View Bid Results For Audio Conference Tenders

We found 1271 Bid Results related to audio conference tenders. You can find Contractor details who won audio conference tenders along with contract details in Bid awards announcements section.

Indian Tenders
31
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
2
Live Opportunities Worldwide
Filters
Stage
1088
106
77
Tender Publishing Platform
572
699
State / UT
36
200
178
141
81
73
69
49
47
45
41
36
31
31
28
28
25
22
20
20
18
13
13
13
8
7
7
5
4
4
3
3
2
2
2
1
1
Contract Value
225
338
572
134
Publish Date
5
0
0
0
0
Sector
30
356
177
139
111
57
39
38
37
35
33
26
25
20
20
19
18
17
16
14
13
12
9
8
7
6
5
4
4
3
2
Ownership
7
779
219
134
131
4
2
1
Within keyword
Active filters:
Showing 1–26 of 1271 tenders matching your filters
West Bengal View Result →
Telangana View Result →
3.
Educational and Research Institute #11459888 Technical Bid
Tender for Establishment Of Ict-Enabled Audio-Visual Modernization Of Classrooms At Iiita , Establishment Of Ict-Enabled Audio-Visual Modernization Of Classrooms At Iiit-Allahabad , 86 Inch Interactive Flat With Ops , 65 Display Unit (Duplicate) (Professional Signage Grade) , Ptz Camera , Wireless Collar And Handheld Microphone Variable Frequency , Wall Mount Speaker - 60 Watt , Amplifier-250 Watt , Digital Signal Processor , Customized Powder Coated Lockable Storage Podium , Intel I7 Or Ryzen 7 7700 Above 16 Gb Ddr4 For Ops Interactive Panel , Wireless Keyboard & Mouse Combo , Hdmi Splitter 4K Support , Hdmi Cable 20M , Cable & Connectors(Approx) , Conference System Host (Controller) , Chairman Gooseneck Unit , Delegate Gooseneck Units , Installation / Testing/ Commissioning
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
Delhi View Result →
5.
Drinking Water Supply and Sanitation #11440764 Technical Bid
It Component And Other Works Of Truck Terminal At Panjapur; 1 SECTION 1.00 ELECTRICAL PANAL 2 MV panel - 1 Incomer-630A4PMCCBOutgoing-200ATPNMCCB-2 Nos,160 A TPN MCCB-1 Nos, 100 A TPN MCCB-2 Nos,40A TPN MCCB -3 Nos, ALUMINUM BUS, POWDER COATED ENCLOSER, R,Y, B INDICATION, MFM, (MCCB-L&T & ABB, Accessories – Reputed Make) 3 MV panel - 2 Incomer-630A4PMCCBOutgoing-400ATPNMCCB-1 Nos,160A TPN MCCB-3 Nos,,100A TPN MCCB-2 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER , R,Y,B INDICATION, MFM, (MCCB-L&T & ABB, Accessories –Reputed Make) 4 ACCP-1,6STAGEAPFCPANEL75KVAR,ALUMINUM BUS, POWDER COATED REPUTED BRAND (MCCB, MCB,POWER CONTACTOR - L&T & ABB, Capacitor and APFC relay–Reputed Make) 5 Commercial block –GROUND FLOOR Incomer: 200A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 24nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-4nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 6 Commercial block -1ST FLOOR Incomer: 125A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 10nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-6nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 7 UTILITYPANELCommercialblockIncomer:160A4P MCCB -1 nos Outgoing:100A TPN MCCB-2 Nos, 40A TPN MCB -2 Nos, 40A DP MCB -1 Nos, ALUMINUM BUS,POWDERCOATEDENCLOSER(MCCB&,MCB- L&T & ABB, Accessories – Reputed Make) 8 UTILITY PANEL – DORMITORY BLOCK Incomer: 400A 4 PMCCB-1nosOutgoing:160ATPNMCCB-4Nos,100A TPNMCCB-5Nos,63ATPNMCCB-3Nos,ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 9 EXTERNALLIGHTINGPANEL-1Incomer:160ATPN MCCB -1 nos Outgoing:63A TPN MCB-5 Nos,32A DP MCB -3 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 10 EXTERNALLIGHTINGPANEL-2Incomer:160ATPN MCCB-1nosOutgoing:63ATPNMCB-3Nos,32ADP MCB-2Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 11 SUB LT PANEL DORMITORY BLOCK Incomer: 160A 4P MCCB -1 nos Outgoing:40A TPN MCB-5 Nos,40A DP MCB -5 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 12 LIFTPANELIncomer:100ATPNMCCB-1nos Outgoing:100A TPN MCCB-1 Nos,6A SP MCB -3 Nos,16A SPMCB-3Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 13 HV METRING PANEL 630A 11KV OUTDOOR TYPE VCB SP PANEL WITH CT, PT FOR MEASUREMENT AND PROTECTION 14 11KV VCB 3 phase PANEL LINE UP OUTDOOR 1 INCOME, 2 OUTGOING 15 LTISOLATOR630A4PISOLATORPANELOUTDOOR TYPE 16 Supply, errection, testing and commissioning of 11 KV, 25 KA,630A,HTOutdoorThreePanelRingMainGear complete 17 Supply, errection, testing and commissioning of Fire FightingElectricalControlPanelof15HP,415V,50Hz RatingWallMountedTypefabricatedusingCRCAsheet, hinged lockable door, dust and vermin proof with following provisions:Supply, errection, testing and commissioning of Fire Fighting ElectricalControlPanelof15HP,415V,50HzRating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R, Y, B Phase Indication Lamp, Volt Meter (0 - 500 V), Ammeter (0 - 50 A), Volt Meter Selector Switch- 1 set c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set d. Single Phase Preventer - 1 No. e. Indication Lamp for Motor ON / OFF / TRIP - 1 set f. AUTO / MANUAL Selector Switch, ON / OFF Push Button - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover The above panel mounted on wall using anchor fasteners 18 SECTION 2.00 EARTHEN ROD 19 5 Mtr depth for each earth pit which includes 40mm dia GI Pipe,25X5mmCopperStrips,andcopperearthplateof size 125mm x 50mm x 6mm 20 SECTION 3.00 PUDDLE FLANGE 21 Supply, delivery and fixing following puddle flange including cost of materials and following charges etc. complete. As directed by the departmental officers. 22 50NB x 600mm Pipe L one side Flange & Plate GI 23 65NB x 600mm Pipe L one side Flange & Plate GI 24 80NB x 600mm Pipe L one side Flange & Plate GI 25 100NB x 600mm Pipe L one side Flange & Plate GI 26 200NB x 600mm Pipe L one side Flange & Plate GI 27 80NB x 600mm Pipe L one side Flange, One side thread & Plate GI 28 100NB x 600mm Pipe L one side Flange, One side thread & Plate GI 29 150NB x 600mm Pipe L one side Flange, One side thread & Plate GI 30 300NB x 600mm Pipe L one side Flange, One side thread & Plate GI 31 SECTION 4.00 LANDSCAPING 32 SUPPLY AND FIXING THE MEXICAN CARPET / KORIEN LAWN : New Soil preparation like root regulators, vermin, DAP compost, pest control, weeds control, water irrigation and laid with Mexican carpet lawn. 33 PlantingofDurantanewgoldPlantornamentalfoliage shrub variety of height 30-45cm in polythene bagof size 6x7inchincludingloadingandunloadingcharges, transportation,stackingofsaplingsatsite,earthwork excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 34 supply and fixing ofDuranda Gold (Large) including All charge etc compleded 35 Supplying and Planting of Hibiscus tilliaceus tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the deparment incharge 36 supply and fixing of Exora including transport including all charge etc 37 supply and fixing of Bycuss Tree Plantincluding transport including all charge etc 38 supply and fixing of Royal Parms including transport including all charge etc 39 supply and fixing of Aricka Parms including transport including all charge etc 40 supply and fixing of Mosanda including transport including all charge etc 41 Planting of Asparagus myuri ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch includingloadingandunloadingcharges,transportation, stacking ofsaplings atsite, earthwork excavationof required size,planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 42 supply and fixing of Adineeyam including transport charge etc complete 43 supply and fixing of Gulmahar Tree Plant including transport charge etc complete 44 PlantingofTecomacapensisfoliageshrubvarietyof height 30-45 cm in polythene bag of size 6x7 inch including loadingandunloadingcharges,transportation,stackingof saplingsatsite,earthworkexcavationofrequiredsize, plantingofsapling,refillingofexcavatedearthetcas directed by the site in-charge. 45 PlantingofCycusrevoluta21-30 Leavesornamental foliageSpecimenplantvarietyofheight105-120cmin polythenebagofsize16x16inchincludingloadingand unloadingcharges,transportation,stackingofsaplingsat site,earthworkexcavationofrequiredsize,plantingof sapling, refilling of excavated earth etcasdirectedby the site incharge. 46 supply and fixing of Neem Cake including transport charge etc complete 47 Supply of Vermicompost in powder form, devoid of impuritiesandothermaterials,nutrientdenseandwhich supports plant growth including cost of transportation 48 FOUNTAINSUPPLYANDFIXINGFOUNTAINBOTTOM WITH BASE AS PER DESIGN INCLUDING ALL LABOUR AND MATERIAL ETC. 49 SECTION : 5 IT COMPANANT 50 INDOOR & OUTDOOR SURVEILLANCE 51 Supplyandfixingof5.0MPIPOutdoorCamerawith necessary fitting including labour cost,etc complete 52 Supply and fixing of 4.0MP IP PTZ CAMERA with necessary fitting including labour cost,etc complete 53 Supply and fixing of ANPR CAMERA with necessary fitting including labour cost,etc complete.Similar to dahua technologyITC431- RWIF-IRLS 4 mp outdoor network link line plate bullet Camera. 54 Supply and fixing of NVR 32 CH with necessary fitting including labour cost,etc complete 55 Supply and fixing of NVR 8CHwith necessary fitting including labour cost,etc complete 56 Supply and fixing of 8TB HARD DISK complete 57 Supply and fixing 8 PORT POE SWITCH complete 58 Supply and fixing 24 PORT POE SWITCH complete 59 Supply and fixing CAT6 ARMOURD CABLE complete 60 Supply and fixing OFC CABLE 12CORE Armourd complete 61 Supply and fixing OFC CABLE 6 CORE Armourd complete 62 Supply and fixing Outdoor Rack complete 63 Supply and fixing of 3 Core 4 Sqmm Armourd Cable complete 64 Supply delivery and erection for following Networking Accessories, DB, Rack indoor , LIU, Media Converter, SFP, Pigtail, Cable Manager, Connectors etc , complete as direected by the departmental officer 65 Network Accessories 66 16 Port Gigabit Unmanaged Network Switch with 2 SFP (Including Module & Pigtail) 67 Fiber Patch Panel 12 Port 68 LC/LC Single Mode / Multi mode Patch Cord 2mtr 69 Pigtails Single Mode / multi mode Cord LC type for Fiber Patch Panel 70 CAT 6A UTP Armoured Cable 71 CAT 6A UTP 2 mtr Patch Cord 72 CAT 6A Modular 24 Port Patch Panel fully loaded 73 Fiber Single Mode Cables 12 Core Armoured 74 Supply delivery and erection for following NETWORK VIDEO RECORDER FOR CCTV HIGHER END etc , complete as direected by the departmental officer 75 4 Channel - 1 SATA 76 8 Channel - 1 SATA (1 No. Hard Disk) 77 16 Channel - 2 SATA (2 Nos. Hard Disk) 78 32 Channel - 2 SATA (2 Nos. Hard Disk) 79 Supply delivery and erection for following LAN NETWORK SWITCHES - HIGHER ENDFully Managed 10 / 100 / 1000 Layer-3 with 10G Uplink - Higher End 80 24 Port 81 24 Port with Fibre Port 82 48 Port 83 Supply delivery and erection for following MEDIA CONVERTER FOR OPTICAL FIBRE CABLE HIGHER END complete as direected by the departmental officer 84 Single Mode 85 Multi Mode 86 Supply delivery and erection for following I/O SOCKET - HIGHER END complete as direected by the departmental officer 87 RJ-45 88 RJ-11 89 CAT 6 PVC Module Box 90 Face Plate Single Socket RJ-45 91 Face Plate Dual Socket RJ-45 92 Face Plate Quad Socket RJ-45 93 Supply delivery and erection for following HARD DISK FOR NVR - HIGHER END complete as direected by the departmental officer 94 2 TB 95 4 TB 96 6 TB 97 8 TB 98 Supply delivery and erection for following RACK WITH ACCESSORIES - HIGHER END complete as direected by the departmental officer 99 2U Rack 100 4U Rack 101 6U Rack 102 9U Rack 103 12U Rack 104 36U Rack 105 42U Rack 106 Fan extra for the above rack 107 Supply delivery and erection for following Cable Management Box with Cover complete as direected by the departmental officer 108 CABLE MANAGEMENT SYSTEM 109 50mm x 80mm Cable box with cover 110 150mm x 105mm Cable box with cover 111 b. Divider 112 c. Cover Joint 113 d. End Cap 114 e. Joint for Top Part 115 f. Joint for Bottom Part 116 Supply and fixing of Pole 6 Mtrs with footing includng cost of excavation.Pcc,etc complete 117 Supply and fixing of Pole 8 Mtrs with footing includng cost of excavation.Pcc,etc complete 118 Supply and fixing of 15KVA Online UPSnecessary fitting including labour cost,etc complete 119 SupplyandFixingofIPSANwithHDDforSecodary Recording 1 day 120 SupplyandFixingofVMS-IncludingEnterance&Exit ANPR, Surveillance, Parking availability, Parking Mangement, Duration and Payment Calculation 121 Supply and Fixing of VMS Server including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 122 Supply and Fixing of VMS Workstation for Operation including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 123 INTERACTIVE TOUCH PROFESIONAL DISPLAY, ACTIVE LED VIDEO WALL AND VIDEO CONFERENCING SYSTEM 124 65”, 4K, Andriod-13, INTERACTIVE TOUCH Professional Display with USB-C, HDMI-In & Out. 125 Professional 4K, All-In-One VC Camera bar, extension TABLE MIC, AI face tracking and auto zooming 126 4K, 12x Optical,5x Digital, Total 60x Zoom, Professional PTZ VC Camera:-Built-In Microphone Array, Speaker Tracking. 127 Full HD, 20x Optical, Professional PTZ VC Camera. 128 Outdoor Active LED Video wall with Pixel Pitch of 4mm, MS Cabinets, Receiving Cards and Control Processor. 129 Supply and Fixing of following UHF WIRELESS CONFERENCE MIKE SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 130 UHF Wireless WAP access point ( Supports both Audio system and Camera system ) 131 Supply and Fixing of following OUTDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 132 Supply and fixing of IP Speaker Outdoor 133 Supply and fixing IP Server , Broad Cast 134 Supply and fixing IP Phone 135 Supply and Fixing of following OUTDOOR PARKING SOLUTION including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 136 Supply and fixing of AI Camera for Parking Availability 137 Supply and fixing of LED Display for Vehicle Availability 138 Supply and fixing of 55 4K UHD for Parking availability with connecting Cable 139 Supply and fixing of Work Station at Security Room 140 Supply and Fixing of following INDOOR SURVEILLANCE including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 141 Supply and fixing of CAT6 INDOOR CABLE including labour cost 142 Supply and fixing of 25.4mm pipe for cable laying including labour cost 143 Supplyandfixingof 3Core4SqmmArmourdCable includinglabour cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 144 Supply and Fixing of following IINDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 145 Supply and fixing of 15W Speaker Indoor 146 Supply and fixing of 120W Mixer Amplifier 147 Supply and fixing of240W Power Amplifier 148 Supply and fixing ofCordless Mic UHF 149 Supply and fixing of2 Core 1.5 Sqmm with neatly finishing 150 Supply and fixing of 25.4mm pipe for cable laying including labour cost 151 Supply and Fixing of followingAnalog to IP Module including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 152 Indoor system 153 Outdoor system 154 INDOOR CONTROL ROOM 155 Supplyandinstallationof2TonA/CwithSteblizer& Accessoriesincludingmaterialconveyance,labour complete as per engineer incharge 156 GST amount as applicable (18 %)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
Telangana View Result →
Jharkhand View Result →
8.
Educational and Research Institute #11408306 AOC
Bids Are invited for Providing and fixing 22.8 mm thick panels with bottom metal screen, intermediate fabric screens, and top screen in fabric magnetic finish, complete in all respects. Providing and placing NOVA make or equivalent free-standing pedestal with flat metal front of size 390 mm (W) × 435 mm (D) × 646 mm (H), comprising one drawer (1 box + 1 file) with central locking system, complete with all fittings and accessories. Providing and fixing Keyboard Platform Tray (KBPT) with integrated mouse tray, suitable for the workstation, complete in all respects. The complete workstation system shall be Greenguard (UL) certified and BIFMA LEVEL 2 certified. The manufacturer shall possess valid certifications of ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA, as applicable.The work includes transportation, loading, unloading, fixing, alignment, leveling, testing and commissioning, complete, as per approved drawings, specifications and directions of the Engineer-in-Charge , Supplying and placing in position executive main table with ERU and integrated pedestal of overall size 2350 × 2350 × 750 mm (H), comprising primary and secondary work surfaces made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998, finished with 0.4 mm thick PVC membrane pressed on top, complete with soft-closing access flap and in-built power box for cable management. The modesty panel shall be of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998, finished with 0.4 mm thick PVC membrane pressed on top.The under-structure and integrated pedestal shall be made of 25 mm thick pre-laminated twin board of E1-P2 grade, conforming to IS:12823-1990, of approved shade, with all exposed edges edge-banded with matching 2 mm thick PVC lipping. The pedestal shall be of BOX-BOX-FILE configuration, having powder-coated metal panel drawer slides of 400 mm length with 325 mm drawer extension, provided with soft-closing and anti-slam mechanism, suitable handles, and central locking system, complete in all respects. The product shall be GREENGUARD (UL) certified, Indoor Advantage GOLD and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications. The item includes transportation, loading, unloading, fixing, alignment and making functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position back unit of overall size 2350 × 500 × 1800 mm (H), complete in all respects, having top panel made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823-1990, with all exposed edges edge-banded with matching 2 mm thick PVC lipping, sliding door storage unit with body panels including sides, bottom, back and shelves made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick matching PVC edge banding, shutters made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, provided with soft-closing and anti-slam mechanism, suitable handles and locking arrangement, display/storage unit made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick PVC lipping for sides, back and shelves, doors made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, and top panel of display unit also made of 25 mm thick MDF finished similarly, the complete unit being GREENGUARD (UL), Indoor Advantage GOLD and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position high back executive chair, complete in all respects, having cushioned seat made of injection-moulded plastic outer and inner, inner upholstered in pure leather with moulded High Resilience (HR) polyurethane foam of density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf at 25% compression, cushioned back made of PU foam with in-situ moulded M.S. E.R.W. round tube of size 1.9 ± 0.03 cm dia × 0.16 ± 0.0128 cm thick, upholstered in pure leather, seat size 47.6 cm (W) × 49.2 cm (D) and back size 47.5 cm (W) × 77.0 cm (H), PU moulded armrest tops upholstered in pure leather mounted on drop-lift adjustable M.S. E.R.W tubular arm supports of size 3.81 ± 0.03 cm × 0.2 ± 0.01 cm thick with chrome-plated finish, height adjustable up to 6.5 ± 0.5 cm in five steps, provided with active bio-synchro mechanism having 360° revolving, front-pivot tilt with continuous lumbar support, tilt tension adjustment operable in seating position, five-position tilt limiter and seat/back tilting ratio of 1:2, mechanism housing made of HPDC aluminium black powder-coated, provided with seat depth adjustment through integrated sliding mechanism with adjustment range of 6.0 ± 0.5 cm, adjustable back support through up/down mechanism housed in plastic T-spine with adjustment range of 7.42 ± 0.5 cm, pneumatic height adjustment with stroke of 10.0 ± 0.3 cm, pedestal made of high-pressure die-cast polished aluminium fitted with five twin-wheel castors of injection-moulded black polypropylene, pedestal pitch-centre dia 65.0 ± 0.5 cm (75.0 ± 1.0 cm with castors), overall seat height 44.5 to 54.5 cm, overall height 114.0 to 131.5 cm and overall width and depth 76.1 cm each, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position visitor chair, complete in all respects, having cushioned seat made of injection-moulded plastic outer and inner, inner upholstered in pure leather with moulded High Resilience (HR) polyurethane foam of density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf at 25% compression, cushioned back made of PU foam with in-situ moulded M.S. E.R.W. round tube of size 1.9 ± 0.03 cm dia × 0.16 ± 0.0128 cm thick, upholstered in pure leather, seat size 47.6 cm (W) × 49.2 cm (D) and back size 46.5 cm (W) × 59.5 cm (H), provided with cantilever type tubular frame made of SS-202 tube of size Ø 2.54 ± 0.03 cm × 0.02 ± 0.016 cm thick, back connected to frame through chrome-plated high-pressure die-cast connector, overall seat height 46.2 cm, overall height 98.2 cm, overall width 60.9 cm and depth 64.7 cm, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Supplying and placing in position main table of overall size 1800 × 900 × 750 mm (H), complete in all respects, having work surface made of a combination of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, and 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823-1990, with all exposed edges edge-banded with matching 2 mm thick PVC lipping, provided with soft-closing access flap and in-built power box on work surface for wire management, modesty panel made of 25 mm thick MDF, one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, under-structure made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick matching PVC lipping, integrated pedestal made of 25 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823-1990 with 2 mm thick PVC edge banding, drawer fronts made of 25 mm thick MDF one side pre-laminated board conforming to IS:14587-1998 finished with 0.4 mm thick PVC membrane pressed on top, pedestal of BOX-BOX-FILE configuration using powder-coated metal panel drawer slides of 400 mm length with 325 mm drawer extension, provided with soft-closing and anti-slam mechanism, suitable handles and locking arrangement for security, the product being GREENGUARD (UL) certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position mid back chair, complete in all respects, having seat made of 1.5 ± 0.1 cm thick hot-pressed plywood upholstered with fabric upholstery covers and moulded polyurethane foam, with extra thick foam at the front edge for comfort to the popliteal area, back made of injection-moulded glass-filled polypropylene upholstered with mesh fabric and provided with adjustable lumbar support made of injection-moulded polypropylene with adjustment range of 5.0 ± 0.1 cm, seat size 53.5 cm (W) × 51.0 cm (D) and mesh back size 51.0 cm (W) × 70.0 cm (H), seat foam of High Resilience (HR) polyurethane moulded with density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 at 25% compression, provided with adjustable armrests having up-down adjustment in six steps (7.2 ± 0.5 cm range) with armrest top PU-moulded over glass-filled nylon insert and mounted on armrest structure made of glass-filled nylon, provided with centre tilt synchro mechanism with multi-lock having 360° revolving, three-position locking with anti-shock mechanism and tilt tension adjustment, pneumatic height adjustment with stroke of 9.5 ± 0.3 cm, pedestal assembly made of injection-moulded glass-filled nylon fitted with five twin-wheel castors, pedestal pitch-centre diameter 66.1 ± 0.5 cm (76.1 ± 1.0 cm with castors), twin-wheel castors injection-moulded in black nylon, overall width 76.1 cm, depth 76.1 cm, height 101.5 to 111.0 cm and seat height 44.5 to 54.0 cm, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position visitor chair, complete in all respects, having single shell seat and back made of 1.2 ± 0.1 cm thick hot-pressed plywood, upholstered with moulded polyurethane foam on top and backing foam on rear side, finished with knitted fabric or leatherette upholstery, with extra thick foam at the front edge for comfort to the popliteal area, High Resilience (HR) polyurethane foam for seat and back moulded with density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 at 25% compression, provided with cantilever type visitor tubular frame made of M.S. E.R.W. tube of size Ø 2.54 ± 0.03 cm × 0.2 ± 0.016 cm thickness, powder coated finish of DFT 40–60 micron, armrest tops moulded from polyurethane (PU) with metal insert and mounted on tubular frame, overall width 60.5 cm, depth 65.0 cm, height 86.5 cm and seat height 46.0 cm, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position ergonomic task chair, complete in all respects, having cushioned seat assembly with seat base moulded in glass-filled poly-amide, moulded polyurethane foam upholstered with high-stretch knitted polyester fabric, back injection-moulded in glass-filled polypropylene upholstered with mesh fabric and provided with adjustable lumbar support made of injection-moulded polypropylene with adjustment range of 3.0 ± 0.1 cm, mesh back size 45.5 cm (W) × 54.0 cm (H) and seat size 48.5 cm (W) × 49.0 cm (D), High Resilience (HR) polyurethane foam used in seat and back cushions moulded with minimum density 48 kg/m³ and hardness load 15 ± 2 kgf as per IS:7888 at 25% compression, seat and back firmly connected to base frame and cantilevered to allow multi-dimensional movement with impact cushioning and synchronized seat-back motion during posture changes, back-spine structure comprising “S” shaped spines and spine connector moulded in high-strength glass-filled poly-amide, provided with variable tilt angle recline adjustable through three-position tilt limit feature inbuilt in seat base with user-weight dependent return force, armrest assembly consisting of armrest housing sliding over armrest structure both moulded in glass-filled poly-amide, with button-operated height adjustment of 6.6 ± 0.5 cm, armrest top of integral skin PU moulded over plastic inner moulded in glass-filled poly-amide, pneumatic gas-lift height adjustment with stroke of 9.2 ± 0.3 cm, pedestal made of injection-moulded glass-filled poly-amide having pitch-centre diameter 66.0 ± 0.5 cm (76.0 ± 1.0 cm with castors), fitted with five twin-wheel castors injection-moulded in poly-amide of 5.0 ± 0.1 cm wheel diameter, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position high back chair, complete in all respects, having cushioned seat assembly with seat base moulded in glass-filled poly-amide, moulded polyurethane foam upholstered with high-stretch knitted polyester fabric, cushioned back assembly with back inner moulded in polypropylene, in-situ moulded with polyurethane foam and upholstered with high-stretch knitted polyester fabric, seat size 48.5 cm (W) × 47.0 cm (D) and back size 45.5 cm (W) × 53.0 cm (H), High Resilience (HR) polyurethane foam used in seat and back cushions moulded with minimum density 48 kg/m³ and hardness load 15 ± 2 kgf as per IS:7888 at 25% compression, seat and back firmly connected to base frame and cantilevered to provide multi-dimensional movement, impact cushioning while sitting and synchronized seat-back movement during posture changes, back-spine structure comprising “S” shaped spines and spine connector moulded in high-strength glass-filled poly-amide, provided with variable tilt angle recline adjustable through three-position tilt limit feature inbuilt in seat base with user-weight dependent return force, adjustable armrests comprising armrest housing sliding over armrest structure both moulded in glass-filled poly-amide with button-operated height adjustment of 6.6 ± 0.5 cm, armrest top of integral skin PU moulded over plastic inner moulded in glass-filled poly-amide, pneumatic gas-lift height adjustment with stroke of 9.2 ± 0.3 cm, pedestal assembly made of injection-moulded glass-filled poly-amide having pitch-centre diameter 66.0 ± 0.5 cm (76.0 ± 1.0 cm with castors), fitted with five twin-wheel castors injection-moulded in poly-amide of 5.0 ± 0.1 cm wheel diameter, overall seat height 44.5 to 53.8 cm, overall height 99.5 to 108.8 cm and overall width and depth 76.0 cm each, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading and placing in position, complete as per specifications and directions of the Engineer-in-Charge. , Supplying and placing in position 24-seater conference table (MINGLE MODULAR PLT), complete in all respects, having worksurface made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, with all exposed edges edge-banded with 2 mm thick matching PVC lipping, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, aluminium alloy 63400-WP profiles used for connecting panels together with knock-down construction, provided with plastic ABS access flap for easy access to wires and cables, worktop available in various modular shapes, modesty panel made of 18 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823:1990, edge-banded with 2 mm thick PVC lipping, powder-coated accent metal strip below work surface made of 0.8 mm CRCA as per IS:513, epoxy polyester powder coated (DFT 40–60 microns), wire management panels made of 0.8 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40–60 microns), provision to mount Anchor Roma 6 module plate below worktop, and cutouts on top with two-piece injection-moulded plastic component for pulling audio/video cables and connecting devices to power sockets below worktop, the product being GREENGUARD (UL), Indoor Advantage GOLD, GRIHA, SVAGRIHA and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position 16-seater conference table (MINGLE MODULAR PLT), complete in all respects, having worksurface made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, with all exposed edges edge-banded with 2 mm thick matching PVC lipping, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, aluminium alloy 63400-WP profiles used for connecting panels together with knock-down construction, provided with plastic ABS access flap for easy access to wires and cables, worktop available in various modular shapes, modesty panel made of 18 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, powder-coated accent metal strip below work surface made of 0.8 mm CRCA as per IS:513, epoxy polyester powder coated (DFT 40–60 microns), wire management panels made of 0.8 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40–60 microns), provision to mount Anchor Roma 6 module plate below worktop, and cutouts on top with two-piece injection-moulded plastic component for pulling audio/video cables and connecting devices to power sockets below worktop, the product being GREENGUARD (UL), Indoor Advantage GOLD, GRIHA, SVAGRIHA and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge , Supplying and placing in position 12-seater conference table (MINGLE MODULAR PLT), complete in all respects, having worksurface made of 25 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, with all exposed edges edge-banded with 2 mm thick matching PVC lipping, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, aluminium alloy 63400-WP profiles used for connecting panels together with knock-down construction, provided with plastic ABS access flap for easy access to wires and cables, worktop available in various modular shapes, modesty panel made of 18 mm thick pre-laminated twin board of E1-P2 grade conforming to IS:12823:1990, edge-banded with 2 mm thick matching PVC lipping, powder-coated accent metal strip below work surface made of 0.8 mm CRCA as per IS:513, epoxy polyester powder coated (DFT 40–60 microns), wire management panels made of 0.8 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40–60 microns), provision to mount Anchor Roma 6 module plate below worktop, and cutouts on top with two-piece injection-moulded plastic component for pulling audio/video cables and connecting devices to power sockets below worktop, the product being GREENGUARD (UL), Indoor Advantage GOLD, GRIHA, SVAGRIHA and GREENPRO certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supply and fixing wooden storage unit of size 1200 × 450 × 1219 mm (H), complete in all respects, comprising low to medium height HDU, with body made of 18 mm pre-laminated board (PLB) with all edges sealed with 0.8 mm thick PVC edgeband, back panel made of 9 mm white pre-laminated board (PLT), complete ready-to-assemble construction using suitable knock-down (KD) fittings, shelves and separator panels (where provided) made of 18 mm white PLT with 0.8 mm edge banding, bottom shelf fixed and other shelves with one-step adjustable positions for optimized storage, door panels made of 18 mm PLB with 2 mm edge banding on all edges, fitted with flush plastic handle vertically at center, doors mounted on suitable hinges with HDU fitted with adjustable height fittings, three-point locking arrangement provided, and all units fitted with 6 mm levelers at the bottom for proper leveling, the product being GREENGUARD (UL) and BIFMA LEVEL-2 certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position one-seater sofa, complete in all respects, having seat foam made of PU foam with density 28 ± 2 kg/m³ and an additional top layer of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, back foam made of PU foam with density 28 ± 2 kg/m³ and two additional top layers of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, understructure made of 1.2 ± 0.1 cm thick hot-pressed plywood (moisture-resistant and termite-proof as per IS:303) and pinewood cross-sections free from major knots and surface defects, zigzag spring assembly comprising 6 nos. per seat with 3.8 mm dia mounted over understructure for cushioning, leg assembly welded in stainless steel (grade SS 202) tube and plate with plastic end caps, overall dimensions width 86.0 cm, depth 90.5 cm, height 85.5 cm, seat height 45.0 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position two-seater sofa, complete in all respects, having seat foam made of PU foam with density 28 ± 2 kg/m³ and an additional top layer of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, back foam made of PU foam with density 28 ± 2 kg/m³ and two additional top layers of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, understructure made of 1.2 ± 0.1 cm thick hot-pressed plywood (moisture-resistant and termite-proof as per IS:303) and pinewood cross-sections free from major knots and surface defects, zigzag spring assembly comprising 6 nos. per seat with 3.8 mm dia mounted over understructure for cushioning, leg assembly welded in stainless steel (grade SS 202) tube and plate with plastic end caps, overall dimensions width 172.0 cm, depth 90.5 cm, height 85.5 cm, seat height 45.0 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position three-seater sofa, complete in all respects, having seat foam made of PU foam with density 28 ± 2 kg/m³ and an additional top layer of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, back foam made of PU foam with density 28 ± 2 kg/m³ and two additional top layers of supersoft PU foam with density 32 ± 2 kg/m³, upholstered in fabric or leatherette, understructure made of 1.2 ± 0.1 cm thick hot-pressed plywood (moisture-resistant and termite-proof as per IS:303) and pinewood cross-sections free from major knots and surface defects, zigzag spring assembly comprising 6 nos. per seat with 3.8 mm dia mounted over understructure for cushioning, leg assembly welded in stainless steel (grade SS 202) tube and plate with plastic end caps, overall dimensions width 206.0 cm, depth 90.5 cm, height 85.5 cm, seat height 45.0 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position three-seater sofa, complete in all respects, overall dimensions width 176.5 cm, depth 81.5 cm, height 83.5 cm, upholstered in PVC material of 1 mm thickness in coffee brown shade, frame made of pine wood with moisture content 10–12%, plywood used in frame 12 mm and 18 mm thick, seat cushion made of slab stock foam with density 32 kg/m³, back and armrest cushions filled with conjugated hollow fiber (recron), webbing made of nylon, legs made of PVC, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing, supplying and placing in position coffee table, complete in all respects, overall size 1202 × 594 × 411 mm (W × D × H), body made of 18 mm pre-laminated particle board (PLB) with all exposed edges edge-banded with 2 mm thick PVC, middle horizontal panel providing storage area, four nylon bushes provided, top comprising 8 mm thick toughened glass glued with UV plate and PLT panel, glass fixed to side vertical panels, PLT top panel hinged to side vertical panels to open upwards, knock-down construction, finish in WENGE shade with suede finish on PLT panels and Sunray finish on UV-glued plates under glass, hardware comprising dowels for knock-down assembly with high-quality standard hardware including screws, door hinges, bumpers, expanding sockets, nylon bushes, etc., including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position coffee table, complete in all respects, overall size 1100 × 600 × 456 mm (L × W × H), table-top made of 8 mm thick toughened clear glass, body made of 18 mm thick pre-laminated board (PLT) in Cincinnati Walnut finish, configuration comprising shelf storage and display space, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position corner table, complete in all respects, overall size 450 × 450 × 606 mm (L × W × H), table-top made of 6 mm thick toughened clear glass, body made of 18 mm thick pre-laminated board (PLT) in Cincinnati Walnut finish, configuration comprising shelf storage and display space, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position corner table, complete in all respects, overall dimensions 60 × 45 × 60 cm (W × H × D), made of 18 mm thick pre-laminated particle board (PLB) with 10 mm thick toughened glass top, construction knock-down type, finish comprising MIP lamination in Black Ink shade with matching matt PVC lipping and digitally printed glass matching the PLB finish, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Supplying and placing in position main table of overall size 1220 × 600 × 750 mm (L × W × H), complete in all respects, work surface made of 25 mm thick pre-laminated board of E1-P2 grade of approved shade conforming to IS:12823:1990, all exposed edges edge-banded with 2 mm thick PVC lipping, access flap provided on work surface for wire management, understructure made of 18 mm thick pre-laminated twin board of E1-P2 grade of approved shade conforming to IS:12823:1990, edge-banded with 2 mm thick PVC lipping, cube legs fabricated from MS ERW tube 50 × 25 × 1.2 mm and 40 × 40 × 1.2 mm as per IS:7138, top of legs welded with 3 mm thick HR steel support brackets (IS:2062) for fixing worktop, welded structure coated with 50 micron epoxy polyester, base fitted with plastic cap with M8 molded insert and straight M8 leveler adjustable up to 50 mm, cross members made from 50 × 25 × 1.2 mm ERW tube (IS:7138), coated with 50 micron epoxy polyester, assembled by friction-fit PDC joinery and grub screws, two cross members per table, power box made of 0.8 mm thick CRCA (IS:513) with 8-module Anchor Roma cutout fixed along the depth of worktop, soft-closing access flap made of aluminum extrusion with PDC parts in aluminum alloy and plastic parts in Nylon 6, wire brush with nylon bristles for cable management, the product being GREENGUARD (UL) certified, with manufacturer holding valid ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. , Providing and placing in position high-back (HB) chair, complete in all respects, with cushioned seat made of injection-molded plastic outer and inner, inner upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45 ± 2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression; cushioned back made of PU foam with in-situ molded MS ERW round tube 1.9 ± 0.03 cm × 0.16 ± 0.0128 cm, upholstered with leatherette, seat size 47.0 × 48.0 cm (W × D), high-back size 47.7 × 76.4 cm (W × H); armrest top moulded in PU, mounted on drop-lift adjustable tubular support of 3.81 ± 0.03 cm × 0.2 ± 0.01 cm MS ERW tube with chrome finish, height adjustable up to 6.5 ± 0.5 cm in 5 steps; active bio-synchro mechanism with 360° revolving type, front-pivot tilt with feet resting on ground, continuous lumbar support, tilt tension adjustable in seating position, 5-position tilt limiter, seat/back tilting ratio 1:2, mechanism housing of HPDC aluminium black powder coated, seat depth adjustable 6.0 ± 0.5 cm, adjustable back support connected to Up/Down mechanism housed in plastic T-spine adjustable 7.42 ± 0.5 cm, pneumatic height adjustment stroke 10.0 ± 0.3 cm, pedestal of high-pressure die-cast polished aluminium fitted with 5 twin-wheel castors, pedestal pitch-center diameter 65.0 ± 0.5 cm (75.0 ± 1.0 cm with castors), twin-wheel castors injection-moulded black PP, wheel diameter 6.0 ± 0.1 cm, overall chair dimensions: seat height 43.1–53.1 cm, height 112.7–130.2 cm, width & depth 76.1 × 76.1 cm, including transportation, loading, unloading, fixing, alignment and making the unit fully functional, certified Greenguard (UL) and BIFMA LEVEL 2, manufacturer holding ISO 9001, ISO 45001, ISO 50001, IGBC, GRIHA and AIOTA certifications, complete as per approved drawings, specifications and directions of the Engineer-in-Charge. Total Quantity : 172
Contract Date: Ref. Documents Contract Value : ₹ 42.59 Lakh
Government Departments No of Bidders 5
Delhi View Result →
9.
Banking and Finance #11408185 AOC
Bids Are Invited For 1 Ifp 98’’Inch, 4K (3840 X 2160P) Resolution, 8Gb / 128Gb, Brightness – 450 Nits, Hdmi In X 3, Vga In X 1, Spdif X 1, Hdmi Out X 1, Usb Type-C X 1, Usb 2.0 X 1, Usb 3.0 X 4, Usb Type B X 2, Audio In X 1, Audio Out X 1, Hdmi Out X 1, Wi-Fi, Bluetooth, Rj45(Lan) (In & Out), Rs232, All The Ports Available Without Converter And Extender, Life ->50,000 Hours, Response Time - 8Ms, Aspect Ratio – 16:9, Duty Cycle – 24 X 7 Hours, Android 14.0 Or Higher With Following Functions:- Air Class , Google Play Store, Picture-In-Picture (Pip), File Manager Should Have Feature To Direct Share File/Folder Through Qr Code. Mirroring Function Through Laptop & Smartphone With Byod Feature Up To 9 Devices Simultaneously With Vc Equipment Recalling Feature To Laptop, Auto Handwriting Recognition, Adaptive Table, Multiple Windows To Use Different Application Simultaneously On Same Screen Up To 4 With Split Screen, Search With Whiteboard Writing In The Browser, Drag Your Preferred Search Results From The Browser To Whiteboard, Android Whiteboard Can Import .Pdf,.Image,.Ppt,.Xls,.Doc,.Mov Format Directly, Multilevel Detection Of Object For Writing Small Pen Tip, Large Pen Tip, Finger And Palm. Qr Code & E-Mail Facility From Whiteboard, Polling Function, Sticky Note Function. Ability To Manage & Maintain All Deployed Ifps Connected Over Lan/Wan, Including The Functionality Of 1. Turn On/Off The Panel, 2. Change Input/ Volume, 3. Broadcast Message To The Panel, 4. Remote Monitoring Of The Panel Desktop. 5. Get Powerful Insights And Analytics 6. Remote Screen Control. 1. Interactive Software Solution Should Have Interactive Tools For Subjects Like Mathematics, Geometry, Music, Geography For Lesson Preparation And Teaching. 2. Compatible With All Browser Like Android, Windows, Mac, Ios, Etc. 3. Can Access The Software Straight From Web Browser Without Installing Any Application 4. Upto 1Gb Free Cloud Storage To Store Teaching Material.. Ops From Same Oem With Intel® Core Tm I7 11 Gen, 512Gb Ssd , Graphics- Integrated Intel® Hd Graphics, Memory- 16 Gb Ram , Sound – Integrated High Definition Audio Stereo ,Wifi 802.11Ac (2.4Ghz/5Ghz), Networkingintegrated 10/100/1000M Adaptor, Usb 3.1 X 2 Gen2(10Gbps), Usb 3.1 (Type C) (Gen1) X 1, Usb 3.0 X 1, Usb 2.0 X 1, Audio Out X 1 Microphone Input X 1, Bluetooth, Hdmi 2.0,4K@60Hz Output X 1,Lan Rj45 (10/100/1000M) X 1, Com (Rs232) Port X 1 And Sim Card Slotx1 4G. All Software’S And Features Must Be From Same Oem And Product Datasheet Should Be Available On Oem Website. , Oem Maf Required. 1 2 Integrated Usb All-In-One Video Conferencing Device. Camera: Camera Should Be Plug And Play And Should Comply To Uvc 1.1 Standards For Processing Of Video. Output : Yuy2,Mjpeg.Optical Resolution:(4K(3840×2160)30Fps , 1080P60Fps, 720P30Fps & 60Fps).Sensor Size : 1/2.5 Cmos, Port : Usb 3.0 For End Device Connectivity. Port : Usb 3.0 For End Device Connectivity. Snr >= 38Db,Aperature : F2.0 ~ 3.1,Focal Length Wide: 3.725Mm, Tele : 17.88Mm,Should Support Autofocus. Smooth Motorized Pan, Tilt And Zoom From Remote Control ,It Should Also Be Possible For User To Control Camera Via Simple Software Application In Pc & Mac.Should Support Fecc : Far End Camera Control. Zoom: 15X Or Better,Camera Control: Standard Visca / Mini Din 6 Pin Or Equivalent. Minimum Illumination : 80 Lux,Preset : 3 Or Above ,Should Have Kensington Security Slot To Ensure Physical Security Of Camera In Conference Room. Camera Should Have Option To Mount On Tripod Stand If Required. To Be Supplied With Required Power Adaptor, Regional Plugs, Cables Minimum 3Mts And Mounting Bracket & Kit. Microphone: System Should Have 2 Microphone And Can Support With Additional 5 Microphone, With Splitter And Microphone Expansion Cable, Pickup Range: 15 Ft / 4.5M Diameter Or More ,Each Microphone Should Have Four Omnidirectional Microphones Forming Eight Acoustic Beams, Should Have Aec (Acoustic Echo Cancellation),Should Have Vad (Voice Activity Detector) To Cut Unwanted Voice. Should Have Background Noise Suppression, Should Have Mute Button With Led Status Indicator, Frequency Response: 90Hz – 16Khz,Sensitivity: >-27Db +/-1Db @ 1Pa,It Should Be Possible To Extend Single Or Multiple Microphones Up To 50Mtrs.Microphone Data Rate: 48 Khz. Speaker: System Should Be Supplied With 2 Speakerphone From Day One, Speaker Should Take Power From The Integrated Unit Only To Avoid Multiple Cables Or Power Sources. Should Have High-Performance 3 (76Mm) Driver. Speaker Should Be Supply With Mounting Kit, Speaker Volume 95Db Spl @1W, 100Db Spl @7.5W, Both +/-2Db At ½ Meter, Sensitivity: 95+/-2Db Spl At ½ Meter, Distortion: 200Hz–300Hz < 2.5%, 300Hz–10Khz < 1%@7.5W,Speaker Sampling Rate: 48 Khz. Other: System Should Have The Option To Connect 2 Display Devices In The Room.System Should Give The Option To Connect Any Video Source Via Hdmi / Vga On The Table Side And Carry It To The Display Device Up To 50Mts Cable Management And Ambience: System Should Be Supplied With 3Mts Of Minimum Length Cable To Connected End Device (Laptop, Mac, Codec, Desktop And Thin Client),All Necessary Cables For All The Components , Power Adaptors , Regional Plugs, Quick Start Guide Along With The Mounting Bracket Should Be Supplied By The Oem. Remote Control: Type : Rf / Bluetooth With Removable / Replaceable Batteries To Ensure It DonT Require Line Of Sight In Conference Room.System Should Be Supplied With All-In-One Remote Control To Manage Camera ( Pan, Tilt, Zoom, Preset, Block/ Mute Video ).Range 8.5 Mts Or More. Warranty: System Should Be Supplied With 2 Years Warranty And Can Support Up To 5 Years Warranty. Product Datasheet Should Be Available On Oem Website. , Oem Maf Required. 1 3 Expansion Microphones: Pickup Range: 15 Ft / 4.5M Diameter Or More ,Each Microphone Should Have Four Omnidirectional Microphones Forming Eight Acoustic Beams,Should Have Aec (Acoustic Echo Cancellation),Should Have Vad (Voice Activity Detector) To Cut Unwanted Voice.Should Have Background Noise Suppression,Should Have Mute Button With Led Status Indicator,Frequency Response: 90Hz – 16Khz,Sensitivity: >-27Db +/-1Db @ 1Pa,It Should Be Possible To Extend Single Or Multiple Microphones Up To 50Mtrs.Microphone Data Rate: 48 Khz. Product Datasheet Should Be Available On Oem Website. , Oem Maf Required. 2 4 Mounting Kits For Usb All-In-One Conferencing Device And Microphones 5 Switcher: High-Performance 4X2 Hdmi® Kvm Seamless Switch With A Plug-And-Play Design, Delivering Smooth Switching And Efficient Control For Dual-Screen Setups. 4 Hdmi Inputs, 2 Hdmi® Outputs - Seamless Switching Between Sources. Supports Resolutions Up To 3840×2160 @ 30Hz. Integrated Usb 3.0 Hub For Fast Peripheral Connectivity. 3.5Mm Audio Output For Hdmi® Audio Separation 1 6 Set Of Cable Usb, Hdmi & Speaker Cables 1 7 Delivery,Installation,Testing & Programming Charges Total Quantity : 8
Contract Date: Ref. Documents Contract Value : ₹ 12.01 Lakh
Government Departments No of Bidders 3
Telangana View Result →
10.
Public Administrative Department #11399590 AOC
Renovation Of Conference Hall & Audio & Video System In Zonal Commissioner Building In Serilingampally Circle-20, Slpz, Ghmc (Item No.1)
Contract Date: Ref. Documents Contract Value : ₹ 1.55 Crore
Local Bodies No of Bidders 1
Telangana View Result →
11.
Housing Urban and Rular Development #11394046 Technical Bid
Tender for Supply, Installation, Testing And Commissioning Of Audio Conference System In Meeting Hall At Metro Court-Ii, Jaipur
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Rajasthan View Result →
Telangana View Result →
13.
Drinking Water Supply and Sanitation #11386700 Technical Bid
Tender for Proposed Construction Of Interior Works, Audio Video Conferencing Works In Conference Hall And Supply/Fixing Of Furnitures Works At Sansthagat Vitt D.G. Office 7/9 Gomti Nagar Vistar, Lucknow
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
14.
Rural Development #11381786 Price Bid
Tender for Tuin Ds Fodklhkou Esa Flfkr Oh0lh0 Gkwy Gsrq Audio/Video (Av Solution) Gsrq Vko;D Midj.K Ø; Fd;S Tkus Gsrq Bz&Fufonk , Enterprise Grade Laser Projector Solution With Ceiling/Wall Mount Kit With 6000 + Lumens , 65-Inch Ultra Hd Professional Flat Panel Display With Wall Mount Kit , Smart Podium With Polycarbonate Body Including 21 Inch Touch Screen With Dual Touch Pcap + Emr (Finger & Stylus), Multimedia Controller, Mini Pc-I5, 8Gb Ram, 256 Gb Ssd And Wireless Keyboard And Mouse, Along With Microphone System Including Gooseneck Microphone Along With Required Accessories , Full Hd 1080P 60Fps Ptz Video Conferencing Camera With 20X Optical Zoom, 255 Presets, 60Degree Fov, Usb 3.0 Based Video Output With Hand Held Remote Control For Participants. , Digital Conference Delegate Unit With Table Top Gooseneck Microphone With Led Indication, Built In Speaker, Mute/Unmute Button. , Digital Conference Control Unit With Camera Control Functionality To Enable Ptz Camera For Voice Tracking Functionality. , 450-Watt Dual Channel Amplifier With Combined Output Of 900-Watt , Two Way Speaker With 8 Low Frequency And 2 High Frequency Drivers With Rated Power Of 100 Watt Wall Mount Speaker. , 15U Wall Mount Rack. , Installation And Other Required Cables And Accessories.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Uttarakhand View Result →
Telangana View Result →
16.
Coal and Mines #11360832 AOC
Bids Are invited for 86 Inch Smart Panel , Computer Set , Audio Amplifier 120W With Pc Interface , Audio Amplifier 200W With Pc Interface , Speaker 30W , Microphone , Conference System - Conference System (1+30) , Vc Camera , Digital Signage 55 Inch , Photocopier Machine , Sound Proof With Glass Wool And Accoustics Board - Sound Proof With Glass Wool And Accoustics Board (Area 800Sq.Ft) , Video Wall With Movable Platform , Ac 2 T Capacity , Water Purifier , Ups 10Kva , Nvr 8 Channel With 4Tb Storage , Monitor 32 Inch , Poe Switch 8 Port Unmanaged , Cctv Camera 5Mp Ip Bullet - Cctv Camera (5Mp Ip Bullet) , Hdmi Cable 10M , Hdmi Cable 20M , Cat6 Utp Cable - Cat6 Utp Cable(M) , Installation Of Sound System With Other Cables And Accessories Total Quantity : 1109
Contract Date: Ref. Documents Contract Value : ₹ 69.48 Lakh
Boards / Undertakings / PSU No of Bidders 2
West Bengal View Result →
17.
Housing Urban and Rular Development #11360020 AOC
Bids Are invited for Supply And Installation Of Conference System In Committee Meeting Room No 03 Lifiers - Supply, Installation, Testing And Commissioning Of 4X125w Class-D Lifier With 4 Independent Channels And Can Provide Automatic Re-Settable Over Current, Overload, Overheating, Overvoltage, Under-Voltage And Dc Protection , Speakers - Supply, Installation, Testing And Commissioning Of 20W Ceiling Speaker With Max Spl1m/1W 90Db. Frequency Response Of 100Hz-20Khz With A Dispersion Angle Of 120 Deg. The Speaker Should Have Tapings At 20W/10W (With Require Mounting Arrangement) , Speakers - Supply, Installation, Testing And Commissioning Of 20W Column Speaker With Max Spl1m/1W 94Db. Frequency Response Of 300Hz-15Khz With A Dispersion Angle Of 160 Deg. The Speaker Should Have Tapings At 20 W /10 W / 5 W / 2.5 W (With Require Mounting Arrangement) , Extension Cable - Supply, Installation, Testing And Commissioning Of Extension Cable 10 Mtrs. For Connection Of Additional Length Other Than Provided In Delegate /Chairman Unit , Microphone Cable - Supply And Fixing Of 18 Awg (24/0.20Mm) X 2 Core Atc Copper Conductor, Pe Insulated, Core Twisted In A Circular Form, Inner Sheathed With Moisture Proof Polymer, Braid Shielded (80%) With Atc Copper, Outer Jacketed With Matt Finish Rugged Flexible Pvc. , Audio Cable - Supply And Fixing Of Pvc Insulated Copper Flexible Speaker Wire Twin Frls 1100 Volts As Per Of Approved Make. , Wall Mounting Rack - Supply, Installation Testing And Commissioning Of Wall Mounting Rack, For Computer Switches Complete 12U Cabinet Wall Mounting With 6 Point 5 . Socket Power Supply Strip And Fan, Cable Manager, Tray As Per Site Requirement , Mixer - Supply, Installation, Testing And Commissioning Of 8-Channel Mixer With Low-Cost, High-Performance Lexicon Effects Mixers. 8+2 And 12+2 Channel Frame Sizes. Built-In 24 Bit Lexicon Digital Effects Processor. 32 Fx Settings , Hdmi Cord - Supply, Installation Testing And Commissioning Of High-Speed Hdmi Corrosion-Resistant Connector & Braided Cable, Supports Ethernet, 3D, 4K Video, Computers And Other Hdmi-Enabled Devices Black As Required To Complete The Job,20 Meter , Conference Controller - Providing And Fixing Of Conference Controller Ccse- Cura-In (With Recording System) , Chairman Mic - Providing And Fixing Of Delegate Unit Microphone Mic Auto Switch-Off Time 75 Seconds Approx., Speaker Max. Input 300Mw , Delegates Mic - Providing And Fixing Of Delegate Unit Microphone Mic Auto Switch-Off Time 75 Seconds Approx., Speaker Max. Input 300Mw , Scrap Return - Buy Back Of Old Conference System With Microphone, Lifier Cables And Speakers Total Quantity : 237
Contract Date: Ref. Documents Contract Value : ₹ 19.76 Lakh
Government Departments No of Bidders 4
Madhya Pradesh View Result →
18.
Housing Urban and Rular Development #11328685 AOC
Bids Are invited for Supply And Installation Of Conference System In Committee Meeting Room No 04 Lifiers - Supply, Installation, Testing And Commissioning Of 4X125w Class-D Lifier With 4 Independent Channels And Can Provide Automatic Re-Settable Over Current, Overload, Overheating, Overvoltage, Under-Voltage And Dc Protection , Speakers - Supply, Installation, Testing And Commissioning Of 20W Ceiling Speaker With Max Spl1m/1W 90Db. Frequency Response Of 100Hz-20Khz With A Dispersion Angle Of 120 Deg. The Speaker Should Have Tapings At 20W/10W (With Require Mounting Arrangement) , Speakers - Supply, Installation, Testing And Commissioning Of 20W Column Speaker With Max Spl1m/1W 94Db. Frequency Response Of 300Hz-15Khz With A Dispersion Angle Of 160 Deg. The Speaker Should Have Tapings At 20 W /10 W / 5 W / 2.5 W (With Require Mounting Arrangement) , Extension Cable - Supply, Installation, Testing And Commissioning Of Extension Cable 10 Mtrs. For Connection Of Additional Length Other Than Provided In Delegate /Chairman Unit , Microphone Cable - Supply And Fixing Of 18 Awg (24/0.20Mm) X 2 Core Atc Copper Conductor, Pe Insulated, Core Twisted In A Circular Form, Inner Sheathed With Moisture Proof Polymer, Braid Shielded (80%) With Atc Copper, Outer Jacketed With Matt Finish Rugged Flexible Pvc. , Audio Cable - Supply And Fixing Of Pvc Insulated Copper Flexible Speaker Wire Twin Frls 1100 Volts As Per Of Approved Make. , Wall Mounting Rack - Supply, Installation Testing And Commissioning Of Wall Mounting Rack, For Computer Switches Complete 12U Cabinet Wall Mounting With 6 Point 5 . Socket Power Supply Strip And Fan, Cable Manager, Tray As Per Site Requirement , Mixer - Supply, Installation, Testing And Commissioning Of 8-Channel Mixer With Low-Cost, High-Performance Lexicon Effects Mixers. 8+2 And 12+2 Channel Frame Sizes. Built-In 24 Bit Lexicon Digital Effects Processor. 32 Fx Settings , Hdmi Cord - Supply, Installation Testing And Commissioning Of High-Speed Hdmi Corrosion-Resistant Connector & Braided Cable, Supports Ethernet, 3D, 4K Video, Computers And Other Hdmi-Enabled Devices Black As Required To Complete The Job,20 Meter , Conference Controller - Providing And Fixing Of Conference Controller Ccse- Cura-In (With Recording System) , Chairman Mic - Providing And Fixing Of Delegate Unit Microphone Mic Auto Switch-Off Time 75 Seconds Approx., Speaker Max. Input 300Mw , Delegates Mic - Providing And Fixing Of Delegate Unit Microphone Mic Auto Switch-Off Time 75 Seconds Approx., Speaker Max. Input 300Mw , Scrap Return - Buy Back Of Old Conference System With Microphone, Lifier Cables And Speakers Total Quantity : 224
Contract Date: Ref. Documents Contract Value : ₹ 18.35 Lakh
Government Departments No of Bidders 4
Madhya Pradesh View Result →
19.
Housing Urban and Rular Development #11317532 AOC
Bids Are invited for Supply Installation Testing And Commissioning Of Audio Visual Equipment For Lifiers - Supply, Installation, Testing And Commissioning Of 4X125w Class-D Lifier With 4 Independent Channels And Can Provide Automatic Re-Settable Over Current, Overload, Overheating, Overvoltage, Under-Voltage And Dc Protection , Speakers - Supply, Installation, Testing And Commissioning Of 20W Ceiling Speaker With Max Spl1m/1W 90Db. Frequency Response Of 100Hz-20Khz With A Dispersion Angle Of 120 Deg. The Speaker Should Have Tapings At 20W/10W (With Require Mounting Arrangement) , Speakers - Supply, Installation, Testing And Commissioning Of 20W Column Speaker With Max Spl1m/1W 94Db. Frequency Response Of With A Dispersion Angle Of 160 Deg , Extension Cable - Supply, Installation, Testing And Commissioning Of Extension Cable 10 Mtrs. For Connection Of Additional Length Other Than Provided In Delegate /Chairman Unit , Microphone Cable - Supply And Fixing Of 18 Awg 2 Core Atc Copper Conductor, Pe Insulated, Core Twisted In A Circular Form, Inner Sheathed With Moisture Proof Polymer, Braid Shielded With Atc Copper, Outer Jacketed With Matt Finish Rugged Flexible Pvc. , Audio Cable - Supply And Fixing Of Pvc Insulated Copper Flexible Speaker Wire Twin Frls 1100 Volts As Per Is 694-1990 Of Approved Make. , Wall Mounting Rack - 12U Cabinet 590X600x600, Wall Mounting With 6 Point 5 . Socket Power Supply Strip And Fan, Cable Manager, Tray As Per Site Requirement , Mixer - Supply, Installation, Testing And Commissioning Of 8-Channel Mixer With Low-Cost, High-Performance Lexicon Effects Mixers. , Hdmi Cord - Supply, Installation Testing And Commissioning Of High-Speed Hdmi Corrosion-Resistant Connector & Braided Cable, Supports Ethernet, 3D, 4K Video, Computers And Other Hdmi-Enabled Devices Black As Required To Complete The Job,20 Meter , Conference Controller - Providing And Fixing Of Conference Controller Ccse- Cura-In (With Recording System) , Chairman Mic - Providing And Fixing Of Delegate Unit Microphone Mic Auto Switch-Off Time 75 Seconds Approx., Speaker Max. Input , Delegates Mic - Providing And Fixing Of Delegate Unit Microphone Mic Auto Switch-Off Time 75 Seconds Approx., Speaker Max. Input , Scrap Return - Buy Back Of Old Conference System With Microphone, Lifier Cables And Speakers Total Quantity : 250
Contract Date: Ref. Documents Contract Value : ₹ 23.19 Lakh
Government Departments No of Bidders 5
Madhya Pradesh View Result →
Puducherry View Result →
21.
Public Administrative Department #11315772 Technical Bid
Tender for The Work Biennial Contract For Operation Of Audio Conference System Installed In The Corporation Hall, Amc/Dmcs Conference Hall, Standing Committee & Other Committee Halls At Mho
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
22.
Housing Urban and Rular Development #11304512 Technical Bid
Tender for Construction Of New Building Of Govt. College At Sector 16 Faridabad (Pdg. Cctv Camera System, Large Touch Display Device, , Digital Podium, Lecture Recording System With Camera And Wireless Speakerphone With Audio Conference)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Haryana View Result →
Punjab View Result →
24.
Public Administrative Department #11300148 AOC
Tender For Construction Of Inspection Banglow, Guest House, Boundary Wall & Garage Near Suklai Head Works Under Extension, Renovation And Modernization Of (Erm), Sukla Irrigation Project Under Pmksy-Aibp For The Year 2021-22. , Construction Of Inspection Banglow, Guest House (Ground Floor). Earth Work : Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 12.5Mm Nominal Size Derived From Natural Sources) , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Pre Construction Anti - Termite Treatment : Diluting And Injecting Chemical Emulsion For Post-Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration , Brick Work : Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Plinth Protection : Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling And Dressing And Finishing The Top Smooth. , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow Cum Guest House (First Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Second Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , Roofing : Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 B49grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester To Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Sound Proof : Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is: 8183 Having Density 24 Kg/M3, 50 Mm Thick, Wrapped In 200G Virgin Polythene Bags Fixed To Wall With Screw, Rawel Plug & Washers And Held In Position By Criss Crossing Gi Wire Etc. Complete As Per Directions Of Engineer-In-Charge. , 8 Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Processto Give Stable Crystalline Structure With Minimumcompressive Strength 225 Kg/ Sq. Cm, Bending Strength100 Kg/Sq. Cm , Of Size 595X595 Mm, Having Perforationof Dia. 10 Mm With Minimum Perforated Area 18 % Withnon Woven Tissue On The Back Side, Having An Nrc( Noise Reduction Coefficient) Of 0.85, With 50 Mm Thickrockwool Of 48 Kg /Cum Backing , Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Fully Perforated Gypsum Plaster Board Of Size 1200 X 2400X12.5 Mm Having Approx. 15 % Perforated Area With Perforation Size And Pattern As Approved By The Engineerin-Charge And As Per Manufacturers Specification, With All 4 Side Tapered And Backed By Acoustical Tissue With Nrc Value Not Less Than 0.60 , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Inetrnal Electrification) Sub Head -I (Wiring) Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. A) Group A , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire , 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , 6 X 1.5 Sq. Mm , 6 X 4 Sq. Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 20 Mm , 25 Mm , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Be Used In Non Residential Buildings). , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3Pin 5/6 Socket Outlet , Sub Head - Ii (Mcb & Dbs ) Supplying And Fixin G Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)8 Way, Double Door , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 215 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 4 Way (4 + 12), Double Door , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Bre Aker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40/63 A Tp , Sub Head-Iii (Fan,Fittings And Fixtures) Supplying, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee Five Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc Motor) Not Less Than 32 W, Class Of Insulation B, 3 Nos Blade, 30 Cm Long Down Road, 2 Nos Of Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85 Air Delivery Minimum 215Cmm , 350 Rpm (Tolerance As Per Is:374-2019), Thd Less Than 10% Remote Or Electronic Regulator For Speed Control And All Remaining Accessories I/C Safety Pin, Nut Bolts , Washer, Temperature Rise=75 Degree C(Max. ), Insulation Resistance More Than 2Mega Ohm, Suitable For 230V, 50 Hz Ac Supply, Earthing Etc. Complete As Required. , Supplying, Installation Of Exhaust Fan Sweep Not Less Than 300 Mm In The Existing Opening, And Made Of Aluminium Die-Cast Motor Body, Front Protection Guard, Low Noise Operation, Robust Metal Body,Double Ball Bearing,Anti Dust,High Speed(Minimum 1350 Rpm) & High Air Delivery(Minimum 1000 Cmh) Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. , Supplying,Installation, Testing And Commissioning Of Surface Mounted Square/Round Shape Led Downlighter Having Suitable Housing Lumen Efficacy = 100Lm/Watt, System Lumen Output = 1200 Lm, Cri = 80, Power Factor = 0.9 Having Suitable Diffuser And Cct In Between 4000K To 6500 K (I/C Both Limits) Complete With All Accessories Etc. Directly On Ceiling/Wall Including Connection With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. , Sub Head-Iv (Service Connection) Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Above 35 Sq. Mm And Upto 95 Sq. Mm , Supplying Of One Number Xlpe Insulated And Pvc Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade With Isi Marked (Is 7098 (Part - I) / 1988 With Amendment Up To Date) Following Sizes. A) 3 ½ X 35 Sq.Mm , B) 3 ½ X 95 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 3.5 X 35 Sqmm ( 32 Mm ) , B) 3½ X 95 Sq. Mm (45Mm) , Supplying And Fixing Of Light Class G.I. Pipe Of 80 Mm Dia. (Nominal) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. , Sub-Head -V( Lighting Conductor And Earthing ) Providing And Fixing Of Lightning Conductor Finial, Made Of 25 Mm Dia 300 Mm Long, G.I. Tube, Having Single Prong At Top, With 85 Mm Dia 6 Mm Thick G.I. Base Plate Including Holes Etc. Complete As Required. , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Horizontal Run) , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Vertical Run) , Providing And Fixing Testing Joint, Made Of 20 Mm X 3 Mm Thick G.I. Strip, 125 Mm Long, With 4 Nos. Of G.I. Bolts, Nuts, Chuck Nuts And Spring Washers Etc. Complete As Required , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required , Providing And Laying G.I. Tape 32 Mm X 6 Mm From Earth Electrode Directly In Ground As Required. , Sub Head-Vii (Air Condition) Supplying, Installation, Testing And Commissioning Of Suitable Tr Capacity 5 Star Rating With Eer Not Less Than 4.3 , Split Type Inverter Air Conditioning Units Suitable For Indoor Unit To Be Fixed On The Wall Having Minimum Cooling Capacity 5400 Kcal/Hr Suitable For Single Phase Ac Supply Complete With Outdoor Unit Having Copper Condenser Coil,Suitable Clamp/Bracket For Fixing Outdoor Unit, Inter Connection With Suitable Copper Pipe Etc. Complete As Required. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supply, Installation Testing & Commissioning Of Rigid Upvc Piping Complete With Fittings, Supports As Per Specifications And Duly Insulated With 6 Mm Thick Closed Cell Nitrile Rubber Insulation. A) 25 Mm Dia ( With 6 Mm Nitrile Rubber Insulation) , Construction Of Inspection Banglow, Guest House (For Sanitary & Water Supply) Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps With Elbow Including Operated Levers , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board 510X1040 Mm Bowl Depth 250 Mm , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Semi Rigid Pipe 40 Mm Dia , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing And Fixing Toilet Paper Holder : Vitreous China , Providing And Fixing Soil, Waste And Vent Pipes : 100 Mm Dia Sand Cast Iron S&S Pipe As Per Is: 1729 , Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 100 Mm Inlet And 100 Mm Outlet Sand Cast Iron S&S As Per Is: 3989 , Cutting Chases In Brick Masonry Walls For Following Diameter Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size), Including Necessary Plaster And Pointing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) : 100 Mm Dia , Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms , Providing And Fixing Brass Bib Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Brass Stop Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 15 Mm Dia Nominal Outer Dia Pipes , 20 Mm Dia Nominal Outer Dia Pipes , 25 Mm Dia Nominal Outer Dia Pipes , 32 Mm Dia Nominal Outer Dia Pipes , 40 Mm Dia Nominal Outer Dia Pipes , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc Internal Work - Exposed On Wall 15 Mm Dia Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. Internal Work - Exposed On Wall 20 Mm Dia Nominal Bore , 32 Mm Dia Nominal Bore Metre , 40 Mm Dia Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 20 To 40 Mm Nominal Bore , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) 20 Mm Nominal Bore , 32 Mm Nominal Bore , 40 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 15 Mm Nominal Bore , 20 Mm Nominal Bore , 25 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 40 Mm Nominal Bore Horizontal , Vertical , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions : 30 Cm Length 15 Mm Nominal Bore , 20 Mm Nominal Bore , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Tube Well Boring With 100 Mm Diameter Casing Pipe For Hand Pump / Tubewell, In All Soils Except Ordinary Hard Rocks Requiring Blasting, Including Removing The Casing Pipe After The Hand Pump / Tube Well Is Lowered And Tested : Up To 6 Metres Depth , Beyond 6 M And Up To 12 M Depth , Beyond 12 M And Up To Required Depth , Providing And Placing In Position Filters Of 40 Mm Diameter G.I. Pipe With Brass Strainer Of Approved Quality. , Providing And Placing In Position Hand Pump Of Approved Quality For 40 Mm Diameter G.I. Pipe Complete With All Accessories. , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) : 50 Mm Nominal Bore , Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: 150 X 100 Mm Size P Type With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) With Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Reducing Socket, Bend, Tee, Etc. , Construction Of Septic Tank. (50 Users) Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement. , Retaining Wall Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Dismentling Existing A-Type Building Demolishing Reinforced Cement Concrete Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area Beyond 3 Sq. Metres , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles Above 25 Mm And Up To 40 Mm , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area 40 Square Centimetres And Above , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of G.S. Sheet , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Boundary Wall With Fencing). Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Columns, Pillars, Piers, Abutments, Posts And Struts , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , 20 Mm Cement Plaster Of Mix : , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. , Fencing With Reinforced Cement Concrete Post Placed At Required Distance, Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post One Side Only, Provided With Horizontal Lines And Two Diagonals Of Barbed Wire Weighing 9.38 Kg Per 100 Metres (Minimum), Between The Two Posts Fitted And Fixed With G.I. Staples On Wooden Plugs Or G.I. Binding Wire Tied To 6 Mm Bar Nibs Fixed While Casting The Post (Cost Of Reinforced Cement Concrete Posts, Struts, Earth Work And Concrete To Be Paid For Separately) :- Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used. , Land Development Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , O.H. Tank Not Found!!! , Solar Street Light Godox S60 Led Focusing Light, Outdoor & Indoor , Gate Pillarlight For Home Outdoor Garden Post Decorative Lamp , Dg Set , Audio Visual Systems Projector (Sony) , Motorised Screen And Accessories (6Ft / 8 Ft) , Digital Podium All-In-One System , Chairman Unit , Delegate Unit , Amplifier 80 Watt , Microphones , Ceiling Mount Speaker ( 6 Watt) , Wire & Lane Cabling For Speaker , Projector & Amplifier Hdmi Wire Connector Wiring Set , Installation, Testing And Commissioning Charges And Configuration Of The System , M.I. 64 -T.V. 4 Nos. @ Rs. 75000/- Per Nos. , Cctv With Motion Sensor And Sound Recorder Including Supplying & Fitting Fixing (Philips Hsp 3800) , Furniture & Fixture Sofa Set A/ Waiting Hall , B/ Executive Guest Room , C/ Suite Room , Executive Table A/ Executive Guest Room , B/ Suite Room , Executive Chair , Bed A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Matress A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Chair A/ Guest Room , B/ Staff Room , C/ Suite Room I)Type-I , Ii)Type-Ii , D/ Security Room , Bed Sheet A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Pillow A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Blanket A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Mosquito Net A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Bath Towel , Hand Towel , Kitchen Utensil A/ Gas Stove , B/ Pressure Cooker , B/ Cookware Set , C/ Dinner Set , D/ Cup Plate Set , E/ Cutlery Set , F/ Mixture Grinder , G/ Electric Kattle , H/ Microwave Oven , I/ Container , Conference Table , Conference Chair (Elentra-112 Steel Frame Fixed Chair)
Contract Date: Jun 16, 2026 Contract Value : ₹ 4.10 Crore
Government Departments No of Bidders 2
Assam View Result →
25.
Housing Urban and Rular Development #11299244 Price Bid
Tender for General-Tb, Mananthavady-Cctv, Audio-Supply And Installation Of Cctv And Audio System In The Conference Hall At Tb Mananthavady, Wayanad-General Electronics Work
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Kerala View Result →
26.
Public Administrative Department #11292857 AOC
Tender for Electronic Audio System And Smart Digital Board System Under The Scheme Modification And Upgradation Of Rooms For Panchayat Office Conference Hall. Activity Id- 127537537
Contract Date: Jun 23, 2026 Contract Value : ₹ 1.07 Lakh
Local Bodies No of Bidders 3
West Bengal View Result →
West Bengal View Result →
28.
Housing Urban and Rular Development #11273502 Price Bid
Tender for Annual Maintenance Of Audio And Visual System In Conference Room On 8Th Floor Of Aranya Bhawan, La-10A, Sector - Iii, Salt Lake, Kolkata - 700106, Government Of West Bengal, For One (01) Year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
29.
Educational and Research Institute #11272255 AOC
Bids Are Invited For Audio Visual Items And Stage Lighting System For New Academic Block At Nit Delhi Controlling Receiver Upto 30 Meter Range , Full Hd Hdmi Video Capture Card With Hdmi Loop Out And Usb Output , Room Controlling Device , 10 Inch Wall Mount Touch Controller , 8 Chanel Power Sequencer , 8 Chanel Light Sequencer , 16 Port Poe Ethernet Network Switch , 24 Port Gigabit Ethernet Network Switch , 42U Floor Mount Rack , Cat 6 Utp Ethernet Cable Per Meter , 2 Sq Mm Two Core Speaker Cable Per Meter , 1 Sq Mm Three Core Control Cable Per Meter , 2 Point 5 Sq Mm Three Core Power Cable Per Meter , 4 Sq Mm Three Core Power Cable Per Meter , Other Required Connecting Cables And Required Accessories As Per Requirement For Auditorium Setup , Other Electrifications Works Required To Install Av Equipment In Classrooms , Front Curtain , Back Curtain , Frill , 50Mm Dia B Class Gi Pipe , Wings , Stage Peritoneum Work , M S Pipe Ladders To Be Provided On Sides Of The Stage , 200 Watt Led Profile Spot , 200W Full Power Light Source , Led Par 54Pcs High Brightness , 200Watt Plano Convex Spot Light , 200 Watt Led Fresnel Light , 400W Led Blinder , 300W Beam Moving Head , Lighting Console With Internal Flash Drive , Electrical Panel Made Out Of Ms Sheet Painted In Gray Colour , Dmx Splitter With One Dmx Input And 6 Buffered Outputs , Light Point Wiring From Patch Panel , 3 Core Dmx Cable With Sheathed Housing On The Cable , Lighting Cl , Installation Charges For Stage Furnishing And Lighting , State Of The Art Active Indoor Led Display With Glue On Board With Led Wall Controller , 86 Inch Ultra Hd Interactive Flat Panel Display , Digital Podium , Ai Based Auto Tracking Ptz Hybrid Video Conferencing Camera , Ceiling Mount Kit For Vc Camera , Visualizer With Dtd Cabinet , Set Of Two Wireless Handheld Microphone With Dual Channel Receiver , All In One Audio Digital Signal Processor With 8 Input And 8 Output , 450 Watt Dual Channel Lifier , 100 Watt Wall Mount Speakers , Ultra Hd Hdmi Matrix Swicther With 4 Hdmi Input And 4 Hdmi Output , Video Mixing Device With 4 Hdmi Input And 1 Hdmi Output , Hdmi Capture Card With Usb And Hdmi Loopout , Ultra Hd Hdmi Extender Over Cat 6 Tx Rx Set Upto 50 Meter Range , Ultra Hd Hdmi Cable 15 Meter , Usb 3 Point 0 Booster Cable 10 Meter , Cat6 Ethernet Cable Meter , 9U Floor Mount Rack , Other Required Cables And Accessories , State Of The Art Active Indoor Led Display With Glue On Board Technology With Led Wall Controller , 65 Inch Ultra Hd Interactive Flat Panel Display , 300 Watt Dual Channel Lifier With Combine Bridge Output Of 600 Watt , Ultra Hd Hdmi Matrix Switcher With 4 Hdmi Input And 4 Hdmi Output , Hdmi Capture Card With Usb And Hdmi Loop Out , Cat6 Ethernet Cable Per Meter , Floor Mount Stand For 86 Inch Interactive Display , Micro Pc Or Ops Pc I5 8Gb Ram 512 Gb Ssd With Keyboard And Mouse , Usb Video Conferencing Camera , Wireless Conference Speakerphone , 100 Inch Ultra Hd Interactive Flat Panel Display , Dtd Cabinet With Visual Presenter , Camc Charges For 2Nd Year , Camc Charges For 3Rd Year , Camc Charges For 4Th Year , Camc Charges For Total Quantity : 5668
Contract Date: Ref. Documents Contract Value : ₹ 12.98 Crore
Local Bodies No of Bidders 4
Delhi View Result →
30.
Power #11264806 AOC
Bids Are invited for 55 Smart Ultra Hd Led Tv , 65 Inch Uhd Led Tv , Motorized Projection Screen , Ptz Video Conferencing Camera , Center Controler Unit , Pa Chairman Unit Conference System , Pa Delegate Unit Conference System , Wireless Lapel Microphone , Rj45 Distributor Switch , Patch Cord 2 Mtr Cat 6A , Patch Cord Cat6 20 Meters , Digital Signal Processer Dsp Unit , Audio Power Amplifier , Wall Mount Speaker , Ceiling Speaker , Usb 3.0 Cable Male To Female 10 Meter , Hdmi Switcher , Hdmi Extender Splitter , Control Keypad , 8 Port Poe Switch , 17U Lockable Rack With Pdu And Cooling Fan , Camera Mounting Kit , Cables, Connectors And Other Fixture Consumables , Installation Charges Installation Testing And Commissioning Of Above Equipments And Programming Of Dsp Total Quantity : 54
Contract Date: Ref. Documents Contract Value : ₹ 18.19 Lakh
Boards / Undertakings / PSU No of Bidders 5
Himachal Pradesh View Result →
31.
Communications and Information Technology  #11263702 Technical Bid
Tender for Supply Installation Testing and Commissioning of 4 Nos Casette Type Split Acs And Audio System At Conference Hall At 2Nd Floor Daksadan Hyderabad (2Nd Call)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Telangana View Result →
Kerala View Result →
33.
Public Administrative Department #11246348 AOC
Bids Are Invited For Custom Bid For Services - Comprehensive Annual Maintenance Contract (Camc) Of Audio And Video Conference Equipment
Contract Date: Ref. Documents Contract Value : ₹ 6.36 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Delhi View Result →
Delhi View Result →
35.
Public Administrative Department #11242713 AOC
Tender for The Work Of Replacement Of Audio Conference System At Hon. McS Conference Hall On 2Nd Floor In Mhos Old Building.
Contract Date: Jun 08, 2026 Contract Value : ₹ 1.01 Crore
Local Bodies No of Bidders 2
Maharashtra View Result →
36.
Educational and Research Institute #11223212 Technical Bid
Tender For Supply And Fixing Of Mechanical Engineering Research Laboratory Furniture(Rp-157) Of New Academic Block At Smvd University, Kakryal, Katra , Research Lab, Mechanical Engineering, Smvd University Katra , Table For Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 1500 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. Dimensions Tolerance + 20 Mm. , Table For Faculty Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 2000 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor.Dimensions Tolerance + 20 Mm. , Chair For Cabin & Faculty Rooms - Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Medium Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Malaysian Moulded Hot Pressed Plywood (12+6)Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm. Seat And Back Shall Be Joined With Hr Steel Sheet. The Armrest Shall Be Used Pp Arm Fixed Type Completely Joint With Seat. The Chair Shall Have Synchro Knee Tilt Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 480±10Mm(W) X 495±10Mm(D) And Back Size Shall Be 590±10Mm(H) From Seat & Overall Height = 1030±10Mm. Dimensions Tolerance + 20 Mm. , Executive Table For Cabin 3 - Supplying & Installing Of Table With Eru And Pedestal Having Following Specifications. The Table Shall Be Supplied In Completely Knock Down Conditions With An Overall Size W1800 X D1800 X H750mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1800 X 900Mm Made Up Of 50Mm Thick Plpb With Approved Laminate And Finish As Per Approved Shade. The Top Edge Should Cladded With 1.2Mm Thick Extruded Aluminium Section All Around The Worktop And Die Cast End Caps On Joints For Better Strength Of The Table. The Profile Shall Be In Rectangle Shape And Enclosed By Flapper Box For Electric Provision. The Top Shall Be Supported On Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 50Mm Thick Medium Density Fibre-Board Linear In Profile And The Edges Cladd With Extruded Aluminium Profile. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Particle Board And Shall Be Linear In Profile. The Table Shall Be Supplied With Credenza Unit With An Overall Size 900Mm X 450Mmmm That Shall Be Constructed From Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With 25Mm Thick Top And Other Parts 18Mm Thick Like Shutter, Back, Facia Etc. The Drawer And Shutter Shall Be Operated With Ball Bearing Sliding Channel And Concealed Crank Hinge. G-Profile Aluminium Handle Shall Be Supplied For Ease Of Opening. The Eru Unit Shall Be Mounted On 38Mm Dia. Leg. Fixed Pedestal Shall Be Supplied With An Overall Size 380Mm X 400Mm X 600Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Top Shall Be 25Mm Thick, Side, Back, Facia Shall Be 18Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer Having Same. The Drawer Shall Be Operated With Ball Bearing Sliding Channel To Enable Smooth Operation. Aluminium Handle Shall Be Provided For Ease Of Opening. For Locking Provision Central Lock Mechanism Shall Be Given In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted On Aluminium Round Leg. Dimensions Tolerance + 20 Mm. , Executive Chair For Cabin 3- Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Hydraulic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm & Overall Width/Depth = 740±10 Mm.. Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin 3 - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Powder Coated 50-60? (Dft) Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 520±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1030±10 Mm, Overall Depth = 620±10 Mm & Overall Width = 620±10 Mm. Dimensions Tolerance + 20 Mm. , 2-Seater Sofa For Cabin 3 - Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm & Overall Height = 800±10 Mm. Dimensions Tolerance + 20 Mm. , Centre Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 1200Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , Corner Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. , Wooden Almirah For Cabin Faculty Room & Hall - Supplying & Placing Storage Unit With An Overall Size 900Mm X 450Mm X 2000Mm. Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 3 Nos. Of Adjustable Shelf And 1 Fixed Shelf. 2 Normal Shutter And 2 Glass Shutter Shall Be Provided For Closing And Opening The Shutter. The Glass Shutter Shall Be Made 4Mm Clear Glass Insert Within Aluminium Profile. The Shutter Shall Be Operated With Concealed Crank Hinge With Ss Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. Dimensions Tolerance + 20 Mm. , Steel Almirah For Cabin Faculty Room & Hall - Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. Dimensions Tolerance + 20 Mm. , Steel Bookcase For Cabin & Faculty Room - Providing And Supplying Metal Book Case With An Overall Size 915 Mm (W) X 320 Mm (D) X 1750Mm (H). The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. All Components Shall Be Made Of 0.8Mm High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure.Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin & Faculty Rooms - Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Cushion Arm With Leatherite Covering. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Circular Pipe Having Dia. 28.6Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 480±10 Mm(W) X 460±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 580±10 Mm(H) From Seat & Overall Height = 1020±10 Mm, Overall Width = 610±10 Mm & Overall Depth = 670±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Conference Table - Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2400Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Have Same Size Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Single Sided Flapper Box Shall Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 900Mm X 570Mm. The Gable End Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Be Supported On Ss Pipe Leg 202 Grade. It Shall Have Cross Section Area 80Mm X 20Mm. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Main Chair For Conference Table - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 720±10 Mm(H) From Seat. Overall Height Shall Be = 1180±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Chairs For Conference Table - Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 520±10 Mm(H) From Seat. Overall Height Shall Be = 980±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Discussion Table- Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 900Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Table Understructure Shall Be A Combination Of Ms Powder Coated And Pre-Laminated Particle Board. There Shall Shoe Provided At The Base To Avoid Scratches On The Floor. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Chair For Discussion Table - Supplying And Placing Lounge Chair. The Seat Shall Be Made Of 12 Mm Thick Hot Pressed Plywood Upholstered With High Resiliance Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535 Gsm And The Back Shall Be Made Of Wooden Frame Upholstered With High Resiliance Moulded Polyurethane Foam 25Mm Thick Having Density 32Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535Gsm. The Frame Structure Shall Be 4 Legs Support Type Made Up Of Reducing Pipe Frame Powder Coated Tubular Pipe Having Cross-Section Area Dai 19Mm Thick. The Seat Size Shall Be 430±10 Mm (D) X 450±10 Mm (W) And Back Size Shall Be 500±10 Mm (W) X 400±10 Mm (Ht) From Seat. Overall Height Shall Be = 840±10 Mm, Overall Depth = 540±10 Mm & Overall Width = 580±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Workstation For Hall - Supplying & Placing Modular Workstation In Completely Knock Down Conditions With Size :- W1200 X D600 X H750/1200Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure. The Worktop Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Re Lam Particle Board With Laminate And Sealed With 2Mm Thick Pvc Edge Banding. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Plpn. Partition :- 60Mm Thick Panel Based Partition Of Height 1200Mm Having Provision Of Fabric / Soft Pin Up Board/ Laminate / Race Way. Worktop :- 25Mm Thick Plpb Board With Pvc Edge Banding. All Aluminum Parts Shall Be Pretreated And Duly Powder Coated Of 40?-50? Thick. Raceway Shall Be Provided Of Aluminum Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminum Extrusions Of Size 60X19mm With 1.5Mm Thick And Should Be Covered With Die Cast End Caps On Joints, 2 Ways, 3 Ways & 4 Ways Caps As Required. Wire Management Partition Shall Have Concealed Wire Management Capabilities And Shall Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. Mobile Pedestal :- (2D + 1F) 18Mm Thick Plpb Board With Pvc Edge Banding, Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. A Nylon Castor Based Cpu Unit Shall Be Provided With 18Mm Thick Plpb. Dimensions Tolerance + 20 Mm. , Chair For Workstations - Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Foam Net Tapestry 0.9Mm Thick And 300 Gsm And The Back Shall Be Made Of Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Adjustable Lumbar Support. The Chair Shall Be Supplied With Injection Moulded Pu Adjustable Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Actice Bio-Synchro Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Beinjection Moulded In 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 520±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 495±10 Mm(W) X 610±10(H) From Seat & Overall Height = 1010±10 Mm. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , 2 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 2 Locker Unit. Each Locker Shall Have 1 Nos. Of Hanging Rod. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 3 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 3 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 4 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 4 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , Lab Over Head Unit- Providing And Fixing Lab Over Head Unit With Overall Dimensions 750(W)Mm X 320(D)Mm X 675Mm(H). Over Head Unit Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet. Each Shelf Shall Have Load Carrying Capacity Of 30-40 Kgs. Mp With 180 Degree Cam Lock. Semi Recessed Handle And Ss Hinge. Shutter Shall Be Provided With A Mp Lock. , Laboratory Lab Stools- Providing And Placing In Position Ht. Adjustable Stool With Back. The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm (W) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 40 +/-2 Kg/M3. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079/ Hr ), Powder Coated ( Dft 40-60 Microns ). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Dimensions Tolerance ±20 Mm.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Jammu And Kashmir View Result →
Delhi View Result →
38.
Civil Aviation #11203219 AOC
Bids Are invited for Conference Table , High Back Executive Chair , Revolving Chair Mid Back , Visitor Chair , 98 Inch Monitor Display , 55 Inch Monitor Display , 23Dot8 Inch Interactive Display , Cable Cubby , Usb A B , Hdmi Ultra 9 , Usb C 6 , Collaboration Switching System , Hdmi Twisted Pair Transmitter , Hdmi Twisted Pair Receiver , Hdmi Matrix Switcher , Two And Four Input Usb Switchers , Ai Autotracking 4K Ptz Camera , Matrix Tracking Box , 12 By 8 Dsp With Aec And Dante , Audio Power Amplifier , 6 Dot 5 Inch Two-Way Ceiling Speaker , Column Array Speaker , Ceiling Microphone Array , Ceiling Microphone Suspension Kit , Network Switch , Control Processor , Touch Panel Control Interface , Ultra Flexible Premium High Speed Hdmi Cable , Usb 3 Dot 0 Active Extension Cable , Usb 3 Dot 0 A Male To B Male Cable , Usb 2 Dot 0 Active Extender Cable , Superspeed Usb 3 Dot 0 Type A To Type B Cable , Usb Type A To Usb Mini-B Cable , Speaker Cable , Dual Shielded Twisted Pair Control Cable , Shielded Twisted Pair Cable , Shielded Rj45 Plug Kit , Underdesk Mount Clip , Underdesk Mounting Bracket , 21U Custom Equipment Rack , 6 Kva Ups , Power Cable , Mcb Distribution Box , 16A Mcb , 6A Mcb , Plug Tops , 5A Power Supply Sockets , Sitc And End To End Testing Of Entire Project , Documentation And Training , Camc For First Year , Camc For Second Year Total Quantity : 827
Contract Date: Ref. Documents Contract Value : ₹ 87.37 Lakh
Boards / Undertakings / PSU No of Bidders 6
Tamil Nadu View Result →
39.
Agriculture #11202719 Technical Bid
Tender for Providing Audio & Video Conference System In First Floor Conference Hall & Supply Installation Testing and Commissioning of 58.8 Genset At Agriculture Bhawan Phase-Vi S.A.S Nagar
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Punjab View Result →
40.
Defence #11201282 AOC
Bids Are Invited For Supply Of Executive Main Desk Solid Wood Veneer Mdf With Pu Finish , Executive High Back Chair Ergonomic Leather Premium Fabric , Visitor Chair 4 Nos Matching The Executive Theme , Recliner Chair Manual Or Motorised With Premium Leatehr , Coffee Table Wood Glass Marble Top , Side Table Next To Reclinder , Safe Keeping Unit , Executive Leatheritte Sofa Set , Console Table Behind Main Table Desk , Wall Texture Painting Italian Texture Metallic Stucoo , Wooden Wall Panelling Behind Main Desk Feature Wall , Wallpaper Premium Subtle Patterns , Acoustic Wall Panels Decorative With Cushioned Italian Texture 5Ft X 4Ft , False Ceiling Gypsum Wooden Strips 6Ft X 6Ft , Cove Lighting In Ceiling 6Ft X 6Ft , Wall Mounting Matching The False Ceiling , Premium Carpet Inside The Oic Cabin 10 Ft X 6Ft , Ergonomic Aesthetic Ceiling Light , Warm Led Recessed Lights With Two Different Light Set Up , Dimmer Switches For Ambient Lighting , Floor Lamps Along The Wall Sides Matching The Carpet Colour 5Ft X 4Ft , 4K Led Tv With Amoled Display For Presentation And Conferencing , Cable Management Trays To Be Flused With The Main Executive Table Approx 15 Meters , Telephone Corded And Wireless , Biometric Smart Lock Cabinet For Holding Secured Documents , Roller Blinds With Zebra Prints 5 Ft X 4Ft , Uv Blocking Films On The Existing Windows Approx 25 Meters , Glass Display Shelf Of 4Ft X 5Ft , Award Display Units Of 6Ft X 3Ft , Artificial Indoor Plants Of Medium Size , Humidifier And Air Purifier , Coaster And Executive Table Mats , Executive Pen Stand, Leather Desk Pad, Paper Tray Set, Paper Shredder , 24 Hours Branded Digital Or Analog Wall Clock , Succession Board With The Unit Emblem And Name Board At The Main Entrance Door , Executive Centre Chair Of Premium High Quality Leatherite For Conference Room , Acoustics Complaint Wall Panel, High Frequency Speech Range, Video Conference Room, Charcoal Wall Panel , Video Conferencing Complaint Led 4K Uhd Tv With Multiple Hdmi, Display Ports, Usb, Wireless Casting , Audio Extension For Acoustic Enhancement Additional Speakers , Project Submarine Laser Cut Crest Acrylic Material With Led Back Lit 3Ft Height , Acoustic Complaint Absorptive Aesthetic Wall Papering Textured For Surrounding , Backdrop Panelling Of Video Conferencing Display Panel Size 5Ft X 3Ft X 3 , Conduit Cover For Concealing Of Loose Electrical Cables, Vc Cables And Ofcs Approx 20 Meters , Wall Mounted Repeater Relay Displays For Horizontal Display Halway Seated Far From The Front 55 Inch 4K Uhd , Erognomic Officer Chair Adjustable And Breathable Mesh , L Shaped Work Bench , Mobile Pedestal Drawer Unit , Visitor Chair , Documents Trays In, Out And Pending , Hanging File Folders , Archive Boxers Labelled , Cabinet For Storing Files And Documents , Lockable Table Drawers Next To The Work Bench , High Quality Leatherite Sofa 3 Plus 2 With Dark Colour Matching The Ambient Office Texturing , Magazine Holder With Minium Of 6 Racks , Coffee Table With Glass Top , 32 Inches Smart Led Tv , Provisioning Of Double Door Refrigerator , Provisioning Of Microwave Oven , Electric Kettle Of Medium Size , Water Purifier Of Minimum 10 Litre Capacity , Toaster Or Sandwich Maker , Open Shelf Of 4Ft X 3Ft Dimension , Coffee Mugs Ceramic Material With The Unit Logo Imprinted , Dinner Sets From Borosil Utensils , Glass Tumblers , Thermos Flask , Bowls And Cutleries , Tea Cups, Saucer, Glass Or Copper Water Bottles Total Quantity : 274
Contract Date: Ref. Documents Contract Value : ₹ 25.60 Lakh
Government Departments No of Bidders 13
Andhra Pradesh View Result →
41.
Housing Urban and Rular Development #11198210 Price Bid
Providing External Supply Arrangement, Vrv Air Conditioning, Lift, D.G. Set, Solar Power, Video Conference, Audio Visual System And To New Collector Office Building At Amravati.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
Andhra Pradesh View Result →
43.
Educational and Research Institute #11191269 AOC
Tender For Supply And Installation Of Furniture At Library And Computer Building. , Furniture , Library Chair -01 -Seat Size: 50.0Cm. (W) X 48.0 Cm. (D) -Back Size: 53.0 Cm. (W) X 39.0Cm. (H) -Injection Moulded Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ & Hardness 16 Kgf. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -M.S. Powder Coated Frames (Dft 50 Microns) For 4 Leg Chairs -M. S Pipe Dia 25Mm (Vendor To Submit Powder Coating Laboratory Test Certificate) -Glass Filled Polypropylene Armrest With The Tubular Frame. -Vendor Should Submit Detail Shop Drawings With All Dimensions. , Office Chair Seat Size- 53.5 Cm. (W) X 51.0 Cm. (D), Of 1.5 Cm Thickness Plywood Preferably Hot-Pressed, Furnished With Fabric Covers -Mesh Back Size- 51.0 Cm. (W) X 70.0 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Glass Filled Nylon Armrest With The Tubular Frame Of 6 Cm Hight(Adjustable) -Center Tilt Synchro Mechanism With Seat Slide & Multi Lock, Revolving 360° -Head Rest Sub-Assembly With Hight Adjustment Up To 4 Cm. -Pneumatic Height Adjustment Of 9.5Cm, Pedestal Assembly Of Polished Aluminium With Twin Wheel Injection Moulded Soft Castors Of Nylon With Pu Lining, Having Up To 6 Cm Wheel Diameter. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation Chair Seat Size- 53.5 Cm. (W) X 51.0 Cm. (D), Of Thickness 1.5 Cm Plywood Preferably Hot-Pressed, Furnished With Fabric Covers. -Mesh Back Size- 51.0 Cm. (W) X 70.0 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Glass Filled Nylon Armrest With The Tubular Frame Of 6 Cm Hight(Adjustable) -Center Tilt Synchro Mechanism With Seat Slide & Multi Lock, Revolving 360° Anti-Shock Mechanism. -Pneumatic Height Adjustment Of 9.5Cm, Pedestal Assembly Of Polished Aluminium With Twin Wheel Injection Moulded Soft Castors Of Nylon With Pu Lining, Having 6 Cm Wheel Diameter. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Chair Seat Size: 49.0 Cm. (W) X 51.4 Cm. (D) Of Thickness 1.2 Cm Plywood Preferably Hot-Pressed, Furnished With Synthetic Leather Over Moulded High Resilience Polyurethane Foam. -Mid Back Size: 51.6 Cm. (W) X 65.7 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 55 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Chrome Plated Up-Down Adjustment Armrest Of 8 Steps. -360° Revolving Type Front Pivot Synchro Mechanism, 4-Position Locking With Anti-Shock Feature, Tilting Ratio Of 1:2, Single Point Control. -Back Height Adjustability, Adjusted In 5 Positions. -Pneumatic Height Adjustment Of 10Cm, Pedestal Assembly (Pedestal- 65 Cm, Pitch-Center Dia. 75Cm) Of Polished Aluminium With Twin Wheel Injection Moulded Castors. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Study Chair With Writing Pad Seat Size : 50.0Cm. (W) X 48.0 Cm. (D) Furnished With Fabric Covers And Moulded Polyurethane Foam -Back Size : 53.0 Cm. (W) X 39.0Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -M.S. Powder Coated Frames Dia 25Mm (Dft 50 Microns) For 4 Leg Chairs With Glass Filled Polypropylene Shoe (Vendor To Submit Powder Coating Laboratory Test Certificate) -The Full Desklet Made Of 1.3 Cm. Thick, Compact Laminate Board. Having Front And Back Adjustment Of 4 Cm -Outer Dimension 59.5±0.1Cm. (W) X 29.0±0.1Cm -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Table With Seating Capacity Of 18Seats 2 Str Main - 1350 X 600 X 740 - 2 Nos. -2 Str Shared - 1350 X 600 X 740 - 2 Nos. -2350W - 2350 X 850 X 740 - 2 Nos. -Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board With A High-Quality Wood Matching 2 Mm Thick Pvc Lipping; Plastic Access Flap Is Provided For Easy Access To Wires And Cables -Under Structure Consists Of 18Mm Thick Pre-Laminated Twin Board Wood Matching 2 Mm Thick Pvc Lipping -Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of Wood Matching 2 Mm Thick Pvc Lipping -Powder Coated Accent Metal Strip Provided Below Work Surface Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent Steel, Epoxy Polyester Powder Coated (Dft 40-60 Microns). (Vendor To Submit Powder Coating Laboratory Test Certificate) -Wire Management- An Array Of Panels Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables. Provision To Mount 6 Module Electric Switch Plate Is Provided Below Worktop. Cut-Out On Top With Two-Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Table With Seating Capacity Of 30 Seats 2 Str Main - 1350 X 600 X 740 - 2 Nos. -2 Str Shared - 1350 X 600 X 740 - 8 Nos. - 2Str -2350 X 850 X 740 - 2 Nos. -Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board With Wood Matching 2 Mm Thick Pvc Lipping; Plastic Access Flap Is Provided For Easy Access To Wires And Cables -Under Structure Consists Of 18Mm Thick Pre-Laminated Twin Board Of High-Quality Wood Matching 2 Mm Thick Pvc Lipping -Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of High-Quality Wood Matching 2 Mm Thick Pvc Lipping -Powder Coated Accent Metal Strip Provided Below Work Surface Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent Steel, Epoxy Polyester Powder Coated (Dft 40-60 Microns). (Vendor To Submit Powder Coating Laboratory Test Certificate) -Wire Management- An Array Of Panels Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables. Provision To Mount 6 Module Electric Switch Plate Is Provided Below Worktop. Cut-Out On Top With Two-Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Two-Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette.(Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Leg Assembly Is A Welded Assembly Made In Stainless Steel Tube & Plate With Plastic Endcap Of 146 X 90 X 85.5 Cm With Seat Height Of 45 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Three-Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layer Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) O Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 206 X 90 X 85 Cm Seat Height 45Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , One Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) Or Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 86 X 90 X 85 Cm Seat Height 45Cm. -Vendor Should Submit Detail Shop Drawing With All Dimensions. Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) O Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 86 X 90 X 85 Cm Seat Height 45Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Mobile Compactor Storage Unit-01 3 Bay Drive Type Compactors With 3 Bay Sd - 1 No, 3 Bay Td - 1 No, 3 Bay Sl - 1 No. 3 -Size Of Compactor 2361H Mm X 915 W Mm X 457D Mm, 3 Bay Channel 2400 Mm - 3 No, 3 Bay Channel 800 Mm - 3 No. -Main Body: Rigid Knock Down Construction Made Of 0.8 Mm Thick. Crca Or Equivalent Grade Steel Having 5 Loading Levels Formed By 4 Adjustable Shelves For 1980 Mm Height Body And 6 Loading Levels With 5 Adjustable Shelves For 2361Mm Height Body. -Main Body Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction: Rigid Knock Down Construction Made Of 0.8 Thick Crca Or Equivalent Grade Steel. Each Body Block Consists Of 1 Main Unit & Then Add-On Units. -Front Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Panel Made Of 0.6 Thick Crca Or Equivalent Grade Steel Fixed Together Using Machine Screws To Prevent Access To Inside Files From The Outside. -Door Frame Made Of 0.8 Thick Crca Or Equivalent Grade Steel Of 2 Vertical Door Stiffeners Providing Rigidity To The Entire Body. -Shelf Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction 12-Bend Panel Made Of 0.7 Thick Crca Or Equivalent Grade Steel Having Max Load Bearing Capacity Is 100 Kg Uniformly Distributed Per Shelf, Height Of 351Mm Between Two Shelves. The Last Loading Level For Shelf Is 1721Mm From Ground Level For 1980H Body And 2107Mm From Ground For 2361H Body. Shelves Are Mounted On Support Brackets & Shelf Level Can Be Adjusted At Approx. 25.4 Pitches. There Are 4 Adjustable Shelves Per Body For 1980H And 5 Adjustable Shelves Per Body For 2361H, Giving 5 And 6 Loading Levels For 1980H And 2361H Body Respectively. -Storage Capacity Made Of 0.8Thick Crca Or Equivalent Grade Steel Having Hinged Door Have Recessed Die Cast Handle Cum Lock With 3 Way Locking Through A Lever & Shooting Bolt And Can Hold Up To 10 Nos. Of Box Files -Under Structure Construction Welded Frame Suitably Fabricated To Bear The Loads Based On Configuration Consists Of The Main Channel, Body-Fixing Channel, U-Channel, And Z-Channel Made Of Hr Sheet 3 Mm Thick. -Under Structure Construction Finish Epoxy Polyester Powder Coat Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Movements Of The System Is Drive Type Configuration Achieved By Rotating A Pu Hand Wheel Connected To The Rollers Through A ‘Sprocket-Chain Arrangement Mounted On The Side Of The Body Covered By A 1 Mm Thick Crca Or Equivalent Grade Steel Sheet Drive Unit Cover With Dimensions 1202Mm X 398Mm X 87Mm -Rail Channels- A ‘C Section 3 Mm Thick Hr Sheet On Which Rail Ms Bright Bar Of Sq 25.4Mm Is Firmly Fixed From Bottom Using Counter Sunk Screws. The Rail Channels Are Of 3 Lengths I.E., 800Mm, 1600Mm And 2400Mm. Label Holder Is An Aluminium Extrusion Of Length 453Mm For Ld/Sd And 910Mm For Td, Fitted On To Front Cover Of Body. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Mobile Compactor Storage Unit -02 3 Bay Drive Type Compactors With 3 Bay Sd - 1 No, 3 Bay Td - 2 No, 3 Bay Sl - 1 No. -Size Of Compactor 2361H Mm X 915 W Mm X 457D Mm, 3 Bay Channel 2400 Mm - 1 No, 3 Bay Channel 800 Mm - 1 No. -Main Body : Rigid Knock Down Construction Made Of 0.8 Thick. Crca Or Equivalent Grade Steel Having 5 Loading Levels Formed By 4 Adjustable Shelves For 1980 Mm Height Body And 6 Loading Levels With 5 Adjustable Shelves For 2361Mm Height Body. -Main Body Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction: Rigid Knock Down Construction Made Of 0.8 Thick Crca Or Equivalent Grade Steel. Each Body Block Consists Of 1 Main Unit & Then Add-On Units. -Front Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose -Back Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Panel Made Of 0.6 Thick Crca Or Equivalent Grade Steel Fixed Together Using Machine Screws To Prevent Access To Inside Files From The Outside -Door Frame Made Of 0.8 Thick Crca Or Equivalent Grade Steel Of 2 Vertical Door Stiffeners Providing Rigidity To The Entire Body -Shelf Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction 12-Bend Panel Made Of 0.7 Thick Crca Or Equivalent Grade Steel Having Max Load Bearing Capacity Is 100 Kg Uniformly Distributed Per Shelf, Height Of 351Mm Between Two Shelves. The Last Loading Level For Shelf Is 1721Mm From Ground Level For 1980H Body And 2107Mm From Ground For 2361H Body. Shelves Are Mounted On Support Brackets & Shelf Level Can Be Adjusted At Approx. 25.4 Pitches. There Are 4 Adjustable Shelves Per Body For 1980H And 5 Adjustable Shelves Per Body For 2361H, Giving 5 And 6 Loading Levels For 1980H And 2361H Body Respectively. -Storage Capacity Made Of 0.8Thick Crca Or Equivalent Grade Steel Having Hinged Door Have Recessed Die Cast Handle Cum Lock With 3 Way Locking Through A Lever & Shooting Bolt And Can Hold Up To 10 Nos. Of Box Files -Under Structure Construction Welded Frame Suitably Fabricated To Bear The Loads Based On Configuration Consists Of The Main Channel, Body-Fixing Channel, U-Channel, And Z-Channel Made Of Hr Sheet 3 Mm Thick. -Under Structure Construction Finish Epoxy Polyester Powder Coat Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Movements Of The System Is Drive Type Configuration Achieved By Rotating A Pu Hand Wheel Connected To The Rollers Through A ‘Sprocket-Chain Arrangement Mounted On The Side Of The Body Covered By A 1 Mm Thick Crca Or Equivalent Grade Steel Sheet Drive Unit Cover With Dimensions 1202Mm X 398Mm X 87Mm -Rail Channels- A ‘C Section 3 Mm Thick Hr Sheet On Which Rail Ms Bright Bar Of Sq 25.4Mm Is Firmly Fixed From Bottom Using Counter Sunk Screws. The Rail Channels Are Of 3 Lengths I.E., 800Mm, 1600Mm And 2400Mm. Label Holder Is An Aluminium Extrusion Of Length 453Mm For Ld/Sd And 910Mm For Td, Fitted On To Front Cover Of Body. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Magazine Stand Overall Dimensions 900Mm(W)X450Mm(D)X1830Mm(H). -Steel Periodical Display Rack Providing, Placing And Supplying Of Display Rack. -Rigid Knockdown Construction, Panels Shall Be Made From Crca Or Equivalent Grade Steel 0.6 Mm Thick -Front Frame Shall Be Made From Crca Or Equivalent Grade Steel 0.8 Mm Thick. Crca Or Equivalent Grade Steel D Grade. -There Shall Be 5 Level Racks, Suitable For Full Cape Size Magazines, Periodicals, Aesthetically Appealing Metal Tray At An Angle For Easy Viewing. -Receding Facility To Access The Storage Behind. -Uniformly Distributed Load Capacity Per Each Shelf Is 40 Kg. -Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) Vendor Should Submit Detail Shop Drawing With All Dimensions. , Storage Cabinet 1 Body Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edge Band. The Shelves Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Back Panel Is 9Mm White Plt Assembled With Suitable Fittings. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. -Doors Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Centre Of The Door Having Suitable Hinges And Hdu Is Fitted With Height Adjustment And Has A Three-Point Lock. -All The Storages Are Fitted With A 6 Mm Leveller At Bottom For Levelling As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Storage Cabinet -02 Body Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edge Band. The Shelves Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Back Panel Is 9Mm White Plt Assembled With Suitable Fittings. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. -Doors Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Centre Of The Door Having Suitable Hinges And Hdu Is Fitted With Height Adjustment And Has A Three-Point Lock. -All The Storages Are Fitted With A 6 Mm Leveller At Bottom For Levelling As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Library Table 1 1650 X 600 Desk Based Modular Workstation With System Ht-750 Mm. -Partial Screens: Fabric T- Mould, 19Mm Thick Screen Of 450Mm Ht., Mounted On Studs. -Legs: Providing Metal Powder Coated Cube Leg Vertical (40X40Mm)& Rigid Support (50X30Mm). Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Understructure Comprising Of Metal Powder Coated Cross, Made Up Of Metal Powder Coated Finish -Wire Management: Electric Switch Plate Of 8+3 Module For Power And Data Points. -Worksurface - 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 1650 Mm W X 600 Mm D. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Library Table -2 2400 X 1200 Providing And Placing Modular Workstation Desk Based Modular Workstation With System Ht - 750 Mm. -Legs: Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Understructure Comprising Of Metal Powder Coated Cross, Made Up Of Metal Powder Coated Finish -Wire Management: Electric Switch Plate Of 8+3 Module For Power And Data Points. -Worksurface - 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 2400 Mm W X 1200 Mm D. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Reception Table Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade Confirming To Edge Banded With Matching 2 Mm Thick Pvc Lipping. -Wire Managementu-Access Flap Along With A Grommet Is Provided On Work Surface For Wire Management. Power Box Made With 0.8 Mm Thick Crca Or Equivalent Grade Steel, With Electric Switch Plate Of 8+3 Module Which Is Fixed With Worktop Along The Width Ataccess Flap Position. Wire Riser Made Of 0.8Mm Crca Or Equivalent Grade Steel Is Provided For Proper Wire Management. -Modesty Panel & Side Skirting - Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping. -Under Structure And Top Shelf - Made Of 18 Mm Thick Pre-Laminated Twin Board Of High-Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping - Hinge Door + Drawer Unit - Made Of 18Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Bottom Is Made Of 5.5Thick Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Are Provided With Cam Lock For Security. -Organizer Plate Made Of 1.2Mm Crca Or Equivalent Grade Steel Is Provided For Magnetic Sticky Notes. -Bag Hanger Hook Made Of 1.2Mm Crca Or Equivalent Grade Steel Is Provided For Bag Hanging 2400 X 1770 X 870 Mm , Side Table Providing, Supplying And Placing Of Side Table. -Side Table Glass Is 10 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade Or Equivalent For Facing With Under Structure. -Under Structure Is A Welded Assembly Made In Ss202 Or Equivalent Grade -Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions , Central Table Providing, Supplying And Placing Of Coffee Table. -Center Table Glass Is 10 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Or Equivalent Grade For Facing With Under Structure. -Under Structure Is A Welded Assembly Made In Ss202 Grade Or Equivalent -Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions , Round Table Circular 900Mm Providing And Placing Meeting Tables With Worktop Height - 750 Mm. Cube Legs Vertical (40X40Mm).Rigid Support-(50X30Mm) Are Available For Work Top Level 750 Mm From Base. -Worktop Is 25Mm Thick Prelaminated Particle Board With Pvc Lipping As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Table A- 750X1500 Providing And Placing Desk Based Modular Workstation With System Height - 750 Mm. -Legs Providing Metal Powder Coated Cube Leg Vertical (40X40Mm) Rigid Support (50X30Mm). Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Under Structure Made Up Of Metal Powder Coated Finish And The Entire Assembly Are Fixed To The Worktop. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. . (Vendor To Submit Powder Coating Laboratory Test Certificate) -Metal Modesty And Wooden Modesty Are Mounted On The Worktop Perforated With The Help Of The Modesty Mounting Brackets At 400 Mm From Ground. -Worksurface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500X 750 Mm For Main Table As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Meeting Table Eight-Seater 2350 X 1150 Mm Work Top Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood; Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. -Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of High-Quality Wood; Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. Aluminium Alloy 63400 Or Equivalent - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. Beside Each Cut-Out, An Additional Cut-Out With Plate Is Provided For Mounting Audio-Visual Cables (E.G. Hdmi, Vga-A, Etc.) Vendor Should Submit Detail Shop Drawing With All Dimensions , Table B Supplying And Placing In Position Main Table, Of Dimension 1800X2100X750 Mm. -Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc. -Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc. -Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood, Edge Banded With Matching 2 Mm Thick Pvc Lipping.  Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc Membrane Pressed On To Top. Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Modular, Space-Optimizing Desk With Bench N (Three-Seater Curved) Providing, Supplying And Placing Of Desk Cum Bench N Seater Product Which Provides An Elegant, Modular Solution With 360-Degree Swivel Seat For Easy Entry/Exit And Height-Adjustable -Legs Are Made Of Ms Erw Or Equivalent Tube Section Of Size 75X25X2 Mm Thick Oval Tube With 5 Mm Thick Hr Bracket Sand 2Mm Thick Crca Or Equivalent Grade Steel Brackets On To The Tubes. -Assembly Is Powder Coated With Epoxy Polyester. Leg Height Varies From 705 To 1005 In Pitch Of 50 As Per Layout. Sturdy Anchoring By Anchor Bolts On To Base Of 8Mm Thick Plate For Proper Resting Of Leg. Shoe Made Of Nylon Are Provided At The Bottom For Covering The Base Plate. -Two Side Clads Made Of E18 Mm Thick Plate With 0.8Mm Thick Pvc Lapping And On The Outside Covered With Welded Metal Structure Made Of 2 Mm Thick Crca Or Equivalent Grade Steel Powder Coated With Epoxy Polyester. -Worktop Are Made Of 25 Mm Thick Pre-Laminated Board Of High-Quality Wood; All The Edge Of Work Surface Should Provide With Machine Pressed 2 Mm Thick Pvc Edge Band Glued With Hot Melt Glue. -Seat Has Self-Closing Mechanism. Seat Under Structure Is Made From Combination Of Welded Fabricated Structure Of 5Mm Thick Hr And 8Mm Thick Ply With Moulded Pu Foam Of Density 55 Kg/Cu.Mtr. With Stitched Fabric Made Of Leatherette Or Foam Back Fabric. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Seat Back Is Made From Combination Of 8Mm Thick Ply With Moulded Foam On Top Which In Turn Is Covered With Stitched Upholstery Made Leatherite As Per Or Foam Back Fabric. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Seat Support Frame Is Made From Combination Of Ms Erw Or Equivalent Grade Tube Section Of Size 80X40X2.5 Mm Thick Rectangular Tube And Ms Erw Tube Section Of Size 48X19.1X2 Mm Thick Oval Tube Welded Together. Assembly Is Powder Coated With Epoxy Polyester. -Modesty Is Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood, All The Edge Of Modesty Are Provided With Machine Pressed 2 Mm Thick Pvc Edge Band Glue With Hot Melt Glue. Vendor Should Submit Detail Shop Drawing With All Dimensions . , Table C 1650X600X770Mm Providing, Supplying And Placing Of Conference Table With Product Size 1650 X 600 X 770Mm -Worktop Should Be Made Of 25Mm Thick High-Quality Wood, Edges Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. -All Tables Are Provided With Heavy Duty Table Connector Made With Metal Integrated Engineering Plastic. -Modesty Should Be Made Of 15Mm High Quality Wood, Edges Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. -Recta Table Modesty Is Provided With A Latch Made Of 2Mm Thick Crca Or Equivalent Grade Steel And Is Powder Coated With Min 45-Micron Thickness Of Epoxy Polyester Coating. Latch Is Fixed With Knurled Bush Made Of 20Mm Dia Ms Rod In A Black Finish. Latch Can Be Used To Align Modesty If Two Or More Recta Tables Are Connected Side By Side. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Modesty Is Provided With Rubber Stopper Made Of Tpe Rubber To Reduce Banging While Folding Table. -Legs Should Be Made By Welding The Combination Of Ms Erw Or Equivalent Grade Round Tube Ø63.5 X 2Mm Thick, Flanges Made Crca Or Equivalent Grade Steel Sheet Of 1.6Mm Thick And 1.2Mm Thick Inside Plates Made Of Hr 5Mm Thick Sheet. Assembly Is Epoxy Polyester Powder Coated (Min 45 Micron). -Legs Are Provided With Casters Of Ø65 Mm Lockable Type For Ease Of Movement And Can Be Locked When Required At Any Position. Each Castor Is Also Provided With 2 Knurled Disk Of 50Mm Dia And 5 Mm Thick Made Of Ms Bar With Zn Black Finish For Levelling Adjustment Of 10Mm.. -Table Top Connected With Spring Loaded Mechanism With Pull Handle Made Of Ms Erw Ø16X1.2Mm Thick With An Insert Tube Of Ø12.7X1.6Mm Thick Tube. Coated With Epoxy Polyester Powder Coated (Min 45 Micron) To Operate Table Top. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Table Top With Modesty Folds Upside At Offset Centre Pivot Provided On Support Bracket Which Is Aluminium Alloy Pressure Die Cast Part Coated With Epoxy Polyester Powder Coat (Min 45 Micron). Modesty Is Connected To Worktop With 90 Deg Rotating Hinge Made Of Engineering Plastic. -All Type Of Tables Are Provided With Power Box Which Has Two Universal Power Socket Of 2 Annual Periodical Maintenance Each, One Switch Of16 Annual Periodical Maintenance And 1 Fuse Of 4 Annual Periodical Maintenance With 1000Mm Cable With Male And Female Gst Connector. -All Tables Are Provided With Wire Channel And Wire Clip Made Of 1.2Mm Thick Spring Steel And Is Powder Coated With Min 45 Micron Thickness Of Epoxy Polyester Coating (Vendor To Submit Powder Coating Laboratory Test Certificate) Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation L Type Providing And Placing Desk Based Modular Workstation With System Height - 1200 Mm. -Partial Screens: Fabric T- Mould, 19Mm Thick Screen Of 450Mm Ht., Mounted On Studs. -Legs Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. -Under Structure Made Up Of Metal Powder Coated Finish And The Entire Assembly Is Fixed To The Worktop. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. -Worksurface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 1500X1500X600 Mm. -Metal And Wooden Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390W X 435D X 646Ht, 1Dr = 1 Box + 1 File, Central Locking. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation 2 -900X600Mm Providing And Placing High-Functionality, Modular Office Workstation System & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thick And Ht - 1200 Including Powder Coated Aluminium Trims. -Fin Are 22.5 Mm Thick Panel Which Are 18 Mm Thick Ply Boards Wrapped With Fabric At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. -Wire Management: Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Up To The Panels Through Concealed Conduits Inside The Blocks. -Half Screen With Frame At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Finish. -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor -Work Surface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 900 Mm W1 X600 Mm D As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation 3- 900X600Mm Providing And Placing High-Functionality, Modular Office Workstation System & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thick And Ht - 1050Mm Including Powder Coated Aluminium Trims. -Fin Are 22.5 Mm Thick Panel Which Are 18 Mm Thick Ply Boards Wrapped With Fabric At Intermediate Level. Bottom Block Is Finished In Metal Finish. -Wire Management: Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Up To The Panels Through Concealed Conduits Inside The Blocks. -Half Screen With Frame At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Finish. -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor -Work Surface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 900 Mm W1 X600 Mm D As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Main Table 1650 X 750, Eru- 1200W X 450D With Pedestal Modular Desk-Based System Of Height 750 Mm. -Cube Legs Are Fabricated By Argo Shield & Have A Square Section. Cube Legs(40X40Mm) And Rigid Support (50X30Mm) Are Available For Work Top Level 750 Mm From Base. -Wire Management: Single Power Box With Raiser For Manager Modules, Single Tables (8+3 Anchor Roma). Soft Closing Access Flap With Brush. -Metal Modesty Is Made From 0.8 Mm Thick Crca Or Equivalent Grade Steel. Metal Modesty Is Mounted On The Worktop With The Help Of The Modesty Mounting Brackets. -Worktop Of 25Mm Thick Prelaminated Particle Board With Pvc Lapping. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390X435X646 Mm, 1Dr = 1 Box + 1 File, Central Locking. Vendor Should Submit Detail Shop Drawing With All Dimensions , Modular, Space-Optimizing Desk Legs Are Made Of Ms Erw Or Equivalent Grade Tube Section Of Size 75X25X2 Mm Thick Oval Tube With 5 Mm Thick Hr Brackets And 2Mm Thick Crca Or Equivalent Grade Steel Brackets Welded On To The Tubes. Assembly Is Powder Coated With Epoxy Polyester. Leg Height Varies From 705 To 1005 In Pitch Of 50 As Per Layout. Sturdy Anchoring By Anchor Bolts On To Base Of 8Mm Thick Plate For Proper Resting Of Leg. -Shoe Made Of Nylon Are Provided At The Bottom For Covering The Base Plate. -Two Side Clads Made Of 18 Mm Thick Plate With 0.8Mm Thick Pvc Lapping And On The Outside Covered With Welded Metal Structure Made Of 2 Mm Thick Crca Or Equivalent Grade Steel Powder Coated With Epoxy Polyester. -Worktop Are Made Of 25 Mm Thick Pre-Laminated Board Of El-P2 Grade And Approved Shade. All The Edge Of Work Surface Are Provided With Machine Pressed 2Mm Thick Pvc Edge Band Glued With Hot Melt Glue. -Modesty Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade. All The Edge Of Modesty Are Provided With Machine Pressed 2 Mm Thick Pvc Edge Band Glue With Hot Melt Glue As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions.
Contract Date: Jun 06, 2026 Contract Value : ₹ 6.64 Crore
Government Departments No of Bidders 8
Maharashtra View Result →
Madhya Pradesh View Result →
45.
Public Administrative Department #11141743 AOC
Providing New Audio Conference And Simultaneous Interpretation System To The Council Meeting Hall, Head Office, Circle No.14 ( Kz ) , Ghmc ( Item No.2 ) 2Nd Call
Contract Date: Ref. Documents Contract Value : ₹ 1.92 Crore
Local Bodies No of Bidders 1
Telangana View Result →
46.
Educational and Research Institute #11134188 Technical Bid
structure waterproof and fire retardant international made hangar with aluminum structure having a span of 25 metres (as per onsite requirement) in width with waterproof and fire-retardant sheet (copy of certificate to be attached) should be strong enough to sustain high speed wind/rain pressure. wooden platform of 4”-9” height made with 19mm thick hard board and bed supported with providing 2”x2” wooden batons in properly leveled having no undulation, create no sound on using and covered with brand (*) new laminated carpet on complete area and 20 ceiling/pedestal fans covering the entire hangar structure. (entire ceiling and both walls from inside of both hangars should be covered with multi-colour cloth/fabric). 10 led metal lights & 50 mojo iron barricades (height 4 ft. x length 6ft.) with wheels should be provided one day before start of the book festival. auditorium (image at annexure-vi) fire retardant (certificate to be attached with tender document with validity) the flex/branding of the book festival may be affixed/provided on the hangar structures (image of hangar structure at page no. 44) as per the details given below: 1. branding on both sides of the hood (triangular shapes) of the hangar structures. 2. branding on the roof in hangar structures. 3. decoration of entry point of the structures with flowers/artificial flowers in consultation with festival/officer in-charge. the designs of the gates should be provided by the vendors for finalizing by the festival/officer in-charge. note: designs of all branding will be provided by nbt. *providing & laying on hire basis a brand new laminated carpet, non-woven needle punch carpet of genuine fiber minimum overall weight 1000 gm/ sgm (+ 5%) having minimum 3.90 mm thickness preferable containing 375 gm polyester fiber or equivalent fiber (+ 5%) and the carpet should not loss the thickness more than 25% after 1000 impact and of required shades & laying with approved adhesive or double side tape wherever required etc. as per the direction of officer-in-charge, i/c covering with polythene sheet till the inauguration of a festival. in case of dew factor, contractor should cover the entire structure of the hangars with waterproof tripal/polythene to avoid damaging of books. , stall: size 3m x 3m construction of stalls each of size 3x3mtr. with three side paneling of octonorm structure with computerized fascia of uniform colour (maximum 8 colour) with nbt logo in each and every stall on vinyl pasting in hindi/english (with flag numbering as per the image shown at annexure-v), consisting of 9 ms shelves of size 96”x8.5” with 2” depth duly powder coated in white colour, 9 led light (each of 9 watt), one octonorm table for counter of the same colour, two black cushioned chair with arms, a plug point for computer, two drinking water bottles (each of 1 ltr.) on daily basis, one small dustbin (10 ltr.) and one kanat of good quality of size 3mx3m size with provision of proper hanging system for covering/closing the stall after the book fair timings. the kanat should be made available to the participants a day before start of the book fair. laying & fixing of new brand laminated carpet(*) in the entire passage of indoor hall including the stall area, in case where structure is not required, should be provided by the contractor) , pagoda (3mtr.x3mtr.) construction of pagodas each of size 3x3mtr. on wooden platform, three side paneling of octonorm structure with computerized fascia of uniform colour (maximum 8 colour) with nbt logo in each and every pagodas on vinyl pasting in hindi/english with flag numbering as per the image shown at annexure-v in english/regional language of size 3m x3m, each with prefab octonorm system of the same colour in each stall, consisting of 9 ms shelves of size 96”x8.5” with 2” depth duly powder coated in white colour, 9 led light (each of 9 watt), one octonorm table for counter of the same colour, two black cushioned chair with arms, a plug point for computer, two drinking water bottles (each of 1 ltr.) on daily basis, one small dustbin (10 ltr.). 4mtr.x4mtr. polythene to cover the books is also required in each stall. , thematic customized gate: thematic/customized gate in line with the theme of the book fair with detailed specifications as shown and approved during digital presentation or as per designed provided by nbt. thematic gate comprises of backlit, wooden frame, mdf board. vinyl pasting and handmade painting (if required) with sufficient parco / led light. , stage: size 32’ x 20’ x 4’ in height made of wooden platform with new brand laminated synthetic carpet (*) with needle punch of blue/red color; • 1 table 20’ x 3’ with table cloth and frill in front or 10 center glass tables with side tables. • 1 lightening lamp • 15 executive wooden cushioned arm chairs with 10 side table of 3ft x 2ft size having vinyl pasting 4 side (design to be provided by nbt) • 10 standing ac tower (each of 5 ton) • 01 led screen wall (20’x8’) or as per stage requirement • 20 led parco light/ beam light (multi-colored on truss structure) for cultural events / programs & cultural • decoration of stage, entry gate & dais with fresh/artificial flowers should only be made after consulting the festival/officer in-charge • the arrangement of stairs with ramp with railings for support (both sides of stage) having vinyl pasting on 4 sides • 50 mineral water bottles (200 ml) for guests on stage, on per day basis • 10 name plates of the guests on stage as per the direction of the festival/officer in-charge. • 50 mojo barricades of 4ft. (height) x 6 ft. (width) with wheels • 2 podiums with nbt logo on sun board on three sides as per design provided by nbt 2 green room in the form of pagoda • size 6mtr.x6mtr. with three side covered with orange paneling, wooden platform with new brand laminated synthetic carpet. • 12 spot lights (9 watt each) • 4 led halogen lights (100 watt each) • 4 full length mirror with proper stand , complete pa system and stage set-up for organizing cultural / rock band programmes with operator for inaugural function and other programs along with provision of fusion and rock musical band playing for the 9 days during the book festival with two helper along with the provision of additional sound & lights as per tech rider of artists (as per the terms & conditions given at annexure-ix) a) box truss – aluminum box truss 60x40x25 with aviation grade material for safety and as per stage size (on all four sides) truss and scaffolding/speaker tower as required b). sharpy designing/pattern as per artist c) warm white led par d). blinder (4x4 motleys) e) colour led (54x3, 32x3) f). colour wash g) atomic strobe rgbw h) smoke machine high powered i) led percons j) avolite light controller/designing of lights patterns k) line array complete pa system venue suited dual, audio system (conical long throw system) – (lacoustic, jbl, dnb martin equivalent) l) bass audio subwoofer (lacoustic, jbl, dnb equivalent) m) side fill jbl, 835p n) foot monitors jbl 915 for stage angled curvature type for musicians o) 1x32 channel soundcraft mixer digital with presets and files (allen heath) p) amplifier audio digital with audio files for pa venue (crown, labgruppen, equivalent) q) amplifier crowns xti-6002 for stage r) di boxes bss/radial s) cordless mic sennheiser 945 for emeee t) shure mx series podium u) cordless shure for singer v) shure qlxd laple headset w) wired mirophones sm58 & sm57 for stage (shure/sennheiser) x) mic stand box big & small y) xlr snack long patch cord networking cabling console software laptop/playable engineer z) walkie talkie with talk back feature , announcement general pa system (digital) with 12 loudspeakers with 25–30-watt lmp and 1 standing mike (jbl/sony/phillips) for announcement purpose. , executive sofa sets (3 seater) with white covers along with 6 central tables , chairs with white cover for seat and back , wheel chair with attendant with proper uniform , queue manager , iron-ms steel barricades (size 4.5 ft. x 3 ft.) , brand new laminated carpet (*) for floor area (same specification as given for carpet in structure at s.no. 1) , tin wall covering with white color cloth with maximum height of 10 ft. , wooden platform with new laminated carpet , ground net (green) , fire fighting equipment (co2 water and powder mix with refilling dates) with one trained personnel with proper uniform for operating fire fighting equipment. , brand new dustbins (big size) plastic with cover , sweepers in proper uniform of the company for cleaning of ground are required one day before start of the book fair and till the end of the book fair (10:00 a.m. to 8:00 p.m.) , security personnel in proper security uniform and necessary equipments are required to be deployed at venue one day before start of the book fair and their after round clock till the end of the book fair: (*) rates may be given on per day basis only: a) supervisor b) guards , fresh painted steel almirah with lock and key (full size) , printing of flex & hoarding with mounting on iron frame in different locations (onsite/offsite), including gates, participants lists, backdrops, signages, etc. , vinyl digital print (3.3 ft. x 8 ft.) , pedestal / ceiling fans , wooden/steel tables 2’x5’ , selfie point on sunboard (5mm with digital vinyl print and mounting/framing) having heavy base (picture enclosed) – size: 4’x6’ and as per requirement , octonorm table for display of books , led wall screen of size 8’x12’ with masking & ramp (with operator) p5 – back support connectivity with multi cam setup, usb connectivity and laptop for insertion for av’s and tv’s, sound system and stage fold back speakers of 600 watts(2), sound mixing console and cables with wires and two power points (at the location decided by the officer-in-charge) for relay of live programme. , led screen (52 inch) — (the bazel 10m with stand and back support connectivity with multicam setup, usb connectivity and laptop for insertion for av’s & tv’s, sound system & stage fold back speakers, sound mixing console, cables with wires and 5 power points , providing of labours for routine miscellaneous work from 10:00 a.m. to 9:00 p.m. (rate may be given on per day basis) , halogen led lights of 150 watt with adjustable beam and angle complete with sufficient lighting and necessary wiring , 5 watt led coloured / decorative bulbs , silent generator set: the generator should be in operational condition one day before start of the book fair and till the conclusion of the fair. a) one 125 kva generator set (with fuel and operator) for full duration b) one 62 kva generator set (with fuel and operator) for full duration , main line connection for total job from electric and generator set sources and providing a line for connection inside the stalls of participants, illumination of main gate and toilet, area of the exhibition ground and any other area of the ground, if required with proper and sufficient supply. it shall be the duty of the contractor to get the temporary electric connection for the fair at his own cost one day before start of the book fair. the contractor shall arrange installation of the connection, tendering of security deposit etc., to government authorities at his own cost. only actual consumption charges will be reimbursed –to contractor by nbt on production of original bill by the contractor. in case of any problem for getting electric connection, it shall be the sole responsibility of the contractor to provide adequate supply through hiring more generators at his own cost one day before start of the book fair and no extra payment shall be given to contractor for hiring and providing such extra generator, if any. note : 1. providing power connection of various connected rating from switch board in various stands and with suitable size of cooper/aluminum 3½ /4 core armoured cable and earth wire controlled with suitable capacity switchgear such as ictpn, icspn/mcb i/c end termination laying of cable in floor, trench, carpets and tapping with power supply from permanent db of the ground i/c connections interconnection and maintenance during the fair period. (the cables and other wiring needs to be put under the wooden ramps/rubber covering mat etc. under the carpet on ground floor. 2. only one time payment as quoted by the tenderer will be made in case of any increase or decrease in number of stalls. , street light iron poles (20’x2-½’’) with 4 led halogen light each of 100 watt on each pole , photography per day basis (for 6 days) (photographs should be provided in the hard disk and pen drive after the book fair). 200 photographs of inauguration and other important programs are required in high resolution in coffee table album form in consultation with officer in-charge. • rate for per unit cost for 6 days (press conference + book fair) may be quoted in the financial bid/boq. • specifications for 01 unit: dslr full frame hd 4k camera with 3 cameras with photographer with each camera for 6 days. • photography + cameras would be as per onsite requirement and as per the directions of the officer in-charge. , gimbal videography per day basis (for 6 days) (all programs should be provided in hd format and high resolution. the same should be provided in hard disk & pen drive after the book fair) along with 20 minute short documentary of the programs. • rate for per unit cost for 6 days (press conference + book fair) may be quoted in the financial bid/boq. • specifications for 01 unit: 3 full hd video cameras setup with sdi output with 3 videographers with each camera for 6 days. • videography + cameras would be as per onsite requirement and as per the directions of the officer in-charge. note: provision of a professional digital video multi-camera setup for domestic book fairs, featuring broadcast-quality 1080p full hd (sdi format) production. the system includes: • three (3) full hd professional cameras with sdi output • online digital editing and production table • digital video mixer/switcher for live production • audio talkback communication system • professional audio mixer and sound equipment • on-site editing facilities • skilled technical crew, including camera operators and production personnel. this setup ensures high-quality live recording, switching, and editing suitable for professional broadcasting and online streaming requirements. , one drone camera with operator for videography of the event on day-to-day basis with on-site permission and security clearance (all coverages should be provided in hd format and high resolution. the same should be provided in hard disk & pen drive after the book fair). • rate for per unit cost for 6 days (press conference + book fair) may be quoted in the financial bid/boq. • specifications: hd format and high resolution would be as per onsite requirement and as per the directions of the officer in-charge , live streaming on social media channels with social media team of 2 members (youtube & facebook) from two locations and on digital screens as per requirement , cctv cameras with live telecast on screen (led 52”) with complete installation with a control room access note: complete footage/recording for entire event must be provided after the event to nbt in hard drive & pen drive (rates may be given for full duration) , refreshment packets 250 each per day for children/students (each packet contains – one packet of good day biscuit, one packet of britannia fruit cake, one packet of lays chips & one packet of fruity/real juice/maaza/slice , hiring of taxi (swift dzire) minimum 80 km and 12 hours duty , hiring of taxi (innova) minimum 80 km and 12 hours duty , indian flag (khadi cloth) with mounting on pole (20 feet height) with 100 watt led (4 nos.) halogen light to be focused from bottom to top , acrylic words installation with wooden base covered with cloth , thematic installation / sculpture with complete set-up: each sculpture is to be made and placed on laminated printed carpeted platform (double plywood platform/wooden platform on iron frame with laminated carpet) at ideal height as per the size and design approved in the presentation and will consist the following items: i) 4-5 parco lights ii) cloth for masking the platform from all sides iii) 5-6 queue manager , lunch/dinner (veg. thaali) on per day basis during the book fair (rates may be quoted for one thali) , lunch/dinner (veg. thaali) on per day basis during the book fair (rates may be quoted for one thali)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Ladakh View Result →
47.
Heavy Industries and Public Enterprises #11126933 AOC
Bids Are invited for Sitc Of Boundary Layer Microphone , Sitc Of 2-Way Ceiling Mount Loudspeaker , Sitc Of 2 Channel Amplifier , Sitc Of 8 Channel Digital Signal Processor , Sitc Of 10 Inch Touch Controler With Flip Cover , Sitc Of Network Audio Expander , Sitc Of 98 Inch Interactive Panel With I7 Ops With Keyboard Mouse , Sitc Of 43 Inch Led Screen , Sitc Of Metal Floor Stand , Sitc Of 12X Ptz Camera , Sitc Of 15.6 Inch Pen Display With Adjustable Stand , Sitc Of 4X4 Matrix Switch With Audio De Embedder , Sitc Of Transmeter And Receiver , Sitc Of Cable Manager , Sitc Of Av Rack , Sitc Of All Required Cable And Connectors For Conference Room , Sitc Of Boundary Layer Microphone , Sitc Of 2 Way Ceiling Mount Loudspeaker , Sitc Of 2 Channel Amplifier , Sitc Of 8 Channel Digital Signal Processor , Sitc Of 10 Inch Touch Controler With Flip Cover , Sitc Of 12X Ptz Camera , Sitc Of 1X4 Hdmi Splitter , Sitc Of Cable Manager , Sitc Of Av Rack , Sitc Of All Required Cable And Connectors For Board Room , Sitc Of 55 Inch Digital Signage Standee Total Quantity : 53
Contract Date: Ref. Documents Contract Value : ₹ 36.45 Lakh
Government Departments No of Bidders 5
Delhi View Result →
West Bengal View Result →
49.
Railways #11106027 AOC
Supply Of supply, installation and commissioning , supply, installation and commissioning of 55 inch display unit in pcmm conference hall with following specification : 1) 55 inch display unit : make-lg or similar screen size -55 inch led panel techno logy -ips native resolution -4k ultra hd (3,840 x 2,160) brightness -400nit audio output: low + low impr oved design with slim depth web os-based high performance easy content lvianagement/group manage ment super sign control / cms compatibility digital hdmi 2.0, headphone out dimension without stand: 1, 235 x 715 x 57.5 mm weight: 14 kg warranty -3 years on site comprehensive with. 2) 20 mt hdmi cable 4k supported. 3) supply of wall mount moveable bracket & mounting bracket. 4) casing pati and installation and testing and fixing of unit as required. 5) splitter 1 input to 4 output hdmi 4k supported (quantity only 01 number for all 3 sets). ]
Contract Date: May 18, 2026 Contract Value : ₹ 2.33 Lakh
Government Departments No of Bidders 1
Maharashtra View Result →
50.
Communications and Information Technology  #11104520 AOC
Tender For supply installation testing and commissioning Of It Infrastructural Items, Cctv Surveillance System, Epabx And Voice N/W, Audio Visual Solution For The Conference And Training Room At Igr Office, In The Stp-Ii.- 1 Description 2 SITC of IP 4MP IR Bullet Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 3 SITC of IP 4MP IR Dome Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264 /MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site).Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 4 SITC of 16 Channel IP 4K NVR having minimum technical specification: Video Input: 32 Channel IP Fully Featured NVR; Audio Iuput/Output: 1 Channel Input/2 Channel Outputs, RCA; Display Interface: 2 HDMI (1 HDMI up to 3840 × 2160); 2 VGA; Display Split: 1/4/8/9/16/25/36/64; OSD: Camera title; Time; Video loss; Camera lock; Motion detection; Recording; Compression: H.265/H.264/MJPEG/MPEG4; Resolution: 12 MP (4000 × 3000); 8 MP (3840 × 2160); 6 MP (3072 × 2048); 5 MP (2560 × 1920); 4 MP (2560 × 1440); 3 MP (2048 × 1520); 1080p (1920 × 1080); 720p (1280 × 720); D1 (704 × 576 / 704 × 480); CIF (352 × 288 / 352 × 240); Frame Rate: 1–15 fps (12 MP and 8 MP); 1–25/30 fps (rest of the resolutions); Record Bit Rate: 256Mbps or 200Mbps(when RAID is enabled); Bit Rate: 16 kbps ~ 20 Mbps, per channel; Network Throughput: Input 256Mbps or 200Mbps (when RAID is enabled); Output 256Mbps or 200Mbps (when RAID is enabled); Cascading: Built-in CMS to Monitor and Manage Multiple Matrix NVRs; ONVIF and Major Camera Brands Support; Usb Port: 4; RS232: 1 port (for PC communications and keyboard). Temperature: -10 ºC ~ +55 ºC; REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Wireless Bluetooth Multi Device Keyboard and Mouse. Centralised VMS perpetual license.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 5 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D- LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 350cd/m^2 or nits or higher, Contrast Ratio (Static): 1100:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 6 SITC of Hard Disk .Spec Surveillance Grade HDD of minimum 7200 rpm for storage 8TB storage capacity.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 7 SITC of: Business Communication System with all necessary power accessories: EPBAX system with line: 4 Trunk, 8 Digital & 48 Line Analog Extensions, Expendable up to 96 Analog Extensions with all necessary power accessories; Other Faetures: Hotline, Live Call Supervision, Auto Call Back, Automatic Call, Disconnector, Auto Redial,Call Splitting, Call Conference, Direct Inward Dialing, External Call Forwarding, Executive/ Secretary etc. 8 SITC of Digital Telephone Set 9 SITC of Analog CLI Telephone Set. 10 SITC of: 5 pair Un-armoured Telephone Cable {0.5mm.Dia (Minimum)} 11 SITC of: 200 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete WITH ALL ACCESSORIES. 12 SITC & Laying of PVC conduits(ISI marked) laying through surface with all accessories as required FOR THE ENTIRE SYSTEM WITH ALL OEM ACCESSORIES. (Quality: MMS; Ø=25mm) Quality : ISI, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 13 SITC of ceiling speaker 2 Way, Acoustic Suspension ceiling mount speakers with superior sound quality. Components: LF: 8cone driver; HF: 1 soft dome; Frequency range (-10dB): 55Hz - 20kHz; Nominal coverage: H x V: 100° conical; Power rating: 180W PGM; Transformer taps: 60W, 30W, 15W @ 100V; Sensitivity (1W; 1m on axis): 90dB SPL; Peak: 116dB SPL; Certificate: CE, RoHS; Color- White. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 14 SITC of Multichannel Power Amplifier Output power : 1kHz (THD +N=1%: 4Ω/8Ω) 140W x 4 , Frequency response : 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) , S/N ratio : ≥ 100dB(A-weighted) , Crosstalk : ≤ -60dB. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 15 SITC of column array speaker Full-range, Bass reflex type slim line array/ column array speaker with 8 x 1.5” Cone; Frequency range (- 10dB): 81 Hz – 20 kHz; Nominal coverage: H x V: 170° x 25° - 30°; Power rating: 160 W PGM; Sensitivity (1W; 1m on axis): 91 dB SPL; Peak: 116 dB SPL. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 16 SITC of Multichannel Power Amplifier Output power 1kHz Non-clip 20msec Burst Both channels driven 300W x 2 @ 8Ω & 2Ω and 500W @ 4Ω; Sampling frequency rate: 48kHz; A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling; THD: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power); Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz); Input impedance: 20kΩ (Balance), 10kΩ (Unbalance); I/O Connectors: Speaker output: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4 PHONE(TS) x2; Line Input: XLR-3-31 x2, 1/4 PHONE(TRS) x2; Inbuilt Load protection, Amplifier protection & Power supply protection. 17 SITC of Digital Signal Processor Sampling frequency rate Internal 48kHz/44.1kHz ; Signal delay : 1.9 msec (AD-DA @48kHz), Total harmonic distortion : “0.05% (+4dBu, Gain:-6dB, 48kHz) 0.1% (+4dBu, Gain: +66dB, 48kHz)” (Measured with a 18dB/Oct filter @80kHz) ; YDIF In YDIF RS-422 16IN RJ45 , YDIF Out YDIF RS-422 16OUT RJ45 ; GPI 16IN / 8OUT IN 0V-5V,(IN 16 L(0V-2.5V)/H(2.5V-24V)), Output channel functions : Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter, AEC. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 18 SITC of Digital Control panel 1 Volume & 4 Switch equipped Wall Mounut Control panel for DSP ; Easy connection by CAT5 carrying RS485 + power.Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 19 SITC of Ceiling Microphone Frequency response: 160Hz – 16kHz(- 10dB) or better; Sampling Rate: 48kHz; Bit depth: 24bit; Latency: 60 [ms] (including signal processing) or lower; Audio I/O Dante: 1in x 2out, In1=AEC reference signal／Out1=output of beam mix, Out2= output of beam mix (simple processed); Maximum input level of SPL: 117.8 dB SPL; Self Noise: -0.8 dBA SPL; SNR(Ref. 94 dB SPL at 1 kHz): 94.8 dBA; Sensitivity: -23.8 dBFS/Pa; Dynamic Range: 118.6 dBA; Signal Processing: Multi beam tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain; Power requirements: PoE(IEEE 802.3af), DC 48V; Indicator: Front Indicator(Mute/Unmute & Status) ・Network Port Indicator. (Ceiling Mic & DSP Should be from Same OEM) . Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 20 SITC of L2 Switch for stable operation of a Dante network with Standard IEEE 802.3 (10BASE-T/100BASE-TX/1000BASE-T); Number of ports: 10 Ports; Communication mode: Auto negotiation; Connector type: RJ-45; LAN ports: IEEE 802.3 (1000BASE-T) 2 ports; 8 ports (1-8) PoE Power Supply; PoE Standards: IEEE 802.3at; Max power supply per port: 30 W. 21 SITC of FHD 20x PTZ camera 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be CE, FCC, RoHS & BIS Certified. Warranty: 03 (Three) onsite comprehensive OEM warranty with parts and service. 22 SITC of 86 UHD LED Interactive Display 86, 4K Multi touch interactive display, 450 cd/m2 Panel Technology- IPS, ,Android Pie 11.0, 8 GB Memory, 128 GB storage, Built in Wifi & Bluetooth, 2x20 W - Front Facing Speakers, Continuous Touch Points: 40 Points: Windows,10 Points: Android. Rear port terminals: 4 x HDMI IN, 1 x VGA, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x Micro SD, 1 x secure slot (USB 2.0), 1 x OPS slot (15W), 1 x HDMI Out, 1 x RJ45. Front Port Terminals: 2 x USB2.0 Type-A, 1 x USB2.0 Type-B for touch, 1 x HDMI2.0 Input, Capability to connect & disconnect all devices / group of devices from central location. Application have capability to share and finish casting of BYOD device and have a robust authorization management. Power off & Reboot devices from central location also control external devices such as USB cameras, Speakers, control brightness & clear cache. Device active trend and deactive displays, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, 24x7 operation, with OPS i5, 8GB RAM, 256GB SSD. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 23 SITC of 32 HD Display 32 FHD Ready resolution Android LED display Brightness-500 Nits, Operating Hours- 24x7,with built in 2.4 Ghz Wifi, 1 Ghz Built in Quad core processor, 1.5 GB DDR3 RAM, 8 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, , 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1. 24 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 25 SITC of Wireless Presenter Operating system Windows 10 and higher macOS 11 (BigSur) and higher Android v9 and higher; Video outputs 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-C DisplayPort 1.2 (only Gen2); USB: 1 X USB-A, 1 X USB-C ClickShare Buttons 2, Desktop & Mobile Native protocols: Airplay, Google Cast, Miracast* Maximum number of simultaneous connections (with Buttons and/or App): 32; Noise Level: Max. 25dBA @ 0-30°C Max. 30dBA @ 30-40°C Authentication protocol WPA2-PSK in stand alone mode WPA2-PSK or IEEE 802.1X, Wireless transmission protocol IEEE 802.11 a/g/n/ac and IEEE 802.15.1; Reach: Adjustable with signal strength modulation; max. 30m (100 ft),Frequency band: 2.4 GHZ and 5 GHz. including 2 additional buttons. 26 SITC of 1.5 sq mm Speaker Wire: 27 SITC of CAT6 Cable: 28 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 29 SITC of AUDIO Cable 30 SITC of 10 mtr USB Cable 31 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 32 SITC of Connectors & Interconnects 33 Mics - installation accessories 34 SITC of Digital Podium with 20 or bigger touch display & gooseneck microphone All-in-one Podium with Podium body made from 1.5mm thick CRCA steel, duly powder coated, with security lock cover for Touch display max size 24 Diagonal. With Keyboard tray housing, Mouse, Drawer for doc cam, space for keeping extra laptop/tablet, Gooseneck mic with switch, W/o Central Controller, 360 degree heavy duty movable castor, Open from Front & Back for easy installation, Adjustable Rack, Ample ventilation.Multimedia Controller with Control out put, Multiple input & switchable output. Warranty: 01 (ONE) years onsite comprehensive OEM warranty with parts and service. 35 SITC of Wall Speaker SITC of Wall Mount Speaker with all necessary accessories, having minimum technical specification: System Type: Full range, Acoustic suspension; Components: 3.5 full range; Frequency Range (-10dB): 130Hz-20kHz; Coverage Angle (Horizontal x Vertical): 150° x 160°; Nominal Impedance: 8Ω; Power Rating: 40W; Sensitivity (1W, 1m): 86dB SPL; Maximum SPL (Caluculated, 1m): 105dB SPL; Connectors: 1x Euroblock (4P) (Input: +/-, Loop Thru:+/-); Material, Finish, Color: Black, White; Accessories: Owners Manual, Retaining knob, Terminal cover screw, Wall / Ceiling mount bracket, Terminal cover. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 36 SITC of Mixer Amplifier Output Power : 120W x 2 (20ms Burst) ; Total harmonic distortion : ≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W) ; Crosstalk : ≤ -70dB (MIC/LINE input to other MIC/LINE input) ; Mic/Line Input : Input 1-6: 3.5mm Euroblock (6-pin, balanced) x 3. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 37 SITC of 65 4K display: 65 4K UHD (3840x2160 Ready resolution , Brightness-350 Nits, Operating Hours- 24x7,Built in Android OS LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , Haze-28%, RS232CX1. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 38 SITC of 43 4K UHD (3840x2160) Display Supply, Installation, Testing and Commissioning of 43 4K UHD (3840x2160) Ready resolution Built in Android OS LED display with brightness- 500 Nits, Operating Hours 24x7, built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1, Haze-28%. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 39 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 40 SITC of Wireless Lapel Mic: 24 MHz bandwidth 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal-to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 41 SITC of Wireless Handheld Mic 24 MHz bandwidth: 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 42 SITC of Small format PC for Podium with dual HDMI output: 43 SITC of Ceiling/Wall Brackets for Displays 44 SITC of 1.5 sq mm Speaker Cable: 45 SITC of CAT6 Cable: 46 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 47 SITC of AUDIO Cable 48 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 49 SITC of Connectors & Interconnects
Contract Date: May 17, 2026 Contract Value : ₹ 57.09 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
TenderDetail
Loading tenders