View Bid Results For Anchorage Connector Tenders

We found 26 Bid Results related to anchorage connector tenders. You can find Contractor details who won anchorage connector tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–1 of 26 tenders matching your filters

Defence #11200251 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Punjab View Result →

Power #10880664 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.62 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

Defence #10801071 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 9

Kerala View Result →

Public Administrative Department #10259911 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

Water Resources and Irrigation #10029814 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Maharashtra View Result →

Road Transport and Highways #9985787 AOC

Bids Are Invited For Pneumatic Air Hose Pipe 0 Point 75 Inch Inner Dia For Jack Hammer , Airline Lubricator For Jack Hammer , Coupling Male And Female 0 Point 75 Inch Dia For Jack Hammer , Clamp With Nut And Bolt 0 Point 75 Inch Dia , Connector For Air Hose 0 Point 75 Inch Dia , Washer For Coupling 0 Point 75 Inch Dia , Concrete Vibrator Powered By 4 Point 4 Hp Air Cooler Diesel Engine Fitted With Vibrator Needle 60 Mm Dia , Vibrator Needle 60 Mm Dia , W Beam Metal Barrier , Anchorage Cone 19T13 , Anchorage Wedges 19T13 , Master Wedge 19T13 , Profiler 19T13 Total Quantity : 3516

Contract Date: Ref. Documents Contract Value : ₹ 19.97 Lakh

Government Departments No of Bidders 3

Arunachal Pradesh View Result →

Defence #9985647 AOC

Bids Are Invited For High Modulus Polyethylene 12 Strand Rope , Rope Connector , Rope Connector Clamp , Anchorage Connector , Bolt For Anchorage Connector Total Quantity : 208

Contract Date: Ref. Documents Contract Value : ₹ 1.98 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Uttarakhand View Result →

Petroleum and Natural Gas #9544088 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 6

Delhi View Result →

Defence #9526510 AOC

Contract Date: Feb 11, 2026 Contract Value : ₹ 40.71 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Uttar Pradesh View Result →

10.

Defence #9351446 Technical Bid

Procurement Of Items , Single Rotary Glide Path File,21 Mm , Single Rotary Glide Path File,25 Mm , Dental Mouth Mirror Top Autoclavable Scratch Resistant Rhodium Coated Size 4 , Resorbable Alloplastic Graft Calcium Phosphosilicate With Polyethylene Glycol In Putty Consistency , Fibrereinforced Post And Core ( Kit) , Bite Registration Paste Polyvinyl Silicone , Glass Fiber Post (Pkt Of 10 Pcs ) , Barbed Broach Set Of 10-12 , Lining Cavity Composite Cal Hyd Based Photocure - Syringe Of 5 - 7 Gm With Applicator Tips , Points Absorbent Root Canal Assorted Box Of 6 Tubes Containing Assorted Sizes , Mineral Trioxide Aggregate ( Pkt Of 1 Gm) , K Files Stainless Steel Size No 8 Length 25 Mm Set Of 6 , K Files Stainless Steel Size No.10 Length 25 Mm Set Of 6 , Vaccum Blood Collection Tubes With Needles : Edta 3Ml , Crown Anchorage Posts, Titanium/Gold Plated Metal Assorted Size Screw Type With Keys And Matching Reamers Complete , Rapid Infusion Set , Apparatus Oxygen Inhalation Portable Tubing 1 Meter With Connector , Transparant Medicated Adhesive Wound Dressing 10 X 25Cm Box Of 12 , Transperent Medicated Wound 15 X 20Cm Box Of 10 , Vaccum Blood Collection Tubes With Needles : Sterile Tube With Gel - 5Ml(Material Plastic /Glass) , Elastomeric Impression Material Pkt Of Light Body , Bur, Round Tungsten Carbide For Fg 1.0 Mm, Pkt Of 3 , Bur Fissure Flat Cross-Cut Tungsten Carbide For Fg 1.2Mm , Brush Bristle Mounted Small Cup- Shaped For Right Angle Handpiece, Box Of 12 , Insulin Disposable Syringe 1Ml, 40Iu , U-Drain, Male Incontinence Device, Made Of Soft, Light Weight Latex Sheath, Size Large, 35 Mm. , U-Drain, Male Incontinence Device Made Of Soft, Light Weight Latex Sheath, Size Medium, 30 Mm. , U-Drain Male Incontinence Device, Made Of Soft, Light Weight Latex Sheath Size Small, 25 Mm. , Purified Chick Embryo Cell Vaccine , Polypropylene Blue Monofilament, 70-75 Cm, Size 4-0, 3/8 Circle Reverse Cutting, 12 Mm , Polybutylate Coated Braided Polyester, Size 2-0, 75 Cms White 1/2 Circle Taper Cut, 25Mm Double Needle , Polydioxanone Size 1-0, 70-75 Cm, 1/2 Circle Rb, 40-45 Mm => Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 10

Himachal Pradesh View Result →

11.

Defence #9013333 Technical Bid

Supply Of Spares For Bb / Ewbb / Bsb , Pin Panel , Pin For Post End Mk-2 , Bolts Riband , Bolts Bracing , Post Foot Walk , Tie Plates , Clamps Transoms ( Drg No Ebe-5024 / C ) , Bb Rakers , Ramps Plain , Bar Carrying , Post Picket 5 Mk Iii , Half Panel Gen Assy Details , Spanner Podger Ended 3 / 4 Bsw , Bag Transport , Spanner Podger Ended 1 1 / 4 Bsw , Spanners 1 1 / 4 Ratchet Bsw , Bb Panelassembly , Bb Frame Bracing , Templates Roller Plain , Timber Packing 9 X 3 X 6 ( 228 . 5 X 76 X 1828 ) , Template Rollers Rocking ( Drg No Ebe-5323 / 6 ) , Braces Sway , Foot Walk , Timbers Grillage ( 9 X 3 X 3 Ft 6 ( 228 . 5 X76 X 1045 ) , Pedastral Ramp Assy & Details , Ribands , Block Timber Distance Grillage , Post End ( Male ) Mk-2 , Base Crib , Details Of Steel Chesses Std Width With Lifting Hook ( Single ) , Chasses Wooden ( Ewbb ) , Stringers Plain , Ramp Button , Thimbles Wire Rope 2 , Safety Pin For Panel Pins , Bolts Chord , Bolt Distance Girllage 2 - 1 , Hinged Clip , Clips Screwed , Timber Packing 9 X 1 X 6 ( 228 . 5X25 . 4 X1828 ) , Grips Bulldog 5 / 16 ( For 2 Rope ) , Bolts Sleeved , Bearing Junction Link , Frames Bracing Half Panel Bracing Frame Assy , Bb Wedges , Chesses ( Wooden ) , Timber Grillage ( 9 X 3 X 8 Ft . 6 ( 228 . 5 X 76 X 2568 ) , Cases Transport , Capsill Crib Ewbb , Frame Bracing Heavy Ewbb , Levers Panel , Extractor Panel Pin , Spanner Se Open Jaw Special , Spanner Box Special , Thimble Solid Heart 25 / 8 ( 66 . 68Mm ) , Trewhella Grabe ( Imported ) , Bearers Foot Walks , Pin Sway Braces , Connector Anchorage Adjuster , Drift Pin , Special Nut With Washer For Bsb ( Frame Bracing Light ) , Hold Fast , Portal Racker Attachment Bottom , Portal Racker Attachment Centre , Stringer Clamp , Details Of Steel Chesses Std Width With Lifting Hook ( Double )

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 5

West Bengal View Result →

12.

Public Administrative Department #8994223 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Madhya Pradesh View Result →

13.

Tourism #8648630 AOC

Contract Date: Jan 23, 2026 Contract Value : ₹ 6.76 Crore

Government Departments No of Bidders 11

Odisha View Result →

14.

Rural Development #8555958 AOC

Contract Date: Jan 06, 2026 Contract Value : ₹ 1.19 Crore

Government Departments No of Bidders 2

Maharashtra View Result →

15.

Rural Development #8555957 AOC

Contract Date: Jan 06, 2026 Contract Value : ₹ 92.31 Lakh

Government Departments No of Bidders 2

Maharashtra View Result →

16.

Rural Development #8520334 AOC

Tender For Piped Water Supply Scheme Talere Pawarwadi Tal. Kankavli - RCC WELL Item No. 1Excavation in general in soft material comprising of soft soil, soft murum, sand,hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5M and lead of 150 M including barricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-incharge, etc. complete excluding refilling.Lift 0.00 M to 1.50 m 2 Lift 1.50 M to 3.00 m 3 Lift 3.00 M to 4.50 m 4 Item No. 2 Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc. by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including barricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-incharge, excluding refilling.Lift 0.00 M to 1.50 m 5 Lift 1.50 M to 3.00 m 6 Lift 3.00 M to 4.50 m 7 Lift 4.50 M to 6.00 m 8 Lift 6.00 M to 7.50 m 9 Lift 7.50 M to 9.00 m 10 Lift 9.00 M to 10.50 m 11 Item No. 3 Providing and laying in situ Cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. completeP.C.C 1:2:4 ( M-15 ) 12 Item No. 4Providing & costing inconstructingin situ. C.C of trap granite/ quartzite / gneiss/ metal of approved quality of R.C.C. work as per detailed drawing & design or as directed by Engg. in charge including dewatering , ceterind from work,compacting, finishingthe formed surface withC.M. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( By weight batching & mix design for M-250 & M-300 only use of L&T, ACC Ambuja, Birla Gold, Manikgad, Rajashree etc. cement is permitted excluding M.S or Tor reinforcement in R.C.C. M-250grade.A)lift 0.00 to 5.00m 13 B)lift 5.00 to 10.00m 14 A)lift 0.00 to 5.00mRCC M 250 Verical Wall / Slab /landings 15 B)lift 5.00 to 10.00m R.C.C. M-250 for vertical wall 16 Item No. 5Providing & fixing in position steel bar reinforcement of various diameters for R.C.C. Pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels,chajjas, lintels,pardies,coping,fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars,bindingwith wires or tack welding & supporting as required etc. complete (including cost of binding wire). Tor steel 17 Item No. 6Providing & laying weep holes of 80 mmAC/PVC pipe as per drawing for abutment returns, return wallsetc. complete. 18 Item No. 7Dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by Engineer-in-Charge (including cost of machinerylabour fuel )etc complete. 19 Item No. 8Providing and filling around the well boulder filling of selected variety and size of boulders including cost of all materials, labour, transportation etc. complete with all leads and lifts.i)From barrow MJP DSR 23-24 P/I-291/4 (Rs 974+10%) 20 ii) From available stuffMJP DSR 21-22, P/I 13/52 (Rs 469+10% ) 21 Item No. 9 Reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. 22 Item No. 10Providing and fixing in position C.I. dapuri steps or 22 mm dia. M.S. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by Engineer- in-charge. 23 Item No. 11 :- Providing structural steel work in single stanchions composed of RSJ, channel with caps, bases,lild steel plates, angles etc. as per detailed design & drawings or as derected by Engineer in charge including cutting, facricting hoisting, erecting fixing in position and one coats of anticorroisive paint and over it two coats of oil painting etc. complete. MJP DSR 23-24P/I - 45/4 (Rs 84020+10%) 24 Item No. 12 Providingand fixing M.S. chequerred plate flooring of following thickness Supported on M.s.angle 25x25 x 6mm Size -including welding & cutting and frbricating the plate to the required Square or rounding -shape,making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. comp. 8mm thick MJP DSR2023-24 P/I 291/6a (5156+10%) 25 Item No. 13 Providing and fixing in position M.S.ladder 0.50 M wide consisting of 75 x10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including costof material and labour involved,welding, anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.MJP DSR 2023-24P/ I:-281/5 26 Item No. 14 Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour,transporting bends to curved shape, etc.complete.[MJP DSR 2023-24P/ I:-56/1 ] (898+10%) 27 Item No. 15 Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete 28 Subestimate -Pump Shed Item no1:- Excavation for foundation in following strata inclu..removing the excavated material upto a distanceof 50m beyond the area & lifts 1.5 m stacking spreding back filling etc. comp.In hard murum & bolders 29 Item no 2:- Providing & laying in situ P.C.C. of following type of trap metal for foundation & beding including dewatering formwork compation,curing etc.compdewatering formwork compation,curing etc.comp [a] PCC1:2:4 30 [b] PCC1:2:4 31 Item no3 :- Providing lat. Stone masonry in C.M.1:6 In foundation & plinth / Superstructure inclu.. striking joints on the unexposed faces watering, scafolding etc.comp.(A)foundation & plinth 32 (B) Superstructure 33 Item no4:-Providing dry trap rubble stone soling in 15cm to20cm thick Layers inclu. .hand packing compacting etc.. Comp 34 Item no.5:- Providing & fixing Precast RCC door with 75mm*100 mm frame with or without ventilator as per detailed drawing inclu..the door frame, iron fixtures & fastenings with oil painting 3coats etc..comp. 35 Item no.6:-Providing & fixing precast RCC window of size 0.50*0.40 m inclu…fixing properly etc…comp. 36 Item no.7:-Providing cement plaster 12mm thick with appropriate coat in cement morter 1:3 proportion inneeru finish to concrete, brick or stone surfaces in all positions inclu..scaffolding curing etc ... Comp 37 Item no.8:-Providing &applying two coats of waterproof cement paint of approved manufacture and of approvedcolour to the plasterd surface including scaffolding if necessary & preparing the surface, watering for two days curing etc..comp.For two coats with primer 38 Item no.9:-Providing & fixing paneled door as per detailed drawing inclu..the door frame,iron fictures & etc..comp. 39 Item no.9:-Providing & fixing paneled door as per detailed drawing inclu..the door frame,iron fictures & etc..comp. 40 Item no.11:-Providing & fixing AC corrgated Roofing sheet inclu.. cutting, bedding, hooking with J boltsetc..comp. 41 Subestimate-pumping Machinary Item No. 1Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturers design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.2.00 BHP PUMPSET 42 Item No. 2 Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.3 core 2.5sqmm 43 Item No. 3Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. 44 Item No.4Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for < 7.5 HP pump etc.complete. (Market rate) 45 Item No.5Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main 46 Item No. 6 Providing tools for pumping. 47 Item No. 7Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) 48 Item No. 8Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP 49 Item No. 9 Providing ISI mark G.I. pipe ..etc. completeGI Pipe 65 mm Dia M Class 6.63 kg/m 50 Item No. 10 Lowering of ISI mark G.I. pipe ..etc. completeGI Pipe 65 mm Dia M Class 6.63 kg/m 51 Item No. 11Supplying and erecting B class GI pipe bend in position with neccessory material 52 Item No. 12 Providing and supplying ISI standard MS specials ... etc. complete.MJP 53 Subestimate - Rising Main Item No. 1Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloadingand stacking etc. completeas per IS-458/1988.RCC PIPE 150 MM NP 2 54 Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc.75mm Dia HDPE PN 8 PIPE. complete. 55 Item No.3 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete Sluice valves 65 mm Dia. 56 Item No.4 Providing & supplying ISI mark CI D/F reflux valve (Non- returnvalve)offollowingdiaincludingalltaxes(central andlocal), railwayfreight, inspectionchargesunloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. completeReflux valves 65 mm Dia reflux valves as per I.S.5312 part I (1984) 57 Item No.5Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991.Sluice valves 65 mm Dia. for Washout 58 Item No.6 ProvidingandsupplyingAirvalvesasperIS-10845and MJP’s standard specifications of approved mark and quality offollowingdiametersincludingalltaxes (Central andlocal),railwayfright,inspectionchargesunloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 25 mm Dia 59 Item No.7Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259)(HARD MURRUM MASS) 60 Item No.8 Excavationforfoundation/pipetrenchesinhardmurum and boulders, W.B.M. road including removing the excavatedmaterialuptoadistanceof50Mbeyondthe area and lifts as below, stacking and spreading as directedbyEngineer-in-charge,normaldewatering, preparingthebedforfoundationandexcludingback- filling, etc. complete.(HARD MURRUM ANDBOULDERS) 61 Item No.9 Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(SOFT ROCK) 62 Item No.10Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. 63 Item No.11 Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985.RCC PIPE 150 MM NP 2 64 Item No.12Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II75mm Dia HDPE PN 8 PIPE. 65 Item No.13 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 65 mm Dia. 66 Item No.14 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Reflux valves 65 mm Dia 67 Item No.15 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 65 mm Dia. for Washout 68 Item No.16 Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 25 mm Dia- Single Bash 69 Item No.17 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leadsand lifts including consolidation, surcharging, etc. complete 70 Item No.18 Restoration of road crossing during pipe layingRCC PIPE 150 MM NP 2 71 Item No.19 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.75mm Dia HDPE PN 8 PIPE. 72 Item No.20Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.Sluice valves 65 mm Dia. 73 Reflux valves 65 mm Dia 74 Sluice valves 65 mm Dia. for Washout 75 Subestimate - Rcc Platform & TankItem No.1:- Excavation for foundation/ Pipe trench in S.M., H.M., H.M.B. soft rock and old cement, soft rock, hard rock by controlled blasting hard rock by chiseling & late rite rock massesmechanically includingremoving the excavate material up to a distance of 50m. & lifts as bellow stacking &spreading as directed, normal dewatering preparing the bed for foundation &excluding back filling etc. complete A) Soft Strata MJP SSR2023-24 P No 37 ; INo 1 Rs.165 +10% 76 B) HardStrataMJP SSR2023-24 P No 37 ; INo 3 Rs.211 +10% 77 Item No.2 :- Providing & laying in situfollowing gradec.c.oftrap/ granite /quartzite/ gneiss matel forfoundation & bedding including dewatering form work compaction finishing & curring etc.complete.M 150MJP DSR 23-24 P/I47/1b Rs.5881/-+10% 78 Item No.3 :- Providing & laying in situfollowing gradec.c.oftrap/ granite /quartzite/ gneiss matel forfoundation & bedding including dewatering form work compaction finishing & curring etc.complete M200 FootingMJP DSR 23-24 P/I 44/2(b)7318/-+10% 79 b)ColoumnMJP DSR 23-24 P/I 47/3(b)8815/-+10% 80 c) Beam MJP DSR 23-24 P/I 48/4(b)8674/-+10% 81 d) Slab MJP DSR 23-24 P/I 48/5(b)9313/-+10% 82 Item No.4 :- Providing & fixing in possition steelbar reinforcement of various diamaters for R.C.C. piles,caps, footing, foudationa, slabs, beams, columns, canopies staircases, pardies etc. as per detailed designs, drawings and schedules, including cutting bending, hooking the bars, binding with wires, and supporting as required etc.complete ( including cost of binding wire) Tor steelMJP DSR 23-24 P/I 50/8(b) 80681/-+10% 83 Item No. 5 :- Providing & fixing in possition MS ladder 0.5 Mtr. Vide consiting of 75 x 10M MS flates stringers &M S flat double rows as step placed at 25cm incl.cost of material & labour etc.completeMJP DSR 23-24 P/I281/51493/-+10% 84 Item No.6:- Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, distance and additional posts at every corner bends to curved shape with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete. 85 Item No.7:-Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above PWD SSR 22-23 S.R No 1425/ SSR No.42.54 11.00+10% 86 Item No. 08 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below MJP DSR 2023-24 P/I 93/1-b-vii Rs.524/- 87 Subestimate - Distribution SystemItem No. 1Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloadingand stacking etc. completeas per IS-458/1988.RCC PIPE 150 MM NP 2 88 Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc.63mm Dia HDPE PN 6 PIPE. complete. 89 Item No.3 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete Sluice valves 50 mm Dia. 90 Item No.4 ProvidingandsupplyingAirvalvesasperIS-10845and MJP’s standard specifications of approved mark and quality offollowingdiametersincludingalltaxes (Central andlocal),railwayfright,inspectionchargesunloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 25 mm Dia 91 Item No.5 Excavationforfoundation/pipetrenchesinhardmurum and boulders, W.B.M. road including removing the excavatedmaterialuptoadistanceof50Mbeyondthe area and lifts as below, stacking and spreading as directedbyEngineer-in-charge,normaldewatering, preparingthebedforfoundationandexcludingback- filling, etc. complete.(HARD MURRUM ANDBOULDERS) 92 Item No.6Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259)(HARD MURRUM MASS) 93 Item No.7 Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(SOFT ROCK) 94 Item No.8 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and leveling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Hard Rock 95 Item No.9 Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. 96 Item No.10 Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985.RCC PIPE 150 MM NP 2 97 Item No.11Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II63mm Dia HDPE PN 6 PIPE. 98 Item No.12 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 50 mm Dia. 99 Item No.13 Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 25 mm Dia- Single Bash 100 Item No.14Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete.100 mm x 225 mm (20 kg) 101 Item No.15 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leadsand lifts including consolidation, surcharging, etc. complete 102 Item No.16 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.63mm Dia HDPE PN 6 PIPE. 103 Item No.17PRV used to maintain pressure in the distribution system 104 Lowering,laying and fixing charges 105 Subestimate- Personal Tap ConnectionItem No. 1Item No.1:- Providing personal tap conectionwith including excavation for conection, 15 mm dia pipe ,including cost of alllabour, including all fitingmaterial etc. complete.A) MDPE/UPVC Pipe Without Road Crossing (Rate As PerCircular date 03/08/2020) 106 B) MDPE/UPVC Pipe With Road Crossing (Rate As PerCircular date 03/08/2020) 107 Subestimate-Trial Run Item No. 1 Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.

Contract Date: Dec 23, 2025 Contract Value : ₹ 25.20 Lakh

Government Departments No of Bidders 3

Maharashtra View Result →

17.

Defence #8362550 AOC

Contract Date: Dec 02, 2025 Contract Value : ₹ 28.46 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Uttar Pradesh View Result →

18.

Defence #8258803 AOC

Contract Date: Nov 10, 2025 Contract Value : ₹ 29.86 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Jammu And Kashmir View Result →

19.

Defence #8220947 AOC

Bids Are Invited For Sprocket Chain Mechanism , Track Stores For Fd Load Carriage System , High Tension Bolt For Fd Load Carriage System , Connector Plank And Bolt For Fd Load Carriage System , Anchorage System And Base Plate For Fd Load Carriage System , Construction Material For Fd Load Carriage System , Prime Movers And Trolley As Per Tech Sanction Total Quantity : 7

Contract Date: Ref. Documents Contract Value : ₹ 39.80 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 11

Uttarakhand View Result →

20.

Defence #8164660 AOC

Contract Date: Oct 28, 2025 Contract Value : ₹ 11.75 Crore

Statutory Bodies & Commissions/Committees No of Bidders 11

West Bengal View Result →

21.

Defence #7911852 AOC

Bids Are Invited For High Modulus Polyethylene 12 Strand Rope , Rope Connector , Rope Connector Clamp , Anchorage Connector , Bolt For Anchorage Connector Total Quantity : 208

Contract Date: Ref. Documents Contract Value : ₹ 1.98 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Uttarakhand View Result →

22.

Road Transport and Highways #7910057 AOC

Contract Date: Ref. Documents Contract Value : ₹ 19.97 Lakh

Government Departments No of Bidders 3

Arunachal Pradesh View Result →

23.

Drinking Water Supply and Sanitation #7768823 AOC

Tender For Safety Equipment for Fatehabad Town Disrtrict Fatehabad and allother works contingent thereto Fatehabad Town Supply of Safety equipments for Sewer man’s working under Sub Division No.3, Fatehabad and all other works contingent thereto.-- 1 N.S. Item 2 Supply of Head Light (LED 2 watt) rechargeable type 3 Supply of Chin Cartridge Gas Mask (PAS make) as per IS:8523.1977, neoprene eubber, screwon type chin cartridge, supplied in Canvas bag and User`s instruction 4 Supply of Air line breathing Apparatus(PAS Make) as per IS:10245 (part-III) having One cylinder of capacity above 3000 liters, duration approx 90 mints, preset double stage pressure reducing assembly, audio warning whistle,15 mints, breathing tubing, postive pressure demand valve,Full Vision Face Mask-supplied in storage cum carrying box. 5 Supply of Hand Blower (PAS Make) prtable Horizontally driven Blower having dimention 20`x23`x20`, 9 mtrs. Long 50mm dia wire braided PVC Hose pipe . 6 Supply of Life Line Rope 7 Supply of Resuscitator (PAS Make) for resuscition to victim of Toxic gases inhalation,shock etc. 8 Supply of First Aid Box-Having 26 essential items. 9 Supply of Portable Ladder-Made of 12mm rope with 25mm dia flutted Alluminium rangs with safety cap,2 anchorage points with hooks, length 5 Mtrs. 10 Supply of Flame Proof Torch UL approved 11 Supply of Litmus Paper-Lead Acetate Paper For H25 detection (1 packe) 12 Supply of Fume Exhauster Cum Air Blower(PAS Make) Model FLP650. 13 Calibration of Multi Gas Detector-Sensor for 4 Gases CH4, H25, O2andCO, portable, integrated Sampling pump, rechargeable battery for more then 12 hours use, STEL, TWA (overtime), datalogging, Certifications-CSA class 1 Div,1,ABCD,T4 ATEX etc. 14 Supply of Royal Care Artificial Resuscitator, Autoclavable Silicon Ambu Bag Manual Resuscitator 15 Supply of Barrier caution tape 16 Supply of Barrier cream 150gm 17 Supply of Cones Safety Cones For Road Safety 3 PVC Traffic Safety Cones with 2 mm 3 Meters Plastic Safety Chain and 3 Black Rubber Hooks For Connecting Traffic Safety Cones Multipurpose PVC Safety Cones With Reflective Tape With Black Rubber Base 18 Supply of Venus Yellow Chlorine Gas Mask With Canister 19 Supply of Coreel 4 Gas Monitor, Portable CO, H2S, O2,EX Gas Detector Meter - Ready to Use (Orange) 20 Supply of life guard pad 21 Supply of Modular Breathing Airline Trolley System-90mint / 120mint (portable) 22 Supply of Port oxy 23 Supply of Safety body clothing 24 Supply of Safety helmets 25 Supply of Emergency Safety Shower and Eye Wash 26 Supply of Full Body Harness Safety Harness 27 Supply of Sewer Pipe Inspection Camera Kit with Light shade ,Accessory case , Compact keyboard, Data indication RS 232, Electronic metre counter, Integrated power supply unit ,12 V auto adapter Drain program PIPEX plus TINY tests adapter,Balljoint,Servicebook with operation manual,USB connector and150 Mtr. cable in vertical and horizontal checking for sutable size of manhole in 15 mtr. vertical depth and 130 Mtr. Horizontal Depth.

Contract Date: Aug 13, 2025 Contract Value : ₹ 5.18 Lakh

Government Departments No of Bidders 1

Haryana View Result →

24.

Power #6483301 AOC

Bids Are Invited For Industrial Safety Helmet , Rubber Gum Boots , Full Body Double Lanyard Harness , Detachable Type Rope Grab Fall Arrestors With Connectors , Retractable Wire Rope Fall Arrestor Block , Horizontal Anchorage Line Fall Arrestor , Electrical Resistance Hand Gloves , Acid And Alkali Proofhand Gloves , Acid And Alkali Proof Apron , Leather Handgloves , Cotton Hand Gloves , Welders Face Shield ,Reflective Jacket Total Quantity : 1975

Contract Date: Ref. Documents Contract Value : ₹ 38.18 Lakh

Government Departments No of Bidders 10

Bihar View Result →

25.

Defence #5472619 AOC

Contract Date: Ref. Documents Contract Value : ₹ 73.25 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 14

Assam View Result →

26.

Educational and Research Institute #4834123 AOC

Bids Are Invited For Small Crimping Tools ( Assorted ) 10-100Mm ( 5 Nos ) - Jaw Set- Carbon Steel Grade Scm440, Frame- Material Steel Grade S45c, Handle-Pp For Better Grip , Plumb Bob 115 Grams - Material Cast Iron, Weight 115 Grams + 5%, Should Be Supplies With Good Quality Rope , Terminal Screw Driver 75Mm Connector - Dimensions Size: 3 Mm X 75 Mm ( A - 75 Mm, D - 3 Mm ) , Tip Bit Size: B X T : 3.0 Mm X 0.5 Mm, Blade Made Of High Grade Silicon - Manganese Steel ( En 45 A ) , Hardness On Tip: 55 - 58 Hrc Handle Handle Should Be Made Of High Grade Ca Plastic, Which Is Non - Flammable , , Bradawl 150Mmx6mm Square Pointed - Size 150Mmx6mm , Silverline Point Square Bradawl With Wooden Handle , Wooden Mallet 1 Kg ( 75Mmx15mm ) - Total Length: 325Mm ±3Mm, Max.Width.: 130 ±1Mm, Width: 115 ±1 Mm, Thickness: 75 Mm±1Mm, Wood Material: Hardwood, Finishing: Fine Finishing With Body Or Chamfered , Working Bench 2.5M X 1.20 Mx0.72 Meters - The Overall Size Of The Work Bench Shall Be 2500Mm ( W ) X 1200Mm ( D ) X 750Mm ( H ) , The Main Legs Used In The Entire System Are Fabricated By Co2 Welded Ms , Metal Rack 180Cmx150cmx45cm - Number Of Layers Five , Material Of Angle Mild Steel Slotted Angle ( Powder Coated ) 40 X40 Mm X 1.9 Mm Thick, Material Of Shelve Pre Coated Crc Sheet 1 Mm Thick, Load Capacity Per Layer 50-100 Kg, Unit Size 150Cm ( H ) X100cm ( W ) X45 Cm ( D ) 148.8 Fitting By M8 Ms Nut Bolts & ‘L’ Shaped Braces With Adjustable Height. , Wiring Board 3 Meter X 1 Meter With 0.5 Meter Meter Projection On The Top - Length- 3 Mtr , Width- 1 Mtr , Ceiling Length & Width – 3Mtr X 0.5 Mtr, Thickness- 35Mm, Height Of Stand 0.75 Mtr , Material – Pine Wood Of Thickness- 35Mm, Frame Structure – 2Mtr X 3Mtr Ms Square Pipe 50 Mmx1.6Mm Thick Fabricated. , Safety Belt With Provision For Keeping Tools - Material: Polyester Strap , Standard: En813 En361 En358 , Size: Universal, Pattern : Webbe , Two-Colored Harness , Back Anchorage Point , 1 Front Anchorage Point. , 1 Ventral Anchorage Point For Rope Access , Tool-Holding Rings , Work-Positioning Belt , With Lateral D-Rings , Adjustable Shoulder And Leg Straps , An Extension Band, Padded Leg Straps , Cleaning Tray 45X30 Cm - 1. 45 Cm X30 Cm X 8 Mm Heavy Duty Washer, 2. 22-Gauge Gi Sheet, 3. Machine Drain Pan, 4. Galvanized Steel, 5. Drip Tray Catch, 6. Leak Proof , Flux Meter - 1. Measuring Range: 20Mwb, 2.Basic Error:±1%, 3. Sensitivity: 1Μwb, 4. Instability:1 Bit / 10S, 5.Input Impedance:20Ko, 6.Surrounding Temp:5?~40?, 7. Related Humidity:20%~80% ( No Lon ) , 8.Power Supply:Ac220v50hz, 9.Display: Led, Positive And Negative Display Automatically , Thermostat - 1. Working Condition , 2. Generally, About 200 Degrees F, 95 Degrees C , 3. Parts Catalogue Suitable Sketch On Vinyl Board , 4. Suitable For Heavy Vehicle , 5. Material Brass And Ms , Ceiling Fan Coil Winding Machine 250 V , 50 Hz, 1-Q With Speed Control - 1 ) Capacity 35 To 40 Stator Per Day 2 ) Counter Type 3 Digit Frd 3 ) Stator Diameter 105Mm To 165Mm 4 ) Frequency 50 Hz 5 ) Wire Gage 30 To 406 ) Winding Direction Clockwise7 ) Phase Single With Speed Control 8 ) Motor 1 / 4 H.P. Single Phase 220V.Ac 9 ) Power Supply 220V.Ac 10 ) Machine Type Automatic 11 ) Dimensions 810Mm X 280Mm X 1500Mm 12 ) Standard Accessories A ) All Standard Dies And Stand B ) Wire Guidesd ) Spool Container With Tensioner Mounting Stand Instructions : A ) Operating Manual With Circuit A ) Diagram Must Be Provided. B ) ) Practicals List To Be Performed Shoule Be Provided.With Circuit Diagram C ) Control Board Should Be Fitted With Nut & Bolt Properly At The Institute To Perform Practicals At Manheight Level For Trainee’S Safty , Solar Street Light Lamp Set 12 V, 18 / 24 Watts - 1. Solar Panel ( Solar Photo Voltaic Module ) : The Mnre Approved Indigenously Manufactured , Pv Module Should Be Used And Should Have Poly Crystalline Silicon Solar Cells. , The Power Output Of The Modules Under Stc Should Be A Minimum Of 150Wp. , The Open Circuit Voltage Of The Pv Module Under Stc Should Be At Least 21.0 Volts., The Module Efficiency Should Be Minimum 14%. The Terminal Box On The Module Should Have A Provision For Opening It For Replacing The Cable , The Module Shall Be Designed To Withstand Tough Environment Conditions Conforming To Iec 61215 Edition Ii / Bis 14286. , Manual Motor Coil Winding Machine With Step Arbor - 1 ) With Straight And Step Coil Arbors 2 ) Should Wind Both Single And Three Phase Motor Coils. . 3 ) For Winding Motors From 1 / 2 Hp To 40 Hp. 4 ) No Of Arbors - Five Step Arbors-01 No Straight Arbors-01 No 5 ) Material Of Arbors Aluminum 6 ) With Manual Counter 7 ) Count Range: 0-9999 Rings 8 ) Size & Materialsize - Base 13 X 15 Package Dimensions: 13 X 8 X 10 8 ) Material - Mild Steel 9 ) Features: 10 ) Easy Operations 11 ) Easy Functioning 12 ) Superior Performance , Set Of Wall Jumper Octagonal 37Mmx450mm And 37 X 600 Mm - 1. Shape :Octagonal , Size : 37Mm X 450Mm & 37Mm X 600Mm , Material : En8 , Scraper Triangular 250 Mm - 1. Triangular 11-12-2021 I. Total Length: 330 Mm ± 2Mm, Ii. Blade Length: 250 Mm ± 1Mm , Iii. Blade Width: 16 Mm ± 1Mm , Iii. Blade Width: 16 Mm ± 1Mm , 2. Blade Material: High Carbon Steel , 3. Blade Hardness: 55 - 60Hrc, 3. Blade Hardness: 55 - 60Hrc , 4. Handle With Proper Grip Wooden / Plastic , Tower Ladder On Type Wheels Min 10Ft-Max 30Ft - Specification : Size10 To 30 Feet , Structurealuminium , Foldablenon Foldable , Coloraluminium , Rope 8 Mm Size Confirming Is : 733-1983, 1285-1975 , Featuresaluminium , Capacity150 Kg , Materialaluminum, Mild Steel, Rubber Wheel , Ladder Typetower Ladder , Main Frame: This Ladder Should Made Up Of Aluminium Alloy “C” Section 66*32*3.18 Mm Thickness. He30 / 6351 / T6 Grademechanical Properties – Uts ( Mpa ) -353.14 , % Elongation On , Steps: The Steps Should Made Up Of Non Slipaluminium Alloy Corrugated Fluted Pipe Step Of 1” Dia And 3 Mm Thickness He30 / 6063 / T6 Grademechanical Properties – Uts ( Mpa ) -182.22, % Elongation On 50Mm Gl- 14, 0.2% Proof Stress Mpa – 173.53 ( Certificate Confirms To Is 733 ) , Step Interval: Every Step Should Has An Interval Of 12” For Easy Climbing And The Ladder Has A Single Sliding Movement. Both Sides Of The Flutted Pipe Steps Should Covered With Plastics Caps To Avoid Insects Going In., Platform Size: Platform Size:17.5×19 Inch Which Should Made Up Of Aluminum Alloy Frame With Aluminum “L” Angle And Chequered Sheet Of 3 Mm Thick , , Ms Trolley: The Ladder Base Should Made Of Ms Channels ( 100*50*6Mm ) And The “L” Angle ( 50*50*6Mm ) . The Ms Trolley Size Should 5 Feet X 6 Feet On Ground. , Stud Remover With Socket Handle - 1. Capacity: 20Mm , , 2. Material: Chrome Vanadium Steel , , 3. Eccentric Roller Grips Stud More Firmly, , 4. Should Be Compatible To Half Inch Square Drive Wrench , , 5. Should Be Supplied In Wooden / Plastic Box With Proper Cushioning , Anvil With Stand 50Kg - 1. Total Length: 515 ±2Mm , , , 2. Total Width: 155 ± 1Mm , , 3. Base Length: 265 ± 1Mm , , , 4. Height: 240 ± 1Mm, , , 5. Total Weight: 50Kg , Foot Print Grip 250Mm - Specification : 55.2 Jaws Made From Drop Forged Alloy Steel , Hardened And Tempered, Quick Release , , Lever For Adjustable Opening , , Vice Grip Plier, , Length : 250 Mm , Blow Lamp 1 Liter - Specification: Material Used: Brass & Iron Steel , , Additional Name: Brass Pressure Kerosene Blow Lamp , , Capacity Of Tank : 1 Lit. , , Provided With Handle For Smoth Grip , V Block 75X38mmpair With Clamps - 1. Total Length: 75 Mm ±1Mm , , 2. Total Width.: 38 Mm ± 0.2Mm , , 3. Total Height: 38 Mm ± 0.2Mm , , 4. Angle: 90 Degree , D.C. Series Motor With 2 Point Starter 3 Hp 250 V With 3 Point Starter And Speed Regulator ( Laboratory Type ) - 1 ) Basic Item Specificationan Integrated Panel Workbench Consisting Of Instrument Panel And Working Table Should Suitable For Students To Learn And Perform Various Experiments Of Electrical Related Subjects. Instruments Should Internally Electrically Connected Andshould Be Fitted In The Panel Such That Only Front Panel And Necessary Interfaces Areeasily Accessible To Use. Structure Of Workbench Should Be Made Up Of 1.5 Mm Thickcrc Powder Coated Pipes With Top Made Up Of Good Quality 19 Mm Thick Plywood Andcovered With 1.8 Mm Off White Colour Mica. 9 ) Control Board:Technical Specifications Of Dc Machine ( Motor ) 24 ) Type: Series25 ) Power Rating: 3 H.P.26 ) Voltage Rating: 220V ± 10%27 ) Rated Speed: 1500Rpm ± 7.5%28 ) Insulation: Class B’29 ) Confirming To I.S.: 4722-199230 ) S.P.D.P. Type, Horizontal Foot Mounted31 ) Loading Arrangement: Mechanical, Fitted On Machine Base “C” Channel, Durable Good Qualityspring Balance: 2 Nos. ( Tubular Type ) With Belt, Brake Drum / Pulley: Aluminum Cast With Heatsuppression Facility32 ) Machine Base: Fabricated Ms “C” Channel ( 75 X 40 X 6 Mm ) , Rubber Matting 2Meterx1meterx9mm - Specification : 1 ) Size2mtr X 1Mtr X 9Mm ( Thickness ) , , 2 ) Material- Synthetic Elestomer , , 3 ) Insulation Resistance : 100000 M Ohms Min. , , 4 ) Leakage Current : 10 Ma. Max., , 5 ) Class A, Working Voltage 3.3 Kv, , 6 ) Di-Electric Strength 30 Kv, , 7 ) Confirming To Is-15652:2006 , White Board Size 1200Mm X 900Mm - 1 ) Size Of White Board: 4 X 6 Feet. , , 2 ) Confirming To Is Code – 3087, 733 , , 3 ) White Board With Ceramic Coated Steel Sheet Top Surface: , , , Philips Screw Driver Set Of 5 Pieces - 3. Sizes: 1 A:100Mm D:6Mm Tip Size:00 , , .2 A:150Mm D:6Mm Tip Size:0, , 3 A:200Mm D:8Mm Tip Size:1, , , 4 A: 250Mm D:8Mm Tip Size:2, , 5 A: 300Mm D:10Mm Tip Size:3, , 4. Blade Made Of High-Grade Silicon – Manganese Steel, , , Forge With Hand Blowers - Specification :1 ) Blower Type Hand Blowerallu. Cast Material With Cast Iron Furnace 2 ) Operate Mechanism Worm & Gear With Handle 60.4 Size / Dimension 16 X 8 X 8.5 Approx. 3 ) Usage / Application Hand Blower Can Be Used For Industrial Purposes Byblacksmiths 4 ) Weight 6Kg Approx. , Trowel 150 Mm - Specification : 1 ) Length: 150 Mm, , 2 ) Weight: 250Grams+10% ( Approx. ) , , 3 ) Blade: Highcarbonspringsteel, , 4 ) Thehandleshouldbelacquerpolished, , 5 ) Handleshouldbemadefromselectedhardwood, , 6 ) Thehandleriseshouldbe Setforcorrect Hang&Balance., , 7 ) Theblade Shouldbehardened&Temperedtoensuredurability. , , 8 ) Blade Shouldbepolishedfromthe Bottom& Powdercoatedfromtop, , , 9 ) Woodenhandle Shouldbeattached Forcomfortablegrip , Magneto Spanner Set With 8Spanners - 1. Sizes: 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, , 2, Slightly Rounded Handles – Sand Blasted, , 3.I - Section Design Of Handle And Heads To Combine Strength And Low Weight, , 4.Thoroughly Corrosion Protected With Nickel Chrome Finish, , 5.Head At Each End Are Of Different Sizes And Set At An Angle Of 15Degrees , All Types C.F.L.Lamps Sets 5 Watts, 15 Watts, 25 Watts - Specification : 1 ) Watt 5, 15, 252 ) Range Voltage ( V ) 120V-300V 3 ) Lumen ( Lm ) 43004 ) Power Factor 0.555 ) Average Life ( Hours ) 6000 Hrs , Single Phasing Preventer 415V - 1 ) Voltage 415V Ac 110.3 Frequency 50 Hz 2 ) Phase Three 3 ) Protection Low Voltage, Zero Voltage, Unbalance Voltage, Negative Phase Sequence, Single Phasing 4 ) Reset Automatic , Also Manual Reset Should Provided 5 ) Indication By Led Should Provided , Metal Clad Circuit Breaker ( Mccb ) 220V X 1A - Specification :1 ) No.Of Poles 2 Pole, , 2 ) Rated Current 1 Amp, , 3 ) Voltage 220 V, , 4 ) Rated Shortcircuit Breaking Capacity 10Ka, 15Ka, , 5 ) Phase Single Phase, , 6 ) Frequency 50 Hz, , 7 ) Mounting Type Din Rail, , 8 ) Curve Type B / C / D 9 ) Standards En / Iec 60947-1 & 2 , Lead Acid Battery 75Ah 12 V - 1 ) Capacity 75 Ah, , 2 ) Voltage 12 V Dc , , 3 ) Type Lead Acid Type, , 4 ) Encloser Tough Plastic Container With Handle, , 5 ) Terminals + Ve& - Ve Terminal On Top, , 6 ) Gas Vents Should Be Provided On Top For Each Cell , Split Phase Motor 1 / 2 Hp Single Phase 250 V - Specification : 1 ) Type Split Phase With C.F Switch, , 2 ) Frequency 50 Hz, , 3 ) Voltage 230-250 V, , 4 ) Number Of Poles 4 ( 5 ) Degree Of Protection Ip65, , ( 6 ) Synchronous Speed 1500 Rpm, , 7 ) Output Rating 0.5 Hp, , 8 ) Mounting Horizontal Foot-Mounted, , 9 ) Terminal Box¹ With Terminal Box 10 ) Confirming Is : 325 11 ) Enclosure Ic410 – Spdp , Portable Extention Ladder Aluminium 6 To 9 Meters - Specification : 1 ) Size 6 To 9 Mtrs, Collapsible With Pully, Rope & Locking Hooks 2 ) Material Heavy Duty Alluminium ( Hindalco ) 3 ) Steps Type 1” Dia 66.5 Bottom Width 15” ( 4 ) Feets Rubber Grip Feets 5 ) Type Portable Extension Ladder , , , ( 6 ) Main Frame: This Ladder Should Made Up Of Aluminium Alloy “C” Section 66*32*3.18 Mm Thickness. , Chain Pulley Block Capacity With Tripod Stand 3 Ton - 1. Standard Lift 15 M, , 2. Throat Opening 23.2 Mm, , 3. Capacity 3 Ton, , 4. Test Load 4.5 Ton , , 5. Length 182 Mm, , 6. Load Chain Dia 8 Mm, , 7. Number Of Fall 2, , 8. Effort Required To Lift Max Load 298 N, , 9. Head Room 532 Mm, , 10. Width 174 Mm, , 11. Net Weight 26 Kg , , 12. Items In Pack, , 13. Tripod Stand For Chain Pully Block, , 1 Piece, , 14. Size 3 Mtr, , 15. Height 3 Mtr, , 16. Max Load 3 Ton , Field Regulator 0-1000 Ohm, 2Amp - 1. Standard Lift 15 M 2. Throat Opening 23.2 Mm, , 3. Capacity 3 Ton , , 4. Test Load 4.5 Ton , , 5. Length 182 Mm , , 6. Load Chain Día 8 Mm , , 7. Number Of Fall 2 , , 8. Effort Required To Lift Max Load 298 N, , 9. Head Room 532 Mm , , 10. Width 174 Mm , , 11. Net Weight 26 Kg , , 12. Items In Pack , , 13. Tripod Stand For Chain Pully Block 1 Piece , , , 14. Size 3 Mtr , , 15. Height 3 Mtr , , 16. Max Load 3 Ton , , 17. No Of Poles , Fire Extinguishers Dry Chemical 5 Kg - Specification :1 ) Capacity ( In Kg ) 05 Kg, Type- Abc 2 ) Is Specification Is:2171 3 ) Jet Range ( In Mtrs. ) 4-5 4 ) Discharge Time ( In Secs. ) 15-20 5 ) Min. Discharge Quantity 90% 6 ) Seal Of Approval Isi , Crimping Tool 25 Mm - 1 ) Crimping Capacity : 6 Mm To 25 Mm, , 2 ) High Precision Cast Head For Optimum Compression., , 3 ) Ratchet Control Mechanism Ensures Precise Controlled Crimping Cycle. , , 4 ) Emergency Release Lever For Detachment Of Ratchet Control During Crimp Cycle , , 5 ) Automatic Opening Of Crimp Tool On Completion Of Crimp Cycle., , 6 ) Ergonomically Designed Moulded Plastic Handles For Reduction Of Operator Fatigue., , 7 ) Material Of : A ) Jaw Set: Carbon Steel Grade Scm440., , B ) Frame: Material Steel Grade S45c. , , C ) Handles : Pp , , 8 ) Length: Approx. 360Mm. , Bar Magnet - Specification: 1 ) Size 100 X 6 X 20 Mm 2 ) Material Alnico 3 ) Shape Rectangular 4 ) Color Red, Blue With Poles Marking 5 ) Magnetic Output Medium Strength , Wheat Stone Bridge With Galvonemeter And Battery - Specification : 1 ) Broad, Heavily Plated Brass Strips Should Be Mounted On Polished Hardwood Base. 2 ) Terminals With 4 Mm Sockets Should Be Provided 3 ) 4 Swg Constantan Wire Should Be Stretched Along The Top Of A Meter Scale In Mm And Cm 4 ) Should Be Supplied With Jockey 5 ) Dimensions: 1.13 Mm X 80 Mm X 50 Mm ( Approx. ) 6 ) Two Gap 7 ) Should Provided With Galvanometer & Battery , Rawal Tool Holder $ Bit No. 8, 10, 14, & 16 - Specification : 1 ) Length: 153Mm±1 Mm 2 ) Diameter: 20Mm±0.2Mm 3 ) Angle Of Point : 45Degree 4 ) Hardness: 30-35Hrc 5 ) Pointdiameter: 8Mm, 10 Mm, 14 Mm, & 16Mm. 6 ) Bit Material: Carbon Steel 7 ) Holder Material: Ms Hexagonal Bar , Horse Shoe Magnet - 1 ) Size 50 Mm, Horse Shoe Shape 2 ) Magnet Material Alnico 3 ) Magnetic Output Medium Strength 4 ) Thickness 6 Mm 5 ) Color Red And Blue With Poles Marking , Drill Bit 6Mm , 8Mm , & 10 Mm - 1 ) Compliance: Confirming To Is: 5101 – 1991 2 ) Drill Diameter Ød: Ø6.0 Mm, Ø8.0 Mm, & Ø10.0 Mm 3 ) Shank: Parallel 4 ) Material: Hss-M2 5 ) Finish: Milled / Ground 6 ) Hardness: 760 Hv To 900 Hv 7 ) Surface Treatment: Bright Finish 8 ) Suitable Wooden / Plastic / Metal Box For Storage , Demonstration Table 2.5X1.25X0.75 Meter - 1 ) The Overall Size Of The Work Bench Shall Be 2500Mm ( W ) X 1250Mm ( D ) X 750Mm ( H ) 2 ) Components A ) Main Leg Assembly: The Main Legs Used In The Entire System Are Fabricated By Co2 Welded Ms Tube Of Section 50 Mm X 50 Mm X 5 Mm Thick, , 2 ) Worktop 25 Mm Thick Laminated With Pvc Edge Band. 3 ) Work Top Shall Be Made Of 25Mm Thick & 1 Mm Thickformica Laminated Ply Wood , Primary Current Injection Set 220V, 59Hz, 1-Q, Output - Display Type Digital Accuracy ( % ) Grater Than 1.0Percent ( F. S ) . Supply Ac Control With The Help Of Manual Auto Transformer ( According To Customer Demand ) Current Source 10 To 200 Amp ( According To Customer Demand ) . Condition New Measuring Isolated Ct For Current Output, Digital Voltmeter For Voltage Output Output Power 6.0V ( According To Customer Demand ) . Up To 15Kva Protection A ) Overload B ) Open Circuit C ) Over Temp. Timer Control Circuit Modes 0.001 To 99999Ms, Accuracy 0.1 Percent Of Reading Plus Minus1ms Warranty 1 Year Against Manufacturing Defects & Extended Optional. Input Voltage Single Phase 230V Ac, 50Hz Protected With Mcb & Hrc Fuse , Or As Per Customer Demand Operation Time 1Min On, 5Mins Off. External Current Meter Range 100A To 200 A, Accuracy 1 Percent Of Reading, Plus Minus 20 Ma Timer Stop Input Voltage Input ( 24 To 300 V, Dc Or Peak Ac ) , Dry Contact Input, Or Removal Of Primary Current , Hot Wire Ammeter 0-15 Amps - Specification : 1 ) Type : Hot Wire , , 2 ) Range : 0 To 15 Amp. , , 3 ) Accuracy : Class 1.5 , , , 4 ) Size : Portable, Should Be Enclosed In Bakelite Case , , 5 ) Can Be Measure Ac / Dc Current , Vaccume Gauge 0 To 760 Mm Of Hg. - 1. Inches Of Mercury ( Hg ) On A Scale Of 0 To 30, And The Metric Equivalent. Size = 4” Dial Metal Body , , 2. Rubber Hose Pipe To Connect Combustion Chamber, , 3. Should Be Supplied In Wooden / Plastic Box With Proper Cushioning Total Quantity : 1

Contract Date: Ref. Documents Contract Value : ₹ 4.45 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 6

Maharashtra View Result →

TenderDetail

Loading tenders