View Bid Results For Alluminium Armoured Cable Tenders

We found 6875 Bid Results related to alluminium armoured cable tenders. You can find Contractor details who won alluminium armoured cable tenders along with contract details in Bid awards announcements section.

Filters
Stage
5239
910
726
Tender Publishing Platform
1439
5436
State / UT
39
999
997
733
478
471
336
329
309
291
235
232
193
164
130
101
91
89
84
82
72
68
62
53
52
46
30
26
21
21
19
19
12
7
6
6
5
3
2
1
Contract Value
1853
1645
2766
591
Publish Date
27
4
0
0
0
Sector
31
1882
1076
720
553
532
491
435
161
152
142
118
89
81
70
62
38
36
36
29
27
25
17
16
15
14
13
11
11
8
8
6
Ownership
7
3275
1905
1029
546
103
11
5
Within keyword
Active filters:
Showing 1–50 of 6875 tenders matching your filters
1.
Youth Affairs and Sports and Culture #11506047 AOC
Repairing And Maintenance Of Transformer And Other Ht Equipments Installed At Government School Village Playground Velim Salcete Goa (Iind Call) -Servicing ofHT Main Cubical Metering Unit including repairs,maintenance of the panel by a) Opening of Cubical Metering unit, Cleaning of Internal cable terminal, CT, PT unit, Busbar repairing the damaged parameters etc.b) Application of Antitracking Spray to CT, PT, Cable Terminal to improve IR value avoiding moistures and shot circuits inside panel c) checkig the insulcoat and reapplication of Alternate layer of insulcoat Part A & B mixture one by one for panel safety as per the Electricityrulesd) Testing and Commissioning of cubical Metering Unit and restarting the panel supply. 2 Painting of the LBS by Removal of rust by scrapping panel and repainting the main panel & Check Cubical Metering Unit Painting with material 3 Repairing, Servicing & Commissioning of the 11KV Ring Main Unit 4 Servicing of 11KV Load Break Switch including repairs due to the flash over occured, theswitch needs tobe opened and cleaned including to removemoisture antitracking and application of insulcoat alternate layer Part A & B mixtue one by one. 5 Painting of Load Break Switch with Material 6 Supply & Installation of 30Amps HRC Fuse and Commissioning 7 160 KVA, 11/0.433KV Transformer painting with material 8 Maintenance of 160KVA, 11/0.433KV Transformer by carring out a) Transformer main tank oil filtrationb) BDV value testing of transformer oil before filtration and after filtrationc) identifying oilleakage and rectification work of same with required labour and material cost d) Transformer testing and commissioning 9 Supply & Top up of Transformer oil 10 Supply & Installation of Silica Gel breather 11 SubStation Yard Painting with material 12 LT Main Panel Maintenance Work Panel Servicing, Replacement of defective MCB, replacement of damaged wirringcleaning of the panel etc. 13 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC coverhaving locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil.c)Watering GI pipe, 20mm, Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In soily strata 14 Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft blackagriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement (plumbing will be paid seperately).In soily Strata 15 Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) 16 Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required 17 Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required 18 Supply of4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm 19 Supply of2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 2 Core 2.5 sq.mm 20 Supplying and erecting integrated LED street light fitting 120W IP65 & IK08 class having single piece pressure die-cast aluminium housing,aving system lumens output of Min. 13000 Lumens, min. efficacy of 110 lumen/W, CRI>70,CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty of Make Philips/Crompton/Wipro/KasperNet/Jaquar/surya as directed by Engineer incharge. 21 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warrantyMake Philips/Crompton/ Wipro/KasperNet/Jaquar/surya as directed by Engineer incharge. 22 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty of make of make Kasper T NET/Philips/Lighting Technology/ Jaquar/surya as directed by Engineer Incharge. 23 Supplying and erecting LED square / circular Max. 14 W downlighter/Panel Light having pressure die-cast aluminium housing, polystyrenediffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. rippleof 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.of make Kasper T NET/Philips/ Lighting Technology/Wipro as directed by Engineer Incharge. 24 Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A 25 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata 26 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc.complete as required
Contract Date: Jul 06, 2026 Contract Value : 10.13 Lakh
Government Departments No of Bidders 4
2.
Defence #11503876 Technical Bid
Tender for Excavating In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth In Any Type Of Soil For Laying Of Cable Or Pipes, Trimming The Sides, Forming Bottom Surfaces To Required Level, N.Exc 10 Sqm On Plan And Getting Out, Complete All As Specified And Directed. , Returning, Filling, Including Spreading, Leveling, Watering And Well Ramming In Layers Not Exceeding 25 Cm Thick, Complete All As Specified And Directed. , Removing Surplus Soil To A Distance N.Exc 50M And Deposited Where Directed At A Level Not Exceeding 1.50 M Above The Starting Point, Complete All As Specified And Directed. , Sand Cushioning To Under Ground Cable Laid In Trenches For Laying Of Ht/ Lt Ug Cables 8 Cm Wide Before Laying The Cable And 15 Cm After Laying And Punned Down To A Depth Of 10 Cm As Per Mes Ssr Part-I (2009), Complete All As Specified And Directed. Note: Punned Thickness Shall Be Measured And Paid To The Contractor. , Supplying And Laying Un-Reinforced Precast Concrete Cable Cover, Class Hv, Type 1, Flat Size 300Mm X 180Mm X 40Mm. , Supply, Laying, Jointing And Testing And Commissioning Aluminium Conductor Cable, Xlpe Insulated, Pvc Inner Sheathed, Gi Strip Or Wire Armoured And Overall Pvc Sheathed, Heavy Duty 11000 Volts Laid In Trenches/ On Surface Of Wall/ In Gi Pipe Including Dressing And Clamping The Cable With Ms Zinc Passivated Clamps And Fixing Suitable Thimbles/Lugs Including Cable Glands Of Suitable Size Etc Of Cross-Sectional Area 120 Sqmm 3 Core, Complete All As Specified And Directed . , Supply, Laying, Jointing And Testing And Commissioning Aluminium Conductor Cable, Xlpe Insulated, Pvc Inner Sheathed, Gi Strip Or Wire Armoured And Overall Pvc Sheathed, Heavy Duty 11000 Volts Laid In Trenches/ On Surface Of Wall/ In Gi Pipe Including Dressing And Clamping The Cable With Ms Zinc Passivated Clamps And Fixing Suitable Thimbles/Lugs Including Cable Glands Of Suitable Size Etc Of Cross-Sectional Area 95 Sqmm 3 Core, Complete All As Specified And Directed . , Taking Out Existing Old Damaged/ Unserviceable Ht Ug Cable Of Any Size From Trenches/ Duct/ Pipe Including Jointing Kit, Complete All As Specified And As Directed. , Supply And Laying Gl Tubing 80Mm Bore Light Grade With Fittings Laid In Trenches, Floors/ Roads/ Wall/ Poles For Protection Of Ht Underground Cables Including Taking Down Old Unserviceable Pipes, Complete All As Specified And As Directed. , Steel Tubular Swaged Pole, Type 410 Sp 55 (Overall Length 11.00 Meter) Conforming To Is-2713 (Part 1 To 3) 1980 Complete With Cast Iron Base Plate, Finial Taper Plug, Bolts, Nuts And Washers, Screws. Pole Shall Be Painted With Two Coat Of Black Bituminous Throughout Internally And Externally Upto Planting Depth And The Remaining External Portion Shall Be Painted With Two Coats Of Aluminum Paints Over A Coat Of Red Oxide Primer Including Painting From Bottom To 1.2M Height Alternatively With 30Cm Red And White Strip And Writing Pole No With Black Paint On Yellow Background Complete All As Specified And As Directed. Note: Excavation And Earth Work, Plain Cement Concrete In Foundation And Coping Shall Be Measured And Paid Separately. , Dismantling Old Unserviceable Pcc/ Steel Tubular Poles/ Struts, Any Type And Size, Complete All As Specified And As Directed. , Outdoor Cable End Termination Joint Cold Shrinkable Type Suitable For 3 Core 11 Kv Grade Xlpe Insulated Cable Of Size 120 To 185 Sqmm Complete All As Specified And As Directed. , Outdoor Cable End Termination Joint Cold Shrinkable Type Suitable For 3 Core 11 Kv Grade Xlpe Insulated Cable Of Size 50 To 95 Sqmm Complete All As Specified And As Directed. , Cross Arms, Bracings, Supports, Clamps And Back Plates Fabricated From Structural Steel, Sections (Ms Channel) Of Required Size And Shape Including Nuts, Bolts, Washers, Welding, Bending, Cutting Cold Or Hot, Drilling Holes For Inserting Bolts As Indicated And Directed Including Painting With One Coat Of Red Oxide Primer And Two Coats Of Silver Aluminium Paint, Complete All As Specified And Directed. , Dismantling Of Old Rusted Cross Arms, Bracings, Supports, Clamps And Back Plates Of Any Sections From Poles And Setting Aside, Complete All As Specified And Directed At Site. , Materials And Labour For Earthing Complete With Galvanised Iron Earth Plate Electrode 60Cm X 60Cm X 6Mm Thick, Buried Directly In Ground, Earth Pit Not Less Than 2.25 Mtr Deep Below Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Ground Level Connected With Gi Strip Of Size 25Mm X 4Mm By Means Of Nuts, Bolts, Check Nuts And Washers Made Of Galvanised Iron Or Steel Earthing Lead To Be Protected By Galvanised Iron Pipe Of 40Mm Bore (Light Grade) And Other End Connected To Earthing Test Point Or Lightening Arrestor Of Main Controlling Switch As Directed Including Providing Funnel With 20 Mm Bore Galvanised Iron Pipe (Medium Grade), Wire Mesh, Charcoal Or Coke And Common Salt In Alternate Layer Of 15 Cm (Compacted Thickness) All Round The Earth Electrode, Concrete Earth Pit In Plain Cement Concrete (1:3:6) Type C-1 (With 20 Mm Graded Aggregate), 50Mm Thick Precast Reinforced Cement Concrete (1:2:4) Cover Slab Reinforced With 8Mm Dia Tmt Bar @ 15Cm C/C Bothways And Suitable Handle Made Of10mm Dia) Including Necessary Earth Work In Excavation, Refilling, Filling And Removal Of Surplus Earth Upto A Distance Not Exceeding 50M Etc All As Shown On Electrical Plate No. 3 Of Mes Schedule Part-I (2009) Complete Including Testing On Completion Including Taking Down Old Unserviceable Earthing Set All As Specified And As Directed. Note:- (I) Main Earthing Strip From Earth Plate Electrode To Test Point Upto Length Of 7.5 Meters Length Shall Deemed To Be Included In The Unit Rate Quoted Against This Item. (Ii) On Testing After Completion If The Desired Resistance Is Not Obtained The Contractor Shall Redo The Earthing Without Any Extra Cost To The Department. , 11 Kv Do Fuse Set Porcelain Type Supply Rating 11000 Volt & Current Rating 200A Electrical Trasmission & Disturbution Manufacturing & All Fittings Dmc Insulator, Fuse Base, Lt Stay Set, Main Switch, Metal Hook And Piercing Connector, Comlete All As Specified And Directed. , Triple Pole Mechanically Operated Air Break Isolator (God), Vertical Mounting, Rotating Type, Mounted On Insulator And Steel Frame With Operating Mechanism Worked From Ground Level Complete In All Respect Such As Gun Metal Moving Contacts And Spring Loaded Gun Metal Fixed Jaws, Knife Copper Jumper Strip Etc, Suitable For 11000 Volts Grade, 50 Hz, With 9 Insulator Of Rating Upto 200 Amp, Complete All As Specified And As Directed. , Dismantling Triple Pole Mechanically Operated Air Break Isolator (God) Vertical/ Horizontal Mounted Including Insulators And Operating Mechanism Complete All As Specified And As Directed. , Ht Outdoor Expulsion Type Lightening Arrestor With Mountings Accessories Complete Fixed On Cross Arms Of Two Pole Structure/Gl Flat Strip And Connect With Same Size Of Acsr Conductor With All Fittings Connected To Earth Strip With Nut, Bolt, Washer Transmission Dass Having Discharge Capacity Of 65 Kilo Amps And Suitable For Working Pressure 11 Kv Complete All As Specified And Directed. , Dismantling Of Old Unserviceable Lightening Arrestor 11 Kv, Complete All As Specified And Directed. , Aluminium Conductor Steel Reinforced (Acsr) For Making Of Four Pole Structure In Sub Stations As Per Existing, Complete All As Specified And Directed. , Dismantling Of Old Acsr Conductors Of Any Type And Any Size, Complete All As Specified And Directed. , Plain Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Crushed Stone Aggregate) As In Foundation For Poles, Complete All As Specified And Directed. , Plain Cement Concrete 1:2:4 Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Coping For Poles Including Necessary Formwork, Complete All As Specified And Directed. , Danger Notice Plate Of 25Cm X 20Cm Size And 1.6Mm Thick Mild Steel Sheet, Vitreous Enamelled White, With Letters (Local & Hindi Language) Figures, And Conventional Skull And Bones In Signal Red Colour And Fixed With Ms Clamps, Bolts And Nuts Of Approved Size, For Ht Pole, Complete All As Specified And As Directed. , Stay Assembly With 20Mm Dia Gi Stay Rod 1900 Mm Long Including Mild Steel Stay Plate 300 Mm X 300 Mm X 6 Mm And Galvanised Thimble, Galvanised Steel 14 Mm Dia 400 Mm Long Stay Bow And Gi Nuts, Washers Including Loop Type Insulator Vitreous Porcelain White, Brown Or Green Big Size With Overall Dimensions 90 Mm X 140 Mm Clearance Of Hole 25.5 Mm Complete All As Specified And Shown In Electrical Plate No 01 Of Ssr Part - I Including Taking Down Old Unserviceable Stay Assembly Complete All As Specified And Directed. (Note:-Loop Type Insulators, Stay Clamps, Excavation And Concrete Will Be Measured And Paid Separately) , Stay Assembly With 20Mm Dia Gi Stay Rod 1900 Mm Long Including Mild Steel Stay Plate 300 Mm X 300 Mm X 6 Mm And Galvanised Thimble, Galvanised Steel 14 Mm Dia 400 Mm Long Stay Bow And Gi Nuts, Washers Including Loop Type Insulator Vitreous Porcelain White, Brown Or Green Big Size With Overall Dimensions 90 Mm X 140 Mm Clearance Of Hole 25.5 Mm Complete All As Specified And Shown In Electrical Plate No 01 Of Ssr Part - I Including Taking Down Old Unserviceable Stay Assembly Complete All As Specified And Directed. (Note:-Loop Type Insulators, Stay Clamps, Excavation And Concrete Will Be Measured And Paid Separately)
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
Contract Date: Ref. Documents Contract Value : 4.19 Lakh
Local Bodies No of Bidders 1
5.
Road Transport and Highways #11501093 AOC
Bids Are Invited For Spares For Wmm Plant Wilson Cap 60 Tph Wmloc-506-9-07 Carrier Roller 89X200 - Wmm Plant Wilson 60 Tph Cap , Wmloc-506-9-08 Return Roller 89X630 - Wmm Plant Wilson 60 Tph Cap , Wmloc-506-9-06 Belt Conveyor 17800X600X4 Ply - Wmm Plant Wilson 60 Tph Cap , Nk Reduction Gear Box Oil Seal 75-115-10 - Wmm Plant Wilson 60 Tph Cap , Nk Reduction Gear Box Oil Seal 30-62-10 - Wmm Plant Wilson 60 Tph Cap , Wmsc-506-3-07 Carrier Roller 89X200 - Wmm Plant Wilson 60 Tph Cap , Wmsc-506-3-08 Roller Return 89X630 - Wmm Plant Wilson 60 Tph Cap , Wmfbf-506-2-04 Gathering Roller 89X200 - Wmm Plant Wilson 60 Tph Cap , Wmfbf-506-2-06 Return Roller 89X630 - Wmm Plant Wilson 60 Tph Cap , Wmfbc-506-1-23 Gear Box Adjusting Bolt - Wmm Plant Wilson 60 Tph Cap , Wmfbf-506-2-17 V Belt B-54 - Wmm Plant Wilson 60 Tph Cap , Wmfbf-506-2-18 Dc Motor 2Hp - Wmm Plant Wilson 60 Tph Cap , Wmfbc-506-1-07 Head Roller - Wmm Plant Wilson 60 Tph Cap , Wmfbc-506-1-08 Tail Roller - Wmm Plant Wilson 60 Tph Cap , Wmfbc-506-1-11 Return Roller 89X500 - Wmm Plant Wilson 60 Tph Cap , Wmfbc-506-1-19 V Belt B-52 - Wmm Plant Wilson 60 Tph Cap , Wmfbc-506-1-14 Belt Conveyor 2300X450X4 Ply - Wmm Plant Wilson 60 Tph Cap , Nk Reduction Gear Box Seal 65-100-10 - Wmm Plant Wilson 60 Tph Cap , Nk Reduction Gear Box Seal 23-52-10 - Wmm Plant Wilson 60 Tph Cap , Nk Flexibile Cable 4 Core Copper 2.5 Sq Mm - Wmm Plant Wilson 60 Tph Cap , Nk Bin 3 Motor Drive Dc Card - Wmm Plant Wilson 60 Tph Cap , Nk Potentiometer 10K Ohms - Wmm Plant Wilson 60 Tph Cap , Wmpm-506-5-02 Tips - Wmm Plant Wilson 60 Tph Cap , Wmpm-506-5-08 Bolt For Tip With Nut M-16 - Wmm Plant Wilson 60 Tph Cap , Wmpt-506-7-05 V-Belt C-58 - Wmm Plant Wilson 60 Tph Cap , Nk 4 Core 50 Sq Mm Armoured Cable Aluminium - Wmm Plant Wilson 60 Tph Cap , Wmpm-506-5-03 Bolt For Bearings M-20 - Wmm Plant Wilson 60 Tph Cap , Wmpm-506-5-04 Nut And Washer - Wmm Plant Wilson 60 Tph Cap , Nk Contractorlc1D093-460Ac3 9A-440V - Wmm Plant Wilson 60 Tph Cap , Nk Contactorlc1D093-460Ac3 63A-440Vac3 63A-440V - Wmm Plant Wilson 60 Tph Cap , Nk Cable Leg 50Mm - Wmm Plant Wilson 60 Tph Cap , Wmdh-506-6-9 Bolt M-12 - Wmm Plant Wilson 60 Tph Cap , Wmdh-506-6-10 Nut M-12 - Wmm Plant Wilson 60 Tph Cap , Wmvc-506-4-08 Bolt For Spring M-25 - Wmm Plant Wilson 60 Tph Cap , Wmvc-506-4-09 Castle Nut M-25 - Wmm Plant Wilson 60 Tph Cap , Wmvc-506-4-10 Washer - Wmm Plant Wilson 60 Tph Cap , Wmvc-506-4-11 Split Pin - Wmm Plant Wilson 60 Tph Cap , Wmvc-506-4-15 Eccentric Wt - Wmm Plant Wilson 60 Tph Cap Total Quantity : 381
Contract Date: Ref. Documents Contract Value : 7.97 Lakh
Government Departments No of Bidders 6
Arunachal Pradesh View Result →
6.
Public Administrative Department #11499188 AOC
Tender For Annual Plan-Electrification of Homeo at Melattur GP,Malappuram-Proj No:S0358/25-General Electrical Work - Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 3 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire 4 1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 5 1.14.3:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire 6 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm 7 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 8 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 9 1.56:Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 10 1.32:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 11 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 12 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture 13 90.3.22.3:Supply & installation of light fittings on flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet of .5mm thickness complete with all accessories andlamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture 14 90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell 15 90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 16 OD297261/2025-2026:Supply, Conveyance, Installation, testing and commissioning of 400mm sweep metal blade type wall mounting fan (Orient,Havells,Bajaj,Crompton or Approved Equivalent brand) 17 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 18 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 19 1.24.8:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push 20 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. 21 OD297257/2025-2026:Supply and fixing of 9W LED Bulb, as required 22 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 23 2.3.4:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door 24 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 25 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 26 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 27 90.12.7.3:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp 28 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) 29 9.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm) 30 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) 31 2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts C curve DP MCB complete with connections, testing and commissioning etc. as required. 32 OD297368/2025-2026:Supply and installation of dust and vermin proof Syntex meter board (350x250x150) too fix KSEB meter, fuse units, GI support pipe and stay wire including fixing on wall 33 OD297367/2025-2026:Supply and fixing 32A, Bakelite HRC fuse with HRC fuse link with connection in the existing meter board 34 OD297366/2025-2026:Supplying and fixing 32A, 2 way Neutral link mounted on DMC/SMC base with connection in the existing meter board 35 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 36 5.17:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 37 OD297254/2025-2026:Supply, providing and fixing 2 x 25 x 3mm GI strip test joint and providing 25x6mm brass nut and bolt etc. and connection as required for earthing system 38 OD297260/2025-2026:Supply, providing and fixing 25 x 3mm GI Strip earth lead from the test joint to earth plate 39 OD297258/2025-2026:Charges for preparation of KSEB or KSELB test Report, drawings and other related documents etc as required by the contractor as per the instruction from the Assistant Engineer and submit it to the concerned KSEB section office or KSELB including application fee. Copy of application fee and related documents are to be submitted to the concerned Assistant Engineer. 40 1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
Contract Date: Jul 04, 2026 Contract Value : 90,618
Government Departments No of Bidders 2
7.
Agriculture #11498195 Technical Bid
Tender For Electrical Spares Items , Electrical Spares Items , {Electrical Store/Material} Mcb 100A 4P 5Sp43917Rc Make: Siemens (El1042) , Electrical Store/Material} Mcb 10A Single Pole 5Sl42167Rc Make: Siemens (El0828) , {Electrical Store/Material} Mcb 10Amp.3Pole 5Sl63106Rc Make : Siemens (El0883) , {Electrical Store/Material} Mcb 16 Amp. 3 Pole () , Electrical Store/Material} Mcb 32A 2P Bb30320C Make : L&T (El0941) , {Electrical Store/Material} Mcb 32Amp Single Pole 5Sl61327Rc Make : Siemens (El0940) , {Electrical Store/Material} Mcb 40Amp 2Pole 5Sl6240-7Rc Make : Siemens (El0825) , {Electrical Store/Material} Mcb 40Amp Single Pole 5Sl61406Rc Make : Siemens (El1027) , Electrical Store/Material} Mcb 4A 2 P 5Sl63047Rc Make : Siemens (El0884) , Electrical Store/Material} Mcb 50A 3P 5Sl43507Rc Make: Siemens (El1253) (478) , {Oil & Lubricant} Grease Unirex N-3 (Ol0022) Grease Unirex N3, Make - Mobil Grease , {Oil & Lubricant} Roll Garud Grease (Ol0014) , {Oil & Lubricant} Survo Grease Castrol Ball Bearing Ap-3 (Ol0002) Grease Ap3 Castrol Spheerol Cv-30K (479 , {Electrical Store/Material} Mcb 1P,20Amp,415V Ac , 5Sl41207Rc (El0453) , Electrical Store/Material} Mcb 25 Annual Periodical Maintenance Single Pole (El0454) , Electrical Store/Material} Mcb 2P,10Amp,415V Ac , 5Sl42107Rc (El0457) C-Curve, Make -Siemens , {Electrical Store/Material} Mcb 2P,25Amp,415V Ac , 5Sl42257Rc (El0452) , Electrical Store/Material} Mcb 3P,25Amp,415V Ac , 5Sl43257Rc (El0455) C-Curve , Electrical Store/Material} Mcb 40 Annual Periodical Maintenance 3 Pole (El0456) Type -5Sl63407Rc, C-Curve, 240/415Vac, Make -Siemens , Electrical Store/Material} Mcb Dp 63 Annual Periodical Maintenance (El0432) Type -I-5Sl62637Rc, C-Curve, 240/415 Vac, Make - Siemens (483) , Electrical Store/Material} A B Contector Ml-6 440 V (El0176) Coil Voltage 415 Vac , Electrical Store/Material} A.B.(Power)Contactor 3Tf3400, 110Volt (El0190) Coil Voltage 110 Vac , Electrical Store/Material} Air Break Contractor 3Tf-35.230V. (El0491) Coil Voltage 220 Vac , Electrical Store/Material} Air Break Contractor Ml-4.440V. (El0175) Coil Voltage 415 Vac , Electrical Store/Material} No Volt Coil Ml-4, 240 Volt (El0472) Coil Voltage 220Vac , Electrical Store/Material} Spare Contact Kit Ml-6,Ss95313Oooo Make L&T (El1005) , Electrical Store/Material} Spare Kit 3Tf34,(32A),3Ty7340-Oc (El0615) , Electrical Store/Material} Spare Kit 3Tf-35,(38A),3Ty7350-Oc (El0616) , {Electrical Store/Material} Spare Kit 3Tf47,(63A),3Ty7470-Oya (El0617) , Electrical Store/Material} Spare Kit A.B. Contactor Ml-4 (El0614) (512) , Electrical Store/Material} Bus Bar Insolator Porceline (El0997) Size 4, Model -Sp65, Meterial Porcelain , {Electrical Store/Material} C.R.C. 2- 226 (El0047) , Electrical Store/Material} Carbon Brush Holder 4 Kw 6 Hp (El0174) Kanchi Type Carbon Holder Carbon Brush Size (8X16X25)Mm For 4Kw Bbl Make Slipring Motor , Electrical Store/Material} Contact Cleaner Spary 630,4S (El0042) , Electrical Store/Material} Copper Cable Flexible, 1.5 Mm, 12 Core (El0150) Un Armoured , {Electrical Store/Material} Current Collection 150 103 30 (El1498) Meterial -Cast Iron , {Electrical Store/Material} Insulator For Bushbar (El0998) Size 4, Model -Sp65, Meterial Dmc , Miscellaneous / General Store A/C} Lock Tite 641 50Ml (Gn0155) , Instrumentation/ Instrument Store A/C} Male-Female Connector For Feedback Sensor Make - Energy-Tech Part Code - Ete-C-0301-1 (Im0328) , {Electrical Store/Material} Thinner 234,Make-Elantas Dr. Beck (El0068) (513) , Electrical Store/Material} Aluminium Thimble 185 Mm (El0687) D - Type , Electrical Store/Material} Copper Thimble 10 Mm (El0679) D - Type , {Electrical Store/Material} Copper Thimble 16 Mm (El0680) D - Type , Electrical Store/Material} Copper Thimble 25 Mm (El0681) D - Type , {Electrical Store/Material} Copper Thimble 35 Mm (El0682) D - Type , {Electrical Store/Material} Copper Thimble 6 Mm (El0678) D - Type , Electrical Store/Material} Terminal Block (Power Supply) Kut-10 , 800 V / 57 A / 10 Sq Mm / 1.2 Nm (El0955) Type- Kut , Electrical Store/Material} Terminal Block (Power Supply) Kut-16,1000 V/76 A/16 Sq Mm/1.2 Nm (El0956) Type- Kut , Electrical Store/Material} Terminal Block (Power Supply) Kut-25, 1000 V / 101 A / 25 Sq Mm / 2.3 Nm (El0952) Type- Kut , {Electrical Store/Material} Terminal Block (Power Supply) Kut-4, 800 V / 32 A / 4 Sq Mm / 0.5 Nm (El0954) Type- Kut , {Electrical Store/Material} Terminal Block (Power Supply) Kut-6, 800 V / 41 A / 6 Sq Mm / 0.8 Nm (El0953) Type- Kut (516) , Electrical Store/Material} A.B.(Power)Contactor 3Tf5102, 220 Volt (El0185) Coil Voltage - 220Vac , Electrical Store/Material} Air Breack Contactor 3Tf 46 230V. (El0186) Coil Voltage - 220Vac , Electrical Store/Material} Air Break Power Contactor 1Sbl141001R8410 ,A9-30-10 ,110V 50Hz / 110-120V 60Hz Make : Abb (El0271) , Electrical Store/Material} Air Break Power Contactor 1Sbl281074R8010,Ax32-30-10-80,Make : Abb (El0274) Coil Voltage - 220Vac , Electrical Store/Material} Air Break Power Contactor 1Sfl431001R8011,A95-30-11-80,Make : Abb (El0275) Coil Voltage - 220Vac , Electrical Store/Material} Air Break Power Contactor 1Sfl431001R8011,A95-30-11-80,Make : Abb (El0275) Coil Voltage - 220Vac , {Electrical Store/Material} Air Break Power Contactor 3Tf32 00 0Bf4,110V Dc, Make : Siemens (El0195) Coil Voltage -110Vdc , Electrical Store/Material} Air Break Power Contactor 3Tf52,230V, 3Ty75230Ap0Make : Siemens (El0184) Coil Voltage - 220Vac , {Electrical Store/Material} Air Break Power Contactor 3Ts47 22-0Ap00-8K,220V, Make : Siemens (El0177) Coil Voltage -220Vac , Electrical Store/Material} Auxiliary Contact Block Ca5-01 Nc, Make : Abb (El0141) , Electrical Store/Material} Auxiliary Contact Block Ca5-10 No, Make : Abb (El0142) , Electrical Store/Material} Power Auxiliary Contactor 3Rt2015-1Ap01 Make: Siemens (El0123) Coil Voltage -230Vac , {Electrical Store/Material} Power Auxiliary Contactor 3Rt2026-1Al20 Make: Siemens (El0127) Coil Voltage -230Vac , Electrical Store/Material} Power Auxiliary Contactor 3Rt2028-1Al20-0Ja0 Make: Siemens (El0125) Coil Voltage -230Vac , Electrical Store/Material} Power Contactor 26-30 (El0189) Model - A26-30-10, Coil Voltage - 220Vac , {Electrical Store/Material} Spare Kit For 3Tf46 Contactor Make :Siemens, 3Ty7460-0Ya (El1146) , {Electrical Store/Material} Spare Kit For 3Tf50 Contactor Make :Siemens,3Ty7490-0A (El1155) , Electrical Store/Material} Spare Kit For 3Tf53 Contactor Make :Siemens, 3Ty7530-0Ya (El1156) (517) , Electrical Store/Material} Air Break Power Contactor Lc1E-1210M7,Coil Volt-220Vac Make : Schneider (El0217) Coil Voltage -230Vac , Electrical Store/Material} Air Break Power Contactor Lc1E-2510M5,Coil Volt-220Vac Make : Schneider (El0213) Coil Voltage -230Vac , Electrical Store/Material} Air Break Power Contactor Lc1E-3210M7,Coil Volt-220Vac Make : Schneider (El0198) Coil Voltage -220Vac , Electrical Store/Material} Air Break Power Contactor Lc1E-40B10M7,Coil Volt-220Vac Make : Schneider (El0210) Coil Voltage -230Vac , {Electrical Store/Material} Air Break Power Contactor Lcie-50,Coil Volt-110Vac Make : Schneider (El0201) Coil Voltage -110Vac , Electrical Store/Material} Auxiliary Contact Block 3Sb5400-0C, 1Nc, Make : Siemens (El0129) , Electrical Store/Material} Dol Starter For 7.5 Hp (El0100) Type - Mnx , {Electrical Store/Material} Relay Mn-5 20 To 33 Annual Periodical Maintenance (El0103) Type - Mn5 , Electrical Store/Material} Single Phase Periventer, 1Spdt Relay, Model - 600 Spp, Nominal Voltage 415 V Ac ( L-L), 3 Phase, 3 Wire, Operating Voltage 154-520 Ac, (L-L ) (El0486) Model - 600Spp , {Electrical Store/Material} Thermal Over Load Relay Mn2 9- 15 Annual Periodical Maintenance Make : L&T (El0489) Type - Mn2 , Electrical Store/Material} Thermal Over Load Relay Mn2 4.5- 5.5 Annual Periodical Maintenance Make : L&T (El0483) Type - Mn2 , Range - 4.5 To 7.5 A , {Electrical Store/Material} Thermal Overload Relay Lre 08, 2.5-4Amp. ,Make : Schneider (El0488) , Electrical Store/Material} Thermal Overload Relay Lre10, 4-6Amp. ,Make : Schneider (El0490) , Electrical Store/Material} Thermal Overload Relay,Lre 07 Easy Pact Tvs,1.6-2.5A, Make : Schneider (El0438) , Electrical Store/Material} Thermal Overload Relay,Lre357 Easypact Tvs,37-50A, Make : Schneider (El0495) (518) , Engineering. Store} Brass O (Gn0009) 5 Ltr , Electrical Store/Material} Connection Plate 18.5Kw(25Hp) Frame Size‐ Vd200L, Make‐ Marathon (El0647) , Electrical Store/Material} Connection Plate 22Kw(30Hp) Frame Size‐ Se180L ,Make Marathon (El0648) , Electrical Store/Material} Frp Rod For Esp Total L.1018 Stright L.814 Tapper L. 102+102 Both Side=204 Dia.50Mm Tapper Dia. 38Mm (Sp1020) , Electrical Store/Material} Star Delta Motor Starter 3 Phase 30-50A Ss94021 (El0651) (519) , Electrical Store/Material} Motor For Bearing Gear 3-Phase Motor Make - Siemens Iec - 60034-1, 1Le75011Db235Ga4-Z, Kw1905 66 30690522, 160M Cm/L - 7200106793, Imb3, Ip55, Thcl 155(F), Voltage - 415, Ampere - 21, Kw - 11, P.F. - 0.8, Eff. - 89.8, Rpm - 1465, De Bearing - 6309 C3, Nde Bearing - 6309 C3 (El1238) , Electrical Store/Material} Motor For Drum Feeder 3-Phase Motor Make - Siemens Iec - 60034-1, 1Le750110 B490Ab4-2, Kw21016630941936, 160L Imb3, Ip55, Thcl 155(F), Voltage - 415, Ampere - 14, Kw - 7.5, P.F. - 0.84, Eff. - 88.7, Rpm - 1470, De Bearing - 6309 C3, Nde Bearing - 6309 C3 (El1233) , Electrical Store/Material} Motor For Stocker 3-Phase Motor Make - Siemens Iec - 60034-1, 1Le76011Ab435Ab4-2, Kw20106630889673, 100L Cm/L - 7200106793, Imb3, Ip55, Thcl 155(F), Voltage - 415, Ampere - 3.3, Kw - 2.5, P.F. - 0.76, Eff. - 84.3, Rpm - 1440, De Bearing - 6206 Zz/C3, Nde Bearing - 6206 Zz/C3 (El1237) , Electrical Store/Material} Motor With Gear Box For Oltc (24 Mva T/F Make Vołtampe 3-Phase Induction Motor Type- 3Nd71F4Po75- B5, Insulation Class-F,Ip55, Duty - S1 Poles-04, Kw-0.55, H.P - 0.75 Voltage -415, Annual Periodical Maintenance - 1.7, Frame 71F, Rpm 1340, Mounting - B5, Serial No 20020003336 (El0421) (520) , Electrical Store/Material} Contactor 3Tf-55 02-0A, 230 Volt (El0172) Coil Voltage 220 Vac , Electrical Store/Material} Contactor 3Tf-56 220 Volt (El0173) Coil Voltage 220 Vac , Electrical Store/Material} Mpcb 3Rv2011-1Ja10 0.7-1.0A,Make: Siemens (El0905) Range - 0.7A - 1.0A , Electrical Store/Material} Mpcb 4-6.3 With Aux Control (El0465) Model - Ms132, Range - 4 A - 6.3A , Electrical Store/Material} No Volt Coil 3Tf-53, 220 Volt (El0766) Voltage - 220Vac , Electrical Store/Material} No Volt Coil For 3Tf 52 (El0110) Voltage - 110Vac , Electrical Store/Material} No Volt Coil For 3Tf 54-55 Contactor (El0767) Voltage - 220Vac , Electrical Store/Material} No Volt Coil For Mnx 9 To 40 Contactor L&T (El0769) Voltage - 110Vac , Electrical Store/Material} No Volt Coil Mnx 95-140 (El0771) Voltage - 110Vac , {Electrical Store/Material} Power Contactor 3Tf -5302 (El0171) Coil Voltage 220 Vac , Electrical Store/Material} Spare Coil 3Tf52, 220 Volt (El0096) Voltage - 220Vac , {Electrical Store/Material} Spare Coil 3Tf56, 220 Volt (El0768) Voltage - 220Vac , {Electrical Store/Material} Spare Coil Mnx-45 80X110V (El0770) Voltage - 110Vac (522) , {Electrical Store/Material} Coil 3Tf-34, 110 Volt (El0478) Coil Voltage - 110 Vac , {Electrical Store/Material} Coil 3Tf-34, 220 Volt (El0479) Coil Voltage - 220 Vac , Electrical Store/Material} Coil 3Tf-46/47 110 Volt (El0474) Coil Voltage - 110 Vac , {Tool& Tackle Store A/C} Cutting Plier 8 (Tt0210) Combination Plier 8, Model - (1621-8) Taparia , Electrical Store/Material} Line Tester Small (El0416) Model - Taparia 813 , {Electrical Store/Material} Megger 1000V, 1000Mω (El0763) Analog Megger, Hand Operated , {Tool& Tackle Store A/C} Screw Driver 8 (Tt0253) Model - Taparia 826 Flat 8 , Tool& Tackle Store A/C} Screw Driver With Line Tester (Tt0037) Model - Taparia 818, 200Mm , {Electrical Store/Material} Sillpring For 3.4Kw,Make-Bbl,Type-Mp13M613,Size-Bore- 50Mm,Outer Dia-84Mm,Length-60Mm,Width Of Ring- 13Mm,Ring To Ring Distance-7Mm (El0761) Slipring For 3.4/4.0 Kw Bbl Make Slipring Motor (523) , Electrical Store/Material} Backtrol Red (El0067) Make - Elantas Beck India Ltd. , {Electrical Store/Material} Insulation Varnish (Elmo Luft-1A), Make-Dr.Beck (El0066) Elmo Luft-1A Golden, Make - Elantas Beck India Ltd. , Miscellaneous / General Store A/C} Nylon Rope 10Mm (Gn0109) , {Electrical Store/Material} Pt Bulb 100 W (El0060) 320 Volt, 100 Watt , {Electrical Store/Material} Pt Bulb 24 Volt Dc 60 Watt (El1070) 24 Volt, 60 Watt , Electrical Store/Material} Pvc Tape 3/4 (El0666) , Electrical Store/Material} Tong Tester Digital Clamp Meter 1000 Annual Periodical Maintenance (Tt0303) Model - Waco 2605A, 1000A Ac/1000A Dc, 1000 V Ac/Dc (524)
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 8
8.
Rural Development #11496870 Technical Bid
Tender for Supplying Material For Gr Anchayat At Ghodegaon Tal Ambegaon Dist Pune. , Item No 1 Supply, Installaton, Testing & Commissioning 32 Ch Ai Sense Network Video Recorder.Facial Recognition, Facial Detection And Analytics Face Picture Comparison, Human Face Capture, Face Picture Search, Face Picture Library, Up To 16 Face Picture Libraries, With Up To 20,000 Face Pictures In Total, Human/Vehicle Analysis 32-Ch Ip Video Input,32-Chincoming Bandwidth-256 Mbps, Outgoing Bandwidth-160 Mbps Hdmi Output1-Ch, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, Fhd 120 ×1080 Decoding Format-H.265/H.265+ /H.264+/H.264, Recording Resolution 12Mp/8Mp/6Mp/5Mp/4Mp/1080P 4 Sata Interfaces, Up To 10 Tb Capacity For Each Hdd , Item No 2 Supply, Installaton, Testing & Commissioning 08 Ch Ai Sense Network Video Recorder.Facial Detection And Analytics, Face Picture Comparison, Human Face Capture, Face Picture Search Face Picture Library, Up To 16 Face Picture Libraries, With Up To 20,000 Face Pictures In Total ,Face Picture Comparison ,Ip Video Input8-Ch, Incoming Bandwidth,80 Mbps, Outgoing Bandwidth,160 Mbps, Hdmi Output,1-Ch, 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 120 × 1080 Decoding Format H.265/H.265+/H.264+/H.264, Recording Resolution12 Mp/8 Mp/6 Mp/5 Mp/4 Mp/3Mp/1080P 2 Sata Interfaces, Up To 10 Tb Capacity For Each Hdd , Item No 3 Supply, Installaton, Testing & Commissioning 6 Mp Smart Light Fixed Bullet Network Camera Resolution-3200×1800, 4-Inch Progressive Scan Cmos Camera Image Sensor, Fixed Focal Lens, 4 Mm Supplement Light Range Up To 30 M Ir Wavelength 850 Nm, In Built Audio/Mic , Item No 4 Supply, Installaton, Testing & Commissioning 4 Mp Smart Light Varifocal Bullet Network Camera Resolution 2560 × 1440, 1/2.-Inch Progressive Scan Cmos Image Sensor, Motorized Varifocal Lens Up To 2.7 To 13.5 Mm, Supplement Light Ir, White Light Illuminator Up To 50 M In Built Audio/Mic , Item No 5 Supply, Installaton, Testing & Commissioning 4 Mp Fixed Bullet Network Camera Resolution 2560 × 1440, 1/2.-Inch Progressive Scan Cmos Image Sensor, Fixed Focal Lens, 2.8, 4, And 6 Mm Optional, Supplement Light Ir, White Light Illuminator Up To 30 M In Built Audio/Mic , Item No 6 Supply, Installaton, Testing & Commissioning 2 Mp Fixed Turret Network Camera Resolution 120 × 1080, 1/2.7-Inch Progressive Scan Cmos Image Sensor, Fixed Focal Lens, 2.8 & 4 Mm Optional, Supplement Light Ir, White Light Illuminator Up To 30 M In Built Audio/Mic , Item No 7 Supply, Installaton, Testing & Commissioning 4Tb Servillance Hard Disk With Online Warranty , Item No 8 Supply, Installaton, Testing & Commissioning 8+2+2 Port Poe Swich 8X10/100/1000Base-Tx Poe Ports And 2X10/100/1000Base-Tx And 2X1000base-X Uplink Ports Net/Fib Support Max Transmission Distance Up To 250M With Poe Power Built-In Power Supply Maximum Power Of Single Poe Port: 30W Maximum Poe Power: 52V 150W Anti Thunder Design Power Circuit Protection , Item No Supply, Installaton, Testing & Commissioning 4+2+2 Port Poe Swich 4X10/100/1000Base-Tx Poe Ports And 2X10/100/1000Base-Tx And 2X1000base-X Uplink Ports Net/Fib Support Max Transmission Distance Up To 250M With Poe Power Built-In Power Supply Maximum Power Of Single Poe Port: 30W Maximum Poe Power: 52V 150W Anti Thunder Design Power Circuit Protection , Item No 10 Supply, Installaton, Testing & Commissioning Sfp Trancereciver 10G Sfp Lc Type. High-Speed 10Gbps Data Transmission Over A Single Strand Of Fiber. Including Fiber Patch, Patch Cord, Splicing, Com Box , Item No 11 Supply, Installaton, Testing & Commissioning Outdoor Pole Mount 4U Poe Racks Voltage Protection /Two Pole Mcb /13A 2 Socket, Solar Battery Charging Unit /Cooling Fan / Dc Female Socket Rack Size: Height: 400Mm, Width: 330Mm, Length: 300Mm , Item No 12 Supply, Installaton, Testing & Commissioning 8 Port Smart Gigabit Poe Switch Smart Managed/Un Managed 8-Port Gigabit Poe Switch Poe Standard Ieee 802.3Af, Ieee 802.3At Switching Capacity 20 Gbps, Packet Forwarding Rate,14.88Mpps, Max. Port Power, 30 W Poe Power Budget, 110 W Max. Power Consumption,130 W Mac Address Table 8 K Surge Protection 6Kv Power Supply 48 Vdc, 2.5 A , Item No 13 Supply, Installaton, Testing & Commissioning 8 Port Sfp 2E Gigabit Fiber Switch 8 Port Sfp Slots 1.25G Supported Fiber Switch With Sfp Module (2 Pair, Smsf 20Km) Speed: Supports 10/100/1000 Mbps Data Transfer Speeds For Both Fiber And Copper Connections. Technology: Functions As An Unmanaged Media Converter Switch, Supporting The Conversion Between 10/100/1000Base-Tx And 1000Base-Sx/Lx. , Item No 14 Supply, Installaton, Testing & Commissioning 4 Port Sfp 2E Gigabit Fiber Switch 4 Port Sfp Slots 1.25G Supported Fiber Switch With Sfp Module (2 Pair, Smsf 20Km) Speed: Supports 10/100/1000 Mbps Data Transfer Speeds For Both Fiber And Copper Connections. Technology: Functions As An Unmanaged Media Converter Switch, Supporting The Conversion Between 10/100/1000Base-Tx And 1000Base-Sx/Lx. , Item No 15 Supply, Installaton, Testing & Commissioning solar Power Poe Switch With 1 Sfp Uplink 4-Port 10/100/1000Mbps,1 Sfp Uplink, Power Equirements-~48V Dc, Ip40 Metal Case Enclosure Poe Power Output Per Port 52V Dc, 600Ma. Max. 30 Watts (Ieee 802.3At), 4-Pin 3.81M-Spacing Plug-In Terminal, V-48Vdc Wide Voltage Input, P1&P2 Dual Power Input, Reverse Protection , Item No 16 Supply, Installaton, Testing & Commissioning 6 U Network Rack Wall Mount 6U X 550 W X 450 D - Grey Color Front Glass Door (Tinted, Toughened) With Lock & Key, 2 Pairs Of 1 Mounting Rails With U-Marking Welded Side Walls With Metal Engraved 1U Cable Manager (1), Hardware Pkt Of 20 (1 Pkt) 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 0 Cfm /230V Ac (1 No , Item No 17 Supply, Installaton, Testing & Commissioning Cctv 75W Solar Power System 75W Highly Efficient Monocrystalline Photovoltaic Panel 24Ah Chargeable Lithium Ferro Phosphate Battery Smart Battery Management, Over-Temperature Protection Battery Short Circuit/Reverse Polarity Protection Low-Battery Protection , Item No 18 Supply, Installaton, Laying, Testing & Commissioning 6 Core Fiber Unitube Laying With Labor Charges Un Armoured, G.652D (Os2) Attenuation- ≤ 0.22 Db/Km (1550 Nm), Zero Dispersion Wavelength- 1300 - 1324 Nm, Tensile Strength 1000 N, Crush Resistance- 4000 N/100 Mm, Fiber Should Be With Uv Hdpe Sheath And Lszh Sheath. Peripheral Strength Member-0.6 ± 0.05 Mm (Steel Rods - 2Nos.) Including All Required Consumable Items, Mani, Tata Tar, Cabal Tie, Etc. , Item No 1 Supply, Installaton, Laying, Testing & Commissioning Cat6 Utp Cable Laying With Labour Charges L Solid Cable, Cat6 Utp, 4 Pair, 23Awg, Frpvc Cm, Grayback 305M. Performance Verified Up To 600 Mhz, Ul Listed And Etl Verified. Conductor - 23 Awg, Solid Bare Copper, Conductor Resistances- .38 Ω/100M Max. Capacitance Unbalance - Max. 330 Pf/100M, Dielectric Strength-1.0 Kvdc For 2 Seconds, Operating Voltage -72V,Including All Required Consumable Items, Mani, Tata Tar, Cabal Tie, Etc. , Item No 20 Supply, Installaton, Testing & Commissioning Led 43 Commercial Display. Backlight Type Direct Type 4K Uhdresolution 3,840 X 2,160 (4K Uhd) Refresh Rate 60 Hz Native , Item No 21 Supply, Installaton, Terrmination Of Conecters Cctv Connecters, Boots, Insulation, Pvc Boxes, And Required Accessories , Item No 22 Supply, Installaton, Fixing & Commissioning Ms Round Pole 2 In Diameter And 1.5Mm Thick With Properly Black/Silver /Gray Painted, Red Oxide To Prevent Rusting, Top Cover And Necessary Hole For Cat6 Cable - 12 Feet (To Be Properly Fix At Ground With Proper 2 Under The Ground, Making Pit And Covered With Concrete Cement Wherever Needed For Camera Mount , Item No 23 Supply, Installaton, Fixing & Commissioning Pole Mount Brackets With Clamping 1.5Mm Thick With Properly Black/Silver /Gray Painted, Red Oxide To Prevent Rusting, Top Cover And Necessary Hole For Cat6 Cable , Item No 24 Supply, Installaton, Fixing & Commissioning Outdoor Bullet Housings 8 A Combined Aluminum Alloy And Abs Housing Designed With Wall Mount L & U Type Bracket, Screes, Stands, Clamping Rings, Provides A Sealed Cable Gland Entry To Prevent Water Ingress. , Item No 25 Supply, Installaton, Laying, Testing & Commissioning 3 Core 1.5Sqmm Cable Laying With Labour Charges Electrical Cabal For Power Form Ele Pole And Near By Mcp Junction , Item No 26 Supply, Installaton, Testing & Commissioning Ps-1000Eco 1000Va (1Kva) Continuous (Pure Sine) Protection Against Discharge, Overcharge & Overload. , Item No 27 Supply, Installaton, Testing & Commissioning Ps-600Eco 600Va (0.6Kva) Continuous (Pure Sine) Protection Against Discharge, Overcharge & Overload. , Item No 28 Supply, Installaton, Testing & Commissioning Project Management Charges Project Execution, Training, Transport, Freight Charges, Civil Works, Other Charges & Documentation Charges , Item No 2 Tp-Link Cpe210 2.4Ghz 300Mbps Dbi Pharos Outdoor Cpe With 2X2 Dual-Polarized Directional Mimo Wifi Bushtar , Item No 30 Tp-Link Cpe 510 2.4Ghz 300Mbps Dbi Pharos Outdoor Cpe With 2X2 Dual-Polarized Directional Mimo Antenna Wifi Bushtar , Item No 36 Tp-Link Cpe 610 2.4Ghz 300Mbps Dbi Pharos Outdoor Cpe With 2X2 Dual-Polarized Directional Mimo Antenna Wifi Bushtar
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Maharashtra View Result →
10.
Defence #11482821 AOC
Tender for Lump Sum Price Worked Out By The Contractor For Buildings And StructuresAs Listed In Schedule A Part-I Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only.The Tenderer Is Required To Quote Their Rate Under Col 13 Against Item Of Works Catered Under This Schedule . , Construction Of Block Of Pump House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Block Of Fire Fighting Pump House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Block Of Power House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Ug Sump Of Capacity 125000 Ltrs Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Static Water Tank (Swt) Of Capacity 75000 Ltrs Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Over Head Tank Of Capcity 40000Ltrs With 21 Metre Staging Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Sch A Part-Ii To X: Note: These Schedules Are Pre-Priced By Mes And The Rate Indicated Against The Respective Schedule Under Col 6 Signifies This Fact Only. The Tenderer Is Required To Quote Their Lumpsum Amount Under Col 13 Against Item Of Works Catered Under These Schedule . , Lumpsum Price Inserted Under Col 13 By The Tenderer For Site Clearance / Site Development, Excavation & Earth Work For External Services, Etc.., As Listed In Schedule ‘A Part Ii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Ii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Internal Water Supply As Listed In Schedule ‘A Part Iii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Iii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Internal Electrification As Listed In Schedule ‘A Part Iv Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Iv , Lumpsum Price Inserted Under Col 13 By The Tenderer For Road / Path / Hard Standing As Listed In Schedule ‘A Part V Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part V , Lumpsum Price Inserted Under Col 13 By The Tenderer For Sewage Disposal As Listed In Schedule ‘A Part Vi Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Vi , Lumpsum Price Inserted Under Col 13 By The Tenderer For Area Drainage As Listed In Schedule ‘A Part Vii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Vii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Chain Link Fencing With Gate As Listed In Schedule ‘A Part Viii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Viii , Lumpsum Price Inserted Under Col 13 By The Tenderer For External Water Supply As Listed In Schedule ‘A Part Ix Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Ix , Lumpsum Price Inserted Under Col 13 By The Tenderer For Fire Fighting As Listed In Schedule ‘A Part X Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-X , Schedule A Part-Xi (Miscellaneous B/R And E/M Items) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only.The Tenderer Is Required To Quote Their Rate Under Col 13 Against Item Of Works Catered Under This Schedule . , Site Clearance / Site Development, Excavation & Earth Work For External Services, Etc.., Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And As Directed. , Internal Water Supply Supply And Fix C. P. Brass Fancy Type Pillar Cock 15 Mm Nominal Bore Of Approved Quality Conforming To Is Standards Complete All As Specified And As Directed. , Internal Electrification Supply And Layng Wiring For One 3 Pin Socket Outlet. 15 Amps, Independent, With Frls Pvc Insulated Copper Conductor Single Core Cables With 3 Runs Of 4 Sq. Mm Size Including Concealed Pvc Conduit And Conduit Accessories, Complete All As Specified And As Directed. Note : 3 Runs Of Cable And One Run Of Conduit Shall Be Measured As One Unit. , Supply And Fixing Led Lights Fitting 1X 20W, 220V, Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose, Complete All As Specified And As Directed. , Supply And Fixing Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection, Complete All As Specified And As Directed. , Supply And Fixing Led Flood Light 100 Watt 230 V Ac Outdoor Type With Thermal Management In Multiple Optics And Equipped With Ip66 Protection, With Impact And Corrosion Resistant Complete With Driver And Lamp, Complete All As Specified And As Directed. , Supply And Fix Exhaust Fan, Steel Body Ac Single Phase. 230V Of Size 300 Mm Sweep With, Blades, And Frame And Louvers Complete All As Specified And As Directed. , Supply And Fixing Air Circulator Heavy Duty (Wall Mounting) Fan 450 Mm Sweep, 230V, Ac, 50 Hz Complete All As Specified And As Directed. , Sewage Disposal Material And Labour For Soakage Wells Excavation, In Any Type Of Soil, Foundation In Plain Cement Concrete 1:3:6, Walls Of Honey Combed Masonry With Top Ring Of M25 Concrete Including Intercepting Chamber And Screen Chamber Made Of Brick Masonry In Cm, Reinforced Cement Concrete Cover Slab In M25/ Steel Fibre Reinforced Concrete Cover, Inter Connecting Pipes Of Rcc/Dwc Complete Filled With Brick Bats Of Size 1.2X3.0M Effective Depth Complete All As Specified And As Directed. , Material And Labour For Lldpe Septic Tank For 05 Users Designed To Carry Sewage And Sullage Water, Including Excavation In Any Type Of Soil, Plain Cement Concrete 1:4:8 Below Foundation, Vent Shaft, Connection Etc, Complete All As Specified And As Directed. , Area Drainage Material And Labour For Extra Over Stone Walling For Hammer Dressing To Face Stones And Dressing Of Face Beds And Joints As Specified Of Face Beds And Joints As Specified Of Random Rubble Walling Uncoursed Or Brought Upto Course With 40Mm Maximum Depression On Face From Straight Edge Held Against The Dressed Surface Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Surface Channels And Drains Etc, Complete All As Specified And As Directed. , Material And Labour For Extra For Forming Fair Finished Drain Or Channel 60 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms, Moulds, Mitred/Stopped Ends Etc, Complete All As Specified And As Directed. Note: Inner Girth Olny Measured. , External Water Supply Material And Labour For Constructing Masonry Chamber 120X120x100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5, Complete All As Specified And As Directed. , Material And Labour For Constructing Masonry Chamber 90X90x100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep (Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ), Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5, Complete All As Specified And As Directed. , Supply And Fix 100Mm Dia Bore Ci Sluice Valve Flanged End Of Class Pn -1.6 With Brass Spindle And Hand Wheel Including Necessary Gasket, Nuts And Bolts, Washer Etc., Complete All As Specified And As Directed. , Supply And Fix Ci (Cast Iron) Foot Valve Conforming To Is 4038, 100 Mm (4) Dia Complete With Rubber Gasket, Gi Bolts, Nuts, Washers Etc Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 80 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 50 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 25 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fix Pressure Gauge 4Dial 0-14 Kgs Rating Complete All As Specified And As Directed. , Material And Labour For Xlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade, Cross-Sectional Area 16 Sq. Mm, 3 Core, Isi Marked, Conforming To Is: 7098 (Part 1)-1988 Having Stranded Aluminium Compact Shaped Conductor As Per Cl. 2, Is: 8130-1984, Pvc Inner Sheath, Single Armouring Of Galvanized Steel Strip / Wire And Pvc Type St-2 Outer Sheath Conforming To Is: 5831-1984, Including Termination Complete As Specified And As Directed. , Supply, Installation, Testing And Commissioning Of Monoblock Pump Set Suitable For 415 V, 3 Phase System Having Capacity 10 Hp/ 7.5 Kw, 24-39 Metre Head, 3000 Rpm, Discharge Range 1150-550 Lpm, Suction And Delivery Pipe Size 80 X 65 Mm Dia Including Foundation, Base Frame Etc. Complete All As Specified And As Directed. , Supply, Laying & Testing Pvc Insulated, Pvc Sheathed Cable Galvanized Steel Strip Or Wire Armoured, Electric Control Cables (Heavy Duty) With Stranded Copper Conductor Of Size 2.5 Sq Mm, 3 Core, 1100 Volts Grade, Extruded Pvc Type St2 Sheathed, Conforming To Is 7098 (Part 1) 1988 Complete All As Specified And As Directed. , Supply And Fix Dol Control Panel, 3 Phase, Voltage Range 275-475Volts, 5 Hp/3.75 Kw, Relay Range 6-10A Complete All As Specified And As Directed. , Supply, Installation, Testing And Commissioning Of Monoblock Pump Set Suitable For 415 V, 3 Phase System Having Capacity 5 Hp/ 3.5 Kw, 24-39 Metre Head, 3000 Rpm, Discharge Range 900 Lpm, Suction And Delivery Pipe Size 50 And 40 Mm Dia Including Foundation, Base Frame Etc. Complete All As Specified And As Directed. , Supply, Install, Testing And Commissioning Of Weather Proof Lt Panel Indoor Type Made Out Of Crca Sheet 2.0 Mm Thick, Cubical Type Factory Made With Front Opening Type Free Standing, Suitable For 415 Volts, 3 Phase, 4 Wire, 50 Hz, Ac Supply Having 4 Nos Aluminium Bus Bars Of 200 Amps Capacity Duly Insulated With Heat Shrinkable Colour Coated Sleeve Complete, Painted With Powder Coated With Locking Arrangement, Mounted On Ms Angle Base Frame Of Size 50 X 50 X 6Mm Including Grouting In Pcc. The Lt Panel Povided With The Following Accessories Complete All As Specified And As Directed :- (A) Mccb 415 Volts 4 Pole 125 Amps, 18Ka - 01 (As Incomer). (B) Digital Led Multi Function Meter With Inbuilt Selector Switches, Class 0.5 Including Cts - 01 No. (C) Phase Indicated Lamp Led Type With Back Up Fuse For 3 Phase - 02 Set (Ryb). (D) Mccb 415 Volt 4 Pole 63 Amps 16 Ka - 03 Nos (As Out Going). (E) Mcb Spn 40 Amps, 10 Ka, C Curve - 02 Nos, (F) Star-Delta Starter 10 Hp/ 7.5 Kw, 20-32A, 275-475 Voltage - 02 Nos , Supply, Install, Testing And Commissioning Of Weather Proof Lt Panel Indoor Type Made Out Of Crca Sheet 2.0 Mm Thick, Cubical Type Factory Made With Front Opening Type Free Standing, Suitable For 415 Volts, 3 Phase, 4 Wire, 50 Hz, Ac Supply Having 4 Nos Aluminium Bus Bars Of 200 Amps Capacity Duly Insulated With Heat Shrinkable Colour Coated Sleeve Complete, Painted With Powder Coated With Locking Arrangement, Mounted On Ms Angle Base Frame Of Size 50 X 50 X 6Mm Including Grouting In Pcc. The Lt Panel Povided With The Following Accessories Complete All As Specified And As Directed :- (A) Mccb 415 Volts 4 Pole 125 Amps, 18Ka - 01 (As Incomer). (B) Digital Led Multi Function Meter With Inbuilt Selector Switches, Class 0.5 Including Cts - 01 No. (C) Phase Indicated Lamp Led Type With Back Up Fuse For 3 Phase - 02 Set (Ryb). (D) Mccb 415 Volt 4 Pole 63 Amps 16 Ka - 03 Nos (As Out Going). (E) Mcb Spn 40 Amps, 10 Ka, C Curve - 02 Nos, (F) Star-Delta Starter 10 Hp/ 7.5 Kw, 20-32A, 275-475 Voltage - 02 Nos
Contract Date: Jul 01, 2026 Contract Value : 2.63 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
11.
Public Administrative Department #11482340 AOC
Tender For Provision Of Lighting Arrangement With Led Street Lights In Ward No -236 Kardampuri Under Shahdara (North) Zone.; 1 LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LEDfixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driverefficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III asper the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall beas approved by Engineer-in-Charge as per requirement. (Thermalmanagemheat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).72 watt 2 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (a)Upto 35 sq. mm 3 P/FHot press sheet mouldedcompound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof polebox of innerdimension 200x160x98mm (NS) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole MCB & 63 Amp. Doublepole isolator (MCB/Isolator excluded) withneutral link duly shorting on DIN Channel with2 Nos of MS clamps with SS back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 4 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 1.5 sq. mm 5 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 6 Supply of XLPE insulated PVC Sheathed Al conductor armoured cable 1.1 KV grade conforming to IS-7098 of following size: (a)2x6 Sqmm 7 Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm 8 Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd 9 Providing and fixing of Stainless steel name plate of size 6×8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required 10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10KA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a)Single pole
Contract Date: Jun 30, 2026 Contract Value : 4.10 Lakh
Local Bodies No of Bidders 2
12.
Public Administrative Department #11480366 Price Bid
Tender for Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminium Body (System Lumen Efficacy 135 Lm/Watt). Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching)5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required Withminimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixturesas Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Supply And Fixing Of 32Mm Dia X 1 Meter Long G.I. Pipe (Medium Class) Bracket For Mounting Of Fluorescent/Hpmv/Hpsv Street Light Fitting On Pole Including Bending The Pipe To The Required Shape , 2 Nos 25Mm X 6Mm Flat Iron Clamps With Nuts, Bolts And Washer , Painting The Flat Iron With Primer And Finish Paint Etc. As Reqd , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*4 Sqmm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
13.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Jul 02, 2026 Contract Value : 2.83 Lakh
Government Departments No of Bidders 1
Andhra Pradesh View Result →
20.
Drinking Water Supply and Sanitation #11440764 Technical Bid
It Component And Other Works Of Truck Terminal At Panjapur; 1 SECTION 1.00 ELECTRICAL PANAL 2 MV panel - 1 Incomer-630A4PMCCBOutgoing-200ATPNMCCB-2 Nos,160 A TPN MCCB-1 Nos, 100 A TPN MCCB-2 Nos,40A TPN MCCB -3 Nos, ALUMINUM BUS, POWDER COATED ENCLOSER, R,Y, B INDICATION, MFM, (MCCB-L&T & ABB, Accessories – Reputed Make) 3 MV panel - 2 Incomer-630A4PMCCBOutgoing-400ATPNMCCB-1 Nos,160A TPN MCCB-3 Nos,,100A TPN MCCB-2 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER , R,Y,B INDICATION, MFM, (MCCB-L&T & ABB, Accessories –Reputed Make) 4 ACCP-1,6STAGEAPFCPANEL75KVAR,ALUMINUM BUS, POWDER COATED REPUTED BRAND (MCCB, MCB,POWER CONTACTOR - L&T & ABB, Capacitor and APFC relay–Reputed Make) 5 Commercial block –GROUND FLOOR Incomer: 200A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 24nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-4nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 6 Commercial block -1ST FLOOR Incomer: 125A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 10nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-6nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 7 UTILITYPANELCommercialblockIncomer:160A4P MCCB -1 nos Outgoing:100A TPN MCCB-2 Nos, 40A TPN MCB -2 Nos, 40A DP MCB -1 Nos, ALUMINUM BUS,POWDERCOATEDENCLOSER(MCCB&,MCB- L&T & ABB, Accessories – Reputed Make) 8 UTILITY PANEL – DORMITORY BLOCK Incomer: 400A 4 PMCCB-1nosOutgoing:160ATPNMCCB-4Nos,100A TPNMCCB-5Nos,63ATPNMCCB-3Nos,ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 9 EXTERNALLIGHTINGPANEL-1Incomer:160ATPN MCCB -1 nos Outgoing:63A TPN MCB-5 Nos,32A DP MCB -3 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 10 EXTERNALLIGHTINGPANEL-2Incomer:160ATPN MCCB-1nosOutgoing:63ATPNMCB-3Nos,32ADP MCB-2Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 11 SUB LT PANEL DORMITORY BLOCK Incomer: 160A 4P MCCB -1 nos Outgoing:40A TPN MCB-5 Nos,40A DP MCB -5 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 12 LIFTPANELIncomer:100ATPNMCCB-1nos Outgoing:100A TPN MCCB-1 Nos,6A SP MCB -3 Nos,16A SPMCB-3Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 13 HV METRING PANEL 630A 11KV OUTDOOR TYPE VCB SP PANEL WITH CT, PT FOR MEASUREMENT AND PROTECTION 14 11KV VCB 3 phase PANEL LINE UP OUTDOOR 1 INCOME, 2 OUTGOING 15 LTISOLATOR630A4PISOLATORPANELOUTDOOR TYPE 16 Supply, errection, testing and commissioning of 11 KV, 25 KA,630A,HTOutdoorThreePanelRingMainGear complete 17 Supply, errection, testing and commissioning of Fire FightingElectricalControlPanelof15HP,415V,50Hz RatingWallMountedTypefabricatedusingCRCAsheet, hinged lockable door, dust and vermin proof with following provisions:Supply, errection, testing and commissioning of Fire Fighting ElectricalControlPanelof15HP,415V,50HzRating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R, Y, B Phase Indication Lamp, Volt Meter (0 - 500 V), Ammeter (0 - 50 A), Volt Meter Selector Switch- 1 set c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set d. Single Phase Preventer - 1 No. e. Indication Lamp for Motor ON / OFF / TRIP - 1 set f. AUTO / MANUAL Selector Switch, ON / OFF Push Button - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover The above panel mounted on wall using anchor fasteners 18 SECTION 2.00 EARTHEN ROD 19 5 Mtr depth for each earth pit which includes 40mm dia GI Pipe,25X5mmCopperStrips,andcopperearthplateof size 125mm x 50mm x 6mm 20 SECTION 3.00 PUDDLE FLANGE 21 Supply, delivery and fixing following puddle flange including cost of materials and following charges etc. complete. As directed by the departmental officers. 22 50NB x 600mm Pipe L one side Flange & Plate GI 23 65NB x 600mm Pipe L one side Flange & Plate GI 24 80NB x 600mm Pipe L one side Flange & Plate GI 25 100NB x 600mm Pipe L one side Flange & Plate GI 26 200NB x 600mm Pipe L one side Flange & Plate GI 27 80NB x 600mm Pipe L one side Flange, One side thread & Plate GI 28 100NB x 600mm Pipe L one side Flange, One side thread & Plate GI 29 150NB x 600mm Pipe L one side Flange, One side thread & Plate GI 30 300NB x 600mm Pipe L one side Flange, One side thread & Plate GI 31 SECTION 4.00 LANDSCAPING 32 SUPPLY AND FIXING THE MEXICAN CARPET / KORIEN LAWN : New Soil preparation like root regulators, vermin, DAP compost, pest control, weeds control, water irrigation and laid with Mexican carpet lawn. 33 PlantingofDurantanewgoldPlantornamentalfoliage shrub variety of height 30-45cm in polythene bagof size 6x7inchincludingloadingandunloadingcharges, transportation,stackingofsaplingsatsite,earthwork excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 34 supply and fixing ofDuranda Gold (Large) including All charge etc compleded 35 Supplying and Planting of Hibiscus tilliaceus tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the deparment incharge 36 supply and fixing of Exora including transport including all charge etc 37 supply and fixing of Bycuss Tree Plantincluding transport including all charge etc 38 supply and fixing of Royal Parms including transport including all charge etc 39 supply and fixing of Aricka Parms including transport including all charge etc 40 supply and fixing of Mosanda including transport including all charge etc 41 Planting of Asparagus myuri ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch includingloadingandunloadingcharges,transportation, stacking ofsaplings atsite, earthwork excavationof required size,planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 42 supply and fixing of Adineeyam including transport charge etc complete 43 supply and fixing of Gulmahar Tree Plant including transport charge etc complete 44 PlantingofTecomacapensisfoliageshrubvarietyof height 30-45 cm in polythene bag of size 6x7 inch including loadingandunloadingcharges,transportation,stackingof saplingsatsite,earthworkexcavationofrequiredsize, plantingofsapling,refillingofexcavatedearthetcas directed by the site in-charge. 45 PlantingofCycusrevoluta21-30 Leavesornamental foliageSpecimenplantvarietyofheight105-120cmin polythenebagofsize16x16inchincludingloadingand unloadingcharges,transportation,stackingofsaplingsat site,earthworkexcavationofrequiredsize,plantingof sapling, refilling of excavated earth etcasdirectedby the site incharge. 46 supply and fixing of Neem Cake including transport charge etc complete 47 Supply of Vermicompost in powder form, devoid of impuritiesandothermaterials,nutrientdenseandwhich supports plant growth including cost of transportation 48 FOUNTAINSUPPLYANDFIXINGFOUNTAINBOTTOM WITH BASE AS PER DESIGN INCLUDING ALL LABOUR AND MATERIAL ETC. 49 SECTION : 5 IT COMPANANT 50 INDOOR & OUTDOOR SURVEILLANCE 51 Supplyandfixingof5.0MPIPOutdoorCamerawith necessary fitting including labour cost,etc complete 52 Supply and fixing of 4.0MP IP PTZ CAMERA with necessary fitting including labour cost,etc complete 53 Supply and fixing of ANPR CAMERA with necessary fitting including labour cost,etc complete.Similar to dahua technologyITC431- RWIF-IRLS 4 mp outdoor network link line plate bullet Camera. 54 Supply and fixing of NVR 32 CH with necessary fitting including labour cost,etc complete 55 Supply and fixing of NVR 8CHwith necessary fitting including labour cost,etc complete 56 Supply and fixing of 8TB HARD DISK complete 57 Supply and fixing 8 PORT POE SWITCH complete 58 Supply and fixing 24 PORT POE SWITCH complete 59 Supply and fixing CAT6 ARMOURD CABLE complete 60 Supply and fixing OFC CABLE 12CORE Armourd complete 61 Supply and fixing OFC CABLE 6 CORE Armourd complete 62 Supply and fixing Outdoor Rack complete 63 Supply and fixing of 3 Core 4 Sqmm Armourd Cable complete 64 Supply delivery and erection for following Networking Accessories, DB, Rack indoor , LIU, Media Converter, SFP, Pigtail, Cable Manager, Connectors etc , complete as direected by the departmental officer 65 Network Accessories 66 16 Port Gigabit Unmanaged Network Switch with 2 SFP (Including Module & Pigtail) 67 Fiber Patch Panel 12 Port 68 LC/LC Single Mode / Multi mode Patch Cord 2mtr 69 Pigtails Single Mode / multi mode Cord LC type for Fiber Patch Panel 70 CAT 6A UTP Armoured Cable 71 CAT 6A UTP 2 mtr Patch Cord 72 CAT 6A Modular 24 Port Patch Panel fully loaded 73 Fiber Single Mode Cables 12 Core Armoured 74 Supply delivery and erection for following NETWORK VIDEO RECORDER FOR CCTV HIGHER END etc , complete as direected by the departmental officer 75 4 Channel - 1 SATA 76 8 Channel - 1 SATA (1 No. Hard Disk) 77 16 Channel - 2 SATA (2 Nos. Hard Disk) 78 32 Channel - 2 SATA (2 Nos. Hard Disk) 79 Supply delivery and erection for following LAN NETWORK SWITCHES - HIGHER ENDFully Managed 10 / 100 / 1000 Layer-3 with 10G Uplink - Higher End 80 24 Port 81 24 Port with Fibre Port 82 48 Port 83 Supply delivery and erection for following MEDIA CONVERTER FOR OPTICAL FIBRE CABLE HIGHER END complete as direected by the departmental officer 84 Single Mode 85 Multi Mode 86 Supply delivery and erection for following I/O SOCKET - HIGHER END complete as direected by the departmental officer 87 RJ-45 88 RJ-11 89 CAT 6 PVC Module Box 90 Face Plate Single Socket RJ-45 91 Face Plate Dual Socket RJ-45 92 Face Plate Quad Socket RJ-45 93 Supply delivery and erection for following HARD DISK FOR NVR - HIGHER END complete as direected by the departmental officer 94 2 TB 95 4 TB 96 6 TB 97 8 TB 98 Supply delivery and erection for following RACK WITH ACCESSORIES - HIGHER END complete as direected by the departmental officer 99 2U Rack 100 4U Rack 101 6U Rack 102 9U Rack 103 12U Rack 104 36U Rack 105 42U Rack 106 Fan extra for the above rack 107 Supply delivery and erection for following Cable Management Box with Cover complete as direected by the departmental officer 108 CABLE MANAGEMENT SYSTEM 109 50mm x 80mm Cable box with cover 110 150mm x 105mm Cable box with cover 111 b. Divider 112 c. Cover Joint 113 d. End Cap 114 e. Joint for Top Part 115 f. Joint for Bottom Part 116 Supply and fixing of Pole 6 Mtrs with footing includng cost of excavation.Pcc,etc complete 117 Supply and fixing of Pole 8 Mtrs with footing includng cost of excavation.Pcc,etc complete 118 Supply and fixing of 15KVA Online UPSnecessary fitting including labour cost,etc complete 119 SupplyandFixingofIPSANwithHDDforSecodary Recording 1 day 120 SupplyandFixingofVMS-IncludingEnterance&Exit ANPR, Surveillance, Parking availability, Parking Mangement, Duration and Payment Calculation 121 Supply and Fixing of VMS Server including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 122 Supply and Fixing of VMS Workstation for Operation including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 123 INTERACTIVE TOUCH PROFESIONAL DISPLAY, ACTIVE LED VIDEO WALL AND VIDEO CONFERENCING SYSTEM 124 65”, 4K, Andriod-13, INTERACTIVE TOUCH Professional Display with USB-C, HDMI-In & Out. 125 Professional 4K, All-In-One VC Camera bar, extension TABLE MIC, AI face tracking and auto zooming 126 4K, 12x Optical,5x Digital, Total 60x Zoom, Professional PTZ VC Camera:-Built-In Microphone Array, Speaker Tracking. 127 Full HD, 20x Optical, Professional PTZ VC Camera. 128 Outdoor Active LED Video wall with Pixel Pitch of 4mm, MS Cabinets, Receiving Cards and Control Processor. 129 Supply and Fixing of following UHF WIRELESS CONFERENCE MIKE SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 130 UHF Wireless WAP access point ( Supports both Audio system and Camera system ) 131 Supply and Fixing of following OUTDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 132 Supply and fixing of IP Speaker Outdoor 133 Supply and fixing IP Server , Broad Cast 134 Supply and fixing IP Phone 135 Supply and Fixing of following OUTDOOR PARKING SOLUTION including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 136 Supply and fixing of AI Camera for Parking Availability 137 Supply and fixing of LED Display for Vehicle Availability 138 Supply and fixing of 55 4K UHD for Parking availability with connecting Cable 139 Supply and fixing of Work Station at Security Room 140 Supply and Fixing of following INDOOR SURVEILLANCE including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 141 Supply and fixing of CAT6 INDOOR CABLE including labour cost 142 Supply and fixing of 25.4mm pipe for cable laying including labour cost 143 Supplyandfixingof 3Core4SqmmArmourdCable includinglabour cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 144 Supply and Fixing of following IINDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 145 Supply and fixing of 15W Speaker Indoor 146 Supply and fixing of 120W Mixer Amplifier 147 Supply and fixing of240W Power Amplifier 148 Supply and fixing ofCordless Mic UHF 149 Supply and fixing of2 Core 1.5 Sqmm with neatly finishing 150 Supply and fixing of 25.4mm pipe for cable laying including labour cost 151 Supply and Fixing of followingAnalog to IP Module including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 152 Indoor system 153 Outdoor system 154 INDOOR CONTROL ROOM 155 Supplyandinstallationof2TonA/CwithSteblizer& Accessoriesincludingmaterialconveyance,labour complete as per engineer incharge 156 GST amount as applicable (18 %)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
21.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
24.
Defence #11422724 Technical Bid
Tender For Repair And Replacement Of Perimeter And Road Light At Ofd; 1 electrical works 2 Excavation in trenches, n exc 1.5m wide and n exc 1.5m depth, for foundation etc. n exc 10sq.m. on plan and n exc 1.5m in depth and getting out. 3 Soft/loose soil 4 Hard/dense soil 5 Returning filling in including spreading leveling watering and well ramming in layers not exc 25cm in soft and hard soil. 6 M & L for Sand filling under the floors or in foundations including watering and consolidation. 7 M & L for Continuous brick edging; with width equal to the width of the brick; of whole sub-class B bricks, laid dry on end vertically with burnt clay bricks of sub class B.. 8 M & L for Cement concrete in foundations filling and mass-concrete type B2 1:2:4(40mm graded agg.) 9 M & L Compression/crimping gland type sleeve joints for jointing conductors / jumper/lug connections including treatment with conducting jelly Overall dia of conductor Above 10mm dia of conductor wire overall 10 Supply and laying of PVC underground cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core. 11 Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular Size of aluminium conductor in 4 mm2 (sq mm) Stranded conductor. 12 Supply and fixing of SHEET METAL STREET LIGHT BUS BAR CHAMBER WITH DOOR & 2 STRIPS, THICKNESS OF SHEET- 14SWG, 450mmx300mm, Three phase alluminium bus bar 2x25mmx3mm on 1100 volts grade insulators & seperately fixed with DP MCB 5 Amps asper drawing arrangement, including proper size of holes to connect cable, supply of M S clamp, nuts & bolts to fixed on pole. 13 Supply and fixing of SHEET METAL STREET LIGHT BUS BAR CHAMBER WITH DOOR & 4 STRIPS, Thickness of sheet- 14SWG, 600mmx350mm, Three phase alluminium bus bar 4x(25mmx3mm) on 1100 volts grade insulators & seperately fixed with DP MCB 5 Amps asper drawing arrangement, including proper size of holes to connect cable, supply of M S clamp, nuts & bolts to fixed on pole.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Uttarakhand View Result →
25.
Public Administrative Department #11417448 Price Bid
Tender for Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*4 Sqmm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All 51 Delhi Schedule Of Rates (E&M)-2025 Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Supply And Fixing Of 32Mm Dia X 1 Meter Long G.I. Pipe (Medium Class) Bracket For Mounting Of Fluorescent/Hpmv /Hpsv Street Light Fitting On Pole Including Bending The Pipe To The Required Shape , 2 Nos 25Mm X 6Mm Flat Iron Clamps With Nuts, Bolts And Washer , Painting The Flat Iron With Primer And Finish Paint Etc. As Reqd.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
26.
Public Administrative Department #11417447 Price Bid
Tender for Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*4 Sqmm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All 51 Delhi Schedule Of Rates (E&M)-2025 Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Supply And Fixing Of 32Mm Dia X 1 Meter Long G.I. Pipe (Medium Class) Bracket For Mounting Of Fluorescent/Hpmv /Hpsv Street Light Fitting On Pole Including Bending The Pipe To The Required Shape , 2 Nos 25Mm X 6Mm Flat Iron Clamps With Nuts, Bolts And Washer , Painting The Flat Iron With Primer And Finish Paint Etc. As Reqd.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
27.
Public Administrative Department #11417446 Price Bid
Tender for Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*4 Sqmm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All 51 Delhi Schedule Of Rates (E&M)-2025 Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Supply And Fixing Of 32Mm Dia X 1 Meter Long G.I. Pipe (Medium Class) Bracket For Mounting Of Fluorescent/Hpmv /Hpsv Street Light Fitting On Pole Including Bending The Pipe To The Required Shape , 2 Nos 25Mm X 6Mm Flat Iron Clamps With Nuts, Bolts And Washer , Painting The Flat Iron With Primer And Finish Paint Etc. As Reqd.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
28.
Public Administrative Department #11417374 Price Bid
Tender for Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*4 Sqmm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Led Street Light Fixture, Powder Coated Pressure Die Cast Aluminum Body (System Lumen Efficacy 135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Street Light Led Fixture, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr-15, Lenses For Beam Angle As Per Iesna Type I/Ii/Iii As Per The Width Of The Road And The Project Requirement., Suitable To Fit In Up To 65Mm Dia Pipe, Life Time (Led,Driver & Electrical Circuitary) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard Complete In All 51 Delhi Schedule Of Rates (E&M)-2025 Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 45 Watt , Supply And Fixing Of 32Mm Dia X 1 Meter Long G.I. Pipe (Medium Class) Bracket For Mounting Of Fluorescent/Hpmv /Hpsv Street Light Fitting On Pole Including Bending The Pipe To The Required Shape , 2 Nos 25Mm X 6Mm Flat Iron Clamps With Nuts, Bolts And Washer , Painting The Flat Iron With Primer And Finish Paint Etc. As Reqd.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
29.
Drinking Water Supply and Sanitation #11415826 Technical Bid
Supply And Fitting Fixing Of Main Switch, Pipe, Fittings And Other Additional Electro-Mechanical Work At Ohr Site Of Puncha Water Supply Scheme Under Purulia Mechanical Division Phe Dte.- 1 Supply and delivery of 200 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC60947-1&3). (Make: Approved Vendor list of PHED.) 2 Supply and delivery of 200 Amp/415V. Kit kat rewireable (Porcelain fuse carrier & base) as per IS: 2086.(Make: Approved Vendor list of PHED.) 3 Supply and delivery of 1.1KV grade 70 sq.mm 3.5 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part-I) 2011, with upto date amendments.(Make: Approved Vendor list of PHED.) 4 Supply and delivery of100 mm dia. PN 1.0. rating Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB. 5 Supply and delivery of 100 mm dia. MS E.R.W. as per IS: 1239 (part I & II), Thickness 5.4 mm 6 Supply and delivery of 200 mm dia. MS E.R.W. as per IS: 1239 (part I & II), Thickness 7.1 mm 7 Supply and delivery of 150 mm dia. MS ERW B/W ElbowC class (Heavy duty) 8 Supply and delivery of 150 mm x 100 mm MS ERW Reducer. 9 Supply and delivery of 200 mm x 100 mm MS ERW Reducer. 10 Supply and delivery of 100 mm dia. 10.5 kg/cm² MS Slipon flange (ASA 150#B16.5). 11 Supply and delivery of 150 mm dia. D.I. flange socket Tailpiece. 12 Supply, delivery at site and storage of bourdon type Gauges with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line withThree Way Cock etc.Pressure Gauge ( 0 - 10 kg / sq.cm ) 13 Compound Gauge ( + 1KSCG to -1KSCG ) 14 MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. PN 1.0 ratings. (Make: Approved make of PHED)i) DN 150 mm 15 DN 100 mm 16 Wiring in 1.1 KV grade single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(a) 2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm) 17 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 18 Installation above supplied item no. 1.00 to 13.02 and making pipe line with supply and fixing of all necessary nut, bolt, flange, etc. including labour charges of cutting welding by machinery tools and hire charges of Generator, welding set, fuel, lubricants etc. with drawing of power cable from WBSEDCL meter to Main switch to MCC panel through wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting and fixing main switch on MS angle frame with double earthing arrangement with S & F necy cable gland, lugs, nut, bolt etc. as per direction of EIC. 19 Add GST @ 18% 20 Add CESS @ 1%
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
30.
Housing Urban and Rular Development #11415087 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
31.
Railways #11414244 AOC
Supply Of Supply, Testing & Commissioning Of 1 H.Psupply, Testing & Commissioning Of 1 H.P,Supply & Testing Of 4 Core, 35 Sq Mm Lt Power Al Cable, Stranded, Xlpe Insulated, Cores Lai D Up, Pvc Tape Innersheathed, Armoured, Extruded Pvc Type St2 Sheathed, 650/1100 V Grade. Make-Kei/ Mescab/Havells/Polycab [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] , Supply & Testing Of 4 Core, 120 Sq Mm Lt Power Al Cable, Stranded, Xlpe Insulated, Cores Lai D Up, Pvc Type Innersheathed, Armoured, Extruded Pvc Type St2 Sheathed, 650/1100 V Grade As Per Is 70 98 (Part-1) 1988 Or Latest As Per Instruction Of Engineer Incharge At Site. [ Warranty Period: 12 Months Af Ter The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] , Supply & Testing Of 4 Core, 35 Sq Mm, Lt Power Al Cable, Xlpe Insulated, Cores Laid Up, Pvc I Nnersheathed, Armoured Aluminium Stranded Conductor, Extruded Pvc Type St2 Outer Sheathed, 650/1100 V Grade As Per Is 7098 (Part 1) 1988 Or Latest. [ Warranty Period: 12 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] , Supply & Testing Of 4 Core, 25 Sq Mm Lt Power Al Cable, Stranded, Xlpe Insulated, Cores Laid Up Pvc Tape Innersheathed, Armoured, Extruded Pvc Type St2 Sheathed, 650/1100 V Grade. [ Warranty P Eriod: 12 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] , Supply, Testing & Commissioning Of 1 Hp, 0.75 Kw Self Priming Monoblock Pump Motor Set Co Mplete, Suitable For 220 Volt, 50 Hz, 1 Phase Supply. [ Warranty Period: 12 Months After The Date Of Deliv Ery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] , Supply, Testing & Installation Of 120 Ah, 12 V Smf Vrla Battery As Per Instruction Of Enginee R Incharge At Site. ( Utilised In Dg Set, Inverter/Ups) [ Warranty Period: 12 Months After The Date Of Delive Ry ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] => Limited
Contract Date: Jun 30, 2026 Contract Value : 49.27 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 3.99 Lakh
Local Bodies No of Bidders 1
Contract Date: Ref. Documents Contract Value : 1.09 Lakh
Government Departments No of Bidders 1
35.
Defence #11388434 Technical Bid
Tender for Procurement Of Electrical Spare Items For Electrical Estate, Bel Bangalore , Procurement Of Electrical Spare Items , Switch Sp,5Amps,Flush Mounting (Bel Part No.990110006826) , Universal Socket 5A (Bel Part No.990110005759) , Capacitor 2.25Mfd (Bel Part No. 990110511808) , Open Dp Switch 32A (Bel Part No.990010298004) , Electronic Regulator (Bel Part No.990072007852) , Heating Element For Geyser 2 Kw (Bel Part No.990174051270) , Immersion Heating Element (Bel Part No.990110134672) , Water Heater Element Round Type (Bel Part No.990010298974) , Water Heater Element Oveltype (Bel Part No.990010298295) , Thermostat (Bel Part No.990010074031) , Rigid Pvc Conduit 1 (Bel Part No.990010000666) , Pvc Pipe-3/4(19Mm)Dia (Bel Part No.990072023178) , Gangway Box 1Way (Bel Part No.990110027972) , Exhaust Fan 250Mm Plastic Body (Bel Part No.990010265412) , Insulation Tape (Different Colours) (Bel Part No.995010234008) , Bioline Gel(Petrolium Gelly) (Bel Part No.990210001351) , Hylum Sheet 2400Mmx1200mmx3mm-White (Bel Part No.990010000903) , Pvc Casing & Caping 20Mm White (Bel Part No.990110020891) , Pvc Casing Caping 1 (Bel Part No.990010000434) , Piercng Connectrs,16-95Sqmm(Abc) (Bel Part No.990010000693) , Led Bulb 7W Warm Light (Bel Part No.990010204787) , 50W Led Flood Light Luminaire (Bel Part No.990010002082) , 200W Led Flood Light (Bel Part No.990010213032) , Street Light Led Fitting, 150W (Bel Part No.990010000994) , Led Post Top Light Fitting 40W (Bel Part No.990010224284) , 4 Sq Mm, Pvc, Multistrand, Cu Wire (Bel Part No.990010000736) , 2.5 Sqmm, Pvc, Multistrand Cu Wire (Bel Part No.990010000735) , 1.5Sqmm, Pvc Multistrand Copper Wire (Bel Part No.990010000271) , Twin Flat 1Sqmm 2Core Cable (Bel Part No.990010298101) , 2.5 Sq-Mm - 3Core Cu- Cable (Bel Part No.990010000125) , Cable Al Armoured 4Core,10Sqmm (Bel Part No.990110033210) , Cable Aluminium,4 Core,16Sqmm (Bel Part No.990110033113) , Al.Flat Cable 2.5Sqmm,Twin Cor (Bel Part No.990110077636) , Al 2X16sqmm Abc 2Core Cable (Bel Part No.990010297907) , Heat Shrinkable Cable Jointing Straight (Bel Part No.990074009447) , Cable Jointing Kit For 25 Sqm (Bel Part No.990074008865) , 1.1Kv Heat Shrk St.Jt-Kit-3.5Gx50sqmm (Bel Part No.990010190722) , 1.1Kv Heat Shrk St.Jt-Kit-3.5Gx95sqmm (Bel Part No.990010190916) , 10A - Switch (Make-Anchor Roma). (Bel Part No.990072037534) , Metal Cutting Blades (Bel Part No.995010827066) , Hole Saw Cutter 18Mm (Bel Part No.990310305230) , Hole Saw Cutter 25Mm (Bel Part No. 990310305327) , Hole Saw Cutter 30Mm Dia (Bel Part No.990010197124) , Hole Saw Cutter 50Mm Dia (Bel Part No.990010197221) , High Speed Steel Drill Bit Set (Bel Part No.990210763345) , Flat Spaner Set (Bel Part No.995010290462) , Rong Spaner Set (Bel Part No.995010290559) , Smc Junction Box 240X130x110mm2 (Bel Part No.990010002046) , Smc Meter Box (Bel Part No.990410000115) , Smc Meter Box (Bel Part No.990010000290) , Air Blower (Bel Part No.990210742490) , Hot Air Blower (Bel Part No.990010272202)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
36.
Public Administrative Department #11387234 AOC
Tender for Nagar Panchayat Seemaantargat Prakash Vyavastha Hetu Do High Mast Lagvane Ka Karya. , Supply And Fixing Of 12.5 Mtr. High Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Out Dip, Heaving Pole Sheet Thickness 4Mm.Top Dia Minimum 150Mm Bottom Dia Minimum 310 Mm, Base Plate 25 Mm Thick, Suitable For Wind Velocity As Per Is 875 Part 3 & Having No Circmuferential Weld, With Accessories For High Muas Such As Head Frame Sutibale For 6 To 12 Luminaries & Its Control Gear Boxes 0.75 Hp Powe Tool Moter, 3 Point Suspension Sytstem With Steel Wire Rope 6Mm Dia, Double Dum Wich, Including Making Suitable Foundation Bolts, Nuts, Washers, Anchor Plates Etc Complete In All Respect. , Supply And Fixing Of Factory Wired Integral Led Flood Light Luminaires With Die Cast Aluminium Body With Toughend Glass/Uv Stabilized Pc Cover And Lenses Built With Mandatory Driver Set Suitable For 170 To 200 Watt Confirming To Ip 66 And Ik07 And Above Protection Complete In All Respect Including Labour. , Supply And Burring Of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length Up To 3000Mm, Outer Pipe 76Mm Inner Dia 38Mm Terminal Dia 12 Mm ,Outer Gi Pipe Of 16 Swg And Inner Gi Pipe Of 12 Swg With Hot Dip Galvanization Up To 100 Micron Filled With Crystalline Conductive Mixture (Ccm) Having Anti Corrosive & Conductive Property With 50 Kgs Activated Soil (Bfc) Capable Of Reducing The Soil Resistivity With Good Mixture Of Retaining Capacity Along With 30Cm Square C.I. Frame With Hinged Cover & Masonary Housing. (From Electrode Terminal To Switch Board, Cost Of 25 X 3 Gi. Strip Will Be Extra) Cpri Approved , Providing And Laying Earth Connection From Earth Electrode With 4.00 Mm Dia Copper Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Copper Thimble Excavation And Re-Filling As Required. , Supply And Fixing Of Single Unit Led Aviation Obstruction Light Complete With Transformer And Led Spiral Etc. , Supply And Fixing Following Capacity Of Automatic Street Light Cubicle Control Panel Painted With Anticorrosive Alkali And Acid Proof Paint Consisting Of Time Switch Tso 100 Series With Contactors, Hrc Fuses, Isolating Switch Metering Instrument & Instrument Box With Cts Etc. In Case Of Tpn, Complete In All Respect. 25 A Tpn , Supply And Laying Of 16Sq. Mm 4 Core Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. , Supply And Laying Of 25Sq. Mm 3-1/2 Core Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. , Supply And Laying 25Mm X 5Mm G.I. Strip At 0.50 Mtr. Below Ground As Strip Earth Electrode, Including Connection /Terminating With G.I. Nut, Bolt Spring, Washer Etc As Required . , Add 18% Gst
Contract Date: Jul 06, 2026 Contract Value : 8.97 Lakh
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 2.19 Lakh
Boards / Undertakings / PSU No of Bidders 1
39.
Heavy Industries and Public Enterprises #11366183 Technical Bid
Tender for Dismantling Of Existing Distribution Board, Supply,Erection, Testing And Commissioning Of New Distribution Boards At Kamco Ltd, Athani , Supply, Erection, Testing And Commissioning Of The Following Recessed, Double Door Type Mcb Distribution Boards (Legrands) Consisting Of Copper Busbars , Neutral Link, Earthing Link With Mcb Isolator+Rccb On The Incomer Side And Mcbs On The Outgoing Side ,The Work Includes Termination Of Incoming And Outgoing Wires, Conduits And Earth Wire Except Armoured Cables. , Vdb 6 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 32A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 4 No. 16A Sp, 10Ka, Mcb - 6 No. , Vdb 6 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 32A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 3 No. 16A Sp, 10Ka, Mcb - 9 No. , Vdb 6 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 32A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 2 No. 16A Sp, 10Ka, Mcb - 12 No. , Vdb 8 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 40A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 8 No. , Vdb 8 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 40A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 32A 3P, 10Ka, Mcb - 1 No. 25A 3P, 10Ka, Mcb - 7 No. , Vdb 8 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 40A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 5 No. No 1 16A Sp, 10Ka, Mcb - 9 No. , Vdb 8 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 40A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 3 No. 16A Sp, 10Ka, Mcb - 15 No. , Vdb 8 Way Tpn, Double Door Vdb Consisting Of The Following Incomer: 32A 4P Mcb Iso. + 40A 4P 100Ma Rccb Outgoings: 25A 3P, 10Ka, Mcb - 2 No. 16A Sp, 10Ka, Mcb - 18 No. , Ldb 8Way Tpn, Double Door Db Consisting Of The Following Incomer: 32A 4P Mcb Iso. + 40A 4P 30Ma, Rccb Outgoings: 6/10A Sp, Mcb - 24 Nos. , Ldb 4Way Tpn, Double Door Db Consisting Of The Following Incomer: 32A 4P Mcb Iso. + 32A 4P 30Ma, Rccb Outgoings: 6/10A Sp, Mcb - 12 Nos. , Armoured Cables Supply And Laying Of Xlpe Insulated And Pvc Sheathed Armoured Power Cable (Gloster) Of Best Conductivity Aluminium/ Copper, 1.1Kv Grade Conforming To Is7098. (Conductor Conforming To 8130, Insulation Xlpe, Inner Sheath Is7098, Armouring Galvanised Steel Strip /Wire, Outer Sheath As Per 5831 ) In Cable Tray/ Wall Using Gi/Painted Ms Clamps Not Exceeding 60Cms Making Good The Damages, Color Washing Etc As Required As Per Specifications. , 4C X 16Sq.Mm A2xfy , 4C X 10Sq.Mm A2xfy. , 4C X 6Sq.Mm A2xfy. , 4C X 4Sq.Mm A2xfy. , L.T. Cables Termination Supply & Providing Cable End Termination With Single Compression Gland (Dowells / Hmi) And Cu/Al Lugs For The Following Sizes Of Lt, Xlpe / Ayfy Cables Including Gland Earthing, Etc. , 4C X 16Sq.Mm A2xfy , 4C X 10Sq.Mm A2xfy. , 4C X 6Sq.Mm A2xfy. , 4C X 4Sq.Mm A2xfy , Earthing Supply, Laying & Clamping At Site Of Copper /Gi Earthing Conductors Inclusive Of Providing Earthing Terminations And Bracing Of The Terminations Using Necessary Clamps, Screws And Bolts , Pvc Sleeves, Etc. , 10Swg Copper Wire , 30 Cm Long 25X 3Mm Copper Strip Earth Bench (Tinned) With 12 Nos Of Holes With Supporting Epoxy Insulator. , Miscellaneous Items. , Dismantling Of Existing Sdbs Including Incoming And Outgoing Cable Terminations, Earthing, Etc. , Preparation Of All Schematic / Physical Drawings, Submitting And Getting Scheme Approval From The Deputy Chief Electrical Inspector, Ernakulam Including All Incidental Expences. All Statutory Payments Will Be Reimbursed On Production Of The Receipts. , Preparation Of As-Fitted Drawings, Preparation Of Completion Report, Arranging Inspection And Obtaining Energisation Order From Deputy Chief Electrical Inspector, Ernakulam Including All Incidental Expences. All Statutory Payments Will Be Reimbursed On Production Of The Receipts
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
42.
Home Affairs #11359895 AOC
Bids Are invited for Item For Field Equipment Restoration 3 Pol Mcb - 63 . 03 Pol Mcb 3-Phase Rated Voltage 415V Ac/400V Ac Frequency 50/60 Hz , 3 Core Armed Aluminium Cable - Cable Size 10 Mm Square Type Steel Wire Armoured Swa Conductor Material Aluminium Insulation Xlpe Or Pvc Armour Galvanized Stell Wire Outer Sheath Pvc Lszh Voltage Rating 0 Point 6 To 1Kv (600/1000V) Temp Rating 70 Digree To 90 Digree ,Core Option - 3 Core , Standards - Iec60506, Bs 5467, Iec 60228 , Slim Dc Power Supply Variable Up To 30V 5A - 1.0-30V 0-5 Fully Variable Power Supplyauto Cv Cc Mode2.Panel Lock Facility,Fine & Coarse Control,Adjustable Ovp,Ocp & Opp Rangeover Current,Over Voltage,Over Power,Over Temperature,Protection3.Output Volatage 150W , L-2 Switch - 10 Port With Poe- 8X101001000base-Tpoe+ Port 2X1001000xsep Slot , Crimping Tool Kit Set Of 6 Items - 3-In-1 Crimping Tool, Lan Cable Tester, Wire Stripper Tooldual Tip Screw Driver, Punch Down Tool, Lan Cutter , Laser Distance Meter - Display Type-Lcd Display Size-2.0 Inch Range-80Mmin. Display Unit-0.001M Measurement Unit M Ft Inchmeasurement Basis Front Rear Accuracy (2Mm+5X10d)Laser Class 2 Laser Type 630-670Nm -1Mwauto Leveling Autometic Electronic Levellingdata Storage 99 Datasetsauto Back Light Off 10 Switch Out Operationtilt Angle 0-90 Degreeouter Protection Rubberrized Casing , Cl Meter , Multifunctional Network Tester , Non-Contact Voltage Tester - Safety Compliance Pollution Degree 2Operating 90 V Ac To 1000 V Ac Cat Iv 1000 V Ratedaltitude2000 M (Cat Iv 1000 V)Battery Life Typical Battery Life Of Great Than One Year , Professional Heat Gun , 6A 16A 240V Ac 3 Pin Nickel Plated Brass Adaptor , Insulation Tape Roll , Lane Tester , Clumping Tools , Electric Tester , Ofc Joint Coupoler Box , Odc Dc Fan , Patch Card For Odc Lc To Lc , Metal Juncation Box For Fix Camera , Body Cover Of Radio Set Tk 2317 , Armoured Power Cable Coper 2 Core , Lt Wire 8 10 Mm For Series Connector For Bty Copper Based , Fiber Clener Solution Liquid , Joint Closure 24 Core , Extension Board 10 Output 250 V With 2 Mtr Extension Cord Surge Protector , Whip Antenna Of Radioset Tk 2317 , Bty Lead Of Kw Tk7360 , Power Cable 2 Core Copper 4 Mm , Co-Xial Cable 52 Ohm Rg 58 , 12 V 2 . Dc Adapter , Mcb Box Enclosure As Per Site Requirement , 3 Core 6 Sqmm Copper Flexible Cable , Installation And Commissioning At Mandav And Pith Ur Total Quantity : 3097
Contract Date: Ref. Documents Contract Value : 15.25 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Madhya Pradesh View Result →
Contract Date: Jun 25, 2026 Contract Value : 97.23 Lakh
Boards / Undertakings / PSU No of Bidders 14
Madhya Pradesh View Result →
45.
Drinking Water Supply and Sanitation #11348134 Technical Bid
Tender for E-Quotation For Seeking Firm Rates Of Plant & Machinery And Materials Category Items For Preperation/Amendment Of Schedule Of Rate For The Year 2026. , M 1055 - Pumps Supplying Submersible Pump Sets Confirming To Is 8034 And Motor Confirming To Is 9283. Pump Shall Be Suitable For Various Delivery Head And Discharge With Stainless Steel Pump Shaft And Polypropylene/ Noryl Impeller. Motor Suitable For Working On 415V+10%, 3Ph, 50 Hz, A.C. Supply With Cable Guard, Thrust Carbon/ Fiber Bearing To Withstand Entire Hydraulic Thrust, Water Proof Winding Shall Be Provided. The Pump Set Shall Be Suitable For Direct Coupling. Pump Shall Have Suitable Outlet As Per Manufacturers Design. Anti Thrust Stream Lined Non Return Valve Shall Be Provided With Pump. 3 Meter Submersible Copper Conductor Cable In Single/ Double Run Shall Be Provided With Each Pump. , Submersible Pump Set 100 Mm Dia (With Polypropylene/ Noryl Impeller) Up To 20 Stages 1 H.P. , 1.5 Hp , 2.5 Hp , 3.0 Hp , 4.0 Hp , 5.0 Hp , Submersible Pump 150 Mm Dia (With Bronze/Ss Impeller) Up To 8 Stages , 1.5 Hp , 2.0 Hp , 3.0 Hp , 4.0 Hp , 5.0 Hp , 6.0 Hp , 7.5 Hp , M 1056 - Pressure Guage Providing Fabricating, Testing And Commisioning Pressure Vessel Fabricating In M.S Plate On Providing Foundation Including Epoxy Paint , Pressure Gauge (100 Mm Dia) , Pressure Gauge (150 Mm Dia) , Vacuum / Combination Gauge , M 1057 - Lifting Equipment Chain Pulley Block Supplying Triple Spur Gear Type Chain Pulley Block Suitable For Capacity As Below With 3 M Lift Complete With Load Chain And Hand Chain Suitable For Above Lift, Tested To 50% Over Load As Per Is 3832 Carrying Isi Mark. , 1 Tonne Capacity , 2 Tonne Capacity , 3 Tonne Capacity , Electric Operated Circular Or Rectangular Travelling Crane (Single Girder) Supplying Single Girder Electrically Operated Rectangular Over Head Travelling Crane With 6 M Lift Complete With Wire Rope Hoist, Class Ii Duty, All Three Motions Electrically Operated By Suitable Rating Motor Ip 54, Control Panel And Down Pendant Control Block. , 5 Tonne Capacity , Above 6 M Up To 8 M Span , Above 8 M Up To 10 M Span , 7.5 Tonne Capacity , Above 6 M Upto 8 M Span , Above 8 M Up To 10 M Span , 10 Tonne Capacity , Above 6 M Up To 8 M Span , Above 8 M Up To 10 M Span , M 1058 - Lightening Arrester, Ab Switch, Insulators , Lightening Arrestor Supplying, Erecting Approved Make Thyrite Type Lightening Arrestor Suitable For H.T. Supply With Necessary Ancillary Material Complete On Provided Cross Arm And Connected To Overhead Line. , Suitable For 11 Kv Supply, Distribution Class , Suitable For 22 Kv Supply, Distribution Class , Suitable For 33 Kv Supply, Station Class , Disc Insulator. Supplying, Erecting Porcelain Disc Type Insulators With Hardware Fittings Suitable For H.T. Overhead Line Complete Erected With Nuts And Bolts On Provided Cross Arm , Suitable For 11Kv Line , Suitable For 33Kv Line , Pin Insulator Supplying, Erecting Porcelain Pin Type Insulators With Hardware Fittings Suitable For H.T. Overhead Line Complete Erected With Nuts And Bolts On Provided Cross Arm , Suitable For 11Kv Line , Suitable For 33Kv Line , Air Break Switch Without Earth Switch Supplying, Erecting Approved Make H.T. Outdoor Type Gang Operated Air Break Triple Pole Switch Of Required Capacity With 3 Post / Pin Type Insulator Per Phase , Mounted In Horizontal Or Vertical Position On Provided Cross Arm With Adequate Length Of G.I. Pipe For Operating Handle Erected On Extended Square Shaft. The Operating Handle Provided With Lock And Key At Suitable Height From Ground With Necessary Clamps , Suitable For 11Kv Line , Rocking / Tilting Type , Rotating Type , Suitable For 33Kv Line , Rocking / Tilting Type , Rotating Type , Air Break Switch With Earth Switch Supplying, Erecting Approved Make H.T. Outdoor Type Gang Operated Air Break Triple Pole Switch With Earth Switch Of Required Capacity With 3 Post / Pin Type Insulator Per Phase , Mounted In Horizontal Or Vertical Position On Provided Cross Arm With Adequate Length Of G.I. Pipe For Operating Handle Erected On Extended Square Shaft. The Operating Handle Provided With Lock And Key At Suitable Height From Ground With Necessary Clamps , Suitable For 11 Kv Line , Rotating Type , Suitable For 33 Kv Line , Rotating Type , Drop Out Fuse (Channel Mounted) Supplying, Erecting Approved Make Out Door Type Drop Out Fuse Channel Type With Insulator Complete With Fuse Holders Fuse Barrel With Metal Fittings, Fuse Element, With Working Current Up To 50 Amp, Capacity Complete Erected On Provided Cross Arm, Each Set Comprising 3 Units , Suitable For 11 Kv Line , Suitable For 33 Kv Line , Horn Gap Fuse (Channel Mounted) Supplying, Erecting Approved Make Out Door Type Horn Gap Type Fuse With Insulator, Fuse Element, With Working Current Up To 50 Amp, Capacity Complete Erected On Provided Cross Arm, Each Set Comprising 3 Units , Suitable For 11 Kv Line , Suitable For 33 Kv Line , M 1059 - Transformer Power Transformer (With Off Load Tap Changer) Any Isi Mark , Supplying Outdoor Type Copper Wound Transformer Continuously Rated For 3Ph, 50 Hz, At Full Load And Temp. Rise Not Exceeding 45 Degree C By Thermometer In Oil And 50 Degree C By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Dy11, Ht Side Connected In Delta And Lt Side Connected In Star With Neutral Brought Out Connected To Provide Separate Earthing. The Transformer Shall Have Power Terminal Arrangement, Bushing/ Cable End Box On Ht Side And Cable End Box On Lt Side. 2 Nos Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer. The Transformer Should Have Following Standard Fittings. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specifications And The Load & No Load Losses Shall Be Limited To The Values Given Below Or As Per Is Or Norms Issed By Seb Which Ever Are Lower- 1. Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge. 2. Silica Gel Dehydrating Breather Charged With Silica Gel. 3. Oil Drain Valve 4. Oil Filter Valve 5. Lifting Eyes/ Hooks 6. Two Earthing Terminals 7. Diagram And Rating Plate 8. Air Vent 9. Explosion Vent 10. 100Mm Dia Thermo Meter With Thermometer Pocket 11. Four arc-biannual rate contract Directional Plain Roller. , Power Transformer 11000/433 Volts With Off Load Tap Changer - 12.5% To +2.5% In Steps Of 2.5% As Per Bis Level-2. , 63 Kva , 100 Kva , 160 Kva , 200 Kva , 250 Kva , 315 Kva , 500 Kva , 630 Kva , 750/800 Kva , Power Transformer (With On Load Tap Changer) Supplying Outdoor Type Copper Wound Transformer Continuously Rated For 3Ph, 50 Hz, At Full Load And Temp. Rise Not Exceeding 45 Degree C By Thermometer In Oil And 50 Degree C By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Dy11, Ht Side Connected In Delta And Lt Side Connected In Star With Neutral Brought Out Connected To Provide Separate Earthing. The Transformer Shall Have Power Terminal Arrangement, Bushing/ Cable End Box On Ht Side And Cable End Box On Lt Side. 2Nos Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer. The Transformer Should Have Following Standard Fittings. The Oltc Should Be Suitable For Minimum 50 Operations Per Day. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specifications And The Load & No Load Losses Shall Be Limited To The Values Given Below Or As Per Is Or Norms Issued By Seb Which Ever Are Lower- , 1. Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge. 2. Silica Gel Dehydrating Breather Charged With Silica Gel. 3. Oil Drain Valve 4. Oil Filter Valve 5. Lifting Eyes/ Hooks 6. Two Earthing Terminals 7. Diagram And Rating Plate 8. Air Vent 9. Explosion Vent 10. 100Mm Dia Thermo Meter With Thermometer Pocket 11. Four arc-biannual rate contract Directional Plain Roller. 12. Buchholz Relay 13. Resistance Temp. Detector 14. Marshalling Box 15. Automatic Voltage Regulator (Avr) 16. Remote Tap Changing Controller (Rtcc) , Transformer 11000/433 Volts With On Load Tap Changer - 15% To +5% In Steps Of 1.25% With Rtcc, Avr And Marshalling Box And Other Specification , 750/800 Kva , 1000 Kva , 1250 Kva , 1600 Kva , 2000 Kva , M 1060 - Motors Foot Mounted Motors Tefc 1500 Rpm Supplying Foot Mounted Tefc 1500 Rpm, Squirrel Cage Induction Motor, Conforming To Is 325 Having Continuous Rating Suitable For Operation At 415 Volts ± 10%, 3 Phase, 50 Hz ± 3% With F Class Insulation Temperature Rise Limited To Class B Insulation. Motors Conform To Is-12615 With Efficiency Level Ie3 And Provided With Enclosure Protection Class Ip-55. , 15 Kw (20 Hp) , 18.5 Kw ( 25 Hp) , 22 Kw ( 30 Hp) , 30 Kw ( 40 Hp) , 37 Kw ( 50 Hp) , 45 Kw ( 60 Hp) , 55 Kw ( 75 Hp) , 75 Kw ( 100 Hp) , 90 Kw ( 120 Hp) , 110 Kw ( 150 Hp) , 132 Kw ( 180Hp ) , 160 Kw ( 215 Hp ) , M 1061 - Aluminium Cable Cable - Aluminium Conductor Three Core, Xlpe / Pvc Insulated & Armoured Cable . Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Aluminium Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , 3 Core 50 Sq Mm , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , 3 Core 120 Sq Mm , 3 Core 150 Sq Mm , 3 Core 185 Sq Mm , 3 Core 240 Sq Mm , 3 Core 300 Sq Mm , 3 Core 400 Sq Mm , Ht Aluminium Three Core 3.3 Kve Cable Xlpe Insulated Supplying Ht Aluminium Three Core Cable Xlpe Insulated ,Insulation Screened With Extruded Semi Conducting Compound In Combination With Copper Tape (0.3 Ka For 1 Sec.) Cores Laidup Inner Sheath Of Pvc Tape ,Galvanised Steel Flat Strip Armoured,And Overall Pvc Sheathed Cable Conforming To Is :7098 /Ii/85 With Latest Amendments , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , 3 Core 120 Sq Mm , 3 Core150sq Mm , 3 Core 185 Sq Mm , 3 Core 240Sq Mm , 3 Core 300 Sq Mm , 3 Core 400 Sq Mm , M 1062 - Copper Cable Cable , 3 Core Pvc Insulated, Pvc Sheathed Copper Conductor Flat Submersible Cable . Supplying , Flat Flexible Submersible Cable With, Copper Conductor, Pvc Insulated, And Pvc Sheathed . , 3 Core 1.5 Sq Mm , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , Copper Conductor Three Core, Xlpe / Pvc Insulated & Unarmoured Cable Supplying Xlpe / Pvc Insulated, Unarmoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3 Core 1.5 Sq Mm , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , 3 Core 50 Sq Mm , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , Copper Conductor 3.5 Core, Xlpe / Pvc Insulated & Armoured Cable . Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark 3.5 Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner , 3.5 Core 25 Sq Mm , 3.5 Core 35 Sq Mm , 3.5 Core 50 Sq Mm , 3 .5 Core 70 Sq Mm , 3.5 Core 95 Sq Mm , 3.5 Core 120 Sq Mm , 3 .5 Core150sq Mm , 3.5 Core 185 Sq Mm , 3.5 Core 240Sq Mm , 3.5 Core 300 Sq Mm , 3.5 Core 400 Sq Mm , Copper Conductor 3.5 Core Xlpe/Pvc Unarmoured Supplying Xlpe / Pvc Insulated, Unarmoured Cable 1100 V Grade With Isi Mark 3.5 Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3.5 Core 25 Sq Mm , 3.5 Core 35 Sq Mm , 3.5 Core 50 Sq Mm , 3.5 Core 70 Sq Mm , 3.5 Core 95 Sq Mm , 3.5 Core 120 Sq Mm , 3.5 Core150sq Mm , 3.5 Core 185 Sq Mm , 3.5 Core 240Sq Mm , 3.5 Core 300 Sq Mm , 3.5 Core 400 Sq Mm , Copper Conductor Three Core, Xlpe / Pvc Insulated & Armoured Cable . Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3 Core 1.5 Sq Mm , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , 3 Core 50 Sq Mm , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , 3 Core 120 Sq Mm , 3 Core 150Sq Mm , 3Core 185 Sq Mm , 3 Core 240 Sq Mm , 3 Core 300 Sq Mm , 3 Core 400 Sq Mm , M 1063 - Foot Valve Supplying C.I. Foot Valve Having Single Leather Flap And Gunmetal Seating. Valve Shall Be Fixed On Suction Side Of Pump As Per Requirement Including Jointing Material And Hardware. , Flanged Type , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , M 1064 - Air Circuit Breaker Acb Breaking Capacity 50Ka Thermal Magnetic Manual Draw Out Type 3 Pole , 1000A , 1250A , 1600A , 2000A , M 1065 - Starter D.O.L. Starter With Ss Enclosure With 380/415 Volt Coil , 5 To 10 Hp , Supplying Fully Automatic Star Delta Starter To Operate Induction Motor Working On 415V,3Phase,50 Hz With No Volt Coil, Over Load Element, On-Off Push Buttons, With Necessary Materials And Connected To Supply, Etc Complete Starter With Original Sheet Steel Encloser F.A.S.D Starter , 10 Hp , 20 Hp , 25 Hp , 40 Hp , 50 Hp , 75 Hp , 100 Hp , 125 Hp , 150 Hp , 250 Hp , M 1066 - Servo Controlled Automatic Voltage Stabilizer Providing, Erecting Servo Controlled Automatic Voltage Stabiliser Suitable For Out Put Voltage Of 415 Volt ± 1%, 3 Ph, 50 Hz, With Copper Wound Transformer (Air/Oil Cooled) As Mentioned Below. The Stabilizer Shall Function Satisfactorily Even If Incoming Supply Is Unbalanced Between Phases Within Range Of 10%. The Stabilizer Should Be Constructed In Cubical Box, With Bidirectional Wheels For Easy Handling, Necessary Monitors And Users Controls On Front Panel Such As Indication, Alarm, Volt Meter And Selector Switch For Measuring Input And Out Put Voltage, Auto/Manual Selector Switch, Raise/Low Push Buttons Etc. Suitable Capacity Termination Strips And Bus Bars For Incoming And Out Going Cable Should Be Provided. All Three Phases Shall Be Independently Monitored And Corrected. Following Protections And Indications Shall Be Incorporated 􀂌 Over Voltage / Under Voltage 􀂌 Single Phasing 􀂌 Cut Off Contactor With Electronic Output Sensing Unit , Servo Controlled Automatic Voltage Stabiliser(Out Put 415 ± 1%) Input 150 / 220 To 450 / 460 Volt , 30 Kva Air Cooled , 40 Kva Air Cooled , 50 Kva Oil Cooled , 60 Kva Oil Cooled , 75 Kva Oil Cooled , 100 Kva Oil Cooled , 125 Kva Oil Cooled , Servo Controlled Automatic Voltage Stabiliser (Out Put 415 ± 1%) Input 280 To 450/460 Volt , 15 Kva Air Cooled , 20 Kva Air Cooled , 30 Kva Air Cooled , 40 Kva Air Cooled , 50Kva Air Cooled , 60 Kva Oil Cooled , 75Kva Oil Cooled , 100 Kva Oil Cooled , 125 Kva Oil Cooled , 150 Kva Oil Cooled , 200Kva Oil Cooled , M 1067 - Termination Kit Providing And Errecting In-Door Type Termination Kit, For 3.3Kv/ 6.6 Kv / 11Kv/ 22Kv/33Kv Xlpe Screened 3 Core Cable , In-Door Termination Kit For 3.3Kv(E/Ue) / 6.6 Kv(E) Xlpe 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Out-Door Termination Kit For 3.3(E/Ue)/6.6 Kv(E) Xlpe 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Straight Through Joint For 3.3Kv(E/Ue)/ 6.6 Kv(E) Xlpe 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-300 Mm² , In Door Termination Kit For 11Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Out Door Termination Kit For 11Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Straight Through Joint For 11 Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-300 Mm² , In Door Termination Kit For 22Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Out Door Termination Kit For 22Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Straight Through Joint For 22 Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-95 Mm² , 120-150 Mm² , 185-240 Mm² , 300-400 Mm² , In Door Termination Kit For 33Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-95 Mm² , 120-185 Mm² , 240-400 Mm² , Out Door Termination Kit For 33 Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-95 Mm² , 120-185 Mm² , 240-400 Mm² , Straight Through Joint For 33 Kv(E) Xlpe Screened 3 Core Cable , 35-70 Mm² , 95-150 Mm² , 185-240 Mm² , 240-300 Mm²
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
46.
Science and Technology #11347627 AOC
Bids Are Invited For Cleanroom Modular Wall Panels 100 Mm Thick Wall Panel , Cleanroom Modular Wall Panels 50 Mm Thick Wall Panel- For Civil Column Coverings Also , Cr Wall Panel Cpvc 25Mm Dia 2Mm Conduit For Electrical Switches 80-50Mm , Cleanroom Modular Ceiling Panels 50Mm Thick Ceiling Panel Area , Double Glazed Vision Panels 1000Mm X 1000Mm Double Glazed Vision Panel , Coving R70 - Aluminium Extruded Coving -Male - Female- Powder Coated With Accessories , Coving R90 - Aluminium Extruded Internal Coving Powder Coated With Accessories , Coving 2D-50Mm 3D-80 Mm- For R 70 - R 90 Coving To Concealed On The Corners , Coving -Cut-Outs In The Wall Panels And Ceiling Panels , R2 Return Air Raiser Size 600Mmx80mm Grill Size 650Mmx500mm , R2 Return Air Raiser Size 700Mmx200mm- Grill Size 750Mmx500mm , Cleanroom Scientific Doors- 1000Mmx 2100Mm Single Leaf Scientific Door , Cleanroom Scientific Doors -1200Mmx 2100Mm Single Leaf Scientific Door , Cleanroom Scientific Doors -1800Mmx 2100Mm Double Leaf Emergency Scientific Door , Cleanroom Scientific Doors- 1000Mmx2100mm Single Leaf Emergency Door , Cleanroom Scientific Doors- Double Side Operated Lock And Key With Ml 100D , Cleanroom Scientific Doors- Dc 60 Sm Door Closure , Cleanroom Scientific Doors - Ss 304 Ball Bearing Butt Hinges , Cr Scientific Doors - Double Glazed View Panels 350X750 With Tape And Sealants , Cleanroom Scientific Doors- Ss 304 Single Side D Handles 254 X 19 Mm Dia , Cleanroom Scientific Doors- Door Bottom Seals , Cleanroom Scientific Doors- Ss304 Push Plates , Cleanroom Scientific Doors- Ss304 Kick Plates , Cleanroom Scientific Doors- Tower Bolt , Cleanroom Scientific Doors- Double Point Panic Bar , Vinyl Flooring -Esd Flooring , Dynamic Pass Box Nflp- Working Area- 600W X 600D X 600Hmm 2 Way , Air Shower Nflp- Working Area- W 800Mm X D 900Mm X H 2000 Mm 2 Way , Dynamic Garment Cabinet- Internal Dimension- 1200 Mm W X 450 Mm D X 1800 Mm H , Dynamic Garment Cabinet-Air Curtains , Ss Furniture-Ss Cross Over Bench 2 Meter Length 2000X500x350 , Ss Furniture- Ss Chairs , Ss Furniture- Ss Tables , Ahu-01 Recirculation Type 19500 Cfm Static-180 Dehumidifier-13934 Cfm 44Tr 87Kw , Ahu Pre-Cooling Unit 19500 Cfm Capacity Fresh Air- 900 Cfm Cooling- 11Tr , Ahu-02 Recirculation Type 700 Cfm Ahu Static- 150 Cooling Tr- 6 , Air Distribution- 24-Gauge Sheet Ducting Upto 750 Mm Duct Width , Air Distribution- 22-Gauge Sheet Ducting 750 Mm To 1200 Mm Duct Width , Air Distribution- 20-Gauge Sheet Ducting 750 Mm To 1200 Mm Duct Width , Air Distribution - Ms Angle Frame For Ducting With Red Oxide And Epoxy Paint , Duct Insulation System-Supply Duct With 19 Mm Thick Insulation , Duct Insulation System-Return Duct With 13 Mm Thick Insulation , Duct Insulation System-Aluminium Foil Tapes For Covering The Joints Each Roll 50 Rmt , Fire Damper 18G Gi Sheet Al Blades 150Mm Chrome Spindles 120Min Ul-555 Rated , Fire Damper- Fusible Link And Spring Mechanism , Fire Damper- Limit Switch , Volume Control Damper , Hooded Type Hepa Filters- 450Mm X 450Mm X 152Mm Hepa Filter , Hooded Type Hepa Filters- 610Mm X 1210Mm X 152Mm Hepa Filter , Supply Air Diffusers- 300Mm X 300Mm Neck Size 4-Way Square Diffusers , Duct Mounted Heaters - Thyristor Type Non-Flame Proof- 35 Kw Duct Mounted Heater , Condensing Units- 11 Tr Condensing Units , Condensing Units- 11 Tr Condensing Unit For Pre Cooling Unit , Condensing Units- 3 Tr Condensing Units , Condensing Units- Copper Piping With Accessories At Actual Measurements , Magnehelic Gauge Dial Type With Ss Box Pressure Range 0 To 10Mm , Temperature And Rh Indicators , Validation And Documentation , Mv-Lv-Pcc-Mcc Panels-Main Mvp Panel-01 , Mv-Lv-Pcc-Mcc Panels- Ups O-P Sync Panel-Db-01 , Mv-Lv-Pcc-Mcc Panels- Ahu Control Panel-01 , Mv-Lv-Pcc-Mcc Panels-Ahu Control Panel-02 , Lt Db 3Ph 6-Way Vtpn-Etpn-Fabricated 63A Tpn 10Ka Mcb Incomer - Rpdb-01 , Lt Db 3Ph 6-Way Vtpn-Etpn-Fabricated 40A Fp Mcb Incomer - Rldb-01 , Lt Db 3Ph 6-Way Vtpn-Etpn-Fabricated 63A Tpn 25Ka Mccb Incomer - Epdb-01 , Lt Db 3Ph 6-Way Vtpn-Etpn-Fabricated 40A Fp Mcb Incomer - Eldb-01 , Lt Db 3Ph 12-Way Vtpn-Etpn-Fabricated 125A Tpn 36Ka Mccb Incomer - Etpdb-01 , Ups 160Kva 3Ph In-3Ph Out With 30 Min Backup Battery Bank And Rack - Ups-01 , Cleanroom Light Fixtures- 20W Lights In New Room , Cleanroom Light Fixtures- 20W Lights In Room D , Cleanroom Light Fixtures - 40W Led Bottom Openable 600Mmx600mm For Rooms And Walk Area , Switch Socket 3Ph 63A 5Pin Industrial With Mcb And Plug Top - Ss Cover Plate , Switch Socket 3Ph 32A 5Pin Industrial With Mcb And Plug Top - Ss Cover Plate , Switch Socket 1Ph 25A 3Pin Industrial With Dp Mcb And Plug Top - Ss Cover Plate , Switch Socket 1Ph 6Module 6-16A With Polycarbonate Plate - Rps Power , Switch Socket 1Ph 6Module 6-16A With Polycarbonate Plate - Ups Power , Switch Socket 1Ph 3Module 6-16A With Polycarbonate Plate - Rps Power , Switch Socket 1Ph 2Module 6A One-Way With Polycarbonate Plate - Raw Power Light , Switch Socket 1Ph 2Module 6A One-Way With Polycarbonate Plate - Ups Power Light , Switch Sockets- Single Phase 6Module Surface Mounting Pvc Boxes With 6-16A Switch Sockets , Switch Sockets- Single Phase 3Module Surface Mounting Pvc Boxes With 6-16A Switch Sockets , Lt Cable- 3.5Cx300 Sqmm A2xfy Al. Armoured Xlpe Cable 2 Runs , Lt Cable- 3.5Cx240 Sqmm A2xfy Al. Armoured Xlpe Cable , Lt Cable- 1Cx150 Sqmm Yy Cu. Flexible Cable , Lt Cable- 4Cx35 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Lt Cable- 4Cx25 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Lt Cable- 4Cx10 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Lt Cable- 4Cx6 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Lt Cable- 4Cx4 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Lt Cable- 4Cx1.5 Sqmm. 2Xwy Cu. Armoured Xlpe Cable , Lt Cable- 5Cx4 Sqmm. Cu. Flexible Cable , Lt Cable- 3Cx4 Sqmm. Cu. Flexible Cable , Lt Cable- 3Cx2.5 Sqmm. Yy Cu. Flexible Cable , Lt Cable- 3Cx1.5 Sqmm. Yy Cu. Flexible Cable , Lt Cable- 1Cx6 Sq.Mm Yy Cu. Flexible Green Wire , Lt Cable- 1Cx4 Sq.Mm Yy Cu. Flexible Green Wire , Lt Cable- 1Cx2.5 Sq.Mm Yy Cu. Flexible Green Wire , Cable Terminations- Termination Of 3.5Cx300 Sqmm A2xfy Al. Armoured Xlpe Cable , Cable Terminations- Termination Of 3.5Cx240 Sqmm A2xfy Al. Armoured Xlpe Cable , Cable Terminations- Termination Of 1Cx150 Sqmm Yy Cu. Flexible Cable , Cable Terminations- Termination Of 4Cx35 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Cable Terminations- Termination Of 4Cx25 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Cable Terminations- Termination Of 4Cx10 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Cable Terminations- Termination Of 4Cx6 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Cable Terminations- Termination Of 4Cx4 Sqmm 2Xwy Cu. Armoured Xlpe Cable , Cable Terminations- Termination Of 5Cx4 Sqmm. Yy Cu. Flexible Cable , Cable Terminations- Termination Of 3Cx4 Sqmm. Yy Cu. Flexible Cable , Cable Terminations- Termination Of 4Cx1.5 Sqmm. 2Xwy Cu. Armoured Xlpe Cable , Cable Terminations- Termination Of 3Cx2.5 Sqmm. Yy Cu. Flexible Cable , Cable Terminations- Termination Of 3Cx1.5 Sqmm. Yy Cu. Flexible Cable , Cable Terminations- Termination Of 1Cx6 Sq.Mm Yy Cu. Flexible Green Wire , Cable Terminations- Termination Of 1Cx4 Sq.Mm Yy Cu. Flexible Green Wire , Cable Terminations- Termination Of 1Cx2.5 Sq.Mm Yy Cu. Flexible Green Wire , Cable Trays And Its Earth Strips- 400X50x2mm Hot Dip Galvanized Ladder Type Cable Tray , Cable Trays And Its Earth Strips- 300X50x2mm Hot Dip Galvanized Perforated Type Cable Tray , Cable Trays And Its Earth Strips- 100X50x2mm Hot Dip Galvanized Perforated Type Cable Tray , Cable Trays And Its Earth Strips- 50X35x2mm Hot Dip Galvanized Perforated Type Cable Tray , Cable Trays And Its Earth Strips- 300X10x1.2Mm Gi Cable Tray Cover , Cable Trays And Its Earth Strips- 100X10x1.2Mm Gi Cable Tray Cover , Cable Trays And Its Earth Strips- 50X10x1.2Mm Gi Cable Tray Cover , Cable Trays And Its Earth Strips- 400X50x2mm Hot Dip Galvanized Ladder Type Cable Tray Bends , Cable Trays And Its Earth Strips- 300X50x2mm Hot Dip Galvanized Perforated Type Cable Tray Bends , Cable Trays And Its Earth Strips- 100X50x2mm Hot Dip Galvanized Perforated Type Cable Tray Bends , Cable Trays And Its Earth Strips- 50X35x2mm Hot Dip Galvanized Perforated Type Cable Tray Bends , Supply And Installation Of Earthing- 50X6mm Gi Earth Strip - Hot Dip , Supply And Installation Of Earthing- 25X3mm Gi Earth Strip - Hot Dip , Earthing - Copper Bonded Rod 254 Microns Ul Listed With Rcc Pit Chamber 450Mmx450mm , Pvc Frls Conduit Heavy Duty 25Mm Dia 1.5Mm Thick Rigid Grey With Accessories , Pvc Frls Conduit Heavy Duty 19Mm Dia Flexible Black With Bends And Accessories , Safety Electrical Items- 2000X1000x6mm Thick Corrugated Rubber Mats , Safety Electrical Items- Start-Stop Remote Pushbutton Stations - Ip66 , Civil Works - Demolishing And Construction , Statutory And Miscellaneous Total Quantity : 20237
Contract Date: Ref. Documents Contract Value : 2.91 Crore
Government Departments No of Bidders 10
47.
Petroleum and Natural Gas #11346768 AOC
Bids Are invited for Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A-1) 4 core 4 Sq. mm , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (a) 3 core 2.5Sq. Mm , Laying of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 25 Sq. mm , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (D) 3 core 10 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (a) 2 to 4 core 2.5/ 4 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A)3 core 2.5 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 4 core 25 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 3 core 10 Sq. mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A)4Sq.mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 2.5 Sq.mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 25 Sq.mm. , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm , Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground. , Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground. , Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cm. layer of sand above & below cable (16 bricks per meter) , Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 50 K.A. and above at 415 V having Normal current rating 400A with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing [ ICS=100% of ICU only, Cat III] , Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. , Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , Disconnecting the cable connection and Providing straight joint with PVC mould using heat shrink /cast resin type epoxy compound Insulating material and making the joint complete using necessary in line connectors, hardener, earth continuity connection, spacers etc. and reconnecting the same & ensure the joint resistance within the limits as per IS. (B)3.5C 50 Sq. mm cable. , Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge.(5) 300 X 50 X 2.0 mm Thick , Providing and fixing approved make 90° Elbow for Perforated C type cable tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. (5) 300 X 50 X 2.0 mm Thick 90° Elbow , Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge. (2) 100 X 50 X 1.6 mm Thick , Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete. , Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole muffing or any other purpose.
Contract Date: Ref. Documents Contract Value : 9.58 Lakh
Boards / Undertakings / PSU No of Bidders 4
48.
Defence #11344734 AOC
Bids Are Invited For Pvc Insulated Aluminium Cable Single Core And Multi Core Circular Sheathed With Rigid Conductor Isi Marked To Is 694 (Q2) , Miniature Circuit Breakers (Mcb) For Ac Operation Marked To Is/Iec 60898 (Part 1) (Q2) , Pvc Insulated Copper Cable Single Core And Multi Core Circular Sheathed With Flexible Conductor (V2) Isi Marked To Is 694 (Q2) , Xlpe Cable For Working Voltage Up To And Including 1.1 Kv Marked To Is 7098 (Part 1) (Q2) , Moulded Case Circuit Breakers (Mccb) Conforming To Is/Iec 60947 (Part 2) (Q2) , Cp Pillar Cock Brass 15 Mm , Cp Long Body Bib Tap 15 Mm , Bathroom Looking Mirror 600 Mm By 450 Mm , Cp Bib Tap Cp 15 Mm Dia , Cp Bathroom Water Shower 125 Mm Dia , Kitchen Shelving Plate Rack 24 By 24 By 10 , Curtain Rod Decorative Type 25 Mm Dia , Cp Swan Neck Movable Taps For Sink Wall Mounted , Health Faucet With Hook 1 Point 5 Mtr , Cp Bib Tap 15 Mm 2 In 1 , Cp 2 In 1 Angle Valve 15 Mm , Pvc Water Tank Cover Lid 500 Oblique1000 Ltr , Cp Angle Valve 15 Mm , Cp Towel Rail 450 Mm , Ewc Seat Cover Plastic , Cp Soap Dish , Helical Door Spring , Wall Mixer 3 In 1 With Hand Shower , Wire Mesh Galvanised Steel , Wash Hand Basin 550 Mm By 400 Mm , Cp Grating 100 Mm With Hole , Cp Stop Cock 15 Mm External Thread , Cp Waste Coupling 32 Mm , Ewc With S Trap , Door Handle Aluminium 125 Mm , Toilet Paper Holder , Pvc Bib Tap 15 Mm , Sliding Door Bolt Ss 150 Mm Long , Ptmt Pillar Cock 15 Mm , Ptmt Bib Tap 15 Mm , Plain Glass 1199 By 900 By 3 Mm , Curtain Bracket 25 Mm , Glass Pane Frosted 3 Mm Thick Of Size 4 Feet By 3 Feet , Kitchen Sink Coupling 4 Inch , Door Handle Aluminium 150 Mm , Float Valve Brass 20 Mm , Pvc Waste Pipe 32 Mm , Tower Bolt Aluminium 150 Mm , Glass Oil Putty , Door Stopper 200 Mm Long , Gate Valve 15 Mm Brass , Cp Stop Cock 15 Mm Enternal Thread , Tower Bolt Ms 200 Mm Long , Jet Spray For E Type Wc , Cp Urinal Spreader Male 15 Mm Dia , Cp 15 Mm Turbo Washing Machine Cock , Ss Connection Pipe 600 Mm Long , Sink Cock With Cp Flange With Aerator Spout Faucet , Led Flood Light 300 Watts , Led Street Light 70 Oblique 72 Watts , Led Lamp 11 Oblique 12 Watts , Led Flood Light 350 Watts , Led Flood Light 150 Watts , Led Street Light 25 Watts , Mcb Tpn 63 Amp , Led Street Light 30 Watts , Led Flood Light 240 Oblique 250 Watts , Led Flood Light 120 Watts , Led Lamp 9 Oblique 10 Watts , Cable Aluminum Armoured Xlpe Pvc Insulated 2 Core Into 10 Sqmm , Led Garden Light 25 Watts , Cable Aluminum Armoured Xlpe Pvc Insulated 3 Point 5 Core Into 35 Sqmm , Led Lamp 7 Watts , Led Lamp 5 Watts , Bollard Light 9 W , Mcb Sp 16 Amps , Mcb Spn 63 A , Mccb 630 A 50 Ka 3 P , Mccb 100 A 35 Ka Tpn , Led Post Top Lantern 30 Watts , Cable Almunium 2 Core Into 10 Sqmm , Led Flood Light 50 Watt Total Quantity : 6241
Contract Date: Ref. Documents Contract Value : 46.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
49.
Defence #11344413 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Hard/Dense Soil, Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Excavating In Post Holes Each N Exc 0.5 Cum Getting Out, Returning Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceedings 25Cm Watering And Removing Surplus Soil To Distance N Exc 50 M And Making Good Surface In Hard/Dense Soils Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Timber Scantling 40 Sqcm And Over In Section In Any Position Framed Work, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Unframed Work In Fillets, Rails, Posts, Rafters, Purlins Etc Under 40Sqcm In Section, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Boarding Any Description, Fixed With Any Position With Nails, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness Including Nanital Pattern Or Similar Pattern Roof Covering, Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface, Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Plain Cement Concrete Type C2, 1:3:6 (40Mm Graded Aggregate) (M-10) As In Foundation , Filling And Mass Concrete And Similar Work , All As Specified And Directed. , M&L Foer Plain Cement Concrete Type B2, 1:2:4 (40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete, Complete All As Specified And Directed. , M&L For Type C1, 1:3:6 (20Mm Graded Aggregate) Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Mortar, Complete Complete All As Specified And Directed. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangula Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Wall/Ceiling Panelling And Similar Work Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cemtn And Fixing At Sit Eon Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thnick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Work As Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed By Engr-In-Charge. , S&F Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required Hooks (Stay), Heavy, For Large Gates; Hook And Pintle Hinges: Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165, Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Plate Girder Or Single Stanchions Built Up Of One Beam Or Channel Section With Flange Plates, Caps, Bases, Splices, Angle Brackets, Cleats And Other Connections Conforming To Fe-290Complete All As Specified And Directed. , S&F For S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161 1979 Grade St.-240, Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap,Fixed With Coach Screws And Washers In Roof, Walls Etc With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F 0.80Mm Thick Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Sub Base Or Flooring Complete All As Specified And Directed By Engr-In-Charge. , M&L For 100Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Stone Aggregate) As In Floors Or Sub Base, Complete All As Specified And Directed. , M&L For 25Mm Thick Plain Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For 40Mm Thick Plain Cement Concrete Type B-0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Tiles In Vertical Surface 350X 250X 7Mm/ 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick(Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Virified Ceramic Tiles 10 Mm Thick, Light Shade (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 As Backing Coat Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete Complete All As Specified And Directed. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc.Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistance Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of Old Wooden Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Zinc Crome Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: - One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 10 Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- As Approved Make Of Db , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 16 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 4 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
50.
Rural Development #11341439 Price Bid
Tender for Providing Street Light Maintanace Material And Services At Koregaon Bhima Tal Shirur Dist Pune , Supplying And Erecting Modulartype Switch6a / 10A Isimark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete.(8-1-2) , Supplying And Erecting Street Light Bracket For Erection Ofsingle Fitting Made From 40 Mm. Dia ‘B Class G.I. Pipe 1.0 M In Length Along With Pole Cap Of 300 Mm Length 100 Mm Dia Duly Welded As Per Specification No. , Providing Cement Concrete Foundation Including Excavationfor The Poles 60 Cm X 60 Cm X 1.5 M Deep In 1:3:6 Cement Concrete (20 X 25 Mm Stone Metal) And 45 Cm X 45 Cm X 45 Cm/45 Cm Dia. X 45 Cm Height Plinth Duly Plastered And With Necessary Curing And Finishing In An Approved Manner.(For 8.5 To 9 M Poles) (16-3-2) , Supplying And Erecting Steel Tubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness (4.5 + 1.75 + 1.75M) Length Respectively And Total 8 M Long With Pole Cap, Base Plate In Provided Foundation.(Weight 101 Kg.) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm. Dia With 4.5 X 4.5 X 3.65 Mm Thickness ( 5 + 2 + 2M ) Length Respectively And Total 9 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 147 Kg) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm Dia. With 4.5 X4.5 X3.65 Mm Thickness (5.60 + 2.7 + 2.7 M) Length Total 11 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 175 Kg.) As Per Specification No. . Oh-Pl/Stp , Supplying And Erecting Street Light Bracket Made From 25Mm. Dia ‘BClass G.I. Pipe, 0.6M. In Lengthalong With Polecap Of 300 Mm Length And 80 Mm Dia Duly Welded With Provided Leads As Per Specification , Supplying,Tpmcb 40A To 63A In Provided Distribution Board , Providing Pair Of Duly Tested Rubber Hand Gloves As Per Is:4770 Suitable For Working Upto 22Kv Supply. , Supplying And Erecting Insulated D.P. Switch Surface Type/Flush Type 32A 240Vwith Indicator Lamp & Fuse , Supplying H.C. Pattern Porcelain Fuse Bridge Swith Base & Hc Type Fuse Links240v 32A , Supplying And Erecting Programmable Digital Almanactimer Microcontroller Based With Real Time Clock To Operate On Derived Switching On & Switching Off Street Light As Per Daily Sunset And Sunrise Respectively , 1.25 Mm Crca Sheet Metal Enclosures With 20A. , Supplying Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv (1-3-29) , Supplying And Erecting Led Street Light Fitting Suitable For 60W Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink 2-9-5 , Supplying And Erectingled Street Light Fitting Suitable For 26W To 36W Led Street Light, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink 2-9-5 , Supplying And Erectingled Street Light Fitting Suitable For 90 W Led Street Light, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink 2-9-5 , Supplying And Erecting Led Flood Light Fitting Of 120W, Including Lamp, With providing fixing 0.95,Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification No Fg Odf/Fls-2 , Supplying & Laying Pvc Armoured Cable 4Core 6Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 10 Sq Mm 7-1-15 , Supplying & Laying Pvc Armoured Cable 2Core 10 Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 16 Sq Mm , Supplying, Erecting & Marking Spmcb 6A To 32A, B- Series (For Lighting) 5-3-3 , Supplying, Erecting & Marking Dpmcb 6 A To 32 A Bseries (For Lighting) 5-3-7 , Supplying, Erecting & Marking Tpmcb 6 A To 32Amp In Provided Distribution Board 5-3-14 , Supplying, Erecting & Marking Fpmcb 40A To 63A In Provided Distribution Board 5-3-17 , Supplying & Erecting Crimping Type Aluminium Lugs For Cable Upto 16 Sq Mm Complete 7-10-1 , Supplying & Erecting Crimping Type Coper Lugs For Cable Upto 1.5 To 6Sq Mm Complete... , Supplying And Erecting Two Pole Power Contactor 250V 32A For Time Switch Complete Erected On Wooden Block/Provided Box, With Necessary Materials. 4-4-3 , Supplying & Erecting Mains With2x1.5 Sq.Mm F.R Copperpvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole 1-3-3 , Supplying And Erecting Mains With Isi Mark Wp2 X 6 Sq. Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg 1-4-3 , Supplying And Erecting Mains With Isi Mark Wp2 X 2.5 Sq Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire , Supplying And Erecting Mains With Isi Mark Wp2 X 10.00 Sq Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire , 25 Amp, 32 annual periodical maintenance Three Phase L/T Contactor , 2.5 Sq. Mm Multistand Copper Wire , Insulation Tape , Water Proof Tape , Cable Joint Kit Upto 16 Sq. Mm Cable , Street Light Pole Box Frp , Cement Street Light Pole Clamp , M.S. Street Light Pole Clamp , Servicing And Primary Maintenance Of Street Light Pole 1 Vis , Supplying And Laying (Including Excavation Of Suitable Width & , Servicing And Primary Maintenance For Street Light Pole. , Light Poles Painting In Silver Colour , 26W Led Light To 100W Led Light Repairing , Old Pole Shifting, Rework And Foundation Work Per Pole Etc. , Supply &Fixing Of Shakle Hardware With Nut Bolt , Supply And Installation Of Mini Feeder Pillar With Stand , Reinforced Cement Concrete Road Cheasling Charges With Tractor Breaker (1 Hours , Tree Triming For Overhead Line , Supplying And Erecting Solar Panel Comprising , Supplying And Erecting Approved Makebattery With Capacity , Servicing And Primary Maintenance Of Solar Light Pole 1 , Solar Light Fixture With Light 9W / 12W Aluminim Dia Casting With Charge Controller & Lithinium Battery With Auto On / Off System.. , Providing Rental Basis Hydraulic Bucket Vehicle Of Highth 13 , 7-1-33 Supplying, Erecting & Terminating Xlpe Armoured Cable 4 Core 70 Sq. Mm. Aluminium Conductor With , 7-1-31 Supplying, Erecting & Terminating Xlpe Armoured Cable 4 Core 35 Sq. Mm , 7-1-34 Supplying, Erecting & Terminating Xlpe Armoured Cable 4 Core 95 Sq. Mm , 7-1-35 Supplying, Erecting & Terminating Xlpe Armoured , 5-3-4 Supplying, Erecting & Marking Spmcb 40A To 63A C- Series (For Motor/Power) In Provided Distribution Board As Per Specification No. Sw-Swr/Mcb , 5-3-5 Supplying, Erecting & Marking Spmcb 40A To 63A, B- Series (For Lighting) In Provided Distribution Board As Per Specification No. Swswr/ Mcb , 5-3-8 Supplying, Erecting & Marking Dpmcb 40A To 63A, C- Series (For Motor/Power) In Provided Distribution Board As Per Specification No. Sw-Swr/Mcb , 5-3-9 Supplying, Erecting & Marking Dpmcb 40A To 63A, B- Series (For Lighting) In Provided Distribution Board As Per Specification No. Swswr/ Mcb , 5-3-15 Supplying, Erecting & Marking Tpmcb 40A To 63A In Provided Distribution Board As Per Specification No. Sw- Swr/Mcb , 5-3-17 Supplying, Erecting & Marking Fpmcb 40A To 63A In Provided Distribution Board As Per Specification No. Sw- Swr/Mcb , 5-3-27 Supplying, Fixing And Commissioning Mcb Type Change Over Switch 2 Pole, 25 A With 3 Positions (I-O-Ii) With Centre Off Position As Per Specification No. Sw- Swr/Mcbcos , 5-3-28 Supplying, Fixing And Commissioning Mcb Type Change Over Switch 2 Pole, 40 A With 3 Positions (I-O-Ii) With Centre Off Position As Per Specification No. Sw- Swr/Mcbcos , 5-3-29Supplying, Fixing And Commissioning Mcb Type Change Over Switch 2 Pole, 63 A With 3 Positions (I-O-Ii) With Centre Off Position As Per Specification No. Sw- Swr/Mcbcos , 5-3-32 Supplying, Fixing And Commissioning Mcb Type Change Over Switch 4 Pole, 63A With 3 Positions (I-O-Ii) With Centre Off Position As Per Specification No. Sw- Swr/Mcbcos , 7-9-4 Supplying & Erecting Crimping Type Copper Lugs For Cable 50 Sq. Mm. Complete As Per Specification No. Cb- Cl/Cu , 7-9-5 Supplying & Erecting Crimping Type Copper Lugs For Cable 70 Sq. Mm. Complete As Per Specification No. Cb- Cl/Cu , 7-9-7 Supplying & Erecting Crimping Type Copper Lugs For Cable 120 Sq.Mm. Complete As Per Specification No. Cb- Cl/Cu , 4-4-5 Supplying And Erecting Four Pole Power Contactor 430 V, 40 A For Time Switch Complete Erected On Provided Wooden Block/ Box, With Necessary Materials. , Supplying And Erecting Icdp Switch 10A To 63A , Cable Joint Kit For Armoured Cable 20 Upto 120 Sq. Mm Cable , Gi Tar , Ahuja Speaker System(Pa) 110W To 250W With Mic , Kit Kat Type Fuse 16A 32A 63A 120A , Taparia Tester , Spaner Set , Control Panel Hrc Fuse , Supplying And Erecting Transformer Fidder Piller , 5-2-19 Supplying & Erecting Street Light Control Panel In , 2-5-5 Supplying And Erecting Led Street Light Fitting Suitable , 40 -50 Watt Street Light , 50-60 Watt Flood Light
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
TenderDetail
Loading tenders