 40 Mg , Dydrogesterone 10 Mg Tab - , Enalapril Injection, , Enalapril Maleate 2.5Mg, Tablet , Enalapril Maleate 5Mg, Tablet , Enoxaparin Inj 40Mg Pfsinj. , Enoxaparin Inj 60Mg Pfs , Enzyme With Vitaminsdrop 15Ml , Epirubicin 10Mg/ 5Ml Inj. , Epirubicin 50Mg. Inj. , Epirubicin Inj 100 Mg /Vial Vial , Erythromycine 250Mg, Tablet , Erythromycine 500Mg, Tablet , Erythropoetin 2000 I.U. Vial , Ethamsylate Injection, 2Ml , Ethamsylate Tab 250 Mg , Ethinylestradiol + Norethisterone Tab 35 Mcg +1Mg 21 Tablets/Strip , Etophylline & Theophyllineinjection, 2Ml (169.4+50.6 Mg, ) , Etophylline & Theophylline Sr 300Mg, Tablet, , Etophylline +Theophylline Tab 100 Mg (Etophylline 77 + Theophylline 23 )Mg , Etophylline +Theophylline Syp (46.5 + 40) Mg/5 Ml 100 Ml Bottle , Etoposide 100Mg/ 5Ml Inj. , Fentanyl Citrate 50 Microgram/Ml 2 Ml Amp , Ferric Ammoniun Citrate 200 Mg,+ Folic Acid 0.5 Mg, / 5Ml 200Ml Syp , Ferric Carboxymaltose Inj Equ.To Elemental Iron 500Mg/10Ml , Fluconazole 400Mg. Tab. , Fluconazole Eye Drops - 3Mg/Ml 10 Ml Vial , Fluconzaole 150Mg, Tablet , Flumazenil Inj 0.1 Mg/ Ml 5 Ml Multiple Dose Vial , Flunarizine Tab 5 Mg , Fluorouracil (5-Fu) - Inj 500 Mg /10 M Lvial 10 Ml Vial , Fluoxetine Cap 10 Mg , Folic Acid 5 Mg, Tablet , Formaldehyde (Formalin) 34% Acq 450 Ml Bottle , Framycetin Sulphate 1% Cream 30 Gram Tube , Frusemide 40Mg, Tablet , Furazolidone 100Mg, Tablet , Furazolidone 60Ml Syp , Furusemide Inj 10 Mg/ Ml 2 Ml Amp , Fusidic Acid Cream/Ointment 2% 15 Gram Tube , Gamma Benzene Hexachloride 1% Solution 100 Ml Bottle , Gemcitabine 1Gm. Inj. , Gemicitabine 1.4 Gm./Mlinj. , Gentamicininjection,40 Mg,/Ml 2Ml , Gentamicin Ear / Ear Drop (0.3%) 5 Ml Vial , Glibenclamide 5 Mg, Tablet , Gliclazide Tab 80 Mg - , Glimepiride 1 Mg + Metformin Hydrochloride Ip 500Mg Tab. , Glimepiride 1 Mg, Tablet , Glimepiride 2 Mg + Metformin Hydrochloride Ip 500Mg Tab. , Glimepiride 2 Mg, Tablet , Glipizide 5 Mg, Tablet , Glycerin 15%, Sod Chlor 15% Enema 20Ml , Glycerine Ip- Solution 100 Ml Bottle , Glycopyrrolate Inj 0.2 Mg/ Ml 1 Ml Amp , Griesofulvin 125Mg, Tablet , Griesofulvin 250Mg, Tablet , Haloperidol 5 Mg/Ml Injection, , Haloperiodol5 Mg, Tablet, , Halothane Inhalation 250 Ml Bottle , Heparin Sodiuminjection,1000Iu/Ml 5Ml , Heparin Sodiuminjection,5000Iu/Ml 5Ml , Hepatitis B Immunoglobulin 100 Iu/Vial Vial , Hyaluronidase Injection , Hydrochlorothiazide Tab 25 Mg - , Hydrocortisone Inj 100 Mg/Vial Dry Powder 100Mg/Vial , Hydrocortisone Sodium Succinateinjection, 200 Mg,/Ml Vial , Hydrogen Peroxide Solution 6% V/V 400 Ml Bottle , Hydroxy Progesterone Injection,250Mg,2Ml , Hydroxylurea 500 Mg Tab. , Hylace Injection, 1Ml , Hyoscine Butylbromide Inj 20 Mg/ Ml 1 Ml Vial , Hypersol 10 Mleye Drop , I.V. (Electrolyte M) 500Ml Ffs Dextrose Anhydous 5Gm Kcl 150Mg,Nacl 100Mg,Na Acetate 280Mg,Na Meisulphite21 Mg, Dibasic K Phosphate 130Mg,/100Ml 500Ml Ffs , I.V. Ciprofloxacine 200Mg/ 100Ml Ffs , I.V. D.N.S.500 Ml Glass Bottle500ml , I.V. D.N.S.500 Ml Plastic Bottle500ml Ffs , I.V. Dextran 4010% 500 Ml Ffs Bottle , I.V. Dextrose 5% Glass Bottle500ml , I.V. Dextrose 5% Plastic Bottle500ml Ffs , I.V. Dextrose10%Glass Bottle500ml , I.V. Dextrose10%Plastic Bottle500ml Ffs , I.V. Dextrose 25% 500Ml Ffs , I.V. Dextrose 50% 25 Ml Ffs , I.V. Electrolyte‘P’ 500Ml Ffs Dextrose Anhydous 5Gm Kcl 130Mg, Dibasic K Phosphate 25Mg, Na Acetate 320Mg, Na Meisulphite21 Mg,Cl2 31 Mg, /100Ml 500Ml Ffs , I.V. Electrolyte ‘G’) 500Ml Ffs Dextrose Anhydrous 5 Gmkcl 130 Mg,Nacl 370 Mg, Tabletammon Cl 370 Mg, Na Sulphite 15 Mg, /100Ml 500Mlffs , I.V. Hydroxy Ethyl Starch-200/3% , I.V. Hydroxy Ethyl Starch-200/6% , I.V. Linozolidine Ffs , I.V. Mannitol 10% 100Ml Ffs , I.V. Mannitol 20% 100Ml Ffs , I.V. Mannitol 20% 350 Ml Ffs , I.V. Metronidazole 100 Ml Ffs , I.V. Normal Saline 0.9 % 100 Ml Glass Bottle , I.V. Normal Saline 0.9 % 100 Ml Plastic Bottleffs , I.V. Normal Saline 0.9 % 500 Ml Glass Bottle , I.V. Normal Saline 0.9 % 500 Ml Plastic Bottle Ffs , I.V. Ofloxacine 100 Ml Ffs , I.V. Ornidazole 100Ml Ffs , I.V. Ringer Lactate Plasticbottle 500 Ml Ffs , I.V. Tinidazole 400Ml Ffs , I/V Electrolyte E I.V 500Ml Ffs/Bfs Bottle 500Ml Ffs. Dextrose 5G,Sodium Acetate 0.64G,Sodium Chloride 5G,Potassium Chloride 75Mg,Sodoium Citrate 75Mg,Calcium Chloride Solution Correcting Water Electrolyte & Nutrition 52Mg, ,Magnesium Chloride 31 Mg, Tablet,Sodium Meta Bi Sulphate 20 Mg, , Ibuporfen200mg, Tablet , Ibuprofen + Paracetamal 60Ml Syrup , Ibuprofen400 Mg + Paracetamol 325 Tablet , Ibuprofen 400Mg, Tablet , Ibuprofen 60Ml Syp , Imatinib Mesylate Cap 400 Mg - , Insulin Soluble Inj 40 Iu/ Ml 10 Ml Vial , Insulins Human Mixtard30:70 Injection,10Ml , Ipratropium 20 Mcg / Puff - Inhaler 200 Metered Dose Container , Iron & Folic Acid Entric Coated100mgof Elemental Iron (Adult)+Fa 0.5Mg, Tablet , Iron & Folic Acid Sugar Coated Elemental Iron Folic Acid 0.4 Mg Tablet , Iron 30Mldrop , Iron Ferras Sulphate Folic Acid 100Ml Syp , Iron Folic Acid (Iron Each 1 Ml Contain 20 Mg Elemental Iron + Folic Acid 100 Ug) 50 Ml Bottle With Droper Syrup , Iron Sucroseinjection 100Mg/5Ml , Isoflurane Inhalation 250 Ml Bottle , Isosorbite Dinitra.10 Mg, Tablet(Sub) {Sorbitrate} , Isosorbite Dinitra.5 Mg, Tablet(Sub.) {Sorbitrate} , Isosorbite Mononitrate 20 Mg, Tablet , Isoxsuprine Hcl Injection 5 Mg/Ml 2 Ml Amp , Itraconazole Cap 100Mg , Itraconazole Cap 200Mg , Ketamine Hydrochlorideinjection, 10Mg,/10Ml In Each Vial , Labetalol Inj 20 Mg/4 Ml 4 Ml Amp , Labetalol Tablet 100Mg. , Lactobacillus Tab 60 Million Spores - , Lactulose Solution 10 Gm /15 Ml 100 Ml Bottle Syp , Levocetrizine 5 Mg + Paracetamol-325 Mg + Phenylephrine 5 Mg , Levocetrizine Dihydrochloride 5Mg, Tablet , Levocetrizine Hydrochloride + Montelukast Sodium 60Mlsyrup , Levodopa 200 Mg + Carbidopa 50 Mg Cr Tab. , Levofloxacin250mg, Tablet , Levofloxacin 500Mg, Tablet , Levofloxacin Inj 500 Mg/100 Ml 100 Ml Ffs Bottle , Levonorgeastrelemergency Contraceptives0.75 Mg, Tablet2 No , Levothyroxine Tab 100 Mcg , Levothyroxine Tab 50 Mcg , Lidocaine 2%Injection,30Ml , Lignocain Spray , Lignocaine 2% + Adrnaline 0.01Gminjection,30Ml , Lignocaine Hydrochloride 4% Eye Drops 5 Ml Vial , Liquid Formalin 450Ml , Liquid Lysol 5 Ltr. Jar , Liquid Paraffin400ml , Liquid Paraffin50ml , Lithium Carbonate 300 Mg Tablet , Lobetalol Hclinjection, , Loperamide Tablet , Lorazepam 2 Mg Tablet , Lorazepam 2 Mg/Ml Injection , Losartan Potassium 50Mg, Tablet , Lotion Benzyl Benzoate 100 Ml 25% , Lotion Gama Benzyne Hexachloride 100Ml , Lquid Cresol With Soap Solu. 400Ml , M V Iinjection,10 Ml , Magnesium Sulphate Injection 50% 2 Ml Amp , Mebendazole 100Mg, Tablet , Mebendazole 30Ml Syp , Mefenamic Acid 250Mg + Dicyclomine 10Mg, Tablet , Mefloquine Tab 250 Mg - Tab , Menadione (Vit.K3) Injection,10Mg,/Ml 2Ml , Meropanam 1000Mg. Inj. , Meropanam 125Mg. Inj. , Meropanam 500Mg. Inj. , Metaclopromideinjection,10Ml (5Mg,) , Metaclopromideinjection,2Ml (5Mg,) , Metaclopromide 10Mg, Tablet , Metformin Hydrochloride 500Mg, Tablet , Methotraxate 2.5Mg. Tab. , Methotraxate 50Mg.Inj. , Methotrexate Tab 5 Mg - , Methylergometrininjection,(2Mg/Ml ) 1Ml Ampoules , Methyl Ergometrine0.125Mg, Tablet. , Methyl Prednisolone 16Mg, Tablet , Methyl Prednisolone 4Mg, Tablet , Methyl Prednisolone 8Mg, Tablet , Methyldopa 250Mg, Tablet , Methylprednisolone 1000Mg Injection , Methylprednisolone 125Mg Injection , Methylprednisolone 40Mg Injection , Methylprednisolone 500Mg Injection , Methylprednisolone 80Mg Injection , Metoclopramide Inj 5 Mg/ Ml 2 Ml Amp , Metoclopramide Tab 10 Mg - , Metoprololinjection,1Mg, /Ml , Metoprolol Tab 50 Mg - , Metronidazole 1% Ointment 15 Gram Tube , Metronidazole 200Mg, Tablet , Metronidazole 400Mg, Tablet , Metronidazole 60 Ml Syp , Miconazole Ip Cream 2% W/W 15 Gram Tube , Micronised Progestroninjection,200Mg,1 Ml -2Ml , Midazolam Injection,5Ml , Mifepristone Tab 200Mg 1 Tab Per Pack , Milk Of Magnasia 11.25Ml Liquid Paraffin 3.75Ml/15Ml 170 Ml Syp , Misoprostal200mcg4s Tabletpack , Morphine Sulphate. Injection,10 Mg, /Ml 1 Ml , Moxifloxacine 5Ml Eye Drop , Multivitamin 100Mlsyp , Multivitamin 200Ml Syp , Multivitamin Sugar Coated Nfi Formulatablet , Multivitamin With Protein 200Ml Syp , Multivitamine With Zincdrop 15Ml , Mupirocin Cream/Ointment 2% 15 Gram Tube , N-Acetyl Cysteine Inj 200 Mg/ Ml 1 Ml Amp , Naloxoneinjection, 0.4Mg,/Ml -1Ml(Amp) , Natural Progesteron Injection, 100Mg,/2Ml , Neostigmine Inj 0.5 Mg/ Ml 1 Ml Amp , Nifedipine 10 Mg, Tablet , Nifedipine 5 Mg, Tablet Cap. , Nitazoxanide 500Mg Tab. , Nitroglycerine (Glyceryl Trinitrate) Sub-Lingual Tab 0.5 Mg , Nitroglycerine(Glyceryl Tri Nitrate) Inj 25 Mg/5 Ml 5 Ml Amp , Norfloxacine 400Mg, Tablet , Ofloxacin 200Mg, Tablet , Ofloxacin Eye Drops 0.3% W/V 10Ml Vial , Ofloxacin Tab 400 Mg - , Ofloxacin, Ornidazole, Itraconazole Clobetasol,Propionate Cream 15Gm Oint , Ofloxacine 200 + Ornidazole 500 Tablet , Olopotadine Antiallergic Eye Drop 0.1% 5 Ml Vial , Omeprazole I.P.20Mg,+ Domperidone B.P.10Mg Cap , Ondansetroninjection,2 Ml , Ondansetron 4 Mg, Tablet , Ondansetron Syp 2Mg/5 Ml 30 Ml Bottle , Ondensetran Hcl 2 Mg, Drop 15Ml , Oxaliplatin 100Mg/20 Ml Inj. , Oxaliplatin 50Mg. Inj. , Oxytocininjection, 5Iu/1Ml 1 Ml Amp , Paclitaxel 260Mg. With Solvent Inj. , Paclitaxel 30Mg.Inj. , Paclitaxel Inj 260 Mg/43.4 Ml 43.4 Ml Vial , Pantoprazole 40Mg + Domperidone10mg Tablet , Pantoprazole 40Mg + Domperidone30mg Cap. , Pantoprazole 40Mg, Tablet , Pantoprazole Inj 40 Mg/Vial Vial , Paracetamal 125Mg 60Mlsyp , Paracetamal 250Mg 60Mlsyp , Paracetamolinjection,2Ml , Paracetamol. Drop 15Ml , Paracetamole 325 Mg, + Mefenamic Acid 500Mg, Tablet , Paracetamole 500Mg Tablet , Paracetamole 650Mg Tablet , Penicillin V Tab 125 Mg , Penicillin V Tab 250 Mg , Pentazocaine 1Ml Injection , Pepsin+Papain+Vitamin B1+B2+B6+Niacinamide+D-Panthenol 200Mlsyrup , Permethrin Lotion 5% W/V 60 Ml Bottle , Phenaramine Maleateinjection,22.75Mg,/Ml , Pheniramine Meleate 25Mg, Tablet , Phenobarbitoneinjection,200Mg,/Ml , Phenobarbitone 200Mg,/5Ml Syp , Phenobarbitone 30 Mg, Tablet , Phenobarbitone 60 Mg, Tablet , Phenytoin Injection, 50Mg,/Ml 2Ml , Phenytoin Sodium100mg, Tablet, , Phenytoin Sodium Oral Suspension 25Mg/Ml 100 Ml Bottle , Pilocarpine Eye Drops 2% 5 Ml Vial , Pilocarpine Eye Drops 4% 5 Ml Vial , Piperacillin 1Gm + Tazobactum 125Mg Injection , Piperacillin 2Gm + Tazobactum 0.25Mg Injection , Piperacillin 4Gm With Tazobactum 0.5Gm Injection, , Piroxicam 20Mg, Cap. , Piroxicam Gel 30Gm Oint , Potassium Chloride Injection,150 Mg,/10 Ml , Potassium Chloride 100Mg/ Ml 200Ml Syp , Povidone Iodine 5% Ointment 15 Gram Tube , Povidone Iodine Cream 250Gm Oint , Povidone Iodine Solution 5%, 100 Ml Bottle , Povidone Iodine Surgical Scrub 7.5% 500 Ml Bottle , Povidone Iodine Vaginal Pessary 200Mg , Powder Bleaching 25Kg , Powder Boric Acid 400Gm , Powder Glucose 100 Gm , Pralidoximeinjection,25 Mg,/Ml 20 Ml , Prazosin Tab 1 Mg - , Prednisolone 10Mg, Tablet , Prednisolone 20Mg, Tablet , Prednisolone 40Mg, Tablet , Prednisolone 5Mg, Tablet , Prednisolone Tab 20 Mg - , Primaquin 15Mg, Tablet , Primaquin 2.5 Mg, Tablet , Primaquin 7.5 Mg, Tablet , Promethazine Injection, , Promethazine Syp 5Mg/ 5Ml 60 Ml Bottle , Promethazine Tab 25 Mg - , Promthazine 5Mg,/5Ml 60Ml Syp , Propofol 1% Injection,(10Mg, /Ml), 10Ml Amp , Propofol Inj 1% W/V 10 Mg/ Ml 20 Ml Amp , Propranolol - 10 Mg Tab 10 Mg - , Propranolol 40Mg, Tablet , Protamine Sulphate Inj 10 Mg/ Ml 5 Ml Amp , Pyridoxime 10 Mg Tab. , Quinine Sulphate 300Mg, Tablet , Quinine Sulphate 300Mg/ 2 Mlinjection , Rabeprazole 20 Mg, Tablet , Rabeprazole 20Mg + Domperidone 30Mg Cap. , Rabeprazole 20Mg Inj , Rabeprazole Sod. Ip 20Mg + Domperidon Ip 10Mgtab. , Rabeprazole Sodium Ip 20Mg+ Levosulpride Sr 75 Mg , Rabies Immunoglobulin 150 Iu/2 Ml 2 Ml Vial , Rabies Immunoglobulin 300 Iu/2 Ml 2 Ml Vial , Rabies Vaccine (Cell Culture) Id/Im Inj 2.5 Iu/ Ml 1 Ml Vial , Ramipril 2.5 Mg, Tablet , Ramipril 5 Mg, Tablet , Ranitidine 150Mg, Tablet , Ranitidine 300 Mg, Tablet , Ranitidine Inj 50 Mg/2 Ml 2 Ml Amp , Reduced Osmolarity Ors Pkt. Who Formula Sodium Chloride 2.5Mg, Potessium Chloride 1.5Mg,Sodium Citrtr 2.09G, Dextrose 13.6G 20.5Gm , Rifampicin 150 Mg Cap. , Rifampicin 300Mg Cap. , Rifampicin 600Mg Cap. , Roxithromycin50mg, Tablet , Roxithromycin 150Mg, Tablet , Roxithromycine 30 Ml Syp , Salbutamol Nebulizing Solution 5 Mg/ 2.5 Ml 2.5 Ml Amp , Salbutamol 2Mg, Tablet , Salbutamol 4Mg, Tablet , Salbutamol Inhaler 100Mcg/Dose Metered Dose Container , Salbutamol Syp 2Mg/5Ml 60 Ml Bottle , Salicylic Acid 2% Ointment 30 Gram Tube , Salicylic Acid 6 % Ointment 30 Gram Tube , Sargramostin Inj 500 Mcg/ Ml Vial Vial , Seratiopaptidase 10Mg, Tablet , Silver Sulphadiazine Cream Usp 1% 25 Gram Tube Oint , Sitagliptin 100Mg, Tablet , Sodium Bi Carbonate Injection,7.5 % W/V 10Ml Ampoules , Sodium Picosulphate 100Ml Syp , Sodium Valproate Oral Solution 200Mg/5Ml 100 Ml Bottle , Sodium Valproate Tab 200 Mg - , Solution Chloroxylenol4.8%W/V Terpineol 9%V/V Alcohol Absolute 13.1%V/V ( Detol Formula}Hw , Streptokinaseinjection,15 Lac Unit , Succinyl Cholineinjection,50 Mg,/Ml , Sulfacetamide Eye Drops - 20% 10 Ml Vial , Sulfamethoxazole 100Mg,+Trimethoprim20 Mg, Tablet, , Sulfamethoxazole 200Mg + Trimethoprim 40 Mg /5Ml 60Ml Bottle Syp , Sulfamethoxazole 200Mg,+Trimethoprim 40 Mg, Tablet, , Sulfamethoxazole 400Mg,+Trimethoprim80 Mg, Tablet, , Sulfamethoxazole 800Mg,+Trimethoprim160mg, Tablet, , Surfactant Bovine(Intratracheal) Naturainjection,4Ml Amp , Surfactant Suspension For Intratracheal Instillation (As Liensed) Vial , Surgical Sprit 100 Ml , Surgical Sprit 500 Ml. , Talmisortan 20Mg Tablet , Talmisortan 40Mg Tablet , Talmisortan 40Mg,+ Hydrochlorthiazide Tablet , Talmisortan 80Mg Tablet , Tamoxifen 10Mg.Tab. , Tamoxifen 20Mg. Tab. , Tamsulosin 0.4Mg. Tab. , Temozolimide 100Mg. Cap. , Terbutanil Sulphate 1.5 Mg + Bromhexine 4 Mg + Guaiphensin 50Mg 100Ml Syp , Tetanus Toxoid0.5Ml Inj. , Tetanus Toxoid Inj 25 Units/ Dose 5 Ml Vial , Thiopentone Inj 0.5Gm Powder/Vial 20 Ml Vial , Thyroxine Sodium. 100Mcg, Tablet , Thyroxine Sodium. 25 Mcg, Tablet , Thyroxine Sodium. 50 Mcg, Tablet , Timolol Maleate 0.5% Eye Drops 5 Ml Vial , Tincture Iodine 450Ml , Tinidazole 300Mg, Tablet , Tinidazole 500Mg, Tablet , Tinidazole Susp. 150Mg/5Ml 60 Ml Bottle , Tissue Cell Culture Vaccines (Rabies Vaccine)Injection, 1 Ml Vial , Tobramycin 10Ml Eye Drop , Topical Phenylephrin Eye Drop 2.5 % 5 Ml Vial , Torasemideinjection,100Mg,/2Ml , Torasemide Tab 10 Mg , Torasemide Tab 10 Mg - , Torasemide Tab 20 Mg - , Tramadol100mg, Tablet , Tramadol50mg, Tablet , Tramadol Injection,(100Mg,/Ml) 2 Ml , Tramadol Injection,(50Mg,/Ml) 2Ml , Tranexamic Acid Injection, 5Ml Amp , Tranexamide Acid 500 Mg, Tablet , Trihexyphenidyl Tab 2 Mg - , Tropicamide Eye Drop1% 5 Ml Vial , Turpentine Liniment 400Ml , Turpentine Oil 400Ml , Urokinase Inj 5 Lac Iu/Vial Vial , Valethamate Bromide ( Epidosin ) Injection, , Vecuronium Inj 2 Mg/ Ml 2 Ml Amp , Verapamil Tab 40 Mg - , Vinblastine 10Mg. Inj. , Vincristine 1Mg./1 Ml Inj. , Vitamin A 100000 Iu 100 Ml Syp , Vitamin K1injection,(1Mg, /0.5Ml) , Warfarin Sodium- Tab 5 Mg , Water For Injection10 Ml Amp , Water For Injection5 Ml Amp , Water For Injection 2 Ml Amp , Xylometazolin 10Ml Nasal Drop , Zinc Sulphate 10Mg. Tablet , Zoledronic Acid 4Mg. Inj. , Anti Hemophilic Factor Ix Complex Coagulation Factor Ii,Vii,Ix,X Concentrate , Anti Hemophilic Factor Viii(250Iu Vial),Injection , Oseltamivir Ip 30Mg Cap. , Oseltamivir Ip 45Mg Cap. , Oseltamivir Ip 75Mg Cap. , Zinc Sulphate 20Mg. Tab. , Zinc Sulphate 20Mg. Syp , A - Scan Complete Set , A V Fistula Sterilized Twin Needle(16 G (Two Needle Pack) , A V Fistula Sterilized Twin Needle(17 G (Two Needle Pack) , Absorbant Cotton 500 Gm , Acess Cavity Preparation Kit , Acetone Kit , Acute Care Height Adjustable Icu Bed With Collapsible Side Railings, Product Should Be Ce Approved. Overall Size Should Be 2350Mm (L) X 1050Mm (W) X Height Adj. From 550Mm To 750Mm Should Be Made Uo Of 60Mm X 30Mm Crca Tubular Frame Work, With Four Section Perforated Crca Sheet Top. Back Rest, Knee Rest, Trendelenburg, Reverse Tredelenburg And Height Operated By Screw And Lever Mechanism With Four Separate Attached S.S. Folding Handles.Polymer Moulded Head And Foot Board, With Four Heavy Duty Swivel Castors Of 125Mm Dia (Two With Break)Should Be Pretreated And Epoxy Coated. , Adhesiv Plaster .Roll 7.5 X 9Mtr, , Air Cannula , Airotorburs Crown Cutting , Airotor Burs Cutting Prepratus , Alcohol Swab , Alkaline Phoshphate Kit , Ambu Bag, Siliconadult , Ambu Bag, Silicon Pead. , Amlgam Carrier , Anti A - B - D Grouping Serum 3X10ml , Anti A Lactin Sera 10Ml. , Anti B Lactin Sera 10Ml. , Anti D Lactin Sera 10Ml. , Antiseptic Solution 450 Ml , Apheresis Machine , Applanation Tonometer , Applicator Tips , Arch Bar , Artery Forcep Kocher, Straight Or Curved, S.S. 12.5Cm , Artery Forcep Kocher, Straight Or Curved, S.S. 15Cm , Artery Forcep Kocher, Straight Or Curved, S.S. 20Cm , Artery Forcep Mosquito, Straight Or Curved, S.S. , Artery Forcep Spencer Wells, Straight Or Curved, S.S. 15Cm , Artery Forcep Spencer Wells, Straight Or Curved,S.S.12.5Cm , Artery Forcep Fine For Optthalmic Use , Aruga Needle Holder , Aso Kit , Asrtin Moor Femur Head Prosthesis With Set Of Instrument Of Amp (Size - 37, 39, 41, 43, 45, 47, 49, 51) , Audiometer , Auto Refractometer , Autoclave Indicator Tape For Sterelization , Automatic Tourniquet 1. Should Be Light Weight, Portable, Compact With Tilting Stand.2. Should Be Microprocessor Controlled With Latest Digital Technology.3. Should Have Built In Air Pump For Safe And Leak Free Inflation.4. Should Have Lcd Display With Indicators Of Inflate, Deflate.5. Should Work On Main Ac Power And Internal Battery With Back Up Of 8 Hours.6. It Should Have Count Down Timer With Alarm.7. Should Have Audio-Visual Alarm To Detect High Leak And Disconnection, Pressure Deviation And Low Battery Indicator.8. Cuff Pressure Should Be 50-500Mm Hg, Wih Adjustment Of 5Mm Hg Steps.9. Automatic Pressure Regulation With -1 To +10 Mm Hg.10. Alarm Time With 0 – 250 Minutes, With Adjustment Of 1 Minute Steps.11. Three Different Sizes Of Imported Quality Material Should Be Provided 12. Minimum Warranty Should Be Of One Year.13. The Company Should Be Who-Gmp Certified With Iso 13485:2008. , A-V Blood Lines With Av Pressure Transducer(Acceptable For Fitting To All Standard Dialyzers ) With Side Tubing-(For Heparinization And Av Pressure Monitoring) Ce And Iso Certificate Essential With Protector For All Machines Types And Dialysers(Medical Grade Pvc Like Of Fresenius Bain (Dora), Dialife ,Nipro, B Raun Browndone,Biolight Or Equivalent Post-Pump Tubing Sets Options Medical Grade Clear Tubing Guarded Access Ports For Reduced Infection Risks Parts Of Superior Quality), , B - Scan Complete Set , B P Machine Bulb , B P Machine Cuff , B.B. Silk No. 0-1(1X12 Foil) , B.P.Apparatus, Led With Auto Pumpingisi Mark , B.P.Apparatus, Stand Model, Mercular Isi Mark , B.P.Handle No 3 Or 4, S.S. , Baby Resuscitation Trolley With Approx Size W 390Mm X D 800Mm X H 1080Mm With Stainless Steel Tray In Head Low Position With Three Modular Drawer System, Adjustable I.V. Rod, Oxygen Cylinder Cage, Adustable Examination Lamp, Bottom Trau For Mounting Suction Apparatus, Mounted On 100Mm Dia Castors, Should Be Pretreated And Powder Coated. , Baby Tray S.S. 12 X 15 , Baby Tray S.S. 15 X 18 , Ball Burnisher ( Pf-18) , Barber Thread No20.30,60.80 100 , Barium Chloride , Beading Wax , Bekesle Staight Forcep , Bekesle Uptern Forcep , Benidict Qualitative Reagent (5Litre) , Binocular Microscope , Bite Papers , Bite Planer , Blade Holder (11 & 15) , Blade Surgical Isi Mark Pkt Of 100 , Bleaching Materials , Blood Bag Tube Sealer , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(100 Ml),Bag , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(350 Ml),Bag , Blood Bank Refrigerator 300 Bag - Type Blood Bank Refrigerator Cabinet Type Upright Climate Class N Cooling Type Forced Air Cooling Defrost Mode Auto Refrigerant Cfc Free Noise Lever (Db) 43 Performance Temperature Range(?) 4±1.5 Control Controller Microprocessor Display Led , Blood Collection Monitor , Blood Len Set For Malaria , Blood Sugar Kit , Blood Transfusion Set , Bone Awl , Boyls Apprtus Anaeshta Complet Boyls Appratus Trolly Ssfitted With Four Castertrolly With Two Fronttwo Lockable Wheelprovision Table Top Tray At Eye Level For Keepingmonitroing Instumentprovosion To Fit Carbon Dioxide Absorbe Hypoxiguradlow Pressure Oxygen Audidle Failer Alarm Nao Cut Off Case Failer Of Oxigan Supply , Bristle Brush Ca , Broches Asst. , Bronchoscope Adult & Child , Broom , Btct Cappilary Tube , Bubble Cpap System With Low Air Compressor 1. Bubble Cpap Should Be Compliant With International Safety Regulations & Certifications – Us Fda And Ce Approved 2. Servo Controlled Humidifier To Provide Optimal Humidity, Alarms For Conditions Like High & Low Temperature, Humidity & Disconnections. The Humidifier Should Have An Option Of Selecting Non-Invasive And Invasive Modes 3. The Humidifier Should Display The Temperature Of The Gas And Have Option Of Measuring The Temperature Of The Gas Both At Chamber End And Near Patient End Of The Inspiratory Tubing 4. Should Have Flow And Temperature Sensing With Feedback Mechanism 5. The Patient Circuit Should Have Spiral Heater Wire To Minimize Rainouts/Condensation6. Cpap Generator With Adjustable Cpap From 3 To 10 Cmh2o With Generation Ofbubbles 7. Safety Provision For Maximum Pressure Limiting In Case Of Occlusions8. Manifold With Facility Forpressure Monitoring &Fio2 Monitoring 9. Non – Invasive Interface Should Include Nasal Tubing, Nasal Prongs Of Silicon, Infant Bonnets / Caps Of Different Sizes To Secure Nasal Tubing & Prongs 10. Unit Should Be Supplied With Mobile Pole With Castors , Mounting Brackets & Iv Hook 11. Unit Should Be Supplied With Proper Demonstration & Setup Guides 12. Patient Tubing Should Be Supplied Along With Auto –Feed Humidification Chamber With Dual Float Mechanism To Maintain Constant Compressible Volume.13. Low Air Compressor Compatible With Bubble Cpap System. , Bulnt Tip Scissors , Bun Membrane Caps,3/Pkg:Ccx , Bur Block , C.C. Screw (35Mm, 40Mm, 45Mm, 50Mm, 55Mm, 60Mm, 65Mm, 70Mm, 75Mm) , Calibrator Cartridge For Ccx , Calicum Hydroxidecement , Calicum Hydroxidecement Liquid , Calicum Hydroxidecement Powder , Cannula Fixator Made Of Elastic Adesive Bandage Single Sterile Pack Use To Fix Cannula , Capalary Tube , Capsuleorexsis Forceps , Card Clamp , Carobolic Acid (Phenol) Chemicla Name : Phenol Chemical Structure : C6h50h Molecular Wt 94.11 Melting Point : 40 C+2, Purity : 99.5% , Casualty Trolley With Approx Size L 1980Mm X W 710Mm X Height Adjustable From 700Mm X 890Mmshould Have Two Sections Removable And X Ray Permiable Strecher Top, X-Ray Cassate Holder, With Trendelenburg / Reverse Tredelenburg And Height Asjustment, Oxygen Cylinder Cage, I.V. Rod, Stainless Steel Swing Away Type Side Railings, Four Heavy Duty Swivel Castors Of 125Mm Dia. Two With Breaks, Buffers At Four Corner, Should Be Pretreated And Epoxy Powder Coated , Catgut Chromic0-1Pkt Of 12 Foil , Catgut Chromic 0-2 Pkt Of 12 Foil , Cautery Machine Complete Set , Ccx Control 1,2,3,Packing (30 Vails) , Ccx Control 4,5,Packing (20 Vails) , Ccx Control 7,8,9,Packing (30 Vails) , Cell Clean For 5-Part Hematology Analyser (Model : Sysmex Xs-800I (Japan))(Pack Size 50 Ml) , Cell Pack For 5-Part Hematology Analyser (Model : Sysmex Xs-800I (Japan))(Pack Size 20000 Ml) , Cement Spatala , Centrifugal Machine 8 Tube Table Top , Centrifuge Machine 6 , Cervical Traction (Manual) , Chair Unit (Ophthalmic) Complete Set , Chalazion Clamp , Chalazion Cureta , Chlorhexidine Irrigation Solution , Cholesterol Hdl Direct 5X20ml , Cleaner (M53) 1000 Ml , Cleaning Solution Abg Bottle , Clinic Micromotor/Air Motor , Coloimeter , Composite Filling (Teflon) Instrument , Composite Ploshing Kit , Composite Syringe Organiser , Computer Printer , Contineous Passive Motion Machine , Cordless Battery Operated Dril Machine Complete Set , Corneal Forceps , Corneal Needle Holder , Corneal Scissors , Cortical Screw 4.5Mm (12M.M., 14 M.M., 16 M.M., 18 M.M., 20 M.M., 22 M.M., 24 M.M., 26 M.M., 28 M.M., 30 M.M., 32 M.M., 34 M.M., 36 M.M., 38 M.M., 40 M.M., 42 M.M.) , Cosumable Of Hemostar-Xp,1.0 (Hemostasis Analyser) , Cover Slip 22X50 & 22X40 , Cpk-Mb Kit , Crash Cart Anesthesia Emergency Cart Mild Steal Epoxy Powder Coated Tubbular Framework On 4X12.5 Cms Swivel Casters Two With Braks Two Modular Storage Poly Cabinets With Three Locable Drawers In Each Six Poly Handout Removable Coloured Bins Two Shelves With Three Side Gruardrails One At Top Of Polycabinets And The Other At Bottom For Placing Ventilators /Ecg /Defibrillator Suction Etc Fixed With Overhead Ss Shelf For Placing Small Monitors Or Other Items Provided With Retractable Cardiac Message Board I.V. Transfusion Pole And Flexible Task Lamp 5/15 Amp Plug With Switch Powder Coated Oxycage And Corner Buffers , Creatinine Membrane Caps,3/Pkg:Ccx , Cresent Blade , Cross Cheak Slide Stand , Crown Cutting Bur Kit , Crown Prepation Set , Crp Quantitative Kit , Csf Analysis Kit , Culture Plate Glass , Culture Swab Tube , Culture Tubeflate Bottom 30Ml , Culture Tubeflate Bottom 5Ml , Cvp Line Complete Set , Cyanemeth Solution For Hb , D&C Set , Dcp Plates 4.5Mm Brad (6 Hole, 8 Hole, 10 Hole, 12 Hole) , Dcp Plates 4.5Mm Narrow (6 Hole, 8 Hole, 10 Hole, 12 Hole) , Dcs Plate 95 (4 Hole, 5 Hole, 6 Hole, 8 Hole, 10 Hole) , Delivery Tray , Delivery Trolly Ss , Dengue Elisa Test Kit , Dengue Rapid Test Kit , Dental Airotar Hand Piece , Dental Extraction Forceps Complete Set- Ash (A) Forcep For Maxillary And Mandibular Antier Teeth (B) Forcep For Maxillary And Mandibular Pemolars (C) Forcep For Maxillary And Mandibularmolarss (D) ) Forcep For Maxillary And Mandibularroot Forcep (E) ) Forcep For Maxillary And Mandibular Cowhorn Forcep (F) Maxillary Bayonet Forcep , Dental Intra Oral Camera# Image Formats:Pal Or Ntsc # Power Supply: 5V±0.5V1500ma) # Digital Photographic :1/4Sony Had Ccd # Lighting: 6Xleds Led # Handle The Weight:0.036Kg # Handle Wire:200Mm # Highlights Scope:3Mm-40Mm # Image Freeze-Frame:Pedals Manual Button # Mode:Eight Full-Screen Image Or A Quarter Of Georgia # Interfacevga Monitor Or Usb Interface Pedals , Dental Laser Soft Tissue , Dental Loop , Dental Plaster , Dental Store , Dental Ultra-Sonic Scaller , Dental Unit With Motor For Dental O.T. Complete Set , Dentin Conditioners , Deppen Dish , Deproteinnizing Solution Abg Ampoules , Desensitizer , Detergent Powder 1 Kg , Detergent Soap 200 Gm , Dhs Plate Long Barrel With Slot (125 4 Hole, 6 Hole, 8 Hole, 10 Hole,) , Dhs Plate Long Barrel With Slot (130 4 Hole, 5 Hole, 6 Hole, 7 Hoel, 8 Hole, 10 Hole,) , Dhs Plate Long Barrel With Slot (135 4 Hole, 5 Hole, 6 Hole, 7 Hoel, 8 Hole, 10 Hole,) , Dhs Plate Long Barrel With Slot (140 4 Hole, 5 Hole, 6 Hole, 7 Hoel, 8 Hole) , Dhs Plate Long Barrel With Slot (145 4 Hole, 5 Hole, 6 Hole, 7 Hoel) , Dializer Adult For Dialysis , Dialysis Starting Kit Disposable:A)Sterile Tray With Top(Disposable),Size Not Less Than 30X30cm B) Sterile Drape Size Not Less Than 45X45 Cm 1No C) Cotton Ball 6 No D)(D) Cotton Gauze Pieces 1,E) Artery Forceps-1 No , Diamond Carver , Diamond Fg Burs , Di-Electric Tube Sealer , Digital Haemoglobinometer -Microprocessor Based Digital 2 Working On Cyanmeth Haemoglobin Principals 3 It Is Having 5 Operation Keys On Board.3 It Measures Direct Reading Of Hemoglobin After Feeding The Set Value Of Standard Once. 4 It Is Light In Weight And Body Made Of Abs Plastic Molding. 4 Measuring Range -0 To 30Gdl 5 Display 3 Digit 7 Segment Led 5.Key Pad-Soft Touch Membrance Type 6 Zero Setting-Automatic 7 Sample Volume-1.0 Ml 8 Calibration-Automatic With Standard , Digital Microsope , Diluent (M53) 20 Litre , Disp. Syring 1Ml. , Disposable Amniotic Fluid Collection Spillage Free Sac , Disposable Blade Needle 26 No. , Disposable Cup For Urine-Sputum , Disposable Face Mask (Three Layer) , Disposable High Absorbent Lscs Drape Sheath With Self Adherent Incisional Window , Disposable Operation Kit, Large , Disposable Operation Kit, Small , Disposable Pateint Body Cover With Six Holders, Weight Bearing Capacity>125 Kgs , Disposable Plasticbed Sheets 90Cm X 200Cm , Disposable Sterile Gloves 6 No Per Pair Isi Mark , Disposable Sterile Gloves 6.5 No Per Pair Isi Mark , Disposable Sterile Gloves 7 No Per Pair Isi Mark , Disposable Sterile Gloves 7.5 No Per Pair Isi Mark , Disposable Sterlizedkelleys Paid , Disposable Surgeon Cap , Disposable Surgeon Gown , Disposable Syringe 10 Ml , Disposable Syringe 2 Ml , Disposable Syringe 3 Ml , Disposable Syringe 5 Ml , Disposable Syringe 50 Ml , Disposale Hivkit , Distril Water 5 Litere , Donor Couch , Door Mate Plastic , Double Human Zuglar Cathater , Double Lumen Blood Bag 350 Ml , Double Oxygen Concentrator, Ele 220V :- 1. Oxygen Concentrator To Provide From Ambient Air. 2. Oxygen Concentration Measured At The Flow Meter By Oxygen Sensing Devise (Osd) .3.Sound Level <15Db. 4. Superior Grade Of Molecular Sleve. 5. Maintenance Free Rotary Proppet Value. 6. Oxygen Purity Approx 90%. 7. Oxygen Output Approx 0-5 Lpm. 8. Pressure Approx 8 Psl. 9. Double Oylet Or Flows Plitter For Oxygen Delivery . 10. Oxygen Tube Of 2 M Length Must Be Provided With. 11. Facility For Nebulization With Tube & Mask. 12. With Two Hmidifier Bottles And Two Cabinet Filters. 13. Power Requirements : 220V/50Hz . 14.Power Consumption : 450W. 15. Device Is Produced By Iso 9001 Certified Manufacturer. 16. Device Is Safety Certified According According Ce/Fda Or Equivalent. 17. Supplied With Accessories. A. 1X Spare Set Of Tubing. B. 1 X Spare Set Of Internal And External Filters. C. 1 X Spare Set Of Fuses. D. User Manual With Trouble Shooting Guidance In English. E. Technical Manual With Maintenance And First Technical Intervention Instructions, In English. , Dressing Forcep 1X2 Teath , Drill Beat (2.5Mm, 2Mm, 3Mm, 3.5Mm, 4Mm, 4.5Mm) , Drill Bit 1.5 Mm , Drill Bit 1Mm , Dropping Bottle 500Ml. (Special Medical Grade Polypropylene Translucent) , Dylazer & Tubing Set For Adult , E C G Paper Roll110mm X 20 Mtr , Edta Powder 100 Grms , Edta Solution 10% 500Ml. , Elbow Tape , Electrocoutry , Emergency Drug Tray , Enders Flaxible Nails All Size , Endo Box , Endo Filling Remover , Endo Motor & Rotary Propar Apex Locator , Endodontic Filling Material Ah-26 , Endodontic Sealer , Endoscope0 , Endoscope30 , Endoscope70 , Endoscope Scissor , Endotreacheal Tubesize4.5 Uncuffed , Endotreacheal Tubesize5 Uncuffed , Endotreacheal Tubesize 2.5 Uncuffed , Endotreacheal Tubesize 3 Uncuffed , Endotreacheal Tubesize 3.5 Uncuffed , Endotreacheal Tubesize 4 Uncuffed , Endotreacheal Tubesize 5.5 Uncuffed , Endotreacheal Tube Adult Size 10 , Endotreacheal Tube Adult Size 11 , Endotreacheal Tube Adult Size 12 , Endotreacheal Tube Adult Size 7 , Endotreacheal Tube Adult Size 8 , Endotreacheal Tube Adult Size 9 , Engine H-Files Asst. , Enlarger Blad 5.2 , Ent Cautary Machine , Ent Diagnostic Set Complete With Rechargeable Handle And Charger, Should Have Reusable Specula Of 3 Different Sizes, Toungue Depressor For Disposableblades, With Straight Laryngeal Mirror, Spreadable Nose Speculum And One Spare Bulb In Case, Warranty 5 Years , Ent Micromotar Drill Machine , E-Nucleation Scissors , E-Nucleation Screw , Eosin 125 Ml , Episiotomy Tray , Equipment For Adult Resuscitation , Equipment For Neonatal Resuscitation , Erba Wash Reagent , Esr Needle , Esr Stand , Esr Tube , Esr Tube Fine Quality , Esr Wintrobs Tube , Examination Couch183cm X 51Cm X 75Cm With Ss Top 1. Size Of Couch – L1830mm X W 575Mm X H850mm 2. Frame Should Be Made Up Of Crca Rectangular Tubes And Cabinets With Crca Sheets.3. Should Have Four Cabinets, One Cabinet And One Drawer Should Be Provided With Lock 4. Should Have Sliding Writing Facility And Stepping Stool 5. Should Be Pretreated And Epoxy Powder Coated , Excavator Descoid (No.131/132) , Excavator Spoon (No.220/221) , Exercise Bicycle Standard , Eye Donation Set Complete , Eye Shield- Triple Layered Neonatal Eye Protector With Adjustable Harnace Size, Light Wavelenght420-520Nm , Circumference Size 28-54 Mm , Eye Specullam , Eye Speculum Ig-1010 Adult Size 14Mm Blades, Spread 52Mm., Ig-1011 Child Size 11Mm Blads, Spread 41Mm. (Williams) , Falken Tube : 50 Ml. (White Transparent Sterilized) , Falken Tube Stand , Feeding Tube 5 No. , Feeding Tube 8 No. , Femur Interlocking Nails With Set Of Guide Wire Flexible Reamer Set 34Cm X (8Mm, 9Mm, 10Mm, 11Mm, 12Mm) Locking Bolt Accordingly , Femur Interlocking Nails With Set Of Guide Wire Flexible Reamer Set 36Cm X (8Mm, 9Mm, 10Mm, 11Mm, 12Mm) Locking Bolt Accordingly , Femur Interlocking Nails With Set Of Guide Wire Flexible Reamer Set 38Cm X (8Mm, 9Mm, 10Mm, 11Mm, 12Mm) Locking Bolt Accordingly , Femur Interlocking Nails With Set Of Guide Wire Flexible Reamer Set 40Cm X (8Mm, 9Mm, 10Mm, 11Mm, 12Mm) Locking Bolt Accordingly , Femur Interlocking Nails With Set Of Guide Wire Flexible Reamer Set 42Cm X (8Mm, 9Mm, 10Mm, 11Mm, 12Mm) Locking Bolt Accordingly , Femur Interlocking Nails With Set Of Guide Wire Flexible Reamer Set 44Cm X (8Mm, 9Mm, 10Mm, 11Mm, 12Mm) Locking Bolt Accordingly , Fetal Heart Doppler Digital , Field Stain - A , Field Stain - B , Filter Paper Whatmann , Fixation Forceps , Fluoride Varnish , Fnac Syring , Foetscope/Doppler , Fogging Gun , Foldable Iol Sterile Lens Pc+14D(Lens-2), , Forcep Artery(Straight And Curve )Large Size , Forcep Artery(Straight And Curve ) Medium Size , Forcep Artery(Straight And Curve ) Smallest Size , Forcep Kocher Artery6 , Forcep Kocher Artery7 , Forcep Kocher Artery8 , Forcep Masquito Artery Forcepno 5 , Forcep Masquito Artery Forcepno 6 , Forcep Masquito Artery Forcepno 7 , Forcep Masquito Artery Forcepno 8 , Forcep Needle Holder Mayos Hegar, S.S. 12.5Cm , Forcep Needle Holder Mayos Hegar, S.S. 15Cm , Forcep Needle Holder Mayos Hegar, S.S. 20Cm , Forcep Sponge Holding Ss , Forceps Babcock , Forceps Dissecting , Plain, S.S 12.5Cm. , Forceps Dissecting , Plain, S.S 15Cm. , Forceps Dissecting , Plain, S.S 20Cm. , Forceps Dissecting , Tooth , S.S 12.5Cm. , Forceps Dissecting , Tooth, S.S 15Cm. , Forceps Dissecting , Tooth, S.S 20Cm. , Fouchet Reagent , Fractur Table , Funnel (Plastic) , Funnel 3 , G. P. Point Cutter , G.P.Points 15-40,45-80 , G.P.Stick , G6pd Defficiency Kit , Gadius / Vins Nails (20Cm To 26 Cm - 2.5Mm, 3Mm, 3.5Mm) , Gate Drillasst. , Gelly E C G 200Gm , Gelly Ultra Sound 200Gm , General Utility Chart , Gic - High Streangth , Glass Battal R.C. , Glass Bead Sterilizer , Glass Flask -50 Ml , Glass Flask-100Ml , Glass Funnel / Flask / Measuring Cylinders , Glass Inomor Cement Type-1 , Glass Inomor Cement Type-2 , Glass Inomor Silver Reinforced , Glass Marking Pencil , Glass Slab , Glass Syring (No. 26) , Glass Tube For Centrifugal Machine Graduated , Glass Tube For Centrifugal Machine Plane , Glass Wares Beaker 100Ml , Glass Wares Beaker 250Ml , Glass Wares Beaker 50Ml , Glucometer Lancet , Glucometer Strips , Glucose (Godpod)10 X200 Ml Lyphozyme 10X200ml , Glucose Membrane Caps,3/Pkg:Ccx , Glutaraldehyde Solution 2% In 5 Litre Can (2 Strips/Vials Per Each Can)(5 Litre Can), , Greenstick , Gum Paint100 Ml , Gum Paint450 Ml , H C V(Elisa)1X96 , H C V (Rapid) Per Card , H I V Rapid Test Card , H2so4acid 20 % , Haemoglobinometer Tube , Hand Dryer Machine , Hand Piece Micro Motor , Hand Pieces For Airotor Mini Head , Hand Pieces For Airotor Torque , Hand Pieces For Mm C/A , Hand Pieces For Mm Straight , Hbsag (Elesa) 1X96 , Hbsag (Rapid) Per Card , Hcl No. 10 1X500ml , Heamoglobin Pippets , Heamoglobin Tube Graduated , Hemodialysis Fluid For Bicarb Made , Hemoglobin (Sahllis Method) , H-Files 15-40,45-80 , High Resolotion Microscope , Hivkit Sterile :- Face Mask, Gown, Head Cap, Polytheren Drape, Surgical Gloves, Surgical Shoe Cover, Goggle, Waste Carry Bag, Towel. , Hiviral Tm Transport Kit (A) (Vtm Kit) , Hollenbacks Carver , Holter System- 4 Leads: 3 Ecg + Transthoracic Impedancepacemaker Pulse Detection Integrated Impedance Monitoring The Transthoracic Impedance Lead Can Be Used For (1 ) Screening Central Apneas (2) Or Evaluating Degree Of Activity. 2, 3 Or 12 Ecg Channels. Additional Simultaneous Pacemaker Information And Trans-Thoracic Impedance. Recording Over A Period Of Up To Ten Days. Storage Of Signals On A Flash Card With A Capacity Of Up To 2 Gb. 12 Bit Signal Resolution And Up To 1024 Hz Sampling Rate. Automatic Testing Of Battery Voltage On Start-Up. Open Lead Monitoring Of Electrodes. Data Protected Even When Battery Is Removed. Bluetooth® Wireless Technology For Bi-Directional Data Transfer. Data Import And Export Using The Hl7 Standard. Bdt-/Gdt Interface. Xml Interface. Ascii Format Import Of Telemetry Data. Secure Data Transfer Via The Internet And Network Connections. Editable Qrs And Event Classification, Arranged In Hierarchical Order According To Severity. Automatic Event Scanning With Configurable Sorting Criteria. Heart Rate Variability (Hrv) In The Time And Frequency Domain. Atrial Fibrillation Analysis In The Time And Frequency Domain. 12 Bit Signal Resolution And Up To 1024 Hz Sampling Rate. , Holter System :- 1.Holter System Provides For 24/72 Hours Of Continuous Ecg Recording And Anlysing For Detecting Heart Rate Abnormalities Which May Oherwise Go Undetected Minimum 3 Channles. 2. Able To Record 24/72 Hours Of Ecg Waveforms On Small Holter Recorders. 3. Automatically Detect And Quantify Different Ventriculer And Supraventricular Events. 4. The System Pc Based With Pc Specifications Of Latest Industry Standard. Usb: Universal Serial Bus Pot. Monitor : Color Super Vga 17 Flat Monitor Capable Of Displaying 1280X1024 Resolution. Printer: Hp Laser Jet 2300 Or Higher. Slot: Minimum One Free Pci Expansion For Card Reading. Software: Windows 2000 Oprating System Or Higher. Should Be Supplied With A Desktop (1No) And A Lap Top Computer (1No) Shell Be Latest Industry Standard With Atleast 5 Years Service Backup. 5. Provide Continuous 12 Lead Ecg Capability That Allows Viewing And Printing Of A 12 Lead Ecg From Three Channel Ecg Recording At Any Time During The 24/48 Hour Recording. 6. Employ Multiple Analysis Modes Including Prospective Paging And Superimposition Retrospactive And A Combination Of Retrospective And Prospactive Modes That Analysis Normal Ecg And Isolated Abnormals Automatically But Stops On Complex Arrhythmia. 7. Analyse Three Leads Og St Segments With St Episode Reporting And Heart Rate Variability On Time And Frequency Domain. 8. Provide Unlimited Normal Abnormal And Artifact Templatect With Automatic Classification, Template Matchingand Ability To Merge / Unmerge On Any Template. 9. Automatically Detect And Quantify Different Ventricular And Supraventricular Events. 10. Automatically Stop On And Display Arrhythmia Patterns Patient Diary Entries And St Episodes. 11. Provide A Histogram To View All R To R Intervals All Normal To Normal Intervels All Normal To Ventricular Intervals All Ventricular To Normal Intervals And All Ventricular To Ventricular Intervals. 12. Provide Qt And Pacemaker Analysis. 13. Create Custom Reports Templates With Institutions Logo 3.11 Trend Graphs - Hr Rr Interval Rr Variance 12 Lead St Svpb Vpb. 14. Recorder Spscification: 1. Weigh No More Than 100 Grams With Battery And Flash Memory Installed. 2. Acquire Simultaneous Three Channel Ecg With Software To Convert Three Channels To 12 Lead Ecg In The Scanninng Device 3. Come With Packmaker Software That Automatically Removes Pacing Artifacts And Annotates The Recording With Pacing Pulses. 4.Store 24 Or 48 Hours Of Ecgc With No Data Compression. 5. Use Aa Alkline Battery To Provide Up To 48 Hours Of Three Channel Recording. 6. Lcd Display O Fthe Patient Ecg During Hook Up To Verfy Proper Electrode Application. 7. Use Only 5/7 Electrodes To Record A Three Channel Ecg. 8. Synchronize The Recording Start And End Time With The Recorder Time Clock . 15. Pc With Pentium Iv Configuration. 16. Printer (Ho Laser Jet 2300 Or Higher/Equivalent. 17. Holter Analyser Software. 18. Holter Recorders. 19. Patient Cable . 20. Resettable Overcurrent Breaker Fitted For Protection. 21. Ups Of Suitable Rating Conforming To Is-302 For Computer System. 22. Fda Or Ce Approved Product. 23. User And Servies Manual In English. 24. Log Book With Intruction For Daily Weekly Monthly And Quarterly Maintenance Shecklist . , Hot Water Bag Made Of Rubber Material Usful For Natural Body Warmer & For Heat Treatment Therapy Single Pc Pack Std. Size , Hummer 250G , Hummer 500G , Hydro Dissection Cannula , Hydrochloric Acid (Sarafine 35-38% Molecular Wt. 36-46) , I U D Kit ( Sponge Holding Forcep 1 , Artery Forcep Straigh 6 1,Tenaculam Forcep 11 1, Vulsalum 10 1, Dressing Scissor 6 1,Utairine Sound 1,Vaginal Wall Retractor 1, Dissecting Forcep 1X 2 Teath 10 1, Disecting Forcep 1X2 Teath 6 1,Sims Spaculam 1 ,Cusco Spaculam Small 1,Cusco Spaculammedium 1 , Ss Boul 1 Ltr , Surgical Tray 10X121, Surgical Sterilized Gloves 6 No In Raxine Bag Size 15X12 , I/A Simco Cannula , I/V Canula 18 No , I/V Canula 20 No , I/V Canula 22 No , I/V Canula 24 No , I/V Canula 26 No , Immersion Oil 30Ml , Impression Compound , Impression Trays , Incubator , Indo-Motor With Hand Piece , Infant Resuscitator T-Piece Mechanical Device With Gas Supply Line, Test Lung, Resuscitation Kit And Neonatal Resuscitation Mask, Should Be Compliant With International Safety Regulations & Certifications – Us Fda And Ce Approved , Infrared Thermometer , Insuline Syring , Intraoral Camera , Intravenous Set (Adult) With Airway And Needle , Intravenous Set (Children) With Airway And Needle , Iodine Solution 500Ml. , Iol Pmma , Irimation Vectis , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Equ. To Ferrous Iron 100 Mg And Folic Acid 0.5 Mg (Blue Tablet) , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Ip Eq. To 45 Mg Elemental Iron And 400 Mcg Folic Acid Ip (Pink Color) - Wifs Junior , Iron And Folic Acid Enteric Coated Tab. Ferrous Sulphate Ip To Ferrous Iron 100 Mg & Folic Acid Ip 0.5 Mg Granules (Red Tablet) , Iron Box Full Size (Palng Pati) , K File 10 No. , K File 15 No. , K File 20 No. , K File 25 No. , K File 8 No. , K-3 Edta Tube Plastic , Kalsogen , Karoton Blade 2.8 Mm , Keratometer , K-Files 15-40,45-80 , Lab Incucator , Lachrimal Probe , Lacron Carver , Lactate Membrane Caps,3/Pkg:Ccx , Lance Cleaning Paper , Lancet Blood Sterilized , Laryngoscope - Direct , Latex & Pvc Free Three Chambered Bag 625 Ml (740 Kcal) With Mct Lct Ration 1:1 For Central Venous Infusion , Lecorn Carver , Led Head Light With Illumination Of 50000 Lux At A Working Distance Of 250Mm, Should Have Led Operating Life Of Minimum 40000 Hours And Power Source, , Leishman Stain 500Ml , Leishman Stain Powder 25 Grms , Leishman Stand Kit , Leminar Air Flow Beanch , Lens Cleaning Paper Book (For Microscope) , Lens Holding Forcep , Lens Holding Forceps , Leo -I Lyse (M53) , Leo -Ii Lyse (M53)400 Ml , Lh Lyse (M53)500 Ml , Light Care Unit With Composite With Finishing With Poloshing Burs , Light Cure Bonding Materials , Light Cure Composite Anterior , Light Cure Composite Flowable , Light Cure Composite Posterior , Light Cure Composite Universal , Light Cure Unit , Lignocaine Spray , Lint Cloth Per Meter , Liquid Paraffin 500 Ml Bottle , Locking Bolt Accordingly Tibirl Inter Locking Nails (28Cm - 7Mm, 8Mm, 9Mm, 10Mm) , Locking Bolt Accordingly Tibirl Inter Locking Nails (30Cm - 7Mm, 8Mm, 9Mm, 10Mm) , Locking Bolt Accordingly Tibirl Inter Locking Nails (32Cm - 7Mm, 8Mm, 9Mm, 10Mm) , Locking Bolt Accordingly Tibirl Inter Locking Nails (34Cm - 7Mm, 8Mm, 9Mm, 10Mm) , Locking Bolt Accordingly Tibirl Inter Locking Nails (36Cm - 7Mm, 8Mm, 9Mm, 10Mm) , Locking Plates With Locking Plating Set With Locking Screw For Aem, Femur, Tibia , Long Nasal Nipple Bottle , Low Pressure Extension Tube 150Cm , Lower Femoral Londy Lar Plate Rt & Lt (6 Hole, 8 Hole, 10 Hole) , Lris Reposeter , M.R.Syringe With Cannula , Magnifine Glass , Malaria Pf/Pv Antigen Card , Mallevlar Screw (40 Mm, 45 Mm, 50 Mm, 55 Mm, 60 Mm, 65Mm) , Man Power Drill Machine 2 , Mantoux Test Kit , Masquito Repellent , Mastaid Burr Size 3 Mm Ear Suction Canula , Mastaid Burr Size 4 Mm All Size , Mastaid Burr Size 5 Mm , Mastaid Burr Size 6 Mm , Mastred Forcep Audlt , Mastred Forcep Child , Maternal Monitor 1.Unit Should Be Featured With 12.1” High Resolution Colour Tft Display With Tiltable Screen 2. Should Have Standard Configuration – Fhr, Toco, Foetal Movement, Ecg, Spo2, Nibp, Respiration, Temperature With 25 Hrs Storage 3.Company Should Be Iso Certified With Service Centersin M.P. , Matrix (Celluloid) Stripes , Matrix Bands No.1&8 , Matrix Retainer No-1 , Matrix Retainer No-8 , Maxillotacial Trauma Kit , Mcpherson Forceps , Measuring Cylinder Glass 100 Ml , Measuring Cylinder Glass 1000Ml , Measuring Cylinder Glass 500 Ml , Measuring Tape , Medicine Storage Rack 77X36X18, Four Shelves, Three Side Covered With Sheet 18 Gaze Weight 50 Kg & Avobe , Medicine Tray , Mendrill Screw C/A , Mendrill Screw Sand Paper , Mendrill Screw Spinal , Mendrill Screw Straight , Mercury Managament Kit , Methylated Spirit (Chemical Name : Ethanol Denatured + 5% Isopropyl Alcohol +5% Methanol Molecular Structure : C5h50h, Molecular Wt : 46.07, Purity : 90% , Methylen Blue 500Ml (Chemical Name : Methylthionine Chloride Chemical Structure C16h18c1n3s Molecular Wt 319.9 Dye Content Approx 82% Should Be Available On The Container , Methylene Blue Powder 25Gm Merck , Micro Drip Volume Set (Pead.) , Micro Pippet 200-1000 Micro Liter , Micro Pippet 50-200 Micro Liter , Micro Pippet 5-50 Micro Liter , Micropipette 100-1000 , Micropipette 10-100 , Micropipette 1-10 , Micropipette 200-2000 , Microscope Bulb , Microscope Lence 24X40 , Mobile O.T.Light Ledsingle Reflector Light.20 Dome Abs Plastic. Bulp 24- 150Watt.Digital Control Panel Intnsity , Moldeing Wax , Mortar & Pestle , Mouth Opener , Mouth Probe , Mucus Extractor , Mva Tray , N.S.V.T. Kit , N95 Mask (Particulate Respirator) (Respirateur Contre Les Particules) (Respirador Contra Particules) , Napthalene Ball , Nasal Catheter , Nasal Probe Prediatric , Nasal Prong Preterm , Nasal Prongs (Neonatel ) , Nasal Suction Cannula , Needle Holder 12 , Needle Holder 15 , Needle Holder 8 , Needle Suture Silk 3-0 , Nerve Locator 1. Should Have Sensory Mode Ti Identify Sensory Nerves Like Glossopharyngeal Nerve, The Maxillary Branch Of Trigeminal Nerve And Other Sensory Nerve To Be Blocked In O.R. And Pain Clinic.2.Should Have A Pulse Width Range Between 50 To 990Msec For Motor & 40 To 200Msec For Sensor3. Current Range Should Be 1 To 20Ma In Steps Of 1Ma For Motor And 0.1 To 10Ma In Steps Of 0.1 Ma. 4.Frequency Range Should Be 0.1 To 99 Hz With Default Of 1 Hz. 5. Minimum Warranty Should Be Of One Year.6. The Company Should Be Who-Gmp Certified With Iso 13485:2008. , Nerve Stimulator1. Should Have Audible Alert Tone 2. Should Be User Programmable For Continous Monitoring Of Tof And Tw From 1 To 30 Mins. 3. Should Have Built In Calculation Of Supra-Maximal Current With Special Alogorithms 4. Twitch (Tw) With Feature – On Demand/Repeat At 1 Sec And At 10 Sec 5. Train Of Four (Tof) With Feature – On Demand / Repeat At 10 Sec 6. Should Have Feature Of Tetanus ( 50 Hz ) (Tet), Double Burst Stimilation (3:3) (Dbs) And Post Tetanic Count (Ptc). 7. Minimum Warranty Should Be Of One Year. 8. The Company Should Be Who-Gmp Certified With Iso 13485:2008. , New Baal Chember , Newmetric Tronicate , Niti Fles Files 15-40 , Nitros Oxide Cylender Complete Set , Non-Invasive Bilirubin Analyzer1. A Poct Instrument For Non-Invasive Measurement Of Total Serum Billirubin Levels For Neonates.2. Should Have No Pain, No Trauma, No Risk Of Infection And No Hazardous Waste3. Should Be Able To Perform During And After Phototherapy.4. Should Be Able To Perform During Age (24-42 Weeks) And Post-Natal Age (0-20 Days).5. Measuring Range Should Be Between 0-20 Mgdl.6. Should Have Accuracy Of + Mgdl & Standard Deviation (Instrument To Instrument Repeatability) Should Not Be More Than + 0.66 Mgdl.7. Weight Of Instrument With Battery Pack Should Not Be More Than 356 Gm.8. Instrument Should Have Rechargeable Battery Of Life Minimum 1 Year And Measurement Per Full Charge Must Not Less Than 100 .9. Should Have Tungsten Bulb As A Light Source For Minimum Life Of 30,000 Measurements.10. Should Have Fda Approval, Ce Marked Certificate And Published Independent Clinical Studies.11. Accurate Results In Standard Clinical Units Regardless Of Race Or Gestational Age.13. No Need To Perform Separate Analysis Or Refer To Conversion Tables. , Normal Delivery Set , O.T. Table - Manual Complete Set , O.T. Table - Orthopedic Complete Set , Obstetric Labor Table, 183Cm X 77Cm X 76Cm Ss Top Steel Sheetwith Leg Gardiv Stand Ans Wast Bucket Ss & Raxine Matress , Obstetric Labor Table, 183Cm X 77Cm X 76Cm Ss Top Steel Sheetwith Leg Gardiv Stand Ans Wast Bucket Ss & Raxine Matress , Odd Single Jar Suction Machine , Operating Microscope , Operation Table Orthopedic1. Complete Hydraulic Control System With Hydraulic Imported Components, The Machine To Achieve Low Noise, High Security And Reliability.2. T Shaped Base Design, Providing Doctors With More Legroom, And Reduce The Fatigue Of The Long Surgery.3. Widened Table Width To Fit The Clinical Needs. The Table Is Divided Into Four Activity Segments,Respectively, For The First Board, Backplane, Hip Plate, Leg Plate.4. With Bed Movement Adjustment Automatically Lock System, To Improve The Clinical Safety.5. With A Key Reset Function, To Facilitate Operate The Operating Table.6. The Overall Table Is All The Sus304 Stainless Steel. Base, Pillar Guard, All With High- Ality 304Stainless Steel, Mattresses With Decompression, Memory, Flame Retardant Function Caneffectively Prevent Bedsores.7. Leg Panels Can Be Folded Forward, Outreach But Also Removable, Adjust Very Convenient Urinary Surgery, Kidney Bridge Does Not Affect The X-Ray Fluoroscopy, While Convenient To The Gallbladder Kidney Surgery.8. Translation Function Of The Large Size 550Mm Extra-Wide Bed Design, Through X-Ray Area Large,To Facilitate Small And Medium-Sized C-Arm Film.9. Operating Table Base Has A Fixed Or Mobile Functionality, Flexible And Mobile, Fixed And Reliable,With 304 Stainless Steel Accessories For A Variety Of Functions To Suit The Different Needs Of The Surgery.10 .Built-In High- Capacity Battery , No External Power Supply When Used To Increase The Operation Safety.11. With Non- Slip Floor Side Rail Safety Design To Prevent The Attachment Falling, In Case Of Injury.12. Can Be Upgraded To Configure The Same Brand As A Whole Vacant Orthopedic Traction Frame.13. Machine Design In Line With Iec60601-2-46, Attachment With Various Functions To Suit The Different Needs Of Surgery. , Ophthalmscope , Opthalmoscope - Direct , Opthalmoscope - Indirect , Oral Surgery Extraction Forceps , Orthodentic Kit , Ovem Forceps , Overhead (Radiant Heat) Warmer ,1, Pre-Warm Mode Control, Manual Mode Control And Baby Mode Controlled By Micro-Computer;,2, Set Temperature And Baby Temperature Can Be Displayed Separately; , 3, Horizon Angle Of Heater Head And Inclination Of The Bassinet Can Be Adjusted; 4, The Panels Around Bassinet Can Be Turned Outward;5, X-Ray Cassette Under The Bassinet; 6, Apgar Timer; 7, Failure Alarm Indication; 8, Rs232 Connector; 9, Vertical Height Adjustment Stand And Baby Scale Is Optional. , Oxygen Cylinder Key , Oxygen Hood Child , Oxygen Inhelation (Oxygen Ip-Medical Oxygen In Steel Or Aluminium Cylinder ( 10 Ltr Water Cap ) With Gas Specific Pin System ( 2 Cylinder ) , Oxygen Mask Adult , Oxygen Mask Neonatal , Oxygen Mask Padeatric , Pap Smear Stain , Paper Point Absorbent F1- , Paper Points 15-40,45-80 , Para Check-Vivex (Rapid Test) , Para Film Tap. Roll , Parallelogram Condenser ( Pf-151) , Paste Carries Asst. , Pateint Drap [Disposable] , Pco2 Membrane Caps,3/Pkg:Ccx , Pead. Stethoscope , Pec Hemostatic Patch For Post Renal Dialysis Size 5 Cmx7cm , Pediatric Resuscitation Kit (Silicon Autoclave Ambu Bag 250Ml. -1Pcs.,Silicon Autoclave Ambu Bag 500Ml. - 1Pcs, Mack 0 No. 1Pcs, Mask 1 No.1Pcs, Laryngoscope With Blade 0, 1-1 Pcs,Et Tube 2.5 No. - 4Pcs, , Percie Typhe Forcpes , Performance Check Solution , Periosteum Electro (2.5Cm, 3 Cm, 3.5Cm, 4Cm, 5Cm) , Peso Reamers Asst. , Pf Instrument( Pf-21) , Ph (Na) Conditioning Solution 50 Ml Bottle , Phaco Drap (For Operation) , Phaco Drape , Phaco Emulsification Machine , Phenol Crystal 400Gm , Phenolic Compound , Pink Gowns For Staff (Cotton) , Pit Fissure Sealant , Plane Forceps With Plateform , Plaster Cutter Large , Plaster Cutter Small , Plaster Knife , Plaster Spatula , Plaster Spatula Curve , Plaster Spatula Straight , Plastic Cement Carrier , Plastic Cement Mixing Spatula , Plastic Condensor , Plastic Instrument , Plastic Spatula , Platelet Dilution Fluid , Pleural/Asetic Analysis Kit , Pluggers Asst. , Po2 Membrane Caps,6/Pkg:Ccx , Polycarboxylate Cement , Portable Fully Automatic Blood Analyzer For Blood Gas Electrolyte,Chemisteries, Coagulation Hematology, Cardiac Markers 1. Analyzer Should Be True Point Of Care Patient Bedside Ing System. (Compact And Handy).2. It Should Have Features : A) It Should Be Battery Operated (2X9 V Lithium Batteries).B) It Should Have Large Dot Matrix Super Twist Liquid Crystal Display.C) It Should Have Soft Keyboard.D) It Should Have The Capacity To Read The Separate And Combined Package .E) Infrared Light – Emitting Diode To Transmitrecords.F) It Should Have 5000 S Record Storage Capacity.G) It Should Wide Operating Temperature 16 To 30 Degree C For Cartridge Ing (Built In Thermal Control).H) It Should Have Built In Barometric Pressure Sensor.I) It Should Have Built In Calibrator.J) It Should Have Electronic Simulatork) It Should Have Portable Printerl) Lithium Batteries For Ing Should Be (Disposable)M) It Should Have Printer Paper3. Upgradation Should Be Once In 6 Month.4. It Should Be Usfda Certified.5. Analyzer Should Comprise Of Bio-Chemical & Silicon Ship Technology With A Results Of Laboratory Accuracy And Precision In 2 Minutes.6. User Safety Should Be In Most Protected.7. Cartridges Are Disposable.8. Providing 25 Cartridges With The Machine.9. It Should Include 1 Years Warranty. It Should Have Least Maintenance.10. It Should Have The Facility Of Detecting The Operational 7Quality Error.11. It Should Have Rapid Results – Lab Accurate Results At The Bedside In As Little As 2 Minutes.12. It Should Able To Accept Sample Of Venous And Arterial, Capillary Samples For Cardiac Markers And Neonates .13. It Should Have Broad Range Of Assays – One Handheld Platform For Ing Blood Gases, Electrolytes, Chemistries, Coagulation, Cardiac Markers, Including Bnp.14. It Should Be Easy To Use – Simple, One-Hand Operation, Self-Contained Cartridges, Integrated Barcode Scanning Eliminates Manual Data Entry.15. It Should Have Open Data Connectivity – Seamless Integration With Lishis And Poc Data Management System, Including Data Management Solutions From Other Vendors.16. It Should Have Quality Controls For All Cartridges, It Should Be Have External Electronic Device To Check The Functioning Of The Analyzer.. 17. It Should Have The Facility Of Bar Code Scanning For Patient Id , User Id And Also Consumable Lot. 18 It Should Be Used At Any Time And Telephone Helpline Should Be Available 24X7. , Post And Core Materials , Postmartum Gloves , Postmartum Set , Postmortem Table, 187Cm X75cm X 75Cm , Potassium Nitrate Hypersensitivity Paste , Potassium Permegnate Crystal 0.5% (Molecular Wt 158.04 Potency 99%, Merck) , Ppe Kit (For Swin Flu) , Ppiucd Tray , Pregnancyrapid Test Card , Probe Cleaner(M53) 50 Ml , Professional Hemoglobin Ing System (Point Of Care) San-Hgb1. It Should Be A Compact Portable Hemoglobin Ing System.2. It Should Be Consists Of Compact, 3Volt Lithium Battery-Operated Meter.3. It Should Be Single Usestrips-Used In Measuring Total Hemoglobin From Capillary Or Venous Whole Blood.3. It Should Be Single Usestrips-Used In Measuring Total Hemoglobin From Capillary Or Venous Whole Blood.4. It Should Be Clia- Waived&Ce Marked5. It Should Be Cost Effective Results That Clinicians Require.6. It Should Be Self Calibrating.7. It Should Have 250 Memory Data Storage.8. It Should Have Large Easy To Read Lcd Screen.9. It Should Be Accurate And Precise.10. It Should Require Small Blood Sample Size(Approximately15ul) , Prolene Mesh 7.5 X 15 Cm(12 Foils /Pkt) , Prostheter Instruments Set(A) Impression Tray Plastic For Detulation Mount - 1 Set(B) Metal Impression Tray For Edentulis Mouth - 1 Set© Algianale Impression Material(D) Zink Oxide Engenil Impression Peste(E) Russel Bowl - 2 Nos(F) Plaster Spatula - 2 Nos(G)Lacron Calvess - 2 No(H) Wax Knife - 2 Nos(I) Wax Spatula- 2 Nos(J) Bile Planar- 1 Nos (K) Wax Sheets- 2 Boxes (L) Dental Stone Plaster - 10 Kg (M) Autoclave - 1 Nos , Prothrombin Time Kit , Prothrombin Time Test Kit , Pt Kit , Pt, Ptt Coagulometer , Ptt Kit , Pulp Devitlizer , Pump Tubing Kit Abg Pump Ccx , Quadriceps Exrciser , R.B.C. Diluting Fluid , Ra Test Kit , Rc Preparation , Rct Kit , Reamers 15-40,45-80 , Refraction Unit , Regular Toothpaste , Retinoscope Streak , Rh Viewing Box , Rheumatoid Factor Rapid Test , Richard Screw (Lag Screw) (50Mm, 55Mm, 60Mm, 65Mm, 70Mm, 75Mm, 80Mm, 85Mm, 90Mm, 95Mm, 100Mm, 110Mm) , Robber Boul , Room Coolerroom Cooler 18 Exahust Fan Crompton Motor Galvenised Matel Sheet Body Window Hight Stand In Angeled Iron , Room Thermometer , Root Canal Treatment Instrument (A) H- Files No 15-40(B) H -Files No 45-80(C) K Files No 15-40(D) K Files No 45-80(E) G P Points No 15-80(F) Rc Finger Spreader No 15-80(G) Sprit Lamp(H) Root Canal Sealer - Endomethasone(I)Temparary Cement-M D Temp , Round Condenser ( Pf-153) , Rprkit 100 , Rubber Polishing Cups , Rvg Disposable Cover , Ryles Tube Size 7 To 10 No. , S. Protine Kit , S. Triglyceride Kit , Sas-Mx,Acidhemoglobin,10 Kit , Sas-Mx,Alkaline-Hb,10 Kit , Sas-Mx,Alkalin-Phosphate,10 Kit , Sas-Mx,Hdl Cholestrol,10 Kit , Sas-Mx,Immuno Fixation,10 Kit , Sas-Mx,Lypo Protein,10 Kit , Sas-Mx,Serum Protein,10 Kit , Sas-Mx,Urine Protein,10 Kit , Scalp Vain Set 20 No , Scalp Vain Set 22 No , Scalp Vain Set 24 No , Schanzs Pin (2Mm, 3Mm, 4.5Mm, 6.5Mm) , Schintz Tonometer , Scissores Bandage Cutting Ss/Metal Long Size , Scissors Dressing Ss St/Curvedno 5 , Scissors Dressing Ss St/Curvedno 6 , Scissors Dressing Ss St/Curvedno 7 , Scissors Dressing Ss St/Curvedno 8 , Scissors Dressing Straight Or Curved, Sharp Or Blunt, S.S. 12.5Cm. , Scissors Dressing Straight Or Curved, Sharp Or Blunt, S.S. 15Cm. , Scissors Dressing Straight Or Curved, Sharp Or Blunt, S.S. 20Cm. , Scissors Mayos , Straight Or Curved, S.S. 13.5Cm , Scissors Mayos , Straight Or Curved, S.S. 16Cm , Scissors Stitch Cuttings.S. , Section O Files Asst. , Semen Analysis Kit , Semen Analysis Stain , Seprating Discs Dental , Serum Albumin Kit , Serum Bilirubin Kit , Serum Cholestrolkit , Serum Creatinine Kit , Serum Electrolyte Kit , Serum Protien Kit , Serum Urea Kit , Set Of Tibial Implant , Sevlon 7.5% 500Ml. Bottle , Sgot Kit , Sgpt Kit , Shoulder Wheel , Sickleknife , Sics Blade (1. Crisent Knife, 2. Kiretome Blade 3.2, 3. Sideport Blade) , Side Port Blade , Side Port Blade , Sikh Jhadu , Silica Gel : Crystal (Suleb Company) , Silver Alloy , Sinskys Hook (Dialer) , Sinus Operation Instrument Set , Sinus Surgery Set , Skin Smearfor Afp , Sky Blue Gowns For Doctors (Cotton) , Slide Box Plastic For 50Slide , Slit Lamp , Sodium Citrate 500 Grms , Sodium Citrate Powder 500 Gm , Sodium Hypo Chloride Solution 5 Lt , Sodium Hypocholoride1x500ml , Sodium Potassium Kit , Solid Glass Rod Big 24 , Spill Management Kit , Spinal Needle 23 No , Spirit Lamp 30Ml Stainless Steel , Spirit Lamp 60Ml Stainless Steel , Spreaders Asst. , Sputum Afb Kit , Sputum Collection Container , Stein Manns Pin (9 X 4.5Mm, 12 X 4.5Mm) , Sterilant Hot Disinfectant For Dialysis Containing 21% (Approx) Citric Acid, Malic Acid, Lactic Acid(5 Ltr Can) , Sterile Urine Container , Stop Watch 1/100 Sec.With Ringer/Time , Store Burs , Stromatolyser-4Dl For 5-Part Hematology Analyser (Model : Sysmex Xs-800I (Japan))(Pack Size 5000 Ml) , Stromatolyser-4Ds For 5-Part Hematology Analyser (Model : Sysmex Xs-800I (Japan))(Pack Size 126 Ml), , Suction Catheter All Size , Suction Drain 16 No , Suction Drain 8 No , Suction Machine Foot Operated , Suction Tip , Sulfolyser For 5-Part Hematology Analyser (Model : Sysmex Xs-800I (Japan))(Pack Size 5000 Ml), , Sulphuric Acid 500Ml 20% , Sulphuric Acid H2s04 Molecular Wt. 98.09 Minimum Assay 98% Colour Clear , Sulphuric Acid N/50 , Super Files Asst. , Superier Racts Forceps , Superior Rectus Forcep , Surface And Fogging Disinfectant Stabilised H202,10-11%W/V With Diluted Silver Nitrate Sol. 0.01%W/V(5 Litre Can),Each , Sutur Needle Size 11 To 20 No. , Sutur No - 10-0 & 8-0 , Synthetic Absorbable Suture 1 , Synthetic Absorbable Suture 2 , Sysmex Cell Clean 50Ml , Sysmex Cellpack Reagent 20 L. , Sysmex Stromatolyser-Wh 500Ml , T Pocha Big , T3 Test Kit , T3t4t5 Mini Vidas 125 , T4 Test Kit , Tc Bur Straight Hp.(Ff016) , Temporaray Cavit , Temprory Filling Material , Temprory Luiting Cement , Tenotomy Scissors , Test Tube 3 Cap (K3 Edta) Plastic , Test Tube 3 Cap (Plain) Plastic , Test Tube 75X12mm , Test Tube Holder , Test Tube Washing Brush , Test Tube With Cap. , Test Tube With Rack (Small & Medium Size) , Thb Calibrator Co-Ox Module , Thyroid Test Kit Elisa , Tibia Inter-Locking Nail Set , Tibial Condyler Plate Rt & Lt (6 Hole, 8 Hole, 10 Hole) , Tips For Auto Pipatte Blue , Tips For Auto Pipatte Yellow , Tongue Depressor With Light Sourceand Ble Disposablades, , Tonometer , Torchrapid Test Card , Torch Test Kit Elisa , Trachcostomy Tube Of All Size , Traction Unit Cervical , Traction Unit Lumber , Trans Electric Nerve Stimulation Machine , Treadmill Stress Test System :- 1.The Treadmill Stress Test System Complete Acquisition Of Resting And Stress Ecg, Treadmill Unit With Interface With Alll The Protocols And Provision Of Printing The Resting Well As Stress Ecg And Analyzing The Same. 2.Interfaced To Hospital Information System/Lan/Wlan2.3Fda/Ce Approved And Analyze 12/15 Simultaneous Ecg Leads. 3.Have Facility For Display Of All 12/15 Leads Real Time Rhythm Ecg On Screen. 4. Have Facility Of On Line Storage Of Patient Ecg Data. Storage Of At Least 500 Patients On Hdd In Addition The Storage On Floppy Drive Or Cd Should Be Possible. 5. Updated Medians With Elimination Of Artifact Ectopy And Aberrancy In All Leads 3.5Filters With Facility To Eliminate Artifact Due To Respiration Muscle/Noise Ac Interference Baseline Wandering Without Compromising / Distortion In St Segment Changes. 6. Have Facility To Do The Reanalysis Of Stored Ecg Report With Reanalysis Of The Current Stress Report By Changing The Measurement Point I.E. E J And Post J Points. 7.The Monitor Displayauto Comparison Of Resting Versus Current Lead Of Maximum St Depression Separately With Color Coded Protocol, Stage, Clocks For Elapsed Time, Total Time Target Hr, Treadmill Speed & Grade, Pvc Counts/Minute, Warning Messages Lead Check Torso. 8. The System Have User Defined Report Generation In Different Formats Including The St/Hr Loops And St/Hr Index Up To 15 Leads Formate For Close Diagnosis. 9. Have Facility For 12 Lead Resting Electrocardiogram With Full Interpretation 3.10Have Provision Of Software Driven User Programmble Exercise Protocols Standard Protocols Facility Should Be Available For Choice For Both Staged And Ramp Protocols. 10. System Print Comprehensive Final Report On A Minute By Minute Record Of St Segment Chages St Segment Trend Plot And Acceleration Of St Segment 3.12Display Have Facility To Amplify A Normal Gain Along With A Sample Of Resting Ecg Complex For Close Test. 11. System Have Dynamic Scan Facility To Display Automatically The Worst Ecg Lead. 12.Signal Acquistion From Patient And Analysis. 13. Automatic Arrhythmia Detection And Documentation. 14.Facility For Display Of Processed Ecg Vectors After Signal Averaging Allowing View Of Artifact Free Ecg Complexes. 15.Beat To Beat Online Storage And Event Review. 16. System Is Able To Provide The Real Time Printing By Uto Or Manual Mode In Desired Formats Writer Resolution Should Be Themal 1000Line.Sc X 200 Dpi For Printing. 17. Automatic Noise Free Programmable Treadmill Fda/Ce Approaved/Certified. 18. Integrated With His/Lan/Wlan. 19. Able To Transfer Data Through Modern Card. 20. The Treadmill Always Start From O Mph And Load Capacity Of 450 Lbs. And Speed Range Of 0-13.5Mph And Elevation 0-25% And Should Have Facility To Run The Self-Calibration Programme. Treadmill Having Minimum 60 Walking Surface. 21.Treadmill Has Two Stop Modes With Digital Microprocessor Control, Including One Patient Activated Stop Mode The Same Can Be Interfaced To The Main Analysis System. 22. System Configuration Accessories, Spares And Consumablesa. Stress Test System - 01, B. Treadmill - 01, C. Interface Cable - 01, D. Printer - 01, E. Patient Cable - 01, F. Body Wear - 01, G. Paper - 1000 A4 Sheets, H. Standard Accessories Required For Running The System, I. Resettable Overcurrent Breaker Fitted For Protection, Ii. Servo Controlled Stabilizer?Cvt6.4 Ups Of Suitable Rating Conforming To Is-302 For Ecg/Computer System Iii. User And Service Manual In English Iv. Log Book With Instruction For Daily, Weekly Monthly And Quarterly Maintenance Checklist. , Trial Case , Trial Frame - Adult , Trial Frame - Child , Triway Cannula (3 Way Stop Cock) , Trolley For Oxygen Cylinder (Small) Ss , Trolley For Oxygen Cylinder For Jamboo (Big) Ss , Trypan Blue , Tsh Test Kit , Tube Size 3 , Tube Size 4 , Tube Size 5 , Tube Stand 24 Hole , Tube Stand 48 Hole , Tulle Grass Paraffin Gauze Dressng Sterile Leno Weave With Soft Paraffin Base Size 15Cm X2 Mtr , Turbinectomy Scissor , Turnicate Belt , Typhoid Test Card , Ultra Sonic Machine , Ultra Sound Sonography Machine - Dw-C8 Color Dopplerultrasonic Diagnostic System Gathers Digital Color Doppler Imaging Technology, Speckle Reduction Technology, Multi-Beam Parallel Imaging Technology, And Effective File Management System, Versatile Professional Software.Deluxe Appearance With Ergonomic Touch Screen, Dw-C8 Brings Unexpected Scanning Experience For Doctors. Application: Abdomen, Ob&Gyn, Cardiology, Vascular And Small Parts, Urology, Musculoskeletal, Pediatrics And Etc. Displaying Mode: B?2B?4B?Left&Right B|M?B|D?Pw?M?B Mode Part Zoom;B|C|D?B|C|M?B|C ,Duplex?Pw?Cfm?Cpa Image Processing: Thi, Speckle-Reduction, Color Coder, Frame Averaging, Micro- Angle Adjustment, Wall Filter, 256 Grey Scale, Scanning Angle/Width Control, Composit Processing Of Tissue And Blood Flow Image.Measurement & Report Packages: Gyn(Four Edition For Ga Calculation), Cardiac, Vascular, Urology, Andriatrics, Peripheral Vascular, Multiple Births, Orthopedic Surgery And Etc. Input/Output Interface: Vga, Network, 4 Usb, 3 Probe Interface, Dvd-Rom, Sony Print With Usb Port. Standard Configuration:- Main Unit, 3.5Mhz Convex Probe : 2.12.53.13.55.0, 15 Lcd, 3 Probe Connectors, Hard Disk (500G), 4 Usb Port Dicom 3.0, Dvd-Rw Color Doppler Package. Options:- 3.3Mhz Micro-Convex Probe : 2.12.53.13.34.5 7.0Mhz Trans-Vaginal Probe : 5.06.37.09.0 10.0 7.8Mhz Linear Probe : 5.06.06.37.89.0 Video Printer Laser Printer Color Doppler Package , Ultrasonic Cleaner , Unlock Syringe 26 Gauge , Urine Bag , Urine Multi Strip , Urine Pot Male , Urine Pregnancy Test Card , Urine Strip Sugar+ Protien 1X100 , Uv Chamber For Dental Clinic , Vaccunater Edta All Types , Vanna Scisson , Vdrl Rotater , Vdrl Shaker , Vdrl Strip , Vdrl Test Card , Veginal Spekulam Forceps , Ventilator ( Paediatric) 1 Recommended Application-Neonatal, Infant And Paediatric Patients 2.Flow-2-25 Litre Per Minute .3.Tidal Volume-6 To 300 Ml 4.Modes Of Operation-Ac, Simv/Imv, Cpap With Backup Ventilation And Standby 5.Inspiratory Time-0. 2 To 3. 0 Seconds 6. I : E Ratio1:1 To 1 : 10 (Ac ) 1:1 To 1 : 60 ( Simv ); Inverse 1:1 To 4 : 1 ,7.Frequency-1 To 150 Breaths Per Minute 8.Triggering-Flow Triggering (1-10 Lpm ) & Pressure Triggering -(0.5 - 8 Cmh2o ) 9.Expiratory Pressure-0 To 20 Cmh2o 10.Inspiratory Pressure Limit-5 To 50 Cmh2o 11.Alarms-High / Low Inspiratory Pressure, Loss Of Inlet Gas, Apnea & Electrical Power Failure 12.Alarm Mute-30 Seconds 13. Safety Pressure Relief-15 To 50 Cmh2o 14.Display-5. 7 Inches Graphical Lcd , Ventilator (Adult) - Main Technical Specification - Gas Source: O2 For Medical Use:280Kpa-600Kpa N2o For Medical Use:280Kpa-600Kpa Adjusting Range For Mixture Gas: O2: 30 %~ 100 % N2o: 70%~ 0% Alarm And Protection System: Alarm For Power Failure Alarm And Protection System For Gas Supply High/Low O2 Concentration Alarm And Protection System Power: Supply Voltage:~220 V±22 V Power Frequency:50 Hz±1 Hz Input Power:60 Va. Features : 1.Apply To Adults And Children 2.High Intelligent Control System 3.Multiple Modes Of Ventilation 4.Double Trigger Function: Ipap And Flow 5.Compliance Compensation Function 6.Colorful Lcd Display Screen. , Vertical Mesurment Tape , Vicrylno. 1(1X12 Foil) , Vision Drum , Vision Drum Wall Mounted , Wadges Wooden/Plastic , Wall Clock , Wall Mounted Thermometer , Water Bath , Wax Bath , Wax Knife , Wbc Dilution Fluid , Western Green Pippetes , Wheel Chair Non Folding Overall Approx Size 67Cm(W)X 112Cm (D) 92Cm (H) Ms Tubelar Framwork Fitted With Metel Seat & Back Adjustable Alluminium Foot Rests Two Solid Rubber Tyred Bicycle Wheel With Brack And Self Propelling Ss Hoops Two Swivel Castor 200 Mm Dia Infront Preatreated & Powder Coated , Widal Rapid Test Card (Typhoid) , Widal Test Kit(Typhoid ) , Wiper Full Size , Wire Cuter , X Ray Casettedigital10x 12 For Fuzi Make Machine 150 Sheet , X Ray Casettedigital11x 14 For Fuzi Make Machine 150 Sheet , X Ray Casettedigital14x 17 For Fuzi Make Machine 100 Sheet , X Ray Casettedigital8x 10 For Fuzi Make Machine 150 Sheet , X-Ray Casette 10X12 , X-Ray Casette 12X15 , X-Ray Casette 8X10 , X-Ray Chest Stand Floor Mounted , X-Ray Chest Stand Wall Mounted , X-Ray Developer 22.5Ltr , X-Ray Developer 9Ltr , X-Ray Developing Tank 22.5Ltr , X-Ray Developing Tank 9Ltr , X-Ray Film 10X12 Packet Of 50 Sheet , X-Ray Film 12X12 Packet Of 50 Sheet , X-Ray Film 12X15 Packet Of 50 Sheet , X-Ray Film 6.5X8.5 Packet Of 50 Sheet , X-Ray Film 8X10 Packet Of 50 Sheet , X-Ray Film Digital 10X12 Packet Of 150 Sheet , X-Ray Film Digital 11X14 Packet Of 150 Sheet , X-Ray Film Digital 14X17 Packet Of 150 Sheet , X-Ray Film Digital 8X10 Packet Of 150 Sheet , X-Ray Fixer13.5 Ltr , X-Ray Fixer13.5 Ltrtank , X-Ray Fixer 22.5Ltr , X-Ray Hanger S.S. 10X12 , X-Ray Hanger S.S. 12X15 , X-Ray Hanger S.S. 8X10 , X-Ray Lead Appron , X-Ray Lead Gloves , X-Ray Lead Letter 0-9 , X-Ray Lead Partition With Lead Glass , X-Ray View Box Med. Two Tubelight , Size 24X24 , X-Ray View Box Med. Two Tubelight , Size 36X24 , Yag Laser , Zinc Phosphate Cement Liquid , Zinc Phosphate Cement Powder , Zink Oxide Powder , Tab Hydroxylurea 500 Mg , Tab Rifampicin 150 Mg , Tab Rifampicin 600Mg , Tab Rifampicin 300 Mg , Tissue Paper Roll , Cotton Bundle 100Gm , Zipper Bag 10 Inch , Sodium Hypochloride 4 % , Thermacol Box , Lithium Heparin Tube 5 Ml , Cotton Bundle 250 Gm , Tab Clofazimine
Contract Date: Jan 15, 2025 Contract Value : ₹ 5.00 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Madhya Pradesh View Result →
50.
Coal and Mines #6673618 AOC
Bids Are Invited For Lapel Mic Lapel Mic Common Parameters =================== 1 Frequency Range: 60 Hz- 18Khz 2 Signal-To-Noise Ratio: >90Db 3 Thd: 1% 4 Max. Spl: >120Db 5 Temperature Range:0-50 C Receiver Specification ============================ 1 Sensitivity : 3 Micro Volt At 52 Db(A)Rms Sn 2 Frequency Response: 50Hz-18Khz 3 Power Supply: 10-24Vdc 4 Squelch: Tone Code Plus Amplitude 5 Diversity: True Antenna Transmitter ================= 1 Rf Output Power: >6Mw 2 Frequency Range: 60 Hz- 18Khz 3 Audio Input: 3.5 Mm Jack Socket 4 Power Supply: 2 Aa Size Batteries 5 Microphone Type: Dynamic 6 Pick-Up Pattern: Cardioid 7 Adjustment Range Of Transmitter Sensitivity: 0 To - 30 Db, Adjustable In 10-Db Steps 8 Antenna: Internal 9 Transducer Principle: Condenser, Pre-Polarized 10 Display : Channel, Frequency, Mute, Battery Level Accessories ================== All The Essential Accessories Required To Complete The System Shall Be Provided By The Bidder. Price Inclusive Of Packing, Transportation And Delivery Up To Nalco Refinery Premises. Category Not Available On Gem For The Text String Uploaded By The Buyer Relevant Lapel Pin Total Quantity : 6
Contract Date: Ref. Documents Contract Value : ₹ 1.40 Lakh
Government Departments No of Bidders 4
Odisha View Result →
TenderDetail
Loading tenders