View Bid Results For Ash Trays Tenders

We found 449 Bid Results related to ash trays tenders. You can find Contractor details who won ash trays tenders along with contract details in Bid awards announcements section.

Filters
Stage
358
56
35
Tender Publishing Platform
157
292
State / UT
30
86
68
32
31
27
26
25
17
15
14
13
13
10
9
8
6
6
6
6
6
5
4
4
4
2
2
1
1
1
1
Contract Value
158
156
89
44
Publish Date
2
0
0
0
0
Sector
23
153
78
41
38
28
23
14
14
12
10
10
5
5
4
3
2
2
2
1
1
1
1
1
Ownership
6
179
118
89
48
13
2
Within keyword
Active filters:
Showing 1–9 of 449 tenders matching your filters
1.
Agriculture #11504596 Technical Bid
fabrication and erection job (major and general) , fabrication and erection job (major and general) , dismantling, fabrication and erection cane cutter hoods from 8-10mm thick plate with ms angles etc. , dismantling and erection of expansion joint of power turbine exhaust line. , replacement of side plates of cane carrier chain/ rbc and trough of rbc / bagasse elevator/ cross rbc. , replacement of channel and i-beam of rbc/ cane carrier/ bagasse elevator/ cross rbc runner , dismantling, fabrication erection of mill house juice tray of from ms plate , fabrication of screw conveyor of mill house , dismantling, fabrication of trough of screw conveyor (mill house), assembly of screw conveyor with trough & its erection. , dismantling, fabrication erection of ash hopper of boiler (pyjamas) cone with chute bottom portion( cone tapper portion size 15” approximate) , repair of rotary bagasse feeders of boilers 1) body , repair of rotary bagasse feeders of boilers 2) rotor , replacement of side plate 3mm/old ms plate of boiler (with ms plate & supporting angle/ flat) , dismantling, fabrication & erection of worn out ducting of boiler & apcd including angle, channel, flats & flanges , dismantling , fabrication & erection damper of boiler ducting , dismantling, fabrication & erection of expansion joint of boiler ducting (3.360 mtr x 1.260 mtr) , replacement of ms gutter of apcd plant from wet scrubber to ash pits , dismantling fabrication & erection of damper of rotary bagasse feeders , dismantling, fabrication & erection of worn out portion of id and apcd fan casing , dismantling, errection , fitting and commisioning of id fan of boiler no.2 scope of work:- 1) dismantling of existing casing, id fan of boiler and suction cones of id fan , dismantling, errection , fitting and commisioning of id fan of boiler no.2 scope of work:- 2) fitting of new id fan of boiler, casing of id fan and suction cones of id fan , dismantling, errection , fitting and commisioning of id fan of boiler no.2 scope of work:- 3) complete fitting work including sucessful trail of id fan , dismantling, errection , fitting and commisioning of double suction apcd fan scope of work:- 1) dismantling of existing casing, apcd fan of boiler and suction cones of apcd fan , dismantling, errection , fitting and commisioning of double suction apcd fan scope of work:- 2) fitting of new id fan of boiler, casing of id fan and suction cones of apcd fan , dismantling, errection , fitting and commisioning of double suction apcd fan scope of work:- 3) complete fitting work including sucessful trail of apcd fan , replacement of sieve plates of apcd scrubber. this job also includes 10/12 mm holes (324 holes per square ft.)drilling in plates. , baffle plates (ms flat 65 x 6mm) of demister in wet scrubber , repair/ replacement of wornout portion of wet scrubber of boiler no. 1 & 2 , dismantling fabrication and erection of receiving tank/ sum tank/ sealing tank of wet scrubber. , replacement of worn-out of m.s. runner of inter carrier, elevator, rbc , cross carrier & cane carrier chains , dismantling, shifting and erection of complete calendria of 4th body of evaporator. scope of work: a) complete dismantling of exiting calendria assembly of 4th body evaporator including all connections, piping support fittings and accessories as required b) dismantling of bottom cone and re-erection of the same after fitting of complete calendria. c) shifting, positioning alignment and erection of new fabricated complete calendria assembly at its place along with all required connections in all respects. d) completion of job in all respects ensuring proper alignment, leak proof operation and readiness for commissioning. , dismantling, fabrication and erection of mix juice eceiving tank having round bottom with 8.00mm thick ms plate. ( size of tank - dia -2000mm x height -1100mm, approx) in this work also includes providing of adequate ms angle/ channels. , strengthening of evaporator shell channels in round shape with ms channels100x40mm and dia 2.80 mtr. (3 rounds). , dismantling, fabrication, erection of top cone below save all of evaporators. , dismantling, fabrication, erection of complete save all of evaporators including top plate, inner and outer shell (as per existing design). , dismantling, fabrication, erection of umbrella of save all of evaporator 2nd, 3rd& 4th body as per existing design including all supporting. , dismantling, fabrication, erection of hot water weighing tank of water weighing scale. size dia 1.6 mtr x 1.5 height x cone 1 mtr length .the erection work for this job will also include all connections which are dismantled during dismantling. , dismantling, fabrication, erection of mix juice weighing tank of juice weighing scale having conical bottom. size dia 2 mtr x 1.5mtr height x cone 1 mtr length .the erection work for this job will also include all connections which are dismantled during dismantling. , dismantling, fabrication & erection of juice feed boxes of juice heater double bead valve. the erection work for this job will also include all respective connections which are dismantled during job. , dismantling, fabrication & erection of absorption tower of juice sulphiter along with its bottom cone and its man hole. the erection work for this job will also include all respective connections . , dismantling, fabrication & erection of worn out stainer of mix juice tank/ sulphited juice tank / syrup tank. size of tank 600mm x 800mm , dismantling, fabrication and erection of the sulphur furnace with existing design (by 25/20 mm ms plate).this work include dismantling and erection of all connections, man hole, flanges etc.burning area- 0.8m² , dismantling, fabrication and erection of cooling jackets of so2 gas line of sulphur furnace along with its flange, water inlet/ outlet connections. , dismantling, fabrication and erection of ms melter of sulphur furnace as per existing design. this work include dismantling and erection of all connections, man hole, flanges etc. size- 600mm x 400mm , dismantling, fabrication and erection of scrubber of sulphur furnace as per existing design. this work include dismantling and erection of all connections, man hole, flanges etc .size 1000mm x 1600mm , dismantling, fabrication & erection of dorr coils (nipple/flange/ reducer rates as per general fabrication, erection rates ) , dismantling, fabrication & erection of dorr compartment shell with ms plate 8mm, channel &angles. the erection work for this job will also include all connections which are dismantled during dismantling. , dismantling, fabrication & erection of clear juice sump including all related connections in all respects , dismantling, fabrication& erection of dorr compartment/chamber roof with ms plate 8mm, channel with angles supports. the erection work for this job will also include all connections which are dismantled during this job. , dismantling, fabrication and erection of worn out heavy / light vacuum tank of rvf including all connections along with its cone and top cover. size – 700mm x 1300mm , dismantling, fabrication & erection of filter juice sealing bottles of receiving pit for vacuum filter. the erection work for this job will also include all connections which are dismantled during dismantling. size – 1300mm x 3000mm , dismantling fabrication and erection of filtrate juice self-priming tanks for filtrate juice pumps. the erection work for this job will also include all connections which are dismantled during this job. size – 550mm x 1300mm , dismantling, fabrication and erection of barometric condenser of rvf as per existing design, including all respective connections and its cone. , dismantling fabrication and erection of bagacillo pipeline from ms plate 3mm. (above 15 meter height from ground floor approx ) , dismantling, fabrication & erection of bottom trough of rvf (size – 8’ x 16’) , dismantling, fabrication and erection of bagacillo cyclone from 4.00mm ms plate as per exiting design. in this work include all required connections in all respect. , dismantling, fabrication and erection of mud mixer trough side plate as per existing size , dismantling, fabrication & erection of mud mixer trough. size – length 3300mm x width 700mm , dismantling , fabrication and erection of worn out portion of mud mixture with ms plate , dismantling, fabrication and erection of complete syrup sulphiter body with 10mm ms plate including all internal partitions, fabrication and erection of ms screens, providing required supporting by ms angle/ channels, fabrication & erection of exiting man holes etc as per exiting design.this work includes all required connection, fabrication of cones etc in all respect. , dismantling , fabrication and erection of sulphited syrup receiving tank with 8/10 mm ms plate including inlet and out let connections along with fabrication of internal steps as per exiting size and design. , dismantling, fabrication and erection of top ms plate of pan with supporting ribs(as per existing design). , strengthening of pans shell with angle and channels in round shape with ms angle 75x75mm and dia 4.34 mtr. (3 rounds) , dismantling, fabrication, erection of worn out portion of pan body shell with supports in all respect. , dismantling, fabrication, erection of steam washing coil inside the pan(each) , dismantling, fabrication and erection of outer shell of save all for pan including vapor pipe connection and man hole . , dismantling , fabrication and erection of worn out portion of a seed/grain crystallizers at pan station including all relative connections , dismantling, fabrication and erection of worn out side plate and bottom plate of hot water and cold water overhead tanks at pan station with suitable ms plate , supporting channels and angles along with dismantling and erection of all relative connections , dismantling & erection of ss multijet condenser of pans this work also includes dismantling and erection of respective tail pipe, cone etc. along with other necessary connections of 40ton capacity pan. , dismantling and erection of semi kestner vapour valve of pans. scope of work 1. dismantling of existing 450 mm semi kestners vapour sluice valve of pans. 2. erection of globe valves att its place in all respect. 3. for erection of globe valves required arrangement as like erection of required reducers, fittings of flanges, rubber sheet, providing joint sheets and other necessary fitting. , dismantling, fabrication and errection of vapour entry tee (connection pipe) size dia 18” alongwith fitting work of valves. , dismantling of ms/ci condenser cone of pans , fabrication of ms condenser cone of pans , erection of ms condenser cone of pans , dismantling, fabrication, erection of umbrellas of pan save all as per existing design including all supporting. , replacement of wornout portion of bottom, side plate & supporting angle/channel of syrup and molasses tank at pan station. , replacement of worn out portion of pan saucer. , dismantling, fabrication and erection of downtake of pan from 10/12mm plate. , dismantling, fabrication and erection of feed box of pans including all connections. , dismantling, fabrication and erection distributor of pans. , dismantling, fabrication and erection of worn out portion of b/c-vacuum crystallizer including all connections , fabrication and erection of new syrup/ molasses tank from ms plate at pan station including all connections. , dismantling, fabrication and erection of ammonia coils of pans from ms pipe dia3” including all connection , dismantling, fabrication and erection of worn out bottom portion of massecuite crystallizer , replacement of crystallizer arms along with supports from 75x75mm m.s angle. (1)dismantling. (2) fabrication. (3) erection. , dismantling, fabrication & erection of water cooling coils 3” of crystallizer including all connections. , dismantling, fabrication erection of worn out portion of b/c magma mixture with 8mm thick plate including all connections. , dismantling, fabrication and erection of worn out portion of a/b pug mill with 8mm thick plate including all connections. , dismantling, fabrication and erection of worn out a-magma mixture complete including all connections. , dismantling, fabrication and erection of sugar melter pump stainer including all connections. size dia 600 x l 700mm , fabrication and erection of bed for pump and motor of magma mixture along with suction and delivery pipe line connections, alignment of motor with pump etc. , dismantling, fabrication and erection of bottom discharge chute of continuous centrifugal machine , fabrication and erection of top cover of continuous type centrifugal machines with all connections & feed pipe in all respect. , fabrication and erection of top cover of batch type centrifugal machines with all connections & feed pipe in all respect. , dismantling and erection of crystallizer shaft including arms and all connections, fittings. , dismantling, errection and commissioning of hollow shaft of water cooled massecuite crystallizers including all connected, connection water coils which are dismantled during this job. , dismantling , fabrication , erection and successful commissioning of brown sugar magma in all respect along with all respective connections ,shaft , arms and motor-reduction gear box etc , dismantling fabrication and erection of complete cfw centrifugal machine’s magma mixture . this work includes dismantling and erection of its shaft, arms , gear and all relative equipment. , dismantling, fabrication and erection of complete sugar melter tank as per existing design. this work includes dismantling and erection of its stirrers shaft, arms , drive , gear , motor and steam coils . , dismantling and erection of complete super heated wash water (shww) pipe line system from super heater to all batch type machines (behind the machines) with adequate ms pipe lines. in this work includes all related connections, nipples, valves, reducers in all respect. , replacement of worn out m.s. vertical supporting channels & side plate of final molasses storage tank with m.s plate and channels. , dismantling, fabrication, erection of stirrer(fan) of aeration tank at etp as per existing design including complete commissioning and successful trial , dismantling, fabrication and erection of ms vapour pipe of different sizes. 1) dia- 1050mm , dismantling, fabrication and erection of ms vapour pipe of different sizes. 2) dia - 900mm , , dismantling, fabrication and erection of ms vapour pipe of different sizes. 3) dia - 720mm , dismantling, fabrication and erection of ms vapour pipe of different sizes. 4) dia – 620mm , dismantling, fabrication and erection of ms vapour pipe of different sizes. 5) dia – 520mm , dismantling, fabrication and erection of ms vapour pipe of different sizes. 6) dia – 420mm , dismantling, fabrication & erection vapour/exhaust pipe bend 1020 mm dia , dismantling, fabrication & erection vapour/exhaust pipe bend 900mm dia , dismantling, fabrication & erection vapour/exhaust pipe bend 720mm dia , dismantling, fabrication & erection vapour/exhaust pipe bend 620mm dia , dismantling, fabrication & erection vapour/exhaust pipe bend 520mm dia , dismantling, fabrication & erection vapour/exhaust pipe bend 420mm dia , dismantling, fabrication and erection of distance piece of ms vapour pipe length up to 1.5 mtr. 1) dia- 1050mm , dismantling, fabrication and erection of distance piece of ms vapour pipe length up to 1.5 mtr. 2) dia - 900mm , , dismantling, fabrication and erection of distance piece of ms vapour pipe length up to 1.5 mtr. 3) dia - 720mm , dismantling, fabrication and erection of distance piece of ms vapour pipe length up to 1.5 mtr. 4) dia – 620mm , dismantling, fabrication and erection of distance piece of ms vapour pipe length up to 1.5 mtr. 5) dia – 520mm , dismantling, fabrication and erection of distance piece of ms vapour pipe length up to 1.5 mtr. 6) dia – 420mm , replacement of m.s plate gutter of crystallizer station and other factory units. , dismantling and erection of ms branch pipes of spray pond. this work includes all connections of clusters. , dismantling, fabrication & erection of injection header dia 600 mm, plate size -8mm with all connections as existing & in all respect. , dismantling of ci/ms main pipeline spray pond , dismantling fabrication & erection of suction pipes of injection pumps with stainer. , dismantling fabrication & erection of suction pipes of spray pumps with stainer. , fabrication and erection of beds for pump and motor etc. , replacement of g.i sheet gutter of factory building , juice heater/v.l.j.h. ss tubes 1) dismantling , juice heater/v.l.j.h. ss tubes 2) fitting , semi kestner ss tubes 1) dismantling , semi kestner ss tubes 2) fitting , quad bodies ss tubes quad 1st to 4th 1) dismantling , quad bodies ss tubes quad 1st to 4th 2) fitting , pans ss/brass tubes pan 1st to 5th 1) dismantling , pans ss/brass tubes pan 1st to 5th 2) fittings , welding joints of water, juice, vapor and exhaust pipe line of exhaust pipe lines of all sizes. , ms pipe line 1/2 to 12” dia 1) dismantling , ms pipe line 1/2 to 12” dia 2) erection , ss pipe line 1/2 to 12” dia 1) dismantling , ss pipe line 1/2 to 12” dia 2) erection , ci pipe line 1/2 to 12” dia 1) dismantling , ci pipe line 1/2 to 12” dia 2) erection , ci pipe line above 12” dia 1) dismantling , ci pipe line above 12” dia 2) erection , ms pipe line above 12” dia from ms plate (other than vapour pipe of pan and quad) 1) dismantling , ms pipe line above 12” dia from ms plate (other than vapour pipe of pan and quad) 2) fabrication , ms pipe line above 12” dia from ms plate (other than vapour pipe of pan and quad) 3) erection , ms bend upto 12” dia 1) dismantling , ms bend upto 12” dia 2) fabrication , ms bend upto 12” dia 3) erection , ms bend above 12” dia from ms plate (other than v.p. pans & quad) 1) dismantling , ms bend above 12” dia from ms plate (other than v.p. pans & quad) 2) fabrication , ms bend above 12” dia from ms plate (other than v.p. pans & quad) 3) erection , ci bends sizes 1” to 12” 1)dismantling , ci bends sizes 1” to 12” 2) erection , dismantling, fabrication& erection of m.s (all sizes) 1) tee, , dismantling, fabrication& erection of m.s (all sizes) 2) nipples, , dismantling, fabrication& erection of m.s (all sizes) 3) crosses , dismantling, fabrication& erection of m.s (all sizes) 4) reducers , dismantling, fabrication& erection of m.s (all sizes) 5) elbow , dismantling, fabrication& erection of s.s (all sizes) 1) tee, , dismantling, fabrication& erection of s.s (all sizes) 2) nipples, , dismantling, fabrication& erection of s.s (all sizes) 3) crosses , dismantling, fabrication& erection of s.s (all sizes) 4) reducers , dismantling, fabrication& erection of s.s (all sizes) 5) flange , dismantling, fabrication& erection of s.s (all sizes) 6) elbow , dismantling, fabrication& erection of s.s (all sizes) 7) bend , replacement of wornout ms cone (all sizes) , ms flanges (all sizes) 1) dismantling , ms flanges (all sizes) 2) fabrication , ms flanges (all sizes) 3) erection , dismantling , fabrication and errection of man holes (all sizes) , 1) dismantling of platform. , 2) fabrication & erection of platform , m.s. tank having round & rectangular bottoms 1) dismantling , m.s. tank having round & rectangular bottoms 2) fabrication , m.s. tank having round & rectangular bottoms 3) erection , m.s. tank having conical bottoms 1) dismantling , m.s. tank having conical bottoms 2) fabrication , m.s. tank having conical bottoms 3) erection , m.s structure trusses, perlins, columns & beams (factory building) 1) dismantling , m.s structure trusses, perlins, columns & beams (factory building) 2) fabrication , m.s structure trusses, perlins, columns & beams (factory building) 3) erection , strengthening/ replacement of l-bracket/support between column and beam of factory building structure , platform railing from old pipe & angle 1) dismantling , platform railing from old pipe & angle 2) erection , electric panel ,db and other machinery shed gi/acc/ms sheet 1)dismantling , electric panel ,db and other machinery shed gi/acc/ms sheet 2) fabrication , electric panel ,db and other machinery shed gi/acc/ms sheet 3) erection , patch work of any part of any equipment with 3mm to 10mm thick plate max. upto 1 sq meter , dismantling of sluice valve/ angle valve/ n.r.v. , erection of sluice valve/ angle valve/ n.r.v. ,butterfly valve , replacement of rail line of cane unloader with 50mm square bar / rail line , dismantling of exiting sugar grader with all accessories. fabrication of required structure and accessories for 4 wide sugar grader brought from csm, patiala. erection and commissioning of four feet wide sugar grader for proper working of the same during the season.
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 3
2.
Health and Family Welfare #11427982 Technical Bid
Tender for E-Tender For Purchase Of Mediciens, Dental Materials, Consumables, Lab Items, Ortho Implants & Other Items For Districit Health Facilities, District Charkhi Dadri. , 5-Fluorouracil Injection 500Mg, 50Mg/Ml Ampule , Acebrophylline 200 Mg Tablet , Aceclofenac Tablet 100 Mg , Acetazolamide Tablet 250 Mg , Acetylcysteine 600Mg Tablet , Acetylcysteine20% W/V, 2Ml Injection , Acetylsalicylic Acid Tablet 150 Mg , Acetylsalicylic Acid Tablet 75 Mg Gastroresistant Entric Coated , Actinomycin Injection 0.5 Mg , Acyclovir Eye Oint 5%,5 Gm , Acyclovir Ointment 3% W/W, 4.5Gm , Acyclovir Tablet 200 Mg , Acyclovir Tablet 400 Mg , Acyclovir Tablet 800 Mg , Adapalene Gel, 0.1%, 15Gm , Adenosine Injection 3 Mg/ Ml, 1Ml annual periodical maintenance , Adrenaline Injection 1 Mg/Ml, 1:1000, 1 Ml annual periodical maintenance , Agomelatine Tab 25 Mg , Albendazole Chewable Tablet 400 Mg , Albendazole Oral Suspension 200 Mg/5 Ml,10 Ml Bottle , Alfacalcidol Soft Gelatin Capsule 0.25 Mcg , Alkalizer Mb6 500Ml (Potassium Citrate Magnisum Citrate Syrup & Vit B6) , Allopurinol Tablet 100 Mg , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Aluminium Hydroxide + Magnesium Hydroxide + Simethicone Oral Solution 250 Mg+ 250 Mg+ 50 Mg/ 5 Ml, 180 Ml Bottle , Aluminium Hydroxide + Magnesium Hydroxide + Simethicone+ Magnesium Carbonate Chewable Tablet 240 Mg+100 Mg+ 25 Mg + 60 Mg , Amidarone 150 Mg/3 Ml Injection , Amikacin Injection 100Mg, 2 Ml , Amikacin Injection 250Mg, 2 Ml , Amikacin Injection 50 Mg, 2 Ml , Amikacin Injection 500Mg, 2Ml , Amino Acids/Alamin 200 Ml Infusion Iv Minimum 10 Essential Amino Acids , Aminophylline Injection 25 Mg/ Ml, 10 Ml Ampoule , Amiodarone 100 Mg Tablet , Amiodarone 200 Mg Tablet , Amisulpride 100 Mg Tablet , Amisulpride 200 Mg Tablet , Amisulpride 50 Mg Tablet , Amitriptyline Tablet 10 Mg , Amitriptyline Tablet 25 Mg , Amlodipine Tablet 10 Mg , Amlodipine Tablet 5 Mg , Amoxicillin + Clavulanic Acid Injection 1.2 Gm , 10 Ml Vial With Diluents , Amoxicillin + Clavulanic Acid Injection 250 Mg +50 Mg, Vial With Diluents , Amoxicillin + Clavulanic Acid Suspension 200 Mg +28.5 Mg/ 5 Ml, 60 Ml Bottle , Amoxicillin + Pottasium Clavulanate Dispersible Tablet 200 Mg +28.5 Mg , Amoxicillin + Pottasium Clavulanate Tablet 500 Mg + 125 Mg , Amoxicillin Capsule 250 Mg , Amoxicillin Oral Suspension 125 Mg/5 Ml, 60 Ml Bottle , Amphotericin B Powder For Injection 50 Mg And Vial Has Sodium Deoxychlolate Or Liposomal Complex, 10 Ml , Ampicillin Sodium Injection 500Mg/2 Ml Vial With Diluent , Anti Hemophillic Factor Ix Vial Injection Size 500 Iu , Anti Hemophillic Factor Vii Injection 1Mg,Vial/Ampoule , Anti Hemophillic Factor Vii Injection 2Mg,Vial/Ampole , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 1000 Iu,Vial/Ampoule , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 500 Iu,Vial/Ampoule , Anti Rabies Immunoglobulin Injection (Human) 150 Iu/Ml, 2Ml Vial , Anti Rabies Immunoglobulin Injection 300Iu/Ml , Anti Rabies Vaccine Human (Cell Culture) Purified Vero Cell Rabies Vaccine 1 Ml Vial, (For Intradermal Use) , Anti Rabies Vaccine Injection 2.5 Iu, Singledose , Anti-Haemorrhoidal Containing: Beclomethasone Dipropionate 0.025% W/W, Phenylephrine Hyderochloride 0.10% W/W, Lignocaine Hydrochloride 2.5% W/W In Soft Paraffin Base 20 Gm Tube , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 150 Mcg/Vial , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 300Mcg/Vial , Antisnake Venom ( Dry Powder For Polyvalent Solution) Injection Vial With 10 Ml Diluent , Antisnake Venom (Polyvalent Solution) Injection 10 Ml , Aprepitant 80Mg (Kit Contains 3 Caps) , Aripipralzole Tablet 10 Mg , Aripiprazole Tablet 20 Mg , Aripiprazole Tablet 5 Mg , Arkamin 0.1 Mg Tablet , Artemether (40Mg) + Lumefantrine (240Mg) Tablet , Artemether (80Mg) + Lumefantrine (480Mg) Tablet , Artesunate 100 Mg+Pyrimethamine 37.5 Mg+Sulphadoxin 750 Mg Tab. , Artesunate 50 Mg+Pyrimethamine 25 Mg+Sulphadoxin 500 Mg Tab. , Artesunate 200 Mg+Pyrimethamine 25 Mg+Sulphadoxin 500 Mg Tab. , Artesunate Injection 60 Mg/Ml , Ascorbic Acid Tablet 500 Mg (Vitamin - C) , Ascorbic Acid Tablet 500 Mg + Zinc Sulphate 20Mg , Atenolol Tablet 50 Mg , Ateplase Inj. 20 Mg , Ateplase Inj. 50Mg , Atomoxetine Capsule 10 Mg , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 20 Mg , Atracurium Besylate Injection 10 Mg/ Ml, 2.5 Ml , Atropine Eye Drops 1% W/V, 5 Ml , Atropine Eye Ointment 1%, 3.5 Gm , Atropine Injection 0.6 Mg/Ml, 1 Ml Ampoule , Azathioprine 25 Mg Tablet , Azithromycin 1Gm Inj. , Azithromycin 500 Mg Inj. , Azithromycin Oral Solution 200 Mg/5 Ml, 15 Ml , Azithromycin Tablet 250 Mg , Azithromycin Tablet 500 Mg , Azitronam 250Mg , B-Complex Tablet , Beclofen Tablet 20 Mg , Benzathine Penicillin Injection (Powder )12 Lacs Iu Vial, 5 Ml , Benzoyl Per Oxide Gel 2.5%, 20 Gm , Benzyl Nicotinate(2 Mg) + Heparin(50 Iu) 20Gm Ointment (Tharomophob Cream) , Betahistine Tablet 8 Mg , Betamethasone Dipropionate Cream 0.1 %, 5 Gm , Betamethasone Injection 4Mg/Ml , Bethanecholchloride Tablet 25 Mg , Bicalutamide Tablet 50 Mg , Biotin Tablet 10 Mg , Biphasic Isophane Insulin (30/70) 40 I.U/Ml, 10 Ml , Bisacodyl Tablet 5 Mg , Bisprolol 5Mg Tablet , Bleomycin Injection 15 Mg, 15 Mg/Ml Vial , Blonanserin Tablet 4 Mg , Bone Marrow Needle For Neonates 18 G , Bortezomib Injection 2 Mg , Breviteracetam Tablet 50 Mg , Bromocriptine Tablet 2.5 Mg , Budesonide (A)+ Formoterol (B) Inhalation (Mdi/Dpi) 200 Mcg (A)+ 6 Mcg (B), 120 Mdi , Budesonide Inhalation (Mdi/Dpi) 200 Mcg/Dose, 200 Mdi , Budesonide Nasal Spray 100 Mcg/Dose, 7.5 Ml , Budesonide Respirator Solution For Use In Nebulizer 1 Mg/ Ml, 2Ml , Budesonide Respules 3%, 4Ml , Bupivacaine Heavy 5 Mg With Dextrose Monohydrate 80 Mg/Ml Injection 4 Ml Ampoule , Bupivacaine Injection 0.5%, 5Ml Amp. , Buprenorphine Tablet 0.4 Mg , Buprenorphine Tablet 2 Mg , Buprenorphine Transdermal Patch 10 Mcg/Hour , Buprenorphine Transdermal Patch 20 Mcg/Hour , Buprinorphine Patch 10 Mg , Buprinorphine Patch 15 Mg , Buprinorphine Patch 5 Mg , Bupropion Tablet 150 Mg , Buspirone 5 Mg Tablet , Butorphanol Tartrate 1Mg/Ml, 1 Ml Injection , Cabergolin 0.25 Mg Tab , Cabergolin 0.50 Mg Tab , Caffeine Citrate 20Mg/Ml Oral Solution , Caffeine Citrate Injection 20 Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml), 3Ml , Calamine Lotion, 100 Ml , Calcium Gluconate Injection 100 Mg/Ml, 10 Ml annual periodical maintenance , Calcium Phosphate Syrup, 200Ml , Calcium Salts 500 Mg+ Vitamin D3 250 Iu Tablet , Calcium Syrup Each 5 Ml Contains Calcium 250Mg, Vitamin D3 125 Iu , Capecitabine Tablet 1000 Mg , Capecitabine Tablet 500 Mg , Carbamazepine Oral Solution 100Mg/5Ml, 30 Ml Bottle , Carbamazepine Tablet 200 Mg , Carbamazepine Tablet 400 Mg , Carbimazole Tablet 5 Mg , Carbimiazole 10 Mg Tablet , Carboplatin Injection 150 Mg, 10 Mg/Ml Vial , Carboplatin Injection 450 Mg, 10Mg/Ml Vial , Carboprost Injection 25 Mg/Ml , 250 Mcg, 1Ml , Carfilzomib Injection 60 Mg , Cariprazine Tablet 1.5 Mg , Carpinol Inj. 0.5% , Carvedilol 3.125 Mg Tablet , Cefadroxil Oral Solution 125 Mg/ 5 Ml, 30 Ml , Cefepime 2 Gm + Tazobactom 250Mg Inj. , Cefixime 100 Mg Tablet , Cefixime Syrup 50 Mg/ 5 Ml, 30 Ml , Cefixime Tablet 200 Mg , Cefoperazone + Sulbactam (1G+1G) Injection , Cefotaxime Injection 1 Gm , Cefotaxime Injection 250 Mg , Cefotaxime Injection 500 Mg , Ceftazidime 1 Gm Injection , Ceftazidime 250Mg , Ceftriaxone + Salbuctam Injection (1Gm + 0.5Gm) , Ceftriaxone Injection 1 G Vial , Ceftriaxone Injection 250 Mg , Cetrimide Solution 20% concrete For Dilution 500Ml , Cetrizine Hydrochloride 10 Mg Tablet , Cetrizine Syrup 5 Mg/5Ml, 60 Ml , Chlordiazepoxide 10 Mg Tablet , Chlordiazepoxide 25 Mg Tablet , Chlorhexidine Mouth Wash Solution 100 Ml, 0.2% W/V , Chlorhexidine Solution 5% concrete For Dilution 5 Ltr , Chlorhexidine Solution 5% concrete For Dilution 500Ml , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Oral Solution 50 Mg/ 5 Ml, 50Ml Bottle , Chloroquine Phosphate Tablet 250 Mg Equivalent To 155Mg Chloroquine Base , Chlorpheniramine Tablet 4 Mg , Chlorpromazine (Hydrochloride) Tablet 100 Mg , Chlorthlidone 12.5 Mg Tablet , Chlorthlidone 6.25Mg Tablet , Chymotrypsin+ Trypsin (1:6 ) Tablet 100K Au , Cilnidipine 10Mg Tablet , Cinnarizine Tablet 25 Mg , Ciprofloxacin (0.3% W/V) + Dexamethasone (0.1% W/V) Ear Drops, 10 Ml , Ciprofloxacin Eye Drop 0.3%, 10Ml , Ciprofloxacin Eye Ointment 0.3%, 5 Gm , Ciprofloxacin Injection Iv 2Mg/ Ml, 100 Ml , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Cisplatin Injection 10 Mg , Cisplatin Injection 50 Mg, 1 Mg/Ml Vial , Citicoline Tablet 500 Mg , Clarithromycin 500 Mg Tablet , Clindamycin Gel 1% W/W, 10 Gm , Clinidipine Tablet 10 Mg , Clobazam Capsule 10 Mg , Clobetasol + Gentamycin Ointment 0.05% + 0.1 %, 15 Gm , Clobetasol + Salicylic Acid Cream 20 Gm , Clobetasol Cream 10Gm (0.05%) , Clobetasol+Saliyltic Acid Cream 10Gm , Clobetasone Butyrate + Miconazole Cream , Clofazimine 100 Mg Tablet , Clofazimine 50 Mg Tablet , Clomifene Citrate Tablet 50 Mg , Clonazepam 0.25 Mg Tablet , Clonazepam Tablet 0.5 Mg , Clonazepam Tablet 1 Mg , Clonidine 0.1 Mg Tablet , Clonidine 100Mcg Tab. , Clopidogrel Tablet 75 Mg , Clotrimazole +Beclomethasone 10Gm Cream , Clotrimazole 1% W/V + Lignocaine Hydrochloride 2% W/V Ear Drops, 5Ml , Clotrimazole Cream 2 %, 15Gm , Clotrimazole Ear Drops 1% W/V, 5Ml , Clotrimazole Mouth Paint 1% W/V, 15 Ml , Clotrimazole Pessaries 200 Mg , Clotrimazole200mg + Clindamycin 100 Mg Pessaries , Clotrimazole Powder 75 Gm , Cloxacillin Capsule 500 Mg , Clozapine 100 Mg Tablet , Clozapine 25 Mg Tablet , Clozapine 50 Mg Tablet , Coal Tar Solution 5%, 100Ml , Coconut Oil 100Ml , Codeine Phosphate 10Mg +C.P.M. 4Mg Per 5Ml,100Ml , Colistin Lyophilized Powder 4.5 Million I U Per Vial Injection , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , Colostrum 500Mg Cap. , Combination Of Clinidine Bromide 2.5 Mg +Chlordiazepoxide 5.0 Mg+Dicyclomine 10.0 Mg (Normaxin Equivalent) Tablet , Conjugated Estrogen Tablet 0.625Mg , Cotrimazole 1 % + Betamethasone 0.0025% Lotion 15 Ml , Cotrimoxazole (Sulfamethoxazole + Trimethoprim) Tablet 800 Mg + 160 Mg , Co-Trimoxazole [Sulphamethoxazole (A) + Trimethoprim (B)] Oral Liquid 200 Mg (A) + 40 Mg (B)/5 Ml , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg, 100 Ml , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg, 60 Ml , Cough Syrup Ambroxol-15 Mg + Terbutaline Sulphate-1.5 Mg + Guaiphenesin-50 Mg/ 5 Ml 100 Ml , Cough Syrup Diphehydramine 14 Mg + Ammonium Chloride 135 Mg + Sodium Citrate 57 Mg + Menthol 0.9 Mg/5 Ml 100 Ml Bottle , Crotamiton Cream 20Gm , Cycloserine 250 Mg. Tablet , Cycloserine 500 Mg. Tablet , Cyclopentolate Hcl Eye Drops 1% W/V , 5Ml , Cyclophosphamide Injection 1000Mg, 1.33Mg/Ml Vial , Cyclophosphamide Injection 500Mg, 10Mg/Ml Vial , Cyclophosphamide Tablet 50 Mg , Cyproheptadine Tablet 4 Mg , Dacarbazine Injection 200 Mg, 10Mg/Ml Vial , Dacarbazine Injection 500 Mg , Daclatasvir 30 Mg Tablet , Daclatasvir 60 Mg Tablet , Darifenacin Tablet 7.5 Mg , Deferasirox Tablet 500 Mg , Deferasirox Tablet 250 Mg , Deferiprone Tablet 500 Mg , Deferoxamine Mesylate 2 Grams Per Injection , Degaralix Injection 240 Mg , Desferrioxamine Injection 500 Mg , Desvenlafaxine Tablet 50 Mg , Dexamethasone 6 Mg Tablet(Covid) 6 Mg , Dexamethasone Injection 4Mg/Ml, 2 Ml Ampoule , Dexamethasone Tablet 0.5 Mg , Dexamethasone Tablet 4 Mg , Dexamethasone Tablet 8 Mg , Diacerein 50 Mg + Glucosamine Sulphate 500 Mg Tablet , Diazepam Injection 5 Mg/Ml, 2 Ml Ampoule , Diclofenac (Sodium) Injection 25 Mg/Ml ,3Ml Amp. , Diclofenac + Paracetamol Tablet 50Mg+325Mg , Diclofenac 50Mg + Chlorzoxazone500mg + Paracetamol 250 Mg Tablet , Diclofenac Gel 1%, 30 Gm Tube , Diclofenac Injection 75 Mg/Ml ,1Ml Amp. (Intravenous) , Diclofenac Sodium Gastro-Resistant Tablet 50 Mg , Diclofenac Supositories 50 Mg , Diclofenac Spray 30Ml , Diclofenac Spray 100Ml , Dicyclomine 10 Mg+Mefenamic Acid 250 Mg Tablet , Dicyclomine 20 Mg+Mefenamic Acid 500 Mg Tablet , Dicyclomine Injection 2 Ml Ampule , Dicyclomine Oral Solution 10Mg/5Ml , Dicyclomine Tablet 10 Mg , Dienogest Tablet 2 Mg , Digestive Enzymes Capsule , Digoxin Tablet 0.25 Mg , Diltiazem Injection 5 Mg/Ml, 5Ml , Diltiazem Tablet 30 Mg , Dinoprostone Gel 0.5 Mg, 3 Gm , Disodium Hydrogen Citrate Oral Solution 1.38 Gm/ 5 Ml, 100 Ml , Distilled Water/Sterile Water 10Ml. , Distilled Water/Sterile Water 5Ml , Disulfiram Tablet 250 Mg , Disulfiram Tablet 500 Mg , Divalproex Sodium Tablet 500 Mg , Dns ( Sodium Chloride And Dextrose, Each 100 Ml Contains Dextrose 5 Gm, Nacl 0.9 G) 500Ml (Ffs Techonology) , Dobutamine Injection 250 Mg/5 Ml , Docitaxel Injection 120 Mg, 20Mg/ 0.5 Ml Vial , Dolutegravir Tablet 50 Mg , Domperidone Oral Solution 1 Mg/ Ml, 30Ml , Domperidone Tablet 10 Mg , Donepezil Injection 10 Mg , Donepezil Tablet 10 Mg , Donepezil Tablet 5 Mg , Dopamine Injection 40 Mg/ Ml In 5Ml Ampoule , Dothiepin Tablet 25 Mg , Dothiepin Tablet 75 Mg , Doxophylline 400 Mg Tablet , Doxorubicin Injection 10 Mg, 10Mg/Ml Vial , Doxorubicin Injection 50 Mg, 10Mg/Ml Vial , Doxycycline Capsules 100 Mg , Doxylamine Tablet 10 Mg , Drotaverine 40 Mg Tablet , Drotaverine 80 Mg + Mefenimic Acid 500 Mg Tablet , Drotaverine Injection 40 Mg/ 2 Ml , Drotaverine Tablet 80 Mg , Duloxetine Capsule 20 Mg , Duloxetine Tablet 30 Mg , Ecg Jelly 200 Ml Bottle , Elemental Iron 60 Mg +Folic Acid 500 Mcg, Sugar Coated And Red Color Tablet , Empagliflozin Tablet 10 Mg , Enema , Enoxaparin 40 Mg Inj. , Enoxaparin 60 Mg Inj. , Entacavir 0.5 Mg Tablet , Entecavir 1 Mg Tablet , Epirubicin Injection 10 Mg, 2Mg/Ml Vial , Epirubicin Injection 50 Mg, 2Mg/Ml Vial , Erlotinib Tablet 100 Mg , Erythromycin Syrup 125 Mg/5 Ml, 60 Ml , Erythromycin Tablet 250 Mg , Erythropoietin Injection 40000 Units/Ml, Single Dose 1 Ml Vial , Escitalopram Tablet 10 Mg , Estrogens Cream 0.625 Mg , Ethambutol Tablet 100 Mg , Ethambutol Tablet 400 Mg , Ethambutol Tablet 800 Mg , Ethamsylate Injection 250 Mg/2 Ml , Ethamsylate Tablet 250 Mg , Ethamsylate Tablet 500 Mg , Ethionamide 250 Mg Tablet , Ethionamide 500 Mg Tablet , Ethinyestradiol Tablet 5 Mcg , Etizolam Tablet 0.50 Mg , Etophylline + Theophylline Injection 169.4 Mg + 56.6 Mg/2 Ml , Etophylline + Theophylline Tablet 231 Mg + 69 Mg (Sr) , Etoposide Capsule 50 Mg , Etoposide Injection 100Mg, 20Mg/Ml Vial , Etoricoxib Tablet 90 Mg , Exemestene Tablet 1 Mg , Favipiravir(Covid) 400 Mg , Febuxostat 40 Mg Tablet , Fentanyl Injection 50 Mcg/Ml, 2Ml Ampoule , Ferrous (Iron Sucrose) Injection 20 Mg/Ml, 5 Ml Amp. , Ferrous Salt + Folic Acid(Ifa Wifs) Tablet(Enteric Coated) Equivalent To 100 Mg Iron + 500 Mcg Folic Acid (Blue) , Ferrous Sulpahte + Folic Acid Syrup 100 Mg + 0.5 Mg/ 5 Ml, 50 Ml Bottle, Ropp Cap Bottle With Inert Liner & Bottle To Be Provided With A Dispenser To Dispense To 1 Ml Each Time And Packed In A Mono Carton , Fevipiravir 200Mg Tablet , Fexofenadine 120 Mg Tablet , Fexofenadine 180 Mg Tablet , Filgrastim Injection 300Mcg, 300Mcg/0.5 Ml Prefilled Syringe , 3 Fdc Tablet (Each Film Cated Tablet Contains Rifampicin 150 Mg+ Isoniazid 75 Mg+ Ethambutol 275 Mg) Fixed Dose Combination For Tb , 4 Fdc Tablet (Each Film Cated Tablet Contains Rifampicin 150 Mg+ Isoniazid 75 Mg+ Ethambutol 275 Mg + Pyrazinamide 400Mg) Fixed Dose Combination For Tb , Flouromethalone 0.1% W/V Eye Drops 5Ml , Fluconazole Capsule/Tablet 150 Mg , Fluconazole Capsule/Tablet 200 Mg , Fluconazole Injection 200 Mg/ 100 Ml , Flunarazine Tablet 10 Mg , Fluoxetine Capsule 20 Mg , Fluphenazine Injection 25 Mg, 1 Ml Ampoule , Flurbiprofen Sod. Eye Drops 0.03%W/V ,10Ml , Fluticasone Cream 0.01%, 10Gm , Fluticasone Furoate Nasal Spray , Fluvoxamine 150 Mg Tablet , Folic Acid Tablet 5Mg , Formaldehyde Solution 400Ml , Formalin Tablet , Formocresol Formalin, Cresol Glycerin ,Formocresol Formalin Bp 20% V/V , Cresol Ip 32% V/V , Glycerin Ip Qs, 20Ml , Framycetin Cream 1%, 30 Gm Tube , Furosemide Injection 10 Mg/Ml, 2Ml Ampoule , Furosemide Tablet 40 Mg , Fusidic Acid Cream 2 %, 10 Gm , Gabapentin + Nortriptyline (400/10Mg) Tablet , Geftinib Tablet 250 Mg , Gemcitabine Injection 200Mg, 100Mg/Ml Vial , Gentamycin Injection 40 Mg/ Ml, 2 Ml Vial , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 50 Ml Dark Bottle , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 15 Ml Dark Bottle , Glimipride Tablet 1 Mg , Glimipride Tablet 2 Mg , Glucose With Sodium Chloride/Saline Injection 5% Glucose + 0.9% Sodium Chloride, 500Ml (Ffs Technology) , Glucose/Dextrose Injection 10% Isotonic 500 Ml(Ffs Technology) , Glucose/Dextrose Injection 25%, 100 Ml(Ffs Technology) , Glucose/Dextrose Injection 5% Isotonic 500 Ml(Ffs Technology) , Glycerine Trinitrate Injection (Nitro Glycerine) 5 Mg/ Ml , Glyceryl Trinitrate ( Niroglycerine) Injection 5 Mg/Ml, 5 Ml Ampule , Glyceryl Trinitrate (Sublingual) Tablet 500 Micrograms , Glycopyrolate Injection 0.2 Mg/Ml, 1 Ml Ampoule , Glycopyrronium +Formoterol Fumarate Rota Caps , Goserline Injection 10.8 Mg , Granisetron Injection 1 Mg , Granisetron Injection 3 Mg , Griseofulvin Tablet 250 Mg , Haloperidol Injection 5 Mg/ Ml , Haloperidol Injection Long Acting 50 Mg , Haloperidol Tablet 5 Mg , Halothane Inhalation 250 Ml Bottle , Hcg (2000 Iu) Inj. , Hcg (5000 Iu) Inj. , Heparin Injection (5000 Iu/Ml) 5Ml, 1% , Hepatitis B Immunoglobulin Injection 100 Iu/ 1Ml. , Hepatitis B Vaccine (R Dna) I.P. 0.5Ml Inj, 10Mcg/0.5Ml , Hepatitis B Vaccine (R Dna) I.P. 0.5Ml Inj, 5Mcg/0.5Ml , Homatropine Eye Drops 1%, 5Ml , Homatropine Eye Drops 2%, 5Ml , Human Albumin 20% Sol. Ip, 100Ml For I/V Use , Hyaluronidase Injection 1500 Iu/Ml , Hyaluronidase Injection 1500 Iu/Ml (Appasamy) , Hydrochlorothizide 12.5 Mg Tablet , Hydrocortisone ( Sodium Sucinate Powder) Injection 100 Mg Vial, With 2 Ml Distilled Water For Reconstitution , Hydrogen Peroxide Solution 6%, 400 Ml Bottle , Hydroprogesterone 250 Mg Inj. , Hydroprogesterone 500 Mg Inj. , Hydroquinone 2%/4% + Tretinoin 0.025 % +Fluocinolone Skin Cream, 15 Gm Tube , Hydroquinone 2.0% W/W + Tretinoin 0.025% W/W + Mometasone Furoate 0.1% W/W In A Cream Base Q.S, 15 Gm Tube , Hydroquinone 20Gm Cream , Hydroxy Urea Cap 500Mg , Hydroxychloroquine 200 Mg Tablet , Hydroxychloroquine 400 Mg Tablet , Hydroxycobalamin Injection 1 Mg/ Ml , Hydroxypropyl Mehtylcellulose Injection 2 %, 5Ml , Hydroxypropyl Mehtylcellulose Injection 2 %, 5Ml (Appasamy) , Hydroxyzine Tablet 10 Mg , Hynidase / Omnidase Inj., 1500 Iu, Dry Vial Of Powder Not For Iv Use , Hyoscine Butyl Bromide Injection 20 Mg/ Ml , Hyoscine Butyl Bromide Tablet 10 Mg , Ibuprofen Oral Solution 100 Mg/5 Ml. 60 Ml Bottle , Ibuprofen Tablet 200Mg , Ibuprofen Tablet 400 Mg , Ibuprofen Tablet 400 Mg +Paracetamol 325 Mg Tablet , Ichthammol Glycerine Solution 10 Ml Vial , Imatinib Tablet 400 Mg , Imipenem And Cilastatin Injection (500 Mg+500 Mg) , Imipenem Injection 500Mg , Imipramine 75 Mg Tablet , Imipramine Tablet 25 Mg , Indomethacin 25 Mg Tab , Insulin (Soluble) Injection 40 Iu/Ml In 10 Ml Vial , Intracameral Lignocaine 1% 2Ml Inj , Intracameral Moxifloxacin Inj. (Opthalmic Sol.) , Intracameral Phenylephrine 0.5Ml Solution For Pupil Cataract Surgery , Intravenous Immunoglobulin(Ivig) 10 Gm,100 Ml Bottle , Iohexol Injection 300 Mg , Ipratropium Respirator Solution For Use In Nebulizer 250Mcg/ 1Ml, 2Ml , Iron And Folic Acid Tablet ( Wifs Junior ) Containing Dried Ferrous Sulphate Ip Equivalent To Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet. Tablet Are Sugar Coated And Pink Coloured Tablets With Only Edible Colours Used Tablet Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet , Iron Sucrose 100 Mg/Ferric Carboxymaltose Ml , 10 Ml Inj. , Isoflurane Inhalation 100 Ml Vial , Isoniazid Tablet 100Mg , Isoniazid Tablet 300Mg , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Isosorbide Dinitrate Tablet (Sublingual) 5 Mg , Isosorbide Mononitrate Tablet 20 Mg (Xr) , Isosorbide Mononitrate Tablet 30 Mg (Sr) , Isotretinoin Capsule 20 Mg , Isoxsuprine Injection 5 Mg/ Ml, 2Ml , Isoxsuprine Tablet 10 Mg , Ispaghula Granules/ Husk/ Powder Sachet 3.5 Gm , Ispaghula Granules/ Husk/ Powder 100Gm. Gm , Itraconazole 100 Mg Tablet , Itraconazole 200 Mg Tablet , Ivermectin Tablet 12 Mg , Ivermectin Tablet 6 Mg , Ketaconazole Lotion 2% W/V, 50 Ml , Ketamine (As Hydrochloride) Injection 50 Mg /Ml,10 Ml Vial , Ketoconazole 200 Mg Tablet , Ketoconazole Sampoo 100Ml , Kojic Acid Cream 2 %, 15Gm , Labetalol Injection 20 Mg, 5Mg/Ml, 4 Ml Amopule , Labetalol Tablet 100 Mg , Lacosamide Tablet 100 Mg , Lactulose Solution 10 Mg/15 Ml, 60Ml , Lantus Insulin (Insulin Glargine 100 Units/Ml) , Latanoprost Ear Drops 0.005 % W/V, 5 Ml , Lenalidomide Tablet 10 Mg , Letrozole Tablet 2.5 Mg , Leucovorin Injection 50 Mg/5Ml , Levamasole Tablet 150 Mg , Levamasole Tablet 50 Mg , Levetiracetam Tablet 500 Mg , Levitiracetam Oral Solution 500Mg/5Ml, 100Ml , Levitracetam 500Mg/5Ml Inj., 5Ml Inj , Levocetrizine 5Mg + Montekulast 10 Mg Tablet , Levocetrizine Tablet 5 Mg , Levodopa + Carbidopa Tablet 100 Mg + 10 Mg , Levodopa Tablet 100Mg , Levofloxacin Eye Drop 5Ml , Levofloxacin Tablet 250Mg , Levofloxacin Tablet 500 Mg , Levosalbutamol (0.63Mg) Respules 2.5Ml , Levosalbutamol 1.25Mg + Ipratropium, 500Mcg, Respules , Levosulpride (Sr) 75 Mg + Rabeprazole (Ec) 20 Mg Capsule , Levothyroxine 100 Mcg Tablet , Lidocaine (2% W/V) + Clotrimazole 1% W/V + Beclomethasone 0.025% W/V + Ofloxacin (0.3% W/V) 5Ml Ear Drops , Lidocaine 10% Spray, 50Ml , Lidocaine 30Ml Inj. , Lidocaine Topical Spray (15% W/W), 100 Ml , Lignocaine 1% Ointment, 30Gm , Lignocaine 4% Spray Topical Solution 30Ml , Lignocaine Hydrochloride And Adrenaline Bitartarate Injection 20Mg/Ml And 0.01Mg/Ml Adrenaline, 30 Ml Vial , Lignocaine Injection 2%, 30 Ml Vial , Lignocaine Jelly 2% W/V ( With Seprate Nosal), 30Gm Tube , Linezolid Inj. 600Mg , Linezolid Tablet 600 Mg , Lithium Carbonate Tablet 300 Mg , Lithium Tablet special repair 400 Mg , Lmw Heparin Injection 60Mg/0.6Ml For Sc Use Prefilled Syringe , Loperamide 2Mg Tab. , Lorazepam Injection 4Mg, 2Ml , Lorazepam Tablet 1 Mg , Lorazepam Tablet 2 Mg , Losartan + Hydrochlorothiazide Tablet (50 Mg + 12.5 Mg) , Luliconazole Cream 1 % W/W, 30 Gm , Luperolide Acetate Injection 22.5 Mg , Magnesium Sulphate + Sullfacetamide (Sumag ) 75Gm Ointment , Magnesium Sulphate 58%, Urea 1%, Sulphacetamide Sodium 2.5%, Proflavine 0.1% (In Glycerine Base) Ointment 75Gm , Magnesium Sulphate Injection 1 Gm /2Ml (50%W/V), 2 Ml Ampoule , Magnesium Sulphate Injection 2.5 Gm /5Ml(50%W/V), 5 Ml Ampoule , Magnesium Sulphate Injection 500Mg/Ml,1 Ml Ampoule , Malathion 50% Ec, 1 Ltr , Malathion Technical 95%, 25 Kg , Mannitol Injectable Solution 20 %,100 Ml (Ffs Technology) , Mdi-Formoterol+Budesonide Inhaler , Medroxyprogesterone Acetate Injection Ip (Dmpa ) 25 X 1X 1Ml (Contraceptive Injection For Im Use Only) , Medroxyprogesterone Tablet 10 Mg , Melatonin Tablet 3 Mg , Memantine Tablet 5 Mg , Mephentermine Injection 30 Mg/Ml, 10 Ml Amp. , Meropenum Injection 125 Mg , Meropenum Injection 250 Mg , Meropenum Injection 500 Mg , Mesalamine 800 Mg Tablet , Mesna Injection 400 Mg , Metformin special repair 1 Gm Tablet , Metformin special repair 500 Mg Tablet , Metformin Tablet 1 Gm , Metformin Tablet 500 Mg , Methotrexate Injection 50 Mg, 2Ml Inj , Methotrexate Tablet 2.5 Mg , Methotrexate Tablet 50 Mg , Methoxsalen Tablet 10 Mg , Methyl Cobalamine 1500 Mcg Inj. , Methyl Cobalamine 500 Mcg Inj. , Methyl Ergometrine Injection 200 Mcg In 1 Ml Ampoule , Methyl Ergometrine Tablet 125 Mcg , Methyl Prednisolone Injection 1Gm, 1 Gm Vial With Diluent , Methyl Prednisolone Injection 80Mg , Methylcobalamin Tablet 1500 Mcg , Methylcobalamin Tablet 750 Mcg , Methylcobalamine + Pregabaline (1500+75) Tablet , Methyldopa Tablet 250 Mg , Methyldopa Tablet 500 Mg , Methylene Blue 25 Gm , Methylphenidate Tablet 5 Mg , Methylrosanilinium Chloride (Gentian Violet) Topial Preparation 0.25 % To 2% , Metoclopramide Injection 5 Mg/Ml, 2 Ml Ampoule , Metoclopramide Tablet 10 Mg , Metoprolol 5 Ml Injection , Metoprolol Tablet (Sr) 50 Mg , Metoprolol Xl 25 Mg Tablet , Metronidazole Injection 500 Mg/ 100Ml (Ffs Technology) , Metronidazole Oral Solution 200 Mg/5 Ml, 60Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Micronized Progesterone Tablet 200 Mg , Midazolam Injection 1 Mg/Ml, 5 Ml Vial , Mifepristone Tablet 200 Mg , Mifepristone Tablet 25 Mg , Minoxidil Solution 5% , Mirabegron Tablet 50 Mg , Mirtazapine Tablet 15 Mg , Mirtazepine 7.5 Mg Tablet , Misoprostol Tablet 200 Mcg , Misoprostol Tablet 25Mg , Mitomycin Injection 40 Mg , Mometasone + Terbinafine (0.1% W/W + 1.0 % W/W) 15 Gm Cream , Mometasone Furoate Cream 0.1 % W/W, 30Gm , Monteleukast Tablet 5 Mg , Montelucast 10Mg + Fexofenadine 120Mg Tablet , Morphine Injection 10 Mg/Ml, 1 Ml Ampoule , Morphine Tablet 10 Mg , Morphine Tablet 20 Mg , Morphine Tablet 30 Mg special repair , Mouth Ulcer Gel (Choline Salicylate Sodium 9% W/V, Benzalkonium Chloride 0.01% W/W) , Moxifloxacin 400 Mg. Tablet , Moxifloxacin 0.5% Eye Drop ,5Ml , Moxifloxacin 0.5% W/V+ Ketorolac 0.5% W/V Eye Drop ,5Ml , Moxifloxacin 0.5% W/V+ Prednisolone 1% W/V Eye Drop ,5Ml , Moxinidine 0.2 Mg Tablet , Multi Electrolyte Injection (Isolyte -P) 500Ml , Multi Vitamin Injection 10 Ml , Multi Vitamin Injection 2 Ml , Multi Vitamin Syrup With Trace Elements, 200Ml (Ffs Technology) , Multivitamin Drops, 15 Ml , Mupirocin Cream 5Gm, 2% W/W , Mupirocin Ointment 2% W/W, 5 Gm Tube , N-Acetylcysteine 600 Mg Tablet , Naloxone Injection 400 Mcg/Ml, 1Ml Ampoule , Naltrexone Tablet 50 Mg , Nandrolone Decanoate 50Mg Inj. , Naocl 5.25% Solution Isi/ Iso/Ce/Marked. , Naproxen 500Mg + Domperidone 10Mg Cap./Tab , Natamycin Eye Drops 2%, 5 Ml , Nebivalol Tablet 5 Mg , Neostigmine Injection 500 Mcg/ Ml , Netilmicin Injection 25Mg/Ml , Nicorandil 10 Mg Tablet , Nicorandil 5 Mg Tablet , Nicotin Chewgum 2 Mg , Nicotin Chewgum 4 Mg , Nicotine Pastilles 2 Mg , Nicotine Pastilles 4 Mg , Nicotine Patches , Nifedipine 0.3% W/W + Lidocaine 1.5% W/W Ointment, 30 Gm , Nifedipine Capsule(Sublingual) 5 Mg , Nifedipine Tablet Ip Sr/Er 10 Mg , Nikethamide Inj. 250Mg/1Ml , Nitrofurantoin Tablet 100 Mg , Nitroglycerin 2.6 Mg Tablet , Nitroglycerin 6.4 Mg Tablet , Nitroglycerin Inj. 25Mg/5Ml , Nitrous Oxide Inhalation , Nor Adernaline Injection 4Mg/2Ml , Norethisterone Tablet 5 Mg , Norfloxacin 400Mg Tab , Normal Saline (Sodium Chloride) Injection 0.9% Isotonic, 500 Ml (Ffs Technology) , Normal Saline (Sodium Chloride) Injection Solution 0.9% Isotonic, 100Ml(Ffs Technology) , Normal Saline 3% Injection 100Ml , Octreotide Injection 100 Mcg/Ml, Single Dose 1 Ml Vial , Ofloxacin + Dexamethasone Eye Drops 10 Ml , Ofloxacin 200Mg + Ornidazole 500Mg Inj.,100 Ml , Ofloxacin Tablet 200 Mg , Olanzapine 5 Mg Tablet , Olanzapine Injection 10Mg/Vial , Olanzapine Injection 210 Mg Long Acting , Olanzapine Injection 300 Mg Long Acting , Olanzapine Injection 405 Mg , Olanzapine Tablet 10 Mg , Olanzapine Tablet 20 Mg , Olmesartan 20 Mg + Amlodipine 5 Mg + Hydrochlorothiazide 12.5 Tablet , Olmesartan 20 Mg Tablet , Olpatadine 0.1%W/V Eye Drop 5 Ml , Omeprazole Capsule 20 Mg , Ondansetron Injection 2Mg/Ml ,2Ml Ampoule , Ondansetron Oral Liquid 2 Mg/ 5 Ml , Ondansetron Tablet 8 Mg , Oral Caffiene Citrate Sol. 20Mg/Ml, 3Ml , Oral Glucose 75 Gm , Oral Rehydration Salts Powder For 1000 Ml Solution , Oral Rehydration Salts Powder For 200 Ml Solution , Oseltamivir Syrup (Each 1 Ml Reconstituted Suspension Contain 12 Mg Oseltamivir, 75 Ml Bottle) Syrup , Oseltamivir Tablet 30 Mg , Oseltamivir Tablet 45 Mg , Oseltamivir Tablet 75 Mg , Oxaliplatin Injection 100Mg, 5Mg/Ml Vial , Oxaliplatin Injection 50Mg, 5Mg/Ml Vial , Oxygen (Medicinal Gas) Inhalation Per Kg , Oxytocin Injection 5 Iu In 1 Ml Ampoule , Paclitaxel Injection 260Mg, 10Mg/1.67 Ml Vial , Pantoprazole + Domperidone special repair (40Mg+30Mg) Capsule , Pantoprazole Injection 40 Mg , Paracetamol Drops 150Mg/Ml, 10 Ml Vial With Marked Dropper , Paracetamol Infusion 100 Mg/ 5 Ml, 100Ml , Paracetamol Injection 150 Mg/Ml, 2 Ml Amp. , Paracetamol Peadiatric Syrup 125Mg/ 5Ml, 60 Ml Bottle , Paracetamol Tablet 500 Mg , Paracetamol Tablet 650 Mg , Paroxetine (Cr) Tablet 25 Mg , Paroxetine Tablet (Cr) 12.5 Mg , Pazopanib Tablet 200 Mg , Peg Filgrastim Injection 6 Mg , Pemetrexed Injection 500Mg, 25Mg/Ml Vial , Pentazocine Injection 30 Mg/ Ml, 1 Ml Ampoule , Perampenel 2 Mg , Permethrin Cream 5% 30 Gm , Permethrin Lotion 5% 50 Ml , Pethidine Injection 50 Mg/Ml, 1Ml Ampoule , Pheniramine Maleate Injection 22.75 Mg/Ml, 2 Ml , Phenobarbitone Injection 200 Mg/ Ml , Phenobarbitone Oral Solution 20 Mg/ 5 Ml,60 Ml Bottle , Phenobarbitone Tablet 30 Mg , Phenobarbitone Tablet 60 Mg , Phenylephrine 10Mg + Pcm 325Mg +Cetrizine 5Mg Tablet (Anticold Tablet) , Phenytoin (Sodium) Injection 100Mg, 2Ml Amp. , Phenytoin Oral Solution 25 Mg/Ml, 100 Ml Glass Bottle , Phenytoin Tablet 100 Mg , Phenytoin Tablet 300 Mg , Phytomenadion Injection 1 Mg/0.5 Ml Water Based Single Dose (Vitamin-K1) , Pilocarpine Hcl 2% ,5Ml Eye Drops , Pilocarpine 1Ml Injection , Pioglitazone 30Mg Tab. , Pioglitazone 50 Mg Tablet , Piperacillin 1 Gm + Tazobactum 0.12Gm Injection , Pipracillin + Tazobactoam 4.5 Gm I/V Injection , Piracetam 400Mg Tab. , Piracetam 800Mg Tab. , Plasma Volume Expender Injection 500 Ml , Podophylline Resin Topical Solution 25% , 10 Ml Bottle , Posaconazole 100 Mg Tablet , Potassium Chloride (Solution) Injectable 15% (150Mg/Ml) , Potassium Chloride Oral Liquid 500 Mg/5 Ml, 100Ml , Potassium Permanganate Crystal 100 Gm(Kmno4) , Potassium Permanganate Crystal 20 Gm(Kmno4) , Povidine Iodine 10% ,500 Ml Solution , Povidine Iodine 5% Eye Drops, 5Ml , Povidine Iodine Ointment 5%,15 Gm , Povidine Iodine Scrub 7.5%, 500 Ml , Povidine Iodine Solution 5% ,500 Ml , Pralidoxime (Pam) Injection 500 Mg, 20 Ml , Prazosin 5 Mg Tablet , Prednisolone Sod. Phosphate Eye Drop 1%, 5Ml , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Pregabalin 75 Mg+ Methylcobalamin 750 Mcg Tablet , Pregabalin 75Mg Cap. , Pregablin 75Mg +Methylcobalmin 1500Mg +Nortriptylline 10Mg , Primaquine Tablet 15 Mg , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Probiotic Capsule , Prochlorperazine Mouth Dissolving Tablet Flavored Base 5Mg , Promethazine Elixir Or Syrup 5 Mg/ 5 Ml,60Ml , Promethazine Injection 25 Mg/Ml, 2 Ml annual periodical maintenance , Propofol Injection 1% Vial(10Mg/Ml,10 Ml Vial) , Propranolol Tablet (Sr) 40 Mg , Propranolol Tablet 20 Mg , Prostadin 2 Ml annual periodical maintenance Injection , Protamine Sulphate (Heparin Antagonist) Injection 10 Mg/Ml, 5-Ml Ampoule , Purified Freeze - Dried Human Coagulation Factor Viii, Virus Inactivated Injection 250 Iu , Purified Freeze Dried Human Coagulation Factor Ix, Virus Inactivated / Anti Hemophillic Factor Ix Injection 500Iu , Pyrazinamide 500 Mg Tablet , Pyrazinamide 750 Mg Tablet , Pyrazinamide 1000 Mg Tablet , Pyridium Tablet 200 Mg , Pyridoxine Tablet 50 Mg , Pyridoxine Tablet 100 Mg , Quetiapine Tablet 50 Mg , Quetiapine Tablet special repair 100 Mg , Quinine Sulphate Injection 300 Mg/ Ml, 2Ml Ampoule , Quinine Sulphate Tablet 300 Mg , Rabeprazole +Domparidone Cap. Dsr , Ramipril Tablet 5 Mg , Ranitidine Injection 25 Mg/Ml, 2 Ml annual periodical maintenance , Ranitidine Syrup 75 Mg/5 Ml, 100Ml Bottle , Ranitidine Tablet 150 Mg , Ranolazine 500 Mg Tablet , Raybiotic-Ac Ear Drop (Beclomethasone +Chloramphenical+Clotimazole+Lignocaine) 5Ml Ear Drop , Recombinant Tissue Plasminogen Activator Injection Kit (18.1 Mg, 2 Single Use Diluent Vials For Reconstitution (10 Ml Sterile Water For Injection, 2 Sterile 10 Ml Syringes, 2 Sterile Dispensing Pins, 4 Sterile Needles, 2 Alcohol Swabs , Remdesivir Injection 100Mg , Respule Levosalbutamol 1.2Mg + Ipratropium 500Mcg Respule , Ribavirin 200 Mg Cap. , Rifampicin 150 Mg Capsule , Rifampicin 300 Mg Capsule , Rifampicin 450 Mg Capsule , Rifampicin 600 Mg Capsule , Rifapentine Tablet 300 Mg , Rifaximin 550 Mg Tablet , Ringer Lactate 500 Ml (Ffs Technology) , Ringer Lactate Injection 500Ml (Glass Bottle) , Risperidone Tablet 2 Mg , Risperidone Tablet 4 Mg , Rituximab Injection 500 Mg , Rosuvasatatin 10 Mg Tablet , Rosuvasatatin 20 Mg Tablet , Rosuvastatin 10 Mg+ Fenofibrates 160 Mg Tablet , Saccharomyces Boulardii 5 Cfu Sachets , Salbutamol Inhalation Mdi- 100 Microgram/ Dose , Salbutamol Nebulizer /Respirator Sol. 2.5Mg/2.5Ml , Salbutamol Oral Solution 2 Mg/5 Ml, 100Ml , Salbutamol Tablet 4 Mg , Salicylic Acid Ointment 6%, 15 Gm , Saline Nasal Drops 0.65%, 10Ml , Savlon Antisepic Solution / Liquid 100 Ml Bottle , Seasonal Influenza Quadrivalent/ Tetravalent Vaccine Single Dose , Sensorcaine Injection 0.5% 20 Ml , Serratiopeptidase 10Mg Tab. , Sertaconazole Cream 2% W/W, 15 Gm , Sertraline Tablet (Sr) 50 Mg , Sertraline Tablet 100 Mg , Sevelamer 800Mg Tablet , Sevoflurane Inhalation 250 Ml , Silodosin Tablet 8.0 Mg , Silver Sulfadiazine 250 Gm , Silver Sulfadiazine Cream 1%,30Gm , Simethicone+ Dill Oil + Fennel Oil Syrup, 15Ml , Sodium Bicarbonate Injection 7.5 % , 10 Ml Ampoule , Sodium Carboxymethyl Celloluse Eye Drop 0.5%W/V , 10Ml , Sodium Carboxymethyl Cellulose Eye Drops 0.5%W/V, 5Ml , Sodium Chloride Topical Eye Drop 6%W/V , 5Ml , Sodium Fusidate Skin 2% W/V Ointment 15Gm , Sodium Hylanuranate 1.8 % In 1 Ml Pfs ( (Isi/Iso/Ce Certified)) , Sodium Valproate Injection 100 Mg/Ml, 5Ml , Sodium Valproate Suspension 200 Mg/5 Ml, 100 Ml , Sodium Valproate/Valproic Acid (Sodium)Controlled Released Tablet 300 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 200 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 500 Mg , Sofosbuvir 400 Mg Tablet , Sofosbuvir 400 Mg Tablet + Ledipasvir 90 Mg Tablet , Sofosbuvir 400Mg+ Velpatasvir 100 Mg Tablet , Sorafenib Tablet 200 Mg , Sorbitrate (Iso-Sorbidnitrate Sublingual) 5 Mg Tablet , Spironolactone Tablet 25 Mg , Streptokinase Injection Powder 1500000 Iu , Succinyl Choline Injection 50 Mg/Ml, 10Ml , Sucralfate 1Gm With Oxetacain 10Mg/10Ml Suspension, 100 Ml Bottle , Sulfadoxine + Pyrimethamine Tablet 500 Mg + 25 Mg , Sulfasalazine Tablet 500 Mg , Sunitinib Tablet 50 Mg , Sunscreen Lotion Spf 26, 100 Ml , Surfactant- Survanta(Synthetic)(25 Mg/1Ml), Exosurf (Bovine) , Tacrolimus Ointment 0.03% W/W, 10 Gm , Tadalafil 10 Mg , Tamoxifen Citrate Tablet 10 Mg , Tamoxifen Citrate Tablet 20 Mg , Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg Tablet , Tamsulosin Tablet 0.4 Mg , Telmisartan Tablet 40 Mg , Telmisartan Tablet 80 Mg , Temozolamide Tablet 100 Mg , Temozolamide Tablet 250 Mg , Temphos 50% Ec 5 Liter Pack , Tenecteplase Injection 20 Mg , Teneligliptin Film Coated Tablet 20 Mg , Tenofovir 300 Mg Od Tablet , Tenofovir 300 Mg+ Lamivudine 300 Mg Tablet , Terbinafine Tablet 250 Mg , Terlipressin 1 Mg Inj. , Tetanus Toxoid Injection 0.5 Ml Ampoule , Tetanus Toxoid Injection 5 Ml Vial , Thalidomide Tablet 100 Mg , Thiamine Injection 100 Mg/Ml, 2 Ml , Thiamine Tablet 100 Mg , Thiocolchicoside Capsule 4 Mg , Thiopentone Injection Powder 0.5 G , Thyroxine Tablet 100 Mcg , Thyroxine Tablet 125 Mcg , Thyroxine Tablet 150 Mcg , Thyroxine Tablet 25 Mcg , Thyroxine Tablet 50 Mcg , Thyroxine Tablet 75 Mcg , Timolol Eye Drops 0.5% ,5Ml , Tinidazole Tablet 500 Mg , Tizanidine Tablet 4Mg , Tobramycin Eye Drops 0.3% W/V, 5Ml , Tocilizumab Injection 400 Mg/20 Ml , Toperamate Tablet 50 Mg , Torasemide Tablet 10 Mg , Torasemide Tablet 20 Mg , Torsemide + Spironolactone 10/50 Mg Tablet , Tramadol Capsule 50 Mg , Tramadol Hydrochloride Capsule 100 Mg , Tramadol Injection 50 Mg/Ml, 2 Ml Ampoule , Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet , Tranexamic Acid Injection 500 Mg/5 Ml , Tranexamic Acid Tablet 500 Mg , Tranylcypromine Tablet 5 Mg , Trastuzumab Injection 150 Mg , Trastuzumab Injection 450 Mg , Tretinon Gel (0.05%) 20Gm , Triamcinolone Injection 40 Mg/Ml , Triancinolone Oral Paste/Gel (0.1%) , Tricholine Citrate 275Mg + Cyproheptadine Hcl 2Mg/5Ml Syrup, 200Ml , Trihexyphenidyl Tablet 2 Mg , Trihexyphenidyl Tablet 5 Mg , Trimetazidine 35 Mg Tablet , Tropciamide Eye Drops 5Ml , Tropicamide + Phenylepherine Eye Drops 0.8% + 5%, 5Ml , Tropicamide Eye Drops 1% Eye Drop 5Ml , Tropicamide+Phenylepherine(0.8%+5%) Eye Drop 5Ml , Tryptan Blue Dye 0.06% W/V, 1 Ml Vial , Ursodeoxycholic Acid Tablet 300 Mg , Valethamate Injection 8 Mg/Ml , Vancomycin Injection 500 Mg , Vareniciline 0.5Mg Tablet , Vareniciline 1 Mg Tablet , Vecuronium Injection 10Mg Vial , Venalafaxine Tablet 37.5 Mg , Venalafaxine Tablet 75 Mg , Verapamil Tablet 40 Mg , Vidagliptin 50Mg , Vinblastine Injection 10 Mg, 1Mg/Ml Vial , Vincristine Suphate Injection 1 Mg, 1Mg/Ml Vial , Vitamin A Oral Solution 100000 Iu/Ml, 100Ml Bottle , Vitamin D Tablet (Chewable) 60000Iu , Vitamin D3 Drops 400 Iu/Ml, 30 Ml , Vitamin-D3 60000 Iu Cap. , Voglibose 0.3 Mg + Metformin 500Mg+ Glimipride 1 Mg Tablet , Voglibose 0.3 Mg Tablet , Vortioxetine Tablet 10 Mg , Warfarin (Sodium) Inj Single Dose Vial , Warfarin (Sodium) Tablet 2 Mg , Wax Dissolving Ear Drops Paradichlorbenzene + Benzocain + Chlorbutol + Turpentine Oil 2 % + 2.7 % + 5 % + 15 %, 15 Ml Bottle , Weekly Iron Folic Acid Tablet Each Tablet Containing 60 Mg Elemental Iron+500 Mcg Folic Acid, Sugar Coated ,Blue Colour , Xylometazoline Nasal Drops 0.05 %, 10Ml , Xylometazoline Nasal Drops 0.1 %, 10Ml , Zinc (Sulphate) Dispersible Tablet 20 Mg , Zinc Oral Drops, 30Ml , Zinc Syrup 20 Mg/5Ml, 100Ml , Zolidronic Acid Injection 4 Mg , 4% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 30 , 6% Taper Gutta Percha Size 35 , 6% Taper Gutta Percha Size 40 , Absorbent Point No.15-40, Isi/Iso/Ce Marked Packet Of 200 , Absorbent Point No.45-80, Isi/Iso/Ce Marked Packet Of 200 , Acrylic Teeth Cross Linked Anterior Set Of 12 Teeth Isi/Iso/Ce Marked , Acrylic Teeth Cross Linked Posterior Set Of 16 Teeth Isi/Iso/Ce Marked , Acrylic Teeth Cross Linked Teeth Set Of 28 Teeth Isi/Iso/Ce Marked , Acrylic Trimming Stone (Various Grit) Isi/Iso/Ce Marked , Acrylic Trimming Stone Isi/Iso/Ce Marked , Agar Isi/Iso/Ce Marked , Air Rotor Cartridges (Nsk) Standard Head Isi/Iso/Ce Marked , Air Rotor Cartridges (Nsk) Supertorque Isi/Iso/Ce Marked , Air Rotor Spray Isi/Iso/Ce Marked Bottle , Alginate Impression Material Isi/Iso/Ce Marked , Alu Wax Isi/Iso/Ce Marked , Amalgam Finishing Kit , Arch Bar Length 1 Feet Isi/Iso/Ce Marked , Articulating Paper Isi/Iso/Ce Marked (40-100 Microns) , B.P. Blade Size 11 Isi/Iso/Ce Marked , B.P. Blade Size 15 Isi/Iso/Ce Marked , B.P. Blade Size 23 Isi/Iso/Ce Marked , Beading Wax Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 2 Mm Thickness Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 3 Mm Thickness Isi/Iso/Ce Marked , Blue Elastic Separators ( Leone/ American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 1St Molars .022€ Mbt With Upper Triple And Lower Double Slot (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 2Nd Molars .022€ Mbt (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bonding Agent For Composite 2 Bottle Self Etch System Isi/Iso/Ce Marked 4-6 Gm Or Equivalent In Ml , Bonding Agent For Composite One Bottle Total Etch System (Bottle With Primer +Adhesive) 4-6 Gm Or Equivalent In Ml. Isi/Iso/Ce Marked , Bone Graft Material For Dental Purpose Isi/Iso/Ce/Marked , Boxing Wax Isi/Iso/Ce Marked , Calcium Hydroxide Paste In Syringe Isi/Iso/Ce Marked , Calcium Hydroxide Two Paste System Isi/Iso/Ce Marked , Carborundum Disc (Assorted Size)Isi/Iso/Ce Marked , Cavity Varnish Isi/Iso/Ce Marked , Ceramic Finishing Kit , Chrome Cobalt Alloy Isi/Iso/Ce Marked , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , Colourless O Rings (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Composite Finishing Kit - Disc Type With 180 To 240 Dics Of Different Grits ,Mandrel , Composite Finishing Kit With 12 To 24 Finishing Points Of Different Shapes , Composite Nanohybrid , Crimpable Hooks Isi/Iso/Ce Marked , Cu Niti Wires Rectangular Isi/Iso/Ce Marked , Cu Niti Wires Round Isi/Iso/Ce Marked , Dental Stone Isi/Iso/Ce Marked , Denture Polishing Cake Isi/Iso/Ce Marked , Diamond Disc For Lab Micro-Motor (Assorted Size)Isi/Iso/Ce Marked , Die Stone Isi/Iso/Ce Marked , Digital Films Size 11€X14” Compatible With Kodak Dry View 5800 Digital Imager Isi/Iso/Ce Marked , Digital Films Size 8€X10” Compatible With Kodak Dry View 5800 Digital Imager Isi/Iso/Ce Marked , Disclosing Agent Isi/Iso/Ce Marked , Disposable Patient Drape Sheets Size 1X1 Mtrs. , Dual Cure Resin Cement 9-11 Gm , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Continous Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Long Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Short Types Isi/Iso/Ce Marked , Electro- Polishing Solutionisi/Iso/Ce Marked , Endo Ice , Esthetic Fiber Post System , Etchant 37% Phosphate Acid In Gel Form 2-4 Gm, Isi/Iso/Ce Marked , Eugenol 110 Ml/Gm Isi/Iso/Ce Marked , Expansion Screw 3 Pin (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Fiber-Reinforced Splinting Material- Bondable Reinforced Ribbon Fiber-Approx. 2Mm Width Isi/Iso/Ce Marked , Finishing Stones (Assorted Size) Isi/Iso/Ce Marked , Fixer & Developer Solution Set ( Autoprocessor ) To Make 1.25 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Fixer & Developer Solution Set (Manual) To Make 13.5 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Flowable Composite , Forsus Fatigue Resistant Device( 3 M Unitek ), Proprietary Itemisi/Iso/Ce Marked , Friction Grip Carbide Burs For Cutting (Different Shapes) Isi/Iso/Ce Marked , Friction Grip Carbide Burs For Finishing (Different Shapes) Isi/Iso/Ce Marked , Friction Grip Diamond Burs (Different Shapes) Isi/Iso/Ce Marked , Gates Glidden Drill No.1 , Gates Glidden Drill No.2 , Gates Glidden Drill No.3 , Glass Lonomer Luting Cement Isi/Iso/Ce Marked , Glass Lonomer Restorative Cement Isi/Iso/Ce Marked , Glass Lonomer Silver Reinforced Isi/Iso/Ce Marked , Gluteraldehyde 2.45% W/V Disinfection Solution Isi/Iso/Ce Marked , Green Stick Impression Compound Isi/Iso/Ce Marked , Gutta Percha Point No. 15-40, Isi/Iso/Ce Marked , Gutta Percha Point No. 20, Isi/Iso/Ce Marked , Gutta Percha Point No. 25, Isi/Iso/Ce Marked , Gutta Percha Point No. 30, Isi/Iso/Ce Marked , Gutta Percha Point No. 45-80, Isi/Iso/Ce Marked , Heat Cure Acrylic Liquid Isi/Iso/Ce Marked , Heat Cure Acrylic Powder Isi/Iso/Ce Marked Pink , Hybrid Composite Resin For Anteriors 3-4 Gram Isi/Iso/Ce Marked , Impression Compound Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Blue Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Green Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Red Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Yellow Isi/Iso/Ce Marked , Investent Material And Liquid (Phosphate Bonded) Isi/Iso/Ce Marked (For Chrom Cobalt) , Investent Material And Liquid (Phosphate Bonded) Isi/Iso/Ce Marked (For Porcelain) , Investment Material (Gypsum Bonded) Isi/Iso/Ce Marked , Investment Material (Silicate Bonded) Isi/Iso/Ce Marked , Iopa Film Size 30/31 Mm X 40/41 Mm (Packet Of 150 Films ) Isi/Iso/Ce Marked , Iowa Wax Isi/Iso/Ce Marked , Korecta Wax No. 4 Isi/Iso/Ce Marked , Lentulo Spiral Filler , Ligature Wire Spool 0.009€(T Porthodontics/American Orthodontics / Libral) Isi/Iso/Ce Marked , Ligature Wire Spool 0.010€(T Porthodontics/American Orthodontics / Libral) Isi/Iso/Ce Marked , Light Cure Bonding Material (Dentsply / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek )Isi/Iso/Ce Marked , Light Cure Composite Resin-Packable Isi/Iso/Ce Marked 2-4 Gm Syringe , Local Anesthetic Liganocaine 2% With Adr 1 In 80000 For Dental Use , Loose Preadjusted Edgewise Mbt Bracket 022 Slot Isi/Iso/Ce Marked Per Bracket , Matrix Band (No. 1 Toflemire)-1Si/Iso/Ce Marked , Matrix Band (No. 8 Toflemire)-1Si/Iso/Ce Marked , Maxillofacial Silicone And Stain Isi/Iso/Ce Marked , Medical X-Ray Film (1X50) 8 X10 , Mercury Pure Triple Distilled 225Gm Vial Isi/Iso/Ce Marked , Metal Polishing Cakeisi/Iso/Ce Marked , Mineral Trioxide Aggregate Isi/Iso/Ce Marked , Mock Up/Diagnostic Waxisi/Iso/Ce Marked , Modeling Wax Isi/Iso/Ce Marked , Naoci 5.25% Solution Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -016X022 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -017X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -019X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 014 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 016 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 018 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 020 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Nickel Chromium Alloy Isi/Iso/Ce Marked Pack Of 1 Kg , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 12Mm Isi/Iso/Ce Marked , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 9Mm Isi/Iso/Ce Marked , Ni-Ti Open Coil Spring0 10€X 030 (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marke , Occlusal X-Ray Films (57X76 Mm) Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 10 Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 6Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 7Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 8Mm Isi/Iso/Ce Marked , Pit & Fissure Sealant Light Cure , Low Viscosity, Fluoride Releasing Isi/Iso/Ce Marked , Plaster Of Paris For Dental Use Isi/Iso/Ce Marked , Polyether Impression Material Base & Catalyst Base 300Ml, With 60 Ml Catalyst , One Dispenser With 3 Year Replacement Warranty Free With 50 Packs , Powerscope 2 (American Orthodontics Proprietary Item)Isi/Iso/Ce Marked , Pre Fabricate Metallic Post (Threaded) , Pre Fabricated Metallic Post ( Cemented) , Preadjusted Edgewise Stainless Steel Brackets Kit Containing Upper & Lower 2Nd Premolar To 2Nd Premolar Bondable Brackets With Upper Triple And Lower Double Weldable Buccaltubes,With Roth And Mbt Prescription And 0.022€And 0.018€ Slot (Leone/American Orth , Preformed Molar Bands Without Buccal Tubesisi/Iso/Ce Marked , Protemp 4 (Bisgma Temporary Crown Material) Iso/Isi/ Ce , Pumice Isi/Iso/Ce Marked , Resin Bonded Zinc Oxide-Eugenol Cement Isi/Iso/Ce Marked , Resin Cement Isi/Iso/Ce Marked , Retraction Cord (Assorted Size Isi/Iso/Ce Marked , Revo S Rotary Files Size As30 , Revo S Rotary Files Size As35 , Revo S Rotary Files Size As40 , Revo S Rotary Files Size Sc1 , Revo S Rotary Files Size Sc2 , Revo S Rotary Files Size Su , Ring Liner (Asbestos)Isi/Iso/Ce Marked , Root Canal File K 15-40, 21 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal File K 15-40, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal File K 45-80, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 15, 21 Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files H- 15-40 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files H 15-40, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 20 (21 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 45-80 (25 Mm) Pkt. Of Six Isi/Iso/Ce Marked Ce Marked Pkt. Of 200 , Root Canal Files H- 45-80, 21 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- No. 15 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files H- No. 20 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- 15, 21 Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- 20 (21 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files K- 45-80, 21Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 10 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 10, 25 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 15 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- No. 20 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- No. 6 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 6, ( 25 Mm) Pkt. Of Six 197.00 Isi/Iso/Ce Marked , Root Canal Files K- No. 8,(21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No.8, 25 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Spreader 15-40, 21 Mm Isi/Iso/Ce Marked , Root Canal Spreader 15-40, 25 Mm Isi/Iso/Ce Marked , Rotary Niti Files With 4% Taper Size #15/17.#20,#30.##40,21 Mm And 25 Mm Pack Of 4-6, Isi/Iso/Ce Certified/Usfda , Rotary Niti Files With 6% Taper Size #15/17.#20,#30.##40,21 Mm And 25 Mm Pack Of 4-6, Isi/Iso/Ce Certified/Usfda , Rpd Pattern Wax: Clasp Patternisi/Iso/Ce Marked , Rpd Pattern Wax: Major Connector Pattern Isi/Iso/Ce Marked , Rpd Pattern Wax: Minor Connector Pattern Isi/Iso/Ce Marked , Rubber Base Impression Material Addition Silicone Putty Isi/Iso/Ce Marked , Rubber Base Impression Material Addition Silicone Putty With Compatible Light Body 600-900Ml Putty With 50 Ml Light Per 300Ml Of Putty Isi/Iso/Ce Marked , Rubber Dam Sheet Isi/Iso/Ce Marked , Sand (For Sand Blaster)(250Micron) , Sand Paper Mandrel Isi/Iso/Ce Marked , Sand Paper No 100 Isi/Iso/Ce Marked , Sand Paper No 1000 Isi/Iso/Ce Marked , Sand Paper No 120 Isi/Iso/Ce Marked , Sand Paper No 400 Isi/Iso/Ce Marked , Sand Paper No 80 Isi/Iso/Ce Marked , Self Cure Bonding Material Isi/Iso/Ce Marked , Self Polymerizing Acrylic Liquid Isi/Iso/Ce Marked , Self Polymerizing Acrylic Powder Isi/Iso/Ce Marked Pink , Shellac Base Plate Isi/Iso/Ce Marked , Silicone Adhesive Isi/Iso/Ce Marked , Silicone Interocclusal Record Material Isi/Iso/Ce Marked , Silk Suture Material (3-0) , Silver Alloy Non Gamma-2 Lathe Cut Alloy 30 Gm Vial Isi/Iso/Ce Marked , Small Cotton Rolls For Isolation Isi/Iso/Ce Marked A Pack Of 1000 Pieces , Soft Denture Liner Isi/Iso/Ce Marked , Sprue Wax (Assorted Sizes)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 016X022 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 017X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 019X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 014 Inch (Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 016 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 018 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 020 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Wire 19 G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 21G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 26G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 30G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 19 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 20 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 21 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 23 Gauge Isi/Iso/Ce Marked , Sterilization Rolls For Packing Instrument 10Cm X 200 Mtrs. , Sterilization Rolls For Packing Instrument 15Cm X 200Mtrs , Sticky Wax Isi/Iso/Ce Marked , Suction Tips Isi/Iso/Ce Marked , Surgical Bur Straight Fissure Carbide 1 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 1.5 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 2 Mm Isi/Iso/Ce/Marked , Tma Wire Lengths Rectangular - 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wire Lengths Rectangular - 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tooth Colored Self Cure Acrylic Resin (Self Cure) Isi/Iso/Ce Marked , Tooth Preparation Kit Set Of Minimum 14 Burs Isi/Iso/ Ce Marked , Topical Fluoride Apf Gel 1.25% Isi/Iso/Ce Marked , Tray Adhesive For Addition Siliconeisi/Iso/Ce Marked , Waxes For Fpd (Assorted Consistency) Isi/Iso/Ce Marked (Block Out, Margin Wax, Carving Wax, Dipping Wax, Blue Wax, Spacer Wax Etc.) , Zinc Oxide Eugenol Impression Paste Isi/Iso/Ce Marked Pkt. Of (100-125)+ (60-90) Gm , Zinc Oxide Non Eugenol Impression Paste Isi/Iso/Ce Marked (Catalyst + Base Past) , Zinc Oxide Non -Eugenol Luting Cement Isi/Iso/Ce Marked , Zinc Oxide Powder 110 Gram Isi/Iso/Ce Marked , Zinc Phosphate Cement 30-100 Gm With Corresponding Liquid Isi/Iso/Ce Marked , Abdominal Drain 28 No (Isi/Iso/Ce Certified) , Abdominal Drain 30 No (Isi/Iso/Ce Certified) , Abdominal Drain 32 No (Isi/Iso/Ce Certified) , Absorable Gelatin Sponge, Single Unit(Abgel) , Adhesive Plaster(Medigrip) 3 Inches , Adhesive Plaster(Medigrip) 04 Inches , Agfa Complete X Ray Cassette With I.P Size 10X12 ( (Isi/Iso/Ce Certified)) , Agfa Complete X Ray Cassette With I.P Size 14X17 ( (Isi/Iso/Ce Certified)) , Agfa Complete X Ray Cassette With I.P Size 8X10 ( (Isi/Iso/Ce Certified)) , Agfa Cr Film (Dt2b)(1X100) 10X12 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 11X14 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 14X17 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 8X10 (Isi/Iso/Ce Certified) , Agfa X-Ray Cassette Without I.P 10X12 (Isi/Iso/Ce Certified) , Agfa X-Ray Cassette Without I.P Size 14X17 (Isi/Iso/Ce Certified) , Airway Set Size 2, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 3, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 4, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 5, ( Single Unit) (Isi/Iso/Ce Certified) , Alcohol Swabs A Pack Of 1X100 Saturated With 70% Isopropyl Alcohol Celloluse Swab , Ambu Bag Adult, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 7 K Pa ( 70 Cm H2o Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 1300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Neonates, It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Ped, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 4 K Pa ( 40 Cm H2o Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Anterior Chamber Kellmann Multi Flex 4 Point Fixation Type Optical Diameter 6Mm,Overall Length 12.5 Mm, Dioptric Range 10D To 30 D (Isi/Iso/Ce Certified) , Anterior Chamber Pmma Iol Optical Diameter 5.25Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range 10 D To 30 D ( Appaswamy) , Anterior Chamber Pmma Iol Optical Diameter 6 Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range 10 D To 30 D ( Appaswamy) , Aprons (Lab Coats ) (Small) Full Sleeves , Aprons (Lab Coats ) (Small) Half Sleeves , Aprons (Lab Coats) (Large) Full Sleeves , Aprons (Lab Coats) (Large) Half Sleeves , Aprons (Lab Coats) (Medium) Full Sleeves , Aprons (Lab Coats) (Medium) Half Sleeves , B.P. Blade 23 No. (Isi/Iso/Ce Certified) , Bain Circuit Adult (Isi/Iso/Ce Certified) , Bain Circuit Pediatric (Isi/Iso/Ce Certified) , Band Aid (Regular) (Isi/Iso/Ce Certified) , Band Aid (Regular) (Jhonson & Jhonson) , Bakri Ballon Tamponade , Bakri Ballon Catheter , Bb Splint (Bohler- Braun) (Isi/Iso/Ce Certified) , Bed Sheet Size-150 X 240 Cm, All Colours , Bed Sheet Size-150 X 240 Cm, Color:Blue , Bed Sheet Size-150 X 240 Cm, Color:Green , Bed Sheet Size-150 X 240 Cm, Color:Indigo , Bed Sheet Size-150 X 240 Cm, Color:Orange , Bed Sheet Size-150 X 240 Cm, Color:Peach , Bed Sheet Size-150 X 240 Cm, Color:Violet , Bed Sheet Size-150 X 240 Cm, Color:White , Bed Sheet Size-150 X 240 Cm, Color:Yellow , Blades For Eye Surgery 2.2 Mm (Crescent) ( Appasamy)) , Blades For Eye Surgery 2.8 Mm (Keratome) ( Appasamy) , Blades For Eye Surgery 3.0 Mm ( Appasamy) , Blades For Eye Surgery 3.2 Mm ( Appasamy)) , Blades For Eye Surgery 2.6 Crescent ( Appasamy)) , Blades For Eye Surgery Implant 5.2 Mm ( Appasamy)) , Blades For Eye Surgery Side Port 15° ( Appasamy)) , Blankets,Red Standared Wt. And Size (Isi/Iso/Ce Certified) , Blood Bag Paed. 100Ml ( Romsons) , Blood Bag Paed. 100Ml (Isi/Iso/Ce Certified) , Blood Collecting Safety Syringe ( (Isi/Iso/Ce Certified)) , Blood Filter Set With Air Vent(Double Chamber) (Isi/Iso/Ce Certified) , Blood Filter Set With Air Vent(Double Chamber) (Romsons) , Cancellous Full Thread 6.5 ( (Isi/Iso/Ce Certified)) , Cassette Holding Tray (20-25 Cassette Holding Capacity) ( (Isi/Iso/Ce Certified)) , Catgut Suture (Chromic Catgut)Usp 1, 76 Cm X 63 Mm, 3/8 Circle ( (Isi/Iso/Ce Certified)) , Cautery Pad , Chest Drain (Adults) ( (Isi/Iso/Ce Certified)) , Chest Drain Bag ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 12 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 14 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 28 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 32 ( (Isi/Iso/Ce Certified)) , Chest Tube Drainage With Trocar And Cannula ( (Isi/Iso/Ce Certified)) , Chest Tube With Underseal Bag 32 ( (Isi/Iso/Ce Certified)) , Cord Clamp ( (Isi/Iso/Ce Certified)) , Corugated Drain Sheet ( (Isi/Iso/Ce Certified)) , Cotton Bandages 10 Cm X 4 Mtrs(Isi Standard , Iso9001 &Gmp Certified) Rate Per Single Bandage , Cotton Bandages 15 Cm X 5 Mtrs(Isi Standard ,Iso9001& Gmp Certified)Rate Per Single Bandage , Cotton Bandages 5 Cm X 4 Mtrs(Isi Standard ,Iso 9001 & Gmp Certified)Rate Per Single Bandage , Cotton Gauze Cloth 90 Cm X 18 Mtrs(Isi Standard , Iso9001 &Gmp Certified)Rate Per Single Bandage , Cotton Pad 4 Packed Isi Marked ,Iso9001& Gmp Certified , Cotton Pad 6 Packed Isi Marked ,Iso9001& Gmp Certified , Cotton Wool Ip 100 Gm(Fine Absorbable Quality Sterlize) Nett Weight Iso9001& Gmp Certified , Cotton Wool Ip 500 Gm(Fine Absorbable Quality Sterlize) Nett Weight Iso9001&Gmp Certified , Courtery Lead ( Single Unit) ( (Isi/Iso/Ce Certified)) , Coutery Pad (Single Unit) ( (Isi/Iso/Ce Certified)) , Cpd Bag Double With Sagm 450 Ml ( (Isi/Iso/Ce Certified)) , Cpd Bag Double With Sagm 450 Ml ( Romsons) , Cpda Bag/ Blood Begs 350Ml ( (Isi/Iso/Ce Certified)) , Cpda Bag/ Blood Begs 350Ml ( Romsons) , Craner Wire Splint ( (Isi/Iso/Ce Certified)) , Crape Bandages Bp 10 Cm X 4.5 Mtrs ( (Isi/Iso/Ce Certified)) Rate Per Single Bandage , Crape Bandages Bp 15 Cm X 4.5 Mtrs(Isi Standard, Iso 9001&Gmp Certified )Rate Per Single Bandage , Dark Glasses , Dead Body Cover Size - 06 Feet Full Size , Developer For X-Ray To Make 13.5 Ltr. Solution ( (Isi/Iso/Ce Certified)) , Diaper Paediatric , Diaper Neonate , Didecyidimethyl Amonium Chloride And Benzyl C12c16 Alkyl Methyl Chloride Solution Presaturated Wipes ( (Isi/Iso/Ce Certified)) , Dispo Face Shield ( (Isi/Iso/Ce Certified)) , Disposable Adhesive Cannula Fixator (Iso 9001&Gmp Certified) , Disposable Bed Sheet , Disposable Cap With Elastic ( (Isi/Iso/Ce Certified)) , Disposable Eye Patch ( (Isi/Iso/Ce Certified)) , Disposable Eye Sticking Pad (Attached Multilayered) ( (Isi/Iso/Ce Certified)) , Disposable Eye Sticking Pad (Attached Multilayered) ( Appaswamy) , Disposable Insulin Syringe (31G) ( (Isi/Iso/Ce Certified)) , Disposable Mask With Strings ( (Isi/Iso/Ce Certified)) , Disposable Needle No. 16 ((Isi/Iso/Ce Certified) ) , Disposable Needle No. 21 No. ( (Isi/Iso/Ce Certified) , Disposable Needle No. 23(Isi/Iso/Ce Certified) , Disposable Needle No. 24 (Isi/Iso/Ce Certified) , Disposable Needle No. 26 (Isi/Iso/Ce Certified) , Disposable Nitrile Gloves 6.5 No. ( (Isi/Iso/Ce Certified)) , Disposable Nitrile Gloves 7 No. ( (Isi/Iso/Ce Certified)) , Disposable Nitrile Gloves 7.5 No ( (Isi/Iso/Ce Certified)) , Disposable Patient Drape Sheets ( (Isi/Iso/Ce Certified)) , Disposable Patient Drape Sheets ( Romsons) , Disposable Plastic Bed Pan ( (Isi/Iso/Ce Certified)) , Disposable Plastic Dropper (Capacity 3Ml)( (Isi/Iso/Ce Certified)) , Disposable Plastic Urine Pot ( (Isi/Iso/Ce Certified)) , Disposable Shoe Cover ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 6.5 ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 7 ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 7.5 ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6.5 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6.5 No ( Surgicare) , Disposable Surgical Gloves 7 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 7 No ( Surgicare) , Disposable Surgical Gloves 7.5 No ( (Isi/Iso/Ce Certified)) , Disposable Syringe 20 Ml With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringe 50 cement concrete With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 1 Ml (23G) ( (Isi/Iso/Ce Certified)) Ribbon Pack , Disposable Syringes 1 Ml With 26 No. Needle ( (Isi/Iso/Ce Certified))Ribbon Pack , Disposable Syringes 50 Ml. With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 10 Ml. With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 23 No. Needle ( Romsons) , Disposable Syringes 2 Ml With 24 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 24 No. Needle ( Romsons) , Disposable Syringes 3 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 3 Ml With 24 No. Needle (( Romsons) , Disposable Syringes 5 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 5 Ml With 23 No. Needle ( Romsons) , Double Blood Bags 350 Ml , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color ( (Isi/Iso/Ce Certified)) , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color ( Romsons) , Drapes With Drainage Bag 100X80 Cm Double Layered Pre Cut ( (Isi/Iso/Ce Certified)) , Draw Sheet/ Ot Sheet, 2 Mtr , Dyna Plast Adhesive Tape ( 10 Cm Width, 5 Cm Length) Isi Marked &Gmp Certified , Ecg Electrodes (Neonate) ( (Isi/Iso/Ce Certified)) , Ecg Electrodes Adult (Disposable Kit Pack Of 6) ( (Isi/Iso/Ce Certified)) , Ecg Electrodes Pediatric (Disposable Kit Pack Of 6) ( (Isi/Iso/Ce Certified)) , Ecg Paper 50 Mm*20 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 50 Mm*30 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 60 Mm* 15 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 80Mm*15,20,30Mtr Roll ( (Isi/Iso/Ce Certified)) , Ecg Roll Big ( (Isi/Iso/Ce Certified)) , Ecg Roll Small ( (Isi/Iso/Ce Certified)) , Ecg Paper 215 Mm*20 Mtr, Roll (Bionet Cardiocare-2000 Model) , Ecg Paper A4 Size (Edan Machine) , Ecg Paper Recording Paper 210 Mm*20 Mtr, Roll (Bpl Cardiart-9108 Model) , Ecg Paper Recording Paper 210 Mm*300Mm*200 Sheet ( Bpl Machine Model -Cardiart 9108) , Endotrocheal Tube 2 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 2.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 3 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 6.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7 Cuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7.5 Cuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 3.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 4 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 5 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 5.5 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 6 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 8 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube( All Sizes) Cuffed (Iso9001, Ce Marked& Gmp Certified) , Endotrocheal Tube( All Sizes) Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Epidural Set , Eustachian Tube Cathetor ( (Isi/Iso/Ce Certified)) , Eustachian Tube Cathetor ( (Isi/Iso/Ce Certified)) , Examination Gloves All Sizes (Wt Min. 4.5 Gm Per Piece) ( (Isi/Iso/Ce Certified)) , Eye Drapes (Sheet) 80X70 Cm Pre Cut (Romsons) , Eye Drapes (Sheet) 80X70 Cm Pre Cut (Appasamy) , Eye Drapes (Sheet)100X80 Cm Pre- Cut (Romsons) , Eye Drapes (Sheet)100X80 Cm Pre- Cut (Appasamy) , Eye Wipes (Sterilized) ( (Isi/Iso/Ce Certified)) , Fixer For X-Ray To Make 13.5 Ltr. Solution ( (Isi/Iso/Ce Certified)) , Fluorescein Strips For Eye ( Appaswamy) , Foleys Catheter 10 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 12 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 14 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 16 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 18 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 8 ( (Isi/Iso/Ce Certified)) , Fuji X-Ray Films 10X12 Dry ( (Isi/Iso/Ce Certified)) A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 11X14 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 14X17 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 8X10 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Green Blade 45 Degree ( Appaswamy) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 15.5 Cm X 8.5Cm (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 25 Cm X 10 Cm , (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 6.5 Cm X 5 Cm (Pack Of 100) , Guide Wire Teflon Coated V Straight Tip ( (Isi/Iso/Ce Certified)) , Gulde Wire For Interlocking/Dhs ( (Isi/Iso/Ce Certified)) , Hard Cervical Collar (Universal) Size (Isi/Iso/Ce Certified) , Hydro Dissection Cannula 26 No ( (Isi/Iso/Ce Certified)) , Hydro Dissection Cannula 27 No ( (Isi/Iso/Ce Certified)) , Hydrodisection Cannula ( (Isi/Iso/Ce Certified)) , Hydrophobic Acrylic Foldable Iols ( Aciol)In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +1.0 Ds To +30 Ds ( Appasamy) , I.V. Cannula 16 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 18 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 20 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 22 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 24 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 26 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 28 ( (Isi/Iso/Ce Certified)) , I.V. Flow Regulator Extension Sets ( (Isi/Iso/Ce Certified)) , I.V.Sets Disposable With Air Vent ( (Isi/Iso/Ce Certified)) , I.V.Sets Disposable With Air Vent ( Romsons) , Infant Feeding Tube 4 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 5 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 6 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 7 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 8 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 9 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube All Sizes ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube All Sizes (Iso9001, Ce Approved& Gmp Certified)) , K-90 Catheter ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula All Sizes, Single Unit (Iso 9001,Ce Approved& Gmp Certified) , Karman/ Mtp Cannula No. 6, Single Unit ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula No. 7, Single Unit ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula No. 8, Single Unit ( (Isi/Iso/Ce Certified)) , Kellys Pad (Isi/Iso/Ce Certified) , Kurta, Petticoat Sets Large Size , Green Strip , Lacrymal Cannula ( (Isi/Iso/Ce Certified)) , Lacrymal Cannula ( Romsons) , Lead Goggle ( (Isi/Iso/Ce Certified)) , Leuco Reduction Blood Filter Set For Blood Bank Use , Legaclip Size Lt 300 ( (Isi/Iso/Ce Certified)) , Legaclip Size Lt 400 ( (Isi/Iso/Ce Certified)) , Legging Each Leg Poplin 40 X 40 Cms. Green Color Bottom Closed , Lense Cleaner Paper ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 16G X 1.5 (1.6 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 18G X 1.5 (1.25 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 21G X 1.5 (0.8 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 15 Cm X 15 Cm (3 Foils In Each Box) ( (Isi/Iso/Ce Certified)) , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 6 Cm X 11 Cm (3 Foils In Each Box) ( (Isi/Iso/Ce Certified)) , Malicoat Catheter 4 Wings ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 10X12 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 12X15 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 14X14 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 14X17 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 8X10 ( (Isi/Iso/Ce Certified)) , Mekentosh Rubber Per Meter (Iso9001& Isi Standard) , Merocel Nasal Dressing 10 cement concrete ( (Isi/Iso/Ce Certified)) , Merocel Nasal Dressing 8 cement concrete ( (Isi/Iso/Ce Certified)) , Micro Drip Set(Iso9001,Ce&Gmp Approved) , Micropore 1/2 ( (Isi/Iso/Ce Certified)) , Micropore/Surgical Paper Tape 25Mm X 9.1Mtr.(Iso,Ce& Gmp Certified) , Micropore/Surgical Paper Tape 50Mm X 9.1 Mtr.(Iso9001,Ce& Gmp Certified) , Micropore/Surgical Paper Tape 75Mm X 9.1 Mtr.(Isi/Iso/ Ce Marked) , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 5X 6 Cm ( (Isi/Iso/Ce Certified)) , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 7X 9 Cm ( (Isi/Iso/Ce Certified)) , Mr Cannula All Sizes ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 5 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 6 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 7 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 8 ( (Isi/Iso/Ce Certified)) , Mucous Suction Trap ( (Isi/Iso/Ce Certified)) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 10Cm X 15 Cm Oval (1 Foil In Each Box) For Lap Of Hernia ( (Isi/Iso/Ce Certified)) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 15Cm X 15 Cm Square (1 Foil In Each Box) For Lap Of Hernia ( (Isi/Iso/Ce Certified)) , N-95 Masks ( (Isi/Iso/Ce Certified)) , Nasal Prongs (Paeditric) ( (Isi/Iso/Ce Certified)) , Nasal Prongs (Neonantal) ( (Isi/Iso/Ce Certified)) , Nasal Prongs Term & Preterm Single Patient Use With Twin Bore Nasal Pronges Sets, Extra Soft Medical Grade Nasal Tips ( (Isi/Iso/Ce Certified)) , Nebulisation Set (Mask With Tubing With Chamber (Adult ) ( (Isi/Iso/Ce Certified)) , Nebulisation Set (Mask With Tubing With Chamber (Paediatric ) ( (Isi/Iso/Ce Certified)) , Negative Suction Catheter ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No. 16 ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No.14 ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No.18 ( (Isi/Iso/Ce Certified)) , Niv Mask (Vented With Full Face Mask) , Nrm Mask With Reservior Bag( (Isi/Iso/Ce Certified)) , Nsv Set ( (Isi/Iso/Ce Certified)) , Opsite Eye Drape Sheet 70 Cm X 70 Cm ( (Isi/Iso/Ce Certified)) , Opsite Eye Drape Sheet 70 Cm X 70 Cm ( Appasamy) , Ortho Cotton Roll 15Cmx3mm ( (Isi/Iso/Ce Certified)) , Ot Gown Poplin Length 130 X 135 Cms ArmS Length 58 X 60 Back Open Type With Provision Of Tying With String At Back Arm Should Have Elasting Cuff Or Cord For Tying At Cuff End. The Inside Of Gown Should Be Inter Lock So That There Are No Loose Threads ( (Isi/Iso/Ce Certified)) , Ot Linen Cotton White 88X88 Cm. With Hole Size 9 X 10 Cm. In Centre And Should Be Folded And Stitched So There Are No Loose Ends. ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 130 X 180 (With Circular Hole Of Size 10 Diameters In Centers Green Color) ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 140 X 210 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 140 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 140 (With Circular Hole Of Size 10 Diameters In Centers Green Color) ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 90 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 90 (With Oval) ( (Isi/Iso/Ce Certified)) , Ot Sponges With Radio-Opaque Thread (With 8 Layers 30 Cm X 30 Cm ) ( (Isi/Iso/Ce Certified)) , Oxygen Connector Both Side Tube ( (Isi/Iso/Ce Certified)) , Oxygen Mask Adult ( (Isi/Iso/Ce Certified)) , Oxygen Mask Medium ( (Isi/Iso/Ce Certified)) , Oxygen Mask Ped. ( (Isi/Iso/Ce Certified)) , Oxygen Tubing, Suction Tubing (Different Colours) ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Adult ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Medium ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Paed. ( (Isi/Iso/Ce Certified)) , Paraffin Gauze , Patient Identification Band Adult Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Patient Identification Band Mother & Child Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Patient Identification Band Paediatric Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Pciol- Non-Foldable (All Powers As Per Requirement) (Appasamy) , Pedeatrics Iv Drip Set With Air Vent ( (Isi/Iso/Ce Certified)) , Pedia Set ( (Isi/Iso/Ce Certified)) , Picc Line 24 G, 28 G ( (Isi/Iso/Ce Certified)) , Pillow Cover Cotton Size:48 X 70 Cm, Color - Blue , Pillow Cover Cotton Size:48 X 70 Cm, Color - Green , Pillow Cover Cotton Size:48 X 70 Cm, Color - Indigo , Pillow Cover Cotton Size:48 X 70 Cm, Color - Orange , Pillow Cover Cotton Size:48 X 70 Cm, Color - Peach , Pillow Cover Cotton Size:48 X 70 Cm, Color - Violet , Pillow Cover Cotton Size:48 X 70 Cm, Color - White , Pillow Cover Cotton Size:48 X 70 Cm, Color - Yellow , Plaster Of Paris Bandages 10 Cm X 2.7 Mtrs ( (Isi/Iso/Ce Certified)) High Strength , Plaster Of Paris Bandages 15 Cm X 2.7 Mtrs ( (Isi/Iso/Ce Certified)) High Strength , Plaster Spatula ( (Isi/Iso/Ce Certified)) , Pmo Line ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body ( (Isi/Iso/Ce Certified)) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle ( (Isi/Iso/Ce Certified)) , Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting ( (Isi/Iso/Ce Certified)) , Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied ( (Isi/Iso/Ce Certified)) , Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +1.0 Ds To +30 Ds ( Appasamy)) , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +1.0 D To +30 D ( Appasamy) , Ppe Kits ( (Isi/Iso/Ce Certified)) , Prolene Mesh 3X6 ( (Isi/Iso/Ce Certified)) , Prolene Mesh 4X6 ( (Isi/Iso/Ce Certified)) , Prolene Mesh 6X6 ( (Isi/Iso/Ce Certified)) , Quadruple Blood Bags 450 Ml ( (Isi/Iso/Ce Certified)) , Reverse Pervention Syringe 10 Ml 3 Pc. ( (Isi/Iso/Ce Certified)) , Reverse Pervention Syringe 5 Ml 3 Pc. ( (Isi/Iso/Ce Certified)) , Ryles Tube 10 ( (Isi/Iso/Ce Certified)) , Ryles Tube 12 ( (Isi/Iso/Ce Certified)) , Ryles Tube 14 ( (Isi/Iso/Ce Certified)) , Ryles Tube 16 ( (Isi/Iso/Ce Certified)) , Ryles Tube 8 ( (Isi/Iso/Ce Certified)) , Ryles Tube All Sizes ( (Isi/Iso/Ce Certified)) , Sanitary Napkin ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 22 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 23 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 24 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 26 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. All Sizes ( (Isi/Iso/Ce Certified)) , Short G Sterile Single Use NeedleS 21G X 1.0 (0.8 X 25 Mm) ( (Isi/Iso/Ce Certified)) , Side Port 15 Degree (Antiglare) Green Blade (Appasamy) , Side Port 45 Degree (Antiglare) Green Blade (Appasamy) , Silk Sutupak (Non Absorable Black Braided Silk Suture) Usp 1, 2* 75 Mm , 1/2 Circle R B Needle ( (Isi/Iso/Ce Certified)) , Silk Sutupak Usp 1, 75 Cm ( (Isi/Iso/Ce Certified)) , Silk Suture Usp 0, 76Cm X 45 Mm , 3/8 Circle Type Of Needle- Reverse Cutting ( (Isi/Iso/Ce Certified)) , Silk Suture Usp 3-0, 90 Cm X 16 Mm , 3/8 Circle Type Of Needle- Cutting ( (Isi/Iso/Ce Certified)) , Silk Usp 4-0, With Cutting Needle ( (Isi/Iso/Ce Certified)) , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) ( (Isi/Iso/Ce Certified)) , Single Blood Bags 350 Ml ( (Isi/Iso/Ce Certified)) , Skin Stapler Standard ( Single Unit) ( (Isi/Iso/Ce Certified)) , Skin Traction Set Small Size ( (Isi/Iso/Ce Certified)) , Small Cotton Rolls For Isolation Isi/ Iso/Ce/Marked(Length-37Mm, Dia-8-10Mm) , Soft Roll Dressing (Cast Padding) 4 ( (Isi/Iso/Ce Certified)) , Soft Roll Dressing (Cast Padding) 6 ( (Isi/Iso/Ce Certified)) , Spc Set (Suprapubic Catheter Set) ( (Isi/Iso/Ce Certified)) , Spinal Needle 23 ( (Isi/Iso/Ce Certified)) , Spinal Needle 25 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 18 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 22 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 24 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 26 ( (Isi/Iso/Ce Certified)) , Sterile Cotton Pad Packed ( (Isi/Iso/Ce Certified)) , Sterile Gauze Piece Packed ( (Isi/Iso/Ce Certified)) , Sterile Single Use NeedleS 23G X 1 (0.6 X 25 Mm) ( (Isi/Iso/Ce Certified)) , Suction Catheter No. 10 , Single Unit ( (Isi/Iso/Ce Certified)) , Suction Catheter No. 16 , Single Unit ( (Isi/Iso/Ce Certified)) , Suction Cathetor No. 12 ( (Isi/Iso/Ce Certified)) , Suction Cathetor No. 14 ( (Isi/Iso/Ce Certified)) , Suction Plain Catheter No. , 8 Disposable Pyrogen Free ( (Isi/Iso/Ce Certified)) , Suction Plain Catheter No. 6, Disposable Pyrogen Free ( (Isi/Iso/Ce Certified)) , Suction Set ( (Isi/Iso/Ce Certified)) , Suction Tips (Different Sizes No: 2, 3, 4) ( (Isi/Iso/Ce Certified)) , Surgical Blades 21 ( (Isi/Iso/Ce Certified)) , Surgical Blades 24 ( (Isi/Iso/Ce Certified)) , Surgical Blades11 ( (Isi/Iso/Ce Certified)) , Surgical Blades15 ( (Isi/Iso/Ce Certified)) , Surgical Blades20 ( (Isi/Iso/Ce Certified)) , Surgical Blades23 ( (Isi/Iso/Ce Certified)) , Surgical Stiching Needle All Sizes (Doctor) ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Monofilament) 70 Cm X 31 Mm, Size -2-0, ½ Circle Round Bodied Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle ( (Isi/Iso/Ce Certified)) , Suture Catgut 2 No Round Body Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Coated Polyester No. 5 ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 26 Mm, Size -3-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 30 Mm, Size -2-0, 1/2 Circle Round Body Needle ,3 Metre ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -1-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 90 Cm X 30 Mm, Size -0, 1/2 Circle , Heavy Taper Cut Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) , Size -3-0, 1/2 Circle R B Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) ,1.5 Metre , 76 Cm X 16 Mm, Size -4-0, 3/8 Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) ,2 Metre , 90 Cm X 26 Mm, Size -3-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 2Metre , 90 Cm X 16 Mm, Size -3-0, 3/8 Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Nylon, Usp 1-0 , Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Nylon, Usp 2-0 , Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Tegaderm 2, 3/8 Inch*2.3/4 Inch 6*7 Cm Tegaderm Tm Films Iv Transparent Film Iv Transparent Film Dressing Style(Latex Free) ( (Isi/Iso/Ce Certified)) , Tegaderm Water Proof Dressing ( (Isi/Iso/Ce Certified)) , Temephos 50% Larvicide As Per Standard Of Latest Govt. Guidelines ( (Isi/Iso/Ce Certified)) , Thera Bands (All Colour) ( (Isi/Iso/Ce Certified)) , Three Way Canula , Towel 56 X 115 Cms. White Color, Soft , Full Size, Sperior Quality , Tracheostomy Tubes, Size 28 (Mettalic) ( (Isi/Iso/Ce Certified)) , Tracheostomy Tubes, Size 30 (Mettalic) ( (Isi/Iso/Ce Certified)) , Tracheostomy Tubes, Size 32 (Mettalic) ( (Isi/Iso/Ce Certified)) , Triple Blood Bags 450 Ml( (Isi/Iso/Ce Certified)) , Triple Blood Bags With Sagm 450 Ml ( (Isi/Iso/Ce Certified)) , Triple Layer Mask ( (Isi/Iso/Ce Certified)) , Triple Layer Single Piece Disposable Mask ( (Isi/Iso/Ce Certified)) , Triway (Three Way Stop Clock) Lipid Resistant Pyrogen Free, Sterile, Latex Free ( (Isi/Iso/Ce Certified)) , Ultrasound Jelly 200 Ml Bottle ( (Isi/Iso/Ce Certified)) , Umbilical Catheter No. 5, (5 Fr Length 37 Cm, -31Ml/Min Pvc ( (Isi/Iso/Ce Certified)) , Umbilical Catheter No. 6 (6 Fr Length 37 Cm, -31Ml/Min Pvc ( (Isi/Iso/Ce Certified)) , Umbilical Cord Cutting Scissor ( (Isi/Iso/Ce Certified)) , Uretheral Catheter ( R-90) , Under Pad/ Molinea Sheet , Urine Bag 2000Ml ( (Isi/Iso/Ce Certified)) Rate Of Single Piece , Uro Bag (Neonates)- 100 Ml ( (Isi/Iso/Ce Certified)) , Uro Bag (Paed.) ( (Isi/Iso/Ce Certified)) , Ventuary Mask ( (Isi/Iso/Ce Certified)) , Yankur Suction Set , Zigzag Ortho Cotton Soft Roll 4 Inches 100 Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 4 Inches 100 Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 6 Inches 100Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 6 Inches 300Gm.( (Isi/Iso/Ce Certified)) , Absolute Alcohol 70% 500Ml (Isi/Iso/Ce Certified)Rate Of One Bottle , Absolute Ethanol 99.9% Pure (Testing Solution) 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Acetone 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Albumin Kit 5X50ml (Isi/Iso/Ce Certified)Rate Of One Pack , Alkaline Phosphatase Kit Liquix-M 6X6 Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Amylase Kit 4*10Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Amylase Kit 6*6Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Anti A+B+D Igg/Igm+ Ab 4 X 12 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Reagents Anti-Ab Serum 1X5 Ml ( (Isi/Iso/Ce Certified)) , Anti Ab 1 X 10Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti Abd Kit 10 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti-A, Anti-B. Anti- D Sera A Pack Of 1X10 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti D Igg/Igm 1 X 10Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti D Anti Sera (Monocolonal) 1 X 5Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti-A1 (Lectin) Serum 1X5 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Antihuman Globulin Serum1x5 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Antibiotic Zone Scale , Aso Test 1X100 Test ( (Isi/Iso/Ce Certified))Rate Per Pack Of 100 , Aso Test Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Bacillocid (Dimethanol And Glutaraldehyde Conc.) Sterilization Slountion, 500Ml , Balance Salt Solution (Bss Solution For Eye) Clearsol 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Bilirubin Kit 4X60ml ( (Isi/Iso/Ce Certified))Rate Per Kit , Bio Medical Waste Dustbin Trolley With Frame 16 Litre (3 Bin Set) Ss Heavy Duty Frame (Isi/Iso/Ce Certified) , Bio Medical Waste Dustbin Trolley With Frame 16 Litre (4 Bin Set) Ss Heavy Duty Frame (Isi/Iso/Ce Certified) , Bio Medical Waste Dust Bin 10 Ltr Plastic (First) Body (Blue Black Yellow Red) ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 10 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 20 Ltr Plastic (First) Body (Blue Black Yellow Red) , Bio Medical Waste Dust Bin 20 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 32 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 50 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Waste Poly Bag Hd/Ldpe Bag As Per Bmw Rules 2016 Thickness More Than 50 Micron/200 Gz, Non-Chlorinated,Ist Quality/Fresh Material With Printing Bio Hazard Logo,Hospital Use And Haryana Govt Supply Not For Sale (Yellow, Red, Black, Blue) Size-14X17/19X26/25X38/24X24 All Sizes (Per Kg) , Bio Hazard Sticker 4.5X4 Cm. Rate Per Sticker , Bleaching Powder 1 Kg Packing Grade 1 (Isi/Iso/Ce Certified) Rate Of 1 Kg.,Shelf Life More Than 6 Months , Bleaching Powder 25 Kg Packing Grade 1 Hdpe Bag Powder Form Minimum Chlorine Availability 34% (Isi/Iso/Ce Certified) Rate Of 25 Kg. Bag ,Shelf Life More Than 6 Months , Bloating Paper For Lab Use ( (Isi/Iso/Ce Certified) Rate Per Bloating Paper , Blood Agar100gm( (Isi/Iso/Ce Certified) Rate Of 100 Gm Pack , Blood Culture Bottle 50 Ml (Isi/Iso/Ce Certified))Rate Of One Bottle , Blood Glucose Kit 2X200ml ( (Isi/Iso/Ce Certified) Rate Per Pack 2*200Ml , Blood Grouping Rapid Card ( (Isi/Iso/Ce Certified) Rate Per Card , Blood Lancet 1 X 50 ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 50 Lancets , Blood Lancet 1 X 100 ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Lancets , Blood Urea Kit 20Mlx5 ( (Isi/Iso/Ce Certified))Rate Per Kit , Borosil Reagent Bottle ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Bovine Albumin 22% Sol. A Pack Of 1X10 Ml( (Isi/Iso/Ce Certified))Rate Of One Pack , Brain-Heart Infusion Agar 100Gm ( (Isi/Iso/Ce Certified)) Rate Of 100 Gm. Pack , Brain-Heart Infusion Broth 100Gm ( (Isi/Iso/Ce Certified) Rate Of 100 Gm. Pack , Capillery Tubes For Bt/Ct A Pack Of 1X100 Rate Per Pack Of 100 Capillary Tubes , Carbol Fuschin Stain (Ziehl-Neelsen) Hi-Media , Carbol Fuchsin Powder 25 Gm (Isi/Iso/Ce Certified)) , Carbolic Acid 400Gm.(Isi/Iso/Ce Certified)) , Cedar Wood Oil 125 G ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Cefoxitin For Swab Culture Rate Per Unit , Cello Tape (White) Size- 2 Inch Rate Of Single Cello Tape , Cello Tape (Brown) Size- 4 Inch Rate Of Single Cello Tape , Chlorhexidine Gluconate 4% Spray 60Ml ( (Isi/Iso/Ce Certified) Rate Per 60Ml Pack , Chlorhexidine Gluconate+ Cetrimide Antiseptic Liquid 250 Ml Bottle ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Chlorine 0.5 Gm Pellets (Drinkwell) Packing 1000 Fda/ Iso/Gmp Certified , Rate Of 1000 Pellets, Shelf Life At Least One Year , Chocolate Agar 100Gm ( (Isi/Iso/Ce Certified) Rate Per Pack , Cholestrol Kit 5 X 20Ml ( (Isi/Iso/Ce Certified) Rate Per Pack , Citrate Medium 100Gm (Isi/Iso/Ce Certified) Rate Per Pack , Cleaning Solution Kit For Easylyte Na/K/Ck Rate Per Pack , Cled Medium 100Gm ( (Isi/Iso/Ce Certified) Rate Of 100Gm. , Coplin Jar Rate Of Single Jar , Copper Sulphate 500Gm ( (Isi/Iso/Ce Certified) Rate Of 500 Gm. Pack , Cover Slips Square A Pack Of 20X10 Gm Blue Star Rate Of Single Pack , Coverslip (English Glass) Size: 22 X 50Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Coverslip (English Glass) Size: 24 X 50Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Coverslip (English Glass) Size: 24 X 60Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Cpkmb Kit 2*8 /2*2 Ml( (Isi/Iso/Ce Certified)) Rate Per Pack , Creatinine Kit 4X60ml ( (Isi/Iso/Ce Certified))Rate Per Pack , Crom Agar 100Gm( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Kit 1X10 Ml ( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Kit Slide Method Qualitative ( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Rapid Card ( (Isi/Iso/Ce Certified)) Rate Per Card , Crystal Violet 100 Gm. , Culture Tube With Swab Stick Rate Per Culture Tube With Swab Stick , Cyphenothrin 5% Ecs (Insecticide/Adulticide For Fogging) As Per Govt Guidelines 1 Litre (Bayer) , Decalcifying Reagent ( (Isi/Iso/Ce Certified)) , Deltamethrin 2.5%, Wp 25 Kg , Dengue Elisa Kit 48 Test ( Isi/Iso/Ce Certified))Rate Per Pack , Dengue Elisa Kit 48 Test J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Dengue Elisa Kit 48 Test ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) Rate Per Pack , Dengue Elisa Kit 96 Test ( (Isi/Iso/Ce Certified)) , Dengue Elisa Kit 96 Test ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Per Pack , Dengue Elisa Kit 96 Test J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Dengue Rapid Test Card Ns1 (Single Test) ( (Isi/Iso/Ce Certified)) Rate Per Card , Diamond Pencil Marker Standard Quality Rate Per Piece , D - Dimer Vial (Isi/Iso/Ce Certified) , Distilled Water (Dionised) 1 Litre ( (Isi/Iso/Ce Certified))Rate Per Pack , Distilled Water (Zero Tds) 5 Litre ( (Isi/Iso/Ce Certified))Rate Per Pack , Dpx Mounting Media 250Ml Each , Dropping Bottle 100Ml ( (Isi/Iso/Ce Certified)) , Dropping Bottle 250Ml ( (Isi/Iso/Ce Certified)) , Dodecylbispropylene Triamine 9.2Gm, Didecyldimethyl Ammonium Chloride 13.0 Gm For Fogging (Isi/Iso/Ce Certified) , Durhams Tube A Pack Of 1X100 Rate Per Pack , Drumsticks (Isi/Iso/Ce Certified) , Edta 17% Paste Form ( (Isi/Iso/Ce Certified)) , Eeg Paste , Elisa Covid -19 Kit A Pack Of 96 Tests (As Per Icmr/ Niv) (Isi/Iso/Ce Certified)) Rate Per Pack , Elisa Covid -19 Kit A Pack Of 48 Tests (As Per Icmr/ Niv) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Elisa Hbv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hbv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hbv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hbv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hcv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hcv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hcv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hcv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hiv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hiv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hiv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hiv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Eosin Powder 1X25 Gm. Rate Per Pack (Isi/Iso/Ce Certified) , Esr Pipette Rate Per Pipette (Isi/Iso/Ce Certified) , Ethanol Spray 70% , Fields Stain ( (Isi/Iso/Ce Certified)) , Filter Paper (Whatman)(A Pack 1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Filter Paper (Whatman)(A Pack 1X50) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Filter Paper No. 1 (A Pack 1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Fluorescein Stain ( (Isi/Iso/Ce Certified)) , Fobt Card ( (Isi/Iso/Ce Certified) Rate Per Card , Formalin Solution 37-40% Buffered 500Ml ( (Isi/Iso/Ce Certified)) Rate Of One Bottle , Formalin Solution 37-40% Buffered 5 Litre ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Funnel 3 Inch ( (Isi/Iso/Ce Certified))Rate Of One Funnel , GeimsaS Stain Solution Bottle ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Giemsa Stain ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glacial Acetic Acid 3.5% Solution 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glass Beaker 50 Ml (Borosil) Rate Of Single Beaker , Glass Beaker 100 Ml (Borosil) Rate Of Single Beaker , Glass Beaker2 50 Ml (Borosil) Rate Of Single Beaker , Glass Beaker 500 Ml (Borosil) Rate Of Single Beaker , Glass Funnel (Borosil) Rate Of Single Funnel , Glass Cleaner 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glass Slide Cabinet (1000 Slide Storage Capacity) ( (Isi/Iso/Ce Certified)) , Glass Slides , A Pack Of 50 Slides ( (Isi/Iso/Ce Certified)) Rate Of 50 Slides Pack , Glutraldehyde Solution 2 % - 2.5 %, 1 Ltr (Isi/Iso/Ce Certified) , Glucometer (Dr.Morpen ,Model-Bg03) , Glucometer Strips (Dr.Morpen ,Model- Bg03) ( Rate Per Strip) , Glucometer Cell (Dr.Morpen ,Model-Bg03) , Glucometer (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) , Gluco Strips (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) ( Rate Per Strip) , Glucometer Cell (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) , Glucometer (Accu Chek) , Gluco Strips (Accu Chek) A Pack Of 2X50 Strips ( Rate For Pack Of 2X50 Strips) , Glucometer Cell (Accu Chek) , Glycerol 100Ml (Isi/Iso/Ce Certified) , Graduated Glass Measuring Cylinder ( 1000Ml) ( (Isi/Iso/Ce Certified)) , Graduated Glass Measuring Cylinder (500Ml ) ( (Isi/Iso/Ce Certified)) , Gram Stain 100Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Gram Stain Kit ( (Isi/Iso/Ce Certified) Rate Of One Kit , Gram Stain Kit ( Hi-Media))Rate Of One Kit , Hand Sanitizer 400 Ml (Isi/Iso/Ce Certified) , H& E Stain (Harris) Powder Hi-Media Rate Of One Pack , Haemoglobin Meter (Round) Manual ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter (Sqaure) Manual ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter Glass Tube (Round) ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter Glass Tube (Sqaure) ( (Isi/Iso/Ce Certified)) , Haemostatic Tournique (Isi/Iso/Ce Certified) , Hav Card ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hb Meter Digital Portable With One Year Replacement Warranty ( Sensa Core) , Hb Meter Strips (Sensa Core Hb Digital Portable Meter ) Rate Per Strip , Hb Meter Digital Portable With One Year Replacement Warranty (Mission) , Hb Meter Strips ( Mission) Rate Per Strip , Hb Pipette ( (Isi/Iso/Ce Certified))Rate Of One Pipette , Hba1c Turbosmart ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag + Hiv + Hcv Rapid Card (Combo) ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag 96 Test Elisa ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Hbsag 96 Test Elisa ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor )) Rate Of One Kit , Hbsag Card ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag Card ( Aspen) Rate Of One Card , Hbsag Tridot Rapid Card ( J.Mitra)) Rate Of One Card , Hbsag Card Extra Sensitive ( (Isi/Iso/Ce Certified)) , Hcl N/10 500Ml ( (Isi/Iso/Ce Certified)) Rate Of One Bottle , Hcl Concentrated 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Hcv & Hiv Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Rapid Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Rapid (Single Test Card) ( Aspen))Rate Of One Card , Hcv Tridot ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Tridot ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Of One Card , Hcv, Hiv, Hbsag, Syphilis Card 4 In 1 ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv 1/2 Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Card Retroquic Flow Through Method ( (Isi/Iso/Ce Certified)) , Hiv Rapid (Single Test Card) ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Rapid (Single Test Card) ( Aspen))Rate Of One Card , Hiv Tridot ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Tridot ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Of One Card , Hiv Complete Safe Kit ( (Isi/Iso/Ce Certified))Rate Of One Safe Kit , Hiv+Syphillis Combo ( (Isi/Iso/Ce Certified)) , Holder Lancet (Single Use/Single Packing)) ( (Isi/Iso/Ce Certified))Rate Of One Holder Lancet , Ice Gel Pack 100Gram Rate Of Single Ice Gel Pack , I.O Dye (Rhex Id Dye) Each (Indigo Blue Dye)Rate Of Single Dye , Immersion Oil For Microscopy, 100X Lens (Heavy Grade) A Pack Of 30Ml(( (Isi/Iso/Ce Certified))Rate Of One Pack , Immersion Oil For Microscopy, 100X Lens A Pack Of 30Ml (Hi-Media))Rate Of One Pack , Isopropyl Alcohol 500 Ml For Lab Use ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Isopropyl Alcohol Based Handwash Solution 5 Ltr. , Isopropyl Alcohol Based Handwash Solution 500 Ml , Jsb Stain I 250Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Kimberlay Clark Tissue Paper Rate Of One Packet , Lead Pencil / Cautery Pencil (Isi/Iso/Ce Certified) , Leishman Stain ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Liquid Hand Wash Soap 5 Litre (Safe For Skin)Isi/Iso/Gmp Certified , Macconkey Brouth 500Gm (Purple) Rate Of Pack 500Gm. , Macconky Agar 100Gm ( (Isi/Iso/Ce Certified))Rate Of Pack 100Gm. , Malicot Tube 28 No. Rate Of One Tube (Isi/Iso/Ce Certified) , Malaria Antigen Card (Isi/Iso/Ce Certified))Rate Of One Card , Malaria Antigen Card J.Mitra ( (Isi/Iso/Ce Certified))Rate Of One Card , Malaria Parasite Kit ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Malaria Pcr Kit Himedia( (Isi/Iso/Ce Certified)) Rate Of One Kit , Malaria Pan Elisa 96 Test ( (Isi/Iso/Ce Certified)) Rate Of One Kit Of 96 Tests , Malathion 50% Ec, 1 Ltr (Isi/Iso/Ce Certified) , Malathion Technical 95%, 25 Kg (Isi/Iso/Ce Certified) , May Grunwald Stain Solution Bottle 125Ml( (Isi/Iso/Ce Certified))Rate Of One Bottle , Mct Rack ( (Isi/Iso/Ce Certified)) , Methanol 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Methylene Blue Alkaline ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Mgg Stain ( (Isi/Iso/Ce Certified)) , Micro Centrifuge Tube 2Ml Sterile A Pack Of 1X500 (Tarson ) Rate Per Pack Of 500 , Microcuvettes (Model- Haemocue Hb 301, Hb Meter), ( Rate Per Single Microcuvettes) , Micro Pipette 0- 50 Microlitre ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipette 10 Ul To 100 Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipette 2 Ul To 20 Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipettes 20Ul To 200Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Slides ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Microscope Optical Lens Cleaning Solution ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Microtips (2 Ul-200 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Of One Pack Of 1000 , Microtips 0 - 200 Microliters (Small) A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips 20 - 1000 Microliters (Large)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips 200 Ul To 1000 Ul A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips Box (2 Ul-200 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Of Per Pack Of 1000 , Microtips Box (200 Ul-1000 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Mi-Fog(Disinfectant Liquid For Fogging Machine) Benzalkonium Chloride 13.6%W/V,Didecyl Dimethyl Ammonium Chloride 13%W/V,Poly Hexa Methlene Biguanide Hcl 5.0%W/V, 5Th Generation Qac For Ot,Icu,Nicu& Other Critical Areas , 1 Litre , Mineral Trioxide Aggregate Isi/ Iso/Ce/Marked. Rate Of One Pack , Mini-Shaker For Immunology ( (Isi/Iso/Ce Certified))Rate Of One Pack , Mx Vial (Montux Vial) Rate Per Vial , Muller Hilton Agar 100Gm ( (Isi/Iso/Ce Certified))Rate Of One Pack , Muller Hilton Agar Plate ( (Isi/Iso/Ce Certified))Rate Of One Plate , Multi Drug Test Kit (Panel Of 6) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (8 Channal) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (8 Channal Variable Value 2-20Ul) Thermo Fischer ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (12 Channal) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (12 Channal) Thermo Fischer ( (Isi/Iso/Ce Certified)) , Multidrug Test Kit Of 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Multidrug Test Card 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Of One Card , Multi-Sample Vacutainer Luer-Lok Access Adapters ( (Isi/Iso/Ce Certified)) , Multi-Sample Vacutainer Routine Blood Collection Sterile Single Use Needles (21G X 1Inch)(0.8 X 25/32Mm) ( (Isi/Iso/Ce Certified)) , Multi-Sample Vacutainer Routine Blood Collection Sterile Single Use Needles (22G X 1Inch)(0.7 X 25/32Mm) ( (Isi/Iso/Ce Certified)) , Nutrient Agar Media 100 Gm ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 100X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 10X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 40X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , O- Toludine Reagent (Isi/Iso/Ce Certified) A Pack Of 500Ml Rate Per Bottle , Pap Stain Kit (Isi/Iso/Ce Certified) Rate Per Kit , Pap Stain Kit J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor (Isi/Iso/Ce Certified) Rate Per Kit , Paraffin Wax Small Cubes ( (Isi/Iso/Ce Certified))Rate Of One Pack , Parafilm Width2 Inch & Length 250 Feet ( (Isi/Iso/Ce Certified))Rate Of One Pack , Paraldehyde Solution For Sterlization ( (Isi/Iso/Ce Certified))Rate Of One Pack , Pasteur Pipette(Transfer Pipette) Capacity 1Ml ( (Isi/Iso/Ce Certified)) , Peptone Water 100Gm ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Permanent Marker 10 Pieces Per Pack Black/Blue Colour Rate Per Pack , Petridish Diameter 90Mm* Height 15 Mm Sterile ( (Isi/Iso/Ce Certified)) Rate Of Single Unit , Ph Meter Digital ( (Isi/Iso/Ce Certified)) Rate Per Meter , Ph Paper (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 , Ph Testing Strips For Water Seven Quality Test (1X50) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 50 , Ph Testing Strips For Water Quality Test (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 , Phenol 2% A Pack Of 500 Ml (Isi/Iso/Ce Certified)) Rate Per Pack , Phenol 40% A Pack Of 5 Litre (Isi/Iso/Ce Certified)) Rate Per Pack , Phenol Crystal A Pack Of 500Gram (Isi/Iso/Ce Certified)) Rate Per Pack , Phenyl Surface Disinfectant,Floor Cleaner Liquid 5 Litre , White Colour ( (Isi/Iso/Ce Certified)) , Phenyl Surface Disinfectant,Floor Cleaner Liquid 5 Litre( Black Colour) ( (Isi/Iso/Ce Certified)) , Pipette Shaker ( (Isi/Iso/Ce Certified)) , Plaintube Glass 18*150 Mm, 27 Ml ( (Isi/Iso/Ce Certified)) Rate Of One Glass Tube , Plaintube Plastic 18*150Mm ,27 Ml( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plaintube Plastic ( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plastic Tube For Dengue Testing( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plastic Container For Storing Buffered Formalin 5Litres ( (Isi/Iso/Ce Certified)) , Plastic Spatula ( (Isi/Iso/Ce Certified)) , Plastic Cane 5 Litre White Rate Per Cane , Plastic Cane 5 Litre Black Rate Per Cane , Plastic Bottle 1 Litre For Tb Programme Rate Per Bottle , Plastic/ Glass Jars For Storage Of Specimens With Fixative (50Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (100Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (200Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (500Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (1000Ml Capacity) ( (Isi/Iso/Ce Certified)) , Platelet Diluting Fluid ( (Isi/Iso/Ce Certified)) , Potash Alum 1X500gm. Rate Per Pack , Podophylline Resin Solution 10% To 25% ( (Isi/Iso/Ce Certified)) , Pot. Dichromate ( (Isi/Iso/Ce Certified)) , Prefilled Automated Extraction Kits (For Thermo Scientifix For Kingfisher Flex Automated Extraction System ,96 Well) Rt-Pcr Lab , Pregnancy Test Kit ( (Isi/Iso/Ce Certified)) Rate Of Single Kit , Pregnancy Test Card ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Pregnancy Strips ( (Isi/Iso/Ce Certified)) Rate Of Single Strip , Pyrethrum Extract 2% (Isi/Iso/Ce Certified) , Q-Way 6 Inches ,Sterlized Using Ethylene Oxide ( (Isi/Iso/Ce Certified)) , R A Factor Rapid Card ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Ra Factor Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid Afb Stain Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid Antigen Test Card (Covid) ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Rapid Cytochrome/Modified Rapid Leishman Stain ( (Isi/Iso/Ce Certified)) , Rapid Geimsa Stain Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid H & E Stain Kit ( (Isi/Iso/Ce Certified)) , Rbc Diluting Fluid ( (Isi/Iso/Ce Certified)) , Ria Vials Glass 1X100(Isi/Iso/Ce Certified)) Rate Of 100 Vials Packing , Ria Vials Plastic 12X40mm 1X500(Isi/Iso/Ce Certified)) Rate Of 500 Vials Packing , Rpr/Vdrl Kit (50 Test Each) ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rpr/Vdrl Kit (100 Test Each) ( S D Biosensor)Rate Of Single Kit , Rubber Teats Rate Per Piece , Rubber Gloves For Lab Use Rate Per Pair , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) (Isi/Iso/Ce Certified) , S. Calcium Kit A Pack Of 2X50 Ml( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Cholesterol Kit A Pack Of 5X30ml ( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Phosphorus Kit A Pack Of 2X50ml( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Protein Kit 5X50 ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Salt Testing Kit ( (Isi/Iso/Ce Certified)) Rate Per Kit , Sample Cups With Lid & Sticker 30Ml ( (Isi/Iso/Ce Certified)) , Saturated Picric Acid Solution ( (Isi/Iso/Ce Certified)) , Sda Agar 100Gm ( (Isi/Iso/Ce Certified)) , Self Polymerizing Acrylic Liquid (Isi/Iso/Ce Certified) , Self Polymerizing Acrylic Powder (Isi/Iso/Ce Certified) Pink , Semen Diluting Fluid ( (Isi/Iso/Ce Certified)) , Serum Pti Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Serum Seperate Tube A Pack Of 1X100 Rate Per Pack , Sgot Kit 20Mlx05 ( (Isi/Iso/Ce Certified)) , Sgpt Kit 20Mlx05 ( (Isi/Iso/Ce Certified)) , Sharp Container 1.5 Litre, White ( (Isi/Iso/Ce Certified)) , Sharp Container 6 Litre, White ( (Isi/Iso/Ce Certified)) , Sharp Container 10 Litre, White ( (Isi/Iso/Ce Certified)) , Slide Mountant Dpx ( (Isi/Iso/Ce Certified)) , Slide Carrying Tray (20 Slide Capacity) ( (Isi/Iso/Ce Certified)) , Slide Labelling Stickers/Tape Roll ( (Isi/Iso/Ce Certified)) , Slide Staining Racks Aluminium( (Isi/Iso/Ce Certified)) , Slide Storage Box (100 Slide Capacity) ( (Isi/Iso/Ce Certified)) , Slide Tissue Adhesive(Hydophillic Slides) (Egg Albumin) ( (Isi/Iso/Ce Certified)) , Sodium Citrate 3.8% A Pack Of 500 Ml Rate Per Pack , Sodium Hypochloride 5% Solution 5 Ltr ( (Isi/Iso/Ce Certified)) , Sod. Hypochloride 400 Ml (Idc) , Sodium Hypochlorite Solution 10% 5 Ltr ( (Isi/Iso/Ce Certified)) , Sodium Phosphate Dibasic (Na2hpo4) Buffer ( (Isi/Iso/Ce Certified)) , Sodium Phosphate Monobasic (Nah2po4) Buffer ( (Isi/Iso/Ce Certified)) , Sodalime Crystal (Isi/Iso/Ce Certified) , Solution Pack For Easylyte Na/K/Cl , Spirit Lamp , Sulphuric Acid Con. 500 Ml ( (Isi/Iso/Ce Certified))Rate Per Bottle , Sulphuric Acid Solution 20% V/V (( (Isi/Iso/Ce Certified)) , Sulphur Powder 1X500gm. Rate Per Pack (Isi/Iso/Ce Certified) , Sputum Cup With Lid & Sticker 30Ml ( (Isi/Iso/Ce Certified)) , Sputum Cup With Lid 50Ml & Sticker ( (Isi/Iso/Ce Certified)) , Sputum Cup Carrier Box( (Isi/Iso/Ce Certified)) , Adhesive Label For Sputum Cup A Pack Of 1X100 Pieces , Surgical Spirit Bp 500Ml ( (Isi/Iso/Ce Certified)) Rate Per Bottle , Surgical Spirit Bp 5Ltr ( (Isi/Iso/Ce Certified))Rate Per Bottle , Sugar Sucrose A Pack Of 500Gm. (Isi/Iso/Ce Certified) , Sugar Maltose A Pack Of 500Gm.(Isi/Iso/Ce Certified) , Swab Sticks 100 Pcs. Rate Of 100 Sticks , Tcbs Agar100gm ( (Isi/Iso/Ce Certified)) , Tds Meter Digital , Rate Per Tds Meter , Test Tube Glass (150 X 16) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Glass (150 X 20) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Glass (80Mmx10mm) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Plastic Pack Of 1X48 Tubes ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Rack 18 Hole (Plastic)(Isi/Iso/Ce Certified) , Test Tube Rack 18 Hole (Ss)(Isi/Iso/Ce Certified) , Test Tube Rack 96 Test Plastic(Isi/Iso/Ce Certified) , Test Tube Rack 96 Test Ss(Isi/Iso/Ce Certified) , Test Tubes Brush (Isi/Iso/Ce Certified) , Thermal Printing Roll For Urine Analyzer And Cbc 57/58Mm Size , Thermol Roll 57Mm ,50Mm Rate Per Roll(Isi/Iso/Ce Certified) , Thermocol Box Size 18.5X12.5X13 Cm. , Thphoid (Igg + Igm) Card ( (Isi/Iso/Ce Certified)) Rate Per Card , Thphoid (Igm) Card ( (Isi/Iso/Ce Certified))Rate Per Card , Tissue Paper Roll Double Ply Length 30 Metres Width 30 10 Cm. Rate Of Single Roll , Tourniquet Superior Quality ( (Isi/Iso/Ce Certified)) Rate Per Piece , Triglyceride Kit 2X50ml Erba Rate Of Single Kit , Triple Sugar Iron Test (Tsi) 100Gm , Trop I Kit A Pack Of ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Troponin Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Tryptan Blue Dye ( (Isi/Iso/Ce Certified)) , Tubes Dispoables 12X100 Mm. A Pack Of 100 Tubes Rate Per Pack , Tube Racks (10 Ml Vials)(Isi/Iso/Ce Certified) , Tube Racks (5Ml Vials)(Isi/Iso/Ce Certified) , Tuberack 18*150 Mm (Isi/Iso/Ce Certified) , Turp Loop ( (Isi/Iso/Ce Certified))(Isi/Iso/Ce Certified) , Twin Bucket 10 Litre Grade One Plastic Body(Isi/Iso/Ce Certified) , Twin Bucket 20 Litre Grade One Plastic Body(Isi/Iso/Ce Certified) , Urease Medium 100Gm ( (Isi/Iso/Ce Certified)) , Uric Acid Kit 5X50ml ( (Isi/Iso/Ce Certified))Rate Of Pack , Urine Containers With Lid & Sticker (50Ml Capacity) ( (Isi/Iso/Ce Certified)) , Urine Containers With Lid & Sticker (50Ml Capacity) A Pack Of 1X100 Non-Sterile ( (Isi/Iso/Ce Certified)) Rate Of Pack , Urine Containers With Lid & Sticker 30Ml Non Sterile ( (Isi/Iso/Ce Certified) , Urine Containers With Lid & Sticker 30Ml Sterile ( (Isi/Iso/Ce Certified) , Urine Droppers 5 Ml ( A Pack Of 1X100) Rate Of Pack , Multisticks Urine Analysis Reagent Strips 2 Parameter(Albumin & Sugar) (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Multisticks Urine Analysis Reagent Strips 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Multisticks Urine Analysis Reagent Strips 10 Parameter Bayer ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Vaccuame Needle ( (Isi/Iso/Ce Certified)) , Vaccutainers Sodium Citrate 3.2% (2.7 Ml) (Non - Vaccum)A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Gel Yellow Cap,A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Lithium Heparin (Green Top) Tube (Non-Vaccum) 6 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Lithium Heparin (Green Top) Tube (Vaccum) 3 Mla Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Needle ( (Isi/Iso/Ce Certified)) , Vacutainer Needle Holder ( (Isi/Iso/Ce Certified)) , Vacutainer Safety-Lok Pediatric Blood Collection Set With Pre-Attached Holder ( (Isi/Iso/Ce Certified)) , Vacutainer Sodium Heparin (Green Top) Tube (Non-Vaccum) 3 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Sodium Heparin (Green Top) Tube (Non-Vaccum) 6 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Stretch Torniquet ( (Isi/Iso/Ce Certified)) , Vacutainer Tubes Purple/Lavender Topped (K2 Edta) 2 Ml Capacity (Size Of Tube:13 X 75Mm), Vaccum Based Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 0.5 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microtainer/Microcapillary/Mini Blood Collection Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 1 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microcapillary/Mini Blood Collection Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 1.3 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microcapillary/Mini Blood Collection Tube A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Edta (Non -Vaccum) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Edta (Vaccum Tubes) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Florides (Vaccum Tubes) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Plain /Clot Activator A Pack Of 1X100 (Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers (For Pus Collection) Rate Per Vacutainer(Isi/Iso/Ce Certified) , Vacutainers Plain /Clot Activator A Pack Of 1X100 ( Non-Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate (Vaccum Tubes, ) (For Esr 1.6 Ml)( Black Top) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.2% (2.7 Ml) (Vaccum Tubes) A Pack Of 1X100 (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.8% (Black Top)Vaccum Tube A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.8% (Black Top) Tube A Pack Of 1X100 ( Non-Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vdrl (Syphilis Kit Elisa 96 Test) ( (Isi/Iso/Ce Certified)) Rate Per Kit , Vdrl (Syphilis Kit Elisa 96 Test) (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Per Kit , Vdrl Strips A Pack Of 100 Strips (Isi/Iso/Ce Certified)) Rate Per Strip , Vdrl Rapid Card( (Isi/Iso/Ce Certified)) Rate Per Card , Vtm Kit With Oral And Nasal Swab Pair (As Per Icmr Guidelines) Rate Per Vtm Kit , Vtm Media Rate Per Single Piece , Vtm Vial Rack , Wash Bottles Glass 500Ml Rate Per Bottle , Wash Bottles Plastic 500Ml Rate Per Bottle , Water Sample Bottles Glass 250Ml Rate Per Bottle , Water Sample Bottles Glass (Borosil) 250Ml Rate Per Bottle , Water Sample Bottles Glass 500Ml Rate Per Bottle , Water Sample Bottles Glass (Borosil)500Ml Rate Per Bottle , Wbc Diluting Fluid 100 Ml ( (Isi/Iso/Ce Certified)) , White Petroleium Jelly 100 %20 Gm Jar( (Isi/Iso/Ce Certified)) , White Petroleium Jelly 100 % 500 Gm Jar( (Isi/Iso/Ce Certified)) , Widal Kit 5X4 Ml ( (Isi/Iso/Ce Certified))Rate Per Kit , Wooden Tips 6 A Pack Of 1X100 Rate Per Pack , Xylene 1X500ml ( (Isi/Iso/Ce Certified)) Rate Per Pack , Auto Analyser Thermal Paper Role (57 Mmx30m) (Erba) , Automated Extraction Kits (For Thermo Scientifix For Kingfisher Flex Automated Extraction System ,96 Well) Rt-Pcr Lab , Autoclave Biohazard Bag (12X24) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 1X100 , Autoclave Biohazard Bag (14X19) ( (Isi/Iso/Ce Certified) Rate Per Pack Of 1X100 , Autoclave Biohazard Bag (24X30) ( (Isi/Iso/Ce Certified) Rate Per Pack Of 1X100 , Cryo Vails 1.8 Ml A Pack Of 1X1000 (Tarson) Rate Per Pack Of 1X1000 , Cryo Marker ( (Isi/Iso/Ce Certified)) , Cryo Tags A Pack Of 1X1000 (Tarson) Rate Per Pack Of 1000 , Film Applicator , Genemag Viral Dns/Rna Purification Kit (400 Plate 96 Preps) Rate Per Box , Mct Rack (Tarson) Rate Per Rack , Microseal B Adhesive Seal (Pcr Seal) Biorad ( Rate Of Single Piece) , Pcr Cap Strips A Pack Of 1X120 (Bio-Rad)( Rate Per Pack Of 1X120 ) , Pcr Plates A Pack Of 1X50 (Bio-Rad , Plastic Case Mounted ) ( Rate Of Pack Of 1X50) , Pcr Seals A Pack Of 1X100 (Bio-Rad ) ( Rate Per Pack Of 1X100 )) , Pcr Tube Strips (Bio-Rad) A Pack Of 1X120( Rate Of Pack 1X120) , Qpcr Adhesive Seal ( Thermo / Brand /Biolinkk /Ils) ( Rate Of Single Piece) , Qpcr Plates 96 Well ( Thermo /Brand/ Biolinkk /Ils) , Racked Sterile Filtered Microtips(Low Retention) 1000Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 100Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 10Ul/20Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 200Ul Tarson Rate Per Box Of 1X960 , Rt-Pcr Kits 96 Well Plate (Bio Rad) Rate Per Box , Thermal Printing Roll For Urine Analyzer And Cbc 57/58Mm Size Rate Per Roll , Thermol Roll 57Mm ,50Mm Rate Per Roll , Plastic Pallet ,Hdpe, Size(1200*1000*60 Mm) ( (Isi/Iso/Ce Certified)) , Pm Kit For Di Plant 7-10 Liter Per Hr (Model: 165935) , Am Kit For Di Plant (Model: 165935) , Pm Kit For Em200 , Elite 580 Calibrator 1X3 Ml , 4 Channel Ise Cleaning Solution - 5421 (6X12ml) (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Reagent Pack @35 Spd Cal A-520 Ml/ Cal B-190 Ml (Total 710 Ml)(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada1 X 20 Ml/1 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada Cali1 X 1 M L (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada Control1 X 1 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Albumin 5 X 22 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Alkaline Phosphatase5 X 22 Ml/5X 6.8 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Amylase 5X11 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Direct 5 X 22 Ml/5X 6.8 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Direct Plus 6 X 44 Ml/6 X 12.3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Total 5 X 22 Ml/5X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Total Plus 6 X 44 Ml/6 X 12.3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Calcium (A) 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Chloride 10 X 12 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Cholesterol 5 X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ck Mb 2 X 12 Ml/2X 3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ck Nac 2 X 12 Ml/2X3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Control H (Aso/Rf/Crp) 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Control L (Aso/Rf/Crp) 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Creatinine-Enzymatic 5 X 30 Ml /5 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Creatinine-Jaffe 5 X 44 Ml/5X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Autowash - System Pack 10 X 100 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Norm 4 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Path 4 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Fe 125 R1-4 X 25 Ml, R2-2 X 12.5 Ml Calibrator: 2 X 2 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin 2 X 14.5/2 X 7.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Calibrator 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Control High 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Control Low 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Gamma Gt 2 X 22 Ml / 2 X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Glucose (God-Pod) 10 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Glucose Hexokinase - Uv 5 X 44 Ml/5X 12.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hba1c Cali Set 5 X 0.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hba1c Con H 1X 0.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hdl Cholesterol With Calibrator 4 X 30 Ml/4 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ldh P 2 X 44 Ml/2X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ldl Cholesterol With Calibrator 2 X 30 Ml/2X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Lipase Xl 1 X 44 Ml/1X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Magnesium 2 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Micro Albumin Control 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Micro Albumin With Cal 1 X 5 Ml/2X 25 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Microprotein With Cal 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Phosphorus 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgot El Mini 2X 22 Ml/2X 6.9 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgot-Hl Small System Pack 5 X 22 Ml/5X 11.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgpt-El Mini 2 X 22 Ml/2X 6.9 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgpt Hl Small System Pack 5 X 22 Ml/5X 11.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein 10 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein (Two Reagents) 4 X 34 Ml/4 X 17 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein Small System Pack 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Triglycerides - 5X 11 Ml/5X4 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Uibc 125R 1-4 X 25 Ml, R 2-2 X 12.5 Ml,Calibrator: 2X 2 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Urea 5 X 44 Ml/5X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Uric Acid 5 X 22 Ml/5X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl Aso Turbilatex Withcalibrator (Ita) 1 X 22 Ml/1X 5.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Autowash Ac/Al Kit5 X 44 Ml/5 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Multical4 X 3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Rf Turbilatex Withcalibrator (Ita) 1 X 22 Ml/1X 5.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Crp-Turbilatex Withcalibrator (Ita) 2 X 22 Ml/2X 6.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl Hba1c With Cali Set2 X 15 Ml/2 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Blood Diluent 20 Litre (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fbh Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fdti Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fdoi Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Cbiquant- 5 Detergent 4X100ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Control Level-1 , 2.5Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Cbc Detergent Fluid (Urit-2900) , Cbc Diluent 20 Ltr (Urit-2900) , Cbc Lytic Fluid (Urit-2900) , Cbc Proclennor (Urit-2900) , Cleaner For Cell Counter Erba H-360, 50Ml. , Elisa Washer (Erba) , Elite H Clean, 50 Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control H (3Ml) ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control L (3Ml) ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control N (3Ml)( Transasia Erba Machine Model - Elite 580 , Proprietry)) , Elite H580 Diluent, 20Litres ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H580 Lyse 1, 500Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H580 Lyse 2, 500Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry)) , Elite H580 Lyse 3, 1Litres ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Embedded O Rings 20Pieces (Erba) , Erba Calcium Chloride For Ecl 105 , Erba D-Dimer Calibrator Kit For Ecl 105 , Erba D-Dimer Kit For Ecl 105 , Erba Norm Kit , Erba Path Kit , Erba Protime Ls For Ecl 105 , Erba Single Reaction Cuvettes For Ecl 105 , Lyse For Cell Counter Erba H-360, 500Ml , Urinorm Controls (High, Low, Normal) For Erba Laura Urine Analyzer , Procleaner For C,B,C (Erba) , Quality Control Norm (For Semi Automatic Auto Analyser Erba) , Quality Control Path (For Semi Automatic Auto Analyser Erba) , Tissue Paper Lint Free Rate Per Roll , Hub Cutter Non Electrical Stainless Steel , Hub Cutter With Sharp Container Of 1 Lt Capacity Cutting Life Of Blade Is 5000 Minimum Ats. Blade Is Made Of Stainless Steel (156911 Of 1992) Thickness Of Blade Should Be 0.5 Mm {Astha} , O2 Flow Meter With Bottle (Isi/Iso/Ce Certified) , Nebulizers : A 120V, 60Hz Mono- Phase Electrical Source With Line Connection Plug Nema 5-15 Type. Protections Against Over-Voltage And Over-Current Line Conditions. {Bpl/Omron/Beurer} , Oxygen Flow Meter With Humidifier Bottle :Chromium Plated Brass Body, Metering Tube And Cover Made Of Polycarbonate Body, Flow Adjustment By Needle Valve Equipped With Inlet Filter-100 Um, Flow Rate 0-15 Liters Per Minute, Flush Flow 60 Litres Per Minute, Flow Read By The Centre Of The Ball, Inlet Pressure 60Psi; Humidifier Bottle: Lid Made Of Abs Plastic, Jar Made Of Unbreakable Poly Carbonate, Valve Pressure Brass Chromium Plated, It Should Be Steam Autoclaved/Gas Sterilized , Regular Stethoscope (Microtone) : Stethoscope Of Standard Size,Chromium Plated Metal Binaural, V Rubber Tube In One Piece. Rotating Piper Fitting For Both Flip Functions. , Stethoscope Daimond , Stethoscope Neonatal (Microtone) , Stethoscope Pediatric (Microtone) , Vtm Vial Rack (Tarson) Rate Per Rack , Waste Bag Sealing Ties , Weighing Machine Adult Manual Krups/ Suvrna , Weighing Machine Adult Digital {Bpl/Omron , B P Appartus Digital ( Omron ) , B P Appartus Digital ( Bpl) , B P Instrument( Conventinal, Led, Mercury Free) ( (Isi/Iso/Ce Certified)) , B P Instrument( Deluxe, Dial Type With Cuff ) ( Diamond) , B P Instrument( Clock Type Dial Size 6X6 Inch , Model -Bpdl237 ) ( Diamond Only) , Clinical Thermometer ,Oval ( (Isi/Iso/Ce Certified)) , Clinical Thermometer ,Digital ( Accusure) , Rectal Thermometer ,Prismatic ( (Isi/Iso/Ce Certified)) , Emergency First Aid Resucitation Kit) ( Adult) ( (Isi/Iso/Ce Certified)) , Emergency First Aid Resucitation Kit) ( Paediatric) ( (Isi/Iso/Ce Certified)) , First Aid Medicine Storage Box/Emergency Medical Box ,Plastic,Emergency Cabinet Oragniser ,Detachable Tray Medical Box& Partition Tray For Segregation, Item Package Quantity 6,White&Red Combination With Plus Sign Medicine Organiser,Handle With Lock (23.6Cm*15.3Cm*14Cm) ( (Isi/Iso/Ce Certified)) , First Aid Medico Box ,Plastic,Multiutility Storage Box With Handle, White, Closure Type Lock (235Cm*16Cm*14Cm) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Floor Model Without Weighing Scale) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Floor Model With Digital Weighing Scale) , Height Measuring Scale(Floor Model With Mechanical Weighing Scale) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Wall Mounted) ( (Isi/Iso/Ce Certified)) , Home Isolation Kit Bag ( (Isi/Iso/Ce Certified)) , Infant Resuscitation Kit (Autoclavable ,Resuable,Infant Resuscitator&250Ml Silicone Bellow With Non Rebreathing Valve&Mask Size 00,01&360 Degree Swiveling Patient Connector With Standard 15 Mm/22Mm Diameter&Corrugated Pvc Oxygen Reservoir& 1.5 Metres Pvc Oxygen Tubing ( (Isi/Iso/Ce Certified)) , Infantometer(Height Measuring Scale Infant) ( (Isi/Iso/Ce Certified)) , Dcp Small Plate: 3.5Mm: All Holes Ss , Dcp Narrow Plate: 4.5Mm: All Holes Ss , Dcp Broad Plate: 4.5Mm: All Holes Ss , Dcp Small Reconstruction Plate: 3.5Mm: All Holes Ss , Dcp Reconstruction Plate: 4.5Mm: All Holes Ss , Dcp Small Reconstruction Plate-Curved: 3.5Mm: All Holes Ss , Lc-Dcp Small Plate:3.5Mm: All Holes Ss , Lc-Dcp Narrow Plate:4.5Mm: All Holes Ss , 5/8 Ring-100,120,140, 160Mm, Ss , 5/8 Ring-180,200,220,240,260Mm, Ss , annual periodical maintenance (Austinmooresprosthesis) Non-Sterile, [37Mmto55mm], Ss , annual periodical maintenance (Austinmooresprosthesis) Sterile, [37Mmto55mm], Ss , Bipolar Prosthesis [Non-Fenestrated]Sterile,[37Mmto55mm], Ss , Bipolar Prosthesis[Fenestrated]Sterile,[37Mmto55mm], Ss , Blade -50,60,70,80,90,100Mm, Degree-90º,100º,110º,120º,130º:, Ss , Boxes Panner, Ss , Bushing-20Mm, Ss , C.C.Screw 4.0Mmxf.Th.-,10Mmto60mm Ss , C.C.Screw 4.0Mmxp.Th.-,10Mmto60mm Ss , C.C.Screw 6.5Mm/7.0Mmx16th.-,40Mmto120mm Ss , C.C.Screw6.5Mm/7.0Mmxf.Th.-,40Mmto120mm Ss , Cancellous Schanz Pin6.5Mmx16th./32Th.-225Mm, Ss , Cancellous Screw 3.5Mm-,10Mmto50mm Ss , Cancellous Screw 4.0Mmxf.Th.-,10Mmto60mm Ss , Cancellous Screw 4.0Mmxp.Th.-,10Mmto60mm Ss , Cannulated Dril Lbit 125Mm-2.7,3.2Mm, Ss , Cannulated Drill Bit 225Mm-4.0,4.5Mm, Ss , Carbon Fiber Ring 100-240 Ss , Circlage Wire With Loop[16,18,20Gauge]-300Mm, Ss , Connecting Clamp, Ss , Connection Bolt-20Mm, Ss , Connection Plate With Threaded End All Holes, Ss , Cortical Screw 2.7Mm-,10Mmto30mm (Selftapping) Ss , Cortical Screw 4.5Mm-,All Sizes (Selftapping) Ss , Cortical Screw3.5Mm-,All Sizes (Selftapping) Ss , Curved Plate- All Sizes, Ss , Danham Pin(Centrallythreaded)4.5/5.0-225Mm, Ss , Dc T Plate: 4.5Mm:,All Sizes Ss , Dcp Angled Blade Plate For Intertrochantric Osteotomies:, Ss , Dcp Angled Blade Plate130ºblade:50,60,70,80,90,100Mm:,All Holes Ss , Dcp Calcaneal Plate: 3.5Mm: All Sizes Ss , Dcp Condylar Buttress Plate: 4.5Mm:(L/R): All Holes Ss , Dcp Condylar Plate9 5ºblade:50/60/70/80Mm: All Sizes Ss , Dcp Narrow Plate: 4.5Mm: All Sizes, Ss , Dcp Lateral Tibia Head Buttress Plate (L/R):4.5Mm: All Sizes Ss , Dcp Semi Tubular Plate: 4.5Mm: All Sizes Ss , Dcp Small Hook Plate:3.5Mm: All Sizes Ss , Dcp Small Plate: 3.5Mm:, All Sizes Ss , Dcp Small Reconstruction Plate: 3.5Mm: All Sizes Ss , Dcp Small Reconstruction Plate-Curved: All Sizes Ss , Dcp Small Tplate Oblique Angled: 3.5Mm:,All Sizes Ss , Dcp Small Tplate R/A: 3.5Mm: All Sizes Ss , Dcp1/3Rd Tubular Plate: 3.5Mm:,All Sizes Ss , Dcpl Buttress Plate: 4.5Mm:(L/R):,All Sizes Ss , Dcpt Plate: 4.5Mm: All Sizes Ss , Dcpy Reconstruction Plate: 3.5Mm:, All Sizes Ss , Dcs Barrel Plate95º:4.5Mm: All Holes Ss , Dhs Barrel Plate 130º/135º:L/B&S/B:4.5Mm: All Sizes Ss , Dhss Crew With Compression Screw, All Sizes Ss , Distractor 6.0Mm [150Mm,200,250Mm], All Sizes Ss , Double Pin Clamp (Deluxe), Ss , Drill Bit Plain All Sizes Ss , Drill Bit Quickcoupling All Sizes Ss , Drummond Wire All Sizes Ss , Dynametric Wire Tensioner, Ss , Elastic Nail All Sizes Ss , Enders Nail All Sizes Ss , Endobutton With Loop-Sterile All Sizes Ss , Endobutton, All Sizes Ss , Enders Nail All Sizes Ss , Helical Blade (Pfna-Ii):, All Sizes Ss , Herbert Screw Cannulated All Sizes Ss , Guide Wire- All Sizes Ss , Half Ring- All Sizes Ss , Hinge-Male,Female&90º, All Sizes Ss , Ilizarow K Wire Bayonet Point, All Sizes Ss , Instruments Set For Acl/Pcl Reconstruction, All Sizes Ss , Instruments Setwith Boxfor Herbert Screw, All Sizes Ss , Interference Screw-Cannulated All Sizes Ss , Interlocking Exper Tibia Nail, All Sizes Ss , Interlocking Humerus Nail: All Sizes Ss , Interlocking Sirus Femur Nail, All Sizes Ss , Interlocking Bolt All Sizes Ss , Interlocking Expert Humerus Nail:,[Cannulated] All Sizes Ss , Interlocking Expert Tibia Nail, All Sizes Ss , Interlocking Femur Nail,[Cannulated] All Sizes Ss , Interlocking Femur Nail, All Sizes Ss , Interlocking Guide Wire, All Sizes Ss , Interlocking Long Proximal Femur Nail135º[Left]/[Right], All Sizes Ss , Interlocking Short Proximal Femur Nail (Pfn) 130º/135º, All Sizes Ss , Interlocking Supra Condylar Nail Angled, All Sizes Ss , Interlocking Tibial Nail, All Sizes Ss , Interlocking Trochantric Proximal Femurnail (Tfn)135º, All Sizes Ss , Italian annual rate contract All Sizes Ss , K. Nail (Straight)- All Sizes Ss , K. Nail(Bent)- All Sizes Ss , K. Wire Double Ended Non Sterile All Sizes Ss , Lc-Dc Broad Plate: All Sizes Ss , Lc-Dcp Narrow Plate: All Sizes Ss , Lc-Dcp Small Plate:3.5Mm:, All Sizes Ss , Locking 1/3Rd Tubular Plate:3.5Mm:, All Sizes Ss , Locking Anterolateral Distal Tibial Plate:(L/R):, All Sizes Ss , Locking Broad Plate: 4.5/5.0Mm:, All Sizes Ss , Locking Calcaneal Plate: D Type:(L/R):, All Sizes Ss , Locking Calcaneal Plate: P Type:(L/R):, All Sizes Ss , Locking Calcaneal Plate:(L/R):, All Sizes Ss , Locking Cancellous Screw 3.5Mmxf.Th.-, All Sizes Ss , Locking Cancellous Screw 5.0Mmxf.Th.-, All Sizes Ss , Locking Clavicle Hook Plate: 3.5Mm:(L/R): All Sizes Ss , Locking Curved Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Ss , Locking Curved Reconstruction Plate: 3.5Mm:, All Sizes Ss , Locking Dhs Barrel Plate All Sizes Ss , Locking Distal Femu Rplate:(L/R):, All Sizes Ss , Locking Distal Fibula Plate: 3.5Mm:, All Sizes Ss , Locking Distal Humerus Plate Dorsolatera With Support: 2.7/3.5Mm:(L/R), All Sizes Ss , Locking Distal Humerus Plate Dorsolateral:2.7/3.5Mm:(L/R):, All Sizes Ss , Locking Distal Humerus Plate Medial:2.7/3.5Mm:(L/R):, All Sizes Ss , Locking Distal Radius (Head4/5Hole)Volarplate:2.7Mm/3.5Mm:(L/R): All Sizes Ss , Locking Distal Radius Volar Plate:3.5Mm:(L/R):, All Sizes Ss , Locking Extra-Articular Distal Humerus Plate:3.5Mm:(L/R):, All Sizes Ss , Locking Lateral Distal Fibula Plate:(L/R):, All Sizes Ss , Locking Lateral Tibial Plate:(L/R):, All Sizes Ss , Locking L-Buttress Plate: 4.5/5.0Mm: All Sizes Ss , Locking Medial Distal Tibial Plate With Tab:(L/R):, All Sizes Ss , Locking Medial Distal Tibial Plate:(L/R):, All Sizes Ss , Locking Medial Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Ss , Locking Medial Proximal Tibial Plate5.0Mm:(L/R): All Sizes Ss , Locking Narrow Plate: 4.5/5.0Mm:, All Sizes Ss , Locking Olecranon Plate: 3.5Mm:(L/R): All Sizes Ss , Locking Pelvic Curved Plate: 3.5Mm: All Sizes Ss , Locking Pelvic Plate: 3.5Mm: All Sizes Ss , Locking Philos Plate: 3.5Mm: All Sizes Ss , Locking Postero Medial Proximal Tibial Plate: All Sizes Ss , Locking Posterolateral Distal Fibula Plate:(L/R): All Sizes Ss , Locking Proximal Femur Plate:4.5/5.0Mm:(L/R): All Sizes Ss , Locking Proximal Humerus Plate:3.5Mm:, All Sizes Ss , Locking Proximal Tibia Plate 3.5Mm(Ztype):(L/R): All Sizes Ss , Locking Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Ss , Locking Proximal Tibia Plate 5.0Mm:(L/R): All Sizes Ss , Locking S-Clavicle Plate With Lateral Extension: 2.7/3.5Mm:(L/R):, All Sizes Ss , Locking S-Clavicle Plate: 3.5Mm:(L/R):, All Sizes Ss , Locking Screw 2.7Mm(S.T.)-, All Sizes Ss , Locking Screw 3.5Mm(S.T.)-, All Sizes Ss , Locking Screw 5.0Mm(S.T.)-, All Sizes Ss , Locking Small Plate: 3.5Mm:, All Sizes Ss , Locking Small Tplate Obliqueangeled:3.5Mm:(L/R): All Sizes Ss , Locking Small Tplate Rightangeled:3.5Mm:, All Sizes Ss , Locking Straight Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Ss , Locking Straight Reconstruction Plate:3.5Mm:, All Sizes Ss , Locking T-Buttress Plate: 4.5/5.0Mm: All Sizes Ss , Locking Tomo Fix Medial High Medial Plate (Osteotomy):3.5Mm:, All Sizes Ss , Malleolar Screw3.5Mm-, All Sizes Ss , Malleolar Screw4.5Mm-, All Sizes Ss , Mechanical Wire Tensioner, All Sizes Ss , Modular Bipolar Cup [Collar+3,0,-3], [Ball - All Sizes Ss , Modular Bipolar Stem [Small,Medium,Large], All Sizes Ss , Multipin Clamp, All Sizes Ss , Nut, All Sizes Ss , Nylonnut, All Sizes Ss , Olive Wire 400Mm, All Sizes Ss , Open Single Pin Clamp, All Sizes Ss , Paediatric Dhs Barrel Plate: 3.5Mm:, All Sizes Ss , Paediatric Dhss Crew With Compression Screw, All Sizes Ss , Pfn Bolt6.5Mm-, All Sizes Ss , Pfnbolt8.0Mm-, All Sizes Ss , Post Male/Female- All Sizes Ss , Proxima Femur Nail Antirotation (Pfna -Ii):Short:, All Sizes Ss , Proximal Femur Nail Antirotation (Pfna-Ii):Long:(L/R):, All Sizes Ss , Rush Nai All Sizes Ss , S.S. Wire-16,18,20,22,24Gauge, All Sizes Ss , Scahnz Pin All Sizes Ss , Schanz Pin Bolt, All Sizes Ss , Schanz Pin Introducer, All Sizes Ss , Single Pin Clamp (Deluxe), All Sizes Ss , Single Pin Clamp (Ordinary), All Sizes Ss , Sirus Nail Bolt All Sizes Ss , Small Spanner, All Sizes Ss , Spacing Washer, All Sizes Ss , Spiked Ligament Staple [Small&Large], All Sizes Ss , Spiked Ligament Washer, All Sizes Ss , Square Nail [Radius/Ulna] All Sizes Ss , Steinman Pin All Sizes Ss , Straight Plate All Sizes Ss , Suture Dis Cwasher, All Sizes Ss , Suture Discwith -Regular, All Sizes Ss , Suture Discwith -Conical, All Sizes Ss , Telescopic Rod All Sizes Ss , Thompsons Prosthesis Non-Sterile, All Sizes Ss , Thompsons Prosthesis Sterile, All Sizes Ss , Threaded Guide Wire- All Sizes Ss , Threaded K. Wire Double Ended - All Sizes Ss , Threaded Rod- All Sizes Ss , Threaded Rod-Slotted- All Sizes Ss , Threaded Socket- All Sizes Ss , Tibial Post Fixation Screw All Sizes Ss , Transverse Clamp, All Sizes Ss , Triple Trocarset, All Sizes Ss , Tubeto Tube Clamp, All Sizes Ss , Tubular Rod(Perinchrate), All Sizes Ss , Twin Adjustable Clamp-Curved, All Sizes Ss , Twin Adjustable Clamp-Straight, All Sizes Ss , Twisted Plate- All Sizes Ss , Washer (Slotted), All Sizes Ss , Wire Fixation Bolt-Slotted & Cannulated, All Sizes Ss , Wrenchoqube All Sizes Ss , K Wire Sterile Double All Sizes Ss , Dcp Small Plate: 3.5Mm: All Holes Titanium , Dcp Narrow Plate: 4.5Mm: All Holes Titanium , Dcp Broad Plate: 4.5Mm: All Holes Titanium , Dcp Small Reconstruction Plate: 3.5Mm: All Holes Titanium , Dcp Reconstruction Plate: 4.5Mm: All Holes Titanium , Dcp Small Reconstruction Plate-Curved: 3.5Mm: All Holes Titanium , Lc-Dcp Small Plate:3.5Mm: All Holes Titanium , Lc-Dcp Narrow Plate:4.5Mm: All Holes Titanium , 5/8 Ring-100,120,140, 160Mm, Titanium , 5/8 Ring-180,200,220,240,260Mm, Titanium , annual periodical maintenance (Austinmooresprosthesis) Non-Sterile, [37Mmto55mm], Titanium , annual periodical maintenance (Austinmooresprosthesis) Sterile, [37Mmto55mm], Titanium , Bipolar Prosthesis [Non-Fenestrated]Sterile,[37Mmto55mm], Titanium , Bipolar Prosthesis[Fenestrated]Sterile,[37Mmto55mm], Titanium , Blade -50,60,70,80,90,100Mm, Degree-90º,100º,110º,120º,130º:, Titanium , Boxes Panner, Titanium , Bushing-20Mm, Titanium , C.C.Screw 4.0Mmxf.Th.-,10Mmto60mm Titanium , C.C.Screw 4.0Mmxp.Th.-,10Mmto60mm Titanium , C.C.Screw 6.5Mm/7.0Mmx16th.-,40Mmto120mm Titanium , C.C.Screw6.5Mm/7.0Mmxf.Th.-,40Mmto120mm Titanium , Cancellous Schanz Pin6.5Mmx16th./32Th.-225Mm, Titanium , Cancellous Screw 3.5Mm-,10Mmto50mm Titanium , Cancellous Screw 4.0Mmxf.Th.-,10Mmto60mm Titanium , Cancellous Screw 4.0Mmxp.Th.-,10Mmto60mm Titanium , Cannulated Dril Lbit 125Mm-2.7,3.2Mm, Titanium , Cannulated Drill Bit 225Mm-4.0,4.5Mm, Titanium , Carbon Fiber Ring 100-240 Titanium , Circlage Wire With Loop[16,18,20Gauge]-300Mm, Titanium , Connecting Clamp, Titanium , Connection Bolt-20Mm, Titanium , Connection Plate With Threaded End All Holes, Titanium , Cortical Screw 2.7Mm-,10Mmto30mm (Selftapping) Titanium , Cortical Screw 4.5Mm-,All Sizes (Selftapping) Titanium , Cortical Screw3.5Mm-,All Sizes (Selftapping) Titanium , Curved Plate- All Sizes, Titanium , Danham Pin(Centrallythreaded)4.5/5.0-225Mm, Titanium , Dc T Plate: 4.5Mm:,All Sizes Titanium , Dcp Angled Blade Plate For Intertrochantric Osteotomies:, Titanium , Dcp Angled Blade Plate130ºblade:50,60,70,80,90,100Mm:,All Holes Titanium , Dcp Calcaneal Plate: 3.5Mm: All Sizes Titanium , Dcp Condylar Buttress Plate: 4.5Mm:(L/R): All Holes Titanium , Dcp Condylar Plate9 5ºblade:50/60/70/80Mm: All Sizes Titanium , Dcp Narrow Plate: 4.5Mm: All Sizes, Titanium , Dcp Lateral Tibia Head Buttress Plate (L/R):4.5Mm: All Sizes Titanium , Dcp Semi Tubular Plate: 4.5Mm: All Sizes Titanium , Dcp Small Hook Plate:3.5Mm: All Sizes Titanium , Dcp Small Plate: 3.5Mm:, All Sizes Titanium , Dcp Small Reconstruction Plate: 3.5Mm: All Sizes Titanium , Dcp Small Reconstruction Plate-Curved: All Sizes Titanium , Dcp Small Tplate Oblique Angled: 3.5Mm:,All Sizes Titanium , Dcp Small Tplate R/A: 3.5Mm: All Sizes Titanium , Dcp1/3Rd Tubular Plate: 3.5Mm:,All Sizes Titanium , Dcpl Buttress Plate: 4.5Mm:(L/R):,All Sizes Titanium , Dcpt Plate: 4.5Mm: All Sizes Titanium , Dcpy Reconstruction Plate: 3.5Mm:, All Sizes Titanium , Dcs Barrel Plate95º:4.5Mm: All Holes Titanium , Dhs Barrel Plate 130º/135º:L/B&S/B:4.5Mm: All Sizes Titanium , Dhss Crew With Compression Screw, All Sizes Titanium , Distractor 6.0Mm [150Mm,200,250Mm], All Sizes Titanium , Double Pin Clamp (Deluxe), Titanium , Drill Bit Plain All Sizes Titanium , Drill Bit Quickcoupling All Sizes Titanium , Drummond Wire All Sizes Titanium , Dynametric Wire Tensioner, Titanium , Elastic Nail All Sizes Titanium , Enders Nail All Sizes Titanium , Endobutton With Loop-Sterile All Sizes Titanium , Endobutton, All Sizes Titanium , Enders Nail All Sizes Titanium , Helical Blade (Pfna-Ii):, All Sizes Titanium , Herbert Screw Cannulated All Sizes Titanium , Guide Wire- All Sizes Titanium , Half Ring- All Sizes Titanium , Hinge-Male,Female&90º, All Sizes Titanium , Ilizarow K Wire Bayonet Point, All Sizes Titanium , Instruments Set For Acl/Pcl Reconstruction, All Sizes Titanium , Instruments Setwith Boxfor Herbert Screw, All Sizes Titanium , Interference Screw-Cannulated All Sizes Titanium , Interlocking Exper Tibia Nail, All Sizes Titanium , Interlocking Humerus Nail: All Sizes Titanium , Interlocking Sirus Femur Nail, All Sizes Titanium , Interlocking Bolt All Sizes Titanium , Interlocking Expert Humerus Nail:,[Cannulated] All Sizes Titanium , Interlocking Expert Tibia Nail, All Sizes Titanium , Interlocking Femur Nail,[Cannulated] All Sizes Titanium , Interlocking Femur Nail, All Sizes Titanium , Interlocking Guide Wire, All Sizes Titanium , Interlocking Long Proximal Femur Nail135º[Left]/[Right], All Sizes Titanium , Interlocking Short Proximal Femur Nail (Pfn) 130º/135º, All Sizes Titanium , Interlocking Supra Condylar Nail Angled, All Sizes Titanium , Interlocking Tibial Nail, All Sizes Titanium , Interlocking Trochantric Proximal Femurnail (Tfn)135º, All Sizes Titanium , Italian annual rate contract All Sizes Titanium , K. Nail (Straight)- All Sizes Titanium , K. Nail(Bent)- All Sizes Titanium , K. Wire Double Ended Non Sterile All Sizes Titanium , Lc-Dc Broad Plate: All Sizes Titanium , Lc-Dcp Narrow Plate: All Sizes Titanium , Lc-Dcp Small Plate:3.5Mm:, All Sizes Titanium , Locking 1/3Rd Tubular Plate:3.5Mm:, All Sizes Titanium , Locking Anterolateral Distal Tibial Plate:(L/R):, All Sizes Titanium , Locking Broad Plate: 4.5/5.0Mm:, All Sizes Titanium , Locking Calcaneal Plate: D Type:(L/R):, All Sizes Titanium , Locking Calcaneal Plate: P Type:(L/R):, All Sizes Titanium , Locking Calcaneal Plate:(L/R):, All Sizes Titanium , Locking Cancellous Screw 3.5Mmxf.Th.-, All Sizes Titanium , Locking Cancellous Screw 5.0Mmxf.Th.-, All Sizes Titanium , Locking Clavicle Hook Plate: 3.5Mm:(L/R): All Sizes Titanium , Locking Curved Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Titanium , Locking Curved Reconstruction Plate: 3.5Mm:, All Sizes Titanium , Locking Dhs Barrel Plate All Sizes Titanium , Locking Distal Femu Rplate:(L/R):, All Sizes Titanium , Locking Distal Fibula Plate: 3.5Mm:, All Sizes Titanium , Locking Distal Humerus Plate Dorsolatera With Support: 2.7/3.5Mm:(L/R), All Sizes Titanium , Locking Distal Humerus Plate Dorsolateral:2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking Distal Humerus Plate Medial:2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking Distal Radius (Head4/5Hole)Volarplate:2.7Mm/3.5Mm:(L/R): All Sizes Titanium , Locking Distal Radius Volar Plate:3.5Mm:(L/R):, All Sizes Titanium , Locking Extra-Articular Distal Humerus Plate:3.5Mm:(L/R):, All Sizes Titanium , Locking Lateral Distal Fibula Plate:(L/R):, All Sizes Titanium , Locking Lateral Tibial Plate:(L/R):, All Sizes Titanium , Locking L-Buttress Plate: 4.5/5.0Mm: All Sizes Titanium , Locking Medial Distal Tibial Plate With Tab:(L/R):, All Sizes Titanium , Locking Medial Distal Tibial Plate:(L/R):, All Sizes Titanium , Locking Medial Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Titanium , Locking Medial Proximal Tibial Plate5.0Mm:(L/R): All Sizes Titanium , Locking Narrow Plate: 4.5/5.0Mm:, All Sizes Titanium , Locking Olecranon Plate: 3.5Mm:(L/R): All Sizes Titanium , Locking Pelvic Curved Plate: 3.5Mm: All Sizes Titanium , Locking Pelvic Plate: 3.5Mm: All Sizes Titanium , Locking Philos Plate: 3.5Mm: All Sizes Titanium , Locking Postero Medial Proximal Tibial Plate: All Sizes Titanium , Locking Posterolateral Distal Fibula Plate:(L/R): All Sizes Titanium , Locking Proximal Femur Plate:4.5/5.0Mm:(L/R): All Sizes Titanium , Locking Proximal Humerus Plate:3.5Mm:, All Sizes Titanium , Locking Proximal Tibia Plate 3.5Mm(Ztype):(L/R): All Sizes Titanium , Locking Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Titanium , Locking Proximal Tibia Plate 5.0Mm:(L/R): All Sizes Titanium , Locking S-Clavicle Plate With Lateral Extension: 2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking S-Clavicle Plate: 3.5Mm:(L/R):, All Sizes Titanium , Locking Screw 2.7Mm(S.T.)-, All Sizes Titanium , Locking Screw 3.5Mm(S.T.)-, All Sizes Titanium , Locking Screw 5.0Mm(S.T.)-, All Sizes Titanium , Locking Small Plate: 3.5Mm:, All Sizes Titanium , Locking Small Tplate Obliqueangeled:3.5Mm:(L/R): All Sizes Titanium , Locking Small Tplate Rightangeled:3.5Mm:, All Sizes Titanium , Locking Straight Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Titanium , Locking Straight Reconstruction Plate:3.5Mm:, All Sizes Titanium , Locking T-Buttress Plate: 4.5/5.0Mm: All Sizes Titanium , Locking Tomo Fix Medial High Medial Plate (Osteotomy):3.5Mm:, All Sizes Titanium , Malleolar Screw3.5Mm-, All Sizes Titanium , Malleolar Screw4.5Mm-, All Sizes Titanium , Mechanical Wire Tensioner, All Sizes Titanium , Modular Bipolar Cup [Collar+3,0,-3], [Ball - All Sizes Titanium , Modular Bipolar Stem [Small,Medium,Large], All Sizes Titanium , Multipin Clamp, All Sizes Titanium , Nut, All Sizes Titanium , Nylonnut, All Sizes Titanium , Olive Wire 400Mm, All Sizes Titanium , Open Single Pin Clamp, All Sizes Titanium , Paediatric Dhs Barrel Plate: 3.5Mm:, All Sizes Titanium , Paediatric Dhss Crew With Compression Screw, All Sizes Titanium , Pfn Bolt6.5Mm-, All Sizes Titanium , Pfnbolt8.0Mm-, All Sizes Titanium , Post Male/Female- All Sizes Titanium , Proxima Femur Nail Antirotation (Pfna -Ii):Short:, All Sizes Titanium , Proximal Femur Nail Antirotation (Pfna-Ii):Long:(L/R):, All Sizes Titanium , Rush Nai All Sizes Titanium , S.S. Wire-16,18,20,22,24Gauge, All Sizes Titanium , Scahnz Pin All Sizes Titanium , Schanz Pin Bolt, All Sizes Titanium , Schanz Pin Introducer, All Sizes Titanium , Single Pin Clamp (Deluxe), All Sizes Titanium , Single Pin Clamp (Ordinary), All Sizes Titanium , Sirus Nail Bolt All Sizes Titanium , Small Spanner, All Sizes Titanium , Spacing Washer, All Sizes Titanium , Spiked Ligament Staple [Small&Large], All Sizes Titanium , Spiked Ligament Washer, All Sizes Titanium , Square Nail [Radius/Ulna] All Sizes Titanium , Steinman Pin All Sizes Titanium , Straight Plate All Sizes Titanium , Suture Dis Cwasher, All Sizes Titanium , Suture Discwith -Regular, All Sizes Titanium , Suture Discwith -Conical, All Sizes Titanium , Telescopic Rod All Sizes Titanium , Thompsons Prosthesis Non-Sterile, All Sizes Titanium , Thompsons Prosthesis Sterile, All Sizes Titanium , Threaded Guide Wire- All Sizes Titanium , Threaded K. Wire Double Ended - All Sizes Titanium , Threaded Rod- All Sizes Titanium , Threaded Rod-Slotted- All Sizes Titanium , Threaded Socket- All Sizes Titanium , Tibial Post Fixation Screw All Sizes Titanium , Transverse Clamp, All Sizes Titanium , Triple Trocarset, All Sizes Titanium , Tubeto Tube Clamp, All Sizes Titanium , Tubular Rod(Perinchrate), All Sizes Titanium , Twin Adjustable Clamp-Curved, All Sizes Titanium , Twin Adjustable Clamp-Straight, All Sizes Titanium , Twisted Plate- All Sizes Titanium , Washer (Slotted), All Sizes Titanium , Wire Fixation Bolt-Slotted & Cannulated, All Sizes Titanium , Wrenchoqube All Sizes Titanium , K Wire Sterile Double All Sizes Titanium , 10X14 Medium Tray , Autoclave Drum , Bipolar Cautery , Boiler , Draping Sheet , Duragibre , Ethlon 1-0Rc , Green Draping Sheet , Half Anoscope , Indloop , Isocyanne Acryl Glue , Isoflurane Injection , Laparoscopic Babcock , Laparoscopic Grasper , Laparoscopic Sheath , Lt Clump 300 , Lt Clump 400 , Macroporous Hermial Mush , Monocryl 4-0 Rc , Neostigmine + Glycopyalate (Reversal) Injection , Open Chele Clip Applicator Huom , Ot Gown , Plastic Laparoscopic Port 10 Mm , Plastic Laparoscopic Port 5 Mm , Proctoscope , Prolene 1-0 Rb , Prolene 2-0 Rb , Prolene 3-0 Rb , Pulse Oximeter , Reservoir Bag Below Jar , Skin Marker , Tissue Adhesive Glue , Tracheastong Tray (T.T) , Tridos Vicryl 2-Rb , Vacuronium Injection , 45 Degree Kelmen 0.9Mm Phaco Sleeve (Alcon) , 45 Degree Kelmen 0.9Mm Phaco Tip (Alcon) , Angled Vannas Scissors , Anterior Chamber Iol (Power Range + 1.0 Ds To + 25.0 Ds ) , Artery Forceps (Medium) , B Class Autoclave , Barraquer Needle Holder , Barraquer Wire Speculum , Bimanual I & A Handpiece ( For Phaco 1 Set) , Blades For Eye Surgey Crecent 2.6 , Blades For Eye Surgey Implant 5.2Mm (Keratone) , Blades For Eye Surgey Keratones 2.8Mm Keratone , Blades For Eye Surgey Keratones 3.2Mm Keratone , Bome Plier , Bowmanns Probes , Capsulaorhexis Lit Rate Foeceps With Kirby Round Handle 103Mm Length , Capsulorhexis Forceps 23G With Micro Grasping Tip , Cassette For Laureate Phaco ( Alcon) , Castrovejo Vernier Calliper ( Stainless Steel) , Castroviejo Corneal Scissor , Chalazion Clamp , Chalazion Curette , Conjunctival Scissor , Corneal Universal Curved Scissor , Dastoor Superior Rectus Forceps , Direct Opthalmoscope Bulb With Charger Handle (Heine) , Epilation Forceps , Eye Aspiration Canula 20 No & 22 No. , Eye Bowling , Eye Cannula , Eye Speculum With Adustable Spread (Screw Type) , Eye Vectus , Formalin Chamber , Halogen Bubl 15V.24V (150W) 24V (250W) With Reflection , Hydrophillic Acrylie Foldabale Iols In Preloaded Delivery System Optical Diameter 6Mm , Overall Length 12.5Mm To 13 Mm Optic Design Biconvex 360Degrees Squre Edge And Aspheric Optics Dioptric Range + 1.0 Ds To 30 Ds , Hydroxypropyl Methyleellulose Inj. 2%, 2Ml Pfs (Glass Syring) , Hydroxypropyl Methyleellulose Inj. 2%, 5Ml Pfs (Glass Syring) , Hydrrodissection Cannula , I&A Cannula 18G, 20G, 22G , Instrument Tray , Instrument Tray ( Set Of 15 Instrument) , Iol Dialer , Iris Repositor , Irrigation & Aspiration Cannula 21G (Simco) , Irrigation & Aspiration Cannula 22G (Simco) , Irrigation & Aspiration Cannula 23G (Simco) , Irrigation Wire Vectis 22G , Kidney Tray Large , Kidney Tray Small , Kratz Barraquer Wire Speculum Adult (Size) , Large Bowls , Laureate (Alcon) Phaco Canulla , Laureate (Alcone) Phaco Tips Cleves , Lens Holding Forceps T Type (110Mm) , Lensometer , Lims 1*2 Teeth Extrafine Forceps , Lims Forceps , Mc Pherson Forceps , Mcpherson Angled 12Mm Castroviejo Forceps (109Mm Size) , Medelec Corneal Forceps Staight Micro 1*2 Length , Medium Needle Holder , Mephesson Forceps Angled , Micro Capsulorhexis Forceps , Micro Vanna Scissor , Mosquito Artery , Mosquito Artery Curved , Mosquito Forceps , Mvr Blad 20No. Angled Blade , Needle Holder Barraquer Curved W/O Locl &Lock , Opthalamoscope Bulb , Phaco Chopper , Phaco Spatula Cum Rotator Doublr Ended , Pierse Corneal Forceps (Hoskin) , Pinky Ball (Eye) , Plain Scissor (Small) , Presbiopics Spectacles + 0.50 Ds To + 3.0 Ds , Proparacian Eye Drop , Punctum Dilator , Retinoscope With Charger Handle &Charger , Self Retaining Eye Speculum (Liberman) , Simco Irrigation And Aspiration , Simcoes 18A Cannula 23G,22G , Sinsky Hook , Slik/Nylon 10-0 , Small Bowls , Sponge Holding Forceps , Superior Rectus Forceps 1*2 Teeth , Suture Tying Forceps Curved , Suture Tying Forceps Straight , Tenotomy Scissor , Tonometer , Torch , Trabeudectomy Punch , Travoprost 40 Ug/Ml 2.5Ml Vial Eye Drops 40 Ug/Ml 2.5Ml , Trial Lense Set , Utrata Capsulorhexis Forceps , VannaS Scissor ( Angled) , Vernier Calliper Stainless Steel , Vertical Phaco Chopper , Vicryl Suture 6-0 , Vicryl Suture 8-0 , Vision Box For Eye , Wescott Tenotomy Scissor , Wire Speculum , Wire Vectis (Irrigating) , Wrench For Alcon Phaco Tip (Metal) , Antrum Curette , Antrum Grasping Forceps , Antrum Nasal Scissor Straight , Tonsil Snare , Waugh Dissecting Forceps Plain , Adenoid Curette With Cage Small & Large , Adenoid Curette Without Cage Small & Large , Adson Forceps Plain , Adson Forceps Tooth , All Ent Opd Instrument , Antrume Ball Double Ended , Antrume Punch Backward Cutting Up , Antrume Punch Through Cutting , Antrume Sickle Knife , Antrume Suction Cannula , Ash Septum Forceps , Aur Frichet Nasal Retractor , Backhouse Towel Forceps , Ballenger Swivel Knife , Beals Respatary , Birkett Tonsil Artery Forceps Straight & Curved , Blakeley Nasal Forceps 90 Degree Upward , Blakesley Nasal Forceps 45 Degree Upward , Blakesley Nasal Forceps Straight , Bone Cutting Forceps. , Boyle Davis Mouth Gag Set Of 5 Blades Adult & Child. , Chiset , Circular Knife , Cottle Alar Retractor , Curved Suction 1,2,3,4 1Set , Denis Brown Tonsil Holding Forceps , Draffine Bipod Stand With Plates. , Drill Burr - Cutting- 5,4,3,2 Diamond- 5,4,3,2 , Drill Machionl (Marathan) , Ear Speculum Set Of 4 Black Finish , Endoscope 0 , 45, 70 Degree With Complete Unit. , Ent Examination Unit , Ent Otoscope , Farabeuf Elevator , Freer Elevator Double Ended , Frogior Suction Cannula , Gauge , Hand Piece Nsk Straight , Hartman Aurat Forceps , Hause Diper Nipper , Headlight 10W , Heyman Turbinectomy Scissors , House Curret Double Ended , Iris Scissors 6 , Irrigation And Aspiration Cannula , Joseph Nasal Rasp Fine & Coarse , Joseph Nasal Scissor , Karrisian Punch , Killian Nasal Speculum Small, Medium, Large , Kilner Retractor , Lucs Nasal Forceps Small, Large , Mallet , Massing Elevator Double Ended , Mastoid Retractor 2X2 Pronges , Mastoid Retractor 3X3 Pronges , Mastoid Suction Tube Set Of 4 , Mastoid Suction Tube Set Of 4 , Micro Crocodile Cup Forceps Set , Micro Crocodile Forceps Serrated Set -2 , Micro Ear Suction Tips Set Adapter , Microscopezeiss F Recording , Needle 45 Hook , Needle 90 Hook , Needle Curved , Needle Straight , Negus Pusher Forceps , Negus Tonsil Artery Forceps Long Curved & V- Shaped , Oesteotome , Peritonsillar Sillar Forceps , Plaster Knife , Pta (Pure Tone Audiometers) With Oae , Sickle Knife , Sterilizing Box + Double Silicon Matt , Sterilizing Box With Double Silicon Matt , Suction Elevator With Stillet , Suction Elevator With Stillet. , Suction Machine Portable And For Ot ( 1 Horse Power) , Super Punch Through Letting Up Turned , Superior Punch Through Cutting St. , Thudicum Nasal Speculum Set Of 3 , Tilley Nasal Packing Forcep , Tonsil Dissector , Tonsil Needle Holder , Tonsil Piller Retractor And Dissector , Tonsil Scissor Straight & Curved , Tonsillar Knife , Walsham Septum Forceps , Walter Scissors , Waugh Dissecting Forceps 1X2 Teeth , Yunkour Suction Tube , Black Hit , Candle Round( Big Size) , Detergent Liquid 1 Litre ( (Isi/Iso/Ce Certified)) , Detergent Powder 1Kg ( (Isi/Iso/Ce Certified)) , Disposable Trimmer Plus Skin Prep Razor ( (Isi/Iso/Ce Certified)) , Floor Duster 1X1mt Superior Quality , Hand Duster 22 X 22Cm Superior Quality , Harpic Bathroom Cleaner 500 Ml (Red) ( (Isi/Iso/Ce Certified)) , Harpic Toilet Cleaner 500 Ml (Blue) ( (Isi/Iso/Ce Certified)) , Heat Cure Acrylic Powder (Isi/Iso/Ce Certified) Pink , Hydrogen Peroxide 3%, 100 Ml ( (Isi/Iso/Ce Certified)) , Hydrogen Peroxide Solution 6%, 400 Ml , Lead & Colour Pencil For Tissue Labeling ( (Isi/Iso/Ce Certified)) , Liquid Hand Wash Soap 5 Litre ( (Isi/Iso/Ce Certified)) , Liquid Hand Wash Soap 5 Litre (Safe For Skin)Isi/Iso/Gmp Certified , Loader (Iron Trolley Stainless Steel With Wide& Large Wheels) Weight Bearing Capacity 300 Kg. (For Goods Transporation Inside Hospital) , Mattress Hospital With Rexin Cover 72*36*4 Inch 40 Density 3 Year Warranty ( (Isi/Iso/Ce Certified)) , Micro Crocodile Forcep Curved ( (Isi/Iso/Ce Certified)) , Mopping Trolley With 2 Bucket On Four Wheels ( (Isi/Iso/Ce Certified)) , Mosquito Repellent Liquid Complete Set (Machine With Reffil) Unit Rate ( (Isi/Iso/Ce Certified)) , Mosquito Repellent Liquid ( Reffil Only) Unit Rate , Naphthalene Balls (Repellent Against Insects & Moths) Pack Of 200 Gm. ( (Isi/Iso/Ce Certified)) , Naphthalene Balls (Repellent Against Insects & Moths) Pack Of 200 Gm. ( (Isi/Iso/Ce Certified)) , Needle Destroyer 1.5 Litre Stainless Steel ( (Isi/Iso/Ce Certified)) , Phool Jharu (Baans) Standard Quality Per Kg. , Phool Jharu Standard Quality Per Kg. , Thermocol Box Size 18.5X12.5X13 Cm. , Toilet Cleaner Brush Superior Quality , Tongue Depressor Ss ( (Isi/Iso/Ce Certified)) , Tongue Depressor Ss ,L-Shape ( (Isi/Iso/Ce Certified)) , Wiper For Cleaning Floor(Long Stainless Steel Handle) Good Quality , Wiper For Cleaning Floor(Long Stainless Steel Handle) Good Quality (Scotch Brite) , Squeeze Bottle 100Ml , Falcon Tube 50Ml , Falcon Tube Stand , Ortho-Tolidine Solution/Reagent 500Ml , Ortho-Tolidine Test Kit (5 Ppm Level) , Dengue Elisa Igm Kit , Elisa Reader Paper Roll , Bmw Poly Bags (Red, Black, Yellow, Blue) Per Kag , Bio Waste Dustbin 15-20 Litter
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 12
3.
Housing Urban and Rular Development #11393708 Price Bid
Tender for Supplying Of Household Items In Banga Bhawan, 3, Hailey Road & Bangla Bhawan, 2, Pt. Uma Shankar Dikshit Marg, Chanakyapuri, New Delhi During The Year 2026-27. , Supplying Of Surface Mounted Overhead Hydraulic Door Closer Containing Aluminium Extruded Section Tubular Type Body With Arm Having Shutter Leaf Width Upto 1150Mm & Maximum Weighing Capacity 110 Kgs, Is:3564 Certified Marked, Cml No. 7600106708 Of Channa Make Approved Quality Or Reputed Brand Including Double Speed Adjustment With Necessary Accessories And Screws Etc. As Per Direction Of Engineer-In-Charge. , Supplying Of Mortise Door Lock Handle Set Having 175 Mm Elc 06, 6-Lever Locking Mechanism, Suitable For Left & Right Handed Doors (Satin Steel Finish) Of Godrej Make Or Equivalent As Approved By The Engineer-In-Charge. , Supplying Of Tower Bolt Of 300 Mm Long Of Godrej Make Or Equivalent As Approved Made With High-Quality Aluminium, Stainless Steel (Ss) Solid Rod, Antique Brass Finish On Aluminium Body, Tower Bolt With Elegant Appearance, Strong And Sturdy Construction Suitable For Frequent Usage. , Providing Of 125 Mm (5) Long Door Stopper Of Lapo Or Equivalent Approved Make, With Antique Finish, Heavy-Duty Rubber Buffer For Strong Grip On All Surfaces, Suitable For Door Protection, Complete With All Necessary Screws And Fittings, As Per Approved Sample And Direction Of Engineer-In-Charge. , Providing Multi Lock Of Godreg Make Or Equivalent, Best Quality, Rectangular Body Type With Front Key Cylinder And Internal Locking Mechanism, Complete With Duplicate Keys, Suitable For Wooden Cabinets, Shutters Or Drawers, Including All Necessary Screws And Fittings, As Approved By The Engineer-In-Charge. , Providing Of 125 Mm (5) Long Heavy-Duty Butt Hinge Made Of High-Quality Steel With Antique Brass Finish, Having Smooth Knuckle With Pin, Suitable For Wooden Doors/ Shutters, Including All Necessary Screws And Fittings, Complete As Per Approved Sample And Direction Of Engineer-In-Charge. , Supplying Self-Tapping/ Counter Sunk Head Screws Of Assorted Sizes, Made Of High-Quality Hardened Steel With Black Phosphate/Anti-Rust Finish, Having Phillips Head For Better Grip, Suitable For Fixing Hardware, Hinges And Fittings In Wood/ Board Surfaces, Complete As Per Approved Sample And Direction Of Engineer-In-Charge. 1 Packet Containing Of 1000 Screws , Supplying Of Superior Quality Pedestal Fan Of Sweep Size 400 Mm, Having 3 Aerodynamically Designed Balanced Blades, High Speed Motor, 60° Oscillation Type, 1390 Mm Ground Clearance, Air Delivery Capacity Not Less Than 95 M3/ Min Of Approved Colour, Havells/ Usha/ Orient Or Any Approved Make. , Supply Of Dustbin Made Of Poly Vinyl Chloride Plastic Having Top Size 440 Mm X 440 Mm, Height 840 Mm, Bottom Size 350 Mm X 285 Mm, Wheel Based And Moveable, Capacity 120 Litres Of Approved Colour & Make - Syntax Or Similar. , Supply Of Rubberised Floor Mat With Anti Skid Profile On The Both Sides Minimum Thickness 5 Mm, Design And Color As Directed By Engineer-In- Charge. , Supplying Of Aluminium Cloth Hanger Made Of 3 Mm Dia Aluminium Ware Frame Having Shoulder Length Not Less Than 380 Mm Of Approved Design And Make As Approved By The Engineer-In-Charge. , Supplying Non-Slip Cloth Hangers Made Of Durable Abs Plastic Body With Soft Velvet/Anti-Skid Coating And Strong Metallic Hook (Chrome/Rose Gold Finish), Suitable For Hanging Garments Without Slipping, Complete As Per Approved Sample And Direction Of Engineer-In-Charge. , Supplying Moulded Plastic Arm Chair Of Nilkamal Or Equivalent Approved Make, Made From High-Quality Virgin Polymer, Strong And Durable, With Armrests And Ergonomic Back Design, Preferably White In Colour, Suitable For Indoor/Outdoor Use, Complete As Per Approved Sample And Direction Of Engineer-In-Charge. , Supplying Plastic Armchair (Molded Polypropylene With Rattan/Wicker Textured Backrest And Seat, Armrests, Weather-Resistant, Approx. Dimensions: Overall Height 860 Mm, Width ~405-535 Mm, Depth ~500-600 Mm, Supreme Furniture Or Equivalent Brand, Approved Colour, Load Capacity ~110-150 Kg) - Including Manufacturing Defects Warranty. , Supply Of Medium Height Stool Of Ski Mercury Plastic Or Equivalent Made Of High Quality Material, Suitable For Use In Bathroom Of Approved Colour And Design. , Microfibre Bath Mat, Soft & Absorbent 2650 Gsm, Non-Slip Latex Backing, Quick-Dry, Washable; Opella Design, Canyon Brown, Size 40X60 Of Approved Brand And Colour. , Supply Of Premium Quality Storage Clear Glass Jar With Ss Lid Capacity Not Less Than 1.5L Of Korken Brand Or Similar , Supply Of Premium Storage Clear Glass Jar With Ss Lid Capacity Not Less Than 1L Of Korken Brand Or Similar , Supply Of Premium Storage Clear Glass Jar With Ss Clamp Lid Capacity Not Less Than 0.75L Of Korken Brand Or Similar , Supply Of Premium Storage Clear Glass Jar With Ss Clamp Lid Capacity Not Less Than 0.75L Of Korken Brand Or Similar , Supply Of Premium Spice Container Clear Glass Jar With Ss Clamp Lid Capacity Not Less Than 0.75L Of Korken Brand Or Similar , Supply Of Premium Quality Regal Luxe Huron Bamboo Chopping Board With Handle Or Similar , Supply Of Medium Quality Fine Ceramic Cup Soucer Set, 6 Nos. Cup & 6 Nos. Soucer , Supply Of Medium Quality Fine Bone China Cup Soucer Set, 6 Nos. Cup & 6 Nos. Soucer , Supply Of Premium Quality Kilner Premium 2L Universal Airtight Clear Glass Jar With Push Top Lid Or Equivelant For Dry Food Like Grains, Spices, Pulses And Cereals, Transparent, Bpa Free, Reusable Kitchen Storage Container, Fridge Safe , Supply Of Premium Quality Kilner Premium 1.5L Universal Airtight Clear Glass Jar With Push Top Lid Or Equivelant For Dry Food Like Grains, Spices, Pulses And Cereals, Transparent, Bpa Free, Reusable Kitchen Storage Container, Fridge Safe , Supply Of Imported Quality Microwave Safe & Oven Safe Square Glass Baking Dish With Lid (Transparent, 500 Ml + 800 Ml + 1.6 L) - Set Of 3 Of Approved Brand. , Supply Of Imported Quality Storage Container (800 Ml X 3) Square Glass Food Storage Container Set With Air Tight Lid, Microwave & Dishwasher Safe, Transparent Of Approved Brand. , Supply Of Imported Quality Rectangular Glass Food Storage Container, 1900 Ml - Set Of 3, Airtight, Microwave & Freezer Safe, Transparent Of Approved Brand. , Supply Of Borosil 3Pc Storage Jar Set With Bamboo Lid (600Ml + 950Ml + 1.3L), For Kitchen Multipurpose Organizer For Cookie & Dals , Supply Of Borosil Klip N Store (370Ml X 4) Or Similar Brand Rectangle Glass Food Storage Container Set With Air Tight Lid, Microwave & Oven Safe, Transparent. , Supply Of Stainless Steel Ladle 34 Cm Long Handle, Deep Bowl 8 Cm Serving Spoon For Dal, Curry, Soup, Gravy Of Approved Brand. , Supply Of Seasoning Set Glass Container Bottle For Dining Table Salt & Sugar Of Approved Brand. , Supply Of Agaro Majestic 3 Pcs Knife Set For Kitchen Made Of High Carbon Stainless Steel, Non-Slip Pp Handle, Cooking, Cutting, Slicing, Utility, Paring, Home And Restaurant Use, Silver Or Similar Brand. , Supply Of La Opala Diva Ivory Collection Opal Glass Crockery Or Equivelant , Vegetable Bowl 180 Ml Set Of 6, Golden Fall Design, Microwave Safe, 100% Vegetarian, Light & White. , Supply Of Borosil Or Similar 900Ml Gosports Black Stainless Steel Bottle, Isi Certified, Double Wall Vacuum Insulated Flask, 14 Hours Hot & 18 Hours Cold, Leakproof, Bpa Free , Supply Of Export Quality Handcrafted Matte Finish White Ceramic Dinner Set, 21 Pieces Serving For 6, Microwave And Dishwasher Safe, Bone-Ash Free, Of Approved Design Dinner Set Of Earth Store Or Similar. , Supply Of Premium Quality Stainless Steel Double Mesh Tea Strainer. , Supply Of Premium Quality Made With Heavy Ss Bars Utensil Basket Of Size (64X47x23) With Drain Tray And Cutlery Stand Of Approved Brand. , Supply Of Premium Quality Bonkaso Brand 25L Stainless Steel Perforated Dustbin (12×20 Inch), Open Top Trash Bin Without Lid, Rust Proof Suitable For For Home, Kitchen, Bathroom, Silver Finish Or Similar Brand. , Supply Of Premium Quality Borosil Vision Or Similar 6Pc Set Drinking Glass Tumblers For Water, Cold Drinks, Juice, (Transparent, 350 Ml) , Supply Of Borosil Or Similar 1.35L Breeze Grey Glass Jug With Acacia Wood Lid, Borosilicate Glass Water & Juice Pitcher, Elegant As Approved By The Engineer-In-Charge. , Supply Of Agaro Or Equivelant Elegant Glass Jug With Lid, 1.1L, Easy Pour Spout & Strong Handle Of Approved Design. , Supply Of Premium Quality 6 Pcs Set Anti-Skid Tea/ Water Coaster With Holder Of Kuber Ind. Or Similar Make. , Supply Of Vigneto Fleur Or Similar Make Cup And Saucer Set (Classic Gold) For Tea/ Coffee Set Of 6 Cup & 6 Saucers 190 Ml, Finest Imported Premium Porcelain Made As Approved By The Engineer-In-Charge. , Supply Of Tea Pot Set Of Earth Store Handcrafted Ceramic Stag Blue Tea Cup Set With Kettle Or Similar Make 6 Tea Cups & 1 Kettle As Approved By The Engineer-In-Charge. , Supply Of Crystal Oval Medium Stainless Steel Serving Spoon, Silver Colour, Heavy Duty. , Supply Of Electric Rechargeable Plasma Gas Lighter Suitbale For Home Use Gas Stove, C-Type Usb, Multi Purpose - 360° Flexible & Windproof, Black In Colour. , Supply Of Tex-Ro Stainless Steel Dish Drying Rack For Kitchen With Drainer Tray & Cutlery Holder, Of Size 56X43x23 Cm, Chrome Finish. , Supply Of Oil Dispenser For Kitchen Stainless Steel, Leakproof, Silver Finish Of Approved Brand. , Supply Of Medimix Bathing Bar Soap Pack Of 4 Nos. , Supply Of Lux International Bouncy & Bright Bathing Soap, 130Gm Of Cherry Blossom Fragrance. , Supply Of Softouch Toilet Tissue Roll 3 Ply Toilet Paper, Made With High Gsm Paper Super Absorbent, Soft On Skin, 100% Virgin Paper. , Supply Of All Out Ultra Mosquito Repellant Of 1X2 Refills Pack. , Supply Of All Out Ultra Liquid Vaporizer, Machine + 1 Refill (45Ml). , Supply Of Baygon Mosquito & Fly Killer Spray- 400 Ml, Green , Supply Of Phool Jhadu/ No Dust Broom 2 In 1 With Extendable Handle For Ceiling And Floor Cleaning, Long Handle Jhadu , Supply Of 15 Ltr Stainless Steel Plain Pedal Bin With Lid, Round Shape Of Size (10 * 15 Inch) Of Approved Make. , Supply Of 20 Ltr Plastic Bucket, Made Of Strong And Transperant Plastic Material Of Approved Make. , Supply Of Flair Estella Plastic Bath Mug - Durable, Lightweight & Stylish - Ideal For Daily Use In Bathroom (Size, 1 Ltr) , Supply Of Earthy Fables Soft Microfiber Rectangular Door Mat - Cut Pile, Quick Dry, Anti-Skid, Water Absorbent, Non-Slip, For Bathroom, Bedroom, 60X40 Cm - Grey In Colour. , Supply Of Premium Plastic Clothes Hanger For Wardrobe - Non Slip Grip, Ultra Thin Space-Saving Design, Light Weight & Durable Closet Organizer For Shirts, Dresses, Coats And Trousers , Supply Of Borosil Vision Classic Medium Glass (305Ml, Transparent) -Set Of 6 , Supply Of Frosted Glass Multi Purpose Liquid Soap Dispenser Bottle Suitable For Bathroom And Wash Basin , Supply Of Handmade Wooden Lotus Tea Coaster With Half Barrel Shape Stand (3.5 Inch) - Set Of 6 , Supply Of Phuljhadu/ Natural Grass Broom Stick Eco-Friendly Long Handle, Anti Dust, Durable As Approved.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
5.
Heavy Industries and Public Enterprises #11307960 Technical Bid
Tender for Inviting Rates For Spare Parts And Repairing/Servicing Of Laptop/Computer/Printer/Ups, Different Types Of Cable For Computer Hardware, Stationary Items, General Items, Printer Cartridge, Photocopy And Rented Vehicle & Coolers. , Head Name - Computer Hardware , Com&Lap - Antivirus 1 Years , Com&Lap - Antivirus 3 Years , Com&Lap - Bios Battery , Com&Lap - C - Port To Hdmi , Com&Lap - C - Port To Lan , Com&Lap - Cabinet - Atx , Com&Lap - Cordless Keyboard , Com&Lap - Cordless Mouse , Com&Lap - Cpu Cooling Fan , Com&Lap - Desktop Computer Ram Ddr21gb , Com&Lap - Desktop Computer Ram Ddr22gb , Com&Lap - Desktop Computer Ram Ddr24gb , Com&Lap - Desktop Computer Ram Ddr32gb , Com&Lap - Desktop Computer Ram Ddr34gb , Com&Lap - Desktop Computer Ram Ddr48gb , Com&Lap - Desktop Harddisk 128 Gb , Com&Lap - Desktop Harddisk 256 Gb , Com&Lap - Desktop Harddisk 512 Gb , Com&Lap - Desktop Harddisk 1Tb , Com&Lap - Desktop Mother Board Board 945 , Com&Lap - Desktop Mother Board I3 , Com&Lap - Desktop Mother Board I5 , Com&Lap - Desktop Mother Board I7 , Com&Lap - Desktop Processor C2d , Com&Lap - Desktop Processor Dual Core , Com&Lap - Desktop Processor I3 , Com&Lap - Desktop Processor I5 , Com&Lap - Desktop Processor I7 , Com&Lap - Dvd Writter For Desktop , Com&Lap - Formating Charges , Com&Lap - Keyboard - Pin , Com&Lap - Keyboard - Usb , Com&Lap - Lan Card (Usb To Lan) , Com&Lap - Laptop Battery , Com&Lap - Laptop Charger , Com&Lap - Laptop Dvd Writter , Com&Lap - Laptop Harddisk 128 Gb , Com&Lap - Laptop Harddisk 256 Gb , Com&Lap - Laptop Harddisk 512 Gb , Com&Lap - Laptop Harddisk 1Tb , Com&Lap - Laptop Keyboard , Com&Lap - Laptop Processor & Board , Com&Lap - Laptop Ram Ddr2 1 Gb , Com&Lap - Laptop Ram Ddr2 2 Gb , Com&Lap - Laptop Ram Ddr2 4 Gb , Com&Lap - Laptop Ram Ddr3 2 Gb , Com&Lap - Laptop Ram Ddr3 4 Gb , Com&Lap - Laptop Ram Ddr4 4 Gb , Com&Lap - Laptop Ram Ddr4 8 Gb , Com&Lap - Laptop Touchpad , Com&Lap - Mouse Pad , Com&Lap - Mouse- Pin , Com&Lap - Mouse - Usb , Com&Lap - Pce Lan Card , Com&Lap - Pendrive 32 Gb , Com&Lap - Pendrive 64 Gb C Type Usb3.0 Otg , Com&Lap - Pendrive 64 Gb , Com&Lap - Smps 450W , Com&Lap - Smps 650W , Com&Lap - Smps Slim 450W , Com&Lap - Ssd 256 Gb Laptop And Desktop , Com&Lap - Ssd 512 Gb Laptop And Desktop , Com&Lap - External Ssd 256 Gb For Laptop And Desktop , Com&Lap - External Ssd 512 Gb For Laptop And Desktop , Com&Lap - External Ssd 1 Tb For Laptop And Desktop , Com&Lap - External Ssd 2 Tb For Laptop And Desktop , Com&Lap - External Ssd 4 Tb For Laptop And Desktop , Com&Lap - Ssd Nvme 256 Gb Laptop And Desktop , Com&Lap - Ssd Nvme 512 Gb Laptop And Desktop , Com&Lap - Ssd Nvme 1 Tb Gb Laptop And Desktop , Com&Lap - Usb Extension 4 Port , Com&Lap - Crt Est , Com&Lap -Crt Memory Ic Chip , Com&Lap - Crt Picture Tube , Com&Lap -Crt Power Supply Unit , Com&Lap -Crt Repairing & Service Charge , Com&Lap - Tft Picture Gum , Com&Lap - Tft Power Supply Unit , Com&Lap -Tft Repairing & Service Charge , Com&Lap - Tft Screen , Com&Lap - Cat6 Cable , Com&Lap - Convertor Hdmi To Vga , Com&Lap - Convertor Vga To Hdmi , Com&Lap - Power Cable For Desktop , Com&Lap - Power Cable For Laptop , Com&Lap - Power Cable For Printer , Com&Lap - Data Cable For Printer , Com&Lap - Vga Cable For Desktop , Com&Lap - Hdmi Cable 1 Mtrs , Com&Lap - Hdmi Cable 3 Mtrs , Com&Lap - Hdmi Cable 5 Mtrs , Com&Lap - Hdmi Cable 10 Mtrs , Com&Lap - Hdmi Cable 15 Mtrs , Com&Lap - Hdmi Cable 30 Mtrs , Com&Lap - Wifi Usb Mini Adapter , Usb To Rj 45 Ethernet Lan Adopter , C Type To Rj 45 Ethernet Lan Adopter , Com&Lap - Ms Office Home & Student 2021 , Com&Lap - 19 Inch Monitor (Tft) , Com&Lap - 27 Inch Monitor (Led) , Entry Level Printer - Adf Pickup Pad , Entry Level Printer - Drum Unit , Entry Level Printer - Ccd Unit , Entry Level Printer - Cap Hinges , Entry Level Printer - Control Pannel , Entry Level Printer - Dc Controller , Entry Level Printer - Drum Blade , Entry Level Printer - Fuser Unit , Entry Level Printer - Fuserdrum Gear , Entry Level Printer - Gear Assembly Unit , Entry Level Printer - Hbps Card , Entry Level Printer - Heat Roller , Entry Level Printer - Logic Card , Entry Level Printer - Lsu Unit , Entry Level Printer - Megnet , Entry Level Printer - Motor , Entry Level Printer - Paper Tray , Entry Level Printer - Pick Pad , Entry Level Printer - Pressor Roller , Entry Level Printer - Repairing & Service Charhes , Entry Level Printer - Scanner Unit , Entry Level Printer - Sensor Unit , Entry Level Printer - Sepration Paid , Entry Level Printer - Smps , Entry Level Printer - Teflon , Entry Level Printer - Solenoid (Relay) , Mfd Printer - Adf Pickup Roller , Mfd Printer - Drum Unit , Mfd Printer - C.C.D Unit , Mfd Printer - Cap Hinges , Mfd Printer - Control Pannel , Mfd Printer - Dc Controller , Mfd Printer - Drum Blade , Mfd Printer - Fuser Unit , Mfd Printer - Fuserdrum Gear , Mfd Printer - Gear Assembly Unit , Mfd Printer - Hbps Card , Mfd Printer - Heat Roller , Mfd Printer - Logic Card , Mfd Printer - Lsu Unit , Mfd Printer - Megnet , Mfd Printer - Motor , Mfd Printer - Paper Tray , Mfd Printer - Pick Roller , Mfd Printer - Pressor Roller , Mfd Printer - Repairing & Service Charhes , Mfd Printer - Scanner Unit , Mfd Printer - Sensor Unit , Mfd Printer - Sepration Paid , Mfd Printer - Smps , Mfd Printer - Teflon , Mfd Printer - Solenoid (Relay) , Ups - Invertor Card , Ups - Battery Charger (Heating Bridge) , Ups - Mospet , Ups - Resistance , Ups - Main Power Transformer , Ups - Capicitor , Ups - Inductor , Ups - Diode , Ups - Ic555 , Ups - Ic808 , Ups - Invertor Switch , Ups - Repairing & Service Charges Per Ups 500Va /650Va/ 750Va / 800Va/1000 Va , Ups - Battery - 7 Ah, 12 Volts, Smf , Head Name - Stationery Items , Printing Paper A4 (75 Gsm) , File Cover (Card Board Office File Cover, Paper Size: Fullscape) , File Pad (Cardboard Office File Pads) , All Pin Stanless Steel , Whitener Correction Pen 4 Inch , Pencil Black 6 Inch , Stapler Pin No 10 1M , Stapler Pin No 24/6 1M , Stapler N10 , Size: 4 Inch , Stapler Hp 45, Size: 7 X 3 X 17.5 Centimeters , Stapler Heavy Duty ,Stapling Capacity: 210 Sheets , Stapler Pin 23/10-H , Note Sheet Paper A4 Size , U Shape Paper Pin/Gems Clip , Stamp Pad Blue For Stamping Purpose Size 110Mmx70mm , Stamp Pad Blue For Stamping Purpose Size9.5 Cm X 5 Cm , Envelope White Paper For Letter, Courier And Documents, 90 Gsm, Size - 9 X 4 Inches , Envelope Yellow Inside Laminated11x5 Inch , White Board Marker Pen , Highlighter Pen For Marks Highlight Text-Line , Notes Paper Flags Re-Stick (25Mm X 75Mm) - 4 Colours , Magnetic Pin Cushion 7X4(Hxl)Mm , Stock Book With Amount Column - Hard Bound - Register Size - 32 X 20 Cm (90 Pages - Pack Of 1) , Gum Bottle 300Ml , Gum Bottle 700Ml , File Tag Thread Green 20 X 18 X 1 Centimeters (100 No) , File Tag Thread For Paper Binding - 6 Inch, White (100 No) , Dak-Pad (F/S Or Legal Size: 14.5 X 10 Inch) , Invert/Dispatch Register Etc. (Dispatch - 72Gsm 275 Pages) , Single Line Long Register (100 Pages) , Register 6Qr 16X26 Cm 400 Pages , Register 4Qr 16X26 Cm 200 Pages , Register 8Qr , 80 Gsm , Rubber Eraser For Pencil (Pack Of 10) , Bill Register 65 Gsm Green Ledger Paper, - Dimensions: 19.5 X 32.5 Cm( 4 Qr) , Shorthand Copy 100 Pages , Poker(Tocha) Plastic Handle 8 Inch , Steel Scale 12 Inch , Plastic Scale 12 Inch , Gel Pen 0.55Mm 10Pen Box Pack , Motor Vehicle Log Book - Hard Bound - 20 X 16 Cm , Self Adhesive Transparent Tapes 2.5Inchx65meters , Cello Tape 1 Inch 65M (Transparent) , Self Adhesive Brown Cello Tape - 100 Meters In Length - 48Mm / 2 Width , Glass Paper Weight 51D X 40W X 51H Millimeters , White Correction Fluid 15Ml , Daily Attendance Register, 75 Pages , Desk Table Plastic 15 X 21 Inch Top With Foldable Transparent, Adjustable 7Mm Writing Desk Stand, Z-Type , Desktop Calculator 150 Steps Check And Correct With Tax & Gt Keys & On Display Indication Of Active Constant , Glue Stick 25Gm , Ball Pen 0.7 Mm , Plastic L Folder, Clear Transparent Size Legal, F/S, ( Set Of 10 Pcs ) , Multicolor Plastic Envelope File Folder 13 Inch X 11 Inch , Leather, Foam Convocation File Folder, A4 , Register 3Qr , Register 2Qr , Executive Diary (75 Gsm Dual Color), B5 Size, Dated Diary , Pen Stand Compartments Wooden With Visiting Card & Mobile Holder For Office Table (Min Size 175 Mm, 75 Mm, 100 Mm) , Contingent Register-200 Folio , Paper Cutter 9Mm , Metal Binder Clip Double Clip Size 51 Mm , Pencil Sharpener Steel Blade , Cash Book As Mptc 5, A3 Size, 100 Pages, Min 80 Gsm Paper , Single Line 5 Subject Spiral Notebook (14 X 21.6 Cm) 70 Gsm , Envelope Laminated Yellow Paper Legal Size | Poly Laminated Inside | 10 X 14 Inch , Envelope Laminated Yellow Paper A3 Size | Poly Laminated Inside | 10 X 14 Inch , A4 Size Envelop Laminated Yellow10 X 12 Inch , Letter Head 125 Gsm, White , Colour Flag 3 X 3 , Visiting Card , Cartridge Sheet (140Gsm) , Sketch Pen 12Shade Multi Colour , Jute Folder (A4 Size) , Leather Multipurpose File Folder (A4 Size) , Jute Office Bag ( 38L X 10W X 30H Cms ) , Bond Paper A4 (100 Gsm) , Colour Copy & Printing Paper A4 (100 Gsm) , Excellence White Printing Paper A4 (100 Gsm) , Paper Sheets A4 (140 Gsm) , Punching Machine 1 Hole, Punching Capacity : Minimum 60 Sheets , Punching Machine 2 Holes, Punching Capacity : Minimum 20 Sheets , Punching Machine 2 Holes, Punching Capacity : Minimum 60 Sheets , Poker (Tocha) Metal Handle 8 Inch , Scissors Steel 5 Inches , Scissors Steel 9 Inches , Head Name - General Items , Milk Powder For Tea 500 Gram Pack , Packaged Drinking Water 200 Ml , Packaged Drinking Water 500 Ml , Packaged Drinking Water 1 Ltr. , Green Tea - Detox/Desi Kahwa, 25 G (10 Bags X 2.5 G Each) , Honey Lemon Green Tea Bags, 35 G (25 Bags X 1.4 G Each) , Biscuit Butter/Cashew/ 50G Pack , Biscuit Tastier Sweet-Salty Crackers 75G Pack , Biscuits High Fibre 100G Pack , Sugar Cube, 500 G Pack , Sugar , Tea Premium With Long Leaves 500G , Coffee Pouch, 1Pcs Instant Coffee(60 X 1.67 G) , Samosha/Kachori , Khaman Dhokla 2 Pcs. , Chips 100 Gram , Mithai 500 Gram , Buttermilk (Matha/Chach) 250 Ml. , Namkeen 50 Gram , Lunch Or Dinner Thali ( Daal, Rice, Paneer Sabzi, Seasonal Veg, Curd Item, 5 Tawa Rotis, 1 Pcs. Sweet & Salad ) , Tea Cup Bone China White Color Gold Design 160 Ml , White Tea Cup Set Of 6, , Plate Bone Ash Free Quarter Plate 7.5(6 Pcs) , Serving Tray Platter Rectangular Plastic Tray 35L X 25W X 4H Centimeters , Electric Kettle 1.8L, Stainless Steel Inner Body - Auto Power Cut, Boil Dry Protection & Cool Touch Double Wall, Portable | 1500 Watts, Size- 24L X 20W X 28H Centimeters , Electric Kettle, Stainless Steel Quick Boil, 1 Ltr, 7.9L X 6.3W X 7.9H Centimeters , Transparent Water Glass Set Of 6 Pcs (300 Ml Each) Large Flame Proof Round Shape Glasses , Spoon Stainless Steel Set Length 16.6Cm (Medium, Set Of 12) , Tissue Paper 30X27 Cm (100 Sheets Per Pack) , Facial Tissue 2 Ply Soft Pack - 200 Pulls , Dishwash Bar, 125G , Air Freshener 48 G (Pack) , Room Freshener Spray (220 Ml) , Detergent Bar, 110 G , Mosquito Vaporiser Refill + Machine - 45Ml , Liquid Vaporiser Mosquito Repellent Refill 45 Ml , Tea Strainer Chai Chalni Stainless Steel , Thermos, Thermo Steel Vacuum Insulated 24 Hours Hot Or Cold Carafe, 1000 Ml , Handwash Refill - Skincare Hand Wash- 1500Ml Pack , Dishwash Liquid , 250 Ml Bottle , Men Raincoat Free Size , Umbrella- 54 Inch Heavy Duty , Pre Ink Stamp Small 1.2Cmx3.6Cm , Pre Ink Stamp Size 2.1Cmx5.7Cm , Cell Carbon Zinc Aa Battery - 10 Pieces , Cell Aaa Batteries - Pack Of 10 , Nameplate Fiber 6 X 12 , Double Side Name Plate , Name Plate Big Size 10 X 12 , Door Bell (Wireless) , Door Locks (Tala) , Plastic Open Dustbin, (8 L) , Plastic Pedal Dustbin , 10 L , 9 Watt Led , 12 Watt Led , Tube Light Led (15 Watt) , Electric Cable(3Colour) , Cooler Pad, Khus (4 Feet) , 3 Pintop (5A) , 3 Pintop(15A) , Gi Wire (1Kg) , Modular Socket (5Amp) , Socket Modular (5Amp) , Extension Board - 5 Power Sockets, 15 Amps 2Mtr , Extension Board - 5 Power Sockets, 15 Amps 3Mtr , Extension Board - 5 Power Sockets, 15 Amps 5Mtr , Wire 3 Cable Core , Office - Identity Card Pvc (Standard Size) With Card Holder & Strap , Round White Disposable Paper Plates Size : 6 Inches (Pack Of 50 Plates) , Disposable Wooden Spoons Length : 14 Cm. (Pack Of 100 Pcs.) , Head Name - Printer Cartridge (Original) , Toner Cartridge Canon 303 , Toner Cartridge H.P. 12A , Toner Cartridge H.P. 53A , Toner Cartridge H.P. 36A , Toner Cartridge H.P. 16A , Toner Cartridge Samsung108/104 , Toner Cartridge Samsung 1640 , Toner Cartridge Samsung 4720/1610 , Toner Cartridge Samsung 209 , Toner Cartridge Samsung 2161 , Toner Cartridge Samsung Scx 4521 Fs , Toner Canon Mf 248Dw , Toner Canon Mf 271 Dn , Hp Laser Jet M1212 Nf Mfd , Toner Canon 051 , Toner H P 77A , Toner H P 88-A , Toner Samsung 1043 , Toner Samsung 205 , Toner Canon 328 , Toner Canon 925 , Toner Cartridge Canon 326 , Toner Cartridge Samsung 101 , Toner Cartridge Samsung 116 , Toner Cartridge Canon 337 , Toner Cartridge Hp Lajer Mfp-136A , Toner Cartridge H.P. 110A , Toner Cartridge H.P. Mfd - 2606Dn , Toner Cartridge Brother- B-700D , Toner Cartridge H.P. Tower- 136A , Toner Cartridge - Canon - Image Class -Mf284dw - Cartridge- 072 , Toner Cartridge - Canon - Image Class -Mf271dn - Cartridge- 071 , Toner Cartridge - Canon - Image Class -Mf289dw , Toner Cartridge - Canon - Image Class -Mf643cdw - Cartridge- 054 (Kycm - Each) , Canon Ir 222N-Nb59 , Hp- Laser Jet -Mfp M-233Sdw , Samsung Mlt B48c602160 , Samsung Ml2161 , Samsung Ml 1640 , Samsung Scx 4521 Fs , Canon Mf 248 Dw , Canon Mf271dn , Canon Lbp 122 D , Canon Vrf 273 , Canon Mf 4820D , Canon Mf 240 4F Riit , Canon Image Class Mf 4820 D , Canon Lbp 6018 B , Canon Ic Mf 4820 D , Canon Ic 271 Dn , Canon Ic 241 Dw , Canon Image Runner 224 N , Canon Ic Lbd 122 Dw , Canon Mf 240 Series , Canon 643C Dw , Toner Cartridge 3060 , Image Class Mf 2410 , Image Class Mf 24 1 Dw , Image Class Mf-284Dw , Brother Dcp B7500d , H.P. Laser Jet Mfp M 4360N , H.P. Laser Jet Mfp 136 A , H.P. Laser Jet Tank Mfp 2606 Oix , H.P. Laser Jet M 1213 Mfd , H.P. Mf486 Dw , H.P. Toner Cartridge 158 , Toner Cartridge Brother 3060 , Toner Cartridge Hp -Mfp 436 Dn , Toner Cartridge Brother -B021 , Head Name - Photo Copy , Photo Copy On A4 Size Paper (With Min 75 Gsm Paper) , Photo Copy On A3 Size Paper (With Min 75 Gsm Paper) , Colour Printing Work On A4 Size Paper , Spiral Binding With Binding Covers A4 Size , Head Name - Rented Vehicle , Monthly Charge Of Vehicle For Maximum 800 Km (Sedan Car Of Max. Rs. 7.00 Lakh Ex Showroom Price) , Variable Charge For Journey Outside Headquarter Or Within Headquarters Beyond Maximum Limit , Head Name - Rented Cooler , Monthly Charge Of Air Cooler, Tank Capacity: 40 Ltr., Isi Marked , Monthly Charge Of Air Cooler, Tank Capacity: 75 Ltr., Isi Marked
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
Madhya Pradesh View Result →
6.
Power #11208768 AOC
Bids Are invited for Purchase Of Office Furniture Executive Table - Main Desk Of Size 3000X1050x750 Premium All Wood Suite Made Of Scratch And Stain Resistant Polyseter Coated Vaneer Top , Executive Side Return Unit - Eru Of Size 1500X600x610 With Inbuilt Display Mount Supports Of 43Inchs , Executive Back Unit - Back Unit Of Size 2400X470x2325 In Pebble Stone Finish , Executive Chair - High Back Revolving Chair With Track Back Technology With 3 Positions Tilt Limiter,Die Cast Aluminium Pedestal,4D Adj Arms,Seat Slide Mechanism In Premium Leather Finish. , Executive Chair - Full Back Revolving Chair With Track Back Technology With 3 Positions Tilt Limiter,Die Cast Aluminium Pedestal,4D Adj Arms,Seat Slide Mechanism In Fabric Finish. , Vip Sofa - 3 Seater Sofa With Solid Wood Frame, Pigmented Leather/Leatherette Upholstery, Conjugated Fiber Filler In Backrests. S-Spring Webbing For Bounce, Soft Foam Seats, And Cushioned, Ergonomic High Backrests.Size 201X93x89 , Coffee Table - Rectangular Table Featuring A 10 Mm Thick Tempered Glass Top With A Walnut Or Cherry Finish Dual-Level Storage Shelves Table Size 100X45x65 , Executive Table - Premium Suit Table Of Membrane And Laminate In Tobacco Ash And Black Including Eru,Pedestal Of Size 2350X2350x750 , Executive Back Unit - Back Unit Of Size 2350X500x1800 In Membrane And Laminate Finish , Executive Chair - Full Back Revolving Chair With Track Back Technology With 3 Positions Tilt Limiter,Die Cast Aluminium Pedestal,4D Adj Arms,Seat Slide Mechanism In Premium Leather Finish. , Executive Chair - Mid Back Revolving Chair In Pure Leather Upholtery With Active Bio Synchro 5 Positions Tilt Mechanism,Die Cast Polished Aluminium Pedestal , Vip Sofa - 3 Seater Sofa Featuring Pinewood Construction, Synthetic Leather Upholstery, And Sinuous Spring Support Curved Armrests, Elevated Design Size 175 X 86 X 84 , Coffee Table - Rectangular Table Featuring A 10 Mm Thick Tempered Glass Top With A Walnut Or Cherry Finish Dual-Level Storage Shelves Table Size 100X45x65 , Executive Table - Desking Suit Having Attached Eru,Pedestal,Buit In Keyboard Tray And Cpu Space Of Size 1800X 790X760 , Executive Back Unit - Back Unit Of Size 2350X500x1800 In Membrane And Laminate Finish , Executive Chair - High Back Revolving Chair In Pure Leather Upholtery With Active Bio Synchro 5 Positions Tilt Mechanism,Die Cast Polished Aluminium Pedestal , Executive Chair - Non Revolving Chair In S-Type Frame In Spacer Fabric Of Size 60.9X64.3X98.2 , Vip Sofa - 3 Seater Sofa Featuring Pinewood Construction, Synthetic Leather Upholstery, And Sinuous Spring Support Curved Armrests, Elevated Design Size 175 X 86 X 84 , Staff Table - Desking Of Size 1200X600x750 Having Kbpt Channel,3Drawer And Cpu Space , Almirah - Durable 2-Door Steel Cupboard Made Of High-Yield Crca Steel, Featuring A Powder-Coated Finish And A 3-Way Bolting Mechanism With A 6-Lever Lock,Mazak Material Handle. Size 1981X916x486 , Confrence Table - Modular Confrence Table With Wire Management Of 18 Seating Capacity In Laminate Fininsh , Executive Chair - High Back Revolving Chair In Pure Leather Upholtery With Active Bio Synchro 5 Positions Tilt Mechanism,Die Cast Polished Aluminium Pedestal , Confrence Chair - Mid Back Revolving Chair In Pure Leather Upholtery With Active Bio Synchro 5 Positions Tilt Mechanism,Die Cast Polished Aluminium Pedestal Total Quantity : 62
Contract Date: Ref. Documents Contract Value : 46.08 Lakh
Government Departments No of Bidders 11
7.
Public Administrative Department #11202909 Technical Bid
Tender for Supply And Fixing Of Sanitary Napkin Vending Machine And Incinerators For Various Schools, Colleges, Hospitals, Sulabh Complex, Public Places Etc , Supply And Fixing Of Sanitary Napkin Vending Machine And Incinerators For Various Schools, Colleges, Hospitals, Sulabh Complex, Public Places Etc Technical Specification Of Sanitary Napkin Vending Machines: 1 Machine Type :Fully Automated, Electronic Model, Programmable,Customizable, Electronic Data Retrievable 2 Mounting Method : Wall Mounting 3 No. Of Product Columns : Two Vertical Spiral 4 Product Storage Capacity : Total 50 Napkins Packed In A Pack Of 1S 5 Dimensions (Wxdxh) Mm : 750 X 175 X 450 Mm 6 Weight : 18 Kgs 7 Construction : Made Out Of 1.1 Mm Thick Crc Anti-Corrosive Powder Coated 8 Design : Aesthetically Well Designed With Sleek Cabinet 9 Electrical : 220V /50 Hz / 15 annual periodical maintenance ,All Motors And Boards Operate On Dc 10 Vending Mechanism : Vends One Products, Upon Selecting A Product And Inserting The Required Coins Fully Electronic Coin Acceptor 11 Coin Acceptance : Accepts Six Different Variants Of Coins, Accepts Multiple Coins To Reach The Desired Value, Easily Programmable For Any New Coins In Field 12 Programming Feature : Pricing - Programmable In Field 13 Stock Out : No Stock - Lock Out Provision, If User Presses The Button, And There Is No Stock Then Display Will Show No Stock And Even If Any User Puts In Money, It Will Be Refunded 14 Customizable : Mechanically Customizable For Any Product Dimension- Easily In Field 15 Sales Data Collection : Complete Sales Data Can Be Collected In Micro- Sd Card And Can Be Viewed In Ms Excel On Computer 16 Additional Built-In Features Available : Gsm Based Online Connectivity - Optional 17 Accessibility For Free Vending Utility Service : Token / Without Token Technical Specification Of Incinerators: 1 Type Of Machine Fully Automatic 2 Purpose To Burn Scientifically Used Napkin Pads 3 Type Of Fitting Wall Mountable 4 Operation Mode Electrical / Electronic 5 Width(Mm) 300 Mm 6 Depth(Mm) 250 Mm , 7 Height(Mm) 625 Mm 8 Weight(Kg) 20Kg 9 Material Of Housing Cabinet Mild Steel (Crca Steel) 10 Operating Power Source Electrical 11 Input Power Supply 220V+/-10%, 50Hz, Ac-15 annual periodical maintenance 12 Power Consumption(Watt) 1200 13 Warranty (Years) 1 Year 14 Iso 9001 For Manufacturing Premises Yes 15 Ce Certification Yes 16 Emission Conformity To Solid Waste Management Act Yes 17 Thick Of Thermal Insulation Material 25-40 Mm 18 Flexible Emission Outlet Pipe Dia Mm 50 19 Material Of Thermal Insulation High Density Ceramic Board 20 Burning Capacity /Day(No.Of Napkins) 150-200 21 Burning Capacity/Cycle(N0.Ofnapkins) 15-20 22 Burning Time Of Full Capacity Napkins/ 40 Minutes 23 Loading Type Front Loading 24 Number Of Chambers Two 25 Temperature Display Lcd 26 Temperature Of Both Chambers Yes, Displayed 27 Detachable Ash Tray Yes 28 Emission Outlet Pipe Location Top Of Machine 29 Means Of Connecting The Unit Outlet Clamped With Usage Emission Pipe 30 Type Of Door Lock Provided Latch Type 31 Auto Cut-Of- Temperature Display Yes 32 Auto Start Yes 33 Min Burning Temperature (Degree C) Below 500 Degree 34 Min Flue Gas Treatment Temp ( C) 950 Degree 35 Residue Ash Per Napkin (Gms) 1
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 1
8.
Public Administrative Department #11142241 AOC
Construction And Carry Out Ancillary Works For Urban Ayushman Health Temples (Uhwc) In Porta Cabins At 14 Places In The Jurisdiction Of Thane Municipal Corporation.-1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. :Means Bd.A.1 Page No.259 2 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 3 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 4 Transportation of excavated material including loading and unloading etc. complete. (c) lead up to 5 km) 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 6 Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. 7 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 9 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use).Spec. No As director by engineer incharge. Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Spec. No As director by engineer incharge. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. 14 Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 15 Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. 16 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. cover of 75 Kilogram with lid and frame fixed in cement concrete.. Spec. No. 17 Providing and laying in trenches 25 mm dai. UPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 18 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) 19 Providing and making ISI Mark ferrule connection of 25mm dia.to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. 20 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 21 Supplying, erecting, testing and commissioning of minimum three and above star rated centrifugal water pump (monoblock),230 V,single phase,50 Hz,AC.supply of 0.375kw/0.5 HP with discharge 36/9 lpm for head of 6/21 m & 25 mm suction /25 mm delivery pipe on provided CC foundation as per specification no.WP.CGP. 22 Supplying, installing and testing earthing with copper earth plate 30 x 30 x 0.315 cm complete with all accessories of copper materials and recording the results as per specification no.Ea-EP Supplying, & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 Kg.capacity cartridge type conform to IS 2878/15683 complete erected with necessary clamp made from 50 x 6 mm M.S. flat with nut & bolts rounded in wall complete. Supplying, & erecting Hand dryer machine having speed jet of warm air with low noise blower to quick dry wet hands,power 1800 W,voltage 230V,50 Hz.Automatic cut off after 5-10 second. Providing,Supplying and fixing electrical meter with all necessary accessories,required cable for connection from main supply including required permission from MSEDCL,TORRENT and Local authorities.(The contractor shall submit the original receipts of payments made to MSEDCL, Torrent Power co.The payments will be made as per the actual expenses made by contractor for each permission and purchasing of electric meter.) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying and laying (including excavation) 50 mm outside dia double wall corrugated pipe (DWC) of HDPE for enclosing cable below ground/road surface to required depth completed Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Providing, Supplying and installation of Porta Cabin Fabricated at Factory Scope of work per cabin shall includes as follows 1. Specification mentioned as below 2. Internal and external arrangement of cabin as per drawings as attached 3. Works of Plumbing, sanitary, electrification, CCTV 4. Furniture as below a. Executive Chairs (as per sr.no.3) - 3 nos, b. Visitor chair (as per sr.no.4) - 6 no c. Two seater chair (as per sr.no.5) – 2 Nos d. Three seater chair (as per sr.no.6) – 5 Nos e. Patient Examination Couch/Table (as per sr.no.8) – 2 Nos f. Storage Cabinet (as per sr.no.9) – 1 Nos g. Table (as per sr.no.10) – 4 Nos h. Table (as per sr.no.11) – 1 Nos i. Medical Store Racks in pharmacy room (as per sr.no.12) – as per drawing j. Trash Bin (as per sr.no.13) – 6 Nos k. Seating tools (as per sr.no.7) – 6 Nos Detailed Description and Specification: Unit Size – L x B x Ht = 30 ft x 20 ft x 9 ft (Clear internal Height) Cabin should be structurally stable and suitable to meet severity of climatic conditions. Sustainable in wind condition of 55m/s- in Seismic zone IV and ambient temperature range (-) 40 degree C to (+) 50 degree C. Bottom Frame 80 x 40 x 2mm GI Rectangular Hollow Pipe (Apollo Make) Stiffener Bottom 50 x 50 x 2mm GI Rectangular Hollow Pipe (Apollo Make) for Shorter Span and 80 x 40 x 2mm for longer Span making the grid of 2ft x 2ft. Please note Base frame shall be quoted with special type of anticorrosive paint to avoid rusting and for better life (i.e. Black Coal Tar Epoxy Paint) Top Frame 80 x 40 x 2 mm GI Rectangular Hollow Pipe (Apollo Make) Stiffener (Top Frame) 50 x 50 x 2mm GI Rectangular Hollow Pipe (Apollo Make) for Shorter Span and 80 x 40 x 2mm for longer Span making the grid of 2ft x 2ft. Please note Base frame shall be quoted with special type of anticorrosive paint to avoid rusting and for better life (i.e. Black Coal Tar Epoxy Paint) Paneling Outside Outside Wall of the cabin shall be made from 16 guage GI sheet with solid color of approved shade, fitted on inside GI pipe framing making the grid of 2ft x 2ft. Paneling Inside Inside wall of the cabin shall be made from 3 MM Thk ACP sheet with aluminum foil thickness of 0.25 mm with solid color of approved shade fitted on inside Gl pipe framing making the grid of 2ft x 2ft. All the ACP joints shall be filled with Black silicon. Wall Panels shall be completely insulated with Glass wool of 48 kg/m3 Density and slab thickness 50mm. Corners Pole 72 x 72 x 3.2mm GI Rectangular Hollow Pipe (Apollo Make) with black coal tar epoxy coating Plumbing Arrangement UPVC concealed internal plumbing system shall be provided with all necessary inlet and outlet points as per the Drawing. External water connection shall be Provided by TMC. Drinking Arrangement Providing and Fixing branded water purifier of make like Aquaguard, Kent, LG or equivalent with all necessary connections, fittings accessories with storage arrangement etc. complete Sanitary Fittings All plumbing and sanitary fittings such as Ceramic Western Commode with seat cover, Ceramic Indian Commode, Ceramic urinal with push pillar cock, Ceramic Wash Basin, Wash basin Push Pillar Cock shall be of brand like Kajaria, Hindware, Paryware or equivalent. All western Toilets must be equipped with jet Spray, 2 in 1 Taps and Flush Tank. Accessories for PWD persons shall be provided in all toilets. (Excluding External Sewerage Connection). Roof Outside Roof Slope 1:2 one way 126 Roof shall be made from 1.2 mm 120 GSM GI sheets of Jindal make, which shall be fully welded and sloped to avoid leakage. All the roof joints shall be covered with 75mm Butyl Vinyl Tape. Roof shall be covered with Heat Resistant paint to maintain low temperature inside the cabin. Roof Gutter Specially designed gutter section shall be provided to drain water at the single side of the cabin. This shall be made from 1.2 mm 120 GSM GI sheet Jindal make including fitting arrangement. False Ceiling False Ceiling shall be made from 3 mm Thk ACP sheet with Aluminium foil thickness of 0.25 mm with solid colour of approved shade fitted on inside GI pipe framing making the grid of 2ft x 2ft. All the ACP joints shall be filled with Black silicon. Flooring Flooring shall be made from 18 mm High Strength Bison board/ Cement fibre sheet, which is covered with 2 mm PVC vinyl flooring for cabin. For toilet Cement sheet shall be covered by 10 mm thick 1 X 2 ceramic tiles which shall be fixed by using tile adhesive and cement mixture of at least 50mm Thk. Doors & Door frame Main Door Flush door 32 mm thick waterproof material with 4mm Glass as per approved design and drawing and door frame shall be made from aluminium Section. Locking arrangement along with D Handles in SS 304, door closer, door stopper etc. Door Size: 5’x 6’ Internal doors shall be sliding doors/ flush door of size as per drawing and as per the specifications decided by engineer-in charge Toilet Door and door frame shall be made from aluminium frame with 4mm Glass and ACP including locking arrangement, Handles in SS 304, Door Size: 2’-6’’ x6’ Windows Powder coated aluminium Two Track sliding windows with 4 mm tinted Glass. Size of windows as per drawings. M.S. Grill of weight @ 20 kg per sqm shall be provided to all windows/louvered window from outside. Curtains of good quality and curtain rod/track with fixtures shall be provided from inside of windows. Insulation False Ceiling and Wall Panels shall be completely insulated with Glass wool of 48 31 Providing, Supplying and installation of Porta Cabin Fabricated at Site Scope of work per cabin shall includes as follows 32 Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm, skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. 33 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 34 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 35 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 36 Testing :- Compressive test of C.C.Cube 37 Provide and supplying Executive Chairs A generously cushioned, molded PU seat combined with breathable mesh fabric, Crafted from strong and durable Polyamide (Nylon) featuring a reinforced mesh back, chair equipped with BIFMA Certified Class-4 Hydraulic Gas Spring and BIFMA Certified 60mm Wheel Castors. Chair having 3 years warranty (Executive chairs) / or equivalent / as Directed by Engineer Incharge. Key Features Colour : GREY / Black Material : Metal Dimensions : 64D x 61W x 119H Centimeters Size : Standard Back Style : Mesh Back Special Feature : Adjustable Lumbar, Adjustable Height, Adjustable Arm Rest, Adjustable Head Support Seat Material Type : Breathable Microfiber Cloth Covered in PU Foam 38 Providing and supplying visitor chair having size Depth- 62cm, width-55cm, height- 80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyster Powder Coated. The chair shall be Ergonimc Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in 39 Public Seating Chair. - 2 Seater Providing and Fixing 2 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish with 1 year warranty etc complete as directed by engineer in charge.. 40 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 41 Seating tool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. 42 Providing and supplying examination couch. This examination couch features an adjustable backrest that can be easily operated using a gas spring system. The twosection foam-padded top provides added comfort for patients during examinations. It is equipped with three drawers and three cabinets, offering ample storage space for medical equipment and supplies, keeping everything organized and easily accessible. A tray for the B.P. apparatus is conveniently placed near the headrest, ensuring easy access for medical professionals. The couch is finished with pre-treated epoxy powder coating, making it durable and easy to clean, while also ensuring resistance to corrosion Designed with a carrying capacity of 150-180 kg. etc complete. as directed by engineer in charge. Key Features Adjustable Backrest: The backrest is adjustable using a gas spring system, providing flexibility for various examination positions. Foam Padded, Upholstered Top: Offers comfort and support during patient examinations. Ample Storage: Equipped with three drawers and three cabinets to store medical supplies and equipment. BP Tray: A tray near the headrest for easy access to BP apparatus. 43 Providing, supplying and installing the cabinet, dimensions of 1200mm (W) x 1660mm (H) x 450mm (D) and is constructed from prime quality 0.8mm thick CRCA steel for the body panels and shelves. The shelves are adjustable in height and have a uniformly distributed load capacity of 50kg per shelf. The vertical sides feature continuous slots for mounting shelves at variable heights. The entire carcass is finished with a 50 ±10 microns epoxy polyester powder coating. The facia of the cabinet consists of metal shutters with metal borders, incorporating toughened glass panels. The handles are Dshaped in an aesthetically pleasing design with a stainless steel (SS) finish. The locking mechanism uses a metal cam lock for security. Additionally, the cabinet is equipped with adjustable levelers featuring plastic bases, allowing height adjustments of up to 15mm.This furniture is built according to the specifications and samples approved by the client. It meets the required certifications including ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, BIS standards, and is a BIFMA Gold certified member. The product comes with a 5-year warranty. Installation and other details are as directed by the engineer in charge. 44 Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. The above furniture should be as per specification with 3 years warranty etc. sample approved by client. TABLE SIZE :- W1060mm x D600mm x H750 mm -1 No W900mm x D300mm x H750 mm – 1 No W600mm x D450mm x H750 mm – 2 No As Directed by Engineer Incharge 45 Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MS of 1.5mm thickness in powder coated finish of 50 microns thickness. The above furniture should be as per specification with 3 years warranty etc. sample approved by client. TABLE SIZE :- W1200xD700xH740mm As Directed by Engineer Incharge 46 Providing and supplying adjustable MS storage rack having size 1200 mm to 1800mm x 300 mm x 1600 mm including all transportation upto site etc complete as directed by engineer in charge. Key features 1. Material  Frame : Mild steel (MS) powder coated  Shelves: Cold-rolled steel (CRCA) or galvanized  iron (GI) 2. Angle Specifications  Size 40 x 40 x 2.50 mm  Length : Standard lengths of 6 feet, 8 feet, or 10 47 Providing and supplying trash bins with a maximum height of 450mm 35 - 40 liter, made of high-quality molded plastic for durability and ease of maintenance. The bins shall be equipped with a functional lid mechanism and shall be provided as per the approved selection and design. The work shall be carried out as directed by the Engineer-In-Charge etc complete . 48 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. 49 Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed. Providing second class Burnt Brick masonry with conventional/I.S .type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meter made out of 4 mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity microprismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorized distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% aluminum 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) Providing Excavator (JCB JS 80 or equivalent) of 0.9 Cum etc complete Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec. One Number: As directed by Engineer- in-charge. Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Providing and laying Cast in situ/Ready Mix cement concrete M-15 trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete. Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. : Means Bd.A.1 Page No.259 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. Transportation of excavated material including loading and unloading etc. complete. ( (c) lead up to 5 km) Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer in charge. Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineerin- charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use).Spec. No As director by engineer in charge. Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Spec. No As director by engineer incharge. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. etc
Contract Date: May 21, 2026 Contract Value : 4.09 Crore
Local Bodies No of Bidders 2
Maharashtra View Result →
11.
Home Affairs #10977452 AOC
Supply Of Stationaryand Forms ( Part-I ) , Miscellaneous Articles ( Part-Ii ) For Sap 4Th Battalion, Kasba, Raiganj, Uttar Dinajpur 2023-24. Sl. No. Item Description 1 Office Stationary Articles ( Part-I ) 2 Pen ( Red ) 3 Pen ( Blue ) 4 Pen ( Black ) 5 Pen ( Green ) 6 Refill ( Red ) 7 Refill ( Blue ) 8 Refill ( Black ) 9 Refill ( Green ) 10 Ball Pen ( Red ) 11 Ball Pen ( Blue ) 12 Ball Pen ( Black ) 13 Blank C.D. & D.V.D. Plastic Cover 14 Bodkin With Eye As Per Sample 15 Bound Register Un-Ruled 150 Sheet As Per Sample 16 Bound Register Un-Ruled 300 Sheet As Per Sample 17 Bound Register Un-Ruled 400 Sheet As Per Sample 18 Bound Register No. 08 Un-Ruled 120 Sheet Conquest Pages 19 Bound Register No. 08 Ruled 120 Sheet Conquest Pages 20 Bound Register No. 10 Un- Ruled 150 Sheet Conquest Pages 21 Bound Register No. 10 Ruled 150 Sheet Conquest Pages 22 Bound Register No. 04 Un-Ruled Conquest Pages 23 Bound Register No. 04 Ruled Conquest Pages 24 Bound Register No. 12 Un- Ruled 200 Sheet Conquest Pages 25 Calculator ( 12 Digit ) Big Size 112 Steps, Check & Correct Best Quality 26 Collin Big Size 27 Compute Paper 80 Column ( With Carbon ) As Per Sample 28 Compute Paper 80 Column ( Without Carbon ) As Per Sample 29 Correction Pen 30 Chalk Pencil 31 Channel File 32 Clip Board File ( Plastic ) 33 Borosil With Lid 34 Duplicating Paper ( Size- 21 X 33 Cm ) 500 Sheet 35 Duster Cloth ( Size- 54 X 30 Cm ) 36 Duster Cloth ( Big Size ) 37 Duster Cloth ( Regular ) 38 Duster Wood ( Best Quality ) 39 Eraser 40 Folio Bag For Office Use ( Best Quality ) 41 Fax Roll 42 Gum 300 Ml. Bottle 43 Gum 700 Ml. Bottle 44 Gum Tube 50 Ml 45 Gum Tube 20 Ml 46 12 Laser Jet Printer Toner Cartridge 1020 47 High Light Pen 48 James Clip 49 Key Bag Medium Best Quality 50 Knife Big Size 51 Marker Pen With Cdm 52 Marker Pen Permanent 53 Cd Blank ( R ) 54 Dvd Blank ( R ) 55 Dvd Blank ( R / W ) 56 Note Pad ( Itc ) 57 Paper Weight Squire Type Best Quality 58 Pendrive ( 16 Gb ) 59 Pendrive ( 32 Gb ) 60 Pendrive ( 08 Gb ) 61 Pen Stand Best Quality Medium 62 Pen Stand Best Quality Big 63 Pencil Carbon ( Dfc Size ) 64 Pencil Carbon ( Sf Size ) 65 Pilot Pen V5 / V7 ( Red ) 66 Pilot Pen V5 / V7 ( Blue ) 67 Pilot Pen V5 / V7 ( Black ) 68 Pilot Pen V5 / V7 ( Green ) 69 Pin Cushion ( Metalic ) Best Quality 70 Pin Easy Push Bright Electro Nickel Plated 71 Plastic Water Jug Best Quality 72 Paper Memo Holder 73 Punching Machine 74 Pointed Ball Pen ( Red & Blue ) 75 Refill Gel Pen ( Red ) 76 Refill Gel Pen ( Blue ) 77 Refill Gel Pen ( Black ) 78 Refill Gel Pen ( Green ) 79 Round Sealing Wax ( Red ) Best Quality 80 Safety Match Box 81 Scale Wooden06 Inch 82 Scale Wooden12 Inc 83 Scissors For Paper Cutting Best Quality Big Size 84 Sharpner 85 Sinature Pad ( 25 Pages With Board Binding ) 86 Sponge With Plastic Case Best Quality 87 Stamp Pad 88 Stamp Pad Ink ( 60Ml ) 89 Stand Candle ( Medium ) 90 Stapler Machine ( Big 24 / 6 Size ) 91 Stapler Machine ( Small 10 Size ) 92 Stapler Pin ( Big 24 / 6 Size ) 93 Stapler Pin ( Small 10 Size ) 94 Steel Mnual Call Bell 95 Self Adhesive Tape 2 Inch Wide 96 Sketch Pen 97 Table Calling Bell Best Quality 98 Tag Cotton As Per Sample 99 Thread Bal ( Red ) 100 Thread Bal ( White ) 101 Towel Big Size 102 Tvs Cartridges Hd755 Ribbon 103 Tvs Cartridgesprodot Ribbon 104 Tvs Cartridges Hd745 Ribbon 105 Tvs 345 Msp Star Ribbon Pronter Cartridges ( For 136 Collumn 9 / 24 Pin Dot Matrix Printers ) 106 Use And Throw Ball Pen ( Blue ) 107 Use And Throw Ball Pen ( Black ) 108 Use And Throw Ball Pen ( Red ) 109 Use And Throw Pen ( Blue ) 110 Use And Throw Pen ( Black ) 111 Use And Throw Pen ( Red ) 112 Waste Paper Busket ( Plastic ) Best Quality 113 White Paper Dfc Size Andhrapradesh -43X69 Cms. 8.6 Kg 114 White Paper Fc Size 115 White Board Marker Pen 116 Wooden Pencil ( Hard-2B ) 117 Wooden Pencil ( Medium Hb ) 118 Xerox Paper A4 Size Normal Quality 119 Xerox Paper Legal Size Normal Quality 120 Colour Flap 121 Feviquick Gum 122 Fevi Stick Gum 123 Steel Scale 12 Inch 124 Plastic Scale 12 Inch 125 Stapler Machine Hp 45 Big Size 126 Photo Paper 127 Paper Binder Clip Clamp 128 Camlin White Glue 50 Gm 129 Bound Register Ruled 600 Sheets Conquest Pages 130 Bound Register Un-Ruled 600 Sheets Conquest Pages 131 Luxor V-5 Pen 132 Forms ( Part-I ) 133 Bill Register Per Register Containing 200 Sheets With Board Binding Both Side Printing 134 Bill Register And Page Numbering 135 Cl Register Containing 100 Sheets Per Book With Page Numbering Covering With Cloth Binding As Per Sample Copy 136 Challan Form Per 1000 No. Pad Binding 506 Single Side Printing 137 Contingent Charges Register Per Register Containing 200 Sheets With Cloath Binding Both Side Printing 138 Contingent Charges Register And Page Numbering 139 Attendence Register Per Register Containing 56 Sheets With Cloath Binding Both Side Printing 140 Attendence Register And Page Numbering 141 Bill Ext. Form Per 1000 Numbers Pad Binding 500 Sheets ( Single Side Printing ) 142 Opd Ticket For Hospital Per 1000 Numbers Pad Binding 500 Sheets ( Single Side Printing ) 143 Form Of Leave Account Per 1000 Numbers Pad Binding 500 Sheets ( Singly Side Printing ) 144 Leave Application Per 1000 Numbers Pad Binding 500 Sheets ( Singly Side Printing ) 145 Peon Book Per 1000 Numbers Pad Binding 500 Sheets ( Both Side Printing And Page Numbering ) 146 Master Roll Per Register Containing 200 Sheets With Cloth Binding Both Side Printing 147 Master Roll And Page Numbering 148 Master Roll Per Register Containing 100 Sheets With Cloth Binding Both Side Printing 149 Master Roll And Page Numbering 150 Master Roll Per Register Containing 150 Sheets With Cloth Binding Both Side Printing 151 Master Roll And Page Numbering 152 Cheque Register Per Register Containing 50 Pages With Boarding As Per Sample ( Both Side Printing ) 153 Form Of Nomination For Death Gratuity Per 1000 Number As Per Sample Copy Including Pad Binding 500 Sheets ( Singly Side Printing ) 154 Committee Register Per Register Containing 200 Sheets With Board Binding ( Both Side Printing ) 155 Admission Of Gpf Form Per 1000 Number As Per Sample Copy Including Pad Binding 500 Sheets ( Single Side Printing ) 156 Service Roll Containing 36 Pages Per Book With Cloth Binding As Per Sample With Page Numbering 157 Form Of Duty Register Containing 500 Pages Per Register With Cloth Binding As Per Sample With Page Numbering 158 Cc Book Containing 100 Pages Per Book In Dublicate Covering With Cloth Binding And Page Numbering 159 Distribution Of Arms Form Per 1000 Numbering With Pad Binding 500 Sheets ( Single Side Printing ) 160 General Diary Book Per 1000 Numbering With Pad Binding 500 Sheets ( Single Side Printing ) 161 El Register Containing 200 Pages Per Book Cobvering With Cloth Binding As Per Sample. 162 Ext. Acquaintance Roll ( Wbf No. 5214 ) Per 100 Numbers With Pad Binding 500 Copies Single Side Printing 163 Cover File Double Plastic Coated 164 Folder File Double Plastic Coated 165 File Flap Double Plastic Coated 166 Order Book Containing 100 Pages Per Book Covering With Board Binding Page Numbering And Single Side Printing 167 Form Of Salary Statement Of Income Tax Per 1000 Numbers As Per Sample Copy Including Pad Binding 500 Copies ( Both Side Printing ) 168 Form Of Salary Statement Of The Employees Per 1000 Numbers As Per Sample Copy Including Pad Binding 500 Copies ( Both Side Printing ) 169 Form Of Submission Income Tax Statement ( Form-16 ) Per 1000 Numbers As Per Sample Copy Including Pad Binding 500 Copies ( Both Side Printing ) 170 Stock Book Of Departmental Containing 1000 Pages Per Register With Cloth Binding As Per Sample. 171 Tr Form No.-50 Per 1000 Numbers With Pad Binding 500 Copies ( Single Side Printing ) 172 Tender Bookcontaining 300 Pages Per Register With Board Binding ( Both Side Printing ) 173 Drivers Car Diary Containing 50 Pages Per Diary. 174 Tr Form No.-21 Per 1000 Numbers As Per Sample Including Pad Binding 500 Sheets ( Both Side Printing ) 175 Morning Report ( Dg & Igp Cr. Wb ) =W= Dig ( Ap ) Bkpore =W= Dg & Igp ( Ap ) Wb Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 176 Morning Report Dig ( Ap ) Nb Slg =W= Dg & Igp ( Ap ) Wb =W= Igp ( Ap ) Nb Slg Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 177 Morning Report Igp ( Ap ) Nb Slg =W= Dig ( Ap ) Nb Slg =W= Dg & Igp ( Ap ) Wb Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 178 Morning Report Of Sap 4Th Bn., Kasba, Raiganj, Uttar Dinajpur Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 179 Ammunition Formper 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 180 Issue Voucher Form Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 181 Casualty Form Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 182 Receipt For Payment W.B.P.M.I.P. Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 183 B Declaration For Pa Claim Form Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 184 Declaration Of Family Particulars Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. 185 Firing Registers 100 Pages Board Binding 186 Allotment Register 150 Pages Board Binding 187 Order Book 400 Pages Board Binding 188 Order Book 200 Pages Board Binding 189 Orderly Room Register 100 Pages Board Binding 190 Pd Book 100 Pages ( Single Side Printing With Duplicate ) 191 Inspection Report Book ( Wbf No. 5308 Big Size ) 107 Pages Board Binding 192 Inspection Report Book ( Wbf No. 5308 Legal Size ) 100 Pages Board Binding 193 Gpf Register 700 Pages 194 Cash Book 300 Pages 195 Rubber Stamp 196 El Register 300 Pages 197 El Register 100 Pages 198 Letter Pad 70 Pages 199 Leaflet ( Both Side ) 100 Pcs 200 Bill Transit Register 100 Pages 201 Clothing Hand Book Wbp Form No. 5341 ( 25 Pages ) 202 Receipt For Payment Of Electric Current Charges 100 Pages 203 Service Bookcontaining 43 Pages Per Book With Cloth Binding As Per Sample With Page Numbering 204 Form Of Tender 500 Pages 205 Weekly Pending List ( Form No. 203 ) 100 Pages 206 Stock Book Of Forms 300 Pages Per Register With Cloth Binding 207 Stock Book Of Stationary Articles 200 Pages Per Register With Cloth Binding 208 Received Register Per Register Containing 400 Sheets With Board Binding ( Both Side Printing ) 209 Despatch Rigister Per Register Containing 400 Sheets With Board Binding ( Both Side Printing ) 210 Register Of Contingent Charges Wb Form No. 2401 ( 324 Pages ) 211 Register Of Contract Contingent Charges Wb Form No. 2402 ( 100 Pages ) 212 Clothing Stock Book 200 Pages 213 Duty Register Per Register Containing 100 Sheets With Binding Both Side Printing And Page Numbering 214 Envelope ( 9.5 X 4.5 ) Plain Small 100 Pc Per Bundle 215 Envelope Ordinary ( 6 X 12 ) Plain 100 Pc Per Bundle 216 Envelope ( 16 X 12 ) 100 Pc Per Bundle 217 Envelope Big Size ( Cloth ) 100 Pc Per Bundle 218 Envelope A4 Size 100 Pc Per Bundle 219 Gpf Register 600 Pages ( Binding With Cloth Cover ) 220 Gpf Register 400 Pages ( Binding With Cloth Cover ) 221 Register Of Proceeding 100 Pages Per Book 222 Register Of Casualities 100 Pages Per Book 223 Training Data Form 500 Pages ( 01 Rim ) 224 Cl Register Containing 200 Sheets Per Book With Page Numbering Covering With Cloth Binding As Per Sample Copy 225 Ta Bill Register ( Formate ) 300 Pages 226 Trodat Stamp 227 Note Sheet 100 Pages With Sl No. 228 Pocket Diary 229 Ta Bill Register ( Formate ) 200 Pages 230 Do Letter Pad 70 Pages 231 100 Point Register With Binding ( 300 Pages ) 232 Held Over Register With Binding ( 200 Pages ) 233 Brown Target Paper 234 White Binding Paper 235 Office Diary 236 Book Binding ( Hard Cover Binding ) 100 Pages 237 Book Binding 100 Pages 238 Book Binding ( Cloth Binding ) 100 Pages 239 Book Binding ( Normal Binding ) 100 Pages 240 Book Binding ( Spiral Binding ) 100 Pages 241 Year Diary ( Times ) 242 Executive Diary 243 Wall Calender Printing 244 Miscellaneous Articles ( Part-Ii ) 245 Ro+Uv + Uf ( 07 Ltr. Store + 15Ltr. / Hr Purify ) 246 Ro+Uv + Uf +Tds ( 10 Ltr. Store + 15Ltr. / Hr Purify ) 247 Water Purifier Machine 248 Repair Of Water Purifier Machine 249 Ro Membren 250 Sediment 251 Carbon 252 Frt 253 Booster Pump 254 Sounoid Valve 255 Tds Controller 256 Sensor Float Valve 257 Ccb 258 Uv Lamp 259 Uv Housing 260 Main Wire 261 Smps 262 Iron Removal 263 Uf Membren 264 Post Carbon 265 Carbon Of Water Purifier Machine 266 Bandage 2½ 267 Battery 750 268 Battery 750 269 Battery 750 270 Battery Charger 12 V 2 Amp 271 Battery Charger 12 V 4 Amp 272 Battery Charger 12 V 8 Amp 273 Battery Dry Cell 12Volt. Rechargeable 274 Battery Dry Cell 12Volt. Rechargeable 275 Battery Dry Cell 6 Volt. Rechargeable 276 Battery Dry Cell 6 Volt. Rechargeable 277 Battery ( Medium ) 278 Battery ( Medium ) 279 Battery ( Medium ) 280 Battery ( Pencil ) 281 Battery ( Pencil ) 282 Battery ( Pencil ) 283 Bed Switch 6 Amp. 284 Bell Push Switch ( Box Type ) 285 Black Patching Paper 286 Black Tape ( Pvc ) 287 Water Cooler Ss 20 / 20 With Kent Filter ( Ro + Uf + Tds Controller ) & Repair 288 Repair Of Water Cooler Ss 20 / 40 289 Water Cooler Ss 40 / 80 ( Ro + Uf + Tds Controller ) & Repair 290 Water Cooler Ss 40 / 80 ( Ro + Uf + Tds Controller ) Repair 291 Briefcase 292 Briefcase 293 Candle ( Big Size ) 6 Pcs. Pkd. 294 Carbon Filter 295 Casserole 1 Ltrs. 296 Casserole 2.5 Ltrs. 297 Casserole 4 Ltrs. 298 Casserole 5 Ltrs. 299 Casserole 10 Ltrs. 300 Ceiling Fan 48 301 Ceiling Fan 48 302 Ceiling Fan 48 303 Ceiling Fan 52 304 Ceiling Fan 52 305 Ceiling Fan 52 306 Ceiling Fan Regulator 307 Ceiling Fan Regulator 308 Ceiling Fan Regulator 309 Ceiling Fan Repairing And Coil Binding 310 Condenser Forceiling Fan 311 Pedestal Fan 312 Pedestal Fan 313 Pedestal Fan Repairing And Coil Binding 314 Electronics Regulator For Fan 315 Portable Rough Pad Rewrteable 316 Paper And Card Shredder 317 File Desk Tray 318 Cello Tape 319 Paper Holding Binder Clip 320 Plastic Storage Clip Board 321 Cheque Book Holder 322 Sticky Note Pad Large 323 Sticky Note Pad Small 324 Led Rice Lamp 325 Rice Lamp 326 Cup Platemedium Quality ( 6 Pcs Set ) 327 Cup Plate ( Bone China ) Good Quality ( 6 Pcs Set ) 328 Detergent Cake 100 Gm 329 Detergent Cake 250 Gm 330 Dinner Plate ( Bone China ) 6 Pcs. Set 331 Dinner Set ( Bone China ) Good Quality 332 Electric Kettle 1 Ltrs. 333 Electric Kettle 1 Ltrs. 334 Electric Kettle 2 Ltrs. 335 Electric Kettle 2 Ltrs. 336 Electric Kettle 4 Ltrs. 337 Electric Kettle 4 Ltrs. 338 Emergency Light 6 Volt 339 Emergency Light 6 Volt 340 Extension Cord ( Skill ) 07 Mtrs. 341 Extension Cord For Computer ( 7 Point ) 342 ( Ddl ) Tube / Container Small 343 Fevicol ( Ddl ) Tube / Container Medium 344 Flask 1 Ltrs. 345 Flask 1 Ltrs. 346 Flask 2 Ltrs. 347 Flask 2 Ltrs. 348 Lock ( ( Navtal ) , 4 Lvs 349 Lock ( ( Navtal ) 6 Lvs 350 Lock ( ( Navtal ) , 7 Lvs 351 Lock ( ( Navtal ) , 8 Lvs 352 Graphic Board 353 Graphic Board Figure½ 354 Graphic Board Figure 1 355 Graphic Board Letter ½ 356 Graphic Board Letter 1 357 Led Bulb 15 Watt 358 Led Bulb 15 Watt 359 Led Bulb 20 Watt 360 Led Bulb 20 Watt 361 Led Bulb 9 Watt 362 Led Bulb 9 Watt 363 Led Bulb 30 Watt 364 Led Bulb 30 Watt 365 Led Bulb 40 Watt 366 Led Bulb 40 Watt 367 Led Halogen 100 Watt 368 Led Halogen 100 Watt 369 Led Halogen 50 Watt 370 Led Halogen 50 Watt 371 Led Halogen 70 Watt 372 Led Halogen 70 Watt 373 Led Tube Set 2 374 Led Tube Set 2 375 Led Tube Set 4 376 Led Tube Set 4 377 Measuring Tape ( Steel ) 25 Mtrs. 378 Measuring Tape ( Steel ) 75Mtrs. 379 Measuring Tape ( Steel ) 100 Mtrs. 380 Measuring Tape6 381 Measuring Tape 20 382 Measuring Tape 50 383 Measuring Tape 100 384 Metal Bulb 250 Watt 385 Metal Bulb 500 Watt 386 Metal Choke 250 Watt 387 Metal Choke 500 Watt 388 Metal Lamp Complete Set 250 Watt 389 Metal Lamp Complete Set 500 Watt 390 Microphone 391 Microphone Cordless 392 Microphone Transistor ( Ahuja ) 80 Watt 393 Microphone Transistor 100 Watt 394 Microphone Transistor 120 Watt 395 Mike Set Unit And Horn 396 Sound Box50 Watt 397 Sound Box 80 Watt 398 Sound Box 100 Watt 399 Sound Box 120 Watt 400 Microphone Stand 401 Microphone Stand 402 Mixer Grinder 403 Mixer Grinder 404 Ors 15 Mg Pouch 405 Ors 20 Mg Pouch 406 Ors 25 Mg Pouch 407 Ors 50 Mg Pouch 408 Ors- L ( Pouch ) 409 Phenyl 410 Phenyl 411 Phenyl 412 Pvc Tape ( Big Roll ) 413 Revibe ( Big Size ) 414 Room Freshener 375 Ml. 415 Room Freshener 375 Ml. 416 Sanitizer 417 Steiner 200 Ml. Bot. 418 Starter For Ac 18-25 Amp 419 Starter For Ac 25 Amp ( 2 Ton ) 420 Starter For Ac 25 Amp 2 Ton 421 Ac Machine Copper Pipe 422 Stop Watch ( Digital ) 423 Dslr Camera 424 Dslr Camera 425 Thermo Flask 1 Ltrs 426 Thermo Flask 1 Ltrs 427 Thermo Flask 2 Ltrs 428 Thermo Flask 2 Ltrs 429 Tiffin Carrier Four Container ( Steel ) 430 Wall Clock 431 Wall Clock 432 Weight Machine ( For Articles ) 5 Kg Capacity With Units 433 Weight Machine Digital 434 Zeoline 50 Ml Bot. 435 Zeoline 100 Ml Bot. 436 Zeoline 200 Ml Bot. 437 Name Plate Brass Made 438 Name Plate Board Plastic 439 Name Plate Board Wooden 440 Name Plate ( Embroidery ) 441 Succession Board Fiber 442 Succession Board Wood 443 Succession Board Printing 444 Angle Drill 445 Arms Rack 10 Pcs. Rifle 446 Arms Rack10 Pcs. Rifle 447 Arms Rack 10 Pcs. Rifle 448 Arms Rack 10 Pcs. Rifle 449 Arms Rack 16 Pcs. Rifle 450 Arms Rack 16 Pcs. Rifle 451 Arms Rack 16 Pcs. Rifle 452 Arms Rack 16 Pcs. Rifle 453 Arms Rack 20 Pcs. Rifle 454 Arms Rack 20 Pcs. Rifle 455 Arms Rack 20 Pcs. Rifle 456 Arms Rack 20 Pcs. Rifle 457 Pencil 458 Pencil 459 Pencil 460 Art Paper 461 Flex / Banner 462 Basket Plastic 463 Bed Cover ( Double ) 464 Bed Cover ( Double ) 465 Bed Cover ( Single ) 466 Bed Cover ( Single ) 467 Bed Sheet ( Double ) 468 Bed Sheet ( Double ) 469 Bed Sheet ( Single ) 470 Bed Sheet ( Single ) 471 Black Board Small 472 Black Board Medium 473 Black Board Big 474 Black Board Stand ( Iron ) 475 White Board Small 476 White Board Medium 477 White Board Big 478 Black Board Stand ( Wooden ) 479 Black Board Stand ( Wooden ) 480 Black Fluorescent Tape 1 481 Black Target Paper 482 Blinker ( Solar ) 483 Blinking Light / Bleker 484 Bone Dust 485 Bowl Set ( Bone China ) 486 By-Cycle All Accessories For Gents 487 By-Cycle All Accessories For Ladies 488 By-Cycle Rim 489 By-Cycle Tube ( Nylon ) 490 By-Cycle Tyre ( Nylon ) 491 By-Cycle Pumper 492 Coffee Cup Small 493 Coffee Cup Medium 494 Coffee Glass 495 Coffee Mug 496 Cotton 100 Gm Pkd. 497 Cotton Mattress 498 Cotton Mattress 499 Dustbin ( Use Me ) 14G.I. Sheet 500 Dustbin ( Use Me ) 18 G.I. Sheet 501 Dustbin Plastic ( Leg Press ) Big 502 Dustbin Plastic ( Leg Press ) Medium 503 Dustbin Plastic ( Leg Press ) Small 504 Duster Cloth 505 Emery Paper 506 Fiber Glass 4 Mm Standard 507 Fiber Plate Small 508 Fiber Plate Small 509 Fiber Plate Medium 510 Fiber Plate Large 511 Fiber Sheet 512 Fiber Tray 513 Fire Bucket 12 514 Fire Bucket 18 515 Fire Extinguisher Refilling ( 2 Kg. ) 516 Fire Extinguisher Refilling ( 5 Kg. ) 517 Fire Extinguisher Refilling ( 9 Kg. ) 518 First Aid Box ( Medium Size ) With All Necessary Equipment And Medicine 519 Flower Vase 22 Brass 520 Folding Chair ( Steel ) 521 Folding Cot ( Nylon Fita ) 522 Folding Table ( Moulded ) 523 Gala ( Seal Wax ) 524 Glass 3 Cell Torch 525 Glass Bowl 526 Glass Lid 527 Glow Sign Board Complete Fitting 528 Glow Sign Board Complete Fitting 529 Hand Sanitiser Dispensing Machine With Temperature Detection 530 Hand Towel ( Standard Size ) 531 Height Measuring Stand ( Metal ) 532 Hurricane Lantern ( Local Made ) 533 Hurricane Lantern ( Kissan ) 534 Infrared Digital Thermometer 535 Iron Door Frame 536 Iron Door Frame With Palla 537 Iron Grill 538 Iron Made Arms Rack 539 Jurricane ( Pvc ) 5 Ltrs. 540 Letter Punch ( A To Z ) Brass & Steel 541 Liquid Measuring Equipment 542 Magnifying Glass 543 Markin Cloth 544 Mask ( N-95 ) 545 Mask ( Cloth ) 546 Mask ( Surgical ) 547 Mirror Small 548 Mirror Medium 549 Mirror Long 550 Moulded Centre Table 551 Moulded Chair With Cushion 552 Moulded Chair With Handle 553 Moulded Chair Without Handle 554 National Flag 555 Pad Lock 5 Lvr. 556 Pad Lock 6 Lvr. 557 Pad Lock 7 Lvr. 558 Pad Lock 8 Lvr. 559 Paper Weight ( Marble ) 560 Paper Weight ( Plastic ) 561 Ply Board ( Commercial ) 562 Ply Board ( Kit ) 563 Wooden Furniture 564 Wooden Furniture 565 Wooden Furniture 566 Scissors For First Aid Box Small 567 Scissors For First Aid Box Medium 568 Scissors For First Aid Box Large 569 Scissors ( Tailors ) 570 Sealing Punch Machine 571 Side Pillow 572 Side Pillow Cover 573 Head Pillow 574 Head Pillow With Cover 575 Steel Scale 12 576 Spoon Set ( V.I.P.Steel ) 577 Spoon Set Plastic Handle 578 Steel Spoon ( Big ) Vip 579 Steel Fork Good Quality Small 580 Steel Fork Good Quality Big 581 Steel Spoon ( Medium ) Vip 582 Steel Spoon ( Small ) Vip 583 Steel Tray 584 Sutli 585 Tea + Biscuit 586 Tea Container 05 Ltrs. 587 Tea Container 10 Ltrs. 588 Tea Container 15 Ltrs. 589 Tea Set ( Bone China ) Good Quality 590 Tiles ( Grade - 1 ) 591 Tissu Paper 592 Tissu Paper For Toilet 593 Towelgood Quality Standard Size 594 Towelgood Quality 24 595 Towelgood Quality 72 596 Transparent Table Cloth ( Standard Size ) 597 Umbrella Big Size 598 Wall Mounted Digital Thermometer 599 Water Glass 06 Pcs. Set 600 Water Glass 06 Pcs. Set 601 Water Bottle ( 1 Ltr. ) 602 Water Bottle ( 500 Ml. ) 603 Water Bottle ( 250 Ml. ) 604 White Table Cloth ( Cotton ) 605 Furniture 606 Furniture 607 Furniture 608 Wrist Band 609 Water Drum ( 20 Ltrs ) 610 Water Drum ( 20 Ltrs ) 611 Tarpaulin Covering 612 Hessian Covering 613 Temporary Marker Pen For White Board 614 Duster For White Board 615 Barbed Wire Bamboo Fencing Apart Vertically In Four Rows And Fixed With Strong Bamboo Posts 616 Single Slope Kitchen Pandel Bamboo Frame Works Shed With Tarpaulin And Others Fitting Same Four Side Covering 617 White Board Big 618 White Board Mediam 619 White Board Small 620 Hiring Charges Of Ceilling Fan With Fitting 621 Hiring Charges Of Pedestal Fan With Fitting 622 Hiring Charges Of Jhar Fan With Fitting ( 28 ) Dia. 623 Hiring Charges Of Tulu Pumpwith Fittings. 624 Hiring Charges Of Tube Light 625 Hiring Charges Of Metal Light 626 Tv Hairing 627 Hairing Chair 628 Hiring Executive Chair 629 Hiring Table 630 Hiring Cooler Machine 631 Hiring Heater 632 Cost Of Window And Door Covering With Polythene With All Accessories. 633 Boil Egg ( 01 Pc. ) 634 Cake ( 01 Pc. ) 635 Banana ( 02 Pcs. ) 636 Sweets- ( 01 Pc. ) 637 Snacks 638 Vip Chair Hiring 639 Vip Table Hiring 640 A.C Machine Servicing And Gas Filling 641 Iron Cot Repairing Including Painting 642 Ply Green Panelling In Wall 643 Ply Normal Panelling In Wall 644 Falls Ceiling With Fitting And Painting 645 Floor Fitted With Vitrified Tiles And Skirting 646 Gala Stamp 647 Temporary Furniture WorkS 648 Wooden Door With Brass Lock And Handle 649 Aluminium Frame Fitted With Glass Door ( 5 X 2 ) 650 Aluminium Frame Fitted With Glass Window ( 4 X 3 ) For Each Window 651 Wooden Book Self ( 6 X 3 ) 652 Glass For Centre Table 653 Wardrobes 654 To Make New Ceiling By Ply Board Without Frame Works With Labour Charges 655 Wooden Door Repair 656 Floor Mat 657 Sanitizer 658 Oxygen Cylinder 14 Ltrs 659 Xerox Machine-Repair 660 Xerox Machine-Repair 661 Xerox Machine 662 Xerox Machine Ir 2004 Repairing ( Image Runner ) 663 Paper / File Maintenance Software With 2 Years Maintenance 664 Typing Software With 2 Years Mainantence 665 Projector With Screen ( Hd ) 666 Projector With Screen ( Hd ) 667 Projector Machine With Screen 668 Projector Machine Repairing 669 Adsl Wireless Router With Modem 670 Adsl Wireless Router With Modem 671 Adsl Wireless Router With Modem 672 Dvd Writer 673 Smps 674 Smps 675 Smps 676 Smps 677 Smps 678 Smps 679 Smps 680 Smps 681 Smps 682 Smps 683 Switch Port 16 684 Switch Port 24 685 Internet Cable Wire 686 Router Power Adapter 687 External Usb Port 688 Printer Cable 689 Printer Cable 690 Printer Cable 691 Printer Cable 692 Printer Cable 693 Scanner 694 Scanner 695 Scanner Repairing 696 Scanner Repairing 697 Scanner Repairing 698 Scanner Repairing 699 Scanner Repairing 700 Scanner Repairing 701 Scanner Repairing 702 Colour Printer 703 Colour Printer 704 Fax Machine Repair 705 Photography Paper 706 Pen Drive 32 Gb 707 Pen Drive 64Gb 708 Pen Drive 128 Gb 709 Blank Plastic Cd Cover 710 Dox-Cable Cat-6 711 External Hard Disk 1 Tb 712 External Hard Disk 2 Tb 713 External Hard Disk 500 Gb ( Hp ) 714 Blank Cd 715 Blank Cd 716 Dvd 717 Dvd 718 Mouse Pad 719 Cabinet With S.M.P.S- 450 Watt 720 Cabinet With S.M.P.S- 450 Watt 721 Cabinet With S.M.P.S- 450 Watt 722 Mother Board H110m-S2 723 Mother Board H110m-S2 724 Processor- I3 725 Processor- I3 726 Processor- I5 727 Processor- I5 728 Processor- I7 729 Processor- I7 730 Ram - 4 Gb Ddr-Iii 731 Ram - 4 Gb Ddr-Iii 732 Ram - 4 Gb Ddr-Iii 733 Ram - 4 Gb Ddr-Iii 734 Ram - 4 Gb Ddr-Iii 735 Ram - 4 Gb Ddr-Iii 736 Ram - 4 Gb Ddr-Iii 737 Ram - 4 Gb Ddr-Iii 738 Ram - 8 Gb Ddr-Iii 739 Ram - 8 Gb Ddr-Iii 740 Ram - 8 Gb Ddr-Iii 741 Ram - 8 Gb Ddr-Iii 742 Ram - 8 Gb Ddr-Iii 743 Ram - 8 Gb Ddr-Iii 744 Ram - 8 Gb Ddr-Iii 745 Ram - 8 Gb Ddr-Iii 746 Ram - 4 Gb Ddr-Iv 747 Ram - 4 Gb Ddr-Iv 748 Ram - 4 Gb Ddr-Iv 749 Ram - 4 Gb Ddr-Iv 750 Ram - 4 Gb Ddr-Iv 751 Ram - 4 Gb Ddr-Iv 752 Ram - 4 Gb Ddr-Iv 753 Ram - 4 Gb Ddr-Iv 754 Ram - 4 Gb Ddr-Iv 755 Ram - 4 Gb Ddr-Iv 756 Ram - 4 Gb Ddr-Iv 757 Ram - 4 Gb Ddr-Iv 758 Ram - 4 Gb Ddr-Iv 759 Ram - 4 Gb Ddr-Iv 760 Ram - 4 Gb Ddr-Iv 761 Ram - 4 Gb Ddr-Iv 762 Ram - 8 Gb Ddr-Iv 763 Ram - 8 Gb Ddr-Iv 764 Ram - 8 Gb Ddr-Iv 765 Ram - 8 Gb Ddr-Iv 766 Ram - 8 Gb Ddr-Iv 767 Ram - 8 Gb Ddr-Iv 768 Ram - 8 Gb Ddr-Iv 769 Ram - 8 Gb Ddr-Iv 770 Ram - 8 Gb Ddr-Iv 771 Ram - 8 Gb Ddr-Iv 772 Ram - 8 Gb Ddr-Iv 773 Ram - 8 Gb Ddr-Iv 774 Ram - 8 Gb Ddr-Iv 775 Ram - 8 Gb Ddr-Iv 776 Ram - 8 Gb Ddr-Iv 777 Ram - 8 Gb Ddr-Iv 778 Hdd Drive ( Internal ) 1Tb- Satta 779 Hdd Drive ( Internal ) 1Tb- Satta 780 Hdd Drive ( Internal ) 1Tb- Satta 781 Hdd Drive ( Internal ) 1Tb- Satta 782 Hdd Drive ( External ) 1Tb-Usb 783 Hdd Drive ( External ) 1Tb-Usb 784 Hdd Drive ( External ) 1Tb-Usb 785 Hdd Drive ( Internal ) 500 Gb 786 Hdd Drive ( Internal ) 500 Gb 787 Hdd Drive ( Internal ) 500 Gb 788 Hdd Drive ( External ) 500 Gb 789 Hdd Drive ( External ) 500 Gb 790 Dvd Writer 791 Dvd Writer 792 Ups 600 Va 793 Ups 600 Va 794 Ups 800 Va 795 Ups 800 Va 796 Ups Battery - 12 Volt 7Amp 797 Key Board 798 Key Board 799 Key Board 800 Mouse 801 Mouse 802 Mouse 803 Bios Battery -3 Volt 804 Monitor 19.5 Led 805 Monitor 19.5 Led 806 Monitor 19.5 Led 807 Monitor 19.5 Led 808 Monitor 21 Led 809 Monitor 21 Led 810 Monitor 21 Led 811 Monitor 21 Led 812 Monitor 32 Led 813 Monitor 32 Led 814 Monitor 32 Led 815 Monitor 32 Led 816 Printer ( Dot Matrix ) - 817 Leaser Printer Ink 818 Leaser Printer Ink 819 Dot Matrix Printer Head - T.V.S 820 Dot Matrix Printer Head - T.V.S 821 Taflon Paper Of Laser Printer Hp 822 Printer ( Laser Jet 1020 Plus ) Hp 823 Tab 824 Tab 825 Wireless Mouse 826 Wireless Mouse 827 Wireless Mouse 828 Printer Laser Jet P1007 829 Printer Laser Jet P1007 830 Printer Cartridges 831 Printer Ribbon Tvs - Msp 345 Star 832 Computer Table 833 Computer Ribbon Cartridge Lq-664 834 Colour Printer 835 Colour Printer 836 Colour Printer 837 Colour Printer-Ink 838 Colour Printer-Ink 839 Colour Printer-Ink 840 Colour Printer Head 841 Fax Machine 842 Broad Band Modem 843 Printer Refilling 844 Printer Refilling 845 Printer Refilling 846 Riffling Of Cartridge 847 Riffling Of Cartridge 848 Riffling Of Cartridge 849 Hdmi Splitter 850 Hdmi Cable 851 Cat -6 Lan Cable 852 Rj 45 Connector 853 Laptop 854 Laptop 855 Laptop Battery 856 Laptop Battery 857 Laptop Battery 858 Laptop Battery 859 Anti Virus ( 1User 1Yr ) 860 Anti Virus ( 1User 1Yr ) 861 Anti Virus ( 1User 3Yr ) 862 Anti Virus ( 1User 3Yr ) 863 Anti Virus ( 3User 3Yr ) 864 Anti Virus ( 3User 3Yr ) 865 Anti Virus ( 5 User 3Yr ) 866 Anti Virus ( 5 User 3Yr ) 867 Speaker Box 868 Speaker Box 869 Dongle Usb Modem 870 Dongle Usb Modem 871 Dongle Usb Modem 872 Dongle Usb Modem 873 Cloud Router 874 Cloud Router 875 8 Port Switch Multi Hub 876 Operating System-Multiuser 877 Operating System 878 Operating System 879 External Usb Port 880 Switching Box For Multi Connection Of Net 881 Wifi Dongle 882 Wifi Dongle 883 Wifi Dongle 884 Usb To Lan Port / Card 885 Usb To Lan Port / Card 886 Usb To Lan Port / Card 887 C.C.T.V. Camera 888 8 Ch Nvr 889 16 Ch Nvr 890 32 Ch Nvr 891 Ip 4Mp Bullet 892 4 Port Poe 893 8 Port Poe 894 Ip 4Mp Dome 895 Cat 6 Wire 896 Dvr Lock Box 897 C.C.T.V. Cable & Wire 898 Coaxialcable 899 C.C.T.V. Connector 900 Digital Video Recorder 901 Dc Power Cable 902 Video Baluns 903 Security Camera Microphone 904 C.C.T.V. Video Multiplexers 905 Wireless Video Transmitters 906 Security Camera Lens 907 Siamese Cable 908 Telephone Receiver 909 Telephone Receiver 910 Telephone Receiver Color Id 911 Telephone Receiver Color Id 912 Set Top Box-Digital / Hd With Recoding-1 Yrs. Package With Full Channals 913 Set Top Box-Digital / Hd With Recoding-1 Yrs. Package With Full Channals 914 Disk Tv Monthly Recharge 915 Disk Tv Monthly Recharge 916 Jio Fiber Monthly Recharge 917 Mobile Phone-Android With Gps Facility Withcamera 918 Mobile Phone-Android With Gps Facility Withcamera 919 Mobile Phone-Android With Gps Facility Withcamera 920 Mobile Phone-Android With Gps Facility Withcamera 921 Steel Almirah ( Big Size ) 78”X36”X22” 922 Steel Almirah ( Medium Size ) 60”X36”X20” 923 Book Self ( 78”X36”X22” ) Wooden 924 Book Self ( 78”X36”X22” ) Steel 925 Filing Cabinet ( 60”X36”X20” ) 926 Steel Rack ( 45X61X22 ) 927 Steel Table 928 Executive Table 929 Wooden Table 930 Wooden Table 931 Wooden Table 932 Wooden Table 933 Wooden Table 934 Wooden Rack 935 Wooden Rack 936 Wooden Rack 937 Wooden Rack 938 Wooden Rack 939 Wooden Rack 940 Wooden Rack 941 Wooden Chair 942 Wooden Chair 943 Wooden Chair 944 Wooden Chair 945 Wooden Chair 946 Wooden Chair 947 Wooden Chair 948 Steel Chair 949 Plastic Chair 950 Executive Chair ( Big Size ) 951 Executive Chair ( Small Size ) 952 Revolving Chair 953 Computer Chair 954 Computer Chair ( Without Arm ) 955 Fiber Chair 956 Fiber Chair ( Without Arm ) 957 Fiber Table 958 Wooden Tool 959 Wooden Back Bench 960 Fiber Tool 961 Table Glass ( 5 Mm / 8Mm ) 962 Wooden Rifle Rack 10 Capacity With Single 963 Wooden Rifle Rack 10 Capacity With Single 964 Wooden Rifle Rack 10 Capacity With Single 965 Wooden Rifle Rack 10 Capacity With Double 966 Wooden Rifle Rack 10 Capacity With Double 967 Wooden Rifle Rack 10 Capacity With Double 968 Wooden Rifle Rack 20 Capacity With Single 969 Wooden Rifle Rack 20 Capacity With Single 970 Wooden Rifle Rack 20 Capacity With Single 971 Wooden Rifle Rack 20 Capacity With Double 972 Wooden Rifle Rack 20 Capacity With Double 973 Wooden Rifle Rack 20 Capacity With Double 974 Office Chair Plastic 975 Wooden Dining Table 976 Wooden Dining Table 977 Wooden Dining Table 978 Wooden Dining Bench 979 Wooden Dining Bench 980 Wooden Dining Bench 981 Notice Board With Glass 982 Steel Bench 983 Display Board 984 Map Board 985 Door Mats 986 Wall Cabinet 987 Side Cabinet 988 Hang Mirror 989 Door & Window Curtain With Fittings 990 Door & Window Curtain With Fittings 991 Wooden Cot 992 Wooden Cot 993 Wooden Cot 994 Wooden Cot 995 Almirah Lock Repairing 996 Photo Binding With Mirror 997 Cellotape With Cutter 998 Cup & Plate 999 Cup & Plate 1000 Date Stamp With Lock 1001 Desk Cellender 1002 Desk Cellender Stand 1003 Drinking Glass 1004 Drinking Glass 1005 Punching Machine Big 1006 Punching Machine Mideum 1007 Sealing Wax 1008 Table Tray 1009 Table Top 1010 Bill Register200 Sheet 1011 Black & White Printing A-4 Paper 1012 Black & White Printing Legal Paper 1013 Colour Printing A-4 Paper Ban Paper 1014 Pocket Diary 1015 Colour Photo Print ( 4 / 6 ) 1016 Colour Photo Print ( 5 / 7 ) 1017 Colour Photo Print ( 8 / 10 ) 1018 Colour Photo Print ( 8 / 12 ) 1019 Iron Trunk 1020 Hipping Hammer 1021 Serch Light / Dragon Light Cherger 1022 Wax 1023 Sandwich Maker 1024 Sandwich Maker 1025 Sandwich Maker 1026 Toaster 1027 Toaster 1028 Toaster 1029 Toaster 1030 Dinner Set 1031 Dinner Set 1032 Dinner Set 1033 Wall Hanger 1034 Hot Pot Bowl 1035 Hot Pot Bowl 1036 Table Mat 1037 Exhaust Fan 1038 Exhaust Fan 1039 Exhaust Fan 1040 Exhaust Fan 1041 Exhaust Fan Repairing 1042 Desk Organiser 1043 Tv 32 1044 Tv 32 1045 Tv 32 1046 Tv 43 1047 Tv 43 1048 Tv 43 1049 Tv 55 1050 Tv 55 1051 Tv 55 1052 Tv 60 1053 Tv 60 1054 Tv 60 1055 Mobile Power Bank 10000 Mah 1056 Mobile Power Bank 10000 Mah 1057 Mobile Power Bank 20000 Mah 1058 Mobile Power Bank 20000 Mah 1059 Mobile Power Bank 27000 Mah 1060 Mobile Power Bank 27000 Mah 1061 Mobile Charger 1062 Furniture Painting 1063 Furniture Painting 1064 Furniture Painting 1065 Green Tea 1066 Coffee 1067 Darjelling Tea 1068 Sweets 1069 Biscuit 1070 Sugar Cube 1071 Rice 1072 Dal 1073 Fish 1074 Vaja 1075 Chatni 1076 Sweets 1077 Books 1078 Bicycle 1079 Broad Band Connection + Installation + Monthly Package 1080 Normalbook Binding 1081 Hard Cover Book Binding 1082 Cloth Book Binding 1083 Spiral Book Binding 1084 Wooden Bench 1085 Wooden Bench 1086 Wooden Bench 1087 Wooden Low Bench 1088 Wooden Low Bench 1089 Wooden Low Bench 1090 Cup Plate Set ( Bone China ) 1091 Ash Tray 1092 Microtek Intel Pure Sine Wave 1625 W E2+ Inverter With 150 Amp It 500 ( Exide ) Battery & Trolley 1093 Microtek Intel Pure Sine Wave 1625 W E2 Repairing 1094 Microtek 1825 E2 Sine Wave Inverter With 02 No. 150 Amp It 500 ( Exide ) Battery & Trolley 1095 Microtek 1825 E2 Sine Wave Inverterrepairing 1096 Microtek 1225 E2 Inverter With 01 No. 150 Amp It 500 ( Exide ) Battery & Trolley 1097 Microtek 1225 E2 Inverter Repairing 1098 Invatubllar Battery 150 Amp It 500 ( Exide ) 1099 Microtek E2 + 1625 Va Sine Wave Ups Fy 1813 Inverter With Battery & Trolley 1100 Microtek E2 + 1625 Va Sine Wave Ups Fy 1813 Inverter Repairing 1101 Gastifier Stove 1102 Repair Of Gastifier Stove 1103 Chapatti Vati Machine 1104 Repair Of Chapatti Vati Machine 1105 Wooden Table & Rack 1106 Wooden Table & Rack 1107 Wooden Table & Rack 1108 Ornate Chair 1109 Jute Sack 1110 Target Paper 1111 Figure 11 1112 Repairing Of Furniture 1113 Repairing Of Furniture 1114 Sprite Polish Of Wooden Door 1115 Polishing & Colouring Of Furniture Wooden 1116 Polishing & Colouring Of Furniture Steel 1117 Uniball Pen All Colour 1118 Year Diary 1119 Executive Diary 1120 Wall Calendar Printing 1121 Sofa Set One Sitter 1122 Sofa Set Three Sitter 1123 Centre Table Wooden With Glass Fittin 1124 Centre Table 1125 Kitchen Chimney 1126 Kitchen Chimney 1127 Kitchen Chimney 1128 Microwave 1129 Microwave 1130 Microwave 1131 Microwave 1132 Micro Plate / Bowl 1133 Refrigerator 1134 Refrigerator 1135 Refrigerator 1136 Refrigerator 1137 Hooter 1138 Signature Pad 1139 Pen 1140 Pen 1141 Ball Pen 1142 Permanent Marker Pen For Signature 1143 Steel Buffet 1144 Buffet Gel 1145 Iron Floor And Desk Stand 1146 Pbx Machine 1147 Wooden Desk Calendar 1148 Paper Weight Glass 1149 Paper Weight Plastic 1150 Metal Key Chain 1151 Tissue Paper Holder 1152 Juicer 1153 Juicer 1154 Juicer 1155 Video Camera 1156 Video Camera 1157 Video Camera 1158 Breath Analyzer 1159 Breath Analyzer 1160 Stamp Pad 1161 Hand Towel 1162 Tag ( Long Size ) 1163 Alpin 1164 Saxophone 1165 Clarinet 1166 Trumpet 1167 Euphonium 1168 Euphonium Spring 1169 Big Drum 1170 Side Drum 1171 Side Drum Synthetic 1172 Bugler 1173 Bugler Mouth Piece 1174 Trumpet Mouth Piece 1175 Euphonium Mouth Piece 1176 Bugle Siling 1177 Trumpet Spring 1178 Big Drum Synthetic 1179 Big Drum Biter 1180 Big Drum Siling 1181 Side Drum Stick 1182 Side Drum Siling 1183 Clarinet Bob 1184 Saxophone Bob 1185 Pipe Rid 1186 Chanter Rid 1187 Leather 1188 Wax 1189 Side Drum Synthetic 1190 Side Drum Stick 1191 Side Drum Siling 1192 Big Drum Biter 1193 Big Drum Belt 1194 Tener Drum Biter 1195 Tener Drum Belt 1196 Pipe Don 1197 Lerniar 1198 Solder Cover 1199 Batch 1200 Belt 1201 Shall 1202 Beret Cap 1203 Crown 1204 Pipe Chanter 1205 Practice Chanter 1206 Saxophone Repair 1207 Clarinet Repair 1208 Trumpet Repair 1209 Euphonium Repair 1210 Dress For Brass Band 1211 Dress For Pipe Band 1212 Saxophone Rid 1213 Clarinet Rid 1214 Saxophone Mouth Pice 1215 Clarinet Mouth Pice 1216 Side Drum Spring 1217 Tie 1218 Leather Cover 1219 Flue Pipe 1220 Pipe Cord 1221 Pipe Master Stick 1222 Brass Master Stick 1223 Officer’S Cap 1224 Saxophone Box 1225 Saxophone Neck Strip 1226 Clarinet Box 1227 Trumpet Box 1228 Activated Carbon 1229 Gravels Stone 1230 Mno2 1231 Treated Sand 1232 Anthracite 1233 Clorin 1234 Anti Scelent Chemicals 1235 Add Minerals 1236 Sodium Bicarbonate 1237 5 Micron Jambu Filter 1238 Dosing Pump Pipe 1239 Back Wash Valve 1240 Multiport Valve 1241 Uv System 1242 Ro Membren ( 250Lph ) 1243 Chemical For Washing 1244 Citric Acid 1245 High Pressure Pump ( Cri ) 1246 Raw Water Pump 1247 Pressure Metre 1248 Flow Metre 1249 Vessel 1250 Lesser Pipe 1251 Jambu Filter 1252 Jambu Cartage 1253 Dosing Pump 1254 Electric Panel 1255 1 Hp Raw Pump 1256 Pipe Fitting 1257 Meneral Powder 1258 Silex 1259 Condenser Ac Machine 1260 Compressor Ac Machine 1261 Capacitor Ac Machine 1262 Fan 1263 Gas Change 1264 Pipe 1265 Circuit Change 1266 Sensor 1267 Legal Size Conquest / Ledger Paper 1268 Candle 10” 1269 Iron Cartridge 1270 Classic Block 1271 P.C.B. 1272 Servicing 1273 Candle 10” 1274 Iron Cartridge 1275 Hi Flow Block 1276 P.C.B. 1277 Servicing 1278 Dr. Classic 1279 Uv+Uf ( 6.2 Ltrs. ) 1280 Nxt Uv ( 8.5 Ltrs. ) 1281 Uv ( 7 Ltrs. ) 1282 Ro+Uv ( 6.2 Ltrs. ) 1283 Ro+Uv ( 8.5 Ltrs. ) 1284 Ro+Uv ( 7 Ltrs. ) 1285 Pipe Ribbon 1286 Pipe Lather Cover 1287 Pipe Flag 1288 Pipe Mouth Piece 1289 Clarinet Notation Stand 1290 Trumpet Notation Stand 1291 Saxophone Notation Stand 1292 Music Manuscript Book 1293 Jona Dohar ( Double ) 1294 Jona Dohar ( Single ) 1295 Jona Dohar ( Double ) 1296 Jona Dohar ( Single ) 1297 Small Hand Towel 1298 Blanket ( Double ) 1299 Mattress ( 6’X7’ ) 1300 Mattress ( 5’X6’ ) 1301 Mattress ( 4’X6’ ) 1302 Bracket 1303 Still Pipe For Curtain 1304 Rent Of Cctv Camera 1305 Curtain Cloth 1306 Vacuum Cleaner 1307 Tea Table 1308 Wire Clip 1309 Elastic 1310 Sofa Cover 1311 Switch 6 Amp 1312 Hanger 1313 Table Lamp 1314 Small Towel 1315 Cpu Repair / Servicing 1316 Microwave Oven 1317 Portable Hard Drive ( 1 Tb ) 1318 Geyser ( 10 Ltr. ) 1319 Cd- Rw 1320 Ink Tank 419 Wifi Colour Printer 1321 Antivirus ( For 5 Users 1 Year ) 1322 Ram For Laptop ( 4 Gb ) 1323 Roti Maker Machine 1324 Roti Maker Machine Repairing 1325 Hard Disk 1 Tb 1326 Ssd 256 Gb 1327 Ssd 128Gb 1328 Ssd 1000 Gb 1329 Big Size Towel 1330 Big Size Towel 1331 Processor 1332 Mother Board A32m-H 1333 Ram Ddr4 4Gb 1334 Monitor 27”- Hp ( Full Hd ) 1335 Cache Memory 12 Mb 1336 Processor Frequency1.8 1337 Printer ( Laser Jet Printer Cum Scanner Machine ) 1338 Ups -600W 1339 Distilled Water 1340 Dress Cord 1341 12 Mm. Ply With Sunmica With Fitting And Fixing 1342 18 Mm. Ply With Sunmica With Fitting And Fixing 1343 Printer Cartridge 1344 Tonner 1345 Printer Tonner Refilling With Drum Change ( 12A ) 1346 Succession Board Printing 1347 Moulded Dining Table 1348 Smps With Cabinet 1349 Smps With Cabinet 1350 Smps With Cabinet 1351 Smps With Cabinet 1352 Smps With Cabinet 1353 Smps With Cabinet 1354 Smps With Cabinet 1355 Smps With Cabinet 1356 Smps With Cabinet 1357 Compatible Cartridges 12A 1358 Ups 1Kva 1359 Repairing / Servicing Ofleaser Jet 1020 Printer 1360 Dvd 1361 Table Calendar Printing 1362 Ink Tank 419 Wifi Colour Printer Ink 1363 Mother Board Jumpering / Servicing 1364 4 Port 1365 M.C. ( Media Converter ) 1366 Adapter ( 12 V 2 Amp ) 1367 Adapter ( 05 V 2 Amp ) 1368 Patch Cord 1369 Hdmi To Vga Converter 1370 Wireless Key Board 1371 Wireless Key Board & Mouse Combo Pack 1372 Installation Of Cctv Camera 1373 Dual Core Processor 1374 Cpu Fan 1375 Ps Ii Converter 1376 Wooden Door Painting 1377 Ink Tank Wireless 419 Printer Ink ( Black ) 1378 Ink Tank Wireless 419 Printer Ink ( A. Cyan / B. Megenta / C. Yellow ) 1379 Window Glass Change 1380 Steel Window Repair 1381 Computer Format 1382 Wooden Window Repair 1383 Wooden Window Painting 1384 Wooden Door Frame Change 1385 Wooden Window Frame Change 1386 Wooden Door Making 1387 Wooden Window Making 1388 Printer Tonner Refilling 1389 Cnadle Stand ( A. Large / B. Medium ) 1390 Magazine Stamping 1391 Star Plate For Vehicle 1392 Glow Sign Board Printing On Synthetic Cloth 1393 Steel Almirah ( Small ) 1394 Hiring Of Centre Table 1395 Hiring Of Sofa Set ( A. 3 Seater / B. 1 Seater ) 1396 Air Fryer 1397 Air Fryer 1398 Sprite Polish Of Wooden Table 1399 Sprite Polish Of Wooden Chair 1400 Sprite Polish Of Wooden Almirah 1401 D.S.C. 1402 P.O.E. Box 1403 Optic Fiber 1404 Joint Box 1405 Electric Socket 1406 Pvc Box 4 X 4 1407 Pvc Box 5 X 5 1408 Sprite Polish Of Wooden Window 1409 Fiber Join 1410 Battery 950 1411 Battery 950 1412 Battery 950 1413 Flower Vase 22 ( Bone China )
Contract Date: May 05, 2026 Contract Value : 1.04 Crore
Statutory Bodies & Commissions/Committees No of Bidders 10
West Bengal View Result →
12.
Home Affairs #10976727 Price Bid
SUPPLY OF FORMS & STATIONARY ITEMS/MISCELLANEOUS ARTICLES LIKE FURNITURE AND FIXTURE, COMPUTER PERIPHERALS, R.O. PLANT MATERIALS, DIFFERENT HIRING ITEMS, VARIOUS MACHINERYPARTS.ETC , Pen (Red) , Pen (Blue) , Pen (Black) , Pen (Green) , Refill (Red) , Refill (Blue) , Refill (Black) , Refill (Green) , Ball Pen (Red) , Ball Pen (Blue) , Ball Pen (Black) , Blank C.D. & D.V.D. Plastic Cover , Bodkin With Eye As Per Sample , Bound Register Un-Ruled 150 Sheet As Per Sample , Bound Register Un-Ruled 300 Sheet As Per Sample , Bound Register Un-Ruled 400 Sheet As Per Sample , Bound Register No. 08 Un-Ruled 120 Sheet Conquest Pages , Bound Register No. 08 Ruled 120 Sheet Conquest Pages , Bound Register No. 10 Un- Ruled 150 Sheet Conquest Pages , Bound Register No. 10 Ruled 150 Sheet Conquest Pages , Bound Register No. 04 Un-Ruled Conquest Pages , Bound Register No. 04 Ruled Conquest Pages , Bound Register No. 12 Un- Ruled 200 Sheet Conquest Pages , Calculator (12 Digit)Big Size 112 Steps,Check & Correct Best Quality , Collin Big Size , Compute Paper 80 Column (With Carbon) As Per Sample , Compute Paper 80 Column (Without Carbon) As Per Sample , Correction Pen , Chalk Pencil , 2 Inch Paper Binder Clip Clam , Cellotape Cutter , Channel File , Clip Board File (Plastic) , Borosil With Lid , Duplicating Paper (Size- 21 X 33 Cm) 500 Sheet , Duster Cloth (Size- 54 X 30 Cm) , Duster Cloth (Big Size) , Duster Cloth (Regular) , Duster Wood (Best Quality) , Eraser , Folio Bag For Office Use (Best Quality) , Fax Roll , Gum 300 Ml. Bottle , Gum 700 Ml. Bottle , Gum Tube 50 Ml , Gum Tube 20 Ml , 12 Laser Jet Printer Toner Cartridge 1020 , Paper Hollder Stand , High Light Pen , James Clip , Key Bag Medium Best Quality , Knife Big Size , Marker Pen With Cdm , Marker Pen Permanent , Cd Blank ( R ) , Gala Stamp , Dvd Blank ( R ) , Dvd Blank ( R / W ) , Legal Size Conquest/ Ledger Paper , Note Pad (Itc) , Paper Weight Squire Type Best Quality , Pendrive (16 Gb) , Pendrive (32 Gb) , Pendrive (08 Gb) , Pen Stand Best Quality Medium , Pen Stand Best Quality Big , Pencil , Art Paper , Pencil Carbon (Dfc Size) , Pencil Carbon (Sf Size) , Pilot Pen V5/ V7 (Red) , Pilot Pen V5/ V7 (Blue) , Pilot Pen V5/ V7 (Black) , Pilot Pen V5/ V7 (Green) , Pin Cushion (Metalic) Best Quality , Pin Easy Push Bright Electro Nickel Plated , Plastic Water Jug Best Quality , Paper Memo Holder , Punching Machine , Pointed Ball Pen (Red & Blue) , Paper Holding Binder Clip , Plastic Storage Clip Board , Cheque Book Holder , Sticky Note Pad Large , Sticky Note Pad Small , Refill Gel Pen (Red) , Refill Gel Pen (Blue) , Refill Gel Pen (Black) , Refill Gel Pen (Green) , Tag (Long Size) , Safety Match Box , Classic Block , Permanent Marker Pen For Signature , Scale Wooden06 Inch , Scale Wooden12 Inc , Scissors For Paper Cutting Best Quality Big Size , Sharpner , Sinature Pad (25 Pages With Board Binding) , Sponge With Plastic Case Best Quality , Stamp Pad , Stamp Pad Ink (60Ml) , Stand Candle (Medium) , Stapler Machine (Big 24/6 Size) , Stapler Machine (Small 10 Size) , Date Stamp With Lock , Stapler Pin (Big 24/6 Size) , Stapler Pin (Small 10 Size) , Steel Mnual Call Bell , Self Adhesive Tape 2 Inch Wide , Sketch Pen , Alpin , Table Calling Bell Best Quality , Tag Cotton As Per Sample , Thread Bal (Red) , Thread Bal (White) , Temporary Marker Pen For White Board , Tvs Cartridges Hd755 Ribbon , Tvs Cartridgesprodot Ribbon , Tvs Cartridges Hd745 Ribbon , Tvs 345 Msp Star Ribbon Pronter Cartridges (For 136 Collumn 9/24 Pin Dot Matrix Printers ) , Use And Throw Ball Pen (Blue) , Use And Throw Ball Pen (Black) , Use And Throw Ball Pen (Red) , Use And Throw Pen (Blue) , Use And Throw Pen (Black) , Use And Throw Pen (Red) , Waste Paper Busket (Plastic) Best Quality , White Paper Dfc Size Andhrapradesh -43X69 Cms. 8.6 Kg , White Paper Fc Size , White Board Marker Pen , Wooden Pencil ( Hard-2B ) , Wooden Pencil (Medium Hb ) , Xerox Paper A4 Size Normal Quality , Xerox Paper Legal Size Normal Quality , Colour Flap , Paper Weight Plastic , Feviquick Gum , Fevi Stick Gum , Cello Tape , Steel Scale 12 Inch , Plastic Scale 12 Inch , Stapler Machine Hp 45 Big Size , Photo Paper , Paper Binder Clip Clamp , Camlin White Glue 50 Gm , Bound Register Ruled 600 Sheets Conquest Pages , Bound Register Un-Ruled 600 Sheets Conquest Pages , Luxor V-5 Pen , Bill Register Per Register Containing 200 Sheets With Board Binding Both Side Printing , Bill Register And Page Numbering , Cl Register Containing 100 Sheets Per Book With Page Numbering Covering With Cloth Binding As Per Sample Copy , Challan Form Per 1000 No. Pad Binding 506 Single Side Printing , Contingent Charges Register Per Register Containing 200 Sheets With Cloath Binding Both Side Printing , Contingent Charges Register And Page Numbering , Attendence Register Per Register Containing 56 Sheets With Cloath Binding Both Side Printing , Attendence Register And Page Numbering , Bill Ext. Form Per 1000 Numbers Pad Binding 500 Sheets (Single Side Printing) , Opd Ticket For Hospital Per 1000 Numbers Pad Binding 500 Sheets (Single Side Printing) , Form Of Leave Account Per 1000 Numbers Pad Binding 500 Sheets (Singly Side Printing) , Leave Application Per 1000 Numbers Pad Binding 500 Sheets (Singly Side Printing) , Peon Book Per 1000 Numbers Pad Binding 500 Sheets ( Both Side Printing And Page Numbering) , Master Roll Per Register Containing 200 Sheets With Cloth Binding Both Side Printing , Master Roll Per Register Containing 100 Sheets With Cloth Binding Both Side Printing , Master Roll Per Register Containing 150 Sheets With Cloth Binding Both Side Printing , Master Roll And Page Numbering , Cheque Register Per Register Containing 50 Pages With Boarding As Per Sample (Both Side Printing) , Form Of Nomination For Death Gratuity Per 1000 Number As Per Sample Copy Including Pad Binding 500 Sheets (Singly Side Printing) , Committee Register Per Register Containing 200 Sheets With Board Binding (Both Side Printing) , Admission Of Gpf Form Per 1000 Number As Per Sample Copy Including Pad Binding 500 Sheets (Single Side Printing) , Service Roll Containing 36 Pages Per Book With Cloth Binding As Per Sample With Page Numbering , Form Of Duty Register Containing 500 Pages Per Register With Cloth Binding As Per Sample With Page Numbering , Cc Book Containing 100 Pages Per Book In Dublicate Covering With Cloth Binding And Page Numbering , Distribution Of Arms Form Per 1000 Numbering With Pad Binding 500 Sheets (Single Side Printing) , General Diary Book Per 1000 Numbering With Pad Binding 500 Sheets (Single Side Printing) , El Register Containing 200 Pages Per Book Cobvering With Cloth Binding As Per Sample. , Ext. Acquaintance Roll (Wbf No. 5214)Per 100 Numbers With Pad Binding 500 Copies Single Side Printing , Cover File Double Plastic Coated , Folder File Double Plastic Coated , File Flap Double Plastic Coated , Order Book Containing 100 Pages Per Book Covering With Board Binding Page Numbering And Single Side Printing , Form Of Salary Statement Of Income Tax Per 1000 Numbers As Per Sample Copy Including Pad Binding 500 Copies (Both Side Printing) , Form Of Salary Statement Of The Employees Per 1000 Numbers As Per Sample Copy Including Pad Binding 500 Copies (Both Side Printing) , Form Of Submission Income Tax Statement (Form-16) Per 1000 Numbers As Per Sample Copy Including Pad Binding 500 Copies (Both Side Printing) , Stock Book Of Departmental Containing 1000 Pages Per Register With Cloth Binding As Per Sample. , Tr Form No.-50 Per 1000 Numbers With Pad Binding 500 Copies (Single Side Printing) , Tender Bookcontaining 300 Pages Per Register With Board Binding (Both Side Printing) , Drivers Car Diary Containing 50 Pages Per Diary. , Tr Form No.-21 Per 1000 Numbers As Per Sample Including Pad Binding 500 Sheets (Both Side Printing) , Morning Report (Dg & Igp Cr. Wb) =W= Dig (Ap) Bkpore =W= Dg & Igp (Ap) Wb Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Morning Report Dig (Ap) Nb Slg =W= Dg & Igp (Ap) Wb =W= Igp (Ap) Nb Slg Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Morning Report Igp (Ap) Nb Slg =W= Dig (Ap) Nb Slg =W= Dg & Igp (Ap) Wb Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Morning Report Of Sap 4Th Bn., Kasba, Raiganj, Uttar Dinajpur Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Ammunition Formper 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Issue Voucher Form Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Casualty Form Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Receipt For Payment W.B.P.M.I.P. Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , B Declaration For Pa Claim Form Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Declaration Of Family Particulars Per 1000 Numbers With Pad Binding 500 Sheets Single Side Printing. , Firing Registers 100 Pages Board Binding , Allotment Register 150 Pages Board Binding , Order Book 400 Pages Board Binding , Order Book 200 Pages Board Binding , Orderly Room Register 100 Pages Board Binding , Pd Book 100 Pages (Single Side Printing With Duplicate) , Inspection Report Book (Wbf No. 5308 Big Size) 107 Pages Board Binding , Inspection Report Book (Wbf No. 5308 Legal Size) 100 Pages Board Binding , Gpf Register 700 Pages , Cash Book 300 Pages , Rubber Stamp , El Register 300 Pages , El Register 100 Pages , Letter Pad 70 Pages , Leaflet (Both Side) 100 Pcs , Bill Transit Register 100 Pages , Clothing Hand Book Wbp Form No. 5341 (25 Pages) , Receipt For Payment Of Electric Current Charges 100 Pages , Service Bookcontaining 43 Pages Per Book With Cloth Binding As Per Sample With Page Numbering , Form Of Tender 500 Pages , Weekly Pending List (Form No. 203) 100 Pages , Stock Book Of Forms 300 Pages Per Register With Cloth Binding , Stock Book Of Stationary Articles 200 Pages Per Register With Cloth Binding , Received Register Per Register Containing 400 Sheets With Board Binding (Both Side Printing) , Despatch Rigister Per Register Containing 400 Sheets With Board Binding (Both Side Printing) , Register Of Contingent Charges Wb Form No. 2401 ( 324 Pages) , Register Of Contract Contingent Charges Wb Form No. 2402 ( 100 Pages) , Clothing Stock Book 200 Pages , Duty Register Per Register Containing 100 Sheets With Binding Both Side Printing And Page Numbering , Envelope (9.5 X 4.5) Plain Small 100 Pc Per Bundle , Envelope Ordinary (6 X 12) Plain 100 Pc Per Bundle , Envelope (16 X 12) 100 Pc Per Bundle , Envelope Big Size (Cloth) 100 Pc Per Bundle , Envelope A4 Size 100 Pc Per Bundle , Gpf Register 600 Pages (Binding With Cloth Cover) , Gpf Register 400 Pages (Binding With Cloth Cover) , Register Of Proceeding 100 Pages Per Book , Register Of Casualities 100 Pages Per Book , Training Data Form 500 Pages (01 Rim) , Cl Register Containing 200 Sheets Per Book With Page Numbering Covering With Cloth Binding As Per Sample Copy , Ta Bill Register (Formate) 300 Pages , Trodat Stamp , Note Sheet 100 Pages With Sl No. , Pocket Diary , Ta Bill Register (Formate) 200 Pages , Do Letter Pad 70 Pages , 100 Point Register With Binding (300 Pages) , Held Over Register With Binding (200 Pages) , Brown Target Paper , White Binding Paper , Office Diary , Book Binding (Hard Cover Binding) 100 Pages , Book Binding 100 Pages , Book Binding (Cloth Binding) 100 Pages , Book Binding (Normal Binding) 100 Pages , Book Binding (Spiral Binding) 100 Pages , Year Diary (Times) , Executive Diary , Signature Pad , Bill Register200 Sheet , Black & White Printing A-4 Paper , Black & White Printing Legal Paper , Colour Printing A-4 Paper Ban Paper , Pocket Diary , Paper Weight Glass , Normalbook Binding , Hard Cover Book Binding , Cloth Book Binding , Spiral Book Binding , Wall Calender Printing , Ro+Uv + Uf (07 Ltr. Store + 15Ltr./Hr Purify) , Ro+Uv + Uf +Tds (10 Ltr. Store + 15Ltr./Hr Purify) , Water Purifier Machine , Repair Of Water Purifier Machine , Ro Membren , Sediment , Carbon , Booster Pump , Sounoid Valve , Tds Controller , Sensor Float Valve , Ccb , Uv Lamp , Uv Housing , Main Wire , Iron Removal , Uf Membren , Post Carbon , Carbon Of Water Purifier Machine , Candle 10” , Iron Cartridge , Hi Flow Block , P.C.B. , Uv+Uf (6.2 Ltrs.) Dr. Classic , Nxt Uv (8.5 Ltrs.) Dr. Classic , Uv (7 Ltrs.) Dr. Classic , Ro+Uv (6.2 Ltrs.) Kent , Ro+Uv (8.5 Ltrs.) Kent , Ro+Uv (7 Ltrs.) Kent , Ro+Uv (6.2 Ltrs.) Aquaguard , Ro+Uv (8.5 Ltrs.) Aquaguard , Ro+Uv (7 Ltrs.) Aquaguard , Bandage 2½ , Battery 750 , Battery Charger 12 V 2 Amp , Battery Charger 12 V 4 Amp , Battery Charger 12 V 8 Amp , Battery Dry Cell 12Volt. Rechargeable , Battery Dry Cell 6 Volt. Rechargeable , Battery (Medium) , Battery (Pencil) , Bed Switch 6 Amp. , Bell Push Switch (Box Type) , Black Patching Paper , Black Tape (Pvc) , Water Cooler Ss 20/20 With Kent Filter (Ro + Uf + Tds Controller) & Repair , Repair Of Water Cooler Ss 20/40 , Water Cooler Ss 40/80 (Ro + Uf + Tds Controller) & Repair , Water Cooler Ss 40/80 (Ro + Uf + Tds Controller) Repair , Briefcase , Candle (Big Size) 6 Pcs. Pkd. , Carbon Filter , Casserole 1 Ltrs. , Casserole 2.5 Ltrs. , Casserole 4 Ltrs. , Casserole 5 Ltrs. , Casserole 10 Ltrs. , Ceiling Fan 48 (Orient Make) , Ceiling Fan 48 (Crompton Make) , Ceiling Fan 48 (Bajaj Make) , Ceiling Fan 52 (Orient Make) , Ceiling Fan 52 (Crompton Make) , Ceiling Fan 52 (Bajaj Make) , Ceiling Fan Regulator , Ceiling Fan Repairing And Coil Binding , Condenser For Ceiling Fan , Pedestal Fan (Orient Make) , Pedestal Fan (V-Guard Make) , Pedestal Fan (Usha Make) , Pedestal Fan Repairing And Coil Binding , Electronics Regulator For Fan , Portable Rough Pad Rewrteable , Paper And Card Shredder , File Desk Tray , Led Rice Lamp , Rice Lamp , Cup Platemedium Quality (6 Pcs Set) , Cup Plate (Bone China) Good Quality (6 Pcs Set) , Detergent Cake 100 Gm , Detergent Cake 250 Gm , Dinner Plate (Bone China) 6 Pcs. Set , Dinner Set (Bone China) Good Quality , Electric Kettle 1 Ltrs. , Electric Kettle 2 Ltrs. , Electric Kettle 4 Ltrs. , Emergency Light 6 Volt , Extension Cord (Skill) 07 Mtrs. , Extension Cord For Computer (7 Point) , (Ddl) Tube / Container Small , Fevicol (Ddl) Tube / Container Medium , Flask 1 Ltrs. , Flask 2 Ltrs. , Lock ((Navtal), 4 Lvs , Lock ((Navtal) 6 Lvs , Lock ((Navtal), 7 Lvs , Lock ((Navtal), 8 Lvs , Graphic Board , Graphic Board Figure½ , Graphic Board Figure 1 , Graphic Board Letter ½ , Graphic Board Letter 1 , Led Bulb 15 Watt (Philips) , Led Bulb 15 Watt (Havells) , Led Bulb 20 Watt (Philips) , Led Bulb 20 Watt (Havells) , Led Bulb 9 Watt (Philips) , Led Bulb 9 Watt (Havells) , Led Bulb 30 Watt (Philips) , Led Bulb 30 Watt (Havells) , Led Bulb 40 Watt (Philips) , Led Bulb 40 Watt (Havells) , Led Halogen 100 Watt (Philips) , Led Halogen 100 Watt (Havells) , Led Halogen 50 Watt (Philips) , Led Halogen 50 Watt (Havells) , Led Halogen 70 Watt (Philips) , Led Halogen 70 Watt (Havells) , Led Tube Set 20 Wat (Philips) , Led Tube Set 20 Wat (Havells) , Led Tube Set 40 Wat (Philips) , Led Tube Set 40 Wat (Havells) , Led Tube Set 30 Wat (Philips) , Led Tube Set 30 Wat (Havells) , Measuring Tape (Steel) 25 Mtrs. , Measuring Tape (Steel) 75Mtrs. , Measuring Tape (Steel) 100 Mtrs. , Measuring Tape6 , Measuring Tape 20 , Measuring Tape 50 , Measuring Tape 100 , Metal Bulb 250 Watt , Metal Bulb 500 Watt , Metal Choke 250 Watt , Metal Choke 500 Watt , Metal Lamp Complete Set 250 Watt , Metal Lamp Complete Set 500 Watt , Microphone , Microphone Cordless , Microphone Transistor (Ahuja) 80 Watt , Microphone Transistor 100 Watt , Microphone Transistor 120 Watt , Mike Set Unit And Horn , Sound Box50 Watt , Sound Box 80 Watt , Sound Box 100 Watt , Sound Box 120 Watt , Microphone Stand , Mixer Grinder 750W , Mixer Grinder 1200W , Ors 15 Mg Pouch , Ors 20 Mg Pouch , Ors 25 Mg Pouch , Ors 50 Mg Pouch , Ors- L (Pouch) , Phenyl , Pvc Tape (Big Roll) , Revibe (Big Size) , Room Freshener 375 Ml. , Steiner 200 Ml. Bot. , Starter For Ac 18-25 Amp , Starter For Ac 25 Amp (2 Ton) , Starter For Ac 25 Amp 2 Ton , Ac Machine Copper Pipe / Per Mtr. , Stop Watch (Digital) , Dslr Camera (Nikon) , Dslr Camera (Canon) , Thermo Flask 1 Ltrs (Eagle) , Thermo Flask 1 Ltrs (Milton) , Thermo Flask 2 Ltrs (Eagle) , Thermo Flask 2 Ltrs (Milton) , Tiffin Carrier Four Container (Steel) , Wall Clock (Digital) , Wall Clock , Wall Machine , Wall Clock Repair , Weight Machine (For Articles) 5 Kg Capacity With Units , Weight Machine Digital , Zeoline 50 Ml Bot. , Zeoline 100 Ml Bot. , Zeoline 200 Ml Bot. , Name Plate Brass Made (Per Letter) , Name Plate Board Plastic , Name Plate Board Wooden , Name Plate(Embroidery)/ Per Letter , Succession Board Fiber , Succession Board Wood , Succession Board Printing , Angle Drill , Flex/ Banner Per Sqft. , Basket Plastic , Double Bed Cover (Normal Quality) , Double Bed Cover (Best Quality) , Single Bed Cover (Best Quality) , Single Bed Sheet (Normal Quality) , Black Board Small / Per Sqft. , Black Board Medium / Per Sqft. , Black Board Big / Per Sqft. , Black Board Stand (Iron) , White Board Small / Per Sqft. , White Board Medium / Per Sqft. , White Board Big / Per Sqft. , Black Board Stand (Wooden ) , Black Fluorescent Tape 1 , Black Target Paper / Per Pc. , Blinker (Solar) , Bone Dust / Per Kg. , Bowl Set (Bone China) , By-Cycle Rim , By-Cycle Tube (Nylon) , By-Cycle Bell , By-Cycle Sit , By-Cycle Pumper , By-Cycle , Coffee Cup Small / Per Set , Coffee Cup Medium / Per Set , Coffee Glass , Coffee Mug , Cotton 100 Gm Pkd. , Cotton Mattress , Dustbin (Use Me) 14G.I. Sheet , Dustbin (Use Me) 18 G.I. Sheet , Dustbin Plastic (Leg Press) Big , Dustbin Plastic (Leg Press) Medium , Dustbin Plastic (Leg Press) Small , Duster Cloth , Fiber Glass 4 Mm Standard / Per Mtr. , Fiber Plate Small , Fiber Plate Medium , Fiber Plate Large , Fiber Sheet , Fiber Tray , Fire Bucket 12 , Fire Bucket 18 , Fire Extinguisher Refilling (2 Kg.) , Fire Extinguisher Refilling (5 Kg.) , Fire Extinguisher Refilling (9 Kg.) , First Aid Box (Medium Size) With All Necessary Equipment And Medicine , Flower Vase 22 Brass , Folding Chair (Steel) , Folding Cot (Nylon Fita) , Folding Table (Moulded) , Gala (Seal Wax) , Glass 3 Cell Torch , Glass Bowl , Glass Lid (4 Pcs. Set/6 Pcs. Set/8 Pcs. Set) , Glow Sign Board Complete Fitting (Per Sqft.) , Hand Sanitiser Dispensing Machine With Temperature Detection , Hand Towel (Standard Size) , Height Measuring Stand (Metal) , Hurricane Lantern (Local Made ) , Infrared Digital Thermometer , Iron Door Frame /Per Kg. , Iron Door Frame With Palla / Per Kg. , Iron Grill / Per Kg. , Iron Made Arms Rack / Per Kg. , Jurricane (Pvc) 5 Ltrs. , Letter Punch (A To Z) Brass & Steel , Liquid Measuring Equipment , Magnifying Glass , Markin Cloth Per Mtr. , Mask ( N-95) , Mask (Cloth) , Mask (Surgical) , Mirror Small / Per Sqft. , Mirror Medium / Per Sqft. , Mirror Long / Per Sqft. , Moulded Centre Table , Moulded Chair With Cushion , Moulded Chair With Handle , Moulded Chair Without Handle , National Flag , Pad Lock 5 Lvr. , Pad Lock 6 Lvr. , Pad Lock 7 Lvr. , Pad Lock 8 Lvr. , Paper Weight (Marble) , Paper Weight (Plastic) , Ply Board (Commercial) / Per Sqft. , Ply Board (Kit) , Wooden Furniture (Sal) Per Sqft. , Wooden Furniture (Sisu) Per Sqft. , Wooden Furniture (Akash Moni) Per Sqft. , Scissors For First Aid Box Small , Scissors For First Aid Box Medium , Scissors For First Aid Box Large , Scissors (Tailors) , Sealing Punch Machine , Side Pillow , Side Pillow Cover , Head Pillow , Head Pillow With Cover , Steel Scale 12 , Spoon Set (V.I.P.Steel) / Per Set , Spoon Set Plastic Handle /Per Set , Steel Spoon (Big) Vip / Per Set , Steel Fork Good Quality Small / Per Set , Steel Fork Good Quality Big / Per Set , Steel Spoon (Small) Vip / Per Set , Steel Tray , Sutli / Per Kg. , Tea + Biscuit , Tea Container 05 Ltrs. , Tea Container 10 Ltrs. , Tea Container 15 Ltrs. , Tea Set (Bone China) Good Quality , Tiles (Grade - 1) , Tissu Paper , Tissu Paper For Toilet , Towelgood Quality Standard Size , Towelgood Quality 24 (Suparior Quality) , Towelgood Quality 24 (Good Quality) , Towelgood Quality 24 (Best Quality) , Towelgood Quality 72 (Suparior Quality) , Towelgood Quality 72(Good Quality) , Towelgood Quality 72(Best Quality) , Transparent Table Cloth Per Mtr. , Umbrella Big Size , Umbrella Standard Size , Wall Mounted Digital Thermometer , Water Glass 06 Pcs. Set (Best Quality) , Water Glass 06 Pcs. Set (Normal Quality) , Water Bottle (1 Ltr.) , Water Bottle (500 Ml.) , Water Bottle (250 Ml.) , White Table Cloth (Cotton) Per Mtr. , Furniture (Steel) / Per Sqft. , Furniture (Iron) / Per Sqft. , Wrist Band , Water Drum (20 Ltrs) , Tarpaulin Covering / Per Sqft. , Duster For White Board , Hiring Charges Of Ceilling Fan With Fitting / Per Fan, Per Day , Hiring Charges Of Pedestal Fan With Fitting / Per Fan, Per Day , Hiring Charges Of Jhar Fan With Fitting (28) Dia. / Per Set, Per Day , Hiring Charges Of Tulu Pumpwith Fittings. / Per Pump, Per Day , Hiring Charges Of Tube Light / Per Tube Light, Per Day , Hiring Charges Of Metal Light / Per Metal / Per Day , Tv Hairing / Per Tv, Per Day , Hairing Chair / Per Chair, Per Day , Hiring Executive Chair / Per Chair, Per Day , Hiring Table / Per Table, Per Day , Hiring Cooler Machine / Per Cooler, Per Day , Hiring Heater / Per Heater, Per Day , Ac Machine Hiring / Per Ac, Per Day , Boil Egg (01 Pc.) , Cake (01 Pc.) , Banana (01 Pcs.) , Sweets-(01 Pc.) , Snacks , Vip Chair Hiring / Per Chair, Per Day , Computer Table (Single) , Computer Table (Dubble) , Iron Cot Repairing Including Painting , Ply Green Panelling In Wall Per Sqft. , Ply Normal Panelling In Wall Per Sqft. , Falls Ceiling With Fitting And Painting Per Sqft. , Temporary Wooden Furniture Work Per Sqft. , Floor With Verified Tiles With Fitting Per Sqft. , Wooden Door With Brass Lock And Handle Per Sqft. , Aluminium Frame Fitted With Glass Door (5 X 2) , Aluminium Frame Fitted With Glass Window(4 X 3) For Each Window , Wooden Book Self (6 X 3) (Good Quality Wood) Per Sqft. , Glass For Centre Table Per Sqft. , Ply Wardrobes (Normal Quality)/ Per Sqft. , Ply Wardrobes (Best Quality)/ Per Sqft. , Wooden Wardrobes (Normal Quality Wood)/ Per Sqft. , Wooden Wardrobes (Best Quality Wood)/ Per Sqft. , To Make New Ceiling By Ply Board Without Frame Works With Labour Charges Per Sqft. , Wooden Door Repair Per Sqft. , Floor Mat , Sanitizer , Oxygen Cylinder 14 Ltrs , C.C.T.V. Camera , 8 Ch Nvr , 16 Ch Nvr , 32 Ch Nvr , Ip 4Mp Bullet , 16Ch K2 Accusens Network Video Corder (Nvr), 2 Sata Upto 8Mp Supproted , Cat -6 Lan Cable / Per Mtr. , Ip Network 50Mtr Bullet Camera , Ip Network 4Mp Accusen Bullet Camera , Ip Network 4Mp Accusen Dome Camera , Midea Converter (Mc) , Poe 4 Port , Poe 8 Port , Ip 4Mp Dome , Wiring And Installation Charge / Per Cctv Camera , Dvr Lock Box , C.C.T.V. Cable & Wire / Per Camera, Per Mtr. , Coaxialcable / Per Mtr. , C.C.T.V. Connector , Digital Video Recorder , Dc Power Cable / Per Mtr. , Video Baluns , Security Camera Microphone , C.C.T.V. Video Multiplexers , Wireless Video Transmitters , Security Camera Lens , Siamese Cable / Per Mtr. , Patch Cord , Installation Of Cctv Camera / Per Camera , 4 Port , Adapter (12 V 2 Amp) , Adapter (05 V 2 Amp) , Optic Fiber , Joint Box , Electric Socket , Pvc Box 4 X 4 , Pvc Box 5 X 5 , P.O.E. Box , Telephone Receiver (With Truecaller) , Telephone Receiver (Without Truecaller) , Telephone Receiver Color Id (Normal Quality) , Telephone Receiver Color Id (Best Quality) , Set Top Box-Digital/Hd With Recoding-1 Yrs. Package With Full Channals , Dish Tv Monthly Recharge , Jio Fiber Monthly Recharge , Mobile Phone-Android With Gps Facility With Camera , Steel Almirah (Big Size) 78”X36”X22” , Steel Almirah (Medium Size) 60”X36”X20” , Book Self (78”X36”X22”) Wooden / Per Sqft , Book Self (78”X36”X22”) Steel / Per Sqft. , Filing Cabinet (60”X36”X20”) , Steel Rack (45X61X22) / Per Sqft. , Steel Table With Glass Top (Six Sitter) , Steel Table With Glass Top (Four Sitter) , Executive Table Wooden (Segun Wood)- Wood Per Sqft. , Executive Table Wooden (Akashmoni Wood)- Wood Per Sqft. , Executive Table Wooden (Grass Board)- Per Sqft. , Wooden Table (Segun Wood) Per Sqft. , Wooden Table (Normal Wood) Per Sqft. , Wooden Rack (Best Quality Wood) Per Sqft. , Wooden Rack (Normal Quality Wood) Per Sqft. , Wooden Chair With Arm (Normal Quality Wood) Per Sqft. , Wooden Chair With Arm (Best Quality Wood) Per Sqft. , Wooden Normal Chair (Best Quality Wood) , Wooden Normal Chair (Normal Quality Wood) , Steel Chair , Plastic Chair With Arm , Plastic Chair Without Arm , Executive Chair (Big Size) , Executive Chair (Small Size) , Revolving Chair , Computer Chair , Computer Chair (Without Arm) , Fiber Chair (Without Arm) , Fiber Chair With Kushan (With Arm) , Fiber Table , Wooden Tool / Per Sqft. , Wooden Back Bench (Sisu Wood) Per Sqft. , Wooden Back Bench (Good Quality Wood) Per Sqft. , Fiber Tool , Table Glass (5 Mm/ 8Mm) Per Squre Fit , Wooden Rifle Rack 10 Capacity With Single (Sal Wood) Per Sqft. , Wooden Rifle Rack 10 Capacity With Single (Sisu Wood) Per Sqft. , Wooden Rifle Rack 10 Capacity With Double (Sal Wood) Per Sqft. , Wooden Rifle Rack 10 Capacity With Double (Sisu Wood) Per Sqft. , Wooden Rifle Rack 20 Capacity With Single (Sal Wood) Per Sqft. , Wooden Rifle Rack 20 Capacity With Single (Sisu Wood) Per Sqft. , Wooden Rifle Rack 20 Capacity With Double (Sal Wood) Per Sqft. , Wooden Rifle Rack 20 Capacity With Double (Sisu Wood) Per Sqft. , Office Chair Plastic , Wooden Dining Table (Sal Wood) Per Sqft. , Wooden Dining Table (Sisu Wood) Per Sqft. , Wooden Dining Bench (Sal Wood) Per Sqft. , Wooden Dining Bench (Sisu Wood) Per Sqft. , Notice Board With Glass Per Sqft. , Steel Bench Per Sqft. , Display Board Per Sqft. , Map Board Per Sqft. , Door Mats , Wall Cabinet , Side Cabinet , Hang Mirror / Per Sqft. , Door & Window Curtain Cloth With All Accessories With Fittings & Fixing (Best Quality) Per Mtr. , Door & Window Curtain Cloth With All Accessories With Fittings & Fixing (Normal Quality) Per Mtr. , Wooden Cot (Segun Wood) Per Sqft. , Wooden Cot (Akashmoni Wood) Per Sqft. , Dressing Table (Segun Wood) Per Sqft. , Dressing Table (Akashmoni Wood) Per Sqft. , Almirah Lock Repairing , Photo Binding With Glass / Per Sqft. , Cup & Plate (Laopala Made) , Cup & Plate (Normal Quality) , Desk Calendar , Desk Calendar Stand , Drinking Glass (Normal Quality) , Drinking Glass (Best Quality) , Punching Machine Big , Punching Machine Mideum , Sealing Wax , Table Tray , Table Top , Colour Photo Print (4/6) , Colour Photo Print (5/7) , Colour Photo Print (8/10) , Colour Photo Print (8/12) , Iron Trunk / Per Sqft. , Hipping Hammer , Serch Light / Dragon Light Cherger , Sandwich Maker (Wipro) , Sandwich Maker (Prestige) , Toaster (Philips) , Toaster (Kent) , Dinner Set (Borosil) , Dinner Set (Cello) , Dinner Set (La Opala) , Wall Hanger , Hot Pot Bowl (Milton) , Hot Pot Bowl (Cello) , Table Mat , Exhaust Fan (Crompton) , Exhaust Fan (Havells) , Exhaust Fan (Bajaj) , Exhaust Fan Repairing , Desk Organiser , Tv 32 (Sony) , Tv 32 (Lg) , Tv 32 (Mi) , Tv 43 (Sony) , Tv 43(Lg) , Tv 43 (Mi) , Tv 55 (Sony) , Tv 55 (Lg) , Tv 55 (Mi) , Tv 60 (Sony) , Tv 60 (Lg) , Tv 60 (Mi) , Mobile Charger , Furniture Painting / Sqft. , Green Tea (Per 100 Gm) , Coffee (Per 100 Gm.) , Darjelling Tea (Per 100 Gm.) , Biscuit (Per Pkt.) , Sugar Cube (Per Pkt.) , Rice (Tulai Panji) / Per Kg. , Rice (Sova) Per Kg. , Dal Per Kg. , Fish Per Pc. , Vaja / Per Pkt. , Chatni / Per Pkt. , Sweets / Per Pc. , Books , Bicycle , Broad Band Connection + Installation + Monthly Package , Wooden High Bench (Sal Wood) Per Sqft. , Wooden High Bench (Sisu Wood) Per Sqft. , Wooden High Bench (Normal Wood) Per Sqft. , Wooden Low Bench (Sal Wood) Per Sqft. , Wooden Low Bench (Sisu Wood) Per Sqft. , Wooden Low Bench (Normal Wood) Per Sqft. , Ash Tray , Microtek Intel Pure Sine Wave 1625 W E2+ Inverter With 150 Amp It 500(Exide) Battery & Trolley , Microtek Intel Pure Sine Wave 1625 W E2 Repairing , Microtek 1825 E2 Sine Wave Inverter With 02 No. 150 Amp It 500(Exide) Battery & Trolley , Microtek 1825 E2 Sine Wave Inverterrepairing , Microtek 1225 E2 Inverter With 01 No. 150 Amp It 500(Exide) Battery & Trolley , Microtek 1225 E2 Inverter Repairing , Invatubllar Battery 150 Amp It 500(Exide) , Microtek E2 + 1625 Va Sine Wave Ups Fy 1813 Inverter Repairing , Inverter Trolley , Gastifier Stove , Repair Of Gastifier Stove , Chapatti Vati Machine , Repair Of Chapatti Vati Machine , Wooden Table & Rack Per Sqft. , Ornate Chair , Jute Sack , Target Paper , Figure 11 , Furniture Repairing With Painting (Per Sqft.) , Sprite Polish & Colour Of Wooden Door (Per Sqft.) , Sprite Polish & Colour Of Wooden Window (Per Sqft.) , Sprite Polish & Colour Of Wooden Furniture (Per Sqft.) , Polishing & Colouring Of Steel Furniture (Per Sqft.) , Sprite Polishing & Colouring Of Wooden Furniture (Per Sqft.) , Wall Calendar Printing , Sofa Set One Sitter , Sofa Set Three Sitter , Centre Table Wooden With Glass Fitting Per Sqft. , Centre Table , Kitchen Chimney (Kutchina) , Kitchen Chimney (Jaypan) , Microwave (Whirlpool) , Microwave (Lg) , Micro Plate/ Bowl , Refrigerator (Haier) , Refrigerator (Lg) , Refrigerator (Whirlpool) , Refrigerator Servicing And Gas Filling , Refrigerator Compresser Change , Hooter , Steel Buffet , Buffet Gel , Iron Floor And Desk Stand , Pbx Machine , Table Calendar , Metal Key Chain , Tissue Paper Holder , Juicer (Bajaj) , Juicer (Havells) , Video Camera Sony (Best Quality) , Video Camera Sony (Normal Quality) , Breath Analyzer , Hand Towel (Superior Quality) , Hand Towel (Best Quality) , Hand Towel (Good Quality) , Saxophone , Clarinet , Trumpet , Euphonium , Euphonium Spring , Big Drum , Side Drum , Side Drum Synthetic , Bugler , Bugler Mouth Piece , Trumpet Mouth Piece , Euphonium Mouth Piece , Bugle Siling , Trumpet Spring , Big Drum Synthetic , Big Drum Biter , Big Drum Siling , Side Drum Stick , Side Drum Siling , Clarinet Bob , Saxophone Bob , Pipe Rid , Chanter Rid , Leather , Wax / Per Kg. , Big Drum Belt , Tener Drum Biter , Tener Drum Belt , Pipe Don , Lerniar , Solder Cover , Batch , Belt , Shall , Beret Cap , Crown , Pipe Chanter , Practice Chanter , Saxophone Repair , Clarinet Repair , Trumpet Repair , Euphonium Repair , Dress For Brass Band , Dress For Pipe Band , Saxophone Rid , Saxophone Mouth Pice , Clarinet Mouth Pice , Side Drum Spring , Tie , Leather Cover , Flue Pipe , Pipe Cord , Pipe Master Stick , Brass Master Stick , Officer’S Cap , Saxophone Box , Saxophone Neck Strip , Clarinet Box , Trumpet Box , Cloth For Coat/ Summer Coat Per Mtr. , Cloth For Pant Per Mtr. , Pipe Lather Cover , Pipe Ribbon , Pipe Flag , Pipe Mouth Piece , Clarinet Notation Stand , Trumpet Notation Stand , Saxophone Notation Stand , Music Manuscript Book , Shirish Paper / Per Pc. , Activated Carbon , Gravels Stone , Mno2 , Treated Sand , Anthracite , Clorin , Anti Scelent Chemicals , Add Minerals , Sodium Bicarbonate , 5 Micron Jambu Filter , Dosing Pump Pipe / Per Mtr. , Back Wash Valve , Multiport Valve , Uv System , Ro Membren (250Lph) , Chemical For Washing , Citric Acid , High Pressure Pump (Cri) , Raw Water Pump , Pressure Metre , Flow Metre , Vessel , Lesser Pipe , Jambu Filter , Jambu Cartage , Dosing Pump , Electric Panel , 1 Hp Raw Pump , Pipe Fitting , Meneral Powder , Silex , Condenser Ac Machine , Fan For Ac Machine , A.C Machine Servicing And Gas Filling , Copper Pipe (A.C. Machine) / Per Mtr. , Circuit Change (A.C. Machine) , Sensor (A.C. Machine) , Jona Dohar Double (Best Quality) , Jona Dohar Double (Normal Quality) , Jona Dohar Single (Best Quality) , Jona Dohar Single (Normal Quality) , Small Hand Towel ( Superior Quality) , Small Hand Towel (Best Quality) , Small Hand Towel (Good Quality) , Blanket Double (Best Quality) , Blanket Double (Nomal Quality) , Blanket Single (Best Quality) , Blanket Single (Nomal Quality) , Mattress (6’X7’) , Mattress (5’X6’) , Mattress (4’X6’) , Bracket For Curtain , Still Pipe For Curtain /Per Mtr. , Rent Of Cctv Camera Per Camera Per Day , Vacuum Cleaner (Philips) , Vacuum Cleaner (Eureka) , Tea Table (Steel) , Wire Clip / Per Set , Elastic / Per Mtr. , Sofa Cover , Switch 6 Amp , Hanger , Table Lamp , Small Towel (For Pillow) , Microwave Oven , Geyser (10 Ltr.) , Geyser (5 Ltr.) , Roti Maker Machine , Roti Maker Machine Repairing , Big Size Towel (Superior Quality) , Big Size Towel (Best Quality) , Big Size Towel (Good Quality) , Distilled Water / Per Ltr. , Dress Cord , 12 Mm. Ply Furniture With Sunmica With Fitting And Fixing Per Sqft. , 18 Mm. Ply Furniture With Sunmica With Fitting And Fixing Per Sqft. , 12 Mm. Ply Furniture With Sunmica With Colouring Per Sqft. , 18 Mm. Ply Furniture With Sunmica With Colouring Per Sqft. , Moulded Dining Table , Table Calendar Printing , Wall Calendar , Table Calendar , Window Glass Change Per Sqft. , Steel Window Repair Ser Sqft. , Wooden Window Repair Normal Wood Per Sqft. , Wooden Windowa Repairing With Painting Best Wood Per Sqft. , Wooden Door Frame Change Best Wood Per Sqft. , Wooden Window Frame Change Normal Wood Per Sqft. , Wooden Door Making Best Wood (Segun) Per Sqft. , Wooden Door Making Best Wood (Normal Wood) Per Sqft. , Wooden Window Making (Segun) Per Sqft. , Wooden Window Making (Normal Wood) Per Sqft. , Cnadle Stand (A. Large/ B. Medium) , Magazine Stamping , Star Plate For Vehicle (Per Star) , Glow Sign Board Printing On Synthetic Cloth (Per Sqft.) , Steel Almirah (Small) , Hiring Of Centre Table , Hiring Of Sofa Set (A. 3 Seater/ B. 1 Seater) Per Day , Air Fryer (Best Company Best Model) , Air Fryer (Good Company Good Model) , D.S.C. , Normal Painting Of Wooden Window Per Sqft. , Normal Painting Of Wooden Door Per Sqft. , Fiber Join , Exide Invatubular It950, 12V 260Ah Tall Tubular Inverter Battery , Flower Vase 22 (Bone China) , Wall Mount Fan (Orient) , Wall Mount Fan (Havells) , Wall Mount Fan (Crompton) , Tooth Pest (Good Quality) , Tooth Pest (Best Quality) , Tooth Brush (Good Quality) , Tooth Brush (Best Quality) , Tub (Plastic) , Mug (Plastic) , Hair Oil (Best Quality) , Hair Oil (Good Quality) , Mustered Oil Per Kg. , Bath Room Seeper (Best Quality) , Water Carrier Tin , Wooden Colour (Good Quality) Per Ltr. , Wooden Colour (Best Quality) Per Ltr. , Woodn Primer Per Ltr. , Metal Colour (Good Quality) Per Ltr. , Metal Colour (Best Quality) Per Ltr. , Metal Primer Per Ltr. , Weather Coat (Good Quality) Per Ltr. , Weather Coat (Best Quality) Per Ltr. , Wall Primer Per Ltr. , Wall Putti Per Kg. , Cement (Good Quality) Per Bag , Cement (Best Quality) Per Bag , Whight Cement Per Bag , Sand Per Cft. (Balason) , Stone Chip 1/2 Per Cft (Muraroi) , Stone Chip 1/2 Per Cft. , Stone Chip 3/4 Per Cft , Stone Chip 5/8 Per Cft , Colouring Tin (Tata Make) Per Pc. , Tarkata Per Kg. , Coconut Rope Per Kg. , Bamboo / Per Pc. , Iron Rod 6Mm (Tata) / Per Pc. , Iron Rod 8Mm (Tata) / Per Pc. , Iron Rod 10Mm (Tata) / Per Pc. , Iron Rod 12Mm (Tata) / Per Pc. , Iron Rod 16Mm (Tata) / Per Pc. , Fax Machine Repair , Iron Rod 25Mm (Tata) / Per Pc. , Treadmill (Electric) , Treadmill (Non-Electric) , Treadmill Repairing / Servicing , Printer Tonner Rifilling , Printer Tonner Rifilling With Drum Change , Xerox Machine Repairing , Paper /File Maintenance Software With 2 Years Maintenance , Typing Software With 2 Years Mainantence , Fax Machine Repair , Fax Machine , Xerox Machine Tonner , Xerox Machine Tonner (Canon- Image Runner 2004) , Computer Items , 1Kva Online Microtek Ups 24Vdc-Ib , 3.5 Audio Aux Cable Ranz 1.5 M , 3.5 Male Female Cable Kensonic 1.5 M , 3D Sticker For Laptop , 3 In 1 Type-C Usb Hub , 4G Router Lapcare 4 Antena (W123) Lkio4a8341 , 8 In 1 Type-C Usb Hub , Acer Monitor 22 Fhd Non Ips , Adapter 5V 2A Ranz , Adapter Acer 65W 19V 3.42 Amp , Adapter Dvm 19V-0.84Amp , Adapter Dvm 24V 3A , Adapter Lapcare 12V 1A 2.1 , Adapter Lapcare 12V 2A 2In1 , Adapter Lapcare 12V 5Amp (8368) , Adapter Laptop Acer 45W , Adapter Laptop Acer 45W 19V Org , Adapter Laptop Asus 40W , Adapter Laptop Asus 45W , Adapter Laptop Asus 65W , Adapter Laptop Dell 180W (47Rw6/2N6c5) , Adapter Laptop Dell 45W , Adapter Laptop Dell 65W , Adapter Laptop Dell 90W 5Gt3k , Adapter Laptop Frontech Lap-0003 65W , Adapter Laptop Hp 65W 4.5Mm , Adapter Laptop Hp 65W 7.4Mm , Adapter Laptop Lapcare , Adapter Laptop Lapcare 65W/61W Type-C , Adapter Laptop Lapcare 90W - 19V , Adapter Laptop Lapcare Asus 19V. 45W , Adapter Laptop Lapcare For Asus 45W , Adapter Laptop Lapcare For Asus Mini Usb , Adapter Laptop Lapcare For Dell 45W , Adapter Laptop Lapcare For Dell 65W , Adapter Laptop Lapcare For Hp 65W , Adapter Laptop Lapcare For Hp 90W , Adapter Laptop Lapcare For Lenovo 45W , Adapter Laptop Lapcare For Lenovo 65W , Adapter Laptop Lapcare For Toshiba , Adapter Laptop Lapcare Hp 65W , Adapter Laptop Lapcare Toshiba 65W , Adapter Laptop Lapcare Universal 65W Type-C , Adapter Laptop Lapgrade , Adapter Laptop Lenovo 45W , Adapter Laptop Lenovo 65W , Adapter Laptop Lenovo 90W Org Big Pin , Adapter Original Ngxgold , Adapter Ranz 12V 3A 36W , Adapter Ranz 14V 2.14A 30W , Adapter Ranz 19V 2.1A 40W , Adapter Ranz 9V 1A 2.1 , Adapter Zentek 5V 1Amp 2In1 , Antivirus Bitdefender Total Security 1Pc 2Y , Antivirus Escan 1Pc 1Y , Antivirus K7 Total Security 1Pc 1Y , Antivirus Quickheal I/S 10Pc 1Y , Antivirus Quickheal I/S 1Pc 1Y , Antivirus Quickheal I/S 3Pc 3Y , Antivirus Quickheal I/S Upg 1Pc 3Y , Antivirus Quickheal Pro 10Pc 1Y , Antivirus Quickheal Pro 1Pc 1Y , Antivirus Quickheal Pro 1Pc 3Y , Antivirus Quickheal Pro 2Pc 3Y , Antivirus Quickheal Pro 3Pc 1Y , Antivirus Quickheal Pro Upgrade 1Pc 1Y , Antivirus Quickheal Pro Upgrade 1Pc 3Y , Antivirus Quickheal Total Security 10Pc 1Y , Antivirus Quickheal Total Security 1Pc 1Y , Antivirus Quickheal Total Security 1Pc 3Y , Antivirus Quickheal Total Security 2Pc 1Y , Antivirus Quickheal Total Security 2Pc 3Y , Antivirus Quickheal Total Security 3Pc 1Y , Antivirus Quick Heal Total Security 3Pc 3Y , Antivirus Quickheal Total Security 5Pc 1Y , Antivirus Quickheal Total Security 5Pc 3Y , Antivirus Quickheal Total Security Upgrade 1Pc 1Y , Antivirus Quickheal Total Security Upgrade 1Pc 3Y , Antivirus Quickheal T/S 10Pc 3 Years , Antivirus Quickheal T/S Festival 1Pc 1Y , Antivirus Wardwiz Essential 1Pc 1Y , Anycast M9 Plus , Asus All-In-One A3202wba-Wpb002w , Asus Rog Ally Handheld Gaming Console Rc71l-Nh001w , Asus Rog Strixg614jv-N3474ws , Asus Vivobook 14 Flip Tp3402vab-Lz541ws , Asus Vivo Book X1500ka-Ej021w , Audio Converter 2In1 , Audio Receiver Frontech Jil-0824 , Audio Receiver Iball , Av To Hdmi , Backpack Acer Mrp1999 , Backpack Asus Ap1600 , Backpack Asus Ap4600 , Backpack Asus Bp1504 , Backpack Asus Mrp2999 , Backpack Asus Tuf Bpvp5700 , Backpack Dell Mrp1999 , Backpack Dell Mrp2999 , Backpack Hp Mrp 1499 , Backpack Hp Mrp1999 , Backpack Hp Mrp2399 , Backpack Hp Prime , Backpack Lenovo Legion Mrp7490 , Backpack Lenovo Mrp1999 , Backpack Lenovo Mrp2999 , Backpack Police , Backpack Toshiba , Barcode Roll 105Mmx300m , Barcode Scanner Tvs Bs-C101 Star , Barcode Scanner Tvs Bs-C103g , Barcode Scanner Tvs Bs-L150s Wl , Battery 2032 Dura Cell , Battery Laptop Acer As16a5k-4S1p , Battery Laptop Apple A2337 , Battery Laptop Asus Original , Battery Laptop Avita Oem , Battery Laptop Dell Original , Battery Laptop Hp Hs04 , Battery Laptop Hp Ht03xl , Battery Laptop Hp Original , Battery Laptop Lapcare Dell 3451 (6120) , Battery Laptop Lapcare Dv2000 , Battery Laptop Lapcare E6400 (2156) , Battery Laptop Lapcare Hp 4320S/4520S (2622) , Battery Laptop Lapcare Hp 6700B/6500B , Battery Laptop Lapcare Hp Cq42 (2101) , Battery Laptop Lapcare Hp Vi04 (5313) , Battery Laptop Lapcare Hs04 , Battery Laptop Lapcare Ht03xl , Battery Laptop Lapcare Jc04 , Battery Laptop Lapcare L16l2pb2 , Battery Laptop Lapcare L600 (3205) , Battery Laptop Lapcare Lenovo G430/G530 , Battery Laptop Lapcare Oa04 , Battery Laptop Lapcare Oa04 (5115) , Battery Laptop Lapgrade For Hp Cq32/42/62 3116 , Battery Laptop Lapgrade Lenovo G400/G500 4397 , Battery Laptop Lapgrade Lenovo G460 , Battery Laptop Lapgrade Lenovo Y480 , Battery Laptop Lenovo Original X240 , Battery Lithium Mb 2032 , Battery Ups Frontech , Battery Ups Intex , Battery Ups Microtek , Bluetooth Speaker Coco Sports Billy , Bluetooth Speaker Coco Sports Rockey Evs01 , Bluetooth Speaker Coco Sports Sandy , Boat Bassheads 900 Pro , Boat Rockerz 370 Pro , Boat Rockerz 400 Pro , Boat Rockerz 425 , Boat Rockerz 450 , Boat Rockerz 450 Pro , Boat Rockerz 460 , Boat Rockerz 550 , Boat Rockerz 650 Dc Crusade , Boya Wired Condenser Karaoke Mic , Cabinet Clarion Jm-Kraft Wh , Cabinet Coco Sports Gaming Rgb Nova 110 Black , Cabinet Coco Sports Gaming Rgb Nova 220 White , Cabinet Coco Sports Rampage Elite Black , Cabinet Coco Sports Rampage Elite White , Cabinet Cooler Master 310C , Cabinet Frontech Arcadia (G) , Cabinet Frontech Candy (G) , Cabinet Frontech Case And (G) , Cabinet Frontech Fiera , Cabinet Frontech Ft-4285 Xylo , Cabinet Frontech Ft-4285 Xylo White , Cabinet Frontech Inferno (G) , Cabinet Frontech Mystic (G) , Cabinet Frontech Nico , Cabinet Frontech Phantom White (G) , Cabinet Frontech Rift (G) , Cabinet Frontech Snowy (G) , Cabinet Frontech Tower , Cabinet With Smps Intex P4 It-1710 , Cabinet Zebronics Gaming Iceberg (White) , Cabinet Zebronics Gaming Invicta , Cabinet Zebronics Gaming Iron Side , Cable Hdmi 5M , Cable Hdmi To Dvi 1.5M Ranz , Cable Hdmi To Vga 1.8M Ranz , Cable Mantra Ranz , Cable Mantra Ranz Premium , Cable Morpho Ranz , Cable Morpho Ranz Premium , Cable Ranz Type C Totype C , Cable Sata Y Spliter , Cable Type-C To Hdmi 1.8 Mtr. , Cable Type-C Usb Mi Black , Camera To-Link Wifi/Tilt Tc70 Tapo , Canon G2020 Maintanance Box , Car Charger 150W Lapcare , Card Reader Multiranz , Cartridge Epson Fx890 , Cartridge Epson Plq20 Original , Cartridge Spink Lq-310 , Cartridge Tvs Ribbon 80C , Charger With Cable Mi 2A Fast , Chasis Fan Tag 120Mm , Cleaning Kit Ranz Rz-1016 , Cleaning Kit Smart Pro Sp-Lc-001 , Comforter Ackross Floralwhisper Double , Computer Tool Kit 6011-A , Computer Tool Kit Maxicom 8In1 , Computer Tool Kit Maxicom M325 32In1 , Converter Hdmi Male Female Ranz , Converter Ranz Hdmi To Vga , Converter Ranz Type C To Vga , Converter Usb To Hdmi , Converter Vga To Hdmi , Cooler Ant Esports Ice C612 Digital , Cooling Pad Laptop Coco Sports Flow11 , Cooling Pad Laptop Coco Sports Flow12 , Cooling Pad Laptop Coco Sports Flow13 , Cooling Pad Laptop Coco Sports Flow14 , Cooling Pad Laptop Coco Sports Flow15 , Cooling Pad Laptop Coco Sports Flow16 , Cooling Pad Zeb Nc3300 , Cooling Pad Zeb Nc7000 , Cooling Pad Zeb Nc9000 , Cooling Pad Zebronics Nc2100 , Cpu Amd Ryzen 3 3200G , Cpu Amd Ryzen 5 3400G , Cpu Amd Ryzen 5 3600 Tray , Cpu Amd Ryzen 5 4600G , Cpu Amd Ryzen 5 5500 , Cpu Amd Ryzen 5 5600 , Cpu Amd Ryzen 5 5600G , Cpu Amd Ryzen 5 5600Gt , Cpu Amd Ryzen 7 5700 , Cpu Amd Ryzen 7 5700X , Cpu Amd Ryzen 7 8700F , Cpu Amd Ryzen 7 Without Cooler 5700X , Cpu Amd Ryzen 7 Without Cooler 5800X , Cpu Amd Ryzen 9 9900X , Cpu Cooling Fan Cooler Master 240L Core Argb , Cpu Cooling Fan Cooler Master Hyper 212 Spectrum V3 , Cpu Fan 478 Socket , Cpu Fan 775 & 1155 Combo Frontech , Cpu Fan Cooler Master Hyper T20 , Cpu Fan Lapcare Venus , Cpu I3 3Rd Gen , Cpu I3 4Th Gen , Cpu I5 3Rd Gen , Cpu I5 4Th Gen , Cpu I5 6Th Gen , Cpu I7 12Gen 12700K , Cpu Intel I3-10105 Lga1200 , Cpu Intel I3 12100F , Cpu Intel I3-12100 Lga1700 , Cpu Intel I5-11400 Lga1200 , Cpu Intel I5-12400F , Cpu Intel I5-12400 Lga 1700 , Cpu Intel I5-9500 , Cpu Intel I7 12700 , Cpu Intel I7 8700T , Crimping Tool , Crimping Tool 3In 1 , Dell 3511 Laptop Panel Abh , Desktop Hp Slim S01-Pf2888in , Desktop Power Cable 1.5M , Desktop Power Cable Ranz1.5M , Desktop Power Cable Ranz 5M , Desktop Power Extention 1.5M , Dotmatrix Printer Cable Ranz 1.5M , Dp Cable Orginal 1.5M , Dp Cable Ranz 1.5M , Dp To Hdmi Cable 1.8 Mtr. , Dp To Hdmi Converter , Dp To Hdmi Converter Ranz , Dp To Vga Converter Ranz , Drum 56A/K2200 , Drum Unit 104A , Drum Unit 19A , Dvd Frontech , Dvd Rw Drive Asus 8X Lite External , Dvi Cable Original 1.5M , Electric Blower Machine Ranz , Electric Blower Machine Ranz Gold , Encoder Strip Gt5810/20 , Epson Maintanance Box , Fan Cpu Ranz , Fan Intel 1155 , Fan Intel Original 1155 , Fan Ranz Q50 , Finger Print Mantra Mfs 100 , Finger Print Mantra Mfs 110 , Formatter & Logic Card 1020 Original , Game Pad Ant Esports Wireless Gp400 Black , Game Pad Ant Esports Wireless Gp400 White , Graphics Card 2Gb Ddr3 Gt 610 Frontech , Graphics Card 2Gb Ddr3 Gt610 Vga Geonix , Graphics Card 4Gb Ddr3 Grp0002 , Graphics Card 4Gb Ddr3 Gt730 Frontech , Graphics Card 4Gb Ddr3 Gt740 Frontech , Graphics Card 4Gb Msi 730 , Graphics Card Asrock 4Gb Rx550 Pg , Graphics Card Asrock Rx550 4Gb Pg , Handheld Inkjet Printer 12.7Mm , Hdd 1Tb External Hv320 Adata , Hdd 1Tb External Seagate Expension , Hdd 1Tb Seagate 3.5 , Hdd 2Tb External Hd710 Pro Adata , Hdd 2Tb Seagate 3.5 , Hdd 2Tb Surveillance Seagate , Hdd 4Tb Seagate 3.5 , Hdd 500Gb Consistent Sata , Hdd 5Tb External Wd Passport , Hdd Bag Ranz Case , Hdd Cable Ranz 1M , Hdd Caddy 2.5 Ranz , Hdd Casing 3.5 Smartpro , Hdd Casing Coco Sports 2.5 Sata Usb 2.0 , Hdd Casing Ranz 2.5 Sata 2.0 , Hdd Casing Ranz 3.0 , Hdd Casing Ranz 3.5 Sata 2.0 , Hdd Sata Power Cable , Hdmi Cable 1.5 Mtr , Hdmi Cable Lapcare 1.5M , Hdmi Cable Original 1.5M , Hdmi Cable Ranz 10M , Hdmi Cable Ranz 15 Mtr , Hdmi Cable Ranz 20M , Hdmi Cable Ranz 3M , Hdmi Cable Ranz 5 Mtr , Hdmi Extension Male To Female Cable , Hdmi Splitter , Hdmi Switch 3 Port With Remote , Hdmi To Av , Hdmi To Dvi Cable Smart Pro 1.5M , Hdmi To Dvi Joiner , Headphone Frontech Gaming Hf-0011 , Headphone Hp , Headphone Logitech H340 , Headphone Ranz 808 , Ink Bank Tvs , Ink Bottle Brother 5000 Cyan , Ink Bottle Brother 5000 Magenta , Ink Bottle Brother 5000 Yellow , Ink Bottle Brother Btd60 Black , Ink Bottle Canon 71 Black , Ink Bottle Canon 71 Cyan , Ink Bottle Canon 71 Magenta , Ink Bottle Canon 71 Yellow , Ink Bottle Canon 73 Black , Ink Bottle Canon 73 Cyan , Ink Bottle Canon 73 Gray , Ink Bottle Canon 73 Magenta , Ink Bottle Canon 73 Red , Ink Bottle Canon 73 Yellow , Ink Bottle Canon 790 Black , Ink Bottle Canon 790 Cyan , Ink Bottle Canon 790 Magenta , Ink Bottle Canon 790 Yellow , Ink Bottle Epson 001 Black , Ink Bottle Epson 001 Cyan , Ink Bottle Epson 001 Magenta , Ink Bottle Epson 001 Yellow , Ink Bottle Epson 003 Black , Ink Bottle Epson 003 Cyan , Ink Bottle Epson 003 Magenta , Ink Bottle Epson 003 Yellow , Ink Bottle Epson 005 Black , Ink Bottle Epson 008 Black , Ink Bottle Epson 008 Cyan , Ink Bottle Epson 008 Magenta , Ink Bottle Epson 008 Yellow , Ink Bottle Epson 057 Black , Ink Bottle Epson 057 Cyan , Ink Bottle Epson 057 Light Cyan , Ink Bottle Epson 057 Light Magenta , Ink Bottle Epson 057 Magenta , Ink Bottle Epson 057 Yellow , Ink Bottle Epson 6641 Black , Ink Bottle Epson 6642 Cyan , Ink Bottle Epson 6643 Magenta , Ink Bottle Epson 6644 Yellow , Ink Bottle Epson 673 Black , Ink Bottle Epson 673 Cyan , Ink Bottle Epson 673 Light Cyan , Ink Bottle Epson 673 Light Magenta , Ink Bottle Epson 673 Magenta , Ink Bottle Epson 673 Yellow , Ink Bottle Epson 774 Black , Ink Bottle Epson 774 Black Mini , Ink Bottle Hp Gt52 Cyan , Ink Bottle Hp Gt52 Magenta , Ink Bottle Hp Gt52 Yellow , Ink Bottle Hp Gt53 Black , Ink Cartridge Canon 47 Black , Ink Cartridge Canon 57 Color , Ink Cartridge Canon 745 Black , Ink Cartridge Canon 746 Color , Ink Cartridge Hp 27 Black , Ink Cartridge Hp 46 Black , Ink Cartridge Hp 46 Tri Colour , Ink Cartridge Hp 678 Black , Ink Cartridge Hp 680 Black , Ink Cartridge Hp 680 Colour , Ink Cartridge Hp 682 Black , Ink Cartridge Hp 682 Tri Colour , Ink Cartridge Hp 703 Tri Color , Ink Cartridge Hp 802 Black , Ink Cartridge Hp 802 Tri Colour , Ink Cartridge Hp 803 Black , Ink Cartridge Hp 805 Black , Ink Cartridge Hp 805 Tri Colour , Iphone 13 128Gb Blue_Mlpk3hn/A , Iphone 15 128Gb Green_Mtp53hn/A , Izi/Microphone/ X Wireless System , Izi/Others/ One+ 5K Action , Izi/Others Pro Nano Drone , Izi/Others Sky Pro Sa20mp Drone , Joypad Zebronics Zeb-V260jp , Kbm Ant Esports Km540 , Kbm Cococonut Bling Wireless , Kbm Coconut Daisywireless , Kbm Coconut Poppy Wireless , Kbm Combo Wireless Lapcare Wi-201 Black , Kbm Dell Km3322w Wireless , Kbm Frontech Kb0048 Keyboard+Mouse Wired , Kbm Hp Km200 Wireless , Kbm Hp Km260 Wireless , Kbm Intex Wireless Combo (Power New) , Kbm Logitech Mk120 , Kbm Logitech Mk220 Wireless , Kbm Logitech Mk240 Wireless White , Kb+Mouse Coco Sports Wired Combo , Kb+Mouse Coco Sports Wired Fury K15+Gm15 , Kbm Usb Hp Km150 , Kbm Usb Zebronics Gaming White+Sil , Kbm Wired Combo Coco Sports Cola K33+Gm33 Black , Kbm Wired Combo Coco Sports Mango K25 , Kb Ps2 Prodot Kb 207 , Kb Usb Dell Usb Kb216 , Kb Usb Frontech Kb 0007 , Kb Usb Hp K100 , Kb Usb Lapcare E9 , Kb Usb Lapcare Lkb 399 , Kb Usb Lapcare Mini D-Lite+Blk , Kb Usblapcare Mini D-Lite Silver , Kb Usb Tvs Champ , Kb Usb Tvs Champ Plus , Kb Usb Tvs Gold Prime , Kb Wireless Lapcare Mini D-Lite+Blk , Keyboard Coco Sports Mini Gaming Virgo K21 , Keyboard Frontech Black Usb 1672 , Keyboard Frontech Gaming Combo Kb-0034 , Keyboard Frontech Gaming Combo Kb-0035 , Keyboard Frontech Gaming Combo Kb-0039 , Keyboard Frontech Gaming Combo Kb-0042 , Keyboard Frontech Gaming Kb0049 , Keyboard Frontech Kb0046 , Keyboard Hp Usb K160 , Keyboard Hp Wired Combo Km160 (99Y13aa) , Keyboard Laptop Dell , Keyboard Laptop Hp , Keyboard Laptop Lenovo 440 , Keyboard Laptop Lenovo With Power Switch , Lamination Paper65*95 Mm , Lamination Paper Excelam A4 , Lamination Roll 9 , Laminator Frontech Lam 0001 , Laminator Frontech Lam-0003 , Laminator Gobbler Type-320 , Laminator Gobbler Type-330 , Lan Cable Cat 6 Adnet 5M , Lan Cable Cat 6 Digisol 305 Mtr Blue , Lan Cable Cat 6 Digisol 305Mtr Red , Lan Cable Cat 6 Digisol 305 Mtr Yellow , Lan Cable Cat 6 Finolex 305Mtr , Lan Cable Cat 6 Microtek 305 Mtr , Lan Cable Cat 6 Ranz 10M , Lan Cable Cat 6 Ranz 10M Premium , Lan Cable Cat 6 Ranz 1.5M , Lan Cable Cat 6 Ranz 2M , Lan Cable Cat 6 Ranz 2M Premium , Lan Cable Cat 6 Ranz 305 Mtr Box , Lan Cable Cat 6 Ranz 305 Mtr Roll , Lan Cable Cat 6 Ranz 3M , Lan Cable Cat 6 Ranz 3M Premium , Lan Cable Cat 6 Ranz 5M , Lan Cable Cat 6 Ranz 5M Premium , Lan Tester Rj45 Smartpro , Laptop Acer Aspire Lite Al 15-52 , Laptop Asus Creator K3605zc-Rp587ws , Laptop Asus Creator K3605zf-Rp458ws , Laptop Asus E1404fa-Nk522ws , Laptop Asus E1504fa-Lk541ws , Laptop Asus E1504fa-Nj321ws , Laptop Asus E1504fa-Nj322ws , Laptop Asus E1504ga-Lk321ws , Laptop Asus E1504ga Nj321ws , Laptop Asus Tuf Fa506nc-Hn083w , Laptop Asus Tuf Fa506nf-Hn578w , Laptop Asus Tuf Fa507nur-Lp082w , Laptop Asus Tuf Fa566nc-Hn083ws , Laptop Asus Tuf Fa566ncr-Hn054ws , Laptop Asus Tuf Fa566nfr-Hn045ws , Laptop Asus Tuf Fx507zc4-Hn116w , Laptop Asus Tuf Fx577zc-Hn192ws , Laptop Asus Vivobook X1500ea-Ej122ws , Laptop Asus Vivobook X1504za-Nj321ws , Laptop Asus Vivobook X1504za-Nj322ws , Laptop Asus X1504va-Nj320ws , Laptop Asus X1504va-Nj522ws , Laptop Asus X1504va-Nj540ws , Laptop Asus X1504za-Nj342ws , Laptop Asus X1504za-Nj520ws , Laptop Asus X1504za-Nj542ws , Laptop Asus X1605zac-Mb540ws , Laptop Asus X1605zac-Mb741ws , Laptop Dell Inspiron 3525 Oin35255271rins1 , Laptop Dell Inspiron In3535hf8x1003orb1 , Laptop Dell Inspiron Oin352010031rinb1m , Laptop Dell Inspiron Oin352010031rins1m , Laptop Dell Inspiron Oin352010091rins1m , Laptop Hp 14S-Dq5138tu , Laptop Hp 15-Fc0026au , Laptop Hp 15-Fc0154au , Laptop Hp 15-Fc0155au , Laptop Hp 15-Fd0061tu , Laptop Hp 15-Fd0070tu , Laptop Hp 15-Fd0186tu , Laptop Hp 15S-Fq5327tu , Laptop Hp Pav X360 Laptop 14-Ek2033tu , Laptop Hp Victus Gaming 15-Fa1317tx , Laptop Hp Victus Gaming 15-Fa1414tx , Laptop Keyboard Guard , Laptop Lamination Ranz , Laptop Lenovo 82R400bgin , Laptop Lenovo 82Rj00fuin , Laptop Lenovo 82Yua017in , Laptop Lenovo 83Eq005tin , Laptop Lenovo 83Gs008sin , Laptop Power Cable Premium 1.5 Mtr , Laptop Power Cable Ranz 1.5M , Laptop Screenguard , Laptop Screen Guard Ranz 3 In 1 , Laptop Screen Protector Ranz , Laptop Stand Ranz Cfb , Liquid Cooler Ant Esports Ice Chroma 240Argb Black , Liquid Cooler Ant Esports Ice Chroma 240Argb White , Logitech Presenter W/L R400 , Mb Asus Prime A520m-K , Mb Asus Prime H610m-Cs D4 , Mb Frontech Ft-0460 H55 , Mb Frontech Ft-0470 H61 , Mb Frontech Ft-0471 H81 , Mb Frontech Ft-0486 B250 , Mb Frontech H110 Jil-0475 , Mb Geonix Gx-H61 D3 , Mb Geonix H81 With Nvme Slot , Mb Gigabyte B450m K , Mb Gigabyte B550m K , Mb Gigabyte Ga-H310m-M.2 2.0 , Mb Lapcare H61 With Nvme Slot , Mb Msi H510m-A Pro , Mb Msi H510m-B Pro , Mb Zebronics H61 (Zeb-H61nvme) , Mic Frontech Hf-0009 , Microphone Sonilex , Mic Zeb Lucid Pro , Mic Zeb Lucid Rgb , Mi Earphone Basic Blue (Vn) , Mi Earphone Basis Black (Vn) , Monitor Benq 24 Gw2490 , Monitor Benq 27 Gw2790 , Monitor Benq 27 Gw2790q Black , Monitor Dell D2020h , Monitor Frontech Mon-0022 22.0 Led , Monitor Frontech Mon0061 18.5 Led , Monitor Frontech Mon -0070 22 Led (G) , Monitor Frontech Mon0071 19 , Monitor Frontech Mon0072c 24 Curved (G) , Monitor Frontech Mon00790 22 Curved (G) , Monitor Frontech Mon0088 24 Curved Fhd (G) , Monitor Hp 21.5 V22v , Monitor Hp V20 19.5 , Monitor Samsung 24 Ls24c366eawxxl , Monitor Viewsonic Va1903h-2 18.5 , Monitor Viewsonic Va2215-Mh 22 , Monitor Viewsonic Va2432-H-W 24 , Monitor Viewsonic Va2432-Mh 24 , Monitor Viewsonic Va2732-Mh 27 , Monitor Viewsonic Va3209-Mh 32 , Monitor Viewsonic Vx2758a-2K-Pro-2 , Monitor Viewsonic Vx2779-Hd-Pro 27 , Morpho E3 1300 Rdl1 , Mouse Pad Big Gaming X88 , Mouse Pad Big Shortcut Key , Mouse Pad Comfort , Mouse Pad Comfort Gel , Mouse Pad Dell , Mouse Pad (Git New) , Mouse Pad Led-01 Rgb , Mouse Pad Logilily , Mouse Pad Logitech , Mouse Pad (Ol Git) , Mouse Pad Pubg , Mouse Pad Q6 , Mouse Pad Ranz , Mouse Pad Rog , Mouse Usb Dell Ms116 , Mouse Usb Frontech Gaming Ms 0082 , Mouse Usb Frontech Ms0064 , Mouse Usb Frontech Ms 0066 , Mouse Usb Frontech Ms0067 , Mouse Usb Frontech Ms0068 , Mouse Usb Hp M050 , Mouse Usb Hp M10 , Mouse Usb Iball Style36 , Mouse Usb Intex Eco 8 , Mouse Usb Lapcare L70+ , Mouse Usb Logitech M90 , Mouse Wireless Asus Md100 , Mouse Wireless Clarion Jm Wm 209 , Mouse Wireless Coco Sports Bluetooth Glory , Mouse Wireless Dell Wm118 , Mouse Wireless Foxin Fwm 9099 , Mouse Wireless Frontech Ms 0033 , Mouse Wireless Frontech Ms 0040 , Mouse Wireless Hp M120 , Mouse Wireless Lenovo 130 , Mouse Wireless Logitech M170 , Multybyte Adapter 5V 2A , Note Counting Machine Gobbler Gb-3288E , Note Counting Machine Gobbler Gb-5288 , Note Counting Machine Gobbler Gb-9788 E , Oppo A3x Ocean Blue (4+64Gb) , Oppo A3x Starry Purple (4+64Gb) 5G , Otg Type C Female Usb Male 2.0 , Otg Type C Female Usb Male 3.0 , Otg Usb Type C Ranz , Paper Canon A4 70Gsm , Paper Photo A4 , Paper Roll 57Mm A3 , Paper Thermal Rolll 79Mm 3 , Pci Express Adaptor Tl-Wn781n 150Mbps , Pci Express Usb Card Smacc , Pci Express W/L Adapter Tp-Link Tl-Wn881nd , Pci Parallel Card S-Tech , Pci Serial Card Enter , Pci Sound Card Enter , Pci Usb Card 2.0 Enter , Pcp Carriage 5810 , Pen Drive 128Gb Hp 3.0 X796w , Pen Drive 128Gb Sandisk 2.0 , Pen Drive 32Gb Hp 2.0 V236w , Pen Drive 32Gb Sandisk 2.0 , Pen Drive 32Gb Sandisk 3.0 Otg , Pen Drive 64Gb Hp 2.0 V236w , Pen Drive 64Gb Sandisk 2.0 , Pendrive Kingstone Data Traveler Exodia 256Gb , Pendrive Kingstone Data Traveler Exodia 64 Gb , Photo Paper A4 Kodak , Portable Microphone Single K8 , Portable Microphone Single K9 , Pos Service Fee , Power Cable 2 Pin , Power Cable Laptop Dell Original , Power Cord Laptop Ranz , Precision Pb1000 L1 Device , Precision Pb510 , Printer Cable Lapcare 1.5M (7994) , Printer Cable Lapcare 3 Mtr. , Printer Cable Original , Printer Cable Ranz 10M , Printer Cable Ranz Bm Gold 10 M , Printer Cable Ranz / Volt It 1.5M , Printer Cable Ranz / Volt It 3M , Printer Cable Ranz / Volt It 5M , Printer Cable Usb 5Mtr 3.0 , Printer Epson M2170 Epil , Printer Epson Plq-35 Impact Dot Matrix , Printer Hp Deskjet 1212 , Printer Hp Lasejet Pro P1108 Plus , Printer Hp Laserjet M126nw , Printer Hp Laserjet Pro M126a , Printer Hp Never Stop Laser Mfp 1200A , Printer Hp Smart Ink Tank 580 , Printer Hp Smart Ink Tank 581 , Printer Inkjet Brother Dcp-T420w , Printer Inkjet Canon G2010 , Printer Inkjet Canon G2730 , Printer Inkjet Canon G3010 , Printer Inkjet Canon G3730 , Printer Inkjet Epson Ecotank L3210 , Printer Inkjet Epson Ecotank L3250 , Printer Inkjet Epson Ecotank L5290 , Printer Inkjet Epson Ecotank L8050 , Printer Inkjet Epson L130 , Printer Inkjet Epson M200 , Printer Inkjet Hp Smart Tank 520 , Printer Inkjet Hp Smart Tank 521 , Printer Inkjet Hp Smart Tank 524 , Printer Inkjet Hp Smart Tank 525 , Printer Inkjet Hp Smart Tank 584 , Printer Inkjet Hp Smart Tank 585 , Printer Laser Pantum M6518 , Printer Power Cable Ranz 1.5M , Printer Tvs Msp 270 Classic Plus Dot Matrix , Printhead Canon Bh-70 Black , Printhead Canon Bh-7 Black , Printhead Canon Ch-70 Color , Printhead Canon Ch-7 Color , Print Head Epson L220/360/3110 , Printhead Hp M0h0aa Tri Colour , Printhead Hp M0h51aa Black , Printhead Hp X4e75aa Black , Projector Celling Mount Stand 2Ft , Projector Epson Eb-E01 , Projector Stand Tripod Screen High Gain 4X6 , Psd Range Brochure-Print Outside The Box , Pvc Box 5X5 , Pvc Card Epson , Pvc Card Pinu Gold , Ram Desktop 16Gb Ddr4 Corsair Vengeance Lpx , Ram Desktop 16Gb Ddr4 Crucial , Ram Desktop 16Gb Ddr4 Pc3200 Starlite , Ram Desktop 16Gb Ddr4 Xpg Gamix D35 Black , Ram Desktop 16Gb Ddr5 Xpg Lancer Black , Ram Desktop 1Gb Ddr2 Memlite , Ram Desktop 2Gb Ddr3 Kingston Accer , Ram Desktop 4Gb Ddr3 Frontech , Ram Desktop 4Gb Ddr3 Hynex , Ram Desktop 4Gb Ddr4 Crucial , Ram Desktop 8Gb Ddr3 1600 Hynix , Ram Desktop 8Gb Ddr3 Frontech , Ram Desktop 8Gb Ddr3 Geonix , Ram Desktop 8Gb Ddr3 Pc1600 Starlite , Ram Desktop 8Gb Ddr4-2666 Hynix , Ram Desktop 8Gb Ddr4 Crucial , Ram Desktop 8Gb Ddr4 Pc3200 Starlite , Ram Desktop 8Gb Ddr4 Xpg Gamix D30 , Ram Desktop 8Gb Ddr4 Xpg Gamix D35 Black , Ram Laptop 16Gb Ddr4 Crucial , Ram Laptop 16Gb Ddr4 Pc3200 Starlite , Ram Laptop 1Gb Ddr2 Transcend Crucial , Ram Laptop 1Gb Ddr3 Samsung , Ram Laptop 4Gb Ddr3 Geonix , Ram Laptop 4Gb Ddr3 Starlite , Ram Laptop 512Mb Ddr2 Ramaxel , Ram Laptop 8Gb Ddr3 Pc1600 Starlite , Ram Laptop 8Gb Ddr4 Crucial , Ram Laptop 8Gb Ddr4 Pc3200 Starlite , Ram Laptop 8Gb Ddr5 Crucial 4800Mhz , Ranz Otg C Type Female Usb Male , Realme 13 5G Speed Green (8+128Gb) , Realme 14X 5G Crystal Black (8+128Gb) , Realme 14X 5G Golden Glow (6+128Gb) , Realme 14X 5G Golden Glow (8+128Gb) , Realme C61 Marble Black (4+64Gb) , Realme C63 Starry Gold (6+128Gb) , Realme P1 Speed 5G Textured Titanium (8+128Gb) , Redmi 12 5G Jade Black (8+256Gb) , Redmi 13C 5G Startrail Green (6+128Gb) , Redmi 13C 5G Startrail Silver (6+128Gb) , Redmi 14C 5G Starlight Blue (4+128Gb) , Redmi A3 Lake Blue (4+128Gb) , Redmi A3 Lake Blue (6+128Gb) , Redmi A3 Olive Green (6+128Gb) , Redmi Note 13 Pro 5G Coral Purple (8+256Gb) , Rgb Fan Nubwo Airforce Nft-100 , Ribbon Formujet Max Pr-02 , Ribbon Formujet Plq20 , Ribbon Lipi Pr-02 , Ribon Cartridge Formujet Lx310/Lq310 , Ribon Cartridge Formujet Plq 20/30 , Ribon Cartridge Lipi Plq 20 , Rj45 Connector , Rj45 Connectord-Link , Rj45 Lan Cable Cat 6 Finolex , Rj45 Switch D-Link 8Port , Rj45 Switch Mercusys 8Port Ms108g , Router D-Link Ac1200 Dual Band Dir811in , Router D-Link Wireless N300 , Router Lapcare 4G Sim 4-Antena Wi-Fi-6 , Router Tp-Link 1 Port Gigabit , Router Tp-Link Ac1200 Wi-Fi Router Archer C6 , Router Tp-Link Ac750 Wireless Dual Band Archer C24 , Router Tp-Link Wireless 300Mbps Tl-Wr820n , Rt Toner Drum-2/Chip-2/Blade-1 , Samsung Ep-T2510nbngin , Samsung Sgh Gt-E156 Jazzy Green (4+128Gb) , Samsung Sgh Gt M145 Arctic Blue (4/64Gb) , Screen Laptop 15.6 Normal Led 40 Pin 6048 , Screen Laptop 15.6 Paper 30 Pin Fhd , Screen Laptop 15.6 Paper Led 30Pin , Screen Laptop 15.6 Paper Led 40 Pin 6050 , Screen Led Laptop Lapcare , Screen Led Laptop Zeb Lsg15630cn , Secureye Xpon Onu 1110 Ont Data+Voice+Wifi , Simmtronics 128Gb Micro Sd Class 10 , Smart Pro Extension Board 4 Switch 1.8 Mtr , Smart Pro Extension Board 4 Switch 4.8 Mtr , Smart Pro Extension Board 6 Switch 1.8 Mtr , Smps Clarion Jm-Ps-920 , Smps Frontech 450W Ps-0005 , Smps Frontech 450W Ps0012 , Smps Frontech Pro 1000 Ps-0014 , Smps Geonix 500 Watt , Smps Gigabyte Gp-450B W 80+ Bronze , Smps Gigabyte Gp-P550b 550 Watt Bronze , Smps Lapcare 450W , Smps Msi Mag 550W A550bn , Smps Msi Mag 650W A650bn , Speaker Bluetooth Boat Stone 352 Pro , Speaker Bluetooth Boat Stone 358 Pro , Speaker Bluetooth Boat Stone Spinx Pro , Speaker Bluetooth Zeb Mob Action Blk , Speaker Coconut Us06 , Speaker Frontech Spk-0003 , Speaker Frontech Spk-0005 , Speaker Hp 360 Silver Bluetooth , Speaker Hp Multimedia Dhs-2111 , Speaker Lapcare Lus-009 , Speaker Lapcare Lus-040 , Speaker Lapcare Lus-204 , Speaker Wireless Hp S300 , Spike Guard Ranz , Spike Guard Voltit 4 Sw 1.8Mtr. , Ssd 1Tb Portable Crucial X6 , Ssd 1Tb Portable Sandisk E-30 , Ssd 2Tb Lexar Sl200 Portable , Ssd M.2 256Gb Simmtronics S950p Pro , Ssd Nvme 128Gb Evm , Ssd Nvme 250 Gb Wd Green Sn350 , Ssd Nvme 256Gb M.2 Lexar Nm620 , Ssd Nvme 256Gb Scuda , Ssd Nvme 480Gb Crucial E100 , Ssd Nvme 500Gb Crucial P3 3D Nand , Ssd Nvme 500Gb Crucial P3 Plus Gen4 3D , Ssd Nvme 500 Gb Wd Green Sn350 , Ssd Nvme 512Gb M.2 Pcie Scuda , Ssd Nvme Crucial P3 Plus 500Gb Gen4 , Ssd Nvme P3 1Tb Crucial 3D Nand , Ssd Sata 1000Gb Crucial Bx500 , Ssd Sata 128Gb Intex , Ssd Sata 128Gb Lapcare , Ssd Sata 240Gb Lexar Nq100 , Ssd Sata 240Gb Wd Green , Ssd Sata 256Gb Colorfire Gamepower , Ssd Sata 256Gb Frontech , Ssd Sata 256Gb Scuda , Ssd Sata 480/500Gb Lexar Nq100 , Ssd Sata 480Gb Wd Green , Ssd Sata 500Gb Crucial Bx500 , Ssd Sata 512Gb Frontech , Sundisk Ultra Micro Sd 512Gb , Switch 2 Port Usb Ad Net , Switch 2 Port Usb Mckrocdgc , Switch 5 Port Dlink 10/100 Un Magd Des-1005C , Tab Acer One 7 4G , Tally Prime Silver Edition , Tallyprime With Whatsapp - New Subscription , Tally Software Service-Gold , Tally Software Service-Silver , Thermal Printer Tm-T82x-461 Epson , Thermal Receipt Printer Gobbler 58Mm Hop H58 , Thermal Receipt Printer Gobbler 58Mm Hop H58 (U+B) , Thermal Receipt Printer Sp-Pos891usd , Toner Cartridge 152A , Toner Cartridge 18A With Chip , Toner Cartridge Brother Tnb021 , Toner Cartridge Canon 071 , Toner Cartridge Cf247a Volt It , Toner Cartridge Cf256a/56X , Toner Cartridge Chip Cl256a/56A , Toner Cartridge H-166Hp Black , Toner Cartridge H-388A , Toner Cartridge H-505A/280A , Toner Cartridge Hp 103A , Toner Cartridge Hp 103Ad , Toner Cartridge Hp 158A (W1580a) , Toner Cartridge Hp 158X (W1580x) , Toner Cartridge Hp 56A , Toner Cartridge Hp Laserjet 335X , Toner Cartridge Hp Original 78A , Toner Cartridge H-W1112a (110 A) , Toner Cartridge Ice-337 , Toner Cartridge Jf-2612A , Toner Cartridge Lpc278a , Toner Cartridge Lpc279a , Toner Cartridge Lpcd111s , Toner Cartridge Ml-1610D2 , Toner Cartridge Mlt D 101 , Toner Cartridge P-Pg208kev Black , Toner Cartridge Tc-3238 , Toner Cartridge Tn-1020 , Toner Cartridge Tn-116 , Toner Cartridge Tn2365 , Toner Cartridge Tn2465 , Toner Cartridge Tn-420 , Toner Cartridge Volt It 35A/36A/85A/925 , Toner Cartridge Voltitbrother B-Tn B20/21/22/23 , Toner Cartridge W1370a/137A , Tp-Link Ac600 Wl+Bt Usb Adapter Archer T2ub Nano , Tp-Link Eathernet Adapter 3.0 Ue330 , Tp-Link Eathernet Adapter Type-C Ue300c , Type C Printer Cable Ranz 1.5M , Type-C To Nvme Ssd Casing , Type C To Usb Otg Orginal , Ugreen Pci Exp Gigabit Adaptor Us230-30771 , Ups Apc 1100Va , Ups Apc Bx600c-In , Ups Battery Cyber Power , Ups Fingers Fr-1250Lcd , Ups Frontech Ft-2569 Force 725 , Ups Frontech Ft-2570 1Kva , Ups Frontech Ft-2571 Static Converter Voltex 1.2 Kv , Ups Microtek Legend 1000 1Kva , Ups Microtek Legend 750M , Ups Zebronics U735 , Usb A To Lightning Port Cable Lapcare , Usb Bluetooth Dongle 5.0 , Usb Cable 1.5M Kral , Usb Combo ( Hub+Card Reader) 3.0 , Usb C Power Adapter (20Watt)_Muvr3hn/A , Usb Dongle Lapcare 4G Lte , Usb Extension Cable 3.0-5Mtr Maxicom , Usb Extension Cable 5Mtr Terabyte , Usb Extension Cable Adnet 3M , Usb Extension Cable Kral 3M , Usb Extension Cable Ocean 1.5M , Usb Extension Cable Ranz 10M , Usb Extension Cable Ranz 5M , Usb Extension Cable Volt It Cable 1.5M , Usb Hub Clarion 3.0 4 Ports Jm-Usbh-008 , Usb Hub Frontech Nc-0007 , Usb Hub Frontech Nc-0011 , Usb Hub Lapcare2.0 4Port Lhb-006 , Usb Hub Type C Ranz 4 Port , Usb Hub Volt It 4 Port 3.0 Metal , Usb Male-Female Cable Lapcare 1.5Mtr , Usb To Lan Card Ranz Type C , Usb To Lan Ranz 2.0 , Usb To Lan Ranz 9700 , Usb To Lan Smartpro 2.0 Metal , Usb To Mini Usb Cable , Usb To Paralal Converter , Usb To Ps2 Converter , Usb To Sound Card Ranz , Usb To Usb Cable 1.5M , Usb To V3 Cable Ranz 1.5M , Usb Wifi Adapter Tp-Link Tl-Wn823n , Usb Wifi Dongle + Bluetooth Ranz , Usb Wifi Dongle + Bluetooth Volt It , Usb Wifi Dongle Geonix , Usb Wifi Dongle Lapair Lwd-300 , Usb Wifi Dongle Ranz 450M , Usb Wifi Dongle Volt It 802.11N , Vga Cable 1.5M Original , Vga Cable 1.5M Original Samsung , Vga Cable Lapcare , Vga Cable Lapcare Premium 3M , Vga Cable Ranz 10M , Vga Cable Ranz 1.5M , Vga Cable Ranz 3M , Vga Cable Ranz 5M , Vga Switch 2 Port , Vga Switch 4 Port , Vivo Charger V1530h0a0 - In White , Vivo T3 5G Vibrant Green (6+128Gb) Lite , Vivo T3x 5G Crimson Bliss (8+128Gb) , Vivo V40e Royal Bronze (8+256Gb) , Vivo V50 Starry Night (8+256Gb) , Vivo Y18i Space Black (4+64Gb) , Vivo Y18t Space Black (4+128Gb) , Vivo Y28e 5G Vintage Red (4+128G) , Vivo Y28e 5G Vintage Red (4+64G) , Vivo Y28e Breeze Green (4+64Gb)_C , Vivo Y28e Vintage Red (4+64G)_C , Vivo Y28s 5G Twinkling Purple (8+128Gb) , Vivo Y29 5G Diamond Black (8+256Gb) , Vivo Y29 5G Glacier Blue (6+128Gb) , Vivo Y29 5G Titanium Gold (8+128Gb) , Vivo Y300 5G Phantom Purple (8+128Gb) , Vivo Y300 5G Titanium Silver (8+256Gb) , Volt It Chip Hp-56/A , Wall Mount Kit 14-26 Fix , Wall Mount Kit 14-27 Moving Ranz , Wall Mount Kit 14-42 , Webcam Logitech C270 Hd , Webcam Logitech C505e , Webcam Logitech Fhd 1080P Brio 100 Graphite , Wifi Adapter Clarion Jm-Wl-300Mbps , Wifi Bt Adapter Clarion 600Mbps (Ja-2025) , Wifi Range Extender Tp-Link Ac750 Dual , Wifi Range Extender Tp-Link Tl-Wa850re , Windows 10/11 Pro For Oem Sticker , Windows 10 Pro Key Dvd Pack , Wireless Mouse Coco Sports Joy Wm31-Black , Wireless Speaker Coco Sports Bs02-Carman , Xiaomi Power Bank 4I 10000Mah , Xiaomi Power Bank 4I 20000Mah , Ips Sword , General Sword , Computer scanner , Computer scanner Cum Printer , Wbps Sword
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 11
West Bengal View Result →
13.
Power #10839226 AOC
Tender For Biennial Service Contract For Various Ht And Lt Electrical Cabling Jobs At Plant, Ktps Under Emoph Department- 1 VARIOUS ELECT. CABLING JOBS 2 Tracing of Control cable (different size) along cable trench 3 Tracing of power cable (upto 35 sqmm)along cable trench 4 Tracing of power cable (50 to 95 sqmm)along cable trench 5 Tracing of power cable (120 to 300 sqmm)along cable trench 6 9M Octagonal steel tubular Street Lightpole installation 7 Supply & Erection of PCC Foundation forerection of 9M Octagonal steel tubular Street Light pole 8 Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessarymending good damages & painting Up to 2 Core 25 sqmm 9 Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthingattachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Up to 3/4 Core 25 sqmm 10 Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending gooddamages & painting From 3 /3 ½ Core 35 Sqmm to 3/3 ½ Core 50 Sqmm 11 Laying of Cable on wall/surface, including supply & fixing of MS saddle with earthingattachment in 10SWG GI wire making holes etc as necessary mending good damages & painting above3 /3 ½ Core 50 Sqmm and up to 3/3 ½ Core 90 Sqmm. 12 Laying of Cable on wall/surface including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting above3 /3 ½ Core 90 Sqmm and upto 3 /3 ½ Core 150 Sqmm. 13 Laying of Cable on wall/surface including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending gooddamages & painting above 3 /3 ½ Core 150 Sqmm and up to 3/3 ½ Core 185 Sqmm 14 Laying of Cable through existing RCC/Hume /GI Pipe,Open masonry Trench/Cable Tray for Single 2,3,,3 ½ & 4 Core up to 50 Sqmm 15 Laying of Cable through existing RCC/ Hume /GI Pipe,Open masonry Trench /Cable Tray for Single 2,3,3 ½ & 4 Core Above 50 Sqmm and up to 400 Sqmm. 16 Laying of Control Cable on Cable Tray, 2 Core to 5 Core upto 4 sq.mm 17 Laying of Control Cable on Cable Trayabove 5 Core 2.5 Sq. mm and upto 12 Core 2.5 sq. mm 18 Laying of cable up to 11 kV grade3/3.5/4 Core x 185 sq.mm through U/G trench with necessary brick & Sand protection, Depth of Trench : 3ft(min), wide: 1.5ft 19 Laying of cable up to 11 kV grade 3/3.5/4 Core x 185 sq.mm through tussel/tray with necessary protection 20 Laying of 11kV grade 1Cx630 sq.mmAL cable on tray 21 Laying of the 3.5X 95 Sqmm Al U/G cable with necessary brick & Sand protection, Depth of Trench : 3ft(min), wide: 1.5ft 22 Laying of the 3.5X300 Sqmm Al U/G cable with necessary brick & Sand protection, Depth of Trench : 3ft(min), wide: 1.5ft 23 Laying of one No. cable upto 35 sqmm In underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. 24 Laying of 3½X95 Sqmm Al. Cable on wall 25 Laying of control cable (different size) along cable trench 26 Laying of power cable (upto 35 sqmm)along cable trench 27 Laying of power cable (50 to 95 sqmm)along cable trench 28 Laying of power cable (120 to 300 sqmm)along cable trench 29 Supply & Fixing double compressionGland 2 Core above 16 and upto 25 sqmm 30 Supply & Fixing double compressionGland 2 Core above 25 and upto 35 sqmm 31 Supply & Fixing double compressionGland 2 Core above 35 and upto 50 sqmm 32 Supply & Fixing double compressionGland 3 Core upto 6 sqmm 33 Supply & Fixing double compressionGland 3 Core above 6 and upto 10 sqmm 34 Supply & Fixing double compressionGland 3 Core above 10 and upto 16 sqmm 35 Supply & Fixing double compressionGland 3 Core above 16 and upto 25 sqmm 36 Supply & Fixing double compressionGland 3 Core above 25 and upto 35 sqmm 37 Supply & Fixing double compressionGland 3 Core above 35 and upto 50 sqmm 38 Supply & Fixing double compressionGland 3 Core above 50 and upto 70 sqmm 39 Supply & Fixing double compressionGland 3 Core above 70 and upto 95 sqmm 40 Supply & Fixing double compressionGland 3 Core above 95 and upto 120 sqmm 41 Supply & Fixing double compressionGland 3 Core above 120 and upto 150 sqmm 42 Supply & Fixing double compressionGland 3 Core above 150 and upto 185 sqmm 43 Supply & Fixing double compressionGland 3 Core above 185 and upto 240 sqmm 44 Supply & Fixing double compressionGland 3 Core above 240 and upto 300 sqmm 45 Supply & Fixing double compressionGland 3 Core above 300 and upto 400 sqmm 46 Supply & Fixing double compressionGland 4 Core upto 4 sqmm 47 Supply & Fixing double compressionGland 4 Core above 4 and upto 6 sqmm 48 Supply & Fixing double compressionGland 4 Core above 6 and upto 10 sqmm 49 Supply & Fixing double compressionGland 4 Core above 10 and upto 16 sqmm 50 Supply & Fixing double compressionGland 4 Core above 16 and upto 25 sqmm 51 Supply & Fixing double compressionGland 4 Core above 25 and upto 35 sqmm 52 Supply & Fixing double compressionGland 3 ½ Core upto 25 sqmm 53 Supply & Fixing double compressionGland 3 ½ Core above 25 and upto 35 sqmm 54 Supply & Fixing double compressionGland 3 ½ Core above 35 and upto 50 sqmm 55 Supply & Fixing double compressionGland 3 ½ Core above 50 and upto 70 sqmm 56 Supply & Fixing double compressionGland 3 ½ Core above 70 and upto 120 sqmm 57 Supply & Fixing double compressionGland 3 ½ Core above 120 and upto 150 sqmm 58 Supply & Fixing double compressionGland 3 ½ Core above 150 and upto 185 sqmm 59 Supply & Fixing double compressionGland 4 Core above 35 and upto 50 Sqmm 60 Supply & Fixing double compressionGland 6 Core x 4 Sqmm 61 Supply & Fixing double compressionGland 10,12 Core x 2.5 Sqmm 62 Supply & Fixing double compression Gland10 Core x 4 Sqmm 63 Supply & Fixing of Double CompressionGland for 1CX630 sq.mm Cable 64 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointig material upto 2 core 4 Sqmm 65 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 6 Sqmm 66 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 10 Sqmm 67 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 16 Sqmm 68 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 25 Sqmm 69 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 35 Sqmm 70 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 2 core 50 Sqmm 71 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 25 Sqmm 72 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 35 Sqmm 73 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 50 Sqmm 74 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 70 Sqmm 75 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 95 Sqmm 76 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 120 Sqmm 77 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 150 Sqmm 78 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 3.5 core 185 Sqmm 79 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 2.5 Sqmm 80 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 4 Sqmm 81 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 6 Sqmm 82 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 10 Sqmm 83 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 16 Sqmm 84 Finishing the cable of each core end bycrimping method including supply and fixing solder less socket(dowels),tape anticorrosive paste & jointing material upto 4 core 25 Sqmm 85 Finishing of the PVC insulated wire endsby socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes upto 2.5 sqmm 86 Finishing of the PVC insulated wire endsby socketing with pin/ring type copper sockets and insulated tapesetc. including supplying sockets, tapes 4 sqmm 87 Finishing of the PVC insulated wire endsby socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 6 sqmm 88 Finishing of the PVC insulated wire endsby socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 10 sqmm 89 Finishing of the PVC insulated wire endby socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 16 sqmm 90 End termination with socketing ofcontrol cable (up to 9 core) with gland and socket supply 91 End termination with socketing ofcontrol cable (Above 9 core) with gland and socket supply 92 End termination with socketing of powercable (up to 35 sq-mm) with gland and socket supply 93 End termination with socketing of powercable (50 sq-mm to 95 sq-mm) 94 End termination with socketing of powercable 120 sq-mm to 300 sq-mm) 95 Supply & Fixing of perforated GI cabletray of size 100x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as requiredIncl. Al painting of MS support. (Without angle iron support). 96 Supply & Fixing of perforated GI cabletray of size 150x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as requiredIncl. Al painting of MS support. (Without angle iron support) 97 Supply & Fixing of perforated GI cabletray of size 200x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as requiredIncl. Al painting of MS support. (With25x25x3mm angle iron support). 98 Supply & Fixing of perforated GI cabletray of size 300x50x1.25mm (18SWG) with perforation not more than 17.5% suspended from ceiling incl. S&F GIconnector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required Incl. Al painting of MS support. (With 25x25x3mm angle iron support) 99 Fixing of 600 mm GI Cable Tray 100 Equipment Earthing by earth bus barconnecting to the equipment body earthing to earth bus bar including S&F 25mmX6mm galvanized MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc. 101 Equipment earthing by connecting theequipment body to earth busbar including S&F 50mm X 6mm galvanized(Hot Dip) MS flat on wall/floor with GI saddle asrequired and connection to equipments with incl. drilling holes, bolts, nuts,washers etc 102 Fixing of cable Tray including fixing oftray support. 103 LAYING OF 50/6 G.I. FLAT FOR RUNNINGEARTH & DAMAGED WELDING ETC 104 Dismantling of Control Cable 105 Dismantling of 3X185 Sqmm Al. LT Cable 106 Dismantling of 3.5 X 35/50 Sqmm Al.Cable from Cable Trench 107 Dismantling of 3.5 X 300 Sqmm Al. Cablefrom Cable Tray/trench 108 Dismantling of 3.5 X 185 Sqmm Al. Cablefrom Cable Tray/trench 109 Dismantling of St. Light Pole Damaged JB and 4X16 Sqmm Cable End & re-termination cable New JB 110 Dismantling of 9 M old damaged StreetLight pole 111 Supply & Jointing of 3½X95 Sqmm Al.Cable St. Through 112 Supply & St. Through Jointing of 3½ X 35Sqmm Al. Cable 113 Supply & St. Through Jointing of 3½ X 50Sqmm Al. Cable 114 Supply & St. Through Jointing of 5 X 2.5Sqmm control Cable 115 Jointing of control cable (upto 9 core)with jointing kit 116 Jointing of control cable (above 9core)with jointing kit 117 Jointing of Power cable (upto 35 sqmm)with jointing kit 118 Jointing of Power cable (50 to 95 sqmm) with jointing kit 119 Jointing of Power cable (120 to 185sqmm) with jointing kit 120 Jointing of Power cable (300 sqmm)with jointing kit 121 Straight Through Joint including supplyof material [Heat Shrinkable jointing kit of reputed make ] for the 6.6/11 kV grade cable 1 Core x 630 sq.mm AL 122 End jointing including Supply of Material [Heat Shrinkable End joint kit of reputed make ] for the 6.6/11 kV grade cable 1 Core x 630 sq.mm AL 123 Straight Through Joint including supplyof material [Heat Shrinkable jointing kit of reputed make ] for the 6.6/11 kV grade 3 Core 185 sq. mm XLPE Cable 124 End Jointing including supply of end jointing kit for the 6.6/11 kV grade 3 Core 185 sq. mm XLPE Cable 125 Straight Through joint including supplyof material for the 1.1kV grade cable up to 7 Core x 2.5-4.0sq.mm Cu 126 Straight Through joint including supplyof material for the 1.1kV grade cable 8-14 Core x 2.5-4sq.mm Cu 127 Straight Through Joint including supplyof material for the 1.1kV grade cable 3/3.5/4 Core x 16-35 sq.mm AL 128 Straight Through Joint including supplyof material for the 1.1kV grade cable 3/3.5/4 Core x 50-95 sq.mm AL 129 Supply & Socketing of 3.5 X 300 Sqmm Al.cable 130 Supply & Socketing of 3.5 X 185 Sqmm Al.cable 131 Laying of 1CX630 Sq.mm 6.6KV XLPE Cableon cable tray/trench. 132 Laying of 3X240 sqmm Al 6.6kV XLPEunderground cable, with supply of 16 nos. bricks per mtr. 133 Laying of 300mm dia. GI/MS pipe forroad crossing of 3X240sqmm 6.6kV XLPE U/G Al cable 134 Laying & termination of 11KV CableLaying & termination of 3Cx95sq.mm , 11 KV grade, XLPE armoured power cable at underground trench of with 460mm wide and side with sand filling. Cable will be lay on sand which will be covered by brick as said. with 24 (Twenty Four) Nos. bricksper Mtr. including filling the spacebetween the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. Gap between two laid cable will be 350mmx 760mm at average depth of 1Mtr, with brick protection on top 135 Supply, Delivery & installation of 1C,630 Sqmm, 6.6 KV, XLPE end termination including kit & termination charge. (Make: 3M) 136 Supply, Delivery & installation of 1C,630 Sq.mm, 6.6KV, XLPE straight through jointing Kit (Make: Raychem) & jointing charge 137 Supply,delivery & installation of3 x 240 sqmm 6.6KV XLPE cable St- Through Jointing Kits. Tapex type. Make- 3M with jointing charge 138 Supply,delivery & installation of3 x 185 sqmm 6.6KV XLPE cable St- Through Jointing Kits. Tapex type. Make- 3M with jointing charge 139 Supply and Termination of End Termination kit 3X185sqmm 6.6kV XLPE cable 140 End termination cable alongwith kits.End termination of 3CX95Sq.mm 11KV grade Al Cable along with supply of Jointing Kits(Heat shrinkable of Make:3M/Raychem)complete with all accessories including lugs. 141 Supply & fixing of HT tape (use upto 33kv) 142 Supply & fixing of PCC cable marker 143 Cutting & Testing of 3 x 240Sqmm 6.6KVXLPE U/G Cable 144 Soil cutting & Ash cutting ofinside Cable trench 145 Termination of 3X185 sqmm 6.6kV XLPEAL cable End. 146 Straight through jointing of 3X240sqmmXLPE cable 147 Charges towards jointing of 3X185 sq mmXLPE Cable 148 Dismantling of Al. 1C, 630 Sq.mm, 6.6KVXLPE cable end 149 Dismantling of 3X185sqmm old damaged3X185sqmm 6.6kV XLPE cable termination kit. 150 Dismantling of 3X240 sqmm 6.6kV XLPE underground cable ( 1.5m depth) 151 Cleaning of 3X185sqmm XLPE compoundtype cable end 152 Fixing of Cast Iron Cable route markeron concrete foundation along with supply. 153 Tracing of 1C, 630 Sq.mm 6.6KV, XLPE,Al cable 154 Erection of 9 M long steel tubular pole 155 Supply and fixing of bend pipe
Contract Date: May 30, 2026 Contract Value : 22.93 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
14.
Power #10833817 AOC
Tender For Cable Laying And Allied Jobs For Power Supply To Ash Water Recovery Pumps At Ash Pond # 4A, Ktps Under Capex 2025-26 - 1 CABLE LAYING AND ALLIED JOBS FOR POWER SUPPLY TO ASH WATER RECOVERY PUMPS AT ASH POND # 4A, KTPS 2 Laying of 3.5C, 240 / 300 SqmmAl. U/G Cable 3 Supply and glanding of 3.5 C , 300 Sqmm Al cable 4 Supply and socketing of 300 Sqmm Al cable 5 End Termination of 3.5C, 240 /300 Sqmm Al. Cable 6 Laying of 3/3.5 X 95/120 SqmmAl. U/G Cable 7 End Termination of 3/3½ X95/120 Sqmm Al. Cable 8 Supply and socketing of 120 Sqmm Al cable 9 Supply & Glanding of 3/3½ X95/120 Sqmm Al. Cable 10 Laying of 3 X 16 Sqmm Al. U/GCable 11 End Termination & Glanding of3 X 16 Sqmm Al. Cable 12 Supply & Fixing of 63 A, 6 way TPN MCB Box; Anchor/ havells 13 Supply & Fixing of 63 A, TPN MCB; Anchor/ havells 14 Supply & Fixing of 16A to 32ASPN MCB; Anchor/ havells 15 Supply and fixing of 63 A TPN recepticle; Ancho/ Havells 16 Supply & Laying of 20mm PVC rigid pipe; Preeti plast/Pritam 17 Supply & Laying of 0.75 SqmmCu Wire; Finolex/Anchor 18 Supply & Laying of 1.5 Sqmm CuWire; Finolex/Anchor 19 Supply & Laying of 2.5 Sqmm CuWire; Finolex/Anchor 20 Supply & Laying of 6 Sqmm CuWire; Finolex/Anchor 21 Supply & Fixing of 6A Switch; Anchior/Havells 22 Supply & Fixing of 6A PlugSocket; Anchor/Havells 23 Supply & Fixing of 16A Switch; Anchor/Havells 24 Supply & Fixing of 16A PlugSocket; Anchor/Havells 25 Supply & Fixing of 8/10 TW Box 26 Supply & Fixing of 8/6 TW Box 27 Supply & Fixing of 24W LEDTubelight Set; Philips/Havells 28 Supply & Fixing of 60W Street light; Havells/Panasonic 29 Supply & Erection of 50 mm dia10 ft long GI Earth pipe of TATA make with PCC Chamber, Salt and CharcoalEtc. 30 Soil Excavation for EarthingSystem 31 Supply & laying of GI strip of 6mmx25mm size with welding 32 Supply & Fixing of Earth Bar; GI 33 Supply, layingand fixing of 200 mm cable Tray for local control panel. 34 Supply, layingand fixing of 150 mm cable Tray for local control panel. 35 Supply, layingand fixing of 100 mm cable Tray for local control panel. 36 Supply, layingand fixing of 50 mm cable Tray for local control panel. 37 Grouting with hooks to fix the LT Incomer panel on the wall with supply of hooks and other materials necessary for fixing. 38 Supply and installation of Lightning arrester, 25 MM DIA, 3 FT LONG 39 Laying of 9C / 7C control cable 40 Supply and fixing of LOS with 2 NO-2NC
Contract Date: Jun 03, 2026 Contract Value : 2.02 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
15.
Rural Development #10833343 Price Bid
Tender For Providing Various Type Of Material For Various Work In Fin Year 2026-27 At Vp Jharwad Kh - Wash Sand3 Sand4 Murum5 Gravel 8 MM6 Gravel 10 MM7 Gravel 12 MM8 Gravel 16 MM9 Grit Powder10 Tandoor Flooring11 Shahabadi Flooring12 Styles13 Cement 53 Grade14 Glass Styles15 Steel 8 MM16 Steel 10 MM17 Steel 12 MM18 Steel 16 MM19 SQUARE BAR 8,10,12,16 MM20 Winding Wire21 Screw J Hook22 FLY ASH Bricks23 Chemical24 Block25 Grill Window26 Cement Frame27 Kadapa28 Chamber 2 X 329 Chamber 2 X 230 Chamber 3 X 331 Chamber 4 X 432 Iron Flank 2.5 inches33 Iron flange 3 inches34 Iron flange 4 inches35 5 HP Electric Motor Mermaid36 1 HP Electric Motor Mermaid37 7.5 HP Electric Motor Mermaid38 12.5 HP Electric Motor Mermaid39 cable 3 cor40 triple layer water tank41 63 MM PVC PIPE42 63 MM L BO43 63 MM T44 63 MM REDUCER45 63 MM COUPLING46 63 MM FTA47 63 MM MTA48 63 MM HDPE PIPE49 75 MM PVC PIPE50 75 MM L BO51 75 MM T52 75 MM REDUCER53 75 MM COUPLING54 75 MM FTA55 75 MM MTA56 75 MM H.D.P.E PIPE57 90 MM PVC PIPE58 90 MM L BO59 90 MM T60 90 MM COUPLING61 90 MM REDUCER62 90 MM FTA63 90 MM MTA64 90 MM HDPE PIPE65 4 inch PVC PIPE66 4 inch L BO67 4 inch T68 4 inch coupling69 4 inch reducer70 4 inch FTA71 4-inch MTA72 4 inch HDPE pipe73 1 HP STARTER74 3 HP STARTER75 7.5 HP STARTER76 12.5 HP STARTER77 1.25 inch HDPE78 6 inch PVC PIPE79 6 inch L bend80 6 inch T81 6 inch coupling82 6 inch reducer83 6 inch FTA84 6 inch MTA85 6 inch HDPE pipe86 1/2 inch UPVC pipe87 1/2 inch L bend UPVC88 1/2 inch T UPVC89 1/2 inch coupling UPVC90 1/2 inch reducer UPVC91 1/2 inch cock tap UPVC92 1/2 inch cock UPVC93 2 inch cock PVC94 3 inch cock PVC95 NON RETURN VOLVE96 AIR WAL97 SWITCH WAL98 Drip bundle 16 MM99 Joiner100 Solution101 Nylon cord102 1.5 HP motor103 Cement Color 25 KG104 Cement Color 10 KG105 Cement Color 5 KG106 Distemper 05 Liter107 Distemper 10 Liters108 Distemper 20 Liters109 Primer Outer110 Primer Inner111 ACROLIC COLOR112 Emulsion Color113 APEX COLOR114 DAM Proof115 Crack Seal Powder116 Cryac Sil Liquid117 Oil Paint118 APEX ROYAL COLOR119 ASIAN PAINTS ACE120 ASIAN PAINTS STAR121 Terracotta Color122 Plastic Paints123 Turfen124 Polish paper125 Brush Color126 wire brush127 LED LIGHT 18 VAT128 LED LIGHT 20 VAT129 LED FLOOD LIGHT 36 VAT130 LED FLOOD LIGHT 50 VAT131 LED FLOOD LIGHT 100 VAT132 LED FLOOD LIGHT 150 VAT INCLUDING LAMP WITH PF7 0.95 CLASS IP 65 AND ABOVE133 FRP BOX SIZE 300 MM X 200 MM X 125 MM 2.7 MM THICK COMPLETE134 SUPPLYING ERECTING AND MARKING DPMCB 6 A TO 32 A B SERIES135 SUPPLYING AND ERRECTING STREET LIGHT BRACKET FOR ERECTION OF DOUBLE FITTING TUBULOR WELDED POLE WITH 40 MM DIA 1.0 M LONG B GRADE GI PIPE ALONG WITH POLE CAP OF 125 MM DIA 600136 2 CORE CABLE 10 SQ MM ALUMINUM CONDUCTOR WITH CONTINUOS 5.48 SQ MM (12 SWG)137 SUPPLYING AND ERRECTING COST IORN CABLE INDICATOR PLOT BURIED ALONG WITH ROUTE OF CABLE PVC XLPE ARMAUED CABLE138 9 MTR HIGHT OCTAGONAL POLE WITH FOUNDATION BOLTS HAVING BOTTOM OF 155 MM A/F TOP 70 MM A/F PROVIDED FOUNDATION139 GI PIPE 40 MM DIA OR 20 MM DIA GI ROD140 2 X 4 SQM FR COPPER PVC INSULATED WIRE LAID IN PROVIDED CONDUCT AND TRACKING INSIDE POLE BUS BARS141 GI PIPE A CLASS 40 MM DIA ERECTED FOR ENCLOSING XLPE ARMOR CABLEON WALL POLE142 1.20 M X 0.90 M SIZE INFORMATION 130 ARD 1.25 MM THICK143 GI PIPE 2 X 2144 GI PIPE 1 inch X 1 inch145 GI PIPE 1 X 1146 GI PIPE 1.5 X 1.5 INCH147 GI PIPE 3 X 1.5 INCH148 GI PIPE 3 X3149 GI PIPE 1 X 3150 GI PIPE 1 X 2151 GI PIPE 2 X 4152 C ANGLE 25 X 3153 C ANGLE 50 X 5154 C ANGLE 40 X 5155 C ANGLE 65 X 5156 F strip 18 X 4157 F strip 30 X 5158 F strip 20 X 3159 GI SEAT COATING160 CHAINLIN FENCING161 i BIM 100 X 50162 C Beam 75 X 40163 MS plate164 6 MM MS BAR165 PIPE MS 2166 PIPE MS 1167 PIPE MS 0.5168 PAVER BLOCK 60 MM169 PAVER BLOCK 80 MM170 Anganwadi Dresses171 Bench172 Handwash Stand173 Sanitizer Stand174 WashBashing Pot175 E Learning Instruments176 Computer177 Printers178 TMT STEEL BAR179 DUST BIN180 UNDER GROUND CEMENT PIPE181 SOUND SYSTEM182 WATER METER183 WATER CONNECTION184 SOLAR PANNER SYSTEM185 MEDICAL186 GRAPHITE TANK187 TRAY CYCLE188 BIG COMMON DUST BIN189 INDIVIDUAL DUSTBEEN190 PLASTIC COLLECTION UNIT.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
16.
Rural Development #10803492 Price Bid
Tender For Providing Various Type Of Material For Various Work In Fin Year 2026-27 At Vp Malegaon , -2 wash sand 3 sand 4 mudroom 5 vertical 8 MM 6 vertical 10 MM 7 vertical 12 MM 8 vertical 16 MM 9 grit powder 10 Floor Tandoor Kota 11 Farshi Shahabadi 12 styles 13 Cement 53 Grade 14 glass styles 15 Steel 8 MM 16 Steel 10 MM 17 Steel 12 MM 18 Steel 16 MM 19 SQUARE BAR 8,10,12,16 MM 20 voiding wire 21 screw j hook 22 FLY ASH Vita 23 chemical 24 blocks 25 grill window 26 cement square 27 Kadapa 28 Chamber 2 3 29 Chamber 2 X 2 30 Chamber 3 X 3 31 Chamber 4 X 4 32 Lokhandi Flanch 2.5 Inch 33 Lokhandi Flanch 3 Inch 34 Lokhandi Flanch 4 Inch 35 5hp electric motor mermaid 36 1HP Electric Motor Jalpari 37 7.5HP Electric Motor Jalpari 38 12.5HP Electric Motor Jalpari 39 cable 3 core 40 triple layer water tank 41 63 MM PVC PIPE 42 63 MM L BO 43 63 MM T 44 63 MM REDUCER 45 63 MM Coupling 46 63 MM FTA 47 63 MM MTA 48 63 MM HDPE PIPE 49 75 MM PVC PIPE 50 75 MM L BO 51 75 MM T 52 75 MM REDUCER 53 75 MM COUPLING 54 75 MM FT 55 75 MM MTA 56 75 MM H.D.P.E PIPE 57 90 MM PVC PIPE 58 90 MM L BO 59 90 MM T 60 90 MM Coupling 61 90 MM REDUCER 62 90 MM FT 63 90 MM MTA 64 90 MM HDPE PIPE 65 4 INCH PVC PIPE 66 4 Inch L BO 67 4 Inch T 68 4 inch coupling 69 4 inch reducer 70 4 Inch FTA 71 4 Inch MTA 72 4 inch HDPE pipe 73 1HP STARTER 74 3HP STARTER 75 7.5HP STARTER 76 12.5HP STARTER 77 1.25 inch HDPE 78 6 INCH PVC PIPE 79 6 Inch L Bow 80 6 Inch T 81 6 inch coupling 82 6 inch reducer 83 6 Inch FTA 84 6 Inch MTA 85 6 Inch HDPE Pipe 86 1/2 Inch UPVC Pipe 87 1/2 Inch L Bow UPVC 88 1/2 Inch T UPVC 89 1/2 Inch Coupling UPVC 90 1/2 Inch Reducer UPVC 91 1/2 Inch Cock Totti UPVC 92 1/2 Inch Cock UPVC 93 2 Inch Cock PVC 94 3 Inch Cock PVC 95 Non-Return Valve 96 Air Wall 97 Switch Wall 98 Tick Bundle 16 MM 99 Jointer 100 Solution 101 Nylon Door 102 1.5 HP Motor 103 Cement Color 25 KG 104 Cement Color 10 KG 105 Cement Color 5 KG 106 Distemper 0.5 Liter 107 Distemper 10 litter 108 distemper 20 liter 109 Primer Outer 110 primer inner 111 ACROLIC COLOR 112 emulsion color 113 APEX COLOR 114 DAM PROOF 115 Krayak Sil Powder 116 Cryak Sil Liquid 117 oil paint 118 APEX ROYAL COLOR 119 ASIAN PAINTS ACE 120 ASIAN PAINTS STAR 121 terracotta color 122 plastic paints 123 turfen 124 polished paper 125 brush color 126 wire brush 127 LED LIGHT 18 VAT 128 LED LIGHT 20 VAT 129 LED FLOOD LIGHT 36 VAT 130 LED FLOOD LIGHT 50 VAT 131 LED FLOOD LIGHT 100 VAT 132 LED FLOOD LIGHT 150 VAT INCLUDING LAMP WITH PF7 0.95 CLASS IP 65 AND ABOVE 133 FRP BOX SIZE 300 MM X 200 MM X 125 MM 2.7 MM THICK COMPLETE 134 SUPPLYING ERECTING AND MARKING DPMCB 6 A TO 32 A B SERIES 135 SUPPLYING AND ERRECTING STREET LIGHT BRACKET FOR ERECTION OF DOUBLE FITTING TUBULOR WELDED POLE WITH 40 MM DIA 1.0 M LONG B GRADE GI PIPE ALONG WITH POLE CAP OF 125 MM DIA 600 136 2 CORE CABLE 10 SQ MM ALUMINUM CONDUCTOR WITH CONTINUOS 5.48 SQ MM (12 SWG) 137 SUPPLYING AND ERRECTING COST IORN CABLE INDICATOR PLOT BURIED ALONG WITH ROUTE OF CABLE PVC XLPE ARMAUED CABLE 138 9 MTR HIGHT OCTAGONAL POLE WITH FOUNDATION BOLTS HAVING BOTTOM OF 155 MM A/F TOP 70 MM A/F PROVIDED FOUNDATION 139 GI PIPE 40 MM DIA OR 20 MM DIA GI ROD 140 2 X 4 SQM FR COPPER PVC INSULATED WIRE LAID IN PROVIDED CONDUCT AND TRACKING INSIDE POLE BUS BARS 141 GI PIPE A CLASS 40 MM DIA ERECTED FOR ENCLOSING XLPE ARMOR CABLEON WALL POLE 142 1.20 M 143 GI PIPE 2X2 144 GI PIPE Half Inch X Half Inch 145 GI PIPE 1 X 1 146 GI PIPE 1.5 X 1.5 INCH 147 GI PIPE 3 X 1.5 INCH 148 GI PIPE 3X3 149 GI PIPE 1 X 3 150GI PIPE 1X2 151 GI PIPE 2X4 152 C ANGLE 25 X 3 153 C ANGLE 50 x 5 154 C ANGLE 40 x 5 155 C ANGLE 65 x 5 156 F Strip 18 x 4 157 F Strip 30 x 5 158 F Strip 20 x 3 159 GI SEET COATING 160 CHAINLIN FENCING 161 A BEAM 100 x 50 162 C BEAM 75 x 40 163 MS PLATE 164 6 MM MS BAR 165 MS PIPE 2 166 MS PIPE 1 167 MS PIPE 0.5 168 PAVER BLOCK 60 MM 169 PAVER BLOCK 80 MM 170 Anganwadi Clothes 171 Bench 172 Handwash Stand 173 Sanitizer Stand 174 WashBashing Pot 175 E Learning instruments 176 computer 177 printer 178 TMT STEEL BAR 179 DUST BIN 180 UNDER GROUND CEMENT PIPE 181 sound system 182 water meter 183 Water connection 184 SOLAR PANNER SYSTEM 185 medical 186 GRAPHITE TANK 187 TRAY CYCLE 188 BIG COMMON DUST BIN 189 INDIVIDUAL DUSTBEEN 190 PLASTIC COLLECTION UNIT 191 100 LTR RO PLANT 192 200 LTR RO PLANT 193 500 LTR RO PLANT 194 1000 LTR RO PLANT
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
18.
Educational and Research Institute #10771129 Price Bid
Supply Of Diet, Non-Diet Items And Vegetables In The Ut Of Puducherry Supply Of Diet, Non-Diet Items And Vegetables In Respect Of Karaikal, Mahe And Yanam Regions And Egg, Sugar, Salt And Non-Diet Items For Puducherry Region , Pondicherry -Diet And Non Diet Items , Egg (Normal Size In The Egg Tray Without Spoilage And Crack And Not Less Than 50 Grams Weight) , Sugar-Breakfast Scheme , Double Fortified Salt , Phenol (Black Concentrated)-1 Ltr Bottle , Sabeena Cleaning Powder , Coconut Broomstick (Bundle Hard) , Scrubber-Metal , Life Boy Soap-125 Gms , Soap Oil , Head Caps-Disposal , Long Hand Gloves(Latex) , Bleaching Powder , Kadacloth For Kitchen Use , Karaikal Region-Diet & Non Diet Items , Boiled Rice Adt-39 , Egg (Normal Size In The Egg Tray Without Spoilage And Crack And Not Less Than 50 Grams Weight) , Sugar-Breakfast Scheme , Groundnut Oil(Svs) -15 Kg , Gingelly Oil (Agmark)-15Kg , Roasted Peanut , Cumin Seeds , Rasam Powder , Masla Chilly Powder(Branded) , Sambar Podi(Branded) , Toor Dhall , Tamarind , Dry Chilly-Long , Dry Chilly-Round , White Gram Dhall(Urid Split) , Mustard , Turmeric Powder(Branded) , Garlic , Double Fortified Salt , Asafoetida Cake , Asafoetida Powder , Sombu , Pattai , Cloves , Bay Leaf , Black Bengal Gram , Bengal Gram Dhall , Coriander , Fenugreek , Moong Dal , Cane Jagerry , Cardamon , Ghee , Cashewnut-Broken , Green Raisins (Dry Grapes) , Pepper , Meal Maker , Green Peas Dry , Vadagam , Briyani Masala , Phenol (Black Concentrated)1 Ltr Bottle , Sabeena Cleaning Powder , Coconut Broomstick (Bundle Hard) , Scrubber-Metal , Life Boy Soap(125 Gms) , Bleaching Powder , Soap Oil , Dish Wash Bar-200Gm , Combat Shoes , Head Caps Disposable , Long Hand Gloves(Latex ) , Apron , Uniform Overcoat-Blue , Kadacloth For Kitchen Use , Dust Bin 20 Ltr , Karaikal Region-Vegetables , Potato-Bengaluru , Yam , Raw Banana , Carrot , Onion-Bellary , Tomato , Green Chilly , Brinjal , Cabbage , Chow Chow , Knool-Khal , Drumstick (Seasonal) , Raw Mango (Seasonal)(Ottu Mango) , Pumpkin (Seasonal)(Disco) , Ladies Finger , Radish (White) , Beans , Ginger , Beetroot , Curry Leaves , Mint Leaf , Coriander Leaves , Coconut-Big Size , Snake Gourd , Sweet Potato , Maheregion-Diet & Non Diet Items , Boiled Rice Adt-39 , Egg (Normal Size In The Egg Tray Without Spoilage And Crack And Not Less Than 50 Grams Weight) , Sugar -Breaksfast Scheme , Coconut Oil-Edible (Branded)-15 Ltr , Sambar Podi (Branded) , Toor Dhall , Masala Chilly Powder (Branded ) , Tamarind , Dry Chilly-Long , Dry Chilly-Round , Mustard , Tumeric Raw , Turmeric Powder (Branded) , Garlic , Double Fortified Salt , Asafoetida-Cake , Bengal Gram Dhall , Coriander , Fenugreek , Red Cow Pea , Green Gram Dhall , Cumin Seed , Masala Curry Powder (Branded) , Sameeya (Vermicelli) , Sugar-For Payasam , Cardamon , Cashewnut-Broken , Green Raisins(Dry Grapes) , Sombu , Pattai , Cloves , Milk Maid(1 Tin-100Gm ) , Phenol (Black Concentrated) - 1 Ltr , Sabeena Cleaning Powder , Coconut Broomstick (Bundle Hard) , Scrubber-Metal , Life Boy Soap(125 Gms) , Bleaching Powder , Soap Oil , Dish Wash Bar-200 Gm , Head Caps , Long Hand Gloves(Latex) , Apron , Dust Bin 20 Ltr , Kadacloth For Kitchen Use , Maheregion-Vegetables , Potato , Yam , Carrot , Onion-Bellary , Tomato , Green Chilly , Brinjal , Drumstick (Seasonal) , Pumpkin (Seasonal) , Ladies Finger , Ginger , Curry Leaves , Coconut-Big Size , Beetroot , Cucumber , Ash Gourd , Sweet Potato , Yanam- Diet & Non Diet Items , Boiled Rice Adt-39 , Egg (Normal Size In The Egg Tray Without Spoilage And Crack And Not Less Than 50 Grams Weight) , Sugar -Breaksfast Scheme , Groundnut Oil-Svs -15 Kg , Masla Chilly Powder(Branded) , Toor Dhall , Tamarind , Dry Chilly-Long , Dry Chilly-Round , White Gram Dhall(Urid Split) , Mustard , Turmeric Powder , Garlic , Double Fortified Salt , Bengal Gram Dhall , Moong Dal , Cane -Jagerry , Cardamon , Ghee , Cashewnut-Broken , Phenol (Black Concentrated)-1 Ltr Bottle , Sabeena Cleaning Powder , Coconut Broomstick (Bundle Hard) , Scrubber-Metal , Life Boy Soap-125 Gms , Bleaching Powder , Soap Oil , Dish Wash Bar-200 Gm , Combat Shoes , Head Caps , Long Hand Gloves(Latex) , Apron , Dust Bin 20 Ltr , Kadacloth For Kitchen Use , Yanam-Vegetables , Potato , Yam , Raw Banana , Carrot , Onion-Bellary , Tomato , Green Chilly , Brinjal , Cabbage , Drumstick (Seasonal) , Raw Mango (Seasonal) (Ottu Mango) , Pumpkin (Seasonal) (Disco) , Ladies Finger , Radish (White) , Ginger , Curry Leaves , Mature Coconuts , Beetroot , Cucumber , Coriander Leaves , Bottle Gourd , Green Peas , Cauliflower-Medium , Ivy Guard( Coccinia) Kovaikkai , Sweet Potato , Broadbeans
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
19.
Public Administrative Department #10743599 AOC
Rate Contract For Group No12, General Items. Tender For The Supplies Of Drugs And Pharmaceuticals, Labchemicals, X Ray Films And Chemicals, Surgicalsutures And Dressings, Vaccines, Sera Etc. And General Items For The Year 2023 25. , Diaper: Adult Diaper Large Size With Good Absorption , Diaper: Adult Diaper Medium Size With Good Absorption , Aneroid Bp Appartus With Adult Cuff: Aneroid Dial Bp Appartus Of Isi Mark With Case , With Stand , Aneroid Bp Appartusfor Pediatric Use: Aneroid Sphygmomanometer With Cuff Size 10.5-12 Cm. Of Isi/Ce Mark With Case. , Aneroid Bp Appartusfor Pediatric Use: Aneroid Sphygmomanometer With Cuff Size 6-8 Cm.Of Isi/Ce Mark With Case. , Aneroid Bp Appartusfor Pediatric Use: Aneroid Sphygmomanometer With Cuff Size 8.25-10 Cm. Of Isi/Ce Mark With Case. , Bmw: Bio-Waste Disposable Poly Bags, Size 14 X 18 Inch, Non Chlorinated, Thickness-- At Least 120?, Made From 100% Virgin Plastic Granules, With Sealing System. Bottom Of The Bag Needs To Have A Double Seal To Prevent Leakage. 1.Yellow Bags– Made Of Low Density Polyethylene(Ldp) 2.Red Bags -- Made Of Poly Propylene(Pp).Each Plastic Bag Must Bearbiohazard Symbol On Front And Back. Label &Markings-- Name & Registration No. Of The Manufacturer , Thickness Of The Bag And Type Of Material. Printed In Black Ink Free From Heavy Metal , Bmw: Bio-Waste Disposable Poly Bags, Size 24X28 Inch, Non Chlorinated, Thickness-- At Least 120?, Made From 100% Virgin Plastic Granules, With Sealing System. Bottom Of The Bag Needs To Have A Double Seal To Prevent Leakage. 1.Yellowbags– Made Of Low Densitypolyethylene(Ldp) 2.Red Bags -- Made Of Poly Propylene(Pp). Each Plastic Bag Must Bearbiohazard Symbol On Front And Back. Label &Markings-- Name &Registration No Of The Manufacturer,Thickness Of The Bag And Type Of Material. Printed In Black Ink Free From Heavy Metal , Bmw: Bio-Waste Disposable Poly Bags, Size 36X36 Inch, Non Chlorinated, Thickness-- At Least 120?, Made From 100% Virgin Plastic Granules, With Sealing System. Bottom Of The Bag Needs To Have A Double Seal To Prevent Leakage. 1.Yellowbags– Made Of Low Density Polyethylene(Ldp) 2.Red Bags -- Made Of Poly Propylene(Pp).Each Plastic Bag Must Bearbiohazard Symbol On Front And Back. Label &Markings-- Name &Registration No Of The Manufacturer,Thickness Of The Bag And Type Of Material. Printed In Black Ink Free From Heavy Metal , Bmw: Bio-Waste Disposable Poly Bags, Size 36X40 Inch, Non Chlorinated, Thickness-- At Least 120?, Made From 100% Virgin Plastic Granules, With Sealing System. Bottom Of The Bag Needs To Have A Double Seal To Prevent Leakage..Yellowbags– Made Of Low Density Polyethylene(Ldp).2.Red Bags -- Made Of Poly Propylene(Pp).Each Plastic Bag Must Bearbiohazardsymbol On Front And Back. Label &Markings-- Name &Registration No Of The Manufacturer,Thickness Of The Bag And Type Of Material. Printed In Black Ink Free From Heavy Metal , Bmw: Bio-Waste Disposable Poly Bags, Size18x20 Inch, Non Chlorinated, Thickness-- At Least120µ, Made From 100% Virgin Plastic Granules, With Sealing System. Bottom Of The Bag Needs To Have A Double Seal To Prevent Leakage. 1.Yellowbags– Made Of Low Density Polyethylene(Ldp) 2.Red Bags -- Made Of Poly Propylene(Pp). Each Plastic Bag Must Bearbiohazard Symbol On Front And Back.Label &Markings-- Name &Registration No Of The Manufacturer,Thickness Of The Bag And Type Of Material. Printed In Black Ink Free From Heavy Metal. , Sanitation Poly Bag (Blue): Blue Polybag Of Size24 X 28 Thickness At Least 120 Micron, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage With Label Of Recycle , Sanitation Poly Bag (Blue): Blue Polybag Of Size36 X 40 Thickness At Least 120 Micron, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage With Label Of Recycle , Sanitation Poly Bag (Blue): Blue Polybag Of Size 14 X 18 Thickness At Least 120 Micron, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage With Label Of Recycle , Sanitation Poly Bag (Blue): Blue Polybag Of Size 18 X 20 Thickness At Least 120 Micron, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage With Label Of Recycle , Sanitation Poly Bag (Blue): Blue Polybag Of Size 36 X 36 Thickness At Least 120 Micron, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage With Label Of Recycle , Cloth: Blue Terricot Width 1 Meter , Bmw: Bmw Collection Container For Two Joint Bins (Yellow And Red) Having Capacity 20 Ltr. With Foot Operated Stand Top Covered, Puncture Proof, Leak Proof, Tamper Proof Non- Chlorinated In Nature. Made Of High Density Poly Ethylene (Hdpe) With Bio- Hazard Symbol On Both Sides (Front And Back) , Bmw: Bmw Collection Container For Two Joint Bins (Yellow And Red) Having Capacity 40 Ltr. With Foot Operated Stand Top Covered, Puncture Proof, Leak Proof, Tamper Proof Non- Chlorinated In Nature. Made Of High Density Poly Ethylene (Hdpe) With Bio- Hazard Symbol On Both Sides (Front And Back) , Bmw: Bmw Collection Container For Two Joint Bins (Yellow And Red) Having Capacity 60 Ltr. With Foot Operated Stand Top Covered, Puncture Proof, Leak Proof, Tamper Proof Non- Chlorinated In Nature. Made Of High Density Poly Ethylene (Hdpe) With Bio- Hazard Symbol On Both Sides (Front And Back) , Bp Apparatus Led Type: Bp Apparatus Led Type , Broom: Broom (Hard) Tilli With Stick, Weight Approx. 2 Kg And Length Of Stick Should Be 5 Feet , Broom: Broom (Hard) Tilli, Weight 600 Gm , Broom: Broom (Soft) Phool, Weight 500 Gm , Bucket: Bucket (Plastic) 20 Litre Capacity With Plastic Handle , Cloth: Cadaver Bags Disposable Dead Body Cover, 1. Large Size, 2. Central Open & Closed Fitted By Long Zip, 3. Water Proof Sheet, Width 1 Meter , Soda: Caustic Soda , Tab: Chlorine Releasing Disp. Tab For Disinfecting Floor Table / Fomites Like Clean -N- Sept- Or Equiv. Tab (Sodium Dichloride Isocyanacnate Tab. 10000Pps , Powder: Cleaning Powder 1 Kg (Reputed Brand ) , Cloth: Coffin Cloth - White (Width 1 Meter) , Baby Sheets: Cotton Reusable Neonatal , Steel Jar: Cylindrical Steel Jars Large & Medium For Instrument. , Soap: Detergent Cake/Washing Soap 250 Gm , Powder: Detergent Powder 1 Kg , Diamond Pencil: Diamond Pencil , Thermo Meter: Digital Clinical Thermometer Isi/Ce/Fda , Weighing Machine : Digital Weighing Machine, Inkg , Bmw: Double Jacket Bucket For Hyprochlorite Solution - Disinfection Of Used Syringes Etc(10 Ltrs) , Sheet: Drawer Sheets White Cotton , Bucket: Dustbin (Plastic) 10 Litre Capacity, Having Holding Capacity 10 Litre , Duster: Duster White 60 Cm. X 60 Cm. , Insect Killer: Electric Flying Insect Killer (2 Tube) Small 12 X 12 , Duster: Flannel Duster, Chief Yellow (60X60 Cm.) , Brush: Floor Cleaning Brush ( Height Three Feet) , Mop: Floor Cleaning Mop,30X30 Inch Of Good Absorbant , Glass Cleaner: Glass Cleaner With Spray Pump , Glass Marking Colour Pencils: Glass Marking Colour Pencils , Tumbler: Glass Tumbler (Minimum 200Ml.) , Gown: Gown Full Sleeve, Colour Green/Blue/Pink (SizeLarge/Medium/Small , Gown: Gown Half Sleeve, Colour Green/Blue/Pink (SizeLarge/Medium/Small) , Cloth: Green Dasuti (Cotton) For O.T. (Width 1 Meter) , Kurta: Green Kurta Peticoat (Small, Medium & Large Size) , Sanitation Poly Bag (Green): Green Polybag Of Size 14 X 18, Thickness Criteria Are Not Required, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage,Label And Marking Of Name And Registration No. Of Manufacturer, Type Of Material, Label Of Compostable Plastic , Sanitation Poly Bag (Green): Green Polybag Of Size 18 X 20, Thickness Criteria Are Not Required, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage,Label And Marking Of Name And Registration No. Of Manufacturer, Type Of Material, Label Of Compostable Plastic , Sanitation Poly Bag (Green): Green Polybag Of Size 24 X 28, Thickness Criteria Are Not Required, Non Chlorinated, Sealing System, Bottom Of The Bag Needs To Have Double Seal Toprevent Bottom Leakage,Label And Marking Of Name And Registration No. Of Manufacturer, Type Of Material, Label Of Compostable Plastic , Soap: Hand Wash Soap 125 Gm , Tags: Identification Tags Adult Made Of Vinyl Plastic With One Time Lock , Tags: Identification Tags Baby Made Of Vinyl Plastic With One Time Lock , Jug : Jug (Plastic) 2 Litre Capacity (Reputed Brand) , Kurta Pajama: Kurta Pajama (Small, Medium & Large Size) , Cloth: L.P. Sheet (White Cotton) 100 Cm. X 100 Cm. With 15 Cm. Central Eye , Bed Sheet: Light Blue Terrycot Bed Sheet Having Size 255 Cm X 155 Cm With Shirakh Margin Of 6 Cm With Mcd Weaved In The Middle All Along With Red Colour Thread , Powder: Lime Powder (Chunna)50 Kg Pack , Liquid : Liquid Floor Cleaner (Teepal Type) , Floor Cleaner: Liquid Floor Cleaner Strolling Type For Fresh Smell Repufloor Polish Reputed Brandted Brand , Soap: Liquid Hand Wash Soap 250 Ml , Soap: Liquid Hand Wash Soap One Litre,Refill Pack , Locks: Locks 45 Mm With 3 Keys , Locks: Locks 65 Mm With 3 Keys , Luggage Troley: Luggage Trolley , Needle Destroyer: Manual Needle Destroyer With Syringe Hub Cutter, With Stainless Steel Stand & Handle ,Non Electrical - Size 1Ltr. Having Temporary & Permanent Closure Facility , As Per Bmw Rules 2016 & Amendment Rules 2018-19 , Needle Destroyer: Manual Needle Destroyer With Syringe Hub Cutter, With Stainless Steel Stand & Handle ,Non Electrical - Size 3Ltrs. Having Temporary & Permanent Closure Facility , As Per Bmw Rules 2016 & Amendment Rules 2018-19 , Marker Pen With Fine Tip: Marker Pen With Fine Tip , Mattress: Mattress With Cover For Trolleys & Examination Table (Rubberised) , Jug: Mayur Jug 10 Litre , Tray: Medical Grade Plastic Tray With Lidsize 30X5.5X5inch , Mosquetto Repellant: Mosquetto Repellant 45 Nights + Vapouriser (Combo Pack) (Reputed Brand) , Mosquetto Repellant: Mosquito Repellant Cream ( 50 Gm) , Mosquetto Repellant: Mosquito Repellant Refill Pack For 60 Days , Mosquito Repellant: Mosquito Repellant Vapouriser With Refill , Eyedrops: Moxifloxacin0.5% + Dexamethasone(0.1%) Eyedrops , Mug: Mug (Plastic) 750 Ml. Capacity, Having Holding Capacity 750 Ml (Reputed Brand) , Pills: Naphthalline Balls , Bmw: Needle Destroyer With Syringe Cutter (Holding Capacity 500 Ml Or More) With Warranty Of One Year , Powder: Neel (Blue) 1 Kg , Diaper: Neonatal Diaper Medium Size With Good Absorption , Diaper: Neonatal Diaper Small Size With Good Absorption , Eyedrops: Olopatadine (0.2%) , Cloth: Perineal Sheet, White Cotton, 150 Cm. Square With Central Eye 30 Cm. Oval. , Liquid: Phenyl Isi Mark,Rwc Not < 5 , Pillow: Pillow 27Inch X 16 Cotton , Powder: Plaster Of Paris I.P. , Apron: Plastic Apron , Plastic Container 500 Ml: Plastic Container 500 Ml , Torch: Plastic L.E.D. Torch For Three Aa Batteries, With Double Switch , Slippers: Plastic Slippers (Size 6-9) , Bmw: Puncture Proof Disposable, Translucent, Leak Proof, Temper Proof With Barcode And Bio Hazard Sticker With Temporary And Permanent Lock System Sharp Waste Collector 1 Ltr. , Bmw: Puncture Proof Disposable, Translucent, Leak Proof, Temper Proof With Barcode And Bio Hazard Sticker With Temporary And Permanent Lock System Sharp Waste Collector 3 Ltr. , Bmw: Puncture Proof Disposable, Translucent, Leak Proof, Temper Proof With Barcode And Bio Hazard Sticker With Temporary And Permanent Lock System Sharp Waste Collector 3 Ltr. , Bmw: Puncture Proof Disposable, Translucent, Leak Proof, Temper Proof With Barcode And Bio Hazard Sticker With Temporary And Permanent Lock System Sharp Waste Collector 500Ml. , Bmw: Puncture Proof Sharp Waste Collector 250Ml , Rat Trap: Rat Trap , Cover: Rexine Cover Of Mattress Good Quality To Fit In 72 Inchx36 Inch X4 Inch Mattress , Freshner: Room/Toilet Freshner (Like Odonil) , Bmw: Rubber Gloves (Heavy Duty) Sizes 6, 6.5, 7.5 , Mattress: Rubberised Baby Coir Mattress Having Size 60X36X4, Rexine Cover With Isi/Bis Mark , Mattress: Rubberised Coir Mattress Having Size 72X36X4, Rexine Cover With Isi/Bis Mark , Bmw: Sharp Container With Syringe/Needle Cutter (Not Electric-Manual) , Cell: Small Cell/Battery (Aaa Size) , Soda Ash: Soda Ash , Eyedrops: Sodium Hyaluronate (0.18%) , Drum: Solid Waste Collection Container For Two Joint Bins(Blue And Green) Having Capacity 20 Ltr. With Foot Operated Stand, Top Covered, Puncture Proof,Leak Proof, Tamperproof,Non - Chlorinated In Nature. Made Of High Density Poly Ethylene (Hdpe) , Drum: Solid Waste Collection Container For Two Joint Bins(Blue And Green) Having Capacity 40 Ltr. With Foot Operated Stand, Top Covered, Puncture Proof,Leak Proof, Tamperproof,Non - Chlorinated In Nature. Made Of High Density Poly Ethylene (Hdpe) , Drum: Solid Waste Collection Container For Two Joint Bins(Blue And Green) Having Capacity 60 Ltr. With Foot Operated Stand, Top Covered, Puncture Proof,Leak Proof, Tamperproof,Non - Chlorinated In Nature. Made Of High Density Poly Ethylene (Hdpe) , Stick: Spider Web Cleaner With 10 Feet Long Stick , Tray: Stainless Steel Tray (12X10X1.5) , Steel Tray: Steel Tray With Cover Large , Steel Tray : Steel Tray With Cover Medium , Steel Tray: Steel Tray With Cover Small, , Stethoscope: Stethoscope Isi Mark , Sticker: Sticker With Bio- Hazard Symbol Size 3X3 , Eye Drops: Sulphacetamide Eye Drops 12% +Zn + Boric Acid , Wiper: Sweeping Wiper, Standard Size (Stick 3 Feet Blade 16 Inch) , Thermal Paper: Thermal Paper For Ultrasound Thermal Printer , Brush: Tiolet Brush , Tissue Paper Roll - Double Layer 8 Meter Length: Tissue Paper Roll - Double Layer 8 Meter Length , Paper Rolls: Tissue Paper Rolls (2 Ply X 100 Mtr.) , Lotion: Toilet Cleaner Lotion 750 Ml. , Una: Toilet Juna Steel Size 20Gm , Cell: Torch Cell (Battery) Large Size , Cell: Torch Cell (Battery) Medium Size , Cell: Torch Cell (Battery) Pencil Size (Aa) , Towel: Towel (Hand) 16X27 , Towel: Towel 27X54 , Eyedrops: Travoprost (0.004%) , Jelly: Ultra Sound / Ecg Jelly: In Plastic Collapsible Bottle (Neutral Ph.) , Urinal Cube : Urinal Cube , Soap: Washing Chips , Bed Sheet: White Cotton Bed Sheet Having Size 255Cm X 155Cmwith Shirakh Margin Of 15Cm With Mcd Weaved In The Middle All Along With Red Colour Thread , Cover: White Cotton Pillow Covers 30X18 , Cloth: White Dasuti (Width 1 Meter) , Floor Cleaner: White Disinfectant Fluid (Floor Cleaner) , Cloth: White Terricot Non Dying Cloth Apron Full Sleeve , Bed Sheet: White Terrycot Bed Sheet Having Size 255Cm X 155Cmwith Shirakh Margin Of 6Cm With Mcd Weaved In The Middle All Along With Red Colour Thread , Cloth: Woolen Blanket (Weight 2 Kg, Having Size 90 X 60) With Municipal Corporation Of Delhi Weaved On Selvages (Colour Blue/Green/Red)
Contract Date: Apr 29, 2026 Contract Value : 58,976
Local Bodies No of Bidders 18
20.
Public Administrative Department #10730816 Price Bid
Proposed Furniture Work At Kusumagraj Smarak In P.No.12 Nashik West Division.-1 COLLECTION counter Providing & fixing COLLECTION counter as per design of 0.9 m width & 1.2 in height with drawers above in 19mm thk. waterproof ply for frames, sliders & drawer facia,6mm thk. plywood for back & drawer bottoms with 12mm plywood for drawers, drawer side with bte lipping to all exposed edges of plywood including 1.mm thk. Laminate on top & 1mm thk laminate on sides & front of drawer facia & sliding shutters with necessary tower bolts castors handles, locks,etc.complete.with oil paint to all exposed surfaces of ply & lipping. Additional item Spec. no. as directed by Spec.No.: RA 22-23 A GROUND FLOOR 2 Providing and fixing vertical/roller blindes for window as approved by engineer in charge and architect GEM ID - 5116877-93262266948 Spec.No.: QUOTATION ATTACHED A GROUND FLOOR 3 GODREJ -ENTERPRIES TABLE 1200X600 X750 Enterprise 1200 Table without CPU Hanger size shall be 1200 Width mm x 600 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Spec.No.: AS PER QUTATION A GROUND FLOOR 4 GODREJ MAKE REVOVING CHAIR THRILL FULL BACK 1. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area .The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are *HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) *FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features · Up-Down adjustment- 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. 4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment 5. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 6. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). 7. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 113.5-123.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM. Spec.No.: AS PER QUTATION A GROUND FLOOR 5 GODREJ MAKE RELFEX CHAIRS WITH STACKEBALE TYPE 4 METAL LEG . SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholstery in product catalog). * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. 3. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm andØ1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. Desk let support frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and welded to mainframe. Spec.No.: AS PER QUTATION A GROUND FLOOR 6 GODREJ MAKE GAIN 8 FT HIGHT GLASS DOOR BOOK RACK- 2325 H x 900 W x 450 D GAIN PRO STORAGE (BOOK RACK) 2325 H x 900 W x 450 D EACH UNIT SIZE Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage.(Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered)Legs fitted with screw type leveler.Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 450W/600W and 0.8mm CRCA for 900W/1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS-513Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock -3 Way locking provision. Click action mechanism. #NAME? positions. Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).Material to be supplied by certified ISO 50001:2018, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 13485:2016, AIOTA member. Item should have at least one of the GRIHA/GREENGAURD/GREENPRO/ GREEN ASSURANCE Certifications adhering to standard environmental practices. Valid test certificate should be available for the item under consideration. Also, OEM must have dedicated toll free service number. Spec.No.: AS PER QUTAION A GROUND FLOOR 7 UPBEAT Discussion Table without wire manager-Size-900 Dia.750H MM Upbeat is a Complete office Furniture setup solution, designed to cater to the various settings in an office space.19mm thick both sided laminated MDF top Metal leg with epoxy powder coating Spec.No.: AS PER QUTATION A GROUND FLOOR 8 Excavation for foundation in earth, soil of all types, sand,gravel and soft murum, including removing the excavatedmaterial up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.5 m.) By Mechanical Means Spec.No.: Bd.A.1 PageNo. 259 I.NO 21.0 2 A GROUND FLOOR 9 Excavation for foundation in hard murum includingremoving the excavated material upto distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming,watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No.: Bd.A.2 PageNo.269 I NO 21.0 6 A GROUND FLOOR 10 Filling in plinth and floors with Contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec.No.: Bd.A.11 Page 253 21.37 A GROUND FLOOR 11 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Spec.No.: Bd.A. 12 PAGE 254 21.38 A GROUND FLOOR 12 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.E.4 Page No. 289 and B-7, Page No.38 I.NO.24.08 A GROUND FLOOR 13 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.6 Page No. 300 and B.7, Page No.38 I.NO.25.50 A GROUND FLOOR 14 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering,ormwork, cover blocks,laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.8 Page No. 302 and B.7, Page No.38 I.NO.25.70 A GROUND FLOOR 15 Providing and laying Cast in situ/Ready Mixcement concrete M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/Concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.9 Page No. 303 and B.7, Page No.38 I.NO.26.05 A GROUND FLOOR 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd. F. 12 Page No. 304 and B -7, Pg 38 I.NO.26.23 A GROUND FLOOR 17 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps,footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No.: Bd.F.17, Page No.306 I.NO.26 0.33 A GROUND FLOOR 18 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec.No.: As director by engineer in c harge and BDG- 2 and 5 I.NO.27.12 A GROUND FLOOR 19 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec.No.: As director by engineer inch arge and BDG- 2 and 5 I.NO.27.13 A GROUND FLOOR 20 Providing uncoursed rubble masonry of trap / granite /quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete. Spec.No.: Bd.H.1 Page No.329 I.NO.28.0 1 A GROUND FLOOR 21 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec.No.: As directed by Engineer in c harge. I.NO. 31.04 A GROUND FLOOR 22 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. Spec.No.: Bd. L.2 Page No. 368 I.NO.32 0.03 A GROUND FLOOR 23 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec.No.: Bd.L.7 Page No. 369 I.NO.32. 11 A GROUND FLOOR 24 Providing neeru finish to plastered surfaces in all positions including. Spec.No.: Bd. L.10, Page 370 I NO. 32. 15 A GROUND FLOOR 25 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. Spec.No.: Bd.M. 12 Page No.385 I.NO.33 0.42 A GROUND FLOOR 26 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Spec.No.: Bd.M. 12 Page No.385 I.NO.33 0.43 A GROUND FLOOR 27 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Spec.No.: As directed by Engineer in c harge. I.NO.35.25 A GROUND FLOOR 28 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Spec.No.: Bd.P.6 Page No. 414 I.NO.36. 12 A GROUND FLOOR 29 Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kgs/M2 and minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Spec.No.: As directed by Engineer in c harge. I.NO.38.45 A GROUND FLOOR 30 Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec.No.: As directed by Engineer inch arge. I.NO.39.02 A GROUND FLOOR 31 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. Spec.No.: BD-T-53 Page No. 509 As dire cted by Engineer in charge I.NO.39.29 A GROUND FLOOR 32 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . Spec.No.: As directed by Engineer in c harge. i. no.39.56 A GROUND FLOOR 33 Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. Spec.No.: As directed by Engineer in c harge. i. no.39.82 A GROUND FLOOR 34 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec.No.: Bd.V.8 Page No. 554 I.NO.41. 400 A GROUND FLOOR 35 Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. Spec.No.: Bd.V.9 Page No. 555 I. NO.41 0.48 A GROUND FLOOR 36 Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete. Spec.No.: Bd.V.14 Page No. 557 I.NO.41 0.52 A GROUND FLOOR 37 Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe. Spec.No.: Bd.V.23 Page No. 562 I. NO.4 1.57 A GROUND FLOOR 38 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Spec.No.: Bd.V.30 Page No. 565 I. NO.4 1.63 A GROUND FLOOR 39 Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and Spec.No.: BdV41 PAGE NO 573 I NO 42.07 0 A GROUND FLOOR 40 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete. Spec.No.: Bd.V.43,Page No.574 I.NO.42. A GROUND FLOOR 41 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Spec.No.: As directed by Engineer inch arge. I.NO.42.200 A GROUND FLOOR 42 Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. Spec.No.: As directed by Engineer in c harge. I.NO.42.320 A GROUND FLOOR 43 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.: BD.V 5 page 551 and as direc ted by Engineer in charge I.NO.42.550 A GROUND FLOOR 44 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.: BD.V 5 page 551 and as direc ted byEngineer in charge I.NO.42.580 A GROUND FLOOR 45 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec.No.: BD.V 5 page 551 and as direc ted by Engineer in charge I.NO.42.600 A GROUND FLOOR 46 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Spec.No.: BD.V 32 A page 551 and as di rected by Engineer in charge I.NO.42.670 0 A GROUND FLOOR 47 Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. Spec.No.: As directed by Engineer Inch arge I.NO.42.860 A GROUND FLOOR 48 CARTING UN WANTED MATERIAL FROM SITE UP TO 5 KM Spec.No.: AS DIRECTED (LEAD CHRGES FOR 5 KM) A GROUND FLOOR 49 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. Spec.No.: As directed by Engineer inch arge. I.NO.46.090 A GROUND FLOOR PART B (ELECTRICAL) 1 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories (PWD DSR 2023-24, 1-7-18) 2 Point wiring for ceiling fan in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories (PWD DSR 2023-24, 1-7- 19) 3 Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories (PWD DSR 2023-24, 1- 7-20) 4 Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories (PWD DSR 2022-23, 1-7-25) 5 Providing and fixing PVC trunking (PVC casing-ncapping) of size 25 mm with accessories on wall/ceiling (PWD DSR 2023-24, 1-2-7) 6 Providing and fixing HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling (PWD DSR 2023-24, 1-2-4) 7 Concealing of provided G.I. pipe/H.G. screwed conduit/PVC pipe in wall/floor/false ceiling (PWD DSR 2023-24, 1-1-13) 8 Providing and fixing mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking (PWD DSR 2023-24, 3-1) 9 Providing and fixing mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking (PWD DSR 2023-24, 3-2) 10 Providing and fixing mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking (PWD DSR 2023-24, 3-3) 11 Providing and fixing LED 22W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete (PWD Elec 2023-24, 2-1-18). 12 Providing and fixing LED square / circular Max. W down lighter / Panel Light having pressure diecast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens,(PWD DSR 2023-24, 2-1-5) 13 Providing and fixing LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, etc complete (PWD DSR 2023-24, 2-1-5) 14 Providing and fixing Ceiling fan 230 V A.C. 50 cycles 1400 mm etc complete (PWD DSR 2023- 24, 2-9-3) 15 Providing and fixing modular type electronic step regulator for fan etc complete. (PWD DSR 2023- 24, 2-10-9) 16 Providing and fixing fan clamp of 30 x 5 mm. M. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. (PWD DSR 2023-24, 2-10- 3) 17 Providing and fixing ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected (PWD DSR 2023-24, 2-10-6) 18 Providing and fixing bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator (PWD DSR 2023-24, 2-9- 19 Providing and fixing exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials (PWD DSR 2023-24, 2-9- 13) 20 Providing, fixing and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board (PWD DSR 2023-24, 5-3-3) 21 Providing, fixing and marking DPMCB 40A to 63A, B- series (for lighting) in provided distribution board (PWD DSR 2023-24, 5-3-9) 22 Providing, fixing single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs (PWD DSR 2023-24, 5-4-7) 23 Providing and fixing single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, (PWD DSR 2023-24, 5-4-9) 24 Providing, fixing testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete (PWD DSR 2023-24, 3-2-9) 25 Providing, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete(PWD DSR 2023-24, 3-2-13) 26 Providing and fixing PVC insulated PVC round sheathed 2.5 sq.mm 3 core flexible multi stranded copper Industrial cable for voltage grade up to kV (PWD DSR 2023-24, 1-3-15) 27 Providing and fixing copper pipe suitable for refrigeration system having size 12 mm complete. (PWD DSR 2023-24, 3-2-26) 28 Providing and fixing bracket for split type AC 29 Providing and fixing copper pipe suitable for refrigeration system having size 16 mm complete. (PWD DSR 2023-24, 3-2-27) 30 Providing and fixing Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 12 mm (PWD DSR 2023-24, 4-2-3) 31 Providing and fixing Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 16 mm (PWD DSR 2023-24, 4-2-4) 32 Providing and fixing rigid PVC pipe 20 mm dia.with PVC accessories for drain (PWD DSR 2023-24, 1-2-3) 33 Providing and fixing meter box with all accessories complete. 34 Providing, laying and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe (PWD DSR 2023-24, 7-1-28) 35 Providing, fixing and testing earthing with galvanised iron earth plate size 60 x 60 x 0.6 cm complete with all accessories of GI materials and recording the results (PWD DSR 2023-24, 9-1-1) 36 Providing and fixing GI earth wire of high purity of different sizes used for earthing. (PWD DSR 2023- 24, 9-2-5)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
Maharashtra View Result →
22.
Defence #10704812 Price Bid
Dmd / Psu / Rfp-13 / 2021-22 Dt 09 Nov 2021 Procurement Of Psu Items Through Single Tendering Acton , Lv7 / Av-15 153984Head Km 6 Stn 027421 , Lv7 / T-815 ( 8X8 ) 442-071-820-384Gear Shift Booster , Lv7 / T-815 ( 8X8 ) 130-075-062-404Rope , Lv7 / T-815 ( Hmv ) 442-954-165-984Side Gasket 548Mm , Lv7 / T-815 ( Hmv ) 273-110-014-354Sealing Ring 70X3 Csn 02 9281.2 , Lv7 / T-815 ( 4X4 ) 443-655-111-000Hose Dn 11X630 Dkl Dkl Din 74310 , Lv7 / T-815 ( 4X4 ) 206-360-000-000 Shaft Sealing Ring Gp 160X190x1.5 Sm 40-235 Csn 02 9401.0 , Lv7 / T-815 ( 8X8 ) 3020 015679Constant Mesh Gear H , Lv7 / T-815 ( 8X8 ) 273-525-003-717Shaft Sealing Gufero Gp 58X80x13 Csn 02 9401.0 , Lv7 / T-815 ( 8X8 ) 3110 108862Ball Brg Ntn 6209 / Skf 6209 , Lv7 / T-815 ( 8X8 ) 130-071-510-094Flexible Member , Lv7 / T-815 ( 8X8 ) 3040 022462Drive Shaft , Lv7 / T-815 ( 8X8 ) 442-051-190-624 Distance Washer , Lv7 / T-815 ( 8X8 ) 442-953-180-084 Hose Dia5x8-400 Mm , Lv7 / T-815 ( 8X8 ) 990-500-056-000 Gasket , Lv7 / T-815 ( 8X8 ) 442-954-161-044 Window Frame Lh , Lv7 / T-815 ( 8X8 ) 443-612-386-001 Connecting Head , Lv7 / T-815 ( 8X8 ) 443-825-017-800 Ash Tray , Lv7 / T-815 ( 8X8 ) 442-954-163-824 Front Gasket 1400 Mm , Lv7 / T-815 ( 8X8 ) 442-954-161-064Window Frame Rh , Lv7 / T-815 ( 8X8 ) 442-978-800-064Holder , Lv7 / T-815 130-016-600-514 Connecting Sleeve I-R , Lv7 / T-815 130-075-720-834 Suspension Yoke R.H. , Lv7 / T-815 130-953-120-204 Connecting Hose Dia 48 , 520 Mm , Lv7 / T-815 130-050-070-084 Gear Shift Fork Pin , Lv7 / T-815 130-020-850-064 Adjusting Nut , Lv7 / T-815 130-016-600-684 Connecting Sleeve , Lv7 / T-815 130-020-420-254 Sattelite Housing , Lv7 / T-815 130-054-240-054 Sealing Ring 13.5X5 , Lv7 / T-815 130-046-900-024 Protective Bag , Lv7 / T-815 130-016-790-624 Synchromesh Cone Ii , Lv7 / T-815 130-054-391-484 Dust Seal , Lv7 / T-815 131-858-021-022 Pin Coupler , Lv7 / T-815 130-053-650-654 Straight Coupling , Lv7 / T-815 ( 8X8 ) 3130 000876Roller Ii 3X23.8 , Lv7 / T-815 ( 8X8 ) 130-054-391-304Dilatation Bag , Lv7 / T-815 ( Hmv ) 109-419-420-320Sealing Ring 14X1815:3175-74Cu , Lv7 / T-815 ( Hmv ) 311-901-318-000Sealing Ring 18X24 Csn 029310.2 , Lv7 / T-815 ( Hmv ) 442-054-391-604Coupling Of Pipes , Lv7 / T-815 ( Hmv ) 443-612-166-000 Closing Cock , Lv7 / T-815 ( Hmv ) 443-654-170-000 Hose Fbe Dn 12X160 Dkl-Dkl , Lv7 / T-815 ( Hmv ) 128-115-107-828Adopter A-160 , Lv7 / T-815 ( Hmv ) 442-054-171-024 Sealing Ring 130X3 , Lv7 / T-815 ( 4X4 ) 130-886-910-024 Rope , Lv7 / T-815 ( 4X4 ) 273-521-291-000 Shaft Sealing Gp 160X190x15 Sm 40-235 , Lv7 / T-815 ( 4X4 ) 273-521-285-000 Shaft Sealing Gp 70X90x13 Si Csn 029401.0 , Lv7 / T-815 ( 4X4 ) 273-521-263-000 Shaft Sealing 30X55x9 Baslf Drw7 , Lv7 / T-815 ( 4X4 ) 442-053-112-414 Hose - 20 / 28-340 , Lv7 / T-815 ( 4X4 ) 107-901-308-000 Sealing Ring 14X18 Csn 02 9310.2 , Lv7 / Av-15 273-111-010-070-9 Ring 15X11 Stn 029280.9 , Lv7 / Hrv Av-15319-531-800-237Packing Ring 30X36 Csn 029310.2 , Lv7 / Hrv Av-15485-Sd-91695Filter , Lv7 / Hrv Av-15309-251-180-811Screw 8X12 , Lv7 / Hrv Av-15311-515-004-025Stud 4X25 , Lv7 / T-815 ( 8X8 ) 442-071-007-714 Transmission Sp-10 Ts 180 +Ch+ Nsp ( Gear Box ) , Lv8 / Pinaka / Lcr / Tilz-9926000920Seal Kit For Wife Valve / Rilief Valve Seal Kit , Lv7 / T-815 ( Hmv ) 311-901-138-000Sealing Ring 22X27 Csn 029310.3 , Lv7 / T-815 ( 4X4 ) 443-401-120-000 Hose Thermopol Thd 2871 , Lv7 / T-815 ( 4X4 ) 990-100-002-000Sealing Ring 124.2X3 , Lv7 / T-815 ( 8X8 ) 443-415-008-000 Air Pressure Guage 044, 10 Kpa , Lv7 / T-815 ( 8X8 ) 443-855-000-002 Fuse Box , Lv7 / T-815 ( 8X8 ) 443-611-150-000 Gasket 12X20x1.54200.04 , Lv7 / T-815 ( 8X8 ) 443-612-387-703 Connectinghead , Lv7 / T-815 ( 8X8 ) 442-985-580-034 Hose , Lv7 / T-815 ( 8X8 ) 442-953-180-064Hose Dia 5X8 720Mm , Lv7 / T-815 131-859-004-814 Fuse For Lorries-1 / 15A , Lv7 / T-815 131-858-019-032 Bushing For Socket , Lv7 / T-815 131-415-044-001 Air Pressure Gau 370-011-09 , Lv7 / T-815 130-052-730-034 Adjusting Nut , Lv7 / T-815 2590 024069 Brake Cyl Bracket Rh , Lv7 / T-815 130-050-210-174 Cross Pin , Lv7 / T-815 442-070-060-974 Part Of Crank Shaft , Lv7 / T-815 ( 8X8 ) 130-050-270-384Upper Ball Socket , Lv7 / T-815 ( 8X8 ) 442-079-070-054Socket , Lv7 / T-815 ( 8X8 ) 2990 016154Distributor , Lv7 / T-815 ( 4X4 ) 442-051-361-644Plug M 42X2 , Lv7 / T-815 ( 4X4 ) 442-076-612-974Injector Line 7 Th Cylinder , Lv7 / T-815 ( 4X4 ) 442-076-612-964Injector Line 6 Th Cylinder , Lv7 / T-815 ( 4X4 ) 442-075-740-554Pin Assy Front Tow Hook , Lv7 / T-815 ( 4X4 ) 442-052-270-184 Centering Screw , Lv7 / T-815 ( 4X4 ) 442-070-070-324 Connection Rod C / W Bolts , Lv7 / T-815 ( 4X4 ) 425-111-011-000 Lubrication Coupling M10x1 Csn 23 1486 , Lv7 / T-815 ( 4X4 ) 336-432-026-000 Hand Pump 008803 , Lv7 / T-815 ( 4X4 ) 336-432-027-000 Hydraulic Cylinder Hzk 40-0293802 , Lv7 / T-815 ( 4X4 ) 273-111-014-340 Ring 63X2csn 02 9281.2 , Lv7 / T-815 ( 4X4 ) 207-685-193-4 Line , Lv7 / T-815 ( 4X4 ) 443-612-131-000-A Reduction Valve , Lv7 / T-815 ( 4X4 ) 443-415-035-000 Revolution Counter - 380 245 130 01 , Lv7 / T-815 ( Hmv ) 112-521-060-653Roller Iii 6X6 Sae E S2100 , Lv7 / T-815 ( Hmv ) 278-432-605-113Gasket ( 06825-43 ) , Lv7 / T-815 ( Hmv ) 5310 240293 Nut M6 Csn 02 1401.25 , Lv7 / T-815 ( Hmv ) 442-055-011-164 Steel Strip, Torro 20 32 / 9C6w1 , Lv7 / T-815 ( Hmv ) 443-077-400-884 Set Of Gaskets Transfer Gearbox , Lv7 / T-815 ( Hmv ) 442-071-080-464Lower Shaft , Lv7 / T-815 ( Hmv ) 443-859-020-810 Fuse For Lorries-1 / 5Amp Csn 30 4470
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 1
Maharashtra View Result →
23.
Educational and Research Institute #10651599 Price Bid
Supply And Installation Of Lab Equipment Government School Located At Karauli District. Tourism And Hopitality Karauli , Tables With Wood Plank Laminated Table Top And Base Of Steel 1. Wooden Table Of Size 24X 24 For Two Persons 1. Round Table With Size 44 With Sitting Capacity Of 4 To 6 Persons , Dining Chairs -Type Of Seat- Wood, Material Of Frame: Ms Powder Coated, Chair Height : 900 Mm, Backrest Width: 400 Mm, Width Of Seat : 450 Mm, Depth Of Seat- 450 Mm, Height Of Seat: 450 Mm, Seat Finish- Mica , Side Station-Wooden Side Station: Usually Consists Of A Set Of Cabinets, Or Cupboards, And One Or More Drawers, All Topped By A Flat Display Surface For Conveniently Holding Food, Serving Dishes, And Even Lighting Devices. The Overall Height Of The Tops Of Most Sideboards Is Approximately Waist Level. Approx Dimensionheight - 42, Width - 48, Depth - 24 , Bar Counter ( Front And Back Bar ) -Wooden Bar Counter With Mirror ( As Per Image ) Counter: Granite Top, Finishing: Shinny Polished, Design: Modular, Led Lights: Yes Height Of Back Bar 2260 Mm, Length Of Back Bar 2600 Mm, Depth Of Back Bar 350 Mm. Height Of Counter 1095 Mm, Length Of Counter 2615 Mm, Depth Of Counter 590 Mm , Storage Cabinet-This Stainless Steel Cupboard Used In Restaurentssize: 1000X500x1800 , Dinner Plate 11-Material Of The Plate: Melamine, Shape Of The Plate: Round, Overall Diameter Or Diagonal Of Plate ( Mm ) - 280, Overall Thickness Of Plate ( Mm ) - 2, Product Type: Dinner Plate , Dessert Plate 9-Material Of The Plate: Melamine, Shape Of The Plate: Round, Overall Diameter Or Diagonal Of Plate ( Mm ) - 230, Overall Thickness Of Plate ( Mm ) - 2, Product Type: Dinner Plate, Size: 9 Inch , B&B Plate -Material Of The Plate : Melamine, Diameter Of Plate ( Mm ) : 100, Colour: White, Pattern: Plain, Measurement : 15 Cms In Diameter , Tea Cup -Material- Ceramic, Artistic Design, Pattern- Machine Crafted, Capacity-200 Ml , Tea Saucer -Usage: Serving Tea, Material - Melamine, Size- 146 Mm , Soup Bowl-Shape-Round, Colour - Multi, Material Of The Bowls - Melamine, Length Of Bowl - 120 ( Mm ) , Width Of Bowl - 120 ( Mm ) , Height Of Bowl- 55 ( Mm ) , Capacity Of Bowl - 300 ( Mm ) , , Soup Bowl 4.5 Chinese-Colour - Musk, Size 4.5 Inch, Capacity- 250 Ml, Shape - Round, Material - Melamine, Pattern - Plain , Soup Spoon Chinese-Material: Melamine , Size ( Mm ) : 16 X 4 X 1.2 , Colour: White Spoon With A Short, Thick Handle Extending Directly From A Deep, Flat Bowl. , Service Bowl 1 Port 6-Shape: Square Bowl, Material: Microwave Safe Plastic, Size Mm ( L*B*H ) : 110*110*50, Capacity- 125 Ml , Service Bowl 2 Port 7 -Shape: Round Bowl, Material: Microwave Safe Plastic, Size Mm ( L*B*H ) : 50*30*30, Capacity- 125 Ml , Service Platter 1 Port 10 -Service Platter 1 Port 10 -Material- Melamine, Edge Type : Rolled Edge, Microwave, Colour-White , Service Platter 2 Port 12 -Material- Melamine, Edge Type : Rolled Edge, Microwave, Colour-White , Pasta Plate 11 -Material: Melamine, Colour- Red, Yellow, Blue And White , Cereal Bowl -Capacity : 1.00 Ltr, Colour - Red, Green, Blue, White, Yellow, Brown , Chutney Bowl Small -Shape: Round Bowl, Colour: Yellow, Material Of The Bowls- Melamine Plastic, Length Of Bowl ( Mm ) - 70, Width Of Bowl ( Mm ) 70, Height Of Bowl ( Mm ) 60, Capacity Of Bowl ( Ml ) -75 , Tea Spoon -Material: Stainless Steel, Type: Tea Spoon ( Small ) , Size: 18 / 8, 18 / 10 And 18 / 0, Colour: Steel Grey , Dessert ( A.P ) Spoon -Dessert ( A.P ) Spoon -Material: Stainless Steel, Colour: Silver, Finish: Mirror , Dessert ( A.P ) Fork-Finish: Chrome Finish, Weight: 50 Gm, Size: 10-12 Cm Material: Stainless Steel Fork Type: Desert Fork , Size: 10Inch, Colour- White, Material-Melamine , Dessert Knife-Material: Stainless Steel Colour: Silver, Size: 2.00Mm , Table Service Spoon -Thickness: 2Mm, Size: 5-7 Inch ( Length ) , Material: Stainless Steel, Finish Type: Mirror Polish , Table Service Fork -Material- Stainless Steel, Finishing - Polished, Size: 178.6 Mm, Weight: 5.47 Gm , Tea Strainer -Material Of Strainer- Stainless Steel, Diameter Of Stainless Steel Wire In Mesh ( Mm ) -0.24, Strainer Mesh Aperture ( Micron ) -700 , Tea Set -Cup: 6 Pcs, Saucer: 6 Pcs , Teapot-1 , Milk Pot-1 , Sugar Pot-1 , Water Jug-Capacity ( Ml ) 2200: Wall Thickness Of Jug ( Mm ) -1.3 Mm, Material Of Jug: Food Grade Plastic Food , Material Of Lid: Grade Plastic, Shape - Round Cylindrical, Capacity ( Ml ) - 2200 , Salt And Pepper Set-Material: Stainless Steel, Colour: Any, Packaging Type: Box, Shape: Round, Height: 5-8 Inch , Tooth Pick Holder-Material: Stainless Steel, Colour Any, Size: 4, 5 Inches , Straw Holder-Material: Stainless Steel, Colour: Any, Height: 105 Mm , Sugar Sachet Holder -Material: Stainless Steel, Dimension: 5.1 X 2.4 X 1.5 Inches, Colour: Silver, Shape: Square, Finishing -Ceramic Finish , Material: Stainless Steel, Size: 16Cm.X11cm.X4cm., Colour - Silver, Material- Brass, Finishing- Powder Coating , Finger Bowl Large With Under Liner-Material: Metal, Size ( Cm ) : 20 / 22 / 24 / 26 / 28 / 30 , Finishing: Polished , Entree Dish Round With Lid ( 1 Portion ) -Shape- Round, Capacity 450 Ml, Finishing Chrome , Entree Dish Round With Lid ( 2 Portion ) -Shape- Round, Capacity 500 Ml, Finishing Chrome , Oval Platter Material- Stainless Steel, Product Depth - 24, Product Width - 16, Product Height - 1.50, Style- Minimalist, Modern , Reserved -- Stainless Steel Reserved Table Sign, Booked Stand Reserve Seats For Guests , Round Service Tray -Material- Metal, Size: 12, 14, 16 Inches, Finish- Nickle Plated, Pattern - Plain, , Rectangular Service Tray -Material: Aluminium, Size: 12 * 6, Depth- 2.5 Cm, Weight: 200 - 250 Grams, Surface Finish: Matt , Ash Tray -Material-Wooden, Shape-Square, Type-Smokeless, Colour: Brown & Golden, Size / Dimension: 10 X 10 X 4 Cm , Tom Collins ( Glass ) -Capacity: 250-300 Ml, Material: Glass, Microwave Safe: Yes, Thickness: 2-7 Mm, Shape: Cylindrical , Hi Ball -Material: Polycarbonate, Capacity: 240-270 Ml, Colour: Clear , Pilsner -Material: Glass, Head Shape: Round, Size: 300Ml, Thickness: 4-10 Mm, Colour: Transparent, , Decanter Small -Capacity: 50, 100 Ml, Material: Glass, Colour : Transparent, , Decanter Large-Capacity: 150 Ml, Material: Glass, Colour : Transparent, , Wine Glass Size: Standard, Colour: Transparent, Material: Borosil Glass , Table Cloths -Material: Cotton, Colour: White And Blue, Size: 54 X 54 Inch , Table Napkins -Table Cotton Cloth Napkins, Specification 60*60 Cm. , Bar Tool Kit-Material: Stainless Steel, Finish: Graphite , Cocktail Shaker-Material: Stainless Steel With Copper Plating, Size: 1 L, Colour- Silver, Dimension ( Inches ) : 4.70
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
26.
Public Administrative Department #10596483 Price Bid
Supply Of Spare Parts And Job Works For Tata 1109 Group Vehicles For The Period Of Two Years-Assy Engine Complete Bs Iii Half Block 497 Tcic Bs Iii Long Block 497 Tcic Bs Iii Gasket Kit ( Engine Overhaul ) Consisting Of : Decarbonising Gasket Kit Consisting Of : Oil Sump Gasket Kit Consisting Of : Assy Cyl Crankcase Without Cl Hsg:E Iii With 77 Dia Air Compressor For Rope Seal Cylinder Liner Sealing Washer 18X22 Sealing Plug Sleeve Cyl Block Clamping Sleeve Cyl Block Cyl. Pin 12 H 8X30 Locking Cover Sealing Plug Am 16X1.5 ( Oil Gallery ) Sealing Washer 16X22 Cyl. Pin ( Cyl Head To Cyl Block ) Cyl Pin 8 M 6X16 Bolt For Main Bearing Cap Locating Pin Assy Tube Dipsitck Complete Assy Oil Dipstick Complete O-Ring 6.00X1.80 Assy Bracket ( Dipstick Mtg ) Clamp Assy Timing Gear Hsg With Bottom Cover Gasket ( Timing Gear Housing ) Locking Plate Hex Screw M 10X25 Cover Front Tgh With Out Oil Hole Cover Front-Timing Gear Hsg ( Mech Feed Pump ) Stud Bm 8X20 Oil Seal-Crankshaft Front Tgh Cover Gasket Integral Shaft Bearing ( Mech Feed Pump ) Cam ( Mechfeed Pump ) Stud ( Cm6x16 ) Spider- ( Mech Feed Pump ) Assy Breather Hose ( Breather ) Hose Clip 25 Assy Cover Push Rod Chamber Gasket-Pushrod Chamber Cover Assy Oil Sump Assy Magnetic Drain Plug Retaining Flange On Oil Sump Spring Washer B 6 Hex Screw M 6X12 Gasket Flange Oil Sump Dipstick Hex Screw M 8X22 Spring Washer B 8 Double Socket Set Oil Sump Gaskets Assy Combi Screw Assy Cyl Head W / Valves:497Bsiii ( 60 Deg ) Assy Cyl.Head W / O Vales:4Sp / 497 Bs-Iii Plug Mc 30X1.5 Plug Mc 24X1.5 Seat Plug ( On Cyl Head ) Core Plug 20 Dia Set Of Valve Seat Ring Bs Iii Std Valve Guide Inlet Std 15.00 Mm Dia Valve Guide-Exhaust ( Std ) Valve Guide Seal-Inlet Valve Guide Seal-Exhaust Valve Seal Set ( 497Cr Bs-Iv Engine ) Consists Of Valve Spring Valve Spring Washer Lock Retainer Valve Spring Valve Spring Lock Half Set Inlet And Exhaust Valves Bs Iii Cylinder Head Gasket-1.35 Thick Assy Cylinder Head Cover ( Al.Side ) Cap ( For Cyl Head Cover ) Gasket ( For Cap ) Gasket ( Intake Mani.Cum Head Cover ) -Ssl Assy Isolator V Type ( For Al Cover ) Assy Isolator Ttype ( For Al Cover ) Hex Flange Bolt ( M 8X 147 L ) Hex Flange Bolt ( M 8X 122 L ) Hex Flange Bolt ( M 8X59 L ) Hex Collar Bolt Air Intake Elbow ( Euro-Iii ) Gasket With Beading ( Air Intake Elbow ) Assy Crankshaft ( Int ) With Pin:Normal Ball Bearing Locking Ring Crankshaft Crank Shaft Gear Key 8X13 Oil Slinger Spacer ( Suitable For Oil Slinger ) Assy Pulley With Cover Thrust Spacer Vibration Damper Lock Kit-Sealing Ring C / Shaft W / Loc.Pins Assy Flywheel With Ring Gear: Bs-Iii Ring Gear Locking Plate Hex Head Bolt Assy Connecting Rod Without Brg Shells Bush Set Connecting Rod Std Connecting Rod Bolt ( Fully Threaded ) Connecting Rod Bearing Set R / S I Connecting Rod Bearing Set R / S Ii Set-Bearing, Connecting Rod Connecting Rod Bearing Set R / S Iv Set Main Bearing Upper / Lower Std Consists Of: Set-Main Bearing, Upper / Lower, Repair Size -I Consists Of: Set-Main Bearing, Upper / Lower, Repair Size -Ii Consists Of: Set-Main Bearing, Upper / Lower, Repair Size -Iii Consists Of: Set-Main Bearing, Upper / Lower, Repair Size -Iv Consists Of: Set Of Thrust Washer Std Set Of Thrust Washer R / S I Set Of Thrust Washer R / S Ii Set Of Bare Piston Std W / O Rings Set Of Piston Ring Std Set : Bare Piston ( Goe India ) :497 Bsiii Piston Set 497 Bs-Iii Std Set : Piston Ring :497Bsiii / 4Sp Bs Iii Piston Ring Set 497 Bs-Iii Std Assy Camshaft With Cyl Pin Cylinder Pin ( Cam Shaft ) Cam Shaft Gear Thrust Washer Hex Screw Drive Gear ( Fip ) Butting Ring Parallel Key Pin ( Inj Timer Mtg ) Valve Tappet Inlet & Exhaust Std Valve Push Rod Inlet & Exhaust Assy Rocker Arm Left With Bush Assy Rocker Arm Right With Bush Bush Ball End Tappet Adjuster Hex Nut ( Ball Pin -Rocker Arm ) Spring Long Assy Rocker Arm Shaft With Arms Complete Assy Rocker Arm Shaft Sealing Cap 14 Connecting Nipple Inside Spring Connecting Nipple Connecting Nipple Outside Rocker Arm Support No. 1 Rocker Arm Support No. 2, 5, 6 Rocker Arm Support No. 3 & 4 Bolt ( Rocker Arm ) Grub Screw Em6x10 Spring Short Set Of Camshaft Bearing Std, Consist Of : Assy Fip Rotary 497 Bsiii Support ( For Fuel Injection Pump ) Injection Pump Gear ( Mech Feed Pump ) Injection Pump Gear Gasket ( Fip To Support ) Gasket ( Support Injection Pump ) Set Of Fuel Pressure Lines Rubber Tube ( 140 ) Hose ( Reducer For Leakoff ) L350 Mm Clamp ( Injector Overflow Tube ) Rubber Grommet Assy Clamp Lower Pipe Clamp Upper Assy Bracket ( Fip Mounting On Cyl. Cr. Case ) Connector One Tube Assy Injector Normal Connector Two Tubes Injector Claw Hex Fl. Bolt-M8x33.5 Sph Washer 8.4 Water Separator With Handprimer-Mico Water Separator Bowl Cover With Built-In Hand Primer Assy Bracket, Water Separator Mounting Fine Filter Assy Bracket ( Fuel Feed Pump Mtg ) Clamp ( Fuel Feed Pump Mtg ) Rubber Packing Assy Feed Pump ( Mechanical ) F 002 A50 025 Gasket ( Mech Feed Pump ) Assy Fuel Filter ( Spin On ) ( E083315100 ) Assy Bracket ( Fuel Filter Mounting ) Assy Overflow Line Pipe Union Bolt ( On Fuel Filter Banjo ) Assy Fuel Line ( Fuel Filter To Mech Feed Pump ) Pipe Union Bolt Sealing Washer 14X18 Assy Fuel Line ( Filter To Fip ) Pipe Union Bolt 8 M 12X1.5 Sealing Washer 12X15.5 Pipe Union Bolt 10 M 14X1.5 Hose Clip 11 Ts 17669 Sealing Washer 6X10 Assy Overflow Line Rubber Hose Hose Clip 11 Ts 17669 Single End Pipe Union 10 Assy Overflow Line ( From Fuel Filter ) Assy Overflow Valve Assy Air Filter Elem.Air Cleaner ( Primary ) Elem.Air Cleaner ( Safety ) Assy Strap Rubber Strap Hose ( Air Filter To Tc ) Assy Pipe ( Air Filter To Tc ) Bracket ( Air Filter Mtg. ) Support Hose Clamp Tb 80 Reducer Elbow Hose Assy Adaptor Service Indicator Bracket ( Service Indicator Mtg. ) Adaptor For Service Indicator Nylon Tube 8Odx6id Air Inlet Duct Rubber Buffer Assy Hose ( Air Inlet Duct To Air Filter ) Hose Clamp Tb 94 Hose Clamp Tb 106 Assy Clamp For Air Intake Pipe Assy Connecting Rod ( W / O Brgs ) Guide Screw Bush ( Connecting Rod ) Cylinder Sleeve Std Gasket, Cylinder Sleeve To Cyl. Block Assy Cylinder Head Gasket Air Compressor Cyl Head Gas / Kit Screw M 8X30 Assy Piston With Rings Set Piston Ring Std 77D Set, A / C Con Rod Bearing Assy Pipe Assy Pipe Rubber Hose Hose Clamp ( 23 Dia ) Elbow K15 M 22X1.5 Bracket Assy Reed Valve Assy Consists Of : Assy Turbocharger Intermediate Pipe ( Turbocharger To Exh. Pipe ) Exhaust Manifold Gasket Exhaust Manifold Gasket ( Exh Manifold To Turbo Charger ) Stud Bm 8X25 ( Manifold To Turbocharger ) Self Locking Nut Stud Bm 8X35 ( Tc To Intermediate Pipe ) Gasket ( Turbocharger To Intermediate Pipe ) Assy Heat Shield ( For Starter Motor ) Assy Bracket ( Tc Intermediate Pipe ) Repair Kit For Turbocharger, Consists Of : Assy Adaptor With Pipe ( Tel Tc ) :497Bsiii Vee Band Clamp Hose Clamp Tb 64 Assy Pipe ( Tc To Ic ) Hose ( Intercooler To Pipe ) Hose Clamp Tb-58 Assy Intercooler ( Vave ) Assy Pipe ( Ic To Air Intake Elbow ) :Lpt Hump Hose ( Pipe To Elbow Cyl Hd Cover ) Starter Motor Spacer Alternator 12V, 65A, 1Gr Pully M / S.Mico Bracket ( Alternator Mounting ) Assy Clamp Rod Complete Clamping Piece Clamping Nut Bolt For Fixing Alternator Spring Alternator Locking Plate V - Belt Cogged ( 1280 Mm Long ) For Alternator Assy.Oil Pump Without Strainer. Oil Pump Housing Assy Strainer Oil Pump Assy Strainer Shaft Driven Gear Oil Pump Gear ( Driven ) Drive Shaft Oil Pump Oil Pump Gear Driveshat Woodruff Key 3X6.5 Drive Gear Oil Pump Valve Housing Oil Pr Relief Valve Spring Pressure Relief Valve Plunger ( For Oil Pressure Relief Valve ) Plug Relief Valve -Oil Pump Gasket Kit, Oil Pump Gear Consists Of : Assy Oil Filter Complete ( Spinon ) Lube Oil Filter-Spin On Assy Oil Filter Gasket ( Oil Filter To Cyl Block ) Assy Oil Cooler Oil Cooler Cover Gasket ( Cover On Oil Cooler ) Gasket Washer ( Oil Cooler Cover ) Sealing Washer 22X27 Pressure Spring Pr Relief Valve Screw Plug Sealing Washer A 8X12 Hex Screw M 8X20 Gasket ( Assy Cooler On Cyl Block ) Hex Bolt M 8X40 Low Oil Pressure Switch Assy Piston Cooling Nozzle With Dowel Pin Assy Relief Valve Sealing Washer Sealing Washer Assy Water Pump W / P Gasket With Silicone Beading Pulley ( Water Pump ) -Singal Groove Assy Fan Assy Thermostat ( 35 Dia Bypass ) Hose ( Radiator To Water Pump ) Reducer Hose ( Thermostat To Water Pump ) Hose Clamp ( 50 Dia ) Assy Upper Cooling Water Line Gasket ( Ucw Line ) Temperature Transducer Hose ( Thermostat To Radiator ) Hose ( Upper Cooling Line To Thermostat ) Major Repair Kit ( Water Pump W / Plastic Impeller ) Water Pump Assy ( Intergral Shaft Brg ) Kit-Minor-Waterpump-252520100145 Kit-Major-Waterpump 252520100145 Repair Kit Water Pump ( Minor ) Consists Of: Engine Mounting Arm -Left Engine Mountig Arm -Right Hex Bolt M 12X15x40 Hex Bolt M 12X15x52 Spring Washer B 12 Assy Engine Mounting Front ( Lh ) Assy Engine Mounting Front ( Rh ) Cover Engine Mounting Front Rh Tab Washer Assy Rubber Support Rh Rear Assy Rubber Support Lh Rear Assy Cover Plate 310 Dia. ( Reinforced ) Driven Plate Assy 310 Dia. ( Reinforced ) Clutch Housing Protective Cover ( Clutch Housing Front ) Clutch Housing Lower Part Clutch Cover Housing Upper Pin Assy Clutch Release Bearing With Sleeve Clutch Release Bearing Clutch Release Fork ( Reinforced ) Ball Pin Bracket Inside Outer Race Assy Bracket Outside Rubber Bellow ( Clutch Release Fork ) Cover ( Clutch Housing Side ) Cover Diaphragm Sub Assy Kit For Strap And Rivets Kit For Clutch Disc Gbs40-5 / 7.51 ( Faster 3 / 4 ) With 8Bcf, W / Pto Provision Gear Box Housing Cylindrical Pin 10 H 8X20 Filling Plug Magnetic Drain Plug Gasket, Front Cover Lower Housing Cover Front, Lower Gasket ( Fr. Cover Top To Hsg. ) Gear Box Housing Cover Front Top Oil Slinger ( Front Cover ) Oil Seal Butting Ring 2.90 Mm Thick Butting Ring 2.95 Mm Thick Butting Ring 3.00 Mm Thick Butting Ring 3.05 Mm Thick Butting Ring 3.10 Mm Thick Butting Ring 3.15 Mm Thick Butting Ring 3.20 Mm Thick Butting Ring 3.25 Mm Thick Butting Ring 3.30 Mm Thick Butting Ring 3.35 Mm Thick Butting Ring 3.40 Mm Thick Butting Ring 3.45 Mm Thick Butting Ring 3.50 Mm Thick Butting Ring 3.60 Mm Thick Gear Case Cover Rear Oil Seal Adapter Assy Threaded Bush Plug Speedo Drive Shim 0.05 Mm Thick Shim 0.1 Mm Thick Shim 0.2 Mm Thick Shim 0.4 Mm Thick Shim 0.8 Mm Thick Gasket ( Gear Case Cover Rear ) Gear Case Cover Top ( Lower Half ) Stud Pin Swing Lever Needle Roller 2X13.8 Br Ii Pressure Relief Valve Thrust Pin ( Reverse Indicator Switch ) Pressure Spring ( Reverse Indicator Switch ) Reverse Light Switch Swing Lever - 1St Speed Washer ( Swing Lever ) Pressure Piece For Check Plate Pressure Spring For Pressure Piece Slotted Plug Interlocking Pin Sealing Plug M 24X1.5 Assy Check Plate Stopper Piece Check Plate Support Piece Check Plate Selector Shaft For First Speed Selector Shaft ( 2 / 3 ) Selector Shaft ( 4 / 5 ) Selector Shaft ( For Reverse Gear ) Gear Shift Dog ( For First Gear ) Selector Fork ( 2 / 3 ) Selector Fork ( 4 / 5 ) Selector Fork ( For 1St Speed Gear ) Selector Fork ( For Reverse Gear ) Pressure Spring Steel Ball 11 Mm Dia. Clamp ( Selector Shaft To Gear Box Housing ) Locking Plate ( Selector Shaft To Gear Box Housing ) Cover Top ( Upper Half ) Needle Bearing Shifter Finger Selector & Shifter Shaft Oil Seal Scraper Ring Shifting Lever Cap Bellow Gasket ( Between Upper & Lower Half ) Intermediate Lever Reverse Gear Pivot Pin Bush Sliding Key Gear Box Gasket Kit Consisting Of : Overhauling Kit - Gb 40 Consisting Of : Drive Shaft ( 7.51R ) Compression Spring Clamping Plate Snap Ring 2.68 Mm Thick Snap Ring 2.73 Mm Thick Snap Ring 2.78 Mm Thick Snap Ring 2.83 Mm Thick Snap Ring 2.88 Mm Thick Snap Ring 2.93 Mm Thick Four Point Ball Bearing Spacer On Drive Shaft Lock Nut Lh Thread Roller Cage ( 31Mm Long ) Main Shaft ( W / O Groove ) Pressure Spring Pin On Main Shaft Butting Ring 6.95 Mm Thick Butting Ring 7.00 Mm Thick Butting Ring 7.05 Mm Thick Butting Ring 7.10 Mm Thick Butting Ring 7.15 Mm Thick Butting Ring 7.20 Mm Thick Butting Ring 7.25 Mm Thick Butting Ring 7.30 Mm Thick Butting Ring 7.35 Mm Thick Butting Ring 7.40 Mm Thick Butting Ring 7.45 Mm Thick Butting Ring 7.50 Mm Thick Butting Ring 7.55 Mm Thick Butting Ring 7.60 Mm Thick Butting Ring 7.65 Mm Thick Butting Ring 7.70 Mm Thick Butting Ring 7.75 Mm Thick Butting Ring 7.80 Mm Thick Butting Ring 7.85 Mm Thick Butting Ring 7.90 Mm Thick Butting Ring 8.00 Mm Thick Synchronising Ring Synchronising Sleeve 4Th & 5Th Synchronising Cone Shifting Sleeve Assy Helical Gear 4Th Speed Double Row Needle Cage Collar Bushing 44.5 Mm Long ( For Third Speed Gear ) Collar Bushing 44.6 Mm Long ( For Third Speed Gear ) Double Row Roller Cage Assy Helical Gear 3Rd Speed Synchronising Sleeve 2 / 3 Helical Gear 2Nd Speed Reverse Gear On Main Shaft Shifter Sleeve 1St Speed Collar Bushing 47.2 Mm Long Collar Bushing 47.3 Mm Long Collar Bushing 47.4 Mm Long Collar Bushing 47.5 Mm Long Collar Bushing 47.6 Mm Long Collar Bushing 47.7 Mm Long Collar Bushing 47.8 Mm Long Collar Bushing 47.9 Mm Long Cylindrical Roller 4X8 Gear Wheel 1St Speed Assy Gear Speedometer Drive Shaft ( Speedo Drive ) Assy Pinion ( Speedometer Drive ) Coupling Flange Hex. Nut Counter Shaft ( With Pto Provision ) Twin Gear ( Counter Shaft ) ( 2 / 3 ) 4Th Gear ( On Counter Shaft ) Constant Mesh Gear ( On Counter Shaft ) Circlip A 52X2.5 Taper Roller Bearing Reverse Idler Gear With Bush Reverse Idler Gear Shaft Synchro Kit Gbs 40 Consisting Of : Assy Bracket ( For Power Steering ) Assy Gear Shift Lever Sub Assy Cup Bush ( G.S. Lever Ball Seat ) Bush ( Extension Arm ) Bush ( Spherical Seat G S Lever ) Retaining Plate Spring Ring Bellow Holder Rubber Bellow ( Small ) Spacer ( G.S. Lever ) Assy Knob ( G.S. Lever ) Rubber Seal Assy Bellow ( G.S. Lever Top ) Assy Turning Tube ( W / O Ball Joint ) Sub - Assy Ball & Socket Joint Hex. Thin Nut M 18X1.5 ( Ball Joint ) Link Rod ( On Top Cover ) Assy Ball Joint Rh Threads Assy Ball Joint Lh Threads Assy Clutch Pedal Complete Sintered Bush Rubber Cover Assy Support Complete ( Clutch ) Torsion Spring Clutch Master Cylinder ( 19.05 Dia ) Pin Clutch Pedal Bush ( Clutch Pedal ) Clutch Booster Assy ( 90 Dia ) Assy Connecting Line Assy Hose Assy Tube Assy Tube Assy High Pressure Hose Assy Bracket ( Clutch Booster. ) Assy Push Rod Purge Tank ( Air Tank For Clutch Booster ) Assy Brake Pedal Complete Brake Pin Assy Fluid Container Assy Cover ( Controls ) Assy Dual Brake Valve Repair Kit ( Minor ) Clutch Master Cylinder Assy Major Repair Kit ( 90 Dia Booster ) , Consisting Of Assy Minor Repair Kit ( 90 Dia Booster ) , Consisting Of Assy Accelerator Pedal Module ( M / S Bosch ) Bracket ( Electronic Accelerator Pedal Mtg ) Frame Assy Assy Cross Member Front ( With Towing Hook ) Coupling Pin Pin Front Spring Bracket Front & Rear Cross Member ( 2Nd ) Assy Bracket ( Rh ) Eng. Mtg. C.M. Frt Assy Bracket ( Lh ) Eng. Mtg. C.M. Frt Assy Cross Member Front Eng. Mtg. Support Lh Support Lh ( Top Flange ) Assy Engine Cross Member ( Rear ) Assy Support ( Frt ) Lh Assy Support ( Frt ) Rh Assy Support ( Rear ) Lh Assy Support ( Rear ) Rh Assy Cross Member Support Top Support Bottom Cross Member Rear Spring Rear Spring Bracket Front & Rear Slide Support End Cross Member Assy Tube Rupd Assy Bracket Compl. Rh Assy Bracket Compl. Lh Assy Bottom Shield ( Radiator Side ) Radiator Bottom Shield Mtg.Bracket Bracket Lh Rear For Mtg. Rad.Shield Bracket Rh Rear For Mtg. Rad.Shield Assy Shield Centrepiece Eng.Encapsulation Assy Side Shield Lh Eng.Encapsulation Assy Side Shield Rh Eng.Encapsulation Assy Bkt.Rh ( Front ) Assy Bkt.Lh ( Frt ) Assy Bkt.Rh ( Rear ) Assy Bkt.Lh ( Rear ) Assy Bottom Shield G / Box & Clutch Bracket Lh Bracket For Gear Box Shield Bracket ( For Gb Shield ) R.H Assy Side Shield Rh ( Between Cab & L / Body ) Assy Side Shield Lh ( Between Cab & L / Body ) Assy Front Spring Assy First Leaf With Bush Bush ( For First Leaf ) Second Leaf Centre Bolt Hex Nut M12 Assy Spring Shackle Front Bush Spring Pin ( To Spg. Bracket Rear ) Spring Pin ( To Spg. Bracket Front ) Dust Cap Spring Pin Grease Nipple Am 10X1 Cotter Pin Rubber Buffer Front Axle Hex. Nut M 16X1.5 U Clamp ( Front ) Guide Plate Front Caster Plate Lh Shock Absorber Front Bush ( Front Shock Absorber ) Washer ( Shock Absorber Fitting ) Bracket Lower ( Frt. Shock Absorber ) Locking Sheet ( Bracket To Frt Axle Beam ) Hex. Bolt M 16X1.5X85 Assy Bracket ( Lh ) Front Shock Absorber Assy Bracket ( Rh ) Front Shock Absorber Assy Reinforcement Bracket Lh Assy Reinforcement Bracket Rh Hex. Bolt M 14X1.5X75 Assy Rear Leaf Spring Lpt 1109 Assy First Leaf With Bush Second Leaf Third Leaf Fourth Leaf Fifth Leaf Sixth Leaf Packing Plate First Leaf ( Aux. Spring ) Second Leaf ( Aux.Spring ) Third Leaf ( Aux.Spring ) Fourth Leaf ( Aux.Spring ) Fifth Leaf ( Aux.Spring ) Sixth Leaf ( Aux.Spring ) Spring Clip Assy Support Centre Pin Bush ( For First Leaf ) Spring Pin Rear Lock Plate Screw M 8X18 Is 1364 Assy Spring Shackle Rear Spring Guide Plate Rear Clamp ( Banjo ) Hex. Nut M 16X1.5 Assy Front Axle With Brakes Front Axle Beam Cotter Pin ( Stub Axle To Axle Beam ) Nut M 8 Front Stub Axle With Bush Bush Plug ( Stub Axle Top ) Thrust Washer Castle Nut M 32X1.5 Sealing Cap Gasket Ring Circlip B 42X1.75 Nut M 12X1.5 King Pin 35.00 Mm Dia Thrust Bearing Normal Thrust Washer Upper Lh Side Thrust Washer Lower Lh Side Thrust Washer 1.2 Mm Thick Thrust Washer 1.3 Mm Thick Spacer Ring Lh Sealing Ring Spacer Spacer Tube Taper Roller Bearing Inner Shim Shim Shim Shim Shim Shim Taper Roller Bearing ( Outer ) Brake Drum Front Assy Hub Front With Bearing ( Spigotted ) Hub Bolt Front Front Hub Cover Tie Rod Arm Lh Tie Rod Arm Rh Steering Arm Top Assy Tie Rod Tie Rod Repair Kit Consisting To : King Pin Repair Kit Std. Consisting Of : King Pin Repair Kit Std. I Consisting Of : King Pin Repair Kit R / S I Consisting Of : King Pin Repair Kit Std. Ii Consisting Of : Assy Rear Axle Complete With Brakes ( 49 / 11 Ratio ) Assy Rear Axle Beam With Pr. Ring. Stud & Dowels Stud Bm 12X40 Stud Bm 12X55 Stud Bm 12X80 Stud Pressure Ring Spacer Locking Ring Locking Plate Assy Hub Rear W / O Bearing Hub Bolt Rear Oil Catcher Spacer Tapered Roller Bearing, Inner Spacer Tube Circlip 120X4 N Rear Axle Shaft Gasket ( In Between Cover To Hub ) Cover ( Rear Hub ) Threaded Ring Lock For Threaded Ring Locking Plate Assy Adjusting Pin Lock Nut Cylindrical Pin 6H 8X16 Bolt Plummer Block Cover Differential Housing Assy Screw M 14X1.5X65 Differential Spider Differential Bevel Pinion Spherical Washer Rear Axle Shaft Gear Thrust Washer 1.95 Mm Thick Thrust Washer 2.00 Mm Thick Thrust Washer 2.07 Mm Thick Thrust Washer 2.13 Mm Thick Thrust Washer 2.30 Mm Thick Taper Roller Bearing ( 65X120x32.75 ) Assy Crown Wheel & Pinion ( 49 / 11-Orlkn ) Locking Plate Screw ( Crown Wheel ) Cyl. Roller Bearing ( 35X23x80 ) Ext.Circlip 35X1.5N Is 3075P1 Locking Wire Shim 0.10 Mm Thick Shim 0.15 Mm Thick Shim 0.20 Mm Thick Shim 0.50 Mm Thick Shim 1.50 Mm Thick Shim 1.0 Mm Thick Taper Roller Bearing ( 60X135x33.44 ) Spacer Ring ( To Drive Pinion ) Spacer Ring 10.28 Mm Thick Spacer Ring 10.30 Mm Thick Spacer Ring 10.32 Mm Thick Spacer Ring 10.34 Mm Thick Spacer Ring 10.36 Mm Thick Spacer Ring 10.38 Mm Thick Spacer Ring 10.40 Mm Thick Spacer Ring 10.42 Mm Thick Spacer Ring 10.44 Mm Thick Spacer Ring 10.46 Mm Thick Spacer Ring 10.48 Mm Thick Spacer Ring 10.50 Mm Thick Spacer Ring 10.10 Mm Thick Spacer Ring 10.12 Mm Thick Spacer Ring 10.14 Mm Thick Spacer Ring 10.16 Mm Thick Spacer Ring 10.18 Mm Thick Spacer Ring 10.20 Mm Thick Spacer Ring 10.22 Mm Thick Spacer Ring 10.24 Mm Thick Spacer Ring 10.26 Mm Thick Spacer ( Between Pinion Brg And Coup.Flange ) Oil Slinger ( Tail Pinion ) Threaded Ring Oil Seal ( To Pinion ) Locking Plate Screw M 8X12 Assy Coupling Flange ( 6 Bolt, 130 Od ) Dust Seal ( Mechanical Face Seal ) Nut Gasket ( Carrier To Beam ) Assy Spare Wheel Carrier ( Winch Type ) Assy Wheel Rim-6X20 134Mm Offset Assy Wheel Nut ( M 20 ) Ratchet Arm Lock Ring ( For Wil Make Wheel Rim ) Assy Holding Bracket Assy Handle Spacer Plate Spacer Plate Spacer ( Between Inner & Outer Rim ) Assy Prop.Shaft With Sealed C.B. Assy Prop. Shaft Rear Complete Dust Cover Flange Yoke ( 8 Holes ) Rubber Housing End Ring Rubber Seal Seal Cover Spacer Centre Bearing Bracket Screw Assy Universal Joint Long Fork Complete Dust Seal Bolt Locking Plate Assy Cross Kit Consisting Of : Prop. Shaft Guard Assy Drum Brake Front Rh Wt Dc&Fast-Bil Assy Drum Brake Front Lh Wt Dc&Fast-Bil Torque Plate Lh Torque Plate Rh Set-Bolt Flange, Tube & Bracket Assy Lh Flange, Tube & Bracket Assy Rh Camshaft Lh Camshaft Rh Oil Seal Bush ( Bronze ) Sleeve ( Slack Adj. End ) Shim 0.5 Mm Shim 0.3 Mm Washer 2.5 Mm Washer 1.5 Mm Circlip Brake Support Lined Shoe Assy Axle Set Brake Lining Std W / Rivets Nasb Axle Set Brake Lining Rs1 W / Rivets Nasb Axle Set Brake Lining Rs2 W / Rivets Nasb Roller Spring Pull Off-Cam End Spring Fulcrum End Fulcrum Pin Fulcrum Pin Bush Dust Cover Top Dust Cover Bottom Grommet Assy Drum Brake Rear Rh Wt Dc&Fast-Bil Assy Drum Brake Rear Lh Wt Dc&Fast-Bil Torque Plate Rh / Lh Cam Shaft Rear Lh Cam Shaft Rear Rh Cam Shaft Bracket Assy Spacer ( Cam Shaft ) Sleeve ( Slack Adj. End ) Delrin Dust Cover Top Dust Cover Bottom Brake Chamber With Adaptor ( Type-16 ) Assy Slack Adjuster Straight Front M / S.Haldex Automatic Slack Adjuster Assy Front M / S Mei Anchor Bracket Rh ( Auto Slack Adjuster ) Anchor Bracket Lh ( Auto Slack Adjuster ) Spacer ( Auto Slack Adjuster ) Shim ( Auto Slack Adjuster ) Spring Brake Actuator Rh ( Type 16 / 24 ) - Straight Port Spring Brake Actuator Lh ( Type 16 / 24 ) - Straight Port Assy Bracket Lh ( For 16 / 24 Straight Portchamber Mtg ) Assy Bracket Rh ( For 16 / 24 Straight Portchamber Mtg ) Automatic Slack Adjuster Rear Rh ( 43Mm Offset ) Automatic Slack Adjuster Rear Lh ( 43Mm Offset ) Anchor Bracket Rh ( Auto Slack Adjuster ) Anchor Bracket Lh ( Auto Slack Adjuster ) Assy Air Tank Complete With Support, Spacer, Strap. Thrust Ring O Ring 20.30X2.62 Drain Valve With Filter Sealing Plug Am 22X1.5 Assy Support ( Air Tank Mtg ) Spacer Block Assy Strap Complete Assy Drying And Distribution Unit Automatic Load Sensing Valve Bracket For Load Sensing Valve Mtg. Assy Pull Rod Bracket For Pull Rod Graduated Hand Brake Valve Assy Bracket For Quick Release Valve Quick Release Valve Assy Metal Pipe W / Crim.Hose ( Air Comp.To Ddu ) 1 / 2Assy Hose ( 450 Lg ) 3 / 8 Hose Assy With End Fittings ( L630 ) Assy Hose With End Fittingd Assy Nylon Pipe Set Complete ( Chassis ) Assy Ny.Pipe Set Cab Compl-1613Cab Ddu Repair Kit ( Major ) - Consists Of Desiccant Cartrige Repair Kit Dual Brake Valve Consisting Of : Diaphragm Repair Kit Spring Brake Actuator Consisting Of : Worm Shaft Kit Consisting Of : Major Repair Kit Consisting Of : Repair Kit Consisting Of : Repair Kit Quick Release Valve, Consisting Off: Repair Kit For Automatic Load Sensing Valve, Consisting Off: Assy Magnetic Valve With Din Ter.& Hsg. Assy Air Cylinder ( W / O Magnetic Valve ) Repair Kit For Air Cylinder Assy Steering Wheel W / O T-Emblem T-Emblem Assy Steering Spindle Top Ext. Circlip 20X1.2 N Deep Groove Ball Bearing Assy Steering Column Hex. Thin Nut M 14X1.5 Assy Steering Spindle ( Middle ) Steering Spindle Bottom Spacer Spring Seat Compression Spring Spring Seat Cup Assy Universal Joint Rubber Bellow ( Floor ) Clamping Ring Rubber Bellow ( U.J. ) Bolt Drag Link Assy Pitman Arm Assy Bracket Steering Gear Box Assy Hex Screw ( Strg Gear Box To Bracket ) Hex Screw ( Strg Gear Box To Bracket ) Bush Kit For Worm And Main Nut Assy Sector Shaft Bush Adjuster Spacer Angular Contact Bearing Oil Plug ( Drain ) Oil Plug ( Filler ) Lock Nut ( Sector Shaft ) Lock Nut ( Screw Plug ) Bolt ( Cover Plate ) Oil Seal ( Worm ) Oil Seal ( Sector Shaft ) Tab Washer ( Sector Shaft ) Tab Washer ( Screw Plug ) Washer ( Adjuster ) Spring Washer ( Cover Plate ) Washer ( Oil Plug ) Breather Plug Universal Joint Spring Washer Assy Fuel Tank Complete ( 160 Lit Round ) Assy Fuel Tank Cap Assy Suction Tube Tank Unit Assy Support Complete Assy Strap Rubber Packing Rubber Packing Reinforcement Coated Aluminium Washer Assy Suction Line ( Tank To Strainer ) Fuel Strainer ( Baby Filter 4080720 ) Bracket ( Baby Filter Mtg. ) Clamp ( Baby Filter ) Assy Suction Line ( W / Sep To Feed Pump ) Assy Suction Line ( Strainer To W / Sep ) Assy Return Line ( Engine O / Flow To Tank ) Assy Bracket ( For Water Separator ) Gasket Assy Front Pipe ( Bs Iii ) Assy Exhaust Brake Unit. Stopper Plate Bush Bush Assy Bracket Pin Assy Intermediate Pipe ( 36 Wb ) Assy Bracket ( For Exhaust Mtg ) Assy Silencer Assy Bracket ( Front Silencer Mtg ) Rh Bracket Silencer Mounting Strap Washer Rubber Buffer Tube Exhaust Clamp Bracket ( For Silencer Mtg ) Bracket ( For Silencer Mtg ) Assy Radiator Assy Radiator Mtg. Pad Bottom 50 Mm Pressure Cap ( Tata Toyo ) S0218003m001 Drain Cock Assy Bracket ( Rad Mtg Bottom ) Assy Radiator Mtg. Pad Side Radiator Mtg. Bracket - Lh Radiator Mtg. Bracket - Rh Fan Shroud ( 515 Dia Fan ) Recovery Coolant Tank ( No Loss Tank ) Coolant Fill Pipe With Pressure Cap Rubber Hose ( Coolant Fill Pipe To Radiator ) Hose Clamp ( 58 Dia. ) Hose Clamp ( 72 Dia. ) Hose ( No Loss Tank To Filler Pipe ) Hose Clamp ( 16 Dia. ) Hose ( T.Vent To Coolant Filling Pipe ) Hose ( Coolant Filling Pipe To Rad Vent ) Hose Clamp ( 18 Dia. ) Support Plate For Coolant Filler Pipe Assy Copper Battery Cable - Ve Horn 12V Earth Strap With Cu Tube Relay ( For Auxiliaries ) 12V Assy Engine Lamp Assy Head Lamp With Bulbs Lh ( Motorised ) Assy Head Lamp With Bulbs Rh ( Motorised ) Head Lamp Levelling Switch Assy Blinker Lamp Lh Assy Blinker Lamp Rh Assy Side Ind. Lamp Rh W / Bulb 12V Assy Tail Lamp Lh W / Bulb Assy Tail Lamp Rh W / Bulb Bracket ( Tail Lamp ) Assy Tail Lamp Bracket Rh Assy Tail Lamp Bracket Lh Flasher Sq. 12 V End Outline Marker Lamp Steering Lock Cum Ignition Switch Assy Cab Lamp ( With Bulb ) Assy Diode ( Mssl Connector ) Wiper Controller / Timer Beeper Alarm Unit Mech Stop Light Switch Wiring Harness Main Wiring Harness Tail Assy Cable Set ( For Cab Lamp ) Wiring Harness Pig Tail ( Feed Pump ) W / H Engine Ecu, Ems Vp37 For Diesel Engine Euro-Iii Boost Pressure / Temp Sensor Water Temp Sensor M / S.Mico Engine Speed Sensor Vehicle Speed Sensor Vehicle Speed Sensor-8 Pulse Instrument Cluster ( 1:0.72 ) Fuel Gauge Temperature Gauge Speedometer Speedocable ( Jis ) 3300 Lg Piano Switch Exhaust Brake On Piano Key Switch ( Engine Lamp ) Low Air Pressure Switch Combi Switch Assy Turn Indicator Lamp Cab Kit-All 1109 Ex Vehicles Assy Bare Cab Fender Outer Lh Assy Fender Inner Lh Fender Outer Rh Assy Fender Inner Rh Assy Panel Corner Bottom Lh Assy Panel Corner Bottom Rh Assy Outer Panel Corner Comp. ( Front ) Lh Assy Outer Panel Corner Comp. ( Front ) Rh Assy Support Front ( Grill ) Step Board Assy Step Additional. Rubber Mould Windshield Glass ( 5.76 Thk ) Rubber Mould ( Rear Window ) Assy Rear Window Complete With Tinted Glass Assy D Assy Board Complte ( Rhd ) Dashboard Centre ( Grey Pigmented ) Assy Reinforcement Middle Lh Assy Reinforcement Middle Rh Dashboard ( Grey Pigmented ) -Lh Dashboard ( Grey Pigmented ) -Rh Reinforcement ( Front ) Assy Reinforcement Inside ( Glove Box ) Assy Reinforcement Complete ( Inside ) Assy Reinforcement ( Outside ) Assy.Reinforcement ( Top ) Assy Bracket ( Dashboard Mtg. ) Assy Bracket ( Dashboard Mtg. ) Lh Assy Glove Box Complete ( Grey Pigmented ) Assy Key Cover Dash Mounting ( Grey ) Assy Bracket Lh Assy Bracket Rh Kit Of Nacelle, Consists Off: Ventilation Nozzle Assy Cover ( T- Emblem ) Dashboard Cover Clutch Fluid Bottle ( Grey ) Cover Centre For Dashboard ( Grey ) Speaker Grill Speaker Grill Garnish ( For Side Defrost ) Garnish ( For Middle Defrost ) Dash Board Cover-Rhd Kit Assy Supd Assy Door Shell-Lh Assy Door Shell Rh Assy Hinge Top Lh ( Door ) Assy Hinge Top Rh ( Door ) Assy Hinge Bottom Lh ( Door ) Assy Hinge Bottom Rh ( Door ) Assy Guide Channel Lh Assy Guide Channel Rh Assy Dovetail Bottom ( Door ) Dovetail Bottom ( Body Side ) Velvet Channel Assy Padding Door Lh Assy Padding Door Rh Weather Strip Lh Weather Strip Rh Assy Sealing Mould Lh ( Outer ) Assy Sealing Inner Lh Assy Sealing Inner Rh Magazine Pocket ( Grey ) Lh Magazine Pocket ( Grey ) Rh Housing ( Ash Tray ) Assy Ash Tray ( Black ) Reflex Reflector ( Front Door ) Assy Door Pad Clip Grab Handle ( Door ) Grab Handle ( Door Post ) Lh Grab Handle ( Door Post ) Rh Assy Door Lock Complete Lh Assy Door Lock Complete Rh Snap Connector L.H Snap Connector Rh Assy Inner Handle Assy Outer Handle Lh Assy Outer Door Handle Rh Link Lh ( Inner Handle ) Link Rh ( Inner Handle ) Link ( Outer Handle ) Lever Lh ( Lock Cylinder To Latch ) Lever Rh ( Lock Cylinder To Latch ) Link ( Pop-Up Knob ) Lh Link ( Pop-Up Knob ) Rh Knob ( Inner Lock ) Assy Striker ( Door Lock ) Kit For Locks-Cab Version- Consisting Of : Assy Winding Regulator Lh Assy Winding Regulator Rh Holder ( Regulating Glass ) Spacer ( Regulating Handle ) Assy. Handle [ Window Regulator ] Regulator Glass Lh Regulator Glass Rh Assy Centre Flap Beading ( Front Panel ) Assy Hinge ( Centre Flap ) Assy Lock ( Centre Flap ) Assy Stay Rod Assy Rubber Buffer Assy Release Cable Complt. ( Centre Flap ) Assy Striker ( Centre Flap ) Spring Clamp Centre Grill ( Front ) T-Emblem ( Mesh Center Grill Front ) Assy Bazzle-Rh ( Grey ) Assy Cover ( Bazzle ) Lh Assy Cover ( Bazzle ) Rh Assy Head Lamp Dome Rh Assy Head Lamp Dome Lh Assy Cover Side Lh Assy Cover Side Rh Assy Cover Middle With Tata C / Flap-Black Assy Cover Middle With Tataletters - Grey Colour Grill Lh Grill Rh Grill Middle Grab Handle Assy Grab Handle ( Rear Inside Cab ) Assy Cover Lh ( Centre Flap Hinge ) Assy Cover Rh ( Centre Flap Hinge ) Assy Sunvisor Rh Assy Sunvisor Lh Assy Kit Rear View Mirror Outside Complt. Rear View Mirror Outside Lh Rear View Mirror Outside Rh Rear View Mirror Outside ( Wide Angle ) Assy Frame Complete Rvm Cap For Rear View Mirror Rubber Washer ( Rvm ) Rubber Pad ( Bracket Top Rvm ) Rubber Pad ( Bracket Bottom Rvm ) Sleeve ( For Frame Rvm ) Bracket Top Lh Bracket Top Rh Bracket Bottom Lh Bracket Bottom Rh Assy Inner Handle ( Front W / O Hanger ) Assy Knob Assy Mascot 1112 Ex Sticker. Turbo Intercooler Cover Step Board 17W-Hi- Power Wiper Motor Assy Wiper Arm Assy Wiper Blade Bracket ( Wiper Motor Mtg. ) Gasket ( Bracket To Fire Wall ) Kit For Wiper Motor W / O 5 P.Conn.-Lucas Kit For Elec. Wind Screen Washer Unit Consisting Of : Assy Duct Outer Lh Assy Duct Outer Rh Duct Inner ( Wind Shield Bottom ) Hose ( Ventilation ) Elbow Duct Lh Elbow Duct Rh Assy Ventilation Grill ( Leg Room ) Top Duct ( Leg Room Ventilation ) Bellow ( Leg Room Ventilation ) Assy Bracket ( Elbow Duct Mtg. ) Bottom Duct ( Leg Room Ventilation ) Assy Bumper Complete Assy Support Lh ( Bumper Mtg ) Assy Support Rh ( Bumper Mtg. ) Assy Reflex Reflector Assy Cross Tube ( Torsion Bar ) With Mtg.Bracket Lh & Rh Serrated Bush Rh ( Cross Tube ) Spacer Bush Assy Rubber Bush ( Front Mtg. ) Mounting Bracket Bottom Lh Assy Mounting Bracket Bottom Rh Front ( Cab ) Torsion Bar Adjuster Rh ( Torsion Bar ) Special Bolt ( For Adjuster ) Assy Nut Plate ( Front Mtg. ) Assy Stay Complete Assy Cab Mounting Mechanism Rh Assy Cab Mounting Mechanism Lh Pin ( Lock Mechanism ) Pin ( Intermediate Link ) Assy Handle Mounting ( Cab Locking Mechanism ) Assy Connecting Link Lh Assy Connecting Link Rh Assy Secondary Lock ( Locking Mechanism ) Assy Mounting Bracket Lh ( Chassis Side ) Assy Mounting Bracket Rh ( Chassis Side ) Assy Mounting Hook ( Cab Locking Mechanism ) Plate ( Cab Locking Mechanism ) Mounting Cup ( Cab Locking Mechanism ) Rubber Mounting ( Upper ) ( Cab Locking Mechanism ) Assy Rubber Mounting ( Lower ) -Cab Locking Mechanism Spacer ( Rear Mounting ) Bright Washer 17 Nyloc Nut M 16X1.5 Assy Bracket Upper ( Chassis Side ) Assy Mounting Pad ( Cab Locking Mechanism ) Mudguard Lh. Mudguard Lh. Mudguard Rh. Mudguard Rh. Assy Support Bottom Lh. ( Mudguard ) Assy Support Bottom Rh. ( Mudguard ) Clamp ( Rear Mudguard Mtg. ) Assy Mud Flap Rear Assy Mud Flap Rear Mud Flap Front Assy Mudflap Front Outer Lh Assy Mudflap Front Outer Rh Assy Bracket Bottom Lh ( Mud Flap Mtg. ) Assy Bracket Bottom Rh ( Mud Flap Mtg. ) Sealing ( Rear Mudguard ) Assy Engine Shielding Lh Assy Engine Shielding Rh Assy Noise Shield Lh Assy Noise Shield Rh Assy Driver Seat With Head Rest Assy Driver Seat With Head Rest-Rhd. Assy Seat Box Complete ( Driver Seat ) Co - Driver Seat With With Head Rest Assy Co-Driver Seat With Head Rest Assy Seat Belt Kit Complt. ( E-Certi. ) Assy Seat Belt Kit Driver Side. Assy Seat Belt Kit Co-Driver Side. 1 Acceleator Cable Rem / Rep / Ref 2 Acc End Change & Setting 3 Acc Assy O / H 4 Air Filter Element Change 5 Air Exh Valve Opening O / H & Fitting 6 Air Compressor Removing & Refitting 7 Air Filter Cleaning 8 Air Pip Repair / Replace Each 9 Acc Pedal Replace 10 Air Tank Removing & Refitting 11 Alternator Removing & Refitting 12 Alternator Assy O / H 13 Air Filter Cleaning 14 Air Filter Assy Removing And Refitting 15 Air Tank Receiver Removing And Refitting 16 Air Tank Valve Removing And Refitting 17 Air Dry Valve Setting 18 Alternator Setting Bolt Change 19 Alternator Bracket Change 20 Auxillary Water Tank ( Coolant Bottle ) Change 21 Air Compressor Hose Change ( Each ) 22 Air Compressor O / H 23 Air Compressor Head O / H 24 Air Pressure Pipe Change ( Each ) 25 Aux Relay Change 26 Brake Booster O / H 27 Bonnet Lock Replacing 28 Brake Booster Removing & Refitting 29 Brake Liner Changing Per Wheel 30 Brake Setting 31 Bumper Removing & Refitting 32 Booster Brake Hose Change ( Each ) 33 Booster Blst Removing & Refitting 34 Bell Housing Removing & Refitting 35 Br Vaccum Cly Change 36 Brake Liner Refitting ( Each ) 37 Blinker Light Change 38 Brake Disc Rotor Change Each 39 Battery Wire Legs Soldering 40 Battery Wire Removing & Fitting 41 Booster Diaform Changing 42 Complete Greasing 43 Center Joint Rubber Changing 44 C J Brg Bkt Removing & Refitting 45 Clutch Master Cyl. Removing & Refitting 46 Cl Paddle Spr Change 47 Crank Pully Replace 48 Clutch O / H 49 Clutch Pipe Changing 50 Brake Air Bleeding 51 Brake Setting Fourwheel 52 Clutch Setting 53 Clutch Cly Hose Change Air Bleeding 54 Clutch Sleeve Cyl. Removing & Refitting 55 Cl Paddle Pin Bush Kit Change 56 Clutch Cable Replace 57 Coolant Changing 58 Crown Pinion O / H ( Differential ) 59 Cylinder Head Gasket Changing 60 Cylinder Head Assy Removing O / H And Refittng 61 Cross-Member Assy Removing & Refittng ( Per Member ) ( Front Engine, Rear Engine Centre Joint, Rear Spring, Rear End ) 62 Cam Oil Seal Change 63 Comp Vehicle Scaning 64 Clutch Booster Change 65 Cluster Assy Removing & Refitting 66 Clutch Plate Liner With Revit Fitting 67 Clutch Pad With Revit Fitting 68 Complete Joint Through Check Up 69 Complete Wiring Harness Front To Rear Change 70 Combi Switch Change 71 Drag Link Replace 72 Drag Link Kit Change 73 Drum Cutting Per Wheel 74 Eng Drain Plug Change 75 Ddu Kit Removing & Refitting 76 Ddv Valve Opening & Fitting 77 Diesel Filter Changing 78 Diesel Pipe Change Air Lock Repair 79 Diesel Tank Removing & Refitting 80 Door Lock Reparing / Repl Lhs / Rhs 81 Diesel Tank Patti Change 82 Dual Brake Valve Removing And Refitting 83 Diesel Tank Servicing 84 Differential Packing Changing 85 Differential Oil Change 86 Dashboard Removing Refitting 87 Electrical Checkup 88 Complate Light Checkup Wiring Repair 89 Engine O / H 90 Engine Remove & Refitting 91 Engine Mounting Repacement 92 Engine Oil With Filters Changing 93 Engine Rear Oil Seal Changing W / O Gb Rate 94 Eng Mounting Bkt Change 95 Engine Side Cover Packing Changing 96 Crank Sensor Replace 97 Cam Sensor Replace 98 Exhaust Mainfold Assy Removing & Fitting 99 Eng Crank Sensor Replace 100 Eng Cam Sensor Replace 101 Ecu Removing & Fitting 102 Egr Removing & Fitting 103 Egr Pipe Change ( Each ) 104 Electrical Florn Change 105 Elect Horn Wiring Change 106 Elect Flasher Change 107 Fan Belt Fitting 108 Fan Belt Changing 109 Pressure Horn Change 110 Pressure Horn Wiring Replace 111 Feed Pump Kit Changing 112 Fip / Nozzle Removing & Refitting 113 Fly Wheel Grinding 114 Fly Wheel Removing & Refitting 115 Front Axle Removing & Refitting 116 Front Guard Removing & Refitting 117 Four Wheel Bleeding Air Bleeding 118 Fuel Line Removing & Refitting 119 Fuel Stainer Changing 120 Fuel Filter Strainer ( Mini Glassi ) Removing And Refitting 121 Fuel Filter Change 122 Fip Mounting Bkt Replace 123 Front Brake A Jester Removing And Refitting ( Each ) 124 Fan Clutch Assy Change 125 Front Brake Cam O / H 126 Front Brake Acuater O / H 127 Front Main Axle Spindle Removing Metalising, Grinding, Truing & Fitting 128 Front Side Light Assy Change ( Each ) 129 Fuse Box Change 130 H L Wiring Loom Change 131 Four Way Piano Switch Change 132 H L Bulb Repace Each 133 Gear Box O / H 134 H L Relay Replace Each 135 Gear Liver Braket Changing 136 Gear Liver Bush Changing 137 Gear Main Shaft Oil Seal Changing W / O Gb Remove 138 Gear Oil Changing 139 Gear End Change 140 Gear Top Cover / Pkg Changing 141 Gear Top Cover O / H 142 Gear Top Shaft Oil Seal Changing 143 General Checkup 144 Gear Box Removing And Refitting 145 Gear Liver Setting 146 Gear Box Bolt Change 147 H Br Liver Replace 148 Hand Brake Setting 149 Hand Gasket Changing 150 Hub Greasing Per Wheel Front 151 Half Engine O / H 152 Hub Greasing Per Wheel ( Rear ) 153 Hand Brake Valve Removing & Fitting 154 Head Lamp Assy Change ( Each ) 155 Hazard Warning Switch Change 156 Heater Plug Replace Each 157 Heater Timmer Replace 158 Heater Wiring Loom Replace 159 H L Wiring Replace 160 H L Relay Replace 161 Intercooler Removing & Refitting 162 Inter Cooler Servicing 163 Inlet Mainfold Assy Removing & Fitting 164 Joint Assy Removing & Refitting 165 Joint Cross Replacing 166 Joint Nut Bolt Changing 167 King Pin O / H B / Side 168 King Pin Bush Removing, Fitting & Grinding 169 L Press Switch Change 170 Leak Of Pipe Replace 171 Leaf Spring O / H Front One Side 172 Leaf Spring O / H Rear One Side 173 Frt Spring C Blot Replace Each 174 Leaf Spring Bush & Pin Opening Refitting One Side 175 Rr Spring C Bolt Replace Each 176 Leaf Hanger & Shakle Opening & Refitting One Set 177 C Bolt Head Cutting By Gas Cutter Each 178 Multe Function Module Removing And Fittiing 179 Helper C Bolt Repace Each 180 Mini Relay Change 181 Main Line Switch Change 182 Frt Spring U Bolt Replace Each 183 Nipple Greasing 184 Rr Spr U Bolt Replace Each 185 M Cly Assy Change 186 Nozzle Pipe Change Each 187 Nozzle & Injector Removing And Fitting 188 Oil Dip Stick W / Tube Change 189 Oil Chamber Packing Changing 190 Oil Cooler Line Replace 191 Oil Cooler Gasket Changing 192 Oscilating Fan Remvoing & Fitting 193 Oscalating Wiring Loom New Fitting 194 P..T.O Pump Assy Changing 195 P.T.O Gear Assy Removing And Fitting 196 Pto Oil Change 197 P.T.O Uj Assy Removing And Fitting 198 P.T.O Uj Cross Removing And Fitting 199 P / Shaft Uj Cross Removing & Refitting 200 P / Steering Vain Pump Kit Changing 201 Pinion Oil Seal Changing 202 Power Steering Box O / H 203 Pinon Flange Removing & Refitting 204 Power Steering Pump Removing & Fitting 205 Pressure Plate O / H 206 Power Steering Hose Change ( Each ) 207 Power Steering Oil Filter Cahnge 208 Power Strg Containers Change 209 Pressure Horn Change 210 Radiator Removing & Refitting 211 Rear Axle Oil Changing 212 Rear Axle Removing & Refittng 213 Rear Axke Pkg Replace Each 214 Return Valve Changing 215 Rear View Mirror Removing & Fitting 216 Rear View Mirror Bracket Remvoing Fitting 217 Radiator Top & Bottom Opening Servicing & Refitting 218 Rear Brake A Jester Removing And Refitting ( Each ) 219 Rear Brake Cam O / H 220 Relay Valve Removing & Refitting 221 Rear Brake Acuater O / H 222 Revolving Light Removing & Fitting 223 Radiator Bracket Removing, Repairing & Refitting 224 Radiator Fan Motor Replace 225 Radiator Hose Change ( Each ) 226 Rev Light Switch Change 227 Rev Light Wiring Loom Replace 228 Strg Gear Box O / H 229 Str Bolt Nut Change 230 Silencer Removing & Refitting 231 Revelving Light Wiring Loom Replace 232 Silencer Rumbber Hanger Changing 233 Revelving Light Switch Replace 234 Spv Removing & Reffitting 235 Starter O / H 236 Steering Box Oil Seal Changing 237 Steering Column Bush Changing 238 Steering Cross Changing 239 Steering Gear Box Removing & Refitting 240 Sterring Oil Changing 241 Silencer Below Removing And Refitting 242 Silencer Op Setting 243 Steering Cross Assy Removing & Fitting 244 Steering Yoke And Teeth Removing & Fitting 245 Starter Removing & Refitting 246 Stop Light Switch Change 247 Speedo Cable Change 248 Starter Carbons Soldering 249 Spring Hanger Nut Bolt 250 Speedo Sensor Change 251 Siron Removing & Fitting 252 Speedo Sensor Wiring Replace 253 Starter Push Button Change 254 Timming Assy O / H 255 Temp Transduser Replace 256 Tappet Setting 257 Siron Wiring Loom Replace 258 Tie Rod / Drag Link Kit Changing 259 Siron Switch Replace 260 Timing Cover Oil Seal Changing 261 Strg Lock Cum Ign Switch Replace 262 Strg Wheel Opening Fitting 263 Timming Tensor Change 264 Thermoslate Elbow Change 265 Temp Switch Replace 266 Turbo Charger Assy Change 267 Turbo Charger O / H 268 Turbo Charger Removing And Refitting 269 Tappet Cover Opening & Refitting 270 Tyre Wheel Opening & Fitting ( Front ) 271 Tyre Wheel Opening & Fitting ( Rear ) 272 T L Wiring Replace 273 Tail Lamp Assy Change ( Each ) 274 Upper Cooling Line Replace 275 Uj Rear Teeth Welding & Fitting 276 Thermoslate Replace 277 Tail Lamp Loom Repair / Change 278 Tank Unit Change 279 Uj Front Teeth Welding & Fitting 280 Side Indicater Light Change Each 281 Uj Half Yoke Welding & Fitting ( Each ) 282 Wiring Socketreplace Each 283 Water Pump Changing 284 Tie Rod Kit Replace 285 Water Seperator Changing 286 Wiper Wiring Loom Replace 287 Wheel Alignment 288 Wiper Int Relay Change 289 Wiper Linkage Removing & Fitting 290 Wiper Wheel Box Removing & Fitting ( Each ) 291 Wiper Arm Blade Removing & Fitting ( Each ) 292 Wiper Motor O / H 293 Wiper Motor Removing & Fitting 294 Wheel Mounting Pin Change ( Each ) 295 Wheel Cly Change Per 1 Eng Cam Nut Bolt 2 Eng Mounting Nut Bolt 3 Fly Wheel Bolt 4 Cly Head Bolt 5 Cly Head Nut Coller 6 Manifold Nut Bolt 7 Ex & Inl Fitting Bolt 8 Tappet Cover Bolt Long 9 Chember Fitting Bolt 10 Cooling Plate Bolt 11 Timming Cover Bolt 12 Timming Pully Bolt 13 Self Fitting Stud W / Nut 14 Radiator Fitting Bolt Nut 15 Alta Fitting Nut Bolt 41 Alt Fitting Kit 16 Aiit Setting Bolt 17 Comp Head Fitting Bolt 18 Turbo Fittnig Nut Bolt 19 Boash Pump Fitting Bolt 20 Clutch Rounding Bolt 21 Press Plate Fitting Bolt 23 G Box Fitting Bolt 24 Cross Member Fitting Bolt 25 G Tapa Bolt 26 Joint Bolt 27 Joint Nut Lock 28 Joint Lock Plate 29 C J Bkt Nut Bolt 30 M S Nut 31 C J Nut 32 Pinnion Nut 33 Crown Stud Long 34 Crown Stud Mid 35 Crown Chappa Bolt 36 Crown Stud Small 37 Crown Nut For Stud 39 Crown Setting Bolt Rel Thessi 40 Str Cross Bolt W / Nut 42 Crown Wheel Fitting Bolt 22 Axle Stud W / Nut 43 Crown Drain Plug 44 Gear Drain Plug 45 Frt Hanger Nut Bolt 44 Rear Hanger Nut Bolt 45 Str Bkt Fitting Nut Bolt 46 Third Arm Bolt W / Nut 47 Thali Nut Bolt Frt 48 Thali Nut Bolt Rr 49 Axle Plate Bolt 50 Rr Axle Check Nut 51 Frt Spindle Nut 52 Air Tank Fitting Nut Bolt 53 Diesel Tank Fitting Nut Bolt 54 Br Booster Fitting Nut Bolt 55 Air Filter Fitting Nut Bolt 56 Helper Bkt Fitting Nut Bolt 57 Crown Lock Patti 58 Main Brg Bolt 59 Con Rod Bolt 60 Con Rod Nut Collered
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
27.
Educational and Research Institute #10541782 Price Bid
Auction Sale Of Disposal Of Unserviceable Instrument Equipment And Tents Etc - 1 Angithi Iron 2 Air Conditioner 3 Axes Country 4 Aquagaurd, Eureka Forbes 5 Aquagaurd Cooler Cum Purifier, Eureka Forbes 6 Adjustable Wrench / Spanner 7 Bicycle 8 Briefcase Assorted 9 Board Large Assorted 10 Bucket Zinc 11 Bag Boston / Leather 12 Balance Spring 13 Box Light 14 Black Board Rolling 15 Box Steel Assorted 16 Badges Brass Shoulder 17 Black Board With Stand 18 Badges Brass For Cloth Belt 19 Cushion Chair 20 Chonga Small 21 Chonga Large 22 Clock Wall, 23 Crow Bar 24 Cooler Desert 25 Chisel 26 Ceiling Fan, 27 Degchi Aluminum 28 Colour Slide Set For Photography 29 Door Matt 30 Electric Heater 31 Exhaust Fan 32 Electric Tea Maker 33 Fire Extingusher Soda Acid 34 Fire Extingusher Co2 35 Fire Bucket 36 Fire Bucket Stand 37 Fan Pedestal 38 Fan Wall 39 Generator Assorted 40 Gong Bell 41 Gas Petromax Mini 42 Heat Convector / Blower 43 Hit Pillar, 44 Hammer Iron Assorted 45 Hair Dryer, 46 Hot Case 47 Hand Pump 48 Hacksaw Frame 49 Fire Bucket Stand 50 Ice Axe 51 Intercom Phone 52 Jurricane 20 Ltr. 53 Jute Matting 54 Lantern Hurricane 55 Lancet For Snake Bite 56 Metric Weight 57 Pressure Stoves 58 Plier Cutting 59 Pointer Rod Wooden 60 Pipe Wrench 61 Petromax K. Oil 62 Prestograph Board 63 Pressure Cooker 64 Photocopier 65 Rain Cot 66 Scissor Small Assorted 67 Scissor For Medical Box 68 Screw Driver Assorted 69 Saw Hand 70 Torch Assorted 71 Typewriter 72 Typewriter Bilingual 73 Trolley Steel Hand 74 Thermos Flask 75 Vacuum Cleaner 76 Voltage Stabilizer 77 Vending Machine Make Godrej 78 Vertical Stand 79 Water Filter 80 Weight Lead / Glass 81 Wash Basin Enameled 82 Water Stand 83 Water Tanki 84 Zinc Plate 85 Mosquito Net 86 Umbrella Country 87 Tullu Pump 88 Tray For Angithies 89 Light Emergency 90 Cycle Stand 91 Scale Brass Weighing 92 Tarpoline Assorted 93 Durries For ‘A’ Tent 94 Durries For I Tent 95 Durries Assorted 96 Tent ‘B’ 97 Tent ‘E’ 98 Tent ‘D’ 99 Tent ‘F’ 1 Binoculars 2 Bar Substance 3 Calculators 4 Compass Proportional 5 Divider Small 6 Divider Large 7 Clinometers 8 Hold All Canvas 9 Leveling Staves 10 Leveling Machine Ni 11 Leveling Machine Er Watts 12 Leveling Machine Cook Thorough 13 Leveling Machine Wild 14 Leveling Machine Wild 15 Gem E-700 Franking Machine 16 Level Pt Assorted 17 Digital Level Dini 12 18 Magnetic Compass 19 Pantograph 20 Planimeter 21 Plum Bob 22 Rule Straight Edge 12’ / 18’ 23 Plane Table Top 24 Plane Table Stand 25 Press Hand Mio Pattern 26 Hp Plotter 500 Ps 27 Rule Parallel On Roller Electrum 28 Rule Straight Edge 24” 29 Rule Parallel Electrum 30 Sight Rule 31 Set Square 45 / 60 Assorted 32 Scale Marques Electrum 33 Tape Steel / Linen 34 Umbrella Surveying 35 Winder For Film 36 Gps Pathfinder Trimble 37 Gps Hand Held Garrmin 38 Total Station Topcon Gts 722 39 External Cd Writer Iomega 40 Mobile Mapping Sytem, Palm Top Dell Axim X 5 Pocket Pc, Gps Hand Held Garmin 41 Colortrac Smart Lf Cx40 Scanner 42 Hp Plotter Cum Scanner Design Jet 800 Ps, Design Jet 815 Mfp 43 Ups 44 Hp Plotter A0 Size 800 Ps 45 Palm Top Dell Pocket Pc Axim X 5 46 Total Station Nikon 47 External Hard Disc 1 Barometers 2 Binocular Prismatic 3 Battery Pack Theodolite 4 Clinometers 5 Circle Pen 6 Compass Proportional 7 Compass Magnetic 8 Compass Beam 9 Compass Engraving 10 Cvt 11 Divider Large 12 Divider Small 13 Edm No.-Di-20-41366 14 Electric Dotter 15 Electric Calculator 16 Edm No.-Di-4L-45502 Led 17 Citation 001 18 Citation 0032 19 Edm Instrument Citation 8549 20 Glass Magnifying 3 & 4 21 Glass Magnifying 2 22 Global Positioning System , Ashtech 23 Global Positioning System , Ashtech 24 Global Positioning System, Ashtech 25 Global Positioning System , Ashtech 26 Global Positioning System , Ashtech 27 Gps Hand Held ) 28 Trimble Gps Receiver Type-I 29 Helio Troopes 4 30 Holdall Canvas 31 Hand Dotter 32 Hand Punch Machine, Typing Machine 33 Iron Shoes For Level Staves 34 Instrument Box Set No.-1 35 Levelling Staves 36 Level P.T. 37 Linen Tester 38 Line Measuring Microscope Small 39 Lettring Set 40 Niddle Sharpner Black Stone 41 Mobile Mapping System With Palm Top Gps Garmin12 Channel 42 Modies Plane Paper Photo Stat Copier 43 Pen Type Graver 44 Panto Graph 32 45 Trimble Make-Gps Receiver Type-Ii, No.- 0224072009, 0224072020 46 Panto Graph 2.5 47 Plumbob 48 P.T. Top 49 P.T. Top Cover 50 P.T. Screw 51 Pen Drawing L / Nib 52 Protector 53 Pricker 54 Pen Drawing Double Road 55 Height Indicator 56 Pen Drawing Curve 57 Planimeter 58 Plate Zinc Plane , Size 27X27X1 / 8 59 Plate Iron Plane , Size 27X27X1 / 8 60 Hp Design Jet 800 Ps Plotter 61 Pro Circle 62 Reflector For Edm 63 Rule Flat 24 64 Rule Parallel 6 65 Rule Ebonite 18 66 Rigid Graver 67 Rule Straight Edge 48 68 Rule Straight Edge 24 69 Rule Straight Edge 36 70 Trimble Gps-5700 Dual Frequency 71 Rule Straight Edge 1Mtr. 72 Rule Straight Edge 0.5 73 Rule Straight Edge 1.5 Mtr. 74 Sight Rule Wooden 75 Stand For Wild Theodolite 76 Straight Line Graver With Optic 77 A.O. Size Color Scanner Vidar 78 Swivel Graver With Optic 79 Stereo Scope Pocket 80 Set Square 45 Degree 81 Set Square 60 Degree 82 Staves Travers 83 Set Square Small Set 4 84 Stand For P.T. Survey Pattern 85 Screw Driver 86 Sight Rule Brass 30X24 87 Swivel Knife 88 Scale Diognal 1Mtr. 89 Scale Diognal 36 Brass 90 Scale Diognal 24 91 Scale Diognal 1.5 Mtr. 92 Scale Diognal Brass 64=1Miles 93 Scale Diognal Brass 16=1Miles 94 Tape Measuring Linen 30 Mtr. 95 Theodolite Dietzen No.-101802, 101754 96 Theamameter Chemical 97 Umbrella Surveying 98 Ups 500 Va Power Invertor 99 Ups 10 Kva ( Apc Make ) With Battery 100 Apc 500Va Ups 101 Washer P.T. Survey Pattern 102 Vaccume Cleaner Eureca Forbes 103 Exturnal Hard Disk-120Gb 104 Exturnal Hard Disk-40Gb / 80Gb 105 Exturnal Hard Disk-160Gb 106 Exturnal Hard Disk-160Gb 107 Automatic Voltage Stablizer 108 Automatic Voltage Stablizer 109 Automatic Voltage Stablizer 110 Automatic Voltage Stablizer 111 Window Type Ac 1.5 Ton Carrier 112 Window Type Ac 1.5 Ton Carrier 113 Window Type Ac 1.5 Ton Carrier 114 Window Type Ac 1.5 Ton Carrier 115 Modem Externel 56K 116 Hp Cd Writer External 117 Angithi Iron 118 Ash Tray 119 Axe Country 120 Bucket Fire 121 Basin Enameled 122 Bicycle, 123 Balance Spring 50 Kg 124 Balance Spring 100 Kg 125 Brass Seal 33 Party 126 Bag Cash Cloth 127 Bucket Zinc 128 Badges Red Cloth 129 Belcha ( Spade ) 130 Brief Case 131 Balance Counter 15 Kg 132 Balance Measuring With Weight 133 Badges Brass For Leather Belt 134 Chonga Large 135 Chonga Small 136 Cash Chest Godrej 137 Cup Aluminum 138 Chisel Iron 139 Chair Cushion 140 Cash Chain Iron 141 Crow Bar 142 Central Junction Telephone 143 Camp Cot Folding 144 Cabinet Bisarekas With Tray Wooden 145 Drum Water 146 Drum Barrels 147 Doas 148 Desert Cooler 149 Door Mats 18X36 Inch 150 Dinner Set Steel 151 Electric Heater 152 Electric Press 153 Electric Table Lamp 154 Electric Kettle Racold 155 Fire Bucket Stand Without Shade Iron 156 Fire Bucket Stand With Shade Iron 157 Fire Extinguisher Soda Acid 158 Fire Extinguisher Co2 159 Fan Ceiling 48 Inch 160 Fire Extinguisher Water Co2 161 Gong Bell 162 Ground Sheet 163 Generator Honda-5.0 Hp 164 Generator Honda-300 165 Generator Birla Yamaha, 166 Grass Cutter 167 Gas Petromax 2.8 Kg 168 Hot Water Bottle 169 Haver Sack Bag 170 Heater Air Flow 171 Hammer Iron 172 Ice Axe 173 Jute Matting Assorted 174 Kettle Aluminum 175 Weight Lead 12 0Z 176 Weight Lead 24 0Z 177 Weight Lead 04 0Z 178 Lantern Hurricane 179 Mosquito Net 180 Mullet Iron No. 04 181 Mullet Iron No. 06 182 Needle Packing 183 Pressure Cooker 184 Pressure Stoves Parbhat 185 Petromax Lamp 186 Panels For Exhibitions 187 Pick Axe 188 Pharwa 189 Pliers Cutting 190 Presto Sign Board 191 Pedestal Fan 192 Pen Knife Ordinary 193 Rain Coat 194 Rat Trap 195 Saw Hand 196 Stand Iron For Iron Bucket 197 Scissor Grass Cutting 198 Steel Box Pts Sections 199 Steel Box Fdos 200 Steel Box Assoted Size 201 Typewriter Portable 202 Typewriter Electronic Godrej, 203 Typewriter Make :-Remington 204 Tray For Angithies 205 Torch 02 / 03 Cell Assorted 206 Transistor 207 Tullu Pump 208 Trolly For Cooler 209 Telephone Set 210 Telephone Set Tele Communication 211 Thermometer Clinical 212 Umbrella Country 213 Voltage Stabliser 214 Water Filter, 215 Water Bottle 216 Water Cane ( Phawara ) Made By Gi Sheet 217 Wall Clock 218 Water Cooler, 219 Trey Wooden For File 220 Box Wooden Camp Office 221 Steel Box 42X36X30 222 Packing Case Wooden 223 Power Inverter 0.5 Kv 224 Power Inverter 1.0 Kv 225 Steel Box 28X17X14 226 Kanni 227 Padlock Navtal 2.5 Inch 228 Padlock Harrisonl 2.5 Inch 229 Padlock Navtal 5 Levers 230 Padlock Assorted 231 Padlock Harrison Small 2 232 Wooden Box For Fire Extinguisher 233 Ice Knife 234 Shredder Machine, 235 Aquagaurd 200 ( A.G ) 236 Tea Coffee Vending Machine 237 Lamination Machine 238 Ups-Apc 1Kva Line Interactive 239 Jerry Cane 20 Ltr. 15 240 B. D. Blouse 241 Boot Hunter 242 Blanket Woolen, Barrack Black 243 Boot Ammunition 244 Blanket Officer Quality 245 Bed Sheets With Pillow Covers 246 Cap Balaclava Woolen 247 Coat Parka Nylon 248 Coat Parka Cotton 249 Gloves Woolen 250 Cloth Tapestry 251 Jersey Woolen 252 Mattress Kapok 253 Patti Woolen 254 Pillows 255 Ruck Suck 256 Sleeping Bags 257 Under Pants 258 Under Shirts 259 Wind Cheater 260 Almirah Wooden For Record 261 Box Wooden Assorted 262 Box Wooden Surveyor 263 Chair Camp Folding Steel 264 Chair Nestling Type 265 Chair Office Wooden Assorted 266 Chair Steel Office Assorted 267 Chair Steel Revolving 268 Chair Office Dunlop Seat 269 Chair Godrej Revolving 270 Godrej Integrated Workstation 271 Chair Revolving For Computer 272 Key Box Wooden 273 Rack Book Wooden Folding 274 Rack File Wooden, 3X3x14 275 Rack Office For Paper 276 Rack File Wooden Big Size 277 Steel Rack Folding Assorted , 6X3, 6X18 278 Stool D / Man Folding With Iron Leg 279 Stool Oval Plain Wooden 280 Scribing Table 281 Stool D / Man Wooden Locker Type 282 Stool Canvas Leather With Iron Leg 283 Side Rack Steel 75X62x35 284 Stand Wooden For Basin 285 Steel Cabinet Assorted Sizes 6 Drawer 286 Show Case Wooden 287 Almirah Wooden Assorted With / Without Doors 288 Table Combination With Drawer 289 Table Office Folding Wooden 290 Table Drawing Non Folding Wooden 291 Table Camp Folding Steel 292 Table Office Steel 293 Table Drawing Folding Wooden 294 Trestle Wooden 295 Table Secretariat 296 Table Executive 297 Table Computer 48X24x30 298 Wooden Choki 299 Board Size 6.5X13.5 300 Table Ramp Acrylic 301 Scroll Board 302 Scribing Light Box 303 Steel Almirah Assorted Size 304 Steel Cabinet Assorted Sizes 4 Drawer 305 Cabinet Pigeon Hole 306 Tarpoline 12X12 307 Tarpoline 10X10 308 Tarpoline 9X9 309 Tarpoline 8X8 310 Tarpoline 7X8 311 Tent ‘B’ Class 312 Tent ‘D’ Class 313 Tent ‘E’ Class 314 Tent ‘K’ Class 315 Tent ‘I’ Class 316 Nylon Tent Medium Size 317 Tent Arctic 318 Durries For Tents 12X12 319 Durries For Tents 9X9 320 Durries For Tents 8X8 321 Durries For Tents 7X8 322 Durries For Tents 10X10 323 Outer Fly For Tent ‘I’ 324 Tent ‘J’ Class Nylon / Canvas
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Uttarakhand View Result →
28.
Tourism #10503812 Price Bid
Supplying Installation Testing And Commissioning Of Kitchen And Bar Equipments For New Hotel Of Hptdc At Kiarighat Distt Solan (H.P) Supplying Installation Testing And Commissioning Of Kitchen And Bar Equipments For New Hotel Of Hptdc At Kiarighat Distt Solan (H.P) , Supplying, Installation, Testing And Commissioning Of Pantry Landing Chute Frame Work Ms Of Size 48”X24”X34”+ 18”X12”, Top - Ss 16 Swg Ss 304 Garbage Chute & Over Shelf – 18 Swg Ss 304 Sunk In Top, Overhead Landing Shelf 16 Swg Ss 38 Mm Round Pipe With Adjustable Nylon Bush 32 Mm Ss 16 Swg Round Pipe For Cross Support All Joints Duly Argon Welded, Ground & Buffed Fabricated As Per Specifications Complete In All Respects. , Supplying, Installation, Testing And Commissioning Of Single Burner High Pressure Range S.S. 304 Gradesize 24”X24”X24” With Height 18 Inch With Regulator And Pipe Complete In All Respects. , Supplying, Installation, Testing And Commissioning Of Convection Oven (Electrical) Of Size 66”X30”X66” Structure Made Of Mild Steel Angle Duly Rust Proof Painted, Top Made Of 16 Swg Food Grade Ss Sheet 304 Grade Double Walled Insulated Body Inner & Outer M.S Sheet Front Side S.S. Sheet 304 Grade With Counter Weight Balance Door. Fitting With Air Type Heating Elements, With Rotary Switch, Auto Temp Controller And Indicating Lamp. Provided With A See Through Toughened Glass On Door. A Light Inside Provided With A Wire Meshed Tray With Temp. Controller, Alarm. Temp Clock Indicator, Adjustable Bullet Feet Electrically Operated 3 Phase. Proofing Chamberwith Box Dimension 48X36x24’’Complete In All Respects Bargay/Sinmeg Or Equivalent , Supplying, Installation, Testing And Commissioning Ofs.S. 304 Grade Work Table Size 48”X24”X32” With 4’’ Up Edgeswith 4 Shelves And Double Door (House Keeping Store- 3 No.) Complete In All Respects. , Supplying, Installation Testing And Commissioning Ofss 304 Grade Work Table Size 36”X24”X32” With 2 Shelves And Double Door Complete In All Respects. , Supplying, Installation Testing And Commissioning Ofss 304 Grade Table Size 48”X24”X34”+18”+12” With 2 Under Shelves With Vertical Sport Pipes And 1 Over Head Tray Shelve With 4 Up Edges Complete In All Respects. , Supplying, Installation Testing And Commissioning Ofss 304 Grade 16 Gauge Ss Sheet Work Table Size 48”X24”X32” With Under Counter Shelves Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofss 304 Grade Work Table/Counter Size 36”X24”X34+18”+12”” With 4’’ Up Edges With Two Door Under Counter Refrigerator Cum Freezer With Overhead Shelves Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofss 304 Grade Work Table/Counter Size 48”X24”X32” With 4’’ Up Edges With 2 Door Under Counter Refrigerator Cum Freezer Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofss 304 Grade Food Pickup Counter Size 48”X24”X32”+18”+12” With Under Counter Hot Case With Overhead Warmer Shelf Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofwet Grinder Size 24”X24”X30” Heavy Duty Ss Jar 15 Litres Capacity, Motorkirloskar Electrically Operated Single Phase Complete In All Respects , Supplying, Installation, Testing And Commissioning Ofwet Grinder Size 16”X16”X30” Heavy Duty Ss Jar 5 Litres Capacity, Motorkirloskar Electrically Operated Single Phase Complete In All Respects , Supplying, Installation, Testing And Commissioning Ofthree Burner High Pressure Range Size 60”X30”X34”+6” Made Of 16 Swg Ss 304 Grade Top With 200X200 Mm Ms Pan Support 12 Mm. M Type Burner. 18 Guage Ss 304 Grade Ash Tray Provided Below The Burners. Front Side And Back Panels Of 20 Swg S.S 304 Grade 38X38x3 Mm Boxed Frame Work With Copper Pigtails With Regulator And Pipe Complete In All Respects. , Supplying, Installation, Testing And Commissioning Oftwo Burner High Pressure Chinese Range Size 48”X30”X30”+18” Made Of 16 Swg Ss 304 Grade Top With 200X200 Mm Ms Pan Support 12 Mm. Chinese Wok Two Burner Range, 2 Chamber Model With An Easy To Access Manually Control Swing Faucent Front Gas 1.5” Many Fold For Each Burner And Flexible Burner, Burner Type Configuration A Heavy Duty Ss Construction Anti Tarnish No Corrosion With Water Cooled Top Ss Front Pipe Rack And Splash Guard.Cast Iron Burner Cover For Directing More Heat In The Walk Removable Back Slash And Heavy Duty Portability Casters For Moving The Unit Complete In All Respects. , Supplying, Installation, Testing And Commissioning Offour ( 2 High Presser + 2 Low Presser) Burner Range Size 30”X30”X34”+6” Made Of 16 Swg Ss 304 Grade Top With 200X200 Mm Ms Pan Support 12 Mm. Sun Flame Burner. 18 Gauge Ss 304 Grade Ash Tray Provided Below The Burners. Front Side And Back Panels Of 20 Swg S.S 304 Grade 38X38x3 Mm Boxed Frame Work With Copper Pigtails With Regulator And Pipe Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofplanetary Mixer Bowl Capacity 20 Litres, Suitable For 3 Phase Electric Supply Crompton Motor : Kirloskar 3 Hp , Voltage 240V/50H Complete In All Respects Spar/Begaya Make Or Equivalent , Supplying, Installation, Testing And Commissioning Ofbainmarie Size 30”X24”+12”X34” ½ Gn Pan Deep With Lid Ss 304 Grade Electrically Operated Auto Cut Off-Overheat Protection, Single Steam Compartment Rectangular 4 Food Compartment Of Round Dish Of 8 Litres Each Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofdomestic Double Burner Range, Top Glass Finish With Regulator And Pipe Complete In All Respects Sunflame/Kaff/Glen Make. , Supplying, Installation, Testing And Commissioning Ofdouble Door Bottle/Glass Back Bar Chillier 300 Litre Size 24”X30”X66” Glass Door With 4 Shelves Temperature Range 2-8 Degree Celsius Refrigerant Type R134a Gas Supply Voltage 240/50 Complete In All Respects Uronova/Western/Voltas/Blue Star Make. , Supplying, Installation, Testing And Commissioning Ofdeep Freezer Of Size 48”X30”X81” Consisting 4 Doors Vertical 700 Litre Ss 304 Grade (Outer And Inner Body) Refrigerant Gas R134 A With Digital Temp. Display Complete In All Respects Euronova/Blue Star/Voltas/Western Make. , Supplying, Installation, Testing And Commissioning Ofsemi-Automatic Commercial Ice Cube Machine Of Size 30”X28” Flakes, Cube Size 1X1’’ Capacity 100Kg /Day Power 1Kw, Storage Capacity 50 Kg. Complete In All Respects Celforse/Manitowoc/Scotsman Or Equivalent Make. , Supplying, Installation, Testing And Commissioning Ofdomestic 3 Jar Mixer Grinder Size Standard Of 1000 Watts (1 Hp)Capacity 2 Liters Usha/Sujata/Bajaj Make Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofice Cream Box Freezer As Per Detail Given Below:- Size 36”X24”X36”, Capacity 200 L, Brand Blue Star/Euronova/Voltas/Western Door Type Top Open Door Type Of Freezer Deep Freezer Power Source Electrical Frequency 50-60 Hz Voltage Volt 230V , Supplying, Installation, Testing And Commissioning Ofss 304 Grade Rack Size 48”X24”X72”Closed Dim With 4 Racks (Pot Racks) Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofmicrowave/Grill Solo, Standard, 21 Litres Commercial Of Size 12”X20”X14” Complete In All Respects Lg/ Samsung/Ifb Make. , Supplying, Installation, Testing And Commissioning Oftandoortraditional Tandoor Standard, Medium Size 36X36X36 50 X 50 # 16 Swg Ss 304 Grade Box Type Welded Angle Frame - Ss Angles Reinforced On All Sides And Bottom And Intermediate Position. - Exterior Of Base Reinforced With Inverted Heavy Gauge Ss Channel Frame And Suitable To Fix Castors - Stainless Steel Handle On Each Side - Stainless Steel Insulated Removable Cover With Handle And 400 Mm Dia Cl Ring Place On Top Mouth - 50 Mm Thick Tightly Packed Glasswool On All Sides And Top - 25 Mm Thick Commercial Tandoor Clay Slab Insulation At Base - Provide Slide Up Insulated S/S Shutter With Recessed Handle And Stopper For Ash Removal And Charcoal Filling Complete In All Respects. (Charcoal & Gas Fuelling) , Supplying, Installation, Testing And Commissioning Oftandoor Traditional Tandoor Standard, Medium Size 30X30X36 50 X 50 # 16 Swg Ss 304 Grade Box Type Welded Angle Frame - Ss 304 Grade Angles Reinforced On All Sides And Bottom And Intermediate Position. Exterior Of Base Reinforced With Inverted Heavy Gauge Ss 304 Grade Channel Frame And Suitable To Fix Castors - Stainless Steel Handle On Each Side - Stainless Steel Insulated Removable Cover With Handle And 400 Mm Dia Cl Ring Place On Top Mouth - 50 Mm Thick Tightly Packed Glass Wool On All Sides And Top - 25 Mm Thick Commercial Tandoor Clay Slab Insulation At Base - Provide Slide Up Insulated S/S Shutter With Recessed Handle And Stopper For Ash Removal And Charcoal Fillingcomplete In All Respects.(Charcoal & Gas Fuelling) , Supplying, Installation, Testing And Commissioning Ofmasala Rack Ss 304 Grade Of Size(24X12X60) With 5 Racks With Heavy Quality Wheels Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofrack Ss 304 Grade Of Size 48”X24”X72” Back And Two Side Cover Front Open With 4 Racks (F&B Store-4 No.) Complete In All Respects. , Supplying Ofms Almirah Size 36”X20”X72” Standard Powder Coated With 6 Shelves ( Godrej Interio) (3 For Housekeeping) Complete In All Respects Godrej/Interio Or Equivalentmake. , Supplying, Installation, Testing And Commissioning Ofcoffee Machine With Grinder (Double Short) Steamer As Per Detail Given Below:- Size : 16X14x13” Power : 2000W Phase : Single Production Capacity : Upto 150 Cups In Half Hour Dimension (Standard) Weight : 11 Kg (Approx) Make: Carilmali/Astoria/ Or Equivalent , Supplying, Installation, Testing And Commissioning Ofgriddle Plate/Dosa Tawa Size 36”X24”X34”, Gas Operated Front Side And Back Panels Of 20 Swg, Ss 304 Grade Boxedplate Type Cast Iron, Seasoned12 Mm Thick Ms Plate Ss Oil Container Of 1Litre Capacity Material Framework Ms Number Of Knob 2Finish Polished Complete In All Respects , Supplying, Installation, Testing And Commissioning Ofpantry Ss 304 Grade Table Size 66”X24”X34”+6” Under Shelf With Dip Rail On Top Surface Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofpantry Ss 304 Grade Table Size 84”X24”X30” Under Shelf Complete In All Respects. , Supplying Ofonion/Vegitable Slicer Drum Size 15”X24”X34” Capacity Of20 Kg Power Consumption : 1.0 Kilowatt Single Phase Body: Stainless Steel 304 Grade, Capacity (Kg/H) Motor: 1 Hp Sirman/Neo Or Equivalent. , Supplying Ofpotato Peeler Drum Capacity : 20 Kg Power Consumption 1.5 Kilowatts Body:Stainless Steel Size: 15”X24”X34”Capacity(Kg/H)Motor:1Hp Two/Three Phase (Crompton) , Supplying, Installation, Testing And Commissioning Ofcold Room Combo Walk In Freezer/Chiller Of Size 84”X60” Complete In All Respects Blue Star/Voltas/ Or Equivalent(Actual Size/Specification As Per Site) , Supplying, Installation, Testing And Commissioning Ofsalamander- Electric Lift-Up Salamander 220V Voltage:220V Power:4.0Kw Size:24X18” Nw:48Kg Customize , Supplying, Installation, Testing And Commissioning Ofdigital Weighing Scale 600X 600 Mm Pan Maximum 100 Kg Colour Black, Main Body Ms Size 24”X30”X30” Complete In All Respects Satwik/Scale Or Equivalentmake. , Supplying Of Digital Bakery/Kitchen Weighting Scale 0 To 5 Kg Ss Bodycomplete In All Respects Satwik/Scale Make Or Equivalent , Supplying, Installation, Testing And Commissioning Ofro-Standard Ao Smith With Hot And Cold Water Dispenser Ao Smith Z9 Green Ro +Scmt 10 Litre Complete In All Respects Make:- Ao Smith/Voltas/Kent Or Equivalent , Supplying, Installation, Testing And Commissioning Of3 Sink Unit Size 120”X30”X34” Ss 304 Grade With (Drain Board) With Overhead Shelves For Storage. Sink Size 24 Inches , 1St Drain Board Of 1 Feet Then 1St Sink Of 2 Feet Then 2Nd And Third Sink. The Central Hole/Drainage Hole Of Sink Should Be Positioned At 2Feet, 4.5 Feet And 7 Feet Form Left Side Exactly Complete In All Respect. , Supplying, Installation, Testing And Commissioning Of2 Sink Unit Ss 304 Grade With (Drain Board) With Overhead Shelves For Storage. 96”X30x30’’ Sink Size 24 Inches , Separate Drain Board Of 1 Feet Then 1St Sink Of 2 Feet Then 2Nd Sink. The Central Hole/Drainage Hole Of Sink Should Be Positioned At 2 Feet Complete In All Respect. (As Per Site) , Supplying, Installation, Testing And Commissioning Ofinduction Plate, Electrically Operated3000 Volt Stella Or Equivalentmake. , Supplying, Installation, Testing And Commissioning Ofwater Boiler/Steamer, Double Insulated, Water Indicator, 50 Liters Capacity (Customize) , Supplying, Installation, Testing And Commissioning Ofhot/Cold Water Dispenser (Drinking Water) Attached With 20 Litres Jar To Filterblue Star/Electrolux/Ifb Make , Supplying, Installation, Testing And Commissioning Ofsink Ss 304 Grade Of Size 24”X24”X34” With Stand Complete In All Respects. , Supplying, Installation, Testing And Commissioning Ofsink Ss 304 Grade Of Size 44”X24”X34” With Stand And Drain Board Complete In All Respects. , Supplying Of Bread Slicer4 Slot Complete In All Respects For Bakery (Sirman/Manitowoc Or Equivleant Brand) , Supplying, Installation, Testing And Commissioning Jambo Sandwich Griller Commercial Capacity Of 4 Sandwich Tray Sirmon/Electrolux/Inlasa Or Equivalent Make. , Supplying, Installation, Testing And Commissioning Of Water Cooler With 50 Ltrs With Ss 304 Grade Body Blue Star/Voltas/Celforst Or Equivalentmake. , Supplying And Fixing Of Stainless Steel Drain Grating Fabricated With 304 Grade Ss Of Approved Quality & Design Clear Opening 235 Mm, Grate Width 300 Mm, Grate Depth 32 Mm, Bar Spacing 25 Mm & Angle Frame 40X40x 5 Mm And Access Openingto Be Fabricated As Per Lengths Required In Different Size Drains At Site Complete In All Respects As Per Actual Size On Site (Rate To Be Quoted Running Feet) , Exhaust Hood: Fresh Air Inletsupplying, Designing Of Exhaust Hood With Filter Completely Constructed From 20 Swg 304 Ss Sheet With Buffle Type Filter And Should Cover Kitchen Ventilation Equipments I.E. Ducking , Blower, Electrostatic Precipitators Make Up Fresh Air Unit, Grease Filters Which Should Be Energy Efficient, Designed In Compliance With Pollution Control Board And Fire & Safety Standard Specifications, Minimum Noise, Easy Maintenance To Reduce Kitchen Fire Hazard And Smoke & Grease Free Kitchen.1. Single Burner High Pressuresize 24”X24”X18” = 7 Nos. 2. Three Burner High Pressure Size 48”X24”X34”= 3 No.3. Traditional Tandoor Size 36X36X40 = 2 No. 4. Tandoor Standard Medium Size 30X30X40= 1 No. 5. Four Burner Rangecontinental = 1 No. 6. Chinese Burner Range= 1 No. As Per Actual Size On Site (Rate To Be Quoted Running Feet) , Supplying, Installation Testing And Commissioning Ofbar Blendertransparent 2 Liters Capacity Size 19”X10”X9” High Grade Blades 3 Pre-Set Menu Functions Motor Speed: 28000 Rpmkent/ Black And Decker/ Jtc Omini Blend Commercialmake (One Number Silent/Sound Free Cover For Bar Complete In All Respect. , Supplying, Installation Testing And Commissioning Of Ice Crusher Of Size 17”X13”X10”New Professional Electric Ice Crusher Stainless Steelincluding Making The Connectionswith Existing Power Plug Complete In All Respect. , Supplying, Installation Testing And Commissioning Of Double Door Bottle/Glass Chiller 300 Litre Size 28”X30”X66” Glass Door With 4 Shelves Temperature Range 2-8 Degree Celsius Refrigerant Type R134a Gas Voltage 240/50 Uronova/Western/ Electrolux/ Celfroxt Or Equivalentincluding Making The Connectionswith Existing Power Plug Complete In All Respect. , Supplying, Installation Testing And Commissioning Ofplate Warmer For Restaurantsize 18”X30”X36”- Type: Commercial Plate Warmerusage/Application: Commercial, Capacity: 50 Plates,Material: Stainless Steel 304 Grade, Power: 2.0Kwakash/ Continentalmake Including Making The Connections With Existing Power Plug Complete In All Respect. , Supplying, Installation Testing And Commissioning Of Electrical Commercial Hand Blenders, Hand Heldsirman Leo Or Equal Brandincluding Making The Connections With Existing Power Plug Complete In All Respect.(Commercial) , Supplying, Installation Testing And Commissioning Oftea Dispensersize 18”X18”X14”Dimension: 350 X 60 X 995With 2 Tank (Milk And Water) Capacity (Litres):20 Color: Anypower Supply: 200 V - 8% Options: Hot And Cold Both Weight : 16 Kgsmake- Everpure Or It’S Equivalent As Approved By The Committeeincluding Making The Connections With Existing Power Plug Complete In All Respect. , Supplying, Installation Testing And Commissioning Ofjuice Dispenser(Coffee Shop) , Supplying, Installation Testing And Commissioning Ofunder Counter Chillers,200 Litres Size 48”X27”X32” Voltage: 220 V Body Material: Stainless Steel Application: Commercial Power Source: Electricity Making The Connections With Existing Power Plug Complete In All Respect. , Supplying, Installation Testing And Commissioning Ofro At Wall Mounted Water Purifierwith Minimum Wastage With High Flow(Latest Technology)80 Liters Per Hour Ao Smith/Kent/Eureka Forbs Including Making The Connections With Existing Power Plug , Supplying, Installation, Testing And Commissioning Stainless Steel Cold Rooms Racks4 Shelves 36”X18”X66” , Supplying, Installation Testing And Commissioning Of Gas Tandoor Standard Size 30X30x36” 20 To 25 Roti , Supplying, Installation Testing And Commissioningof Bakery Table 36”X24”X32” With Marble Top Under Counter Three Side Cover Double Shelve And Double Door Complete In All Respect , Supplying Installation, Testing And Commission Of Lpg Pipe Line 10+10 Cylinder With All Accessories (1” Ms C-Class Jindal Pipe, Manifold-2 Nos., Ncv Valve-18 Nos., Regulator-100 Psi-2 Nos., Lnt Valve-9 Nos., Nr Valve-40 Nos., Cylinder Flexible Pigtell-40 Nos., Click On Adaptor 40 Nos. Burner Flexible Pigtell-18 Nos., Adjustable Regulator 1 Nos, Pressure Gauge-2) And Pipe Line Testing, Installation And Commissioning Etc. All The Articles Should Be Of Iso Standard. (As Per Site And Rate For Running Feet) , Supplying Of Puplizer Machine 2 Hp 18X14x24” Standard Fabricated Complete In All Respect , Supplying Of Potato Onion Bin 48X24x48” Ss , Supplying Meat Mincer 4 Kg Capacity Sirmon Or Equivalent , Supplying Of Bussing Trolly36x24x40” , Supplying Of Vegetable Cart Storage Trolly Ss Size 20X18x66” , Supplying Of Floor Bin 40 To 60 Kg Capacity For Food Storage Rubbermaid/Vevor/Abs Or Equivalent , Supplying Of Clean Dish Table 48”X24”X32” With 4” Side Up Edgeswith Under Counter Single Shelves With Ss Pipes And Drain Hole , Milk Boiler Designed And Developed Using Latest Technology Support So As To Provide For High Heating Efficiency With Re-Heating System. Further, Its Muti-Layer Heating Insulation As Well As Keep Warm Function Makes ,Milk Boilers Provide For Efficient Performance. ,Stainless Steel 201/304 Housing Support; Plastic/Copper Material Based Water Faucet; Heat-Resistant Handles; Anti-Dry Protection; Automatic Shut-Off Provision Capacity : 15 – 20 Ltrs , Two Door Pizza/Sandwich Table, Preparation Table With 5 Drawer 2010Mm, Fpf 3480 Ss Interior/Exterior With Galvanised Back Panel, Aspra Compressor, Fan Motor, Digital Controller 600Mmx400mm Rack And Trace Insulation Foam, Temp. + 2 – 8 Degree Centigrade, Auto Frost, Smart Thermostate Mega Top
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Himachal Pradesh View Result →
29.
Tourism #10484573 Price Bid
Supplying, Installation Testing And Commissioning Of Kitchen Equipments For Hotel Of Hptdc Chanderbhaga Keylong Lahaul-Spiti ( H.P. ) , Supplying, Installation, Testing And Commissioning Of Ss 304 Graderack Withtable Top / Under Counter Shelf Size 48”X24”X32” With Under Counter Shelvescomplete In All Respects , Supplying, Installation, Testing And Commissioning Of Ss 304 Grade Food Pickup Counter Size 48”X24”X32”+18”+12” With Under Counter Hot Case With Overhead Warmer Shelf And Sliding Door Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Double Glass Door Bottle Chillier 300 To 500 Litre Size 24”X30”X66” Glass Door With 4 Shelves Temperature Range 2-8 Degree Celsius Refrigerant Type R134a Gas Supply Voltage 240 / 50 Complete In All Respects Uronova / Western / Voltas / Blue Star Make / Blue Ice. , Supplying, Installation, Testing And Commissioning Of Pantrytable With Drain Frame Work Ms Of Size 48”X24”X34”+ 18”X12”, Top- Ss 16 Swg Ss 304 Garbage Chute & Over Shelf – 18 Swg Ss 304 Sunk In Top, Overhead Landing Shelf 16 Swg Ss 38 Mm Round Pipe With Adjustable Nylon Bush 32 Mm Ss 16 Swg Round Pipe For Cross Support All Joints Duly Argon Welded, Ground & Buffed Fabricated As Per Specifications Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Sink With Drain Board Ss 304 Grade Of Size 48”X24”X34” With Stand Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Tandoortraditional Tandoor Standard, Medium Size 30X30X34 50 X 50 # 16 Swg Ss 304 Grade Box Type Welded Angle Frame - Ss Angles Reinforced On All Sides And Bottom And Intermediate Position. - Exterior Of Base Reinforced With Inverted Heavy Gauge Ss Channel Frame And Suitable To Fix Castors - Stainless Steel Handle On Each Side - Stainless Steel Insulated Removable Cover With Handle And 400 Mm Dia Cl Ring Place On Top Mouth - 50 Mm Thick Tightly Packed Glasswool On All Sides And Top - 25 Mm Thick Commercial Tandoor Clay Slab Insulation At Base - Provide Slide Up Insulated S / S Shutter With Recessed Handle And Stopper For Ash Removal And Charcoal Filling Complete In All Respects. ( Charcoal & Gas Fuelling ) , Supplying, Installation, Testing And Commissioning Of Ss 304 Grade Cup Board / Under Counter Cupboard Size 48”X24”X32” With 2 Door Under Counter Shelvesand Overhead Shelves Under Counter Hot Case With Warmer Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Ss 304 Grade Work Table / Under Counter Shelf Size 48”X24”X32” Withshelf Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Ss 304 Grade Work Table / Counter Refrigerator Size 36”X24”X34 With Two Door Under Counter Refrigerator Cum Freezer Complete In All Respects. , Two Burner High Pressure Cooking Rang Size 48”X30”X34” Made Of 16 Swg Ss 304 Grade Top With 200X200 Mm Ms Pan Support 12 Mm.M Type Burner 18 Guage Ss 304 Grade Ash Tray Provided Below The Burners.Front Side And Back Panels Of 20 Sws Ss 304 Grade 30X38x3 Mm Boxed Frame Work With Copper Pigtails With Regulator And Pipe Complete In All Respect. , Supplying, Installation, Testing And Commissioning Of Single Burner Stock Pot Stove S.S. 304 Gradesize 24”X24”X24” With Height 24 Inch With Regulator And Pipe Complete In All Respects. , Supplying, Installation, Testing And Commissioning Of Sink Ss 304 Grade Of Size 24”X24”X34” With Stand Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Masala Rack Ss304 Grade Of Size24”X12”X60”Complete In All Respects , Supplying, Installation, Testing And Commissioning Of Ss 304 Grade Storage Rack Size 36”X18”X60” With 4 Racks Complete In All Respects. , Supplying, Installation, Testing And Commissioning Jambo Sandwich Griller Commercial Capacity Of 4 Sandwich Tray Sirmon / Electrolux / Inlasa Or Equivalent Make. , Supplying Of Puplizer Machine 2 Hp 18X14x24” Standard Fabricated Complete In All Respect , Supplying, Installation Testing And Commissioning Ofplate Warmer For Restaurantsize 18”X30”X36”- Type: Commercial Plate Warmerusage / Application: Commercial, Capacity: 50 Plates, Material: Stainless Steel 304 Grade, Power: 2.0Kwakash / Continentalmake Including Making The Connections With Existing Power Plug Complete In All Respect. , Supplying, Installation, Testing And Commissioning Ofgriddle Plate / Dosa Tawa Size 36”X24”X34”, Gas Operated Front Side And Back Panels Of 20 Swg, Ss 304 Grade Boxedplate Type Cast Iron, Seasoned20 Mm Thick Ms Plate Ss Oil Container Of 1Litre Capacity Material Framework Ms Number Of Knob 2Finish Polished Complete In All Respects , Supplying Of Micro Over , Supplying Of Salamander Flexi , Supplying, Installation, Testing And Commissioning Ofwater Boiler Dispenser , Double Insulated, Water Indicator, 25 Liters Capacity ( Customize ) , Supplying And Fixing Of Stainless Steel Drain Grating Fabricated With 304 Grade Ss Of Approved Quality & Design Clear Opening 235 Mm, Grate Width 300 Mm, Grate Depth 32 Mm, Bar Spacing 25 Mm & Angle Frame 40X40x 5 Mm And Access Openingto Be Fabricated As Per Lengths Required In Different Size Drains At Site Complete In All Respects As Per Actual Size On Site ( Rate To Be Quoted Running Feet ) , Exhaust Hood: Supplying, Designing Of Exhaust Hood With Filter Completely Constructed From 20 Swg 304 Ss Sheet With Buffle Type Filter And Should Cover Kitchen Ventilation Equipments I.E. Ducking , Blower, Grease Filters Which Should Be Energy Efficient, Designed In Compliance With Pollution Control Board And Fire & Safety Standard Specifications, Minimum Noise, Easy Maintenance To Reduce Kitchen Fire Hazard And Smoke & Grease Free Kitchen. 5.5 Ft X 3.5 Ft ) Or As Per Actual Size On Site ) , Ducting For Hood As Per Standard Specifications. Rate To Be Quoted Per Running Feet
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Himachal Pradesh View Result →
30.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
31.
Rural Development #10392292 Price Bid
Providing various Type Of Material For Various Work In Fin Year 2024-25 At Vp Jharwad - 2 Vit 3 Wash Sand 4 Sand 5 Murum 6 Dabar 7 Khadi 8 MM 8 Khadi 10 MM 9 Khadi 12 MM 10 Khadi 16 MM 11 Grit Powder 12 Farshi Tandoor Kota 13 Farshi Shahabadi 14 Styles 15 Cement53 Grade 16 Glass Styles 17 Steel 8 MM 18 STEEL 10 MM 19 STEEL 12 MM 20 STEEL 16 MM 21 SQUARE BAR 8,10,12,16 MM 22 VOIDING WIRE 23 SCREW J HOOK 24 FLY ASH VITA 25 CHEMICAL 26 BLOCK 27 GRILL WINDOW 28 CEMENT CHAUKAT 29 Kadapa 30 Chamber 2 X 3 31 Chamber 2 X 2 32 Chamber 3 X 3 33 Chamber 4 Motar Jalpari 39 7.5HP Electric Motar Jalpari 40 12.5HP Electric Motar Jalpari 41 CABLE 3 CORE 42 Triple Layer Water Pipe 43 63 MM PVC PIPE 44 63 MM L BO 45 63 MM T 46 63 MM REDUCER 47 63 MM COUPLING 48 63 MM FTA 49 63 MM MTA 50 63 MM HDPE PIPE 51 75 MM PVC PIPE 52 75 MM L BO 53 75 MM T 54 75 MM REDUCER 55 75 MM COUPLING 56 75 MM FTA 57 75 MM MTA 58 75 MM H.D.P.E PIPE 59 90 MM PVC PIPE 60 90 MM L BO 61 90 MM T 62 90 MM COUPLING 63 90 MM REDUCER 64 90 MM FTA 65 90 MM MTA 66 90 MM HDPE PIPE 67 4 INCH PVC PIPE 68 4 Inch L BO 69 4 Inch T 70 4 Inch Coupling 71 4 Inch Reducer 72 4 Inch FTA 73 4 Inch MTA 74 4 Inch HDPE Pipe 75 1 HP STARTER 76 3 HP STARTER 77 7.5 HP STARTER 78 12.5 HP STARTER 79 1.25 Inch HDPE 80 6 Inch PVC PIPE 81 6 Inch L Bow 82 6 Inch T 83 6 Inch Coupling 84 6 Inch Reducer 85 6 Inch FTA 86 6 Inch MTA 87 6 Inch HDPE Pipe 88 1/2 Inch UPVC Pipe 89 1/2 Inch L Bow UPVC 90 1/2 Inch T UPVC 91 1/2 Inch Coupling UPVC 92 1/2 Inch Reducer UPVC 93 1/2 Inch Cock Tap UPVC 94 1/2 Inch Cock UPVC 95 2 Inch Cock PVC 96 3 Inch Cock PVC 97 NON RETURN VOLVE 98 AIR WAL 99 SWITCH WAL 100 Thibak Bundle 16 MM 101 Joiner 102 Solution 103 Nylon Door 104 1.5 HP Motor 105 Cement Color 25 KG 106 Cement Color 10 KG 107 Cement Color 5 KG 108 Distemper 05 litre109 Distemper 10 litre110 Distemper 20 litre111 Primer Outer112 Primer Inner113 ACROLIC COLOUR114 Emulsion Colour115 APEX COLOR116 DAM PROOF117 CRYAC SIL POWDER118 CRYAC SIL LIQUID119 OIL PAINT120 APEX ROYAL COLOR121 ASIAN PAINTS ACE122 ASIAN PAINTS STAR 123 Terracotta Colour124 Plastic Paints125 Turfane126 Polish Paper127 Roller128 Brush Colour129 Wire Brush130 LED LIGHT 18 VAT131 LED LIGHT 20 VAT132 LED FLOOD LIGHT 36 VAT 133 LED FLOOD LIGHT 50 VAT 134 LED FLOOD LIGHT 100 VAT 135 LED FLOOD LIGHT 150 VAT INCLUDING LAMP WITH PF7 0.95 CLASS IP 65 AND ABOVE 136 FRP BOX SIZE 300 MM 6 A TO 32 A B SERIES 138 SUPPLYING AND ERRECTING STREET LIGHT BRACKET FORERECTION OF DOUBLE FITTING TUBULOR WELDED POLE WITH 40 MM DIA 1.0 M LONG B GRADE GI PIPE ALONG WITH POLE CAP OF 125 MM DIA 600 139 2 CORE CABLE 10 SQ MM ALUMINUM CONDUCTOR WITH CONTINUOS 5.48 SQ MM (12 SWG) 140 SUPPLYING AND ERRECTING COST IORN CABLE INDICATOR PLOT BURIED ALONG WITH ROUTE OF CABLE PVC XLPE ARMAUED CABLE 141 9 MTR HIGHT OCTAGONAL POLE WITH FOUNDATION BOLTS HAVING BOTTOM OF 155 MM A/F TOP 70 MM A/F PROVIDED FOUNDATION 142 GI PIPE 40 MM DIA OR 20 MM DIA GI ROD 143 2 X 4 SQM FR COPPER PVC INSULATED WIRE LAID IN PROVIDED CONDUCT AND TRACKING INSIDE POLE BUS BARS144 GI PIPE A CLASS 40 MM DIA ERECTED FOR ENCLOSING XLPE ARMOR CABLEON WALL POLE 145 1.20 M PIPE 1.5 X 1.5 INCH 150 GI PIPE 3 X 1.5 INCH 151 GI PIPE 3 X 3156 C ANGLE 50 X 5157 C ANGLE 40 X 5158 C ANGLE 65 X 5159 F STRIP 18 X 4160 F STRIP 30 X 5161 F STRIP 20 X 3162 GI SEET COATING163 CHAINLIN FENCING164 EYE BEAM 100 X 50165 C BEAM 75 X 40166 MS PLATE167 6 MMMS BAR168 PIPE MS 2169 PIPE MS 1170 PIPE MS 0.5171 PAVER BLOCK 60 MM172 PAVER BLOCK 80 MM173 Anganwadi Clothes174 Bench175 Handwash Stand 176 Sentizer Stand 177 WashBashing Pot 178 TV 179 E Learning instruments 180 Computer 181 Printer 182 TMT STEEL BAR 183 DUST BIN 184 UNDER GROUND CEMENT PIPE 185 SOUND SYSTEM 186 WATER METER 187 WATER CONNECTION 188 SOLAR PANNER SYSTEM 189 MEDICAL 190 GRAPHITE TANK 191 TRAY CYCLE 192 BIG COMMEN DUST BIN 193 INDIVIDUAL DUSTBEEN 194 PLASTIC COLLECTION UNIT
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
32.
Heavy Industries and Public Enterprises #10298277 Price Bid
Inviting Online Tender for Rates for Spare Parts and Repairing/Servicing of Laptop/Computer/Printer/UPS, Different types of Cable for Computer Hardware, Stationary Items, General Items, Printer Cartridge,Photocopy and Rented Vehicle in Directorate of Industries office, Vindhyachal Bhawan, Bhopal,MP. Computer Hardware Head , Com&Lap - Antivirus 1 Years , Com&Lap - Antivirus 3 Years , Com&Lap - Bios Battery , Com&Lap - C - Port To Hdmi , Com&Lap - C - Port To Lan , Com&Lap - Cabinet - Atx , Com&Lap - Cordless Keyboard , Com&Lap - Cordless Mouse , Com&Lap - Cpu Cooling Fan , Com&Lap - Desktop Computer Ram Ddr21gb , Com&Lap - Desktop Computer Ram Ddr22gb , Com&Lap - Desktop Computer Ram Ddr24gb , Com&Lap - Desktop Computer Ram Ddr32gb , Com&Lap - Desktop Computer Ram Ddr34gb , Com&Lap - Desktop Computer Ram Ddr44gb , Com&Lap - Desktop Harddisk 128 Gb , Com&Lap - Desktop Harddisk 256 Gb , Com&Lap - Desktop Harddisk 512 Gb , Com&Lap - Desktop Harddisk 1Tb , Com&Lap - Desktop Mother Board Board 945 , Com&Lap - Desktop Mother Board I3 , Com&Lap - Desktop Mother Board I5 , Com&Lap - Desktop Mother Board I7 , Com&Lap - Desktop Processor C2d , Com&Lap - Desktop Processor Dual Core , Com&Lap - Desktop Processor I3 , Com&Lap - Desktop Processor I5 , Com&Lap - Dvd Writter For Desktop , Com&Lap - Formating Charges , Com&Lap - Keyboard - Pin , Com&Lap - Keyboard - Usb , Com&Lap - Lan Card (Usb To Lan) , Com&Lap - Laptop Battery , Com&Lap - Laptop Charger , Com&Lap - Laptop Dvd Writter , Com&Lap - Laptop Harddisk 128 Gb , Com&Lap - Laptop Harddisk 256 Gb , Com&Lap - Laptop Harddisk 512 Gb , Com&Lap - Laptop Harddisk 1Tb , Com&Lap - Laptop Keyboard , Com&Lap - Laptop Processor & Board , Com&Lap - Laptop Ram Ddr2 1 Gb , Com&Lap - Laptop Ram Ddr2 2 Gb , Com&Lap - Laptop Ram Ddr2 4 Gb , Com&Lap - Laptop Ram Ddr3 2 Gb , Com&Lap - Laptop Ram Ddr3 4 Gb , Com&Lap - Laptop Ram Ddr4 4 Gb , Com&Lap - Laptop Ram Ddr4 8 Gb , Com&Lap - Laptop Touchpad , Com&Lap - Mouse Pad , Com&Lap - Mouse- Pin , Com&Lap - Mouse - Usb , Com&Lap - Pce Lan Card , Com&Lap - Pendrive 32 Gb , Com&Lap - Pendrive 64 Gb C Type Usb3.0 Otg , Com&Lap - Pendrive 64 Gb , Com&Lap - Smps 450W , Com&Lap - Smps 650W , Com&Lap - Smps Slim 450W , Com&Lap - Ssd 256 Gb Laptop And Desktop , Com&Lap - Ssd 512 Gb Laptop And Desktop , Com&Lap – External Ssd 256 Gb For Laptop And Desktop , Com&Lap – External Ssd 512 Gb For Laptop And Desktop , Com&Lap - External Ssd 1 Tb For Laptop And Desktop , Com&Lap - External Ssd 2 Tb For Laptop And Desktop , Com&Lap - External Ssd 4 Tb For Laptop And Desktop , Com&Lap - Ssd Nvme 256 Gb Laptop And Desktop , Com&Lap - Ssd Nvme 512 Gb Laptop And Desktop , Com&Lap - Ssd Nvme 1 Tb Gb Laptop And Desktop , Com&Lap - Usb Extension 4 Port , Com&Lap - Crt Est , Com&Lap -Crt Memory Ic Chip , Com&Lap - Crt Picture Tube , Com&Lap -Crt Power Supply Unit , Com&Lap -Crt Repairing & Service Charge , Com&Lap - Tft Picture Gum , Com&Lap - Tft Power Supply Unit , Com&Lap -Tft Repairing & Service Charge , Com&Lap - Tft Screen , Com&Lap - Cat6 Cable , Com&Lap - Convertor Hdmi To Vga , Com&Lap - Convertor Vga To Hdmi , Com&Lap - Power Cable For Desktop , Com&Lap - Power Cable For Laptop , Com&Lap - Power Cable For Printer , Com&Lap - Data Cable For Printer , Com&Lap - Vga Cable For Desktop , Com&Lap - Hdmi Cable 1 Mtrs , Com&Lap - Hdmi Cable 3 Mtrs , Com&Lap - Hdmi Cable 5 Mtrs , Com&Lap - Hdmi Cable 10 Mtrs , Com&Lap - Hdmi Cable 15 Mtrs , Com&Lap - Hdmi Cable 30 Mtrs , Com&Lap - Ms Office Home & Student 2021 , Com&Lap - 19 Inch Monitor (Tft) , Com&Lap - 24 Inch Monitor (Led) , Entry Level Printer - Adf Pickup Roller , Entry Level Printer – Drum Uint , Entry Level Printer – Ccdunit , Entry Level Printer - Cap Hinges , Entry Level Printer - Control Pannel , Entry Level Printer - Dc Controller , Entry Level Printer - Drum Blade , Entry Level Printer - Fuser Unit , Entry Level Printer - Fuserdrum Gear , Entry Level Printer - Gear Assembly Unit , Entry Level Printer - Hbps Card , Entry Level Printer - Heat Roller , Entry Level Printer - Logic Card , Entry Level Printer - Lsu Unit , Entry Level Printer - Megnet , Entry Level Printer - Motor , Entry Level Printer - Paper Tray , Entry Level Printer - Pick Roller , Entry Level Printer - Pressor Roller , Entry Level Printer - Repairing & Service Charhes , Entry Level Printer - Scanner Unit , Entry Level Printer - Sensor Unit , Entry Level Printer - Sepration Paid , Entry Level Printer - Smps , Entry Level Printer - Teflon , Mfd Printer - Adf Pickup Roller , Mfd Printer – Drum Unit , Mfd Printer - C.C.D Unit , Mfd Printer - Cap Hinges , Mfd Printer - Control Pannel , Mfd Printer - Dc Controller , Mfd Printer - Drum Blade , Mfd Printer - Fuser Unit , Mfd Printer - Fuserdrum Gear , Mfd Printer - Gear Assembly Unit , Mfd Printer - Hbps Card , Mfd Printer - Heat Roller , Mfd Printer - Logic Card , Mfd Printer - Lsu Unit , Mfd Printer - Megnet , Mfd Printer - Motor , Mfd Printer - Paper Tray , Mfd Printer - Pick Roller , Mfd Printer - Pressor Roller , Mfd Printer - Repairing & Service Charhes , Mfd Printer - Scanner Unit , Mfd Printer - Sensor Unit , Mfd Printer - Sepration Paid , Mfd Printer - Smps , Mfd Printer - Teflon , Ups - Invertor Card , Ups - Battery Charger( Heating Bridge) , Ups - Mospet , Ups - Resistance , Ups - Main Power Transformer , Ups - Repairing & Service Charges Perups 500Va /650Va/ 750Va / 800Va/1000 Va , Ups - Battery - 7 Ah, 12 Volts, Smf , Stationery Items Head , Printing Paper A4 (75 Gsm) , File Cover (Card Board Office File Cover, Paper Size: Fullscape) , File Pad (Cardboard Office File Pads) , All Pin Stanless Steel , Whitener Correction Pen 4 Inch , Pencil Black 6 Inch , Stapler Pin No 10 1M , Stapler Pin No 24/6 1M , Stapler N10 , Size: 4 Inch , Stapler Hp 45, Size: 7 X 3 X 17.5 Centimeters , Stapler Heavy Duty ,Stapling Capacity: 210 Sheets , Stapler Pin 23/10-H , Note Sheet Paper A4 Size , U Shape Paper Pin/Gems Clip , Stamp Pad Blue For Stamping Purpose Size 110Mmx70mm , Stamp Pad Blue For Stamping Purpose Size9.5 Cm X 5 Cm , Envelope White Paper For Letter, Courier And Documents, 90 Gsm,Size - 9 X 4 Inches , Envelope Yellow Inside Laminated11x5 Inch , White Board Marker Pen , Highlighter Pen For Marks Highlight Text-Line , Notes Paper Flags Re-Stick(25Mm X 75Mm) - 4 Colours , Magnetic Pin Cushion 7X4(Hxl)Mm , Stock Book With Amount Column - Hard Bound - Register Size - 32 X 20 Cm (90 Pages - Pack Of 1) , Gum Bottel 300Ml , Gum Bottel 700Ml , File Tag Thread Green 20 X 18 X 1 Centimeters (100 No) , File Tag Thread For Paper Binding - 6 Inch, White (100 No) , Dak-Pad (F/S Or Legal Size: 14.5 X 10 Inch) , Invert/Dispatch Register Etc. (Dispatch - 72Gsm 275 Pages) , Single Line Long Register (100 Pages) , Register 6Qr 16X26 Cm 400 Pages , Register 4Qr 16X26 Cm 200 Pages , Register 8Qr , 80 Gsm , Rubber Eraser For Pencil (Pack Of 10) , Bill Register 65 Gsm Green Ledger Paper, - Dimensions: 19.5 X 32.5 Cm( 4 Qr) , Shorthand Copy 100 Pages , Poker(Tocha) Plastic Handle 8 Inch , Steel Scale 12 Inch , Plastic Scale 12 Inch , Gel Pen 0.55Mm 10Pen Box Pack , Motor Vehicle Log Book - Hard Bound - 20 X 16 Cm , Self Adhesive Transparent Tapes 2.5Inchx65meters , Cello Tape 1 Inch 65M (Transparent) , Self Adhesive Brown Cello Tape - 100 Meters In Length - 48Mm / 2 Width , Glass Paper Weight 51D X 40W X 51H Millimeters , White Correction Fluid 15Ml , Daily Attendance Register, 75 Pages , Desk Table Plastic 15 X 21 Inch Top With Foldable Transparent, Adjustable 7Mm Writing Desk Stand, Z-Type , Desktop Calculator 150 Steps Check And Correct With Tax & Gt Keys & On Display Indication Of Active Constant , Glue Stick 25Gm , Ball Pen 0.7 Mm , Scissors Steel 22.9 X 2 X 1 Cm , Plastic L Folder,Clear Transparent Size Legal, F/S, ( Set Of 10 Pcs ) , Multicolor Plastic Envelope File Folder 13 Inch X 11 Inch , Leather, Foam Convocation File Folder, A4 , Executive Diary (75 Gsm Dual Color), B5 Size, Dated Diary , Pen Stand Compartments Woodenwith Visiting Card & Mobile Holder For Office Table (Min Size 175 Mm, 75 Mm, 100 Mm) , Contigent Register-200 Folio , Paper Cutter 9Mm , Metal Binder Clip Double Clip Size 51 Mm , Pencil Sharpener Steel Blade , Cash Book As Mptc 5, A3 Size, 100 Pages, Min 80 Gsm Paper , Single Line 5 Subject Spiralnotebook (14 X 21.6 Cm) 70 Gsm , Envelope Laminated Yellow Paper Legal Size | Poly Laminated Inside | 10 X 14 Inch , Envelope Laminated Yellow Paper A3 Size | Poly Laminated Inside | 10 X 14 Inch , A4 Size Envelop Laminated Yellow10 X 12 Inch , Letter Head 125 Gsm, White , Colour Flag 3 X 3 , Visiting Card , Cartridge Sheet (140Gsm) , Sketch Pen 12Shade Multicolour , Jute Folder (A4 Size) , Leather Multipurpose File Folder (A4 Size) , General Items Head , Milk Powder For Tea 500 Gram Pack , Packaged Drinking Water 200 Ml , Packaged Drinking Water 500 Ml , Packaged Drinking Water 1 Ltr. , Green Tea - Detox/Desi Kahwa, 25 G (10 Bags X 2.5 G Each) , Honey Lemon Green Tea Bags, 35 G (25 Bags X 1.4 G Each) , Raspberry Indulgence Tea (20 Teabags - Foil) , Biscuit Butter/Cashew/ 50G Pack , Biscuit Tastier Sweet-Salty Crackers 75G Pack , Biscuits High Fibre 100G Pack , Sugar Cube, 500 G Pack , Sugar , Tea Premium With Long Leaves 500G , Coffee Pouch, 1Pcs Instant Coffee (60 X 1.67 G) , Tea Cup Bone China White Color Gold Design 160 Ml , White Tea Cup Set Of 6, , Plate Bone Ash Free Quarter Plate 7.5(6 Pcs) , Serving Tray Platter Rectangular Plastic Tray 35L X 25W X 4H Centimeters , Electric Kettle 1.8L, Stainless Steel Inner Body - Auto Power Cut, Boil Dry Protection & Cool Touch Double Wall, Portable | 1500 Watts, Size- 24L X 20W X 28H Centimeters , Electric Kettle, Stainless Steel Quick Boil, 1 Ltr, 7.9L X 6.3W X 7.9H Centimeters , Transparent Waterglass Set Of 6 Pcs (300 Ml Each) Large Flame Proof Round Shape Glasses , Spoon Stainless Steelset Length 16.6Cm (Medium, Set Of 12) , Tissue Paper 30X27 Cm (100 Sheets Per Pack) , Facial Tissue 2 Ply Soft Pack - 200 Pulls , Dishwash Bar, 125G , Air Freshener 48 G (Pack) , Room Freshener Spray (220 Ml) , Detergent Bar, 110 G , Mosquito Vaporiser Refill + Machine - 45Ml , Liquid Vaporiser Mosquito Repellent Refill 45 Ml , Tea Strainer Chai Chalni Stainless Steel , Thermos, Thermosteel Vacuum Insulated 24 Hours Hot Or Cold Carafe, 1000 Ml , Handwash Refill – Skincare Hand Wash- 1500Ml Pack , Dishwash Liquid , 250 Ml Bottle , Men Raincoat Free Size , Umbrella- 54 Inch Heavy Duty , Pre Ink Stamp Small 1.2Cmx3.6Cm , Pre Ink Stamp Size 2.1Cmx5.7Cm , Cell Carbon Zinc Aa Battery - 10 Pieces , Cell Aaa Batteries - Pack Of 10 , Nameplate Fiber 6 X 12 , Double Side Name Plate , Name Plate Big Size 10 X 12 , Door Bell (Wireless) , Door Locks (Tala) , Plastic Open Dustbin, (8 L) , Plastic Pedal Dustbin , 10 L , 9 Watt Led , 12 Watt Led , Tublite Led (15 Watt) , Electric Cable(3Colour) , Cooler Pad, Khus (4 Feet) , 3 Pintop (5A) , 3 Pintop(15A) , Gi Wire (1Kg) , Moduler Socket (5Amp) , Socket Moduler (5Amp) , Wire 3 Cable Core , Oil 40 No Synthetic , Printer Cartridge (Original) Head , Toner Cartridge Canon 303 , Toner Cartridge Canon F X - 9 , Toner Cartridge Canon 912 , Toner Cartridge Canon 313 , Toner Cartridgeh.P. 12A , Toner Cartridgeh.P. 53A , Toner Cartridge H.P. 36A , Toner Cartridge H.P. 16A , Toner Cartridge Samsung108/104 , Toner Cartridge Samsung 2010 , Toner Cartridge Samsung 4720/1610 , Toner Cartridge Samsung 209 , Toner Cartridgexerox 3117 , Toner Cartridge Samsung 1710 , Toner Cartridge Rexo 1230. D , Toner Cartridge Penasoni 8020 , Toner Cartridge Brother 3060 , Toner Cartridge Epson M-2310 , Toner Rico- 1200 M F , Toner Epson - M 1400 , Toner Canon - 2420 , Toner H P 88-A , Toner Samsung 1043 , Toner Samsung 205 , Toner Canon 328 , Toner Canon 925 , Toner Cartridge Canon 326 , Toner Cartridge Samsung 101 , Toner Cartridge Rico 2501 , Toner Cartridge Toshiba 357 , Toner Cartridge Samsung 116 , Toner Cartridge Samsung Dealer Unit , Toner/ Cartridge Developer Rico , Toner Cartridge Canon 337 , Toner Cartridge Hp Lajer Mfp-136A , Toner Cartridge H.P. 110A , Toner Cartridge H.P. Mfd - 2606Dn , Toner Cartridge Brother- B-700D , Toner Cartridge H.P. Tower- 136A , Toner Cartridge H.P. Mfd- 136 Dn , Photo Copy , Photo Copy On A4 Size Paper (With Min 75 Gsm Paper) , Photo Copy On A3 Size Paper (With Min 75 Gsm Paper) , Colour Printing Work On A4 Size Paper , Spiral Binding A1 , Rented Vehicle , Monthly Charge Of Vehicle For Maximum 1000 Km (Sedan Car Of Max. Rs. 6.50 Lakh Ex Showroom Price) , Variable Charge For Journey Outside Headquarter Or Within Headquarters Beyond Maximum Limit
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 10
Madhya Pradesh View Result →
33.
Science and Technology #10291902 Price Bid
Tender For Civil Renovation Work Of Ccgm Building At Csir-Neeri, Nagpur; 1 Dismantling Gypsum/ aluminium/Wooden partitions , fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge. 3 In cement mortar 4 Dismantling of Indian type Water Closet along with flushing cystern / Europian type Water Closet/Urinals along with flushing cystern / Wash basin / Water Heater with all inlet & outlet puprline / Sintex Over Head Water Tanks at all floor level along with all fixturesof any size including stacking of useful materials in NEERI premisesand disposal of unserviceable materialswith all lead and lift as per direction of Engineer-in-charge: 5 Dismantlingoldplasterorskirtingrakingoutjointsandcleaningthe surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 6 Dismantlingall type of tile work in wall, floors and roofs laid in cement mortar including its base plaster, P.C.C. & stacking material within 50 metres lead. 7 For thickness of tiles 10 mm to 25 mm 8 Dismantling G.I. pipes (external , Internal & concealed)aftertakingoutthepipes,manually/bymechanicalmeans includingstackingofpipeswithin 50metres leadasperdirectionof Engineer-in-charge : 9 15 mm to 40 mm nominal bore 10 Dismantlingdoors,windowsandclerestory windows(steelorwood) shutterincludingchowkhats,architrave,holdfastsetc.completeand stacking within 50 metres lead : 11 Of area 3 sq. metres and below 12 Dismantlingold rain ,waste water C.I. pipesincludingexcavation if required andrefilling , takingoutthepipes,manually /bymechanicalmeansstacking of pipeswithinNEERIpremises with all lead as per the direction of Engineer-in-charge: 13 Up to 150 mm diameter 14 Demolishingcementconcretemanually/bymechanicalmeans including refiling and disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15 1:3:6 or richer mix 16 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 17 Removing dry or oil bound distemper, plastic emulsion, water proofing cement paint and oil paintby scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 18 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONALanti-termitetreatment(excludingthecostof chemical emulsion) : 19 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at45 degree and plugging them with cement mortar 1:2 (1 cement: 2 coarse sand) to the full depth of the hole 20 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 21 Supplying chemical emulsion in sealed containers including delivery as specified for post constructional anti-termite treatment. 22 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 23 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : 24 Cement mortar 1:4 (1 cement : 4 coarse sand) 25 12mm cement plaster of mix: 26 1:4 (1 cement: 4 fine sand) 27 Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing: 28 1:2:4(1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) 29 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.- 30 All kinds of soil 31 Supplying and laying boulder soling (soling stone 125 to 45 mm)and voids filled withmurum below floor and plinth including wateringcompacting and consolidating in layer not more than 150mm thick etc. complete 32 Providingandfixing15-18 mmthickgangsawcutmirrorpolishedand prepolished machine cut of any colourshade and size for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement cement,mixedwithmatchingpigment,epoxytouchups, including rubbing, curing and polishing, edge full moulding on both sideor wherever necessarry as per drawingand instruction of Engineer Incharge etc. complete at all levels. 33 Granite of any colour and shade 34 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matchingpigments etc., complete. 35 Providing and fixing 1st quality ceramic glazedtiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shadecomplete. 36 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer,in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average6 mm thickness, including grouting of joints.( Matt/Antiskid) 37 Vitrified tiles of size 800x800mm 38 Providing and laying Vitrified tiles in different sizes (thickness to bespecified by anufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, Dado over on cement based high polymermodified quick-set tile adhesive (Water based) conforming to IS: 15477 in average 6mm thickness including grouting the joint with white cement & matching pigments etc. complete. 39 Vitrified tiles of size 800x800mm 40 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws . 41 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) 42 Providing&Fixingdecorativehighpressurelaminatedsheetofplain/ woodgrainingloss/matt/suedefinishwithhighdensityprotective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 43 1.0 mm thick. 44 Providing and fixing aluminium work for windows and ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 45 For fixed portion: including Powdercoatedaluminium (minimumthicknessofpowder coating 50 micron) shade as approved by the Engineer in charge. 46 Forshutters: ofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixingoffittingswhereverrequiredincludingthecostof PVC / neoprene gasket required (Fittings shall be paid for separately) including Powdercoatedaluminium(minimumthicknessofpowder coating 50 micron)shade as approved by the Engineer in charge. 47 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced withgalvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware,SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleevefor fixing frame to finished wall as perIS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality and including all fitting and fixtures, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paidseparately. 48 Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 49 Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). 50 Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. 51 Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) & French (False) mullion (55 mm & above) x (60mm & above). (Height upto 2.5 metre). 52 Fixed window / ventilator/ parition with mullion / transom. 53 Using R3 series with frame (55mm& above ) x (45mm& above) & mullion (55mm & above) x (65mm & above). (Height upto 2.5metre) 54 Providing & fixing 65mm thick full ht. Dead partition with 8mm thick cement board (fire resitance paramiter as per BS 476- Part 22 with resistance of 134 min. or Equivalent) to either side of frame of 50 mm x 50 mm x 1mm Aluminium sections at less than 610 mm c/c. Including 65mm thk. Including Wicket gate with all necessary fittings & 15-19 mm thick black granite strip, with half round poilshed edge fixed with necessary adhesive on partition edges as per drawing. The item also includes grouting frame in floor etc. complete.As per drawing. 55 Providing & preparing Laboratory platform 600-800 mm wide out of 16 mm thk. Black granite supported over 12 mm thk. Cement Board including double moulding on the edges, with 25 x 50 mm size Aluminium hollow pipes (TW inserted) for framing etc. complete. 15 mm thk. PVC Panel shutters shall be screwed to Al. framework, via hinges. Intermediates shelves & pull-out working tray operating on telescopic channels shall be out of 15 mm thk. PVC panel. Necessary hardware like S.S. Handles, magnets, locks, etc. shall be considered. All edges shall be finished with 10mm thk.t.w. beadings. All beadings shall have 03 coats of acrylic emulsion paint after relevant coat of wood primer, with finishing etc. complete. (All Hardware-Ebco or equivalent make) 56 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per therchitectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 57 With float glass panes of 5 mm thickness 58 Providing and fixing stainless steel grade 304 mosquito net/wire gauze of average width of aperture 1.2-1.4mm with wire of 26 gauge mm with powder coated suitable aluminimum section (8X18 mm), 1.2mm th. fordoors,windowsin aluminium window etc. complete of make as approved by the Engineer in charge. 59 Providingandfixingaluminium/SSslidingdoorboltsISImarkedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 60 300x16 mm 61 Providingandfixingaluminium/SSslidingdoorboltsISImarkedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 62 125 mm 63 Providingandfixingaluminium/SShangingfloordoorstopperISImarked anodised (anodiccoating not lessthan gradeAC10asperIS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 64 Twin rubber stopper 65 Providing and fixing aluminium/SS tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 66 250x10mm 67 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight 36 kg to 80kg and door width 701mm to 1000mm) (make- Godrej or as approved) with double speed adjustment with necessary accessories and screws etc. complete. 68 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction ofEngineer-in-charge complete. Upto 5mm depth and 5 mm width 69 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 70 Finishing with Deluxe Multi surface paint system for interiors using Primer as per manufacturers specifications including scafolding : 71 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm 72 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 73 Two or more coats on new work 74 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 75 In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works 76 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 77 Providing & Fixing 15mm C.P. brass Concealedstop cockwith protection cap(CON-083FTK of Jaquar) with exposed part kit of concealed stop cock with fitting sleeve, operating lever and adjustable wall flange with seal(CON-083FTK) , washer complete, including cutting & making good the wall wherever required. As per list of approved make or Equivalent or as directed by Engineer Incharge 78 Providing and fixing white vitreous china wall hung wash basin 460x415x200m aprox (Model -CNS-WHT-305 of jaquar) with half pedestal wall Hung basin with fixing accessories andfittings / bracket including 15mmC.P brass Pillarcock auto closing system(Jaquar-PRS-031 or equivalent ), C.P Bottle Trap Casted Heavy(Jaquar-ALD769L 250/300X190 or equivalent),32mm C.P. brass waste coupling(Jaquar-ALD705 80mm height or equivalent)full thread, brass angularstop cock with wall flange(CON-059KN), CP copper connecting pipe 450mm( ALD-805B) includingcutting and making good the walls wherever required etc. Complete as per the instruction of Engineer incharge. 79 Providing and fixing vitreous china rimless wall hung WC with UF soft closing slim seat cover, hinges, accessories set (CNS-WHT-963UFSM) with allfittings &wall hung cistern with 39mm L bend drainage& extension pipe withgasket & O-ring & instalaltion kit ( top cover with ledge(ESH-WHT-184AN of jaquar essco) with installation of complete, brass angularstop cock with wall flange(CON-059KN), CP copper connecting pipe 450mm( ALD-805B) etc complete cutting and making good the walls and floors wherever required as per approved make of Jaquar or approved equivalent make. The approved make like Jaquar/Kohler make. Size 380x515x360mm 80 Providing and fixing 630x445mm Swivel Mirror (AKP-35795 of jaquar) for wash basin rectangular shape for gents and ladies toilet from approved make such as Jaquar/Kolhar/Roca having beveled edge with required fixtures such as bracket and screws etc. complete as per the direction of Engineer-in-charge. 81 Providing and fixing C.P brass Quarter turn two way Bib cockwith wall flange(CON-041KN of jaquar) ofapproved make as per the instruction of Engineer-In-charge. 15 mm nominal bore. 82 Providing and fixing health faucet(jetspray)( ALD 573 of jaquar) of 8mm dia. 1 meter long flexible tube and hook ofapproved make as per the instruction of Engineer-In-charge. 83 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including paintingwith anti corrosive bitumastic paint, cutting chases and making good the wall etc. 84 15 mm nominal outer dia Pipes 85 Providing and fixing G.I. pipes complete with G.I. fittings and clamp including cutting and good the wall etc 86 25 mm nominal outer dia Pipes 87 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 88 25 mm nominal bore 89 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 90 25 mm nominal bore 91 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 92 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 93 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 94 25 to 40 mm nominal bore 95 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 96 For pipes 100 to 250 mm diameter 97 Providing and fixing on wall face/floor with clips unplasticised - PVC (SWR type A,working pressure 4 Kgf per sq cm )pipes conforming toIS: 13592 includingall fittings like Tee, Bend,cleaning type,Y etc.conforming toIS: 14735,scafolding & jointing with sealring/ solvent cement and testing of joints complete, conformingtoIS: 5382 leavinggap for thermal expansionof make Supreme/Kissan classic/Prince as approved by the Engineer in charge. 98 Single socketed pipes 110 mm diameter 99 Single socketed pipes40mm diameter 100 Single socketed pipes 75mm diameter 101 Providing and fixing on floor110x75mm PVC(SWR)Nahani trap conforming toISof makeas approved by the Engineer in charge. 102 Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/ nahani trap. 103 110mm dia 104 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 105 Inside dimensions 600x 850 mm and 45 cm to 60cm deep for pipe line with three or more inlets : 106 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 107 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : 108 Size 600x450x200 mm 109 Bench/wall Mounted 3 Way swan neck Column With Swiveling Spout, Water Flow Around 40i/min At 3 Bars Pressure, Surface Protection:epoxy Powder Coating Ral 7035 Materials:brass / Handle In Pp Head work Sealing. 110 Removing and refixing exisitng false ceiling frame and sheet with necessary fitting and fixtures and framing work without damaging the sheet as instruction ofEnginner incharge etc. complete 111 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 112 In 75x75 mm deep chase 113 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open groove for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawing for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations 114 and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation including the cost of aluminium frame work with minimum 1.2mm thick aluminium sections for ACP cladding. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. 115 Providing and fixing vertical blinds with 100mm Louver width, quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with Acrylic coating resistance to Cracking & Fraying and treated for dust repellency, UV proof , virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom weight - 116.20mmX48.30mm and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete as directed by engineer incharge. 116 Providing and fixing precoated galvanized iron profile sheets(size, shape and pitch of corrugation as5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in approved by Engineer-in-charge) 0.05 mm. 240 mpa mm steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 117 Providingandfixingprecoatedgalvanisedsteelsheetroofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsmasperIS:277in240mpasteelgrade,5-7micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns usingselfdrilling/selftapping screwsorwithpolymer coatedJorL hooks, bolts and nuts andorG.I. seam bolts andnuts,G.I. plainand bitumen washers complete : 118 Gutter .(600 mm over all girth) 119 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 120 Providing JCBincluding driver, helper and fuels chargesfor loading and unloading any type of road material debrises including filling, levelling the ground,cleaning in any area like jungle, broken branches of trees, debrises of institute campus etc. complete as per the direction of Engineer-in-charge. 121 Providing Tipper/ truck includingDriver, helper and Fuels charges for cleaningof debrises/malba, soil, wooden logs, dried trees, shifting construction material, sand, road material and shiftfrom one place to another place in NEERI campus including loading and unloading as per the direction of engineer-in-charge .
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Maharashtra View Result →
34.
Housing Urban and Rular Development #10235078 Price Bid
Tender For New Construction Of Cheriyan Nagar Library Chennai; 1 DISMANTALING WORKS 2 Dismantling etc., all complete 3 Brick / Stone Masonry in lime mortar walls 4 Dismantling RCC by manual / by using deploying machineries 5 Doors and Windows including removal of frames, hinges and fastenings 6 CIVIL WORK 7 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size bouldersand Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum 8 Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 40 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 9 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 10 Supplying and filling in foundation, basement, etc with filling Gravel inwellrammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 11 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 12 Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls.The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and sprayingthe same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers. 13 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages ,placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by theClient / Engineer-in-charge. 14 For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members 15 for plane surfaces such as rectangular or square rcc columns, sunshades, topand bottom slab of rcc boxing, etc. 16 Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members 17 Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. 18 For FoundationandBasement 19 For Ground Floor 20 For First Floor 21 For Second Floor 22 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 23 Supply and constructing Fly ash Brick (230 x 110 x 75mm) masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure usingFly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 24 For Ground Floor 25 For First Floor 26 For Second Floor 27 Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails. 28 Upto 3 M Height 29 3 m to 5.5 m Height 30 5.5 m to 7.5 m Height 31 7.5 m to 10 m Height 32 10 m to 12.5 m Height 33 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 34 Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate includingcost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 35 Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand)according to specifications. Rate shall include for providing GI chicken mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 36 Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 37 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 38 UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work 39 UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chamberedsections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work 40 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 41 Painting the new Iron work with two coats of Ready Mixed Enamel Paint of aproved quality and colour over the existing priming coatincluding the cost all materials etc.,complete, in all floors and as directed by the Departmntal Officers. 42 Providing and fixing Vertical blinds , quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete. 43 Supply and laying with best quality the following materials of Ruby Red, Raw Silk Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 44 Supply and laying with best quality the following materials of Sinthetic Grey, Paradise and similar varieties Granite Slabs Granite Tiles - (Superfine Polished with Machine Cut Edges) of size 2’0” x 1’0” and above 10mm Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 45 Nosing for Granite Slab-Single Nosing 46 Grooving the Granite Slab 47 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Executive Engineer before use on work 48 Paving the floor with design Antiskirt Ceramic tiles (colour and shade as directed) of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement. 49 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 50 Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 of approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Naterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc Rate including all mater aaod and lifts, working materials, labour charges wastages with necessary lead and at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specificatior and as directed by the Client/ Engineer-in Charge 51 Including applying two coats not less than 2 nm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No. 1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 52 Waterproofing: Providing and Applying CFTRI approvedtwo component flexible polymer modified acryliccementitious waterproofing coating with a mix ratio of(5 Liquid :7 Powder) to the RCC surface of the UGT/OHT tankapplied @ 2.2kg/m2 in 2 coats to achieve1.2mm DFT, having Elongation at break >120% asper ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right anglesof wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completelyas per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, >1.5 Mpa as per EN1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applyingtwo component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification 53 Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 54 Supplying And Fixing Rubber Moulded Interlocking Paver Blocks Against Available Edge Restraints 83 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)) 55 Supplying and fabricating of MS structural steel supports for various applications using channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above. 56 Providing Teak wood wrought and put up for frames of doors, windows and ventilators and any other similar joinery works including cost of country wood scantlings and labour charges for manufacturing the frames and fixing hold fasts and fixing in position etc. for all lengths as per architect designs. 57 Best Indian Teak Wood Panelled door in double shutters with frames 100x75mm at side,verticals and top. The shutters shall beof 40mm thick with moulded panels in 20mm thick planks,6Nos.of iron hold fasts fixed in c.c.1:2:4 6Nos.of butt hinges 125mm long including wind appliances, furniture,iron fittings,1No.of iron padlock 15cm long for locking arrangements and fixing inposition,etc.,complete.(ISI STD) 58 Varnishing the new wood work one coat with best shellac and with fine best varnish of approved quality varnish of teak wood natural finish including preparation of surfaces with sand papering in patty priming etc., complete complying with standard specification and as directed by the Departmental officers. 59 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 60 Best Indian Teak Wood panelled door shutter for single leaf door. The shutter shall be 40mm thick with moulded panels in 20mm thick planks inclusive of 3 Nos.butt hinges 125mm long,furniture iron fittings,1No.of jappened hooks and eyes 200mm long and 6mm thick and iron pad lock 15cm long including fixing inposition,etc.,complete 61 FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT -GOBAINGYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at1200mm c/cmax by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying 62 Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works. 63 Supplying and Fixing of English Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 64 Supplying and Fixing of Tamil Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 65 upplying and Fixing ofEmblem (15”) Stainless Steel size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 66 Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges. 67 Supplying and erecting in position LIGHT DUTYSTEEL TRUSSES as per the drawing.The materials and design of the trusses should confirm to the relevant Indian Standard specification.The trusses shall be procured only from reputed manufactures oftrusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design.The rate quoted shall include the cost oftrusses.Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc.,The roof sheeting shall project 0.762m from the eves purlins. 68 Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. 69 Providing, supplying, and fixing factory-manufactured pre-fabricated insulated roofing panels made of PUF (Polyurethane Foam) sandwiched between two metal skins, comprising pre-painted galvanized iron (PPGI) sheets of 0.5 mm thickness on both sides with 40 mm to 50 mm thick CFC-free polyurethane foam core of minimum density 40 kg/m³, having tongue and groove jointing with cam-locking arrangement for weather-tight sealing. Panels shall have minimum overall R-value of 6.5 and thermal conductivity not more than 0.022 W/m·K. Roofing to be supported over structural purlins/trusses using self-drilling screws with EPDM washers, sealants, fasteners, ridge covers, and flashing, complete. Rate includes supply, transport, hoisting, cutting to size, edge finishing, foam taping at joints, sealing, labour, tools, scaffolding, and all incidentals for a fully finished, insulated, and weatherproof roofing system as per manufacturer’s specification and as directed by the Engineer-in-Charge. 70 Brick Wall Cladding Nuvocotto Edge Cut Wall Tiles Natural Red finish in size 230mm x 76mm x 15mm 71 Brick JalliNuvocotto Camp Jallie Natural Red finish in size 200mm x 200mm x 60mm 72 Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT 73 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 74 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 75 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 76 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 77 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 78 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 79 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,. 80 PLUMBING 81 Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, unioncoupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. 82 Supplying and fixing Stainless Steel Health Faucetwith all the accessories etc, 83 Supply and fixing White without PedastalWash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia B Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples,15mm CP Pillar Tap etc (The wash basin should be got approved by Executive Engineer before use on works). 84 Providing and fixing C.P. Angle stop cock of approved quality conformingto IS:8931 :15mm nominal bore 85 Providing and fixing Brass Chromium Plated Towel Rail 60cm long and20mm dia with Brackets etc,. 86 Providing and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm 87 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. 88 75 DIA 89 110 DIA 90 Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. 91 40 DIA 92 Providing, fixing and testing of PVC floor- trap 110 dia with necessory of multitrap connection (heavy duty hinged type) with brass CP frame & cover (100 mm x 75 mm). Trap of 100 mm dia inlet and 75 mm dia outlet fixed on a bed of cement concrete etc.complete. (The frame and grating shall be approved by Architects) 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Concealed On Wall) 94 20MM DIA 95 25MM DIA 96 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 97 25mm dia Cost of gate valve 98 32mm dia Cost of gate valve 99 Providing, installation, testing and commissioning approved make CIY-type Strainer conforming to IS standardwithnecessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. 100 32 mm nominal bore 101 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.(Pipes Runningin the Shaft & below ground level) 102 75 DIA 103 110 DIA 104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Pipes Runningin the Shaft & below ground level) 105 25MM DIA 106 32MM DIA 107 Providinging and fixing in position PVC Vent cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). 108 75MM DIA 109 110MM DIA 110 Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mmthick M.S. plate of size 300 x 300mm plusdia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.(Rate As per Quotation) 111 32 mm dia 112 40 mm dia 113 50 mm dia 114 65 mm dia 115 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:(Rate As per Quotation) 116 Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm ,Heavy duty RCC precast cover (SFRC), benching in CC M-15, internalfaces plastered smooth in CM1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600x600 mm size internal and depth will 450mm to 1200mm & 900x800 mm size internal and depth will 450mm to 1200mm. (Rate As per Quotation) 117 600x600 118 Making of core cutting in RC slab of maximum 150mm thick of following diameter. 119 a) 150 mm dia 120 b) 125 mm dia 121 Providing and fixing MS slotted angle iron brackets, hangers, MS grip bilts,universal clamps with thereaded rod,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water Providing pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls/outer walls etc., The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08 mm thick conformed to IS 1239 etc., complete as directed by the employer. 122 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm) 123 Providinging, installing, fixing, jointing, testing and commissioning of PVC Storm water pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste,The quoted rate shall include necessary earth work, fittings,pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting,refilling, and making good the same complete as required. 124 110 DIA 125 Providing, fixing and testing of Terrace Rain water outlet (110dia) with all the accessories etc,. 126 INTERIOR 127 BOOK SHELF 1 - 2100 x 400 x 2100 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 128 MAGAZINE HOLDER - 600 x 250 x 1200 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 129 DISPLAY UNIT AT RECEPTION - 1200 x 300 x 600 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 130 LEDGE 5000 x600 x 750 Panels are 16mm MR ply with 1mm Matt Finish on both sides with 2mm PVC Edge Band finish mounted to the wall. 131 4SEATERLEARNINGCENTRETABLE-2000mmx1000mmx750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thick 132 6SEATERLEARNINGCENTRETABLE-2400mmx1000mmx 750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thic 133 READING CHAIR - Lounge Chair Uphostered in EPU Leather. Sleek Four Star Fixed Base With Revolving Function In Warm White Powder Coated Finish. Three Dimensional Lumbar Support Design. Model number SCML-SF30.1. Bosses Cabin or equivalent. 134 ROLLINGCHAIRS-Medium back chair with metal grey back frame, metal grey adjustable PU armrest (4D), moulded foam seat with metal grey shell, STG drive-by-wire mechanism with 4 position locking, polished aluminum alloy five-star base with metal grey PU castors. Model number CHT66SW. Bosses Cabin or equivalent. 135 SINGLESTUDYCHAIR:Multi-Purpose Chair Upholstered In Water Based PU Leather. Cushioned Seat and White Ash Solid Wood Legs. Model number SCMF-XCB33 - Latte Brown. Bosses Cabin or equivalent. 136 LOCKER & FOOTWEAR STORAGE- – 1950x375x470mmPLU main 2 DR numeric lock with envelop slot – 1950x375x470mm. Godrej interio or equivalent. 137 RECEPTIONDESK-1800mmx650mmx 1050mm- Reception Table In Matt White and Oak Laminate. IncludesStorage Cabinet and WireManagement Grommet OnDesk. Top Model number 28ROB003(BCRMB-OB 03). Bosses cabin or equivalent. 138 Seamlessly shift from warm, cozy tones to cool, vibrant whites (also known as tunable white or human-centric lighting) is an advanced JS3 Serial LED Connecting System LED lighting technology that allows users to adjust the color temperature of the light output — from warm to cool — to suit mood, time of day, or functional needs.LED Type: OSRAM SMD 3030Iceil™ Supply of OSRAM 24V LED Module Color Temperature: 2700K to 10000K with Iceil IP67 Drivers CRI: ≥90 – Delivers natural, true-to-life color accuracyMounting: High-performance aluminum rigid PCB– Ensures excellent thermal management and long lifespanConfiguration:– Each block features 4 high-quality LEDs– Optimized light spacing for shadow-free illumination– Viewing Angle: PMMA lens Ultra-wide 160° beam spreadDimmable: No Compatibility:DALI, Tuya Smart App, Alexa, & Google Home. Touch Panel, and RF Remote control optionsPower Consumption:– Only 4-6W per sq.ft– Energy-efficient yet high-lumen outputLighting Quality:– Uniform light diffusion across the stretch ceiling– Suitable for both translucent and printed membrane typesIceil™ Power Supply: Wide Input Range 100-305AC (Class I), Surge Protection with 6KV/4KV, Working temp. -20~ +45°C 20% ~ 90%RH, Metal case IP67, Power factor <0.98LED and Power Supply Warranty: 5 Years or 50,000 Hours (whichever comes first)Certifications: CE & RoHS Certified – environmentally safe and globally compliant Installation of pre-supplied LED lighting fixtures, associated drivers, and control systems, including all necessary mounting, wiring, terminations, and system integration by qualified technicians.The scope includes:Installation of LEDs as per lighting layoutMounting and secure placement of LED drivers and control gear in accessible locationsElectrical connections between LEDs, drivers, and controllers using appropriate cablingTesting of each circuit and commissioning of the full lighting setupRate Includes: Skilled labor, tools, basic fasteners, and all on-site installation efforts.. 139 Iceil™ supplies exclusively premium-grade of European Standard PVC Thermo-Stretchable Membrane, complying with BS1-D0 as per EN 13501-1 and Class A as per ASTM E84-2024 fire safety standards. The membrane is precision-cut to the required shape and size, with perimeter edges high-frequency welded with harpoon inserts. Installation is carried out using a durable aluminium profile framing system, ensuring a seamless, secure, and aesthetic ceiling solutionThickness 0.18 mmWeight 250–300 gsm ± 2%Light Transmission Up to 75% (for translucent type)Width Up to 5 meters (seamless); larger areas joined with invisible seamsStretching Method Thermal installation at ~50–60°C using hot air gas blower Fire Rating BS1-D0, as per EN 13501-1, ASTM E84-2024 Class A Explanation: B = Very limited contribution to fire, s1 = Little or No Smoke Production, d0 = No flaming droplets or particles Moisture Resistance 100% Moisture-proofUV Resistance Yes – does not yellow or degrade indoorsEnvironmental ROHS compliant, Phthalate-free, UL Certified - Tri-O-cresyl phosphate < 50mg per kgCertification Manufactured in ISO 9001:2015 certified factoryWarranty 10 Years (under standard indoor conditions) Installation of pre-supplied Stretch Ceiling System, including site preparation, profile fixing, membrane stretching, and finishing using specialized tools and skilled labor.The scope includesFixing of aluminum/PVC perimeter profiles as per approved ceiling layoutHeating and stretching of the pre-cut stretch ceiling membrane on-siteAlignment, tensioning, and seamless fitting of membrane onto the installed profilesIntegration of cutouts for lighting, sprinklers, air conditioning vents, speakers, etc.Final finishing, cleaning, and handover of installed ceiling areaRate Includes: Skilled labor, installation tools, on-site execution, and necessary accessories for completing the installation of the stretch ceiling. 140 The Iceil Wooden Box is built from durable MR/BWP-grade plywood, featuring a 12mm back board, 18mm vertical sides (150mm height), and dual 8mm flexible plywood layers for curved designs. The 150mm depth accommodates lighting and structural needs.Finish Options: White emulsion or PU-coated interior, or white reflective laminate; exterior customizable per client.Mounting: Reinforced corners, cross supports (wood/MS) every 2 ft, fixed with dash fasteners, threaded rods, or MS supports.Stretch Ceiling Compatibility: Suits Iceil’s PVC Harpoon Profile System with aluminium profiles for welded membranes.Lighting Integration: Base for rigid block LEDs with ventilation slots for heat dissipation. 141 Wall paper 142 Carpet Flooring 143 160A LT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, Wall mounted, single front,14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars,internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The Breakerof 160A TPN MCCB and 1set of 160/5A CT with TNEB Metering provision and 1nos of 160/5A CT for APFCR . (Rate as per Quotation) 144 Supply and Erection of electrical panels Boards 145 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type Three Phase Changer Over panel of size (H 2100 X L 2000 X D 300 ) mm with suitable to accommodate 100A 4 pole Three phase Change Over Switch-1No. as incomer for EB Source and as incomer for DG Source, 6nos of 63A 4Pole MCCBs and 4nos of 32A 4Pole MCCBs compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 146 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type 50 kVAR panel of size (H 1800 X L 1800 X D 300 ) mm with suitable to accommodate Incomer 1 Nos 63A 4Pole MCCB, 7nos of 25A 4Pole MCCBs with 7% 1-10 kVAR Capacitor banks in compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 147 VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixingof4way verticalTPMCBsheetsteel Industrial Type TP MCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 4 Nos.of32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections) 148 Supply and fixing of 7 segment8 way63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. withthe following in flush with wall with earth connection only. 149 Supply and fixing of 65 mm dia. (2 -1/2) GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 90W LED Streetlight fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour 150 Supply and Fixing of24W Ceiling Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 151 Supply and Fixing of11W Bulk Head Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 152 Supply of surface-mounted 24W LED wall lights to the ideal solution for a variety of indoor lighting applications. Direct illumination of the wall and surrounding surface, as well as accent lighting for vertical structures. Featuring an aesthetically pleasing, robust construction, these lights are built to withstand all weather conditions, ensuring long-lasting performance and durability • Luminaire body made of extruded aluminium alloy (grade 6063) with die cast aluminium components and non corrosive SS fasteners • Non yellowing UV stabilized translucent polycarbonate diffuser • Luminaire integrated with 24W LED • Die-cast aluminium mounting base for easy installation onto the wall • Surface mounting on wall using hardware after connecting to the power supply • IP : 65, IK : 08 • Cable entries for through-wiring of mains supply cable • Integral constant current power supply • CRI ( Ra) : >80 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply • Available CCT : 2700K, 3000K, 4000K, 5700K. Driver Power Supply : Integral, Input Voltage : 230-240Vac, Frequency : 50-60 Hz, Power Factor : ≥0.95, THD : <10%, Surge Protection : 4KV, Efficiency : >85%, Symmetrical Light Distribution.Product Finish options: Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. CE & BIS Certified. Inhouse NABL accredited lab. Brand Name : Philips, Product SKU : 919215850004 153 Supply of LED Linear Pendant luminaire is a versatile solution for projects that demand high quality of the lighting system and high visual comfort. With its modular design, the Revo-L can be used as an individual fixture or as a combination of luminaires put together in continuous lines • Luminaire made of extruded aluminium for better thermal management • polycarbonate diffuser for optimum optical performance, • Hexa-cell (Matte Black) secondary reflector • Suitable for surface and suspended mounting • Supplied with standard suspension kit (1metre).• Cable entries for through-wiring of mains supply cable • Integral power supply • Suitable for operation on 240V,50Hz single phase ac supply• Driver Power Supply : Integral, Power Factor : >0.90, THD : <10%, Surge Protection : 4KV-6KV, Efficiency : >85%, IP 44 Rating.• Dimension: 1188 x 36 x 75, 2365 x 36 x 75, 3540 x 36 x 75.• Wattage Options : Upto 40W, Upto 80W, Upto 120W.• Mounting: Pendant Mounting, Pendant Mounting, Pendant Mounting, Surface Mounting, Surface Mounting, Surface Mounting • Product Finish options: Pure polyester powder coated, RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 9016 Traffic White • CE & BIS Certified • Inhouse NABL accredited lab. Philips SP170P LED25S-6500 PSU W5L113 OD WH Smartbright Linear 154 Supply of Input power : 8W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire madeof extruded aluminium alloy (grade 6063), die-cast aluminium of high corrosion resistance and non corrosive stainless steel fasteners. Translucent polycarbonate diffuser. Pressure die cast aluminium mounting plate Ø100.5mm x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD55 for surface mounting on floor. The base plate have a cable entry hole of 70 x 24 mm dia at the center. Single cable entrance via PG7 cable gland. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 2.5KV. Luminaire dimension : 106mm diameter x 565mm height. CE & BIS Certified. Foundation Bolt - 2 Nos of M8 Foundation J Bolt Length 150mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each BoltInhouse NABL accredited lab. PHILIPS Bollard BCP100 LED 10W PSU GR L 750mm Solar Light 155 Supply of LED Linear Lighting to suit ceiling / wall is a slim and elegantly designed fixture, suited for varied applications offers a uniform, glareless and soft lighting.Al. Profile Housing Dimension: 1000 x 17 x 8, 2000 x 17 x 8Mounting: Surface Mounting, Product Finish: Anodized Aluminum• Luminaire made of extruded aluminium for better thermal management • PC clear / semi clear matte diffuser for excellent diffused lighting experience throughout the life of the fixture • Designed for mounting on ceiling / wall • Cable entries for through-wiring of mains supply cable • To be used with LED strip & power supply unit of suitable rating. Brand Philips Profile Shine 240 LEDs/m LED Strip | 3000K Warm White | High Brightness Linear Strip for Cove, False Ceiling, Architectural, Ambient Lighting 156 Supply of 24V 2835 Flexible LED Strip, 12W/m, Non-Integral, CCT: 2700K, 4000K, 6500KDimension: 5m / Roll, IP : 67, Brand Name : K-Lite, Code : 7289 or equivalent 157 24V Power supply, IP 67 Rated SMPS suitable for 24V LED Strip lights. Wattage: 150W, 24V Series Waterproof IP67 Power Supply24Vdc 6.25 Amps 150W Power unitDimension: 313 x 43 x 34IP : 67,Brand Name : K-Lite, Code : 8198 or equivalent 158 Supply and fixing of Fans and Air Circulator 159 Supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star rated complete ( Higher end)with 2 module 100W fan step regulator (Higher end)with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 160 Supply and fixing of 600mm wall mounting Air circulator and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 161 Supply and fixing of 300mm(12)sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessaryaccessories and hardwares as required. 162 Supply and fixing oflouvers shutter arrangements for 300mm(12)sweep (Heavy duty) AC Exhaust fan complete 163 Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required. 164 Supply and Laying of 3 1/2 x 50 sq.mm. PVC Al.Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 165 Supply and Laying of 4C x 16 sq.mm. PVC AL. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.Main Panel to DB 166 Supply and Laying of 3C x 2.5 sq.mm. PVC Cu. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodMain Panel / DB to Street Lights 167 Supplying & Laying 120mm/103.5mm HDPE Pipe as per requirements including excavation & refilling. 168 Supply and fixing of double compression brass cable gland for following Aluminium conductorXLPE insulatedarmoured cable of 1100 V grade with earth connection. 169 Supply and fixing of brass cable gland for3 1/2 Cx 50 Sq.mm PVC LTUGAl. Armoured cable with earth connection 170 Supply and fixing of brass cable gland suitable for4C x 16 PVC Al. Armoured LTUG cable with earth connection. 171 Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cableLTUG cablewith earth connection. 172 Supply and providing cable end termination of the following sizePVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable) 173 Supply and providing cable end termination of3 1/2Corex 50Sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. 174 Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. 175 Supply and providing cable end termination of 3C X 2.5 SqmmPVC LTUGCopper cable with necessary copper cable sockets by crimping etc, with electrical connection complete. 176 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (SD-375) 177 Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)Higher End (SD-385) 178 Supply and fixing of 25A Flushtype Wall Socket 25A DPMCB complete set for ACPlug inflush with wall with earth connection (For AC Plug) 179 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed inwall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire and making good of the concealed portion withsuitable colour. ( SD 430 ) 180 Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe onconcealed wall and ceiling with continuous earth wire connection with painting of suitable colour. 181 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp andwithcopper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonrySD-233 182 Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection 183 Supply and Run of 1 of25.6.25 mm Al. Flat on wall / floor / ground for earth connection. 184 Supply and Run of 1 of25.6.25 mm Cu. Flat on wall / floor / ground for earth connection. 185 Supply, Installation, Testing and commissioning of 40 channel NVR with 4TB HDD * 4nos, Up to 40-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback.(Make: Hikvision/Dahua/Panasonic) 186 Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.All including suitable camera stand and accessories. (Make: Dahua/Panasonic) 187 Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Each Cameras, 1/2.8 CMOS,4 MP 2592 x1520 or better , triple stream, Min. Illumination required 0.005 Lux/F2.0 (Color,30IRE), 0 Lux/F2.0 (IR ON), 140dB True WDR, triple stream,3 to 12 mm, F1.4 to 2.8 , MFZ, Backlight Compensation, Highlight Compensation 3DNR, Privacy Mask, Internal/External Smart IR LEDs with up to 50m IR distance, H.265& |MJPEG, Inbuilt Video Analytics: Smart Motion Detection, Intrusion Detection, People Counting, Multiloitering, Face Detection, Line Crossing, Missing Object detection, [Unattended Object Detection. THe camera shall have inbuilt cyber security FIPS Chipset.Audio Stream Full Duplex, 1TB SD card support, IP 67 & IK10, Alarm: 1 In & 1out, PoE, H.265 High Profile and MJPEG, PoE Class . Certifications: ONVIF Profile S,G,T & M compliant, NDAA 889 UL, CE, EN, FCC & RoHS compliant and with all accessories and as per detailed tender specifications. 188 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). 189 Supply and Clamping of CAT 6 armoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylenev. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 190 Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point( Point to Point ) Crimping, Testing and arrangement charges. 191 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 192 Supply and Fixing of Rack with Accessories -Higher end 12 U Rack with LNS unit and fan extra for the above rack. 193 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 194 PA SYSTEMS 195 Supply,installation, testing and commissioning of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - BOSCH) 196 Supply, installaion, testing and commissioning of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH) 197 Supply, installation, testing and commissioning of Goose Mic 198 Supply and installation ofHandheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) (Market rate) 199 Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers. 200 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 201 Supply and erection, testing and commissioning of 2.0 TR (6000K.cal/hr) ABS Split type Air conditioner (3 star rating)confirming to IS : 1391(part-2) 1992 with Admt No.1 fitted withhermetically sealed air compressor operating on refrigerant R-410A suitable for wall mounting for operation on 230V 50 HZsingle phase AC supply inverter technology with capable of thefollowing performinga) Coolingb) Dehumidifyingc) Air circulatingd) Filteringe) Refrigerant pipe lines – 6 mtr lengthThe installation works for the above split type AC units includethe following1. Mounting / fitting indoor and outdoor units at theirrespective locations2. Laying refrigerant pipe line of required length notexceeding 6 meters distance & connecting both units afterdrilling hole/holes in the wall is required, thickness of the coppertubing shall not be less than 0.7 mm3. Installing the section pipe with expanded polythene foamtubing4. Laying drain pipe to throw out the condensate water beingformed within indoor unit5. Leak testing the entire system unit6. Charging refrigerant gas in the unit7. Suitable electrical wiring with to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoorunit upto 6 meter length and upto switch within 3 meters oflocation of indoor unit. (Like (Carrier / Voltas / Blue Star /Equivalent) as directed by the department officers 202 Supply and fixing of 5 KVA slim and wall mounting (V Guardmake ) double booster voltage stabilizer for operation on 170-230V 50Hz single phase AC supply capable for 2 TR split ACwith necessary inter connection and earth connection as directedby the departmental officers. 203 LANDSCAPE 204 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 205 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 206 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 207 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 208 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 209 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 210 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
35.
Public Administrative Department #10227715 Price Bid
annual repair and maintenance of Non Residential Building Under Sd-I, Cd-I, Apwd, Rangat. Sw - Upkeeping And Maintenance Of Inspection Bunglow At Rangat. , Mattress 5 Thick ( Single Bed) (Make Dunlop/Kurlon Or Equivalent) , Bed Sheet(Single) (Make Bombay Dyeing Or Equivalent) , Pillow (Make Bombay Dyeing Or Equivalent) , Pillow Cover (Make Bombay Dyeing Or Equivalent) , Blanket (Make Bombay Dyeing Or Equivalent) , Towel (Large) (Make Bombay Dyeing Or Equivalent) , Hand Towel (75X150cm) (Make Bombay Dyeing Or Equivalent) , Wall Mount Clock, Golden Colour(12) (Make Ajanta Or Equivalent) , Ornate Chair (Make Supreme Or Equivalent) , Cloth Hanger (Stainless Steel) , Door Matt Of Size 45X75 Cm , Bathroom Matt Of Size 40X60cm , Iron Box (Make Bajaj Or Equivalent) , Mixer Grinder( 750 Volt) (Make Bajaj Or Equivalent) , Non- Stick Roti Tawa (Make Future Or Equivalent) , Steel Tea Flask (01 Ltr) (Make Bajaj Or Equivalent) , Steel Tea Flask (0.5 Ltr) (Make Bajaj Or Equivalent) , Induction Stove2000 W (Make Bajaj Or Equivalent) , Servingbowl (600Ml) Made Up Bone China,(Oasis Or Equivalent) , Plain Drinking Glass 350Ml (Make Borosil Or Equivalent) , Pressure Cooker (05 Ltr )(Make Hawkins/Prestige Or Equivalent) , Washing Machine (09 Kg) (Make Lg/Samsung/Whirlpool Or Equivalent) , Gas Stove With Stainless Steel Frame 15X15x9 (Single Big Burner) , Gas Stove With Stainless Steel Frame10x10x8 (Single Small Burner) , Serving Soup Bowl300ml Made Up Bone China, (Oasis Or Equivalent) , Serving Bowl 145Ml Made Up Bone China (Oasis Or Equivalent) For Sweet Serving , Quarter Plate 7.5 Made Up Bone China (Oasis Or Equivalent) , Table Plate 27Cm Made Up Bone China (Oasis Or Equivalent) , Rice Plate 9 Made Up Bone China (Oasis Or Equivalent) , Hot Case(07 Ltr ) Milton Or Equivalent , Hot Case(04 Ltr)Milton Or Equivalent , Fibre Serving Tray(18X12x1.75)Milton Or Equivalent , Fibre Serving Tray(10X6x1.5)Milton Or Equivalent , S.S. Tea Spoon Make Parage , S.S. Table Spoon Makeparage , S.S. Cutlery Set (Comprising 06 Dinner Spoon, 06 Dinner Fork, 06 Teaspoon, 06 Baby Spoon, 01 Stand Etc.) , Jug 1.00 Ltr Milton Or Equivalent , Plastic Round Coaster (Milton Or Equivalent) , Cup & Saucer Set (6 Each Cup & Saucer Per Set) Made Up Bone China, La Opala Or Equivalent , Ash Tray Glass Round Table Top , Branded Stainless Steel Ice Bucket(1.5Ltr) With Lid And Tongs , Napkin Holder Stainless Steel Branded , Leather Finish Rexin Covered Sofa Set Made With Wooden Frame, Pu Foam And Spring Based As Approved By Eic (01 Triple Seater & 02 Single Seater). , Sofa Set Cover (01 Triple Seater & 02 Single Seater) Of Approved Colour , Dining Chair Seat Cushion Cover White Colour , Dining Chair Back Cushion Cover White Colour
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
Andaman And Nicobar Islands View Result →
36.
Defence #10211165 Price Bid
Procurement Of Medical Stores , Tablets / Capsules , Lignocaine Hcl 2% With Adrenaline ( 1:80000 ) Inj Vial Of 30 Ml , Lignocaine Hcl Inj 2% Solution With Adrenaline ( 1:80000 ) In 2 Mlcartridge , Lignocaine Hcl Jelly 2% Tube Of 30 Gm With Plastic Nozzle , Alcohol Based Antimicrobial Hand Gel Containing Ethyl Alcohol 60-70% / Propanol 60-70% With An Emollient / Humectant / Moisturiser , Paracetamol 650 Mg Tab , Aceclofenac 100 Mg, Paracetamol 500 Mg Tab , Paracetamol 325 Mg + Diclofenac Sodium 50 Mg Tab , Diclofenac Sodium Sr 100 Mg Tab , Aspirin ( Soluble ) Tab , Common Cold Tab ( Antihistiminics + Paracetamol 500 Mg Without Pseudoephedrine ) , Diclofenac Sodium Tab 50 Mg, Enteric Coated , Diclofenac 25Mg / Ml Ip, 3 Ml Inj , Ibuprofen Tab 200 Mg , Ibuprofen Syrup 100Mg / 5Ml Bott Of 50 Ml , Ibuprofen Tab 400 Mg , Paracetamol 500Mg Tab , Paracetamol 150Mg / Ml, 2Ml Inj , Paracetamol Syp 125Mg / 5Ml , Paracetamol 500 Mg And Ibuprofen 400Mg Tab , Tramadol 50 Mg , Inj Tramadol 50 Mg / Ml , Cetrizine-Dihydrochloride Tab 10 Mg , Levo-Cetrizine 5Mg Tab , Cyproheptadine Tab 4 Mg , Fexofenadine 30 Mg / Ml In 60 Ml Bottle, Syr , Montelukast 10 Mg + Levocetrizine 5 Mg ( Combination ) , Tab , Hydrocortisone Sodium Succininate Inj , Pheniramine Maleate Inj 22.75 Mg Per Ml Amp Of 2 Ml , Pheniramine Maleate Tab Of 25 Mg , Pregabalin 75 Mg Cap / Tab , Pentoxyphyllin 400 Mg Tab , Albendazole Tab 400 Mg , Albendazole Syp Each 5 Ml Containing 200 Mg Bott Of 10 Ml Syp , Amoxycilin Ip 500 Mg Cap , Metronidazole Ip 200 Mg Tab , Ciprofloxacin 250 Mg + Tinidazole 300 Mg Tab , Ciprofloxacin500 Mg + Tinidazole 600Mg Tab , Clotrimazole Mouth Paint Bottle Of 15 Ml , Flucanozole 50 Mg Cap , Flucanozole 150 Mg , Tinidazole Ip 300 Mg Tab , Itraconazole Cap , Secnidazole Tab 500 Mg , Tinidazole Tab , Silver Sulphadiazine 1% Ointment 20 Gm , Fentanyl 25 Mcg , Fentanyl 50 Mcg , Ondansetron Inj 8Mg Amp , Ondansetron 8 Mg Tab , Tab Methylcobalamine 1500 Mg , Folic Acid Tab 5 Mg , Heamatinic Tab / Cap Containing Ferrcus Furrarate Vit B-12 , Heparin, Low Mol Weight Vial Of 10 Ml ( 10000 Iu / Ml ) , Heparin Low Molecular Weight Mol Wt ( 2000-8000 ) In 0.2 / 0.3 M L Prefilled Syringes Of 2500 To 3500 Iu , Tranexamic Acid Inj 500 Mg / 5Ml , Tranexamic Acid Tab , Mannitol 20%, 100 Ml Bottle , Atorvastatin Tab 20 Mg , Isosorbide Dinitrate Tab 10 Mg , Isosorbide-5 Mononitrate Tab 20 Mg , Apixaban 5 Mg Tab , Atorvastatin 10 Mg Tab , Rosuvastatin 5 Mg Tab , Atenolol Tab 25 Mg , Metoprolol Inj 1 Mg / Ml Amp Of 5 Ml , Nifedipine Retard 20 Mg Cap / Tab , Propranolol Tab 40 Mg , Ramipirill Tab 2.5 Mg , Digoxin Tab 0.25 Mg , Asprin Tab 75 Mg , Clopidogrel Tab 75 Mg , Aspirin 150 Mg Tab , Amolodipoine Besylate Tab 5 Mg , Tab Metoprolol Xl 50 Mg , Telmisartan 40 Mg Tab , Losartan Tab 25 Mg , Losartan Tab 50 Mg , Prazosin Xl ( Gits ) Tab 5Mg , Ramipiril Tab5 Mg , Ramipiril Tab 10 Mg , Tab Enalapril 5 Mg , Telmisartan 40 Mg + Hydrochlorthiazide 12.5 Mg, Tab , Clobetasol Propionate Cream 0.5% 10 Gm , Clotrimazole Mouth Paint 1% Bottle Of 15 Ml , Clotrimazole Cream 1% Tube Of 15 Gm , Clotrimazole Pulv 1% Bott Of 75 Mg , Fexofenadine 180 Mg , Framycetin Sulphate Cream Bp 1% Cream 100 Gms , Framycetin Sulphate Cream Bp 1% Cream 15 Gms , Glycerin , Ketoconazole Lotion 2% Bott Of 75Ml , Mometasone 0.1% Tube Of 10 Gm , Mupirocin 2% Oint Tube Of 5 Gm , Povidone Iodine 10 % Ointment , Silver Sulphadiazine 1% Cream W / V Jar Of 500 Gms , Povidone Iodine 7.5% Solution 100 Ml , Sodium Hypochloride 5% , 2-Propanol 45Gm, 1-Propanol 30 Gm Ethyl Hexadecyl Dimethyl Ammoniun , Bott Of 500 Ml , Chloroxylenol Solution , Povidone Iodine Solution 5% Bottle Of 100 Ml , Acetazolamide Tab , Frusemide Inj 20 Mg In Amp Of 2 Ml , Antispasmodic Tab Containing Mefanamic Acid 250 Mg + Dicyclomine Hcl 10 Mg , Cap Probiotic , Antacid ( Chewable ) Tab Each Containing Dried Aluminium Hydroxide Ip 250Mg Mag Hydroxide Nf 250Mg Methyl Polysiloxane 50Mg , Antacid Gel Each 5Ml Containing Dried Aluminium Hyroxide Gel Ip 250Mg, Magn Esium Hydroxide Nf 250Mg And Methyl Polysiloxane 50Mg ( As Per Nfi Bott Of 400 Ml ) , Omeprazole 20 Mg , Pantoprazole Tab , Pantoprazole Inj , Ranitidine 150 Mg , Ranitidine Hcl Inj 50 Mg Per 2 Ml Amp , Omeperazole 20 Mg, Domperidone 10 Mg Cap , Domperidone 10 Mg Tab , Metoclopramide 10 Mg Tab , Metoclopramide Hcl ( 5Mg / Ml ) Inj Of 2Ml , Metoclopramide Syrup 5Mg / 5Ml Bott Of 30 Ml , Dicyclomine Hcl Ip 20 Mg + Pracetamol Ip 500 Mg Tab , Ranitidine Hcl Ip 300 Mg Tab , Anti Haemarhoidal Ointment Containing Hydrocortisone Acetate 5.58Mg, Framycetin 10Mg Heparin 100Iu, Esculoside 10Mg Ethyleaminobenzoate 10Mg, Butyleaminobenzoate 10Mg Per Gm Tube Of 10 Gm , Anti Haemarhoidal Ointment Containing , Dicyclomine Hcl Inj , Antispasmodic Cap Containing Dicyclomine Hcl 10Mg, Dextroprop Oxyphen Hcl 65Mg Acetaminophen Ip 400Mg , Hyoscine Bromide Inj 20 Mg / Ml, 1Ml Inj , Norflox 400 Mg + Tinidazole 600Mg Tab , Oral Rehydration Power Sachet Of 20.5G Each Containing Sodium Chloride Ip 2.6G Any Hydrous Dextrose Ip 13.5G, Potassium Chloride Ip 1.5G & Sodium Citrate Ip 2.99 To Make The Mixture , Thyroxine 50 Mcg Tab , Tab Metformin Sr 1 Gm , Metformin 1000 Mg + Vildagliptin 50 Mg Tab , Glimepiride Tab 1Mg , Metformin 0.5G Tab , Thyroxine Sodium 0.025Mg Tab , Thyroxine Sodium 0.1Mg Tab , Ciprofloxacin 0.3%Eye Drops Of 3Mg / Ml Vial Of 5 Ml , Ciprofloxacin Hcl 0.3% + Dexamethasone 0.1 % Bott Of 5Ml , Sodium Chloride Eye Drops 5%, 5 Ml Bott , Betahistine Dihydro Chloride 8Mg , Xylometazoline Hcl 0.05% W / V Nasal Solution Bott Of 10Ml , Nasal Spray Xylometazoline 0.14% / 0.14Ml Preservative Free , Cefixime Syp 50Mg / 5Ml Bott Of 30 Ml , Cetrizine Syp 5Mg / 5Ml Bott Of 60 Ml , Syp Domperidone , Syp Dicyclomine , Syp Azithromycin 200Mg / 15 Ml , Linctus Cough Paediatric Bottle Of 500 Ml , Metronidazole Susp 200 Mg / 5Ml Bott Of 60 Ml , Norflox Syp 100Mg / 5Ml Bott Of 30 Ml , Ondansetron Syp 2 Mg / 5Ml In Bott Of 30 Ml , Iron Drops Paediatric ( Up To 20 Mg Elemental Iron ) With Lysine, B12 Folic Acid-Bottle Of 15 Ml , Roxythromycin 50Mg / 5Ml Syp In Bott Of 30 Ml , Alprazollam Tab Of 0.25 Mg , Cough Expectorant Syp 5 Ml Containing Diphenhydramine Hcl 14 Mg Ammonium Chloride 0.135 Gm, Sodium Citrate 57 Mg Menthol 0.9 Mg In Flavoured Syp Base Bott Of 110 Ml , Bromhexine Syp 5 Ml Containing 4 Mg Of Bromhexine Hcl Bottle Of 120Ml , Dextrose Monohydrate For Oral Use , Dextrose Inj 50% In Amp Of 25 Ml , Dextrose Inj 25% In Amp Of 25 Ml , Potassium Chloride 15% Inj ( Iv ) Amp Of 10 Ml ( 1.5Gm ) , Sodium Bicarbonate 7.5% Inj Amp Of 10 Ml , Sterile Water For Inj Amp Of 10 Ml , Antimicrobial Hand Gel Containing Ethyl Alcohol 60% + Cyclomethicone C12-15 Alkyl Lactate + Cetyl Lactate + Phenoxyethanol + Stearyl Alcohal With Moisturizer , Anti Phlebitis Cream Tube Of 15G / 20G , Ascorbic Acid 500 Mg , Calcium Carbonate 500 Mg, Vit D3 500Iu Tab , Vitamin B Complex Therapeutic Tab / Cap With A Minimum Concentration Of Vit B1-5Mg, Vit B6-3Mg & Vit B12-5Mcg , Calcium Carbonate Tab 1.5G , Multi Vit Inj Iv Infusion Amp Of 10 Ml , Multivitamin Drops Therapeutic Bott Of 15 Ml , Vit D-3, 60, 00 U Per 1 Gm Sachet , Vitamin E Cap 200 Mg , Budesonide Respules , Monteleukst Tab 5 Mg , Ofloxacin Tab 400 Mg , Diclofenac Gel , Fexofenadine Hydrochloride Tab 120 Mg , Glucosaimine Tab 500 Mg , Ibuprofen Gel , Amoxycillin+Clavulnic Acid Tab 625Mg , Amoxycillin+ Calvalanic Acid Tab 1000 Mg , Amoxiycillin+ Clavulalanic Acid Syp In 30 Ml Bott , Amoxycillin+ Clavulanic Acid Inj 1.2 Gm , Amoxycillin Cap 250 Mg , Amoxycillin For Oral Susp Containing Amoxycillin Base 125Mg Per 5 Ml After Reconstitution ( Bottle Of 30 Ml ) , Amikacin Sulphate Inj 250Mg / Ml Vial Of 2 Ml , Azithromycin Dihydrate 250 Mg Tabcap , Cefotaxime Sodium Inj 1Gm Vial , Ceftazidime Inj 1Gm , Ceftriaxone Inj 1Gm , Cefuroxime Tab 250 Mg Tab , Cefuroxime Susp 125Mg / 5Ml Bott Of 30 Ml , Ciprofloxacin Inj 200 Mg / 100Ml , Ciprofloxacin Tab 250 Mg , Clarithromycin Tab 250 Mg , Cefixime 100Mg Tab , Doxycycline Cap 100Mg , Gentamycin Sulphate Inj Im / Iv40mg / Ml Vial Of 2 Ml , Levofloxacin Inj 500 Mg , Levofloxacin Tab 500 Mg , Metronidazole Inj For Iv Use. Each Ml Containing Metronidazole Ip 500Mg Per Bott Of 100 Ml , Norfloxacin Tab 400Mg , Acyclovir Tab 800 Mg , Injectable Typhoid Vaccine , Cell Culture Rabies Vaccine Vial Of 1 Ml , Tetanus Toxoid, Purified Absorbed Rubber Capped, Vial Of 5 Ml ( 10 Doses ) , Disposable Gown , Disposable Shoe Cover , Laryngoscope Cell 1.5 Vdia13 Mm And Length 51 Mm For , Hand Gloves, Size 7 Pair Of , Hand Gloves, Size 7 1 / 2 Pair Of , Knife Bard Parker, Blade Size 1 Fitting ( Commercial No.10 ) Packet Of 6 , Knife Bard Parker, Blade Size 1 Fitting ( Commercial No. 15 ) Packet Of 6 , Knife Bard Parker, Blade Size 2 Fitting ( Commercial No. 23 ) Packet Of 6 , Syringe Disposable, Plastic, Sterile, 2 Ml With Needle , Syringe Disposable, Plastic, Sterile, 5 Ml With Needle , Adhesive Plaster Zinc Oxide 2.5 Cm X 1 Mtr , Adhesive Plaster Zinc Oxide 7.5 Cm X 5 Mtr , Adhesive Plaster Micro Porous Tape 1 Inch Box Of 12 , Adhesive Plaster Micro Porous Tape 2 Inches Box Of 6 , Bandage Crepe: 10 Cm , Bandage Crepe:15 Cm , Bandage Elastic Adhesive, 6 Cm X 3 Metres Unstretched And 5-6 Metres When Stretched. , Bandage, Open Woven Compressed 2.5 Cm X 4 Metres , Bandage Open Wove Uncompressed: 6 Cm X 4 Metres , Bandage Open Wove Uncompressed 10 Cm X 4 Metres , Bandage Triangular , Bandage `T` Shaped , Cotton Wool, Absorbentpkt Of 50 Gm , Cotton Wool, Absorbent Pkt Of 500 Gm , Dressing, Shell, Compressed , Gauze Absorbent, Folded : 2.5 Cm X 100 Metres , Gauze Surgical, Open Wove, Unmedicated : 60 Cm X 3 Metres Packet , Pad Abdominal Swab 25 X 25 Cm With Tape 30 Cm , Pad Abdominal Swab 40 X 25 Cm With Tape, 30 Cm , Surgeons Mask Disposable , Silk Braided Size 3 / 0, 70-76 Cm Rb 1 / 2 Circle Needle 12-16Mm , Silk Braided Size 3 / 0, 70-76 Cm Rb 1 / 2 Circle Needle 12-16Mm , Developerx-Ray Films Fast To Make 9 Ltr Of Solution , Film X-Ray 43.18Cm X 35.56 Cm ( 17 X 14 ) High Speed. , Film X-Ray38.1Cm X 30.5Cm ( 15 X 12 ) High Speed , Film Dental Single X-Ray 3.2Cm X 4.1Cm ( 1 1 / 4 X 1 5 / 8 ) , Salt, Acid Fixingwith Hardner , Ultrasound Jelly Tube Of 250 Gm. , Liquid Developer For Automatic Processor With Starter , Liquid Fixer For Automatic Processor , Comfort Back Support , Elastic Knee Support , Personal Protection Kit ( Ppe ) , N 95 Mask , Sodium Chloride Solution Isotonic In Nontoxic Disposable Plastic Bottle Of 500Ml Ffs Or Equivalent Technology , Sodium Lactate Compound Solution ( Ringer Lactate Solution ) In Nontoxic Disposable Plastic Bottle Of 500Ml Ffs Or Equivalent Technology , Rabiprazole 20 Mg Cap , Telmisartan 20 Mg Tab , Azithromycin 500 Mg Tab , Vitmin B-Compelx With Zinc Cap , Nefidipine 60 Mg Tab , Itraconazole 200 Mg Tab , Trypsin-Chymotrypsin Tab , Probiotic Sachet , Diclofenac Spray , Mouth Ulcer Gel , Calamine Lotion, Bott Of 10 Ml , Oxygen Mask Disposable Adult Size , Nebulizer Mask Adult Size , Band Aid , Normal Saline, Bott Of 100 Ml , Knee Cap Size- Medium , Knee Cap Size-Large , Lumber Belt ( S, M, L ) , Anticarious Fluoride Rinse Solution 1.0Mg Fluoride Ion M / 10 Phosphate Sol At Ph4 , Gel For Root Canal Preparation Containing Water Soluble Lubricant Edtain Syringe+Stopper+Tips , Benzocaine Oral Ointment Tube Of 20 / 25 Gm , Sodium Fluoride Bottle Of 13 Ml , Post Extraction Dressing Containing Iodoform 15.8G Butylparaminobenzoate 25.7G Eugenol 13.7G Penghawar 3.5G Excipient Ad 100G , Pulp Devitaliser Non Arsenic Containing Paraformaidehyde 46% Lidocaine Base 37% Phenol 6% , Abrasive Mounted Diamond Fg 801 / 018 Round , Abrasive Mounted Diamond Fg 807 Inverted Cone 807 / 016 , Abrasive, Mounted, Diamond Fg 835 Cylindrical 835 / 012 , Abrasive, Mounted, Diamond Fg 837 Cylindrical 837 / 014 , Antiseptic Pain Relieving Gel , Bur Flat Fissure Cross Cut Tungsten Carbide For Straighthand Piece Size-6 , Bur Round Cross Cut Tungsten Carbide For Straight Hand Piece Size 4 , Clothglasspolishing ( Bleached Calico Cotton White ) 1X1 1 / 2 Metres , Lubricant Spray Bott Of 300 Ml , Mirror Mouth Plain Glass Fig 5 Top For , Napkin Dental 15Cm X 15Cmbox Of 500 , Plaster Calestone , Tips Saliva Ejector Disposable , Wax Model Cement Box Of 10 Sticks ( Sticky Wax ) , Wax Modelling ( Base Plate Wax ) Box Of 226.85 Gm , Wire Ss Round Hard 1.0Mm Coil Of 28.35 Gm , Abrasive White Acrylic Fig. W 3 For Straight Hand Piece , Abrasive, White Acrylic Fig W-1 For Straight Hand Piece , Base, Acrylic Resin Powder Pink Shade , Base, Acrylic Resin Powder, Clear Shade , Brush Lathe 7.6Cm Rows Stiff Converging , Brush Lathe 7.6Cm, 4 Rows Soft Straight , Cone, Felt, Pointed, Small, No 67 , Cone Felt, Rounded Small No. 68 , Cold Mould Seal , Mandrel And Polishing, Tip Holders Set Of 3, Cylinderical Tapering And Screw Head. , Plaster Of Paris Special Dental , Rapid Repair Material Liquid Bottle Of 14.2 Ml , Rapid Repair Material Powder Pink Shade Bottle Of 28.4Gm , Rapid Repair Material Powder Clear Shade, Bottle Of 28.4Gm , Teeth Acrylic Cross Linked Set Of 28 Complete ( Comprising One Set Each Of Upper And Lower Anterior Teeth And One Set Each Of Upper And Lowerposterior Teeth ) , Teeth Anterior Acrylic Cross Linked Lower Set Of 6 , Teeth Anterior Acrylic Cross Linked Upper Set Of 6 , Teeth Posterior Cross Linked, Acrylic Set Of 16 Upper And Lower. , Wheel Wool Polishing Size 58 Large , Bur Surgical Oral Round Tungsten Carbide, For Straight Hand Piece , Bur Surgical Oral Tapered Fissure Tungsten Carbide, For Straight Hand Piece , Spray Anaesthetic Surface , Syringe Hypodermic Cartridge Type Needle 22Mm Long Presterlised Disposable Pkt Of 100 For , Syringe Hypodermic Cartridge Type Needle 35 Mm Long Presterlised Disposable Pkt Of 100 , Prophylaxis Paste Jarof 340 Gm , Polishing Cup Rubber, Mounted Soft For Rahp Pkt Of 12 , Wire Ligature Stainless Steel Bsw Gauge 28, Coil Of 15.24 Metres , Base, Plate, Lower Box Of 12 , Base, Plate, Upper, Box Of 12 , Bur Cylinderical, Fg Diamond For Crown And Bridge No 850 / 016 , Bur, Tapering Fg Diamond For Crown And Bridge No 847 / 012 , Composition, Impression 15, Tin Of 225 Gms , Paste Impression Pkt Of Two Tubes ( One White And One Red ) , Crown Preparation Kit Shofu , Tray Impression Perforated Metal Upper Form A Size 1 , Alloy Fine Grain Bott Of 30 Gms ( Silver 68%, Tin 26.8%, Copper 4.4% Zinc In Traces ) , Broach, Nerve Canal Barbed Assorted Size Pkt Of 12 , Cement, Kalsogen, Powder, Bottle Of 20Gm , Cement, Kalsogen, Liquid, Bottle Of 10Ml , Dental Restorative Kit Photo Cure Complete Consisting Of 4 Hybrid Composite Syringes Of Different Shades ( 4.5 Gm Each ) 1 Bottleadhesive For Dental / Enamel ( 6 Ml ) , 1 Bottletooth Conditioner ( 6Ml ) Mixing Pads Spatula Catridgescomplete With Shade Guide , Gutta Percha Points, Germicidal, Assorted, Box Of 150 , 4%, 6% Gp Points ( Grater Taper Gp ) -Pack Of 120 , Hand And Rotary Niti Multitapered Cleaning And Shaping System Starter Pack ( Protper ) -Pack Of 6 , Lining Cavitycomposite Cal Hyd Based Photocure , Material Temporary Filling, Intermediate Restorative Eugenol Free , Material Plastic Glass Ionomer Photo Cure For Filling , Material Restorative Glass Ionomer Type Ii For Filling , Medicaments Root Canal Pulperyl , Medicaments Root Canal Chelating-1 , Medicaments Root Canal Formocresol-1 , Medicaments Root Sod-Hypo 2% , Outfit, Matrix Retainer Ss Complete With One Packet Of Ss Bands , Outfit Matrix Retainerss Band For Pkt Of 12 ( Medium With Thin Gauze ) , Outfit Matrix Ss ( Siqveland ) Bands Narrow For Packet Of 12 , Root Canal Paste For Fillingendomethasone / Endofloss , Self Etching Bonding System-Universal Use ( Xeno Iii Refill Pack ) -Bottle A-4.5Ml & Bottle B-4.5Ml , Strip Ash Melinex Polyster Film 0.95Cm X 10Cm Box Of 100 , Hand Niti Taperde Files 21 Mm Length With Corresponding Gutta Percha And Paper Points-Complete Kit , Hand Niti Taperde Files 25 Mm Length With Corresponding Gutta Percha And Paper Points-Complete Kit , K Files Stainless Steel Size No 8 Length 25 Mm Set Of 06 , K Files Stainless Steel Size No 10 Length 25 Mm Set Of 06 , K Files Stainless Steel Length 25 Mm Size No 15-40 , K Files Stainless Steel Length 25 Mm Size No 45-80 Set Of 06 , H Files Stainless Steel Size No 15-40 Length 25 Mm Set Of 06 , H Files Stainless Steel Size No 45-80 Length 25 Mm Set Of 06 , Gp Solvent Bott Of 10 Ml , Caries Detection Dye Box Of Two Bott Of 06 Ml Each , Borded Broach Set Of 10-12 , Composite Finishing And Polishing Kit , Pad, Cotton Wool, Dental, Box Of 100 , Rolls, Absorbent Cotton Dental Assorted Sizes In Box Of 500 , Surgeons Caps And Masks , Vaccum Blood Collection Tubes With Needles : Edta 2Ml / 3Ml , Vaccum Blood Collection Tubes With Needles : Sterile Tube With Gel - 2Ml / 5Ml , Vaccum Blood Collection Tubes With Needles : Sodium Citrate - 3Ml , Vaccum Blood Collection Tubes With Needles : Sodium Fluoride 2Ml / 3Ml , Kit For Estimation Of Hdl Cholesterol , Kits For Estimation Of Cholestrol , Kits For Estimation Of Glucose , Kits For Estimation Of Urea , Kits For Estimation Of Uric Acid , Kits For Estimation Of Creatinine , Sodium Hypochlorite Solution 10% , Strips Albumin And Glucose Bottle Of 100 Strips , Kit For Triglyceride Estimation ( 100 Ml ) , Kit For Ldl Cholesterol By Direct Estimation , Kit For Estimation Of Bilirubin , Cell Cleaner, Bott Of 50 Ml , Cell Pack, Pack Of 20 Ltr , Stromatolizer Bott Of 500 Ml , Malaria Rapid Test Kit , Dengue Kit , Printer Paper Roll For Sysmex , Trop-T Test Kit => Limited
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Uttar Pradesh View Result →
37.
Housing Urban and Rular Development #10204751 Price Bid
Tender For Lake Front Development At Porur Chennai.; 1 CIVIL WORKS 2 Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. 3 Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. 4 Clearing Scrub Jungle, etc., complete complying with standard specification and as directed by the departmental officers. 5 Installation of Vertical Bored cast in situ RCC piles of 300 mm diameter and M-30 grade of concrete in all types of soils, using Standardised Concrete Mix of following grade, with sulphate resistant Cement or OPC/PPC, etc and Crushed Stone Sand and 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost for placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavtion of mud pits for circulation of Bentonite soultion, closing the mud pits to original level and mud removal with initial lead and lift but including dismantling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing as per 15.2.2. Testing to be conducted at both the ends at site as well as RMC plant. Pile driving depth should be decided by the departmental officers at site. The length of pile for payment shall be measured from top of shoe to the bottom of the pile cap. (Cost of Reinforcement provided for Pile and Welding charges shall be measured and Paid separately) 6 Installation of Vertical Bored cast in situ RCC piles of 380 mm diameter and M-30 grade of concrete in all types of soils, using Standardised Concrete Mix of following grade, with sulphate resistant Cement or OPC/PPC, etc and Crushed Stone Sand and 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost for placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavtion of mud pits for circulation of Bentonite soultion, closing the mud pits to original level and mud removal with initial lead and lift but including dismantling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing as per 15.2.2. Testing to be conducted at both the ends at site as well as RMC plant. Pile driving depth should be decided by the departmental officers at site. The length of pile for payment shall be measured from top of shoe to the bottom of the pile cap. (Cost of Reinforcement provided for Pile and Welding charges shall be measured and Paid separately) 7 Installation of Vertical Bored cast in situ RCC piles of 450 mm diameter and M-30 grade of concrete in all types of soils, using Standardised Concrete Mix of following grade, with sulphate resistant Cement or OPC/PPC, etc and Crushed Stone Sand and 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost for placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavtion of mud pits for circulation of Bentonite soultion, closing the mud pits to original level and mud removal with initial lead and lift but including dismantling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing as per 15.2.2. Testing to be conducted at both the ends at site as well as RMC plant. Pile driving depth should be decided by the departmental officers at site. The length of pile for payment shall be measured from top of shoe to the bottom of the pile cap. (Cost of Reinforcement provided for Pile and Welding charges shall be measured and Paid separately) 8 Refilling with excavated earth in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification. 9 Supplying and filling with earth up to 10 Km for foundation and basement, etc., including watering and consolidating, etc., complete complying with standard specifications and as directed by the engineer-in-charge 10 Supplying and filling in foundation, basement, etc with Stone Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 11 Supplying and filling in foundation, basement, etc with Crushed Stone sand filling in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 12 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 13 Plain Cement Concrete 1:2:4 (one part of cement, two part of Crushed Stone Sand (M- Sand) and four part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 14 Construction of Granular sub-base of required compacted thickness by providing laying, spreading and compacting of Close graded Material conforming to Grading V of Table 400-1 of MORTH clause 401,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work. 15 Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification. 16 Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below.Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers. 17 Random Rubble masonry in Cement Mortar (1:3) etc., Complete complying with standard specification and as directed by the Departmental Officers 18 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). 19 Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid). 20 For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. 21 For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. 22 For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. 23 Centering for curved surfaces of all RCC items of work 24 Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part there of but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers. 25 Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/mᶾ and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). 26 Foundation and Basement 27 For Ground Floor 28 For First Floor 29 Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). 30 Foundation and Basement 31 Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) 32 Brick work in Cement Mortar 1:3 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9 x 4-3/8 x 2-3/4 for foundation and basement including curing, etc., complete complying with standard specifiction. 33 For foundation & basement 34 In Ground floor 35 In First floor 36 Brick partition walls of 11.50cm thickness using best quality II Class Ground Chamber Burnt Bricks of size 9 x 4-3/8 x 2-3/4 in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately). 37 Ground floor 38 Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. 39 Inner Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. 40 Outer Plastering with Cement Mortar 1:4 (One cement and Four sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. 41 Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers. 42 Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush.Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. 43 White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. 44 Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work). 45 Painting newly plastered wall surface with two coats of ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. Interior painting 46 Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 47 Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 48 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 49 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. 50 Flooring with first quality design ceramic tiles of all colours of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) 51 Paving the floor with best quality Double Charged Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M-sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be Johnson / Kajaria / Somany / Nitco / RAK which has to be got approved by Executive Engineer before use on works). 52 Providing And Fixing Machine Dressed Grey Granite Slab All Sides Machine Cut of Size 0.60 M X 0.60 M Size And 50 mm Thick Granite Slabs For Platform(Pavement) Including Cost And Conveyance ofGranite From Available Source Including Labour Charges For Fixing the Slab In Position To The LineLevel And GradientIncludingPointing With cm.1:3 And All Other Incidental Charges Etc.Complete 53 Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. 54 Paving the floor with Cement based Hydraulically pressed Anti skid tiles (pattern design) - 20 mm thick (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works). 55 Dadooing walls with Colour designed digital print ceramic tiles, with borders, with size of 300mm x 450mm x 8mm and above set in Cement Mortar 1:2 (One Cement and Two M-sand)10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be like Johnson / Kajaria / Somany / Nitco / RAK or Equivalent which has to be got approved by Executive Engineer before use on works). 56 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete 57 Nosing the granite slab - single nosing as directed by the engineer-in-charge 58 Grooving the granite slab as directed by the engineer-in-charge 59 Manufacturing, supply & fixing of precast kerb stone of size 400mmx259mmx200mm thick made of M 20 grade of concrete rectangular in shape with one corner chamfered by 100 mm x 100 mm as per approved design i/c cost of all material, labour and curing etc., complete. as per IRC 5758 - 1984. 60 Supplying and laying hydraulic pressed monolithic natural grey colour cement concrete inter locking paver block of 63mm thick, in cement concrete 1:2:4 (one cement, two sand, four aggregate) using difference design and with stand for pressure of 150 - 200 kg/m2 over the existing sand cushion by using earth rambers and also vibratting the concrete blocks often laying using plate vibrators etc, complete as directed by the departmental officers. 61 Supplying and fixing of M.S.grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification. 62 UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work 63 Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm.The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber.The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. 64 ABS DOOR Specification:Providing and fixing of ABS (Acrolynitrile Butadiene Styrene) Door using factory made plain FPVC (Foamed Polyvinyl Chloride) door frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 10 Nos. of 50mm long screw.The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners to be provided for each vertical member, stiffeners of (‘U’ Channel of size 29 x 9 x 1mm, 150mm long) 3 Nos. at hinge point, frame reinforcement of (‘U’ GI Channel of size 46 x 22 x 0.06mm), bottom tie rod of (‘U’ GI Channel size of 15 x 15 x 1mm), the ABS Shutter of 35mm thick factory made plain pre-laminated.ABS (Acrolynitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of ball bearingbutterfly hinges - 3 Nos. for each shutter and ISI make SS round lock complete, including cost of Materials, conveyance and all other incidental charges and labour charges for fixing the Door neatly etc., complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on workPlain Pre-laminated Door 65 Fabrication supply and fixing in position of aluminium natural colour matt finish louvered ventilator in all floors made with extruded aluminium section of following size with necessary accessories such as rubber beading, best quality of handle including supplying and fixing of 4 mm thick plain glass including cost of all materials, labour power consumption required for fabrication drilling holes in RCC column/floor slab/ masonry wall wherever necessary with power drills to the required extent and making good to the original condition after fixing etc., and as directed by the departmental officers etc. complete.The aluminium frames to be anodised under electrically controlled condition in accordance with ISI 1868/ 1962 specification for an average anodic film thickness of not less 15 microns and all the materials should be got approved by the Executive Engineer before use on work. Outer frame alround section of size 62x38x2mm @ 1.174 kg/ m vertical louvered section of size 60x30x4mm @ 1.27 kg/m and aluminium clips of size 19.05x10.27/11.05x1.20mm @ 0.169 kg/m. 66 Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification 67 Roofing with best quality prelaminated Polycarbonate Sheet 6mm thick of approved colour design and quality including cost of self tapping screws between washer and cutting the sheet to required slope if found necessary during execution of work, including charges for machine etc., complete, as directed by the engineer-in-charge 68 Supplying and fixing of Exterior WPC louvered panel for cladding and roofing works with material specifications: Material - WPC, Size - 2900 x 200 mm, Design exterior decorative panel, Color - Brown, Usage/Application for all kinds of exterior work, Thickness - 26mm, Core Filling - Fly Ash, Packaging Type - fully packed, etc., complete as directed by the engineer-in-charge 69 Supplying and Fixing ofCNC cut perforated Enclosure for EB transformer and EB pillar Boxes by using CNCMS Sheet (2mm thick), doorhinged with vertical support of80X40 mm TubularPost including horizontal Support and Stiffener (40 x40 x2mm)for MS sheet including Powder coating ofall structural members and labor for fitting , welding andtransportation of thematerial from thefactory to Site as directed by the engineer - in charge. 70 Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights.The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc.The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147.Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer 71 Refixing of damaged cement concrete solid block masonry in CC 1:3:6 (One of cement, three of sand and six of course aggregate) using 6mm and below HBG stone jelly with compressive strength of 50 kg/cm2 in cement mortar 1:5 (one of cement and five of sand ) including curing and neat finish etc., complete complying with standard specification and as directed by the departmental officers at site of work 72 Supplying and fixing of cement concrete solid block masonry by using solid blocks of size 400x200x150mm confirming to IS 2145-1965 made in CC 1:3:6 (One of cement, three of sand and six of course aggregate) using 6mm and below HBG stone jelly with compressive strength of 50 kg/cm2 in cement mortar 1:5 (one of cement and five of sand ) including curing and neat finish etc., complete complying with standard specification and as directed by the departmental officers at site of work. 73 Supplying and providing chain link fence with RCC posts.The RCC postswill be of 2.5m c/c and of 2.75mheight.The post will be 100mm square at top and 150mm square at bottom 2.15m height above ground level and 0.60m below ground level, in R.C.C 1:1.5:3mix using 12 to 20mm gauge stone jelly with necessary reinforcement moulding work and rendering smooth with cement at 15kg/cu.m etc., complete and fixed in c.c. foundation in 1:4:8 using 40mm size stone jelly. The foundation is of size 45x45x90 with sand filling 15cm height. The fencing will be of chain link 75mm size, 10 gauge. The height of fence is 2.0m after leaving 75mm gap from ground level including fixing the fence with the posts using G.I binding wire, etc. complet.ISI STD 74 Supplying and fixing Country wood scantlings for door, windows, joints, rafters, etc., or any other works using country wood scantlings in following lengh and complete it in all floors including labour charges for the manufacture of frames as per standard specification. 75 Country wood scantlings below 4m in length 76 Providing two legged Scaffolding using 15cm dia casurina post of 4m over all length (3m height + 0.5m Projection + 0.5m into the ground) the distance between the two rows being 1.25 and the spacing of posts being 2.0m in both the rows with two horizontal posts with 0.5m. Overlap on either side and braces at 2.0m centre to centre including longitudinal and transvers middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width, etc. in acomplete from using coil and nails - 1RM 77 For Initial height of 3.00 metre 78 For every additional height of 2.5 m above initial height of 3 m 79 Supply and fixing of 3-seater metal garden swing chair with canopy of material and specifications: Seating capacity - 3 seater swing, Material- metal, Appearance - modern with canopy, Cushion - Included, Usage/Application - balcony, garden, lounge, etc., Cushion material - polyster, etc., complete, as directed by the engineer-in-charge 80 Supplying,erectingandFixingprecast reinforcementbench with back rest. Bench shall consist of 2 nos. L shaped bases support in natural cement color of thickness 100mm, back height 1000mm, front height 450mm, base width 620mm and 5Nos Reinforced Concrete planks in red colorandsizeof 1500x100x50mm and 1no. reinforcedconcrete plank of 150x200x50mm: manufactured by using M-30 grade concrete & reinforced suitably: all parts to be joined with galvanized nuts and bolts of suitable size. 81 Supply & placing of FRP heavy duty three compartment Dustbin of size 1200 x 450 x 900 mm with top cover 82 Supply & placing of light weight concrete Dustbin of size 450 dia x 900 mm with top cover 83 Supply and placing of Monkey DustbinFRP – 2 Layers to a height of 3½ and width of 2½ 84 WATER SUPPLY AND SANITARY WORKS 85 Supplying and fixing in position best approved of BIS quality 110 mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of U clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. 86 Supply and providingPriming Tank made up of PVC, Make: SINTEX / EQUIVALENT 87 Internal water supply - Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. 88 For laying PVC pipes of dia 32mm 89 External Water Supply - Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. 90 Above Ground Level 91 For laying PVC pipes of dia 40mm 92 Below ground level 93 For laying PVC pipes of dia 50mm 94 For laying PVC pipes of dia 40mm 95 For laying PVC pipes of dia 25mm 96 Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works.(Above Ground Level) (Internal Water supply) 97 Above Ground Level 98 For laying CPVC pipes of dia 32 mm 99 For laying CPVC pipes of dia 25 mm 100 Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work. 101 Gate valve 102 Fixing Gun Metal Gate Valve of 25 mm 103 Fixing Gun Metal Gate Valve of 40 mm 104 Wheel valve 105 Fixing Gun Metal Wheel Valve of dia 25 mm 106 Fixing Gun Metal Wheel Valve of dia 40 mm 107 Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 50 mm ( 2 ) 108 Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 40 mm ( 1.5 ) 109 Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 25 mm (1.00”) 110 Supplying and fixing in position 15mm dia brass CP Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works). 111 Supplying and fixing in position Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works). 112 Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia B class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). 113 White Glazed Wash Hand Basin 114 With Pedestal 115 Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks). 116 Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). 117 Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). 118 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level. 119 For laying PVC pipes of dia 110 mm 120 Supplying and fixing in position PVC cowls of 110 mm dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). 121 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with P or S trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). 122 Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works). 123 White glazed European Water Closet with 10 litre capacity PVC flushing tank fixed on to wall 124 Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.(The urinal should be got approved by the Executive Engineer before use on works.) 125 Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works).Nahani Trap of size 100 x 75mm with stainless steel gratings 126 Supplying and fixing in position 150 x 100mm P or S stoneware gully trap A grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. 127 Supplying and fixing single phase 1 HP Monoblock pumpset as per I.S.I. specification on suitable pedestal with foundation bolt and nut including labour. Supply and fixing of starter and main switch suitable for 1 HP pumpset on suitable angle iron frame work with necessary labour including panel board.Supply and fixing 1 No. foot valve 1 for the 1 HP Mono block pumpset supply and run of 4 of 10 sq.mm. in PVC pipe with 14 SWG TC wire etc., complete. 128 Construction of Inspection chamber of size (clear 0.60x0.60x1.00) with necessary earth work excavation, sand filling, CC 1:5:10, brick work in CM 1:5, plastering in CM 1:5 12mm thick, Plastering in CM: 1:3 20mm thick, Precast slab 50mm thick, fabrication etc. complete as directed by the engineer-in-charge 129 Providing rain water recharging collection pit having a size of 900mm dia to a total height of 1200mm is 150mm above ground level and 1050mm below ground level with necessary augar bore of300mm dia to a depth of 3000mm from bottom level of collection pit and filled with 20mm HBG stone jelly inside of augar bore. The sides of collection pit provided with RCC Well ring of inner size of 900mm x 300mm x 50mm with 6mm reinforcement on both directionat 200 mm c/c using RCC 1:1/2:3 (one cement, one and half sand and three HBG jelly). The top of collection pit is finished with 50mm thick cover slab, The collection pit is filled with course river sand at top, 20mm HBG stone jelly at middle and 40mm HBG stone jelly at bottom of a depth of 300mm, 450mm and 450mm respectively. The rate is including the cost of RCC well ring and filling materials, RCC cover slab, drilling hole and labour charges for erecting the well ring etc.,and as directed by the departmental officers. 130 Supply, Fixing & commissioning of Pop up spray RD 1804 SAM PRS Series Spray bodies with high efficiency HE VAN Nozzle capable of covering radius of 0.9-4.6m at 1.0 - 2.1 Bars, pressure with Matched precipitation rate, tactile click and DU >0.7. Triple Blade Wiper Seal precisely balances flushing, flow- by and debris protection to optimize performance and durability at pop up and retraction. Precision-controlled flushing at pop-up and retraction clears debris, ensuring positive stem retraction in all soil types. Unique debris pockets hold grit in place, removing it from circulation and preventing long-term damage. Parts resistant to corrosion in treated recycled water containing chlorine. Pop spray body shall with stand upto 6.9 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures. etc., RD1804- SAM PRS-HE VAN incl installation charges 131 Supply of large capacity Disc filter 25 M³ / Hr including installation charges. (brands like Rain Bird or equivalent) 132 Flexible polyethelene irrigation pipe 16 mm dia / 2.5 / 1.1 - 1.4 mm CL - II. Netafim including installation charges. 133 Supply of endcap, nipple, start nipple, rubber grommet 16 mm dia. Netafim including installation charges. 134 Supply of Pressure compensated dripper with 2 / 4 / 8 LPH outlet flow. Rain Bird / Netafim make including installation charges 135 Supply of Micro sprinkler of half & full circle with 55 LPH output flow with necessary micro tube & stake. Rain Bird / JISL make including installation charges. 136 BOREWELL 137 Drilling of 12 dia vertical borewell so as to have a finished size of 6 dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractors rig tools, fuel, labourers etc 138 Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit 139 Drilling of 140/150 mm pilot bore - Upto 60 m Depth ending below ground level 140 Drilling of 140/150 mm pilot bore - From 60 m upto 90 m Depth ending from ground level 141 Drilling of 140/150 mm pilot bore - From 90 m upto 120 m Depth ending from ground level 142 Reaming 300 mm dia pilot bore to 400mm/ 450mm dia bore as directed by the TWAD Board Officer. 143 Upto 60 m depth ending below ground level 144 Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer. 145 Upto 60 m depth ending below ground level 146 From 60 m depth and upto 90 mt depth ending below ground level 147 From 90 m upto 120 mt depth ending below ground level 148 Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 2010 149 200mm dia CS 150 150mm dia RS 151 Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. 152 200mm dia CS 153 150mm dia RS 154 Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock 155 Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including ransportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yieldtest by V notch method. 156 Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge. 157 Supplying and fixing single phase 5 HP Monoblock pumpset as per I.S.I. specification on suitable pedestal with foundation bolt and nut including labour. Supply and fixing of starter and main switch suitable for 5 HP pumpset on suitable angle iron frame work with necessary labour including panel board.Supply and fixing 1 No. foot valve 2 for the 5 HP Mono block pumpset supply and run of 4 of 10 sq.mm. in PVC pipe with 14 SWG TC wire etc., complete. 158 LANDSCAPING WORK 159 Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete. 160 Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth. 161 Supply and stacking of pit sand / earth filling sand at site to the departmental gauge for pre measurements obtained from sand deposits and should clean without solid particles 162 Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost) 163 Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller 164 Preparation of Mounds of various size and shape by availlable excavated/ Supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer - in - charge 165 Planting of Lilly - Hymenocallis Lilly (Spider liiy) shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge 166 Planting of Plumaria Dwarf ornamental foliage Specimen plant variety of height 105- 120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 167 Planting of Duranta new gold Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 168 Supplying and Planting of Peltophorum tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 169 Planting of Bougainvillea Specimen plant variety of height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 170 Supplying and Planting of Picharidia palms variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10 height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 171 Supplying and Planting of Roystonea regia (Royal palms) palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 172 Supplying and Planting of Pungam tree sapling of height 240 –300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge 173 Supplying and Planting of Bauhinia purpurea tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed bythe site in-charge. 174 Supplying and Planting of Spathodea campanulata tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in charge. 175 Supplying and Planting of Cane Bamboo tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge 176 Planting of G2 grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 177 CHILDREN PARK AND GYM EQUIPMENTS 178 Supply and fixing of Straight Slide - 7ftLength 450cm ( 15ft ) x Width 75cm ( 2.5ft ) x Height 210cm ( 7ft ) Slide Material : Polyethylene Slide. Slide Length : 21cm ( 7ft ), Slide platform height : 120cm ( 4ft ), Base platform size : 2ft x 2ft, Platform base : Aluminium Checkered Sheet. Center Post : 114mm OD Galvanized post, Side Post : 50mm (2) OD Galvanized post, Powder coating : Electrostatic pp coating on metal parts. Area Required : Length 600cm ( 20ft ) x Width 150cm ( 5ft ) Playing age group : 3 - 10 yrs. Children capacity : 1Specification of Material:1. All Metal posts are made of Galvanized pipes with elecrostatic powder coated.2. Play components are made of Linear low density polyethylene (LLDPE ) ,UV protected, Heat resister, smooth finished with elegent designs. 3. All fastners closed with polyethylene caps for children protection. 179 Supply and fixing of Park Spiral Slide Junior (FRP)Size: L10.5 x W6 x H7Safe Area Size: L20.5 x W5 x H11.5Material specifications:Ladder : Galvanished ‘B’ Class pipe Sliding chute 9ft BED LEG :Galvanished ‘C’ Class pipeFRP thickness 4mm. (Reinforced Polymers in 5 Layers) 450 CSM Matt, 600 Roving Mat, Isotolic gel coat with PU pigment.ISI Make pipe and MS Angle and Flat with high thicknessHigh quality NTN Ball BearingHigh quality Glossy paint with primer 180 Supply and fixing of Cross Swing - 3 Seater Length 390cm ( 13ft ) x Width 120cm ( 4ft ) x Height 225cm ( 7.5ft ) Swing Seat material : LLDPE seats fitted with Stainless steel hooks. Swing Chain : PU coated coated galvanized chain Imported. Swinging Hook : Heavy duty Aluminium pressed with sealed bearing. Swing post : 114mm ( 4.5 ) OD G.I post of wall thickness 2mm, Centre post : 114mm ( 4.5 )OD G.I post of wall thickness 2mm, Playing age group : 3 - 12yrs. Children capacity : 3Specification of Material:1. All Metal posts are made of Galvanized pipes with elecrostatic powder coated.2. Play components are made of Linear low density polyethylene (LLDPE ) ,UV protected, Heat resister, smooth finished with elegent designs. 3. Swing chain made of PU coated chain , Seat made of LLDPE ( Polyethylene), Swing hooks made of Aluminium with sealed bearings.4. All fastners closed with polyethylene caps for children protection. 181 Supply and fixing of Seesaw - SingleLength 210cm ( 7ft ) x Width 90cm ( 3ft ) x Height 60cm ( 2ft )Seesaw seat material : LLDPE - Polyethylene. Qty : 2Nos.Seesaw center & side post : 89mm ( 3.5 ) OD Galvanized post,Seesaw handle post : 32mm ( 1.2 ) OD Galvanized post,Seesaw post top cap : Heavy duty Aluminium,Powder coating : Electrostatic pp coating on metal parts.Area Required : Length 300cm ( 10ft ) x Width 210cm ( 7ft )Playing age group : 3 - 10yrs.Children capacity : 2Specification of Material:1. All Metal posts are made of Galvanized pipes with elecrostatic powder coated.2. Play components are made of Linear low density polyethylene (LLDPE ) ,UV protected, Heat resister, smooth finished with elegent designs. 3. All fastners closed with polyethylene caps for children protection. 182 Supply and fixing of Park Seesaw 4 Seater (FRP Seat)Size: L8.75 x W5 x H3 Safe Area Size: L11.75 x W8 x H6 Material specifications:Frame : 1 ½” Galvanished ‘B’ Class pipeSee saw Rail :2” Galvanished ‘C’ Class pipeSeat : FRP Seat with 450 CSM Mat 3 Layers bonding. Isotolic gel coat with UV pigment.Painting with PU coating seatISI Make pipe and MS Angle and Flat with high thicknessHigh quality NTN Ball Bearing 183 Supply and fixing of Merry go round - 6 Seater Diameter 180cm ( 6ft ) x Height 75cm ( 2.5ft )Galvanized 50mm dia pipe used for outer ring.Heavy duty Tapper roller bearing setting on the base for smooth rotation.Powder coating : Electrostatic pp coating on metal parts.Area Required : Length 240cm ( 8ft ) x Width 240cm ( 8ft )Galvanized semi circle seats - 2Nos with side saftey handles.Playing age group : 3 - 12yrs.Children capacity : 6Specification of Material:1. All Metal posts are made of Galvanized pipes with elecrostatic powder coated.2. Play components are made of Linear low density polyethylene (LLDPE ) ,UV protected, Heat resister, smooth finished with elegent designs. 3. All fastners closed with polyethylene caps for children protection. 184 Supply and fixing of Spring Rider - Dinasour Polyethylene Dinasour design attached with 22mm heavy duty coil springs mounted on 10mm Base plate. Metal part powder coated. Safe area - 6ft x 6ft. Playing age group : 3 - 10yrs. Children capacity : 2 Specification of Material:1. All Metal posts are made of Galvanized pipes with elecrostatic powder coated.2. Play components are made of Linear low density polyethylene (LLDPE ) ,UV protected, Heat resister, smooth finished with elegent designs. 3. All fastners closed with polyethylene caps for children protection. 185 Supply and fixing of Park Loop RungSize: L10 x W2 x H7.5Safe Area Size: L13 x W5 x H10Material specifications:Post-Galvanished ‘B’ Class pipeTop rail-Galvanished ‘C’ Class pipeSprings –Galvanished ‘C’ Class pipe.Painting with PU coating ISI Make pipe and MS Angle and Flat with high thicknessHigh quality NTN Ball BearingHigh quality FRP Materials with U~V resistance pigments and ISO Resign and 600 GSM Mat 186 Supply and fixing of Park Flat RotorSize: L5 x W5 x H3.25’ Safe Area Size: L8 x W8 x H6.25Material specifications:Pipes - 1’’GI pipe, 3/4”GI pipe, 3”GI pipe, 2.5mm thick, B class paint: PU coatingISI Make pipe and MS Angle and Flat with high thicknessHigh quality NTN Ball BearingHigh quality FRP Materials with U~V resistance pigments and ISO Resign and 600 GSM Mat 187 Supply and fixing of Park Arch Swing 2 Seater (FRP)Size: L10 x W3 x H6.75Safe Area Size: L13 x W6 x H10Material specifications:ARC-Frame : 2.5mm thickness Galvanished ‘B’ Class pipe Top Rail : 2” Galvanished ‘C’ Class pipe with 4.5mm thickSeats : RubberChain : 8mm Stainless Steel Chain (Grade-304)Painting with PU coating ISI Make pipe and MS Angle and Flat with high thicknessHigh quality NTN Ball BearingHigh quality FRP Materials with U~V resistance pigments and ISO Resign and 600 GSM Mat 188 Supply and fixing of Air Walker Single personSize: L3.75 x W1.25 x H5 Safe Area Size: L6.75 x W4.25 x H8Material specifications:Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes (1680 x 515 x 1780 mm) 4 mm pipe Double coat Powder coating, Heavy duty Branded sealed Ball bearing, for long lasting life. Steel Foot rest / Foot Paddle for long lasting life. 189 Supply and fixing of Chest Press - Single PersonSize: L7.5 x W2.5 x H6Safe Area Size: L10.5 x W5.5 x H9Material specifications:Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes. Double coated Powder coating, Heavy duty Branded sealed Ball bearing, Steel & foot rest / Foot Paddle for long lasting life 190 Supply and fixing of Leg Press - Dual PersonDimension : L 120cm ( 4ft ) x W 45cm ( 1.5ft ) x H 130cm ( 4.3ft ) Material : Galvanized Steel. Fastners : Stainless steel 304 grade with Polycaped. Post top Cap : High density Aluminium. Handle grips : HD Rubber coated. Twister Base : Polyethylene. Bearing setting for smooth rotation. Main Post Size : 115mm / 4.5 OD G.I post of wall thickness 3mm. Handle Post Size : 32mm / 1.25 OD G.I post of wall thickness 3mm. Powder coating : 80 micron Akzo nobel electrostatic coated. Area Required : Length 180cm ( 6ft ) x Width 180cm ( 6ft )All Metal posts are made of Galvanized pipes with elecrostatic powder coated. 191 Supply and fixing of Push Up / Pull BarSize: L3.5 x W3.5 x H6.5Safe Area Size: L6.5 x W6.5 x H9.5Material specifications:Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes Double coat Powder coating, Heavy duty Branded sealed Ball bearing, for long lasting life. Steel Foot rest / Foot Paddle for long lasting life. 192 Supply and fixing of Shoulder Wheel - Single PersonSize: L2 x W2.5 x H6.25Safe Area Size: 4 x 5.5 x 9.25Material specifications:4mm pipe thick Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes Double coat Powder coating, Heavy duty Branded sealed Ball bearing, for long lasting life. 193 Supply and fixing of Excer CycleProduct Dimension : L 85cm ( 2.8ft ) x W 83cm ( 2.7ft ) x H 182cm ( 6.1ft ) Material : Galvanized Steel. Fastners : Stainless steel 304 grade with Polycaped. Post top Cap : High density Aluminium. Rotating Knobs : Polyethylene. Bearing setting for smooth rotation. Main Post Size : 115mm / 4.5 OD G.I post of wall thickness 3mm. Handle Post Size : 32mm / 1.25 OD G.I post of wall thickness 3mm. Powder coating : 80 micron Akzo nobel electrostatic coated. Area Required : Length 180cm ( 6ft ) x Width 180cm ( 6ft )All Metal posts are made of Galvanized pipes with elecrostatic powder coated. 194 Supply and fixing of Lat Pull Down - Single personDimension : L 100cm ( 3.3ft ) x W 75cm ( 2.5ft ) x H 180cm ( 6ft ) Material : Galvanized Steel. Fastners : Stainless steel 304 grade with Polycaped. Post top Cap : High density Aluminium. Handle grips : HD Rubber coated. Seat & Back rest : Polyethylene. Bearing setting for smooth rotation. Main Post Size : 115mm / 4.5 OD G.I post of wall thickness 3mm. Handle Post Size : 50mm / 2 OD G.I post of wall thickness 3mm. Powder coating : 80 micron Akzo nobel electrostatic coated. Area Required : Length 180cm ( 6ft ) x Width 180cm ( 6ft )All Metal posts are made of Galvanized pipes with elecrostatic powder coated. 195 Supply and fixing of Sit Up BoardDimension : L 142cm ( 4.7ft ) x W 112cm ( 3.7ft ) x H 63cm ( 2.1ft ) Material : Galvanized Steel. Fastners : Stainless steel 304 grade with Polycaped. Post top Cap : High density Aluminium. Base material : 25mm OD Galvanized Oval pipes. Post Size : 115mm / 4.5 OD G.I post of wall thickness 3mm. Post Size : 45mm / 1.5 OD G.I post of wall thickness 3mm. Powder coating : 80 micron Akzo nobel electrostatic coated. Area Required : Length 240cm ( 8ft ) x Width 240cm ( 8ft )All Metal posts are made of Galvanized pipes with elecrostatic powder coated. 196 KIOSK 197 ACP KioskSupply of Kiosk: MS Tube Frame Covered with ACP Panel Size: 3m x 2m Bottom: Bison Board 1” Thick Front: Large Door with Double Piston Left Side: Access Window Right Side: Main Door With Lock Top: ACP Sheet (Puff Panel) Table: 7.5Ft x 1.5’ Width 1no Accessories: Fan 1No, Tube light 2Nos, Switch Box 1No, MCP 1No, Exhaust Fan 1No, Wash Basin 1No, Vinyl Flooring, LED Name Board with Logo, Menu Card 198 ELECTRICAL WORKS 199 LT CT TNEB METER BOX: Supply, Installation, testing and commissioning of compartmentalised LT 3Phase, TNEB Metering box of outdoor weather proof type with MS mounting stand, Test Terminal Blocks, Internal control wiring etc., as per local TNEB standards. The box suitable for 3phase 100A service connection made up of with hylem sheet of size 2feet x 1-1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of3Nos.100A fuse units (500V),1No.neutral link,copper earth flat of size1x1/4 with interconnection of EB meter tofuse units by 16 Sq.mm PVC insulated copper wire with suitable necessary connection with earth connection complete. 200 Supply and fixing of 125A TPN Isolator in sheet steel enclosure with double breakon suitable angle iron frame work with MS cable entry boxes with earth connection only. 201 MAIN LT PANEL: Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of 2mm thick CRCA Sheet with powder coated finishing, MS base frame, double internal earthing arrangements, 125Amps, rating TPN Copper busbars with interconnection busbar, etc., comprising of the followings:EB Incomer :1 No. 125Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMMetering : 1 Set of RYB LED Indication lamps1 No. of Multifunction Meter with RS 4851 Set of Current Tranformers (125/5A, Cl-1), 1 No. 125/5A CT for APFCR1 Set of Control MCBs Outgoings: 7 Nos. 63Amps, TP+N MCCB 2 Nos. 32Amps, TP+N MCCB3 Nos. 25Amps, DP MCB[Size:2400mm (L) x 350mm (D) x 2000mm(H)] 202 APFCR PANEL - 25KVAR: Supply, Installation, testing and commissioning of 3Phase, 415Volts, 25KVAR rating APFCR (Capacitor) Panel board of Indoor, Cubicle floor / wall mounting type made out of 2mm thick CRCA Sheet with powder coated finishing, MS base /wall frame, double internal earthing arrangements, 63Amps, rating TPN Copper busbars with interconnection busbar, etc., (1 x 10KVAR + 2 x 5KVAR + 1 x 3KVAR + 1 x 2KVAR) 203 12WAY Outdoor Lighting DB - 1 to 5: Supply, Installation, testing and commissioning of Outdoor weather proof type 3Phase Outdoor Lighting DB comprising of 1 No. 63Amps, TP+N, MCCB with Extended RHOM as incomer with RYB LED Phase indication lamps, 3Phase 63Amps, 4Pole Timer internal control wiring, etc., Outgoings: 11 Nos. 16A-32Amps, 4P MCBs &3 Nos. 20Amps, DP MCBs including Copper busbar connections, interconnection cables, cable entry provisions, floor mounting frame (600mm to 900mm), etc., 204 SLDB-1 to 4 and ELV UPS DB: Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCBswitch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wallwith earth connection only.Higher End 205 Pump room DB - 1 & 2: Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 5 nos. 32A 3P MCB, 9 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 206 SupplyandLayingof31/2 Corex120 sq.mm.PVCarmouredLTUGcablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 207 SupplyandLayingof31/2 Corex70 sq.mm.PVCarmouredLTUGcablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good 208 SupplyandLayingof31/2 Corex50 sq.mm.PVCarmouredLTUGcablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 209 SupplyandLayingof31/2 Corex95 sq.mm.PVCarmouredLTUGcablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 210 SupplyandLayingof31/2 Corex25 sq.mm.PVCarmouredLTUGcablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 211 Supply and Clamping of 2 core x 10 Sq.mm PVC armoured LTUGaluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. 212 Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection 213 Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection 214 Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 215 Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection 216 Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 217 Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection 218 Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 219 Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection 220 Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 221 Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection 222 Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 223 Supply and erection of GIHotDip/PowderCoated16SWGPerforated type CableTraywith 300mm width and 50mm height with all the fixing accessories 224 Supply and Run of 2 of 2.5 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe Concealed inwall and ceiling with continuous earth wire connection of 2.5 sq mm copperwire and making good of the concealed portion 225 Supply and Run of 2 of 6 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed inwall and ceiling with continuous earth wire connection of 6 sq mm copperwire with painting of suitable colour. 226 Supply andrunof2 of4 sq.mm. PVC insulatedSC unsheathedFRLS copperconductorof1100V gradeinsuitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm copper wire and making good of the concealed portion wiith suitable colour 227 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 228 Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 229 Supply and fixing of 1 no.6/16A two modulesocket , 1 no.16A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 230 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (Primary) 231 Supply and fixing of 18W LEDRound type Recessedfitting with LED (Higher end) on false Ceiling from ceilingwith PVC unsheathed copper leads from terminals to the fitting. 232 Supply and erection of 20Watts, 4 Feet LED Fitting with LED (Higher end) end cap, PVC unsheathed copper leads from terminals to the fitting and fixing accessories 233 Supply and fixing of 60Watts All-in-One (AIO) Model Solar Street Light with 6000mm Height pole with base plate and all the fixing accessoriesThe cost is inclusive of civil foundation works including anchor fasteners,etc., as per site requirements 234 Supply and fixing of 3W RGB Light fitting (IP67) Inground fixture with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4092 - symmetrical Inground 235 Supply and fixing of spike light 6W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-Trioscope - 7052 236 Supply of One No of 9.5 mtr. Street Lamp Post With 2.7 mtr Arch Double Bracket, 1 No. of 4 Core SMC Fuse Box With Hot Dip Zinc Galvanising 237 Cost of Erection & Materials Required For 9.5 mtr Street Lamp Pole With Brackets Conventional Foundation(Material Ratio - 1:1.5:3) 238 Supply and fixing of 300mm (12) sweep(Heavy Duty) AC exhaust fan complete with necessary wall opening and making good of the wall . 239 Supply and fixing of MS / Fibre Louvers Shutters arrangements for 300mm ACExhaust Fan (M-1346) 240 Supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star ratedcomplete ( Higher end)with 2 module 100W fan step regulator (Higher end)with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18) 241 Supply and fixing of Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length including all the civil works 242 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection 243 Supply and Run of1 of No.8 SWG copper wire for earth connection 244 Supply and Run of1 of No.8 SWG copper wire in suitable PVC rigid pipeon wall / floor / ground for earth connection 245 Supply of 2mx1mRubberMatsuitablefor11KVinstallation confirming to IS 246 Supply of First Aid Box complete with all First Aid Medicines 247 Supply and fixing of Shock Treatment chart with Glass frame(in English & Local Language) 248 Supply and fixing ofMetallic Danger Board as required by the Electrical Authorities (415Volts & 230Volts) 249 Supply and Installation for 2KVA, UPS (Single Phase Input & Single Phase Output) Capacity with 2Hourse Battery back up, battery stand and interconenction cables. 250 Supply and fixing of 40Amps, 30mA DP RCCB in a suitable sheet steel enclosure and necessary fixing accessories (Higher end) 251 CCTV SYSTEM 252 Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR, with 10TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected,Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. 253 Supply of 4MP, Internet Protocol fixed BULLET CAMERA (OUTDOOR) with following specification:a) 1/2.5 Progressive Scan CMOS, b) 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)c) Face Detection d) 120dB WDR, e) BLC/3D DNR/ROI, IP67 compliedff) On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,g) Shutter Speed 1/3 s to 1/100,000 s, h) 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, i) rotate: 0° to 360°, 2.8 mm, j) horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, k) Lens Mount M12 & IR Range I5: up to 50 m, l) Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, m) Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9Wn) Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand. 254 Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse with suitable Stand. 255 Supply, Installation, Testing and Commissioning of 55 smart LED TV with following specifications a) Resolution: Ultra HD (4K) 3840 x 2160b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -2nos n) Built in LAN o) Magic remote 256 Supply and Clamping of CAT 6 unarmoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 257 Supply and laying of armoured, Multimode, Thermoplastic Tape Inner Sheathed, PVC type sheathed 6 core Optical Fibre Cable withunique fiber excess length control method provides the cable with excellent mechanical and environmental properties and Cable - 2 Embedded FRP provides tensile strength & Anti-buckling properties. It is processed with Filling jelly - Thixotropic jelly to prevent Water ingress in loose tube. 258 Supply and Termination of Optical Fibre Cable Single Point ( Point to Point ) Splicing and arrangement charges. 259 Supply and fixing of POE 8port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 260 Supply and Fixing of Rack with Accessories -Higher end6U Rack with fan extra for the above rack. (speaker/data/cctv) 261 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 262 Supply, Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges. 263 Supply and fixing of outdoor 4X6PVC box with 102mmX77mmX102mm with all fixing accessories. 264 Supply and Erection of 6mtrLengthpole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.The Pole Should be hot dip Galvanized confirming to BESN ISO-1461 with thickness of 65 Micron 265 PA SYSTEM 266 Supply, Installation,Testing & commisioning of 30 watts 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn WALL / COLUMN speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. 267 Supply, Installation,Testing & commisioning of 480 watts P.A Booster Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 wattsRMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db. 268 Supply, Erection,testing & Commisioning of custom built table top 4 zone micro processor based 1 way announcement console cinsisting of teleline preamplifier , 1 x priority module , 12 zone selector module , all call switch module , tone oscilator modulefor fire evacation, press to talk switch module,goose neck microphone ,24v dc rectifier module, power supply uit , all call relay module etc as required.(Delegate unit) 269 Supply and Fixing of Rack with Accessories -Higher end6U Rack with fan extra for the above rack. (speaker/data/cctv) 270 Supply, run, testing and commissioning of2Core x 1.5sq sqmm PVC insulated Armoured Speaker Cable in suitable 25mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
38.
Public Administrative Department #10196264 Price Bid
Supply Of Sanitary Napkin Incinerator ( Destroys Solid Sanitary Napkins Hygienically, Powder Coated Steel Body, User Friendly Features And Easily Usable, Operates On Electricity, Burns 150 To 200 Napkins Per Day, Can Be Programmed For Cycles / Day, Burns Napkins Completely Producing Only Less Than 1 Gm Of Ash Per Napkin, Ash Collection Tray For Easy Cleaning, Automatic Temperature Maintenance, Auto Power Off, Auto Thermal Cut-Off For Safety Of User, Ceramic Insulation For Excellent Thermal Protection, Wall Mountable The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Others , Supply Ofhand Cart With Double Tyre Wheelbarrow With Big Bucket Angle Frame 3 X 2 X 1 Foot The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Supply Ofmechanized Chopping Machine The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Supply Of Sieve Machine The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Supply Of Tools & Accessories [ Spade ( 2Nos ) , Belcha ( 3Nos ) , Jhari ( 2Nos ) , Weight Machine ( Up To 100 Kg Weight ) Etc. ] The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
West Bengal View Result →
39.
Educational and Research Institute #10194132 Price Bid
Surgical And Disposable Item Rate Contact Surgical And Disposable Item Rate Contact In Pddu Hospital, Jaipur , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit , 1 Pcs Trasnparent Colostomy Body Fit Bag 60Mm , 100% Polysiloxane Based Scar Management , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit , 2 Pcs Convex Base Ostomy Body Fit 70 Mm Kit , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm , 2 Pcs Convex Base Ostomy Body Fit Bag 70 Mm , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit , 2 Pcs Flat Base Ostomy Body Fit 70 Mm Kit , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm , 3- French Diagnostic Catheters For Neonatal Use 3 Fr. , 3 Way Adopter , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 100Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 10Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 150Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 50Cm (Non Pyrogenic & Single Use) , 3-D Mesh , 6,1/2 Circle Cutting 48 Mm Ccs,Stainless Steel 4 X 45 Cm , 6,1/2 Circle Round Body 44 Mm Blunt Point Stainless Steel 2 X 75 Cm , 6,1/2 Circle Round Body 44 Mm Blunt Point,Stainless Steel 4 X 45 Cm , Abdominal Belt 14Cm , Abdominal Binder 25Cm , Abdominal Drain Kit (With Collection Bag 2000 Ml Size 24 , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) Size 28 , Abdominal Drain Kit,Sterile,Having Drainage Cather And Collection Bag(2000) Ml Size 32 , Abdominal Support 9 , Abdominal Wound Drain , Abs Wrap (Neoprene) , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture, Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Loop Ct Sgle Armed 65 Mm Needle 122 Cm Suture Size 1 , Absorbable Gelatin Sponge 80 X 50X 10Mm , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 2-0 Rb ½ Circle 30 Mm 70 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 3-0 Cc 3/8 Circle 16 Mm 45 Cm 2442 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 4-0 Cc 3/8 Circle 16 Mm 45 Cm 2442 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Cc 3/8 Circle 16 Mm 45 Cm 2442 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm 2670 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 6-0 Rc Micro Point ¼ Circle 8 Mm 45 Cm 2670 , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 Mm Length 90Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle Rb 31Mm Needle, Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)1/2 Cir Rb Needle Size-1/0 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1 1/2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture (Synthetic)Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40Mm Length 90 Cm , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Contrast Needle 20-26Mm,Suture Length 70Cm) , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Loop Monofilament Polydiaxanone Violet No 1 40Mm1/2 Circle Reverse Cutting Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cm Size 3-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cm Size 4-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 2-0 Rb 30 Mm Needle Length 75 Cm , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial Coated Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial With Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate,Size 3/0 (1/2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 4/0 (1/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) , Absorbable Surgical Sutures,Sterilised Needled Polyglecaprone/Polyglyconate,Monofilament Sutures Size 2/0 (1/2 Circle Oval Rb Needle 26Mm Needle,Suture Length Of 70Cm) , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm 1/2 Circle Taper Point , Absorbarble Fixation Device All Sizes - Secure Strap 25 , Absorbent Cotton Wool I.P. 200Gm (Non Sterile) , Absorbent Cotton Wool I.P. 75 Gm (Non Sterile) , Act Tubes Us Fda + Ce/ Dgci Approved· , Actim Partis Rapid Test , Activated Dialdehyde Solution (Cidex & Others ) , Adult Conventional Dual Limb Water Trap , Adult Conventional Single Water Trap , Adult Endotracheal Sizes 10Mm. , Adult Endotracheal Sizes 5.5Mm. , Adult Mask For Tracheostomy , Adult Single Heated Wire Breathing System , Adult Ventilator Circuit Single Limb Portable , Adult Ventilator Circuit Single Water Trap , Advance Bipolar Hand Activated Probe For Open Surgery With 13Mm Shaft Diameter And 20 Cm Shaft Length , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 45 Cm Shaft Length With 5 Mm Wide , Advanced Bipolar Tissue Sealer 25 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm , Advanced Bipolar Tissue Sealer 45 Cms With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm , Ahg (Coombs) (1X10) , Air Mattress , Alcohol Swab , Alice Forceps 6 , Aluminium Foil , Ambu Bag Mask (Adult) (Autoclavable)(Silicon) , Ambu Bag Mask (Adult) (Non-Autoclavable) , Ambu Bag Mask (Child/Infant) (Autoclavable)(Silocon) , Ambuaura No. 3 , Ambuaura No. 4 , Amplatz Catheter Amplatz Left (Al) 4Fr , Amplatz Catheter Amplatz Left (Al) 5Fr , Amplatz Catheter Amplatz Left (Al) 6Fr , Amplatz Catheter Amplatz Left (Al) 7Fr , Amplatz Catheter Amplatz Left (Al) 8Fr , Amplatz Catheter Amplatz Right (Ar) 4Fr , Amplatz Catheter Amplatz Right (Ar) 5Fr , Amplatz Catheter Amplatz Right (Ar) 6Fr , Amplatz Catheter Amplatz Right (Ar) 7Fr , Amplatz Catheter Amplatz Right (Ar) 8Fr , Amplatz Wire Ptfe Amplatz Type Wire In .035 And .038, Length Of 75Cm, 145Cm, 180Cm , Anatomical Face Mask Sizes -0 , Anatomical Face Mask Sizes -0A , Anatomical Face Mask Sizes -2 , Anatomical Face Mask Sizes -3 , Anatomical Face Mask Sizes -4 , Anatomical Face Mask Sizes -5 , Anatomical Face Mask Sizes -6 , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Angiographic Double Leumen Tracking Catheter 4 French , Angiographic Double Leumen Tracking Catheter 5 French , Angiographic Double Leumen Tracking Catheter 6 French , Angiographic Sizing Pigtail Catheter 5Fr , Angiographic Sizing Pigtail Catheter 6Fr , Angiographic Sizing Pigtail Catheter 7Fr , Angiography Catheter 4F-6F , Angiography Needle 18G , Angiography Needle 19G , Angiography Needle 20G , Angiography Needle 21G , Angiography Radial Catheters 4-6F , Angiography Wire Long Length Ptfe Guidewire In .035, .038, , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length , Ankle Binder , Ankle Brace , Ankle Splint , Ankle Support (Neoprene) , Anklet (Pair) , Anklet Comfeel (Single) , Anterior Chamber Iol , Anti A.B.C. Set (1X10) , Anti Bacterial Liquid Hand Wash 250Ml , Anti Bacterial Liquid Hand Wash 500Ml , Anti H For Bombay Groping , Anti Microbial Gloves 6 Inches , Anti Microbial Gloves 6.5 Inches , Anti Microbial Gloves 7 Inches , Anti Microbial Gloves 7.5 Inches , Anti Microbial Gloves 8 Inches , Antimicrobial Silver Dresssing Sterile 15X20cm , Antimicrobial Silver Dresssing Sterile Sizes:10X12cm , Aortic Punch 2.5 , Aortic Punch 3 , Aortic Punch 3.5 , Aortic Punch 3.6 , Aortic Punch 4 , Aortic Punch 4.5 , Aortic Punch 5 , Aortic Punch 5.5 , Aprin Plastic , Apron Cloth (White) , Apron For Paramedical Staff , Apron, Plastic, Disposable, Adult Size , Arterial Pressure Monitor Lines (100 Cm Long) , Arterial Pressure Monitor Lines (150 Cm Long) , Arterial Pressure Monitor Lines (200 Cm Long) , Arthoscopy Drape , Articulating Endo Cutter - 35Mm White/Blue , Asepto Pump , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Ash Brace (Hyper Extension Brace) , Auto Clave Lable , Autoclave Signal Lock (Indicator) , Auxiliary Crutch (Pair) , Av Line , B P Armlet Cloth (Adult & Pead.) , B P Armlet Rubber (Adult & Pead.) , B P Bulb With Connector(Adult & Pead.) , B P Cuff Adult , B P Cuff Neonatal , B P Cuff Pediatric , B P Instrument Digitalpediatric & Adult , B P Instrument Mercury(Pediatric & Adult) , B.B Silk Suture (3/8 Cir Rb Needle 16Mm, Length 76 Cm Size 5/0 , B.B Silk Suture (3/8 Cir Rb Needle 20Mm, Length 76 Cm Size 4/0 , B.P. Bulb , Baby Care Kit , Baby Diapers Large , Baby Diapers Medium , Baby Diapers Small , Back Rest L , Back Rest M , Bacterial Filter , Bain Circuit (Adult) , Bain Circuit (Child) , Bakri Baloon , Balloon Inflation Catheter , Balloon Tipped Angiography Catheter 5F , Balloon Tipped Angiography Catheter 6F , Balloon Tipped Angiography Catheter 7F , Bandage Cotton 3Mtr*2 , Bandage Cotton 3Mtr*3 , Bandage Cotton 3Mtr*4 , Bandage Cotton 3Mtr*6 , Bandage Suspensory , Bare Platinum Coil Complex Shape, Soft, Electrolytic Detachable 1 To 25Mm , Bare Platinum Coil Complex Shape, Soft, Mechanically Detachable 1 To 25Mm , Bare Platinum Coil Helical Shape, Soft, Electrolytic Detachable 1 To 25Mm , Bare Platinum Coil Helical Shape, Soft, Mechanically Detachable 1 To 25Mm , Basin 40 Cm , Basx 11Mm X 100Mm Trocar And Stability Sleeve , Basx 12Mm X 100Mm Trocar And Stability Sleeve , Basx 5Mm X 100Mm Trocar And Stability Sleeve , Basx Bladeless Sleeve , Battery Operated 60Mm Articulating Endo Cutter With A Disposable Battery Pack , Below Knee Stockings , Berman Catheter 4 French , Berman Catheter 5 French , Berman Catheter 6 French , Berman Catheter 7 French , Bio Medical Waste Bags Barcoded Vergine Grad-1 Black (24X26)Iso&Ce(Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Black (24X28)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Black (29X39)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Blue (24X26)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Blue (24X28)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Blue (29X39)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Green (24X26)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Green (24X28)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Green (29X39)Iso&Ce(Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Red (24X26)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Red (24X28)Iso&Ce(Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Red (29X39)Iso&Ce(Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Yellow (24X26)Iso&Ce (Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Yellow (24X28)Iso&Ce(Per 1 Kg) , Bio Medical Waste Bags Barcoded Vergine Grad-1 Yellow (29X39)Iso&Ce (Per 1 Kg) , Biological Glue With Thrombin & Aprotinin 1Ml , Biological Glue With Thrombin & Aprotinin 2Ml , Biopsy Guns 14G 10Cm , Biopsy Guns 14G 16Cm , Biopsy Guns 16G 10Cm , Biopsy Guns 16G 16Cm , Biopsy Guns 18G 10Cm , Biopsy Guns 18G 16Cm , Biopsy Guns 18G 20Cm , Biopsy Guns 18G 25Cm , Biopsy Guns 20G 10Cm , Biopsy Guns 20G 16Cm , Bipsy Gun With Compitible Co-Axial Needle 12Gx11cm , Bipsy Gun With Compitible Co-Axial Needle 12Gx15cm , Bipsy Gun With Compitible Co-Axial Needle 12Gx20cm , Bipsy Gun With Compitible Co-Axial Needle 14Gx11cm , Bipsy Gun With Compitible Co-Axial Needle 14Gx15cm , Bipsy Gun With Compitible Co-Axial Needle 14Gx20cm , Bipsy Gun With Compitible Co-Axial Needle 16Gx11cm , Bipsy Gun With Compitible Co-Axial Needle 16Gx15cm , Bipsy Gun With Compitible Co-Axial Needle 16Gx20cm , Bipsy Gun With Compitible Co-Axial Needle 18Gx11cm , Bipsy Gun With Compitible Co-Axial Needle 18Gx15cm , Bipsy Gun With Compitible Co-Axial Needle 18Gx20cm , Bipsy Gun With Compitible Co-Axial Needle 20Gx11cm , Bipsy Gun With Compitible Co-Axial Needle 20Gx15cm , Bipsy Gun With Compitible Co-Axial Needle 20Gx20cm , Black Goggles , Block Used In Thyroplasty (Sialestic And Gortex) 70*50 Mm With 20 Mm Thickness , Blood Administration Set Blood Transfusion Set , Bmw Plastic Container Small White (0.08 Litre) , Bmw Plastic Container Small White (1.50 Litre) , Bmw Plastic Container Small White (3.50 Litre) , Bmw Plastic Container Small White (5.00 Litre) , Bmw Sefety Card Box Blue(05 Litre) , Bmw Sefety Card Box Blue(10 Litre) , Bmw Sefety Card Box Blue(20 Litre) , Bone Cement , Bone Marrow Biopsy Needle 11G 4 & 6 , Bone Marrow Biopsy Needle 13G 3.5 , Bone Marrow Biopsy Needle 8G 4 & 6 , Bone Wax Sterilised , Bovine Albumin (1X10) , Bowl 12 Cm , Bp Blade , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Braided E-Caprolactone Coated Lactomer 1 90Cm Gs-25 , Undyed 37-40Mm 1/2 Circle Reverse Cutting , Braided E-Caprolactone Coated Lactomer 1, 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Undyed 37-40Mm 1/2 Circle Reverse Cutting , Braided E-Caprolactone Coated Lactomer 2-0 90Cm Gs-21 , Undyed 30Mm 1/2 Circle Taper Point , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting , Braided E-Caprolactone Coated Lactomer 3-0 75Cm Cv-25 , Violet 20-22Mm 1/2 Circle Taper Point , Braided Polyester Caoted With Polybutylate 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Polybutylate 2-0 10X75 2X Plgt, Blue & White 25Mm 1/2 Circle Taper Point Oval Pledget , Braided Polyester Caoted With Polybutylate 2-0 8X75cm 2X Plgt , Blue & White 16Mm 1/2 Circle Tapercutting Oval Pledget , Braided Polyester Caoted With Polybutylate 5, 55Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 2-0 10X75 2Xcv-305 Pgt , Blue & White 25Mm 1/2 Circle Taper Point Oval Pledget , Braided Polyester Caoted With Silicon 2-0 8X75cm 2Xy-31 Plgt , Blue & White 16Mm 1/2 Circle Tapercutting Oval Pledget , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm , Breast Nodule Localizationwire , Breast Pump , Bubble Cpap System With Nasal Cpap Kitshould Containneonatal 15Mm Inspiratory Limb Heated Wire 1.6M , Buffant Clip Cap , Burr Tips (70 Mm Length) Cutting /0.8 Mm , Burr Tips (70 Mm Length) Cutting 0.5 Mm , Burr Tips (70 Mm Length) Cutting 0.6 Mm , Burr Tips (70 Mm Length) Cutting 1.6 Mm , Burr Tips (70 Mm Length) Cutting 2.3 Mm , Burr Tips (70 Mm Length) Cutting 2.8 Mm , Burr Tips (70 Mm Length) Cutting 3 Mm , Burr Tips (70 Mm Length) Cutting 3.5 Mm , Burr Tips (70 Mm Length) Cutting 4 Mm , Burr Tips (70 Mm Length) Cutting 5 Mm , Burr Tips (70 Mm Length) Diamond /0.8 Mm , Burr Tips (70 Mm Length) Diamond 0.5 Mm , Burr Tips (70 Mm Length) Diamond 0.6 Mm , Burr Tips (70 Mm Length) Diamond 1.6 Mm , Burr Tips (70 Mm Length) Diamond 2.3 Mm , Burr Tips (70 Mm Length) Diamond 2.8 Mm , Burr Tips (70 Mm Length) Diamond 3 Mm , Burr Tips (70 Mm Length) Diamond 3.5 Mm , Burr Tips (70 Mm Length) Diamond 4 Mm , Burr Tips (70 Mm Length) Diamond 5 Mm , Burr Tips Fissure Burr 70 Mm To 95 Mm Length 1 Mm , Burr Tips Fissure Burr 70 Mm To 95 Mm Length 3, Mm , Burr Tips Fissure Burr 70 Mm To 95 Mm Length 5 Mm , By-Pass Graft Catheter 4Fr , By-Pass Graft Catheter 5Fr , By-Pass Graft Catheter 6Fr , By-Pass Graft Catheter 7Fr , By-Pass Graft Catheter 8Fr , Caeseream Drap Sheet Sterile Disposable , Capillary Tube Glass , Capsular Tension Ring , Capsular Tension Ring 10 Mm , Capsular Tension Ring 11 Mm , Capsular Tension Ring 12 Mm , Carbolic Acid (Phenol) 400 Ml , Carreegated Rubber Drainage Card/Sheet , Cast Cover , Cast Shoe , Casting Tape Synthetic , Casting Tape Synthetic 12.5Cm X 3.6 Mtr , Casting Tape Synthetic 15Cm X 3.6 Mtr , Casting Tape Synthetic 7.5Cm X 3.6 Mtr , Catheter Mallecot , Catheter Mount , Catheter Plain Rubber , Catheter Stabilization Device Sterile Latex Free Sutureless , Catheter Suction , Catheter Supracath , Catheter,Size 10(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Catheter,Size 16(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Catheter,Size 18(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Catheter,Size 20(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Catheter,Size 22(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Catheter,Size 24(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Catheter,Size 8(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material , Cautery Lead Hand Switch , Cautery Lean Monopolar , Cautery Patient Plate Code 4 , Cautry Hand Switch , Ceasarian Drape With Funnel 35X15 , Centella Asiatica Extract Based Skin Moisturization And Antiscar Gel , Central Line Quadra Lumen 8.5 Fr With 15Cm / 20Cm Catheter , Central Line Quadra Lumen 8.5 Fr With 15Cm / 20Cm Catheter , Central Line Triple Lumen 8.5 Fr With 16Cm / 20Cm Catheter , Central Neck Line- Double Lumen (3 Nobel Metal Coated (Gold, Silver, Palladium)Central Lumen Catheter, Double Lumen) , Central Venous Catheter Double Lumen , Central Venous Catheter Double Lumen (Pead) , Central Venous Catheter Double Lumen Pro , Central Venous Catheter Single Lumen , Central Venous Catheter Single Lumen (Pead) , Central Venous Catheter Single Lumen Pro , Central Venous Catheter Triple Lumen , Central Venous Catheter Triple Lumen (Pead) , Central Venous Catheter Triple Lumen Pro , Cervical Collar Hard Adjustable , Cervical Collar Soft , Cervical Collar Soft With Support , Cervical Collar With 12 Sizes Settings , Cervical Collar With 16 Sizes Settings , Cervical Orthosis (Philadelphia) Ethafoam , Cervical Orthosis (Philadelphia) Plastazote , Cervical Pillow Regular , Cervical Traction Head Halter , Cervical Traction Kit (Sitting) , Cervical Traction Kit (Sitting) With Weight Bag , Cervical Traction Kit (Sleeping) , Cervical Traction Spreader Bar , Chemotherapy Port & Non-Coring Needles(Pediatric) , Chemotherapy Port And Non-Coring Needles(Adult) , Chest Binder , Chest Drainage Catheter , Chest Drainage Catheter With Trocar Insitu (Set) , Chlorhexidine Gauze Dressing 10Cmx10cm Tin , Chlorhexidine Gauze Dressing 10Cmx30cm Pouch , Chlorhexidine Impregnated Paraffin Gauze 30X10 Cm , Chlorhexidine Impregnated Paraffin Roll 15 Cm X 1 , Chromic Catgut Suture(3/8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm) Size 6/0 , Chromic Catgut Suture(3/8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm) Size 4/0 , Chromic Catgut Suture(3/8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm) Size 5/0 , Cidex Tray With Lid Pvc , Cineon Cartidege , Circular Cartidege , Circular Stapler 33Mm , Clavicle Brace With Buckle , Clavicle Brace With Velcro , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) 10 No , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) 8 No , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) No. 12 , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) No. 14 , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 18 , Close Wound Drainage Set For Major Surgery , Closed Suction Catheter For Paediatrics 10Fr , Closed Suction Catheter For Paediatrics 12Fr , Closed Suction Catheter For Paediatrics 5Fr , Closed Suction Catheter For Paediatrics 6Fr , Closed Suction Catheter For Paediatrics 7Fr , Closed Suction Catheter For Paediatrics 8Fr , Closed Suction Catheter Has Isolated Turbo Cleaning Chamber 12 Fr. , Closed Suction Catheter Has Isolated Turbo Cleaning Chamber14 Fr. , Closed Suction Catheter Mdi Port 12 Fr. , Closed Suction Catheter Mdi Port 14 Fr. , Clot Retrieval Sheath 16Fr , Clot Retrieval Sheath 20Fr , Clot Retrieval Sheath 24Fr , Coeliac Axis Catheter , Collar Soft (Firm Density) , Colostomy Bag, Complete Unit , Combind Spinal Epidural Kit Big , Combined Dressing Pad 10X10 , Combined Dressing Pad 20X20 , Commbs Card For Cross Match (1X144 Test) , Compression Stocking Below Knee , Compression Stocking Mid Thigh , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy With Ace Plus Shear Hp054 , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy With Focus Plus Shear- Hp Blue , Contoured L.S. Support , Cool Bandage , Core Biopsy Instrument With Compatible Co-Axial Needle (Automatic Disposal) , Cotton Bandages (Non Sterile) , Size 10 Cm X 4M , Cotton Bandages (Non Sterile) , Size 7.5 Cm X 4M , Cotton Duret Size : 12’X15’ , Cotton Duret Size : 15’ X18’ , Cotton Roll400 Grams , Cotton Roll 100 Grams , Cotton Roll 200 Grams , Cournard Catheter 4 French , Cournard Catheter 5 French , Cournard Catheter 6 French , Cournard Catheter 7 French , Cournard Catheter 8French , Cover Slip , Crepe Bandage B.P. 10 Cm X 4 Meter , Crepe Bandage B.P. 15 Cm X 4 Meter , Crescent , Crescent Knife , Curtain Cloth Cotton , Curved Cutter Stapler 40 Mm Linear Cutter , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm , Cutting & Coagulations Device With With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. , Cutting &Coagulations Device With Tissue Fusion Ligasure Technology , Cutting &Coagulations Device With Tissue Fusion Ligasure Technology Instrument For Open Surgeries , Cutting &Coagulations Device With Tissue Fusion Ligasuretechnology Have Vessel Sealing Instrument For Open Surgeries , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer , Cutting &Coagulations Device With With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. , Cvp Manometer , Dead Body Bag 7X3 Ft Size , Diagnostic Catheter Ar 1 Aka Amplatz Right 5Fr , Diagnostic Catheter Ar 1 Aka Amplatz Right 6Fr , Diagnostic Catheter H 1 Aka Headhunter 4Fr , Diagnostic Catheter Pigtail 5Fr , Diagnostic Catheter Sim 1 Aka Simmons 4Fr , Diagnostic Catheter Sim 1 Aka Simmons 5Fr , Diagnostic Catheter Sim 2 Aka Simmon 5Fr , Diagnostic Catheter Sim 3 Aka Simmon 5Fr , Diagnostic Catheter Vert Angled Tip 125Cm , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Diaper Adult Ext. Large , Digital Thermometer , Disposable 10 Mm Endoscopic Clip Applier Large Size , Disposable 10 Mm Endoscopic Clip Applier Medium/Large Size , Disposable Baby Carryingsheet , Disposable Bed Sheet (100*150Cm) , Disposable Bed Sheet (120*200Cm) , Disposable Bone Marrow Biopsy Needle , Disposable C-Arm Cover , Disposable Cesarean Kit , Disposable Cesarean Section Drap Sheet , Disposable Clip Applier Preloaded With 20 Clips Medium , Disposable Clip Applier Preloaded With 20 Clips Small , Disposable Delivery Kit , Disposable Laparoscopic Clip Applier Preloaded With 16 Clips, 5Mm Diameter , Disposable Laparoscopic Clip Applier With 16 Clips, 5Mm Diameter , Disposable Mva Syringe , Disposable Needle 16G X 1 Inch , Disposable Needle No 26, 22 & 24 & All Size , Disposable Non Woven Leminated Eto Sterile Bed Sheet 116X213 , Disposable Non Woven Leminated Eto Sterile Bed Sheet 130X250 , Disposable Non Woven Leminated Eto Sterile Bed Sheet 160X250 , Disposable Ot Gowns 25 Gsm , Disposable Ot Gowns 40Gsm , Disposable Pillow Cover Standard Size , Disposable Ppe Kit For Hiv Etc , Disposable Semi-Automatic Core Biopsy Instrument , Disposable Sga Anatomical Curve Sizes 1 , Disposable Sga Anatomical Curve Sizes 1.5 , Disposable Sga Anatomical Curve Sizes 2 , Disposable Sga Anatomical Curve Sizes 2.5 , Disposable Sga Anatomical Curve Sizes 3 , Disposable Sga Anatomical Curve Sizes 4 , Disposable Sga Anatomical Curve Sizes 5 , Disposable Sga Anatomical Curve Sizes 6 , Disposable Skin Drap Sheet , Disposable Spo2 Sensor , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powder Free , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powdered , Disposable Sterilized Ot Gowns All Types (Male/Femal)) , Disposable Sterilized Ot Towel Sheet All Types , Disposable Sterilized Scrub Suits All Types , Disposable Surgical Drap/Trolly Cover,All Sizes , Disposable Surgical Padsizes 10X10 Cms , Disposable Surgical Pad Sizes 10X20 Cms , Disposable Surgical Sponge 25X25 Cms , Disposable Surgical Sponge 30 X 30 Cms , Disposable Surgical Sponge 40X40 Cms , Disposable Surgical Swabsizes 5X5 Cms , Disposable Surgical Swab Sizes 10 X 10 Cms , Disposable Surgical Swab Sizes 15X15 Cms , Disposable Transducers , Distal Access Catheter 5 , Distal Access Catheter 6 , Distance Vision Drum , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Double Lumen Catheter Size- 10 Frx12 Cm , Double Lumen Catheter Size- 11.5 Frx13.5 Cm , Double Lumen Catheter Size- 12 Frx13 Cm , Double Lumen Catheter Size- 12 Frx13 Cm , Double Lumen Catheter Size- 12 Frx16 Cm , Double Lumen Catheter Size- 8 Frx9 Cm , Double Lumen Closed Suction Set , Double Lumen Endobronchial Tube Left: Size-28Fr , Double Lumen Endobronchial Tube Left: Size-32Fr , Double Lumen Endobronchial Tube Left: Size-35Fr , Double Lumen Endobronchial Tube Left: Size-37Fr , Double Lumen Endobronchial Tube Left: Size-39Fr , Double Lumen Endobronchial Tube Left: Size-41Fr , Double Lumen Endobronchial Tube Right: Size-35Fr , Double Lumen Endobronchial Tube Right: Size-37Fr , Double Lumen Endobronchial Tube Right: Size-39Fr , Double Wall Resuscitator With Peep Valve In Adult , Double Wall Resuscitator With Peep Valve In Paediatrics , Drainable Pouch 45Mm, , Drainable Pouch 57Mm, , Drainable Pouch 70Mm , Drape For I.V. Catheter , Drape Sheet 90 X 140 Cms Disposable Sterilized , Draw Sheetsize: 90 X 145 Cm (Coloured) , Draw Sheet White & Coloured 70 X 70 , Draw Sheet White & Coloured 90 X 90 , Dressing Drum 12X15 Seamless , Dropping Bottle125 Ml , Dry Lithium Heparin Pre Filled Abg Syringe With Air Removal Filter Cap 1Ml , Dry Lithium Heparin Pre Filled Abg Syringe With Air Removal Filter Cap 3Ml , Duraplast:- 1 & 1.5 , Duster Coarse (Ponchha) Size 60 X 60 Cms , Duster Grey Size 45 X 45 Cms , Dvt Stockings , Ear Pack/Wick (12*24 Mm Length) , Ecg Electrode , Ecg Electrode Neonatal , Ecg Paper Role For 8208/8408 , Echelon Flex 45Mm Endocutters - 340Mm Shaft Length , Echelon Stapler 45 Mm Blue Reload , Echelon Stapler 45 Mm Green Reload , Echelon Stapler 45 Mm White Reload , Echelon Stapler 60 Mm Blue Reload , Echelon Stapler 60 Mm Gold Reload , Echelon Stapler 60 Mm Green Reload , Echelon Stapler 60 Mm White Reload , Echelon Stapler Flex 60 Mm Endopath Cutter , Eco-Shield , Eco-Shield Solution 1 Lit , Edta Vial , Eea Circular Stapler Purple Colour Medium Thick , Elastic Adhesive Bandage 2 , Elastic Adhesive Bandage 3 , Elastic Adhesive Bandage 4 , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property , Elastic Head Strap Cannulas Pediatric , Elastic Knee Support , Elastic Shoulder Immobiliser , Elastic Wrist Splint , Elbow Crutch Adjustable , Elbow O Drape , Elbow Support , Electric Plaster Cutter Armature , Element , Elongated Aerosol Mask Adult , Elongated Aerosol Mask Pediatric , Elongated Three-In-One Adult Mask , Endo Catch Specimen Removal Kit: With 34.5 Cm Shaft Length , Endo Liner Cutter Without Integrated Fresh Knife Cartridges In Sizes Of 30Mm , Endo Liner Cutter Without Integrated Fresh Knife Cartridges In Sizes Of 45Mm , Endo Liner Cutter Without Integrated Fresh Knife Cartridges In Sizes Of 60Mm , Endohook , Spatula Tip W. 4Mm Con. Foot Controlled Dispo , Endohook L-Tip, Handswitch Cotrolled Single Use , Endohook Needle-- Tip, Handswitch Controlled Dispos. , Endohook, Needle Tip 4Mm Con. Foot Controlled Single Use , Endohook, Spatula-- Tip, Handswitch Controlled Dispos , Endoloop Abs.Sur.Sut.Usp. , Endoloop Ligature Made With Polyglactin Suture Length18 Inch, Narrow At One End And Scored At Other , Endotracheal Tube No. No.2 Plain , Endotracheal Tube, Cuff - Size 4.5 , Endotracheal Tube, Cuff - Size 5 , Endotracheal Tube, Cuff - Size 6 , Endotracheal Tube, Cuff - Size 7 , Endotracheal Tube, Cuff - Size 7.5 , Endotracheal Tube, Cuff - Size 8 , Endotracheal Tube, Cuff - Size 8.5 , Endotracheal Tube, Cuff - Size 9 , Endotracheal Tube, Cuff- Size 6.5 , Endotracheal Tube, Cuffed - Size 4 , Endotracheal Tube, Plain - Size 2.5 , Endotracheal Tube, Plain - Size 3 , Endotracheal Tube, Plain - Size 3.5 , Endotracheal Tube, Plain - Size 4 , Endotracheal Tube, Plain - Size 4.5 , Endotracheal Tube, Plain - Size 5 , Endotracheal Tube, Plain - Size 5.5 , Endotracheal Tube, Plain - Size 6 , Endotracheal Tube, Plain - Size 7 , Endotracheal Tube, Plain - Size 7.5 , Endotracheal Tube, Plain - Size 8 , Endotracheal Tube, Plain - Size 8.5 , Endotracheal Tube, Plain -Size 6.5 , Epidural And Spinal Needle Kit 16/18G , Epidural Kit , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile , Et Tubeholder , Et Tube With Yellow Subglotic Suction Line , Ethicon Endopath Echelon Blue Reload Stapler , Ethicon Secure Strap 25 , Ethicon Vicryl #6-0 Absorbable Violet Braided Suture2 - 30Cm(W9575), 9.3Mm 3/8 Circle Taper Cut Bv-1 Needle , Ethicon Vicryl 8-0 Absorbable Violet Braided Suture1 - 30Cm, 8Mm 3/8 Circle Round Body Micro-Point Needle , Ethicon Vicryl Rapide Synthetic Absorbable Suture 2-0 36Mm 1/2 Circle Reverse Cutting Double Needle 90Cm , Ett Intubation Stylet , Examination Gloves Pvc Disposable , Exercising Ball , Extension Line With 3 Way Stop Cock - 200Cm , Extension Line With 3 Way Stop Cock - 25 Cm , Extra Soft Thoracic Drainage Catheter , Eye Pad, Sterile , Eye Pressure Shield , Eye Sphere Implants Implantable Grade Pmma Sphere 14Mm , Eye Sphere Implants Implantable Grade Pmma Sphere 16Mm , Eye Sphere Implants Implantable Grade Pmma Sphere 18Mm , Eye Sphere Implants Implantable Grade Pmma Sphere 20Mm , Eye Sphere Implants Implantable Grade Pmma Sphere 22Mm , Eye Sphere Implants Implantable Grade Silicone Sphere 14Mm , Eye Sphere Implants Implantable Grade Silicone Sphere 16Mm , Eye Sphere Implants Implantable Grade Silicone Sphere 18Mm , Eye Sphere Implants Implantable Grade Silicone Sphere 20Mm , Eye Sphere Implants Implantable Grade Silicone Sphere 22Mm , Eyed Needle (Half Circle) , Eyed Needle No. 10 (Round Body) , Eyed Needle No. 11 (Round Body) , Eyed Needle No. 5 (R.B.) , Eyelid Occlusion Dressing , F. Drop Splint Right/Left , Face Mask (Pedia) , Face Mask 2 Ply (Double Layer) With Certified Bacterical Filter Efficency , Face Mask Cotton White/Green , Face Mask, Disposable , Facial Closure Device Contain , Feeding Bag , Femoral Sheath Including Potts Needle 5Fr , Femoral Sheath Including Potts Needle 6Fr , Femoral Sheath Including Potts Needle 7Fr , Femoral Sheath Including Potts Needle 8Fr , Femoral Sheath Including Potts Needle 9Fr , Femoral Sheath With Needle 5F To 8F , Fenestrated Tracheostomy Tube Cuffed With 2 Inner Cannula , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters , Finger Cot , Finger Ext. Splint , Finger Splint , Flexometlic Tube 3-8.5 , Flow Regulator Extension Set Flow Rate 2Ml To 350Ml Per Hour , Foldable Hydrofobic Intra Ocular Lense With Injector 11 To 17.5 , Foldable Hydrofobic Intra Ocular Lense With Injector 18 To 24 , Foldable Hydrofobic Intra Ocular Lense With Injector 24.5 To 28.5 , Foleys Catheter New Born No 5 , Foleys Catheter New Born No 6 , Foleys Catheter No. 14 , Folleys Catheter Fixation Divice 18 To 24 Fr , Foot Step Double M.S. , Forearm Splint , Formalin Chamber 26 , Frog Splint , Full Gynae Drape , Functional Knee Support , Functional Knee Support , Gastrostomy Feeding Tube Size 12 , Gastrostomy Feeding Tube Size 14 , Gastrostomy Feeding Tube Size 16 , Gastrostomy Feeding Tube Size 18 , Gastrostomy Feeding Tube Size 20 , Gastrostomy Feeding Tube Size 24 , Gauge Bandage , Gauge Unmedicated , Gauze Than , Gel Foam , Gel For Ecg & Usg , Gel Pack For Cold & Heat Therapy 10 X 25 , Gel Pack For Cold & Heat Therapy 15 X 30 , Glass Slide , Glaucoma Drainage Implant Adult , Glaucoma Drainage Implant Paediatric , Gloves Size 6.5 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves) , Gloves Size 6.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves) , Gloves Size 7 .5Inches,Powder Free (Disposablesterile Surgical Rubber Gloves) , Gloves Size 7 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves) , Gloves Size 7 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves) , Gloves Size 7.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves) , Glucometer , Glucometer (Sugar) Strip , Gown Isolation Disposable , Gown Overlapping , Green Reload Ethicon Echelon , Guedels Airway , Guide Wire Hydrophilic Coated Angled Tip Extra Stiff , Guide Wire Hydrophilic Coated Angled Tip Soft Regular Standard , Guidewire (Ptfe Coated) , Guiding Catheter Braided Guiding Catheter In Various Shapes , Guiding Catheter Braided Guiding Catheter In Various Shapes 10 , Guiding Catheter Braided Guiding Catheter In Various Shapes 5 , Guiding Catheter Braided Guiding Catheter In Various Shapes 6 , Guiding Catheter Braided Guiding Catheter In Various Shapes 7 , Guiding Catheter Braided Guiding Catheter In Various Shapes 8 , Guiding Catheter Braided Guiding Catheter In Various Shapes 9 , Haemo Clip , Haemostatic Gelatine Sponege , Hand Activated Curved Taper Tip Coagulating Shears Compatible Focus 17 , Hand Activated Curved Taper Tip Coagulating Shears Compatible Focus 9 , Hb Strips , Heating Pad , Heating Pad Extre Large , Heating Pad Midium , Heavy Wire Linear Stapler - 30 Mm , Heavy Wire Linear Stapler -90 Mm , Heel Cup Silicon (Pair) , Heel Cushion Silicon (Pair) , Hemarrohid Miph Stapler , Hemorrhoid Proximate Pph Procedure Set , Hemorrhoidal Stapler Kit Consists Of 33Mm , Hernia Belt , Hernia Kit , High Concentration Oxygen Mask , High Flow Mask , High Pressure Tube 122,Cm With Braided , High Pressure Tube 183Cm With Braided , High Pressure Tube 25Cm With Braided , High Pressure Tube 51Cm With Braided , High Pressure Tube 76,Cm With Braided, , High Presure Injector Lines 100 Cm , High Presure Injector Lines 150 Cm , High Presure Injector Lines 200 Cm , Hiv Drape Pack (Large), Set For Doctor &Patient , Hme Filter , Hole Sheet 70 X 70 Cm Disposable Sterilized , Hole Sheet 90 X 145 Cm Disposable Sterilized , Hole Sheet 90 X 90 Cm Disposable Sterilized , Hot & Cold Pack , Hot & Cold Pack 15 X 30 , Hot Water Bag , Hot Water Bag (Super Delux) , Hot Water Bottle , Hydrophilic Diagnostic Guide Wire Radifocus Tarumo Type (Regular Length, Regular Stiffness) 0.032 Inches , Hydrophilic Diagnostic Guide Wire Radifocus Tarumo Type (Regular Length, Regular Stiffness) 0.035Inches , Hydrophilic Diagnostic Guide Wire Radifocus Tarumo Type (Regular Length, Regular Stiffness)0.025 Inches , Hydrophilic Diagnostic Guide Wire Radifocus Tarumo Type (Regular Length, Regular Stiffness)0.038 Inches , Hydrophilic Wire Hydrophilic Guidewire Of .018, .025, .035, .038 In 80Cm, 150Cm , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 180Cm, 220Cm, 260Cm Length , Hydrophillic Braided Sheath 4F To 7F , Hydrophobic Ptfe Syringe Filters, Nonsterile , I Gel No. 3 , I Gel No. 4 , I.D. Belt Baby & Mother , I.V. Dressing (Canula Fixation) , I.V. Extension Line With Female Luer Lock-Needle Free Port , I.V. Set With Dial Type Flow Controller With Locking Facility & Y Site, Luer Lock , Ice Bag , Incentive Spirometer , Incentive Spirometer , Incise Drape Film Extra Large , Incise Drape Film Large 35Cm*35Cm , Incise Drape Film Midium 30Cm*25Cm , Incise Drape Film Small 10Cm*20Cm , Infant Feeding Tube Size 10Fg , Infant Feeding Tube Size 5Fg , Infant Feeding Tube Size 6Fg , Infant Feeding Tube Size 8Fg , Infant Nasal Cannula 7 Cm Star-Lumen Tubing , Infant Prong Cpap Cannula , Inflation Device In 30Atm & 20Ml , Infrared Thermometer , Infusion Set With Microdrip,(I.V.)Sterile Disposable , Infusion Set-Moulded Drip Chamber , Insole Full Silicon(Pair) , Inspiratory Exerciser With 3 Color-Coded Balls , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conforn To Is 12227 , Insulin Syringe 100 Part , Intoducer Sheath For Adults (Size 10 Fr.) , Intoducer Sheath For Adults (Size 11 Fr.) , Intracranial Support Catheter 5 , Intracranial Support Catheter 6 , Introducer Sheath With Puncture Needle For Adults Size 4 Fr. , Introducer Sheath With Puncture Needle For Adults Size 9 Fr. , Introducer Sheaths For Pediatric Use (Size 4 Fr.) , Introducer Sheaths For Pediatric Use (Size 5 Fr. , Introducer Sheaths For Pediatric Use (Size 6 Fr.) , Ionic Silver Dressings For Low To High Exuding Wounds 10 Cms X 10 Cms , Ionic Silver Dressings For Low To High Exuding Wounds 5 Cms X 5 Cms , Ipom Mesh , Iris Hooks /Retractors , Irrigation Set For Endoscopic T.U.R. , Iv Dressing 10Cm*12Cm , Iv Dressing 10Cm14cm , Iv Dressing 5Cm*6Cm , Iv Dressing 7Cm*9Cm , Jellonet , Jhonson Buds (Cotton Buds) , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved 4Fr , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved 5Fr , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved 6Fr , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved 7Fr , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved 8Fr , Judkins Catheter (Jr) 4Fr , Judkins Catheter (Jr) 5Fr , Judkins Catheter (Jr) 6Fr , Judkins Catheter (Jr) 7Fr , Judkins Catheter (Jr) 8Fr , Judkins Catheter (Pediatric) 4 French , Judkins Catheter (Pediatric) 5 French , Judkins Catheter (Pediatric) 6 French , Judkins Catheter Pigtail 4Fr , Judkins Catheter Pigtail 5Fr , Judkins Catheter Pigtail 6Fr , Judkins Catheter Pigtail 7Fr , Judkins Catheter Pigtail 8Fr , Jute / Rubber Matting For Doors , K Wire, Length 375 Mm; 1.6Mm , K Wire, Length 375 Mm; 1.8Mm , K Wire, Length 375 Mm; 1Mm , Keratome 2.8Mm , Keratome Knife , Keratone 5.2 Mm , Kimvent Bal Cath 13Fr , Kimvent Bal Cath 16Fr , Knee Brace , Knee Cap (Pair) , Knee Cap (With Flexi Hinge) Pair , Knee Cap (With Rigid Hinge) Pair , Knee Cap Comfeel (Single)Pair , Knee Cap Open Patella (Single) , Knee Immobilizer 14 , Knee Immobilizer 19 , Knee Immobilizer 22 , Knee O Drape , Knee Support Hinged (Neoprene) , Knee Support Sportif (Neoprene) , Knee Wrap (Neoprene) , Knife Module , Labour Table Sheet(90*140Cm) Disposable , Lacrimal Intubation Set For Dcr Surgery , Lamino Spinal Drape , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm , Laparoscopic Liner Cutter With Cartridges In Sizes Of 30Mm , Laparoscopic Liner Cutter With Cartridges In Sizes Of 45Mm , Laparoscopic Liner Cutter With Cartridges In Sizes Of 60Mm , Laparoscopic Shears 5Mm Diameter,36Cm Long, 15Mm Curved Coated Blade , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade , Laparoscopic Shears 5Mm Diameter,45Cm Long, 15Mm Curved Coated Blade , Laparoscopy Int Drape , Laproscopic Hook , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32 Cm , Laproscopic Knotless Pga -Pcl Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Unidirectional Taper Point 26 Mm & 20 Cm Size 2-0 , Laproscopic Knotless Polydiaxonone With Fixation Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Polydiaxonone With Fixation Tab Reverse Cutting 36 Mm & 45 Cm Suture Size 1 , Laproscopic Knotless Polydiaxonone With Fixation Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Polydiaxonone With Fixation Tab Taper Point 36 Mm & 45 Cm Suture Size 1-0 , Laproscopic Port With Trocar , Laryngeal Mask (Pvc) , Laryngeal Mask (Silicone) , Laryngoscopeadult) , Laryngoscope Blade(Various Size) , Laryngoscope Bulb(As Per Sumple) , Laryngoscope Pediatric , Latex Folley Balloon Catheter 12No , Latex Folley Balloon Catheter 6No , Layngeal Mask Silken , Lead Apran (Super Deluxe) , Lederflex 22 G/80 Mm , Leg Bag (Spare) Disposable , Leg Bag Set Disposable , Leg Cover Medium Disposable Sterilized , Leg Traction Brace , Lense Tip , Ligaclips - Large , Ligaclips - Medium , Ligaclips - Medium Large , Ligaclips - Small , Light Weight Monofilament Polypropylene Mesh Size Extra Large Left 12.4Cm * 17.3 /16*12 Cm , Light Weight Monofilament Polypropylene Mesh Size Extra Large Right 12.4Cm * 17.3/16*12 Cm , Light Weight Monofilament Polypropylene Mesh Size Large Left 10.8*16Cm /15*10 Cm , Light Weight Monofilament Polypropylene Mesh Size Large Right 10.8*16Cm /15*10 Cm , Linear Cutter - 100 Mm - Blue , Linear Cutter - 55 Mm - Blue , Linear Cutter - 75 Mm - Blue , Linear Cutter 55Mm With Six Rows , Linear Cutter 75Mm With Six Rows , Linear Cutter With Varied Staple Height Tri-Staple Gia 60 Mm , Linear Cutter With Varied Staple Height Tri-Staple Gia 80 Mm , Linear Stapler With Blue Reload- 30Mm , Linear Stapler With Green Reload-30Mm , Liss Diluents (1X250ml) , Lithotomy Drap Sheet Sterile Disposable , Liver Access And Biopsy Needle Set , Lma Classic No. 4, 5 & Others , Loadable Microsphere 100-300 Micron , Loadable Microsphere 30-60 Micorn , Loadable Microsphere 50-100Micron , Long Braded Contra Lateral Introducer Sheath Sizes 6Fr , Long Braded Contra Lateral Introducer Sheath Sizes 6Fr , Long Braded Contra Lateral Introducer Sheath Sizes 8Fr , Long Braded Contra Lateral Introducer Sheath Sizes 9Fr , Long Braded Introducer Sheath Sizes 8Fr , Long Braded Introducer Sheath Sizes 9Fr , Long Braded Introducer Sheath Sizes 6Fr , Long Braded Introducer Sheath Sizes 7Fr , Long Introducer Sheath (20-30 Cm Long) (Size 10Fr) , Long Introducer Sheath (20-30 Cm Long) (Size 11Fr) , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr.) , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) , Long Introducer Sheath (20-30 Cm Long) (Size 8Fr) , Long Introducer Sheath (20-30 Cm Long) (Size 9Fr) , Long Introducer Sheath (30-50 Cm Long) (Size 5Fr..) , Long Introducer Sheath (30-50 Cm Long) (Size 6 Fr..) , Long Introducer Sheath (30-50 Cm Long) (Size 7Fr.) , Long Introducer Sheath (30-50 Cm Long) (Size 8Fr.) , Long Introducer Sheath (30-50 Cm Long) (Size 8Fr.) , Long Introducer Sheath (30-50 Cm Long)(Size 10Fr..) , Long Introducer Sheath (30-50 Cm Long)(Size 11Fr.) , Long Introducer Sheath Dedicated For Transradial Access Size 4Fr , Long Introducer Sheath Dedicated For Transradial Access Size 5Fr , Long Introducer Sheath Dedicated For Transradial Access Size 6Fr , Long Introducer Sheath Dedicated For Transradial Access Size 7Fr , Long Introducer Sheath Size 5Fr , Long Introducer Sheath Size 6Fr , Long Introducer Sheath Size 7Fr , Long Introducer Sheath Size 8Fr , Long Line Pediatric No. 22G , Long Sheath For Contra Lateral Iliac/ Femoral Access 4F , Long Sheath For Contra Lateral Iliac/ Femoral Access 5F , Long Sheath For Contra Lateral Iliac/ Femoral Access 6F , Long Sheath For Contra Lateral Iliac/ Femoral Access 7F , Long Sheath For Contra Lateral Iliac/ Femoral Access 8F , Long Sheath For Contra Lateral Iliac/ Femoral Access 9F , Long Sheet 150 X 280 Cm Disposable Sterilized , Long Sheet With Impervious Material 150 X 280 Cm Disposable Sterilized , Long Sheet With Impervious Material 90 X 140 Cm Disposable Sterilized , Long Term Double Lumen Dialysis Catheter Size- 14.5 Frx19 Cm , Long Term Double Lumen Dialysis Catheter Size- 14.5 Frx23 Cm , Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 19 Cm , Long Term Double Lumen Dialysis Catheter Size 15 Fr X 23 Cm , Long60a Echelon Flex 60 Long , Ls Belt Lumbopore , Lscs Sheet Disposable Sterilized , Lumbo Sacral Belt , Lumbo Support Uni , Makcaintosh Sheet Plastic(1X2)Mtr , Male Cath , Malecot Catheter No. 8, 10, 16, 18, 20, 22, 24, 26 , Mallet Finger Splint , Manifold Manifolds In 2, 3, 5 Port , Marryland Dissector , Maryland Forcep , Mask No. 1 , Mask No. 2 , Maternity Belt All Size , Mattress For Operation Table In Three Sections (Standard Size) , Mattress Rubberised Coir Size 190 Cm X 90 Cm X 7.5 Cm Complete With Cover , Measured Volume Set 100 Ml (Latex Free) , Measured Volume Set 150 Ml , Medial Arch Orthosis (Pair) Adult , Medial Arch Orthosis (Pair) Child , Mesh 20X30 , Metatarsal Pad Silicon (Pair) , Micro Catheter 2.7 Fwith 130 Cm , Micro Catheter 2.7 Fwith 150 Cm , Micro Catheter 2.9 Fwith 130 Cm , Micro Catheter 2.9 Fwith 130 Cm , Micro Guide Wire For Microcatheter Shapable Distal End And With Torque 0.014Inch , Micro Infusion Set With Y-Injection Site & Luer Lock , Micro Shield (All Types) 100Ml , Micro Shield (All Types) 500Ml , Micro Tips Big Blue (Up To -200Ul) , Micro Tips Small Yellow Up To 1Ml) , Microcatheter Flow Dependent , Microcatheter Selective Infusion Microcatheters For Deploying Intracranial Device: Stent Deployment , Microcatheter Selective Infusion Microcatheters For Flow Diverter Delivery With Single Tip Markers 0.027Inch , Microcatheter Selective Infusion Microcatheters For Intra Cranial Aneurysm Treatment With 2 Tip Markers , Mlcr 45 With Gun , Mlcr 60 With Gun , Mlcr 80 With Gun , Monocanalicular Self Retaining Silicone Stent For Canalicular Repair , Monofilament Glycomer 1, 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm 1/2 Circle Taper Point , Monofilament Polypropylene With Peg Additive 2-0 90Cm 2Xv-20 , Blue 30Mm 1/2 Circle Taper Point , Monofilament Polypropylene With Peg Additive 3-0 90Cm 2Xvf-20 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polypropylene With Peg Additive 4-0 90Cm 2Xcv-23 , Blue 17Mm 1/2 Crcle Taper Cut , Monofilament Polypropylene With Peg Additive 5-0 90Cm 2Xcv-23 , Blue 17Mm 1/2 Crcle Taper Pont , Monofilament Polypropylene With Peg Additive 6-0 75Cm 2Xcv-22 , Blue 13Mm 1/2 Crcle Taper Pont , Monofilament Polypropylene With Peg Additive 7-0 60Cm 2Xkv-1 , Blue 9Mm 3/8 Crcle Tapercuttng , Mopping Three Bucket , Mother & Child Combination Band For Identification , Mtp Autoclavable Cannula With Adapter , Mtp Canula (Karmans) - All Sizes , Mucus Extractor Sterile , Mullin?S Sheath For Special Dilation 6Fr , Multi Side Port Catheter , Multifocal Iol , Multipurpose Catheter 4Fr , Multipurpose Catheter 5Fr , Multipurpose Catheter 6Fr , Multipurpose Catheter 7Fr , Multipurpose Catheter 8Fr , Multirate Elastomeric Disposable Infusion Pump , Multi-Vent Mask Pediatric, , Murcury Free Sphgnomanometer , Mv Set 100 Ml , Mvr 21G , N.G Tube No.6 , Nasal Haemostatic Sponge Pack (With Airway) 10 Inch , Nasal Haemostatic Sponge Pack (With Airway) 8 Inch , Nasal Haemostatic Sponge Pack With Out Airway 10 Inch , Nasal Haemostatic Sponge Pack With Out Airway 8 Inch , Nasal Oxygen Cannula { Set } , Twin Bore { Accessory For Compressed Air Breathing } All Size { Adult & Pediatric } ,Soft And Kink Resistant Pvc Tubing ,Tube Length 200 Cm , Nasal Oxygen Set, Twin Bore All Sizes Adult , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics , Nasal Pronge Child , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Nasogastric Tube No. 6 , Nebulization Mask Adult , Nebulization Mask Paediatric , Nebulizer Chamber & Neonatal Mask , Nebulizer Chamber (Large Jet Type) With Mask & 2 Mtr Long Multy Channel Tube , Nebulizer Chamber With T-Piece , Nebulizer System , Needle & Syringe Cum Hub Cutter (Size-800Ml) , Needle 23G(Sterile, Single Use, Disposable, As Per Bis) , Needle 26G Half Inch (Sterile, Single Use, Disposable, As Per Bis) , Needle Cutter , Needle Fitula , Needle Holder , Needle Surgical Suture , Nelaton Catheter Size 14 Fg , Nelton Catheter Size6-24 Fg , Neonatal Close Suction System 5,6,7 Fr , Neonatal High Flow Nasal Cannula Having 8 Litre Flow , Neonatal High Flow Nasal Cannulashould Able To Provide 8 Litre Flow. Should Have Soft Tip . , Neonatal Single Heated Wire Breathing System , Neonatal Single Heated Wire Breathing Systemwith Autofill Humidification Chambercomes In Sterile Pack And Ce Marked. Should Be Compatible With Our Existing Humidifier Bubble Cpap System With Nasal Cpap Kitshould Containneonatal 15Mm Inspiratory Limb Heated Wire 1.6M , New Born Pic Line No. 26 , New Born Pic Line No. 28 , Nih Catheter 4Fr , Nih Catheter 5Fr , Nih Catheter 6Fr , Nih Catheter 7Fr , Nih Catheter 8Fr , Nitrous Oxide Tail Pipe Copper , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Bipap With Vent , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Ventilator Without Vent , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Bipap With Vent , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Ventilator Without Vent , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support , No Knife Module , Non Absorbable 5 Mm Hernia Mesh Fixation Device , Non Absorbable Monofilament 3-0 Reverse Cutting 24Mm Needle , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2/0 1/2 Circle Taper Cut,17Mm Double Armed Needle,Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2-0 1/2 Circle Taper Cut,25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0(3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(1/2 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With Size 3/0 1/2 Circle Tapercut Double Needle 25Mm,Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0(1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Cir Tapercut Double Needle 17Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Circle Tapercut 13Mm Double Needle 70Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb Double Needle 17Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 10/0 (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 4/0 (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/ Blue Size 4/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilized Surical Needled Black Braided Silk With Needle 1/2 Circle Round Bodied 30 Mm Needle , Length 70 Cm Size 2-0 , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle,Length 90 Cm)Size 6/0 , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 4/0(1/2 Cir Rb Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 5/0 (1/2 Circle Cc 13Mm Needle, Suture Length Of 70Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 7/0 (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 8/0 (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) , Non Absorbable Surgical Suture,Sterilised Needled Polyamide Monofilament Black (Nylon)Size 5/0(3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 3-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 5-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 6-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Monofilament Polypropylene Blue 1/2 Circle Round Body 13 Mm Needle Length 75 Cm 6-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Monofilament Polypropylene Blue 1/2 Circle Round Body 13 Mm Needle Length 75 Cm 7-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 6Mm Length 70Cm 5-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 6Mm Length 70Cm3-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 6Mm Length 70Cm4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon)(3/8 Cir Micropoint Royund Body 6Mm Length 38 Cm)10-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon)(3/8 Cir Micropoint Royund Body 6Mm Length 38 Cm)9-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyglycaprone/ Polyglyconate Monofilament Sutures 1/2 Circle Oval Round Body Needle 26Mm Needle Length 70 Cm 5-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyglycaprone/ Polyglyconate Monofilament Sutures 1/2 Circle Oval Round Body Needle 26Mm Needle Length 70 Cm3-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyglycaprone/ Polyglyconate Monofilament Sutures 1/2 Circle Oval Round Body Needle 26Mm Needle Length 70 Cm4-0 , Non Return Valve (Brass) For Nitrous Oxide Manifold , Non Return Valve (Brass) For Oxygen , Non Woven Surgical Tape - 5 Meter , Non Woven Surgical Tape - 9 Meter , Nonabsorbable Helical Fastener 5Mm With 15 Fasteners , Nonabsorbable Helical Fastener 5Mm With 30 Fasteners , Nonabsorbable Polypropylene Light Weight Macroporous Mesh , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rb ½ Circle 30 Mm 90 Cm , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rb 3/8 Circle 16 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Tp , Non-Fibre Optic Single Use Adult Scope , Non-Fibre Optic Single Use Cysto Scope For Djr & Diagnostic Cystoscope , Non-Fibre Optic Single Use Large Scope , Non-Fibre Optic Single Use Paediatrics Scope , Nternal Mammary Catheter 4Fr , Nternal Mammary Catheter 5Fr , Nternal Mammary Catheter 6Fr , Nternal Mammary Catheter 7Fr , Nternal Mammary Catheter 8Fr , O Drapewith Iodine Adhesive , Oa Knee Support (Neoprene) Left Varus / Right Valgus , Oa Knee Support (Neoprene) Right Varus / Left Valgus , Offset Connector Cardio Sensor Electrodes Sizes Adult , Offset Connector Cardio Sensor Electrodes Sizes Neonatal , Offset Connector Cardio Sensor Electrodes Sizes Paediatrics , One Loop & Triple Loop Snare , Optically Guided Bladeless Trocar 12Mm Length 100Mm , Optically Guided Bladeless Trocar 12Mm Length 150Mm , Oro-Pharyngeal Airways , Ortho Stockinete 10 Mt. 125 , Ortho Stockinete 10 Mt. 50 , Ortho Stockinete 10 Mt. 75 , Ot Dress Disposable (Female/Male) , Ot Eye Towel Disposable Small/Medium/Large , Ot Gown Disposable Sterilized With Flap , Over-The-Ear Nasal Cannula 50 Cm Tubing , Oxipulse Meter , Oxygen Hood , Oxygen Mask (Adult) , Oxygen Mask (Pediatric) , Oxygen Mox Regulator With Bottle , Oxygen Regulator With Flow Meter And Pressur Meter , Oxygen Tail Pipe , Paed. Single Heated Wire Breathing System , Paediatric Endotracheal Tube Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Sizes Are 3Mm. , Paediatric Endotracheal Tube Sizes Are 5.5Mm. , Paediatric Foley Balloon Catheter , Paediatric Urine Collecting Bag - 200 Ml , Papain-Urea & Silk Protein Based Wound Debriding Ointment And Cream 25Gm , Papain-Urea & Silk Protein Based Wound Debriding Ointment And Cream 50Gm , Paper Adhesive Plaster 1 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 4 X 9.0 Mts Non Woven Adhesive Tape , Paraffin Gauze Dressing 20S Tin , Pardiatric Mask For Tracheostomy , Patient Indetification Band - Green, Blue, Red , Patient Plate Coutery Cord , Patient Pre Operative Skin Prepration Solution 26 Ml , Patient Suit (Summer) Disposable , Patient Suit (Winter) Disposable , Pcd Set Puncture Needle 18G 24Fr , Pct Kit With Griggs Forceps , Pct Kit Without Griggs Forceps , Pds Plus Pdp305h No.3 Violet Pds Plus Antibacterial Polydioxanone Suture Box, Size: 17 Mm , Pds Plus Pdp359t No. 1 Violet Pds Plus Antibacterial Polydioxanone Suture Box, Size: 40 Mm , Pediatric Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Pediatric Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Pediatric Nasal Cannula 7 Cm Star-Lumen Tubing , Pelvic Traction Belt , Pelvic Traction Kit , Pelvic Traction Kit With Weight Bag , Percutaneous Endoscopic Gastrostomy (Peg) 14Fr , Percutaneous Endoscopic Gastrostomy (Peg) 20Fr , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr , Percutaneous Gastrostomy Balloon , Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use)Sterile Disposable , Perfusion Set With Airway And Needle,(Adult Use) Sterile Disposable , Peripherally Inserted Central Line For High Flow/ Power Injection 4Fr Double , Peripherally Inserted Central Line For High Flow/ Power Injection 4Fr Single , Peripherally Inserted Central Line For High Flow/ Power Injection 5 Fr Double , Peripherally Inserted Central Line For High Flow/ Power Injection 5 Fr Single , Peripherally Inserted Central Line For High Flow/ Power Injection 5 Fr Triple , Pillow Rubberised Coir Foam Size 63.5 Cm X 41 Cm X 11.5 Cm With Cotton Cloth Cover (100 % Fiber) , Pillow Rubberised Coir Foam Size 63.5 Cm X 41 Cm X 11.5 Cm With Cotton Cloth Cover (Cotton) , Piston Teflon (Ptfe) (0.4Mm ) Diameter 4.25 Mm Length , Piston Teflon (Ptfe) (0.4Mm ) Diameter 4.5 Mm Length , Piston Teflon (Ptfe) (0.4Mm ) Diameter 4.75 Mm Length , Piston Teflon (Ptfe) (0.4Mm ) Diameter 5 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter 4.25 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter 4.5 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter 4.75 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter 5 Mm Length , Piston Titanium - Teflon Mix (0.4Mm ) Diameter 4.25 Mm Length , Piston Titanium - Teflon Mix (0.4Mm ) Diameter 4.5 Mm Length , Piston Titanium - Teflon Mix (0.4Mm ) Diameter 4.75 Mm Length , Piston Titanium - Teflon Mix (0.4Mm ) Diameter 5 Mm Length , Piston Titanium - Teflon Mix (0.6Mm) Diameter 4.25 Mm Length , Piston Titanium - Teflon Mix (0.6Mm) Diameter 4.5 Mm Length , Piston Titanium - Teflon Mix (0.6Mm) Diameter 4.75 Mm Length , Piston Titanium - Teflon Mix (0.6Mm) Diameter 5 Mm Length , Piston Titanium (0.4Mm ) Diameter 4.25 Mm Length , Piston Titanium (0.4Mm ) Diameter 4.5 Mm Length , Piston Titanium (0.4Mm) Diameter 4.75 Mm Length , Piston Titanium (0.4Mm) Diameter 5 Mm Length , Piston Titanium (0.6Mm) Diameter 4.25 Mm Length , Piston Titanium (0.6Mm) Diameter 4.5 Mm Length , Piston Titanium (0.6Mm) Diameter 4.75 Mm Length , Piston Titanium (0.6Mm) Diameter 5 Mm Length , Plain Vial With Sticker &Cap , Plaster Of Paris Bandage 10Cm X 2.7Mts , Plaster Of Paris Bandage 15Cm X 2.7 Mts/Roll , Plastic Long Gloves , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates - 2 Mm Thickness (1*1 ) Hole , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates - 2 Mm Thickness (1*2 ) Hole , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates - 2 Mm Thickness (2*2 ) Hole , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (1.5 Mm ) , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (2 Mm ) , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (2.5 Mm ) , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (3 Mm ) , Pod Crutch (22 Mm) , Pod Quadri (15 Mm) , Pod Walking Stick (19Mm) , Poly Safety Adva. I.V Cannula With Inj Port Size 14,16,18,20,22G , Polydioxanone Monofilament (Voilet), 5-0, 70 Cm 1/2 Circle Round Body Double Needle 13 Mm , Polydioxanone Voilet Monofilament, 3-0, 70 Cm, 1/2 Circle Taper Point Rb-1, 17Mm, , Polydioxanone Voilet Monofilament, 4-0, 70 Cm, 1/2 Circle Taper Point Rb-1, 17Mm, , Polyester Ethylene Terephthalate Nonabsorbable Surgical Suture Polyester Suture Is A Nonabsorbable,Braided,Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) , Polyglactin 5-0 Cc 3/8 Circle 16 Mm 45 Cm , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm , Polyglactin 6-0 Micro Point ¼ Circle 8 Mm 45 Cm , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm , Polyglactin-910, Braided Coated With Antibacterial 2/0, 70 Cm Undyed With ½ Circle 25 Mm Rb , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle 26 Mm , Polypropylene Blue Monofilament, 3-0, 90 Cm 1/2 Circle Round Body Double Needle 26 Mm , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament, 5-0, 90 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle 13 Mm , Polypropylene Blue Monofilament,No. 7-0, 60 Cm 3/8 Circle Round Body, Taper Point Double Needle 9 Mm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polythine/Plastic Gloves Disposable All Size , Post Operative Surgical Cover Dressings Hydrofiber Dressings 9X25 Cm , Post Operative Surgical Cover Dressings Hydrofiber Dressings 9X30cm , Post Operative Surgical Cover Dressings Hydrofiber Dressings 9X35 Cm , Pouch Arm Sling(Tropical) , Pouch Arm Sling (Baggy) , Pouch Arm Sling (Oxypore) , Powered Circular Stapler 29 Mm , Powered Circular Stapler 31Mm , Pre-Formed Sga With Gastric Access & Intubation Sizes 1 , Pre-Formed Sga With Gastric Access & Intubation Sizes 1.5 , Pre-Formed Sga With Gastric Access & Intubation Sizes 2 , Pre-Formed Sga With Gastric Access & Intubation Sizes 2.5 , Pre-Formed Sga With Gastric Access & Intubation Sizes 3 , Pre-Formed Sga With Gastric Access & Intubation Sizes 4 , Pre-Formed Sga With Gastric Access & Intubation Sizes 5 , Pre-Formed Sga With Gastric Access & Intubation Sizes 6 , Prepratery Razor-Single Edge Comb Style-Individualpacking , Pressure Monitoring Line , Pressure Monitoring Line / High Pressure Extension Line , Pressure Monitoring Line High 25,50,100,150,200Cms , Pressure Monitoring Line Low 25,50,100,150,200Cms , Prolene Soft , Prox Muti Dir 35 Pin Stapler , Ptca Kit , Ptfe Coated Diagnostic 0.032 Inch Guide Wire (Exchange Length, Extra Stiff Shaft Strength)-Amplatz Type , Ptfe Coated Diagnostic 0.032 Inch Guide Wire (Exchange Length, Extra Stiff Shaft Strength)-Amplatz Type , Ptfe Coated Diagnostic 0.032 Inch Guide Wire (Exchange Length, Extra Stiff Shaft Strength)-Amplatz Type , Ptfe Coated Diagnostic Guide Wire (Exchange Length, Regular Stiffness) 0.025, Inches , Ptfe Coated Diagnostic Guide Wire (Exchange Length, Regular Stiffness) 0.032 Inches , Ptfe Coated Diagnostic Guide Wire (Exchange Length, Regular Stiffness) 0.035Inches , Ptfe Coated Diagnostic Guide Wire (Exchange Length, Regular Stiffness) 0.038 Inches , Ptfe Coated Diagnostic Guide Wire (Regular Length, Regular Stiffness) 0.025 Inches Size , Ptfe Coated Diagnostic Guide Wire (Regular Length, Regular Stiffness) 0.032 Inches Size , Ptfe Coated Diagnostic Guide Wire (Regular Length, Regular Stiffness) 0.035 Inches Size , Ptfe Coated Diagnostic Guide Wire (Regular Length, Regular Stiffness) 0.038 Inches Size , Pur-Xro Catheter 20 Cm , Pur-Xro Catheter 30 Cm , R.O.M. Knee Brace , Radial Band Radial Hemostatis Band In 24 Cm , Radial Band Radial Hemostatis Band In 29 Cm , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.025 Inches , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.025 Inches , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.032 Inches , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.032 Inches , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.035Inches , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.038 Inches , Radiofocus Miniplastic Guidewire (Regular Stiffness) 0.038 Inches , Rebreathing Bag 1.5 Ltr. , Rebreathing Bag 1/2 Litre, 2 Litre , Rebreathing Bag 1Ltr. , Regulator With Pressure And Flowmeter , Reinforced Et Tube - Cuffed 5 - 10 Mm , Reloads - 100 Mm - Blue , Reloads - 100 Mm - Green , Reloads - 55 Mm - Blue , Reloads - 55 Mm - Green , Reloads - 55 Mm - Universal , Reloads - 75 Mm - Blue , Reloads - 75 Mm - Green , Reloads - 75 Mm - Universal , Reloads For Tlh30 , Reloads For Tlh90 , Reloads For Tlv30 , Reloads For Tsw35/Tsb35-Blue , Reloads For Tsw35/Tsb35-White , Reloads For Tx30b/Tx30g-Blue , Reloads For Tx30b/Tx30g-Green , Reloads For Tx30v , Rem And Non-Rem Single Use, Corded Patient Return Electrodes , Renal Double Curve Catheter , Reusable Anaesthetia Face Mask Fo Silicone Size 0 , Reusable Anaesthetia Face Mask Fo Silicone Size 1 , Reusable Anaesthetia Face Mask Fo Silicone Size 2 , Reusable Anaesthetia Face Mask Fo Silicone Size 3 , Reusable Anaesthetia Face Mask Fo Silicone Size 4 , Reusable Anaesthetia Face Mask Fo Silicone Size 5 , Reusable Anaesthetia Face Masksholud Be Silicone Autoclavable & Pure Transparent. Ce Markedand Size Also Be Mention In Product . Size 0,1,2,3 , Reverse Berman Catheter 4 French , Reverse Berman Catheter 5 French , Reverse Berman Catheter 6 French , Reverse Berman Catheter 7 French , Rhinolaryngo Single Patient Use Invtervention Scope , Rhinolaryngo Single Patient Use Slim Scope , Rib Belt , Ring Biliary Catheter Usa/Fda/Ce Approved Catheter 8.5 F , Room Thermometer , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large , Rubber Examination Gloves, Non-Sterile, Extra Small , Rubber Examination Gloves,Size Medium , Rubber Examination Gloves,Size Small , Ryles Tube / Nasogastric Tube Size: 10 , Ryles Tube / Nasogastric Tube Size: 12 , Ryles Tube / Nasogastric Tube Size: 16 , Ryles Tube / Nasogastric Tube Size: 18 , Ryles Tube / Nasogastric Tube Size:14 , Ryles Tube 6No , Ryles Tube 8No , Sanitary Napkin Beltless , Sanitary Napkin Beltless With Wings , Sanitary Napkins Beltless In Pulp Cotton (1X10) , Sanitary Pad (10X1)Delivery Use , Sanitary Pads Belt Type , Scalp Vein Set (Disposable) Size 18G , Scalp Vein Set (Disposable) Size 20G , Scalp Vein Set (Disposable) Size 22G , Scalp Vein Set (Disposable) Size 24 G , Scissiorsstraight (Ss) , Scissiors Curved (Ss) , Scissor (Dissecting) 7” , Scissor (Fine) Metzenlaum 7” (Curved) , Scissor Metzenlaum (Straight) 7” , Scleral Fixiated Intraoccular Lense , Self Adherent Moist Wound Dressing 10 Cms X 10 Cms , Sharp Conatiner 10 Lat. Blue , Sharp Conatiner 10 Lat. White , Sharp Conatiner 5 Lat. Blue , Sharp Conatiner 5 Lat. White , Sharp Safety Box & Conatiner 20 Lat. Blue , Sharp Safety Box & Conatiner 20 Lat. White , Sharp Safety Box & Conatiner 800Ml White , Shepherd?S Hook Catheter , Shoe Cover Disposable , Shoulder Support (Neoprene) , Sialestic Sheet 55*75 Mm And Thickness 0.5 Mm , Silicon Mask , Silicone Foley Balloon Catheter , Silicone Foleys Catheter Sizes - 10Fr , Silicone Foleys Catheter Sizes - 12Fr , Silicone Foleys Catheter Sizes - 14Fr , Silicone Foleys Catheter Sizes - 16Fr , Silicone Foleys Catheter Sizes - 18Fr , Silicone Foleys Catheter Sizes - 20Fr , Silicone Foleys Catheter Sizes - 8Fr , Silicone Manual Resuscitator Adult , Silicone Manual Resuscitator Child , Silicone Pre-Formed Sga Sizes 1 , Silicone Pre-Formed Sga Sizes 1.5 , Silicone Pre-Formed Sga Sizes 2 , Silicone Pre-Formed Sga Sizes 2.5 , Silicone Pre-Formed Sga Sizes 3 , Silicone Pre-Formed Sga Sizes 4 , Silicone Pre-Formed Sga Sizes 5 , Silicone Pre-Formed Sga Sizes 6 , Silicone Rod For Ptosis Repair , Silk Protein & Antimicrobial Nanosilver Based Sterile Surgical Pu Foam Dressing , Silk Protein & Antimicrobial Nanosilver Based Sterile Surgical Wound Dressing Sheet , Silk Protein & Antimicrobial Silver Based Sterile Surgical Mesh Wound Dressing , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Particle Wound Dressing 10Ml , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Particle Wound Dressing 5Ml , Silk Protein And Antimicrobial Nanosilver Impregnated Non-Adherent Leno Gauze Sterile Surgical Wound Dressing 10*10Cm , Silk Protein And Antimicrobial Nanosilver Impregnated Non-Adherent Leno Gauze Sterile Surgical Wound Dressing 10*25Cm , Silk Protein And Nanosilver Based Microbicidal Sterile Surgical Wound Dressing , Silk Protein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management 10*20Cm , Silk Protein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management 10*21.5Cm , Silk Protein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management 10*25Cm , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver , Silk Protein Based Non-Woven Backed With Pad & Self Adhesive Border, Water-Repellent Sterile Surgical Dressing 10*20Cm, , Silk Protein Based Non-Woven Backed With Pad & Self Adhesive Border, Water-Repellent Sterile Surgical Dressing 10*25Cm , Silk Protein Based Non-Woven Backed With Pad & Self Adhesive Border, Water-Repellent Sterile Surgical Dressing 15*15Cm , Silk Protein Based Sterile Surgical Particle Wound Dressing , Silk Protein Based Sterile Surgical Pu Foam Dressing Non Adhesive , Silk Protein Based Sterile Surgical Wound Dressing Sheet , Silk Protein Based Sterile Surgical Wound Dressing Sprinkling Powder Bottle , Silk Protein Derived Sterile Surgical Meshed Wound Dressing , Silk Protein Impregnated Non-Adherent Leno Gauze Sterile Primary Surgical Wound Dressing 10*10Cm , Silk Protein Impregnated Non-Adherent Leno Gauze Sterile Primary Surgical Wound Dressing 10*25Cm , Silk Protein, Asiaticoside And Povidone Iodine Based Broad Spectrum Topical Antiseptic And Antimicrobial Wound Healing Ointment 25Gm , Silk Protein, Asiaticoside And Povidone Iodine Based Broad Spectrum Topical Antiseptic And Antimicrobial Wound Healing Ointment 50Gm , Silk Protein, Nanosilver And Asiaticoside Based Pu Film Backed With Pad & Self Adhesive Border, Water-Proof Sterile Surgical Dressing 10*25Cm , Silk Protein, Nanosilver And Asiaticoside Based Pu Film Backed With Pad & Self Adhesive Border, Water-Proof Sterile Surgical Dressing 9*21.5Cm , Silk Reel 1-0 , Silk Reel 2-0 , Silk Reel 3-0 , Silk Reel 4-0 , Simmons/ Sidewinder Catheter , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Adult) , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Neonatal) , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Paed) , Single Rate Elastomeric Disposable Infusion Pump , Skin Grafting Knife Blade (Sterile) , Skin Marker Pen – Sterile , Skin Shaving Blade , Skin Stapler , Skin Stapler And Remover , Skin Traction Set (Puf Liner) , Sodalime5 Kg , Sodium Hypochlorite 5% (1X5 Liter) , Sp O2 Probe (For Adults) , Special Judkins Coronary Catheter 4 French , Special Judkins Coronary Catheter 5 French , Special Judkins Coronary Catheter 6 French , Speech Prosthesis For Laryngectomy 17Fr (10 Mm) , Speech Prosthesis For Laryngectomy 17Fr (12.5 Mm) , Speech Prosthesis For Laryngectomy 17Fr (4 Mm) , Speech Prosthesis For Laryngectomy 17Fr (6 Mm) , Speech Prosthesis For Laryngectomy 17Fr (8 Mm) , Speech Prosthesis For Laryngectomy 20Fr (10 Mm) , Speech Prosthesis For Laryngectomy 20Fr (12.5 Mm) , Speech Prosthesis For Laryngectomy 20Fr (4 Mm) , Speech Prosthesis For Laryngectomy 20Fr (6 Mm) , Speech Prosthesis For Laryngectomy 20Fr (8 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (10 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (12.5 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (4 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (8 Mm) , Spinal Needle No. 20, 23, 24, & All Size , Spinal Sheet 90X145 Cm Disposable Sterilized , Sponge 12 X 12 Inch With Tie 6 Inch , Sponge 15 X 15 Inch With Tie 6 Inch , Spongostan Anal 0.3 X 8 Cm , Spongostan Film 20 X 7 X 0.05 Cm , Spongostan Special 7 X 5 X 0.1 Cm , Standard Pama Ac Intra Ocular Lenses 11 To 17.5 , Standard Pama Ac Intra Ocular Lenses 18 To 24 , Standard Pama Ac Intra Ocular Lenses 24.5 To 28.5 , Standard Pama Pc Intra Ocular Lenses 11 To 17.5 , Standard Pama Pc Intra Ocular Lenses 18 To 24 , Standard Pama Pc Intra Ocular Lenses 24.5 To 28.5 , Steerable Introducer Sheeths 10F , Steerable Introducer Sheeths 11F , Steerable Introducer Sheeths 12F , Steerable Introducer Sheeths 5F , Steerable Introducer Sheeths 6F , Steerable Introducer Sheeths 7F , Steerable Introducer Sheeths 8F , Steerable Introducer Sheeths 9F , Sterile Bone Wax 2.5 Gm , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port Size 24G , Sterile Disposable (Single Use) Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G , Sterile Disposable (Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.) Size 18G , Sterile Disposable Hypodermic Needle No. 18X1½ , Sterile Disposable Hypodermic Needle No. 21X1½ , Sterile Disposable Hypodermic Needle No. 23X1½ , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1/2 Inch , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1/2 Inch , Sterile Disposable Syringe 1Ml 100 Parts , Sterile Hypodermic Syringe 2Ml , Sterile Hypodermic Syringe 5Ml , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml , Sterile Oxidized Regenerated Cellulose Hemostating Agent , Sterile Post Op Dresssing , Sterile Post Op Dresssing 20Cmx10cm , Sterile Post Op Dresssing 25Cmx10cm , Sterile Post Op Dresssing 30Cmx10cm , Sterile Post Op Dresssing 35Cmx10cm , Sterile Post Op Dresssing 6Cmx8.3Cm , Sterile Post Op Dresssing For Compression , Sterile Self Adherent With Lipido Colloid Technology 10X25cm , Sterile Self Adherent With Lipido Colloid Technology 13X13cm , Sterile Self Adherent With Lipido Colloid Technology 15X20cm , Sterile Self Adherent With Lipido Colloid Technology 20X20cm, , Sterile Self Adherent With Lipido Colloid Technology 6.5X10cm, , Sterile Self Adherent With Lipido Colloid Technology 8 X15cm, , Sterile Self Adherent With Lipido Colloid Technology 8X8cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm , Sterillium 500Ml , Stetho Scope (Adult & Pead.) , Stich Bonded Hydrofiber Burns Dresssings In Gel Form 23 X 100 Cms , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wire 4 French , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wire 5 French , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wire 6 French , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wire 7 French , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wire 8 French , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wire 9 French , Straight Reinforced Sheath With Hydrophilic Coating 10 French , Straight Reinforced Sheath With Hydrophilic Coating 11 French , Straight Reinforced Sheath With Hydrophilic Coating 12 French , Straight Reinforced Sheath With Hydrophilic Coating 6 French , Straight Reinforced Sheath With Hydrophilic Coating 7 French , Straight Reinforced Sheath With Hydrophilic Coating 8 French , Straight Reinforced Sheath With Hydrophilic Coating 9 French , Strilizer 17 , Sub-Glottic Tube Taper Guard Evac: Sizes 6.5Mm , Sub-Glottic Tube Taper Guard Evac: Sizes 6Mm , Sub-Glottic Tube Taper Guard Evac: Sizes 7.5Mm , Sub-Glottic Tube Taper Guard Evac: Sizes 7Mm , Sub-Glottic Tube Taper Guard Evac: Sizes 8.5Mm , Sub-Glottic Tube Taper Guard Evac: Sizes 8Mm , Sub-Glottic Tube Taper Guard Evac: Sizes 9Mm , Suction Catheter, Sterile. Size: F G-10 , Suction Catheter, Sterile. Size: F G-12 , Suction Catheter, Sterile. Size: F G-14 , Suction Catheter, Sterile. Size: F G-16 , Suction Catheter, Sterile. Size: F G-18 , Suction Catheter, Sterile. Size: F G-20 , Suction Catheter, Sterile. Size: F G-22 , Suction Catheter, Sterile. Size: F G-6 , Suction Catheter, Sterile. Size: F G-8 , Suction Catheter, Sterile.Size: Fg 5 , Suction Jar , Suction Lrrigation Set. , Suction Set Within In Built On Off Switch , Sulu Stepped Cartridges 10Mm , Sulu Stepped Cartridges 8Mm , Surgeon Gown - Splash Resistant & Abrasion Water Repellant Fabric Sterile , Surgical Blade Sterile, Size 11 , Surgical Blade Sterile, Size 15 , Surgical Blade Sterile, Size 22 , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 , Surgical Cap Disposable (For Surgeons) , Surgical Cap, Disposable (For Nurses) , Surgical Eye Drape , Surgical Gloves (Gama Sterilized) Varoius Size(6-8) , Surgical Gloves 6.5 Puncture Indicator Technology , Surgical Gloves 7 Puncture Indicator Technology , Surgical Gloves 7.5 Puncture Indicator Technology , Surgicel 2 X 14 , Surgicel 2 X 3 , Surgicel 4 X 8 , Surgicel Fibrillar 1 X 2 , Surgicel Fibrillar 2 X 4 , Surgicel Fibrillar 4 X 4 , Surgicel Nu-Knit 1 X 3.5 , Surgicel Nu-Knit 3 X 4 , Surgicel Nu-Knit 6 X 9 , Surgicel Plain 2 X 14 , Suthi , Swan Ganz Catheter 6F , Swan Ganz Catheter 7F , Swine Flu Protection Kit , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Tp, , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Tp , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Tp , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Tp , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm , Syringe 1 Ml With Needle 24 G(Sterile, Single Use, Disposable) , Syringe 10 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable , Syringe 2 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable , Syringe 20 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable , Syringe 3 Ml With Needle 24 G(Sterile, Single Use, Disposable) , Syringe 5 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable , Tacker , Takker Absorbent , Takker Non- Absorbent , Taylors Brace Short / Long , Telescope 5Mm , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir,Tapercut, 26 Mm Needle With Self Retaining System , Tennis Elbow Support , Thermal Scanningthermometer (Infrared) , Thoracic Drainage Catheter With Trocar , Three Ball Breathing Exerciser-With Different Color Balls , Three Dimensional Monofilament Polyester Marking Size 12 Cm Circular , Three Dimensional Monofilament Polyester Marking Size 15 Cm Circular , Three Dimensional Monofilament Polyester Marking Size 20X15 Cm Circular , Thumb Spica Splint , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm L Plate Right And Left Side 6 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm L Plate Right And Left Side 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm L Plate Right And Left Side 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm L Plate Right And Left Side 5 Hole , Titanium Maxillofacial Fracture Fixation Screws 1.5 Mm 6 Hole , Titanium Maxillofacial Fracture Fixation Screws 2.0 Mm 6 Mm , Titanium Maxillofacial Fracture Fixation Screws 2.0 Mm 8 Mm , Titanium Maxillofacial Fracture Fixation Screws 2.5 Mm 10 Mm , Titanium Maxillofacial Fracture Fixation Screws 2.5 Mm 6 Mm , Titanium Maxillofacial Fracture Fixation Screws 2.5 Mm 8 Mm , Titanium Total Ossocular Replacement Prosthesis (Torp) , Titanium Total Ossocular Replacement Prosthesis (Torp) , Toe Separator Silicon (Pair) , Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load-Release Mechanism , Tourniquet , Towelturkish Dyed Medium Size (24X 48 ) , Towelturkish Full Size (30X 60) , Tracheostomy Hme: , Tracheostomy Tube (Cuffed) - 100% Silicon , Tracheostomy Tube (Pvc Material) Double Lumen 3.5 -8Mm All Size , Tracheostomy Tube (Pvc Material) Fenestrated 3.5 -8Mm All Size , Tracheostomy Tube (Pvc), Cuffed - All Sizes , Tracheostomy Tube {Pvc}, Cuffed, Sterile, Single Use .All Size. ,Soft Flexible Flange At For Easy Fixation ,15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction ,Balloon With Non Return Valve , Tracheostomy Tube {Pvc}, Plain ,Sterile, Single Use All Size ,Soft Flexible Flange At For Easy Fixation ,15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction , Tracheostomy Tube Cuffed , Tracheostomy Tube Disposable With Cuff , Tracheostomy Tube, Plain - All Sizes , Traction Pulley Bracket , Traction Weight Bag , Tran Jugular Intrahepatic Porto Sytemic , Trans Radial Introducer Sheeths 4F , Trans Radial Introducer Sheeths 5F , Trans Radial Introducer Sheeths 6F , Transparent Dressing With Absorbent Pad Quotted With Dacc 10X25 , Transparent Dressing With Absorbent Pad Quotted With Dacc 10X30 , Transparent Dressing With Absorbent Pad Quotted With Dacc 7.2X5 , Transperant Surgical Wound Dressing Size- 10X15 , Transperant Surgical Wound Dressing Size- 10X30 , Transperant Surgical Wound Dressing Size- 10X40 , Transperant Surgical Wound Dressing Size- 20X25 , Transperant Surgical Wound Dressing Size- 6X 7 , Transradial Diagnostic Coronary Catheter Tiger Type 4Fr , Transradial Diagnostic Coronary Catheter Tiger Type 5Fr , Transradial Diagnostic Coronary Catheter Tiger Type 6Fr , Transradial Diagnostic Coronary Catheter Tiger Type 7Fr , Transradial Diagnostic Coronary Catheter Tiger Type 8Fr , Triple Hydrocolloid Skin Barrier Where No Cutting 45Mm, , Triple Hydrocolloid Skin Barrier Where No Cutting 57Mm, , Triple Hydrocolloid Skin Barrier Where No Cutting 70Mm , Trocar Cannula 11 Mm , Trocar Cannula 6 Mm , Trocar Washer 10 Mm , Trocar Washer 5 Mm , Tt Tube With Yellow Sub Glotic Suction Line , T-Tube (Silicone) 9 Mm Length , T-Tube 12 , Tummy Trimmer/ Abdominal Belt 8 , Tur Set , Turp Set , Twin Bore With 2 Mtr. Long Tube For Nasal Oxygen - Adult , Twin Bore With 2 Mtr. Long Tube For Nasal Oxygen - Child, Infant , Typan Blue (Dye) , U Hip Drape , U Shoulder Drape , Ultra Clip Disposable Breast Tissue Marker , Ultrasorbs Ap Disposable Drypads , Umbilical Catheter For New Born, All Sizes - , Umbilical Cord Clamp , Umbillical Canulla No. 5, 6, 8 & Others , Under Pad , Universal Linear Cutter Cartridge 55Mm , Universal Linear Cutter Cartridge 75Mm , Universal Shoulder Immobiliser , Urethral Catheter , Urethral Catheter 90 (Fg-14) Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Urine Albumin Sugar Strip , Urine Bag With 150 Cm Long Tubing Large Bore , Urine Collecting Bag For New Born / Paediatric Urine Collecting Bag Should Have Suitability For Both Male And Female Patients ,Capacity 100 Ml ,Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml , Urine Collecting Bag, Disposable 2000 Ml , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Urine Container, Sterile70ml , Urine Container, Sterile 30 Ml , Urometer , Vaccum Suction Set, 2.5 Meter Length , Varicose Vein Stockings All Size , Varied Staple Height Reloads/Cartridges For 60 Mm Gia , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments , Varied Staple Height Reloads/Cartridges For 80 Mm Gia , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm (Longline Iv) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm (Longline Iv) , Venaseal Closure System , Ventilator Circuit - Sterile , Venturi Mask , Veress Needle , Vertebral Catheter , Vibratory Pep Therapy Device , Volumetric Incentive Spirometer (Adult) , Volumetric Incentive Spirometer (Pediatric) , Vtk Diagnostic Catheter , Walker Invalids - Front Wheels - All , Walker Invalids Reciprocating - All Pods , Walking Stick (L Type) , Walking Stick (Soft Top Handle) , Walking Stick Quadripod , Wash Bottle 500 Ml , Water Mattress , Weight Cuff1 Gk , Weight Cuff1/2Kg , Weight Cuff2 Kg , Weight Machine :- Digital Neonatal , Weight Machine Digital :- Pediatric & Adult , Weight Machine Manual Adult , Wound Drainage Vacuum Set , Wound Protector Large In Size 9-14 Cm Usfda Approved , Wound Protector Medium 5-9 Cm , Wound Protector Small 2.5-6 Cm Usfda Approved , Wrist & Forearm Splint Right/Left , Wrist Brace With Double Lock , Wrist Brace With Thumb (Neoprene) , Wrist Wrap (Neoprene) , Xcel Bladeless Trocar 12X100 , Xcel Bladeless Trocar 12X150 , Xcel Bladeless Trocar 5X100 , Xcel Bladeless Trocar 5X150 , Yankaur Suction With 2.5 Mtr. Long Tube (Suction Catheter)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 14
40.
Tourism #10094105 Price Bid
Supplying Of Crockery ( Bone China And Stoneware Both ) And Glassware Items For Hptdc Central Store Kufri Distt Shimla Supplying Of Crockery ( Bone China And Stoneware Both ) And Glassware Items For Hptdc Central Store Kufri Distt Shimla , Crockery Items ( Stoneware ) Supplying Of Full Plate ( Round 11” ) , Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Baked 3 Times On An Average At 1100°C. , Supplying Of Half Plate ( Round 9” ) , Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Quarter Plate ( Round 7” ) , Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Tea Cup ( 200Ml ) , Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Tea Soucer, Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Soup Bowls ( 200Ml ) , Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Bud Vase, Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Candle Stand, Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Supplying Of Ash Tray, Alongwith Brand Name, With Himachali Patti On Top With Hptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc Stoneware Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C. , Crockery Items ( Bone China ) Supplying Of Round Georgian Full Plate-11”, Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Of Round Georgianhalf Plate-9”, Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Of Round Georgianquarter Plate-7”, Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc , Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Oftea Cup ( 200Ml ) , Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc , Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Ofsaucer , Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc , Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Ofsoup Bowls ( 200Ml ) , Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Ofcandle Stand, Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc , Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Ofbud Vase, Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Supplying Ofash Tray, Alongwith Brand Name, With Himachali Patti On Top Withhptdc Monogram, Manufacturing Year On Bottom With Monogram As Per The Prevailing Pattern Of Hptdc, Bone Contents Should Be More Than 50% And Processed And Backed 3 Times On An Average At 1100°C And Crockery Should Be Silky, Transparent And Creamy In Texture. , Glassware Itemssupplying Of High Ball Glass ( 280 Ml ) With Rim Top And Hptdc Monogram, Alongwith Brand Name , Supplying Of Juice Glass ( 150 Ml ) With Rim Top And Monogram, Alongwith Brand Name , Supplying Of Water Goblet ( 280 Ml ) With Rim Top And Hptdc Monogram, Alongwith Brand Name , Supplying Ofbeer Goblet ( 350Ml ) With Rim Top And Hptdc Monogram, Alongwith Brand Name , Supplying Ofbeer Mugs ( 350Ml ) With Rim Top And Hptdc Monogram, Alongwith Brand Name , Supplying Ofwhisky Glass ( 280 Ml ) ( Shafli Old Fashion ) With Rim Top And Hptdc Monogram, Alongwith Brand Name , Supplying Ofice Cream Cup ( 160Ml ) With Hptdc Monogram, Alongwith Brand Name
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Himachal Pradesh View Result →
41.
Housing Urban and Rular Development #10088182 Price Bid
Construction Of250 Capacity Auditorium For U.P. Sanskrit Sansthan At New Hyderabad Lucknow. ( Balance Work ) Balance Work Supply Of Material And Labour Construction Of Auditorium Building Of U.P. Sanskrit Sansthan New Hydrabad, Lucknow. ( Balance Work ) Labour Work 2 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specifiedgrade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures inrecommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durabilityas per direction of the Engineer - in - charge.All works up to Plinth level.In beam,column,lintl,slab etc 3 Suspended floors, roofs, landings, balconies and access platform 4 Lintels, beams, plinth beams, girders, bressumers and cantilevers 5 Columns, Pillars, Piers, Abutments, Posts and Struts 6 Edges of slabs and breaks in floors and walls Under 20 cm wide 7 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) 8 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (labour only) 9 Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure includingalllabour and T & P etc. required for proper completion of work. (Labour only) 10 Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including , labour and T & P etc. required for proper completion of work. (Labour only) 11 10mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortorincluding , Labour T.&.P. complete of work .(Labour only) 12 12/15mm wall plaster 1:6 cement :coarse sand with groove at junction includinglabour T&P etc. (Labour only) 13 Providing & Laying Polished Vitrified tiles in Floor/Dado different sizes (thickness to be specified by the manufacturer) with water absorptions less than n 0.08% and conforming IS 15622 of approved make in all Colours and shades, laid on 20mm. Thick 1:4 (1cement : 4 Coarse sand) Including grouting the joints with white cement and matching pigment etc. Complete.Size 600*600 mm.i/c all material labour T&P complete 14 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm i/c all material labour T&P complete 15 Same as above but for floor 16 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.Granite work (paid for double moulding only) 17 Providing and fixing of 2mm. Thick Section Powder Coated aluminium work for Window / Door with extruded built up standard tubular sections and other sections of approved makefixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete: Window 18 S/L Door 19 D/L Door 20 Cement washing (white cement) one coat onwall or ceiling whereever required 21 Providing and Fixing tiled false Ceiling of specified materials of Size 595x595mm in true horizontal level , suspended on inter locking metal grid of hot dipped galvanized steel sections (Galvanized @ 120 grams/sqm both side inclusive ) consisting of main T runner wqith suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet , spaced at 1200 mm center to center and cross T of size 24x25mm made of 0.30(Model-Classic RH95 Armstrong) 22 Supply, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by scroll compressor controlled by inverter complete with indoor and outdoor units with individual/group wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge ofrefrigerant gas (R-410A) & oil, with initial topup of refrigrant to run the machine satisfactory .Machine will be operate upto 52C ambient temperature. Each outdoor Unit should have atleast 2 compressor and both should DC inverter end. internal control cabling and fittings etc. as per details given in specifications and having followingitems. The out door unitsshall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V,50 Hz AC supply.Make -voltas ,Hitachi,bluestarOutdoor Unit 24 HPHeat Pump Type 23 Supply installation testing and commissioning of Interconnectingrefrigerantpipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation betweeneach set ofindoor &outdoor units as perspecifications,all pipinginsidethe roomshallbe properlysupportedwithMShanger.Make:- Mandev, Maxflow ,rajco,mettube,hariom (a) 41.2 mm dia 19 mm thk. Insulation (B)34.9 mm dia 19 mm thk. Insulation (C)28.6 mm día 19 mm thk. Insulation (D) 22.2 mm dia 19 mm thk. Insulation (E) 19.04 mm dia 19 mm thk. Insulation (F)15.9 mm dia 19 mm thk. Insulation (G)12.7 mm dia 13 mm thk. Insulation (H)9.5 mm dia 13 mm thk. Insulation (I) 6.4 mm dia 13 mm thk. Insulation 24 Supply & Fixing of suitable G.I Slotted angle channnel with G.I. Threaded G.I. Hanger for Copper pipe and cable tray, G.I. nut bilts etc. 25 Providing and fixing rigid PVC piping complete withfittings, supportsas per specifications anddulyinsulatedwith6 mmthick closed cell nitrile rubber insulation. Make:- Finolex,Supreme, Kissan ,Astral25mm dia 26 32 mm dia 27 50 mm dia 28 Supply & hand fabrication Ducts made out of G.I. sheets of Complete job as per detailed drawing.(sail/tata/zindal)24 Guage 29 22 Guage 30 20 Guage 31 Supply & Installation of M.S angle G.I. support , G.I. threaded rod, nut,bolt etc 32 Supply & Pasting Of 12MM Thick Nitrile/XLPE Rubber Insulation 33 Supply and pasting of Accoustic Linning 34 Supply & Installation of Aluminum Powder coated 6/8 Supply/Return air Grill/Diffuser 35 CANVASS CONNECTION 36 Materials 37 Course sand (Hameerpur) 38 Brick 39 Cement PPC (packed in 50 kg bag) make- Birla,Prism, ACC, Mycem,J.P. 40 TMT steel MS round bar confirming FE-500 I.S.I.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
44.
Science and Technology #10055799 Price Bid
Tender For Renovation / Refurbishment / Upgradation Works In Health Centre At Csir-Cecri, Karaikudi.; 1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2 Of area 3 sq. metres and below 3 Of area beyond 3 sq. metres 4 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. 5 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 6 Of sectional area 40 square centimetres and above 7 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 8 For thickness of tiles 10 mm to 25 mm 9 Dismantling the existing old damaged wash basin & sink including necessary fittings as directed by the Engineer-in-charge. 10 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. 11 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 12 G.S. Sheet 13 Demolishingbrickworkmanually/bymechanicalmeansincluding stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 14 In cement mortar 15 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 16 Closing the minor holes upto 0.10sqm area in existing mansonry wallls with necessary plastering and neat finishing as directed by the Engineer-in-charge 17 Removing old unnecessary clamps , angles ,curtain rods and other unwanted minor parts projected in walls & roofs. the rate inclusive of all lift and leads including necessary scaffolding as directed by the Engineer-in-charge. 18 Removing and placing the existing wooden furnitures and other movable items after executing the work including proper placing, cleaning wherever & whenever required as directed 19 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 20 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 21 Demolishing the existing wethering course laid in roofs and including disposal / levelling near the site as directed. 22 Supplying chemical emulsion in sealed containers including delivery as specified. 23 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 24 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 25 Along the external wall below concrete or masonry apron [email protected] linear metre including drilling and plugging holes etc.: 26 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration 27 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : 28 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 29 Providing and injecting approved grout inproportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) 30 Stirrer mixed SBR Polymer (of approved make) modified Cement slurrymade with Shrinkage Compensating Cement in concrete/RCC work. 31 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as perspecifications and direction of Engineer- In-charge complete in all respect. 32 Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 33 Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. 34 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 35 All kinds of soil. 36 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 37 Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 38 1:4:8 (1Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) 39 1:2:4 (1cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 40 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 41 Cement mortar 1:6(1 cement :6 coarse sand) 42 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : 43 Cement mortar 1:6 (1 cement: 6 coarse sand) 44 Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS :12894, in super structure above plinth upto floor V level. 45 Cement mortar 1 : 4 (1 cement : 4 coarse sand) 46 12 mm cement plaster of mix: 47 1:6 (1 cement: 6 coarse sand) 48 Providing and laying in position specified grade of reinforced cement concrete,excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level : 49 1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 50 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 51 Providing,transporting,hoistingandfixingaboveplinthlevelupto floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 52 Steelreinforcement forR.C.C.workincludingstraightening,cutting, bending, placing in position and binding all complete upto plinth level. 53 Thermo-Mechanically Treatedbars of gradeFe-500D or more. 54 Centering and shuttering including strutting, propping etc. and removal of form for 55 Lintels,beams,plinthbeams,girders,bressumersand cantilevers 56 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and sofits. 57 50 mm thick 58 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 59 Second class teak wood 60 Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI)non-decorative type,core of blockboardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 61 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 62 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 63 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)soliddoor/window/Clerestorywindows&otherFrames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A categorywithpropertyofbeingtermite/borerproof,water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 64 Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.edepth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 65 Frame size 45 x 85 mm 66 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 67 30 mm thick 68 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 69 Extra for providing vision panel not exceeding 0.1sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): 70 Rectangular or square 71 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 72 Providing and fixing bright /matt finished Brass tower bolt of approved quality & make with necessary screws etc all complete. 300mm x 10mm 73 Providing and fixing Stainless steel latest ornamental fancy handle 1metrelong including necessary screws as directed by the Enginner- in -charge 74 Providingandfixingaluminiumextrudedsectionbodytubulartype universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 75 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete 76 Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanizedmild steel section madeof requiredshape & size asper CPWDSpecification,uPVC extrudedglazingbeads,interlocksandlnlinesashadaptor(where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) 77 shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. 78 Note:-StructuraldesignproofcheckedfromaGovernment Engineering Institute,tobeprovidedbythemanufacturerfor (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 79 Using R3 series with frame (85 mm & above) x (40 mm & above) & glazed sash (30 mm & above) x (55 mm & above) & fly screen sash (20 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated handle on every glazedpanelalongwithmulti-pointlocking system. (Height upto 1.8 metre). 80 Fixed window/ ventilator without mullion /transom. 81 Using R2 series with frame (39 mm & above) x (39 mm & above). (Height upto 1.2 metre) 82 Providing and fixing glazing in UPVC window, ventilator shutters and partitions etc. as per the architectural drawings and the directions of engineer-in-charge. With colour glass panes of 4.0 mm thickness 83 Providing and fixing fiber glass mesh mosquito net in UPVC window, ventilator shutters etc. withas per the architectural drawings and the directions of engineer-in-charge. 84 Providing and fixing horizontal cassette roller blinds (Zebra) made of synthetic fabric of polyester /cotton with required pattern . Cassette mounting brackets shall support both the roller tube and the cassette. They must be capable of mounting inside, outside or to the ceiling, with the clutch on either right or left hand side of the roller. Cassette shall be installed to conceal the roller tube and mounting hardware. Cassette shall be made of approximately extruded aluminium and shall be painted with a high quality baked enamel finish, or finished with an anodized finish. Size of cassette depends on the size of blind.Cassette shall be able to accommodate a coordinated fabric insert and as directed by the Engineer-in-charge. 85 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : 86 For fixed portion 87 Powder coated aluminium (minimum thickness of powder coating 50 micron) 88 Forshuttersofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 89 Powder coated aluminium (minimum thickness of powder coating 50 micron) 90 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 91 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 92 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 93 Providingandfixingcupboardshutterwith 19mmthickoneside decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) 94 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 95 1.0 mm thick 96 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVCfoil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprisingof virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class A 97 category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.(Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 98 18 mm thick 99 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 100 200 mm 101 Providing and fixing bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. 100x10mm 102 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 103 50 mm 104 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade 1as per IS:1068 and fixing with necessary screws etc., complete. 105 Overall width 35 mm 106 Providing and fixing false ceiling at all heightincluding jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting & frame work with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I 107 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets andgalvanized with zinc coating of 120 gms/sqm(bothside inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm 108 long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, 109 all as per manufacturers specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 110 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main T runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross T of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between mainT at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick 111 (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main T runners to be suspended from ceiling using al. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main T. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 112 Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection >85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. 113 Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 114 Glazed Vitrified tiles Matt/Antiskid finish of size 115 Size of Tile 600 x 600 mm 116 Providingandfixing 18mmthickgangsawcut,mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 117 Granite stone slab of colour black, Cherry/Ruby red 118 Area of slab over 0.50 sqm 119 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 120 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 121 Providing and fixing white vitreous china laboratory sink 32 mm C.P brass waste fitting , suitable felxible PVC waste hose , and 32mm C.P . brass trap with necessary C.P . brass unions complete, including cutting and making good the wall wherever required : Size 600x450x200 mm 122 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 123 15 mm nominal bore 124 Providing and fixing wash basin with Rackbolt, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste fittings & waste hose of standard pattern,wherever required White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 125 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 126 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 127 W.C. pan with ISI marked white solid plastic seat and lid 128 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 129 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 130 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 131 15 mm nominal bore 132 Providing and fixing PVC multi trap (Nahini trap) with jalli including necessary fittings as directed by the Engineer - in- charge. 100mm dia 133 Providing and fixing CP two way tap of approved quality as directed by the Engineer-in-charge 15mm nominal bore 134 Providing and fixing CP coatedhealth faucet 1.0mtr length of approved quality with necessary fittings and screws as directed by the Engineer - in -charge 135 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 136 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. 137 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 138 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 139 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. 140 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 141 Inside size 90x80 cm and 45 cm deep including C.I. coverwithframe(lightduty) 455x610mminternal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 142 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 143 Providing and fixingPVC SWR pipes Type B conforming to IS:13592 including jointing with necessary fittings as directed by the Engineer-in-charge. 150mm diameter 144 Providing and fixingPVC SWR pipes Type B conforming to IS:13592 including jointing with necessary fittings as directed by the Engineer-in-charge. 110mm diameter 145 Providing and fixingPVC SWR pipes Type B conforming to IS:13592 including jointing with necessary fittings as directed by the Engineer-in-charge. 63mm diameter 146 Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: 147 All kinds of soil 148 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 149 ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 150 20 mm nominal dia Pipes 151 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 152 25 mm nominal dia Pipes 153 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 154 25 to 40 mm nominal bore 155 Providing and fixing CPVC ball valve of approved quality, High or low pressure, with plastic floats complete as directed by the Engineer -in -charge. 25 mm nominal bore 156 Providing and fixing granite of 18 mm thick gang saw cut, mirror polished (double side), premoulded and prepolished, machine cut for urinal spearator and similar locations of required size (1300mm x 600mm), approved shade, colour, textureand fixing the walls as per site condition, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 157 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mmwith fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 158 Providing and fixing CP brass urinal half turn valve of aprroved quality as directed by the Engineer-in-charge. 15mm nominal bore 159 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 160 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for pressed clay roof tiles as directed. 161 Providing & Applying polymer modified, flexible cementatiouswaterproofing coating with elastic waterproofing polymers on roofsurface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer(dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. 162 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 163 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 164 Hot finished welded type tubes 165 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 166 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete 167 Providing and fixing precoated galvanised iron profile sheets (size, shape andpitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shallbe fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 168 Providingand fixingexpansionhold fasteners onC.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 169 Wedge expansion type 170 Fastener with threaded dia 12 mm 171 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 172 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 173 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 174 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approvedbrandandmanufacture,includingapplyingadditionalcoats wherever required to achieve even shade and colour. 175 Two coats 176 Providing andapplyingplaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. 177 Finishing walls with Acrylic Smooth exterior paint of required shade: 178 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 179 Finishing walls with textured exterior paint of required shade: 180 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 181 Providing and applying acrylic based granular textured wall coating finish in any shade with spray coat bubble or compact or rustik shade.The rate inclusive of POP punning to the wall with proper level & making grooves and preparation of surface as directed. new work two or more coats applied @ 3.28ltr/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm 182 Cutting holes up to 30x30 cm in walls including making good the same: 183 With common burnt clay F.P.S. (non modular) bricks 184 Providng and fixing precast reinforced cement concrete rings with 25mm thick of size 450mm dia & height 300mm in existing masonry walls with neat finishing as per the direction of Engineer-in-charge. 185 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 186 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. 187 Making through holes in plain or reinforced cement concrete / brick masonry wall with diamond core drilling system by mechanical means as directed100mm dia 188 Providing polishing white pebbles stone for vase fillers outdoor / indoor decoration as directed by the engineer-in-charge. size 20mm to 40mm 189 Providing and fixing wall lining / ceiling factory made moulded WPC ( wood polymer composite)louver panel at all height with contemporary design ,jointing and finishing to a flush finish with recommended screws all as per manufacturers specification including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge. (Excluding the cost of frame work or backing boards) 160 wide x23 mm thick 190 Cutting / Carving of plywood / ACP sheet/WPC/PVC/ cement board with CNCoperations in the required patternas directed by the Engineer-in-charge upto 25mm thick 191 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing andmakingcurvature(wherever required)andfittingthesame with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 192 Making letter with 12mm thick WPC sheet in all colours including neccssary machine cutting andneat finishing with sutable font. Fixing and placing in position at required height with neccssary screws / bolt & nuts. The rate inclusive of all transport charges , scaffolding and neccssary fittings as directed by the Engineer In-charge. 200mm high 193 Providing and fixing PVC beading for corner of the ceramic glazed wall tiles area and positioning as approved by engineer in charge. 194 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 195 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 196 Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with Non -decorative lamination on both sides 197 Providng and fixing precast reinforced cement concrete rings with cover 25mm thick of size 900mm dia & height 300mm by using 6mm mild steel reinforcement 100mm c/c in both direction. The rate inclusive of all lifts and leadsas directed by the Engineer-in-charge. 198 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 199 Weathering course using best quality of broken jelly of 20mm gauge in pure slacked lime (no sand to be added) over roof slab the proportion of brick jelly to lime being 32:12.5 by volume and laid over in a single consolidated to the required design and finished thickness by beating the concrete with wooden beater to the size required slope of approved pattern and keeping the surface constantly wet by sprinkling lime jaggery water as per standard specification and as directed by the departmental officers. 200 Providing and laying pressed clay tiles (as per approved pattern 18 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. 201 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 202 Fixed to openings /wooden frames with rawl plugs screws etc. 203 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 204 Providing and fixing glass door stainless steel lock of approved quality , design and make with necessary fixing arrangements as directed by the Engineer-in-charge. 205 Supplying and fixing self adhesive decorative film for glass doors/ winows /glass partition/backing of suitable boards including requireddesign as directed by the Engineer-in-charge. 206 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 207 150 x 100 mm size P type 208 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 209 Supplying and Fixing of stainless steel (304 grade) polished CSIR-Emblemfinished with suitable mounding struds inluding neat finishing at directed by Engineer-in-charge 450mm dia 210 Dismantling doors, windows,wooden board,wooden frames,aluminium partitions,false ceiling materials and clerestory windows (steel ,aluminium or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 1500 metres lead (store yard) : 211 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 212 For pipes 100 to 250 mm diameter 213 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 3 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / 214 Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws,nuts,bolts, washers,cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain 215 wall with aluminium compositepanel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. 216 Providing and fixing on wall face unplasticisedRigidPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 217 110 mm diameter 218 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. 219 Bend 87.5° 220 110 mm bend 221 Shoe (Plain) 222 110 mm Shoe 223 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable insurface /recessedmediumclassPVCconduit,withmodular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 224 Group C 225 Wiringfortwincontrollightpointwith 1.5sq.mmFRLSPVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable GI box and earthing the point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 226 Wiringforcircuit/submainwiringalongwithearthwirewiththe followingsizesofFRLSPVCinsulatedcopper conductor,single corecableinsurface/recessedmediumclassPVCconduitas required. 227 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 228 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 229 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 230 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 231 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire 232 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 233 4 X 10 sq. mm + 2 X 6sq. mm earth wire 234 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 235 Supplyingand drawingfollowingpair 0.5mmdiaFRLSPVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 236 2 Pair 237 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 238 25 mm 239 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 240 100 mm X 100 mm X 60 mm deep 241 200 mm X 150 mm X 75 mm deep 242 200 mm X 300 mm X 100 mm deep 243 Supplying and fixing following modular switch/ socket on the existing modularplate&switchboxincludingconnectionsbutexcluding modular plate etc. as required. 244 5/6 A switch 245 15/16 A switch 246 3 pin 5/6 A socket outlet 247 6 pin 15/16 A socket outlet 248 Telephone socket outlet 249 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 250 Supplyingandfixingfollowingsize/modules,GIboxalongwith modular base & cover plate for modular switches in recess etc. as required. 251 1 or 2 Module (75mmX75mm) 252 3 Module (100mmX75mm) 253 6 Module (200mmX75mm) 254 12 Module (200mmX150nnm) 255 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 256 Installation,testingandcommissioningofpre-wired,fluorescent fitting / compact fluorescent fittingof alltypes,complete withall accessoriesand tube/lamp etc.directly on ceiling/ wall,including connectionswith 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 257 Numberingofceilingfan/exhaustfan/fluorescentfittingsas required. 258 Wiring for group controlled (looped) light point/fan point/exhaust fan point/call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit,and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 259 Group C 260 Supplying and fixing following way,horizontal type three pole and neutral,sheetsteel,MOBdistributionboard, 415V,onsurface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 261 4 way (4 + 12), Double door 262 6 way (4 + 18), Double door 263 8 way (4 + 24), Double door 264 Supplyingand fixingof following ways surface/ recessmounting, vertical type, 415 V, TPN MOB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MOB TPDB is normally used where 3 phase outlets are required.) 265 4 way (4 + 12), Double door 266 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles intheexistingMOBDBcompletewithconnections,testingand commissioning etc. as required. 267 Single pole 268 Double pole 269 Triple pole 270 Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required. 271 Supplying and fixing DP sheet steel enclosure on surface/ recess alongwith 25/32A240VCcurveDPMCBcompletewith connections, testing and commissioning etc. as required. 272 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 273 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415Volts,onsurface/recess,completewithtestingand commissioning etc.as required. 274 For 4 way, Double door TPN MCBDB 275 For 6 way, Double door TPN MCBDB 276 For 8 way, Double door TPN MCBDB 277 Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete withtesting and commissioning etc. as required. 278 Supplyingandinstallingfollowingsizeof perforatedpaintedwith powdercoatingM.S.cabletrayswithperforationnotmorethan 17.5%,in convenient sections, joined with connectors, suspended fromtheceilingwithM.S.suspendersincludingbolts&nuts, painting suspenders etc as required. 279 150 mm width X 50 mm depth X 1.6 mm thickness 280 300 mm width X 50 mm depth X 1.6 mm thickness 281 Supplyingandinstallingfollowingsizeof perforatedpaintedwith powder coatingM.S.cable traysbends withperforationnot more than 17.5%„ joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 282 150 mm width X 50 mm depth X 1.6 mm thickness 283 300 mm width X 50 mm depth X 1.6 mm thickness 284 Supplyingandinstallingfollowingsizeof perforatedpaintedwith powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspendersincludingbolts&nuts,paintingsuspendersetcas required. 285 300 mm width X 50 mm depth X 1.6 mm thickness 286 Earthing withG.I.earthplate 600mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate havinglocking arrangement and wateringpipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 287 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate havinglocking arrangement and wateringpipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 288 Supplying andlaying 25 mm X 5 mm copper strip at 0.50 metre belowground asstrip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 289 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 290 Providing and fixing 25 mm X 5 mm GI. strip on surface or in recess for connections etc. as required. 291 Providingandfixing4.00mmdiacopper wireonsurfaceorin recess for loop earthing as required. 292 Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. 293 Laying of one number PVCinsulated andPVC sheathed / XLPE power cable of 1.1KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 294 Above 35 sq. mm and upto 95 sq. mm 295 Above 95 sq. mm and upto 185 sq. mm 296 Laying of one number PVC insulated andPVC sheathed / XLPE powercableof1.1KVgradeoffollowingsizeintheexisting masonry open duct as required. 297 Above 35 sq. mm and upto 95 sq. mm 298 Above 95 sq. mm and upto 185 sq. mm 299 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 300 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) 301 Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mmMS flat clamp) 302 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. 303 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) 304 Supplyingandmakingendterminationwithbrass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1KV grade as required. 305 312 X 70 sq. mm (38mm) 306 3% X 150 sq. mm (50mm) 307 Supplying and fixing of 32 mm dia X 2.00 metres long GI. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 308 Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. 309 Supplying and laying of following sizeDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 310 90 mm dia (00-90 mm & I0-76 mm nominal) 311 120 mm dia (00-120 mm & ID-103 mm nominal) 312 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLOC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 313 Removing the existing TPN and SPN DBs,changeover switch Db,SFU’s of all size, Fuse carriers,Main switches, Sub main, circuit and point wirings,switch boards, power boardsfan and light fittings with Various size of cables , removing of Incoming cables/wires for old PDB and LDB and other unused and worn-out electrical installations, and other unwanted Electrical materials in the proposed area complete in all aspects as per site condition and returning the removed items to the departments stores or any such place within the campus area as directed by the engineer in charge as per site condition. 314 Shifting of 15 KVA UPS System (including UPS Unit and Batteries) from passage to proposed new panel room. Scope includes:Disconnecting ,shifting andreconnecting UPS,Batteries (20Nos) power and battery cables, Installation and realignment in new location, Testing and commissioning all required manpower, tools, and accessories as per site condition. 315 LED Street Light Fitting :Supply and fixing ofoutdoor type LED Street light fitting,36W, in the existing pole (up to 40mm dia ) located in site along with all accessories as required as per site condition. Simial to JV Lukers STRADA Model No.LST- 36 or Equivalent as approved by department.(note:The fitting should have 2 years warranty replacement) 316 2 FtLED Batten:Supply of 2 feet extruded aluminium LED batten indoor type 12W, having high efficiency, flicker free suitable for wall, surface and conduit mounting system with required accessories as required. Similar to Philips Endura Smat BrightModel No. BN021 LED12S-6500 PSU GR or Equivalent with time of 25,000 hours as approved by department 317 LED ML Fitting : Supply of LED mirror light fitting of 18 W,WW having high efficiency,wall/ surface mounting with suitbale driver of wide voltage range as required. Similar to JV Lukers LITA T8 Model No.LMCL 18 or Equivalent as approved by department.Note:the fitting shall have 2 years warranty replacement 318 12 Way VTPN DB with 100 A MCCB:Supplying and fixing 12 way surface/ recess MCCB mounting, 415 volts, vertical type TPN MCB distribution board (with wire way/cable end box) of sheet steel,dust protected, duly powder painted, inclusive of 160 amps tinned copperbusbar,commonneutrallink,earthbar,dinbarfor mounting MCBs, along with 100 A,16/25 KA TPN MCCB, phase barrier and spreaders for incomer, interconnection between DB incomer and the bus bars/Existing mains shall be made with copper cables of appropriate rating as required.The VTPN DB shall be mounted on a adequate size angle/flat and grouted/ fixed (drilling,cutting welding painting etc)firmly in the existing wall/ existing base channel as required as per site condition complete in all aspects.The above DB shall include the following C series, 10 kA MCBs in the out going circuits 319 TP MCB-63A-2 NosSP MCB-6-32A-30 NosBlanking plates -As required.Make : Legrand /Schneider /Siemens/Hager or equivalentsubject to the approval of the department. 320 TP +N MCB With Enclosure for AC outdoor:-Supplying and fixing TP+N415 volts, 63 amps,C Series,MCB including Enclosure asrequired as per site condition complete in all aspects . 321 Raceway 100x50 mm: Supply and fixing of100 x 50 mm UPVC cable management complete system / raceway trunking along with all accessories as requiredin surface and carrying out the proposed electrification works complete in all aspects as required as per site condition.Make : MK/ Legrand/Siemens or Eauivalent as approved by department. 322 Raceway 50x50 mm:Supply and fixing of50 x 50 mm UPVC complete cable managementsystem / raceway trunking along with all accessories as requiredin surface and carrying out the proposed electrification workscomplete in all aspects as required as per site condition.Make : MK/ Legrand/Siemens or Eauivalent as approved by department. 323 TP MCB:-Supplying and fixing TP 415 volts, 63 amps,C Series,MCBin the existing DBas required as per site condition complete in all aspects . 324 TP +N MCB:-Supplying and fixing TP+N415 volts, 40 amps,C Series,MCBin the existing DBas required as per site condition complete in all aspects . 325 2x2 LED fitting: Supply and fixing recessed mounting2x2 LED energy efficient fitting, 4200 lumens, around 40 watts,WW/WHalong with suitable driver with ripple less than 5%for flicker/glare-free light in the existing false ceiling with required accessoriessuch as chain/stringfor supporting the fittings firmlyin the ceiling including interconnections as required. Similar to Philips Full Glow G6 Model No : RC380B LED 42S-6500/4000 G6 l60 W60 PSU OD or Equivalent as approved by department.(Note:The Fitting Should have 2 years warranty replacement) 326 2x2 LED fitting: Supply ofrecessed mounting2x2 LED energy efficient fitting, 4200 lumens, around 40 watts,WW/WH along with suitable drive rwith ripple less than 5%for flicker/glare-free light as required. Similar to Philips Full Glow G6 Model No : RC380B LED 42S-6500/4000 G6 l60 W60 PSU OD or Equivalent as approved by department.(Note:The Fitting Should have 2 years warranty replacement) 327 Square/RoundLED down lighter :Supply and fixing ofrecessed mounting Square Down lighter LED energy efficient fitting,1200 lumens, 12W, WW/WH light along with suitable driver in the existing false ceiling with required accessories for mounting the fittings firmlyin the ceiling including interconnections as required. Similar to Philips Sleek surface slim profile SM250/260 LED 12S 6500 PSUor Equivalent as approved by department.(Note:The Fitting Should have 2 years warranty replacement) 328 Square/RoundLED down lighter :Supplyofrecessed mounting Square Down lighter LED energy efficient fitting,1200 lumens, 12W, WW/WH light along with suitable driver in the existing false ceiling with required accessories for mounting the fittings firmlyin the ceiling including interconnections as required. Similar to Philips Sleek surface slim profile SM250/260 LED 12S 6500 PSUor Equivalent as approved by department.(Note:The Fitting Should have 2 years warranty replacement) 329 Smart LED Strip Light : Supply, installation, testing and commissioning of indoor type, 5 mtr, 12 V,25 W,2200 lumens, Smart WiFi Tunable white strip light that works works with voice/ WiZ connected/remote based application along with suitable AC driver of continuous duty,etc having an adhesive for firm fixing and2 years replacement warranty etc.The strip light shall be installed in the existing confernce room wall panel/ false ceilingwith required accessories, interconnections of adequate rated cables complete in all aspects as required as per site condition. Similar to Phlips 5 Mtr WiZ Smart Strip LightProduct SKU : 929003551501 or equivalent as approved by department. 330 4 Ft Industrial LED Batten:Supply of standard 4 feet industrial indoor 40W,LED batten having high efficiency, flicker free suitable for wall, surface and conduit mounting system with required accessories as required. Similar to Philips Endura LED Next Model No. BN308CLED40S-6500 L1 PSD or Equivalent as approved by department.(Note:The LED batten shall have minimum 2 years relacement warranty.) 331 LED Wall Lamp : Supply, installation, testing and commissioning of indoor type bigwall mounted modern creative light fixture LED wall lampmade up of glass or combination of metal and crystal material having Gold/Shining lamp shade, Bold vibe, Abstract pattern and the model will be selected by the engineer in-charge . the basic amount of the fitting should be reckoned as Rs 5000/ (± 5%) excluding GST. operating with AC source of power supply, having a replacement warranty of 1 year, complete with wall lamp and bulb to be suitably mounted in the wall mounting panel and other structures with required accessories, interconnections of adequate rated cables complete in all aspects as required as per site condition. 332 LED Silicon Neon Profile Tube Light Lighting: Supply, installation, testing and commissioning of indoor type, 10 mtr, 24 V,75 W,vibrant lighting with low energy consumptionalong with suitable AC driver of continuous duty,etc having an adhesive for firm fixing and2 years replacement warranty etc.TheProfile Tube Light shall be installed with different meter length in the existing conference room wall panel/ false ceilingwith required accessories, interconnections of adequate rated cables complete in all aspects as required as per site condition. Similar to Harold 10 Mtr Silicon Neon Profile Tube Light or equivalent as approved by department. 333 Butterfly Gold LED Wall Lamp:Supply, installation, testing and commissioning of indoor type bigwall mounted modern CITRA Transparent Acrylic Butterfly Gold LED Wall Lamp Bedside Light - Warm Whitemade up of Metal or combination of metal and crystal material having Gold lamp shade, Bold vibe, Abstract pattern and minimum dimension of 24Lx19Wx12H CM, AC source of power supply, having a replacement warranty of 1 year, complete with wall lamp and bulb to be suitably mountedin the wall mounting panel and other structures withrequired accessories, interconnections of adequate rated cablescomplete in all aspects as required as per site condition. Similar to CITRA Transparent Acrylic Butterfly Gold LED Wall Lamp Bedside Light - Warm White or equivalent as approved by the department. 334 Sun flower Wall Lamp:Supply, installation, testing and commissioning of indoor type bigwall mounted modern Lamp master 3-in-1 LED Sunflower Wall made up of Acrylic or combination of metal and crystal material having Lamp master 3-in-1 LED, Abstract pattern and minimum dimension of 23Lx5Wx23H CM, AC source of power supply, having a replacement warranty of 1 year, complete with wall lamp and bulb to be suitably mountedin the wall mounting panel and other structures withrequired accessories, interconnections of adequate rated cablescomplete in all aspects as required as per site condition. Similar to Lamp master 3-in-1 LED Sunflower Wall & Ceiling Light - Creative Acrylic Decorative Wall Light or equivalent as approved by the department. 335 Exhaust fan CATA C B15 Matic: Supplyingand fixing of window mounted plastic housing of industrial type white colour exhaust fan,automatic shutter, 220-240 V 50 Hz,class B insuslation, theramal cutout,43 dB noise level, 40 Deg ambient, 320 CFM suitable for 150 Sq Ft size room in the existing window of the bathroom as required with necessary accessories, interconnection etc as per site condition. Similar to CATA C B15 Maticor equivalent as approved by department. 336 Supply of constant current LED Driver suitable for 2x2’ Full Glow LED Fitting, with thespecifications is Input Voltage: 140–270V AC, Output: Constant current, suitable for 36W–40W LED, Power Factor: ≥0.95, THD: <10%, Surge Protection: ≥4kV, Efficiency: ≥85%, Specify approved make or “equivalent” 337 Supply of LED Driver for Down lighter LED fitting 12W, 1200 Lumens, WW/WH color. Input: 220-240V AC Output: 12V/Constant Current, PF > 0.9 , Efficiency > 85% , THD < 15%, CE/RoHS compliant andSpecify approved make or “equivalent”. 338 Supplyand installtion of Rubber mat of size (100X200) cm as persite condition at VTPN DB area of thickness as per standard IS 15652. 339 Supplying & fixing of ariel clamp set of Suitable angle for fixing following HRC Fuse Base and Fuselink on the LT polewith 250 AMPS HRC Fuse base (make: L&T) and 250 A HRC Fuse link (make:L& T) with necessary accessories assembled as complete set and mounted in the existing LT pole along with the termination of UG cable as required as per site condition. 340 Dispensary MV Distribution Panel a) Supply, installation, testing and commissioning of In Door type panel manufactured by a CPRI approved panel fabricator compling IS standards.LT Panel Sheet thickness should not be less than 2.00 mm for load bearing members and doors and LT panel cubicle/vertical should be with 9 fold design structure for more strength, with detachable gland plates of 3mm thick for entry of cables from the top/bottom as required with 400A ratings electrolytic copper bus bars with sleeves (100% for phases & 50% neutral & as per standards for earth running all around the panel), free standing, totally enclosed, suitable for 3 phase and neutral. The panel should be modular in design with ZERO welding and suitable for 415 V, 3 phases, 50 Hz, 4 wire systems IP 43 & IK09. The LT panel bus bars shall be supported with the Glass reinforced Polyamide 6.6 type bus bar support suitable up to 140 deg C. Main incoming & outgoing switchgear/circuit breakers should be of same manufacturer and switchgear should be of same series/model of the OEM. 341 No live part should be accessible from the front, while operating the door. Total Discrimination chart should be prepared for all the LT panels & should be submitted before approval along with GA Drawing. Incomer :- 1 No’sof 320 Amps 4 pole Changeover switch parallel with a separate suitable HRC fuse carrier set along with neutral bus on the load side with necessary interconnections as required as per standards etc, direct rotary handle, 2 set of spreader terminal, phase barrier,intersource barrier, shorting links set of 4,415/690 V AC, 100 % Neutral,12.5 kA, insulation voltage of 1000 V Ac, impulse voltage of 12 kV, mechanical and electrical rating of 10000 and 2000 cycles respectively confirming to IS as amended up to date complete withall otheraccessories etc as required. Similar to TSE power line, Frame-2 Cat No.424188 of Legrand or equivalent as approved by department. 342 i) Digital multifunction meter class 1 accuracy, with Rs 485 portoutput for communication toread V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, etc - 1No.ii) 320A/5A CL.1 accuracy, 15VA burden CT - 3 Nos.iii) RYB and ON, OFF, indication lamps for both source connected with suitable control fuse and MCB -1 Set.Outgoing: 8 No’s of100 Amps TPN MCCB (Icu=10 kA=Ics )Thermal magnetic based, 415V, 100% Neutral, rating confirming to IS as amended up to date complete with over current & short circuit protection, spreaders, phase barriers, direct rotary handle etc with required interconnections as required complete in all aspects as required 343 Erection in all aspect including providing necessary angle iron channels for the panel to be mounted on the existing trench/brickwork/panel room, with required fastners, accessories and other allied works deemed to be required to complete as per site condition (including necessary civil works as required and finishing the same to the original condition, along with cable excavation for loose/loop purpose as required.) 344 Supply, fabrication, and installation of CRCA metal enclosure with sealing arrangments as per EB requirements, 2 MM thickness (powder coated) of minimum size 400mm (W) x 300mm (D) x 500mm (H)along with electrolytic copper bus bar rated for 300A, mounted inside the enclosure with suitable supports, sleeves, and interconnections for incomer and outgoing connections and3mm thick detachable gland plates for 150 Sqmm aluminium cable entry from top/bottom as required. The cable end box shall be mounted on a adequate size angle/flat and grouted/ fixed (drilling, cutting welding painting etc) firmly in the existing wall/ existing base channel as required as per site condition complete in all aspects. 345 Shifting of TNEB Metering Board Three Phase: a)Supplying and fixing of suitable size of teakwood plank for fixing of existing meter and other accessories as required.b) Supplying and fixing of required 03 nos of 63A-100A porcelain fuse unit. c)Supplying and Fixing of copper earth strip of size 19mm X 3mmthick of6`` length for earth connections as reqd. The above complete set has to be mounted on wall. The charge including all interconntions and masonry works etc. d)Re fixingor shifting of Existing Meters (10-60A) with new boards including remitting of necessary charges to TNEB for meter shifting on behalf of CSIR-CECRI and co-coordinating with TNEB officials in all aspects in order to charge the meteringboard complete as required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
45.
Public Administrative Department #10055444 Price Bid
Supply Of Sanitary Napkin Incinerato Supply Of Sanitary Napkin Incinerator , Supplying Polythene , Supply Of Sanitary Napkin Incinerator ( Destroys Solid Sanitary Napkins Hygienically, Powder Coated Steel Body, User Friendly Features And Easily Usable, Operates On Electricity, Burns 150 To 200 Napkins Per Day, Can Be Programmed For Cycles / Day, Burns Napkins Completely Producing Only Less Than 1 Gm Of Ash Per Napkin, Ash Collection Tray For Easy Cleaning, Automatic Temperature Maintenance, Auto Power Off, Auto Thermal Cut-Off For Safety Of User, Ceramic Insulation For Excellent Thermal Protection, Wall Mountable The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Others , Supply Ofhand Cart With Double Tyre Wheelbarrow With Big Bucket Angle Frame 3 X 2 X 1 Foot The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Supply Ofmechanized Chopping Machine The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Supply Of Sieve Machine The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur. , Supply Of Tools & Accessories [ Spade ( 2Nos ) , Belcha ( 3Nos ) , Jhari ( 2Nos ) , Weight Machine ( Up To 100 Kg Weight ) Etc. ] The Rate To Be Included Loading, Unloading & Transporting From Manufacturer’S Place To Palaspai Gram Panchayat Office, Palaspai, Paschim Medinipur.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
46.
Home Affairs #10027813 AOC
Supply Of Furniture Articles / Items , Godrej Steel Almirah (78 X 35 X 19) Four Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Raj & Raj Steel Almirah (78 X 35 X 19) Four Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Khaitan Steel Almirah (78 X 35 X 19) Four Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Local Made Non-Branded Steel Almirah (78 X 35 X 19) Four Fixed Shelves Painted 20 Gaugecolor -Ash / Brown , Godrej Steel Almirah (50 X 30 X 17) Three Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Raj & Raj Steel Almirah (50 X 30 X 17) Three Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Khaitan Steel Almirah (50 X 30 X 17) Three Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Local Made Non-Branded Steel Almirah (50 X 30 X 17) Three Fixed Shelves Painted 20 Gauge Color -Ash / Brown , Godrej Half Secretariat Table (48 X 24 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Raj & Raj Half Secretariat Table (48 X 24 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Khaitan Half Secretariat Table (48 X 24 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Local Made Non-Branded Half Secretariat Table (48 X 24 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers(With 24 Gauge Sheet) With Locks And Fully Painted. , Godrej Full Secretariat Table (60 X 36 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Raj & Raj Full Secretariat Table (60 X 36 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Khaitan Full Secretariat Table (60 X 36 X 30) Steel Tabulbar Frame (24 Gauge) With Sunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Local Made Non-Branded Full Secretariat Table (60 X 36 X 30) Steel Tabulbar Frame (24 Gauge) Withsunmica Top And Three Side Drawers (With 24 Gauge Sheet) With Locks And Fully Painted. , Godrej Excutive Tables (72X48X30) Steel Frame With Three Drawers And A Tray On One Side And A Cup Board With One Shelf On The Other Side With Door And Handle, Sunmika Top, Full Painted. , Raj & Raj Excutive Tables (72X48X30) Steel Frame With Three Drawers And A Tray On One Side And A Cup Board With One Shelf On The Other Side With Door And Handle, Sunmika Top, Full Painted. , Khaitan Excutive Tables (72X48X30) Steel Frame With Three Drawers And A Tray On One Side And A Cup Board With One Shelf On The Other Side With Door And Handle, Sunmika Top, Full Painted. , Local Made Non-Branded Excutive Tables (72X48X30) Steel Frame With Three Drawers And A Tray On One Side And A Cup Board With One Shelf On The Other Side With Door And Handle, Sunmika Top, Full Painted. , Damro Excutive Revolving Chair Model- Och043 High Back (5 Wheels Balls) (Colour- Blue/Black/Red) {For Superior Officer} , Godrej Excutive Revolving Chair-High Back Godrej Type (5 Wheels Balls) {For Superior Officer} , Raj & Raj Excutive Revolving Chair-High Back Godrej Type (5 Wheels Balls) {For Superior Officer} , Khaitan Excutive Revolving Chair-High Back Godrej Type (5 Wheels Balls) {For Superior Officer} , Local Made Non-Branded Excutive Revolving Chair-High Back Godrej Type (5 Wheels Balls) {For Superior Officer} , Local Made Non-Branded Steel Rack (72X35X15) With Six Shelves Duly Fixed With Nut & Bolts Painted 18 Gauges. Color -Ash / Brown. , Local Made Non-Branded Steel Rack (35X35X15) With Three Shelves Duly Fixed With Nut & Bolts Painted 18 Gauges. Color -Ash / Brown. , Local Made Non-Branded Steel Rack, Size 6X7X13 With 5 (Five) Shelves, Heavy Type. Color -Ash / Brown , Plastic Chair With Arms- Nilkamal - Chr 2051 , Plastic Moulded Table - Cello - Luxury , Plastic Moulded Chair - Without Arms- Cello - Luxury , Godrej Composite Computer Table With Provision For Cpu Monitor, Key Board, Printer, Ups, Floppy Rack, Scanner & Drawers Size (48X30X30) , Nilkamal Composite Computer Table With Provision For Cpu Monitor, Key Board, Printer, Ups, Floppy Rack, Scanner & Drawers Size (48X30X30) , Godrej Computer Chair - Revolving With Arms. , Local Made Non-Branded Computer Chair - Revolving With Arms. , Godrej Computer Chair - Revolving Without Arms , Local Made Non-Branded Computer Chair - Revolving Without Arms , Godrej Steel Tubulor (1 Squire Pipe) Chair With Arms Cushion Seat & Back, 18 Gauge , Wall Clocks (Quartz)- Ajanta Model No. 497 , Local Made Non-Branded Long Back Bench With Side Arms Rest - Iron Frame With 6 Legs, Cushion Seat And Cushion Back With Foam Cover : Size-6 Ft. -- Painted (Weight Of The Frame To Be Mentioned) , Local Made Non-Branded Single Seater Cushioned Chair , Local Made Non-Branded Double Seater Cushioned Chair , Non-Branded Three Seater Cushioned Chair , Godrej File Cabinate Size 54X27X18 , Godrej Book Show-Case Size 66X33X12 , Raj & Raj Book Show-Case Size 66X33X12 , Local Made Non-Branded Book Show-Case Size 66X33X12 , Non-Branded Leather Cash Carry Bag , Non-Branded Table Glass - 6 Mm Thick , Supreme Ornate Chair , Nilkamal Ornate Chair , Non-Branded Leather Attachee For Superior Officer (Size 18X22) , Local Made Non-Branded Garden Chair 4 (Four) Seater With Iron Frame , Office Chair Aristocrat With Rised Back Fitted Leather Cusion On Top And Bottom, Steel Frame And Wooden Hand Rest Nilkamal , Local Made Non-Branded Office Book Shelf Vineer Fitted 6 X 2 , Local Made Non-Branded Office Aristocrat Table Additional Attachment , Local Made Non-Branded Steel File Cabinet 6 X 3 With Three Swing Door Glass Fitted Painted 24 Gauge , Godrej Office Revolving Hydrolic Adjustable Comfortable Chair , Raj & Raj Office Revolving Hydrolic Adjustable Comfortable Chair , Non-Branded Office Revolving Hydrolic Adjustable Comfortable Chair , Non-Branded Centre Table With Two Glass Shelves And Designer Pattern , Local Made Non-Branded Sofa Set With Modular Seat Adjustable And Twin Cusion 15 X 3 , Local Made Non-Branded Sofa Set With Modular Seat Adjustable And Twin Cusion 6 X 3 , Local Made Non-Branded Wooden Framed Notice Board With Cusion , Local Made Non-Branded Wooden Framed (Ply Wood) Sucession Board , Local Made Non-Branded Eched Glass Coloured Logo 3 ½ X 3 5 Mm , Fire Extenguiser (Ecofire Abc Type, Powder Type Fire Extenguiser, 4 Kg) , Fire Extenguiser (Ecofire Co2 Type Fire Extenguiser, 4.5 Kg) , Water Purifier (Eureka Forbes - Aquaguard, Reviva 8 Ltrs) , Water Purifier (Eureka Forbes - Aquaguard, Magna 7 Ltrs)
Contract Date: Apr 20, 2026 Contract Value : 8.51 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
West Bengal View Result →
47.
Educational and Research Institute #10000242 AOC
Tender For Construction Of Ctvs Transplant Ward In Aiims Raipur; 1 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 2 Centering and shuttering including strutting, propping etc. and removal of form for 3 Lintels, beams, plinth beams, girders, bressumers and cantilevers 4 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5 Thermo-Mechanically Treated bars of grade Fe-500D or more. 6 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 7 Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. 8 Cement mortar 1 : 3 (1 cement : 3 coarse sand) 9 Providing and fixing 15-17 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, skirtings and similar locations of required size, approved shade, colour and texture laid with epoxy resin based adhesive, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cleaning, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite stone slab colour black, Cherry/Ruby red and any size: 10 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 11 40 mm 12 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 13 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 14 250x16 mm 15 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 16 200x10 mm 17 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 18 Twin rubber stopper 19 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 20 Double strip (horizontal type) 21 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 22 Providing and fixing to existing door frames. 23 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 24 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 25 100mm 26 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin- charge.(Payment of providing and fixing auto closing hinges shall be paid separately) 27 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge 28 200 mm 29 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. 30 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 31 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 32 Size of Tile 600x600 mm 33 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 34 110 mm diameter 35 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mmmade out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, lightfittings, fixtures, smoke detectors etc., wherever required. 36 Main ‘T’ runners to be suspended from ceilingusing G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dashfasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted withpolyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 37 12 mm cement plaster of mix : 38 1:6 (1 cement: 6 fine sand) 39 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 40 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 41 Two coats 42 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge 43 In cement mortar 44 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 45 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 46 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 47 W.C. pan with ISI marked white solid plastic seat and lid 48 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 49 White Vitreous China Angle back wash basin size 400 x 400 mm with single 15 mm C.P. brass pillar tap 50 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : 51 Size 600x450x200 mm 52 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 53 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 54 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 55 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 56 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge. 57 50 mm nominal dia Pipes 58 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 59 20 mm nominal dia Pipes 60 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 61 25 to 40 mm nominal bore 62 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 63 20 mm nominal bore 64 Providing and fixing uplasticised PVC connection pipe with brass unions : 65 45 cm length, 15 mm nominal bore 66 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 67 15 mm nominal bore 68 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 69 15mm nominal bore 70 Providing and fixing PTMT grating of approved quality and colour. 71 Circular type 100 mm nominal dia 72 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 73 For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron) 74 For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately)Powder coated aluminium (minimumthickness of powder coating 50 micron) 75 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. 76 Pre-laminated particle board with decorative laminationon both sides 77 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketn etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 78 With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) 79 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 80 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixedm with water proofing cement compound @ 0.126 kg/sqm. Thislayer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 81 Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : 82 Providing and fixing in position Double bay stainless steel (304 grade) scrub station of size 1220x610x1500 mm with automatic sensor & foot operated tap with hot and cold water temperature controller valve and foot operated soap dispenser arrangement of approved make and quality as per the direction of engineer in charge. 83 Providing and fixing 44 mm thick HPL (Hinge Pressure Laminate ) Hermetic Hinge single Leaf Door for civil opening 1800(W)x2100 (H) with S.S. Ball bearing hinges , D Handles , both side key operation dead lock ,View window size 300x300 mm ,sealing gasket, Automatic Drop seal ,door seal and one door closer etc. all complete as per instructions of Engineer In charge. 84 Providing and fixing frosted film of make 3M/Avery/Oracal and of thickness not less than 1 mm over the glass of windows, glass partition etc including cutting of film in a certain design, shape all complete as per the instructions of Engineer In charge. 85 Providing and applying anti microbial epoxy PU flooring of thickness not less than 3 mm, in required colour, patterns etc. having anti skid properties,corners should be uniformly curved, final surface should be non corrosive to biological fluids, detergents etc. all complete as per the instructions of Engineer In charge. The execution of item shall involve activities of cleaning the surface, grinding of the cleaned surface by manual or mechanical means, applying PU flooring primer on the complete surface followed by screed activity to level the complete surface and then followed by applying PU Topcoat. The items to be used shall be of make BASF/ENDURA/MYK failing which the make approved by Engineer-in Charge shall be used. The work is to be executed and completed all as per manufacturers specification and as per direction of Engineer-in Charge. 86 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 87 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 88 Using M.S. angels 40x40x6 mm for diagonal braces 89 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 90 In stringers, treads, landings etc. of stair cases, includinguse of chequered plate wherever required, all complete 91 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 92 10 x 120 mm 93 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 94 1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mmnominal size derived from natural sources) 95 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. 96 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 97 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 98 Providing and fixing 50 mm thick galvanised Puf panel of make Jindal/Tata/JSW on the walls and roof (size, shape and pitch of corrugation as approved by Engineer-in-charge) . The sheet shall be fixed using self drilling /self tapping screws of required size with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,including cutting to size and shape wherever required, Fixing operations of roof/wall panels shall be completed in all respect as per drawings and manufacturers specifications and under the overall direction of the Engineer-in-charge.Drawing and Layout of Puf Panel is to be submitted by the contractor for the approval of Engineer-in Charge. No separate amount is to be paid by the department to the contractor for drawing/layout 99 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit & accessories as required. 100 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 101 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 102 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 103 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 104 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 105 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 106 5/6 A switch 107 15/16 A switch 108 3 pin 5/6 A socket outlet 109 6 pin 15/16 A socket outlet 110 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 111 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 112 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 113 1 or 2 Module (75mmX75mm) 114 3 Module (100mmX75mm) 115 4 Module (125mmX75mm) 116 6 Module (200mmX75mm) 117 8 Module 118 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. 119 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 120 1 run of cable 121 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 122 100 A,30KA,FPMCCB 123 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 124 6 way (4 + 18), Double door 125 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 126 Single pole 127 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 128 63 A 129 Supplying and fixing TP&N MCB,440 volts, C curve, suitable for inductive load of following poles in the existing MCB DBcomplete with connections, testing and commissioning & accessories etc. as required. 130 63 A TP&N MCB 131 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. 132 For 6 way, Double door TPN MCBDB 133 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 134 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm). 135 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as required. 136 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 137 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 138 Supplying and fixing TP&N MCB,440 volts, C curve, suitable for inductive load of following poles in the existing MCB DBcomplete with connections, testing and commissioning & accessories etc. as required. 139 40 A 140 Supply and laying of3.5*50 Sqmm 1.1 kV grade PVC Sheathed XLPE insulated aluminium armoured cable. 141 Supply and Installation of Exhaust fan suitable for single phase, 230 volts, 50 Hz, AC supply having RPM 1100or better , 300 mm sweep, power input = 35W or less, Air delievery ≥ 700 CFM complete with motor, louvers/ shutters etc. as required in the existing window, includes dismembering of window glass, providing and fixing ACP panel (6mm thickness Aluminium composite panel) framing in place of glass, connection, testing, commissioning etc. as required. 142 Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) 143 18 watt 144 Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin),CM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 145 36 watt 146 Supplying and Installation of clean room recess mounted 600X600 mm, 30-34 watt LED luminaries with lumen efficiancy of >100 lm/W, dimming option, highly specular anodized aluminum reflectors, optical antiglare system, high effiency polycarbonate diffuser with EMC/EMI compliant electronic driver having PF>0.9, THD < 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. Luminaries cover should be made of highly resistant, disinfectant proof laminated, safety glass/acrylic with stylish fine-grained surface. The reflectors should be of high quality, cleanable and non-deteriorating. The Recess frames should be gas tight. The white luminaries body should be made of sheet steel, perfectly powder coated, supplied ready for connection optionally for individual or series circuit with digital electronic control gear in multilamp technology. The Light fitting should be flush with the ceiling and should be removable from top or bottom. Optional pre-set color temperatures or adjust to any CCT in the Productivity Range 3000 K - 5700 K, Dimming Range 10%-100%The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required. 147 Supply and Installation of 10 litre capacity Water Geysers in required locationequivalent to Jaquar model- EPM-WHT-V010* 10 liter capacity* Temperature Range:- 25-70ºC or better* Wattage:- 2KW or less* 5 star rating* suitable for single phase, 230 volts, 50 Hz, AC supply. 148 Supplying and Installation of 60 mm thick hermetically sealed single sliding door of ( 2.1 m (H) x 1.5m (W))/(2.1 m (H) x 1.8m (W)). The controller should be capable of being operated by elbow switches/ foot switches as well as touch less sensor. The track should be of Stainless steel/ Aluminum and the running surface for the top rollers should be suitably angled to reduce resistance to movement. The door material should be of HPL colour should match the interior and care should be taken to make the leaf strong and light weight.The door leaf should be hung by means of hard plastic rollers of high quality with double bearing at the top. Rollers should be provided under the stainless steel/ Aluminum track to enable smooth and noiseless movement. Opening and closing of the door should be microprocessor controlled electromechanical movement. One should be able to open and close the door effortlessly in case of failure of automatic mechanism. Door opening handle should be of SS (gloss finish), i/c high quality cylindrical lock. Door leaf should have high quality synthetic rubber gasket with long life to ensure hermetic sealing, Air tightness 99.99% at a pressure of 100KPa. The finished floor on either side of the door should be perfectly level (maximum permissible difference +1mm). The overall thickness of the finished door should be of 60mm. The inner part of the door should be filled with CFC free polyurethane foam. (Sealed airtight to prevent further ingress of any microbial organism). The door and controls should comply with IEE regulation. All motors used should be DC brushless motors with essential isolation from mains. All motors used should be DC brushless motors with essentíal isolation from mains. Door should be with vision window 300 mm x 300 mm with double glazed panels and hermetically sealed motorized roller blind inside. The starting time after receiving the signal shauld be adjustable between 0.5 to 20 seconds. The complete door assembly should be BIS/ European CE marked/ US FDA approved. Test certificate for hermetically sealed door frame (factory test certificate) should be enclosed with the pre dispatch documents.Hermatically Sealed HPL finish DOOR - Automatic with automation,Supply, Installation, Testing of automatic sliding hermatically OT door size of with Double sided wall frame with HPL Plank 400mm.1- Door Profiles- Aluminium Alloy, Grade 6063, Temper T6. Natural Anodized 20 μm.2-PIR. Dimensional stability at +100°C & -25°C (2%max).Density 41Kg/M3 with max deviation of 2kg/m3 as perDIN53420.3- Door Skin- HPL (4mm) both side of door4- Sealing Gasket (Sides and Top)- Replaceable Bulb and Lip design EPDM gasket.5- Sealing Gasket(Bottom)- .Replaceable Special lower sealing EPDM gasket.6-. Vision Panel- Double Glazed IG unit with 5mm tempered glass on both sides. Size = 300 mm x 300 mm x 60mm.7-Lever Handle- Solid AISI 304 Grade Stainless Steel with rubber spring system.8- Rail System- 6mm deep indentations with ‘down and in’ movement at the angle of 45⁰.9- Rollers- Special Grade Self-lubricating PA Bearings: 2X per roller.10-Wall Frame- Aluminium Alloy, Grade 6063, Temper T6 Natural Anodized 20 μm.11- Planks- HPL Planks finished with compact laminates are used to cover the door opening.12- Noise Insulation-28 dB.13- Air Permeability- Air Leakage at ± 100 Pa (pressure difference) = 0.07 m³/h.m. 1-Microprocessor Based controller. (230 Vac, 750 W (max),2- motor, IP65 protection Class, 20 Nm, 3Øx230V. (CE Marked).3- If an obstruction is present and prevents the door from closing, the intelligent automation sense with self reversal function thus eliminatingthe need for an ugly safety strip.4- Additional safety is provided by means of a photo cell fitted across the door opening.5- Variable options for the opening and closing speeds, time delay closing and part opening for pedestrian use and are easy to adjust.6- A self diagnostic coded system makes fault finding simple, reducing expensive down time.7- Magic (Hand) Switch- The spread of infection is controlled by automating the doors with touch less sensors allowing hands free operation.8- Foot switch or Elbow Switch- AISI 304 grade Stainless Steel Foot Switches with high quality inductive sensors.Control: Microprocessor-controlled with Deceleration Measurement System sliding door drive.Power supply: 230 Vac +10% / -15%. Frequency: 47-63Hz . Power Consumption -Maximum : 750 W.Drive :STG motor. Nominal Motor power:90 W, High Torque Motor -20Nm.Microprocessor controlled motor driver. Max. door weight : 350 Kg.Adjustable Speed Control level: 1-9 . Slow speed (V slow) :20(Threshold speed) - 120 mm. / sec.Starting speed (V start) :20(Threshold spped) - 220 mm. / sec. Opening speed (V open) :Threshold speed to 800 mm. / sec. Closing speed (Vclose):Threshold speed to 400 mm. / sec.Pedestrian opening (Half Opening width) :10% - 99% of the available door opening. 149 Supply ,Installation,Testing & Commissioning of factory built cabinet type unit withAl anodised thermal break frame structure injected with minimum 45+-5 mm thick PUFinsulation, GIPanelshallbepowdercoatedfrombothinnerandouterside,evaporationDxcoil expansion valve and corded remote ,Fan section with double width double inlet (DIDW backwards curved) centrifugal fan with Variable speed Fan Motor with VFD, prefilter section with EU3 / G4 class filters & EU-7 Filter(As per Approval of Engineer Incharge ) Dx coil.units shall be with a remote controller as per site requirement. Rating for the AHUs shall be as under - Motor selection (IE-3) to suit the below capacity AHU ratings. AHU shall be mounted on floor/Ceiling Mounted with vibration isolatorsUnit shall be with factory fitted inlet/outlet aluminium Aerofoil dampers. ,Temperature controller ,Door open switch ,pressure drop across filters ,Fan motor over load protector ,Suitable UV System Chamber complete with cable /wiring etc. will be part of this AHU Unit. AHUShouldhave1setofSpareFiltersapartfromCommissioningfiltersfixedinAHU. SuitableCommunication cable from indoor to outdoor is in the scope of agency .Double Skin Heater Bank Chamber comprising of SS 304 spiral strip heaters fitted with Porcelene blocks, Safety air stat & access door for heater rating , UVGI Lamp etc. As per per approved design from Engineer Incharge. AHU connection Kit with Control box (expansion valve ), Control Box,Nitrogen Testing ,Vaccuming , Green Refrigerant Top up .It should be equiped with Controler to control humidity up to 55 % (+-5%).AHU Machine should be Equipped withmotorised Fire Dampers .F.M./S.A Fan 4000 CFM /18 TR(24 HP) X 2 Numbers Coils / 6 ROW coil Full Copper , with two Stage Filter level 10 micron + 5 Micron,ESP-150 MM in WC. Design parameter- Temp.-21+-3 Degree Centigrade , Relative Humidity -55+-5% 150 Supply, Installation, Testing & Commissioning of 22 HP modular type variable refrigerant flow / Variable regrigerant Volume air cooled outdoor units suitable for cooling and heating having all hermatically sealed inverter type scroll compressor, minimum two compressor for above 14 HP modules, microprocessor based controller,top discharge type condensing units, with R410 A refrigerant, Vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 degree Celcius ambient temperature without tripping. The unit shall be suitable to work on 400+/-10%, 3phase , 50 Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required with suitable communication cable. The COP at AHRI Conditions shall not be less than 3.1 and IEER not less than 6.5. 151 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 152 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm 153 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm 154 Supplying and installing 225 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 155 Supply, installation, balancing and commissioning of Site fabricated Aluminium 0.80 mm rectangular/Circularducting as requiredwith supports as per IS 655-2006 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following gauges (Galvanizing shall be with zinc nominal 120 gm/sqmtr) includes cutting/ dismanteling of wall (if required) and make good the same.Note: Fabrication and jointing of duct shall be as per IS standard and hanging shall be as per SMACNA. 156 Thickness 0.80 mm sheet 157 Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. 158 Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. 159 Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. 160 Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. 161 Fire Damper 162 Actuator 163 Supply and fixing of acoustic lining of AHU wall and ceiling with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to wall and ceiling with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications. 164 Supplying and fixing of 19 mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class O) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 165 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge for Drainage. 166 32 mm nominal dia. 167 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit,fitting as required. 168 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 169 Supply ,Fixing and erection of Duct rexin Fire Retardent Canvass Connections with Vibration & Isolation Pad complete as required . 170 Supplying and fixing of MS of (40X40X5)mm stand for condensing (Outdoor) with epoxy painting, unit Size - 1040 mm(L)*440mm(W)*300(H)} . 171 8 SWG (Copper ) Earthing Cable Supply & Fixing complete as required . 172 Supply and fixing of 10 mm Open cellacoustic insulation of supply air duct and plenum with fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per direction of Engineer Incharge AIIMS Raipur. 173 Supplying, fixing, testing and commissioning of Hepa Filter of required Specification withincluding making arrangement for fixing complete as required and as per direction of Engineer-in-charge.Class-14,Efficiency -99.97 174 Supplying, fixing, testing and commissioning of 1 Tile Membrane Surgeon Control Panel of following Specification including making arrangement for fixing with necessary acessaries ,Cable etc. complete as required and as per direction of Engineer-in-charge. 175 Supplying, fixing, testing and commissioningofmotorised damper as required Specification withnecessaryarrangementas per direction of Engineer-in-charge. 176 Supply and fixing ofinsulation work with 6 mm nitrile rubber on existing CPVC drain pipe(32 MM) properly as required. 177 Supply, Installation and Testing of G I Sheet with Galvanized Coating cable tray cover for 225 mm powder coating M.S. cable trays it is highly durable and robust , corrosion and can sustain high load andincluding bolts & nutsall accessories as per specifications etc. as required. 178 Supplying, installation, testing and commissioning of M.V/LT. cubical type totally enclosed dust and vermin proof Floor/Wall mounted Sub Main Distribution Boards suitable for use on 430 V 3 phase 4 wire 50 Hz AC supply, having compartmentalized construction for different incoming/outgoing MCCBs from Approved Make, and separate bus bar & cable alleys , fabricated from min 1.6mm thick CRCA sheet steel of uniform width complete with copper bus bars , MV/LT danger notice plate, Digital type ammeter with Ammeter selector switch , voltmeter with Voltmeter selector switch , LED indicating lamps, cast resin CTs , Confirms to IEC-61439-2, IP-43, Interconnection with suitable capacity copper strips / rods, connection of incoming and outgoing cables with thimbles , smoke/Siemens grey colour stove enamelled painted and having following incoming and outgoing switchgears, 2 earth bolt, removable cable gland plate with spare suitable hole, wall/floor mounted, lockable using hollow standard LT Panel lock key complete as per site required or as approved by Engineer In-charge. A. INCOMER 01 nos. 250amps 35kA TPNL MCCB from Approved Make Thermo-magnetic release type with rotary handle. 01 nos. Digital type single function volt meter to show 0-500V voltage with phase selector switch01 nos. Digital type single function ameter to show amperage with phase selector switch 03 Nos Energy Meter 03 Nos CTs 125/5 ratio 03 LED Indication Light with toggle switches B. OUTGOING 08nos. 40A TPNL MCCB (25 KA) Thermo-magnetic release type. 179 Dismentlingwork of Existing installed duct, FCU, HVAC Pipelines, Starter Panelincluding Welding, Cutting as required as per direction of Engineer Incharge AIIMS Raipur. 180 Supplying, installation, testing & commissioning of smokedetector with builtin LED and mounting base complete with all connections etc. as required. 181 Supplying,installation,testing&commissioningofmanualcallboxesofMS constructionin surface/recesswithstainlesssteelchain&hammerassembly complete with glass and push button etc. as required. 182 Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. 183 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. 184 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered along with battery arrangement for power backup complete with all connections, interconnections as required. 185 4 Zone 186 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 187 Supply and fixing of 4 kg clean agent (HCFC) portable fire extinguisher having pressure guage indicator and arrangement for wall hangingand with warranty for 5 years on complete product. 188 Providing and fixing you are here sign board near entrance and fire reflective sign board, reflective stickers signage for indication at fire doors, fire extinguisher, fire exit with suitable size as per requirement and as per instruction from Engineer In-charge.
Contract Date: Apr 16, 2026 Contract Value : 1.09 Crore
Government Departments No of Bidders 4
Chhattisgarh View Result →
48.
Defence #9993545 AOC
Bids Are invited for Full Plates Bone China - Full Plates Bone China With Drdo Monogram All As Spd , Quarter Plate Bone China - Quarter Plates Bone China With Drdo Monogram All As Spd , Curry Bowls Bone China - Curry Bowls Bone China With Drdo Monogram All As Spd , Cup And Saucer - Cup And Saucer Bone China With Drdo Monogam All As Spd , Water Glasses - Water Glasses Stainless Steel All As Spd , Ash Tray - Ash Tray Stainless Steel All As Spd , Thermus Flask - Thermus Flask Stainless Steel 500 Ml All As Spd , Hot Case Large - Hot Case Large Stainless Steel 5000 Ml All As Spd , Bucket - Bucket Plastic 25 Liters All As Spd , Drum - Drum Plastic All As Spd , Bath Mat - Bath Mat Plastic For Bath Door All As Spd , Table Spoon - Table Spoon Stainless Steel Material All As Spd , Tea Spoon - Tea Spoon Stainless Steel Material All As Spd , Service Spoon - Service Spoon Stainelss Steel Material All As Spd , Rice Spoon - Rice Spoon Stainless Steel Material All As Spd , Rice Plates - Rice Plates Stainless Steel Material All As Spd , Water Jug - Water Jug Stainless Steel All As Spd , Casserole Stainless Steel - Casserole Stainless Steel 2 Liters All As Spd , Casserole Stainless Steel - Casserole Stainless Steel 1 Liters All As Spd , Steel Almirah - Steel Almirah 03 Shelves All As Spd , Mug - Mug Plastic For Bathroom Uses All As Spd , Dustbin - Dustbin Plastic Large 40 Ltrs With Lid All As Spd , Mattress - Mattress For Single Bed All As Spd , Pillow Fiber - Pillow Fiber Material All As Spd , Single Bed Sheet - Single Bed Sheet (02 Bs02 Pc) All As Spd , Quilt Single - Quilt Single Size 220X150 Cm All As Spd , Quilt Cover Single - Quilt Cover Single All As Spd , Blanket Single - Blanket Single Size230x152 Cm All As Spd , Bath Towel Large - Bath Towel Large Size 75 Cm X 150 Cm All As Spd , Door Mat - Door Mat 900Mm X 300Mm Material Soft Coir All As Spd , Foot Mat Rubber - Foot Mat Rubber All As Spd , Door Mat - Door Mat 1200X900mm Material Soft Coir All As Spd , Door Mat - Door Mat 1
Contract Date: Ref. Documents Contract Value : 1.92 Lakh
Government Departments No of Bidders 11
Uttarakhand View Result →
49.
Steel #9917255 AOC
Bids Are invited for Hydrochloric Acid Ar - As Mentioned In Atc , Sulphuric Acid 98 Percentage Ar - As Mentioned In Atc , Orthophosphoric Acid 85 Percentage Ar - As Mentioned In Atc , Aetic Acid Glacial Ar - As Mentioned In Atc , Sodium Hydroxide Pellets Ar - As Mentioned In Atc , Ammonium Acetate Ar - As Mentioned In Atc , 8 Hydroxyquinolin Ar - As Mentioned In Atc , Hydroxyl Amine Hydro Chloride Ar - As Mentioned In Atc , Sodium Carbonate Ar - As Mentioned In Atc , Di-Sodium Tetraborate Borax Ar - As Mentioned In Atc , Sodium Thiosulphate Ar - As Mentioned In Atc , Ammonia Solution Ar - As Mentioned In Atc , Calcium Carbonate Anal R - As Mentioned In Atc , Possaium Bromide Ar - As Mentioned In Atc , Possaium Bromate Ar - As Mentioned In Atc , Bromo Cresol Green - As Mentioned In Atc , Barium Diphenyl Amine Sulphonate Ar - As Mentioned In Atc , Beaker 600 Ml - As Mentioned In Atc , Beaker 500 Ml - As Mentioned In Atc , Beaker 100 Ml - As Mentioned In Atc , Buratte 100 Ml By 10Mm Dia - As Mentioned In Atc , Buratte 50 Ml By 10Mm Dia - As Mentioned In Atc , Buratte 10 Ml By 8Mm Dia - As Mentioned In Atc , Stainless Steel Tongs 8 Inch - As Mentioned In Atc , Stainless Steel Tongs 10 Inch - As Mentioned In Atc , Watch Glass 100Mm Dia - As Mentioned In Atc , Plastic Tongs Heat Resistance 6 Inch - As Mentioned In Atc , Watch Glass 30Mm Dia - As Mentioned In Atc , Circular Lifting Magnet Dia 50Mm And 10 Mm Thickness - As Mentioned In Atc , Hydrometer 1 Point 000 2 Point 000 Sp Gr - As Mentioned In Atc , Enamel Tray 10 Inch Into 12 Inch - As Mentioned In Atc , Enamel Tray 12 Inch Into 18 Inch - As Mentioned In Atc , Enamel Bowl 6 Inch - As Mentioned In Atc , Enamel Bowl 8 Inch - As Mentioned In Atc , Silica Ash Dish 20 Ml 50 Mm Into 16 Mm - As Mentioned In Atc , Funnel 100Mm Dia - As Mentioned In Atc , Funnel 75 Mm Dia - As Mentioned In Atc , Measuring Cylinder 100 Ml - As Mentioned In Atc , Thermometer 0 To 150 Deg Centigrade - As Mentioned In Atc , Spatula Sainless Steel
Contract Date: Ref. Documents Contract Value : 93,351
Boards / Undertakings / PSU No of Bidders 9
50.
Civil Aviation #9912282 AOC
Tender For Har-Ki-Pauri Revitalisation (Haridwar)- 1 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 2 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 3 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand), Including Pointing With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) With An Admixture Of Pigment To Match The Shade Of Stone 4 Red Sand Stone 5 Extra For Pre Finished Nosing In Treads Of Steps Of Kota Stone/ Sand Stone Slab. 6 Providing & Laying Of Makrana White Marble Superior Quality Stone Flooring With 40 Mm Thick, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Grey Cement Slurry, Including Rubbing And Polishing Complete. 7 40 Mm Thick Makrana Marble White Superior Quality 8 Providing And Laying 40 Mm Thick Granite Z-Black Superior Quality Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 40 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 9 40 Mm Thick Granite Z-Black Superior Quality 10 Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: 11 Channels, Angles, Tees And Flats 12 Dismantling Steel Work Manually/ By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Metres Lead As Per Direction Of Engineer-In-Charge 13 Demolishing R.C.C. Work By Mechanical Means And Stockpiling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead Of 1 Kilometre, Stacking Serviceable And Unserviceable Material Separately Including Cutting Reinforcement Bars 14 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 15 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 16 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : 17 Foundations, Footings, Bases For Columns 18 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purposes Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). 19 Providing And Fixing Isi Marked Ss Tower Bolt (Plate Type) With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378): Size 200X10Mm 20 Providing And Fixing Stainless Steel Door Latch With Necessary Screws Etc. Complete :: Size 300X16Mmx5Mm 21 Providing And Fixing Stainless Steel ( Grade 304) 6Mm Dia Solid Chain Made Of Soild Rod Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing & Pcc/Rcc With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Under Of The Floor Or The Side Of Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purposes Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). 22 Drilling Suitable Holes In Reinforced Or Plain Cement Concrete With Power Driven Drill Machine To A Minimum Depth Of 100 Mm Upto 200 Mm In Rcc Beams, Lintels, Columns And Slabs To Introduce Steel Bars For Sunshades/ Balconies Including Fixing The Steel Bars In Position Using Epoxy Resin Anchor Grout Of Approved Make But Excluding The Cost Of Reinforcement, All Complete As Per Direction Of Engineer-In-Charge. 23 Upto And Including 12 Mm Dia. 24 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 25 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived Fromnatural Sources : 3 Graded Stone Aggregate 20 Mm Nominalsize Derived From Natural Sources) 26 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 27 Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. 28 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 29 Thermo-Mechanically Treated Bars Of Grade Fe-500D Ormore. 30 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 31 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content. 32 With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre 33 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 34 New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) 35 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. 36 All Kinds Of Soil 37 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth,Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth,Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto 1.5 M. 38 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. 39 All Works Upto Plinth Level 40 Concrete Of M35 Grade With Minimum Cement Content Of 370 Kg /Cum 41 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 42 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete 43 Suspended Floors, Roofs, Landings, Balconies And Accessplatform 44 Stairs, (Excluding Landings) Except Spiral-Staircases 45 Construction Of Embankment With Material Obtained From Borrow Pits Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 46 For Additional 19 Km Carriage.For Above Item No.3-4 (Mord) 47 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres) 48 Steel Work In All Types Of Sections Upto A Height Of 5 M Above Plinth Level Excluding Cutting Of Rivet. Including Dismembering 49 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres) 50 Lime /Cement Concrete: By Mechanical Means For Items No. 2.04( B) & ( C): Cement Concrete Grade M-15 & M-20 51 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres) Lime /Cement Concrete: By Mechanical Means For Items No. 2.04( B) & ( C): Prestressed / Reinforced Cement Concrete Grade M-20 & Above. 52 Plain Cement Concrete 1:3:6 Nominal Mix In Foundation With Crushed Stone Aggregate 40 Mm Nominal Size Mechanically Mixed, Placed In Foundation And Compacted By Vibration Including Curing For 14 Days. 53 Furnishing And Placing Reinforced/Prestressed Cement Concrete In Super-Structure As Per Drawingand Technical Specification 54 Rcc Grade M25: Using Batching Plant, Transit Mixer And Concrete Pump: For Solid Slab Super-Structure, Height 5M To 10M 55 Supplying, Fitting And Placing Hysd Bar Reinforcement In Super-Structure Complete As Per Drawing And Technical Specifications 56 Providing And Laying 40Mm Sand Blasted (Lakshmi Brown) Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 40 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : 57 Providing And Laying Sand Blasted (Sera Grey) Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18-20 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : 58 Providing And Laying Sand Blasted (Steel Grey) Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18-20 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : 59 52 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 40 Mm Thick Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) And Top Layer 12 Mm Thick Cement Hardener Consisting Of Mix 1:2 (1 Cement Hardener Mix : 2 Graded Stone Aggregate 6 Mm Nominal Size) By Volume, Hardening Compound Mixed @ 2 Litre Per 50 Kg Of Cement Or As Per Manufacturer’S Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 60 Rubbing On Existing Stone Flooring And Filling Of Grooves With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) Admixed With Pigment To Match The Shade Of Stone Etc. Complete In All Respect As Per Direction Of Engineer-In-Charge. 61 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 62 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 63 Protection To Substructure By Using Coal Tar Epoxy-Providing And Applying Two Coats Of Two Comonent,High Build,100% Solid Content,Low Voc,Polycyclin, Aromatic Hydrocarbon Based,Pot Life2Hrs@72 Degreef,Tack Free-4-6 Hrs,Dft Per Coat 80-120 Microns(Dry) Coal Tar Epoxy Coating With Coal Tar. 64 Finishing Walls With Water Proofing Cement Paint Of Required Shade : 65 New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) 66 Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 67 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 68 Finishing With Epoxy Paint (Two Or More Coats) At All Locations Prepared And Applied As Per Manufacturer’S Specifications Excluding Appropriate Priming Coat, Preparation Of Surface, Etc. Complete 69 On Steel Work 70 Extra For Making Chequers Of Approved Pattern On Cement Concrete Floors, Steps, Landings, Pavements Etc. 71 Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 72 In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete 73 Plastering With Cement Mortar (1:4), 15 Mm Thick On Brickwork In Substructure As Per Technical Specification Clauses 613.4 & 1204 74 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 75 Designing, Enlarging, Supplying, Execution, Transportation, Fixing And Installation Of 2 Panels At Har Ki Pauri, At Haridwarsize: 18Ft X 13Ft = 234 Sftwt: 280 To 300 Kgs Per Panelfasteners: 5’ – 24 To 30 Pcs 76 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Naturalsources, Portland Pozzolana / Ordinary Portland /Portland Slagcement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete. Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 1.10 Times Of The Specified Minimum Cement Content, The Contractor Shall Havediscretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. 77 All Works Above Plinth Level Upto Floor V Level 78 Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum 79 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 80 Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour : 81 New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Having Voc Content Less Than 50 Gram/Litre 82 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : 83 Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 84 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. 85 Ordinary Rock (5% L.S) 86 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. 87 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 88 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 89 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement: 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stoneaggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75Mmthick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation,Levelling & Dressing & Finishing The Top Smooth. 90 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Naturalsources, Portland Pozzolana / Ordinary Portland /Portland Slagcement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete.Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 1.10 Times Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. 91 5.33.1 All Works Upto Plinth Level 92 Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum 93 All Works Above Plinth Level Upto Floor V Level 94 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 95 Columns, Pillars, Piers, Abutments, Posts And Struts 96 5.30 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. 97 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 98 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 99 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:6 (1 Cement: 6 Fine Sand) 100 12 Mm Cement Plaster Of Mix : 101 1:6 (1 Cement: 6 Fine Sand) 102 Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/Window/Clerestory Windows & Other Frames/ Chowkhat Comprising Of Virgin Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modulus Of Elasticity 900 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With M.S Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In- Charge. (M.S Hold Fast/Lugs Or Ss Dash Fasteners Shall Be Paid For Separately).Note: For Wpc Solid Door/Window Frames, Minus 5 Mm Tolerance In Dimensions I.E Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account Shall Be Made. 103 Frame Size 65 X 125 Mm 104 Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of Required Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/Cum And Screw Withdrawal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N/Mm2, Modulus Of Elasticity 850 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-In- Charge. (Note: Stainless Steel Butt Hinges And Necessary S.S Screws Shall Be Paid Separately) 105 35 Mm Thick 106 Providing And Laying Four Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First And Third Courses Of Blown Bitumen 85/25 Or 90/15 Conforming To Is : 702 Applied Hot @ 1.45 Kg Per Square Metre Of Area For Each Course, Second Course Of Roofing Felt Type 3 Grade-I (Hessian Based Self Finished Bitumen Felt) And Fourth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Square Metre, Including Preparation Of Surface But Excluding Grading Complete With : 107 Bitumen Felt (Hessian Base) Type 3 Grade I Conforming To Is : 1322 108 Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) 109 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) 110 Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) 111 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge .(Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): 112 With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) 113 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 114 Providing And Fixing Aluminium Round Shape Handle Of Outer Dia 100 Mm With Ss Screws Etc. Complete As Per Direction Of Engineer-Incharge 115 Anodized (Ac 15 ) Aluminium 116 Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Chromium Plated Brass Screws Etc. Complete. 117 50X40X2.5 Mm (Ordinary Type) 118 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 1 0 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete: 119 200X10 Mm 120 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete 121 Size Of Tile 600X600 Mm 122 Supplying & Erection Of Porta Cabin Consist Of With 1 Room Only Size 3.05M X2.44Mx 2.59M As Per Design, Drawing & Specifications Complete In All Respect And Direction Of Engineer-In-Charge. 123 Supply, Installation, Testing & Commissioning Of Door Metal Detector 16 Zones Size As Per Design/Drawing/Specifications Complete In All Respect And Direction Of Engineer-In-Charge. Etc. Compelte In All Respect And Direction Of Engineer-In-Charge. 124 Supply, Installation, Testing, And Commissioning Drinking Water Atm Reverse Osmos Is (Ro) 100 500 Lph Specifications As Per Manufacture, Etc. Complete In All Respect As Per Direction Of Engineer-In-Charge. 125 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 126 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 127 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) 128 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres)By Mechanical Means For Items No. 2.04( B) & ( C): Dismantling Stone Masonry By Manual Means 129 Rubble Stone Masonry In Cement Mortar. 130 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres)By Mechanical Means For Items No. 2.04 (Iii) 131 Dismantling Brick / Tile Work/ Rubble Masonary/ Pitching/ Etc By Mechanical Means 132 With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works 133 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 134 Two Or More Coats On New Work 135 White Washing With Lime To Give An Even Shade : 136 Old Work (Two Or More Coats) 137 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 138 Old Work (Two Or More Coat Applied @ 1.67 Ltr/ 10 Sqm) On Existing Cement Paint Surface 139 Repair Of Steel Railing To Bring It To Original Shape Cleaning And Repainting As Per Drawing And Technical Specification Clause 1911 140 Portable Barricade In Construction Zone (Installation Of A Steel Portable Barricade With Horizontal Rail 300 Mm Wide, 2.5 M In Length Fitted On A A Frame Made With 45 X 45 X 5 Mm Angle Iron Section, 1.5 M In Height, Horizontal Rail Painted (2 Coats) With Yellow And White Stripes, 150 Mm In Width At An Angle Of 450, A Frame Painted With 2 Coats Of Yellow Paint, Complete As Per Irc:Sp:55-2001 ) 141 Making Sleeves And Cut-Outs In Rcc Walls, Beams And Slabs Of Any Shape And Size By Way Of Core Cutting As Per Requirement Ofarchitectural Instructions Inluding Necessary Tools And Machinaries, Scaffolding, Watering, Rate Also Included Carting Away The Debris From Site Time To Time Or Disposing The Material As Directed And Specified By The Architect / Client Core Cutting Width 400Mm And Depth=300Mm To 600Mm As Per Direction Of Engineer. 142 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvcmedium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hireand Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Ofengineer -In-Charge. 143 100Mm Diameter 144 200Mm Diameter 145 Constructing Masonry Chamber 30X30X50 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) For Stop Cock, With C. I.Surface Box 100X100 X75 Mm (Inside) With Hinged Cover Fixed In Reinforced Cement Concrete Slab 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand : 3 Gradedstone Aggregate 20 Mm Nominal Size), Including Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stoneaggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design :With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Classdesignation 7.5 146 Constructing Masonry Chamber 60X60X75 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mmdeep ( Inside) With Chained Lid And Rcc Top Slab 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size), Includingnecessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5 147 Constructing Masonry Chamber 120X120X100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Rcc Top Slab 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size), Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : 148 Demolishing R.C.C. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. 149 Supplying ,Installation , Testing , Commissioning Of Vertical Position Submersible Sewage Dewatering Unclog Pump Set For Capacity 05 Hp / 1450 Rpm , Ac 3 Ph , 440V , 50 Hz Having 100 Mm Delivery , Head 12 Meter , Discharge 500 Lpm With Cutter Plate , Sewage / Solid Handling Capacity Size 40 Mm Along With Control Panel ,15 Meter 100 Mm Pvc Hose , C.I. Bends And 15 Meter Submersible Cable Etc. 150 Supplying And Installing Pressure Gauge Of 100 Mm Ø., 0-300 Psi Or 0-21 Kg Per Cm Square Fitted With 12/15 Mm Ø. Pad Cock Valve, And G.I. Pipe, Elbow Etc. As Per Requirement In Approved Manner. 151 Supply, Erection, Jointing, Testing & Commissioning Of \C\ Class Ms Pipes (As Per Is: 1239) Including Necessary Specials Such As Tees, Bends, Flanges Reducers Etc., Complete On Wall/ Ceiling. The Pipes To Be Erected On Wall Or Suspended From Beams, Rcc Roof Slabs With Suitable Size Ms Bars/ Angle Irons Including Painting Of Metal Part Except Pipe Line. 152 80Mm Dia. 153 100Mm Dia. 154 Painting (Two Or More Coats) On Rain Water, Soil Waste And Vent Pipes And Fittings With Aluminium Paint Of Approved Brand And Manufacture Over A Priming Coat Of Ready Mixed Zinc Chromate Yellow Primer On New Work : 155 75 Mm Diameter Pipes 156 100 Mm Diameter Pipes 157 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertions Etc. (The Tail Pieces If Required Will Be Paid Separately) : 158 Sluice Valve/Scour Valve 159 100 Mm Dia. Pn-1.6. 160 Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 161 80 Mm Dia. (Class -Pn 1.0 Rating) Flanged Type 162 Providing & Fixing Following Cast Iron Double Acting Air Valves, Flanged Without Inbuilti Solating Valve As Per Is : 14845-2000 Including Jointing &Testing With Cost Of Jointing Material And Rubber Insertion All Complete Asper Is :13095-1991 163 80 Mm Dia Pn-1.6 164 Providing, Laying, Jointing, Testing And Commissioning Of Brass/ Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) All Complete As Per Technical Specifications And As Per Direction Of Engineer. 165 32 Mm Nominal Bore 166 Excavation For Structures (Earth Work In Excavation Of Foundation Of Structures As Per Drawing And Technical Specification, Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Matter, Dressing Of Sides And Bottom, Backfilling The Excavation Earth To The Extent Required And Utilising The Remaining Earth Locally For Road Work.) 167 Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth. Mechanical Means 168 Plain/Reinforced Cement Concrete In Sub-Structure Complete As Per Drawing And Technical Specifications 169 Rcc Grade M35 170 Height Upto 5M With Batching Plant, Transit Mixer And Concrete Pump 171 Supplying, Fitting And Placing Un-Coated Hysd Bar Reinforcement In Foundation Complete As Per Drawing And Technical Specifications 172 Filler Joint: Providing & Fixing 20 Mm Thick Compressible Fibre Board In Expansion Joint Complete As Per Drawing & Technical Specification 173 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigmentmatching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 174 Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing.40 Mm Thick 175 Construction Of Rock Fill Embankment With All Lifts And Lead Upto 5 Km- Construction Of Rock Fill Embankment From Roadway Excavation With Broken Hard Rock Fragments Of Size Not Exceeding 300 Mm Laid In Layers Not Exceeding 500 Mm Thick Including Filling Of Surface Voids With Stone Spalls, Blinding Top Layer With Granular Material, Rolled With Vibratory Road Roller, All Complete As Per Clause 313 176 Supplying, Fitting And Placing Un-Coated Hysd Bar Reinforcement In Foundation Complete As Per Drawing And Technical Specifications. 177 Supplying, Fitting And Placing Hysd Bar Reinforcement In Sub-Structure Complete As Per Drawing And Technical Specifications 178 Plain/Reinforced Cement Concrete In Open Foundation Complete As Per Drawing And Technical Specifications 179 Pcc Grade M15 180 With Batching Plant, Transit Mixer And Concrete Pump 181 Providing Weep Holes In Brick Masonry/Plain/Reinforced Concrete Abutment, Wing Wall/Return Wall With 100 Mm Dia Ac Pipe, Extending Through The Full Width Of The Structure With Slope Of 1V :20H Towards Drawing Foce. Complete As Per Drawing And Technical Specifications 182 Providing And Laying Of Filter Media With Granular Materials/Stone Crushed Aggregates Satisfying The Requirements Laid Down In Clause 2504.2.2. Of Morth Specifications To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Provided Over The Entire Surface Behind Abutment, Wing Wall And Return Wall To The Full Height Compacted To A Firm Condition Complete As Per Drawing And Technical Specification. 183 Gabian Structure For Erosion Control, River Training Works And Protection Works (Providing And Constructing Gabain Structures For Erosion Control, River Training Works And Protection Works With Wire Crates Of Size 2 M X 1 M X 0.3 M Each Divided Into 1M Compartments By Cross Netting, Made From 4 Mm Galvanised Steel Wire @ 32 Kg Per 10 Sqm Having Minimum Tensile Strength Of 300 Mpa Conforming To Is:280 And Galvanizing Coating Conforming To Is:4826, Woven Into Mesh With Double Twist, Mesh Size Not Exceeding 100 Mm X 100 Mm, Filled With Boulders With Least Dimension Of 200 Mm, All Loose Ends To Besecurely Tied With 4 Mm Galvanised Steel Wire.) 184 Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media Including Boulder Apron Laid Dry In Front Of Toe Of Embankment Complete As Per Drawing And Technical Specifications 185 Stone/Boulder 186 Geotextile Filter (Laying Of A Geotextile Filter Between Pitching And Embankment Slopes On Which Pitching Is Laid To Prevent Escape Of The Embankment Material Through The Voids Of The Stone Pitching/Cement Concrete Blocks As Well As To Allow Free Movement Of Water Without Creating Any Uplift Head On The Pitching.) 187 Sitc Of 20W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 20W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >400Mm. 188 Sitc Of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 189 Sitc Of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 150W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 190 Sitc Of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip67, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. 191 Sitc Of Aluminium Profile For Neon Flex 192 Sitc Of Porta Cabin Ms Structure Base Frame \C Channel Of Size 50X100X50Mm With Ms Tubular Pipe Of 75X40Mm,50X50Mm & 25X 25Mm Interconnecting Ms Pipes 6 Raised Legs Of Size100X100Mm Corner Of Size 75X75Mm. Ms Cabin Rpcc Make Manufactured Using 19 Gauge With Inner Layer Of Action Teasa Laminated Mdf Board 6Mm Thick & Insulation Of Glass Wool. The Cabin Will Be Duly Painted Outside And Inside. These Are A Water Proof, Termite; Heat And Fire Resistant And Comfortable In Extreme Hot Or Cold Climate With Lifting & Shifting Arrangement. Window Size 3X3 Aluminum Bombay Sliding Glass Window With Ms Grill & Locking Arrangements & Rain Shed, Internal Wall Paneling Will Be Done By 6Mm Laminated Board, False Ceilling Will Be Done 6 Mm Laminated Board In Wooden Finish With Glass Wool Of Density 36Kg/M3. Flooring Will Be Done By 18Mm Cement Fiber Board With Lh Vinyl Flooring. Ms Door For Main Entrance With Locking Arrangement (Eldrop Only) All Electrical Fittings Of (Ancor/ Havells) Make Including Pvc Pipe With Internal Wiring (Ancor/ Havells) External Wiring Is Out Of Our Scope 1 Nos.Bulkhead Light (Outside), 4 No. Light Point, 4 No. Fan Point, 4 Nos. 6 Amp Switch & Socket (Extra), 1 No.32 Amp Mcb Box, 1 No. 16 Amp Ac Point Paint Will Be Done By Outside Enamel Paint Of Desired Color.Split Type Airconditioner 1.5 Ton, 3 Star Bee, Inverter Technology With Stablizer. 193 Sitc Of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 194 Sitc Of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 195 Sitc Of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 30W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Moulded Connector Having The Length >300Mm. 196 Sitc Of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv 197 Sitc Of High Quality Dmx Decoder, Power Input : Dc 24V, 198 Sitc Of Ip Driver Box Made Up Of Pvc / Upvc For The Internal Terminations And External Outgoing Connecting Points, With Required Pvc / Brass Glands, Optional Suitable Size Mcb Fitted For Control Outgoing Circuits. 199 Sitc Of Pvc Insulated Multi Core Electrical Un Armored Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) 200 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required 201 3C X 1.5 Sq.Mm 202 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required 203 3C X 2.5 Sq.Mm 204 Sitc Of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) 205 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 206 4C X 25 Sq.Mm 207 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With Allaccessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Iicomplete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required 208 90Mm Dia ( Od -90Mm & Id 76Mm Nominal ) 209 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along Withaccessories In Surface/Recess Including Cutting The Wall And Making Good Thesame In Case Of Recessed Conduit As Required 210 25Mmdia 211 Sitc Of Ip65 \I\ Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System \Quick Lock\ High Impact Materials - Long-Lasting And Reliable 212 Sitc Of Ip65 \I\ Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, \Solder Stop\ For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. 213 Sitc Of Dmx Signal Amplifier For Improving/Amplifying The Input Signals Through Longer Distances. 214 Sitc Of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. 215 Sitc Of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, \Solder Stop\ For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. 216 Sitc Of Power Main Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options.- 8 Nos Of 32A Tpn Mcb Outgoing McbS.- 1No Of 100A Tpn Incoming Mcb. 217 Sitc Of Sub Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options.- 12 Nos Of 6/10A Sp Outgoing McbS.- 1No Of 32A Tpn Incoming Mcb. 218 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Lockingarrangement And Watering Pipe Of 2.7 Metre Long Etc. (But Without Charcoal/Coke And Salt) As Required 219 Sitc Of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. 220 Earth Excavation Work For Cable Laying. 221 Sitc Of Programming Charges 222 Sitc Of Supplying And Erecting Iron Work, Sheet Metal Work Consisting Of Crca Sheets, Various Sections Of Iron, Plates, Chequered Plates, Rods, Bars, Ms Pipes, Etc. For Panel Board Or Any Other Purpose With Bending, Cutting, Drilling And Welding Complete Erected At The Position With Necessary Materials Duly Painted With One Coat Of Red Oxide And Two Coats Of Enamel Paint To Match The Switchgears. 223 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 224 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominalsize Derived From Natural Sources) 225 Sitc Of 9W Mono Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 09W, Cct : 1800/3000/4000/6000K, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 15º/25º/45º/60º, Control : On/Off, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Ac 110-230V, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. 226 Sitc Of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >400Mm. 227 Sitc Of 17W Mono Color Projector Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 17W, Cct : 1800/3000/4000/6000K, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 15º/25º/45º/60º, Control : On/Off, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V(External Driver) Or Ac 110-230V, 50Hz. Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Glare : Specially Designed Glare Free Round Shape 360 Deg / 3 Unit. Focussing Area/Led Will Be Kept 90 Deg Perpendicular Below The Glare Free Optic. Size Of The Led Optic & Glare Unit Must Be Equal Or +/-2% Higher To Achieve The Maximum Intensity And Less Glare. This Additional Arrangement Can Be Fixed Or Removed On The Application. Glare Free Optical Design For Human Viewing Angle From A Distance Within 2-3 Mtr. Toughened Transparent Glass Having The Ik Protection Up To Ik05 Sealed Above The Glare Free Unit. Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. 228 Sitc Of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 100W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 229 Sitc Of High Quality Multi Color Linear Profile Light, Protection Rating : Ip65, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 15W, Dimension :23Mm, Cct : Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Body : Extruded Aluminium With Milkwhite Diffuser, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Lm79, Ip65, From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Connector Having The Length >100Mm. 230 Sitc Of Gi Cage For Light Protection, Gi Cage Made Of Mesh With Back Openable Door And Suitable Hinges, Light Fixing Provision With Bolting Option, Base Concrete Foundation. 231 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 232 4C X 16 Sq.Mm 233 Sitc Of Factory Fabricated And Wired Metal Clad Dust And Vermin Proof Floor Mounting Panel Tpn Switchboard Complete. The Instrument Chamber Shall Be Separate And Shall Comprise A Multifunction Meter And Current Transformer Etc. The Board Shall Have Suitable Capacity Electrolytic Aluminum Bus Bars As Per Is:8623 Insulated With Heat Shrink Sleeving And Mounted On Non-Hygroscopic Supports Such As Cmc /Dmc Supports With Detachable Side Covers And Shall Be Suitable For An Extension On The Sides. The Switches Shall Be Complete With Cable And Boxes, Pedestal-Type Cable Socket Compression Glands And Indicating Lamps On Incoming Etc. The Power Panel Shall Be Fabricated With Crca Sheet With A Minimum Thickness Of 1.6Mm/2Mm With The Following Incoming And Outgoings Incoming Mccb-150Amp Tpn-01 Multifunction Meter-01 Ryb Indicators-01Set, Outgoing 63 Amp Tpn Mcb- 04 No, 10Amp Sp Mcb - 6Nos. 234 Sitc Of Sub Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options.- 22 Nos Of 6/10A Sp Outgoing McbS. - 1No Of 63A Tpn Incoming Mcb. 235 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. (But Without Charcoal/ Coke And Salt) As Required. 236 Sitc Of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory. Usb Connection • 2048 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. 237 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required 238 3C X 1.5 Sq.Mm 239 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 240 4C X 16 Sq.Mm 241 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Lockingarrangement And Watering Pipe Of 2.7 Metre Long Etc. (But Without Charcoal/Coke And Salt) As Required 242 Sitc Of Programming Charges 243 Supply, Installation, Testing & Commissioning Of - Double Arm7000Mm Pole Made Of Circular Mild Steel Pipe Of Two Section (Grade Yst 210), Bottom Section 139.7Mm Dia X 3.6Mm Thick With 1607Mm Height & Top Section 114.3Mm Dia X 3.2Mm Thick With 1858Mm Height. Decorative Base Made Of Gravity Die-Cast Aluminium (504Mm Dia X 1324Mm Height). Decorative Die Cast Aluminium Cone (230Mm Dia X 150Mm Height) Covered On The Both Section Joint Area. The Double Arm Pelican Orna Eva Bracket Is A Split Constructed Type, Bracket Stem Made Of Ms Pipe 60.3Mm Dia X 2.6Mm Thick, Emerging From A Split Collar Upto A Height 1379Mm Crowned At The Top With A Decorative Eva Made Of Gravity Die Cast Aluminium In Single Piece Of 682Mm Height. The Artistically Curved Double Arm Made Of Ms Pipe 38.1Mm X 2Mm Thick, Spruced Up With Ms Scroll With Gravity Die Cast Aluminium Leaf And Ms Floral Embellishment, Is Firmly Held To The Stem By Way Of Cast Iron Clamps And The Arm Bears Cast Iron Knobs At One End And Other End Facilitates The Fitment Of Pendant Luminaire At 890Mm On Either Sides From The Vertical Axis Of The Bracket Stem. Pole Section Welded By Certified Welders Using High End Mig Welding Processes. Pdc Aluminium Service Door 348Mm Height X 110Mm Width Shall Be Provided With The Company Logo Embossed On The Bottom Of The Door And Safety Rope. The Control Gear Tray Is Prewired With 2.5 Sq.Mm Cable, 6A Sp Mcb And 32A Ramanuj Stud Type 4 Way Terminal Block For Loop-In / Loop-Out Arrangement, 5A 2 Way Terminal Connector And Provision For Earthing. Any Other Internal Cables And Connections Shall Not Be Covered In The Scope Of Supply. Mild Steel Mounting Plate 300Mm Square X 16Mm Thick Steel Of Grade E250 To Is 2062 : 2011 With 4 Elongated Holes 48 X 24 To Suit M20 X 500Mm Bolts Of Grade 4.6 At Cc 215. The Base Plate Have A Cable Entry Hole As Per The Base Pipe Size. This Mounting Steel Plate Along With Foundation Bolts Of Suitable Size To Be Used For Ensuring Firm Grouting Into The Specially Designed Foundation. All Dimension Are Within +/- 5% Tolerance. The Pole Is Coated With Zinc Rich Primer & Pure Polyester Powder Coating Or Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint (Coating Thickness 60- 80 Microns). The Pole Shall Be Provided With Graphite Grey / Anthracite Grey / Black As Standard Colour Options. 244 Supply, Installation, Testing & Commissioning Of Input Power : 90W Ledtechnical Description Pendant Mounted Compact Street Light. Type Iv (Asymmetrical Light Distribution). Luminaire Made Of Specially Contoured Spun Aluminium Body Of High Corrosion Resistance With A Neck Design For Unique And Better Aesthetics And Non Corrosive Stainless Steel Fasteners. Clear Acrylic / Clear Polycarbonate Diffuser. The Luminaire Have Extruded Aluminium Heatsink For Thermal Management With Vertical Fin Design For Longer Life Of The Leds. The Mounting Arrangement Nipple, Coupling & Hex Nut Made Of Stainless Steel 304 Suitable For Mounting To Internally Threaded Pipe Of Designation M30. Protection Class Ip65. Mechanical Resistance Ik05 (Acrylic Diffuser) & Ik09 (Polycarbonate Diffuser). Pure Polyester Powder Coated Graphite Grey / Anthracite Grey / Jet Black. Available Colour Temperature 3000K / 4000K / 5700K, Colour Rendering Index (Cri)>70. K-Lite Led Module With Expected Service Life Of At Least 72,000 Operating Hours. Prewired With Led Driver And Suitable For Operating On 240V, 50Hz Single Phase Ac Supply. Driver Efficiency >85%, Power Factor >0.95, Thd 245 Supply, Installation, Testing & Commissioning Of - Single Arm7000Mm Pole Made Of Circular Mild Steel Pipe Of Two Section (Grade Yst 210), Bottom Section 139.7Mm Dia X 3.6Mm Thick With 1607Mm Height & Top Section 114.3Mm Dia X 3.2Mm Thick With 1858Mm Height. Decorative Base Made Of Gravity Die-Cast Aluminium (504Mm Dia X 1324Mm Height). Decorative Die Cast Aluminium Cone (230Mm Dia X 150Mm Height) Covered On The Both Section Joint Area. The Single Arm Pelican Orna Eva Bracket Is A Split Constructed Type, Bracket Stem Made Of Ms Pipe 60.3Mm Dia X2.6Mm Thick, Emerging From A Split Collar Upto A Height 1379Mm Crowned At The Top With A Decorative Eva Made Of Gravity Die Cast Aluminium In Single Piece Of 682Mm Height. The Artistically Curved Single Arm Made Of Ms Pipe 38.1Mm X 2Mm Thick, Spruced Up With Ms Scroll With Gravity Die Cast Aluminium Leaf And Ms Floral Embellishment, Is Firmly Held To The Stem By Way Of Cast Iron Clamps And The Arm Bears Cast Iron Knobs At One End And Other End Facilitates The Fitment Of Pendant Luminaire At 890Mm From The Vertical Axis Of The Bracket Stem. Pole Section Welded By Certified Welders Using High End Mig Welding Processes. Pdc Aluminium Service Door 348Mm Height X 110Mm Width Shall Be Provided With The Company Logo Embossed On The Bottom Of The Door And Safety Rope. The Control Gear Tray Is Prewired With 2.5 Sq.Mm Cable, 6A Sp Mcb And 32A Ramanuj Stud Type 4 Way Terminal Block For Loop-In / Loop-Out Arrangement, 5A 2 Way Terminal Connector And Provision For Earthing. Any Other Internal Cables And Connections Shall Not Be Covered In The Scope Of Supply. Mild Steel Mounting Plate 300Mm Square X 16Mm Thick Steel Of Grade E250 To Is 2062 : 2011 With 4 Elongated Holes 48 X 24 To Suit M20 X 500Mm Bolts Of Grade 4.6 At Cc 215. The Base Plate Have A Cable Entry Hole As Per The Base Pipe Size. This Mounting Steel Plate Along With Foundation Bolts Of Suitable Size To Be Used For Ensuring Firm Grouting Into The Specially Designed Foundation. All Dimension Are Within +/- 5% Tolerance. The Pole Is Coated With Zinc Rich Primer & Pure Polyester Powder Coating Or Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint (Coating Thickness 60-80 Microns). The Pole Shall Be Provided With Graphite Grey / Anthracite Grey / Black As Standard Colour Options. 246 Supply & Installation Of 3Phase ,15Kva Outdoor Type Ccms Panel Equipped With 1 No Street Light Controller, 1 No Energy Meter,1 No Tpn Mcb, 3 Nos 3 Pole Contactors, 3 Nos 1Pole Mcb’S, Battery, Smps, 3 Nos Current Transformers & Toggle Switches 247 Supplying And Fixing Of Sheet Steel Enclosure On Surface/Recessalong With 25Amps,Double Pole ,240V,10Ka, C Curve Mcb Complete With Connections Testing & Commissioning As Required 248 Supply Of 2C X 4Sqmm Copper Armoured Cable 249 Laying Of 2Cx4Sqmm Copper Armoured Cable 250 Aluminium Armoured Cable 251 4 X 16 Sq. Mm Aluminium Armoured Cable 252 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 253 Providing, Laying And 80 Mm Dia G.I. Pipe (Medium Class) In Ground Complete With G.I. Fittings Including Trenching (75 Cm Deep)And Re-Filling Etc As Required. Dsr No 254 Supply & ;Laying Of 63Mm Dia Dwc Hdpe Pipe Isis Marked Along With All Accessories Like Socket,Bend,Couplers Etc.Conorming To Is 14930 Part Ii Complete With Fitting And Cutting ,Joining,Etc.Direct In Gorund (75Cm Below Ground Leve;) Inclsuing Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc,Complete As Required. 255 Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Armoured Aluminum Conductor Power Cable Of 1.1 Kv Grade As Per Specification. . 256 4 X 10 Sq. Mm (25 Mm) 257 4 X 16 Sq. Mm (28 Mm) 258 Supplying And Making Straight Through Joint With Heat Shrinkable Joint Kit Including Aluminium Ferrules For Following Size Of Frls Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Per Specification. . 259 4 X 16 Sq. Mm 260 Mdb -1 ( Near Ccr Building ) 261 Sitc Of Wall/Free Standing Floor Mounted Dust And Vermin Proof Compartmentalised Cubical Panel For Electrical Works, Made Out Of Crca Sheet. Other Parameters Required As Per Point (A) Thickness Of Sheet Shall Not Be Less Than 1.6 Mm Up To 600 Mm Length/Width Of Any Compartment And Be Of 2.0 Mm Above 600 Mm. Load Bearing Structure Shall Be Of 2.0 Mm Thick Sheet Supported By Base M.S. Channel If Required. Side Walls And Cable Alley Compartment Shaving Bolted Type Doors With/Without Detachable Extension Type Structure (B) Panel Shall Be Duly Treated For Derusting In 7 Tank Process With De Phosphating And With Powder Coating Of Minimum 70 Microns On Both Side Of Panel In Desired Shade The Panel Having Pu/ Neoprene Rubber Gasket Of Not Less Than 3Mm Thickness, Required Hardware, Separate Detachable Gland Plate M.S. Base Channel (Min 75Mm), Hinged Door With Locking Arrangement For Equipment/Switchgear (C) Interconnection Between Bus Bar And Switch Gears/Cable Shall Be Rigidly Supported And Made Out By Flexible Copper Wires (Upto 125 Amp) And By Solid Bus Bar(>125 Amp). 262 Incomer 263 4P Mccb, 200A As Out Going 36Ka 264 Metering & Indication 265 1 Set Of Phase Indicating Lamps (Red/Yellow/Blue) 266 200/5A Ct 267 0-200 Amps Ammeter Analog 268 0-500 Amps Voltmter Analog 269 Selector Switch For Voltmeter 270 Selector Switch For Ammeter 271 Bus-Bar 272 1 Set Of 200A 4P Aluminium Bus Bar With Colour Coded Pvc Sleeves (4X800Mm)
Contract Date: May 30, 2026 Contract Value : 57.09 Crore
Government Departments No of Bidders 3
Uttarakhand View Result →
TenderDetail
Loading tenders